Evaluation of the genotype, environment and their interaction on carotenoid and ascorbic acid accumulation in tomato germplasm.

PubMed

Roselló, Salvador; Adalid, Ana Maria; Cebolla-Cornejo, Jaime; Nuez, Fernando

2011-04-01

Tomatoes are an important source of antioxidants (carotenoids, vitamin C, etc.) owing to their high level of consumption. There is great interest in developing cultivars with increased levels of lycopene, β-carotene or L-ascorbic acid. There is necessary to survey new sources of variation. In this study, the potential of improvement for each character in tomato breeding programmes, in a single or joint approach, and the nature of genotype (G), environment (E) and G × E interaction effects in the expression of these characters were investigated. The content of lycopene, β-carotene and ascorbic acid determined was very high in some phenotypes (up to 281, 35 and 346 mg kg(-1) respectively). The important differences in the three environments studied (with some stressing conditions in several situations) had a remarkable influence in the phenotypic expression of the functional characters evaluated. Nevertheless, the major contribution came from the genotypic effect along with a considerable G × E interaction. The joint accumulation of lycopene and β-carotene has a high genetic component. It is possible to select elite genotypes with high content of both carotenoids in tomato breeding programmes but multi-environment trials are recommended. The improvement of ascorbic acid content is more difficult because the interference of uncontrolled factors mask the real genetic potential. Among the accessions evaluated, there are four accessions with an amazing genetic potential for functional properties that can be used as donor parents in tomato breeding programmes or for direct consumption in quality markets. Copyright © 2011 Society of Chemical Industry.

Students' Perception of Industrial Internship Programme

ERIC Educational Resources Information Center

Renganathan, Sumathi; Karim, Zainal Ambri Bin Abdul; Li, Chong Su

2012-01-01

Purpose: An important aspect of an academic curriculum in higher learning institutions for technical disciplines is the industrial internship programme for students. The purpose of this paper is to investigate students' perception of the effectiveness of an industrial internship programme offered by a private technological university in Malaysia.…

Rehabilitation in children with juvenile chronic arthritis.

PubMed

Häfner, R; Truckenbrodt, H; Spamer, M

1998-05-01

Chronic childhood arthritis impairs joint function and may result in severe physical handicap. Joint pain and inflammation trigger a vicious cycle that often ends in joint damage and fixed deformities. A comprehensive rehabilitation programme must start early to restore loss of function and prevent permanent handicap. It is dominated by a physiotherapeutic regimen consisting of pain relief, movement expansion, training of muscular coordination and finally re-integration of a physiological movement pattern. The approaches of occupational therapy become integrated into the treatment programme, concentrating on joint protection and self-care training. Additional aids support the aim of joint restoration. They include individual splinting, adapted footwear and walking aids. Depending on the child's age and developmental status different aspects of rehabilitation dominate. Small children need adequate mobility to promote their psychosocial development. In later years integration into school life and the peer group becomes important. Adolescents require help for an adequate vocational training and self-care support. Last but not least, parental education and integration of the whole family into the rehabilitation programme markedly improve the patient's prognosis.

An Approach to the Internationalisation of the Curriculum: Sino-British Joint Efforts for Three Online Courses

ERIC Educational Resources Information Center

Yawan, Li; Ying, Li

2011-01-01

With a view to facilitating good practice and enhancing further exchanges and collaboration with the Open University UK, the Open University of China initiated a joint programme of training to offer online tutors and academic management staff three courses: Student Support, Tutoring On-line, and Course Design. The programme brought in not only a…

Measuring interdisciplinary research and education outcomes in the Vienna Doctoral Programme on Water Resource Systems

NASA Astrophysics Data System (ADS)

Carr, Gemma; Loucks, Daniel Pete; Blaschke, Alfred Paul; Bucher, Christian; Farnleitner, Andreas; Fürnkranz-Prskawetz, Alexia; Parajka, Juraj; Pfeifer, Norbert; Rechberger, Helmut; Wagner, Wolfgang; Zessner, Matthias; Blöschl, Günter

2015-04-01

The interdisciplinary postgraduate research and education programme - the Vienna Doctoral Programme on Water Resource Systems - was initiated in 2009. To date, 35 research students, three post-docs and ten faculty members have been engaged in the Programme, from ten research fields (aquatic microbiology, hydrology, hydro-climatology, hydro-geology, mathematical economics, photogrammetry, remote sensing, resource management, structural mechanics, and water quality). The Programme aims to develop research students with the capacity to work across the disciplines, to conduct cutting edge research and foster an international perspective. To do this, a variety of mechanisms are adopted that include research cluster groups, joint study sites, joint supervision, a basic study programme and a research semester abroad. The Programme offers a unique case study to explore if and how these mechanisms lead to research and education outcomes. Outcomes are grouped according to whether they are tangible (publications with co-authors from more than one research field, analysis of graduate profiles and career destinations) or non-tangible (interaction between researchers, networks and trust). A mixed methods approach that includes bibliometric analysis combined with interviews with students is applied. Bibliometric analysis shows that as the Programme has evolved the amount of multi-disciplinary work has increased (32% of the 203 full papers produced by the programme's researchers have authors from more than one research field). Network analysis to explore which research fields collaborate most frequently show that hydrology plays a significant role and has collaborated with seven of the ten research fields. Hydrology researchers seem to interact the most strongly with other research fields as they contribute understanding on water system processes. Network analysis to explore which individuals collaborate shows that much joint work takes place through the five research cluster groups (water resource management, land-surface processes, Hydrological Open Air Laboratory, water and health, modelling and risk). Student interviews highlight that trust between colleagues and supervisors, and the role of spaces for interaction (joint study sites, cluster group meetings, shared offices etc.) are important for joint work. Graduate analysis shows that students develop skills and confidence to work across disciplines through collaborating on their doctoral research. Working collaboratively during the doctorate appears to be strongly correlated with continuing to work in this way after graduation.

The Innovative Medicines Initiative's New Drugs for Bad Bugs programme: European public-private partnerships for the development of new strategies to tackle antibiotic resistance.

PubMed

Kostyanev, T; Bonten, M J M; O'Brien, S; Steel, H; Ross, S; François, B; Tacconelli, E; Winterhalter, M; Stavenger, R A; Karlén, A; Harbarth, S; Hackett, J; Jafri, H S; Vuong, C; MacGowan, A; Witschi, A; Angyalosi, G; Elborn, J S; deWinter, R; Goossens, H

2016-02-01

Antibiotic resistance (ABR) is a global public health threat. Despite the emergence of highly resistant organisms and the huge medical need for new drugs, the development of antibacterials has slowed to an unacceptable level worldwide. Numerous government and non-government agencies have called for public-private partnerships and innovative funding mechanisms to address this problem. To respond to this public health crisis, the Innovative Medicines Initiative Joint Undertaking programme has invested more than €660 million, with a goal of matched contributions from the European Commission and the European Federation of Pharmaceutical Industries and Associations, in the development of new antibacterial strategies. The New Drugs for Bad Bugs (ND4BB) programme, an Innovative Medicines Initiative, has the ultimate goal to boost the fight against ABR at every level from basic science and drug discovery, through clinical development to new business models and responsible use of antibiotics. Seven projects have been launched within the ND4BB programme to achieve this goal. Four of them will include clinical trials of new anti-infective compounds, as well as epidemiological studies on an unprecedented scale, which will increase our knowledge of ABR and specific pathogens, and improve the designs of the clinical trials with new investigational drugs. The need for rapid concerted action has driven the funding of seven topics, each of which should add significantly to progress in the fight against ABR. ND4BB unites expertise and provides a platform where the commitment and resources required by all parties are streamlined into a joint public-private partnership initiative of unprecedented scale. © The Author 2015. Published by Oxford University Press on behalf of the British Society for Antimicrobial Chemotherapy. All rights reserved. For Permissions, please e-mail: journals.permissions@oup.com.

Disruptive technology for vector control: the Innovative Vector Control Consortium and the US Military join forces to explore transformative insecticide application technology for mosquito control programmes.

PubMed

Knapp, Jennifer; Macdonald, Michael; Malone, David; Hamon, Nicholas; Richardson, Jason H

2015-09-26

Malaria vector control technology has remained largely static for decades and there is a pressing need for innovative control tools and methodology to radically improve the quality and efficiency of current vector control practices. This report summarizes a workshop jointly organized by the Innovative Vector Control Consortium (IVCC) and the Armed Forces Pest Management Board (AFPMB) focused on public health pesticide application technology. Three main topics were discussed: the limitations with current tools and techniques used for indoor residual spraying (IRS), technology innovation to improve efficacy of IRS programmes, and truly disruptive application technology beyond IRS. The group identified several opportunities to improve application technology to include: insuring all IRS programmes are using constant flow valves and erosion resistant tips; introducing compression sprayer improvements that help minimize pesticide waste and human error; and moving beyond IRS by embracing the potential for new larval source management techniques and next generation technology such as unmanned "smart" spray systems. The meeting served to lay the foundation for broader collaboration between the IVCC and AFPMB and partners in industry, the World Health Organization, the Bill and Melinda Gates Foundation and others.

A crossover trial evaluating an educational-behavioural joint protection programme for people with rheumatoid arthritis.

PubMed

Hammond, A; Lincoln, N; Sutcliffe, L

1999-05-01

Joint protection (JP) is a self-management technique widely taught to people with rheumatoid arthritis (RA). JP education aims to enable people with RA to reduce pain, inflammation, joint stress and reduce risks of deformity through using assistive devices and alternative movement patterns of affected joints to perform everyday activities. Previous studies evaluating JP education methods common in the UK have identified JP adherence is poor. A group education programme was developed using the Health Belief Model and Self-efficacy Theory. Strategies used to maximise JP adherence included goal-setting, contracting, modelling, homework programmes, motor learning theory, recall enhancing methods and mental practice. A crossover trial (n = 35) was conducted. Adherence with JP was measured using an objective observational test (the Joint Protection Behaviour Assessment). Significant improvements in use of JP were recorded at 12 and 24 weeks post-education (P < 0.01). No significant changes in measures of pain, functional disability, grip strength, self-efficacy or helplessness occurred post-education, although this may have been due to the small sample size recruited. In conclusion, JP adherence can be facilitated through the use of educational-behavioural strategies, suggesting this approach should be more widely adopted in clinical practice.

Thin Gauge Twin-Roll Casting, Process Capabilities and Product Quality

NASA Astrophysics Data System (ADS)

Daaland, O.; Espedal, A. B.; Nedreberg, M. L.; Alvestad, I.

Traditionally industrial twin roll casters have been operated at gauges 6-10 mm, depending on the type of caster and the final product requirements. Over the past few years it has become apparent that a significant increase in productivity can be achieved when the casting gauge is reduced. Hydro Aluminium embarked on an extensive research and development, thin gauge casting programme, in the beginning of the 1990's and this paper presents some results from a five year lasting project (joint programme between Hydro Aluminium a.s. and Lauener Engineering). Based on more than 400 casting trials the major benefits and limitations of casting at reduced gauge and increased speed are outlined. Important aspects related to process development and product quality are discussed including: productivity and limitations, surface defects, microstructural characteristics, cooling rates and dendrite structure, segregation behaviour and mechanical properties after thermo-mechanical processing. Results for casting of several alloys are given. Additionally, numerical modelling results of the strip casting process are included.

Improving Educational Objectives of the Industrial and Management Systems Engineering Programme at Kuwait University

ERIC Educational Resources Information Center

Aldowaisan, Tariq; Allahverdi, Ali

2016-01-01

This paper describes the process of developing programme educational objectives (PEOs) for the Industrial and Management Systems Engineering programme at Kuwait University, and the process of deployment of these PEOs. Input of the four constituents of the programme, faculty, students, alumni, and employers, is incorporated in the development and…

Private-public sector co-operation to improve pesticide safety standards in developing countries.

PubMed

Ellis, W W

1998-01-01

This paper draws on the author's experiences of the pilot phase of the Safe Use Project (SUP) in Thailand; this project is a part of a major GIFAP initiative carried out in some developing countries. The SUP's objectives were; i) to raise awareness and compliance in the safe handling and storage of pesticides within the industry, the medical profession and the end-users; ii) to reduce the incidence of pesticide poisoning; iii) to protect the environment; iiii) to help relevant government agencies with resources, expertise and training. To achieve those objectives, the SUP used local-language training resources, provided basic training, lobbied for changes in governmental policies and regulations, and acted as a focal point for pesticide safety-related information. The SUP targeted the whole distribution chain, from importer/formulator, through to the endusers. Also medical profession, teachers and school students were targeted. On the base of independent audit and surveys, a general improvement in awareness has been shown within targeted groups; a longer time frame is required to detect meaningful changes in farmer practice. The SUP key programmes have been: I) training of trainers, retailers and farmers; II) schools programme; III) medical training; IV) protective clothing; V) industry standards; VI) model farm. The main conclusions of the pilot phase were: i) pesticide safety needs to be addressed by all concerned agencies in a joint effort; ii) a rural development perspective must be adopted in improving pesticide safety; iii) integrated pest management training programmes must include precautionary advice for proper handling, use and disposal of pesticides, wherever these are necessary.

"Stay away from them until you're old enough to make a decision": tobacco company testimony about youth smoking initiation.

PubMed

Wakefield, Melanie; McLeod, Kim; Perry, Cheryl L

2006-12-01

To determine common themes used by US tobacco industry witnesses pertaining to youth smoking initiation during litigation in the United States. Qualitative thematic analysis of transcripts from 29 tobacco litigation cases dating from 1992 to 2002. Youth smoking is portrayed by the tobacco industry as a source of great concern to them. Youth smoking prevention programmes developed by US tobacco companies are supposedly intended to delay decision-making about smoking until age 18, when individuals are then seen to be of an age where they are able to "choose to smoke". Tobacco industry media campaigns, youth access, community and school-based programmes are predicated on peer influence, parental factors, and commercial access being the primary influences on youth smoking uptake, rather than tobacco marketing, inaccurate risk appraisal, price and other factors known to influence youth smoking. Despite substantial financial investment in tobacco industry programmes, their witnesses were able to describe only weak evaluation methods, being preoccupied with measures of message comprehension, programme reach and uptake, and the associated costs of their efforts, rather than any evaluation designed to assess effects on youth smoking behaviour. Stated concerns about youth smoking and youth smoking prevention programmes are put forward in litigation as evidence that the tobacco industry is "serious" about tackling youth smoking, and serve as a primary strategy to improve the tobacco industry's public image. The tobacco industry's evaluation of the effectiveness of their youth smoking prevention programmes is demonstrably insufficient under current public health evaluation standards. Public health and welfare agencies should avoid engagement with tobacco industry-sponsored programmes.

The German joint research project "concepts for future gravity satellite missions"

NASA Astrophysics Data System (ADS)

Reubelt, Tilo; Sneeuw, Nico; Fichter, Walter; Müller, Jürgen

2010-05-01

Within the German joint research project "concepts for future gravity satellite missions", funded by the Geotechnologies programme of the German Federal Ministry of Education and Research, options and concepts for future satellite missions for precise (time-variable) gravity field recovery are investigated. The project team is composed of members from science and industry, bringing together experts in geodesy, satellite systems, metrology, sensor technology and control systems. The majority of team members already contributed to former gravity missions. The composition of the team guarantees that not only geodetic aspects and objectives are investigated, but also technological and financial constraints are considered. Conversely, satellite, sensor and system concepts are developed and improved in a direct exchange with geodetic and scientific claims. The project aims to develop concepts for both near and mid-term future satellite missions, taking into account e.g. advanced satellite formations and constellations, improved orbit design, innovative metrology and sensor systems and advances in satellite systems.

Continuous Improvement in the Industrial and Management Systems Engineering Programme at Kuwait University

ERIC Educational Resources Information Center

Aldowaisan, Tariq; Allahverdi, Ali

2016-01-01

This paper describes the process employed by the Industrial and Management Systems Engineering programme at Kuwait University to continuously improve the programme. Using a continuous improvement framework, the paper demonstrates how various qualitative and quantitative analyses methods, such as hypothesis testing and control charts, have been…

List of Organizing Committees and Conference Programme

NASA Astrophysics Data System (ADS)

2012-03-01

Organizers Frank Laboratory of Neutron Physics, Joint Institute for Nuclear Research Horia Hulubei National Institute of Physics and Nuclear Engineering - IFIN HH Romanian Neutron Scattering Society Sponsors Frank Laboratory of Neutron Physics, Joint Institute for Nuclear Research Horia Hulubei National Institute of Physics and Nuclear Engineering - IFIN HH Comenius University in Bratislava, Slovakia Institute of Macromolecular Chemistry AS CR, Czech Republic Programme Committee Valentin Gordely (chairman)Joint Institute for Nuclear Research, Russia Heinrich StuhrmannGermany Jose TeixeiraLaboratoire Leon Brillouin, France Pavel ApelJoint Institute for Nuclear Research, Russia Pavol BalgavyComenius University in Bratislava, Slovakia Alexander BelushkinJoint Institute for Nuclear Research, Russia Georg BueldtInstitute of Structural Biology and Biophysics (ISB), Germany Leonid BulavinTaras Shevchenko National University of Kyiv, Ukraine Emil BurzoBabes-Bolyai University, Romania Vadim CherezovThe Scripps Research Institute, Department of Molecular Biology, USA Ion IonitaRomanian Society of Neutron Scattering, Romania Alexei KhokhlovMoscow State University, Russia Aziz MuzafarovInstitute of Synthetic Polymeric Materials, Russian Academy of Sciences, Russia Alexander OzerinInstitute of Synthetic Polymeric Materials, Russian Academy of Sciences, Russia Gerard PepyResearch Institute for Solid State Physics and Optics, Hungary Josef PlestilInstitute of Macromolecular Chemistry CAS, Czech Republic Aurel RadulescuJuelich Centre for Neutron Science JCNS, Germany Maria BalasoiuJoint Institute for Nuclear Research, Russia Alexander KuklinJoint Institute for Nuclear Research, Russia Local Organizing Committee Alexander Kuklin - Chairman Maria Balasoiu - Co-chairman Tatiana Murugova - Secretary Natalia Malysheva Natalia Dokalenko Julia Gorshkova Andrey Rogachev Oleksandr Ivankov Dmitry Soloviev Lilia Anghel Erhan Raul The PDF also contains the Conference Programme.

78 FR 66788 - Joint Industry Plan; Order Approving Amendment No. 30 to the Joint Self-Regulatory Organization...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-11-06

... SECURITIES AND EXCHANGE COMMISSION [Release No. 34-70793; File No. S7-24-89] Joint Industry Plan..., Consolidation and Dissemination of Quotation and Transaction Information for Nasdaq-Listed Securities Traded on... Exchange, Inc., Financial Industry Regulatory Authority, Inc., International Securities Exchange LLC...

Training Engineers of Joint Programs for the European Aerospace Industry.

ERIC Educational Resources Information Center

Thomas, Jurgen

1985-01-01

Examines topics and issues related to training engineers of joint programs for the European aerospace industry. Forms of cooperation, European educational systems, and skills needed to successfully work as an engineer in a joint program for the European aircraft industry are the major areas addressed. (JN)

A new joint training programme in infectious diseases and medical microbiology.

PubMed

Cohen, J; Roberts, C

2000-01-01

The increasing overlap between the disciplines of medical microbiology and infectious diseases prompted the Joint Royal Colleges Committee on Infection and Tropical Medicine to set up a working party to examine how trainees could obtain certification in both subjects. Following widespread consultations, a scheme was developed that entails six years of training and leads to the award of CCSTs in both microbiology and infectious diseases. Both Royal Colleges and the Specialist Training Authority have approved the scheme. Joint training will be demanding and will not be suitable for everyone; it represents an alternative approach to training in the infection disciplines that will run alongside the existing monospecialty training programmes.

Publications - GMC 369 | Alaska Division of Geological & Geophysical

Science.gov Websites

DGGS GMC 369 Publication Details Title: Pyramid Project: Aleut-Quintana-Duval Joint Venture Report on Project: Aleut-Quintana-Duval Joint Venture Report on 1975 Drill Programme: Alaska Division of Geological

"Me Amo Leer" Reading Experiences in a Central Illinois Summer Migrant Education Programme

ERIC Educational Resources Information Center

Pavri, Shireen; Bentz, Johnell; Bradley, Janetta Fleming; Corso, Laurie

2005-01-01

This paper describes the assessment and instructional strategies used in a migrant education programme that had positive academic outcomes for a group of 11 eight-to-12-year-old Spanish/English-speaking students of Mexican descent. Students attended this four-week summer programme, jointly sponsored by the University of Illinois and the local…

The United Nations Human Space Technology Initiative

NASA Astrophysics Data System (ADS)

Balogh, Werner; Miyoshi, Takanori

2016-07-01

The United Nations Office for Outer Space Affairs (OOSA) launched the Human Space Technology Initiative (HSTI) in 2010 within the United Nations Programme on Space Applications, based on relevant recommendations of the Third United Nations Conference on the Exploration and Peaceful Uses of Outer Space (UNISPACE III). The activities of HSTI are characterized by the following "Three Pillars": International Cooperation, Outreach, and Capacity-building. For International Cooperation, OOSA and the Japan Aerospace Exploration Agency (JAXA) jointly launched a new programme entitled "KiboCUBE". KiboCUBE aims to provide educational or research institutions located in developing countries with opportunities to deploy cube satellites of their own design and manufacture from Japanese Experiment Module "Kibo" on-board the International Space Station (ISS). The Announcement of Opportunity was released on 8 September 2015 and the selected institution is to be announced by 1 August 2016. OOSA is also collaborating with WHO and with the COPUOS Expert Group on Space and Global Health to promote space technologies and ground- and space-based research activities that can contribute to improving global health. For Outreach, OOSA and the government of Costa Rica are jointly organising the United Nations/Costa Rica Workshop on Human Space Technology from 7 to 11 March 2016. Participants will exchange information on achievements in human space programmes and discuss how to promote international cooperation by further facilitating the participation of developing countries in human space exploration-related activities. Also, it will address the role of space industries in human space exploration and its related activities, considering that they have become significant stakeholders in this field. For Capacity-building, OOSA has been carrying out two activities: the Zero-Gravity Instrument Project (ZGIP) and the Drop Tower Experiment Series (DropTES). In ZGIP, OOSA has annually distributed clinostats (microgravity simulation instruments) worldwide. ZGIP has been providing students and teachers with the opportunity to study gravitational effects on samples such as plant seeds in a simulated microgravity condition. Currently, second and third cycles are on-going. DropTES is a fellowship programme, in which OOSA and the Centre of Applied Space Technology and Microgravity (ZARM) jointly provide one student team annually with the opportunity to conduct their own microgravity experiment at the Bremen Drop Tower, Germany. In 2015, in the DropTES second cycle, Universidad Católica Boliviana "San Pablo" was given the fellowship. DropTES has been extended to the third cycle for 2016.

Relationship between microstructure and mechanical properties of Alloy 690 tubes for steam generators

NASA Astrophysics Data System (ADS)

Diano, P.; Muggeo, A.; Van Duysen, J. C.; Guttmann, M.

1989-12-01

Alloy 690 is used to replace Alloy 600 for the fabrication of tubes for steam generators of french pressurized water nuclear reactors. In order to reduce the dispersion in tensile properties observed for the first Alloy 690 industrial tubes, and which had already been noticed for Alloy 600, a joint research programme has been carried out by Electricité de France (Département Etude des Matériaux) and Valinox Montbard. The dispersion in the tensile properties of the first industrial Alloy 690 tubes for PWR steam generators arises from two main factors: - a grain size dispersion which is in particular controlled by the carbon content and by the final heat treatment, - differences in the degree of strain hardening induced by the straightening process with rollers. An improvement of the fabrication processes which have an influence on these two factors has allowed to reduce considerably the dispersion of the tensile properties of the more recent series of tubes.

MetroFission: New high-temperature references and sensors for the nuclear industry

NASA Astrophysics Data System (ADS)

Sadli, M.; del Campo, D.; de Podesta, M.; Deuzé, T.; Failleau, G.; Elliott, C. J.; Fourrez, S.; García, C.; Pearce, J. V.

2013-09-01

The European metrology research programme (EMRP) allows funding for metrology-oriented projects in the frame of targeted calls aimed at improving metrology for important contemporary and future needs in different fields such as energy, environment and industry. A joint research project (JRP), called "MetroFission", was selected for funding in the "Energy" call of 2010. This JRP, led by NPL (UK), aims to anticipate and to start addressing the metrological needs of the next generation of nuclear power plants. The need for improving the accuracy and reliability of temperature measurements at temperatures higher than those currently measured in nuclear power plants is dealt with in the first workpackage of the project. This project started in September 2010 and will last for three years. This paper summarizes the activities of the first half of the project and the expected final achievements, which will be essentially oriented towards new temperature references and new devices, adapted to the high temperature range as well as the particularly harsh working conditions.

Airborne and Maritime/Fixed Station Joint Tactical Radio System (AMF JTRS)

DTIC Science & Technology

2015-12-01

Selected Acquisition Report (SAR) RCS: DD-A&T(Q&A)823-421 Airborne & Maritime/Fixed Station Joint Tactical Radio System (AMF JTRS) As of FY 2017...Information Program Name Airborne & Maritime/Fixed Station Joint Tactical Radio System (AMF JTRS) DoD Component Army Responsible Office References SAR...UNCLASSIFIED 5 Mission and Description Airborne & Maritime/Fixed Station Joint Tactical Radio System (AMF JTRS) products are software programmable

"Care and feeding": the Asian environmental tobacco smoke consultants programme.

PubMed

Assunta, M; Fields, N; Knight, J; Chapman, S

2004-12-01

To review the tobacco industry's Asian environmental tobacco smoke (ETS) consultants programme, focusing on three key nations: China, Hong Kong, and Malaysia. Systematic keyword and opportunistic website searches of formerly private internal industry documents. The release of the 1986 US Surgeon General's report on second hand smoke provoked tobacco companies to prepare for a major threat to their industry. Asian programme activities included conducting national/international symposiums, consultant "road shows" and extensive lobbying and media activities. The industry exploited confounding factors said to be unique to Asian societies such as diet, culture and urban pollution to downplay the health risks of ETS. The industry consultants were said to be "..prepared to do the kinds of things they were recruited to do". The programme was successful in blurring the science on ETS and keeping the controversy alive both nationally and internationally. For the duration of the project, it also successfully dissuaded national policy makers from instituting comprehensive bans on smoking in public places.

"Care and feeding": the Asian environmental tobacco smoke consultants programme

PubMed Central

Assunta, M; Fields, N; Knight, J; Chapman, S

2004-01-01

Study objective: To review the tobacco industry's Asian environmental tobacco smoke (ETS) consultants programme, focusing on three key nations: China, Hong Kong, and Malaysia. Methods: Systematic keyword and opportunistic website searches of formerly private internal industry documents. Main results: The release of the 1986 US Surgeon General's report on second hand smoke provoked tobacco companies to prepare for a major threat to their industry. Asian programme activities included conducting national/international symposiums, consultant "road shows" and extensive lobbying and media activities. The industry exploited confounding factors said to be unique to Asian societies such as diet, culture and urban pollution to downplay the health risks of ETS. The industry consultants were said to be "...prepared to do the kinds of things they were recruited to do". Conclusions: The programme was successful in blurring the science on ETS and keeping the controversy alive both nationally and internationally. For the duration of the project, it also successfully dissuaded national policy makers from instituting comprehensive bans on smoking in public places. PMID:15564219

Corporate initiatives in ergonomics--an introduction.

PubMed

Hägg, Göran M

2003-01-01

Examples in the literature of corporate initiatives in ergonomics are reviewed. Different types of programmes are identified with ambitions ranging from time-limited interventions to continuous processes. Common elements are health surveillance, workstation design and choice of tools, product design, quality aspects, participative aspects and education, training and information. The implementation of ergonomics programmes varies substantially depending on the type of company, and company policies and organisation. Some of the most developed ergonomics programmes originate from the automobile industry. Other businesses with many established programmes are the electronics industry, the food industry and the office environment. A participative approach, as well as ergonomics expertise, are crucial ingredients for a successful programme. The scientific evaluation of ergonomics programmes, especially in economical terms, is in too many cases insufficient or missing. Furthermore, links to company core values such as quality improvement are often lacking. Programmes in ergonomics are still often seen as solely a matter of health and safety. Only a few companies have reached the state where ergonomics constitutes an integrated part of the overall strategy of the enterprise.

Dragon 2 Programme Achievements and Cooperation

NASA Astrophysics Data System (ADS)

Desnos, Yves-Louis; Li, Zengyuan; Zmuda, Andy; Gao, Zhihai

2013-01-01

The cooperation between ESA and National Remote Sensing Center of China (NRSCC) / Ministry of Science and Technology of China (MOST) in the development of Earth Observation (EO) applications started 17 years ago. In 2004, a new phase in cooperation began with the start of the Dragon Programme which focused on science and application using ESA ERS and Envisat satellite data. The programme was completed in 2008. Following on, the cooperation took on greater momentum with the start of a four-year EO science and exploitation programme called “Dragon 2”. The programme formally closed in June at the 2012 Beijing Symposium. The programme brought together joint Sino-European teams to investigate land, ocean and atmospheric applications in P.R. China using EO data from ESA, Third Party Mission (TPM) and Chinese satellites. The teams were led by principal EO scientists. Young European and Chinese scientists were also engaged on the projects. Advanced training courses in land, ocean and atmospheric applications were held in each year of the programme in China. Altogether, two courses on land, one course on atmospheric applications and one course on oceanographic applications were held. Here-in provided is an overview of the achievements, cooperation, reporting and training activities at the completion of the programme. The Sino-European teams have delivered world-class scientific results across a wide range of disciplines. The programme provided a platform for the joint exploitation of ESA, TPM and Chinese EO data from optical, thermal and microwave sensors for geo-science application and development in China.

Toward Automating Web Protocol Configuration for a Programmable Logic Controller Emulator

DTIC Science & Technology

2014-06-19

Security Risks for Industrial Control Systems ,” VDE 2004 Congress, Berlin, Germany, October 2004, pp. 1-7. [Cis12] Cisco, NetFlow Configuration Guide...Date 29 May 2014 Date AFIT-ENG-T-14-J-4 Abstract Industrial Control Systems (ICS) remain vulnerable through attack vectors that exist within programmable...5 2.2 Industrial Control Systems

Dietary sodium reduction in New Zealand: influence of the Tick label.

PubMed

Ning, Sherry X; Mainvil, Louise A; Thomson, Rachel K; McLean, Rachel M

2017-01-01

The Tick programme of the National Heart Foundation (NHF) is the longest standing voluntary front of pack signpost nutrition logo in New Zealand. It provides a platform for collaboration with the food industry to encourage development of healthier products. This study evaluated the impact of the Tick programme on sodium in processed food. Fifty-two Tick programme products from food categories known to contribute substantially to sodium intake were identified. Sales volumes (kg) from January 2011 to December 2013 were multiplied by changes in sodium content over that time, producing an estimate of programme impact. Five semi-structured interviews with industry representatives were conducted, to look at other influences for sodium reduction, and themes identified through methods of thematic analysis. Over the period, the Tick programme influenced food companies to remove approximately 16 tonnes of salt through the reformulation and formulation of 52 Tick-approved breakfast cereals, edible oil spreads, cooking sauces and processed poultry products. Other factors influencing sodium reduction reported by company representatives included increased consumer and industry interest in healthier product nutrition profiles and other sodium reduction programmes targeting reformulation/formulation. The Tick remains a credible and well-recognized brand and may provide a competitive edge for participating food manufacturers in the current market. The Tick programme is effective in influencing industry to reduce sodium in processed foods in New Zealand. The combined impact of the Tick and other NHF programmes has the potential to reduce population sodium intake and improve health outcomes.

L'espace articulaire de la Robotique Industrielle est un espace vectorielIndustrial Robotics joint space is a vector space

NASA Astrophysics Data System (ADS)

Tondu, Bertrand

2003-05-01

The mathematical modelling of industrial robots is based on the vectorial nature of the n-dimensional joint space of the robot, defined as a kinematic chain with n degrees of freedom. However, in our opinion, the vectorial nature of the joint space has been insufficiently discussed in the literature. We establish the vectorial nature of the joint space of an industrial robot from the fundamental studies of B. Roth on screws. To cite this article: B. Tondu, C. R. Mecanique 331 (2003).

Industrial platforms--a unique feature of the European Commission's biotechnology R&D programme.

PubMed

Aguilar, A; Ingemansson, T; Hogan, S; Magnien, E

1998-09-01

The European Commission's research, technological development and demonstration programmes aim to strengthen European research and technological development, and to increase the competitiveness of European industries. The creation and development of Industrial Platforms play an important role in these processes by improving the transition from research to commercial application. Industrial Platforms are technology-based industrial groupings established by industry with the aims of enabling the exploitation or dissemination of research results, encouraging academic-industrial collaborations and providing their members with a means of voicing their opinion on present and future research policies.

Industry sponsored youth smoking prevention programme in Malaysia: a case study in duplicity.

PubMed

Assunta, M; Chapman, S

2004-12-01

To review tobacco company strategies of using youth smoking prevention programmes to counteract the Malaysian government's tobacco control legislation and efforts in conducting research on youth to market to them. Systematic keyword and opportunistic website searches of formerly private internal industry documents. Search terms included Malay, cmtm, jaycees, YAS, and direct marketing; 195 relevant documents were identified for this paper. Industry internal documents reveal that youth anti-smoking programmes were launched to offset the government's tobacco control legislation. The programme was seen as a strategy to lobby key politicians and bureaucrats for support in preventing the passage of legislation. However, the industry continued to conduct research on youth, targeted them in marketing, and considered the teenage market vital for its survival. Promotional activities targeting youth were also carried out such as sports, notably football and motor racing, and entertainment events and cash prizes. Small, affordable packs of cigarettes were crucial to reach new smokers. The tobacco industry in Malaysia engaged in duplicitous conduct in regard to youth. By buying into the youth smoking issue it sought to move higher on the moral playing field and strengthen its relationship with government, while at the same time continuing to market to youth. There is no evidence that industry youth smoking prevention programmes were effective in reducing smoking; however, they were effective in diluting the government's tobacco control legislation.

Industry sponsored youth smoking prevention programme in Malaysia: a case study in duplicity

PubMed Central

Assunta, M; Chapman, S

2004-01-01

Objective: To review tobacco company strategies of using youth smoking prevention programmes to counteract the Malaysian government's tobacco control legislation and efforts in conducting research on youth to market to them. Methods: Systematic keyword and opportunistic website searches of formerly private internal industry documents. Search terms included Malay, cmtm, jaycees, YAS, and direct marketing; 195 relevant documents were identified for this paper. Results: Industry internal documents reveal that youth anti-smoking programmes were launched to offset the government's tobacco control legislation. The programme was seen as a strategy to lobby key politicians and bureaucrats for support in preventing the passage of legislation. However, the industry continued to conduct research on youth, targeted them in marketing, and considered the teenage market vital for its survival. Promotional activities targeting youth were also carried out such as sports, notably football and motor racing, and entertainment events and cash prizes. Small, affordable packs of cigarettes were crucial to reach new smokers. Conclusion: The tobacco industry in Malaysia engaged in duplicitous conduct in regard to youth. By buying into the youth smoking issue it sought to move higher on the moral playing field and strengthen its relationship with government, while at the same time continuing to market to youth. There is no evidence that industry youth smoking prevention programmes were effective in reducing smoking; however, they were effective in diluting the government's tobacco control legislation. PMID:15564218

Competent statistical programmer: Need of business process outsourcing industry

PubMed Central

Khan, Imran

2014-01-01

Over the last two decades Business Process Outsourcing (BPO) has evolved as much mature practice. India is looked as preferred destination for pharmaceutical outsourcing over a cost arbitrage. Among the biometrics outsourcing, statistical programming and analysis required very niche skill for service delivery. The demand and supply ratios are imbalance due to high churn out rate and less supply of competent programmer. Industry is moving from task delivery to ownership and accountability. The paradigm shift from an outsourcing to consulting is triggering the need for competent statistical programmer. Programmers should be trained in technical, analytical, problem solving, decision making and soft skill as the expectations from the customer are changing from task delivery to accountability of the project. This paper will highlight the common issue SAS programming service industry is facing and skills the programmers need to develop to cope up with these changes. PMID:24987578

Competent statistical programmer: Need of business process outsourcing industry.

PubMed

Khan, Imran

2014-07-01

Over the last two decades Business Process Outsourcing (BPO) has evolved as much mature practice. India is looked as preferred destination for pharmaceutical outsourcing over a cost arbitrage. Among the biometrics outsourcing, statistical programming and analysis required very niche skill for service delivery. The demand and supply ratios are imbalance due to high churn out rate and less supply of competent programmer. Industry is moving from task delivery to ownership and accountability. The paradigm shift from an outsourcing to consulting is triggering the need for competent statistical programmer. Programmers should be trained in technical, analytical, problem solving, decision making and soft skill as the expectations from the customer are changing from task delivery to accountability of the project. This paper will highlight the common issue SAS programming service industry is facing and skills the programmers need to develop to cope up with these changes.

Farmers Functional Literacy Programme.

ERIC Educational Resources Information Center

Ministry of Education and Social Welfare, New Delhi (India).

The Farmers Training and Functional Literacy Programme, initiated by the government of India in 1968, was an effort to translate into practice the concept of linking education (not only vocational training) to development, particularly for increasing production. The project, a joint enterprise of three government ministries, provides participating…

76 FR 5224 - Joint Industry Plan; Notice of Filing of Amendment No. 25 to the Joint Self-Regulatory...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-01-28

... Collection, Consolidation and Dissemination of Quotation and Transaction Information for Nasdaq-Listed... Exchange, Inc., EDGX Exchange, Inc., Financial Industry Regulatory Authority, Inc., International... Joint Self-Regulatory Organization Plan Governing the Collection, Consolidation, and Dissemination of...

News and Views: Space technology in the oil industry; OU to play role in next stage of Mars exploration; Viking revisited; Wish you were here? GOCE gets going again

NASA Astrophysics Data System (ADS)

2010-10-01

The troubles flowing from BP's Macondo oil well in Gulf of Mexico have focused attention on the technological demands of safe deep-water drilling. European Space Agency research presented in a Space and Energy Seminar in August offers spin-off technologies that could support oil exploration and production in extreme environments, from corrosion control to better robotics. NASA and the European Space Agency have embarked on a joint programme to study the chemical composition of the atmosphere of Mars from 2016. They have just announced the providers of five scientific instruments for the first mission, including two consortia in which the Open University has a major role.

Lessons learnt on implementing an interdisciplinary doctoral programme in water sciences

NASA Astrophysics Data System (ADS)

Carr, Gemma; Loucks, Daniel Pete; Blaschke, Alfred Paul; Bucher, Christian; Farnleitner, Andreas; Fürnkranz-Prskawetz, Alexia; Parajka, Juraj; Pfeifer, Norbert; Rechberger, Helmut; Wagner, Wolfgang; Zessner, Matthias; Blöschl, Günter

2015-04-01

Using the Vienna Doctoral Programme on Water Resource Systems as a case study, this work describes how the characteristics of the programme can be evaluated to identify which process features are important for developing interdisciplinary research at the doctoral level. The Programme has been running since 2009, and to date has engaged 35 research students, three post-docs and ten faculty members from ten research fields (aquatic microbiology, hydrology, hydro-climatology, hydro-geology, mathematical economics, photogrammetry, remote sensing, resource management, structural mechanics, and water quality). Collaborative, multi-disciplinary research is encouraged and supported through various mechanisms - shared offices, study programme, research cluster groups that hold regular meetings, joint study sites, annual and six-month symposia that bring all members of the programme together, seminar series, joint supervision, and social events. Interviews were conducted with 12 students and recent graduates to explore individual experiences of doing interdisciplinary research within the Programme, and to identify which mechanisms are perceived to be of the greatest benefit for collaborative work. Analysis revealed four important process features. Firstly, students noted that joint supervision and supervisors who are motivated to collaborate are essential for multi-disciplinary collaborative work. Secondly, interviewees described that they work with the people they sit close to or see most regularly. Physical places for collaboration between different discipline researchers such as shared offices and shared study sites are therefore important. Thirdly, the costs and benefits to doing interdisciplinary work were highlighted. Students make a trade-off when deciding if their time investment to develop their understanding of a new research field will support them in addressing their research question. The personal characteristics of the researcher seem to be particularly relevant to this decision making process and need to be considered during student selection. Finally, communication skills are critical. Students noted that they need to be able to understand what each other are doing in order to work together and the symposia and research cluster meetings are good places for developing these skills.

The effects of a strength and neuromuscular exercise programme for the lower extremity on knee load, pain and function in obese children and adolescents: study protocol for a randomised controlled trial.

PubMed

Horsak, Brian; Artner, David; Baca, Arnold; Pobatschnig, Barbara; Greber-Platzer, Susanne; Nehrer, Stefan; Wondrasch, Barbara

2015-12-23

Childhood obesity is one of the most critical and accelerating health challenges throughout the world. It is a major risk factor for developing varus/valgus misalignments of the knee joint. The combination of misalignment at the knee and excess body mass may result in increased joint stresses and damage to articular cartilage. A training programme, which aims at developing a more neutral alignment of the trunk and lower limbs during movement tasks may be able to reduce knee loading during locomotion. Despite the large number of guidelines for muscle strength training and neuromuscular exercises that exist, most are not specifically designed to target the obese children and adolescent demographic. Therefore, the aim of this study is to evaluate a training programme which combines strength and neuromuscular exercises specifically designed to the needs and limitations of obese children and adolescents and analyse the effects of the training programme from a biomechanical and clinical point of view. A single assessor-blinded, pre-test and post-test randomised controlled trial, with one control and one intervention group will be conducted with 48 boys and girls aged between 10 and 18 years. Intervention group participants will receive a 12-week neuromuscular and quadriceps/hip strength training programme. Three-dimensional (3D) gait analyses during level walking and stair climbing will be performed at baseline and follow-up sessions. The primary outcome parameters for this study will be the overall peak external frontal knee moment and impulse during walking. Secondary outcomes include the subscales of the Knee injury and Osteoarthritis Outcome Score (KOOS), frontal and sagittal kinematics and kinetics for the lower extremities during walking and stair climbing, ratings of change in knee-related well-being, pain and function and adherence to the training programme. In addition, the training programme will be evaulated from a clinical and health status perspective by including the following analyses: cardiopulmonary testing to quantify aerobic fitness effects, anthropometric measures, nutritional status and psychological status to characterise the study sample. The findings will help to determine whether a neuromuscular and strength training exercise programme for the obese children population can reduce joint loading during locomotion, and thereby decrease the possible risk of developing degenerative joint diseases later in adulthood. ClinicalTrials NCT02545764 , Date of registration: 24 September 2015.

Progress and Achievements At the Mid Term Stage of the Dragon 2 Programme

NASA Astrophysics Data System (ADS)

Desnos, Yves-Louis; Li, Zhengyuan; Zmuda, Andy; Gao, Zhihai

2010-10-01

The cooperation between ESA and National Remote Sensing Center of China (NRSCC) / Ministry Of Science and Technology of China (MOST) in the development of Earth Observation (EO) applications started 15 years ago. In 2004, a new phase in cooperation began with the start of the Dragon Programme which focused on science and application using ESA satellite data. The programme was completed in 2008. Following on, the cooperation took on greater momentum with the start of a four-year EO science and exploitation programme called 'Dragon 2'. This programme brings together joint Sino-European teams to investigate land, ocean and atmospheric applications in P.R. China using data from ESA, Third Party Mission and Chinese Earth Observation satellites. The teams are led by leading EO scientists and young scientists are also engaged on the projects. Advanced training in land, ocean and atmospheric applications is a feature of the programme and after 2 years, two courses on land and one course on atmospheric applications have been successfully held in 2008, 2009 and 2010 in China. Here-in provided is an overview of the results, reporting and training activities at the mid term stage of the programme. The Sino-European teams continue to deliver world-class scientific results across a wide range of disciplines. The programme provides a platform for the joint exploitation of ESA, TPM and Chinese EO data from optical, infrared, thermal and microwave sensors for science and application development.

Effectiveness of a balance training home exercise programme for adults with haemophilia: a pilot study.

PubMed

Hill, K; Fearn, M; Williams, S; Mudge, L; Walsh, C; McCarthy, P; Walsh, M; Street, A

2010-01-01

Adults with haemophilia and other bleeding disorders often develop lower limb musculoskeletal problems associated with bleeds into joints and muscles, which may affect balance performance and increase likelihood of falling. The aim of this study was to evaluate the effectiveness of an individualized balance and strength home exercise programme on improving balance and related outcomes for adults with haemophilia and other bleeding disorders. Twenty male adults with haemophilia and other bleeding disorders (mean age 39.4 years, 95% CI = 33.7-45.1) were recruited to participate. They underwent a comprehensive clinical and force platform assessment of balance and related measures. Based on assessment findings, the assessing physiotherapist provided an individualized home exercise programme of balance, strengthening and walking exercises. Re-assessment occurred after the 4-month exercise programme. Twelve participants (60%) completed the programme and were re-assessed. There were no safety problems or dropouts associated with the exercise programme aggravating joint status. Although there were no statistically significant changes in any of the measures (adjusted for multiple comparisons), there were improvements of between 5% and 22% on 10 of the 16 measures, with the Neurocom modified Clinical Test of Sensory Interaction on Balance (P = 0.036) and Timed Sit to Stand (P = 0.064) approaching significance. A tailored home exercise programme targeting balance, strengthening and walking is feasible for adults with haemophilia and other bleeding disorders. These results suggest that positive physical outcomes including improved balance and mobility may be achieved with this type of programme.

Progress and Achievements at the Mid Term of the Dragon 3 Programme

NASA Astrophysics Data System (ADS)

Desnos, Yves-Louis; Li, Zengyuan; Zmuda, Andy; Gao, Zhihai

2014-11-01

The Dragon Programme is a joint undertaking between ESA and the Ministry of Science and Technology (MOST) of China and the National Remote Sensing Center of China (NRSCC). Its purpose is to encourage increased exploitation of ESA and Chinese space resources within China as well as stimulate increased scientific cooperation in the field of Earth Observation (EO) science and applications between China and Europe. Since 2004, this pioneering programme has become a model for scientific and technological cooperation between China and Europe. By successfully encouraging joint research using ESA, Third Party Missions and Chinese EO data across a range of thematic areas, Dragon continues to deliver outstanding scientific results. The programme has successfully completed two phases, Dragon 1 from 2004 to 2008, Dragon 2 from 2008 to 2012. The third phase of Dragon was started in 2012 and will be completed in 2016. The Dragon 3 project teams are led by leading EO scientists and young scientists are also engaged on the projects. Advanced training in land, ocean and atmospheric applications is a feature of the programme and a course on land and one course on ocean applications have been successfully held in 2012 and 2013 in China. Here-in provided is an overview of the results, reporting and training activities at the mid-term stage of the programme.

ERA-MIN: The European network (ERA-NET) on non-energy raw materials

NASA Astrophysics Data System (ADS)

vidal, o.; christmann, p.; Bol, d.; Goffé, b.; Groth, m.; Kohler, e.; Persson Nelson, k.; Schumacher, k.

2012-04-01

Non-energy raw materials are vital for the EU's economy, and for the development of environmentally friendly technologies. The EU is the world's largest consumers of non-energy minerals, but it remains dependent on the importation of many metals, as its domestic production is limited to about 3% of world production. We will present the project ERA-MIN, which is an ERA-NET on the Industrial Handling of Raw Materials for European industries, financially supported by the European Commission. The main objectives of ERA-MIN are: 1) Mapping and Networking: interconnecting the members of the currently fragmented European mineral resources research area, to the aim of fostering convergence of public research programs, industry, research institutes, academia and the European Commission, 2) Coordinating: establishing a permanent mechanism for planning and coordination of the European non-energy mineral raw materials research community (ENERC). 3) Roadmapping: defining the most important scientific and technological challenges that should be supported by the EU and its state members, 4) Programming: designing a Joint European Research Programme model and implementating it into a call for proposals open to academic and industrial research. The topics of interest in ERA-MIN are the primary continental and marine resources, the secondary resources and their related technologies, substitution and material efficiency, along with transversal topics such as environmental impact, public policy support, mineral intelligence, and public education and teaching. Public scientific research is very central in the scope of the ERA-MIN activity, whose consortium is indeed lead by a public organisation of fundamental research. Thus, universities and public research organisations are warmly invited to play an active role in defining the scientific questions and challenges that shall determine the European Raw Materials Roadmap and should be addressed by joint programming at the European scale. The various levels of possible involvement in ERA-MIN for the interested stakeholders will be presented.

SWOT analysis to evaluate the programme of a joint online/onsite master's degree in environmental education through the students' perceptions.

PubMed

Romero-Gutierrez, Miguel; Jimenez-Liso, M Rut; Martinez-Chico, Maria

2016-02-01

This study shows the use of SWOT to analyse students' perceptions of an environmental education joint master's programme in order to determine if it runs as originally planned. The open answers given by students highlight the inter-university nature of the master's, the technological innovation used as major points, and the weaknesses in the management coordination or the duplicate contents as minor points. The external analysis is closely linked with the students' future jobs, their labour opportunities available to them after graduation. The innovative treatment of the data is exportable to the evaluation of programmes of other degrees because it allows the description linked to its characteristics and its design through the students' point of view. Copyright © 2015 Elsevier Ltd. All rights reserved.

The use of a modified pairwise comparison method in evaluating critical success factors for community-based rural homestay programmes

NASA Astrophysics Data System (ADS)

Daud, Shahidah Md; Ramli, Razamin; Kasim, Maznah Mat; Kayat, Kalsom; Razak, Rafidah Abd

2014-12-01

Tourism industry has become the highlighted sector which has amazingly increased the national income level. Despite the tourism industry being one of the highest income generating sectors, Homestay Programme as a Community-Based Tourism (CBT) product in Malaysia does not absorbed much of the incoming wealth. Homestay Programme refers to a programme in a community where a tourist stays together with a host family and experiences the everyday way of life of the family in both direct and indirect manner. There are over 100 Homestay Programme currently being registered with the Ministry of Culture and Tourism Malaysia which mostly are located in rural areas, but only a few excel and enjoying the fruit of the booming industry. Hence, this article seeks to identify the critical success factors for a Community-Based Rural Homestay Programme in Malaysia. A modified pairwise method is utilized to further evaluate the identified success factors in a more meaningful way. The findings will help Homestay Programme function as a community development tool that manages tourism resources. Thus, help the community in improving local economy and creating job opportunities.

Clinical SAS programming in India: A study of industry needs versus wants.

PubMed

Ananthakrishnan, Nithiyanandhan

2014-07-01

The clinical SAS (www.sas.com) programming industry, in India, has seen a rapid growth in the last decade and the trend seems set to continue, for the next couple of years, due to cost advantage and the availability of skilled labor. On one side the industry needs are focused on less execution time, high margins, segmented tasks and the delivery of high quality output with minimal oversight. On the other side, due to the increased demand for skilled resources, the wants of the programmers have taken a different shift toward diversifying exposure, unsustainable wage inflation due to multiple opportunities and generally high expectations around career progression. If the industry needs are not going to match with programmers want, or vice versa, then there is the possibility that the current year on year growth may start to slow or even go into decline. This paper is intended to identify the gap between wants and need and puts forwards some suggestions, for both sides, in ways to change the equation to benefit all. Questionnaire on similar themes created to survey managers and programmers working in clinical SAS programming industry and was surveyed online to collect their perspectives. Their views are compared for each theme and presented as results. Two surveys were created in www.surveymonkey.com. https://www.surveymonkey.com/s/SAS_India_managment_needvswant_survey. Programmer: https://www.surveymonkey.com/s/SAS_India_programmer_needvswant_survey. Bar chart and pie chart used on data collect to show segmentation of data. In conclusion, it seeks to highlight the future industry direction and the skillset that existing programmers need to have, in order to sustain the momentum and remain competitive, to contribute to the future pipeline and the development of the profession in India.

Fuzz Testing of Industrial Network Protocols in Programmable Logic Controllers

DTIC Science & Technology

2017-12-01

PLCs) are vital components in these cyber-physical systems. The industrial network protocols used to communicate between nodes in a control network...AB/RA) MicroLogix 1100 PLC through its implementation of EtherNet/IP, Common Industrial Protocol (CIP), and Programmable Controller Communication ...Commands (PCCC) communication protocols. This research also examines whether cross-generational vulnerabilities exist in the more advanced AB/RA

Relevance for Work in the Western Cape Tourism Industry of the National Certificate Vocational in Tourism Education at TVET Colleges

ERIC Educational Resources Information Center

Engelbrecht, Mardine; Spencer, John; van der Bijl, Andre

2017-01-01

This article investigates the relevance of the National Certificate Vocational (NCV) tourism programme for the South African tourism industry in terms of skills needed by tourism students to work in the tourism industry after graduating. The NCV programmes were introduced in 2007 at public Further Education and Training Colleges (now Technical,…

Student Teachers of Technology and Design into Industry: A Northern Ireland Case Study

ERIC Educational Resources Information Center

Gibson, Ken

2013-01-01

This paper, based in Northern Ireland, is a case study of an innovative programme which places year 3 B.Ed. post-primary student teachers of Technology and Design into industry for a five-day period. The industrial placement programme is set in an international context of evolving pre-service field placements and in a local context defined by the…

A New Enhanced Engineering Programme for Manufacturing Industries.

ERIC Educational Resources Information Center

Clark, C.; And Others

1985-01-01

Special Engineering Programmes (SEPs) were established in Great Britain to attract highly able students into engineering and to provide education/training to meet the needs of manufacturing industries. SEP philosophy and objectives, program structure, student selection, course assessment, and other areas are discussed. (JN)

Industrial Restructuring Training Programme. Evaluation Report.

ERIC Educational Resources Information Center

European Social Fund, Dublin (Ireland).

Ireland's Industrial Restructuring Training Programme (IRTP) was evaluated to determine its effectiveness as a vehicle for improving the managerial and supervisory skill levels of employees in existing enterprises. Data were collected from the following sources: review of all program-monitoring documents submitted since the IRTP's inception;…

Development of a model of the tobacco industry's interference with tobacco control programmes

PubMed Central

Trochim, W; Stillman, F; Clark, P; Schmitt, C

2003-01-01

Objective: To construct a conceptual model of tobacco industry tactics to undermine tobacco control programmes for the purposes of: (1) developing measures to evaluate industry tactics, (2) improving tobacco control planning, and (3) supplementing current or future frameworks used to classify and analyse tobacco industry documents. Design: Web based concept mapping was conducted, including expert brainstorming, sorting, and rating of statements describing industry tactics. Statistical analyses used multidimensional scaling and cluster analysis. Interpretation of the resulting maps was accomplished by an expert panel during a face-to-face meeting. Subjects: 34 experts, selected because of their previous encounters with industry resistance or because of their research into industry tactics, took part in some or all phases of the project. Results: Maps with eight non-overlapping clusters in two dimensional space were developed, with importance ratings of the statements and clusters. Cluster and quadrant labels were agreed upon by the experts. Conclusions: The conceptual maps summarise the tactics used by the industry and their relationships to each other, and suggest a possible hierarchy for measures that can be used in statistical modelling of industry tactics and for review of industry documents. Finally, the maps enable hypothesis of a likely progression of industry reactions as public health programmes become more successful, and therefore more threatening to industry profits. PMID:12773723

A programmable heater control circuit for spacecraft

NASA Technical Reports Server (NTRS)

Nguyen, D. D.; Owen, J. W.; Smith, D. A.; Lewter, W. J.

1994-01-01

Spacecraft thermal control is accomplished for many components through use of multilayer insulation systems, electrical heaters, and radiator systems. The heaters are commanded to maintain component temperatures within design specifications. The programmable heater control circuit (PHCC) was designed to obtain an effective and efficient means of spacecraft thermal control. The hybrid circuit provides use of control instrumentation as temperature data, available to the spacecraft central data system, reprogramming capability of the local microprocessor during the spacecraft's mission, and the elimination of significant spacecraft wiring. The hybrid integrated circuit has a temperature sensing and conditioning circuit, a microprocessor, and a heater power and control circuit. The device is miniature and housed in a volume which allows physical integration with the component to be controlled. Applications might include alternate battery-powered logic-circuit configurations. A prototype unit with appropriate physical and functional interfaces was procured for testing. The physical functionality and the feasibility of fabrication of the hybrid integrated circuit were successfully verified. The remaining work to develop a flight-qualified device includes fabrication and testing of a Mil-certified part. An option for completing the PHCC flight qualification testing is to enter into a joint venture with industry.

Welfare effects of a disease eradication programme for dairy goats.

PubMed

Muri, K; Leine, N; Valle, P S

2016-02-01

The Norwegian dairy goat industry has largely succeeded in controlling caprine arthritis encephalitis (CAE), caseous lymphadenitis (CLA) and paratuberculosis through a voluntary disease eradication programme called Healthier Goats (HG). The aim of this study was to apply an on-farm welfare assessment protocol to assess the effects of HG on goat welfare. A total of 30 dairy goat farms were visited, of which 15 had completed disease eradication and 15 had not yet started. Three trained observers assessed the welfare on 10 farms each. The welfare assessment protocol comprised both resource-based and animal-based welfare measures, including a preliminary version of qualitative behavioural assessments with five prefixed terms. A total of 20 goats in each herd were randomly selected for observations of human-animal interactions and physical health. The latter included registering abnormalities of eyes, nostrils, ears, skin, lymph nodes, joints, udder, claws and body condition score. For individual-level data, robust clustered logistic regression analyses with farm as cluster variable were conducted to assess the association with disease eradication. Wilcoxon rank-sum tests were used for comparisons of herd-level data between the two groups. Goats with swollen joints (indicative of CAE) and enlarged lymph nodes (indicative of CLA) were registered on 53% and 93% of the non-HG farms, respectively, but on none of the HG farms. The only other health variables with significantly lower levels in HG herds were skin lesions (P=0.008) and damaged ears due to torn out ear tags (P<0.001). Goats on HG farms showed less fear of unknown humans (P=0.013), and the qualitative behavioural assessments indicated that the animals in these herds were calmer than in non-HG herds. Significantly more space and lower gas concentrations reflected the upgrading of buildings usually done on HG farms. In conclusion, HG has resulted in some welfare improvements beyond the elimination of infectious diseases. The protocol was considered a useful tool to evaluate the welfare consequences of a disease eradication programme. However, larger sample sizes would increase the reliability of prevalence estimates for less common conditions and increase the power to detect differences between the groups. Despite the obvious link between disease and suffering, this aspect is rarely taken into account in the evaluation of disease control programmes. We therefore propose that welfare assessment protocols should be applied to evaluate the merits of disease control or eradication programmes in terms of animal welfare.

PhD Students' Work Conditions and Study Environment in University- and Industry-Based PhD Programmes

ERIC Educational Resources Information Center

Kolmos, A.; Kofoed, L. B.; Du, X. Y.

2008-01-01

During the last 10 years, new models of funding and training PhD students have been established in Denmark in order to integrate industry into the entire PhD education. Several programmes have been conducted where it is possible to co-finance PhD scholarships or to become an employee as an industrial PhD in a company. An important question is what…

Predictive Toxicology: Current Status and Future Outlook (EBI ...

EPA Pesticide Factsheets

Slide presentation at the EBI-EMBL Industry Programme Workshop on Predictive Toxicology and the currently status of Computational Toxicology activities at the US EPA. Slide presentation at the EBI-EMBL Industry Programme Workshop on Predictive Toxicology and the currently status of Computational Toxicology activities at the US EPA.

Programming Programmable Logic Controller. High-Technology Training Module.

ERIC Educational Resources Information Center

Lipsky, Kevin

This training module on programming programmable logic controllers (PLC) is part of the memory structure and programming unit used in a packaging systems equipment control course. In the course, students assemble, install, maintain, and repair industrial machinery used in industry. The module contains description, objectives, content outline,…

The Australian tar derby: the origins and fate of a low tar harm reduction programme

PubMed Central

King, W; Carter, S; Borland, R; Chapman, S; Gray, N

2003-01-01

Objective: To document the development of the low tar harm reduction programme in Australia, including tobacco industry responses. Data sources: Tobacco industry documents, retail tobacco journals, newspapers, medical journals, and Anti-Cancer Council of Victoria (ACCV) newsletters and archival records. Study selection: Documents on the strategies and knowledge bases of the ACCV, other Australian health authorities, and the tobacco industry. Results: The ACCV built a durable system for measuring and publicising the tar and nicotine yields of Australian cigarettes and influencing their development. The tobacco industry initially sought to block the development of this system but later appeared to cooperate with it, as is evidenced by the current market dominance of low tar brands. However, behind the scenes, the industry used its substantial knowledge advantage regarding compensatory smoking and its ability to re-engineer cigarettes to gain effective control of the system and subvert the ACCV's objectives. Conclusions: Replacement of the low tar programme with new means of minimising the harms from cigarette smoking should be a policy priority for the Australian government. This will require regulation, rather than further voluntary agreements, and stringent monitoring of successor programmes will be necessary. PMID:14645950

78 FR 58352 - Joint Industry Plan; Notice of Filing of Amendment No. 30 to the Joint Self-Regulatory...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-09-23

... SECURITIES AND EXCHANGE COMMISSION [Release No. 34-70429; File No. S7-24-89] Joint Industry Plan... Collection, Consolidation and Dissemination of Quotation and Transaction Information for Nasdaq-Listed... Exchange, Inc., New York Stock Exchange LLC, NYSE MKT LLC, and NYSE Arca, Inc. September 17, 2013. Pursuant...

Progress and Achievements at the Mid Term Stage of the Dragon 3 Programme

NASA Astrophysics Data System (ADS)

Desnos, Yves-Louis; Li, Zengyuan; Zmuda, Andy; Gao, Zhihai

2014-11-01

The Dragon Programme is a joint undertaking between ESA and the Ministry of Science and Technology (MOST) of China and the National Remote Sensing Center of China (NRSCC). Its purpose is to encourage increased exploitation of ESA and Chinese space resources within China as well as stimulate increased scientific cooperation in the field of Earth Observation (EO) science and applications between China and Europe. Since 2004, this pioneering programme has become a model for scientific and technological cooperation between China and Europe. By successfully encouraging joint research using ESA, Third Party Missions and Chinese EO data across a range of thematic areas, Dragon continues to deliver outstanding scientific results. The programme has successfully completed two phases, Dragon 1 from 2004 to 2008, Dragon 2 from 2008 to 2012. The third phase of Dragon was started in 2012 and will be completed in 2016. The Dragon 3 project teams are led by leading EO scientists and young scientists are also engaged on the projects. Advanced training in land, ocean and atmospheric applications is a feature of the programme and a course on land and one course on ocean applications have been successfully held in 2012 and 2013 in China. Here-in provided is an overview of the results, reporting and training activities at the mid-term stage of the programme.

Campus/Industry Joint Ventures.

ERIC Educational Resources Information Center

McDonald, Eugene J.

1985-01-01

Opportunities for joint economic ventures of colleges and industry are discussed, and a variety of ventures undertaken by Duke University are outlined, including a health club, hotel, and office building. Tax and financing considerations are noted. (MSE)

High pressure metrology for industrial applications

NASA Astrophysics Data System (ADS)

Sabuga, Wladimir; Rabault, Thierry; Wüthrich, Christian; Pražák, Dominik; Chytil, Miroslav; Brouwer, Ludwig; Ahmed, Ahmed D. S.

2017-12-01

To meet the needs of industries using high pressure technologies, in traceable, reliable and accurate pressure measurements, a joint research project of the five national metrology institutes and the university was carried out within the European Metrology Research Programme. In particular, finite element methods were established for stress-strain analysis of elastic and nonlinear elastic-plastic deformation, as well as of contact processes in pressure-measuring piston-cylinder assemblies, and high-pressure components at pressures above 1 GPa. New pressure measuring multipliers were developed and characterised, which allow realisation of the pressure scale up to 1.6 GPa. This characterisation is based on research including measurements of material elastic constants by the resonant ultrasound spectroscopy, hardness of materials of high pressure components, density and viscosity of pressure transmitting liquids at pressures up to 1.4 GPa and dimensional measurements on piston-cylinders. A 1.6 GPa pressure system was created for operation of the 1.6 GPa multipliers and calibration of high pressure transducers. A transfer standard for 1.5 GPa pressure range, based on pressure transducers, was built and tested. Herewith, the project developed the capability of measuring pressures up to 1.6 GPa, from which industrial users can calibrate their pressure measurement devices for accurate measurements up to 1.5 GPa.

Development and destruction of the first state funded anti-smoking campaign in the USA.

PubMed

Tsoukalas, T H; Glantz, S A

2003-06-01

Minnesota was the first state in the USA to implement a large state funded tobacco control programme (in 1985). Despite evidence of effectiveness, it was dismantled in 1993. To describe and analyse how and why these events transpired and identify lessons for tobacco control advocates facing similar challenges in the 21st century. Case study based on previously secret tobacco industry documents, news reports, research reports, official documents, and interviews with health advocates and state government officials. Unable to defeat funding for this campaign in 1985, the tobacco industry organised groups which eliminated it later. Despite the programme's documented effectiveness, it was dismantled based on claims of fiscal crisis. These claims were not true; the real debate was what to do with the state's surplus. Health advocates failed to challenge the claim of fiscal crisis or mobilise public support for the programme. Simply quoting evidence that a tobacco control programme is effective does not ensure its continuing survival. Claims of fiscal crisis are an effective cover for tobacco industry efforts to dismantle successful programmes, particularly if health advocates accept these claims and fail to mobilise political pressure to defend the programme.

Development and destruction of the first state funded anti-smoking campaign in the USA

PubMed Central

Tsoukalas, T; Glantz, S

2003-01-01

Background: Minnesota was the first state in the USA to implement a large state funded tobacco control programme (in 1985). Despite evidence of effectiveness, it was dismantled in 1993. Objective: To describe and analyse how and why these events transpired and identify lessons for tobacco control advocates facing similar challenges in the 21st century. Design: Case study based on previously secret tobacco industry documents, news reports, research reports, official documents, and interviews with health advocates and state government officials. Results: Unable to defeat funding for this campaign in 1985, the tobacco industry organised groups which eliminated it later. Despite the programme's documented effectiveness, it was dismantled based on claims of fiscal crisis. These claims were not true; the real debate was what to do with the state's surplus. Health advocates failed to challenge the claim of fiscal crisis or mobilise public support for the programme. Conclusions: Simply quoting evidence that a tobacco control programme is effective does not ensure its continuing survival. Claims of fiscal crisis are an effective cover for tobacco industry efforts to dismantle successful programmes, particularly if health advocates accept these claims and fail to mobilise political pressure to defend the programme. PMID:12773734

Fatigue Rated Fastener Systems

DTIC Science & Technology

1985-11-01

programme part also .how. that the »tatement "the higher th«. load traust.,, the shorter the tallgu. lite could not b. confirmed for all Joints. It might...realistic fatigue loading: the lite improvement mechanisms are more marked in these Joints than in .-.-* luad transfer/low secondary bending Joints...7050-T76 PRIMER REAM HI-LOK TEST SERIES NOT CLEARANCE 10-30 34432 11832 GH3 JRFS-A") COLD WORK VRFS -B) INTERFERENCE 15-35 >16773 >16044

Assessing the Higher National Diploma Chemical Engineering programme in Ghana: students' perspective

NASA Astrophysics Data System (ADS)

Boateng, Cyril D.; Cudjoe Bensah, Edem; Ahiekpor, Julius C.

2012-05-01

Chemical engineers have played key roles in the growth of the chemical and allied industries in Ghana but indigenous industries that have traditionally been the domain of the informal sector need to be migrated to the formal sector through the entrepreneurship and innovation of chemical engineers. The Higher National Diploma Chemical Engineering programme is being migrated from a subject-based to a competency-based curriculum. This paper evaluates the programme from the point of view of students. Data were drawn from a survey conducted in the department and were analysed using SPSS. The survey involved administering questionnaires to students at all levels in the department. Analysis of the responses indicated that the majority of the students had decided to pursue chemical engineering due to the career opportunities available. Their knowledge of the programme learning outcomes was, however, poor. The study revealed that none of the students was interested in developing indigenous industries.

Critical Factors Underlying Students' Choice of Institution for Graduate Programmes: Empirical Evidence from Ghana

ERIC Educational Resources Information Center

Mbawuni, Joseph; Nimako, Simon Gyasi

2015-01-01

The growth in higher education industry has caused a tremendous increase in the number and type of colleges, polytechnics and universities offering similar academic programmes especially in business disciplines in Ghana. The resultant competition in the education industry makes it crucial for education managers to understand the latent factors…

Developing a New Industrial Engineering Curriculum Using a Systems Engineering Approach

ERIC Educational Resources Information Center

Buyurgan, Nebil; Kiassat, Corey

2017-01-01

This paper reports on the development of an engineering curriculum for a new industrial engineering programme at a medium-sized private university in the northeast United States. A systems engineering process has been followed to design and develop the new curriculum. Considering the programme curriculum as a system, first the stakeholders have…

Challenging Transitions: Trades and Trade-Offs for Racialised Youth in Canada's Mining Industry

ERIC Educational Resources Information Center

Hodgkins, Andrew

2016-01-01

This article examines the precarious learning-to-work transitions experienced by aboriginal youth in the Canadian oil sands mining industry. Drawing from an empirical case study of a mine-sponsored, pre-apprenticeship training programme, challenges experienced by programme participants, as well as their socialisation into the world of work are…

Influence of training on the biokinematics in trotting Andalusian horses.

PubMed

Cano, M R; Miró, F; Diz, A M; Agüera, E; Galisteo, A M

2000-11-01

The aim of this study was to determine the influence of a 10-month training programme on the linear, temporal and angular characteristics of the fore and hind limbs at the trot in the Andalusian horse, using standard computer-aided videography. Sixteen male Andalusian horses were observed before and after training. Six strides were randomly selected for analysis in each horse and linear, temporal and angular parameters were calculated for fore and hind limbs. The training programme used here produced significant changes in kinematic parameters, such as shortening of stride length, and increase in swing duration and a decrease in hind limb stance percentage. No significant differences were recorded in the angular values for the forelimb joints. In trained horses, the more proximal joints of the hind limb, especially the hip and stifle, had a greater flexion while the fetlock showed a smaller extension angle. At the beginning of the swing phase, hip and stifle joints presented angles that were significantly more flexed. When the hind limbs came into contact with the ground, all the joints presented greater flexion after training.

Effectiveness of telerehabilitation programme following surgery in shoulder impingement syndrome (SIS): study protocol for a randomized controlled non-inferiority trial.

PubMed

Pastora-Bernal, Jose-Manuel; Martín-Valero, Rocío; Barón-López, Francisco Javier; García-Gómez, Oscar

2017-02-23

Shoulder pain is common in society, with high prevalence in the general population. Shoulder impingement syndrome (SIS) is the most frequent cause. Patients suffer pain, muscle weakness and loss of movement in the affected joint. Initial treatment is predominantly conservative. The surgical option has high success rates and is often used when conservative strategy fails. Traditional physiotherapy and post-operative exercises are needed for the recovery of joint range, muscle strength, stability and functionality. Telerehabilitation programmes have shown positive results in some orthopaedic conditions after surgery. Customized telerehabilitation intervention programmes should be developed to recover shoulder function after SIS surgery. The objective of this study is to evaluate the feasibility and effectiveness of a telerehabilitation intervention compared with usual care in patients after subacromial decompression surgery. We will compare an intervention group receiving videoconferences and a telerehabilitation programme to a control group receiving traditional physiotherapy intervention in a single-blind, randomized controlled non-inferiority trial study design. Through this study, we will further develop our preliminary data set and practical experience with the telerehabilitation programmes to evaluate their effectiveness and compare this with traditional intervention. We will also explore patient satisfaction and cost-effectiveness. Patient enrolment is ongoing. ClinicalTrials.gov, NCT02909920 . 14 September 2016.

Project Copernicus: Cooperation Programme in Europe on Nature and Industry through Coordinated University Study. Round Table. Unesco-Standing Conference of Rectors, Presidents, and Vice Chancellors of the European Universities (CRE) (Catania, Sicily, April 5-8, 1989). Number 32. Papers on Higher Education.

ERIC Educational Resources Information Center

United Nations Educational, Scientific, and Cultural Organization, Paris (France).

This Project COPERNICUS (Cooperation Programme in Europe for Research on Nature and Industry through Coordinated University Studies) Round Table report considers efforts to identify priorities and objectives of the new alliance between the higher education community, industry, and international organizations in addressing today's environmental…

Science Teachers Accelerated Programme Model: A Joint Partnership in the Pacific Region

ERIC Educational Resources Information Center

Sharma, Bibhya; Lauano, Faatamali'i Jenny; Narayan, Swasti; Anzeg, Afshana; Kumar, Bijeta; Raj, Jai

2018-01-01

The paper heralds a new pedagogical model known as the Science Teachers Accelerated Programme as a platform to upgrade the qualifications of secondary school science teachers throughout the Pacific region. Based on a tripartite partnership between a higher education provider, a regional government and a cohort of science teachers, the model offers…

Experiential Learning in Education for Sustainable Development: Experiences from a Czech-Kazakh Social Learning Programme

ERIC Educational Resources Information Center

Cincera, Jan

2013-01-01

The article presents experience from a joint Czech-Kazakh project based on experiential education. The goal of the project was to develop trust and cooperation between various stakeholders to promote effective public participation in local sustainable development issues in Kazakhstan. The article describes the methodology of the programme and its…

Studying Computer Science in a Multidisciplinary Degree Programme: Freshman Students' Orientation, Knowledge, and Background

ERIC Educational Resources Information Center

Kautz, Karlheinz; Kofoed, Uffe

2004-01-01

Teachers at universities are facing an increasing disparity in students' prior IT knowledge and, at the same time, experience a growing disengagement of the students with regard to involvement in study activities. As computer science teachers in a joint programme in computer science and business administration, we made a number of similar…

Arizona's tobacco control initiative illustrates the need for continuing oversight by tobacco control advocates

PubMed Central

Bialous, S. A.; Glantz, S.

1999-01-01

BACKGROUND—In 1994, Arizona voters approved Proposition 200 which increased the tobacco tax and earmarked 23% of the new revenues for tobacco education programmes.
OBJECTIVE—To describe the campaign to pass Proposition 200, the legislative debate that followed the passage of the initiative, and the development and implementation of the tobacco control programme.
DESIGN—This is a case study. Data were collected through semi-structured interviews with key players in the initiative campaign and in the tobacco education programme, and written records (campaign material, newspapers, memoranda, public records).
RESULTS—Despite opposition from the tobacco industry, Arizonans approved an increase in the tobacco tax. At the legislature, health advocates in Arizona successfully fought the tobacco industry attempts to divert the health education funds and pass preemptive legislation. The executive branch limited the scope of the programme to adolescents and pregnant women. It also prevented the programme from attacking the tobacco industry or focusing on secondhand smoke. Health advocates did not put enough pressure at the executive branch to force it to develop a comprehensive tobacco education programme.
CONCLUSIONS—It is not enough for health advocates to campaign for an increase in tobacco tax and to protect the funds at the legislature. Tobacco control advocates must closely monitor the development and implementation of tax-funded tobacco education programmes at the administrative level and be willing to press the executive to implement effective programmes.


Keywords: tobacco tax; health education; advocacy PMID:10478397

External Confirmation of Adherence to Standards: As Applicable to Academic Programmes as to Business and Industry

ERIC Educational Resources Information Center

Hughey, Aaron W.; Burke, Monica G.

2010-01-01

The development of, and adherence to, performance standards is imperative for success in today's competitive global market. This is as true for academic programmes in higher education as it is for the manufacturing and service sectors. Just like their counterparts in business and industry, it is important that graduate career preparation…

Assessment of Industrial Attachment: Issues and Concerns of Chinhoyi University of Technology's Undergraduate Degree Programme, Zimbabwe

ERIC Educational Resources Information Center

Chinyemba, Fredreck; Bvekerwa, Sailos T.

2012-01-01

This article presents findings from an action research that explored industrial attachment supervision and assessment issues and concerns of CUT's (Chinhoyi University of Technology) undergraduate degree programme. The study was motivated by the observation that there is no research project contacted in order to determine the social and economic…

Seven Years of Linking Scottish Schools and Industry with SSTN

ERIC Educational Resources Information Center

Whittington, Gary; Lowson, Sandra

2007-01-01

The Scottish Science and Technology Network (SSTN) is a major collaboration between Careers Scotland and Scottish industry to promote science and technology via an on-line and integrated learning programme. An initial two-year pilot project has grown considerably and has now been running for over 7 years. The SSTN programme is a web-based…

Improving educational objectives of the Industrial and Management Systems Engineering programme at Kuwait University

NASA Astrophysics Data System (ADS)

Aldowaisan, Tariq; Allahverdi, Ali

2016-05-01

This paper describes the process of developing programme educational objectives (PEOs) for the Industrial and Management Systems Engineering programme at Kuwait University, and the process of deployment of these PEOs. Input of the four constituents of the programme, faculty, students, alumni, and employers, is incorporated in the development and update of the PEOs. For each PEO an assessment process is employed where performance measures are defined along with target attainment levels. Results from assessment tools are compared with the target attainment levels to measure performance with regard to the PEOs. The assessment indicates that the results meet or exceed the target attainment levels of the PEOs' performance measures.

76 FR 5227 - Joint Industry Plan; Notice of Filing and Immediate Effectiveness of Amendment No. 24 to the...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-01-28

... Organization Plan Governing the Collection, Consolidation and Dissemination of Quotation and Transaction...., EDGA Exchange, Inc., EDGX Exchange, Inc., Financial Industry Regulatory Authority, Inc., International... Joint Self- [[Page 5228

Integrated High-Speed Torque Control System for a Robotic Joint

NASA Technical Reports Server (NTRS)

Davis, Donald R. (Inventor); Radford, Nicolaus A. (Inventor); Permenter, Frank Noble (Inventor); Valvo, Michael C. (Inventor); Askew, R. Scott (Inventor)

2013-01-01

A control system for achieving high-speed torque for a joint of a robot includes a printed circuit board assembly (PCBA) having a collocated joint processor and high-speed communication bus. The PCBA may also include a power inverter module (PIM) and local sensor conditioning electronics (SCE) for processing sensor data from one or more motor position sensors. Torque control of a motor of the joint is provided via the PCBA as a high-speed torque loop. Each joint processor may be embedded within or collocated with the robotic joint being controlled. Collocation of the joint processor, PIM, and high-speed bus may increase noise immunity of the control system, and the localized processing of sensor data from the joint motor at the joint level may minimize bus cabling to and from each control node. The joint processor may include a field programmable gate array (FPGA).

A Crossover Trial Evaluating an Educational-Behavioral Joint Protection Programme for People with Rheumatoid Arthritis.

ERIC Educational Resources Information Center

Hammond, A.; Lincoln, N.; Sutcliffe, L.

1999-01-01

Joint protection, a self-management technique taught to people with rheumatoid arthritis, was used in a group education program. A crossover trial (N=35) was conducted. No significant changes in measures of pain, functional disability, grip strength, self-efficacy or helplessness occurred post-education, although this may have been due to the…

Reciprocal Learning by Experienced Teachers and Their Educators on a Master's Degree Programme in the Netherlands

ERIC Educational Resources Information Center

van Swet, Jacqueline; Ponte, Petra

2007-01-01

This article reports findings from a case study into reciprocal learning in tutor groups in a research-based master's programme, run jointly by Roehampton University, London, UK and Fontys OSO, The Netherlands. The research was designed to investigate to what extent, and how, forms of reciprocal learning arose in tutor groups for experienced…

Students' Strategies for Learning Identities as Industrial Workers in a Swedish Upper Secondary School VET Programme

ERIC Educational Resources Information Center

Ferm, Lisa; Persson Thunqvist, Daniel; Svensson, Louise; Gustavsson, Maria

2018-01-01

The aim of this article is to investigate the learning strategies vocational students use to become part of a work community, and how these strategies are related to the formation of a vocational identity at the workplace. Conducting qualitative interviews, data were collected from 44 industrial programme students from six upper secondary schools.…

Public health foundations and the tobacco industry: lessons from Minnesota

PubMed Central

Ibrahim, J; Tsoukalas, T; Glantz, S

2004-01-01

Objective: To investigate whether private foundations can be created in a way that will insulate them from attacks by the tobacco industry, using the Minnesota Partnership for Action Against Tobacco (MPAAT) as a case study. Design: Information was collected from internal tobacco industry documents, court documents, newspapers, and interviews with health advocates and elected officials. Results: The creation of MPAAT as an independent foundation did not insulate it from attacks by tobacco industry allies. During 2001–2002, MPAAT was repeatedly attacked by Attorney General Mike Hatch and major media, using standard tobacco industry rhetoric. This strategy of attack and demands for information were reminiscent of previous attacks on Minnesota's Plan for Nonsmoking and Health and the American Stop Smoking Intervention Study (ASSIST). MPAAT was ultimately forced to restructure its programme to abandon effective community norm change interventions around smoke-free policies and replace them with less effective individual cessation interventions. Neither MPAAT nor other health advocates mounted an effective public response to these attacks, instead relying on the insider strategy of responding in court. Conclusion: It is not possible to avoid attacks by the tobacco industry or its political allies. Like programmes administered by government agencies, tobacco control foundations must be prepared for these attacks, including a proactive plan to educate the public about the principles of community based tobacco control. Public health advocates also need to be willing to take prompt action to defend these programmes and hold public officials who attack tobacco control programmes accountable for their actions. PMID:15333877

Systems integration for the Kennedy Space Center (KSC) Robotics Applications Development Laboratory (RADL)

NASA Technical Reports Server (NTRS)

Davis, V. Leon; Nordeen, Ross

1988-01-01

A laboratory for developing robotics technology for hazardous and repetitive Shuttle and payload processing activities is discussed. An overview of the computer hardware and software responsible for integrating the laboratory systems is given. The center's anthropomorphic robot is placed on a track allowing it to be moved to different stations. Various aspects of the laboratory equipment are described, including industrial robot arm control, smart systems integration, the supervisory computer, programmable process controller, real-time tracking controller, image processing hardware, and control display graphics. Topics of research include: automated loading and unloading of hypergolics for space vehicles and payloads; the use of mobile robotics for security, fire fighting, and hazardous spill operations; nondestructive testing for SRB joint and seal verification; Shuttle Orbiter radiator damage inspection; and Orbiter contour measurements. The possibility of expanding the laboratory in the future is examined.

[Primary Prevention of Mental Disorders in Children of Mentally Ill Parents. The Kanu Programme "Canoe--Moving Jointly Forward"].

PubMed

Linthorst, K; Bauer, U; Osipov, I; Pinheiro, P; Rehder, M

2015-09-01

Children of parents who suffer from mental health disorders are more likely to develop mental disorders than children of parents not suffering from mental disorders. For children at risk, preventive strategies are hardly available and, if available, rarely supported by a scientific evaluation. "Kanu - Gemeinsam weiterkommen (canoe - moving jointly forward)" is a preventive strategy that was developed within a research project focusing on primary prevention in children who live in families with parents affected by mental disorders. The intervention is characterised by a multi-modular concept and was tested in the adult psychiatric setting. Preliminary results indicate a preventive impact of the intervention programme. © Georg Thieme Verlag KG Stuttgart · New York.

Programmable Logic Controllers.

ERIC Educational Resources Information Center

Insolia, Gerard; Anderson, Kathleen

This document contains a 40-hour course in programmable logic controllers (PLC), developed for a business-industry technology resource center for firms in eastern Pennsylvania by Northampton Community College. The 10 units of the course cover the following: (1) introduction to programmable logic controllers; (2) DOS primer; (3) prerequisite…

Recent progress in high pressure metrology in Europe

NASA Astrophysics Data System (ADS)

Sabuga, Wladimir; Pražák, Dominik; Rabault, Thierry

2014-08-01

Five European national metrology institutes in collaboration with a university, a research institute and five industrial companies are working on a joint research project within a framework of the European Metrology Research Programme aimed at development of 1.6 GPa primary and 1.5 GPa transfer pressure standards. Two primary pressure standards were realised as pressure-measuring multipliers, each consisting of a low pressure and a high pressure (HP) piston-cylinder assembly (PCA). A special design of the HP PCAs was developed in which a tungsten carbide cylinder is supported by two thermally shrunk steel sleeves and, additionally, by jacket pressure applied to the outside of the outer sleeve. Stress-strain finite element analysis (FEA) was performed to predict behaviour of the multipliers and a pressure generation system. With FEA, the pressure distortion coefficient was determined, taking into account irregularities of the piston-cylinder gap. Transfer pressure standards up to 1.5 GPa are developed on the basis of modern 1.5 GPa pressure transducers. This project shall solve a discrepancy between the growing needs of the industry demanding precise traceable calibrations of the high pressure transducers and the absence of adequate primary standards for pressures higher than 1 GPa in the European Union today.

The first Spanish space programme 1968 1974

NASA Astrophysics Data System (ADS)

Dorado, José M.

2007-06-01

This paper presents the situation of the Spanish aeronautical industry in the early 1960s, the problems suffered during the first ESRO years, the situation in 1975 as a result of the first National Space Programme (1968-1974) and the specific developments carried out within that programme: the first Spanish satellite successfully launched in 1974 (INTASAT) and the first INTA sounding rockets launched from the own Arenosillo range. This justifies the importance of that Programme for the Spanish aeronautical industry, a programme that permitted its transition to the aerospace field. In parallel, agreements with NASA led to the installation of large space ground stations in Spain operated by INTA personnel, to support major NASA space missions, and to the operation of a very active rockets range. These actions allowed Spain to have one of the largest space sectors in Europe, in those years. This paper's purpose is to find out the main reasons behind this effort.

Strength of Welded Joints in Tubular Members for Aircraft

NASA Technical Reports Server (NTRS)

Whittemore, H L; Brueggeman, W C

1931-01-01

The object of this investigation is to make available to the aircraft industry authoritative information on the strength, weight, and cost of a number of types of welded joints. This information will, also, assist the aeronautics branch in its work of licensing planes by providing data from which the strength of a given joint may be estimated. As very little material on the strength of aircraft welds has been published, it is believed that such tests made by a disinterested governmental laboratory should be of considerable value to the aircraft industry. Forty joints were welded under procedure specifications and tested to determine their strengths. The weight and time required to fabricate were also measured for each joint.

FAO UN-REDD- INPE Joint Programme on Forest Monitoring Systems based on RS and GIS techniques

NASA Astrophysics Data System (ADS)

Jonckheere, I. G.; FAO UN-REDD MRV Team

2010-12-01

Capacity Development and Training for National Forest Monitoring Systems for Reducing Emissions from Deforestation and Forest Degradation in Developing Countries (REDD+) REDD+, which stands for ’Reducing Emissions from Deforestation and Forest Degradation in Developing Countries’ - is an effort to create a financial value for the carbon stored in forests, offering incentives for developing countries to reduce emissions from forested lands and invest in low-carbon paths to sustainable development. The UN-REDD Programme, a collaborative partnership between FAO, UNDP and UNEP launched in September 2008, supports countries to develop capacity to REDD+ and to implement a future REDD+ mechanism in a post-2012 climate regime. The programme works at both the national and global scale, through support mechanisms for country-driven REDD strategies and international consensus-building on REDD+ processes. The UN-REDD Programme gathers technical teams from around the world to develop common approaches, analyses and guidelines on issues such as measurement, reporting and verification (MRV) of carbon emissions and flows, remote sensing, and greenhouse gas inventories. Within the partnership, FAO supports countries on technical issues related to forestry and the development of cost effective and credible MRV processes for emission reductions. While at the international level, it fosters improved guidance on MRV approaches, including consensus on principles and guidelines for MRV and training programmes. It provides guidance on how best to design and implement REDD+, to ensure that forests continue to provide multiple benefits for livelihoods and biodiversity to societies while storing carbon at the same time. Other areas of work include national forest assessments and monitoring of in-country policy and institutional change. FAO and INPE (Brazilian Space Agency) have joint forces through a MoU signed last year in Copenhagen. A major joint programme has been agreed upon to set up national forest satellite monitoring systems in the developing countries and to train them in order to get them ready for REDD+. The outcomes about the role of satellite remote sensing technologies as a tool for monitoring, assessment, reporting and verification of carbon credits and co-benefits under the REDD+ mechanism are here presented.

Transcript of the Joint FAA/Industry Symposium on Level B Airplane simulator aeromodel validation requirements

DOT National Transportation Integrated Search

1996-03-13

"This is the transcript of the Joint FAA/Industry Symposium on Level B Airplane Simulator Aeromodel Validation Requirements held on March 13-14, 1996, at the Washington Dulles Airport Hilton. The purpose of the meeting was to discuss the aeromodeling...

76 FR 13442 - Joint Industry Plan; Order Approving Amendment No. 25 to the Joint Self-Regulatory Organization...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-03-11

..., Consolidation and Dissemination of Quotation and Transaction Information for Nasdaq-Listed Securities Traded on... Exchange, Inc., Financial Industry Regulatory Authority, Inc., International Securities Exchange LLC...-Regulatory Organization Plan Governing the Collection, Consolidation, and Dissemination of Quotation and...

76 FR 5231 - Joint Industry Plan; Notice of Filing and Immediate Effectiveness of Amendment No. 23 to the...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-01-28

... Organization Plan Governing the Collection, Consolidation and Dissemination of Quotation and Transaction...., EDGA Exchange, Inc., EDGX Exchange, Inc., Financial Industry Regulatory Authority, Inc., International... Joint Self-Regulatory Organization Plan Governing the Collection, Consolidation, and Dissemination of...

75 FR 56651 - ITS Joint Program Office; Trucking Industry Mobility & Technology Coalition Annual Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2010-09-16

...: Beating Gridlock with a Smart Grid; U.S. DOT Truck Technology Initiatives; and State and Federal... DEPARTMENT OF TRANSPORTATION ITS Joint Program Office; Trucking Industry Mobility & Technology Coalition Annual Meeting AGENCY: Research and Innovative Technology Administration, U.S. Department of...

[From mandatory to participatory prevention: a model applied to the upholstered furniture industry].

PubMed

Di Leone, G; Trani, G; Falco, S; Attimonelli, Rossella; Carino, M; Lagravinese, D

2008-01-01

The Italian 2006-2008 National Health Plan emphasizes synergy and cooperation between the agencies formally involved in the prevention of occupational risks, in agreement with social partners. The so-called 'triangle of the sofa industry' is an interregional geographic area south-west of Bari, Italy. In 2003 this area produced 16% of the world-wide upholstered furniture output, with more than 500 plants of varying size. The aim was to set up a network of communication and cooperation between the competent Agencies and Regions in order to address the rising trend of upper limb work-related musculoskeletal disorders. The first step of the National Health Service Unit in Bari was to assess risk via a Ministerial research project and implement various information campaigns involving institutions, occupational physicians, private companies and public opinion. In a subsequent phase a synergy between the local Departmenst ofPrevention of the different Regions, the Italian Institute for Insurance Occupational Accidents and Disease (INAIL), the trade unions and the upholstered furniture industry Association was established. New joint experimental projects (cutting tools, ergonomic table for assemblers, instruments for isokinetic evaluation) were launched together with training programmes for management, safety technicians and workers. This kind of 'participatory prevention' is more appropriate for the goal of a collaborative effort in order to assist the companies, which is a modern interpretation of the mission of public health prevention operators.

Joint Decision No. KEP-235/MEN 1985 and No. 114/MENKES/SKB/111/1985 and Joint Decision No. KEP-333/MEN/1985 and No. 15/MENKES/SKB/IV/1985, 1985.

PubMed

1988-01-01

Under these Joint Decisions, all industrial establishments employing 300 or more workers are obliged to establish an in-plant health clinic and to provide contraceptive services to eligible worker couples. Under Joint Decree No. KEP.12/MEN/1984 of the Ministry of Manpower, the Indonesian Labor Federation and the Indonesian Employers Association agreed to step up their family planning efforts in the industrial sector with the cooperation of the National Family Planning Coordinating Board. full text

Measuring soot particles from automotive exhaust emissions

NASA Astrophysics Data System (ADS)

Andres, Hanspeter; Lüönd, Felix; Schlatter, Jürg; Auderset, Kevin; Jordan-Gerkens, Anke; Nowak, Andreas; Ebert, Volker; Buhr, Egbert; Klein, Tobias; Tuch, Thomas; Wiedensohler, Alfred; Mamakos, Athanasios; Riccobono, Francesco; Discher, Kai; Högström, Richard; Yli-Ojanperä, Jaakko; Quincey, Paul

2014-08-01

The European Metrology Research Programme participating countries and the European Union jointly fund a three year project to address the need of the automotive industry for a metrological sound base for exhaust measurements. The collaborative work on particle emissions involves five European National Metrology Institutes, the Tampere University of Technology, the Joint Research Centre for Energy and Transport and the Leibniz Institute for Tropospheric Research. On one hand, a particle number and size standard for soot particles is aimed for. Eventually this will allow the partners to provide accurate and comparable calibrations of measurement instruments for the type approval of Euro 5b and Euro 6 vehicles. Calibration aerosols of combustion particles, silver and graphite proof partially suitable. Yet, a consensus choice together with instrument manufactures is pending as the aerosol choice considerably affects the number concentration measurement. Furthermore, the consortium issued consistent requirements for novel measuring instruments foreseen to replace today's opacimeters in regulatory periodic emission controls of soot and compared them with European legislative requirements. Four partners are conducting a metrological validation of prototype measurement instruments. The novel instruments base on light scattering, electrical, ionisation chamber and diffusion charging sensors and will be tested at low and high particle concentrations. Results shall allow manufacturers to further improve their instruments to comply with legal requirements.

Competency Mapping Framework for Regulating Professionally Oriented Degree Programmes in Higher Education

ERIC Educational Resources Information Center

Perera, Srinath; Babatunde, Solomon Olusola; Zhou, Lei; Pearson, John; Ekundayo, Damilola

2017-01-01

Recognition of the huge variation between professional graduate degree programmes and employer requirements, especially in the construction industry, necessitated a need for assessing and developing competencies that aligned with professionally oriented programmes. The purpose of this research is to develop a competency mapping framework (CMF) in…

7 CFR 1427.5 - General eligibility requirements.

Code of Federal Regulations, 2011 CFR

2011-01-01

... adopted by the Joint Cotton Industry Bale Packaging Committee sponsored by the National Cotton Council of America for the applicable year or that are identified and approved by the Joint Industry Bale Packaging... the cotton. (l) Commodities produced under a contract in which the title to the seed remains with the...

A Joint Vision for Secondary and Higher Education for All in Europe: The Road towards Realising Sustainable Development Goal 4 in Europe

ERIC Educational Resources Information Center

European Students' Union, 2016

2016-01-01

The present joint action programme is proposed by the Organising Bureau of European School Student Unions (OBESSU), the European Students' Union (ESU), and Education International (EI) to their members and partners, in order to advance the 2030 Agenda for Sustainable Development and its 17 related goals, which the United Nations adopted in…

Backing the winners and the research infrastructure.

PubMed

Leliveld, H

1985-04-26

The industrial policy of the Dutch government is a priority area policy, that backs the winners of today and, even more, the potential winners of tomorrow. Important elements of this policy are the selection of high-chance activities, setting up new and informal relationships, promoting co-operation and supporting industrial research and development. To this end the government has set up Innovative Research Programmes and an Innovation Stimulation Scheme. Co-operation of universities and industry is essential for these programmes to succeed. Also international co-operation is a precondition to a firm position of European industry. The establishment of the Center for Bio-Pharmaceutical Sciences is entirely in line with the objectives of this policy.

Continuous improvement in the Industrial and Management Systems Engineering programme at Kuwait University

NASA Astrophysics Data System (ADS)

Aldowaisan, Tariq; Allahverdi, Ali

2016-07-01

This paper describes the process employed by the Industrial and Management Systems Engineering programme at Kuwait University to continuously improve the programme. Using a continuous improvement framework, the paper demonstrates how various qualitative and quantitative analyses methods, such as hypothesis testing and control charts, have been applied to the results of four assessment tools and other data sources to improve performance. Important improvements include the need to reconsider two student outcomes as they were difficult to implement in courses. In addition, through benchmarking and the engagement of Alumni and Employers, key decisions were made to improve the curriculum and enhance employability.

PRN 2011-1: Residential Exposure Joint Venture

EPA Pesticide Factsheets

This PR Notice is to advise registrants of an industry-wide joint venture, titled the Residential Exposure Joint Venture (REJV), which has developed a national survey regarding residential consumer use/usage data for pesticides.

A pre-operative group rehabilitation programme provided limited benefit for people with severe hip and knee osteoarthritis.

PubMed

Wallis, Jason A; Webster, Kate E; Levinger, Pazit; Fong, Cynthia; Taylor, Nicholas F

2014-01-01

To determine if a pre-operative group rehabilitation programme can improve arthritis self-efficacy for people with severe hip and knee osteoarthritis. Single group, repeated measures design: 4-week baseline phase followed by a 6-week intervention phase of water exercise, and education with self-management strategies. The primary outcome was arthritis self-efficacy. The secondary outcomes were measures of pain (WOMAC), activity limitation (WOMAC), activity performance (30 s chair stand test, 10 m walk test) and health-related quality of life (EuroQol). Twenty participants (10 knee osteoarthritis and 10 hip osteoarthritis) with a mean age of 71 years (SD 7) attended 92% (SD 10%) of the scheduled sessions. All measures demonstrated baseline stability between two time points for measurements at week 1 and measurements at week 4. After the 6-week intervention programme there were no significant improvements for arthritis self-efficacy. There was a 12% increase for fast walking speed (mean increase of 0.14 m/s, 95% CI 0.07, 0.22). There were no significant improvements for other secondary outcomes. A pre-operative water-based exercise and educational programme did not improve arthritis self-efficacy, self-reported pain and activity limitation, and health-related quality of life for people with hip and knee osteoarthritis who were candidates for joint replacement. While there was a significant increase in one measure of activity performance (walking speed), these findings suggest the current programme may be of little value. Implications for Rehabilitation This pre-operative group rehabilitation programme for people with severe hip and knee osteoarthritis did not change arthritis self-efficacy, pain, activity limitation and health-related quality of life. This programme may have little value in preparing people for joint replacement surgery. The optimal pre-operative programme requires further design and investigation.

Beneath the veil--health records in the Middle East.

PubMed

Harrison, K

2000-06-01

The healthcare industry is a fast-growing, dynamic industry within the UAE today. It is a basic necessity that is constantly changing in line with advancing technology, and the need to provide the right service to the right patient at the right time. The MAT programme aims to provide its students with the education necessary to enable them to meet and exceed the needs of these demands. The three cornerstones of this programme will ensure that this is achieved, as with quality, standards and confidentiality for clear signposts to industry relevance, the students cannot fail to reach their potential.

Summary proceedings of the joint industry-FAA conference on the development and use of PC-based aviation training devices.

DOT National Transportation Integrated Search

1994-11-01

This report is a summarization of the proceedings of a joint industry FAA conference on the development and use of PC-based aviation training devices (PCATDs) that was held June 16-17, 1994, in Oklahoma City, Oklahoma. Attendees to the conference inc...

76 FR 31457 - Airworthiness Directives; Diamond Aircraft Industries GmbH Model DA 42 Airplanes

Federal Register 2010, 2011, 2012, 2013, 2014

2011-06-01

... Airworthiness Directives; Diamond Aircraft Industries GmbH Model DA 42 Airplanes AGENCY: Federal Aviation... reportedly found on DA 42 Main Landing Gear (MLG) Damper-to-Trailing Arm joints during standard maintenance... DA 42 Main Landing Gear (MLG) Damper-to-Trailing Arm joints during standard maintenance. Depending on...

The role of small satellites in the development of the South African space programme

NASA Astrophysics Data System (ADS)

Martinez, Peter

In the 1990s a team of scientists and engineers at Stellenbosch University built the first South African satellite to fly in space, the 64-kg Sunsat. This university-based satellite programme took advantage of the skills and facilities developed in the previous South African space programme of the 1980s and early 1990s, which had developed a much larger satellite (Greensat), but was cancelled in the mid-1990s prior to launch. Sunsat incorporated a number of novel capabilities for a microsatellite platform, and interest was shown in these technologies by other groups developing similar satellites. As the University was not the ideal environment to develop the commercial potential of these microsatellite technologies, a company called Sunspace was later established, thus creating industrial capacity in South Africa in a niche area of space technology. This new industrial capability, together with the infrastructure from the previous space programme, have created a foundation upon which to build the new South African space programme. This paper discusses the historical, current and possible future roles of small satellites in the development of the South African space programme.

Energy Efficiency in India: Challenges and Initiatives

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ajay Mathur

May 13, 2010 EETD Distinguished Lecture: Ajay Mathur is Director General of the Bureau of Energy Efficiency, and a member of the Prime Minister's Council on Climate Change. As Director General of BEE, Dr. Mathur coordinates the national energy efficiency programme, including the standards and labeling programme for equipment and appliances; the energy conservation building code; the industrial energy efficiency programme, and the DSM programmes in the buildings, lighting, and municipal sectors.

Energy Efficiency in India: Challenges and Initiatives

ScienceCinema

Ajay Mathur

2017-12-09

May 13, 2010 EETD Distinguished Lecture: Ajay Mathur is Director General of the Bureau of Energy Efficiency, and a member of the Prime Minister's Council on Climate Change. As Director General of BEE, Dr. Mathur coordinates the national energy efficiency programme, including the standards and labeling programme for equipment and appliances; the energy conservation building code; the industrial energy efficiency programme, and the DSM programmes in the buildings, lighting, and municipal sectors.

Military Transformation and the Defense Industry After Next: The Defense Industrial Implications of Network-Centric Warfare

DTIC Science & Technology

2002-09-01

including suggestions for reducing this burden, to Washington Headquarters Services , Directorate for Information Operations and Reports, 1215 Jefferson...require the acquisition of unfamiliar weapons and support systems. Joint and service visions of the military after next raise serious questions that...and the U.S. Defense Industry The U.S. military is awash in visions of transformation. There is an array of joint and service visions of what has become

JPRS Report, Science & Technology. USSR: Science & Technology Policy

DTIC Science & Technology

1989-10-23

Soviet Programmers Form Joint Venture with Olivetti; Scientist Debate Reoccupation of Chernobyl Radiation Zones; Effect of Cost Accounting on Scientific Research; Lithuanian State Prizes for S&T Awarded; and others.

PREFACE: 15th Latin American Workshop on Plasma Physics (LAWPP 2014) and 21st IAEA TM on Research Using Small Fusion Devices (RUSFD)

NASA Astrophysics Data System (ADS)

Iván Vargas-Blanco, V.; Herrera-Velázquez, J. Julio E.

2015-03-01

Written contributions from participants of the Joint 15th Latin American Workshop on Plasma Physics (LAWPP 2014) - 21st IAEA Technical Meeting on Research Using Small Fusion Devices (21st IAEA TM RUSFD). The International Advisory Committees of the 15th Latin American Workshop on Plasma Physics (LAWPP 2014) and the 21st IAEA TM on Research Using Small Fusion Devices (RUSFD), agreed to carry out together this Joint LAWPP 2014 - 21st RUSFD in San José, Costa Rica, on 27-31 January 2014. The Joint LAWPP 2014 - 21st RUSFD meeting, organized by the Instituto Tecnológico de Costa Rica, Universidad Nacional de Costa Rica, and Ad Astra Rocket Company in collaboration with the International Atomic Energy Agency (IAEA). The Latin American Workshop on Plasma Physics (LAWPP) is a series of events which has been held periodically since 1982, with the purpose of providing a forum in which the research of the Latin American plasma physics community can be displayed, as well as fostering collaborations among plasma scientists within the region and with researchers from the rest of the world. Recognized plasma scientists from developed countries are specially invited to the meeting to present the state of the art on several "hot" topics related to plasma physics. It is an open meeting, with an International Advisory Committee, in which the working language is English. It was firstly held in 1982 in Cambuquira, Brazil, followed by workshops in Medellín, Colombia (1985), Santiago de Chile, Chile (1988), Buenos Aires, Argentina (1990), Mexico City, Mexico (1992), Foz do Iguaçu, Brazil (1994, combined with the International Congress on Plasma Physics (ICPP)), Caracas, Venezuela (1997), Tandil, Argentina (1998), La Serena, Chile (2000), Sao Pedro, Brazil (2003), Mexico City, Mexico (2005), Caracas, Venezuela (2007), Santiago de Chile, Chile (2010, combined with the ICPP) and Mar de Plata, Argentina (2011). The 21st IAEA TM on Research Using Small Fusion Devices is an ideal forum for small laboratory size fusion experiments, as compared to those of the larger laboratories, to report about their latest achievements working with medium size and small scale tokamaks, stellarators, compact tori, dense plasma focus, reversed field pinches, helical devices, linear machines, and other small plasma devices. The Technical Meeting aims at stimulating new synergies which can contribute to better streamline the research outputs to the mainstream fusion research. Previous meetings in the series were held in Budapest, Hungary (1985), Nagoya, Japan (1986), Nice, France (1988), Washington DC, USA (1990), Hefei, China (1991), Wuerzburg, Germany (1992), Campinas, Brazil (1993), Madrid, Spain (1994), Ahmedabad, India (1995), Prague, Czech Republic (1996), Cairo, Egypt (1997), Tokyo, Japan (1998) in Chengdu, China (1999), São Paulo, Brazil (2002), Vienna, Austria (2003) in Mexico City, Mexico (2005), Lisbon, Portugal (2007), in Alushta, Ukraine (2008), Kurchatov, Kazakhstan (2009) and Vienna, Austria (2011). The 1st Costa Rican Summer School on Plasma Physics was held a week before the Joint LAWPP 2014 - 21st IAEA TM RUSFD, and the 2nd Latin American Workshop on Industrial Applications of Plasma Technology (AITP) was organized in parallel with the it. The objective of the AITP Workshop is to enhance the regional academic and industrial cooperation in the field of plasma assisted surface technology. The Joint LAWPP 2014 - 21st IAEA TM RUSFD was held at the Crowne Plaza Corobici Hotel in San José from 27 to 31 January 2014. The LAWPP scientific programme, which was spread along the whole week, had 15 invited speakers, 126 participants from 20 countries around the world. It included 7 plenary talks, 8 invited talks and 12 oral contributed papers were chosen out of 92 submissions. 82 contributions in 25 topics were presented in poster sessions on Monday 27, Tuesday 28 and Thursday 30 January 2014. The 21st IAEA TM RUSFD was held along the LAWPP 2014 from 27 to 29 January 2014 and was attended by 37 participants formally registered with the IAEA, who joined the LAWPP 2014 participants. Its separate scientific programme had two plenary talks, 12 oral presentations and 14 papers presented in poster sessions on Monday 27 and Tuesday 28 January 2014. The 2nd Workshop on Industrial Applications of Plasma Technology (2nd AITP) was held on 30 and 31 January 2014, had six invited speakers, which included 2 plenary talks, 4 invited talks, 11 oral presentations and 31 contributions in a single poster session on Thursday 30 January, 2014. Its proceedings have been merged with those of the joint meeting. Finally the 1st Costa Rican Summer School on Plasma Physics, held in Santa Clara, San Carlos on 20-24 January 2014, in the week previous to the meetings, had 80 participants, 40 international conferences on different plasma physics topics, and 12 professors. The topics included in the programme of the Joint LAWPP 2014 - 21st IAEA TM RUSFD were: space plasmas, dusty plasmas, nuclear fusion, nonthermal plasmas, plasma space propulsion, basic plasma processes, plasma simulation, and industrial plasma applications among others. We are very grateful to the sponsors of the meetings: the Instituto Tecnológico de Costa Rica, the International Atomic Energy Agency (IAEA), the Universidad Nacional de Costa Rica, and Ad Astra Rocket Company. We also want to thank our exhibitors and contributors: INTERCOVAMEX, Nuclear & Plasma Sciences Society, and the IEEE Costa Rica Chapter. The publication of the proceedings was fully supported by the International Atomic Energy Agency (IAEA). The support of the International Advisory and the Local Organizing Committees, is also acknowledged in a heartfelt way. Finally, the Editors of this special issue are grateful to José Asenjo for his excellent work and cooperation for the preparation of the proceedings. Iván Vargas-Blanco and J. Julio E. Herrera-Velázquez Editors of the proceedings

Asian/Pacific Joint Production Programme of Materials for Neo-Literates in Rural Areas Planning Meeting (Tokyo, Japan, March 4-5, 1991). Report.

ERIC Educational Resources Information Center

Asian Cultural Centre for UNESCO, Tokyo (Japan).

This document reports on the 1991 Planning Meeting on Asian/Pacific Joint Production (AJP) Program of Materials for Neo-Literates in Rural Areas, the purpose of which was to discuss Asian Cultural Center for Unesco (ACCU) literacy programs to be carried out under regional cooperation. Opening addresses focused on the success of the cooperative…

The European Union Joint Procurement Agreement for cross-border health threats: what is the potential for this new mechanism of health system collaboration?

PubMed

Azzopardi-Muscat, Natasha; Schroder-Bäck, Peter; Brand, Helmut

2017-01-01

The Joint Procurement Agreement (JPA) is an innovative instrument for multi-country procurement of medical countermeasures against cross-border health threats. This paper aims to assess its potential performance. A literature review was conducted to identify key features of successful joint procurement programmes. Documentary analysis and a key informants' interview were carried out to analyse the European Union (EU) JPA. Ownership, equity, transparency, stable central financing, standardisation, flexibility and gradual development were identified as important prerequisites for successful establishment of multi-country joint procurement programmes in the literature while security of supply, favourable prices, reduction of operational costs and administrative burden and creation of professional expert networks were identified as desirable outcomes. The EU JPA appears to fulfil the criteria of ownership, transparency, equity, flexibility and gradual development. Standardisation is only partly fulfilled and central EU level financing is not provided. Security of supply is an important outcome for all EU Member States (MS). Price savings, reduction in administrative burden and creation of professional networks may be particularly attractive for the smaller MS. The JPA has the potential to increase health system collaboration and efficiency at EU level provided that the incentives for sustained commitment of larger MS are sufficiently attractive.

Development and review of the voluntary phase of a national BVD eradication programme in Ireland.

PubMed

Graham, D A; Lynch, M; Coughlan, S; Doherty, M L; O'Neill, R; Sammin, D; O'Flaherty, J

2014-01-18

The voluntary phase of an industry-led national Bovine Viral Diarrhoea (BVD) eradication programme began in Ireland on January 1, 2012 with the goal of progressing to a compulsory programme in 2013. The development and implementation of the programme in 2012 was informed by a review of current and prior eradication programmes elsewhere in Europe and extensive stakeholder consultation. The programme was based on tissue tag testing of newborn calves in participating herds, with the status of the mothers of calves with positive or inconclusive results requiring clarification. Participating herd owners were required to comply with a series of guidelines, including not selling cattle suspected of being persistently infected. For herds compliant with the guidelines, the results from 2012 counted as one of three years of tag testing anticipated in the compulsory phase of the programme. Testing was carried out in laboratories designated for this purpose by the cross-industry BVD Implementation Group that oversees the programme. Results were reported to a central database managed by the Irish Cattle Breeding Federation, and the majority of results were reported to farmers' mobile telephones by SMS message. A detailed review of the programme was conducted, encompassing the period between January 1, 2012 and July 15, 2012, based on results from approximately 500,000 calves. This paper describes the establishment and structure of the programme, and the outcomes of the review, including findings at herd and animal level.

A Reference Model for Sustainable E-Learning Service Systems: Experiences with the Joint University/Teradata Consortium

ERIC Educational Resources Information Center

Demirkan, Haluk; Goul, Michael; Gros, Mary

2010-01-01

Many e-learning service systems fail. This is particularly true for those sponsored by joint industry/university consortia where substantial economic investments are required up-front. This article provides an industry/university consortia reference model validated through experiences with the 8-year-old Teradata University Network. The reference…

The South Pacific Forestry Development Programme

Treesearch

Tang Hon Tat

1992-01-01

Only a few countries in the South Pacific are large enough for industrial forestry to be a key component of the national economy, but forests provide benefits to many people. The United Nations FA0 South Pacific Forestry Development Programme was established in April 1988, at Port Vila, Vanuatu, with a $385,000 budget, and 14 nations participating. The Programme's...

Content and Language Integrated Learning Next in Asia: Evidence of Learners' Achievement in CLIL Education from a Taiwan Tertiary Degree Programme

ERIC Educational Resources Information Center

Yang, Wenhsien

2015-01-01

This study investigates learners' performance in a Taiwanese tertiary content and language integrated learning (CLIL) programme. Learners' English proficiency was measured immediately after entering the programme and before their industrial placement, i.e. after two years. As in previously reported cases, the learners showed a significant…

Health promotion programme in the private workplaces in Singapore: a prevalence survey.

PubMed

Chew, L; Cheah, C; Koh, Y H

2002-01-01

A postal survey was conducted in 4,479 private companies with at least 50 employees in 1998 to determine the prevalence and the scope of workplace health promotion programme in these companies in Singapore. The self-administered questionnaire mailed to the study population covered five areas viz, organisational details, workplace health policies, health promotion and related activities, workplace health facilities and the source of assistance for the programme. The overall response was 49.5%. Parkinson's definition of workplace health promotion was used in the analysis to determine the prevalence of the programme. The data was collated on DBase IV and analysed using SPSS computer programmes. About one third of the respondents covering an estimated 26% of the private sector workforce had a comprehensive workplace health promotion programme as defined by Parkinson. This prevalence was a function of workforce size and industry type. Workplaces with larger workforce size (p<0.001) and those from the manufacturing and human/health service sectors (p<0.001) were more likely to have such programmes compared to their smaller counterparts and other industries respectively. The management remained the main driver behind these programmes. Many of the programmes were centred around health promoting policies and facilities with emphasis on occupational healthl safety and smoking issues. A significant proportion of workplaces surveyed had in place a comprehensive workplace health promotion programme. However, more could still be done to encourage its uptake such as training for facilitators, consultation, grant provision etc. Small workplaces remained an untapped market for such programmes.

Programmable Logic Controllers for Research on the Cyber Security of Industrial Power Plants

DTIC Science & Technology

2017-02-12

group . 15. SUBJECT TERMS Industrial control systems, cyber security 16. SECURITY CLASSIFICATION OF: 17. LIMITATION OF a. REPORT b. ABSTRACT c. THIS...currently valid OMB control number. PLEASE DO NOT RETURN YOUR FORM TO THE ABOVE ADDRESS. 1. REPORT DATE (00-MM-YYYY) ,2. REPORT TYPE 3. DATES COVERED...From- To) 12/02/2017 Final 15 August 2015 - 12 February 2017 4. TITLE AND SUBTITLE Sa. CONTRACT NUMBER Programmable Logic Controllers for Research

The Graduate School of Climate Sciences, University of Bern

NASA Astrophysics Data System (ADS)

Martin, L.

2012-04-01

The Graduate School of Climate Sciences, University of Bern, offers a specialised M.Sc. and a Ph.D. study programme in climate sciences. The graduate school has a highly interdisciplinary profile involving not only natural sciences, but also humanities/history, economics and law. The ten participating institutes with a total of 45 academics provide expertise in long-term climate variability, climate modelling, climate reconstruction, predictability of the future climate and extreme events, the impact of climate change on ecosystems and climate risks for society and economy. The graduate school is fully compliant with the Bologna Accords and collaborates closely with the sister institution C2SM at ETH Zurich by, e.g., jointly organised lectures. There are currently 23 master and 37 doctoral students in the programme. These originate from the University of Bern (28 %), from other Swiss universities (30 %) and from foreign universities (42 %). Comprehensive information about the Graduate School of Climate Sciences is available at http://www.climatestudies.unibe.ch . The M.Sc. in Climate Sciences programme (120 ECTS credits) is designed to attract students from all disciplines in natural sciences and offers them a tailor-made curriculum to reach their career aspirations. The students make their own course selection according to their profile envisaged (specialised versus broad education) and ideally already guided by a job perspective. Selecting the courses and the topic of the master thesis they specialise in one of five fields: climate and earth system science; atmospheric science; economics; economic, social and environmental history; statistics. Several courses are organised jointly with public authorities and the private industry, e.g. from experts working in the insurance business, in weather forecasting or in environmental pollution control. This provides the students hands-on experience and contacts to future employers. The master thesis (60 ECTS) involves the students in an ongoing research project and gives them the opportunity to collaborate with experienced scientists in a team. Alternatively, a short thesis (30 ECTS) may be combined with an internship (30 ECTS) at another university, in the private sector or in the administration. A bachelor degree in any field of science at university level (B.A. for specialisation in economics or history) or an equivalent degree is required for admission to the M.Sc. programme. The teaching language is English. The Ph.D. in Climate Sciences is research oriented and consists mainly of 3 to 4 years full time work in a project within one of the institutes involved in the Graduate School of Climate Sciences. The Ph.D. programme is research oriented and has a compulsory module of 12 ECTS credits containing workshops (professional skills), a summer school, an international conference, colloquia, seminars and optionally lectures. The compulsory module gives the Ph.D. students the opportunity to build up their own network in the local and international research community. The Ph.D. thesis is usually written in the form of research articles in international peer reviewed journals. A M.Sc. or an equivalent academic degree is conditional for admission to the Ph.D. programme.

Global engineering teams - a programme promoting teamwork in engineering design and manufacturing

NASA Astrophysics Data System (ADS)

Oladiran, M. T.; Uziak, J.; Eisenberg, M.; Scheffer, C.

2011-05-01

Engineering graduates are expected to possess various competencies categorised into hard and soft skills. The hard skills are acquired through specific coursework, but the soft skills are often treated perfunctorily. Global Engineering Teams (GET) is a programme that promotes project-oriented tasks in virtual student teams working in collaboration with industry partners. Teamwork is a major success factor for GET as students always work in groups of varying sizes. A questionnaire-based survey of the 2008 cohort of GET students was conducted to assess teamwork, communication and conflict resolution among group members. The results confirmed that deliverables are readily achieved in teams and communication was open. A challenge of using virtual teams is the availability of high-speed Internet access. The GET programme shows that it is possible to deliver engineering design and manufacturing via industry/university collaboration. The programme also facilitates multidisciplinary teamwork at an international level.

Aeroacoustics research in Europe: The CEAS-ASC report on 2012 highlights

NASA Astrophysics Data System (ADS)

Bodén, H.; Efraimsson, G.

2013-12-01

The Council of European Aerospace Societies (CEAS) Aeroacoustics Specialists Committee (ASC) supports and promotes the interests of the scientific and industrial aeroacoustics community on an European scale and European aeronautics activities internationally. In this context, "aeroacoustics" encompasses all aerospace acoustics and related areas. Each year the committee highlights some of the research and development projects in Europe. This paper is a report on highlights of aeroacoustics research in Europe in 2012, compiled from information provided to the ASC of the CEAS. During 2012, a number of research programmes involving aeroacoustics were funded by the European Commission. Some of the highlights from these programmes are summarized in this paper, as well as highlights from other programmes funded by national programmes or by industry. Enquiries concerning all contributions should be addressed to the authors who are given at the end of each subsection.

The Choices programme: a simple, front-of-pack stamp making healthy choices easy.

PubMed

Dötsch-Klerk, Mariska; Jansen, Léon

2008-01-01

Some food products fit better within a healthy diet than others, but how can consumers tell? The Choices programme is a simple and internationally-applicable programme to help consumers make a healthy choice on food and beverages and to stimulate industry towards healthy product innovation in all food groups. The essence of the programme is a front-of-pack stamp on products that pass an evaluation against scientific criteria. To that end generic criteria have been established for levels of saturated fat, trans fat, sugars and sodium, which are based on international dietary guidelines (FAO/WHO). For some food categories there are specific criteria for these nutrients as well as for dietary fibre and calories. In this way the criteria are challenging without being impossible to meet. The programme has been initiated by food industry and is open to all companies in food industry, retail and catering. The approach is also supported by nutritional scientists, governments and NGOs. An independent scientific committee is responsible for designing and periodically reviewing the qualifying criteria. The current qualifying criteria were developed by scientific committees in the Netherlands and Belgium. These criteria will now be reviewed by an International Scientific Committee, consisting of internationally-recognised food and nutrition experts. To accommodate the developments in nutrition science and food technology, this review will take place every two years.

Joint Ventures: A New Agenda for Education.

ERIC Educational Resources Information Center

Griffin, Dean

1989-01-01

The author states that vocational education can join in partnerships with industry, labor, and government to contribute to economic development. Examples of current programs are included. The "joint venture" concept is explained and ideas for forming joint ventures are shared. (CH)

EBCOG Hospital Recognition: where do we stand?

PubMed Central

Wladimiroff, J.; Hornnes, P.

2010-01-01

Hospital Recognition for general Ob/Gyn training programmes was started by EBCOG (European Board & College of Obstetrics & Gynaecology) in 1996 and for subspecialty Ob/Gyn training programmes in 2005, the latter jointly with the four European scientific organisations representing the subspecialties. So far, 85 Audits/Visits have been conducted by EBCOG for general Ob/Gyn training and a good start has been made for subspecialty training, in particular Gynaecological Oncology. EBCOG Visits are conducted by two EBCOG representatives and one trainee appointed by ENTOG (European Network for Trainees in Obstetrics & Gynaecology) for general Ob/Gyn training programmes and by two subspecialty specialists and an EBCOG representative for subspecialty programmes. Each Visit lasts one day. Accredition is granted by the EBCOG Executive Board depending on the Visiting report. Ultimately, EBCOG would like to see the introduction of an auditing and accreditation system for general and subspecialty Ob/Gyn training programmes in each country in Europe PMID:25206968

78 FR 65733 - Joint Industry Plan; Notice of Filing and Immediate Effectiveness of Amendment to the Plan for...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-11-01

... SECURITIES AND EXCHANGE COMMISSION [Release No. 34-70764; File No. 4-443] Joint Industry Plan; Notice of Filing and Immediate Effectiveness of Amendment to the Plan for the Purpose of Developing and Implementing Procedures Designed To Facilitate the Listing and Trading of Standardized Options To Add Miami International Securities Exchange, LLC (...

78 FR 54305 - Joint Industry Plan; Notice of Filing of the Fifth Amendment to the National Market System Plan...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-09-03

... SECURITIES AND EXCHANGE COMMISSION [Release No. 34-70274; File No. 4-631] Joint Industry Plan; Notice of Filing of the Fifth Amendment to the National Market System Plan To Address Extraordinary Market Volatility by BATS Exchange, Inc., BATS Y-Exchange, Inc., Chicago Board Options Exchange, Incorporated, Chicago Stock Exchange, Inc., EDGA...

78 FR 54321 - Joint Industry Plan; Notice of Filing and Immediate Effectiveness of the Fourth Amendment to the...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-09-03

... SECURITIES AND EXCHANGE COMMISSION [Release No. 34-70273; File No. 4-631] Joint Industry Plan; Notice of Filing and Immediate Effectiveness of the Fourth Amendment to the National Market System Plan To Address Extraordinary Market Volatility by BATS Exchange, Inc., BATS Y- Exchange, Inc., Chicago Board Options Exchange, Incorporated, Chicago...

78 FR 13113 - Joint Industry Plan; Notice of Filing and Immediate Effectiveness of the Second Amendment to the...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-02-26

... SECURITIES AND EXCHANGE COMMISSION [Release No. 34-68953; File No. 4-631] Joint Industry Plan; Notice of Filing and Immediate Effectiveness of the Second Amendment to the National Market System Plan To Address Extraordinary Market Volatility by BATS Exchange, Inc., BATS Y- Exchange, Inc., Chicago Board Options Exchange, Incorporated, Chicago...

Tritium technology development in EEC laboratories contributions to design goals for NET

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dinner, P.; Chazalon, M.; Leger, D.

1988-09-01

An overview is given of the tritium technology activities carried out in the European national laboratories associated with the European Fusion Programme and in the European Joint Research Center. The relationship of these activities to the Next European Torus (NET) design priorities is discussed, and the current status of the research is summarised. Future developments, required for NET, which will be addressed in the definition of the next 5-year programme are also presented.

Wine biotechnology in South Africa: towards a systems approach to wine science.

PubMed

Moore, John P; Divol, Benoit; Young, Philip R; Nieuwoudt, Hélène H; Ramburan, Viresh; du Toit, Maret; Bauer, Florian F; Vivier, Melané A

2008-11-01

The wine industry in South Africa is over three centuries old and over the last decade has reemerged as a significant competitor in world wine markets. The Institute for Wine Biotechnology (IWBT) was established in partnership with the Department of Viticulture and Oenology at Stellenbosch University to foster basic fundamental research in the wine sciences leading to applications in the broader wine and grapevine industries. This review focuses on the different research programmes of the Institute (grapevine, yeast and bacteria biotechnology programmes, and chemical-analytical research), commercialisation activities (SunBio) and new initiatives to integrate the various research disciplines. An important focus of future research is the Wine Science Research Niche Area programme, which connects the different research thrusts of the IWBT and of several research partners in viticulture, oenology, food science and chemistry. This 'Functional Wine-omics' programme uses a systems biology approach to wine-related organisms. The data generated within the programme will be integrated with other data sets from viticulture, oenology, analytical chemistry and the sensory sciences through chemometrics and other statistical tools. The aim of the programme is to model aspects of the wine making process, from the vineyard to the finished product.

Impact of online education on intern behaviour around joint commission national patient safety goals: a randomised trial.

PubMed

Shaw, Tim J; Pernar, Luise I; Peyre, Sarah E; Helfrick, John F; Vogelgesang, Kaitlin R; Graydon-Baker, Erin; Chretien, Yves; Brown, Elizabeth J; Nicholson, James C; Heit, Jeremy J; Co, John Patrick T; Gandhi, Tejal

2012-10-01

To compare the effectiveness of two types of online learning methodologies for improving the patient-safety behaviours mandated in the Joint Commission National Patient Safety Goals (NPSG). This randomised controlled trial was conducted in 2010 at Massachusetts General Hospital and Brigham and Women's Hospital (BWH) in Boston USA. Incoming interns were randomised to either receive an online Spaced Education (SE) programme consisting of cases and questions that reinforce over time, or a programme consisting of an online slide show followed by a quiz (SQ). The outcome measures included NPSG-knowledge improvement, NPSG-compliant behaviours in a simulation scenario, self-reported confidence in safety and quality, programme acceptability and programme relevance. Both online learning programmes improved knowledge retention. On four out of seven survey items measuring satisfaction and self-reported confidence, the proportion of SE interns responding positively was significantly higher (p<0.05) than the fraction of SQ interns. SE interns demonstrated a mean 4.79 (36.6%) NPSG-compliant behaviours (out of 13 total), while SQ interns completed a mean 4.17 (32.0%) (p=0.09). Among those in surgical fields, SE interns demonstrated a mean 5.67 (43.6%) NPSG-compliant behaviours, while SQ interns completed a mean 2.33 (17.9%) (p=0.015). Focus group data indicates that SE was more contextually relevant than SQ, and significantly more engaging. While both online methodologies improved knowledge surrounding the NPSG, SE was more contextually relevant to trainees and was engaging. SE impacted more significantly on both self-reported confidence and the behaviour of surgical residents in a simulated scenario.

Biomedical engineering education through global engineering teams.

PubMed

Scheffer, C; Blanckenberg, M; Garth-Davis, B; Eisenberg, M

2012-01-01

Most industrial projects require a team of engineers from a variety of disciplines. The team members are often culturally diverse and geographically dispersed. Many students do not acquire sufficient skills from typical university courses to function efficiently in such an environment. The Global Engineering Teams (GET) programme was designed to prepare students such a scenario in industry. This paper discusses five biomedical engineering themed projects completed by GET students. The benefits and success of the programme in educating students in the field of biomedical engineering are discussed.

Building Transatlantic Partnerships in Space Exploration The MPCV-SM Study

NASA Technical Reports Server (NTRS)

Wilde Detlef; Schubert, Kathy; Grantier, Julie; Deloo, Philippe; Price, Larry; Fenoglio, Franco; Chavy, Siegfrid

2012-01-01

Following the approval of the ESA ISS Exploitation Declaration for the ISS lifetime at the ESA Council Meeting in March 2011, ESA decided to partially offset the European obligations deriving from the extension of the ISS Programme until end 2020 with different means than ATVs, following the ATV-5 mission foreseen in mid 2014. The envisioned approach is based on a barter element(s) that would generate cost avoidance on the NASA side. NASA and ESA considered a number of Barter options, and concluded that the provision by ESA of the Service Module for the NASA Multi-Purpose Crew Vehicle (MPCV) was the barter with the most interest. A joint ESA - NASA working group was established to assess the feasibility of Europe developing this Module based on ATV heritage. The working group was supported by European and US industry namely Astrium, TAS-I and Lockheed-Martin. This paper gives an overview of the results of the on-going study as well as its perspective utilisation for the global space exploration endeavour.

JPL Space Telecommunications Radio System Operating Environment

NASA Technical Reports Server (NTRS)

Lux, James P.; Lang, Minh; Peters, Kenneth J.; Taylor, Gregory H.; Duncan, Courtney B.; Orozco, David S.; Stern, Ryan A.; Ahten, Earl R.; Girard, Mike

2013-01-01

A flight-qualified implementation of a Software Defined Radio (SDR) Operating Environment for the JPL-SDR built for the CoNNeCT Project has been developed. It is compliant with the NASA Space Telecommunications Radio System (STRS) Architecture Standard, and provides the software infrastructure for STRS compliant waveform applications. This software provides a standards-compliant abstracted view of the JPL-SDR hardware platform. It uses industry standard POSIX interfaces for most functions, as well as exposing the STRS API (Application Programming In terface) required by the standard. This software includes a standardized interface for IP components instantiated within a Xilinx FPGA (Field Programmable Gate Array). The software provides a standardized abstracted interface to platform resources such as data converters, file system, etc., which can be used by STRS standards conformant waveform applications. It provides a generic SDR operating environment with a much smaller resource footprint than similar products such as SCA (Software Communications Architecture) compliant implementations, or the DoD Joint Tactical Radio Systems (JTRS).

Developing a new industrial engineering curriculum using a systems engineering approach

NASA Astrophysics Data System (ADS)

Buyurgan, Nebil; Kiassat, Corey

2017-11-01

This paper reports on the development of an engineering curriculum for a new industrial engineering programme at a medium-sized private university in the northeast United States. A systems engineering process has been followed to design and develop the new curriculum. Considering the programme curriculum as a system, first the stakeholders have been identified, and some preliminary analysis on their needs and requirements has been conducted. Following that, the phases of conceptual design, preliminary design, and detailed design have been pursued during which different levels of validation, assessment, and evaluation processes have been utilised. In addition, a curriculum assessment and continuous improvement process have been developed to assess the curriculum and the courses frequently. The resulting curriculum is flexible, allowing the pursuit of accelerated graduate programmes, a second major, various minor options, and study-abroad; relevant, tailored to the needs of industry partners in the vicinity; and practical, providing hands-on education, resulting in employment-ready graduates.

78 FR 65739 - Joint Industry Plan; Notice of Filing and Immediate Effectiveness of Amendment to the Plan for...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-11-01

... SECURITIES AND EXCHANGE COMMISSION [Release No. 34-70765; File No. 4-443] Joint Industry Plan; Notice of Filing and Immediate Effectiveness of Amendment to the Plan for the Purpose of Developing and Implementing Procedures Designed To Facilitate the Listing and Trading of Standardized Options To Add Topaz Exchange, LLC as a Plan Sponsor October...

A research experiment on facilitation and formation of joint research and development programs between government, industry, and universities: Overview, preliminary findings, and observations

NASA Technical Reports Server (NTRS)

Shariq, Syed Z.

1992-01-01

Presented is an overview of an experiment to explore the free-market approach to public-private collaboration through the development and implementation of a joint venture mechanism to enable formation of R&D projects between government, industry and academia. Some preliminary results related to time-to-commercialization and economic competitiveness are discussed.

Industrial Control System Process-Oriented Intrusion Detection (iPoid) Algorithm

DTIC Science & Technology

2016-08-01

inspection rules using an intrusion-detection system (IDS) sensor, a simulated Programmable Logic Controller (PLC), and a Modbus client operating...operating system PLC Programmable Logic Controller SCADA supervisory control and data acquisition SIGHUP signal hangup SPAN Switched Port Analyzer

Summary of JIP

DOT National Transportation Integrated Search

2008-04-01

The SCRIM (Steel Catenary Riser Integrity Management) Joint Industry Project was an industry-sponsored initiative, managed and delivered by MCS, to develop industry guidelines for the integrity management of offshore risers. The original scope of the...

Science Education and Public Outreach in Asia - experiences in ACCENT

NASA Astrophysics Data System (ADS)

Schuepbach, E.

2006-12-01

ACCENT is the European Network of Excellence in Atmospheric Composition Change (www.accent- network.org). Its Task Training and Education aims at disseminating ACCENT results to a variety of target groups, including emerging countries. Until now, fellowships have been offered for early-career scientists to participate in European science training events. A teacher training workshop has concentrated on cross- cultural aspects of PhD supervision. The involvement of new Associated Partners from Asia has triggered reflections on science education and outreach to politicians and the public in this part of the world. Joint educational and outreach programmes and products are currently developed with China and Mongolia for training activities scheduled in autumn 2006 and autumn 2007. First experiences in joint science education programmes for early-career scientists will be presented, and the challenges associated with communicating science to non-scientists in Asia will be discussed.

Tobacco control advocates must demand high-quality media campaigns: the California experience.

PubMed

Balbach, E D; Glantz, S A

1998-01-01

To document efforts on the part of public officials in California to soften the media campaign's attack on the tobacco industry and to analyse strategies to counter those efforts on the part of tobacco control advocates. Data were gathered from interviews with programme participants, direct observation, written materials, and media stories. In addition, internal documents were released by the state's Department of Health Services in response to requests made under the California Public Records Act by Americans for Nonsmokers' Rights. Finally, a draft of the paper was circulated to 11 key players for their comments. In 1988 california voters enacted Proposition 99, an initiative that raised the tobacco tax by $0.25 and allocated 20% of the revenues to anti-tobacco education. A media campaign, which was part of the education programme, directly attacked the tobacco industry, exposing the media campaign to politically based efforts to shut it down or soften it. Through use of outsider strategies such as advertising, press conferences, and public meetings, programme advocates were able to counter the efforts to soften the campaign. Anti-tobacco media campaigns that expose industry manipulation are a key component of an effective tobacco control programme. The effectiveness of these campaigns, however, makes them a target for elimination by the tobacco industry. The experience from California demonstrates the need for continuing, aggressive intervention by nongovernmental organisations in order to maintain the quality of anti-tobacco media campaigns.

How to establish and sustain a joint venture in China.

PubMed

Lee, Paul

2008-01-01

Joint ventures with Chinese companies provide one of the most effective ways for international companies to establish a foothold in the booming Chinese economy. The benefits, opportunities and challenges of establishing a joint venture are explored here. Current partnering trends and successful Sino-foreign joint ventures in the fast-growing medical device industry in China are also highlighted.

Ball-joint grounding ring

NASA Technical Reports Server (NTRS)

Aperlo, P. J. A.; Buck, P. A.; Weldon, V. A.

1981-01-01

In ball and socket joint where electrical insulator such as polytetrafluoroethylene is used as line to minimize friction, good electrical contact across joint may be needed for lightning protection or to prevent static-charge build-up. Electrical contact is maintained by ring of spring-loaded fingers mounted in socket. It may be useful in industry for cranes, trailers, and other applications requiring ball and socket joint.

75 FR 33613 - Notice of the Carbon Sequestration-Geothermal Energy-Science Joint Workshop

Federal Register 2010, 2011, 2012, 2013, 2014

2010-06-14

... Sequestration--Geothermal Energy--Science Joint Workshop AGENCY: Office of Energy Efficiency and Renewable Energy, DOE. ACTION: Notice of the Carbon Sequestration--Geothermal Energy--Science Joint Workshop... Carbon Storage and Geothermal Energy, June 15-16, 2010. Experts from industry, academia, national labs...

Best practice workplace HIV/AIDS programmes in South Africa: A review of case studies and lessons learned

PubMed Central

2009-01-01

ABSTRACT Background A group of experts attending a tripartite interregional meeting on best practices in HIV/AIDS workplace policies and programmes organised by the International Labour Organisation (ILO) in Geneva, Switzerland, identified 34 best practice workplace HIV programmes from across the world. Method The ten criteria that were used for reviewing best practice workplace HIV/AIDS programmes in South Africa include acceptability, accessibility, ethical soundness, perceived impact, relevance, appropriateness, innovativeness, efficiency, sustainability and replicability. Results More than one-third (35.3%) of the 34 best practice workplace interventions identified were found in businesses and industries in South Africa. This constitutes a significant and encouraging effort to deal with HIV/AIDS in the workplace. Approximately 16.7% of the best practice workplace HIV/AIDS interventions focused on policy and legal frameworks, 50% of these interventions focused on prevention, 16.7% provided links beyond the workplace and a further 16.7% were interventions that focused on knowledge and evidence. A third (33.3%) of practices were found in the mining industry, 16.7% in the motor industry, 16.7% from workers’ unions, and the rest (33.3%) were found in a sugar company, an electricity supply company, a pharmaceutical company and the ministry of Public Service and Administration. Conclusion It is encouraging that over one-third of all best practice workplace HIV interventions identified by the ILO experts were found in South Africa. The majority of these policies and programmes were focused on HIV prevention.

A modular success story the Saudi petrochemical project

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kirven, J.B.; Swenson, C.R.

1986-01-01

The Saudi Petrochemical Company is referred to within this paper as ''Sadaf''. Sadaf is the phonetic spelling of the Arabic word for seashell and is a joint venture of Saudi Basic Industries Corporation (SABIC) and Pecten Arabian Ltd., an affiliate of Shell Oil Comapny, U.S.A. SABIC is a joint stock corporation responsible for the development of basic industries in the Kingdom in the petrochemicals, metals and fertilizers field.

Customer focus in breast cancer screening services.

PubMed

Buttimer, Andreas

2009-01-01

The purpose of the paper is to demonstrate how a generic value chain and customer focused system as demonstrated by the Scottish and Irish breast screening programmes can be used to provide a high quality health service. Literature relevant to aligning the entire operating model--the companies' culture, business processes, management systems to serve one value discipline, i.e. customer intimacy, is reviewed and considered in the context of the NHS Scottish Breast Screening Programme in Edinburgh and BreastCheck--the National Breast Screening Programme in Ireland. This paper demonstrates how an emphasis on customer focus and operational excellence, as used in other service industries, can help to provide a better health service. It uses the Scottish and Irish breast screening programmes as illustrative examples. The paper applies the key requirements in the delivery of a quality service including an understanding of the characteristics of a service industry, the management of discontinuities involved in its delivery and the environment in which it operates. System failure is commonly the cause of quality failure in the health system. Breast screening programmes are designed to prevent such a failure. This paper promotes and describes the use of the generic value chain by using the knowledge gained in delivering a mammography-screening programme.

The Artificial Intelligence Applications to Learning Programme.

ERIC Educational Resources Information Center

Williams, Noel

1992-01-01

Explains the Artificial Intelligence Applications to Learning Programme, which was developed in the United Kingdom to explore and accelerate the use of artificial intelligence (AI) technologies in learning in both the educational and industrial sectors. Highlights include program evaluation, marketing, ownership of information, consortia, and cost…

Identifying, Quantifying, Extracting and Enhancing Implicit Parallelism

ERIC Educational Resources Information Center

Agarwal, Mayank

2009-01-01

The shift of the microprocessor industry towards multicore architectures has placed a huge burden on the programmers by requiring explicit parallelization for performance. Implicit Parallelization is an alternative that could ease the burden on programmers by parallelizing applications "under the covers" while maintaining sequential semantics…

HP-25 PROGRAMMABLE POCKET CALCULATOR APPLIED TO AIR POLLUTION MEASUREMENT STUDIES: STATIONARY SOURCES

EPA Science Inventory

The report should be useful to persons concerned with Air Pollution Measurement Studies of Stationary Industrial Sources. It gives detailed descriptions of 22 separate programs, written specifically for the Hewlett Packard Model HP-25 manually programmable pocket calculator. Each...

HP-65 PROGRAMMABLE POCKET CALCULATOR APPLIED TO AIR POLLUTION MEASUREMENT STUDIES: STATIONARY SOURCES

EPA Science Inventory

The handbook is intended for persons concerned with air pollution measurement studies of stationary industrial sources. It gives detailed descriptions of 22 different programs written specifically for the Hewlett Packard Model HP-65 card-programmable pocket calculator. For each p...

Evaluation of the COMETT Programme.

ERIC Educational Resources Information Center

Thompson, Quentin; Ambler, Mark

1990-01-01

The evaluation report of the European Community Action Programme for Education and Training for Technology (COMETT) examines COMETT program content, COMETT projects, and initial program impact. It was concluded that COMETT has alerted the educational sector and industry to benefits of cooperative training but that transnational cooperative…

Examining the policy climate for HIV prevention in the Caribbean tourism sector: a qualitative study of policy makers in the Dominican Republic.

PubMed

Padilla, Mark B; Reyes, Armando Matiz; Connolly, Maureen; Natsui, Shaw; Puello, Adrian; Chapman, Helena

2012-05-01

The Caribbean has the highest prevalence rates of HIV/AIDS outside sub-Saharan Africa, and a broad literature suggests an ecological association between tourism areas and sexual vulnerability. Tourism employees have been shown to engage in high rates of sexual risk behaviours. Nevertheless, no large-scale or sustained HIV prevention interventions have been conducted within the tourism industry. Policy barriers and resources are under-studied. In order to identify the policy barriers and resources for HIV prevention in the tourism sector, our research used a participatory approach involving a multisectoral coalition of representatives from the tourism industry, government, public health and civil society in the Dominican Republic. We conducted 39 in-depth semi-structured interviews with policy makers throughout the country focusing on: prior experiences with HIV prevention policies and programmes in the tourism sector; barriers and resources for such policies and programmes; and future priorities and recommendations. Findings suggest perceptions among policy makers of barriers related to the mobile nature of tourism employees; the lack of centralized funding; fear of the 'image problem' associated with HIV; and the lack of multisectoral policy dialogue and collaboration. Nevertheless, prior short-term experiences and changing attitudes among some private sector tourism representatives suggest emerging opportunities for policy change. We argue that the time is ripe for dialogue across the public-private divide in order to develop regulatory mechanisms, joint responsibilities and centralized funding sources to ensure a sustainable response to the HIV-tourism linkage. Policy priorities should focus on incorporating HIV prevention as a component of occupational health; reinforcing workers' health care rights as guaranteed by existing law; using private sector tourism representatives who support HIV prevention as positive role models for national campaigns; and disseminating a notion of 'investment' in safer tourism environments as a means to positively influence tourist demand.

Why is joint attention a pivotal skill in autism?

PubMed Central

Charman, Tony

2003-01-01

Joint attention abilities play a crucial role in the development of autism. Impairments in joint attention are among the earliest signs of the disorder and joint attention skills relate to outcome, both in the 'natural course' of autism and through being targeted in early intervention programmes. In the current study, concurrent and longitudinal associations between joint attention and other social communication abilities measured in a sample of infants with autism and related pervasive developmental disorders at age 20 months, and language and symptom severity at age 42 months, were examined. Extending the findings from previous studies, joint attention ability was positively associated with language gains and (lower) social and communication symptoms, and imitation ability was also positively associated with later language. Some specificity in the association between different aspects of joint attention behaviours and outcome was found: declarative, triadic gaze switching predicted language and symptom severity but imperative, dyadic eye contact behaviours did not. Further, although joint attention was associated with later social and language symptoms it was unrelated to repetitive and stereotyped symptoms, suggesting the latter may have a separate developmental trajectory. Possible deficits in psychological and neurological processes that might underlie the impaired development of joint attention in autism are discussed. PMID:12639329

Training in paediatric clinical pharmacology in the UK

PubMed Central

Choonara, Imti; Dewit, Odile; Harrop, Emily; Howarth, Sheila; Helms, Peter; Kanabar, Dipak; Lenney, Warren; Rylance, George; Vallance, Patrick

2004-01-01

Aims To produce a training programme in paediatric clinical pharmacology. Methods A working group, consisting of clinical pharmacologists (paediatric and adult), general paediatricians and the pharmaceutical industry was established to produce the training programme. Results Following a two year training programme in general paediatrics, a three year training programme in clinical pharmacology has been established. This includes one year of research in clinical pharmacology (paediatric or adult). The other two years involve training in different aspects of paediatric clinical pharmacology and general paediatrics. Conclusion The existence of a formal training programme should result in a significant increase in the number of paediatric clinical pharmacologists. PMID:15255806

An Analysis of Operational Availability of Brazilian Navy and Argentine Air Force A-4 Fleets Using Simulation Modeling

DTIC Science & Technology

1999-12-01

Escuela de Ingenieria Aeronäutica, 1982 Submitted in partial fulfillment of the requirements for the degree of MASTER OF SCD2NCE IN MANAGEMENT...defense industry , including joint production, technical data sharing, and reciprocal subcontracting in the joint development and production of a...34Foundations of Manufacturing Management". 15. Barton, Russell R., Simulation Metamodels, Department of Industrial and Manufacturing Engineering, The

Challenges of the Global Century: Report of the Project on Globalization and National Security

DTIC Science & Technology

2001-01-01

military and civilian leaders for service at the highest levels of national defense and security. The major components of NDU include the Industrial ...academic programs. In addition, it produces Joint Force Quarterly, a professional military journal published for the Chairman of the Joint Chiefs of...shocks become contagious. In these circumstances, it can both arouse anger at industrial democracies and facili- tate the growth of international crime

Tobacco control advocates must demand high-quality media campaigns: the California experience

PubMed Central

Balbach, E.; Glantz, S.

1998-01-01

OBJECTIVE—To document efforts on the part of public officials in California to soften the media campaign's attack on the tobacco industry and to analyse strategies to counter those efforts on the part of tobacco control advocates.
METHODS—Data were gathered from interviews with programme participants, direct observation, written materials, and media stories. In addition, internal documents were released by the state's Department of Health Services in response to requests made under the California Public Records Act by Americans for Nonsmokers' Rights. Finally, a draft of the paper was circulated to 11 key players for their comments.
RESULTS—In 1988 California voters enacted Proposition 99, an initiative that raised the tobacco tax by $0.25 and allocated 20% of the revenues to anti-tobacco education. A media campaign, which was part of the education programme, directly attacked the tobacco industry, exposing the media campaign to politically based efforts to shut it down or soften it. Through use of outsider strategies such as advertising, press conferences, and public meetings, programme advocates were able to counter the efforts to soften the campaign.
CONCLUSION—Anti-tobacco media campaigns that expose industry manipulation are a key component of an effective tobacco control programme. The effectiveness of these campaigns, however, makes them a target for elimination by the tobacco industry. The experience from California demonstrates the need for continuing, aggressive intervention by non-governmental organisations in order to maintain the quality of anti-tobacco media campaigns.


Keywords: media campaigns; anti-tobacco advocacy; California PMID:10093175

Defense Industrial Base Assessment: U.S. Integrated Circuit Design and Fabrication Capability

DTIC Science & Technology

2009-05-01

in the U.S for the period 2003-2006, with projections to 2011.6 The resulting draft OTE survey was field tested for accuracy and usability with a...custom application specific integrated circuits (ASICs) to field programmable gate arrays (FPGAs). Companies of all sizes can manufacture these IC...able to design one-time Electronically Programmable Gate Arrays (EPGAs) while nine are able to design Field Programmable Gate Arrays (FPGAs). Eight

A new kind of end-glued joint for the hardwood industry

Treesearch

Philip A. Araman

1973-01-01

A method has been developed for end- and edge-gluing short pieces of high-value hardwood lumber into long panels, using a curved end joint we call SEM (Serpentine End Matching). Panels containing SEM end joints are aesthetically pleasing and are suited for exposed applications such as in finished furniture.

On the Logic and Process of Collaborative Innovation in Higher Vocational Education and Industrial Development

ERIC Educational Resources Information Center

Zhibin, Tang; Weiping, Shi

2017-01-01

Modern development of vocational education requires the joint participation of multiple departments and entities, and industry-education cooperation is a basic requirement. Against the backdrop of the third industrial revolution, cultivating skilled, innovative graduates and transforming the model of industrial technical innovation requires…

The academic-industrial complex: navigating the translational and cultural divide.

PubMed

Freedman, Stephen; Mullane, Kevin

2017-07-01

In general, the fruits of academic discoveries can only be realized through joint efforts with industry. However, the poor reproducibility of much academic research has damaged credibility and jeopardized translational efforts that could benefit patients. Meanwhile, journals are rife with articles bemoaning the limited productivity and increasing costs of the biopharmaceutical industry and its resultant predilection for mergers and reorganizations while decreasing internal research efforts. The ensuing disarray and uncertainty has created tremendous opportunities for academia and industry to form even closer ties, and to embrace new operational and financial models to their joint benefit. This review article offers a personal perspective on the opportunities, models and approaches that harness the increased interface and growing interdependency between biomedical research institutes, the biopharmaceutical industry and the technological world. Copyright © 2017 Elsevier Ltd. All rights reserved.

Comparative Analysis of Master of Industrial Design Education in Turkey

ERIC Educational Resources Information Center

Erkarslan, Onder; Imamogullari, Beril

2010-01-01

This research focused on the masters degree programme in industrial design (ID), which is research and practice oriented in the light of current themes and design principles. It argued that a masters degree in industrial design would help graduates specialise in the related field and improve their skills. Therefore, institutional and academic…

Norwegian Field Research Projects in Industrial Democracy.

ERIC Educational Resources Information Center

Qvale, Thoralf Ulrik

The Industrial Democracy Programme (IDP) of Norway seeks to create conditions for a self-supporting change process in industry, rather than implementing a ready-made model, believing that it is more valuable for employees to learn to change their organization than for the specific solution to be found. The central problems, therefore, have been to…

Developing an industry-oriented safety curriculum using the Delphi technique.

PubMed

Chen, Der-Fa; Wu, Tsung-Chih; Chen, Chi-Hsiang; Chang, Shu-Hsuan; Yao, Kai-Chao; Liao, Chin-Wen

2016-09-01

In this study, we examined the development of industry-oriented safety degree curricula at a college level. Based on a review of literature on the practices and study of the development of safety curricula, we classified occupational safety and health curricula into the following three domains: safety engineering, health engineering, and safety and health management. We invited 44 safety professionals to complete a four-round survey that was designed using a modified Delphi technique. We used Chi-square statistics to test the panel experts' consensus on the significance of the items in the three domains and employed descriptive statistics to rank the participants' rating of each item. The results showed that the top three items for each of the three domains were Risk Assessment, Dangerous Machinery and Equipment, and Fire and Explosion Prevention for safety engineering; Ergonomics, Industrial Toxicology, and Health Risk Assessment for health engineering; and Industrial Safety and Health Regulations, Accident Investigation and Analysis, and Emergency Response for safety and health management. Only graduates from safety programmes who possess practical industry-oriented abilities can satisfy industry demands and provide value to the existence of college safety programmes.

A synopsis of the Joint Environment and Human Health Programme in the UK.

PubMed

Moore, Michael N; Kempton, Pamela D

2009-12-21

The Joint Environment and Human Health (E&HH) Programme has explored how both man-made and natural changes to the environment can influence human health. Scientists have tackled the complicated mix of environmental, social and economic factors that influence health, particularly focusing on naturally occurring toxins, man-made pollutants, nanoparticles and pathogens to see:* how they spread within the environment* how their properties change as they interact with other substances or organisms* how we become exposed to them, and* their impact on human health.The Programme has not only succeeded in bringing together scientists from a broad range of environmental, social and biomedical backgrounds, but also fostered new relationships with end users and policy makers. This new community is helping to provide the multidisciplinary capacity able to respond in an interdisciplinary way to resolve problems that are intrinsically interfacial in character. Many of these questions relate to complex issues such as the environmental biology and geochemistry of soils and how these influence the transport, accessibility and bioavailability of chemical pollutants and infectivity of pathogens. The dispersion of harmful particles in the atmosphere is another area of major concern where the E&HH Programme has broken new ground by showing how the chemical and physical properties of such particles influence their environmental behaviour and may govern their toxicity and resultant pathological reactions induced following inhalation. Working groups and networks have identified potential health problems concerning the transport and emergence of human pathogens associated with food, soil, air and water. The consequence(s) of global and regional climate change for the environmental behaviours of pollutants and pathogens have been considered by a number of the projects supported by the E&HH programme.The selection of articles in this supplement reflect the broad scope of the E&HH programme. By effectively identifying and interconnecting these interdisciplinary elements, the E&HH programme has fostered the emergence of new ways of solving problems in areas of research that have, until recently, had little connection with one another. This has not only helped build new research groupings, but has also led to exciting new scientific developments as described in this issue of Environmental Health.

Adult Learning for Social Justice

ERIC Educational Resources Information Center

Furlong, Cerys

2011-01-01

The "Programme for Government" is the Welsh Government's plan of action for this term of the Assembly. At the forefront of the programme is growth and sustainable jobs. As a small economy, still recovering from the decline of manufacturing and the coal industry, Wales' economic and social outcomes are inextricably linked. Certainly, the…

Introducing Programmable Logic to Undergraduate Engineering Students in a Digital Electronics Course

ERIC Educational Resources Information Center

Todorovich, E.; Marone, J. A.; Vazquez, M.

2012-01-01

Due to significant technological advances and industry requirements, many universities have introduced programmable logic and hardware description languages into undergraduate engineering curricula. This has led to a number of logistical and didactical challenges, in particular for computer science students. In this paper, the integration of some…

Creating Global Networks through an Online Engineering Graduate Programme

ERIC Educational Resources Information Center

Murray, M. H.

2011-01-01

Internationally, the railway industry is facing a severe shortage of engineers with high-level, relevant, professional and technical knowledge and abilities, in particular amongst engineers involved in the design, construction and maintenance of railway infrastructure. A unique graduate level programme has been created to meet that global need via…

How Programme Teams Progress Agricultural Innovation in the Australian Dairy Industry

ERIC Educational Resources Information Center

Nettle, Ruth; Brightling, Pauline; Hope, Anne

2013-01-01

Purpose: This article outlines the emergence of programme teams in the Australian dairy farm sector as a response to counter weaknesses in the institutional environment for agricultural innovation which favours technology adoption/diffusion approaches. Design/methodology/approach: The strengths, weaknesses and risks of different approaches to…

International treatment access and research, how you can help--interview with Dr. Peter Piot of UNAIDS. Joint United Nations Programme on HIV/AIDS. Interview by John S. James.

PubMed

Piot, P

1996-11-01

Medical advances in the United States have greatly increased the lifespan of people with AIDS, but there is no access to modern medicine for the 90 percent of AIDS patients who live in other countries. Dr. Peter Piot of the United Nations Programme on HIV/AIDS (UNAIDS) addresses the efforts of six U.N. agencies in improving treatment access throughout the world and improving research on natural and traditional medicines.

The path to fusion power†

PubMed Central

Smith, Chris Llewellyn; Cowley, Steve

2010-01-01

The promise, status and challenges of developing fusion power are outlined. The key physics and engineering principles are described and recent progress quantified. As the successful demonstration of 16 MW of fusion in 1997 in the Joint European Torus showed, fusion works. The central issue is therefore to make it work reliably and economically on the scale of a power station. We argue that to meet this challenge in 30 years we must follow the aggressive programme known as the ‘Fast Track to Fusion’. This programme is described in some detail. PMID:20123748

A modelling approach to vaccination and contraception programmes for rabies control in fox populations.

PubMed Central

Suppo, C; Naulin, J M; Langlais, M; Artois, M

2000-01-01

In a previous study, three of the authors designed a one-dimensional model to simulate the propagation of rabies within a growing fox population; the influence of various parameters on the epidemic model was studied, including oral-vaccination programmes. In this work, a two-dimensional model of a fox population having either an exponential or a logistic growth pattern was considered. Using numerical simulations, the efficiencies of two prophylactic methods (fox contraception and vaccination against rabies) were assessed, used either separately or jointly. It was concluded that far lower rates of administration are necessary to eradicate rabies, and that the undesirable side-effects of each programme disappear, when both are used together. PMID:11007334

The use of arithmetic average method in identifying critical success criteria for Homestay Programmes

NASA Astrophysics Data System (ADS)

Daud, Shahidah Md; Ramli, Razamin; Kasim, Maznah Mat; Kayat, Kalsom; Razak, Rafidah Abd

2015-12-01

Malaysian Homestay is very unique. It is classified as Community Based Tourism (CBT). Homestay Programme which is a community events where a tourist stays together with a host family for a period of time and enjoying cultural exchange besides having new experiences. Homestay programme has booming the tourism industry since there is over 100 Homestay Programme currently being registered with the Ministry of Culture and Tourism Malaysia. However, only few Homestay Programme enjoying the benefits of success Homestay Programme. Hence, this article seeks to identify the critical success factors for a Homestay Programme in Malaysia. An Arithmetic Average method is utilized to further evaluate the identified success factors in a more meaningful way. The findings will help Homestay Programme function as a community development tool that manages tourism resources. Thus, help the community in improving local economy and creating job opportunities.

From legitimate consumers to public relations pawns: the tobacco industry and young Australians

PubMed Central

Carter, S

2003-01-01

Objective: To document the Australian tobacco industry's activities regarding youth smoking to support tobacco control. Method: 492 industry documents from primary and secondary websites were abstracted and analysed. Results: Australian legislation and rhetoric on youth and tobacco has changed dramatically over the last 50 years, from an unproblematic association of teenagers and smoking in the 1960s, through the industry's aggressive attacks and denials in the 1980s, to the 1990s, when industry became newly compliant with "societal expectations" and youth became a dominant bargaining issue in the industry's public relations strategy. The industry's current policy is to simultaneously blame others for underage smoking, frame the industry as socially responsible via voluntary marketing codes, youth access programmes, and school education, and market actively to young adults. Conclusions: The arbitrary distinction between 17 and 18 year olds is, particularly in Australia's dark market, a liability for tobacco control and an opportunity for the industry, which is attempting to claim the high moral ground traditionally occupied by tobacco control on the youth issue. The current review of Australia's Tobacco Advertising Prohibition Act of 1992 should prohibit all forms of industry communication targeting young people, including retail access and schools programmes and below-the-line marketing. Tobacco control advocacy should highlight the industry's attempts to use the youth issue in its own favour while laying the blame elsewhere. PMID:14645951

From legitimate consumers to public relations pawns: the tobacco industry and young Australians.

PubMed

Carter, S M

2003-12-01

To document the Australian tobacco industry's activities regarding youth smoking to support tobacco control. 492 industry documents from primary and secondary websites were abstracted and analysed. Australian legislation and rhetoric on youth and tobacco has changed dramatically over the last 50 years, from an unproblematic association of teenagers and smoking in the 1960s, through the industry's aggressive attacks and denials in the 1980s, to the 1990s, when industry became newly compliant with "societal expectations" and youth became a dominant bargaining issue in the industry's public relations strategy. The industry's current policy is to simultaneously blame others for underage smoking, frame the industry as socially responsible via voluntary marketing codes, youth access programmes, and school education, and market actively to young adults. The arbitrary distinction between 17 and 18 year olds is, particularly in Australia's dark market, a liability for tobacco control and an opportunity for the industry, which is attempting to claim the high moral ground traditionally occupied by tobacco control on the youth issue. The current review of Australia's Tobacco Advertising Prohibition Act of 1992 should prohibit all forms of industry communication targeting young people, including retail access and schools programmes and below-the-line marketing. Tobacco control advocacy should highlight the industry's attempts to use the youth issue in its own favour while laying the blame elsewhere.

Towards computer-assisted surgery in shoulder joint replacement

NASA Astrophysics Data System (ADS)

Valstar, Edward R.; Botha, Charl P.; van der Glas, Marjolein; Rozing, Piet M.; van der Helm, Frans C. T.; Post, Frits H.; Vossepoel, Albert M.

A research programme that aims to improve the state of the art in shoulder joint replacement surgery has been initiated at the Delft University of Technology. Development of improved endoprostheses for the upper extremities (DIPEX), as this effort is called, is a clinically driven multidisciplinary programme consisting of many contributory aspects. A part of this research programme focuses on the pre-operative planning and per-operative guidance issues. The ultimate goal of this part of the DIPEX project is to create a surgical support infrastructure that can be used to predict the optimal surgical protocol and can assist with the selection of the most suitable endoprosthesis for a particular patient. In the pre-operative planning phase, advanced biomechanical models of the endoprosthesis fixation and the musculo-skeletal system of the shoulder will be incorporated, which are adjusted to the individual's morphology. Subsequently, the support infrastructure must assist the surgeon during the operation in executing his surgical plan. In the per-operative phase, the chosen optimal position of the endoprosthesis can be realised using camera-assisted tools or mechanical guidance tools. In this article, the pathway towards the desired surgical support infrastructure is described. Furthermore, we discuss the pre-operative planning phase and the per-operative guidance phase, the initial work performed, and finally, possible approaches for improving prosthesis placement.

Project Management Professional Development: An Industry Led Programme.

ERIC Educational Resources Information Center

Gale, Andrew; Brown, Mike

2003-01-01

Describes a modular master's program in project management. Explores relationships between return on investment, management competencies, and learning outcomes in the context of industry-academic partnerships. Discusses the managed learning environment using WebCT. (Contains 40 references.) (SK)

Integrating industrial seminars within a graduate engineering programme

NASA Astrophysics Data System (ADS)

Ringwood, John. V.

2013-05-01

The benefit of external, often industry-based, speakers for a seminar series associated with both undergraduate and graduate programmes is relatively unchallenged. However, the means by which such a seminar series can be encapsulated within a structured learning module, and the appropriate design of an accompanying assessment methodology, is not so obvious. This paper examines how such a learning module can be formulated and addresses the main issues involved in the design of such a module, namely the selection of speakers, format of seminars, method of delivery and assessment methodology, informed by the objectives of the module.

Joint Logistics Commanders Guide for the Management of Multinational Program,

DTIC Science & Technology

1981-07-01

purchase of the A-300 Airbus and the 1977 record-breaking export performance of the French and UK aerospace industries of around $5 billion and $2 billion...DIS. They are the Defense Industrial Security Clearance Office ( DISCO ), the Defense Industrial Security Institute (DISI), and the Office of Industrial...Security International (ISI). Defense Industrial Security Clearance Office ( DISCO ) The Defense Industrial Security Program (DISP) establishes pro

Outreach programmes to attract girls into computing: how the best laid plans can sometimes fail

NASA Astrophysics Data System (ADS)

Lang, Catherine; Fisher, Julie; Craig, Annemieke; Forgasz, Helen

2015-07-01

This article presents a reflective analysis of an outreach programme called the Digital Divas Club. This curriculum-based programme was delivered in Australian schools with the aim of stimulating junior and middle school girls' interest in computing courses and careers. We believed that we had developed a strong intervention programme based on previous literature and our collective knowledge and experiences. While it was coordinated by university academics, the programme content was jointly created and modified by practicing school teachers. After four years, when the final data were compiled, it showed that our programme produced significant change to student confidence in computing, but the ability to influence a desire to pursue a career path in computing did not fully eventuate. To gain a deeper insight in to why this may be the case, data collected from two of the schools are interrogated in more detail as described in this article. These schools were at the end of the expected programme outcomes. We found that despite designing a programme that delivered a multi-layered positive computing experience, factors beyond our control such as school culture and teacher technical self-efficacy help account for the unanticipated results. Despite our best laid plans, the expectations that this semester long programme would influence students' longer term career outcomes may have been aspirational at best.

Safety programmes in the Egyptian construction industry.

PubMed

Hassanein, Amr A G; Hanna, Ragaa S

2007-12-01

This study is aimed at exploring the nature of the safety programmes applied by large-size contractors operating in Egypt. Results revealed that safety programmes applied by those contractors were less formal than the programmes applied by their American counterparts. Only three contractors out of the surveyed sample had accident records broken down by projects, provided workers with formal safety orientation, and trained safety personnel on first-aid. The study recommended that reforms to the scheme of the employers' contribution to social insurance are necessary. This is meant to serve as a strong incentive for safety management.

“Accommodating” smoke‐free policies: tobacco industry's Courtesy of Choice programme in Latin America

PubMed Central

Sebrié, Ernesto M; Glantz, Stanton A

2007-01-01

Objective To understand the implementation and effects of the Courtesy of Choice programme designed to “accommodate” smokers as an alternative to smoke‐free polices developed by Philip Morris International (PMI) and supported by RJ Reynolds (RJR) and British American Tobacco (BAT) since the mid‐1990s in Latin America. Methods Analysis of internal tobacco industry documents, BAT “social reports”, news reports and tobacco control legislation. Results Since the mid‐1990s, PMI, BAT and RJR promoted Accommodation Programs to maintain the social acceptability of smoking. As in other parts of the world, multinational tobacco companies partnered with third party allies from the hospitality industry in Latin America. The campaign was extended from the hospitality industry (bars, restaurants and hotels) to other venues such as workplaces and airport lounges. A local public relations agency, as well as a network of engineers and other experts in ventilation systems, was hired to promote the tobacco industry's programme. The most important outcome of these campaigns in several countries was the prevention of meaningful smoke‐free policies, both in public places and in workplaces. Conclusions Courtesy of Choice remains an effective public relations campaign to undermine smoke‐free policies in Latin America. The tobacco companies' accommodation campaign undermines the implementation of measures to protect people from second‐hand smoke called for by the World Health Organization Framework Convention on Tobacco Control, perpetuating the exposure to tobacco smoke in indoor enclosed environments. PMID:17897975

Programmable motion of DNA origami mechanisms.

PubMed

Marras, Alexander E; Zhou, Lifeng; Su, Hai-Jun; Castro, Carlos E

2015-01-20

DNA origami enables the precise fabrication of nanoscale geometries. We demonstrate an approach to engineer complex and reversible motion of nanoscale DNA origami machine elements. We first design, fabricate, and characterize the mechanical behavior of flexible DNA origami rotational and linear joints that integrate stiff double-stranded DNA components and flexible single-stranded DNA components to constrain motion along a single degree of freedom and demonstrate the ability to tune the flexibility and range of motion. Multiple joints with simple 1D motion were then integrated into higher order mechanisms. One mechanism is a crank-slider that couples rotational and linear motion, and the other is a Bennett linkage that moves between a compacted bundle and an expanded frame configuration with a constrained 3D motion path. Finally, we demonstrate distributed actuation of the linkage using DNA input strands to achieve reversible conformational changes of the entire structure on ∼ minute timescales. Our results demonstrate programmable motion of 2D and 3D DNA origami mechanisms constructed following a macroscopic machine design approach.

Programmable motion of DNA origami mechanisms

PubMed Central

Marras, Alexander E.; Zhou, Lifeng; Su, Hai-Jun; Castro, Carlos E.

2015-01-01

DNA origami enables the precise fabrication of nanoscale geometries. We demonstrate an approach to engineer complex and reversible motion of nanoscale DNA origami machine elements. We first design, fabricate, and characterize the mechanical behavior of flexible DNA origami rotational and linear joints that integrate stiff double-stranded DNA components and flexible single-stranded DNA components to constrain motion along a single degree of freedom and demonstrate the ability to tune the flexibility and range of motion. Multiple joints with simple 1D motion were then integrated into higher order mechanisms. One mechanism is a crank–slider that couples rotational and linear motion, and the other is a Bennett linkage that moves between a compacted bundle and an expanded frame configuration with a constrained 3D motion path. Finally, we demonstrate distributed actuation of the linkage using DNA input strands to achieve reversible conformational changes of the entire structure on ∼minute timescales. Our results demonstrate programmable motion of 2D and 3D DNA origami mechanisms constructed following a macroscopic machine design approach. PMID:25561550

It's a Long Way down: The Underlying Tensions in the Education Export Industry

ERIC Educational Resources Information Center

Marginson, Simon

2011-01-01

The stellar rise of the education export industry in Australian higher education, and the even more spectacular downturn now occurring, mask underlying tensions that have long dogged the industry and prevented it from improving quality or achieving long-term sustainability. The international education programme has been unbalanced by the drive for…

Connecting Learners: The Role of Biotechnology Programme in Preparing Students for the Industry

ERIC Educational Resources Information Center

Mohd Saruan, Nadiah; Sagran, Avinash; Fadzil, Kamal Solhaimi; Razali, Zuliana; Ow Phui San, Rebecca; Somasundram, Chandran

2015-01-01

The recent growth of biotechnology requires a wide range of expertise within the industry. Education is the primary platform for students to gain information and knowledge on biotechnology. In Malaysia where biotechnology is relatively new, education programs and courses must be tailored to meet the demands of the industry. A combination of…

Defense Industrial Base Capabilities Study: Protection

DTIC Science & Technology

2004-12-01

Polyurethane Foam (RPF). 2) The Department should establish an Industrial Base Investment Fund to provide better on-ramps for production-ready...Sweep; − Rigid Polyurethane Foam (RPF). RECOMMENDATION 2 The Department should establish an Industrial Base Investment Fund (IBIF) to provide...Reactive RF Jamming 15. Expendable Programmable Acoustic Decoy 16. Rigid Polyurethane Foam 17. Towed Fabric Balloon Pressure Sweep 18. Chemical

Affordable, Robust Ceramic Joining Technology (ARCJoint) Developed

NASA Technical Reports Server (NTRS)

Steele, Gynelle C.

2001-01-01

Affordable, Robust Ceramic Joining Technology (ARCJoint) is a method for joining high temperature- resistant ceramic pieces together, establishing joints that are strong, and allowing joining to be done in the field. This new way of joining allows complex shapes to be formed by joining together geometrically simple shapes. The joining technology at NASA is one of the enabling technologies for the application of silicon-carbide-based ceramic and composite components in demanding and high-temperature applications. The technology is being developed and tested for high-temperature propulsion parts for aerospace use. Commercially, it can be used for joining ceramic pieces used for high temperature applications in the power-generating and chemical industries, as well as in the microelectronics industry. This innovation could yield big payoffs for not only the power-generating industry but also the Silicon Valley chipmakers. This technology, which was developed at the NASA Glenn Research Center by Dr. Mrityunjay Singh, is a two-step process involving first using a paste to join together ceramic pieces and bonding them by heating the joint to 110 to 120 C for between 10 and 20 min. This makes the joint strong enough to be handled for the final joining. Then, a silicon-based substance is applied to the joint and heated to 1400 C for 10 to 15 min. The resulting joint is as strong as the original ceramic material and can withstand the same high temperatures.

Multiprog Virtual Laboratory Applied to PLC Programming Learning

ERIC Educational Resources Information Center

Shyr, Wen-Jye

2010-01-01

This study develops a Multiprog virtual laboratory for a mechatronics education designed to teach how to programme a programmable logic controller (PLC). The study was carried out with 34 students in the Department of Industry Education and Technology at National Changhua University of Education in Taiwan. In total, 17 students were assigned to…

Assessment Guiding Learning: Developing Graduate Qualities in an Experiential Learning Programme

ERIC Educational Resources Information Center

Clements, Michael David; Cord, Bonnie Amelia

2013-01-01

As industry demands increase for a new type of graduate, there is more pressure than ever before for higher education (HE) to respond by cultivating and developing students who are prepared for these workplace challenges. This paper explores an innovative experiential learning programme built on the principles of work-related learning that…

Teacher's Experiences in PBL: Implications for Practice

ERIC Educational Resources Information Center

Alves, Anabela C.; Sousa, Rui M.; Fernandes, Sandra; Cardoso, Elisabete; Carvalho, Maria Alice; Figueiredo, Jorge; Pereira, Rui M. S.

2016-01-01

Project-Based Learning (PBL) has been implemented in the first year of the Industrial Engineering and Management programme at the University of Minho, Portugal, since 2004/2005. The purpose of this paper is to analyse and discuss teachers' experiences in PBL in this programme and to explore its implications for student learning and for teaching…

Computerised Accounting Software; A Curriculum That Enhances an Accounting Programme

ERIC Educational Resources Information Center

Machera, Robert P.; Machera, Precious C.

2017-01-01

There has been an outcry in commerce and industry about students who fail to perform in the accounting department due to lack of "practical accounting skills". It is from this background that the researchers were motivated to investigate the impact of a Computerised Accounting Software Curriculum that enhances an Accounting Programme. At…

Industrial training approach using GPM P5 Standard for Sustainability in Project Management: a framework for sustainability competencies in the 21st century

NASA Astrophysics Data System (ADS)

Johan, Kartina; Mohd Turan, Faiz

2016-11-01

Malaysian Engineering Accreditation (Engineering Programme Accreditation Manual, 2007) requires all bachelor degree in engineering programmes to incorporate a minimum of two months industrial training in order for the programme to be accredited by the council. The industrial training has the objective to provide students on the insights of being an engineer at the workplace hence increasing their knowledge in employability skills prior to graduation. However the current structure of industrial training is not able to inculcate good leadership ability and prepare students with sustainability competencies needed in the era of Sustainable Development (SD). This paper aims to study project management methodology as a framework to create a training pathway in industrial training for students in engineering programs using Green Project Management (GPM) P5 standard for sustainability in project management. The framework involves students as interns, supervisors from both university and industry and also participation from NonProfit Organisation (NPO). The framework focus on the development of the student's competency in employability skills, lean leadership and sustainability competencies using experiential learning approach. Deliverables of the framework include internship report, professional sustainability report using GPM P5 standard and competency assessment. The post-industrial phase of the framework is constructed for students to be assessed collaboratively by the university, industry and the sustainability practitioner in the country. The ability for the interns to act as a change agent in sustainability practices is measured by the competency assessment and the quality of the sustainability report. The framework support the call for developing holistic students based on Malaysian Education Blueprint (Higher Education) 2015-2025 and address the gap between the statuses of engineering qualification to the sustainability competencies in the 21st century in particular by achieving the Sustainability Graduates (SG) attributes outlined in the framework.

Direct adaptive control of a PUMA 560 industrial robot

NASA Technical Reports Server (NTRS)

Seraji, Homayoun; Lee, Thomas; Delpech, Michel

1989-01-01

The implementation and experimental validation of a new direct adaptive control scheme on a PUMA 560 industrial robot is described. The testbed facility consists of a Unimation PUMA 560 six-jointed robot and controller, and a DEC MicroVAX II computer which hosts the Robot Control C Library software. The control algorithm is implemented on the MicroVAX which acts as a digital controller for the PUMA robot, and the Unimation controller is effectively bypassed and used merely as an I/O device to interface the MicroVAX to the joint motors. The control algorithm for each robot joint consists of an auxiliary signal generated by a constant-gain Proportional plus Integral plus Derivative (PID) controller, and an adaptive position-velocity (PD) feedback controller with adjustable gains. The adaptive independent joint controllers compensate for the inter-joint couplings and achieve accurate trajectory tracking without the need for the complex dynamic model and parameter values of the robot. Extensive experimental results on PUMA joint control are presented to confirm the feasibility of the proposed scheme, in spite of strong interactions between joint motions. Experimental results validate the capabilities of the proposed control scheme. The control scheme is extremely simple and computationally very fast for concurrent processing with high sampling rates.

Tobacco point‐of‐purchase promotion: examining tobacco industry documents

PubMed Central

Lavack, Anne M; Toth, Graham

2006-01-01

In the face of increasing media restrictions around the world, point‐of‐purchase promotion (also called point‐of‐sale merchandising, and frequently abbreviated as POP or POS) is now one of the most important tools that tobacco companies have for promoting tobacco products. Using tobacco industry documents, this paper demonstrates that tobacco companies have used point‐of‐purchase promotion in response to real or anticipated advertising restrictions. Their goal was to secure dominance in the retail setting, and this was achieved through well‐trained sales representatives who offered contracts for promotional incentive programmes to retailers, which included the use of point‐of‐sale displays and merchandising fixtures. Audit programmes played an important role in ensuring contract enforcement and compliance with a variety of tobacco company incentive programmes. Tobacco companies celebrated their merchandising successes, in recognition of the stiff competition that existed among tobacco companies for valuable retail display space. PMID:16998172

Tobacco point-of-purchase promotion: examining tobacco industry documents.

PubMed

Lavack, Anne M; Toth, Graham

2006-10-01

In the face of increasing media restrictions around the world, point-of-purchase promotion (also called point-of-sale merchandising, and frequently abbreviated as POP or POS) is now one of the most important tools that tobacco companies have for promoting tobacco products. Using tobacco industry documents, this paper demonstrates that tobacco companies have used point-of-purchase promotion in response to real or anticipated advertising restrictions. Their goal was to secure dominance in the retail setting, and this was achieved through well-trained sales representatives who offered contracts for promotional incentive programmes to retailers, which included the use of point-of-sale displays and merchandising fixtures. Audit programmes played an important role in ensuring contract enforcement and compliance with a variety of tobacco company incentive programmes. Tobacco companies celebrated their merchandising successes, in recognition of the stiff competition that existed among tobacco companies for valuable retail display space.

Creating global networks through an online engineering graduate programme

NASA Astrophysics Data System (ADS)

Murray, M. H.

2011-03-01

Internationally, the railway industry is facing a severe shortage of engineers with high-level, relevant, professional and technical knowledge and abilities, in particular amongst engineers involved in the design, construction and maintenance of railway infrastructure. A unique graduate level programme has been created to meet that global need via a fully online, distance education format. The development and operation of this Master of Engineering degree is proposed as a model of the process needed for industry-relevance, flexible delivery, international networking and professional development required for a successful graduate engineering programme in the twenty-first century. In particular, this paper demonstrates how a mix of new and more familiar technologies are utilised through a variety of tasks to overcome the huge distances and multiple time zones that separate the participants across a growing number of countries, successfully achieving close and sustained interaction amongst the participants and railway experts.

Training Programme for Supervisors. An Element in Quality Assurance of the Construction Industry.

ERIC Educational Resources Information Center

Lo, Tommy Y.

1998-01-01

A customized program on concrete technology for the construction industry in Hong Kong is based on the ISO 9000 quality management system. More than 269 students have been trained; 48.7% of enrollment comes from concrete suppliers. (SK)

The origins of the bioeconomy in the European Union.

PubMed

Patermann, Christian; Aguilar, Alfredo

2018-01-25

This article outlines the context and circumstances that favoured the development of a Bioeconomy Strategy in the European Union (EU) and the role played by the different Framework programmes for Research, Technological Development and Demonstration. Particular attention is given to the biotechnology related programmes and more specifically to the "Cell Factory" Key Action in the 5th Framework Programme (1998-2002). This, together with the parallel development of a Strategy on Biotechnology in 2002, served as a solid foundation for the creation of the, at the time, so-called Knowledge-Based Bio-Economy (KBBE). The KBBE concept emerged in 2005, a couple of years before the launch of the 7th Framework Programme (2007-2013). The experience accumulated over the years and the new societal expectations triggered the EU to launch a Strategy on Bioeconomy in 2012. This article concludes with a brief analysis of the two most important impacts of the EU Strategy on Bioeconomy. One is the Bioeconomy dedicated activity within the Programme Horizon 2020 (2014-2020), and the other the creation of a public-private partnership of bio-based industries. Both the impact of Horizon 2020 on the EU Bioeconomy Strategy and the bio-based industries public-private partnership are analysed in depth in two articles elsewhere in this volume. Copyright © 2017 Elsevier B.V. All rights reserved.

An evaluation of bridge deck joint sealing systems in Virginia.

DOT National Transportation Integrated Search

2003-01-01

The design and fabrication of bridge expansion joint (or movement) systems comprise a rapidly evolving industry. New designs are constantly being presented for trial, often on a piecemeal basis. Occasionally, failures of products occur without suffic...

Challenges and Strength of Current Industrial Energy Efficiency Management Practices in Steam Industries

NASA Astrophysics Data System (ADS)

Nkosi, S. B.; Pretorius, J. H. C.

2017-07-01

The aim of this study is to achieve greater output by examining the existing way of coordinating the determined attempts of Steam Industries in South Africa to successfully reach a sustainable industrial development by using energy source adequately in a more competent way. Furthermore into the study we look at obstacles that prevent and those that leads to maximum utilization of energy management measures and also highlights the effects of implementing cheap available energy source in South Africa. The investigation and analysis have shown that energy is not well managed in Steam Industries and that the use of energy is minimized and not fully utilized due to poor management and lack of knowledge. Another detection was that lack of government structured and strategic measures of implementing and motivating the use of energy effectively. The effective and rational use of available power by Steam Industries in South Africa is a key player in developing a sustainable industrial development. The use of energy efficiency management strategies has contributed an increase in economic and improve environmentally friendly in the industrial sector. The slow pace adoption of energy saving and cost effective management programmes are negatively impacting on the benefits to Steam Industries in South Africa. In conclusion the study finds that the economy can be boosted by implementing energy efficiency management programmes and environmentally friendly. These will also stabilize the negative impact of energy raising prices.

JPRS Report, Nuclear Developments

DTIC Science & Technology

1989-06-28

the Industrial Devel- opment Corporation, the Department of Posts and Tele- communications , the weather bureau, the Department of Trade and...Industry, the SABC [South African Broad- casting Corporation] and the academic space research community had been appointed to keep up with space- related...wanted to launch its own space programme for communication , commercial, industrial and military purposes. JPRS-TND-89-013 28 June 1989 CHINA

Spring 2006. Industry Study. Information Technology Industry

DTIC Science & Technology

2006-01-01

unclassified c . THIS PAGE unclassified Standard Form 298 (Rev. 8-98) Prescribed by ANSI Std Z39-18 i Information Technology 2006 ABSTRACT...integration of processors, coprocessors, memory, storage, etc. into a user-programmable final product. C . Software (Apple, Oracle): These firms...able to support the U.S. national security interests. C . Manufacturing: The personal computer manufacturing industry has also changed considerably

Commercialization of opportunities for materials processing in low gravity

NASA Technical Reports Server (NTRS)

Brown, W. S.; Nixon, S. R.

1983-01-01

Business infrastructure required to achieve commercial MPS, incentives and disincentives for MPS, NASA/industry working agreements, small business innovation, NASA/industry agreements, joint venture agreements, and commercial spinoffs are addressed.

Design and fabrication of realistic adhesively bonded joints

NASA Technical Reports Server (NTRS)

Shyprykevich, P.

1983-01-01

Eighteen bonded joint test specimens representing three different designs of a composite wing chordwise bonded splice were designed and fabricated using current aircraft industry practices. Three types of joints (full wing laminate penetration, two side stepped; midthickness penetration, one side stepped; and partial penetration, scarfed) were analyzed using state of the art elastic joint analysis modified for plastic behavior of the adhesive. The static tensile fail load at room temperature was predicted to be: (1) 1026 kN/m (5860 1b/in) for the two side stepped joint; (2) 925 kN/m (5287 1b/in) for the one side stepped joint; and (3) 1330 kN/m (7600 1b/in) for the scarfed joint. All joints were designed to fail in the adhesive.

Italian Exposition

ScienceCinema

None

2017-12-09

Le DG parle dans son allocution à l'occasion de l'exposition (suivi d'une visite)de la contribution du Cern à la création d'une espace de la technologie européenne. Il parle de la manière comment organiser des formes fructueuses de coopération et coordination internationales dans ce domaine. "Afin de renforcer encore notre relation avec l'industrie et intensifier le transfert de la technologie nous proposerons au ministre de recherche de poursuivre dans le cadre du programme EUREKA ensemble avec les industries des programmes concrètes." Le ministre italien prend ensuite la parole.

An anatomy of industrial robots and their controls

NASA Astrophysics Data System (ADS)

Luh, J. Y. S.

1983-02-01

The modernization of manufacturing facilities by means of automation represents an approach for increasing productivity in industry. The three existing types of automation are related to continuous process controls, the use of transfer conveyor methods, and the employment of programmable automation for the low-volume batch production of discrete parts. The industrial robots, which are defined as computer controlled mechanics manipulators, belong to the area of programmable automation. Typically, the robots perform tasks of arc welding, paint spraying, or foundary operation. One may assign a robot to perform a variety of job assignments simply by changing the appropriate computer program. The present investigation is concerned with an evaluation of the potential of the robot on the basis of its basic structure and controls. It is found that robots function well in limited areas of industry. If the range of tasks which robots can perform is to be expanded, it is necessary to provide multiple-task sensors, or special tooling, or even automatic tooling.

Fluid flow analysis of E-glass fiber reinforced pipe joints in oil and gas industry

NASA Astrophysics Data System (ADS)

Bobba, Sujith; Leman, Z.; Zainuddin, E. S.; Sapuan, S. M.

2018-04-01

Glass Fiber reinforced composites have become increasingly important over the past few years and now they are the first choice materials for fabricating pipes with low weight in combination with high strength and stiffness. In Oil And Gas Industry, The Pipelines transporting heavy crude oil are subjected to variable pressure waves causing fluctuating stress levels in the pipes. Computational Fluid Dynamics (CFD) analysis was performed using solid works flow stimulation software to study the effects of these pressure waves on some specified joints in the pipes. Depending on the type of heavy crude oil being used, the flow behavior indicated a considerable degree of stress levels in certain connecting joints, causing the joints to become weak over a prolonged period of use. This research proposes a new perspective that is still required to be developed regarding the change of the pipe material, fiber winding angle in those specified joints and finally implementing cad wind technology to check the output result of the stress levels so that the life of the pipes can be optimized.

Assessment of tri-dyne precast concrete panels.

DOT National Transportation Integrated Search

2008-01-01

Tri-Dyne Industries has developed precast concrete paving slabs (PCPS) that connect using tongue and groove joints and overlap joints, as shown in Figure 1 (1). This proprietary system is referred to as the Pro-Active Paving SystemTM and consis...

F-Gas Partnership Programs

EPA Pesticide Factsheets

Provides basic information and resources for the Fluorinated Gas Partnership Programs, which were launched as a joint effort by EPA and industry groups to reduce the amount of fluorinated gases emitted through a variety of industrial processes.

Tapping into the "Standing-Reserve": A Comparative Analysis of Workers' Training Programmes in Kolkata and Toronto

ERIC Educational Resources Information Center

Maitra, Saikat; Maitra, Srabani

2015-01-01

This paper examines employment-related training programmes offered by state funded agencies and multinational corporations in Toronto (Canada) and Kolkata (India). In recent years both cities have witnessed a rise in the service sector industries aligned with global regimes of flexible work and the consequent reinvention of a worker subject that…

The Professional Development Requirements of Workplace English Language and Literacy Programme Practitioners. An Adult Literacy National Project Report

ERIC Educational Resources Information Center

Berghella, Tina; Molenaar, John; Wyse, Linda

2006-01-01

This report examines the extent and nature of professional development required to meet the current and future needs of Workplace English Language and Literacy Programme practitioners. While the working environment for such practitioners is becoming more complex, with greater demands on them to have industry knowledge and project management…

Science-Based Business Studies at Leiden University

ERIC Educational Resources Information Center

Jousma, Harmen

2006-01-01

The Science Based Business (SBB) programme was established at Leiden University in 2001 in an effort to counter the unidirectional professionalism of students in science studies--not explicitly to meet the needs of business and industry. Nor is SBB a stand-alone Master's programme like the MS/MBA or the PSM in the USA: rather, it is designed to be…

Experiences of Educational Content in Swedish Technical Vocational Education: Examples from the Energy and Industry Programmes

ERIC Educational Resources Information Center

Kilbrink, Nina; Bjurulf, Veronica; Olin-Scheller, Christina; Tengberg, Michael

2014-01-01

In this study, teachers and workplace supervisors in two vocational programmes at a Swedish upper secondary school were interviewed about their experiences of what is important to teach and learn during vocational education. The interviews were analysed thematically by the qualitative method analysis of narratives concerning what the informants…

2011 Joint Program Executive Office for Chemical and Biological Defense Advance Planning Briefing for Industry (APBI) Held in Baltimore, Maryland on September 7-9, 2011

DTIC Science & Technology

2011-09-09

Chemical and Biological Defense Defense Threat Reduction Agency (DTRA)/Joint Science & Technology Office (JSTO) Dr. Alan Rudolph , Director, Chemical...Mr. Douglas W. Bryce 9:05 am – 9:45 am Dr. Alan Rudolph Director, Chemical and Biological Technologies Directorate, Defense Threat Reduction...Joint Science and Technology Office for Chemical and Biological Defense Dr. Alan S. Rudolph Mr. David K. Grimm Acting Heidi Shyu Joint Combat

SOLAR PASTEURIZER WITH INTEGRAL HEAT EXCHANGER FOR TREATING WATER IN RURAL AREAS

EPA Science Inventory

According to the WHO/UNICEF Joint Monitoring Programme for Water Supply and Sanitation there are currently 1.1 billion people without access to safe water on the planet. Every year more than five million people die from the lack of safe water and improper sanitation. Child...

How To Prepare Materials for Neo-Literates. Literacy Lessons.

ERIC Educational Resources Information Center

Sasaoka, Taichi

Literacy materials are either for illiterate people or for neoliterate people (those who have attained limited literacy but might easily relapse if they do not practice reading with appropriate materials). Thirty-five kinds of prototype materials for neoliterate persons have been developed by the Asian/Pacific Joint Production Programme of…

An Eastern Paradigm of Evaluation

ERIC Educational Resources Information Center

Russon, Craig

2008-01-01

Teaching on the philosophies of evaluation as part of a pilot introductory course of a new diploma programme jointly sponsored by the United Nations (UN) Evaluation Group and the United Nations Staff College, the author compared and contrasted the "rationalistic" paradigm with the "naturalistic" paradigm on the basis of ontology, epistemology, and…

Accelerating Early Language Development with Multi-Sensory Training

ERIC Educational Resources Information Center

Bjorn, Piia M.; Kakkuri, Irma; Karvonen, Pirkko; Leppanen, Paavo H. T.

2012-01-01

This paper reports the outcome of a multi-sensory intervention on infant language skills. A programme titled "Rhyming Game and Exercise Club", which included kinaesthetic-tactile mother-child rhyming games performed in natural joint attention situations, was intended to accelerate Finnish six- to eight-month-old infants' language development. The…

Reframing European Doctoral Training for the New ERA

ERIC Educational Resources Information Center

Repeckaite, Daiva

2016-01-01

In 2014 the institutionalization of European higher education and training, as well as research and innovation, policy entered a new phase: a number of financial instruments were simplified and merged. The Erasmus Mundus programme, wherein consortia of European and overseas universities built joint master's or doctoral degrees, was split into two…

Engaging Employers in Apprenticeship Opportunities: Making It Happen Locally

ERIC Educational Resources Information Center

OECD Publishing, 2017

2017-01-01

This joint OECD-ILO publication provides guidance on how local and regional governments can foster business-education partnerships in apprenticeship programmes and other types of work-based learning, drawing on case studies across nine countries. There has been increasing interest in apprenticeships which combine on the job training with…

Providing for the Future: Providers' Views on Apprenticeship Reform

ERIC Educational Resources Information Center

McCrone, Tami; Sims, David; Gladding, Cath

2016-01-01

Apprenticeships are currently undergoing reform in England. Funding mechanisms and the content of Apprenticeship programmes are being restructured. NFER and the Association of Employment and Learning Providers (AELP) have carried out a joint research project to inform future policy and practice with evidence on how providers of Apprenticeships are…

Meeting the requirements of importing countries: practice and policy for on-farm approaches to food safety.

PubMed

Dagg, P J; Butler, R J; Murray, J G; Biddle, R R

2006-08-01

In light of the increasing consumer demand for safe, high-quality food and recent public health concerns about food-borne illness, governments and agricultural industries are under pressure to provide comprehensive food safety policies and programmes consistent with international best practice. Countries that export food commodities derived from livestock must meet both the requirements of the importing country and domestic standards. It is internationally accepted that end-product quality control, and similar methods aimed at ensuring food safety, cannot adequately ensure the safety of the final product. To achieve an acceptable level of food safety, governments and the agricultural industry must work collaboratively to provide quality assurance systems, based on sound risk management principles, throughout the food supply chain. Quality assurance systems on livestock farms, as in other parts of the food supply chain, should address food safety using hazard analysis critical control point principles. These systems should target areas including biosecurity, disease monitoring and reporting, feedstuff safety, the safe use of agricultural and veterinary chemicals, the control of potential food-borne pathogens and traceability. They should also be supported by accredited training programmes, which award certification on completion, and auditing programmes to ensure that both local and internationally recognised guidelines and standards continue to be met. This paper discusses the development of policies for on-farm food safety measures and their practical implementation in the context of quality assurance programmes, using the Australian beef industry as a case study.

Recreational Diving Impacts on Coral Reefs and the Adoption of Environmentally Responsible Practices within the SCUBA Diving Industry

NASA Astrophysics Data System (ADS)

Roche, Ronan C.; Harvey, Chloe V.; Harvey, James J.; Kavanagh, Alan P.; McDonald, Meaghan; Stein-Rostaing, Vivienne R.; Turner, John R.

2016-07-01

Recreational diving on coral reefs is an activity that has experienced rapidly growing levels of popularity and participation. Despite providing economic activity for many developing coastal communities, the potential role of dive impacts in contributing to coral reef damage is a concern at heavily dived locations. Management measures to address this issue increasingly include the introduction of programmes designed to encourage environmentally responsible practices within the dive industry. We examined diver behaviour at several important coral reef dive locations within the Philippines and assessed how diver characteristics and dive operator compliance with an environmentally responsible diving programme, known as the Green Fins approach, affected reef contacts. The role of dive supervision was assessed by recording dive guide interventions underwater, and how this was affected by dive group size. Of the 100 recreational divers followed, 88 % made contact with the reef at least once per dive, with a mean (±SE) contact rate of 0.12 ± 0.01 per min. We found evidence that the ability of dive guides to intervene and correct diver behaviour in the event of a reef contact decreases with larger diver group sizes. Divers from operators with high levels of compliance with the Green Fins programme exhibited significantly lower reef contact rates than those from dive operators with low levels of compliance. The successful implementation of environmentally responsible diving programmes, which focus on influencing dive industry operations, can contribute to the management of human impacts on coral reefs.

Banks: Colleges - A Joint Undertaking.

ERIC Educational Resources Information Center

Cordy, Thomas O.

The banking industry has recognized an increasing need to recruit, hire, and train minorities for positions within the industry. Following this line of thought, the American Bankers Association (ABA) formed a task force composed of bankers and black college educators to develop a program mutually beneficial to industry as well as colleges. A Black…

Critical interactions between Global Fund-supported programmes and health systems: a case study in Indonesia.

PubMed

Desai, Monica; Rudge, James W; Adisasmito, Wiku; Mounier-Jack, Sandra; Coker, Richard

2010-11-01

The Global Fund to Fight AIDS, Tuberculosis and Malaria has played an important role in financing the response to HIV/AIDS and tuberculosis (TB) in Indonesia. As part of a series of case studies, we assessed the nature and extent of integration of Global Fund portfolios into the national HIV and TB programmes, integration of the HIV and TB programmes within the general health system, and system-wide effects of Global Fund support on the health care system in Indonesia. The study relied on a literature review and interviews with 22 key informants using the Systemic Rapid Assessment Toolkit and thematic analysis. Global Fund programmes in Indonesia are highly vertical and centralized, in contrast with the decentralized nature of the Indonesian health system. Consequently, there is more integration of all functions at local levels than centrally. There is a high level of integration of planning of Global Fund HIV and TB portfolios into the National AIDS and TB programmes and some limited integration of these programmes with other disease programmes, through joint working groups. Other synergies include strengthening of stewardship and governance and increased staff recruitment encouraged by incentive payments and training. Monitoring and evaluation functions of the Global Fund programmes are not integrated with the disease programmes, with parallel indicators and reporting systems. System-wide effects include greater awareness of governance and stewardship in response to the temporary suspension of Global Fund funding in 2008, and increased awareness of the need to integrate programme planning, financing and service delivery. Global Fund investment has freed up resources for other programmes, particularly at local levels. However, this may hinder a robust exit strategy from Global Fund funding. Furthermore, Global Fund monetary incentives may result in staff shifting into HIV and TB programmes.

"Understanding my ALS". Experiences and reflections of persons with amyotrophic lateral sclerosis and relatives on participation in peer group rehabilitation.

PubMed

Madsen, Louise Sofia; Jeppesen, Jørgen; Handberg, Charlotte

2018-01-26

The aim of this study was to gain insight into experiences and reflections of persons with amyotrophic lateral sclerosis and relatives concerning the peer group rehabilitation programme "More Life - Less Illness". This qualitative study used the Interpretive Description methodology with Symbolic Interactionism as the analytical framework. Eighteen programme participants representing persons with amyotrophic lateral sclerosis (n = 8) and relatives (n = 10) were included. Data consisted of individual interviews and participant observation. The analysis revealed two categorical themes, "Sense of Community Building" and "Understanding my ALS", which represented the participants' experiences and reflections on peer group rehabilitation. Through the analysis, it became apparent that "Sense of Community Building" gave rise to an increased and personalised understanding of amyotrophic lateral sclerosis among the participants. As a part of the continuous processing of the knowledge gained, "Facing Facts" and "Retaining Normality" appeared as subthemes regarding the participants' ability to live a less dependent and more meaningful life. This study of peer group rehabilitation for persons with amyotrophic lateral sclerosis and relatives indicates that programme participation leads to positive experiences in terms of living a shared meaningful life despite severe disability. The findings may guide practice to develop longitudinal peer group rehabilitation programmes with joint inclusion of persons with amyotrophic lateral sclerosis and relatives. Implications for Rehabilitation Peer group rehabilitation may facilitate an increased and personalised understanding of what it means to live with amyotrophic lateral sclerosis. A programme design with six months of sequential sessions enables a continuous processing of shared experiences and gained knowledge. Joint participation of persons with amyotrophic lateral sclerosis and their relatives supports both their internal relationship and social networking. Peer group rehabilitation in amyotrophic lateral sclerosis should help overcome obstacles concerning the needs of participants, accessibility, and geographical distance.

Reducing bottlenecks: professionals’ and adolescents’ experiences with transitional care delivery

PubMed Central

2014-01-01

Background The purpose of this study was to describe the interventions implemented in a quality improvement programme to improve transitional care and evaluate its effectiveness in reducing bottlenecks as perceived by professionals and improving chronically ill adolescents’ experiences with care delivery. Methods This longitudinal study was undertaken with adolescents and professionals who participated in the Dutch ‘On Your Own Feet Ahead!’ quality improvement programme. This programme followed the Breakthrough Series improvement and implementation strategy. A total of 102/128 (79.7%) professionals from 21 hospital teams filled out a questionnaire at the start of the programme (T0), and 79/123 (64.2%; five respondents had changed jobs) professionals completed the same questionnaire 1 year later (T1). Seventy-two (58.5%) professionals from 21 teams returned questionnaires at both time points. Of 389 and 430 participating adolescents, 36% and 41% returned questionnaires at T0 and T1, respectively. We used descriptive statistics and two-tailed, paired t-tests to investigate improvements in bottlenecks in transitional care (perceived by professionals) and care delivery (perceived by adolescents). Results Professionals observed improvement in all bottlenecks at T1 (vs. T0; p < 0.05), especially in the organisation of care, such as the presence of a joint mission between paediatric and adult care, coordination of care, and availability of more resources for joint care services. Within a 1-year period, the transition programme improved some aspects of patients’ experiences with care delivery, such as the provision of opportunities for adolescents to visit the clinic alone (p < 0.001) and to decide who should be present during consultations (p < 0.05). Conclusions This study demonstrated that transitional care interventions may improve the organisation and coordination of transitional care and better prepare adolescents for the transition to adult care within a 1-year period. By setting specific goals based on experiences with bottlenecks, the breakthrough approach helped to improve transitional care delivery for adolescents with chronic conditions. PMID:24485282

Bio-based Industries Joint Undertaking: The catalyst for sustainable bio-based economic growth in Europe.

PubMed

Mengal, Philippe; Wubbolts, Marcel; Zika, Eleni; Ruiz, Ana; Brigitta, Dieter; Pieniadz, Agata; Black, Sarah

2018-01-25

This article discusses the preparation, structure and objectives of the Bio-based Industries Joint Undertaking (BBI JU). BBI JU is a public-private partnership (PPP) between the European Commission (EC) and the Bio-based Industries Consortium (BIC), the industry-led private not-for-profit organisation representing the private sectors across the bio-based industries. The model of the public-private partnership has been successful as a new approach to supporting research and innovation and de-risking investment in Europe. The BBI JU became a reality in 2014 and represents the largest industrial and economic cooperation endeavour financially ever undertaken in Europe in the area of industrial biotechnologies. It is considered to be one of the most forward-looking initiatives under Horizon 2020 and demonstrates the circular economy in action. The BBI JU will be the catalyst for this strategy to mobilise actors across Europe including large industry, small and medium-sized enterprises (SMEs), all types of research organisations, networks and universities. It will support regions and in doing so, the European Union Member States and associated countries in the implementation of their bioeconomy strategies. Copyright © 2017 Elsevier B.V. All rights reserved.

Recommendations for the use of precast deck panels at expansion joints

DOT National Transportation Integrated Search

2008-11-01

Prestressed concrete panels have been used by the bridge construction industry in the state of Texas for many : years to increase construction speed and improve safety and economy. At expansion joints, cast-in-place concrete : is used and requires te...

Pharmacist-industry relationships.

PubMed

Saavedra, Keene; O'Connor, Bonnie; Fugh-Berman, Adriane

2017-12-01

The purpose of this study was to document, in their own words, beliefs and attitudes that American pharmacists have towards the pharmaceutical industry and pharmacists' interactions with industry. An ethnographic-style qualitative study was conducted utilizing open-ended interviews with four hospital pharmacists, two independent pharmacists, two retail pharmacists and one administrative pharmacist in the Washington, DC, metropolitan area to elicit descriptions of and attitudes towards pharmacists' relationships with industry. Analysis of the qualitative material followed established ethnographic conventions of narrative thematic analysis. All pharmacists reported interactions with pharmaceutical company representatives. Most had received free resources or services from industry, including educational courses. Respondents uniformly believed that industry promotional efforts are primarily directed towards physicians. Although respondents felt strongly that drug prices were excessive and that 'me-too' drugs were of limited use, they generally had a neutral-to-positive view of industry-funded adherence/compliance programmes, coupons, vouchers, and copay payment programmes. Interviewees viewed direct-to-consumer advertising negatively, but had a generally positive view of industry-funded drug information. Pharmacists may represent a hitherto under-identified cohort of health professionals who are targeted for industry influence; expanding roles for pharmacists may make them even more attractive targets for future industry attention. Pharmacy schools should ensure that students learn to rely on unbiased information sources and should teach students about conflicts of interest and the risks of interacting with industry. Further research should be conducted on the extent to which pharmacists' attitudes towards their duties and towards drug assessment and recommendation are influenced by the pharmaceutical industry. © 2017 Royal Pharmaceutical Society.

The Emergence of the Skills Approach in Industry and Its Consequences for the Training of Engineers

ERIC Educational Resources Information Center

Pascail, Laurent

2006-01-01

It is striking to notice that the notion of skill is not only used in industry but also in higher education in most major industrialized countries. If a significant number of companies have taken a skills approach, one notices that this term is also used in higher education to determine teaching programmes according to a simple idea: higher…

Re-thinking global health sector efforts for HIV and tuberculosis epidemic control: promoting integration of programme activities within a strengthened health system.

PubMed

Maher, Dermot

2010-07-05

The global financial crisis threatens global health, particularly exacerbating diseases of inequality, e.g. HIV/AIDS, and diseases of poverty, e.g. tuberculosis. The aim of this paper is to reconsider established practices and policies for HIV and tuberculosis epidemic control, aiming at delivering better results and value for money. This may be achieved by promoting greater integration of HIV and tuberculosis control programme activities within a strengthened health system. HIV and tuberculosis share many similarities in terms of their disease burden and the recommended stratagems for their control. HIV and tuberculosis programmes implement similar sorts of control activities, e.g. case finding and treatment, which depend for success on generic health system issues, including vital registration, drug procurement and supply, laboratory network, human resources, and financing. However, the current health system approach to HIV and tuberculosis control often involves separate specialised services. Despite some recent progress, collaboration between the programmes remains inadequate, progress in obtaining synergies has been slow, and results remain far below those needed to achieve universal access to key interventions. A fundamental re-think of the current strategic approach involves promoting integrated delivery of HIV and tuberculosis programme activities as part of strengthened general health services: epidemiological surveillance, programme monitoring and evaluation, community awareness of health-seeking behavior, risk behaviour modification, infection control, treatment scale-up (first-line treatment regimens), drug-resistance surveillance, containing and countering drug-resistance (second-line treatment regimens), research and development, global advocacy and global partnership. Health agencies should review policies and progress in HIV and tuberculosis epidemic control, learn mutual lessons for policy development and scaling up interventions, and identify ways of joint planning and joint funding of integrated delivery as part of strengthened health systems. As both a danger and an opportunity, the global financial crisis may entail disaster or recovery for global health sector efforts for HIV and tuberculosis epidemic control. Review of policies and progress in control paves the way for identification of synergies between the two programmes, within strengthened health services. The silver lining in the global economic crisis could be better control of the HIV and tuberculosis epidemics, better overall health system performance and outcomes, and better value for money.

Scaling up of HIV-TB collaborative activities: Achievements and challenges in India.

PubMed

Deshmukh, Rajesh; Shah, Amar; Sachdeva, K S; Sreenivas, A N; Gupta, R S; Khaparde, S D

2016-01-01

India has been implementing HIV/TB collaborative activities since 2001 with rapid scale-up of infrastructure across the country during past decade in National AIDS Control Programme and Revised National TB Control Programme. India has shown over 50% reduction in new infections and around 35% reduction in AIDS-related deaths, thereby being one of the success stories globally. Substantial progress in the implementation of collaborative TB/HIV activities has occurred in India and it is marching towards target set out in the Global Plan to Stop TB and endorsed by the UN General Assembly to halve HIV associated TB deaths by 2015. While the successful approaches have led to impressive gains in HIV/TB control in India, there are emerging challenges including newer pockets with rising HIV trends in North India, increasing drug resistance, high mortality among co-infected patients, low HIV testing rates among TB patients in northern and eastern states in India, treatment delays and drop-outs, stigma and discrimination, etc. In spite of these difficulties, established HIV/TB coordination mechanisms at different levels, rapid scale-up of facilities with decentralisation of treatment services, regular joint supervision and monitoring, newer initiatives like use of rapid diagnostics for early diagnosis of TB among people living with HIV, TB notification, etc. have led to success in combating the threat of HIV/TB in India. This article highlights the steps taken by India, one of the largest HIV/TB programmes in world, in scaling up of the joint HIV-TB collaborative activities, the achievements so far and discusses the emerging challenges which could provide important lessons for other countries in scaling up their programmes. Copyright © 2016 Tuberculosis Association of India. Published by Elsevier B.V. All rights reserved.

The Japanese and Indian space programmes : two roads into space

NASA Astrophysics Data System (ADS)

Harvey, Brian

The development of the space industry in the Asian and Pacific Rim region provides the context for this book. The two major countries hoping for leadership in the area (apart from China) are Japan and India, both of whom have significant launcher capabilities.There is a general introductory chapter which places the space programmes of the region in the comparative context of the other space-faring nations of the world. The author reviews the main space programmes of Japan and India in turn, concentrating on their origins, the development of launcher and space facilities, scientific and engineering programmes, and future prospects.The book concludes with a chapter comparing how similarly/differently Japan and India are developing their space programmes, how they are likely to proceed in the future, and what impact the programmes have had in their own region and what they have contributed so far to global space research.

USE Efficiency: an innovative educational programme for energy efficiency in buildings

NASA Astrophysics Data System (ADS)

Papadopoulos, Theofilos A.; Christoforidis, Georgios C.; Papagiannis, Grigoris K.

2017-10-01

Power engineers are expected to play a pivotal role in transforming buildings into smart and energy-efficient structures, which is necessary since buildings are responsible for a considerable amount of the total energy consumption. To fulfil this role, a holistic approach in education is required, tackling subjects traditionally related to other engineering disciplines. In this context, USE Efficiency is an inter-institutional and interdisciplinary educational programme implemented in nine European Universities targeting energy efficiency in buildings. The educational programme effectively links professors, students, engineers and industry experts, creating a unique learning environment. The scope of the paper is to present the methodology and the general framework followed in the USE Efficiency programme. The proposed methodology can be adopted for the design and implementation of educational programmes on energy efficiency and sustainable development in higher education. End-of-course survey results showed positive feedback from the participating students, indicating the success of the programme.

Towards an Online Bachelor of Information Science Degree Programme in a Nigerian University: Part 1--Lessons from the Literature and Existing Curricula

ERIC Educational Resources Information Center

Ajiferuke, Isola; Tiamiyu, Mutawakilu; Longe, Folake; Nwagwu, Williams; Ogunsola, Kemi; Opesade, Adeola; Olatokun, Wole

2012-01-01

Training programmes for the information professions worldwide have been shifting and diversifying the scope of their claimed domains and curricula in order to empower their graduates with diverse knowledge and versatile technical skills required to compete successfully in the highly competitive job markets in the information industries. In line…

Assessment for Learning: Capturing the Interest of Diverse Students on an Academic Writing Module in Postgraduate Vocational Education

ERIC Educational Resources Information Center

Strauss, P.; Mooney, S.

2017-01-01

This article discusses the complexities surrounding the teaching of a critical thinking and academic writing module on a vocational postgraduate programme. Students enrolled on this programme are strongly industry focused and often fail to see the relevance of such a module, despite the fact that most are international students with English as…

76 FR 70423 - Procurement List Proposed Additions

Federal Register 2010, 2011, 2012, 2013, 2014

2011-11-14

..., Joint Base Andrews Naval Air Facility Washington, 1500 West Perimeter Road, Suite 2780, Joint Base Andrews, MD. NPA: Blind Industries & Services of Maryland, Baltimore, MD, Contracting Activity: Dept of the Air Force, FA2860 11 Cons Lgc, Andrews AFB, MD. Patricia Briscoe, Deputy Director, Business...

Industrial Work Placement in Higher Education: A Study of Civil Engineering Student Engagement

ERIC Educational Resources Information Center

Tennant, Stuart; Murray, Mike; Gilmour, Bob; Brown, Linda

2018-01-01

For civil engineering undergraduates, short-term industrial work placement provides an invaluable learning experience. Notwithstanding the near-universal endorsement of short-term placement programmes, the resulting experience is rarely articulated through the student voice. This article provides an analysis of 174 questionnaires returned by…

International Education: A Tertiary-Level Industry Update

ERIC Educational Resources Information Center

Naidoo, Vikash

2006-01-01

Recent developments in the international education industry are notable in three respects. First, international student mobility has more than doubled in the last two decades or so. Second, programme mobility encompassing distance education has also led to new forms of cross-border education. Third, institution mobility through such commercial…

NCC and Computers in Education.

ERIC Educational Resources Information Center

Brown, Ron L.

1982-01-01

This introduction to the work of the National Computing Centre (NCC), looks at industry/education links, the development of case studies, the use of computers in training, work in the Department of Industry - Micros in Schools Scheme, and at the Department of Education and Science-Micro-Electronics in Education Programme. (MP)

Case for Quality Assurance in ESP [English For Specific Purposes] Programmes.

ERIC Educational Resources Information Center

Tan San Yee, Christine

There is now a need, just like in industry, for quality assurance in education, for injecting systematically planned and formal processes, precise definitions, objectivity, and measurability in education. The demand for educational excellence in industry is "out there," and companies in more advanced countries are partnering educational…

Never Mind the Quality, Take a Seat!

ERIC Educational Resources Information Center

Feather, Denis

2011-01-01

This paper considers whether lecturers delivering business higher education programmes (BHEPs) in further education colleges (FECs) in the UK see education to be a production industry, or a knowledge industry. It will consider the effects of managerialism and marketisation that the UK government (and others around the world) are applying to the…

Metrology in electricity and magnetism: EURAMET activities today and tomorrow

NASA Astrophysics Data System (ADS)

Piquemal, F.; Jeckelmann, B.; Callegaro, L.; Hällström, J.; Janssen, T. J. B. M.; Melcher, J.; Rietveld, G.; Siegner, U.; Wright, P.; Zeier, M.

2017-10-01

Metrology dedicated to electricity and magnetism has changed considerably in recent years. It encompasses almost all modern scientific, industrial, and societal challenges, e.g. the revision of the International System of Units, the profound transformation of industry, changes in energy use and generation, health, and environment, as well as nanotechnologies (including graphene and 2D materials) and quantum engineering. Over the same period, driven by the globalization of worldwide trade, the Mutual Recognition Arrangement (referred to as the CIPM MRA) was set up. As a result, the regional metrology organizations (RMOs) of national metrology institutes have grown in significance. EURAMET is the European RMO and has been very prominent in developing a strategic research agenda (SRA) and has established a comprehensive research programme. This paper reviews the highlights of EURAMET in electrical metrology within the European Metrology Research Programme and its main contributions to the CIPM MRA. In 2012 EURAMET undertook an extensive roadmapping exercise for proposed activities for the next decade which will also be discussed in this paper. This work has resulted in a new SRA of the second largest European funding programme: European Metrology Programme for Innovation and Research.

Start-Up Training in Mississippi: Program Development Guide.

ERIC Educational Resources Information Center

Brooks, Kent; And Others

Due to recent industrial growth in Mississippi and the shortage of trained manpower in numerous occupations, start-up training programs have originated to provide a pretrained work force for new or expanding industry in the State. Each start-up training program is a joint effort between a new or expanding industry and a public educational…

An Analysis of Quality in the Modular Housing Industry.

DTIC Science & Technology

1991-12-01

finishing, Station 5, installs rough plumbing and applies the first coat of drywall joint compound . The unit continues to ceiling/roof setting, Station...with I joint compound and drywall or plywood plates. 3 14. Rigid waferboard, oriented strand board, or plywood is used for exterior wall sheathing to...completed and tested, the second coat of joint compound is placed, and windows and doors are set. Insulation, exterior sheathing, roof sheathing

An assessment of the realism of digital human manikins used for simulation in ergonomics.

PubMed

Nérot, Agathe; Skalli, Wafa; Wang, Xuguang

2015-01-01

In this study, the accuracy of the joint centres of the manikins generated by RAMSIS and Human Builder (HB), two digital human modelling (DHM) systems widely used in industry for virtual ergonomics simulation, was investigated. Eighteen variously sized females and males were generated from external anthropometric dimensions and six joint centres (knee, hip and four spine joints) were compared with their anatomic locations obtained from the three-dimensional reconstructed bones from a low-dose X-ray system. Both RAMSIS and HB could correctly reproduce external anthropometric dimensions, while the estimation of internal joint centres location presented an average error of 27.6 mm for HB and 38.3 mm for RAMSIS. Differences between both manikins showed that a more realistic kinematic linkage led to better accuracy in joint location. This study opens the way to further research on the relationship between the external body geometry and internal skeleton in order to improve the realism of the internal skeleton of DHMs, especially for a biomechanical analysis requiring information of joint load and muscle force estimation. This study assessed two digital human modelling (DHM) systems widely used in industry for virtual ergonomics. Results support the need of a more realistic human modelling, especially for a biomechanical analysis and a standardisation of DHMs.

The Sines industrial complex monitoring programme: A preliminary report.

PubMed

Jones, M P; Catarino, F M; Sérgio, C; Bento-Pereira, F

1981-06-01

It is anticipated that the establishment of the industrial complex at Sines, Alentejo, Portugal, will have some impact on the environment. Details of the methods used in the monitoring programme are provided. Records of the epiphytic lichen vegetation in permanent quadrats have been made and changes shown in selected sites over a three year period are discussed. Material has been collected for analysis for heavy metals and the results discussed. There is considerable variation in replicates and in interspecies values. The problem of age and bio-accumulation is mentioned. Scanning electron microscopy has shown the accumulation of particulates, as yet unidentified, the quantity varying with increase in age and surface texture. A broadly based study of the local epiphytic flora is being carried out to record the present day diversity. There appears, as yet, to be no detectable influence of the industrial complex on the epiphytic flora of the permanent quadrats.

Absenteeism following a workplace intervention for older food industry workers.

PubMed

Siukola, A; Virtanen, P; Huhtala, H; Nygård, C-H

2011-12-01

The effects of workplace interventions on sickness absence are poorly understood, in particular in ageing workers. To analyse the effects of a senior programme on sickness absence among blue-collar food industry workers of a food company in Finland. We followed up 129 employees aged 55 years or older, who participated in a senior programme (intervention group), and 229 employees of the same age from the same company who did not participate (control group). Total sickness absence days and spells of 1-3, 4-7, 8-21 and >21 days were recorded for the members of the intervention group from the year before joining the programme and for the control group starting at age 54 years. Both groups were followed for up to 6 years. The median number of sickness absence days per person-year increased significantly from baseline in both groups during the follow-up. Compared with the control group, the intervention group had increased risk for 1-3 days spells [rate ratio 1.34 (1.21-1.48)] and 4-7 days spells [rate ratio 1.23 (1.07-1.41)], but the risk for >21 days spells was decreased [rate ratio 0.68 (0.53-0.88)] after participation in the senior programme. A programme to enhance individual work well-being in ageing workers may increase short-term but reduce long-term sickness absence.

FPGA-based multiprocessor system for injection molding control.

PubMed

Muñoz-Barron, Benigno; Morales-Velazquez, Luis; Romero-Troncoso, Rene J; Rodriguez-Donate, Carlos; Trejo-Hernandez, Miguel; Benitez-Rangel, Juan P; Osornio-Rios, Roque A

2012-10-18

The plastic industry is a very important manufacturing sector and injection molding is a widely used forming method in that industry. The contribution of this work is the development of a strategy to retrofit control of an injection molding machine based on an embedded system microprocessors sensor network on a field programmable gate array (FPGA) device. Six types of embedded processors are included in the system: a smart-sensor processor, a micro fuzzy logic controller, a programmable logic controller, a system manager, an IO processor and a communication processor. Temperature, pressure and position are controlled by the proposed system and experimentation results show its feasibility and robustness. As validation of the present work, a particular sample was successfully injected.

Building a School Leadership Programme: An American Paradox of Autonomy and Accountability

ERIC Educational Resources Information Center

Reyes-Guerra, Daniel; Russo, Marianne R.; Bogotch, Ira E.; Vásquez-Colina, Maria D.

2014-01-01

School districts within the USA face ever-decreasing autonomy in rendering decisions regarding instruction, curriculum and the leading and managing of schools at the local level due to the ever-increasing accountability measures implemented by district, state and federal governments. This study investigates a joint university-school district…

In Conversation with Paul Burstow

ERIC Educational Resources Information Center

Holman, Andrew

2013-01-01

Paul Burstow, a former minister for social care, was once charged with finding savings in care services. He completed his last two years, cut the Valuing People Now programme early, and returned to the back benches. He did, however, draft a Care and Support Bill and has subsequently used this experience to chair a joint Parliamentary Scrutiny…

"Digital Futures in Teacher Education": Exploring Open Approaches towards Digital Literacy

ERIC Educational Resources Information Center

Gruszczynska, Anna; Merchant, Guy; Pountney, Richard,

2013-01-01

This paper reports the findings of a project "Digital Futures in Teacher Education" (DeFT) undertaken as part of the third phase of the Joint Information Systems Committee (JISC) UK Open Educational Resources (OER) programme. It builds on previous work (Gruszczynska and Pountney, 2012, 2013) that has addressed attempts to embed OER…

The UK-Japan Young Scientist Workshop Programme...

ERIC Educational Resources Information Center

Albone, Eric; Okano, Toru

2012-01-01

The authors have been running UK-Japan Young Scientist Workshops at universities in Britain and Japan since 2001: for the past three years in England with Cambridge University and, last year, also with Kyoto University and Kyoto University of Education. For many years they have worked jointly with colleagues in a group of Super Science High…

Service-Oriented Architecture and Curriculum Transformation at Manchester Metropolitan University

ERIC Educational Resources Information Center

Stubbs, Mark; Range, Phil

2011-01-01

Purpose: The need to establish more flexible and adaptable university curricula has been recognised as a strategic priority in recent years and has been supported by a number of initiatives including the Curriculum Design and Delivery programme funded by the Joint Information System Committee (JISC) in the UK. The challenges of addressing…

Effective Partnership Working in Music Education: Principles and Practice

ERIC Educational Resources Information Center

Hallam, Richard

2011-01-01

Successful partnerships between policy makers and deliverers, providers and recipients can be both strategic and operational. Partnerships can operate in several different ways at the same time. Joint programmes achieve more than each organization or individual can achieve separately. The impact on children and young people can be profound if the…

Storytelling and the Web in South African Museums.

ERIC Educational Resources Information Center

Goodnow, Katherine J.; Natland, Yngvar

The Iziko museums in Cape Town, South Africa in collaboration with the International Museums Studies Programme at the University of Bergen, Norway, have jointly developed a Web-based concept that combines oral storytelling with new technology to connect schools in the South and North. Awaiting funding at the time of publication, this project was…

Embedding Community Engagement in South African Higher Education

ERIC Educational Resources Information Center

Lazarus, Josef; Erasmus, Mabel; Hendricks, Denver; Nduna, Joyce; Slamat, Jerome

2008-01-01

Community engagement was a relatively unknown concept in South African higher education until the late 1990s. In response to the call of the White Paper on the Transformation of Higher Education (1997) for "feasibility studies and pilot programmes which explore the potential of community service in higher education" the Joint Education…

32 CFR 155.2 - Applicability and scope.

Code of Federal Regulations, 2011 CFR

2011-07-01

... National Defense Department of Defense OFFICE OF THE SECRETARY OF DEFENSE SECURITY DEFENSE INDUSTRIAL... of the Secretary of Defense, the Military Departments, the Chairman of the Joint Chiefs of Staff and the Joint Staff, the Inspector General of the Department of Defense (IG, DoD), and the Defense...

32 CFR 155.2 - Applicability and scope.

Code of Federal Regulations, 2010 CFR

2010-07-01

... National Defense Department of Defense OFFICE OF THE SECRETARY OF DEFENSE SECURITY DEFENSE INDUSTRIAL... of the Secretary of Defense, the Military Departments, the Chairman of the Joint Chiefs of Staff and the Joint Staff, the Inspector General of the Department of Defense (IG, DoD), and the Defense...

32 CFR 155.2 - Applicability and scope.

Code of Federal Regulations, 2012 CFR

2012-07-01

... National Defense Department of Defense OFFICE OF THE SECRETARY OF DEFENSE SECURITY DEFENSE INDUSTRIAL... of the Secretary of Defense, the Military Departments, the Chairman of the Joint Chiefs of Staff and the Joint Staff, the Inspector General of the Department of Defense (IG, DoD), and the Defense...

32 CFR 155.2 - Applicability and scope.

Code of Federal Regulations, 2013 CFR

2013-07-01

... National Defense Department of Defense OFFICE OF THE SECRETARY OF DEFENSE SECURITY DEFENSE INDUSTRIAL... of the Secretary of Defense, the Military Departments, the Chairman of the Joint Chiefs of Staff and the Joint Staff, the Inspector General of the Department of Defense (IG, DoD), and the Defense...

Curricular Joint Ventures: A New Chapter in US Cross-Border Education?

ERIC Educational Resources Information Center

Eckel, Peter D.; Green, Madeleine F.; Affolter-Caine, Britany

2004-01-01

For universities in industrialized nations such as the United States, globalization poses relatively little threat and offers many benefits. This article identifies and describes one trend emerging from globalization--how American colleges and universities are leveraging their curricula internationally through joint ventures between universities…

Duke University: Licensing and Real Estate Joint Ventures.

ERIC Educational Resources Information Center

McDonald, Eugene J.

1984-01-01

Joint ventures undertaken by Duke University with industry are reported that illustrate the imaginative arrangements and economic and otherwise advantageous structures possible in co-ventures. They include patent and trademark licensing, travel agency commissions, a racquetball and health club, a hotel, and an office building. (MSE)

An Investigation of the Effectiveness of Work Related Learning: A Case of the Industrial Attachment Program Offered by the Faculty of Commerce, University of Zimbabwe

ERIC Educational Resources Information Center

Matamande, Wilson; Nyikahadzoi, Loveness; Taderera, Ever

2013-01-01

Industrial attachment is a very important component in the learning system particularly for tertiary and higher education as it relates to those who are pursuing careers in commerce. This paper seeks to evaluate the effectiveness of the industrial attachment programme undertaken by the University of Zimbabwe, faculty of commerce. A questionnaire…

High susceptibility and low resistance allele frequency of Chrysodeixis includens (Lepidoptera: Noctuidae) field populations to Cry1Ac in Brazil.

PubMed

Yano, Silvia Ac; Specht, Alexandre; Moscardi, Flávio; Carvalho, Renato A; Dourado, Patrick M; Martinelli, Samuel; Head, Graham P; Sosa-Gómez, Daniel R

2016-08-01

The soybean looper (SBL), Chrysodeixis includens (Walker), is one of the most important soybean pests in Brazil. MON 87701 × MON 89788 soybean expressing Cry1Ac has been recently deployed in Brazil, providing high levels of control against the primary lepidopteran pests. To support insect resistance management (IRM) programmes, the baseline susceptibility of SBL to Cry1Ac was assessed, and the resistance allele frequency was estimated on the basis of an F2 screen. The toxicity (LC50 ) of Cry1Ac ranged from 0.39 to 2.01 µg mL(-1) diet among all SBL field populations collected from crop seasons 2008/09 to 2012/13, which indicated approximately fivefold variation. Cry1Ac diagnostic concentrations of 5.6 and 18 µg mL(-1) diet were established for monitoring purposes, and no shift in mortality was observed. A total of 626 F2 family lines derived from SBL collected from locations across Brazil during crop season 2014/15 were screened for the presence of Cry1Ac resistance alleles. None of the 626 families survived on MON 87701 × MON 89788 soybean leaf tissue (joint frequency 0.0004). SBL showed high susceptibility and low resistance allele frequency to Cry1Ac across the main soybean-producing regions in Brazil. These findings meet important criteria for effective IRM strategy. © 2015 Society of Chemical Industry. © 2015 Society of Chemical Industry.

The effect of calf muscle stretching exercises on ankle joint dorsiflexion and dynamic foot pressures, force and related temporal parameters.

PubMed

Macklin, K; Healy, A; Chockalingam, N

2012-03-01

Previous research has found that ankle joint equinus can lead to foot pathologies. Calf stretching exercises are a common treatment prescription; however, no dynamic quantitative data on its effectiveness is available. To investigate the effect of calf muscle stretching on ankle joint dorsiflexion and subsequent changes within dynamic forefoot peak plantar pressures (PPP), force and temporal parameters. Thirteen runners with ankle joint equinus were required to perform calf muscle stretching twice a day (morning and evening) on a Flexeramp. Measurements were collected on day 1, week 4 and week 8. A repeated measures ANOVA with Bonferroni-adjusted post hoc comparisons was used to assess differences across the three data collection sessions. Findings indicated that the calf stretching program increased ankle joint dorsiflexion significantly (from 5° to 16°, p≤0.05). The adaptive kinetics brought about by the increased ankle joint range of motion included significantly increased forefoot PPP and maximum force during stance phase but decreased time between heel contact and heel lift and total stance phase time. The calf stretching programme used in this study was found to increase ankle joint dorsiflexion and hence can be used for first line conservative management of ankle equinus. Copyright © 2011 Elsevier Ltd. All rights reserved.

Circulating and synovial antibody profiling of juvenile arthritis patients by nucleic acid programmable protein arrays

PubMed Central

2012-01-01

Introduction Juvenile idiopathic arthritis (JIA) is a heterogeneous disease characterized by chronic joint inflammation of unknown cause in children. JIA is an autoimmune disease and small numbers of autoantibodies have been reported in JIA patients. The identification of antibody markers could improve the existing clinical management of patients. Methods A pilot study was performed on the application of a high-throughput platform, the nucleic acid programmable protein array (NAPPA), to assess the levels of antibodies present in the systemic circulation and synovial joint of a small cohort of juvenile arthritis patients. Plasma and synovial fluid from 10 JIA patients was screened for antibodies against 768 proteins on NAPPAs. Results Quantitative reproducibility of NAPPAs was demonstrated with > 0.95 intra-array and inter-array correlations. A strong correlation was also observed for the levels of antibodies between plasma and synovial fluid across the study cohort (r = 0.96). Differences in the levels of 18 antibodies were revealed between sample types across all patients. Patients were segregated into two clinical subtypes with distinct antibody signatures by unsupervised hierarchical cluster analysis. Conclusion The NAPPAs provide a high-throughput quantitatively reproducible platform to screen for disease-specific autoantibodies at the proteome level on a microscope slide. The strong correlation between the circulating antibody levels and those of the inflamed joint represents a novel finding and provides confidence to use plasma for discovery of autoantibodies in JIA, thus circumventing the challenges associated with joint aspiration. We expect that autoantibody profiling of JIA patients on NAPPAs could yield antibody markers that can act as criteria to stratify patients, predict outcomes and understand disease etiology at the molecular level. PMID:22510425

Industry self-regulation and TV advertising of foods to Australian children.

PubMed

Smithers, Lisa G; Lynch, John W; Merlin, Tracy

2014-05-01

The aim of this study is to examine the amount of non-core (unhealthy) food advertising currently on Australian television (i) during children's programmes and viewing times; (ii) since the introduction of food industry self-regulatory initiatives in 2009; and (iii) whether advertising differs according to signatory status to industry initiatives. We systematically searched PubMed, Embase.com and JSTOR (media/marketing) databases; grey literature; and reference lists of relevant articles for studies published since 2009 that reported on food advertising on Australian television. The title and abstract of 316 articles were screened, yielding 25 articles considered potentially eligible, of which eight met the pre-defined selection criteria. Meta-analysis was not possible because of temporal and methodological differences across studies. The advertising of non-core foods was found to be negligible during programmes with a C-(children's) classification but ranged from 1.5 to 6.5/h during children's peak viewing times. From 2006 to 2011, non-core food advertising decreased by 0.18 advertisements per hour every year, whereas fast food advertising increased by 0.09/h; however, these analyses are based on one study with only five time points. During children's viewing times, signatories to industry initiatives advertise non-core foods at higher rates than non-signatories. Although it is not possible to determine whether advertising has changed since the industry initiatives were introduced, signatories to the initiatives continue to advertise non-core foods at times when many children watch television. Future efforts to reduce children's exposure to food advertising should be focused on advertising during children's peak viewing times rather than by programme classifications. © 2013 The Authors. Journal of Paediatrics and Child Health © 2013 Paediatrics and Child Health Division (Royal Australasian College of Physicians).

Recreational Diving Impacts on Coral Reefs and the Adoption of Environmentally Responsible Practices within the SCUBA Diving Industry.

PubMed

Roche, Ronan C; Harvey, Chloe V; Harvey, James J; Kavanagh, Alan P; McDonald, Meaghan; Stein-Rostaing, Vivienne R; Turner, John R

2016-07-01

Recreational diving on coral reefs is an activity that has experienced rapidly growing levels of popularity and participation. Despite providing economic activity for many developing coastal communities, the potential role of dive impacts in contributing to coral reef damage is a concern at heavily dived locations. Management measures to address this issue increasingly include the introduction of programmes designed to encourage environmentally responsible practices within the dive industry. We examined diver behaviour at several important coral reef dive locations within the Philippines and assessed how diver characteristics and dive operator compliance with an environmentally responsible diving programme, known as the Green Fins approach, affected reef contacts. The role of dive supervision was assessed by recording dive guide interventions underwater, and how this was affected by dive group size. Of the 100 recreational divers followed, 88 % made contact with the reef at least once per dive, with a mean (±SE) contact rate of 0.12 ± 0.01 per min. We found evidence that the ability of dive guides to intervene and correct diver behaviour in the event of a reef contact decreases with larger diver group sizes. Divers from operators with high levels of compliance with the Green Fins programme exhibited significantly lower reef contact rates than those from dive operators with low levels of compliance. The successful implementation of environmentally responsible diving programmes, which focus on influencing dive industry operations, can contribute to the management of human impacts on coral reefs.

Perspectives of Australian nursing directors regarding educational preparation for mental health nursing practice.

PubMed

Happell, Brenda; McAllister, Margaret

2014-11-01

There is an ongoing global shortage of mental health nurses. Within Australia, the principal strategy of offering a postgraduate education programme with various incentives to encourage nurses back to study has not been successful. This has led to the consideration of radical alternatives, including the return to pre-registration specialisation in mental health. The successful introduction of this strategy would require the full support of industry partners. To date, the voice of industry has not been heard in relation to this issue. The aim of this paper is to present the views of an Australian sample of mental health nursing directors regarding the resources and other factors required, should undergraduate specialist programmes in mental health be developed, to ensure they are relevant and likely to be successful. A qualitative exploratory research project was undertaken to explore the perspectives and opinions of industry partners. In-depth interviews were conducted with nursing directors (n = 12) in Queensland Australia. Five main themes were identified: relationships with universities; clinical placement preparation and support; workplace culture; facilitators and preceptors; and practical student learning. Genuine collaboration between the two organisations was considered crucial for delivering a quality programme and providing the required support for students. Transformative leadership could inform this collaboration by promoting acknowledgement of and respect for differences.

Spanish Earth Observation Satellite System

NASA Astrophysics Data System (ADS)

Borges, A.; Cerezo, F.; Fernandez, M.; Lomba, J.; Lopez, M.; Moreno, J.; Neira, A.; Quintana, C.; Torres, J.; Trigo, R.; Urena, J.; Vega, E.; Vez, E.

2010-12-01

The Spanish Ministry of Industry, Tourism and Trade (MITyC) and the Ministry of Defense (MoD) signed an agreement in 2007 for the development of a "Spanish Earth Observation Satellite System" based, in first instance, on two satellites: a high resolution optical satellite, called SEOSAT/Ingenio, and a radar satellite based on SAR technology, called SEOSAR/Paz. SEOSAT/Ingenio is managed by MITyC through the Centre for the Development of Industrial Technology (CDTI), with technical and contractual support from the European Space Agency (ESA). HISDESA T together with the Spanish Instituto Nacional de Técnica Aeroespacial (INTA, National Institute for Aerospace Technology) will be responsible for the in-orbit operation and the commercial operation of both satellites, and for the technical management of SEOSAR/Paz on behalf of the MoD. In both cases EADS CASA Espacio (ECE) is the prime contractor leading the industrial consortia. The ground segment development will be assigned to a Spanish consortium. This system is the most important contribution of Spain to the European Programme Global Monitoring for Environment and Security, GMES. This paper presents the Spanish Earth Observation Satellite System focusing on SEOSA T/Ingenio Programme and with special emphasis in the potential contribution to the ESA Third Party Missions Programme and to the Global Monitoring for Environment and Security initiative (GMES) Data Access.

Natural products and drug discovery: a survey of stakeholders in industry and academia.

PubMed

Amirkia, Vafa; Heinrich, Michael

2015-01-01

In recent decades, natural products have undisputedly played a leading role in the development of novel medicines. Yet, trends in the pharmaceutical industry at the level of research investments indicate that natural product research is neither prioritized nor perceived as fruitful in drug discovery programmes as compared with incremental structural modifications and large volume HTS screening of synthetics. We seek to understand this phenomenon through insights from highly experienced natural product experts in industry and academia. We conducted a survey including a series of qualitative and quantitative questions related to current insights and prospective developments in natural product drug development. The survey was completed by a cross-section of 52 respondents in industry and academia. One recurrent theme is the dissonance between the perceived high potential of NP as drug leads among individuals and the survey participants' assessment of the overall industry and/or company level strategies and their success. The study's industry and academic respondents did not perceive current discovery efforts as more effective as compared with previous decades, yet industry contacts perceived higher hit rates in HTS efforts as compared with academic respondents. Surprisingly, many industry contacts were highly critical to prevalent company and industry-wide drug discovery strategies indicating a high level of dissatisfaction within the industry. These findings support the notion that there is an increasing gap in perception between the effectiveness of well established, commercially widespread drug discovery strategies between those working in industry and academic experts. This research seeks to shed light on this gap and aid in furthering natural product discovery endeavors through an analysis of current bottlenecks in industry drug discovery programmes.

Kinematics of Hooke universal joint robot wrists

NASA Technical Reports Server (NTRS)

Mckinney, William S., Jr.

1988-01-01

The singularity problem associated with wrist mechanisms commonly found on industrial manipulators can be alleviated by redesigning the wrist so that it functions as a three-axis gimbal system. This paper discussess the kinematics of gimbal robot wrists made of one and two Hooke universal joints. Derivations of the resolved rate motion control equations for the single and double Hooke universal joint wrists are presented using the three-axis gimbal system as a theoretical wrist model.

Final Environmental Assessment: For Joint Base Anacostia-Bolling Master Plan District of Columbia

DTIC Science & Technology

2010-09-30

the impacts of vehicle travel and facilitate alternative modes of transportation that would reduce air pollutants . Noise: There would be...ltlb•nKM nr~t~~G.,~ StEiiubetlls Fort McNair East Potomac Pari < Poplar Point "" Joint Base Anacostia-Bolling Master Plan Environmental...Industrial $uppon Eost Potomac Pari < Poplar Point Joint Base Anacostia-Bolling Master Plan Environmental Assessment pg. 16 Several general

Analysis of Commercially Available Firefighting Helmet and Boot Options for the Joint Firefighter Integrated Response Ensemble (JFIRE)

DTIC Science & Technology

2012-02-01

AFRL-RX-TY-TR-2012-0022 ANALYSIS OF COMMERCIALLY AVAILABLE HELMET AND BOOT OPTIONS FOR THE JOINT FIREFIGHTER INTEGRATED RESPONSE ENSEMBLE...Interim Technical Report 01-SEP-2010 -- 31-JAN-2011 Analysis of Commercially Available Firefighting Helmet and Boot Options for the Joint Firefighter...ensemble. A requirements correlation matrix was generated and sent to industry detailing objective and threshold measurements for both the helmet

"Don't Be a Smart Arse": Social Enterprise-Based Transitional Labour-Market Programmes as Neo-Liberal Technologies of the Self

ERIC Educational Resources Information Center

Kelly, Peter James; Campbell, Perri Bree Ellis; Harrison, Lyn

2015-01-01

In this paper we re-visit the work of celebrity chef Jamie Oliver and the social enterprise Fifteen Foundation and their development of a programme designed to train unemployed young people in the hospitality industry. We argue, drawing on the Foucauldian literature on governmentality and technologies of the self, that social enterprise-based…

"Mind the Gap": An Empirical Study of the Gap between Intention and Actual Usage of Corporate E-Learning Programmes in the Financial Industry

ERIC Educational Resources Information Center

Luor, Tainyi; Hu, Changya; Lu, His-Peng

2009-01-01

While numerous previous studies have focused on the use of some corporate e-learning programmes (CELP), little is known about the difference between users' pre-installation reactions to CELP and user's post-installation reactions to CELP. This study narrows the above gap with two investigations into a financial company's CELP. In the…

AGARD Engine Disc Cooperative Test Programme, Addendum, (Rapport sur le Programme d’Essais Commun des DIsques Moteur (Supplement)

DTIC Science & Technology

1993-04-01

In-, 0- Sensbtng D recteur Scieintiiquce des Stnictures Chief Enggineer for Snztrur 0I’EMA IBB, Flu~amEueFEZ 29 -me de ]a Diision Lcderc POSifad 801160...lives. industry to enhance the safe-life design of rotating engine components by including The SMP/SC.33 subcommittee appointed a damage tolerant lifing

Opportunities for international collaboration in industrial pollution prevention

DOE Office of Scientific and Technical Information (OSTI.GOV)

Young, J.K.; Fowler, K.M.

1993-08-01

The goal of this paper is to describe international research opportunities for in-process reduction of wastes from industrial processes. Written responses from 52 researchers were obtained from 15 different countries in mid-1992. Each researcher provided information about products to reduce waste in industrial processes and recommended joint activities and mechanisms for working collaboratively with the United States.

Workplace Basic Skills in the Metal Casting Industry for World Class Process and Technology.

ERIC Educational Resources Information Center

Rasmussen, Bonnie

A workplace basic skills project for the metal casting industry was established jointly by Central Alabama Community College and Robinson Foundry, Inc. Evaluation of the project was made through a commercial test of hourly workers' general literacy level gains, instructor-developed pre- and posttests of mastery of the industrial process and…

Industrial robot

NASA Astrophysics Data System (ADS)

Prakashan, A.; Mukunda, H. S.; Samuel, S. D.; Colaco, J. C.

1992-11-01

This paper addresses the design and development of a four degree of freedom industrial manipulator, with three liner axes in the positioning mechanism and one rotary axis in the orientation mechanism. The positioning mechanism joints are driven with dc servo motors fitted with incremental shaft encoders. The rotary joint of the orientation mechanism is driven by a stepping motor. The manipulator is controlled by an IBM 386 PC/AT. Microcomputer based interface cards have been developed for independent joint control. PID controllers for dc motors have been designed. Kinematic modeling, dynamic modeling, and path planning have been carried out to generate the control sequence to accomplish a given task with reference to source and destination state constraints. This project has been sponsored by the Department of Science and Technology, Government of India, New Delhi, and has been executed in collaboration with M/s Larsen & Toubro Ltd, Mysore, India.

A Conversation with Blake Simmons, Vice President, Deconstruction Division, and Jon Magnuson, Director, Fungal Biotechnology Group, Joint BioEnergy Institute, Emeryville, CA

DOE Office of Scientific and Technical Information (OSTI.GOV)

Simmons, Blake A.; Magnuson, Jon

An interview of myself and Blake Simmons conducted by Vicki Glaser, Executive Editor of Industrial Biotechnology. The subject of the interview was the relatively new PNNL led Fungal Biotechnology Group within the Joint BioEnergy Institute (JBEI).

University Research and Development Activities: The Federal Income Tax Consequences of Research Contracts, Research Subsidiaries and Joint Ventures.

ERIC Educational Resources Information Center

Kertz, Consuelo Lauda; Hasson, James K., Jr.

1986-01-01

Features of the federal income tax law applying to income received from commercially funded university-based scientific research and development activities are discussed, including: industry-sponsored research contracts, separately incorporated entities, partnerships and joint ventures, subsidiaries and unrelated income consequences of…

76 FR 2147 - UAW-Chrysler National Training Center Technology Training Joint Programs Staff, Detroit, MI; UAW...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-01-12

... Technical Training Center Technology Training Joint Programs Staff, Warren, MI; Notice of Revised... facilities. The information revealed that the technical training provided (such as applied industrial... engaged in employment related to the supply of technical training services, meet the worker group...

Enhancing Employability through Industrial Training in the Malaysian Context

ERIC Educational Resources Information Center

Pillai, Stefanie; Khan, Mahmud H.; Ibrahim, Ida Syahirah; Raphael, Sharmane

2012-01-01

This study discusses the industrial training programme at the University of Malaya in Malaysia, specifically the issues that need to be addressed in order to enhance the employability skills of graduates. Findings from the feedback obtained from trainees and organizations in the 2008/2009 academic session were examined in terms of the extent to…

Work-Based Research Degrees: Systematic Cultivation through a University-Industry Network Space

ERIC Educational Resources Information Center

Sense, Andrew J.

2016-01-01

The purpose of this paper is to expound on an innovative approach to cultivating work-based Doctorates and Masters of Philosophy degrees, which involves close collaboration between industry organisations and a tertiary institution. This paper also reports on an examination of the programme's structural ability to help develop the learning…

PICKUP Wales, U.K. Assurance of Quality Vocational Continuing Education and Training.

ERIC Educational Resources Information Center

Daniels, C. E. J.

The Professional, Industrial, and Commercial Updating Programme (PICKUP) of the United Kingdom is aimed at improving the performance of British industry through the colleges. In Wales, PICKUP is part of the Welsh Office Education Department. Various factors have encouraged educational institutions to take on PICKUP work: the Education Reform Act…

Networking Industry and Academia: Evidence from FUSION Projects in Ireland

ERIC Educational Resources Information Center

Stephens, Simon; Onofrei, George

2009-01-01

Graduate development programmes such as FUSION continue to be seen by policy makers, higher education institutions and small and medium-sized enterprises (SMEs) as primary means of strengthening higher education-business links and in turn improving the match between graduate output and the needs of industry. This paper provides evidence from case…

Producing "Industry-Ready" Doctorates: Australian Cooperative Research Centre Approaches to Doctoral Education

ERIC Educational Resources Information Center

Harman, Kay M.

2004-01-01

How the experience of science-based Ph.D. students working in or funded by Australian Cooperative Research Centres (CRCs) compares with their peers in regular university science-based departments is the key focus of this article. CRC doctoral programmes that integrate industry needs with professional development offer an alternative to traditional…

University-Industry Collaboration from a Relationship Marketing Perspective: An Empirical Analysis in a Spanish University

ERIC Educational Resources Information Center

Frasquet, Marta; Calderon, Haydee; Cervera, Amparo

2012-01-01

Building relationships between universities and industry bodies is of prime importance for creating value for universities' stakeholders. This paper focuses on relationships in relation to undergraduate internship programmes in the Social Sciences. Using the relationship marketing approach, we analyze this type of collaboration of firms with a…

Industrial Training of Construction Students: Perceptions of Training Organizations in Ghana

ERIC Educational Resources Information Center

Ayarkwa, Joshua; Adinyira, Emmanuel; Osei-Asibey, Dickson

2012-01-01

Purpose: The industrial training component in a university's curricula adds tremendous value to a degree programme by enhancing the employable skills of graduates. The purpose of this paper is to assess the perception of organisations that have trained construction students from the Department of Building Technology of the Kwame Nkrumah University…

Directory of Construction Engineering Programs in Organization and Management of Construction.

DTIC Science & Technology

1982-03-01

responses except that core courses for USA programmes do display some evidence of consistency (or popularity). This is likely due to the influence of the...Development 50 25 40 Overseeing Body , Industry Liaison 40 35 40 It is significant that USA schools obtain substantially larger participation by industry in...Curriculum Development (w< (Please tick) Scholarship,Bursaries etc.(41Overseeing Body Industry Liaison (I Comments PAGE E -2- Courtiic, Titles, Bvsurlpt

Corporate ergonomics programme at Ford Motor Company.

PubMed

Joseph, Bradley S

2003-01-01

The use of ergonomic principles in automobile assembly and manufacturing operations has become an important part of a comprehensive health and safety process as well as an integral part of the engineering systems. Ford Motor Company has developed an ergonomics process to manage issues related to injury and illness (e.g., musculoskeletal diseases) and to ensure the appropriate use of human resources on the plant floor. The ergonomics programme uses joint labour and management teams to identify and evaluate jobs and develop and implement solutions. This paper summarises the efforts of the Ford Motor Company in implementing and maintaining the programme. Key strategies are outlined that provide important links to internal organisational units that are critical to fully utilise the ergonomics process. In addition, the paper outlines differences between proactive and reactive efforts and shows the importance of using the information generated by the initiatives for process improvement.

A compact roller-gear pitch-yaw joint module: Design and control issues

NASA Technical Reports Server (NTRS)

Dohring, Mark E.; Anderson, William J.; Newman, Wyatt S.; Rohn, Douglas A.

1993-01-01

Robotic systems have been proposed as a means of accomplishing assembly and maintenance tasks in space. The desirable characteristics of these systems include compact size, low mass, high load capacity, and programmable compliance to improve assembly performance. In addition, the mechanical system must transmit power in such a way as to allow high performance control of the system. Efficiency, linearity, low backlash, low torque ripple, and low friction are all desirable characteristics. This work presents a pitch-yaw joint module designed and built to address these issues. Its effectiveness as a two degree-of-freedom manipulator using natural admittance control, a method of force control, is demonstrated.

"Who Is Helsinki" Sex Workers Advise Improving Communication for Good Participatory Practice in Clinical Trials

ERIC Educational Resources Information Center

Ditmore, Melissa Hope; Allman, Dan

2011-01-01

After premature closures in 2004 of biomedical human immunodeficiency virus (HIV) prevention trials involving sex workers in Africa and Asia, the Joint United Nations Programme on HIV/AIDS (UNAIDS) and Global Advocacy for HIV Prevention (AVAC) undertook consultations to establish better participatory guidelines for such trials in order to address…

Blended Learning in MBA Education: A Cross-Cultural Experiment

ERIC Educational Resources Information Center

Magnier-Watanabe, Remy; Benton, Caroline; Herrig, Harald; Aba, Olivier

2011-01-01

e-Learning has entered the mainstream in higher education and many institutions are implementing technology-mediated learning at some level. This paper outlines the case of a course taught jointly in 2010 over three months by two graduate programmes in management at the University of Tsukuba in Japan and the Grenoble Ecole de Management in France…

Critical Friendship as a Contribution to Master's-Level Work in an International Programme of Study

ERIC Educational Resources Information Center

van Swet, Jacqueline; Smit, Ben H. J.; Corvers, Louise; van Dijk, Ineke

2009-01-01

This article reports on an action research project in which the value of critical friendship for students doing research and writing their dissertations within an international master's course has been explored. This course is run jointly by Roehampton University (London, UK), Charles University (Prague, Czech Republic) together with Fontys OSO…

Innovations in Equipping EYL Teachers for Future Challenges: UUM TEYL Perspective

ERIC Educational Resources Information Center

Karim, Hamida Bee Bi Abdul; Yusof, Fahainis Mohd.

2012-01-01

This paper seeks to highlight perceptions of students undergoing the Teaching of English to Young Learners (TEYL) programme jointly run by UUM and KPM since 2004. It focuses on their level of satisfaction from both academic amid non-academic aspects, particularly on the effectiveness of teaching methods employed by both local and international…

Measuring the Success of Facilitated Engagement between Knowledge Producers and Users: A Validated Scale

ERIC Educational Resources Information Center

Dwan, Kathryn Madonna; McInnes, Peter; Mazumdar, Soumya

2015-01-01

Researchers are increasingly being asked to demonstrate the impact of their research on policy. Unfortunately, evidence on what works is scarce because it is rarely reported and evaluated. This paper describes a programme of facilitated engagement between knowledge producers and users on topics of joint research and policy interest, and validates…

Building the Future Students' Blended Learning Experiences from Current Research Findings

ERIC Educational Resources Information Center

Jefferies, Amanda; Hyde, Ruth

2010-01-01

Between March 2007 and February 2009, the Joint Information Systems Committee (JISC) funded a Learners Journeys project at the University of Hertfordshire. This was part of their second phase of investment in research into the Learners' Experiences through their E-Learning Programme and was known as LXP2. STROLL (STudent Reflections On Lifelong…

Merging perspectives in the catchment sciences: the US-Japan Joint Seminar on catchment hydrology and forest biogeochemistry

Treesearch

Kevin J. McGuire; Stephen D. Sebestyen; Nobuhito Ohte; Emily M. Elliott; Takashi Gomi; Mark B. Green; Brian L. McGlynn; Naoko Tokuchi

2014-01-01

Japan has strong research programmes in the catchment sciences that overlap with interests in the US catchment science community, particularly in experimental and field-based research. Historically, however, there has been limited interaction between these two hydrologic science communities because of differences in language, culture, and research approaches. These...

The Mobile Learning Network: Getting Serious about Games Technologies for Learning

ERIC Educational Resources Information Center

Petley, Rebecca; Parker, Guy; Attewell, Jill

2011-01-01

The Mobile Learning Network currently in its third year, is a unique collaborative initiative encouraging and enabling the introduction of mobile learning in English post-14 education. The programme, funded jointly by the Learning and Skills Council and participating colleges and schools and supported by LSN has involved nearly 40,000 learners and…

An Analytical Evaluation of Contingency Contracting Operations in Iraq and Afghanistan: Capturing Critical Corporate Knowledge for the Future

DTIC Science & Technology

2012-12-01

Makeup for the CASO (After Deputy Assistant Secretary of Defense for Manufacturing and Industrial Base, n.d., p. 7) .......73  xiv Figure 26.  JCASO...Augmentation Program CAP Crisis Action Planning CASO Contingency Acquisition Support Office CBP Capability-Based Planning CCAS Contingency...enhance joint doctrine; 69  Develop and refine joint non-acquisition OCS training and education and ensure its inclusion in joint exercises;  Identify

Joint Base Contracting: A Comparative Analysis of Joint Base Contracting Activities between Services

DTIC Science & Technology

2011-12-01

INTENTIONALLY LEFT BLANK 1 I. INTRODUCTION A. OVERVIEW The idea of consolidating functions is not new in the corporate world, nor is it new in...combining the experience and skill of multiple organizations to improve corporate knowledge. The automobile industry has several examples of joint...objective process, no more than half of the Commission’s professional staff members could have worked for the DoD during the same year that they were a

Thinking differently: working together for better care.

PubMed

Bolton, Patrick; Crilly, Hilary; Rivas, Ketty

2015-06-01

This paper describes the development and outcomes from 'joint working' between Prince of Wales Hospital and BD (Becton, Dickinson and Company) in Australia. 'Joint working' is a term used within the English National Health Service to describe health system and industry partners working together to create novel service models which benefit patients. The joint working process broadened the perspective of both parties through learning from each other and so enhanced the range of tools they each bring to their work.

Impact of transgene genome location on gene migration from herbicide-resistant wheat (Triticum aestivum L.) to jointed goatgrass (Aegilops cylindrica Host).

PubMed

Rehman, Maqsood; Hansen, Jennifer L; Mallory-Smith, Carol A; Zemetra, Robert S

2017-08-01

Wheat (Triticum aestivum) (ABD) and jointed goatgrass (Aegilops cylindrica) (CD) can cross and produce hybrids that can backcross to either parent. Such backcrosses can result in progeny with chromosomes and/or chromosome segments retained from wheat. Thus, a herbicide resistance gene could migrate from wheat to jointed goatgrass. In theory, the risk of gene migration from herbicide-resistant wheat to jointed goatgrass is more likely if the gene is located on the D genome and less likely if the gene is located on the A or B genome of wheat. BC 1 populations (jointed goatgrass as a recurrent parent) were analyzed for chromosome numbers and transgene transmission rates under sprayed and non-sprayed conditions. Transgene retention in the non-sprayed BC 1 generation for the A, B and D genomes was 84, 60 and 64% respectively. In the sprayed populations, the retention was 81, 59 and 74% respectively. The gene transmission rates were higher than the expected 50% or less under sprayed and non-sprayed conditions, possibly owing to meiotic chromosome restitution and/or chromosome non-disjunction. Such high transmission rates in the BC 1 generation negates the benefits of gene placement for reducing the potential of gene migration from wheat to jointed goatgrass. © 2016 Society of Chemical Industry. © 2016 Society of Chemical Industry.

FPGA-Based Multiprocessor System for Injection Molding Control

PubMed Central

Muñoz-Barron, Benigno; Morales-Velazquez, Luis; Romero-Troncoso, Rene J.; Rodriguez-Donate, Carlos; Trejo-Hernandez, Miguel; Benitez-Rangel, Juan P.; Osornio-Rios, Roque A.

2012-01-01

The plastic industry is a very important manufacturing sector and injection molding is a widely used forming method in that industry. The contribution of this work is the development of a strategy to retrofit control of an injection molding machine based on an embedded system microprocessors sensor network on a field programmable gate array (FPGA) device. Six types of embedded processors are included in the system: a smart-sensor processor, a micro fuzzy logic controller, a programmable logic controller, a system manager, an IO processor and a communication processor. Temperature, pressure and position are controlled by the proposed system and experimentation results show its feasibility and robustness. As validation of the present work, a particular sample was successfully injected. PMID:23202036

Risk management and lessons learned solutions for satellite product assurance

NASA Astrophysics Data System (ADS)

Larrère, Jean-Luc

2004-08-01

The historic trend of the space industry towards lower cost programmes and more generally a better economic efficiency raises a difficult question to the quality assurance community: how to achieve the same—or better—mission success rate while drastically reducing the cost of programmes, hence the cost and level of quality assurance activities. EADS Astrium Earth Observation and Science (France) Business Unit have experimented Risk Management and Lessons Learned on their satellite programmes to achieve this goal. Risk analysis and management are deployed from the programme proposal phase through the development and operations phases. Results of the analysis and the corresponding risk mitigation actions are used to tailor the product assurance programme and activities. Lessons learned have been deployed as a systematic process to collect positive and negative experience from past and on-going programmes and feed them into new programmes. Monitoring and justification of their implementation in programmes is done under supervision from the BU quality assurance function. Control of the system is ensured by the company internal review system. Deployment of these methods has shown that the quality assurance function becomes more integrated in the programme team and development process and that its tasks gain focus and efficiency while minimising the risks associated with new space programmes.

Lot quality assurance sampling techniques in health surveys in developing countries: advantages and current constraints.

PubMed

Lanata, C F; Black, R E

1991-01-01

Traditional survey methods, which are generally costly and time-consuming, usually provide information at the regional or national level only. The utilization of lot quality assurance sampling (LQAS) methodology, developed in industry for quality control, makes it possible to use small sample sizes when conducting surveys in small geographical or population-based areas (lots). This article describes the practical use of LQAS for conducting health surveys to monitor health programmes in developing countries. Following a brief description of the method, the article explains how to build a sample frame and conduct the sampling to apply LQAS under field conditions. A detailed description of the procedure for selecting a sampling unit to monitor the health programme and a sample size is given. The sampling schemes utilizing LQAS applicable to health surveys, such as simple- and double-sampling schemes, are discussed. The interpretation of the survey results and the planning of subsequent rounds of LQAS surveys are also discussed. When describing the applicability of LQAS in health surveys in developing countries, the article considers current limitations for its use by health planners in charge of health programmes, and suggests ways to overcome these limitations through future research. It is hoped that with increasing attention being given to industrial sampling plans in general, and LQAS in particular, their utilization to monitor health programmes will provide health planners in developing countries with powerful techniques to help them achieve their health programme targets.

75 FR 24892 - Certain Coated Paper Suitable for High-Quality Print Graphics Using Sheet-Fed Presses From the...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-05-06

... Industry Support Calculation Coated Paper Suitable For High-Quality Print Graphics Using Sheet-Fed Presses... employs an industry-wide test to determine whether, under section 773(c)(1)(B), available information in... sections 771(33)(E) and (F) of the Act. In addition, we find that Shandong Sun Paper Industry Joint Stock...

JPRS Report, East Europe

DTIC Science & Technology

1987-09-04

representatives of the Youth Office under the Office of the Council of Ministers, directors of youth organizations, LOK, OHP [Volunteer Labor...Budapest NEPSZABADSAG in Hungarian 27 Jun 87 p 3 [Article by State Secretary Miklos Villanyi, Ministry of Agriculture and the Food Industry ( MEM ...and industrial opportunities, the MEM , in coopera- tion with the Ministry of Industry created a joint organization. The purpose of this

Research Interactions between Industry and Higher-Education: An Examination of the Major Legal Issues Involved in Four Representative Contracts.

ERIC Educational Resources Information Center

Reams, Bernard Dinsmore

The use of complex research agreements for joint research activities between industry and universities is assessed, with attention to the legal rights of the contracting parties. The focus is research relationships between a university and a company or an individual scientist and industry. The historical development and legal foundation of…

Towards an Online Bachelor of Information Science Degree Programme in a Nigerian University: Part 2--Lessons from a Market Survey

ERIC Educational Resources Information Center

Tiamiyu, Mutawakilu; Ajiferuke, Isola; Longe, Folake; Nwagwu, Williams; Ogunsola, Kemi; Opesade, Adeola; Olatokun, Wole

2012-01-01

This is the second of two articles that reports aspects of a study that was undertaken to assess the information industry and job market needs that the curriculum of the proposed programme must target. The first article specified the research problem and objectives, reviewed some key definitions and methodologies that were used, and the findings,…

[Research on contribution decomposition by industry to China's carbon intensity reduction and carbon emission growth].

PubMed

Jiang, Jing-Jing; Ye, Bin; Ji, Jun-Ping; Ma, Xiao-Ming

2014-11-01

The binding carbon intensity index and the pilot "cap-and-trade" emission trading scheme are two important approaches currently applied by China to mitigate its greenhouse gases emissions. It is of great significance to research the influence mechanism of related factors by industry on the dynamics of national carbon intensity and emission, not only for setting industry-specified intensity reduction target but also for setting industry coverage of the ETS. Two LMDI models were applied in this paper to decompose industry contributions to the changes of China's carbon intensity and carbon emission during the period of 1996-2010. Empirical results showed that: The decline of national carbon intensity was jointly determined by the changes of carbon intensities and the added value proportions of all industries, and the impact of industry carbon intensities was larger. The increase of national carbon emission was jointly determined by the changes of carbon intensities and the added value of all industries. The former had inhibitory effect whist the latter had decisive promoting effect. The five industries making the largest contribution to the changes of national carbon emission and carbon intensity included industries of electricity, nonmetal mineral, ferrous metal, transportation service, chemical materials, which were followed by the industries of agriculture, coal mining and processing, petroleum and natural gas extraction. Petroleum refining and coking industry and construction industry made small contribution to the decline of national carbon intensity, but made large contribution to the growth of national carbon emission. The contributions of service industries to national carbon emission growth showed a rising trend, especially those of transportation service industry, wholesaling, retailing and catering service industry.

Sustainability and integration of radioecology-position paper.

PubMed

Muikku, M; Beresford, N A; Garnier-Laplace, J; Real, A; Sirkka, L; Thorne, M; Vandenhove, H; Willrodt, C

2018-03-01

This position paper gives an overview of how the COMET project (COordination and iMplementation of a pan-European instrumenT for radioecology, a combined Collaborative Project and Coordination and Support Action under the EC/Euratom 7th Framework Programme) contributed to the integration and sustainability of radioecology in Europe via its support to and interaction with the European Radioecology ALLIANCE. COMET built upon the foundations laid by the FP7 project STAR (Strategic Network for Integrating Radioecology) Network of Excellence in radioecology. In close association with the ALLIANCE, and based on the Strategic Research Agenda (SRA), COMET developed innovative mechanisms for joint programming and implementation of radioecological research. To facilitate and foster future integration under a common federating structure, research activities developed within COMET were targeted at radioecological research needs identified in the SRA. Furthermore, COMET maintained and developed strong mechanisms for knowledge exchange, dissemination and training to enhance and maintain European capacity, competence and skills in radioecology. In the short term the work to promote radioecology will continue under the H2020 project EJP-CONCERT (European Joint Programme for the Integration of Radiation Protection Research). The EJP-CONCERT project (2015-2020) aims to develop a sustainable structure for promoting and administering joint programming and open research calls in the field of radiation protection research for Europe. In the longer term, radioecological research will be facilitated by the ALLIANCE. External funding is, however, required in order to be able to answer emerging research needs.

Increasing hip and knee flexion during a drop-jump task reduces tibiofemoral shear and compressive forces: implications for ACL injury prevention training.

PubMed

Tsai, Liang-Ching; Ko, Yi-An; Hammond, Kyle E; Xerogeanes, John W; Warren, Gordon L; Powers, Christopher M

2017-12-01

Although most ACL injury prevention programmes encourage greater hip and knee flexion during landing, it remains unknown how this technique influences tibiofemoral joint forces. We examined whether a landing strategy utilising greater hip and knee flexion decreases tibiofemoral anterior shear and compression. Twelve healthy women (25.9 ± 3.5 years) performed a drop-jump task before and after a training session (10-15 min) that emphasised greater hip and knee flexion. Peak tibiofemoral anterior shear and compressive forces were calculated using an electromyography (EMG)-driven knee model that incorporated joint kinematics, EMG and participant-specific muscle volumes and patella tendon orientation measured using magnetic resonance imaging (MRI). Participants demonstrated a decrease in peak anterior tibial shear forces (11.1 ± 3.3 vs. 9.6 ± 2.7 N · kg -1 ; P = 0.008) and peak tibiofemoral compressive forces (68.4 ± 7.6 vs. 62.0 ± 5.5 N · kg -1 ; P = 0.015) post-training. The decreased peak anterior tibial shear was accompanied by a decrease in the quadriceps anterior shear force, while the decreased peak compressive force was accompanied by decreased ground reaction force and hamstring forces. Our data provide justification for injury prevention programmes that encourage greater hip and knee flexion during landing to reduce tibiofemoral joint loading.

Thirty years of European biotechnology programmes: from biomolecular engineering to the bioeconomy.

PubMed

Aguilar, Alfredo; Magnien, Etienne; Thomas, Daniel

2013-06-25

This article traces back thirty years of biotechnology research sponsored by the European Union (EU). It outlines the crucial role played by De Nettancourt, Goffeau and Van Hoeck to promote and prepare the first European programme on biotechnology (1982-1986) run by the European Commission. Following this first biotechnology programme, others followed until the current one, part of the seventh Framework Programme for Research, Technological Development and Demonstration (2007-2013) (FP7). Particular attention is given to the statutory role of the European institutions in the design and orientation of the successive biotechnology programmes, compared to the more informal-yet visionary-role of key individuals upstream to any legislative decision. Examples of success stories and of the role of the biotechnology programmes in addressing societal issues and industrial competitiveness are also presented. Finally, an outline of Horizon 2020, the successor of FP7, is described, together with the role of biotechnology in building the bioeconomy. Copyright © 2012 Elsevier B.V. All rights reserved.

Public health nutrition capacity: assuring the quality of workforce preparation for scaling up nutrition programmes.

PubMed

Shrimpton, Roger; du Plessis, Lisanne M; Delisle, Hélène; Blaney, Sonia; Atwood, Stephen J; Sanders, David; Margetts, Barrie; Hughes, Roger

2016-08-01

To describe why and how capacity-building systems for scaling up nutrition programmes should be constructed in low- and middle-income countries (LMIC). Position paper with task force recommendations based on literature review and joint experience of global nutrition programmes, public health nutrition (PHN) workforce size, organization, and pre-service and in-service training. The review is global but the recommendations are made for LMIC scaling up multisectoral nutrition programmes. The multitude of PHN workers, be they in the health, agriculture, education, social welfare, or water and sanitation sector, as well as the community workers who ensure outreach and coverage of nutrition-specific and -sensitive interventions. Overnutrition and undernutrition problems affect at least half of the global population, especially those in LMIC. Programme guidance exists for undernutrition and overnutrition, and priority for scaling up multisectoral programmes for tackling undernutrition in LMIC is growing. Guidance on how to organize and scale up such programmes is scarce however, and estimates of existing PHN workforce numbers - although poor - suggest they are also inadequate. Pre-service nutrition training for a PHN workforce is mostly clinical and/or food science oriented and in-service nutrition training is largely restricted to infant and young child nutrition. Unless increased priority and funding is given to building capacity for scaling up nutrition programmes in LMIC, maternal and child undernutrition rates are likely to remain high and nutrition-related non-communicable diseases to escalate. A hybrid distance learning model for PHN workforce managers' in-service training is urgently needed in LMIC.

School food, politics and child health.

PubMed

Bundy, Donald A P; Drake, Lesley J; Burbano, Carmen

2013-06-01

An analysis undertaken jointly in 2009 by the UN World Food Programme, The Partnership for Child Development and the World Bank was published as Rethinking School Feeding to provide guidance on how to develop and implement effective school feeding programmes as a productive safety net and as part of the efforts to achieve Education for All. The present paper reflects on how understanding of school feeding has changed since that analysis. Data on school feeding programme outcomes were collected through a literature review. Regression models were used to analyse relationships between school feeding costs (from data that were collected), the per capita costs of primary education and Gross Domestic Product per capita. Data on the transition to national ownership, supply chains and country examples were collected through country case studies. School feeding programmes increase school attendance, cognition and educational achievement, as well as provide a transfer of resources to households with possible benefits to local agricultural production and local market development. Low-income countries exhibit large variations in school feeding costs, with concomitant opportunities for cost containment. Countries are increasingly looking to transition from externally supported projects to national programmes. School feeding is now clearly evident as a major social programme in most countries with a global turnover in excess of $US 100 billion. This argues for a continuing focus on the evidence base with a view to helping countries ensure that their programmes are as cost-effective as possible. Clear policy advice has never been more important.

Eco-Driven Chemical Research in the Boundary between Academia and Industry

ERIC Educational Resources Information Center

Sjöström, Jesper

2013-01-01

This paper examines and discusses the views on science and society held among PhD students working in two different industrially and environmentally driven research programmes in the broad area of green chemistry. It is based on thirteen in-depth interviews. The analysis shows three main ways of handling the situation as "post-academic"…

Pedagogical Approaches to Cooperative Education in South Africa: A Work-Integrated Learning Model for the Public Relations Industry

ERIC Educational Resources Information Center

Rampersad, Renitha

2010-01-01

The pedagogy relevant to work-integrated learning (WIL) has formed a significant component of most educational processes and has become a necessity for the public relations industry in South Africa. Properly planned, designed and monitored programmes expose students to professional culture and workplace practice. This paper outlines the pedagogy…

Industrial Training Programmes of Polytechnics in Ghana: The Pertinent Issues

ERIC Educational Resources Information Center

Nduro, Kwabena; Anderson, Isaac Kofi; Peprah, James Adu; Twenefour, Frank B. K.

2015-01-01

In today's world of stiff competition in the labour market, coupled with advanced technology, industries require of students to have job experience before employing them. The challenge here is that the experience being required is not taught in the lecture rooms. The reality is that, it is only gained though hands on the job, thus real world…

"'Lad" Research, the Reproduction of Stereotypes? Ethnographic Dilemmas When Researching Boys from Working-Class Backgrounds

ERIC Educational Resources Information Center

Rosvall, Per-Åke

2015-01-01

Previous research presented in this journal and elsewhere has suggested that vocational education is highly gender segregated and it is the heavy industrial sectors such as industry, vehicle and construction programmes that mainly attract boys with an anti-school attitude who are not interested in academic school work. However, there are good…

Frequency and distribution of the brown rust resistance gene Bru1 and implications for the Louisiana sugarcane breeding programme

USDA-ARS?s Scientific Manuscript database

Brown rust, caused by the fungus Puccinia melanocephala, is an important disease of sugarcane posing an increasing threat to sugarcane industries worldwide. A major gene, Bru1, has been shown to contribute a significant proportion of brown rust resistance in multiple sugarcane industries. The recent...

Assessing the Higher National Diploma Chemical Engineering Programme in Ghana: Students' Perspective

ERIC Educational Resources Information Center

Boateng, Cyril D.; Bensah, Edem Cudjoe; Ahiekpor, Julius C.

2012-01-01

Chemical engineers have played key roles in the growth of the chemical and allied industries in Ghana but indigenous industries that have traditionally been the domain of the informal sector need to be migrated to the formal sector through the entrepreneurship and innovation of chemical engineers. The Higher National Diploma Chemical Engineering…

Training in the Food and Beverages Sector in Ireland. Report for the FORCE Programme. First Edition.

ERIC Educational Resources Information Center

Hunt, Deirdre; And Others

The food and beverage industry is of overwhelming strategic importance to the Irish economy. It is also one of the fastest changing sectors. Recent trends in this largely indigenous industry in recent years include the following: globalization, large and accelerating capital outlay, company consolidation, added value product, enhanced quality…

The European space exploration programme: current status of ESA's plans for Moon and Mars exploration.

PubMed

Messina, Piero; Vennemann, Dietrich

2005-01-01

After a large consultation with the scientific and industrial communities in Europe, the Aurora Space Exploration Programme was unanimously approved at the European Space Agency (ESA) Council at ministerial level in Edinburgh in 2001. This marked the start of the programme's preparation phase that was due to finish by the end of 2004. Aurora features technology development robotic and crewed rehearsal missions aimed at preparing a human mission to Mars by 2033. Due to the evolving context, both international and European, ESA has undertaken a review of the goals and approach of its exploration programme. While maintaining the main robotic missions that had been conceived during Aurora, the European Space Exploration Programme that is currently being proposed to the Aurora participating states and other ESA Member States has a reviewed approach and will feature a greater synergy with other ESA programmes. The paper will present the process that led to the revision of ESA's plans in the field of exploration and will give the current status of the programme. c2005 Published by Elsevier Ltd.

High Performance Computing for Medical Image Interpretation

DTIC Science & Technology

1993-10-01

programme for some key companies in the health care industries (Dumay et al., (1993)). With the modules developed for the "Smart Surgeon" an anatomical model...Interpretation System" (HIPMI 2S) geoft FEL-TNO do mogelijkheid omn haar expertise amn to bieden amn do Nederlandse, en Europese civiole medische industrie ...Spin-off 23 3 HIGH PERFORMANCE COMPUTING 24 3.1 Introduction 24 3.2 Parallel processing 24 3.3 Artificial Neural Networks 25 3.4 European Industry

Open IoT Ecosystem for Enhanced Interoperability in Smart Cities-Example of Métropole De Lyon.

PubMed

Robert, Jérémy; Kubler, Sylvain; Kolbe, Niklas; Cerioni, Alessandro; Gastaud, Emmanuel; Främling, Kary

2017-12-08

The Internet of Things (IoT) has promised a future where everything gets connected. Unfortunately, building a single global ecosystem of Things that communicate with each other seamlessly is virtually impossible today. The reason is that the IoT is essentially a collection of isolated "Intranets of Things", also referred to as "vertical silos", which cannot easily and efficiently interact with each other. Smart cities are perhaps the most striking examples of this problem since they comprise a wide range of stakeholders and service providers who must work together, including urban planners, financial organisations, public and private service providers, telecommunication providers, industries, citizens, and so forth. Within this context, the contribution of this paper is threefold: (i) discuss business and technological implications as well as challenges of creating successful open innovation ecosystems, (ii) present the technological building blocks underlying an IoT ecosystem developed in the framework of the EU Horizon 2020 programme, (iii) present a smart city pilot (Heat Wave Mitigation in Métropole de Lyon ) for which the proposed ecosystem significantly contributes to improving interoperability between a number of system components, and reducing regulatory barriers for joint service co-creation practices.

Open IoT Ecosystem for Enhanced Interoperability in Smart Cities—Example of Métropole De Lyon

PubMed Central

Robert, Jérémy; Kolbe, Niklas; Cerioni, Alessandro; Gastaud, Emmanuel

2017-01-01

The Internet of Things (IoT) has promised a future where everything gets connected. Unfortunately, building a single global ecosystem of Things that communicate with each other seamlessly is virtually impossible today. The reason is that the IoT is essentially a collection of isolated “Intranets of Things”, also referred to as “vertical silos”, which cannot easily and efficiently interact with each other. Smart cities are perhaps the most striking examples of this problem since they comprise a wide range of stakeholders and service providers who must work together, including urban planners, financial organisations, public and private service providers, telecommunication providers, industries, citizens, and so forth. Within this context, the contribution of this paper is threefold: (i) discuss business and technological implications as well as challenges of creating successful open innovation ecosystems, (ii) present the technological building blocks underlying an IoT ecosystem developed in the framework of the EU Horizon 2020 programme, (iii) present a smart city pilot (Heat Wave Mitigation in Métropole de Lyon) for which the proposed ecosystem significantly contributes to improving interoperability between a number of system components, and reducing regulatory barriers for joint service co-creation practices. PMID:29292719

Relationship between morbidity and extreme values of body mass index in adolescents.

PubMed

Lusky, A; Barell, V; Lubin, F; Kaplan, G; Layani, V; Shohat, Z; Lev, B; Wiener, M

1996-08-01

Although the association between overweight and cardiovascular risk factors is well documented in cross-sectional and longitudinal studies, reports of adolescent morbidity associated with underweight in industrialized countries are rare. This population-based study includes approximately 110,000 17 year old Israeli Jewish males who underwent routine physical examination at army induction centres. Computerized data tapes include overall health profiles, specification of physical and mental conditions, and height and weight measurements. Medically significant conditions are those with sufficient severity to preclude service in a combat unit. Functional limitation is more prevalent at both extremes of the body mass index (BMI) distribution: 149.5/1000 among severely underweight individuals and 164.3/1000 among severely overweight subjects. Overweight was associated with hypertension (14.9/1000 among the severely overweight), as well as joint conditions of the lower extremities, mainly hip, ankle and knee disorders. Functional disorders associated with underweight are bronchial and lung conditions, including asthma (14.2 and 18.9/1000 in the mildly and severely underweight), scoliosis, intestinal conditions and emotional disorders (mainly neurosis). Both under- and overweight are associated with morbidity at age 17. Intervention programmes should begin at an early age.

Travel Health Advisory Group: a joint travel industry and travel health Special Interest Group promoting healthy travel in Australia.

PubMed

Leggat, Peter A; Zwar, Nicholas; Hudson, Bernie

2012-09-01

The Travel Health Advisory Group (THAG), established in 1997, is a joint initiative between the travel industry and travel health professionals in Australia that aims to promote healthy travel. THAG seeks to promote cooperation in improving the health of travellers between the travel industry and travel medicine professionals and to raise public awareness of the importance of travel health. From 2011, THAG has been a Special Interest Group of The Australasian College of Tropical Medicine and its membership has been active in several areas, including web-based travel health information, travel health promotion, media releases, research and education in Australia. Information is given on the objectives, membership and an overview of the various activities of the group. Copyright © 2012 Elsevier Ltd. All rights reserved.

Comparison of Joint Loading in Badminton Lunging between Professional and Amateur Badminton Players

PubMed Central

Fu, Lin

2017-01-01

The knee and ankle are the two most injured joints associated with the sport of badminton. This study evaluates biomechanical factors between professional and amateur badminton players using an injury mechanism model. The aim of this study was to investigate the kinematic motion and kinetic loading differences of the right knee and ankle while performing a maximal right lunge. Amateur players exhibited greater ankle range of motion (p < 0.05, r = 0.89) and inversion joint moment (p < 0.05, r = 0.54) in the frontal plane as well as greater internal joint rotation moment (p < 0.05, r = 0.28) in the horizontal plane. In contrast, professional badminton players presented a greater knee joint moment in the sagittal (p < 0.05, r = 0.59) and frontal (p < 0.05, r = 0.37) planes, which may be associated with increased knee ligamentous injury risk. To avoid injury, the players need to forcefully extend the knee with internal rotation, strengthen the muscles around the ankle ligament, and maximise joint coordination during training. The injuries recorded and the forces responsible for the injuries seem to have developed during training activity. Training programmes and injury prevention strategies for badminton players should account for these findings to reduce potential injury to the ankle and knee. PMID:28694684

Occupational health programme for lead workers in battery plants

NASA Astrophysics Data System (ADS)

Lee, Byung-Kook

The realization of problems resulting from the exposure to undue high lead levels of workers in lead-using industries, particularly in storage battery plants, has given rise to a new occupational health service, the so-called type specific (harmful agent specific) group occupational health. In 1988, the Korean Ministry of Labor designated the Institute of Industrial Medicine, Soonchunhyang University, as an authorized organization to take care of lead workers in lead industries. The following occupational health services are provided by the Institute: (i) physical health examination; (ii) biological monitoring with zinc protoporphyrin, urine δ-aminolevulinic acid and blood lead; (iii) respiratory protection with maintenance-free respirators; (iv) measurement of the environmental condition of workplaces; (v) health education. A three-year occupational health programme for lead workers has contributed to improvements in the working conditions of lead industries, particularly in large-scale battery plants, and has decreased the unnecessary high lead burden of workers through on-going medical surveillance with biological monitoring and health education schemes. The strong commitment of both employers and the government to improve the working conditions of lead industries, together with the full cooperation of lead workers, has served to reduce the high lead burdens of lead workers. This decreases the number of lead-poisoning cases and provides more comfortable workplaces, particularly in battery plants.

Consequences of dramatic reductions in state tobacco control funds: Florida, 1998-2000.

PubMed

Niederdeppe, J; Farrelly, M C; Hersey, J C; Davis, K C

2008-06-01

This study assessed whether dramatic funding reductions to the Florida Tobacco Control Program (FTCP) influenced trends in recall of the Florida "truth" anti-smoking media campaign, anti-industry attitudes and non-smoking intentions among Florida teens. We used an interrupted time series technique to test for differences in the rates of change in Florida "truth" recall, anti-industry beliefs and non-smoking intentions before and after the FTCP budget cuts using the Florida Anti-tobacco Media Evaluation (FAME) survey, a repeated cross-sectional telephone survey of Florida teens. Recall of the Florida "truth" anti-smoking campaign, anti-industry attitudes, and non-smoking intentions increased dramatically between April 1998 and May 1999. Florida "truth" recall declined after FTCP budget cuts in June 1999. Anti-industry beliefs and non-smoking intentions plateaued or began to decline after the budget cuts. The launch of the national "truth" campaign in February 2000 may have offset otherwise deleterious effects of the budget cuts on anti-industry beliefs, but not smoking intentions. Reductions in tobacco control funding have immediate effects on programme exposure and cognitive precursors to smoking initiation. There is a critical need to maintain and enhance funding for state tobacco control programmes to continue nationwide progress in preventing youth from initiating cigarette smoking.

Research Status on Bonding Behavior of Prefabricated Concrete Shear Wall

NASA Astrophysics Data System (ADS)

Wang, Donghui; Liu, Xudong; Wang, Sheng; Li, Shanshan

2018-03-01

Prefabricated shear wall structure adapts to the development and requirements of China’s residential industrialization. The key to the prefabricated concrete shear wall structure is the connection between the prefabricated members, where the reliability of the connection of the concrete joint is related to the overall performance and seismic effect of the structure. In this paper, the microstructures of the joint surface and shear properties are analysed, and the formula for calculating the shear strength of the joint is obtained.

The technology and welding joint properties of hybrid laser-tig welding on thick plate

NASA Astrophysics Data System (ADS)

Shenghai, Zhang; Yifu, Shen; Huijuan, Qiu

2013-06-01

The technologies of autogenous laser welding and hybrid laser-TIG welding are used on thick plate of high strength lower alloy structural steel 10CrNiMnMoV in this article. The unique advantages of hybrid laser-TIG welding is summarized by comparing and analyzing the process parameters and welding joints of autogenous laser welding laser welding and hybrid laser-TIG welding. With the optimal process parameters of hybrid welding, the good welding joint without visible flaws can be obtained and its mechanical properties are tested according to industry standards. The results show that the hybrid welding technology has certain advantages and possibility in welding thick plates. It can reduce the demands of laser power, and it is significant for lowering the aspect ratio of weld during hybrid welding, so the gas in the molten pool can rise and escape easily while welding thick plates. Therefore, the pores forming tendency decreases. At the same time, hybrid welding enhances welding speed, and optimizes the energy input. The transition and grain size of the microstructure of hybrid welding joint is better and its hardness is higher than base material. Furthermore, its tensile strength and impact toughness is as good as base material. Consequently, the hybrid welding joint can meet the industry needs completely.

Lightning Protection and Structural Bonding for the B2 Test Stand

NASA Technical Reports Server (NTRS)

Kinard, Brandon

2015-01-01

With the privatization of the space industry, NASA has entered a new era. To explore deeper parts of the solar system, NASA is developing a new spacecraft, the Space Launch System (SLS), capable of reaching these destinations, such as an asteroid or Mars. However, the test stand that is capable of testing the stage has been unused for many years. In addition to the updating/repair of the stand, more steel is being added to fully support the SLS. With all these modifications, the lightning protection system must be brought up to code to assure the protection of all personnel and assets. Structural bonding is a part of the lightning protection system. The focus of this project was to assure proper structural bonding. To begin, all relevant technical standards and the construction specifications were reviewed. This included both the specifications for the lightning protection and for general construction. The drawings were reviewed as well. From the drawings, bolted structural joints were reviewed to determine whether bonding was necessary. Several bolted joints were determined to need bonding according to the notes in the drawings. This exceeds the industry standards. The bolted joints are an electrically continuous joint. During tests, the stand experiences heavy vibration that may weaken the continuity of the bolted joint. Therefore, the secondary bonding is implemented to ensure that the structural joint has low resistance. If the structural joint has a high resistance because of corrosion, a potential gradient can occur that can cause a side flash. Damage, injury, or death can occur from a side flash so they are to be prevented. A list of the identified structural joints was compiled and sent to the contractor to be bonded. That covers the scope of this project.

Dynamic analysis of clamp band joint system subjected to axial vibration

NASA Astrophysics Data System (ADS)

Qin, Z. Y.; Yan, S. Z.; Chu, F. L.

2010-10-01

Clamp band joints are commonly used for connecting circular components together in industry. Some of the systems jointed by clamp band are subjected to dynamic load. However, very little research on the dynamic characteristics for this kind of joint can be found in the literature. In this paper, a dynamic model for clamp band joint system is developed. Contact and frictional slip between the components are accommodated in this model. Nonlinear finite element analysis is conducted to identify the model parameters. Then static experiments are carried out on a scaled model of the clamp band joint to validate the joint model. Finally, the model is adopted to study the dynamic characteristics of the clamp band joint system subjected to axial harmonic excitation and the effects of the wedge angle of the clamp band joint and the preload on the response. The model proposed in this paper can represent the nonlinearity of the clamp band joint and be used conveniently to investigate the effects of the structural and loading parameters on the dynamic characteristics of this type of joint system.

Smoking, disease, and obdurate denial: the Australian tobacco industry in the 1980s

PubMed Central

Carter, S; Chapman, S

2003-01-01

Objective: To contrast the Australian tobacco industry's awareness of the diseases caused by smoking with their aggressive public denial on the relation between smoking and disease in the 1980s. Design: Analysis of 325 industry documents from the world wide web. Results: In the 1980s Australian cigarette manufacturers were informed constantly by the international industry of the medical consensus that smoking caused disease. In addition Philip Morris (Australia) Limited received reports of Philip Morris' international biological research programme and visited its Richmond research facility; and WD&HO Wills part funded, co-managed, and contributed research to the British American Tobacco groups' biological research programme. Despite this knowledge, the Australian manufacturers had a policy of arguing to their employees, decision makers, and the general public that questions of smoking and disease were unresolved. The industry catalogued the literature, developed arguments against the main claims made by health groups, and attacked public health advocates who made statements linking smoking to death and disease. Industry studies suggested that a 20–30% minority of the Australian public agreed with the industry on smoking and disease, diminishing across the decade. Conclusion: Australian manufacturers were clearly negligent in the 1980s, deliberately working to undermine Australians' understandings of the diseases caused by smoking despite their own private knowledge. Continuing scepticism about smoking and disease, corresponding with the industry's deceptions, exists in Australian smokers today, suggesting that their actions may have slowed the rate of decline in smoking prevalence. These revelations provide important evidence for Australian litigation and advocacy. PMID:14645945

JPRS Report China.

DTIC Science & Technology

1988-07-28

Recognition’ [Yi Hao; Hong Kong LIAOWANG, 30 May 88] 57 Impact of NT Dollar Appreciation on Country’s Industry 58 JPRS-CAR-88-040 26 July 1988... industrial departments, our large and middle-size enterprises are, from policy to organization, very weak in technical innovation . The leadership of...of the Provi- sional Regulations on Control of Individual Urban and Rural Industrial and Commercial Entreprises (5 Septem- ber 1987) 14. Joint

Bonding with the Nuclear Industry: A Technical Communication Professor and His Students Partner With Y-12 National Security Complex

ERIC Educational Resources Information Center

Hirst, Russel

2016-01-01

This article describes how a special kind of academe-industry collaboration--based on a joint appointment agreement between a university and an industry site--was set up, promoted, and experienced by a professor of technical communication and his student interns. To illustrate the nature and value of this kind of collaboration, the article…

Economic Restructuring and Emerging Patterns of Industrial Relations.

ERIC Educational Resources Information Center

Sleigh, Stephen R., Ed.

This book contains nine papers presented during a year-long series of seminars and a conference that analyzed the relationship between economic restructuring and industrial relations involving the joint academics, union leaders, government officials, business executives, and graduate fellows. These analyses include case studies from Western…

A telerobotic digital controller system

NASA Technical Reports Server (NTRS)

Brown, Richard J.

1992-01-01

This system is a network of joint mounted dual axes digital servo-controllers (DDSC), providing control of various joints and end effectors of different robotic systems. This report provides description of and user required information for the Digital Controller System Network (DSCN) and, in particular, the DDSC, Model DDSC-2, developed to perform the controller functions. The DDSC can control 3 phase brushless or brush type DC motors, requiring up to 8 amps. Only four wires, two for power and 2 for serial communication, are required, except for local sensor and motor connections. This highly capable, very flexible, programmable servo-controller, contained on a single, compact printed circuit board measuring only 4.5 x 5.1 inches, is applicable to control systems of all types from sub-arc second precision pointing to control of robotic joints and end effectors. This document concentrates on the robotic applications for the DDSC.

The design and development of a triaxial wear-testing joint simulator.

PubMed

Green, A S; O'Connell, M K; Lyons, A S; James, S P

1999-01-01

Most of the existing wear testers created to wear test total hip replacements, specifically the acetabular component, are designed to exert only an axial force and provide rotation in a close approximation of the actual femoral movement. The Rocky Mountain Joint Simulator was designed to exert three orthogonal forces and provide rotations about the X-, Y- and Z-axes to more closely simulate the physiological forces and motions found in the human gait cycle. The RMJS was also designed with adaptability for other joints, such as knees or canine hips, through the use of hydraulics and a computer-programmable control system. Such adaptability and functionality allows the researcher to more closely model a gait cycle, thereby obtaining wear patterns that resemble those found in retrieved implants more closely than existing simulators. Research is ongoing into the tuning and evaluation of the machine and preliminary acetabular component wear test results will be presented at the conference.

PSC, a Programmable Software Controller for a Multiple Bladder, Sequentially Inflatable G-Suit.

DTIC Science & Technology

1983-12-01

Valves . For inflation and deflation, industrial soleniod pilot valves provide filling and dumping via a manually thrown three -poition switch...medicine with a tool for performing that research. This research concerns itself with developing a programmable valve actuation controller generic to g...Subsystem 2 - Software Controller ......... -5 %o Subsystem 3 - Cromemco D/7A S-100 Bus S y m Conversion Board ....o...... -6 Subsyst 4 Computer/ Valve

Moving Just Like You: Motor Interference Depends on Similar Motility of Agent and Observer

PubMed Central

Kupferberg, Aleksandra; Huber, Markus; Helfer, Bartosz; Lenz, Claus; Knoll, Alois; Glasauer, Stefan

2012-01-01

Recent findings in neuroscience suggest an overlap between brain regions involved in the execution of movement and perception of another’s movement. This so-called “action-perception coupling” is supposed to serve our ability to automatically infer the goals and intentions of others by internal simulation of their actions. A consequence of this coupling is motor interference (MI), the effect of movement observation on the trajectory of one’s own movement. Previous studies emphasized that various features of the observed agent determine the degree of MI, but could not clarify how human-like an agent has to be for its movements to elicit MI and, more importantly, what ‘human-like’ means in the context of MI. Thus, we investigated in several experiments how different aspects of appearance and motility of the observed agent influence motor interference (MI). Participants performed arm movements in horizontal and vertical directions while observing videos of a human, a humanoid robot, or an industrial robot arm with either artificial (industrial) or human-like joint configurations. Our results show that, given a human-like joint configuration, MI was elicited by observing arm movements of both humanoid and industrial robots. However, if the joint configuration of the robot did not resemble that of the human arm, MI could longer be demonstrated. Our findings present evidence for the importance of human-like joint configuration rather than other human-like features for perception-action coupling when observing inanimate agents. PMID:22761853

Managing the Process of International Collaboration in Online Course Development: A Case-Example Involving Higher Education Institutions in Ireland, Switzerland, Austria, and the United Kingdom

ERIC Educational Resources Information Center

Ryan, Cathal; Bergin, Michael; Titze, Sylvia; Ruf, Wolfgang; Kunz, Stefan; Mazza, Riccardo; Chalder, Trudie; Windgassen, Sula; Miner, Dianne Cooney; Wells, John S. G.

2017-01-01

There has been significant growth recently in online learning and joint programmes of education involving collaborative partnerships between and among higher education institutions in different jurisdictions. Utilising an interdisciplinary team model (Care and Scanlan 2001), we describe in this article the process of collaboration among four…

Co-Production of Quality in the Applied Education Research Scheme

ERIC Educational Resources Information Center

Ozga, Jenny

2007-01-01

This contribution looks at the ways in which research quality is defined and addressed in the Applied Education Research Scheme (AERS), particularly within the network on Schools and Social Capital, which is one of the four areas of work within the overall AERS scheme. AERS is a five-year programme, funded jointly by the Scottish Executive and the…

Scientists Grow Therapeutic Protein in Engineered Soya Bean Seeds to Prevent AIDS | Poster

Cancer.gov

Genetically modified soya beans provide a scalable, low-cost method of producing microbicides that prevent AIDS, a technique sustainable for resource-poor countries where AIDS is spreading rapidly. According to the Joint United Nations Programme on HIV/AIDS, more than 36 million people worldwide are living with HIV. While the number of AIDS-related deaths are decreasing,

Remembering History: The Work of the Information Services Sub-Committee of the Joint Information Systems Committee in the UK

ERIC Educational Resources Information Center

Law, Derek

2006-01-01

Purpose: The paper seeks to record the work of the committee and its interaction with the much better known Electronic Libraries (eLib) Programme. It also examines the principles that underlay the development of content acquisition and supporting infrastructure in UK university libraries in the 1990s. Design/methodology/approach: A historical…

Progreen Online Engineering Diploma in the Middle East: Assessment of the Educational Experience

ERIC Educational Resources Information Center

Baytiyeh, Hoda

2018-01-01

Little is known about the status of online learning in the Middle East. This study investigates educational experiences of engineers enrolled in the new joint online ProGreen diploma programme offered by three universities, two in Lebanon and one in Egypt. Forty-eight working engineers responded to an online survey based on the three components of…

Marketing to the marginalised: tobacco industry targeting of the homeless and mentally ill.

PubMed

Apollonio, D E; Malone, R E

2005-12-01

To describe the tobacco industry's relationships with and influence on homeless and mentally ill smokers and organisations providing services to them. Analysis of internal tobacco industry documents and journal articles. The tobacco industry has marketed cigarettes to the homeless and seriously mentally ill, part of its "downscale" market, and has developed relationships with homeless shelters and advocacy groups, gaining positive media coverage and political support. Tobacco control advocates and public health organisations should consider how to target programmes to homeless and seriously mentally ill individuals. Education of service providers about tobacco industry efforts to cultivate this market may help in reducing smoking in these populations.

Educational and intervention strategies for improving a shift system: an experience in a disabled persons' facility.

PubMed

Sakai, K; Watanabe, A; Kogi, K

1993-01-01

The improvement of an irregular three-shift system with anti-clockwise rotation of workers of a disabled persons' facility covering 42 h a week was a subject for management-labour debate. Workers were complaining of physical fatigue, high prevalence of low back pain, sleep shortages associated with short inter-shift intervals, and irregular holidays. With the co-operation of trade union members, an educational and intervention programme was designed to analyse, plan, and implement improved shift rotation schemes. The programme consisted of (a) a group study on the existing system and effects on health and working life; (b) joint planning of potential schemes; (c) communication and feedback (d) testing and evaluation; and (e) agreement on an improved system. The group study was undertaken by means of time study, questionnaire and physiological methods, and the results were jointly discussed. This led to the planning of alternative shift schemes incorporating more regular, clockwise rotation. It was agreed to stage a trial period with a view to shorter working hours. This experience indicated the importance of a stepwise intervention strategy with frequent dialogues and a participatory process focusing on the broad range of working life and health issues.

Philanthropies croisées: a joint venture in public health at Lyon (1917-1940).

PubMed

Saunier, Pierre-Yves; Tournès, Ludovic

2009-01-01

Since the end of the First World War the Rockefeller Foundation has spearheaded a large-scale programme in the field of education for the health professions (doctors and nurses). In several countries throughout the world, but with its efforts concentrated on Europe, it has financed schools, constructed information networks, granted research scholarships and awarded training bursaries. In so doing it has not, however, been in the business of propagating an irresistible "American model," nor has it pursued a huge undertaking in disinterested aid. Through an attempt to contextualize these programmes, to bring to light the existence of common reference points, to retrace the work with local participants and to appraise cleavages within the philanthropic apparatus, this article proposes a fine-grained reading of the role of the Rockefeller Foundation at the Faculté de Médecine (Faculty of Medicine) and the Ecole d'Infirmières et d'assistantes sociales (Training School for Nurses and Social Workers) in Lyon between 1917- and 1940. It analyses these institutions in terms of the transactions, negotiations and appropriations that highlight their joint-venture character and it identifies their varied impact.

75 FR 27010 - Joint Industry Plan; Notice of Filing of Amendment No. 21 to the Joint Self-Regulatory...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-05-13

... processor to create and make available depth-of-book displays; the incorporation into the Plan of the... Elizabeth Murphy, Secretary, Commission, dated February 26, 2010. \\6\\ The complete text of the Plan, as... to submit its projected capacity needs directly to the Plan's Processor. The process avoids any need...

A Joint Learning Activity in Process Control and Distance Collaboration between Future Engineers and Technicians

ERIC Educational Resources Information Center

Deschênes, Jean-Sebastien; Barka, Noureddine; Michaud, Mario; Paradis, Denis; Brousseau, Jean

2013-01-01

A joint learning activity in process control is presented, in the context of a distance collaboration between engineering and technical-level students, in a similar fashion as current practices in the industry involving distance coordination and troubleshooting. The necessary infrastructure and the setup used are first detailed, followed by a…

Protection for the U.S. Automobile Industry: A Joint Class Simulation in Trade Policy.

ERIC Educational Resources Information Center

Hess, Peter N.; Ortmayer, Louis M.

A description of a joint class simulation in trade policy undertaken by an international economics class and a political science class at Davidson College (Pennsylvania) is presented in three sections. Section I describes the structure of the simulation. Students were divided into groups of United States auto manufacturers, the United Auto…

General practitioners and mental health staff sharing patient care: working model.

PubMed

Horner, Deborah; Asher, Kim

2005-06-01

The paper describes a shared care programme developed by mental health services and general practitioners for shifting patients with chronic psychiatric disorders to the care of a general practitioner. The programme is characterized by: (i) a dedicated mental health service general practitioner liaison position to manage the programme and provide support to both patients and doctors; (ii) a multidisciplinary care planning meeting that includes mental health staff, the patient, the general practitioner and a carer; and (iii) a jointly developed individual management plan that specifies patient issues, strategies to deal with these issues, persons responsible for monitoring and a review date. The shared care protocol, the results of a review of patient mental health indicators and general practitioner satisfaction with the programme are described. Outcomes to date suggest that patients' mental health is not compromised and may be enhanced by transfer to general practitioners within the shared care model. Indicators of mental health outcomes (Health of the Nation Outcome Scale and Life Skills Profile scores) show improved patient symptomatology and functioning in most cases. The programme fits the model of recovery-based mental health services and complies with current local, state and Commonwealth policies that encourage integrated and collaborative approaches by mental health services and general practitioners in delivering mental health care to persons with chronic mental illness.

From marginal to marginalised: The inclusion of men who have sex with men in global and national AIDS programmes and policy.

PubMed

McKay, Tara

2016-01-01

In the last decade, gay men and other men who have sex with men (msm) have come to the fore of global policy debates about AIDS prevention. In stark contrast to programmes and policy during the first two decades of the epidemic, which largely excluded msm outside of the Western countries, the Joint United Nations Programme on HIV/AIDS now identifies gay men and other msm as 'marginalized but not marginal' to the global response. Drawing on archival data and five waves of United Nations Country Progress Reports on HIV/AIDS (2001-2012), this paper examines the productive power of international organisations in the development and diffusion of the msm category, and considers how international organisations have shaped the interpretation of msm in national policies and programmes. These data show that the increasing separation of sexual identity and sexual behaviour at the global level helped to construct notions of risk and disease that were sufficiently broad to accommodate the diverse interests of global policy-makers, activists, and governments. However, as various international and national actors have attempted to develop prevention programmes for msm, the failure of the msm category to map onto lived experience is increasingly apparent.

Hip and knee joint loading during vertical jumping and push jerking

PubMed Central

Cleather, Daniel J; Goodwin, Jon E; Bull, Anthony MJ

2014-01-01

Background The internal joint contact forces experienced at the lower limb have been frequently studied in activities of daily living and rehabilitation activities. In contrast, the forces experienced during more dynamic activities are not well understood, and those studies that do exist suggest very high degrees of joint loading. Methods In this study a biomechanical model of the right lower limb was used to calculate the internal joint forces experienced by the lower limb during vertical jumping, landing and push jerking (an explosive exercise derived from the sport of Olympic weightlifting), with a particular emphasis on the forces experienced by the knee. Findings The knee experienced mean peak loadings of 2.4-4.6 × body weight at the patellofemoral joint, 6.9-9.0 × body weight at the tibiofemoral joint, 0.3-1.4 × body weight anterior tibial shear and 1.0-3.1 × body weight posterior tibial shear. The hip experienced a mean peak loading of 5.5-8.4 × body weight and the ankle 8.9-10.0 × body weight. Interpretation The magnitudes of the total (resultant) joint contact forces at the patellofemoral joint, tibiofemoral joint and hip are greater than those reported in activities of daily living and less dynamic rehabilitation exercises. The information in this study is of importance for medical professionals, coaches and biomedical researchers in improving the understanding of acute and chronic injuries, understanding the performance of prosthetic implants and materials, evaluating the appropriateness of jumping and weightlifting for patient populations and informing the training programmes of healthy populations. PMID:23146164

Hip and knee joint loading during vertical jumping and push jerking.

PubMed

Cleather, Daniel J; Goodwin, Jon E; Bull, Anthony M J

2013-01-01

The internal joint contact forces experienced at the lower limb have been frequently studied in activities of daily living and rehabilitation activities. In contrast, the forces experienced during more dynamic activities are not well understood, and those studies that do exist suggest very high degrees of joint loading. In this study a biomechanical model of the right lower limb was used to calculate the internal joint forces experienced by the lower limb during vertical jumping, landing and push jerking (an explosive exercise derived from the sport of Olympic weightlifting), with a particular emphasis on the forces experienced by the knee. The knee experienced mean peak loadings of 2.4-4.6×body weight at the patellofemoral joint, 6.9-9.0×body weight at the tibiofemoral joint, 0.3-1.4×body weight anterior tibial shear and 1.0-3.1×body weight posterior tibial shear. The hip experienced a mean peak loading of 5.5-8.4×body weight and the ankle 8.9-10.0×body weight. The magnitudes of the total (resultant) joint contact forces at the patellofemoral joint, tibiofemoral joint and hip are greater than those reported in activities of daily living and less dynamic rehabilitation exercises. The information in this study is of importance for medical professionals, coaches and biomedical researchers in improving the understanding of acute and chronic injuries, understanding the performance of prosthetic implants and materials, evaluating the appropriateness of jumping and weightlifting for patient populations and informing the training programmes of healthy populations. Copyright © 2012 Elsevier Ltd. All rights reserved.

Developing the First Generally-Available openEHR Archetypes and Templates for Physiotherapy: An Example of Building Clinical Models and Modelling Capacity via Student-Led Academic-Industrial Collaboration.

PubMed

Chihab, Jamila; Franke, Hildegard; McNicoll, Ian; Darlison, Matthew W

2017-01-01

We present the first public openEHR archetypes and templates for physiotherapy, and the context of multidisciplinary academic-industry partnership that has enabled their production by a team led by a clinically trained student on the UCL health informatics MSc programme.

Competing Values in the Culinary Arts and Hospitality Industry: Leadership Roles and Managerial Competencies

ERIC Educational Resources Information Center

Riggs, Michael W.; Hughey, Aaron W.

2011-01-01

It is important that education and training programmes align with the needs of the professions they are designed to support. The culinary arts and hospitality industry is a vocational area that needs to be examined more closely to ensure that the skills and competencies taught are those that will actually be needed when students matriculate from…

20 CFR 655.739 - What is the “recruitment of U.S. workers” obligation that applies to H-1B-dependent employers and...

Code of Federal Regulations, 2012 CFR

2012-04-01

... (e.g., employer may not use age, sex, race or national origin as selection criteria);. (2) Relevant... technology industries, respectively, in hiring workers in the occupations in question. Similarly, a staffing... information technology industry, if the staffing firm is placing computer programmers, software engineers, or...

20 CFR 655.739 - What is the “recruitment of U.S. workers” obligation that applies to H-1B-dependent employers and...

Code of Federal Regulations, 2014 CFR

2014-04-01

... (e.g., employer may not use age, sex, race or national origin as selection criteria);. (2) Relevant... technology industries, respectively, in hiring workers in the occupations in question. Similarly, a staffing... information technology industry, if the staffing firm is placing computer programmers, software engineers, or...

20 CFR 655.739 - What is the “recruitment of U.S. workers” obligation that applies to H-1B-dependent employers and...

Code of Federal Regulations, 2011 CFR

2011-04-01

... (e.g., employer may not use age, sex, race or national origin as selection criteria);. (2) Relevant... technology industries, respectively, in hiring workers in the occupations in question. Similarly, a staffing... information technology industry, if the staffing firm is placing computer programmers, software engineers, or...

20 CFR 655.739 - What is the “recruitment of U.S. workers” obligation that applies to H-1B-dependent employers and...

Code of Federal Regulations, 2013 CFR

2013-04-01

... (e.g., employer may not use age, sex, race or national origin as selection criteria);. (2) Relevant... technology industries, respectively, in hiring workers in the occupations in question. Similarly, a staffing... information technology industry, if the staffing firm is placing computer programmers, software engineers, or...

Training for the Future? A Case Study of Emerging Education, Training and Development Practitioners in the South African Clothing Manufacturing Industry

ERIC Educational Resources Information Center

Jones, Barbara; Cooper, Linda; McMillan, Janice

2006-01-01

This article investigates how training instructors in the South African clothing industry were prepared for their roles as Education, Training and Development Practitioners (ETDPs) by a university adult education programme. The key focus is on how these emerging ETDPs experienced their changing roles, identities and approaches to teaching and the…

Technology advances and market forces: Their impact on high performance architectures

NASA Technical Reports Server (NTRS)

Best, D. R.

1978-01-01

Reasonable projections into future supercomputer architectures and technology require an analysis of the computer industry market environment, the current capabilities and trends within the component industry, and the research activities on computer architecture in the industrial and academic communities. Management, programmer, architect, and user must cooperate to increase the efficiency of supercomputer development efforts. Care must be taken to match the funding, compiler, architecture and application with greater attention to testability, maintainability, reliability, and usability than supercomputer development programs of the past.

Lower limb joint kinetics in walking: the role of industry recommended footwear.

PubMed

Keenan, Geoffrey S; Franz, Jason R; Dicharry, Jay; Della Croce, Ugo; Kerrigan, D Casey

2011-03-01

The effects of current athletic footwear on lower extremity biomechanics are unknown. The aim of this study was to examine the changes, if any, that occur in peak lower extremity net joint moments while walking in industry recommended athletic footwear. Sixty-eight healthy young adults underwent kinetic evaluation of lower extremity extrinsic joint moments while walking barefoot and while walking in current standard athletic footwear matched to the foot mechanics of each subject while controlling for speed. A secondary analysis was performed comparing peak knee joint extrinsic moments during barefoot walking to those while walking in three different standard footwear types: stability, motion control, and cushion. 3-D motion capture data were collected in synchrony with ground reaction force data collected from an instrumented treadmill. The shod condition was associated with a 9.7% increase in the first peak knee varus moment, and increases in the hip flexion and extension moments. These increases may be largely related to a 6.5% increase in stride length with shoes associated with increases in the ground reaction forces in all three axes. The changes from barefoot walking observed in the peak knee joint moments were similar when subjects walked in all three footwear types. It is unclear to what extent these increased joint moments may be clinically relevant, or potentially adverse. Nonetheless, these differences should be considered in the recommendation as well as the design of footwear in the future. Copyright © 2010 Elsevier B.V. All rights reserved.

Industry and Schools as Partners.

ERIC Educational Resources Information Center

Cutietta, Robert A.

1997-01-01

Describes the Grammy in the Schools project that is a joint effort by the National Academy of Recording Arts & Sciences (NARAS) Foundation, Discover Card, and 15 major universities across the country. Expounds that music students are able to learn about a variety of career opportunities available in the music industry. (CMK)

European Industrial Doctorates: Marie Curie Actions

ERIC Educational Resources Information Center

European Commission, 2012

2012-01-01

European industrial doctorates are joint doctoral training projects funded by the European Union (EU) and open to all research fields. The project brings together an academic participant (university, research institution, etc.) and a company. They have to be established in two different EU Member States or associated countries. Associated partners…

Innovative University-Industry-Government Collaboration. Six Case Studies from the USA.

ERIC Educational Resources Information Center

Dryden, R. D.; Erzurumlu, H. C. M.

1996-01-01

University-industry-government collaborations face challenges that necessitate a new culture or mindset. Six U.S. case examples demonstrate ways to create a win-win-win scenario and sustain partnerships: Oregon Joint Graduate Schools of Engineering; Network for Engineering and Research in Oregon; Blacksburg Electronic Village; research…

The SENNAPE Project: An University-Industry Joint Program in Information Technology.

ERIC Educational Resources Information Center

Seixas, J. M.; Maidantchik, C.; Caloba, L. P.

The SENNAPE (Software Engineering and Neural Networks Applied to Physics and Electricity) project has been putting together the European and the Brazilian industries towards neural processing developments in the fields of high-energy physics and electricity. It is a multi-disciplinary international collaboration with the participation of different…

77 FR 27230 - Agency Information Collection Activities; Submission for Office of Management and Budget Review...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-05-09

...) Consumers Union (see Attachment 2 of the Consumers Union comments), which publishes Consumer Reports and (2) The Personal Care Products Council (PCPC) jointly with The Consumer Healthcare Products Association... care products industry and the cosmetics industry in the United States, respectively. The Consumers...

National Apprenticeship and Training Standards for the Sheet Metal Industry. Revised.

ERIC Educational Resources Information Center

Employment and Training Administration (DOL), Washington, DC. Bureau of Apprenticeship and Training.

These national standards are designed to aid contractors, labor, and joint committees in setting up, conducting, and improving apprenticeship programs for individuals seeking to become skilled in the sheet metal industry. Covered in the individual sections are the following topics: the provisions of the apprenticeship standards (definitions,…

Extrabudgetary Funding and Institutional Relationships between Higher Education, Industry, and Social Partners.

ERIC Educational Resources Information Center

Schulte, Peter

2003-01-01

Describes one German university's efforts over 10 years to institutionalize relationships with small- and mid-sized industry and local enterprises, thereby increasing extra-budgetary funding for applied research projects. These joint efforts offer students the opportunity to acquire both theoretical knowledge and practical training during their…

Shear joint capability versus bolt clearance

NASA Technical Reports Server (NTRS)

Lee, H. M.

1992-01-01

The results of a conservative analysis approach into the determination of shear joint strength capability for typical space-flight hardware as a function of the bolt-hole clearance specified in the design are presented. These joints are comprised of high-strength steel fasteners and abutments constructed of aluminum alloys familiar to the aerospace industry. A general analytical expression was first arrived at which relates bolt-hole clearance to the bolt shear load required to place all joint fasteners into a shear transferring position. Extension of this work allowed the analytical development of joint load capability as a function of the number of fasteners, shear strength of the bolt, bolt-hole clearance, and the desired factor of safety. Analysis results clearly indicate that a typical space-flight hardware joint can withstand significant loading when less than ideal bolt hole clearances are used in the design.

Use of herd management programmes to improve the reproductive performance of dairy cattle.

PubMed

McDougall, S; Heuer, C; Morton, J; Brownlie, T

2014-05-01

There has been a long history of herd health and production management programmes in many dairy industries around the world, but evidence for the efficacy of such programmes is limited. In response to a perceived decline in fertility of dairy cows, a herd reproductive management programme (InCalf) was introduced in New Zealand in 2007. This programme uses a management cycle approach that includes an assessment of the current herd status, identification of areas for improvement, development of a plan, implementation of this plan and finally a review process. The programme uses facilitators who work with farmers either in a one-to-one manner or in a formalised group setting that involves a series of meetings over a 12-month period (the farmer action group). The hypothesis that involvement in a reproductive management programme would improve herd reproductive performance was tested using a herd-level controlled randomised study (the National Herd Fertility Study) involving herds in four geographic regions of New Zealand over 2 years. Within each region, herds were ranked on the basis of the 6-week in-calf rate (i.e. the proportion of the herd pregnant in the first 6 weeks of the seasonal breeding programme) in the year preceding commencement of the study and then randomly assigned to be involved in a farmer action group or left as untreated controls. The key outcome variable of the study was the 6-week in-calf rate. Pregnancy diagnosis was undertaken at 12 weeks after the start of the seasonal breeding programme, which allowed determination of conception dates and hence calculation of the 6-week in-calf rate. Additional measurements including heifer live weight and body condition score (pre-calving and pre-mating) were undertaken to test whether treatment resulted in measurable changes in some of the key determinants of herd reproductive performance. Involvement in the farmer action group of InCalf resulted in a 2 percentage point increase in the 6-week in-calf rate (P=0.05). The following additional observations were made in herds involved in the farmer action group relative to control herds: heifers had live weight closer to target; the pre-mating body condition score of cows was higher; and oestrous detection rates were higher. It was concluded that involvement in this herd reproductive management programme improved reproductive outcomes in this New Zealand study. However, to achieve substantial improvements in herd reproductive performance at the regional or national level a greater response to the programme and a high uptake of such programmes is required, as well as use of other industry-level tools such as genetic management programmes.

Practices and risks associated with operation of tie-down lashings in the vehicle transport industry.

PubMed

Fraysse, François; Milanese, Steven; Thewlis, Dominic

2016-12-01

Load restraint systems in automobile transport utilise tie-down lashings placed over the car's tyres, which are tensioned manually by the operator using a ratchet assembly. This process has been identified as a significant manual handling injury risk. The aim of this study was to gain insight on the current practices associated with tie-down lashings operation, and identify the gaps between current and optimal practice. We approached this with qualitative and quantitative assessments and one numerical simulation to establish: (i) insight into the factors involved in ratcheting; (ii) the required tension to hold the car on the trailer; and (iii) the tension achieved by drivers in practice and associated joint loads. We identified that the method recommended to the drivers was not used in practice. Drivers instead tensioned the straps to the maximum of their capability, leading to over-tensioning and mechanical overload at the shoulder and elbow. We identified the postures and strategies that resulted in the lowest loads on the upper body during ratcheting (using both hands and performing the task with their full body). This research marks the first step towards the development of a training programme aiming at changing practice to reduce injury risks associated with the operation of tie-down lashings in the automobile transport industry. Practitioner Summary: The study investigated current practice associated with the operation of tie-down lashings through qualitative (interviews) and quantitative (biomechanical analysis) methods. Operators tended to systematically over-tension the lashings and consequently overexert, increasing injury risks.

Sensory innervation of the temporomandibular joint in the mouse.

PubMed

Dreessen, D; Halata, Z; Strasmann, T

1990-01-01

The sensory innervation of the temporomandibular joints (TMJs) of 8 STR/IN mice was investigated by means of light and electron microscopy. Through the cutting of complete semithin sections in series it was possible to investigate the joints thoroughly. Additionally, one joint with its nerve supply was reconstructed three-dimensionally with a computerized three-dimensional programme. The reconstruction was based on one complete semithin section series. The joint's nerve supply originates from the nervus auriculotemporalis and additionally from motor branches of the n. mandibularis: n. massetericus, n. pterygoideus lateralis and the nn. temporales posteriores. The greatest number of nerve fibres and endings is located in the dorsolateral part of the joint capsule. They lie only in the stratum fibrosum and subsynovially. Neither the stratum synoviale nor the discus articularis contain any nerve fibres or endings, whereas the peri-articular loose connective tissue is richly innervated. The only type of nerve ending observed within the joint was the free nerve ending, which is assumed to serve not only as a nociceptor but also as a polymodal mechanoreceptor. Merely within the insertion of the musculus pterygoideus lateralis at the collum mandibulae single stretch receptors of the Ruffini type were observed. Ultrastructurally, they correspond to those described in the cat's knee joint. Neither lamellated nor nerve endings of the Golgi or Pacini type were observed in the joint or in the peri-articular connective tissue. The unexpected paucity of nerve fibres and endings in the TMJ itself of the mouse suggests that the afferent information from the joint is less important for position sense and movement than the afferent information from muscles, tendons and periodontal ligaments.

Preparing Graduate Students for Industry and Life Long Learning: A Project Based Approach

NASA Astrophysics Data System (ADS)

Thompson, J. Barrie; Edwards, Helen M.

The case is made that by undertaking projects that have a real-world dimension the students are more likely to gain the skills and abilities which industry requires. Background information is presented relating to links between academia and industry and the role of student projects. Details are given of taught masters level computing programmes at the University of Sunderland and the project that each involves. A particular approach that has enabled hundreds of successful projects to be undertaken with industry ever year is then described along with an assessment of its effectiveness in giving students life-time skills.

Clinical effectiveness of knee rehabilitation techniques and implications for a self-care treatment model.

PubMed

Button, Kate; Iqbal, Arshi S; Letchford, Robert H; van Deursen, Robert W M

2012-12-01

Physiotherapy is a complex intervention frequently recommended for knee conditions. The International Classification of Functioning and Disability (ICF) can be used as a framework to evaluate evidence to develop care models and clinical guidelines. To evaluate the clinical effectiveness of knee rehabilitation modalities categorised according to the ICF domains. A keyword search of Medline, Cinahl, Amed, Embase and Cochrane databases from 1996 to 2010 using terms related to the knee joint and physiotherapeutic interventions. Reviewer assessment using inclusion/exclusion criteria and a quality assessment tool compiled from the Critical Appraisal Skills Programme Tool, Consort and Cochrane Bone Joint and Muscle Trauma Groups. Information about the research design, intervention and subjects was extracted. Outcome measures and findings were categorised according to ICF domains. The majority of studies evaluated exercise. Findings were supportive but specific recommendations were limited due to variations in content and application. There was limited quality research to support the theory that manual therapy, electrotherapy or taping in isolation contributes to recovery. Multimodality physiotherapy programmes were found to be beneficial and to reflect clinical practice, but the effectiveness of each component is unknown. Outcome measures from the participation domain of the ICF were used least frequently and were not generally true measures of participation. Development of participation outcome measures is required to evaluate the long-term benefits of interventions. Rehabilitation should be based around delivery of effective exercise programmes incorporating participation outcomes to provide feedback and complement self-care for knee conditions. Copyright © 2011 Chartered Society of Physiotherapy. Published by Elsevier Ltd. All rights reserved.

Deployable robotic woven wire structures and joints for space applications

NASA Technical Reports Server (NTRS)

Shahinpoor, MO; Smith, Bradford

1991-01-01

Deployable robotic structures are basically expandable and contractable structures that may be transported or launched to space in a compact form. These structures may then be intelligently deployed by suitable actuators. The deployment may also be done by means of either airbag or spring-loaded typed mechanisms. The actuators may be pneumatic, hydraulic, ball-screw type, or electromagnetic. The means to trigger actuation may be on-board EPROMS, programmable logic controllers (PLCs) that trigger actuation based on some input caused by the placement of the structure in the space environment. The actuation may also be performed remotely by suitable remote triggering devices. Several deployable woven wire structures are examined. These woven wire structures possess a unique form of joint, the woven wire joint, which is capable of moving and changing its position and orientation with respect to the structure itself. Due to the highly dynamic and articulate nature of these joints the 3-D structures built using them are uniquely and highly expandable, deployable, and dynamic. The 3-D structure naturally gives rise to a new generation of deployable three-dimensional spatial structures.

AED in Europe. Report on a survey.

PubMed

Bahr, Jan; Bossaert, Leo; Handley, Anthony; Koster, Ruud; Vissers, Bart; Monsieurs, Koen

2010-02-01

Based on the strategies for community defibrillation defined by a joint policy conference of ESC and ERC, we have conducted a survey to identify the current status of AED programmes in Europe. All registered visitors to the website of the ERC were contacted by e-mail and invited to participate in a web-based survey. Of the 983 usable responses, 899 came from 36 European countries, representing a total of 748 million inhabitants. In 11 countries AED use by non-physicians has been implemented partially. All but 3 countries reported that first-tier ambulances are equipped with defibrillators. In 13 countries everybody is allowed to use an AED and in 11 countries anybody who has been trained. In 14 countries there are a few community responder programmes, in 14 countries there are hardly any, and in 7 countries there are none. Thirteen countries have implemented a few on-site responder programmes; in 16 countries there are hardly any such programmes, and in 7 countries none. Programmes for home responders can hardly be found in 19 countries; in-hospital programmes exist in 7 countries nearly everywhere. Only 1 country reported that epidemiologic and/or economic evaluations are carried out nearly everywhere when planning AED programmes. Nationwide registries to collect data from resuscitation attempts have been set up in 4 countries. In 27 countries inventories for AEDs can be found here and there. Much has been achieved concerning the provision and use of AEDs in Europe, but there is still a long way to go. Copyright 2009 Elsevier Ireland Ltd. All rights reserved.

An update on EUMETSAT programmes and plans

NASA Astrophysics Data System (ADS)

Klaes, K. Dieter; Holmlund, Kenneth

2016-09-01

EUMETSAT is providing space based observations for operational meteorology and climate monitoring. The observations are measured by geostationary and sun-synchronous polar orbiting satellites in the frame of mandatory programmes. In the frame of optional programmes further observations for altimetry and oceanography are collected and disseminated. In the frame of third party programmes, EUMETSAT makes available data from other agencies' satellites to the user community. Since summer 2015 MSG-4 complements the current operational fleet of operational geostationary spacecraft, Meteosat-7, which is the last satellite of the first generation and the three satellites of the Second Generation of Meteosat, Meteosat-8, Meteosat-9 and Meteosat-10. MSG-4 became Meteosat-11 and was stored in orbit after successful commissioning. Two satellites of the EUMETSAT Polar System (EPS) provide data from sunsynchronous polar orbit. Metop-B, the second of a series of three satellites, launched in September 2012 and Metop-A, the first of the series, in orbit since October 2006 provide operational services. The satellites belong to the Initial Joint Polar System (IJPS) with the US. EUMETSAT's first optional programme continues to provide data from the Jason-2 satellite since summer 2008. As follow on the Jason-3 satellite was launched in January 2016 and is currently in commissioning. To assure continuity development of Meteosat Third Generation (MTG) is ongoing. The EPS-SG programme was fully approved in summer 2015. In the frame of the Copernicus Programme (formerly GMES (Global Monitoring for Environment and Security)) EUMETSAT will operate the marine part of the Sentinel-3 satellite. It was launched in February 2016 and is currently under commissioning.

A status update on EUMETSAT programmes and plans

NASA Astrophysics Data System (ADS)

Klaes, K. Dieter

2017-09-01

The mandate of EUMETSAT is providing space observations for operational meteorology and climate monitoring. EUMETSAT operates geostationary and sun-synchronous polar orbiting satellites through mandatory programmes. Optional programmes provide further observations for altimetry and oceanography. EUMETSAT makes available data from partner agencies' satellites to the user community through third party programmes. The current fleet of operational geostationary spacecraft comprises Meteosat-7, which is the last satellite of the first generation and the four satellites of the Second Generation of Meteosat (MSG), Meteosat-8, Meteosat-9, Meteosat-10 and Meteosat-11. The EUMETSAT Polar System (EPS) provides data from sun-synchronous polar orbit with currently two satellites: Metop-B, the second of a series of three satellites, launched in September 2012 and currently the prime satellite, and Metop-A, the first of the series, in orbit since October 2006. These satellites are part of the Initial Joint Polar System (IJPS) together with the US. EUMETSAT's first optional programme continues to provide data from the Jason-2 satellite since summer 2008. The follow on satellite Jason-3 was successfully launched and commissioned in 2016 and is now providing the reference altimetry mission. To assure continuity in the mandatory missions the development of Meteosat Third Generation (MTG) is ongoing. The EPS-SG EPS Second generation) programme is now under full development. In the frame of the Copernicus Programme EUMETSAT operates the Sentinel-3A satellite, which was launched in February 2016. EUMETSAT is providing operational marine products from the Sentinel-3A satellite. Sentinel-3B, is scheduled to be launched early 2018.

Antimicrobial resistance monitoring projects for zoonotic and indicator bacteria of animal origin: common aspects and differences between EASSA and EFSA.

PubMed

Moyaert, Hilde; de Jong, Anno; Simjee, Shabbir; Thomas, Valérie

2014-07-16

Resistance monitoring programmes are essential to generate data for inclusion in the scientific risk assessment of the potential for transmission of antimicrobial-resistant bacteria or their resistance determinants from food-producing animals to humans. This review compares the technical specifications on monitoring of antimicrobial resistance in zoonotic Salmonella, Campylobacter and indicator Escherichia coli and Enterococcus as performed by the European Food Safety Authority (EFSA) with veterinary pharmaceutical industry's European Antimicrobial Susceptibility Surveillance in Animals (EASSA) programme. The authors conclude that most of EFSA's recent monitoring recommendations have been covered by EASSA since the start of the latter programme in 1998. The major difference between the two programmes is the classification into 'susceptible' versus 'resistant'. While EFSA categorises all isolates with an MIC value above the epidemiological cut-off value as 'resistant', EASSA differentiates between 'percentage decreased susceptible' and 'percentage clinical resistant' strains by applying both epidemiological cut-off values and clinical breakpoints. Because there is still a need to further improve harmonisation among individual EU Member State activities, Animal Health Industry welcomes EFSA's initiative to further improve the quality of resistance monitoring as it is of utmost importance to apply standardised collection procedures and harmonised susceptibility testing, when monitoring antimicrobial resistance across Europe. Copyright © 2014 Elsevier B.V. All rights reserved.

Experimental determination of frequency response function estimates for flexible joint industrial manipulators with serial kinematics

NASA Astrophysics Data System (ADS)

Saupe, Florian; Knoblach, Andreas

2015-02-01

Two different approaches for the determination of frequency response functions (FRFs) are used for the non-parametric closed loop identification of a flexible joint industrial manipulator with serial kinematics. The two applied experiment designs are based on low power multisine and high power chirp excitations. The main challenge is to eliminate disturbances of the FRF estimates caused by the numerous nonlinearities of the robot. For the experiment design based on chirp excitations, a simple iterative procedure is proposed which allows exploiting the good crest factor of chirp signals in a closed loop setup. An interesting synergy of the two approaches, beyond validation purposes, is pointed out.

Welding technology transfer task/laser based weld joint tracking system for compressor girth welds

NASA Technical Reports Server (NTRS)

Looney, Alan

1991-01-01

Sensors to control and monitor welding operations are currently being developed at Marshall Space Flight Center. The laser based weld bead profiler/torch rotation sensor was modified to provide a weld joint tracking system for compressor girth welds. The tracking system features a precision laser based vision sensor, automated two-axis machine motion, and an industrial PC controller. The system benefits are elimination of weld repairs caused by joint tracking errors which reduces manufacturing costs and increases production output, simplification of tooling, and free costly manufacturing floor space.

Microprocessors: Laboratory Simulation of Industrial Control Applications.

ERIC Educational Resources Information Center

Gedeon, David V.

1981-01-01

Describes a course to make technical managers more aware of computer technology and how data loggers, programmable controllers, and larger computer systems interact in a hierarchical configuration of manufacturing process control. (SK)

Sensor sentinel computing device

DOEpatents

Damico, Joseph P.

2016-08-02

Technologies pertaining to authenticating data output by sensors in an industrial environment are described herein. A sensor sentinel computing device receives time-series data from a sensor by way of a wireline connection. The sensor sentinel computing device generates a validation signal that is a function of the time-series signal. The sensor sentinel computing device then transmits the validation signal to a programmable logic controller in the industrial environment.

Ultrasonic guided wave inspection of Inconel 625 brazed lap joints

NASA Astrophysics Data System (ADS)

Comot, Pierre; Bocher, Philippe; Belanger, Pierre

2016-04-01

The aerospace industry has been investigating the use of brazing for structural joints, as a mean of reducing cost and weight. There therefore is a need for a rapid, robust, and cost-effective non-destructive testing method for evaluating the structural integrity of the joints. The mechanical strength of brazed joints depends mainly on the amount of brittle phases in their microstructure. Ultrasonic guided waves offer the possibility of detecting brittle phases in joints using spatio-temporal measurements. Moreover, they offer the opportunity to inspect complex shape joints. This study focused on the development of a technique based on ultrasonic guided waves for the inspection of Inconel 625 lap joints brazed with BNi-2 filler metal. A finite element model of a lap joint was used to optimize the inspection parameters and assess the feasibility of detecting the amount of brittle phases in the joint. A finite element parametric study simulating the input signal shape, the center frequency, and the excitation direction was performed. The simulations showed that the ultrasonic guided wave energy transmitted through, and reflected from, the joints was proportional to the amount of brittle phases in the joint.

Improving the Quality of Teaching and Learning through Leadership for Learning: Changing Scenarios in Basic Schools of Ghana

ERIC Educational Resources Information Center

Malakolunthu, Suseela; McBeath, John; Swaffield, Sue

2014-01-01

This article emerged as a case study from a fact-finding mission of a joint programme between the Centre for Commonwealth Education (CCE) in Cambridge University and the Institute for Educational Planning and Administration (IEPA) in University of Cape Coast, Ghana, to embed innovative approaches to teaching and learning in the basic schools of…

Sub-Saharan Africa Report

DTIC Science & Technology

1986-09-15

Zimbabwe Tourist Development Corporation and its Mozambican counterpart, Empresa Nacional de Turismo , will co-operate in training programmes for...31 Afrikaners Urged To Cooperate With Moderates of Other Races (Hannes de Wet; THE STAR, 13 Aug 86) 33 - b - Official Supports Joint...Illegal Workers Targeted 54 De Klerk on Groups’ Survival 55 Minister Says Apartheid Alive 55 Police Cash Reward 55 ’Illegal Aliens’ Hiring Opposed 56

World Bank Contribution to Building National HIV/AIDS Monitoring and Evaluation Capacity in Africa: Going beyond Indicator Development and Conceptual Training

ERIC Educational Resources Information Center

Wilson, David

2004-01-01

International commitment to the human immunodeficiency virus-acquired immunodeficiency syndrome (HIV/AIDS) epidemic has grown rapidly in recent years, stimulated by the leadership of the Joint United Nations Programme on HIV/AIDS (UNAIDS) and its cosponsors and supported by a range of new mechanisms. These include the World Bank's Multi-Country…

A Joint Venture Model for Teaching Required Courses in "Ethics and Engineering" to Engineering Students

ERIC Educational Resources Information Center

Zandvoort, H.; Van Hasselt, G. J.; Bonnet, J. A. B. A. F.

2008-01-01

We present our experience, spanning more than 10 years of teaching a course on "ethics and engineering" for a group of MSc programmes in applied sciences at Delft University of Technology. The course is taught by a team of teachers from the faculty of Applied Sciences and from the department of Philosophy of the Faculty of Technology,…

Strength and failure analysis of composite-to-composite adhesive bonds with different surface treatments

NASA Astrophysics Data System (ADS)

Paranjpe, Nikhil; Alamir, Mohammed; Alonayni, Abdullah; Asmatulu, Eylem; Rahman, Muhammad M.; Asmatulu, Ramazan

2018-03-01

Adhesives are widely utilized materials in aviation, automotive, energy, defense, and marine industries. Adhesive joints are gradually supplanting mechanical fasteners because they are lightweight structures, thus making the assembly lighter and easier. They also act as a sealant to prevent a structural joint from galvanic corrosion and leakages. Adhesive bonds provide high joint strength because of the fact that the load is distributed uniformly on the joint surface, while in mechanical joints, the load is concentrated at one point, thus leading to stress at that point and in turn causing joint failures. This research concentrated on the analysis of bond strength and failure loads in adhesive joint of composite-to-composite surfaces. Different durations of plasma along with the detergent cleaning were conducted on the composite surfaces prior to the adhesive applications and curing processes. The joint strength of the composites increased about 34% when the surface was plasma treated for 12 minutes. It is concluded that the combination of different surface preparations, rather than only one type of surface treatment, provides an ideal joint quality for the composites.

HELIO: The Heliophysics Integrated Observatory

NASA Technical Reports Server (NTRS)

Bentley, R. D.; Csillaghy, A.; Aboudarham, J.; Jacquey, C.; Hapgood, M. A.; Bocchialini, K.; Messerotti, M.; Brooke, J.; Gallagher, P.; Fox, P.;

Objectives, accomplishments, and future plans of IGCP project 143, remote sensing and mineral exploration

USGS Publications Warehouse

Carter, W.D.; Rowan, L.C.

1981-01-01

The International Geological Correlation Programme (IGCP) is a worldwide cooperative research programme that began in 1974 under the auspices of the International Union of Geological Sciences. Because of the global availability of Earth resources data collected by satellites and the great interest among geologists in taking advantage of these new sources of information, a project was begun in 1976 to improve the rate of technology transfer in the field of remote-sensing exploration for energy and mineral resources. Conducting joint workshops in cooperation with COSPAR has been an important part of this project. It is to be hoped the project will improve our capability to explore, identify, and develop new resources to meet the burgeoning demands of society. ?? 1981.

Effect of proprioception training on knee joint position sense in female team handball players.

PubMed

Pánics, G; Tállay, A; Pavlik, A; Berkes, I

2008-06-01

A number of studies have shown that proprioception training can reduce the risk of injuries in pivoting sports, but the mechanism is not clearly understood. To determine the contributing effects of propioception on knee joint position sense among team handball players. Prospective cohort study. Two professional female handball teams were followed prospectively for the 2005-6 season. 20 players in the intervention team followed a prescribed proprioceptive training programme while 19 players in the control team did not have a specific propioceptive training programme. The coaches recorded all exposures of the individual players. The location and nature of injuries were recorded. Joint position sense (JPS) was measured by a goniometer on both knees in three angle intervals, testing each angle five times. Assessments were performed before and after the season by the same examiner for both teams. In the intervention team a third assessment was also performed during the season. Complete data were obtained for 15 subjects in the intervention team and 16 in the control team. Absolute error score, error of variation score and SEM were calculated and the results of the intervention and control teams were compared. The proprioception sensory function of the players in the intervention team was significantly improved between the assessments made at the start and the end of the season (mean (SD) absolute error 9.78-8.21 degrees (7.19-6.08 degrees ) vs 3.61-4.04 degrees (3.71-3.20 degrees ), p<0.05). No improvement was seen in the sensory function in the control team between the start and the end of the season (mean (SD) absolute error 6.31-6.22 degrees (6.12-3.59 degrees ) vs 6.13-6.69 degrees (7.46-6.49 degrees ), p>0.05). This is the first study to show that proprioception training improves the joint position sense in elite female handball players. This may explain the effect of neuromuscular training in reducing the injury rate.

Experiences from 10 years of school programmes at GEOMAR Kiel

NASA Astrophysics Data System (ADS)

Dengg, Joachim

2014-05-01

GEOMAR Helmholtz Centre for Ocean Research Kiel, Germany, started a programme of cooperations with secondary schools in 2003, which has been expanding continually since that time. By active involvement of teachers and students, the Centre's research topics are communicated to schools, and young people are encouraged to develop their interest for biogeosciences. The portfolio of activities includes: project work with schools over periods from one day to several months, individual student theses at the research centre, internships, a weekly "Research Club" allowing individual experiments, summer school programmes, teacher training courses, joint activities with international partners and a video-project in which students portray scientific aspects of oceanic oxygen minimum zones (in the context of the Collaborative Research Center SFB 754) to other students. Essential prerequisites for these activities are the direct involvement of the Centre's researchers who contribute their expertise and act as role-models for the students, dedicated staff for coordination and continuity, and financial and structural support both at the research centre and the schools.

Participatory approach to improving safety, health and working conditions in informal economy workplaces in Cambodia.

PubMed

Kawakami, Tsuyoshi; Tong, Leng; Kannitha, Yi; Sophorn, Tun

2011-01-01

The present study aimed to improve safety and health in informal economy workplaces such as home workplaces, small construction sites, and rural farms in Cambodia by using "participatory" approach. The government, workers' and employers' organizations and NGOs jointly assisted informal economy workers in improving safety and health by using participatory training methodologies. The steps taken were: (1) to collect existing good practices in safety and health in Cambodia; (2) to develop new participatory training programmes for home workers and small construction sites referring to ILO's WISE training programme, and (3) to train government officers, workers, employers and NGOs as safety and health trainers. The participatory training programmes developed consisted of action-checklists associated with illustrations, good example photo sheets, and texts explaining practical, low-cost improvement measures. The established safety and health trainers reached many informal economy workers through their human networks, and trained them by using the developed participatory training programmes. More than 3,000 informal economy workers were trained and they implemented improvements by using low-cost methods. Participatory training methodologies and active cooperation between the government, workers, employers and NGOs made it possible to provide practical training for those involved in the informal economy workplaces.

Nordic hamstring exercise training alters knee joint kinematics and hamstring activation patterns in young men.

PubMed

Delahunt, Eamonn; McGroarty, Mark; De Vito, Giuseppe; Ditroilo, Massimiliano

2016-04-01

To investigate the kinematic and muscle activation adaptations during performance of the Nordic hamstring exercise (NHE) to a 6-week eccentric hamstring training programme using the NHE as the sole mode of exercise. Twenty-nine healthy males were randomly allocated to a control (CG) or intervention (IG) group. The IG participated in a 6-week eccentric hamstring exercise programme using the NHE. The findings of the present study were that a 6-week eccentric hamstring training programme improved eccentric hamstring muscle strength (202.4 vs. 177.4 nm, p = 0.0002, Cohen's d = 0.97) and optimized kinematic (longer control of the forward fall component of the NHE, 68.1° vs. 73.7°, p = 0.022, Cohen's d = 0.90) and neuromuscular parameters (increased electromyographic activity of the hamstrings, 83.2 vs. 56.6 % and 92.0 vs. 54.2 %, p < 0.05, Cohen's d > 1.25) associated with NHE performance. This study provides some insight into potential mechanisms by which an eccentric hamstring exercise programme utilizing the NHE as the mode of exercise may result in an improvement in hamstring muscle control during eccentric contractions.

Applied Art in Trade and Industrial Education.

ERIC Educational Resources Information Center

King, Annie; Zirkle, Chris

Ohio Hi-Point Joint Vocational School (JVS) has developed a comprehensive art program within the vocational setting. Selected trade and industrial programs at the school, as well as programs in agriculture and home economics, incorporate art instruction. The goals of the applied art program are as follows: to give students the opportunity to…

Using ITS to Create an Insurance Industry Application: A Joint Case Study.

ERIC Educational Resources Information Center

Boies, Stephen J.; And Others

1993-01-01

Presents an empirical case study of the use of ITS, a software development environment designed by IBM, by Continental Insurance for underwriting applications. Use of a rule-based user interface style that made electronic forms look like standard insurance industry paper forms and worked according to Continental's guidelines is described.…

JOBS. A Partnership between Education and Industry.

ERIC Educational Resources Information Center

Mann, Sandra; And Others

This packet contains 15 lessons developed in a workplace basic skills project for the metal casting industry established jointly by Central Alabama Community College and Robinson Foundry, Inc. The lessons cover the following topics: (1) green sand schedule; (2) the core room; (3) the core room (continued); (4) figuring time; (5) the cleaning room;…

76 FR 14346 - Airworthiness Directives; Diamond Aircraft Industries GmbH Model DA 42 Airplanes

Federal Register 2010, 2011, 2012, 2013, 2014

2011-03-16

... Industries GmbH Model DA 42 Airplanes AGENCY: Federal Aviation Administration (FAA), Department of... been reportedly found on DA 42 Main Landing Gear (MLG) Damper-to-Trailing Arm joints during standard... condition for the specified products. The MCAI states: Cracks have been reportedly found on DA 42 Main...

The Joint Convention - Its Structure, the Articles and its Administration

DOE Office of Scientific and Technical Information (OSTI.GOV)

Metcalf, P.; Louvat, D.

The objective of the Joint Convention on the Safety of Spent Fuel Management and on the Safety of Radioactive Waste Management (The Joint Convention) is to achieve a high level of safety worldwide in the management of spent nuclear and fuel and radioactive waste. [1] It is an incentive convention designed to encourage and assist countries to achieve the objective. Contracting Parties to the Joint Convention are required to compile and submit a national report on how they meet the articles of the Joint Convention. The reports are peer reviewed by other Contracting Parties to the Joint Convention and thenmore » countries have to defend the report at a review meeting of all the Contracting Parties. The process entails both a self appraisal in compiling the report and independent international peer review. Summaries are compiled of the various reviews and these are presented in plenary, with a view to identifying generic issues and areas in which countries are improving safety or have identified for further development. The process also presents an opportunity for countries involved to benchmark their national spent fuel and radioactive waste safety programmes against prevailing international practice. The paper elaborates the detailed elements involved and discusses the experience from the first review meeting of Contracting Parties, and issues envisaged for consideration at the second review meeting scheduled for May 2006. (authors)« less

High-power Laser Welding of Thick Steel-aluminum Dissimilar Joints

NASA Astrophysics Data System (ADS)

Lahdo, Rabi; Springer, André; Pfeifer, Ronny; Kaierle, Stefan; Overmeyer, Ludger

According to the Intergovernmental Panel on Climate Change (IPCC), a worldwide reduction of CO2-emissions is indispensable to avoid global warming. Besides the automotive sector, lightweight construction is also of high interest for the maritime industry in order to minimize CO2-emissions. Using aluminum, the weight of ships can be reduced, ensuring lower fuel consumption. Therefore, hybrid joints of steel and aluminum are of great interest to the maritime industry. In order to provide an efficient lap joining process, high-power laser welding of thick steel plates (S355, t = 5 mm) and aluminum plates (EN AW-6082, t = 8 mm) is investigated. As the weld seam quality greatly depends on the amount of intermetallic phases within the joint, optimized process parameters and control are crucial. Using high-power laser welding, a tensile strength of 10 kN was achieved. Based on metallographic analysis, hardness tests, and tensile tests the potential of this joining method is presented.

Integrating Energy and Environmental Management in Wood Furniture Industry

PubMed Central

Babić, Milun; Jelić, Dubravka; Konćalović, Davor; Vukašinović, Vladimir

2014-01-01

As energy costs continue to rise, industrial plants (even those of energy nonintensive industries such as furniture industry) need effective way to reduce the amount of energy they consume. Besides, there are a number of economic and environmental reasons why a company should consider environmental management initiatives. This paper provides a detailed guideline for implementing joint energy and environmental management system in wood furniture industrial company. It covers in detail all essential aspects of the system: initial system assessment, organization, policy development, energy and environmental auditing, action plan development, system promotion, checking system performance, and management review. PMID:24587734

Integrating energy and environmental management in wood furniture industry.

PubMed

Gordić, Dušan; Babić, Milun; Jelić, Dubravka; Konćalović, Davor; Vukašinović, Vladimir

2014-01-01

As energy costs continue to rise, industrial plants (even those of energy nonintensive industries such as furniture industry) need effective way to reduce the amount of energy they consume. Besides, there are a number of economic and environmental reasons why a company should consider environmental management initiatives. This paper provides a detailed guideline for implementing joint energy and environmental management system in wood furniture industrial company. It covers in detail all essential aspects of the system: initial system assessment, organization, policy development, energy and environmental auditing, action plan development, system promotion, checking system performance, and management review.

A Computational approach in optimizing process parameters of GTAW for SA 106 Grade B steel pipes using Response surface methodology

NASA Astrophysics Data System (ADS)

Sumesh, A.; Sai Ramnadh, L. V.; Manish, P.; Harnath, V.; Lakshman, V.

2016-09-01

Welding is one of the most common metal joining techniques used in industry for decades. As in the global manufacturing scenario the products should be more cost effective. Therefore the selection of right process with optimal parameters will help the industry in minimizing their cost of production. SA 106 Grade B steel has a wide application in Automobile chassis structure, Boiler tubes and pressure vessels industries. Employing central composite design the process parameters for Gas Tungsten Arc Welding was optimized. The input parameters chosen were weld current, peak current and frequency. The joint tensile strength was the response considered in this study. Analysis of variance was performed to determine the statistical significance of the parameters and a Regression analysis was performed to determine the effect of input parameters over the response. From the experiment the maximum tensile strength obtained was 95 KN reported for a weld current of 95 Amp, frequency of 50 Hz and peak current of 100 Amp. With an aim of maximizing the joint strength using Response optimizer a target value of 100 KN is selected and regression models were optimized. The output results are achievable with a Weld current of 62.6148 Amp, Frequency of 23.1821 Hz, and Peak current of 65.9104 Amp. Using Die penetration test the weld joints were also classified in to 2 categories as good weld and weld with defect. This will also help in getting a defect free joint when welding is performed using GTAW process.

Genetic conditions of joint Nordic genetic evaluations of lifetime competition performance in warmblood sport horses.

PubMed

Viklund, Å; Furre, S; Eriksson, S; Vangen, O; Philipsson, J

2015-08-01

Breeding programmes for warmblood sport horses are similar in the Nordic countries Sweden, Denmark, Finland and Norway, and stallions of same origin are used. The aim was to investigate whether a joint Nordic genetic evaluation based on lifetime competition performance is feasible and beneficial for breeding competitive sport horses in the Nordic countries. Results for almost 45,000 horses in show jumping and 30,000 horses in dressage were available. The larger populations in Sweden and Denmark contributed with 85% of the results. Heritabilities and genetic correlations between performances in the different countries were estimated, and comparisons of accuracies of estimated breeding values (EBVs) and number of stallions with EBVs based on national or joint data were studied. The heritabilities ranged between 0.25 and 0.42 for show jumping and between 0.14 and 0.55 for dressage. The genetic correlations between competition performances in the Nordic countries were estimated to 0.63-1.00. EBVs based on joint data increased accuracies for EBVs for stallions by 38-81% and increased the number of available stallions with EBVs by 40-288%, compared to EBVs based on national data only. A joint Nordic genetic evaluation for sport horses is recommended. © 2015 Blackwell Verlag GmbH.

East Europe Report, Economic and Industrial Affairs

DTIC Science & Technology

1984-07-23

publication in no way represent the poli- cies, views or attitudes of the U.S. Government. PROCUREMENT OF PUBLICATIONS JPRS publications may be ordered...U.S. Government Printing Office, Washington, D.C. 20402. Correspondence pertaining to matters other than procurement * may be addressed to Joint...formulation and coordination of joint programs for cooperation and inte- gration in basic subsectors and production facilities and the solution of

Text Mining the Biomedical Literature

DTIC Science & Technology

2007-11-05

activities, and repeating past mistakes, or 3) agencies not participating in joint efforts that would fully exploit each agency’s strengths...research and joint projects (multi- department, multi-agency, multi-national, and government-industry) appropriate? • Is the balance among single...overall database taxonomy, i.e., are there any concepts missing from any of the databases, and even if not, do all the concepts bear the same

Industrial uses of radiation processing in Belgium

NASA Astrophysics Data System (ADS)

Lacroix, J. P.

Since 1979, the Irradiation Department of IRE, in conjunction with universities and the industrial sector, has set up an extensive programme of research, development and promotion of the radiation process applied to cross-linking and polymerization of plastics, to waste treatment and to food preservation. Starting from scratch, it is thanks to our research in this last-mentioned field that we have been able to develop and to increase the application of the irradiation process within the food industry. At present, two irradiation facilities of a total design capacity of 2.5 10 6 Ci irradiate 24 hours per day mostly for the agro-industry.

Sport-specific biomechanical responses to an ACL injury prevention programme: A randomised controlled trial.

PubMed

Taylor, Jeffrey B; Ford, Kevin R; Schmitz, Randy J; Ross, Scott E; Ackerman, Terry A; Shultz, Sandra J

2018-04-19

Anterior cruciate ligament (ACL) injury prevention programmes have not been as successful at reducing injury rates in women's basketball as in soccer. This randomised controlled trial (ClinicalTrials.gov #NCT02530333) compared biomechanical adaptations in basketball and soccer players during jump-landing activities after an ACL injury prevention programme. Eighty-seven athletes were cluster randomised into intervention (6-week programme) and control groups. Three-dimensional biomechanical analyses of drop vertical jump (DVJ), double- (SAG-DL) and single-leg (SAG-SL) sagittal, and double- (FRONT-DL) and single-leg (FRONT-SL) frontal plane jump landing tasks were tested before and after the intervention. Peak angles, excursions, and joint moments were analysed using two-way MANCOVAs of post-test scores while controlling for pre-test scores. During SAG-SL the basketball intervention group exhibited increased peak knee abduction angles (p = .004) and excursions (p = .003) compared to the basketball control group (p = .01) and soccer intervention group (p = .01). During FRONT-SL, the basketball intervention group exhibited greater knee flexion excursion after training than the control group (p = .01), but not the soccer intervention group (p = .11). Although women's soccer players exhibit greater improvements in knee abduction kinematics than basketball players, these athletes largely exhibit similar biomechanical adaptations to ACL injury prevention programmes.

Services supporting collaborative alignment of engineering networks

NASA Astrophysics Data System (ADS)

Jansson, Kim; Uoti, Mikko; Karvonen, Iris

2015-08-01

Large-scale facilities such as power plants, process factories, ships and communication infrastructures are often engineered and delivered through geographically distributed operations. The competencies required are usually distributed across several contributing organisations. In these complicated projects, it is of key importance that all partners work coherently towards a common goal. VTT and a number of industrial organisations in the marine sector have participated in a national collaborative research programme addressing these needs. The main output of this programme was development of the Innovation and Engineering Maturity Model for Marine-Industry Networks. The recently completed European Union Framework Programme 7 project COIN developed innovative solutions and software services for enterprise collaboration and enterprise interoperability. One area of focus in that work was services for collaborative project management. This article first addresses a number of central underlying research themes and previous research results that have influenced the development work mentioned above. This article presents two approaches for the development of services that support distributed engineering work. Experience from use of the services is analysed, and potential for development is identified. This article concludes with a proposal for consolidation of the two above-mentioned methodologies. This article outlines the characteristics and requirements of future services supporting collaborative alignment of engineering networks.

SmartRoads: training Indonesian workers to become road safety ambassadors in industrial and community settings.

PubMed

Montero, Kerry; Spencer, Graham; Ariens, Bernadette

2012-06-01

This paper reports on a programme to improve road safety awareness in an industrial community in the vicinity of Jakarta, in Indonesia. Adapting the model of a successful community and school-based programme in Victoria, in Australia, and using a peer education approach, 16 employees of a major manufacturing company were trained to implement road safety education programmes amongst their peers. Specific target groups for the educators were colleagues, schools and the local community. Over 2 days the employees, from areas as diverse as production, public relations, personnel services, administration and management, learned about road safety facts, causes of traffic casualties, prevention approaches and peer education strategies. They explored and developed strategies to use with their respective target groups and practised health education skills. The newly trained workers received certificates to acknowledge them as 'SmartRoads Ambassadors' and, with follow-up support and development, became road safety educators with a commitment and responsibility to deliver education to their respective work and local communities. This paper argues that the model has potential to provide an effective and locally relevant response to road safety issues in similar communities.

Recruitment strategies for a hand dermatitis prevention programme in the food industry.

PubMed

Kaatz, Martin; Ladermann, Regina; Stadeler, Martina; Fluhr, Joachim Wilhelm; Elsner, Peter; Bauer, Andrea

2008-09-01

An interdisciplinary 'Skin Disease Prevention Programme (SDPP) in the baking, hotel, and catering industries' was established. However, only 30% of the eligible employees suffering from occupational hand dermatitis (OHD) participated in the programme. The aim of the present study was to increase the participation rate in the SDPP from 30% to 50% by specific recruitment strategies. Two hundred and twenty five baker and catering trade employees suffering from OHD were included in a prospective controlled intervention study. The employees were invited to take part in the SDPP using (i) a standard invitation letter (n = 40), (ii) a newly developed, personalized, and targeted invitation letter (n = 52), (iii) the new invitation letter and a case report (n = 75), and (iv) the new invitation letter, the case report, and the additional information (n = 58). The commitment of the employees to join the SDPP increased significantly from 30% to 54% (P < 0.02) in the group receiving the new personalized targeted invitation letter. Neither the additional case report nor the supplementation with additional information concerning the SDPP did further increase the recruitment. The strategy to personalize and target the new invitation letter was successful to influence the employees' commitment to participate in the SDPP.

The risks and prevention of contamination of beef feedlot cattle: the perspective of the United States of America.

PubMed

Smith, R A; Griffin, D D; Dargatz, D A

1997-08-01

There are currently no scientifically defined critical management points or critical control points to manage foodborne pathogens at the pre-harvest level. Research is ongoing: much of the pre-harvest research is funded by producer organisations. The beef industry has Beef Quality Assurance (BQA) programmes in place and these are dynamic. Groups of cattlemen have made a very strong commitment to reducing foodborne pathogens in beef. Fewer Escherichia coli O157:H7 organisms are shed by feedlot cattle near the end of the feeding period than by newly arrived cattle. Moreover, there is less shedding of the organisms in cattle of slaughter age than in younger cattle. The prevalence of E. coli O157:H7 in feedlot cattle is similar to that in range cattle. This suggests that concentrating cattle in feedlot dirt pens does not increase the risk of shedding E. coli organisms. Pen maintenance, considered a good management practice, appears to be an adequate means of keeping pathogen levels in pens low. It is not likely that pre-harvest food safety programmes will eliminate the threat of pathogens such as E. coli O157:H7 or Salmonella. The management of foodborne pathogens will become part of an integrated programme to enhance food safety which includes the producer, the packer, the distributors, retailers and the consumer. The feedlot industry initiated a residue avoidance programme several years ago. As a result, the risk of chemical residues in beef from feedlots in the United States of America is near zero. Hazard analysis and critical control point-type prevention programmes, using scientifically based critical management points, will help ensure that the risk remains negligible.

Student Teachers of Technology and Design: Can Short Periods of STEM-Related Industrial Placement Change Student Perceptions of Engineering and Technology?

ERIC Educational Resources Information Center

Gibson, Ken S.

2012-01-01

This is a report, on a small-scale case study, of a programme of short industrial placements (5 day block) for student teachers of technology and design in Northern Ireland. Such placements increase student awareness and understanding of the nature of Engineering and Technology and therefore better prepare them to teach these subjects, as integral…

Characteristics of a self-management support programme applicable in primary health care: a qualitative study of users' and health professionals' perceptions.

PubMed

Solberg, Hilde Strøm; Steinsbekk, Aslak; Solbjør, Marit; Granbo, Randi; Garåsen, Helge

2014-11-08

Development of more self-management support programmes in primary health care has been one option used to enhance positive outcomes in chronic disease management. At present, research results provide no consensus on what would be the best way to develop support programmes into new settings. The aim of the present study was therefore to explore users' and health professionals' perceptions of what would be the vital elements in a self - management support programme applicable in primary health care, how to account for them, and why. Four qualitative, semi-structured focus group interviews were conducted in Central Norway. The informants possessed experience in development, provision, or participation in a self-management support programme. Data was analysed by the Systematic Text Condensation method. The results showed an overall positive expectation to the potential benefits of development of a self-management support programme in primary health care. Despite somewhat different arguments and perspectives, the users and the health professionals had a joint agreement on core characteristics; a self-management support programme in primary health care should therefore be generic, not disease specific, and delivered in a group- based format. A special focus should be on the everyday- life of the participants. The most challenging aspect was a present lack of competence and experience among health professionals to moderate self-management support programmes. The development and design of a relevant and applicable self-management support programme in primary health care should balance the interests of the users with the possibilities and constraints within each municipality. It would be vital to benefit from the closeness of the patients' every-day life situations. The user informants' perception of a self-management support programme as a supplement to regular medical treatment represented an expanded understanding of the self-management support concept. An exploring approach should be applied in the development of the health professionals' competence in practice. The effect of a self-management support programme based on the core characteristics found in this study needs to be evaluated.

Analyse d'un programme d'electromecanique en ses concepts et principes physiques: Methode et application

NASA Astrophysics Data System (ADS)

Gagnon, Richard; Besançon, Jacques; Jean, Pascale

1989-09-01

In many Western countries there is growing interest in the usefulness of scientific knowledge in vocational and technical training. Moreover, there is an increasing tendency in these countries to formulate objectives within teaching programmes, in order to come closer to the real tasks of the world of work. To determine what knowledge is required, a general method of analysing objective-based vocational training programmes was developed. This allows the identification of the minimum scientific and mathematical concepts and principles which are necessary to reach the learning objectives, and the establishment of their relative significance and the requisite level of detail. It has been used to determine the essential physical concepts of the industrial mechanics section (625 hours) of a programme on the electromechanics of automated systems. The results reveal the existence of 41 concepts needed for a total of 2,452.5 hours. A limited group of these is of particular importance.

[Example of product development by industry and research solidarity].

PubMed

Seki, Masayoshi

2014-01-01

When the industrial firms develop the product, the research result from research institutions is used or to reflect the ideas from users on the developed product would be significant in order to improve the product. To state the software product which developed jointly as an example to describe the adopted development technique and its result, and to consider the modality of the industry solidarity seen from the company side and joint development. The software development methods have the merit and demerit and necessary to choose the optimal development technique by the system which develops. We have been jointly developed the dose distribution browsing software. As the software development method, we adopted the prototype model. In order to display the dose distribution information, it is necessary to load four objects which are CT-Image, Structure Set, RT-Plan, and RT-Dose, are displayed in a composite manner. The prototype model which is the development technique was adopted by this joint development was optimal especially to develop the dose distribution browsing software. In a prototype model, since the detail design was created based on the program source code after the program was finally completed, there was merit on the period shortening of document written and consist in design and implementation. This software eventually opened to the public as an open source. Based on this developed prototype software, the release version of the dose distribution browsing software was developed. Developing this type of novelty software, it normally takes two to three years, but since the joint development was adopted, it shortens the development period to one year. Shortening the development period was able to hold down to the minimum development cost for a company and thus, this will be reflected to the product price. The specialists make requests on the product from user's point of view are important, but increase in specialists as professionals for product development will increase the expectations to develop a product to meet the users demand.

Environmental liability and redevelopment of old industrial land.

PubMed

Sigman, Hilary

2010-01-01

Many communities are concerned about the reuse of potentially contaminated land (brownfields) and believe that environmental liability is a hindrance to redevelopment. However, with land price adjustments, liability might not impede the reuse of this land. This article studies state liability rules-specifically, strict liability and joint and several liability-that affect the level and distribution of expected costs of private cleanup. It explores the effects of this variation on industrial land prices and vacancy rates and on reported brownfields in a panel of cities across the United States. In the estimated equations, joint and several liability reduces land prices and increases vacancy rates in central cities. The results suggest that liability is at least partly capitalized but does still deter redevelopment.

Establishing a Master׳s for Europe--A transnational model for higher education.

PubMed

Fleming, V; Luyben, A

2016-02-01

Over the last 50 years leading international organisations have been emphasising the key role that midwives play in the provision of quality care for women and babies throughout the pregnancy continuum. Midwifery education, however, generally remained at pre-university level until recently when Bachelors' programmes were developed. In Europe this development was taken further with the awarding of a European Union Lifelong Learning Programme grant to a consortium of five universities in four countries to develop a joint Master's degree in midwifery. The first students, drawn not only from the countries of the partner institutions but also from other European countries and from countries outside of Europe, commenced their studies in 2009. DOES THE PROGRAMME MEET ITS OBJECTIVES AND THOSE SET OUT IN THE LANCET SERIES?: The objectives of the programme were in line with the requirements for effective midwifery care and evidence based practice as discussed in the Lancet series. As an EU funded project all the goals were met. However, in terms of its long-term sustainability problems arose due to the need for universities to rationalise programmes. The number of students has remained steady but low with the projected growth not taking place thus it has been impossible to perceive an impact on midwifery practice and the health of women and children where graduates are working. Despite limitations, the programme serves as an exemplary model of how a Master's programme in midwifery can be successfully built through a collaboration of interested parties from different countries, and can be applied at a global level in other regions of the world, with sufficient political and economic support. Copyright © 2015 Elsevier Ltd. All rights reserved.

Housing trends and impact on wood manufacturing

Treesearch

Matt Bumgardner; Urs Buehlmann; Al Schuler; Karen Koenig

2013-01-01

Demand from housing and other construction-related sectors continues to be an important issue for the secondary wood products industry. Conducted in early 2013, this fourth annual survey provides updated information on the status and actions of U.S. manufacturers affected by these industries. The study is a joint effort by Virginia Tech, the USDA Forest Service, and...

The Rock Valley College Career Advancement Program.

ERIC Educational Resources Information Center

Rock Valley Coll., Rockford, IL.

The Career Advancement Program (CAP) is a joint effort by a 2-year college and industrial firms in its district to expand educational opportunities, to match college programs to local needs, and to help industry meet its present and future technical manpower needs. CAP has worked to attract students, full- or part-time, to technical training.…

Needs Assessment for the Construction Industry in B.C. & the Yukon. Skill Plan.

ERIC Educational Resources Information Center

Lewe, Glenda

A basic skills needs assessment developed a picture of the basic skills levels and needs of the construction industry in British Columbia and the Yukon. The three parts of the assessment were interviews with business managers and managers of other programs provided through joint labor/management initiatives, a questionnaire administered to…

Future Digital Economy: Digital Content Creation, Distribution and Access--Conference Conclusions. OECD Digital Economy Papers No. 118

ERIC Educational Resources Information Center

OECD Publishing (NJ1), 2006

2006-01-01

This conference, jointly organised by OECD's Department for Science, Technology and Industry and the Italian Ministry for Innovation and Technology, was attended by approximately 350 representatives from industry, academia and government. Rapporteurs presented summaries in terms of issues and areas where there was agreement and/or convergence…

Engaged in Debate: Major Albert C. Wedemeyer and the 1941 Victory Plan in Historical Memory

DTIC Science & Technology

2017-05-25

was simply a “ base of departure” or “benchmark” for continuing military-industrial dialogue, and, in this light, Wedemeyer’s manpower estimate was...only theaters and military operations, but manpower and industrial production as well. The result was the Victory Program, which officially began in... manpower and industrial production as well. The result was the Victory Program, which officially began in the summer of 1941 with a joint Army and Navy

Planing Meeting on Asian/Pacific Joint Production Programme of Materials for Neo-Literates in Rural Areas (Tokyo, Japan, June 7-9, 1993). Report.

ERIC Educational Resources Information Center

Asia/Pacific Cultural Centre for UNESCO, Tokyo (Japan).

This publication provides the final report of a planning meeting to discuss literacy programs of the Asia/Pacific Cultural Center for UNESCO (ACCU) to be carried out under regional cooperation and other materials from the meeting. The final report describes the purpose of the meeting and summarizes these presentations: opening addresses, reports,…

PROUST: Knowledge-Based Program Understanding.

DTIC Science & Technology

1983-08-01

undeniably yes. If anything, PROUST is the minimum that is required! The basis for this conclusion is twofold: 1. In Artificial Intelligence research...Role of Plans in Intellegent Teaching Systems. In Brown, J. S. and Sleeman, D. (editors), Intellegent Tutoring Systems. New York. 1981. [8] Goldstein, I...95, 1978. (12] Rich, C. A Formal Representation for Plans in the Programmer’s Apprentice. In Proc. of the Seventh Int. Joint Conf. on Artificial

China’s Peaceful Rise

DTIC Science & Technology

2014-05-20

existential war on several fronts offers the U.S. military a strong opportunity to protect its dwindling budget. 14 Glaser. 15 See Zheng Bijian, “China’s...off [the] Somali coast, [and to ensure] the safety of ships carrying humanistic materials of such international organisations as the World Food...Programme [;] and, if the need arises, the taskforce will jointly conduct humanistic rescue operations with the escorting ships of other countries.” 26

Environmental Security in the Danube River Basin: Policy Implications for the United States

DTIC Science & Technology

1999-01-01

United Nations Environmental Programme and Centre for Human Settlements jointly formed a Balkans Task Force that has been conducting independent and...1199 V ACKNOWLEDGMENTS I would like to thank the United States Air Force Institute for National Security Studies (TNSS) and the Army Environmental...regularly scheduled course on Responsibilities of Military Forces in Environmental Protection. Mr. Robert Jarrett of AEPI provided valuable review

An Evaluation of the Training Needs of Staff in the Further Education Sector in the Republic of Ireland

ERIC Educational Resources Information Center

McNamara, Gerry; Mulcahy, Carmel; O'Hara, Joe

2005-01-01

This article examines the training needs of educators working in the further education (FE), adult education, and Second Chance sectors in the Republic of Ireland. The research on which it is based was funded jointly by the European Union Leonardo da Vinci Programme and the Department of Education and Science of Ireland and took place from 1998 to…

Prosthetic Joint Infection

PubMed Central

Tande, Aaron J.

2014-01-01

SUMMARY Prosthetic joint infection (PJI) is a tremendous burden for individual patients as well as the global health care industry. While a small minority of joint arthroplasties will become infected, appropriate recognition and management are critical to preserve or restore adequate function and prevent excess morbidity. In this review, we describe the reported risk factors for and clinical manifestations of PJI. We discuss the pathogenesis of PJI and the numerous microorganisms that can cause this devastating infection. The recently proposed consensus definitions of PJI and approaches to accurate diagnosis are reviewed in detail. An overview of the treatment and prevention of this challenging condition is provided. PMID:24696437

Aeroacoustics research in Europe: The CEAS-ASC report on 2013 highlights

NASA Astrophysics Data System (ADS)

Bennett, G. J.; Kennedy, J.; Meskell, C.; Carley, M.; Jordan, P.; Rice, H.

2015-03-01

The Council of European Aerospace Societies (CEAS) Aeroacoustics Specialists Committee (ASC) supports and promotes the interests of the scientific and industrial aeroacoustics community on an European scale and European aeronautics activities internationally. In this context, "aeroacoustics" encompasses all aerospace acoustics and related areas. Each year the committee highlights some of the research and development projects in Europe. This paper is a report on highlights of aeroacoustics research in Europe in 2013, compiled from information provided to the ASC of the CEAS. During 2013, a number of research programmes involving aeroacoustics were funded by the European Commission. Some of the highlights from these programmes are summarised in this paper, as well as highlights from other programmes funded by national programmes or by industry. Furthermore, a concise summary of the CEAS-ASC workshop "Atmospheric and Ground Effects on Aircraft Noise" held in Seville, Spain in September 2013 is included in this report. Enquiries concerning all contributions should be addressed to the authors who are given at the end of each subsection. This issue of the "highlights" paper is dedicated to the memory of Prof. John A. Fitzpatrick, Professor of Mechanical Engineering, Trinity College Dublin, and a valued member of the Aeroacoustics Specialists Committee. John passed away in September 2012 and is fondly missed across the globe by the friends he made in the Aeroacoustics Community. This paper is edited by PhD graduates and colleagues of John's who conduct research in aeroacoustics, inspired by his thirst for knowledge.

Tobacco Industry Influence on Science and Scientists in Germany

PubMed Central

Grüning, Thilo; Gilmore, Anna B.; McKee, Martin

2006-01-01

Using tobacco industry documents, we examined how and why the tobacco industry sought to influence science and scientists in Germany as a possible factor in explaining the German opposition to stricter tobacco regulation. Smoking and health research programs were organized both separately by individual tobacco companies and jointly through their German trade organization. An extensive network of scientists and scientific institutions with tobacco industry links was developed. Science was distorted in 5 ways: suppression, dilution, distraction, concealment, and manipulation. The extent of tobacco industry influence over the scientific establishment in Germany is profound. The industry introduced serious bias that probably influenced scientific and public opinion in Germany. This influence likely undermined efforts to control tobacco use. PMID:16317203

Periodontal health: CPITN as a promotional strategy.

PubMed

Croxson, L J; Purdell-Lewis, D

1994-10-01

Community and individual involvement are essential needs in preventive programmes for periodontal health. Campaigns should be directed towards a better individual understanding of the importance of healthy gum tissues if a functional healthy dentition is to be retained over a lifetime. Effective awareness campaigns require not only participation and education of the general public, but also all levels of health care professionals. Awareness programmes need to be carefully planned and their messages clear, non-conflicting and regularly reinforced. The complete programme should be based on, and include, specific aims, goals, strategies, monitoring and evaluation. Oral health and hygiene promotion campaigns need careful coordination between the relevant agencies or institutions involved in their implementation, such as government agencies, professional associations, industry, aid groups and education organisations.

High-Tech Opens Doors.

ERIC Educational Resources Information Center

Eichleay, Kristen; Pressman, Harvey

1987-01-01

Exemplary projects which help disabled people use technology (particularly computers) expand their employment opportunities include: Project Entry (Seattle); Georgia Computer Programmer Project (Atlanta); Perkins Project with Industry (Watertown, Massachusetts); Project Byte (Newton Massachusetts); Technology Relevant to You (St. Louis); Special…

A New Venture in Graduate Education: Co-Op Ph.D. Programme in Chemical Engineering.

ERIC Educational Resources Information Center

Fahidy, Thomas Z.

1980-01-01

Describes a cooperative Ph.D. program at the University of Waterloo, Ontario, Canada, in which industrial and governmental employers participate with the Department of Chemical Engineering in training chemical engineers. (CS)

Electronic Dissemination of UN Agency Information.

ERIC Educational Resources Information Center

Stratford, Jean Slemmons; Stratford, Juri

1997-01-01

Highlights information, available electronically, about products and services by the United Nations (UN), UN Development Programme, High Commission for Refugees, UNICEF, Fund for Population Activities, Economic Commissions, Industrial Development Organization, International Labor Organization, UNESCO, Environment Program, World Meteorological…

Simulation For Task Practice in Technical Training.

ERIC Educational Resources Information Center

Mallory, W. J.

1981-01-01

Describes two programs used by the Ford Motor Company to train manufacturing skilled trades personnel. Programmable Controller Maintenance Training Program for Industrial Technicians and Troubleshooting Strategy Program use simulation and provide improved task performance after training. (JOW)

Final report, robotics in construction.

DOT National Transportation Integrated Search

1985-01-01

The use of programmable robots for various kinds of repetitive and hazardous jobs in manufacturing industries is well established. However, their use for other tasks, as in construction, is still in a developmental stage, but is growing rapidly. Desc...

East Europe Report, Economic and Industrial Affairs, No. 2400.

DTIC Science & Technology

1983-05-18

ducts, such as, for instance, oil, natural gas , coal, steel and cement. The socialist countries participate in large-scale successful joint programs of...which there are not many in international practice. Regarding their impact and significance, the joint construction and integration of natural gas ...separators; —reduced pollution (fallout of flue ashes and concentration of gaseous pol- lutants, particularly SO2 and N0X in ground layers of the

Gas Sensors Characterization and Multilayer Perceptron (MLP) Hardware Implementation for Gas Identification Using a Field Programmable Gate Array (FPGA)

PubMed Central

Benrekia, Fayçal; Attari, Mokhtar; Bouhedda, Mounir

2013-01-01

This paper develops a primitive gas recognition system for discriminating between industrial gas species. The system under investigation consists of an array of eight micro-hotplate-based SnO2 thin film gas sensors with different selectivity patterns. The output signals are processed through a signal conditioning and analyzing system. These signals feed a decision-making classifier, which is obtained via a Field Programmable Gate Array (FPGA) with Very High-Speed Integrated Circuit Hardware Description Language. The classifier relies on a multilayer neural network based on a back propagation algorithm with one hidden layer of four neurons and eight neurons at the input and five neurons at the output. The neural network designed after implementation consists of twenty thousand gates. The achieved experimental results seem to show the effectiveness of the proposed classifier, which can discriminate between five industrial gases. PMID:23529119

Structural equation modelling of lower back pain due to whole-body vibration exposure in the construction industry.

PubMed

Vitharana, Vitharanage Hashini Paramitha; Chinda, Thanwadee

2017-09-21

Whole-body vibration (WBV) exposure is a health hazard among workers, causing lower back pain (LBP) in the construction industry. This study examines key factors affecting LBP due to WBV exposure using exploratory factor analysis and structural equation modelling. The results confirm five key factors (equipment, job related, organizational, personal, social context) with their 17 associated items. The organizational factor is found the most important, as it influences the other four factors. The results also show that appropriate seat type, specific training programme, job rotation, workers' satisfaction and workers' physical condition are crucial in reducing LBP due to WBV exposure. Moreover, provision of new machines without proper training and good working condition might not help reduce LBP due to WBV exposure. The results help the construction companies to better understand key factors affecting LBP due to WBV exposure, and to plan for a better health improvement programme.

Joint implementation: Biodiversity and greenhouse gas offsets

NASA Astrophysics Data System (ADS)

Cutright, Noel J.

1996-11-01

One of the most pressing environmental issues today is the possibility that projected increases in global emissions of greenhouse gases from increased deforestation, development, and fossil-fuel combustion could significantly alter global climate patterns. Under the terms of the United Nations Framework Convention on Climate Change, signed in Rio de Janeiro during the June 1992 Earth Summit, the United States and other industrialized countries committed to balancing greenhouse gas emissions at 1990 levels in the year 2000. Included in the treaty is a provision titled “Joint Implementation,” whereby industrialized countries assist developing countries in jointly modifying long-term emission trends, either through emission reductions or by protecting and enhancing greenhouse gas sinks (carbon sequestration). The US Climate Action Plan, signed by President Clinton in 1993, calls for voluntary climate change mitigation measures by various sectors, and the action plan included a new program, the US Initiative on Joint Implementation. Wisconsin Electric decided to invest in a Jl project because its concept encourages creative, cost-effective solutions to environmental problems through partnering, international cooperation, and innovation. The project chosen, a forest preservation and management effort in Belize, will sequester more than five million tons of carbon dioxide over a 40-year period, will become economically selfsustaining after ten years, and will have substantial biodiversity benefits.

In-field implementation of impedance-based structural health monitoring for insulated rail joints

NASA Astrophysics Data System (ADS)

Albakri, Mohammad I.; Malladi, V. V. N. Sriram; Woolard, Americo G.; Tarazaga, Pablo A.

2017-04-01

Track defects are a major safety concern for the railroad industry. Among different track components, insulated rail joints, which are widely used for signaling purposes, are considered a weak link in the railroad track. Several joint-related defects have been identified by the railroad community, including rail wear, torque loss, and joint bar breakage. Current track inspection techniques rely on manual and visual inspection or on specially equipped testing carts, which are costly, timeconsuming, traffic disturbing, and prone to human error. To overcome the aforementioned limitations, the feasibility of utilizing impedance-based structural health monitoring for insulated rail joints is investigated in this work. For this purpose, an insulated joint, provided by Koppers Inc., is instrumented with piezoelectric transducers and assembled with 136 AREA rail plugs. The instrumented joint is then installed and tested at the Facility for Accelerated Service Testing, Transportation Technology Center Inc. The effects of environmental and operating conditions on the measured impedance signatures are investigated through a set of experiments conducted at different temperatures and loading conditions. The capabilities of impedance-based SHM to detect several joint-related damage types are also studied by introducing reversible mechanical defects to different joint components.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Weckend, Stephanie; Wade, Andreas; Heath, Garvin

Solar photovoltaic (PV) deployment has grown at unprecedented rates since the early 2000s. As the global PV market increases, so will the volume of decommissioned PV panels, and large amounts of annual waste are anticipated by the early 2030s. Growing PV panel waste presents a new environmental challenge, but also unprecedented opportunities to create value and pursue new economic avenues. This report, prepared jointly by the International Renewable Energy Agency (IRENA) and the International Energy Agency Photovoltaic Power Systems Programme (IEA-PVPS), is the first-ever projection of PV panel waste volumes to 2050. It highlights that recycling or repurposing solar PVmore » panels at the end of their roughly 30-year lifetime can unlock an estimated stock of 78 million tonnes of raw materials and other valuable components globally by 2050. If fully injected back into the economy, the value of the recovered material could exceed USD 15 billion by 2050. Sectors like PV recycling will be essential in the world's transition to a sustainable, economically viable and increasingly renewables-based energy future. To unlock the benefits of such PV end-of-life industries, the institutional groundwork must be laid in time to meet the expected surge in panel waste. Policy action is needed to address the challenges ahead, with enabling frameworks being adapted to the needs and circumstances of each region or country.« less

Sustainable Cities Programme: a joint UN-HABITAT-UNEP facility on the urban environment with participation of the Dutch government.

PubMed

Gebre-Egziabher, Axumite

2004-06-01

The fundamental objective of the Sustainable Cities Programme is to promote environmentally sustainable local development to more fully realize the vital contributions that urban areas make to over-all social and economic development by: (1) enhancing efficiency in the use of local environmental resources, reducing environmental risks, and strengthening application of environmental conventions and agreements with growing regard to the Climate Change Protocol; (2) reducing poverty by promoting more equitable access to resources and environmental services; (3) mobilizing and strengthening local capacities to plan, co-ordinate, and manage sustainable local development in partnership; and (4) combining the complementary strengths of UN-HABITAT, UNEP, and other partners in support of Agenda 21, and the Habitat Agenda sustainable development commitments including improved local environmental governance.

Focusing on changing clinical practice to enhance rational prescribing--collaboration and networking enable comprehensive approaches.

PubMed

Helin-Salmivaara, Arja; Huupponen, Risto; Klaukka, Timo; Hoppu, Kalle

2003-10-01

Most western societies are enhancing rational pharmacotherapy to get best value for the constantly increasing expenditure on drugs. Government bodies and the medical profession took joint responsibility for the education programme for rational prescribing, launched in Finland at the end of the 1990s. The goals were to enhance critical thinking, and when appropriate, change prescribing behaviour. Various approaches that included evidence-based continuing medical education (CME), implementing clinical guidelines, delivering information, and providing prescribing feedback were used simultaneously. The commitment of the stakeholders and participants has been strong and the approaches have succeeded even though there is no clear outcome measure. The Government has recently decided to continue and widen the process, which started as a pilot programme, on a tight budget.

Sex Differences in Proximal Control of the Knee Joint

PubMed Central

Mendiguchia, Jurdan; Ford, Kevin R.; Quatman, Carmen E.; Alentorn-Geli, Eduard; Hewett, Timothy E.

2014-01-01

Following the onset of maturation, female athletes have a significantly higher risk for anterior cruciate ligament (ACL) injury compared with male athletes. While multiple sex differences in lower-extremity neuromuscular control and biomechanics have been identified as potential risk factors for ACL injury in females, the majority of these studies have focused specifically on the knee joint. However, increasing evidence in the literature indicates that lumbopelvic (core) control may have a large effect on knee-joint control and injury risk. This review examines the published evidence on the contributions of the trunk and hip to knee-joint control. Specifically, the sex differences in potential proximal controllers of the knee as risk factors for ACL injury are identified and discussed. Sex differences in trunk and hip biomechanics have been identified in all planes of motion (sagittal, coronal and transverse). Essentially, female athletes show greater lateral trunk displacement, altered trunk and hip flexion angles, greater ranges of trunk motion, and increased hip adduction and internal rotation during sport manoeuvres, compared with their male counterparts. These differences may increase the risk of ACL injury among female athletes. Prevention programmes targeted towards trunk and hip neuromuscular control may decrease the risk for ACL injuries. PMID:21688868

Effects of aquatic exercise on flexibility, strength and aerobic fitness in adults with osteoarthritis of the hip or knee.

PubMed

Wang, Tsae-Jyy; Belza, Basia; Elaine Thompson, F; Whitney, Joanne D; Bennett, Kim

2007-01-01

This paper reports a study of the effects of aquatic exercise on physical fitness (flexibility, strength and aerobic fitness), self-reported physical functioning and pain in adults with osteoarthritis of the hip or knee. Osteoarthritis is a common cause of disability and a primary reason for hip and knee joint replacement. Exercise is important for preventing and/or managing the functional limitations associated with joint disease. Aquatic exercise is thought to be beneficial and is often recommended for people with osteoarthritis; however, few studies have examined the effects on people with osteoarthritis, and these have yielded inconsistent results. A two-group randomized controlled trial with a convenience sample was used. Participants were recruited from community sources and randomly assigned to a 12-week aquatic programme or a non-exercise control condition. Data for 38 participants were collected at baseline, week 6, and week 12 during 2003 and 2004. Instruments were a standard plastic goniometer, a handheld dynamometer, the 6-minute walk test, the multidimensional Health Assessment Questionnaire, and a visual analogue scale for pain. Repeated measures analysis of variance showed that aquatic exercise statistically significantly improved knee and hip flexibility, strength and aerobic fitness, but had no effect on self-reported physical functioning and pain. The exercise adherence rate was 81.7%, and no exercise-related adverse effect was observed or reported. Beneficial short-term effects of aquatic exercise were found in adults with osteoarthritis of the hip or knee. Although the programme may not offer pain relief or self-reported improvements in physical functioning, results suggest that aquatic exercise does not worsen the joint condition or result in injury. Nurses engaging in disease management and health promotion for these patients should consider recommending or implementing aquatic classes for patients.

A comparison of medical and pharmacy students' knowledge and skills of pharmacology and pharmacotherapy

PubMed Central

Keijsers, Carolina J P W; Brouwers, Jacobus R B J; de Wildt, Dick J; Custers, Eugene J F M; ten Cate, Olle Th J; Hazen, Ankie C M; Jansen, Paul A F

2014-01-01

Aim Pharmacotherapy might be improved if future pharmacists and physicians receive a joint educational programme in pharmacology and pharmacotherapeutics. This study investigated whether there are differences in the pharmacology and pharmacotherapy knowledge and skills of pharmacy and medical students after their undergraduate training. Differences could serve as a starting point from which to develop joint interdisciplinary educational programmes for better prescribing. Methods In a cross-sectional design, the knowledge and skills of advanced pharmacy and medical students were assessed, using a standardized test with three domains (basic pharmacology knowledge, clinical or applied pharmacology knowledge and pharmacotherapy skills) and eight subdomains (pharmacodynamics, pharmacokinetics, interactions and side-effects, Anatomical Therapeutic Chemical Classification groups, prescribing, prescribing for special groups, drug information, regulations and laws, prescription writing). Results Four hundred and fifty-one medical and 151 pharmacy students were included between August 2010 and July 2012. The response rate was 81%. Pharmacy students had better knowledge of basic pharmacology than medical students (77.0% vs. 68.2% correct answers; P < 0.001, δ = 0.88), whereas medical students had better skills than pharmacy students in writing prescriptions (68.6% vs. 50.7%; P < 0.001, δ = 0.57). The two groups of students had similar knowledge of applied pharmacology (73.8% vs. 72.2%, P = 0.124, δ = 0.15). Conclusions Pharmacy students have better knowledge of basic pharmacology, but not of the application of pharmacology knowledge, than medical students, whereas medical students are better at writing prescriptions. Professional differences in knowledge and skills therefore might well stem from their undergraduate education. Knowledge of these differences could be harnessed to develop a joint interdisciplinary education for both students and professionals. PMID:24698099

A comparison of medical and pharmacy students' knowledge and skills of pharmacology and pharmacotherapy.

PubMed

Keijsers, Carolina J P W; Brouwers, Jacobus R B J; de Wildt, Dick J; Custers, Eugene J F M; Ten Cate, Olle Th J; Hazen, Ankie C M; Jansen, Paul A F

2014-10-01

Pharmacotherapy might be improved if future pharmacists and physicians receive a joint educational programme in pharmacology and pharmacotherapeutics. This study investigated whether there are differences in the pharmacology and pharmacotherapy knowledge and skills of pharmacy and medical students after their undergraduate training. Differences could serve as a starting point from which to develop joint interdisciplinary educational programmes for better prescribing. In a cross-sectional design, the knowledge and skills of advanced pharmacy and medical students were assessed, using a standardized test with three domains (basic pharmacology knowledge, clinical or applied pharmacology knowledge and pharmacotherapy skills) and eight subdomains (pharmacodynamics, pharmacokinetics, interactions and side-effects, Anatomical Therapeutic Chemical Classification groups, prescribing, prescribing for special groups, drug information, regulations and laws, prescription writing). Four hundred and fifty-one medical and 151 pharmacy students were included between August 2010 and July 2012. The response rate was 81%. Pharmacy students had better knowledge of basic pharmacology than medical students (77.0% vs. 68.2% correct answers; P < 0.001, δ = 0.88), whereas medical students had better skills than pharmacy students in writing prescriptions (68.6% vs. 50.7%; P < 0.001, δ = 0.57). The two groups of students had similar knowledge of applied pharmacology (73.8% vs. 72.2%, P = 0.124, δ = 0.15). Pharmacy students have better knowledge of basic pharmacology, but not of the application of pharmacology knowledge, than medical students, whereas medical students are better at writing prescriptions. Professional differences in knowledge and skills therefore might well stem from their undergraduate education. Knowledge of these differences could be harnessed to develop a joint interdisciplinary education for both students and professionals. © 2014 The British Pharmacological Society.

Joint Counterdrug Operations

DTIC Science & Technology

1998-02-17

II-8 • Marijuana (Cannabis) Industry ................................................................................ II-9...High Intensity Drug Trafficking Areas ................................................................ III-26 • Organized Crime Drug Enforcement...IV-4 • Legal or Regulatory Considerations ....................................................................... IV-5 • Major

Eradication of tephritid fruit fly pest populations: outcomes and prospects.

PubMed

Suckling, David Maxwell; Kean, John M; Stringer, Lloyd D; Cáceres-Barrios, Carlos; Hendrichs, Jorge; Reyes-Flores, Jesus; Dominiak, Bernard C

2016-03-01

The number of insect eradication programmes is rising in response to globalisation. A database of arthropod and plant pathogen eradications covers 1050 incursion responses, with 928 eradication programmes on 299 pest and disease taxa in 104 countries (global eradication database b3.net.nz/gerda). A subset of the database was assembled with 211 eradication or response programmes against 17 species of fruit flies (Tephritidae) in 31 countries, in order to investigate factors affecting the outcome. The failure rate for fruit fly eradication programmes was about 7%, with 0% for Ceratitis capitata (n = 85 programmes) and 0% for two Anastrepha species (n = 12 programmes), but 12% for 13 Bactrocera species (n = 108 programmes). A number of intended eradication programmes against long-established populations were not initiated because of cost and other considerations, or evolved during the planning phase into suppression programmes. Cost was dependent on area, ranged from $US 0.1 million to $US 240 million and averaged about $US 12 million (normalised to $US in 2012). In addition to the routine use of surveillance networks, quarantine and fruit destruction, the key tactics used in eradication programmes were male annihilation, protein bait sprays (which can attract both sexes), fruit destruction and the sterile insect technique. Eradication success generally required the combination of several tactics applied on an area-wide basis. Because the likelihood of eradication declines with an increase in the area infested, it pays to invest in effective surveillance networks that allow early detection and delimitation while invading populations are small, thereby greatly favouring eradication success. © 2014 Society of Chemical Industry.

Automated discovery of safety and efficacy concerns for joint & muscle pain relief treatments from online reviews.

PubMed

Adams, David Z; Gruss, Richard; Abrahams, Alan S

2017-04-01

Product issues can cost companies millions in lawsuits and have devastating effects on a firm's sales, image and goodwill, especially in the era of social media. The ability for a system to detect the presence of safety and efficacy (S&E) concerns early on could not only protect consumers from injuries due to safety hazards, but could also mitigate financial damage to the manufacturer. Prior studies in the field of automated defect discovery have found industry-specific techniques appropriate to the automotive, consumer electronics, home appliance, and toy industries, but have not investigated pain relief medicines and medical devices. In this study, we focus specifically on automated discovery of S&E concerns in over-the-counter (OTC) joint and muscle pain relief remedies and devices. We select a dataset of over 32,000 records for three categories of Joint & Muscle Pain Relief treatments from Amazon's online product reviews, and train "smoke word" dictionaries which we use to score holdout reviews, for the presence of safety and efficacy issues. We also score using conventional sentiment analysis techniques. Compared to traditional sentiment analysis techniques, we found that smoke term dictionaries were better suited to detect product concerns from online consumer reviews, and significantly outperformed the sentiment analysis techniques in uncovering both efficacy and safety concerns, across all product subcategories. Our research can be applied to the healthcare and pharmaceutical industry in order to detect safety and efficacy concerns, reducing risks that consumers face using these products. These findings can be highly beneficial to improving quality assurance and management in joint and muscle pain relief. Copyright © 2017 Elsevier B.V. All rights reserved.

A water pumping control system with a programmable logic controller (PLC) and industrial wireless modules for industrial plants--an experimental setup.

PubMed

Bayindir, Ramazan; Cetinceviz, Yucel

2011-04-01

This paper describes a water pumping control system that is designed for production plants and implemented in an experimental setup in a laboratory. These plants contain harsh environments in which chemicals, vibrations or moving parts exist that could potentially damage the cabling or wires that are part of the control system. Furthermore, the data has to be transferred over paths that are accessible to the public. The control systems that it uses are a programmable logic controller (PLC) and industrial wireless local area network (IWLAN) technologies. It is implemented by a PLC, an communication processor (CP), two IWLAN modules, and a distributed input/output (I/O) module, as well as the water pump and sensors. Our system communication is based on an Industrial Ethernet and uses the standard Transport Control Protocol/Internet Protocol for parameterisation, configuration and diagnostics. The main function of the PLC is to send a digital signal to the water pump to turn it on or off, based on the tank level, using a pressure transmitter and inputs from limit switches that indicate the level of the water in the tank. This paper aims to provide a convenient solution in process plants where cabling is not possible. It also has lower installation and maintenance cost, provides reliable operation, and robust and flexible construction, suitable for industrial applications. Copyright © 2010 ISA. Published by Elsevier Ltd. All rights reserved.

Programmable Logic Controller Modification Attacks for use in Detection Analysis

DTIC Science & Technology

2014-03-27

and J. Lowe, “The Myths and Facts Behind Cyber Security Risks for Industrial Control Systems ,” in Proceedings of the VDE Kongress, vol. 116, 2004. [13...Feb 2014 Date 20 Feb 2014 Date 20 Feb 2014 Date AFIT-ENG-14-M-66 Abstract Unprotected Supervisory Control and Data Acquisition (SCADA) systems offer...control and monitor physical industrial processes. Although attacks targeting SCADA systems have increased, there has been little work exploring the

[Sanitary education of workers of bakeries and pastry enterprises].

PubMed

Krasil'shchikov, M I; Nemets, M G; Novikova, O V; Gavrilenko, E V; Osipova, E M; Osinova, T I

2000-01-01

The paper presents experience with sanitary education of workers from food industrial enterprises. The study revealed a number of disadvantages of the methodological aspect of sanitary education of these workers. A sanitary education programme has been worked out for workers engaged in food and food processing industries (production of bread, baked goods, and confectionery) and approved by the State Sanitary and Epidemiological Surveillance Department), Ministry of Health of Russia on March 1999.

The EU Arms Embargo on China, from 2001 to the Present: Implications for the United States

DTIC Science & Technology

2008-06-01

navigation, tourism , and a “new mechanism for industrial policy dialogue.” In January 2004 China and France agreed to a “joint declaration to deepen...claim to contribute materially to the key defense issues in the region.”15 Second, European defense industries lack the massive domestic sales of...interests that lies at the heart of United States laws for transatlantic defense cooperation at both the governmental and industrial levels and would

Using analogues to quantify geological uncertainty in stochastic reserve modelling

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wells, B.; Brown, I.

1995-08-01

The petroleum industry seeks to minimize exploration risk by employing the best possible expertise, methods and tools. Is it possible to quantify the success of this process of risk reduction? Due to inherent uncertainty in predicting geological reality and due to changing environments for hydrocarbon exploration, it is not enough simply to record the proportion of successful wells drilled; in various parts of the world it has been noted that pseudo-random drilling would apparently have been as successful as the actual drilling programme. How, then, should we judge the success of risk reduction? For many years the E&P industry hasmore » routinely used Monte Carlo modelling to generate a probability distribution for prospect reserves. One aspect of Monte Carlo modelling which has received insufficient attention, but which is essential for quantifying risk reduction, is the consistency and repeatability with which predictions can be made. Reducing the subjective element inherent in the specification of geological uncertainty allows better quantification of uncertainty in the prediction of reserves, in both exploration and appraisal. Building on work reported at the AAPG annual conventions in 1994 and 1995, the present paper incorporates analogue information with uncertainty modelling. Analogues provide a major step forward in the quantification of risk, but their significance is potentially greater still. The two principal contributors to uncertainty in field and prospect analysis are the hydrocarbon life-cycle and the geometry of the trap. These are usually treated separately. Combining them into a single model is a major contribution to the reduction risk. This work is based in part on a joint project with Oryx Energy UK Ltd., and thanks are due in particular to Richard Benmore and Mike Cooper.« less

Prototype pushing robot for emplacing vitrified waste canisters into horizontal disposal drifts

DOE Office of Scientific and Technical Information (OSTI.GOV)

Londe, L.; Seidler, W.K.; Bosgiraud, J.M.

2007-07-01

Within the French Underground Disposal concept, as described in ANDRA's (Agence Nationale pour la Gestion des Dechets Radioactifs) Dossier 2005, the Pushing Robot is an application envisaged for the emplacement (and the potential retrieval) of 'Vitrified waste packages', also called 'C type packages'. ANDRA has developed a Prototype Pushing Robot within the framework of the ESDRED Project (Engineering Studies and Demonstration of Repository Design) which is co-funded by the European Commission as part of the sixth EURATOM Research and Training Framework Programme (FP6) on nuclear energy (2002 - 2006). The Rationale of the Pushing Robot technology comes from various considerations,more » including the need for (1) a simple and robust system, capable of moving (and potentially retrieving) on up to 40 metres (m), a 2 tonne C type package (mounted on ceramic sliding runners) inside the carbon steel sleeve constituting the liner (and rock support) of a horizontal disposal cell, (2) small annular clearances between the package and the liner, (3) compactness of the device to be transferred from surface to underground, jointly with the package, inside a shielding cask, and (4) remote controlled operations for the sake of radioprotection. The initial design, based on gripping supports, has been replaced by a 'technical variant' based on inflatable toric jacks. It was then possible, using a test bench, to check that the Pushing Robot worked properly. Steps as high as 7 mm were successfully cleared by a dummy package pushed by the Prototype.. Based on the lessons learned by ANDRA's regarding the Prototype Pushing Robot, a new Scope of Work is being written for the Contract concerning an Industrial Scale Demonstrator. The Industrial Scale Demonstration should be completed by the end of the second Quarter of 2008. (authors)« less