Integrating Quantitative and Qualitative Results in Health Science Mixed Methods Research Through Joint Displays.

PubMed

Guetterman, Timothy C; Fetters, Michael D; Creswell, John W

2015-11-01

Mixed methods research is becoming an important methodology to investigate complex health-related topics, yet the meaningful integration of qualitative and quantitative data remains elusive and needs further development. A promising innovation to facilitate integration is the use of visual joint displays that bring data together visually to draw out new insights. The purpose of this study was to identify exemplar joint displays by analyzing the various types of joint displays being used in published articles. We searched for empirical articles that included joint displays in 3 journals that publish state-of-the-art mixed methods research. We analyzed each of 19 identified joint displays to extract the type of display, mixed methods design, purpose, rationale, qualitative and quantitative data sources, integration approaches, and analytic strategies. Our analysis focused on what each display communicated and its representation of mixed methods analysis. The most prevalent types of joint displays were statistics-by-themes and side-by-side comparisons. Innovative joint displays connected findings to theoretical frameworks or recommendations. Researchers used joint displays for convergent, explanatory sequential, exploratory sequential, and intervention designs. We identified exemplars for each of these designs by analyzing the inferences gained through using the joint display. Exemplars represented mixed methods integration, presented integrated results, and yielded new insights. Joint displays appear to provide a structure to discuss the integrated analysis and assist both researchers and readers in understanding how mixed methods provides new insights. We encourage researchers to use joint displays to integrate and represent mixed methods analysis and discuss their value. © 2015 Annals of Family Medicine, Inc.

Integrating Quantitative and Qualitative Results in Health Science Mixed Methods Research Through Joint Displays

PubMed Central

Guetterman, Timothy C.; Fetters, Michael D.; Creswell, John W.

2015-01-01

PURPOSE Mixed methods research is becoming an important methodology to investigate complex health-related topics, yet the meaningful integration of qualitative and quantitative data remains elusive and needs further development. A promising innovation to facilitate integration is the use of visual joint displays that bring data together visually to draw out new insights. The purpose of this study was to identify exemplar joint displays by analyzing the various types of joint displays being used in published articles. METHODS We searched for empirical articles that included joint displays in 3 journals that publish state-of-the-art mixed methods research. We analyzed each of 19 identified joint displays to extract the type of display, mixed methods design, purpose, rationale, qualitative and quantitative data sources, integration approaches, and analytic strategies. Our analysis focused on what each display communicated and its representation of mixed methods analysis. RESULTS The most prevalent types of joint displays were statistics-by-themes and side-by-side comparisons. Innovative joint displays connected findings to theoretical frameworks or recommendations. Researchers used joint displays for convergent, explanatory sequential, exploratory sequential, and intervention designs. We identified exemplars for each of these designs by analyzing the inferences gained through using the joint display. Exemplars represented mixed methods integration, presented integrated results, and yielded new insights. CONCLUSIONS Joint displays appear to provide a structure to discuss the integrated analysis and assist both researchers and readers in understanding how mixed methods provides new insights. We encourage researchers to use joint displays to integrate and represent mixed methods analysis and discuss their value. PMID:26553895

20 CFR 900.6 - Offices.

Code of Federal Regulations, 2012 CFR

2012-04-01

... 20 Employees' Benefits 4 2012-04-01 2012-04-01 false Offices. 900.6 Section 900.6 Employees' Benefits JOINT BOARD FOR THE ENROLLMENT OF ACTUARIES STATEMENT OF ORGANIZATION § 900.6 Offices. The Joint... post office address is Joint Board for the Enrollment of Actuaries, c/o Department of the Treasury...

20 CFR 900.6 - Offices.

Code of Federal Regulations, 2013 CFR

2013-04-01

... 20 Employees' Benefits 4 2013-04-01 2013-04-01 false Offices. 900.6 Section 900.6 Employees' Benefits JOINT BOARD FOR THE ENROLLMENT OF ACTUARIES STATEMENT OF ORGANIZATION § 900.6 Offices. The Joint... post office address is Joint Board for the Enrollment of Actuaries, c/o Department of the Treasury...

20 CFR 900.6 - Offices.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 20 Employees' Benefits 4 2014-04-01 2014-04-01 false Offices. 900.6 Section 900.6 Employees' Benefits JOINT BOARD FOR THE ENROLLMENT OF ACTUARIES STATEMENT OF ORGANIZATION § 900.6 Offices. The Joint... post office address is Joint Board for the Enrollment of Actuaries, c/o Department of the Treasury...

20 CFR 900.6 - Offices.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 20 Employees' Benefits 3 2011-04-01 2011-04-01 false Offices. 900.6 Section 900.6 Employees' Benefits JOINT BOARD FOR THE ENROLLMENT OF ACTUARIES STATEMENT OF ORGANIZATION § 900.6 Offices. The Joint... post office address is Joint Board for the Enrollment of Actuaries, c/o Department of the Treasury...

Defense Acquisition and the Case of the Joint Capabilities Technology Demonstration Office: Ad Hoc Problem Solving as a Mechanism for Adaptive Change

DTIC Science & Technology

2013-10-01

pmlkploba=obmloq=pbofbp= Defense Acquisition and the Case of the Joint Capabilities Technology Demonstration Office: Ad Hoc Problem Solving as a...of the Joint Capabilities Technology Demonstration Office: Ad Hoc Problem Solving as a Mechanism for Adaptive Change 5a. CONTRACT NUMBER 5b. GRANT...findings of our study exploring what drives successful organizational adaptation in the context of technology transition and acquisition within the

2011 Joint Program Executive Office for Chemical and Biological Defense Advance Planning Briefing for Industry (APBI) Held in Baltimore, Maryland on September 7-9, 2011

DTIC Science & Technology

2011-09-09

Chemical and Biological Defense Defense Threat Reduction Agency (DTRA)/Joint Science & Technology Office (JSTO) Dr. Alan Rudolph , Director, Chemical...Mr. Douglas W. Bryce 9:05 am – 9:45 am Dr. Alan Rudolph Director, Chemical and Biological Technologies Directorate, Defense Threat Reduction...Joint Science and Technology Office for Chemical and Biological Defense Dr. Alan S. Rudolph Mr. David K. Grimm Acting Heidi Shyu Joint Combat

76 FR 32332 - Office of Thrift Supervision Integration; Dodd-Frank Act Implementation; Correction

Federal Register 2010, 2011, 2012, 2013, 2014

2011-06-06

..., and 34 [Docket ID OCC-2011-0006] RIN 1557-AD41 Office of Thrift Supervision Integration; Dodd-Frank... Thrift Supervision Integration; Dodd- Frank Act Implementation.'' Inadvertently, an incorrect E-mail...) requesting comment on its notice of proposed rulemaking entitled ``Office of Thrift Supervision Integration...

22 CFR 41.3 - Waiver by joint action of consular and immigration officers of passport and/or visa requirements.

Code of Federal Regulations, 2010 CFR

2010-04-01

... immigration officers of passport and/or visa requirements. 41.3 Section 41.3 Foreign Relations DEPARTMENT OF... Passport and Visas Not Required for Certain Nonimmigrants § 41.3 Waiver by joint action of consular and immigration officers of passport and/or visa requirements. Under the authority of INA 212(d)(4), the...

22 CFR 41.3 - Waiver by joint action of consular and immigration officers of passport and/or visa requirements.

Code of Federal Regulations, 2012 CFR

2012-04-01

... immigration officers of passport and/or visa requirements. 41.3 Section 41.3 Foreign Relations DEPARTMENT OF... Passport and Visas Not Required for Certain Nonimmigrants § 41.3 Waiver by joint action of consular and immigration officers of passport and/or visa requirements. Under the authority of INA 212(d)(4), the...

22 CFR 41.3 - Waiver by joint action of consular and immigration officers of passport and/or visa requirements.

Code of Federal Regulations, 2014 CFR

2014-04-01

... immigration officers of passport and/or visa requirements. 41.3 Section 41.3 Foreign Relations DEPARTMENT OF... Passport and Visas Not Required for Certain Nonimmigrants § 41.3 Waiver by joint action of consular and immigration officers of passport and/or visa requirements. Under the authority of INA 212(d)(4), the...

22 CFR 41.3 - Waiver by joint action of consular and immigration officers of passport and/or visa requirements.

Code of Federal Regulations, 2011 CFR

2011-04-01

... immigration officers of passport and/or visa requirements. 41.3 Section 41.3 Foreign Relations DEPARTMENT OF... Passport and Visas Not Required for Certain Nonimmigrants § 41.3 Waiver by joint action of consular and immigration officers of passport and/or visa requirements. Under the authority of INA 212(d)(4), the...

22 CFR 41.3 - Waiver by joint action of consular and immigration officers of passport and/or visa requirements.

Code of Federal Regulations, 2013 CFR

2013-04-01

... immigration officers of passport and/or visa requirements. 41.3 Section 41.3 Foreign Relations DEPARTMENT OF... Passport and Visas Not Required for Certain Nonimmigrants § 41.3 Waiver by joint action of consular and immigration officers of passport and/or visa requirements. Under the authority of INA 212(d)(4), the...

An Analysis of Naval Officers Serving on Joint Duty: The Impact of the 1986 Goldwater-Nichols Act.

DTIC Science & Technology

1996-03-01

accurate modeling. Although it has been shown in earlier chapters that joint professional military education (JPME) plays an important role in an...needed, and completing and reviewing the collection ofinformation . Send comments regarding this burden estimate or any other aspect of this collection...examine the effects of joint duty on an officer’s career, it is first necessary to appreciate the strength and depth of U.S. military culture, and in

Engineering studies on joint bar integrity, part II : finite element analysis

DOT National Transportation Integrated Search

2014-04-02

This paper is the second in a two-part series describing : research sponsored by the Federal Railroad Administration : (FRA) to study the structural integrity of joint bars. In Part I, : observations from field surveys of joint bar inspections : cond...

20 CFR 900.6 - Offices.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 20 Employees' Benefits 3 2010-04-01 2010-04-01 false Offices. 900.6 Section 900.6 Employees' Benefits JOINT BOARD FOR THE ENROLLMENT OF ACTUARIES STATEMENT OF ORGANIZATION § 900.6 Offices. The Joint Board does not maintain offices separate from those of the Departments of the Treasury and Labor. Its...

Integrated, proportionally controlled, and naturally compliant universal joint actuator with controllable stiffness

DOEpatents

Borenstein, Johann; Granosik, Grzegorz

2005-03-22

An apparatus for traversing obstacles having an elongated, round, flexible body that includes a plurality of segments interconnected by an integrated joint actuator assembly. The integrated joint actuator assembly includes a plurality of bellows-type actuators individually coupling adjacent segments to permit pivotal actuation of the apparatus therebetween. A controller is employed to maintain proper positional control and stiffness control while minimize air flow.

76 FR 51014 - National Advisory Committee on Institutional Quality and Integrity, Office of Postsecondary...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-08-17

... DEPARTMENT OF EDUCATION National Advisory Committee on Institutional Quality and Integrity, Office of Postsecondary Education; Meeting AGENCY: National Advisory Committee on Institutional Quality and Integrity, Office of Postsecondary Education, U.S. Department of Education. ACTION: Notice of December 14-16...

Joint Command and Control: Integration Not Interoperability

DTIC Science & Technology

2013-03-01

separate computer and communication equipment. Besides having to engineer interoperability, the Services also must determine the level of...effects.  Determines force responsiveness and allocates resources.5 This thesis argues Joint military operations will never be fully integrated as...processes and systems. Secondly, the limited depth of discussion risks implying (or the reader inferring) the solution is more straightforward than

Welded joints integrity analysis and optimization for fiber laser welding of dissimilar materials

NASA Astrophysics Data System (ADS)

Ai, Yuewei; Shao, Xinyu; Jiang, Ping; Li, Peigen; Liu, Yang; Liu, Wei

2016-11-01

Dissimilar materials welded joints provide many advantages in power, automotive, chemical, and spacecraft industries. The weld bead integrity which is determined by process parameters plays a significant role in the welding quality during the fiber laser welding (FLW) of dissimilar materials. In this paper, an optimization method by taking the integrity of the weld bead and weld area into consideration is proposed for FLW of dissimilar materials, the low carbon steel and stainless steel. The relationships between the weld bead integrity and process parameters are developed by the genetic algorithm optimized back propagation neural network (GA-BPNN). The particle swarm optimization (PSO) algorithm is taken for optimizing the predicted outputs from GA-BPNN for the objective. Through the optimization process, the desired weld bead with good integrity and minimum weld area are obtained and the corresponding microstructure and microhardness are excellent. The mechanical properties of the optimized joints are greatly improved compared with that of the un-optimized welded joints. Moreover, the effects of significant factors are analyzed based on the statistical approach and the laser power (LP) is identified as the most significant factor on the weld bead integrity and weld area. The results indicate that the proposed method is effective for improving the reliability and stability of welded joints in the practical production.

An Adaptive Intelligent Integrated Lighting Control Approach for High-Performance Office Buildings

NASA Astrophysics Data System (ADS)

Karizi, Nasim

An acute and crucial societal problem is the energy consumed in existing commercial buildings. There are 1.5 million commercial buildings in the U.S. with only about 3% being built each year. Hence, existing buildings need to be properly operated and maintained for several decades. Application of integrated centralized control systems in buildings could lead to more than 50% energy savings. This research work demonstrates an innovative adaptive integrated lighting control approach which could achieve significant energy savings and increase indoor comfort in high performance office buildings. In the first phase of the study, a predictive algorithm was developed and validated through experiments in an actual test room. The objective was to regulate daylight on a specified work plane by controlling the blind slat angles. Furthermore, a sensor-based integrated adaptive lighting controller was designed in Simulink which included an innovative sensor optimization approach based on genetic algorithm to minimize the number of sensors and efficiently place them in the office. The controller was designed based on simple integral controllers. The objective of developed control algorithm was to improve the illuminance situation in the office through controlling the daylight and electrical lighting. To evaluate the performance of the system, the controller was applied on experimental office model in Lee et al.'s research study in 1998. The result of the developed control approach indicate a significantly improvement in lighting situation and 1-23% and 50-78% monthly electrical energy savings in the office model, compared to two static strategies when the blinds were left open and closed during the whole year respectively.

Joint Center for Operational Analysis Journal. Volume 12, Issue 2, Summer 2010

DTIC Science & Technology

2010-01-01

Peixoto. In 19X7. then-Major Keen attended Bra- zil’s Command and General Staff Course in Rio de Janeiro . Bra- zil. In 1988, then Captain Floriano...controlling DoD office). • DISTRIBUTION STATEMENT E . Distribution authorized to DoD Components only (fill in reason) (date of determination). Other... basic joint functions that integrate, synchronize, and direct joint operations, which arc: command and control, intelligence, fires, movement and

Senior Student Affairs Officers' Reports of Joint Intra-Institutional Efforts to Support College Students with Mental Illness

ERIC Educational Resources Information Center

Scheidel, Sarah

2016-01-01

The purpose of this sequential mixed-methods study was to explore senior student affairs officers' reports of joint intra-institutional efforts within the past three years to achieve the common goal of supporting the academic and personal success of college students with mental illness. The 20 factors identified by Mattessich, Murray-Close, and…

From intricate to integrated: Biofabrication of articulating joints.

PubMed

Groen, Wilhelmina Margaretha; Diloksumpan, Paweena; van Weeren, Paul René; Levato, Riccardo; Malda, Jos

2017-10-01

Articulating joints owe their function to the specialized architecture and the complex interplay between multiple tissues including cartilage, bone and synovium. Especially the cartilage component has limited self-healing capacity and damage often leads to the onset of osteoarthritis, eventually resulting in failure of the joint as an organ. Although in its infancy, biofabrication has emerged as a promising technology to reproduce the intricate organization of the joint, thus enabling the introduction of novel surgical treatments, regenerative therapies, and new sets of tools to enhance our understanding of joint physiology and pathology. Herein, we address the current challenges to recapitulate the complexity of articulating joints and how biofabrication could overcome them. The combination of multiple materials, biological cues and cells in a layer-by-layer fashion, can assist in reproducing both the zonal organization of cartilage and the gradual transition from resilient cartilage toward the subchondral bone in biofabricated osteochondral grafts. In this way, optimal integration of engineered constructs with the natural surrounding tissues can be obtained. Mechanical characteristics, including the smoothness and low friction that are hallmarks of the articular surface, can be tuned with multi-head or hybrid printers by controlling the spatial patterning of printed structures. Moreover, biofabrication can use digital medical images as blueprints for printing patient-specific implants. Finally, the current rapid advances in biofabrication hold significant potential for developing joint-on-a-chip models for personalized medicine and drug testing or even for the creation of implants that may be used to treat larger parts of the articulating joint. © 2017 The Authors. Journal of Orthopaedic Research Published by Wiley Periodicals, Inc. on behalf of the Orthopaedic Research Society. J Orthop Res 35:2089-2097, 2017. © 2017 The Authors. Journal of Orthopaedic

Defense Acquisition and the Case of the Joint Capabilities Technology Demonstration Office: Ad Hoc Problem Solving as a Mechanism for Adaptive Change

DTIC Science & Technology

2013-04-01

Capabilities Technology Demonstration Office: Ad Hoc Problem Solving as a Mechanism for Adaptive Change Kathryn Aten and John T. Dillard Naval...Defense Acquisition and the Case of the Joint Capabilities Technology Demonstration Office: Ad Hoc Problem Solving as a Mechanism for Adaptive Change...describes the preliminary analysis and findings of our study exploring what drives successful organizational adaptation in the context of technology

Prototype integration of the joint munitions assessment and planning model with the OSD threat methodology

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lynn, R.Y.S.; Bolmarcich, J.J.

The purpose of this Memorandum is to propose a prototype procedure which the Office of Munitions might employ to exercise, in a supportive joint fashion, two of its High Level Conventional Munitions Models, namely, the OSD Threat Methodology and the Joint Munitions Assessment and Planning (JMAP) model. The joint application of JMAP and the OSD Threat Methodology provides a tool to optimize munitions stockpiles. The remainder of this Memorandum comprises five parts. The first is a description of the structure and use of the OSD Threat Methodology. The second is a description of JMAP and its use. The third discussesmore » the concept of the joint application of JMAP and OSD Threat Methodology. The fourth displays sample output of the joint application. The fifth is a summary and epilogue. Finally, three appendices contain details of the formulation, data, and computer code.« less

Joint bleeds in von Willebrand disease patients have significant impact on quality of life and joint integrity: a cross-sectional study.

PubMed

van Galen, K P M; Sanders, Y V; Vojinovic, U; Eikenboom, J; Cnossen, M H; Schutgens, R E G; van der Bom, J G; Fijnvandraat, K; Laros-Van Gorkom, B A P; Meijer, K; Leebeek, F W G; Mauser-Bunschoten, E P

2015-05-01

Joint bleeds (JB) are reported in a minority of patients with von Willebrand disease (VWD) but may lead to structural joint damage. Prevalence, severity and impact of JB in VWD are largely unknown. The aim of this study was to assess JB prevalence, onset, treatment and impact on health-related quality of life (HR-QoL) and joint integrity in moderate and severe VWD. In the Willebrand in the Netherlands study 804 moderate and severe VWD patients [von Willebrand factor (VWF) activity ≤30U dL(-1)] completed a questionnaire on occurrence, sites and consequences of JB. To analyse JB number, onset, treatment and impact on joint integrity we additionally performed a patient-control study on medical file data comparing patients with JB to age, gender, factor VIII (FVIII)- and VWF activity matched VWD patients without JB. Of all VWD patients 23% (184/804) self-reported JB. These 184 patients reported joint damage more often (54% vs. 18%, P < 0.001) and had lower HR-QoL (SF36, P < 0.05) compared to VWD patients not reporting JB. Of 55 patients with available JB data, 65% had the first JB before age 16. These 55 patients used more clotting factor concentrate (CFC; median dose 43 vs. 0 IE FVIII kg(-1) year(-1) , P < 0.001), more often had X-ray joint damage (44% vs. 11%, P = 0.001] and chronic joint pain (44% vs. 18%, P = 0.008) compared to 55 control VWD patients without JB. In conclusion, joint bleeds are reported by 23% of moderate and severe VWD patients, mostly start in childhood, are associated with more CFC use, joint pain, lower HR-QoL and significantly more radiological and self-reported joint damage. © 2015 John Wiley & Sons Ltd.

Joint-operation in water resources project in Indonesia: Integrated or non-integrated

NASA Astrophysics Data System (ADS)

Ophiyandri, Taufika; Istijono, Bambang; Hidayat, Benny

2017-11-01

The construction of large water resources infrastructure project often involved a joint-operation (JO) project between two or more construction companies. The form of JO can be grouped into two categories - an integrated type and a non-integrated type. This paper investigates the reason of forming a JO project made by companies. The specific advantages and problems of JO project is also analysed in this paper. In order to achieve the objectives, three water resources infrastructure projects were selected as case studies. Data was gathered by conducting 11 semi-structured interviews to project owners, contractor managers, and project staffs. Data was analysed by means of content analysis. It was found that the most fundamental factor to form a JO is to win a competition or tender. An integrated model is in favour because it can reduce overhead costs and has a simple management system, while a non-integrated model is selected because it can avoid a sleeping partner and make contractor more responsible for their own job.

Administrative Office Technology. FasTrak Specialization Integrated Technical and Academic Competency (ITAC). Revised.

ERIC Educational Resources Information Center

Ohio State Dept. of Education, Columbus. Div. of Career-Technical and Adult Education.

This document presents the Ohio Integrated Technical and Academic Competency (ITAC) profile for administrative office technology, which is a comprehensive listing of 58 occupational skill competencies deemed essential for Ohio graduates of programs in office technology. The document begins with an introduction to the ITAC system, a list of…

Joint Chiefs of Staff > Directorates > J7 | Joint Force Development

Science.gov Websites

development: Doctrine, Education, Concept Development & Experimentation, Training, Exercises and Lessons Coalition Partners. Joint Education Develop policies governing officer and enlisted Joint Professional Military Education (JPME), and the National Defense University. Direct JPME educational advisory group and

Why Do Staff of Joint-Use Libraries Sometimes Fail to Integrate? Investigating Cultures and Ethics in a Public-Tertiary Joint-Use Library

ERIC Educational Resources Information Center

Calvert, Philip James

2010-01-01

Joint-use libraries have identified staff integration as a problem. Using focus groups, this project investigated the culture, professional ethics, and attitudes of staff in a public-tertiary joint-use library in Auckland, New Zealand. Findings show some difference in organizational cultures, but more variation at the lower level of roles and…

42 CFR 93.217 - Office of Research Integrity or ORI.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 42 Public Health 1 2011-10-01 2011-10-01 false Office of Research Integrity or ORI. 93.217 Section 93.217 Public Health PUBLIC HEALTH SERVICE, DEPARTMENT OF HEALTH AND HUMAN SERVICES HEALTH ASSESSMENTS AND HEALTH EFFECTS STUDIES OF HAZARDOUS SUBSTANCES RELEASES AND FACILITIES PUBLIC HEALTH SERVICE...

Procurement: Government Printing Office Supply of Microfiche to Libraries Disrupted. Report to the Chairman and Vice Chairman of the Joint Committee on Printing, U.S. Congress.

ERIC Educational Resources Information Center

General Accounting Office, Washington, DC. General Government Div.

In this report, the General Accounting Office (GAO) responds to a July 8, 1988, inquiry by the Chairman and Vice Chairman of the Joint Committee on Printing about the Government Printing Office's (GPO) efforts to acquire and supply microfiche copies of government documents to approximately 1,400 depository libraries. In August 1987, GPO had…

42 CFR 93.217 - Office of Research Integrity or ORI.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 42 Public Health 1 2010-10-01 2010-10-01 false Office of Research Integrity or ORI. 93.217 Section 93.217 Public Health PUBLIC HEALTH SERVICE, DEPARTMENT OF HEALTH AND HUMAN SERVICES HEALTH ASSESSMENTS AND HEALTH EFFECTS STUDIES OF HAZARDOUS SUBSTANCES RELEASES AND FACILITIES PUBLIC HEALTH SERVICE POLICIES ON RESEARCH MISCONDUCT Definitions §...

Office automation: The administrative window into the integrated DBMS

NASA Technical Reports Server (NTRS)

Brock, G. H.

1985-01-01

In parallel to the evolution of Management Information Systems from simple data files to complex data bases, the stand-alone computer systems have been migrating toward fully integrated systems serving the work force. The next major productivity gain may very well be to make these highly sophisticated working level Data Base Management Systems (DMBS) serve all levels of management with reports of varying levels of detail. Most attempts by the DBMS development organization to provide useful information to management seem to bog down in the quagmire of competing working level requirements. Most large DBMS development organizations possess three to five year backlogs. Perhaps Office Automation is the vehicle that brings to pass the Management Information System that really serves management. A good office automation system manned by a team of facilitators seeking opportunities to serve end-users could go a long way toward defining a DBMS that serves management. This paper will briefly discuss the problems of the DBMS organization, alternative approaches to solving some of the major problems, a debate about problems that may have no solution, and finally how office automation fits into the development of the Manager's Management Information System.

Geomechanical Response of Jointed Caprock During CO2 Geological Sequestration

NASA Astrophysics Data System (ADS)

Newell, P.; Martinez, M. J.; Bishop, J. E.

2014-12-01

Geological sequestration of CO2 refers to the injection of supercritical CO2 into deep reservoirs trapped beneath a low-permeability caprock formation. Maintaining caprock integrity during the injection process is the most important factor for a successful injection. In this work we evaluate the potential for jointed caprock during injection scenarios using coupled three-dimensional multiphase flow and geomechanics modeling. Evaluation of jointed/fractured caprock systems is of particular concern to CO2 sequestration because creation or reactivation of joints (mechanical damage) can lead to enhanced pathways for leakage. In this work, we use an equivalent continuum approach to account for the joints within the caprock. Joint's aperture and non-linear stiffness of the caprock will be updated dynamically based on the effective normal stress. Effective permeability field will be updated based on the joints' aperture creating an anisotropic permeability field throughout the caprock. This feature would add another coupling between the solid and fluid in addition to basic Terzaghi's effective stress concept. In this study, we evaluate the impact of the joint's orientation and geometry of caprock and reservoir layers on geomechanical response of the CO2 geological systems. This work is supported as part of the Center for Frontiers of Subsurface Energy Security, an Energy Frontier Research Center funded by the U.S. Department of Energy, Office of Science, Office of Basic Energy Sciences under Award Number DE-SC0001114. Sandia National Laboratories is a multi-program laboratory managed and operated by Sandia Corporation, a wholly owned subsidiary of Lockheed Martin Corporation, for the U.S. Department of Energy's National Nuclear Security Administration under contract DE-AC04-94AL85000.

Coordination Procedures between the Scientific Integrity Official and the Office of Inspector General regarding Scientific Misconduct Allegations

EPA Pesticide Factsheets

Coordination Procedures between the Scientific Integrity Official and the Office of Inspector General regarding Scientific Misconduct Allegations written March 30, 2015 by the Office of the Science Advisor

A user view of office automation or the integrated workstation

NASA Technical Reports Server (NTRS)

Schmerling, E. R.

1984-01-01

Central data bases are useful only if they are kept up to date and easily accessible in an interactive (query) mode rather than in monthly reports that may be out of date and must be searched by hand. The concepts of automatic data capture, data base management and query languages require good communications and readily available work stations to be useful. The minimal necessary work station is a personal computer which can be an important office tool if connected into other office machines and properly integrated into an office system. It has a great deal of flexibility and can often be tailored to suit the tastes, work habits and requirements of the user. Unlike dumb terminals, there is less tendency to saturate a central computer, since its free standing capabilities are available after down loading a selection of data. The PC also permits the sharing of many other facilities, like larger computing power, sophisticated graphics programs, laser printers and communications. It can provide rapid access to common data bases able to provide more up to date information than printed reports. Portable computers can access the same familiar office facilities from anywhere in the world where a telephone connection can be made.

Integration of Environmental Education and Environmental Law Enforcement for Police Officers

ERIC Educational Resources Information Center

Bovornkijprasert, Sravoot; Rawang, Wee

2016-01-01

The purpose of this research was to establish an integrated model of environmental education (EE) and environmental law enforcement (ELE) to improve the efficiency of functional competency for police officers in Bangkok Metropolitan Police Division 9 (MBP Div. 9). The research design was mixed methods of quantitative and qualitative approaches…

The joint contribution of neighborhood poverty and social integration to mortality risk in the United States.

PubMed

Marcus, Andrea Fleisch; Echeverria, Sandra E; Holland, Bart K; Abraido-Lanza, Ana F; Passannante, Marian R

2016-04-01

A well-established literature has shown that social integration strongly patterns health, including mortality risk. However, the extent to which living in high-poverty neighborhoods and having few social ties jointly pattern survival in the United States has not been examined. We analyzed data from the Third National Health and Nutrition Examination Survey (1988-1994) linked to mortality follow-up through 2006 and census-based neighborhood poverty. We fit Cox proportional hazards models to estimate associations between social integration and neighborhood poverty on all-cause mortality as independent predictors and in joint-effects models using the relative excess risk due to interaction to test for interaction on an additive scale. In the joint-effects model adjusting for age, gender, race/ ethnicity, and individual-level socioeconomic status, exposure to low social integration alone was associated with increased mortality risk (hazard ratio [HR]: 1.42, 95% confidence interval [CI]: 1.28-1.59) while living in an area of high poverty alone did not have a significant effect (HR: 1.10; 95% CI: 0.95-1.28) when compared with being jointly unexposed. Individuals simultaneously living in neighborhoods characterized by high poverty and having low levels of social integration had an increased risk of mortality (HR: 1.63; 95% CI: 1.35-1.96). However, relative excess risk due to interaction results were not statistically significant. Social integration remains an important determinant of mortality risk in the United States independent of neighborhood poverty. Copyright © 2016 Elsevier Inc. All rights reserved.

Joint principles: Integrating behavioral health care into the patient-centered medical home.

PubMed

2014-06-01

The Patient-centered Medical Home (PCMH) is an innovative, improved, and evolving approach to providing primary care that has gained broad acceptance in the United States. The Joint Principles of the PCMH, formulated and endorsed in February 2007, are sound and describe the ideal toward which we aspire. However, there is an element running implicitly through these joint principles that is difficult to achieve yet indispensable to the success of the entire PCMH concept. The incorporation of behavioral health care has not always been included as practices transform to accommodate to the PCMH ideals. This is an alarming development because the PCMH will be incomplete and ineffective without the full incorporation of this element, and retrofitting will be much more difficult than prospectively integrating into the original design of the PCMH. Therefore we offer a complementary set of joint principles that recognizes the centrality of behavioral health care as part of the PCMH. This document follows the order and language of the original joint principles while emphasizing what needs to be addressed to insure incorporation of the essential behavioral elements. It is intended to supplement and not replace the original Joint Principles document, which still stands.

Outcomes achieved by and police and clinician perspectives on a joint police officer and mental health clinician mobile response unit.

PubMed

Lee, Stuart J; Thomas, Phillipa; Doulis, Chantelle; Bowles, Doug; Henderson, Kathryn; Keppich-Arnold, Sandra; Perez, Eva; Stafrace, Simon

2015-12-01

Despite their limited mental health expertise, police are often first to respond to people experiencing a mental health crisis. Often the person in crisis is then transported to hospital for care, instead of receiving more immediate assessment and treatment in the community. The current study conducted an evaluation of an Australian joint police-mental health mobile response unit that aimed to improve the delivery of a community-based crisis response. Activity data were audited to demonstrate utilization and outcomes for referred people. Police officers and mental health clinicians in the catchment area were also surveyed to measure the unit's perceived impact. During the 6-month pilot, 296 contacts involving the unit occurred. Threatened suicide (33%), welfare concerns (22%) and psychotic episodes (18%) were the most common reasons for referral. The responses comprised direct admission to a psychiatric unit for 11% of contacts, transportation to a hospital emergency department for 32% of contacts, and community management for the remainder (57%). Police officers were highly supportive of the model and reported having observed benefits of the unit for consumers and police and improved collaboration between services. The joint police-mental health clinician unit enabled rapid delivery of a multi-skilled crisis response in the community. © 2015 Australian College of Mental Health Nurses Inc.

Attitudes of Male Unrestricted Line (URL) Officers Towards Integration of Women into Their Designators and Towards Women in Combat.

DTIC Science & Technology

1983-12-01

APR 1 11984 THESIS D ,. *. ATTITUDES OF MALE UNRESTRICTED LINE (URL) OFFICERS𔃿 TOWARDS INTEGRATION OF WOMEN INTO THEIR DESIGNATORS AND TOWARDS WOMEN... Male Unrestricted Line (URL) Master’s Thesis Officers Towards Integration of Women into their December, 1983 ,- Designators and Towards Women in...Integration of Women sq. AMYRACT (CtMue an rew side i moeep and Idenllifr blekn mb ) Using Rand Survey data, this thesis examines the attitudes of male Unre

Army Networks: Opportunities Exist to Better Utilize Results from Network Integration Evaluations

DTIC Science & Technology

2013-08-01

monitor operations; a touch screen-based mission command planning tool; and an antenna mast . The Army will field only one of these systems in capability...Office JTRS Joint Tactical Radio System NIE Network Integration Evaluation OSD Office of the Secretary of Defense SUE System under Evaluation...command systems . A robust transport layer capable of delivering voice, data, imagery, and video to the tactical edge (i.e., the forward battle lines

Joint Force Quarterly. Number 34, Spring 2003

DTIC Science & Technology

2003-07-01

Office of the Chairman LTG George W. Casey, Jr., USA ■ The Joint Staff MG Reginal G. Clemmons , USA ■ National War College A. Denis Clift ■ Joint...vol. 138, no. 91 (June 23, 1992), p. S 8602. 2 Maurice Matloff, editor, American Military History (Washington: Government Printing Office, 1969), p...was basically flawed and historically inac- curate. During the late 1930s General Maurice Gamelin exacerbated a faulty doctrine by shut- ting off all

National Guard Bureau Joint Staff

Science.gov Websites

, Publications Management, Administrative Services, Joint Staff Information Data Systems, Property Book -7 J-8 Personal Staff Inspector General Judge Advocate General Officer Management Public Affairs Executive Support Services Legislative Liaison Special Staff Directorate of Management Office of the Provost

25 CFR 11.903 - Presenting officer.

Code of Federal Regulations, 2010 CFR

2010-04-01

... OF INDIAN AFFAIRS, DEPARTMENT OF THE INTERIOR LAW AND ORDER COURTS OF INDIAN OFFENSES AND LAW AND ORDER CODE Children's Court § 11.903 Presenting officer. (a) The agency superintendent and the chief magistrate of the children's court shall jointly appoint a presenting officer to carry out the duties and...

32 CFR 311.7 - OSD/JS Privacy Office Processes.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 32 National Defense 2 2011-07-01 2011-07-01 false OSD/JS Privacy Office Processes. 311.7 Section...) PRIVACY PROGRAM OFFICE OF THE SECRETARY OF DEFENSE AND JOINT STAFF PRIVACY PROGRAM § 311.7 OSD/JS Privacy Office Processes. The OSD/JS Privacy Office shall: (a) Exercise oversight and administrative control of...

32 CFR 311.7 - OSD/JS Privacy Office Processes.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 32 National Defense 2 2013-07-01 2013-07-01 false OSD/JS Privacy Office Processes. 311.7 Section...) PRIVACY PROGRAM OFFICE OF THE SECRETARY OF DEFENSE AND JOINT STAFF PRIVACY PROGRAM § 311.7 OSD/JS Privacy Office Processes. The OSD/JS Privacy Office shall: (a) Exercise oversight and administrative control of...

32 CFR 311.7 - OSD/JS Privacy Office Processes.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 32 National Defense 2 2014-07-01 2014-07-01 false OSD/JS Privacy Office Processes. 311.7 Section...) PRIVACY PROGRAM OFFICE OF THE SECRETARY OF DEFENSE AND JOINT STAFF PRIVACY PROGRAM § 311.7 OSD/JS Privacy Office Processes. The OSD/JS Privacy Office shall: (a) Exercise oversight and administrative control of...

32 CFR 311.7 - OSD/JS Privacy Office Processes.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 32 National Defense 2 2012-07-01 2012-07-01 false OSD/JS Privacy Office Processes. 311.7 Section...) PRIVACY PROGRAM OFFICE OF THE SECRETARY OF DEFENSE AND JOINT STAFF PRIVACY PROGRAM § 311.7 OSD/JS Privacy Office Processes. The OSD/JS Privacy Office shall: (a) Exercise oversight and administrative control of...

32 CFR 311.7 - OSD/JS Privacy Office Processes.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 32 National Defense 2 2010-07-01 2010-07-01 false OSD/JS Privacy Office Processes. 311.7 Section...) PRIVACY PROGRAM OFFICE OF THE SECRETARY OF DEFENSE AND JOINT STAFF PRIVACY PROGRAM § 311.7 OSD/JS Privacy Office Processes. The OSD/JS Privacy Office shall: (a) Exercise oversight and administrative control of...

JOINT AND INDIVIDUAL VARIATION EXPLAINED (JIVE) FOR INTEGRATED ANALYSIS OF MULTIPLE DATA TYPES.

PubMed

Lock, Eric F; Hoadley, Katherine A; Marron, J S; Nobel, Andrew B

2013-03-01

Research in several fields now requires the analysis of datasets in which multiple high-dimensional types of data are available for a common set of objects. In particular, The Cancer Genome Atlas (TCGA) includes data from several diverse genomic technologies on the same cancerous tumor samples. In this paper we introduce Joint and Individual Variation Explained (JIVE), a general decomposition of variation for the integrated analysis of such datasets. The decomposition consists of three terms: a low-rank approximation capturing joint variation across data types, low-rank approximations for structured variation individual to each data type, and residual noise. JIVE quantifies the amount of joint variation between data types, reduces the dimensionality of the data, and provides new directions for the visual exploration of joint and individual structure. The proposed method represents an extension of Principal Component Analysis and has clear advantages over popular two-block methods such as Canonical Correlation Analysis and Partial Least Squares. A JIVE analysis of gene expression and miRNA data on Glioblastoma Multiforme tumor samples reveals gene-miRNA associations and provides better characterization of tumor types.

Joint Efforts Towards European HF Radar Integration

NASA Astrophysics Data System (ADS)

Rubio, A.; Mader, J.; Griffa, A.; Mantovani, C.; Corgnati, L.; Novellino, A.; Schulz-Stellenfleth, J.; Quentin, C.; Wyatt, L.; Ruiz, M. I.; Lorente, P.; Hartnett, M.; Gorringe, P.

2016-12-01

During the past two years, significant steps have been made in Europe for achieving the needed accessibility to High Frequency Radar (HFR) data for a pan-European use. Since 2015, EuroGOOS Ocean Observing Task Teams (TT), such as HFR TT, are operational networks of observing platforms. The main goal is on the harmonization of systems requirements, systems design, data quality, improvement and proof of the readiness and standardization of HFR data access and tools. Particular attention is being paid by HFR TT to converge from different projects and programs toward those common objectives. First, JERICO-NEXT (Joint European Research Infrastructure network for Coastal Observatory - Novel European eXpertise for coastal observaTories, H2020 2015 Programme) will contribute on describing the status of the European network, on seeking harmonization through exchange of best practices and standardization, on developing and giving access to quality control procedures and new products, and finally on demonstrating the use of such technology in the general scientific strategy focused by the Coastal Observatory. Then, EMODnet (European Marine Observation and Data Network) Physics started to assemble HF radar metadata and data products within Europe in a uniform way. This long term program is providing a combined array of services and functionalities to users for obtaining free of charge data, meta-data and data products on the physical conditions of European sea basins and oceans. Additionally, the Copernicus Marine Environment Monitoring Service (CMEMS) delivers from 2015 a core information service to any user related to 4 areas of benefits: Maritime Safety, Coastal and Marine Environment, Marine Resources, and Weather, Seasonal Forecasting and Climate activities. INCREASE (Innovation and Networking for the integration of Coastal Radars into EuropeAn marine SErvices - CMEMS Service Evolution 2016) will set the necessary developments towards the integration of existing European

Engineering studies on joint bar integrity, part I : field surveys and observed failure modes

DOT National Transportation Integrated Search

2014-04-02

This paper is the first of a two-part series describing a : research project, sponsored by the Federal Railroad : Administration (FRA), to study the structural integrity of joint : bars. In Part I of this series, observations from field surveys : con...

Dynamic Mobility Applications Policy Analysis: Policy and Institutional Issues for Integrated Dynamic Transit Operations (IDTO). [supporting datasets

DOT National Transportation Integrated Search

2015-01-27

The datasets in this zip file are in support of Intelligent Transportation Systems Joint Program Office (ITS JPO) report FHWA-JPO-14-134, "Dynamic Mobility Applications Policy Analysis: Policy and Institutional Issues for Integrated Dynamic Transit O...

14 CFR 399.37 - Joint fares.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 14 Aeronautics and Space 4 2010-01-01 2010-01-01 false Joint fares. 399.37 Section 399.37 Aeronautics and Space OFFICE OF THE SECRETARY, DEPARTMENT OF TRANSPORTATION (AVIATION PROCEEDINGS) POLICY STATEMENTS STATEMENTS OF GENERAL POLICY Policies Relating to Rates and Tariffs § 399.37 Joint fares. There...

Integrating Buprenorphine Treatment into Office-based Practice: a Qualitative Study

PubMed Central

Irwin, Kevin S.; Jones, Emlyn S.; Becker, William C.; Tetrault, Jeanette M.; Sullivan, Lynn E.; Hansen, Helena; O’Connor, Patrick G.; Schottenfeld, Richard S.; Fiellin, David A.

2008-01-01

BACKGROUND Despite the availability and demonstrated effectiveness of office-based buprenorphine maintenance treatment (BMT), the systematic examination of physicians’ attitudes towards this new medical practice has been largely neglected. OBJECTIVE To identify facilitators and barriers to the potential or actual implementation of BMT by office-based medical providers. DESIGN Qualitative study using individual and group semi-structured interviews. PARTICIPANTS Twenty-three practicing office-based physicians in New England. APPROACH Interviews were audiotaped, transcribed, and entered into a qualitative software program. The transcripts were thematically coded using the constant comparative method by a multidisciplinary team. RESULTS Eighty percent of the physicians were white; 55% were women. The mean number of years since graduating medical school was 14 (SD = 10). The primary areas of clinical specialization were internal medicine (50%), infectious disease (20%), and addiction medicine (15%). Physicians identified physician, patient, and logistical factors that would either facilitate or serve as a barrier to their integration of BMT into clinical practice. Physician facilitators included promoting continuity of patient care, positive perceptions of BMT, and viewing BMT as a positive alternative to methadone maintenance. Physician barriers included competing activities, lack of interest, and lack of expertise in addiction treatment. Physicians’ perceptions of patient-related barriers included concerns about confidentiality and cost, and low motivation for treatment. Perceived logistical barriers included lack of remuneration for BMT, limited ancillary support for physicians, not enough time, and a perceived low prevalence of opioid dependence in physicians’ practices. CONCLUSIONS Addressing physicians’ perceptions of facilitators and barriers to BMT is crucial to supporting the further expansion of BMT into primary care and office-based practices

Analysis of Commercially Available Firefighting Helmet and Boot Options for the Joint Firefighter Integrated Response Ensemble (JFIRE)

DTIC Science & Technology

2012-02-01

AFRL-RX-TY-TR-2012-0022 ANALYSIS OF COMMERCIALLY AVAILABLE HELMET AND BOOT OPTIONS FOR THE JOINT FIREFIGHTER INTEGRATED RESPONSE ENSEMBLE...Interim Technical Report 01-SEP-2010 -- 31-JAN-2011 Analysis of Commercially Available Firefighting Helmet and Boot Options for the Joint Firefighter...ensemble. A requirements correlation matrix was generated and sent to industry detailing objective and threshold measurements for both the helmet

41. BOW SPACES (YN OFFICES, AYN OFFICES & DECK SHOP, ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

41. BOW SPACES (YN OFFICES, AYN OFFICES & DECK SHOP, LAUNDRY & BOS'N STORES), WITH HATCH TO PAINT LOCKER AT LEFT. - U.S. Coast Guard Cutter WHITE HEATH, USGS Integrated Support Command Boston, 427 Commercial Street, Boston, Suffolk County, MA

Environmental Assessment for Air Force Research Laboratory Space Vehicles Integrated Experiments Division Office Space at Kirtland Air Force Base, Albuquerque, New Mexico

DTIC Science & Technology

2005-06-01

AIR FORCE RESEARCH LABORATORY SPACE VEHICLES INTEGRATED EXPERMENTS DIVISION OFFICE SPACE AT KIRTLAND AIR FORCE ... Kirtland Air Force Base (KAFB). The office building would house the Air Force Research Laboratory Space Vehicles Integrated Experiments Division...ADDRESS(ES) Air Force Research Laboratory ,Space Vehicles Directorate,3550 Aberdeen Ave. SE, Kirtland

Collaborators | Office of Cancer Genomics

Cancer.gov

The TARGET initiative is jointly managed within the National Cancer Institute (NCI) by the Office of Cancer Genomics (OCG)Opens in a New Tab and the Cancer Therapy Evaluation Program (CTEP)Opens in a New Tab.

12 CFR 612.2157 - Joint employees.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 12 Banks and Banking 6 2010-01-01 2010-01-01 false Joint employees. 612.2157 Section 612.2157... KNOWN OR SUSPECTED CRIMINAL VIOLATIONS Standards of Conduct § 612.2157 Joint employees. No officer of a Farm Credit Bank or an agricultural credit bank may serve as an employee of an association in its...

Campus/Industry Joint Ventures.

ERIC Educational Resources Information Center

McDonald, Eugene J.

1985-01-01

Opportunities for joint economic ventures of colleges and industry are discussed, and a variety of ventures undertaken by Duke University are outlined, including a health club, hotel, and office building. Tax and financing considerations are noted. (MSE)

Time And Temperature Dependent Micromechanical Properties Of Solder Joints For 3D-Package Integration

NASA Astrophysics Data System (ADS)

Roellig, Mike; Meier, Karsten; Metasch, Rene

2010-11-01

The recent development of 3D-integrated electronic packages is characterized by the need to increase the diversity of functions and to miniaturize. Currently many 3D-integration concepts are being developed and all of them demand new materials, new designs and new processing technologies. The combination of simulation and experimental investigation becomes increasingly accepted since simulations help to shorten the R&D cycle time and reduce costs. Numerical calculations like the Finite-Element-Method are strong tools to calculate stress conditions in electronic packages resulting from thermal strains due to the manufacturing process and environmental loads. It is essential for the application of numerical calculations that the material data is accurate and describes sufficiently the physical behaviour. The developed machine allows the measurement of time and temperature dependent micromechanical properties of solder joints. Solder joints, which are used to mechanically and electrically connect different packages, are physically measured as they leave the process. This allows accounting for process influences, which may change material properties. Additionally, joint sizes and metallurgical interactions between solder and under bump metallization can be respected by this particular measurement. The measurement allows the determination of material properties within a temperature range of 20° C-200° C. Further, the time dependent creep deformation can be measured within a strain-rate range of 10-31/s-10-81/s. Solder alloys based on Sn-Ag/Sn-Ag-Cu with additionally impurities and joint sizes down to O/ 200 μm were investigated. To finish the material characterization process the material model coefficient were extracted by FEM-Simulation to increase the accuracy of data.

Collaborators | Office of Cancer Genomics

Cancer.gov

The TARGET initiative has been jointly managed within the National Cancer Institute (NCI) by the Office of Cancer Genomics (OCG)Opens in a New Tab and the Cancer Therapy Evaluation Program (CTEP)Opens in a New Tab.

Joint Duty Prerequisite for Promotion to 07 (Brigadier General

DTIC Science & Technology

1989-03-13

NUMBER)(O LTC Julius E. Coats, Jr. 9. PERFORMING ORGANIZATIN NAME AND ADDRESS I0. PROGRAM ELEMENT. PROJECT. tASK U.S. Army War College AREA 4 WORK...new personnel policy; to wit, the Army leadership at all levels should view joint duty re- quirement for selection for flag officer with a positive...the Army leadership at all levels should view joint duty requirement for selection for flag officer with a positive attitude, not as a means for

Integrating Research and Education in NSF's Office of Polar Programs

NASA Astrophysics Data System (ADS)

Wharton, R. A.; Crain, R. D.

2003-12-01

The National Science Foundation invests in activities that integrate research and education, and that develop reward systems to support teaching, mentoring and outreach. Effective integration of research and education at all levels can infuse learning with the excitement of discovery. It can also ensure that the findings and methods of research are quickly and effectively communicated in a broader context and to a larger audience. This strategy is vital to the accomplishment of NSF's strategic goals of ensuring a world-class science and engineering workforce, new knowledge across the frontiers of science and engineering, and the tools to get the job done efficiently and effectively. The NSF's Office of Polar Programs sponsors educational projects at all levels of learning, making full use of the variety of disciplinary and interdisciplinary studies in the polar regions to attract and invigorate students. An array of efforts from the Arctic and Antarctic scientific communities link research activities with education. There has been an advance from the beneficial but isolated impacts of individual researcher visits to K-12 classrooms to large-scale developments, such as field research experiences for teachers and undergraduate students, online sharing of polar field experiences with rural classrooms, the institution of interdisciplinary graduate research programs through NSF initiatives, and opportunities for minority and underrepresented groups in polar sciences. The NSF's criterion for evaluating proposals based upon the broader impacts of the research activity has strengthened efforts to link research and education, resulting in partnerships and innovations that infuse research into education from kindergarten through postdoctoral studies and reaching out to the general public. In addition, the Office of Polar Programs partners with other directorates at NSF to broaden OPP's efforts and benefit from resources and experience in the Education and Human Resources

Joint Chiefs of Staff > Media > Publications

Science.gov Websites

Facebook on Flickr Joint Chiefs Army Chief of Staff Marine Corps Commandant Chief of Naval Operations Air Force Chief of Staff Chief of National Guard Bureau Biographies Directorates Directorates of Management - Upholding Our Oath SEAC's Publications Book | The Noncommissioned Officer and Petty Officer SEAC's Articles

Office Hours as You Like Them: Integrating Real-Time Chats into the Course Media Mix.

ERIC Educational Resources Information Center

McKeage, Kim

2001-01-01

Reports on one professor's use of integrated synchronous electronic office hours (i.e., a "chat room") with asynchronous course conferencing (i.e., email) in a class on introductory marketing. Describes its uses, limitations, benefits, potential problems, and results from a student survey. (EV)

Continued implementation and testing of a Neighborhood Office Center (NOC) and integration of the NOC with an administrative correspondence management information system

NASA Technical Reports Server (NTRS)

1978-01-01

The concept of decentralized (remote) neighborhood offices, linked together through a self-sustaining communications network for exchanging voice messages, video images, and digital data was quantitatively evaluated. Hardware and procedures for the integrated multifunctional system were developed. The configuration of the neighborhood office center (NOC) is explained, its production statistics given, and an experiment for NOC network integration via satellite is described. The hardware selected for the integration NOC/management information system is discussed, and the NASA teleconferencing network is evaluated.

Statement of the American Psychological Association in response to the "joint principles: integrating behavioral health care into the patient-centered medical home".

PubMed

Anderson, Norman B; Belar, Cynthia D; Cubic, Barbara A; Garrison, Ellen G; Johnson, Suzanne Bennett; Kaslow, Nadine J

2014-06-01

Comments on the article "Joint principles: Integrating behavioral health care into the patient-centered medical home" (see record 2014-24217-011), presented by the Working Party Group on Integrated Behavioral Healthcare. The American Psychological Association (APA) shares concerns about the lack of reference to behavioral health care in the original 2007 Joint Principles of the Patient-Centered Medical Home for which this new document is intended to supplement but not replace. The decision to support the supplemental Joint Principles was not an easy one for APA, as there is one area of significant concern. That concern is related to the use of the term "physician-directed medical practice"

Air-Sea Battle through Joint Training: Power Projection Sustainability

DTIC Science & Technology

2014-05-15

9 generate our decisive advantage.” 39 An example of cross-domain operations employed by the USN and USAF was the release of an AGM-154C Joint...and Herzegovina. While employing a USAF GBU -15 “electro-optically guided” bomb within close range of a USN AGM-84 SLAM-ER, “electronic... 39 U.S. Office of the Chairman, Joint Chiefs of Staff. Capstone Concept for Joint Operations: Joint Force 2020

24 CFR 570.411 - Joint Community Development Program.

Code of Federal Regulations, 2010 CFR

2010-04-01

... chief executive officer of each unit of general local government affected or a resolution of the... Availability described below in paragraph (h) of this section. (d) Role of participants in joint applications... will have to clearly delineate the role of each applicant in the joint application. Any funding...

Joint Task Force National Capital Region Medical: Integration of Education, Training, and Research

DTIC Science & Technology

2009-05-01

Defense established the Joint Task Force National Capital Region Medical (JTF CapMed ) on the National Naval Medical Center campus in Bethesda, Maryland in...transfor- mation of military health services in the National Capital Area including education, training, and research activities. JTF CAPMED ...BACKGROUND JTF CapMed was established to lead the integration of mili- tary health care in the National Capital Region. The Command is charged with overseeing

Integrated Semantics Service Platform for the Internet of Things: A Case Study of a Smart Office

PubMed Central

Ryu, Minwoo; Kim, Jaeho; Yun, Jaeseok

2015-01-01

The Internet of Things (IoT) allows machines and devices in the world to connect with each other and generate a huge amount of data, which has a great potential to provide useful knowledge across service domains. Combining the context of IoT with semantic technologies, we can build integrated semantic systems to support semantic interoperability. In this paper, we propose an integrated semantic service platform (ISSP) to support ontological models in various IoT-based service domains of a smart city. In particular, we address three main problems for providing integrated semantic services together with IoT systems: semantic discovery, dynamic semantic representation, and semantic data repository for IoT resources. To show the feasibility of the ISSP, we develop a prototype service for a smart office using the ISSP, which can provide a preset, personalized office environment by interpreting user text input via a smartphone. We also discuss a scenario to show how the ISSP-based method would help build a smart city, where services in each service domain can discover and exploit IoT resources that are wanted across domains. We expect that our method could eventually contribute to providing people in a smart city with more integrated, comprehensive services based on semantic interoperability. PMID:25608216

Integrated semantics service platform for the Internet of Things: a case study of a smart office.

PubMed

Ryu, Minwoo; Kim, Jaeho; Yun, Jaeseok

2015-01-19

The Internet of Things (IoT) allows machines and devices in the world to connect with each other and generate a huge amount of data, which has a great potential to provide useful knowledge across service domains. Combining the context of IoT with semantic technologies, we can build integrated semantic systems to support semantic interoperability. In this paper, we propose an integrated semantic service platform (ISSP) to support ontological models in various IoT-based service domains of a smart city. In particular, we address three main problems for providing integrated semantic services together with IoT systems: semantic discovery, dynamic semantic representation, and semantic data repository for IoT resources. To show the feasibility of the ISSP, we develop a prototype service for a smart office using the ISSP, which can provide a preset, personalized office environment by interpreting user text input via a smartphone. We also discuss a scenario to show how the ISSP-based method would help build a smart city, where services in each service domain can discover and exploit IoT resources that are wanted across domains. We expect that our method could eventually contribute to providing people in a smart city with more integrated, comprehensive services based on semantic interoperability.

76 FR 3157 - Joint Operations Center Relocation Project, Sacramento County, CA

Federal Register 2010, 2011, 2012, 2013, 2014

2011-01-19

... Water Resources (DWR), the lead State agency, will prepare a joint EIS/EIR for the proposed Joint... following departments: DWR's Division of Operations and Maintenance, Operations Control Office, State Water...

Comparison of four specific dynamic office chairs with a conventional office chair: impact upon muscle activation, physical activity and posture.

PubMed

Ellegast, Rolf P; Kraft, Kathrin; Groenesteijn, Liesbeth; Krause, Frank; Berger, Helmut; Vink, Peter

2012-03-01

Prolonged and static sitting postures provoke physical inactivity at VDU workplaces and are therefore discussed as risk factors for the musculoskeletal system. Manufacturers have designed specific dynamic office chairs featuring structural elements which promote dynamic sitting and therefore physical activity. The aim of the present study was to evaluate the effects of four specific dynamic chairs on erector spinae and trapezius EMG, postures/joint angles and physical activity intensity (PAI) compared to those of a conventional standard office chair. All chairs were fitted with sensors for measurement of the chair parameters (backrest inclination, forward and sideward seat pan inclination), and tested in the laboratory by 10 subjects performing 7 standardized office tasks and by another 12 subjects in the field during their normal office work. Muscle activation revealed no significant differences between the specific dynamic chairs and the reference chair. Analysis of postures/joint angles and PAI revealed only a few differences between the chairs, whereas the tasks performed strongly affected the measured muscle activation, postures and kinematics. The characteristic dynamic elements of each specific chair yielded significant differences in the measured chair parameters, but these characteristics did not appear to affect the sitting dynamics of the subjects performing their office tasks. Copyright © 2011 Elsevier Ltd and The Ergonomics Society. All rights reserved.

The impact of office chair features on lumbar lordosis, intervertebral joint and sacral tilt angles: a radiographic assessment.

PubMed

De Carvalho, Diana; Grondin, Diane; Callaghan, Jack

2017-10-01

The purpose of this study was to determine which office chair feature is better at improving spine posture in sitting. Participants (n = 28) were radiographed in standing, maximum flexion and seated in four chair conditions: control, lumbar support, seat pan tilt and backrest with scapular relief. Measures of lumbar lordosis, intervertebral joint angles and sacral tilt were compared between conditions and sex. Sitting consisted of approximately 70% of maximum range of spine flexion. No differences in lumbar flexion were found between the chair features or control. Significantly more anterior pelvic rotation was found with the lumbar support (p = 0.0028) and seat pan tilt (p < 0.0001). Males had significantly more anterior pelvic rotation and extended intervertebral joint angles through L1-L3 in all conditions (p < 0.0001). No one feature was statistically superior with respect to minimising spine flexion, however, seat pan tilt resulted in significantly improved pelvic posture. Practitioner Summary: Seat pan tilt, and to some extent lumbar supports, appear to improve seated postures. However, sitting, regardless of chair features used, still involves near end range flexion of the spine. This will increase stresses to the spine and could be a potential injury generator during prolonged seated exposures.

Designing your office for technology.

PubMed

Unthank, Michael

2004-10-01

To practice efficiently, dentists need to consider the successful integration of technologies, which can benefit their practice of dentistry. The physical environment of the office must be developed to accommodate not only the appropriate placement of computer hardware and high-tech dental devices, but their interconnectivity, as well. Dentists need to make appropriate decisions regarding the types of technology they choose to integrate into their offices, and they need to understand how the technology will be installed and integrated. An office designed to optimize the use of technology will produce ongoing benefits for dentists, their staff members and their patients throughout the lives of their practices. A dentist's practice must be planned to accommodate networks of systems hidden below floors, above ceilings and within walls, as well as to support and connect diverse technology items throughout the office.

An Integrated Approach to Exploration Launch Office Requirements Development

NASA Technical Reports Server (NTRS)

Holladay, Jon B.; Langford, Gary

2006-01-01

The proposed paper will focus on the Project Management and Systems Engineering approach utilized to develop a set of both integrated and cohesive requirements for the Exploration Launch Office, within the Constellation Program. A summary of the programmatic drivers which influenced the approach along with details of the resulting implementation will be discussed as well as metrics evaluating the efficiency and accuracy of the various requirements development activities. Requirements development activities will focus on the procedures utilized to ensure that technical content was valid and mature in preparation for the Crew Launch Vehicle and Constellation System s Requirements Reviews. This discussion will begin at initial requirements development during the Exploration Systems Architecture Study and progress through formal development of the program structure. Specific emphasis will be given to development and validation of the requirements. This discussion will focus on approaches to garner the appropriate requirement owners (or customers), project infrastructure utilized to emphasize proper integration, and finally the procedure to technically mature, verify and validate the requirements. Examples of requirements being implemented on the Launch Vehicle (systems, interfaces, test & verification) will be utilized to demonstrate the various processes and also provide a top level understanding of the launch vehicle(s) performance goals. Details may also be provided on the approaches for verification, which range from typical aerospace hardware development (qualification/acceptance) through flight certification (flight test, etc.). The primary intent of this paper is to provide a demonstrated procedure for the development of a mature, effective, integrated set of requirements on a complex system, which also has the added intricacies of both heritage and new hardware development integration. Ancillary focus of the paper will include discussion of Test and

OEI and OPA Issue a Joint Memorandum of Understanding (2002 Memo)

EPA Pesticide Factsheets

This MOU delineates certain interdependent functions, oversight responsibilities, and joint initiatives of the Office of Public Affairs (OPA) and the Office of Environmental Information (OEI) for the Agency's public Web site.

Integrated High-Speed Torque Control System for a Robotic Joint

NASA Technical Reports Server (NTRS)

Davis, Donald R. (Inventor); Radford, Nicolaus A. (Inventor); Permenter, Frank Noble (Inventor); Valvo, Michael C. (Inventor); Askew, R. Scott (Inventor)

2013-01-01

A control system for achieving high-speed torque for a joint of a robot includes a printed circuit board assembly (PCBA) having a collocated joint processor and high-speed communication bus. The PCBA may also include a power inverter module (PIM) and local sensor conditioning electronics (SCE) for processing sensor data from one or more motor position sensors. Torque control of a motor of the joint is provided via the PCBA as a high-speed torque loop. Each joint processor may be embedded within or collocated with the robotic joint being controlled. Collocation of the joint processor, PIM, and high-speed bus may increase noise immunity of the control system, and the localized processing of sensor data from the joint motor at the joint level may minimize bus cabling to and from each control node. The joint processor may include a field programmable gate array (FPGA).

Integration of post-abortion care: the role of township medical officers and midwives in Myanmar.

PubMed

Htay, Thein Thein; Sauvarin, Josephine; Khan, Saba

2003-05-01

Complications of unsafe abortion are a significant cause of maternal morbidity and mortality in Myanmar, and are recognised by the Ministry of Health as a priority. The Department of Health developed a strategy to address the problem of abortion complications by integrating post-abortion care and contraceptive services into the existing township health system. The quality of post-abortion care was assessed by the Department of Health in 2000, using a baseline survey of health providers and post-abortion women in Bago Division. The integration of post-abortion care was led by the Township Medical Officers, who provided monthly in-service training and supervision of health care workers in each township. Hospital-based doctors and nurses, clinic midwives, village midwives and other volunteer health providers, including traditional birth attendants, were all trained. The role of the local clinic midwife was extended to make follow-up home visits to the women with post-abortion complications and provide them with contraception when requested. Preliminary results show positive outcomes. However, donor-funded projects may have a destabilizing effect on township services by diverting attention and resources; donors need to work with government to support its priorities for health care. The future nationwide integration of post-abortion care services into township services should be planned in consultation with Township Medical Officers and midwives, the key providers of these services.

Complementary and Integrative Interventions for Chronic Neurologic Conditions Encountered in the Primary Care Office.

PubMed

Bega, Danny

2017-06-01

Chronic neurologic conditions are frequently managed in the primary care setting, and patients with these conditions are increasingly seeking nonconventional treatment options. This article provides a review and summary of the evidence for some of the most commonly studied and most frequently used complementary and integrative interventions for 3 conditions managed every day in primary care offices - diabetic neuropathy, migraine, and dementia. Copyright © 2017 Elsevier Inc. All rights reserved.

Feasibility of an Air Liaison Officer Career Field: Improving the Theater Air-Ground System

DTIC Science & Technology

2008-01-01

for Plans and Operations ALO air liaison officer AMLO air mobility liaison officer ANG Air National Guard ASOC air support operations center ASOG air...liaison officers ( AMLOs ) to liaison elements at Army corps, division, and other jointly validated headquarters to provide air mobility liaison. 1

Portland Area Office Bureau of Indian Affairs: 1980 Annual Report.

ERIC Educational Resources Information Center

Bureau of Indian Affairs (Dept. of Interior), Portland, OR.

In 1980 the Bureau of Indian Affairs (BIA) Portland Area Office served 43,500 Indians of 33 federally recognized tribes, bands, and groups living on or near 4 million acres of reservation land in Idaho, Washington, and Oregon. Highlights of the fiscal 1980 BIA/tribal partnership included the joint review of overall Office operations and…

Program and Management Support for the Office for Military Performance Assessment Technology

DTIC Science & Technology

1993-03-01

AD-A270 790 AD_ _ _ _ CONTRACT NO: DAMDI7-90-C-0061 TITLE: PROGRAM AND MANAGEMENT SUPPORT FOR THE OFFICE FOR MILITARY PERFORMANCE ASSESSMENT... the Office of Military Performance Assessment Technology (OMPAT). 1.1 Bag-kg n m. The OMPAT evolved from the Joint Working Group on Drug Dependent...facility was located, leased and occupied by Morgan Management Systems, Inc. staff and designated as the OMPAT Field Office. The office was located at 12075B

Integrated care

PubMed Central

Gröne, Oliver; Garcia-Barbero, Mila

2001-01-01

Abstract The WHO European Office for Integrated Health Care Services in Barcelona is an integral part of the World Health Organizations' Regional Office for Europe. The main purpose of the Barcelona office is within the integration of services to encourage and facilitate changes in health care services in order to promote health and improve management and patient satisfaction by working for quality, accessibility, cost-effectiveness and participation. This position paper outlines the need for Integrated Care from a European perspective, provides a theoretical framework for the meaning of Integrated Care and its strategies and summarizes the programmes of the office that will support countries in the WHO European Region to improve health services. PMID:16896400

Airborne and Maritime/Fixed Station Joint Tactical Radio System (AMF JTRS)

DTIC Science & Technology

2015-12-01

Selected Acquisition Report (SAR) RCS: DD-A&T(Q&A)823-421 Airborne & Maritime/Fixed Station Joint Tactical Radio System (AMF JTRS) As of FY 2017...Information Program Name Airborne & Maritime/Fixed Station Joint Tactical Radio System (AMF JTRS) DoD Component Army Responsible Office References SAR...UNCLASSIFIED 5 Mission and Description Airborne & Maritime/Fixed Station Joint Tactical Radio System (AMF JTRS) products are software programmable

An Impact of Zirconium Doping of Zn-Al Braze on the Aluminum-Stainless Steel Joints Integrity During Aging

NASA Astrophysics Data System (ADS)

Yang, Jinlong; Xue, Songbai; Sekulic, Dusan P.

2017-01-01

This work offers an analysis of the microstructure and the growth rate of an intermetallic compound within the aged AA 6061 aluminum alloy-304 stainless steel joint brazed with Zn-15Al and Zn-15Al-0.2Zr filler metals. The effect of zirconium addition on mechanical integrity of the brazed joint was studied. The experimental results confirm that the thickness of the Fe-Al intermetallic layer formed at the brazed seam/stainless steel interface increases with the increase of the aging time. Furthermore, it is established that the growth rate of the intermetallic layer for the Zn-15Al-0.2Zr brazed joint was lower than that for Zn-15Al. The results also indicate that the shear strength of both Zn-15Al and Zn-15Al-0.2Zr brazed joints decreases monotonously during aging. The value of the strength after aging lasting for 800 h for Zn-15Al and Zn-15Al-0.2Zr has decreased by 20 and 17%, respectively. The fracture of joints occurred at the interface between the brazed seam and the Fe4Al13 intermetallic layer. The morphology of the surfaces exhibits a cleavage fracture.

Unity is strength: staff college and the British officer corps.

PubMed

King, Anthony

2009-03-01

Utilizing Bourdieu's concept of the habitus, Keith Macdonald has recently examined the elite social origins of the British officer corps. His analysis is valid as far at it goes but it ignores the professional practices of British officers. This article examines Britain's Joint Services Command and Staff College to assess the unification of the three services around common forms of military practice. It argues that while the new staff college has been effective in disseminating new forms of professional expertise among British officers, various practices have been institutionalized which actively undermine the unity of the officer corps.

Assessment of the Office of Security Cooperation-Iraq Mission Capabilities

DTIC Science & Technology

2013-09-18

and report and other activities conducted by the Office of Special Plans & Operations to spo@dodig.mil Defense Hotline, The Pentagon ... Defense for Policy, U.S. Cenh·al Command, Joint Staff, and Defense Security Cooperation Agency responses when preparing the final repmt. Please...of Department of Defense support for executing security cooperation programs in Iraq and whether the Office of Security

14 CFR 296.4 - Joint loading.

Code of Federal Regulations, 2010 CFR

2010-01-01

... Aeronautics and Space OFFICE OF THE SECRETARY, DEPARTMENT OF TRANSPORTATION (AVIATION PROCEEDINGS) ECONOMIC REGULATIONS INDIRECT AIR TRANSPORTATION OF PROPERTY General § 296.4 Joint loading. Nothing in this part shall... transportation as one shipment, under an agreement between two or more indirect air carriers or foreign indirect...

Rescuing Joint Personnel Recovery: Using Air Force Capability to Address Joint Shortfalls

DTIC Science & Technology

2011-06-01

of an IP, the IP is not successfully reintegrated or the lessons learned are not incorporated into other operations. Adversaries will benefit from...Washington, D.C.: Office of Air Force History , United States Air Force, 1980, 117. 47 Durant , Michael J. In the Company of Heroes, Penguin Group... Lessons Learned, 22 September 2005, 3. 2 US Joint Task Force Katrina. The Federal Response to Hurricane Katrina Lessons Learned, February 2006, 54

75 FR 33613 - Notice of the Carbon Sequestration-Geothermal Energy-Science Joint Workshop

Federal Register 2010, 2011, 2012, 2013, 2014

2010-06-14

... Sequestration--Geothermal Energy--Science Joint Workshop AGENCY: Office of Energy Efficiency and Renewable Energy, DOE. ACTION: Notice of the Carbon Sequestration--Geothermal Energy--Science Joint Workshop... Carbon Storage and Geothermal Energy, June 15-16, 2010. Experts from industry, academia, national labs...

Arkansas' Office Procedures Curriculum Guide.

ERIC Educational Resources Information Center

Clayton, Dean

This curriculum guide provides teachers of office procedures classes with unit lesson plans and information about resource materials that can be examined, selected, and integrated into the instructional program. Contents are mainly established for the following two types of secondary-level programs: cooperative office education and intensive…

26 CFR 11.401(a)-11 - Qualified joint and survivor annuities.

Code of Federal Regulations, 2010 CFR

2010-04-01

... Corporation stock, (3) five equal annual cash payments, (4) a life annuity, or (5) a combination of options (1...— (1) Qualified joint and survivor annuity. The term “qualified joint and survivor annuity” means an... determination does not result in discrimination in favor of employees who are officers, shareholders, or highly...

26 CFR 11.401(a)-11 - Qualified joint and survivor annuities.

Code of Federal Regulations, 2012 CFR

2012-04-01

... Corporation stock, (3) five equal annual cash payments, (4) a life annuity, or (5) a combination of options (1...— (1) Qualified joint and survivor annuity. The term “qualified joint and survivor annuity” means an... determination does not result in discrimination in favor of employees who are officers, shareholders, or highly...

Model-based sensorimotor integration for multi-joint control: development of a virtual arm model.

PubMed

Song, D; Lan, N; Loeb, G E; Gordon, J

2008-06-01

An integrated, sensorimotor virtual arm (VA) model has been developed and validated for simulation studies of control of human arm movements. Realistic anatomical features of shoulder, elbow and forearm joints were captured with a graphic modeling environment, SIMM. The model included 15 musculotendon elements acting at the shoulder, elbow and forearm. Muscle actions on joints were evaluated by SIMM generated moment arms that were matched to experimentally measured profiles. The Virtual Muscle (VM) model contained appropriate admixture of slow and fast twitch fibers with realistic physiological properties for force production. A realistic spindle model was embedded in each VM with inputs of fascicle length, gamma static (gamma(stat)) and dynamic (gamma(dyn)) controls and outputs of primary (I(a)) and secondary (II) afferents. A piecewise linear model of Golgi Tendon Organ (GTO) represented the ensemble sampling (I(b)) of the total muscle force at the tendon. All model components were integrated into a Simulink block using a special software tool. The complete VA model was validated with open-loop simulation at discrete hand positions within the full range of alpha and gamma drives to extrafusal and intrafusal muscle fibers. The model behaviors were consistent with a wide variety of physiological phenomena. Spindle afferents were effectively modulated by fusimotor drives and hand positions of the arm. These simulations validated the VA model as a computational tool for studying arm movement control. The VA model is available to researchers at website http://pt.usc.edu/cel .

Joint Chiefs of Staff > Directorates > J6 | C4 & Cyber

Science.gov Websites

the Joint Staff Chief Information Officer (CIO), the J-6 provides business class Information on Facebook on Flickr Joint Chiefs► Army Chief of Staff Marine Corps Commandant Chief of Naval Operations Air Force Chief of Staff Chief of National Guard Bureau Biographies Directorates Directorates of

Neural alpha oscillations index the balance between self-other integration and segregation in real-time joint action.

PubMed

Novembre, Giacomo; Sammler, Daniela; Keller, Peter E

2016-08-01

Shared knowledge and interpersonal coordination are prerequisites for most forms of social behavior. Influential approaches to joint action have conceptualized these capacities in relation to the separate constructs of co-representation (knowledge) and self-other entrainment (coordination). Here we investigated how brain mechanisms involved in co-representation and entrainment interact to support joint action. To do so, we used a musical joint action paradigm to show that the neural mechanisms underlying co-representation and self-other entrainment are linked via a process - indexed by EEG alpha oscillations - regulating the balance between self-other integration and segregation in real time. Pairs of pianists performed short musical items while action familiarity and interpersonal (behavioral) synchronization accuracy were manipulated in a factorial design. Action familiarity referred to whether or not pianists had rehearsed the musical material performed by the other beforehand. Interpersonal synchronization was manipulated via congruent or incongruent tempo change instructions that biased performance timing towards the impending, new tempo. It was observed that, when pianists were familiar with each other's parts, millisecond variations in interpersonal synchronized behavior were associated with a modulation of alpha power over right centro-parietal scalp regions. Specifically, high behavioral entrainment was associated with self-other integration, as indexed by alpha suppression. Conversely, low behavioral entrainment encouraged reliance on internal knowledge and thus led to self-other segregation, indexed by alpha enhancement. These findings suggest that alpha oscillations index the processing of information about self and other depending on the compatibility of internal knowledge and external (environmental) events at finely resolved timescales. Copyright © 2016 Elsevier Ltd. All rights reserved.

Joint-venture proposals strengthen hospital-physician relationship.

PubMed

Rovinsky, M

2000-12-01

By proposing the joint-venture development of an ambulatory surgery center and medical office space with a group practice, one hospital succeeded in enhancing its relationship with the practice and paved the way for future collaboration. Although the hospital's proposal to jointly develop an ambulatory surgery center was not accepted, the hospital was able to dissuade the group practice from developing a competing ambulatory surgery facility while increasing the group's trust in and loyalty to the hospital. As a result, the hospital potentially will benefit from increased inpatient admissions.

Where Have all the Joint Planners Gone

DTIC Science & Technology

2009-04-01

Warfighting School that has zero say in the selection and outplacement of its graduates. The JAWS director, Colonel (Air Force) William T. “ Bigfoot ...15 January 2009. 99 Ibid. 100 Office interview between the author and Colonel William T. “ Bigfoot ” Eliason, Director, Joint Advanced Warfighting

Integrated propulsion technology demonstrator. Program plan

NASA Technical Reports Server (NTRS)

1994-01-01

NASA and Rockwell have embarked on a cooperative agreement to define, develop, fabricate, and operate an integrated propulsion technology demonstrator (IPTD) for the purpose of validating design, process, and technology improvements of launch vehicle propulsion systems. This program, a result of NRA8-11, Task Area 1 A, is jointly funded by both NASA and Rockwell and is sponsored by the Reusable Launch Vehicle office at NASA Marshall Space flight Center. This program plan provides to the joint NASA/Rockwell integrated propulsion technology demonstrator (IPTD) team a description of the activities within tasks / sub tasks and associated schedules required to successfully achieve program objectives. This document also defines the cost elements and manpower allocations for each sub task for purpose of program control. This plan is updated periodically by developing greater depth of direction for outyear tasks as the program matures. Updating is accomplished by adding revisions to existing pages or attaching page revisions to this plan. In either case, revisions will be identified by appropriate highlighting of the change, or specifying a revision page through the use of footnotes on the bottom right of each change page. Authorization for the change is provided by the principal investigators to maintain control of this program plan document and IPTD program activities.

Interrelating Office Skills Leads to Vocational Success

ERIC Educational Resources Information Center

Lynch, Claire

1974-01-01

The here-and-there approach to teaching and evaluating business and office skills will teach the skills, but training the totally competent office employee can best be accomplished by integrating and evaluating those skills as the business and office graduate will find them on the job--as a total performance. (Author/BP)

Office of Indian Affairs 1985 Annual Report.

ERIC Educational Resources Information Center

New Mexico State Commission on Indian Affairs, Santa Fe.

The major goals of the New Mexico Office of Indian Affairs (OIA) in 1985 were to enhance Indian education concerns, aid tribes in economic development, and effectuate a smooth working relationship between state, local, and tribal governments in the spirit of and through the use of the Joint Powers Act. Advancement is reflected in all these areas.…

A Novel Multiscale Design of Interfaces for Polymeric Composites and Bonded Joints using Additive Manufacturing

DTIC Science & Technology

2016-09-13

AFRL-AFOSR-VA-TR-2016-0317 A Novel Multiscale Design of Interfaces for Polymeric Composites and Bonded Joints using Additive Manufacturing Pavana...Composites and Bonded Joints using Additive Manufacturing AWARD NO.: FA9550-15-1-0216 AGENCY NAME: The Air Force Office of Scientific Research (AFOSR), Ar...20 3 Additive Manufacturing for Bonded Composite Joints 21 3.1 Introduction

Rewiring Warfighters for Joint Mindedness: Solutions for Joint Education in the 21st Century

DTIC Science & Technology

2010-06-01

begins " developing concepts to test the model or theory or plan for a forthcoming experience.൱ ELT provides a mechanism to reduce cognitive ...solving a lack of jointness requires a new way of thinking that focuses on developing cognitive symmetry among officers of different services... developing cognitive symmetry using P2C. Perception is the second P2C element. Creating cognitive symmetry through perception and not misperception

Training the Research Integrity Officers (RIO): The Federally Funded "RIO Boot Camps" Backward Design to Train for the Future

ERIC Educational Resources Information Center

Wright, David E.; Schneider, Paige P.

2010-01-01

Research institutions receiving U. S. Public Health Service (PHS) funding must assure the Office of Research Integrity (ORI/OPHS/DHHS) that policies and procedures are in place conforming to 42 CFR 93 to investigate allegations of Misconduct in Research, defined as fabrication or falsification of research data, or plagiarism. An institutional…

Coupled Multi-physics analysis of Caprock Integrity and Fault Reactivation during CO2 Sequestration*

NASA Astrophysics Data System (ADS)

Newell, P.; Martinez, M. J.; Bishop, J.

2012-12-01

Structural/stratigraphic trapping beneath a low-permeable caprock layer is the primary trapping mechanism for long-term subsurface sequestration of CO2. Pre-existing fracture networks, injection induced fractures, and faults are of concern for possible CO2 leakage both during and after injection. In this work we model the effects of both caprock jointing and a fault on the caprock sealing integrity during various injection scenarios. The modeling effort uses a three-dimensional finite-element based coupled multiphase flow and geomechanics simulator. The joints within the caprock are idealized as equally spaced and parallel. Both the mechanical and flow behavior of the joint network are treated within an effective continuum formulation. The mechanical behavior of the joint network is linear elastic in shear and nonlinear elastic in the normal direction. The flow behavior of the joint network is treated using the classical cubic-law relating flow rate and aperture. The flow behavior is then upscaled to obtain an effective permeability. The fault is modeled as a finite-thickness layer with multiple joint sets. The joint sets within the fault region are modeled following the same mechanical and flow formulation as the joints within the caprock. Various injection schedules as well as fault and caprock jointing configurations within a proto-typical sequestration site have been investigated. The resulting leakage rates through the caprock and fault are compared to those assuming intact material. The predicted leakage rates are a strong nonlinear function of the injection rate. *This material is based upon work supported as part of the Center for Frontiers of Subsurface Energy Security, an Energy Frontier Research Center funded by the U.S. Department of Energy, Office of Science, Office of Basic Energy Sciences under Award Number DE-SC0001114. Sandia is a multi-program laboratory operated by Sandia Corporation, a Lockheed Martin Company, for the United States Department of

77 FR 38088 - Development of the Joint Strategic Plan on Intellectual Property Enforcement; Request of the U.S...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-06-26

... OFFICE OF MANAGEMENT AND BUDGET Development of the Joint Strategic Plan on Intellectual Property Enforcement; Request of the U.S. Intellectual Property Enforcement Coordinator for Public Comments AGENCY: Office of the U.S. Intellectual Property Enforcement Coordinator, Executive Office of the President...

Barriers of inter-organisational integration in vocational rehabilitation.

PubMed

Wihlman, Ulla; Lundborg, Cecilia Stålsby; Axelsson, Runo; Holmström, Inger

2008-06-19

A project of vocational rehabilitation was studied in Sweden between 1999 and 2002. The project included four public organisations: the social insurance office, the local health services, the municipal social service and the office of the state employment service. The aim of this paper was to analyse perceived barriers in the development of inter-organisational integration. Theories of inter-professional and inter-organisational integration, and theories on organisational change. In total, 51 semi-structured interviews and 14 focus group discussions were performed with actors within the project between 1999 and 2002. A thematic approach was used for the analysis of the data. THREE DIFFERENT MAIN THEMES OF BARRIERS EMERGED FROM THE DATA: A Uncertainty, B Prioritising own organisation and C Lack of communication. The themes are interconnected in an intricate web and hence not mutually exclusive. The barriers found are all related partly to organisational change in general and partly to the specific development of organisational integration. Prioritising of own organisation led to flaws in communication, which in turn led to a high degree of uncertainty within the project. This can be seen as a circular relationship, since uncertainty might increase focus on own organisation and lack of communication. A way to overcome these barriers would be to take the needs of the clients as a point of departure in the development of joint services and to also involve them in the development of inter-organisational integration.

77 FR 5250 - Agency Information Collection Activities: Submission for OMB Review; Joint Comment Request

Federal Register 2010, 2011, 2012, 2013, 2014

2012-02-02

... DEPARTMENT OF THE TREASURY Office of The Comptroller of the Currency Federal Reserve System...; Joint Comment Request AGENCIES: Office of the Comptroller of the Currency (OCC), Treasury; Board of... the Comptroller of the Currency, Mailstop 2-3, Attention: 1557-0100, 250 E Street SW., Washington, DC...

Achieving 50% Energy Savings in Office Buildings, Advanced Energy Design Guides: Office Buildings (Brochure)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

2014-09-01

This fact sheet summarizes recommendations for designing new office buildings that result in 50% less energy use than conventional designs meeting minimum code requirements. The recommendations are drawn from the Advanced Energy Design Guide for Small to Medium Office Buildings, an ASHRAE publication that provides comprehensive recommendations for designing low-energy-use office buildings with gross floor areas up to 100,000 ft2 (see sidebar). Designed as a stand-alone document, this fact sheet provides key principles and a set of prescriptive design recommendations appropriate for smaller office buildings with insufficient budgets to fully implement best practices for integrated design and optimized performance. Themore » recommendations have undergone a thorough analysis and review process through ASHRAE, and have been deemed the best combination of measures to achieve 50% savings in the greatest number of office buildings.« less

Duke University: Licensing and Real Estate Joint Ventures.

ERIC Educational Resources Information Center

McDonald, Eugene J.

1984-01-01

Joint ventures undertaken by Duke University with industry are reported that illustrate the imaginative arrangements and economic and otherwise advantageous structures possible in co-ventures. They include patent and trademark licensing, travel agency commissions, a racquetball and health club, a hotel, and an office building. (MSE)

Sn-Ag-Cu Nanosolders: Solder Joints Integrity and Strength

NASA Astrophysics Data System (ADS)

Roshanghias, Ali; Khatibi, Golta; Yakymovych, Andriy; Bernardi, Johannes; Ipser, Herbert

2016-08-01

Although considerable research has been dedicated to the synthesis and characterization of lead-free nanoparticle solder alloys, only very little has been reported on the reliability of the respective joints. In fact, the merit of nanoparticle solders with depressed melting temperatures close to the Sn-Pb eutectic temperature has always been challenged when compared with conventional solder joints, especially in terms of inferior solderability due to the oxide shell commonly present on the nanoparticles, as well as due to compatibility problems with common fluxing agents. Correspondingly, in the current study, Sn-Ag-Cu (SAC) nanoparticle alloys were combined with a proper fluxing vehicle to produce prototype nanosolder pastes. The reliability of the solder joints was successively investigated by means of electron microscopy and mechanical tests. As a result, the optimized condition for employing nanoparticles as a competent nanopaste and a novel procedure for surface treatment of the SAC nanoparticles to diminish the oxide shell prior to soldering are being proposed.

Space Station alpha joint bearing

NASA Technical Reports Server (NTRS)

Everman, Michael R.; Jones, P. Alan; Spencer, Porter A.

1987-01-01

Perhaps the most critical structural system aboard the Space Station is the Solar Alpha Rotary Joint which helps align the power generation system with the sun. The joint must provide structural support and controlled rotation to the outboard transverse booms as well as power and data transfer across the joint. The Solar Alpha Rotary Joint is composed of two transition sections and an integral, large diameter bearing. Alpha joint bearing design presents a particularly interesting problem because of its large size and need for high reliability, stiffness, and on orbit maintability. The discrete roller bearing developed is a novel refinement to cam follower technology. It offers thermal compensation and ease of on-orbit maintenance that are not found in conventional rolling element bearings. How the bearing design evolved is summarized. Driving requirements are reviewed, alternative concepts assessed, and the selected design is described.

The Biological and Chemical Oceanography Data Management Office

NASA Astrophysics Data System (ADS)

Allison, M. D.; Chandler, C. L.; Groman, R. C.; Wiebe, P. H.; Glover, D. M.; Gegg, S. R.

2011-12-01

Oceanography and marine ecosystem research are inherently interdisciplinary fields of study that generate and require access to a wide variety of measurements. In late 2006 the Biological and Chemical Oceanography Sections of the National Science Foundation (NSF) Geosciences Directorate Division of Ocean Sciences (OCE) funded the Biological and Chemical Oceanography Data Management Office (BCO-DMO). In late 2010 additional funding was contributed to support management of research data from the NSF Office of Polar Programs Antarctic Organisms & Ecosystems Program. The BCO-DMO is recognized in the 2011 Division of Ocean Sciences Sample and Data Policy as one of several program specific data offices that support NSF OCE funded researchers. BCO-DMO staff members offer data management support throughout the project life cycle to investigators from large national programs and medium-sized collaborative research projects, as well as researchers from single investigator awards. The office manages and serves all types of oceanographic data and information generated during the research process and contributed by the originating investigators. BCO-DMO has built a data system that includes the legacy data from several large ocean research programs (e.g. United States Joint Global Ocean Flux Study and United States GLOBal Ocean ECosystems Dynamics), to which data have been contributed from recently granted NSF OCE and OPP awards. The BCO-DMO data system can accommodate many different types of data including: in situ and experimental biological, chemical, and physical measurements; modeling results and synthesis data products. The system enables reuse of oceanographic data for new research endeavors, supports synthesis and modeling activities, provides availability of "real data" for K-12 and college level use, and provides decision-support field data for policy-relevant investigations. We will present an overview of the data management system capabilities including: map

Integrated Data Modeling and Simulation on the Joint Polar Satellite System Program

NASA Technical Reports Server (NTRS)

Roberts, Christopher J.; Boyce, Leslye; Smith, Gary; Li, Angela; Barrett, Larry

2012-01-01

The Joint Polar Satellite System is a modern, large-scale, complex, multi-mission aerospace program, and presents a variety of design, testing and operational challenges due to: (1) System Scope: multi-mission coordination, role, responsibility and accountability challenges stemming from porous/ill-defined system and organizational boundaries (including foreign policy interactions) (2) Degree of Concurrency: design, implementation, integration, verification and operation occurring simultaneously, at multiple scales in the system hierarchy (3) Multi-Decadal Lifecycle: technical obsolesce, reliability and sustainment concerns, including those related to organizational and industrial base. Additionally, these systems tend to become embedded in the broader societal infrastructure, resulting in new system stakeholders with perhaps different preferences (4) Barriers to Effective Communications: process and cultural issues that emerge due to geographic dispersion and as one spans boundaries including gov./contractor, NASA/Other USG, and international relationships.

[Effects of exercise on joints.

PubMed

Moriyama, Hideki

Joints are composed of several different tissues(cartilage, capsule, meniscus, and ligament), and articular cartilage plays an important role in maintaining mechanical competence during exercise. Weight-bearing exercise has several benefit, including improved blood and synovial fluid circulation in a given joint. Consistent moderate activities facilitate cycles of anabolism and catabolism. Mechanical stresses are crucial for the maintenance of the morphologic and functional integrity of articular cartilage. Healthy cartilage is exposed by hydrostatic pressure and tensile strain, when cartilage degeneration develops, abnormal cartilage is exposed by shear stress. Moderate(physiological)exercise is characterized by a range of equilibrium between matrix anabolic and catabolic processes, or anabolism beyond catabolism. Joints are susceptible to insufficient or excessive activities, leading to joint degeneration. Lack of exercise is known to induce joint contracture seen clinically as a consequence of disuse changes, and excess mechanical stresses induce joint destruction such as osteoarthritis. Joint diseases resulting from insufficient or excessive activities are new and major challenging issues with our aging population. Thus, it is highly desirable to have an effective and efficient treatment to improve and protect against these joint diseases, and thereby to solve these clearly unanswered issues.

Solar Energy Technologies Office Fact Sheet

DOE Office of Scientific and Technical Information (OSTI.GOV)

Solar Energy Technologies Office

The U.S. Department of Energy Solar Energy Technologies Office (SETO) supports early-stage research and development to improve the affordability, reliability, and performance of solar technologies on the grid. The office invests in innovative research efforts that securely integrate more solar energy into the grid, enhance the use and storage of solar energy, and lower solar electricity costs.

2008 Joint Chemical Biological, Radiological and Nuclear (CBRN) Conference and Exhibition

DTIC Science & Technology

2008-06-26

Untitled Document 2008cbrn.html[5/16/ 2016 10:15:46 AM] 2008 Joint Chemical Biological, Radiological and Nuclear (CBRN) Conference & Exhibition... 2016 10:15:46 AM] Mr. Fred Crowson, Chief, Physical Science and Technology Division, Joint Science & Technology Office for Chemical and Biological... analysis Detect and measure alpha, beta, gamma, neutron, and x-ray emissions Levels A, B, and C capable Level A Level B 2-Jul-08 10 Extract Capabilities

Failure Time Analysis of Office System Use.

ERIC Educational Resources Information Center

Cooper, Michael D.

1991-01-01

Develops mathematical models to characterize the probability of continued use of an integrated office automation system and tests these models on longitudinal data collected from 210 individuals using the IBM Professional Office System (PROFS) at the University of California at Berkeley. Analyses using survival functions and proportional hazard…

44 CFR 150.5 - Joint Public Safety Awards Board.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 44 Emergency Management and Assistance 1 2010-10-01 2010-10-01 false Joint Public Safety Awards Board. 150.5 Section 150.5 Emergency Management and Assistance FEDERAL EMERGENCY MANAGEMENT AGENCY, DEPARTMENT OF HOMELAND SECURITY FIRE PREVENTION AND CONTROL PUBLIC SAFETY AWARDS TO PUBLIC SAFETY OFFICERS...

Breaking the Biological Barriers to Cellulosic Ethanol: A Joint Research Agenda

DOE Office of Scientific and Technical Information (OSTI.GOV)

Houghton, John; Weatherwax, Sharlene; Ferrell, John

2006-06-07

The Biomass to Biofuels Workshop, held December 7–9, 2005, was convened by the Department of Energy’s Office of Biological and Environmental Research in the Office of Science; and the Office of the Biomass Program in the Office of Energy Efficiency and Renewable Energy. The purpose was to define barriers and challenges to a rapid expansion of cellulosic-ethanol production and determine ways to speed solutions through concerted application of modern biology tools as part of a joint research agenda. Although the focus was ethanol, the science applies to additional fuels that include biodiesel and other bioproducts or coproducts having critical rolesmore » in any deployment scheme.« less

Joint Force Quarterly. Issue 36

DTIC Science & Technology

2004-12-01

Army War College RADM Richard D. Jaskot, USN ■ National War College VADM Timothy J. Keating , USN ■ The Joint Staff Col Walter L. Niblock, USMC ■ Marine...that: The motive in small wars is not material de- struction. It is usually a project dealing with social, economic , and political development of the...numbers of additional young of- ficers and noncommissioned officers. General Harold Johnson, Army Chief of Staff from June 1964 to June 1968, recalled

Integration of Visual and Joint Information to Enable Linear Reaching Motions

NASA Astrophysics Data System (ADS)

Eberle, Henry; Nasuto, Slawomir J.; Hayashi, Yoshikatsu

2017-01-01

A new dynamics-driven control law was developed for a robot arm, based on the feedback control law which uses the linear transformation directly from work space to joint space. This was validated using a simulation of a two-joint planar robot arm and an optimisation algorithm was used to find the optimum matrix to generate straight trajectories of the end-effector in the work space. We found that this linear matrix can be decomposed into the rotation matrix representing the orientation of the goal direction and the joint relation matrix (MJRM) representing the joint response to errors in the Cartesian work space. The decomposition of the linear matrix indicates the separation of path planning in terms of the direction of the reaching motion and the synergies of joint coordination. Once the MJRM is numerically obtained, the feedfoward planning of reaching direction allows us to provide asymptotically stable, linear trajectories in the entire work space through rotational transformation, completely avoiding the use of inverse kinematics. Our dynamics-driven control law suggests an interesting framework for interpreting human reaching motion control alternative to the dominant inverse method based explanations, avoiding expensive computation of the inverse kinematics and the point-to-point control along the desired trajectories.

Office Operative Hysteroscopy: An Update.

PubMed

Salazar, Christina Alicia; Isaacson, Keith B

2018-02-01

Hysteroscopy is considered the gold standard for the evaluation of intracavitary pathology in both premenopausal and postmenopausal patients associated with abnormal uterine bleeding, as well as for the evaluation of infertile patients with suspected cavity abnormalities. Office-based operative hysteroscopy allows patients to resume activities immediately and successfully integrates clinical practice into a "see and treat" modality, avoiding the added risks of anesthesia and the inconvenience of the operating room. For 2017, the Centers for Medicare and Medicaid Services has provided a substantial increase in reimbursement for a select number of office-based hysteroscopic procedures. This review provides an update on the indications, equipment, and procedures for office hysteroscopy, as well as the management of complications that may arise within an office-based practice. Copyright © 2018. Published by Elsevier Inc.

Energy Systems Integration Facility Office Space | Energy Systems

Science.gov Websites

unit has a design capacity of 24,000 cfm (with a minimum outside air of 6,500 cfm) and consists of a pre-filter, heating coil, fan section, cooling coil, and final filter. The office space also has

Self-referenced processing, neurodevelopment and joint attention in autism.

PubMed

Mundy, Peter; Gwaltney, Mary; Henderson, Heather

2010-09-01

This article describes a parallel and distributed processing model (PDPM) of joint attention, self-referenced processing and autism. According to this model, autism involves early impairments in the capacity for rapid, integrated processing of self-referenced (proprioceptive and interoceptive) and other-referenced (exteroceptive) information. Measures of joint attention have proven useful in research on autism because they are sensitive to the early development of the 'parallel' and integrated processing of self- and other-referenced stimuli. Moreover, joint attention behaviors are a consequence, but also an organizer of the functional development of a distal distributed cortical system involving anterior networks including the prefrontal and insula cortices, as well as posterior neural networks including the temporal and parietal cortices. Measures of joint attention provide early behavioral indicators of atypical development in this parallel and distributed processing system in autism. In addition it is proposed that an early, chronic disturbance in the capacity for integrating self- and other-referenced information may have cascading effects on the development of self awareness in autism. The assumptions, empirical support and future research implications of this model are discussed.

Integrating Out-Of-Office Blood Pressure in the Diagnosis and Management of Hypertension

PubMed Central

Cohen, Jordana B.; Cohen, Debbie L.

2016-01-01

Guidelines for the diagnosis and monitoring of hypertension were historically based on in-office blood pressure measurements. However, the United States Preventive Services Task Force recently expanded their recommendations on screening for hypertension to include out-of-office blood pressure measurements to confirm the diagnosis of hypertension. Out-of-office blood pressure monitoring, including ambulatory blood pressure monitoring and home blood pressure monitoring, are important tools in distinguishing between normotension, masked hypertension, white-coat hypertension, and sustained (including uncontrolled or drug-resistant) hypertension. Compared to in-office readings, out-of-office blood pressures are a greater predictor of renal and cardiac morbidity and mortality. There are multiple barriers to the implementation of out-of-office blood pressure monitoring which need to be overcome in order to promote more widespread use of these modalities. PMID:27677895

Integrating Out-of-Office Blood Pressure in the Diagnosis and Management of Hypertension.

PubMed

Cohen, Jordana B; Cohen, Debbie L

2016-11-01

Guidelines for the diagnosis and monitoring of hypertension were historically based on in-office blood pressure measurements. However, the US Preventive Services Task Force recently expanded their recommendations on screening for hypertension to include out-of-office blood pressure measurements to confirm the diagnosis of hypertension. Out-of-office blood pressure monitoring modalities, including ambulatory blood pressure monitoring and home blood pressure monitoring, are important tools in distinguishing between normotension, masked hypertension, white-coat hypertension, and sustained (including uncontrolled or drug-resistant) hypertension. Compared to in-office readings, out-of-office blood pressures are a greater predictor of renal and cardiac morbidity and mortality. There are multiple barriers to the implementation of out-of-office blood pressure monitoring which need to be overcome in order to promote more widespread use of these modalities.

Can the Army Provide Bulk Petroleum Support to Joint Force 2020?

DTIC Science & Technology

2013-03-01

Petroleum Officer (JPO) and one or more Sub Area Petroleum Officers ( SAPO ). The JPO coordinates petroleum support to all forces in a theater on behalf...position is the SAPO , established by the Combatant Commander or a Joint Force Commander (JFC) to fulfill bulk petroleum planning and execution in a...section of the theater for which the JPO is responsible.7 A key duty of the SAPO is to advise the JFC and his/her staff on petroleum logistics

77 FR 58415 - Large Scale Networking (LSN); Joint Engineering Team (JET)

Federal Register 2010, 2011, 2012, 2013, 2014

2012-09-20

... NATIONAL SCIENCE FOUNDATION Large Scale Networking (LSN); Joint Engineering Team (JET) AGENCY: The Networking and Information Technology Research and Development (NITRD) National Coordination Office (NCO..._Engineering_Team_ (JET). SUMMARY: The JET, established in 1997, provides for information sharing among Federal...

78 FR 70076 - Large Scale Networking (LSN)-Joint Engineering Team (JET)

Federal Register 2010, 2011, 2012, 2013, 2014

2013-11-22

... NATIONAL SCIENCE FOUNDATION Large Scale Networking (LSN)--Joint Engineering Team (JET) AGENCY: The Networking and Information Technology Research and Development (NITRD) National Coordination Office (NCO..._Engineering_Team_ (JET)#title. SUMMARY: The JET, established in 1997, provides for information sharing among...

Directorate of Management - Special Staff - Joint Staff - Leadership - The

Science.gov Websites

Space Management, Publications Management, Administrative Services, Joint Staff Information Data Systems J-4 J-5 J-6 J-7 J-8 Personal Staff Inspector General Judge Advocate General Officer Management Public Affairs Executive Support Services Legislative Liaison Special Staff Directorate of Management

Joint Intelligence Analysis Complex: DOD Needs to Fully Incorporate Best Practices into Future Cost Estimates

DTIC Science & Technology

2016-11-01

Report to Congressional Requesters November 2016 GAO-17-29 United States Government Accountability Office United States Government... Accountability Office Highlights of GAO-17-29, a report to congressional requesters November 2016 JOINT INTELLIGENCE ANALYSIS COMPLEX DOD...of scope, according to DOD and Air Force officials. However, without fully accounting for life- cycle costs, management may have difficulty

2013 Building Technologies Office Program Peer Review Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

none,

2013-11-01

The 2013 Building Technologies Office Program Peer Review Report summarizes the results of the 2013 Building Technologies Office (BTO) peer review, which was held in Washington, D.C., on April 2–4, 2013. The review was attended by over 300 participants and included presentations on 59 BTO-funded projects: 29 from BTO’s Emerging Technologies Program, 20 from the Commercial Buildings Integration Program, 6 from the Residential Buildings Integration Program, and 4 from the Building Energy Codes Program. This report summarizes the scores and comments provided by the independent reviewers for each project.

Climate Dynamics and Experimental Prediction (CDEP) and Regional Integrated Science Assessments (RISA) Programs at NOAA Office of Global Programs

NASA Astrophysics Data System (ADS)

Bamzai, A.

2003-04-01

This talk will highlight science and application activities of the CDEP and RISA programs at NOAA OGP. CDEP, through a set of Applied Research Centers (ARCs), supports NOAA's program of quantitative assessments and predictions of global climate variability and its regional implications on time scales of seasons to centuries. The RISA program consolidates results from ongoing disciplinary process research under an integrative framework. Examples of joint CDEP-RISA activities will be presented. Future directions and programmatic challenges will also be discussed.

Institutionalizing Blended Learning into Joint Training: A Case Study and Ten Recommendations

DTIC Science & Technology

2014-12-01

mail.mil pbockelman@mesh.dsci.com ABSTRACT In 2011, the Joint Staff J7 (Joint Training) directorate initiated the Continuum of eLearning project in...Orlando, FL. 14. ABSTRACT In 2011, the Joint Staff J7 (Joint Training) directorate initiated the Continuum of eLearning project in order to integrate...dispersed organizations still poses significant challenges. The Joint Staff J7, Deputy Director for Joint Training initiated the Continuum of eLearning

Joint Air-to-Ground Missile (JAGM)

DTIC Science & Technology

2015-12-01

Selected Acquisition Report ( SAR ) RCS: DD-A&T(Q&A)823-355 Joint Air-to-Ground Missile (JAGM) As of FY 2017 President’s Budget Defense Acquisition...Management Information Retrieval (DAMIR) March 4, 2016 09:30:05 UNCLASSIFIED JAGM December 2015 SAR March 4, 2016 09:30:05 UNCLASSIFIED 2 Table of...Office of the Secretary of Defense O&S - Operating and Support PAUC - Program Acquisition Unit Cost JAGM December 2015 SAR March 4, 2016 09:30:05

Joint Test and Evaluation Procedures Manual.

DTIC Science & Technology

1980-09-01

offices within 0oD such as ODDTE may allot funds to individual JTFs for purchasing goods and services. 1-12 Service support to JT&E is usually drawn...on underlying assumptions about the "real world," and that a good operational scenario may conflict with the assumptions for a specific statistical...Learned Since a good Data Management Plan is critical to the success of a joint test, some situations which have occurred in previous tests are listed

Time-temperature effect in adhesively bonded joints

NASA Technical Reports Server (NTRS)

Delale, F.; Erdogan, F.

1981-01-01

The viscoelastic analysis of an adhesively bonded lap joint was reconsidered. The adherends are approximated by essentially Reissner plates and the adhesive is linearly viscoelastic. The hereditary integrals are used to model the adhesive. A linear integral differential equations system for the shear and the tensile stress in the adhesive is applied. The equations have constant coefficients and are solved by using Laplace transforms. It is shown that if the temperature variation in time can be approximated by a piecewise constant function, then the method of Laplace transforms can be used to solve the problem. A numerical example is given for a single lap joint under various loading conditions.

77 FR 61572 - Membership of the Office of the Secretary Performance Review Board

Federal Register 2010, 2011, 2012, 2013, 2014

2012-10-10

... and Information Administration Leonard M. Bechtel, Chief Financial Officer and Director for... Office of the Secretary Ellen Herbst, Senior Advisor for Policy & Program Integration Office of the Chief Financial Officer and Assistant Secretary for Administration Frederick E. Stephens, Deputy Assistant...

Implementing High School JROTC [Junior Reserve Officers Training Corps] Career Academies.

ERIC Educational Resources Information Center

Hanser, Lawrence M.; Robyn, Abby E.

In 1992, the U.S. Department of Defense and U.S. Department of Education jointly developed the Junior Reserve Officers Training Corps (JROTC) Career Academy model, which provides a framework for implementation of an innovative vocational education program designed to keep dropout-prone students in school. The program, which combines military…

Albuquerque Operations Office, Albuquerque, New Mexico: Technology summary

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1994-08-01

This document has been prepared by the Department of Energy`s (DOE) Environmental Management (EM) Office of Technology Development (OTD) in order to highlight research, development, demonstration, testing, and evaluation (RDDT&E) activities funded through the Albuquerque Operations Office. Technologies and processes described have the potential to enhance DOE`s cleanup and waste management efforts, as well as improve US industry`s competitiveness in global environmental markets. The information has been assembled from recently produced OTD documents that highlight technology development activities within each of the OTD program elements. These integrated program summaries include: Volatile Organic Compounds in Non-Arid Soils, Volatile Organic Compounds inmore » Arid Soils, Mixed Waste Landfill Integrated Demonstration, Uranium in Soils Integrated Demonstration, Characterization, Monitoring, and Sensor Technology, In Situ Remediation, Buried Waste Integrated Demonstration, Underground Storage Tank, Efficient Separations and Processing, Mixed Waste Integrated Program, Rocky Flats Compliance Program, Pollution Prevention Program, Innovation Investment Area, and Robotics Technology.« less

The Challenges of Integrating NASA's Human, Budget, and Data Capital within the Constellation Program's Exploration Launch Projects Office

NASA Technical Reports Server (NTRS)

Kidd, Luanne; Morris, Kenneth B.; Self, Tim

2006-01-01

The U.S. Vision for Space Exploration directs NASA to retire the Space Shuttle in 2010 and replace it with safe, reliable, and cost-effective space transportation systems for crew and cargo travel to the Moon, Mars, and beyond. Such emerging space transportation initiatives face massive organizational challenges, including building and nurturing an experienced, dedicated team with the right skills for the required tasks; allocating and tracking the fiscal capital invested in achieving technical progress against an integrated master schedule; and turning generated data into usehl knowledge that equips the team to design and develop superior products for customers and stakeholders. This paper discusses how NASA's Exploration Launch Projects Office, which is responsible for delivering these new launch vehicles, integrates these resources to create an engineering business environment that promotes mission success.

Adaptive plasticity in mammalian masticatory joints

NASA Astrophysics Data System (ADS)

Ravosa, Matthew J.; Kunwar, Ravinder; Nicholson, Elisabeth K.; Klopp, Emily B.; Pinchoff, Jessie; Stock, Stuart R.; Stack, M. Sharon; Hamrick, Mark W.

2006-08-01

Genetically similar white rabbits raised on diets of different mechanical properties, as well as wild-type and myostatin-deficient mice raised on similar diets, were compared to assess the postweaning effects of elevated masticatory loads due to increased jaw-adductor muscle and bite forces on the proportions and properties of the mandibular symphysis and temporomandibular joint (TMJ). Microcomputed tomography (microCT) was used to quantify bone structure at a series of equidistant external and internal sites in coronal sections for a series of joint locations. Discriminant function analyses and non-parametric ANOVAs were used to characterize variation in biomineralization within and between loading cohorts. In both species, long-term excessive loading results in larger joint proportions, thicker articular and cortical bone, and increased biomineralization of hard tissues. Such adaptive plasticity appears designed to maintain the postnatal integrity of masticatory joint systems for a primary loading environment(s). This behavioral signal may be increasingly mitigated in older organisms by the interplay between adaptive and degradative joint tissue responses.

Transitioning Science and Technology into Acquisition Programs: Assessing One Government Laboratorys Processes

DTIC Science & Technology

2015-12-01

Accountability Office reports and recommendations, and ARDEC and the program managers established processes. The research indicated that the...Record. This examination was a direct review and comparison of Department of Defense policies, U.S. Government Accountability Office reports and...Government Accountability Office I&TT Innovation and Technology Transition IPT Integrated Product Team JCIDS Joint Capabilities Integration

Effect of Nd:YAG laser beam welding on weld morphology and mechanical properties of Ti-6Al-4V butt joints and T-joints

NASA Astrophysics Data System (ADS)

Kashaev, Nikolai; Ventzke, Volker; Fomichev, Vadim; Fomin, Fedor; Riekehr, Stefan

2016-11-01

A Nd:YAG single-sided laser beam welding process study for Ti-6Al-4V butt joints and T-joints was performed to investigate joining techniques with regard to the process-weld morphology relationship. An alloy compatible filler wire was used to avoid underfills and undercuts. The quality of the butt joints and T-joints was characterized in terms of weld morphology, microstructure and mechanical properties. Joints with regular shapes, without visible cracks, pores, and geometrical defects were achieved. Tensile tests revealed high joint integrity in terms of strength and ductility for both the butt joint and T-joint geometries. Both the butt joints and T-joints showed base material levels of strength. The mechanical performance of T-joints was also investigated using pull-out tests. The performance of the T-joints in such tests was sensitive to the shape and morphology of the welds. Fracture always occurred in the weld without any plastic deformation in the base material outside the weld.

Integrated Defense: Lessons Learned from Joint Base Balad

DTIC Science & Technology

2013-01-01

Fall 2004): 65–74. http://www.airpower.au.af.mil/airchronicles /apj/apj04/fal04/Fal04.pdf. Butterfield, SSgt Phillip . “Iraqi Army Returns to Joint...PhD Air University Press Team Chief Editor Jerry L. Gantt Copy Editor Sherry Terrell Cover Art and Book Design Daniel Armstrong Composition and Prepress Production Nedra Looney Print Preparation and Distribution Diane Clark

The Joint Lessons Learned System and Interoperability

DTIC Science & Technology

1989-06-02

Learned: 1988-1989 As mentioned in the introduction to this chaoter, the Organizacion of the JcinC Chiefs cf Staff .OJCS) ueren significant transformatioi...Organization and Functions Manual . Washington, D.C.: HQDA, Office of the Deputy Chief 0f Staff for Operations and Plans, June 1984. ’..S. Army. Concept...U.S. Department of Defense. Joint Universal Lessons Learned System (JULLS) User’s Manual . Orlando, Florida: University of Central Florida, Institute

A multi-feature integration method for fatigue crack detection and crack length estimation in riveted lap joints using Lamb waves

NASA Astrophysics Data System (ADS)

He, Jingjing; Guan, Xuefei; Peng, Tishun; Liu, Yongming; Saxena, Abhinav; Celaya, Jose; Goebel, Kai

2013-10-01

This paper presents an experimental study of damage detection and quantification in riveted lap joints. Embedded lead zirconate titanate piezoelectric (PZT) ceramic wafer-type sensors are employed to perform in situ non-destructive evaluation (NDE) during fatigue cyclical loading. PZT wafers are used to monitor the wave reflection from the boundaries of the fatigue crack at the edge of bolt joints. The group velocity of the guided wave is calculated to select a proper time window in which the received signal contains the damage information. It is found that the fatigue crack lengths are correlated with three main features of the signal, i.e., correlation coefficient, amplitude change, and phase change. It was also observed that a single feature cannot be used to quantify the damage among different specimens since a considerable variability was observed in the response from different specimens. A multi-feature integration method based on a second-order multivariate regression analysis is proposed for the prediction of fatigue crack lengths using sensor measurements. The model parameters are obtained using training datasets from five specimens. The effectiveness of the proposed methodology is demonstrated using several lap joint specimens from different manufactures and under different loading conditions.

Joint Force Quarterly. Number 1, Summer 1993

DTIC Science & Technology

1993-01-01

Contributors Joint Force Quarterly A PROFESSIONAL MILITARY JOURNAL Editor-in-Chief Alvin H. Bernstein Executive Editor Patrick M. Cronin Managing Editor Robert...understanding of the integrated employ- ment of land, sea, air, space, and special operations forces. The journal focuses on joint doctrine, coalition...other agency of the Federal Government. Por- tions of this journal are protected by copyright and may not be reproduced or extracted without the

Joint Fire Support

DTIC Science & Technology

2010-06-30

intelligence application package for theater battle management core system ( TBMCS ) functionality at wing and squadron levels. The automated four... TBMCS , Joint Surveillance and Target Attack Radar System (Ground Control Station), and Global Command and Control System, as well as with Allied FA...The TBMCS is a force level integrated air C2 system. TBMCS provides hardware, software, and communications interfaces to support the preparation

Multi-field coupled sensing network for health monitoring of composite bolted joint

NASA Astrophysics Data System (ADS)

Wang, Yishou; Qing, Xinlin; Dong, Liang; Banerjee, Sourav

2016-04-01

Advanced fiber reinforced composite materials are becoming the main structural materials of next generation of aircraft because of their high strength and stiffness to weight ratios, and excellent designability. As key components of large composite structures, joints play important roles to ensure the integrity of the composite structures. However, it is very difficult to analyze the strength and failure modes of composite joints due to their complex nonlinear coupling factors. Therefore, there is a need to monitor, diagnose, evaluate and predict the structure state of composite joints. This paper proposes a multi-field coupled sensing network for health monitoring of composite bolted joints. Major work of this paper includes: 1) The concept of multifunctional sensor layer integrated with eddy current sensors, Rogowski coil and arrayed piezoelectric sensors; 2) Development of the process for integrating the eddy current sensor foil, Rogowski coil and piezoelectric sensor array in multifunctional sensor layer; 3) A new concept of smart composite joint with multifunctional sensing capability. The challenges for building such a structural state sensing system and some solutions to address the challenges are also discussed in the study.

Synergistic Approach Integrating Joint Capabilities for USSOCOM Contingency Contracting: Construction Management Module

DTIC Science & Technology

2010-12-01

59 a. The Joint Uniform Lessons Learned System (JULLS) .........59 b. Acquisition Community Connection (ACC) ..........................59 c...Report ACC Acquisition Community Connection ADDIE Analyze, Design, Develop, Implement, Evaluate AFFARS Air Force Federal Acquisition Regulation...Operations J4 Logistics J5 Plans J6 Communications J8 Programming and Comptroller J&A Justification and Approval JARB Joint Acquisition

Surface-Water Quality-Assurance Plan for the Tallahassee Office, U.S. Geological Survey

USGS Publications Warehouse

Tomlinson, Stewart A.

2006-01-01

This Tallahassee Office Surface-Water Quality-Assurance Plan documents the standards, policies, and procedures used by the Tallahassee Office for activities related to the collection, processing, storage, analysis, and publication of surface-water data. This plan serves as a guide to all Tallahassee Office personnel involved in surface-water data activities, and changes as the needs and requirements of the Tallahassee Office, Florida Integrated Science Center, and Water Discipline change. Reg-ular updates to this Plan represent an integral part of the quality-assurance process. In the Tallahassee Office, direct oversight and responsibility by the employee(s) assigned to a surface-water station, combined with team approaches in all work efforts, assure high-quality data, analyses, reviews, and reports for cooperating agencies and the public.

Modeling Joint Climate and Bioenergy Policies: Challenges of integrating economic and environmental data. (Invited)

NASA Astrophysics Data System (ADS)

Hellwinckel, C. M.; West, T. O.; de La Torre Ugarte, D.; Perlack, R.

2010-12-01

In the coming decades agriculture will be asked to play a significant role in reducing carbon emissions and reducing our use of foreign oil. The Renewable Fuels Standard combined with possible climate legislation will alter the economic landscape effecting agricultural land use decisions. The joint implementation of these two policies could potentially work against one another. We have integrated biogeophysical data into the POLYSYS economic model to analyze the effects of climate change and bioenergy legislation upon regional land-use change, soil carbon, carbon emissions, biofuel production, and agricultural income. The purpose of the analysis was to use the integrated model to identify carbon and bioenergy policies that could act synergistically to meet Renewable Fuel Standard goals, reduce net emissions of carbon, and increase agricultural incomes. The heterogeneous nature of soils, crop yields, and management practices presented challenges to the modeling process. Regional variation in physical data can significantly affect economic land use decisions and patterns. For this reason, we disaggregated the economic component of the model to the county level, with sub-county soils and land-use data informing the county level decisions. Modeling carbon offset dynamics presented unique challenges, as the physical responses of local soils impact the economic incentives offered, and conversely, the resulting land-use changes impact characteristics of local soils. Additionally, using data from different resolution levels led to questions of appropriate scale of analysis. This presentation will describe the integrated model, present some significant results from our analysis, and discuss appropriate steps forward given what we learned.

Distribution and arrest of vertical through-going joints in a seismic-scale carbonate platform exposure (Sorrento peninsula, Italy): insights from integrating field survey and digital outcrop model

NASA Astrophysics Data System (ADS)

Corradetti, A.; Tavani, S.; Parente, M.; Iannace, A.; Vinci, F.; Pirmez, C.; Torrieri, S.; Giorgioni, M.; Pignalosa, A.; Mazzoli, S.

2018-03-01

Through-going joints cutting across beds are often invoked to match large-scale permeability patterns in tight carbonate reservoirs. However, despite the importance of these structures for fluid flow, only few field studies focused on the understanding and estimation of through-going joint dimensional parameters, including spacing and vertical extent in relation to stratigraphy. Recent improvements in the construction of digital models of outcrops can greatly help to overcome many logistic issues, favouring the evaluation of relationships between jointing and stratigraphy at the reservoir scale. In this study, we present the results obtained from integrating field measurements with a digital outcrop model of a carbonate platform reservoir analogue in the Sorrento peninsula (Italy). The outcrop consists of a nearly vertical cliff exposing a monocline of alternating gently-dipping shallow-water limestones and dolostones, crossed by several vertical joints of different size. This study allowed us to define how major through-going joints pass across thick beds (bed thickness > 30 cm), while they arrest against packages made of thinly stratified layers. In essence, through-going joints arrest on "weak" levels, consisting of thinly bedded layers interposed between packages made of thick beds, in the same manner as bed-confined joints arrest on less competent interlayers.

Gen. Paul J. Selva > Joint Chiefs of Staff > Article View

Science.gov Websites

aircraft systems and executive officer, Deputy Chief of Staff, Plans and Resources, Headquarters Strategic Facebook on Flickr Joint Chiefs Army Chief of Staff Marine Corps Commandant Chief of Naval Operations Air Force Chief of Staff Chief of National Guard Bureau Biographies Directorates Directorates of Management

Triple Track: A New Paradigm for Developing Air Force Officers

DTIC Science & Technology

2017-03-06

multiple career fields, including aircraft maintenance, command and control, engineering , modeling analysis, joint targeting, program management...the opportunity for an engineering job because he was too critical in his career field. The member ultimately left the service.41 Critical manning...manpower, and officer training. Over the course of her career , she was responsible for generating over 956 C-130 aircraft sorties, led interagency efforts

Criteria of Police Officer Performance.

ERIC Educational Resources Information Center

Baehr, Melany E.

The indifferent success in achieving the goal of reliable and valid police officer work performance measures has been attributed to the complexity of the job. This study explored reasons for unsatisfactory police performance evaluation, reviewing and integrating previous studies and new recently collected but not yet published data. Performance…

The integrated scheduling system: A case study in project management

NASA Technical Reports Server (NTRS)

Bishop, Peter C.; Learned, David B.; Yoes, Cissy A.

1989-01-01

A prototype project management system was developed for the Level III Project Office for the Space Station Freedom. The main goal was to establish a framework for the Space Station Project Office whereby Project and Office Managers can jointly establish and review scheduled milestones and activities. The objective was to assist office managers in communicating their objectives, milestones, schedules, and other project information more effectively and efficiently. Consideration of sophisticated project management systems was included, but each of the systems had limitations in meeting the stated objectives.

Organizational Considerations for Implementing Systems Engineering and Integration in the Ares Projects Office

NASA Technical Reports Server (NTRS)

Thomas, LeAnn; Doreswamy, Rajiv N.

2008-01-01

Systems Engineering and Integration (SE&I) is a critical discipline in developing new space systems. In 2005, NASA performed an internal study of 24 agency and Department of Defense (DoD) programs to evaluate methods of integrating SE&I practices and determine their effectiveness. The goal of the study was to determine the best SE&I implementation strategy for the Ares Projects Office. The study identified six SE&I organizational structures: 1. Lead systems integrator (LSI) with SE&I responsibility and government technical insight. 2a. Integration contractor with government SE&I responsibility (government insight). 2b. Integration contractor with government SE&I responsibility (government oversight). 3a. Prime contractor with SE&I responsibility (government insight). 3b. Prime contractor with SE&I responsibility (government oversight). 3c. Prime contractor with SE&I responsibility (government/industry partnership). 4a.Prime contractor with government SE&I responsibility (government insight). 4b. Prime contractor with government SE&I responsibility (government oversight). 4d.Prime contractors with total system performance responsibility (TSPR). 5. Prime contractor with government SE&I responsibility and integration products through a Federally Funded Research and Development Center (FFRDC). 6. Government/FFRDC in-house development with SE&I responsibility and function. The organizational structure used most often was number 4, using a prime contractor with government SE&I responsibility and government technical insight. However, data analyses did not establish a positive relationship between program development costs and specific SE&I organizational types, nor did it positively determine the relationship between successful programs or projects and their SE&I structure. The SE&I study reached the following conclusions: (1) Large, long-duration, technically complex programs or projects reach their technical goals, but rarely meet schedule or cost goals. NASA's recent

Co-Leadership - A Management Solution for Integrated Health and Social Care.

PubMed

Klinga, Charlotte; Hansson, Johan; Hasson, Henna; Sachs, Magna Andreen

2016-05-23

Co-leadership has been identified as one approach to meet the managerial challenges of integrated services, but research on the topic is limited. In the present study, co-leadership, practised by pairs of managers - each manager representing one of the two principal organizations in integrated health and social care services - was explored. To investigate co-leadership in integrated health and social care, identify essential preconditions in fulfilling the management assignment, its operationalization and impact on provision of sustainable integration of health and social care. Interviews with eight managers exercising co-leadership were analysed using directed content analysis. Respondent validation was conducted through additional interviews with the same managers. Key contextual preconditions were an organization-wide model supporting co-leadership and co-location of services. Perception of the management role as a collective activity, continuous communication and lack of prestige were essential personal and interpersonal preconditions. In daily practice, office sharing, being able to give and take and support each other contributed to provision of sustainable integration of health and social care. Co-leadership promoted robust management by providing broader competence, continuous learning and joint responsibility for services. Integrated health and social care services should consider employing co-leadership as a managerial solution to achieve sustainability.

Joint Technical Architecture for Robotic Systems (JTARS)-Final Report

NASA Technical Reports Server (NTRS)

Bradley, Arthur T.; Holloway, Sidney E., III

2006-01-01

This document represents the final report for the Joint Technical Architecture for Robotic Systems (JTARS) project, funded by the Office of Exploration as part of the Intramural Call for Proposals of 2005. The project was prematurely terminated, without review, as part of an agency-wide realignment towards the development of a Crew Exploration Vehicle (CEV) and meeting the near-term goals of lunar exploration.

The Office of Environmental Management technical reports: a bibliography

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

1997-07-01

The Office of Environmental Management`s (EM) technical reports bibliography is an annual publication that contains information on scientific and technical reports sponsored by the Office of Environmental Management added to the Energy Science and Technology Database from July 1, 1995 through Sept. 30, 1996. This information is divided into the following categories: Focus Areas and Crosscutting Programs. Support Programs, Technology Integration and International Technology Exchange are now included in the General category. EM`s Office of Science and Technology sponsors this bibliography.

A Systems Biology Approach to Synovial Joint Lubrication in Health, Injury, and Disease

PubMed Central

Hui, Alexander Y.; McCarty, William J.; Masuda, Koichi; Firestein, Gary S.; Sah, Robert L.

2013-01-01

The synovial joint contains synovial fluid (SF) within a cavity bounded by articular cartilage and synovium. SF is a viscous fluid that has lubrication, metabolic, and regulatory functions within synovial joints. SF contains lubricant molecules, including proteoglycan-4 and hyaluronan. SF is an ultrafiltrate of plasma with secreted contributions from cell populations lining and within the synovial joint space, including chondrocytes and synoviocytes. Maintenance of normal SF lubricant composition and function are important for joint homeostasis. In osteoarthritis, rheumatoid arthritis, and joint injury, changes in lubricant composition and function accompany alterations in the cytokine and growth factor environment and increased fluid and molecular transport through joint tissues. Thus, understanding the synovial joint lubrication system requires a multi-faceted study of the various parts of the synovial joint and their interactions. Systems biology approaches at multiple scales are being used to describe the molecular, cellular, and tissue components and their interactions that comprise the functioning synovial joint. Analyses of the transcriptome and proteome of SF, cartilage, and synovium suggest that particular molecules and pathways play important roles in joint homeostasis and disease. Such information may be integrated with physicochemical tissue descriptions to construct integrative models of the synovial joint that ultimately may explain maintenance of health, recovery from injury, or development and progression of arthritis. PMID:21826801

NOAA Civil Rights Office - EEO Office

Science.gov Websites

Oceanic and Atmospheric Administration Office of the Chief Administration Officer Civil Rights Office (CRO Diversity and Inclusion Management Advisory Council (DIMAC) Diversity and Inclusion Toolkit The NOAA Civil Rights Office Welcome to the NOAA Civil Rights Office The NOAA Civil Rights Office provides overall

Simulation Based Acquisition for NASA's Office of Exploration Systems

NASA Technical Reports Server (NTRS)

Hale, Joe

2004-01-01

In January 2004, President George W. Bush unveiled his vision for NASA to advance U.S. scientific, security, and economic interests through a robust space exploration program. This vision includes the goal to extend human presence across the solar system, starting with a human return to the Moon no later than 2020, in preparation for human exploration of Mars and other destinations. In response to this vision, NASA has created the Office of Exploration Systems (OExS) to develop the innovative technologies, knowledge, and infrastructures to explore and support decisions about human exploration destinations, including the development of a new Crew Exploration Vehicle (CEV). Within the OExS organization, NASA is implementing Simulation Based Acquisition (SBA), a robust Modeling & Simulation (M&S) environment integrated across all acquisition phases and programs/teams, to make the realization of the President s vision more certain. Executed properly, SBA will foster better informed, timelier, and more defensible decisions throughout the acquisition life cycle. By doing so, SBA will improve the quality of NASA systems and speed their development, at less cost and risk than would otherwise be the case. SBA is a comprehensive, Enterprise-wide endeavor that necessitates an evolved culture, a revised spiral acquisition process, and an infrastructure of advanced Information Technology (IT) capabilities. SBA encompasses all project phases (from requirements analysis and concept formulation through design, manufacture, training, and operations), professional disciplines, and activities that can benefit from employing SBA capabilities. SBA capabilities include: developing and assessing system concepts and designs; planning manufacturing, assembly, transport, and launch; training crews, maintainers, launch personnel, and controllers; planning and monitoring missions; responding to emergencies by evaluating effects and exploring solutions; and communicating across the OEx

Analysis and Recommendations on the Company-Grade Officer Shortfall in the Reserve Components of the U.S. Army

DTIC Science & Technology

2011-01-01

available from www.rand.org as a public service of the RAND Corporation. CHILDREN AND FAMILIES EDUCATION AND THE ARTS ENERGY AND ENVIRONMENT HEALTH AND...conducted within the RAND National Defense Research Institute, a federally funded research and development center sponsored by OSD, the Joint Staff, the... develop - ment center sponsored by the Office of the Secretary of Defense, the Joint Staff, the Unified Combatant Commands, the Navy, the Marine Corps

Adaptive independent joint control of manipulators - Theory and experiment

NASA Technical Reports Server (NTRS)

Seraji, H.

1988-01-01

The author presents a simple decentralized adaptive control scheme for multijoint robot manipulators based on the independent joint control concept. The proposed control scheme for each joint consists of a PID (proportional integral and differential) feedback controller and a position-velocity-acceleration feedforward controller, both with adjustable gains. The static and dynamic couplings that exist between the joint motions are compensated by the adaptive independent joint controllers while ensuring trajectory tracking. The proposed scheme is implemented on a MicroVAX II computer for motion control of the first three joints of a PUMA 560 arm. Experimental results are presented to demonstrate that trajectory tracking is achieved despite strongly coupled, highly nonlinear joint dynamics. The results confirm that the proposed decentralized adaptive control of manipulators is feasible, in spite of strong interactions between joint motions. The control scheme presented is computationally very fast and is amenable to parallel processing implementation within a distributed computing architecture, where each joint is controlled independently by a simple algorithm on a dedicated microprocessor.

Group benefits in joint perceptual tasks-a review.

PubMed

Wahn, Basil; Kingstone, Alan; König, Peter

2018-05-12

In daily life, humans often perform perceptual tasks together to reach a shared goal. In these situations, individuals may collaborate (e.g., by distributing task demands) to perform the task better than when the task is performed alone (i.e., attain a group benefit). In this review, we identify the factors influencing if, and to what extent, a group benefit is attained and provide a framework of measures to assess group benefits in perceptual tasks. In particular, we integrate findings from two frequently investigated joint perceptual tasks: visuospatial tasks and decision-making tasks. For both task types, we find that an exchange of information between coactors is critical to improve joint performance. Yet, the type of exchanged information and how coactors collaborate differs between tasks. In visuospatial tasks, coactors exchange information about the performed actions to distribute task demands. In perceptual decision-making tasks, coactors exchange their confidence on their individual perceptual judgments to negotiate a joint decision. We argue that these differences can be explained by the task structure: coactors distribute task demands if a joint task allows for a spatial division and stimuli can be accurately processed by one individual. Otherwise, they perform the task individually and then integrate their individual judgments. © 2018 New York Academy of Sciences.

[Minimally invasive approaches to hip and knee joints for total joint replacement].

PubMed

Rittmeister, M; König, D P; Eysel, P; Kerschbaumer, F

2004-11-01

The manuscript features the different minimally invasive approaches to the hip for joint replacement. These include medial, anterior, anterolateral, and posterior approaches. The concept of minimally invasive hip arthroplasty makes sense if it is an integral part of a larger concept to lower postoperative morbidity. Besides minimal soft tissue trauma, this concept involves preoperative patient education, preemptive analgesia, and postoperative physiotherapy. It is our belief that minimal incision techniques for the hip are not suited for all patients and all surgeons. The different minimally invasive approaches to the knee joint for implantation of a knee arthroplasty are described and discussed. There have been no studies published yet that fulfill EBM criteria. The data so far show that minimally invasive approaches and implantation techniques for total knee replacements lead to quicker rehabilitation of patients.

HELIOS Third Joint Working Group Meeting

NASA Technical Reports Server (NTRS)

Ousley, Gilbert; Kutzer, Ants

1970-01-01

During the past six months since the Second Helios Joint Working Group Meeting held 27-30 April 1970 at Goddard Space Flight Center, the TDS Sub-Group supported the Helios Project Office and the other Sub-Groups in the timely disposition of action items and the dissemination of information pertinent to the development of interface documentation. Of particular importance during this time period was the Project's decision to incorporate a single-channel telemetry system design aboard the spacecraft. The TDS Sub-Group participated actively in the process that led to this decision. Still under active study with TDS participation is the pending Project Office decision regarding the incorporation of a ranging capability within the telecommunications design. The TDS Sub-Group assisted the Mission Analysis and Operations Sub-Group in establishment of a study effort concerning the Near-Earth Sequence of Events from launch to launch plus 8 hours. This study, which will provide valuable data for the spacecraft telecommunications design, will include participation by the Experiment, Launch Vehicle, Spacecraft, as well as the TDS and MA&O Sub-Groups. Also during the past 6-month period, the TDS, in conjunction with the Spacecraft Sub-Group, initiated activity to develop the Helios Spacecraft/TDS Compatibility Test Plans and Procedures. Activity concerning the foregoing interface discussions has been and will continue to be based upon the "TDS Estimated Capabilities Document for the Helios Missions" (613-1), and the "DSN/Flight Project Interface Design Handbook" (810-5). These will continue to be considered TDS controlling documents until specific Helios Project/TDS interface documentation is generated and signed off by the respective parties. In addition to the above, the DSN continued the Helios Trainee Program with seven GfW/DFVLR trainees in residence at JPL. Two trainees will complete their year's residency concurrent with the Third Helios Joint Working Group Meeting, while

Gen. Joseph F. Dunford, Jr. > Joint Chiefs of Staff > Article View

Science.gov Websites

Facebook on Flickr Joint Chiefs Army Chief of Staff Marine Corps Commandant Chief of Naval Operations Air Force Chief of Staff Chief of National Guard Bureau Biographies Directorates Directorates of Management Chiefs of Staff, the nation's highest-ranking military officer, and the principal military advisor to the

F-35 Joint Strike Fighter Aircraft (F-35)

DTIC Science & Technology

2015-12-01

Selected Acquisition Report ( SAR ) RCS: DD-A&T(Q&A)823-198 F-35 Joint Strike Fighter Aircraft (F-35) As of FY 2017 President’s Budget Defense...Acquisition Management Information Retrieval (DAMIR) March 21, 2016 08:47:09 UNCLASSIFIED F-35 December 2015 SAR March 21, 2016 08:47:09 UNCLASSIFIED 2...Document OSD - Office of the Secretary of Defense O&S - Operating and Support PAUC - Program Acquisition Unit Cost F-35 December 2015 SAR March 21

Joint force protection advanced security system (JFPASS) "the future of force protection: integrate and automate"

NASA Astrophysics Data System (ADS)

Lama, Carlos E.; Fagan, Joe E.

2009-09-01

The United States Department of Defense (DoD) defines 'force protection' as "preventive measures taken to mitigate hostile actions against DoD personnel (to include family members), resources, facilities, and critical information." Advanced technologies enable significant improvements in automating and distributing situation awareness, optimizing operator time, and improving sustainability, which enhance protection and lower costs. The JFPASS Joint Capability Technology Demonstration (JCTD) demonstrates a force protection environment that combines physical security and Chemical, Biological, Radiological, Nuclear, and Explosive (CBRNE) defense through the application of integrated command and control and data fusion. The JFPASS JCTD provides a layered approach to force protection by integrating traditional sensors used in physical security, such as video cameras, battlefield surveillance radars, unmanned and unattended ground sensors. The optimization of human participation and automation of processes is achieved by employment of unmanned ground vehicles, along with remotely operated lethal and less-than-lethal weapon systems. These capabilities are integrated via a tailorable, user-defined common operational picture display through a data fusion engine operating in the background. The combined systems automate the screening of alarms, manage the information displays, and provide assessment and response measures. The data fusion engine links disparate sensors and systems, and applies tailored logic to focus the assessment of events. It enables timely responses by providing the user with automated and semi-automated decision support tools. The JFPASS JCTD uses standard communication/data exchange protocols, which allow the system to incorporate future sensor technologies or communication networks, while maintaining the ability to communicate with legacy or existing systems.

High heat flux performance of W-Eurofer brazed joints

NASA Astrophysics Data System (ADS)

de Prado, J.; Sánchez, M.; Wirtz, M.; Pintsuk, G.; Du, J.; Linke, J.; Ureña, A.

2018-02-01

The qualification process of the materials and components for the next generation of fusion reactors makes it necessary to expose them to similar service conditions as expected during the service life of the reactor. In the present work, W-Eurofer brazed joints (tungsten block: 8 × 8 × 4 mm; steel block: 8 × 8 × 4 mm; joined to an actively cooled copper heat sink) were exposed to steady state heat loads to study the effect of the thermal fatigue on their microstructure and mechanical integrity. Three different W surface temperatures were tested (400, 500 and 600 °C) varying the number of applied cycles (100 and 1000). The results allowed identifying a braze temperature of 359 °C as threshold condition under which the brazed joints could be used without deterioration. The increase of the surface temperature deteriorated the mechanical integrity of the joints in comparison to those analyzed after the brazing process and accordingly reduced the refrigeration capabilities.

[Compensatory joints at the pelvis (author's transl)].

PubMed

Schumacher, G; Weber, M

1980-10-01

An osteochondrosis ischio-pubica represents a "testing site" for the integrity of the pelvis not only during child age but in adults as well. If all naturally available compensatory mechanisms have been exhausted especially following a change of range of motion in the pelvis ring structure, fatigue fractures or zones in transformation in the area typical of osteochondrosis ischio-pubica may appear. These fractures or transformation zones respectively to our mind have joint character, because they are capable of temporarily replacing lost mobility of physiological joints. Healing is achieved through rest, muscular balance and a specific physiotherapy. The purpose of this muscular training is to cushion all unphysiological motions in the pelvis and to support and boost the function of those joints still well preserved.

IAIMS and JCAHO: implications for hospital librarians. Integrated Academic Information Management Systems. Joint Commission on Accreditation of Healthcare Organizations.

PubMed Central

Doyle, J D

1999-01-01

The roles of hospital librarians have evolved from keeping print materials to serving as a focal point for information services and structures within the hospital. Concepts that emerged from the Integrated Academic Information Management Systems (IAIMS) as described in the Matheson Report and the 1994 Joint Commission on Accreditation of Healthcare Organizations (JCAHO) standards have combined to propel hospital libraries into many new roles and functions. This paper will review the relationship of the two frameworks, provide a view of their commonalities, and establish the advantages of both for hospital librarianship as a profession. PMID:10550022

Professionalism in the Air Force: A Comparative Analysis of Commissioned Officers with Non-Commissioned Officers

DTIC Science & Technology

2007-03-01

60 Appendix D: Officer Performance Report and Promotion Recommendation Forms.......63 Appendix E. Sample Enlisted Performance Report...can be described in ideal terms such as character, integrity, and commitment, the desired output of professionalism is performance . Performance ...provides the incentives to do well and fuels the professional’s drive toward excellence (Sorley, 1998). The values necessary to consistently perform

The Joint Chiefs of Staff and National Policy Volume III 1950-1951, The Korean War: Part One,

DTIC Science & Technology

1998-01-01

National Policy Volume III 1950-1951 The Korean War Part One James F . Schnabel Robert J. Watson Office of Joint History Office of the Chairman...transferred to other du- ties, Mr. James F . Schnabel assumed responsibility for the volume and planned, Foreword researched, and wrote the...into publishable form. JAMES F . SCHNABEL ROBERT J.WATSON vm Contents 1. Korea in US Policy, 1945-1950 1 The Partition of Korea 1 Establishment

A patient's view on the location of the temporomandibular joint.

PubMed

Koole, Paul; Zonnenberg, Adriaan J J; Mulder, Jan

2018-03-25

Objective A survey was held to establish whether laypeople knew the location of their temporomandibular joint. Methods A sample of 61 participants, visiting their dental office for a routine check-up, was given a three-question survey of whether they knew the location of their temporomandibular joint and could point to this location. Results Thirty-eight participants answered the question affirmatively. Only 13 pointed to the correct location. Of these, six participants received consultation for TMD in the past, three participants were healthcare providers, and four participants actually had knowledge of the exact location. Out of 23 participants who did not know the location, one accidently designated the correct position. Conclusion The location of the temporomandibular joint is not a well-known site for many patients. In the presence of orofacial pain, it seems advisable to let the patient designate and record the site of the pain on a drawing on the patient chart.

Investigation Of The Effects Of Reflow Profile Parameters On Lead-free Solder Bump Volumes And Joint Integrity

NASA Astrophysics Data System (ADS)

Amalu, E. H.; Lui, Y. T.; Ekere, N. N.; Bhatti, R. S.; Takyi, G.

2011-01-01

The electronics manufacturing industry was quick to adopt and use the Surface Mount Technology (SMT) assembly technique on realization of its huge potentials in achieving smaller, lighter and low cost product implementations. Increasing global customer demand for miniaturized electronic products is a key driver in the design, development and wide application of high-density area array package format. Electronic components and their associated solder joints have reduced in size as the miniaturization trend in packaging continues to be challenged by printing through very small stencil apertures required for fine pitch flip-chip applications. At very narrow aperture sizes, solder paste rheology becomes crucial for consistent paste withdrawal. The deposition of consistent volume of solder from pad-to-pad is fundamental to minimizing surface mount assembly defects. This study investigates the relationship between volume of solder paste deposit (VSPD) and the volume of solder bump formed (VSBF) after reflow, and the effect of reflow profile parameters on lead-free solder bump formation and the associated solder joint integrity. The study uses a fractional factorial design (FFD) of 24-1 Ramp-Soak-Spike reflow profile, with all main effects and two-way interactions estimable to determine the optimal factorial combination. The results from the study show that the percentage change in the VSPD depends on the combination of the process parameters and reliability issues could become critical as the size of solder joints soldered on the same board assembly vary greatly. Mathematical models describe the relationships among VSPD, VSBF and theoretical volume of solder paste. Some factors have main effects across the volumes and a number of interactions exist among them. These results would be useful for R&D personnel in designing and implementing newer applications with finer-pitch interconnect.

Ultrasonic guided wave inspection of Inconel 625 brazed lap joints

NASA Astrophysics Data System (ADS)

Comot, Pierre; Bocher, Philippe; Belanger, Pierre

2016-04-01

The aerospace industry has been investigating the use of brazing for structural joints, as a mean of reducing cost and weight. There therefore is a need for a rapid, robust, and cost-effective non-destructive testing method for evaluating the structural integrity of the joints. The mechanical strength of brazed joints depends mainly on the amount of brittle phases in their microstructure. Ultrasonic guided waves offer the possibility of detecting brittle phases in joints using spatio-temporal measurements. Moreover, they offer the opportunity to inspect complex shape joints. This study focused on the development of a technique based on ultrasonic guided waves for the inspection of Inconel 625 lap joints brazed with BNi-2 filler metal. A finite element model of a lap joint was used to optimize the inspection parameters and assess the feasibility of detecting the amount of brittle phases in the joint. A finite element parametric study simulating the input signal shape, the center frequency, and the excitation direction was performed. The simulations showed that the ultrasonic guided wave energy transmitted through, and reflected from, the joints was proportional to the amount of brittle phases in the joint.

Enhancement of Sn-Bi-Ag Solder Joints with ENEPIG Surface Finish for Low-Temperature Interconnection

NASA Astrophysics Data System (ADS)

Pun, Kelvin P. L.; Islam, M. N.; Rotanson, Jason; Cheung, Chee-wah; Chan, Alan H. S.

2018-05-01

Low-temperature soldering constitutes a promising solution in interconnect technology with the increasing trend of heat-sensitive materials in integrated circuit packaging. Experimental work was carried out to investigate the effect of electroless Ni/electroless Pd/immersion gold (ENEPIG) layer thicknesses on Sn-Bi-Ag solder joint integrity during extended reflow at peak temperatures as low as 175°C. Optimizations are proposed to obtain reliable solder joints through analysis of interfacial microstructure with the resulting joint integrity under extended reflow time. A thin Ni(P) layer with thin Pd led to diffusion of Cu onto the interface resulting in Ni3Sn4 intermetallic compound (IMC) spalling with the formation of thin interfacial (Ni,Cu)3Sn4 IMCs which enhance the robustness of the solder after extended reflow, while thick Ni(P) with thin Pd resulted in weakened solder joints with reflow time due to thick interfacial Ni3Sn4 IMCs with the entrapped brittle Bi-phase. With a suitable thin Ni(P), the Pd thickness has to be optimized to prevent excessive Ni-P consumption and early Cu outward diffusion to enhance the solder joint during extended reflow. Based on these findings, suitable Ni(P) and Pd thicknesses of ENEPIG are recommended for the formation of robust low-temperature solder joints.

Thomas Sinks, Director, Office of the Science Advisor

EPA Pesticide Factsheets

Biography of the Director of the Office of the Science Advisor which is responsible for is responsible for EPA’s human subject research ethics, scientific integrity, and developing cross-agency science policy guidance.

Joint Attention Enhances Visual Working Memory

ERIC Educational Resources Information Center

Gregory, Samantha E. A.; Jackson, Margaret C.

2017-01-01

Joint attention--the mutual focus of 2 individuals on an item--speeds detection and discrimination of target information. However, what happens to that information beyond the initial perceptual episode? To fully comprehend and engage with our immediate environment also requires working memory (WM), which integrates information from second to…

75 FR 68856 - Agency Information Collection Activities: Submission for OMB Review; Joint Comment Request

Federal Register 2010, 2011, 2012, 2013, 2014

2010-11-09

... Information Collection Activities: Submission for OMB Review; Joint Comment Request AGENCY: Office of the..., Mailstop 2-3, Attention: 1557-0081, 250 E Street, SW., Washington, DC 20219. In addition, comments may be... 20552, Attention: ``1550-0023 (TFR: Schedule DI Revisions).'' Hand Delivery/Courier: Guard's Desk, East...

Command and Control of Joint Air Operations. Some Lessons Learned from Four Case Studies of an Enduring Issue

DTIC Science & Technology

1991-01-01

New Zealand Air Force.4 To further complicate matters, General Douglas MacArthur, as Commander Southwest Pacific Area, and the adjoining theater...Army, Marine, and New Zealand officers and the top job was rotated fairly regularly among the services.10 By early 1943 a truly joint staff had...in joint air operations. 2C. Kenneth Allard, Command, Control, and the Common Defense, Yale University Press, New Haven, 1990. The authors strongly

Functional joint regeneration is achieved using reintegration mechanism in Xenopus laevis

PubMed Central

Yamada, Shigehito

2016-01-01

Abstract A functional joint requires integration of multiple tissues: the apposing skeletal elements should form an interlocking structure, and muscles should insert into skeletal tissues via tendons across the joint. Whereas newts can regenerate functional joints after amputation, Xenopus laevis regenerates a cartilaginous rod without joints, a “spike.” Previously we reported that the reintegration mechanism between the remaining and regenerated tissues has a significant effect on regenerating joint morphogenesis during elbow joint regeneration in newt. Based on this insight into the importance of reintegration, we amputated frogs’ limbs at the elbow joint and found that frogs could regenerate a functional elbow joint between the remaining tissues and regenerated spike. During regeneration, the regenerating cartilage was partially connected to the remaining articular cartilage to reform the interlocking structure of the elbow joint at the proximal end of the spike. Furthermore, the muscles of the remaining part inserted into the regenerated spike cartilage via tendons. This study might open up an avenue for analyzing molecular and cellular mechanisms of joint regeneration using Xenopus. PMID:27499877

Argumentation Based Joint Learning: A Novel Ensemble Learning Approach

PubMed Central

Xu, Junyi; Yao, Li; Li, Le

2015-01-01

Recently, ensemble learning methods have been widely used to improve classification performance in machine learning. In this paper, we present a novel ensemble learning method: argumentation based multi-agent joint learning (AMAJL), which integrates ideas from multi-agent argumentation, ensemble learning, and association rule mining. In AMAJL, argumentation technology is introduced as an ensemble strategy to integrate multiple base classifiers and generate a high performance ensemble classifier. We design an argumentation framework named Arena as a communication platform for knowledge integration. Through argumentation based joint learning, high quality individual knowledge can be extracted, and thus a refined global knowledge base can be generated and used independently for classification. We perform numerous experiments on multiple public datasets using AMAJL and other benchmark methods. The results demonstrate that our method can effectively extract high quality knowledge for ensemble classifier and improve the performance of classification. PMID:25966359

Developing a multi-joint upper limb exoskeleton robot for diagnosis, therapy, and outcome evaluation in neurorehabilitation.

PubMed

Ren, Yupeng; Kang, Sang Hoon; Park, Hyung-Soon; Wu, Yi-Ning; Zhang, Li-Qun

2013-05-01

Arm impairments in patients post stroke involve the shoulder, elbow and wrist simultaneously. It is not very clear how patients develop spasticity and reduced range of motion (ROM) at the multiple joints and the abnormal couplings among the multiple joints and the multiple degrees-of-freedom (DOF) during passive movement. It is also not clear how they lose independent control of individual joints/DOFs and coordination among the joints/DOFs during voluntary movement. An upper limb exoskeleton robot, the IntelliArm, which can control the shoulder, elbow, and wrist, was developed, aiming to support clinicians and patients with the following integrated capabilities: 1) quantitative, objective, and comprehensive multi-joint neuromechanical pre-evaluation capabilities aiding multi-joint/DOF diagnosis for individual patients; 2) strenuous and safe passive stretching of hypertonic/deformed arm for loosening up muscles/joints based on the robot-aided diagnosis; 3) (assistive/resistive) active reaching training after passive stretching for regaining/improving motor control ability; and 4) quantitative, objective, and comprehensive neuromechanical outcome evaluation at the level of individual joints/DOFs, multiple joints, and whole arm. Feasibility of the integrated capabilities was demonstrated through experiments with stroke survivors and healthy subjects.

Ergonomic design for dental offices.

PubMed

Ahearn, David J; Sanders, Martha J; Turcotte, Claudia

2010-01-01

The increasing complexity of the dental office environment influences productivity and workflow for dental clinicians. Advances in technology, and with it the range of products needed to provide services, have led to sprawl in operatory setups and the potential for awkward postures for dental clinicians during the delivery of oral health services. Although ergonomics often addresses the prevention of musculoskeletal disorders for specific populations of workers, concepts of workflow and productivity are integral to improved practice in work environments. This article provides suggestions for improving workflow and productivity for dental clinicians. The article applies ergonomic principles to dental practice issues such as equipment and supply management, office design, and workflow management. Implications for improved ergonomic processes and future research are explored.

Virtual trajectories, joint stiffness, and changes in the limb natural frequency during single-joint oscillatory movements.

PubMed

Latash, M L

1992-07-01

In the framework of the equilibrium-point hypothesis, virtual trajectories and patterns of joint stiffness were reconstructed during voluntary single-joint oscillatory movements in the elbow joint at a variety of frequencies and against two inertial loads. At low frequencies, virtual trajectories were in-phase with the actual joint trajectories. Joint stiffness changed at a doubled frequency. An increase in movement frequency and/or inertial load led to an increase in the difference between the peaks of the actual and virtual trajectories and in both peak and averaged values of joint stiffness. At a certain, critical frequency, virtual trajectory was nearly flat. Further increase in movement frequency led to a 180 degree phase shift between the actual and virtual trajectories. The assessed values of the natural frequency of the system "limb + manipulandum" were close to the critical frequencies for both low and high inertial loads. Peak levels and integrals of the electromyograms of two flexor and two extensor muscles changed monotonically with movement frequency without any special behavior at the critical frequencies. Nearly flat virtual trajectories at the natural frequency make physical sense as hypothetical control signals, unlike the electromyographic recordings, since a system at its natural frequency requires minimal central interference. Modulation of joint stiffness is assumed to be an important adaptive mechanism attenuating difference between the system's natural frequency and desired movement frequency. Virtual trajectory is considered a behavioral observable. Phase transitions between the virtual and actual trajectories are illustrations of behavioral discontinuities introduced by slow changes in a higher level control parameter, movement frequency. Relative phase shift between these two trajectories may be considered an order parameter.

75 FR 26137 - High-Cost Universal Service Support, Federal-State Joint Board on Universal Service

Federal Register 2010, 2011, 2012, 2013, 2014

2010-05-11

... 10-56] High-Cost Universal Service Support, Federal-State Joint Board on Universal Service AGENCY... high-cost support mechanism comports with the requirements of section 254. The Commission also grants... Office of Consumer Advocate for supplemental high-cost universal service support for rural residential...

A joint watermarking/encryption algorithm for verifying medical image integrity and authenticity in both encrypted and spatial domains.

PubMed

Bouslimi, D; Coatrieux, G; Roux, Ch

2011-01-01

In this paper, we propose a new joint watermarking/encryption algorithm for the purpose of verifying the reliability of medical images in both encrypted and spatial domains. It combines a substitutive watermarking algorithm, the quantization index modulation (QIM), with a block cipher algorithm, the Advanced Encryption Standard (AES), in CBC mode of operation. The proposed solution gives access to the outcomes of the image integrity and of its origins even though the image is stored encrypted. Experimental results achieved on 8 bits encoded Ultrasound images illustrate the overall performances of the proposed scheme. By making use of the AES block cipher in CBC mode, the proposed solution is compliant with or transparent to the DICOM standard.

Prepositioned Stocks: DOD has Addressed Required Reporting Elements but Needs to Develop a Department-Wide Policy and Joint Service Approach

DTIC Science & Technology

2016-04-01

and Joint Service Approach Report to Congressional Committees April 2016 GAO-16-418 United States Government Accountability Office...United States Government Accountability Office Highlights of GAO-16-418, a report to congressional committees April 2016 PREPOSITIONED STOCKS...1 10 U.S.C. § 2229a. Letter Page 2 GAO-16-418 Prepositioned Stocks that takes into account national security threats

Repair boundary for parent tube indications within the upper joint zone of hybrid expansion joint (HEJ) sleeved tubes

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cullen, W.K.; Keating, R.F.

1997-02-01

In the Spring and Fall of 1994, and the Spring of 1995, crack-like indications were found in the upper hybrid expansion joint (HEJ) region of Steam Generator (S/G) tubes which had been sleeved using Westinghouse HEJ sleeves. As a result of these findings, analytic and test evaluations were performed to assess the effect of the degradation on the structural, and leakage, integrity of the sleeve/tube joint relative to the requirements of the United States Nuclear Regulatory Commission`s (NRC) draft Regulatory Guide (RG) 1.121. The results of these evaluations demonstrated that tubes with implied or known crack-like circumferential parent tube indicationsmore » (PTIs) located 1.1 inches or farther below the bottom of the hardroll upper transition, have sufficient, and significant, integrity relative to the requirements of RG 1.121. Thus, the purpose of this report is to provide background information related to the justification of the modified tube repair boundary.« less

Office management of minor wounds.

PubMed Central

Gouin, S.; Patel, H.

2001-01-01

OBJECTIVE: To review office interventions for minor wounds not requiring sutures, such as abrasions, bites, and lacerations. QUALITY OF EVIDENCE: Most information on minor wound management comes from descriptive studies. Few comparative studies examine the effectiveness of topical antisepsis for minor wounds. Several clinical trials have demonstrated that tissue adhesives produce short- and long-term cosmetic results equivalent to those achieved with suture materials. MAIN MESSAGE: Sterile saline is the least toxic solution for wound irrigation. Chlorhexidine (2%) and povidone iodine (10%) have been the most investigated antiseptic solutions. Systemic antibiotics are unnecessary for wounds unlikely to be infected. All bite wounds require special attention. Primary closure of bite wounds is indicated in certain circumstances: less than 12-hour-old nonpuncture wounds, uninfected wounds, and low-risk lesions (such as on the face). In spite of their many advantages, skin tapes should be used for low-tension wounds only. The popularity of tissue adhesives has greatly increased. Since the advent of newer products (with increased bonding strength and flexibility), adhesives are used to manage most lacerations except those in areas of high tension (e.g., joints) and on mucosal surfaces. CONCLUSION: Minor wounds not requiring sutures can be managed easily in the office. PMID:11340758

Subperiosteal Transmission Of Intra-Articular Pressure Between Articulated And Stationary Joints

PubMed Central

Pitkin, Mark; Muppavarapu, Raghuveer; Cassidy, Charles; Pitkin, Emil

2015-01-01

Hydrostatic pressures can be transmitted between synovial capsules. In each of ten rabbits, we simultaneously measured pressure in two joints, one of which was passively ranged, and the other of which was kept stationary. The intra-articular pressure inside the stationary joint changed every time its companion joint was ranged. But the pressure in the stationary joint did not change when the periosteum was transected above the ranged joint. This phenomenon was observed in all four animals that served as their own controls. The study suggests that the intra-articular pressure was transmitted through the space between the periosteum and the bone surface. Alternative explanations, like measurements of venous blood pressure, did not show correlation with hydrostatic pressure changes in the joints. The Floating Skeleton concept suggests a biomechanical rationale for this newly observed phenomenon: that there exists a subperiosteal hydrostatic connection of synovial joints, and that this “net” distributes excess pressures among joints through the periosteal sheath to sustain the integrity of the joint contacting surfaces over a lifetime. PMID:25632015

Developing U.S. Army Officers’ Capabilities for Joint, Interagency, Intergovernmental, and Multinational Environments

DTIC Science & Technology

2011-01-01

Combat Studies Institute, 2006. Harrell, Margaret C., John F. Schank, Harry J. Thie, Clifford M. Graf II, and Paul Steinberg, How Many Can Be Joint...Officers’ Capabilities for JIIM Environments and agencies (Rumsfeld, 2006). With the passage of the John Warner National Defense Authorization Act...Colonel Fitz Lee, the Department of Defense represen- tative at the Department of State’s Coordinator for Reconstruction and Stabilization, asserted

Diversity and Black Officer Integration in the U.S. Marine Corps for 2011 and Beyond

DTIC Science & Technology

2011-05-06

Highway, Suite 1204, Arlington, VA 22202-4302, and to the Office of Management and Budget, Paperwork Reduction Project (0704..()1BB) Washington. DC...positions as cooks, waiters , janitors, and officers’ servants. Though segregation and exclusion from combat still ruled the day, blacks in the Army were...a team is a leadership concern with diversity implications. The effectiveness of management or the military officer is predicated on that essential

Does Personality Have a Different Impact on Self-Rated Distraction, Job Satisfaction, and Job Performance in Different Office Types?

PubMed

Seddigh, Aram; Berntson, Erik; Platts, Loretta G; Westerlund, Hugo

2016-01-01

This study investigates the joint effect of office type (cell, shared room, open-plan, and flex) and personality, measured by the Big Five personality traits, on self-rated measures of distraction, job satisfaction, and job performance (measured by professional efficacy). Regression analyses with interactions between personality and office type were conducted on 1205 participants working in 5 organizations from both the private and public sectors. While few interactions were observed in the cases of professional efficacy and job satisfaction, several were observed between personality traits and office type on the level of distraction reported. Specifically, more emotionally stable participants reported lower distraction, particularly those working in flex offices. Both agreeableness and openness to experience were associated with higher levels of distraction among participants in open-plan compared to cell offices.

Does Personality Have a Different Impact on Self-Rated Distraction, Job Satisfaction, and Job Performance in Different Office Types?

PubMed Central

Seddigh, Aram; Berntson, Erik; Platts, Loretta G.; Westerlund, Hugo

2016-01-01

This study investigates the joint effect of office type (cell, shared room, open-plan, and flex) and personality, measured by the Big Five personality traits, on self-rated measures of distraction, job satisfaction, and job performance (measured by professional efficacy). Regression analyses with interactions between personality and office type were conducted on 1205 participants working in 5 organizations from both the private and public sectors. While few interactions were observed in the cases of professional efficacy and job satisfaction, several were observed between personality traits and office type on the level of distraction reported. Specifically, more emotionally stable participants reported lower distraction, particularly those working in flex offices. Both agreeableness and openness to experience were associated with higher levels of distraction among participants in open-plan compared to cell offices. PMID:27223898

Phalangeal joints kinematics during ostrich (Struthio camelus) locomotion

PubMed Central

Ji, Qiaoli; Luo, Gang; Xue, Shuliang; Ma, Songsong; Li, Jianqiao

2017-01-01

The ostrich is a highly cursorial bipedal land animal with a permanently elevated metatarsophalangeal joint supported by only two toes. Although locomotor kinematics in walking and running ostriches have been examined, these studies have been largely limited to above the metatarsophalangeal joint. In this study, kinematic data of all major toe joints were collected from gaits with double support (slow walking) to running during stance period in a semi-natural setup with two selected cooperative ostriches. Statistical analyses were conducted to investigate the effect of locomotor gait on toe joint kinematics. The MTP3 and MTP4 joints exhibit the largest range of motion whereas the first phalangeal joint of the 4th toe shows the largest motion variability. The interphalangeal joints of the 3rd and 4th toes present very similar motion patterns over stance phases of slow walking and running. However, the motion patterns of the MTP3 and MTP4 joints and the vertical displacement of the metatarsophalangeal joint are significantly different during running and slow walking. Because of the biomechanical requirements, osctriches are likely to select the inverted pendulum gait at low speeds and the bouncing gait at high speeds to improve movement performance and energy economy. Interestingly, the motions of the MTP3 and MTP4 joints are highly synchronized from slow to fast locomotion. This strongly suggests that the 3rd and 4th toes really work as an “integrated system” with the 3rd toe as the main load bearing element whilst the 4th toe as the complementary load sharing element with a primary role to ensure the lateral stability of the permanently elevated metatarsophalangeal joint. PMID:28097064

Co-Leadership – A Management Solution for Integrated Health and Social Care

PubMed Central

Hansson, Johan; Hasson, Henna; Sachs, Magna Andreen

2016-01-01

Introduction: Co-leadership has been identified as one approach to meet the managerial challenges of integrated services, but research on the topic is limited. In the present study, co-leadership, practised by pairs of managers – each manager representing one of the two principal organizations in integrated health and social care services – was explored. Aim: To investigate co-leadership in integrated health and social care, identify essential preconditions in fulfilling the management assignment, its operationalization and impact on provision of sustainable integration of health and social care. Method: Interviews with eight managers exercising co-leadership were analysed using directed content analysis. Respondent validation was conducted through additional interviews with the same managers. Results: Key contextual preconditions were an organization-wide model supporting co-leadership and co-location of services. Perception of the management role as a collective activity, continuous communication and lack of prestige were essential personal and interpersonal preconditions. In daily practice, office sharing, being able to give and take and support each other contributed to provision of sustainable integration of health and social care. Conclusion and discussion: Co-leadership promoted robust management by providing broader competence, continuous learning and joint responsibility for services. Integrated health and social care services should consider employing co-leadership as a managerial solution to achieve sustainability. PMID:27616963

76 FR 60006 - Joint Europe Africa Deployment & Distribution Conference 2011: “Adapting To Challenge and Change”

Federal Register 2010, 2011, 2012, 2013, 2014

2011-09-28

... DEPARTMENT OF DEFENSE Office of the Secretary Joint Europe Africa Deployment & Distribution Conference 2011: ``Adapting To Challenge and Change'' AGENCY: United States Africa Command, Department of Defense (DoD). ACTION: Notice of conference. SUMMARY: This document announces that U.S. Africa Command...

The Joint Tactical Aerial Resupply Vehicle Impact on Sustainment Operations

DTIC Science & Technology

2017-06-09

Artificial Intelligence , Sustainment Operations, Rifle Company, Autonomous Aerial Resupply, Joint Tactical Autonomous Aerial Resupply System 16...Integrations and Development System AI Artificial Intelligence ARCIC Army Capabilities Integration Center ARDEC Armament Research, Development and...semi- autonomous systems, and fully autonomous systems. Autonomy of machines depends on sophisticated software, including Artificial Intelligence

Programs of the Office of the Science Advisor (OSA)

EPA Pesticide Factsheets

Office of the Science Advisor provides leadership in cross-Agency science and science policy. Program areas: Risk Assessment, Science and Technology Policy, Human Subjects Research, Environmental Measurement and Modeling, Scientific Integrity.

20 CFR 422.5 - District offices and branch offices.

Code of Federal Regulations, 2012 CFR

2012-04-01

... office is the manager. The principal officer in each branch office is the officer-in-charge. Each... 20 Employees' Benefits 2 2012-04-01 2012-04-01 false District offices and branch offices. 422.5... and Functions of the Social Security Administration § 422.5 District offices and branch offices. There...

20 CFR 422.5 - District offices and branch offices.

Code of Federal Regulations, 2014 CFR

2014-04-01

... office is the manager. The principal officer in each branch office is the officer-in-charge. Each... 20 Employees' Benefits 2 2014-04-01 2014-04-01 false District offices and branch offices. 422.5... and Functions of the Social Security Administration § 422.5 District offices and branch offices. There...

Junior Purple Log-Warriors: Joint Entry-Level Training for Logistics Personnel

DTIC Science & Technology

2016-02-01

technical training. This option would have the lowest net cost and would be the most effective in joint integration and development of an... premium on the need for all levels of joint logisticians that are able to respond quickly, flexibly, and jointly to the unexpected. The (United States...Army Logistics Management College, is for active or reserve O-3 to O-5s, W-3 to W-5s, E-8 to E-9s, and GS-12 to GS/GM-14s. A similar course of the

Energy Integrated Lighting-Heating-Cooling System.

ERIC Educational Resources Information Center

Meckler, Gershon; And Others

1964-01-01

Energy balance problems in the design of office buildings are analyzed. Through the use of integrated systems utilizing dual purpose products, a controlled environment with minimum expenditure of energy, equipment and space can be provided. Contents include--(1) office building occupancy loads, (2) office building heating load analysis, (3) office…

Human Exploration Science Office (KX) Overview

NASA Technical Reports Server (NTRS)

Calhoun, Tracy A.

2014-01-01

The Human Exploration Science Office supports human spaceflight, conducts research, and develops technology in the areas of space orbital debris, hypervelocity impact technology, image science and analysis, remote sensing, imagery integration, and human and robotic exploration science. NASA's Orbital Debris Program Office (ODPO) resides in the Human Exploration Science Office. ODPO provides leadership in orbital debris research and the development of national and international space policy on orbital debris. The office is recognized internationally for its measurement and modeling of the debris environment. It takes the lead in developing technical consensus across U.S. agencies and other space agencies on debris mitigation measures to protect users of the orbital environment. The Hypervelocity Impact Technology (HVIT) project evaluates the risks to spacecraft posed by micrometeoroid and orbital debris (MMOD). HVIT facilities at JSC and White Sands Test Facility (WSTF) use light gas guns, diagnostic tools, and high-speed imagery to quantify the response of spacecraft materials to MMOD impacts. Impact tests, with debris environment data provided by ODPO, are used by HVIT to predict risks to NASA and commercial spacecraft. HVIT directly serves NASA crew safety with MMOD risk assessments for each crewed mission and research into advanced shielding design for future missions. The Image Science and Analysis Group (ISAG) supports the International Space Station (ISS) and commercial spaceflight through the design of imagery acquisition schemes (ground- and vehicle-based) and imagery analyses for vehicle performance assessments and mission anomaly resolution. ISAG assists the Multi-Purpose Crew Vehicle (MPCV) Program in the development of camera systems for the Orion spacecraft that will serve as data sources for flight test objectives that lead to crewed missions. The multi-center Imagery Integration Team is led by the Human Exploration Science Office and provides

Mechanical end joint system for connecting structural column elements

NASA Technical Reports Server (NTRS)

Bush, Harold G. (Inventor); Mikulas, Martin M., Jr. (Inventor); Wallsom, Richard E. (Inventor)

1990-01-01

A mechanical end joint system is presented that eliminates the possibility of free movements between the joint halves during loading or vibration. Both node joint body (NJB) and column end joint body (CEJB) have cylindrical engaging ends. Each of these ends has an integral semicircular tongue and groove. The two joint halves are engaged transversely - the tongue of the NJB mating with the groove of the CEJB and vice versa. The joint system employs a spring loaded internal latch mechanism housed in the CEJB. During mating, this mechanism is pushed away from the NJB and enters the NJB when mating is completed. In order to lock the joint and add a preload across the tongue and groove faces, an operating ring collar is rotated through 45 deg causing an internal mechanism to compress a Belleville washer preload mechanism. This causes an equal and opposite force to be exerted on the latch bolt and the latch plunger. This force presses the two joint halves tightly together. In order to prevent inadvertent disassembly, a secondary lock is also engaged when the joint is closed. Plungers are carried in the operating ring collar. When the joint is closed, the plungers fall into tracks on the CEJB, which allows the joint to be opened only when the operating ring collar and plungers are pushed directly away from the joining end. One application of this invention is the rapid assembly and disassembly of diverse skeletal framework structures which is extremely important in many projects involving the exploration of space.

Integrating dental data in missing persons and unidentified remains investigations: the RESOLVE INITIATIVE and DIP3.

PubMed

Kogon, S; Arnold, J; Wood, R; Merner, L

2010-04-15

DIP3, a computerized aid to assist in dental identification, was integrated into the RESOLVE INITIATIVE, a joint endeavour by the Ontario Provincial Police and the Office of the Chief Coroner for Ontario, to resolve cases of missing persons (MP) and unidentified remains (UNID). Dental data, from the UNID, collected by the coroner and the dental records of MP, provided by investigating police, are streamed separately for input into a dedicated computer program. All dental management is provided by forensic dentists. The advantage of having experienced dentists managing this data is explained. A description of the RESOLVE INITIATIVE and DIP3, including the method used for record transmission is provided. Copyright 2009 Elsevier Ireland Ltd. All rights reserved.

In vitro V(D)J recombination: signal joint formation.

PubMed

Cortes, P; Weis-Garcia, F; Misulovin, Z; Nussenzweig, A; Lai, J S; Li, G; Nussenzweig, M C; Baltimore, D

1996-11-26

The first step of V(D)J recombination, specific cleavage at the recombination signal sequence (RSS), can be carried out by the recombination activating proteins RAG1 and RAG2. In vivo, the cleaved coding and signal ends must be rejoined to generate functional antigen receptors and maintain chromosomal integrity. We have investigated signal joint formation using deletion and inversion substrates in a cell free system. RAG1 and RAG2 alone or in combination were unable to generate signal joints. However, RAG1 and RAG2 complemented with nuclear extracts were able to recombine an extrachromosomal substrate and form precise signal joints. The in vitro reaction resembled authentic V(D)J recombination in being Ku-antigen-dependent.

78 FR 45187 - Notice of a Joint Technical Assistance Workshop for Preparing Fiscal Year (FY) 2014 Grant...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-07-26

... for programs authorized by Title VI of the Higher Education Act (HEA) that the Department expects to... DEPARTMENT OF EDUCATION Notice of a Joint Technical Assistance Workshop for Preparing Fiscal Year (FY) 2014 Grant Applications AGENCY: International and Foreign Language Education, Office of...

76 FR 43549 - Office of Thrift Supervision Integration; Dodd-Frank Act Implementation

Federal Register 2010, 2011, 2012, 2013, 2014

2011-07-21

...The Office of the Comptroller of the Currency (OCC) is adopting amendments to its regulations governing organization and functions, availability and release of information, post-employment restrictions for senior examiners, and assessment of fees to incorporate the transfer of certain functions of the Office of Thrift Supervision (OTS) to the OCC pursuant to Title III of the Dodd-Frank Wall Street Reform and Consumer Protection Act. The OCC also is amending its rules pertaining to preemption and visitorial powers to implement various sections of the Act; change in control of credit card banks and trust banks to implement section 603 of the Act; and deposit- taking by uninsured Federal branches to implement section 335 of the Act.

Establishing a Research and Evaluation Capability for the Joint Medical Education and Training Campus.

PubMed

Kirby, Sheila Nataraj; Marsh, Julie A; Thie, Harry J

2011-01-01

In calling for the transformation of military medical education and training, the 2005 Base Realignment and Closure Commission recommended relocating basic and specialty enlisted medical training to a single site to take advantage of economies of scale and the opportunity for joint training. As a result, a joint medical education and training campus (METC) has been established at Fort Sam Houston, Texas. Two of METC's primary long-term goals are to become a high-performing learning organization and to seek accreditation as a community college. Such goals require a clear model of organizational improvement with well-defined metrics for measuring its performance and using research and evaluation to assess and improve that performance. Lessons learned from a review of practices at institutions with similar missions-such as community colleges, corporate universities, the UK's Defence Medical Education and Training Agency, and other federal agencies, such as the Veterans Health Administration-establish a clear need for an office of institutional research to help METC attain its organizational goals. They also provide useful recommendations regarding the METC office's structure, scope, and governance.

Establishing a Research and Evaluation Capability for the Joint Medical Education and Training Campus

PubMed Central

Kirby, Sheila Nataraj; Marsh, Julie A.; Thie, Harry J.

2011-01-01

Abstract In calling for the transformation of military medical education and training, the 2005 Base Realignment and Closure Commission recommended relocating basic and specialty enlisted medical training to a single site to take advantage of economies of scale and the opportunity for joint training. As a result, a joint medical education and training campus (METC) has been established at Fort Sam Houston, Texas. Two of METC's primary long-term goals are to become a high-performing learning organization and to seek accreditation as a community college. Such goals require a clear model of organizational improvement with well-defined metrics for measuring its performance and using research and evaluation to assess and improve that performance. Lessons learned from a review of practices at institutions with similar missions—such as community colleges, corporate universities, the UK's Defence Medical Education and Training Agency, and other federal agencies, such as the Veterans Health Administration—establish a clear need for an office of institutional research to help METC attain its organizational goals. They also provide useful recommendations regarding the METC office's structure, scope, and governance. PMID:28083182

Implementation of Integrated Service Networks under the Quebec Mental Health Reform: Facilitators and Barriers associated with Different Territorial Profiles.

PubMed

Fleury, Marie-Josée; Grenier, Guy; Vallée, Catherine; Aubé, Denise; Farand, Lambert

2017-03-10

This study evaluates implementation of the Quebec Mental Health Reform (2005-2015), which promoted the development of integrated service networks, in 11 local service networks organized into four territorial groups according to socio-demographic characteristics and mental health services offered. Data were collected from documents concerning networks; structured questionnaires completed by 90 managers and by 16 respondent-psychiatrists; and semi-structured interviews with 102 network stakeholders. Factors associated with implementation and integration were organized according to: 1) reform characteristics; 2) implementation context; 3) organizational characteristics; and 4) integration strategies. While local networks were in a process of development and expansion, none were fully integrated at the time of the study. Facilitators and barriers to implementation and integration were primarily associated with organizational characteristics. Integration was best achieved in larger networks including a general hospital with a psychiatric department, followed by networks with a psychiatric hospital. Formalized integration strategies such as service agreements, liaison officers, and joint training reduced some barriers to implementation in networks experiencing less favourable conditions. Strategies for the implementation of healthcare reform and integrated service networks should include sustained support and training in best-practices, adequate performance indicators and resources, formalized integration strategies to improve network coordination and suitable initiatives to promote staff retention.

20 CFR 422.5 - District offices and branch offices.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 20 Employees' Benefits 2 2010-04-01 2010-04-01 false District offices and branch offices. 422.5... and Functions of the Social Security Administration § 422.5 District offices and branch offices. There are over 700 social security district offices and branch offices located in the principal cities and...

Multidisciplinary approach for in-deep assessment of joint prosthesis failure.

PubMed

Tessarolo, F; Caola, I; Piccoli, F; Dorigotti, P; Demattè, E; Molinari, M; Malavolta, M; Barbareschi, M; Caciagli, P; Nollo, G

2009-01-01

In spite of advancement in biomaterials and biomechanics, in development of new osteo-integrative materials and coatings, and in macro- micro- component design, a non negligible fraction of the implanted prosthesis fails before the expected lifetime. A prospective observational clinical study has been conducted to define and apply a set of experimental techniques to in-deep assess the failure of joint prosthesis. Microbiological, histological and micro-structural techniques were implemented to specifically address phenomena occurring at the tissue-implant interface. Results obtained from 27 cases of prosthetic joint failure are discussed in terms of sensitivity and specificity. A procedural flow-chart is finally proposed for the assessment of joint prosthesis failure.

Mechanical Behavior of CFRP Lattice Core Sandwich Bolted Corner Joints

NASA Astrophysics Data System (ADS)

Zhu, Xiaolei; Liu, Yang; Wang, Yana; Lu, Xiaofeng; Zhu, Lingxue

2017-12-01

The lattice core sandwich structures have drawn more attention for the integration of load capacity and multifunctional applications. However, the connection of carbon fibers reinforced polymer composite (CFRP) lattice core sandwich structure hinders its application. In this paper, a typical connection of two lattice core sandwich panels, named as corner joint or L-joint, was investigated by experiment and finite element method (FEM). The mechanical behavior and failure mode of the corner joints were discussed. The results showed that the main deformation pattern and failure mode of the lattice core sandwich bolted corner joints structure were the deformation of metal connector and indentation of the face sheet in the bolt holes. The metal connectors played an important role in bolted corner joints structure. In order to save the calculation resource, a continuum model of pyramid lattice core was used to replace the exact structure. The computation results were consistent with experiment, and the maximum error was 19%. The FEM demonstrated the deflection process of the bolted corner joints structure visually. So the simplified FEM can be used for further analysis of the bolted corner joints structure in engineering.

Characterization of Nitinol Laser-Weld Joints by Nondestructive Testing

NASA Astrophysics Data System (ADS)

Wohlschlögel, Markus; Gläßel, Gunter; Sanchez, Daniela; Schüßler, Andreas; Dillenz, Alexander; Saal, David; Mayr, Peter

2015-12-01

Joining technology is an integral part of today's Nitinol medical device manufacturing. Besides crimping and riveting, laser welding is often applied to join components made from Nitinol to Nitinol, as well as Nitinol components to dissimilar materials. Other Nitinol joining techniques include adhesive bonding, soldering, and brazing. Typically, the performance of joints is assessed by destructive mechanical testing, on a process validation base. In this study, a nondestructive testing method—photothermal radiometry—is applied to characterize small Nitinol laser-weld joints used to connect two wire ends via a sleeve. Two different wire diameters are investigated. Effective joint connection cross sections are visualized using metallography techniques. Results of the nondestructive testing are correlated to data from destructive torsion testing, where the maximum torque at fracture is evaluated for the same joints and criteria for the differentiation of good and poor laser-welding quality by nondestructive testing are established.

Experimental Robot Position Sensor Fault Tolerance Using Accelerometers and Joint Torque Sensors

NASA Technical Reports Server (NTRS)

Aldridge, Hal A.; Juang, Jer-Nan

1997-01-01

Robot systems in critical applications, such as those in space and nuclear environments, must be able to operate during component failure to complete important tasks. One failure mode that has received little attention is the failure of joint position sensors. Current fault tolerant designs require the addition of directly redundant position sensors which can affect joint design. The proposed method uses joint torque sensors found in most existing advanced robot designs along with easily locatable, lightweight accelerometers to provide a joint position sensor fault recovery mode. This mode uses the torque sensors along with a virtual passive control law for stability and accelerometers for joint position information. Two methods for conversion from Cartesian acceleration to joint position based on robot kinematics, not integration, are presented. The fault tolerant control method was tested on several joints of a laboratory robot. The controllers performed well with noisy, biased data and a model with uncertain parameters.

77 FR 36273 - Notification of a Joint Public Meeting of the Chartered Science Advisory Board and Chartered...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-06-18

... Communities; Chemical Safety for Sustainability; Human Health Risk Assessment; and Homeland Security. ORD...) and a public teleconference on September 19, 2011 (76 FR 54463) to develop a report, Office of Research and Development (ORD) New Strategic Research Directions: A Joint Report of the Science Advisory...

Effect of Gold on the Microstructural Evolution and Integrity of a Sintered Silver Joint

NASA Astrophysics Data System (ADS)

Muralidharan, Govindarajan; Leonard, Donovan N.; Meyer, Harry M.

2017-07-01

There is a need for next-generation, high-performance power electronic packages and systems employing wide-bandgap devices to operate at high temperatures in automotive and electric grid applications. Sintered silver joints are currently being evaluated as an alternative to Pb-free solder joints. Of particular interest is the development of joints based on silver paste consisting of nano- or micron-scale particles that can be processed without application of external pressure. The microstructural evolution at the interface of a pressureless-sintered silver joint formed between a SiC die with Ti/Ni/Au metallization and an active metal brazed (AMB) substrate with Ag metallization at 250°C has been evaluated using scanning electron microscopy (SEM), x-ray microanalysis, and x-ray photoelectron spectroscopy (XPS). Results from focused ion beam (FIB) cross-sections show that, during sintering, pores in the sintered region near to the Au layer tend to be narrow and elongated with long axis oriented parallel to the interface. Further densification results in formation of many small, relatively equiaxed pores aligned parallel to the interface, creating a path for easy crack propagation. X-ray microanalysis results confirm interdiffusion between Au and Ag and that a region with poor mechanical strength is formed at the edge of this region of interdiffusion.

24 CFR 943.148 - What procurement standards apply to PHAs selecting partners for a joint venture?

Code of Federal Regulations, 2011 CFR

2011-04-01

... 24 Housing and Urban Development 4 2011-04-01 2011-04-01 false What procurement standards apply to PHAs selecting partners for a joint venture? 943.148 Section 943.148 Housing and Urban Development REGULATIONS RELATING TO HOUSING AND URBAN DEVELOPMENT (CONTINUED) OFFICE OF ASSISTANT SECRETARY FOR PUBLIC AND...

Joint attention helps infants learn new words: event-related potential evidence.

PubMed

Hirotani, Masako; Stets, Manuela; Striano, Tricia; Friederici, Angela D

2009-04-22

This study investigated the role of joint attention in infants' word learning. Infants aged 18-21 months were taught new words in two social contexts, joint attention (eye contact, positive tone of voice) or non-joint attention (no eye contact, neutral tone of voice). Event-related potentials were measured as the infants saw objects either congruent or incongruent with the taught words. For both social contexts, an early negativity was observed for the congruent condition, reflecting a phonological-lexical priming effect between objects and the taught words. In addition, for the joint attention, the incongruent condition elicited a late, widely distributed negativity, attributed to semantic integration difficulties. Thus, social cues have an impact on how words are learned and represented in a child's mental lexicon.

Joint venture versus outreach: a financial analysis of case studies.

PubMed

Forsman, R W

2001-01-01

Medical centers across the country are facing cost challenges, and national commercial laboratories are experiencing financial declines that necessitate their capturing market share in any way possible. Many laboratories are turning to joint ventures or partnerships for financial relief. However, it often is in the best interest of the patient and the medical center to integrate laboratory services across the continuum of care. This article analyzes two hypothetical joint ventures involving a laboratory management agreement and full laboratory outsourcing.

An Approach and Framework to Synchronize Joint Exercises and Training with Military Operations

DTIC Science & Technology

2014-06-06

13. SUPPLEMENTARY NOTES 14. ABSTRACT In this dynamic, complex, and uncertain global environment, supporting and conducting joint military...achieved by leveraging a globally networked approach and an integrated framework that shares resources and coordinates activities. A recommended...Intentionally left blank ABSTRACT In this dynamic, complex, and uncertain global environment, supporting and conducting joint military

37 CFR 1.414 - The United States Patent and Trademark Office as a Designated Office or Elected Office.

Code of Federal Regulations, 2013 CFR

2013-07-01

... Trademark Office as a Designated Office or Elected Office. 1.414 Section 1.414 Patents, Trademarks, and Copyrights UNITED STATES PATENT AND TRADEMARK OFFICE, DEPARTMENT OF COMMERCE GENERAL RULES OF PRACTICE IN... Trademark Office as a Designated Office or Elected Office. (a) The United States Patent and Trademark Office...

37 CFR 1.414 - The United States Patent and Trademark Office as a Designated Office or Elected Office.

Code of Federal Regulations, 2011 CFR

2011-07-01

... Trademark Office as a Designated Office or Elected Office. 1.414 Section 1.414 Patents, Trademarks, and Copyrights UNITED STATES PATENT AND TRADEMARK OFFICE, DEPARTMENT OF COMMERCE GENERAL RULES OF PRACTICE IN... Trademark Office as a Designated Office or Elected Office. (a) The United States Patent and Trademark Office...

37 CFR 1.414 - The United States Patent and Trademark Office as a Designated Office or Elected Office.

Code of Federal Regulations, 2012 CFR

2012-07-01

... Trademark Office as a Designated Office or Elected Office. 1.414 Section 1.414 Patents, Trademarks, and Copyrights UNITED STATES PATENT AND TRADEMARK OFFICE, DEPARTMENT OF COMMERCE GENERAL RULES OF PRACTICE IN... Trademark Office as a Designated Office or Elected Office. (a) The United States Patent and Trademark Office...

37 CFR 1.414 - The United States Patent and Trademark Office as a Designated Office or Elected Office.

Code of Federal Regulations, 2014 CFR

2014-07-01

... Trademark Office as a Designated Office or Elected Office. 1.414 Section 1.414 Patents, Trademarks, and Copyrights UNITED STATES PATENT AND TRADEMARK OFFICE, DEPARTMENT OF COMMERCE GENERAL RULES OF PRACTICE IN... Trademark Office as a Designated Office or Elected Office. (a) The United States Patent and Trademark Office...

Creating Joint Attentional Frames and Pointing to Evidence in the Reading and Writing Process

ERIC Educational Resources Information Center

Unger, John A.; Liu, Rong; Scullion, Vicki A.

2015-01-01

This theory-into-practice paper integrates Tomasello's concept of Joint Attentional Frames and well-known ideas related to the work of Russian psychologist, Lev Vygotsky, with more recent ideas from social semiotics. Classroom procedures for incorporating student-created Joint Attentional Frames into literacy lessons are explained by links to…

Fires. A Joint Publication for U.S. Artillery Professionals. January - February 2012

DTIC Science & Technology

2012-01-01

support). Just as a musician has to learn the fundamentals of his instrument and how to produce the desired melody, young officers must learn the...Approved for public release; distribution is unlimited. • Headquarters, Department of the Army • PB644-12-1 Adapting young leaders through learning...progress, developments and best use in campaigns; cultivates a common understanding of the power, limitations and application of joint Fires, both

Discussion on joint operation of wind farm and pumped-storage hydroplant

NASA Astrophysics Data System (ADS)

Li, Caifang; Wu, Yichun; Liang, Hao; Li, Miao

2017-12-01

Due to the random fluctuations in wind power, large amounts of grid integration will have a negative impact on grid operation and the consumers. The joint operation with pumped-storage hydroplant with good peak shaving performance can effectively reduce the negative impact on the safety and economic operation of power grid, and improve the utilization of wind power. In addition, joint operation can achieve the optimization of green power and improve the comprehensive economic benefits. Actually, the rational profit distribution of joint operation is the premise of sustainable and stable cooperation. This paper focuses on the profit distribution of joint operation, and applies improved shapely value method, which taking the investments and the contributions of each participant in the cooperation into account, to determine the profit distribution. Moreover, the distribution scheme can provide an effective reference for the actual joint operation of wind farm and pumped-storage hydroplant.

Analysis on the Fracture of Al-Cu Dissimilar Materials Friction Stir Welding Lap Joint

NASA Astrophysics Data System (ADS)

Sun, Hongyu; Zhou, Qi; Zhu, Jun; Peng, Yong

2017-12-01

Friction stir welding (FWS) is regarded as a more plausible alternative to other welding methods for Al-Cu dissimilar joining. However, the structure of an FSW joint is different from others. In this study, lap joints of 6061 aluminum alloy and commercially pure copper were produced by FSW, and the effects of rotation rate on macromorphology, microstructure and mechanical properties were investigated. In addition, a fracture J integral model was used to analyze the effect of microstructure on the mechanical properties. The results revealed that the macrodefect-free joints were obtained at a feed rate of 150 mm/min and 1100 rpm and that the failure load of the joint reached as high as 4.57 kN and only reached 2.91 kN for the 900 rpm, where tunnel defects were identified. Particle-rich zones composed of Cu particles dispersed in an Al matrix, and "Flow tracks" were observed by the EDS. The J integral results showed that the microdefects on the advancing side cause serious stress concentration compared with the microdefects located on the Al-Cu interface, resulting in the fracture of the joints.

Modular Heat Exchanger With Integral Heat Pipe

NASA Technical Reports Server (NTRS)

Schreiber, Jeffrey G.

1992-01-01

Modular heat exchanger with integral heat pipe transports heat from source to Stirling engine. Alternative to heat exchangers depending on integrities of thousands of brazed joints, contains only 40 brazed tubes.

Integrating Instant Messenger into Online Office Hours to Enhance Synchronous Online Interaction in Teacher Education

ERIC Educational Resources Information Center

Lih-Ching, Chen Wang; Beasley, William

2006-01-01

Modern communication technologies have modified the tradition of instructor's office hours in numerous ways. This article explores the use of Instant Messenger (IM) software in the context of "online office hours". The authors discuss strengths and weaknesses of IM interactions for instructor/student communication, and examine a sample of such…

Effect of Gold on the Microstructural Evolution and Integrity of a Sintered Silver Joint

DOE PAGES

Muralidharan, Govindarajan; Leonard, Donovan N.; Meyer, Harry M.

2017-01-05

There is a need for next-generation, high-performance power electronic packages and systems employing wide band gap devices to operate at high temperatures in automotive and electric grid applications. Sintered silver joints are currently being evaluated as an alternative to Pb-free solder joints. Of particular interest is the development of joints based on silver paste consisting of nanoscale or micron scale particles that can be processed without the application of an external pressure. Microstructural evolution at the interface of a pressureless sintered silver joint formed between a SiC die with a Ti/Ni/Au metallization and an Active Metal Brazed substrate with Agmore » metallization at 250 °C was evaluated using Scanning Electron Microscopy, X-ray microanalysis, and X-ray Photo Electron Spectroscopy. Results from Focused Ion Beam cross-sections show that during sintering, the pores in the sintered region close to the Au layer tend to be smaller and are oriented predominantly with their longer dimension oriented parallel to the interface. With further densification, this results in the alignment of small pores parallel to the interface, creating a path for easy crack propagation. Lastly, X-ray microchemical analyses results confirm interdiffusion between Au and Ag and that a region with poor mechanical strength is formed at the edge of this region of interdiffusion.« less

Joint Forward Operating Base Elements of Command and Control

NASA Astrophysics Data System (ADS)

Summers, William C.

2002-01-01

Since the 1986 Goldwater-Nichols Act directed the Chairman of the Joint Chiefs of Staff to develop doctrine for the joint employment of the armed forces, tactics, techniques, and procedures have evolved at different rates depending on the competency. Whereas the command of joint air forces is well prescribed within the structure of the air operations center and its associated leadership, command of air assets at a joint forward operating base lacks guidance. Today, the United States prosecutes an air war over Afghanistan from bases in Uzbekistan, Pakistan, and Afghanistan. Elements of the United States Army, Air Force, and Marines combine at these geographically minute locations, each bringing a certain complement of support and command and control. Evidence from operations during the 1999 air war for Kosovo at Tirana Rinas Airport in Albania suggests that when these service elements meet at the airfield for the first time, there are problems associated with local procedure. At best, time is wasted creating local joint systems to overcome the difficulties. At worst, safety and mission accomplishment are jeopardized. This thesis will address the need to develop doctrine and a jointly integrated organization to support the command and control function at a forward operating base.

Fuels Branch Reorganization: A Study of the Fuels Officer and the Fuels Organization.

DTIC Science & Technology

1985-09-01

faculty advisor, Captain Richard D. Mabe , and my reader, Mr. Patrick M. Bresnahan for their suggestions and counsel. Finally, I want to thank my family...Western Publishing Company, 1963. 4. Crump, Lt Col James C., Director of Logistics. Tele- phone interview. Office of the Joint Chief of Staff, Pentagon...Energy Management Division. Telephone interview. HQ SAC/LGSF, Offutt AFB NE, 18 Nov 1984. 18. McClave, James T. and P. George Benson. Statistics for

77 FR 32655 - DHS Data Privacy and Integrity Advisory Committee

Federal Register 2010, 2011, 2012, 2013, 2014

2012-06-01

... Officer, Data Privacy and Integrity Advisory Committee, Department of Homeland Security, 245 Murray Lane..., DHS Data Privacy and Integrity Advisory Committee, Department of Homeland Security, 245 Murray Lane SW... DEPARTMENT OF HOMELAND SECURITY Office of the Secretary [Docket No. DHS-2012-0029] DHS Data...

49 CFR 1.48 - Office of the Chief Information Officer.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 49 Transportation 1 2012-10-01 2012-10-01 false Office of the Chief Information Officer. 1.48... POWERS AND DUTIES Office of the Secretary Ost Officials § 1.48 Office of the Chief Information Officer. The Chief Information Officer (CIO) is the principal information technology (IT), cyber security...

49 CFR 1.48 - Office of the Chief Information Officer.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 49 Transportation 1 2013-10-01 2013-10-01 false Office of the Chief Information Officer. 1.48... POWERS AND DUTIES Office of the Secretary Ost Officials § 1.48 Office of the Chief Information Officer. The Chief Information Officer (CIO) is the principal information technology (IT), cyber security...

49 CFR 1.48 - Office of the Chief Information Officer.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 49 Transportation 1 2014-10-01 2014-10-01 false Office of the Chief Information Officer. 1.48... POWERS AND DUTIES Office of the Secretary Ost Officials § 1.48 Office of the Chief Information Officer. The Chief Information Officer (CIO) is the principal information technology (IT), cyber security...

12 CFR 573.13 - Exception to opt out requirements for service providers and joint marketing.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 12 Banks and Banking 5 2010-01-01 2010-01-01 false Exception to opt out requirements for service providers and joint marketing. 573.13 Section 573.13 Banks and Banking OFFICE OF THRIFT SUPERVISION, DEPARTMENT OF THE TREASURY PRIVACY OF CONSUMER FINANCIAL INFORMATION Exceptions § 573.13 Exception to opt out requirements for service providers and...

3-D Analysis of Flanged Joints Through Various Preload Methods Using ANSYS

NASA Astrophysics Data System (ADS)

Murugan, Jeyaraj Paul; Kurian, Thomas; Jayaprakash, Janardhan; Sreedharapanickar, Somanath

2015-10-01

Flanged joints are being employed in aerospace solid rocket motor hardware for the integration of various systems or subsystems. Hence, the design of flanged joints is very important in ensuring the integrity of motor while functioning. As these joints are subjected to higher loads due to internal pressure acting inside the motor chamber, an appropriate preload is required to be applied in this joint before subjecting it to the external load. Preload, also known as clamp load, is applied on the fastener and helps to hold the mating flanges together. Generally preload is simulated as a thermal load and the exact preload is obtained through number of iterations. Infact, more iterations are required when considering the material nonlinearity of the bolt. This way of simulation will take more computational time for generating the required preload. Now a days most commercial software packages use pretension elements for simulating the preload. This element does not require iterations for inducing the preload and it can be solved with single iteration. This approach takes less computational time and thus one can study the characteristics of the joint easily by varying the preload. When the structure contains more number of joints with different sizes of fasteners, pretension elements can be used compared to thermal load approach for simulating each size of fastener. This paper covers the details of analyses carried out simulating the preload through various options viz., preload through thermal, initial state command and pretension element etc. using ANSYS finite element package.

The Integration of Study and Work-Integrated Learning Experience through the Sequential, Embedded Completion of Tertiary Qualifications

ERIC Educational Resources Information Center

Whannell, Patricia; Humphries, Judy; Whannell, Robert; Usher, Kim

2015-01-01

A number of different models have been developed to integrate both Vocational Education and Training (VET) and university study with a view to producing work-ready graduates. This paper describes one joint initiative which allows students to integrate their theoretical study and work-integrated learning (WIL) experience by supporting a sequential,…

Healthy Watersheds Integrated Assessments Workshop Proceedings

EPA Science Inventory

The Healthy Watershed Integrated Assessment Workshop was held in Estes Park, Colorado in November 2010. Attendees were selected to represent interests and expertise of EPA’s Office of Water, EPA’s Office of Research and Development, EPA Regions, States, other Federal, State, and...

False ankylosis of the temporomandibular joint in a cat. Correction by partial zygomatic arch resection.

PubMed

Larguier, L; Jamet, N

2015-01-01

To describe the use of two-dimensional computer-assisted tomography (CT) with three-dimensional (3D) reconstruction in the diagnosis and planning of surgical treatment of a case of false ankylosis of the temporomandibular joint. A young European Shorthaired cat was presented with the complaint of inability to eat and open its jaws. A CT scan with 3D reconstruction allowed visualization of the lesion which was causing extra-articular ankylosis of the temporomandibular joint. Surgery was performed to resect an osseous lesion of the zygomatic arch, thus freeing the temporomandibular joint. Postoperative physical therapy was initiated immediately following surgery, and then carried out by the owner with a one year follow-up. Clinical examination of the cat was performed during regular office visits (at 1 month and 3 months following surgery), which allowed objective assessment of postoperative recuperation. At the end of a year, the owners reported that the cat had maintained sufficient jaw opening without any signs consistent with chronic pain. Computed tomography scan with 3D reconstruction allowed planning of the surgical correction of extra-articular ankylosis of the temporomandibular joint, and in this case condylectomy was avoided, since temporomandibular joint range-of-motion was maintained.

75 FR 2549 - Office of Biotechnology Activities; Office of Science Policy; Office of the Director; Notice of a...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-01-15

... DEPARTMENT OF HEALTH AND HUMAN SERVICES National Institutes of Health Office of Biotechnology Activities; Office of Science Policy; Office of the Director; Notice of a Meeting of the NIH Blue Ribbon... Coordinator, Office of Biotechnology Activities, Office of Science Policy, Office of the Director, National...

Load environment of rail joint bars : phase III : assessment of the effects of installation and maintenance practices

DOT National Transportation Integrated Search

2015-08-01

A series of tests, aimed at assessing the structural integrity of joint bars under differing service conditions, were conducted to address concerns regarding joint bar failures in the revenue service environment. Data collected through the course of ...

Joint Attention, Social-Cognition, and Recognition Memory in Adults

PubMed Central

Kim, Kwanguk; Mundy, Peter

2012-01-01

The early emerging capacity for Joint Attention (JA), or socially coordinated visual attention, is thought to be integral to the development of social-cognition in childhood. Recent studies have also begun to suggest that JA affects adult cognition as well, but methodological limitations hamper research on this topic. To address this issue we developed a novel virtual reality paradigm that integrates eye-tracking and virtual avatar technology to measure two types of JA in adults, Initiating Joint Attention (IJA) and Responding to Joint Attention (RJA). Distinguishing these types of JA in research is important because they are thought to reflect unique, as well as common constellations of processes involved in human social-cognition and social learning. We tested the validity of the differentiation of IJA and RJA in our paradigm in two studies of picture recognition memory in undergraduate students. Study 1 indicated that young adults correctly identified more pictures they had previously viewed in an IJA condition (67%) than in a RJA (58%) condition, η2 = 0.57. Study 2 controlled for IJA and RJA stimulus viewing time differences, and replicated the findings of Study 1. The implications of these results for the validity of the paradigm and research on the affects of JA on adult social-cognition are discussed. PMID:22712011

Cultural Momentum: The Impact of Agency on Foreign Area Officer Support to the Geographic Combatant Commands

DTIC Science & Technology

2015-06-01

extensive and highly successful military careers started in this personal and professional relationship, directly contributing to the humanitarian aid and...The Navy program, started in 2005, follows the Army’s single-track model for language- enabled officers. The Marine Corps’ program pre-dates the...adheres to its institutional personality against minimalist Joint FAO Program requirements. Before delving into the cases

Office worker response to an automated venetian blind and electric lighting system: A pilot study

DOE Office of Scientific and Technical Information (OSTI.GOV)

Vine, E.; Lee, E.; Clear, R.

1998-03-01

A prototype integrated, dynamic building envelope and lighting system designed to optimize daylight admission and solar heat gain rejection on a real-time basis in a commercial office building is evaluated. Office worker response to the system and occupant-based modifications to the control system are investigated to determine if the design and operation of the prototype system can be improved. Key findings from the study are: (1) the prototype integrated envelope and lighting system is ready for field testing, (2) most office workers (N=14) were satisfied with the system, and (3) there were few complaints. Additional studies are needed to explainmore » how illuminance distribution, lighting quality, and room design can affect workplans illuminance preferences.« less

Self-Referenced Processing, Neurodevelopment and Joint Attention in Autism

ERIC Educational Resources Information Center

Mundy, Peter; Gwaltney, Mary; Henderson, Heather

2010-01-01

This article describes a parallel and distributed processing model (PDPM) of joint attention, self-referenced processing and autism. According to this model, autism involves early impairments in the capacity for rapid, integrated processing of self-referenced (proprioceptive and interoceptive) and other-referenced (exteroceptive) information.…

UK science press officers, professional vision and the generation of expectations

PubMed Central

Samuel, Gabrielle; Williams, Clare; Gardner, John

2015-01-01

Science press officers can play an integral role in helping promote expectations and hype about biomedical research. Using this as a starting point, this article draws on interviews with 10 UK-based science press officers, which explored how they view their role as science reporters and as generators of expectations. Using Goodwin’s notion of ‘professional vision’, we argue that science press officers have a specific professional vision that shapes how they produce biomedical press releases, engage in promotion of biomedical research and make sense of hype. We discuss how these insights can contribute to the sociology of expectations, as well as inform responsible science communication. PMID:26265709

Building integrated semi-transparent photovoltaics: energy and daylighting performance

NASA Astrophysics Data System (ADS)

Kapsis, Konstantinos; Athienitis, Andreas K.

2011-08-01

This paper focuses on modeling and evaluation of semi-transparent photovoltaic technologies integrated into a coolingdominated office building façade by employing the concept of three-section façade. An energy simulation model is developed, using building simulation software, to investigate the effect of semi-transparent photovoltaic transmittance on the energy performance of an office in a typical office building in Montreal. The analysis is performed for five major façade orientations and two façade configurations. Using semi-transparent photovoltaic integrated into the office façade, electricity savings of up to 53.1% can be achieved compared to a typical office equipped with double glazing with Argon filling and a low emissivity coating, and lighting controlled based on occupancy and daylight levels.e.c

Degenerative joint disease: multiple joint involvement in young and mature dogs.

PubMed

Olsewski, J M; Lust, G; Rendano, V T; Summers, B A

1983-07-01

Radiologic, pathologic, and ancillary methods were used to determine the occurrence of degenerative joint disease involving multiple joints of immature and adult dogs. Animals were selected for the development of hip joint dysplasia and chronic degenerative joint disease. Of disease-prone dogs, 82% (45 of 55 dogs) had radiologic changes, indicative of hip dysplasia, by 1 year of age. At necropsy, more abnormal joints were identified than by radiographic examination. Among 92 dogs between 3 to 11 months of age that had joint abnormalities, 71% had hip joint involvement; 38%, shoulder joint involvement; 22%, stifle joint involvement; and 40% had multiple joint involvement. Polyarthritis was asymptomatic and unexpected. Radiographic examination of older dogs also revealed evidence of degenerative joint disease in many joints. Multiple joint involvement was substantiated at necropsy of young and mature dogs. A similar pattern of polyarticular osteoarthritis was revealed in a survey (computer search) of necropsy reports from medical case records of 100 adult and elderly dogs. Usually, the joint disease was an incidental observation, unrelated to the clinical disease or to the cause of death. The frequent occurrence of degenerative changes in several joints of dogs aged 6 months to 17 years indicated that osteoarthritis may be progressive in these joints and raises the possibility that systemic factors are involved in the disease process.

Statistical Methods in Integrative Genomics

PubMed Central

Richardson, Sylvia; Tseng, George C.; Sun, Wei

2016-01-01

Statistical methods in integrative genomics aim to answer important biology questions by jointly analyzing multiple types of genomic data (vertical integration) or aggregating the same type of data across multiple studies (horizontal integration). In this article, we introduce different types of genomic data and data resources, and then review statistical methods of integrative genomics, with emphasis on the motivation and rationale of these methods. We conclude with some summary points and future research directions. PMID:27482531

Experimental investigation on frequency shifting of imperfect adhesively bonded pipe joints

NASA Astrophysics Data System (ADS)

Haiyam, F. N.; Hilmy, I.; Sulaeman, E.; Firdaus, T.; Adesta, E. Y. T.

2018-01-01

Inspection tests for any manufactured structure are compulsory in order to detect the existence of damage.It is to ensure the product integrity, reliability and to avoid further catastrophic failure. In this research, modal analysis was utilized to detect structural damage as one of the Non Destructive Testing (NDT) methods. Comparing the vibration signal of a healthy structure with a non-healthy signal was performed. A modal analysis of an adhesively bonded pipe joint was investigated with a healthy joint as a reference. The damage joint was engineered by inserting a nylon fiber, which act as an impurity at adhesive region. The impact test using hammer was utilized in this research. Identification of shifting frequency of a free supported and clamped pipe joint was performed.It was found that shifting frequency occurred to the lower side by 5%.

Determination of Parachute Joint Factors using Seam and Joint Testing

NASA Technical Reports Server (NTRS)

Mollmann, Catherine

2015-01-01

This paper details the methodology for determining the joint factor for all parachute components. This method has been successfully implemented on the Capsule Parachute Assembly System (CPAS) for the NASA Orion crew module for use in determining the margin of safety for each component under peak loads. Also discussed are concepts behind the joint factor and what drives the loss of material strength at joints. The joint factor is defined as a "loss in joint strength...relative to the basic material strength" that occurs when "textiles are connected to each other or to metals." During the CPAS engineering development phase, a conservative joint factor of 0.80 was assumed for each parachute component. In order to refine this factor and eliminate excess conservatism, a seam and joint testing program was implemented as part of the structural validation. This method split each of the parachute structural joints into discrete tensile tests designed to duplicate the loading of each joint. Breaking strength data collected from destructive pull testing was then used to calculate the joint factor in the form of an efficiency. Joint efficiency is the percentage of the base material strength that remains after degradation due to sewing or interaction with other components; it is used interchangeably with joint factor in this paper. Parachute materials vary in type-mainly cord, tape, webbing, and cloth -which require different test fixtures and joint sample construction methods. This paper defines guidelines for designing and testing samples based on materials and test goals. Using the test methodology and analysis approach detailed in this paper, the minimum joint factor for each parachute component can be formulated. The joint factors can then be used to calculate the design factor and margin of safety for that component, a critical part of the design verification process.

Spacesuit mobility joints

NASA Technical Reports Server (NTRS)

Vykukal, H. C. (Inventor)

1978-01-01

Joints for use in interconnecting adjacent segments of an hermetically sealed spacesuit which have low torques, low leakage and a high degree of reliability are described. Each of the joints is a special purpose joint characterized by substantially constant volume and low torque characteristics. Linkages which restrain the joint from longitudinal distension and a flexible, substantially impermeable diaphragm of tubular configuration spanning the distance between pivotally supported annuli are featured. The diaphragms of selected joints include rolling convolutions for balancing the joints, while various joints include wedge-shaped sections which enhance the range of motion for the joints.

75 FR 15713 - Office of Biotechnology Activities; Office of Science Policy; Office of the Director; Notice of a...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-03-30

... DEPARTMENT OF HEALTH AND HUMAN SERVICES National Institutes of Health Office of Biotechnology Activities; Office of Science Policy; Office of the Director; Notice of a Meeting of the NIH Blue Ribbon... Lewallen, Advisory Committee Coordinator, Office of Biotechnology Activities, Office of Science Policy...

Utilization of integrated Michaelis-Menten equations for enzyme inhibition diagnosis and determination of kinetic constants using Solver supplement of Microsoft Office Excel.

PubMed

Bezerra, Rui M F; Fraga, Irene; Dias, Albino A

2013-01-01

Enzyme kinetic parameters are usually determined from initial rates nevertheless, laboratory instruments only measure substrate or product concentration versus reaction time (progress curves). To overcome this problem we present a methodology which uses integrated models based on Michaelis-Menten equation. The most severe practical limitation of progress curve analysis occurs when the enzyme shows a loss of activity under the chosen assay conditions. To avoid this problem it is possible to work with the same experimental points utilized for initial rates determination. This methodology is illustrated by the use of integrated kinetic equations with the well-known reaction catalyzed by alkaline phosphatase enzyme. In this work nonlinear regression was performed with the Solver supplement (Microsoft Office Excel). It is easy to work with and track graphically the convergence of SSE (sum of square errors). The diagnosis of enzyme inhibition was performed according to Akaike information criterion. Copyright © 2012 Elsevier Ireland Ltd. All rights reserved.

Infant joint attention, neural networks and social cognition.

PubMed

Mundy, Peter; Jarrold, William

2010-01-01

Neural network models of attention can provide a unifying approach to the study of human cognitive and emotional development (Posner & Rothbart, 2007). In this paper we argue that a neural network approach to the infant development of joint attention can inform our understanding of the nature of human social learning, symbolic thought process and social cognition. At its most basic, joint attention involves the capacity to coordinate one's own visual attention with that of another person. We propose that joint attention development involves increments in the capacity to engage in simultaneous or parallel processing of information about one's own attention and the attention of other people. Infant practice with joint attention is both a consequence and an organizer of the development of a distributed and integrated brain network involving frontal and parietal cortical systems. This executive distributed network first serves to regulate the capacity of infants to respond to and direct the overt behavior of other people in order to share experience with others through the social coordination of visual attention. In this paper we describe this parallel and distributed neural network model of joint attention development and discuss two hypotheses that stem from this model. One is that activation of this distributed network during coordinated attention enhances the depth of information processing and encoding beginning in the first year of life. We also propose that with development, joint attention becomes internalized as the capacity to socially coordinate mental attention to internal representations. As this occurs the executive joint attention network makes vital contributions to the development of human symbolic thinking and social cognition. Copyright © 2010 Elsevier Ltd. All rights reserved.

Infant Joint Attention, Neural Networks and Social Cognition

PubMed Central

Mundy, Peter; Jarrold, William

2010-01-01

Neural network models of attention can provide a unifying approach to the study of human cognitive and emotional development (Posner & Rothbart, 2007). This paper we argue that a neural networks approach to the infant development of joint attention can inform our understanding of the nature of human social learning, symbolic thought process and social cognition. At its most basic, joint attention involves the capacity to coordinate one’s own visual attention with that of another person. We propose that joint attention development involves increments in the capacity to engage in simultaneous or parallel processing of information about one’s own attention and the attention of other people. Infant practice with joint attention is both a consequence and organizer of the development of a distributed and integrated brain network involving frontal and parietal cortical systems. This executive distributed network first serves to regulate the capacity of infants to respond to and direct the overt behavior of other people in order to share experience with others through the social coordination of visual attention. In this paper we describe this parallel and distributed neural network model of joint attention development and discuss two hypotheses that stem from this model. One is that activation of this distributed network during coordinated attention enhances to depth of information processing and encoding beginning in the first year of life. We also propose that with development joint attention becomes internalized as the capacity to socially coordinate mental attention to internal representations. As this occurs the executive joint attention network makes vital contributions to the development of human symbolic thinking and social cognition. PMID:20884172

6. Interior, rear offices: operations assistant office looking north toward ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

6. Interior, rear offices: operations assistant office looking north toward security operations officer's office. - Ellsworth Air Force Base, Rushmore Air Force Station, Security Central Control Building, Quesada Drive, Blackhawk, Meade County, SD

75 FR 10293 - Office of Biotechnology Activities; Office of Science Policy; Office of the Director; Notice of a...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-03-05

... DEPARTMENT OF HEALTH AND HUMAN SERVICES National Institutes of Health Office of Biotechnology Activities; Office of Science Policy; Office of the Director; Notice of a Meeting of the NIH Blue Ribbon... Activities, Office of Science Policy, Office of the Director, National Institutes of Health, 6705 Rockledge...

49 CFR 800.25 - Delegation to the Directors of Office of Aviation Safety, Office of Railroad Safety, Office of...

Code of Federal Regulations, 2012 CFR

2012-10-01

... 49 Transportation 7 2012-10-01 2012-10-01 false Delegation to the Directors of Office of Aviation... Office of Aviation Safety, Office of Railroad Safety, Office of Highway Safety, Office of Marine Safety... Offices of Aviation, Railroad, Highway, Marine, and Pipeline and Hazardous Materials Safety, the authority...

49 CFR 800.25 - Delegation to the Directors of Office of Aviation Safety, Office of Railroad Safety, Office of...

Code of Federal Regulations, 2014 CFR

2014-10-01

... 49 Transportation 7 2014-10-01 2014-10-01 false Delegation to the Directors of Office of Aviation... Office of Aviation Safety, Office of Railroad Safety, Office of Highway Safety, Office of Marine Safety... Offices of Aviation, Railroad, Highway, Marine, and Pipeline and Hazardous Materials Safety, the authority...

49 CFR 800.25 - Delegation to the Directors of Office of Aviation Safety, Office of Railroad Safety, Office of...

Code of Federal Regulations, 2013 CFR

2013-10-01

... 49 Transportation 7 2013-10-01 2013-10-01 false Delegation to the Directors of Office of Aviation... Office of Aviation Safety, Office of Railroad Safety, Office of Highway Safety, Office of Marine Safety... Offices of Aviation, Railroad, Highway, Marine, and Pipeline and Hazardous Materials Safety, the authority...

49 CFR 800.25 - Delegation to the Directors of Office of Aviation Safety, Office of Railroad Safety, Office of...

Code of Federal Regulations, 2011 CFR

2011-10-01

... 49 Transportation 7 2011-10-01 2011-10-01 false Delegation to the Directors of Office of Aviation... Office of Aviation Safety, Office of Railroad Safety, Office of Highway Safety, Office of Marine Safety... Offices of Aviation, Railroad, Highway, Marine, and Pipeline and Hazardous Materials Safety, the authority...

49 CFR 800.25 - Delegation to the Directors of Office of Aviation Safety, Office of Railroad Safety, Office of...

Code of Federal Regulations, 2010 CFR

2010-10-01

... Office of Aviation Safety, Office of Railroad Safety, Office of Highway Safety, Office of Marine Safety... Offices of Aviation, Railroad, Highway, Marine, and Pipeline and Hazardous Materials Safety, the authority... 49 Transportation 7 2010-10-01 2010-10-01 false Delegation to the Directors of Office of Aviation...

INTEGRATED COASTAL MONITORING PROGRAM FOR THE GULF OF MEXICO

EPA Science Inventory

The Gulf of Mexico Program (GMP) Office in cooperation with Gulf State agencies, EPA Regions 4 and 6, EPA's Office of Water and Office of Research and Development (ORD), and the GMP principal partners are developing an integrated coastal monitoring program for the Gulf of Mexico....

Conception of a cost accounting model for doctors' offices.

PubMed

Britzelmaier, Bernd; Eller, Brigitte

2004-01-01

Physicians are required, due to economical, financial, competitive, demographical and market-induced framework conditions, to pay increasing attention to the entrepreneurial administration of their offices. Because of restructuring policies throughout the public health system--on the grounds of increasing financing problems--more and better transparency of costs will be indispensable in all fields of medical activities in the future. The more cost-conscious public health insurance institutions or other public health funds will need professional cost accounting systems, which will provide, for minimum maintenance expense, standardised basis cost information as a device for decision. The conception of cost accounting for doctors' offices presented in this paper shows an integrated cost accounting approach based on activity and marginal costing philosophy. The conception presented provides a suitable basis for the development of standard software for cost accounting systems for doctors' offices.

10 CFR 1.39 - Office of the Chief Human Capital Officer.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 10 Energy 1 2014-01-01 2014-01-01 false Office of the Chief Human Capital Officer. 1.39 Section 1... Headquarters Staff Offices § 1.39 Office of the Chief Human Capital Officer. The Office of the Chief Human... effective organization, utilization, and development of the agency's human resources; (b) Provides labor...

Experiences of Women of Color University Chief Diversity Officers

ERIC Educational Resources Information Center

Nixon, Monica L.

2017-01-01

Contemporary models of operationalizing diversity on college campuses focus on the integration of diversity goals with the overall educational mission in ways that maximize the benefits of diversity for all. A growing number of institutions have created chief diversity officer (CDO) positions to procedurally and symbolically centralize diversity…

U.S. Department of Education, Office of Inspector General Semiannual Report to Congress, October 1, 2000-March 31, 2001.

ERIC Educational Resources Information Center

Office of Inspector General (ED), Washington, DC.

The Office of Inspector General responded to a joint request by the House and Senate to update them on its audit, investigation, and inspection efforts on the most significant challenges facing the Department of Education for the October 1, 2000 to March 31, 2001 period. These challenges include improving financial management; improving the…

Integral abutment bridge for Louisiana's soft and stiff soils.

DOT National Transportation Integrated Search

2016-03-01

Integral abutment bridges (IABs) have been designed and constructed in a few US states in the past few : decades. The initial purpose of building such bridges was to eliminate the expansion joints and resolve the : joint-induced problems. Although IA...

MSFC Advanced Concepts Office and the Iterative Launch Vehicle Concept Method

NASA Technical Reports Server (NTRS)

Creech, Dennis

2011-01-01

This slide presentation reviews the work of the Advanced Concepts Office (ACO) at Marshall Space Flight Center (MSFC) with particular emphasis on the method used to model launch vehicles using INTegrated ROcket Sizing (INTROS), a modeling system that assists in establishing the launch concept design, and stage sizing, and facilitates the integration of exterior analytic efforts, vehicle architecture studies, and technology and system trades and parameter sensitivities.

Measuring integrated care.

PubMed

Strandberg-Larsen, Martin

2011-02-01

The positive outcomes of coordination of healthcare services are to an increasing extent becoming clear. However the complexity of the field is an inhibiting factor for vigorously designed trial studies. Conceptual clarity and a consistent theoretical frame-work are thus needed. While researchers respond to these needs, patients and providers face the multiple challenges of today's healthcare environment. Decision makers, planners and managers need evidence based policy options and information on the scope of the integrated care challenges they are facing. The US managed care organization Kaiser Permanente has been put forward as an example for European healthcare systems to follow, although the evidence base is far from conclusive. The thesis has five objectives: 1) To contribute to the understanding of the concept of integration in healthcare systems and to identify measurement methods to capture the multi-dimensional aspects of integrated healthcare delivery. 2) To assess the level of integration of the Danish healthcare system. 3) To assess the use of joint health plans as a tool for coordination between the regional and local level in the Danish healthcare system. 4) To compare the inputs and performance of the Danish healthcare system and the managed care organization Kaiser Permanente, California, US. 5) To compare primary care clinicians' perception of clinical integration in two healthcare systems: Kaiser Permanente, Northern California and the Danish healthcare system. Further to examine the associations between specific organizational factors and clinical integration within each system. The literature was systematically searched to identify methods for measurement of integrated healthcare delivery. A national cross-sectional survey was conducted among major professional stake-holders at five different levels of the Danish healthcare system. The survey data were used to allow for analysis of the level of integration achieved. Data from the survey were

Graduate Diversity Officers and Efforts to Retain Students of Color

ERIC Educational Resources Information Center

Griffin, Kimberly A.; Muniz, Marcela; Smith, Edward J.

2016-01-01

This qualitative study explores how 14 institutional agents (graduate diversity officers or GDOs) work towards improving retention for graduate students of Color. Consistent with Lovitt's framework of graduate student retention, findings reveal GDOs implement diverse strategies that promote opportunities for academic integration, social…

The Challenges of Integrating NASA's Human, Budget, and Data Capital within the Constellation Program's Exploration Launch Projects Office

NASA Technical Reports Server (NTRS)

Kidd, Luanne; Morris, Kenneth B.; Self, Timothy A.

2007-01-01

The U.S. Vision for Space Exploration directs NASA to retire the Space Shuttle in 2010 and replace it with safe, reliable, and cost-effective space transportation systems for crew and cargo travel to the Moon, Mars, and beyond. Such emerging space transportation initiatives face massive organizational challenges, including building and nurturing an experienced, dedicated team with the right skills for the required tasks; allocating and tracking the fiscal capital invested in achieving technical progress against an integrated master schedule; and turning generated data into useful knowledge that equips the team to design and develop superior products for customers and stakeholders. It has been more than 30 years since the Space Shuttle was designed; therefore, the current aerospace workforce has limited experience with developing new designs for human-rated spaceflight hardware. To accomplish these activities, NASA is using a wide range of state-of-the-art information technology tools that connect its diverse, decentralized teams and provide timely, accurate information for decision makers. In addition, business professionals are assisting technical managers with planning, tracking, and forecasting resource use against an integrated master schedule that horizontally and vertically interlinks hardware elements and milestone events. Furthermore, NASA is employing a wide variety of strategies to ensure that it has the motivated and qualified staff it needs for the tasks ahead. This paper discusses how NASA's Exploration Launch Projects Office, which is responsible for delivering these new launch vehicles, integrates its resources to create an engineering business environment that promotes mission success, which is defined by replacing the Space Shuttle by 2014 and returning to the Moon by 2020.

Biochemical and biomechanical characterisation of equine cervical facet joint cartilage.

PubMed

O'Leary, S A; White, J L; Hu, J C; Athanasiou, K A

2018-04-15

The equine cervical facet joint is a site of significant pathology. Located bilaterally on the dorsal spine, these diarthrodial joints work in conjunction with the intervertebral disc to facilitate appropriate spinal motion. Despite the high prevalence of pathology in this joint, the facet joint is understudied and thus lacking in viable treatment options. The goal of this study was to characterise equine facet joint cartilage and provide a comprehensive database describing the morphological, histological, biochemical and biomechanical properties of this tissue. Descriptive cadaver studies. A total of 132 facet joint surfaces were harvested from the cervical spines of six skeletally mature horses (11 surfaces per animal) for compiling biomechanical and biochemical properties of hyaline cartilage of the equine cervical facet joints. Gross morphometric measurements and histological staining were performed on facet joint cartilage. Creep indentation and uniaxial strain-to-failure testing were used to determine the biomechanical compressive and tensile properties. Biochemical assays included quantification of total collagen, sulfated glycosaminoglycan and DNA content. The facet joint surfaces were ovoid in shape with a flat articular surface. Histological analyses highlighted structures akin to articular cartilage of other synovial joints. In general, biomechanical and biochemical properties did not differ significantly between the inferior and superior joint surfaces as well as among spinal levels. Interestingly, compressive and tensile properties of cervical facet articular cartilage were lower than those of articular cartilage from other previously characterised equine joints. Removal of the superficial zone reduced the tissue's tensile strength, suggesting that this zone is important for the tensile integrity of the tissue. Facet surfaces were sampled at a single, central location and do not capture the potential topographic variation in cartilage properties. This

The Army Civil Affairs Officer Educational Pipeline: A Supply and Demand Analysis

DTIC Science & Technology

2008-12-01

trust by working with the local government or community to provide these services. This will placate the population and enhance the legitimacy of the...security and control, the U.S. and its allies could prevent or locate hostile threats before they cause harm. Improving the quality of life ...leery of contact with foreigners and CA officers will need a delicate touch. CA officers can integrate extremist groups by working with leaders to focus

Adhesive Characterization and Progressive Damage Analysis of Bonded Composite Joints

NASA Technical Reports Server (NTRS)

Girolamo, Donato; Davila, Carlos G.; Leone, Frank A.; Lin, Shih-Yung

2014-01-01

The results of an experimental/numerical campaign aimed to develop progressive damage analysis (PDA) tools for predicting the strength of a composite bonded joint under tensile loads are presented. The PDA is based on continuum damage mechanics (CDM) to account for intralaminar damage, and cohesive laws to account for interlaminar and adhesive damage. The adhesive response is characterized using standard fracture specimens and digital image correlation (DIC). The displacement fields measured by DIC are used to calculate the J-integrals, from which the associated cohesive laws of the structural adhesive can be derived. A finite element model of a sandwich conventional splice joint (CSJ) under tensile loads was developed. The simulations indicate that the model is capable of predicting the interactions of damage modes that lead to the failure of the joint.

Office of the Chief Financial Officer Annual Report 2009

DOE Office of Scientific and Technical Information (OSTI.GOV)

Fernandez, Jeffrey

2009-12-15

Presented is the 2009 Chief Financial Officer's Annual Report. The data included in this report has been compiled from the Budget Office, the Controller, Procurement and Property Management and the Sponsored Projects Office.

Joint Test Protocol for Validation of Alternative Low-Emission Surface Preparation/Depainting Technologies for Structural Steel

NASA Technical Reports Server (NTRS)

Lewis, Pattie

2005-01-01

Headquarters National Aeronautics and Space Administration (NASA) chartered the Acquisition Pollution Prevention (AP2) Office to coordinate agency activities affecting pollution prevention issues identified during system and component acquisition and sustainment processes. The primary objectives of the AP2 Office are to: (1) Reduce or eliminate the use of hazardous materials (HazMats) or hazardous processes at manufacturing, remanufacturing, and sustainment locations. (2) A void duplication of effort in actions required to reduce or eliminate HazMats through joint center cooperation and technology sharing. This project will identify, evaluate and approve alternative surface preparation technologies for use at NASA and Air Force Space Command (AFSPC) installations. Materials and processes will be evaluated with the goal of selecting those processes that will improve corrosion protection at critical systems, facilitate easier maintenance activity, extend maintenance cycles, eliminate flight hardware contamination and reduce the amount of hazardous waste generated. This Joint Test Protocol (JTP) contains the critical requirements and tests necessary to qualify alternative Low-Emission Surface Preparation/Depainting Technologies for Structural Steel Applications. These tests were derived from engineering, performance, and operational impact (supportability) requirements defined by a consensus of NASA and Air Force Space Command (AFSPC) participants. The Field Test Plan (FTP), entitled Joint Test Protocol for Validation of Alternative Low Emission Surface Preparation/Depainting Technologies for Structural Steel, prepared by ITB, defines the field evaluation and testing requirements for validating alternative surface preparation/depainting technologies and supplements the JTP.

Periprosthetic joint infection: are patients with multiple prosthetic joints at risk?

PubMed

Jafari, S Mehdi; Casper, David S; Restrepo, Camilo; Zmistowski, Benjamin; Parvizi, Javad; Sharkey, Peter F

2012-06-01

Patients who present with a periprosthetic joint infection in a single joint may have multiple prosthetic joints. The risk of these patients developing a subsequent infection in another prosthetic joint is unknown. Our purposes were (1) to identify the risk of developing a subsequent infection in another prosthetic joint and (2) to describe the time span and organism profile to the second prosthetic infection. We retrospectively identified 55 patients with periprosthetic joint infection who had another prosthetic joint in place at the time of presentation. Of the 55 patients, 11 (20%) developed a periprosthetic joint infection in a second joint. The type of organism was the same as the first infection in 4 (36%) of 11 patients. The time to developing a second infection averaged 2.0 years (range, 0-6.9 years). Copyright © 2012 Elsevier Inc. All rights reserved.

"Breaking the chain of poverty": family planning, community involvement, and the Population Council-Office of Economic Opportunity alliance.

PubMed

Nelson, Jennifer

2014-01-01

The Office of Economic Opportunity-Population Council program is an example of a mid-twentieth-century federal government/private foundation cooperative effort to place family planning and maternal health at the center of a fight against entrenched poverty. These joint efforts were the trend in family planning and maternal health provision by the 1960s and had two overlapping but also contradictory goals. The first was to provide contraceptive services to poor women to reduce the numbers of poor children, thus relieving the poor of added mouths to feed. Popular fears of a population explosion, mounting welfare rolls, and an increase in the numbers of African Americans receiving welfare fueled this goal. The second aim, however, was to expand comprehensive maternal health services to help reduce poverty by increasing poor women's involvement in and control over the health institutions that could have significant impact on their lives. While the first goal pivoted on encouraging poor women to bear fewer children, the second sought to integrate poor women into community healthcare delivery systems.

NASA's Astronant Family Support Office

NASA Technical Reports Server (NTRS)

Beven, Gary; Curtis, Kelly D.; Holland, Al W.; Sipes, Walter; VanderArk, Steve

2014-01-01

During the NASA-Mir program of the 1990s and due to the challenges inherent in the International Space Station training schedule and operations tempo, it was clear that a special focus on supporting families was a key to overall mission success for the ISS crewmembers pre-, in- and post-flight. To that end, in January 2001 the first Family Services Coordinator was hired by the Behavioral Health and Performance group at NASA JSC and matrixed from Medical Operations into the Astronaut Office's organization. The initial roles and responsibilities were driven by critical needs, including facilitating family communication during training deployments, providing mission-specific and other relevant trainings for spouses, serving as liaison for families with NASA organizations such as Medical Operations, NASA management and the Astronaut Office, and providing assistance to ensure success of an Astronaut Spouses Group. The role of the Family Support Office (FSO) has modified as the ISS Program matured and the needs of families changed. The FSO is currently an integral part of the Astronaut Office's ISS Operations Branch. It still serves the critical function of providing information to families, as well as being the primary contact for US and international partner families with resources at JSC. Since crews launch and return on Russian vehicles, the FSO has the added responsibility for coordinating with Flight Crew Operations, the families, and their guests for Soyuz launches, landings, and Direct Return to Houston post-flight. This presentation will provide a summary of the family support services provided for astronauts, and how they have changed with the Program and families the FSO serves. Considerations for future FSO services will be discussed briefly as NASA proposes one year missions and beyond ISS missions. Learning Objective: 1) Obtain an understanding of the reasons a Family Support Office was important for NASA. 2) Become familiar with the services provided for

Cyber Power for the Joint Force Commander: An Operational Design Framework

DTIC Science & Technology

2014-03-26

William A. Owens, Kenneth W. Dam, and Herbert S. Lin, eds, Technology, Policy, Law, and Ethics Regarding U.S. Acquisition and Use of Cyberattack...and computer systems used in carrying out a mission.” 27 George J. Franz III, "Effective Synchronization and Integration of Effects Through...2007. Franz, George J. "Effective Synchronization and Integration of Effects Through Cyberspace for the Joint Warfighter." U.S. Cyber Command

On the role of correctional officers in prison mental health.

PubMed

Dvoskin, Joel A; Spiers, Erin M

2004-01-01

This article discusses the role of correctional line staff in treatment of prison inmates with serious mental illness. The authors assert that many roles and duties traditionally attributed to clinicians can and often should be performed not only by mental health professionals, but by line staff such as correctional officers and nurses. Moreover, the optimal climate for effective treatment is one in which mental health professionals and line staff work collaboratively, especially since line staff alone are in contact with inmates 24 hours per day. The specific activities which comprise mental health treatment in prison are described as: 1) counseling and psychotherapy-talking with inmates, 2) consultation-talking about inmates, 3) special housing, activities, and behavioral programs, and 4) medication. Case examples demonstrate how correctional officers, nurses, and other line staff perform each of these activities. Recognition and nurturance of these activities will improve the quality of services and reduce stress on staff and inmates alike. Consultation with line staff, joint training, and use of multi-disciplinary treatment teams are advocated as methods of reaching these goals.

Getting out of the Office and into the Classroom

ERIC Educational Resources Information Center

Parkhurst, Kathleen J.

2009-01-01

New principals are enthusiastic about fulfilling the role of educational leader. They envision themselves visiting classrooms frequently and becoming integrally involved in curriculum and instruction. But it is not long before reality sets in. Principals learn very early that there is a constant struggle between the demands of the office and the…

A Firsthand Comparison of a System Office to a College Office

ERIC Educational Resources Information Center

Hom, Willard C.

2010-01-01

System offices for community college institutional research differ in many ways from campus offices for community college institutional research. The other chapters in this volume describe salient characteristics of system IR offices, but many readers may want to see a direct comparison of system IR offices to campus IR offices in the community…

Integrating Civilian Agencies in Stability Operations

DTIC Science & Technology

2009-01-01

Defense for Policy, COL Norman Cotton . At the Office of the Deputy Under Secretary of Defense for Readiness, Mr. Carl Rosengrant. At the U.S. Joint...rationale for pro- viding foreign aid was to help defeat Soviet-style communism by pro- moting economic development and political reforms that would...1990s, the U.S. government’s stated intent for allocating foreign aid was to achieve broad-based and sustainable economic growth, to pro- mote the

Joint Test Report for Validation of Alternative Low-Emission Surface Preparation/Depainting Technologies for Structural Steel

NASA Technical Reports Server (NTRS)

Lewis, Pattie

2007-01-01

Headquarters National Aeronautics and Space Administration (NASA) chartered the NASA Acquisition Pollution Prevention (AP2) Office to coordinate agency activities affecting pollution prevention issues identified during system and component acquisition and sustainment processes. The primary objectives of the AP2 Office are to: (1) Reduce or eliminate the use of hazardous materials or hazardous processes at manufacturing, remanufacturing, and sustainment locations. (2) Avoid duplication of effort in actions required to reduce or eliminate hazardous materials through joint center cooperation and technology sharing. The objective of this project was to qualify candidate alternative Low-Emission Surface Preparation/Depainting Technologies for Structural Steel applications at NASA facilities. This project compares the surface preparation/depainting performance of the proposed alternatives to existing surface preparation/depainting systems or standards. This Joint Test Report (JTR) contains the results of testing as per the outlines of the Joint Test Protocol (JTP), Joint Test Protocol for Validation of Alternative Low-Emission Surface Preparation/Depainting Technologies for Structural Steel, and the Field Test Plan (FTP), Field Evaluations Test Plan for Validation of Alternative Low-Emission Surface Preparation/Depainting Technologies for Structural Steel, for critical requirements and tests necessary to qualify alternatives for coating removal systems. These tests were derived from engineering, performance, and operational impact (supportability) requirements defined by a consensus of government and industry participants. This JTR documents the results of the testing as well as any test modifications made during the execution of the project. This JTR is made available as a reference for future pollution prevention endeavors by other NASA Centers, the Department of Defense and commercial users to minimize duplication of effort. The current coating removal processes

Evaluation of subsurface damage in concrete deck joints using impact echo method

DOE PAGES

Rickard, Larry; Choi, Wonchang

2016-01-01

Many factors can affect the overall performance and longevity of highway bridges, including the integrity of their deck joints. This study focuses on the evaluation of subsurface damage in deteriorated concrete deck joints, which includes the delamination and corrosion of the reinforcement. Impact echo and surface wave technology, mainly a portable seismic property analyzer (PSPA), were employed to evaluate the structural deficiency of concrete joints. Laboratory tests of core samples were conducted to verify the nondestructive test results. As a result, the primary advantage of the PSPA as a bridge assessment tool lies in its ability to assess the concrete’smore » modulus and to detect subsurface defects at a particular point simultaneously.« less

Impact extractive fracture of jointed steel plates of a bolted joint

NASA Astrophysics Data System (ADS)

Daimaruya, M.; Fujiki, H.; Ambarita, H.

2012-08-01

This study is concerned with the development of a fracture criterion for the impact fracture of jointed steel plates of a bolted joint used in a car body. For the accurate prediction of crash characteristics of car bodies by computer-aided engineering (CAE), it is also necessary to examine the behavior and fracture of jointed steel plates subjected to impact loads. Although the actual impact fracture of jointed steel plates of a bolted joint used in cars is complicated, for simplifying the problem it might be classified into the shear fracture and the extractive fracture of jointed steel plates. Attention is given to the extractive fracture of jointed steel plates in this study. The extractive behavior and fracture of three kinds of steel plates used for cars are examined in experiments and numerical simulations. The impact extraction test of steel plates jointed by a bolt is performed using the one-bar method, together with the static test. In order to understand the mechanism of extractive fracture process of jointed steel plates, numerical simulations by a FEM code LS-DYNA are also carried out. The obtained results suggest that a stress-based fracture criterion may be developed for the impact extractive fracture of jointed steel plates of a bolted joint used in a car body.

Great Expectations in the Joint Advanced Manufacturing Region

DTIC Science & Technology

2016-12-01

would be continuous experimentation and risk reduction prototyping. The entire manufacturing life cycle— design , testing, product development...on the back of a napkin, they decided to call their effort the Joint Advanced Manufacturing Region (JAMR) and manage it as an Integrated Product ... designed to support the continuous experimentation of advanced manufacturing tactics, tech- niques and procedures under actual operational or combat

75 FR 2542 - Science Advisory Board Staff Office Notification of a Public Meeting of the Science Advisory...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-01-15

... ENVIRONMENTAL PROTECTION AGENCY [FRL-9104-2] Science Advisory Board Staff Office Notification of a Public Meeting of the Science Advisory Board Committee on Science Integration for Decisionmaking AGENCY... Agency) Science Advisory Board (SAB) Staff Office announces a public meeting of the SAB Committee on...

75 FR 9895 - Science Advisory Board Staff Office; Notification of a Public Meeting of the Science Advisory...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-03-04

... ENVIRONMENTAL PROTECTION AGENCY [FRL-9122-2] Science Advisory Board Staff Office; Notification of a Public Meeting of the Science Advisory Board; Committee on Science Integration for Decision Making... Agency (EPA or Agency) Science Advisory Board (SAB) Staff Office announces a public meeting of the SAB...

Towards Scalable Strain Gauge-Based Joint Torque Sensors

PubMed Central

D’Imperio, Mariapaola; Cannella, Ferdinando; Caldwell, Darwin G.; Cuschieri, Alfred

2017-01-01

During recent decades, strain gauge-based joint torque sensors have been commonly used to provide high-fidelity torque measurements in robotics. Although measurement of joint torque/force is often required in engineering research and development, the gluing and wiring of strain gauges used as torque sensors pose difficulties during integration within the restricted space available in small joints. The problem is compounded by the need for a scalable geometric design to measure joint torque. In this communication, we describe a novel design of a strain gauge-based mono-axial torque sensor referred to as square-cut torque sensor (SCTS), the significant features of which are high degree of linearity, symmetry, and high scalability in terms of both size and measuring range. Most importantly, SCTS provides easy access for gluing and wiring of the strain gauges on sensor surface despite the limited available space. We demonstrated that the SCTS was better in terms of symmetry (clockwise and counterclockwise rotation) and more linear. These capabilities have been shown through finite element modeling (ANSYS) confirmed by observed data obtained by load testing experiments. The high performance of SCTS was confirmed by studies involving changes in size, material and/or wings width and thickness. Finally, we demonstrated that the SCTS can be successfully implementation inside the hip joints of miniaturized hydraulically actuated quadruped robot-MiniHyQ. This communication is based on work presented at the 18th International Conference on Climbing and Walking Robots (CLAWAR). PMID:28820446

Towards Scalable Strain Gauge-Based Joint Torque Sensors.

PubMed

Khan, Hamza; D'Imperio, Mariapaola; Cannella, Ferdinando; Caldwell, Darwin G; Cuschieri, Alfred; Semini, Claudio

2017-08-18

During recent decades, strain gauge-based joint torque sensors have been commonly used to provide high-fidelity torque measurements in robotics. Although measurement of joint torque/force is often required in engineering research and development, the gluing and wiring of strain gauges used as torque sensors pose difficulties during integration within the restricted space available in small joints. The problem is compounded by the need for a scalable geometric design to measure joint torque. In this communication, we describe a novel design of a strain gauge-based mono-axial torque sensor referred to as square-cut torque sensor (SCTS) , the significant features of which are high degree of linearity, symmetry, and high scalability in terms of both size and measuring range. Most importantly, SCTS provides easy access for gluing and wiring of the strain gauges on sensor surface despite the limited available space. We demonstrated that the SCTS was better in terms of symmetry (clockwise and counterclockwise rotation) and more linear. These capabilities have been shown through finite element modeling (ANSYS) confirmed by observed data obtained by load testing experiments. The high performance of SCTS was confirmed by studies involving changes in size, material and/or wings width and thickness. Finally, we demonstrated that the SCTS can be successfully implementation inside the hip joints of miniaturized hydraulically actuated quadruped robot- MiniHyQ . This communication is based on work presented at the 18th International Conference on Climbing and Walking Robots (CLAWAR).

10 CFR 1.5 - Location of principal offices and Regional Offices.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 10 Energy 1 2010-01-01 2010-01-01 false Location of principal offices and Regional Offices. 1.5 Section 1.5 Energy NUCLEAR REGULATORY COMMISSION STATEMENT OF ORGANIZATION AND GENERAL INFORMATION Introduction § 1.5 Location of principal offices and Regional Offices. (a) The principal NRC offices are located in the Washington, DC, area. Facilities...

Estimates of the Officer Force Structure Required to Man the Projected Naval Combatant Forces of the 1980s and 1990s.

DTIC Science & Technology

1980-10-01

Element, 64709N Prototype Manpower/Personnel Systems (U), Project Z1302-PN Officer Career Models (U), funded by the Office of the Deputy Assistant... Models for Navy Officer Billets portion of the proposed NPS research effort to develop an integrated officer system planning model ; the purpose of this...attempting to model the Naval officer force structure as a system. This study considers the primary first order factors which drive the requirements

77 FR 22843 - Information Collection Activities: Submission for the Office of Management and Budget (OMB...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-04-17

... use the information from the proposed telephone survey in decision making regarding integration of the...--17th Street NW., Washington, DC 20503, Attention: Desk Officer for Department of Transportation... and decisions are being made about best practices for integrating such technology into vehicles, NHTSA...

ISHKS joint registry: A preliminary report.

PubMed

Pachore, Jawahir A; Vaidya, Shrinand V; Thakkar, Chandrasekhar J; Bhalodia, Haresh Kumar P; Wakankar, Hemant M

2013-09-01

Total knee arthroplasty (TKA) and total hip arthroplasty (THA) are the most widely practiced surgical options for arthritis all over the world and its application is rising in India. Indian Society of Hip and Knee Surgeons (ISHKS) has established a joints registry and has been collecting data for last 6 years. All members of ISHKS are encouraged to actively participate in the registry. A simple two page knee and hip form can be downloaded from the website www.ishks.com. The information collected includes patient demographics, indication for surgery, implant details and in case of revision arthroplasty: the details of implants removed and the cause of failure of primary arthroplasty. These forms are mailed to the central registry office and the data is fed in computerized registry. Data collection started in October 2006. Joint registry is a very important initiative of ISHKS and till date, have data of 34,478 TKAs and 3604 THAs, contributed by 42 surgeons across India. Some important observations have emerged. Data of 34,478 TKAs was assessed: These included 8612 males (25%) and 25,866 females (75%). Average age was 64.4 years (Osteoarthritis range: 45 to 88 years; Rheumatoid arthritis range: 22 to 74 years). Average body mass index was 29.1 (Range: 18.1 to 42.9). The indication for TKA was osteoarthritis in 33,444 (97%) and rheumatoid arthritis in 759 (2.2%). Total of 3604 THA procedures were recorded. These included 2162 (60%) male patients and 1442 (40%) female patients. Average age was 52 years (Range 17 to 85 years) and average BMI was 25.8 (Range: 17.3 to 38.5). The indications for THA was AVN in 49%. The registry will become more meaningful in years to come. Active participation of all arthroplasty surgeons across India is vital for the success of the joints registry.

Joint Instability and Osteoarthritis

PubMed Central

Blalock, Darryl; Miller, Andrew; Tilley, Michael; Wang, Jinxi

2015-01-01

Joint instability creates a clinical and economic burden in the health care system. Injuries and disorders that directly damage the joint structure or lead to joint instability are highly associated with osteoarthritis (OA). Thus, understanding the physiology of joint stability and the mechanisms of joint instability-induced OA is of clinical significance. The first section of this review discusses the structure and function of major joint tissues, including periarticular muscles, which play a significant role in joint stability. Because the knee, ankle, and shoulder joints demonstrate a high incidence of ligament injury and joint instability, the second section summarizes the mechanisms of ligament injury-associated joint instability of these joints. The final section highlights the recent advances in the understanding of the mechanical and biological mechanisms of joint instability-induced OA. These advances may lead to new opportunities for clinical intervention in the prevention and early treatment of OA. PMID:25741184

Joint instability and osteoarthritis.

PubMed

Blalock, Darryl; Miller, Andrew; Tilley, Michael; Wang, Jinxi

2015-01-01

Joint instability creates a clinical and economic burden in the health care system. Injuries and disorders that directly damage the joint structure or lead to joint instability are highly associated with osteoarthritis (OA). Thus, understanding the physiology of joint stability and the mechanisms of joint instability-induced OA is of clinical significance. The first section of this review discusses the structure and function of major joint tissues, including periarticular muscles, which play a significant role in joint stability. Because the knee, ankle, and shoulder joints demonstrate a high incidence of ligament injury and joint instability, the second section summarizes the mechanisms of ligament injury-associated joint instability of these joints. The final section highlights the recent advances in the understanding of the mechanical and biological mechanisms of joint instability-induced OA. These advances may lead to new opportunities for clinical intervention in the prevention and early treatment of OA.

A novel hybrid joining methodology for composite to steel joints

NASA Astrophysics Data System (ADS)

Sarh, Bastian

This research has established a novel approach for designing, analyzing, and fabricating load bearing structural connections between resin infused composite materials and components made of steel or other metals or alloys. A design philosophy is proposed wherein overlapping joint sections comprised of fiber reinforced plastics (FRP's) and steel members are connected via a combination of adhesive bonding and integrally placed composite pins. A film adhesive is utilized, placed into the dry stack prior to resin infusion and is cured after infusion through either local heat elements or by placing the structure into an oven. The novel manner in which the composite pins are introduced consists of perforating the steel member with holes and placing pre-formed composite pins through them, also prior to resin infusion of the composite section. In this manner joints are co-molded structures such that secondary processing is eliminated. It is shown that such joints blend the structural benefits of adhesive and mechanically connected joints, and that the fabrication process is feasible for low-cost, large-scale production as applicable to the shipbuilding industry. Analysis procedures used for designing such joints are presented consisting of an adhesive joint design theory and a pin placement theory. These analysis tools are used in the design of specimens, specific designs are fabricated, and these evaluated through structural tests. Structural tests include quasi-static loading and low cycle fatigue evaluation. This research has thereby invented a novel philosophy on joints, created the manufacturing technique for fabricating such joints, established simple to apply analysis procedures used in the design of such joints (consisting of both an adhesive and a pin placement analysis), and has validated the methodology through specimen fabrication and testing.

Watershed Central: An Integrated Watershed Assessment and Management Website (MO presentation)

EPA Science Inventory

The U.S. EPA’s Office of Water (OW), Office of Research and Development (ORD), and Office of Environmental Information (OEI) have teamed together with other Federal Agencies, state and local agencies, tribal agencies, and non-government organizations, to develop an integrated fra...

Data Integrity: Beware of Viruses

ERIC Educational Resources Information Center

Bergren, Martha Dewey

2004-01-01

School nurses and health office employees are the creators and caretakers of legal documentation. School nurses have an ethical and legal obligation to protect the integrity of electronic student health records. Although there are many threats to data integrity, from inadequate hardware to electrical surges, one of the most pervasive threats to…

Method for PE Pipes Fusion Jointing Based on TRIZ Contradictions Theory

NASA Astrophysics Data System (ADS)

Sun, Jianguang; Tan, Runhua; Gao, Jinyong; Wei, Zihui

The core of the TRIZ theories is the contradiction detection and solution. TRIZ provided various methods for the contradiction solution, but all that is not systematized. Combined with the technique system conception, this paper summarizes an integration solution method for contradiction solution based on the TRIZ contradiction theory. According to the method, a flowchart of integration solution method for contradiction is given. As a casestudy, method of fusion jointing PE pipe is analysised.

78 FR 69853 - Meeting of the Advisory Group on Prevention, Health Promotion, and Integrative and Public Health

Federal Register 2010, 2011, 2012, 2013, 2014

2013-11-21

... Promotion, and Integrative and Public Health AGENCY: Office of the Surgeon General of the United States Public Health Service, Office of the Assistant Secretary for Health, Office of the Secretary, Department... Integrative and Public Health (the ``Advisory Group''). The meeting will be open to the public. Information...

78 FR 48877 - Meeting of the Advisory Group on Prevention, Health Promotion, and Integrative and Public Health

Federal Register 2010, 2011, 2012, 2013, 2014

2013-08-12

... Promotion, and Integrative and Public Health AGENCY: Office of the Surgeon General of the United States Public Health Service, Office of the Assistant Secretary for Health, Office of the Secretary, Department... Integrative and Public Health (the ``Advisory Group''). The meeting will be open to the public. Information...

37 CFR 1.414 - The United States Patent and Trademark Office as a Designated Office or Elected Office.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 37 Patents, Trademarks, and Copyrights 1 2010-07-01 2010-07-01 false The United States Patent and Trademark Office as a Designated Office or Elected Office. 1.414 Section 1.414 Patents, Trademarks, and Copyrights UNITED STATES PATENT AND TRADEMARK OFFICE, DEPARTMENT OF COMMERCE GENERAL RULES OF PRACTICE IN PATENT CASES International Processing...

Historical model for editor and Office of Research Integrity cooperation in handling allegations, investigation, and retraction in a contentious (Abbs) case of research misconduct.

PubMed

Price, Alan R; Daroff, Robert B

2015-01-01

Cooperation between a journal editor and the federal Office of Research Integrity (ORI) in addressing investigations of research misconduct, each performing their own responsibilities while keeping each other informed of events and evidence, can be critical to the professional and regulatory resolution of a case. This paper describes the history of one of ORI's most contentious investigations that involved falsification of research on Parkinson's disease patients by James Abbs, Professor of Neurology, University of Wisconsin, published in the journal Neurology, which was handled cooperatively by the authors, who were the chief ORI investigator and the Editor-in-Chief of Neurology, respectively.

Field study of an integral backwall bridge : final report.

DOT National Transportation Integrated Search

1996-01-01

Integral bridges offer reduced maintenance expenditures, primarily due to the elimination of deck expansion joints. The design of an integral bridge, however, is complicated by the soil-structure interaction associated with thermal movements. It has ...

Stair ascent with an innovative microprocessor-controlled exoprosthetic knee joint.

PubMed

Bellmann, Malte; Schmalz, Thomas; Ludwigs, Eva; Blumentritt, Siegmar

2012-12-01

Climbing stairs can pose a major challenge for above-knee amputees as a result of compromised motor performance and limitations to prosthetic design. A new, innovative microprocessor-controlled prosthetic knee joint, the Genium, incorporates a function that allows an above-knee amputee to climb stairs step over step. To execute this function, a number of different sensors and complex switching algorithms were integrated into the prosthetic knee joint. The function is intuitive for the user. A biomechanical study was conducted to assess objective gait measurements and calculate joint kinematics and kinetics as subjects ascended stairs. Results demonstrated that climbing stairs step over step is more biomechanically efficient for an amputee using the Genium prosthetic knee than the previously possible conventional method where the extended prosthesis is trailed as the amputee executes one or two steps at a time. There is a natural amount of stress on the residual musculoskeletal system, and it has been shown that the healthy contralateral side supports the movements of the amputated side. The mechanical power that the healthy contralateral knee joint needs to generate during the extension phase is also reduced. Similarly, there is near normal loading of the hip joint on the amputated side.

Educational Services Officer

DTIC Science & Technology

1988-01-01

publication is a a recommended reading list. A brief description valuable tool to an ESO when it is available of the subject matter of each is given, and...factors that must be considered in the arrangement of an office. 9. Identify the basic office products. 3. Identify the tools necessary for the...of the office. Personnel served by the tools of the trade; however, if the office this office judge it by the measure of does not provide

Modeling thermal and irradiation-induced swelling effects on the integrity of Ti3SiC2/SiC joints

NASA Astrophysics Data System (ADS)

Nguyen, Ba Nghiep; Henager, Charles H.; Kurtz, Richard J.

2017-11-01

Previously, results for CVD-SiC joined by a solid state displacement reaction to form a dual-phase SiC/MAX phase joint subsequently irradiated at 800 °C to 5 dpa indicated some cracking in the joint. This paper elucidates the cracking origin by developing a model that accounts for differential thermal expansion and irradiation-induced swelling between the substrate and joint materials by using a continuum damage mechanics approach with support from micromechanical modeling. Damage accumulation in joined specimens irradiated at four temperatures (300 °C, 400 °C, 500 °C and 800 °C) is analyzed. We assume the experimental irradiation dose is sufficient to cause saturation swelling in SiC. The analyses indicate that the SiC/MAX joint survives irradiation-induced swelling at all the irradiation temperatures considered. The joint experiences only minor damage when heated to and irradiated at 800 °C as well as cooling to room temperature. The prediction agrees with the experimental findings available for this case. However, the joint heated to 300 °C suffers severe damage during irradiation-induced swelling at this temperature, and additional damage after cooling to room temperature. Irradiation at 400 °C and subsequent cooling to room temperature produced similar damage to the irradiation 300 °C case, but to a lesser extent. The joint heated to 500 °C and irradiated at this temperature suffered only very minor damage, but further moderate damage occurred after cooling to room temperature.

The hindlimb in walking horses: 2. Net joint moments and joint powers.

PubMed

Clayton, H M; Hodson, E; Lanovaz, J L; Colborne, G R

2001-01-01

The objective of the study was to describe net joint moments and joint powers in the equine hindlimb during walking. The subjects were 5 sound horses. Kinematic and force data were collected synchronously and combined with morphometric information to determine net joint moments at each hindlimb joint throughout stance and swing. The results showed that the net joint moment was on the caudal/plantar side of all hindlimb joints at the start of stance when the limb was being actively retracted. It moved to the cranial/dorsal side around 24% stride at the hip and stifle and in terminal stance at the more distal joints. It remained on the cranial/dorsal side of all joints during the first half of swing to provide active limb protraction, then moved to the caudal/plantar aspect to reverse the direction of limb motion prior to ground contact. The hip joint was the main source of energy generation throughout the stride. It was assisted by the tarsal joint in both stance and swing phases and by the fetlock joint during the stance phase. The coffin joint acted as an energy damper during stance, whereas the stifle joint absorbed almost equal amounts of energy in the stance and swing phases. The coffin and fetlock joints absorbed energy as the limb was protracted and retracted during the swing phase, suggesting that their movements were driven by inertial forces. Future studies will apply these findings to detect changes in the energy profiles due to specific soft tissue injuries.

Altered neuromuscular control and ankle joint kinematics during walking in subjects with functional instability of the ankle joint.

PubMed

Delahunt, Eamonn; Monaghan, Kenneth; Caulfield, Brian

2006-12-01

The ankle joint requires very precise neuromuscular control during the transition from terminal swing to the early stance phase of the gait cycle. Altered ankle joint arthrokinematics and muscular activity have been cited as potential factors that may lead to an inversion sprain during the aforementioned time periods. However, to date, no study has investigated patterns of muscle activity and 3D joint kinematics simultaneously in a group of subjects with functional instability compared with a noninjured control group during these phases of the gait cycle. To compare the patterns of lower limb 3D joint kinematics and electromyographic activity during treadmill walking in a group of subjects with functional instability with those observed in a control group. Controlled laboratory study. Three-dimensional angular velocities and displacements of the hip, knee, and ankle joints, as well as surface electromyography of the rectus femoris, peroneus longus, tibialis anterior, and soleus muscles, were recorded simultaneously while subjects walked on a treadmill at a velocity of 4 km/h. Before heel strike, subjects with functional instability exhibited a decrease in vertical foot-floor clearance (12.62 vs 22.84 mm; P < .05), as well as exhibiting a more inverted position of the ankle joint before, at, and immediately after heel strike (1.69 degrees , 2.10 degrees , and -0.09 degrees vs -1.43 degrees , -1.43 degrees , and -2.78 degrees , respectively [minus value = eversion]; P < .05) compared with controls. Subjects with functional instability were also observed to have an increase in peroneus longus integral electromyography during the post-heel strike time period (107.91%.millisecond vs 64.53%.millisecond; P < .01). The altered kinematics observed in this study could explain the reason subjects with functional instability experience repeated episodes of ankle inversion injury in situations with only slight or no external provocation. It is hypothesized that the observed

78 FR 38345 - Meeting of the Advisory Group on Prevention, Health Promotion, and Integrative and Public Health

Federal Register 2010, 2011, 2012, 2013, 2014

2013-06-26

... Promotion, and Integrative and Public Health AGENCY: Office of the Surgeon General of the United States Public Health Service, Office of the Assistant Secretary for Health, Office of the Secretary, Department... Integrative and Public Health (the ``Advisory Group''). The meeting will be open to the public. [[Page 38346...

Joint Precision Approach and Landing System Increment 1A (JPALS Inc 1A)

DTIC Science & Technology

2015-12-01

Selected Acquisition Report ( SAR ) RCS: DD-A&T(Q&A)823-238 Joint Precision Approach and Landing System Increment 1A (JPALS Inc 1A) As of FY 2017...President’s Budget Defense Acquisition Management Information Retrieval (DAMIR) March 10, 2016 11:30:56 UNCLASSIFIED JPALS Inc 1A December 2015 SAR ...Cost JPALS Inc 1A December 2015 SAR March 10, 2016 11:30:56 UNCLASSIFIED 3 PB - President’s Budget PE - Program Element PEO - Program Executive Officer

Priorities for a 21st-century defense: aligning u.s. Army environmental science and engineering officer resources with the department of defense strategic guidance.

PubMed

Licina, Derek; Rufolo, Dennis; Story, Mike

2013-01-01

The recently published Department of Defense (DoD) strategic guidance highlights the need to ?shape a joint force for the future.? Supporting requirements to shape the joint force while the overall DoD force structure is reduced will be challenging. Fortunately, based on its unique training and experience, the Army Environmental Science and Engineering Officer (ESEO) profession is positioned today to fill anticipated joint public health requirements. Obtaining the U.S. Army Medical Department (AMEDD) approval to meet these requirements will have near-term consequences for the ESEO profession as some existing (albeit antiquated) authorizations may go unfilled. However, long-term dividends for the Medical Service Corps (MSC), AMEDD, Army, and DoD will be achieved by realigning critical resources to future joint and interagency requirements. Assigning ESEOs now to organizations such as the Theater Special Operations Commands (TSOCs), U.S. Agency for International Development (USAID), and the North Atlantic Treaty Organization (NATO) with perceived and real joint force health protection/public health requirements through unique means will ensure our profession remains relevant today and supports the joint force of tomorrow. 2013.

Joint Center for Artificial Photosynthesis (JCAP): DOE's Solar Fuels Energy Innovation Hub (2011 EFRC Summit)

ScienceCinema

Lewis, Nate

2018-02-16

The Joint Center for Artificial Photosynthesis (JCAP) is a DOE Energy Innovation Hub focused on fuels from sunlight. JCAP's Director, Nate Lewis, spoke at the 2011 EFRC Summit about what JCAP is and how it is partnering with the EFRC community to accelerate the progress towards new solar fuels. The 2011 EFRC Summit and Forum brought together the EFRC community and science and policy leaders from universities, national laboratories, industry and government to discuss "Science for our Nation's Energy Future." In August 2009, the Office of Science established 46 Energy Frontier Research Centers. The EFRCs are collaborative research efforts intended to accelerate high-risk, high-reward fundamental research, the scientific basis for transformative energy technologies of the future. These Centers involve universities, national laboratories, nonprofit organizations, and for-profit firms, singly or in partnerships, selected by scientific peer review. They are funded at $2 to $5 million per year for a total planned DOE commitment of $777 million over the initial five-year award period, pending Congressional appropriations. These integrated, multi-investigator Centers are conducting fundamental research focusing on one or more of several “grand challenges” and use-inspired “basic research needs” recently identified in major strategic planning efforts by the scientific community. The purpose of the EFRCs is to integrate the talents and expertise of leading scientists in a setting designed to accelerate research that transforms the future of energy and the environment.

The Analysis of Adhesively Bonded Advanced Composite Joints Using Joint Finite Elements

NASA Technical Reports Server (NTRS)

Stapleton, Scott E.; Waas, Anthony M.

2012-01-01

The design and sizing of adhesively bonded joints has always been a major bottleneck in the design of composite vehicles. Dense finite element (FE) meshes are required to capture the full behavior of a joint numerically, but these dense meshes are impractical in vehicle-scale models where a course mesh is more desirable to make quick assessments and comparisons of different joint geometries. Analytical models are often helpful in sizing, but difficulties arise in coupling these models with full-vehicle FE models. Therefore, a joint FE was created which can be used within structural FE models to make quick assessments of bonded composite joints. The shape functions of the joint FE were found by solving the governing equations for a structural model for a joint. By analytically determining the shape functions of the joint FE, the complex joint behavior can be captured with very few elements. This joint FE was modified and used to consider adhesives with functionally graded material properties to reduce the peel stress concentrations located near adherend discontinuities. Several practical concerns impede the actual use of such adhesives. These include increased manufacturing complications, alterations to the grading due to adhesive flow during manufacturing, and whether changing the loading conditions significantly impact the effectiveness of the grading. An analytical study is conducted to address these three concerns. Furthermore, proof-of-concept testing is conducted to show the potential advantages of functionally graded adhesives. In this study, grading is achieved by strategically placing glass beads within the adhesive layer at different densities along the joint. Furthermore, the capability to model non-linear adhesive constitutive behavior with large rotations was developed, and progressive failure of the adhesive was modeled by re-meshing the joint as the adhesive fails. Results predicted using the joint FE was compared with experimental results for various

Spacesuit mobility knee joints

NASA Technical Reports Server (NTRS)

Vykukal, H. C. (Inventor)

1979-01-01

Pressure suit mobility joints are for use in interconnecting adjacent segments of an hermetically sealed spacesuit in which low torques, low leakage and a high degree of reliability are required. Each of the joints is a special purpose joint characterized by substantially constant volume and low torque characteristics and includes linkages which restrain the joint from longitudinal distension and includes a flexible, substantially impermeable diaphragm of tubular configuration spanning the distance between pivotally supported annuli. The diaphragms of selected joints include rolling convolutions for balancing the joints, while various joints include wedge-shaped sections which enhance the range of motion for the joints.

Research on Joint Parameter Inversion for an Integrated Underground Displacement 3D Measuring Sensor

PubMed Central

Shentu, Nanying; Qiu, Guohua; Li, Qing; Tong, Renyuan; Shentu, Nankai; Wang, Yanjie

2015-01-01

Underground displacement monitoring is a key means to monitor and evaluate geological disasters and geotechnical projects. There exist few practical instruments able to monitor subsurface horizontal and vertical displacements simultaneously due to monitoring invisibility and complexity. A novel underground displacement 3D measuring sensor had been proposed in our previous studies, and great efforts have been taken in the basic theoretical research of underground displacement sensing and measuring characteristics by virtue of modeling, simulation and experiments. This paper presents an innovative underground displacement joint inversion method by mixing a specific forward modeling approach with an approximate optimization inversion procedure. It can realize a joint inversion of underground horizontal displacement and vertical displacement for the proposed 3D sensor. Comparative studies have been conducted between the measured and inversed parameters of underground horizontal and vertical displacements under a variety of experimental and inverse conditions. The results showed that when experimentally measured horizontal displacements and vertical displacements are both varied within 0 ~ 30 mm, horizontal displacement and vertical displacement inversion discrepancies are generally less than 3 mm and 1 mm, respectively, under three kinds of simulated underground displacement monitoring circumstances. This implies that our proposed underground displacement joint inversion method is robust and efficient to predict the measuring values of underground horizontal and vertical displacements for the proposed sensor. PMID:25871714

Research on joint parameter inversion for an integrated underground displacement 3D measuring sensor.

PubMed

Shentu, Nanying; Qiu, Guohua; Li, Qing; Tong, Renyuan; Shentu, Nankai; Wang, Yanjie

2015-04-13

Underground displacement monitoring is a key means to monitor and evaluate geological disasters and geotechnical projects. There exist few practical instruments able to monitor subsurface horizontal and vertical displacements simultaneously due to monitoring invisibility and complexity. A novel underground displacement 3D measuring sensor had been proposed in our previous studies, and great efforts have been taken in the basic theoretical research of underground displacement sensing and measuring characteristics by virtue of modeling, simulation and experiments. This paper presents an innovative underground displacement joint inversion method by mixing a specific forward modeling approach with an approximate optimization inversion procedure. It can realize a joint inversion of underground horizontal displacement and vertical displacement for the proposed 3D sensor. Comparative studies have been conducted between the measured and inversed parameters of underground horizontal and vertical displacements under a variety of experimental and inverse conditions. The results showed that when experimentally measured horizontal displacements and vertical displacements are both varied within 0~30 mm, horizontal displacement and vertical displacement inversion discrepancies are generally less than 3 mm and 1 mm, respectively, under three kinds of simulated underground displacement monitoring circumstances. This implies that our proposed underground displacement joint inversion method is robust and efficient to predict the measuring values of underground horizontal and vertical displacements for the proposed sensor.

Efficacy of Dorsoradial Capsulodesis for Trapeziometacarpal Joint Instability: A Cadaver Study.

PubMed

Chenoweth, Brian A; O'Mahony, Gavin D; Fitzgerald, Casey; Stoner, Julie A; O'Donoghue, Daniel L; Rayan, Ghazi M

2017-01-01

To test the biomechanical properties of the dorsoradial capsulodesis procedure. Six cadaveric hands were used. After exposing the trapeziometacarpal (TMC) joint, we placed Kirschner wires in the distal radius and thumb metacarpal. The rotation shear test was then performed to test the joint axial laxity, and angular measurements using Kirschner wires as reference points were documented. The dorsoradial (DR) ligament and capsule were released, followed by the intermetacarpal (IM) ligament; angular measurements were obtained. Finally, the DR capsulodesis procedure was performed, and final measurements were obtained. Comparisons were made among the various stages of ligament integrity to determine the amount of stability provided by DR capsulodesis. All cadavers demonstrated axial laxity with transection of the DR ligament; an increase in stability was obtained after DR capsulodesis. Transection of the capsule and IM ligament caused increased laxity relative to the native joint (median, 24° and 35°, respectively, on rotational testing). After we performed DR capsulodesis, rotational stability improved by a median of 41° compared with DR ligament transection, 49° compared with DR and IM ligament transection, and 18° relative to the native joint. Dorsoradial capsulodesis restores rotational stability for TMC joint after division of the DR and IM ligaments. The stability achieved was statistically significant compared with both an intact native TMC joint and induced laxity of the TMC joint. The DR capsulodesis procedure may improve rotational stability to the TMC joint. Copyright © 2017 American Society for Surgery of the Hand. Published by Elsevier Inc. All rights reserved.

High School Dual Enrollment in North Carolina: The Perspectives of Community College Chief Academic Officers

ERIC Educational Resources Information Center

Gallman, Kathleen L.

2017-01-01

This study evaluates dual enrollment programs through the eyes of North Carolina's community college chief academic officers (CAOs). Grounded in Tinto's theory of integration and the transformational leadership construct, a mixed methods approach was utilized to evaluate the perceptions of CAOs regarding the integration of high school students…

Strategic Black Officer Capital Investment: Increasing Competitiveness for General Officer

DTIC Science & Technology

2010-05-17

support a discussion between the genders since African American women are completing their degrees at a higher rate than men . There are a many...officers, but this was out of an officer corps that numbered more than 15 150,000 men and women , meaning African Americans still made up less than...senior officers.‖6 My research does not necessarily separate African American men and women officers. However, the most recent graduation trends

77 FR 33220 - Advisory Group on Prevention, Health Promotion, and Integrative and Public Health; Notice of Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2012-06-05

... Integrative and Public Health; Notice of Meeting AGENCY: Office of the Surgeon General of the United States Public Health Service, Office of the Assistant Secretary for Health, Office of the Secretary, Department... Integrative and Public Health (the ``Advisory Group''). The web meeting will be open to the public. The agenda...

Ares I-X Management Office (MMO) Integrated Master Schedule (IMS)

NASA Technical Reports Server (NTRS)

Heintzman, Keith; Askins, Bruce

2010-01-01

Objectives: Demonstrate control of a dynamically similar, integrated Ares I/Orion, using Ares I relevant ascent control algorithms. Perform an in-flight separation/staging event between a Ares I-similar First Stage and a representative Upper Stage. Demonstrate assembly and recovery of a new Ares I-like First Stage element at KSC. Demonstrate First Stage separation sequencing, and quantify First Stage atmospheric entry dynamics, and parachute performance. Characterize magnitude of integrated vehicle roll torque throughout First Stage flight.

Integrated Communications and Work Efficiency: Impacts on Organizational Structure and Power.

ERIC Educational Resources Information Center

Wigand, Rolf T.

This paper reviews the work environment surrounding integrated office systems, synthesizes the known effects of automated office technologies, and discusses their impact on work efficiency in office environments. Particular attention is given to the effect of automated technologies on networks, workflow/processes, and organizational structure and…

Joint Enabling Capabilities Command

Science.gov Websites

Executive Director Chief of Staff Joint Planning Support Element Joint Communications Support Element mission Joint Enabling Capabilities Command provides decisive joint communications, planning and public and responsive support for joint communications, planning and public affairs. Priorities * Deliver

Surface characteristics of bioactive Ti fabricated by chemical treatment for cartilaginous-integration.

PubMed

Miyajima, Hiroyuki; Ozer, Fusun; Imazato, Satoshi; Mante, Francis K

2017-09-01

Artificial hip joints are generally expected to fail due to wear after approximately 15years and then have to be replaced by revision surgery. If articular cartilage can be integrated onto the articular surfaces of artificial joints in the same way as osseo-integration of titanium dental implants, the wear of joint implants may be reduced or prevented. However, very few studies have focused on the relationship between Ti surface and cartilage. To explore the possibility of cartilaginous-integration, we fabricated chemically treated Ti surfaces with H 2 O 2 /HCl, collagen type II and SBF, respectively. Then, we evaluated surface characteristics of the prepared Ti samples and assessed the cartilage formation by culturing chondrocytes on the Ti samples. When oxidized Ti was immersed in SBF for 7days, apatite was formed on the Ti surface. The surface characteristics of Ti indicated that the wettability was increased by all chemical treatments compared to untreated Ti, and that H 2 O 2 /HCl treated surface had significantly higher roughness compared to the other three groups. Chondrocytes produced significantly more cartilage matrix on all chemically treated Ti surfaces compared to untreated Ti. Thus, to realize cartilaginous-integration and to prevent wear of the implants in joints, application of bioactive Ti formed by chemical treatment would be a promising and effective strategy to improve durability of joint replacement. Copyright © 2017 Elsevier B.V. All rights reserved.

Modeling thermal and irradiation-induced swelling effects on the integrity of Ti 3SiC 2/SiC joints

DOE Office of Scientific and Technical Information (OSTI.GOV)

Nguyen, Ba Nghiep; Henager, Charles H.; Kurtz, Richard J.

Previously, results for CVD-SiC joined by a solid state displacement reaction to form a dual-phase SiC/MAX phase joint subsequently irradiated at 800 °C to 5 dpa indicated some cracking in the joint. Here, this paper elucidates the cracking origin by developing a model that accounts for differential thermal expansion and irradiation-induced swelling between the substrate and joint materials by using a continuum damage mechanics approach with support from micromechanical modeling. Damage accumulation in joined specimens irradiated at four temperatures (300 °C, 400 °C, 500 °C and 800 °C) is analyzed. We assume the experimental irradiation dose is sufficient to causemore » saturation swelling in SiC. The analyses indicate that the SiC/MAX joint survives irradiation-induced swelling at all the irradiation temperatures considered. The joint experiences only minor damage when heated to and irradiated at 800 °C as well as cooling to room temperature. The prediction agrees with the experimental findings available for this case. However, the joint heated to 300 °C suffers severe damage during irradiation-induced swelling at this temperature, and additional damage after cooling to room temperature. Irradiation at 400 °C and subsequent cooling to room temperature produced similar damage to the irradiation 300 °C case, but to a lesser extent. Finally, the joint heated to 500 °C and irradiated at this temperature suffered only very minor damage, but further moderate damage occurred after cooling to room temperature.« less

Modeling thermal and irradiation-induced swelling effects on the integrity of Ti 3SiC 2/SiC joints

DOE PAGES

Nguyen, Ba Nghiep; Henager, Charles H.; Kurtz, Richard J.

2017-09-08

Previously, results for CVD-SiC joined by a solid state displacement reaction to form a dual-phase SiC/MAX phase joint subsequently irradiated at 800 °C to 5 dpa indicated some cracking in the joint. Here, this paper elucidates the cracking origin by developing a model that accounts for differential thermal expansion and irradiation-induced swelling between the substrate and joint materials by using a continuum damage mechanics approach with support from micromechanical modeling. Damage accumulation in joined specimens irradiated at four temperatures (300 °C, 400 °C, 500 °C and 800 °C) is analyzed. We assume the experimental irradiation dose is sufficient to causemore » saturation swelling in SiC. The analyses indicate that the SiC/MAX joint survives irradiation-induced swelling at all the irradiation temperatures considered. The joint experiences only minor damage when heated to and irradiated at 800 °C as well as cooling to room temperature. The prediction agrees with the experimental findings available for this case. However, the joint heated to 300 °C suffers severe damage during irradiation-induced swelling at this temperature, and additional damage after cooling to room temperature. Irradiation at 400 °C and subsequent cooling to room temperature produced similar damage to the irradiation 300 °C case, but to a lesser extent. Finally, the joint heated to 500 °C and irradiated at this temperature suffered only very minor damage, but further moderate damage occurred after cooling to room temperature.« less

Low Emissions Alternative Power (LEAP) Project Office Business Team of the Aeropropulsion Research Program Office (ARPO) Org. 0140

NASA Technical Reports Server (NTRS)

Buttler, Jennifer A.

2004-01-01

The program for which I am working at this summer is Propulsion and Power/Low Emissions Alternative Power (P&P/LEAP). It invests in a fundamental TRL 1-6 research and technology portfolio that will enable the future of: Alternative fuels and/or alternative propulsion systems, non-combustion (electric) propulsion systems. P&P/LEAP will identify and capitalize on the highest potential concepts generated both internal and external to the Agency. During my 2004 summer at NASA Glenn Research Center, I worked with my mentor Barbara Mader, in the Project Office with the Business Team completing various tasks for the project and personnel. The LEAP project is a highly matrixed organization. The Project Office is responsible for the goals advocacy and dollar (budget) of the LEAP project. The objectives of the LEAP Project are to discover new energy sources and develop unconventional engines and power systems directed towards greatly reduced emissions, enable new vehicle concepts for public mobility, new science missions and national security. The Propulsion and PowerLow Emissions Alternative Power directly supports the environmental, mobility, national security objectives of the Vehicle Systems Program and the Aeronautics Technology Theme. Technology deliverables include the demonstration through integrated ground tests, a constant volume combustor in an engine system, and UAV/small transport aircraft all electric power system. My mentor serves as a key member of the management team for the Aeropropulsion Research Program Office (ARPO). She has represented the office on numerous occasions, and is a member of a number of center-wide panels/teams, such as the Space management Committee and is chair to the Business Process Consolidation Team. She is responsible for the overall coordination of resources for the Propulsion and Power Project - from advocacy to implementation. The goal for my summer at NASA was to document processes and archive program documents from the past

Inquiry into the Potential Effects of Establishing a Joint ROTC Program to Be Implemented during the Early Years of College

ERIC Educational Resources Information Center

Meyer, Herman Skeets

2012-01-01

This is the report of a policy research study that examined the potential outcomes of instituting a standardized "Joint Reserve Officer Training Corps" during the first two years of college. Focus groups at three ROTC universities and interviews with subject matter experts were conducted to explore the meaning and purpose of jointness…

34 CFR 400.5 - Under what conditions may funds under the Act be used for the joint funding of programs?

Code of Federal Regulations, 2010 CFR

2010-07-01

... VOCATIONAL AND APPLIED TECHNOLOGY EDUCATION PROGRAMS-GENERAL PROVISIONS § 400.5 Under what conditions may... 34 Education 3 2010-07-01 2010-07-01 false Under what conditions may funds under the Act be used for the joint funding of programs? 400.5 Section 400.5 Education Regulations of the Offices of the...

77 FR 42313 - Recharter of the Advisory Group on Prevention, Health Promotion, and Integrative and Public Health

Federal Register 2010, 2011, 2012, 2013, 2014

2012-07-18

... Promotion, and Integrative and Public Health AGENCY: Office of the Assistant Secretary for Health, Office of... Promotion, and Integrative and Public Health. FOR FURTHER INFORMATION CONTACT: Corinne Graffunder... Integrative and Public Health (the ``Advisory Group'') within the Department of Health and Human Services. To...

The Glass Ceiling - A Question of Joint Officer Development - Why Only Five USAF Geographic Combatant Commanders?

DTIC Science & Technology

2010-07-26

kit/OEF.asp (accessed March 6, 2011). 19 U.S. Central Command. "US CENTCOM Leadership: General James N. Mattis , Commander,‖ http... Mattis , USMC Commander, USCENTCOM 0 2 Cmdr, Task Force 58 Cmdr, USJFCOM Admiral James G. Stavridis, USN Commander, USEUCOM 1 2 Plans Officer, JCS...U.S. Central Command. "US CENTCOM Leadership." General James N. Mattis . https://slsp.http://www.centcom.mil/en/about-centcom/leadership

77 FR 21158 - VA Directive 0005 on Scientific Integrity: Availability for Review and Comment

Federal Register 2010, 2011, 2012, 2013, 2014

2012-04-09

... the Director, Office of Science and Technology Policy's Memorandum of December 17, 2010, on scientific integrity. It addresses how VA ensures quality science in its methods, review, policy application, and...: Background The Presidential Memorandum on Scientific Integrity and the Office of Science and Technology...

Construction Management Module: Contingency Contracting Synergistic Approach Integrating Joint Capabilities for USSOCOM

DTIC Science & Technology

2010-01-29

mr_if`=mlif`v - ix - k^s^i=mlpqdo^ar^qb=p`elli= Acronym Listing AAR After-action Report ACC Acquisition Community Connection ADDIE Analyze...J3 Operations J4 Logistics J5 Plans J6 Communications J8 Programming and Comptroller J&A Justification and Approval JARB Joint...Due to geographical and communication constraints, the sample of informants was limited to 20 current USSOCOM personnel. However, the

Safety climate and its association with office type and team involvement in primary care.

PubMed

Gehring, Katrin; Schwappach, David L B; Battaglia, Markus; Buff, Roman; Huber, Felix; Sauter, Peter; Wieser, Markus

2013-09-01

To assess differences in safety climate perceptions between occupational groups and types of office organization in primary care. Primary care physicians and nurses working in outpatient offices were surveyed about safety climate. Explorative factor analysis was performed to determine the factorial structure. Differences in mean climate scores between staff groups and types of office were tested. Logistic regression analysis was conducted to determine predictors for a 'favorable' safety climate. 630 individuals returned the survey (response rate, 50%). Differences between occupational groups were observed in the means of the 'team-based error prevention'-scale (physician 4.0 vs. nurse 3.8, P < 0.001). Medical centers scored higher compared with single-handed offices and joint practices on the 'team-based error prevention'-scale (4.3 vs. 3.8 vs. 3.9, P < 0.001) but less favorable on the 'rules and risks'-scale (3.5 vs. 3.9 vs. 3.7, P < 0.001). Characteristics on the individual and office level predicted favorable 'team-based error prevention'-scores. Physicians (OR = 0.4, P = 0.01) and less experienced staff (OR 0.52, P = 0.04) were less likely to provide favorable scores. Individuals working at medical centers were more likely to provide positive scores compared with single-handed offices (OR 3.33, P = 0.001). The largest positive effect was associated with at least monthly team meetings (OR 6.2, P < 0.001) and participation in quality circles (OR 4.49, P < 0.001). Results indicate that frequent quality circle participation and team meetings involving all team members are effective ways to strengthen safety climate in terms of team-based strategies and activities in error prevention.

Watershed Central: An Integrated Watershed Assessment and Management Website (Columbus, OH workshop).

EPA Science Inventory

The U.S.EPA’s Office of Water (OW), Office of Research and Development (ORD), and Office of Environmental Information (OEI) have teamed together with other Federal Agencies, state and local agencies, tribal agencies, and non-government organizations, to develop an integrated fram...

MP Joint Arthritis

MedlinePlus

... is extensive and severe, joint replacement or joint fusion are effective surgical options. Learn more about joint ... the tabs at the top (Video, Articles/WEB, Images, JHS, Products/Vendors), or the filters on the ...

Experimental Study of the Compression Response of Fluted-Core Composite Panels with Joints

NASA Technical Reports Server (NTRS)

Schultz, Marc R.; Rose, Cheryl A.; Guzman, J. Carlos; McCarville, Douglas; Hilburger, Mark W.

2012-01-01

Fluted-core sandwich composites consist of integral angled web members spaced between laminate face sheets, and may have the potential to provide benefits over traditional sandwich composites for certain aerospace applications. However, fabrication of large autoclave-cured fluted-core cylindrical shells with existing autoclaves will require that the shells be fabricated in segments, and joined longitudinally to form a complete barrel. Two different longitudinal fluted-core joint designs were considered experimentally in this study. In particular, jointed fluted-core-composite panels were tested in longitudinal compression because longitudinal compression is the primary loading condition in dry launch-vehicle barrel sections. One of the joint designs performed well in comparison with unjointed test articles, and the other joint design failed at loads approximately 14% lower than unjointed test articles. The compression-after-impact (CAI) performance of jointed fluted-core composites was also investigated by testing test articles that had been subjected to 6 ft-lb impacts. It was found that such impacts reduced the load-carrying capability by 9% to 40%. This reduction is dependent on the joint concept, component flute size, and facesheet thickness.

Space Power Integration: Perspectives from Space Weapons Officers

DTIC Science & Technology

2006-12-01

staff at Air University Press, Dr. Philip Adkins, Mrs. Sherry Terrell , and Mrs. Vivian O’Neal. Their creation of an integrated book from nine...Techniques of Complex Systems Science: An Overview ( Ann Arbor, MI: Center for the Study of Complex Sys- tems, University of Michigan, 9 July 2003), 34...Depart- ment of the Navy Space Policy, 26 August 1993. Shalizi, Cosma Rohilla. Methods and Techniques of Complex Systems Science: An Overview. Ann

Development of three-dimensional prints of arthritic joints for supporting patients' awareness to structural damage.

PubMed

Kleyer, Arnd; Beyer, Laura; Simon, Christoph; Stemmler, Fabian; Englbrecht, Matthias; Beyer, Christian; Rech, Jürgen; Manger, Bernhard; Krönke, Gerhard; Schett, Georg; Hueber, Axel J

2017-02-10

Rheumatoid arthritis (RA) and psoriatic arthritis (PsA) result in severe joint destruction and functional disability if left untreated. We aim to develop tools that help patients with RA and PsA to understand and experience the impact of inflammatory joint disease on the integrity of their (juxta-articular) bone and increase adherence to medical treatment. In this study, we used high-resolution peripheral quantitative computed tomography (HR-pQCT) to develop 3D prototypes of patients' finger joints. HR-pQCT (XtremeCT, Scanco) measurements were performed in healthy individuals and patients with inflammatory joint disease, followed by a 3D print using the objet30 printer. Healthy participants (n = 10), and patients (n = 15 with RA and 15 with PsA) underwent a detailed, standardized interview with demonstration of printed joints. Utilizing HR-pQCT images of metacarpophalangeal (MCP) heads, high quality and exact 3D prints as prototypes were created. Erosions in different sizes and the trabecular network printed in detail were visualized, demonstrating structural reduction in arthritic vs. healthy bone. After demonstration of 3D prints (healthy vs. erosive joint, visual and haptic) 26/39 (66%) participants (including healthy volunteers) were deeply affected, often quoting "shock". Of the patients with RA and PsA, 13/15 (86%) and 11/15 (73%), respectively, stated that they would rethink their attitude to medication adherence. More importantly, 21/24 patients with RA or PsA (87.5%) expressed that they would have wished to see such 3D prints during their first disease-specific conversations. Using arthro-haptic 3D printed prototypes of joints may help to better understand the impact of inflammatory arthritides on bone integrity and long-term damage.

Data Integrity: Backup

ERIC Educational Resources Information Center

Bergren, Martha Dewey

2005-01-01

School nurses and health office staff have an ethical and legal obligation to protect the integrity of electronic student health records. Various sources, both accidental and malicious, can threaten student health data. School nurses must employ regular and reliable methods to back up student health data.

28 CFR 0.118 - Office of Chief Administrative Hearing Officer.

Code of Federal Regulations, 2010 CFR

2010-07-01

... Officer. 0.118 Section 0.118 Judicial Administration DEPARTMENT OF JUSTICE ORGANIZATION OF THE DEPARTMENT OF JUSTICE Executive Office for Immigration Review § 0.118 Office of Chief Administrative Hearing... Law Judges in performance of their duties in accordance with 8 U.S.C. 1324 A and B. ...

U.S. Department of Education, Office of Inspector General Semiannual Report to Congress, April 1-September 30, 2000.

ERIC Educational Resources Information Center

Office of Inspector General (ED), Washington, DC.

This report from the Office of Inspector General (OIG) identifies systemic weaknesses in the operations and programs of the U.S. Department of Education (ED). The office provides accurate financial information to make informed decisions, manage for results, and ensure operation integrity. Vigorous fraud investigations are continuing. Audits reveal…

Sustainability and integration of radioecology-position paper.

PubMed

Muikku, M; Beresford, N A; Garnier-Laplace, J; Real, A; Sirkka, L; Thorne, M; Vandenhove, H; Willrodt, C

2018-03-01

This position paper gives an overview of how the COMET project (COordination and iMplementation of a pan-European instrumenT for radioecology, a combined Collaborative Project and Coordination and Support Action under the EC/Euratom 7th Framework Programme) contributed to the integration and sustainability of radioecology in Europe via its support to and interaction with the European Radioecology ALLIANCE. COMET built upon the foundations laid by the FP7 project STAR (Strategic Network for Integrating Radioecology) Network of Excellence in radioecology. In close association with the ALLIANCE, and based on the Strategic Research Agenda (SRA), COMET developed innovative mechanisms for joint programming and implementation of radioecological research. To facilitate and foster future integration under a common federating structure, research activities developed within COMET were targeted at radioecological research needs identified in the SRA. Furthermore, COMET maintained and developed strong mechanisms for knowledge exchange, dissemination and training to enhance and maintain European capacity, competence and skills in radioecology. In the short term the work to promote radioecology will continue under the H2020 project EJP-CONCERT (European Joint Programme for the Integration of Radiation Protection Research). The EJP-CONCERT project (2015-2020) aims to develop a sustainable structure for promoting and administering joint programming and open research calls in the field of radiation protection research for Europe. In the longer term, radioecological research will be facilitated by the ALLIANCE. External funding is, however, required in order to be able to answer emerging research needs.

VIEW EAST, WEST SIDE OF TWOSTORY OFFICE BUILDING, ONESTORY OFFICE ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

VIEW EAST, WEST SIDE OF TWO-STORY OFFICE BUILDING, ONE-STORY OFFICE BUILDING, AND HEBERTS 1949 HANGAR, AND VIEW OF SOUTH SIDE OF TWO-STORY OFFICE BUILDING AND NORTH SIDE OF HEBERTS 1949 HANGAR - Capital City Airport, Capital City Aviation, North side of Grand River Avenue, Lansing, Ingham County, MI

Integrated residential photovoltaic array development

NASA Technical Reports Server (NTRS)

Shepard, N. F., Jr.

1981-01-01

The design details of an optimized integrated residential photovoltaic module/array are presented. This selected design features a waterproofing and mounting scheme which was devised to simplify the installation procedures by the avoidance of complex gasketed or caulked joints, while still maintaining a high confidence that the watertight integrity of the integral roofing surface will be achieved for the design lifetime of the system. The production and installation costs for the selected module/array design are reported for a range of annual production rates as a function of the cost of solar cells.

Exploring the use of smartphones and tablets by medical House Officers in Korle-Bu Teaching Hospital.

PubMed

Barnor-Ahiaku, Edem

2016-03-01

Smartphones and tablets are being used widely in the Western World creating benefits in healthcare. The Ministry of Health in Ghana has an e-Health strategy, with the aim of integrating such resources into healthcare. Whilst there are numerous mHealth projects going on in Ghana, there is little evidence of doctors using such devices in their practice. A qualitative study was undertaken in Korle-Bu Teaching Hospital. Random sampling was used to identify House Officers, who engaged in semi-structured interviews. Interviews were recorded, transcribed and analysed using thematic content analysis. Consent was gained from all participants and the University of Leeds granted ethical approval. The results demonstrate that current House Officers began using smartphones and tablets at various stages during medical school. Their use has increased since qualification. Although the overall use has increased, some staff remain resistant to the use of smartphones and tablets. In the future, the integration of smartphones and tablets into medical practice can be improved by integration with the medical curriculum and accepted practice. House Officers are routinely using smartphones and tablets to assist them in their daily practice. The use is informal and is peer led. Whilst they bring many benefits, there are issues, which need to be addressed. In Korle-Bu Teaching Hospital integrating smartphone and tablet use into practice is feasible and would prove beneficial.

Joint sealant study

DOT National Transportation Integrated Search

1987-09-01

ADOT has approximately 550 lane miles of jointed portland cement pavement under its jurisdiction. The current practice is to saw and seal the joints at the time of construction and reseal the joints under a rehabilitation project. ADOT does not speci...

Damage detection of an in-service condensation pipeline joint

NASA Astrophysics Data System (ADS)

Briand, Julie; Rezaei, Davood; Taheri, Farid

2010-04-01

The early detection of damage in structural or mechanical systems is of vital importance. With early detection, the damage may be repaired before the integrity of the system is jeopardized, resulting in monetary losses, loss of life or limb, and environmental impacts. Among the various types of structural health monitoring techniques, vibration-based methods are of significant interest since the damage location does not need to be known beforehand, making it a more versatile approach. The non-destructive damage detection method used for the experiments herein is a novel vibration-based method which uses an index called the EMD Energy Damage Index, developed with the aim of providing improved qualitative results compared to those methods currently available. As part of an effort to establish the integrity and limitation of this novel damage detection method, field testing was completed on a mechanical pipe joint on a condensation line, located in the physical plant of Dalhousie University. Piezoceramic sensors, placed at various locations around the joint were used to monitor the free vibration of the pipe imposed through the use of an impulse hammer. Multiple damage progression scenarios were completed, each having a healthy state and multiple damage cases. Subsequently, the recorded signals from the healthy and damaged joint were processed through the EMD Energy Damage Index developed in-house in an effort to detect the inflicted damage. The proposed methodology successfully detected the inflicted damages. In this paper, the effects of impact location, sensor location, frequency bandwidth, intrinsic mode functions, and boundary conditions are discussed.

76 FR 53935 - Delegation Authority for the Office of the Chief Financial Officer

Federal Register 2010, 2011, 2012, 2013, 2014

2011-08-30

... Office of the Chief Financial Officer AGENCY: Office of the Secretary, HUD. ACTION: Notice of delegation of authority. SUMMARY: In this notice, the Secretary of HUD, pursuant to the Chief Financial Officers Act of 1990 (CFO Act), which established the position of the Chief Financial Officer within HUD, is...

41 CFR 109-25.104 - Acquisition of office furniture and office machines.

Code of Federal Regulations, 2011 CFR

2011-01-01

... furniture and office machines. 109-25.104 Section 109-25.104 Public Contracts and Property Management... furniture and office machines. DOE offices and designated contractors shall make the determination as to whether requirements can be met through the utilization of DOE owned furniture and office machines. ...

The application of a feasible exercise training program in the office setting.

PubMed

Shariat, Ardalan; Lam, Eddie T C; Kargarfard, Mehdi; Tamrin, Shamsul B M; Danaee, Mahmoud

2017-01-01

Previous research support the claim that people who work in offices and sit for a long time are particularly prone to musculoskeletal disorders. The main objective of this paper is to introduce an exercise training program designed to decrease muscle stiffness and pain that can be performed in the office setting. Forty healthy office workers (age: 28±5.3 years old; body mass: 87.2±10.2 kg; height: 1.79±0.15 m) apart from suffering from any sub-clinical symptoms of muscle and joint stiffness, and who had at least two years of experience in office work were chosen and randomly assigned to either an experimental group (n = 20) or a control group (n = 20). The experimental group performed the exercise training program three times a week for 11 weeks. The Cornell Musculoskeletal Discomfort Questionnaire was used to measure the pain levels in the neck, shoulders, and lower back areas. The Borg CR-10 Scale was used to measure their perceived exertion when doing the exercises, and a goniometer was used to measure the changes in range of motion (ROM) of the neck, hips, knees, and shoulders. The overall results indicated that the exercise program could significantly (p < 0.05) reduce the neck, shoulders, and lower back pains of the participants in the exercise group while those in the control group showed no improvement in those pains. There were significant (p < 0.05) increases in the ROM of the hips, the neck, both knees and shoulders in the exercise group. Participants showed significant (p = 0.011) decreases in perceived exertion scores after the exercises. The exercise training program designed in this study not only can effectively reduce neck, shoulders, and lower back pains, but also can improve the ROM or flexibility of the office workers.

Minimizing lighting power density in office rooms equipped with Anidolic Daylighting Systems

DOE Office of Scientific and Technical Information (OSTI.GOV)

Linhart, Friedrich; Scartezzini, Jean-Louis

2010-04-15

Electric lighting is responsible for up to one third of an office building's electricity needs. Making daylight more available in office buildings can not only contribute to significant energy savings but also enhance the occupants' performance and wellbeing. Anidolic Daylighting Systems (ADS) are one type of very effective facade-integrated daylighting systems. All south-facing office rooms within the LESO solar experimental building in Lausanne (Switzerland) are equipped with a given type of ADS. A recent study has shown that these offices' occupants are highly satisfied with their lighting environment. The most energy-efficient south-facing offices have a lighting power density of lessmore » than 5W/m{sup 2}. The lighting situation within these ''best practice''-offices has been assessed using the lighting simulation software RELUX Vision. Because this lighting situation is very much appreciated by the occupants, it was used as a starting point for developing even more energy-efficient office lighting designs. Two new lighting designs, leading to lighting power densities of 3.9W/m{sup 2} and 3W/m{sup 2}, respectively, have been suggested and simulated with RELUX Vision. Simulation results have shown that the expected performances of these new systems are comparable to that of the current lighting installation within the ''best practice''-offices or even better. These simulation results have been confirmed during experiments on 20 human subjects in a test office room recently set up within the LESO building. This article gives engineers, architects and light planers valuable information and ideas on how to design energy-efficient and comfortable electric lighting systems in office rooms with abundant access to daylight. (author)« less

Chief Information Officer > Library

Science.gov Websites

Skip to main content (Press Enter). Toggle navigation Chief Information Officer Search Search Chief Information Officer: Search Search Chief Information Officer: Search Chief Information Officer U.S. Department of Defense Chief Information Officer Home About DoD CIO Bios Organization DCIO C4&IIC DCIO IE

Modeling thermal and irradiation-induced swelling effects on the integrity of Ti 3 SiC 2 /SiC joints

DOE Office of Scientific and Technical Information (OSTI.GOV)

Nguyen, Ba Nghiep; Henager, Charles H.; Kurtz, Richard J.

Previously, results for CVD-SiC joints created using solid state displacement reactions to form a dual-phase SiC/MAX phase irradiated at 800°C and 5 dpa indicated some extent of cracking in the joint and along the CVD-SiC/joint interface. This paper elucidates the origin of cracking by thermomechanical modeling combined with irradiation-induced swelling effects using a continuum damage approach with support of micromechanical modeling. Three irradiation temperatures (400°C, 500°C and 800°C) are considered assuming experimental irradiation doses in a range leading to saturation swelling in SiC. The analyses indicate that a SiC/MAX joint heated to 400°C fails during irradiation-induced swelling at this temperaturemore » while it experiences some damage after being heated to 500°C and irradiated at the same temperature. However, it fails during cooling from 500°C to room temperature. The joint experiences minor damage when heated to and irradiated at 800°C but does not fail after cooling. The prediction agrees with the experimental findings available for this case.« less

76 FR 53939 - Order of Succession for the Office of the Chief Financial Officer

Federal Register 2010, 2011, 2012, 2013, 2014

2011-08-30

... Office of the Chief Financial Officer AGENCY: Office of the Secretary, HUD. ACTION: Notice of Order of... Chief Financial Officer. This Order of Succession supersedes all prior Orders of Succession for the Office of the Chief Financial Officer. DATES: Effective Date: August 19, 2011. FOR FURTHER INFORMATION...

Office Careers. Teacher's Guide. Pre-Vocational Office Education.

ERIC Educational Resources Information Center

Powell, Theressa

This guide is intended for use in providing competency-based prevocational instruction in business and office occupations programs. Addressed in the individual units are the following topics: career awareness (career planning, decision making, and educational planning); personal assessment; the business and office cluster (bookkeeper, word…

Medicare Information Office

Science.gov Websites

Agencies Alaska Pioneer Homes Behavioral Health Office of Children's Services Office of the Commissioner Office of Substance Misuse and Addiction Prevention Finance & Management Services Health Care Services Juvenile Justice Public Assistance Public Health Seniors & Disabilities Services Boards

Army National Guard and U.S. Army Reserve: Promotion of Commissioned Officers and Warrant Officers Other Than General Officers

DTIC Science & Technology

2001-10-24

Notification of Selection for Promotion—Officers Assigned to Control Group (Dual Component), page 57 Figure 4–15: Memorandum Format for Notification of... Group Standby Reserve (Active Status List) officers. (3) USAR officers released from AD in the grade of COL and below, and not under the jurisdiction...Control Group (Officer Active Duty Obligor) (OADO) or under administrative control of the Control Group (OADO) with concurrent assignment to a Reserve

Force Structure. Joint Seabasing Would Benefit from a Comprehensive Management Approach and Rigorous Experimentation before Services Spend Billions on New Capabilities

DTIC Science & Technology

2007-01-01

results could be compromised. While service development efforts tied to seabasing are approaching milestones for investment decisions , it is...estimates for joint seabasing options are developed and made transparent to DOD and Congress, decision makers will not be able to evaluate the cost...Integrate Service Initiatives 10 DOD Has Not Developed a Joint Experimentation Campaign Plan to Inform Decisions About Joint Seabasing 16 Timeframe for

Annual Report 2008 -- Office of the Chief Financial Officer (OCFO)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Fernandez, Jeffrey

2008-12-22

It is with great pleasure that I present to you the 2008 Chief Financial Officer's Annual Report. The data included in this report has been compiled from the Budget Office, the Controller, Procurement and Property Management and the Sponsored Projects Office. Also included are some financial comparisons with other DOE Laboratories and a glossary of commonly used acronyms.

Integrating nutrition services into primary care

PubMed Central

Crustolo, Anne Marie; Kates, Nick; Ackerman, Sari; Schamehorn, Sherri

2005-01-01

PROBLEM BEING ADDRESSED Nutrition services can have an important role in prevention and management of many conditions seen by family physicians, but access to these services in primary care is limited. OBJECTIVE OF PROGRAM To integrate specialized nutrition services into the offices of family physicians in Hamilton, Ont, in order to improve patient access to those services, to expand the range of problems seen in primary care, and to increase collaboration between family physicians and registered dietitians. PROGRAM DESCRIPTION Registered dietitians were integrated into the offices of 80 family physicians. In collaboration with physicians, they assessed, treated, and consulted on a variety of nutrition-related problems. A central management team coordinated the dietitians’ activities. CONCLUSION Registered dietitians can augment and complement family physicians’ activities in preventing, assessing, and treating nutrition-related problems. This model of shared care can be applied to integrating other specialized services into primary care practices. PMID:16805083

41 CFR 101-25.104 - Acquisition of office furniture and office machines.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 41 Public Contracts and Property Management 2 2010-07-01 2010-07-01 true Acquisition of office furniture and office machines. 101-25.104 Section 101-25.104 Public Contracts and Property Management... PROCUREMENT 25-GENERAL 25.1-General Policies § 101-25.104 Acquisition of office furniture and office machines...

76 FR 13182 - Science Advisory Board Staff Office; Notification of a Public Meeting of the Science Advisory...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-03-10

... results of fact-finding activities conducted as part of a study of science integration supporting EPA... ENVIRONMENTAL PROTECTION AGENCY [FRL-9278-1] Science Advisory Board Staff Office; Notification of a Public Meeting of the Science Advisory Board Committee on Science Integration for Decision Making...

77 FR 29361 - Scientific Integrity: Statement of Policy

Federal Register 2010, 2011, 2012, 2013, 2014

2012-05-17

... DEPARTMENT OF LABOR Scientific Integrity: Statement of Policy AGENCY: Office of the Secretary... Integrity Policy, originally published April 17, 2012. FOR FURTHER INFORMATION CONTACT: E. Christi Cunningham, Associate Assistant Secretary for Regulatory Policy, U.S. Department of Labor, 200 Constitution...

20 CFR 402.55 - Materials available at district offices and branch offices.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 20 Employees' Benefits 2 2010-04-01 2010-04-01 false Materials available at district offices and branch offices. 402.55 Section 402.55 Employees' Benefits SOCIAL SECURITY ADMINISTRATION AVAILABILITY OF INFORMATION AND RECORDS TO THE PUBLIC § 402.55 Materials available at district offices and branch offices. (a) Materials available for inspection...

Polarimetry Data Reduction at the Joint Astronomy Centre

NASA Astrophysics Data System (ADS)

Cavanagh, B.; Jenness, T.; Currie, M. J.

2005-12-01

ORAC-DR is an automated data-reduction pipeline that has been used for on-line data reduction for infrared imaging, spectroscopy, and integral-field-unit data at UKIRT; sub-millimetre imaging at JCMT; and infrared imaging at AAT. It allows for real-time automated infrared and submillmetre imaging polarimetry and spectropolarimetry data reduction. This paper describes the polarimetry data-reduction pipelines used at the Joint Astronomy Centre, highlighting their flexibility and extensibility.

Joint swelling

MedlinePlus

... of arthritis caused by buildup of uric acid crystals in a joint ( gout ) Arthritis caused by wear ... osteoarthritis ) Arthritis caused by buildup of calcium-type crystals in joints ( pseudogout ) Disorder that involves arthritis and ...

The joint flanker effect and the joint Simon effect: On the comparability of processes underlying joint compatibility effects.

PubMed

Dittrich, Kerstin; Bossert, Marie-Luise; Rothe-Wulf, Annelie; Klauer, Karl Christoph

2017-09-01

Previous studies observed compatibility effects in different interference paradigms such as the Simon and flanker task even when the task was distributed across two co-actors. In both Simon and flanker tasks, performance is improved in compatible trials relative to incompatible trials if one actor works on the task alone as well as if two co-actors share the task. These findings have been taken to indicate that actors automatically co-represent their co-actor's task. However, recent research on the joint Simon and joint flanker effect suggests alternative non-social interpretations. To which degree both joint effects are driven by the same underlying processes is the question of the present study, and it was scrutinized by manipulating the visibility of the co-actor. While the joint Simon effect was not affected by the visibility of the co-actor, the joint flanker effect was reduced when participants did not see their co-actors but knew where the co-actors were seated. These findings provide further evidence for a spatial interpretation of the joint Simon effect. In contrast to recent claims, however, we propose a new explanation of the joint flanker effect that attributes the effect to an impairment in the focusing of spatial attention contingent on the visibility of the co-actor.

Designing and validating the joint battlespace infosphere

NASA Astrophysics Data System (ADS)

Peterson, Gregory D.; Alexander, W. Perry; Birdwell, J. Douglas

2001-08-01

Fielding and managing the dynamic, complex information systems infrastructure necessary for defense operations presents significant opportunities for revolutionary improvements in capabilities. An example of this technology trend is the creation and validation of the Joint Battlespace Infosphere (JBI) being developed by the Air Force Research Lab. The JBI is a system of systems that integrates, aggregates, and distributes information to users at all echelons, from the command center to the battlefield. The JBI is a key enabler of meeting the Air Force's Joint Vision 2010 core competencies such as Information Superiority, by providing increased situational awareness, planning capabilities, and dynamic execution. At the same time, creating this new operational environment introduces significant risk due to an increased dependency on computational and communications infrastructure combined with more sophisticated and frequent threats. Hence, the challenge facing the nation is the most effective means to exploit new computational and communications technologies while mitigating the impact of attacks, faults, and unanticipated usage patterns.

Models for joint ophthalmology-optometry patient management.

PubMed

Kim, John J; Kim, Christine M

2011-07-01

American Academy of Ophthalmology (AAO) and American Society of Cataract and Refractive Surgery (ASCRS) presented a joint position paper in February 2000 declaring that they do not support routine comanagement of patients with the optometrists. American Optometric Association and American Academy of Optometry quickly responded in support of AAO and ASCRS. All four entities did not preclude legitimate and proper comanagement arrangements. Since that time, the pattern of practice has changed, requiring us to rethink our positions. This paper is written to provide a possible model for the ophthalmology-optometry practice management in ophthalmic surgeries including refractive surgery. Since the publication of the Joint Position Paper, the concept of comanagement has faded and a new model of integrated management has evolved. This has occurred as the changes in the employment pattern of the ophthalmic practice have incorporated optometrists into its fold. This evolution allowed ophthalmic and optometric community to co-exist and thrive to provide better patient care.

A Modelling Method of Bolt Joints Based on Basic Characteristic Parameters of Joint Surfaces

NASA Astrophysics Data System (ADS)

Yuansheng, Li; Guangpeng, Zhang; Zhen, Zhang; Ping, Wang

2018-02-01

Bolt joints are common in machine tools and have a direct impact on the overall performance of the tools. Therefore, the understanding of bolt joint characteristics is essential for improving machine design and assembly. Firstly, According to the experimental data obtained from the experiment, the stiffness curve formula was fitted. Secondly, a finite element model of unit bolt joints such as bolt flange joints, bolt head joints, and thread joints was constructed, and lastly the stiffness parameters of joint surfaces were implemented in the model by the secondary development of ABAQUS. The finite element model of the bolt joint established by this method can simulate the contact state very well.

Physician offices marketing: assessing patients' views of office visits.

PubMed

Emmett, Dennis; Chandra, Ashish

2010-01-01

Physician offices often lack the sense of incorporating appropriate strategies to make their facilities as marketer of their services. The patient experience at a physician's office not only incorporates the care they receive from the physician but also the other non-healthcare related aspects, such as the behavior of non-health professionals as well as the appearance of the facility itself. This paper is based on a primary research conducted to assess what patients assess from a physician office visit.

A Parallel and Distributed Processing Model of Joint Attention, Social-Cognition and Autism

PubMed Central

Mundy, Peter; Sullivan, Lisa; Mastergeorge, Ann M.

2009-01-01

Scientific Abstract The impaired development of joint attention is a cardinal feature of autism. Therefore, understanding the nature of joint attention is a central to research on this disorder. Joint attention may be best defined in terms of an information processing system that begins to develop by 4–6 months of age. This system integrates the parallel processing of internal information about one’s own visual attention with external information about the visual attention of other people. This type of joint encoding of information about self and other attention requires the activation of a distributed anterior and posterior cortical attention network. Genetic regulation, in conjunction with self-organizing behavioral activity guides the development of functional connectivity in this network. With practice in infancy the joint processing of self-other attention becomes automatically engaged as an executive function. It can be argued that this executive joint-attention is fundamental to human learning, as well as the development of symbolic thought, social-cognition and social-competence throughout the life span. One advantage of this parallel and distributed processing model of joint attention (PDPM) is that it directly connects theory on social pathology to a range of phenomenon in autism associated with neural connectivity, constructivist and connectionist models of cognitive development, early intervention, activity-dependent gene expression, and atypical ocular motor control. PMID:19358304

INTEGRATED PETROLEUM ENVIRONMENTAL CONSORTIUM (IPEC)

EPA Science Inventory

EPA GRANT NUMBER: R827015
Title: Integrated Petroleum Environmental Consortium (IPEC)
Investigator: Kerry L. Sublette
Institution: University of Tulsa
EPA Project Officer: S. Bala Krishnan
Project Period: October 1, 19...

Detection of fastener loosening in simple lap joint based on ultrasonic wavefield imaging

NASA Astrophysics Data System (ADS)

Gooda Sahib, M. I.; Leong, S. J.; Chia, C. C.; Mustapha, F.

2017-12-01

Joints in aero-mechanical structures are critical elements that ensure the structural integrity but they are prone to damages. Inspection of such joints that have no prior baseline data is really challenging but it can be possibly done using the Ultrasonic Propagation Imager (UPI). The feasibility of applying UPI for detection of loosened fastener is investigated in this study. A simple lap joint specimen made by connecting two pieces of 2.5mm thick SAE304 stainless steel plates using five M6 screws and nuts has been used in this study. All fasteners are tightened to 10Nm but one of them is completely loosened to simulate the damage. The wavefield data is processed into ultrasonic wavefield propagation video and a series of spectral amplitude images. The spectral images showed noticeable amplitude difference at the loosened fastener, hence confirmed the feasibility of using UPI for structural joints inspection. A simple contrast maximization method is also introduced to improve the result.

12 CFR 1710.17 - Certification of disclosures by chief executive officer and chief financial officer.

Code of Federal Regulations, 2010 CFR

2010-01-01

... officer and chief financial officer. 1710.17 Section 1710.17 Banks and Banking OFFICE OF FEDERAL HOUSING... Corporate Practices and Procedures § 1710.17 Certification of disclosures by chief executive officer and chief financial officer. The chief executive officer and the chief financial officer of an Enterprise...

Development and Application of an Integrated Approach toward NASA Airspace Systems Research

NASA Technical Reports Server (NTRS)

Barhydt, Richard; Fong, Robert K.; Abramson, Paul D.; Koenke, Ed

2008-01-01

The National Aeronautics and Space Administration's (NASA) Airspace Systems Program is contributing air traffic management research in support of the 2025 Next Generation Air Transportation System (NextGen). Contributions support research and development needs provided by the interagency Joint Planning and Development Office (JPDO). These needs generally call for integrated technical solutions that improve system-level performance and work effectively across multiple domains and planning time horizons. In response, the Airspace Systems Program is pursuing an integrated research approach and has adapted systems engineering best practices for application in a research environment. Systems engineering methods aim to enable researchers to methodically compare different technical approaches, consider system-level performance, and develop compatible solutions. Systems engineering activities are performed iteratively as the research matures. Products of this approach include a demand and needs analysis, system-level descriptions focusing on NASA research contributions, system assessment and design studies, and common systemlevel metrics, scenarios, and assumptions. Results from the first systems engineering iteration include a preliminary demand and needs analysis; a functional modeling tool; and initial system-level metrics, scenario characteristics, and assumptions. Demand and needs analysis results suggest that several advanced concepts can mitigate demand/capacity imbalances for NextGen, but fall short of enabling three-times current-day capacity at the nation s busiest airports and airspace. Current activities are focusing on standardizing metrics, scenarios, and assumptions, conducting system-level performance assessments of integrated research solutions, and exploring key system design interfaces.

Doctor-office collaborative care for pediatric behavioral problems: a preliminary clinical trial.

PubMed

Kolko, David J; Campo, John V; Kilbourne, Amy M; Kelleher, Kelly

2012-03-01

To evaluate the feasibility and clinical benefits of an integrated mental health intervention (doctor-office collaborative care [DOCC]) vs enhanced usual care (EUC) for children with behavioral problems. Cases were assigned to DOCC and EUC using a 2:1 randomization schedule that resulted in 55 DOCC and 23 EUC cases. Preassessment was conducted in 4 pediatric primary care practices. Postassessment was conducted in the pediatric or research office. Doctor-office collaborative care was provided in the practice; EUC was initiated in the office but involved a facilitated referral to a local mental health specialist. Of 125 referrals (age range, 5-12 years), 78 children participated. Children and their parents were assigned to receive DOCC or EUC. Preassessment diagnostic status was evaluated using the Schedule for Affective Disorders and Schizophrenia for School-aged Children. Preassessment and 6-month postassessment ratings of behavioral and emotional problems were collected from parents using the Vanderbilt Attention-Deficit/Hyperactivity Disorder Diagnostic Parent Rating Scale, as well as individualized goal achievement ratings forms. At discharge, care managers and a diagnostic evaluator completed the Clinical Global Impression Scale, and pediatricians and parents completed satisfaction and study feedback measures. Group comparisons found significant improvements for DOCC over EUC in service use and completion, behavioral and emotional problems, individualized behavioral goals, and overall clinical response. Pediatricians and parents were highly satisfied with DOCC. The feasibility and clinical benefits of DOCC for behavioral problems support the integration of collaborative mental health services for common mental disorders in primary care.

Strategic Communication Joint Integrating Concept. Version 1.0

DTIC Science & Technology

2009-10-07

information and knowledge on complex social communication systems, to include the characteristics of various media channels and the intentions... social or media networks.  Including strategic communication instructions as an integral part of the main body of an operation order or plan...information and knowledge on complex social communication systems, to include the characteristics of various media SC-004.2T Access

THROW AWAY THE BOX: RETHINKING LOGISTICS INTEGRATION BETWEEN SPECIAL OPERATIONS AND GENERAL PURPOSE FORCES

DTIC Science & Technology

2015-02-13

Ft Carson CO; Logistics Officer, 10th Special Forces Group ( SFG ) Airborne (A) and Combined Joint Special Operations Task Force (CJSOTF) Arabian...ENDURING FREEDOM; Commander 7th SFG (A) Group Support Battalion, Eglin AFB, FL for two years and deployed to Afghanistan twice serving as the

Rebuilding the Joint Airborne Forward Air Controller: Analyzing Joint Air Tasking Doctrine’s Ability to Facilitate Effective Air-Ground Integration

DTIC Science & Technology

2013-12-13

Air Controller: An Analysis of Mosquito Operations in Korea Since the dawn of powered flight, airpower visionaries and land warfare stalwarts have...properly employed, this aid from the sky in assisting during an attack by our own troops or in repelling an attack or counterattack by the enemy greatly...proliferation of airborne Forward Air Controllers. The Mosquito Airborne Tactical Air Coordinator (TAC(A)) role, known as FAC(A) in modern joint

Mutual coordination strengthens the sense of joint agency in cooperative joint action.

PubMed

Bolt, Nicole K; Poncelet, Evan M; Schultz, Benjamin G; Loehr, Janeen D

2016-11-01

Philosophers have proposed that when people coordinate their actions with others they may experience a sense of joint agency, or shared control over actions and their effects. However, little empirical work has investigated the sense of joint agency. In the current study, pairs coordinated their actions to produce tone sequences and then rated their sense of joint agency on a scale ranging from shared to independent control. People felt more shared than independent control overall, confirming that people experience joint agency during joint action. Furthermore, people felt stronger joint agency when they (a) produced sequences that required mutual coordination compared to sequences in which only one partner had to coordinate with the other, (b) held the role of follower compared to leader, and (c) were better coordinated with their partner. Thus, the strength of joint agency is influenced by the degree to which people mutually coordinate with each other's actions. Copyright © 2016 Elsevier Inc. All rights reserved.

77 FR 67063 - VA Directive 0005 on Scientific Integrity

Federal Register 2010, 2011, 2012, 2013, 2014

2012-11-08

... policies that: Foster a culture of transparency, integrity, and ethical behavior in the development and... provided to the VA's Office of Inspector General (OIG), the Office of Government Ethics, and Congress. VA...: VA has amended Directive 0005, ] 5.b., to state that ``VA policy provides an ethical and accountable...

Single, Integrated, Service-Centric Model of Military Health System Governance

DTIC Science & Technology

and effectiveness of operational medical support. According to the Joint Concept for Health Services (JCHS), the need for integrated medical support...that keeps pace with the operational agility and organizational flexibility requirements to support globally integrated operations is clear. This

Joint Chiefs of Staff > Leadership

Science.gov Websites

Senior Enlisted Advisor Joint Staff History Joint Staff Inspector General Joint Staff Structure Origin of J8 | Force Structure, Resources & Assessment Contact Joint Staff Structure Joint Staff Organizational Chart Joint Chiefs of Staff Links Home Today in DOD About DOD Top Issues News Photos/Videos

Pediatric office emergencies.

PubMed

Fuchs, Susan

2013-10-01

Pediatricians regularly see emergencies in the office, or children that require transfer to an emergency department, or hospitalization. An office self-assessment is the first step in determining how to prepare for an emergency. The use of mock codes and skill drills make office personnel feel less anxious about medical emergencies. Emergency information forms provide valuable, quick information about complex patients for emergency medical services and other physicians caring for patients. Furthermore, disaster planning should be part of an office preparedness plan. Copyright © 2013 Elsevier Inc. All rights reserved.

Experiences on Licensed Offices of Surveying and Cadastre (losc) in Adana, Turkey

NASA Astrophysics Data System (ADS)

Yalcin, G.; Ates, H. B.

2016-10-01

Modern cadastre means to integrate the registration of the real estates with the data of the other related activities such as taxation, mortgage, valuation, land-use, land cover,..etc. In Turkey cadastral technical activities were carried out by General Directorate of Land Registry and Cadastre until 2005. But then cadastre sustainment services were transferred to private sector according to "Law on Cadastre" technical parts of initial cadastre and according to the Law on "Licensed Engineers of Surveying and Cadastre and Offices". In this article services of Licensed Offices of Surveying and Cadastre (LOSCs) are presented and the experiences in Adana are shared.

Tourniquet Effectiveness When Placed Over the Joint Service Lightweight Integrated Suit Technology.

PubMed

Peponis, Thomas; Ramly, Elie; Roth, Kym A; King, David R

2016-01-01

Chemical, biological, radiological, and nuclear threats (CBRNs) are uncommon; however, Special Operations Forces (SOF) are likely at the highest risk for tactical exposure. In the event of exposure, SOF will rely on the Joint Service Lightweight Integrated Suit Technology (JSLIST) for survival. Doctrine dictates that a tourniquet should be applied over the JSLIST after a severe limb injury with hemorrhage. There is no evidence in the literature that the Combat Application Tourniquet (C-A-T), which is currently the most widely available tourniquet on the battlefield, can effectively occlude arterial blood flow when applied over the JSLIST. We hypothesized that C-A-T application over the JSLIST would be ineffective at occluding arterial blood flow in the lower extremity. Following institutional review board approval, 20 healthy volunteers were recruited to participate. All volunteers wore the G3 Combat Pant and they donned the JSLIST. First, an operating room pneumatic tourniquet (gold standard) was applied in the proximal thigh and inflated to 300mmHg. Distal arterial interrogation was performed by examination of distal pulses and noninvasive arterial plethysmography wave-form analysis. After a 1-hour recovery period, the C-A-T was applied and tightened. A double routing technique was used, with three 180° turns of the windlass. The same distal interrogation followed. Half of the volunteers had the pneumatic tourniquet applied first, and the other half had the C-A-T applied first. All volunteers had palpable pulses at baseline despite a wide range in volunteer body mass index. Distal pulses were absent in all volunteers following inflation of the pneumatic tourniquet as well as tightening of the C-A-T. The observed difference between the mean amplitude of plethysmographic waveforms was not different. The C-A-T effectively occludes arterial flow in the lower extremity, even when applied over the JSLIST. This finding supports existing military doctrine for tourniquet

A clamping force measurement system for monitoring the condition of bolted joints on railway track joints and points

NASA Astrophysics Data System (ADS)

Tesfa, B.; Horler, G.; Thobiani, F. Al; Gu, F.; Ball, A. D.

2012-05-01

Many industrial structures associated with railway infrastructures rely on a large number of bolted joint connections to ensure safe and reliable operation of the track and trackside furniture. Significant sums of money are spent annually to repair the damage caused by bolt failures and to maintain the integrity of bolted structures. In the UK, Network Rail (the organization responsible for rail network maintenance and safety) conducts corrective and preventive maintenance manually on 26,000 sets of points (each having approximately 30 bolted joints per set), in order to ensure operational success and safety for the travelling public. Such manual maintenance is costly, disruptive, unreliable and prone to human error. The aim of this work is to provide a means of automatically measuring the clamping force of each individual bolted joint, by means of an instrumented washer. This paper describes the development of a sensor means to be used in the washer, which satisfies the following criteria. Sense changes in the clamping force of the joint and report this fact. Provide compatibility with the large dynamic range of clamping force. Satisfy the limitations in terms of physical size. Provide the means to electronically interface with the washer. Provide a means of powering the washer in situ. Provide a solution at an acceptable cost. Specifically the paper focuses on requirements 1, 2 and 3 and presents the results that support further development of the proposed design and the realization of a pre-prototype system. In the paper, various options for the force sensing element (strain gage, capacitor, piezo-resistive) have been compared, using design optimization techniques. As a result of the evaluation, piezo-resistive sensors in concert with a proprietary force attenuation method, have been found to offer the best performance and cost trade-off The performance of the novel clamping force sensor has been evaluated experimentally and the results show that a smart washer

Signaling networks in joint development

PubMed Central

Salva, Joanna E.; Merrill, Amy E.

2016-01-01

Here we review studies identifying regulatory networks responsible for synovial, cartilaginous, and fibrous joint development. Synovial joints, characterized by the fluid-filled synovial space between the bones, are found in high-mobility regions and are the most common type of joint. Cartilaginous joints unite adjacent bones through either a hyaline cartilage or fibrocartilage intermediate. Fibrous joints, which include the cranial sutures, form a direct union between bones through fibrous connective tissue. We describe how the distinct morphologic and histogenic characteristics of these joint classes are established during embryonic development. Collectively, these studies reveal that despite the heterogeneity of joint strength and mobility, joint development throughout the skeleton utilizes common signaling networks via long-range morphogen gradients and direct cell-cell contact. This suggests that different joint types represent specialized variants of homologous developmental modules. Identifying the unifying aspects of the signaling networks between joint classes allows a more complete understanding of the signaling code for joint formation, which is critical to improving strategies for joint regeneration and repair. PMID:27859991

75 FR 23152 - Board of Directors of Federal Home Loan Bank System Office of Finance

Federal Register 2010, 2011, 2012, 2013, 2014

2010-05-03

...Governed by the Federal Housing Finance Agency's (FHFA) regulations, the Federal Home Loan Bank System's (Bank System) Office of Finance issues debt (``consolidated obligations'') as agent for the Federal Home Loan Banks (Banks) on which the Banks are jointly and severally liable and publishes combined financial reports on the Banks so that members of the Bank System, investors in the consolidated obligations, and other interested parties can assess the strength of the Bank System that stands behind them. The Office of Finance (OF) is governed by a board of directors, the composition and functions of which are determined by FHFA's regulations. FHFA's experience with the Bank System and with the OF's combined financial reports during the recent period of market stress suggests that the OF and the Bank System could benefit from a reconstituted board and strengthened audit committee. This regulation is intended to achieve that end.

Fatigue Damage Monitoring of a Composite Step Lap Joint Using Distributed Optical Fibre Sensors

PubMed Central

Wong, Leslie; Chowdhury, Nabil; Wang, John; Chiu, Wing Kong; Kodikara, Jayantha

2016-01-01

Over the past few decades, there has been a considerable interest in the use of distributed optical fibre sensors (DOFS) for structural health monitoring of composite structures. In aerospace-related work, health monitoring of the adhesive joints of composites has become more significant, as they can suffer from cracking and delamination, which can have a significant impact on the integrity of the joint. In this paper, a swept-wavelength interferometry (SWI) based DOFS technique is used to monitor the fatigue in a flush step lap joint composite structure. The presented results will show the potential application of distributed optical fibre sensor for damage detection, as well as monitoring the fatigue crack growth along the bondline of a step lap joint composite structure. The results confirmed that a distributed optical fibre sensor is able to enhance the detection of localised damage in a structure. PMID:28773496

Effect of lateralized design on muscle and joint reaction forces for reverse shoulder arthroplasty.

PubMed

Liou, William; Yang, Yang; Petersen-Fitts, Graysen R; Lombardo, Daniel J; Stine, Sasha; Sabesan, Vani J

2017-04-01

Manufacturers of reverse shoulder arthroplasty (RSA) implants have recently designed innovative implants to optimize performance in rotator cuff-deficient shoulders. These advancements are not without tradeoffs and can have negative biomechanical effects. The objective of this study was to develop an integrated finite element analysis-kinematic model to compare the muscle forces and joint reaction forces (JRFs) of 3 different RSA designs. A kinematic model of a normal shoulder joint was adapted from the Delft model and integrated with the well-validated OpenSim shoulder model. Static optimizations then allowed for calculation of the individual muscle forces, moment arms, and JRFs relative to net joint moments. Three-dimensional computer models of 3 RSA designs-humeral lateralized design (HLD), glenoid lateralized design, and Grammont design-were integrated, and parametric studies were performed. Overall, there were decreases in deltoid and rotator cuff muscle forces for all 3 RSA designs. These decreases were greatest in the middle deltoid of the HLD model for abduction and flexion and in the rotator cuff muscles under both internal rotation and external rotation. The JRFs in abduction and flexion decreased similarly for all RSA designs compared with the normal shoulder model, with the greatest decrease seen in the HLD model. These findings demonstrate that the design characteristics implicit in these modified RSA prostheses result in mechanical differences most prominently seen in the deltoid muscle and overall JRFs. Further research using this novel integrated model can help guide continued optimization of RSA design and clinical outcomes. Copyright © 2017 Journal of Shoulder and Elbow Surgery Board of Trustees. Published by Elsevier Inc. All rights reserved.

Negotiating roadblocks to IDS-physician equity joint ventures.

PubMed

Dubow, S F; Benoff, M

1998-09-01

Integrated delivery systems (IDSs) may find that forming an equity joint venture relationship with a physician group practice is the best way to integrate physicians into their networks. IDSs have a choice between two basic equity structures: affiliated group practice, in which a management services organization (MSO) handles all practice management infrastructure and the physician group is a physician-only organization; and integrated group practice, in which the physician group encompasses both the physician practice and the administrative infrastructure. The choice of equity structure and how it should be implemented hinge on several legal issues, including the existence of a corporate-practice-of-medicine statute in the IDS's state, compliance with the Federal antikickback statute and Stark laws, and various issues regarding the IDS's tax-exempt status. IDSs also should consider pragmatic issues, particularly those associated with aligning the economic incentives of the two partners.

3 CFR - Designation of Officers of the Office of Personnel Management To Act as Director of the Office of...

Code of Federal Regulations, 2013 CFR

2013-01-01

... 3 The President 1 2013-01-01 2013-01-01 false Designation of Officers of the Office of Personnel Management To Act as Director of the Office of Personnel Management Presidential Documents Other Presidential... from this memorandum in designating an acting Director. Sec. 3. Prior Memorandum Superseded. This...

Joint Force Quarterly. Number 14, Winter 1996-97

DTIC Science & Technology

1997-03-01

of the Joint Chiefs of Staff by the Institute for National Strategic Studies , National De- fense University, to promote understanding of the integrated...4219 e-mail: JFQ1@ndu.edu Internet: http://www.dtic.mil/doctrine Hans Binnendijk Director Institute for National Strategic Studies Editor-in-Chief... Studies Consulting Editor Calvin B. Kelley Copy Editor ISSN 1070–0692 March 1997 0314Pre 5/6/97 10:52 AM Page 3 competitors or new global powers

14 CFR 313.7 - Integration with environmental procedures.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 14 Aeronautics and Space 4 2010-01-01 2010-01-01 false Integration with environmental procedures. 313.7 Section 313.7 Aeronautics and Space OFFICE OF THE SECRETARY, DEPARTMENT OF TRANSPORTATION....7 Integration with environmental procedures. (a) In proceedings in which an environmental impact...

A Mentoring Opportunity: A Joint Effort in Writing Letters of Recommendation.

PubMed

Master, Zubin

2017-01-01

Integrity in writing letters of recommendation is important to academic research because it is an influential criterion used pervasively in peer review. While research in the integrity of recommendation letters has concentrated on contents of the letter, bias, and reliability, few have questioned the process of letter writing. Here, I argue that letter writing should be a joint opportunity between mentor/supervisor/advisor and trainee. It results in more compelling letters, may prevent errors and the use of biased language, and serves as an excellent mentoring opportunity promoting self-reflection.

[Joint dislocation after total knee arthroplasty as an ankle fracture complication. Case report].

PubMed

Hrubina, M; Skoták, M

2012-01-01

Joint dislocation after total knee arthroplasty is a rare complication. It is described as the result of ligamentous instability. Here we report the case of an 82-year-old women who underwent primary total knee arthroplasty (TKA) for advanced primary grade III gonarthrosis. At 3 post-operative months the joint was stable and painless, with radiographic evidence of good TKA alignment and integration. At 4 months the patient suffered injury to the ankle involving a bimalleolar fracture and damage to knee soft tissues. The fracture was surgically treated. Subsequently, dorsal tibial dislocation was manifested. This was managed by individual intramedullary nail arthrodesis. At 8 months following the operation, the knee condition was satisfactory, with rigid arthrodesis and leg shortening of 4 cm. The patient was satisfied because she was free of pain and able to walk. Arthrodesis of the knee joint with an individual nail is an option for a definitive treatment of TKA instability. When other joints, such as ankle or hip joints, are injured, it is recommended to pay attention also to any TKA implanted previously because of potential development of instability or infection.

Structural characterization of a first-generation articulated-truss joint for space crane application

NASA Technical Reports Server (NTRS)

Sutter, Thomas R.; Wu, K. Chauncey; Riutort, Kevin T.; Laufer, Joseph B.; Phelps, James E.

1992-01-01

A first-generation space crane articulated-truss joint was statically and dynamically characterized in a configuration that approximated an operational environment. The articulated-truss joint was integrated into a test-bed for structural characterization. Static characterization was performed by applying known loads and measuring the corresponding deflections to obtain load-deflection curves. Dynamic characterization was performed using modal testing to experimentally determine the first six mode shapes, frequencies, and modal damping values. Static and dynamic characteristics were also determined for a reference truss that served as a characterization baseline. Load-deflection curves and experimental frequency response functions are presented for the reference truss and the articulated-truss joint mounted in the test-bed. The static and dynamic experimental results are compared with analytical predictions obtained from finite element analyses. Load-deflection response is also presented for one of the linear actuators used in the articulated-truss joint. Finally, an assessment is presented for the predictability of the truss hardware used in the reference truss and articulated-truss joint based upon hardware stiffness properties that were previously obtained during the Precision Segmented Reflector (PSR) Technology Development Program.

Are Pressure Time Integral and Cumulative Plantar Stress Related to First Metatarsophalangeal Joint Pain? Results From a Community-Based Study.

PubMed

Rao, Smita; Douglas Gross, K; Niu, Jingbo; Nevitt, Michael C; Lewis, Cora E; Torner, James C; Hietpas, Jean; Felson, David; Hillstrom, Howard J

2016-09-01

To examine the relationship between plantar stress over a step, cumulative plantar stress over a day, and first metatarsophalangeal (MTP) joint pain among older adults. Plantar stress and first MTP pain were assessed within the Multicenter Osteoarthritis Study. All included participants were asked if they had pain, aching, or stiffness at the first MTP joint on most days for the past 30 days. Pressure time integral (PTI) was quantified as participants walked on a pedobarograph, and mean steps per day were obtained using an accelerometer. Cumulative plantar stress was calculated as the product of regional PTI and mean steps per day. Quintiles of hallucal and second metatarsal PTI and cumulative plantar stress were generated. The relationship between predictors and the odds ratio of first MTP pain was assessed using a logistic regression model. Feet in the quintile with the lowest hallux PTI had 2.14 times increased odds of first MTP pain (95% confidence interval [95% CI] 1.42-3.25, P < 0.01). Feet in the quintile with the lowest second metatarsal PTI had 1.50 times increased odds of first MTP pain (95% CI 1.01-2.23, P = 0.042). Cumulative plantar stress was unassociated with first MTP pain. Lower PTI was modestly associated with increased prevalence of frequent first MTP pain at both the hallux and second metatarsal. Lower plantar loading may indicate the presence of an antalgic gait strategy and may reflect an attempt at pain avoidance. The lack of association with cumulative plantar stress may suggest that patients do not limit their walking as a pain-avoidance mechanism. © 2016, American College of Rheumatology.

Are Pressure Time Integral and Cumulative Plantar Stress Related to First Metatarsophalangeal Joint Pain? Results From a Community-Based Study

PubMed Central

RAO, SMITA; GROSS, K. DOUGLAS; NIU, JINGBO; NEVITT, MICHAEL C.; LEWIS, CORA E.; TORNER, JAMES C.; HIETPAS, JEAN; FELSON, DAVID; HILLSTROM, HOWARD J.

2017-01-01

Objective To examine the relationship between plantar stress over a step, cumulative plantar stress over a day, and first metatarsophalangeal (MTP) joint pain among older adults. Methods Plantar stress and first MTP pain were assessed within the Multicenter Osteoarthritis Study. All included participants were asked if they had pain, aching, or stiffness at the first MTP joint on most days for the past 30 days. Pressure time integral (PTI) was quantified as participants walked on a pedobarograph, and mean steps per day were obtained using an accelerometer. Cumulative plantar stress was calculated as the product of regional PTI and mean steps per day. Quintiles of hallucal and second metatarsal PTI and cumulative plantar stress were generated. The relationship between predictors and the odds ratio of first MTP pain was assessed using a logistic regression model. Results Feet in the quintile with the lowest hallux PTI had 2.14 times increased odds of first MTP pain (95% confidence interval [95% CI] 1.42–3.25, P < 0.01). Feet in the quintile with the lowest second metatarsal PTI had 1.50 times increased odds of first MTP pain (95% CI 1.01–2.23, P = 0.042). Cumulative plantar stress was unassociated with first MTP pain. Conclusion Lower PTI was modestly associated with increased prevalence of frequent first MTP pain at both the hallux and second metatarsal. Lower plantar loading may indicate the presence of an antalgic gait strategy and may reflect an attempt at pain avoidance. The lack of association with cumulative plantar stress may suggest that patients do not limit their walking as a pain-avoidance mechanism. PMID:26713755

Novel joint cupping clinical maneuver for ultrasonographic detection of knee joint effusions.

PubMed

Uryasev, Oleg; Joseph, Oliver C; McNamara, John P; Dallas, Apostolos P

2013-11-01

Knee effusions occur due to traumatic and atraumatic causes. Clinical diagnosis currently relies on several provocative techniques to demonstrate knee joint effusions. Portable bedside ultrasonography (US) is becoming an adjunct to diagnosis of effusions. We hypothesized that a US approach with a clinical joint cupping maneuver increases sensitivity in identifying effusions as compared to US alone. Using unembalmed cadaver knees, we injected fluid to create effusions up to 10 mL. Each effusion volume was measured in a lateral transverse location with respect to the patella. For each effusion we applied a joint cupping maneuver from an inferior approach, and re-measured the effusion. With increased volume of saline infusion, the mean depth of effusion on ultrasound imaging increased as well. Using a 2-mm cutoff, we visualized an effusion without the joint cupping maneuver at 2.5 mL and with the joint cupping technique at 1 mL. Mean effusion diameter increased on average 0.26 cm for the joint cupping maneuver as compared to without the maneuver. The effusion depth was statistically different at 2.5 and 7.5 mL (P < .05). Utilizing a joint cupping technique in combination with US is a valuable tool in assessing knee effusions, especially those of subclinical levels. Effusion measurements are complicated by uneven distribution of effusion fluid. A clinical joint cupping maneuver concentrates the fluid in one recess of the joint, increasing the likelihood of fluid detection using US. © 2013 Elsevier Inc. All rights reserved.

76 FR 67472 - Order of Succession for the Office of the Chief Information Officer

Federal Register 2010, 2011, 2012, 2013, 2014

2011-11-01

...: Juanita Galbreath, Deputy Chief Information Officer for Cyber Security and Privacy, Office of the Chief...) Deputy Chief Information Officer, for IT Operations; (3) Deputy Chief Information Officer, for Cyber...

Shear fracture of jointed steel plates of bolted joints under impact load

NASA Astrophysics Data System (ADS)

Daimaruya, M.; Fujiki, H.; Ambarita, H.; Kobayashi, H.; Shin, H.-S.

2013-07-01

The present study is concerned with the development of a fracture criterion for the impact fracture of jointed steel plates of bolted joints used in a car body, which contributes to crash simulations by CAE. We focus our attention on the shear fracture of the jointed steel plates of lap-bolted joints in the suspension of a car under impact load. Members of lap-bolted joints are modelled as a pair of steel plates connected by a bolt. One of the plates is a specimen subjected to plastic deformation and fracture and the other is a jig subjected to elastic deformation only. Three kinds of steel plate specimens are examined, i.e., a common steel plate with a tensile strength of 270 MPa and high tensile strength steel plates of 440 and 590 MPa used for cars. The impact shear test was performed using the split Hopkinson bar technique for tension impact, together with the static test using a universal testing machine INSTRON 5586. The behaviour of the shear stress and deformation up to rupture taking place in the joint was discussed. The obtained results suggest that a stress-based fracture criterion may be developed for the impact fracture of jointed steel plates of a lap-bolted joint.

Perceived office environments and occupational physical activity in office-based workers.

PubMed

Sawyer, A; Smith, L; Ucci, M; Jones, R; Marmot, A; Fisher, A

2017-06-01

Individuals in office-based occupations have low levels of physical activity but there is little research into the socio-ecological correlates of workplace activity. To identify factors contributing to office-based workers' perceptions of the office environment and explore cross-sectional relationships between these factors and occupational physical activity. Participants in the Active Buildings study reported perceptions of their office environment using the Movement at Work Survey. A principal component analysis (PCA) was conducted on survey items. A sub-sample wore the ActivPAL3TM accelerometer for ≥3 workdays to measure occupational step count, standing, sitting and sit-to-stand transitions. Linear regression analyses assessed relationships between environmental perceptions and activity. There were 433 participants, with accelerometer data available for 115 participants across 11 organ izations. The PCA revealed four factors: (i) perceived distance to office destinations, (ii) perceived office aesthetics and comfort, (iii) perceived office social environment and (iv) perceived management discouragement of unscheduled breaks. Younger participants perceived office destinations as being closer to their desk. Younger and female participants perceived more positive office social environments; there were no other socio-demographic differences. Within the sub-sample with accelerometer data, perceived discouragement of breaks by management was related to occupational step count/hour (B = -64.5; 95% CI -109.7 to -19.2). No other environmental perceptions were related to activity or sitting. Perceived managerial discouragement of breaks could be related to meaningful decreases in occupational step count. Future research should aim to elucidate the role of the workplace socio-cultural environment in occupational walking, with a focus on the role of management. © The Author 2017. Published by Oxford University Press on behalf of the Society of Occupational Medicine. All

40. BOW SPACES (YN OFFICES, AYN OFFICES & DECK SHOP, ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

40. BOW SPACES (YN OFFICES, AYN OFFICES & DECK SHOP, LAUNDRY & BOS'N STORES), WITH HATCH TO PAINT LOCKER AT LEFT. - U.S. Coast Guard Cutter WHITE LUPINE, U.S. Coast Guard Station Rockland, east end of Tillson Avenue, Rockland, Knox County, ME

An office chair to influence the sitting behavior of office workers.

PubMed

Goossens, R H M; Netten, M P; Van der Doelen, B

2012-01-01

Since the introduction of ergonomic guidelines in the design of office chairs, a lot of effort has been put in designing these office chairs accordingly. Because these features all have to be adjusted in different ways (mostly a knob underneath the seat surface), and because every office chair offers different solutions, often users do not use all of the adjustments, and thus do not use the office chair an the optimal ergonomic way. The aim of this paper is to study the influence of feedback on sitting habits of office workers in a field test during 4 weeks. 40 office workers were selected for this test (13 male, 27 female). They were divided in three groups. A control group, a group that received a sitting instruction and a group that received sitting instruction and feedback on their posture every hour that they sit. The results show that there is an effect in average increase in basic posture on both the group that received instruction and the group that received feedback. This effect decreases over time. There was no effect in the control group.

High Energy Physics Exascale Requirements Review. An Office of Science review sponsored jointly by Advanced Scientific Computing Research and High Energy Physics, June 10-12, 2015, Bethesda, Maryland

DOE Office of Scientific and Technical Information (OSTI.GOV)

Habib, Salman; Roser, Robert; Gerber, Richard

The U.S. Department of Energy (DOE) Office of Science (SC) Offices of High Energy Physics (HEP) and Advanced Scientific Computing Research (ASCR) convened a programmatic Exascale Requirements Review on June 10–12, 2015, in Bethesda, Maryland. This report summarizes the findings, results, and recommendations derived from that meeting. The high-level findings and observations are as follows. Larger, more capable computing and data facilities are needed to support HEP science goals in all three frontiers: Energy, Intensity, and Cosmic. The expected scale of the demand at the 2025 timescale is at least two orders of magnitude — and in some cases greatermore » — than that available currently. The growth rate of data produced by simulations is overwhelming the current ability of both facilities and researchers to store and analyze it. Additional resources and new techniques for data analysis are urgently needed. Data rates and volumes from experimental facilities are also straining the current HEP infrastructure in its ability to store and analyze large and complex data volumes. Appropriately configured leadership-class facilities can play a transformational role in enabling scientific discovery from these datasets. A close integration of high-performance computing (HPC) simulation and data analysis will greatly aid in interpreting the results of HEP experiments. Such an integration will minimize data movement and facilitate interdependent workflows. Long-range planning between HEP and ASCR will be required to meet HEP’s research needs. To best use ASCR HPC resources, the experimental HEP program needs (1) an established, long-term plan for access to ASCR computational and data resources, (2) the ability to map workflows to HPC resources, (3) the ability for ASCR facilities to accommodate workflows run by collaborations potentially comprising thousands of individual members, (4) to transition codes to the next-generation HPC platforms that will be available at

State-of-the-lagoon reports as vehicles of cross-disciplinary integration.

PubMed

Zaucha, Jacek; Davoudi, Simin; Slob, Adriaan; Bouma, Geiske; van Meerkerk, Ingmar; Oen, Amy Mp; Breedveld, Gijs D

2016-10-01

An integrative approach across disciplines is needed for sustainable lagoon and estuary management as identified by integrated coastal zone management. The ARCH research project (Architecture and roadmap to manage multiple pressures on lagoons) has taken initial steps to overcome the boundaries between disciplines and focus on cross-disciplinary integration by addressing the driving forces, challenges, and problems at various case study sites. A model was developed as a boundary-spanning activity to produce joint knowledge and understanding. The backbone of the model is formed by the interaction between the natural and human systems, including economy and governance-based subsystems. The model was used to create state-of-the-lagoon reports for 10 case study sites (lagoons and estuarine coastal areas), with a geographical distribution covering all major seas surrounding Europe. The reports functioned as boundary objects to build joint knowledge. The experiences related to the framing of the model and its subsequent implementation at the case study sites have resulted in key recommendations on how to address the challenges of cross-disciplinary work required for the proper management of complex social-ecological systems such as lagoons, estuarine areas, and other land-sea regions. Cross-disciplinary integration is initially resource intensive and time consuming; one should set aside the required resources and invest efforts at the forefront. It is crucial to create engagement among the group of researchers by focusing on a joint, appealing overall concept that will stimulate cross-sectoral thinking and focusing on the identified problems as a link between collected evidence and future management needs. Different methods for collecting evidence should be applied including both quantitative (jointly agreed indicators) and qualitative (narratives) information. Cross-disciplinary integration is facilitated by functional boundary objects. Integration offers important

Physiological loading of joints prevents cartilage degradation through CITED2

PubMed Central

Leong, Daniel J.; Li, Yong H.; Gu, Xiang I.; Sun, Li; Zhou, Zuping; Nasser, Philip; Laudier, Damien M.; Iqbal, Jameel; Majeska, Robert J.; Schaffler, Mitchell B.; Goldring, Mary B.; Cardoso, Luis; Zaidi, Mone; Sun, Hui B.

2011-01-01

Both overuse and disuse of joints up-regulate matrix metalloproteinases (MMPs) in articular cartilage and cause tissue degradation; however, moderate (physiological) loading maintains cartilage integrity. Here, we test whether CBP/p300-interacting transactivator with ED-rich tail 2 (CITED2), a mechanosensitive transcriptional coregulator, mediates this chondroprotective effect of moderate mechanical loading. In vivo, hind-limb immobilization of Sprague-Dawley rats up-regulates MMP-1 and causes rapid, histologically detectable articular cartilage degradation. One hour of daily passive joint motion prevents these changes and up-regulates articular cartilage CITED2. In vitro, moderate (2.5 MPa, 1 Hz) intermittent hydrostatic pressure (IHP) treatment suppresses basal MMP-1 expression and up-regulates CITED2 in human chondrocytes, whereas high IHP (10 MPa) down-regulates CITED2 and increases MMP-1. Competitive binding and transcription assays demonstrate that CITED2 suppresses MMP-1 expression by competing with MMP transactivator, Ets-1 for its coactivator p300. Furthermore, CITED2 up-regulation in vitro requires the p38δ isoform, which is specifically phosphorylated by moderate IHP. Together, these studies identify a novel regulatory pathway involving CITED2 and p38δ, which may be critical for the maintenance of articular cartilage integrity under normal physical activity levels.—Leong, D. J., Li, Y. H., Gu, X. I., Sun, L., Zhou, Z., Nasser, P., Laudier, D. M., Iqbal, J., Majeska, R. J., Schaffler, M. B., Goldring, M. B., Cardoso, L., Zaidi, M., Sun, H. B. Physiological loading of joints prevents cartilage degradation through CITED2. PMID:20826544

Thermal Cycling Fatigue in DIPs Mounted with Eutectic Tin-Lead Solder Joints in Stub and Gullwing Geometries

NASA Technical Reports Server (NTRS)

Winslow, J. W.; Silveira, C. de

1993-01-01

It has long been known that solder joints under mechanical stress are subject to failure. In early electronic systems, such failures were avoided primarily by avoiding the use of solder as a mechanical structural component. The rule was first to make sound wire connections that did not depend mechanically on solder, and only then to solder them. Careful design and miniaturization in modern electronic systems limits the mechanical stresses exerted on solder joints to values less than their yield points, and these joints have become integral parts of the mechanical structures. Unfortunately, while these joints are strong enough when new, they have proven vulnerable to fatigue failures as they age. Details of the fatigue process are poorly understood, making predictions of expected lifetimes difficult.

76 FR 5391 - Office of Biotechnology Activities, Office of Science Policy, Office of the Director

Federal Register 2010, 2011, 2012, 2013, 2014

2011-01-31

... Activities, Office of Science Policy, Office of the Director Amended Notice of Meeting Notice is hereby given of a change in the meeting of the National Science Advisory Board for Biosecurity (NSABB), February... Federal Advisory Committee Policy. [FR Doc. 2011-2022 Filed 1-28-11; 8:45 am] BILLING CODE 4140-01-P ...

Software Intensive Systems

DTIC Science & Technology

2006-07-01

Architect, Developer and Platform Evangelism • Microsoft Dynamic Systems Initiative-- John Wilson, Architect Windows Management • Windows Lifecycle...Presentations • Aegis--Reuben Pitts & CDR John Ailes, Program Executive Office, Integrated Warfare Systems • Long Term Mine Reconnaissance (LMRS)--CAPT...Paul Imes • Joint Tactical Radio System (JTRS)--Richard North, JPEO JTRS & Leonard Schiavone , MITRE • Single Integrated Air Picture (SIAP)--CAPT

17 CFR 200.11 - Headquarters Office-Regional Office relationships.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 17 Commodity and Securities Exchanges 2 2010-04-01 2010-04-01 false Headquarters Office-Regional... General Organization § 200.11 Headquarters Office—Regional Office relationships. (a)(1) Division and... responsibility to the Commission for the overall development, policy and technical guidance, and policy direction...

Department of Defense, Office of Inspector General Semiannual Report to the Congress, 1 April - 30 September 1984.

DTIC Science & Technology

1984-11-29

Support, and Property Construction, Mediterranean, Madrid, Commander Third Fleet, Pear Harbor. HI Spain T40083 Multilocation Audit of Table of Equip- 5...and Interest 2 Office, Bay St Louis, MS AcontBlacsaso 3 etebr 93X40044L Unannounced Audit of Disbursing 5/3/84 T20103 Multilocation Audit of the...udte Fot isbring, At h rn n er 8 Support Aivits . Naval Air Statio, T20063 Multilocation Audit of the Marine Corps 6/5/84 Jacksonville. FlI. joint

Early, asymptomatic stage of degenerative joint disease in canine hip joints.