Ambulatory surgery center joint ventures involving tax-exempt entities.

PubMed

Becker, S; Pristave, R J; McConnell, W

1999-01-01

This article provides an overview of the tax-exempt related issues for ambulatory surgery center joint ventures involving tax-exempt entities. The article analyzes the key points of analysis of the guidance released by the IRS, in particular General Counsel Memorandum 39862, Revenue Ruling 98-15, and Redlands Surgical Services v. Commissioner of the Internal Revenue Service. These key points include whether the venture results in private inurement to insiders and whether the venture furthers the charitable purposes of the tax-exempt entity. The article also provides practical guidance to analyze the documents and structure of the joint venture to ensure compliance with the IRS guidance. These practical considerations include, among other things, whether the charitable purposes of the tax-exempt entity are clearly expressed in the documents and whether the tax-exempt entity has sufficient control over the joint venture to ensure the charitable purposes are being adhered to.

Joint University Program for Air Transportation Research, 1987

NASA Technical Reports Server (NTRS)

Morrell, Frederick R. (Compiler)

1989-01-01

The research conducted during 1987 under the NASA/FAA sponsored Joint University Program for Air Transportation Research is summarized. The Joint University Program is a coordinated set of 3 grants sponsored by NASA-Langley and the FAA, one each with the MIT, Ohio Univ., and Princeton Univ. Completed works, status reports, and annotated bibliographies are presented for research topics, which include computer science, guidance and control theory and practice, aircraft performance, flight dynamics, and applied experimental psychology. An overview of the year's activities for each university is also presented.

Program Validation: Four Case Studies. A Brief Report on Four Projects and Their Experiences Before the Joint Dissemination Review Panel.

ERIC Educational Resources Information Center

Taylor, Nancy, Ed.

In an effort to clearly illustrate the most effective approach when seeking Joint Dissemination Review Panel (JDRP) validation, this report describes four different educational programs. A program involving prekindergarten special students, and a project entailing a systems approach for disadvantaged elementary school students, were awarded…

Transfer and Joint Programs - do they Work?

NASA Astrophysics Data System (ADS)

Chapman, P.; Chang, P.; Wu, D.

2013-12-01

With the increased interest in internationalization, many western universities have been working to attract students from China and other Asian countries. Texas A&M University has had a collaborative Ph.D. program with Ocean University, Qingdao, China since 2008. Chinese students spend their first one or two years in Qingdao, then transfer to TAMU to complete their coursework and carry out research. The program has so far produced 6 PhDs and one MS degree, and another 14 students are registered through the program. We anticipate sending U.S. students to China on a reciprocal basis, although the lack of Chinese-speaking U.S. students is an issue. Additionally, the Memorandum of Understanding has led to joint research projects between the two universities, with publications in top journals. Novel aspects of the program include joint funding by the U.S. and China, co-chairing graduate committees by both university faculties, interviewing students in Qingdao before they are accepted by TAMU, and initial studies in one country and then transfer to the other. Such programs require 'heroes' on each side to set up and continue the program who trust each other, as well as support from the upper administration. Even with such support, outside influences and different cultures can affect the effectiveness of the program.

75 FR 6250 - ITS Joint Program Office; Intelligent Transportation Systems Program Advisory Committee; Notice...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-02-08

... DEPARTMENT OF TRANSPORTATION ITS Joint Program Office; Intelligent Transportation Systems Program... the Intelligent Transportation Systems (ITS) Program Advisory Committee (ITSPAC). The Web conference... Transportation on all matters relating to the study, development, and implementation of intelligent...

Joint University Program for Air Transportation Research, 1983

NASA Technical Reports Server (NTRS)

Morrell, Frederick R. (Compiler)

1987-01-01

The research conducted during 1983 under the NASA/FAA sponsored Joint University Program for Air Transportation Research is summarized. The material was presented at a conference held at the Federal Aviation Administration Technical Center, Altantic City, New Jersey, December 16, 1983. The Joint University Program is a coordinated set of three grants sponsored by NASA Langley Research Center and the Federal Aviation Administration, one each with the Massachusetts Institute of Technology, Ohio University, and Princeton University. Completed works, status reports, and bibliographies are presented for research topics, which include navigation, guidance, control, and display concepts. An overview of the year's activities for each of the universities is also presented.

Predictive value of bone scintigraphy for the detection of joint involvement in Behçet's disease: Dermatologists' perspectives.

PubMed

Seo, Jimyung; Lee, Minseok; Choi, Min Ju; Zheng, Zhenlong; Cho, Arthur; Bang, Dongsik; Kim, Do Young

2015-01-01

Behçet's disease (BD) is a multisystemic inflammatory disease with articular involvement. Non-specific arthralgia without objective signs of arthritis, such as swelling or effusion, is common in such patients. Thus, an accurate diagnosis of joint involvement may be challenging for dermatologists. To evaluate the validity of (99m)Tc-methylene diphosphonate (Tc-99m-MDP) bone scintigraphy for joint involvement assessment in patients with BD. In 211 patients with BD who had scintigraphic evaluations due to joint symptoms, agreement between bone scintigraphy findings and clinically evaluated joint complaints was retrospectively assessed using Cohen's kappa (κ) statistic. A patient subset (n = 104) showing agreement between joint complaints and scintigraphy results was re-evaluated by a rheumatologist to determine the level of diagnostic specificity attained by combining bone scintigraphy with clinical examinations of dermatologists. The total kappa value (211 patients) was 0.604, indicating fair agreement between joint complaints and scintigraphy results. Individual analysis of eleven joint categories revealed statistically significant correlations for wrist (κ = 0.677), shoulder (κ = 0.661), and foot joints (κ = 0.618). Of the 104 referrals to a rheumatologist, 95 (91.34%) were confirmed as having BD-associated articular involvement. Joint acral areas (e.g., foot, hand, wrist and shoulder) that had the highest kappa value correlations also ranked highest in diagnostic specificity. Bone scintigraphy presents a simple and useful option for dermatologists to assess joint involvement in BD patients, especially for specific anatomic sites.

Joint Task Force on Undergraduate Physics Programs

NASA Astrophysics Data System (ADS)

This session will focus on the guidelines and recommendations being developed by the APS/AAPT Joint Task Force on Undergraduate Physics Programs. J-TUPP is studying how undergraduate physics programs might better prepare physics majors for diverse careers. The guidelines and recommendations will focus on curricular content, flexible tracks, pedagogical methods, research experiences and internships, the development of professional skills, and enhanced advising and mentoring for all physics majors.

Joint University Program for Air Transportation Research, 1988-1989

NASA Technical Reports Server (NTRS)

Morrell, Frederick R. (Compiler)

1990-01-01

The research conducted during 1988 to 1989 under the NASA/FAA-sponsored Joint University Program for Air Transportation Research is summarized. The Joint University Program is a coordinated set of three grants sponsored by NASA Langley Research Center and the Federal Aviation Administration, one each with the Massachusetts Institute of Technology, Ohio University, and Princeton University. Completed works, status reports, and annotated bibliographies are presented for research topics, which include computer science, guidance and control theory and practice, aircraft performance, flight dynamics, and applied experimental psychology. An overview of the year's activities for each university is also presented.

Toward a joint health and disease management program. Toronto hospitals partner to provide system leadership.

PubMed

Macleod, Anne Marie; Gollish, Jeffrey; Kennedy, Deborah; McGlasson, Rhona; Waddell, James

2009-01-01

The Joint Health and Disease Management Program in the Toronto Central Local Health Integration Network (TC LHIN) is envisioned as a comprehensive model of care for patients with hip and knee arthritis. It includes access to assessment services, education, self-management programs and other treatment programs, including specialist care as needed. As the first phase of this program, the hospitals in TC LHIN implemented a Hip and Knee Replacement Program to focus on improving access and quality of care, coordinating services and measuring wait times for patients waiting for hip or knee replacement surgery. The program involves healthcare providers, consumers and constituent hospitals within TC LHIN. The approach used for this program involved a definition of governance structure, broad stakeholder engagement to design program elements and plans for implementation and communication to ensure sustainability. The program and approach were designed to provide a model that is transferrable in its elements or its entirety to other patient populations and programs. Success has been achieved in creating a single wait list, developing technology to support referral management and wait time reporting, contributing to significant reductions in waits for timely assessment and treatment, building human resource capacity and improving patient and referring physician satisfaction with coordination of care.

Joint Services Electronics Program.

DTIC Science & Technology

1985-03-31

COJNRACT ON GRANT NuuSER(.j M. Tinkham N00014-84-K-0465 S. PeRFOR MING ORGANIZATION NAME AND ADORESS 𔃺. PROGRAM EL.,IT. P0OJECT. TASA Division of...2 7 R.W. Brockett DlAG29-83-K-0040 TW.osbr AFosR- 81-7401 R.W. Brockett -: DE -FGD2-84-EEw4O1 5B T.T. Wui sER xB-2-02144-l W. Paul JOINT SERVICES...0465, NSF DMR-81-08327 and SERI Subcontract XB-2-02144-1 of DOE Prime Contract DE -AC-02-83-CHI0093; Research Unit 2 (former #3). During this period we

Joint Exercise Program: DOD Needs to Take Steps to Improve the Quality of Funding Data

DTIC Science & Technology

2017-02-01

technology systems—the Joint Training Information Management System (JTIMS) and the Execution Management System—to manage the execution of the Joint...Exercise Program, but does not have assurance that funding execution data in the Execution Management System are reliable. JTIMS is the system of record...for the Joint Exercise Program that combatant commanders use to plan and manage their joint training exercises. GAO observed significant variation

Interphalangeal joint involvement of the big toe in gout: a rare presentation.

PubMed

Dobson, Michael; Alwahab, Yasir; Fazal, Muhammad A

2012-01-01

Atypical presentation of gout can cause diagnostic dilemmas. We report a case of gout that presented with an expansile lytic lesion involving the interphalangeal joint of the hallux, lack of a history of gout, and an associated solitary lung nodule. Magnetic resonance imaging showed an expansile destructive bony lesion with soft-tissue involvement suggestive of a possible bony metastasis. A needle biopsy was performed, and histopathologic features were diagnostic of chronic tophaceous gout.

Joint University Program for Air Transportation Research, 1991-1992

NASA Technical Reports Server (NTRS)

Morrell, Frederick R. (Compiler)

1993-01-01

This report summarizes the research conducted during the academic year 1991-1992 under the FAA/NASA sponsored Joint University Program for Air Transportation Research. The year end review was held at Ohio University, Athens, Ohio, June 18-19, 1992. The Joint University Program is a coordinated set of three grants sponsored by the Federal Aviation Administration and NASA Langley Research Center, one each with the Massachusetts Institute of Technology (NGL-22-009-640), Ohio University (NGR-36-009-017), and Princeton University (NGL-31-001-252). Completed works, status reports, and annotated bibliographies are presented for research topics, which include navigation, guidance and control theory and practice, intelligent flight control, flight dynamics, human factors, and air traffic control processes. An overview of the year's activities for each university is also presented.

The french involvement in Mars sample return program

NASA Astrophysics Data System (ADS)

Counil, J.; Bonneville, R.; Rocard, F.

The French scientific community is involved in planetary exploration for more than thirty years, at the beginning mainly in cooperation with the former USSR (e.g. missions Phobos 1 and 2 in the 80's), then through ESA (Mars - Express). In 97, following the success of the US Pathfinder mission, NASA proposed to CNES to participate to the first Mars Sample Return (MSR) mission. This idea created a tremendous excitation in the French scientific community and CNES took the decision to contribute to the MSR program. Conscious that only the very best laboratories will be selected to analyse Mars samples, the French ministry of Research has created in May 99, the CSEEM (Comité Scientifique pour l'Etude des Echantillons Martiens). This Committee mandated to coordinate the national endeavour, has released late 99 an AO aimed at implementing a national preparatory program to Mars samples analysis. More than 40 proposals have been submitted involving more than 450 scientists from around 60 French labs. Most of these proposals are interdisciplinarity jointly submitted by planetologists, mineralogists, geochemists, astrobiologists and biologists. The first stage of this preparatory program is on going and will last until mid-2003. Amongst the priorities of the preparatory program are development of dedicated instrumentation, capability of analysing as small as possible samples, measurements integration; rock-macromolecule interaction; bacteria behaviour under Martian conditions; sample transportation under quarantine conditions, etc In the late 90's, the French participation to the NASA led 2003-2005 MSR mission was mainly consisting in a sample return orbiter to be launched by an Ariane V rocket. This contribution to MSR was one of the two priorities of the CNES Mars Exploration Program named PREMIER together with the NetLander network. Unfortunately late 99, due the failure of the two NASA missions MPL and MCO, a rearchitecture of the program has been decided and the first

25 CFR 20.505 - What services are provided jointly with the Child Assistance Program?

Code of Federal Regulations, 2010 CFR

2010-04-01

... 25 Indians 1 2010-04-01 2010-04-01 false What services are provided jointly with the Child... SERVICES FINANCIAL ASSISTANCE AND SOCIAL SERVICES PROGRAMS Child Assistance How Child Assistance Funds Can Be Used § 20.505 What services are provided jointly with the Child Assistance Program? The services...

Joint MS Degree Program between the Korea University of Technology and Education and the University of Kansas

NASA Astrophysics Data System (ADS)

Dougherty, R. L.; Kim, Kwang Su

This paper provides an overview of the Joint MS Degree Program between Korea University of Technology and Education’ s (KUT) Mechatronics Department and Kansas University’ s (KU) Mechanical Engineering Department. Discussions were initiated in early 2005 which resulted in a formal agreement being approved by both parties in mid-2007. The Joint MS Degree Program is composed of 30 semester credit hours, equally split between the two universities, with the actual degree being awarded by the institution at which the thesis work is performed. Issues addressed during the development of this Joint MS Program included: joint versus dual degrees, institutional acceptance of the transfer of fifteen hours of credit for an MS degree, different admissions requirements and procedures for the two institutions, financial support of the students, faculty advisors at each institution, Graduate Directors at each institution, transcript acknowledgement of the Joint Degree, residency requirements, English speaking requirements/abilities, thesis publication allowances/requirements, and time zone differences for virtual meetings. These issues have been addressed, and the Joint MS Degree Program is functioning with a small number of students having taken advantage of the opportunity since the Program’ s inception. Future considerations are: growing the number of students in the Program, expansion to other Departments besides KU-Mechanical Engineering and KUTMechatronics, including other universities in the Program, expansion to a Joint PhD Degree Program, and stronger funding resources.

76 FR 35474 - UAW-Chrysler Technical Training Center, Technology Training Joint Programs Staff, Including On...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-06-17

...-Chrysler Technical Training Center, Technology Training Joint Programs Staff, Including On-Site Leased Workers From Cranks, O/E Learning, DBSI, IDEA, and Tonic/MVP, Detroit, MI; UAW-Chrysler Technical Training... workers and former workers of UAW-Chrysler Technical Training Center, Technology Training Joint Programs...

Reexamining Joint Chiefs of Staff Involvement in the Bay of Pigs

DTIC Science & Technology

2015-05-21

judged the guerilla plan to be unsound and had recommended improvements. Short of further assurances, the JCS had no way to confirm that the CIA had...Approved for public release; distribution is unlimited Reexamining Joint Chiefs of Staff Involvement in the Bay of Pigs A Monograph by LTC...average 1 hour per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data

The Joint Winter Runway Friction Measurement Program: NASA Perspective

NASA Technical Reports Server (NTRS)

Yager, Thomas J.

1996-01-01

Some background information is given together with the scope and objectives of the 5-year, Joint National Aeronautics & Space Administration (NASA)/Transport Canada (TC)/Federal Aviation Administration (FAA) Winter Runway Friction Measurement Program. The range of the test equipment, the selected test sites and a tentative test program schedule are described. NASA considers the success of this program critical in terms of insuring adequate ground handling performance capability in adverse weather conditions for future aircraft being designed and developed as well as improving the safety of current aircraft ground operations.

Community Involvement Training Program

EPA Pesticide Factsheets

A dynamic training conference that brings together more than 450 people from EPA and the Agency’s partners and stakeholders who plan and implement environmental community involvement, partnership, stewardship, outreach, and education programs.

75 FR 13643 - ITS Joint Program Office; Intelligent Transportation Systems Program Advisory Committee; Notice...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-03-22

... Advisory Committee; Notice of Meeting AGENCY: Research and Innovative Technology Administration, U.S... Plan; (5) Evolution of IntelliDrive\\SM\\; (6) ITS Strategic Research Plan, 2010-2014; (7) University... Technology Administration, ITS Joint Program Office, Attention: Stephen Glasscock, 1200 New Jersey Avenue, SE...

FAA/NASA Joint University Program for Air Transportation Research, 1992-1993

NASA Technical Reports Server (NTRS)

Morrell, Frederick R. (Compiler)

1994-01-01

The research conducted during the academic year 1992-1993 under the FAA/NASA sponsored Joint University Program for Air Transportation Research is summarized. The year end review was held at Ohio University, Athens, Ohio, 17-18 June 1993. The Joint University Program is a coordinated set of three grants sponsored by the Federal Aviation Administration and NASA Langley Research Center, one each with the Massachusetts Institute of Technology, Ohio University, and Princeton University. Completed works, status reports, and annotated bibliographies are presented for research topics, which include navigation, guidance, and control theory and practice, aircraft performance, human factors and air traffic management. An overview of the year's activities for each university is also presented.

Evaluating Evaluations: The Case of Parent Involvement Programs

ERIC Educational Resources Information Center

Mattingly, Doreen J.; Prislin, Radmila; McKenzie, Thomas L.; Rodriguez, James L.; Kayzar, Brenda

2002-01-01

This article analyzes 41 studies that evaluated K-12 parent involvement programs in order to assess claims that such programs are an effective means of improving student learning. It examines the characteristics of the parent involvement programs, as well as the research design, data, and analytical techniques used in program evaluation. Our…

A Program in Air Transportation Technology (Joint University Program)

NASA Technical Reports Server (NTRS)

Stengel, Robert F.

1996-01-01

The Joint University Program on Air Transportation Technology was conducted at Princeton University from 1971 to 1995. Our vision was to further understanding of the design and operation of transport aircraft, of the effects of atmospheric environment on aircraft flight, and of the development and utilization of the National Airspace System. As an adjunct, the program emphasized the independent research of both graduate and undergraduate students. Recent principal goals were to develop and verify new methods for design and analysis of intelligent flight control systems, aircraft guidance logic for recovery from wake vortex encounter, and robust flight control systems. Our research scope subsumed problems associated with multidisciplinary aircraft design synthesis and analysis based on flight physics, providing a theoretical basis for developing innovative control concepts that enhance aircraft performance and safety. Our research focus was of direct interest not only to NASA but to manufacturers of aircraft and their associated systems. Our approach, metrics, and future directions described in the remainder of the report.

An overview of the joint FAA/NASA aircraft/ground runway friction program

NASA Technical Reports Server (NTRS)

Yager, Thomas J.

1989-01-01

There is a need for information on runways which may become slippery due to various forms and types of contaminants. Experience has shown that since the beginning of all weather aircraft operations, there have been landing and aborted takeoff incidents and/or accidents each year where aircraft have either run off the end or veered off the shoulder of low friction runways. NASA Langley's Landing and Impact Dynamics Branch is involved in several research programs directed towards obtaining a better understanding of how different tire properties interact with varying pavement surface characteristics to produce acceptable performance for aircraft ground handling requirements. One such effort, which was jointly supported by not only NASA and the FAA but by several aviation industry groups including the Flight Safety Foundation, is described.

75 FR 32535 - ITS Joint Program Office; IntelliDriveSM

Federal Register 2010, 2011, 2012, 2013, 2014

2010-06-08

... DEPARTMENT OF TRANSPORTATION ITS Joint Program Office; IntelliDrive\\SM\\ Deployment Scenarios Workshop; Notice of Workshop AGENCY: Research and Innovative Technology Administration, Department of... participants to identify advantages and disadvantages of each of the draft scenarios and critical policy and...

75 FR 82132 - ITS Joint Program Office; Human Factors for IntelliDrive SM

Federal Register 2010, 2011, 2012, 2013, 2014

2010-12-29

... DEPARTMENT OF TRANSPORTATION ITS Joint Program Office; Human Factors for IntelliDrive \\SM\\ (HFID... meeting to discuss the Human Factors for IntelliDrive (HFID) program on January 6, 2011 from 10 a.m. to 5... environment. One of the supporting research programs is Human Factors for IntelliDrive (HFID), a program aimed...

A Model for a Single Unmanned Aircraft Systems (UAS) Program Office Managing Joint ISR Capabilities

DTIC Science & Technology

2017-10-01

reduction in manning from the multiple program office structure to the new single program management model. Additional information regarding this...OFFICE MANAGING JOINT ISR CAPABILITIES by Angela E. Burris A Research Report Submitted to the Faculty In Partial Fulfillment of...research paper is to answer how a single management office could provide greater agility for unmanned aircraft systems (UAS); supporting Joint concepts

Maintaining the Dialogue: Joint Involvement in a Stand-Alone CD-Rom Chinese Course.

ERIC Educational Resources Information Center

Orton, Jane

2003-01-01

Presents a stand-alone CD-Rom version of a Web-based course in Modern Standard Chinese and addresses the problem of losing opportunities for negotiation in joint involvement episodes with teachers and peers in the CD-ROM course. Demonstrates trials of a mode of self-assessment in tasks using annotated sample texts generated by other students. (VWL)

78 FR 55338 - ITS Joint Program Office; Notice of Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2013-09-10

... DEPARTMENT OF TRANSPORTATION Research and Innovative Technology Administration ITS Joint Program Office; Notice of Meeting AGENCY: Research and Innovative Technology Administration (RITA), U.S. Department of Transportation. ACTION: Notice. This notice announces the cancellation of the Connected Vehicle Planning and Policy Stakeholder Meeting. Th...

FAA/NASA Joint University Program for Air Transportation Research: 1993-1994

NASA Technical Reports Server (NTRS)

Hueschen, Richard M. (Compiler)

1995-01-01

This report summarizes the research conducted during the academic year 1993-1994 under the NASA/FAA sponsored Joint University Program for Air Transportation Research. The year end review was held at Ohio University, Athens, Ohio, July 14-15, 1994. The Joint University Program is a coordinated set of three grants sponsored by NASA Langley Research Center and the Federal Aviation Administration, one each with the Massachusetts Institute of Technology (NGL-22-009-640), Ohio University (NGR-36-009-017), and Princeton University (NGL-31-001-252). Completed works, status reports, and annotated bibliographies are presented for research topics which include navigation, guidance and control theory and practice, aircraft performance, human factors, and expert systems concepts applied to aircraft and airport operations. An overview of the year's activities for each university is also presented.

Ultrasonography and detection of subclinical joints and tendons involvements in Systemic Lupus erythematosus (SLE) patients: A cross-sectional multicenter study.

PubMed

Salliot, Carine; Denis, Amélie; Dernis, Emmanuelle; Andre, Vincent; Perdriger, Aleth; Albert, Jean-David; Mammou Mraghni, Saloua; Griffoul-Espitalier, Isabelle; Hamidou, Mohamed; Le Goff, Benoit; Joulin, Sandrine Jousse; Marhadour, Thierry; Richez, Christophe; Poursac, Nicolas; Lazaro, Estebaliz; Rist, Stéphanie; Corondan, Anca; Quinten, Clara; Martaillé, Virginie; Valéry, Antoine; Ducourau, Emilie

2018-02-15

The aims of this study in SLE population were (1) to describe ultrasonography (US) joint abnormalities, (2) to estimate the reliability of clinical swollen joint count (C-SJC) and SLEDAI (C-SLEDAI) versus US-SJC and US-SLEDAI scores, (3) to highlight specific patterns of lupus patients with Power Doppler (PD) abnormalities. For this cross-sectional multicenter study, 151 consecutive adult SLE patients were recruited. Evaluation included a clinical standardized joint assessment, B-mode and PD US of 40 joints and 26 tendons blinded for clinical examination. Reliability and agreement between clinical and B-mode US were calculated using the intraclass correlation coefficients (ICC [95% Confidence Interval]). We found a very high frequency of subclinical US abnormalities in asymptomatic patients: 85% of patients without joint symptoms had at least 1 US abnormality. Among them 46 patients (87%) had a history of joint involvement. The most frequent abnormalities were joint effusmaions (108 patients), synovial hypertrophy (SH, 109 patients) and synovitis (61 patients). Joint or tendon PD signal (grade>1) was found in 44% of patients (67/151). Synovitis were mainly located especially on MCPs and wrists. Even if reliability between clinical and grey-scale US SJC assessments was poor, reliability between clinical and US SLEDAI was good. Comparison between SLE patients with and without PD signal did not show any specific SLE pattern. US may be useful to assess joint involvement in SLE patients but did not significantly change SLEDAI score. Copyright © 2018. Published by Elsevier SAS.

Joint Assessment of Renewable Energy and Water Desalination Research Center (REWDC) Program Capabilities and Facilities In Radioactive Waste Management

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bissani, M; Fischer, R; Kidd, S

2006-04-03

The primary goal of this visit was to perform a joint assessment of the Renewable Energy and Water Desalination Center's (REWDC) program in radioactive waste management. The visit represented the fourth technical and scientific interaction with Libya under the DOE/NNSA Sister Laboratory Arrangement. Specific topics addressed during the visit focused on Action Sheet P-05-5, ''Radioactive Waste Management''. The Team, comprised of Mo Bissani (Team Lead), Robert Fischer, Scott Kidd, and Jim Merrigan, consulted with REWDC management and staff. The team collected information, discussed particulars of the technical collaboration and toured the Tajura facility. The tour included the waste treatment facility,more » waste storage/disposal facility, research reactor facility, hot cells and analytical labs. The assessment team conducted the first phase of Task A for Action Sheet 5, which involved a joint assessment of the Radioactive Waste Management Program. The assessment included review of the facilities dedicated to the management of radioactive waste at the Tourja site, the waste management practices, proposed projects for the facility and potential impacts on waste generation and management.« less

Scientific Objectives of China-Russia Joint Mars Exploration Program YH-1

NASA Astrophysics Data System (ADS)

Wu, Ji; Zhu, Guang-Wu; Zhao, Hua; Wang, Chi; Li, Lei; Sun, Yue-Qiang; Guo, Wei; Huang, Cheng-Li

2010-04-01

Compared with other planets, Mars is a planet most similar with the earth and most possible to find the extraterrestrial life on it, and therefore especially concerned about by human beings. In recent years, some countries have launched Mars probes and announced their manned Mars exploration programs. China has become the fifth country in the world to launch independently artificial satellites, and the third country able to carry out an independent manned space program. However, China is just at the beginning of deep space explorations. In 2007, China and Russia signed an agreement on a joint Mars exploration program by sending a Chinese micro-satellite Yinghuo-1 (YH-1) to the Mars orbit. Once YH-1 enters its orbit, it will carry out its own exploration, as well as the joint exploration with the Russian Phobos-Grunt probe. This paper summarizes the scientific background and objectives of YH-1 and describes briefly its payloads for realizing these scientific objectives. In addition, the main exploration tasks of YH-1 and a preliminary prospect on its exploration results are also given.

Joint University Program for Air Transportation Research, 1989-1990

NASA Technical Reports Server (NTRS)

Morrell, Frederick R. (Compiler)

1990-01-01

Research conducted during the academic year 1989-90 under the NASA/FAA sponsored Joint University Program for Air Transportation research is discussed. Completed works, status reports and annotated bibliographies are presented for research topics, which include navigation, guidance and control theory and practice, aircraft performance, human factors, and expert systems concepts applied to airport operations. An overview of the year's activities for each university is also presented.

Development and Implementation of Joint Programs in Laser Ranging and Other Space Geodetic Techniques

NASA Technical Reports Server (NTRS)

Pearlman, Michael R.; Carter, David (Technical Monitor)

2004-01-01

This progress report discusses the status and progress made in joint international programs including: 1) WEGENER; 2) Arabian Peninsula program; 3) Asia-Pacific Space Geodynamics (APSG) program; 4) the Fourteenth International Workshop on Laser Ranging; 5) the International Laser Ranging Service; and 6) current support for the NASA network.

Exploring Extension Involvement in Farm to School Program Activities

ERIC Educational Resources Information Center

Benson, Matthew C.

2014-01-01

The study reported here examined Extension professionals' involvement in farm-to-school program activities. Results of an online survey distributed to eight state Extension systems indicate that on average, Extension professionals are involved with one farm to school program activity, with most supporting school or community garden programs.…

Guidelines for Parent Involvement in Chapter 1 Programs.

ERIC Educational Resources Information Center

Weckstein, Paul

Chapter 1 is the largest federal education program in existence. It provides extra services to help low-achieving students and is targeted primarily at areas where low-income families reside. Parent involvement in designing and implementing the program is an essential part of Chapter 1. However, the parent involvement component is often not as…

Beyond Coordination: Joint Planning and Program Execution. The IHPRPT Materials Working Group

NASA Technical Reports Server (NTRS)

Stropki, Michael A.; Cleyrat, Danial A.; Clinton, Raymond G., Jr.; Rogacki, John R. (Technical Monitor)

2000-01-01

"Partnership is more than just coordination," stated then-Commander of the Air Force Research Laboratory (AFRL), Major General Dick Paul (USAF-Ret), at this year's National Space and Missile Materials Symposium. His comment referred to the example of the joint planning and program execution provided by the Integrated High Payoff Rocket Propulsion Technology (IHPRPT) Materials Working Group (IMWG). Most people agree that fiscal pressures imposed by shrinking budgets have made it extremely difficult to build upon our existing technical capabilities. In times of sufficient budgets, building advanced systems poses no major difficulties. However, with today's budgets, realizing enhanced capabilities and developing advanced systems often comes at an unaffordable cost. Overcoming this problem represents both a challenge and an opportunity to develop new business practices that allow us to develop advanced technologies within the restrictions imposed by current funding levels. Coordination of technology developments between different government agencies and organizations is a valuable tool for technology transfer. However, rarely do the newly developed technologies have direct applicability to other ongoing programs. Technology requirements are typically determined up-front during the program planning stage so that schedule risk can be minimized. The problem with this process is that the costs associated with the technology development are often borne by a single program. Additionally, the potential exists for duplication of technical effort. Changing this paradigm is a difficult process but one that can be extremely worthwhile should the right opportunity arise. The IMWG is one such example where NASA, the DoD, and industry have developed joint requirements that are intended to satisfy multiple program needs. More than mere coordination, the organizations comprising the group come together as partners, sharing information and resources, proceeding from a joint roadmap.

SEMTAP (Serpentine End Match TApe program): The Easy Way to Program Your Numerically Controlled Router for the Production of SEM Joints

Treesearch

Ronald E. Coleman

1977-01-01

SEMTAP (Serpentine End Match TApe Program) is an easy and inexpensive method of programing a numerically controlled router for the manufacture of SEM (Serpentine End Matching) joints. The SEMTAP computer program allows the user to issue commands that will accurately direct a numerically controlled router along any SEM path. The user need not be a computer programer to...

"APEC blue"--The effects and implications of joint pollution prevention and control program.

PubMed

Wang, Hongbo; Zhao, Laijun; Xie, Yujing; Hu, Qingmi

2016-05-15

To ensure good air quality in Beijing during Asia-Pacific Economic Cooperation (APEC) China 2014, Beijing and its neighboring five provinces and the associated cities were combined under the Joint Prevention and Control of Atmospheric Pollution (JPCAP) program, which implemented rigorous cooperative emission reduction measures. The program was a unique and large-scale artificial experiment that showed that such measures can achieve excellent results, and it led to the popular "APEC blue" catchphrase (i.e., Beijing's skies became blue as pollution levels decreased). This artificial experiment provided the means to effectively conduct JPCAP strategies in the future. Accordingly, our research focused on the characteristics of the six primary pollutants in Beijing. We found that the JPCAP measures directly reduced concentrations of all pollutants except O3. Through correlation analysis, we found that the band distribution of the cities with strong correlations in PM2.5 and PM10 concentrations was affected by wind conditions. Therefore, JPCAP measures should account for specific seasonal and climatic conditions. Based on cluster analysis using the results from the correlation analysis, we divided 13 cities within a 300-km radius of Beijing into different groups according to the similarity of their PM2.5 and PM10 correlation coefficients. For JPCAP measures relevant to PM2.5 and PM10, we found differences in the degrees of collaboration among cities. Therefore, depending upon the pollutant type, the JPCAP strategy should account for the cities involved, the scope of the core area, and the optimal cities to involve in the collaborative efforts based on cost-effectiveness and collaborative difficulty among the involved cities. Copyright © 2016 Elsevier B.V. All rights reserved.

The Myth of Jointness in Department of Defense Requirements and Major Acquisition Programs

DTIC Science & Technology

2013-06-01

cost between the two was the result of both the need to purchase much smaller quantities for the smaller number of Defense Department aircraft, and...service requirements to reach an agreement on the joint requirements of the new aircraft. The results were borderline disastrous. The second case study...completely wrong. The TFX did not originate as a joint program but was the result of then Secretary of Defense Robert McNamara’s decision to combine

Assessment of the Accounting and Joint Accounting/Computer Information Systems Programs.

ERIC Educational Resources Information Center

Appiah, John; Cernigliaro, James; Davis, Jeffrey; Gordon, Millicent; Richards, Yves; Santamaria, Fernando; Siegel, Annette; Lytle, Namy; Wharton, Patrick

This document presents City University of New York LaGuardia Community College's Department of Accounting and Managerial Studies assessment of its accounting and joint accounting/computer information systems programs report, and includes the following items: (1) description of the mission and goals of the Department of Accounting and Managerial…

Soils under fire: soils research and the Joint Fire Science Program.

Treesearch

Heather E. Erickson; Rachel White

2008-01-01

Soils are fundamental to a healthy and functioning ecosystem. Therefore, forest land managers can greatly benefit from a more thorough understanding of the ecological impacts of fire and fuel management activities on the vital services soils provide. We present a summary of new research on fire effects and soils made possible through the Joint Fire Science Program and...

Strategies for Involving the Private Sector in Job Training Programs.

ERIC Educational Resources Information Center

Greenwood, Katy; And Others

This two-part report describes various strategies for involving the private sector in job training programs and summarizes a study conducted with prime sponsors of Comprehensive Employment and Training Act (CETA) programs in Texas. Included in a discussion of involving the private sector in job training programs are the following topics: the new…

Family Involvement in a Hawaiian Language Immersion Program

ERIC Educational Resources Information Center

Yamauchi, Lois A.; Lau-Smith, Jo-Anne; Luning, Rebecca J. I.

2008-01-01

This study investigated the ways in which family members of students in a Hawaiian language immersion program were involved in their children's education and identified the effects of and barriers to involvement. A sociocultural theoretical approach and Epstein's framework of different types of involvement were applied. Participants included 35…

Joint swelling

MedlinePlus

... of arthritis caused by buildup of uric acid crystals in a joint ( gout ) Arthritis caused by wear ... osteoarthritis ) Arthritis caused by buildup of calcium-type crystals in joints ( pseudogout ) Disorder that involves arthritis and ...

Scope of Work for Joint W28/AGM-28A Missile Firing Program

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bice, R.A.

1964-12-04

List of principles & responsibilities of this Sandia/AEC & Air Force joint program for verifying the functionability of the W28/AGM-28A/B-52 weapon system under actual routine handling, assembling, and firing during a stockpile-to-target sequence.

Scope of Work for the Joint W53/Titan II Missile Firing Program

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1964-10-28

List of principles & responsibilities of this Sandia/AEC & Air Force joint program for verifying the functionability of the W28/AGM-28A/B-52 weapon system under actual routine handling, assembling, and firing during a stockpile-to-target sequence.

Risk management in international manned space program operations.

PubMed

Seastrom, J W; Peercy, R L; Johnson, G W; Sotnikov, B J; Brukhanov, N

2004-02-01

New, innovative joint safety policies and requirements were developed in support of the Shuttle/Mir program, which is the first phase of the International Space Station program. This work has resulted in a joint multinational analysis culminating in joint certification for mission readiness. For these planning and development efforts, each nation's risk programs and individual safety practices had to be integrated into a comprehensive and compatible system that reflects the joint nature of the endeavor. This paper highlights the major incremental steps involved in planning and program integration during development of the Shuttle/Mir program. It traces the transition from early development to operational status and highlights the valuable lessons learned that apply to the International Space Station program (Phase 2). Also examined are external and extraneous factors that affected mission operations and the corresponding solutions to ensure safe and effective Shuttle/Mir missions. c2003 Published by Elsevier Ltd.

Effectiveness of Dexamethasone Iontophoresis for Temporomandibular Joint Involvement in Juvenile Idiopathic Arthritis

PubMed Central

Mina, Rina; Melson, Paula; Powell, Stephanie; Rao, Marepalli; Hinze, Claas; Passo, Murray; Graham, T. Brent; Brunner, Hermine I.

2011-01-01

Objective Temporomandibular joint (TMJ) involvement is common in Juvenile Idiopathic Arthritis (JIA). Dexamethasone iontophoresis (DIP) uses low-grade electric currents for transdermal dexamethasone delivery into deeper anatomic structures. The purpose of this study was to assess the safety and effectiveness of DIP for the treatment of TMJ involvement in JIA, and to delineate variables that are associated with improvement after DIP. Methods Medical records of all JIA patients who underwent DIP for TMJ involvement at a larger tertiary pediatric rheumatology center from 1997 to 2011 were reviewed. DIP was performed using a standard protocol. The effectiveness of DIP was assessed by comparing the maximal inter-incisor opening (MIOTMJ) and the maximal lateral excursion (MLETMJ) before and after treatment. Results Twenty-eight patients (ages 2– 21 years) who received an average of eight DIP treatment sessions per involved TMJ were included in the analysis. Statistically significant improvement in the median MIOTMJ (p< 0.0001) was observed in 68%. The median MLETMJ (p= 0.03) improved in 69%, and resolution of TMJ pain occurred in 73% of the patients who had TMJ pain at baseline. Side effects of DIP were transient site erythema (86%), skin blister (4%), and metallic taste (4%). Improvement in TMJ range of motion from DIP is associated with lower MIOTMJ, lower MLETMJ, and absence of TMJ crepitus at baseline. Conclusion In this pilot study DIP appeared to be an effective and safe initial treatment of TMJ involvement in JIA, especially among patients with decreased TMJ measurements. Prospective controlled studies are needed. PMID:22034112

42 CFR 457.120 - Public involvement in program development.

Code of Federal Regulations, 2010 CFR

2010-10-01

... SERVICES (CONTINUED) STATE CHILDREN'S HEALTH INSURANCE PROGRAMS (SCHIPs) ALLOTMENTS AND GRANTS TO STATES Introduction; State Plans for Child Health Insurance Programs and Outreach Strategies § 457.120 Public... 42 Public Health 4 2010-10-01 2010-10-01 false Public involvement in program development. 457.120...

Designing a Citizen Involvement Program: A Guidebook for Involving Citizens in the Resolution of Environmental Issues.

ERIC Educational Resources Information Center

Howell, Robert E.; And Others

A model and supportive materials are presented for design and implementation of a program for involving citizens in decision-making concerning significant environmental issues. Chapter topics include: why citizen involvement? (potential benefits of the process); theoretical basis for citizen involvement (three fundamental perspectives underlying…

Parental Involvement in a School-Based Child Physical Activity and Nutrition Program in Southeastern United States: A Qualitative Analysis of Parenting Capacities.

PubMed

Ickes, Scott; Mahoney, Emily; Roberts, Alison; Dolan, Carrie

2016-03-01

Parent involvement varies widely in school-based programs designed to promote physical activity and healthy nutrition, yet the underlying factors that may limit parent's participation and support of learned behaviors at home are not well understood. We conducted a qualitative study that consisted of one focus group (n = 5) and 52 in-depth interviews among parents whose children participated in a school-based physical activity and nutrition (PAN) promotion program in Williamsburg, Virginia, United States. We sought to identify factors that enabled or constrained parent's support of and involvement in children's programs and to understand the underlying factors that contribute to family success in making dietary and physical activity changes at home. Parents identified their physical and mental health, self-confidence, time, and decision making as underlying "capacities" in the family health pattern. When strengthened, these capacities encourage healthful family behavior and support of school-based PAN programs. Families that succeeded in adopting lessons learned from school-based PAN programs identified four primary strategies for success: shared goals, meal planning, modeling of good behaviors, and collective activities. Interventions that aim to improve child nutrition and physical activity and the broader family health environment should consider underlying capacities of parents and the importance of joint goals and activities. © 2016 Society for Public Health Education.

15 CFR 296.8 - Joint venture agreement.

Code of Federal Regulations, 2011 CFR

2011-01-01

... OF STANDARDS AND TECHNOLOGY, DEPARTMENT OF COMMERCE NIST EXTRAMURAL PROGRAMS TECHNOLOGY INNOVATION PROGRAM General § 296.8 Joint venture agreement. NIST shall not issue a TIP award to a joint venture and... joint venture agreement has been executed by all of the joint venture members and approved by NIST. ...

15 CFR 296.8 - Joint venture agreement.

Code of Federal Regulations, 2012 CFR

2012-01-01

... OF STANDARDS AND TECHNOLOGY, DEPARTMENT OF COMMERCE NIST EXTRAMURAL PROGRAMS TECHNOLOGY INNOVATION PROGRAM General § 296.8 Joint venture agreement. NIST shall not issue a TIP award to a joint venture and... joint venture agreement has been executed by all of the joint venture members and approved by NIST. ...

15 CFR 296.8 - Joint venture agreement.

Code of Federal Regulations, 2013 CFR

2013-01-01

... OF STANDARDS AND TECHNOLOGY, DEPARTMENT OF COMMERCE NIST EXTRAMURAL PROGRAMS TECHNOLOGY INNOVATION PROGRAM General § 296.8 Joint venture agreement. NIST shall not issue a TIP award to a joint venture and... joint venture agreement has been executed by all of the joint venture members and approved by NIST. ...

15 CFR 296.8 - Joint venture agreement.

Code of Federal Regulations, 2014 CFR

2014-01-01

... OF STANDARDS AND TECHNOLOGY, DEPARTMENT OF COMMERCE NIST EXTRAMURAL PROGRAMS TECHNOLOGY INNOVATION PROGRAM General § 296.8 Joint venture agreement. NIST shall not issue a TIP award to a joint venture and... joint venture agreement has been executed by all of the joint venture members and approved by NIST. ...

15 CFR 296.8 - Joint venture agreement.

Code of Federal Regulations, 2010 CFR

2010-01-01

... OF STANDARDS AND TECHNOLOGY, DEPARTMENT OF COMMERCE NIST EXTRAMURAL PROGRAMS TECHNOLOGY INNOVATION PROGRAM General § 296.8 Joint venture agreement. NIST shall not issue a TIP award to a joint venture and... joint venture agreement has been executed by all of the joint venture members and approved by NIST. ...

Redesigning a joint replacement program using Lean Six Sigma in a Veterans Affairs hospital.

PubMed

Gayed, Benjamin; Black, Stephen; Daggy, Joanne; Munshi, Imtiaz A

2013-11-01

In April 2009, an analysis of joint replacement surgical procedures at the Richard L. Roudebush Veterans Affairs Medical Center, Indianapolis, Indiana, revealed that total hip and knee replacements incurred $1.4 million in non-Veterans Affairs (VA) care costs with an average length of stay of 6.1 days during fiscal year 2008. The Joint Replacement Program system redesign project was initiated following the Vision-Analysis-Team-Aim-Map-Measure-Change-Sustain (VA-TAMMCS) model to increase efficiency, decrease length of stay, and reduce non-VA care costs. To determine the effectiveness of Lean Six Sigma process improvement methods applied in a VA hospital. Perioperative processes for patients undergoing total joint replacement were redesigned following the VA-TAMMCS model--the VA's official, branded method of Lean Six Sigma process improvement. A multidisciplinary team including the orthopedic surgeons, frontline staff, and executive management identified waste in the current processes and initiated changes to reduce waste and increase efficiency. Data collection included a 1-year baseline period and a 20-month sustainment period. The primary endpoint was length of stay; a secondary analysis considered non-VA care cost reductions. Length of stay decreased 36% overall, decreasing from 5.3 days during the preproject period to 3.4 days during the 20-month sustainment period (P < .001). Non-VA care was completely eliminated for patients undergoing total hip and knee replacement at the Richard L. Roudebush Veterans Affairs Medical Center, producing an estimated return on investment of $1 million annually when compared with baseline cost and volumes. In addition, the volume of total joint replacements at this center increased during the data collection period. The success of the Joint Replacement Program demonstrates that VA-TAMMCS is an effective tool for Lean and Six Sigma process improvement initiatives in a surgical practice, producing a 36% sustained reduction in

Scope of Work for the Joint Mk 38 Warhead/Atlas F Missile Firing Program

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1964-11-16

List of principles & responsibilities of this Sandia/AEC & Air Force joint program for verifying the functionability of the W28/AGM-28A/B-52 weapon system under actual routine handling, assembling, and firing during a stockpile-to-target sequence.

75 FR 56651 - ITS Joint Program Office; Trucking Industry Mobility & Technology Coalition Annual Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2010-09-16

...: Beating Gridlock with a Smart Grid; U.S. DOT Truck Technology Initiatives; and State and Federal... DEPARTMENT OF TRANSPORTATION ITS Joint Program Office; Trucking Industry Mobility & Technology Coalition Annual Meeting AGENCY: Research and Innovative Technology Administration, U.S. Department of...

Exploring the Feasibility of a Consolidated Joint Civil Augmentation Program (JCAP)

DTIC Science & Technology

2009-12-01

operations. The primary focus of the program is on design and engineering, and infrastructure design and construction; however AFCAP also performs...Following is the primary research question: “Is it more cost effective for the Army, Navy, and Air Force to combine their individual CAPs into one JCAP...Force, Marines and U.S. Allies. “The program’s rationale and primary emphasis is joint-service development of a next-generation multi-role stirke

Managing Recurrence in Intraarticular Melorheostosis Involving the Knee Joint: A Case Report.

PubMed

John, Bobby; Sharma, Anirudh; Pandey, Ritesh A

2017-01-01

Melorheostosis is a rare benign sclerosing dysplasia affecting bone, which causes significant morbidity in the form of pain and restriction of joint movement. Treatment options are varied, and recurrence is common after surgical treatment. Choosing the most appropriate treatment option in the management of a recurrent case is challenging, with very little supporting evidence in literature owing to the rarity of the disease. We hereby present a case of recurrent melorheostosis involving the knee; discuss treatment options and the rationale of our treatment. We present the case of a 42-year-old female who was operated at our institution previously 7 years ago for melorheostosis of her left knee and had undergone excision of intrarticular hyperostotic masses. However, pain and limitation of motion recurred in the operated knee 4 years later, and radiographs and computed tomography revealed a mineralized mass situated behind the patella in the patellofemoral joint. She was treated with repeat open excision of the mass and put on a regimen of physiotherapy and bisphosphonates. Open excision of symptomatic hyperostotic or mineralized soft tissue masses is perhaps the favored treatment option in such cases, the other options being arthroscopic excision and total knee arthroplasty. Limited knee motion and size of the mass often make arthroscopy an unfeasible option. Total knee arthroplasty should be reserved for cases with significant flexion contractures of the knee, or where multiple excisions have failed.

Parent Couples' Coping Resources and Involvement in their Children's Intervention Program.

PubMed

Brand, Devora; Zaidman-Zait, Anat; Most, Tova

2018-07-01

Parental involvement is vital to the implementation of intervention programs for deaf and hard-of-hearing (DHH) children. The current study examined the dyadic relationships between mothers' and fathers' coping resources and their involvement in their child's intervention program. In addition, the moderating roles of parent's gender and family religiosity on the associations between coping resources and involvement were examined. Seventy Jewish couples of parents of DHH children, representing various levels of religiosity, completed questionnaires regarding involvement in their child's intervention program, child acceptance, parental self-efficacy, and perceived social support. Multilevel modeling analyses were used to test actor-partner interdependence. The findings indicated significant actor effects for child acceptance, parental self-efficacy, and social support. All were positively associated with parental involvement. Gender was found to moderate the actor effect of child acceptance. Partner effects were found only for mothers, for child acceptance, and social support. Fathers' child acceptance and social support were negatively associated with mothers' involvement. Religiosity did not moderate neither actor nor partner effects. These results have important implications for planning intervention programs that are sensitive to each of the parent's needs.

The Effectiveness of a Joint Attention Training Program on Improving Communication Skills of Children with Autism Spectrum Disorder

ERIC Educational Resources Information Center

Eissa, Mourad Ali

2015-01-01

The purpose of this study was to explore the effect of a joint attention intervention program on improving joint attention and communication skills in children with autism disorder. Participants were ten children between the ages of five and seven who attended a school for children with developmental disabilities (Tarbya Fekrya ). A pre-post…

Employee suggestion programs: the rewards of involvement.

PubMed

Mishra, J M; McKendall, M

1993-09-01

Successful ESPs are the products of a great deal of effort by managers, administrators, teams, individuals, and reviewers, who are all striving to achieve the goals of increased profitability and enhanced employee involvement. A review of the literature indicates that there are several prescriptions that will increase the likelihood of a successful ESP (see the box). Today's American business prophets sound ceaseless calls to arms in the name of "world class performance," "global competitiveness," "total quality management," and a variety of other buzz terms. A burgeoning industry has evolved that promises, through speeches, teleconferences, seminars, and consulting contracts, to teach American organizations how to achieve excellence. In the face of a sputtering economy and unrelenting competitive pressure, today's managers must translate these laudatory ideals into hands-on reality without sacrificing the firm's profit margin to experimentation. If any idea can help an organization achieve improvement through a workable program, then that idea and that program deserve real consideration. An ESP represents an opportunity to tap the intelligence and resourcefulness of an organization's employees, and by doing so, reap significant cost savings. Those companies and managers that have an ESP program uniformly list economic advantages first when describing the benefits of their employee suggestion programs. But there is another deeper and longer term benefit inherent in an ESP. These programs allow employees to become involved in their organization; they drive deaccession to lower levels, they give employees more responsibility, they foster creative approaches to work, and they encourage creativity in pursuit of company goals.(ABSTRACT TRUNCATED AT 250 WORDS)

76 FR 21789 - ITS Joint Program Office; Vehicle to Infrastructure Core System Concept of Operations; Notice of...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-04-18

... DEPARTMENT OF TRANSPORTATION ITS Joint Program Office; Vehicle to Infrastructure Core System... Program Office (ITS JPO) will host a free public meeting to discuss the Vehicle to Infrastructure (V2I... to work originally performed under the Vehicle Infrastructure Integration Proof of Concept (VII POC...

Leg extensor muscle strength, postural stability, and fear of falling after a 2-month home exercise program in women with severe knee joint osteoarthritis.

PubMed

Rätsepsoo, Monika; Gapeyeva, Helena; Sokk, Jelena; Ereline, Jaan; Haviko, Tiit; Pääsuke, Mati

2013-01-01

BACKGROUND AND OBJECTIVE. The aim of this study was to compare the leg extensor muscle strength, the postural stability, and the fear of falling in the women with severe knee joint osteoarthritis (OA) before and after a 2-month home exercise program (HEP). MATERIAL AND METHODS. In total, 17 women aged 46-72 years with late-stage knee joint OA scheduled for total knee arthroplasty participated in this study before and after the 2-month HEP with strengthening, stretching, balance, and step exercises. The isometric peak torque (PT) of the leg extensors and postural stability characteristics when standing on a firm or a foam surface for 30 seconds were recorded. The fear of falling and the pain intensity (VAS) were estimated. RESULTS. A significant increase in the PT and the PT-to-body weight (PT-to-BW) ratio of the involved leg as well as the bilateral PT and the PT-to-BW ratio was found after the 2-month HEP compared with the data before the HEP (P<0.05). The PT and the PT-to-BW ratio of the involved leg were significantly lower compared with the uninvolved leg before the HEP (P<0.05). The center of the pressure sway length (foam surface) decreased significantly after the HEP (P<0.05). Significant correlations were found between the PT of the involved leg and the bilateral PT and the fear of falling and between the PT of the involved leg and the postural sway (foam surface) before the HEP. CONCLUSIONS. After the 2-month HEP, the leg extensor muscle strength increased and the postural sway length on a foam surface decreased. The results indicate that the increased leg extensor muscle strength improves postural stability and diminishes the fear of falling in women with late-stage knee joint OA.

Joint Enrollment Report, 2014

ERIC Educational Resources Information Center

Iowa Department of Education, 2014

2014-01-01

The Iowa Department of Education collects information on joint enrollment in Iowa's 15 community colleges. Jointly enrolled students are high school students enrolled in community college credit coursework. Most jointly enrolled students enroll through Senior Year Plus (SYP) programs such as Postsecondary Enrollment Options (PSEO) and concurrent…

Joint Enrollment Report, 2015

ERIC Educational Resources Information Center

Iowa Department of Education, 2015

2015-01-01

The Iowa Department of Education collects information on joint enrollment from Iowa's 15 community colleges. Jointly enrolled students are high school students enrolled in community college credit coursework. Most jointly enrolled students enroll through Senior Year Plus programs such as Postsecondary Enrollment Options (PSEO) and concurrent…

Effects of mothers involved in dental health program for their children.

PubMed

Choi, Hye Seon; Ahn, Hye Young

2012-12-01

The purpose of this study was to identify the effects of mothers' involvement in a dental health program for their elementary school children. This study was a non-equivalent control group pre-post test design in which knowledge and behaviors related to dental health, perceived benefits and barriers, self-efficacy and plaque control scores were compared between the experimental group (n=26) for whom the dental health program included the direct involvement of the mothers, and the control group (n=24) for whom knowledge related to dental health was provided through brochures. Scores for the experimental group in which the mothers were involved in the dental health program were significantly higher for knowledge, behaviors in dental health, self-efficacy and plaque control compared to the control group. Results of this study suggest that mothers involvement in the dental health program is effective in reinforcing dental health enhancing behavior in elementary school children.

Creating Programs to Help Latino Youth Thrive at School: The Influence of Latino Parent Involvement Programs

ERIC Educational Resources Information Center

Behnke, Andrew O.; Kelly, Christine

2011-01-01

Parent involvement programs can play an essential role in the academic success of Latino youth. This article reports the effectiveness and evaluation of two new Extension programs that help Latino parents become more involved in their youths' academics. The Latino Parent and Family Advocacy and Support Training (LPFAST) targets parents of K- 8th…

Project Parents: Awareness, Education, Involvement Program. O.E.E. Evaluation Report, 1981-1982.

ERIC Educational Resources Information Center

Lehman, Sheila; Frischholz, Edward J.

The Project Parents: Awareness, Education, Involvement Program is an educational program which is conducted by the New York City Schools and involves 144 parents with children in elementary level bilingual education programs or eligible for such programs. While the focus of the program is on parents, its goal is the enhanced educational…

Common Bolted Joint Analysis Tool

NASA Technical Reports Server (NTRS)

Imtiaz, Kauser

2011-01-01

Common Bolted Joint Analysis Tool (comBAT) is an Excel/VB-based bolted joint analysis/optimization program that lays out a systematic foundation for an inexperienced or seasoned analyst to determine fastener size, material, and assembly torque for a given design. Analysts are able to perform numerous what-if scenarios within minutes to arrive at an optimal solution. The program evaluates input design parameters, performs joint assembly checks, and steps through numerous calculations to arrive at several key margins of safety for each member in a joint. It also checks for joint gapping, provides fatigue calculations, and generates joint diagrams for a visual reference. Optimum fastener size and material, as well as correct torque, can then be provided. Analysis methodology, equations, and guidelines are provided throughout the solution sequence so that this program does not become a "black box:" for the analyst. There are built-in databases that reduce the legwork required by the analyst. Each step is clearly identified and results are provided in number format, as well as color-coded spelled-out words to draw user attention. The three key features of the software are robust technical content, innovative and user friendly I/O, and a large database. The program addresses every aspect of bolted joint analysis and proves to be an instructional tool at the same time. It saves analysis time, has intelligent messaging features, and catches operator errors in real time.

Managing Recurrence in Intraarticular Melorheostosis Involving the Knee Joint: A Case Report

PubMed Central

John, Bobby; Sharma, Anirudh; Pandey, Ritesh A

2017-01-01

Introduction: Melorheostosis is a rare benign sclerosing dysplasia affecting bone, which causes significant morbidity in the form of pain and restriction of joint movement. Treatment options are varied, and recurrence is common after surgical treatment. Choosing the most appropriate treatment option in the management of a recurrent case is challenging, with very little supporting evidence in literature owing to the rarity of the disease. We hereby present a case of recurrent melorheostosis involving the knee; discuss treatment options and the rationale of our treatment. Case Report: We present the case of a 42-year-old female who was operated at our institution previously 7 years ago for melorheostosis of her left knee and had undergone excision of intrarticular hyperostotic masses. However, pain and limitation of motion recurred in the operated knee 4 years later, and radiographs and computed tomography revealed a mineralized mass situated behind the patella in the patellofemoral joint. She was treated with repeat open excision of the mass and put on a regimen of physiotherapy and bisphosphonates. Conclusion: Open excision of symptomatic hyperostotic or mineralized soft tissue masses is perhaps the favored treatment option in such cases, the other options being arthroscopic excision and total knee arthroplasty. Limited knee motion and size of the mass often make arthroscopy an unfeasible option. Total knee arthroplasty should be reserved for cases with significant flexion contractures of the knee, or where multiple excisions have failed. PMID:29242791

Scope of Work for Joint W28/AGM-28A Missile Firing Program (Phase 1)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Draper, E.H.

1965-04-16

List of principles & responsibilities of this Sandia/AEC & Air Force joint program for verifying the functionability of the W28/AGM-28A/B-52 weapon system under actual routine handling, assembling, and firing during a stockpile-to-target sequence.

Adhesive-bonded scarf and stepped-lap joints

NASA Technical Reports Server (NTRS)

Hart-Smith, L. J.

1973-01-01

Continuum mechanics solutions are derived for the static load-carrying capacity of scarf and stepped-lap adhesive-bonded joints. The analyses account for adhesive plasticity and adherend stiffness imbalance and thermal mismatch. The scarf joint solutions include a simple algebraic formula which serves as a close lower bound, within a small fraction of a per cent of the true answer for most practical geometries and materials. Digital computer programs were developed and, for the stepped-lap joints, the critical adherend and adhesive stresses are computed for each step. The scarf joint solutions exhibit grossly different behavior from that for double-lap joints for long overlaps inasmuch as that the potential bond shear strength continues to increase with indefinitely long overlaps on the scarf joints. The stepped-lap joint solutions exhibit some characteristics of both the scarf and double-lap joints. The stepped-lap computer program handles arbitrary (different) step lengths and thickness and the solutions obtained have clarified potentially weak design details and the remedies. The program has been used effectively to optimize the joint proportions.

The impact of banners on digital television: the role of program interactivity and product involvement.

PubMed

Cauberghe, Verolien; De Pelsmacker, Patrick

2008-02-01

In a sample of 281 respondents, the effect of a noninteractive and a medium-interactive television program on recall and brand attitudes for low- and high-involvement products advertised in banners during these programs was investigated. Medium-interactive programs resulted in less product and brand recall and recognition of brands in embedded banner advertisements, but generated more positive brand attitudes than noninteractive programs. These effects were more outspoken for a high-involvement product than for a low-involvement product. The impact of perceived program interactivity on brand attitude is fully mediated program valence and involvement for low-involvement products, but not for high-involvement products, for which perceived program interactivity had a direct impact on brand attitude.

7 CFR 3405.7 - Joint project proposals.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 7 Agriculture 15 2011-01-01 2011-01-01 false Joint project proposals. 3405.7 Section 3405.7... AGRICULTURE HIGHER EDUCATION CHALLENGE GRANTS PROGRAM Program Description § 3405.7 Joint project proposals. Applicants are encouraged to submit joint project proposals as defined in § 3405.2(m), which address regional...

Russian Tu-144LL SST Roll-Out for Joint NASA Research Program

NASA Technical Reports Server (NTRS)

1996-01-01

The modified Tu-144LL supersonic flying laboratory is rolled out of its hangar at the Zhukovsky Air Development Center near Moscow, Russia in March 1996 at the beginning of a joint U.S. - Russian high-speed flight research program. The 'LL' stands for Letayuschaya Laboratoriya, which means Flying Laboratory. NASA teamed with American and Russian aerospace industries for an extended period in a joint international research program featuring the Russian-built Tu-144LL supersonic aircraft. The object of the program was to develop technologies for a proposed future second-generation supersonic airliner to be developed in the 21st Century. The aircraft's initial flight phase began in June 1996 and concluded in February 1998 after 19 research flights. A shorter follow-on program involving seven flights began in September 1998 and concluded in April 1999. All flights were conducted in Russia from Tupolev's facility at the Zhukovsky Air Development Center near Moscow. The centerpiece of the research program was the Tu 144LL, a first-generation Russian supersonic jetliner that was modified by its developer/builder, Tupolev ANTK (aviatsionnyy nauchno-tekhnicheskiy kompleks-roughly, aviation technical complex), into a flying laboratory for supersonic research. Using the Tu-144LL to conduct flight research experiments, researchers compared full-scale supersonic aircraft flight data with results from models in wind tunnels, computer-aided techniques, and other flight tests. The experiments provided unique aerodynamic, structures, acoustics, and operating environment data on supersonic passenger aircraft. Data collected from the research program was being used to develop the technology base for a proposed future American-built supersonic jetliner. Although actual development of such an advanced supersonic transport (SST) is currently on hold, commercial aviation experts estimate that a market for up to 500 such aircraft could develop by the third decade of the 21st Century. The

76 FR 28040 - Medicare and Medicaid Programs; Application by the Joint Commission for Continued Deeming...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-05-13

... furnish information for use in enforcement activities; monitoring procedures for provider entities found... agreements are at 42 CFR part 489 and those pertaining to activities relating to the survey and certification... for monitoring CAHs found out of compliance with the Joint Commission's program requirements. These...

Development of the Joint Committee Standards for Evaluations of Educational Programs, Projects, and Materials.

ERIC Educational Resources Information Center

Diamond, Esther E.

The growing demand for program evaluation in the 1970s gave rise to a need for a comprehensive, carefully developed, objective set of guiding principles for the evaluation process, from initial planning to final report. The Joint Committee on Standards for Education Evaluation was established to meet this need. This broad-based group, representing…

FAA/NASA Joint University Program for Air Transportation Research 1994-1995

NASA Technical Reports Server (NTRS)

Remer, J. H.

1998-01-01

The Joint University Program for Air Transportation Research (JUP) is a coordinated set of three grants co-sponsored by the Federal Aviation Administration (FAA) and the National Aeronautics and Space Administration (NASA). Under JUP, three institutions: the Massachusetts Institute of Technology, Princeton, and Ohio Universities receive research grants and collaborate with FAA and NASA in defining and performing civil aeronautics research in a multitude of areas. Some of these disciplines are artificial intelligence, control theory, atmospheric hazards, navigation, avionics, human factors, flight dynamics, air traffic management, and electronic communications.

F-35 Joint Strike Fighter (JSF) Program: Background, Status, and Issues

DTIC Science & Technology

2007-07-19

Buy ‘Hundreds’ of STOVL Joint Strike Fighters,” Inside the Air Force. September 17, 2004. 6 Marc Selinger. “Jumper Confirms Air Force Plans to Cut...concluded that some 230 of the Navy’s projected buy of 480 JSFs could instead be F/A-18E/Fs, depending on the progress of the JSF program and the price of...18E/F Buy Depends on JSF Progress,’Cohen Tells SASC,” Aerospace Daily, May 21, 1997: 285, 288. See also CRS Issue Brief IB93041, C- 17 Cargo

Adaptation of an Evidence-Based Arthritis Program for Breast Cancer Survivors on Aromatase Inhibitor Therapy Who Experience Joint Pain

PubMed Central

Callahan, Leigh F.; Rini, Christine; Altpeter, Mary; Hackney, Betsy; Schecher, Arielle; Wilson, Anne; Muss, Hyman B.

2015-01-01

Adding aromatase inhibitors (AIs) to adjuvant treatment of postmenopausal women with hormone-receptor–positive breast cancer significantly reduces cancer recurrence. A common side effect of AIs is noninflammatory joint pain and stiffness (arthralgia) similar to arthritis symptoms. An evidence-based walking program developed by the Arthritis Foundation — Walk With Ease (WWE) — reduces arthritis-related joint symptoms. We hypothesized that WWE may also reduce AI-associated arthralgia. However, the potential for different barriers and facilitators to physical activity for these 2 patient populations suggested a need to adapt WWE before testing it with breast cancer survivors. We conducted qualitative research with 46 breast cancer survivors to explore program modification and inform the development of materials for an adapted program (Walk With Ease-Breast Cancer). Our process parallels the National Cancer Institute’s Research-Tested Intervention Programs (RTIPs) guidelines for adapting evidence-based programs for cancer populations. Findings resulted in a customized 8-page brochure to supplement existing WWE materials. PMID:26068412

Rene 95 brazed joint metallurgical program

NASA Technical Reports Server (NTRS)

Gay, C.; Givens, J.; Mastrorroco, S.; Sterman, A.

1972-01-01

This metallurgical program was specifically conducted for the establishment of material properties required for the design of the LF460 fan. The LF460 lift fan is an advanced 18:1 high thrust to weight single stage design. It has a turbine attached to the outer flowpath of the fan blade tip which minimizes the axial depth of the fan. Advanced lightweight attachment designs are employed in this concept to achieve minimum mass polar moments of inertia which are required for good aircraft flight response control. The design features which are unique to this advanced LF460 lift fan are the 0.010 inch thin Udimet 700 alloy integral tip turbine design, minimum weight braze attachment of the turbine to the fan blade, and the high strength and elevated temperature capability of the Rene'95 alloy for the fan blade. The data presented in this report show that the LF460 fan rotor design is feasible and that the design stresses and margins of safety were more than adequate. Prior to any production application, however, additional stress rupture/shear lap joints should be run in order to establish a firm 1200 F stress rupture curve for the CM50 braze metal.

76 FR 2147 - UAW-Chrysler National Training Center Technology Training Joint Programs Staff, Detroit, MI; UAW...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-01-12

... Technical Training Center Technology Training Joint Programs Staff, Warren, MI; Notice of Revised... facilities. The information revealed that the technical training provided (such as applied industrial... engaged in employment related to the supply of technical training services, meet the worker group...

Art Involvement Program. A Final Report, September 15, 1978-July 1, 1980.

ERIC Educational Resources Information Center

Grunberg, Stephanie

An Art Involvement Program is described which helped students in middle schools, junior high and high schools develop their sense of aesthetic appreciation through visits to an art gallery. Publicized through press releases, the program involved various schools in New Jersey that decided to participate. Students from a wide variety of backgrounds…

Commitments: A Guide to Community Involvement Programs at The George Washington University.

ERIC Educational Resources Information Center

George Washington Univ., Washington, DC.

This guide to community involvement programs sponsored by the George Washington University provides a synopsis and a contact person for 33 general university programs, 38 medical school and hospital programs, eight National Law Center programs, eight School of Engineering and Applied Science programs, and two programs of the Division of…

Strategies for Increasing Faculty Involvement in Institutional or Program Assessment

ERIC Educational Resources Information Center

Caudle, LeAnn; Hammons, James O.

2018-01-01

This narrative research study was conducted to explore the experiences of full-time community college faculty members involved in student learning outcomes assessment. Prior research documented the need for more community college faculty involvement with assessment at the program and institutional levels (Grunwald & Peterson, 2003; Kinzie,…

The "Generacion Diez" after-school program and Latino parent involvement with schools.

PubMed

Riggs, Nathaniel R; Medina, Carmen

2005-11-01

The current study examines associations between participation in after-school programs and change in Latino parent involvement with schools. Hierarchical linear regression analyses demonstrated that parents of children who had higher after-school program attendance rates were significantly more likely to report increases in the quality of relationships with their children's teachers, frequency of parent-teacher contact, and engagement with their children's schooling over a two-year period. However, greater home educator contacts were related to decreases in quality and quantity of parent-school involvement. A primary implication is that attendance in school-based after-school programs may draw parents into children's regular-day school context. Editors' Strategic Implications The authors illustrate the promising practice of using after-school programs to promote parent involvement and to help integrate the often disparate family and school contexts for Latino children.

24 CFR 570.411 - Joint Community Development Program.

Code of Federal Regulations, 2010 CFR

2010-04-01

... chief executive officer of each unit of general local government affected or a resolution of the... Availability described below in paragraph (h) of this section. (d) Role of participants in joint applications... will have to clearly delineate the role of each applicant in the joint application. Any funding...

23 CFR 668.113 - Program and project procedures.

Code of Federal Regulations, 2010 CFR

2010-04-01

... program. This work may involve joint site inspections to view damage and reach tentative agreement on type... be sufficient to identify the approved disaster or catastrophe and to permit a determination of the...

Evaluating public participation in environmental decision-making: EPA's superfund community involvement program.

PubMed

Charnley, Susan; Engelbert, Bruce

2005-11-01

This article discusses an 8-year, ongoing project that evaluates the Environmental Protection Agency's Superfund community involvement program. The project originated as a response to the Government Performance and Results Act, which requires federal agencies to articulate program goals, and evaluate and report their progress in meeting those goals. The evaluation project assesses how effective the Superfund community involvement program is in promoting public participation in decisions about how to clean up hazardous wastes at Superfund sites. We do three things in the article: (1) share our experience with evaluating an Agency public participation program, including lessons learned about methods of evaluation; (2) report evaluation results; and (3) address a number of issues pertaining to the evaluation of public participation in environmental decision-making. Our goal is to encourage more environmental managers to incorporate evaluation into their public participation programs as a tool for improving them. We found that written mail surveys were an effective and economical tool for obtaining feedback on EPA's community involvement program at Superfund sites. The evaluation focused on four criteria: citizen satisfaction with EPA information about the Superfund site, citizen understanding of environmental and human health risks associated with the site, citizen satisfaction with opportunities provided by EPA for community input, and citizen satisfaction with EPA's response to community input. While the evaluation results were mixed, in general, community members who were most informed about and involved in the cleanup process at Superfund sites generally were also the most satisfied with the community involvement process, and the job that EPA was doing cleaning up the site. We conclude that systematic evaluation provides meaningful and useful information that agencies can use to improve their public participation programs. However, there need to be

Probing Emissions of Military Cargo Aircraft: Description of a Joint Field Measurement Program

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cheng, Mengdawn; Corporan, E.; DeWitt, M.

2008-01-01

Direct emissions of NOx, volatile organic compounds, and particulate matter (PM) by aircraft contribute to the pollutant levels found in the atmosphere. Aircraft emissions can be injected at the ground level or directly at the high altitude in flight. Conversion of the precursor gases into secondary PM is one of the pathways for the increased atmospheric PM. Atmospheric PM interacts with solar radiation altering atmospheric radiation balance and potentially contributing to global and regional climate changes. Also, direct emissions of air toxics, ozone precursors and PM from aircraft in and around civilian airports and military air bases can worsen localmore » air quality in non-attainment and/or maintenance areas. These emissions need to be quantified. However, the current EPA methods for particle emission measurements from such sources, modified Method 5 and Conditional Test Method 039, are gravimetric-based, and it is anticipated that these methods will not be suitable for current and future generations of aircraft turbine engines, whose particle mass emissions are low. To evaluate measurement approaches for military aircraft emissions, two complementary projects were initiated in 2005. A joint field campaign between these two programs was executed during the first week of October 2005 at the Kentucky Air National Guard (KYANG) base in Louisville, KY. This campaign represented the first in a series of field studies for each program funded by the DoD Strategic Environmental Research and Development Program (SERDP) and provided the basis for cross-comparison of the sampling approaches and measurement techniques employed by the respective program teams. This paper describes the overall programmatic of the multi-year SERDP aircraft emissions research and presents a summary of the results from the joint field campaign.« less

Management of the patient with a total joint replacement: the primary care practitioner's role.

PubMed

Palmer, L M

1999-01-01

The primary care practitioner assumes chief responsibility for patients with arthritis. More than 40 million Americans experience some form of arthritis. Management of the patient with arthritis may include a referral to an orthopedic surgeon for surgical intervention. As estimated, up to 500,000 total joint replacement procedures are performed by orthopedic surgeons each year in the United States. Presurgical evaluation for a total joint replacement is imperative to ensure that the patient can safely undergo this surgical procedure. Postsurgical care of a patient with total joint replacement involves coordinating care with the physical therapist and orthopedic surgeon to ensure adequate follow-through with the recommended rehabilitation program, prophylactic antibiotic coverage, and observation for any complications including infection, deep-vein thrombosis, or loosening of the total-joint prosthesis.

Involving Scientists in the NASA / JPL Solar System Educators Program

NASA Astrophysics Data System (ADS)

Brunsell, E.; Hill, J.

2001-11-01

The NASA / JPL Solar System Educators Program (SSEP) is a professional development program with the goal of inspiring America's students, creating learning opportunities, and enlightening inquisitive minds by engaging them in the Solar System exploration efforts conducted by the Jet Propulsion Laboratory (JPL). SSEP is a Jet Propulsion Laboratory program managed by Space Explorers, Inc. (Green Bay, WI) and the Virginia Space Grant Consortium (Hampton, VA). The heart of the program is a large nationwide network of highly motivated educators. These Solar System Educators, representing more than 40 states, lead workshops around the country that show teachers how to successfully incorporate NASA materials into their teaching. During FY2001, more than 9500 educators were impacted through nearly 300 workshops conducted in 43 states. Solar System Educators attend annual training institutes at the Jet Propulsion Laboratory during their first two years in the program. All Solar System Educators receive additional online training, materials and support. The JPL missions and programs involved in SSEP include: Cassini Mission to Saturn, Galileo Mission to Jupiter, STARDUST Comet Sample Return Mission, Deep Impact Mission to a Comet, Mars Exploration Program, Outer Planets Program, Deep Space Network, JPL Space and Earth Science Directorate, and the NASA Office of Space Science Solar System Exploration Education and Public Outreach Forum. Scientists can get involved with this program by cooperatively presenting at workshops conducted in their area, acting as a content resource or by actively mentoring Solar System Educators. Additionally, SSEP will expand this year to include other missions and programs related to the Solar System and the Sun.

Young Mothers' Involvement in a Prenatal and Postpartum Support Program

ERIC Educational Resources Information Center

Wen, Xiaoli; Korfmacher, Jon; Hans, Sydney L.; Henson, Linda G.

2010-01-01

The involvement of 124 young mothers in a doula support program was measured in two dimensions--quantity of program contact and quality of mother-doula helping relationship. The study examined each dimension's differential associations with maternal outcomes, as well as the moderating effects of mother characteristics on these associations.…

The coach program - a "joint" approach to patient education and support.

PubMed

Shaked, Yael; Dickson, Patricia; Workman, Kathy

2016-12-01

Hospital lengths of stay for orthopaedic procedures are declining internationally. Discharge home from hospital following total joint replacement surgery can be stressful due to pain and physical restrictions. Thus, many patients report experiencing increased anxiety and feeling a sudden withdrawal of support from their medical team. The Coach Program maximizes human resources and family-centred care by formally integrating an individual whom the patient identifies as their primary support into their health care team. This unique and innovative program was designed to decrease patient anxiety, increase patient confidence, enhance coping with shorter hospital lengths of stay, and smooth the discharge planning process. Anecdotal feedback from patients and staff has been overwhelmingly positive. A pilot self-reported patient survey was conducted. Future steps include distribution and analysis of a more detailed survey to a broader patient population and finding ways to address the needs of patients with limited social support. Copyright © 2016 Elsevier Inc. All rights reserved.

Determination of Parachute Joint Factors using Seam and Joint Testing

NASA Technical Reports Server (NTRS)

Mollmann, Catherine

2015-01-01

This paper details the methodology for determining the joint factor for all parachute components. This method has been successfully implemented on the Capsule Parachute Assembly System (CPAS) for the NASA Orion crew module for use in determining the margin of safety for each component under peak loads. Also discussed are concepts behind the joint factor and what drives the loss of material strength at joints. The joint factor is defined as a "loss in joint strength...relative to the basic material strength" that occurs when "textiles are connected to each other or to metals." During the CPAS engineering development phase, a conservative joint factor of 0.80 was assumed for each parachute component. In order to refine this factor and eliminate excess conservatism, a seam and joint testing program was implemented as part of the structural validation. This method split each of the parachute structural joints into discrete tensile tests designed to duplicate the loading of each joint. Breaking strength data collected from destructive pull testing was then used to calculate the joint factor in the form of an efficiency. Joint efficiency is the percentage of the base material strength that remains after degradation due to sewing or interaction with other components; it is used interchangeably with joint factor in this paper. Parachute materials vary in type-mainly cord, tape, webbing, and cloth -which require different test fixtures and joint sample construction methods. This paper defines guidelines for designing and testing samples based on materials and test goals. Using the test methodology and analysis approach detailed in this paper, the minimum joint factor for each parachute component can be formulated. The joint factors can then be used to calculate the design factor and margin of safety for that component, a critical part of the design verification process.

ASCO's International programs and how you can become involved.

PubMed

El Saghir, Nagi S; Assi, Hussein A; Pyle, Doug

2013-01-01

The American Society of Clinical Oncology (ASCO) is dedicated to serving its members and to reducing disparities in the treatment of patients with cancer and their outcome. ASCO has a portfolio of international programs called ASCO International that aims to improve clinical practice by sharing oncology knowledge through a network of ASCO members and partners. In order to achieve its goals, ASCO has an International Affairs Committee that oversees many programs that involve a global exchange of knowledge through courses and workshops, mentoring, initiatives promoting research, and specialty training standards. All of these programs depend on ASCO member volunteers in one capacity or another.

Adapting The Joint Commission's Seven Foundations of Safe and Effective Transitions of Care to Home

PubMed Central

Labson, Margherita C.

2015-01-01

The purpose of this article is to describe The Joint Commission's 7 foundations of safe and effective transitions of care to home: (a) leadership support; (b) multidisciplinary collaboration; (c) early identification of patients/clients at risk; (d) transitional planning; (e) medication management; (f) patient and family action/engagement; and (g) transfer of information. These foundations were identified by The Joint Commission after a review of published research; focus groups with healthcare professionals involved in transitions of care; and visits to diverse healthcare organizations. The author, who is the executive director of The Joint Commission's Home Care Accreditation Program, illustrates how healthcare organizations are adapting the 7 foundations of safe and effective transitions of care to home. PMID:25742092

Strength evaluation of socket joints

NASA Technical Reports Server (NTRS)

Rash, Larry C.

1994-01-01

This report documents the development of a set of equations that can be used to provide a relatively simple solution for identifying the strength of socket joints and for most cases avoid the need of more lengthy analyses. The analytical approach was verified by comparison of the contact load distributions to results obtained from a finite element analysis. The contacting surfaces for the specific joint in this analysis are in the shape of frustrums of a cone and are representative of the tapered surfaces in the socket-type joints used to join segments of model support systems for wind tunnels. The results are in the form of equations that can be used to determine the contact loads and stresses in the joint from the given geometry and externally applied loads. Equations were determined to define the bending moments and stresses along the length of the joints based on strength and materials principles. The results have also been programmed for a personal computer and a copy of the program is included.

Joint ventures: to pursue or not to pursue?

PubMed

Blaszyk, Michael D; Hill-Mischel, Jody

2007-11-01

Hospitals should carefully select joint venture partners. The joint venture evaluation process should involve a high-level screen of strategic opportunities. Hospitals should develop a full business plan for the joint venture.

Involving Volunteers in Your Advancement Programs. The Best of "CASE Currents."

ERIC Educational Resources Information Center

Smith, Virginia Carter, Ed.; Alberger, Patricia LaSalle, Ed.

A compilation of the best articles from "CASE Currents" on involving volunteers in institutional advancement programs is presented. Overall topics include: management of volunteers, working with trustees (volunteers at the top), benefits of participation for volunteers, and involving volunteers in fund raising, public relations, student…

U.S. EPA Superfund Program's Policy for Community Involvement at Radioactively Contaminated Sites

DOE Office of Scientific and Technical Information (OSTI.GOV)

Carey, Pat; Walker, Stuart

2008-01-15

This paper describes the Superfund program's statutory requirements for community involvement. It also discusses the efforts the Superfund program has made that go beyond these statutory requirements to involve communities. The Environmental Protection Agency (EPA) implements the Superfund program under the authority of the Comprehensive Environmental Response, Compensation, and Liability Act of 1980 (CERCLA), as amended by the Superfund Amendments and Reauthorization Act of 1986 (SARA). From the beginning of the Superfund program, Congress envisioned a role for communities. This role has evolved and expanded during the implementation of the Superfund program. Initially, the CERCLA statute had community involvement requirementsmore » designed to inform surrounding communities of the work being done at a site. CERCLA's provisions required 1) development of a community relations plan for each site, 2) establishment of information repositories near each site where all publicly available materials related to the site would be accessible for public inspection, 3) opportunities for the public to comment on the proposed remedy for each site and 4) development of a responsiveness summary responding to all significant comments received on the proposed remedy. In recognition of the need for people living near Superfund sites to be well-informed and involved with decisions concerning sites in their communities, SARA expanded Superfund's community involvement activities in 1986. SARA provided the authority to award Technical Assistance Grants (TAGs) to local communities enabling them to hire independent technical advisors to assist them in understanding technical issues and data about the site. The Superfund Community Involvement Program has sought to effectively implement the statutory community involvement requirements, and to go beyond those requirements to find meaningful ways to involve citizens in the cleanup of sites in their communities. We've structured our program

Critical joints in large composite aircraft structure

NASA Technical Reports Server (NTRS)

Nelson, W. D.; Bunin, B. L.; Hart-Smith, L. J.

1983-01-01

A program was conducted at Douglas Aircraft Company to develop the technology for critical structural joints of composite wing structure that meets design requirements for a 1990 commercial transport aircraft. The prime objective of the program was to demonstrate the ability to reliably predict the strength of large bolted composite joints. Ancillary testing of 180 specimens generated data on strength and load-deflection characteristics which provided input to the joint analysis. Load-sharing between fasteners in multirow bolted joints was computed by the nonlinear analysis program A4EJ. This program was used to predict strengths of 20 additional large subcomponents representing strips from a wing root chordwise splice. In most cases, the predictions were accurate to within a few percent of the test results. In some cases, the observed mode of failure was different than anticipated. The highlight of the subcomponent testing was the consistent ability to achieve gross-section failure strains close to 0.005. That represents a considerable improvement over the state of the art.

Drug-food interaction counseling programs in teaching hospitals.

PubMed

Wix, A R; Doering, P L; Hatton, R C

1992-04-01

The results of a survey to characterize drug-food interaction counseling programs in teaching hospitals and solicit opinions on these programs from pharmacists and dietitians are reported. A questionnaire was mailed to the pharmacy director and the director of dietary services at teaching hospitals nationwide. The questionnaire contained 33 questions relating to hospital characteristics, drug-food interaction counseling programs, and the standard calling for such programs issued by the Joint Commission on Accreditation of Healthcare Organizations. Of 792 questionnaires mailed, 425 were returned (response rate, 53.7). A majority of the pharmacists and dietitians (51.2%) did not consider their drug-food interaction counseling program to be formal; some had no program. The pharmacy department was involved more in program development than in the daily operation of such programs. The most frequent methods of identifying patients for counseling were using lists of patients' drugs and using physicians' orders. A mean of only five drugs were targeted per program. Slightly over half the respondents rated the Joint Commission standard less effective than other standards in its ability to improve patient care. A majority of teaching hospitals did not have formal drug-food interaction counseling programs. Pharmacists and dietitians did not view these programs as greatly beneficial and did not believe that the Joint Commission has clearly delineated the requirements for meeting its standard.

Community Involvement in a Place-Based Program for Hawaiian High School Students

ERIC Educational Resources Information Center

Yamauchi, Lois A.; Purcell, Andrea K.

2009-01-01

This study examined the development of community involvement in a place-based high school program for at-risk youth. Teachers and community members founded the program to address concerns about low achievement and high dropout rates among Native Hawaiians. In addition to funding, community members provided program development, supervision of…

Joint Enrollment: Fiscal Year 2016. Annual Report

ERIC Educational Resources Information Center

Division of Community Colleges and Workforce Preparation, Iowa Department of Education, 2017

2017-01-01

The Iowa Department of Education collects information on joint enrollment from Iowa's 15 community colleges. Jointly enrolled students are high school students enrolled in community college credit coursework. Most jointly enrolled students enroll through Senior Year Plus programs such as Postsecondary Enrollment Options (PSEO) and concurrent…

34 CFR 400.5 - Under what conditions may funds under the Act be used for the joint funding of programs?

Code of Federal Regulations, 2010 CFR

2010-07-01

... VOCATIONAL AND APPLIED TECHNOLOGY EDUCATION PROGRAMS-GENERAL PROVISIONS § 400.5 Under what conditions may... 34 Education 3 2010-07-01 2010-07-01 false Under what conditions may funds under the Act be used for the joint funding of programs? 400.5 Section 400.5 Education Regulations of the Offices of the...

Management of chronic unstable acromioclavicular joint injuries.

PubMed

Cisneros, Luis Natera; Reiriz, Juan Sarasquete

2017-12-01

The acromioclavicular joint represents the link between the clavicle and the scapula, which is responsible for the synchronized dynamic of the shoulder girdle. Chronic acromioclavicular joint instability involves changes in the orientation of the scapula, which provokes cinematic alterations that might result in chronic pain. Several surgical strategies for the management of patients with chronic and symptomatic acromioclavicular joint instability have been described. The range of possibilities includes anatomical and non-anatomical techniques, open and arthroscopy-assisted procedures, and biological and synthetic grafts. Surgical management of chronic acromioclavicular joint instability should involve the reconstruction of the torn ligaments because it is accepted that from three weeks after the injury, these structures may lack healing potential. Here, we provide a review of the literature regarding the management of chronic acromioclavicular joint instability. Expert opinion, Level V.

Joint Commission

MedlinePlus

... Progress, June 2016 issue, explores The Joint Commission’s internal Robust Process Improvement ® program. Read the ... cry for improving our services. It has provided a pulpit from which we structure quality and safety activities and get buy-in from ...

A joint labor-management hazard communication training program: a case study in worker health and safety training.

PubMed

Robins, T G; Hugentobler, M K; Kaminski, M; Klitzman, S

1994-01-01

The 1983 OSHA Hazard Communication Standard requires training of employees exposed to hazardous chemicals. The authors provide a detailed look at the successes and failures of a joint labor-management training program that was designed to bring a firm with more than 50 manufacturing facilities into compliance with the standard.

Faculty and Staff Member Benefits from Involvement in Living-Learning Programs

ERIC Educational Resources Information Center

Haynes, Cliff; Janosik, Steven M.

2012-01-01

The purpose of this study was to identify the benefits that faculty and student affairs staff gain from being involved in Living-Learning Programs (LLPs) and to explore any differences between the two groups. Faculty and student affairs staff (N = 268) report gaining intrinsic benefits more often than extrinsic benefits from their involvement in…

Oxide dispersion strengthened ferritic steels: a basic research joint program in France

NASA Astrophysics Data System (ADS)

Boutard, J.-L.; Badjeck, V.; Barguet, L.; Barouh, C.; Bhattacharya, A.; Colignon, Y.; Hatzoglou, C.; Loyer-Prost, M.; Rouffié, A. L.; Sallez, N.; Salmon-Legagneur, H.; Schuler, T.

2014-12-01

AREVA, CEA, CNRS, EDF and Mécachrome are funding a joint program of basic research on Oxide Dispersion Strengthened Steels (ODISSEE), in support to the development of oxide dispersion strengthened 9-14% Cr ferritic-martensitic steels for the fuel element cladding of future Sodium-cooled fast neutron reactors. The selected objectives and the results obtained so far will be presented concerning (i) physical-chemical characterisation of the nano-clusters as a function of ball-milling process, metallurgical conditions and irradiation, (ii) meso-scale understanding of failure mechanisms under dynamic loading and creep, and, (iii) kinetic modelling of nano-clusters nucleation and α/α‧ unmixing.

Noninflammatory Joint Contractures Arising from Immobility: Animal Models to Future Treatments

PubMed Central

Wong, Kayleigh; Trudel, Guy; Laneuville, Odette

2015-01-01

Joint contractures, defined as the limitation in the passive range of motion of a mobile joint, can be classified as noninflammatory diseases of the musculoskeletal system. The pathophysiology is not well understood; limited information is available on causal factors, progression, the pathophysiology involved, and prediction of response to treatment. The clinical heterogeneity of joint contractures combined with the heterogeneous contribution of joint connective tissues to joint mobility presents challenges to the study of joint contractures. Furthermore, contractures are often a symptom of a wide variety of heterogeneous disorders that are in many cases multifactorial. Extended immobility has been identified as a causal factor and evidence is provided from both experimental and epidemiology studies. Of interest is the involvement of the joint capsule in the pathophysiology of joint contractures and lack of response to remobilization. While molecular pathways involved in the development of joint contractures are being investigated, current treatments focus on physiotherapy, which is ineffective on irreversible contractures. Future treatments may include early diagnosis and prevention. PMID:26247029

Evaluation of the 1997 Joint National Conference, Women in Engineering Program Advocates Network (WEPAN) and National Association of Minority Engineering Program Administrators (NAMEPA)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Brainard, Suzanne G.

1997-07-01

The primary goal of the 1997 Joint National Conference was to unite NAMEPA and WEPAN in a unique collaborative effort to further the cause of increasing the participation of women and minorities in science and engineering. The specific objectives were to: (1) conduct technical and programmatic seminars for institutions desiring to initiate, replicate, or expand women and minorities in engineering program; (2) provide assistance in fundraising and grant writing; (3) profile women in engineering programs of excellence; (4) sponsor inspiring knowledgeable and motivational keynote speakers; and (5) offer a series of workshops focused on a multitude of topics.

Joint Hampton-Michigan Program for Training Minority and Women Researchers. Volume II of II Volumes. Final Report.

ERIC Educational Resources Information Center

Michigan Univ., Ann Arbor. School of Education.

The papers presented in this volume are the team research reports of the Joint Hampton-Michigan Program conducted in 1979-1980 for junior faculty members of the Hampton Institute (Virginia) and graduate students and faculty members of the University of Michigan. The titles of the papers are: (1) Social and Economic Implications of Teacher Training…

NASA safety program activities in support of the Space Exploration Initiatives Nuclear Propulsion program

NASA Technical Reports Server (NTRS)

Sawyer, J. C., Jr.

1993-01-01

The activities of the joint NASA/DOE/DOD Nuclear Propulsion Program Technical Panels have been used as the basis for the current development of safety policies and requirements for the Space Exploration Initiatives (SEI) Nuclear Propulsion Technology development program. The Safety Division of the NASA Office of Safety and Mission Quality has initiated efforts to develop policies for the safe use of nuclear propulsion in space through involvement in the joint agency Nuclear Safety Policy Working Group (NSPWG), encouraged expansion of the initial policy development into proposed programmatic requirements, and suggested further expansion into the overall risk assessment and risk management process for the NASA Exploration Program. Similar efforts are underway within the Department of Energy to ensure the safe development and testing of nuclear propulsion systems on Earth. This paper describes the NASA safety policy related to requirements for the design of systems that may operate where Earth re-entry is a possibility. The expected plan of action is to support and oversee activities related to the technology development of nuclear propulsion in space, and support the overall safety and risk management program being developed for the NASA Exploration Program.

Joint Advertising Market Research & Studies (JAMRS)

Science.gov Websites

Market Research & Studies Marketing Communications Recruiting Database Affiliations WELCOME TO JOINT joint marketing communications and market research and studies. One of JAMRS' objectives is to explore reported to Congress. Our marketing communications programs help increase awareness and broaden people's

Joint Space Operations Center (JSpOC) Mission System Increment 3 (JMS Inc 3)

DTIC Science & Technology

2016-03-01

2016 Major Automated Information System Annual Report Joint Space Operations Center (JSpOC) Mission System Increment 3 (JMS Inc 3) Defense...1725 DSN Phone: DSN Fax: Date Assigned: May 16, 2014 Program Information Program Name Joint Space Operations Center (JSpOC) Mission System...approved program baseline; therefore, no Original Estimate has been established. JMS Inc 3 2016 MAR UNCLASSIFIED 4 Program Description The Joint Space

Factors Affecting Teen Involvement in Pennsylvania 4-H Programming

ERIC Educational Resources Information Center

Gill, Bart E.; Ewing, John C.; Bruce, Jacklyn A.

2010-01-01

The study reported here determined the factors that affect teen involvement in 4-H programming. The design of the study was descriptive and correlational in nature. Using a purposive sampling procedure, a survey questionnaire was distributed to all (N=214) 4-H members attending the 4-H State Leadership Conference. The major findings of the study…

Consumer involvement in the health technology assessment program.

PubMed

Royle, Jane; Oliver, Sandy

2004-01-01

This study aims to describe a cycle of development leading to sustainable methods for involving consumers in the management of a program commissioning health technology assessment. Staff time was dedicated to developing procedures for recruiting and briefing consumers to participate in prioritizing, commissioning, and reporting research. Resources and support were developed in light of early feedback from consumers and those working with them. These were piloted and amended before being used routinely. Over 4 years, procedures and resources have been developed to support six consumers attending seven to eight prioritization meetings a year; thirty to forty-five consumers each year commenting on research need for particular topics; thirty consumers a year commenting on research proposals, and twenty a year commenting on research reports. The procedures include clear job descriptions, induction and development days, clear briefing materials, payment for substantial tasks, and regularly seeking feedback to improve procedures. Explicit, inclusive, and reproducible methods for supporting consumer involvement that satisfy National Health Service policy recommendations for involving consumers in research require dedicated staff time to support a cycle of organizational development.

NASA Boeing 737 Aircraft Test Results from 1996 Joint Winter Runway Friction Measurement Program

NASA Technical Reports Server (NTRS)

Yager, Thomas J.

1996-01-01

A description of the joint test program objectives and scope is given together with the performance capability of the NASA Langley B-737 instrumented aircraft. The B-737 test run matrix conducted during the first 8 months of this 5-year program is discussed with a description of the different runway conditions evaluated. Some preliminary test results are discussed concerning the Electronic Recording Decelerometer (ERD) readings and a comparison of B-737 aircraft braking performance for different winter runway conditions. Detailed aircraft parameter time history records, analysis of ground vehicle friction measurements and harmonization with aircraft braking performance, assessment of induced aircraft contaminant drag, and evaluation of the effects of other factors on aircraft/ground vehicle friction performance will be documented in a NASA Technical Report which is being prepared for publication next year.

Identifying Barriers That Hinder Onsite Parental Involvement in a School-Based Health Promotion Program

PubMed Central

Garcia-Dominic, Oralia; Wray, Linda A.; Treviño, Roberto P.; Hernandez, Arthur E.; Yin, Zenong; Ulbrecht, Jan S.

2009-01-01

We investigated whether barriers to onsite parental involvement in the Bienestar Health Program Parent Component could be identified and whether participation rates could be increased by addressing these barriers. All nonparticipating parents of fourth-grade students of San Antonio Independent School District from 4 schools, which were selected randomly from 20 intervention schools in Bienestar, were invited to take part in this study. A total of 47 of 223 (21%) parents engaged in one of four focus groups offered. Parents identified barriers to their involvement in Bienestar that fit into five descriptive categories: (a) low value, (b) high cost, (c) competing family demands, (d) concerns about the program design, and (e) social role norms. The Bienestar Parent Component was then modified according to the focus group findings, which resulted in a marked increase in parental involvement from 17% to 37% overall. These findings suggest that even when parents are involved in the initial design of parent-friendly and culturally sensitive programs, as was the case for Bienestar, maximizing parental involvement may require additional assessment, identification, and remediation of barriers. PMID:19339644

Mothers' and fathers' involvement in intervention programs for deaf and hard of hearing children.

PubMed

Zaidman-Zait, Anat; Most, Tova; Tarrasch, Ricardo; Haddad, Eliana

2018-06-01

Parental involvement in the rehabilitation process of deaf and hard of hearing (DHH) children is considered vital to children's progress. Today, fathers are more likely to be involved in their children's care. Nevertheless, father involvement has been understudied and relatively little is known about their involvement in families with children who are deaf or hard of hearing. In addition, there are scant data on the correlates of parents' involvement. This study explored similarities and differences in parental involvement between mothers and fathers in intervention programs for their D/HH children and tested a set of personal and social contextual variables that posited to affect parental involvement in a unique socio-cultural group. Thirty Israeli-Arab couples (mothers and fathers) of young D/HH children took part. Each parent completed four self-report measures of parental involvement, parenting stress, parental self-efficacy, and social support. Mothers were significantly more involved than fathers in their child's intervention. Specifically, they report on higher interest and attendance and overall being more actively engaged with professionals in the child's intervention. Both mothers and fathers had a rather passive style of involvement in their child's intervention. Parental self-efficacy and informal and formal social support were associated with father involvement. For mothers, only formal social support was associated with involvement. For the Israeli-Arab population, the findings underscore the differences between mothers' and fathers' multiple dimensions of involvement in the intervention program of their D/HH children and their predictors. The results suggest important avenues for prevention and intervention activities when working with families of children who are D/HH. Implications for rehabilitation Parental involvement in intervention programs for children who are deaf or hard of hearing (D/HH) is vital to children's progress and an essential

[Function and structure of the Federal Joint Committee and the Institute for Quality and Efficiency in Health Care in consideration of patient involvement].

PubMed

Mühlbauer, V; Teupen, S

2014-01-01

The Federal Joint Committee and the Institute for Quality and Efficiency in Health Care have become important players in the German health care system, not only since the benefit assessment of pharmaceuticals and the Act on the Reform of the Market for Medicinal Products (AMNOG) were established. However, the manifold tasks and duties these institutions have besides the benefit assessment of pharmaceuticals is less known, just as the role the patient's representatives play. The function and structure of the Federal Joint Committee and the Institute for Quality and Efficiency in Health Care as well as their collaboration in consideration of patient involvement will be explained in this article. © Georg Thieme Verlag KG Stuttgart · New York.

Evaluating public participation in environmental decision-making: EPA's superfund community involvement program.

Treesearch

Susan Charnley; Bruce Engelbert

2005-01-01

This article discusses an 8-year, ongoing project that evaluates the Environmental Protection Agency's Superfund community involvement program. The project originated as a response to the Government Performance and Results Act, which requires federal agencies to articulate program goals, and evaluate and report their progress in meeting those goals. The evaluation...

Feedback-controlled and programmed stretching of the ankle plantarflexors and dorsiflexors in stroke: effects of a 4-week intervention program.

PubMed

Selles, Ruud W; Li, Xiaoyan; Lin, Fang; Chung, Sun G; Roth, Elliot J; Zhang, Li-Qun

2005-12-01

To investigate the effect of repeated feedback-controlled and programmed "intelligent" stretching of the ankle plantar- and dorsiflexors to treat subjects with ankle spasticity and/or contracture in stroke. Noncontrolled trial. Institutional research center. Subjects with spasticity and/or contracture after stroke. Stretching of the plantar- and dorsiflexors of the ankle 3 times a week for 45 minutes during a 4-week period by using a feedback-controlled and programmed stretching device. Passive and active range of motion (ROM), muscle strength, joint stiffness, joint viscous damping, reflex excitability, comfortable walking speed, and subjective experiences of the subjects. Significant improvements were found in the passive ROM, maximum voluntary contraction, ankle stiffness, and comfortable walking speed. The visual analog scales indicated very positive subjective evaluation in terms of the comfort of stretching and the effect on their involved ankle. Repeated feedback-controlled or intelligent stretching had a positive influence on the joint properties of the ankle with spasticity and/or contracture after stroke. The stretching device may be an effective and safe alternative to manual passive motion treatment by a therapist and has potential to be used to repeatedly and regularly stretch the ankle of subjects with spasticity and/or contracture without daily involvement of clinicians or physical therapists.

Robotic joint experiments under ultravacuum

NASA Technical Reports Server (NTRS)

Borrien, A.; Petitjean, L.

1988-01-01

First, various aspects of a robotic joint development program, including gearbox technology, electromechanical components, lubrication, and test results, are discussed. Secondly, a test prototype of the joint allowing simulation of robotic arm dynamic effects is presented. This prototype is tested under vacuum with different types of motors and sensors to characterize the functional parameters: angular position error, mechanical backlash, gearbox efficiency, and lifetime.

Arthrofibrosis involving the middle facet of the talocalcaneal joint in children and adolescents.

PubMed

El Rassi, George; Riddle, Eric C; Kumar, S Jay

2005-10-01

Pain over the anterolateral aspect of the ankle in a patient with a history of repeated ankle sprains and with restricted subtalar movement may be associated with a tarsal coalition. Nineteen patients presented with such a history, but conventional imaging did not reveal a cartilaginous or osseous coalition. Since symptoms persisted despite nonoperative treatment, the middle facet was explored surgically. The purpose of this study was to discuss the operative findings and to report the results of treatment. Nineteen patients (twenty-three feet) with pain over the anterolateral aspect of the ankle or a history of repeated ankle sprains had restricted subtalar joint motion and inconclusive findings on diagnostic imaging, except for bone-scanning. Their ages ranged from 9.1 to 18.5 years. The middle facet of the subtalar joint was explored surgically through a 3 to 4-cm-long incision centered over the sustentaculum tali. The results at a mean of 5.8 years were classified as good, fair, or poor on the basis of pain, talocalcaneal joint motion, and shoe wear. Routine radiographs, computed tomography, and magnetic resonance imaging revealed no major abnormality, whereas technetium-99m bone scintigraphy consistently showed slightly increased isotope uptake in the middle facet. Surgical removal of a hypervascular and thickened capsule and synovium in the area of the middle facet of the subtalar joint decreased pain and improved subtalar motion. The final result was good in seventeen patients (twenty feet) and fair in two patients (three feet). There were no poor results. A diagnosis of inflammatory arthrofibrosis should be considered when a patient with a painful rigid flatfoot has normal findings on radiographs and hematological studies but increased isotope uptake in the middle facet of the talocalcaneal joint on bone scintigraphy. Excision of the hypervascular capsule and synovium from this area can result in resolution of the symptoms. Therapeutic Level IV.

Joint Ventures: A New Agenda for Education.

ERIC Educational Resources Information Center

Griffin, Dean

1989-01-01

The author states that vocational education can join in partnerships with industry, labor, and government to contribute to economic development. Examples of current programs are included. The "joint venture" concept is explained and ideas for forming joint ventures are shared. (CH)

Semiconductor laser joint study program with Rome Laboratory

NASA Astrophysics Data System (ADS)

Schaff, William J.; Okeefe, Sean S.; Eastman, Lester F.

1994-09-01

A program to jointly study vertical-cavity surface emitting lasers (VCSEL) for high speed vertical optical interconnects (VOI) has been conducted under an ES&E between Rome Laboratory and Cornell University. Lasers were designed, grown, and fabricated at Cornell University. A VCSEL measurement laboratory has been designed, built, and utilized at Rome Laboratory. High quality VCSEL material was grown and characterized by fabricating conventional lateral cavity lasers that emitted at the design wavelength of 1.04 microns. The VCSEL's emit at 1.06 microns. Threshold currents of 16 mA at 4.8 volts were obtained for 30 microns diameter devices. Output powers of 5 mW were measured. This is 500 times higher power than from the light emitting diodes employed previously for vertical optical interconnects. A new form of compositional grading using a cosinusoidal function has been developed and is very successful for reducing diode series resistance for high speed interconnection applications. A flip-chip diamond package compatible with high speed operation of 16 VCSEL elements has been designed and characterized. A flip-chip device binding effort at Rome Laboratory was also designed and initiated. This report presents details of the one-year effort, including process recipes and results.

Joint Tactical Networks (JTN)

DTIC Science & Technology

2013-12-01

Selected Acquisition Report (SAR) RCS: DD-A&T(Q&A)823-284 Joint Tactical Networks (JTN) As of FY 2015 President’s Budget... Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to a penalty for failing to comply with a collection...to 00-00-2013 4. TITLE AND SUBTITLE Joint Tactical Networks (JTN) 5a. CONTRACT NUMBER 5b. GRANT NUMBER 5c. PROGRAM ELEMENT NUMBER 6. AUTHOR(S

Chronic bowel inflammation and inflammatory joint disease: Pathophysiology.

PubMed

Speca, Silvia; Dubuquoy, Laurent

2017-07-01

Bowel inflammation is closely linked to chronic joint inflammation. Research reported in the 1980s demonstrated bowel inflammation with gross and microscopic pathological features identical to those of Crohn's disease in over 60% of patients with spondyloarthritis (SpA). Numerous prospective studies have evidenced joint involvement in patients with chronic inflammatory bowel disease (IBD) and bowel inflammation in patients with SpA. Nevertheless, the interactions of joint disease and chronic bowel inflammation remain incompletely elucidated. Two main hypotheses have been suggested to explain potential links between inflammation of the mucosal immune system and peripheral arthritis: one identifies gut bacteria as potentially implicated in the development of joint inflammation and the other involves the recruitment of gut lymphocytes or activated macrophages to the joints. Pathophysiological investigations have established that HLA-B27 is a pivotal pathogenic factor. Here, we review current data on links between chronic bowel inflammation and inflammatory joint disease. Copyright © 2017 Société française de rhumatologie. Published by Elsevier SAS. All rights reserved.

7 CFR 1956.110 - Joint debtors.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 7 Agriculture 14 2010-01-01 2009-01-01 true Joint debtors. 1956.110 Section 1956.110 Agriculture... REGULATIONS (CONTINUED) DEBT SETTLEMENT Debt Settlement-Community and Business Programs § 1956.110 Joint... offer. A separate Form FmHA or its successor agency under Public Law 103-354 1956-1 will be completed by...

Spacecraft environmental interactions: A joint Air Force and NASA research and technology program

NASA Technical Reports Server (NTRS)

Pike, C. P.; Purvis, C. K.; Hudson, W. R.

1985-01-01

A joint Air Force/NASA comprehensive research and technology program on spacecraft environmental interactions to develop technology to control interactions between large spacecraft systems and the charged-particle environment of space is described. This technology will support NASA/Department of Defense operations of the shuttle/IUS, shuttle/Centaur, and the force application and surveillance and detection missions, planning for transatmospheric vehicles and the NASA space station, and the AFSC military space system technology model. The program consists of combined contractual and in-house efforts aimed at understanding spacecraft environmental interaction phenomena and relating results of ground-based tests to space conditions. A concerted effort is being made to identify project-related environmental interactions of concern. The basic properties of materials are being investigated to develop or modify the materials as needed. A group simulation investigation is evaluating basic plasma interaction phenomena to provide inputs to the analytical modeling investigation. Systems performance is being evaluated by both groundbased tests and analysis.

The Joint Polar Satellite System (JPSS) Program's Algorithm Change Process (ACP): Past, Present and Future

NASA Technical Reports Server (NTRS)

Griffin, Ashley

2017-01-01

The Joint Polar Satellite System (JPSS) Program Office is the supporting organization for the Suomi National Polar Orbiting Partnership (S-NPP) and JPSS-1 satellites. S-NPP carries the following sensors: VIIRS, CrIS, ATMS, OMPS, and CERES with instruments that ultimately produce over 25 data products that cover the Earths weather, oceans, and atmosphere. A team of scientists and engineers from all over the United States document, monitor and fix errors in operational software code or documentation with the algorithm change process (ACP) to ensure the success of the S-NPP and JPSS 1 missions by maintaining quality and accuracy of the data products the scientific community relies on. This poster will outline the programs algorithm change process (ACP), identify the various users and scientific applications of our operational data products and highlight changes that have been made to the ACP to accommodate operating system upgrades to the JPSS programs Interface Data Processing Segment (IDPS), so that the program is ready for the transition to the 2017 JPSS-1 satellite mission and beyond.

Fathers of Children in Public Preschool Programs: A Study of School Involvement and Satisfaction

ERIC Educational Resources Information Center

Noggle, Amy Kappel

2012-01-01

In this quantitative study, I examined the involvement levels of fathers of children attending public preschool programs using the Family Involvement Questionnaire; I also examined fathers' satisfaction with school contact and involvement experiences using the Parent Satisfaction with Educational Experiences scale. Additionally, I…

Involving youth in program decision-making: how common and what might it do for youth?

PubMed

Akiva, Thomas; Cortina, Kai S; Smith, Charles

2014-11-01

The strategy of sharing program decision-making with youth in youth programs, a specific form of youth-adult partnership, is widely recommended in practitioner literature; however, empirical study is relatively limited. We investigated the prevalence and correlates of youth program decision-making practices (e.g., asking youth to help decide what activities are offered), using single-level and multilevel methods with a cross-sectional dataset of 979 youth attending 63 multipurpose after-school programs (average age of youth = 11.4, 53 % female). The prevalence of such practices was relatively high, particularly for forms that involved low power sharing such as involving youth in selecting the activities a program offers. Hierarchical linear modeling revealed positive associations between youth program decision-making practices and youth motivation to attend programs. We also found positive correlations between decision-making practices and youth problem-solving efficacy, expression efficacy, and empathy. Significant interactions with age suggest that correlations with problem solving and empathy are more pronounced for older youth. Overall, the findings suggest that involving youth in program decision-making is a promising strategy for promoting youth motivation and skill building, and in some cases this is particularly the case for older (high school-age) youth.

SRB Environment Evaluation and Analysis. Volume 2: RSRB Joint Filling Test/Analysis Improvements

NASA Technical Reports Server (NTRS)

Knox, E. C.; Woods, G. Hamilton

1991-01-01

Following the Challenger accident a very comprehensive solid rocket booster (SRB) redesign program was initiated. One objective of the program was to develop expertise at NASA/MSFC in the techniques for analyzing the flow of hot gases in the SRB joints. Several test programs were undertaken to provide a data base of joint performance with manufactured defects in the joints to allow hot gases to fill the joints. This data base was used also to develop the analytical techniques. Some of the test programs were Joint Environment Simulator (JES), Nozzle Joint Environment Simulator (NJES), Transient Pressure Test Article (TPTA), and Seventy-Pound Charge (SPC). In 1988 the TPTA test hardware was moved from the Utah site to MSFC and several RSRM tests were scheduled, to be followed by tests for the ASRM program. REMTECH Inc. supported these activities with pretest estimates of the flow conditions in the test joints, and post-test analysis and evaluation of the measurements. During this support REMTECH identified deficiencies in the gas-measurement instrumentation that existed in the TPTA hardware, made recommendations for its replacement, and identified improvements to the analytical tools used in the test support. Only one test was completed under the TPTA RSRM test program, and those scheduled for the ASRM were rescheduled to a time after the expiration of this contract. The attention of this effort was directed toward improvements in the analytical techniques in preparation for when the ASRM program begins.

Influence of Adding Single-Joint Exercise to a Multijoint Resistance Training Program in Untrained Young Women.

PubMed

Barbalho, Matheus; Gentil, Paulo; Raiol, Rodolfo; Fisher, James; Steele, James; Coswig, Victor

2018-05-15

Barbalho, M, Gentil, P, Raiol, R, Fisher, J, Steele, J, and Coswig, V. Influence of adding single-joint exercise to a multijoint resistance training program in untrained young women. J Strength Cond Res XX(X): 000-000, 2018-The aim of the present study was to investigate the effects of adding single-joint (SJ) exercises to a multijoint (MJ) resistance training (RT) program on muscle strength and anthropometric measures of young women. Twenty untrained women were divided into a group that performed only MJ exercises or a group that performed both SJ and MJ exercises (MJ + SJ). Before and after 8 weeks of training, the participants were tested for 10 repetition maximum (10RM). Flexed arm circumference and triceps and biceps skinfold thickness were also measured. Both groups significantly decreased biceps (-3.60% for MJ and -3.55% for MJ + SJ) and triceps skinfold (-3.05% for MJ and -2.98% for MJ + SJ), with no significant difference between them. Flexed arm circumference significantly increased in both groups; however, increases in MJ + SJ (4.39%) were significantly greater than MJ (3.50%). Increases in 10RM load in elbow extension (28.2% for MJ and 28.0% for MJ + SJ), elbow flexion (29.8% for MJ and 28.7% for MJ + SJ), and knee extension (26.92% for MJ and 23.86% for MJ + SJ) were all significant and not different between groups. The results showed that adding SJ exercises to an MJ RT program resulted in no benefits in muscle performance or anthropometric changes in untrained women.

Quiet Short-Haul Research Aircraft Joint Navy/NASA Sea Trials

NASA Technical Reports Server (NTRS)

Queen, S.; Cochrane, J.

1982-01-01

The Quiet Short-Haul Research Aircraft (QSRA) is a flight facility which Ames Research Center is using to conduct a broad program of terminal area and low-speed, propulsive-life flight research. A joint Navy/NASA flight research program used the QSRA to investigate the application of advanced propulsive-lift technology to the naval aircraft-carrier environment. Flight performance of the QSRA is presented together with the results or the joint Navy/NASA flight program. During the joint program, the QSRA operated aboard the USS Kitty Hawk for 4 days, during which numerous unarrested landings and free deck takeoffs were accomplished. These operations demonstrated that a large aircraft incorporating upper-surface-blowing, propulsive-life technology can be operated in the aircraft-carrier environment without any unusual problems.

Hip2Norm: an object-oriented cross-platform program for 3D analysis of hip joint morphology using 2D pelvic radiographs.

PubMed

Zheng, G; Tannast, M; Anderegg, C; Siebenrock, K A; Langlotz, F

2007-07-01

We developed an object-oriented cross-platform program to perform three-dimensional (3D) analysis of hip joint morphology using two-dimensional (2D) anteroposterior (AP) pelvic radiographs. Landmarks extracted from 2D AP pelvic radiographs and optionally an additional lateral pelvic X-ray were combined with a cone beam projection model to reconstruct 3D hip joints. Since individual pelvic orientation can vary considerably, a method for standardizing pelvic orientation was implemented to determine the absolute tilt/rotation. The evaluation of anatomically morphologic differences was achieved by reconstructing the projected acetabular rim and the measured hip parameters as if obtained in a standardized neutral orientation. The program had been successfully used to interactively objectify acetabular version in hips with femoro-acetabular impingement or developmental dysplasia. Hip(2)Norm is written in object-oriented programming language C++ using cross-platform software Qt (TrollTech, Oslo, Norway) for graphical user interface (GUI) and is transportable to any platform.

Experience of international collaboration in preparation of masters in “Mechatronics” with call for funds from Tempus and Erasmus programs

NASA Astrophysics Data System (ADS)

Zhmud, V. A.; Frantsuzova, G. A.; Dimitrov, L. V.; Nosek, J.

2018-05-01

This paper reveals the main problems of creating and implementing double diploma programs between universities of Russia and Europe. Novosibirsk State Technical University implements such programs with Technical Universities of Sofia (Bulgaria) and Liberec (Czech Republic). The paper presents the latest results of this activity and discusses the possibilities of its development in the field of joint postgraduate training, as well as joint scientific research with the involvement of students and postgraduate.

Facial morphology in children and adolescents with juvenile idiopathic arthritis and moderate to severe temporomandibular joint involvement.

PubMed

Hsieh, Yuh-Jia; Darvann, Tron A; Hermann, Nuno V; Larsen, Per; Liao, Yu-Fang; Bjoern-Joergensen, Jens; Kreiborg, Sven

2016-02-01

The aims of this study were to (1) assess lateral facial morphology in children and adolescents with juvenile idiopathic arthritis and moderate to severe temporomandibular joint (TMJ) involvement, (2) compare the lateral facial morphology of these subjects with and without TMJ involvement using cephalograms and 3-dimensional (3D) facial photographs, and (3) compare and correlate the results of the 3D photographic and cephalometric analyses. Sixty patients with juvenile idiopathic arthritis were included and grouped as follows: group 1, juvenile idiopathic arthritis patients without TMJ involvement; group 2, juvenile idiopathic arthritis patients with moderate to severe unilateral TMJ involvement; and group 3, juvenile idiopathic arthritis patients with moderate to severe bilateral TMJ involvement. Lateral cephalograms were used to assess and compare lateral facial morphologies between the groups. Lateral projections of oriented 3D photographs were superimposed on the lateral cephalograms. The results of the lateral 3D photographic analysis were correlated with those of lateral cephalometric analysis. Group 3 showed the most severe growth disturbances, including more retrognathic mandible and retruded chin, steep occlusal and mandibular planes, and more hyperdivergent type (P <0.01). Group 2 showed similar growth disturbances, but to a lesser extent than did group 3. Photographic variables were significantly correlated with the soft tissue and skeletal variables of cephalograms (0.5 < r < 0.9; P <0.001). Subjects with juvenile idiopathic arthritis and unilateral or bilateral moderate to severe TMJ involvement had significant growth disturbances. Early intervention is recommended for these patients to prevent unfavorable facial development. Furthermore, with proper orientation, 3D photographs can be used as an alternative to conventional lateral cephalograms and 2-dimensional photographs. Copyright © 2016 American Association of Orthodontists. Published by Elsevier

Satellite Power System (SPS) FY 79 program summary

NASA Technical Reports Server (NTRS)

1980-01-01

The Satellite Power System (SPS) program a joint effort to develop an initial understanding of the technical feasibility, the economic practicality, and the social and environmental acceptability of the SPS concept is discussed. This is being accomplished through implementation of the Concept Development and Evaluation Program Plan which is scheduled for completion by the end of FY 1980. This Program Summary not only covers FY 1979 but includes work completed in FY 1977 and FY 1978 in order to give a comprehensive picture of the DOE involvement in the SPS concept development and evaluation process.

Joint surface modeling with thin-plate splines.

PubMed

Boyd, S K; Ronsky, J L; Lichti, D D; Salkauskas, K; Chapman, M A; Salkauskas, D

1999-10-01

Mathematical joint surface models based on experimentally determined data points can be used to investigate joint characteristics such as curvature, congruency, cartilage thickness, joint contact areas, as well as to provide geometric information well suited for finite element analysis. Commonly, surface modeling methods are based on B-splines, which involve tensor products. These methods have had success; however, they are limited due to the complex organizational aspect of working with surface patches, and modeling unordered, scattered experimental data points. An alternative method for mathematical joint surface modeling is presented based on the thin-plate spline (TPS). It has the advantage that it does not involve surface patches, and can model scattered data points without experimental data preparation. An analytical surface was developed and modeled with the TPS to quantify its interpolating and smoothing characteristics. Some limitations of the TPS include discontinuity of curvature at exactly the experimental surface data points, and numerical problems dealing with data sets in excess of 2000 points. However, suggestions for overcoming these limitations are presented. Testing the TPS with real experimental data, the patellofemoral joint of a cat was measured with multistation digital photogrammetry and modeled using the TPS to determine cartilage thicknesses and surface curvature. The cartilage thickness distribution ranged between 100 to 550 microns on the patella, and 100 to 300 microns on the femur. It was found that the TPS was an effective tool for modeling joint surfaces because no preparation of the experimental data points was necessary, and the resulting unique function representing the entire surface does not involve surface patches. A detailed algorithm is presented for implementation of the TPS.

Strength Variation of Parachute Joints

NASA Technical Reports Server (NTRS)

Mollmann, Catherine

2017-01-01

A parachute joint is defined as a location where a component is sewn or connected to another component. During the design and developmental phase of a parachute system, the joints for each structural component are isolated and tested through a process called seam and joint testing. The objective of seam and joint testing is to determine the degradation on a single component due to interaction with other components; this data is then used when calculating the margin of safety for that component. During the engineering developmental phase of CPAS (Capsule Parachute Assembly System), the parachute system for the NASA Orion Crew Module, testing was completed for every joint of the six subsystems: the four parachutes (main, drogue, pilot, and FBCP [forward bay cover parachute]), the retention release bridle, and the retention panels. The number of joint tests for these subsystems totaled 92, which provides a plethora of data and results for further analysis. In this paper, the data and results of these seam and joint tests are examined to determine the effects, if any, of different operators and sewing machines on the strength of parachute joints. Other variables are also studied to determine their effect on joint strength, such as joint complexity, joint strength magnitude, material type, and material construction. Findings reveal that an optimally-run seam and joint test program could result in an increased understanding of the structure of the parachute; this should lead to a parachute built with optimal components, potentially saving system weight and volume.

Infant joint attention, neural networks and social cognition.

PubMed

Mundy, Peter; Jarrold, William

2010-01-01

Neural network models of attention can provide a unifying approach to the study of human cognitive and emotional development (Posner & Rothbart, 2007). In this paper we argue that a neural network approach to the infant development of joint attention can inform our understanding of the nature of human social learning, symbolic thought process and social cognition. At its most basic, joint attention involves the capacity to coordinate one's own visual attention with that of another person. We propose that joint attention development involves increments in the capacity to engage in simultaneous or parallel processing of information about one's own attention and the attention of other people. Infant practice with joint attention is both a consequence and an organizer of the development of a distributed and integrated brain network involving frontal and parietal cortical systems. This executive distributed network first serves to regulate the capacity of infants to respond to and direct the overt behavior of other people in order to share experience with others through the social coordination of visual attention. In this paper we describe this parallel and distributed neural network model of joint attention development and discuss two hypotheses that stem from this model. One is that activation of this distributed network during coordinated attention enhances the depth of information processing and encoding beginning in the first year of life. We also propose that with development, joint attention becomes internalized as the capacity to socially coordinate mental attention to internal representations. As this occurs the executive joint attention network makes vital contributions to the development of human symbolic thinking and social cognition. Copyright © 2010 Elsevier Ltd. All rights reserved.

Infant Joint Attention, Neural Networks and Social Cognition

PubMed Central

Mundy, Peter; Jarrold, William

2010-01-01

Neural network models of attention can provide a unifying approach to the study of human cognitive and emotional development (Posner & Rothbart, 2007). This paper we argue that a neural networks approach to the infant development of joint attention can inform our understanding of the nature of human social learning, symbolic thought process and social cognition. At its most basic, joint attention involves the capacity to coordinate one’s own visual attention with that of another person. We propose that joint attention development involves increments in the capacity to engage in simultaneous or parallel processing of information about one’s own attention and the attention of other people. Infant practice with joint attention is both a consequence and organizer of the development of a distributed and integrated brain network involving frontal and parietal cortical systems. This executive distributed network first serves to regulate the capacity of infants to respond to and direct the overt behavior of other people in order to share experience with others through the social coordination of visual attention. In this paper we describe this parallel and distributed neural network model of joint attention development and discuss two hypotheses that stem from this model. One is that activation of this distributed network during coordinated attention enhances to depth of information processing and encoding beginning in the first year of life. We also propose that with development joint attention becomes internalized as the capacity to socially coordinate mental attention to internal representations. As this occurs the executive joint attention network makes vital contributions to the development of human symbolic thinking and social cognition. PMID:20884172

The joint in psoriatic arthritis.

PubMed

Mortezavi, Mahta; Thiele, Ralph; Ritchlin, Christopher

2015-01-01

Psoriatic arthritis (PsA), a chronic inflammatory joint disease associated with psoriasis, is notable for diversity in disease presentation, course and response to treatment. Equally varied are the types of musculoskeletal involvement which include peripheral and axial joint disease, dactylitis and enthesitis. In this review, we focus on the psoriatic joint and discuss pathways that underlie synovial, cartilage and bone inflammation and highlight key histopathologic features. The pivotal inflammatory mechanisms and pathobiology of PsA parallel findings in other forms of spondyloarthritis but are distinct from disease pathways described in rheumatoid synovitis and bone disease. The diagnosis of PsA from both a clinical and imaging perspective is also discussed.

2014-2015 Partnership accomplishments report on joint activities: National Gap Analysis Program and LANDFIRE

USGS Publications Warehouse

Davidson, Anne; McKerrow, Alexa; Long, Don; Earnhardt, Todd

2015-01-01

The intended target audience for this document initially is management and project technical specialist and scientists involved in the Gap Analysis Program (GAP) and the Landscape Fire and Resource Management Planning Tools - (LANDFIRE) program to help communicate coordination activities to all involved parties. This document is also intended to give background information in other parts of the USGS and beyond, although some details given are relatively oriented to management of the respective programs. Because the Gap Analysis Program (GAP) and the Landscape Fire and Resource Management Planning Tools - LANDFIRE programs both rely on characterizations of land cover using similar scales and resolutions, the programs have been coordinating their work to improve scientific consistency and efficiency of production. Initial discussions and informal sharing of ideas and work began in 2008. Although this collaboration was fruitful, there was no formal process for reporting results, plans, or outstanding issues, nor was there any formally-defined coordinated management team that spanned the two programs. In 2012, leadership from the two programs agreed to strengthen the coordination of their respective work efforts. In 2013 the GAP and LANDFIRE programs developed an umbrella plan of objectives and components related to three mutual focus areas for the GAP and LANDFIRE collaboration for the years 2013 and 2014 (GAP/LANDFIRE 2013). The evolution of this partnership resulted in the drafting of an inter-program Memorandum of Understanding (MOU) in 2014. This MOU identified three coordination topics relevant to the two programs participating at this point in the MOU history: Vegetation mappingDisturbance classesFormal quality assessment

The State of the Empirical Research Literature on Stakeholder Involvement in Program Evaluation

ERIC Educational Resources Information Center

Brandon, Paul R.; Fukunaga, Landry L.

2014-01-01

Evaluators widely agree that stakeholder involvement is a central aspect of effective program evaluation. With the exception of articles on collaborative evaluation approaches, however, a systematic review of the breadth and depth of the literature on stakeholder involvement has not been published. In this study, we examine peer-reviewed empirical…

Commercial Complexity and Local and Global Involvement in Programs: Effects on Viewer Responses.

ERIC Educational Resources Information Center

Oberman, Heiko; Thorson, Esther

A study investigated the effects of local (momentary) and global (whole program) involvement in program context and the effects of message complexity on the retention of television commercials. Sixteen commercials, categorized as simple video/simple audio through complex video/complex audio were edited into two globally high- and two globally…

Emissions and new technology programs for conventional spark-ignition aircraft engines

NASA Technical Reports Server (NTRS)

Wintucky, W. T.

1976-01-01

A long-range technology plan in support of general aviation engines was formulated and is being implemented at the Lewis Research Center. The overall program was described, and that part of the program that represents the in-house effort at Lewis was presented in detail. Three areas of government and industry effort involving conventional general-aviation piston engines were part of a coordinated overall plan: (1) FAA/NASA joint program, (2) NASA contract exhaust emissions pollution reduction program, and (3) NASA in-house emissions reduction and new technology program.

Experimental Investigation of Composite Pressure Vessel Performance and Joint Stiffness for Pyramid and Inverted Pyramid Joints

NASA Technical Reports Server (NTRS)

Verhage, Joseph M.; Bower, Mark V.; Gilbert, Paul A. (Technical Monitor)

2001-01-01

The focus of this study is on the suitability in the application of classical laminate theory analysis tools for filament wound pressure vessels with adhesive laminated joints in particular: pressure vessel wall performance, joint stiffness and failure prediction. Two 18-inch diameter 12-ply filament wound pressure vessels were fabricated. One vessel was fabricated with a 24-ply pyramid laminated adhesive double strap butt joint. The second vessel was fabricated with the same number of plies in an inverted pyramid joint. Results from hydrostatic tests are presented. Experimental results were used as input to the computer programs GENLAM and Laminate, and the output compared to test. By using the axial stress resultant, the classical laminate theory results show a correlation within 1% to the experimental results in predicting the pressure vessel wall pressure performance. The prediction of joint stiffness for the two adhesive joints in the axial direction is within 1% of the experimental results. The calculated hoop direction joint stress resultant is 25% less than the measured resultant for both joint configurations. A correction factor is derived and used in the joint analysis. The correction factor is derived from the hoop stress resultant from the tank wall performance investigation. The vessel with the pyramid joint is determined to have failed in the joint area at a hydrostatic pressure 33% value below predicted failure. The vessel with the inverted pyramid joint failed in the wall acreage at a hydrostatic pressure within 10% of the actual failure pressure.

Co-Worker Involvement in Employment Programs for Persons with Mental Retardation.

ERIC Educational Resources Information Center

McNair, Jeff

This paper reviews recent literature related to co-worker involvement in non-sheltered community-based employment programs for persons with mental retardation. Discussion of co-worker roles is categorized into six areas: training, associating, befriending, advocating, evaluating, and information giving. Also discussed are other variables…

The Cultural Context of Learning in International Joint Ventures.

ERIC Educational Resources Information Center

Liu, Shimin; Vince, Russ

1999-01-01

A study of Chinese-Western joint business ventures showed that cultural context and different modes of managing and organizing must be considered. Successful joint ventures involve a process of collective, two-way learning. (SK)

Temporal gene expression profiling of the rat knee joint capsule during immobilization-induced joint contractures.

PubMed

Wong, Kayleigh; Sun, Fangui; Trudel, Guy; Sebastiani, Paola; Laneuville, Odette

2015-05-26

Contractures of the knee joint cause disability and handicap. Recovering range of motion is recognized by arthritic patients as their preference for improved health outcome secondary only to pain management. Clinical and experimental studies provide evidence that the posterior knee capsule prevents the knee from achieving full extension. This study was undertaken to investigate the dynamic changes of the joint capsule transcriptome during the progression of knee joint contractures induced by immobilization. We performed a microarray analysis of genes expressed in the posterior knee joint capsule following induction of a flexion contracture by rigidly immobilizing the rat knee joint over a time-course of 16 weeks. Fold changes of expression values were measured and co-expressed genes were identified by clustering based on time-series analysis. Genes associated with immobilization were further analyzed to reveal pathways and biological significance and validated by immunohistochemistry on sagittal sections of knee joints. Changes in expression with a minimum of 1.5 fold changes were dominated by a decrease in expression for 7732 probe sets occurring at week 8 while the expression of 2251 probe sets increased. Clusters of genes with similar profiles of expression included a total of 162 genes displaying at least a 2 fold change compared to week 1. Functional analysis revealed ontology categories corresponding to triglyceride metabolism, extracellular matrix and muscle contraction. The altered expression of selected genes involved in the triglyceride biosynthesis pathway; AGPAT-9, and of the genes P4HB and HSP47, both involved in collagen synthesis, was confirmed by immunohistochemistry. Gene expression in the knee joint capsule was sensitive to joint immobility and provided insights into molecular mechanisms relevant to the pathophysiology of knee flexion contractures. Capsule responses to immobilization was dynamic and characterized by modulation of at least three

Parent Involvement, Parental Depression, and Program Satisfaction among Low-Income Parents Participating in a Two-Generation Early Childhood Education Program

ERIC Educational Resources Information Center

LaForett, Dore R.; Mendez, Julia L.

2010-01-01

Research Findings: This study simultaneously examined parental depression and parent involvement as predictors of satisfaction with an early childhood intervention program. Parents (N = 203) of Head Start children participated in this short-term longitudinal study. Measures of parent involvement and satisfaction assessed multiple dimensions of…

Joint Polar Satellite System

NASA Technical Reports Server (NTRS)

Trenkle, Timothy; Driggers, Phillip

2011-01-01

The Joint Polar Satellite System (JPSS) is a joint NOAA/NASA mission comprised of a series of polar orbiting weather and climate monitoring satellites which will fly in a sun-synchronous orbit, with a 1330 equatorial crossing time. JPSS resulted from the decision to reconstitute the National Polar-orbiting Operational Environmental Satellite System (NPOESS) into two separate programs, one to be run by the Department of Defense (DOD) and the other by NOAA. This decision was reached in early 2010, after numerous development issues caused a series of unacceptable delays in launching the NPOESS system.

Joint-specific risk of impaired function in fibrodysplasia ossificans progressiva (FOP).

PubMed

Pignolo, Robert J; Durbin-Johnson, Blythe P; Rocke, David M; Kaplan, Frederick S

2018-04-01

Fibrodysplasia ossificans progressiva (FOP) causes progressive disability due to heterotopic ossification from episodic flare-ups. Using data from 500 FOP patients (representing 63% of all known patients world-wide), age- and joint-specific risks of new joint involvement were estimated using parametric and nonparametric statistical methods. Compared to data from a 1994 survey of 44 individuals with FOP, our current estimates of age- and joint-specific risks of new joint involvement are more accurate (narrower confidence limits), based on a wider range of ages, and have less bias due to its greater comprehensiveness (captures over three-fifths of the known FOP patients worldwide). For the neck, chest, abdomen, and upper back, the estimated hazard decreases over time. For the jaw, lower back, shoulder, elbow, wrist, fingers, hip, knee, ankle, and foot, the estimated hazard increases initially then either plateaus or decreases. At any given time and for any anatomic site, the data indicate which joints are at risk. This study of approximately 63% of the world's known population of FOP patients provides a refined estimate of risk for new involvement at any joint at any age, as well as the proportion of patients with uninvolved joints at any age. Importantly, these joint-specific survival curves can be used to facilitate clinical trial design and to determine if potential treatments can modify the predicted trajectory of progressive joint dysfunction. Copyright © 2017 Elsevier Inc. All rights reserved.

Joint Chiefs of Staff > About > The Joint Staff > Senior Enlisted Advisor

Science.gov Websites

, Vice Chairman, and Deputies to the CJCS on standards, professional development, advancement, pay . * Helps develop and enhance Enlisted Joint Professional Military Education (EJPME) in conjunction with the Enlisted Professional Military Education Program (EPMEP) CJCSI 1805.01 series, and serves on the Keystone

Unloading joints to treat osteoarthritis, including joint distraction.

PubMed

Lafeber, Floris P J G; Intema, Femke; Van Roermund, Peter M; Marijnissen, Anne C A

2006-09-01

Patients are increasingly becoming interested in nonpharmacologic approaches to manage their osteoarthritis. This review examines the recent literature on the potential beneficial effects of unloading joints in the treatment of osteoarthritis, with a focus on joint distraction. Mechanical factors are involved in the development and progression of osteoarthritis. If "loading" is a major cause in development and progression of osteoarthritis, then "unloading" may be able to prevent progression. There is evidence that unloading may be effective in reducing pain and slowing down structural damage. This review describes unloading by footwear and bracing (nonsurgical), unloading by osteotomy (surgical), and has a focus on unloading by joint distraction. Excellent reviews in all these three fields have been published over the past few years. Recent studies argue for the usefulness of a biomechanical approach to improve function and possibly reduce disease progression in osteoarthritis. To improve patient function and possibly reduce disease progression, a biomechanical approach should be considered in treating patients with osteoarthritis. Further research (appropriate high-quality clinical trials) and analysis (clinical as well as preclinical and fundamental) are still necessary, however, to understand, validate, and refine the different approaches of unloading to treat osteoarthritis.

Principles for Developing Male Involvement Programs in Early Childhood Settings: A Personal Experience.

ERIC Educational Resources Information Center

Fagan, Jay

1996-01-01

Notes society's increasing demands that men assume a more active role as fathers. Lists five principles for developing a male involvement program in child care settings outside of home. Claims that these programs can be successful if female facilitators are sensitive to gender differences in communication and aware of the unique needs men bring to…

Bridging the Technology Valley of Death in Joint Medical Development

DTIC Science & Technology

2015-11-01

Force lieutenant colonel, is the Air Force Medical Support Agency Advanced Development Liaison Field Engineer in Falls Church, Virginia. Prusaczyk is...Awareness, communication and coordination may be mini - mal among Service S&T and AD programs. Joint Transition Planning Process A Joint Transition...Human Proof of Phase III NDA/BLA ling Approval, Launch Concept*** Launch Review Program Initiation Materiel Technology Engineering & Production

41 CFR 101-6.212-5 - Consolidated or joint hearings.

Code of Federal Regulations, 2010 CFR

2010-07-01

..., provide for the conduct of consolidated or joint hearings, and for the application to such hearings of... 41 Public Contracts and Property Management 2 2010-07-01 2010-07-01 true Consolidated or joint...-Nondiscrimination in Programs Receiving Federal Financial Assistance § 101-6.212-5 Consolidated or joint hearings...

Integrated Data Modeling and Simulation on the Joint Polar Satellite System Program

NASA Technical Reports Server (NTRS)

Roberts, Christopher J.; Boyce, Leslye; Smith, Gary; Li, Angela; Barrett, Larry

2012-01-01

The Joint Polar Satellite System is a modern, large-scale, complex, multi-mission aerospace program, and presents a variety of design, testing and operational challenges due to: (1) System Scope: multi-mission coordination, role, responsibility and accountability challenges stemming from porous/ill-defined system and organizational boundaries (including foreign policy interactions) (2) Degree of Concurrency: design, implementation, integration, verification and operation occurring simultaneously, at multiple scales in the system hierarchy (3) Multi-Decadal Lifecycle: technical obsolesce, reliability and sustainment concerns, including those related to organizational and industrial base. Additionally, these systems tend to become embedded in the broader societal infrastructure, resulting in new system stakeholders with perhaps different preferences (4) Barriers to Effective Communications: process and cultural issues that emerge due to geographic dispersion and as one spans boundaries including gov./contractor, NASA/Other USG, and international relationships.

Russian Tu-144LL SST Roll-out for Joint NASA Research Program

NASA Technical Reports Server (NTRS)

1996-01-01

U.S. Ambassador Pickering addresses Russian and American dignitaries, industry representatives and members of the press during a roll-out ceremony for the modified Tu-144LL supersonic flying laboratory. The ceremony was held at the Zhukovsky Air Development Center near Moscow, Russia, on March 17, 1996. The 'LL' designation for the aircraft stands for Letayuschaya Laboratoriya, which means Flying Laboratory in Russian. NASA teamed with American and Russian aerospace industries for an extended period in a joint international research program featuring the Russian-built Tu-144LL supersonic aircraft. The object of the program was to develop technologies for a proposed future second-generation supersonic airliner to be developed in the 21st Century. The aircraft's initial flight phase began in June 1996 and concluded in February 1998 after 19 research flights. A shorter follow-on program involving seven flights began in September 1998 and concluded in April 1999. All flights were conducted in Russia from Tupolev's facility at the Zhukovsky Air Development Center near Moscow. The centerpiece of the research program was the Tu 144LL, a first-generation Russian supersonic jetliner that was modified by its developer/builder, Tupolev ANTK (aviatsionnyy nauchno-tekhnicheskiy kompleks-roughly, aviation technical complex), into a flying laboratory for supersonic research. Using the Tu-144LL to conduct flight research experiments, researchers compared full-scale supersonic aircraft flight data with results from models in wind tunnels, computer-aided techniques, and other flight tests. The experiments provided unique aerodynamic, structures, acoustics, and operating environment data on supersonic passenger aircraft. Data collected from the research program was being used to develop the technology base for a proposed future American-built supersonic jetliner. Although actual development of such an advanced supersonic transport (SST) is currently on hold, commercial aviation

24 CFR 570.411 - Joint Community Development Program.

Code of Federal Regulations, 2013 CFR

2013-04-01

... awarded to institutions of higher education or to States and local governments applying jointly with institutions of higher education. Institutions of higher education must demonstrate the capacity to carry out... activities under title I means recent satisfactory activity by the institution of higher education's staff...

24 CFR 570.411 - Joint Community Development Program.

Code of Federal Regulations, 2014 CFR

2014-04-01

... awarded to institutions of higher education or to States and local governments applying jointly with institutions of higher education. Institutions of higher education must demonstrate the capacity to carry out... activities under title I means recent satisfactory activity by the institution of higher education's staff...

24 CFR 570.411 - Joint Community Development Program.

Code of Federal Regulations, 2012 CFR

2012-04-01

... awarded to institutions of higher education or to States and local governments applying jointly with institutions of higher education. Institutions of higher education must demonstrate the capacity to carry out... activities under title I means recent satisfactory activity by the institution of higher education's staff...

Joint FAM/Line Management Assessment Report on LLNL Machine Guarding Safety Program

DOE Office of Scientific and Technical Information (OSTI.GOV)

Armstrong, J. J.

2016-07-19

The LLNL Safety Program for Machine Guarding is implemented to comply with requirements in the ES&H Manual Document 11.2, "Hazards-General and Miscellaneous," Section 13 Machine Guarding (Rev 18, issued Dec. 15, 2015). The primary goal of this LLNL Safety Program is to ensure that LLNL operations involving machine guarding are managed so that workers, equipment and government property are adequately protected. This means that all such operations are planned and approved using the Integrated Safety Management System to provide the most cost effective and safest means available to support the LLNL mission.

7 CFR 3405.7 - Joint project proposals.

Code of Federal Regulations, 2010 CFR

2010-01-01

... Agriculture Regulations of the Department of Agriculture (Continued) COOPERATIVE STATE RESEARCH, EDUCATION, AND EXTENSION SERVICE, DEPARTMENT OF AGRICULTURE HIGHER EDUCATION CHALLENGE GRANTS PROGRAM Program... strengthening higher education in the food and agricultural sciences. The goals of such joint initiatives should...

Joint and tendon involvement predict disease progression in systemic sclerosis: a EUSTAR prospective study.

PubMed

Avouac, Jérôme; Walker, Ulrich A; Hachulla, Eric; Riemekasten, Gabriela; Cuomo, Giovanna; Carreira, Patricia E; Caramaschi, Paola; Ananieva, Lidia P; Matucci-Cerinic, Marco; Czirjak, Laszlo; Denton, Christopher; Ladner, Ulf Müller; Allanore, Yannick

2016-01-01

To determine whether joint synovitis and tendon friction rubs (TFRs) can predict the progression of systemic sclerosis (SSc) over time. We performed a prospective cohort study that included 1301 patients with SSc from the EUSTAR database with disease duration ≤3 years at inclusion and with a follow-up of at least 2 years. Presence or absence at clinical examination of synovitis and TFRs was extracted at baseline. Outcomes were skin, cardiovascular, renal and lung progression. Overall disease progression was defined according to the occurrence of at least one organ progression. Joint synovitis (HR: 1.26, 95% CI 1.01 to 1.59) and TFRs (HR: 1.32, 95% CI 1.03 to 1.70) were independently predictive of overall disease progression, as were also the diffuse cutaneous subset (HR: 1.30, 95% CI 1.05 to 1.61) and positive antitopoisomerase-I antibodies (HR: 1.25, 95% CI 1.02 to 1.53). Regarding skin progression, joint synovitis (HR: 1.67, 95% CI 1.06 to 2.64) and TFRs (HR: 1.69, 95% CI 1.02 to 2.77) were also independently predictive of worsening of the modified Rodnan skin score. For cardiovascular progression, joint synovitis was predictive of the occurrence of new digital ulcer(s) (HR: 1.45, 95% CI 1.08 to 1.96) and decreased left ventricular ejection fraction (HR: 2.20, 95% CI 1.06 to 4.57); TFRs were confirmed to be an independent predictor of scleroderma renal crisis (HR: 2.33, 95% CI 1.03 to 6.19). Joint synovitis and TFRs are independent predictive factors for disease progression in patients with early SSc. These easily detected clinical markers may be useful for the risk stratification of patients with SSc. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/

Achievements of the DOT-NASA Joint Program on Remote Sensing and Spatial Information Technologies: Application to Multimodal Transportation

NASA Technical Reports Server (NTRS)

2002-01-01

This report presents three-year accomplishments from the national program on Commercial Remote Sensing and Geospatial Technology (CRSGT) application to transportation, administered by the U.S. Department of Transportation (U.S. DOT) in collaboration with the National Aeronautics and Space Administration (NASA). The joint program was authorized under Section 5113 of the Transportation Equity Act for the 21st Century (TEA-21). This is the first national program of its type focusing on transportation applications of emerging commercial remote sensing technologies. U.S. DOT's Research and Special Programs Administration manages the program in coordination with NASA's Earth Science Enterprise's application programs. The program focuses on applications of CRSGT products and systems for providing smarter and more efficient transportation operations and services. The program is performed in partnership with four major National Consortia for Remote Sensing in Transportation (NCRST). Each consortium focuses on research and development of products in one of the four priority areas for transportation application, and includes technical application and demonstration projects carried out in partnership with industries and service providers in their respective areas. The report identifies products and accomplishments from each of the four consortia in meeting the goal of providing smarter and more efficient transportation services. The products and results emerging from the program are being implemented in transportation operations and services through state and local agencies. The Environmental Assessment and Application Consortium (NCRST-E) provides leadership for developing and deploying cost effective environmental and transportation planning services, and integrates CRSGT advances for achieving smarter and cost effective corridor planning. The Infrastructure Management Consortium (NCRST-I) provides leadership in technologies that achieve smarter and cheaper ways of managing

Efficacy of Caregiver-Mediated Joint Engagement Intervention for Young Children with Autism Spectrum Disorders

ERIC Educational Resources Information Center

Chiang, Chung-Hsin; Chu, Ching-Lin; Lee, Tsung-Chin

2016-01-01

Joint attention intervention for children with autism spectrum disorders was focused on improving joint engagement and joint attention skills. The purpose of this study was to develop a caregiver-mediated joint engagement intervention program combined with body movement play to investigate the effects of joint engagement/joint attention skills in…

Caregiver Involvement in the Intensive Mental Health Program: Influence on Changes in Child Functioning

ERIC Educational Resources Information Center

Richards, Margaret M.; Bowers, Mark J.; Lazicki, Tammy; Krall, Dan; Jacobs, Anne K.

2008-01-01

We examined behavioral markers of caregiver involvement and the ways in which family participation was related to treatment outcomes in 47 elementary school children with SED enrolled in a school-based intensive mental health program. Measures of caregiver involvement included therapeutic home visits, attendance at therapeutic meetings, completion…

A 3-Year Study of a School-Based Parental Involvement Program in Early Literacy

ERIC Educational Resources Information Center

Crosby, Susan Ann; Rasinski, Timothy; Padak, Nancy; Yildirim, Kasim

2015-01-01

Although parental involvement in children's literacy development has been recognized for its potential in helping children develop early literacy achievement, studies of the effectiveness and sustainability of school-based parent involvement programs are not numerous. This study examines the effectiveness and durability of a school-based…

Impact of the Joint Task Force on Undergraduate Physics Programs for Innovation and Entrepreneurship Education in Physics

NASA Astrophysics Data System (ADS)

Arion, Douglas

The Joint Task Force on Undergraduate Physics Programs has worked diligently to develop recommendations for what physics programs could and should be doing to prepare graduates for 21st century careers. While the `traditional' physics curriculum has served for many years, the demands of the new workforce, and the recognition that only a few percent of physics students actually become faculty - the vast majority entering the workforce and applying their skills to a very diverse range of problems, projects, and products - implies that a review of the education undergraduates receives is in order. The outcomes of this study point to the need to provide greater connection between the education process and the actual skills, knowledge, and abilities that the workplace demands. This presentation will summarize these considerations, and show how entrepreneurship and innovation programs and curricula are a particularly effective means of bringing these elements to physics students.

Patient involvement in research programming and implementation: A responsive evaluation of the Dialogue Model for research agenda setting.

PubMed

Abma, Tineke A; Pittens, Carina A C M; Visse, Merel; Elberse, Janneke E; Broerse, Jacqueline E W

2015-12-01

The Dialogue Model for research agenda-setting, involving multiple stakeholders including patients, was developed and validated in the Netherlands. However, there is little insight into whether and how patient involvement is sustained during the programming and implementation of research agendas. To understand how the Dialogue Model can be optimised by focusing on programming and implementation, in order to stimulate the inclusion of (the perspectives of) patients in research. A responsive evaluation of the programming and implementation phases of nine agenda-setting projects that had used the Dialogue Model for agenda-setting was conducted. Fifty-four semi-structured interviews were held with different stakeholders (patients, researchers, funding agencies). Three focus groups with patients, funding agencies and researchers (16 participants) were organized to validate the findings. Patient involvement in programming and implementation of the research agendas was limited. This was partly related to poor programming and implementation, partly to pitfalls in earlier phases of the agenda-setting. Optimization of the Dialogue Model is possible by attending to the nature of the agenda and its intended use in earlier phases. Attention should also be given to the ambassadors and intended users of agenda topics. Support is needed during programming and implementation to organize patient involvement and adapt organizational structures like review procedures. In all phases the attitude to patient involvement, stakeholder participation, especially of researchers, and formal and informal relationships between parties need to be addressed to build a strong relationship with a shared goal. Patient involvement in agenda-setting is not automatically followed by patient involvement in programming and implementation. More attention should be paid, in earlier stages, to the attitude and engagement of researchers and funding agencies. © 2014 John Wiley & Sons Ltd.

The Mars Technology Program

NASA Technical Reports Server (NTRS)

Hayati, Samad A.

2002-01-01

Future Mars missions require new capabilities that currently are not available. The Mars Technology Program (MTP) is an integral part of the Mars Exploration Program (MEP). Its sole purpose is to assure that required technologies are developed in time to enable the baselined and future missions. The MTP is a NASA-wide technology development program managed by JPL. It is divided into a Focused Program and a Base Program. The Focused Program is tightly tied to the proposed Mars Program mission milestones. It involves time-critical deliverables that must be developed in time for infusion into the proposed Mars 2005, and, 2009 missions. In addition a technology demonstration mission by AFRL will test a LIDAR as part of a joint NASNAFRL experiment. This program bridges the gap between technology and projects by vertically integrating the technology work with pre-project development in a project-like environment with critical dates for technology infusion. A Base Technology Program attacks higher riskhigher payoff technologies not in the critical path of missions.

Aircraft and ground vehicle friction correlation test results obtained under winter runway conditions during joint FAA/NASA Runway Friction Program

NASA Technical Reports Server (NTRS)

Yager, Thomas J.; Vogler, William A.; Baldasare, Paul

1988-01-01

Aircraft and ground vehicle friction data collected during the Joint FAA/NASA Runway Friction Program under winter runway conditions are discussed and test results are summarized. The relationship between the different ground vehicle friction measurements obtained on compacted snow- and ice-covered conditions is defined together with the correlation to aircraft tire friction performance under similar runway conditions.

Joint Task Force on Undergraduate Physics Programs (J-TUPP): Overview and Major Findings

NASA Astrophysics Data System (ADS)

Heron, Paula

2016-03-01

The Joint Task Force on Undergraduate Physics Programs (JTUPP) was formed in response to growing awareness in the physics community that physics majors pursue a wide range of careers after graduation, with very few ending up in academia. The task force is charged with identifying the skills and knowledge that undergraduate physics degree holders should possess to be well prepared for a diverse set of careers, and providing guidance for physicists considering revising the undergraduate curriculum to improve the education of a diverse student population. Task force members represent large and small universities, professional societies, and industry, and have expertise in a broad range of areas including entrepreneurship, physics education research and systemic change in education. We reviewed employment data, surveys of employers, and reports generated by other disciplines. We also met with physicists in selected industries to get their views on the strengths and weaknesses of physics graduates, commissioned a series of interviews with recent physics graduates employed in the private sector, and identified exemplary programs that ensure that all of their students are well prepared to pursue a wide range of career paths. The findings and recommendations will be summarized.

Dark Skies Awareness Programs for the International Year of Astronomy: Involvement, Outcomes and Sustainability

NASA Astrophysics Data System (ADS)

Walker, Constance E.

2010-01-01

The preservation of dark skies is a growing global concern, yet it is one of the easiest environmental problems people can address on local levels. For this reason, the goal of the IYA Dark Skies Awareness Cornerstone Project is to raise public awareness of the impact of artificial lighting on local environments by getting people worldwide involved in a variety of programs. These programs provide resources on light pollution for new technologies like a presence in Second Life and podcasts, for local thematic events at national parks and observatory open houses, for international thematic events like International Dark Skies Week and Earth Hour, for a program in the arts like an international photo contest, for global citizen-science programs that measure night sky brightness worldwide, and for educational materials like a kit with a light shielding demonstration. These programs have been successfully used around the world during IYA to raise awareness of the effects of light pollution on public health, economic issues, ecological consequences, energy conservation, safety and security, and astronomy. The presentation will provide an update, take a look ahead at the project's sustainability, and describe how people can be involved in the future. Information about the programs is at www.darkskiesawareness.org.

7 CFR 1400.203 - Joint operations.

Code of Federal Regulations, 2010 CFR

2010-01-01

... OF AGRICULTURE GENERAL REGULATIONS AND POLICIES PAYMENT LIMITATION AND PAYMENT ELIGIBILITY FOR 2009 AND SUBSEQUENT CROP, PROGRAM, OR FISCAL YEARS Payment Eligibility § 1400.203 Joint operations. (a) A...

Parent Involvement in Head Start Programs: The Role of Parent, Teacher and Classroom Characteristics

ERIC Educational Resources Information Center

Castro, D.C.; Bryant, D.M.; Peisner-Feinberg, E.S.; Skinner, M.L.

2004-01-01

The purposes of this study were to determine the extent and types of parent involvement in Head Start programs, and to examine the relations between parent participation and family, teacher and classroom characteristics. Parents (n = 1131) and teachers (n = 59) from four Head Start programs participated. Data were gathered through volunteer logs,…

Prosthetic joint infection caused by Granulicatella adiacens: a case series and review of literature.

PubMed

Quénard, Fanny; Seng, Piseth; Lagier, Jean-Christophe; Fenollar, Florence; Stein, Andreas

2017-06-23

Bone and joint infection involving Granulicatella adiacens is rare, and mainly involved in cases of bacteremia and infectious endocarditis. Here we report three cases of prosthetic joint infection involving G. adiacens that were successfully treated with surgery and prolonged antimicrobial treatment. We also review the two cases of prosthetic joint infection involving G. adiacens that are reported in the literature. Not all five cases of prosthetic joint infection caused by G. adiacens were associated with bacteremia or infectious endocarditis. Dental care before the onset of infection was observed in two cases. The median time delay between arthroplasty implantation and the onset of infection was of 4 years (ranging between 2 and 10 years). One of our cases was identified with 16srRNA gene sequencing, one case with MALDI-TOF mass spectrometry, and one case with both techniques. Two literature cases were diagnosed by 16srRNA gene sequencing. All five cases were cured after surgery including a two-stage prosthesis exchange in three cases, a one-stage prosthesis exchange in one case, and debridement, antibiotics, irrigation, and retention of the prosthesis in one case, and prolonged antimicrobial treatment. Prosthetic joint infection involving G. adiacens is probably often dismissed due to difficult culture or misdiagnosis, in particular in the cases of polymicrobial infection. Debridement, antibiotics, irrigation, and retention of the prosthesis associated with prolonged antimicrobial treatment (≥ 8 weeks) should be considered as a treatment strategy for prosthetic joint infection involving G. adiacens.

The Impact of a Collaborative Family Involvement Program on Latino Families and Children's Educational Performance

ERIC Educational Resources Information Center

O'Donnell, Julie; Kirkner, Sandra L.

2014-01-01

Latino families highly value education and are committed to their children's educational success; however, Latino students often experience educational challenges. Well-designed family involvement programs can encourage Latino families, especially new immigrants or monolingual Spanish-speakers, to increase their involvement resulting in positive…

Child Health Partnerships: a review of program characteristics, outcomes and their relationship.

PubMed

Jayaratne, Kapila; Kelaher, Margaret; Dunt, David

2010-06-17

Novel approaches are increasingly employed to address the social determinants of health of children world-wide. Such approaches have included complex social programs involving multiple stakeholders from different sectors jointly working together (hereafter Child Health Partnerships). Previous reviews have questioned whether these programs have led to significant improvements in child health and related outcomes. We aim to provide definitive answers to this question as well as identifying the characteristics of successful partnerships. A comprehensive literature search identified 11 major Child Health Partnerships in four comparable developed countries. A critical review is focused on various aspects of these including their target groups, program mechanics and outcomes. There was evidence of success in several major areas from the formation of effective joint operations of partners in different partnership models to improvement in both child wellbeing and parenting. There is emerging evidence that Child Health Partnerships are cost-effective. Population characteristics and local contexts need to be taken into account in the introduction and implementation of these programs.

Parents and Federal Education Programs. Volume 4: Title VII. The Study of Parental Involvement.

ERIC Educational Resources Information Center

Cadena-Munoz, Raquel; Keesling, J. Ward

This fourth volume in a seven-volume study is part of a larger study of parental involvement in four federal programs in selected school districts across the country. Presented here are results of an intensive examination of school district programs funded by Title VII of the Elementary and Secondary Education Act. Site studies of Title VII…

JOMAR: Joint Operations with Mobile Autonomous Robots

DTIC Science & Technology

2015-12-21

AFRL-AFOSR-JP-TR-2015-0009 JOMAR: Joint Operations with Mobile Autonomous Robots Edwin Olson UNIVERSITY OF MICHIGAN Final Report 12/21/2015...SUBTITLE JOMAR: Joint Operations with Mobile Autonomous Robots 5a. CONTRACT NUMBER FA23861114024 5b. GRANT NUMBER 5c. PROGRAM ELEMENT NUMBER 6...14. ABSTRACT Under this grant, we formulated and implemented a variety of novel algorithms that address core problems in multi- robot systems. These

The Decline and Fall of Joint Acquisition Programs

DTIC Science & Technology

2014-04-30

S) 12. DISTRIBUTION/AVAILABILITY STATEMENT Approved for public release; distribution unlimited 13. SUPPLEMENTARY NOTES 14. ABSTRACT Studies have...Massachusetts Institute of Technology Ed Crawley, Massachusetts Institute of Technology Acquisition Risks in a World of Joint Capabilities: A Study of...University and a graduate assistant in the CERT Insider Threat Center. In addition to information security, Collins has focused his graduate studies

Simulating the Structural Response of a Preloaded Bolted Joint

NASA Technical Reports Server (NTRS)

Knight, Norman F., Jr.; Phillips, Dawn R.; Raju, Ivatury S.

2008-01-01

The present paper describes the structural analyses performed on a preloaded bolted-joint configuration. The joint modeled was comprised of two L-shaped structures connected together using a single bolt. Each L-shaped structure involved a vertical flat segment (or shell wall) welded to a horizontal segment (or flange). Parametric studies were performed using elasto-plastic, large-deformation nonlinear finite element analyses to determine the influence of several factors on the bolted-joint response. The factors considered included bolt preload, washer-surface-bearing size, edge boundary conditions, joint segment length, and loading history. Joint response is reported in terms of displacements, gap opening, and surface strains. Most of the factors studied were determined to have minimal effect on the bolted-joint response; however, the washer-bearing-surface size affected the response significantly.

Development of a metrics dashboard for monitoring involvement in the 340B Drug Pricing Program.

PubMed

Karralli, Rusol; Tipton, Joyce; Dumitru, Doina; Scholz, Lisa; Masilamani, Santhi

2015-09-01

An electronic tool to support hospital organizations in monitoring and addressing financial and compliance challenges related to participation in the 340B Drug Pricing Program is described. In recent years there has been heightened congressional and regulatory scrutiny of the federal 340B program, which provides discounted drug prices on Medicaid-covered drugs to safety net hospitals and other 340B-eligible healthcare organizations, or "covered entities." Historically, the 340B program has lacked a metrics-driven reporting framework to help covered entities capture the value of 340B program involvement, community benefits provided to underserved populations, and costs associated with compliance with 340B eligibility requirements. As part of an initiative by a large health system to optimize its 340B program utilization and regulatory compliance efforts, a team of pharmacists led the development of an electronic dashboard tool to help monitor 340B program activities at the system's 340B-eligible facilities. After soliciting input from an array of internal and external 340B program stakeholders, the team designed the dashboard and associated data-entry tools to facilitate the capture and analysis of 340B program-related data in four domains: cost savings and revenue, program maintenance costs, community benefits, and compliance. A large health system enhanced its ability to evaluate and monitor 340B program-related activities through the use of a dashboard tool capturing key metrics on cost savings achieved, maintenance costs, and other aspects of program involvement. Copyright © 2015 by the American Society of Health-System Pharmacists, Inc. All rights reserved.

Instrumental Relationships: A Potential Relational Model for Inner-City Youth Programs

ERIC Educational Resources Information Center

Halpern, Robert

2005-01-01

In this article, a distinct type of adult-youth relationship found in some youth programs and characterized as instrumental is discussed. Such relationships focus primarily on joint work on a task or project, or in a discipline, with the adult having expertise and a strong identity in the substantive domain involved, rather than in youth work per…

Progressive Damage Analysis of Bonded Composite Joints

NASA Technical Reports Server (NTRS)

Leone, Frank A., Jr.; Girolamo, Donato; Davila, Carlos G.

2012-01-01

The present work is related to the development and application of progressive damage modeling techniques to bonded joint technology. The joint designs studied in this work include a conventional composite splice joint and a NASA-patented durable redundant joint. Both designs involve honeycomb sandwich structures with carbon/epoxy facesheets joined using adhesively bonded doublers.Progressive damage modeling allows for the prediction of the initiation and evolution of damage within a structure. For structures that include multiple material systems, such as the joint designs under consideration, the number of potential failure mechanisms that must be accounted for drastically increases the complexity of the analyses. Potential failure mechanisms include fiber fracture, intraply matrix cracking, delamination, core crushing, adhesive failure, and their interactions. The bonded joints were modeled using highly parametric, explicitly solved finite element models, with damage modeling implemented via custom user-written subroutines. Each ply was discretely meshed using three-dimensional solid elements. Layers of cohesive elements were included between each ply to account for the possibility of delaminations and were used to model the adhesive layers forming the joint. Good correlation with experimental results was achieved both in terms of load-displacement history and the predicted failure mechanism(s).

Experimental characterization of deployable trusses and joints

NASA Technical Reports Server (NTRS)

Ikegami, R.; Church, S. M.; Keinholz, D. A.; Fowler, B. L.

1987-01-01

The structural dynamic properties of trusses are strongly affected by the characteristics of joints connecting the individual beam elements. Joints are particularly significant in that they are often the source of nonlinearities and energy dissipation. While the joints themselves may be physically simple, direct measurement is often necessary to obtain a mathematical description suitable for inclusion in a system model. Force state mapping is a flexible, practical test method for obtaining such a description, particularly when significant nonlinear effects are present. It involves measurement of the relationship, nonlinear or linear, between force transmitted through a joint and the relative displacement and velocity across it. An apparatus and procedure for force state mapping are described. Results are presented from tests of joints used in a lightweight, composite, deployable truss built by the Boeing Aerospace Company. The results from the joint tests are used to develop a model of a full 4-bay truss segment. The truss segment was statically and dynamically tested. The results of the truss tests are presented and compared with the analytical predictions from the model.

Involvement of peripheral and spinal tumor necrosis factor α in spinal cord hyperexcitability during knee joint inflammation in rats.

PubMed

König, Christian; Zharsky, Maxim; Möller, Christian; Schaible, Hans-Georg; Ebersberger, Andrea

2014-03-01

Tumor necrosis factor α (TNFα) is produced not only in peripheral tissues, but also in the spinal cord. The purpose of this study was to address the potential of peripheral and spinal TNFα to induce and maintain spinal hyperexcitability, which is a hallmark of pain states in the joints during rheumatoid arthritis and osteoarthritis. In vivo recordings of the responses of spinal cord neurons to nociceptive knee input under normal conditions and in the presence of experimental knee joint inflammation were obtained in anesthetized rats. TNFα, etanercept, or antibodies to TNF receptors were applied to either the knee joint or the spinal cord surface. Injection of TNFα into the knee joint cavity increased the responses of spinal cord neurons to mechanical joint stimulation, and injection of etanercept into the knee joint reduced the inflammation-evoked spinal activity. These spinal effects closely mirrored the induction and reduction of peripheral sensitization. Responses to joint stimulation were also enhanced by spinal application of TNFα, and spinal application of either etanercept or anti-TNF receptor type I significantly attenuated the generation of inflammation-evoked spinal hyperexcitability, which is characterized by widespread pain sensitization beyond the inflamed joint. Spinally applied etanercept did not reduce established hyperexcitability in the acute kaolin/carrageenan model. In antigen-induced arthritis, etanercept decreased spinal responses on day 1, but not on day 3. While peripheral TNFα increases spinal responses to joint stimulation, spinal TNFα supports the generation of the full pattern of spinal hyperexcitability. However, established spinal hyperexcitability may be maintained by downstream mechanisms that are independent of spinal TNFα. Copyright © 2014 by the American College of Rheumatology.

Research on the Implementation of the NASA Joint Sponsored Research Program and other Innovative Mechanism for Commercializing NASA Funded Technologies

NASA Technical Reports Server (NTRS)

Robbins, Karen Risa

1997-01-01

A goal of the ERAST Program is the commercial application of technology resulting from the work if the ERAST Alliance. This goal is sufficiently primary to be called out in the recitals section of the ERAST Joint Sponsored Research Agreement. In support of this goal, two activities described below were commenced in 1996 to assess and explore commercial applications of UAV technologies relevant to the ERAST Alliance.

[Pigmented villonodular synovitis of the temporo mandibular joint. Differential diagnosis and therapy].

PubMed

Kunz, C; Leiggener, C S; Fridrich, K; Schmuziger, N; Hammer, B

2003-07-01

For the temporomandibular joint (TMJ), functional disorders are common but tumors and tumor like lesions are rare, although these are often mistaken for functional ailments. Early examination by computed tomography or, as a method of choice, magnetic resonance imaging is recommended in case of persisting TMJ problems. Pigmented villonodular synovitis (PVNS) is a rare benign but locally destructive fibrohistiocytic lesion originating in synovial tissue. Involvement of the temporomandibular joint is extremely rare, with the average age of patients being 44.6 years. This paper reports on a 13-year-old patient with diffuse PVNS involving the middle ear and middle cranial fossa. The treatment of choice involves wide local excision and reconstruction of the temporomandibular joint with long-term follow-up. Pathogenesis and differential diagnosis are discussed.

Solder Joint Health Monitoring Testbed

NASA Technical Reports Server (NTRS)

Delaney, Michael M.; Flynn, James; Browder, Mark

2009-01-01

A method of monitoring the health of selected solder joints, called SJ-BIST, has been developed by Ridgetop Group Inc. under a Small Business Innovative Research (SBIR) contract. The primary goal of this research program is to test and validate this method in a flight environment using realistically seeded faults in selected solder joints. An additional objective is to gather environmental data for future development of physics-based and data-driven prognostics algorithms. A test board is being designed using a Xilinx FPGA. These boards will be tested both in flight and on the ground using a shaker table and an altitude chamber.

Knee joint stabilization therapy in patients with osteoarthritis of the knee: a randomized, controlled trial.

PubMed

Knoop, J; Dekker, J; van der Leeden, M; van der Esch, M; Thorstensson, C A; Gerritsen, M; Voorneman, R E; Peter, W F; de Rooij, M; Romviel, S; Lems, W F; Roorda, L D; Steultjens, M P M

2013-08-01

To investigate whether an exercise program, initially focusing on knee stabilization and subsequently on muscle strength and performance of daily activities is more effective than an exercise program focusing on muscle strength and performance of daily activities only, in reducing activity limitations in patients with knee osteoarthritis (OA) and instability of the knee joint. A single-blind, randomized, controlled trial involving 159 knee OA patients with self-reported and/or biomechanically assessed knee instability, randomly assigned to two treatment groups. Both groups received a supervised exercise program for 12 weeks, consisting of muscle strengthening exercises and training of daily activities, but only in the experimental group specific knee joint stabilization training was provided. Outcome measures included activity limitations (Western Ontario and McMaster Universities Osteoarthritis Index - WOMAC physical function, primary outcome), pain, global perceived effect and knee stability. Both treatment groups demonstrated large (∼20-40%) and clinically relevant reductions in activity limitations, pain and knee instability, which were sustained 6 months post-treatment. No differences in effectiveness between experimental and control treatment were found on WOMAC physical function (B (95% confidence interval - CI) = -0.01 (-2.58 to 2.57)) or secondary outcome measures, except for a higher global perceived effect in the experimental group (P = 0.04). Both exercise programs were highly effective in reducing activity limitations and pain and restoring knee stability in knee OA patients with instability of the knee. In knee OA patients suffering from knee instability, specific knee joint stabilization training, in addition to muscle strengthening and functional exercises, does not seem to have any additional value. Dutch Trial Register (NTR) registration number: NTR1475. Copyright © 2013 Osteoarthritis Research Society International. Published by Elsevier

Can physical joint simulators be used to anticipate clinical wear problems of new joint replacement implants prior to market release?

PubMed

Medley, John B

2016-05-01

One of the most important mandates of physical joint simulators is to provide test results that allow the implant manufacturer to anticipate and perhaps avoid clinical wear problems with their new products. This is best done before market release. This study gives four steps to follow in conducting such wear simulator testing. Two major examples involving hip wear simulators are discussed in which attempts had been made to predict clinical wear performance prior to market release. The second one, involving the DePuy ASR implant systems, is chosen for more extensive treatment by making it an illustrative example to explore whether wear simulator testing can anticipate clinical wear problems. It is concluded that hip wear simulator testing did provide data in the academic literature that indicated some risk of clinical wear problems prior to market release of the ASR implant systems. This supports the idea that physical joint simulators have an important role in the pre-market testing of new joint replacement implants. © IMechE 2016.

Formation of a physiological reverse shoulder joint.

PubMed

Lerner, Markus; Turkmen, Ismail; Bernd, Ludger

2016-01-20

Congenital shoulder deformities are rarely seen in orthopaedic practice. Proximal humeral defects and glenoid hypoplasia have been reported separately in the literature. We present a case involving a 31-year-old woman having a cosmetic problem with her upper arm who was diagnosed with reverse shoulder joint deformity. This article presents the clinical, radiological and biomechanical findings of a physiological reverse shoulder joint. This is the first such reported case. 2016 BMJ Publishing Group Ltd.

7 CFR 760.113 - Refunds; joint and several liability.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 7 Agriculture 7 2010-01-01 2010-01-01 false Refunds; joint and several liability. 760.113 Section... Agricultural Disaster Assistance Programs § 760.113 Refunds; joint and several liability. (a) In the event that... provided that interest will in all cases run from the date of the original disbursement. (b) All persons...

Identification of Nonlinear Micron-Level Mechanics for a Precision Deployable Joint

NASA Technical Reports Server (NTRS)

Bullock, S. J.; Peterson, L. D.

1994-01-01

The experimental identification of micron-level nonlinear joint mechanics and dynamics for a pin-clevis joint used in a precision, adaptive, deployable space structure are investigated. The force-state mapping method is used to identify the behavior of the joint under a preload. The results of applying a single tension-compression cycle to the joint under a tensile preload are presented. The observed micron-level behavior is highly nonlinear and involves all six rigid body motion degrees-of-freedom of the joint. it is also suggests that at micron levels of motion modelling of the joint mechanics and dynamics must include the interactions between all internal components, such as the pin, bushings, and the joint node.

Parents and Federal Education Programs. Volume 1: The Nature, Causes, and Consequences of Parental Involvement. The Study of Parental Involvement.

ERIC Educational Resources Information Center

Melaragno, Ralph J.; And Others

Intended to provide a comprehensive view of parental involvement in school districts receiving federal education funds, this study collected data on four federal programs in 57 projects across the country. Titles I and VII of the Elementary Secondary Education Act, the Emergency School Aid Act, and Follow Through were examined. The entire study is…

Joint Services Electronics Program

DTIC Science & Technology

1991-03-05

Parallel Computing Network and Program Professor Abhiram Ranade with M.T. Raghunath and Robert Boothe The goal of our research is to develop high...References/Publications [1] M. T. Raghunath and A. 0. Ranade. "A Simulation-Based Comparison of Interconnection Networks," Proceedings of the 2nd IEEE

Medicare Program; Comprehensive Care for Joint Replacement Payment Model for Acute Care Hospitals Furnishing Lower Extremity Joint Replacement Services. Final rule.

PubMed

2015-11-24

This final rule implements a new Medicare Part A and B payment model under section 1115A of the Social Security Act, called the Comprehensive Care for Joint Replacement (CJR) model, in which acute care hospitals in certain selected geographic areas will receive retrospective bundled payments for episodes of care for lower extremity joint replacement (LEJR) or reattachment of a lower extremity. All related care within 90 days of hospital discharge from the joint replacement procedure will be included in the episode of care. We believe this model will further our goals in improving the efficiency and quality of care for Medicare beneficiaries with these common medical procedures.

An Exploration of How Involvement in a Freshman Retention Program Relates to Intention to Complete an Undergraduate Degree

ERIC Educational Resources Information Center

Clounch, Teresa Lynn

2010-01-01

The study examined the relationship of the level and type of involvement of freshman students in the Hawk Link Retention Program, a first-year program at the University of Kansas, to intent to return and graduate. The study found that participants were retained at a high level but that their type and level of involvement were not related to…

Self-referenced processing, neurodevelopment and joint attention in autism.

PubMed

Mundy, Peter; Gwaltney, Mary; Henderson, Heather

2010-09-01

This article describes a parallel and distributed processing model (PDPM) of joint attention, self-referenced processing and autism. According to this model, autism involves early impairments in the capacity for rapid, integrated processing of self-referenced (proprioceptive and interoceptive) and other-referenced (exteroceptive) information. Measures of joint attention have proven useful in research on autism because they are sensitive to the early development of the 'parallel' and integrated processing of self- and other-referenced stimuli. Moreover, joint attention behaviors are a consequence, but also an organizer of the functional development of a distal distributed cortical system involving anterior networks including the prefrontal and insula cortices, as well as posterior neural networks including the temporal and parietal cortices. Measures of joint attention provide early behavioral indicators of atypical development in this parallel and distributed processing system in autism. In addition it is proposed that an early, chronic disturbance in the capacity for integrating self- and other-referenced information may have cascading effects on the development of self awareness in autism. The assumptions, empirical support and future research implications of this model are discussed.

RSRM Nozzle-to-Case Joint J-leg Development

NASA Technical Reports Server (NTRS)

Albrechtsen, Kevin U.; Eddy, Norman F.; Ewing, Mark E.; McGuire, John R.

2003-01-01

Since the beginning of the Space Shuttle Reusable Solid Rocket Motor (RSRM) program, nozzle-to-case joint polysulfide adhesive gas paths have occurred on several flight motors. These gas paths have allowed hot motor gases to reach the wiper O-ring. Even though these motors continue to fly safely with this condition, a desire was to reduce such occurrences. The RSRM currently uses a J-leg joint configuration on case field joints and igniter inner and outer joints. The J-leg joint configuration has been successfully demonstrated on numerous RSRM flight and static test motors, eliminating hot gas intrusion to the critical O-ring seals on these joints. Using the proven technology demonstrated on the case field joints and igniter joints, a nozzle-to-case joint J-leg design was developed for implementation on RSRM flight motors. This configuration provides an interference fit with nozzle fixed housing phenolics at assembly, with a series of pressurization gaps incorporated outboard of the joint mating surface to aid in joint pressurization and to eliminate any circumferential flow in this region. The joint insulation is bonded to the nozzle phenolics using the same pressure sensitive adhesive used in the case field joints and igniter joints. An enhancement to the nozzle-to-case joint J-leg configuration is the implementation of a carbon rope thermal barrier. The thermal barrier is located downstream of the joint bondline and is positioned within the joint in a manner where any hot gas intrusion into the joint passes through the thermal barrier, reducing gas temperatures to a level that would not affect O-rings downstream of the thermal barrier. This paper discusses the processes used in reaching a final nozzle-to-case joint J-leg design, provides structural and thermal results in support of the design, and identifies fabrication techniques and demonstrations used in arriving at the final configuration.

Study on the effectiveness of the kinetic method in patients with rheumatic diseases and temporomandibular joint dysfunction.

PubMed

Havriş, Maria Daniela; Ancuţa, Codrina; Iordache, Cristina; Chirieac, Rodica Marieta

2012-01-01

Selecting the appropriate treatment decision is essential for achieving optimal results in the management of algo-dysfunctional syndrome of the temporo-mandibular joint (TMJD). The study aims to decide on the most effective (symptomatic control, preserved motility) kinetic program in patients with TMJ involvement. prospective observational study on 83 consecutive patients with rheumatic diseases and TMJ dysfunction. Clinical assessment (pain, noises, muscle spasm, range of motion, ROM) was performed at baseline and after 3 months of specific kinetic rehabilitation program. Change in clinical parameters and TM3 index was reported, p<0.05. over 45% TMJ involvement at baseline as defined by TMJ index (mean value of 13.56) and only 36.66% at 3 months (p<0.05). Significant improvement in pain (presence, severity) was demonstrated at 3 moths (p<0.05): 18.05% spontaneous pain, 75.9% provoked pain, with 12.11% respectively 2.41% decreased in nocturnal respectively diurnal pain. Significant decrease (p<0.05) in joint noises at movements: 27.71% when opening and 12.04% when closing the mouth, 8.43 at protrusion and 3.61% at retraction, while 18% at the side movements. Complex accurate kinetic reeducation is mandatory for achieving correct posture (head, neck and trunk), normal mastication, swallowing and respiration, as well as correction of neuromuscular imbalances in patients with TMJD secondary to rheumatic disorders.

Recent Flight Test Results of the Joint CIAM-NASA Mach 6.5 Scramjet Flight Program

NASA Technical Reports Server (NTRS)

Roudakov, Alexander S.; Semenov, Vyacheslav L.; Hicks, John W.

1998-01-01

Under a contract with NASA, a joint Central Institute of Aviation Motors (CIAM) and NASA team recently conducted the fourth flight test of a dual-mode scramjet aboard the CIAM Hypersonic Flying Laboratory, 'Kholod'. With an aim test Mach 6.5 objective, the successful launch was conducted at the Sary Shagan test range in central Kazakstan on February 12, 1998. Ground-launch, rocket boosted by a modified Russian SA5 missile, the redesigned scramjet was accelerated to a new maximum velocity greater than Mach 6.4. This launch allowed for the measurement of the fully supersonic combustion mode under actual flight conditions. The primary program objective was the flight-to-ground correlation of measured data with preflight analysis and wind-tunnel tests in Russia and potentially in the United States. This paper describes the development and objectives of the program as well as the technical details of the scramjet and SA5 redesign to achieve the Mach 6.5 aim test condition. An overview of the launch operation is also given. Finally, preliminary flight test results are presented and discussed.

Inspiring the Next Generation of Explorers: Scientist Involvement in the Expedition Earth and Beyond Program

NASA Technical Reports Server (NTRS)

Graff, Paige; Stefanov, William; Willis, Kim; Runco, Susan

2012-01-01

Scientists, science experts, graduate and even undergraduate student researchers have a unique ability to inspire the next generation of explorers. These science, technology, engineering, and mathematics (STEM) experts can serve as role models for students and can help inspire them to consider future STEM-related careers. They have an exceptional ability to instill a sense of curiosity and fascination in the minds of students as they bring science to life in the classroom. Students and teachers are hungry for opportunities to interact with scientists. They feel honored when these experts take time out of their busy day to share their science, their expertise, and their stories. The key for teachers is to be cognizant of opportunities to connect their students with scientists. For scientists, the key is to know how to get involved, to have options for participation that involve different levels of commitment, and to work with educational specialists who can help facilitate their involvement. The Expedition Earth and Beyond (EEAB) Program, facilitated by the Astromaterials Research and Exploration Science (ARES) Directorate at the NASA Johnson Space Center, is an Earth and planetary science education program designed to inspire, engage, and educate teachers and students by getting them actively involved with NASA exploration, discovery, and the process of science. One of the main goals of the program is to facilitate student research in the classroom. The program uses astronaut photographs, provided through the ARES Crew Earth Observations (CEO) payload on the International Space Station (ISS) as the hook to help students gain an interest in a research topic. Student investigations can focus on Earth or involve comparative planetology. Student teams are encouraged to use additional imagery and data from Earth or planetary orbital spacecraft, or ground-based data collection tools, to augment the astronaut photography dataset. A second goal of the program is to provide

Inspiring the Next Generation of Explorers: Scientist Involvement in the Expedition Earth and Beyond Program

NASA Astrophysics Data System (ADS)

Graff, P. V.; Stefanov, W. L.; Willis, K.; Runco, S.

2012-12-01

Scientists, science experts, graduate and even undergraduate student researchers have a unique ability to inspire the next generation of explorers. These science, technology, engineering, and mathematics (STEM) experts can serve as role models for students and can help inspire them to consider future STEM-related careers. They have an exceptional ability to instill a sense of curiosity and fascination in the minds of students as they bring science to life in the classroom. Students and teachers are hungry for opportunities to interact with scientists. They feel honored when these experts take time out of their busy day to share their science, their expertise, and their stories. The key for teachers is to be cognizant of opportunities to connect their students with scientists. For scientists, the key is to know how to get involved, to have options for participation that involve different levels of commitment, and to work with educational specialists who can help facilitate their involvement. The Expedition Earth and Beyond (EEAB) Program, facilitated by the Astromaterials Research and Exploration Science (ARES) Directorate at the NASA Johnson Space Center, is an Earth and planetary science education program designed to inspire, engage, and educate teachers and students by getting them actively involved with NASA exploration, discovery, and the process of science. One of the main goals of the program is to facilitate student research in the classroom. The program uses astronaut photographs, provided through the ARES Crew Earth Observations (CEO) payload on the International Space Station (ISS) as the hook to help students gain an interest in a research topic. Student investigations can focus on Earth or involve comparative planetology. Student teams are encouraged to use additional imagery and data from Earth or planetary orbital spacecraft, or ground-based data collection tools, to augment the astronaut photography dataset. A second goal of the program is to provide

Working Partnerships: A Joint Venture in Vocational Education.

ERIC Educational Resources Information Center

Campbell, Clifton P.

Joint Ventures in Vocational Education projects link participating businesses with secondary vocational programs in a cooperative relationship. These are voluntary arrangements between vocational programs and a public or private sector agency that combine the energies and resources of the partners to enrich various aspects of the vocational…

Percutaneous CT-Guided Treatment of Osteochondritis Dissecans of the Sacroiliac Joint

DOE Office of Scientific and Technical Information (OSTI.GOV)

Becce, Fabio, E-mail: fabio.becce@chuv.ch; Mouhsine, Elyazid; Mosimann, Pascal John

2012-08-15

Osteochondritis dissecans (OCD) is a joint disorder that affects the articular cartilage and subchondral bone, most commonly at the knee. OCD of the sacroiliac joint is extremely rare. Management of OCD remains controversial, and surgery is often needed, especially when conservative treatment fails. We present a rare case of OCD involving the left sacroiliac joint successfully treated by percutaneous computed tomography-guided retrograde drilling and debridement.

Interventions aimed at reducing obesity in early childhood: a meta-analysis of programs that involve parents.

PubMed

Yavuz, H Melis; van Ijzendoorn, Marinus H; Mesman, Judi; van der Veek, Shelley

2015-06-01

Obesity is a growing problem even in very young childhood, resulting in high costs for individuals and society. As a response, numerous obesity prevention and intervention programs have been developed. Previous research has shown that early intervention programs are more effective when parents are involved, but the effectiveness of specific aspects of programs with parental involvement has not been investigated. This meta-analysis aims to investigate the features related to the effectiveness of different types of obesity intervention programs involving parents and targeting young children (0-6-year-olds). The Web of Science, PubMed, PsycInfo, CINAHL, and ERIC databases were searched for childhood obesity prevention and intervention programs involving parents. Data were analyzed using the Comprehensive Meta-analysis (CMA) software. Fifty studies with effect sizes measured at short-term follow-up (within 3 months from the end of the intervention) and 26 studies with effect sizes measured at long-term follow-up (all reported in a total of 49 publications) were identified. The combined effect size of interventions was small but significant at short-term follow-up (d = .08, p < .01). The results suggested the presence of a potential publication bias in studies providing results at long-term follow-up, with a nonsignificant adjusted effect size (d = .02), which indicated that obesity interventions were not effective at long-term follow-up. Multivariate meta-regression analyses showed that interventions were more effective when including either interactive sessions or educational materials as opposed to those including both interactive sessions and noninteractive educational materials. No other moderators regarding sample characteristics, study design, or methodological quality were significant. Interventions targeting young children that require parental involvement are effective at short-term follow-up, specifically when interventions include one mode of

Service Users' Involvement and Engagement in Interprofessional Care.

PubMed

Kaini, B K

2016-01-01

Interprofessional care is joint working between health care professionals by pooling their skills, knowledge and expertise, to make joint decisions and learn from each other for the benefits of service users and healthcare professionals. Service users involvement is considered as one of the important aspects of planning, management and decision making process in the delivery of health care to service users. Service users' involvement is not the same as public involvement and partnership arrangements in health care. The active involvement and engagement of service users in health care positively contributes to improve quality of care, to promote better health and to shape the future of health services. Service users are always at the centre of health care professionals' values, work ethics and roles. Moreover, service users centred interprofessional team collaboration is very important to deliver effective health services.

Literacy Programs with Parent Involvement

ERIC Educational Resources Information Center

Montgomery, Joel R.

2008-01-01

The purpose of this working paper is to review current literature on literacy programs for parents of English language learners (ELLs). The paper includes a summary of five literacy programs for ELL parents throughout the United States of America. Four of these were system-wide interventions affecting more than one school or classroom. Each…

Airborne and Maritime/Fixed Station Joint Tactical Radio System (AMF JTRS)

DTIC Science & Technology

2015-12-01

Selected Acquisition Report (SAR) RCS: DD-A&T(Q&A)823-421 Airborne & Maritime/Fixed Station Joint Tactical Radio System (AMF JTRS) As of FY 2017...Information Program Name Airborne & Maritime/Fixed Station Joint Tactical Radio System (AMF JTRS) DoD Component Army Responsible Office References SAR...UNCLASSIFIED 5 Mission and Description Airborne & Maritime/Fixed Station Joint Tactical Radio System (AMF JTRS) products are software programmable

Isokinetic Identification of Knee Joint Torques before and after Anterior Cruciate Ligament Reconstruction

PubMed Central

Czaplicki, Adam; Jarocka, Marta; Walawski, Jacek

2015-01-01

The aim of this study was to evaluate the serial change of isokinetic muscle strength of the knees before and after anterior cruciate ligament reconstruction (ACLR) in physically active males and to estimate the time of return to full physical fitness. Extension and flexion torques were measured for the injured and healthy limbs at two angular velocities approximately 1.5 months before the surgery and 3, 6, and 12 months after ACLR. Significant differences (p ≤ 0.05) in peak knee extension and flexion torques, hamstring/quadriceps (H/Q) strength ratios, uninvolved/involved limb peak torque ratios, and the normalized work of these muscles between the four stages of rehabilitation were identified. Significant differences between extension peak torques for the injured and healthy limbs were also detected at all stages. The obtained results showed that 12 months of rehabilitation were insufficient for the involved knee joint to recover its strength to the level of strength of the uninvolved knee joint. The results helped to evaluate the progress of the rehabilitation and to implement necessary modifications optimizing the rehabilitation training program. The results of the study may also be used as referential data for physically active males of similar age. PMID:26646385

A hybrid computer program for rapidly solving flowing or static chemical kinetic problems involving many chemical species

NASA Technical Reports Server (NTRS)

Mclain, A. G.; Rao, C. S. R.

1976-01-01

A hybrid chemical kinetic computer program was assembled which provides a rapid solution to problems involving flowing or static, chemically reacting, gas mixtures. The computer program uses existing subroutines for problem setup, initialization, and preliminary calculations and incorporates a stiff ordinary differential equation solution technique. A number of check cases were recomputed with the hybrid program and the results were almost identical to those previously obtained. The computational time saving was demonstrated with a propane-oxygen-argon shock tube combustion problem involving 31 chemical species and 64 reactions. Information is presented to enable potential users to prepare an input data deck for the calculation of a problem.

Transcriptome assembly and candidate genes involved in nutritional programming in the swordtail fish Xiphophorus multilineatus.

PubMed

Lu, Yuan; Klimovich, Charlotte M; Robeson, Kalen Z; Boswell, William; Ríos-Cardenas, Oscar; Walter, Ronald B; Morris, Molly R

2017-01-01

Nutritional programming takes place in early development. Variation in the quality and/or quantity of nutrients in early development can influence long-term health and viability. However, little is known about the mechanisms of nutritional programming. The live-bearing fish Xiphophorus multilineatus has the potential to be a new model for understanding these mechanisms, given prior evidence of nutritional programming influencing behavior and juvenile growth rate. We tested the hypotheses that nutritional programming would influence behaviors involved in energy homeostasis as well gene expression in X. multilineatus. We first examined the influence of both juvenile environment (varied in nutrition and density) and adult environment (varied in nutrition) on behaviors involved in energy acquisition and energy expenditure in adult male X. multilineatus . We also compared the behavioral responses across the genetically influenced size classes of males. Males stop growing at sexual maturity, and the size classes of can be identified based on phenotypes (adult size and pigment patterns). To study the molecular signatures of nutritional programming, we assembled a de novo transcriptome for X. multilineatus using RNA from brain, liver, skin, testis and gonad tissues, and used RNA-Seq to profile gene expression in the brains of males reared in low quality (reduced food, increased density) and high quality (increased food, decreased density) juvenile environments. We found that both the juvenile and adult environments influenced the energy intake behavior, while only the adult environment influenced energy expenditure. In addition, there were significant interactions between the genetically influenced size classes and the environments that influenced energy intake and energy expenditure, with males from one of the four size classes (Y-II) responding in the opposite direction as compared to the other males examined. When we compared the brains of males of the Y-II size class

An Investigation of Joint Service Acquisition Logistics Issues/Problems and Automated Joint Program Support.

DTIC Science & Technology

1984-09-01

Management Information System (ALMIS) to address them. Literature was surveyed and problems were summarized and developed into a questionnaire. Structured interviews were then conducted with over 100 different Air Force and civilian upper and middle JSAP managers. Many general and specific problems and issues were identified and validated using statistical and qualitative methods. General use of ALMIS to address certain joint service problem areas was confirmed. Potential use and desirable capabilities for ALMIS were also determined. Recommendations for ALMIS

Parent Involvement Handbook.

ERIC Educational Resources Information Center

Caplan, Arna

This handbook on parent involvement, designed to be used with preschool programs, was developed by the Jefferson County Public Schools in Lakewood, Colorado. Included are: (1) a general statement about parent involvement in an early childhood program, (2) a description of the Jefferson County Early Childhood Program, (3) a description of the…

Defense Acquisitions: Assessments of Selected Weapon Programs

DTIC Science & Technology

2016-03-01

Increment 3 81 Indirect Fire Protection Capability Increment 2-Intercept Block 1 (IFPC Inc 2-I Block 1) 83 Improved Turbine Engine Program (ITEP...ITEP Improved Turbine Engine Program JAGM Joint Air-to-Ground Missile JLTV Joint Light Tactical Vehicle JSTARS Recap Joint Surveillance Target...Attack Radar System Recap 09/2017 —-   Improved Turbine Engine Program 06/2018 O O O Amphibious Ship Replacement 09/2018 O O Advanced Pilot

Joint environmental assessment 1997--2001 of the California Department of Food and Agriculture Curly Top Virus Control Program for Bureau of Land Management and Department of Energy

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

1997-03-01

The DOE, Naval Petroleum reserves in California (NPRC), proposes to sign an Amendment to the Cooperative Agreement and Supplement with the California Department of Food and Agriculture (CDFA) to extend the term of the Curly Top Virus Control Program (CTVCP) in California. This program involves Malathion spraying on NPRC lands to control the beet leafhopper, over a five year period from 1997 through 2001. It is expected that approximately 330 acres on Naval Petroleum Reserve Number 1 (NPR-1) and approximately 9,603 acres on Naval Petroleum Reserve Number 2 (NPR-2) will be treated with Malathion annually by CDFA during the coursemore » of this program. The actual acreage subject to treatment can vary from year to year. Pursuant to the requirements of the National Environmental Policy Act of 1969 (NEPA), as amended, the potential impacts of the proposed action were analyzed in a Joint Environmental Assessment (DOE/EA-1011) with the US Department of Interior, Bureau of Land Management (BLM) acting as lead agency, in consultation with the CDFA, and the DOE acting as a cooperating agency. Based on the analysis in the EA, DOE has determined that the conduct of the Curly Top Virus Control Program in California is not a major Federal action significantly affecting the quality of the human environment, within the meaning of the NEPA. Therefore, the preparation of an Environmental Impact Statement is not required and DOE is consequently issuing a FONSI.« less

Spherical Joint Piston and Connecting Rod Developed

NASA Technical Reports Server (NTRS)

1996-01-01

Under an interagency agreement with the Department of Energy, the NASA Lewis Research Center manages a Heavy-Duty Diesel Engine Technology (HDET) research program. The overall program objectives are to reduce fuel consumption through increased engine efficiency, reduce engine exhaust emissions, and provide options for the use of alternative fuels. The program is administered with a balance of research contracts, university research grants, and focused in-house research. The Cummins Engine Company participates in the HDET program under a cost-sharing research contract. Cummins is researching and developing in-cylinder component technologies for heavy-duty diesel engines. An objective of the Cummins research is to develop technologies for a low-emissions, 55-percent thermal efficiency (LE-55) engine. The best current-production engines in this class achieve about 46-percent thermal efficiency. Federal emissions regulations are driving this technology. Regulations for heavy duty diesel engines were tightened in 1994, more demanding emissions regulations are scheduled for 1998, and another step is planned for 2002. The LE-55 engine emissions goal is set at half of the 1998 regulation level and is consistent with plans for 2002 emissions regulations. LE-55 engine design requirements to meet the efficiency target dictate a need to operate at higher peak cylinder pressures. A key technology being developed and evaluated under the Cummins Engine Company LE-55 engine concept is the spherical joint piston and connecting rod. Unlike conventional piston and connecting rod arrangements which are joined by a pin forming a hinged joint, the spherical joint piston and connecting rod use a ball-and-socket joint. The ball-and-socket arrangement enables the piston to have an axisymmetric design allowing rotation within the cylinder. The potential benefits of piston symmetry and rotation are reduced scuffing, improved piston ring sealing, improved lubrication, mechanical and thermal

[A primary application and evaluation of temporomandibular joint replacement with stock prosthesis].

PubMed

Zhang, Xiao-hu; Chen, Min-jie; Qiu, Ya-ting; Yang, Chi

2012-06-01

To evaluate the effect of total joint replacement in treatment of temporomandibular joint(TMJ) osteoarthropathy with stock prostheses. Six female patients involving 10 joints (2 unilateral and 4 bilateral), with an average age of 59 years old, were involved in this study. Three patients (5 joints) were diagnosed as internal derangement in V stage depending on MRI, 3D-CT findings and clinical characteristics. The other 3 patients (5 joints) had histories of failed temporomandibular joint operation using costochondral graft or temporalis fascial flap. The maximal mouth opening was 1.9 cm on average (range, 1.0 to 2.9cm). All the joints were replaced with Biomet standard prosthesis under general anesthesia. The follow-up period was from 7 to 49 months (average, 17.5 months). All the operations were successfully performed. Heterotopic ossification happened in a bilateral case 1 year postoperatively. One patient with bilateral joint disease complained of severe uncomfortable feeling in the region of the ears and the temples, although there was no significant positive signs according to an ENT examination. Pain relief of the joint and mouth opening improvement were significant in 4 patients. No failure was noted secondary to infection or loosening of the prostheses. The occlusal relationship kept stable postoperatively in all cases. Total TMJ joint replacement with standard prosthesis is a good choice for TMJ reconstruction. It can significantly reduce joint pain and the mouth opening limitation resulted from osteoarthritis. Long-term result remains to be evaluated based on a long-term follow-up.

[Minimally invasive approaches to hip and knee joints for total joint replacement].

PubMed

Rittmeister, M; König, D P; Eysel, P; Kerschbaumer, F

2004-11-01

The manuscript features the different minimally invasive approaches to the hip for joint replacement. These include medial, anterior, anterolateral, and posterior approaches. The concept of minimally invasive hip arthroplasty makes sense if it is an integral part of a larger concept to lower postoperative morbidity. Besides minimal soft tissue trauma, this concept involves preoperative patient education, preemptive analgesia, and postoperative physiotherapy. It is our belief that minimal incision techniques for the hip are not suited for all patients and all surgeons. The different minimally invasive approaches to the knee joint for implantation of a knee arthroplasty are described and discussed. There have been no studies published yet that fulfill EBM criteria. The data so far show that minimally invasive approaches and implantation techniques for total knee replacements lead to quicker rehabilitation of patients.

NOAA's Joint Polar Satellite System's (JPSS) Proving Ground and Risk Reduction (PGRR) Program - Bringing JPSS Science into Support of Key NOAA Missions!

NASA Astrophysics Data System (ADS)

Sjoberg, W.; McWilliams, G.

2017-12-01

This presentation will focus on the continuity of the NOAA Joint Polar Satellite System (JPSS) Program's Proving Ground and Risk Reduction (PGRR) and key activities of the PGRR Initiatives. The PGRR Program was established in 2012, following the launch of the Suomi National Polar Partnership (SNPP) satellite. The JPSS Program Office has used two PGRR Project Proposals to establish an effective approach to managing its science and algorithm teams in order to focus on key NOAA missions. The presenter will provide details of the Initiatives and the processes used by the initiatives that have proven so successful. Details of the new 2017 PGRR Call-for-Proposals and the status of project selections will be discussed.

Design/Analysis of the JWST ISIM Bonded Joints for Survivability at Cryogenic Temperatures

NASA Technical Reports Server (NTRS)

Bartoszyk, Andrew; Johnston, John; Kaprielian, Charles; Kuhn, Jonathan; Kunt, Cengiz; Rodini,Benjamin; Young, Daniel

1990-01-01

A major design and analysis challenge for the JWST ISIM structure is thermal survivability of metal/composite bonded joints below the cryogenic temperature of 30K (-405 F). Current bonded joint concepts include internal invar plug fittings, external saddle titanium/invar fittings and composite gusset/clip joints all bonded to M55J/954-6 and T300/954-6 hybrid composite tubes (75mm square). Analytical experience and design work done on metal/composite bonded joints at temperatures below that of liquid nitrogen are limited and important analysis tools, material properties, and failure criteria for composites at cryogenic temperatures are sparse in the literature. Increasing this challenge is the difficulty in testing for these required tools and properties at cryogenic temperatures. To gain confidence in analyzing and designing the ISIM joints, a comprehensive joint development test program has been planned and is currently running. The test program is designed to produce required analytical tools and develop a composite failure criterion for bonded joint strengths at cryogenic temperatures. Finite element analysis is used to design simple test coupons that simulate anticipated stress states in the flight joints; subsequently the test results are used to correlate the analysis technique for the final design of the bonded joints. In this work, we present an overview of the analysis and test methodology, current results, and working joint designs based on developed techniques and properties.

Joint Services Electronics Program

DTIC Science & Technology

1992-03-05

Packaging Considerations M. T. Raghunath (Professor Abhiram Ranade) A central issue in massively parallel computation is the design of the interconnection...programs on promising network architectures. Publications: [1] M. T. Raghunath and A. G. Ranade, A Simulation-Based Compari- son of Interconnection Networks...more difficult analog function approximation task. Network Design Issues for Fast Global Communication Professor A. Ranade with M.T. Raghunath A

Pain from intra-articular NGF or joint injury in the rat requires contributions from peptidergic joint afferents.

PubMed

Kras, Jeffrey V; Weisshaar, Christine L; Pall, Parul S; Winkelstein, Beth A

2015-09-14

Non-physiological stretch of the cervical facet joint's capsular ligament induces persistent behavioral hypersensitivity and spinal neuronal hyperexcitability via an intra-articular NGF-dependent mechanism. Although that ligament is innervated by nociceptors, it is unknown if a subpopulation is exclusively responsible for the behavioral and spinal neuronal responses to intra-articular NGF and/or facet joint injury. This study ablated joint afferents using the neurotoxin saporin targeted to neurons involved in either peptidergic ([Sar(9),Met (O2)(11)]-substance P-saporin (SSP-Sap)) or non-peptidergic (isolectin B4-saporin (IB4-Sap)) signaling to investigate the contributions of those neuronal populations to facet-mediated pain. SSP-Sap, but not IB4-Sap, injected into the bilateral C6/C7 facet joints 14 days prior to an intra- articular NGF injection prevents NGF-induced mechanical and thermal hypersensitivity in the forepaws. Similarly, only SSP- Sap prevents the increase in mechanical forepaw stimulation- induced firing of spinal neurons after intra-articular NGF. In addition, intra-articular SSP-Sap prevents both behavioral hypersensitivity and upregulation of NGF in the dorsal root ganglion after a facet joint distraction that normally induces pain. These findings collectively suggest that disruption of peptidergic signaling within the joint may be a potential treatment for facet pain, as well as other painful joint conditions associated with elevated NGF, such as osteoarthritis. Copyright © 2015 Elsevier Ireland Ltd. All rights reserved.

Effects of neuromuscular joint facilitation on bridging exercises with respect to deep muscle changes.

PubMed

Zhou, Bin; Huang, QiuChen; Zheng, Tao; Huo, Ming; Maruyama, Hitoshi

2015-05-01

[Purpose] This study examined the effects of neuromuscular joint facilitation on bridging exercises by assessing the cross-sectional area of the multifidus muscle and thickness of the musculus transversus abdominis. [Subjects] Twelve healthy men. [Methods] Four exercises were evaluated: (a) supine resting, (b) bridging resistance exercise involving posterior pelvic tilting, (c) bridging resistance exercise involving anterior pelvic tilting, and (d) bridging resistance exercise involving neuromuscular joint facilitation. The cross-sectional area of the multifidus muscle and thickness of the musculus transversus abdominis were measured during each exercise. [Results] The cross-sectional area of the multifidus muscle and thickness of the musculus transversus abdominis were significantly greater in the neuromuscular joint facilitation group than the others. [Conclusion] Neuromuscular joint facilitation intervention improves the function of deep muscles such as the multifidus muscle and musculus transversus abdominis. Therefore, it can be recommended for application in clinical treatments such as that for back pain.

Invasive plant species and the Joint Fire Science Program.

Treesearch

Heather E. Erickson; Rachel White

2007-01-01

Invasive nonnative plants may be responsible for serious, long-term ecological impacts, including altering fire behavior and fire regimes. Therefore, knowing how to successfully manage invasive plants and their impacts on natural resources is crucial. We present a summary of research on invasive plants and fire that has been generated through the Joint Fire Science...

The Direct Loan Demonstration Program: An Analysis of the Legislative Process Involving Federal Student Loan Policy.

ERIC Educational Resources Information Center

McCormick, Joe Lew

This study examined major stakeholders' perceptions of their involvement and role in the legislative process surrounding the introduction, deliberation, and ultimate passage of the Direct Loan Demonstration Program (DLDP), a federal pilot student loan program. Data analysis was based on a detailed description of the legislative process surrounding…

The Influence of an Early Childhood Program on Parental Involvement: Perceptions of Former Head Start Parents

ERIC Educational Resources Information Center

Croft, Stacey

2017-01-01

A key component of effective early childhood programs is collaborative relationships between schools, families, and the community (Fiese, Eckert, & Spagnola, 2005). One of these early childhood programs, Head Start, stands out among the others in its efforts to work with children, families, and communities to promote parental involvement. Some…

Impact of 3-D seismic data on the Nigerian National Petroleum Corporation/Chevron Nigeria Limited joint venture development drilling program

DOE Office of Scientific and Technical Information (OSTI.GOV)

Quam, S.

The Nigerian National Petroleum Corporation/Chevron Nigeria Limited joint venture has been acquiring three-dimensional (3-D) seismic data over its concessions since 1984. To date, 1700 km[sup 2] have been recorded and processed at a cumulative cost of US $39 million. During 1991 - 1992, 20 development wells were drilled based directly on new 3-D seismic interpretations. These wells have added 148 million bbl of oil in new recoverable reserves, and to date have added 37,000 bbl/day to the joint venture's production. In addition, the 3-D interpretations have resulted in a sizable inventory of wells for future development drilling. The new 3-Dmore » interpretations provided more accurate pictures of fault patterns, fluid contacts, channel trends, stratigraphic continuity, and velocity/amplitude anomalies. In addition, the 3-D data were invaluable in designing low risk, directional well trajectories to tap relatively thin oil legs under large gas caps. Wells often were programmed to hit several objectives at their respective gas/oil contacts, resulting in maximized net oil sand pays and reducing the risk of gas production. In order to do this, directional [open quotes]sharpshooting,[close quotes] accurate depth conversion of the seismic time maps, was critical. By using the 3-D seismic, checkshot, and sonic data to develop a variable velocity space, well-top prognoses within 50 ft at depths of 6,000-10,000 ft were possible, and were key to the success of the program. As the joint venture acreage becomes more mature, development wells will be drilled for smaller numbers of stacked objectives, and sometimes for single sands. Highly accurate 3-D interpretations and depth conversions will become even more critical in order to tap thinner pay zones in a cost-effect manner.« less

The multilingual videotape project: community involvement in a unique health education program.

PubMed Central

Clabots, R B; Dolphin, D

1992-01-01

The large number of Southeast Asian, Hispanic, and Portuguese immigrants in Rhode Island face formidable language and cultural barriers in gaining access to the health care that they need. As the funding for refugee-specific programs diminishes, the focus is on programs that encourage self-sufficiency, assist in gaining access to mainstream health care, and involve a collaboration among service agencies and the communities they serve. On behalf of a coalition of health care and community agencies, Women and Infants Hospital of Rhode Island received a private foundation grant to produce nine multilingual videotapes that would educate immigrants and refugees about health issues specific to them and help them access the health care system. The project was structured to maximize the involvement of the various communities and to "empower" community members in working with mainstream service agencies. Coalition and other community members provided input into topic selection, script content, and presentation methods for the videotapes that would be culturally appropriate. During the 2-year project, nine videotapes were produced with narration in seven languages. Copies of the videotapes were distributed free of charge to coalition members. PMID:1738812

PAIN FROM INTRA-ARTICULAR NGF OR JOINT INJURY IN THE RAT REQUIRES CONTRIBUTIONS FROM PEPTIDERGIC JOINT AFFERENTS

PubMed Central

Kras, Jeffrey V.; Weisshaar, Christine L.; Pall, Parul S.; Winkelstein, Beth A.

2015-01-01

Non-physiological stretch of the cervical facet joint’s capsular ligament induces persistent behavioral hypersensitivity and spinal neuronal hyperexcitability via an intra-articular NGF-dependent mechanism. Although that ligament is innervated by nociceptors, it is unknown if a subpopulation is exclusively responsible for the behavioral and spinal neuronal responses to intra-articular NGF and/or facet joint injury. This study ablated joint afferents using the neurotoxin saporin targeted to neurons involved in either peptidergic ([Sar9,Met(O2)11]-substance P-saporin (SSP-Sap)) or non-peptidergic (isolectin B4-saporin (IB4-Sap)) signaling to investigate the contributions of those neuronal populations to facet-mediated pain. SSP-Sap, but not IB4-Sap, injected into the bilateral C6/C7 facet joints 14 days prior to an intra-articular NGF injection prevents NGF-induced mechanical and thermal hypersensitivity in the forepaws. Similarly, only SSP-Sap prevents the increase in mechanical forepaw stimulation-induced firing of spinal neurons after intra-articular NGF. In addition, intra-articular SSP-Sap prevents both behavioral hypersensitivity and upregulation of NGF in the dorsal root ganglion after a facet joint distraction that normally induces pain. These findings collectively suggest that disruption of peptidergic signaling within the joint may be a potential treatment for facet pain, as well as other painful joint conditions associated with elevated NGF, such as osteoarthritis. PMID:26240991

A Phenomenological Exploration of Mandatory Parental or Guardian Involvement with an At-Risk Student Intervention Program

ERIC Educational Resources Information Center

Mason, Julia Christina

2010-01-01

The purpose of the qualitative phenomenological study was to explore the perception of parent or guardian involvement from a constructivist viewpoint during intervention programs located in Hampton 2 and Pickens counties. The current study involved 15 interviews via three sets of participants, six parents, five teachers and four administrators.…

Should Family and Friends Be Involved in Group-Based Rehabilitation Programs for Adults with Low Vision?

ERIC Educational Resources Information Center

Rees, G.; Saw, C.; Larizza, M.; Lamoureux, E.; Keeffe, J.

2007-01-01

This qualitative study investigates the views of clients with low vision and vision rehabilitation professionals on the involvement of family and friends in group-based rehabilitation programs. Both groups outlined advantages and disadvantages to involving significant others, and it is essential that clients are given the choice. Future work is…

Improving joint pain and function in osteoarthritis.

PubMed

Owens, Claire; Conaghan, Philip G

2016-12-01

Osteoarthritis has become a major chronic pain condition. It affects more than 10% of adults and accounts for almost 10% of health service resources. The impact of osteoarthritis is amplified by underuse of effective muscle strengthening exercises and a focus on often less effective and poorly tolerated analgesic therapies. Although traditionally considered to be primarily a disease of cartilage, there is now ample evidence that typical clinical osteoarthritis involves multiple tissue pathologies. Increased BMI is associated with a higher incidence of knee osteoarthritis. Anatomical abnormalities such as valgus alignment or previous joint trauma including meniscectomy, anterior cruciate ligament rupture and fracture through the joint are also associated with increased incidence of osteoarthritis. Pain is the main presenting symptom. However, we still have a poor understanding of the causes of pain in osteoarthritis. In patients aged 45 or over the diagnosis should be made clinically without investigations if the patient has activity-related joint pain in addition to early morning joint stiffness lasting less than 30 minutes. Muscle strengthening and aerobic exercise have been shown to improve joint pain and function. Weight loss not only improves joint pain and function but has a myriad of other health benefits, reducing the incidence of lifestyle associated diseases such as cardiovascular disease and type 2 diabetes, and mechanical stress on the joints.

What It Takes. Air Force Command of Joint Operations

DTIC Science & Technology

2009-01-01

Iraq Assistance Group IDE intermediate developmental education IO international organization ISAF International Security and Assistance Force ISR...Operations Table A.1—Continued Joint Task Force Mission/Operation Start End Service Command Rank JTF–Joint Area Support Group (JASG) Iraqi Freedom...be of interest to a wide group of Air Force personnel involved in the development and func- tion of the service’s command organizations, including

BE EMPOWERED, a specialty pharmacy education program for hemophilia B patients, impacts adult joint bleeds and pediatric use of RICE.

PubMed

Blankenship, Crystal S; Tortella, Bartholomew J; Bruno, Marianna

2014-02-01

Traditional education about hemophilia B in hemophilia treatment centers (HTCs) and episodic contact with HTCs limit the amount of education patients and their caregivers receive. Specialty care providers have frequent, continuing contact with patients. Each contact with a specialty care provider (e.g., coordinating a refill or addressing a patient inquiry) is another opportunity to support patient self-management of the disease and to give counsel on appropriate medication administration. The role of specialty pharmacy in improving patient self-management and supporting medication management and adherence is well established and reported with rheumatoid arthritis, multiple sclerosis, and renal transplant. With hemophilia, specialty pharmacies can support educational reinforcement of HTCs as well as support patient self-management and education of medication therapy. Utilization of patient education materials and programs can facilitate such a role. BE EMPOWERED, a specialty pharmacy education program for hemophilia B patients, is a multimodule education program coupled with frequent telephonic outreach.   To provide education about hemophilia B, based upon discrete curriculum modules, facilitated by a specialty pharmacy-based nurse educator.   Patients with hemophilia B (or, for children, their caregivers) were enrolled in the BE EMPOWERED program, and data were prospectively collected regarding bleeding and hemophilia-specific quality of life (QoL) outcomes (n = 21 caregivers, n = 17 adults).  BE EMPOWERED was associated with a statistically significant impact on the use of RICE (rest, ice, compression, and elevation) by caregivers whose utilization increased from 81% to 95% (P = 0.05). Adults in the BE EMPOWERED program experienced a statistically significant drop in the annualized bleeding rate (ABR), decreasing from 4.7 to 2.5 for total bleeds and decreasing from 3.5 to 1.7 for joint bleeds (P ≤ 0.02). For children with hemophilia B

Religious Factors Associated with Alcohol Involvement: Results from the Mauritian Joint Child Health Project

PubMed Central

Luczak, Susan E.; Prescott, Carol A.; Dalais, Cyril; Raine, Adrian; Venables, Peter H.; Mednick, Sarnoff A.

2014-01-01

Background The purpose of this study was to examine religious factors associated with alcohol involvement in Mauritius. The three main religions on the island, Hinduism, Catholicism, and Islam, promote different views of the appropriate use of alcohol. Based on reference group theory, we hypothesized that both the content of a religion’s alcohol norms and an individual’s religious commitment would relate to alcohol use behavior. Methods Participants were from the Joint Child Health Project, a longitudinal study that has followed a birth cohort of 1,795 individuals since 1972 when they were 3 years old. All available participants (67%; 55% male) were assessed in mid-adulthood on religious variables, lifetime drinking, and lifetime alcohol use disorders. Results Across religions, individuals who viewed their religion as promoting abstinence were less likely to be drinkers. Religious commitment was associated with reduced probability of drinking only in those who viewed their religion as promoting abstinence. Among drinkers, abstention norms and religious commitment were not associated with lower likelihood of alcohol use disorders. In Catholics who viewed their religion as promoting abstinence and still were drinkers, high religious commitment was associated with increased risk for alcohol use disorders. Conclusions Predictions based on reference group theory were largely supported, with religious norms and commitment differentially related to alcohol use and problems both across religions and among individuals within religions. Findings highlight the importance of examining multiple aspects of religion to better understand the relationship of religion with alcohol behaviors. PMID:24332801

From design to implementation - The Joint Asia Diabetes Evaluation (JADE) program: A descriptive report of an electronic web-based diabetes management program

PubMed Central

2010-01-01

Background The Joint Asia Diabetes Evaluation (JADE) Program is a web-based program incorporating a comprehensive risk engine, care protocols, and clinical decision support to improve ambulatory diabetes care. Methods The JADE Program uses information technology to facilitate healthcare professionals to create a diabetes registry and to deliver an evidence-based care and education protocol tailored to patients' risk profiles. With written informed consent from participating patients and care providers, all data are anonymized and stored in a databank to establish an Asian Diabetes Database for research and publication purpose. Results The JADE electronic portal (e-portal: http://www.jade-adf.org) is implemented as a Java application using the Apache web server, the mySQL database and the Cocoon framework. The JADE e-portal comprises a risk engine which predicts 5-year probability of major clinical events based on parameters collected during an annual comprehensive assessment. Based on this risk stratification, the JADE e-portal recommends a care protocol tailored to these risk levels with decision support triggered by various risk factors. Apart from establishing a registry for quality assurance and data tracking, the JADE e-portal also displays trends of risk factor control at each visit to promote doctor-patient dialogues and to empower both parties to make informed decisions. Conclusions The JADE Program is a prototype using information technology to facilitate implementation of a comprehensive care model, as recommended by the International Diabetes Federation. It also enables health care teams to record, manage, track and analyze the clinical course and outcomes of people with diabetes. PMID:20465815

From design to implementation--the Joint Asia Diabetes Evaluation (JADE) program: a descriptive report of an electronic web-based diabetes management program.

PubMed

Ko, Gary T; So, Wing-Yee; Tong, Peter C; Le Coguiec, Francois; Kerr, Debborah; Lyubomirsky, Greg; Tamesis, Beaver; Wolthers, Troels; Nan, Jennifer; Chan, Juliana

2010-05-13

The Joint Asia Diabetes Evaluation (JADE) Program is a web-based program incorporating a comprehensive risk engine, care protocols, and clinical decision support to improve ambulatory diabetes care. The JADE Program uses information technology to facilitate healthcare professionals to create a diabetes registry and to deliver an evidence-based care and education protocol tailored to patients' risk profiles. With written informed consent from participating patients and care providers, all data are anonymized and stored in a databank to establish an Asian Diabetes Database for research and publication purpose. The JADE electronic portal (e-portal: http://www.jade-adf.org) is implemented as a Java application using the Apache web server, the mySQL database and the Cocoon framework. The JADE e-portal comprises a risk engine which predicts 5-year probability of major clinical events based on parameters collected during an annual comprehensive assessment. Based on this risk stratification, the JADE e-portal recommends a care protocol tailored to these risk levels with decision support triggered by various risk factors. Apart from establishing a registry for quality assurance and data tracking, the JADE e-portal also displays trends of risk factor control at each visit to promote doctor-patient dialogues and to empower both parties to make informed decisions. The JADE Program is a prototype using information technology to facilitate implementation of a comprehensive care model, as recommended by the International Diabetes Federation. It also enables health care teams to record, manage, track and analyze the clinical course and outcomes of people with diabetes.

The effect of instability training on knee joint proprioception and core strength.

PubMed

Cuğ, Mutlu; Ak, Emre; Ozdemir, Recep Ali; Korkusuz, Feza; Behm, David G

2012-01-01

Although there are many studies demonstrating increased trunk activation under unstable conditions, it is not known whether this increased activation would translate into meaningful trunk strength with a prolonged training program. Additionally, while balance-training programs have been shown to improve stability, their effect on specific joint proprioception is not clear. Thus the objective of this study was to examine training adaptations associated with a 10-week instability-training program. Participants were tested pre- and post-training for trunk extension and flexion strength and knee proprioception. Forty-three participants participated in either a 10-week (3 days per week) instability-training program using Swiss balls and body weight as resistance or a control group (n = 17). The trained group increased (p < 0. 05) trunk extension peak torque/body weight (23.6%) and total work output (20.1%) from pre- to post-training while the control group decreased by 6.8% and 6.7% respectively. The exercise group increased their trunk flexion peak torque/body weight ratios by 18.1% while the control group decreased by 0.4%. Knee proprioception (combined right and left joint repositioning) improved 44.7% from pre- to post-training (p = 0.0006) and persisted (21.5%) for 9 months post-training. In addition there was a side interaction with the position sense of the right knee at 9 months showing 32.1% (p = 0.03) less deviation from the reference angle than the right knee during pre-testing. An instability-training program using Swiss balls with body weight as resistance can provide prolonged improvements in joint proprioception and core strength in previously untrained individuals performing this novel training stress which would contribute to general health. Key pointsAlthough traditional free weight resistance exercises have been recommended as most beneficial for improving strength and power in athletes (Behm et al., 2010b), an IT program using Swiss balls and body

The Effect of Instability Training on Knee Joint Proprioception and Core Strength

PubMed Central

Cuğ, Mutlu; Ak, Emre; Özdemir, Recep Ali; Korkusuz, Feza; Behm, David G

2012-01-01

Although there are many studies demonstrating increased trunk activation under unstable conditions, it is not known whether this increased activation would translate into meaningful trunk strength with a prolonged training program. Additionally, while balance-training programs have been shown to improve stability, their effect on specific joint proprioception is not clear. Thus the objective of this study was to examine training adaptations associated with a 10-week instability-training program. Participants were tested pre- and post-training for trunk extension and flexion strength and knee proprioception. Forty-three participants participated in either a 10-week (3 days per week) instability-training program using Swiss balls and body weight as resistance or a control group (n = 17). The trained group increased (p < 0. 05) trunk extension peak torque/body weight (23.6%) and total work output (20.1%) from pre- to post-training while the control group decreased by 6.8% and 6.7% respectively. The exercise group increased their trunk flexion peak torque/body weight ratios by 18.1% while the control group decreased by 0.4%. Knee proprioception (combined right and left joint repositioning) improved 44.7% from pre- to post-training (p = 0.0006) and persisted (21.5%) for 9 months post-training. In addition there was a side interaction with the position sense of the right knee at 9 months showing 32.1% (p = 0.03) less deviation from the reference angle than the right knee during pre-testing. An instability-training program using Swiss balls with body weight as resistance can provide prolonged improvements in joint proprioception and core strength in previously untrained individuals performing this novel training stress which would contribute to general health. Key pointsAlthough traditional free weight resistance exercises have been recommended as most beneficial for improving strength and power in athletes (Behm et al., 2010b), an IT program using Swiss balls and body

Design/analysis of the JWST ISIM bonded joints for survivability at cryogenic temperatures

NASA Astrophysics Data System (ADS)

Bartoszyk, Andrew; Johnston, John; Kaprielian, Charles; Kuhn, Jonathan; Kunt, Cengiz; Rodini, Benjamin; Young, Daniel

2005-08-01

A major design and analysis challenge for the JWST ISIM structure is thermal survivability of metal/composite adhesively bonded joints at the cryogenic temperature of 30K (-405°F). Current bonded joint concepts include internal invar plug fittings, external saddle titanium/invar fittings and composite gusset/clip joints all bonded to hybrid composite tubes (75mm square) made with M55J/954-6 and T300/954-6 prepregs. Analytical experience and design work done on metal/composite bonded joints at temperatures below that of liquid nitrogen are limited and important analysis tools, material properties, and failure criteria for composites at cryogenic temperatures are sparse in the literature. Increasing this challenge is the difficulty in testing for these required tools and properties at cryogenic temperatures. To gain confidence in analyzing and designing the ISIM joints, a comprehensive joint development test program has been planned and is currently running. The test program is designed to produce required analytical tools and develop a composite failure criterion for bonded joint strengths at cryogenic temperatures. Finite element analysis is used to design simple test coupons that simulate anticipated stress states in the flight joints; subsequently, the test results are used to correlate the analysis technique for the final design of the bonded joints. In this work, we present an overview of the analysis and test methodology, current results, and working joint designs based on developed techniques and properties.

Space Suit Joint Torque Measurement Method Validation

NASA Technical Reports Server (NTRS)

Valish, Dana; Eversley, Karina

2012-01-01

In 2009 and early 2010, a test method was developed and performed to quantify the torque required to manipulate joints in several existing operational and prototype space suits. This was done in an effort to develop joint torque requirements appropriate for a new Constellation Program space suit system. The same test method was levied on the Constellation space suit contractors to verify that their suit design met the requirements. However, because the original test was set up and conducted by a single test operator there was some question as to whether this method was repeatable enough to be considered a standard verification method for Constellation or other future development programs. In order to validate the method itself, a representative subset of the previous test was repeated, using the same information that would be available to space suit contractors, but set up and conducted by someone not familiar with the previous test. The resultant data was compared using graphical and statistical analysis; the results indicated a significant variance in values reported for a subset of the re-tested joints. Potential variables that could have affected the data were identified and a third round of testing was conducted in an attempt to eliminate and/or quantify the effects of these variables. The results of the third test effort will be used to determine whether or not the proposed joint torque methodology can be applied to future space suit development contracts.

Hereditary hemochromatosis as a risk factor for joint replacement surgery.

PubMed

Sahinbegovic, Enijad; Dallos, Tomás; Aigner, Elmar; Axmann, Roland; Engelbrecht, Matthias; Schöniger-Hekele, Maximilian; Karonitsch, Thomas; Farkas, Martin; Karger, Thomas; Willeit, Johann; Stölzel, Ulrich; Keysser, Gernot; Datz, Christian; Kiechl, Stefan; Schett, Georg; Zwerina, Jochen

2010-07-01

Hemochromatosis is an inherited disease with iron overload and joint involvement resembling osteoarthritis. To determine the rate of joint replacement surgery in patients with hemochromatosis, we performed a cross-sectional cohort study. A total of 199 individuals with hereditary hemochromatosis were included. The prevalence of joint replacement surgery in hip, knee, and ankle joints because of secondary osteoarthritis was assessed. Data were compared with 917 healthy subjects from the population-based Bruneck study. A total of 32 of 199 individuals with hemochromatosis received joint replacement surgery with a total number of 52 joints replaced. Compared with expected rates in healthy individuals, patients with hemochromatosis had a significantly higher risk for joint replacement surgery (odds ratio 9.0; confidence interval, 4.6-17.4). Joint replacement occurred significantly earlier in life in patients with hemochromatosis; 21.9% of the patients with hemochromatosis and 1.7% of healthy individuals required joint replacement before the age of 50 years (P=.0027). Moreover, patients with hemochromatosis were more likely to require multiple joint replacements (8.5%) than the control group (expected rate 0.3%; P=.0001). Hemochromatosis is a risk factor for joint replacement surgery because of severe secondary osteoarthritis. Copyright 2010 Elsevier Inc. All rights reserved.

Hybrid FSWeld-bonded joint fatigue behaviour

NASA Astrophysics Data System (ADS)

Lertora, Enrico; Mandolfino, Chiara; Gambaro, Carla; Pizzorni, Marco

2018-05-01

Aluminium alloys, widely used in aeronautics, are increasingly involved in the automotive industry due to the good relationship between mechanical strength and specific weight. The lightening of the structures is the first objective, which allows the decreasing in the weight in motion. The use of aluminium alloys has also seen the introduction of the Friction Stir Welding (FSW) technique for the production of structural overlapping joints. FSW allows us to weld overlap joints free from defects, but with the presence of a structural notch further aggravated by the presence of a "hook" defect near the edge of the weld. Furthermore, FSW presents a weld penetration area connected to the tool geometry and penetration. The experimental activity will be focused on the combination of two different joining techniques, which can synergistically improve the final joint resistance. In particular, the welding and bonding process most commonly known as weld-bonding is defined as a hybrid process, as it combines two different junction processes. In this paper we analyse FSWelded AA6082 aluminium alloy overlapped joint with the aim of quantitatively evaluating the improvement provided by the presence of an epoxy adhesive between the plates. After optimising the weld-bonding process, the mechanical behaviour of welded joints will be analysed by static and dynamic tests. The presence of the adhesive should limit the negative effect of the structural notch inevitable in a FSW overlapped joint.

Adapting an evidence based parenting program for child welfare involved teens and their caregivers

PubMed Central

Barkan, Susan E.; Salazar, Amy M.; Estep, Kara; Mattos, Leah M.; Eichenlaub, Caroline; Haggerty, Kevin P.

2015-01-01

The scarcity of caregivers and the unique vulnerability of teens involved with the child welfare system necessitate effective strategies for ensuring that caregivers are prepared and supported in the important role they play with children and youth within the child welfare system. They are in a position, through the establishment of a strong, positive, supportive connection with the youth, to potentially minimize the impacts of recent trauma and interrupt a negative trajectory by preventing the youth’s initiation of high-risk behavior. In this paper we describe the process used to systematically adapt Staying Connected with Your Teen™, an evidence-based, prevention-focused parenting program found in other studies to reduce the initiation of teens‘ risky behaviors, for use with foster teens and their relative or foster caregivers. This work has been guided by the ADAPT-ITT framework developed by Wingood and DiClemente (2008) for adapting evidence-based interventions. Qualitative work conducted in Phase 1 of this study identified the need for the development of a trusted connection between foster youth and their caregivers, as well as tools for helping them access community resources, social services, and educational supports. This paper describes the process used to develop new and adapted program activities in response to the needs identified in Phase 1. We conducted a theater test with dyads of foster youth and their caregivers to get feedback on the new activities. Findings from the theater test are provided and next steps in the research are discussed which include examining program usability, fidelity, feasibility, and testing this new prevention program that has been tailored for child welfare involved youth and their caregivers. This intervention program has the potential to fill an important gap in the availability of preventive programming for caregivers of teens in foster care. PMID:26052172

Seal Joint Analysis and Design for the Ares-I Upper Stage LOX Tank

NASA Technical Reports Server (NTRS)

Phillips, Dawn R.; Wingate, Robert J.

2011-01-01

The sealing capability of the Ares-I Upper Stage liquid oxygen tank-to-sump joint is assessed by analyzing the deflections of the joint components. Analyses are performed using three-dimensional symmetric wedge finite element models and the ABAQUS commercial finite element software. For the pressure loads and feedline interface loads, the analyses employ a mixed factor of safety approach to comply with the Constellation Program factor of safety requirements. Naflex pressure-assisted seals are considered first because they have been used successfully in similar seal joints in the Space Shuttle External Tank. For the baseline sump seal joint configuration with a Naflex seal, the predicted joint opening greatly exceeds the seal design specification. Three redesign options of the joint that maintain the use of a Naflex seal are studied. The joint openings for the redesigned seal joints show improvement over the baseline configuration; however, these joint openings still exceed the seal design specification. RACO pressure-assisted seals are considered next because they are known to also be used on the Space Shuttle External Tank, and the joint opening allowable is much larger than the specification for the Naflex seals. The finite element models for the RACO seal analyses are created by modifying the models that were used for the Naflex seal analyses. The analyses show that the RACO seal may provide sufficient sealing capability for the sump seal joint. The results provide reasonable data to recommend the design change and plan a testing program to determine the capability of RACO seals in the Ares-I Upper Stage liquid oxygen tank sump seal joint.

Flat H Frangible Joint Evolution

NASA Technical Reports Server (NTRS)

Diegelman, Thomas E.; Hinkel, Todd J.; Benjamin, Andrew; Rochon, Brian V.; Brown, Christopher W.

2016-01-01

Space vehicle staging and separation events require pyrotechnic devices. They are single-use mechanisms that cannot be tested, nor can failure-tolerant performance be demonstrated in actual flight articles prior to flight use. This necessitates the implementation of a robust design and test approach coupled with a fully redundant, failure-tolerant explosive mechanism to ensure that the system functions even in the event of a single failure. Historically, NASA has followed the single failure-tolerant (SFT) design philosophy for all human-rated spacecraft, including the Space Shuttle Program. Following the end of this program, aerospace companies proposed building the next generation human-rated vehicles with off-the-shelf, non-redundant, zero-failure-tolerant (ZFT) separation systems. Currently, spacecraft and launch vehicle providers for both the Orion and Commercial Crew Programs (CCPs) plan to deviate from the heritage safety approach and NASA's SFT human rating requirements. Both programs' partners have base-lined ZFT frangible joints for vehicle staging and fairing separation. These joints are commercially available from pyrotechnic vendors. Non-human-rated missions have flown them numerous times. The joints are relatively easy to integrate structurally within the spacecraft. In addition, the separation event is debris free, and the resultant pyro shock is lower than that of other design solutions. It is, however, a serious deficiency to lack failure tolerance. When used for critical applications on human-rated vehicles, a single failure could potentially lead to loss of crew (LOC) or loss of mission (LOM)). The Engineering and Safety & Mission Assurance directorates within the NASA Johnson Space Center took action to address this safety issue by initiating a project to develop a fully redundant, SFT frangible joint design, known as the Flat H. Critical to the ability to retrofit on launch vehicles being developed, the SFT mechanisms must fit within the same

Clementine, Deep Space Program Science Experiment

NASA Technical Reports Server (NTRS)

1993-01-01

Clementine, also called the Deep Space Program Science Experiment, is a joint Department of Defense (DoD)/National Aeronautics and Space Administration (NASA) mission with the dual goal of testing small spacecraft, subsystems, and sensors in the deep space environment and also providing a nominal science return. The Clementine mission will provide technical demonstrations of innovative lightweight spacecraft components and sensors, will be launced on a spacecraft developed within 2 years of program start, and will point a way for new planetary mission options under consideration by NASA. This booklet gives the background of the Clementine mission (including the agencies involved), the mission objectives, the mission scenario, the instruments that the mission will carry, and how the data will be analyzed and made accessible.

Joint services electronics program

NASA Astrophysics Data System (ADS)

Flynn, George W.; Osgood, Richard M., Jr.

1988-05-01

Several milestones have been reached in GaAs research. The first active GaAs device, a 1 micrometer channel width MESFET, has been made at Columbia. This device is a basic building block in the GaAs CCD program. GaAs surface studies have also born fruit. UV light has been found to oxidize rapidly the surface of GaAs in an UHV environment containing traces of water vapor and O2. The mechanism appears to be related to the generation of hot photocarriers.

Fractal Analysis of Rock Joint Profiles

NASA Astrophysics Data System (ADS)

Audy, Ondřej; Ficker, Tomáš

2017-10-01

Surface reliefs of rock joints are analyzed in geotechnics when shear strength of rocky slopes is estimated. The rock joint profiles actually are self-affine fractal curves and computations of their fractal dimensions require special methods. Many papers devoted to the fractal properties of these profiles were published in the past but only a few of those papers employed a convenient computational method that would have guaranteed a sound value of that dimension. As a consequence, anomalously low dimensions were presented. This contribution deals with two computational modifications that lead to sound fractal dimensions of the self-affine rock joint profiles. These are the modified box-counting method and the modified yard-stick method sometimes called the compass method. Both these methods are frequently applied to self-similar fractal curves but the self-affine profile curves due to their self-affine nature require modified computational procedures implemented in computer programs.

Real Stories, Extraordinary People: Preliminary Findings from an Aboriginal Community-Controlled Cultural Immersion Program for Local Teachers

ERIC Educational Resources Information Center

Burgess, Cathie; Cavanagh, Pat

2012-01-01

This paper reports on effective strategies for developing the cultural competence of teachers involved in Aboriginal education and presents the preliminary findings of a review into the Connecting to Country Program (CTC), a joint venture of the NSW Aboriginal Education Consultative Group (AECG) and the NSW Department of Education and Communities…

Joint Oil Analysis Program Spectrometer Standards SCP Science (Conostan) Qualification Report for D19-0, D3-100, and D12-XXX Series Standards

DTIC Science & Technology

2015-05-20

Joint Oil Analysis Program Spectrometer Standards SCP Science (Conostan) Qualification Report For D19-0, D3-100, and D12- XXX Series Standards NF...Candidate Type D19-0 ICP-AES Results ..................................................................... 4 Table V. Candidate Type D12- XXX ...Physical Property Results .................................................. 5 Table VI. Candidate Type D12- XXX Rotrode-AES Results

[Juvenile rheumatoid diseases: Endoprosthetic care of destroyed hip joints].

PubMed

Rehart, S; Henniger, M

2015-07-01

Patients with juvenile idiopathic arthritis (JIA) often suffer from involvement of the hip joints, with joint destruction and related functional limitations, making hip replacement necessary. To discover what special features are to be expected in patients with JIA and hip arthroplasty and what impact they have on surgical indication, choice of implant, and technique. Selective literature review and evaluation of our patient population. Compared with osteoarthritis patients, JIA patients are on average much younger at the time of hip replacement. Owing to the onset of the disease in childhood or adolescence and the frequent glucocorticoid therapy, growth disorders or abnormal anatomical findings are common in these patients. Bone density is often reduced at an early age. The perioperative management of medication has to be planned. Special implants for patients with rheumatic diseases do not exist, but the above peculiarities of this group of patients should be considered for surgical procedure and choice of implant and material. Overall, the results of hip arthroplasty in juvenile rheumatic diseases, in terms of pain relief and functional improvement, are good. The limited life of the arthroplasty is problematic. By relieving pain, improvement of the range of motion and activity level very high patient satisfaction is usually achieved by hip arthroplasty in JIA patients. In the case of involvement of the contralateral hip or the ipsilateral knee joint it may be useful to perform a simultaneous, single-stage joint replacement of both joints.

Development of design and analysis methodology for composite bolted joints

NASA Astrophysics Data System (ADS)

Grant, Peter; Sawicki, Adam

1991-05-01

This paper summarizes work performed to develop composite joint design methodology for use on rotorcraft primary structure, determine joint characteristics which affect joint bearing and bypass strength, and develop analytical methods for predicting the effects of such characteristics in structural joints. Experimental results have shown that bearing-bypass interaction allowables cannot be defined using a single continuous function due to variance of failure modes for different bearing-bypass ratios. Hole wear effects can be significant at moderate stress levels and should be considered in the development of bearing allowables. A computer program has been developed and has successfully predicted bearing-bypass interaction effects for the (0/+/-45/90) family of laminates using filled hole and unnotched test data.

Joint Cockpit Office: history and role in defense-wide issues regarding avionics displays

NASA Astrophysics Data System (ADS)

O'Connor, John C.; Kraemer, William A.

2000-08-01

The charter of the Joint Cockpit Office (JCO) is to plan, coordinate and accelerate the transition of advanced development cockpit/crew station technologies critical to crew effectiveness in current and future air vehicles. The JCO helps assure a single, coordinated, and highly integrated cockpit/crew station Science and Technology (S&T) program within and between the Air Force, the Army, and the Navy. It serves as the primary interface and focal point for issues involving these technologies for organizations within and external to the Services. The Services are at the advent of fielding new technologies such as helmet-mounted displays as a primary flight reference. They will most certainly evaluate the use of windowless cockpits to counter the laser threat and allow for less constraining aerodynamic conditions in future vehicle design. The transition to multi-spectral displays in future military and commercial aircraft is imminent. The JCO is well positioned to assess and focus the research needed to safely exploit these new technologies and meet customer requirements. Presently, the JCO is undertaking three initiatives: creation of a joint-service, Cooperative Research and Development Agreement (CRDA) with Lockheed Martin to study the thresholds of virtual helmet-mounted display attributes and effects on pilot performance; management of the Spatial Disorientation Countermeasures program, and facilitation of the actions determined by the DoD Executive Agent for Flat Panel Displays.

Dynamic Cytology and Transcriptional Regulation of Rice Lamina Joint Development.

PubMed

Zhou, Li-Juan; Xiao, Lang-Tao; Xue, Hong-Wei

2017-07-01

Rice ( Oryza sativa ) leaf angle is determined by lamina joint and is an important agricultural trait determining leaf erectness and, hence, the photosynthesis efficiency and grain yield. Genetic studies reveal a complex regulatory network of lamina joint development; however, the morphological changes, cytological transitions, and underlying transcriptional programming remain to be elucidated. A systemic morphological and cytological study reveals a dynamic developmental process and suggests a common but distinct regulation of the lamina joint. Successive and sequential cell division and expansion, cell wall thickening, and programmed cell death at the adaxial or abaxial sides form the cytological basis of the lamina joint, and the increased leaf angle results from the asymmetric cell proliferation and elongation. Analysis of the gene expression profiles at four distinct developmental stages ranging from initiation to senescence showed that genes related to cell division and growth, hormone synthesis and signaling, transcription (transcription factors), and protein phosphorylation (protein kinases) exhibit distinct spatiotemporal patterns during lamina joint development. Phytohormones play crucial roles by promoting cell differentiation and growth at early stages or regulating the maturation and senescence at later stages, which is consistent with the quantitative analysis of hormones at different stages. Further comparison with the gene expression profile of leaf inclination1 , a mutant with decreased auxin and increased leaf angle, indicates the coordinated effects of hormones in regulating lamina joint. These results reveal a dynamic cytology of rice lamina joint that is fine-regulated by multiple factors, providing informative clues for illustrating the regulatory mechanisms of leaf angle and plant architecture. © 2017 American Society of Plant Biologists. All Rights Reserved.

Coherence between harvest and habitat management -- Joint venture perspectives

USGS Publications Warehouse

Baxter, C.K.; Nelson, J.W.; Reinecke, K.J.; Stephens, S.E.

2006-01-01

Introduction: In recent months, an ad hoc group of waterfowl scientists, representing the International Association of Fish and Wildlife Agencies (IAFWA) Adaptive Harvest Management (ARM) Task Force and the North American Waterfowl Management Plan (NAWMP) Committee, have collaborated as a Joint Task Group (JTG) to assess options for unifying the population goals guiding waterfowl harvest management and habitat management. The JTG has been charged with bringing coherence to the population goals of the two programs. Characterizing the problem as one of coherence indicates value judgments exist regarding its significance or perhaps existence. For purposes of this paper, we characterize the lack of coherence as the absence of consistent population goals in the two related components of waterfowl conservation habitat and harvest management. Our purpose is to support continued dialogue on the respective goals of these programs and the possible implications of discordant goals to habitat joint ventures. Our objectives are two-fold: (1) illustrate how NAWMP habitat management goals and strategies have been interpreted and pursued in both breeding and wintering areas, and (2) provide perspectives on the linkages between regional habitat management programs and harvest management. The Lower Mississippi Valley and the Prairie Pothole joint ventures (LMVJV and PPJV, respectively) will be used as examples.

The return period analysis of natural disasters with statistical modeling of bivariate joint probability distribution.

PubMed

Li, Ning; Liu, Xueqin; Xie, Wei; Wu, Jidong; Zhang, Peng

2013-01-01

New features of natural disasters have been observed over the last several years. The factors that influence the disasters' formation mechanisms, regularity of occurrence and main characteristics have been revealed to be more complicated and diverse in nature than previously thought. As the uncertainty involved increases, the variables need to be examined further. This article discusses the importance and the shortage of multivariate analysis of natural disasters and presents a method to estimate the joint probability of the return periods and perform a risk analysis. Severe dust storms from 1990 to 2008 in Inner Mongolia were used as a case study to test this new methodology, as they are normal and recurring climatic phenomena on Earth. Based on the 79 investigated events and according to the dust storm definition with bivariate, the joint probability distribution of severe dust storms was established using the observed data of maximum wind speed and duration. The joint return periods of severe dust storms were calculated, and the relevant risk was analyzed according to the joint probability. The copula function is able to simulate severe dust storm disasters accurately. The joint return periods generated are closer to those observed in reality than the univariate return periods and thus have more value in severe dust storm disaster mitigation, strategy making, program design, and improvement of risk management. This research may prove useful in risk-based decision making. The exploration of multivariate analysis methods can also lay the foundation for further applications in natural disaster risk analysis. © 2012 Society for Risk Analysis.

Academic productivity among fellowship associated adult total joint reconstruction surgeons.

PubMed

Khan, Adam Z; Kelley, Benjamin V; Patel, Ankur D; McAllister, David R; Leong, Natalie L

2017-12-01

The Hirsch index (h-index) is a measure that evaluates both research volume and quality-taking into consideration both publications and citations of a single author. No prior work has evaluated academic productivity and contributions to the literature of adult total joint replacement surgeons. This study uses h-index to benchmark the academic impact and identify characteristics associated with productivity of faculty members at joint replacement fellowships. Adult reconstruction fellowship programs were obtained via the American Association of Hip and Knee Surgeons website. Via the San Francisco match and program-specific websites, program characteristics (Accreditation Council for Graduate Medical Education approval, academic affiliation, region, number of fellows, fellow research requirement), associated faculty members, and faculty-specific characteristics (gender, academic title, formal fellowship training, years in practice) were obtained. H-index and total faculty publications served as primary outcome measures. Multivariable linear regression determined statistical significance. Sixty-six adult total joint reconstruction fellowship programs were identified: 30% were Accreditation Council for Graduate Medical Education approved and 73% had an academic affiliation. At these institutions, 375 adult reconstruction surgeons were identified; 98.1% were men and 85.3% had formal arthroplasty fellowship training. Average number of publications per faculty member was 50.1 (standard deviation 76.8; range 0-588); mean h-index was 12.8 (standard deviation 13.8; range 0-67). Number of fellows, faculty academic title, years in practice, and formal fellowship training had a significant ( P < .05) positive correlation with both h-index and total publications. The statistical overview presented in this work can help total joint surgeons quantitatively benchmark their academic performance against that of their peers.

2007 Joint Chemical Biological, Radiological and Nuclear (CBRN) Conference and Exhibition - Combating Weapons of Mass Destruction

DTIC Science & Technology

2007-06-27

Selected CB Defense Systems SHAPESENSE Joint Warning and Reporting Network JSLIST CB Protected Shelter Joint Vaccine Acquisition Program Joint Effects...military can operate in any environment, unconstrained by chemical or biological weapons. 21 SHIELD SUSTAIN Selected CB Defense Systems SHAPESENSE Joint...28070625_JCBRN_Conference_Reeves UNCLASSIFIED Decontamination Vision Strippable Barriers Self-Decontaminating Fabrics/Coatings Reduce Logistics Burden

Report of the Joint Accounting Group.

ERIC Educational Resources Information Center

Western Interstate Commission for Higher Education, Boulder, CO. National Center for Higher Education Management Systems.

The Joint Accounting Group (JAG) has as its primary goal to develop a capability to provide uniform transactional finance data at the institutional level. Such data should effectively meet the needs of public reporting, institutional financial management, and program planning. The group believes that the attainment of this goal requires uniformly…

The Joint Convention - Its Structure, the Articles and its Administration

DOE Office of Scientific and Technical Information (OSTI.GOV)

Metcalf, P.; Louvat, D.

The objective of the Joint Convention on the Safety of Spent Fuel Management and on the Safety of Radioactive Waste Management (The Joint Convention) is to achieve a high level of safety worldwide in the management of spent nuclear and fuel and radioactive waste. [1] It is an incentive convention designed to encourage and assist countries to achieve the objective. Contracting Parties to the Joint Convention are required to compile and submit a national report on how they meet the articles of the Joint Convention. The reports are peer reviewed by other Contracting Parties to the Joint Convention and thenmore » countries have to defend the report at a review meeting of all the Contracting Parties. The process entails both a self appraisal in compiling the report and independent international peer review. Summaries are compiled of the various reviews and these are presented in plenary, with a view to identifying generic issues and areas in which countries are improving safety or have identified for further development. The process also presents an opportunity for countries involved to benchmark their national spent fuel and radioactive waste safety programmes against prevailing international practice. The paper elaborates the detailed elements involved and discusses the experience from the first review meeting of Contracting Parties, and issues envisaged for consideration at the second review meeting scheduled for May 2006. (authors)« less

Fluoroscopic Sacroiliac Joint Injection: Is Oblique Angulation Really Necessary?

PubMed

Khuba, Sandeep; Agarwal, Anil; Gautam, Sujeet; Kumar, Sanjay

2016-01-01

The conventional technique for sacroiliac (SI) joint injection involves aligning the anterior and posterior aspects of the SI joint under fluoroscopic guidance and then entering the SI joint in the most caudal aspect. We wish to highlight that there is no added advantage to aligning both the anterior and posterior joint lines of the SI joint as it is time consuming, associated with additional radiation exposure, and may make the entry into the posterior SI joint technically more difficult. Observational study. Pain Clinic, Department of Anesthesiology. With the patient lying prone on fluoroscopy table, SI joint injection is performed with a 22 G, 10 cm spinal needle in a true anteroposterior (AP) view, where anterior and posterior SI joint spaces are seen as separate entities, where the medial joint space represents the posterior SI joint and the lateral joint space represents the anterior SI joint. The distal 1 cm of the medial joint space is entered under AP view. If the SI joint is seen as a straight line rather than 2 joint spaces in the AP view then the image intensifier of the fluoroscope was tilted cranially to elongate the image of the lower part of the posterior SI joint, thus facilitating entry into this part of the joint which was confirmed by administering 0.3 to 0.5 mL of radiopaque contrast medium. Sixty SI joints of 58 patients were injected under an AP fluoroscopic view. Forty-two (70%) SI joints were seen as 2 separate medial and lateral joint spaces and were entered in distal 1 cm of the medial joint space. In 18 (30%) joints seen as a straight line rather than 2 separate spaces, the image intensifier of the fluoroscope was tilted cranially to elongate the image of the lower part of the posterior SI joint and then the SI joint was entered in its distal 1 cm. Confirmation of entry into the SI joint was confirmed by with 0.3 to 0.5 mL of radiopaque contrast medium. In 4 cases the joints did not show the correct radiopaque contrast spread (3/42 and 1

Involvement of the MAPK pathway in the pressure-induced synovial metaplasia procedure for the temporomandibular joint.

PubMed

Wu, M J; Lu, H P; Gu, Z Y; Zhou, Y Q

2016-06-20

Abnormal pressure is an important factor that contributes to bone adaptation in the temporomandibular joint (TMJ). We determined the effect of the mitogen-activated protein kinases (MAPK) pathway on the pressure-induced synovial metaplasia procedure for the TMJ, both in vitro and in vivo. Synovial fibroblasts (SFs) were exacted from rat TMJs and exposed to different hydrostatic pressures. The protein extracts were analyzed to determine the activation of ERK1/2, JNK, and p38. Surgical anterior disc displacement (ADD) was also performed on Japanese rabbits, and the proteins of TMJ were isolated to analyze pressure-induced MAPK activation after 1, 2, 4, and 8 weeks. The results showed that the activation of ERK1/2 and JNK in SFs significantly changed with increasing hydrostatic pressure, whereas p38 activation did not change. Moreover, p38 was activated in animals 1 week after surgical ADD. The levels of p38 gradually increased after 2 and 4 weeks, and then slightly decreased but remained higher than in the control 8 weeks after surgical ADD. Nevertheless, JNK was rarely activated after the ADD treatment. Our findings suggest the involvement of MAPK activation in the pressure-induced synovial metaplasia procedure with pressure loading in TMJ.

Religious factors associated with alcohol involvement: results from the Mauritian Joint Child Health Project.

PubMed

Luczak, Susan E; Prescott, Carol A; Dalais, Cyril; Raine, Adrian; Venables, Peter H; Mednick, Sarnoff A

2014-02-01

The purpose of this study was to examine religious factors associated with alcohol involvement in Mauritius. The three main religions on the island, Hinduism, Catholicism, and Islam, promote different views of the appropriate use of alcohol. Based on reference group theory, we hypothesized that both the content of a religion's alcohol norms and an individual's religious commitment would relate to alcohol use behavior. Participants were from the Joint Child Health Project, a longitudinal study that has followed a birth cohort of 1.795 individuals since 1972 when they were 3 years old. All available participants (67%; 55% male) were assessed in mid-adulthood on religious variables, lifetime drinking, and lifetime alcohol use disorders. Across religions, individuals who viewed their religion as promoting abstinence were less likely to be drinkers. Religious commitment was associated with reduced probability of drinking only in those who viewed their religion as promoting abstinence. Among drinkers, abstention norms and religious commitment were not associated with lower likelihood of alcohol use disorders. In Catholics who viewed their religion as promoting abstinence and still were drinkers, high religious commitment was associated with increased risk for alcohol use disorders. Predictions based on reference group theory were largely supported, with religious norms and commitment differentially related to alcohol use and problems both across religions and among individuals within religions. Findings highlight the importance of examining multiple aspects of religion to better understand the relationship of religion with alcohol behaviors. Copyright © 2013 Elsevier Ireland Ltd. All rights reserved.

Resident accuracy of joint line palpation using ultrasound verification.

PubMed

Rho, Monica E; Chu, Samuel K; Yang, Aaron; Hameed, Farah; Lin, Cindy Yuchin; Hurh, Peter J

2014-10-01

To determine the accuracy of knee and acromioclavicular (AC) joint line palpation in Physical Medicine and Rehabilitation (PM&R) residents using ultrasound (US) verification. Cohort study. PM&R residency program at an academic institution. Twenty-four PM&R residents participating in a musculoskeletal US course (7 PGY-2, 8 PGY-3, and 9 PGY4 residents). Twenty-four PM&R residents participating in an US course were asked to palpate the AC joint and lateral joint line of the knee in a female and male model before the start of the course. Once the presumed joint line was localized, the residents were asked to tape an 18-gauge, 1.5-inch, blunt-tip needle parallel to the joint line on the overlying skin. The accuracy of needle placement over the joint line was verified using US. US verification of correct needle placement over the joint line. Overall AC joint palpation accuracy was 16.7%, and knee lateral joint line palpation accuracy was 58.3%. Based on the resident level of education, using a value of P < .05, there were no statistically significant differences in the accuracy of joint line palpation. Residents in this study demonstrate poor accuracy of AC joint and lateral knee joint line identification by palpation, using US as the criterion standard for verification. There were no statistically significant differences in the accuracy rates of joint line palpation based on resident level of education. US may be a useful tool to use to advance the current methods of teaching the physical examination in medical education. Copyright © 2014 American Academy of Physical Medicine and Rehabilitation. Published by Elsevier Inc. All rights reserved.

Where the Action Is; A Log of Successful Urban Programs Involving Businessmen, Chambers of Commerce or Associations.

ERIC Educational Resources Information Center

Chamber of Commerce of the United States, Washington, DC.

This log cites about 150 successful programs, dealing with key urban problems, which involve businessmen either individually or through efforts of their companies, chambers of commerce, and trade and professional associations. The examples are listed alphabetically by location by city or state name for statewide programs. A few national programs…

Hospital Guidelines for Diabetes Management and the Joint Commission-American Diabetes Association Inpatient Diabetes Certification.

PubMed

Arnold, Pamela; Scheurer, Danielle; Dake, Andrew W; Hedgpeth, Angela; Hutto, Amy; Colquitt, Caroline; Hermayer, Kathie L

2016-04-01

The Joint Commission Advanced Inpatient Diabetes Certification Program is founded on the American Diabetes Association's Clinical Practice Recommendations and is linked to the Joint Commission Standards. Diabetes currently affects 29.1 million people in the USA and another 86 million Americans are estimated to have pre-diabetes. On a daily basis at the Medical University of South Carolina (MUSC) Medical Center, there are approximately 130-150 inpatients with a diagnosis of diabetes. The program encompasses all service lines at MUSC. Some important features of the program include: a program champion or champion team, written blood glucose monitoring protocols, staff education in diabetes management, medical record identification of diabetes, a plan coordinating insulin and meal delivery, plans for treatment of hypoglycemia and hyperglycemia, data collection for incidence of hypoglycemia, and patient education on self-management of diabetes. The major clinical components to develop, implement, and evaluate an inpatient diabetes care program are: I. Program management, II. Delivering or facilitating clinical care, III. Supporting self-management, IV. Clinical information management and V. performance measurement. The standards receive guidance from a Disease-Specific Care Certification Advisory Committee, and the Standards and Survey Procedures Committee of the Joint Commission Board of Commissioners. The Joint Commission-ADA Advanced Inpatient Diabetes Certification represents a clinical program of excellence, improved processes of care, means to enhance contract negotiations with providers, ability to create an environment of teamwork, and heightened communication within the organization. Published by Elsevier Inc.

Ipsilateral Closed Clavicle and Scapular spine Fracture with Acromioclavicular Joint Disruption.

PubMed

Kembhavi, Raghavendra S; James, Boblee

2015-01-01

Injuries around shoulder and clavicle are quite common. Injuries involving lateral end of clavicle involving acromioclavicular joints are commoner injuries. In this rare injury, we report about a case involving clavicle and scapular spine fracture with acromioclavicular disruption which has never been described in English literature as per our knowledge. A patient with closed clavicle and scapular spine fracture with acromioclavicular joint disruption was treated with open reduction and internal fixation of clavicle and scapular spine as a staged procedures. Six months post operatively, patient had excellent functional recovery with near full range of movements. Though rare complex injury, clavicle fracture with scapular spine fracture with acromioclavicular disruption, when managed properly with good physiotherapy protocol post operatively will result in good clinical and functional outcome.

RETURN TO DIVISION IA FOOTBALL FOLLOWING A 1ST METATARSOPHALANGEAL JOINT DORSAL DISLOCATION

PubMed Central

Cook, Chad; Zarzour, Hap; Moorman, Claude T.

2010-01-01

Background. Although rare in occurrence, a dorsal dislocation of the 1st metatarsophalangeal (MTP) joint has been successfully treated using surgical and/or non-operative treatment. No descriptions of conservative intervention following a dorsal dislocation of the MTP joint in an athlete participating in a high contact sport are present in the literature. Objectives. The purpose of this case report is to describe the intervention and clinical reasoning during the rehabilitative process of a collegiate football player diagnosed with a 1st MTP joint dorsal dislocation. The plan of care and return to play criteria used for this athlete are presented. Case Description. The case involved a 19-year-old male Division IA football player, who suffered a traumatic dorsal dislocation of the 1st MTP joint during practice. The dislocation was initially treated on-site by closed reduction. Non-operative management included immobilization, therapeutic exercises, non-steroidal anti-inflammatories, manual treatment, modalities, prophylactic athletic taping, gait training, and a sport specific progression program for full return to Division IA football. Outcomes. Discharge from physical therapy occurred after six weeks of treatment. At discharge, no significant deviations existed during running, burst, and agility related drills. At a six-month follow-up, the patient reported full return to all football activities including contact drills without restrictions. Discussion. This case describes an effective six-week rehabilitation intervention for a collegiate football player who sustained a traumatic great toe dorsal dislocation. Further study is suggested to evaluate the intervention strategies and timeframe for return to contact sports. PMID:21589669

Temporo-mandibular joint disease in ankylosing spondylitis.

PubMed Central

Davidson, C; Wojtulewski, J A; Bacon, P A; Winstock, D

1975-01-01

The occurrence of temporo-mandibular joint (TMJ) disease in ankylosing spondylitis is not widely recognized and its incidence is disputed. Seventy-nine patients attending two routine rheumatology clinics were therefore examined by dental surgeon and nine (11-5 per cent) were considered to have specific TMJ involvement. These patients were older than the remainder, and had more extensive spinal and peripheral joint disease. Symptoms were mild and the predominant clinical feature was restricted mouth opening, which could present considerable difficulties during emergency anaesthesia. Bilateral condylectomy was undertaken in one patient with some benefit. Images PMID:1124959

Mechanical end joint system for connecting structural column elements

NASA Technical Reports Server (NTRS)

Bush, Harold G. (Inventor); Mikulas, Martin M., Jr. (Inventor); Wallsom, Richard E. (Inventor)

1990-01-01

A mechanical end joint system is presented that eliminates the possibility of free movements between the joint halves during loading or vibration. Both node joint body (NJB) and column end joint body (CEJB) have cylindrical engaging ends. Each of these ends has an integral semicircular tongue and groove. The two joint halves are engaged transversely - the tongue of the NJB mating with the groove of the CEJB and vice versa. The joint system employs a spring loaded internal latch mechanism housed in the CEJB. During mating, this mechanism is pushed away from the NJB and enters the NJB when mating is completed. In order to lock the joint and add a preload across the tongue and groove faces, an operating ring collar is rotated through 45 deg causing an internal mechanism to compress a Belleville washer preload mechanism. This causes an equal and opposite force to be exerted on the latch bolt and the latch plunger. This force presses the two joint halves tightly together. In order to prevent inadvertent disassembly, a secondary lock is also engaged when the joint is closed. Plungers are carried in the operating ring collar. When the joint is closed, the plungers fall into tracks on the CEJB, which allows the joint to be opened only when the operating ring collar and plungers are pushed directly away from the joining end. One application of this invention is the rapid assembly and disassembly of diverse skeletal framework structures which is extremely important in many projects involving the exploration of space.

Superior Recess Access of the Lumbar Facet Joint.

PubMed

Demir-Deviren, Sibel; Singh, Sukhminder; Hanelin, Joshua

2017-04-01

Descriptive approach to accessing the lumbar facet joint by superior recess. This study is aimed to describe an approach to accessing the lumbar facet joint through targeting the superior recess during lumbar facet joint injections. Lumbar facet joint injections are routinely performed for both the diagnosis and treatment of chronic low back pain. Previous studies either did not specify which part of the joint to target, or recommended targeting the inferior aspect of the joint to access the inferior recess. One study did mention the superior recess as an alternative to injecting the inferior recess, but none has focused on description of the technique. This is the first time this technique has been described. The records and fluoroscopic images were reviewed for all patients over a period of 9 months (January-September 2012) using the proposed technique. This resulted in a total of 48 patients; 15 men, 29 women, and a total of 117 facet joint intra-articular injections. Among these 48 patients, injections were repeated in total of 4 cases. The average time of injections among 4 repeat cases was 121 days. The success of the procedure was confirmed with an arthrogram demonstrating contrast flowing from the superior recess inferiorly through the joint space. Successful access of the lumbar facet joint through puncture of the superior recess was seen in 114 cases, with 3 unsuccessful attempts to enter facet joints due to osteophytes at involved levels. There were no complications observed during the procedure. We find this approach to be highly successful, safe, and well tolerated by the patient and recommend it as a technique for access of the lumbar facet joint in those patients in whom direct puncture of the inferior recess is difficult.

Strengthening of defected beam-column joints using CFRP.

PubMed

Mahmoud, Mohamed H; Afefy, Hamdy M; Kassem, Nesreen M; Fawzy, Tarek M

2014-01-01

This paper presents an experimental study for the structural performance of reinforced concrete (RC) exterior beam-column joints rehabilitated using carbon-fiber-reinforced polymer (CFRP). The present experimental program consists of testing 10 half-scale specimens divided into three groups covering three possible defects in addition to an adequately detailed control specimen. The considered defects include the absence of the transverse reinforcement within the joint core, insufficient bond length for the beam main reinforcement and inadequate spliced implanted column on the joint. Three different strengthening schemes were used to rehabilitate the defected beam-column joints including externally bonded CFRP strips and sheets in addition to near surface mounted (NSM) CFRP strips. The failure criteria including ultimate capacity, mode of failure, initial stiffness, ductility and the developed ultimate strain in the reinforcing steel and CFRP were considered and compared for each group for the control and the CFRP-strengthened specimens. The test results showed that the proposed CFRP strengthening configurations represented the best choice for strengthening the first two defects from the viewpoint of the studied failure criteria. On the other hand, the results of the third group showed that strengthening the joint using NSM strip technique enabled the specimen to outperform the structural performance of the control specimen while strengthening the joints using externally bonded CFRP strips and sheets failed to restore the strengthened joints capacity.

Nursing Home Stakeholder Views of Resident Involvement in Medical Care Decisions

PubMed Central

Garcia, Theresa J.; Harrison, Tracie C.; Goodwin, James S.

2017-01-01

Demand by nursing home residents for involvement in their medical care, or, patient-centered care, is expected to increase as baby boomers begin seeking long-term care for their chronic illnesses. To explore the needs in meeting this proposed demand, we used a qualitative descriptive method with content analysis to obtain the joint perspective of key stakeholders on the current state of person-centered medical care in the nursing home. We interviewed 31 nursing home stakeholders: 5 residents, 7 family members, 8 advanced practice registered nurses, 5 physicians, and 6 administrators. Our findings revealed constraints placed by the long-term care system limited medical involvement opportunities and created conflicting goals for patient-centered medical care. Resident participation in medical care was perceived as low, but important. The creation of supportive educational programs for all stakeholders to facilitate a common goal for nursing home admission and to provide assistance through the long-term care system was encouraged. PMID:25721717

Blockade of Dickkopf (DKK)-1 induces fusion of sacroiliac joints.

PubMed

Uderhardt, S; Diarra, D; Katzenbeisser, J; David, J-P; Zwerina, J; Richards, W; Kronke, G; Schett, G

2010-03-01

To study whether Dickkopf (DKK)-1, an inhibitor of wingless (Wnt) signalling, is involved in the fusion of sacroiliac joints. Mice transgenic for tumour necrosis factor (TNFtg mice), which develop bilateral sacroiliitis, were treated with vehicle, anti-TNF antibody or anti-DKK1 antibody. Sacroiliac joints were analysed for histological signs of inflammation, bone erosion, osteoclast formation and ankylosis. Moreover, expression of collagen type X, beta-catenin and DKK-1 was assessed by immunohistochemistry. There were no signs of spontaneous ankylosis of the sacroiliac joints in TNFtg mice. TNF blockade effectively reduced inflammation, bone erosion and osteoclast numbers in the sacroiliac joints, but did not lead to ankylosis. Blockade of DKK1 had no effect on inflammatory signs of sacroiliitis, but significantly reduced bone erosions and osteoclast counts. Moreover, DKK1 blockade promoted expression of collagen type X, the formation of hypertrophic chondrocytes and ankylosis of sacroiliac joints. DKK1 influences inflammatory remodelling of sacroiliac joints by prevention of joint ankylosis. This may indicate an important role of the Wnt signalling pathway in the structural bone changes of axial joint disease. Although this model does not reflect the entire spectrum of ankylosing spondylitis in humans, it helps to explain the pathophysiological processes of sacroiliac joint ankylosis, which is a hallmark of the spondyloarthritides.

One Model for Scientist Involvement in K-12 Education: Teachers Experiencing Antarctica and the Arctic Program

NASA Astrophysics Data System (ADS)

Meese, D.; Shipp, S. S.; Porter, M.; Bruccoli, A.

2002-12-01

Scientists involved in the NSF-funded Teachers Experiencing Antarctica and the Arctic (TEA) Program integrate a K-12 science teacher into their polar field project. Objectives of the program include: having the science teacher immersed in the experience of research; 2) through the teacher, leveraging the research experience to better inform teaching practices; and 3) sharing the experience with the broader educational and general community. The scientist - or qualified team member - stays involved with the teacher throughout the program as a mentor. Preparation of the teacher involves a week-long orientation presented by the TEA Program, and a two week pre-expedition visit at the scientist's institution. Orientation acquaints teachers with program expectations, logistical information, and an overview of polar science. While at the scientist's institution, the teacher meets the team, prepares for the field, and strengthens content knowledge. In the field, the teacher is a team member and educational liaison, responding to questions from students and colleagues by e-mail, and posting electronic journals describing the research experience. Upon return, the teachers work closely with colleagues to bring the experience of research into classrooms through creation of activities, design of longer-term student investigations, and presentations at scientific, educational, and community meetings. Interaction with the scientific team continues with a visit by the scientist to the teacher's classrooms, collaboration on presentations at scientific meetings, and consultation on classroom activities. In some cases, the teacher may participate in future expeditions. The involvement by scientists in mentor relationships, such as those of the TEA Program, is critical to improving science education. Many teachers of science have not had the opportunity to participate in field research, which offers valuable first-hand experience about the nature of science, as well as about specific

Analysis of Cracking in Jointed Plain Concrete Pavements

DOT National Transportation Integrated Search

2017-03-01

This paper investigates the trends of longitudinal and transverse cracking in jointed concrete pavements based on Long-Term Pavement Performance (LTPP) Program Strategic Study of Structural Factors for Rigid Pavements (SPS-2) data. The impacts of sla...

Progressive Damage Modeling of Durable Bonded Joint Technology

NASA Technical Reports Server (NTRS)

Leone, Frank A.; Davila, Carlos G.; Lin, Shih-Yung; Smeltzer, Stan; Girolamo, Donato; Ghose, Sayata; Guzman, Juan C.; McCarville, Duglas A.

2013-01-01

The development of durable bonded joint technology for assembling composite structures for launch vehicles is being pursued for the U.S. Space Launch System. The present work is related to the development and application of progressive damage modeling techniques to bonded joint technology applicable to a wide range of sandwich structures for a Heavy Lift Launch Vehicle. The joint designs studied in this work include a conventional composite splice joint and a NASA-patented Durable Redundant Joint. Both designs involve a honeycomb sandwich with carbon/epoxy facesheets joined with adhesively bonded doublers. Progressive damage modeling allows for the prediction of the initiation and evolution of damage. For structures that include multiple materials, the number of potential failure mechanisms that must be considered increases the complexity of the analyses. Potential failure mechanisms include fiber fracture, matrix cracking, delamination, core crushing, adhesive failure, and their interactions. The joints were modeled using Abaqus parametric finite element models, in which damage was modeled with user-written subroutines. Each ply was meshed discretely, and layers of cohesive elements were used to account for delaminations and to model the adhesive layers. Good correlation with experimental results was achieved both in terms of load-displacement history and predicted failure mechanisms.

Impact of a joint labor-management ergonomics program on upper extremity musculoskeletal symptoms among garment workers.

PubMed

Herbert, R; Dropkin, J; Warren, N; Sivin, D; Doucette, J; Kellogg, L; Bardin, J; Kass, D; Zoloth, S

2001-10-01

This study evaluated the effect of an ergonomics intervention program on the prevalence and intensity of symptoms of upper extremity work-related musculoskeletal disorders among 36 garment workers performing an operation called spooling. Adjustable chairs were introduced and workers were trained in their use. Symptom surveys were administered prior to and 6 months after introduction of adjustable chairs. Quantitative pre- and post-intervention measurement of joint position was performed utilizing videotapes among a subgroup of nineteen. Eighty nine percent of the cohort reported pain in either the neck or at least one upper extremity anatomic site prior to the adjustable chair intervention. Among subjects reporting pain at baseline, there were significantly decreased pain levels in 10 of 11 anatomic sites after the intervention. Among all subjects, the proportion reporting pain decreased for each anatomic site following the intervention, with statistically significant decreases in 3 sites. However, there were only modest declines in awkward posture among the videotaped subgroup. This study suggests that introduction of an ergonomics program focused on education and introduction of an adjustable chair may diminish musculoskeletal symptomatology in apparel manufacturing workers.

Joint Duty Prerequisite for Promotion to 07 (Brigadier General

DTIC Science & Technology

1989-03-13

NUMBER)(O LTC Julius E. Coats, Jr. 9. PERFORMING ORGANIZATIN NAME AND ADDRESS I0. PROGRAM ELEMENT. PROJECT. tASK U.S. Army War College AREA 4 WORK...new personnel policy; to wit, the Army leadership at all levels should view joint duty re- quirement for selection for flag officer with a positive...the Army leadership at all levels should view joint duty requirement for selection for flag officer with a positive attitude, not as a means for

Sensitizing Children to the Social and Emotional Mechanisms Involved in Racism: A Program Evaluation

ERIC Educational Resources Information Center

Triliva, Sofia; Anagnostopoulou, Tanya; Vleioras, Georgios

2014-01-01

This paper describes and discusses the results of an intervention aiming to sensitize children to the social and emotional processes involved in racism. The intervention was applied and evaluated in 10 Greek elementary schools. The goals and the intervention methods of the program modules are briefly outlined and the results of the program…

Joint Command Decision Support System

DTIC Science & Technology

2011-06-01

2010 Olympics and Paralympics games , about a hundred agencies and organizations were involved with the safety and security of the games . Accordingly...Joint Task Force Games (JTFG) staff members were augmented with other Command Staff from Canada Command and Canadian Operational Support Command...CANOSCOM) to create an operational HQ. The scenario used for demonstration was based on fictitious Olympic Games (Breton and Guitouni 2008). The scenario

Management of Candida guilliermondii joint infection in a dog.

PubMed

Bufalari, Antonello; Maggio, Chiara; Moretti, Giulia; Crovace, Alberto; Stefanetti, Valentina; Straubinger, Reinhard Konrad; Passamonti, Fabrizio

2016-07-08

Candida spp. are dimorphic fungi in the family Cryptococcaceae. Infections with Candida spp. are usually rare conditions in dogs, but immunocompromised patients have a higher risk for developing invasive candidal infections. A 5-year-old male Boxer, positive to Leishmania infantum, was referred to the Veterinary Teaching Hospital of the Department of Veterinary Medicine, University of Perugia, Italy for examination of a non-weight bearing left hind limb lameness of a duration of at least 3 months. During this period, treatment involved systemic anti-inflammatory medications and intra-articular corticosteroid administration. On presentation, clinical examination and radiographic findings were suggestive of cranial cruciate ligament deficiency. To support this diagnosis a stifle arthroscopy was performed: it confirmed a partial rupture of cranial cruciate ligament. Samples culture of synovial fluid and membrane was routinely collected as well, and revealed Candida guilliermondii joint infection. Treatment for the C. guilliermondii joint infection involved systemic anti-fungal therapy, joint lavage and intra-articular administration of antifungal drugs. Lameness improved markedly during this treatment, but lameness did not resolve completely, probably due to cranial cruciate ligament deficiency. Tibial tuberosity advancement (TTA) was chosen in order to treat stifle instability and was performed 4 weeks following cessation of treatment of the C. guilliermondii joint infection. Six month after TTA the dog showed a completely recovery with no lameness. To the authors' knowledge, this is the first case of Candida spp. joint infection reported in dogs. The cause of the progression of the joint C. guilliermondii infection remains unclear but it may be associated with leishmaniasis or intra-articular corticosteroid injections. Treatment with systemic and intra-articular anti-fungal therapies was successful. In the evaluation of hind limb lameness in a chronically

The joint US-USSR biological satellite program

NASA Technical Reports Server (NTRS)

Souza, K. A.

1979-01-01

The joint US-USSR biological satellite missions carried out in 1975 and 1977 using Cosmos 782 and Cosmos 936 spacecraft, respectively, is reviewed. The experimental equipment and the biological specimens aboard the aircraft are considered, and it is noted that Cosmos 782, unlike Cosmos 936, carried no centrifuges for rats, although it did contain a centrifuge where a variety of biological specimens, including carrot tissue and fruit flies, were subjected to artificial gravity during space flight. The ground control groups, designed for biological experiments under simulated space-conditions, are taken into account. The U.S. experiments aboard the aircraft are described, with attention given to the experiments with rats, fish embryos, plants, and insects. Results of the experiments are noted, including the finding that space flight factors, especially weightlessness, have a measurable effect on the erythropoietic and musculoskeletal systems of rats

15 CFR 296.7 - Joint venture registration.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 15 Commerce and Foreign Trade 1 2013-01-01 2013-01-01 false Joint venture registration. 296.7 Section 296.7 Commerce and Foreign Trade Regulations Relating to Commerce and Foreign Trade NATIONAL INSTITUTE OF STANDARDS AND TECHNOLOGY, DEPARTMENT OF COMMERCE NIST EXTRAMURAL PROGRAMS TECHNOLOGY INNOVATION...

15 CFR 296.7 - Joint venture registration.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 15 Commerce and Foreign Trade 1 2010-01-01 2010-01-01 false Joint venture registration. 296.7 Section 296.7 Commerce and Foreign Trade Regulations Relating to Commerce and Foreign Trade NATIONAL INSTITUTE OF STANDARDS AND TECHNOLOGY, DEPARTMENT OF COMMERCE NIST EXTRAMURAL PROGRAMS TECHNOLOGY INNOVATION...

15 CFR 296.7 - Joint venture registration.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 15 Commerce and Foreign Trade 1 2012-01-01 2012-01-01 false Joint venture registration. 296.7 Section 296.7 Commerce and Foreign Trade Regulations Relating to Commerce and Foreign Trade NATIONAL INSTITUTE OF STANDARDS AND TECHNOLOGY, DEPARTMENT OF COMMERCE NIST EXTRAMURAL PROGRAMS TECHNOLOGY INNOVATION...

15 CFR 296.7 - Joint venture registration.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 15 Commerce and Foreign Trade 1 2011-01-01 2011-01-01 false Joint venture registration. 296.7 Section 296.7 Commerce and Foreign Trade Regulations Relating to Commerce and Foreign Trade NATIONAL INSTITUTE OF STANDARDS AND TECHNOLOGY, DEPARTMENT OF COMMERCE NIST EXTRAMURAL PROGRAMS TECHNOLOGY INNOVATION...

15 CFR 296.7 - Joint venture registration.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 15 Commerce and Foreign Trade 1 2014-01-01 2014-01-01 false Joint venture registration. 296.7 Section 296.7 Commerce and Foreign Trade Regulations Relating to Commerce and Foreign Trade NATIONAL INSTITUTE OF STANDARDS AND TECHNOLOGY, DEPARTMENT OF COMMERCE NIST EXTRAMURAL PROGRAMS TECHNOLOGY INNOVATION...

Reusable Solid Rocket Motor Nozzle Joint-4 Thermal Analysis

NASA Technical Reports Server (NTRS)

Clayton, J. Louie

2001-01-01

This study provides for development and test verification of a thermal model used for prediction of joint heating environments, structural temperatures and seal erosions in the Space Shuttle Reusable Solid Rocket Motor (RSRM) Nozzle Joint-4. The heating environments are a result of rapid pressurization of the joint free volume assuming a leak path has occurred in the filler material used for assembly gap close out. Combustion gases flow along the leak path from nozzle environment to joint O-ring gland resulting in local heating to the metal housing and erosion of seal materials. Analysis of this condition was based on usage of the NASA Joint Pressurization Routine (JPR) for environment determination and the Systems Improved Numerical Differencing Analyzer (SINDA) for structural temperature prediction. Model generated temperatures, pressures and seal erosions are compared to hot fire test data for several different leak path situations. Investigated in the hot fire test program were nozzle joint-4 O-ring erosion sensitivities to leak path width in both open and confined joint geometries. Model predictions were in generally good agreement with the test data for the confined leak path cases. Worst case flight predictions are provided using the test-calibrated model. Analysis issues are discussed based on model calibration procedures.

Promoting Responsible Fatherhood Programming: Factors Affecting Low-Income Fathers' Involvement in Child Protection Services and Court-Restricted Access to Their Children

PubMed Central

Gordon, Derrick M.; Iwamoto, Derek; Watkins, Natasha D.; Kershaw, Trace; Mason, Diana; Judkins, Anthony

2013-01-01

This study investigates how unemployment, traumatic sexual experiences, substance use, intimate partner violence, and parental involvement collectively contribute to involvement with child protective system (CPS) and court-restricted access to children among low-income, ethnically diverse fathers. Participants were 164 fathers involved in a statewide fatherhood program. The majority of the fathers in the program were unemployed (76%) and ethnic minorities (66%). Logistic regression revealed that traumatic sexual experiences and number of children were significant predictors of CPS involvement, whereas employment and traumatic sexual experience were associated with court-restricted access to their children. The results elucidate that clinicians and father-hood programs may need to attend to the history of traumatic experiences, as well as other contextual factors, of fathers and identify how, through trauma-focused interventions, to positively affect them and their children. PMID:24273406

Joint Strike Figher Acquisition: Mature Critical Technologies Needed to Reduce Risks

DTIC Science & Technology

2001-10-01

Reduce Risks GAO-02-39 Report Documentation Page Report Date 00OCT2001 Report Type N/A Dates Covered (from... to) - Title and Subtitle JOINT STRIKE...FIGHTER ACQUISITION: Mature Critical Technologies Needed to Reduce Risks Contract Number Grant Number Program Element Number Author(s) Project...1Joint Strike Fighter Acquisition: Development Schedule Should Be Changed to Reduce Risks (GAO/T-NSIAD-00-132

Cadre Photos for Joint Test Team Feature

NASA Image and Video Library

2017-02-23

During a tour of SpaceX headquarters in Hawthorne, California, commercial crew astronauts Bob Behnken, left, and Eric Boe participate in joint test team training using mockup components of the Crew Dragon on Feb. 23, 2017. Mike Good, program manager for Crew Operations and Testing at Johnson Space Center in Houston, is in the background. Crew Dragon is being developed and manufactured in partnership with NASA's Commercial Crew Program to return human spaceflight capabilities to the U.S.

Joint Solutions to Substance Abuse: Public Sector Employee Assistance Programs.

ERIC Educational Resources Information Center

State and Local Government Labor-Management Committee, Washington, DC.

This short booklet is a joint expression by public sector labor and management that recognizes that neither side has all the answers to the problems of employee substance abuse and that both share a common concern for a successful outcome. The booklet summarizes the dimension of substance abuse in today's workplace; and it tries to encourage…

Joint Soviet-American experiment on hypokinesia: Experimental results

NASA Technical Reports Server (NTRS)

Burovskiy, N. N.

1979-01-01

Comprehensive results are reported from the Soviet portion of a joint Soviet-American experiment involving hypokinesia. The main emphases are on chemical analyses of blood and urine, functional tests, and examination of the cardiovascular system by electrocardiography, echocardiography, and plethysmography.

Parent-adolescent joint projects involving leisure time and activities during the transition to high school.

PubMed

Marshall, Sheila K; Young, Richard A; Wozniak, Agnieszka; Lollis, Susan; Tilton-Weaver, Lauree; Nelson, Margo; Goessling, Kristen

2014-10-01

Leisure research to date has generally overlooked planning and organizing of leisure time and activities between parents and adolescents. This investigation examined how a sample of Canadian adolescents and their parents jointly constructed and acted on goals related to adolescents' leisure time during the move from elementary to high school. Using the Qualitative Action-Project Method, data were collected over an 8-10 month period from 26 parent-adolescent dyads located in two urban sites, through video-taped conversations about leisure time, video recall interviews, and telephone monitoring interviews. Analysis of the data revealed that the joint projects of the 26 dyads could be grouped into three clusters: a) governance transfer or attempts to shift, from parent to adolescent, responsibility over academic demands, organizing leisure time, and safety with peers, b) balancing extra-curricular activities with family life, academics, and social activities, and c) relationship adjustment or maintenance. Crown Copyright © 2014. Published by Elsevier Ltd. All rights reserved.

Review on failure prediction techniques of composite single lap joint

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ab Ghani, A.F., E-mail: ahmadfuad@utem.edu.my; Rivai, Ahmad, E-mail: ahmadrivai@utem.edu.my

2016-03-29

Adhesive bonding is the most appropriate joining method in construction of composite structures. The use of reliable design and prediction technique will produce better performance of bonded joints. Several papers from recent papers and journals have been reviewed and synthesized to understand the current state of the art in this area. It is done by studying the most relevant analytical solutions for composite adherends with start of reviewing the most fundamental ones involving beam/plate theory. It is then extended to review single lap joint non linearity and failure prediction and finally on the failure prediction on composite single lap joint.more » The review also encompasses the finite element modelling part as tool to predict the elastic response of composite single lap joint and failure prediction numerically.« less

Movement coordination patterns between the foot joints during walking.

PubMed

Arnold, John B; Caravaggi, Paolo; Fraysse, François; Thewlis, Dominic; Leardini, Alberto

2017-01-01

In 3D gait analysis, kinematics of the foot joints are usually reported via isolated time histories of joint rotations and no information is provided on the relationship between rotations at different joints. The aim of this study was to identify movement coordination patterns in the foot during walking by expanding an existing vector coding technique according to an established multi-segment foot and ankle model. A graphical representation is also described to summarise the coordination patterns of joint rotations across multiple patients. Three-dimensional multi-segment foot kinematics were recorded in 13 adults during walking. A modified vector coding technique was used to identify coordination patterns between foot joints involving calcaneus, midfoot, metatarsus and hallux segments. According to the type and direction of joints rotations, these were classified as in-phase (same direction), anti-phase (opposite directions), proximal or distal joint dominant. In early stance, 51 to 75% of walking trials showed proximal-phase coordination between foot joints comprising the calcaneus, midfoot and metatarsus. In-phase coordination was more prominent in late stance, reflecting synergy in the simultaneous inversion occurring at multiple foot joints. Conversely, a distal-phase coordination pattern was identified for sagittal plane motion of the ankle relative to the midtarsal joint, highlighting the critical role of arch shortening to locomotor function in push-off. This study has identified coordination patterns between movement of the calcaneus, midfoot, metatarsus and hallux by expanding an existing vector cording technique for assessing and classifying coordination patterns of foot joints rotations during walking. This approach provides a different perspective in the analysis of multi-segment foot kinematics, and may be used for the objective quantification of the alterations in foot joint coordination patterns due to lower limb pathologies or following injuries.

Dataglove measurement of joint angles in sign language handshapes

PubMed Central

Eccarius, Petra; Bour, Rebecca; Scheidt, Robert A.

2012-01-01

In sign language research, we understand little about articulatory factors involved in shaping phonemic boundaries or the amount (and articulatory nature) of acceptable phonetic variation between handshapes. To date, there exists no comprehensive analysis of handshape based on the quantitative measurement of joint angles during sign production. The purpose of our work is to develop a methodology for collecting and visualizing quantitative handshape data in an attempt to better understand how handshapes are produced at a phonetic level. In this pursuit, we seek to quantify the flexion and abduction angles of the finger joints using a commercial data glove (CyberGlove; Immersion Inc.). We present calibration procedures used to convert raw glove signals into joint angles. We then implement those procedures and evaluate their ability to accurately predict joint angle. Finally, we provide examples of how our recording techniques might inform current research questions. PMID:23997644

Program Director as Webmaster? Analysis of 131 Anesthesiology Department Web Sites and Program Director Web Site Involvement and Opinion Survey.

PubMed

Daneshpayeh, Negin; Lee, Howard; Berger, Jeffrey

2013-01-01

The last formal review of academic anesthesiology department Web sites (ADWs) for content was conducted in 2009. ADWs have been rated as very important by medical students in researching residency training programs; however, the rapid evolution of sites require that descriptive statistics must be more current to be considered reliable. We set out to provide an updated overview of ADW content and to better understand residency program directors' (PD) role and comfort with ADWs. Two independent reviewers (ND and HL) analyzed all 131 Accreditation Council for Graduate Medical Education (ACGME) accredited ADWs. A binary system (Yes/No) was used to determine which features were present. Reviewer reliability was confirmed with inter-rater reliability and percentage agreement calculation. Additionally, a blinded electronic survey (Survey Monkey, Portland, OR) was sent to anesthesiology residency PDs via electronic mail investigating the audiences for ADWs, the frequency of updates and the degree of PD involvement. 13% of anesthesiology departments still lack a Web site with a homepage with links to the residency program and educational offerings (18% in 2009). Only half (55%) of Web sites contain information for medical students, including clerkship information. Furthermore, programs rarely contain up-to-date calendars (13%), accreditation cycle lengths (11%), accreditation dates (7%) or board pass rates (6%). The PD survey, completed by 42 of 131 PDs, noted a correlation (r = 0.36) between the number of years as PD and the frequency of Web site updates - less experienced PDs appear to update their sites more frequently (p = 0.03). Although 86% of PDs regarded a Web site as "very" important in recruitment, only 9% felt "very" comfortable with the skills required to advertise and market a Web site. Despite the overall increase in ADW content since 2009, privacy concerns, limited resources and time constraints may prevent PDs from providing the most up-to-date Web sites for

Joint NASA/USAF Airborne Field Mill Program - Operation and safety considerations during flights of a Lear 28 airplane in adverse weather

NASA Technical Reports Server (NTRS)

Fisher, Bruce D.; Phillips, Michael R.; Maier, Launa M.

1992-01-01

A NASA Langley Research Center Learjet 28 research airplane was flown in various adverse weather conditions in the vicinity of the NASA Kennedy Space Center from 1990-1992 to measure airborne electric fields during the Joint NASA/USAF Airborne Field Mill Program. The objective of this program was to characterize the electrical activity in various weather phenomena common to the NASA-Kennedy area in order to refine Launch Commit Criteria for natural and triggered lightning. The purpose of the program was to safely relax the existing launch commit criteria, thereby increasing launch availability and reducing the chance for weather holds and delays. This paper discusses the operational conduct of the flight test, including environmental/safety considerations, aircraft instrumentation and modification, test limitations, flight procedures, and the procedures and responsibilities of the personnel in the ground station. Airborne field mill data were collected for all the Launch Commit Criteria during two summer and two winter deployments. These data are now being analyzed.

Global-Local Finite Element Analysis of Bonded Single-Lap Joints

NASA Technical Reports Server (NTRS)

Kilic, Bahattin; Madenci, Erdogan; Ambur, Damodar R.

2004-01-01

Adhesively bonded lap joints involve dissimilar material junctions and sharp changes in geometry, possibly leading to premature failure. Although the finite element method is well suited to model the bonded lap joints, traditional finite elements are incapable of correctly resolving the stress state at junctions of dissimilar materials because of the unbounded nature of the stresses. In order to facilitate the use of bonded lap joints in future structures, this study presents a finite element technique utilizing a global (special) element coupled with traditional elements. The global element includes the singular behavior at the junction of dissimilar materials with or without traction-free surfaces.

Mining Properties in Washington that were involved in the DMA, DMEA, OME Mineral Exploration Programs, 1950-1974

USGS Publications Warehouse

Kiilsgaard, Thor H.

1998-01-01

Introduction This report and accompanying map (Plate 1) presents information on the Defense Minerals Administration (DMA), Defense Minerals Exploration Administration (DMEA), and Office of Minerals Exploration (OME) mineral exploration programs in Washington. Under these programs, the federal government participated in the exploration costs for certain strategic and critical minerals. Federal funds for mineral exploration under the programs were available from 1950 to 1974, although limited funds for OME administrative work were continued until 1979. The report reviews the three programs, associated regulations, administrative procedures, and operational techniques. It also describes the various types of informative reports generated by the programs, lists mining properties in Washington that were involved in the exploration programs, and advises on location of compiled exploration information that resulted from the work.

Dynamic Cytology and Transcriptional Regulation of Rice Lamina Joint Development1[OPEN

PubMed Central

2017-01-01

Rice (Oryza sativa) leaf angle is determined by lamina joint and is an important agricultural trait determining leaf erectness and, hence, the photosynthesis efficiency and grain yield. Genetic studies reveal a complex regulatory network of lamina joint development; however, the morphological changes, cytological transitions, and underlying transcriptional programming remain to be elucidated. A systemic morphological and cytological study reveals a dynamic developmental process and suggests a common but distinct regulation of the lamina joint. Successive and sequential cell division and expansion, cell wall thickening, and programmed cell death at the adaxial or abaxial sides form the cytological basis of the lamina joint, and the increased leaf angle results from the asymmetric cell proliferation and elongation. Analysis of the gene expression profiles at four distinct developmental stages ranging from initiation to senescence showed that genes related to cell division and growth, hormone synthesis and signaling, transcription (transcription factors), and protein phosphorylation (protein kinases) exhibit distinct spatiotemporal patterns during lamina joint development. Phytohormones play crucial roles by promoting cell differentiation and growth at early stages or regulating the maturation and senescence at later stages, which is consistent with the quantitative analysis of hormones at different stages. Further comparison with the gene expression profile of leaf inclination1, a mutant with decreased auxin and increased leaf angle, indicates the coordinated effects of hormones in regulating lamina joint. These results reveal a dynamic cytology of rice lamina joint that is fine-regulated by multiple factors, providing informative clues for illustrating the regulatory mechanisms of leaf angle and plant architecture. PMID:28500269

Ability of finger-jointed lumber to maintain load at elevated temperatures

Treesearch

Douglas R. Rammer; Samuel L. Zelinka; Laura E Hasburgh; Steven T. Craft

2018-01-01

This article presents a test method that was developed to screen adhesive formulations for finger-jointed lumber. The goal was to develop a small-scale test that could be used to predict whether an adhesive would pass a full-scale ASTM E119 wall assembly test. The method involved loading a 38-mm square finger-jointed sample in a four-point bending test inside of an...

32 CFR 37.220 - How involved should the Government program official be in the project?

Code of Federal Regulations, 2010 CFR

2010-07-01

... project? (a) TIAs are used to carry out cooperative relationships between the Federal Government and the... programmatic involvement before and during program execution with a TIA can reduce the need for some Federal... traditionally would be your exclusive responsibility as the agreements officer. TIAs therefore also require...

Joint Chemical Agent Detector (JCAD): the future of chemical agent detection

NASA Astrophysics Data System (ADS)

Laljer, Charles E.; Owen, Jeffery L.

2002-06-01

The Joint Chemical Agent Detector (JCAD) will provide state of the art chemical warfare agent detection capability to ground vehicle operators. Intelligence sources estimate that over twenty counties have active chemical weapons programs. The spread of chemical weapons to third world nations, coupled with the potential for US involvement in these areas in an operational or support capacity, increases the probability that the Joint Services may encounter chemical agents and toxic industrial materials anywhere in the world. Currently, fielded chemical agent detectors are bulky, labor intensive, and subject to false readings. No legacy detector is sensitive enough to provide detection and warning of the low dose hazards associated with miosis contamination. The JCAD will provide a small, lightweight chemical agent detector for vehicle interiors, aircraft, individual personnel, shipboard, and fixed site locations. The system provides a common detection components across multi-service platforms. This common detector system will allow the Joint Services to use the same operational and support concept for more efficient utilization of resources. The JCAD will detect, identify, quantify, and warn of the presence of chemical agents prior to onset of miosis. Upon detection of chemical agents, the detector will provide local and remote audible and visual alarms to the operators. Advance warning will provide the vehicle crew with the time necessary to protect themselves from the lethal effects of chemical agents. The JCAD will also be capable of being upgraded to protect against future chemical agent threats. The JCAD will provide the vehicle operators with the warning necessary to survive and fight in a chemical warfare agent threat environment.

Synergistic Approach Integrating Joint Capabilities for USSOCOM Contingency Contracting: Construction Management Module

DTIC Science & Technology

2010-12-01

59 a. The Joint Uniform Lessons Learned System (JULLS) .........59 b. Acquisition Community Connection (ACC) ..........................59 c...Report ACC Acquisition Community Connection ADDIE Analyze, Design, Develop, Implement, Evaluate AFFARS Air Force Federal Acquisition Regulation...Operations J4 Logistics J5 Plans J6 Communications J8 Programming and Comptroller J&A Justification and Approval JARB Joint Acquisition

Self-management improvement program combined with community involvement in Thai hypertensive population: an action research.

PubMed

Srichairattanakull, Jeamjai; Kaewpan, Wonpen; Powattana, Arpaporn; Pichayapinyo, Panan

2014-04-01

To investigate the effectiveness of a program that utilizes community involvement to improve the self-management strategies among people living with hypertension. Forty-four subjects, aged 35 to 59-year-old, with hypertension in Nakhon Pathom Province, Thailand, were randomly allocated to either an experimental group (n = 22) or a control group (n = 20). The experimental group attended a program to improve self-management methods based on social cognitive theory (SCT). The program lasted 12 weeks, consisted of 1 1/2 hours meeting once a week, including group meetings and home visit monitoring. Mann-Whitney U test and Friedman test were employed to analyze the program's effectiveness. After the program, the mean rank of the perceived self-efficacy for the self-management strategies was statistically different between the two groups (p = 0.023). In the experimental group, after the twelve week, the mean rank of perceived self-efficacy and outcome expectancy increased and diastolic blood pressure decreased after the eight week. The program applied social cognitive theory (SCT) to promote self-management techniques, increased the health promoting behavior among hypertensive people.

A family involvement and patient-tailored health management program in elderly Korean stroke patients' day care centers.

PubMed

Chang, Ae Kyung; Park, Yeon-Hwan; Fritschi, Cynthia; Kim, Mi Ja

2015-01-01

This study aimed to examine the effects of a family involvement and functional rehabilitation program in an adult day care center on elderly Korean stroke patients' perceived health, activities of daily living, instrumental activities of daily living, and cost of health services, and on family caregivers' satisfaction. Using one-group pre- and posttest design, dyads consisting of 19 elderly stroke patients and family caregivers participated in 12-week intervention, including involvement of family caregivers in day care services and patient-tailored health management. Outcomes of patients and caregivers were significantly improved (all p < .001). However, the cost of health services did not decrease significantly. This program improved functional levels and health perception of elderly stroke patients and caregivers' satisfaction. However, results must be interpreted with caution, because this was only a small, single-group pilot study. This program may be effective for elderly stroke patients and their caregivers. © 2013 Association of Rehabilitation Nurses.

The RMTC as a result of 10-year fruitful joint cooperation of the USA, EC and Russia under NMC&A programs

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dickman, Deborah A.; Frigola, P.; Guardini, Sergio

The Ministry for Atomic Energy of the Russian Federation made the decision to establish the Russian Methodological and Training Center (RMTC) not only as the leading center on personnel training in nuclear material control and accounting (NMC&A) field, but also as the center for rendering methodological support to specialists and inspectors in the course of development and implementation of a new Russian NMC&A system and to the state authorities in their regulatory activities. The importance of the project on RMTC establishment and development was the main reason for concentrating significant efforts not only of the United States (U.S.) National Laboratoriesmore » but also of the European Commission's (EC) Joint Research Center (JRC). The coordination of their efforts in the projects implemented under the U.S.-Russia cooperative program and Technical Assistance to the Commonwealth of Independent States (TACIS) program resulted in establishing the RMTC, a unique NMC&A methodological and training center in Russia, that has the state-of-the-art instrumentation and tools and highly qualified personnel. The Center has the possibility to invite not only the State Scientific Center of the Russian Federation - Institute of Physics and Power Engineering named after A. I. Leypunsky (IPPE) specialists but also the specialists from other facilities and agencies to serve as instructors. By now the firm basis for methodological activity has been established in the Center. The RMTC specialists render their knowledge and expertise for many projects on NMC&A upgrading. The RMTC methodological activity is primarily concentrated on development of guidelines on the use of new federal and Rosatom NMC&A regulatory documents. This work is being done with the use of resources and potential of the TACIS program and U.S.-Russia MPC&A program. The paper presents a brief summary of the results achieved in the course of RMTC creation and evolution during the 10-year joint Russian, U.S. and

Joint Attention in Infant-Toddler Early Childhood Programs: Its Dynamics and Potential for Collaborative Learning

ERIC Educational Resources Information Center

Degotardi, Sheila

2017-01-01

This article examines how joint attention episodes constitute a core feature of relational pedagogy for infants and toddlers. It draws on social interactionist approaches to language and cognitive development to propose that joint attention may afford significant current and future potential for young children's learning. However, most joint…

Spacesuit mobility joints

NASA Technical Reports Server (NTRS)

Vykukal, H. C. (Inventor)

1978-01-01

Joints for use in interconnecting adjacent segments of an hermetically sealed spacesuit which have low torques, low leakage and a high degree of reliability are described. Each of the joints is a special purpose joint characterized by substantially constant volume and low torque characteristics. Linkages which restrain the joint from longitudinal distension and a flexible, substantially impermeable diaphragm of tubular configuration spanning the distance between pivotally supported annuli are featured. The diaphragms of selected joints include rolling convolutions for balancing the joints, while various joints include wedge-shaped sections which enhance the range of motion for the joints.

A universal six-joint robot controller

NASA Technical Reports Server (NTRS)

Bihn, D. G.; Hsia, T. C.

1987-01-01

A general purpose six-axis robotic manipulator controller was designed and implemented to serve as a research tool for the investigation of the practical and theoretical aspects of various control strategies in robotics. A 80286-based Intel System 310 running the Xenix operating servo software as well as the higher level software (e.g., kinematics and path planning) were employed. A Multibus compatible interface board was designed and constructed to handle I/O signals from the robot manipulator's joint motors. From the design point of view, the universal controller is capable of driving robot manipulators equipped with D.C. joint motors and position optical encoders. To test its functionality, the controller is connected to the joint motor D.C. power amplifier of a PUMA 560 arm bypassing completely the manufacturer-supplied Unimation controller. A controller algorithm consisting of local PD control laws was written and installed into the Xenix operating system. Additional software drivers were implemented to allow application programs access to the interface board. All software was written in the C language.

A Probabilistic Approach to Predict Thermal Fatigue Life for Ball Grid Array Solder Joints

NASA Astrophysics Data System (ADS)

Wei, Helin; Wang, Kuisheng

2011-11-01

Numerous studies of the reliability of solder joints have been performed. Most life prediction models are limited to a deterministic approach. However, manufacturing induces uncertainty in the geometry parameters of solder joints, and the environmental temperature varies widely due to end-user diversity, creating uncertainties in the reliability of solder joints. In this study, a methodology for accounting for variation in the lifetime prediction for lead-free solder joints of ball grid array packages (PBGA) is demonstrated. The key aspects of the solder joint parameters and the cyclic temperature range related to reliability are involved. Probabilistic solutions of the inelastic strain range and thermal fatigue life based on the Engelmaier model are developed to determine the probability of solder joint failure. The results indicate that the standard deviation increases significantly when more random variations are involved. Using the probabilistic method, the influence of each variable on the thermal fatigue life is quantified. This information can be used to optimize product design and process validation acceptance criteria. The probabilistic approach creates the opportunity to identify the root causes of failed samples from product fatigue tests and field returns. The method can be applied to better understand how variation affects parameters of interest in an electronic package design with area array interconnections.

Cryotherapy does not impair shoulder joint position sense.

PubMed

Dover, Geoffrey; Powers, Michael E

2004-08-01

To determine the effects of a cryotherapy treatment on shoulder proprioception. Crossover design with repeated measures. University athletic training and sports medicine research laboratory. Thirty healthy subjects (15 women, 15 men). A 30-minute cryotherapy treatment. Joint position sense was measured in the dominant shoulder by using an inclinometer before and after receiving 30 minutes of either no ice or a 1-kg ice bag application. Skin temperature was measured below the tip of the acromion process and recorded every 5 minutes for the entire 30 minutes and immediately after testing. Three different types of error scores were calculated for data analyses and used to determine proprioception. Separate analyses of absolute, constant, and variable error failed to identify changes in shoulder joint proprioception as a function of the cryotherapy application. Application of an ice bag to the shoulder does not impair joint position sense. The control of proprioception at the shoulder may be more complex than at other joints in the body. Clinical implications may involve modifying rehabilitation considerations when managing shoulder injuries.

Joint venture versus outreach: a financial analysis of case studies.

PubMed

Forsman, R W

2001-01-01

Medical centers across the country are facing cost challenges, and national commercial laboratories are experiencing financial declines that necessitate their capturing market share in any way possible. Many laboratories are turning to joint ventures or partnerships for financial relief. However, it often is in the best interest of the patient and the medical center to integrate laboratory services across the continuum of care. This article analyzes two hypothetical joint ventures involving a laboratory management agreement and full laboratory outsourcing.

Mining Properties in Oregon that were Involved in the DMA, DMEA, OME Mineral Exploration Programs, 1950-1974

USGS Publications Warehouse

Kiilsgaard, Thor H.

1998-01-01

Introduction This report and accompanying map (Plate 1) presents information on the Defense Minerals Administration (DMA), Defense Minerals Exploration Administration (DMEA), and Office of Minerals Exploration (OME) mineral exploration programs in Oregon. Under these programs, the federal government participated in the exploration costs for certain strategic and critical minerals. Federal funds for mineral exploration under the programs were available from 1950 to 1974, although limited funds for OME administrative work were continued until 1979. The report reviews the three programs, associated regulations, administrative procedures, and operational techniques. It also describes the various types of informative reports on individual mining properties generated by the programs, lists properties in Oregon that were involved in the different exploration programs, and advises on the location of compiled information that resulted from the work.

Design/Analysis of Metal/Composite Bonded Joints for Survivability at Cryogenic Temperatures

NASA Technical Reports Server (NTRS)

Bartoszyk, Andrew E.

2004-01-01

A major design and analysis challenge for the JWST ISM structure is the metal/composite bonded joints that will be required to survive down to an operational ultra-low temperature of 30K (-405 F). The initial and current baseline design for the plug-type joint consists of a titanium thin walled fitting (1-3mm thick) bonded to the interior surface of an M555/954-6 composite truss square tube with an axially stiff biased lay-up. Metallic fittings are required at various nodes of the truss structure to accommodate instrument and lift-point bolted interfaces. Analytical experience and design work done on metal/composite bonded joints at temperatures below liquid nitrogen are limited and important analysis tools, material properties, and failure criteria for composites at cryogenic temperatures are virtually nonexistent. Increasing the challenge is the difficulty in testing for these required tools and parameters at 30K. A preliminary finite element analysis shows that failure due to CTE mismatch between the biased composite and titanium or aluminum is likely. Failure is less likely with Invar, however an initial mass estimate of Invar fittings demonstrates that Invar is not an automatic alternative. In order to gain confidence in analyzing and designing the ISM joints, a comprehensive joint development testing program has been planned and is currently running. The test program is designed for the correlation of the analysis methodology, including tuning finite element model parameters, and developing a composite failure criterion for the effect of multi-axial composite stresses on the strength of a bonded joint at 30K. The testing program will also consider stress mitigation using compliant composite layers and potential strength degradation due to multiple thermal cycles. Not only will the finite element analysis be correlated to the test data, but the FEA will be used to guide the design of the test. The first phase of the test program has been completed and the

Joint Air-to-Surface Standoff Missile (JASSM)

DTIC Science & Technology

2015-12-01

6.1.3) All Ops All Ops Joint Critical Ops All Ops All Ops Missile Reliability (KSA) (CPD para 6.2.8) 4th Lot .91 4th Lot .91 IOT &E .80 4th Lot .85 IOT &E...the ORD 303-95-III dated January 20, 2004 Change Explanations None Acronyms and Abbreviations IOT &E - Initial Operational Test and Evaluation KSA... Actuator Control Card, Lots 12 and 4 Systems Engineering Program Support/Program Tooling and Test Equipment, and JASSM-ER Standard Data Protocol (DS

Identification of inflammation sites in arthritic joints using hyperspectral imaging

NASA Astrophysics Data System (ADS)

Paluchowski, Lukasz A.; Milanic, Matija; Bjorgan, Asgeir; Grandaunet, Berit; Dhainaut, Alvilde; Hoff, Mari; Randeberg, Lise L.

2014-03-01

Inflammatory arthritic diseases have prevalence between 2 and 3% and may lead to joint destruction and deformation resulting in a loss of function. Patient's quality of life is often severely affected as the disease attacks hands and finger joints. Pathology involved in arthritis includes angiogenesis, hyper-vascularization, hyper-metabolism and relative hypoxia. We have employed hyperspectral imaging to study the hemodynamics of affected- and non-affected joints and tissue. Two hyperspectral, push-broom cameras were used (VNIR-1600, SWIR-320i, Norsk Elektro Optikk AS, Norway). Optical spectra (400nm - 1700nm) of high spectral resolution were collected from 15 patients with visible symptoms of arthritic rheumatic diseases in at least one joint. The control group consisted of 10 healthy individuals. Concentrations of dominant chromophores were calculated based on analytical calculations of light transport in tissue. Image processing was used to analyze hyperspectral data and retrieve information, e.g. blood concentration and tissue oxygenation maps. The obtained results indicate that hyperspectral imaging can be used to quantify changes within affected joints and surrounding tissue. Further improvement of this method will have positive impact on diagnosis of arthritic joints at an early stage. Moreover it will enable development of fast, noninvasive and noncontact diagnostic tool of arthritic joints

An Evolving Joint Acquisition Force

DTIC Science & Technology

2004-03-19

COVERED - 4. TITLE AND SUBTITLE An Evolving Joint Acquisition Force 5a. CONTRACT NUMBER 5b. GRANT NUMBER 5c. PROGRAM ELEMENT NUMBER 6. AUTHOR( S ...Theodore Jennings 5d. PROJECT NUMBER 5e. TASK NUMBER 5f. WORK UNIT NUMBER 7. PERFORMING ORGANIZATION NAME( S ) AND ADDRESS(ES) U.S. Army War...College,Carlisle Barracks,Carlisle,PA,17013-5050 8. PERFORMING ORGANIZATION REPORT NUMBER 9. SPONSORING/MONITORING AGENCY NAME( S ) AND ADDRESS(ES) 10

Preliminary Design and Analysis of an In-plane PRSEUS Joint

NASA Technical Reports Server (NTRS)

Lovejoy, Andrew E.; Poplawski, Steven

2013-01-01

As part of the National Aeronautics and Space Administration's (NASA's) Environmentally Responsible Aviation (ERA) program, the Pultruded Rod Stitched Efficient Unitized Structure (PRSEUS) has been designed, developed and tested. However, PRSEUS development efforts to date have only addressed joints required to transfer bending moments between PRSEUS panels. Development of in-plane joints for the PRSEUS concept is necessary to facilitate in-plane transfer of load from PRSEUS panels to an adjacent structure, such as from a wing panel into a fuselage. This paper presents preliminary design and analysis of an in-plane PRSEUS joint for connecting PRSEUS panels at the termination of the rod-stiffened stringers. Design requirements are provided, the PRSEUS blade joint concept is presented, and preliminary design changes and analyses are carried out to examine the feasibility of the proposed in-plane PRSEUS blade joint. The study conducted herein focuses mainly on the PRSEUS structure on one side of the joint. In particular, the design requirements for the rod shear stress and bolt bearing stress are examined. A PRSEUS blade joint design was developed that demonstrates the feasibility of this in-plane PRSEUS joint concept to terminate the rod-stiffened stringers. The presented design only demonstrates feasibility, therefore, some areas of refinement are presented that would lead to a more optimum and realistic design.

Joint attention in parent-child dyads involving children with selective mutism: a comparison between anxious and typically developing children.

PubMed

Nowakowski, Matilda E; Tasker, Susan L; Cunningham, Charles E; McHolm, Angela E; Edison, Shannon; Pierre, Jeff St; Boyle, Michael H; Schmidt, Louis A

2011-02-01

Although joint attention processes are known to play an important role in adaptive social behavior in typical development, we know little about these processes in clinical child populations. We compared early school age children with selective mutism (SM; n = 19) versus mixed anxiety (MA; n = 18) and community controls (CC; n = 26) on joint attention measures coded from direct observations with their parent during an unstructured free play task and two structured tasks. As predicted, the SM dyads established significantly fewer episodes of joint attention through parental initiation acts than the MA and CC dyads during the structured tasks. Findings suggest that children with SM may withdraw from their parents during stressful situations, thus missing out on opportunities for learning other coping skills. We discuss the implications of the present findings for understanding the maintenance and treatment of SM.

Comprehensive treatment of temporomandibular joint disorders.

PubMed

Navrátil, Leos; Navratil, Vaclav; Hajkova, Simona; Hlinakova, Petra; Dostalova, Tatjana; Vranová, Jana

2014-01-01

Changing lifestyles, decreasing physical activity, which is increasing the number of degenerative joint diseases of various etiology, and certain dental procedures are increasing the number of patients complaining of pain in their temporomandibular joints. The aim of the study was to assess the benefits of comprehensive physiotherapy sessions in order to decrease the number of temporomandibular joint problems, thereby improving the patient's quality of life. An examination by a dentist determined each patient's treatment plan, which consisted of a medical exam, physical therapy and education. Each form of treatment was applied 10 times at intervals of 7-14 days. The main goal of the therapeutic physical education was to redress the muscle imbalance in the mandibular joint. This was achieved by restoring balance between the masticatory muscles, along with releasing the spastic shrouds found in the masticatory muscles. The aim of education was to teach the patient exercises focused on the temporomandibular joint and masticatory muscles. The intensity of the exercises and their composition were individually adjusted and adapted to their current state. Physical therapy consisted of the application of pulsed magnetic therapy, laser therapy, and non-invasive positive thermotherapy. The above procedure was conducted on a therapeutic group of 24 patients (3 men and 20 women). In the course of therapy, there were no complications, and all patients adhered to the prescribed regime. None reported any side effects. The mean treatment duration was 123 +/- 66 days. The outcome of the therapy was evaluated as described in the methodology, the degree of pain affecting the joint, and the opening ability of the mouth. In both parameters, there was a significant decline in patient pain. In a study devoted to tactics of rehabilitation treatment for temporomandibular joint disorders, the need for comprehensive long-term therapy, involving education, and learning proper chewing habits

The selection of the American-Polish joint venture projects for the Krakow program and results of the efforts to date

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gyorke, D.F.; Butcher, T.A.

1995-12-31

To implement the Krakow Clean Fossil Fuels and Energy Efficiency Program, eight U.S. firms were selected by the U.S. Department of Energy to market their technologies to reduce pollution from low emission sources in Krakow. The eight U.S. firms were selected by a competitive solicitation that required the proposing firms to themselves provide funding to match or exceed the funding provided by the Program. These U.S. firms and their Polish partner companies have begun sales and cooperative work efforts in Krakow, and some have already made initial equipment installations with measurable performance improvements. Following their efforts as part of themore » Program, these U.S.-Polish joint ventures will market their technologies and achieve the associated environmental benefits elsewhere in Poland and Eastern and Central Europe. As part of the Krakow Program a spreadsheet model was developed to compare technological options for supplying heat to the city by calculation and comparing the heating costs and associated emissions reduction for each option. Comparison of options is made on the basis of the user cost-per-metric ton of equivalent emissions reduction. For all options considered in the Krakow Program, this cost parameter has ranged from -$1469 (best) to $2650 (worst). The costs for technologies associated with the eight projects in the Krakow Program are at the lower end of this range placing these technologies among the most cost effective solutions to the pollution problems from the low emission sources.« less

Evaluation of the joint distribution at disease presentation of patients with rheumatoid arthritis: a large study across continents.

PubMed

Bergstra, Sytske Anne; Chopra, Arvind; Saluja, Manjit; Vega-Morales, David; Govind, Nimmisha; Huizinga, Tom W J; van der Helm-van Mil, Annette

2017-01-01

Genetic and environmental risk factors for rheumatoid arthritis (RA) are population dependent and may affect disease expression. Therefore, we studied tender and swollen joint involvement in patients newly diagnosed with RA in four countries and performed a subanalysis within countries to assess whether the influence of autoantibody positivity affected disease expression. Patients with symptom duration <2 years fulfilling the American College of Rheumatology/European League Against Rheumatism 2010 RA classification criteria were selected from METEOR (Measurement of Efficacy of Treatment in the Era of Outcome in Rheumatology), an international observational database, and the Dutch Leiden Early Arthritis Clinic. Indian (n=947), Mexican (n=141), South African (n=164) and Dutch (n=947) autoantibody-positive and negative patients with RA, matched by symptom duration, were studied for swollen and tender joint distribution. Between countries, the reported distribution of swollen joint distribution differed, with more knee synovitis in Mexico, South Africa and India compared with the Netherlands (37%, 36%, 30% and 13%) and more elbow (29%, 23%, 7%, 7%) and shoulder synovitis (21%, 11%, 0%, 1%) in Mexico and South Africa compared with India and the Netherlands.Since the number of autoantibody-negative patients in Mexico and South Africa was limited, Indian and Dutch autoantibody-positive and negative patients with RA were compared. The number of swollen and tender joints was higher in autoantibody-negative patients, but the overall distribution of involved joints was similar. Joint involvement at diagnosis does not differ between autoantibody-positive and negative patients with RA in India and the Netherlands. However, joint involvement is reported differently across countries. More research is needed whether these differences are cultural and/or pathogenetic.

Joint Space Doctrine: Catapulting into the Future

DTIC Science & Technology

1994-01-01

Information dominance will provide the stimulus for the military space program in the near term. Maximizing the capabilities of the information weapon, however, requires formulating joint space doctrine that has broad support and applicability. This doctrine will provide a significant advantage for the United States over those nations which employ space assets in a piecemeal

Fatigue properties of dissimilar metal laser welded lap joints

NASA Astrophysics Data System (ADS)

Dinsley, Christopher Paul

This work involves laser welding austenitic and duplex stainless steel to zinc-coated mild steel, more specifically 1.2mm V1437, which is a Volvo Truck Coiporation rephosphorised mild steel. The work investigates both tensile and lap shear properties of similar and dissimilar metal laser welded butt and lap joints, with the majority of the investigation concentrating on the fatigue properties of dissimilar metal laser welded lap joints. The problems encountered when laser welding zinc-coated steel are addressed and overcome with regard to dissimilar metal lap joints with stainless steel. The result being the production of a set of guidelines for laser welding stainless steel to zinc-coated mild steel. The stages of laser welded lap joint fatigue life are defined and the factors affecting dissimilar metal laser welded lap joint fatigue properties are analysed and determined; the findings suggesting that dissimilar metal lap joint fatigue properties are primarily controlled by the local stress at the internal lap face and the early crack growth rate of the material at the internal lap face. The lap joint rotation, in turn, is controlled by sheet thickness, weld width and interfacial gap. Laser welded lap joint fatigue properties are found to be independent of base material properties, allowing dissimilar metal lap joints to be produced without fatigue failure occurring preferentially in the weaker parent material, irrespective of large base material property differences. The effects of Marangoni flow on the compositions of the laser weld beads are experimentally characterised. The results providing definite proof of the stirring mechanism within the weld pool through the use of speeds maps for chromium and nickel. Keywords: Laser welding, dissimilar metal, Zinc-coated mild steel, Austenitic stainless steel, Duplex stainless steel, Fatigue, Lap joint rotation, Automotive.

A parametric shell analysis of the shuttle 51-L SRB AFT field joint

NASA Technical Reports Server (NTRS)

Davis, Randall C.; Bowman, Lynn M.; Hughes, Robert M., IV; Jackson, Brian J.

1990-01-01

Following the Shuttle 51-L accident, an investigation was conducted to determine the cause of the failure. Investigators at the Langley Research Center focused attention on the structural behavior of the field joints with O-ring seals in the steel solid rocket booster (SRB) cases. The shell-of-revolution computer program BOSOR4 was used to model the aft field joint of the solid rocket booster case. The shell model consisted of the SRB wall and joint geometry present during the Shuttle 51-L flight. A parametric study of the joint was performed on the geometry, including joint clearances, contact between the joint components, and on the loads, induced and applied. In addition combinations of geometry and loads were evaluated. The analytical results from the parametric study showed that contact between the joint components was a primary contributor to allowing hot gases to blow by the O-rings. Based upon understanding the original joint behavior, various proposed joint modifications are shown and analyzed in order to provide additional insight and information. Finally, experimental results from a hydro-static pressurization of a test rocket booster case to study joint motion are presented and verified analytically.

Involving Latino Parents.

ERIC Educational Resources Information Center

Quezada, Reyes L.; Diaz, Delia M.; Sanchez, Maria

2003-01-01

Describes barriers to Latino parent involvement in educational activities, factors to consider when involving Latino parents, and two examples of Latino involvement programs in California: Family Literacy Workshop at James Monroe Elementary School, Madera Unified School District, and Parents Take P.A.R.T. (Parent Assisted Reading Training) at…

Bonded composite to metal scarf joint performance in an aircraft landing gear drag strut. [for Boeing 747 aircraft

NASA Technical Reports Server (NTRS)

Howell, W. E.

1974-01-01

The structural performance of a boron-epoxy reinforced titanium drag strut, which contains a bonded scarf joint and was designed to the criteria of the Boeing 747 transport, was evaluated. An experimental and analytical investigation was conducted. The strut was exposed to two lifetimes of spectrum loading and was statically loaded to the tensile and compressive design ultimate loads. Throughout the test program no evidence of any damage in the drag strut was detected by strain gage measurements, ultrasonic inspection, or visual observation. An analytical study of the bonded joint was made using the NASA structural analysis computer program NASTRAN. A comparison of the strains predicted by the NASTRAN computer program with the experimentally determined values shows excellent agreement. The NASTRAN computer program is a viable tool for studying, in detail, the stresses and strains induced in a bonded joint.

The academic differences between students involved in school-based robotics programs and students not involved in school-based robotics programs

NASA Astrophysics Data System (ADS)

Koumoullos, Michael

This research study aimed to identify any correlation between participation in afterschool robotics at the high school level and academic performance. Through a sample of N=121 students, the researcher examined the grades and attendance of students who participated in a robotics program in the 2011-2012 school year. The academic record of these students was compared to a group of students who were members of school based sports teams and to a group of students who were not part of either of the first two groups. Academic record was defined as overall GPA, English grade, mathematics grade, mathematics-based standardized state exam scores, and attendance rates. All of the participants of this study were students in a large, urban career and technical education high school. As STEM (Science, Technology, Engineering, and Mathematics) has come to the forefront of educational focus, robotics programs have grown in quantity. Starting robotics programs requires a serious commitment of time, money, and other resources. The benefits of such programs have not been well analyzed. This research study had three major goals: to identify the academic characteristics of students who are drawn to robotics programs, to identify the academic impact of the robotics program during the robotics season, and to identify the academic impact of the robotics program at the end of the school year. The study was a non-experiment. The researchers ran MANOVS, repeated measures analyses, an ANOVA, and descriptive statistics to analyze the data. The data showed that students drawn to robotics were academically stronger than students who did not participate in robotics. The data also showed that grades and attendance did not significantly improve or degrade either during the robotics season or at year-end. These findings are significant because they show that robotics programs attract students who are academically strong. This information can be very useful in high school articulation programs

Influence of clamp-up force on the strength of bolted composite joints

NASA Astrophysics Data System (ADS)

Horn, Walter J.; Schmitt, Ron R.

1994-03-01

Composite materials offer the potential for a reduction in the number of individual parts and joints in a structure because large one-piece components can replace multipart assemblies. Nevertheless, there are many situations where composite parts must be joined and often mechanical fasteners provide the only practical method of joining those parts. The long-term strength of mechanically fastened joints of composite members can be directly affected by the clamp-up force of the fastener and thus perhaps by the relaxation of this force due to the viscoelastic character of the composite materials of the joint. Methods for predicting the effect of bolt clamp-up force relaxation on the strength of mechanically fastened joints of thermoplastic composite materials were investigated during the present study. A test program, using two thermoplastic composite materials, was conducted to determine the influence of clamp-up force on joint strength, to measure the relaxation of the joint clamp-up force with time, and to measure the change of joint strength as a function of time.

[Burning mouth syndrome - a joint biopsychosocial approach].

PubMed

Arpone, Francesca; Combremont, Florian; Weber, Kerstin; Scolozzi, Paolo

2016-02-10

Burning mouth syndrome (BMS) is a medical condition that is often refractory to conventional diagnostic and therapeutic methods. Patients suffering from BMS can benefit from a biopsychosocial approach in a joint, medical-psychological consultation model. Such a consultation exists at Geneva University Hospitals, involving the collaboration of the maxillo-facial and oral surgery division and the division of liaison psychiatry and crisis intervention, in order to take into account the multiple factors involved in BMS onset and persistence. This article will describe BMS clinical presentation, and present an integrate approach to treat these patients.

Radiation dose in temporomandibular joint zonography

DOE Office of Scientific and Technical Information (OSTI.GOV)

Coucke, M.E.; Bourgoignie, R.R.; Dermaut, L.R.

1991-06-01

Temporomandibular joint morphology and function can be evaluated by panoramic zonography. Thermoluminescent dosimetry was applied to evaluate the radiation dose to predetermined sites on a phantom eye, thyroid, pituitary, and parotid, and the dose distribution on the skin of the head and neck when the TMJ program of the Zonarc panoramic x-ray unit was used. Findings are discussed with reference to similar radiographic techniques.

Establishment of joint attention in dyads involving hearing mothers of deaf and hearing children, and its relation to adaptive social behavior.

PubMed

Nowakowski, Matilda E; Tasker, Susan L; Schmidt, Louis A

2009-01-01

Mounting evidence points to joint attention as a mediating variable in children's adaptive behavior development. Joint attention in interactions between hearing mothers and congenitally deaf (n = 27) and hearing (n = 29) children, ages 18-36 months, was examined. All deaf children had severe to profound hearing loss. Mother-child interactions were coded for maternally initiated and child-initiated success rates in establishing joint attention; mothers completed ratings of their children's adaptive behavior. Hearing mother-deaf child dyads had significantly lower maternally initiated success rates. No significant between-group differences on child-initiated success rates were shown. Maternal ratings of adaptive behavior were significantly lower for deaf children, and related positively and significantly to both child-initiated and maternally initiated success rates. The findings suggest that mother-child interactions that are low in successful establishment of joint attention might mediate the development of socioemotional problems evident in deaf children with hearing families.

Periprosthetic joint infection: are patients with multiple prosthetic joints at risk?

PubMed

Jafari, S Mehdi; Casper, David S; Restrepo, Camilo; Zmistowski, Benjamin; Parvizi, Javad; Sharkey, Peter F

2012-06-01

Patients who present with a periprosthetic joint infection in a single joint may have multiple prosthetic joints. The risk of these patients developing a subsequent infection in another prosthetic joint is unknown. Our purposes were (1) to identify the risk of developing a subsequent infection in another prosthetic joint and (2) to describe the time span and organism profile to the second prosthetic infection. We retrospectively identified 55 patients with periprosthetic joint infection who had another prosthetic joint in place at the time of presentation. Of the 55 patients, 11 (20%) developed a periprosthetic joint infection in a second joint. The type of organism was the same as the first infection in 4 (36%) of 11 patients. The time to developing a second infection averaged 2.0 years (range, 0-6.9 years). Copyright © 2012 Elsevier Inc. All rights reserved.

The Joint Damping Experiment (JDX)

NASA Technical Reports Server (NTRS)

Folkman, Steven L.; Bingham, Jeff G.; Crookston, Jess R.; Dutson, Joseph D.; Ferney, Brook D.; Ferney, Greg D.; Rowsell, Edwin A.

1997-01-01

The Joint Damping Experiment (JDX), flown on the Shuttle STS-69 Mission, is designed to measure the influence of gravity on the structural damping of a high precision three bay truss. Principal objectives are: (1) Measure vibration damping of a small-scale, pinjointed truss to determine how pin gaps give rise to gravity-dependent damping rates; (2) Evaluate the applicability of ground and low-g aircraft tests for predicting on-orbit behavior; and (3) Evaluate the ability of current nonlinear finite element codes to model the dynamic behavior of the truss. Damping of the truss was inferred from 'Twang' tests that involve plucking the truss structure and recording the decay of the oscillations. Results are summarized as follows. (1) Damping, rates can change by a factor of 3 to 8 through changing the truss orientation; (2) The addition of a few pinned joints to a truss structure can increase the damping by a factor as high as 30; (3) Damping is amplitude dependent; (4) As gravity induced preloads become large (truss long axis perpendicular to gravity vector) the damping is similar to non-pinjointed truss; (5) Impacting in joints drives higher modes in structure; (6) The torsion mode disappears if gravity induced preloads are low.

[The temporomandibular joint and inflammatory rheumatic diseases].

PubMed

Marotte, H

2016-09-01

Some inflammatory rheumatic diseases can involve the temporomandibular joint, such as rheumatoid arthritis and spondylarthritis. The aim of our work was to evaluate the current prevalence of these inflammatory TMJ diseases, to indicate the new therapeutics and to describe the collaboration between rheumatologist and maxillofacial surgeon in these pathologies. Copyright © 2016 Elsevier Masson SAS. All rights reserved.

Getting Involved with the Discovery Program

NASA Technical Reports Server (NTRS)

Asplund, Shari

2000-01-01

NASA's Discovery Program represents the implementation of NASA Administrator Daniel Goldin's vision of 'faster, better, cheaper' planetary missions; encompasses a series of low-cost solar system exploration missions intended to accomplish high quality, focused planetary science investigations using innovative, streamlined, and efficient approaches to assure the highest science value for the cost; and aims to enhance our understanding of the solar system by exploring the planets, their moons and other small bodies, either by traveling to them or remotely from the vicinity of Earth. The objectives of this program include the following: (1) Provide exciting and important scientific data to the global community; (2) Pursue new and innovative ways of doing business; (3) Encourage technological development by designing and testing new technologies and transferring them to the private sector; (4) Increase public awareness of, and appreciation for, solar system exploration through exciting education and public outreach activities; (5) Support national education initiatives through mission-specific programs; and (6) Ensure participation of small disadvantaged businesses, women-owned businesses, HBCUs, and other minority educational institutions in procurements.

Space Suit Joint Torque Testing

NASA Technical Reports Server (NTRS)

Valish, Dana J.

2011-01-01

In 2009 and early 2010, a test was performed to quantify the torque required to manipulate joints in several existing operational and prototype space suits in an effort to develop joint torque requirements appropriate for a new Constellation Program space suit system. The same test method was levied on the Constellation space suit contractors to verify that their suit design meets the requirements. However, because the original test was set up and conducted by a single test operator there was some question as to whether this method was repeatable enough to be considered a standard verification method for Constellation or other future space suits. In order to validate the method itself, a representative subset of the previous test was repeated, using the same information that would be available to space suit contractors, but set up and conducted by someone not familiar with the previous test. The resultant data was compared using graphical and statistical analysis and a variance in torque values for some of the tested joints was apparent. Potential variables that could have affected the data were identified and re-testing was conducted in an attempt to eliminate these variables. The results of the retest will be used to determine if further testing and modification is necessary before the method can be validated.

Cadre Photos for Joint Test Team Feature

NASA Image and Video Library

2017-02-23

During a tour of SpaceX headquarters in Hawthorne, California, commercial crew astronauts Suni Williams, left, and Doug Hurley participate in joint test team training using mockup components of the Crew Dragon on Feb. 23, 2017. Crew Dragon is being developed and manufactured in partnership with NASA's Commercial Crew Program to return human spaceflight capabilities to the U.S.

Cadre Photos for Joint Test Team Feature

NASA Image and Video Library

2017-02-23

During a tour of SpaceX headquarters in Hawthorne, California, commercial crew astronauts Bob Behnken, left, and Eric Boe participate in joint test team training using mockup components of the Crew Dragon on Feb. 23, 2017. Crew Dragon is being developed and manufactured in partnership with NASA's Commercial Crew Program to return human spaceflight capabilities to the U.S.

Thermomechanical treatment of welded joints of aluminum-lithium alloys modified by scandium

NASA Astrophysics Data System (ADS)

Malikov, A. G.

2017-12-01

At present, the aeronautical equipment manufacture involves up-to-date high-strength aluminum alloys of decreased density resulting from the lithium admixture. Various technologies of fusible welding of these alloys are being developed. The paper presents experimental investigations of the optimization of the laser welding of aluminum alloys with the scandium-modified welded joint after thermomechanical treatment. The effect of scandium on the micro- and macrostructure is studied along with strength characteristics of the welded joint. It is found that thermomechanical treatment allows us to obtain the strength of the welded joint 0.89 for the Al-Mg-Li system and 0.99 for the Al-Cu-Li system with the welded joint modified by scandium in comparison with the base alloy after treatment.

LTPP pavement maintenance materials : SHRP joint reseal experiment, final report.

DOT National Transportation Integrated Search

1999-09-01

The Strategic Highway Research Program (SHRP) H-106 maintenance experiment and the Federal Highway : Administration (FHWA) Long-Term Monitoring (LTM) of Pavement Maintenance Materials Test Sites project studied : the resealing of joints in concrete p...

The Influence of the Heat-Affected Zone Mechanical Properties on the Behaviour of the Welding in Transverse Plate-to-Tube Joints.

PubMed

Lozano, Miguel; Serrano, Miguel A; López-Colina, Carlos; Gayarre, Fernando L; Suárez, Jesús

2018-02-09

Eurocode 3 establishes the component method to analytically characterize the structural joints between beam and columns. When one of the members involved in the joint is a hollow section (i.e., a tube) there is a lack of information for the specific components present in the joint. There are two different ways to bridge the gap: experimental testing on the actual beam column joints involving tubular sections; or numerical modelization, typically by means of finite element analysis. For this second option, it is necessary to know the actual mechanical properties of the material. As long as the joint implies a welding process, there is a concern related to how the mechanical properties in the heat-affected zone (HAZ) influence the behavior of the joint. In this work, some coupons were extracted from the HAZ of the beam-column joint. The coupons were tested and the results were implemented in the numerical model of the joint, in an attempt to bring it closer to the experimental results of the tested joints.

Ethical Challenges Scenario: Youth Involvement in Evaluation

ERIC Educational Resources Information Center

Cooksy, Leslie J.

2007-01-01

All evaluators face the challenge of striving to adhere to the highest possible standards of ethical conduct. Translating the AEA's Guiding Principles and the Joint Committee's Program Evaluation Standards into everyday practice, however, can be a complex, uncertain, and frustrating endeavor. Moreover, acting in an ethical fashion can require…

Impact extractive fracture of jointed steel plates of a bolted joint

NASA Astrophysics Data System (ADS)

Daimaruya, M.; Fujiki, H.; Ambarita, H.

2012-08-01

This study is concerned with the development of a fracture criterion for the impact fracture of jointed steel plates of a bolted joint used in a car body. For the accurate prediction of crash characteristics of car bodies by computer-aided engineering (CAE), it is also necessary to examine the behavior and fracture of jointed steel plates subjected to impact loads. Although the actual impact fracture of jointed steel plates of a bolted joint used in cars is complicated, for simplifying the problem it might be classified into the shear fracture and the extractive fracture of jointed steel plates. Attention is given to the extractive fracture of jointed steel plates in this study. The extractive behavior and fracture of three kinds of steel plates used for cars are examined in experiments and numerical simulations. The impact extraction test of steel plates jointed by a bolt is performed using the one-bar method, together with the static test. In order to understand the mechanism of extractive fracture process of jointed steel plates, numerical simulations by a FEM code LS-DYNA are also carried out. The obtained results suggest that a stress-based fracture criterion may be developed for the impact extractive fracture of jointed steel plates of a bolted joint used in a car body.

Automatic Quantification of Radiographic Wrist Joint Space Width of Patients With Rheumatoid Arthritis.

PubMed

Huo, Yinghe; Vincken, Koen L; van der Heijde, Desiree; de Hair, Maria J H; Lafeber, Floris P; Viergever, Max A

2017-11-01

Objective: Wrist joint space narrowing is a main radiographic outcome of rheumatoid arthritis (RA). Yet, automatic radiographic wrist joint space width (JSW) quantification for RA patients has not been widely investigated. The aim of this paper is to present an automatic method to quantify the JSW of three wrist joints that are least affected by bone overlapping and are frequently involved in RA. These joints are located around the scaphoid bone, viz. the multangular-navicular, capitate-navicular-lunate, and radiocarpal joints. Methods: The joint space around the scaphoid bone is detected by using consecutive searches of separate path segments, where each segment location aids in constraining the subsequent one. For joint margin delineation, first the boundary not affected by X-ray projection is extracted, followed by a backtrace process to obtain the actual joint margin. The accuracy of the quantified JSW is evaluated by comparison with the manually obtained ground truth. Results: Two of the 50 radiographs used for evaluation of the method did not yield a correct path through all three wrist joints. The delineated joint margins of the remaining 48 radiographs were used for JSW quantification. It was found that 90% of the joints had a JSW deviating less than 20% from the mean JSW of manual indications, with the mean JSW error less than 10%. Conclusion: The proposed method is able to automatically quantify the JSW of radiographic wrist joints reliably. The proposed method may aid clinical researchers to study the progression of wrist joint damage in RA studies. Objective: Wrist joint space narrowing is a main radiographic outcome of rheumatoid arthritis (RA). Yet, automatic radiographic wrist joint space width (JSW) quantification for RA patients has not been widely investigated. The aim of this paper is to present an automatic method to quantify the JSW of three wrist joints that are least affected by bone overlapping and are frequently involved in RA. These joints

A novel flight surgeon training model at a joint military and civilian surgical residency program.

PubMed

DeSoucy, Erik S; Zakaluzny, Scott A; Galante, Joseph M

2017-07-01

Graduating military preliminary interns are often required to fill flight surgeon billets. General surgery preliminary interns get experience evaluating surgical and trauma patients, but receive very little training in primary care and flight medicine. At a joint military and civilian training program, we developed a supplemental curriculum to help transition our interns into flight medicine. From 2013 to 2016, we developed a lecture series focused on aerospace medicine, primary care, and specialty topics including dermatology, ophthalmology, orthopedics, pediatrics, psychiatry, and women's health. During the 2016 iteration attended by 10 interns, pre- and post-participation 10-item Likert scale surveys were administered. Questions focused on perceived preparedness for primary care role and overall enthusiasm for flight medicine. Open-ended surveys from 2013 to 2016 were also used to gauge the effect of the curriculum. The composite number of agreement responses (indicating increased comfort with presented material) increased 63% after course completion. Disagreement responses and neutral responses decreased 78% and 30%, respectively. Open-ended surveys from 14 participants showed an overall positive impression of the curriculum with all indicating it aided their transition to flight medicine. Survey responses indicate an overall perceived benefit from participation in the curriculum with more confidence in primary care topics and improved transition to a flight medicine tour. This model for supplemental aerospace medicine and primary care didactics should be integrated into any residency program responsible for training military preliminary interns who may serve as flight surgeons. Published by Elsevier Inc.

High Energy Laser Joint Technology Office: a mission overview

NASA Astrophysics Data System (ADS)

Seeley, Don D.; Slater, John M.

2004-10-01

The High Energy Laser Joint Technology Office (HEL-JTO) was established in 2000 for the purpose of developing and executing a comprehensive investment strategy for HEL science and technology that would underpin weapons development. The JTO is currently sponsoring 80 programs across industry, academia, and government agencies with a budget of approximately $60 million. The competitively awarded programs are chosen to advance the current state of the art in HEL technology and fill technology gaps, thus providing a broad capability that can be harvested in acquisition programs by the military services.

A goal programming approach for a joint design of macroeconomic and environmental policies: a methodological proposal and an application to the Spanish economy.

PubMed

André, Francisco J; Cardenete, M Alejandro; Romero, Carlos

2009-05-01

The economic policy needs to pay increasingly more attention to the environmental issues, which requires the development of methodologies able to incorporate environmental, as well as macroeconomic, goals in the design of public policies. Starting from this observation, this article proposes a methodology based upon a Simonian satisficing logic made operational with the help of goal programming (GP) models, to address the joint design of macroeconomic and environmental policies. The methodology is applied to the Spanish economy, where a joint policy is elicited, taking into consideration macroeconomic goals (economic growth, inflation, unemployment, public deficit) and environmental goals (CO(2), NO( x ) and SO( x ) emissions) within the context of a computable general equilibrium model. The results show how the government can "fine-tune" its policy according to different criteria using GP models. The resulting policies aggregate the environmental and the economic goals in different ways: maximum aggregate performance, maximum balance and a lexicographic hierarchy of the goals.

7 CFR 1940.331 - Public involvement.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 7 Agriculture 13 2011-01-01 2009-01-01 true Public involvement. 1940.331 Section 1940.331...) PROGRAM REGULATIONS (CONTINUED) GENERAL Environmental Program § 1940.331 Public involvement. (a) Objective. The basic objective of FmHA or its successor agency under Public Law 103-354's public involvement...

7 CFR 1940.331 - Public involvement.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 7 Agriculture 13 2010-01-01 2009-01-01 true Public involvement. 1940.331 Section 1940.331...) PROGRAM REGULATIONS (CONTINUED) GENERAL Environmental Program § 1940.331 Public involvement. (a) Objective. The basic objective of FmHA or its successor agency under Public Law 103-354's public involvement...

US/Brazil joint pilot project objectives

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

1997-12-01

This paper describes a joint US/Brazil pilot project for rural electrification, whose major goals are: to establish technical, institutional, and economic confidence in using renewable energy (PV and wind) to meet the needs of the citizens of rural Brazil; to establish on-going institutional, individual and business relationships necessary to implement sustainable programs and commitments; to lay the groundwork for larger scale rural electrification through the use of distributed renewable technologies. The projects have supported low power home lighting systems, lighting and refrigeration for schools and medical centers, and water pumping systems. This is viewed as a long term project, wheremore » much of the equipment will come from the US, but Brazil will be responsible for program management, and sharing data gained from the program. The paper describes in detail the Brazilian program which was instituted to support this phased project.« less

Interprofessional approach for teaching functional knee joint anatomy.

PubMed

Meyer, Jakob J; Obmann, Markus M; Gießler, Marianne; Schuldis, Dominik; Brückner, Ann-Kathrin; Strohm, Peter C; Sandeck, Florian; Spittau, Björn

2017-03-01

Profound knowledge in functional and clinical anatomy is a prerequisite for efficient diagnosis in medical practice. However, anatomy teaching does not always consider functional and clinical aspects. Here we introduce a new interprofessional approach to effectively teach the anatomy of the knee joint. The presented teaching approach involves anatomists, orthopaedists and physical therapists to teach anatomy of the knee joint in small groups under functional and clinical aspects. The knee joint courses were implemented during early stages of the medical curriculum and medical students were grouped with students of physical therapy to sensitize students to the importance of interprofessional work. Evaluation results clearly demonstrate that medical students and physical therapy students appreciated this teaching approach. First evaluations of following curricular anatomy exams suggest a benefit of course participants in knee-related multiple choice questions. Together, the interprofessional approach presented here proves to be a suitable approach to teach functional and clinical anatomy of the knee joint and further trains interprofessional work between prospective physicians and physical therapists as a basis for successful healthcare management. Copyright © 2016 The Authors. Published by Elsevier GmbH.. All rights reserved.

Learning while Earning: Worksite Literacy Programs. Foresight: Model Programs for Economic Development.

ERIC Educational Resources Information Center

Rosenfeld, Stuart A.; And Others

This paper describes four successful and innovative workplace-based literacy programs in the South. The first is a joint program for city municipal workers between the U.S. Naval Air Station in Memphis, Tennessee and the Memphis Literacy Coalition (Project Literacy-Memphis, Inc.). The second is a program at North Carolina State University in…

Critical Joints in Large Composite Primary Aircraft Structures. Volume 3: Ancillary Test Results

NASA Technical Reports Server (NTRS)

Bunin, Bruce L.; Sagui, R. L.

1985-01-01

A program was conducted to develop the technology for critical structural joints for composite wing structure that meets all the design requirements of a 1990 commercial transport aircraft. The results of a comprehensive ancillary test program are summarized, consisting of single-bolt composite joint specimens tested in a variety of configurations. These tests were conducted to characterize the strength and load deflection properties that are required for multirow joint analysis. The composite material was Toray 300 fiber and Ciba-Geigy 914 resin, in the form of 0.005 and 0.01 inch thick unidirectional tape. Tests were conducted in single and double shear for loaded and unloaded hole configurations under both tensile and compressive loading. Two different layup patterns were examined. All tests were conducted at room temperature. In addition, the results of NASA Standard Toughness Test (NASA RP 1092) are reported, which were conducted for several material systems.

An Examination of Reading Skills and Reading Outcomes for Youth Involved in a Crime Prevention Program

ERIC Educational Resources Information Center

Metsala, Jamie L.; David, Margaret D.; Brown, Sarah

2017-01-01

This study examined the incidence of reading impairments, the reading profiles, and the outcomes of a reading intervention for youth involved in a comprehensive crime prevention program. Rates of reading impairments were between 55% and 61%. Reading profiles for participants with reading comprehension impairments showed deficits in phonological…

Joint Instability and Osteoarthritis

PubMed Central

Blalock, Darryl; Miller, Andrew; Tilley, Michael; Wang, Jinxi

2015-01-01

Joint instability creates a clinical and economic burden in the health care system. Injuries and disorders that directly damage the joint structure or lead to joint instability are highly associated with osteoarthritis (OA). Thus, understanding the physiology of joint stability and the mechanisms of joint instability-induced OA is of clinical significance. The first section of this review discusses the structure and function of major joint tissues, including periarticular muscles, which play a significant role in joint stability. Because the knee, ankle, and shoulder joints demonstrate a high incidence of ligament injury and joint instability, the second section summarizes the mechanisms of ligament injury-associated joint instability of these joints. The final section highlights the recent advances in the understanding of the mechanical and biological mechanisms of joint instability-induced OA. These advances may lead to new opportunities for clinical intervention in the prevention and early treatment of OA. PMID:25741184

Joint instability and osteoarthritis.

PubMed

Blalock, Darryl; Miller, Andrew; Tilley, Michael; Wang, Jinxi

2015-01-01

Joint instability creates a clinical and economic burden in the health care system. Injuries and disorders that directly damage the joint structure or lead to joint instability are highly associated with osteoarthritis (OA). Thus, understanding the physiology of joint stability and the mechanisms of joint instability-induced OA is of clinical significance. The first section of this review discusses the structure and function of major joint tissues, including periarticular muscles, which play a significant role in joint stability. Because the knee, ankle, and shoulder joints demonstrate a high incidence of ligament injury and joint instability, the second section summarizes the mechanisms of ligament injury-associated joint instability of these joints. The final section highlights the recent advances in the understanding of the mechanical and biological mechanisms of joint instability-induced OA. These advances may lead to new opportunities for clinical intervention in the prevention and early treatment of OA.

Self-Referenced Processing, Neurodevelopment and Joint Attention in Autism

ERIC Educational Resources Information Center

Mundy, Peter; Gwaltney, Mary; Henderson, Heather

2010-01-01

This article describes a parallel and distributed processing model (PDPM) of joint attention, self-referenced processing and autism. According to this model, autism involves early impairments in the capacity for rapid, integrated processing of self-referenced (proprioceptive and interoceptive) and other-referenced (exteroceptive) information.…

The metatarsosesamoid joint: an in vitro 3D quantitative assessment.

PubMed

Jamal, Bilal; Pillai, Anand; Fogg, Quentin; Kumar, Senthil

2015-03-01

The anatomy of the first metatarsophalangeal (MTP) joint, particularly the metatarsosesamoid articulation, remains poorly understood. Our goal was to quantitatively define the excursion of the sesamoids. Seven cadavers were dissected to assess the articulating surfaces throughout a normal range of motion. The dissections were digitally reconstructed in various positions using a MicroScribe. For first MTP joint, excursion averaged 14.7mm for the tibial sesamoid in the sagittal plane and 7.5mm for the fibular sesamoid. The sesamoids also moved medially to laterally when the joint was dorsiflexed. For the maximally dorsiflexed joint, excursion averaged 2.8mm for the tibial sesamoid and 3.5mm for the fibular sesamoid. Hallucal sesamoids appear to have differential tracking: the tibial sesamoid has greater longitudinal excursion; the fibular sesamoid has greater lateral excursion. The anatomical data will interest those involved with the design of an effective hallux arthroplasty. Copyright © 2014 European Foot and Ankle Society. Published by Elsevier Ltd. All rights reserved.

[Trigeminal motor paralysis and dislocation of the temporo-mandibular joints].

PubMed

Ohkawa, S; Yoshida, T; Ohsumi, Y; Tabuchi, M

1996-07-01

A 64-year-old woman with diabetes mellitus was admitted to our hospital with left hemiparesis of sudden onset. A brain MRI demonstrated a cerebral infarction in the ventral part of the right lower pons. When left hemiparesis worsened, she had dislocation of the temporo-mandibular joints repeatedly. Then, her lower jaw deviated to the right when she opened her mouth. Also, there was decreased contraction of the right masseter when she clenched her teeth. These findings suggest that there was trigeminal motor paralysis on the right side resulting from involvement of the intrapontine trigeminal motor nerve. She has no history of dislocation of the temporo-mandibular joints. An X-ray film showed that the temporo-mandibular joints were intact. Thus, it is possible that deviation of the lower jaw was the cause of this dislocation. We suspect that dislocation of the temporo-mandibular joints may occur as a complication of unilateral trigeminal motor paralysis. This has not been reported to our knowledge.

Parent Involvement Affects Children's Cognitive Growth.

ERIC Educational Resources Information Center

Irvine, David J.; And Others

As part of a longitudinal study of the New York State Experimental Prekindergarten Program, the effect of degree of parental involvement in the program on children's cognitive development was examined. Parent involvement included employment in the program, school visits, home visits by school personnel, group meetings, and incidental contacts such…

Workshop Report: Joint Requirements. Oversight Council Process.

DTIC Science & Technology

1996-02-28

provides media for professional exchange and peer criticism among students, theoreticians, practitioners, and users of military operations research. These... exchange of ideas and methods. involvement in the annual Joint Warfare Inter- Subsequent efforts could include multiple operability Demonstrations (JWID...forums for exchange of ideas at the working level, clear, visible relations but studies and analysis opportunities as well. between the JWCAs need to

Command and Control for Joint Air Operations.

DTIC Science & Technology

1994-11-14

publication apply to the throughout the range of military commanders of combatant commands, operations. subunified commands, joint task forces, and...this doctrine (or operations as well as the doctrinal basis JTTP) will be followed except when, in for US military involvement in the judgment of the...commander, multinational and interagency operations. exceptional circumstances dictate It provides military guidance for the otherwise. If conflicts

Psychological Evaluation of Animal-assisted Intervention (AAI) Programs Involving Visiting Dogs and Cats for Alcohol Dependents: A Pilot Study.

PubMed

Ohtani, Nobuyo; Narita, Shin; Yoshihara, Eiji; Ohta, Mitsuaki; Iwahashi, Kazuhiko

2015-12-01

The purpose of this study was to develop an evaluation method for animal-assisted intervention (AAI) programs involving Mood Check List-Short form.2 (MCL-S.2) and the State-Trait Anxiety Inventory (STAI) for psychiatric daycare of Japanese alcohol. dependents. A total of 36 alcohol dependents completed the study and questionnaires assessing their state. A single session of AAI reduced both subjective and physiological measures of state anxiety (A-State); and this program induced a significant reduction in the anxiety after an AAI program session with the dogs and cats involved in the intervention (p = 0.001). The Wilcoxon t-test showed that there were also significant differences in the "anxiety", "pleasantness", and "relaxation". scores for MCL-S.2 among the alcohol dependents, before and after AAI; a significantly decreased "anxiety" score (p = 0.006), and increased "pleasantness" (p = 0.002) and "relaxation" (p=0.012) scores for MCL-S.2 after AAI. The results of this study indicated that alcohol dependents who experienced a group AAI session-program exhibited significant improvements in their feeling; decreased anxiety, and increased pleasantness and relaxation.

Joint and fascial chronic graft-vs-host disease: correlations with clinical and laboratory parameters

PubMed Central

Vukić, Tamara; Smith, Sean Robinson; Ljubas Kelečić, Dina; Desnica, Lana; Prenc, Ema; Pulanić, Dražen; Vrhovac, Radovan; Nemet, Damir; Pavletic, Steven Z.

2016-01-01

Aim To determine if there are correlations between joint and fascial chronic graft-vs-host disease (cGVHD) with clinical findings, laboratory parameters, and measures of functional capacity. Methods 29 patients were diagnosed with cGVHD based on National Institutes of Health (NIH) Consensus Criteria at the University Hospital Centre Zagreb from October 2013 to October 2015. Physical examination, including functional measures such as 2-minute walk test and hand grip strength, as well as laboratory tests were performed. The relationship between these evaluations and the severity of joint and fascial cGVHD was tested by logistical regression analysis. Results 12 of 29 patients (41.3%) had joint and fascial cGVHD diagnosed according to NIH Consensus Criteria. There was a significant positive correlation of joint and fascial cGVHD and skin cGVHD (P < 0.001), serum C3 complement level (P = 0.045), and leukocytes (P = 0.032). There was a significant negative correlation between 2-minute walk test (P = 0.016), percentage of cytotoxic T cells CD3+/CD8+ (P = 0.022), serum albumin (P = 0.047), and Karnofsky score (P < 0.001). Binary logistic regression model found that a significant predictor for joint and fascial cGVHD was cGVHD skin involvement (odds ratio, 7.79; 95 confidence interval 1.87-32.56; P = 0.005). Conclusion Joint and fascial cGVHD manifestations correlated with multiple laboratory measurements, clinical features, and cGVHD skin involvement, which was a significant predictor for joint and fascial cGVHD. PMID:27374828

Forebody/Inlet of the Joint Strike Fighter Tested at Low Speeds

NASA Technical Reports Server (NTRS)

Johns, Albert L.

1998-01-01

As part of a national cooperative effort to develop a multinational fighter aircraft, a model of a Joint Strike Fighter concept was tested in several NASA Lewis Research Center wind tunnels at low speeds over a range of headwind velocities and model attitudes. This Joint Strike Fighter concept, which is scheduled to go into production in 2005, will greatly improve the range, capability, maneuverability, and survivability of fighter aircraft, and the production program could ultimately be worth $100 billion. The test program was a team effort between Lewis and Lockheed Martin Tactical Aircraft Systems. Testing was completed in September 1997, several weeks ahead of schedule, allowing Lockheed additional time to review the results and analysis data before the next test and resulting in significant cost savings for Lockheed. Several major milestones related to dynamic and steady-state data acquisition and overall model performance were reached during this model test. Results from this program will contribute to both the concept demonstration phase and the production aircraft.

Joint Rhythmic Movement Increases 4-Year-Old Children's Prosocial Sharing and Fairness Toward Peers.

PubMed

Rabinowitch, Tal-Chen; Meltzoff, Andrew N

2017-01-01

The allocation of resources to a peer partner is a prosocial act that is of fundamental importance. Joint rhythmic movement, such as occurs during musical interaction, can induce positive social experiences, which may play a role in developing and enhancing young children's prosocial skills. Here, we investigated whether joint rhythmic movement, free of musical context, increases 4-year-olds' sharing and sense of fairness in a resource allocation task involving peers. We developed a precise procedure for administering joint synchronous experience, joint asynchronous experience, and a baseline control involving no treatment. Then we tested how participants allocated resources between self and peer. We found an increase in the generous allocation of resources to peers following both synchronous and asynchronous movement compared to no treatment. At a more theoretical level, this result is considered in relation to previous work testing other aspects of child prosociality, for example, peer cooperation, which can be distinguished from judgments of fairness in resource allocation tasks. We draw a conceptual distinction between two types of prosocial behavior: resource allocation (an other-directed individual behavior) and cooperation (a goal-directed collaborative endeavor). Our results highlight how rhythmic interactions, which are prominent in joint musical engagements and synchronized activity, influence prosocial behavior between preschool peers.

Perceptions and misconceptions regarding the Joint Commission's view of quality monitoring.

PubMed

Patterson, C H

1989-10-01

The Joint Commission recently has revised its hospital standards for infection control to reflect more accurately current state-of-the-art practices. In addition, the Joint Commission's Agenda for Change initiatives include the development of clinical indicators; one of the topics that will be included in those clinical indicator sets will be infection control. How the hospital chooses to organize itself to conduct the historically required monitoring and evaluation of clinical patient care currently required by the standards of the Joint Commission is at the option of the hospital. How the hospital will organize and collect data specific to infection control indicators yet to be developed by the Joint Commission has not been determined and will not be defined until specific research and development projects are completed. The hospital is expected to have in place infection prevention, surveillance, and control programs; it also is expected to have in place a quality assurance program that focuses not only on solving identified problems but also on the improvement of patient care quality. How the hospitals organize and/or integrate these activities is also at its option. It is expected that qualified professionals will direct and enforce infection prevention, surveillance, and control practices; indicators for infection control can provide data that will help assess the relative success of those practices and activities. The Joint Commission is not developing the capability to judge, on its own part, the actual quality of care provided by an organization seeking accreditation. Rather, the Joint Commission is committed to developing more accurate means to evaluate the structures, processes, and outcomes of diagnosis and treatment activities, as well as their interrelationships. Clinical excellence is supported by quality in the organizational environment and the managerial and leadership contexts within which patient care is delivered. Both clinical and

Anterior fracture dislocation of the sacroiliac joint: A case report and literature review.

PubMed

Xiao, Jianlin; Wang, Yang; Zhang, Minglei; Jiang, Rui; Zhu, Tongtong; Liu, Guangyao; Zuo, Jianlin

2017-08-09

Publications describing the diagnosis and treatment of anterior dislocation of the sacroiliac joint are scarce. We report the case a 19-year-old female at 8 weeks' gestation who presented with anterior fracture dislocation of the right sacroiliac joint, posterior fracture dislocation of the left sacroiliac joint (crescent fracture), and incomplete abortion resulting from high energy trauma. Orthopedic surgery involved standard anterior sacroiliac joint plating using an ilioinguinal approach combined with a modified Stoppa approach. Three attempts at complete abortion failed. Complete abortion was eventually achieved by dilatation and curettage two weeks after orthopedic surgery. Our findings reveal a need to improve techniques for diagnosis and treatment of anterior fracture dislocation of the sacroiliac joint, so greater attention can be paid to the rapid and effective management of associated comorbidities, and those resulting from the initial trauma.

VES/TEM 1D joint inversion by using Controlled Random Search (CRS) algorithm

NASA Astrophysics Data System (ADS)

Bortolozo, Cassiano Antonio; Porsani, Jorge Luís; Santos, Fernando Acácio Monteiro dos; Almeida, Emerson Rodrigo

2015-01-01

Electrical (DC) and Transient Electromagnetic (TEM) soundings are used in a great number of environmental, hydrological, and mining exploration studies. Usually, data interpretation is accomplished by individual 1D models resulting often in ambiguous models. This fact can be explained by the way as the two different methodologies sample the medium beneath surface. Vertical Electrical Sounding (VES) is good in marking resistive structures, while Transient Electromagnetic sounding (TEM) is very sensitive to conductive structures. Another difference is VES is better to detect shallow structures, while TEM soundings can reach deeper layers. A Matlab program for 1D joint inversion of VES and TEM soundings was developed aiming at exploring the best of both methods. The program uses CRS - Controlled Random Search - algorithm for both single and 1D joint inversions. Usually inversion programs use Marquadt type algorithms but for electrical and electromagnetic methods, these algorithms may find a local minimum or not converge. Initially, the algorithm was tested with synthetic data, and then it was used to invert experimental data from two places in Paraná sedimentary basin (Bebedouro and Pirassununga cities), both located in São Paulo State, Brazil. Geoelectric model obtained from VES and TEM data 1D joint inversion is similar to the real geological condition, and ambiguities were minimized. Results with synthetic and real data show that 1D VES/TEM joint inversion better recovers simulated models and shows a great potential in geological studies, especially in hydrogeological studies.

Taking two to tango: fMRI analysis of improvised joint action with physical contact

PubMed Central

Belyk, Michel; Brown, Steven

2018-01-01

Many forms of joint action involve physical coupling between the participants, such as when moving a sofa together or dancing a tango. We report the results of a novel two-person functional MRI study in which trained couple dancers engaged in bimanual contact with an experimenter standing next to the bore of the magnet, and in which the two alternated between being the leader and the follower of joint improvised movements. Leading showed a general pattern of self-orientation, being associated with brain areas involved in motor planning, navigation, sequencing, action monitoring, and error correction. In contrast, following showed a far more sensory, externally-oriented pattern, revealing areas involved in somatosensation, proprioception, motion tracking, social cognition, and outcome monitoring. We also had participants perform a “mutual” condition in which the movement patterns were pre-learned and the roles were symmetric, thereby minimizing any tendency toward either leading or following. The mutual condition showed greater activity in brain areas involved in mentalizing and social reward than did leading or following. Finally, the analysis of improvisation revealed the dual importance of motor-planning and working-memory areas. We discuss these results in terms of theories of both joint action and improvisation. PMID:29324862

The hindlimb in walking horses: 2. Net joint moments and joint powers.

PubMed

Clayton, H M; Hodson, E; Lanovaz, J L; Colborne, G R

2001-01-01

The objective of the study was to describe net joint moments and joint powers in the equine hindlimb during walking. The subjects were 5 sound horses. Kinematic and force data were collected synchronously and combined with morphometric information to determine net joint moments at each hindlimb joint throughout stance and swing. The results showed that the net joint moment was on the caudal/plantar side of all hindlimb joints at the start of stance when the limb was being actively retracted. It moved to the cranial/dorsal side around 24% stride at the hip and stifle and in terminal stance at the more distal joints. It remained on the cranial/dorsal side of all joints during the first half of swing to provide active limb protraction, then moved to the caudal/plantar aspect to reverse the direction of limb motion prior to ground contact. The hip joint was the main source of energy generation throughout the stride. It was assisted by the tarsal joint in both stance and swing phases and by the fetlock joint during the stance phase. The coffin joint acted as an energy damper during stance, whereas the stifle joint absorbed almost equal amounts of energy in the stance and swing phases. The coffin and fetlock joints absorbed energy as the limb was protracted and retracted during the swing phase, suggesting that their movements were driven by inertial forces. Future studies will apply these findings to detect changes in the energy profiles due to specific soft tissue injuries.

Experimental Studies on the Mechanical Behaviour of Rock Joints with Various Openings

NASA Astrophysics Data System (ADS)

Li, Y.; Oh, J.; Mitra, R.; Hebblewhite, B.

2016-03-01

The mechanical behaviour of rough joints is markedly affected by the degree of joint opening. A systematic experimental study was conducted to investigate the effect of the initial opening on both normal and shear deformations of rock joints. Two types of joints with triangular asperities were produced in the laboratory and subjected to compression tests and direct shear tests with different initial opening values. The results showed that opened rock joints allow much greater normal closure and result in much lower normal stiffness. A semi-logarithmic law incorporating the degree of interlocking is proposed to describe the normal deformation of opened rock joints. The proposed equation agrees well with the experimental results. Additionally, the results of direct shear tests demonstrated that shear strength and dilation are reduced because of reduced involvement of and increased damage to asperities in the process of shearing. The results indicate that constitutive models of rock joints that consider the true asperity contact area can be used to predict shear resistance along opened rock joints. Because rock masses are loosened and rock joints become open after excavation, the model suggested in this study can be incorporated into numerical procedures such as finite-element or discrete-element methods. Use of the model could then increase the accuracy and reliability of stability predictions for rock masses under excavation.

Design of a Virtual Player for Joint Improvisation with Humans in the Mirror Game

PubMed Central

Zhai, Chao; Alderisio, Francesco; Tsaneva-Atanasova, Krasimira; di Bernardo, Mario

2016-01-01

Joint improvisation is often observed among humans performing joint action tasks. Exploring the underlying cognitive and neural mechanisms behind the emergence of joint improvisation is an open research challenge. This paper investigates jointly improvised movements between two participants in the mirror game, a paradigmatic joint task example. First, experiments involving movement coordination of different dyads of human players are performed in order to build a human benchmark. No designation of leader and follower is given beforehand. We find that joint improvisation is characterized by the lack of a leader and high levels of movement synchronization. Then, a theoretical model is proposed to capture some features of their interaction, and a set of experiments is carried out to test and validate the model ability to reproduce the experimental observations. Furthermore, the model is used to drive a computer avatar able to successfully improvise joint motion with a human participant in real time. Finally, a convergence analysis of the proposed model is carried out to confirm its ability to reproduce joint movements between the participants. PMID:27123927

Design of a Virtual Player for Joint Improvisation with Humans in the Mirror Game.

PubMed

Zhai, Chao; Alderisio, Francesco; Słowiński, Piotr; Tsaneva-Atanasova, Krasimira; di Bernardo, Mario

2016-01-01

Joint improvisation is often observed among humans performing joint action tasks. Exploring the underlying cognitive and neural mechanisms behind the emergence of joint improvisation is an open research challenge. This paper investigates jointly improvised movements between two participants in the mirror game, a paradigmatic joint task example. First, experiments involving movement coordination of different dyads of human players are performed in order to build a human benchmark. No designation of leader and follower is given beforehand. We find that joint improvisation is characterized by the lack of a leader and high levels of movement synchronization. Then, a theoretical model is proposed to capture some features of their interaction, and a set of experiments is carried out to test and validate the model ability to reproduce the experimental observations. Furthermore, the model is used to drive a computer avatar able to successfully improvise joint motion with a human participant in real time. Finally, a convergence analysis of the proposed model is carried out to confirm its ability to reproduce joint movements between the participants.

Combined medial displacement calcaneal osteotomy, subtalar joint arthrodesis, and ankle arthrodiastasis for end-stage posterior tibial tendon dysfunction.

PubMed

Stapleton, John J; Belczyk, Ronald; Zgonis, Thomas; Polyzois, Vasilios D

2009-04-01

Combining an ankle arthrodiastasis with a medial displacement calcaneal osteotomy and a subtalar joint arthrodesis offers surgeons a joint-sparing procedure for young and active patients who have end-stage posterior tibial tendon dysfunction and ankle joint involvement. An isolated subtalar joint arthrodesis or triple arthrodesis combined with an ankle arthrodiastasis is an option that can be used in certain case scenarios. Delaying the need for a joint destructive procedure through an ankle arthrodiastasis, however, may have a great impact in the near future, as advancements are underway to improve the use of ankle endoprosthesis.

Youth, alcohol, and speeding : their joint contribution to highway accidents

DOT National Transportation Integrated Search

1976-09-01

The objective of the project was to obtain empirical data on the joint influence of slightly excessive speed and low-to-moderate blood-alcohol concentration upon accident-involvement as a function of age and driving experience, and to determine if th...

In Vivo Talocrural Joint Contact Mechanics With Functional Ankle Instability.

PubMed

Kobayashi, Takumi; Suzuki, Eiichi; Yamazaki, Naohito; Suzukawa, Makoto; Akaike, Atsushi; Shimizu, Kuniaki; Gamada, Kazuyoshi

2015-12-01

Functional ankle instability (FAI) may involve abnormal kinematics and contact mechanics during ankle internal rotation. Understanding of these abnormalities is important to prevent secondary problems in patients with FAI. However, there are no in vivo studies that have investigated talocrural joint contact mechanics during weightbearing ankle internal rotation. The objective of this study to determine talocrural contact mechanics during weightbearing ankle internal rotation in patients with FAI. Twelve male subjects with unilateral FAI (age range, 18-26 years) were enrolled. Computed tomography and fluoroscopic imaging of both lower extremities were obtained during weightbearing passive ankle joint complex rotation. Three-dimensional bone models created from the computed tomographic images were matched to the fluoroscopic images to compute 6 degrees of freedom for talocrural joint kinematics. The closest contact area in the talocrural joint in ankle neutral rotation and maximum internal rotation during either dorsiflexion or plantar flexion was determined using geometric bone models and talocrural joint kinematics data. The closest contact area in the talus shifted anteromedially during ankle dorsiflexion-internal rotation, whereas it shifted posteromedially during ankle plantar flexion-internal rotation. The closest contact area in FAI joints was significantly more medial than that in healthy joints during maximum ankle internal rotation and was associated with excessive talocrural internal rotation or inversion. This study demonstrated abnormal talocrural kinematics and contact mechanics in FAI subjects. Such abnormal kinematics may contribute to abnormal contact mechanics and may increase cartilage stress in FAI joints. Therapeutic, Level IV: cross-sectional case-control study. © 2015 The Author(s).

Joint Institute for Nanoscience Annual Report 2004

DOE Office of Scientific and Technical Information (OSTI.GOV)

Baer, Donald R.; Campbell, Charles

Due to the inherently interdisciplinary nature of nanoscience and nanotechnology, research in this arena is often significantly enhanced through creative cooperative activities. The Joint Institute for Nanoscience (JIN) is a venture of the University of Washington (UW) and Pacific Northwest National Laboratory (PNNL) to encourage and enhance high impact and high quality nanoscience and nanotechnology research that leverages the strengths and capabilities of both institutions, and to facilitate education in these areas. This report summarizes JIN award activities that took place during fiscal year 2004 and provides a historical list of JIN awardees, their resulting publications, and JIN-related meetings. Majormore » portions of the JIN efforts and resources are dedicated to funding graduate students and postdoctoral research associates to perform research in collaborations jointly directed by PNNL staff scientists and UW professors. JIN fellowships are awarded on the basis of applications that include research proposals. They have been very successful in expanding collaborations between PNNL and UW, which have led to many excellent joint publications and presentations and enhanced the competitiveness of both institutions for external grant funding. JIN-based interactions are playing a significant role in creating new research directions and reshaping existing research programs at both the UW and PNNL. The JIN also co-sponsors workshops on Nanoscale Science and Technology, four of which have been held in Seattle and one in Richland. In addition to involving PNNL staff in various UW nanoscience courses and seminars, a National Science Foundation grant, Development of UW-PNL Collaborative Curriculums in Nano-Science and Technology, has allowed the development of three intensive short courses that are taught by UW faculty, PNNL staff, and faculty from other institutions, including Washington State University, the University of Idaho, Stanford University, and the

Reoperations following proximal interphalangeal joint nonconstrained arthroplasties.

PubMed

Pritsch, Tamir; Rizzo, Marco

2011-09-01

To retrospectively analyze the reasons for reoperations following primary nonconstrained proximal interphalangeal (PIP) joint arthroplasty and review clinical outcomes in this group of patients with 1 or more reoperations. Between 2001 and 2009, 294 nonconstrained (203 pyrocarbon and 91 metal-plastic) PIP joint replacements were performed in our institution. A total of 76 fingers (59 patients) required reoperation (50 pyrocarbon and 26 metal-plastic). There were 40 women and 19 men with an average age of 51 years (range, 19-83 y). Primary diagnoses included osteoarthritis in 35, posttraumatic arthritis in 24, and inflammatory arthritis in 17 patients. There were 21 index, 27 middle, 18 ring, and 10 small fingers. The average number of reoperations per PIP joint was 1.6 (range, 1-4). A total of 45 joints had 1 reoperation, 19 had 2, 11 had 3, and 1 had 4. Extensor mechanism dysfunction was the most common reason for reoperation; it involved 51 of 76 fingers and was associated with Chamay or tendon-reflecting surgical approaches. Additional etiologies included component loosening in 17, collateral ligament failure in 10, and volar plate contracture in 8 cases. Inflammatory arthritis was associated with collateral ligament failure. Six fingers were eventually amputated, 9 had PIP joint arthrodeses, and 2 had resection arthroplasties. The arthrodesis and amputation rates correlated with the increased number of reoperations per finger. Clinically, most patients had no or mild pain at the most recent follow-up, and the PIP joint range-of-motion was not significantly different from preoperative values. Pain levels improved with longer follow-up. Reoperations following primary nonconstrained PIP joint arthroplasties are common. Extensor mechanism dysfunction was the most common reason for reoperation. The average reoperation rate was 1.6, and arthrodesis and amputation are associated with an increasing number of operations. Overall clinical outcomes demonstrated no

Effects of a Pilot Project To Involve Young Males in a School-Based Sexuality Education Program.

ERIC Educational Resources Information Center

Deatrick, Deborah A.; Knox, Cathryn Bradeen

Recent trends in rates of sexually transmitted diseases, AIDS, and teen pregnancies have led to a new emphasis on male involvement in family planning programs. Little research data exists on specific opinions, attitudes and needs of young males regarding the array of services available. This paper describes: (1) how market research (including…

The Analysis of Adhesively Bonded Advanced Composite Joints Using Joint Finite Elements

NASA Technical Reports Server (NTRS)

Stapleton, Scott E.; Waas, Anthony M.

2012-01-01

The design and sizing of adhesively bonded joints has always been a major bottleneck in the design of composite vehicles. Dense finite element (FE) meshes are required to capture the full behavior of a joint numerically, but these dense meshes are impractical in vehicle-scale models where a course mesh is more desirable to make quick assessments and comparisons of different joint geometries. Analytical models are often helpful in sizing, but difficulties arise in coupling these models with full-vehicle FE models. Therefore, a joint FE was created which can be used within structural FE models to make quick assessments of bonded composite joints. The shape functions of the joint FE were found by solving the governing equations for a structural model for a joint. By analytically determining the shape functions of the joint FE, the complex joint behavior can be captured with very few elements. This joint FE was modified and used to consider adhesives with functionally graded material properties to reduce the peel stress concentrations located near adherend discontinuities. Several practical concerns impede the actual use of such adhesives. These include increased manufacturing complications, alterations to the grading due to adhesive flow during manufacturing, and whether changing the loading conditions significantly impact the effectiveness of the grading. An analytical study is conducted to address these three concerns. Furthermore, proof-of-concept testing is conducted to show the potential advantages of functionally graded adhesives. In this study, grading is achieved by strategically placing glass beads within the adhesive layer at different densities along the joint. Furthermore, the capability to model non-linear adhesive constitutive behavior with large rotations was developed, and progressive failure of the adhesive was modeled by re-meshing the joint as the adhesive fails. Results predicted using the joint FE was compared with experimental results for various

Spacesuit mobility knee joints

NASA Technical Reports Server (NTRS)

Vykukal, H. C. (Inventor)

1979-01-01

Pressure suit mobility joints are for use in interconnecting adjacent segments of an hermetically sealed spacesuit in which low torques, low leakage and a high degree of reliability are required. Each of the joints is a special purpose joint characterized by substantially constant volume and low torque characteristics and includes linkages which restrain the joint from longitudinal distension and includes a flexible, substantially impermeable diaphragm of tubular configuration spanning the distance between pivotally supported annuli. The diaphragms of selected joints include rolling convolutions for balancing the joints, while various joints include wedge-shaped sections which enhance the range of motion for the joints.

The effect of sacroiliac joint mobilization on pelvic deformation and the static balance ability of female university students with si joint dysfunction.

PubMed

Son, Jeong-Hyun; Park, Gi Duck; Park, Hoo Sung

2014-06-01

[Purpose] The present study aimed to determine the effect of an 8-week program of joint mobilization on changes in pelvic obliquity and pain level in seventeen female university students aged in their 20's with sacroiliac joint dysfunction by dividing them into two groups: a joint mobilization group (MWM) and a control group. [Subjects] Seventeen subjects were selected from female university students aged in their 20's attending N University in Cheon-An City, Korea, The subjects had sacroiliac joint syndrome, but experienced no problems with daily living and had no previous experience of joint mobilization exercise. The subjects were randomly assigned to a joint mobilization group of eight and a control group of nine who performed joint mobilization exercise. [Methods] Body fat and lean body mass were measured using InBody 7.0 (Biospace, Korea). The Direct Segmental Multi-frequency Bioelectrical Impedance Analysis Method (DSM-BIA) was used for body composition measurement. A pressure footstool (Pedoscan, DIERS, Germany) and a trunk measurement system (Formetric 4D, DIERS, Germany), a 3D image processing apparatus with high resolution for vertebrae, were used to measure 3D trunk images of the vertebrae and pelvis obliquity, as well as static balance ability. [Result] The MWM group showed a significantly better Balance than the control group. In addition, the results of the left/right and the front/rear balance abilities were significantly better than those of the control group. [Conclusion] This study proved that a combination of mobilization with movement and functional training was effective in reducing pelvis malposition and pain, and improving static stability control.

Implementation of Joint Multi-Segment Training

NASA Technical Reports Server (NTRS)

Reagan, Marc; Smith, Wyatt; Bugrova, Skella; Silkov, Sergei

2000-01-01

The highest level of training for ISS flight is Joint Multi-Segment Training (JMST) simulations. These simulations allow two or more partners to conduct multi-segment training for their respective Mission Control Centers (MCC), include actual crew members, and usually include training facilities in each of the participating International Partner (IP) locations. It is the dress rehearsal for those events that exercise the interface between different IP modules and/or the decision making process between the different MCCs involved. This presentation will describe the challenge of successfully implementing JMST. It will start with a brief overview of who is involved, where they are located, and when JMSTs are required. Finally, it will illustrate many of the complications involved in just running a JMST between MCC-M and MCC-H. The viewer will leave with a much better appreciation for the complexities involved in successfully conducting a JMST of this nature, as well as an idea of how the picture will change as the other partners and payloads become involved.

U.S. Perspectives on the Joint Convention

DOE Office of Scientific and Technical Information (OSTI.GOV)

Strosnider, J.; Federline, M.; Camper, L.

The Joint Convention on the Safety of Spent Fuel Management and on the Safety of Radioactive Waste Management (Joint Convention) is an international convention, under the auspices of the International Atomic Energy Agency (IAEA). It is a companion to a suite of international conventions on nuclear safety and physical security, which serve to promote a global culture for the safe use of radioactive materials. Although the U.S. was the first nation to sign the Joint Convention on September 29, 1997, the ratification process was a challenging experience for the U.S., in the face of legislative priorities dominated by concerns formore » national security and threats from terrorism after September 11, 2001. Notwithstanding these prevailing circumstances, the U.S. ratified the Joint Convention in 2003, just prior to the First Review Meeting of the Contracting Parties, and participated fully therein. For the United States, participation as a Contracting Party provides many benefits. These range from working with other Parties to harmonize international approaches to achieve strong and effective nuclear safety programs on a global scale, to stimulating initiatives to improve safety systems within our own domestic programs, to learning about technical innovations by other Parties that can be useful to U.S. licensees, utilities, and industry in managing safety and its associated costs in our waste management activities. The Joint Convention process also provides opportunities to identify future areas of bilateral and multilateral technical and regulatory cooperation with other Parties, as well as an opportunity for U.S. vendors and suppliers to broaden their market to include foreign clients for safety improvement equipment and services. The Joint Convention is consistent with U.S. foreign policy considerations to support, as a priority, the strengthening of the worldwide safety culture in the use of nuclear energy. Because of its many benefits, we believe it is important

Japan-U.S. Joint Ventures in Higher Education: Language Education in an Uncertain Future.

ERIC Educational Resources Information Center

Clayton, Thomas

1991-01-01

Examines Japanese-U.S. joint venture language or U.S.-style education programs in Japan. These programs offer language and cultural education classes for those interested in English and for students who have failed in the Japanese education system. Problems facing these programs and the need to explore new, English-language education markets are…

Joint Enabling Capabilities Command

Science.gov Websites

Executive Director Chief of Staff Joint Planning Support Element Joint Communications Support Element mission Joint Enabling Capabilities Command provides decisive joint communications, planning and public and responsive support for joint communications, planning and public affairs. Priorities * Deliver

Ultrasonic measurement and monitoring of loads in bolts used in structural joints

NASA Astrophysics Data System (ADS)

Koshti, Ajay M.

2015-04-01

The paper is an overview of work by the author in measuring and monitoring loads in bolts using an ultrasonic extensometer. A number of cases of bolted joints are covered. These include, a clamped joint with clearance fit between the bolt and hole, a clamped joint with bolt in an interference fit with the hole, a flanged joint which allows the flange and bolt to bend; and a shear joint in a clevis and tang configuration. These applications were initially developed for measuring and monitoring preload in National Aeronautics and Space Administration (NASA) Space Shuttle Orbiter critical joints but are also applicable for monitoring loads in other critical bolted joints of structures such as transportation bridges and other aerospace structures. The papers cited here explain how to set-up a model to estimate the ultrasonic load factor and accuracy for the ultrasonic preload application in a clamped joint with clearance fit. The ultrasonic preload application for clamped joint with bolt in an interference fit can also be used to measure diametrical interference between the bolt shank and hole, as well as interference pressure on the bolt shank. Results of simulation and experimental data are given to demonstrate use of ultrasonic measurements in a shear joint. A bolt in a flanged joint experiences both tensile and bending loads. This application involves measurement of bending and tensile preload in a bolt. The ultrasonic beam bends due to bending load on the bolt. Results of a numerical technique to compute the trace of ultrasonic ray are presented.

Header: Do adult DTC programs prevent child maltreatment? Parental criminal justice involvement and children’s involvement with child protective services: Do adult drug treatment courts prevent child maltreatment?

PubMed Central

Eldred, Lindsey M.; Sloan, Frank A.; Evans, Kelly E.

2016-01-01

Background In light of evidence showing reduced criminal recidivism and cost savings, adult drug treatment courts have grown in popularity. However, the potential spillover benefits to family members are understudied. Objectives To examine: 1) the overlap between parents who were convicted of a substance-related offense and their children’s involvement with child protective services (CPS); and 2) whether parental participation in an adult drug treatment court program reduces children’s risk for CPS involvement. Methods Administrative data from North Carolina courts, birth records, and social services were linked at the child level. First, children of parents convicted of a substance-related offense were matched to (a) children of parents convicted of a non-substance-related offense and (b) those not convicted of any offense. Second, we compared children of parents who completed a DTC program with children of parents who were referred but did not enroll, who enrolled for <90 days but did not complete, and who enrolled for 90+ days but did not complete. Multivariate logistic regression was used to model group differences in the odds of being reported to CPS in the one to three years following parental criminal conviction or, alternatively, being referred to a DTC program. Results Children of parents convicted of a substance-related offense were at greater risk of CPS involvement than children whose parents were not convicted of any charge, but DTC participation did not mitigate this risk. Conclusion/Importance The role of specialty courts as a strategy for reducing children’s risk of maltreatment should be further explored. PMID:26789656

The San Francisco Joint Institutional Transportation Systems Management Program.

ERIC Educational Resources Information Center

Fink, Ira; LaPointe, Robert

1981-01-01

Transportation systems management (TSM) programs are discussed, particularly the 1977 program of the University of California, San Francisco, which led to traffic reduction and improved vehicle flow. The city's implementation plan for a similar TSM program for 14 educational institutions and hospitals is described. (MLW)

Towards Scalable Strain Gauge-Based Joint Torque Sensors

PubMed Central

D’Imperio, Mariapaola; Cannella, Ferdinando; Caldwell, Darwin G.; Cuschieri, Alfred

2017-01-01

During recent decades, strain gauge-based joint torque sensors have been commonly used to provide high-fidelity torque measurements in robotics. Although measurement of joint torque/force is often required in engineering research and development, the gluing and wiring of strain gauges used as torque sensors pose difficulties during integration within the restricted space available in small joints. The problem is compounded by the need for a scalable geometric design to measure joint torque. In this communication, we describe a novel design of a strain gauge-based mono-axial torque sensor referred to as square-cut torque sensor (SCTS), the significant features of which are high degree of linearity, symmetry, and high scalability in terms of both size and measuring range. Most importantly, SCTS provides easy access for gluing and wiring of the strain gauges on sensor surface despite the limited available space. We demonstrated that the SCTS was better in terms of symmetry (clockwise and counterclockwise rotation) and more linear. These capabilities have been shown through finite element modeling (ANSYS) confirmed by observed data obtained by load testing experiments. The high performance of SCTS was confirmed by studies involving changes in size, material and/or wings width and thickness. Finally, we demonstrated that the SCTS can be successfully implementation inside the hip joints of miniaturized hydraulically actuated quadruped robot-MiniHyQ. This communication is based on work presented at the 18th International Conference on Climbing and Walking Robots (CLAWAR). PMID:28820446

Towards Scalable Strain Gauge-Based Joint Torque Sensors.

PubMed

Khan, Hamza; D'Imperio, Mariapaola; Cannella, Ferdinando; Caldwell, Darwin G; Cuschieri, Alfred; Semini, Claudio

2017-08-18

During recent decades, strain gauge-based joint torque sensors have been commonly used to provide high-fidelity torque measurements in robotics. Although measurement of joint torque/force is often required in engineering research and development, the gluing and wiring of strain gauges used as torque sensors pose difficulties during integration within the restricted space available in small joints. The problem is compounded by the need for a scalable geometric design to measure joint torque. In this communication, we describe a novel design of a strain gauge-based mono-axial torque sensor referred to as square-cut torque sensor (SCTS) , the significant features of which are high degree of linearity, symmetry, and high scalability in terms of both size and measuring range. Most importantly, SCTS provides easy access for gluing and wiring of the strain gauges on sensor surface despite the limited available space. We demonstrated that the SCTS was better in terms of symmetry (clockwise and counterclockwise rotation) and more linear. These capabilities have been shown through finite element modeling (ANSYS) confirmed by observed data obtained by load testing experiments. The high performance of SCTS was confirmed by studies involving changes in size, material and/or wings width and thickness. Finally, we demonstrated that the SCTS can be successfully implementation inside the hip joints of miniaturized hydraulically actuated quadruped robot- MiniHyQ . This communication is based on work presented at the 18th International Conference on Climbing and Walking Robots (CLAWAR).

Sacroiliac joint pain in the pediatric population.

PubMed

Stoev, Ivan; Powers, Alexander K; Puglisi, Joan A; Munro, Rebecca; Leonard, Jeffrey R

2012-06-01

The sacroiliac (SI) joint can be a pain generator in 13%-27% of cases of back pain in adults. These numbers are largely unknown for the pediatric population. In children and especially girls, development of the pelvic girdle makes the SI joint prone to misalignment. Young athletes sustain repeated stress on their SI joints, and sometimes even minor trauma can result in lasting pain that mimics radiculopathy. The authors present a series of 48 pediatric patients who were evaluated for low-back pain and were found to have SI joint misalignment as the cause of their symptoms. They were treated with a simple maneuver described in this paper that realigned their SI joint and provided significant improvement of symptoms. A retrospective review of the electronic records identified 48 patients who were referred with primary complaints of low-back pain and were determined to have SI joint misalignment during bedside examination maneuvers described here. Three patients did not have a record of their response to treatment and were excluded. Patients were evaluated by a physical therapist and had the realignment procedure performed on the day of initial consultation. The authors collected data regarding the immediate effect of the procedure, as well as the duration of pain relief at follow-up visits. Eighty percent of patients experienced dramatic improvement in symptoms that had a lasting effect after the initial treatment. The majority of them were given a home exercise program, and only 2 of the 36 patients who experienced significant relief had to be treated again. Fifty-three percent of all patients had immediate and complete resolution of symptoms. Three of the 48 patients had missing data from the medical records and were excluded from computations. Back pain is multifactorial, and the authors' data demonstrate the potential importance of SI joint pathology. Although the technique described here for treatment of misaligned SI joints in the pediatric patients is not

The POP Program: the patient education advantage.

PubMed

Claeys, M; Mosher, C; Reesman, D

1998-01-01

In 1992, a preoperative education program was developed for total joint replacement patients in a small community hospital. The goals of the program were to increase educational opportunities for the joint replacement patients, prepare patients for hospitalization, plan for discharge needs, and increase efficiency of the orthopaedic program. Since 1992, approximately 600 patients have attended the education program. Outcomes have included positive responses from patients regarding their preparedness for surgery, increased participation in their plan of care, coordinated discharge planning, decreased length of stay, and progression across the continuum of care. A multidisciplinary approach to preparing patients for surgery allows for a comprehensive and efficient education program. Marketing of successful programs can enhance an institution's competitive advantage and help ensure the hospital's viability in the current health care arena.

Joint chemical agent detector (JCAD): the future of chemical agent detection