Halftoning processing on a JPEG-compressed image

NASA Astrophysics Data System (ADS)

Sibade, Cedric; Barizien, Stephane; Akil, Mohamed; Perroton, Laurent

2003-12-01

Digital image processing algorithms are usually designed for the raw format, that is on an uncompressed representation of the image. Therefore prior to transforming or processing a compressed format, decompression is applied; then, the result of the processing application is finally re-compressed for further transfer or storage. The change of data representation is resource-consuming in terms of computation, time and memory usage. In the wide format printing industry, this problem becomes an important issue: e.g. a 1 m2 input color image, scanned at 600 dpi exceeds 1.6 GB in its raw representation. However, some image processing algorithms can be performed in the compressed-domain, by applying an equivalent operation on the compressed format. This paper is presenting an innovative application of the halftoning processing operation by screening, to be applied on JPEG-compressed image. This compressed-domain transform is performed by computing the threshold operation of the screening algorithm in the DCT domain. This algorithm is illustrated by examples for different halftone masks. A pre-sharpening operation, applied on a JPEG-compressed low quality image is also described; it allows to de-noise and to enhance the contours of this image.

Region of interest and windowing-based progressive medical image delivery using JPEG2000

NASA Astrophysics Data System (ADS)

Nagaraj, Nithin; Mukhopadhyay, Sudipta; Wheeler, Frederick W.; Avila, Ricardo S.

2003-05-01

An important telemedicine application is the perusal of CT scans (digital format) from a central server housed in a healthcare enterprise across a bandwidth constrained network by radiologists situated at remote locations for medical diagnostic purposes. It is generally expected that a viewing station respond to an image request by displaying the image within 1-2 seconds. Owing to limited bandwidth, it may not be possible to deliver the complete image in such a short period of time with traditional techniques. In this paper, we investigate progressive image delivery solutions by using JPEG 2000. An estimate of the time taken in different network bandwidths is performed to compare their relative merits. We further make use of the fact that most medical images are 12-16 bits, but would ultimately be converted to an 8-bit image via windowing for display on the monitor. We propose a windowing progressive RoI technique to exploit this and investigate JPEG 2000 RoI based compression after applying a favorite or a default window setting on the original image. Subsequent requests for different RoIs and window settings would then be processed at the server. For the windowing progressive RoI mode, we report a 50% reduction in transmission time.

High-quality JPEG compression history detection for fake uncompressed images

NASA Astrophysics Data System (ADS)

Zhang, Rong; Wang, Rang-Ding; Guo, Li-Jun; Jiang, Bao-Chuan

2017-05-01

Authenticity is one of the most important evaluation factors of images for photography competitions or journalism. Unusual compression history of an image often implies the illicit intent of its author. Our work aims at distinguishing real uncompressed images from fake uncompressed images that are saved in uncompressed formats but have been previously compressed. To detect the potential image JPEG compression, we analyze the JPEG compression artifacts based on the tetrolet covering, which corresponds to the local image geometrical structure. Since the compression can alter the structure information, the tetrolet covering indexes may be changed if a compression is performed on the test image. Such changes can provide valuable clues about the image compression history. To be specific, the test image is first compressed with different quality factors to generate a set of temporary images. Then, the test image is compared with each temporary image block-by-block to investigate whether the tetrolet covering index of each 4×4 block is different between them. The percentages of the changed tetrolet covering indexes corresponding to the quality factors (from low to high) are computed and used to form the p-curve, the local minimum of which may indicate the potential compression. Our experimental results demonstrate the advantage of our method to detect JPEG compressions of high quality, even the highest quality factors such as 98, 99, or 100 of the standard JPEG compression, from uncompressed-format images. At the same time, our detection algorithm can accurately identify the corresponding compression quality factor.

Metadata requirements for results of diagnostic imaging procedures: a BIIF profile to support user applications

NASA Astrophysics Data System (ADS)

Brown, Nicholas J.; Lloyd, David S.; Reynolds, Melvin I.; Plummer, David L.

2002-05-01

A visible digital image is rendered from a set of digital image data. Medical digital image data can be stored as either: (a) pre-rendered format, corresponding to a photographic print, or (b) un-rendered format, corresponding to a photographic negative. The appropriate image data storage format and associated header data (metadata) required by a user of the results of a diagnostic procedure recorded electronically depends on the task(s) to be performed. The DICOM standard provides a rich set of metadata that supports the needs of complex applications. Many end user applications, such as simple report text viewing and display of a selected image, are not so demanding and generic image formats such as JPEG are sometimes used. However, these are lacking some basic identification requirements. In this paper we make specific proposals for minimal extensions to generic image metadata of value in various domains, which enable safe use in the case of two simple healthcare end user scenarios: (a) viewing of text and a selected JPEG image activated by a hyperlink and (b) viewing of one or more JPEG images together with superimposed text and graphics annotation using a file specified by a profile of the ISO/IEC Basic Image Interchange Format (BIIF).

Camera-Model Identification Using Markovian Transition Probability Matrix

NASA Astrophysics Data System (ADS)

Xu, Guanshuo; Gao, Shang; Shi, Yun Qing; Hu, Ruimin; Su, Wei

Detecting the (brands and) models of digital cameras from given digital images has become a popular research topic in the field of digital forensics. As most of images are JPEG compressed before they are output from cameras, we propose to use an effective image statistical model to characterize the difference JPEG 2-D arrays of Y and Cb components from the JPEG images taken by various camera models. Specifically, the transition probability matrices derived from four different directional Markov processes applied to the image difference JPEG 2-D arrays are used to identify statistical difference caused by image formation pipelines inside different camera models. All elements of the transition probability matrices, after a thresholding technique, are directly used as features for classification purpose. Multi-class support vector machines (SVM) are used as the classification tool. The effectiveness of our proposed statistical model is demonstrated by large-scale experimental results.

Toward privacy-preserving JPEG image retrieval

NASA Astrophysics Data System (ADS)

Cheng, Hang; Wang, Jingyue; Wang, Meiqing; Zhong, Shangping

2017-07-01

This paper proposes a privacy-preserving retrieval scheme for JPEG images based on local variance. Three parties are involved in the scheme: the content owner, the server, and the authorized user. The content owner encrypts JPEG images for privacy protection by jointly using permutation cipher and stream cipher, and then, the encrypted versions are uploaded to the server. With an encrypted query image provided by an authorized user, the server may extract blockwise local variances in different directions without knowing the plaintext content. After that, it can calculate the similarity between the encrypted query image and each encrypted database image by a local variance-based feature comparison mechanism. The authorized user with the encryption key can decrypt the returned encrypted images with plaintext content similar to the query image. The experimental results show that the proposed scheme not only provides effective privacy-preserving retrieval service but also ensures both format compliance and file size preservation for encrypted JPEG images.

Digital Semaphore: Technical Feasibility of QR Code Optical Signaling for Fleet Communications

DTIC Science & Technology

2013-06-01

Standards (http://www.iso.org) JIS Japanese Industrial Standard JPEG Joint Photographic Experts Group (digital image format; http://www.jpeg.org) LED...Denso Wave corporation in the 1990s for the Japanese automotive manufacturing industry. See Appendix A for full details. Reed-Solomon Error...eliminates camera blur induced by the shutter, providing clear images at extremely high frame rates. Thusly, digital cinema cameras are more suitable

Cell edge detection in JPEG2000 wavelet domain - analysis on sigmoid function edge model.

PubMed

Punys, Vytenis; Maknickas, Ramunas

2011-01-01

Big virtual microscopy images (80K x 60K pixels and larger) are usually stored using the JPEG2000 image compression scheme. Diagnostic quantification, based on image analysis, might be faster if performed on compressed data (approx. 20 times less the original amount), representing the coefficients of the wavelet transform. The analysis of possible edge detection without reverse wavelet transform is presented in the paper. Two edge detection methods, suitable for JPEG2000 bi-orthogonal wavelets, are proposed. The methods are adjusted according calculated parameters of sigmoid edge model. The results of model analysis indicate more suitable method for given bi-orthogonal wavelet.

Steganographic embedding in containers-images

NASA Astrophysics Data System (ADS)

Nikishova, A. V.; Omelchenko, T. A.; Makedonskij, S. A.

2018-05-01

Steganography is one of the approaches to ensuring the protection of information transmitted over the network. But a steganographic method should vary depending on a used container. According to statistics, the most widely used containers are images and the most common image format is JPEG. Authors propose a method of data embedding into a frequency area of images in format JPEG 2000. It is proposed to use the method of Benham-Memon- Yeo-Yeung, in which instead of discrete cosine transform, discrete wavelet transform is used. Two requirements for images are formulated. Structure similarity is chosen to obtain quality assessment of data embedding. Experiments confirm that requirements satisfaction allows achieving high quality assessment of data embedding.

A JPEG backward-compatible HDR image compression

NASA Astrophysics Data System (ADS)

Korshunov, Pavel; Ebrahimi, Touradj

2012-10-01

High Dynamic Range (HDR) imaging is expected to become one of the technologies that could shape next generation of consumer digital photography. Manufacturers are rolling out cameras and displays capable of capturing and rendering HDR images. The popularity and full public adoption of HDR content is however hindered by the lack of standards in evaluation of quality, file formats, and compression, as well as large legacy base of Low Dynamic Range (LDR) displays that are unable to render HDR. To facilitate wide spread of HDR usage, the backward compatibility of HDR technology with commonly used legacy image storage, rendering, and compression is necessary. Although many tone-mapping algorithms were developed for generating viewable LDR images from HDR content, there is no consensus on which algorithm to use and under which conditions. This paper, via a series of subjective evaluations, demonstrates the dependency of perceived quality of the tone-mapped LDR images on environmental parameters and image content. Based on the results of subjective tests, it proposes to extend JPEG file format, as the most popular image format, in a backward compatible manner to also deal with HDR pictures. To this end, the paper provides an architecture to achieve such backward compatibility with JPEG and demonstrates efficiency of a simple implementation of this framework when compared to the state of the art HDR image compression.

Block selective redaction for minimizing loss during de-identification of burned in text in irreversibly compressed JPEG medical images.

PubMed

Clunie, David A; Gebow, Dan

2015-01-01

Deidentification of medical images requires attention to both header information as well as the pixel data itself, in which burned-in text may be present. If the pixel data to be deidentified is stored in a compressed form, traditionally it is decompressed, identifying text is redacted, and if necessary, pixel data are recompressed. Decompression without recompression may result in images of excessive or intractable size. Recompression with an irreversible scheme is undesirable because it may cause additional loss in the diagnostically relevant regions of the images. The irreversible (lossy) JPEG compression scheme works on small blocks of the image independently, hence, redaction can selectively be confined only to those blocks containing identifying text, leaving all other blocks unchanged. An open source implementation of selective redaction and a demonstration of its applicability to multiframe color ultrasound images is described. The process can be applied either to standalone JPEG images or JPEG bit streams encapsulated in other formats, which in the case of medical images, is usually DICOM.

Applications of the JPEG standard in a medical environment

NASA Astrophysics Data System (ADS)

Wittenberg, Ulrich

1993-10-01

JPEG is a very versatile image coding and compression standard for single images. Medical images make a higher demand on image quality and precision than the usual 'pretty pictures'. In this paper the potential applications of the various JPEG coding modes in a medical environment are evaluated. Due to legal reasons the lossless modes are especially interesting. The spatial modes are equally important because medical data may well exceed the maximum of 12 bit precision allowed for the DCT modes. The performance of the spatial predictors is investigated. From the users point of view the progressive modes, which provide a fast but coarse approximation of the final image, reduce the subjective time one has to wait for it, so they also reduce the user's frustration. Even the lossy modes will find some applications, but they have to be handled with care, because repeated lossy coding and decoding leads to a degradation of the image quality. The amount of this degradation is investigated. The JPEG standard alone is not sufficient for a PACS because it does not store enough additional data such as creation data or details of the imaging modality. Therefore it will be an imbedded coding format in standards like TIFF or ACR/NEMA. It is concluded that the JPEG standard is versatile enough to match the requirements of the medical community.

Fragmentation Point Detection of JPEG Images at DHT Using Validator

NASA Astrophysics Data System (ADS)

Mohamad, Kamaruddin Malik; Deris, Mustafa Mat

File carving is an important, practical technique for data recovery in digital forensics investigation and is particularly useful when filesystem metadata is unavailable or damaged. The research on reassembly of JPEG files with RST markers, fragmented within the scan area have been done before. However, fragmentation within Define Huffman Table (DHT) segment is yet to be resolved. This paper analyzes the fragmentation within the DHT area and list out all the fragmentation possibilities. Two main contributions are made in this paper. Firstly, three fragmentation points within DHT area are listed. Secondly, few novel validators are proposed to detect these fragmentations. The result obtained from tests done on manually fragmented JPEG files, showed that all three fragmentation points within DHT are successfully detected using validators.

A Java viewer to publish Digital Imaging and Communications in Medicine (DICOM) radiologic images on the World Wide Web.

PubMed

Setti, E; Musumeci, R

2001-06-01

The world wide web is an exciting service that allows one to publish electronic documents made of text and images on the internet. Client software called a web browser can access these documents, and display and print them. The most popular browsers are currently Microsoft Internet Explorer (Microsoft, Redmond, WA) and Netscape Communicator (Netscape Communications, Mountain View, CA). These browsers can display text in hypertext markup language (HTML) format and images in Joint Photographic Expert Group (JPEG) and Graphic Interchange Format (GIF). Currently, neither browser can display radiologic images in native Digital Imaging and Communications in Medicine (DICOM) format. With the aim to publish radiologic images on the internet, we wrote a dedicated Java applet. Our software can display radiologic and histologic images in DICOM, JPEG, and GIF formats, and provides a a number of functions like windowing and magnification lens. The applet is compatible with some web browsers, even the older versions. The software is free and available from the author.

Toward objective image quality metrics: the AIC Eval Program of the JPEG

NASA Astrophysics Data System (ADS)

Richter, Thomas; Larabi, Chaker

2008-08-01

Objective quality assessment of lossy image compression codecs is an important part of the recent call of the JPEG for Advanced Image Coding. The target of the AIC ad-hoc group is twofold: First, to receive state-of-the-art still image codecs and to propose suitable technology for standardization; and second, to study objective image quality metrics to evaluate the performance of such codes. Even tthough the performance of an objective metric is defined by how well it predicts the outcome of a subjective assessment, one can also study the usefulness of a metric in a non-traditional way indirectly, namely by measuring the subjective quality improvement of a codec that has been optimized for a specific objective metric. This approach shall be demonstrated here on the recently proposed HDPhoto format14 introduced by Microsoft and a SSIM-tuned17 version of it by one of the authors. We compare these two implementations with JPEG1 in two variations and a visual and PSNR optimal JPEG200013 implementation. To this end, we use subjective and objective tests based on the multiscale SSIM and a new DCT based metric.

Context-dependent JPEG backward-compatible high-dynamic range image compression

NASA Astrophysics Data System (ADS)

Korshunov, Pavel; Ebrahimi, Touradj

2013-10-01

High-dynamic range (HDR) imaging is expected, together with ultrahigh definition and high-frame rate video, to become a technology that may change photo, TV, and film industries. Many cameras and displays capable of capturing and rendering both HDR images and video are already available in the market. The popularity and full-public adoption of HDR content is, however, hindered by the lack of standards in evaluation of quality, file formats, and compression, as well as large legacy base of low-dynamic range (LDR) displays that are unable to render HDR. To facilitate the wide spread of HDR usage, the backward compatibility of HDR with commonly used legacy technologies for storage, rendering, and compression of video and images are necessary. Although many tone-mapping algorithms are developed for generating viewable LDR content from HDR, there is no consensus of which algorithm to use and under which conditions. We, via a series of subjective evaluations, demonstrate the dependency of the perceptual quality of the tone-mapped LDR images on the context: environmental factors, display parameters, and image content itself. Based on the results of subjective tests, it proposes to extend JPEG file format, the most popular image format, in a backward compatible manner to deal with HDR images also. An architecture to achieve such backward compatibility with JPEG is proposed. A simple implementation of lossy compression demonstrates the efficiency of the proposed architecture compared with the state-of-the-art HDR image compression.

Helioviewer.org: Browsing Very Large Image Archives Online Using JPEG 2000

NASA Astrophysics Data System (ADS)

Hughitt, V. K.; Ireland, J.; Mueller, D.; Dimitoglou, G.; Garcia Ortiz, J.; Schmidt, L.; Wamsler, B.; Beck, J.; Alexanderian, A.; Fleck, B.

2009-12-01

As the amount of solar data available to scientists continues to increase at faster and faster rates, it is important that there exist simple tools for navigating this data quickly with a minimal amount of effort. By combining heterogeneous solar physics datatypes such as full-disk images and coronagraphs, along with feature and event information, Helioviewer offers a simple and intuitive way to browse multiple datasets simultaneously. Images are stored in a repository using the JPEG 2000 format and tiled dynamically upon a client's request. By tiling images and serving only the portions of the image requested, it is possible for the client to work with very large images without having to fetch all of the data at once. In addition to a focus on intercommunication with other virtual observatories and browsers (VSO, HEK, etc), Helioviewer will offer a number of externally-available application programming interfaces (APIs) to enable easy third party use, adoption and extension. Recent efforts have resulted in increased performance, dynamic movie generation, and improved support for mobile web browsers. Future functionality will include: support for additional data-sources including RHESSI, SDO, STEREO, and TRACE, a navigable timeline of recorded solar events, social annotation, and basic client-side image processing.

Lossless compression of grayscale medical images: effectiveness of traditional and state-of-the-art approaches

NASA Astrophysics Data System (ADS)

Clunie, David A.

2000-05-01

Proprietary compression schemes have a cost and risk associated with their support, end of life and interoperability. Standards reduce this cost and risk. The new JPEG-LS process (ISO/IEC 14495-1), and the lossless mode of the proposed JPEG 2000 scheme (ISO/IEC CD15444-1), new standard schemes that may be incorporated into DICOM, are evaluated here. Three thousand, six hundred and seventy-nine (3,679) single frame grayscale images from multiple anatomical regions, modalities and vendors, were tested. For all images combined JPEG-LS and JPEG 2000 performed equally well (3.81), almost as well as CALIC (3.91), a complex predictive scheme used only as a benchmark. Both out-performed existing JPEG (3.04 with optimum predictor choice per image, 2.79 for previous pixel prediction as most commonly used in DICOM). Text dictionary schemes performed poorly (gzip 2.38), as did image dictionary schemes without statistical modeling (PNG 2.76). Proprietary transform based schemes did not perform as well as JPEG-LS or JPEG 2000 (S+P Arithmetic 3.4, CREW 3.56). Stratified by modality, JPEG-LS compressed CT images (4.00), MR (3.59), NM (5.98), US (3.4), IO (2.66), CR (3.64), DX (2.43), and MG (2.62). CALIC always achieved the highest compression except for one modality for which JPEG-LS did better (MG digital vendor A JPEG-LS 4.02, CALIC 4.01). JPEG-LS outperformed existing JPEG for all modalities. The use of standard schemes can achieve state of the art performance, regardless of modality, JPEG-LS is simple, easy to implement, consumes less memory, and is faster than JPEG 2000, though JPEG 2000 will offer lossy and progressive transmission. It is recommended that DICOM add transfer syntaxes for both JPEG-LS and JPEG 2000.

Interactive Courseware Standards

DTIC Science & Technology

1992-07-01

music industry standard provides data formats and transmission specifications for musical notation. Joint Photographic Experts Group (JPEG). This...has been used in the music industry for several years, especially for electronically programmable keyboards and 16 instruments. The video compression

Performance comparison of leading image codecs: H.264/AVC Intra, JPEG2000, and Microsoft HD Photo

NASA Astrophysics Data System (ADS)

Tran, Trac D.; Liu, Lijie; Topiwala, Pankaj

2007-09-01

This paper provides a detailed rate-distortion performance comparison between JPEG2000, Microsoft HD Photo, and H.264/AVC High Profile 4:4:4 I-frame coding for high-resolution still images and high-definition (HD) 1080p video sequences. This work is an extension to our previous comparative study published in previous SPIE conferences [1, 2]. Here we further optimize all three codecs for compression performance. Coding simulations are performed on a set of large-format color images captured from mainstream digital cameras and 1080p HD video sequences commonly used for H.264/AVC standardization work. Overall, our experimental results show that all three codecs offer very similar coding performances at the high-quality, high-resolution setting. Differences tend to be data-dependent: JPEG2000 with the wavelet technology tends to be the best performer with smooth spatial data; H.264/AVC High-Profile with advanced spatial prediction modes tends to cope best with more complex visual content; Microsoft HD Photo tends to be the most consistent across the board. For the still-image data sets, JPEG2000 offers the best R-D performance gains (around 0.2 to 1 dB in peak signal-to-noise ratio) over H.264/AVC High-Profile intra coding and Microsoft HD Photo. For the 1080p video data set, all three codecs offer very similar coding performance. As in [1, 2], neither do we consider scalability nor complexity in this study (JPEG2000 is operating in non-scalable, but optimal performance mode).

Roundness variation in JPEG images affects the automated process of nuclear immunohistochemical quantification: correction with a linear regression model.

PubMed

López, Carlos; Jaén Martinez, Joaquín; Lejeune, Marylène; Escrivà, Patricia; Salvadó, Maria T; Pons, Lluis E; Alvaro, Tomás; Baucells, Jordi; García-Rojo, Marcial; Cugat, Xavier; Bosch, Ramón

2009-10-01

The volume of digital image (DI) storage continues to be an important problem in computer-assisted pathology. DI compression enables the size of files to be reduced but with the disadvantage of loss of quality. Previous results indicated that the efficiency of computer-assisted quantification of immunohistochemically stained cell nuclei may be significantly reduced when compressed DIs are used. This study attempts to show, with respect to immunohistochemically stained nuclei, which morphometric parameters may be altered by the different levels of JPEG compression, and the implications of these alterations for automated nuclear counts, and further, develops a method for correcting this discrepancy in the nuclear count. For this purpose, 47 DIs from different tissues were captured in uncompressed TIFF format and converted to 1:3, 1:23 and 1:46 compression JPEG images. Sixty-five positive objects were selected from these images, and six morphological parameters were measured and compared for each object in TIFF images and those of the different compression levels using a set of previously developed and tested macros. Roundness proved to be the only morphological parameter that was significantly affected by image compression. Factors to correct the discrepancy in the roundness estimate were derived from linear regression models for each compression level, thereby eliminating the statistically significant differences between measurements in the equivalent images. These correction factors were incorporated in the automated macros, where they reduced the nuclear quantification differences arising from image compression. Our results demonstrate that it is possible to carry out unbiased automated immunohistochemical nuclear quantification in compressed DIs with a methodology that could be easily incorporated in different systems of digital image analysis.

Interband coding extension of the new lossless JPEG standard

NASA Astrophysics Data System (ADS)

Memon, Nasir D.; Wu, Xiaolin; Sippy, V.; Miller, G.

1997-01-01

Due to the perceived inadequacy of current standards for lossless image compression, the JPEG committee of the International Standards Organization (ISO) has been developing a new standard. A baseline algorithm, called JPEG-LS, has already been completed and is awaiting approval by national bodies. The JPEG-LS baseline algorithm despite being simple is surprisingly efficient, and provides compression performance that is within a few percent of the best and more sophisticated techniques reported in the literature. Extensive experimentations performed by the authors seem to indicate that an overall improvement by more than 10 percent in compression performance will be difficult to obtain even at the cost of great complexity; at least not with traditional approaches to lossless image compression. However, if we allow inter-band decorrelation and modeling in the baseline algorithm, nearly 30 percent improvement in compression gains for specific images in the test set become possible with a modest computational cost. In this paper we propose and investigate a few techniques for exploiting inter-band correlations in multi-band images. These techniques have been designed within the framework of the baseline algorithm, and require minimal changes to the basic architecture of the baseline, retaining its essential simplicity.

76 FR 62134 - Bureau of Consular Affairs; Registration for the Diversity Immigrant (DV-2013) Visa Program

Federal Register 2010, 2011, 2012, 2013, 2014

2011-10-06

... Resident. We will not accept group or family photographs; you must include a separate photograph for each... new digital image: The image file format must be in the Joint Photographic Experts Group (JPEG) format... Web site four to six weeks before the scheduled interviews with U.S. consular officers at overseas...

JPEG vs. JPEG 2000: an objective comparison of image encoding quality

NASA Astrophysics Data System (ADS)

Ebrahimi, Farzad; Chamik, Matthieu; Winkler, Stefan

2004-11-01

This paper describes an objective comparison of the image quality of different encoders. Our approach is based on estimating the visual impact of compression artifacts on perceived quality. We present a tool that measures these artifacts in an image and uses them to compute a prediction of the Mean Opinion Score (MOS) obtained in subjective experiments. We show that the MOS predictions by our proposed tool are a better indicator of perceived image quality than PSNR, especially for highly compressed images. For the encoder comparison, we compress a set of 29 test images with two JPEG encoders (Adobe Photoshop and IrfanView) and three JPEG2000 encoders (JasPer, Kakadu, and IrfanView) at various compression ratios. We compute blockiness, blur, and MOS predictions as well as PSNR of the compressed images. Our results show that the IrfanView JPEG encoder produces consistently better images than the Adobe Photoshop JPEG encoder at the same data rate. The differences between the JPEG2000 encoders in our test are less pronounced; JasPer comes out as the best codec, closely followed by IrfanView and Kakadu. Comparing the JPEG- and JPEG2000-encoding quality of IrfanView, we find that JPEG has a slight edge at low compression ratios, while JPEG2000 is the clear winner at medium and high compression ratios.

Mutual information-based analysis of JPEG2000 contexts.

PubMed

Liu, Zhen; Karam, Lina J

2005-04-01

Context-based arithmetic coding has been widely adopted in image and video compression and is a key component of the new JPEG2000 image compression standard. In this paper, the contexts used in JPEG2000 are analyzed using the mutual information, which is closely related to the compression performance. We first show that, when combining the contexts, the mutual information between the contexts and the encoded data will decrease unless the conditional probability distributions of the combined contexts are the same. Given I, the initial number of contexts, and F, the final desired number of contexts, there are S(I, F) possible context classification schemes where S(I, F) is called the Stirling number of the second kind. The optimal classification scheme is the one that gives the maximum mutual information. Instead of using an exhaustive search, the optimal classification scheme can be obtained through a modified generalized Lloyd algorithm with the relative entropy as the distortion metric. For binary arithmetic coding, the search complexity can be reduced by using dynamic programming. Our experimental results show that the JPEG2000 contexts capture the correlations among the wavelet coefficients very well. At the same time, the number of contexts used as part of the standard can be reduced without loss in the coding performance.

New Paranal Views

NASA Astrophysics Data System (ADS)

2001-01-01

Last year saw very good progress at ESO's Paranal Observatory , the site of the Very Large Telescope (VLT). The third and fourth 8.2-m Unit Telescopes, MELIPAL and YEPUN had "First Light" (cf. PR 01/00 and PR 18/00 ), while the first two, ANTU and KUEYEN , were busy collecting first-class data for hundreds of astronomers. Meanwhile, work continued towards the next phase of the VLT project, the combination of the telescopes into the VLT Interferometer. The test instrument, VINCI (cf. PR 22/00 ) is now being installed in the VLTI Laboratory at the centre of the observing platform on the top of Paranal. Below is a new collection of video sequences and photos that illustrate the latest developments at the Paranal Observatory. The were obtained by the EPR Video Team in December 2000. The photos are available in different formats, including "high-resolution" that is suitable for reproduction purposes. A related ESO Video News Reel for professional broadcasters will soon become available and will be announced via the usual channels. Overview Paranal Observatory (Dec. 2000) Video Clip 02a/01 [MPEG - 4.5Mb] ESO PR Video Clip 02a/01 "Paranal Observatory (December 2000)" (4875 frames/3:15 min) [MPEG Video+Audio; 160x120 pix; 4.5Mb] [MPEG Video+Audio; 320x240 pix; 13.5 Mb] [RealMedia; streaming; 34kps] [RealMedia; streaming; 200kps] ESO Video Clip 02a/01 shows some of the construction activities at the Paranal Observatory in December 2000, beginning with a general view of the site. Then follow views of the Residencia , a building that has been designed by Architects Auer and Weber in Munich - it integrates very well into the desert, creating a welcome recreational site for staff and visitors in this harsh environment. The next scenes focus on the "stations" for the auxiliary telescopes for the VLTI and the installation of two delay lines in the 140-m long underground tunnel. The following part of the video clip shows the start-up of the excavation work for the 2.6-m VLT Survey Telescope (VST) as well as the location known as the "NTT Peak", now under consideration for the installation of the 4-m VISTA telescope. The last images are from to the second 8.2-m Unit Telescope, KUEYEN, that has been in full use by the astronomers with the UVES and FORS2 instruments since April 2000. ESO PR Photo 04a/01 ESO PR Photo 04a/01 [Preview - JPEG: 466 x 400 pix - 58k] [Normal - JPEG: 931 x 800 pix - 688k] [Hires - JPEG: 3000 x 2577 pix - 7.6M] Caption : PR Photo 04a/01 shows an afternoon view from the Paranal summit towards East, with the Base Camp and the new Residencia on the slope to the right, above the valley in the shadow of the mountain. ESO PR Photo 04b/01 ESO PR Photo 04b/01 [Preview - JPEG: 791 x 400 pix - 89k] [Normal - JPEG: 1582 x 800 pix - 1.1Mk] [Hires - JPEG: 3000 x 1517 pix - 3.6M] PR Photo 04b/01 shows the ramp leading to the main entrance to the partly subterranean Residencia , with the steel skeleton for the dome over the central area in place. ESO PR Photo 04c/01 ESO PR Photo 04c/01 [Preview - JPEG: 498 x 400 pix - 65k] [Normal - JPEG: 995 x 800 pix - 640k] [Hires - JPEG: 3000 x 2411 pix - 6.6M] PR Photo 04c/01 is an indoor view of the reception hall under the dome, looking towards the main entrance. ESO PR Photo 04d/01 ESO PR Photo 04d/01 [Preview - JPEG: 472 x 400 pix - 61k] [Normal - JPEG: 944 x 800 pix - 632k] [Hires - JPEG: 3000 x 2543 pix - 5.8M] PR Photo 04d/01 shows the ramps from the reception area towards the rooms. The VLT Interferometer The Delay Lines consitute a most important element of the VLT Interferometer , cf. PR Photos 26a-e/00. At this moment, two Delay Lines are operational on site. A third system will be integrated early this year. The VLTI Delay Line is located in an underground tunnel that is 168 metres long and 8 metres wide. This configuration has been designed to accommodate up to eight Delay Lines, including their transfer optics in an ideal environment: stable temperature, high degree of cleanliness, low levels of straylight, low air turbulence. The positions of the Delay Line carriages are computed to adjust the Optical Path Lengths requested for the fringe pattern observation. The positions are controlled in real time by a laser metrology system, specially developed for this purpose. The position precision is about 20 nm (1 nm = 10 -9 m, or 1 millionth of a millimetre) over a distance of 120 metres. The maximum velocity is 0.50 m/s in position mode and maximum 0.05 m/s in operation. The system is designed for 25 year of operation and to survive earthquake up to 8.6 magnitude on the Richter scale. The VLTI Delay Line is a three-year project, carried out by ESO in collaboration with Dutch Space Holdings (formerly Fokker Space) and TPD-TNO . VLTI Delay Lines (December 2000) - ESO PR Video Clip 02b/01 [MPEG - 3.6Mb] ESO PR Video Clip 02b/01 "VLTI Delay Lines (December 2000)" (2000 frames/1:20 min) [MPEG Video+Audio; 160x120 pix; 3.6Mb] [MPEG Video+Audio; 320x240 pix; 13.7 Mb] [RealMedia; streaming; 34kps] [RealMedia; streaming; 200kps] ESO Video Clip 02b/00 shows the Delay Lines of the VLT Interferometer facility at Paranal during tests. One of the carriages is moving on 66-metre long rectified rails, driven by a linear motor. The carriage is equipped with three wheels in order to preserve high guidance accuracy. Another important element is the Cat's Eye that reflects the light from the telescope to the VLT instrumentation. This optical system is made of aluminium (including the mirrors) to avoid thermo-mechanical problems. ESO PR Photo 04e/01 ESO PR Photo 04e/01 [Preview - JPEG: 400 x 402 pix - 62k] [Normal - JPEG: 800 x 804 pix - 544k] [Hires - JPEG: 3000 x 3016 pix - 6.2M] Caption : PR Photo 04e/01 shows one of the 30 "stations" for the movable 1.8-m Auxiliary Telescopes. When one of these telescopes is positioned ("parked") on top of it, The light will be guided through the hole towards the Interferometric Tunnel and the Delay Lines. ESO PR Photo 04f/01 ESO PR Photo 04f/01 [Preview - JPEG: 568 x 400 pix - 96k] [Normal - JPEG: 1136 x 800 pix - 840k] [Hires - JPEG: 3000 x 2112 pix - 4.6M] PR Photo 04f/01 shows a general view of the Interferometric Tunnel and the Delay Lines. ESO PR Photo 04g/01 ESO PR Photo 04g/01 [Preview - JPEG: 406 x 400 pix - 62k] [Normal - JPEG: 812 x 800 pix - 448k] [Hires - JPEG: 3000 x 2956 pix - 5.5M] PR Photo 04g/01 shows one of the Delay Line carriages in parking position. The "NTT Peak" The "NTT Peak" is a mountain top located about 2 km to the north of Paranal. It received this name when ESO considered to move the 3.58-m New Technology Telescope from La Silla to this peak. The possibility of installing the 4-m VISTA telescope (cf. PR 03/00 ) on this peak is now being discussed. ESO PR Photo 04h/01 ESO PR Photo 04h/01 [Preview - JPEG: 630 x 400 pix - 89k] [Normal - JPEG: 1259 x 800 pix - 1.1M] [Hires - JPEG: 3000 x 1907 pix - 5.2M] PR Photo 04h/01 shows the view from the "NTT Peak" towards south, vith the Paranal mountain and the VLT enclosures in the background. ESO PR Photo 04i/01 ESO PR Photo 04i/01 [Preview - JPEG: 516 x 400 pix - 50k] [Normal - JPEG: 1031 x 800 pix - 664k] [Hires - JPEG: 3000 x 2328 pix - 6.0M] PR Photo 04i/01 is a view towards the "NTT Peak" from the top of the Paranal mountain. The access road and the concrete pillar that was used to support a site testing telescope at the top of this peak are seen This is the caption to ESO PR Photos 04a-1/01 and PR Video Clips 02a-b/01 . They may be reproduced, if credit is given to the European Southern Observatory. The ESO PR Video Clips service to visitors to the ESO website provides "animated" illustrations of the ongoing work and events at the European Southern Observatory. The most recent clip was: ESO PR Video Clip 01/01 about the Physics On Stage Festival (11 January 2001) . Information is also available on the web about other ESO videos.

Image compression/decompression based on mathematical transform, reduction/expansion, and image sharpening

DOEpatents

Fu, Chi-Yung; Petrich, Loren I.

1997-01-01

An image represented in a first image array of pixels is first decimated in two dimensions before being compressed by a predefined compression algorithm such as JPEG. Another possible predefined compression algorithm can involve a wavelet technique. The compressed, reduced image is then transmitted over the limited bandwidth transmission medium, and the transmitted image is decompressed using an algorithm which is an inverse of the predefined compression algorithm (such as reverse JPEG). The decompressed, reduced image is then interpolated back to its original array size. Edges (contours) in the image are then sharpened to enhance the perceptual quality of the reconstructed image. Specific sharpening techniques are described.

Cloud Intrusion Detection and Repair (CIDAR)

DTIC Science & Technology

2016-02-01

form for VLC , Swftools-png2swf, Swftools-jpeg2swf, Dillo and GIMP. The superscript indicates the bit width of each expression atom. “sext(v, w... challenges in input rectification is the need to deal with nested fields. In general, input formats are in tree structures containing arbitrarily...length indicator constraints is challeng - ing, because of the presence of nested fields in hierarchical input format. For example, an integer field may

JPEG XS call for proposals subjective evaluations

NASA Astrophysics Data System (ADS)

McNally, David; Bruylants, Tim; Willème, Alexandre; Ebrahimi, Touradj; Schelkens, Peter; Macq, Benoit

2017-09-01

In March 2016 the Joint Photographic Experts Group (JPEG), formally known as ISO/IEC SC29 WG1, issued a call for proposals soliciting compression technologies for a low-latency, lightweight and visually transparent video compression scheme. Within the JPEG family of standards, this scheme was denominated JPEG XS. The subjective evaluation of visually lossless compressed video sequences at high resolutions and bit depths poses particular challenges. This paper describes the adopted procedures, the subjective evaluation setup, the evaluation process and summarizes the obtained results which were achieved in the context of the JPEG XS standardization process.

Image quality (IQ) guided multispectral image compression

NASA Astrophysics Data System (ADS)

Zheng, Yufeng; Chen, Genshe; Wang, Zhonghai; Blasch, Erik

2016-05-01

Image compression is necessary for data transportation, which saves both transferring time and storage space. In this paper, we focus on our discussion on lossy compression. There are many standard image formats and corresponding compression algorithms, for examples, JPEG (DCT -- discrete cosine transform), JPEG 2000 (DWT -- discrete wavelet transform), BPG (better portable graphics) and TIFF (LZW -- Lempel-Ziv-Welch). The image quality (IQ) of decompressed image will be measured by numerical metrics such as root mean square error (RMSE), peak signal-to-noise ratio (PSNR), and structural Similarity (SSIM) Index. Given an image and a specified IQ, we will investigate how to select a compression method and its parameters to achieve an expected compression. Our scenario consists of 3 steps. The first step is to compress a set of interested images by varying parameters and compute their IQs for each compression method. The second step is to create several regression models per compression method after analyzing the IQ-measurement versus compression-parameter from a number of compressed images. The third step is to compress the given image with the specified IQ using the selected compression method (JPEG, JPEG2000, BPG, or TIFF) according to the regressed models. The IQ may be specified by a compression ratio (e.g., 100), then we will select the compression method of the highest IQ (SSIM, or PSNR). Or the IQ may be specified by a IQ metric (e.g., SSIM = 0.8, or PSNR = 50), then we will select the compression method of the highest compression ratio. Our experiments tested on thermal (long-wave infrared) images (in gray scales) showed very promising results.

High bit depth infrared image compression via low bit depth codecs

NASA Astrophysics Data System (ADS)

Belyaev, Evgeny; Mantel, Claire; Forchhammer, Søren

2017-08-01

Future infrared remote sensing systems, such as monitoring of the Earth's environment by satellites, infrastructure inspection by unmanned airborne vehicles etc., will require 16 bit depth infrared images to be compressed and stored or transmitted for further analysis. Such systems are equipped with low power embedded platforms where image or video data is compressed by a hardware block called the video processing unit (VPU). However, in many cases using two 8-bit VPUs can provide advantages compared with using higher bit depth image compression directly. We propose to compress 16 bit depth images via 8 bit depth codecs in the following way. First, an input 16 bit depth image is mapped into 8 bit depth images, e.g., the first image contains only the most significant bytes (MSB image) and the second one contains only the least significant bytes (LSB image). Then each image is compressed by an image or video codec with 8 bits per pixel input format. We analyze how the compression parameters for both MSB and LSB images should be chosen to provide the maximum objective quality for a given compression ratio. Finally, we apply the proposed infrared image compression method utilizing JPEG and H.264/AVC codecs, which are usually available in efficient implementations, and compare their rate-distortion performance with JPEG2000, JPEG-XT and H.265/HEVC codecs supporting direct compression of infrared images in 16 bit depth format. A preliminary result shows that two 8 bit H.264/AVC codecs can achieve similar result as 16 bit HEVC codec.

Image compression/decompression based on mathematical transform, reduction/expansion, and image sharpening

DOEpatents

Fu, C.Y.; Petrich, L.I.

1997-12-30

An image represented in a first image array of pixels is first decimated in two dimensions before being compressed by a predefined compression algorithm such as JPEG. Another possible predefined compression algorithm can involve a wavelet technique. The compressed, reduced image is then transmitted over the limited bandwidth transmission medium, and the transmitted image is decompressed using an algorithm which is an inverse of the predefined compression algorithm (such as reverse JPEG). The decompressed, reduced image is then interpolated back to its original array size. Edges (contours) in the image are then sharpened to enhance the perceptual quality of the reconstructed image. Specific sharpening techniques are described. 22 figs.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Temple, Brian Allen; Armstrong, Jerawan Chudoung

This document is a mid-year report on a deliverable for the PYTHON Radiography Analysis Tool (PyRAT) for project LANL12-RS-107J in FY15. The deliverable is deliverable number 2 in the work package and is titled “Add the ability to read in more types of image file formats in PyRAT”. Right now PyRAT can only read in uncompressed TIF files (tiff files). It is planned to expand the file formats that can be read by PyRAT, making it easier to use in more situations. A summary of the file formats added include jpeg, jpg, png and formatted ASCII files.

Clinical evaluation of JPEG2000 compression for digital mammography

NASA Astrophysics Data System (ADS)

Sung, Min-Mo; Kim, Hee-Joung; Kim, Eun-Kyung; Kwak, Jin-Young; Yoo, Jae-Kyung; Yoo, Hyung-Sik

2002-06-01

Medical images, such as computed radiography (CR), and digital mammographic images will require large storage facilities and long transmission times for picture archiving and communications system (PACS) implementation. American College of Radiology and National Equipment Manufacturers Association (ACR/NEMA) group is planning to adopt a JPEG2000 compression algorithm in digital imaging and communications in medicine (DICOM) standard to better utilize medical images. The purpose of the study was to evaluate the compression ratios of JPEG2000 for digital mammographic images using peak signal-to-noise ratio (PSNR), receiver operating characteristic (ROC) analysis, and the t-test. The traditional statistical quality measures such as PSNR, which is a commonly used measure for the evaluation of reconstructed images, measures how the reconstructed image differs from the original by making pixel-by-pixel comparisons. The ability to accurately discriminate diseased cases from normal cases is evaluated using ROC curve analysis. ROC curves can be used to compare the diagnostic performance of two or more reconstructed images. The t test can be also used to evaluate the subjective image quality of reconstructed images. The results of the t test suggested that the possible compression ratios using JPEG2000 for digital mammographic images may be as much as 15:1 without visual loss or with preserving significant medical information at a confidence level of 99%, although both PSNR and ROC analyses suggest as much as 80:1 compression ratio can be achieved without affecting clinical diagnostic performance.

A software platform for the analysis of dermatology images

NASA Astrophysics Data System (ADS)

Vlassi, Maria; Mavraganis, Vlasios; Asvestas, Panteleimon

2017-11-01

The purpose of this paper is to present a software platform developed in Python programming environment that can be used for the processing and analysis of dermatology images. The platform provides the capability for reading a file that contains a dermatology image. The platform supports image formats such as Windows bitmaps, JPEG, JPEG2000, portable network graphics, TIFF. Furthermore, it provides suitable tools for selecting, either manually or automatically, a region of interest (ROI) on the image. The automated selection of a ROI includes filtering for smoothing the image and thresholding. The proposed software platform has a friendly and clear graphical user interface and could be a useful second-opinion tool to a dermatologist. Furthermore, it could be used to classify images including from other anatomical parts such as breast or lung, after proper re-training of the classification algorithms.

Dynamic power scheduling system for JPEG2000 delivery over wireless networks

NASA Astrophysics Data System (ADS)

Martina, Maurizio; Vacca, Fabrizio

2003-06-01

Third generation mobile terminals diffusion is encouraging the development of new multimedia based applications. The reliable transmission of audiovisual content will gain major interest being one of the most valuable services. Nevertheless, mobile scenario is severely power constrained: high compression ratios and refined energy management strategies are highly advisable. JPEG2000 as the source encoding stage assures excellent performance with extremely good visual quality. However the limited power budged imposes to limit the computational effort in order to save as much power as possible. Starting from an error prone environment, as the wireless one, high error-resilience features need to be employed. This paper tries to investigate the trade-off between quality and power in such a challenging environment.

Visualization of JPEG Metadata

NASA Astrophysics Data System (ADS)

Malik Mohamad, Kamaruddin; Deris, Mustafa Mat

There are a lot of information embedded in JPEG image than just graphics. Visualization of its metadata would benefit digital forensic investigator to view embedded data including corrupted image where no graphics can be displayed in order to assist in evidence collection for cases such as child pornography or steganography. There are already available tools such as metadata readers, editors and extraction tools but mostly focusing on visualizing attribute information of JPEG Exif. However, none have been done to visualize metadata by consolidating markers summary, header structure, Huffman table and quantization table in a single program. In this paper, metadata visualization is done by developing a program that able to summarize all existing markers, header structure, Huffman table and quantization table in JPEG. The result shows that visualization of metadata helps viewing the hidden information within JPEG more easily.

Design of a motion JPEG (M/JPEG) adapter card

NASA Astrophysics Data System (ADS)

Lee, D. H.; Sudharsanan, Subramania I.

1994-05-01

In this paper we describe a design of a high performance JPEG (Joint Photographic Experts Group) Micro Channel adapter card. The card, tested on a range of PS/2 platforms (models 50 to 95), can complete JPEG operations on a 640 by 240 pixel image within 1/60 of a second, thus enabling real-time capture and display of high quality digital video. The card accepts digital pixels for either a YUV 4:2:2 or an RGB 4:4:4 pixel bus and has been shown to handle up to 2.05 MBytes/second of compressed data. The compressed data is transmitted to a host memory area by Direct Memory Access operations. The card uses a single C-Cube's CL550 JPEG processor that complies with the baseline JPEG. We give broad descriptions of the hardware that controls the video interface, CL550, and the system interface. Some critical design points that enhance the overall performance of the M/JPEG systems are pointed out. The control of the adapter card is achieved by an interrupt driven software that runs under DOS. The software performs a variety of tasks that include change of color space (RGB or YUV), change of quantization and Huffman tables, odd and even field control and some diagnostic operations.

Estimating JPEG2000 compression for image forensics using Benford's Law

NASA Astrophysics Data System (ADS)

Qadir, Ghulam; Zhao, Xi; Ho, Anthony T. S.

2010-05-01

With the tremendous growth and usage of digital images nowadays, the integrity and authenticity of digital content is becoming increasingly important, and a growing concern to many government and commercial sectors. Image Forensics, based on a passive statistical analysis of the image data only, is an alternative approach to the active embedding of data associated with Digital Watermarking. Benford's Law was first introduced to analyse the probability distribution of the 1st digit (1-9) numbers of natural data, and has since been applied to Accounting Forensics for detecting fraudulent income tax returns [9]. More recently, Benford's Law has been further applied to image processing and image forensics. For example, Fu et al. [5] proposed a Generalised Benford's Law technique for estimating the Quality Factor (QF) of JPEG compressed images. In our previous work, we proposed a framework incorporating the Generalised Benford's Law to accurately detect unknown JPEG compression rates of watermarked images in semi-fragile watermarking schemes. JPEG2000 (a relatively new image compression standard) offers higher compression rates and better image quality as compared to JPEG compression. In this paper, we propose the novel use of Benford's Law for estimating JPEG2000 compression for image forensics applications. By analysing the DWT coefficients and JPEG2000 compression on 1338 test images, the initial results indicate that the 1st digit probability of DWT coefficients follow the Benford's Law. The unknown JPEG2000 compression rates of the image can also be derived, and proved with the help of a divergence factor, which shows the deviation between the probabilities and Benford's Law. Based on 1338 test images, the mean divergence for DWT coefficients is approximately 0.0016, which is lower than DCT coefficients at 0.0034. However, the mean divergence for JPEG2000 images compression rate at 0.1 is 0.0108, which is much higher than uncompressed DWT coefficients. This result clearly indicates a presence of compression in the image. Moreover, we compare the results of 1st digit probability and divergence among JPEG2000 compression rates at 0.1, 0.3, 0.5 and 0.9. The initial results show that the expected difference among them could be used for further analysis to estimate the unknown JPEG2000 compression rates.

JPEG XS-based frame buffer compression inside HEVC for power-aware video compression

NASA Astrophysics Data System (ADS)

Willème, Alexandre; Descampe, Antonin; Rouvroy, Gaël.; Pellegrin, Pascal; Macq, Benoit

2017-09-01

With the emergence of Ultra-High Definition video, reference frame buffers (FBs) inside HEVC-like encoders and decoders have to sustain huge bandwidth. The power consumed by these external memory accesses accounts for a significant share of the codec's total consumption. This paper describes a solution to significantly decrease the FB's bandwidth, making HEVC encoder more suitable for use in power-aware applications. The proposed prototype consists in integrating an embedded lightweight, low-latency and visually lossless codec at the FB interface inside HEVC in order to store each reference frame as several compressed bitstreams. As opposed to previous works, our solution compresses large picture areas (ranging from a CTU to a frame stripe) independently in order to better exploit the spatial redundancy found in the reference frame. This work investigates two data reuse schemes namely Level-C and Level-D. Our approach is made possible thanks to simplified motion estimation mechanisms further reducing the FB's bandwidth and inducing very low quality degradation. In this work, we integrated JPEG XS, the upcoming standard for lightweight low-latency video compression, inside HEVC. In practice, the proposed implementation is based on HM 16.8 and on XSM 1.1.2 (JPEG XS Test Model). Through this paper, the architecture of our HEVC with JPEG XS-based frame buffer compression is described. Then its performance is compared to HM encoder. Compared to previous works, our prototype provides significant external memory bandwidth reduction. Depending on the reuse scheme, one can expect bandwidth and FB size reduction ranging from 50% to 83.3% without significant quality degradation.

A comparison of the fractal and JPEG algorithms

NASA Technical Reports Server (NTRS)

Cheung, K.-M.; Shahshahani, M.

1991-01-01

A proprietary fractal image compression algorithm and the Joint Photographic Experts Group (JPEG) industry standard algorithm for image compression are compared. In every case, the JPEG algorithm was superior to the fractal method at a given compression ratio according to a root mean square criterion and a peak signal to noise criterion.

Storage, retrieval, and edit of digital video using Motion JPEG

NASA Astrophysics Data System (ADS)

Sudharsanan, Subramania I.; Lee, D. H.

1994-04-01

In a companion paper we describe a Micro Channel adapter card that can perform real-time JPEG (Joint Photographic Experts Group) compression of a 640 by 480 24-bit image within 1/30th of a second. Since this corresponds to NTSC video rates at considerably good perceptual quality, this system can be used for real-time capture and manipulation of continuously fed video. To facilitate capturing the compressed video in a storage medium, an IBM Bus master SCSI adapter with cache is utilized. Efficacy of the data transfer mechanism is considerably improved using the System Control Block architecture, an extension to Micro Channel bus masters. We show experimental results that the overall system can perform at compressed data rates of about 1.5 MBytes/second sustained and with sporadic peaks to about 1.8 MBytes/second depending on the image sequence content. We also describe mechanisms to access the compressed data very efficiently through special file formats. This in turn permits creation of simpler sequence editors. Another advantage of the special file format is easy control of forward, backward and slow motion playback. The proposed method can be extended for design of a video compression subsystem for a variety of personal computing systems.

Non-parametric adaptative JPEG fragments carving

NASA Astrophysics Data System (ADS)

Amrouche, Sabrina Cherifa; Salamani, Dalila

2018-04-01

The most challenging JPEG recovery tasks arise when the file header is missing. In this paper we propose to use a two layer machine learning model to restore headerless JPEG images. We first build a classifier able to identify the structural properties of the images/fragments and then use an AutoEncoder (AE) to learn the fragment features for the header prediction. We define a JPEG universal header and the remaining free image parameters (Height, Width) are predicted with a Gradient Boosting Classifier. Our approach resulted in 90% accuracy using the manually defined features and 78% accuracy using the AE features.

The effect of JPEG compression on automated detection of microaneurysms in retinal images

NASA Astrophysics Data System (ADS)

Cree, M. J.; Jelinek, H. F.

2008-02-01

As JPEG compression at source is ubiquitous in retinal imaging, and the block artefacts introduced are known to be of similar size to microaneurysms (an important indicator of diabetic retinopathy) it is prudent to evaluate the effect of JPEG compression on automated detection of retinal pathology. Retinal images were acquired at high quality and then compressed to various lower qualities. An automated microaneurysm detector was run on the retinal images of various qualities of JPEG compression and the ability to predict the presence of diabetic retinopathy based on the detected presence of microaneurysms was evaluated with receiver operating characteristic (ROC) methodology. The negative effect of JPEG compression on automated detection was observed even at levels of compression sometimes used in retinal eye-screening programmes and these may have important clinical implications for deciding on acceptable levels of compression for a fully automated eye-screening programme.

Detection of shifted double JPEG compression by an adaptive DCT coefficient model

NASA Astrophysics Data System (ADS)

Wang, Shi-Lin; Liew, Alan Wee-Chung; Li, Sheng-Hong; Zhang, Yu-Jin; Li, Jian-Hua

2014-12-01

In many JPEG image splicing forgeries, the tampered image patch has been JPEG-compressed twice with different block alignments. Such phenomenon in JPEG image forgeries is called the shifted double JPEG (SDJPEG) compression effect. Detection of SDJPEG-compressed patches could help in detecting and locating the tampered region. However, the current SDJPEG detection methods do not provide satisfactory results especially when the tampered region is small. In this paper, we propose a new SDJPEG detection method based on an adaptive discrete cosine transform (DCT) coefficient model. DCT coefficient distributions for SDJPEG and non-SDJPEG patches have been analyzed and a discriminative feature has been proposed to perform the two-class classification. An adaptive approach is employed to select the most discriminative DCT modes for SDJPEG detection. The experimental results show that the proposed approach can achieve much better results compared with some existing approaches in SDJPEG patch detection especially when the patch size is small.

A block-based JPEG-LS compression technique with lossless region of interest

NASA Astrophysics Data System (ADS)

Deng, Lihua; Huang, Zhenghua; Yao, Shoukui

2018-03-01

JPEG-LS lossless compression algorithm is used in many specialized applications that emphasize on the attainment of high fidelity for its lower complexity and better compression ratios than the lossless JPEG standard. But it cannot prevent error diffusion because of the context dependence of the algorithm, and have low compression rate when compared to lossy compression. In this paper, we firstly divide the image into two parts: ROI regions and non-ROI regions. Then we adopt a block-based image compression technique to decrease the range of error diffusion. We provide JPEG-LS lossless compression for the image blocks which include the whole or part region of interest (ROI) and JPEG-LS near lossless compression for the image blocks which are included in the non-ROI (unimportant) regions. Finally, a set of experiments are designed to assess the effectiveness of the proposed compression method.

FBCOT: a fast block coding option for JPEG 2000

NASA Astrophysics Data System (ADS)

Taubman, David; Naman, Aous; Mathew, Reji

2017-09-01

Based on the EBCOT algorithm, JPEG 2000 finds application in many fields, including high performance scientific, geospatial and video coding applications. Beyond digital cinema, JPEG 2000 is also attractive for low-latency video communications. The main obstacle for some of these applications is the relatively high computational complexity of the block coder, especially at high bit-rates. This paper proposes a drop-in replacement for the JPEG 2000 block coding algorithm, achieving much higher encoding and decoding throughputs, with only modest loss in coding efficiency (typically < 0.5dB). The algorithm provides only limited quality/SNR scalability, but offers truly reversible transcoding to/from any standard JPEG 2000 block bit-stream. The proposed FAST block coder can be used with EBCOT's post-compression RD-optimization methodology, allowing a target compressed bit-rate to be achieved even at low latencies, leading to the name FBCOT (Fast Block Coding with Optimized Truncation).

Optimal JPWL Forward Error Correction Rate Allocation for Robust JPEG 2000 Images and Video Streaming over Mobile Ad Hoc Networks

NASA Astrophysics Data System (ADS)

Agueh, Max; Diouris, Jean-François; Diop, Magaye; Devaux, François-Olivier; De Vleeschouwer, Christophe; Macq, Benoit

2008-12-01

Based on the analysis of real mobile ad hoc network (MANET) traces, we derive in this paper an optimal wireless JPEG 2000 compliant forward error correction (FEC) rate allocation scheme for a robust streaming of images and videos over MANET. The packet-based proposed scheme has a low complexity and is compliant to JPWL, the 11th part of the JPEG 2000 standard. The effectiveness of the proposed method is evaluated using a wireless Motion JPEG 2000 client/server application; and the ability of the optimal scheme to guarantee quality of service (QoS) to wireless clients is demonstrated.

Scan-Based Implementation of JPEG 2000 Extensions

NASA Technical Reports Server (NTRS)

Rountree, Janet C.; Webb, Brian N.; Flohr, Thomas J.; Marcellin, Michael W.

2001-01-01

JPEG 2000 Part 2 (Extensions) contains a number of technologies that are of potential interest in remote sensing applications. These include arbitrary wavelet transforms, techniques to limit boundary artifacts in tiles, multiple component transforms, and trellis-coded quantization (TCQ). We are investigating the addition of these features to the low-memory (scan-based) implementation of JPEG 2000 Part 1. A scan-based implementation of TCQ has been realized and tested, with a very small performance loss as compared with the full image (frame-based) version. A proposed amendment to JPEG 2000 Part 2 will effect the syntax changes required to make scan-based TCQ compatible with the standard.

Oblivious image watermarking combined with JPEG compression

NASA Astrophysics Data System (ADS)

Chen, Qing; Maitre, Henri; Pesquet-Popescu, Beatrice

2003-06-01

For most data hiding applications, the main source of concern is the effect of lossy compression on hidden information. The objective of watermarking is fundamentally in conflict with lossy compression. The latter attempts to remove all irrelevant and redundant information from a signal, while the former uses the irrelevant information to mask the presence of hidden data. Compression on a watermarked image can significantly affect the retrieval of the watermark. Past investigations of this problem have heavily relied on simulation. It is desirable not only to measure the effect of compression on embedded watermark, but also to control the embedding process to survive lossy compression. In this paper, we focus on oblivious watermarking by assuming that the watermarked image inevitably undergoes JPEG compression prior to watermark extraction. We propose an image-adaptive watermarking scheme where the watermarking algorithm and the JPEG compression standard are jointly considered. Watermark embedding takes into consideration the JPEG compression quality factor and exploits an HVS model to adaptively attain a proper trade-off among transparency, hiding data rate, and robustness to JPEG compression. The scheme estimates the image-dependent payload under JPEG compression to achieve the watermarking bit allocation in a determinate way, while maintaining consistent watermark retrieval performance.

Report about the Solar Eclipse on August 11, 1999

NASA Astrophysics Data System (ADS)

1999-08-01

This webpage provides information about the total eclipse on Wednesday, August 11, 1999, as it was seen by ESO staff, mostly at or near the ESO Headquarters in Garching (Bavaria, Germany). The zone of totality was about 108 km wide and the ESO HQ were located only 8 km south of the line of maximum totality. The duration of the phase of totality was about 2 min 17 sec. The weather was quite troublesome in this geographical area. Heavy clouds moved across the sky during the entire event, but there were also some holes in between. Consequently, sites that were only a few kilometres from each other had very different viewing conditions. Some photos and spectra of the eclipsed Sun are displayed below, with short texts about the circumstances under which they were made. Please note that reproduction of pictures on this webpage is only permitted, if the author is mentioned as source. Information made available before the eclipse is available here. Eclipse Impressions at the ESO HQ Photo by Eddy Pomaroli Preparing for the Eclipse Photo: Eddy Pomaroli [JEG: 400 x 239 pix - 116k] [JPEG: 800 x 477 pix - 481k] [JPEG: 3000 x 1789 pix - 3.9M] Photo by Eddy Pomaroli During the 1st Partial Phase Photo: Eddy Pomaroli [JPEG: 400 x 275 pix - 135k] [JPEG: 800 x 549 pix - 434k] [JPEG: 2908 x 1997 pix - 5.9M] Photo by Hamid Mehrgan Heavy Clouds Above Digital Photo: Hamid Mehrgan [JPEG: 400 x 320 pix - 140k] [JPEG: 800 x 640 pix - 540k] [JPEG: 1280 x 1024 pix - 631k] Photo by Olaf Iwert Totality Approaching Digital Photo: Olaf Iwert [JPEG: 400 x 320 pix - 149k] [JPEG: 800 x 640 pix - 380k] [JPEG: 1280 x 1024 pix - 536k] Photo by Olaf Iwert Beginning of Totality Digital Photo: Olaf Iwert [JPEG: 400 x 236 pix - 86k] [JPEG: 800 x 471 pix - 184k] [JPEG: 1280 x 753 pix - 217k] Photo by Olaf Iwert A Happy Eclipse Watcher Digital Photo: Olaf Iwert [JPEG: 400 x 311 pix - 144k] [JPEG: 800 x 622 pix - 333k] [JPEG: 1280 x 995 pix - 644k] ESO HQ Eclipse Video Clip [MPEG-version] ESO HQ Eclipse Video Clip (2425 frames/01:37 min) [MPEG Video; 160x120 pix; 2.2M] [MPEG Video; 320x240 pix; 4.4Mb] [RealMedia; streaming; 33kps] [RealMedia; streaming; 200kps] This Video Clip was prepared from a "reportage" of the event at the ESO HQ that was transmitted in real-time to ESO-Chile via ESO's satellite link. It begins with some sequences of the first partial phase and the eclipse watchers. Clouds move over and the landscape darkens as the phase of totality approaches. The Sun is again visible at the very moment this phase ends. Some further sequences from the second partial phase follow. Produced by Herbert Zodet. Dire Forecasts The weather predictions in the days before the eclipse were not good for Munich and surroundings. A heavy front with rain and thick clouds that completely covered the sky moved across Bavaria the day before and the meteorologists predicted a 20% chance of seeing anything at all. On August 10, it seemed that the chances were best in France and in the western parts of Germany, and much less close to the Alps. This changed to the opposite during the night before the eclipse. Now the main concern in Munich was a weather front approaching from the west - would it reach this area before the eclipse? The better chances were then further east, nearer the Austrian border. Many people travelled back and forth along the German highways, many of which quickly became heavily congested. Preparations About 500 persons, mostly ESO staff with their families and friends, were present at the ESO HQ in the morning of August 11. Prior to the eclipse, they received information about the various aspects of solar eclipses and about the specific conditions of this one in the auditorium. Protective glasses were handed out and it was the idea that they would then follow the eclipse from outside. In view of the pessimistic weather forecasts, TV sets had been set up in two large rooms, but in the end most chose to watch the eclipse from the terasse in front of the cafeteria and from the area south of the building. Several telescopes were set up among the trees and on the adjoining field (just harvested). Clouds and Holes It was an unusual solar eclipse experience. Heavy clouds were passing by with sudden rainshowers, but fortunately there were also some holes with blue sky in between. While much of the first partial phase was visible through these, some really heavy clouds moved in a few minutes before the total phase, when the light had begun to fade. They drifted slowly - too slowly! - towards the east and the corona was never seen from the ESO HQ site. From here, the view towards the eclipsed Sun only cleared at the very instant of the second "diamond ring" phenomenon. This was beautiful, however, and evidently took most of the photographers by surprise, so very few, if any, photos were made of this memorable moment. Temperature Curve by Benoit Pirenne Temperature Curve on August 11 [JPEG: 646 x 395 pix - 35k] Measured by Benoit Pirenne - see also his meteorological webpage Nevertheless, the entire experience was fantastic - there were all the expected effects, the darkness, the cool air, the wind and the silence. It was very impressive indeed! And it was certainly a unique day in ESO history! Carolyn Collins Petersen from "Sky & Telescope" participated in the conference at ESO in the days before and watched the eclipse from the "Bürgerplatz" in Garching, about 1.5 km south of the ESO HQ. She managed to see part of the totality phase and filed some dramatic reports at the S&T Eclipse Expedition website. They describe very well the feelings of those in this area! Eclipse Photos Several members of the ESO staff went elsewhere and had more luck with the weather, especially at the moment of totality. Below are some of their impressive pictures. Eclipse Photo by Philippe Duhoux First "Diamond Ring" [JPEG: 400 x 292 pix - 34k] [JPEG: 800 x 583 pix - 144k] [JPEG: 2531 x 1846 pix - 1.3M] Eclipse Photo by Philippe Duhoux Totality [JPEG: 400 x 306 pix - 49k] [JPEG: 800 x 612 pix - 262k] [JPEG: 3039 x 1846 pix - 3.6M] Eclipse Photo by Philippe Duhoux Second "Diamond Ring" [JPEG: 400 x 301 pix - 34k] [JPEG: 800 x 601 pix - 163k] [JPEG: 2905 x 2181 pix - 2.0M] The Corona (Philippe Duhoux) "For the observation of the eclipse, I chose a field on a hill offering a wide view towards the western horizon and located about 10 kilometers north west of Garching." "While the partial phase was mostly cloudy, the sky went clear 3 minutes before the totality and remained so for about 15 minutes. Enough to enjoy the event!" "The images were taken on Agfa CT100 colour slide film with an Olympus OM-20 at the focus of a Maksutov telescope (f = 1000 mm, f/D = 10). The exposure times were automatically set by the camera. During the partial phase, I used an off-axis mask of 40 mm diameter with a mylar filter ND = 3.6, which I removed for the diamond rings and the corona." Note in particular the strong, detached protuberances to the right of the rim, particularly noticeable in the last photo. Eclipse Photo by Cyril Cavadore Totality [JPEG: 400 x 360 pix - 45k] [JPEG: 800 x 719 pix - 144k] [JPEG: 908 x 816 pix - 207k] The Corona (Cyril Cavadore) "We (C.Cavadore from ESO and L. Bernasconi and B. Gaillard from Obs. de la Cote d'Azur) took this photo in France at Vouzier (Champagne-Ardennes), between Reims and Nancy. A large blue opening developed in the sky at 10 o'clock and we decided to set up the telescope and the camera at that time. During the partial phase, a lot of clouds passed over, making it hard to focus properly. Nevertheless, 5 min before totality, a deep blue sky opened above us, allowing us to watch it and to take this picture. 5-10 Minutes after the totality, the sky was almost overcast up to the 4th contact". "The image was taken with a 2x2K (14 µm pixels) Thomson "homemade" CCD camera mounted on a CN212 Takahashi (200 mm diameter telescope) with a 1/10.000 neutral filter. The acquisition software set exposure time (2 sec) and took images in a complete automated way, allowing us to observe the eclipse by naked eye or with binoculars. To get as many images as possible during totality, we use binning 2x2 to reduce the readout time to 19 sec. Afterward, one of the best image was flat-fielded and processed with a special algorithm that modelled a fit the continuous component of the corona and then subtracted from the original image. The remaining details were enhanced by unsharp masking and added to the original image. Finally, gaussian histogram equalization was applied". Eclipse Photo by Eddy Pomaroli Second "Diamond Ring" [JPEG: 400 x 438 pix - 129k] [JPEG: 731 x 800 pix - 277k] [JPEG: 1940 x 2123 pix - 2.3M] Diamond Ring at ESO HQ (Eddy Pomaroli) "Despite the clouds, we saw the second "diamond ring" from the ESO HQ. In a sense, we were quite lucky, since the clouds were very heavy during the total phase and we might easily have missed it all!". "I used an old Minolta SRT-101 camera and a teleobjective (450 mm; f/8). The exposure was 1/125 sec on Kodak Elite 100 (pushed to 200 ASA). I had the feeling that the Sun would become visible and had the camera pointed, by good luck in the correct direction, as soon as the cloud moved away". Eclipse Photo by Roland Reiss First Partial Phase [JPEG: 400 x 330 pix - 94k] [JPEG: 800 x 660 pix - 492k] [JPEG: 3000 x 2475 pix - 4.5M] End of First Partial Phase (Roland Reiss) "I observed the eclipse from my home in Garching. The clouds kept moving and this was the last photo I was able to obtain during the first partial phase, before they blocked everything". "The photo is interesting, because it shows two more images of the eclipsed Sun, below the overexposed central part. In one of them, the remaining, narrow crescent is particularly well visible. They are caused by reflections in the camera. I used a Minolta camera and a Fuji colour slide film". Eclipse Spectra Some ESO people went a step further and obtained spectra of the Sun at the time of the eclipse. Eclipse Spectrum by Roland Reiss Coronal Spectrum [JPEG: 400 x 273 pix - 94k] [JPEG: 800 x 546 pix - 492k] [JPEG: 3000 x 2046 pix - 4.5M] Coronal Spectrum (CAOS Group) The Club of Amateurs in Optical Spectroscopy (with Carlos Guirao Sanchez, Gerardo Avila and Jesus Rodriguez) obtained a spectrum of the solar corona from a site in Garching, about 2 km south of the ESO HQ. "This is a plot of the spectrum and the corresponding CCD image that we took during the total eclipse. The main coronal lines are well visible and have been identified in the figure. Note in particular one at 6374 Angstrom that was first ascribed to the mysterious substance "Coronium". We now know that it is emitted by iron atoms that have lost nine electrons (Fe X)". The equipment was: * Telescope: Schmidt Cassegrain F/6.3; Diameter: 250 mm * FIASCO Spectrograph: Fibre: 135 micron core diameter F = 100 mm collimator, f = 80 mm camera; Grating: 1300 gr/mm blazed at 500 nm; SBIG ST8E CCD camera; Exposure time was 20 sec. Eclipse Spectrum by Bob Fosbury Chromospheric Spectrum [JPEG: 120 x 549 pix - 20k] Chromospheric and Coronal Spectra (Bob Fosbury) "The 11 August 1999 total solar eclipse was seen from a small farm complex called Wolfersberg in open fields some 20km ESE of the centre of Munich. It was chosen to be within the 2min band of totality but likely to be relatively unpopulated". "There were intermittent views of the Sun between first and second contact with quite a heavy rainshower which stopped 9min before totality. A large clear patch of sky revealed a perfect view of the Sun just 2min before second contact and it remained clear for at least half an hour after third contact". "The principal project was to photograph the spectrum of the chromosphere during totality using a transmission grating in front of a moderate telephoto lens. The desire to do this was stimulated by a view of the 1976 eclipse in Australia when I held the same grating up to the eclipsed Sun and was thrilled by the view of the emission line spectrum. The trick now was to get the exposure right!". "A sequence of 13 H-alpha images was combined into a looping movie. The exposure times were different, but some attempt has been made to equalise the intensities. The last two frames show the low chromosphere and then the photosphere emerging at 3rd contact. The [FeX] coronal line can be seen on the left in the middle of the sequence. I used a Hasselblad camera and Agfa slide film (RSX II 100)".

Processed Thematic Mapper Satellite Imagery for Selected Areas within the U.S.-Mexico Borderlands

USGS Publications Warehouse

Dohrenwend, John C.; Gray, Floyd; Miller, Robert J.

2000-01-01

The study is summarized in the Adobe Acrobat Portable Document Format (PDF) file OF00-309.PDF. This publication also contain satellite full-scene images of selected areas along the U.S.-Mexico border. These images are presented as high-resolution images in jpeg format (IMAGES). The folder LOCATIONS in contains TIFF images showing exact positions of easily-identified reference locations for each of the Landsat TM scenes located at least partly within the U.S. A reference location table (BDRLOCS.DOC in MS Word format) lists the latitude and longitude of each reference location with a nominal precision of 0.001 minute of arc

A modified JPEG-LS lossless compression method for remote sensing images

NASA Astrophysics Data System (ADS)

Deng, Lihua; Huang, Zhenghua

2015-12-01

As many variable length source coders, JPEG-LS is highly vulnerable to channel errors which occur in the transmission of remote sensing images. The error diffusion is one of the important factors which infect its robustness. The common method of improving the error resilience of JPEG-LS is dividing the image into many strips or blocks, and then coding each of them independently, but this method reduces the coding efficiency. In this paper, a block based JPEP-LS lossless compression method with an adaptive parameter is proposed. In the modified scheme, the threshold parameter RESET is adapted to an image and the compression efficiency is close to that of the conventional JPEG-LS.

JPEG2000 vs. full frame wavelet packet compression for smart card medical records.

PubMed

Leehan, Joaquín Azpirox; Lerallut, Jean-Francois

2006-01-01

This paper describes a comparison among different compression methods to be used in the context of electronic health records in the newer version of "smart cards". The JPEG2000 standard is compared to a full-frame wavelet packet compression method at high (33:1 and 50:1) compression rates. Results show that the full-frame method outperforms the JPEG2K standard qualitatively and quantitatively.

The impact of skull bone intensity on the quality of compressed CT neuro images

NASA Astrophysics Data System (ADS)

Kowalik-Urbaniak, Ilona; Vrscay, Edward R.; Wang, Zhou; Cavaro-Menard, Christine; Koff, David; Wallace, Bill; Obara, Boguslaw

2012-02-01

The increasing use of technologies such as CT and MRI, along with a continuing improvement in their resolution, has contributed to the explosive growth of digital image data being generated. Medical communities around the world have recognized the need for efficient storage, transmission and display of medical images. For example, the Canadian Association of Radiologists (CAR) has recommended compression ratios for various modalities and anatomical regions to be employed by lossy JPEG and JPEG2000 compression in order to preserve diagnostic quality. Here we investigate the effects of the sharp skull edges present in CT neuro images on JPEG and JPEG2000 lossy compression. We conjecture that this atypical effect is caused by the sharp edges between the skull bone and the background regions as well as between the skull bone and the interior regions. These strong edges create large wavelet coefficients that consume an unnecessarily large number of bits in JPEG2000 compression because of its bitplane coding scheme, and thus result in reduced quality at the interior region, which contains most diagnostic information in the image. To validate the conjecture, we investigate a segmentation based compression algorithm based on simple thresholding and morphological operators. As expected, quality is improved in terms of PSNR as well as the structural similarity (SSIM) image quality measure, and its multiscale (MS-SSIM) and informationweighted (IW-SSIM) versions. This study not only supports our conjecture, but also provides a solution to improve the performance of JPEG and JPEG2000 compression for specific types of CT images.

Image steganalysis using Artificial Bee Colony algorithm

NASA Astrophysics Data System (ADS)

Sajedi, Hedieh

2017-09-01

Steganography is the science of secure communication where the presence of the communication cannot be detected while steganalysis is the art of discovering the existence of the secret communication. Processing a huge amount of information takes extensive execution time and computational sources most of the time. As a result, it is needed to employ a phase of preprocessing, which can moderate the execution time and computational sources. In this paper, we propose a new feature-based blind steganalysis method for detecting stego images from the cover (clean) images with JPEG format. In this regard, we present a feature selection technique based on an improved Artificial Bee Colony (ABC). ABC algorithm is inspired by honeybees' social behaviour in their search for perfect food sources. In the proposed method, classifier performance and the dimension of the selected feature vector depend on using wrapper-based methods. The experiments are performed using two large data-sets of JPEG images. Experimental results demonstrate the effectiveness of the proposed steganalysis technique compared to the other existing techniques.

Lossless and lossy compression of quantitative phase images of red blood cells obtained by digital holographic imaging.

PubMed

Jaferzadeh, Keyvan; Gholami, Samaneh; Moon, Inkyu

2016-12-20

In this paper, we evaluate lossless and lossy compression techniques to compress quantitative phase images of red blood cells (RBCs) obtained by an off-axis digital holographic microscopy (DHM). The RBC phase images are numerically reconstructed from their digital holograms and are stored in 16-bit unsigned integer format. In the case of lossless compression, predictive coding of JPEG lossless (JPEG-LS), JPEG2000, and JP3D are evaluated, and compression ratio (CR) and complexity (compression time) are compared against each other. It turns out that JP2k can outperform other methods by having the best CR. In the lossy case, JP2k and JP3D with different CRs are examined. Because some data is lost in a lossy way, the degradation level is measured by comparing different morphological and biochemical parameters of RBC before and after compression. Morphological parameters are volume, surface area, RBC diameter, sphericity index, and the biochemical cell parameter is mean corpuscular hemoglobin (MCH). Experimental results show that JP2k outperforms JP3D not only in terms of mean square error (MSE) when CR increases, but also in compression time in the lossy compression way. In addition, our compression results with both algorithms demonstrate that with high CR values the three-dimensional profile of RBC can be preserved and morphological and biochemical parameters can still be within the range of reported values.

JPEG and wavelet compression of ophthalmic images

NASA Astrophysics Data System (ADS)

Eikelboom, Robert H.; Yogesan, Kanagasingam; Constable, Ian J.; Barry, Christopher J.

1999-05-01

This study was designed to determine the degree and methods of digital image compression to produce ophthalmic imags of sufficient quality for transmission and diagnosis. The photographs of 15 subjects, which inclined eyes with normal, subtle and distinct pathologies, were digitized to produce 1.54MB images and compressed to five different methods: (i) objectively by calculating the RMS error between the uncompressed and compressed images, (ii) semi-subjectively by assessing the visibility of blood vessels, and (iii) subjectively by asking a number of experienced observers to assess the images for quality and clinical interpretation. Results showed that as a function of compressed image size, wavelet compressed images produced less RMS error than JPEG compressed images. Blood vessel branching could be observed to a greater extent after Wavelet compression compared to JPEG compression produced better images then a JPEG compression for a given image size. Overall, it was shown that images had to be compressed to below 2.5 percent for JPEG and 1.7 percent for Wavelet compression before fine detail was lost, or when image quality was too poor to make a reliable diagnosis.

JPEG2000 and dissemination of cultural heritage over the Internet.

PubMed

Politou, Eugenia A; Pavlidis, George P; Chamzas, Christodoulos

2004-03-01

By applying the latest technologies in image compression for managing the storage of massive image data within cultural heritage databases and by exploiting the universality of the Internet we are now able not only to effectively digitize, record and preserve, but also to promote the dissemination of cultural heritage. In this work we present an application of the latest image compression standard JPEG2000 in managing and browsing image databases, focusing on the image transmission aspect rather than database management and indexing. We combine the technologies of JPEG2000 image compression with client-server socket connections and client browser plug-in, as to provide with an all-in-one package for remote browsing of JPEG2000 compressed image databases, suitable for the effective dissemination of cultural heritage.

JPEG2000 encoding with perceptual distortion control.

PubMed

Liu, Zhen; Karam, Lina J; Watson, Andrew B

2006-07-01

In this paper, a new encoding approach is proposed to control the JPEG2000 encoding in order to reach a desired perceptual quality. The new method is based on a vision model that incorporates various masking effects of human visual perception and a perceptual distortion metric that takes spatial and spectral summation of individual quantization errors into account. Compared with the conventional rate-based distortion minimization JPEG2000 encoding, the new method provides a way to generate consistent quality images at a lower bit rate.

Generalised Category Attack—Improving Histogram-Based Attack on JPEG LSB Embedding

NASA Astrophysics Data System (ADS)

Lee, Kwangsoo; Westfeld, Andreas; Lee, Sangjin

We present a generalised and improved version of the category attack on LSB steganography in JPEG images with straddled embedding path. It detects more reliably low embedding rates and is also less disturbed by double compressed images. The proposed methods are evaluated on several thousand images. The results are compared to both recent blind and specific attacks for JPEG embedding. The proposed attack permits a more reliable detection, although it is based on first order statistics only. Its simple structure makes it very fast.

Adaptive image coding based on cubic-spline interpolation

NASA Astrophysics Data System (ADS)

Jiang, Jian-Xing; Hong, Shao-Hua; Lin, Tsung-Ching; Wang, Lin; Truong, Trieu-Kien

2014-09-01

It has been investigated that at low bit rates, downsampling prior to coding and upsampling after decoding can achieve better compression performance than standard coding algorithms, e.g., JPEG and H. 264/AVC. However, at high bit rates, the sampling-based schemes generate more distortion. Additionally, the maximum bit rate for the sampling-based scheme to outperform the standard algorithm is image-dependent. In this paper, a practical adaptive image coding algorithm based on the cubic-spline interpolation (CSI) is proposed. This proposed algorithm adaptively selects the image coding method from CSI-based modified JPEG and standard JPEG under a given target bit rate utilizing the so called ρ-domain analysis. The experimental results indicate that compared with the standard JPEG, the proposed algorithm can show better performance at low bit rates and maintain the same performance at high bit rates.

A threshold-based fixed predictor for JPEG-LS image compression

NASA Astrophysics Data System (ADS)

Deng, Lihua; Huang, Zhenghua; Yao, Shoukui

2018-03-01

In JPEG-LS, fixed predictor based on median edge detector (MED) only detect horizontal and vertical edges, and thus produces large prediction errors in the locality of diagonal edges. In this paper, we propose a threshold-based edge detection scheme for the fixed predictor. The proposed scheme can detect not only the horizontal and vertical edges, but also diagonal edges. For some certain thresholds, the proposed scheme can be simplified to other existing schemes. So, it can also be regarded as the integration of these existing schemes. For a suitable threshold, the accuracy of horizontal and vertical edges detection is higher than the existing median edge detection in JPEG-LS. Thus, the proposed fixed predictor outperforms the existing JPEG-LS predictors for all images tested, while the complexity of the overall algorithm is maintained at a similar level.

LDPC-based iterative joint source-channel decoding for JPEG2000.

PubMed

Pu, Lingling; Wu, Zhenyu; Bilgin, Ali; Marcellin, Michael W; Vasic, Bane

2007-02-01

A framework is proposed for iterative joint source-channel decoding of JPEG2000 codestreams. At the encoder, JPEG2000 is used to perform source coding with certain error-resilience (ER) modes, and LDPC codes are used to perform channel coding. During decoding, the source decoder uses the ER modes to identify corrupt sections of the codestream and provides this information to the channel decoder. Decoding is carried out jointly in an iterative fashion. Experimental results indicate that the proposed method requires fewer iterations and improves overall system performance.

Demonstration of Inexact Computing Implemented in the JPEG Compression Algorithm using Probabilistic Boolean Logic applied to CMOS Components

DTIC Science & Technology

2015-12-24

Signal to Noise Ratio SPICE Simulation Program with Integrated Circuit Emphasis TIFF Tagged Image File Format USC University of Southern California xvii...sources can create errors in digital circuits. These effects can be simulated using Simulation Program with Integrated Circuit Emphasis ( SPICE ) or...compute summary statistics. 4.1 Circuit Simulations Noisy analog circuits can be simulated in SPICE or Cadence SpectreTM software via noisy voltage

ImageJ: Image processing and analysis in Java

NASA Astrophysics Data System (ADS)

Rasband, W. S.

2012-06-01

ImageJ is a public domain Java image processing program inspired by NIH Image. It can display, edit, analyze, process, save and print 8-bit, 16-bit and 32-bit images. It can read many image formats including TIFF, GIF, JPEG, BMP, DICOM, FITS and "raw". It supports "stacks", a series of images that share a single window. It is multithreaded, so time-consuming operations such as image file reading can be performed in parallel with other operations.

About a method for compressing x-ray computed microtomography data

NASA Astrophysics Data System (ADS)

Mancini, Lucia; Kourousias, George; Billè, Fulvio; De Carlo, Francesco; Fidler, Aleš

2018-04-01

The management of scientific data is of high importance especially for experimental techniques that produce big data volumes. Such a technique is x-ray computed tomography (CT) and its community has introduced advanced data formats which allow for better management of experimental data. Rather than the organization of the data and the associated meta-data, the main topic on this work is data compression and its applicability to experimental data collected from a synchrotron-based CT beamline at the Elettra-Sincrotrone Trieste facility (Italy) and studies images acquired from various types of samples. This study covers parallel beam geometry, but it could be easily extended to a cone-beam one. The reconstruction workflow used is the one currently in operation at the beamline. Contrary to standard image compression studies, this manuscript proposes a systematic framework and workflow for the critical examination of different compression techniques and does so by applying it to experimental data. Beyond the methodology framework, this study presents and examines the use of JPEG-XR in combination with HDF5 and TIFF formats providing insights and strategies on data compression and image quality issues that can be used and implemented at other synchrotron facilities and laboratory systems. In conclusion, projection data compression using JPEG-XR appears as a promising, efficient method to reduce data file size and thus to facilitate data handling and image reconstruction.

Volcanoes of the Wrangell Mountains and Cook Inlet region, Alaska: selected photographs

USGS Publications Warehouse

Neal, Christina A.; McGimsey, Robert G.; Diggles, Michael F.

2001-01-01

Alaska is home to more than 40 active volcanoes, many of which have erupted violently and repeatedly in the last 200 years. This CD-ROM contains 97 digitized color 35-mm images which represent a small fraction of thousands of photographs taken by Alaska Volcano Observatory scientists, other researchers, and private citizens. The photographs were selected to portray Alaska's volcanoes, to document recent eruptive activity, and to illustrate the range of volcanic phenomena observed in Alaska. These images are for use by the interested public, multimedia producers, desktop publishers, and the high-end printing industry. The digital images are stored in the 'images' folder and can be read across Macintosh, Windows, DOS, OS/2, SGI, and UNIX platforms with applications that can read JPG (JPEG - Joint Photographic Experts Group format) or PCD (Kodak's PhotoCD (YCC) format) files. Throughout this publication, the image numbers match among the file names, figure captions, thumbnail labels, and other references. Also included on this CD-ROM are Windows and Macintosh viewers and engines for keyword searches (Adobe Acrobat Reader with Search). At the time of this publication, Kodak's policy on the distribution of color-management files is still unresolved, and so none is included on this CD-ROM. However, using the Universal Ektachrome or Universal Kodachrome transforms found in your software will provide excellent color. In addition to PhotoCD (PCD) files, this CD-ROM contains large (14.2'x19.5') and small (4'x6') screen-resolution (72 dots per inch; dpi) images in JPEG format. These undergo downsizing and compression relative to the PhotoCD images.

Privacy protection in surveillance systems based on JPEG DCT baseline compression and spectral domain watermarking

NASA Astrophysics Data System (ADS)

Sablik, Thomas; Velten, Jörg; Kummert, Anton

2015-03-01

An novel system for automatic privacy protection in digital media based on spectral domain watermarking and JPEG compression is described in the present paper. In a first step private areas are detected. Therefore a detection method is presented. The implemented method uses Haar cascades to detects faces. Integral images are used to speed up calculations and the detection. Multiple detections of one face are combined. Succeeding steps comprise embedding the data into the image as part of JPEG compression using spectral domain methods and protecting the area of privacy. The embedding process is integrated into and adapted to JPEG compression. A Spread Spectrum Watermarking method is used to embed the size and position of the private areas into the cover image. Different methods for embedding regarding their robustness are compared. Moreover the performance of the method concerning tampered images is presented.

A novel high-frequency encoding algorithm for image compression

NASA Astrophysics Data System (ADS)

Siddeq, Mohammed M.; Rodrigues, Marcos A.

2017-12-01

In this paper, a new method for image compression is proposed whose quality is demonstrated through accurate 3D reconstruction from 2D images. The method is based on the discrete cosine transform (DCT) together with a high-frequency minimization encoding algorithm at compression stage and a new concurrent binary search algorithm at decompression stage. The proposed compression method consists of five main steps: (1) divide the image into blocks and apply DCT to each block; (2) apply a high-frequency minimization method to the AC-coefficients reducing each block by 2/3 resulting in a minimized array; (3) build a look up table of probability data to enable the recovery of the original high frequencies at decompression stage; (4) apply a delta or differential operator to the list of DC-components; and (5) apply arithmetic encoding to the outputs of steps (2) and (4). At decompression stage, the look up table and the concurrent binary search algorithm are used to reconstruct all high-frequency AC-coefficients while the DC-components are decoded by reversing the arithmetic coding. Finally, the inverse DCT recovers the original image. We tested the technique by compressing and decompressing 2D images including images with structured light patterns for 3D reconstruction. The technique is compared with JPEG and JPEG2000 through 2D and 3D RMSE. Results demonstrate that the proposed compression method is perceptually superior to JPEG with equivalent quality to JPEG2000. Concerning 3D surface reconstruction from images, it is demonstrated that the proposed method is superior to both JPEG and JPEG2000.

Color Facsimile.

DTIC Science & Technology

1995-02-01

modification of existing JPEG compression and decompression software available from Independent JPEG Users Group to process CIELAB color images and to use...externally specificed Huffman tables. In addition a conversion program was written to convert CIELAB color space images to red, green, blue color space

Estimated spectrum adaptive postfilter and the iterative prepost filtering algirighms

NASA Technical Reports Server (NTRS)

Linares, Irving (Inventor)

2004-01-01

The invention presents The Estimated Spectrum Adaptive Postfilter (ESAP) and the Iterative Prepost Filter (IPF) algorithms. These algorithms model a number of image-adaptive post-filtering and pre-post filtering methods. They are designed to minimize Discrete Cosine Transform (DCT) blocking distortion caused when images are highly compressed with the Joint Photographic Expert Group (JPEG) standard. The ESAP and the IPF techniques of the present invention minimize the mean square error (MSE) to improve the objective and subjective quality of low-bit-rate JPEG gray-scale images while simultaneously enhancing perceptual visual quality with respect to baseline JPEG images.

An efficient multiple exposure image fusion in JPEG domain

NASA Astrophysics Data System (ADS)

Hebbalaguppe, Ramya; Kakarala, Ramakrishna

2012-01-01

In this paper, we describe a method to fuse multiple images taken with varying exposure times in the JPEG domain. The proposed algorithm finds its application in HDR image acquisition and image stabilization for hand-held devices like mobile phones, music players with cameras, digital cameras etc. Image acquisition at low light typically results in blurry and noisy images for hand-held camera's. Altering camera settings like ISO sensitivity, exposure times and aperture for low light image capture results in noise amplification, motion blur and reduction of depth-of-field respectively. The purpose of fusing multiple exposures is to combine the sharp details of the shorter exposure images with high signal-to-noise-ratio (SNR) of the longer exposure images. The algorithm requires only a single pass over all images, making it efficient. It comprises of - sigmoidal boosting of shorter exposed images, image fusion, artifact removal and saturation detection. Algorithm does not need more memory than a single JPEG macro block to be kept in memory making it feasible to be implemented as the part of a digital cameras hardware image processing engine. The Artifact removal step reuses the JPEGs built-in frequency analysis and hence benefits from the considerable optimization and design experience that is available for JPEG.

Image acquisition system using on sensor compressed sampling technique

NASA Astrophysics Data System (ADS)

Gupta, Pravir Singh; Choi, Gwan Seong

2018-01-01

Advances in CMOS technology have made high-resolution image sensors possible. These image sensors pose significant challenges in terms of the amount of raw data generated, energy efficiency, and frame rate. This paper presents a design methodology for an imaging system and a simplified image sensor pixel design to be used in the system so that the compressed sensing (CS) technique can be implemented easily at the sensor level. This results in significant energy savings as it not only cuts the raw data rate but also reduces transistor count per pixel; decreases pixel size; increases fill factor; simplifies analog-to-digital converter, JPEG encoder, and JPEG decoder design; decreases wiring; and reduces the decoder size by half. Thus, CS has the potential to increase the resolution of image sensors for a given technology and die size while significantly decreasing the power consumption and design complexity. We show that it has potential to reduce power consumption by about 23% to 65%.

Teaching Resources

Science.gov Websites

& Legislation Links Discussion Lists Quick Links AAPT eMentoring ComPADRE Review of High School Take Physics" Poster Why Physics Poster Thumbnail Download normal resolution JPEG Download high resolution JPEG Download Spanish Version Recruiting Physics Students in High School (FED newsletter article

Visually Lossless JPEG 2000 for Remote Image Browsing

PubMed Central

Oh, Han; Bilgin, Ali; Marcellin, Michael

2017-01-01

Image sizes have increased exponentially in recent years. The resulting high-resolution images are often viewed via remote image browsing. Zooming and panning are desirable features in this context, which result in disparate spatial regions of an image being displayed at a variety of (spatial) resolutions. When an image is displayed at a reduced resolution, the quantization step sizes needed for visually lossless quality generally increase. This paper investigates the quantization step sizes needed for visually lossless display as a function of resolution, and proposes a method that effectively incorporates the resulting (multiple) quantization step sizes into a single JPEG2000 codestream. This codestream is JPEG2000 Part 1 compliant and allows for visually lossless decoding at all resolutions natively supported by the wavelet transform as well as arbitrary intermediate resolutions, using only a fraction of the full-resolution codestream. When images are browsed remotely using the JPEG2000 Interactive Protocol (JPIP), the required bandwidth is significantly reduced, as demonstrated by extensive experimental results. PMID:28748112

Random Walk Graph Laplacian-Based Smoothness Prior for Soft Decoding of JPEG Images.

PubMed

Liu, Xianming; Cheung, Gene; Wu, Xiaolin; Zhao, Debin

2017-02-01

Given the prevalence of joint photographic experts group (JPEG) compressed images, optimizing image reconstruction from the compressed format remains an important problem. Instead of simply reconstructing a pixel block from the centers of indexed discrete cosine transform (DCT) coefficient quantization bins (hard decoding), soft decoding reconstructs a block by selecting appropriate coefficient values within the indexed bins with the help of signal priors. The challenge thus lies in how to define suitable priors and apply them effectively. In this paper, we combine three image priors-Laplacian prior for DCT coefficients, sparsity prior, and graph-signal smoothness prior for image patches-to construct an efficient JPEG soft decoding algorithm. Specifically, we first use the Laplacian prior to compute a minimum mean square error initial solution for each code block. Next, we show that while the sparsity prior can reduce block artifacts, limiting the size of the overcomplete dictionary (to lower computation) would lead to poor recovery of high DCT frequencies. To alleviate this problem, we design a new graph-signal smoothness prior (desired signal has mainly low graph frequencies) based on the left eigenvectors of the random walk graph Laplacian matrix (LERaG). Compared with the previous graph-signal smoothness priors, LERaG has desirable image filtering properties with low computation overhead. We demonstrate how LERaG can facilitate recovery of high DCT frequencies of a piecewise smooth signal via an interpretation of low graph frequency components as relaxed solutions to normalized cut in spectral clustering. Finally, we construct a soft decoding algorithm using the three signal priors with appropriate prior weights. Experimental results show that our proposal outperforms the state-of-the-art soft decoding algorithms in both objective and subjective evaluations noticeably.

A Cosmic Baby-Boom

NASA Astrophysics Data System (ADS)

2005-09-01

Large Population of Galaxies Found in the Young Universe with ESO's VLT The Universe was a more fertile place soon after it was formed than has previously been suspected. A team of French and Italian astronomers [1] made indeed the surprising discovery of a large and unknown population of distant galaxies observed when the Universe was only 10 to 30% its present age. ESO PR Photo 29a/05 ESO PR Photo 29a/05 New Population of Distant Galaxies [Preview - JPEG: 400 x 424 pix - 191k] [Normal - JPEG: 800 x 847 pix - 449k] [HiRes - JPEG: 2269 x 2402 pix - 2.0M] ESO PR Photo 29b/05 ESO PR Photo 29b/05 Average Spectra of Distant Galaxies [Preview - JPEG: 400 x 506 pix - 141k] [Normal - JPEG: 800 x 1012 pix - 320k] This breakthrough is based on observations made with the Visible Multi-Object Spectrograph (VIMOS) as part of the VIMOS VLT Deep Survey (VVDS). The VVDS started early 2002 on Melipal, one of the 8.2-m telescopes of ESO's Very Large Telescope Array [2]. In a total sample of about 8,000 galaxies selected only on the basis of their observed brightness in red light, almost 1,000 bright and vigorously star forming galaxies were discovered that were formed between 9 and 12 billion years ago (i.e. about 1,500 to 4,500 million years after the Big Bang). "To our surprise, says Olivier Le Fèvre, from the Laboratoire d'Astrophysique de Marseille (France) and co-leader of the VVDS project, "this is two to six times higher than had been found previously. These galaxies had been missed because previous surveys had selected objects in a much more restrictive manner than we did. And they did so to accommodate the much lower efficiency of the previous generation of instruments." While observations and models have consistently indicated that the Universe had not yet formed many stars in the first billion years of cosmic time, the discovery announced today by scientists calls for a significant change in this picture. The astronomers indeed find that stars formed two to three times faster than previously estimated. "These observations will demand a profound reassessment of our theories of the formation and evolution of galaxies in a changing Universe", says Gianpaolo Vettolani, the other co-leader of the VVDS project, working at INAF-IRA in Bologna (Italy). These results are reported in the September 22 issue of the journal Nature (Le Fèvre et al., "A large population of galaxies 9 to 12 billion years back in the life of the Universe").

Overview of the JPEG XS objective evaluation procedures

NASA Astrophysics Data System (ADS)

Willème, Alexandre; Richter, Thomas; Rosewarne, Chris; Macq, Benoit

2017-09-01

JPEG XS is a standardization activity conducted by the Joint Photographic Experts Group (JPEG), formally known as ISO/IEC SC29 WG1 group that aims at standardizing a low-latency, lightweight and visually lossless video compression scheme. This codec is intended to be used in applications where image sequences would otherwise be transmitted or stored in uncompressed form, such as in live production (through SDI or IP transport), display links, or frame buffers. Support for compression ratios ranging from 2:1 to 6:1 allows significant bandwidth and power reduction for signal propagation. This paper describes the objective quality assessment procedures conducted as part of the JPEG XS standardization activity. Firstly, this paper discusses the objective part of the experiments that led to the technology selection during the 73th WG1 meeting in late 2016. This assessment consists of PSNR measurements after a single and multiple compression decompression cycles at various compression ratios. After this assessment phase, two proposals among the six responses to the CfP were selected and merged to form the first JPEG XS test model (XSM). Later, this paper describes the core experiments (CEs) conducted so far on the XSM. These experiments are intended to evaluate its performance in more challenging scenarios, such as insertion of picture overlays, robustness to frame editing, assess the impact of the different algorithmic choices, and also to measure the XSM performance using the HDR VDP metric.

Rate distortion optimal bit allocation methods for volumetric data using JPEG 2000.

PubMed

Kosheleva, Olga M; Usevitch, Bryan E; Cabrera, Sergio D; Vidal, Edward

2006-08-01

Computer modeling programs that generate three-dimensional (3-D) data on fine grids are capable of generating very large amounts of information. These data sets, as well as 3-D sensor/measured data sets, are prime candidates for the application of data compression algorithms. A very flexible and powerful compression algorithm for imagery data is the newly released JPEG 2000 standard. JPEG 2000 also has the capability to compress volumetric data, as described in Part 2 of the standard, by treating the 3-D data as separate slices. As a decoder standard, JPEG 2000 does not describe any specific method to allocate bits among the separate slices. This paper proposes two new bit allocation algorithms for accomplishing this task. The first procedure is rate distortion optimal (for mean squared error), and is conceptually similar to postcompression rate distortion optimization used for coding codeblocks within JPEG 2000. The disadvantage of this approach is its high computational complexity. The second bit allocation algorithm, here called the mixed model (MM) approach, mathematically models each slice's rate distortion curve using two distinct regions to get more accurate modeling at low bit rates. These two bit allocation algorithms are applied to a 3-D Meteorological data set. Test results show that the MM approach gives distortion results that are nearly identical to the optimal approach, while significantly reducing computational complexity.

Improved JPEG anti-forensics with better image visual quality and forensic undetectability.

PubMed

Singh, Gurinder; Singh, Kulbir

2017-08-01

There is an immediate need to validate the authenticity of digital images due to the availability of powerful image processing tools that can easily manipulate the digital image information without leaving any traces. The digital image forensics most often employs the tampering detectors based on JPEG compression. Therefore, to evaluate the competency of the JPEG forensic detectors, an anti-forensic technique is required. In this paper, two improved JPEG anti-forensic techniques are proposed to remove the blocking artifacts left by the JPEG compression in both spatial and DCT domain. In the proposed framework, the grainy noise left by the perceptual histogram smoothing in DCT domain can be reduced significantly by applying the proposed de-noising operation. Two types of denoising algorithms are proposed, one is based on the constrained minimization problem of total variation of energy and other on the normalized weighted function. Subsequently, an improved TV based deblocking operation is proposed to eliminate the blocking artifacts in the spatial domain. Then, a decalibration operation is applied to bring the processed image statistics back to its standard position. The experimental results show that the proposed anti-forensic approaches outperform the existing state-of-the-art techniques in achieving enhanced tradeoff between image visual quality and forensic undetectability, but with high computational cost. Copyright © 2017 Elsevier B.V. All rights reserved.

Digital cinema system using JPEG2000 movie of 8-million pixel resolution

NASA Astrophysics Data System (ADS)

Fujii, Tatsuya; Nomura, Mitsuru; Shirai, Daisuke; Yamaguchi, Takahiro; Fujii, Tetsuro; Ono, Sadayasu

2003-05-01

We have developed a prototype digital cinema system that can store, transmit and display extra high quality movies of 8-million pixel resolution, using JPEG2000 coding algorithm. The image quality is 4 times better than HDTV in resolution, and enables us to replace conventional films with digital cinema archives. Using wide-area optical gigabit IP networks, cinema contents are distributed and played back as a video-on-demand (VoD) system. The system consists of three main devices, a video server, a real-time JPEG2000 decoder, and a large-venue LCD projector. All digital movie data are compressed by JPEG2000 and stored in advance. The coded streams of 300~500 Mbps can be continuously transmitted from the PC server using TCP/IP. The decoder can perform the real-time decompression at 24/48 frames per second, using 120 parallel JPEG2000 processing elements. The received streams are expanded into 4.5Gbps raw video signals. The prototype LCD projector uses 3 pieces of 3840×2048 pixel reflective LCD panels (D-ILA) to show RGB 30-bit color movies fed by the decoder. The brightness exceeds 3000 ANSI lumens for a 300-inch screen. The refresh rate is chosen to 96Hz to thoroughly eliminate flickers, while preserving compatibility to cinema movies of 24 frames per second.

The Atacama Large Millimeter Array (ALMA)

NASA Astrophysics Data System (ADS)

1999-06-01

The Atacama Large Millimeter Array (ALMA) is the new name [2] for a giant millimeter-wavelength telescope project. As described in the accompanying joint press release by ESO and the U.S. National Science Foundation , the present design and development phase is now a Europe-U.S. collaboration, and may soon include Japan. ALMA may become the largest ground-based astronomy project of the next decade after VLT/VLTI, and one of the major new facilities for world astronomy. ALMA will make it possible to study the origins of galaxies, stars and planets. As presently envisaged, ALMA will be comprised of up to 64 12-meter diameter antennas distributed over an area 10 km across. ESO PR Photo 24a/99 shows an artist's concept of a portion of the array in a compact configuration. ESO PR Video Clip 03/99 illustrates how all the antennas will move in unison to point to a single astronomical object and follow it as it traverses the sky. In this way the combined telescope will produce astronomical images of great sharpness and sensitivity [3]. An exceptional site For such observations to be possible the atmosphere above the telescope must be transparent at millimeter and submillimeter wavelengths. This requires a site that is high and dry, and a high plateau in the Atacama desert of Chile, probably the world's driest, is ideal - the next best thing to outer space for these observations. ESO PR Photo 24b/99 shows the location of the chosen site at Chajnantor, at 5000 meters altitude and 60 kilometers east of the village of San Pedro de Atacama, as seen from the Space Shuttle during a servicing mission of the Hubble Space Telescope. ESO PR Photo 24c/99 and ESO PR Photo 24d/99 show a satellite image of the immediate vicinity and the site marked on a map of northern Chile. ALMA will be the highest continuously operated observatory in the world. The stark nature of this extreme site is well illustrated by the panoramic view in ESO PR Photo 24e/99. High sensitivity and sharp images ALMA will be extremely sensitive to radiation at milllimeter and submillimeter wavelengths. The large number of antennas gives a total collecting area of over 7000 square meters, larger than a football field. At the same time, the shape of the surface of each antenna must be extremely precise under all conditions; the overall accuracy over the entire 12-m diameter must be better than 0.025 millimeters (25µm), or one-third of the diameter of a human hair. The combination of large collecting area and high precision results in extremely high sensitivity to faint cosmic signals. The telescope must also be able to resolve the fine details of the objects it detects. In order to do this at millimeter wavelengths the effective diameter of the overall telescope must be very large - about 10 km. As it is impossible to build a single antenna with this diameter, an array of antennas is used instead, with the outermost antennas being 10 km apart. By combining the signals from all antennas together in a large central computer, it is possible to synthesize the effect of a single dish 10 km across. The resulting angular resolution is about 10 milli-arcseconds, less than one-thousandth the angular size of Saturn. Exciting research perspectives The scientific case for this revolutionary telescope is overwhelming. ALMA will make it possible to witness the formation of the earliest and most distant galaxies. It will also look deep into the dust-obscured regions where stars are born, to examine the details of star and planet formation. But ALMA will go far beyond these main science drivers, and will have a major impact on virtually all areas of astronomy. It will be a millimeter-wave counterpart to the most powerful optical/infrared telescopes such as ESO's Very Large Telescope (VLT) and the Hubble Space Telescope, with the additional advantage of being unhindered by cosmic dust opacity. The first galaxies in the Universe are expected to become rapidly enshrouded in the dust produced by the first stars. The dust can dim the galaxies at optical wavelengths, but the same dust radiates brightly at longer wavelengths. In addition, the expansion of the Universe causes the radiation from distant galaxies to be shifted to longer wavelengths. For both reasons, the earliest galaxies at the epoch of first light can be found with ALMA, and the subsequent evolution of galaxies can be mapped over cosmic time. ALMA will be of great importance for our understanding of the origins of stars and planetary systems. Stellar nurseries are completely obscured at optical wavelengths by dense "cocoons" of dust and gas, but ALMA can probe deep into these regions and study the fundamental processes by which stars are assembled. Moreover, it can observe the major reservoirs of biogenic elements (carbon, oxygen, nitrogen) and follow their incorporation into new planetary systems. A particularly exciting prospect for ALMA is to use its exceptionally sharp images to obtain evidence for planet formation by the presence of gaps in dusty disks around young stars, cleared by large bodies coalescing around the stars. Equally fundamental are observations of the dying gasps of stars at the other end of the stellar lifecycle, when they are often surrounded by shells of molecules and dust enriched in heavy elements produced by the nuclear fires now slowly dying. ALMA will offer exciting new views of our solar system. Studies of the molecular content of planetary atmospheres with ALMA's high resolving power will provide detailed weather maps of Mars, Jupiter, and the other planets and even their satellites. Studies of comets with ALMA will be particularly interesting. The molecular ices of these visitors from the outer reaches of the solar system have a composition that is preserved from ages when the solar system was forming. They evaporate when the comet comes close to the sun, and studies of the resulting gases with ALMA will allow accurate analysis of the chemistry of the presolar nebula. The road ahead The three-year design and development phase of the project is now underway as a collaboration between Europe and the U.S., and Japan may also join in this effort. Assuming the construction phase begins about two years from now, limited operations of the array may begin in 2005 and the full array may become operational by 2009. Notes [1] Press Releases about this event have also been issued by some of the other organisations participating in this project: * CNRS (in French) * MPG (in German) * NOVA (in Dutch) * NRAO * NSF (ASCII and HTML versions) * PPARC [2] "ALMA" means "soul" in Spanish. [3] Additional information about ALMA is available on the web: * Articles in the ESO Messenger - "The Large Southern Array" (March 1998), "European Site Testing at Chajnantor" (December 1998) and "The ALMA Project" (June 1999), cf. http://www.eso.org/gen-fac/pubs/messenger/ * ALMA website at ESO at http://www.eso.org/projects/alma/ * ALMA website at the U.S. National Radio Astronomy Observatory (NRAO) at http://www.mma.nrao.edu/ * ALMA website in The Netherlands about the detectors at http://www.sron.rug.nl/alma/ ALMA/Chajnantor Video Clip and Photos ESO PR Video Clip 03/99 [MPEG-version] ESO PR Video Clip 03/99 (2450 frames/1:38 min) [MPEG Video; 160x120 pix; 2.1Mb] [MPEG Video; 320x240 pix; 10.0Mb] [RealMedia; streaming; 700k] [RealMedia; streaming; 2.3M] About ESO Video Clip 03/99 : This video clip about the ALMA project contains two sequences. The first shows a panoramic scan of the Chajnantor plain from approx. north-east to north-west. The Chajnantor mountain passes through the field-of-view and the perfect cone of the Licancabur volcano (5900 m) on the Bolivian border is seen at the end (compare also with ESO PR 24e/99 below. The second is a 52-sec animation with a change of viewing perspective of the array and during which the antennas move in unison. For convenience, the clip is available in four versions: two MPEG files of different sizes and two streamer-versions of different quality that require RealPlayer software. There is no audio. Note that ESO Video News Reel No. 5 with more related scenes and in professional format with complete shot list is also available. ESO PR Photo 24b/99 ESO PR Photo 24b/99 [Preview - JPEG: 400 x 446 pix - 184k] [Normal - JPEG: 800 x 892 pix - 588k] [High-Res - JPEG: 3000 x 3345 pix - 5.4M] Caption to ESO PR Photo 24b/99 : View of Northern Chile, as seen from the NASA Space Shuttle during a servicing mission to the Hubble Space Telescope (partly visible to the left). The Atacama Desert, site of the ESO VLT at Paranal Observatory and the proposed location for ALMA at Chajnantor, is seen from North (foreground) to South. The two sites are only a few hundred km distant from each other. Few clouds are seen in this extremely dry area, due to the influence of the cold Humboldt Stream along the Chilean Pacific coast (right) and the high Andes mountains (left) that act as a barrier. Photo courtesy ESA astronaut Claude Nicollier. ESO PR Photo 24c/99 ESO PR Photo 24c/99 [Preview - JPEG: 400 x 318 pix - 212k] [Normal - JPEG: 800 x 635 pix - 700k] [High-Res - JPEG: 3000 x 2382 pix - 5.9M] Caption to ESO PR Photo 24c/99 : This satellite image of the Chajnantor area was produced in 1998 at Cornell University (USA), by Jennifer Yu, Jeremy Darling and Riccardo Giovanelli, using the Thematic Mapper data base maintained at the Geology Department laboratory directed by Bryan Isacks. It is a composite of three exposures in spectral bands at 1.6 µm (rendered as red), 1.0 µm (green) and 0.5 µm (blue). The horizontal resolution of the false-colour image is about 30 meters. North is at the top of the photo. ESO PR Photo 24d/99 ESO PR Photo 24d/99 [Preview - JPEG: 400 x 381 pix - 108k] [Normal - JPEG: 800 x 762 pix - 240k] [High-Res - JPEG: 2300 x 2191 pix - 984k] Caption to ESO PR Photo 24d/99 : Geographical map with the sites of the VLT and ALMA indicated. ESO PR Photo 24e/99 ESO PR Photo 24e/99 [Preview - JPEG: 400 x 238 pix - 93k] [Normal - JPEG: 800 x 475 pix - 279k] [High-Res - JPEG: 2862 x 1701 pix - 4.2M] Caption to ESO PR Photo 24e/99 : Panoramic view of the proposed site for ALMA at Chajnantor. This high-altitude plain (elevation 5000 m) in the Chilean Andes mountains is an ideal site for ALMA. In this view towards the north, the Chajnantor mountain (5600 m) is in the foreground, left of the centre. The perfect cone of the Licancabur volcano (5900 m) on the Bolivian border is in the background further to the left. This image is a wide-angle composite (140° x 70°) of three photos (Hasselblad 6x6 with SWC 1:4.5/38 mm Biogon), obtained in December 1998. How to obtain ESO Press Information ESO Press Information is made available on the World-Wide Web (URL: http://www.eso.org../ ). ESO Press Photos may be reproduced, if credit is given to the European Southern Observatory.

Efficient transmission of compressed data for remote volume visualization.

PubMed

Krishnan, Karthik; Marcellin, Michael W; Bilgin, Ali; Nadar, Mariappan S

2006-09-01

One of the goals of telemedicine is to enable remote visualization and browsing of medical volumes. There is a need to employ scalable compression schemes and efficient client-server models to obtain interactivity and an enhanced viewing experience. First, we present a scheme that uses JPEG2000 and JPIP (JPEG2000 Interactive Protocol) to transmit data in a multi-resolution and progressive fashion. The server exploits the spatial locality offered by the wavelet transform and packet indexing information to transmit, in so far as possible, compressed volume data relevant to the clients query. Once the client identifies its volume of interest (VOI), the volume is refined progressively within the VOI from an initial lossy to a final lossless representation. Contextual background information can also be made available having quality fading away from the VOI. Second, we present a prioritization that enables the client to progressively visualize scene content from a compressed file. In our specific example, the client is able to make requests to progressively receive data corresponding to any tissue type. The server is now capable of reordering the same compressed data file on the fly to serve data packets prioritized as per the client's request. Lastly, we describe the effect of compression parameters on compression ratio, decoding times and interactivity. We also present suggestions for optimizing JPEG2000 for remote volume visualization and volume browsing applications. The resulting system is ideally suited for client-server applications with the server maintaining the compressed volume data, to be browsed by a client with a low bandwidth constraint.

Codestream-Based Identification of JPEG 2000 Images with Different Coding Parameters

NASA Astrophysics Data System (ADS)

Watanabe, Osamu; Fukuhara, Takahiro; Kiya, Hitoshi

A method of identifying JPEG 2000 images with different coding parameters, such as code-block sizes, quantization-step sizes, and resolution levels, is presented. It does not produce false-negative matches regardless of different coding parameters (compression rate, code-block size, and discrete wavelet transform (DWT) resolutions levels) or quantization step sizes. This feature is not provided by conventional methods. Moreover, the proposed approach is fast because it uses the number of zero-bit-planes that can be extracted from the JPEG 2000 codestream by only parsing the header information without embedded block coding with optimized truncation (EBCOT) decoding. The experimental results revealed the effectiveness of image identification based on the new method.

On LSB Spatial Domain Steganography and Channel Capacity

DTIC Science & Technology

2008-03-21

reveal the hidden information should not be taken as proof that the image is now clean. The survivability of LSB type spatial domain steganography ...the mindset that JPEG compressing an image is sufficient to destroy the steganography for spatial domain LSB type stego. We agree that JPEGing...modeling of 2 bit LSB steganography shows that theoretically there is non-zero stego payload possible even though the image has been JPEGed. We wish to

Desert Pathfinder at Work

NASA Astrophysics Data System (ADS)

2005-09-01

The Atacama Pathfinder Experiment (APEX) project celebrates the inauguration of its outstanding 12-m telescope, located on the 5100m high Chajnantor plateau in the Atacama Desert (Chile). The APEX telescope, designed to work at sub-millimetre wavelengths, in the 0.2 to 1.5 mm range, passed successfully its Science Verification phase in July, and since then is performing regular science observations. This new front-line facility provides access to the "Cold Universe" with unprecedented sensitivity and image quality. After months of careful efforts to set up the telescope to work at the best possible technical level, those involved in the project are looking with satisfaction at the fruit of their labour: APEX is not only fully operational, it has already provided important scientific results. "The superb sensitivity of our detectors together with the excellence of the site allow fantastic observations that would not be possible with any other telescope in the world," said Karl Menten, Director of the group for Millimeter and Sub-Millimeter Astronomy at the Max-Planck-Institute for Radio Astronomy (MPIfR) and Principal Investigator of the APEX project. ESO PR Photo 30/05 ESO PR Photo 30/05 Sub-Millimetre Image of a Stellar Cradle [Preview - JPEG: 400 x 627 pix - 200k] [Normal - JPEG: 800 x 1254 pix - 503k] [Full Res - JPEG: 1539 x 2413 pix - 1.3M] Caption: ESO PR Photo 30/05 is an image of the giant molecular cloud G327 taken with APEX. More than 5000 spectra were taken in the J=3-2 line of the carbon monoxide molecule (CO), one of the best tracers of molecular clouds, in which star formation takes place. The bright peak in the north of the cloud is an evolved star forming region, where the gas is heated by a cluster of new stars. The most interesting region in the image is totally inconspicuous in CO: the G327 hot core, as seen in methanol contours. It is a truly exceptional source, and is one of the richest sources of emission from complex organic molecules in the Galaxy (see spectrum at bottom). Credit: Wyrowski et al. (map), Bisschop et al. (spectrum). Millimetre and sub-millimetre astronomy opens exciting new possibility in the study of the first galaxies to have formed in the Universe and of the formation processes of stars and planets. In particular, APEX allows astronomers to study the chemistry and physical conditions of molecular clouds, that is, dense regions of gas and dust in which new stars are forming. Among the first studies made with APEX, astronomers took a first glimpse deep into cradles of massive stars, observing for example the molecular cloud G327 and measuring significant emission in carbon monoxide and complex organic molecules (see ESO PR Photo 30/05). The official inauguration of the APEX telescope will start in San Pedro de Atacama on September, 25th. The Ambassadors in Chile of some of ESO's member states, the Intendente of the Chilean Region II, the Mayor of San Pedro, the Executive Director of the Chilean Science Agency (CONICYT), the Presidents of the Communities of Sequitor and Toconao, as well as representatives of the Ministry of Foreign Affairs and Universities in Chile, will join ESO's Director General, Dr. Catherine Cesarsky, the Chairman of the APEX Board and MPIfR director, Prof. Karl Menten, and the Director of the Onsala Space Observatory, Prof. Roy Booth, in a celebration that will be held in San Pedro de Atacama. The next day, the delegation will visit the APEX base camp in Sequitor, near San Pedro, from where the telescope is operated, as well as the APEX site on the 5100m high Llano de Chajnantor.

Compression strategies for LiDAR waveform cube

NASA Astrophysics Data System (ADS)

Jóźków, Grzegorz; Toth, Charles; Quirk, Mihaela; Grejner-Brzezinska, Dorota

2015-01-01

Full-waveform LiDAR data (FWD) provide a wealth of information about the shape and materials of the surveyed areas. Unlike discrete data that retains only a few strong returns, FWD generally keeps the whole signal, at all times, regardless of the signal intensity. Hence, FWD will have an increasingly well-deserved role in mapping and beyond, in the much desired classification in the raw data format. Full-waveform systems currently perform only the recording of the waveform data at the acquisition stage; the return extraction is mostly deferred to post-processing. Although the full waveform preserves most of the details of the real data, it presents a serious practical challenge for a wide use: much larger datasets compared to those from the classical discrete return systems. Atop the need for more storage space, the acquisition speed of the FWD may also limit the pulse rate on most systems that cannot store data fast enough, and thus, reduces the perceived system performance. This work introduces a waveform cube model to compress waveforms in selected subsets of the cube, aimed at achieving decreased storage while maintaining the maximum pulse rate of FWD systems. In our experiments, the waveform cube is compressed using classical methods for 2D imagery that are further tested to assess the feasibility of the proposed solution. The spatial distribution of airborne waveform data is irregular; however, the manner of the FWD acquisition allows the organization of the waveforms in a regular 3D structure similar to familiar multi-component imagery, as those of hyper-spectral cubes or 3D volumetric tomography scans. This study presents the performance analysis of several lossy compression methods applied to the LiDAR waveform cube, including JPEG-1, JPEG-2000, and PCA-based techniques. Wide ranges of tests performed on real airborne datasets have demonstrated the benefits of the JPEG-2000 Standard where high compression rates incur fairly small data degradation. In addition, the JPEG-2000 Standard-compliant compression implementation can be fast and, thus, used in real-time systems, as compressed data sequences can be formed progressively during the waveform data collection. We conclude from our experiments that 2D image compression strategies are feasible and efficient approaches, thus they might be applied during the acquisition of the FWD sensors.

History of the Universe Poster

Science.gov Websites

History of the Universe Poster You are free to use these images if you give credit to: Particle Data Group at Lawrence Berkeley National Lab. New Version (2014) History of the Universe Poster Download: JPEG version PDF version Old Version (2013) History of the Universe Poster Download: JPEG version

An FPGA-Based People Detection System

NASA Astrophysics Data System (ADS)

Nair, Vinod; Laprise, Pierre-Olivier; Clark, James J.

2005-12-01

This paper presents an FPGA-based system for detecting people from video. The system is designed to use JPEG-compressed frames from a network camera. Unlike previous approaches that use techniques such as background subtraction and motion detection, we use a machine-learning-based approach to train an accurate detector. We address the hardware design challenges involved in implementing such a detector, along with JPEG decompression, on an FPGA. We also present an algorithm that efficiently combines JPEG decompression with the detection process. This algorithm carries out the inverse DCT step of JPEG decompression only partially. Therefore, it is computationally more efficient and simpler to implement, and it takes up less space on the chip than the full inverse DCT algorithm. The system is demonstrated on an automated video surveillance application and the performance of both hardware and software implementations is analyzed. The results show that the system can detect people accurately at a rate of about[InlineEquation not available: see fulltext.] frames per second on a Virtex-II 2V1000 using a MicroBlaze processor running at[InlineEquation not available: see fulltext.], communicating with dedicated hardware over FSL links.

A high-throughput two channel discrete wavelet transform architecture for the JPEG2000 standard

NASA Astrophysics Data System (ADS)

Badakhshannoory, Hossein; Hashemi, Mahmoud R.; Aminlou, Alireza; Fatemi, Omid

2005-07-01

The Discrete Wavelet Transform (DWT) is increasingly recognized in image and video compression standards, as indicated by its use in JPEG2000. The lifting scheme algorithm is an alternative DWT implementation that has a lower computational complexity and reduced resource requirement. In the JPEG2000 standard two lifting scheme based filter banks are introduced: the 5/3 and 9/7. In this paper a high throughput, two channel DWT architecture for both of the JPEG2000 DWT filters is presented. The proposed pipelined architecture has two separate input channels that process the incoming samples simultaneously with minimum memory requirement for each channel. The architecture had been implemented in VHDL and synthesized on a Xilinx Virtex2 XCV1000. The proposed architecture applies DWT on a 2K by 1K image at 33 fps with a 75 MHZ clock frequency. This performance is achieved with 70% less resources than two independent single channel modules. The high throughput and reduced resource requirement has made this architecture the proper choice for real time applications such as Digital Cinema.

Embedding intensity image into a binary hologram with strong noise resistant capability

NASA Astrophysics Data System (ADS)

Zhuang, Zhaoyong; Jiao, Shuming; Zou, Wenbin; Li, Xia

2017-11-01

A digital hologram can be employed as a host image for image watermarking applications to protect information security. Past research demonstrates that a gray level intensity image can be embedded into a binary Fresnel hologram by error diffusion method or bit truncation coding method. However, the fidelity of the retrieved watermark image from binary hologram is generally not satisfactory, especially when the binary hologram is contaminated with noise. To address this problem, we propose a JPEG-BCH encoding method in this paper. First, we employ the JPEG standard to compress the intensity image into a binary bit stream. Next, we encode the binary bit stream with BCH code to obtain error correction capability. Finally, the JPEG-BCH code is embedded into the binary hologram. By this way, the intensity image can be retrieved with high fidelity by a BCH-JPEG decoder even if the binary hologram suffers from serious noise contamination. Numerical simulation results show that the image quality of retrieved intensity image with our proposed method is superior to the state-of-the-art work reported.

A Novel 2D Image Compression Algorithm Based on Two Levels DWT and DCT Transforms with Enhanced Minimize-Matrix-Size Algorithm for High Resolution Structured Light 3D Surface Reconstruction

NASA Astrophysics Data System (ADS)

Siddeq, M. M.; Rodrigues, M. A.

2015-09-01

Image compression techniques are widely used on 2D image 2D video 3D images and 3D video. There are many types of compression techniques and among the most popular are JPEG and JPEG2000. In this research, we introduce a new compression method based on applying a two level discrete cosine transform (DCT) and a two level discrete wavelet transform (DWT) in connection with novel compression steps for high-resolution images. The proposed image compression algorithm consists of four steps. (1) Transform an image by a two level DWT followed by a DCT to produce two matrices: DC- and AC-Matrix, or low and high frequency matrix, respectively, (2) apply a second level DCT on the DC-Matrix to generate two arrays, namely nonzero-array and zero-array, (3) apply the Minimize-Matrix-Size algorithm to the AC-Matrix and to the other high-frequencies generated by the second level DWT, (4) apply arithmetic coding to the output of previous steps. A novel decompression algorithm, Fast-Match-Search algorithm (FMS), is used to reconstruct all high-frequency matrices. The FMS-algorithm computes all compressed data probabilities by using a table of data, and then using a binary search algorithm for finding decompressed data inside the table. Thereafter, all decoded DC-values with the decoded AC-coefficients are combined in one matrix followed by inverse two levels DCT with two levels DWT. The technique is tested by compression and reconstruction of 3D surface patches. Additionally, this technique is compared with JPEG and JPEG2000 algorithm through 2D and 3D root-mean-square-error following reconstruction. The results demonstrate that the proposed compression method has better visual properties than JPEG and JPEG2000 and is able to more accurately reconstruct surface patches in 3D.

JPEG 2000 Encoding with Perceptual Distortion Control

NASA Technical Reports Server (NTRS)

Watson, Andrew B.; Liu, Zhen; Karam, Lina J.

2008-01-01

An alternative approach has been devised for encoding image data in compliance with JPEG 2000, the most recent still-image data-compression standard of the Joint Photographic Experts Group. Heretofore, JPEG 2000 encoding has been implemented by several related schemes classified as rate-based distortion-minimization encoding. In each of these schemes, the end user specifies a desired bit rate and the encoding algorithm strives to attain that rate while minimizing a mean squared error (MSE). While rate-based distortion minimization is appropriate for transmitting data over a limited-bandwidth channel, it is not the best approach for applications in which the perceptual quality of reconstructed images is a major consideration. A better approach for such applications is the present alternative one, denoted perceptual distortion control, in which the encoding algorithm strives to compress data to the lowest bit rate that yields at least a specified level of perceptual image quality. Some additional background information on JPEG 2000 is prerequisite to a meaningful summary of JPEG encoding with perceptual distortion control. The JPEG 2000 encoding process includes two subprocesses known as tier-1 and tier-2 coding. In order to minimize the MSE for the desired bit rate, a rate-distortion- optimization subprocess is introduced between the tier-1 and tier-2 subprocesses. In tier-1 coding, each coding block is independently bit-plane coded from the most-significant-bit (MSB) plane to the least-significant-bit (LSB) plane, using three coding passes (except for the MSB plane, which is coded using only one "clean up" coding pass). For M bit planes, this subprocess involves a total number of (3M - 2) coding passes. An embedded bit stream is then generated for each coding block. Information on the reduction in distortion and the increase in the bit rate associated with each coding pass is collected. This information is then used in a rate-control procedure to determine the contribution of each coding block to the output compressed bit stream.

Evaluation of the robustness of the preprocessing technique improving reversible compressibility of CT images: Tested on various CT examinations

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jeon, Chang Ho; Kim, Bohyoung; Gu, Bon Seung

2013-10-15

Purpose: To modify the preprocessing technique, which was previously proposed, improving compressibility of computed tomography (CT) images to cover the diversity of three dimensional configurations of different body parts and to evaluate the robustness of the technique in terms of segmentation correctness and increase in reversible compression ratio (CR) for various CT examinations.Methods: This study had institutional review board approval with waiver of informed patient consent. A preprocessing technique was previously proposed to improve the compressibility of CT images by replacing pixel values outside the body region with a constant value resulting in maximizing data redundancy. Since the technique wasmore » developed aiming at only chest CT images, the authors modified the segmentation method to cover the diversity of three dimensional configurations of different body parts. The modified version was evaluated as follows. In randomly selected 368 CT examinations (352 787 images), each image was preprocessed by using the modified preprocessing technique. Radiologists visually confirmed whether the segmented region covers the body region or not. The images with and without the preprocessing were reversibly compressed using Joint Photographic Experts Group (JPEG), JPEG2000 two-dimensional (2D), and JPEG2000 three-dimensional (3D) compressions. The percentage increase in CR per examination (CR{sub I}) was measured.Results: The rate of correct segmentation was 100.0% (95% CI: 99.9%, 100.0%) for all the examinations. The median of CR{sub I} were 26.1% (95% CI: 24.9%, 27.1%), 40.2% (38.5%, 41.1%), and 34.5% (32.7%, 36.2%) in JPEG, JPEG2000 2D, and JPEG2000 3D, respectively.Conclusions: In various CT examinations, the modified preprocessing technique can increase in the CR by 25% or more without concerning about degradation of diagnostic information.« less

Archive of Boomer seismic reflection data: collected during USGS Cruise 96CCT01, nearshore south central South Carolina coast, June 26 - July 1, 1996

USGS Publications Warehouse

Calderon, Karynna; Dadisman, Shawn V.; Kindinger, Jack G.; Flocks, James G.; Wiese, Dana S.

2003-01-01

This archive consists of marine seismic reflection profile data collected in four survey areas from southeast of Charleston Harbor to the mouth of the North Edisto River of South Carolina. These data were acquired June 26 - July 1, 1996, aboard the R/V G.K. Gilbert. Included here are data in a variety of formats including binary, American Standard Code for Information Interchange (ASCII), Hyper Text Markup Language (HTML), Portable Document Format (PDF), Rich Text Format (RTF), Graphics Interchange Format (GIF) and Joint Photographic Experts Group (JPEG) images, and shapefiles. Binary data are in Society of Exploration Geophysicists (SEG) SEG-Y format and may be downloaded for further processing or display. Reference maps and GIF images of the profiles may be viewed with a web browser. The Geographic Information Systems (GIS) map documents provided were created with Environmental Systems Research Institute (ESRI) GIS software ArcView 3.2 and 8.1.

BOREAS Level-0 C-130 Aerial Photography

NASA Technical Reports Server (NTRS)

Newcomer, Jeffrey A.; Dominguez, Roseanne; Hall, Forrest G. (Editor)

2000-01-01

For BOReal Ecosystem-Atmosphere Study (BOREAS), C-130 and other aerial photography was collected to provide finely detailed and spatially extensive documentation of the condition of the primary study sites. The NASA C-130 Earth Resources aircraft can accommodate two mapping cameras during flight, each of which can be fitted with 6- or 12-inch focal-length lenses and black-and-white, natural-color, or color-IR film, depending upon requirements. Both cameras were often in operation simultaneously, although sometimes only the lower resolution camera was deployed. When both cameras were in operation, the higher resolution camera was often used in a more limited fashion. The acquired photography covers the period of April to September 1994. The aerial photography was delivered as rolls of large format (9 x 9 inch) color transparency prints, with imagery from multiple missions (hundreds of prints) often contained within a single roll. A total of 1533 frames were collected from the C-130 platform for BOREAS in 1994. Note that the level-0 C-130 transparencies are not contained on the BOREAS CD-ROM set. An inventory file is supplied on the CD-ROM to inform users of all the data that were collected. Some photographic prints were made from the transparencies. In addition, BORIS staff digitized a subset of the tranparencies and stored the images in JPEG format. The CD-ROM set contains a small subset of the collected aerial photography that were the digitally scanned and stored as JPEG files for most tower and auxiliary sites in the NSA and SSA. See Section 15 for information about how to acquire additional imagery.

On-demand rendering of an oblique slice through 3D volumetric data using JPEG2000 client-server framework

NASA Astrophysics Data System (ADS)

Joshi, Rajan L.

2006-03-01

In medical imaging, the popularity of image capture modalities such as multislice CT and MRI is resulting in an exponential increase in the amount of volumetric data that needs to be archived and transmitted. At the same time, the increased data is taxing the interpretation capabilities of radiologists. One of the workflow strategies recommended for radiologists to overcome the data overload is the use of volumetric navigation. This allows the radiologist to seek a series of oblique slices through the data. However, it might be inconvenient for a radiologist to wait until all the slices are transferred from the PACS server to a client, such as a diagnostic workstation. To overcome this problem, we propose a client-server architecture based on JPEG2000 and JPEG2000 Interactive Protocol (JPIP) for rendering oblique slices through 3D volumetric data stored remotely at a server. The client uses the JPIP protocol for obtaining JPEG2000 compressed data from the server on an as needed basis. In JPEG2000, the image pixels are wavelet-transformed and the wavelet coefficients are grouped into precincts. Based on the positioning of the oblique slice, compressed data from only certain precincts is needed to render the slice. The client communicates this information to the server so that the server can transmit only relevant compressed data. We also discuss the use of caching on the client side for further reduction in bandwidth requirements. Finally, we present simulation results to quantify the bandwidth savings for rendering a series of oblique slices.

Building a Steganography Program Including How to Load, Process, and Save JPEG and PNG Files in Java

ERIC Educational Resources Information Center

Courtney, Mary F.; Stix, Allen

2006-01-01

Instructors teaching beginning programming classes are often interested in exercises that involve processing photographs (i.e., files stored as .jpeg). They may wish to offer activities such as color inversion, the color manipulation effects archived with pixel thresholding, or steganography, all of which Stevenson et al. [4] assert are sought by…

Application of reversible denoising and lifting steps with step skipping to color space transforms for improved lossless compression

NASA Astrophysics Data System (ADS)

Starosolski, Roman

2016-07-01

Reversible denoising and lifting steps (RDLS) are lifting steps integrated with denoising filters in such a way that, despite the inherently irreversible nature of denoising, they are perfectly reversible. We investigated the application of RDLS to reversible color space transforms: RCT, YCoCg-R, RDgDb, and LDgEb. In order to improve RDLS effects, we propose a heuristic for image-adaptive denoising filter selection, a fast estimator of the compressed image bitrate, and a special filter that may result in skipping of the steps. We analyzed the properties of the presented methods, paying special attention to their usefulness from a practical standpoint. For a diverse image test-set and lossless JPEG-LS, JPEG 2000, and JPEG XR algorithms, RDLS improves the bitrates of all the examined transforms. The most interesting results were obtained for an estimation-based heuristic filter selection out of a set of seven filters; the cost of this variant was similar to or lower than the transform cost, and it improved the average lossless JPEG 2000 bitrates by 2.65% for RDgDb and by over 1% for other transforms; bitrates of certain images were improved to a significantly greater extent.

Parallel design of JPEG-LS encoder on graphics processing units

NASA Astrophysics Data System (ADS)

Duan, Hao; Fang, Yong; Huang, Bormin

2012-01-01

With recent technical advances in graphic processing units (GPUs), GPUs have outperformed CPUs in terms of compute capability and memory bandwidth. Many successful GPU applications to high performance computing have been reported. JPEG-LS is an ISO/IEC standard for lossless image compression which utilizes adaptive context modeling and run-length coding to improve compression ratio. However, adaptive context modeling causes data dependency among adjacent pixels and the run-length coding has to be performed in a sequential way. Hence, using JPEG-LS to compress large-volume hyperspectral image data is quite time-consuming. We implement an efficient parallel JPEG-LS encoder for lossless hyperspectral compression on a NVIDIA GPU using the computer unified device architecture (CUDA) programming technology. We use the block parallel strategy, as well as such CUDA techniques as coalesced global memory access, parallel prefix sum, and asynchronous data transfer. We also show the relation between GPU speedup and AVIRIS block size, as well as the relation between compression ratio and AVIRIS block size. When AVIRIS images are divided into blocks, each with 64×64 pixels, we gain the best GPU performance with 26.3x speedup over its original CPU code.

Tampered Region Localization of Digital Color Images Based on JPEG Compression Noise

NASA Astrophysics Data System (ADS)

Wang, Wei; Dong, Jing; Tan, Tieniu

With the availability of various digital image edit tools, seeing is no longer believing. In this paper, we focus on tampered region localization for image forensics. We propose an algorithm which can locate tampered region(s) in a lossless compressed tampered image when its unchanged region is output of JPEG decompressor. We find the tampered region and the unchanged region have different responses for JPEG compression. The tampered region has stronger high frequency quantization noise than the unchanged region. We employ PCA to separate different spatial frequencies quantization noises, i.e. low, medium and high frequency quantization noise, and extract high frequency quantization noise for tampered region localization. Post-processing is involved to get final localization result. The experimental results prove the effectiveness of our proposed method.

Novel Algorithm for Classification of Medical Images

NASA Astrophysics Data System (ADS)

Bhushan, Bharat; Juneja, Monika

2010-11-01

Content-based image retrieval (CBIR) methods in medical image databases have been designed to support specific tasks, such as retrieval of medical images. These methods cannot be transferred to other medical applications since different imaging modalities require different types of processing. To enable content-based queries in diverse collections of medical images, the retrieval system must be familiar with the current Image class prior to the query processing. Further, almost all of them deal with the DICOM imaging format. In this paper a novel algorithm based on energy information obtained from wavelet transform for the classification of medical images according to their modalities is described. For this two types of wavelets have been used and have been shown that energy obtained in either case is quite distinct for each of the body part. This technique can be successfully applied to different image formats. The results are shown for JPEG imaging format.

Archive of chirp seismic reflection data collected during USGS cruises 00SCC02 and 00SCC04, Barataria Basin, Louisiana, May 12-31 and June 17-July 2, 2000

USGS Publications Warehouse

Calderon, Karynna; Dadisman, S.V.; Kindinger, J.L.; Flocks, J.G.; Wiese, D.S.; Kulp, Mark; Penland, Shea; Britsch, L.D.; Brooks, G.R.

2003-01-01

This archive consists of two-dimensional marine seismic reflection profile data collected in the Barataria Basin of southern Louisiana. These data were acquired in May, June, and July of 2000 aboard the R/V G.K. Gilbert. Included here are data in a variety of formats including binary, American Standard Code for Information Interchange (ASCII), Hyper-Text Markup Language (HTML), shapefiles, and Graphics Interchange Format (GIF) and Joint Photographic Experts Group (JPEG) images. Binary data are in Society of Exploration Geophysicists (SEG) SEG-Y format and may be downloaded for further processing or display. Reference maps and GIF images of the profiles may be viewed with a web browser. The Geographic Information Systems (GIS) information provided here is compatible with Environmental Systems Research Institute (ESRI) GIS software.

ALMA On the Move - ESO Awards Important Contract for the ALMA Project

NASA Astrophysics Data System (ADS)

2005-12-01

Only two weeks after awarding its largest-ever contract for the procurement of antennas for the Atacama Large Millimeter Array project (ALMA), ESO has signed a contract with Scheuerle Fahrzeugfabrik GmbH, a world-leader in the design and production of custom-built heavy-duty transporters, for the provision of two antenna transporting vehicles. These vehicles are of crucial importance for ALMA. ESO PR Photo 41a/05 ESO PR Photo 41a/05 The ALMA Transporter (Artist's Impression) [Preview - JPEG: 400 x 756 pix - 234k] [Normal - JPEG: 800 x 1512 pix - 700k] [Full Res - JPEG: 1768 x 3265 pix - 2.3M] Caption: Each of the ALMA transporters will be 10 m wide, 4.5 m high and 16 m long. "The timely awarding of this contract is most important to ensure that science operations can commence as planned," said ESO Director General Catherine Cesarsky. "This contract thus marks a further step towards the realization of the ALMA project." "These vehicles will operate in a most unusual environment and must live up to very strict demands regarding performance, reliability and safety. Meeting these requirements is a challenge for us, and we are proud to have been selected by ESO for this task," commented Hans-Jörg Habernegg, President of Scheuerle GmbH. ESO PR Photo 41b/05 ESO PR Photo 41b/05 Signing the Contract [Preview - JPEG: 400 x 572 pix - 234k] [Normal - JPEG: 800 x 1143 pix - 700k] [HiRes - JPEG: 4368 x 3056 pix - 2.3M] Caption: (left to right) Mr Thomas Riek, Vice-President of Scheuerle GmbH, Dr Catherine Cesarsky, ESO Director General and Mr Hans-Jörg Habernegg, President of Scheuerle GmbH. When completed on the high-altitude Chajnantor site in Chile, ALMA is expected to comprise more than 60 antennas, which can be placed in different locations on the plateau but which work together as one giant telescope. Changing the relative positions of the antennas and thus also the configuration of the array allows for different observing modes, comparable to using a zoom lens, offering different degrees of resolution and sky coverage as needed by the astronomers. The ALMA Antenna Transporters allow for moving the antennas between the different pre-defined antenna positions. They will also be used for transporting antennas between the maintenance area at 2900 m elevation and the "high site" at 5000 m above sea level, where the observations are carried out. Given their important functions, both for the scientific work and in transporting high-tech antennas with the required care, the vehicles must live up to very demanding operational requirements. Each transporter has a mass of 150 tonnes and is able to lift and transport antennas of 110 tonnes. They must be able to place the antennas on the docking pads with millimetric precision. At the same time, they must be powerful enough to climb 2000 m reliably and safely with their heavy and valuable load, putting extraordinary demands on the 500 kW diesel engines. This means negotiating a 28 km long high-altitude road with an average slope of 7 %. Finally, as they will be operated at an altitude with significantly reduced oxygen levels, a range of redundant safety devices protect both personnel and equipment from possible mishaps or accidents. The first transporter is scheduled to be delivered in the summer of 2007 to match the delivery of the first antennas to Chajnantor. The ESO contract has a value of approx. 5.5 m Euros.

Journal of Chemical Education on CD-ROM, 1999

NASA Astrophysics Data System (ADS)

1999-12-01

The Journal of Chemical Education on CD-ROM contains the text and graphics for all the articles, features, and reviews published in the Journal of Chemical Education. This 1999 issue of the JCE CD series includes all twelve issues of 1999, as well as all twelve issues from 1998 and from 1997, and the September-December issues from 1996. Journal of Chemical Education on CD-ROM is formatted so that all articles on the CD retain as much as possible of their original appearance. Each article file begins with an abstract/keyword page followed by the article pages. All pages of the Journal that contain editorial content, including the front covers, table of contents, letters, and reviews, are included. Also included are abstracts (when available), keywords for all articles, and supplementary materials. The Journal of Chemical Education on CD-ROM has proven to be a useful tool for chemical educators. Like the Computerized Index to the Journal of Chemical Education (1) it will help you to locate articles on a particular topic or written by a particular author. In addition, having the complete article on the CD-ROM provides added convenience. It is no longer necessary to go to the library, locate the Journal issue, and read it while sitting in an uncomfortable chair. With a few clicks of the mouse, you can scan an article on your computer monitor, print it if it proves interesting, and read it in any setting you choose. Searching and Linking JCE CD is fully searchable for any word, partial word, or phrase. Successful searches produce a listing of articles that contain the requested text. Individual articles can be quickly accessed from this list. The Table of Contents of each issue is linked to individual articles listed. There are also links from the articles to any supplementary materials. References in the Chemical Education Today section (found in the front of each issue) to articles elsewhere in the issue are also linked to the article, as are WWW addresses and email addresses. If you have Internet access and a WWW browser and email utility, you can go directly to the Web site or prepare to send a message with a single mouse click. Full-text searching of the entire CD enables you to find the articles you want. Price and Ordering An order form is inserted in this issue that provides prices and other ordering information. If this insert is not available or if you need additional information, contact: JCE Software, University of Wisconsin-Madison, 1101 University Avenue, Madison, WI 53706-1396; phone: 608/262-5153 or 800/991-5534; fax: 608/265-8094; email: jcesoft@chem.wisc.edu. Information about all our publications (including abstracts, descriptions, updates) is available from our World Wide Web site at: http://jchemed.chem.wisc.edu/JCESoft/. Hardware and Software Requirements Hardware and software requirements for JCE CD 1999 are listed in the table below: Literature Cited 1. Schatz, P. F. Computerized Index, Journal of Chemical Education; J. Chem. Educ. Software 1993, SP 5-M. Schatz, P. F.; Jacobsen, J. J. Computerized Index, Journal of Chemical Education; J. Chem. Educ. Software 1993, SP 5-W.

Mobile healthcare information management utilizing Cloud Computing and Android OS.

PubMed

Doukas, Charalampos; Pliakas, Thomas; Maglogiannis, Ilias

2010-01-01

Cloud Computing provides functionality for managing information data in a distributed, ubiquitous and pervasive manner supporting several platforms, systems and applications. This work presents the implementation of a mobile system that enables electronic healthcare data storage, update and retrieval using Cloud Computing. The mobile application is developed using Google's Android operating system and provides management of patient health records and medical images (supporting DICOM format and JPEG2000 coding). The developed system has been evaluated using the Amazon's S3 cloud service. This article summarizes the implementation details and presents initial results of the system in practice.

Adaptive intercolor error prediction coder for lossless color (rgb) picutre compression

NASA Astrophysics Data System (ADS)

Mann, Y.; Peretz, Y.; Mitchell, Harvey B.

2001-09-01

Most of the current lossless compression algorithms, including the new international baseline JPEG-LS algorithm, do not exploit the interspectral correlations that exist between the color planes in an input color picture. To improve the compression performance (i.e., lower the bit rate) it is necessary to exploit these correlations. A major concern is to find efficient methods for exploiting the correlations that, at the same time, are compatible with and can be incorporated into the JPEG-LS algorithm. One such algorithm is the method of intercolor error prediction (IEP), which when used with the JPEG-LS algorithm, results on average in a reduction of 8% in the overall bit rate. We show how the IEP algorithm can be simply modified and that it nearly doubles the size of the reduction in bit rate to 15%.

VIMOS - a Cosmology Machine for the VLT

NASA Astrophysics Data System (ADS)

2002-03-01

Successful Test Observations With Powerful New Instrument at Paranal [1] Summary One of the most fundamental tasks of modern astrophysics is the study of the evolution of the Universe . This is a daunting undertaking that requires extensive observations of large samples of objects in order to produce reasonably detailed maps of the distribution of galaxies in the Universe and to perform statistical analysis. Much effort is now being put into mapping the relatively nearby space and thereby to learn how the Universe looks today . But to study its evolution, we must compare this with how it looked when it still was young . This is possible, because astronomers can "look back in time" by studying remote objects - the larger their distance, the longer the light we now observe has been underway to us, and the longer is thus the corresponding "look-back time". This may sound easy, but it is not. Very distant objects are very dim and can only be observed with large telescopes. Looking at one object at a time would make such a study extremely time-consuming and, in practical terms, impossible. To do it anyhow, we need the largest possible telescope with a highly specialised, exceedingly sensitive instrument that is able to observe a very large number of (faint) objects in the remote universe simultaneously . The VLT VIsible Multi-Object Spectrograph (VIMOS) is such an instrument. It can obtain many hundreds of spectra of individual galaxies in the shortest possible time; in fact, in one special observing mode, up to 6400 spectra of the galaxies in a remote cluster during a single exposure, augmenting the data gathering power of the telescope by the same proportion. This marvellous science machine has just been installed at the 8.2-m MELIPAL telescope, the third unit of the Very Large Telescope (VLT) at the ESO Paranal Observatory. A main task will be to carry out 3-dimensional mapping of the distant Universe from which we can learn its large-scale structure . "First light" was achieved on February 26, 2002, and a first series of test observations has successfully demonstrated the huge potential of this amazing facility. Much work on VIMOS is still ahead during the coming months in order to put into full operation and fine-tune the most efficient "galaxy cruncher" in the world. VIMOS is the outcome of a fruitful collaboration between ESO and several research institutes in France and Italy, under the responsibility of the Laboratoire d'Astrophysique de Marseille (CNRS, France). The other partners in the "VIRMOS Consortium" are the Laboratoire d'Astrophysique de Toulouse, Observatoire Midi-Pyrénées, and Observatoire de Haute-Provence in France, and Istituto di Radioastronomia (Bologna), Istituto di Fisica Cosmica e Tecnologie Relative (Milano), Osservatorio Astronomico di Bologna, Osservatorio Astronomico di Brera (Milano) and Osservatorio Astronomico di Capodimonte (Naples) in Italy. PR Photo 09a/02 : VIMOS image of the Antennae Galaxies (centre). PR Photo 09b/02 : First VIMOS Multi-Object Spectrum (full field) PR Photo 09c/02 : The VIMOS instrument on VLT MELIPAL PR Photo 09d/02 : The VIMOS team at "First Light". PR Photo 09e/02 : "First Light" image of NGC 5364 PR Photo 09f/02 : Image of the Crab Nebula PR Photo 09g/02 : Image of spiral galaxy NGC 2613 PR Photo 09h/02 : Image of spiral galaxy Messier 100 PR Photo 09i/02 : Image of cluster of galaxies ACO 3341 PR Photo 09j/02 : Image of cluster of galaxies MS 1008.1-1224 PR Photo 09k/02 : Mask design for MOS exposure PR Photo 09l/02 : First VIMOS Multi-Object Spectrum (detail) PR Photo 09m/02 : Integrated Field Spectroscopy of central area of the "Antennae Galaxies" PR Photo 09n/02 : Integrated Field Spectroscopy of central area of the "Antennae Galaxies" (detail) Science with VIMOS ESO PR Photo 09a/02 ESO PR Photo 09a/02 [Preview - JPEG: 400 x 469 pix - 152k] [Normal - JPEG: 800 x 938 pix - 408k] ESO PR Photo 09b/02 ESO PR Photo 09b/02 [Preview - JPEG: 400 x 511 pix - 304k] [Normal - JPEG: 800 x 1022 pix - 728k] Caption : PR Photo 09a/02 : One of the first images from the new VIMOS facility, obtained right after the moment of "first light" on Ferbruary 26, 2002. It shows the famous "Antennae Galaxies" (NGC 4038/39), the result of a recent collision between two galaxies. As an immediate outcome of this dramatic event, stars are born within massive complexes that appear blue in this composite photo, based on exposures through green, orange and red optical filtres. PR Photo 09b/02 : Some of the first spectra of distant galaxies obtained with VIMOS in Multi-Object-Spectroscopy (MOS) mode. More than 220 galaxies were observed simultaneously, an unprecedented efficiency for such a "deep" exposure, reaching so far out in space. These spectra allow to obtain the redshift, a measure of distance, as well as to assess the physical status of the gas and stars in each of these galaxies. A part of this photo is enlarged as PR Photo 09l/02. Technical information about these photos is available below. Other "First Light" images from VIMOS are shown in the photo gallery below. The next in the long series of front-line instruments to be installed on the ESO Very Large Telescope (VLT), VIMOS (and its complementary, infrared-sensitive counterpart NIRMOS, now in the design stage) will allow mapping of the distribution of galaxies, clusters, and quasars during a time interval spanning more than 90% of the age of the universe. It will let us look back in time to a moment only ~1.5 billion years after the Big Bang (corresponding to a redshift of about 5). Like archaeologists, astronomers can then dig deep into those early ages when the first building blocks of galaxies were still in the process of formation. They will be able to determine when most of the star formation occurred in the universe and how it evolved with time. They will analyse how the galaxies cluster in space, and how this distribution varies with time. Such observations will put important constraints on evolution models, in particular on the average density of matter in the Universe. Mapping the distant universe requires to determine the distances of the enormous numbers of remote galaxies seen in deep pictures of the sky, adding depth - the third, indispensible dimension - to the photo. VIMOS offers this capability, and very efficiently. Multi-object spectroscopy is a technique by which many objects are observed simultaneously. VIMOS can observe the spectra of about 1000 galaxies in one exposure, from which redshifts, hence distances, can be measured [2]. The possibility to observe two galaxies at once would be equivalent to having a telescope twice the size of a VLT Unit Telescope. VIMOS thus effectively "increases" the size of the VLT hundreds of times. From these spectra, the stellar and gaseous content and internal velocities of galaxies can be infered, forming the base for detailed physical studies. At present the distances of only a few thousand galaxies and quasars have been measured in the distant universe. VIMOS aims at observing 100 times more, over one hundred thousand of those remote objects. This will form a solid base for unprecedented and detailed statistical studies of the population of galaxies and quasars in the very early universe. The international VIRMOS Consortium VIMOS is one of two major astronomical instruments to be delivered by the VIRMOS Consortium of French and Italian institutes under a contract signed in the summer of 1997 between the European Southern Observatory (ESO) and the French Centre National de la Recherche Scientifique (CNRS). The participating institutes are: in France: * Laboratoire d'Astrophysique de Marseille (LAM), Observatoire Marseille-Provence (project responsible) * Laboratoire d'Astrophysique de Toulouse, Observatoire Midi-Pyrénées * Observatoire de Haute-Provence (OHP) in Italy: * Istituto di Radioastronomia (IRA-CNR) (Bologna) * Istituto di Fisica Cosmica e Tecnologie Relative (IFCTR) (Milano) * Osservatorio Astronomico di Capodimonte (OAC) (Naples) * Osservatorio Astronomico di Bologna (OABo) * Osservatorio Astronomico di Brera (OABr) (Milano) VIMOS at the VLT: a unique and powerful combination ESO PR Photo 09c/02 ESO PR Photo 09c/02 [Preview - JPEG: 501 x 400 pix - 312k] [Normal - JPEG: 1002 x 800 pix - 840k] Caption : PR Photo 09c/02 shows the new VIMOS instrument on one of the Nasmyth platforms of the 8.2-m VLT MELIPAL telescope at Paranal. VIMOS is installed on the Nasmyth "Focus B" platform of the 8.2-m VLT MELIPAL telescope, cf. PR Photo 09c/02 . It may be compared to four multi-mode instruments of the FORS-type (cf. ESO PR 14/98 ), joined in one stiff structure. The construction of VIMOS has involved the production of large and complex optical elements and their integration in more than 30 remotely controlled, finely moving functions in the instrument. In the configuration employed for the "first light", VIMOS made use of two of its four channels. The two others will be put into operation in the next commissioning period during the coming months. However, VIMOS is already now the most efficient multi-object spectrograph in the world , with an equivalent (accumulated) slit length of up to 70 arcmin on the sky. VIMOS has a field-of-view as large as half of the full moon (14 x 16 arcmin 2 for the four quadrants), the largest sky field to be imaged so far by the VLT. It has excellent sensitivity in the blue region of the spectrum (about 60% more efficient than any other similar instruments in the ultraviolet band), and it is also very sensitive in all other visible spectral regions, all the way to the red limit. But the absolutely unique feature of VIMOS is its capability to take large numbers of spectra simultaneously , leading to exceedingly efficient use of the observing time. Up to about 1000 objects can be observed in a single exposure in multi-slit mode. And no less than 6400 spectra can be recorded with the Integral Field Unit , in which a closely packed fibre optics bundle can simultaneously observe a continuous sky area measuring no less than 56 x 56 arcsec 2. A dedicated machine, the Mask Manufacturing Unit (MMU) , cuts the slits for the entrance apertures of the spectrograph. The laser is capable of cutting 200 slits in less than 15 minutes. This facility was put into operation at Paranal by the VIRMOS Consortium already in August 2000 and has since been extensively used for observations with the FORS2 instrument; more details are available in ESO PR 19/99. Fast start-up of VIMOS at Paranal ESO PR Photo 09d/02 ESO PR Photo 09d/02 [Preview - JPEG: 473 x 400 pix - 280k] [Normal - JPEG: 946 x 1209 pix - 728k] ESO PR Photo 09e/02 ESO PR Photo 09e/02 [Preview - JPEG: 400 x 438 pix - 176k] [Normal - JPEG: 800 x 876 pix - 664k] Caption : PR Photo 09d/02 : The VIRMOS team in the MELIPAL control room, moments after "First Light" on February 26, 2002. From left to right: Oreste Caputi, Marco Scodeggio, Giovanni Sciarretta , Olivier Le Fevre, Sylvie Brau-Nogue, Christian Lucuix, Bianca Garilli, Markus Kissler-Patig (in front), Xavier Reyes, Michel Saisse, Luc Arnold and Guido Mancini . PR Photo 09e/02 : The spiral galaxy NGC 5364 was the first object to be observed by VIMOS. This false-colour near-infrared, raw "First Light" photo shows the extensive spiral arms. Technical information about this photo is available below. VIMOS was shipped from Observatoire de Haute-Provence (France) at the end of 2001, and reassembled at Paranal during a first period in January 2002. From mid-February, the instrument was made ready for installation on the VLT MELIPAL telescope; this happened on February 24, 2002. VIMOS saw "First Light" just two days later, on February 26, 2000, cf. PR Photo 09e/02 . During the same night, a number of excellent images were obtained of various objects, demonstrating the fine capabilities of the instrument in the "direct imaging"-mode. The first spectra were successfully taken during the night of March 2 - 3, 2002 . The slit masks that were used on this occasion were prepared with dedicated software that also optimizes the object selection, cf. PR Photo 09k/02 , and were then cut with the laser machine. From the first try on, the masks have been well aligned on the sky objects. The first observations with large numbers of spectra were obtained shortly thereafter. First accomplishments Images of nearby galaxies, clusters of galaxies, and distant galaxy fields were among the first to be obtained, using the VIMOS imaging mode and demonstrating the excellent efficiency of the instrument, various examples are shown below. The first observations of multi-spectra were performed in a selected sky field in which many faint galaxies are present; it is known as the "VIRMOS-VLT Deep Survey Field at 1000+02". Thanks to the excellent sensitivity of VIMOS, the spectra of galaxies as faint as (red) magnitude R = 23 (i.e. over 6 million times fainter than what can be perceived with the unaided eye) are visible on exposures lasting only 15 minutes. Some of the first observations with the Integral Field Unit were made of the core of the famous Antennae Galaxies (NGC 4038/39) . They will form the basis for a detailed map of the strong emission produced by the current, dramatic collision of the two galaxies. First Images and Spectra from VIMOS - a Gallery The following photos are from a collection of the first images and spectra obtained with VIMOS . See also PR Photos 09a/02 , 09b/02 and 09e/02 , reproduced above. Technical information about all of them is available below. ESO PR Photo 09f/02 ESO PR Photo 09f/02 [Preview - JPEG: 400 x 469 pix - 224k] [Normal - JPEG: 800 x 937 pix - 544k] [HiRes - JPEG: 2001 x 2343 pix - 3.6M] Caption : PR Photo 09f/02 : The Crab Nebula (Messier 1) , as observed by VIMOS. This well-known object is the remnant of a stellar explosion in the year 1054. ESO PR Photo 09g/02 ESO PR Photo 09g/02 [Preview - JPEG: 478 x 400 pix - 184k] [Normal - JPEG: 956 x 1209 pix - 416k] [HiRes - JPEG: 1801 x 1507 pix - 1.4M] Caption : PR Photo 09g/02 : VIMOS photo of NGC 2613 , a spiral galaxy that ressembles our own Milky Way. ESO PR Photo 09h/02 ESO PR Photo 09h/02 [Preview - JPEG: 400 x 469 pix - 152k] [Normal - JPEG: 800 x 938 pix - 440k] [HiRes - JPEG: 1800 x 2100 pix - 2.0M] Caption : PR Photo 09h/02 : Messier 100 is one of the largest and brightest spiral galaxies in the sky. ESO PR Photo 09i/02 ESO PR Photo 09i/02 [Preview - JPEG: 400 x 405 pix - 144k] [Normal - JPEG: 800 x 810 pix - 312k] Caption : PR Photo 09i/02 : The cluster of galaxies ACO 3341 is located at a distance of about 300 million light-years (redshift z = 0.037), i.e., comparatively nearby in cosmological terms. It contains a large number of galaxies of different size and brightness that are bound together by gravity. ESO PR Photo 09j/02 ESO PR Photo 09j/02 [Preview - JPEG: 447 x 400 pix - 200k] [Normal - JPEG: 893 x 800 pix - 472k] [HiRes - JPEG: 1562 x 1399 pix - 1.1M] Caption : PR Photo 09j/02 : The distant cluster of galaxies MS 1008.1-1224 is some 3 billion light-years distant (redshift z = 0.301). The galaxies in this cluster - that we observe as they were 3 billion years ago - are different from galaxies in our neighborhood; their stellar populations, on the average, are younger. ESO PR Photo 09k/02 ESO PR Photo 09k/02 [Preview - JPEG: 400 x 455 pix - 280k] [Normal - JPEG: 800 x 909 pix - 696k] Caption : PR Photo 09k/02 : Design of a Mask for Multi-Object Spectroscopy (MOS) observations with VIMOS. The mask serves to block, as far as possible, unwanted background light from the "night sky" (radiation from atoms and molecules in the Earth's upper atmosphere). During the set-up process for multi-object observations, the VIMOS software optimizes the position of the individual slits in the mask (one for each object for which a spectrum will be obtained) before these are cut. The photo shows an example of this fitting process, with the slit contours superposed on a short pre-exposure of the sky field to be observed. ESO PR Photo 09l/02 ESO PR Photo 09l/02 [Preview - JPEG: 470 x 400 pix - 200k] [Normal - JPEG: 939 x 800 pix - 464k] Caption : PR Photo 09l/02 : First Multi-Object Spectroscopy (MOS) observations with VIMOS; enlargement of a small part of the field shown in PR Photo 09b/02. The light from each galaxy passes through the dedicated slit in the mask (see PR Photo 09k/02 ) and produces a spectrum on the detector. Each vertical rectangle contains the spectrum of one galaxy that is located several billion light-years away. The horizontal lines are the strong emission from the "night sky" (radiation from atoms and molecules in the Earth's upper atmosphere), while the vertical traces are the spectral signatures of the galaxies. The full field contains the spectra of over 220 galaxies that were observed simultaneously, illustrating the great efficiency of this technique. Later, about 1000 spectra will be obtained in one exposure. ESO PR Photo 09m/02 ESO PR Photo 09m/02 [Preview - JPEG: 470 x 400 pix - 264k] [Normal - JPEG: 939 x 800 pix - 720k] Caption : PR Photo 09m/02 : was obtained with the Integral Field Spectroscopy mode of VIMOS. In one single exposure, more than 3000 spectra were taken of the central area of the Antennae Galaxies ( PR Photo 09a/02 ). ESO PR Photo 09n/02 ESO PR Photo 09n/02 [Preview - JPEG: 532 x 400 pix - 320k] [Normal - JPEG: 1063 x 800 pix - 864k] Caption : PR Photo 09n/02 : An enlargement of a small area in PR Photo 09m/02. This observation allows mapping of the distribution of elements like hydrogen (H) and sulphur (S II), for which the signatures are clearly identified in these spectra. The wavelength increases towards the top (arrow). Notes [1]: This is a joint Press Release of ESO , Centre National de la Recherche Scientifique (CNRS) in France, and Consiglio Nazionale delle Ricerche (CNR) and Istituto Nazionale di Astrofisica (INAF) in Italy. [2]: In astronomy, the redshift denotes the fraction by which the lines in the spectrum of an object are shifted towards longer wavelengths. The observed redshift of a distant galaxy gives a direct estimate of the apparent recession velocity as caused by the universal expansion. Since the expansion rate increases with distance, the velocity is itself a function (the Hubble relation) of the distance to the object. Technical information about the photos PR Photo 09a/01 : Composite VRI image of NGC 4038/39, obtained on 26 February 2002, in a bright sky (full moon). Individual exposures of 60 sec each; image quality 0.6 arcsec FWHM; the field measures 3.5 x 3.5 arcmin 2. North is up and East is left. PR Photo 09b/02 : MOS-spectra obtained with two quadrants totalling 221 slits + 6 reference objects (stars placed in square holes to ensure a correct alignment). Exposure time 15 min; LR(red) grism. This is the raw (unprocessed) image of the spectra. PR Photo 09e/02 : A 60 sec i exposure of NGC 5364 on February 26, 2002; image quality 0.6 arcsec FWHM; full moon; 3.5 x 3.5 arcmin 2 ; North is up and East is left. PR Photo 09f/02 : Composite VRI image of Messier 1, obtained on March 4, 2002. The individual exposures lasted 180 sec; image quality 0.7 arcsec FWHM; field 7 x 7 arcmin 2 ; North is up and East is left. PR Photo 09g/02 : Composite VRI image of NGC 2613, obtained on February 28, 2002. The individual exposures lasted 180 sec; image quality 0.7 arcsec FWHM; field 7 x 7 arcmin 2 ; North is up and East is left. PR Photo 09h/02 : Composite VRI image of Messier 100, obtained on March 3, 2002. The individual exposures lasted 180 sec, image quality 0.7 arcsec FWHM; field 7 x 7 arcmin 2 ; North is up and East is left. PR Photo 09i/02 : R-band image of galaxy cluster ACO 3341, obtained on March 4, 2002. Exposure 300 sec, image quality 0.5 arcsec FWHM;. field 7 x 7 arcmin 2 ; North is up and East is left. PR Photo 09j/02 : Composite VRI image of the distant cluster of galaxies MS 1008.1-1224. The individual exposures lasted 300 sec; image quality 0.8 arcsec FWHM; field 5 x 3 arcmin 2 ; North is to the right and East is up. PR Photo 09k/02 : Mask design made with the VMMPS tool, overlaying a pre-image. The selected objects are seen at the centre of the yellow squares, where a 1 arcsec slit is cut along the spatial X-axis. The rectangles in white represent the dispersion in wavelength of the spectra along the Y-axis. Masks are cut with the Mask Manufacturing Unit (MMU) built by the Virmos Consortium. PR Photo 09l/02 : Enlargement of a small area of PR Photo 09b/02. PR Photo 09m/02 : Spectra of the central area of NGC 4038/39, obtained with the Integral Field Unit on February 26, 2002. The exposure lasted 5 min and was made with the low resolution red grating. PR Photo 09m/02 : Zoom-in on small area of PR Photo 09m/02. The strong emission lines of hydrogen (H-alpha) and ionized sulphur (S II) are seen.

JPEG 2000-based compression of fringe patterns for digital holographic microscopy

NASA Astrophysics Data System (ADS)

Blinder, David; Bruylants, Tim; Ottevaere, Heidi; Munteanu, Adrian; Schelkens, Peter

2014-12-01

With the advent of modern computing and imaging technologies, digital holography is becoming widespread in various scientific disciplines such as microscopy, interferometry, surface shape measurements, vibration analysis, data encoding, and certification. Therefore, designing an efficient data representation technology is of particular importance. Off-axis holograms have very different signal properties with respect to regular imagery, because they represent a recorded interference pattern with its energy biased toward the high-frequency bands. This causes traditional images' coders, which assume an underlying 1/f2 power spectral density distribution, to perform suboptimally for this type of imagery. We propose a JPEG 2000-based codec framework that provides a generic architecture suitable for the compression of many types of off-axis holograms. This framework has a JPEG 2000 codec at its core, extended with (1) fully arbitrary wavelet decomposition styles and (2) directional wavelet transforms. Using this codec, we report significant improvements in coding performance for off-axis holography relative to the conventional JPEG 2000 standard, with Bjøntegaard delta-peak signal-to-noise ratio improvements ranging from 1.3 to 11.6 dB for lossy compression in the 0.125 to 2.00 bpp range and bit-rate reductions of up to 1.6 bpp for lossless compression.

A new JPEG-based steganographic algorithm for mobile devices

NASA Astrophysics Data System (ADS)

Agaian, Sos S.; Cherukuri, Ravindranath C.; Schneider, Erik C.; White, Gregory B.

2006-05-01

Currently, cellular phones constitute a significant portion of the global telecommunications market. Modern cellular phones offer sophisticated features such as Internet access, on-board cameras, and expandable memory which provide these devices with excellent multimedia capabilities. Because of the high volume of cellular traffic, as well as the ability of these devices to transmit nearly all forms of data. The need for an increased level of security in wireless communications is becoming a growing concern. Steganography could provide a solution to this important problem. In this article, we present a new algorithm for JPEG-compressed images which is applicable to mobile platforms. This algorithm embeds sensitive information into quantized discrete cosine transform coefficients obtained from the cover JPEG. These coefficients are rearranged based on certain statistical properties and the inherent processing and memory constraints of mobile devices. Based on the energy variation and block characteristics of the cover image, the sensitive data is hidden by using a switching embedding technique proposed in this article. The proposed system offers high capacity while simultaneously withstanding visual and statistical attacks. Based on simulation results, the proposed method demonstrates an improved retention of first-order statistics when compared to existing JPEG-based steganographic algorithms, while maintaining a capacity which is comparable to F5 for certain cover images.

Lossless data embedding for all image formats

NASA Astrophysics Data System (ADS)

Fridrich, Jessica; Goljan, Miroslav; Du, Rui

2002-04-01

Lossless data embedding has the property that the distortion due to embedding can be completely removed from the watermarked image without accessing any side channel. This can be a very important property whenever serious concerns over the image quality and artifacts visibility arise, such as for medical images, due to legal reasons, for military images or images used as evidence in court that may be viewed after enhancement and zooming. We formulate two general methodologies for lossless embedding that can be applied to images as well as any other digital objects, including video, audio, and other structures with redundancy. We use the general principles as guidelines for designing efficient, simple, and high-capacity lossless embedding methods for three most common image format paradigms - raw, uncompressed formats (BMP), lossy or transform formats (JPEG), and palette formats (GIF, PNG). We close the paper with examples of how the concept of lossless data embedding can be used as a powerful tool to achieve a variety of non-trivial tasks, including elegant lossless authentication using fragile watermarks. Note on terminology: some authors coined the terms erasable, removable, reversible, invertible, and distortion-free for the same concept.

A new security solution to JPEG using hyper-chaotic system and modified zigzag scan coding

NASA Astrophysics Data System (ADS)

Ji, Xiao-yong; Bai, Sen; Guo, Yu; Guo, Hui

2015-05-01

Though JPEG is an excellent compression standard of images, it does not provide any security performance. Thus, a security solution to JPEG was proposed in Zhang et al. (2014). But there are some flaws in Zhang's scheme and in this paper we propose a new scheme based on discrete hyper-chaotic system and modified zigzag scan coding. By shuffling the identifiers of zigzag scan encoded sequence with hyper-chaotic sequence and accurately encrypting the certain coefficients which have little relationship with the correlation of the plain image in zigzag scan encoded domain, we achieve high compression performance and robust security simultaneously. Meanwhile we present and analyze the flaws in Zhang's scheme through theoretical analysis and experimental verification, and give the comparisons between our scheme and Zhang's. Simulation results verify that our method has better performance in security and efficiency.

Perceptually-Based Adaptive JPEG Coding

NASA Technical Reports Server (NTRS)

Watson, Andrew B.; Rosenholtz, Ruth; Null, Cynthia H. (Technical Monitor)

1996-01-01

An extension to the JPEG standard (ISO/IEC DIS 10918-3) allows spatial adaptive coding of still images. As with baseline JPEG coding, one quantization matrix applies to an entire image channel, but in addition the user may specify a multiplier for each 8 x 8 block, which multiplies the quantization matrix, yielding the new matrix for the block. MPEG 1 and 2 use much the same scheme, except there the multiplier changes only on macroblock boundaries. We propose a method for perceptual optimization of the set of multipliers. We compute the perceptual error for each block based upon DCT quantization error adjusted according to contrast sensitivity, light adaptation, and contrast masking, and pick the set of multipliers which yield maximally flat perceptual error over the blocks of the image. We investigate the bitrate savings due to this adaptive coding scheme and the relative importance of the different sorts of masking on adaptive coding.

Compression of electromyographic signals using image compression techniques.

PubMed

Costa, Marcus Vinícius Chaffim; Berger, Pedro de Azevedo; da Rocha, Adson Ferreira; de Carvalho, João Luiz Azevedo; Nascimento, Francisco Assis de Oliveira

2008-01-01

Despite the growing interest in the transmission and storage of electromyographic signals for long periods of time, few studies have addressed the compression of such signals. In this article we present an algorithm for compression of electromyographic signals based on the JPEG2000 coding system. Although the JPEG2000 codec was originally designed for compression of still images, we show that it can also be used to compress EMG signals for both isotonic and isometric contractions. For EMG signals acquired during isometric contractions, the proposed algorithm provided compression factors ranging from 75 to 90%, with an average PRD ranging from 3.75% to 13.7%. For isotonic EMG signals, the algorithm provided compression factors ranging from 75 to 90%, with an average PRD ranging from 3.4% to 7%. The compression results using the JPEG2000 algorithm were compared to those using other algorithms based on the wavelet transform.

Lossless Compression of JPEG Coded Photo Collections.

PubMed

Wu, Hao; Sun, Xiaoyan; Yang, Jingyu; Zeng, Wenjun; Wu, Feng

2016-04-06

The explosion of digital photos has posed a significant challenge to photo storage and transmission for both personal devices and cloud platforms. In this paper, we propose a novel lossless compression method to further reduce the size of a set of JPEG coded correlated images without any loss of information. The proposed method jointly removes inter/intra image redundancy in the feature, spatial, and frequency domains. For each collection, we first organize the images into a pseudo video by minimizing the global prediction cost in the feature domain. We then present a hybrid disparity compensation method to better exploit both the global and local correlations among the images in the spatial domain. Furthermore, the redundancy between each compensated signal and the corresponding target image is adaptively reduced in the frequency domain. Experimental results demonstrate the effectiveness of the proposed lossless compression method. Compared to the JPEG coded image collections, our method achieves average bit savings of more than 31%.

High-speed low-complexity video coding with EDiCTius: a DCT coding proposal for JPEG XS

NASA Astrophysics Data System (ADS)

Richter, Thomas; Fößel, Siegfried; Keinert, Joachim; Scherl, Christian

2017-09-01

In its 71th meeting, the JPEG committee issued a call for low complexity, high speed image coding, designed to address the needs of low-cost video-over-ip applications. As an answer to this call, Fraunhofer IIS and the Computing Center of the University of Stuttgart jointly developed an embedded DCT image codec requiring only minimal resources while maximizing throughput on FPGA and GPU implementations. Objective and subjective tests performed for the 73rd meeting confirmed its excellent performance and suitability for its purpose, and it was selected as one of the two key contributions for the development of a joined test model. In this paper, its authors describe the design principles of the codec, provide a high-level overview of the encoder and decoder chain and provide evaluation results on the test corpus selected by the JPEG committee.

The Capodimonte Deep Field

NASA Astrophysics Data System (ADS)

2001-04-01

A Window towards the Distant Universe Summary The Osservatorio Astronomico Capodimonte Deep Field (OACDF) is a multi-colour imaging survey project that is opening a new window towards the distant universe. It is conducted with the ESO Wide Field Imager (WFI) , a 67-million pixel advanced camera attached to the MPG/ESO 2.2-m telescope at the La Silla Observatory (Chile). As a pilot project at the Osservatorio Astronomico di Capodimonte (OAC) [1], the OACDF aims at providing a large photometric database for deep extragalactic studies, with important by-products for galactic and planetary research. Moreover, it also serves to gather experience in the proper and efficient handling of very large data sets, preparing for the arrival of the VLT Survey Telescope (VST) with the 1 x 1 degree 2 OmegaCam facility. PR Photo 15a/01 : Colour composite of the OACDF2 field . PR Photo 15b/01 : Interacting galaxies in the OACDF2 field. PR Photo 15c/01 : Spiral galaxy and nebulous object in the OACDF2 field. PR Photo 15d/01 : A galaxy cluster in the OACDF2 field. PR Photo 15e/01 : Another galaxy cluster in the OACDF2 field. PR Photo 15f/01 : An elliptical galaxy in the OACDF2 field. The Capodimonte Deep Field ESO PR Photo 15a/01 ESO PR Photo 15a/01 [Preview - JPEG: 400 x 426 pix - 73k] [Normal - JPEG: 800 x 851 pix - 736k] [Hi-Res - JPEG: 3000 x 3190 pix - 7.3M] Caption : This three-colour image of about 1/4 of the Capodimonte Deep Field (OACDF) was obtained with the Wide-Field Imager (WFI) on the MPG/ESO 2.2-m telescope at the la Silla Observatory. It covers "OACDF Subfield no. 2 (OACDF2)" with an area of about 35 x 32 arcmin 2 (about the size of the full moon), and it is one of the "deepest" wide-field images ever obtained. Technical information about this photo is available below. With the comparatively few large telescopes available in the world, it is not possible to study the Universe to its outmost limits in all directions. Instead, astronomers try to obtain the most detailed information possible in selected viewing directions, assuming that what they find there is representative for the Universe as a whole. This is the philosophy behind the so-called "deep-field" projects that subject small areas of the sky to intensive observations with different telescopes and methods. The astronomers determine the properties of the objects seen, as well as their distances and are then able to obtain a map of the space within the corresponding cone-of-view (the "pencil beam"). Recent, successful examples of this technique are the "Hubble Deep Field" (cf. ESO PR Photo 26/98 ) and the "Chandra Deep Field" ( ESO PR 05/01 ). In this context, the Capodimonte Deep Field (OACDF) is a pilot research project, now underway at the Osservatorio Astronomico di Capodimonte (OAC) in Napoli (Italy). It is a multi-colour imaging survey performed with the Wide Field Imager (WFI) , a 67-million pixel (8k x 8k) digital camera that is installed at the 2.2-m MPG/ESO Telescope at ESO's La Silla Observatory in Chile. The scientific goal of the OACDF is to provide an important database for subsequent extragalactic, galactic and planetary studies. It will allow the astronomers at OAC - who are involved in the VLT Survey Telescope (VST) project - to gain insight into the processing (and use) of the large data flow from a camera similar to, but four times smaller than the OmegaCam wide-field camera that will be installed at the VST. The field selection for the OACDF was based on the following criteria: * There must be no stars brighter than about 9th magnitude in the field, in order to avoid saturation of the CCD detector and effects from straylight in the telescope and camera. No Solar System planets should be near the field during the observations; * It must be located far from the Milky Way plane (at high galactic latitude) in order to reduce the number of galactic stars seen in this direction; * It must be located in the southern sky in order to optimize observing conditions (in particular, the altitude of the field above the horizon), as seen from the La Silla and Paranal sites; * There should be little interstellar material in this direction that may obscure the view towards the distant Universe; * Observations in this field should have been made with the Hubble Space Telescope (HST) that may serve for comparison and calibration purposes. Based on these criteria, the astronomers selected a field measuring about 1 x 1 deg 2 in the southern constellation of Corvus (The Raven). This is now known as the Capodimonte Deep Field (OACDF) . The above photo ( PR Photo 15a/01 ) covers one-quarter of the full field (Subfield No. 2 - OACDF2) - some of the objects seen in this area are shown below in more detail. More than 35,000 objects have been found in this area; the faintest are nearly 100 million fainter than what can be perceived with the unaided eye in the dark sky. Selected objects in the Capodimonte Deep Field ESO PR Photo 15b/01 ESO PR Photo 15b/01 [Preview - JPEG: 400 x 435 pix - 60k] [Normal - JPEG: 800 x 870 pix - 738k] [Hi-Res - JPEG: 3000 x 3261 pix - 5.1M] Caption : Enlargement of the interacting galaxies that are seen in the upper left corner of the OACDF2 field shown in PR Photo 15a/01 . The enlargement covers 1250 x 1130 WFI pixels (1 pixel = 0.24 arcsec), or about 5.0 x 4.5 arcmin 2 in the sky. The lower spiral is itself an interactive double. ESO PR Photo 15c/01 ESO PR Photo 15c/01 [Preview - JPEG: 557 x 400 pix - 93k] [Normal - JPEG: 1113 x 800 pix - 937k] [Hi-Res - JPEG: 3000 x 2156 pix - 4.0M] Caption : Enlargement of a spiral galaxy and a nebulous object in this area. The field shown covers 1250 x 750 pixels, or about 5 x 3 arcmin 2 in the sky. Note the very red objects next to the two bright stars in the lower-right corner. The colours of these objects are consistent with those of spheroidal galaxies at intermediate distances (redshifts). ESO PR Photo 15d/01 ESO PR Photo 15d/01 [Preview - JPEG: 400 x 530 pix - 68k] [Normal - JPEG: 800 x 1060 pix - 870k] [Hi-Res - JPEG: 2768 x 3668 pix - 6.2M] Caption : A further enlargement of a galaxy cluster of which most members are located in the north-east quadrant (upper left) and have a reddish colour. The nebulous object to the upper left is a dwarf galaxy of spheroidal shape. The red object, located near the centre of the field and resembling a double star, is very likely a gravitational lens [2]. Some of the very red, point-like objects in the field may be distant quasars, very-low mass stars or, possibly, relatively nearby brown dwarf stars. The field shown covers 1380 x 1630 pixels, or 5.5 x 6.5 arcmin 2. ESO PR Photo 15e/01 ESO PR Photo 15e/01 [Preview - JPEG: 400 x 418 pix - 56k] [Normal - JPEG: 800 x 835 pix - 700k] [Hi-Res - JPEG: 3000 x 3131 pix - 5.0M] Caption : Enlargement of a moderately distant galaxy cluster in the south-east quadrant (lower left) of the OACDF2 field. The field measures 1380 x 1260 pixels, or about 5.5 x 5.0 arcmin 2 in the sky. ESO PR Photo 15f/01 ESO PR Photo 15f/01 [Preview - JPEG: 449 x 400 pix - 68k] [Normal - JPEG: 897 x 800 pix - 799k] [Hi-Res - JPEG: 3000 x 2675 pix - 5.6M] Caption : Enlargement of the elliptical galaxy that is located to the west (right) in the OACDF2 field. The numerous tiny objects surrounding the galaxy may be globular clusters. The fuzzy object on the right edge of the field may be a dwarf spheroidal galaxy. The size of the field is about 6 x 5 arcmin 2. Technical Information about the OACDF Survey The observations for the OACDF project were performed in three different ESO periods (18-22 April 1999, 7-12 March 2000 and 26-30 April 2000). Some 100 Gbyte of raw data were collected during each of the three observing runs. The first OACDF run was done just after the commissioning of the ESO-WFI. The observational strategy was to perform a 1 x 1 deg 2 short-exposure ("shallow") survey and then a 0.5 x 1 deg 2 "deep" survey. The shallow survey was performed in the B, V, R and I broad-band filters. Four adjacent 30 x 30 arcmin 2 fields, together covering a 1 x 1 deg 2 field in the sky, were observed for the shallow survey. Two of these fields were chosen for the 0.5 x 1 deg 2 deep survey; OACDF2 shown above is one of these. The deep survey was performed in the B, V, R broad-bands and in other intermediate-band filters. The OACDF data are fully reduced and the catalogue extraction has started. A two-processor (500 Mhz each) DS20 machine with 100 Gbyte of hard disk, specifically acquired at the OAC for WFI data reduction, was used. The detailed guidelines of the data reduction, as well as the catalogue extraction, are reported in a research paper that will appear in the European research journal Astronomy & Astrophysics . Notes [1]: The team members are: Massimo Capaccioli, Juan M. Alcala', Roberto Silvotti, Magda Arnaboldi, Vincenzo Ripepi, Emanuella Puddu, Massimo Dall'Ora, Giuseppe Longo and Roberto Scaramella . [2]: This is a preliminary result by Juan Alcala', Massimo Capaccioli, Giuseppe Longo, Mikhail Sazhin, Roberto Silvotti and Vincenzo Testa , based on recent observations with the Telescopio Nazionale Galileo (TNG) which show that the spectra of the two objects are identical. Technical information about the photos PR Photo 15a/01 has been obtained by the combination of the B, V, and R stacked images of the OACDF2 field. The total exposure times in the three bands are 2 hours in B and V (12 ditherings of 10 min each were stacked to produce the B and V images) and 3 hours in R (13 ditherings of 15 min each). The mosaic images in the B and V bands were aligned relative to the R-band image and adjusted to a logarithmic intensity scale prior to the combination. The typical seeing was of the order of 1 arcsec in each of the three bands. Preliminary estimates of the three-sigma limiting magnitudes in B, V and R indicate 25.5, 25.0 and 25.0, respectively. More than 35,000 objects are detected above the three-sigma level. PR Photos 15b-f/01 display selected areas of the field shown in PR Photo 15a/01 at the original WFI scale, hereby also demonstrating the enormous amount of information contained in these wide-field images. In all photos, North is up and East is left.

An Implementation of Privacy Protection for a Surveillance Camera Using ROI Coding of JPEG2000 with Face Detection

NASA Astrophysics Data System (ADS)

Muneyasu, Mitsuji; Odani, Shuhei; Kitaura, Yoshihiro; Namba, Hitoshi

On the use of a surveillance camera, there is a case where privacy protection should be considered. This paper proposes a new privacy protection method by automatically degrading the face region in surveillance images. The proposed method consists of ROI coding of JPEG2000 and a face detection method based on template matching. The experimental result shows that the face region can be detected and hidden correctly.

Illumination-tolerant face verification of low-bit-rate JPEG2000 wavelet images with advanced correlation filters for handheld devices

NASA Astrophysics Data System (ADS)

Wijaya, Surya Li; Savvides, Marios; Vijaya Kumar, B. V. K.

2005-02-01

Face recognition on mobile devices, such as personal digital assistants and cell phones, is a big challenge owing to the limited computational resources available to run verifications on the devices themselves. One approach is to transmit the captured face images by use of the cell-phone connection and to run the verification on a remote station. However, owing to limitations in communication bandwidth, it may be necessary to transmit a compressed version of the image. We propose using the image compression standard JPEG2000, which is a wavelet-based compression engine used to compress the face images to low bit rates suitable for transmission over low-bandwidth communication channels. At the receiver end, the face images are reconstructed with a JPEG2000 decoder and are fed into the verification engine. We explore how advanced correlation filters, such as the minimum average correlation energy filter [Appl. Opt. 26, 3633 (1987)] and its variants, perform by using face images captured under different illumination conditions and encoded with different bit rates under the JPEG2000 wavelet-encoding standard. We evaluate the performance of these filters by using illumination variations from the Carnegie Mellon University's Pose, Illumination, and Expression (PIE) face database. We also demonstrate the tolerance of these filters to noisy versions of images with illumination variations.

Digitized hand-wrist radiographs: comparison of subjective and software-derived image quality at various compression ratios.

PubMed

McCord, Layne K; Scarfe, William C; Naylor, Rachel H; Scheetz, James P; Silveira, Anibal; Gillespie, Kevin R

2007-05-01

The objectives of this study were to compare the effect of JPEG 2000 compression of hand-wrist radiographs on observer image quality qualitative assessment and to compare with a software-derived quantitative image quality index. Fifteen hand-wrist radiographs were digitized and saved as TIFF and JPEG 2000 images at 4 levels of compression (20:1, 40:1, 60:1, and 80:1). The images, including rereads, were viewed by 13 orthodontic residents who determined the image quality rating on a scale of 1 to 5. A quantitative analysis was also performed by using a readily available software based on the human visual system (Image Quality Measure Computer Program, version 6.2, Mitre, Bedford, Mass). ANOVA was used to determine the optimal compression level (P < or =.05). When we compared subjective indexes, JPEG compression greater than 60:1 significantly reduced image quality. When we used quantitative indexes, the JPEG 2000 images had lower quality at all compression ratios compared with the original TIFF images. There was excellent correlation (R2 >0.92) between qualitative and quantitative indexes. Image Quality Measure indexes are more sensitive than subjective image quality assessments in quantifying image degradation with compression. There is potential for this software-based quantitative method in determining the optimal compression ratio for any image without the use of subjective raters.

Two VLT 8.2-m Unit Telescopes in Action

NASA Astrophysics Data System (ADS)

1999-04-01

Visitors at ANTU - Astronomical Images from KUEYEN The VLT Control Room at the Paranal Observatory is becoming a busy place indeed. From here, two specialist teams of ESO astronomers and engineers now operate two VLT 8.2-m Unit Telescopes in parallel, ANTU and KUEYEN (formerly UT1 and UT2, for more information about the naming and the pronunciation, see ESO Press Release 06/99 ). Regular science observations have just started with the first of these giant telescopes, while impressive astronomical images are being obtained with the second. The work is hard, but the mood in the control room is good. Insiders claim that there have even been occasions on which the groups have had a friendly "competition" about which telescope makes the "best" images! The ANTU-team has worked with the FORS multi-mode instrument , their colleagues at KUEYEN use the VLT Test Camera for the ongoing tests of this new telescope. While the first is a highly developed astronomical instrument with a large-field CCD imager (6.8 x 6.8 arcmin 2 in the normal mode; 3.4 x 3.4 arcmin 2 in the high-resolution mode), the other is a less complex CCD camera with a smaller field (1.5 x 1.5 arcmin 2 ), suited to verify the optical performance of the telescope. As these images demonstrate, the performance of the second VLT Unit Telescope is steadily improving and it may not be too long before its optical quality will approach that of the first. First KUEYEN photos of stars and galaxies We present here some of the first astronomical images, taken with the second telescope, KUEYEN, in late March and early April 1999. They reflect the current status of the optical, electronic and mechanical systems, still in the process of being tuned. As expected, the experience gained from ANTU last year has turned out to be invaluable and has allowed good progress during this extremely delicate process. ESO PR Photo 19a/99 ESO PR Photo 19a/99 [Preview - JPEG: 400 x 433 pix - 160k] [Normal - JPEG: 800 x 866 pix - 457k] [High-Res - JPEG: 1985 x 2148 pix - 2.0M] ESO PR Photo 19b/99 ESO PR Photo 19b/99 [Preview - JPEG: 400 x 478 pix - 165k] [Normal - JPEG: 800 x 956 pix - 594k] [High-Res - JPEG: 3000 x 3583 pix - 7.1M] Caption to PR Photo 19a/99 : This photo was obtained with VLT KUEYEN on April 4, 1999. It is reproduced from an excellent 60-second R(ed)-band exposure of the innermost region of a globular cluster, Messier 68 (NGC 4590) , in the southern constellation Hydra (The Water-Snake). The distance to this 8-mag cluster is about 35,000 light years, and the diameter is about 140 light-years. The excellent image quality is 0.38 arcsec , demonstrating a good optical and mechanical state of the telescope, already at this early stage of the commissioning phase. The field measures about 90 x 90 arcsec 2. The original scale is 0.0455 pix/arcsec and there are 2048x2048 pixels in one frame. North is up and East is left. Caption to PR Photo 19b/99 : This photo shows the central region of spiral galaxy ESO 269-57 , located in the southern constellation Centaurus at a distance of about 150 million light-years. Many galaxies are seen in this direction at about the same distance, forming a loose cluster; there are also some fainter, more distant ones in the background. The designation refers to the ESO/Uppsala Survey of the Southern Sky in the 1970's during which over 15,000 southern galaxies were catalogued. ESO 269-57 is a tightly bound object of type Sar , the "r" referring to the "ring" that surrounds the bright centre, that is overexposed here. The photo is a composite, based on three exposures (Blue - 600 sec; Yellow-Green - 300 sec; Red - 300 sec) obtained with KUEYEN on March 28, 1999. The image quality is 0.7 arcsec and the field is 90 x 90 arcsec 2. North is up and East is left. ESO PR Photo 19c/99 ESO PR Photo 19c/99 [Preview - JPEG: 400 x 478 pix - 132k] [Normal - JPEG: 800 x 956 pix - 446k] [High-Res - JPEG: 3000 x 3583 pix - 4.6M] ESO PR Photo 19d/99 ESO PR Photo 19d/99 [Preview - JPEG: 400 x 454 pix - 86k] [Normal - JPEG: 800 x 907 pix - 301k] [High-Res - JPEG: 978 x 1109 pix - 282k] Caption to PR Photo 19c/99 : Somewhat further out in space, and right on the border between the southern constellations Hydra and Centaurus lies this knotty spiral galaxy, IC 4248 ; the distance is about 210 million light-years. It was imaged with KUEYEN on March 28, 1999, with the same filters and exposure times as used for Photo 19b/99. The image quality is 0.75 arcsec and the field is 90 x 90 arcsec 2. North is up and East is left. Caption to PR Photo 19d/99 : This is a close-up view of the double galaxy NGC 5090 (right) and NGC 5091 (left), in the southern constellation Centaurus. The first is a typical S0 galaxy with a bright diffuse centre, surrounded by a fainter envelope of stars (not resolved in this picture). However, some of the starlike objects seen in this region may be globular clusters (or dwarf galaxies) in orbit around NGC 5090. The other galaxy is of type Sa (the spiral structure is more developed) and is seen at a steep angle. The three-colour composite is based on frames obtained with KUEYEN on March 29, 1999, with the same filters and exposure times as used for Photo 19b/99. The image quality is 0.7 arcsec and the field is 90 x 90 arcsec 2. North is up and East is left. ( Note inserted on April 26: The original caption text identified the second galaxy as NGC 5090B - this error has now been corrected. ESO PR Photo 19e/99 ESO PR Photo 19e/99 [Preview - JPEG: 400 x 441 pix - 282k] [Normal - JPEG: 800 x 882 pix - 966k] [High-Res - JPEG: 3000 x 3307 pix - 6,4M] Caption to PR Photo 19e/99 : Wide-angle photo of the second 8.2-m VLT Unit Telescope, KUEYEN , obtained on March 10, 1999, with the main mirror and its cell in place at the bottom of the telescope structure. The Test Camera with which the astronomical images above were made, is positioned at the Cassegrain focus, inside this mirror cell. The Paranal Inauguration on March 5, 1999, took place under this telescope that was tilted towards the horizon to accommodate nearly 300 persons on the observing floor. Astronomical observations with ANTU have started On April 1, 1999, the first 8.2-m VLT Unit Telescope, ANTU , was "handed over" to the astronomers. Last year, about 270 observing proposals competed about the first, precious observing time at Europe's largest optical telescope and more than 100 of these were accommodated within the six-month period until the end of September 1999. The complete observing schedule is available on the web. These observations will be carried out in two different modes. During the Visitor Mode , the astronomers will be present at the telescope, while in the Service Mode , ESO observers perform the observations. The latter procedure allows a greater degree of flexibility and the possibility to assign periods of particularly good observing conditions to programmes whose success is critically dependent on this. The first ten nights at ANTU were allocated to service mode observations. After some initial technical problems with the instruments, these have now started. Already in the first night, programmes at ISAAC requiring 0.4 arcsec conditions could be satisfied, and some images better than 0.3 arcsec were obtained in the near-infrared . The first astronomers to use the telescope in visitors mode will be Professors Immo Appenzeller (Heidelberg, Germany; "Photo-polarimetry of pulsars") and George Miley (Leiden, The Netherlands; "Distant radio galaxies") with their respective team colleagues. How to obtain ESO Press Information ESO Press Information is made available on the World-Wide Web (URL: http://www.eso.org../ ). ESO Press Photos may be reproduced, if credit is given to the European Southern Observatory. Note also the dedicated webarea with VLT Information.

Black Hole in Search of a Home

NASA Astrophysics Data System (ADS)

2005-09-01

Astronomers Discover Bright Quasar Without Massive Host Galaxy An international team of astronomers [1] used two of the most powerful astronomical facilities available, the ESO Very Large Telescope (VLT) at Cerro Paranal and the Hubble Space Telescope (HST), to conduct a detailed study of 20 low redshift quasars. For 19 of them, they found, as expected, that these super massive black holes are surrounded by a host galaxy. But when they studied the bright quasar HE0450-2958, located some 5 billion light-years away, they couldn't find evidence for an encircling galaxy. This, the astronomers suggest, may indicate a rare case of collision between a seemingly normal spiral galaxy and a much more exotic object harbouring a very massive black hole. With masses up to hundreds of millions that of the Sun, "super massive" black holes are the most tantalizing objects known. Hiding in the centre of most large galaxies, including our own Milky Way (see ESO PR 26/03), they sometimes manifest themselves by devouring matter they engulf from their surroundings. Shining up to the largest distances, they are then called "quasars" or "QSOs" (for "quasi-stellar objects"), as they had initially been confused with stars. Decades of observations of quasars have suggested that they are always associated with massive host galaxies. However, observing the host galaxy of a quasar is a challenging work, because the quasar is radiating so energetically that its host galaxy is hard to detect in the flare. ESO PR Photo 28a/05 ESO PR Photo 28a/05 Two Quasars with their Host Galaxy [Preview - JPEG: 400 x 760 pix - 82k] [Normal - JPEG: 800 x 1520 pix - 395k] [Full Res - JPEG: 1722 x 3271 pix - 4.0M] Caption: ESO PR Photo 28a/05 shows two examples of quasars from the sample studied by the astronomers, where the host galaxy is obvious. In each case, the quasar is the bright central spot. The host of HE1239-2426 (left), a z=0.082 quasar, displays large spiral arms, while the host of HE1503+0228 (right), having a redshift of 0.135, is more fuzzy and shows only hints of spiral arms. Although these particular objects are rather close to us and constitute therefore easy targets, their host would still be perfectly visible at much higher redshift, including at distances as large as the one of HE0450-2958 (z=0.285). The observations were done with the ACS camera on the HST. ESO PR Photo 28b/05 ESO PR Photo 28b/05 The Quasar without a Home: HE0450-2958 [Preview - JPEG: 400 x 760 pix - 53k] [Normal - JPEG: 800 x 1520 pix - 197k] [Full Res - JPEG: 1718 x 3265 pix - 1.5M] Caption of ESO PR Photo 28b/05: (Left) HST image of the z=0.285 quasar HE0450-2958. No obvious host galaxy centred on the quasar is seen. Only a strongly disturbed and star forming companion galaxy is seen near the top of the image. (Right) Same image shown after applying an efficient image sharpening method known as MCS-deconvolution. In contrast to the usual cases, as the ones shown in ESO PR Photo 28a/05, the quasar is not situated at the centre of an extended host galaxy, but on the edge of a compact structure, whose spectra (see ESO PR Photo 28c/05) show it to be composed of gas ionised by the quasar radiation. This gas may have been captured through a collision with the star-forming galaxy. The star indicated on the figure is a nearby galactic star seen by chance in the field of view. To overcome this problem, the astronomers devised a new and highly efficient strategy. Using ESO's VLT for spectroscopy and HST for imagery, they observed their quasars at the same time as a reference star. Simultaneous observation of a star allowed them to measure at best the shape of the quasar point source on spectra and images, and further to separate the quasar light from the other contribution, i.e. from the underlying galaxy itself. This very powerful image and spectra sharpening method ("MCS deconvolution") was applied to these data in order to detect the finest details of the host galaxy (see e.g. ESO PR 19/03). Using this efficient technique, the astronomers could detect a host galaxy for all but one of the quasars they studied. No stellar environment was found for HE0450-2958, suggesting that if any host galaxy exists, it must either have a luminosity at least six times fainter than expected a priori from the quasar observed luminosity, or a radius smaller than about 300 light-years. Typical radii for quasar host galaxies range between 6,000 and 50,000 light-years, i.e. they are at least 20 to 170 times larger. "With the data we managed to secure with the VLT and the HST, we would have been able to detect a normal host galaxy", says Pierre Magain (Université de Liège, Belgium), lead author of the paper reporting the study. "We must therefore conclude that, contrary to our expectations, this bright quasar is not surrounded by a massive galaxy." Instead, the astronomers detected just besides the quasar a bright cloud of about 2,500 light-years in size, which they baptized "the blob". The VLT observations show this cloud to be composed only of gas ionised by the intense radiation coming from the quasar. It is probably the gas of this cloud which is feeding the supermassive black hole, allowing it to become a quasar. ESO PR Photo 28c/05 ESO PR Photo 28c/05 Spectrum of Quasar HE0450-2958, the Blob and the Companion Galaxy (FORS/VLT) [Preview - JPEG: 400 x 561 pix - 112k] [Normal - JPEG: 800 x 1121 pix - 257k] [HiRes - JPEG: 2332 x 3268 pix - 1.1M] Caption: ESO PR Photo 28c/05 presents the spectra of the three objects indicated in ESO PR Photo 28b/05 as obtained with FORS1 on ESO's Very Large Telescope. The spectrum of the companion galaxy shown on the top panel reveals strong star formation. Thanks to the image sharpening process, it has been possible to separate very well the spectra of the quasar (centre) from that of the blob (bottom). The spectrum of the blob shows exclusively strong narrow emission lines having properties indicative of ionisation by the quasar light. There is no trace of stellar light, down to very faint levels, in the surrounding of the quasar. A strongly perturbed galaxy, showing all signs of a recent collision, is also seen on the HST images 2 arcseconds away (corresponding to about 50,000 light-years), with the VLT spectra showing it to be presently in a state where it forms stars at a frantic rate. "The absence of a massive host galaxy, combined with the existence of the blob and the star-forming galaxy, lead us to believe that we have uncovered a really exotic quasar, says team member Frédéric Courbin (Ecole Polytechnique Fédérale de Lausanne, Switzerland). "There is little doubt that a burst in the formation of stars in the companion galaxy and the quasar itself have been ignited by a collision that must haven taken place about 100 million years ago. What happened to the putative quasar host remains unknown." HE0450-2958 constitutes a challenging case of interpretation. The astronomers propose several possible explanations, that will need to be further investigated and confronted. Has the host galaxy been completely disrupted as a result of the collision? It is hard to imagine how that could happen. Has an isolated black hole captured gas while crossing the disc of a spiral galaxy? This would require very special conditions and would probably not have caused such a tremendous perturbation as is observed in the neighbouring galaxy. Another intriguing hypothesis is that the galaxy harbouring the black hole was almost exclusively made of dark matter. "Whatever the solution of this riddle, the strong observable fact is that the quasar host galaxy, if any, is much too faint", says team member Knud Jahnke (Astrophysikalisches Institut Potsdam, Germany). The report on HE0450-2958 is published in the September 15, 2005 issue of the journal Nature ("Discovery of a bright quasar without a massive host galaxy" by Pierre Magain et al.).

Effects of Image Compression on Automatic Count of Immunohistochemically Stained Nuclei in Digital Images

PubMed Central

López, Carlos; Lejeune, Marylène; Escrivà, Patricia; Bosch, Ramón; Salvadó, Maria Teresa; Pons, Lluis E.; Baucells, Jordi; Cugat, Xavier; Álvaro, Tomás; Jaén, Joaquín

2008-01-01

This study investigates the effects of digital image compression on automatic quantification of immunohistochemical nuclear markers. We examined 188 images with a previously validated computer-assisted analysis system. A first group was composed of 47 images captured in TIFF format, and other three contained the same images converted from TIFF to JPEG format with 3×, 23× and 46× compression. Counts of TIFF format images were compared with the other three groups. Overall, differences in the count of the images increased with the percentage of compression. Low-complexity images (≤100 cells/field, without clusters or with small-area clusters) had small differences (<5 cells/field in 95–100% of cases) and high-complexity images showed substantial differences (<35–50 cells/field in 95–100% of cases). Compression does not compromise the accuracy of immunohistochemical nuclear marker counts obtained by computer-assisted analysis systems for digital images with low complexity and could be an efficient method for storing these images. PMID:18755997

ESO and NSF Sign Agreement on ALMA

NASA Astrophysics Data System (ADS)

2003-02-01

Green Light for World's Most Powerful Radio Observatory On February 25, 2003, the European Southern Observatory (ESO) and the US National Science Foundation (NSF) are signing a historic agreement to construct and operate the world's largest and most powerful radio telescope, operating at millimeter and sub-millimeter wavelength. The Director General of ESO, Dr. Catherine Cesarsky, and the Director of the NSF, Dr. Rita Colwell, act for their respective organizations. Known as the Atacama Large Millimeter Array (ALMA), the future facility will encompass sixty-four interconnected 12-meter antennae at a unique, high-altitude site at Chajnantor in the Atacama region of northern Chile. ALMA is a joint project between Europe and North America. In Europe, ESO is leading on behalf of its ten member countries and Spain. In North America, the NSF also acts for the National Research Council of Canada and executes the project through the National Radio Astronomy Observatory (NRAO) operated by Associated Universities, Inc. (AUI). The conclusion of the ESO-NSF Agreement now gives the final green light for the ALMA project. The total cost of approximately 650 million Euro (or US Dollars) is shared equally between the two partners. Dr. Cesarsky is excited: "This agreement signifies the start of a great project of contemporary astronomy and astrophysics. Representing Europe, and in collaboration with many laboratories and institutes on this continent, we together look forward towards wonderful research projects. With ALMA we may learn how the earliest galaxies in the Universe really looked like, to mention but one of the many eagerly awaited opportunities with this marvellous facility". "With this agreement, we usher in a new age of research in astronomy" says Dr. Colwell. "By working together in this truly global partnership, the international astronomy community will be able to ensure the research capabilities needed to meet the long-term demands of our scientific enterprise, and that we will be able to study and understand our universe in ways that have previously been beyond our vision". The recent Presidential decree from Chile for AUI and the agreement signed in late 2002 between ESO and the Government of the Republic of Chile (cf. ESO PR 18/02) recognize the interest that the ALMA Project has for Chile, as it will deepen and strengthen the cooperation in scientific and technological matters between the parties. A joint ALMA Board has been established which oversees the realisation of the ALMA project via the management structure. This Board meets for the first time on February 24-25, 2003, at NSF in Washington and will witness this historic event. ALMA: Imaging the Light from Cosmic Dawn ESO PR Photo 06a/03 ESO PR Photo 06a/03 [Preview - JPEG: 588 x 400 pix - 52k [Normal - JPEG: 1176 x 800 pix - 192k] [Hi-Res - JPEG: 3300 x 2244 pix - 2.0M] ESO PR Photo 06b/03 ESO PR Photo 06b/03 [Preview - JPEG: 502 x 400 pix - 82k [Normal - JPEG: 1003 x 800 pix - 392k] [Hi-Res - JPEG: 2222 x 1773 pix - 3.0M] ESO PR Photo 06c/03 ESO PR Photo 06c/03 [Preview - JPEG: 474 x 400 pix - 84k [Normal - JPEG: 947 x 800 pix - 344k] [Hi-Res - JPEG: 2272 x 1920 pix - 2.0M] ESO PR Photo 06d/03 ESO PR Photo 06d/03 [Preview - JPEG: 414 x 400 pix - 69k [Normal - JPEG: 828 x 800 pix - 336k] [HiRes - JPEG: 2935 x 2835 pix - 7.4k] Captions: PR Photo 06a/03 shows an artist's view of the Atacama Large Millimeter Array (ALMA), with 64 12-m antennae. PR Photo 06b/03 is another such view, with the array arranged in a compact configuration at the high-altitude Chajnantor site. The ALMA VertexRSI prototype antennae is shown in PR Photo 06c/03 on the Antenna Test Facility (ATF) site at the NRAO Very Large Array (VLA) site near Socorro (New Mexico, USA). The future ALMA site at Llano de Chajnantor at 5000 metre altitude, some 40 km East of the village of San Pedro de Atacama (Chile) is seen in PR Photo 06d/03 - this view was obtained at 11 hrs in the morning on a crisp and clear autumn day (more views of this site are available at the Chajnantor Photo Gallery). The Atacama Large Millimeter Array (ALMA) will be one of astronomy's most powerful telescopes - providing unprecedented imaging capabilities and sensitivity in the corresponding wavelength range, many orders of magnitude greater than anything of its kind today. ALMA will be an array of 64 antennae that will work together as one telescope to study millimeter and sub-millimeter wavelength radiation from space. This radiation crosses the critical boundary between infrared and microwave radiation and holds the key to understanding such processes as planet and star formation, the formation of early galaxies and galaxy clusters, and the formation of organic and other molecules in space. "ALMA will be one of astronomy's premier tools for studying the universe" says Nobel Laureate Riccardo Giacconi, President of AUI (and former ESO Director General (1993-1999)). "The entire astronomical community is anxious to have the unprecedented power and resolution that ALMA will provide". The President of the ESO Council, Professor Piet van der Kruit, agrees: "ALMA heralds a break-through in sub-millimeter and millimeter astronomy, allowing some of the most penetrating studies the Universe ever made. It is safe to predict that there will be exciting scientific surprises when ALMA enters into operation". What is millimeter and sub-millimeter wavelength astronomy? Astronomers learn about objects in space by studying the energy emitted by those objects. Our Sun and the other stars throughout the Universe emit visible light. But these objects also emit other kinds of light waves, such as X-rays, infrared radiation, and radio waves. Some objects emit very little or no visible light, yet are strong sources at other wavelengths in the electromagnetic spectrum. Much of the energy in the Universe is present in the sub-millimeter and millimeter portion of the spectrum. This energy comes from the cold dust mixed with gas in interstellar space. It also comes from distant galaxies that formed many billions of years ago at the edges of the known universe. With ALMA, astronomers will have a uniquely powerful facility with access to this remarkable portion of the spectrum and hence, new and wonderful opportunities to learn more about those objects. Current observatories simply do not have anywhere near the necessary sensitivity and resolution to unlock the secrets that abundant sub-millimeter and millimeter wavelength radiation can reveal. It will take the unparalleled power of ALMA to fully study the cosmic emission at this wavelength and better understand the nature of the universe. Scientists from all over the world will use ALMA. They will compete for observing time by submitting proposals, which will be judged by a group of their peers on the basis of scientific merit. ALMA's unique capabilities ALMA's ability to detect remarkably faint sub-millimeter and millimeter wavelength emission and to create high-resolution images of the source of that emission gives it capabilities not found in any other astronomical instruments. ALMA will therefore be able to study phenomena previously out of reach to astronomers and astrophysicists, such as: * Very young galaxies forming stars at the earliest times in cosmic history; * New planets forming around young stars in our galaxy, the Milky Way; * The birth of new stars in spinning clouds of gas and dust; and * Interstellar clouds of gas and dust that are the nurseries of complex molecules and even organic chemicals that form the building blocks of life. How will ALMA work? All of ALMA's 64 antennae will work in concert, taking quick "snapshots" or long-term exposures of astronomical objects. Cosmic radiation from these objects will be reflected from the surface of each antenna and focussed onto highly sensitive receivers cooled to just a few degrees above absolute zero in order to suppress undesired "noise" from the surroundings. There the signals will be amplified many times, digitized, and then sent along underground fiber-optic cables to a large signal processor in the central control building. This specialized computer, called a correlator - running at 16,000 million-million operations per second - will combine all of the data from the 64 antennae to make images of remarkable quality. The extraordinary ALMA site Since atmospheric water vapor absorbs millimeter and (especially) sub-millimeter waves, ALMA must be constructed at a very high altitude in a very dry region of the earth. Extensive tests showed that the sky above the Atacama Desert of Chile has the excellent clarity and stability essential for ALMA. That is why ALMA will be built there, on Llano de Chajnantor at an altitude of 5,000 metres in the Chilean Andes. A series of views of this site, also in high-resolution suitable for reproduction, is available at the Chajnantor Photo Gallery. Timeline for ALMA June 1998: Phase 1 (Research and Development) June 1999: European/American Memorandum of Understanding February 2003: Signature of the bilateral Agreement 2004: Tests of the Prototype System 2007: Initial scientific operation of a partially completed array 2011: End of construction of the array

Unequal power allocation for JPEG transmission over MIMO systems.

PubMed

Sabir, Muhammad Farooq; Bovik, Alan Conrad; Heath, Robert W

2010-02-01

With the introduction of multiple transmit and receive antennas in next generation wireless systems, real-time image and video communication are expected to become quite common, since very high data rates will become available along with improved data reliability. New joint transmission and coding schemes that explore advantages of multiple antenna systems matched with source statistics are expected to be developed. Based on this idea, we present an unequal power allocation scheme for transmission of JPEG compressed images over multiple-input multiple-output systems employing spatial multiplexing. The JPEG-compressed image is divided into different quality layers, and different layers are transmitted simultaneously from different transmit antennas using unequal transmit power, with a constraint on the total transmit power during any symbol period. Results show that our unequal power allocation scheme provides significant image quality improvement as compared to different equal power allocations schemes, with the peak-signal-to-noise-ratio gain as high as 14 dB at low signal-to-noise-ratios.

A new concept of real-time security camera monitoring with privacy protection by masking moving objects

NASA Astrophysics Data System (ADS)

Yabuta, Kenichi; Kitazawa, Hitoshi; Tanaka, Toshihisa

2006-02-01

Recently, monitoring cameras for security have been extensively increasing. However, it is normally difficult to know when and where we are monitored by these cameras and how the recorded images are stored and/or used. Therefore, how to protect privacy in the recorded images is a crucial issue. In this paper, we address this problem and introduce a framework for security monitoring systems considering the privacy protection. We state requirements for monitoring systems in this framework. We propose a possible implementation that satisfies the requirements. To protect privacy of recorded objects, they are made invisible by appropriate image processing techniques. Moreover, the original objects are encrypted and watermarked into the image with the "invisible" objects, which is coded by the JPEG standard. Therefore, the image decoded by a normal JPEG viewer includes the objects that are unrecognized or invisible. We also introduce in this paper a so-called "special viewer" in order to decrypt and display the original objects. This special viewer can be used by limited users when necessary for crime investigation, etc. The special viewer allows us to choose objects to be decoded and displayed. Moreover, in this proposed system, real-time processing can be performed, since no future frame is needed to generate a bitstream.

Image transmission system using adaptive joint source and channel decoding

NASA Astrophysics Data System (ADS)

Liu, Weiliang; Daut, David G.

2005-03-01

In this paper, an adaptive joint source and channel decoding method is designed to accelerate the convergence of the iterative log-dimain sum-product decoding procedure of LDPC codes as well as to improve the reconstructed image quality. Error resilience modes are used in the JPEG2000 source codec, which makes it possible to provide useful source decoded information to the channel decoder. After each iteration, a tentative decoding is made and the channel decoded bits are then sent to the JPEG2000 decoder. Due to the error resilience modes, some bits are known to be either correct or in error. The positions of these bits are then fed back to the channel decoder. The log-likelihood ratios (LLR) of these bits are then modified by a weighting factor for the next iteration. By observing the statistics of the decoding procedure, the weighting factor is designed as a function of the channel condition. That is, for lower channel SNR, a larger factor is assigned, and vice versa. Results show that the proposed joint decoding methods can greatly reduce the number of iterations, and thereby reduce the decoding delay considerably. At the same time, this method always outperforms the non-source controlled decoding method up to 5dB in terms of PSNR for various reconstructed images.

Proposed color workflow solution from mobile and website to printing

NASA Astrophysics Data System (ADS)

Qiao, Mu; Wyse, Terry

2015-03-01

With the recent introduction of mobile devices and development in client side application technologies, there is an explosion of the parameter matrix for color management: hardware platform (computer vs. mobile), operating system (Windows, Mac OS, Android, iOS), client application (Flesh, IE, Firefox, Safari, Chrome), and file format (JPEG, TIFF, PDF of various versions). In a modern digital print shop, multiple print solutions are used: digital presses, wide format inkjet, dye sublimation inkjet are used to produce a wide variety of customizable products from photo book, personalized greeting card, canvas, mobile phone case and more. In this paper, we outline a strategy spans from client side application, print file construction, to color setup on printer to manage consistency and also achieve what-you-see-is-what-you-get for customers who are using a wide variety of technologies in viewing and ordering product.

Hunting the Southern Skies with SIMBA

NASA Astrophysics Data System (ADS)

2001-08-01

First Images from the New "Millimetre Camera" on SEST at La Silla Summary A new instrument, SIMBA ("SEST IMaging Bolometer Array") , has been installed at the Swedish-ESO Submillimetre Telescope (SEST) at the ESO La Silla Observatory in July 2001. It records astronomical images at a wavelength of 1.2 mm and is able to quickly map large sky areas. In order to achieve the best possible sensitivity, SIMBA is cooled to only 0.3 deg above the absolute zero on the temperature scale. SIMBA is the first imaging millimetre instrument in the southern hemisphere . Radiation at this wavelength is mostly emitted from cold dust and ionized gas in a variety of objects in the Universe. Among other, SIMBA now opens exciting prospects for in-depth studies of the "hidden" sites of star formation , deep inside dense interstellar nebulae. While such clouds are impenetrable to optical light, they are transparent to millimetre radiation and SIMBA can therefore observe the associated phenomena, in particular the dust around nascent stars . This sophisticated instrument can also search for disks of cold dust around nearby stars in which planets are being formed or which may be left-overs of this basic process. Equally important, SIMBA may observe extremely distant galaxies in the early universe , recording them while they were still in the formation stage. Various SIMBA images have been obtained during the first tests of the new instrument. The first observations confirm the great promise for unique astronomical studies of the southern sky in the millimetre wavelength region. These results also pave the way towards the Atacama Large Millimeter Array (ALMA) , the giant, joint research project that is now under study in Europe, the USA and Japan. PR Photo 28a/01 : SIMBA image centered on the infrared source IRAS 17175-3544 PR Photo 28b/01 : SIMBA image centered on the infrared source IRAS 18434-0242 PR Photo 28c/01 : SIMBA image centered on the infrared source IRAS 17271-3439 PR Photo 28d/01 : View of the SIMBA instrument First observations with SIMBA SIMBA ("SEST IMaging Bolometer Array") was built and installed at the Swedish-ESO Submillimetre Telescope (SEST) at La Silla (Chile) within an international collaboration between the University of Bochum and the Max Planck Institute for Radio Astronomy in Germany, the Swedish National Facility for Radio Astronomy and ESO . The SIMBA ("Lion" in Swahili) instrument detects radiation at a wavelength of 1.2 mm . It has 37 "horns" and acts like a camera with 37 picture elements (pixels). By changing the pointing direction of the telescope, relatively large sky fields can be imaged. As the first and only imaging millimetre instrument in the southern hemisphere , SIMBA now looks up towards rich and virgin hunting grounds in the sky. Observations at millimetre wavelengths are particularly useful for studies of star formation , deep inside dense interstellar clouds that are impenetrable to optical light. Other objects for which SIMBA is especially suited include planet-forming disks of cold dust around nearby stars and extremely distant galaxies in the early universe , still in the stage of formation. During the first observations, SIMBA was used to study the gas and dust content of star-forming regions in our own Milky Way Galaxy, as well as in the Magellanic Clouds and more distant galaxies. It was also used to record emission from planetary nebulae , clouds of matter ejected by dying stars. Moreover, attempts were made to detect distant galaxies and quasars radiating at mm-wavelengths and located in two well-studied sky fields, the "Hubble Deep Field South" and the "Chandra Deep Field" [1]. Observations with SEST and SIMBA also serve to identify objects that can be observed at higher resolution and at shorter wavelengths with future southern submm telescopes and interferometers such as APEX (see MPG Press Release 07/01 of 6 July 2001) and ALMA. SIMBA images regions of high-mass star formation ESO PR Photo 28a/01 ESO PR Photo 28a/01 [Preview - JPEG: 400 x 568 pix - 61k] [Normal - JPEG: 800 x 1136 pix - 200k] Caption : This intensity-coded, false-colour SIMBA image is centered on the infrared source IRAS 17175-3544 and covers the well-known high-mass star formation complex NGC 6334 , at a distance of 5500 light-years. The southern bright source is an ultra-compact region of ionized hydrogen ("HII region") created by a star or several stars already formed. The northern bright source has not yet developed an HII region and may be a star or a cluster of stars that are presently forming. A remarkable, narrow, linear dust filament extends over the image; it was known to exist before, but the SIMBA image now shows it to a much larger extent and much more clearly. This and the following images cover an area of about 15 arcmin x 6 arcmin on the sky and have a pixel size of 8 arcsec. ESO PR Photo 28b/01 ESO PR Photo 28b/01 [Preview - JPEG: 532 x 400 pix - 52k] [Normal - JPEG: 1064 x 800 pix - 168k] Caption : This SIMBA image is centered on the object IRAS 18434-0242 . It includes many bright sources that are associated with dense cores and compact HII regions located deep inside the cloud. A much less detailed map was made several years ago with a single channel bolometer on SEST. The new SIMBA map is more extended and shows more sources. ESO PR Photo 28c/01 ESO PR Photo 28c/01 [Preview - JPEG: 400 x 505 pix - 59k] [Normal - JPEG: 800 x 1009 pix - 160k] Caption : Another SIMBA image is centered on IRAS 17271-3439 and includes an extended bright source that is associated with several compact HII regions as well as a cluster of weaker sources. Some of the recent SIMBA images are shown above; they were taken during test observations, and within a pilot survey of high-mass starforming regions . Stars form in interstellar clouds that consist of gas and dust. The denser parts of these clouds can collapse into cold and dense cores which may form stars. Often many stars are formed in clusters, at about the same time. The newborn stars heat up the surrounding regions of the cloud . Radiation is emitted, first at mm-wavelengths and later at infrared wavelengths as the cloud core gets hotter. If very massive stars are formed, their UV-radiation ionizes the immediate surrounding gas and this ionized gas also emits at mm-wavelengths. These ionized regions are called ultra compact HII regions . Because the stars form deep inside the interstellar clouds, the obscuration at visible wavelengths is very high and it is not possible to see these regions optically. The objects selected for the SIMBA survey are from a catalog of objects, first detected at long infrared wavelengths with the IRAS satellite (launched in 1983), hence the designations indicated in Photos 28a-c/01 . From 1995 to 1998, the ESA Infrared Space Observatory (ISO) gathered an enormous amount of valuable data, obtaining images and spectra in the broad infrared wavelength region from 2.5 to 240 µm (0.025 to 0.240 mm), i.e. just shortward of the millimetre region in which SIMBA operates. ISO produced mid-infrared images of field size and angular resolution (sharpness) comparable to those of SIMBA. It will obviously be most interesting to combine the images that will be made with SIMBA with imaging and spectral data from ISO and also with those obtained by large ground-based telescopes in the near- and mid-infrared spectral regions. Some technical details about the SIMBA instrument ESO PR Photo 28d/01 ESO PR Photo 28d/01 [Preview - JPEG: 509 x 400 pix - 83k] [Normal - JPEG: 1017 x 800 pix - 528k] Caption : The SIMBA instrument - with the cover removed - in the SEST electronics laboratory. The 37 antenna horns to the right, each of which produces one picture element (pixel) of the combined image. The bolometer elements are located behind the horns. The cylindrical aluminium foil covered unit is the cooler that keeps SIMBA at extremely low temperature (-272.85 °C, or only 0.3 deg above the absolute zero) when it is mounted in the telescope. SIMBA is unique because of its ability to quickly map large sky areas due to the fast scanning mode. In order to achieve low noise and good sensitivity, the instrument is cooled to only 0.3 deg above the absolute zero, i.e., to -272.85 °C. SIMBA consists of 37 horns (each providing one pixel on the sky) arranged in a hexagonal pattern, cf. Photo 28d/01 . To form images, the sky position of the telescope is changed according to a raster pattern - in this way all of a celestial object and the surrounding sky field may be "scanned" fast, at speeds of typically 80 arcsec per second. This makes SIMBA a very efficient facility: for instance, a fully sampled image of good sensitivity with a field size of 15 arcmin x 6 arcmin can be taken in 15 minutes. If higher sensitivity is needed (to observe fainter sources), more images may be obtained of the same field and then added together. Large sky areas can be covered by combining many images taken at different positions. The image resolution (the "telescope beamsize") is 22 arcsec, corresponding to the angular resolution of this 15-m telescope at the indicated wavelength. Note [1} Observations of the HDFS and CDFS fields in other wavebands with other telescopes at the ESO observatories have been reported earlier, e.g. within the ESO Imaging Survey Project (EIS) (the "EIS Deep-Survey"). It is the ESO policy on these fields to make data public world-wide.

Young Stars in Old Galaxies - a Cosmic Hide and Seek Game

NASA Astrophysics Data System (ADS)

2002-05-01

Surprise Discovery with World's Leading Telescopes [1] Summary Combining data from the NASA/ESA Hubble Space Telescope (HST) and the ESO Very Large Telescope (VLT) , a group of European and American astronomers [2] have made an unexpected, major discovery. They have identified a huge number of "young" stellar clusters , only a few billion years old [3], inside an "old" elliptical galaxy (NGC 4365), probably aged some 12 billion years. For the first time, it has been possible to identify several distinct periods of star-formation in a galaxy as old as this one . Elliptical galaxies like NGC 4365 have until now been considered to have undergone one early star-forming period and thereafter to be devoid of any star formation. However, the combination of the best and largest telescopes in space and on the ground has now clearly shown that there is more than meets the eye. This important new information will help to understand the early history of galaxies and the general theory of star formation in the Universe . PR Photo 15a/02 : Combined HST+VLT image of elliptical galaxy NGC 4365 PR Photo 15b/02 : Same image, with "old" and "young" stellar clusters indicated PR Photo 15c/02 : Animated GIF image, showing the three cluster populations observed in NGC 4365 Do elliptical galaxies only contain old stars? One of the challenges of modern astronomy is to understand how galaxies, those large systems of stars, gas and dust, form and evolve. In this connection, a central question has always been to learn when most of the stars in the Universe formed. Did this happen at a very early stage, within a few billion years after the Big Bang? Or were a significant number of the stars we now observe formed much more recently? Spectacular collisions between galaxies take place all the time, triggering the formation of thousands or even millions of stars, cf. ESO PR Photo 29b/99 of the dramatic encounter between NGC 6872 and IC 4970. However, when looking at the Universe as a whole, most of its stars are found in large elliptical galaxies (this refers to their form) whose overall appearance has so far led us to believe that they, and their stars as well, are very old, indeed among the oldest objects in the Universe. These elliptical galaxies do shine with the diffuse, reddish glow normally associated with stars that are many billions of years old. However, what is really the underlying mix of stars that produces this elderly appearance? Could perhaps a significant number of much younger stars be "hiding" among the older ones? Whatever the case, this question must obviously be looked into, before it is possible to claim understanding of the evolution of these old galaxies. It is a very challenging investigation and it is only now that new and more detailed observations with the world's premier telescopes have been obtained that cast more light on this central question and thus on the true behaviour of some of the major building blocks of the Universe. Cosmic archaeology In order to identify the constitutents of the stellar "cocktail" in elliptical galaxies, a team of European and American astronomers [2] observed massive stellar clusters in and around several nearby galaxies. These clusters, referred to as "globular" because of their shape, are present in large numbers around most galaxies and together they form a kind of "skeleton" within their host galaxies. These "bones" receive an imprint for every episode of star formation they undergo. Thus, by reading the ages of the globular clusters in a galaxy, it is possible to identify the past epoch(s) of active star formation in that galaxy. This is like digging into the ruins of an ancient archaeological city site and to find those layers and establish those times when the city underwent bursts of building activity. In this way, by the study of the distribution and ages of the globular clusters in an elliptical galaxy, astronomers can reveal when many of its stars were formed. A surprise discovery ESO PR Photo 15a/02 ESO PR Photo 15a/02 [Preview - JPEG: 400 x 484 pix - 120k [Normal - JPEG: 800 x 967 pix - 408k] [HiRes - JPEG: 1854 x 2241 pix - 1.5M] ESO PR Photo 15b/02 ESO PR Photo 15b/02 [Preview - JPEG: 400 x 484 pix - 160k] [Normal - JPEG: 800 x 967 pix - 480k] ESO PR Photo 15c/02 ESO PR Photo 15c/02 [Animated GIF: 400 x 414 pix - 264k] Caption : PR Photo 15a/02 shows a colour composite of the elliptical galaxy NGC 4365, prepared from two exposures with the HST and one from the VLT. Many of the objects seen are stellar clusters in this galaxy. There are also a large number of background galaxies in the field. In PR Photo 15b/02 , the distribution of "old" (red circles) and "young" (blue circles) stellar clusters in NGC 4365 are shown, as they were identified during the present investigation. PR Photo 15c/02 shows the distribution of three populations of stellar clusters mentioned in the text (a: old and metal-poor; b: old and metal-rich; c: young and metal-rich). Technical information about these photos is available below. The team combined images in visual light of a number of galaxies from Hubble's Wide Field and Planetary Camera 2 (WFPC2) with infrared images obtained with the multi-mode ISAAC instrument on the 8.2-m VLT ANTU telescope at the ESO Paranal Observatory (Chile). When measuring very accurately the colours of the globular clusters in one of these galaxies, NGC 4365 that is a member of the large Virgo Cluster of galaxies, they discovered to their great surprise that many of these clusters are only a few billion years old, i.e. much younger than the age of most other stars in that galaxy, roughly 12 billion years. In fact, the astronomers were able to identify three major groups of globular clusters in NGC 4365 . First, there is an old population of clusters of metal-poor stars, then there are some clusters of old, but metal-rich stars and now, seen for the first time, a third population of clusters with young and metal-rich stars . "We needed the combination of the Hubble and the VLT with the latest space- and ground-based astronomical technology to break this new ground", says group leader Markus Kissler-Patig from the European Southern Observatory Headquarters in Garching (Germany). "Once we had found those young clusters, we then went on to observe them spectroscopically with another of the world's giant telescopes, the 10-m Keck on Hawaii - and this fully confirmed our results." A new important clue to the evolution of the Universe This is a surprising discovery since the stars in giant elliptical galaxies were until now believed to have formed exclusively early on in the history of the Universe. However, it is now clear that some of the old galaxies may have been hiding their true nature and have indeed experienced much more recent periods of major star formation. This is priceless new information for the current attempts to understand the early history of galaxies and the general theory of star formation in the Universe. More information The information presented in this Press Release is based on a research article that has been accepted for publication in the European journal "Astronomy & Astrophysics" ("Extragalactic Globular Clusters in the Near-Infrared: II. The Globular Cluster Systems of NGC 3115 and NGC 4365" by Thomas H. Puzia, Stephen E. Zepf, Markus Kissler-Patig, Michael Hilker, Dante Minniti and Paul Goudfrooij; astro-ph/0206147 ). Notes [1]: This press release is issued in coordination between ESA and ESO. The Hubble Space Telescope is an international cooperation between ESA and NASA. The team is presenting these results at the New Horizons in Globular Cluster Astronomy conference in Padova, Italy 24-28 June, 2002. [2]: The team consists of Thomas H. Puzia (Sternwarte Müenchen, Germany), Stephen E. Zepf (Yale University and Michigan State University, USA), Markus Kissler-Patig and Maren Hempel (ESO, Garching, Germany), Michael Hilker (Sternwarte Bonn, Germany), Dante Minniti (Universidad Catolica, Santiago de Chile) and Paul Goudfrooij (Space Telescope Science Institute, Baltimore, USA). [3]: 1 billion = 1,000 million = 1,000,000,000

Digital image forensics for photographic copying

NASA Astrophysics Data System (ADS)

Yin, Jing; Fang, Yanmei

2012-03-01

Image display technology has greatly developed over the past few decades, which make it possible to recapture high-quality images from the display medium, such as a liquid crystal display(LCD) screen or a printed paper. The recaptured images are not regarded as a separate image class in the current research of digital image forensics, while the content of the recaptured images may have been tempered. In this paper, two sets of features based on the noise and the traces of double JPEG compression are proposed to identify these recaptured images. Experimental results showed that our proposed features perform well for detecting photographic copying.

Study and validation of tools interoperability in JPSEC

NASA Astrophysics Data System (ADS)

Conan, V.; Sadourny, Y.; Jean-Marie, K.; Chan, C.; Wee, S.; Apostolopoulos, J.

2005-08-01

Digital imagery is important in many applications today, and the security of digital imagery is important today and is likely to gain in importance in the near future. The emerging international standard ISO/IEC JPEG-2000 Security (JPSEC) is designed to provide security for digital imagery, and in particular digital imagery coded with the JPEG-2000 image coding standard. One of the primary goals of a standard is to ensure interoperability between creators and consumers produced by different manufacturers. The JPSEC standard, similar to the popular JPEG and MPEG family of standards, specifies only the bitstream syntax and the receiver's processing, and not how the bitstream is created or the details of how it is consumed. This paper examines the interoperability for the JPSEC standard, and presents an example JPSEC consumption process which can provide insights in the design of JPSEC consumers. Initial interoperability tests between different groups with independently created implementations of JPSEC creators and consumers have been successful in providing the JPSEC security services of confidentiality (via encryption) and authentication (via message authentication codes, or MACs). Further interoperability work is on-going.

Wavelet-based compression of M-FISH images.

PubMed

Hua, Jianping; Xiong, Zixiang; Wu, Qiang; Castleman, Kenneth R

2005-05-01

Multiplex fluorescence in situ hybridization (M-FISH) is a recently developed technology that enables multi-color chromosome karyotyping for molecular cytogenetic analysis. Each M-FISH image set consists of a number of aligned images of the same chromosome specimen captured at different optical wavelength. This paper presents embedded M-FISH image coding (EMIC), where the foreground objects/chromosomes and the background objects/images are coded separately. We first apply critically sampled integer wavelet transforms to both the foreground and the background. We then use object-based bit-plane coding to compress each object and generate separate embedded bitstreams that allow continuous lossy-to-lossless compression of the foreground and the background. For efficient arithmetic coding of bit planes, we propose a method of designing an optimal context model that specifically exploits the statistical characteristics of M-FISH images in the wavelet domain. Our experiments show that EMIC achieves nearly twice as much compression as Lempel-Ziv-Welch coding. EMIC also performs much better than JPEG-LS and JPEG-2000 for lossless coding. The lossy performance of EMIC is significantly better than that of coding each M-FISH image with JPEG-2000.

Diagnostic accuracy of chest X-rays acquired using a digital camera for low-cost teleradiology.

PubMed

Szot, Agnieszka; Jacobson, Francine L; Munn, Samson; Jazayeri, Darius; Nardell, Edward; Harrison, David; Drosten, Ralph; Ohno-Machado, Lucila; Smeaton, Laura M; Fraser, Hamish S F

2004-02-01

Store-and-forward telemedicine, using e-mail to send clinical data and digital images, offers a low-cost alternative for physicians in developing countries to obtain second opinions from specialists. To explore the potential usefulness of this technique, 91 chest X-ray images were photographed using a digital camera and a view box. Four independent readers (three radiologists and one pulmonologist) read two types of digital (JPEG and JPEG2000) and original film images and indicated their confidence in the presence of eight features known to be radiological indicators of tuberculosis (TB). The results were compared to a "gold standard" established by two different radiologists, and assessed using receiver operating characteristic (ROC) curve analysis. There was no statistical difference in the overall performance between the readings from the original films and both types of digital images. The size of JPEG2000 images was approximately 120KB, making this technique feasible for slow internet connections. Our preliminary results show the potential usefulness of this technique particularly for tuberculosis and lung disease, but further studies are required to refine its potential.

JPIC-Rad-Hard JPEG2000 Image Compression ASIC

NASA Astrophysics Data System (ADS)

Zervas, Nikos; Ginosar, Ran; Broyde, Amitai; Alon, Dov

2010-08-01

JPIC is a rad-hard high-performance image compression ASIC for the aerospace market. JPIC implements tier 1 of the ISO/IEC 15444-1 JPEG2000 (a.k.a. J2K) image compression standard [1] as well as the post compression rate-distortion algorithm, which is part of tier 2 coding. A modular architecture enables employing a single JPIC or multiple coordinated JPIC units. JPIC is designed to support wide data sources of imager in optical, panchromatic and multi-spectral space and airborne sensors. JPIC has been developed as a collaboration of Alma Technologies S.A. (Greece), MBT/IAI Ltd (Israel) and Ramon Chips Ltd (Israel). MBT IAI defined the system architecture requirements and interfaces, The JPEG2K-E IP core from Alma implements the compression algorithm [2]. Ramon Chips adds SERDES interfaces and host interfaces and integrates the ASIC. MBT has demonstrated the full chip on an FPGA board and created system boards employing multiple JPIC units. The ASIC implementation, based on Ramon Chips' 180nm CMOS RadSafe[TM] RH cell library enables superior radiation hardness.

JPEG2000 still image coding quality.

PubMed

Chen, Tzong-Jer; Lin, Sheng-Chieh; Lin, You-Chen; Cheng, Ren-Gui; Lin, Li-Hui; Wu, Wei

2013-10-01

This work demonstrates the image qualities between two popular JPEG2000 programs. Two medical image compression algorithms are both coded using JPEG2000, but they are different regarding the interface, convenience, speed of computation, and their characteristic options influenced by the encoder, quantization, tiling, etc. The differences in image quality and compression ratio are also affected by the modality and compression algorithm implementation. Do they provide the same quality? The qualities of compressed medical images from two image compression programs named Apollo and JJ2000 were evaluated extensively using objective metrics. These algorithms were applied to three medical image modalities at various compression ratios ranging from 10:1 to 100:1. Following that, the quality of the reconstructed images was evaluated using five objective metrics. The Spearman rank correlation coefficients were measured under every metric in the two programs. We found that JJ2000 and Apollo exhibited indistinguishable image quality for all images evaluated using the above five metrics (r > 0.98, p < 0.001). It can be concluded that the image quality of the JJ2000 and Apollo algorithms is statistically equivalent for medical image compression.

Review on the Celestial Sphere Positioning of FITS Format Image Based on WCS and Research on General Visualization

NASA Astrophysics Data System (ADS)

Song, W. M.; Fan, D. W.; Su, L. Y.; Cui, C. Z.

2017-11-01

Calculating the coordinate parameters recorded in the form of key/value pairs in FITS (Flexible Image Transport System) header is the key to determine FITS images' position in the celestial system. As a result, it has great significance in researching the general process of calculating the coordinate parameters. By combining CCD related parameters of astronomical telescope (such as field, focal length, and celestial coordinates in optical axis, etc.), astronomical images recognition algorithm, and WCS (World Coordinate System) theory, the parameters can be calculated effectively. CCD parameters determine the scope of star catalogue, so that they can be used to build a reference star catalogue by the corresponding celestial region of astronomical images; Star pattern recognition completes the matching between the astronomical image and reference star catalogue, and obtains a table with a certain number of stars between CCD plane coordinates and their celestial coordinates for comparison; According to different projection of the sphere to the plane, WCS can build different transfer functions between these two coordinates, and the astronomical position of image pixels can be determined by the table's data we have worked before. FITS images are used to carry out scientific data transmission and analyze as a kind of mainstream data format, but only to be viewed, edited, and analyzed in the professional astronomy software. It decides the limitation of popular science education in astronomy. The realization of a general image visualization method is significant. FITS is converted to PNG or JPEG images firstly. The coordinate parameters in the FITS header are converted to metadata in the form of AVM (Astronomy Visualization Metadata), and then the metadata is added to the PNG or JPEG header. This method can meet amateur astronomers' general needs of viewing and analyzing astronomical images in the non-astronomical software platform. The overall design flow is realized through the java program and tested by SExtractor, WorldWide Telescope, picture viewer, and other software.

DCTune Perceptual Optimization of Compressed Dental X-Rays

NASA Technical Reports Server (NTRS)

Watson, Andrew B.; Null, Cynthia H. (Technical Monitor)

1996-01-01

In current dental practice, x-rays of completed dental work are often sent to the insurer for verification. It is faster and cheaper to transmit instead digital scans of the x-rays. Further economies result if the images are sent in compressed form. DCTune is a technology for optimizing DCT (digital communication technology) quantization matrices to yield maximum perceptual quality for a given bit-rate, or minimum bit-rate for a given perceptual quality. Perceptual optimization of DCT color quantization matrices. In addition, the technology provides a means of setting the perceptual quality of compressed imagery in a systematic way. The purpose of this research was, with respect to dental x-rays, 1) to verify the advantage of DCTune over standard JPEG (Joint Photographic Experts Group), 2) to verify the quality control feature of DCTune, and 3) to discover regularities in the optimized matrices of a set of images. We optimized matrices for a total of 20 images at two resolutions (150 and 300 dpi) and four bit-rates (0.25, 0.5, 0.75, 1.0 bits/pixel), and examined structural regularities in the resulting matrices. We also conducted psychophysical studies (1) to discover the DCTune quality level at which the images became 'visually lossless,' and (2) to rate the relative quality of DCTune and standard JPEG images at various bitrates. Results include: (1) At both resolutions, DCTune quality is a linear function of bit-rate. (2) DCTune quantization matrices for all images at all bitrates and resolutions are modeled well by an inverse Gaussian, with parameters of amplitude and width. (3) As bit-rate is varied, optimal values of both amplitude and width covary in an approximately linear fashion. (4) Both amplitude and width vary in systematic and orderly fashion with either bit-rate or DCTune quality; simple mathematical functions serve to describe these relationships. (5) In going from 150 to 300 dpi, amplitude parameters are substantially lower and widths larger at corresponding bit-rates or qualities. (6) Visually lossless compression occurs at a DCTune quality value of about 1. (7) At 0.25 bits/pixel, comparative ratings give DCTune a substantial advantage over standard JPEG. As visually lossless bit-rates are approached, this advantage of necessity diminishes. We have concluded that DCTune optimized quantization matrices provide better visual quality than standard JPEG. Meaningful quality levels may be specified by means of the DCTune metric. Optimized matrices are very similar across the class of dental x-rays, suggesting the possibility of a 'class-optimal' matrix. DCTune technology appears to provide some value in the context of compressed dental x-rays.

Digital image modification detection using color information and its histograms.

PubMed

Zhou, Haoyu; Shen, Yue; Zhu, Xinghui; Liu, Bo; Fu, Zigang; Fan, Na

2016-09-01

The rapid development of many open source and commercial image editing software makes the authenticity of the digital images questionable. Copy-move forgery is one of the most widely used tampering techniques to create desirable objects or conceal undesirable objects in a scene. Existing techniques reported in the literature to detect such tampering aim to improve the robustness of these methods against the use of JPEG compression, blurring, noise, or other types of post processing operations. These post processing operations are frequently used with the intention to conceal tampering and reduce tampering clues. A robust method based on the color moments and other five image descriptors is proposed in this paper. The method divides the image into fixed size overlapping blocks. Clustering operation divides entire search space into smaller pieces with similar color distribution. Blocks from the tampered regions will reside within the same cluster since both copied and moved regions have similar color distributions. Five image descriptors are used to extract block features, which makes the method more robust to post processing operations. An ensemble of deep compositional pattern-producing neural networks are trained with these extracted features. Similarity among feature vectors in clusters indicates possible forged regions. Experimental results show that the proposed method can detect copy-move forgery even if an image was distorted by gamma correction, addictive white Gaussian noise, JPEG compression, or blurring. Copyright © 2016. Published by Elsevier Ireland Ltd.

Color image lossy compression based on blind evaluation and prediction of noise characteristics

NASA Astrophysics Data System (ADS)

Ponomarenko, Nikolay N.; Lukin, Vladimir V.; Egiazarian, Karen O.; Lepisto, Leena

2011-03-01

The paper deals with JPEG adaptive lossy compression of color images formed by digital cameras. Adaptation to noise characteristics and blur estimated for each given image is carried out. The dominant factor degrading image quality is determined in a blind manner. Characteristics of this dominant factor are then estimated. Finally, a scaling factor that determines quantization steps for default JPEG table is adaptively set (selected). Within this general framework, two possible strategies are considered. A first one presumes blind estimation for an image after all operations in digital image processing chain just before compressing a given raster image. A second strategy is based on prediction of noise and blur parameters from analysis of RAW image under quite general assumptions concerning characteristics parameters of transformations an image will be subject to at further processing stages. The advantages of both strategies are discussed. The first strategy provides more accurate estimation and larger benefit in image compression ratio (CR) compared to super-high quality (SHQ) mode. However, it is more complicated and requires more resources. The second strategy is simpler but less beneficial. The proposed approaches are tested for quite many real life color images acquired by digital cameras and shown to provide more than two time increase of average CR compared to SHQ mode without introducing visible distortions with respect to SHQ compressed images.

Deepest Wide-Field Colour Image in the Southern Sky

NASA Astrophysics Data System (ADS)

2003-01-01

LA SILLA CAMERA OBSERVES CHANDRA DEEP FIELD SOUTH ESO PR Photo 02a/03 ESO PR Photo 02a/03 [Preview - JPEG: 400 x 437 pix - 95k] [Normal - JPEG: 800 x 873 pix - 904k] [HiRes - JPEG: 4000 x 4366 pix - 23.1M] Caption : PR Photo 02a/03 shows a three-colour composite image of the Chandra Deep Field South (CDF-S) , obtained with the Wide Field Imager (WFI) camera on the 2.2-m MPG/ESO telescope at the ESO La Silla Observatory (Chile). It was produced by the combination of about 450 images with a total exposure time of nearly 50 hours. The field measures 36 x 34 arcmin 2 ; North is up and East is left. Technical information is available below. The combined efforts of three European teams of astronomers, targeting the same sky field in the southern constellation Fornax (The Oven) have enabled them to construct a very deep, true-colour image - opening an exceptionally clear view towards the distant universe . The image ( PR Photo 02a/03 ) covers an area somewhat larger than the full moon. It displays more than 100,000 galaxies, several thousand stars and hundreds of quasars. It is based on images with a total exposure time of nearly 50 hours, collected under good observing conditions with the Wide Field Imager (WFI) on the MPG/ESO 2.2m telescope at the ESO La Silla Observatory (Chile) - many of them extracted from the ESO Science Data Archive . The position of this southern sky field was chosen by Riccardo Giacconi (Nobel Laureate in Physics 2002) at a time when he was Director General of ESO, together with Piero Rosati (ESO). It was selected as a sky region towards which the NASA Chandra X-ray satellite observatory , launched in July 1999, would be pointed while carrying out a very long exposure (lasting a total of 1 million seconds, or 278 hours) in order to detect the faintest possible X-ray sources. The field is now known as the Chandra Deep Field South (CDF-S) . The new WFI photo of CDF-S does not reach quite as deep as the available images of the "Hubble Deep Fields" (HDF-N in the northern and HDF-S in the southern sky, cf. e.g. ESO PR Photo 35a/98 ), but the field-of-view is about 200 times larger. The present image displays about 50 times more galaxies than the HDF images, and therefore provides a more representative view of the universe . The WFI CDF-S image will now form a most useful basis for the very extensive and systematic census of the population of distant galaxies and quasars, allowing at once a detailed study of all evolutionary stages of the universe since it was about 2 billion years old . These investigations have started and are expected to provide information about the evolution of galaxies in unprecedented detail. They will offer insights into the history of star formation and how the internal structure of galaxies changes with time and, not least, throw light on how these two evolutionary aspects are interconnected. GALAXIES IN THE WFI IMAGE ESO PR Photo 02b/03 ESO PR Photo 02b/03 [Preview - JPEG: 488 x 400 pix - 112k] [Normal - JPEG: 896 x 800 pix - 1.0M] [Full-Res - JPEG: 2591 x 2313 pix - 8.6M] Caption : PR Photo 02b/03 contains a collection of twelve subfields from the full WFI Chandra Deep Field South (WFI CDF-S), centred on (pairs or groups of) galaxies. Each of the subfields measures 2.5 x 2.5 arcmin 2 (635 x 658 pix 2 ; 1 pixel = 0.238 arcsec). North is up and East is left. Technical information is available below. The WFI CDF-S colour image - of which the full field is shown in PR Photo 02a/03 - was constructed from all available observations in the optical B- ,V- and R-bands obtained under good conditions with the Wide Field Imager (WFI) on the 2.2-m MPG/ESO telescope at the ESO La Silla Observatory (Chile), and now stored in the ESO Science Data Archive. It is the "deepest" image ever taken with this instrument. It covers a sky field measuring 36 x 34 arcmin 2 , i.e., an area somewhat larger than that of the full moon. The observations were collected during a period of nearly four years, beginning in January 1999 when the WFI instrument was first installed (cf. ESO PR 02/99 ) and ending in October 2002. Altogether, nearly 50 hours of exposure were collected in the three filters combined here, cf. the technical information below. Although it is possible to identify more than 100,000 galaxies in the image - some of which are shown in PR Photo 02b/03 - it is still remarkably "empty" by astronomical standards. Even the brightest stars in the field (of visual magnitude 9) can hardly be seen by human observers with binoculars. In fact, the area density of bright, nearby galaxies is only half of what it is in "normal" sky fields. Comparatively empty fields like this one provide an unsually clear view towards the distant regions in the universe and thus open a window towards the earliest cosmic times . Research projects in the Chandra Deep Field South ESO PR Photo 02c/03 ESO PR Photo 02c/03 [Preview - JPEG: 400 x 513 pix - 112k] [Normal - JPEG: 800 x 1026 pix - 1.2M] [Full-Res - JPEG: 1717 x 2201 pix - 5.5M] ESO PR Photo 02d/03 ESO PR Photo 02d/03 [Preview - JPEG: 400 x 469 pix - 112k] [Normal - JPEG: 800 x 937 pix - 1.0M] [Full-Res - JPEG: 2545 x 2980 pix - 10.7M] Caption : PR Photo 02c-d/03 shows two sky fields within the WFI image of CDF-S, reproduced at full (pixel) size to illustrate the exceptional information richness of these data. The subfields measure 6.8 x 7.8 arcmin 2 (1717 x 1975 pixels) and 10.1 x 10.5 arcmin 2 (2545 x 2635 pixels), respectively. North is up and East is left. Technical information is available below. Astronomers from different teams and disciplines have been quick to join forces in a world-wide co-ordinated effort around the Chandra Deep Field South. Observations of this area are now being performed by some of the most powerful astronomical facilities and instruments. They include space-based X-ray and infrared observations by the ESA XMM-Newton , the NASA CHANDRA , Hubble Space Telescope (HST) and soon SIRTF (scheduled for launch in a few months), as well as imaging and spectroscopical observations in the infrared and optical part of the spectrum by telescopes at the ground-based observatories of ESO (La Silla and Paranal) and NOAO (Kitt Peak and Tololo). A huge database is currently being created that will help to analyse the evolution of galaxies in all currently feasible respects. All participating teams have agreed to make their data on this field publicly available, thus providing the world-wide astronomical community with a unique opportunity to perform competitive research, joining forces within this vast scientific project. Concerted observations The optical true-colour WFI image presented here forms an important part of this broad, concerted approach. It combines observations of three scientific teams that have engaged in complementary scientific projects, thereby capitalizing on this very powerful combination of their individual observations. The following teams are involved in this work: * COMBO-17 (Classifying Objects by Medium-Band Observations in 17 filters) : an international collaboration led by Christian Wolf and other scientists at the Max-Planck-Institut für Astronomie (MPIA, Heidelberg, Germany). This team used 51 hours of WFI observing time to obtain images through five broad-band and twelve medium-band optical filters in the visual spectral region in order to measure the distances (by means of "photometric redshifts") and star-formation rates of about 10,000 galaxies, thereby also revealing their evolutionary status. * EIS (ESO Imaging Survey) : a team of visiting astronomers from the ESO community and beyond, led by Luiz da Costa (ESO). They observed the CDF-S for 44 hours in six optical bands with the WFI camera on the MPG/ESO 2.2-m telescope and 28 hours in two near-infrared bands with the SOFI instrument at the ESO 3.5-m New Technology Telescope (NTT) , both at La Silla. These observations form part of the Deep Public Imaging Survey that covers a total sky area of 3 square degrees. * GOODS (The Great Observatories Origins Deep Survey) : another international team (on the ESO side, led by Catherine Cesarsky ) that focusses on the coordination of deep space- and ground-based observations on a smaller, central area of the CDF-S in order to image the galaxies in many differerent spectral wavebands, from X-rays to radio. GOODS has contributed with 40 hours of WFI time for observations in three broad-band filters that were designed for the selection of targets to be spectroscopically observed with the ESO Very Large Telescope (VLT) at the Paranal Observatory (Chile), for which over 200 hours of observations are planned. About 10,000 galaxies will be spectroscopically observed in order to determine their redshift (distance), star formation rate, etc. Another important contribution to this large research undertaking will come from the GEMS project. This is a "HST treasury programme" (with Hans-Walter Rix from MPIA as Principal Investigator) which observes the 10,000 galaxies identified in COMBO-17 - and eventually the entire WFI-field with HST - to show the evolution of their shapes with time. Great questions With the combination of data from many wavelength ranges now at hand, the astronomers are embarking upon studies of the many different processes in the universe. They expect to shed more light on several important cosmological questions, such as: * How and when was the first generation of stars born? * When exactly was the neutral hydrogen in the universe ionized the first time by powerful radiation emitted from the first stars and active galactic nuclei? * How did galaxies and groups of galaxies evolve during the past 13 billion years? * What is the true nature of those elusive objects that are only seen at the infrared and submillimetre wavelengths (cf. ESO PR 23/02 )? * Which fraction of galaxies had an "active" nucleus (probably with a black hole at the centre) in their past, and how long did this phase last? Moreover, since these extensive optical observations were obtained in the course of a dozen observing periods during several years, it is also possible to perform studies of certain variable phenomena: * How many variable sources are seen and what are their types and properties? * How many supernovae are detected per time interval, i.e. what is the supernovae frequency at different cosmic epochs? * How do those processes depend on each other? This is just a short and very incomplete list of questions astronomers world-wide will address using all the complementary observations. No doubt that the coming studies of the Chandra Deep Field South - with this and other data - will be most exciting and instructive! Other wide-field images Other wide-field images from the WFI have been published in various ESO press releases during the past four years - they are also available at the WFI Photo Gallery . A collection of full-resolution files (TIFF-format) is available on a WFI CD-ROM . Technical Information The very extensive data reduction and colour image processing needed to produce these images were performed by Mischa Schirmer and Thomas Erben at the "Wide Field Expertise Center" of the Institut für Astrophysik und Extraterrestrische Forschung der Universität Bonn (IAEF) in Germany. It was done by means of a software pipeline specialised for reduction of multiple CCD wide-field imaging camera data. This pipeline is mainly based on publicly available software modules and algorithms ( EIS , FLIPS , LDAC , Terapix , Wifix ). The image was constructed from about 150 exposures in each of the following wavebands: B-band (centred at wavelength 456 nm; here rendered as blue, 15.8 hours total exposure time), V-band (540 nm; green, 15.6 hours) and R-band (652 nm; red, 17.8 hours). Only images taken under sufficiently good observing conditions (defined as seeing less than 1.1 arcsec) were included. In total, 450 images were assembled to produce this colour image, together with about as many calibration images (biases, darks and flats). More than 2 Terabyte (TB) of temporary files were produced during the extensive data reduction. Parallel processing of all data sets took about two weeks on a four-processor Sun Enterprise 450 workstation and a 1.8 GHz dual processor Linux PC. The final colour image was assembled in Adobe Photoshop. The observations were performed by ESO (GOODS, EIS) and the COMBO-17 collaboration in the period 1/1999-10/2002.

Shadow of a Large Disc Casts New Light on the Formation of High Mass Stars

NASA Astrophysics Data System (ADS)

2004-05-01

Massive Star Observed that Forms through a Rotating Accretion Disc Summary Based on a large observational effort with different telescopes and instruments, mostly from the European Southern Observatory (ESO), a team of European astronomers [1] has shown that in the M 17 nebula a high mass star [2] forms via accretion through a circumstellar disc, i.e. through the same channel as low-mass stars. To reach this conclusion, the astronomers used very sensitive infrared instruments to penetrate the south-western molecular cloud of M 17 so that faint emission from gas heated up by a cluster of massive stars, partly located behind the molecular cloud, could be detected through the dust. Against the background of this hot region a large opaque silhouette, which resembles a flared disc seen nearly edge-on, is found to be associated with an hour-glass shaped reflection nebula. This system complies perfectly with a newly forming high-mass star surrounded by a huge accretion disc and accompanied by an energetic bipolar mass outflow. The new observations corroborate recent theoretical calculations which claim that stars up to 40 times more massive than the Sun can be formed by the same processes that are active during the formation of stars of smaller masses. PR Photo 15a/04: Stellar cluster and star-forming region M 17 (also available without text inside photo) PR Photo 15b/04: Silhouette disc seen in M 17 PR Photo 15c/04: Rotation of the disc in M 17. PR Photo 15d/04: Bipolar reflection nebula and silhouette disc of a young, massive star in M 17 PR Photo 15e/04: Optical spectrum of the bipolar nebula. PR Video 03/04: Zooming in onto the disc. The M 17 region ESO PR Photo 15a/04 ESO PR Photo 15a/04 [Preview - JPEG: 400 x 497 pix - 271k] [Normal - JPEG: 800 x 958 pix - 604k] ESO PR Photo 15a1/04 ESO PR Photo 15a/04 (without text within photo) [Preview - JPEG: 400 x 480 pix - 275k] [Normal - JPEG: 800 x 959 pix - 634k] [High-Res - JPEG: 3000 x 3597 pix - 3.8M] [Full-Res - JPEG: 3815 x 4574 pix - 5.4M] Caption: PR Photo 15a/04 is a reproduction of a three-colour composite of the sky region of M 17, a H II region excited by a cluster of young, hot stars. A large silhouette disc has been found to the south-west of the cluster centre. The area within the indicated square is shown in more detail in PR Photo 15b/04. The present image was obtained with the ISAAC near-infrared instrument at the 8.2-m VLT ANTU telescope at Paranal. In the left photo, the orientation and the scale at the distance of M 17 (7,000 light-years) are indicated, and the main regions are identified. To the right, this beautiful photo is available without text and in full resolution for reproduction purposes. While many details related to the formation and early evolution of low-mass stars like the Sun are now well understood, the basic scenario that leads to the formation of high-mass stars [2] still remains a mystery. Two possible scenarios for the formation of massive stars are currently being studied. In the first, such stars form by accretion of large amounts of circumstellar material; the infall onto the nascent star varies with time. Another possibility is formation by collision (coalescence) of protostars of intermediate masses, increasing the stellar mass in "jumps". In their continuing quest to add more pieces to the puzzle and help providing an answer to this fundamental question, a team of European astronomers [1] used a battery of telescopes, mostly at two of the European Southern Observatory's Chilean sites of La Silla and Paranal, to study in unsurpassed detail the Omega nebula. The Omega nebula, also known as the 17th object in the list of famous French astronomer Charles Messier, i.e. Messier 17 or M 17, is one of the most prominent star forming regions in our Galaxy. It is located at a distance of 7,000 light-years. M 17 is extremely young - in astronomical terms - as witnessed by the presence of a cluster of high-mass stars that ionise the surrounding hydrogen gas and create a so-called H II region. The total luminosity of these stars exceeds that of our Sun by almost a factor of ten million. Adjacent to the south-western edge of the H II region, there is a huge cloud of molecular gas which is believed to be a site of ongoing star formation. In order to search for newly forming high-mass stars, Rolf Chini of the Ruhr-Universität Bochum (Germany) and his collaborators have recently investigated the interface between the H II region and the molecular cloud by means of very deep optical and infrared imaging between 0.4 and 2.2 µm. This was done with ISAAC (at 1.25, 1.65 and 2.2 µm) at the ESO Very Large Telescope (VLT) on Cerro Paranal in September 2002 and with EMMI (at 0.45, 0.55, 0.8 µm) at the ESO New Technology Telescope (NTT), La Silla, in July 2003. The image quality was limited by atmospheric turbulence and varied between 0.4 and 0.8 arcsec. The result of these efforts is shown in PR Photo 15a/04. Rolf Chini is pleased: "Our measurements are so sensitive that the south-western molecular cloud of M 17 is penetrated and the faint nebular emission of the H II region, which is partly located behind the molecular cloud, could be detected through the dust." Against the nebular background of the H II region a large opaque silhouette is seen associated with an hourglass shaped reflection nebula. The silhouette disc ESO PR Photo 15b/04 ESO PR Photo 15b/04 [Preview - JPEG: 400 x 475 pix - 348k] [Normal - JPEG: 800 x 950 pix - 907k] Caption: PR Photo 15b/04 shows a Ks-band image of the silhouette disc obtained with the NACO Adaptive Optics camera at the 8.2-m VLT YEPUN telescope at Paranal. The displayed field-of-view is outlined in PR Photo 15a/04. White contours delineate the densest part of the disc (inner torus). The visible stars (slightly elongated due to the adaptive optics technique) are embedded within the molecular cloud but are probably unrelated to the disc. The insert shows a deconvolved zoomed version of the central object of about 450 x 240 AU; its major axis is tilted by about 15 degrees against the direction perpendicular to the disc. ESO PR Video Clip 03/04 ESO PR Video Clip 03/04 [QuickTime Video+Audio; 160x120 pix; 18Mb] Caption: PR Video Clip 03/04 zooms in towards the disc, starting from the ISAAC image of the full nebula to the NACO image of the silhouette disc. This shows the remarkable power of the set of instruments on the Very Large Telescope. ESO PR Photo 15c/04 ESO PR Photo 15c/04 [Preview - JPEG: 533 x 400 pix - 80k] [Normal - JPEG: 1067 x 800 pix - 185k] Caption: PR Photo 15c/04 Position-velocity diagram revealing the rotation of the disc. It is derived from a cut along the major axis of the disc, using the IRAM Plateau de Bure interferometer. For comparison, the theoretically expected position-velocity curve for an edge-on disc around a star of 15 solar masses is shown, the outer part of which (radii larger than about 15,400 AU) is in Keplerian rotation while its inner part is modeled as a rigid rotator. To obtain a better view of the structure, the team of astronomers turned then to Adaptive Optics imaging using the NAOS-CONICA instrument on the VLT. Adaptive optics is a "wonder-weapon" in ground-based astronomy, allowing astronomers to "neutralize" the image-smearing turbulence of the terrestrial atmosphere (seen by the unaided eye as the twinkling of stars) so that much sharper images can be obtained. With NAOS-CONICA on the VLT, the astronomers were able to obtain images with a resolution better than one tenth of the "seeing", that is, as what they could observe with ISAAC. PR Photo 15b/04 shows the high-resolution near-infrared (2.2 µm) image they obtained. It clearly suggests that the morphology of the silhouette resembles a flared disc, seen nearly edge-on. The disc has a diameter of about 20,000 AU [3] - which is 500 times the distance of the farthest planet in our solar system - and is by far the largest circumstellar disc ever detected. To study the disc structure and properties, the astronomers then turned to radio astronomy and carried out molecular line spectroscopy at the IRAM Plateau de Bure interferometer near Grenoble (France) in April 2003. The astronomers have observed the region in the rotational transitions of the 12CO, 13CO and C18O molecules, and in the adjacent continuum at 3 mm. Velocity resolutions of 0.1 and 0.2 km/s, respectively, were achieved. Dieter Nürnberger, member of the team, sees this as a confirmation: "Our 13CO data obtained with IRAM indicate that the disc/envelope system slowly rotates with its north-western part approaching the observer." Over an extent of 30,800 AU a velocity shift of 1.7 km/s is indeed measured (PR Photo 15c/04). From these observations, adopting standard values for the abundance ratio between the different isotopic carbon monoxide molecules (12CO and 13CO) and for the conversion factor to derive molecular hydrogen densities from the mesured CO intensities, the astronomers were also able to derive a conservative lower limit for the disc mass of 110 solar masses. This is by far the most massive and largest accretion disc ever observed directly around a young massive star. The largest silhouette disc so far is known as 114-426 in Orion and has a diameter of about 1,000 AU; however, its central star is likely a low-mass object rather than a massive protostar. Although there are a small number of candidates for massive young stellar objects (YSOs) some of which are associated with outflows, the largest circumstellar disc hitherto detected around these objects has a diameter of only 130 AU. The bipolar nebula ESO PR Photo 15d/04 ESO PR Photo 15d/04 [Preview - JPEG: 450 x 400 pix - 119k] [Normal - JPEG: 913 x 800 pix - 272k] Caption: PR Photo 15d/04 displays a collection of images of the silhouette disc and, perpendicular to that, the bipolar reflection nebula. These images were obtained in different optical and near-infrared wavebands with different instruments: EMMI at the ESO New Technology Telescope on La Silla (top row; wavelengths 0.45 [B-band], 0.55 [V-band], 0.8 µm [I-band], respectively) and ISAAC at the ESO Very Large Telescope on Cerro Paranal (bottom row; 1.25 [J], 1.65 [H] and 2.2 µm [K]). All images are centred on the central massive protostar and cover an area of 30 x 30 arcsec2, corresponding to 1.0 x 1.0 light-years2 at the distance of M 17 (about 7,000 light-years). The obscuration diminishes with increasing wavelength and the background emission of the H II region becomes more and more evident (represented by entirely black colours at K). ESO PR Photo 15e/04 ESO PR Photo 15e/04 [Preview - JPEG: 757 x 400 pix - 136k] [Normal - JPEG: 1513 x 800 pix - 311k] Caption: PR Photo 15e/04 shows an optical spectrum of the bipolar nebula, obtained with EFOSC2 at the ESO 3.6 m telescope and with EMMI at the ESO 3.5 m NTT, both located on La Silla, Chile. A number of identified emission lines, like Hα and the Ca II triplet 849.8, 854.2 and 866.2 nm, are denoted. The second morphological structure that is visible on all images throughout the entire spectral range from visible to infrared (0.4 to 2.2 µm) is an hourglass-shaped nebula perpendicular to the plane of the disc (PR Photo 15d/04). This is believed to be an energetic outflow coming from the central massive object. To confirm this, the astronomers went back to ESO's telescopes to perform spectroscopic observations. The optical spectra of the bipolar outflow were measured in April/June 2003 with EFOSC2 at the ESO 3.6 m telescope and with EMMI at the ESO 3.5 m NTT, both located on La Silla, Chile. The observed spectrum (PR Photo 15e/04) is dominated by the emission lines of hydrogen (Hα), calcium (the Ca II triplet 849.8, 854.2 and 866.2 nm), and helium (He I 667.8 nm). In the case of low-mass stars, these lines provide indirect evidence for ongoing accretion from the inner disc onto the star. The Ca II triplet was also shown to be a product of disc accretion for both a large sample of low and intermediate-mass protostars, known as T Tauri and Herbig Ae/Be stars, respectively. Moreover, the Hα line is extremely broad and shows a deep blue-shifted absorption typically associated with accretion disc-driven outflows. In the spectrum, numerous iron (Fe II) lines were also observed, which are velocity-shifted by ± 120 km/s. This is clear evidence for the existence of shocks with velocities of more than 50 km/s, hence another confirmation of the outflow hypothesis. The central protostar Due to heavy extinction, the nature of an accreting protostellar object, i.e. a star in the process of formation, is usually difficult to infer. Accessible are only those that are located in the neighbourhood of their elder brethren, e.g. next to a cluster of hot stars (cf. ESO PR 15/03). Such already evolved massive stars are a rich source of energetic photons and produce powerful stellar winds of protons (like the "solar wind" but much stronger) which impact on the surrounding interstellar gas and dust clouds. This process may lead to partial evaporation and dispersion of those clouds, thereby "lifting the curtain" and allowing us to look directly at young stars in that region. However, for all high-mass protostellar candidates located away from such a hostile environment there is not a single direct evidence for a (proto-)stellar central object; likewise, the origin of the luminosity - typically about ten thousand solar luminosities - is unclear and may be due to multiple objects or even embedded clusters. The new disc in M 17 is the only system which exhibits a central object at the expected position of the forming star. The 2.2 µm emission is relatively compact (240 AU x 450 AU) - too small to host a cluster of stars. Assuming that the emission is due solely to the star, the astronomers derive an absolute infrared brightness of about K = -2.5 magnitudes which would correspond to a main sequence star of about 20 solar masses. Given the fact that the accretion process is still active, and that models predict that about 30-50% of the circumstellar material can be accumulated onto the central object, it is likely that in the present case a massive protostar is currently being born. Theoretical calculations show that an initial gas cloud of 60 to 120 solar masses may evolve into a star of approximately 30-40 solar masses while the remaining mass is rejected into the interstellar medium. The present observations may be the first to show this happening.

Low-altitude aerial color digital photographic survey of the San Andreas Fault

USGS Publications Warehouse

Lynch, David K.; Hudnut, Kenneth W.; Dearborn, David S.P.

2010-01-01

Ever since 1858, when Gaspard-Félix Tournachon (pen name Félix Nadar) took the first aerial photograph (Professional Aerial Photographers Association 2009), the scientific value and popular appeal of such pictures have been widely recognized. Indeed, Nadar patented the idea of using aerial photographs in mapmaking and surveying. Since then, aerial imagery has flourished, eventually making the leap to space and to wavelengths outside the visible range. Yet until recently, the availability of such surveys has been limited to technical organizations with significant resources. Geolocation required extensive time and equipment, and distribution was costly and slow. While these situations still plague older surveys, modern digital photography and lidar systems acquire well-calibrated and easily shared imagery, although expensive, platform-specific software is sometimes still needed to manage and analyze the data. With current consumer-level electronics (cameras and computers) and broadband internet access, acquisition and distribution of large imaging data sets are now possible for virtually anyone. In this paper we demonstrate a simple, low-cost means of obtaining useful aerial imagery by reporting two new, high-resolution, low-cost, color digital photographic surveys of selected portions of the San Andreas fault in California. All pictures are in standard jpeg format. The first set of imagery covers a 92-km-long section of the fault in Kern and San Luis Obispo counties and includes the entire Carrizo Plain. The second covers the region from Lake of the Woods to Cajon Pass in Kern, Los Angeles, and San Bernardino counties (151 km) and includes Lone Pine Canyon soon after the ground was largely denuded by the Sheep Fire of October 2009. The first survey produced a total of 1,454 oblique digital photographs (4,288 x 2,848 pixels, average 6 Mb each) and the second produced 3,762 nadir images from an elevation of approximately 150 m above ground level (AGL) on the southeast leg and 300 m AGL on the northwest leg. Spatial resolution (pixel size or ground sample distance) is a few centimeters. Time and geographic coordinates of the aircraft were automatically written into the exchangeable image file format (EXIF) data within each jpeg photograph. A few hours after acquisition and validation, the photographs were uploaded to a publically accessible Web page. The goal was to obtain quick-turnaround, low-cost, high-resolution, overlapping, and contiguous imagery for use in planning field operations, and to provide imagery for a wide variety of land use and educational studies. This work was carried out in support of ongoing geological research on the San Andreas fault, but the technique is widely applicable beyond geology.

Protection and governance of MPEG-21 music player MAF contents using MPEG-21 IPMP tools

NASA Astrophysics Data System (ADS)

Hendry; Kim, Munchurl

2006-02-01

MPEG (Moving Picture Experts Groups) is currently standardizing Multimedia Application Format (MAF) which targets to provide simple but practical multimedia applications to the industry. One of the interesting and on-going working items of MAF activity is the so-called Music Player MAF which combines MPEG-1/2 layer III (MP3), JPEG image, and metadata into a standard format. In this paper, we propose a protection and governance mechanism to the Music Player MAF by incorporating other MPEG technology, MPEG-21 IPMP (Intellectual Property Management and Protection). We show, in this paper, use-case of the distribution and consumption of this Music Player contents, requirements, and how this protection and governance can be implemented in conjunction with the current Music Player MAF architecture and file system. With the use of MPEG-21 IPMP, the protection and governance to the content of Music Player MAF fulfils flexibility, extensibility, and granular in protection requirements.

Design and evaluation of web-based image transmission and display with different protocols

NASA Astrophysics Data System (ADS)

Tan, Bin; Chen, Kuangyi; Zheng, Xichuan; Zhang, Jianguo

2011-03-01

There are many Web-based image accessing technologies used in medical imaging area, such as component-based (ActiveX Control) thick client Web display, Zerofootprint thin client Web viewer (or called server side processing Web viewer), Flash Rich Internet Application(RIA) ,or HTML5 based Web display. Different Web display methods have different peformance in different network environment. In this presenation, we give an evaluation on two developed Web based image display systems. The first one is used for thin client Web display. It works between a PACS Web server with WADO interface and thin client. The PACS Web server provides JPEG format images to HTML pages. The second one is for thick client Web display. It works between a PACS Web server with WADO interface and thick client running in browsers containing ActiveX control, Flash RIA program or HTML5 scripts. The PACS Web server provides native DICOM format images or JPIP stream for theses clients.

Fingerprint recognition of wavelet-based compressed images by neuro-fuzzy clustering

NASA Astrophysics Data System (ADS)

Liu, Ti C.; Mitra, Sunanda

1996-06-01

Image compression plays a crucial role in many important and diverse applications requiring efficient storage and transmission. This work mainly focuses on a wavelet transform (WT) based compression of fingerprint images and the subsequent classification of the reconstructed images. The algorithm developed involves multiresolution wavelet decomposition, uniform scalar quantization, entropy and run- length encoder/decoder and K-means clustering of the invariant moments as fingerprint features. The performance of the WT-based compression algorithm has been compared with JPEG current image compression standard. Simulation results show that WT outperforms JPEG in high compression ratio region and the reconstructed fingerprint image yields proper classification.

Development of a mobile emergency patient information and imaging communication system based on CDMA-1X EVDO

NASA Astrophysics Data System (ADS)

Yang, Keon Ho; Jung, Haijo; Kang, Won-Suk; Jang, Bong Mun; Kim, Joong Il; Han, Dong Hoon; Yoo, Sun-Kook; Yoo, Hyung-Sik; Kim, Hee-Joung

2006-03-01

The wireless mobile service with a high bit rate using CDMA-1X EVDO is now widely used in Korea. Mobile devices are also increasingly being used as the conventional communication mechanism. We have developed a web-based mobile system that communicates patient information and images, using CDMA-1X EVDO for emergency diagnosis. It is composed of a Mobile web application system using the Microsoft Windows 2003 server and an internet information service. Also, a mobile web PACS used for a database managing patient information and images was developed by using Microsoft access 2003. A wireless mobile emergency patient information and imaging communication system is developed by using Microsoft Visual Studio.NET, and JPEG 2000 ActiveX control for PDA phone was developed by using the Microsoft Embedded Visual C++. Also, the CDMA-1X EVDO is used for connections between mobile web servers and the PDA phone. This system allows fast access to the patient information database, storing both medical images and patient information anytime and anywhere. Especially, images were compressed into a JPEG2000 format and transmitted from a mobile web PACS inside the hospital to the radiologist using a PDA phone located outside the hospital. Also, this system shows radiological images as well as physiological signal data, including blood pressure, vital signs and so on, in the web browser of the PDA phone so radiologists can diagnose more effectively. Also, we acquired good results using an RW-6100 PDA phone used in the university hospital system of the Sinchon Severance Hospital in Korea.

EBLAST: an efficient high-compression image transformation 3. application to Internet image and video transmission

NASA Astrophysics Data System (ADS)

Schmalz, Mark S.; Ritter, Gerhard X.; Caimi, Frank M.

2001-12-01

A wide variety of digital image compression transforms developed for still imaging and broadcast video transmission are unsuitable for Internet video applications due to insufficient compression ratio, poor reconstruction fidelity, or excessive computational requirements. Examples include hierarchical transforms that require all, or large portion of, a source image to reside in memory at one time, transforms that induce significant locking effect at operationally salient compression ratios, and algorithms that require large amounts of floating-point computation. The latter constraint holds especially for video compression by small mobile imaging devices for transmission to, and compression on, platforms such as palmtop computers or personal digital assistants (PDAs). As Internet video requirements for frame rate and resolution increase to produce more detailed, less discontinuous motion sequences, a new class of compression transforms will be needed, especially for small memory models and displays such as those found on PDAs. In this, the third series of papers, we discuss the EBLAST compression transform and its application to Internet communication. Leading transforms for compression of Internet video and still imagery are reviewed and analyzed, including GIF, JPEG, AWIC (wavelet-based), wavelet packets, and SPIHT, whose performance is compared with EBLAST. Performance analysis criteria include time and space complexity and quality of the decompressed image. The latter is determined by rate-distortion data obtained from a database of realistic test images. Discussion also includes issues such as robustness of the compressed format to channel noise. EBLAST has been shown to perform superiorly to JPEG and, unlike current wavelet compression transforms, supports fast implementation on embedded processors with small memory models.

Titanic Weather Forecasting

NASA Astrophysics Data System (ADS)

2004-04-01

New Detailed VLT Images of Saturn's Largest Moon Optimizing space missions Titan, the largest moon of Saturn was discovered by Dutch astronomer Christian Huygens in 1655 and certainly deserves its name. With a diameter of no less than 5,150 km, it is larger than Mercury and twice as large as Pluto. It is unique in having a hazy atmosphere of nitrogen, methane and oily hydrocarbons. Although it was explored in some detail by the NASA Voyager missions, many aspects of the atmosphere and surface still remain unknown. Thus, the existence of seasonal or diurnal phenomena, the presence of clouds, the surface composition and topography are still under debate. There have even been speculations that some kind of primitive life (now possibly extinct) may be found on Titan. Titan is the main target of the NASA/ESA Cassini/Huygens mission, launched in 1997 and scheduled to arrive at Saturn on July 1, 2004. The ESA Huygens probe is designed to enter the atmosphere of Titan, and to descend by parachute to the surface. Ground-based observations are essential to optimize the return of this space mission, because they will complement the information gained from space and add confidence to the interpretation of the data. Hence, the advent of the adaptive optics system NAOS-CONICA (NACO) [1] in combination with ESO's Very Large Telescope (VLT) at the Paranal Observatory in Chile now offers a unique opportunity to study the resolved disc of Titan with high sensitivity and increased spatial resolution. Adaptive Optics (AO) systems work by means of a computer-controlled deformable mirror that counteracts the image distortion induced by atmospheric turbulence. It is based on real-time optical corrections computed from image data obtained by a special camera at very high speed, many hundreds of times each second (see e.g. ESO Press Release 25/01 , ESO PR Photos 04a-c/02, ESO PR Photos 19a-c/02, ESO PR Photos 21a-c/02, ESO Press Release 17/02, and ESO Press Release 26/03 for earlier NACO images, and ESO Press Release 11/03 for MACAO-VLTI results.) The southern smile ESO PR Photo 08a/04 ESO PR Photo 08a/04 Images of Titan on November 20, 25 and 26, 2002 Through Five Filters (VLT YEPUN + NACO) [Preview - JPEG: 522 x 400 pix - 40k] [Normal - JPEG: 1043 x 800 pix - 340k] [Hires - JPEG: 2875 x 2205 pix - 1.2M] Caption: ESO PR Photo 08a/04 shows Titan (apparent visual magnitude 8.05, apparent diameter 0.87 arcsec) as observed with the NAOS/CONICA instrument at VLT Yepun (Paranal Observatory, Chile) on November 20, 25 and 26, 2003, between 6.00 UT and 9.00 UT. The median seeing values were 1.1 arcsec and 1.5 arcsec respectively for the 20th and 25th. Deconvoluted ("sharpened") images of Titan are shown through 5 different narrow-band filters - they allow to probe in some detail structures at different altitudes and on the surface. Depending on the filter, the integration time varies from 10 to 100 seconds. While Titan shows its leading hemisphere (i.e. the one observed when Titan moves towards us) on Nov. 20, the trailing side (i.e the one we see when Titan moves away from us in its course around Saturn) - which displays less bright surface features - is observed on the last two dates. ESO PR Photo 08b/04 ESO PR Photo 08b/04 Titan Observed Through Nine Different Filters on November 26, 2002 [Preview - JPEG: 480 x 400 pix - 36k] [Normal - JPEG: 960 x 800 pix - 284k] Caption: ESO PR Photo 08b/04: Images of Titan taken on November 26, 2002 through nine different filters to probe different altitudes, ranging from the stratosphere to the surface. On this night, a stable "seeing" (image quality before adaptive optics correction) of 0.9 arcsec allowed the astronomers to attain the diffraction limit of the telescope (0.032 arcsec resolution). Due to these good observing conditions, Titan's trailing hemisphere was observed with contrasts of about 40%, allowing the detection of several bright features on this surface region, once thought to be quite dark and featureless. ESO PR Photo 08c/04 ESO PR Photo 08c/04 Titan Surface Projections [Preview - JPEG: 601 x 400 pix - 64k] [Normal - JPEG: 1201 x 800 pix - 544k] Caption: ESO PR Photo 08c/04 : Titan images obtained with NACO on November 26th, 2002. Left: Titan's surface projection on the trailing hemisphere as observed at 1.3 μm, revealing a complex brightness structure thanks to the high image contrast of about 40%. Right: a new, possibly meteorological, phenomenon observed at 2.12 μm in Titan's atmosphere, in the form of a bright feature revolving around the South Pole. A team of French astronomers [2] have recently used the NACO state-of-the-art adaptive optics system on the fourth 8.2-m VLT unit telescope, Yepun, to map the surface of Titan by means of near-infrared images and to search for changes in the dense atmosphere. These extraordinary images have a nominal resolution of 1/30th arcsec and show details of the order of 200 km on the surface of Titan. To provide the best possible views, the raw data from the instrument were subjected to deconvolution (image sharpening). Images of Titan were obtained through 9 narrow-band filters, sampling near-infrared wavelengths with large variations in methane opacity. This permits sounding of different altitudes ranging from the stratosphere to the surface. Titan harbours at 1.24 and 2.12 μm a "southern smile", that is a north-south asymmetry, while the opposite situation is observed with filters probing higher altitudes, such as 1.64, 1.75 and 2.17 μm. A high-contrast bright feature is observed at the South Pole and is apparently caused by a phenomenon in the atmosphere, at an altitude below 140 km or so. This feature was found to change its location on the images from one side of the south polar axis to the other during the week of observations. Outlook An additional series of NACO observations of Titan is foreseen later this month (April 2004). These will be a great asset in helping optimize the return of the Cassini/Huygens mission. Several of the instruments aboard the spacecraft depend on such ground-based data to better infer the properties of Titan's surface and lower atmosphere. Although the astronomers have yet to model and interpret the physical and geophysical phenomena now observed and to produce a full cartography of the surface, this first analysis provides a clear demonstration of the marvellous capabilities of the NACO imaging system. More examples of the exciting science possible with this facility will be found in a series of five papers published today in the European research journal Astronomy & Astrophysics (Vol. 47, L1 to L24).

IIPImage: Large-image visualization

NASA Astrophysics Data System (ADS)

Pillay, Ruven

2014-08-01

IIPImage is an advanced high-performance feature-rich image server system that enables online access to full resolution floating point (as well as other bit depth) images at terabyte scales. Paired with the VisiOmatic (ascl:1408.010) celestial image viewer, the system can comfortably handle gigapixel size images as well as advanced image features such as both 8, 16 and 32 bit depths, CIELAB colorimetric images and scientific imagery such as multispectral images. Streaming is tile-based, which enables viewing, navigating and zooming in real-time around gigapixel size images. Source images can be in either TIFF or JPEG2000 format. Whole images or regions within images can also be rapidly and dynamically resized and exported by the server from a single source image without the need to store multiple files in various sizes.

File Management In Space

NASA Technical Reports Server (NTRS)

Critchfield, Anna R.; Zepp, Robert H.

2000-01-01

We propose that the user interact with the spacecraft as if the spacecraft were a file server, so that the user can select and receive data as files in standard formats (e.g., tables or images, such as jpeg) via the Internet. Internet technology will be used end-to-end from the spacecraft to authorized users, such as the flight operation team, and project scientists. The proposed solution includes a ground system and spacecraft architecture, mission operations scenarios, and an implementation roadmap showing migration from current practice to the future, where distributed users request and receive files of spacecraft data from archives or spacecraft with equal ease. This solution will provide ground support personnel and scientists easy, direct, secure access to their authorized data without cumbersome processing, and can be extended to support autonomous communications with the spacecraft.

An Efficient Image Compressor for Charge Coupled Devices Camera

PubMed Central

Li, Jin; Xing, Fei; You, Zheng

2014-01-01

Recently, the discrete wavelet transforms- (DWT-) based compressor, such as JPEG2000 and CCSDS-IDC, is widely seen as the state of the art compression scheme for charge coupled devices (CCD) camera. However, CCD images project on the DWT basis to produce a large number of large amplitude high-frequency coefficients because these images have a large number of complex texture and contour information, which are disadvantage for the later coding. In this paper, we proposed a low-complexity posttransform coupled with compressing sensing (PT-CS) compression approach for remote sensing image. First, the DWT is applied to the remote sensing image. Then, a pair base posttransform is applied to the DWT coefficients. The pair base are DCT base and Hadamard base, which can be used on the high and low bit-rate, respectively. The best posttransform is selected by the l p-norm-based approach. The posttransform is considered as the sparse representation stage of CS. The posttransform coefficients are resampled by sensing measurement matrix. Experimental results on on-board CCD camera images show that the proposed approach significantly outperforms the CCSDS-IDC-based coder, and its performance is comparable to that of the JPEG2000 at low bit rate and it does not have the high excessive implementation complexity of JPEG2000. PMID:25114977

Optimizing Cloud Based Image Storage, Dissemination and Processing Through Use of Mrf and Lerc

NASA Astrophysics Data System (ADS)

Becker, Peter; Plesea, Lucian; Maurer, Thomas

2016-06-01

The volume and numbers of geospatial images being collected continue to increase exponentially with the ever increasing number of airborne and satellite imaging platforms, and the increasing rate of data collection. As a result, the cost of fast storage required to provide access to the imagery is a major cost factor in enterprise image management solutions to handle, process and disseminate the imagery and information extracted from the imagery. Cloud based object storage offers to provide significantly lower cost and elastic storage for this imagery, but also adds some disadvantages in terms of greater latency for data access and lack of traditional file access. Although traditional file formats geoTIF, JPEG2000 and NITF can be downloaded from such object storage, their structure and available compression are not optimum and access performance is curtailed. This paper provides details on a solution by utilizing a new open image formats for storage and access to geospatial imagery optimized for cloud storage and processing. MRF (Meta Raster Format) is optimized for large collections of scenes such as those acquired from optical sensors. The format enables optimized data access from cloud storage, along with the use of new compression options which cannot easily be added to existing formats. The paper also provides an overview of LERC a new image compression that can be used with MRF that provides very good lossless and controlled lossy compression.

Cipher image damage and decisions in real time

NASA Astrophysics Data System (ADS)

Silva-García, Victor Manuel; Flores-Carapia, Rolando; Rentería-Márquez, Carlos; Luna-Benoso, Benjamín; Jiménez-Vázquez, Cesar Antonio; González-Ramírez, Marlon David

2015-01-01

This paper proposes a method for constructing permutations on m position arrangements. Our objective is to encrypt color images using advanced encryption standard (AES), using variable permutations means a different one for each 128-bit block in the first round after the x-or operation is applied. Furthermore, this research offers the possibility of knowing the original image when the encrypted figure suffered a failure from either an attack or not. This is achieved by permuting the original image pixel positions before being encrypted with AES variable permutations, which means building a pseudorandom permutation of 250,000 position arrays or more. To this end, an algorithm that defines a bijective function between the nonnegative integer and permutation sets is built. From this algorithm, the way to build permutations on the 0,1,…,m-1 array, knowing m-1 constants, is presented. The transcendental numbers are used to select these m-1 constants in a pseudorandom way. The quality of the proposed encryption according to the following criteria is evaluated: the correlation coefficient, the entropy, and the discrete Fourier transform. A goodness-of-fit test for each basic color image is proposed to measure the bits randomness degree of the encrypted figure. On the other hand, cipher images are obtained in a loss-less encryption way, i.e., no JPEG file formats are used.

Helioviewer.org: An Open-source Tool for Visualizing Solar Data

NASA Astrophysics Data System (ADS)

Hughitt, V. Keith; Ireland, J.; Schmiedel, P.; Dimitoglou, G.; Mueller, D.; Fleck, B.

2009-05-01

As the amount of solar data available to scientists continues to increase at faster and faster rates, it is important that there exist simple tools for navigating this data quickly with a minimal amount of effort. By combining heterogeneous solar physics datatypes such as full-disk images and coronagraphs, along with feature and event information, Helioviewer offers a simple and intuitive way to browse multiple datasets simultaneously. Images are stored in a repository using the JPEG 2000 format and tiled dynamically upon a client's request. By tiling images and serving only the portions of the image requested, it is possible for the client to work with very large images without having to fetch all of the data at once. Currently, Helioviewer enables users to browse the entire SOHO data archive, updated hourly, as well as data feature/event catalog data from eight different catalogs including active region, flare, coronal mass ejection, type II radio burst data. In addition to a focus on intercommunication with other virtual observatories and browsers (VSO, HEK, etc), Helioviewer will offer a number of externally-available application programming interfaces (APIs) to enable easy third party use, adoption and extension. Future functionality will include: support for additional data-sources including TRACE, SDO and STEREO, dynamic movie generation, a navigable timeline of recorded solar events, social annotation, and basic client-side image processing.

Cloud Optimized Image Format and Compression

NASA Astrophysics Data System (ADS)

Becker, P.; Plesea, L.; Maurer, T.

2015-04-01

Cloud based image storage and processing requires revaluation of formats and processing methods. For the true value of the massive volumes of earth observation data to be realized, the image data needs to be accessible from the cloud. Traditional file formats such as TIF and NITF were developed in the hay day of the desktop and assumed fast low latency file access. Other formats such as JPEG2000 provide for streaming protocols for pixel data, but still require a server to have file access. These concepts no longer truly hold in cloud based elastic storage and computation environments. This paper will provide details of a newly evolving image storage format (MRF) and compression that is optimized for cloud environments. Although the cost of storage continues to fall for large data volumes, there is still significant value in compression. For imagery data to be used in analysis and exploit the extended dynamic range of the new sensors, lossless or controlled lossy compression is of high value. Compression decreases the data volumes stored and reduces the data transferred, but the reduced data size must be balanced with the CPU required to decompress. The paper also outlines a new compression algorithm (LERC) for imagery and elevation data that optimizes this balance. Advantages of the compression include its simple to implement algorithm that enables it to be efficiently accessed using JavaScript. Combing this new cloud based image storage format and compression will help resolve some of the challenges of big image data on the internet.

Recce imagery compression options

NASA Astrophysics Data System (ADS)

Healy, Donald J.

1995-09-01

The errors introduced into reconstructed RECCE imagery by ATARS DPCM compression are compared to those introduced by the more modern DCT-based JPEG compression algorithm. For storage applications in which uncompressed sensor data is available JPEG provides better mean-square-error performance while also providing more flexibility in the selection of compressed data rates. When ATARS DPCM compression has already been performed, lossless encoding techniques may be applied to the DPCM deltas to achieve further compression without introducing additional errors. The abilities of several lossless compression algorithms including Huffman, Lempel-Ziv, Lempel-Ziv-Welch, and Rice encoding to provide this additional compression of ATARS DPCM deltas are compared. It is shown that the amount of noise in the original imagery significantly affects these comparisons.

Limited distortion in LSB steganography

NASA Astrophysics Data System (ADS)

Kim, Younhee; Duric, Zoran; Richards, Dana

2006-02-01

It is well known that all information hiding methods that modify the least significant bits introduce distortions into the cover objects. Those distortions have been utilized by steganalysis algorithms to detect that the objects had been modified. It has been proposed that only coefficients whose modification does not introduce large distortions should be used for embedding. In this paper we propose an effcient algorithm for information hiding in the LSBs of JPEG coefficients. Our algorithm uses parity coding to choose the coefficients whose modifications introduce minimal additional distortion. We derive the expected value of the additional distortion as a function of the message length and the probability distribution of the JPEG quantization errors of cover images. Our experiments show close agreement between the theoretical prediction and the actual additional distortion.

Antarctica

Atmospheric Science Data Center

2013-04-16

article title:  Twilight in Antarctica     View larger JPEG ... SpectroRadiometer (MISR) instrument on board Terra. The Ross Ice Shelf and Transantarctic Mountains are illuminated by low Sun. MISR was ...

Lossless Data Embedding—New Paradigm in Digital Watermarking

NASA Astrophysics Data System (ADS)

Fridrich, Jessica; Goljan, Miroslav; Du, Rui

2002-12-01

One common drawback of virtually all current data embedding methods is the fact that the original image is inevitably distorted due to data embedding itself. This distortion typically cannot be removed completely due to quantization, bit-replacement, or truncation at the grayscales 0 and 255. Although the distortion is often quite small and perceptual models are used to minimize its visibility, the distortion may not be acceptable for medical imagery (for legal reasons) or for military images inspected under nonstandard viewing conditions (after enhancement or extreme zoom). In this paper, we introduce a new paradigm for data embedding in images (lossless data embedding) that has the property that the distortion due to embedding can be completely removed from the watermarked image after the embedded data has been extracted. We present lossless embedding methods for the uncompressed formats (BMP, TIFF) and for the JPEG format. We also show how the concept of lossless data embedding can be used as a powerful tool to achieve a variety of nontrivial tasks, including lossless authentication using fragile watermarks, steganalysis of LSB embedding, and distortion-free robust watermarking.

Computer image analysis in obtaining characteristics of images: greenhouse tomatoes in the process of generating learning sets of artificial neural networks

NASA Astrophysics Data System (ADS)

Zaborowicz, M.; Przybył, J.; Koszela, K.; Boniecki, P.; Mueller, W.; Raba, B.; Lewicki, A.; Przybył, K.

2014-04-01

The aim of the project was to make the software which on the basis on image of greenhouse tomato allows for the extraction of its characteristics. Data gathered during the image analysis and processing were used to build learning sets of artificial neural networks. Program enables to process pictures in jpeg format, acquisition of statistical information of the picture and export them to an external file. Produced software is intended to batch analyze collected research material and obtained information saved as a csv file. Program allows for analysis of 33 independent parameters implicitly to describe tested image. The application is dedicated to processing and image analysis of greenhouse tomatoes. The program can be used for analysis of other fruits and vegetables of a spherical shape.

Development of an electronic medical report delivery system to 3G GSM mobile (cellular) phones for a medical imaging department.

PubMed

Lim, Eugene Y; Lee, Chiang; Cai, Weidong; Feng, Dagan; Fulham, Michael

2007-01-01

Medical practice is characterized by a high degree of heterogeneity in collaborative and cooperative patient care. Fast and effective communication between medical practitioners can improve patient care. In medical imaging, the fast delivery of medical reports to referring medical practitioners is a major component of cooperative patient care. Recently, mobile phones have been actively deployed in telemedicine applications. The mobile phone is an ideal medium to achieve faster delivery of reports to the referring medical practitioners. In this study, we developed an electronic medical report delivery system from a medical imaging department to the mobile phones of the referring doctors. The system extracts a text summary of medical report and a screen capture of diagnostic medical image in JPEG format, which are transmitted to 3G GSM mobile phones.

Into the Epoch of Galaxy Formation

NASA Astrophysics Data System (ADS)

2000-02-01

Infrared VLT Observations Identify Hidden Galaxies in the Early Universe Working with the ESO Very Large Telescope (VLT) at the Paranal Observatory , a group of European astronomers [1] has just obtained one of the deepest looks into the distant Universe ever made by an optical telescope. These observations were carried out in the near-infrared spectral region and are part of an attempt to locate very distant galaxies that have so far escaped detection in the visual bands. The first results are very promising and some concentrations of galaxies at very large distances were uncovered. Some early galaxies may be in hiding Current theories hypothesize that more than 80% of all stars ever formed were assembled in galaxies during the latter half of the elapsed lifetime of the Universe, i.e., during the past 7-8 billion years. However, doubts have arisen about these ideas. There are now observational indications that a significant number of those galaxies that formed during the first 20% of the age of the Universe, i.e. within about 3 billion years after the Big Bang, may not be visible to optical telescopes. In some cases, we do not see them, because their light is obscured by dust. Other distant galaxies may escape detection by optical telescopes because star formation in them has ceased and their light is mainly emitted in the red and infrared spectral bands. This is because, while very young galaxies mostly contain hot and blue stars, older galaxies have substantial numbers of cool and red stars. They are then dominated by an older, "evolved" stellar population that is cooler and redder. The large cosmic velocities of these galaxies further enhance this effect by causing their light to be "redshifted" towards longer wavelengths, i.e. into the near-infrared spectral region. Observations in the infrared needed Within the present programme, long exposures in near-infrared wavebands were made with the Infrared Spectrometer And Array Camera (ISAAC) , mounted on ANTU , the first of the four 8.2-m VLT Unit Telescopes. A first analysis of the new observations indicates that "evolved" galaxies were already present when the Universe was only 4 billion years old. This information is of great importance to our understanding of how the matter in the early Universe condensed and the first galaxies and stars came into being. While in the nearby Universe evolved galaxies are preferentially located in denser environments such as groups and clusters of galaxies, little is currently known about the distribution in space of such objects at early cosmic epochs. In order to be able to see such obscured and/or "evolved" galaxies in the early Universe, and to look for hitherto unknown galaxies beyond the limits of "deep-field" imaging in visible spectral bands, it is necessary to employ other observing techniques. The astronomers must search for such objects on large-field, very long-exposure sky images obtained in the near-infrared (NIR, wavelength 1-2 µm) region of the electromagnetic spectrum and at even longer wavelengths (> 10 µm) in the far-IR and in the sub-mm range. Such observations are beyond the capability of the infrared cameras installed on the world's 4-m class telescopes. However, the advent of the ISAAC instrument at the 8.2-m ANTU telescope has now opened new and exciting research opportunities in this direction for European astronomers. With ISAAC , it is possible to obtain "deep" NIR images in an unprecedentedly wide field of view, covering a sky area about 7 times larger than with the best instruments previously available on very large telescopes. Such observations also benefit greatly from the very good optical quality provided by the active optics control of the VLT, as well as the excellent Paranal site. The ISAAC/ANTU observations ESO PR Photo 06a/00 ESO PR Photo 06a/00 [Preview - JPEG: 400 x 427pix - 69k] [Normal - JPEG: 800 x 853 pix - 195k] [Full-Res - JPEG: 942 x 1004 pix - 635k] Caption : ESO PR Photo 06a/00 displays a 4.5 arcmin 2 area of the "AXAF Deep Field" , as observed with the ISAAC multi-mode instrument at VLT ANTU in the near-IR K band (at wavelength 2.x µm). The total integration time is 8.5 hours and the limiting magnitude is K = 23.5 per arcsec 2 (at S/N-ratio = 3). The pixel size is 0.15 arcsec. North is up and east is left. The "Full-Res" version maintains the original pixels and is of the highest reproduction quality (least file compression). The reproduction is "negative", with dark objects on a light sky, in order to better show the faintest objects. See also the technical note below. ESO PR Photo 06b/00 ESO PR Photo 06b/00 [Preview - JPEG: 400 x 451 pix - 103k] [Normal - JPEG: 800 x 902 pix - 270k] [Full-Res - JPEG: 924 x 1042 pix - 704k] Caption : ESO PR Photo 06b/00 is a composite colour image of the field shown in PR Photo 06a/00 . It is a combination of the K-band image from ANTU/ISAAC shown in PR Photo 06a/00 with two images obtained in the B and R bands with the SUSI-2 optical imager at the New Technology Telescope (NTT) on La Silla in the framework of the ESO-EIS survey. Note the relatively high density of red galaxies, visible in the upper right part of this image. The colours of most of these galaxies are consistent with those of "evolved" galaxies, already present when the Universe was only 4 billions years old. The "Full-Res" version maintains the original pixels and is of the highest reproduction quality (least file compression). The group of European astronomers recently obtained a first "ultra-deep" 4.5 arcmin 2 image in the near-infrared J (wavelength 1.2 µm) and K (2.2 µm) bands, centered in the so-called "AXAF Deep Field", cf. PR Photos 06a-b/00 . This area of the sky is remarkably devoid of bright stars and provides a clear view towards the remote Universe, as there is little obscuring dust in our own Galaxy, the Milky Way, in this direction. It is therefore uniquely suited to probe the depth of the Universe. It is exactly for this reason that it was selected for a deep survey to be conducted with the Chandra X-Ray Observatory (CXO) during the guaranteed observing time of the former ESO Director General, Professor Riccardo Giacconi , and as a deep field of the ESO Imaging Survey (EIS, cf. ESO Press Photos 46a-j/99 ). The sky field observed with ISAAC and shown above is near the centre of the WFI image (ESO PR Photo 46a/99); it is displaced about 3.6 arcmin towards West and 1.0 armin towards North. As seen on the photos, there are great numbers of faint galaxies in this direction. Those of very red colour emit most of their light in the infrared spectral region and are particularly interesting since they may either be highly obscured or contain mostly old stars, as described above. New research possibilities With observations as these, ISAAC is now opening a new window towards the distant Universe. The comparison of the new NIR observations with earlier exposures at other wavelengths provides unique research opportunities. It is possible to measure the average star formation rate and the total stellar mass content in galaxies that are heavily obscured and are therefore not observable in the optical bands and which may constitute a substantial fraction of the primeval galaxy population. Such measurements will also allow to test current theories of galaxy formation that predict stars to be gradually assembled into galaxies, and hence envisage a progressive decline in the galaxy population towards very early cosmic times, in particular within 1-2 billion years after the Big Bang. Moreover, a comparison of NIR, optical and X-ray images will make it possible to gain new insights into the nuclear activity at the center of star-forming galaxies. It will become possible to study the distinct effects due to massive black holes and bursts of star formation. Concentrations of galaxies at large distances The relatively large field-of-view of ISAAC allows to gain information about the distribution in space of the faintest and most distant, evolved galaxies and also about the existence of associations of distant galaxies. A first clear example is the concentration of galaxies that appear uniformly yellow in PR Photo 06b/00 , apparently tracing a group of galaxies that was already assembled when the Universe was only 6 billion years old. A confirmation of the distance of a few of these galaxies has already been obtained by means of spectral observations in the framework of an ESO Large Programme , entitled "A Stringent Test on the Formation of Early Type and Massive Galaxies" and carried out by another group of astronomers [2]. A further clear example of a concentration of distant galaxies is seen in the upper right part of PR Photo 06b/00 . The very red colours of several galaxies in this sky area indicate that they are even more distant, "evolved" galaxies, already present when the Universe was only 1/3 of the current age. Notes [1] The European team consists of Emanuele Giallongo (Principal Investigator), Adriano Fontana , Nicola Menci and Francesco Poli (all at Rome Observatory), Stephane Arnouts and Sandro D'Odorico (European Southern Observatory, Garching), Stefano Cristiani (ST European Coordinating Facility, Garching) and Paolo Saracco (Milan Observatory). The data analysis was performed at the Milan ( P. Saracco ) and Rome ( A. Fontana , F. Poli ) Observatories. [2] This programme is conducted Andrea Cimatti (Principal Investigator) and Emanuele Daddi (both at Arcetri Observatory), Tom Broadhurst , Sandro D'Odorico , Roberto Gilmozzi and Alvio Renzini (European Southern Observatory), Stefano Cristiani (ST European Coordinating Facility, Garching), Adriano Fontana , Emanuele Giallongo , Nicola Menci and Francesco Poli (Rome Observatory), Marco Mignoli , Lucia Pozzetti and Giovanni Zamorani (Bologna Observatory) and Paolo Saracco (Milan Observatory). Technical note : The K-band image ( PR Photo 06a/00 ) is the result of 510 min of integration time with ISAAC at VLT ANTU. The 3-sigma magnitude limit is about K = 23.5 per arcsec 2. A J-band image was also obtained during 200 min of integration, with a 3-sigma limit of J = 25 per arcsec 2. The seeing FWHM (Full Width at Half Maximum) is 0.65 arcsec for both bands. The redshift, estimated on the basis of the measured colours of the mentioned over-density of yellow galaxies (cf. PR Photo 06b/00 ), is between 0.6 and 0.7 and that of the red galaxies is between 1 and 1.4. ESO PR Photos may be reproduced, if credit is given to the European Southern Observatory.

Recent Evolution of the CDS Services - SIMBAD, VizieR and Aladin

NASA Astrophysics Data System (ADS)

Genova, F.; Allen, M. G.; Bienayme, O.; Boch, T.; Bonnarel, F.; Cambresy, L.; Derriere, S.; Dubois, P.; Fernique, P.; Lesteven, S.; Loup, C.; Ochsenbein, F.; Schaaff, A.; Vollmer, B.; Wenger, M.; Louys, M.; Jasniewicz, G.; Davoust, E.

2005-12-01

The Centre de Donnees astronomiques de Strasbourg (CDS) maintains several widely used databases and services. Among significant recent evolutions: - a new version of SIMBAD (SIMBAD 4), based on the PostgreSQL database system, has been developed, to replace the current version which has been operational since 1990. It allows new query and sampling possibilities. For accessing SIMBAD from other applications, a full Web Service will be made available in addition to the client-server program which is presently used as name resolver by many services. - VizieR, which gives access to major surveys, observation logs and tables published in journals, is continuously updated in collaboration with journals and ground- and space-based observatories. The diversity of information in VizieR makes it an excellent test-bed for the Virtual Observatory, in particular for the definition of astronomy semantics and of query language, and the implementation of registries. - a major update of Aladin (Aladin V3 Multiview) was released in April 2005. It integrates in particular a multiview display, image resampling, blinking, access to real pixel values (not only 8 bits), compatibility with common image formats such as GIF, JPEG and PNG, scaling functions for better pixel contrasts, a 'Region of Interest Generator' which automatically builds small views around catalog objects, a cross-match function, the possibility to compute new catalog colums via algebraic expressions, extended script commands for batch mode use, and access to additional data such as SDSS. Aladin is routinely used as a portal to the Virtual Observatory. Many of the new functions have been prototyped in the frame of the European Astrophysical Virtual Observatory project, and other are tested for the VO-TECH project.

Development of ultrasound/endoscopy PACS (picture archiving and communication system) and investigation of compression method for cine images

NASA Astrophysics Data System (ADS)

Osada, Masakazu; Tsukui, Hideki

2002-09-01

ABSTRACT Picture Archiving and Communication System (PACS) is a system which connects imaging modalities, image archives, and image workstations to reduce film handling cost and improve hospital workflow. Handling diagnostic ultrasound and endoscopy images is challenging, because it produces large amount of data such as motion (cine) images of 30 frames per second, 640 x 480 in resolution, with 24-bit color. Also, it requires enough image quality for clinical review. We have developed PACS which is able to manage ultrasound and endoscopy cine images with above resolution and frame rate, and investigate suitable compression method and compression rate for clinical image review. Results show that clinicians require capability for frame-by-frame forward and backward review of cine images because they carefully look through motion images to find certain color patterns which may appear in one frame. In order to satisfy this quality, we have chosen motion JPEG, installed and confirmed that we could capture this specific pattern. As for acceptable image compression rate, we have performed subjective evaluation. No subjects could tell the difference between original non-compressed images and 1:10 lossy compressed JPEG images. One subject could tell the difference between original and 1:20 lossy compressed JPEG images although it is acceptable. Thus, ratios of 1:10 to 1:20 are acceptable to reduce data amount and cost while maintaining quality for clinical review.

Prior-Based Quantization Bin Matching for Cloud Storage of JPEG Images.

PubMed

Liu, Xianming; Cheung, Gene; Lin, Chia-Wen; Zhao, Debin; Gao, Wen

2018-07-01

Millions of user-generated images are uploaded to social media sites like Facebook daily, which translate to a large storage cost. However, there exists an asymmetry in upload and download data: only a fraction of the uploaded images are subsequently retrieved for viewing. In this paper, we propose a cloud storage system that reduces the storage cost of all uploaded JPEG photos, at the expense of a controlled increase in computation mainly during download of requested image subset. Specifically, the system first selectively re-encodes code blocks of uploaded JPEG images using coarser quantization parameters for smaller storage sizes. Then during download, the system exploits known signal priors-sparsity prior and graph-signal smoothness prior-for reverse mapping to recover original fine quantization bin indices, with either deterministic guarantee (lossless mode) or statistical guarantee (near-lossless mode). For fast reverse mapping, we use small dictionaries and sparse graphs that are tailored for specific clusters of similar blocks, which are classified via tree-structured vector quantizer. During image upload, cluster indices identifying the appropriate dictionaries and graphs for the re-quantized blocks are encoded as side information using a differential distributed source coding scheme to facilitate reverse mapping during image download. Experimental results show that our system can reap significant storage savings (up to 12.05%) at roughly the same image PSNR (within 0.18 dB).

A new approach of objective quality evaluation on JPEG2000 lossy-compressed lung cancer CT images

NASA Astrophysics Data System (ADS)

Cai, Weihua; Tan, Yongqiang; Zhang, Jianguo

2007-03-01

Image compression has been used to increase the communication efficiency and storage capacity. JPEG 2000 compression, based on the wavelet transformation, has its advantages comparing to other compression methods, such as ROI coding, error resilience, adaptive binary arithmetic coding and embedded bit-stream. However it is still difficult to find an objective method to evaluate the image quality of lossy-compressed medical images so far. In this paper, we present an approach to evaluate the image quality by using a computer aided diagnosis (CAD) system. We selected 77 cases of CT images, bearing benign and malignant lung nodules with confirmed pathology, from our clinical Picture Archiving and Communication System (PACS). We have developed a prototype of CAD system to classify these images into benign ones and malignant ones, the performance of which was evaluated by the receiver operator characteristics (ROC) curves. We first used JPEG 2000 to compress these cases of images with different compression ratio from lossless to lossy, and used the CAD system to classify the cases with different compressed ratio, then compared the ROC curves from the CAD classification results. Support vector machine (SVM) and neural networks (NN) were used to classify the malignancy of input nodules. In each approach, we found that the area under ROC (AUC) decreases with the increment of compression ratio with small fluctuations.

Edge-Based Image Compression with Homogeneous Diffusion

NASA Astrophysics Data System (ADS)

Mainberger, Markus; Weickert, Joachim

It is well-known that edges contain semantically important image information. In this paper we present a lossy compression method for cartoon-like images that exploits information at image edges. These edges are extracted with the Marr-Hildreth operator followed by hysteresis thresholding. Their locations are stored in a lossless way using JBIG. Moreover, we encode the grey or colour values at both sides of each edge by applying quantisation, subsampling and PAQ coding. In the decoding step, information outside these encoded data is recovered by solving the Laplace equation, i.e. we inpaint with the steady state of a homogeneous diffusion process. Our experiments show that the suggested method outperforms the widely-used JPEG standard and can even beat the advanced JPEG2000 standard for cartoon-like images.

A Powerful Twin Arrives

NASA Astrophysics Data System (ADS)

1999-11-01

First Images from FORS2 at VLT KUEYEN on Paranal The first, major astronomical instrument to be installed at the ESO Very Large Telescope (VLT) was FORS1 ( FO cal R educer and S pectrograph) in September 1998. Immediately after being attached to the Cassegrain focus of the first 8.2-m Unit Telescope, ANTU , it produced a series of spectacular images, cf. ESO PR 14/98. Many important observations have since been made with this outstanding facility. Now FORS2 , its powerful twin, has been installed at the second VLT Unit Telescope, KUEYEN . It is the fourth major instrument at the VLT after FORS1 , ISAAC and UVES.. The FORS2 Commissioning Team that is busy installing and testing this large and complex instrument reports that "First Light" was successfully achieved already on October 29, 1999, only two days after FORS2 was first mounted at the Cassegrain focus. Since then, various observation modes have been carefully tested, including normal and high-resolution imaging, echelle and multi-object spectroscopy, as well as fast photometry with millisecond time resolution. A number of fine images were obtained during this work, some of which are made available with the present Press Release. The FORS instruments ESO PR Photo 40a/99 ESO PR Photo 40a/99 [Preview - JPEG: 400 x 345 pix - 203k] [Normal - JPEG: 800 x 689 pix - 563kb] [Full-Res - JPEG: 1280 x 1103 pix - 666kb] Caption to PR Photo 40a/99: This digital photo shows the twin instruments, FORS2 at KUEYEN (in the foreground) and FORS1 at ANTU, seen in the background through the open ventilation doors in the two telescope enclosures. Although they look alike, the two instruments have specific functions, as described in the text. FORS1 and FORS2 are the products of one of the most thorough and advanced technological studies ever made of a ground-based astronomical instrument. They have been specifically designed to investigate the faintest and most remote objects in the universe. They are "multi-mode instruments" that may be used in several different observation modes. FORS2 is largely identical to FORS1 , but there are a number of important differences. For example, it contains a Mask Exchange Unit (MXU) for laser-cut star-plates [1] that may be inserted at the focus, allowing a large number of spectra of different objects, in practice up to about 70, to be taken simultaneously. Highly sophisticated software assigns slits to individual objects in an optimal way, ensuring a great degree of observing efficiency. Instead of the polarimetry optics found in FORS1 , FORS2 has new grisms that allow the use of higher spectral resolutions. The FORS project was carried out under ESO contract by a consortium of three German astronomical institutes, the Heidelberg State Observatory and the University Observatories of Göttingen and Munich. The participating institutes have invested a total of about 180 man-years of work in this unique programme. The photos below demonstrate some of the impressive possibilities with this new instrument. They are based on observations with the FORS2 standard resolution collimator (field size 6.8 x 6.8 armin = 2048 x 2048 pixels; 1 pixel = 0.20 arcsec). In addition, observations of the Crab pulsar demonstrate a new observing mode, high-speed photometry. Protostar HH-34 in Orion ESO PR Photo 40b/99 ESO PR Photo 40b/99 [Preview - JPEG: 400 x 444 pix - 220kb] [Normal - JPEG: 800 x 887 pix - 806kb] [Full-Res - JPEG: 2000 x 2217 pix - 3.6Mb] The Area around HH-34 in Orion ESO PR Photo 40c/99 ESO PR Photo 40c/99 [Preview - JPEG: 400 x 494 pix - 262kb] [Full-Res - JPEG: 802 x 991 pix - 760 kb] The HH-34 Superjet in Orion (centre) PR Photo 40b/99 shows a three-colour composite of the young object Herbig-Haro 34 (HH-34) , now in the protostar stage of evolution. It is based on CCD frames obtained with the FORS2 instrument in imaging mode, on November 2 and 6, 1999. This object has a remarkable, very complicated appearance that includes two opposite jets that ram into the surrounding interstellar matter. This structure is produced by a machine-gun-like blast of "bullets" of dense gas ejected from the star at high velocities (approaching 250 km/sec). This seems to indicate that the star experiences episodic "outbursts" when large chunks of material fall onto it from a surrounding disk. HH-34 is located at a distance of approx. 1,500 light-years, near the famous Orion Nebula , one of the most productive star birth regions. Note also the enigmatic "waterfall" to the upper left, a feature that is still unexplained. PR Photo 40c/99 is an enlargement of a smaller area around the central object. Technical information : Photo 40b/99 is based on a composite of three images taken through three different filters: B (wavelength 429 nm; Full-Width-Half-Maximum (FWHM) 88 nm; exposure time 10 min; here rendered as blue), H-alpha (centered on the hydrogen emission line at wavelength 656 nm; FWHM 6 nm; 30 min; green) and S II (centrered at the emission lines of inonized sulphur at wavelength 673 nm; FWHM 6 nm; 30 min; red) during a period of 0.8 arcsec seeing. The field shown measures 6.8 x 6.8 arcmin and the images were recorded in frames of 2048 x 2048 pixels, each measuring 0.2 arcsec. The Full Resolution version shows the original pixels. North is up; East is left. N 70 Nebula in the Large Magellanic Cloud ESO PR Photo 40d/99 ESO PR Photo 40d/99 [Preview - JPEG: 400 x 444 pix - 360kb] [Normal - JPEG: 800 x 887 pix - 1.0Mb] [Full-Res - JPEG: 1997 x 2213 pix - 3.4Mb] The N 70 Nebula in the LMC ESO PR Photo 40e/99 ESO PR Photo 40e/99 [Preview - JPEG: 400 x 485 pix - 346kb] [Full-Res - JPEG: 986 x 1196 pix - 1.2Mb] The N70 Nebula in the LMC (detail) PR Photo 40d/99 shows a three-colour composite of the N 70 nebula. It is a "Super Bubble" in the Large Magellanic Cloud (LMC) , a satellite galaxy to the Milky Way system, located in the southern sky at a distance of about 160,000 light-years. This photo is based on CCD frames obtained with the FORS2 instrument in imaging mode in the morning of November 5, 1999. N 70 is a luminous bubble of interstellar gas, measuring about 300 light-years in diameter. It was created by winds from hot, massive stars and supernova explosions and the interior is filled with tenuous, hot expanding gas. An object like N70 provides astronomers with an excellent opportunity to explore the connection between the lifecycles of stars and the evolution of galaxies. Very massive stars profoundly affect their environment. They stir and mix the interstellar clouds of gas and dust, and they leave their mark in the compositions and locations of future generations of stars and star systems. PR Photo 40e/99 is an enlargement of a smaller area of this nebula. Technical information : Photos 40d/99 is based on a composite of three images taken through three different filters: B (429 nm; FWHM 88 nm; 3 min; here rendered as blue), V (554 nm; FWHM 111 nm; 3 min; green) and H-alpha (656 nm; FWHM 6 nm; 3 min; red) during a period of 1.0 arcsec seeing. The field shown measures 6.8 x 6.8 arcmin and the images were recorded in frames of 2048 x 2048 pixels, each measuring 0.2 arcsec. The Full Resolution version shows the original pixels. North is up; East is left. The Crab Nebula in Taurus ESO PR Photo 40f/99 ESO PR Photo 40f/99 [Preview - JPEG: 400 x 446 pix - 262k] [Normal - JPEG: 800 x 892 pix - 839 kb] [Full-Res - JPEG: 2036 x 2269 pix - 3.6Mb] The Crab Nebula in Taurus ESO PR Photo 40g/99 ESO PR Photo 40g/99 [Preview - JPEG: 400 x 444 pix - 215kb] [Full-Res - JPEG: 817 x 907 pix - 485 kb] The Crab Nebula in Taurus (detail) PR Photo 40f/99 shows a three colour composite of the well-known Crab Nebula (also known as "Messier 1" ), as observed with the FORS2 instrument in imaging mode in the morning of November 10, 1999. It is the remnant of a supernova explosion at a distance of about 6,000 light-years, observed almost 1000 years ago, in the year 1054. It contains a neutron star near its center that spins 30 times per second around its axis (see below). PR Photo 40g/99 is an enlargement of a smaller area. More information on the Crab Nebula and its pulsar is available on the web, e.g. at a dedicated website for Messier objects. In this picture, the green light is predominantly produced by hydrogen emission from material ejected by the star that exploded. The blue light is predominantly emitted by very high-energy ("relativistic") electrons that spiral in a large-scale magnetic field (so-called syncrotron emission ). It is believed that these electrons are continuously accelerated and ejected by the rapidly spinning neutron star at the centre of the nebula and which is the remnant core of the exploded star. This pulsar has been identified with the lower/right of the two close stars near the geometric center of the nebula, immediately left of the small arc-like feature, best seen in PR Photo 40g/99 . Technical information : Photo 40f/99 is based on a composite of three images taken through three different optical filters: B (429 nm; FWHM 88 nm; 5 min; here rendered as blue), R (657 nm; FWHM 150 nm; 1 min; green) and S II (673 nm; FWHM 6 nm; 5 min; red) during periods of 0.65 arcsec (R, S II) and 0.80 (B) seeing, respectively. The field shown measures 6.8 x 6.8 arcmin and the images were recorded in frames of 2048 x 2048 pixels, each measuring 0.2 arcsec. The Full Resolution version shows the original pixels. North is up; East is left. The High Time Resolution mode (HIT) of FORS2 ESO PR Photo 40h/99 ESO PR Photo 40h/99 [Preview - JPEG: 400 x 304 pix - 90kb] [Normal - JPEG: 707 x 538 pix - 217kb] Time Sequence of the Pulsar in the Crab Nebula ESO PR Photo 40i/99 ESO PR Photo 40i/99 [Preview - JPEG: 400 x 324 pix - 42kb] [Normal - JPEG: 800 x 647 pix - 87kb] Lightcurve of the Pulsar in the Crab Nebula In combination with the large light collecting power of the VLT Unit Telescopes, the high time resolution (25 nsec = 0.000000025 sec) of the ESO-developed FIERA CCD-detector controller opens a new observing window for celestial objects that undergo light intensity variations on very short time scales. A first implementation of this type of observing mode was tested with FORS2 during the first commissioning phase, by means of one of the most fascinating astronomical objects, the rapidly spinning neutron star in the Crab Nebula . It is also known as the Crab pulsar and is an exceedingly dense object that represents an extreme state of matter - it weighs as much as the Sun, but measures only about 30 km across. The result presented here was obtained in the so-called trailing mode , during which one of the rectangular openings of the Multi-Object Spectroscopy (MOS) assembly within FORS2 is placed in front of the lower end of the field. In this way, the entire surface of the CCD is covered, except the opening in which the object under investigation is positioned. By rotating this opening, some neighbouring objects (e.g. stars for alignment) may be observed simultaneously. As soon as the shutter is opened, the charges on the chip are progressively shifted upwards, one pixel at a time, until those first collected in the bottom row behind the opening have reached the top row. Then the entire CCD is read out and the digital data with the full image is stored in the computer. In this way, successive images (or spectra) of the object are recorded in the same frame, displaying the intensity variation with time during the exposure. For this observation, the total exposure lasted 2.5 seconds. During this time interval the image of the pulsar (and those of some neighbouring stars) were shifted 2048 times over the 2048 rows of the CCD. Each individual exposure therefore lasted exactly 1.2 msec (0.0012 sec), corresponding to a nominal time-resolution of 2.4 msec (2 pixels). Faster or slower time resolutions are possible by increasing or decreasing the shift and read-out rate [2]. In ESO PR Photo 40h/99 , the continuous lines in the top and bottom half are produced by normal stars of constant brightness, while the series of dots represents the individual pulses of the Crab pulsar, one every 33 milliseconds (i.e. the neutron star rotates around its axis 30 times per second). It is also obvious that these dots are alternatively brighter and fainter: they mirror the double-peaked profile of the light pulses, as shown in ESO PR Photo 40i/99 . In this diagramme, the time increases along the abscissa axis (1 pixel = 1.2 msec) and the momentary intensity (uncalibrated) is along the ordinate axis. One full revolution of the neutron star corresponds to the distance from one high peak to the next, and the diagramme therefore covers six consecutive revolutions (about 200 milliseconds). Following thorough testing, this new observing mode will allow to investigate the brightness variations of this and many other objects in great detail in order to gain new and fundamental insights in the physical mechanisms that produce the radiation pulses. In addition, it is foreseen to do high time resolution spectroscopy of rapidly varying phenomena. Pushing it to the limits with an 8.2-m telescope like KUEYEN will be a real challenge to the observers that will most certainly lead to great and exciting research projects in various fields of modern astrophysics. Technical information : The frame shown in Photo 40h/99 was obtained during a total exposure time of 2.5 sec without any optical filtre. During this time, the charges on the CCD were shifted over 2048 rows; each row was therefore exposed during 1.2 msec. The bright continuous line comes from the star next to the pulsar; the orientation was such that the "observation slit" was placed over two neighbouring stars. Preliminary data reduction: 11 pixels were added across the pulsar image to increase the signal-to-noise ratio and the background light from the Crab Nebula was subtracted for the same reason. Division by a brighter star (also background-subtracted, but not shown in the image) helped to reduce the influence of the Earth's atmosphere. Notes [1] The masks are produced by the Mask Manufacturing Unit (MMU) built by the VIRMOS Consortium for the VIMOS and NIRMOS instruments that will be installed at the VLT MELIPAL and YEPUN telescopes, respectively. [2] The time resolution achieved during the present test was limited by the maximum charge transfer rate of this particular CCD chip; in the future, FORS2 may be equipped with a new chip with a rate that is up to 20 times faster. How to obtain ESO Press Information ESO Press Information is made available on the World-Wide Web (URL: http://www.eso.org../ ). ESO Press Photos may be reproduced, if credit is given to the European Southern Observatory.

The President and the Galaxy

NASA Astrophysics Data System (ADS)

2004-12-01

On December 9-10, 2004, the ESO Paranal Observatory was honoured with an overnight visit by His Excellency the President of the Republic of Chile, Ricardo Lagos and his wife, Mrs. Luisa Duran de Lagos. The high guests were welcomed by the ESO Director General, Dr. Catherine Cesarsky, ESO's representative in Chile, Mr. Daniel Hofstadt, and Prof. Maria Teresa Ruiz, Head of the Astronomy Department at the Universidad de Chile, as well as numerous ESO staff members working at the VLT site. The visit was characterised as private, and the President spent a considerable time in pleasant company with the Paranal staff, talking with and getting explanations from everybody. The distinguished visitors were shown the various high-tech installations at the observatory, including the Interferometric Tunnel with the VLTI delay lines and the first Auxiliary Telescope. Explanations were given by ESO astronomers and engineers and the President, a keen amateur astronomer, gained a good impression of the wide range of exciting research programmes that are carried out with the VLT. President Lagos showed a deep interest and impressed everyone present with many, highly relevant questions. Having enjoyed the spectacular sunset over the Pacific Ocean from the Residence terrace, the President met informally with the Paranal employees who had gathered for this unique occasion. Later, President Lagos visited the VLT Control Room from where the four 8.2-m Unit Telescopes and the VLT Interferometer (VLTI) are operated. Here, the President took part in an observing sequence of the spiral galaxy NGC 1097 (see PR Photo 35d/04) from the console of the MELIPAL telescope. After one more visit to the telescope platform at the top of Paranal, the President and his wife left the Observatory in the morning of December 10, 2004, flying back to Santiago. ESO PR Photo 35e/04 ESO PR Photo 35e/04 President Lagos Meets with ESO Staff at the Paranal Residencia [Preview - JPEG: 400 x 267pix - 144k] [Normal - JPEG: 640 x 427 pix - 240k] ESO PR Photo 35f/04 ESO PR Photo 35f/04 The Presidential Couple with Professor Maria Teresa Ruiz and the ESO Director General [Preview - JPEG: 500 x 400 pix - 224k] [Normal - JPEG: 1000 x 800 pix - 656k] [FullRes - JPEG: 1575 x 1260 pix - 1.0M] ESO PR Photo 35g/04 ESO PR Photo 35g/04 President Lagos with ESO Staff [Preview - JPEG: 500 x 400 pix - 192k] [Normal - JPEG: 1000 x 800 pix - 592k] [FullRes - JPEG: 1575 x 1200 pix - 1.1M] Captions: ESO PR Photo 35e/04 was obtained during President Lagos' meeting with ESO Staff at the Paranal Residencia. On ESO PR Photo 35f/04, President Lagos and Mrs. Luisa Duran de Lagos are seen at a quiet moment during the visit to the VLT Control Room, together with Prof. Maria Teresa Ruiz (far right), Head of the Astronomy Department at the Universidad de Chile, and the ESO Director General. ESO PR Photo 35g/04 shows President Lagos with some ESO staff members in the Paranal Residencia. VLT obtains a splendid photo of a unique galaxy, NGC 1097 ESO PR Photo 35d/04 ESO PR Photo 35d/04 Spiral Galaxy NGC 1097 (Melipal + VIMOS) [Preview - JPEG: 400 x 525 pix - 181k] [Normal - JPEG: 800 x 1049 pix - 757k] [FullRes - JPEG: 2296 x 3012 pix - 7.9M] Captions: ESO PR Photo 35d/04 is an almost-true colour composite based on three images made with the multi-mode VIMOS instrument on the 8.2-m Melipal (Unit Telescope 3) of ESO's Very Large Telescope. They were taken on the night of December 9-10, 2004, in the presence of the President of the Republic of Chile, Ricardo Lagos. Details are available in the Technical Note below. A unique and very beautiful image was obtained with the VIMOS instrument with President Lagos at the control desk. Located at a distance of about 45 million light-years in the southern constellation Fornax (the Furnace), NGC 1097 is a relatively bright, barred spiral galaxy of type SBb, seen face-on. At magnitude 9.5, and thus just 25 times fainter than the faintest object that can be seen with the unaided eye, it appears in small telescopes as a bright, circular disc. ESO PR Photo 35d/04, taken on the night of December 9 to 10, 2004 with the VIsible Multi-Object Spectrograph ("VIMOS), a four-channel multiobject spectrograph and imager attached to the 8.2-m VLT Melipal telescope, shows that the real structure is much more complicated. NGC 1097 is indeed a most interesting object in many respects. As this striking image reveals, NGC 1097 presents a centre that consists of a broken ring of bright knots surrounding the galaxy's nucleus. The sizes of these knots - presumably gigantic bubbles of hydrogen atoms having lost one electron (HII regions) through the intense radiation from luminous massive stars - range from roughly 750 to 2000 light-years. The presence of these knots suggests that an energetic burst of star formation has recently occurred. NGC 1097 is also known as an example of the so-called LINER (Low-Ionization Nuclear Emission Region Galaxies) class. Objects of this type are believed to be low-luminosity examples of Active Galactic Nuclei (AGN), whose emission is thought to arise from matter (gas and stars) falling into oblivion in a central black hole. There is indeed much evidence that a supermassive black hole is located at the very centre of NGC 1097, with a mass of several tens of million times the mass of the Sun. This is at least ten times more massive than the central black hole in our own Milky Way. However, NGC 1097 possesses a comparatively faint nucleus only, and the black hole in its centre must be on a very strict "diet": only a small amount of gas and stars is apparently being swallowed by the black hole at any given moment. A turbulent past As can be clearly seen in the upper part of PR Photo 35d/04, NGC 1097 also has a small galaxy companion; it is designated NGC 1097A and is located about 42,000 light-years away from the centre of NGC 1097. This peculiar elliptical galaxy is 25 times fainter than its big brother and has a "box-like" shape, not unlike NGC 6771, the smallest of the three galaxies that make up the famous Devil's Mask, cf. ESO PR Photo 12/04. There is evidence that NGC 1097 and NGC 1097A have been interacting in the recent past. Another piece of evidence for this galaxy's tumultuous past is the presence of four jets - not visible on this image - discovered in the 1970's on photographic plates. These jets are now believed to be the captured remains of a disrupted dwarf galaxy that passed through the inner part of the disc of NGC 1097. Moreover, another interesting feature of this active galaxy is the fact that no less than two supernovae were detected inside it within a time span of only four years. SN 1999eu was discovered by Japanese amateur Masakatsu Aoki (Toyama, Japan) on November 5, 1999. This 17th-magnitude supernova was a peculiar Type II supernova, the end result of the core collapse of a very massive star. And in the night of January 5 to 6, 2003, Reverend Robert Evans (Australia) discovered another Type II supernova of 15th magnitude. Also visible in this very nice image which was taken during very good sky conditions - the seeing was well below 1 arcsec - are a multitude of background galaxies of different colours and shapes. Given the fact that the total exposure time for this three-colour image was just 11 min, it is a remarkable feat, demonstrating once again the very high efficiency of the VLT.

Informatics in radiology (infoRAD): free DICOM image viewing and processing software for the Macintosh computer: what's available and what it can do for you.

PubMed

Escott, Edward J; Rubinstein, David

2004-01-01

It is often necessary for radiologists to use digital images in presentations and conferences. Most imaging modalities produce images in the Digital Imaging and Communications in Medicine (DICOM) format. The image files tend to be large and thus cannot be directly imported into most presentation software, such as Microsoft PowerPoint; the large files also consume storage space. There are many free programs that allow viewing and processing of these files on a personal computer, including conversion to more common file formats such as the Joint Photographic Experts Group (JPEG) format. Free DICOM image viewing and processing software for computers running on the Microsoft Windows operating system has already been evaluated. However, many people use the Macintosh (Apple Computer) platform, and a number of programs are available for these users. The World Wide Web was searched for free DICOM image viewing or processing software that was designed for the Macintosh platform or is written in Java and is therefore platform independent. The features of these programs and their usability were evaluated. There are many free programs for the Macintosh platform that enable viewing and processing of DICOM images. (c) RSNA, 2004.

Another Look at an Enigmatic New World

NASA Astrophysics Data System (ADS)

2005-02-01

VLT NACO Performs Outstanding Observations of Titan's Atmosphere and Surface On January 14, 2005, the ESA Huygens probe arrived at Saturn's largest satellite, Titan. After a faultless descent through the dense atmosphere, it touched down on the icy surface of this strange world from where it continued to transmit precious data back to the Earth. Several of the world's large ground-based telescopes were also active during this exciting event, observing Titan before and near the Huygens encounter, within the framework of a dedicated campaign coordinated by the members of the Huygens Project Scientist Team. Indeed, large astronomical telescopes with state-of-the art adaptive optics systems allow scientists to image Titan's disc in quite some detail. Moreover, ground-based observations are not restricted to the limited period of the fly-by of Cassini and landing of Huygens. They hence complement ideally the data gathered by this NASA/ESA mission, further optimising the overall scientific return. A group of astronomers [1] observed Titan with ESO's Very Large Telescope (VLT) at the Paranal Observatory (Chile) during the nights from 14 to 16 January, by means of the adaptive optics NAOS/CONICA instrument mounted on the 8.2-m Yepun telescope [2]. The observations were carried out in several modes, resulting in a series of fine images and detailed spectra of this mysterious moon. They complement earlier VLT observations of Titan, cf. ESO Press Photos 08/04 and ESO Press Release 09/04. The highest contrast images ESO PR Photo 04a/05 ESO PR Photo 04a/05 Titan's surface (NACO/VLT) [Preview - JPEG: 400 x 712 pix - 64k] [Normal - JPEG: 800 x 1424 pix - 524k] ESO PR Photo 04b/05 ESO PR Photo 04b/05 Map of Titan's Surface (NACO/VLT) [Preview - JPEG: 400 x 651 pix - 41k] [Normal - JPEG: 800 x 1301 pix - 432k] Caption: ESO PR Photo 04a/05 shows Titan's trailing hemisphere [3] with the Huygens landing site marked as an "X". The left image was taken with NACO and a narrow-band filter centred at 2 microns. On the right is the NACO/SDI image of the same location showing Titan's surface through the 1.6 micron methane window. A spherical projection with coordinates on Titan is overplotted. ESO PR Photo 04b/05 is a map of Titan taken with NACO at 1.28 micron (a methane window allowing it to probe down to the surface). On the leading side of Titan, the bright equatorial feature ("Xanadu") is dominating. On the trailing side, the landing site of the Huygens probe is indicated. ESO PR Photo 04c/05 ESO PR Photo 04c/05 Titan, the Enigmatic Moon, and Huygens Landing Site (NACO-SDI/VLT and Cassini/ISS) [Preview - JPEG: 400 x 589 pix - 40k] [Normal - JPEG: 800 x 1178 pix - 290k] Caption: ESO PR Photo 04c/05 is a comparison between the NACO/SDI image and an image taken by Cassini/ISS while approaching Titan. The Cassini image shows the Huygens landing site map wrapped around Titan, rotated to the same position as the January NACO SDI observations. The yellow "X" marks the landing site of the ESA Huygens probe. The Cassini/ISS image is courtesy of NASA, JPL, Space Science Institute (see http://sci.esa.int/science-e/www/object/index.cfm?fobjectid=36222). The coloured lines delineate the regions that were imaged by Cassini at differing resolutions. The lower-resolution imaging sequences are outlined in blue. Other areas have been specifically targeted for moderate and high resolution mosaicking of surface features. These include the site where the European Space Agency's Huygens probe has touched down in mid-January (marked with the yellow X), part of the bright region named Xanadu (easternmost extent of the area covered), and a boundary between dark and bright regions. ESO PR Photo 04d/05 ESO PR Photo 04d/05 Evolution of the Atmosphere of Titan (NACO/VLT) [Preview - JPEG: 400 x 902 pix - 40k] [Normal - JPEG: 800 x 1804 pix - 320k] Caption: ESO PR Photo 04d/05 is an image of Titan's atmosphere at 2.12 microns as observed with NACO on the VLT at three different epochs from 2002 till now. Titan's atmosphere exhibits seasonal and meteorological changes which can clearly be seen here : the North-South asymmetry - indicative of changes in the chemical composition in one pole or the other, depending on the season - is now clearly in favour of the North pole. Indeed, the situation has reversed with respect to a few years ago when the South pole was brighter. Also visible in these images is a bright feature in the South pole, found to be presently dimming after having appeared very bright from 2000 to 2003. The differences in size are due to the variation in the distance to Earth of Saturn and its planetary system. The new images show Titan's atmosphere and surface at various near-infrared spectral bands. The surface of Titan's trailing side is visible in images taken through narrow-band filters at wavelengths 1.28, 1.6 and 2.0 microns. They correspond to the so-called "methane windows" which allow to peer all the way through the lower Titan atmosphere to the surface. On the other hand, Titan's atmosphere is visible through filters centred in the wings of these methane bands, e.g. at 2.12 and 2.17 microns. Eric Gendron of the Paris Observatory in France and leader of the team, is extremely pleased: "We believe that some of these images are the highest-contrast images of Titan ever taken with any ground-based or earth-orbiting telescope." The excellent images of Titan's surface show the location of the Huygens landing site in much detail. In particular, those centred at wavelength 1.6 micron and obtained with the Simultaneous Differential Imager (SDI) on NACO [4] provide the highest contrast and best views. This is firstly because the filters match the 1.6 micron methane window most accurately. Secondly, it is possible to get an even clearer view of the surface by subtracting accurately the simultaneously recorded images of the atmospheric haze, taken at wavelength 1.625 micron. The images show the great complexity of Titan's trailing side, which was earlier thought to be very dark. However, it is now obvious that bright and dark regions cover the field of these images. The best resolution achieved on the surface features is about 0.039 arcsec, corresponding to 200 km on Titan. ESO PR Photo 04c/04 illustrates the striking agreement between the NACO/SDI image taken with the VLT from the ground and the ISS/Cassini map. The images of Titan's atmosphere at 2.12 microns show a still-bright south pole with an additional atmospheric bright feature, which may be clouds or some other meteorological phenomena. The astronomers have followed it since 2002 with NACO and notice that it seems to be fading with time. At 2.17 microns, this feature is not visible and the north-south asymmetry - also known as "Titan's smile" - is clearly in favour in the north. The two filters probe different altitude levels and the images thus provide information about the extent and evolution of the north-south asymmetry. Probing the composition of the surface ESO PR Photo 04e/05 ESO PR Photo 04e/05 Spectrum of Two Regions on Titan (NACO/VLT) [Preview - JPEG: 400 x 623 pix - 44k] [Normal - JPEG: 800 x 1246 pix - 283k] Caption: ESO PR Photo 04e/05 represents two of the many spectra obtained on January 16, 2005 with NACO and covering the 2.02 to 2.53 micron range. The blue spectrum corresponds to the brightest region on Titan's surface within the slit, while the red spectrum corresponds to the dark area around the Huygens landing site. In the methane band, the two spectra are equal, indicating a similar atmospheric content; in the methane window centred at 2.0 microns, the spectra show differences in brightness, but are in phase. This suggests that there is no real variation in the composition beyond different atmospheric mixings. ESO PR Photo 04f/05 ESO PR Photo 04f/05 Imaging Titan with a Tunable Filter (NACO Fabry-Perot/VLT) [Preview - JPEG: 400 x 718 pix - 44k] [Normal - JPEG: 800 x 1435 pix - 326k] Caption: ESO PR Photo 04f/05 presents a series of images of Titan taken around the 2.0 micron methane window probing different layers of the atmosphere and the surface. The images are currently under thorough processing and analysis so as to reveal any subtle variations in wavelength that could be indicative of the spectral response of the various surface components, thus allowing the astronomers to identify them. Because the astronomers have also obtained spectroscopic data at different wavelengths, they will be able to recover useful information on the surface composition. The Cassini/VIMS instrument explores Titan's surface in the infrared range and, being so close to this moon, it obtains spectra with a much better spatial resolution than what is possible with Earth-based telescopes. However, with NACO at the VLT, the astronomers have the advantage of observing Titan with considerably higher spectral resolution, and thus to gain more detailed spectral information about the composition, etc. The observations therefore complement each other. Once the composition of the surface at the location of the Huygens landing is known from the detailed analysis of the in-situ measurements, it should become possible to learn the nature of the surface features elsewhere on Titan by combining the Huygens results with more extended cartography from Cassini as well as from VLT observations to come. More information Results on Titan obtained with data from NACO/VLT are in press in the journal Icarus ("Maps of Titan's surface from 1 to 2.5 micron" by A. Coustenis et al.). Previous images of Titan obtained with NACO and with NACO/SDI are accessible as ESO PR Photos 08/04 and ESO PR Photos 11/04. See also these Press Releases for additional scientific references.

Method for measuring anterior chamber volume by image analysis

NASA Astrophysics Data System (ADS)

Zhai, Gaoshou; Zhang, Junhong; Wang, Ruichang; Wang, Bingsong; Wang, Ningli

2007-12-01

Anterior chamber volume (ACV) is very important for an oculist to make rational pathological diagnosis as to patients who have some optic diseases such as glaucoma and etc., yet it is always difficult to be measured accurately. In this paper, a method is devised to measure anterior chamber volumes based on JPEG-formatted image files that have been transformed from medical images using the anterior-chamber optical coherence tomographer (AC-OCT) and corresponding image-processing software. The corresponding algorithms for image analysis and ACV calculation are implemented in VC++ and a series of anterior chamber images of typical patients are analyzed, while anterior chamber volumes are calculated and are verified that they are in accord with clinical observation. It shows that the measurement method is effective and feasible and it has potential to improve accuracy of ACV calculation. Meanwhile, some measures should be taken to simplify the handcraft preprocess working as to images.

HUBBLE SHOWS EXPANSION OF ETA CARINAE DEBRIS

NASA Technical Reports Server (NTRS)

2002-01-01

The furious expansion of a huge, billowing pair of gas and dust clouds are captured in this NASA Hubble Space Telescope comparison image of the supermassive star Eta Carinae. To create the picture, astronomers aligned and subtracted two images of Eta Carinae taken 17 months apart (April 1994, September 1995). Black represents where the material was located in the older image, and white represents the more recent location. (The light and dark streaks that make an 'X' pattern are instrumental artifacts caused by the extreme brightness of the central star. The bright white region at the center of the image results from the star and its immediate surroundings being 'saturated' in one of the images.)Photo Credit: Jon Morse (University of Colorado), Kris Davidson (University of Minnesota), and NASA Image files in GIF and JPEG format and captions may be accessed on Internet via anonymous ftp from oposite.stsci.edu in /pubinfo.

A study on multiresolution lossless video coding using inter/intra frame adaptive prediction

NASA Astrophysics Data System (ADS)

Nakachi, Takayuki; Sawabe, Tomoko; Fujii, Tetsuro

2003-06-01

Lossless video coding is required in the fields of archiving and editing digital cinema or digital broadcasting contents. This paper combines a discrete wavelet transform and adaptive inter/intra-frame prediction in the wavelet transform domain to create multiresolution lossless video coding. The multiresolution structure offered by the wavelet transform facilitates interchange among several video source formats such as Super High Definition (SHD) images, HDTV, SDTV, and mobile applications. Adaptive inter/intra-frame prediction is an extension of JPEG-LS, a state-of-the-art lossless still image compression standard. Based on the image statistics of the wavelet transform domains in successive frames, inter/intra frame adaptive prediction is applied to the appropriate wavelet transform domain. This adaptation offers superior compression performance. This is achieved with low computational cost and no increase in additional information. Experiments on digital cinema test sequences confirm the effectiveness of the proposed algorithm.

New Mexico: Los Alamos

Atmospheric Science Data Center

2014-05-15

article title:  Los Alamos, New Mexico     View Larger JPEG image ... kb) Multi-angle views of the Fire in Los Alamos, New Mexico, May 9, 2000. These true-color images covering north-central New Mexico ...

An RBF-based compression method for image-based relighting.

PubMed

Leung, Chi-Sing; Wong, Tien-Tsin; Lam, Ping-Man; Choy, Kwok-Hung

2006-04-01

In image-based relighting, a pixel is associated with a number of sampled radiance values. This paper presents a two-level compression method. In the first level, the plenoptic property of a pixel is approximated by a spherical radial basis function (SRBF) network. That means that the spherical plenoptic function of each pixel is represented by a number of SRBF weights. In the second level, we apply a wavelet-based method to compress these SRBF weights. To reduce the visual artifact due to quantization noise, we develop a constrained method for estimating the SRBF weights. Our proposed approach is superior to JPEG, JPEG2000, and MPEG. Compared with the spherical harmonics approach, our approach has a lower complexity, while the visual quality is comparable. The real-time rendering method for our SRBF representation is also discussed.

Lossless medical image compression using geometry-adaptive partitioning and least square-based prediction.

PubMed

Song, Xiaoying; Huang, Qijun; Chang, Sheng; He, Jin; Wang, Hao

2018-06-01

To improve the compression rates for lossless compression of medical images, an efficient algorithm, based on irregular segmentation and region-based prediction, is proposed in this paper. Considering that the first step of a region-based compression algorithm is segmentation, this paper proposes a hybrid method by combining geometry-adaptive partitioning and quadtree partitioning to achieve adaptive irregular segmentation for medical images. Then, least square (LS)-based predictors are adaptively designed for each region (regular subblock or irregular subregion). The proposed adaptive algorithm not only exploits spatial correlation between pixels but it utilizes local structure similarity, resulting in efficient compression performance. Experimental results show that the average compression performance of the proposed algorithm is 10.48, 4.86, 3.58, and 0.10% better than that of JPEG 2000, CALIC, EDP, and JPEG-LS, respectively. Graphical abstract ᅟ.

JPEG XS, a new standard for visually lossless low-latency lightweight image compression

NASA Astrophysics Data System (ADS)

Descampe, Antonin; Keinert, Joachim; Richter, Thomas; Fößel, Siegfried; Rouvroy, Gaël.

2017-09-01

JPEG XS is an upcoming standard from the JPEG Committee (formally known as ISO/IEC SC29 WG1). It aims to provide an interoperable visually lossless low-latency lightweight codec for a wide range of applications including mezzanine compression in broadcast and Pro-AV markets. This requires optimal support of a wide range of implementation technologies such as FPGAs, CPUs and GPUs. Targeted use cases are professional video links, IP transport, Ethernet transport, real-time video storage, video memory buffers, and omnidirectional video capture and rendering. In addition to the evaluation of the visual transparency of the selected technologies, a detailed analysis of the hardware and software complexity as well as the latency has been done to make sure that the new codec meets the requirements of the above-mentioned use cases. In particular, the end-to-end latency has been constrained to a maximum of 32 lines. Concerning the hardware complexity, neither encoder nor decoder should require more than 50% of an FPGA similar to Xilinx Artix 7 or 25% of an FPGA similar to Altera Cyclon 5. This process resulted in a coding scheme made of an optional color transform, a wavelet transform, the entropy coding of the highest magnitude level of groups of coefficients, and the raw inclusion of the truncated wavelet coefficients. This paper presents the details and status of the standardization process, a technical description of the future standard, and the latest performance evaluation results.

Parallel efficient rate control methods for JPEG 2000

NASA Astrophysics Data System (ADS)

Martínez-del-Amor, Miguel Á.; Bruns, Volker; Sparenberg, Heiko

2017-09-01

Since the introduction of JPEG 2000, several rate control methods have been proposed. Among them, post-compression rate-distortion optimization (PCRD-Opt) is the most widely used, and the one recommended by the standard. The approach followed by this method is to first compress the entire image split in code blocks, and subsequently, optimally truncate the set of generated bit streams according to the maximum target bit rate constraint. The literature proposes various strategies on how to estimate ahead of time where a block will get truncated in order to stop the execution prematurely and save time. However, none of them have been defined bearing in mind a parallel implementation. Today, multi-core and many-core architectures are becoming popular for JPEG 2000 codecs implementations. Therefore, in this paper, we analyze how some techniques for efficient rate control can be deployed in GPUs. In order to do that, the design of our GPU-based codec is extended, allowing stopping the process at a given point. This extension also harnesses a higher level of parallelism on the GPU, leading to up to 40% of speedup with 4K test material on a Titan X. In a second step, three selected rate control methods are adapted and implemented in our parallel encoder. A comparison is then carried out, and used to select the best candidate to be deployed in a GPU encoder, which gave an extra 40% of speedup in those situations where it was really employed.

Quality Scalability Aware Watermarking for Visual Content.

PubMed

Bhowmik, Deepayan; Abhayaratne, Charith

2016-11-01

Scalable coding-based content adaptation poses serious challenges to traditional watermarking algorithms, which do not consider the scalable coding structure and hence cannot guarantee correct watermark extraction in media consumption chain. In this paper, we propose a novel concept of scalable blind watermarking that ensures more robust watermark extraction at various compression ratios while not effecting the visual quality of host media. The proposed algorithm generates scalable and robust watermarked image code-stream that allows the user to constrain embedding distortion for target content adaptations. The watermarked image code-stream consists of hierarchically nested joint distortion-robustness coding atoms. The code-stream is generated by proposing a new wavelet domain blind watermarking algorithm guided by a quantization based binary tree. The code-stream can be truncated at any distortion-robustness atom to generate the watermarked image with the desired distortion-robustness requirements. A blind extractor is capable of extracting watermark data from the watermarked images. The algorithm is further extended to incorporate a bit-plane discarding-based quantization model used in scalable coding-based content adaptation, e.g., JPEG2000. This improves the robustness against quality scalability of JPEG2000 compression. The simulation results verify the feasibility of the proposed concept, its applications, and its improved robustness against quality scalable content adaptation. Our proposed algorithm also outperforms existing methods showing 35% improvement. In terms of robustness to quality scalable video content adaptation using Motion JPEG2000 and wavelet-based scalable video coding, the proposed method shows major improvement for video watermarking.

Image enhancement using the hypothesis selection filter: theory and application to JPEG decoding.

PubMed

Wong, Tak-Shing; Bouman, Charles A; Pollak, Ilya

2013-03-01

We introduce the hypothesis selection filter (HSF) as a new approach for image quality enhancement. We assume that a set of filters has been selected a priori to improve the quality of a distorted image containing regions with different characteristics. At each pixel, HSF uses a locally computed feature vector to predict the relative performance of the filters in estimating the corresponding pixel intensity in the original undistorted image. The prediction result then determines the proportion of each filter used to obtain the final processed output. In this way, the HSF serves as a framework for combining the outputs of a number of different user selected filters, each best suited for a different region of an image. We formulate our scheme in a probabilistic framework where the HSF output is obtained as the Bayesian minimum mean square error estimate of the original image. Maximum likelihood estimates of the model parameters are determined from an offline fully unsupervised training procedure that is derived from the expectation-maximization algorithm. To illustrate how to apply the HSF and to demonstrate its potential, we apply our scheme as a post-processing step to improve the decoding quality of JPEG-encoded document images. The scheme consistently improves the quality of the decoded image over a variety of image content with different characteristics. We show that our scheme results in quantitative improvements over several other state-of-the-art JPEG decoding methods.

"First Light" for HARPS at La Silla

NASA Astrophysics Data System (ADS)

2003-03-01

"First Light" for HARPS at La Silla Advanced Planet-Hunting Spectrograph Passes First Tests With Flying Colours Summary The initial commissioning period of the new HARPS spectrograph (High Accuracy Radial Velocity Planet Searcher) of the 3.6-m telescope at the ESO La Silla Observatory has been successfully accomplished in the period February 11 - 27, 2003. This new instrument is optimized to detect planets in orbit around other stars ("exoplanets") by means of accurate (radial) velocity measurements with an unequalled precision of 1 meter per second . This high sensitivity makes it possible to detect variations in the motion of a star at this level, caused by the gravitational pull of one or more orbiting planets, even relatively small ones. "First Light" occurred on February 11, 2003, during the first night of tests. The instrument worked flawlessly and was fine-tuned during subsequent nights, achieving the predicted performance already during this first test run. The measurement of accurate stellar radial velocities is a very efficient way to search for planets around other stars. More than one hundred extrasolar planets have so far been detected , providing an increasingly clear picture of a great diversity of exoplanetary systems . However, current technical limitations have so far prevented the discovery around solar-type stars of exoplanets that are much less massive than Saturn, the second-largest planet in the solar system. HARPS will break through this barrier and will carry this fundamental exploration towards detection of exoplanets with masses like Uranus and Neptune. Moreover, in the case of low-mass stars - like Proxima Centauri, cf. ESO PR 05/03 - HARPS will have the unique capability to detect big "telluric" planets with only a few times the mass of the Earth . The HARPS instrument is being offered to the research community in the ESO member countries, already from October 2003 . PR Photo 08a/03 : The large optical grating of the HARPS spectrograph . PR Photo 08b/03 : The HARPS spectrograph . PR Photo 08c/03 : HARPS spectrum of the star HD100623 ("raw"). PR Photo 08d/03 : Extracted spectral tracing of the star HD100623 . PR Photo 08e/03 : Measured stability of HARPS. The HARPS Spectrograph ESO PR Photo 08a/03 ESO PR Photo 08a/03 [Preview - JPEG: 449 x 400 pix - 58k [Normal - JPEG: 897 x 800 pix - 616k] [Full-Res - JPEG: 1374 x 1226 pix - 1.3M] ESO PR Photo 08b/03 ESO PR Photo 08b/03 [Preview - JPEG: 500 x 400 pix - 83k [Normal - JPEG: 999 x 800 pix - 727k] [Full-Res - JPEG: 1600 x 1281 pix - 1.3M] Captions : PR Photo 08a/03 and PR Photo 08b/03 show the HARPS spectrograph during laboratory tests. The vacuum tank is open so that some of the high-precision components inside can be seen. On PR Photo 08a/03 , the large optical grating by which the incoming stellar light is dispersed is visible on the top of the bench; it measures 200 x 800 mm. HARPS is a unique fiber-fed "echelle" spectrograph able to record at once the visible range of a stellar spectrum (wavelengths from 380 - 690 nm) with very high spectral resolving power (better than R = 100,000 ). Any light losses inside the instrument caused by reflections of the starlight in the various optical components (mirrors and gratings), have been minimised and HARPS therefore works very efficiently . First observations ESO PR Photo 08c/03 ESO PR Photo 08c/03 [Preview - JPEG: 400 x 490 pix - 52k [Normal - JPEG: 800 x 980 pix - 362k] [Full-Res - JPEG: 1976 x 1195 pix - 354k] ESO PR Photo 08d/03 ESO PR Photo 08d/03 [Preview - JPEG: 485 x 400 pix - 53k [Normal - JPEG: 969X x 800 pix - 160k] Captions : PR Photo 08c/03 displays a HARPS untreated ("raw") exposure of the star HD100623 , of the comparatively cool stellar spectral type K0V. The frame shows the complete image as recorded with the 4000 x 4000 pixel CCD detector in the focal plane of the spectrograph. The horizontal white lines correspond to the stellar spectrum, divided into 70 adjacent spectral bands which together cover the entire visible wavelength range from 380 to 690 nm. Some of the stellar absorption lines are seen as dark horizontal features; they are the spectral signatures of various chemical elements in the star's upper layers ("atmosphere"). Bright emission lines from the heavy element thorium are visible between the bands - they are exposed by a lamp in the spectrograph to calibrate the wavelengths. This allows measuring any instrumental drift, thereby guaranteeing the exceedingly high precision that qualifies HARPS. PR Photo 08d/03 displays a small part of the spectrum of the star HD100623 following on-line data extraction (in astronomical terminology: "reduction") of the previous raw frame, shown in PR Photo 08c/03 . Several deep absorption lines are clearly visible. During the first commissioning period in February 2003, the high efficiency of HARPS was clearly demonstrated by observations of a G6V-type star of magnitude 8. This star is similar to, but slightly less heavy than our Sun and about 5 times fainter than the faintest stars visible with the unaided eye. During an exposure lasting only one minute, a signal-to-noise ratio (S/N) of 45 per pixel was achieved - this allows to determine the star's radial velocity with an uncertainty of only ~1 m/s! . For comparison, the velocity of a briskly walking person is about 2 m/s. A main performance goal of the HARPS instrument has therefore been reached, already at this early moment. This result also demonstrates an impressive gain in efficiency of no less than about 75 times as compared to that achievable with its predecessor CORALIE. That instrument has been operating very successfully at the 1.2-m Swiss Leonard Euler telescope at La Silla and has discovered several exoplanets during the past years, see for instance ESO Press Releases ( PR 18/98 , PR 13/00 and PR 07/01 ). In practice, this means that this new planet searcher at La Silla can now investigate many more stars in a given observing time and consequently with much increased probability for success. Extraordinary stability ESO PR Photo 08e/03 ESO PR Photo 08e/03 [Preview - JPEG: 478 x 400 pix - 38k [Normal - JPEG: 955 x 800 pix - 111k] Captions : PR Photo 08e/03 is a powerful demonstration of the extraordinary stability of the HARPS spectrograph. It plots the instrumentally induced velocity change, as measured during one night (9 consecutive hours) in the commissioning period. The drift of the instrument is determined by computing the exact position of the Thorium emission lines. As can be seen, the drift is of the order of 1 m/s during 9 hours and is measured with an accuracy of only 20 cm/s. The goal of measuring velocities of stars with an accuracy comparable to that of a pedestrian has required extraordinary efforts for the design and construction of this instrument. Indeed, HARPS is the most stable spectrograph ever built for astronomical applications . A crucial measure in this respect is the location of the HARPS spectrograph in a climatized room in the telescope building. The starlight captured by the 3.6-m telescope is guided to the instrument through a very efficient optical fibre from the telescope's Cassegrain focus. Moreover, the spectrograph is placed inside a vacuum tank to reduce to a minimum any movement of the sensitive optical elements because of changes in pressure and temperature. The temperature of the critical components of HARPS itself is kept very stable, with less than 0.005 degree variation and the spectrum therefore drifts by less than 2 m/s per night. This is a very small value - 1 m/s corresponds to a displacement of the stellar spectrum on the CCD detector by about 1/1000 the size of one CCD pixel, which is equivalent to 15 nm or only about 150 silicon atoms! This drift is continuously measured by means of a Thorium spectrum which is simultaneously recorded on the detector with an accuracy of only 20 cm/s. PR Photo 08e/03 illustrates two fundamental issues: HARPS performs with an overall stability never before reached by any other astronomical spectrograph , and it is possible to measure any nightly drift with an accuracy never achieved before [1]. During this first commissioning period in February 2003, all instrument functions were tested, as well as the complete data flow system hard- and software. Already during the second test night, the data-reduction pipeline was used to obtain the extracted and wavelength-calibrated spectra in a completely automatic way. The first spectra obtained with HARPS will now allow the construction of templates needed to compute the radial velocities of different types of stars with the best efficiency. The second commissioning period in June will then be used to achieve the optimal performance of this new, very powerful instrument. Astronomers in the ESO community will have the opportunity to observe with HARPS from October 1, 2003. Other research opportunities opening This superb radial velocity machine will also play an important role for the study of stellar interiors by asteroseismology. Oscillation modes were recently discovered in the nearby solar-type star Alpha Centauri A from precise radial velocity measurements carried out with CORALIE (see ESO PR 15/01 ). HARPS is able to carry out similar measurements on fainter stars, thus reaching a much wider range of masses, spectral characteristics and ages. Michel Mayor , Director of the Geneva Observatory and co-discoverer of the first known exoplanet, is confident: "With HARPS operating so well already during the first test nights, there is every reason to believe that we shall soon see some breakthroughs in this field also" . The HARPS Consortium HARPS has been designed and built by an international consortium of research institutes, led by the Observatoire de Genève (Switzerland) and including Observatoire de Haute-Provence (France), Physikalisches Institut der Universität Bern (Switzerland), the Service d'Aeronomie (CNRS, France), as well as ESO La Silla and ESO Garching . The HARPS consortium has been granted 100 observing nights per year during a 5-year period at the ESO 3.6-m telescope to perform what promises to be the most ambitious systematic search for exoplanets so far implemented worldwide . The project team is directed by Michel Mayor (Principal Investigator), Didier Queloz (Mission Scientist), Francesco Pepe (Project Managers Consortium) and Gero Rupprecht (ESO representative).

Comparative SEM analysis of nine F22 aligner cleaning strategies.

PubMed

Lombardo, Luca; Martini, Marco; Cervinara, Francesca; Spedicato, Giorgio Alfredo; Oliverio, Teresa; Siciliani, Giuseppe

2017-12-01

The orthodontics industry has paid great attention to the aesthetics of orthodontic appliances, seeking to make them as invisible as possible. There are several advantages to clear aligner systems, including aesthetics, comfort, chairside time reduction, and the fact that they can be removed for meals and oral hygiene procedures. Five patients were each given a series of F22 aligners, each to be worn for 14 days and nights, with the exception of meal and brushing times. Patients were instructed to clean each aligner using a prescribed strategy, and sections of the used aligners were observed under SEM. One grey-scale SEM image was saved per aligner in JPEG format with an 8-bit colour depth, and a total of 45 measurements on the grey scale ("Value" variable) were made. This dataset was analysed statistically via repeated measures ANOVA to determine the effect of each of the nine cleaning strategies in each of the five patients. A statistically significant difference in the efficacy of the cleaning strategies was detected. Specifically, rinsing with water alone was significantly less efficacious, and a combination of cationic detergent solution and ultrasonication was significantly more efficacious than the other methods (p < 0.05). Of the nine cleaning strategies examined, only that involving 5 min of ultrasonication at 42 k Hz combined with a 0.3% germicidal cationic detergent was observed to be statistically effective at removing the bacterial biofilm from the surface of F22 aligners.

Is this a Brown Dwarf or an Exoplanet?

NASA Astrophysics Data System (ADS)

2005-04-01

Since the discovery in 1995 of the first planet orbiting a normal star other than the Sun, there are now more than 150 candidates of these so-called exoplanets known. Most of them are detected by indirect methods, based either on variations of the radial velocity or the dimming of the star as the planet passes in front of it (see ESO PR 06/03, ESO PR 11/04 and ESO PR 22/04). Astronomers would, however, prefer to obtain a direct image of an exoplanet, allowing them to better characterize the object's physical nature. This is an exceedingly difficult task, as the planet is generally hidden in the "glare" of its host star. To partly overcome this problem, astronomers study very young objects. Indeed, sub-stellar objects are much hotter and brighter when young and therefore can be more easily detected than older objects of similar mass. Based on this approach, it might well be that last year's detection of a feeble speck of light next to the young brown dwarf 2M1207 by an international team of astronomers using the ESO Very Large Telescope (ESO PR 23/04) is the long-sought bona-fide image of an exoplanet. A recent report based on data from the Hubble Space Telescope seems to confirm this result. The even more recent observations made with the Spitzer Space Telescope of the warm infrared glows of two previously detected "hot Jupiter" planets is another interesting result in this context. This wealth of new results, obtained in the time span of a few months, illustrates perfectly the dynamic of this field of research. Tiny Companion ESO PR Photo 10a/05 ESO PR Photo 10a/05 The Sub-Stellar Companion to GQ Lupi (NACO/VLT) [Preview - JPEG: 400 x 429 pix - 22k] [Normal - JPEG: 800 x 875 pix - 132k] [Full Res - JPEG: 1042 x 1116 pix - 241k] Caption: ESO PR Photo 10a/05 shows the VLT NACO image, taken in the Ks-band, of GQ Lupi. The feeble point of light to the right of the star is the newly found cold companion. It is 250 times fainter than the star itself and it located 0.73 arcsecond west. At the distance of GQ Lupi, this corresponds to a distance of roughly 100 astronomical units. North is up and East is to the left. Now, a different team of astronomers [1] has possibly made another important breakthrough in this field by finding a tiny companion to a young star. Since several years these scientists have conducted a search for planets and low-mass objects, in particular around stars still in their formation process - so-called T-Tauri stars - using both the direct imaging and the radial velocity techniques. One of the objects on their list is GQ Lupi, a young T-Tauri star, located in the Lupus I (the Wolf) cloud, a region of star formation about 400 or 500 light-years away. The star GQ Lupi is apparently a very young object still surrounded by a disc, with an age between 100,000 and 2 million years. The astronomers observed GQ Lupi on 25 June 2004 with the adaptive optics instrument NACO attached to Yepun, the fourth 8.2-m Unit Telescope of the Very Large Telescope located on top of Cerro Paranal (Chile). The instrument's adaptive optics (AO) overcomes the distortion induced by atmospheric turbulence, producing extremely sharp near-infrared images. As ESO PR Photo 10a/05 shows, the series of NACO exposures clearly reveal the presence of the tiny companion, located in the close vicinity of the star. This newly found object is only 0.7 arcsecond away, and would have been overlooked without the use of the adaptive optics capabilities of NACO. At the distance of GQ Lupi, the separation between the star and its feeble companion is about 100 astronomical units (or 100 times the distance between the Sun and the Earth). This is roughly 2.5 times the distance between Pluto and the Sun. The companion, called GQ Lupi B or GQ Lupi b [2], is roughly 250 times fainter than GQ Lupi A as seen in this series of image. Further images obtained with NACO in August and September confirmed the presence and the position of this companion. Moving in the same direction ESO PR Photo 10b/05 ESO PR Photo 10b/05 Observed Separation between GQ Lupi and its Companion [Preview - JPEG: 400 x 554 pix - 34k] [Normal - JPEG: 800 x 1107 pix - 136k] [Full Res - JPEG: 1560 x 2158 pix - 319k] Caption: ESO PR Photo 10a/05 presents the observed separations between the primary star GQ Lupi and its companion, as deduced from the images taken with HST in 1999 (left), Subaru in 2002 (middle) and NACO on the VLT in 2004 (right). All the observed separations are consistent with no changes in separation, implying the two objects move in the same direction (red line). The curved line shows the change in separation expected if the faint object was a background star, due to the proper motion of GQ Lup. The astronomers then uncovered that the star had been previously observed by the Subaru telescope as well as by the Hubble Space Telescope. They retrieved the corresponding images from the data archives of these facilities for further analysis. The older images, taken in July 2002 and April 1999, respectively, also showed the presence of the companion, giving the astronomers the possibility of precisely measuring the position of the two objects over a period of several years. This in turn allowed them to determine if the stars move together in the sky - as should be expected if they are gravitationally bound together - or if the smaller object is only a background object, just aligned by chance. From their measurements, the astronomers found that the separation between the two objects did not change over the five-year period covered by the observations (see ESO PR Photo 10b/05). For the scientists this is a clear proof that both objects are moving in the same direction in the sky. "If the faint object would be a background object", says Ralph Neuhäuser of the University of Jena (Germany) and leader of the team, "we would see a change in separation as GQ Lup would be moving in the sky. From 1999 to 2004, the separation would have changed by 0.15 arcsec, while we are confident that the change is a least 20 times smaller." Exoplanet or brown dwarf? ESO PR Photo 10c/05 ESO PR Photo 10c/05 Spectrum of the Companion of GQ Lupi (NACO/VLT) [Preview - JPEG: 400 x 554 pix - 53k] [Normal - JPEG: 800 x 1108 pix - 200k] [Full Res - JPEG: 1570 x 2175 pix - 518k] Caption: ESO PR Photo 10c/05 shows the NACO spectrum of the companion of GQ Lupi (thick line, bottom) in the near-infrared (around the Ks-band at 2.2 microns). For comparison, the spectrum of a young M8 brown dwarf (top, in red) and of a L2 brown dwarf (second line, in brown) are shown. Also presented is the spectrum calculated using theoretical models for an object having a temperature of 2,000 degrees. This theoretical spectrum compares well with the observed one. To further probe the physical nature of the newly discovered object, the astronomers used NACO on the VLT to take a series of spectra. These showed the typical signature of a very cool object, in particular the presence of water and CO bands. Taking into account the infrared colours and the spectral data available, atmospheric model calculations point to a temperature between 1,600 and 2,500 degrees and a radius that is twice as large as Jupiter (see PR Photo 10c/05). According to this, GQ Lupi B is thus a cold and rather small object. But what is the nature of this faint object? Is it a bona-fide exoplanet or is it a brown dwarf, those "failed" stars that are not massive enough to centrally produce major nuclear reactions? Although the borderline between the two is still a matter of debate, one way to distinguish between the two is by their mass (as this is also done between brown dwarfs and stars): (giant) planets are lighter than about 13 Jupiter-masses (the critical mass needed to ignite deuterium fusion), brown dwarfs are heavier. What about GQ Lupi b? Unfortunately, the new observations do not provide a direct estimate of the mass of the object. Thus the astronomers must rely on comparison with theoretical models of such objects. But this is not as easy as it sounds. If, as astronomers generally accept, GQ Lupi A and B formed simultaneously, the newly found object is very young. The problem is that for such very young objects, traditional theoretical models are probably not applicable. If they are used, however, they provide an estimate of the mass of the object that lies somewhere between 3 to 42 Jupiter-masses, i.e. encompassing both the planet and the brown dwarf domains. These early phases in brown dwarf and planet formation are essentially unknown territory for models. It is very difficult to model the early collapse of the gas clouds given the conditions around the forming parent star. One set of models, specifically tailored to model the very young objects, provide masses as low as one to two Jupiter-masses. But as Ralph Neuhäuser points out "these new models still need to be calibrated, before the mass of such companions can be determined confidently". The astronomers also stress that from the comparison between their VLT/NACO spectra and the theoretical models of co-author Peter Hauschildt from Hamburg University (Germany), they arrive at the conclusion that the best fit is obtained for an object having roughly 2 Jupiter radii and 2 Jupiter masses. If this result holds, GQ Lupi b would thus be the youngest and lightest exoplanet to have been imaged. Further observations are still required to precisely determine the nature of GQ Lupi B. If the two objects are indeed bound, then the smallest object will need more than 1,000 years to complete an orbit around its host star. This is of course too long to wait but the effect of the orbital motion might possibly be detectable - as a tiny change in the separation between the two objects - in a few years. The team therefore plans to perform regular observations of this object using NACO on the VLT, in order to detect this motion. No doubt that in the mean time, further progress on the theoretical side will be achieved and that many sensational discoveries in this field will be made. More information The research presented in this ESO Press Release is published in a Letter to the Editor accepted for publication by Astronomy and Astrophysics ("Evidence for a co-moving sub-stellar companion of GQ Lup" by R. Neuhäuser et al.) and available in PDF form at http://www.edpsciences.org/articles/aa/pdf/forthpdf/aagj061_forth.pdf.

Compression for radiological images

NASA Astrophysics Data System (ADS)

Wilson, Dennis L.

1992-07-01

The viewing of radiological images has peculiarities that must be taken into account in the design of a compression technique. The images may be manipulated on a workstation to change the contrast, to change the center of the brightness levels that are viewed, and even to invert the images. Because of the possible consequences of losing information in a medical application, bit preserving compression is used for the images used for diagnosis. However, for archiving the images may be compressed to 10 of their original size. A compression technique based on the Discrete Cosine Transform (DCT) takes the viewing factors into account by compressing the changes in the local brightness levels. The compression technique is a variation of the CCITT JPEG compression that suppresses the blocking of the DCT except in areas of very high contrast.

VLTI First Fringes with Two Auxiliary Telescopes at Paranal

NASA Astrophysics Data System (ADS)

2005-03-01

World's Largest Interferometer with Moving Optical Telescopes on Track Summary The Very Large Telescope Interferometer (VLTI) at Paranal Observatory has just seen another extension of its already impressive capabilities by combining interferometrically the light from two relocatable 1.8-m Auxiliary Telescopes. Following the installation of the first Auxiliary Telescope (AT) in January 2004 (see ESO PR 01/04), the second AT arrived at the VLT platform by the end of 2004. Shortly thereafter, during the night of February 2 to 3, 2005, the two high-tech telescopes teamed up and quickly succeeded in performing interferometric observations. This achievement heralds an era of new scientific discoveries. Both Auxiliary Telescopes will be offered from October 1, 2005 to the community of astronomers for routine observations, together with the MIDI instrument. By the end of 2006, Paranal will be home to four operational ATs that may be placed at 30 different positions and thus be combined in a very large number of ways ("baselines"). This will enable the VLTI to operate with enormous flexibility and, in particular, to obtain extremely detailed (sharp) images of celestial objects - ultimately with a resolution that corresponds to detecting an astronaut on the Moon. PR Photo 07a/05: Paranal Observing Platform with AT1 and AT2 PR Photo 07b/05: AT1 and AT2 with Open Domes PR Photo 07c/05: Evening at Paranal with AT1 and AT2 PR Photo 07d/05: AT1 and AT2 under the Southern Sky PR Photo 07e/05: First Fringes with AT1 and AT2 PR Video Clip 01/05: Two ATs at Paranal (Extract from ESO Newsreel 15) A Most Advanced Device ESO PR Video 01/05 ESO PR Video 01/05 Two Auxiliary Telescopes at Paranal [QuickTime: 160 x 120 pix - 37Mb - 4:30 min] [QuickTime: 320 x 240 pix - 64Mb - 4:30 min] ESO PR Photo 07a/05 ESO PR Photo 07a/05 [Preview - JPEG: 493 x400 pix - 44k] [Normal - JPEG: 985 x 800 pix - 727k] [HiRes - JPEG: 5000 x 4060 pix - 13.8M] Captions: ESO PR Video Clip 01/05 is an extract from ESO Video Newsreel 15, released on March 14, 2005. It provides an introduction to the VLT Interferometer (VLTI) and the two Auxiliary Telescopes (ATs) now installed at Paranal. ESO PR Photo 07a/05 shows the impressive ensemble at the summit of Paranal. From left to right, the enclosure of VLT Antu, Kueyen and Melipal, AT1, the VLT Survey Telescope (VST) in the background, AT2 and VLT Yepun. Located at the summit of the 2,600-m high Cerro Paranal in the Atacama Desert (Chile), ESO's Very Large Telescope (VLT) is at the forefront of astronomical technology and is one of the premier facilities in the world for optical and near-infrared observations. The VLT is composed of four 8.2-m Unit Telescope (Antu, Kueyen, Melipal and Yepun). They have been progressively put into service together with a vast suite of the most advanced astronomical instruments and are operated every night in the year. Contrary to other large astronomical telescopes, the VLT was designed from the beginning with the use of interferometry as a major goal. The href="/instruments/vlti">VLT Interferometer (VLTI) combines starlight captured by two 8.2- VLT Unit Telescopes, dramatically increasing the spatial resolution and showing fine details of a large variety of celestial objects. The VLTI is arguably the world's most advanced optical device of this type. It has already demonstrated its powerful capabilities by addressing several key scientific issues, such as determining the size and the shape of a variety of stars (ESO PR 22/02, PR 14/03 and PR 31/03), measuring distances to stars (ESO PR 25/04), probing the innermost regions of the proto-planetary discs around young stars (ESO PR 27/04) or making the first detection by infrared interferometry of an extragalactic object (ESO PR 17/03). "Little Brothers" ESO PR Photo 07b/05 ESO PR Photo 07b/05 [Preview - JPEG: 597 x 400 pix - 47k] [Normal - JPEG: 1193 x 800 pix - 330k] [HiRes - JPEG: 5000 x 3354 pix - 10.0M] ESO PR Photo 07c/05 ESO PR Photo 07c/05 [Preview - JPEG: 537 x 400 pix - 31k] [Normal - JPEG: 1074 x 800 pix - 555k] [HiRes - JPEG: 3000 x 2235 pix - 6.0M] ESO PR Photo 07d/05 ESO PR Photo 07d/05 [Preview - JPEG: 400 x 550 pix - 60k] [Normal - JPEG: 800 x 1099 pix - 946k] [HiRes - JPEG: 2414 x 3316 pix - 11.0M] Captions: ESO PR Photo 07b/05 shows VLTI Auxiliary Telescopes 1 and 2 (AT1 and AT2) in the early evening light, with the spherical domes opened and ready for observations. In ESO PR Photo 07c/05, the same scene is repeated later in the evening, with three of the large telescope enclosures in the background. This photo and ESO PR Photo 07c/05 which is a time-exposure with AT1 and AT2 under the beautiful night sky with the southern Milky Way band were obtained by ESO staff member Frédéric Gomté. However, most of the time the large telescopes are used for other research purposes. They are therefore only available for interferometric observations during a limited number of nights every year. Thus, in order to exploit the VLTI each night and to achieve the full potential of this unique setup, some other (smaller), dedicated telescopes were included into the overall VLT concept. These telescopes, known as the VLTI Auxiliary Telescopes (ATs), are mounted on tracks and can be placed at precisely defined "parking" observing positions on the observatory platform. From these positions, their light beams are fed into the same common focal point via a complex system of reflecting mirrors mounted in an underground system of tunnels. The Auxiliary Telescopes are real technological jewels. They are placed in ultra-compact enclosures, complete with all necessary electronics, an air conditioning system and cooling liquid for thermal control, compressed air for enclosure seals, a hydraulic plant for opening the dome shells, etc. Each AT is also fitted with a transporter that lifts the telescope and relocates it from one station to another. It moves around with its own housing on the top of Paranal, almost like a snail. Moreover, these moving ultra-high precision telescopes, each weighing 33 tonnes, fulfill very stringent mechanical stability requirements: "The telescopes are unique in the world", says Bertrand Koehler, the VLTI AT Project Manager. "After being relocated to a new position, the telescope is repositioned to a precision better than one tenth of a millimetre - that is, the size of a human hair! The image of the star is stabilized to better than thirty milli-arcsec - this is how we would see an object of the same size as one of the VLT enclosures on the Moon. Finally, the path followed by the light inside the telescope after bouncing on ten mirrors is stable to better than a few nanometres, which is the size of about one hundred atoms." A World Premiere ESO PR Photo 07e/05 ESO PR Photo 07e/05 "First Fringes" with two ATs [Preview - JPEG: 400 x 559 pix - 61k] [Normal - JPEG: 800 x 1134 pix - 357k] Caption: ESO PR Photo 07e/05 The "First Fringes" obtained with the first two VLTI Auxiliary Telescopes, as seen on the computer screen during the observation. The fringe pattern arises when the light beams from the two 1.8-m telescopes are brought together inside the VINCI instrument. The pattern itself contains information about the angular extension of the observed object, here the 6th-magnitude star HD62082. The fringes are acquired by moving a mirror back and forth around the position of equal path length for the two telescopes. One such scan can be seen in the third row window. This pattern results from the raw interferometric signals (the last two rows) after calibration and filtering using the photometric signals (the 4th and 5th row). The first two rows show the spectrum of the fringe pattern signal. More details about the interpretation of this pattern is given in Appendix A of PR 06/01. The possibility to move the ATs around and thus to perform observations with a large number of different telescope configurations ensures a great degree of flexibility, unique for an optical interferometric installation of this size and crucial for its exceptional performance. The ATs may be placed at 30 different positions and thus be combined in a very large number of ways. If the 8.2-m VLT Unit Telescopes are also taken into account, no less than 254 independent pairings of two telescopes ("baselines"), different in length and/or orientation, are available. Moreover, while the largest possible distance between two 8.2-m telescopes (ANTU and YEPUN) is about 130 metres, the maximal distance between two ATs may reach 200 metres. As the achievable image sharpness increases with telescope separation, interferometric observations with the ATs positioned at the extreme positions will therefore yield sharper images than is possible by combining light from the large telescopes alone. All of this will enable the VLTI to obtain exceedingly detailed (sharp) and very complete images of celestial objects - ultimately with a resolution that corresponds to detecting an astronaut on the Moon. Auxiliary Telescope no. 1 (AT1) was installed on the observatory's platform in January 2004. Now, one year later, the second of the four to be delivered, has been integrated into the VLTI. The installation period lasted two months and ended around midnight during the night of February 2-3, 2005. With extensive experience from the installation of AT1, the team of engineers and astronomers were able to combine the light from the two Auxiliary Telescopes in a very short time. In fact, following the necessary preparations, it took them only five minutes to adjust this extremely complex optical system and successfully capture the "First Fringes" with the VINCI test instrument! The star which was observed is named HD62082 and is just at the limit of what can be observed with the unaided eye (its visual magnitude is 6.2). The fringes were as clear as ever, and the VLTI control system kept them stable for more than one hour. Four nights later this exercise was repeated successfully with the mid-infrared science instrument MIDI. Fringes on the star Alphard (Alpha Hydrae) were acquired on February 7 at 4:05 local time. For Roberto Gilmozzi, Director of ESO's La Silla Paranal Observatory, "this is a very important new milestone. The introduction of the Auxiliary Telescopes in the development of the VLT Interferometer will bring interferometry out of the specialist experiment and into the domain of common user instrumentation for every astronomer in Europe. Without doubt, it will enormously increase the potentiality of the VLTI." With two more telescopes to be delivered within a year to the Paranal Observatory, ESO cements its position as world-leader in ground-based optical astronomy, providing Europe's scientists with the tools they need to stay at the forefront in this exciting science. The VLT Interferometer will, for example, allow astronomers to study details on the surface of stars or to probe proto-planetary discs and other objects for which ultra-high precision imaging is required. It is premature to speculate on what the Very Large Telescope Interferometer will soon discover, but it is easy to imagine that there may be quite some surprises in store for all of us.

Shuttle Systems 3-D Applications: Application of 3-D Graphics in Engineering Training for Shuttle Ground Processing

NASA Technical Reports Server (NTRS)

Godfrey, Gary S.

2003-01-01

This project illustrates an animation of the orbiter mate to the external tank, an animation of the OMS POD installation to the orbiter, and a simulation of the landing gear mechanism at the Kennedy Space Center. A detailed storyboard was created to reflect each animation or simulation. Solid models were collected and translated into Pro/Engineer's prt and asm formats. These solid models included computer files of the: orbiter, external tank, solid rocket booster, mobile launch platform, transporter, vehicle assembly building, OMS POD fixture, and landing gear. A depository of the above solid models was established. These solid models were translated into several formats. This depository contained the following files: stl for sterolithography, stp for neutral file work, shrinkwrap for compression, tiff for photoshop work, jpeg for Internet use, and prt and asm for Pro/Engineer use. Solid models were created of the material handling sling, bay 3 platforms, and orbiter contact points. Animations were developed using mechanisms to reflect each storyboard. Every effort was made to build all models technically correct for engineering use. The result was an animated routine that could be used by NASA for training material handlers and uncovering engineering safety issues.

NASA Earth Observations (NEO): Data Imagery for Education and Visualization

NASA Astrophysics Data System (ADS)

Ward, K.

2008-12-01

NASA Earth Observations (NEO) has dramatically simplified public access to georeferenced imagery of NASA remote sensing data. NEO targets the non-traditional data users who are currently underserved by functionality and formats available from the existing data ordering systems. These users include formal and informal educators, museum and science center personnel, professional communicators, and citizen scientists. NEO currently serves imagery from 45 different datasets with daily, weekly, and/or monthly temporal resolutions, with more datasets currently under development. The imagery from these datasets is produced in coordination with several data partners who are affiliated either with the instrument science teams or with the respective data processing center. NEO is a system of three components -- website, WMS (Web Mapping Service), and ftp archive -- which together are able to meet the wide-ranging needs of our users. Some of these needs include the ability to: view and manipulate imagery using the NEO website -- e.g., applying color palettes, resizing, exporting to a variety of formats including PNG, JPEG, KMZ (Google Earth), GeoTIFF; access the NEO collection via a standards-based API (WMS); and create customized exports for select users (ftp archive) such as Science on a Sphere, NASA's Earth Observatory, and others.

Providing Internet Access to High-Resolution Lunar Images

NASA Technical Reports Server (NTRS)

Plesea, Lucian

2008-01-01

The OnMoon server is a computer program that provides Internet access to high-resolution Lunar images, maps, and elevation data, all suitable for use in geographical information system (GIS) software for generating images, maps, and computational models of the Moon. The OnMoon server implements the Open Geospatial Consortium (OGC) Web Map Service (WMS) server protocol and supports Moon-specific extensions. Unlike other Internet map servers that provide Lunar data using an Earth coordinate system, the OnMoon server supports encoding of data in Moon-specific coordinate systems. The OnMoon server offers access to most of the available high-resolution Lunar image and elevation data. This server can generate image and map files in the tagged image file format (TIFF) or the Joint Photographic Experts Group (JPEG), 8- or 16-bit Portable Network Graphics (PNG), or Keyhole Markup Language (KML) format. Image control is provided by use of the OGC Style Layer Descriptor (SLD) protocol. Full-precision spectral arithmetic processing is also available, by use of a custom SLD extension. This server can dynamically add shaded relief based on the Lunar elevation to any image layer. This server also implements tiled WMS protocol and super-overlay KML for high-performance client application programs.

Providing Internet Access to High-Resolution Mars Images

NASA Technical Reports Server (NTRS)

Plesea, Lucian

2008-01-01

The OnMars server is a computer program that provides Internet access to high-resolution Mars images, maps, and elevation data, all suitable for use in geographical information system (GIS) software for generating images, maps, and computational models of Mars. The OnMars server is an implementation of the Open Geospatial Consortium (OGC) Web Map Service (WMS) server. Unlike other Mars Internet map servers that provide Martian data using an Earth coordinate system, the OnMars WMS server supports encoding of data in Mars-specific coordinate systems. The OnMars server offers access to most of the available high-resolution Martian image and elevation data, including an 8-meter-per-pixel uncontrolled mosaic of most of the Mars Global Surveyor (MGS) Mars Observer Camera Narrow Angle (MOCNA) image collection, which is not available elsewhere. This server can generate image and map files in the tagged image file format (TIFF), Joint Photographic Experts Group (JPEG), 8- or 16-bit Portable Network Graphics (PNG), or Keyhole Markup Language (KML) format. Image control is provided by use of the OGC Style Layer Descriptor (SLD) protocol. The OnMars server also implements tiled WMS protocol and super-overlay KML for high-performance client application programs.

A new compression format for fiber tracking datasets.

PubMed

Presseau, Caroline; Jodoin, Pierre-Marc; Houde, Jean-Christophe; Descoteaux, Maxime

2015-04-01

A single diffusion MRI streamline fiber tracking dataset may contain hundreds of thousands, and often millions of streamlines and can take up to several gigabytes of memory. This amount of data is not only heavy to compute, but also difficult to visualize and hard to store on disk (especially when dealing with a collection of brains). These problems call for a fiber-specific compression format that simplifies its manipulation. As of today, no fiber compression format has yet been adopted and the need for it is now becoming an issue for future connectomics research. In this work, we propose a new compression format, .zfib, for streamline tractography datasets reconstructed from diffusion magnetic resonance imaging (dMRI). Tracts contain a large amount of redundant information and are relatively smooth. Hence, they are highly compressible. The proposed method is a processing pipeline containing a linearization, a quantization and an encoding step. Our pipeline is tested and validated under a wide range of DTI and HARDI tractography configurations (step size, streamline number, deterministic and probabilistic tracking) and compression options. Similar to JPEG, the user has one parameter to select: a worst-case maximum tolerance error in millimeter (mm). Overall, we find a compression factor of more than 96% for a maximum error of 0.1mm without any perceptual change or change of diffusion statistics (mean fractional anisotropy and mean diffusivity) along bundles. This opens new opportunities for connectomics and tractometry applications. Copyright © 2014 Elsevier Inc. All rights reserved.

"First Light" for the VLT Interferometer

NASA Astrophysics Data System (ADS)

2001-03-01

Excellent Fringes From Bright Stars Prove VLTI Concept Summary Following the "First Light" for the fourth of the 8.2-m telescopes of the VLT Observatory on Paranal in September 2000, ESO scientists and engineers have just successfully accomplished the next major step of this large project. On March 17, 2001, "First Fringes" were obtained with the VLT Interferometer (VLTI) - this important event corresponds to the "First Light" for an astronomical telescope. At the VLTI, it occurred when the infrared light from the bright star Sirius was captured by two small telescopes and the two beams were successfully combined in the subterranean Interferometric Laboratory to form the typical pattern of dark and bright lines known as " interferometric fringes ". This proves the success of the robust VLTI concept, in particular of the "Delay Line". On the next night, the VLTI was used to perform a scientific measurement of the angular diameter of another comparatively bright star, Alpha Hydrae ( Alphard ); it was found to be 0.00929±0.00017 arcsec . This corresponds to the angular distance between the two headlights of a car as seen from a distance of approx. 35,000 kilometres. The excellent result was obtained during a series of observations, each lasting 2 minutes, and fully confirming the impressive predicted abilities of the VLTI . This first observation with the VLTI is a monumental technological achievement, especially in terms of accuracy and stability . It crucially depends on the proper combination and functioning of a large number of individual opto-mechnical and electronic elements. This includes the test telescopes that capture the starlight, continuous and extremely precise adjustment of the various mirrors that deflect the light beams as well as the automatic positioning and motion of the Delay Line carriages and, not least, the optimal tuning of the VLT INterferometer Commissionning Instrument (VINCI). These initial observations prove the overall concept for the VLTI . It was first envisaged in the early 1980's and has been continuously updated, as new technologies and materials became available during the intervening period. The present series of functional tests will go on for some time and involve many different configurations of the small telescopes and the instrument. It is then expected that the first combination of light beams from two of the VLT 8.2-m telescopes will take place in late 2001 . According to current plans, regular science observations will start from 2002, when the European and international astronomical community will have access to the full interferometric facility and the specially developed VLTI instrumentation now under construction. A wide range of scientific investigations will then become possible, from the search for planets around nearby stars, to the study of energetic processes at the cores of distant galaxies. With its superior angular resolution (image sharpness), the VLT is now beginning to open a new era in observational optical and infrared astronomy. The ambition of ESO is to make this type of observations available to all astronomers, not just the interferometry specialists. Video Clip 03/01 : Various video scenes related to the VLTI and the "First Fringes". PR Photo 10a/01 : "First Fringes" from the VLTI on the computer screen. PR Photo 10b/01 : Celebrating the VLTI "First Fringes" . PR Photo 10c/01 : Overview of the VLT Interferometer . PR Photo 10d/01 : Interferometric observations: Fringes from two stars of different angular size . PR Photo 10e/01 : Interferometric observations: Change of fringes with increasing baseline . PR Photo 10f/01 : Aerial view of the installations for the VLTI on the Paranal platform. PR Photo 10g/01 : Stations for the VLTI Auxiliary Telescopes. PR Photo 10h/01 : A test siderostat in place for observations. PR Photo 10i/01 : A test siderostat ( close-up ). PR Photo 10j/01 : One of the Delay Line carriages in the Interferometric Tunnel. PR Photo 10k/01 : The VINCI instrument in the Interferometric Laboratory. PR Photo 10l/01 : The VLTI Control Room . "First Fringes at the VLTI": A great moment! First light of the VLT Interferometer - PR Video Clip 03/01 [MPEG - x.xMb] ESO PR Video Clip 03/01 "First Light of the VLT Interferometer" (March 2001) (5025 frames/3:21x min) [MPEG Video+Audio; 144x112 pix; 6.9Mb] [MPEG Video+Audio; 320x240 pix; 13.7Mb] [RealMedia; streaming; 34kps] [RealMedia; streaming; 200kps] ESO Video Clip 03/01 provides a quick overview of the various elements of the VLT Interferometer and the important achievement of "First Fringes". The sequence is: General view of the Paranal observing platform. The "stations" for the VLTI Auxiliary Telescopes. Statement by the Manager of the VLT project, Massimo Tarenghi . One of the VLTI test telescopes ("siderostats") is being readied for observations. The Delay Line carriages in the Interferometric Tunnel move. The VINCI instrument in the Interferometric Laboratory is adjusted. Platform at sunset, before the observations. Astronomers and engineers prepare for the first observations in the VLTI Control Room in the Interferometric Building. "Interferometric Fringes" on the computer screen. Concluding statements by Andreas Glindemann , VLTI Project Leader, and Massimo Tarenghi . Distant view of the installations at Paranal at sunset (on March 1, 2001). The moment of "First Fringes" at the VLTI occurred in the evening of March 17, 2001 . The bright star Sirius was observed with two small telescopes ("siderostats"), specially constructed for this purpose during the early VLTI test phases. ESO PR Video Clip 03/01 includes related scenes and is based on a more comprehensive documentation, now available as ESO Video News Reel No. 12. The star was tracked by the two telescopes and the light beams were guided via the Delay Lines in the Interferometric Tunnel to the VINCI instrument [1] at the Interferometric Laboratory. The path lengths were continuously adjusted and it was possible to keep them stable to within 1 wavelength (2.2 µm, or 0.0022 mm) over a period of at least 2 min. Next night, several other stars were observed, enabling the ESO astronomers and engineers in the Control Room to obtain stable fringe patterns more routinely. With the special software developed, they also obtained 'on-line' an accurate measurement of the angular diameter of a star. This means that the VLTI delivered its first valid scientific result, already during this first test . First observation with the VLTI ESO PR Photo 10a/01 ESO PR Photo 10a/01 [Preview - JPEG: 400 x 315 pix - 96k] [Normal - JPEG: 800 x 630 pix - 256k] [Hi-Res - JPEG: 3000 x 2400 pix - 1.7k] ESO PR Photo 10b/01 ESO PR Photo 10b/01 [Preview - JPEG: 400 x 218 pix - 80k] [Normal - JPEG: 800 x 436 pix - 204k] Caption : PR Photo 10a/01 The "first fringes" obtained with the VLTI, as seen on the computer screen during the observation (upper right window). The fringe pattern arises when the light beams from two small telescopes are brought together in the VINCI instrument. The pattern itself contains information about the angular extension of the observed object, here the bright star Sirius . More details about the interpretation of this pattern is given in Appendix A. PR Photo 10b/01 : Celebrating the moment of "First Fringes" at the VLTI. At the VLTI control console (left to right): Pierre Kervella , Vincent Coudé du Foresto , Philippe Gitton , Andreas Glindemann , Massimo Tarenghi , Anders Wallander , Roberto Gilmozzi , Markus Schoeller and Bill Cotton . Bertrand Koehler was also present and took the photo. Technical information about PR Photo 10a/01 is available below. Following careful adjustment of all of the various components of the VLTI, the first attempt to perform a real observation was initiated during the night of March 16-17, 2001. "Fringes" were actually acquired during several seconds, leading to further optimization of the Delay Line optics. The next night, March 17-18, stable fringes were obtained on the bright stars Sirius and Lambda Velorum . The following night, the first scientifically valid results were obtained during a series of observations of six stars. One of these, Alpha Hydrae , was measured twice, with an interval of 15 minutes between the 2-min integrations. The measured diameters were highly consistent, with a mean of 0.00929±0.00017 arcsec. This new VLTI measurement is in full agreement with indirect (photometric) estimates of about 0.009 arcsec. The overall performance of the VLTI was excellent already in this early stage. For example, the interferometric efficiency ('contrast' on a stellar point source) was measured to be 87% and stable to within 1.3% over several days. This performance will be further improved following additional tuning. The entire operation of the VLTI was performed remotely from the Control Room, as this will also be the case in the future. Another great advantage of the VLTI concept is the possibility to analyse the data at the control console. This is one of the key features of the VLTI that contributes to make it a very user-friendly facility. Overview of the VLT Interferometer ESO PR Photo 10c/01 ESO PR Photo 10c/01 [Preview - JPEG: 400 x 410 pix - 60k] [Normal - JPEG: 800 x 820 pix - 124k] [Hi-Res - JPEG: 3000 x 3074 pix - 680k] Caption : PR Photo 10c/01 Overview of the VLT Interferometer, with the various elements indicated. In this case, the light beams from two of the 8.2-m telescopes are combined. The VINCI instrument that was used for the present test, is located at the common focus in the Interferometric Laboratory. The interferometric principle is based on the phase-stable combination of light beams from two or more telescopes at a common interferometric focus , cf. PR Photo 10c/01 . The light from a celestial object is captured simultaneously by two or more telescopes. For the first tests, two "siderostats" with 40-cm aperture are used; later on, two or more 8.2-m Unit Telescopes will be used, as well as several moving 1.8-m Auxiliary Telescopes (ATs), now under construction at the AMOS factory in Belgium. Via several mirrors and through the Delay Line, that continuously compensates for changes in the path length introduced by the Earth's rotation as well as by other effects (e.g., atmospheric turbulence), the light beams are guided towards the interferometric instrument VINCI at the common interferometric focus. It is located in the subterranean Interferometric Laboratory , at the centre of the observing platform on the top of the Paranal mountain. Photos of some of the VLTI elements are shown in Appendix B. The interferometric technique allows achieving images, as sharp as those of a telescope with a diameter equivalent to the largest distance between the telescopes in the interferometer. For the VLTI, this distance is about 200 metres, resulting in a resolution of 0.001 arcsec in the near-infrared spectral region (at 1 µm wavelength), or 0.0005 arcsec in visual light (500 nm). The latter measure corresponds to about 2 metres on the surface of the Moon. The VLTI instruments The installation and putting into operation of the VLTI at Paranal is a gradual process that will take several years. While the present "First Fringe" event is of crucial importance, the full potential of the VLTI will only be reached some years from now. This will happen with the successive installation of a number of highly specialised instruments, like the near-infrared/red VLTI focal instrument (AMBER) , the Mid-Infrared interferometric instrument for the VLTI (MIDI) and the instrument for Phase-Referenced Imaging and Microarcsecond Astrometry (PRIMA). Already next year, the three 1.8-m Auxiliary Telescopes that will be fully devoted to interferometric observations, will arrive at Paranal. Ultimately, it will be possible to combine the light beams from all the large and small telescopes. Great research promises Together, they will be able to achieve an unprecedented image sharpness (angular resolution) in the optical/infrared wavelength region, and thanks to the great light-collecting ability of the VLT Unit Telescopes, also for observations of quite faint objects. This will make it possible to carry out many different front-line scientific studies, beyond the reach of other instruments. There are many promising research fields that will profit from VLTI observations, of which the following serve as particularly interesting examples: * The structure and composition of the outer solar system, by studies of individual moons, Trans-Neptunian Objects and comets. * The direct detection and imaging of exoplanets in orbit around other stars. * The formation of star clusters and their evolution, from images and spectra of very young objects. * Direct views of the surface structures of stars other than the Sun. * Measuring accurate distances to the most prominent "stepping stones" in the extragalactic distance scale, e.g., galactic Cepheid stars, the Large Magellanic Cloud and globular clusters. * Direct investigations of the physical mechanisms responsible for stellar pulsation, mass loss and dust formation in stellar envelopes and evolution to the Planetary Nebula and White Dwarf stages. * Close-up studies of interacting binary stars to better understand their mass transfer mechanisms and evolution. * Studies of the structure of the circum-stellar environment of stellar black holes and neutron stars. * The evolution of the expanding shells of unstable stars like novae and supernovae and their interaction with the interstellar medium. * Studying the structure and evolution of stellar and galactic nuclear accretion disks and the associated features, e.g., jets and dust tori. * With images and spectra of the innermost regions of the Milky Way galaxy, to investigate the nature of the nucleus surrounding the central black hole. Clearly, there will be no lack of opportunities for trailblazing research with the VLTI. The "First Fringes" constitute a very important milestone in this direction. Appendix A: How does it work? ESO PR Photo 10d/01 ESO PR Photo 10d/01 [Preview - JPEG: 400 x 290 pix - 24k] [Normal - JPEG: 800 x 579 pix - 68k] [Hi-Res - JPEG: 3000 x 2170 pix - 412k] ESO PR Photo 10e/01 ESO PR Photo 10e/01 [Preview - JPEG: 400 x 219 pix - 32k] [Normal - JPEG: 800 x 438 pix - 64k] [Hi-Res - JPEG: 3000 x 1644 pix - 336k] Caption : PR Photo 10d/01 demonstrates in a schematic way, how the images of two stars of different angular size (left) will look like, with a single telescope (middle) and with an interferometer like the VLTI (right). Whereas there is little difference with one telescope, the fringe patterns at the interferometer are quite different. Conversely, the appearance of this pattern provides a measure of the star's angular diameter. In PR Photo 10e/01 , interferometric observations of a single star are shown, as the distance between the two telescopes is gradually increased. The observed pattern at the focal plane clearly changes, and the "fringes" disappear completely. See the text for more details. The principle behind interferometry is the "coherent optical interference" of light beams from two or more telescopes, due to the wave nature of light. The above illustrations serve to explain what the astronomers observe in the simplest case, that of a single star with a certain angular size, and how this can be translated into a measurement of this size. In PR Photo 10d/01 , the difference between two stars of different diameter is illustrated. While the image of the smaller star displays strong interference effects (i.e., a well visible fringe pattern), those of the larger star are much less prominent. The "visibility" of the fringes is therefore a direct measure of the size; the stronger they appear (the "larger the contrast"), the smaller is the star. If the distance between the two telescopes is increased when a particular star is observed ( PR Photo 10e/01 ), then the fringes become less and less prominent. At a certain distance, the fringe pattern disppears completely. This distance is directly related to the angular size of the star. Appendix B: Elements of the VLT Interferometer Contrary to other large astronomical telescopes, the VLT was designed from the beginning with the use of interferometry as a major goal . For this reason, the four 8.2-m Unit Telescopes were positioned in a quasi-trapezoidal configuration and several moving 1.8-m telescopes were included into the overall VLT concept, cf. PR Photo 10f/01 . The photos below show some of the key elements of the VLT Interferometer during the present observations. They include the siderostats , 40-cm telescopes that serve to capture the light from a comparatively bright star ( Photos 10g-i/01 ), the Delay Lines ( Photo 10j/01 ), and the VINCI instrument ( Photo 10k/01) Earlier information about the development and construction of the individual elements of the VLTI is available as ESO PR 04/98 , ESO PR 14/00 and ESO PR Photos 26a-e/00.

Web surveillance system using platform-based design

NASA Astrophysics Data System (ADS)

Lin, Shin-Yo; Tsai, Tsung-Han

2004-04-01

A revolutionary methodology of SOPC platform-based design environment for multimedia communications will be developed. We embed a softcore processor to perform the image compression in FPGA. Then, we plug-in an Ethernet daughter board in the SOPC development platform system. Afterward, a web surveillance platform system is presented. The web surveillance system consists of three parts: image capture, web server and JPEG compression. In this architecture, user can control the surveillance system by remote. By the IP address configures to Ethernet daughter board, the user can access the surveillance system via browser. When user access the surveillance system, the CMOS sensor presently capture the remote image. After that, it will feed the captured image with the embedded processor. The embedded processor immediately performs the JPEG compression. Afterward, the user receives the compressed data via Ethernet. To sum up of the above mentioned, the all system will be implemented on APEX20K200E484-2X device.

Novel approach to multispectral image compression on the Internet

NASA Astrophysics Data System (ADS)

Zhu, Yanqiu; Jin, Jesse S.

2000-10-01

Still image coding techniques such as JPEG have been always applied onto intra-plane images. Coding fidelity is always utilized in measuring the performance of intra-plane coding methods. In many imaging applications, it is more and more necessary to deal with multi-spectral images, such as the color images. In this paper, a novel approach to multi-spectral image compression is proposed by using transformations among planes for further compression of spectral planes. Moreover, a mechanism of introducing human visual system to the transformation is provided for exploiting the psycho visual redundancy. The new technique for multi-spectral image compression, which is designed to be compatible with the JPEG standard, is demonstrated on extracting correlation among planes based on human visual system. A high measure of compactness in the data representation and compression can be seen with the power of the scheme taken into account.

Privacy enabling technology for video surveillance

NASA Astrophysics Data System (ADS)

Dufaux, Frédéric; Ouaret, Mourad; Abdeljaoued, Yousri; Navarro, Alfonso; Vergnenègre, Fabrice; Ebrahimi, Touradj

2006-05-01

In this paper, we address the problem privacy in video surveillance. We propose an efficient solution based on transformdomain scrambling of regions of interest in a video sequence. More specifically, the sign of selected transform coefficients is flipped during encoding. We address more specifically the case of Motion JPEG 2000. Simulation results show that the technique can be successfully applied to conceal information in regions of interest in the scene while providing with a good level of security. Furthermore, the scrambling is flexible and allows adjusting the amount of distortion introduced. This is achieved with a small impact on coding performance and negligible computational complexity increase. In the proposed video surveillance system, heterogeneous clients can remotely access the system through the Internet or 2G/3G mobile phone network. Thanks to the inherently scalable Motion JPEG 2000 codestream, the server is able to adapt the resolution and bandwidth of the delivered video depending on the usage environment of the client.

Multiple descriptions based on multirate coding for JPEG 2000 and H.264/AVC.

PubMed

Tillo, Tammam; Baccaglini, Enrico; Olmo, Gabriella

2010-07-01

Multiple description coding (MDC) makes use of redundant representations of multimedia data to achieve resiliency. Descriptions should be generated so that the quality obtained when decoding a subset of them only depends on their number and not on the particular received subset. In this paper, we propose a method based on the principle of encoding the source at several rates, and properly blending the data encoded at different rates to generate the descriptions. The aim is to achieve efficient redundancy exploitation, and easy adaptation to different network scenarios by means of fine tuning of the encoder parameters. We apply this principle to both JPEG 2000 images and H.264/AVC video data. We consider as the reference scenario the distribution of contents on application-layer overlays with multiple-tree topology. The experimental results reveal that our method favorably compares with state-of-art MDC techniques.

First Digit Law and Its Application to Digital Forensics

NASA Astrophysics Data System (ADS)

Shi, Yun Q.

Digital data forensics, which gathers evidence of data composition, origin, and history, is crucial in our digital world. Although this new research field is still in its infancy stage, it has started to attract increasing attention from the multimedia-security research community. This lecture addresses the first digit law and its applications to digital forensics. First, the Benford and generalized Benford laws, referred to as first digit law, are introduced. Then, the application of first digit law to detection of JPEG compression history for a given BMP image and detection of double JPEG compressions are presented. Finally, applying first digit law to detection of double MPEG video compressions is discussed. It is expected that the first digit law may play an active role in other task of digital forensics. The lesson learned is that statistical models play an important role in digital forensics and for a specific forensic task different models may provide different performance.

First Results from the UT1 Science Verification Programme

NASA Astrophysics Data System (ADS)

1998-11-01

Performance verification is a step which has regularly been employed in space missions to assess and qualify the scientific capabilities of an instrument. Within this framework, it was the goal of the Science Verification program to submit the VLT Unit Telescope No. 1 (UT1) to the scrutiny that can only be achieved in an actual attempt to produce scientifically valuable results. To this end, an attractive and diversified set of observations were planned in advance to be executed at the VLT. These Science Verification observations at VLT UT1 took place as planned in the period from August 17 to September 1, 1998, cf. the September issue of the ESO Messenger ( No. 93, p. 1 ) and ESO PR 12/98 for all details. Although the meteorological conditions on Paranal were definitely below average, the telescope worked with spectacular efficiency and performance throughout the entire period, and very valuable data were gathered. After completion of all observations, the Science Verification Team started to prepare all of the datasets for the public release that took place on October 2, 1998. The data related to the Hubble Deep Field South (now extensively observed by the Hubble Space Telescope) were made public world-wide, while the release of other data was restricted to ESO member states. With this public release ESO intended to achieve two specific goals: offer to the scientific community an early opportunity to work on valuable VLT data, and in the meantime submit the VLT to the widest possible scrutiny. With the public release, many scientists started to analyse scientifically the VLT data, and the following few examples of research programmes are meant to give a sample of the work that has been carried out on the Science Verification data during the past two months. They represent typical investigations that will be carried out in the future with the VLT. Many of these will be directed towards the distant universe, in order to gather insight on the formation and evolution of galaxies, galaxy clusters, and large scale structure. Others will concentrate on more nearby objects, including stars and nebulae in the Milky Way galaxy, and some will attempt to study our own solar system. The following six research programmes were presented at the Press Conference that took place at the ESO Headquarters in Garching (Germany) today. Deep Galaxy Counts and Photometric Redshifts in the HDF-S NIC3 Field The goal of this programme was to verify the capability of the VLT by obtaining the deepest possible ground-based images and using multicolour information to derive the redshifts (and hence the distances) of the faintest galaxies. The space distribution, luminosity and colour of these extreme objects may provide crucial information on the initial phases of the evolution of the universe. The method is known as photometric redshift determination . The VLT Test Camera was used to collect CCD images for a total of 16.6 hours in five spectral filters (U, B, V, R and I) in the so-called HDF-S NIC3 field. This is a small area (about 1 arcmin square) of the southern sky where very deep observations in the infrared bands J, H and K (1.1, 1.6 and 2.2µm, respectively) have been obtained by the Hubble Space Telescope (HST). The observations were combined and analyzed by a team of astronomers at ESO and the Observatory of Rome (Italy). Galaxies were detected in the field down to magnitude ~ 27-28. In most colours, the planned limiting values of the fluxes were successfully reached. ESO PR Photo 48a/98 ESO PR Photo 48a/98 [Preview - JPEG: 800 x 856 pix - 144k] [High-Res - JPEG: 3000 x 3210 pix - 728k] PR Photo 48a/98 shows some examples of photometric redshift determination for faint galaxies in the HDF-S NIC3 field. The filled points are the fluxes measured in the five colors observed with the VLT Test Camera (U, B, V, R and I) and in the infrared H spectral band with the NICMOS instrument on the Hubble Space Telescope. The curves constitute the best fit to the points obtained from a library of more than 400,000 synthetic spectra of galaxies at various redshifts (Fontana et al., in preparation). For most of these very faint sources, it is not possible to collect enough photons to measure the recession velocity (the redshift) by spectroscopy, even with an 8-m telescope. The redshifts and the main galaxy properties are then determined by comparing the colour observations with synthetic spectra (see PR Photo 48a/98 ). This has been done for more than one hundred galaxies in the field brighter than magnitude 26.5. Around 20 are found to be at redshifts larger than 2. The brighter ones are excellent candidates for future detailed studies with the UT1 instruments FORS1 and ISAAC. The scientists involved in this study are: Sandro D'Odorico, Richard Hook, Alvio Renzini, Piero Rosati, Rodolfo Viezzer (ESO) and Adriano Fontana, Emanuele Giallongo, Francesco Poli (Rome Observatory, Italy). A Gravitational Einstein Ring Because the gravitational pull of matter bends the path of light rays, astronomical objects - stars, galaxies and galaxy clusters - can act like lenses, which magnify and severely distort the images of galaxies behind them, producing weird pictures as in a hall of mirrors. In the most extreme case, where the foreground lensing galaxy and the background galaxy are perfectly lined up, the image of the background galaxy is stretched into a ring. Such an image is known as an Einstein ring , because the correct formula for the bending of light was first described by the famous phycisist Albert Einstein . ESO PR Photo 48b/98 ESO PR Photo 48b/98 [Preview - JPEG: 800 x 1106 pix - 952k] [High-Res - JPEG: 3000 x 4148 pix - 5.4Mb] ESO PR Photo 48c/98 ESO PR Photo 48c/98 [Preview - JPEG: 800 x 977 pix - 272k] [High-Res - JPEG: 3000 x 3664 pix - 1.4Mb] PR Photo 48b/98 (left) shows a new, true colour image of an Einstein ring (upper centre of photo), first discovered at ESO in 1995. The ring, which is the stretched image of a galaxy far out in the Universe, stands out clearly in green, and the red galaxy inside the ring is the lens. The discovery image was very faint, but this new picture, taken with the VLT during the Science Verification Programme allows a much clearer view of the ring because of the great light-gathering capacity of the telescope and, not least, because of the superb image quality. In Photo 48c/98 (right), four images illustrate the deduced model of the lensing effect. In the upper left, the observed ring has been enlarged and the image of the lensing galaxy removed by image processing. Below it is a model of the gravitational field (potential) around this galaxy along with the "true" image of the background galaxy shown. At the lower right is the resulting gravitationally magnified and distorted image of the background galaxy, which to the upper right has been de-sharpened to the same image quality as the observed image. The similarity between the two is most convincing. The picture shows a new, true colour image of an Einstein ring, first discovered at ESO in 1995. The ring, which is the stretched image of a galaxy far out in the Universe, stands out clearly in green, and the red galaxy inside the ring is the lens. The discovery image was very faint, but this new picture, taken with the VLT during the Science Verification Programme allows a much clearer view of the ring because of the great light-gathering capacity the telescope and, not least, because of the superb image quality. Gravitational lensing provides a very useful tool with which to study the Universe. As "weighing scales", it provides a measure of the mass within the lensing body, and as a "magnifying glass", it allows us to see details in objects which would otherwise be beyond the reach of current telescopes. This new detailed picture has allowed a much more accurate measurement of the mass of the lensing galaxy, revealing the presence of vast quantities of "unseen" matter, five times more than if just the light from the galaxy is taken into account. This additional material represents some of the Universe's dark matter . The gravitational lens action is also magnifying the background object by a factor of ten, providing an unparalleled view of this very distant galaxy which is in a stage of active star-formation. The scientists involved in this study are : Palle Møller (ESO), Stephen J. Warren (Blackett Laboratory, Imperial College, UK), Paul C. Hewett (Institute of Astronomy, Cambridge, UK) and Geraint F. Lewis (Dept. of Physics and Astronomy, University of Victoria, Canada). An Extremely Red Galaxy One of the main goals of modern cosmology is to understand when and how the galaxies formed. In the very last years, many high-redshift (i.e. very distant) galaxies have been found, suggesting that some galaxies were already assembled, when the Universe was much younger than now. None of these high-redshift galaxies have ever been found to be a bona-fide red elliptical galaxy . The VLT, however, with its very good capabilities for infrared observations, is an ideal instrument to investigate when and how the red elliptical galaxies formed. The VLT Science Verification images have provided unique multicolour information about an extremely red galaxy that was originally (Treu et al., 1998, A&A Letters, Vol. 340, p. 10) identified on the Hubble Deep Field South (HDF-S) Test Image. This galaxy is shown in PR Photo 48d/98 that is an enlargment from ESO PR Photo 35b/98. It was detected on Near-IR images and also on images obtained in the optical part of the spectrum, at the very faint limit of magnitude B ~ 29 in the blue. However, this galaxy has not been detected in the near-ultraviolet band. ESO PR Photo 48d/98 ESO PR Photo 48d/98 [Preview - JPEG: 800 x 594 pix - 264k] [High-Res - JPEG: 3000 x 2229 pix - 1.8Mb] ESO PR Photo 48e/98 ESO PR Photo 48e/98 [Preview - JPEG: 800 x 942 pix - 96k] [High-Res - JPEG: 3000 x 3533 pix - 576k] PR Photo 48d/98 (left) shows the very red galaxy (at the arrow) in the Hubble Deep Field South , discussed here. Photo 48e/98 (right) is the spectrum of a typical elliptical galaxy, redshifted to z = 1.8 and compared with the brightness of the galaxy in different wavebands (crosses), as measured during the VLT SV programme and the Hubble Deep Field South Test Program (the cross to the right). The arrow indicates the upper limit by the VLT SV in the ultraviolet band. It can be seen that these observations are fully consistent with the object being an old, elliptical galaxy at the high redshift of z=1.8 , i.e. at an epoch, when the Universe was much younger than now. The new ISAAC instrument at VLT UT1 will be able to obtain an infrared spectrum of this galaxy and thus to affirm or refute this provisional conclusion. The colours measured at the VLT and on the HST Test Image are very well matched by those of an old elliptical galaxy at redshift z ~ 1.8 ; see Photo 48e/98 . All the available evidence is thus consistent with this object being an elliptical galaxy with the highest-known redshift for this galaxy type. A preliminary analysis of Hubble Deep Field South data, just released, seems to support this hypothesis. If these conclusions are confirmed by direct measurement of its spectrum, this galaxy must already have been "old" (i.e. significantly evolved) when the Universe had an age of only about one fifth of its present value. A spectroscopic confirmation is still outstanding, but is now possible with the ISAAC instrument at VLT UT1. A positive result would demonstrate that elliptical galaxies can form very early in the history of the Universe. The scientists involved in this study are: Massimo Stiavelli, Tommaso Treu (also Scuola Normale Superiore, Italy), Stefano Casertano, Mark Dickinson, Henry Ferguson, Andrew Fruchter, Crystal Martin (STSci, Baltimore, USA), Piero Rosati and Rodolfo Viezzer (ESO), Marcella Carollo (Johns Hopkins University, Baltimore, USA) and Henry Tieplitz (NASA, Goddard Space Flight Center, Greenbelt, USA). Lyman-alpha Companions and Extended Nebulosity around a Quasar at Redshift z=2.2 In current theories of galaxy formation, luminous galaxies we see to-day were built up through repeated merging of smaller protogalactic clumps. Quasars, prodigious sources pouring out 100 to 1000 times as much light as an entire galaxy, have been used as markers of galaxy formation activity and have guided astronomers in their hunting of primeval galaxies and large-scale structures at high redshift. A supermassive black-hole, swallowing stars, gas and dust, is thought to be the engine powering a quasar and the interaction of the galaxy hosting the black-hole with neighboring galaxies is expected to play a key role in "feeding the monster". At intermediate redshift, a large fraction of radio-loud quasars and radio galaxies inhabit rich clusters of galaxies, whereas radio-quiet quasars are rarely found in very rich environments. Furthermore, tidal interaction between quasars and their nearby companions is also the favoured explanation for the presence of large gaseous nebulosities associated with radio-loud quasars and radio galaxies. At high redshift, searches for Lyman-alpha quasar companions and emission-line nebulosities show strong similarities with those seen at lower redshift, although the detection rate is lower. ESO PR Photo 48f/98 ESO PR Photo 48f/98 [Preview - JPEG: 800 x 977 pix - 184k] [High-Res - JPEG: 3000 x 3662 pix - 1.1Mb] ESO PR Photo 48g/98 ESO PR Photo 48g/98 [Preview - JPEG: 800 x 966 pix - 328k] [High-Res - JPEG: 3000 x 3621 pix - 1.8Mb] PR Photo 48f/98 (left) is a false-colour reproduction of a B-band image of the field around the radio-weak quasar J2233-606 in the Hubble Deep Field South (HDF-S) . Photo 48g/98 (right) represents emission from the same direction at a wavelength that corresponds to Lyman-alpha emission at the redshift ( z = 2.2 ) of the quasar. Three Lyman-alpha candidate companions are indicated with arrows. Note also the extended nebulosity around the quasar. A search for Lyman-alpha companions to the radio-weak quasar J2233-606 in the Hubble Deep Field South (HDF-S) was conducted during the VLT UT1 SV programme in a small field of 1.2 x 1.3 arcmin 2 , centered on the quasar. Candidate Lyman-alpha companions were identified by subtracting a broad-band B (blue) image, that traces the galaxy stellar populations, from a narrow-band image, spectrally centered on the redshifted, narrow Lyman-alpha emission line of the quasar ( z = 2.2 ). Three Lyman-alpha candidate companions were discovered at angular distances of 15 to 23 arcsec, or 200 to 300 kpc (650,000 to 1,000,000 light-years) at the distance corresponding to the quasar redshift. The emission lines are very strong, relative to the continuum emission of the galaxies - this could be a consequence of the strong ionizing radiation field of the quasar. These companions to the quasar may trace a large-scale structure which would extend over larger distances beyond the observed, small field. Even more striking is the presence of a very extended nebulosity whose size (120 kpc x 160 kpc) and Lyman-alpha luminosity (3 x 10 44 erg/cm 2 /s) are among the largest observed around radio galaxies and radio-loud quasars, but rarely seen around a radio-weak quasar. Tidal interaction between the northern, very nearby companion and the quasar is clearly present: the companion is embedded in the quasar nebulosity, most of its gas has been stripped and lies in a tail westwards of the galaxy. The scientists involved in this study are: Jacqueline Bergeron (ESO), Stefano Cristiani, Stephane Arnouts, Gianni Fasano (Padova, Italy) and Patrick Petitjean (Institut d'Astrophysique, Paris, France). Very Distant Galaxy Clusters During the past years, it has become possible to detect and subsequently study progressively more distant clusters of galaxies. For this research programme, UT1 Science Verification data were used, in combination with data obtained with the SOFI instrument at the ESO New Technology Telescope (NTT) at La Silla, to confirm the existence of two very distant galaxy clusters at redshift z ~ 1 , that had originally been detected in the ESO Imaging Survey. This redshift corresponds to an epoch when the age of the Universe was only two-thirds of the present. ESO PR Photo 48h/98 ESO PR Photo 48h/98 [Preview - JPEG: 800 x 917 pix - 896k] [High-Res - JPEG: 3000 x 3438 pix - 6.0Mb] PR Photo 48h/98 (left) is a colour composite that shows the now confirmed cluster EIS0046-2930 . The image has been produced by combining the V (green-yellow), R (red) and I (Near-IR) exposures with the Test Camera obtained during the VLT-UT1 Science Verification. The yellow-orange galaxies are the cluster members and the bluer objects are galaxies belonging to the general field population. The cluster center is at the location of the largest (yellow-orange) cluster galaxy to the left of the center of the image. The field measures 90 x 90 arcsec. This was achieved by the detection of a spatial excess density of galaxies, with measured colour equal to that of elliptical galaxies at this redshift, as established by counts in the respective sky areas. The field of one these clusters is shown in PR Photo 48h/98 . These new data show that the VLT will most certainly play a major role in the studies of the cluster galaxy population in such distant systems. This will contribute to shed important new light on the evolution of galaxies. Furthermore, the VLT clearly has the potential to identify and confirm the reality of many more such clusters and thereby to increase considerably the number of known objects. This will be important in order to determine more accurate values of the basic cosmological constants, and thus for our understanding of the evolution of the Universe as a whole. The presentation was made by Lisbeth Fogh Olsen (Copenhagen Observatory, Denmark, and ESO) on behalf of the scientists involved in this study. Icy Planets in the Outer Solar System Observations with large optical telescopes during the past years have begun to cast more light on the still very little known, distant icy planets in the outer solar system. Until November 1998, about 70 of these have been discovered outside the orbit of Neptune (between 30 and 50 AU, or 4,500 to 7,500 million km, from the Sun). They are accordingly referred to as Trans-Neptunian Objects (TNOs) . Those found so far are believed to represent the "tip of the iceberg" of a large population of such objects belonging to the so-called Kuiper Belt . This is a roughly disk-shaped region between about 50 and 120 AU (about 7,500 to 18,000 million km) from the Sun, in which remnant bodies from the formation of the solar system are thought to be present. From their measured brightness and the distance, it is found that most known TNOs have diameters of the order of a few hundred kilometres. About half of those known move in elongated Pluto-like orbits, the others move somewhat further out in stable, circular orbits. During the two-week Science Verification programme, approximately 200 minutes were spent on a small observing programme aimed at obtaining images of some TNOs in different wavebands (B, V, R and I). Since this programme was primarily designed as a back-up to be executed during less favourable atmospheric conditions, some of the observations could not be used. However, images of three faint TNOs were recorded during an excellent series of 1-10 min exposures. From these data, it was possible to measure quite accurate magnitudes (and thus approximate sizes) and to determine their colours. One of them, 1996 TL66, was among the bluest TNOs ever observed. It is believed that this is because its surface has undergone recent transformation, possibly due to collisions with other objects or the breaking-off of small pieces from the surface, in both cases revealing "fresh" layers below. The combination of all available exposures made it possible to look for faint and tenous atmospheres around these TNOs, but none were found. These results show that it is possible, with little effort and even under quite unfavourable observing conditions, to obtain valuable information with the VLT about icy objects in the outer solar system. Of even greater interest will be future spectroscopic observations with FORS and ISAAC that will allow to study the surface composition in some detail, with the potential of providing direct information about (nearly?) pristine material from the early phases of the solar system. The scientists involved in this study are: Olivier Hainaut, Hermann Boehnhardt, Catherine Delahodde and Richard West (ESO) and Karen Meech (Institute of Astronomy, Hawaii, USA). How to obtain ESO Press Information ESO Press Information is made available on the World-Wide Web (URL: http://www.eso.org ). ESO Press Photos may be reproduced, if credit is given to the European Southern Observatory.

Sharper and Deeper Views with MACAO-VLTI

NASA Astrophysics Data System (ADS)

2003-05-01

"First Light" with Powerful Adaptive Optics System for the VLT Interferometer Summary On April 18, 2003, a team of engineers from ESO celebrated the successful accomplishment of "First Light" for the MACAO-VLTI Adaptive Optics facility on the Very Large Telescope (VLT) at the Paranal Observatory (Chile). This is the second Adaptive Optics (AO) system put into operation at this observatory, following the NACO facility ( ESO PR 25/01 ). The achievable image sharpness of a ground-based telescope is normally limited by the effect of atmospheric turbulence. However, with Adaptive Optics (AO) techniques, this major drawback can be overcome so that the telescope produces images that are as sharp as theoretically possible, i.e., as if they were taken from space. The acronym "MACAO" stands for "Multi Application Curvature Adaptive Optics" which refers to the particular way optical corrections are made which "eliminate" the blurring effect of atmospheric turbulence. The MACAO-VLTI facility was developed at ESO. It is a highly complex system of which four, one for each 8.2-m VLT Unit Telescope, will be installed below the telescopes (in the Coudé rooms). These systems correct the distortions of the light beams from the large telescopes (induced by the atmospheric turbulence) before they are directed towards the common focus at the VLT Interferometer (VLTI). The installation of the four MACAO-VLTI units of which the first one is now in place, will amount to nothing less than a revolution in VLT interferometry . An enormous gain in efficiency will result, because of the associated 100-fold gain in sensitivity of the VLTI. Put in simple words, with MACAO-VLTI it will become possible to observe celestial objects 100 times fainter than now . Soon the astronomers will be thus able to obtain interference fringes with the VLTI ( ESO PR 23/01 ) of a large number of objects hitherto out of reach with this powerful observing technique, e.g. external galaxies. The ensuing high-resolution images and spectra will open entirely new perspectives in extragalactic research and also in the studies of many faint objects in our own galaxy, the Milky Way. During the present period, the first of the four MACAO-VLTI facilties was installed, integrated and tested by means of a series of observations. For these tests, an infrared camera was specially developed which allowed a detailed evaluation of the performance. It also provided some first, spectacular views of various celestial objects, some of which are shown here. PR Photo 12a/03 : View of the first MACAO-VLTI facility at Paranal PR Photo 12b/03 : The star HIC 59206 (uncorrected image). PR Photo 12c/03 : HIC 59206 (AO corrected image) PR Photo 12e/03 : HIC 69495 (AO corrected image) PR Photo 12f/03 : 3-D plot of HIC 69495 images (without and with AO correction) PR Photo 12g/03 : 3-D plot of the artificially dimmed star HIC 74324 (without and with AO correction) PR Photo 12d/03 : The MACAO-VLTI commissioning team at "First Light" PR Photo 12h/03 : K-band image of the Galactic Center PR Photo 12i/03 : K-band image of the unstable star Eta Carinae PR Photo 12j/03 : K-band image of the peculiar star Frosty Leo MACAO - the Multi Application Curvature Adaptive Optics facility ESO PR Photo 12a/03 ESO PR Photo 12a/03 [Preview - JPEG: 408 x 400 pix - 56k [Normal - JPEG: 815 x 800 pix - 720k] Captions : PR Photo 12a/03 is a front view of the first MACAO-VLTI unit, now installed at the 8.2-m VLT KUEYEN telescope. Adaptive Optics (AO) systems work by means of a computer-controlled deformable mirror (DM) that counteracts the image distortion induced by atmospheric turbulence. It is based on real-time optical corrections computed from image data obtained by a "wavefront sensor" (a special camera) at very high speed, many hundreds of times each second. The ESO Multi Application Curvature Adaptive Optics (MACAO) system uses a 60-element bimorph deformable mirror (DM) and a 60-element curvature wavefront sensor, with a "heartbeat" of 350 Hz (times per second). With this high spatial and temporal correcting power, MACAO is able to nearly restore the theoretically possible ("diffraction-limited") image quality of an 8.2-m VLT Unit Telescope in the near-infrared region of the spectrum, at a wavelength of about 2 µm. The resulting image resolution (sharpness) of the order of 60 milli-arcsec is an improvement by more than a factor of 10 as compared to standard seeing-limited observations. Without the benefit of the AO technique, such image sharpness could only be obtained if the telescope were placed above the Earth's atmosphere. The technical development of MACAO-VLTI in its present form was begun in 1999 and with project reviews at 6 months' intervals, the project quickly reached cruising speed. The effective design is the result of a very fruitful collaboration between the AO department at ESO and European industry which contributed with the diligent fabrication of numerous high-tech components, including the bimorph DM with 60 actuators, a fast-reaction tip-tilt mount and many others. The assembly, tests and performance-tuning of this complex real-time system was assumed by ESO-Garching staff. Installation at Paranal The first crates of the 60+ cubic-meter shipment with MACAO components arrived at the Paranal Observatory on March 12, 2003. Shortly thereafter, ESO engineers and technicians began the painstaking assembly of this complex instrument, below the VLT 8.2-m KUEYEN telescope (formerly UT2). They followed a carefully planned scheme, involving installation of the electronics, water cooling systems, mechanical and optical components. At the end, they performed the demanding optical alignment, delivering a fully assembled instrument one week before the planned first test observations. This extra week provided a very welcome and useful opportunity to perform a multitude of tests and calibrations in preparation of the actual observations. AO to the service of Interferometry The VLT Interferometer (VLTI) combines starlight captured by two or more 8.2- VLT Unit Telescopes (later also from four moveable1.8-m Auxiliary Telescopes) and allows to vastly increase the image resolution. The light beams from the telescopes are brought together "in phase" (coherently). Starting out at the primary mirrors, they undergo numerous reflections along their different paths over total distances of several hundred meters before they reach the interferometric Laboratory where they are combined to within a fraction of a wavelength, i.e., within nanometers! The gain by the interferometric technique is enormous - combining the light beams from two telescopes separated by 100 metres allows observation of details which could otherwise only be resolved by a single telescope with a diameter of 100 metres. Sophisticated data reduction is necessary to interpret interferometric measurements and to deduce important physical parameters of the observed objects like the diameters of stars, etc., cf. ESO PR 22/02 . The VLTI measures the degree of coherence of the combined beams as expressed by the contrast of the observed interferometric fringe pattern. The higher the degree of coherence between the individual beams, the stronger is the measured signal. By removing wavefront aberrations introduced by atmospheric turbulence, the MACAO-VLTI systems enormously increase the efficiency of combining the individual telescope beams. In the interferometric measurement process, the starlight must be injected into optical fibers which are extremely small in order to accomplish their function; only 6 µm (0.006 mm) in diameter. Without the "refocussing" action of MACAO, only a tiny fraction of the starlight captured by the telescopes can be injected into the fibers and the VLTI would not be working at the peak of efficiency for which it has been designed. MACAO-VLTI will now allow a gain of a factor 100 in the injected light flux - this will be tested in detail when two VLT Unit Telescopes, both equipped with MACAO-VLTI's, work together. However, the very good performance actually achieved with the first system makes the engineers very confident that a gain of this order will indeed be reached. This ultimate test will be performed as soon as the second MACAO-VLTI system has been installed later this year. MACAO-VLTI First Light After one month of installation work and following tests by means of an artificial light source installed in the Nasmyth focus of KUEYEN, MACAO-VLTI had "First Light" on April 18 when it received "real" light from several astronomical obejcts. During the preceding performance tests to measure the image improvement (sharpness, light energy concentration) in near-infrared spectral bands at 1.2, 1.6 and 2.2 µm, MACAO-VLTI was checked by means of a custom-made Infrared Test Camera developed for this purpose by ESO. This intermediate test was required to ensure the proper functioning of MACAO before it is used to feed a corrected beam of light into the VLTI. After only a few nights of testing and optimizing of the various functions and operational parameters, MACAO-VLTI was ready to be used for astronomical observations. The images below were taken under average seeing conditions and illustrate the improvement of the image quality when using MACAO-VLTI . MACAO-VLTI - First Images Here are some of the first images obtained with the test camera at the first MACAO-VLTI system, now installed at the 8.2-m VLT KUEYEN telescope. ESO PR Photo 12b/03 ESO PR Photo 12b/03 [Preview - JPEG: 400 x 468 pix - 25k [Normal - JPEG: 800 x 938 pix - 291k] ESO PR Photo 12c/03 ESO PR Photo 12c/03 [Preview - JPEG: 400 x 469 pix - 14k [Normal - JPEG: 800 x 938 pix - 135k] Captions : PR Photos 12b-c/03 show the first image, obtained by the first MACAO-VLTI system at the 8.2-m VLT KUEYEN telescope in the infrared K-band (wavelength 2.2 µm). It displays images of the star HIC 59206 (visual magnitude 10) obtained before (left; Photo 12b/03 ) and after (right; Photo 12c/03 ) the adaptive optics system was switched on. The binary is separated by 0.120 arcsec and the image was taken under medium seeing conditions (0.75 arcsec) seeing. The dramatic improvement in image quality is obvious. ESO PR Photo 12d/03 ESO PR Photo 12d/03 [Preview - JPEG: 400 x 427 pix - 18k [Normal - JPEG: 800 x 854 pix - 205k] ESO PR Photo 12e/03 ESO PR Photo 12e/03 [Preview - JPEG: 483 x 400 pix - 17k [Normal - JPEG: 966 x 800 pix - 169k] Captions : PR Photo 12d/03 shows one of the best images obtained with MACAO-VLTI (logarithmic intensity scale). The seeing was 0.8 arcsec at the time of the observations and three diffraction rings can clearly be seen around the star HIC 69495 of visual magnitude 9.9. This pattern is only well visible when the image resolution is very close to the theoretical limit. The exposure of the point-like source lasted 100 seconds through a narrow K-band filter. It has a Strehl ratio (a measure of light concentration) of about 55% and a Full-Width- Half-Maximum (FWHM) of 0.060 arcsec. The 3-D plot ( PRPhoto 12e/03 ) demonstrates the tremendous gain in peak intensity of the AO image (right) in peak intensity as compared to "open-loop" image (the "noise" to the left) obtained without the benefit of AO. ESO PR Photo 12f/03 ESO PR Photo 12f/03 [Preview - JPEG: 494 x 400 pix - 20k [Normal - JPEG: 988 x 800 pix - 204k] Caption : PR Photo 12f/03 demonstrates the correction performance of MACAO-VLTI when using a faint guide star. The observed star ( HIC 74324 (stellar spectral type G0 and visual magnitude 9.4) was artificially dimmed by a neutral optical filter to visual magnitude 16.5. The observation was carried out in 0.55 arcsec seeing and with a rather short atmospheric correlation time of 3 milliseconds at visible wavelengths. The Strehl ratio in the 25-second K-band exposure is about 10% and the FWHM is 0.14 arcseconds. The uncorrected image is shown to the left for comparison. The improvement is again impressive, even for a star as faint as this, indicating that guide stars of this magnitude are feasible during future observations. ESO PR Photo 12g/03 ESO PR Photo 12g/03 [Preview - JPEG: 528 x 400 pix - 48k [Normal - JPEG: 1055 x 800 pix - 542k] Captions : PR Photo 12g/03 shows some of the MACAO-VLTI commissioning team members in the VLT Control Room at the moment of "First Light" during the night between April 18-19, 2003. Sitting: Markus Kasper, Enrico Fedrigo - Standing: Robin Arsenault, Sebastien Tordo, Christophe Dupuy, Toomas Erm, Jason Spyromilio, Rob Donaldson (all from ESO). PR Photos 12b-c/03 show the first image in the infrared K-band (wavelength 2.2 µm) of a star (visual magnitude 10) obtained without and with image corrections by means of adaptive optics. PR Photo 12d/03 displays one of the best images obtained with MACAO-VLTI during the early tests. It shows a Strehl ratio (measure of light concentration) that fulfills the specifications according to which MACAO-VLTI was built. This enormous improvement when using AO techniques is clearly demonstrated in PR Photo 12e/03 , with the uncorrected image profile (left) hardly visible when compared to the corrected profile (right). PR Photo 11f/03 demonstrates the correction capabilities of MACAO-VLTI when using a faint guide star. Tests using different spectral types showed that the limiting visual magnitude varies between 16 for early-type B-stars and about 18 for late-type M-stars. Astronomical Objects seen at the Diffraction Limit The following examples of MACAO-VLTI observations of two well-known astronomical objects were obtained in order to provisionally evaluate the research opportunities now opening with MACAO-VLTI. They may well be compared with space-based images. The Galactic Center ESO PR Photo 12h/03 ESO PR Photo 12h/03 [Preview - JPEG: 693 x 400 pix - 46k [Normal - JPEG: 1386 x 800 pix - 403k] Caption : PR Photo 12h/03 shows a 90-second K-band exposure of the central 6 x 13 arcsec 2 around the Galactic Center obtained by MACAO-VLTI under average atmospheric conditions (0.8 arcsec seeing). Although the 14.6 magnitude guide star is located roughly 20 arcsec from the field center - this leading to isoplanatic degradation of image sharpness - the present image is nearly diffraction limited and has a point-source FWHM of about 0.115 arcsec. The center of our own galaxy is located in the Sagittarius constellation at a distance of approximately 30,000 light-years. PR Photo 12h/03 shows a short-exposure infrared view of this region, obtained by MACAO-VLTI during the early test phase. Recent AO observations using the NACO facility at the VLT provide compelling evidence that a supermassive black hole with 2.6 million solar masses is located at the very center, cf. ESO PR 17/02 . This result, based on astrometric observations of a star orbiting the black hole and approaching it to within a distance of only 17 light-hours, would not have been possible without images of diffraction limited resolution. Eta Carinae ESO PR Photo 12i/03 ESO PR Photo 12i/03 [Preview - JPEG: 400 x 482 pix - 25k [Normal - JPEG: 800 x 963 pix - 313k] Caption : PR Photo 12i/03 displays an infrared narrow K-band image of the massive star Eta Carinae . The image quality is difficult to estimate because the central star saturated the detector, but the clear structure of the diffraction spikes and the size of the smallest features visible in the photo indicate a near-diffraction limited performance. The field measures about 6.5 x 6.5 arcsec 2. Eta Carinae is one of the heaviest stars known, with a mass that probably exceeds 100 solar masses. It is about 4 million times brighter than the Sun, making it one of the most luminous stars known. Such a massive star has a comparatively short lifetime of about 1 million years only and - measured in the cosmic timescale- Eta Carinae must have formed quite recently. This star is highly unstable and prone to violent outbursts. They are caused by the very high radiation pressure at the star's upper layers, which blows significant portions of the matter at the "surface" into space during violent eruptions that may last several years. The last of these outbursts occurred between 1835 and 1855 and peaked in 1843. Despite its comparaticely large distance - some 7,500 to 10,000 light-years - Eta Carinae briefly became the second brightest star in the sky at that time (with an apparent magnitude -1), only surpassed by Sirius. Frosty Leo ESO PR Photo 12j/03 ESO PR Photo 12j/03 [Preview - JPEG: 411 x 400 pix - 22k [Normal - JPEG: 821 x 800 pix - 344k] Caption : PR Photo 12j/03 shows a 5 x 5 arcsec 2 K-band image of the peculiar star known as "Frosty Leo" obtained in 0.7 arcsec seeing. Although the object is comparatively bright (visual magnitude 11), it is a difficult AO target because of its extension of about 3 arcsec at visible wavelengths. The corrected image quality is about FWHM 0.1 arcsec. Frosty Leo is a magnitude 11 (post-AGB) star surrounded by an envelope of gas, dust, and large amounts of ice (hence the name). The associated nebula is of "butterfly" shape (bipolar morphology) and it is one of the best known examples of the brief transitional phase between two late evolutionary stages, asymptotic giant branch (AGB) and the subsequent planetary nebulae (PNe). For a three-solar-mass object like this one, this phase is believed to last only a few thousand years, the wink of an eye in the life of the star. Hence, objects like this one are very rare and Frosty Leo is one of the nearest and brightest among them.

Fourteen Times the Earth

NASA Astrophysics Data System (ADS)

2004-08-01

ESO HARPS Instrument Discovers Smallest Ever Extra-Solar Planet Summary A European team of astronomers [1] has discovered the lightest known planet orbiting a star other than the sun (an "exoplanet"). The new exoplanet orbits the bright star mu Arae located in the southern constellation of the Altar. It is the second planet discovered around this star and completes a full revolution in 9.5 days. With a mass of only 14 times the mass of the Earth, the new planet lies at the threshold of the largest possible rocky planets, making it a possible super Earth-like object. Uranus, the smallest of the giant planets of the Solar System has a similar mass. However Uranus and the new exoplanet differ so much by their distance from the host star that their formation and structure are likely to be very different. This discovery was made possible by the unprecedented accuracy of the HARPS spectrograph on ESO's 3.6-m telescope at La Silla, which allows radial velocities to be measured with a precision better than 1 m/s. It is another clear demonstration of the European leadership in the field of exoplanet research. PR Photo 25a/04: The HARPS Spectrograph and the 3.6m Telescope PR Photo 25b/04: Observed Velocity Variation of mu Arae (3.6m/HARPS, 1.2m Swiss/CORALIE, AAT/UCLES) PR Photo 25c/04: Velocity Variation of mu Arae Observed by HARPS (3.6m/HARPS) PR Photo 25d/04: "Velocity Curve" of mu Arae A unique planet hunting machine ESO PR Photo 25a/04 ESO PR Photo 25a/04 The HARPS Spectrograph and the 3.6m Telescope [Preview - JPEG: 602 x 400 pix - 211k] [Normal - JPEG: 1202 x 800 pix - 645k] Caption: ESO PR Photo 25a/04 represents a montage of the HARPS spectrograph and the 3.6m telescope at La Silla. The upper left shows the dome of the telescope, while the upper right illustrates the telescope itself. The HARPS spectrograph is shown in the lower image during laboratory tests. The vacuum tank is open so that some of the high-precision components inside can be seen. Since the first detection in 1995 of a planet around the star 51 Peg by Michel Mayor and Didier Queloz from the Geneva Observatory (Switzerland), astronomers have learned that our Solar System is not unique, as more than 120 giant planets orbiting other stars were discovered mostly by radial-velocity surveys (cf. ESO PR 13/00, ESO PR 07/01, and ESO PR 03/03). This fundamental observational method is based on the detection of variations in the velocity of the central star, due to the changing direction of the gravitational pull from an (unseen) exoplanet as it orbits the star. The evaluation of the measured velocity variations allows to deduce the planet's orbit, in particular the period and the distance from the star, as well as a minimum mass [2]. The continued quest for exoplanets requires better and better instrumentation. In this context, ESO undoubtedly took the leadership with the new HARPS spectrograph (High Accuracy Radial Velocity Planet Searcher) of the 3.6-m telescope at the ESO La Silla Observatory (see ESO PR 06/03). Offered in October 2003 to the research community in the ESO member countries, this unique instrument is optimized to detect planets in orbit around other stars ("exoplanets") by means of accurate (radial) velocity measurements with an unequalled precision of 1 metre per second. HARPS was built by a European Consortium [3] in collaboration with ESO. Already from the beginning of its operation, it has demonstrated its very high efficiency. By comparison with CORALIE, another well known planet-hunting optimized spectrograph installed on the Swiss-Euler 1.2-m telescope at La Silla (cf ESO PR 18/98, 12/99, 13/00), the typical observation times have been reduced by a factor one hundred and the accuracy of the measurements has been increased by a factor ten. These improvements have opened new perspectives in the search for extra-solar planets and have set new standards in terms of instrumental precision. The planetary system around mu Arae The star mu Arae is about 50 light years away. This solar-like star is located in the southern constellation Ara (the Altar) and is bright enough (5th magnitude) to be observed with the unaided eye. Mu Arae was already known to harbour a Jupiter-sized planet with a 650 days orbital period. Previous observations also hinted at the presence of another companion (a planet or a star) much further away. The new measurements obtained by the astronomers on this object, combined with data from other teams confirm this picture. But as François Bouchy, member of the team, states: "Not only did the new HARPS measurements confirm what we previously believed to know about this star but they also showed that an additional planet on short orbit was present. And this new planet appears to be the smallest yet discovered around a star other than the sun. This makes mu Arae a very exciting planetary system." "Listening" to the star ESO PR Photo 25b/04 ESO PR Photo 25b/04 Observed Velocity Variation of mu Arae [Preview - JPEG: 440 x 400 pix - 98k] [Normal - JPEG: 879 x 800 pix - 230k] ESO PR Photo 25c/04 ESO PR Photo 25c/04 Velocity Variation of mu Arae Observed by HARPS [Preview - JPEG: 460 x 400 pix - 90k] [Normal - JPEG: 919 x 800 pix - 215k] Captions: ESO PR Photo 25b/04 shows the measurements of the radial velocity of the star mu Arae obtained by HARPS on the ESO 3.6m telescope at La Silla (green triangles), CORALIE on the Swiss Leonhard Euler 1.2m telescope also on La Silla (red dots) and UCLES on the Anglo-Australian Telescope (blue circles). The solid line shows the best fit to the measurements, assuming the existence of two planets and an additional long-period companion. The fact that the line happens to have a given width is related to the existence of the newly found short period planet. The data shown span the interval from July 1998 to August 2004. ESO PR Photo 25c/04 illustrates the high-quality radial velocity measurements obtained with HARPS. Here also, the solid line shows the best fit to the measurements, assuming the existence of two planets. The data were obtained over a time span of 80 days and the first points shown are the data from the 8 nights in June. Note that the full span of the vertical axis is only 40 m/s! Error bars indicate the accuracy of the measurements. The lower part of the diagram displays the deviation of the measurements from the best fit. ESO PR Photo 25d/04 ESO PR Photo 25d/04 Observed Velocity Variation of mu Arae [Preview - JPEG: 440 x 400 pix - 78k] [Normal - JPEG: 879 x 800 pix - 171k] Caption: ESO PR Photo 25d/04 displays the HARPS radial velocity measurements phase-folded with the orbital period of the newly found exoplanet (9.5 days). The measurements have been corrected from the effect of the two longer period companions. The semi-amplitude of the curve is less than 5 m/s! Coupled with the 9.5 days orbital period, this implies a minimum mass for the newly discovered planet of 14 times the mass of the Earth. During 8 nights in June 2004, mu Arae was repeatedly observed and its radial velocity measured by HARPS to obtain information on the interior of the star. This so-called astero-seismology technique (see ESO PR 15/01) studies the small acoustic waves which make the surface of the star periodically pulsate in and out. By knowing the internal structure of the star, the astronomers aimed at understanding the origin of the unusual amount of heavy elements observed in its stellar atmosphere. This unusual chemical composition could provide unique information to the planet formation history. Says Nuno Santos, another member of the team: "To our surprise, the analysis of the new measurements revealed a radial velocity variation with a period of 9.5 days on top of the acoustic oscillation signal!" This discovery has been made possible thanks to the large number of measurements obtained during the astero-seimology campaign. From this date, the star, that was also part of the HARPS consortium survey programme, was regularly monitored with a careful observation strategy to reduce the "seismic noise" of the star. These new data confirmed both the amplitude and the periodicity of the radial velocity variations found during the 8 nights in June. The astronomers were left with only one convincing explanation to this periodic signal: a second planet orbits mu Arae and accomplishes a full revolution in 9.5 days. But this was not the only surprise: from the radial velocity amplitude, that is the size of the wobble induced by the gravitational pull of the planet on the star, the astronomers derived a mass for the planet of only 14 times the mass of the Earth! This is about the mass of Uranus, the smallest of the giant planets in the solar system. The newly found exoplanet therefore sets a new record in the smallest planet discovered around a solar type star. At the boundary The mass of this planet places it at the boundary between the very large earth-like (rocky) planets and giant planets. As current planetary formation models are still far from being able to account for all the amazing diversity observed amongst the extrasolar planets discovered, astronomers can only speculate on the true nature of the present object. In the current paradigm of giant planet formation, a core is formed first through the accretion of solid "planetesimals". Once this core reaches a critical mass, gas accumulates in a "runaway" fashion and the mass of the planet increases rapidly. In the present case, this later phase is unlikely to have happened for otherwise the planet would have become much more massive. Furthermore, recent models having shown that migration shortens the formation time, it is unlikely that the present object has migrated over large distances and remained of such small mass. This object is therefore likely to be a planet with a rocky (not an icy) core surrounded by a small (of the order of a tenth of the total mass) gaseous envelope and would therefore qualify as a "super-Earth". Further Prospects The HARPS consortium, led by Michel Mayor (Geneva Observatory, Switzerland), has been granted 100 observing nights per year during a 5-year period at the ESO 3.6-m telescope to perform one of the most ambitious systematic searches for exoplanets so far implemented worldwide. To this aim, the consortium repeatedly measures velocities of hundreds of stars that may harbour planetary systems. The detection of this new light planet after less than 1 year of operation demonstrates the outstanding potential of HARPS for detecting rocky planets on short orbits. Further analysis shows that performances achieved with HARPS make possible the detection of big "telluric" planets with only a few times the mass of the Earth. Such a capability is a major improvement compared to past planet surveys. Detection of such rocky objects strengthens the interest of future transit detections from space with missions like COROT, Eddington and KEPLER that shall be able to measure their radius. More information The research described in this Press release has been submitted for publication to the leading astrophysical journal "Astronomy and Astrophysics". A preprint is available as a postscript file at http://www.oal.ul.pt/~nuno/. Notes [1]: The team is composed of Nuno Santos (Centro de Astronomia e Astrofisica da Universidade de Lisboa, Portugal), François Bouchy and Jean-Pierre Sivan (Laboratoire d'astrophysique de Marseille, France), Michel Mayor, Francesco Pepe, Didier Queloz, Stéphane Udry, and Christophe Lovis (Observatoire de l'Université de Genève, Switzerland), Sylvie Vauclair, Michael Bazot (Toulouse, France), Gaspare Lo Curto and Dominique Naef (ESO), Xavier Delfosse (LAOG, Grenoble, France), Willy Benz and Christoph Mordasini (Physikalisches Institut der Universität Bern, Switzerland), and Jean-Louis Bertaux (Service d'Aéronomie de Verrière-le-Buisson, Paris, France). [2] A fundamental limitation of the radial-velocity method is the unknown of the inclination of the planetary orbit that only allows the determination of a lower mass limit for the planet. However, statistical considerations indicate that in most cases, the true mass will not be much higher than this value. The mass units for the exoplanets used in this text are 1 Jupiter mass = 22 Uranus masses = 318 Earth masses; 1 Uranus mass = 14.5 Earth masses. [3] HARPS has been designed and built by an international consortium of research institutes, led by the Observatoire de Genève (Switzerland) and including Observatoire de Haute-Provence (France), Physikalisches Institut der Universität Bern (Switzerland), the Service d'Aeronomie (CNRS, France), as well as ESO La Silla and ESO Garching.

Fast and accurate face recognition based on image compression

NASA Astrophysics Data System (ADS)

Zheng, Yufeng; Blasch, Erik

2017-05-01

Image compression is desired for many image-related applications especially for network-based applications with bandwidth and storage constraints. The face recognition community typical reports concentrate on the maximal compression rate that would not decrease the recognition accuracy. In general, the wavelet-based face recognition methods such as EBGM (elastic bunch graph matching) and FPB (face pattern byte) are of high performance but run slowly due to their high computation demands. The PCA (Principal Component Analysis) and LDA (Linear Discriminant Analysis) algorithms run fast but perform poorly in face recognition. In this paper, we propose a novel face recognition method based on standard image compression algorithm, which is termed as compression-based (CPB) face recognition. First, all gallery images are compressed by the selected compression algorithm. Second, a mixed image is formed with the probe and gallery images and then compressed. Third, a composite compression ratio (CCR) is computed with three compression ratios calculated from: probe, gallery and mixed images. Finally, the CCR values are compared and the largest CCR corresponds to the matched face. The time cost of each face matching is about the time of compressing the mixed face image. We tested the proposed CPB method on the "ASUMSS face database" (visible and thermal images) from 105 subjects. The face recognition accuracy with visible images is 94.76% when using JPEG compression. On the same face dataset, the accuracy of FPB algorithm was reported as 91.43%. The JPEG-compressionbased (JPEG-CPB) face recognition is standard and fast, which may be integrated into a real-time imaging device.

Wavelet-Smoothed Interpolation of Masked Scientific Data for JPEG 2000 Compression

DOE Office of Scientific and Technical Information (OSTI.GOV)

Brislawn, Christopher M.

2012-08-13

How should we manage scientific data with 'holes'? Some applications, like JPEG 2000, expect logically rectangular data, but some sources, like the Parallel Ocean Program (POP), generate data that isn't defined on certain subsets. We refer to grid points that lack well-defined, scientifically meaningful sample values as 'masked' samples. Wavelet-smoothing is a highly scalable interpolation scheme for regions with complex boundaries on logically rectangular grids. Computation is based on forward/inverse discrete wavelet transforms, so runtime complexity and memory scale linearly with respect to sample count. Efficient state-of-the-art minimal realizations yield small constants (O(10)) for arithmetic complexity scaling, and in-situ implementationmore » techniques make optimal use of memory. Implementation in two dimensions using tensor product filter banks is straighsorward and should generalize routinely to higher dimensions. No hand-tuning required when the interpolation mask changes, making the method aeractive for problems with time-varying masks. Well-suited for interpolating undefined samples prior to JPEG 2000 encoding. The method outperforms global mean interpolation, as judged by both SNR rate-distortion performance and low-rate artifact mitigation, for data distributions whose histograms do not take the form of sharply peaked, symmetric, unimodal probability density functions. These performance advantages can hold even for data whose distribution differs only moderately from the peaked unimodal case, as demonstrated by POP salinity data. The interpolation method is very general and is not tied to any particular class of applications, could be used for more generic smooth interpolation.« less

Pine Island Glacier, Antarctica, MISR Multi-angle Composite

Atmospheric Science Data Center

2013-12-17

...     View Larger Image (JPEG) A large iceberg has finally separated from the calving front ... next due to stereo parallax. This parallax is used in MISR processing to retrieve cloud heights over snow and ice. Additionally, a plume ...

Energy and Quality-Aware Multimedia Signal Processing

NASA Astrophysics Data System (ADS)

Emre, Yunus

Today's mobile devices have to support computation-intensive multimedia applications with a limited energy budget. In this dissertation, we present architecture level and algorithm-level techniques that reduce energy consumption of these devices with minimal impact on system quality. First, we present novel techniques to mitigate the effects of SRAM memory failures in JPEG2000 implementations operating in scaled voltages. We investigate error control coding schemes and propose an unequal error protection scheme tailored for JPEG2000 that reduces overhead without affecting the performance. Furthermore, we propose algorithm-specific techniques for error compensation that exploit the fact that in JPEG2000 the discrete wavelet transform outputs have larger values for low frequency subband coefficients and smaller values for high frequency subband coefficients. Next, we present use of voltage overscaling to reduce the data-path power consumption of JPEG codecs. We propose an algorithm-specific technique which exploits the characteristics of the quantized coefficients after zig-zag scan to mitigate errors introduced by aggressive voltage scaling. Third, we investigate the effect of reducing dynamic range for datapath energy reduction. We analyze the effect of truncation error and propose a scheme that estimates the mean value of the truncation error during the pre-computation stage and compensates for this error. Such a scheme is very effective for reducing the noise power in applications that are dominated by additions and multiplications such as FIR filter and transform computation. We also present a novel sum of absolute difference (SAD) scheme that is based on most significant bit truncation. The proposed scheme exploits the fact that most of the absolute difference (AD) calculations result in small values, and most of the large AD values do not contribute to the SAD values of the blocks that are selected. Such a scheme is highly effective in reducing the energy consumption of motion estimation and intra-prediction kernels in video codecs. Finally, we present several hybrid energy-saving techniques based on combination of voltage scaling, computation reduction and dynamic range reduction that further reduce the energy consumption while keeping the performance degradation very low. For instance, a combination of computation reduction and dynamic range reduction for Discrete Cosine Transform shows on average, 33% to 46% reduction in energy consumption while incurring only 0.5dB to 1.5dB loss in PSNR.

HOT WHITE DWARF SHINES IN YOUNG STAR CLUSTER

NASA Technical Reports Server (NTRS)

2002-01-01

A dazzling 'jewel-box' collection of over 20,000 stars can be seen in crystal clarity in this NASA Hubble Space Telescope image, taken with the Wide Field and Planetary Camera 2. The young (40 million year old) cluster, called NGC 1818, is 164,000 light-years away in the Large Magellanic Cloud (LMC), a satellite galaxy of our Milky Way. The LMC, a site of vigorous current star formation, is an ideal nearby laboratory for studying stellar evolution. In the cluster, astronomers have found a young white dwarf star, which has only very recently formed following the burnout of a red giant. Based on this observation astronomers conclude that the red giant progenitor star was 7.6 times the mass of our Sun. Previously, astronomers have estimated that stars anywhere from 6 to 10 solar masses would not just quietly fade away as white dwarfs but abruptly self-destruct in torrential explosions. Hubble can easily resolve the star in the crowded cluster, and detect its intense blue-white glow from a sizzling surface temperature of 50,000 degrees Fahrenheit. IMAGE DATA Date taken: December 1995 Wavelength: natural color reconstruction from three filters (I,B,U) Field of view: 100 light-years, 2.2 arc minutes TARGET DATA Name: NGC 1818 Distance: 164,000 light-years Constellation: Dorado Age: 40 million years Class: Rich star cluster Apparent magnitude: 9.7 Apparent diameter: 7 arc minutes Credit: Rebecca Elson and Richard Sword, Cambridge UK, and NASA (Original WFPC2 image courtesy J. Westphal, Caltech) Image files are available electronically via the World Wide Web at: http://oposite.stsci.edu/pubinfo/1998/16 and via links in http://oposite.stsci.edu/pubinfo/latest.html or http://oposite.stsci.edu/pubinfo/pictures.html. GIF and JPEG images are available via anonymous ftp to oposite.stsci.edu in /pubinfo/GIF/9816.GIF and /pubinfo/JPEG/9816.jpg.

Enabling Near Real-Time Remote Search for Fast Transient Events with Lossy Data Compression

NASA Astrophysics Data System (ADS)

Vohl, Dany; Pritchard, Tyler; Andreoni, Igor; Cooke, Jeffrey; Meade, Bernard

2017-09-01

We present a systematic evaluation of JPEG2000 (ISO/IEC 15444) as a transport data format to enable rapid remote searches for fast transient events as part of the Deeper Wider Faster programme. Deeper Wider Faster programme uses 20 telescopes from radio to gamma rays to perform simultaneous and rapid-response follow-up searches for fast transient events on millisecond-to-hours timescales. Deeper Wider Faster programme search demands have a set of constraints that is becoming common amongst large collaborations. Here, we focus on the rapid optical data component of Deeper Wider Faster programme led by the Dark Energy Camera at Cerro Tololo Inter-American Observatory. Each Dark Energy Camera image has 70 total coupled-charged devices saved as a 1.2 gigabyte FITS file. Near real-time data processing and fast transient candidate identifications-in minutes for rapid follow-up triggers on other telescopes-requires computational power exceeding what is currently available on-site at Cerro Tololo Inter-American Observatory. In this context, data files need to be transmitted rapidly to a foreign location for supercomputing post-processing, source finding, visualisation and analysis. This step in the search process poses a major bottleneck, and reducing the data size helps accommodate faster data transmission. To maximise our gain in transfer time and still achieve our science goals, we opt for lossy data compression-keeping in mind that raw data is archived and can be evaluated at a later time. We evaluate how lossy JPEG2000 compression affects the process of finding transients, and find only a negligible effect for compression ratios up to 25:1. We also find a linear relation between compression ratio and the mean estimated data transmission speed-up factor. Adding highly customised compression and decompression steps to the science pipeline considerably reduces the transmission time-validating its introduction to the Deeper Wider Faster programme science pipeline and enabling science that was otherwise too difficult with current technology.

Melting a Gold Sample within TEMPUS

NASA Technical Reports Server (NTRS)

2003-01-01

A gold sample is heated by the TEMPUS electromagnetic levitation furnace on STS-94, 1997, MET:10/09:20 (approximate). The sequence shows the sample being positioned electromagnetically and starting to be heated to melting. TEMPUS (stands for Tiegelfreies Elektromagnetisches Prozessiere unter Schwerelosigkeit (containerless electromagnetic processing under weightlessness). It was developed by the German Space Agency (DARA) for flight aboard Spacelab. The DARA project scientist was Igon Egry. The experiment was part of the space research investigations conducted during the Microgravity Science Laboratory-1R mission (STS-94, July 1-17 1997). DARA and NASA are exploring the possibility of flying an advanced version of TEMPUS on the International Space Station. (378KB JPEG, 2380 x 2676 pixels; downlinked video, higher quality not available) The MPG from which this composite was made is available at http://mix.msfc.nasa.gov/ABSTRACTS/MSFC-0300191.html.

Adapting the ISO 20462 softcopy ruler method for online image quality studies

NASA Astrophysics Data System (ADS)

Burns, Peter D.; Phillips, Jonathan B.; Williams, Don

2013-01-01

In this paper we address the problem of Image Quality Assessment of no reference metrics, focusing on JPEG corrupted images. In general no reference metrics are not able to measure with the same performance the distortions within their possible range and with respect to different image contents. The crosstalk between content and distortion signals influences the human perception. We here propose two strategies to improve the correlation between subjective and objective quality data. The first strategy is based on grouping the images according to their spatial complexity. The second one is based on a frequency analysis. Both the strategies are tested on two databases available in the literature. The results show an improvement in the correlations between no reference metrics and psycho-visual data, evaluated in terms of the Pearson Correlation Coefficient.

Restoration of Static JPEG Images and RGB Video Frames by Means of Nonlinear Filtering in Conditions of Gaussian and Non-Gaussian Noise

NASA Astrophysics Data System (ADS)

Sokolov, R. I.; Abdullin, R. R.

2017-11-01

The use of nonlinear Markov process filtering makes it possible to restore both video stream frames and static photos at the stage of preprocessing. The present paper reflects the results of research in comparison of these types image filtering quality by means of special algorithm when Gaussian or non-Gaussian noises acting. Examples of filter operation at different values of signal-to-noise ratio are presented. A comparative analysis has been performed, and the best filtered kind of noise has been defined. It has been shown the quality of developed algorithm is much better than quality of adaptive one for RGB signal filtering at the same a priori information about the signal. Also, an advantage over median filter takes a place when both fluctuation and pulse noise filtering.

Successful "First Light" for VLT High-Resolution Spectrograph

NASA Astrophysics Data System (ADS)

1999-10-01

Great Research Prospects with UVES at KUEYEN A major new astronomical instrument for the ESO Very Large Telescope at Paranal (Chile), the UVES high-resolution spectrograph, has just made its first observations of astronomical objects. The astronomers are delighted with the quality of the spectra obtained at this moment of "First Light". Although much fine-tuning still has to be done, this early success promises well for new and exciting science projects with this large European research facility. Astronomical instruments at VLT KUEYEN The second VLT 8.2-m Unit Telescope, KUEYEN ("The Moon" in the Mapuche language), is in the process of being tuned to perfection before it will be "handed" over to the astronomers on April 1, 2000. The testing of the new giant telescope has been successfully completed. The latest pointing tests were very positive and, from real performance measurements covering the entire operating range of the telescope, the overall accuracy on the sky was found to be 0.85 arcsec (the RMS-value). This is an excellent result for any telescope and implies that KUEYEN (as is already the case for ANTU) will be able to acquire its future target objects securely and efficiently, thus saving precious observing time. This work has paved the way for the installation of large astronomical instruments at its three focal positions, all prototype facilities that are capable of catching the light from even very faint and distant celestial objects. The three instruments at KUEYEN are referred to by their acronyms UVES , FORS2 and FLAMES. They are all dedicated to the investigation of the spectroscopic properties of faint stars and galaxies in the Universe. The UVES instrument The first to be installed is the Ultraviolet Visual Echelle Spectrograph (UVES) that was built by ESO, with the collaboration of the Trieste Observatory (Italy) for the control software. Complete tests of its optical and mechanical components, as well as of its CCD detectors and of the complex control system, cf. ESO PR Photos 44/98 , were made in the laboratories of the ESO Headquarters in Garching (Germany) before it was fully dismounted and shipped (some parts by air, others by ship) to the ESO Paranal Observatory, 130 km south of Antofagasta (Chile). Here, the different pieces of UVES (with a total weight of 8 tons) were carefully reassembled on the Nasmyth platform of KUEYEN and made ready for real observations (see ESO PR Photos 36p-t/99 ). UVES is a complex two-channel spectrograph that has been built around two giant optical (echelle diffraction) gratings, each ruled on a 84 cm x 21 cm x 12 cm block of the ceramic material Zerodur (the same that is used for the VLT 8.2-m main mirrors) and weighing more than 60 kg. These echelle gratings finely disperse the light from celestial objects collected by the telescope into its constituent wavelengths (colours). UVES' resolving power (an optical term that indicates the ratio between a given wavelength and the smallest wavelength difference between two spectral lines that are clearly separated by the spectrograph) may reach 110,000, a very high value for an astronomical instrument of such a large size. This means for instance that even comparatively small changes in radial velocity (a few km/sec only) can be accurately measured and also that it is possible to detect the faint spectral signatures of very rare elements in celestial objects. One UVES channel is optimized for the ultraviolet and blue, the other for visual and red light. The spectra are digitally recorded by two highly efficient CCD detectors for subsequent analysis and astrophysical interpretation. By optimizing the transmission of the various optical components in its two channels, UVES has a very high efficiency all the way from the UV (wavelength about 300 nm) to the near-infrared (1000 nm or 1 µm). This guarantees that only a minimum of the precious light that is collected by KUEYEN is lost and that detailed spectra can be obtained of even quite faint objects, down to about magnitude 20 (corresponding to nearly one million times fainter than what can be perceived with the unaided eye). The possibility of doing simultaneous observations in the two channels (with a dichroic mirror) ensures a further gain in data gathering efficiency. First Observations with UVES In the evening of September 27, 1999, the ESO astronomers turned the KUEYEN telescope and - for the first time - focussed the light of stars and galaxies on the entrance aperture of the UVES instrument. This is the crucial moment of "First Light" for a new astronomical facility. The following test period will last about three weeks. Much of the time during the first observing nights was spent by functional tests of the various observation modes and by targeting "standard stars" with well-known properties in order to measure the performance of the new instrument. They showed that it is behaving very well. This marks the beginning of a period of progressive fine-tuning that will ultimately bring UVES to peak performance. The astronomers also did a few "scientific" observations during these nights, aimed at exploring the capabilities of their new spectrograph. They were eager to do so, also because UVES is the first spectrograph of this type installed at a telescope of large diameter in the southern hemisphere . Many exciting research possibilities are now opening with UVES . They include a study of the chemical history of many galaxies in the Local Group, e.g. by observing the most metal-poor (oldest) stars in the Milky Way Galaxy and by obtaining the first, extremely detailed spectra of their brightest stars in the Magellanic Clouds. Quasars and distant compact galaxies will also be among the most favoured targets of the first UVES observers, not least because their spectra carry crucial information about the density, physical state and chemical composition of the early Universe. UVES First Light: SN 1987A One of the first spectral test exposures with UVES at KUEYEN was of SN 1987A , the famous supernova that exploded in the Large Magellanic Cloud (LMC) in February 1987, and the brightest supernova of the last 400 years. ESO PR Photo 37a/99 ESO PR Photo 37a/99 [Preview - JPEG: 400 x 455 pix - 87k] [Normal - JPEG: 645 x 733 pix - 166k] Caption to ESO PR Photo 37a/99 : This is a direct image of SN1987A, flanked by two nearby stars. The distance between these two is 4.5 arcsec. The slit (2.0 arcsec wide) through which the echelle spectrum shown in PR Photo 37b/99 was obtained, is outlined. This reproduction is from a 2-min exposure through a R(ed) filter with the FORS1 multi-mode instrument at VLT ANTU, obtained in 0.55 arcsec seeing on September 20, 1998. North is up and East is left. ESO PR Photo 37b/99 ESO PR Photo 37b/99 [Preview - JPEG: 400 x 459 pix - 130k] [Normal - JPEG: 800 x 917 pix - 470k] [High-Res - JPEG: 3000 x 3439 pix - 6.5M] Caption to ESO PR Photo 37b/99 : This shows the raw image, as read from the CCD, with the recorded echelle spectrum of SN1987A. With this technique, the supernova spectrum is divided into many individual parts ( spectral orders , each of which appears as a narrow horizontal line) that together cover the wavelength interval from 479 to 682 nm (from the bottom to the top), i.e. from blue to red light. Many bright emission lines from different elements are visible, e.g. the strong H-alpha line from hydrogen near the centre of the fourth order from the top. Emission lines from the terrestrial atmosphere are seen as vertical bright lines that cover the full width of the individual horizontal bands. Since this exposure was done with the nearly Full Moon above the horizon, an underlying, faint absorption-line spectrum of reflected sunlight is also visible. The exposure time was 30 min and the seeing conditions were excellent (0.5 arcsec). ESO PR Photo 37c/99 ESO PR Photo 37c/99 [Preview - JPEG: 400 x 355 pix - 156k] [Normal - JPEG: 800 x 709 pix - 498k] [High-Res - JPEG: 1074 x 952 pix - 766k] Caption to ESO PR Photo 37c/99 : This false-colour image has been extracted from another UVES echelle spectrum of SN 1987A, similar to the one shown in PR Photo 37b/99 , but with a slit width of 1 arcsec only. The upper part shows the emission lines of nitrogen, sulfur and hydrogen, as recorded in some of the spectral orders. The pixel coordinates (X,Y) in the original frame are indicated; the red colour indicates the highest intensities. Below is a more detailed view of the complex H-alpha emission line, with the corresponding velocities and the position along the spectrograph slit indicated. Several components of this line can be distinguished. The bulk of the emission (here shown in red colour) comes from the ring surrounding the supernova; the elongated shape here is due to the differential velocity exhibited by the near (to us) and far sides of the ring. The two bright spots on either side are emission from two outer rings (not immediately visible in PR Photo 37a/99 ). The extended emission in the velocity direction originates from material inside the ring upon which the fastest moving ejecta from the supernova have impacted (As seen in VLT data obtained previously with the ANTU/ISAAC combination (cf. PR Photo 11/99 ), exciting times now lie ahead for SN 1987A. The ejecta moving at 30,000 km/s (1/10th the speed of light) have now, 12 years after the explosion, reached the ring of material and the predicted "fireworks" are about to be ignited.) Finally, there is a broad emission extending all along the spectrograph slit (here mostly yellow) upon which the ring emission is superimposed. This is not associated with the supernova itself, but is H-alpha emission by diffuse gas in the Large Magellanic Cloud (LMC) in which SN 1987A is located. UVES First Light: QSO HE2217-2818 The power of UVES is demonstrated by this two-hour test exposure of the southern quasar QSO HE2217-2818 with U-magnitude = 16.5 and a redshift of z = 2.4. It was discovered a few years ago during the Hamburg-ESO Quasar Survey , by means of photographic plates taken with the 1-m ESO Schmidt Telescope at La Silla, the other ESO astronomical site in Chile. ESO PR Photo 37d/99 ESO PR Photo 37d/99 [Preview - JPEG: 400 x 309 pix - 92k] [Normal - JPEG: 800x 618 pix - 311k] [High-Res - JPEG: 3000 x 2316 pix - 5.0M] ESO PR Photo 37e/99 ESO PR Photo 37e/99 [Preview - JPEG: 400 x 310 pix - 43k] [Normal - JPEG: 800 x 619 pix - 100k] [High-Res - JPEG: 3003 x 2324 pix - 436k] Caption to ESO PR Photo 37d/99 : This UVES echelle spectrum QSO HE2217-2818 (U-magnitude = 16.5) is recorded in different orders (the individual horizontal lines) and altogether covers the wavelength interval between 330 - 450 nm (from the bottom to the top). It illustrates the excellent capability of UVES to work in the UV-band on even faint targets. Simultaneously with this observation, UVES also recorded the adjacent spectral region 465 - 660 nm in its other channel. The broad Lyman-alpha emission from ionized hydrogen associated with the powerful energy source of the QSO is seen in the upper half of the spectrum at wavelength 413 nm. At shorter wavelengths, the dark regions in the spectrum are Lyman-alpha absorption lines from intervening, neutral hydrogen gas located along the line-of-sight at different redshifts (the so-called Lyman-alpha forest ) in the redshift interval z = 1.7 - 2.4. Note that since this exposure was done with the nearly Full Moon above the horizon, an underlying, faint absorption-line spectrum of reflected sunlight is also visible. Caption to ESO PR Photo 37e/99 : A tracing of one spectral order, corresponding to one horizontal line in the echelle spectrum displayed in PR Photo 37d/99 . It shows part of the Lyman-alpha forest in the ultraviolet spectrum of the southern quasar QSO HE2217-2818 . The absorption lines are caused by intervening, neutral hydrogen gas located at different distances along the line-of-sight towards this quasar. How to obtain ESO Press Information ESO Press Information is made available on the World-Wide Web (URL: http://www.eso.org../ ). ESO Press Photos may be reproduced, if credit is given to the European Southern Observatory.

Effects of Digitization and JPEG Compression on Land Cover Classification Using Astronaut-Acquired Orbital Photographs

NASA Technical Reports Server (NTRS)

Robinson, Julie A.; Webb, Edward L.; Evangelista, Arlene

2000-01-01

Studies that utilize astronaut-acquired orbital photographs for visual or digital classification require high-quality data to ensure accuracy. The majority of images available must be digitized from film and electronically transferred to scientific users. This study examined the effect of scanning spatial resolution (1200, 2400 pixels per inch [21.2 and 10.6 microns/pixel]), scanning density range option (Auto, Full) and compression ratio (non-lossy [TIFF], and lossy JPEG 10:1, 46:1, 83:1) on digital classification results of an orbital photograph from the NASA - Johnson Space Center archive. Qualitative results suggested that 1200 ppi was acceptable for visual interpretive uses for major land cover types. Moreover, Auto scanning density range was superior to Full density range. Quantitative assessment of the processing steps indicated that, while 2400 ppi scanning spatial resolution resulted in more classified polygons as well as a substantially greater proportion of polygons < 0.2 ha, overall agreement between 1200 ppi and 2400 ppi was quite high. JPEG compression up to approximately 46:1 also did not appear to have a major impact on quantitative classification characteristics. We conclude that both 1200 and 2400 ppi scanning resolutions are acceptable options for this level of land cover classification, as well as a compression ratio at or below approximately 46:1. Auto range density should always be used during scanning because it acquires more of the information from the film. The particular combination of scanning spatial resolution and compression level will require a case-by-case decision and will depend upon memory capabilities, analytical objectives and the spatial properties of the objects in the image.

A multicenter observer performance study of 3D JPEG2000 compression of thin-slice CT.

PubMed

Erickson, Bradley J; Krupinski, Elizabeth; Andriole, Katherine P

2010-10-01

The goal of this study was to determine the compression level at which 3D JPEG2000 compression of thin-slice CTs of the chest and abdomen-pelvis becomes visually perceptible. A secondary goal was to determine if residents in training and non-physicians are substantially different from experienced radiologists in their perception of compression-related changes. This study used multidetector computed tomography 3D datasets with 0.625-1-mm thickness slices of standard chest, abdomen, or pelvis, clipped to 12 bits. The Kakadu v5.2 JPEG2000 compression algorithm was used to compress and decompress the 80 examinations creating four sets of images: lossless, 1.5 bpp (8:1), 1 bpp (12:1), and 0.75 bpp (16:1). Two randomly selected slices from each examination were shown to observers using a flicker mode paradigm in which observers rapidly toggled between two images, the original and a compressed version, with the task of deciding whether differences between them could be detected. Six staff radiologists, four residents, and six PhDs experienced in medical imaging (from three institutions) served as observers. Overall, 77.46% of observers detected differences at 8:1, 94.75% at 12:1, and 98.59% at 16:1 compression levels. Across all compression levels, the staff radiologists noted differences 64.70% of the time, the resident's detected differences 71.91% of the time, and the PhDs detected differences 69.95% of the time. Even mild compression is perceptible with current technology. The ability to detect differences does not equate to diagnostic differences, although perception of compression artifacts could affect diagnostic decision making and diagnostic workflow.

Comparison between a new computer program and the reference software for gray-scale median analysis of atherosclerotic carotid plaques.

PubMed

Casella, Ivan Benaduce; Fukushima, Rodrigo Bono; Marques, Anita Battistini de Azevedo; Cury, Marcus Vinícius Martins; Presti, Calógero

2015-03-01

To compare a new dedicated software program and Adobe Photoshop for gray-scale median (GSM) analysis of B-mode images of carotid plaques. A series of 42 carotid plaques generating ≥50% diameter stenosis was evaluated by a single observer. The best segment for visualization of internal carotid artery plaque was identified on a single longitudinal view and images were recorded in JPEG format. Plaque analysis was performed by both programs. After normalization of image intensity (blood = 0, adventitial layer = 190), histograms were obtained after manual delineation of plaque. Results were compared with nonparametric Wilcoxon signed rank test and Kendall tau-b correlation analysis. GSM ranged from 00 to 100 with Adobe Photoshop and from 00 to 96 with IMTPC, with a high grade of similarity between image pairs, and a highly significant correlation (R = 0.94, p < .0001). IMTPC software appears suitable for the GSM analysis of carotid plaques. © 2014 Wiley Periodicals, Inc.

[Development of an original computer program FISHMet: use for molecular cytogenetic diagnosis and genome mapping by fluorescent in situ hybridization (FISH)].

PubMed

Iurov, Iu B; Khazatskiĭ, I A; Akindinov, V A; Dovgilov, L V; Kobrinskiĭ, B A; Vorsanova, S G

2000-08-01

Original software FISHMet has been developed and tried for improving the efficiency of diagnosis of hereditary diseases caused by chromosome aberrations and for chromosome mapping by fluorescent in situ hybridization (FISH) method. The program allows creation and analysis of pseudocolor chromosome images and hybridization signals in the Windows 95 system, allows computer analysis and editing of the results of pseudocolor hybridization in situ, including successive imposition of initial black-and-white images created using fluorescent filters (blue, green, and red), and editing of each image individually or of a summary pseudocolor image in BMP, TIFF, and JPEG formats. Components of image computer analysis system (LOMO, Leitz Ortoplan, and Axioplan fluorescent microscopes, COHU 4910 and Sanyo VCB-3512P CCD cameras, Miro-Video, Scion LG-3 and VG-5 image capture maps, and Pentium 100 and Pentium 200 computers) and specialized software for image capture and visualization (Scion Image PC and Video-Cup) have been used with good results in the study.

Energy efficiency of task allocation for embedded JPEG systems.

PubMed

Fan, Yang-Hsin; Wu, Jan-Ou; Wang, San-Fu

2014-01-01

Embedded system works everywhere for repeatedly performing a few particular functionalities. Well-known products include consumer electronics, smart home applications, and telematics device, and so forth. Recently, developing methodology of embedded systems is applied to conduct the design of cloud embedded system resulting in the applications of embedded system being more diverse. However, the more energy consumes result from the more embedded system works. This study presents hyperrectangle technology (HT) to embedded system for obtaining energy saving. The HT adopts drift effect to construct embedded systems with more hardware circuits than software components or vice versa. It can fast construct embedded system with a set of hardware circuits and software components. Moreover, it has a great benefit to fast explore energy consumption for various embedded systems. The effects are presented by assessing a JPEG benchmarks. Experimental results demonstrate that the HT, respectively, achieves the energy saving by 29.84%, 2.07%, and 68.80% on average to GA, GHO, and Lin.

Modeling of video compression effects on target acquisition performance

NASA Astrophysics Data System (ADS)

Cha, Jae H.; Preece, Bradley; Espinola, Richard L.

2009-05-01

The effect of video compression on image quality was investigated from the perspective of target acquisition performance modeling. Human perception tests were conducted recently at the U.S. Army RDECOM CERDEC NVESD, measuring identification (ID) performance on simulated military vehicle targets at various ranges. These videos were compressed with different quality and/or quantization levels utilizing motion JPEG, motion JPEG2000, and MPEG-4 encoding. To model the degradation on task performance, the loss in image quality is fit to an equivalent Gaussian MTF scaled by the Structural Similarity Image Metric (SSIM). Residual compression artifacts are treated as 3-D spatio-temporal noise. This 3-D noise is found by taking the difference of the uncompressed frame, with the estimated equivalent blur applied, and the corresponding compressed frame. Results show good agreement between the experimental data and the model prediction. This method has led to a predictive performance model for video compression by correlating various compression levels to particular blur and noise input parameters for NVESD target acquisition performance model suite.

Analysis-Preserving Video Microscopy Compression via Correlation and Mathematical Morphology

PubMed Central

Shao, Chong; Zhong, Alfred; Cribb, Jeremy; Osborne, Lukas D.; O’Brien, E. Timothy; Superfine, Richard; Mayer-Patel, Ketan; Taylor, Russell M.

2015-01-01

The large amount video data produced by multi-channel, high-resolution microscopy system drives the need for a new high-performance domain-specific video compression technique. We describe a novel compression method for video microscopy data. The method is based on Pearson's correlation and mathematical morphology. The method makes use of the point-spread function (PSF) in the microscopy video acquisition phase. We compare our method to other lossless compression methods and to lossy JPEG, JPEG2000 and H.264 compression for various kinds of video microscopy data including fluorescence video and brightfield video. We find that for certain data sets, the new method compresses much better than lossless compression with no impact on analysis results. It achieved a best compressed size of 0.77% of the original size, 25× smaller than the best lossless technique (which yields 20% for the same video). The compressed size scales with the video's scientific data content. Further testing showed that existing lossy algorithms greatly impacted data analysis at similar compression sizes. PMID:26435032

Energy Efficiency of Task Allocation for Embedded JPEG Systems

PubMed Central

2014-01-01

Embedded system works everywhere for repeatedly performing a few particular functionalities. Well-known products include consumer electronics, smart home applications, and telematics device, and so forth. Recently, developing methodology of embedded systems is applied to conduct the design of cloud embedded system resulting in the applications of embedded system being more diverse. However, the more energy consumes result from the more embedded system works. This study presents hyperrectangle technology (HT) to embedded system for obtaining energy saving. The HT adopts drift effect to construct embedded systems with more hardware circuits than software components or vice versa. It can fast construct embedded system with a set of hardware circuits and software components. Moreover, it has a great benefit to fast explore energy consumption for various embedded systems. The effects are presented by assessing a JPEG benchmarks. Experimental results demonstrate that the HT, respectively, achieves the energy saving by 29.84%, 2.07%, and 68.80% on average to GA, GHO, and Lin. PMID:24982983

Isolated Star-Forming Cloud Discovered in Intracluster Space

NASA Astrophysics Data System (ADS)

2003-01-01

Subaru and VLT Join Forces in New Study of Virgo Galaxy Cluster [1] Summary At a distance of some 50 million light-years, the Virgo Cluster is the nearest galaxy cluster. It is located in the zodiacal constellation of the same name (The Virgin) and is a large and dense assembly of hundreds of galaxies. The "intracluster" space between the Virgo galaxies is permeated by hot X-ray emitting gas and, as has become clear recently, by a sparse "intracluster population of stars". So far, stars have been observed to form in the luminous parts of galaxies. The most massive young stars are often visible indirectly by the strong emission from surrounding cocoons of hot gas, which is heated by the intense radiation from the embedded stars. These "HII regions" (pronounced "Eitch-Two" and so named because of their content of ionized hydrogen) may be very bright and they often trace the beautiful spiral arms seen in disk galaxies like our own Milky Way. New observations by the Japanese 8-m Subaru telescope and the ESO Very Large Telescope (VLT) have now shown that massive stars can also form in isolation, far from the luminous parts of galaxies. During a most productive co-operation between astronomers working at these two world-class telescopes, a compact HII region has been discovered at the very boundary between the outer halo of a Virgo cluster galaxy and Virgo intracluster space. This cloud is illuminated and heated by a few hot and massive young stars. The estimated total mass of the stars in the cloud is only a few hundred times that of the Sun. Such an object is rare at the present epoch. However, there may have been more in the past, at which time they were perhaps responsible for the formation of a fraction of the intracluster stellar population in clusters of galaxies. Massive stars in such isolated HII regions will explode as supernovae at the end of their short lives, and enrich the intracluster medium with heavy elements. Observations of two other Virgo cluster galaxies, Messier 86 and Messier 84, indicate the presence of other isolated HII regions, thus suggesting that isolated star formation may occur more generally in galaxies. If so, this process may provide a natural explanation to the current riddle why some young stars are found high up in the halo of our own Milky Way galaxy, far from the star-forming clouds in the main plane. The Virgo Cluster ESO PR Photo 04a/03 ESO PR Photo 04a/03 [Preview - JPEG: 400 x 428 pix - 74k [Normal - JPEG: 800 x 855 pix - 408k] [Hi-Res - JPEG: 4252 x 4544 pix - 10.3M] ESO PR Photo 04b/03 ESO PR Photo 04b/03 [Preview - JPEG: 433 x 400 pix - 60k [Normal - JPEG: 865 x 800 pix - 456k] [Hi-Res - JPEG: 3077 x 2847 pix - 4.2M] Captions: PR Photo 04a/03 displays a sky field near some of the brighter galaxies in the Virgo Cluster. It was obtained in April 2000 with the Wide Field Imager (WFI) at the La Silla Observatory (exposure 6 x 5 min; red R-band; seeing 1.3 arcsec). The large elliptical galaxy at the centre is Messier 84; the elongated image of NGC 4388 (an active spiral galaxy, seen from the side) is in the lower left corner. The field measures 16.9 x 15.7 arcmin2. PR Photo 04b/03 shows a larger region of the Virgo cluster, with the galaxies Messier 86 (at the upper edge of the field, to the left of the centre), as well as Messier 84 (upper right) and NGC 4388 (just below the centre) that are also seen in PR Photo 04a/03. It is reproduced from a long-exposure Subaru Suprime-Cam image, obtained in the red light of ionized hydrogen (the H-alpha spectral line at wavelength 656.2 nm). In order to show the faintest possible hydrogen emitting objects embedded in the outskirts of bright galaxies, their smooth envelopes have been "subtracted" during the image processing. The field measures 34 x 27 arcmin2. Part of this sky field is shown in colour in PR Photo 04c/03. Captions: PR Photo 04a/03 displays a sky field near some of the brighter galaxies in the Virgo Cluster. It was obtained in April 2000 with the Wide Field Imager (WFI) at the La Silla Observatory (exposure 6 x 5 min; red R-band; seeing 1.3 arcsec). The large elliptical galaxy at the centre is Messier 84; the elongated image of NGC 4388 (an active spiral galaxy, seen from the side) is in the lower left corner. The field measures 16.9 x 15.7 arcmin2. PR Photo 04b/03 shows a larger region of the Virgo cluster, with the galaxies Messier 86 (at the upper edge of the field, to the left of the centre), as well as Messier 84 (upper right) and NGC 4388 (just below the centre) that are also seen in PR Photo 04a/03. It is reproduced from a long-exposure Subaru Suprime-Cam image, obtained in the red light of ionized hydrogen (the H-alpha spectral line at wavelength 656.2 nm). In order to show the faintest possible hydrogen emitting objects embedded in the outskirts of bright galaxies, their smooth envelopes have been "subtracted" during the image processing. The field measures 34 x 27 arcmin2. Part of this sky field is shown in colour in PR Photo 04c/03. The galaxies in the Universe are rarely isolated - they prefer company. Many are found within dense structures, referred to as galaxy clusters, cf. e.g., ESO PR Photo 16a/99. The galaxy cluster nearest to us is seen in the direction of the zodiacal constellation Virgo (The Virgin), at a distance of approximately 50 million light-years. PR Photo 04a/03 (from the Wide Field Imager camera at the ESO La Silla Observatory) shows a small sky region near the centre of this cluster with some of the brighter cluster galaxies. PR Photo 04b/03 displays an image of a larger field (partially overlapping Photo 04a/03) in the light of ionized hydrogen - it was obtained by the Japanese 8.2-m Subaru telescope on Mauna Kea (Hawaii, USA). The field includes some of the large galaxies in this cluster, e.g., Messier 86, Messier 84 and NGC 4388. In order to show the faintest possible hydrogen emitting objects embedded in the outskirts of bright galaxies, their smooth envelopes have been "subtracted" during the image processing. This is why they look quite different in the two photos. Clusters of galaxies are believed to have formed because of the strong gravitational pull from dark and luminous matter. The Virgo cluster is considered to be a relatively young cluster, because studies of the distribution of its member galaxies and X-ray investigations of hot cluster gas have revealed small "subclusters of galaxies" around the major galaxies Messier 87, Messier 86 and Messier 49. These subclusters are yet to merge to form a dense and smooth galaxy cluster. The Virgo cluster is apparently cigar-shaped, with its longest dimension of about 10 million light-years near the line-of-sight direction - we see it "from the end". Stars in intracluster space Galaxy clusters are dominated by dark matter. The largest fraction of the luminous (i.e. "visible") cluster mass is made up of the hot gas that permeates all of the cluster. Recent observations of "intracluster" stars have confirmed that, in addition to the individual galaxies, the Virgo cluster also contains a so-called "diffuse stellar component", which is located in the space between the cluster galaxies. The first hint of this dates back to 1951 when Swiss astronomer Fritz Zwicky (1898-1974), working at the 5-m telescope at Mount Palomar in California (USA), claimed the discovery of diffuse light coming from the space between the galaxies in another large cluster of galaxies, the Coma cluster. The brightness of this intracluster light is 100 times fainter than the average night-sky brightness on the ground (mostly caused by the glow of atoms in the upper terrestrial atmosphere) and its measurement is difficult even with present technology. We now know that this intracluster glow comes from individual stars in that region. Planetary nebulae More recently, astronomers have undertaken a new and different approach to detect the elusive intracluster stars. They now search for Sun-like stars in their final dying phase during which they eject their outer layers into surrounding space. At the same time they unveil their small and hot stellar core which appears as a "white dwarf star". Such objects are known as "planetary nebulae" because some of those nearby, e.g. the "Dumbbell Nebula" (cf. ESO PR Photo 38a/98) resemble the disks of the outer solar system planets when viewed in small telescopes. The ejected envelope is illuminated and heated by the very hot star at its centre. This nebula emits strongly in characteristic emission lines of oxygen (green; at wavelengths 495.9 and 500.7 nm) and hydrogen (red; the H-alpha line at 656.2 nm). Planetary nebulae may be distinguished from other emission nebulae by the fact that their main green oxygen line at 500.7 nm is normally about 3 to 5 times brighter than the red H-alpha line. Search for intracluster planetary nebulae An international team of astronomers [2] is now carrying out a very challenging research programme, aimed at finding intracluster planetary nebulae. For this, they observe the regions between cluster galaxies with specially designed, narrow-band optical filters tuned to the wavelength of the green oxygen lines. The main goal is to study the overall properties of the diffuse stellar component in the nearby Virgo cluster. How much diffuse light comes from the intracluster space, how is it distributed within the cluster, and what is its origin? Because the stars in this region are apparently predominantly old, the most likely explanation of their presence in this region is that they formed inside individual galaxies, which were subsequently stripped of many of their stars during close encounters with other galaxies during the initial stages of cluster formation. These "lost" stars were then dispersed into intracluster space where we now find them. The Subaru observations ESO PR Photo 04c/03 ESO PR Photo 04c/03 [Preview - JPEG: 471 x 400 pix - 62k [Normal - JPEG: 941 x 800 pix - 776k] [Hi-Res - JPEG: 3028 x 2573 pix - 4.4M] ESO PR Photo 04d/03 ESO PR Photo 04d/03 [Preview - JPEG: 444 x 400 pix - 92k [Normal - JPEG: 888 x 800 pix - 600k] Captions: PR Photo 04c/03 shows the general location of the newly discovered compact HII region with respect to a previously published Subaru Suprime-Cam image of NGC 4388. The image combines H-alpha narrow-band (hydrogen), O[III] narrow-band (oxygen), and broad-band optical V-band data. The extended pink filamentary structure in this image is due to gas ionized by the radiation from the nucleus of the galaxy. The vertical lines are caused by detector saturation of bright objects. The field of view is 11.6 x 5.0 arcmin2. The outlined region indicates the sky field shown in PR Photo 04d/03 which is an H-alpha image of a 4 x 3 arcmin2 region in the Virgo intracluster region. This is part of the area selected for spectroscopic follow-up observations with the FORS2 multimode instrument at the 8.2-m VLT YEPUN telescope. The image shows the confirmed compact HII region (in blue circle to the left) and the confirmed intracluster planetary nebula (in yellow and red circle at the top). The two other objects (in red circles) are additional planetary nebulae candidates, which will soon be observed spectroscopically. North is up, and East is left. The newly discovered HII-region (blue circle) is well visible on PR Photo 04c/03 and faintly on the high-resolution versions of PR Photo 04a/03 and PR Photo 04b/03. Captions: PR Photo 04c/03 shows the general location of the newly discovered compact HII region with respect to a previously published Subaru Suprime-Cam image of NGC 4388. The image combines H-alpha narrow-band (hydrogen), O[III] narrow-band (oxygen), and broad-band optical V-band data. The extended pink filamentary structure in this image is due to gas ionized by the radiation from the nucleus of the galaxy. The vertical lines are caused by detector saturation of bright objects. The field of view is 11.6 x 5.0 arcmin2. The outlined region indicates the sky field shown in PR Photo 04d/03 which is an H-alpha image of a 4 x 3 arcmin2 region in the Virgo intracluster region. This is part of the area selected for spectroscopic follow-up observations with the FORS2 multimode instrument at the 8.2-m VLT YEPUN telescope. The image shows the confirmed compact HII region (in blue circle to the left) and the confirmed intracluster planetary nebula (in yellow and red circle at the top). The two other objects (in red circles) are additional planetary nebulae candidates, which will soon be observed spectroscopically. North is up, and East is left. The newly discovered HII-region (blue circle) is well visible on PR Photo 04c/03 and faintly on the high-resolution versions of PR Photo 04a/03 and PR Photo 04b/03. Japanese and European astronomers used the Suprime-Cam wide-field mosaic camera at the 8-m Subaru telescope (Mauna Kea, Hawaii, USA) to search for intracluster planetary nebulae in one of the densest regions of the Virgo cluster, cf. PR Photo 04b/03. They needed a telescope of this large size in order to select such objects and securely discriminate them from the thousands of foreground stars in the Milky Way and background galaxies. In particular, by observing in two narrow-band filters sensitive to oxygen and hydrogen, respectively, the planetary nebulae visible in this field could be "separated" from distant (high-redshift) background galaxies, which do not have strong emission in both the green and red band. It is very time-consuming to observe the weak H-alpha emission and this can only be done with a big telescope. Some 40 intracluster planetary nebulae candidates were found in this field which had the expected oxygen/H-alpha line intensity ratios of 3 - 5, such as those depicted PR Photo 04d/03. Unexpectedly, however, the data also showed a small number of star-like emission objects with oxygen/H-alpha line ratios of about 1. This is more typical of a cloud of ionized gas around young, massive stars - like the so-called HII regions in our own galaxy, the Milky Way. However, it would be very unusual to find such star formation regions in the intracluster region, so follow-up spectroscopic observations were clearly needed for confirmation. THE VLT MEASUREMENTS ESO PR Photo 04e/03 ESO PR Photo 04e/03 [Preview - JPEG: 506 x 400 pix - 35k [Normal - JPEG: 1011 x 800 pix - 128k] Captions: PR Photo 04e/03 displays the emission spectrum (in the visible/near-IR spectral region) of the compact HII region in the Virgo intracluster field, as obtained with the FORS2 multi-mode instrument of the 8.2-m VLT YEPUN telescope on Paranal. Emission lines from oxygen ([OIII]) and hydrogen (H-alpha, H-beta, H-gamma) atoms as well as ionized sulphur ([SII], [SIII]) are identified. The only way to make sure that these unusual objects are actually powered by young stars is by a detailed spectroscopical study, analyzing the emitted light over a wide range of wavelengths. One of the objects was observed in this way in April 2002 with the FORS2 multi-mode instrument at the 8.2-m VLT YEPUN telescope at the ESO Paranal Observatory (Chile). This was a most challenging observation, even for this very powerful facility, requiring several hours of exposure time. The brightness of the faint object (the flux of the oxygen [OIII 500.7]-line) was comparable to that of a 60-Watt light bulb at a distance of about 6.6 million km, i.e., about 17 times farther than the Moon. The recorded (long-slit) spectrum (PR Photo 04e/03) is indeed that of an HII region, with characteristic emission lines from hydrogen, oxygen and sulphur, and with underlying blue "continuum" emission from hot, young stars. This is the first concrete evidence that some of the ionized hydrogen gas in the intracluster medium near NGC 4388 is heated by massive stars, rather than radiation from the nucleus of the galaxy. Comparing the spectrum with simple starburst models showed that this HII region is "powered" by one or two hot and massive (O-type) stars. The best-fitting starburst model implies an estimated total mass of young stars of some 400 solar masses with an age of about 3 million years. The object is obviously very compact - it is indeed unresolved in all the images. The inferred radius of the HII region is about 11 light-years. Young stars form far from galaxies This compact star-forming region is located about 3.4 arcmin north and 0.9 arcmin west of the galaxy NGC 4388, corresponding to a distance of some 82,000 light-years (projected) from the main star-forming regions in this galaxy. The small cloud is moving away from us with an observed velocity of 2670 km/sec. This is considerably faster than the mean velocity of the Virgo cluster (about 1200 km/sec) but similar to that of NGC 4388 (2520 km/sec), indicating that it is probably falling through the Virgo cluster core together with NGC 4388, but it cannot have moved far during the comparatively short lifetime of its massive stars. It is not known whether it once was or still is bound to NGC 4388, or whether it only belonged to the surroundings that fell into the Virgo cluster with this galaxy. In any case, the existence of this HII region is a clear demonstration that stars can form in the "diffuse" outskirts of galaxies, if not in intracluster space. Because of internal dynamical processes, the stars in this object cannot remain forever in a dense cluster. Within a few hundred million years they will disperse and mix with the diffuse stellar population nearby. This isolated star formation is therefore likely to contribute to the intracluster stellar population, either directly, or after having moved away from the halo of NGC 4388. This mode of isolated star formation does not contribute much to the total intracluster light emission - at the current rate it can explain only a small fraction of the diffuse light now observed in this region. However, it may have been more significant in the past, when protogalaxies and proto-galaxy groups, rich in neutral gas and with gas clouds at large distances from their centers, fell into the forming Virgo cluster for the first time. Prospects The existence of isolated compact HII regions like this one is important as a very different site of star formation than those normally seen in galaxies. The massive stars born in such isolated clouds will explode as supernovae and enrich the Virgo intracluster medium with metals. Other possible - but not yet spectroscopically verified - compact HII regions in the halos of both Messier 86 and Messier 84 have been detected during this work. This finding thus also calls into question the current use of emission-line planetary nebulae luminosities as a distance indicator; to obtain the best possible accuracy, it will henceforth be necessary to weed out possible HII regions in the samples. If compact HII regions exist generally in galaxies, they may possibly be the birthplaces of some of the young stars now observed in the halo of our Milky Way galaxy, high above the main plane. Observational programmes with both the Subaru and VLT telescopes are now planned to discover more of these interesting objects and to explore their properties.

Recovering DC coefficients in block-based DCT.

PubMed

Uehara, Takeyuki; Safavi-Naini, Reihaneh; Ogunbona, Philip

2006-11-01

It is a common approach for JPEG and MPEG encryption systems to provide higher protection for dc coefficients and less protection for ac coefficients. Some authors have employed a cryptographic encryption algorithm for the dc coefficients and left the ac coefficients to techniques based on random permutation lists which are known to be weak against known-plaintext and chosen-ciphertext attacks. In this paper we show that in block-based DCT, it is possible to recover dc coefficients from ac coefficients with reasonable image quality and show the insecurity of image encryption methods which rely on the encryption of dc values using a cryptoalgorithm. The method proposed in this paper combines dc recovery from ac coefficients and the fact that ac coefficients can be recovered using a chosen ciphertext attack. We demonstrate that a method proposed by Tang to encrypt and decrypt MPEG video can be completely broken.

Bubble and Drop Nonlinear Dynamics experiment

NASA Technical Reports Server (NTRS)

2003-01-01

The Bubble and Drop Nonlinear Dynamics (BDND) experiment was designed to improve understanding of how the shape and behavior of bubbles respond to ultrasound pressure. By understanding this behavior, it may be possible to counteract complications bubbles cause during materials processing on the ground. This 12-second sequence came from video downlinked from STS-94, July 5 1997, MET:3/19:15 (approximate). The BDND guest investigator was Gary Leal of the University of California, Santa Barbara. The experiment was part of the space research investigations conducted during the Microgravity Science Laboratory-1R mission (STS-94, July 1-17 1997). Advanced fluid dynamics experiments will be a part of investigations plarned for the International Space Station. (189KB JPEG, 1293 x 1460 pixels; downlinked video, higher quality not available) The MPG from which this composite was made is available at http://mix.msfc.nasa.gov/ABSTRACTS/MSFC-0300163.html.

Exploration of available feature detection and identification systems and their performance on radiographs

NASA Astrophysics Data System (ADS)

Wantuch, Andrew C.; Vita, Joshua A.; Jimenez, Edward S.; Bray, Iliana E.

2016-10-01

Despite object detection, recognition, and identification being very active areas of computer vision research, many of the available tools to aid in these processes are designed with only photographs in mind. Although some algorithms used specifically for feature detection and identification may not take explicit advantage of the colors available in the image, they still under-perform on radiographs, which are grayscale images. We are especially interested in the robustness of these algorithms, specifically their performance on a preexisting database of X-ray radiographs in compressed JPEG form, with multiple ways of describing pixel information. We will review various aspects of the performance of available feature detection and identification systems, including MATLABs Computer Vision toolbox, VLFeat, and OpenCV on our non-ideal database. In the process, we will explore possible reasons for the algorithms' lessened ability to detect and identify features from the X-ray radiographs.

How C2 Goes Wrong (Briefing Chart)

DTIC Science & Technology

2014-06-01

Guardian/Pix/pictures/2012/12/19/1355903591995/Hillsborough-disaster-010.jpg Cases (3): Disaster/Emergency Response (Cont.) Columbine High School ...r337173_1529332.jpg http://bossip.files.wordpress.com/2012/11/ massacre -e1352384704110.jpeg?w=625&h=389 The Punchline “What we’ve got here, is

Genomics & Genetics | National Agricultural Library

Science.gov Websites

Skip to main content Home National Agricultural Library United States Department of Agriculture Ag agricultural and environmental settings. Deadpool proximal sensing cart docx xlsx 3x jpeg 5x pdf Data from Buytaert. NAL Home | USDA.gov | Agricultural Research Service | Plain Language | FOIA | Accessibility

Charting the Giants

NASA Astrophysics Data System (ADS)

2004-06-01

Largest Census Of X-Ray Galaxy Clusters Provides New Constraints on Dark Matter [1] Clusters of galaxies Clusters of galaxies are very large building blocks of the Universe. These gigantic structures contain hundreds to thousands of galaxies and, less visible but equally interesting, an additional amount of "dark matter" whose origin still defies the astronomers, with a total mass of thousands of millions of millions times the mass of our Sun. The comparatively nearby Coma cluster, for example, contains thousands of galaxies and measures more than 20 million light-years across. Another well-known example is the Virgo cluster at a distance of about 50 million light-years, and still stretching over an angle of more than 10 degrees in the sky! Clusters of galaxies form in the densest regions of the Universe. As such, they perfectly trace the backbone of the large-scale structures in the Universe, in the same way that lighthouses trace a coastline. Studies of clusters of galaxies therefore tell us about the structure of the enormous space in which we live. The REFLEX survey ESO PR Photo 18a/04 ESO PR Photo 18a/04 Galaxy Cluster RXCJ 1206.2-0848 (Visible and X-ray) [Preview - JPEG: 400 x 478 pix - 70k] [Normal - JPEG: 800 x 956 pix - 1.2Mk] Caption: PR Photo 18a shows the very massive distant cluster of galaxies RXCJ1206.2-0848, newly discovered during the REFLEX project, and located at a redshift of z = 0.44 [3]. The contours indicate the X-ray surface brightness distribution. Most of the yellowish galaxies are cluster members. A gravitationally lensed galaxy with a distorted, very elongated image is seen, just right of the centre. The image was obtained with the EFOSC multi-mode instrument on the ESO 3.6-m telescope at the La Silla Observatory (Chile). ESO PR Photo 18b/04 ESO PR Photo 18b/04 Galaxy cluster RXCJ1131.9-1955 [Preview - JPEG: 400 x 477 pix - 40k] [Normal - JPEG: 800 x 953 pix - 912k] [FullRes - JPEG: 2251 x 2681 pix - 7.7Mk] Caption: PR Photo 18b displays the very massive galaxy cluster RXCJ1131.9-1955 at redshift z = 0.306 [3] in a very rich galaxy field with two major concentrations. It was originally found by George Abell and designated "Abell 1300". The image was obtained with the ESO/MPG 2.2-m telescope and the WFI camera at La Silla. ESO PR Photo 18c/04 ESO PR Photo 18c/04 Galaxy Cluster RXCJ0937.9-2020 [Preview - JPEG: 400 x 746 pix - 60k] [Normal - JPEG: 800 x 1491 pix - 1.3M] [HiRes - JPEG: 2380 x 4437 pix - 14.2M] Caption: PR Photo 18c/04 shows the much smaller, more nearby galaxy group RXCJ0937.9-2020 at a redshift of z = 0.034 [3]. It is dominated by the massive elliptical galaxy seen at the top of the image. The photo covers only the southern part of this group. Such galaxy groups with typical masses of a few 1013 solar masses constitute the smallest objects included in the REFLEX catalogue. This image was obtained with the FORS1 multi-mode instrument on the ESO 8.2-m VLT Antu telescope. ESO PR Video Clip 05/04 ESO PR Video Clip 05/04 Galaxy Clusters in the REFLEX Catalogue (3D-visualization) [MPG - 11.7Mb] Caption: ESO PR Video Clip 05/04 illustrates the three-dimensional distribution of the galaxy clusters identfied in the ROSAT All-Sky survey in the northern and southern sky. In addition to the galaxy clusters in the REFLEX catalogue this movie also contains those identified during the ongoing, deeper search for X-ray clusters: the extension of the southern REFLEX Survey and the northern complementary survey that is conducted by the MPE team at the Calar Alto observatory and at US observatories in collaboration with John Huchra and coworkers at the Harvard-Smithonian Center for Astrophysics. In total, more than 1400 X-ray bright galaxy cluster have been found to date. (Prepared by Ferdinand Jamitzky.) Following this idea, a European team of astronomers [2], under the leadership of Hans Böhringer (MPE, Garching, Germany), Luigi Guzzo (INAF, Milano, Italy), Chris A. Collins (JMU, Liverpool), and Peter Schuecker (MPE, Garching) has embarked on a decade-long study of these gargantuan structures, trying to locate the most massive of clusters of galaxies. Since about one-fifth of the optically invisible mass of a cluster is in the form of a diffuse very hot gas with a temperature of the order of several tens of millions of degrees, clusters of galaxies produce powerful X-ray emission. They are therefore best discovered by means of X-ray satellites. For this fundamental study, the astronomers thus started by selecting candidate objects using data from the X-ray Sky Atlas compiled by the German ROSAT satellite survey mission. This was the beginning only - then followed a lot of tedious work: making the final identification of these objects in visible light and measuring the distance (i.e., redshift [3]) of the cluster candidates. The determination of the redshift was done by means of observations with several telescopes at the ESO La Silla Observatory in Chile, from 1992 to 1999. The brighter objects were observed with the ESO 1.5-m and the ESO/MPG 2.2-m telescopes, while for the more distant and fainter objects, the ESO 3.6-m telescope was used. Carried out at these telescopes, the 12 year-long programme is known to astronomers as the REFLEX (ROSAT-ESO Flux Limited X-ray) Cluster Survey. It has now been concluded with the publication of a unique catalogue with the characteristics of the 447 brightest X-ray clusters of galaxies in the southern sky. Among these, more than half the clusters were discovered during this survey. Constraining the dark matter content ESO PR Photo 18d/04 ESO PR Photo 18d/04 Constraints on Cosmological Parameters [Preview - JPEG: 400 pix x 572 - 37k] [Normal - JPEG: 800 x 1143 pix - 265k] Caption: PR Photo 18d demonstrates the current observational constraints on the cosmic density of all matter including dark matter (Ωm) and the dark energy (ΩΛ) relative to the density of a critical-density Universe (i.e., an expanding Universe which approaches zero expansion asymptotically after an infinite time and has a flat geometry). All three observational tests by means of supernovae (green), the cosmic microwave background (blue) and galaxy clusters converge at a Universe around Ωm ~ 0.3 and ΩΛ ~ 0.7. The dark red region for the galaxy cluster determination corresponds to 95% certainty (2-sigma statistical deviation) when assuming good knowledge of all other cosmological parameters, and the light red region assumes a minimum knowledge. For the supernovae and WMAP results, the inner and outer regions corespond to 68% (1-sigma) and 95% certainty, respectively. References: Schuecker et al. 2003, A&A, 398, 867 (REFLEX); Tonry et al. 2003, ApJ, 594, 1 (supernovae); Riess et al. 2004, ApJ, 607, 665 (supernovae) Galaxy clusters are far from being evenly distributed in the Universe. Instead, they tend to conglomerate into even larger structures, "super-clusters". Thus, from stars which gather in galaxies, galaxies which congregate in clusters and clusters tying together in super-clusters, the Universe shows structuring on all scales, from the smallest to the largest ones. This is a relict of the very early (formation) epoch of the Universe, the so-called "inflationary" period. At that time, only a minuscule fraction of one second after the Big Bang, the tiny density fluctuations were amplified and over the eons, they gave birth to the much larger structures. Because of the link between the first fluctuations and the giant structures now observed, the unique REFLEX catalogue - the largest of its kind - allows astronomers to put considerable constraints on the content of the Universe, and in particular on the amount of dark matter that is believed to pervade it. Rather interestingly, these constraints are totally independent from all other methods so far used to assert the existence of dark matter, such as the study of very distant supernovae (see e.g. ESO PR 21/98) or the analysis of the Cosmic Microwave background (e.g. the WMAP satellite). In fact, the new REFLEX study is very complementary to the above-mentioned methods. The REFLEX team concludes that the mean density of the Universe is in the range 0.27 to 0.43 times the "critical density", providing the strongest constraint on this value up to now. When combined with the latest supernovae study, the REFLEX result implies that, whatever the nature of the dark energy is, it closely mimics a Universe with Einstein's cosmological constant. A giant puzzle The REFLEX catalogue will also serve many other useful purposes. With it, astronomers will be able to better understand the detailed processes that contribute to the heating of the gas in these clusters. It will also be possible to study the effect of the environment of the cluster on each individual galaxy. Moreover, the catalogue is a good starting point to look for giant gravitational lenses, in which a cluster acts as a giant magnifying lens, effectively allowing observations of the faintest and remotest objects that would otherwise escape detection with present-day telescopes. But, as Hans Böhringer says: "Perhaps the most important advantage of this catalogue is that the properties of each single cluster can be compared to the entire sample. This is the main goal of surveys: assembling the pieces of a gigantic puzzle to build the grander view, where every single piece then gains a new, more comprehensive meaning." More information The results presented in this Press Release will appear in the research journal Astronomy and Astrophysics ("The ROSAT-ESO Flux Limited X-ray (REFLEX) Galaxy Cluster Survey. V. The cluster catalogue" by H. Böhringer et al.; astro-ph/0405546). See also the REFLEX website.

21 CFR 892.2030 - Medical image digitizer.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Medical image digitizer. 892.2030 Section 892.2030 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED... Communications in Medicine (DICOM) Std., Joint Photographic Experts Group (JPEG) Std.). [63 FR 23387, Apr. 29...

21 CFR 892.2040 - Medical image hardcopy device.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Medical image hardcopy device. 892.2040 Section 892.2040 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES... Communications in Medicine (DICOM) Std., Joint Photographic Experts Group (JPEG) Std., Society of Motion Picture...

Multi-Class Classification for Identifying JPEG Steganography Embedding Methods

DTIC Science & Technology

2008-09-01

B.H. (2000). STEGANOGRAPHY: Hidden Images, A New Challenge in the Fight Against Child Porn . UPDATE, Volume 13, Number 2, pp. 1-4, Retrieved June 3...Other crimes involving the use of steganography include child pornography where the stego files are used to hide a predator’s location when posting

6 CFR 37.31 - Source document retention.

Code of Federal Regulations, 2014 CFR

2014-01-01

... keep digital images of source documents must retain the images for a minimum of ten years. (4) States... using digital imaging to retain source documents must store the images as follows: (1) Photo images must be stored in the Joint Photographic Experts Group (JPEG) 2000 standard for image compression, or a...

6 CFR 37.31 - Source document retention.

Code of Federal Regulations, 2012 CFR

2012-01-01

... keep digital images of source documents must retain the images for a minimum of ten years. (4) States... using digital imaging to retain source documents must store the images as follows: (1) Photo images must be stored in the Joint Photographic Experts Group (JPEG) 2000 standard for image compression, or a...

6 CFR 37.31 - Source document retention.

Code of Federal Regulations, 2010 CFR

2010-01-01

... keep digital images of source documents must retain the images for a minimum of ten years. (4) States... using digital imaging to retain source documents must store the images as follows: (1) Photo images must be stored in the Joint Photographic Experts Group (JPEG) 2000 standard for image compression, or a...

6 CFR 37.31 - Source document retention.

Code of Federal Regulations, 2011 CFR

2011-01-01

... keep digital images of source documents must retain the images for a minimum of ten years. (4) States... using digital imaging to retain source documents must store the images as follows: (1) Photo images must be stored in the Joint Photographic Experts Group (JPEG) 2000 standard for image compression, or a...

6 CFR 37.31 - Source document retention.

Code of Federal Regulations, 2013 CFR

2013-01-01

... keep digital images of source documents must retain the images for a minimum of ten years. (4) States... using digital imaging to retain source documents must store the images as follows: (1) Photo images must be stored in the Joint Photographic Experts Group (JPEG) 2000 standard for image compression, or a...

JHelioviewer. Time-dependent 3D visualisation of solar and heliospheric data

NASA Astrophysics Data System (ADS)

Müller, D.; Nicula, B.; Felix, S.; Verstringe, F.; Bourgoignie, B.; Csillaghy, A.; Berghmans, D.; Jiggens, P.; García-Ortiz, J. P.; Ireland, J.; Zahniy, S.; Fleck, B.

2017-09-01

Context. Solar observatories are providing the world-wide community with a wealth of data, covering wide time ranges (e.g. Solar and Heliospheric Observatory, SOHO), multiple viewpoints (Solar TErrestrial RElations Observatory, STEREO), and returning large amounts of data (Solar Dynamics Observatory, SDO). In particular, the large volume of SDO data presents challenges; the data are available only from a few repositories, and full-disk, full-cadence data for reasonable durations of scientific interest are difficult to download, due to their size and the download rates available to most users. From a scientist's perspective this poses three problems: accessing, browsing, and finding interesting data as efficiently as possible. Aims: To address these challenges, we have developed JHelioviewer, a visualisation tool for solar data based on the JPEG 2000 compression standard and part of the open source ESA/NASA Helioviewer Project. Since the first release of JHelioviewer in 2009, the scientific functionality of the software has been extended significantly, and the objective of this paper is to highlight these improvements. Methods: The JPEG 2000 standard offers useful new features that facilitate the dissemination and analysis of high-resolution image data and offers a solution to the challenge of efficiently browsing petabyte-scale image archives. The JHelioviewer software is open source, platform independent, and extendable via a plug-in architecture. Results: With JHelioviewer, users can visualise the Sun for any time period between September 1991 and today; they can perform basic image processing in real time, track features on the Sun, and interactively overlay magnetic field extrapolations. The software integrates solar event data and a timeline display. Once an interesting event has been identified, science quality data can be accessed for in-depth analysis. As a first step towards supporting science planning of the upcoming Solar Orbiter mission, JHelioviewer offers a virtual camera model that enables users to set the vantage point to the location of a spacecraft or celestial body at any given time.

How to Become a Star

NASA Astrophysics Data System (ADS)

2001-01-01

ESO Telescopes Provide Most Detailed View Ever Into a Dark Cloud Summary How do stars like our Sun come into being? Which fundamental processes are responsible for transforming a dark and diffuse interstellar cloud of gas and dust into a much denser, shining object? Astronomers have just taken an important step towards answering this fundamental question. Based on the most detailed study ever made of the internal structure of a small interstellar cloud, three scientists from ESO and the USA [1] have found that it is apparently on the verge of becoming unstable - and thus in the stage immediately preceding a dramatic collapse into a dense and hot, low-mass star. Interestingly, the current structure of this cloud, a "Bok globule" known as Barnard 68 (B68) [2], is governed by the same basic physics as is that of a star. The cloud is obviously in a temporary state of near-equilibrium, where the inward force of gravity caused by its mass more or less balances that of the outward pressure due to its temperature. But this situation may not last long. The astronomers believe that this particular cloud, together with some others in the same galactic neighbourhood, constitute the few resistent remains of a much larger cloud that has disappeared due to the influence of strong stellar winds and ultraviolet radiation from young and heavy stars as well as supernova explosions. The new and unique insight into the pre-collapse phase of the complicated process of stellar birth is based on observations made with ESO telescopes at the La Silla and Paranal observatories in Chile. PR Photo 02a/01 : The Bok Globule B68 , as seen in visual light. PR Photo 02b/01 : Looking through the Bok Globule B68 . PR Photo 02c/01 : A comparison of the visual and infrared views of the Bok Globule B68 . From Dark Clouds to Stars Astronomers have known for some time that stars like our Sun are formed from interstellar clouds of gas and dust. When they contract, the interior temperature rises. If the cloud is sufficiently heavy, it will become so hot at the centre that energy-producing nuclear processes ignite. After a while, the central regions of the cloud reach equilibrium and a new star is born. Planets are formed from condensations in the surrounding material as this collects in a circumstellar disk. A good understanding of the origin of stars and planetary systems, like our own solar system, is therefore intimately connected to a detailed knowledge about the conditions in the cold interiors of dark clouds in interstellar space. However, such clouds are highly opaque and their physical structure has remained a mystery for as long as we have known about their existence. The following phases of stellar evolution are much better known and some scientists therefore refer to these very earliest stages as the "missing link" in our current picture of star formation. Finely balanced equilibrium The present results are changing this situation. By means of a new and straightforward observational technique, it has now been possible to explore the detailed structure of a nearby cloud. It is found to be quite simple, with the mean density steadily increasing towards the centre. In fact, the way this happens (referred to as the cloud's "density profile") is exactly as expected in an isolated gas sphere at a certain temperature in which the inward force of gravity is finely balanced against the internal thermal pressure. With this clear physical description it is now possible to determine with unprecedented precision (approx. 3%) the fundamental parameters of the cloud, such as its distance and gas-to-dust ratio. ESO astronomer João Alves from the team is content: "These measurements constitute a major breakthrough in the understanding of dark clouds. For the first time, the internal structure of a dark cloud has been specified with a detail approaching that which characterizes our knowledge of stellar interiors". Seeing light through the dark The observational technique that has led to the new result is straightforward but rather difficult to apply to dark clouds. It is based on measurements of the light from stars that are located behind the cloud. When this light passes through the cloud, it is absorbed and scattered by the dust inside. The effect depends on the colour (wavelength) and the background stars will appear redder than they really are . It is also proportional to the amount of obscuring material and is therefore largest for stars that are situated behind the cloud's centre. By measuring the degree of this "reddening" experienced by stars seen through different areas of the cloud, it is thus possible to chart the distribution of dust in the cloud . The finer the net of background stars is, the more detailed this map will be and the better the information about the internal structure of the cloud. And that is exactly the problem. Even small clouds are so opaque that very few background stars can be seen through them. Only large telescopes and extremely sensitive instruments are able to observe a sufficient number of stars in order to produce significant results. In particular, until now it has never been possible to map the densest, central areas of a dark cloud. The structure of Barnard 68 ESO PR Photo 02a/01 ESO PR Photo 02a/01 [Preview - JPEG:400 x 482 pix - 92k] [Normal - JPEG: 800 x 964 pix - 560k] [Hires - JPEG: 2296 x 2768 pix - 7.9M] ESO PR Photo 02b/01 ESO PR Photo 02b/01 [Preview - JPEG: 400 x 480 pix - 89k] [Normal - JPEG: 800 x 960 pix - 432k] [Hires - JPEG: 2301 x 2762 pix - 7.3M] ESO PR Photo 02c/01 ESO PR Photo 02c/01 [Preview - JPEG: 624 x 400 pix - 88k] [Normal - JPEG: 1247 x 800 pix - 496k] [Hires - JPEG: 2828 x 1814 pix - 5.6M] Caption : PR Photo 02a/01 shows a colour composite of visible and near-infrared images of the dark cloud Barnard 68 . It was obtained with the 8.2-m VLT ANTU telescope and the multimode FORS1 instrument in March 1999. At these wavelengths, the small cloud is completely opaque because of the obscuring effect of dust particles in its interior. PR Photo 02b/01 is a false-colour composite based on a visible (here rendered as blue), a near-infrared (green) and an infrared (red) image. Since the light from stars behind the cloud is only visible at the longest (infrared) wavelengths, they appear red. In PR Photo 02c/01 , the central area of these two photos may be directly compared. Technical information about these photos is available below. At a distance of only 410 light-years, Barnard 68 is one of the nearest dark clouds. Its size is about 12,500 AU (= 2 million million km; 1 Astronomical Unit [AU] = 150 million km), or just about the same as the so-called "Oort Cloud" of long-period comets that surrounds the solar system. The temperature of Barnard 68 is 16 Kelvin (-257 °C) and the pressure at its boundary is 0.0025 nPa, or about 10 times higher than in the interstellar medium (but still 40,000 million million times less than the atmospheric pressure at the Earth's surface!). The total mass of the cloud is about twice that of the Sun. A new investigation of Barnard 68 was carried out by means of instruments at the 3.58-m New Technology Telescope (NTT) at La Silla and the Very Large Telescope (VLT) at Paranal. Long exposures revealed a total of about 3700 background stars (of which over 1000 can only be seen at infrared wavelengths), cf. PR Photos 02a-c/01 . Careful measurements of the colours of these stars and hence, the degree of obscuration, allowed the most finely sampled (in more than 1000 individual areas) and most accurate mapping of the dust distribution inside a dark cloud ever performed. In order to further increase the accuracy, the mean dust density was measured in concentric circles around the centre - this resulted in a very accurate determination of the change in dust density with the distance from the centre. It was found that this dependance is almost exactly as that predicted for a sphere in which the opposite forces of gravity and internal pressure closely balance each other. Nevertheless, it is also evident that Barnard 68 is only marginally stable and is on the verge of collapse. The origin of Barnard 68 This first-ever, detailed characterization of a dark interstellar cloud that is currently in the stage immediately preceding collapse and subsequent star formation constitutes a very important step towards a better understanding of earliest phases of the stellar life cycle. The astronomers suggest that Barnard 68 (and its neighbouring brethren, the dark clouds Barnard 69, 70 and 72) may be the precursors of an isolated and sparsely populated association of low-mass solar-like stars. However, where did these clouds come from? João Alves thinks he and his colleagues know the answer: "It is most likely that they are the remnant cores of particularly resistent parts of a larger cloud. By now, most of it has been 'eaten away' because of strong attrition caused by ultraviolet radiation and stellar winds from hot massive stars or 'storms' from exploding supernovae". He adds: "Our new observations show that objects with just the right mass like Barnard 68 can reach a temporary equilibrium and survive for some time before they begin to collapse." The team is now eager to continue this type of investigation on other dark clouds. More information The research described in this Press Release is reported in a research article ("Seeing Light Through the Dark: Measuring the Internal Structure of a Cold Dark Cloud"), that appears in the international research jounal Nature on Thursday, January 11, 2001. Notes [1]: The team consists of João F. Alves (ESO-Garching, Germany), Charles J. Lada (Harvard-Smithsonian Center for Astrophysics, Cambridge, Mass. USA) and Elizabeth A. Lada (University of Florida, Gainsville, Fl., USA). [2]: The Dutch astronomer Bart Bok (1906-1983) studied the dark clouds in the Milky Way and described the small, compact ones as "globules". The early stages of the present investigation of Barnard 68 were presented in ESO PR Photos 29a-c/99 , with more background information about this cloud. Technical information about the photos PR Photo 02a/01 of the sky area of Barnard 68 is based on three frames through B- (440 nm = 0.44 µm - here rendered as blue), V- (0.55 µm - green) and I-band 0.90 µm - red) optical filters, as obtained with FORS1 instrument at the VLT ANTU telescope on March 27, 1999. The field measures 6.8 x 6.8 arcmin 2 (2048 x 2048 pix 2 a 0.20 arcsec. PR Photo 02b/01 is a false-colour composite based on B- (wavelength 0.44 µm - 1.5 min; here rendered as blue), I- (wavelength 0.85 µm - 1.5 min; green), and Ks-filters (2.16 µm - 30 min; red), respectively. The B and I images were obtained on March 1999, with the FORS1 instrument at the 8.2-m VLT ANTU. The Ks image was obtained in March 1999 with the SOFI instrument at the ESO 3.58-m New Technology Telescope (NTT) at La Silla. The sky field measures about 4.9 x 4.9 arcmin 2 (1024 x 1024 pixels 2 a 0.29 arcsec). North is up and East is left. PR Photo 02c/01 allows a direct comparison between the two views.

Java Image I/O for VICAR, PDS, and ISIS

NASA Technical Reports Server (NTRS)

Deen, Robert G.; Levoe, Steven R.

2011-01-01

This library, written in Java, supports input and output of images and metadata (labels) in the VICAR, PDS image, and ISIS-2 and ISIS-3 file formats. Three levels of access exist. The first level comprises the low-level, direct access to the file. This allows an application to read and write specific image tiles, lines, or pixels and to manipulate the label data directly. This layer is analogous to the C-language "VICAR Run-Time Library" (RTL), which is the image I/O library for the (C/C++/Fortran) VICAR image processing system from JPL MIPL (Multimission Image Processing Lab). This low-level library can also be used to read and write labeled, uncompressed images stored in formats similar to VICAR, such as ISIS-2 and -3, and a subset of PDS (image format). The second level of access involves two codecs based on Java Advanced Imaging (JAI) to provide access to VICAR and PDS images in a file-format-independent manner. JAI is supplied by Sun Microsystems as an extension to desktop Java, and has a number of codecs for formats such as GIF, TIFF, JPEG, etc. Although Sun has deprecated the codec mechanism (replaced by IIO), it is still used in many places. The VICAR and PDS codecs allow any program written using the JAI codec spec to use VICAR or PDS images automatically, with no specific knowledge of the VICAR or PDS formats. Support for metadata (labels) is included, but is format-dependent. The PDS codec, when processing PDS images with an embedded VIAR label ("dual-labeled images," such as used for MER), presents the VICAR label in a new way that is compatible with the VICAR codec. The third level of access involves VICAR, PDS, and ISIS Image I/O plugins. The Java core includes an "Image I/O" (IIO) package that is similar in concept to the JAI codec, but is newer and more capable. Applications written to the IIO specification can use any image format for which a plug-in exists, with no specific knowledge of the format itself.

Determining the Completeness of the Nimbus Meteorological Data Archive

NASA Technical Reports Server (NTRS)

Johnson, James; Moses, John; Kempler, Steven; Zamkoff, Emily; Al-Jazrawi, Atheer; Gerasimov, Irina; Trivedi, Bhagirath

2011-01-01

NASA launched the Nimbus series of meteorological satellites in the 1960s and 70s. These satellites carried instruments for making observations of the Earth in the visible, infrared, ultraviolet, and microwave wavelengths. The original data archive consisted of a combination of digital data written to 7-track computer tapes and on various film media. Many of these data sets are now being migrated from the old media to the GES DISC modern online archive. The process involves recovering the digital data files from tape as well as scanning images of the data from film strips. Some of the challenges of archiving the Nimbus data include the lack of any metadata from these old data sets. Metadata standards and self-describing data files did not exist at that time, and files were written on now obsolete hardware systems and outdated file formats. This requires creating metadata by reading the contents of the old data files. Some digital data files were corrupted over time, or were possibly improperly copied at the time of creation. Thus there are data gaps in the collections. The film strips were stored in boxes and are now being scanned as JPEG-2000 images. The only information describing these images is what was written on them when they were originally created, and sometimes this information is incomplete or missing. We have the ability to cross-reference the scanned images against the digital data files to determine which of these best represents the data set from the various missions, or to see how complete the data sets are. In this presentation we compared data files and scanned images from the Nimbus-2 High-Resolution Infrared Radiometer (HRIR) for September 1966 to determine whether the data and images are properly archived with correct metadata.

Quantization Distortion in Block Transform-Compressed Data

NASA Technical Reports Server (NTRS)

Boden, A. F.

1995-01-01

The popular JPEG image compression standard is an example of a block transform-based compression scheme; the image is systematically subdivided into block that are individually transformed, quantized, and encoded. The compression is achieved by quantizing the transformed data, reducing the data entropy and thus facilitating efficient encoding. A generic block transform model is introduced.

Compression of multispectral fluorescence microscopic images based on a modified set partitioning in hierarchal trees

NASA Astrophysics Data System (ADS)

Mansoor, Awais; Robinson, J. Paul; Rajwa, Bartek

2009-02-01

Modern automated microscopic imaging techniques such as high-content screening (HCS), high-throughput screening, 4D imaging, and multispectral imaging are capable of producing hundreds to thousands of images per experiment. For quick retrieval, fast transmission, and storage economy, these images should be saved in a compressed format. A considerable number of techniques based on interband and intraband redundancies of multispectral images have been proposed in the literature for the compression of multispectral and 3D temporal data. However, these works have been carried out mostly in the elds of remote sensing and video processing. Compression for multispectral optical microscopy imaging, with its own set of specialized requirements, has remained under-investigated. Digital photography{oriented 2D compression techniques like JPEG (ISO/IEC IS 10918-1) and JPEG2000 (ISO/IEC 15444-1) are generally adopted for multispectral images which optimize visual quality but do not necessarily preserve the integrity of scientic data, not to mention the suboptimal performance of 2D compression techniques in compressing 3D images. Herein we report our work on a new low bit-rate wavelet-based compression scheme for multispectral fluorescence biological imaging. The sparsity of signicant coefficients in high-frequency subbands of multispectral microscopic images is found to be much greater than in natural images; therefore a quad-tree concept such as Said et al.'s SPIHT1 along with correlation of insignicant wavelet coefficients has been proposed to further exploit redundancy at high-frequency subbands. Our work propose a 3D extension to SPIHT, incorporating a new hierarchal inter- and intra-spectral relationship amongst the coefficients of 3D wavelet-decomposed image. The new relationship, apart from adopting the parent-child relationship of classical SPIHT, also brought forth the conditional "sibling" relationship by relating only the insignicant wavelet coefficients of subbands at the same level of decomposition. The insignicant quadtrees in dierent subbands in the high-frequency subband class are coded by a combined function to reduce redundancy. A number of experiments conducted on microscopic multispectral images have shown promising results for the proposed method over current state-of-the-art image-compression techniques.

Impact of JPEG2000 compression on spatial-spectral endmember extraction from hyperspectral data

NASA Astrophysics Data System (ADS)

Martín, Gabriel; Ruiz, V. G.; Plaza, Antonio; Ortiz, Juan P.; García, Inmaculada

2009-08-01

Hyperspectral image compression has received considerable interest in recent years. However, an important issue that has not been investigated in the past is the impact of lossy compression on spectral mixture analysis applications, which characterize mixed pixels in terms of a suitable combination of spectrally pure spectral substances (called endmembers) weighted by their estimated fractional abundances. In this paper, we specifically investigate the impact of JPEG2000 compression of hyperspectral images on the quality of the endmembers extracted by algorithms that incorporate both the spectral and the spatial information (useful for incorporating contextual information in the spectral endmember search). The two considered algorithms are the automatic morphological endmember extraction (AMEE) and the spatial spectral endmember extraction (SSEE) techniques. Experimental results are conducted using a well-known data set collected by AVIRIS over the Cuprite mining district in Nevada and with detailed ground-truth information available from U. S. Geological Survey. Our experiments reveal some interesting findings that may be useful to specialists applying spatial-spectral endmember extraction algorithms to compressed hyperspectral imagery.

Phoenix Telemetry Processor

NASA Technical Reports Server (NTRS)

Stanboli, Alice

2013-01-01

Phxtelemproc is a C/C++ based telemetry processing program that processes SFDU telemetry packets from the Telemetry Data System (TDS). It generates Experiment Data Records (EDRs) for several instruments including surface stereo imager (SSI); robotic arm camera (RAC); robotic arm (RA); microscopy, electrochemistry, and conductivity analyzer (MECA); and the optical microscope (OM). It processes both uncompressed and compressed telemetry, and incorporates unique subroutines for the following compression algorithms: JPEG Arithmetic, JPEG Huffman, Rice, LUT3, RA, and SX4. This program was in the critical path for the daily command cycle of the Phoenix mission. The products generated by this program were part of the RA commanding process, as well as the SSI, RAC, OM, and MECA image and science analysis process. Its output products were used to advance science of the near polar regions of Mars, and were used to prove that water is found in abundance there. Phxtelemproc is part of the MIPL (Multi-mission Image Processing Laboratory) system. This software produced Level 1 products used to analyze images returned by in situ spacecraft. It ultimately assisted in operations, planning, commanding, science, and outreach.

Feeling the Heat

NASA Astrophysics Data System (ADS)

2004-05-01

Successful "First Light" for the Mid-Infrared VISIR Instrument on the VLT Summary Close to midnight on April 30, 2004, intriguing thermal infrared images of dust and gas heated by invisible stars in a distant region of our Milky Way appeared on a computer screen in the control room of the ESO Very Large Telescope (VLT). These images mark the successful "First Light" of the VLT Imager and Spectrometer in the InfraRed (VISIR), the latest instrument to be installed on this powerful telescope facility at the ESO Paranal Observatory in Chile. The event was greeted with a mixture of delight, satisfaction and some relief by the team of astronomers and engineers from the consortium of French and Dutch Institutes and ESO who have worked on the development of VISIR for around 10 years [1]. Pierre-Olivier Lagage (CEA, France), the Principal Investigator, is content : "This is a wonderful day! A result of many years of dedication by a team of engineers and technicians, who can today be proud of their work. With VISIR, astronomers will have at their disposal a great instrument on a marvellous telescope. And the gain is enormous; 20 minutes of observing with VISIR is equivalent to a whole night of observing on a 3-4m class telescope." Dutch astronomer and co-PI Jan-Willem Pel (Groningen, The Netherlands) adds: "What's more, VISIR features a unique observing mode in the mid-infrared: spectroscopy at a very high spectral resolution. This will open up new possibilities such as the study of warm molecular hydrogen most likely to be an important component of our galaxy." PR Photo 16a/04: VISIR under the Cassegrain focus of the Melipal telescope PR Photo 16b/04: VISIR mounted behind the mirror of the Melipal telescope PR Photo 16c/04: Colour composite of the star forming region G333.6-0.2 PR Photo 16d/04: Colour composite of the Galactic Centre PR Photo 16e/04: The Ant Planetary Nebula at 12.8 μm PR Photo 16f/04: The starburst galaxy He2-10 at 11.3μm PR Photo 16g/04: High-resolution spectrum of G333.6-0.2 around 12.8μm PR Photo 16h/04: High-resolution spectrum of the Ant Planetary Nebula around 12.8μm From cometary tails to centres of galaxies The mid-infrared spectral region extends from a few to a few tens of microns in wavelength and provides a unique view of our Universe. Optical astronomy, that is astronomy at wavelengths to which our eyes are sensitive, is mostly directed towards light emitted by gas, be it in stars, nebulae or galaxies. Mid-Infrared astronomy, however, allows us to also detect solid dust particles at temperatures of -200 to +300 °C. Dust is very abundant in the universe in many different environments, ranging from cometary tails to the centres of galaxies. This dust also often totally absorbs and hence blocks the visible light reaching us from such objects. Red light, and especially infrared light, can propagate much better in dust clouds. Many important astrophysical processes occur in regions of high obscuration by dust, most notably star formation and the late stages of their evolution, when stars that have burnt nearly all their fuel shed much of their outer layers and dust grains form in their "stellar wind". Stars are born in so-called molecular clouds. The proto-stars feed from these clouds and are shielded from the outside by them. Infrared is a tool - very much as ultrasound is for medical inspections - for looking into those otherwise hidden regions to study the stellar "embryos". It is thus crucial to also observe the Universe in the infrared and mid-infrared. Unfortunately, there are also infrared-emitting molecules in the Earth's atmosphere, e.g. water vapour, Nitric Oxides, Ozone, Methane. Because of these gases, the atmosphere is completely opaque at certain wavelengths, except in a few "windows" where the Earth's atmosphere is transparent. Even in these windows, however, the sky and telescope emit radiation in the infrared to an extent that observing in the mid-infrared at night is comparable to trying to do optical astronomy in daytime. Ground-based infrared astronomers have thus become extremely adept at developing special techniques called "chopping' and "nodding" for detecting the extremely faint astronomical signals against this unwanted bright background [3]. VISIR: an extremely complex instrument VISIR - the VLT Imager and Spectrometer in the InfraRed - is a complex multi-mode instrument designed to operate in the 10 and 20 μm atmospheric windows, i.e. at wavelengths up to about 40 times longer than visible light and to provide images as well as spectra at a wide range of resolving power up to ~ 30.000. It can sample images down to the diffraction limit of the 8.2-m Melipal telescope (0.27 arcsec at 10 μm wavelength, i.e. corresponding to a resolution of 500 m on the Moon), which is expected to be reached routinely due to the excellent seeing conditions experienced for a large fraction of the time at the VLT [2]. Because at room temperature the metal and glass of VISIR would emit strongly at exactly the same wavelengths and would swamp any faint mid-infrared astronomical signals, the whole VISIR instrument is cooled to a temperature close to -250° C and its two panoramic 256x256 pixel array detectors to even lower temperatures, only a few degrees above absolute zero. It is also kept in a vacuum tank to avoid the unavoidable condensation of water and icing which would otherwise occur. The complete instrument is mounted on the telescope and must remain rigid to within a few thousandths of a millimetre as the telescope moves to acquire and then track objects anywhere in the sky. Needless to say, this makes for an extremely complex instrument and explains the many years needed to develop and bring it to the telescope on the top of Paranal. VISIR also includes a number of important technological innovations, most notably its unique cryogenic motor drive systems comprising integrated stepper motors, gears and clutches whose shape is similar to that of the box of the famous French Camembert cheese. VISIR is mounted on Melipal ESO PR Photo 16a/04 ESO PR Photo 16a/04 VISIR under the Cassegrain focus of the Melipal telescope [Preview - JPEG: 400 x 476 pix - 271k] [Normal - JPEG: 800 x 951 pix - 600k] ESO PR Photo 16b/04 ESO PR Photo 16b/04 VISIR mounted behind the mirror of the Melipal telescope [Preview - JPEG: 400 x 603 pix - 366k] [Normal - JPEG: 800 x 1206 pix - 945k] Caption: ESO PR Photo 16a/04 shows VISIR about to be attached at the Cassegrain focus of the Melipal telescope. On ESO PR Photo 16b/04, VISIR appears much smaller once mounted behind the enormous 8.2-m diameter mirror of the Melipal telescope. The fully integrated VISIR plus all the associated equipment (amounting to a total of around 8 tons) was air freighted from Paris to Santiago de Chile and arrived at the Paranal Observatory on 25th March after a subsequent 1500 km journey by road. Following tests to confirm that nothing had been damaged, VISIR was mounted on the third VLT telescope "Melipal" on April 27th. PR Photos 16a/04 and 16b/04 show the approximately 1.6 tons of VISIR being mounted at the Cassegrain focus, below the 8.2-m main mirror. First technical light on a star was achieved on April 29th, shortly after VISIR had been cooled down to its operating temperature. This allowed to proceed with the necessary first basic operations, including focusing the telescope, and tests. While telescope focusing was one of the difficult and frequent tasks faced by astronomers in the past, this is no longer so with the active optics feature of the VLT telescopes which, in principle, has to be focused only once after which it will forever be automatically kept in perfect focus. First images and spectra from VISIR ESO PR Photo 16c/04 ESO PR Photo 16c/04 Colour composite of the star forming region G333.6-0.2 [Preview - JPEG: 400 x 477 pix - 78k] [Normal - JPEG: 800 x 954 pix - 191k] ESO PR Photo 16d/04 ESO PR Photo 16d/04 Colour composite of the Galactic Centre [Preview - JPEG: 400 x 478 pix - 159k] [Normal - JPEG: 800 x 955 pix - 348k] Caption: ESO PR Photo 16c/04 is a colour composite image of the visually obscured G333.6-0.2 star-forming region at a distance of nearly 10,000 light-years in our Milky Way galaxy. This image was made by combining three digital images of the intensity of the infrared emission at wavelengths of 11.3μm (one of the Polycyclic Aromatic Hydrocarbon features, coded blue), 12.8 μm (an emission line of [NeII], coded green) and 19μm (warm dust emission, coded red). Each pixel subtends 0.127 arcsec and the total field is ~ 33 x 33 arcsec with North at the top and East to the left. The total integration times were 13 seconds at the shortest and 35 seconds at the longer wavelengths. The brighter spots locate regions where the dust, which obscures all the visible light, has been heated by recently formed stars. ESO PR Photo 16d/04 shows another colour composite, this time of the Galactic Centre at a distance of about 30,000 light-years. It was made by combining images in filters centred at 8.6μm (Polycyclic Aromatic Hydrocarbon molecular feature - coded blue), 12.8μm ([NeII] - coded green) and 19.5μm (coded red). Each pixel subtends 0.127 arcsec and the total field is ~ 33 x 33 arcsec with North at the top and East to the left. Total integration times were 300, 160 and 300 s for the 3 filters, respectively. This region is very rich, full of stars, dust, ionised and molecular gas. One of the scientific goals will be to detect and monitor the signal from the black hole at the centre of our galaxy. ESO PR Photo 16e/04 ESO PR Photo 16e/04 The Ant Planetary Nebula at 12.8 μm [Preview - JPEG: 400 x 477 pix - 77k] [Normal - JPEG: 800 x 954 pix - 182k] Caption: ESO PR Photo 16e/04 is an image of the "Ant" Planetary Nebula (Mz3) in the narrow-band filter centred at wavelength 12.8 μm. The scale is 0.127 arcsec/pixel and the total field-of-view is 33 x 33 arcsec, with North at the top and East to the left. The total integration time was 200 seconds. Note the diffraction rings around the central star which confirm that the maximum spatial resolution possible with the 8.2-m telescope is being achieved. ESO PR Photo 16f/04 ESO PR Photo 16f/04 The starburst galaxy He2-10 at 11.3μm [Preview - JPEG: 400 x 477 pix - 69k] [Normal - JPEG: 800 x 954 pix - 172k] Caption: ESO PR Photo 16f/04 is an image at wavelength 11.3 μm of the "nearby" (distance about 30 million light-years) blue compact galaxy He2-10, which is actively forming stars. The scale is 0.127 arcsec per pixel and the full field covers 15 x 15 arcsec with North at the top and East on the left. The total integration time for this observation is one hour. Several star forming regions are detected, as well as a diffuse emission, which was unknown until these VISIR observations. The star-forming regions on the left of the image are not visible in optical images. ESO PR Photo 16g/04 ESO PR Photo 16g/04 High-resolution spectrum of G333.6-0.2 around 12.8 μm [Preview - JPEG: 652 x 400 pix - 123k] [Normal - JPEG: 1303 x 800 pix - 277k] Caption: ESO PR Photo 16g/04 is a reproduction of a high-resolution spectrum of the Ne II line (ionised Neon) at 12.8135 μm of the star-forming region G333.6-0.2 shown in ESO PR Photo 16c/04. This spectrum reveals the complex motions of the ionized gas in this region. The images are 256 x 256 frames of 50 x 50 micron pixels. The "field" direction is horizontal, with total slit length of 32.5 arcsec; North is left and South is to the right. The dispersion direction is vertical, with the wavelength increasing downward. The total integration time was 80 sec. ESO PR Photo 16h/04 ESO PR Photo 16h/04 High-resolution spectrum of the Ant nebula around 12.8 μm [Preview - JPEG: 610 x 400 pix - 354k] [Normal - JPEG: 1219 x 800 pix - 901k] Caption: ESO PR Photo 16h/04 is a reproduction of a high-resolution spectrum of the Ne II line (ionised Neon) at 12.8135 microns of the Ant Planetary Nebula, also known as Mz-3, shown in ESO PR Photo 16d/04. The technical details are similar to ESO PR Photo 16g/04. The total integration time was 120 sec. The photos above resulted from some of the first observational tests with VISIR. PR Photo 16c/04 shows the scientific "First Light" image, obtained one day later on April 30th, of a visually obscured star forming region nearly 10,000 light-years away in our galaxy, the Milky Way. The picture shown here is a false-colour image made by combining three digital images of the intensity of the infrared emission from this region at wavelengths of 11.3 μm (one of the Polycyclic Aromatic Hydrocarbon - PAH - features), 12.8 μm (an emission line of ionised neon) and 19 μm (cool dust emission). Ten times sharper Until now, an elegant way to avoid the problems caused by the emission and absorption of the atmosphere was to fly infrared telescopes on satellites as was done in the highly successful IRAS and ISO missions and currently the Spitzer observatory. For both technical and cost reasons, however, such telescopes have so far been limited to only 60-85 cm in diameter. While very sensitive therefore, the spatial resolution (sharpness) delivered by these telescopes is 10 times worse than that of the 8.2-m diameter VLT telescopes. They have also not been equipped with the very high spectral resolution capability, a feature of the VISIR instrument, which is thus expected to remain the instrument of choice for a wide range of studies for many years to come despite the competition from space. More information A corresponding [1]: The consortium of institutes responsible for building the VISIR instrument under contract to ESO comprises the CEA/DSM/DAPNIA, Saclay, France - led by the Principal Investigator (PI), Pierre-Olivier Lagage and the Netherlands Foundation for Research in Astronomy/ASTRON - (Dwingeloo, The Netherlands) with Jan-Willem Pel from Groningen University as Co-PI for the spectrometer. [2]: Stellar radiation on its way to the observer is also affected by the turbulence of the Earth's atmosphere. This is the effect which makes the stars twinkle for the human eye. While the general public enjoys this phenomenon as something that makes the night sky interesting and may be entertaining, the twinkling is a major concern for amateur and professional astronomers, as it smears out the optical images. Infrared radiation is less affected by this effect. Therefore an instrument like VISIR can make full use of the extremely high optical quality of modern telescopes, like the VLT. [3]: Observations from the ground at wavelengths of 10 to 20 μm are particularly difficult because this is the wavelength region in which both the telescope and the atmosphere emits most strongly. In order to minimize its effect, the images shown here were made by tilting the telescope secondary mirror every few seconds (chopping) and the whole telescope every minute (nodding) so that this unwanted telescope and sky background emission could be measured and subtracted from the science images faster than it varies.

Image Quality Assessment of JPEG Compressed Mars Science Laboratory Mastcam Images using Convolutional Neural Networks

NASA Astrophysics Data System (ADS)

Kerner, H. R.; Bell, J. F., III; Ben Amor, H.

2017-12-01

The Mastcam color imaging system on the Mars Science Laboratory Curiosity rover acquires images within Gale crater for a variety of geologic and atmospheric studies. Images are often JPEG compressed before being downlinked to Earth. While critical for transmitting images on a low-bandwidth connection, this compression can result in image artifacts most noticeable as anomalous brightness or color changes within or near JPEG compression block boundaries. In images with significant high-frequency detail (e.g., in regions showing fine layering or lamination in sedimentary rocks), the image might need to be re-transmitted losslessly to enable accurate scientific interpretation of the data. The process of identifying which images have been adversely affected by compression artifacts is performed manually by the Mastcam science team, costing significant expert human time. To streamline the tedious process of identifying which images might need to be re-transmitted, we present an input-efficient neural network solution for predicting the perceived quality of a compressed Mastcam image. Most neural network solutions require large amounts of hand-labeled training data for the model to learn the target mapping between input (e.g. distorted images) and output (e.g. quality assessment). We propose an automatic labeling method using joint entropy between a compressed and uncompressed image to avoid the need for domain experts to label thousands of training examples by hand. We use automatically labeled data to train a convolutional neural network to estimate the probability that a Mastcam user would find the quality of a given compressed image acceptable for science analysis. We tested our model on a variety of Mastcam images and found that the proposed method correlates well with image quality perception by science team members. When assisted by our proposed method, we estimate that a Mastcam investigator could reduce the time spent reviewing images by a minimum of 70%.

Fourth Light at Paranal!

NASA Astrophysics Data System (ADS)

2000-09-01

VLT YEPUN Joins ANTU, KUEYEN and MELIPAL It was a historical moment last night (September 3 - 4, 2000) in the VLT Control Room at the Paranal Observatory , after nearly 15 years of hard work. Finally, four teams of astronomers and engineers were sitting at the terminals - and each team with access to an 8.2-m telescope! From now on, the powerful "Paranal Quartet" will be observing night after night, with a combined mirror surface of more than 210 m 2. And beginning next year, some of them will be linked to form part of the unique VLT Interferometer with unparalleled sensitivity and image sharpness. YEPUN "First Light" Early in the evening, the fourth 8.2-m Unit Telescope, YEPUN , was pointed to the sky for the first time and successfully achieved "First Light". Following a few technical exposures, a series of "first light" photos was made of several astronomical objects with the VLT Test Camera. This instrument was also used for the three previous "First Light" events for ANTU ( May 1998 ), KUEYEN ( March 1999 ) and MELIPAL ( January 2000 ). These images served to evaluate provisionally the performance of the new telescope, mainly in terms of mechanical and optical quality. The ESO staff were very pleased with the results and pronounced YEPUN fit for the subsequent commissioning phase. When the name YEPUN was first given to the fourth VLT Unit Telescope, it was supposed to mean "Sirius" in the Mapuche language. However, doubts have since arisen about this translation and a detailed investigation now indicates that the correct meaning is "Venus" (as the Evening Star). For a detailed explanation, please consult the essay On the Meaning of "YEPUN" , now available at the ESO website. The first images At 21:39 hrs local time (01:39 UT), YEPUN was turned to point in the direction of a dense Milky Way field, near the border between the constellations Sagitta (The Arrow) and Aquila (The Eagle). A guide star was acquired and the active optics system quickly optimized the mirror system. At 21:44 hrs (01:44 UT), the Test Camera at the Cassegrain focus within the M1 mirror cell was opened for 30 seconds, with the planetary nebula Hen 2-428 in the field. The resulting "First Light" image was immediately read out and appeared on the computer screen at 21:45:53 hrs (01:45:53 UT). "Not bad! - "Very nice!" were the first, "business-as-usual"-like comments in the room. The zenith distance during this observation was 44° and the image quality was measured as 0.9 arcsec, exactly the same as that registered by the Seeing Monitoring Telescope outside the telescope building. There was some wind. ESO PR Photo 22a/00 ESO PR Photo 22a/00 [Preview - JPEG: 374 x 400 pix - 128k] [Normal - JPEG: 978 x 1046 pix - 728k] Caption : ESO PR Photo 22a/00 shows a colour composite of some of the first astronomical exposures obtained by YEPUN . The object is the planetary nebula Hen 2-428 that is located at a distance of 6,000-8,000 light-years and seen in a dense sky field, only 2° from the main plane of the Milky Way. As other planetary nebulae, it is caused by a dying star (the bluish object at the centre) that shreds its outer layers. The image is based on exposures through three optical filtres: B(lue) (10 min exposure, seeing 0.9 arcsec; here rendered as blue), V(isual) (5 min; 0.9 arcsec; green) and R(ed) (3 min; 0.9 arcsec; red). The field measures 88 x 78 arcsec 2 (1 pixel = 0.09 arcsec). North is to the lower right and East is to the lower left. The 5-day old Moon was about 90° away in the sky that was accordingly bright. The zenith angle was 44°. The ESO staff then proceeded to take a series of three photos with longer exposures through three different optical filtres. They have been combined to produce the image shown in ESO PR Photo 22a/00 . More astronomical images were obtained in sequence, first of the dwarf galaxy NGC 6822 in the Local Group (see PR Photo 22f/00 below) and then of the spiral galaxy NGC 7793 . All 8.2-m telescopes now in operation at Paranal The ESO Director General, Catherine Cesarsky , who was present on Paranal during this event, congratulated the ESO staff to the great achievement, herewith bringing a major phase of the VLT project to a successful end. She was particularly impressed by the excellent optical quality that was achieved at this early moment of the commissioning tests. A measurement showed that already now, 80% of the light is concentrated within 0.22 arcsec. The manager of the VLT project, Massimo Tarenghi , was very happy to reach this crucial project milestone, after nearly fifteen years of hard work. He also remarked that with the M2 mirror already now "in the active optics loop", the telescope was correctly compensating for the somewhat mediocre atmospheric conditions on this night. The next major step will be the "first light" for the VLT Interferometer (VLTI) , when the light from two Unit Telescopes is combined. This event is expected in the middle of next year. Impressions from the YEPUN "First Light" event First Light for YEPUN - ESO PR VC 06/00 ESO PR Video Clip 06/00 "First Light for YEPUN" (5650 frames/3:46 min) [MPEG Video+Audio; 160x120 pix; 7.7Mb] [MPEG Video+Audio; 320x240 pix; 25.7 Mb] [RealMedia; streaming; 34kps] [RealMedia; streaming; 200kps] ESO Video Clip 06/00 shows sequences from the Control Room at the Paranal Observatory, recorded with a fixed TV-camera in the evening of September 3 at about 23:00 hrs local time (03:00 UT), i.e., soon after the moment of "First Light" for YEPUN . The video sequences were transmitted via ESO's dedicated satellite communication link to the Headquarters in Garching for production of the clip. It begins at the moment a guide star is acquired to perform an automatic "active optics" correction of the mirrors; the associated explanation is given by Massimo Tarenghi (VLT Project Manager). The first astronomical observation is performed and the first image of the planetary nebula Hen 2-428 is discussed by the ESO Director General, Catherine Cesarsky . The next image, of the nearby dwarf galaxy NGC 6822 , arrives and is shown and commented on by the ESO Director General. Finally, Massimo Tarenghi talks about the next major step of the VLT Project. The combination of the lightbeams from two 8.2-m Unit Telescopes, planned for the summer of 2001, will mark the beginning of the VLT Interferometer. ESO Press Photo 22b/00 ESO Press Photo 22b/00 [Preview; JPEG: 400 x 300; 88k] [Full size; JPEG: 1600 x 1200; 408k] The enclosure for the fourth VLT 8.2-m Unit Telescope, YEPUN , photographed at sunset on September 3, 2000, immediately before "First Light" was successfully achieved. The upper part of the mostly subterranean Interferometric Laboratory for the VLTI is seen in front. (Digital Photo). ESO Press Photo 22c/00 ESO Press Photo 22c/00 [Preview; JPEG: 400 x 300; 112k] [Full size; JPEG: 1280 x 960; 184k] The initial tuning of the YEPUN optical system took place in the early evening of September 3, 2000, from the "observing hut" on the floor of the telescope enclosure. From left to right: Krister Wirenstrand who is responsible for the VLT Control Software, Jason Spyromilio - Head of the Commissioning Team, and Massimo Tarenghi , VLT Manager. (Digital Photo). ESO Press Photo 22d/00 ESO Press Photo 22d/00 [Preview; JPEG: 400 x 300; 112k] [Full size; JPEG: 1280 x 960; 184k] "Mission Accomplished" - The ESO Director General, Catherine Cesarsky , and the Paranal Director, Roberto Gilmozzi , face the VLT Manager, Massimo Tarenghi at the YEPUN Control Station, right after successful "First Light" for this telescope. (Digital Photo). An aerial image of YEPUN in its enclosure is available as ESO PR Photo 43a/99. The mechanical structure of YEPUN was first pre-assembled at the Ansaldo factory in Milan (Italy) where it served for tests while the other telescopes were erected at Paranal. An early photo ( ESO PR Photo 37/95 ) is available that was obtained during the visit of the ESO Council to Milan in December 1995, cf. ESO PR 18/95. Paranal at sunset ESO Press Photo 22e/00 ESO Press Photo 22e/00 [Preview; JPEG: 400 x 200; 14kb] [Normal; JPEG: 800 x 400; 84kb] [High-Res; JPEG: 4000 x 2000; 4.0Mb] Wide-angle view of the Paranal Observatory at sunset. The last rays of the sun illuminate the telescope enclosures at the top of the mountain and some of the buildings at the Base Camp. The new "residencia" that will provide living space for the Paranal staff and visitors from next year is being constructed to the left. The "First Light" observations with YEPUN began soon after sunset. This photo was obtained in March 2000. Additional photos (September 6, 2000) ESO PR Photo 22f/00 ESO PR Photo 22f/00 [Preview - JPEG: 400 x 487 pix - 224k] [Normal - JPEG: 992 x 1208 pix - 1.3Mb] Caption : ESO PR Photo 22f/00 shows a colour composite of three exposures of a field in the dwarf galaxy NGC 6822 , a member of the Local Group of Galaxies at a distance of about 2 million light-years. They were obtained by YEPUN and the VLT Test Camera at about 23:00 hrs local time on September 3 (03:00 UT on September 4), 2000. The image is based on exposures through three optical filtres: B(lue) (10 min exposure; here rendered as blue), V(isual) (5 min; green) and R(ed) (5 min; red); the seeing was 0.9 - 1.0 arcsec. Individual stars of many different colours (temperatures) are seen. The field measures about 1.5 x 1.5 arcmin 2. Another image of this galaxy was obtained earlier with ANTU and FORS1 , cf. PR Photo 10b/99. ESO Press Photo 22g/00 ESO Press Photo 22g/00 [Preview; JPEG: 400 x 300; 136k] [Full size; JPEG: 1280 x 960; 224k] Most of the crew that put together YEPUN is here photographed after the installation of the M1 mirror cell at the bottom of the mechanical structure (on July 30, 2000). Back row (left to right): Erich Bugueno (Mechanical Supervisor), Erito Flores (Maintenance Technician); front row (left to right) Peter Gray (Mechanical Engineer), German Ehrenfeld (Mechanical Engineer), Mario Tapia (Mechanical Engineer), Christian Juica (kneeling - Mechanical Technician), Nelson Montano (Maintenance Engineer), Hansel Sepulveda (Mechanical Technican) and Roberto Tamai (Mechanical Engineer). (Digital Photo). ESO PR Photos may be reproduced, if credit is given to the European Southern Observatory. The ESO PR Video Clips service to visitors to the ESO website provides "animated" illustrations of the ongoing work and events at the European Southern Observatory. The most recent clip was: ESO PR Video Clip 05/00 ("Portugal to Accede to ESO (27 June 2000). Information is also available on the web about other ESO videos.

A new image representation for compact and secure communication

DOE Office of Scientific and Technical Information (OSTI.GOV)

Prasad, Lakshman; Skourikhine, A. N.

In many areas of nuclear materials management there is a need for communication, archival, and retrieval of annotated image data between heterogeneous platforms and devices to effectively implement safety, security, and safeguards of nuclear materials. Current image formats such as JPEG are not ideally suited in such scenarios as they are not scalable to different viewing formats, and do not provide a high-level representation of images that facilitate automatic object/change detection or annotation. The new Scalable Vector Graphics (SVG) open standard for representing graphical information, recommended by the World Wide Web Consortium (W3C) is designed to address issues of imagemore » scalability, portability, and annotation. However, until now there has been no viable technology to efficiently field images of high visual quality under this standard. Recently, LANL has developed a vectorized image representation that is compatible with the SVG standard and preserves visual quality. This is based on a new geometric framework for characterizing complex features in real-world imagery that incorporates perceptual principles of processing visual information known from cognitive psychology and vision science, to obtain a polygonal image representation of high fidelity. This representation can take advantage of all textual compression and encryption routines unavailable to other image formats. Moreover, this vectorized image representation can be exploited to facilitate automated object recognition that can reduce time required for data review. The objects/features of interest in these vectorized images can be annotated via animated graphics to facilitate quick and easy display and comprehension of processed image content.« less

SINFONI Opens with Upbeat Chords

NASA Astrophysics Data System (ADS)

2004-08-01

First Observations with New VLT Instrument Hold Great Promise [1] Summary The European Southern Observatory, the Max-Planck-Institute for Extraterrestrial Physics (Garching, Germany) and the Nederlandse Onderzoekschool Voor Astronomie (Leiden, The Netherlands), and with them all European astronomers, are celebrating the successful accomplishment of "First Light" for the Adaptive Optics (AO) assisted SINFONI ("Spectrograph for INtegral Field Observation in the Near-Infrared") instrument, just installed on ESO's Very Large Telescope at the Paranal Observatory (Chile). This is the first facility of its type ever installed on an 8-m class telescope, now providing exceptional observing capabilities for the imaging and spectroscopic studies of very complex sky regions, e.g. stellar nurseries and black-hole environments, also in distant galaxies. Following smooth assembly at the 8.2-m VLT Yepun telescope of SINFONI's two parts, the Adaptive Optics Module that feeds the SPIFFI spectrograph, the "First Light" spectrum of a bright star was recorded with SINFONI in the early evening of July 9, 2004. The following thirteen nights served to evaluate the performance of the new instrument and to explore its capabilities by test observations on a selection of exciting astronomical targets. They included the Galactic Centre region, already imaged with the NACO AO-instrument on the same telescope. Unprecedented high-angular resolution spectra and images were obtained of stars in the immediate vicinity of the massive central black hole. During the night of July 15 - 16, SINFONI recorded a flare from this black hole in great detail. Other interesting objects observed during this period include galaxies with active nuclei (e.g., the Circinus Galaxy and NGC 7469), a merging galaxy system (NGC 6240) and a young starforming galaxy pair at redshift 2 (BX 404/405). These first results were greeted with enthusiasm by the team of astronomers and engineers [2] from the consortium of German and Dutch Institutes and ESO who have worked on the development of SINFONI for nearly 7 years. The work on SINFONI at Paranal included successful commissioning in June 2004 of the Adaptive Optics Module built by ESO, during which exceptional test images were obtained of the main-belt asteroid (22) Kalliope and its moon. Moreover, the ability was demonstrated to correct the atmospheric turbulence by means of even very faint "guide" objects (magnitude 17.5), crucial for the observation of astronomical objects in many parts of the sky. SPIFFI - SPectrometer for Infrared Faint Field Imaging - was developed at the Max Planck Institute for Extraterrestrische Physik (MPE) in Garching (Germany), in a collaboration with the Nederlandse Onderzoekschool Voor Astronomie (NOVA) in Leiden and the Netherlands Foundation for Research in Astronomy (ASTRON), and ESO. PR Photo 24a/04: SINFONI Adaptive Optics Module at VLT Yepun (June 2004) PR Photo 24b/04: SINFONI at VLT Yepun, now fully assembled (July 2004) PR Photo 24c/04: "First Light" image from the SINFONI Adaptive Optics Module PR Photo 24d/04: AO-corrected Image of a 17.5-magnitude Star PR Photo 24e/04: SINFONI undergoing Balancing and Flexure Tests at VLT Yepun PR Photo 24f/04: SINFONI "First Light" Spectrum of HD 130163 PR Photo 24g/04: Members of the SINFONI Adaptive Optics Module Commissioning Team PR Photo 24h/04: Members of the SPIFFI Commissioning Team PR Photo 24i/04: The Principle of Integral Field Spectroscopy (IFS) PR Photo 24j/04: The Orbital Motion of Linus around (22) Kalliope PR Photo 24k/04: SINFONI Observations of the Galactic Centre Region PR Photo 24l/04: SINFONI Observations of the Circinus Galaxy PR Photo 24m/04: SINFONI Observations of the AGN Galaxy NGC 7469 PR Photo 24n/04: SINFONI Observations of NGC 6240 PR Photo 24o/04: SINFONI Observations of the Young Starforming Galaxies BX 404/405 PR Video Clip 07/04: The Orbital Motion of Linus around (22) Kalliope SINFONI: A powerful and complex instrument ESO PR Photo 24a/04 ESO PR Photo 24a/04 The SINFONI Adaptive Optics Module Commissioning Setup [Preview - JPEG: 427 x 400 pix - 230k] [Normal - JPEG: 854 x 800 pix - 551k] ESO PR Photo 24b/04 ESO PR Photo 24b/04 SINFONI at the VLT Yepun Cassegrain Focus [Preview - JPEG: 414 x 400 pix - 222k] [Normal - JPEG: 827 x 800 pix - 574k] Captions: ESO PR Photo 24a/04 shows the SINFONI Adaptive Optics Module, installed at the 8.2-m VLT YEPUN telescope during the first tests in June 2004. At this time, SPIFFI was not yet installed. The blue ring is the Adaptive Optics Module. The yellow parts, with a weight of 800 kg, simulate SPIFFI. The IR Test Imager is located inside the yellow ring. On ESO PR Photo 24b/04, the Near-Infrared Spectrograph SPIFFI in its cryogenic aluminium cylinder has now been attached. A new and very powerful astronomical instrument, a world-leader in its field, has been installed on the Very Large Telescope at the Paranal Observatory (Chile), cf. PR Photos 24a-b/04. Known as SINFONI ("Spectrograph for INtegral Field Observation in the Near-Infrared"), it was mounted in two steps at the Cassegrain focus of the 8.2-m VLT YEPUN telescope. First Light of the completed instrument was achieved on July 9, 2004 and various test observations during the subsequent commissioning phase were carried out with great success. SINFONI has two parts, the Near Infrared Integral Field Spectrograph, also known as SPIFFI (SPectrometer for Infrared Faint Field Imaging), and the Adaptive Optics Module. SPIFFI was developed at the Max Planck Institute for Extraterrestrische Physik (MPE) (Garching, Germany), in a collaboration with the Nederlandse Onderzoekschool Voor Astronomie (NOVA) in Leiden, the Netherlands Foundation for Research in Astronomy (ASTRON) (The Netherlands), and the European Southern Observatory (ESO) (Garching, Germany). The Adaptive Optics (AO) Module was developed by ESO. Once fully commissioned, SINFONI will provide adaptive-optics assisted Integral Field Spectroscopy in the near-infrared 1.1 - 2.45 µm waveband. This advanced technique provides simultaneous spectra of numerous adjacent regions in a small sky field, e.g., of an interstellar nebula, the stars in a dense stellar cluster or a galaxy. Astronomers refer to these data as "3D-spectra" or "data cubes" (i.e., one spectrum for each small area in the two-dimensional sky field), cf. Appendix A. The SINFONI Adaptive Optics Module is based on a 60-element curvature system, similar to the Multi Application Curvature Adaptive Optics devices (MACAO), developed by the ESO Adaptive Optics Department and of which three have already been installed at the VLT (ESO PR 11/03); the last one in August 2004. Provided a sufficiently bright reference source ("guide star") is available within 60 arcsec of the observed field, the SINFONI AO module will ultimately offer diffraction-limited images (resolution 0.050 arcsec) at a wavelength of 2 µm. At the centre of the field, partial correction can be performed with guide stars as faint as magnitude 17.5. In about 6-months' time, it will benefit from a sodium Laser Guide Star, achieving a much better sky coverage than what is now possible. SPIFFI is a fully cryogenic near-infrared integral field spectrograph allowing observers to obtain simultaneously spectra of 2048 pixels within a 64 x 32 pixel field-of-view. In conjunction with the AO Module, it performs spectroscopy with slit-width sampling at the diffraction limit of an 8-m class telescope. For observations of very faint, extended celestial objects, the spatial resolution can be degraded so that both sensitivity and field-of-view are increased. SPIFFI works in the near-infrared wavelength range (1.1 - 2.45 µm) with a moderate spectral resolving power (R = 1500 to 4500). More information about the way SPIFFI functions will be found in Appendix A. "First Light with SINFONI's Adaptive Optics Module ESO PR Photo 24c/04 ESO PR Photo 24c/04 SINFONI AO "First Light" Image [Preview - JPEG: 400 x 482 pix - 106k] [Normal - JPEG: 800 x 963 pix - 256k] ESO PR Photo 24d/04 ESO PR Photo 24d/04 AO-corrected image of 17.5-magnitude Star [Preview - JPEG: 509 x 400 pix - 80k] [Normal - JPEG: 1018 x 800 pix - 182k] Captions: ESO PR Photo 24c/04 shows the "First Light" image obtained with the SINFONI AO Module and a high-angular-resolution near-infrared Test Camera during the night of May 31 - June 1, 2004. The magnitude of the observed star is 11 and the seeing conditions median. The diffraction limit at wavelength 2.2 µm of the 8.2-m telescope (FWHM 0.06 arcsec) was reached and is indicated by the bar. ESO PR Photo 24d/04: Image of a very faint guide star (visual magnitude 17.5), obtained with the SINFONI AO Module. To the right, the seeing-limited K-band image (FWHM 0.38 arcsec). To the left, the AO-corrected image (FWHM 0.145 arcsec). The ability to perform AO corrections on very faint guide objects is essential for SINFONI in order to observe very faint extragalactic objects. Because of the complexity of SINFONI, with its two modules, it was decided to perform the installation on the 8.2-m VLT Yepun telescope in two steps. The Adaptive Optics module was completely dismounted at ESO-Garching (Germany) and the corresponding 6 tons of equipment was air-freighted from Frankfurt to Santiago de Chile. The subsequent transport by road arrived at the Paranal Observatory on April 21, 2004. After 6 weeks of reintegration and testing in the Integration Hall, the AO Module was mounted on Yepun on May 30 - 31, together with a high-angular-resolution near-infrared Test Camera, cf. PR Photo 24a/04. Technical "First-Light" with this system was achieved around midnight on May 31st by observing a 11-magnitude star, cf. PR Photo 24c/04, reaching right away the theoretical diffraction limit of the 8.2-m telescope (0.06 arcsec) at this wavelength (2.2 µm). Following this early success, the ESO AO team continued the full on-sky tuning and testing of the AO Module until June 8, setting in particular a new world record by reaching a limiting guide-star magnitude of 17.5, two-and-a-half magnitudes (a factor of 10) fainter than ever achieved with any telescope! The ability to perform AO corrections on very faint guide objects is essential for SINFONI in order to observe very faint extragalactic objects. During this commissioning period, test observations were performed of the binary asteroid (22) Kalliope and its moon Linus. They were made by the ESO AO team and served to demonstrate the high performance of this ESO-built Adaptive Optics (AO) system at near-infrared wavelengths. More information about these observations, including a movie of the orbital motion of Linus is available in Appendix B. "First Light" with SINFONI ESO PR Photo 24e/04 ESO PR Photo 24e/04 SINFONI Undergoing Balancing and Flexure Tests at VLT Yepun [Preview - JPEG: 427 x 400 pix - 269k] [Normal - JPEG: 854 x 800 pix - 730k] ESO PR Photo 24f/04 ESO PR Photo 24f/04 SINFONI "First Light" Spectrum [Preview - JPEG: 427 x 400 pix - 94k] [Normal - JPEG: 854 x 800 pix - 222k] Captions: ESO PR Photo 24e/04 shows SINFONI attached to the Cassegrain focus of the 8.2-m VLT Yepun telescope during balancing and flexure tests. ESO PR Photo 24f/04: "First Light" "data cube" spectrum obtained with SINFONI on the bright star HD 130163 on July 9, 2004, as seen on the science data computer screen. This 7th-magnitude A0 V star was observed in the near-infrared H-band with a moderate seeing of 0.8 arcsec. The width of the slitlets in this image is 0.25 arcsec. The exposure time was 1 second. The fully integrated SPIFFI module was air-freighted from Frankfurt to Santiago de Chile and arrived at Paranal on June 5, 2004. The subsequent cool-down to -195 °C was done and an extensive test programme was carried through during the next two weeks. Meanwhile, the AO Module was removed from the telescope and the "wedding" with SPIFFI was celebrated on June 20 in the Paranal Integration Hall. All went well and the first AO-corrected test spectra were obtained immediately thereafter. The extensive tests of SINFONI continued at this site until July 7, 2004, when the instrument was declared fit for work at the telescope. The installation at the 8.2-m VLT Yepun telescope was then accomplished on July 8 - 9, cf. PR Photos 24b/04 and 24e/04. "First Light" was achieved in the early evening of July 9, 2004, only 30 min after the telescope enclosure was opened. At 19:30 local time, SINFONI recorded the first AO-corrected "data cube" with spectra of HD 130163, cf. PR Photo 24f/04. This 7th-magnitude star was observed in the near-infrared H-band with a moderate seeing of 0.8 arcsec. Test Observations with SINFONI ESO PR Photo 24k/04 ESO PR Photo 24k/04 SINFONI Observations of the Galactic Centre [Preview - JPEG: 427 x 400 pix - 213k] [Normal - JPEG: 854 x 800 pix - 511k] ESO PR Photo 24o/04 ESO PR Photo 24o/04 SINFONI Observations of the Distant Galaxy Pair BX 404/405 [Preview - JPEG: 481 x 400 pix - 86k] [Normal - JPEG: 962 x 800 pix - 251k] Captions: ESO PR Photo 24k/04: The coloured image (background) shows a three-band composite image (H, K, and L-bands) obtained with the AO imager NACO on the 8.2-m VLT Yepun telescope. On July 15, 2004, the new SINFONI instrument, mounted at the Cassegrain focus of the same telescope, observed the innermost region (the central 1 x 1 arcsec) of the Milky Way Galaxy in the combined H+K band (1.45 - 2.45 µm) during a total of 110 min "on-source". The insert (upper left) shows the immediate neighbourhood of the central black hole as seen with SINFONI. The position of the black hole is marked with a yellow circle. Later in the night (03:37 UT on July 16), a flare from the black hole ocurred (a zoom-in is shown in the insert at the lower left) and the first-ever infrared spectrum of this phenomenon was observed. It was also possible to register for the first time in great detail the near-infrared spectra of young massive stars orbiting the black hole; some of these are shown in the inserts at the upper right; stars are identified by their "S"-designations. The lower right inserts show the spectra of stars in "IRS 13 E", a very compact cluster of very young and massive stars, located about 3.5 arcsec to the south-west of the black hole. The wavefront reference ("guide") star employed for these AO observations is comparably faint (red magnitude approx. 15), and it is located about 20 arcsec away from the field centre. The seeing during these observations was about 0.6 arcsec. The width of the slitlets was 0.025 arcsec. See Appendix G for more detail. ESO PR Photo 24o/04 shows the distant galaxy pair BX 404/405, as recorded in the K-band (wavelength 2 µm, centered on the redshifted H-alpha line), without AO-correction because of the lack of a nearby, sufficiently bright "guide" star. The width of each slitlet was 0.25 arcsec and the seeing about 0.6 arcsec. The integration time on the galaxy was 2 hours "on-source". The image shown has been reconstructed by combining all of the spectral elements around the H-alpha spectral line. The spectrum of BX 405 (upper right) clearly reveals signs of a velocity shear while that of BX 404 does not. This may be a sign of rotation, a possible signature of a young disc in this galaxy. More information can be found in Appendix C. Until July 22, test observations on a number of celestial objects were performed in order to tune the instrument, to evaluate the performance and to demonstrate its astronomical capabilities. In particular, spectra were obtained of various highly interesting celestial objects and sky regions. Details about these observations (and some images obtained with the AO Module alone) are available in the Appendices to this Press Release: * a video of the motion of the moon Linus around the main-belt asteroid (22) Kalliope, providing the best view of this binary system obtained so far (Appendix B), * images and first-ever detailed spectra of many of the stars that move near the massive black hole at the Galactic Centre, with crucial information on the nature of the individual stars and their motions (Appendix C), * images and spectra of the heavily dust-obscured, active centre of the Circinus galaxy, one of the closest active galaxies, showing ordered rotation in this area and distinct broad and narrow components of the spectral line of Ca7+-ions (Appendix D), * images and spectra of the less obscured central area of NGC 7469, a more distant active galaxy, with spectral lines of molecular hydrogen and carbon monoxide showing a very different distribution of these species (Appendix E), * images and spectra of the Infrared Luminous Galaxy (ULIRG) NGC 6240, a typical galaxy merger, displaying important differences between the two nuclei (Appendix F), and * images and spectra of the young starforming galaxies BX 404/405, casting more light on the formation of disks in spiral galaxies (Appendix G) The SINFONI Teams ESO PR Photo 24g/04 ESO PR Photo 24g/04 Members of the SINFONI Adaptive Optics Commissioning Team [Preview - JPEG: 646 x 400 pix - 198k] [Normal - JPEG: 1291 x 800 pix - 618k] ESO PR Photo 24h/04 ESO PR Photo 24h/04 Members of the SPIFFI Commissioning Team [Preview - JPEG: 491 x 400 pix - 193k] [Normal - JPEG: 982 x 800 pix - 482k] Captions: ESO PR Photo 24g/04 Members of the SINFONI Adaptice Optics Commissioning Team in the VLT Control Room in the night between June 7 - 8, 2004. From left to right and top to bottom: Thomas Szeifert, Sebastien Tordo, Stefan Stroebele, Jerome Paufique, Chris Lidman, Robert Donaldson, Enrico Fedrigo, Markus Kissler Patig, Norbert Hubin, Henri Bonnet. ESO PR Photo 24h/04: Members of the SPIFFI Commissioning Team on August 17. From left to right, Roberto Abuter, Frank Eisenhauer, Andrea Gilbert and Matthew Horrobin. The first SINFONI results have been greeted with enthusiasm, in particular by the team of astronomers and engineers from the consortium of German and Dutch institutes and ESO who worked on the development of SINFONI for nearly 7 years. Some of the members of the Commissioning Teams are depicted in PR Photos 24g/04 and 24h/04; in addition to the SPIFFI team members present on the second photo, Walter Bornemann, Reinhard Genzel, Hans Gemperlein, Stefan Huber have also been working on the reintegration/commissioning in Paranal. Notes [1] This press release is issued in coordination between ESO, the Max-Planck-Institute for Extraterrestrial Physics (MPE) in Garching, Germany, and the Nederlandse Onderzoekschool Voor Astronomie in Leiden, The Netherlands. A German version is available at http://www.mpg.de/bilderBerichteDokumente/dokumentation/pressemitteilungen/2004/pressemitteilung20040824/index.html and a Dutch version at http://www.astronomy.nl/inhoud/pers/persberichten/30_08_04.html. [2] The SINFONI team consists of Roberto Abuter, Andrew Baker, Walter Bornemann, Ric Davies, Frank Eisenhauer (SPIFFI Principal Investigator), Hans Gemperlein, Reinhard Genzel (MPE Director), Andrea Gilbert, Armin Goldbrunner, Matthew Horrobin, Stefan Huber, Christof Iserlohe, Matthew Lehnert, Werner Lieb, Dieter Lutz, Nicole Nesvadba, Claudia Röhrle, Jürgen Schreiber, Linda Tacconi, Matthias Tecza, Niranjan Thatte, Harald Weisz (Max-Planck-Institut für Extraterrestrische Physik, Garching, Germany), Anthony Brown, Paul van der Werf (NOVA, Leiden, The Netherlands), Eddy Elswijk, Johan Pragt, Jan Kragt, Gabby Kroes, Ton Schoenmaker, Rik ter Horst (ASTRON, Dwingeloo, The Netherlands), Henri Bonnet (SINFONI Project Manager), Roberto Castillo, Ralf Conzelmann, Romuald Damster, Bernard Delabre, Christophe Dupuy, Robert Donaldson, Christophe Dumas, Enrico Fedrigo, Gert Finger, Gordon Gillet, Norbert Hubin (Head of Adaptive Optics Dept.), Andreas Kaufer, Franz Koch, Johann Kolb, Andrea Modigliani, Guy Monnet (Head of Telescope Systems Division), Chris Lidman, Jochen Liske, Jean Louis Lizon, Markus Kissler-Patig (SINFONI Instrument Scientist), Jerome Paufique, Juha Reunanen, Silvio Rossi, Riccardo Schmutzer, Armin Silber, Stefan Ströbele (SINFONI System Engineer), Thomas Szeifert, Sebastien Tordo, Leander Mehrgan, Joerg Stegmeier, Reinhold Dorn (European Southern Observatory). Contacts Frank Eisenhauer Max-Planck-Institut für Extraterrestrische Physik (MPE) Garching, Germany Phone: +49-89-30000-3563 Email: eisenhau@mpe.mpg.de Paul van der Werf Leiden Observatory Leiden, The Netherlands Phone: +31-71-5275883 Email: pvdwerf@strw.leidenuniv.nl Henri Bonnet European Southern Observatory (ESO) Email: hbonnet@eso.org Reinhard Genzel Max-Planck-Institut für Extraterrestrische Physik (MPE) Garching, Germany Phone: +49-89-30000-3280 Email: Norbert Hubin European Southern Observatory (ESO) Email: nhubin@eso.org Appendix A: Integral Field Spectroscopy as a Powerful Discovery Tool ESO PR Photo 24i/04 ESO PR Photo 24i/04 How Integral Field Spectroscopy Works [Preview - JPEG: 400 x 425 pix - 127k] [Normal - JPEG: 800 x 850 pix - 366k] Caption: ESO PR Photo 24i/04 shows the principle of Integrated Field Spectroscopy (IFS). The detailed explanation is found in the text. How does SINFONI work? What is Integral Field Spectroscopy (IFS)? The idea of IFS is to obtain a spectrum of each defined spatial element ("spaxel") in the field-of-view. Several techniques to do this are available - in SINFONI, the slicer principle is applied. This involves (PR Photo 24i/04) that * the two-dimensional field-of-view is cut into slices, the so-called slitlets (short slits in contrast to normal long-slit spectroscopy), * the slitlets are then arranged next to each other to form a pseudo-long-slit, * a grating is used to disperse the light, and * the photons are detected with a Near-InfraRed detector. Following data reduction, the set of generated spectra can be re-arranged in the computer to form a 3-dimensional "data cube" of two spatial, and one wavelength dimension. Thus the term "3D-Spectroscopy" is sometimes used for IFS. Appendix B: Linus' orbital motion around Kalliope ESO PR Photo 24j/04 ESO PR Photo 24j/04 Asteroid Kalliope and its Moon Linus [Preview - JPEG: 400 x 427 pix - 50k] [Normal - JPEG: 800 x 854 pix - 136k] ESO PR Video 07/04 ESO PR Video 07/04 The Motion of Linus around Kalliope [MPG: 800 x 800 pix - 128k] [AVI : 800 x 800 pix - 176k] [Animated GIF : 800 x 800 pix - 592k] Caption: ESO PR Photo 24j/04 and Video Clip 07/04 show the best-ever images of the moon Linus orbiting Asteroid (22) Kalliope. It was obtained with the SINFONI Adaptive Optics Module and a high-angular-resolution near-infrared Test Camera during commissioning in June 2004. At minimum separation, the satellite approaches Kalliope to 0.33 arcsec, i.e. the angle under which a 1 Euro coin is seen at a distance of 15 kilometers. At maximum separation, the angular distance is nearly twice as large. For clarity, the brightness of the asteroid has been artificially decreased by a factor of 15, to the level of the moon. This image processing technique also permits to perceive the variation of the asteroid's shape as Kalliope spins around its own axis with a period of 4.15 hours. The asteroid, with an angular diameter of 0.11 arcsec, is barely resolved in these VLT images (resolution 0.06 arcsec at wavelength 2.2 µm). The satellite measures about 50 km acroos and orbits Kalliope at a distance of about 1000 kilometers. ESO Video Clip 07/04 shows the 3.6-day orbital motion of the satellite (moon) Linus around the main-belt asteroid (22) Kalliope. Kalliope orbits the Sun between Mars and Jupiter; it measures about 180 km across and the diameter of its moon is 50 km. This system was observed with the SINFONI AO Module for short periods over four consecutive nights. Linus moves around Kalliope in a circular orbit, at a distance of 1000 km and with a direction of motion similar to the rotation of Kalliope (prograde rotation); the orbital plane of the moon was seen under a 60°-angle with respect to the line-of-sight. The unobserved parts of this orbit are indicated by a dotted line. A hypothetical observer on the surface of Kalliope would live in a strange world: the days would be 14 hours long, and the sky would be filled by a moon five times bigger than our own! The brightness changes of the Linus images is due to variations in the sky conditions at the time of the observations. Rapid changes in the atmosphere result in variations in the sharpness of the corrected images. During the first two nights, seeing conditions were very good, but less so during the last two nights; this can be seen as a slight loss of sharpness of the corresponding satellite images. The discovery of this asteroid satellite, named Linus after the son of Kalliope, the Greek muse of heroic poetry, was first reported in September 2001 by a group of astronomers using the Canadian-France-Hawaii telescope on Mauna Kea (Hawaii, USA). Although previously believed to consist of metal-rich material, the discovery of Linus allowed the scientists to determine the mean density of Kalliope as ~ 2 g/cm3, a rather low value and not consistent with a metal-rich object. Kalliope is now believed to be a "rubble-pile" stony asteroid. Its porous interior is due to a catastrophic collision with another, smaller asteroid early in its history and which also gave birth to Linus. Other references related to Kalliope can be found in the International Astronomical Union Circular (IAUC) 7703 (2001) and a research article "A low density M-type asteroid in the main-belt" by Margot and Brown (Science 300, 193, 2003). Appendix C: Stars at the Galactic Centre and a Flare from the Black Hole ESO PR Photo 24k/04 ESO PR Photo 24k/04 SINFONI Observations of the Galactic Centre [Preview - JPEG: 427 x 400 pix - 213k] [Normal - JPEG: 854 x 800 pix - 511k] Caption: ESO PR Photo 24k/04: The coloured image (background) shows a three-band composite image (H, K, and L-bands) obtained with the AO imager NACO on the 8.2-m VLT Yepun telescope. On July 15, 2004, the new SINFONI instrument, mounted at the Cassegrain focus of the same telescope, observed the innermost region (the central 1 x 1 arcsec) of the Milky Way Galaxy in the combined H+K band (1.45 - 2.45 µm) during a total of 110 min "on-source". The insert (upper left) shows the immediate neighbourhood of the central black hole as seen with SINFONI. The position of the black hole is marked with a yellow circle. Later in the night (03:37 UT on July 16), a flare from the black hole ocurred (a zoom-in is shown in the insert at the lower left) and the first-ever infrared spectrum of this phenomenon was observed. It was also possible to register for the first time in great detail the near-infrared spectra of young massive stars orbiting the black hole; some of these are shown in the inserts at the upper right; stars are identified by their "S"-designations. The lower right inserts show the spectra of stars in "IRS 13 E", a very compact cluster of very young and massive stars, located about 3.5 arcsec to the south-west of the black hole. The wavefront reference ("guide") star employed for these AO observations is comparably faint (red magnitude approx. 15), and it is located about 20 arcsec away from the field centre. The seeing during these observations was about 0.6 arcsec. The width of the slitlets was 0.025 arcsec. The Milky Way Centre is a unique laboratory for studying physical processes that are thought to be common in galactic nuclei. The Galactic Centre is not only the best studied case of a supermassive black hole, but the region also hosts the largest population of high-mass stars in the Galaxy. Diffraction-limited near-IR integral field spectroscopy offers a unique opportunity for exploring in detail the physical phenomena responsible for the active phases of this supermassive black hole, and for studying the dynamics and evolution of the star cluster in its immediate vicinity. Earlier observations with the VLT have been described in ESO PR 17/02 and ESO PR 26/03. With the new SINFONI observations, some of which are displayed in PR Photo 24k/04, it was possible to obtain for the first time very detailed near-infrared spectra of several young and massive stars orbiting the black hole at the centre of our galaxy. The presence of spectral signatures from ionised hydrogen (the Bracket-gamma line) and Helium clearly classify these stars as young, massive early-type stars. They are comparatively short-lived, and the large fraction of such stars in the immediate vicinity of a supermassive black hole is a mystery. The first SINFONI observations of the stellar populations in the innermost Galactic Centre region will now help to explain the origin and formation process of those stars. Moreover, the observed spectral features allow measuring their motions along the line-of-sight (the "radial velocities"). Combining them with the motions in the sky (the "proper motions") obtained from previous observations with the NACO instrument (ESO PR 17/02), it is now possible to determine all orbital parameters for the "S"-stars. This in turn makes it possible to measure directly the mass and the distance of the supermassive black hole at the centre of our galaxy. But not only this! Even more exciting, it became possible to register for the first time the infrared spectrum of a flare from the Galactic Centre black hole (cf. ESO PR 26/03). From the earlier imaging observations, it is known that such outbursts occur approximately once every 4 hours, giving us a uniquely detailed glimpse of a black hole feeding on left-over gas in its close surroundings. It is only the innovative technique of SINFONI - providing spectra for every pixel in a diffraction-limited image - that made it possible to capture the infrared spectrum of such a flare. Such spectra from SINFONI will soon allow to understand better the physics and mechanisms involved in the flare emission. Appendix D: The Active Circinus Galaxy ESO PR Photo 24l/04 ESO PR Photo 24l/04 SINFONI Observations of the Circinus Galaxy [Preview - JPEG: 824 x 400 pix - 324k] [Normal - JPEG: 412 x 800 pix - 131k] Caption: ESO PR Photo 24l/04: The Circinus galaxy - one of the nearest galaxies with an active centre (AGN) - was observed in the K-band (wavelength 2 µm) using the nucleus to guide the SINFONI AO Module. The seeing was 0.5 arcsec and the width of each slitlet 0.025 arcsec; the total integration time on the galaxy was 40 min. At the top is a K-band image of the central arcsec of the galaxy (left insert) and a K-band spectrum of the nucleus (right). In the lower half are images (left) in the light of ionised hydrogen (the Brackett-gamma line) and molecular hydrogen lines (H2), together with their combined rotation curve (middle), as well as images of the broad and narrow components of the high excitation [Ca VIII] spectral line (right). The false-colours in the images represent regions of different surface brightness. At a distance of about 13 million light-years, the Circinus galaxy is one of the nearest galaxies with a very active black hole at the centre. It is seen behind a highly obscured sky field, only 3° from the Milky Way main plane in the southern constellation of this name ("The Pair of Compasses"). Using the nucleus of this galaxy to guide the AO Module, SINFONI was able to zoom in on the central arcsec region - only 60 light-years across - and to map the immediate environment of the black hole at the centre, cf. PR Photo 24l/04. The K-band (wavelength 2 µm) image (insert at the upper left) displays a very compact structure; the emission recorded at this wavelength comes from hot dust heated by radiation from the accretion disc around the black hole. However, as may be seen in the two inserts below, both the emission from ionized hydrogen (the Brackett-gamma line) and molecular hydrogen (H2) are more extended, up to about 30 light-years. As these spectral lines (cf. the spectral tracing at the upper right) are quite narrow and show ordered rotation up to ±40km/s, it is likely that they arise from star formation in a disk around the central black hole. A surprise from the SINFONI observations is that the spectral line of Ca7+-ions (seven times ionised Calcium atoms, or [Ca VIII], which are produced by the ionizing effect of very energetic ultraviolet radiation) in this area appears to have distinct broad and narrow components (images at the lower right). The broad component is centred on the region around the black hole, and probably arises in the so-called "Broad-Line Region". The narrow component is displaced to the north-west and most likely indicates a region where there is a direct line-of-sight from the black hole to some gas clouds. Appendix E: The Active Nucleus in NGC 7469 ESO PR Photo 24m/04 ESO PR Photo 24m/04 SINFONI Observations of NGC 7469 [Preview - JPEG: 470 x 400 pix - 116k] [Normal - JPEG: 939 x 800 pix - 324k] Caption: ESO PR Photo 24m/04: NGC 7469 was observed in K band (wavelength 2 µm) using the nucleus to guide the adaptive optics. The width of each slitlet was 0.025 arcsec and the seeing was 1.1 arcsec. The total integration time on the galaxy was 70 min "on-source". To the upper left is a K-band image (2 µm) of the central arcsec of the NGC7469 and to the upper right, the spectrum of the nucleus. To the lower left is an image of the molecular hydrogen line, together with its rotation curve. There is an image in the light of ionized hydrogen (Bracket-gamma line) at the lower middle and an image of the CO 2-0 absorption bandhead which traces young stars (lower right). The galaxy NGC 7469 (seen north of the celestial equator in the constellation Pegasus) also hosts an active galactic nucleus, but contrary to the Circinus galaxy, it is relatively unobscured. Since NGC 7469 is at a much larger distance, about 225 million light-years, the 0.15 arcsec resolution achieved by SINFONI here corresponds to about 165 light-years. The K-band image (PR Photo 24m/04) shows the bright, compact nucleus of this galaxy, and the spectrum displays very broad lines of ionized hydrogen (the Brackett-gamma line) and helium. This emission arises in the "Broad-Line" region which is still unresolved, as shown by the Brackett-gamma image. On the other hand, the molecular hydrogen extends up to 650 light-years from the centre and shows an ordered rotation. In contrast, the image obtained in the light of CO-molecules - which directly traces late-type stars typical for starbursts - appears very compact. These results confirm those obtained by means of earlier AO observations, but with the new SINFONI data corresponding to various spectral lines, the detailed, two-dimensional structure and motions close to the central black hole are now clearly revealed for the first time. Appendix F: The Galaxy Merger NGC 6240 ESO PR Photo 24n/04 ESO PR Photo 24n/04 SINFONI Observations of NGC 6240 [Preview - JPEG: 506 x 400 pix - 96k] [Normal - JPEG: 1011 x 800 pix - 277k] Caption: ESO PR Photo 24n/04: The galaxy merger system NGC 6240 was observed with SINFONI in the K-band (wavelength 2 µm). This object has two nuclei; the image of the southern one is also shown enlarged, together with the corresponding spectrum. The width of each slitlet was 0.025 arcsec and the seeing was 0.8 arcsec. The total integration time on the galaxy was 80 min. The false-colours in the images represent regions of different surface brightness. The infrared-luminous galaxy NGC 6240 in the constellation Ophiuchus (The Serpent-holder) is in many ways the prototype of a gas-rich, infrared-(ultra-)luminous galaxy merger. This system has two rapidly rotating, massive bulges/nuclei at a projected angular separation of 1.6 arcsec. Each of them contains a powerful starburst region and a luminous, highly obscured, X-ray-emitting supermassive black hole. As such, NGC 6240 is probably a nearby example of dust and gas-rich galaxy merger systems seen at larger distances. NGC6240 is also the most luminous, nearby source of molecular hydrogen emission. It was observed in the K-band (wavelength 2 µm), using a faint star at a distance of about 35 arcsec as the AO "guide" star. The starburst activity is traced by the ionized gas and occurs mostly at the two nuclei in regions measuring around 650 light-years across. The distribution of the molecular gas is very different. It follows a complex spatial and dynamical pattern with several extended streamers. The high-resolution SINFONI data now makes it possible - for the first time - to investigate the distribution and motion of the molecular gas, as well as the stellar population in this galaxy with a "resolution" of about 80 light-years. Appendix G: Motions in the Young Star-Forming Galaxies BX 404/405 ESO PR Photo 24o/04 ESO PR Photo 24o/04 SINFONI Observations of the Distant Galaxy Pair BX 404/405 [Preview - JPEG: 481 x 400 pix - 86k] [Normal - JPEG: 962 x 800 pix - 251k] Caption: ESO PR Photo 24o/04 shows the distant galaxy pair BX 404/405, as recorded in the K-band (wavelength 2 µm, centered on the redshifted H-alpha line), without AO-correction because of the lack of a nearby, sufficiently bright "guide" star. The width of each slitlet was 0.25 arcsec and the seeing about 0.6 arcsec. The integration time on the galaxy was 2 hours "on-source". The image shown has been reconstructed by combining all of the spectral elements around the H-alpha spectral line. The spectrum of BX 405 (upper right) clearly reveals signs of a velocity shear while that of BX 404 does not. This may be a sign of rotation, a possible signature of a young disc in this galaxy. How and when did the discs in spiral galaxies like the Milky Way form? This is one of the longest-standing puzzles in modern cosmology. Two general models presently describe how disk galaxies may form. One is based on a scenario in which there is a gentle collapse of gas clouds that collide and lose momentum. They sink towards a "centre", thereby producing a disc of gas in which stars are formed. The other implies that galaxies grow through repeated mergers of smaller gas-rich galaxies. Together they first produce a spherical mass distribution at the centre and any remaining gas then settles into a disk. Recent studies of stars in the Milky Way system and nearby spiral galaxies suggest that the discs now present in these systems formed about 10,000 million years ago. This corresponds to the epoch when we observe galaxies at redshifts of about 1.5 - 2.5. Interestingly, studies of galaxies at these distances seem consistent with current ideas about when disks may have formed, and there is some evidence that most of the mass in the galaxies was also assembled at that time. In any case, the most direct way to verify such a connection is to observe galaxies at redshifts 1.5-2.5, in order to elucidate whether their observed properties are consistent with velocity patterns of rotating disks of gas and stars. This would be visible as a "velocity shear", i.e., a significant difference in velocity of neigbouring regions. In addition, such observations may provide a good test of the above mentioned hypotheses for how discs may have formed. Various groups of astrophysicists in the US and Europe have developed observational selection criteria which may be used to identify galaxies with properties similar to those expected for young disc galaxies. Observations with SINFONI was made of one of these objects, the galaxy pair BX 404/405 discovered by a group of astronomers at Caltech (USA). For BX 405, clear signs were found of a "velocity shear" like that expected for rotation of a forming disk, but the other object does not show this. It may thus be that the properties of star-forming galaxies at this epoch are quite complex and that only some of them have young disks.

High-resolution seismic-reflection data from offshore northern California — Bolinas to Sea Ranch

USGS Publications Warehouse

Sliter, Ray W.; Johnson, Samuel Y.; Chin, John L.; Allwardt, Parker; Beeson, Jeffrey; Triezenberg, Peter J.

2016-12-05

The U.S. Geological Survey collected high-resolution seismic-reflection data in September 2009, on survey S-8-09-NC, offshore of northern California between Bolinas and Sea Ranch.The survey area spans about 125 km of California’s coast and extends around Point Reyes. Data were collected aboard the U.S. Geological Survey R/V Parke Snavely. Cumulatively, ~1,150 km of seismic-reflection data were acquired using a SIG 2mille minisparker. Subbottom acoustic depth of penetration spanned tens to several hundred meters and varied by location and underlying sediments and rock types.This report includes maps and a navigation file of the surveyed transects, utilizing Google Earth™ software, as well as digital data files showing images of each transect in SEG-Y and JPEG formats. The images of bedrock, sediment deposits, and tectonic structure provide geologic information that is essential to hazard assessment, regional sediment management, and coastal and marine spatial planning at Federal, State and local levels. This information is also valuable for future research on the geomorphic, sedimentary, tectonic, and climatic record of central California.

A Posteriori Restoration of Block Transform-Compressed Data

NASA Technical Reports Server (NTRS)

Brown, R.; Boden, A. F.

1995-01-01

The Galileo spacecraft will use lossy data compression for the transmission of its science imagery over the low-bandwidth communication system. The technique chosen for image compression is a block transform technique based on the Integer Cosine Transform, a derivative of the JPEG image compression standard. Considered here are two known a posteriori enhancement techniques, which are adapted.

A Portrait of One Hundred Thousand and One Galaxies

NASA Astrophysics Data System (ADS)

2002-08-01

Rich and Inspiring Experience with NGC 300 Images from the ESO Science Data Archive Summary A series of wide-field images centred on the nearby spiral galaxy NGC 300 , obtained with the Wide-Field Imager (WFI) on the MPG/ESO 2.2-m telescope at the La Silla Observatory , have been combined into a magnificent colour photo. These images have been used by different groups of astronomers for various kinds of scientific investigations, ranging from individual stars and nebulae in NGC 300, to distant galaxies and other objects in the background. This material provides an interesting demonstration of the multiple use of astronomical data, now facilitated by the establishment of extensively documented data archives, like the ESO Science Data Archive that now is growing rapidly and already contains over 15 Terabyte. Based on the concept of Astronomical Virtual Observatories (AVOs) , the use of archival data sets is on the rise and provides a large number of scientists with excellent opportunities for front-line investigations without having to wait for precious observing time. In addition to presenting a magnificent astronomical photo, the present account also illustrates this important new tool of the modern science of astronomy and astrophysics. PR Photo 18a/02 : WFI colour image of spiral galaxy NGC 300 (full field) . PR Photo 18b/02 : Cepheid stars in NGC 300 PR Photo 18c/02 : H-alpha image of NGC 300 PR Photo 18d/02 : Distant cluster of galaxies CL0053-37 in the NGC 300 field PR Photo 18e/02 : Dark matter distribution in CL0053-37 PR Photo 18f/02 : Distant, reddened cluster of galaxies in the NGC 300 field PR Photo 18g/02 : Distant galaxies, seen through the outskirts of NGC 300 PR Photo 18h/02 : "The View Beyond" ESO PR Photo 18a/02 ESO PR Photo 18a/02 [Preview - JPEG: 400 x 412 pix - 112k] [Normal - JPEG: 1200 x 1237 pix - 1.7M] [Hi-Res - JPEG: 4000 x 4123 pix - 20.3M] Caption : PR Photo 18a/02 is a reproduction of a colour-composite image of the nearby spiral galaxy NGC 300 and the surrounding sky field, obtained in 1999 and 2000 with the Wide-Field Imager (WFI) on the MPG/ESO 2.2-m telescope at the La Silla Observatory. See the text for details about the many different uses of this photo. Smaller areas in this large field are shown in Photos 18b-h/02 , cf. below. The High-Res version of this image has been compressed by a factor 4 (2 x 2 pixel rebinning) to reduce it to a reasonably transportable size. Technical information about this and the other photos is available at the end of this communication. Located some 7 million light-years away, the spiral galaxy NGC 300 [1] is a beautiful representative of its class, a Milky-Way-like member of the prominent Sculptor group of galaxies in the southern constellation of that name. NGC 300 is a big object in the sky - being so close, it extends over an angle of almost 25 arcmin, only slightly less than the size of the full moon. It is also relative bright, even a small pair of binoculars will unveil this magnificent spiral galaxy as a hazy glowing patch on a dark sky background. The comparatively small distance of NGC 300 and its face-on orientation provide astronomers with a wonderful opportunity to study in great detail its structure as well as its various stellar populations and interstellar medium. It was exactly for this purpose that some images of NGC 300 were obtained with the Wide-Field Imager (WFI) on the MPG/ESO 2.2-m telescope at the La Silla Observatory. This advanced 67-million pixel digital camera has already produced many impressive pictures, some of which are displayed in the WFI Photo Gallery [2]. With its large field of view, 34 x 34 arcmin 2 , the WFI is optimally suited to show the full extent of the spiral galaxy NGC 300 and its immediate surroundings in the sky, cf. PR Photo 18a/02 . NGC 300 and "Virtual Astronomy" In addition to being a beautiful sight in its own right, the present WFI-image of NGC 300 is also a most instructive showcase of how astronomers with very different research projects nowadays can make effective use of the same observations for their programmes . The idea to exploit one and the same data set is not new, but thanks to rapid technological developments it has recently developed into a very powerful tool for the astronomers in their continued quest to understand the Universe. This kind of work has now become very efficient with the advent of a fully searchable data archive from which observational data can then - after the expiry of a nominal one-year proprietary period for the observers - be made available to other astronomers. The ESO Science Data Archive was established some years ago and now encompasses more than 15 Terabyte [3]. Normally, the identification of specific data sets in such a large archive would be a very difficult and time-consuming task. However, effective projects and software "tools" like ASTROVIRTEL and Querator now allow the users quickly to "filter" large amounts of data and extract those of their specific interest. Indeed, "Archival Astronomy" has already led to many important discoveries, cf. the ASTROVIRTEL list of publications. There is no doubt that "Virtual Astronomical Observatories" will play an increasingly important role in the future, cf. ESO PR 26/01. The present wide-field images of NGC 300 provide an impressive demonstration of the enormous potential of this innovative approach. Some of the ways they were used are explained below. Cepheids in NGC 300 and the cosmic distance scale ESO PR Photo 18b/02 ESO PR Photo 18b/02 [Preview - JPEG: 468 x 400 pix - 112k] [Full-Res - JPEG: 1258 x 1083 pix - 1.6M] Caption : PR Photo 18b/02 shows some of the Cepheid type stars in the spiral galaxy NGC 300 (at the centre of the markers), as they were identified by Wolfgang Gieren and collaborators during the research programme for which the WFI images of NGC 300 were first obtained. In this area of NGC 300, there is also a huge cloud of ionized hydrogen (a "HII shell"). It measures about 2000 light-years in diameter, thus dwarfing even the enormous Tarantula Nebula in the LMC, also photographed with the WFI (cf. ESO PR Photos 14a-g/02 ). The largest versions ("normal" or "full-res") of this and the following photos are shown with their original pixel size, demonstrating the incredible amount of detail visible on one WFI image. Technical information about this photo is available below. In 1999, Wolfgang Gieren (Universidad de Concepcion, Chile) and his colleagues started a search for Cepheid-type variable stars in NGC 300. These stars constitute a key element in the measurement of distances in the Universe. It has been known since many years that the pulsation period of a Cepheid-type star depends on its intrinsic brightness (its "luminosity"). Thus, once its period has been measured, the astronomers can calculate its luminosity. By comparing this to the star's apparent brightness in the sky, and applying the well-known diminution of light with the second power of the distance, they can obtain the distance to the star. This fundamental method has allowed some of the most reliable measurements of distances in the Universe and has been essential for all kinds of astrophysics, from the closest stars to the remotest galaxies. Previous to Gieren's new project, only about a dozen Cepheids were known in NGC 300. However, by regularly obtaining wide-field WFI exposures of NGC 300 from July 1999 through January 2000 and carefully monitoring the apparent brightness of its brighter stars during that period, the astronomers detected more than 100 additional Cepheids . The brightness variations (in astronomical terminology: "light curves") could be determined with excellent precision from the WFI data. They showed that the pulsation periods of these Cepheids range from about 5 to 115 days. Some of these Cepheids are identified on PR Photo 18b/02 , in the middle of a very crowded field in NGC 300. When fully studied, these unique observational data will yield a new and very accurate distance to NGC 300, making this galaxy a future cornerstone in the calibration of the cosmic distance scale . Moreover, they will also allow to understand in more detail how the brightness of a Cepheid-type star depends on its chemical composition, currently a major uncertainty in the application of the Cepheid method to the calibration of the extragalactic distance scale. Indeed, the effect of the abundance of different elements on the luminosity of a Cepheid can be especially well measured in NGC 300 due to the existence of large variations of these abundances in the stars located in the disk of this galaxy. Gieren and his group, in collaboration with astronomers Fabio Bresolin and Rolf Kudritzki (Institute of Astronomy, Hawaii, USA) are currently measuring the variations of these chemical abundances in stars in the disk of NGC 300, by means of spectra of about 60 blue supergiant stars, obtained with the FORS multi-mode instruments at the ESO Very Large Telescope (VLT) on Paranal. These stars, that are among the optically brightest in NGC 300, were first identified in the WFI images of this galaxy obtained in different colours - the same that were used to produce PR Photo 18a/02 . The nature of those stars was later spectroscopically confirmed at the VLT. As an important byproduct of these measurements, the luminosities of the blue supergiant stars in NGC 300 will themselves be calibrated (as a new cosmic "standard candle"), taking advantage of their stellar wind properties that can be measured from the VLT spectra. The WFI Cepheid observations in NGC 300, as well as the VLT blue supergiant star observations, form part of a large research project recently initiated by Gieren and his group that is concerned with the improvement of various stellar distance indicators in nearby galaxies (the "ARAUCARIA" project ). Clues on star formation history in NGC 300 ESO PR Photo 18c/02 ESO PR Photo 18c/02 [Preview - JPEG: 440 x 400 pix - 63k] [Normal - JPEG: 1200 x 1091 pix - 664k] [Full-Res - JPEG: 5515 x 5014 pix - 14.3M] Caption : PR Photo 18c/02 displays NGC 300, as seen through a narrow optical filter (H-alpha) in the red light of hydrogen atoms. A population of intrinsically bright and young stars turned "on" just a few million years ago. Their radiation and strong stellar winds have shaped many of the clouds of ionized hydrogen gas ("HII shells") seen in this photo. The "rings" near some of the bright stars are caused by internal reflections in the telescope. Technical information about this photo is available below.. But there is much more to discover on these WFI images of NGC 300! The WFI images obtained in several broad and narrow band filters from the ultraviolet to the near-infrared spectral region (U, B, V, R, I and H-alpha) allow a detailed study of groups of heavy, hot stars (known as "OB associations") and a large number of huge clouds of ionized hydrogen ("HII shells") in this galaxy. Corresponding studies have been carried out by Gieren's group, resulting in the discovery of an amazing number of OB associations, including a number of giant associations. These investigations, taken together with the observed distribution of the pulsation periods of the Cepheids, allow to better understand the history of star formation in NGC 300. For example, three distinct peaks in the number distribution of the pulsation periods of the Cepheids seem to indicate that there have been at least three different bursts of star formation within the past 100 million years. The large number of OB associations and HII shells ( PR Photo 18c/02 ) furthermore indicate the presence of a numerous, very young stellar population in NGC 300, aged only a few million years. Dark matter and the observed shapes of distant galaxies In early 2002, Thomas Erben and Mischa Schirmer from the "Institut für Astrophysik and extraterrestrische Forschung" ( IAEF , Universität Bonn, Germany), in the course of their ASTROVIRTEL programme, identified and retrieved all available broad-band and H-alpha images of NGC 300 available in the ESO Science Data Archive. Most of these have been observed for the project by Gieren and his colleagues, described above. However, the scientific interest of the German astronomers was very different from that of their colleagues and they were not at all concerned about the main object in the field, NGC 300. In a very different approach, they instead wanted to study those images to measure the amount of dark matter in the Universe, by means of the weak gravitational lensing effect produced by distant galaxy clusters. Various observations, ranging from the measurement of internal motions ("rotation curves") in spiral galaxies to the presence of hot X-ray gas in clusters of galaxies and the motion of galaxies in those clusters, indicate that there is about ten times more matter in the Universe than what is observed in the form of stars, gas and galaxies ("luminous matter"). As this additional matter does not emit light at any wavelengths, it is commonly referred to as "dark" matter - its true nature is yet entirely unclear. Insight into the distribution of dark matter in the Universe can be gained by looking at the shapes of images of very remote galaxies, billions of light-years away, cf. ESO PR 24/00. Light from such distant objects travels vast distances through space before arriving here on Earth, and whenever it passes heavy clusters of galaxies, it is bent a little due to the associated gravitational field. Thus, in long-exposure, high-quality images, this "weak lensing" effect can be perceived as a coherent pattern of distortion of the images of background galaxies. Gravitational lensing in the NGC 300 field ESO PR Photo 18d/02 ESO PR Photo 18d/02 [Preview - JPEG: 400 x 495 pix - 82k] [Full-Res - JPEG: 1304 x 1615 pix - 3.2M] Caption : PR Photo 18d/02 shows the distant cluster of galaxies CL0053-37 , as imaged on the WFI photo of the NGC 300 sky field. The elongated distribution of the cluster galaxies, as well as the presence of two large, early-type elliptical galaxies indicate that this cluster is still in the process of formation. Some of the galaxies appear to be merging. From the measured redshift ( z = 0.1625), a distance of about 2.1 billion light-years is deduced. Technical information about this photo is available below. ESO PR Photo 18e/02 ESO PR Photo 18e/02 [Preview - JPEG: 400 x 567 pix - 89k] [Normal - JPEG: 723 x 1024 pix - 424k] Caption : PR Photo 18e/02 is a "map" of the dark matter distribution (black contours) in the cluster of galaxies CL0053-37 (shown in PR Photo 18d/02 ), as obtained from the weak lensing effects detected in the WFI images, and the X-ray flux (green contours) taken from the All-Sky Survey carried out by the ROSAT satellite observatory. The distribution of galaxies resembles the elongated, dark-matter profile. Because of ROSAT's limited image sharpness (low "angular resolution"), it cannot be entirely ruled out that the observed X-ray emission is due to an active nucleus of a galaxy in CL0053-37, or even a foreground stellar binary system in NGC 300. The WFI NGC 300 images appeared promising for gravitational lensing research because of the exceptionally long total exposure time. Although the large foreground galaxy NGC 300 would block the light of tens of thousands of galaxies in the background, a huge number of others would still be visible in the outskirts of this sky field, making a search for clusters of galaxies and associated lensing effects quite feasible. To ensure the best possible image sharpness in the combined image, and thus to obtain the most reliable measurements of the shapes of the background objects, only red (R-band) images obtained under the best seeing conditions were combined. In order to provide additional information about the colours of these faint objects, a similar approach was adopted for images in the other bands as well. The German astronomers indeed measured a significant lensing effect for one of the galaxy clusters in the field ( CL0053-37 , see PR Photo 18d/02 ); the images of background galaxies around this cluster were noticeably distorted in the direction tangential to the cluster center. Based on the measured degree of distortion, a map of the distribution of (dark) matter in this direction was constructed ( PR Photo 18e/02 ). The separation of unlensed foreground (bluer) and lensed background galaxies (redder) greatly profited from the photometric measurements done by Gieren's group in the course of their work on the Cepheids in NGC 300. Assuming that the lensed background galaxies lie at a mean redshift of 1.0, i.e. a distance of 8 billion light-years, a mass of about 2 x 10 14 solar masses was obtained for the CL0053-37 cluster. This lensing analysis in the NGC 300 field is part of the Garching-Bonn Deep Survey (GaBoDS) , a weak gravitational lensing survey led by Peter Schneider (IAEF). GaBoDS is based on exposures made with the WFI and until now a sky area of more than 12 square degrees has been imaged during very good seeing conditions. Once complete, this investigation will allow more insight into the distribution and cosmological evolution of galaxy cluster masses, which in turn provide very useful information about the structure and history of the Universe. One hundred thousand galaxies ESO PR Photo 18f/02 ESO PR Photo 18f/02 [Preview - JPEG: 400 x 526 pix - 93k] [Full-Res - JPEG: 756 x 994 pix - 1.0M] Caption : PR Photo 18f/02 shows a group of galaxies , seen on the NGC 300 images. They are all quite red and their similar colours indicate that they must be about equally distant. They probably constitute a distant cluster, now in the stage of formation. Technical information about this photo is available below. ESO PR Photo 18g/02 ESO PR Photo 18g/02 [Preview - JPEG: 469 x 400 pix - xxk] [Full-Res - JPEG: 1055 x 899 pix - 968k] Caption : PR Photo 18g/02 shows an area in the outer regions of NGC 300. Disks of spiral galaxies are usually quite "thin" (some hundred light-years), as compared to their radial extent (tens of thousands of light-years across). In areas where only small amounts of dust are present, it is possible to see much more distant galaxies right through the disk of NGC 300 , as demonstrated by this image. Technical information about this photo is available below. ESO PR Photo 18h/02 ESO PR Photo 18h/02 [Preview - JPEG: 451 x 400 pix - 89k] [Normal - JPEG: 902 x 800 pix - 856k] [Full-Res - JPEG: 2439 x 2163 pix - 6.0M] Caption : PR Photo 18h/02 is an astronomers' joy ride to infinity. Such a rarely seen view of our universe imparts a feeling of the vast distances in space. In the upper half of the image, the outer region of NGC 300 is resolved into innumerable stars, while in the lower half, myriads of galaxies - a thousand times more distant - catch the eye. In reality, many of them are very similar to NGC 300, they are just much more remote. In addition to allowing a detailed investigation of dark matter and lensing effects in this field, the present, very "deep" colour image of NGC 300 invites to perform a closer inspection of the background galaxy population itself . No less than about 100,000 galaxies of all types are visible in this amazing image. Three known quasars ([ICS96] 005342.1-375947, [ICS96] 005236.1-374352, [ICS96] 005336.9-380354) with redshifts 2.25, 2.35 and 2.75, respectively, happen to lie inside this sky field, together with many interacting galaxies, some of which feature tidal tails. There are also several groups of highly reddened galaxies - probably distant clusters in formation, cf. PR Photo 18f/02 . Others are seen right through the outer regions of NGC 300, cf. PR Photo 18g/02 . More detailed investigations of the numerous galaxies in this field are now underway. From the nearby spiral galaxy NGC 300 to objects in the young Universe, it is all there, truly an astronomical treasure trove, cf. PR Photo 18h/02 ! Notes [1]: "NGC" means "New General Catalogue" (of nebulae and clusters) that was published in 1888 by J.L.E. Dreyer in the "Memoirs of the Royal Astronomical Society". [2]: Other colour composite images from the Wide-Field Imager at the MPG/ESO 2.2-m telescope at the La Silla Observatory are available at the ESO Outreach website at http://www.eso.org/esopia"bltxt">Tarantula Nebula in the LMC, cf. ESO PR Photos 14a-g/02. [3]: 1 Terabyte = 10 12 byte = 1000 Gigabyte = 1 million million byte. Technical information about the photos PR Photo 18a/02 and all cutouts were made from 110 WFI images obtained in the B-band (total exposure time 11.0 hours, rendered as blue), 105 images in the V-band (10.4 hours, green), 42 images in the R-band (4.2 hours, red) and 21 images through a H-alpha filter (5.1 hours, red). In total, 278 images of NGC 300 have been assembled to produce this colour image, together with about as many calibration images (biases, darks and flats). 150 GB of hard disk space were needed to store all uncompressed raw data, and about 1 TB of temporary files was produced during the extensive data reduction. Parallel processing of all data sets took about two weeks on a four-processor Sun Enterprise 450 workstation. The final colour image was assembled in Adobe Photoshop. To better show all details, the overall brightness of NGC 300 was reduced as compared to the outskirts of the field. The (red) "rings" near some of the bright stars originate from the H-alpha frames - they are caused by internal reflections in the telescope. The images were prepared by Mischa Schirmer at the Institut für Astrophysik und Extraterrestrische Forschung der Universität Bonn (IAEF) by means of a software pipeline specialised for reduction of multiple CCD wide-field imaging camera data. The raw data were extracted from the public sector of the ESO Science Data Archive. The extensive observations were performed at the ESO La Silla Observatory by Wolfgang Gieren, Pascal Fouque, Frederic Pont, Hermann Boehnhardt and La Silla staff, during 34 nights between July 1999 and January 2000. Some additional observations taken during the second half of 2000 were retrieved by Mischa Schirmer and Thomas Erben from the ESO archive. CD-ROM with full-scale NGC 300 image soon available PR Photo 18a/02 has been compressed by a factor 4 (2 x 2 rebinning). For PR Photos 18b-h/02 , the largest-size versions of the images are shown at the original scale (1 pixel = 0.238 arcsec). A full-resolution TIFF-version (approx. 8000 x 8000 pix; 200 Mb) of PR Photo 18a/02 will shortly be made available by ESO on a special CD-ROM, together with some other WFI images of the same size. An announcement will follow in due time.

Google Books: making the public domain universally accessible

NASA Astrophysics Data System (ADS)

Langley, Adam; Bloomberg, Dan S.

2007-01-01

Google Book Search is working with libraries and publishers around the world to digitally scan books. Some of those works are now in the public domain and, in keeping with Google's mission to make all the world's information useful and universally accessible, we wish to allow users to download them all. For users, it is important that the files are as small as possible and of printable quality. This means that a single codec for both text and images is impractical. We use PDF as a container for a mixture of JBIG2 and JPEG2000 images which are composed into a final set of pages. We discuss both the implementation of an open source JBIG2 encoder, which we use to compress text data, and the design of the infrastructure needed to meet the technical, legal and user requirements of serving many scanned works. We also cover the lessons learnt about dealing with different PDF readers and how to write files that work on most of the readers, most of the time.

A Robust Image Watermarking in the Joint Time-Frequency Domain

NASA Astrophysics Data System (ADS)

Öztürk, Mahmut; Akan, Aydın; Çekiç, Yalçın

2010-12-01

With the rapid development of computers and internet applications, copyright protection of multimedia data has become an important problem. Watermarking techniques are proposed as a solution to copyright protection of digital media files. In this paper, a new, robust, and high-capacity watermarking method that is based on spatiofrequency (SF) representation is presented. We use the discrete evolutionary transform (DET) calculated by the Gabor expansion to represent an image in the joint SF domain. The watermark is embedded onto selected coefficients in the joint SF domain. Hence, by combining the advantages of spatial and spectral domain watermarking methods, a robust, invisible, secure, and high-capacity watermarking method is presented. A correlation-based detector is also proposed to detect and extract any possible watermarks on an image. The proposed watermarking method was tested on some commonly used test images under different signal processing attacks like additive noise, Wiener and Median filtering, JPEG compression, rotation, and cropping. Simulation results show that our method is robust against all of the attacks.

First-Ever Census of Variable Mira-Type Stars in Galaxy Outside the Local Group

NASA Astrophysics Data System (ADS)

2003-05-01

First-Ever Census of Variable Mira-Type Stars in Galaxy Outsidethe Local Group Summary An international team led by ESO astronomer Marina Rejkuba [1] has discovered more than 1000 luminous red variable stars in the nearby elliptical galaxy Centaurus A (NGC 5128) . Brightness changes and periods of these stars were measured accurately and reveal that they are mostly cool long-period variable stars of the so-called "Mira-type" . The observed variability is caused by stellar pulsation. This is the first time a detailed census of variable stars has been accomplished for a galaxy outside the Local Group of Galaxies (of which the Milky Way galaxy in which we live is a member). It also opens an entirely new window towards the detailed study of stellar content and evolution of giant elliptical galaxies . These massive objects are presumed to play a major role in the gravitational assembly of galaxy clusters in the Universe (especially during the early phases). This unprecedented research project is based on near-infrared observations obtained over more than three years with the ISAAC multi-mode instrument at the 8.2-m VLT ANTU telescope at the ESO Paranal Observatory . PR Photo 14a/03 : Colour image of the peculiar galaxy Centaurus A . PR Photo 14b/03 : Location of the fields in Centaurus A, now studied. PR Photo 14c/03 : "Field 1" in Centaurus A (visual light; FORS1). PR Photo 14d/03 : "Field 2" in Centaurus A (visual light; FORS1). PR Photo 14e/03 : "Field 1" in Centaurus A (near-infrared; ISAAC). PR Photo 14f/03 : "Field 2" in Centaurus A (near-infrared; ISAAC). PR Photo 14g/03 : Light variation of six variable stars in Centaurus A PR Photo 14h/03 : Light variation of stars in Centaurus A (Animated GIF) PR Photo 14i/03 : Light curves of four variable stars in Centaurus A. Mira-type variable stars Among the stars that are visible in the sky to the unaided eye, roughly one out of three hundred (0.3%) displays brightness variations and is referred to by astronomers as a "variable star". The percentage is much higher among large, cool stars ("red giants") - in fact, almost all luminous stars of that type are variable. Such stars are known as Mira-variables ; the name comes from the most prominent member of this class, Omicron Ceti in the constellation Cetus (The Whale), also known as "Stella Mira" (The Wonderful Star). Its brightness changes with a period of 332 days and it is about 1500 times brighter at maximum (visible magnitude 2 and one of the fifty brightest stars in the sky) than at minimum (magnitude 10 and only visible in small telescopes) [2]. Stars like Omicron Ceti are nearing the end of their life. They are very large and have sizes from a few hundred to about a thousand times that of the Sun. The brightness variation is due to pulsations during which the star's temperature and size change dramatically. In the following evolutionary phase, Mira-variables will shed their outer layers into surrounding space and become visible as planetary nebulae with a hot and compact star (a "white dwarf") at the middle of a nebula of gas and dust (cf. the "Dumbbell Nebula" - ESO PR Photo 38a-b/98 ). Several thousand Mira-type stars are currently known in the Milky Way galaxy and a few hundred have been found in other nearby galaxies, including the Magellanic Clouds. The peculiar galaxy Centaurus A ESO PR Photo 14a/03 ESO PR Photo 14a/03 [Preview - JPEG: 400 x 451 pix - 53k [Normal - JPEG: 800 x 903 pix - 528k] [Hi-Res - JPEG: 3612 x 4075 pix - 8.4M] ESO PR Photo 14b/03 ESO PR Photo 14b/03 [Preview - JPEG: 570 x 400 pix - 52k [Normal - JPEG: 1140 x 800 pix - 392k] ESO PR Photo 14c/03 ESO PR Photo 14c/03 [Preview - JPEG: 400 x 451 pix - 61k [Normal - JPEG: 800 x 903 pix - 768k] ESO PR Photo 14d/03 ESO PR Photo 14d/03 [Preview - JPEG: 400 x 451 pix - 56k [Normal - JPEG: 800 x 903 pix - 760k] Captions : PR Photo 14a/03 is a colour composite photo of the peculiar galaxy Centaurus A (NGC 5128) , obtained with the Wide-Field Imager (WFI) camera at the ESO/MPG 2.2-m telescope on La Silla. It is based on a total of nine 3-min exposures made on March 25, 1999, through different broad-band optical filters (B(lue) - total exposure time 9 min - central wavelength 456 nm - here rendered as blue; V(isual) - 540 nm - 9 min - green; I(nfrared) - 784 nm - 9 min - red); it was prepared from files in the ESO Science Data Archive by ESO-astronomer Benoît Vandame . The elliptical shape and the central dust band, the imprint of a galaxy collision, are well visible. PR Photo 14b/03 identifies the two regions of Centaurus A (the rectangles in the upper left and lower right inserts) in which a search for variable stars was made during the present research project: "Field 1" is located in an area north-east of the center in which many young stars are present. This is also the direction in which an outflow ("jet") is seen on deep optical and radio images. "Field 2" is positioned in the galaxy's halo, south of the centre. High-resolution, very deep colour photos of these two fields and their immediate surroundings are shown in PR Photos 14c-d/03 . They were produced by means of CCD-frames obtained in July 1999 through U- and V-band optical filters with the VLT FORS1 multi-mode instrument at the 8.2-m VLT ANTU telescope on Paranal. Note the great variety of object types and colours, including many background galaxies which are seen through these less dense regions of Centaurus A . The total exposure time was 30 min in each filter and the seeing was excellent, 0.5 arcsec. The original pixel size is 0.196 arcsec and the fields measure 6.7 x 6.7 arcmin 2 (2048 x 2048 pix 2 ). North is up and East is left on all photos. Centaurus A (NGC 5128) is the nearest giant galaxy, at a distance of about 13 million light-years. It is located outside the Local Group of Galaxies to which our own galaxy, the Milky Way, and its satellite galaxies, the Magellanic Clouds, belong. Centaurus A is seen in the direction of the southern constellation Centaurus. It is of elliptical shape and is currently merging with a companion galaxy, making it one of the most spectacular objects in the sky, cf. PR Photo 14a/03 . It possesses a very heavy black hole at its centre (see ESO PR 04/01 ) and is a source of strong radio and X-ray emission. During the present research programme, two regions in Centaurus A were searched for stars of variable brightness; they are located in the periphery of this peculiar galaxy, cf. PR Photos 14b-d/03 . An outer field ("Field 1") coincides with a stellar shell with many blue and luminous stars produced by the on-going galaxy merger; it lies at a distance of 57,000 light-years from the centre. The inner field ("Field 2") is more crowded and is situated at a projected distance of about 30,000 light-years from the centre.. Three years of VLT observations ESO PR Photo 14e/03 ESO PR Photo 14e/03 [Preview - JPEG: 400 x 447 pix - 120k [Normal - JPEG: 800 x 894 pix - 992k] ESO PR Photo 14f/03 ESO PR Photo 14f/03 [Preview - JPEG: 400 x 450 pix - 96k [Normal - JPEG: 800 x 899 pix - 912k] Caption : PR Photos 14e-f/03 are colour composites of two small fields ("Field 1" and "Field 2") in the peculiar galaxy Centaurus A (NGC 5128) , based on exposures through three near-infrared filters (the J-, H- and K-bands at wavelengths 1.2, 1.6 and 2.2 µm, respectively) with the ISAAC multi-mode instrument at the 8.2-m VLT ANTU telescope at the ESO Paranal observatory. The corresponding areas are outlined within the two inserts in PR Photo 14b/03 and may be compared with the visual images from FORS1 ( PR Photos 14c-d/03 ). These ISAAC photos are the deepest near-infrared images ever obtained in this galaxy and show thousands of its stars of different colours. In the present colour-coding, the redder an image, the cooler is the star. The original pixel size is 0.15 arcsec and both fields measure 2.5 x 2.5 arcmin 2. North is up and East is left. Under normal circumstances, any team of professional astronomers will have access to the largest telescopes in the world for only a very limited number of consecutive nights each year. However, extensive searches for variable stars like the present require repeated observations lasting minutes-to-hours over periods of months-to-years. It is thus not feasible to perform such observations in the classical way in which the astronomers travel to the telescope each time. Fortunately, the operational system of the VLT at the ESO Paranal Observatory (Chile) is also geared to encompass this kind of long-term programme. Between April 1999 and July 2002, the 8.2-m VLT ANTU telescope on Cerro Paranal in Chile) was operated in service mode on many occasions to obtain K-band images of the two fields in Centaurus A by means of the near-infrared ISAAC multi-mode instrument. Each field was observed over 20 times in the course of this three-year period ; some of the images were obtained during exceptional seeing conditions of 0.30 arcsec. One set of complementary optical images was obtained with the FORS1 multi-mode instrument (also on VLT ANTU) in July 1999. Each image from the ISAAC instrument covers a sky field measuring 2.5 x 2.5 arcmin 2. The combined images, encompassing a total exposure of 20 hours are indeed the deepest infrared images ever made of the halo of any galaxy as distant as Centaurus A , about 13 million light-years. Discovering one thousand Mira variables ESO PR Photo 14g/03 ESO PR Photo 14g/03 [Preview - JPEG: 400 x 480 pix - 61k [Normal - JPEG: 800 x 961 pix - 808k] ESO PR Photo 14h/03 ESO PR Photo 14h/03 [Animated GIF: 263 x 267 pix - 56k ESO PR Photo 14i/03 ESO PR Photo 14i/03 [Preview - JPEG: 480 x 400 pix - 33k [Normal - JPEG: 959 x 800 pix - 152k] Captions : PR Photo 14g/03 shows a zoomed-in area within "Field 2" in Centaurus A , from the ISAAC colour image shown in PR Photo 14e/03 . Nearly all red stars in this area are of the variable Mira-type. The brightness variation of some stars (labelled A-D) is demonstrated in the animated-GIF image PR Photo 14h/03 . The corresponding light curves (brightness over the pulsation period) are shown in PR Photo 14i/03 . Here the abscissa indicates the pulsation phase (one full period corresponds to the interval from 0 to 1) and the ordinate unit is near-infrared K s -magnitude. One magnitude corresponds to a difference in brightness of a factor 2.5. Once the lengthy observations were completed, two further steps were needed to identify the variable stars in Centaurus A . First, each ISAAC frame was individually processed to identify the thousands and thousands of faint point-like images (stars) visible in these fields. Next, all images were compared using a special software package ("DAOPHOT") to measure the brightness of all these stars in the different frames, i.e., as a function of time. While most stars in these fields as expected were found to have constant brightness, more than 1000 stars displayed variations in brightness with time; this is by far the largest number of variable stars ever discovered in a galaxy outside the Local Group of Galaxies. The detailed analysis of this enormous dataset took more than a year. Most of the variable stars were found to be of the Mira-type and their light curves (brightness over the pulsation period) were measured, cf. PR Photo 14i/03 . For each of them, values of the characterising parameters, the period (days) and brightness amplitude (magnitudes) were determined. A catalogue of the newly discovered variable stars in Centaurus A has now been made available to the astronomical community via the European research journal Astronomy & Astrophysics. Marina Rejkuba is pleased and thankful: "We are really very fortunate to have carried out this ambitious project so successfully. It all depended critically on different factors: the repeated granting of crucial observing time by the ESO Observing Programmes Committee over different observing periods in the face of rigorous international competition, the stability and reliability of the telescope and the ISAAC instrument over a period of more than three years and, not least, the excellent quality of the service mode observations, so efficiently performed by the staff at the Paranal Observatory." What have we learned about Centaurus A? The present study of variable stars in this giant elliptical galaxy is the first-ever of its kind. Although the evaluation of the very large observational data material is still not finished, it has already led to a number of very useful scientific results. Confirmation of the presence of an intermediate-age population Based on earlier research (optical and near-IR colour-magnitude diagrams of the stars in the fields), the present team of astronomers had previously detected the presence of intermediate-age and young stellar populations in the halo of this galaxy. The youngest stars appear to be aligned with the powerful jet produced by the massive black hole at the centre. Some of the very luminous red variable stars now discovered confirm the presence of a population of intermediate-age stars in the halo of this galaxy. It also contributes to our understanding of how giant elliptical galaxies form. New measurement of the distance to Centaurus A The pulsation of Mira-type variable stars obeys a period-luminosity relation. The longer its period, the more luminous is a Mira-type star. This fact makes it possible to use Mira-type stars as "standard candles" (objects of known intrinsic luminosity) for distance determinations. They have in fact often been used in this way to measure accurate distances to more nearby objects, e.g., to individual clusters of stars and to the center in our Milky Way galaxy, and also to galaxies in the Local Group, in particular the Magellanic Clouds. This method works particularly well with infrared measurements and the astronomers were now able to measure the distance to Centaurus A in this new way. They found 13.7 ± 1.9 million light-years , in general agreement with and thus confirming other methods. Study of stellar population gradients in the halo of a giant elliptical galaxy The two fields here studied contain different populations of stars. A clear dependence on the location (a "gradient") within the galaxy is observed, which can be due to differences in chemical composition or age, or to a combination of both. Understanding the cause of this gradient will provide additional clues to how Centaurus A - and indeed all giant elliptical galaxies - was formed and has since evolved. Comparison with other well-known nearby galaxies Past searches have discovered Mira-type variable stars thoughout the Milky Way, our home galaxy, and in other nearby galaxies in the Local Group. However, there are no giant elliptical galaxies like Centaurus A in the Local Group and this is the first time it has been possible to identify this kind of stars in that type of galaxy. The present investigation now opens a new window towards studies of the stellar constituents of such galaxies .

Forensic Analysis of Digital Image Tampering

DTIC Science & Technology

2004-12-01

analysis of when each method fails, which Chapter 4 discusses. Finally, a test image containing an invisible watermark using LSB steganography is...2.2 – Example of invisible watermark using Steganography Software F5 ............. 8 Figure 2.3 – Example of copy-move image forgery [12...Figure 3.11 – Algorithm for JPEG Block Technique ....................................................... 54 Figure 3.12 – “Forged” Image with Result

Video segmentation for post-production

NASA Astrophysics Data System (ADS)

Wills, Ciaran

2001-12-01

Specialist post-production is an industry that has much to gain from the application of content-based video analysis techniques. However the types of material handled in specialist post-production, such as television commercials, pop music videos and special effects are quite different in nature from the typical broadcast material which many video analysis techniques are designed to work with; shots are short and highly dynamic, and the transitions are often novel or ambiguous. We address the problem of scene change detection and develop a new algorithm which tackles some of the common aspects of post-production material that cause difficulties for past algorithms, such as illumination changes and jump cuts. Operating in the compressed domain on Motion JPEG compressed video, our algorithm detects cuts and fades by analyzing each JPEG macroblock in the context of its temporal and spatial neighbors. Analyzing the DCT coefficients directly we can extract the mean color of a block and an approximate detail level. We can also perform an approximated cross-correlation between two blocks. The algorithm is part of a set of tools being developed to work with an automated asset management system designed specifically for use in post-production facilities.

Privacy-preserving photo sharing based on a public key infrastructure

NASA Astrophysics Data System (ADS)

Yuan, Lin; McNally, David; Küpçü, Alptekin; Ebrahimi, Touradj

2015-09-01

A significant number of pictures are posted to social media sites or exchanged through instant messaging and cloud-based sharing services. Most social media services offer a range of access control mechanisms to protect users privacy. As it is not in the best interest of many such services if their users restrict access to their shared pictures, most services keep users' photos unprotected which makes them available to all insiders. This paper presents an architecture for a privacy-preserving photo sharing based on an image scrambling scheme and a public key infrastructure. A secure JPEG scrambling is applied to protect regional visual information in photos. Protected images are still compatible with JPEG coding and therefore can be viewed by any one on any device. However, only those who are granted secret keys will be able to descramble the photos and view their original versions. The proposed architecture applies an attribute-based encryption along with conventional public key cryptography, to achieve secure transmission of secret keys and a fine-grained control over who may view shared photos. In addition, we demonstrate the practical feasibility of the proposed photo sharing architecture with a prototype mobile application, ProShare, which is built based on iOS platform.

Medical Image Compression Based on Vector Quantization with Variable Block Sizes in Wavelet Domain

PubMed Central

Jiang, Huiyan; Ma, Zhiyuan; Hu, Yang; Yang, Benqiang; Zhang, Libo

2012-01-01

An optimized medical image compression algorithm based on wavelet transform and improved vector quantization is introduced. The goal of the proposed method is to maintain the diagnostic-related information of the medical image at a high compression ratio. Wavelet transformation was first applied to the image. For the lowest-frequency subband of wavelet coefficients, a lossless compression method was exploited; for each of the high-frequency subbands, an optimized vector quantization with variable block size was implemented. In the novel vector quantization method, local fractal dimension (LFD) was used to analyze the local complexity of each wavelet coefficients, subband. Then an optimal quadtree method was employed to partition each wavelet coefficients, subband into several sizes of subblocks. After that, a modified K-means approach which is based on energy function was used in the codebook training phase. At last, vector quantization coding was implemented in different types of sub-blocks. In order to verify the effectiveness of the proposed algorithm, JPEG, JPEG2000, and fractal coding approach were chosen as contrast algorithms. Experimental results show that the proposed method can improve the compression performance and can achieve a balance between the compression ratio and the image visual quality. PMID:23049544

Medical image compression based on vector quantization with variable block sizes in wavelet domain.

PubMed

Jiang, Huiyan; Ma, Zhiyuan; Hu, Yang; Yang, Benqiang; Zhang, Libo

2012-01-01

An optimized medical image compression algorithm based on wavelet transform and improved vector quantization is introduced. The goal of the proposed method is to maintain the diagnostic-related information of the medical image at a high compression ratio. Wavelet transformation was first applied to the image. For the lowest-frequency subband of wavelet coefficients, a lossless compression method was exploited; for each of the high-frequency subbands, an optimized vector quantization with variable block size was implemented. In the novel vector quantization method, local fractal dimension (LFD) was used to analyze the local complexity of each wavelet coefficients, subband. Then an optimal quadtree method was employed to partition each wavelet coefficients, subband into several sizes of subblocks. After that, a modified K-means approach which is based on energy function was used in the codebook training phase. At last, vector quantization coding was implemented in different types of sub-blocks. In order to verify the effectiveness of the proposed algorithm, JPEG, JPEG2000, and fractal coding approach were chosen as contrast algorithms. Experimental results show that the proposed method can improve the compression performance and can achieve a balance between the compression ratio and the image visual quality.

Mixed raster content (MRC) model for compound image compression

NASA Astrophysics Data System (ADS)

de Queiroz, Ricardo L.; Buckley, Robert R.; Xu, Ming

1998-12-01

This paper will describe the Mixed Raster Content (MRC) method for compressing compound images, containing both binary test and continuous-tone images. A single compression algorithm that simultaneously meets the requirements for both text and image compression has been elusive. MRC takes a different approach. Rather than using a single algorithm, MRC uses a multi-layered imaging model for representing the results of multiple compression algorithms, including ones developed specifically for text and for images. As a result, MRC can combine the best of existing or new compression algorithms and offer different quality-compression ratio tradeoffs. The algorithms used by MRC set the lower bound on its compression performance. Compared to existing algorithms, MRC has some image-processing overhead to manage multiple algorithms and the imaging model. This paper will develop the rationale for the MRC approach by describing the multi-layered imaging model in light of a rate-distortion trade-off. Results will be presented comparing images compressed using MRC, JPEG and state-of-the-art wavelet algorithms such as SPIHT. MRC has been approved or proposed as an architectural model for several standards, including ITU Color Fax, IETF Internet Fax, and JPEG 2000.

Mount Shasta Snowpack

NASA Technical Reports Server (NTRS)

2002-01-01

Full-size images June 17, 2001 (2.0 MB JPEG) June 14, 2000 (2.1 MB JPEG) Light snowfall in the winter of 2000-01 led to a dry summer in the Pacific Northwest. The drought led to a conflict between farmers and fishing communities in the Klamath River Basin over water rights, and a series of forest fires in Washington, Oregon, and Northern California. The pair of images above, both acquired by the Enhanced Thematic Mapper Plus (ETM+) aboard the Landsat 7 satellite, show the snowpack on Mt. Shasta in June 2000 and 2001. On June 14, 2000, the snow extends to the lower slopes of the 4,317-meter (14,162-foot) volcano. At nearly the same time this year (June 17, 2001) the snow had retreated well above the tree-line. The drought in the region was categorized as moderate to severe by the National Oceanographic and Atmospheric Administration (NOAA), and the United States Geological Survey (USGS) reported that streamflow during June was only about 25 percent of the average. Above and to the left of Mt. Shasta is Lake Shastina, a reservoir which is noticeably lower in the 2001 image than the 2000 image. Images courtesy USGS EROS Data Center and the Landsat 7 Science Team

JPEG2000-coded image error concealment exploiting convex sets projections.

PubMed

Atzori, Luigi; Ginesu, Giaime; Raccis, Alessio

2005-04-01

Transmission errors in JPEG2000 can be grouped into three main classes, depending on the affected area: LL, high frequencies at the lower decomposition levels, and high frequencies at the higher decomposition levels. The first type of errors are the most annoying but can be concealed exploiting the signal spatial correlation like in a number of techniques proposed in the past; the second are less annoying but more difficult to address; the latter are often imperceptible. In this paper, we address the problem of concealing the second class or errors when high bit-planes are damaged by proposing a new approach based on the theory of projections onto convex sets. Accordingly, the error effects are masked by iteratively applying two procedures: low-pass (LP) filtering in the spatial domain and restoration of the uncorrupted wavelet coefficients in the transform domain. It has been observed that a uniform LP filtering brought to some undesired side effects that negatively compensated the advantages. This problem has been overcome by applying an adaptive solution, which exploits an edge map to choose the optimal filter mask size. Simulation results demonstrated the efficiency of the proposed approach.

Improved compression technique for multipass color printers

NASA Astrophysics Data System (ADS)

Honsinger, Chris

1998-01-01

A multipass color printer prints a color image by printing one color place at a time in a prescribed order, e.g., in a four-color systems, the cyan plane may be printed first, the magenta next, and so on. It is desirable to discard the data related to each color plane once it has been printed, so that data from the next print may be downloaded. In this paper, we present a compression scheme that allows the release of a color plane memory, but still takes advantage of the correlation between the color planes. The compression scheme is based on a block adaptive technique for decorrelating the color planes followed by a spatial lossy compression of the decorrelated data. A preferred method of lossy compression is the DCT-based JPEG compression standard, as it is shown that the block adaptive decorrelation operations can be efficiently performed in the DCT domain. The result of the compression technique are compared to that of using JPEG on RGB data without any decorrelating transform. In general, the technique is shown to improve the compression performance over a practical range of compression ratios by at least 30 percent in all images, and up to 45 percent in some images.

How Old is the Milky Way ?

NASA Astrophysics Data System (ADS)

2004-08-01

VLT Observations of Beryllium in Two Old Stars Clock the Beginnings Summary Observations by an international team of astronomers [1] with the UVES spectrometer on ESO's Very Large Telescope at the Paranal Observatory (Chile) have thrown new light on the earliest epoch of the Milky Way galaxy. The first-ever measurement of the Beryllium content in two stars in a globular cluster (NGC 6397) - pushing current astronomical technology towards the limit - has made it possible to study the early phase between the formation of the first generation of stars in the Milky Way and that of this stellar cluster. This time interval was found to amount to 200 - 300 million years. The age of the stars in NGC 6397, as determined by means of stellar evolution models, is 13,400 ± 800 million years. Adding the two time intervals gives the age of the Milky Way, 13,600 ± 800 million years. The currently best estimate of the age of the Universe, as deduced, e.g., from measurements of the Cosmic Microwave Background, is 13,700 million years. The new observations thus indicate that the first generation of stars in the Milky Way galaxy formed soon after the end of the ~200 million-year long "Dark Ages" that succeeded the Big Bang. PR Photo 23a/04: Globular cluster NGC 6397 PR Photo 23b/04: The stars A0228 and A2111 in NGC 6397. PR Photo 23c/04: UVES spectra of the stars A0228 and A2111 in NGC 6397 with Beryllium lines. The age of the Milky Way ESO PR Photo 23a/04 ESO PR Photo 23a/04 Globular Cluster NGC 6397 [Preview - JPEG: 400 x 472 pix - 316k] [Normal - JPEG: 800 x 943 pix - 943k] [Full Res - JPEG: 4000 x 4717 pix - 16.3M] Caption: ESO PR Photo 23a/04 shows the globular cluster NGC 6397, located at a distance of approx. 7,200 light-years in the southern constellation Ara. It has undergone a "core collapse" and the central area is very dense. It contains about 400,000 stars and its age (based on evolutionary models) is 13,400 ± 800 million years. The photo is a composite of exposures in the B- , V- and I-bands obtained in the frame of the Pilot Stellar Survey with the Wide-Field-Imager (WFI) camera at the 2.2-m ESO/MPI telescope at the ESO La Silla Observatory. It was prepared and provided by the ESO Imaging Survey team. The spikes seen at some of the brighter stars are caused by the effect of overexposure (CCD "bleeding"). How old is the Milky Way ? When did the first stars in our galaxy ignite ? A proper understanding of the formation and evolution of the Milky Way system is crucial for our knowledge of the Universe. Nevertheless, the related observations are among the most difficult ones, even with the most powerful telescopes available, as they involve a detailed study of old, remote and mostly faint celestial objects. Globular clusters and the ages of stars Modern astrophysics is capable of measuring the ages of certain stars, that is the time elapsed since they were formed by condensation in huge interstellar clouds of gas and dust. Some stars are very "young" in astronomical terms, just a few million years old like those in the nearby Orion Nebula. The Sun and its planetary system was formed about 4,560 million years ago, but many other stars formed much earlier. Some of the oldest stars in the Milky Way are found in large stellar clusters, in particular in "globular clusters" (PR Photo 23a/04), so called because of their spheroidal shape. Stars belonging to a globular cluster were born together, from the same cloud and at the same time. Since stars of different masses evolve at different rates, it is possible to measure the age of globular clusters with a reasonably good accuracy. The oldest ones are found to be more than 13,000 million years old. Still, those cluster stars were not the first stars to be formed in the Milky Way. We know this, because they contain small amounts of certain chemical elements which must have been synthesized in an earlier generation of massive stars that exploded as supernovae after a short and energetic life. The processed material was deposited in the clouds from which the next generations of stars were made, cf. ESO PR 03/01. Despite intensive searches, it has until now not been possible to find less massive stars of this first generation that might still be shining today. Hence, we do not know when these first stars were formed. For the time being, we can only say that the Milky Way must be older than the oldest globular cluster stars. But how much older? Beryllium to the rescue What astrophysicists would like to have is therefore a method to measure the time interval between the formation of the first stars in the Milky Way (of which many quickly became supernovae) and the moment when the stars in a globular cluster of known age were formed. The sum of this time interval and the age of those stars would then be the age of the Milky Way. New observations with the VLT at ESO's Paranal Observatory have now produced a break-through in this direction. The magic element is "Beryllium"! Beryllium is one of the lightest elements [2] - the nucleus of the most common and stable isotope (Beryllium-9) consists of four protons and five neutrons. Only hydrogen, helium and lithium are lighter. But while those three were produced during the Big Bang, and while most of the heavier elements were produced later in the interior of stars, Beryllium-9 can only be produced by "cosmic spallation". That is, by fragmentation of fast-moving heavier nuclei - originating in the mentioned supernovae explosions and referred to as energetic "galactic cosmic rays" - when they collide with light nuclei (mostly protons and alpha particles, i.e. hydrogen and helium nuclei) in the interstellar medium. Galactic cosmic rays and the Beryllium clock The galactic cosmic rays travelled all over the early Milky Way, guided by the cosmic magnetic field. The resulting production of Beryllium was quite uniform within the galaxy. The amount of Beryllium increased with time and this is why it might act as a "cosmic clock". The longer the time that passed between the formation of the first stars (or, more correctly, their quick demise in supernovae explosions) and the formation of the globular cluster stars, the higher was the Beryllium content in the interstellar medium from which they were formed. Thus, assuming that this Beryllium is preserved in the stellar atmosphere, the more Beryllium is found in such a star, the longer is the time interval between the formation of the first stars and of this star. The Beryllium may therefore provide us with unique and crucial information about the duration of the early stages of the Milky Way. A very difficult observation So far, so good. The theoretical foundations for this dating method were developed during the past three decades and all what is needed is then to measure the Beryllium content in some globular cluster stars. But this is not as simple as it sounds! The main problem is that Beryllium is destroyed at temperatures above a few million degrees. When a star evolves towards the luminous giant phase, violent motion (convection) sets in, the gas in the upper stellar atmosphere gets into contact with the hot interior gas in which all Beryllium has been destroyed and the initial Beryllium content in the stellar atmosphere is thus significantly diluted. To use the Beryllium clock, it is therefore necessary to measure the content of this element in less massive, less evolved stars in the globular cluster. And these so-called "turn-off (TO) stars" are intrinsically faint. In fact, the technical problem to overcome is three-fold: First, all globular clusters are quite far away and as the stars to be measured are intrinsically faint, they appear quite faint in the sky. Even in NGC6397, the second closest globular cluster, the TO stars have a visual magnitude of ~16, or 10000 times fainter than the faintest star visible to the unaided eye. Secondly, there are only two Beryllium signatures (spectral lines) visible in the stellar spectrum and as these old stars do contain comparatively little Beryllium, those lines are very weak, especially when compared to neighbouring spectral lines from other elements. And third, the two Beryllium lines are situated in a little explored spectral region at wavelength 313 nm, i.e., in the ultraviolet part of the spectrum that is strongly affected by absorption in the terrestrial atmosphere near the cut-off at 300 nm, below which observations from the ground are no longer possible. It is thus no wonder that such observations had never been made before, the technical difficulties were simply unsurmountable. VLT and UVES do the job ESO PR Photo 23b/04 ESO PR Photo 23b/04 Stars A0228 and A2111 in NGC 6397 [Preview - JPEG: 580 x 400 pix - 143k] [Normal - JPEG: 1160 x 800 pix - 33k] ESO PR Photo 23c/04 ESO PR Photo 23c/04 UVES spectra of the stars A0228 and A2111 in Globular Cluster NGC 6397 [Preview - JPEG: 400 x 468 pix - 115k] [Normal - JPEG: 800 x 925 pix - 272k] Captions: ESO PR Photo 23b/04 identifies the two stars in the globular cluster NGC 6397 for which spectra were obtained with the UVES spectrometer on the VLT (at the centre of the fields shown). The photos have been extracted from PR Photo 23a/04 by the Wide-Field-Imager (WFI) camera at the 2.2-m ESO/MPI telescope at the ESO La Silla Observatory. ESO PR Photo 23c/04 is a reproduction of a small wavelength region of the spectra obtained with the UVES spectrometer at the 8.2-m Kueyen telescope at Paranal of these stars (above), together with that of another nearby star, HD 218502, a field star in which the Beryllium lines are also visible (below). This star, however, is not a member of a cluster and its age is not well known. The achieved signal-to-noise ratios are indicated. The best-fitting synthetic spectra are show as red dots; in the spectrum of A2111, the blue dashed lines illustrate the accuracy of the fit - they correspond to a variation of the Beryllium content by approx. ± 50% (0.2 dex). Using the high-performance UVES spectrometer on the 8.2-m Kuyen telescope of ESO's Very Large Telescope at the Paranal Observatory (Chile) which is particularly sensitive to ultraviolet light, a team of ESO and Italian astronomers [1] succeeded in obtaining the first reliable measurements of the Beryllium content in two TO-stars (denoted "A0228" and "A2111") in the globular cluster NGC 6397 (PR Photo 23b/04). Located at a distance of about 7,200 light-years in the direction of a rich stellar field in the southern constellation Ara, it is one of the two nearest stellar clusters of this type; the other is Messier 4. The observations were done during several nights in the course of 2003. Totalling more than 10 hours of exposure on each of the 16th-magnitude stars, they pushed the VLT and UVES towards the technical limit. Reflecting on the technological progress, the leader of the team, ESO-astronomer Luca Pasquini, is elated: "Just a few years ago, any observation like this would have been impossible and just remained an astronomer's dream!" The resulting spectra (PR Photo 23c/04) of the faint stars show the weak signatures of Beryllium ions (Be II). Comparing the observed spectrum with a series of synthetic spectra with different Beryllium content (in astrophysics: "abundance") allowed the astronomers to find the best fit and thus to measure the very small amount of Beryllium in these stars: for each Beryllium atom there are about 2,224,000,000,000 hydrogen atoms. Beryllium lines are also seen in another star of the same type as these stars, HD 218052, cf. PR Photo 23c/04. However, it is not a member of a cluster and its age is by far not as well known as that of the cluster stars. Its Beryllium content is quite similar to that of the cluster stars, indicating that this field star was born at about the same time as the cluster. From the Big Bang until now According to the best current spallation theories, the measured amount of Beryllium must have accumulated in the course of 200 - 300 million years. Italian astronomer Daniele Galli, another member of the team, does the calculation: "So now we know that the age of the Milky Way is this much more than the age of that globular cluster - our galaxy must therefore be 13,600 ± 800 million years old. This is the first time we have obtained an independent determination of this fundamental value!". Within the given uncertainties, this number also fits very well with the current estimate of the age of the Universe, 13,700 million years, that is the time elapsed since the Big Bang. It thus appears that the first generation of stars in the Milky Way galaxy was formed at about the time the "Dark Ages" ended, now believed to be some 200 million years after the Big Bang. It would seem that the system in which we live may indeed be one of the "founding" members of the galaxy population in the Universe. More information The research presented in this press release is discussed in a paper entitled "Be in turn-off stars of NGC 6397: early Galaxy spallation, cosmochronology and cluster formation" by L. Pasquini and co-authors that will be published in the European research journal "Astronomy & Astrophysics" (astro-ph/0407524). Notes [1] The team is composed of Luca Pasquini (ESO), Piercarlo Bonifacio (INAF-Osservatorio di Trieste, Italy), Sofia Randich and Daniele Galli (INAF-Osservatorio di Arcetri, Firenze, Italy), and Raffaele G. Gratton (INAF-Osservatorio di Padova, Italy). [2] Interestingly, the secondary mirrors of the four VLT Unit Telescopes are made of Beryllium in order to make them as light as possible while retaining the necessary stiffness. Each of the four mirrors measures 1.1 metres across and weighs about 50 kilograms.

A Unified Steganalysis Framework

DTIC Science & Technology

2013-04-01

contains more than 1800 images of different scenes. In the experiments, we used four JPEG based steganography techniques: Out- guess [13], F5 [16], model...also compressed these images again since some of the steganography meth- ods are double compressing the images . Stego- images are generated by embedding...randomly chosen messages (in bits) into 1600 grayscale images using each of the four steganography techniques. A random message length was determined

Confidential storage and transmission of medical image data.

PubMed

Norcen, R; Podesser, M; Pommer, A; Schmidt, H-P; Uhl, A

2003-05-01

We discuss computationally efficient techniques for confidential storage and transmission of medical image data. Two types of partial encryption techniques based on AES are proposed. The first encrypts a subset of bitplanes of plain image data whereas the second encrypts parts of the JPEG2000 bitstream. We find that encrypting between 20% and 50% of the visual data is sufficient to provide high confidentiality.

Basic Investigation on Medical Ultrasonic Echo Image Compression by JPEG2000 - Availability of Wavelet Transform and ROI Method

DTIC Science & Technology

2001-10-25

Table III. In spite of the same quality in ROI, it is decided that the images in the cases where QF is 1.3, 1.5 or 2.0 are not good for diagnosis. Of...but (b) is not good for diagnosis by decision of ultrasonographer. Results reveal that wavelet transform achieves higher quality of image compared

Air Force Institute of Technology Research Report 2008

DTIC Science & Technology

2009-05-01

Chapter) Instructor of the Year, March 2008. PETERSON , GILBERT L. Air Force Junior Scientist of the Year, September 2008. RAINES, RICHARD A...DIRECTORATE RODRIGUEZ, BENJAMIN M., II, JPEG Steganography Embedding Methods. AFIT/DEE/ENG/08-20. Faculty Advisor: Dr. Gilbert L. Peterson . Sponsor...Faculty Advisor: Dr. Gilbert L. Peterson . Sponsor: AFRL/RY. GIRARD, JASON A., Material Perturbations to Enhance Performance of the Theile Half-Width

Multiple Eyes for the VLT

NASA Astrophysics Data System (ADS)

2002-01-01

First System of Deployable Multi-Integral Field Units Ready Summary The ESO Very Large Telescope (VLT) at the Paranal Observatory is being equipped with many state-of-the-art astronomical instruments that will allow observations in a large number of different modes and wavebands. Soon to come is the Fibre Large Array Multi-Element Spectrograph (FLAMES) , a project co-ordinated by ESO. It incorporates several complex components, now being constructed at various research institutions in Europe and Australia. One of these, a true technological feat, is a unique system of 15 deployable fibre bundles, the so-called Integral Field Units (IFUs) . They can be accurately positioned within a sky field-of-view measuring no less that 25 arcmin in diameter, i.e., almost as large as the full Moon . Each of the IFUs looks like an insect's eye and images a small sky area (3 x 2 arcsec 2 ) with a multiple microlens. From each IFU, 20 narrow light beams are sent via optical fibres to an advanced spectrograph. All 300 spectra are recorded simultaneously by a sensitive digital camera. A major advantage of this technique is that, contrary usual spectroscopic observations in which spectral information is obtained along a (one-dimensional) line on the sky, it now allows (two-dimensional) area spectroscopy . This will permit extremely efficient spectral observations of many celestial objects, including faint galaxies, providing detailed information about their internal structure and motions. Such studies will have an important impact on our understanding, e.g., of the early evolution of galaxies , the main building blocks in the Universe. The IFUs have been developed by a team of astronomers and engineers [2] at the Observatoire de Paris-Meudon. All IFU components are now at the ESO Headquarters in Garching (Germany) where they are being checked and integrated into the instrument [3]. PR Photo 03a/02 : The GIRAFFE spectrograph in the ESO Assembly Hall (Garching, Germany) . PR Photo 03b/02 : Example of a future IFU observation in a sky field with galaxies. PR Photo 03c/02 : An illustration of how the IFUs function . PR Photo 03d/02 : The IFU design . PR Photo 03e/02 : Computer simulation of the motions in a galaxy , as deduced from IFU observations. The FLAMES instrument and its many parts ESO PR Photo 03a/02 ESO PR Photo 03a/02 [Preview - JPEG: 560 x 400 pix - 62k] [Normal - JPEG: 1120 x 800 pix - 544k] [Hi-Res - JPEG: 2885 x 2061 pix - 5.3M] Caption : PR Photo 03a/02 : The GIRAFFE spectrograph, a major component of the VLT Fibre Large Array Multi-Element Spectrograph (FLAMES) , during the present assembly at the ESO Headquarters in Garching (Germany). Late last year, the ESO Very Large Telescope (VLT) at the Paranal Observatory received its newest instrument, NAOS-CONICA . The first tests were very successful, cf. PR 25/01. But this is far from the last. Work is now underway at several European and overseas research institutes to complete the many other large astronomical instruments planned for the VLT. Over the next years, these new facilities will enter into operation one by one, further enhancing the capabilities of this true flagship of European science. One of these instruments is the Fibre Large Array Multi-Element Spectrograph (FLAMES) , to be installed at the 8.2-m VLT KUEYEN Unit Telescope. It will be able to observe the spectra of a large number of individual, faint objects (or small sky areas) simultaneously and incorporates several highly complex components, e.g., * a Nasmyth Corrector - an optical system to focus the light that is received from the telescope over a sky field of no less than 25 arcmin in diameter, i.e., almost as large as the full Moon . It was installed on KUEYEN in September 2001 * a Fibre Positioner (known as "OzPoz"). It is now being built by the AUSTRALIS Consortium, lead by the Anglo Australian Observatory (AAO) , cf. ESO PR 07/98 * a high- and intermediate-resolution optical spectrograph, GIRAFFE , with its own fibre system, developed by the Observatoire de Paris-Meudon in close collaboration with ESO . It is now in the process of being assembled in the ESO laboratories in Garching, cf. PR Photo 03a/01 . Work at the FLAMES facility will be supported by specialized data reduction software developed by Observatoire de Genève-Lausanne in collaboration with Observatoire de Paris-Meudon , and specialized observing software developed at ESO . There will also be a fibre link to the UVES high-dispersion spectrograph and there are plans for incorporating an intermediate resolution IR spectrograph in the future; the ITAL-FLAMES consortium is now preparing the associated instrument control and data reduction software packages. The Integral Field Units (IFUs) for FLAMES ESO PR Photo 03b/02 ESO PR Photo 03b/02 [Preview - JPEG: 573 x 400 pix - 94k] [Normal - JPEG: 1145 x 800 pix - 592k] ESO PR Photo 03c/02 ESO PR Photo 03c/02 [Preview - JPEG: 538 x 400 pix - 63k] [Normal - JPEG: 1076 x 800 pix - 256k] Caption : PR Photo 03b/02 : An example of observations with Integral Field Units (IFUs) at FLAMES (only 4 of the 15 units are shown here). Each IFU is placed so that it records the light from 20 small adjacent sky areas (each measuring about 3 x 2 arcsec 2 ). In this way, it is possible to register simultaneously the spectrum of as many different regions of a (distant) galaxy. PR Photo 03c/02 : How the IFUs work: each IFU consists of a microlens that guides the light from a small sky area, normally centred on a celestial object (e.g., a distant galaxy) and sends it on to the entry of the spectrograph (inside the dotted box). When it enters into operation later this year [3], GIRAFFE will become the most efficient instrument of its kind available at the world's large optical/infrared telescopes. It will be especially suited for the study of the dynamical properties of distant galaxies - their motion in space, as well as the internal motions of their stars and gas clouds. Indeed, observations of the velocity fields in a large variety of galaxies in the early Universe (when its age was only one third to one half of its current age) will be essential for a better understanding of those major building blocks of the Universe. This is first of all due to the unique system of 15 deployable fibre bundles, the Integral Field Units (IFUs) , that can be accurately positioned within a field-of-view measuring no less than 25 arcmin across, cf. PR Photo 03b/02 . Each IFU is a microscopic, state-of-the-art two-dimensional lens array with an aperture of 3 x 2 arcsec 2 on the sky. It contains twenty micro-lenses coupled with optical fibres leading the light recorded at each point in the field to the entry slit of the spectrograph, cf. PR Photo 03c/02 . A great advantage of this technique is that, contrary to usual spectroscopic observations in which spectral information is obtained along a (one-dimensional) line on the sky, it now allows (two-dimensional) area spectroscopy . It is therefore possible to obtain spectra of larger areas of a celestial object simultaneously, and not just along one particular diameter. With 15 IFUs at their disposal, the astronomers will be able to observe many galaxies at the same time - this will represent a tremendous gain of efficiency with many more astrophysical data collected within the available observation time! The IFU design ESO PR Photo 03d/02 ESO PR Photo 03d/02 [Preview - JPEG: 400 x 469 pix - 86k] [Normal - JPEG: 800 x 937 pix - 232k] Caption : PR Photo 03d/02 : Mechanical design of an IFU "button". Upper right: photo of an "IFU entrance" with the 20 square microlenses, each measuring 1.8 x 1.8 mm 2. PR Photo 03d/02 shows the mechanical design of the entrance of one IFU. An array of 20 square microlenses, each measuring 1.8 x 1.8 mm 2 is used to concentrate the light in the corresponding, small sky field onto a prism that passes the light on to 20 fibres. These are inserted and cemented into a mechanical holder and the entire assembly is then mounted in an IFU "button" that will be positioned in the focal plane by the OzPoz Positioner. A magnet is incorporated at the base of the button to ensure a stable position (a firm hold) on the focal plate during the observation. The optical cementing is ensured with an UV curing and the fibre bundle is cemented into the button with an epoxy glue in order to ensure excellent stiffness of the complete assembly. The external diameter of the button is about 6 mm, corresponding to about 11 arcsec on the sky, allowing quite close positioning of the buttons on the focal plate. An example of astronomical observations with IFUs ESO PR Photo 03e/02 ESO PR Photo 03e/02 [Preview - JPEG: 467 x 400 pix - 51k] [Normal - JPEG: 933 x 800 pix - 264k] Caption : PR Photo 03e/02 is a computer simulation of the velocity field in a galaxy , as deduced on the basis of IFU spectra. The blue area has negative velocities and is thus the approaching side of the galaxy, while the red area is receding. In this way, the direction of rotation can be determined. The velocity unit is km/s. During the astronomical observation with the IFUs , the spectrograph slit receives light from 15 sky areas simultaneously, each with 21 fibres (20 from the IFU and 1 that collects the light from the night sky in an adjacent sky field) or 22 fibres (with the addition of 1 fibre with light from a calibration lamp). Altogether, about 300 spectra are recorded simultaneously. By means of such observations, the astronomers can perform many different studies, e.g., of the dynamics of star clusters and motions of stars and interstellar clouds in galaxies. PR Photo 03e/02 provides an example of a computer simulation of a resulting diagramme in which the internal rotation of a distant spiral galaxy is clearly visible. Red and yellow areas have positive velocities that are approaching while the blue areas are receding). Of special interest will be the study of the often violent motions when two or more galaxies interact gravitationally. Notes [1]: This is a joint Press Release of ESO and the Observatoire de Paris (cf. http://www.obspm.fr/actual/nouvelle/jan02/flames.shtml ). [2]:The GIRAFFE team at the Observatoire de Paris that has developed the Integral Field Units (IFUs) discussed in this Press Release includes Jean-Pierre Aoustin, Sebastien Baratchart, Patrice Barroso, Veronique Cayatte, Laurent Chemin, Florence Cornu, Jean Cretenet, Jean-Paul Danton, Hector Flores, Francoise Gex, Fabien Guillon, Isabelle Guinouard, Francois Hammer, Jacques Hammes, David Horville, Jean-Michel Huet, Laurent Jocou, Pierre Kerlirzin, Serge Lebourg, Hugo Lenoir, Claude Lesqueren, Regis Marichal, Michel Marteaud, Thierry Melse, Fabrice Peltier, Francois Rigaud, Frederic Sayede and Pascal Vola . [3]: It is expected to ship the various components of the FLAMES instrument to the VLT Observatory at Paranal (Chile) during the next month. "First Light" is scheduled to take place some weeks thereafter, following installation at the telescope and extensive system tests. ESO will issue another Press Release with more details on that occasion.

A COLLISION IN THE HEART OF A GALAXY

NASA Technical Reports Server (NTRS)

2002-01-01

The Hubble Space Telescope's Near Infrared Camera and Multi-Object Spectrometer (NICMOS) has uncovered a collision between two spiral galaxies in the heart of the peculiar galaxy called Arp 220. The collision has provided the spark for a burst of star formation. The NICMOS image captures bright knots of stars forming in the heart of Arp 220. The bright, crescent moon-shaped object is a remnant core of one of the colliding galaxies. The core is a cluster of 1 billion stars. The core's half-moon shape suggests that its bottom half is obscured by a disk of dust about 300 light-years across. This disk is embedded in the core and may be swirling around a black hole. The core of the other colliding galaxy is the bright round object to the left of the crescent moon-shaped object. Both cores are about 1,200 light-years apart and are orbiting each other. Arp 220, located 250 million light-years away in the constellation Serpens, is the 220th object in Halton Arp's Atlas of Peculiar Galaxies. The image was taken with three filters. The colors have been adjusted so that, in this infrared image, blue corresponds to shorter wavelengths, red to longer wavelengths. The image was taken April 5, 1997. Credits: Rodger Thompson, Marcia Rieke, Glenn Schneider (University of Arizona) and Nick Scoville (California Institute of Technology), and NASA Image files in GIF and JPEG format and captions may be accessed on the Internet via anonymous ftp from ftp.stsci.edu in /pubinfo.

Ultrasonic Nondestructive Evaluation Techniques Applied to the Quantitative Characterization of Textile Composite Materials

NASA Technical Reports Server (NTRS)

Miller, James G.

1997-01-01

In this Progress Report, we describe our further development of advanced ultrasonic nondestructive evaluation methods applied to the characterization of anisotropic materials. We present images obtained from experimental measurements of ultrasonic diffraction patterns transmitted through water only and transmitted through water and a thin woven composite. All images of diffraction patterns have been included on the accompanying CD-ROM in the JPEG format and Adobe TM Portable Document Format (PDF), in addition to the inclusion of hardcopies of the images contained in this report. In our previous semi-annual Progress Report (NAG 1-1848, December, 1996), we proposed a simple model to simulate the effect of a thin woven composite on an insonifying ultrasonic pressure field. This initial approach provided an avenue to begin development of a robust measurement method for nondestructive evaluation of anisotropic materials. In this Progress Report, we extend that work by performing experimental measurements on a single layer of a five-harness biaxial woven composite to investigate how a thin, yet architecturally complex, material interacts with the insonifying ultrasonic field. In Section 2 of this Progress Report we describe the experimental arrangement and methods for data acquisition of the ultrasonic diffraction patterns upon transmission through a thin woven composite. We also briefly describe the thin composite specimen investigated. Section 3 details the analysis of the experimental data followed by the experimental results in Section 4. Finally, a discussion of the observations and conclusions is found in Section 5.

OXYGEN-RICH SUPERNOVA REMNANT IN THE LARGE MAGELLANIC CLOUD

NASA Technical Reports Server (NTRS)

2002-01-01

This is a NASA Hubble Space Telescope image of the tattered debris of a star that exploded 3,000 years ago as a supernova. This supernova remnant, called N132D, lies 169,000 light-years away in the satellite galaxy, the Large Magellanic Cloud. A Hubble Wide Field Planetary Camera 2 image of the inner regions of the supernova remnant shows the complex collisions that take place as fast moving ejecta slam into cool, dense interstellar clouds. This level of detail in the expanding filaments could only be seen previously in much closer supernova remnants. Now, Hubble's capabilities extend the detailed study of supernovae out to the distance of a neighboring galaxy. Material thrown out from the interior of the exploded star at velocities of more than four million miles per hour (2,000 kilometers per second) plows into neighboring clouds to create luminescent shock fronts. The blue-green filaments in the image correspond to oxygen-rich gas ejected from the core of the star. The oxygen-rich filaments glow as they pass through a network of shock fronts reflected off dense interstellar clouds that surrounded the exploded star. These dense clouds, which appear as reddish filaments, also glow as the shock wave from the supernova crushes and heats the clouds. Supernova remnants provide a rare opportunity to observe directly the interiors of stars far more massive than our Sun. The precursor star to this remnant, which was located slightly below and left of center in the image, is estimated to have been 25 times the mass of our Sun. These stars 'cook' heavier elements through nuclear fusion, including oxygen, nitrogen, carbon, iron etc., and the titanic supernova explosions scatter this material back into space where it is used to create new generations of stars. This is the mechanism by which the gas and dust that formed our solar system became enriched with the elements that sustain life on this planet. Hubble spectroscopic observations will be used to determine the exact chemical composition of this nuclear- processed material, and thereby test theories of stellar evolution. The image shows a region of the remnant 50 light-years across. The supernova explosion should have been visible from Earth's southern hemisphere around 1,000 B.C., but there are no known historical records that chronicle what would have appeared as a 'new star' in the heavens. This 'true color' picture was made by superposing images taken on 9-10 August 1994 in three of the strongest optical emission lines: singly ionized sulfur (red), doubly ionized oxygen (green), and singly ionized oxygen (blue). Photo credit: Jon A. Morse (STScI) and NASA Investigating team: William P. Blair (PI; JHU), Michael A. Dopita (MSSSO), Robert P. Kirshner (Harvard), Knox S. Long (STScI), Jon A. Morse (STScI), John C. Raymond (SAO), Ralph S. Sutherland (UC-Boulder), and P. Frank Winkler (Middlebury). Image files in GIF and JPEG format may be accessed via anonymous ftp from oposite.stsci.edu in /pubinfo: GIF: /pubinfo/GIF/N132D.GIF JPEG: /pubinfo/JPEG/N132D.jpg The same images are available via World Wide Web from links in URL http://www.stsci.edu/public.html.

Transcontinental communication and quantitative digital histopathology via the Internet; with special reference to prostate neoplasia

PubMed Central

Montironi, R; Thompson, D; Scarpelli, M; Bartels, H G; Hamilton, P W; Da Silva, V D; Sakr, W A; Weyn, B; Van Daele, A; Bartels, P H

2002-01-01

Objective: To describe practical experiences in the sharing of very large digital data bases of histopathological imagery via the Internet, by investigators working in Europe, North America, and South America. Materials: Experiences derived from medium power (sampling density 2.4 pixels/μm) and high power (6 pixels/μm) imagery of prostatic tissues, skin shave biopsies, breast lesions, endometrial sections, and colonic lesions. Most of the data included in this paper were from prostate. In particular, 1168 histological images of normal prostate, high grade prostatic intraepithelial neoplasia (PIN), and prostate cancer (PCa) were recorded, archived in an image format developed at the Optical Sciences Center (OSC), University of Arizona, and transmitted to Ancona, Italy, as JPEG (joint photographic experts group) files. Images were downloaded for review using the Internet application FTP (file transfer protocol). The images were then sent from Ancona to other laboratories for additional histopathological review and quantitative analyses. They were viewed using Adobe Photoshop, Paint Shop Pro, and Imaging for Windows. For karyometric analysis full resolution imagery was used, whereas histometric analyses were carried out on JPEG imagery also. Results: The three applications of the telecommunication system were remote histopathological assessment, remote data acquisition, and selection of material. Typical data volumes for each project ranged from 120 megabytes to one gigabyte, and transmission times were usually less than one hour. There were only negligible transmission errors, and no problem in efficient communication, although real time communication was an exception, because of the time zone differences. As far as the remote histopathological assessment of the prostate was concerned, agreement between the pathologist's electronic diagnosis and the diagnostic label applied to the images by the recording scientist was present in 96.6% of instances. When these images were forwarded to two pathologists, the level of concordance with the reviewing pathologist who originally downloaded the files from Tucson was as high as 97.2% and 98.0%. Initial results of studies made by researchers belonging to our group but located in others laboratories showed the feasibility of making quantitative analysis on the same images. Conclusions: These experiences show that diagnostic teleconsultation and quantitative image analyses via the Internet are not only feasible, but practical, and allow a close collaboration between researchers widely separated by geographical distance and analytical resources. PMID:12037030

Cartographic Production for the FLaSH Map Study: Generation of Rugosity Grids, 2008

USGS Publications Warehouse

Robbins, Lisa L.; Knorr, Paul O.; Hansen, Mark

2010-01-01

Project Summary This series of raster data is a U.S. Geological Survey (USGS) Data Series release from the Florida Shelf Habitat Project (FLaSH). This disc contains two raster images in Environmental Systems Research Institute, Inc. (ESRI) raster grid format, jpeg image format, and Geo-referenced Tagged Image File Format (GeoTIFF). Data is also provided in non-image ASCII format. Rugosity grids at two resolutions (250 m and 1000 m) were generated for West Florida shelf waters to 250 m using a custom algorithm that follows the methods of Valentine and others (2004). The Methods portion of this document describes the specific steps used to generate the raster images. Rugosity, also referred to as roughness, ruggedness, or the surface-area ratio (Riley and others, 1999; Wilson and others, 2007), is a visual and quantitative measurement of terrain complexity, a common variable in ecological habitat studies. The rugosity of an area can affect biota by influencing habitat, providing shelter from elements, determining the quantity and type of living space, influencing the type and quantity of flora, affecting predator-prey relationships by providing cover and concealment, and, as an expression of vertical relief, can influence local environmental conditions such as temperature and moisture. In the marine environment rugosity can furthermore influence current flow rate and direction, increase the residence time of water in an area through eddying and current deflection, influence local water conditions such as chemistry, turbidity, and temperature, and influence the rate and nature of sedimentary deposition. State-of-the-art computer-mapping techniques and data-processing tools were used to develop shelf-wide raster and vector data layers. Florida Shelf Habitat (FLaSH) Mapping Project (http://coastal.er.usgs.gov/flash) endeavors to locate available data, identify data gaps, synthesize existing information, and expand our understanding of geologic processes in our dynamic coastal and marine systems.

Map_plot and bgg_plot: software for integration of geoscience datasets

NASA Astrophysics Data System (ADS)

Gaillot, Philippe; Punongbayan, Jane T.; Rea, Brice

2004-02-01

Since 1985, the Ocean Drilling Program (ODP) has been supporting multidisciplinary research in exploring the structure and history of Earth beneath the oceans. After more than 200 Legs, complementary datasets covering different geological environments, periods and space scales have been obtained and distributed world-wide using the ODP-Janus and Lamont Doherty Earth Observatory-Borehole Research Group (LDEO-BRG) database servers. In Earth Sciences, more than in any other science, the ensemble of these data is characterized by heterogeneous formats and graphical representation modes. In order to fully and quickly assess this information, a set of Unix/Linux and Generic Mapping Tool-based C programs has been designed to convert and integrate datasets acquired during the present ODP and the future Integrated ODP (IODP) Legs. Using ODP Leg 199 datasets, we show examples of the capabilities of the proposed programs. The program map_plot is used to easily display datasets onto 2-D maps. The program bgg_plot (borehole geology and geophysics plot) displays data with respect to depth and/or time. The latter program includes depth shifting, filtering and plotting of core summary information, continuous and discrete-sample core measurements (e.g. physical properties, geochemistry, etc.), in situ continuous logs, magneto- and bio-stratigraphies, specific sedimentological analyses (lithology, grain size, texture, porosity, etc.), as well as core and borehole wall images. Outputs from both programs are initially produced in PostScript format that can be easily converted to Portable Document Format (PDF) or standard image formats (GIF, JPEG, etc.) using widely distributed conversion programs. Based on command line operations and customization of parameter files, these programs can be included in other shell- or database-scripts, automating plotting procedures of data requests. As an open source software, these programs can be customized and interfaced to fulfill any specific plotting need of geoscientists using ODP-like datasets.

Southern Fireworks above ESO Telescopes

NASA Astrophysics Data System (ADS)

1999-05-01

New Insights from Observations of Mysterious Gamma-Ray Burst International teams of astronomers are now busy working on new and exciting data obtained during the last week with telescopes at the European Southern Observatory (ESO). Their object of study is the remnant of a mysterious cosmic explosion far out in space, first detected as a gigantic outburst of gamma rays on May 10. Gamma-Ray Bursters (GRBs) are brief flashes of very energetic radiation - they represent by far the most powerful type of explosion known in the Universe and their afterglow in optical light can be 10 million times brighter than the brightest supernovae [1]. The May 10 event ranks among the brightest one hundred of the over 2500 GRB's detected in the last decade. The new observations include detailed images and spectra from the VLT 8.2-m ANTU (UT1) telescope at Paranal, obtained at short notice during a special Target of Opportunity programme. This happened just over one month after that powerful telescope entered into regular service and demonstrates its great potential for exciting science. In particular, in an observational first, the VLT measured linear polarization of the light from the optical counterpart, indicating for the first time that synchrotron radiation is involved . It also determined a staggering distance of more than 7,000 million light-years to this GRB . The astronomers are optimistic that the extensive observations will help them to better understand the true nature of such a dramatic event and thus to bring them nearer to the solution of one of the greatest riddles of modern astrophysics. A prime example of international collaboration The present story is about important new results at the front-line of current research. At the same time, it is also a fine illustration of a successful collaboration among several international teams of astronomers and the very effective way modern science functions. It began on May 10, at 08:49 hrs Universal Time (UT), when the Burst And Transient Source Experiment (BATSE) onboard NASA's Compton Gamma-Ray Observatory (CGRO) high in orbit around the Earth, suddenly registered an intense burst of gamma-ray radiation from a direction less than 10° from the celestial south pole. Independently, the Gamma-Ray Burst Monitor (GRBM) on board the Italian-Dutch BeppoSAX satellite also detected the event (see GCN GRB Observation Report 304 [2]). Following the BATSE alert, the BeppoSAX Wide-Field Cameras (WFC) quickly localized the sky position of the burst within a circle of 3 arcmin radius in the southern constellation Chamaeleon. It was also detected by other satellites, including the ESA/NASA Ulysses spacecraft , since some years in a wide orbit around the Sun. The event was designated GRB 990510 and the measured position was immediately distributed by BeppoSAX Mission Scientist Luigi Piro to a network of astronomers. It was also published on Circular No. 7160 of the International Astronomical Union (IAU). From Amsterdam (The Netherlands), Paul Vreeswijk, Titus Galama , and Evert Rol of the Amsterdam/Huntsville GRB follow-up team (led by Jan van Paradijs ) immediately contacted astronomers at the 1-meter telescope of the South African Astronomical Observatory (SAAO) (Sutherland, South Africa) of the PLANET network microlensing team, an international network led by Penny Sackett in Groningen (The Netherlands). There, John Menzies of SAAO and Karen Pollard (University of Canterbury, New Zealand) were about to begin the last of their 14 nights of observations, part of a continuous world-wide monitoring program looking for evidence of planets around other stars. Other PLANET sites in Australia and Tasmania where it was still nighttime were unfortunately clouded out (some observations were in fact made that night at the Mount Stromlo observatory in Australia, but they were only announced one day later). As soon as possible - immediately after sundown and less than 9 hours after the initial burst was recorded - the PLANET observers turned their telescope and quickly obtained a series of CCD images in visual light of the sky region where the gamma-ray burst was detected, then shipped them off electronically to their Dutch colleagues [3]. Comparing the new photos with earlier ones in the digital sky archive, Vreeswijk, Galama and Rol almost immediately discovered a new, relatively bright visual source in the region of the gamma-ray burst, which they proposed as the optical counterpart of the burst, cf. their dedicated webpage at http://www.astro.uva.nl/~titus/grb990510/. The team then placed a message on the international Gamma-Ray Burster web-noteboard ( GCN Circular 310), thereby alerting their colleagues all over the world. One hour later, the narrow-field instruments on BeppoSax identified a new X-Ray source at the same location ( GCN Circular 311), thus confirming the optical identification. All in all, a remarkable synergy of human and satellite resources! Observations of GRB 990510 at ESO Vreeswijk, Galama and Rol, in collaboration with Nicola Masetti, Eliana Palazzi and Elena Pian of the BeppoSAX GRB optical follow-up team (led by Filippo Frontera ) and the Huntsville optical follow-up team (led by Chryssa Kouveliotou ), also contacted the European Southern Observatory (ESO). Astronomers at this Organization's observatories in Chile were quick to exploit this opportunity and crucial data were soon obtained with several of the main telescopes at La Silla and Paranal, less than 14 hours after the first detection of this event by the satellite. ESO PR Photo 22a/99 ESO PR Photo 22a/99 [Preview - JPEG: 211 x 400 pix - 72k] [Normal - JPEG: 422 x 800 pix - 212k] [High-Res - JPEG: 1582 x 3000 pix - 2.6M] ESO PR Photo 22b/99 ESO PR Photo 22b/99 [Preview - JPEG: 400 x 437 pix - 297k] [Normal - JPEG: 800 x 873 pix - 1.1M] [High-Res - JPEG: 2300 x 2509 pix - 5.9M] Caption to PR Photo 22a/99 : This wide-field photo was obtained with the Wide-Field Imager (WFI) at the MPG/ESO 2.2-m telescope at La Silla on May 11, 1999, at 08:42 UT, under inferior observing conditions (seeing = 1.9 arcsec). The exposure time was 450 sec in a B(lue) filter. The optical image of the afterglow of GRB 990510 is indicated with an arrow in the upper part of the field that measures about 8 x 16 arcmin 2. The original scale is 0.24 pix/arcsec and there are 2k x 4k pixels in the original frame. North is up and East is left. Caption to PR Photo 22b/99 : This is a (false-)colour composite of the area around the optical image of the afterglow of GRB 990510, based on three near-infrared exposures with the SOFI multi-mode instrument at the 3.6-m ESO New Technology Telescope (NTT) at La Silla, obtained on May 10, 1999, between 23:15 and 23:45 UT. The exposure times were 10 min each in the J- (1.2 µm; here rendered in blue), H- (1.6 µm; green) and K-bands (2.2 µm; red); the image quality is excellent (0.6 arcsec). The field measures about 5 x 5 arcmin 2 ; the original pixel size is 0.29 arcsec. North is up and East is left. ESO PR Photo 22c/99 ESO PR Photo 22c/99 [Preview - JPEG: 400 x 235 pix - 81k] [Normal - JPEG: 800 x 469 pix - 244k] [High-Res - JPEG: 2732 x 1603 pix - 2.6M] ESO PR Photo 22d/99 ESO PR Photo 22d/99 [Preview - JPEG: 400 x 441 pix - 154k] [Normal - JPEG: 800 x 887 pix - 561k] [High-Res - JPEG: 2300 x 2537 pix - 2.3M] Caption to PR Photo 22c/99 : To the left is a reproduction of a short (30 sec) centering exposure in the V-band (green-yellow light), obtained with VLT ANTU and the multi-mode FORS1 instrument on May 11, 1999, at 03:48 UT under mediocre observing conditions (image quality 1.0 arcsec).The optical image of the afterglow of GRB 990510 is easily seen in the box, by comparison with an exposure of the same sky field before the explosion, made with the ESO Schmidt Telescope in 1986 (right).The exposure time was 120 min on IIIa-F emulsion behind a R(ed) filter. The field shown measures about 6.2 x 6.2 arcmin 2. North is up and East is left. Caption to PR Photo 22d/99 : Enlargement from the 30 sec V-exposure by the VLT, shown in Photo 22c/99. The field is about 1.9 x 1.9 arcmin 2. North is up and East is left. The data from Chile were sent to Europe where, by quick comparison of images from the Wide-Field Imager (WFI) at the MPG/ESO 2.2-m telescope at La Silla with those from SAAO, the Dutch and Italian astronomers found that the brightness of the suspected optical counterpart was fading rapidly; this was a clear sign that the identification was correct ( GCN Circular 313). With the precise sky position of GRB 990510 now available, the ESO observers at the VLT were informed and, setting other programmes aside under the Target of Opportunity scheme, were then able to obtain polarimetric data as well as a very detailed spectrum of the optical counterpart. Comprehensive early observations of this object were also made at La Silla with the ESO 3.6-m telescope (CCD images in the UBVRI-bands from the ultraviolet to the near-infrared part of the spectrum) and the ESO 3.6-m New Technology Telescope (with the SOFI multimode instrument in the infrared JHK-bands). A series of optical images in the BVRI-bands was secured with the Danish 1.5-m telescope, documenting the rapid fading of the object. Observations at longer wavelengths were made with the 15-m Swedish-ESO Submillimetre Telescope (SEST). All of the involved astronomers concur that a fantastic amount of observations has been obtained. They are still busy analyzing the data, and are confident that much will be learned from this particular burst. The VLT scores a first: Measurement of GRB polarization ESO PR Photo 22e/99 ESO PR Photo 22e/99 [Preview - JPEG: 400 x 434 pix - 92k] [Normal - JPEG: 800 x 867 pix - 228k] Caption to PR Photo 22e/99 : Preliminary polarization measurement of the optical image of the afterglow of GRB 990510, as observed with the VLT 8.2-m ANTU telescope and the multi-mode FORS1 instrument. The abscissa represents the measurement angle; the ordinate the corresponding intensity. The sinusoidal curve shows the best fit to the data points (with error bars); the resulting degree of polarization is 1.7 ± 0.2 percent. A group of Italian astronomers led by Stefano Covino of the Observatory of Brera in Milan, have observed for the first time polarization (some degree of alignment of the electric fields of emitted photons) from the optical afterglow of a gamma-ray burst, see their dedicated webpage at http://www.merate.mi.astro.it/~lazzati/GRB990510/. This yielded a polarization at a level of 1.7 ± 0.2 percent for the optical afterglow of GRB 990510, some 18 hours after the gamma-ray burst event; the magnitude was R = 19.1 at the time of this VLT observation. Independently, the Dutch astronomers Vreeswijk, Galama and Rol measured polarization of the order of 2 percent with another data set from the VLT ANTU and FORS1 obtained during the same night. This important result was made possible by the very large light-gathering power of the 8.2-m VLT-ANTU mirror and the FORS1 imaging polarimeter. Albeit small, the detected degree of polarization is highly significant; it is also one of the most precise measurements of polarization ever made in an object as faint as this one. Most importantly, it provides the strongest evidence to date that the afterglow radiation of gamma-ray bursts is, at least in part, produced by the synchrotron process , i.e. by relativistic electrons spiralling in a magnetized region. This type of process is able to imprint some linear polarization on the produced radiation, if the magnetic field is not completely chaotic. The spectrum ESO PR Photo 22f/99 ESO PR Photo 22f/99 [Preview - JPEG: 400 x 485 pix - 112k] [Normal - JPEG: 800 x 969 pix - 288k] Caption to PR Photo 22f/99 : A spectrum of the afterglow of GRB 990510, obtained with VLT ANTU and the multi-mode FORS1 instrument during the night of May 10-11, 1999. Some of the redshifted absorption lines are identified and the stronger bands from the terrestrial atmosphere are also indicated. A VLT spectrum with the multi-mode FORS1 instrument was obtained a little later and showed a number of absorption lines , e.g. from ionized Aluminium, Chromium and neutral Magnesium. They do not arise in the optical counterpart itself - the gas there is so hot and turbulent that any spectral lines will be extremely broad and hence extremely difficult to identify - but from interstellar gas in a galaxy 'hosting' the GRB source, or from intergalactic clouds along the line of sight. It is possible to measure the distance to this intervening material from the redshift of the lines; astronomers Vreeswijk, Galama and Rol found z = 1.619 ± 0.002 [4]. This allows to establish a lower limit for the distance of the explosion and also its total power. The numbers turn out to be truly enormous. The burst occurred at an epoch corresponding to about one half of the present age of the Universe (at a distance of about 7,000 million light-years [5]), and the total energy of the explosion in gamma-rays must be higher than 1.4 10 53 erg , assuming a spherical emission. This energy corresponds to the entire optical energy emitted by the Milky Way in more than 30 years; yet the gamma-ray burst took less than 100 seconds. Since the optical afterglows of gamma-ray bursts are faint, and their flux decays quite rapidly in time, the combination of large telescopes and fast response through suitable observing programs are crucial and, as demonstrated here, ESO's VLT is ideally suited to this goal! The lightcurve Combining results from a multitude of telescopes has provided most useful information. Interestingly, a "break" was observed in the light curve (the way the light of the optical counterpart fades) of the afterglow. Some 1.5 - 2 days after the explosion, the brightness began to decrease more rapidly; this is well documented with the CCD images from the Danish 1.5-m telescope at La Silla and the corresponding diagrams are available on a dedicated webpage at http://www.astro.ku.dk/~jens/grb990510/ at the Copenhagen University Observatory. Complete, regularly updated lightcurves with all published measurements, also from other observatories, may be found at another webpage in Milan at http://www.merate.mi.astro.it/~gabriele/990510/ . This may happen if the explosion emits radiation in a beam which is pointed towards the Earth. Such beams are predicted by some models for the production of gamma-ray bursts. They are also favoured by many astronomers, because they can overcome the fundamental problem that gamma-ray bursts simply produce too much energy. If the energy is not emitted equally in all directions ("isotropically"), but rather in a preferred one along a beam, less energy is needed to produce the observed phenomenon. Such a break has been observed before, but this time it occurred at a very favourable moment, when the source was still relatively bright so that high-quality spectroscopic and multi-colour information could be obtained with the ESO telescopes. Together, these observations may provide an answer to the question whether beams exist in gamma-ray bursts and thus further help us to understand the as yet unknown cause of these mysterious explosions. Latest News ESO PR Photo 22g/99 ESO PR Photo 22g/99 [Normal - JPEG: 453 x 585 pix - 304k] Caption to PR Photo 22g/99 : V(isual) image of the sky field around GRB 990510 (here denoted "OT"), as obtained with the VLT ANTU telescope and FORS1 on May 18 UT during a 20 min exposure in 0.9 arcsec seeing conditions. The reproduction is in false colours to better show differences in intensity. North is up and east is left. Further photometric and spectroscopic observations with the ESO VLT, performed by Klaus Beuermann, Frederic Hessman and Klaus Reinsch of the Göttingen group of the FORS instrument team (Germany), have revealed the character of some of the objects that are seen close to the image of the afterglow of GRB 990510 (also referred to as the "Optical Transient" - OT). Two objects to the North are cool foreground stars of spectral types dM0 and about dM3, respectively; they are located in our Milky Way Galaxy. The object just to the South of the OT is probably also a star. A V(isual)-band image (PR Photo 22g/99) taken during the night between May 17 and 18 with the VLT/ANTU telescope and FORS1 now shows the OT at magnitude V = 24.5, with still no evidence for the host galaxy that is expected to appear when the afterglow has faded sufficiently. Outlook The great distances (high redshifts) of Gamma-Ray Bursts, plus the fact that a 9th magnitude optical flash was seen when another GRB exploded on January 23 this year, has attracted the attention of astronomers outside the GRB field. In fact, GRBs may soon become a very powerful tool to probe the early universe by guiding us to regions of very early star formation and the (proto)-galaxies and (proto)-clusters of which they are part. They will also allow the study of the chemical composition of absorbing clouds at very large distances. At the end of this year, the NASA satellite HETE-II will be launched, which is expected to provide about 50 GRB alerts per year and, most importantly, accurate localisations in the sky that will allow very fast follow-up observations, while the optical counterparts are still quite bright. It will then be possible to obtain more spectra, also of extremely distant bursts, and many new distance determinations can be made, revealing the distribution of intrinsic brightness of GRB's (the "luminosity function"). Other types of observations (e.g. polarimetry, as above) will also profit, leading to a progressive refinement of the available data. Thus there is good hope that astronomers will soon come closer to identifying the progenitors of these enormous explosions and to understand what is really going on. In this process, the huge light-collecting power of the VLT and the many other facilities at the ESO observatories will undoubtedly play an important role. Notes [1] Gamma-Ray Bursts are brief flashes of high-energy radiation. Satellites in orbit around the Earth and spacecraft in interplanetary orbits have detected several thousand such events since they were first discovered in the late 1960s. Earlier investigations established that they were so evenly distributed in the sky that they must be very distant (and hence very powerful) outbursts of some kind. Only in 1997 it became possible to observe the fading "afterglow" of one of these explosions in visible light, thanks to accurate positions available from the BeppoSAX satellite. Soon thereafter, another optical afterglow was detected; it was located in a faint galaxy whose distance could be measured. In 1998, a gamma-ray burst was detected in a galaxy over 8,300 million light-years away. Even the most exotic ideas proposed for these explosions, e.g. supergiant stars collapsing to black holes, black holes merging with neutron stars or other black holes, and other weird and wonderful notions have trouble accounting for explosions with the power of 10,000 million million suns. [2] The various reports issued by astronomers working on this and other gamma-ray burst events are available as GCN Circulars on the GRB Coordinates Network web-noteboard. [3] See also the Press Release, issued by SAAO on this occasion. [4] In astronomy, the redshift (z) denotes the fraction by which the lines in the spectrum of an object are shifted towards longer wavelengths. The observed redshift of a distant galaxy or intergalactic cloud gives a direct estimate of the universal expansion (i.e. the "recession velocity"). The detailed relation between redshift and distance depends on such quantities as the Hubble Constant, the average density of the universe, and the 'cosmological' Constant. For a standard cosmological model, redshift z = 1.6 corresponds to a distance of about 7,000 million light-years. [5] Assuming a Hubble Constant H 0 = 70 km/s/Mpc, mean density Omega 0 = 0.3 and a Cosmological Constant Lambda = 0. How to obtain ESO Press Information ESO Press Information is made available on the World-Wide Web (URL: http://www.eso.org../ ). ESO Press Photos may be reproduced, if credit is given to the European Southern Observatory.

Sharpest Ever VLT Images at NAOS-CONICA "First Light"

NASA Astrophysics Data System (ADS)

2001-12-01

Very Promising Start-Up of New Adaptive Optics Instrument at Paranal Summary A team of astronomers and engineers from French and German research institutes and ESO at the Paranal Observatory is celebrating the successful accomplishment of "First Light" for the NAOS-CONICA Adaptive Optics facility . With this event, another important milestone for the Very Large Telescope (VLT) project has been passed. Normally, the achievable image sharpness of a ground-based telescope is limited by the effect of atmospheric turbulence. However, with the Adaptive Optics (AO) technique, this drawback can be overcome and the telescope produces images that are at the theoretical limit, i.e., as sharp as if it were in space . Adaptive Optics works by means of a computer-controlled, flexible mirror that counteracts the image distortion induced by atmospheric turbulence in real time. The larger the main mirror of the telescope is, and the shorter the wavelength of the observed light, the sharper will be the images recorded. During a preceding four-week period of hard and concentrated work, the expert team assembled and installed this major astronomical instrument at the 8.2-m VLT YEPUN Unit Telescope (UT4). On November 25, 2001, following careful adjustments of this complex apparatus, a steady stream of photons from a southern star bounced off the computer-controlled deformable mirror inside NAOS and proceeded to form in CONICA the sharpest image produced so far by one of the VLT telescopes. With a core angular diameter of only 0.07 arcsec, this image is near the theoretical limit possible for a telescope of this size and at the infrared wavelength used for this demonstration (the K-band at 2.2 µm). Subsequent tests reached the spectacular performance of 0.04 arcsec in the J-band (wavelength 1.2 µm). "I am proud of this impressive achievement", says ESO Director General Catherine Cesarsky. "It shows the true potential of European science and technology and it provides a fine demonstration of the value of international collaboration. ESO and its partner institutes and companies in France and Germany have worked a long time towards this goal - with the first, extremely promising results, we shall soon be able to offer a new and fully tuned instrument to our wide research community." The NAOS adaptive optics corrector was built, under an ESO contract, by Office National d'Etudes et de Recherches Aérospatiales (ONERA) , Laboratoire d'Astrophysique de Grenoble (LAOG) and the DESPA and DASGAL laboratories of the Observatoire de Paris in France, in collaboration with ESO. The CONICA infra-red camera was built, under an ESO contract, by the Max-Planck-Institut für Astronomie (MPIA) (Heidelberg) and the Max-Planck Institut für Extraterrestrische Physik (MPE) (Garching) in Germany, in collaboration with ESO. The present event happens less than four weeks after "First Fringes" were achieved for the VLT Interferometer (VLTI) with two of the 8.2-m Unit Telescopes. No wonder that a spirit of great enthusiasm reigns at Paranal! Information for the media: ESO is producing a Video News Release ( ESO Video News Reel No. 13 ) with sequences from the NAOS-CONICA "First Light" event at Paranal, a computer animation illustrating the principle of adaptive optics in NAOS-CONICA, as well as the first astronomical images obtained. In addition to the usual distribution, this VNR will also be transmitted via satellite Friday 7 December 2001 from 09:00 to 09:15 CET (10:00 to 10:15 UT) on "Europe by Satellite" . These video images may be used free of charge by broadcasters. Satellite details, the script and the shotlist will be on-line from 6 December on the ESA TV Service Website http://television.esa.int. Also a pre-view Real Video Stream of the video news release will be available as of that date from this URL. Video Clip 07/01 : Various video scenes related to the NAOS-CONICA "First Light" Event ( ESO Video News Reel No. 13 ). PR Photo 33a/01 : NAOS-CONICA "First light" image of an 8-mag star. PR Photo 33b/01 : The moment of "First Light" at the YEPUN Control Consoles. PR Photo 33c/01 : Image of NGC 3603 (K-band) area (NAOS-CONICA) . PR Photo 33d/01 : Image of NGC 3603 wider field (ISAAC) PR Photo 33e/01 : I-band HST-WFPC2 image of NGC 3603 field . PR Photo 33f/01 : Animated GIF, with NAOS-CONICA (K-band) and HST-WFPC2 (I-band) images of NGC 3603 area PR Photo 33g/01 : Image of the Becklin-Neugebauer Object . PR Photo 33h/01 : Image of a very close double star . PR Photo 33i/01 : Image of a 17-magnitude reference star PR Photo 33j/01 : Image of the central area of the 30 Dor star cluster . PR Photo 33k/01 : The top of the Paranal Mountain (November 25, 2001). PR Photo 33l/01 : The NAOS-CONICA instrument attached to VLT YEPUN.. A very special moment at Paranal! First light for NAOS-CONICA at the VLT - PR Video Clip 07/01] ESO PR Video Clip 07/01 "First Light for NAOS-CONICA" (25 November 2001) (3850 frames/2:34 min) [MPEG Video+Audio; 160x120 pix; 3.6Mb] [MPEG Video+Audio; 320x240 pix; 8.9Mb] [RealMedia; streaming; 34kps] [RealMedia; streaming; 200kps] ESO Video Clip 07/01 provides some background scenes and images around the NAOS-CONICA "First Light" event on November 25, 2001 (extracted from ESO Video News Reel No. 13 ). Contents: NGC 3603 image from ISAAC and a smaller field as observed by NAOS-CONICA ; the Paranal platform in the afternoon, before the event; YEPUN and NAOS-CONICA with cryostat sounds; Tension is rising in the VLT Control Room; Wavefront Sensor display; the "Loop is Closed"; happy team members; the first corrected image on the screen; Images of NGC 3603 by HST and VLT; 30 Doradus central cluster; BN Object in Orion; Statement by the Head of the ESO Instrument Division. ESO PR Photo 33a/01 ESO PR Photo 33a/01 [Preview - JPEG: 317 x 400 pix - 27k] [Normal - JPEG: 800 x 634 pix - 176k] ESO PR Photo 33b/01 ESO PR Photo 33b/01 [Preview - JPEG: 400 x 322 pix - 176k] [Normal - JPEG: 800 x 644 pix - 360k] ESO PR Photo 33a/01 shows the first image in the infrared K-band (wavelength 2.2 µm) of a star (visual magnitude 8) obtained - before (left) and after (right) the adaptive optics was switched on (see the text). The middle panel displays the 3-D intensity profiles of these images, demonstrating the tremendous gain, both in image sharpness and central intensity. ESO PR Photo 33b/01 shows some of the NAOS-CONICA team members in the VLT Control Room at the moment of "First Light" in the night between November 25-26, 2001. From left to right: Thierry Fusco (ONERA), Clemens Storz (MPIA), Robin Arsenault (ESO), Gerard Rousset (ONERA). The numerous boxes with the many NAOS and CONICA parts arrived at the ESO Paranal Observatory on October 24, 2001. Astronomers and engineers from ESO and the participating institutes and organisations then began the painstaking assembly of these very complex instruments on one of the Nasmyth platforms on the fourth VLT 8.2-m Unit Telescope, YEPUN . Then followed days of technical tests and adjustments, working around the clock. In the afternoon of Sunday, November 25, the team finally declared the instrument fit to attempt its "First Light" observation. The YEPUN dome was opened at sunset and a small, rather apprehensive group gathered in the VLT Control Room, peering intensively at the computer screens over the shoulders of their colleagues, the telescope and instrument operators. Time passed imperceptibly to those present, as the basic calibrations required at this early stage to bring NAOS-CONICA to full operational state were successfully completed. Everybody sensed the special moment approaching when, finally, the telescope operator pushed a button and the giant telescope started to turn smoothly towards the first test object, an otherwise undistinguished star in our Milky Way. Its non-corrected infra-red image was recorded by the CONICA detector array and soon appeared on the computer screen. It was already very good by astronomical standards, with a diameter of only 0.50 arsec (FWHM), cf. PR Photo 33a/01 (left) . Then, by another command, the instrument operator switched on the NAOS adaptive optics system , thereby "closing the loop" for the first time on a sky field, by using that ordinary star as a reference light source to measure the atmospheric turbulence. Obediently, the deformable mirror in NAOS began to follow the "orders" that were issued 500 times per second by its powerful control computer.... As if by magics, that stellar image on the computer screen pulled itself together....! What seconds before had been a jumping, rather blurry patch of light suddenly became a rock-steady, razor-sharp and brilliant spot of light. The entire room burst into applause - there were happy faces and smiles all over, and then the operator announced the measured image diameter - a truly impressive 0.068 arcsec, already at this first try, cf. PR Photo 33a/01 (right) ! All the team members who were lucky to be there sent a special thought to those many others who had also put in over four years' hard and dedicated work to make this event a reality. The time of this historical moment was November 25, 2001, 23:00 Chilean time (November 26, 2001, 02:00 am UT) . During this and the following nights, more images were made of astronomcal objects, opening a new chapter of the long tradition of Adaptive Optics at ESO. More information about the NAOS-CONICA international collaboration , technical details about this instrument and its special advantages are available below. The first images The star-forming region around NGC 3603 ESO PR Photo 33c/01 ESO PR Photo 33c/01 [Preview - JPEG: 326 x 400 pix - 200k] [Normal - JPEG: 651 x 800 pix - 480k] ESO PR Photo 33d/01 ESO PR Photo 33d/01 [Preview - JPEG: 348 x 400 pix - 240k] [Normal - JPEG: 695 x 800 pix - 592k] Caption : PR Photo 33c/01 displays a NAOS-CONICA image of the starburst cluster NGC 3603, obtained during the second night of NAOS-CONICA operation. The sky region shown is some 20 arcsec to the North of the centre of the cluster. NAOS was compensating atmospheric disturbances by analyzing light from the central star with its visual wavefront sensor, while CONICA was observing in the K-band. The image is nearly diffraction-limited and has a Full-Width-Half-Maximum (FWHM) diameter of 0.07 arcsec, with a central Strehl ratio of 56% (a measure of the degree of concentration of the light). The exposure lasted 300 seconds. North is up and East is left. The field measures 27 x 27 arcsec. On PR Photo 33d/01 , the sky area shown in this NAOS-CONICA high-resolution image is indicated on an earlier image of a much larger area, obtained in 1999 with the ISAAC multi-mode instrument on VLT ANTU ( ESO PR 16/99 ) Among the first images to be obtained of astronomical objects was one of the stellar cluster NGC 3603 that is located in the Carina spiral arm in the Milky Way at a distance of about 20,000 light-years, cf. PR Photo 33c/01 . With its central starburst cluster, it is one of the densest and most massive star forming regions in our Galaxy. Some of the most massive stars - with masses up to 120 times the mass of our Sun - can be found in this cluster. For a long time astronomers have suspected that the formation of low-mass stars is suppressed by the presence of high-mass stars, but two years ago, stars with masses as low as 10% of the mass of our Sun were detected in NGC 3603 with the ISAAC multi-mode instrument at VLT ANTU, cf. PR Photo 33d/01 and ESO PR 16/99. The high stellar density in this region, however, prevented the search for objects with still lower masses, so-called Brown Dwarfs. The new, high-resolution K-band images like PR Photo 33c/01 , obtained with NAOS-CONICA at YEPUN, now for the first time facilitate the study of the elusive class of brown dwarfs in such a starburst environment. This will, among others, offer very valuable insight into the fundamental problem about the total amount of matter that is deposited into stars in star-forming regions. An illustration of the potential of Adaptive Optics ESO PR Photo 33e/01 ESO PR Photo 33e/01 [Preview - JPEG: 376 x 400 pix - 128k] [Normal - JPEG: 752 x 800 pix - 336k] ESO PR Photo 33f/01 ESO PR Photo 33f/01 [Animated GIF: 400 x 425 pix - 71k] Caption : PR Photo 33e/01 was obtained with the WFPC2 camera on the Hubble Space Telescope (HST) in the I-band (800nm). It is a 400-sec exposure and shows the same sky region as in the NAOS-CONICA image shown in PR Photo 33c/01. PR Photo 33f/01 provides a direct comparison of the two images (animated GIF). The HST image was extracted from archival data. HST is operated by NASA and ESA. Normally, the achievable image sharpness of a ground-based telescope is limited by the effect of atmospheric turbulence . However, the Adaptive Optics (AO) technique overcomes this problem and when the AO instrument is optimized, the telescope produces images that are at the theoretical limit, i.e., as sharp as if it were in space . The theoretical image diameter is inversely proportional to the diameter of the main mirror of the telescope and proportional to the wavelength of the observed light. Thus, the larger the telescope and the shorter the wavelength, the sharper will be the images recorded . To illustrate this, a comparison of the NAOS-CONICA image of NGC 3603 ( PR Photo 33c/01 ) is here made with a near-infrared image obtained earlier by the Hubble Space Telescope (HST) covering the same sky area ( PR Photo 33e/01 ). Both images are close to the theoretical limit ("diffraction limited"). However, the diameter of the VLT YEPUN mirror (8.2-m) is somewhat more than three times that of that of HST (2.4-m). This is "compensated" by the fact that the wavelength of the NAOS-CONICA image (2.2 µm) is about two-and-a-half times longer that than of the HST image (0.8 µm). The measured image diameters are therefore not too different, approx. 0.085 arcsec (HST) vrs. approx. 0.068 arcsec (VLT). Although the exposure times are similar (300 sec for the VLT image; 400 sec for the HST image), the VLT image shows considerably fainter objects. This is partly due to the larger mirror, partly because by observing at a longer wavelength, NAOS-CONICA can detect a host of cool low-mass stars. The Becklin-Neugebauer object and its associated nebulosity ESO PR Photo 33g/01 ESO PR Photo 33g/01 [Preview - JPEG: 299 x 400 pix - 128k] [Normal - JPEG: 597 x 800 pix - 272k] Caption : PR Photo 33g/01 is a composite (false-) colour image obtained by NAOS-CONICA of the region around the Becklin-Neugebauer object that is deeply embedded in the Orion Nebula. It is based on two exposures, one in the light of shock-excited molecular hydrogen line (H 2 ; wavelength 2.12 µm; here rendered as blue) and one in the broader K-band (2.2 µm; red) from ionized hydrogen. A third (green) image was produced as an "average" of the H 2 and K-band images. The field-of-view measures 20 x 25 arcsec 2 , cf. the 1 x 1 arcsec 2 square. North is up and east to the left. PR Photo 33g/01 is a composite image of the region around the Becklin-Neugebauer object (generally refered to as "BN" ). With its associated Kleinmann-Low nebula, it is located in the Orion star forming region at a distance of approx. 1500 light-years. It is the nearest high-mass star-forming complex. The immediate vicinity of BN (the brightest star in the image) is highly dynamic with outflows and cloudlets glowing in the light of shock-excited molecular hydrogen. While many masers and outflows have been detected, the identification of their driving sources is still lacking. Deep images in the infrared K and H bands, as well as in the light of molecular hydrogen emission were obtained with NAOS-CONICA at VLT YEPUN during the current tests. The new images facilitate the detection of fainter and smaller structures in the cloud than ever before. More details on the embedded star cluster are revealed as well. These observations were only made possible by the infrared wavefront sensor of NAOS. The latter is a unique capability of NAOS and allows to do adaptive optics on highly embedded infrared sources, which are practically invisible at optical wavelengths. Exploring the limits ESO PR Photo 33h/01 ESO PR Photo 33h/01 [Preview - JPEG: 400 x 260 pix - 44k] [Normal - JPEG: 800 x 520 pix - 112k] Caption : PR Photo 33h/01 shows a NAOS-CONICA image of the double star GJ 263 for which the angular distance between the two components is only 0.030 arcsec . The raw image, as directly recorded by CONICA, is shown in the middle, with a computer-processed (using the ONERA MISTRAL myopic deconvolution algorithm) version to the right. The recorded Point-Spread-Function (PSF) is shown to the left. For this, the C50S camera (0.01325 arcsec/pixel) was used, with an FeII filter at the near-infrared wavelength 1.257 µm. The exposure time was 10 seconds. ESO PR Photo 33i/01 ESO PR Photo 33i/01 [Preview - JPEG: 400 x 316 pix - 82k] [Normal - JPEG: 800 x 631 pix - 208k] Caption : PR Photo 33i/01 shows the near-diffraction-limited image of a 17-mag reference star , as recorded with NAOS-CONICA during a 200-second exposure in the K-band under 0.60 arcsec seeing. The 3D-profile is also shown. ESO PR Photo 33j/01 ESO PR Photo 33j/01 [Preview - JPEG: 342 x 400 pix - 83k] [Normal - JPEG: 684 x 800 pix - 200k] Caption : PR Photo 33j/01 shows the central cluster in the 30 Doradus HII region in the Large Magellanic Cloud (LMC), a satellite of our Milky Way Galaxy. It was obtained by NAOS-CONICA in the infrared K-band during a 600 second exposure. The field shown here measures 15 x 15 arcsec 2. PR Photos 33h-j/01 provide three examples of images obtained during specific tests where the observers pushed NAOS-CONICA towards the limits to explore the potential of the new instrument. Although, as expected, these images are not "perfect", they bear clear witness to the impressive performance, already at this early stage of the commissioning programme. The first PR Photo 33h/01 shows how diffraction-limited imaging with NAOS-CONICA at a wavelength of 1.257 µm allows to view the individual components of a close double star, here the binary star GJ 263 for which the angular distance between the two stars is only 0.030 arcsec (i.e., the angle subtended by a 1 Euro coin at a distance of 160 km). Spatially resolved observations of binary stars like this one will allow the determination of orbital parameters, and ultimately of the masses of the individual binary star components. After few days of optimisation and calibration, NAOS-CONICA was able to "close the loop" on a reference star as faint as visual magnitude 17 and to provide a fine diffraction-limited K-band image with Strehl ratio 19% under 0.6 arcsec seeing. PR Photo 33i/01 provides a view of this image, as seen in the recorder frame and as a 3D-profile. The exposure time was 200 seconds. The ability to use reference stars as faint as this is an enormous asset for NAOS-CONICA - it will be first to offer this capability to non-specialist users with an instrument on an 8-10 m class telescope . This permits to access many sky fields and already get significant AO corrections, without having to wait for the artificial laser guide star now being constructed for the VLT, see below. 30 Doradus in the Large Magellanic Cloud (LMC - a satellite of our Galaxy) is the most luminous, giant HII region in the Local Group of Galaxies. It is powered by a massive star cluster with more than 100 ultra-luminous stars (of the "Wolf-Rayet"-type and O-stars). The NAOS CONICA K-band image PR Photo 33x/01 resolves the dense stellar core of high-mass stars at the centre of the cluster, revealing thousands of lower mass cluster members. Due to the lack of a sufficiently bright, isolated and single reference star in this sky field, the observers used instead the bright central star complex (R136a) to generate the corrective signals to the flexible mirror, needed to compensate for the atmospheric turbulence. However, R136a is not a round object; it is strongly elongated in the "5 hour"-direction. As a result, all star images seen in this photo are slightly elongated in the same direction as R136a. Nevertheless, this is a small penalty to pay for the large improvement obtained over a direct (seeing-limited) image! Adaptive Optics at ESO - a long tradition ESO PR Photo 33k/01 ESO PR Photo 33k/01 [Preview - JPEG: 400 x 320 pix - 144k] [Normal - JPEG: 800 x 639 pix - 344k] [Hi-Res - JPEG: 3000 x 2398 pix - 3.0M] ESO PR Photo 33l/01 ESO PR Photo 33l/01 [Preview - JPEG: 400 x 367 pix - 47k] [Normal - JPEG: 800 x 734 pix - 592k] [Hi-Res - JPEG: 3000 x 2754 pix - 3.9M] Caption : PR Photo 33k/01 is a view of the upper platform at the ESO Paranal Observatory with the four enclosures for the VLT 8.2-m Unit Telescopes and the partly subterranean Interferometric Laboratory (at centre). YEPUN (UT4) is housed in the enclosure to the right. This photo was obtained in the evening of November 25, 2001, some hours before "First Light" was achieved for the new NAOS-CONICA instrument, mounted at that telescope. PR Photo 33l/01 NAOS-CONICA installed on the Nasmyth B platform of the 8.2-m VLT YEPUN Unit Telescope. From left to right: the telescope adapter/rotator (dark blue), NAOS (light blue) and the CONICA cryostat (red). The control electronics is housed in the white cabinet. "Adaptive Optics" is a modern buzzword of astronomy. It embodies the seemingly magic way by which ground-based telescopes can overcome the undesirable blurring effect of atmospheric turbulence that has plagued astronomers for centuries. With "Adaptive Optics", the images of stars and galaxies captured by these instruments are now as sharp as theoretically possible. Or, as the experts like to say, "it is as if a giant ground-based telescope is 'lifted' into space by a magic hand!" . Adaptive Optics works by means of a computer-controlled, flexible mirror that counteracts the image distortion induced by atmospheric turbulence in real time. The concept is not new. Already in 1989, the first Adaptive Optics system ever built for Astronomy (aptly named "COME-ON" ) was installed on the 3.6-m telescope at the ESO La Silla Observatory, as the early fruit of a highly successful continuing collaboration between ESO and French research institutes (ONERA and Observatoire de Paris). Ten years ago, ESO initiated an Adaptive Optics program , to serve the needs for its frontline VLT project. In 1993, the Adaptive Optics facility (ADONIS) was offered to Europe's astronomers, as the first instrument of its kind, available for non-specialists. It is still in operation and continues to produce frontline results, cf. ESO PR 22/01. In 1997, ESO launched a collaborative effort with a French Consortium ( see below) for the development of the NAOS Nasmyth Adaptive Optics System . With its associated CONICA IR high angular resolution camera , developed with a German Consortium ( see below), it provides a full high angular resolution capability on the VLT at Paranal. With the successful "First Light" on November 25, 2001, this project is now about to enter into the operational phase. The advantages of NAOS-CONICA NAOS-CONICA belongs to a new generation of sophisticated adaptive optics (AO) devices. They have certain advantages over past systems. In particular, NAOS is unique in being equipped with an infrared-sensitive Wavefront Sensor (WFS) that permits to look inside regions that are highly obscured by interstellar dust and therefore unobservable in visible light. With its other WFS for visible light , NAOS should be able to achieve the highest degree of light concentration (the so-called "Strehl ratio") obtained at any existing 8-m class telescope. It also provides partially corrected images, using reference stars (see PR Photo 33e/01 ) as faint as visual magnitude 18, fainter than demonstrated so far at any other AO system at such large telescope. A major advantage of CONICA is to offer the large format and very high image quality required to fully match NAOS' performance , as well as a variety of observing modes. Moreover, NAOS-CONICA is the first astronomical AO instrument to be offered with a full end-to-end observing capability. It is completely integrated into the VLT dataflow system , with a seamless process from the preparation of the observations, including optimization of the instrument, to their execution at the telescope and on to automatic data quality assessment and storage in the VLT Archive. Collaboration and Institutes The Nasmyth Adaptive Optics System (NAOS) has been developed, with the support of INSU-CNRS, by a French Consortium in collaboration with ESO. The French consortium consists of Office National d'Etudes et de Recherches Aérospatiales (ONERA) , Laboratoire d'Astrophysique de Grenoble (LAOG) and Observatoire de Paris (DESPA and DASGAL). The Project Manager is Gérard Rousset (ONERA), the Instrument Responsible is François Lacombe (Observatoire de Paris) and the Project Scientist is Anne-Marie Lagrange (Laboratoire d'Astrophysique de Grenoble). The CONICA Near-Infrared CAmera has been developed by a German Consortium, with an extensive ESO collaboration. The Consortium consists of Max-Planck-Institut für Astronomie (MPIA) (Heidelberg) and the Max-Planck-Institut für Extraterrestrische Physik (MPE) (Garching). The Principal Investigator (PI) is Rainer Lenzen (MPIA), with Reiner Hofmann (MPE) as Co-Investigator. Contacts Norbert Hubin European Southern Observatory Garching, Germany Tel.: +4989-3200-6517 email: nhubin@eso.org Alan Moorwood European Southern Observatory Garching, Germany Tel.: +4989-3200-6294 email: amoorwoo@eso.org Appendix: Technical Information about NAOS and CONICA Once fully tested, NAOS-CONICA will provide adaptive optics assisted imaging, polarimetry and spectroscopy in the 1 - 5 µm waveband. NAOS is an adaptive optics system equipped with both visible and infrared, Shack-Hartmann type, wavefront sensors. Provided a reference source (e.g., a star) with visual magnitude V brighter than 18 or K-magnitude brighter than 13 mag is available within 60 arcsec of the science target, NAOS-CONICA will ultimately offer diffraction limited resolution at the level of 0.030 arcsec at a wavelength of 1 µm, albeit with a large halo around the image core for the faint end of the reference source brightness. This may be compared with VLT median seeing images of 0.65 arcsec at a wavelength of 1 µm and exceptionally good images around 0.30 arcsec. NAOS-CONICA is installed at Nasmyth Focus B at VLT YEPUN (UT4). In about two years' time, this instrument will benefit from a sodium Laser Guide Star (LGS) facility. The creation of an artificial guide star is then possible in any sky field of interest, thereby providing a much better sky coverage than what is possible with natural guide stars only. NAOS is equipped with two wavefront sensors, one in the visible part of the spectrum (0.45 - 0.95 µm) and one in the infrared part (1 - 2.5 µm); both are based on the Shack-Hartmann principle. The maximum correction frequency is about 500 Hz. There are 185 deformable mirror actuators plus a tip-tilt mirror correction. Together, they should permit to obtain a high Strehl ratio in the K-band (2.2 µm), up to 70%, depending on the actual seeing and waveband. Both the visible and IR wavefront sensors (WFS) have been optimized to provide AO correction for faint objects/stars. The visible WFS provides a low-order correction for objects as faint as visual magnitude ~ 18. The IR WFS will provide a low-order correction for objects as faint as K-magnitude 13. CONICA is a high performant instrument in terms of image quality and detector sensitivity. It has been designed so that it is able to make optimal use of the AO system. Inherent mechanical flexures are corrected on-line by NAOS through a pointing model. It offers a variety of modes, e.g., direct imaging, polarimetry, slit spectroscopy, coronagraphy and spectro-imaging. The ESO PR Video Clips service to visitors to the ESO website provides "animated" illustrations of the ongoing work and events at the European Southern Observatory. The most recent clip was: ESO PR Video Clip 06/01 about observations of a binary star (8 October 2001). Information is also available on the web about other ESO videos.

Distant World in Peril Discovered from La Silla

NASA Astrophysics Data System (ADS)

2003-01-01

Giant Exoplanet Orbits Giant Star Summary When, in a distant future, the Sun begins to expand and evolves into a "giant" star, the surface temperature on the Earth will rise dramatically and our home planet will eventually be incinerated by that central body. Fortunately for us, this dramatic event is several billion years away. However, that sad fate will befall another planet, just discovered in orbit about the giant star HD 47536, already within a few tens of millions of years. At a distance of nearly 400 light-years from us, it is the second-remotest planetary system discovered to date [1]. This is an interesting side-result of a major research project, now carried out by a European-Brazilian team of astronomers [2]. In the course of a three-year spectroscopic survey, they have observed about 80 giant stars in the southern sky with the advanced FEROS spectrograph on the 1.52-m telescope installed at the ESO La Silla Observatory (Chile). It is one of these stars that has just been found to host a giant planet. This is only the fourth such case known and with a diameter of about 33 million km (or 23.5 times that of our Sun), HD 47536 is by far the largest of those giant stars [1]. The distance of the planet from the star is still of the order of 300 million km (or twice the distance of the Earth from the Sun), a safe margin now, but this will not always be so. The orbital period is 712 days, i.e., somewhat less than two Earth years, and the planet's mass is 5 - 10 times that of Jupiter. The presence of exoplanets in orbit around giant stars, some of which will eventually perish into their central star (be "cannibalized"), provides a possible explanation of the anomalous abundance of certain chemical elements that is observed in the atmospheres of some stars, cf. ESO PR 10/01. This interesting discovery bodes well for coming observations of exoplanetary systems with new, more powerful instruments, like HARPS to be installed next year at the ESO 3.6-m telescope on La Silla, and also the Very Large Telescope Interferometer (VLTI) now being commissioned at Paranal. PR Photo 05a/03: Giant stars observed in this programme (HR-diagram) PR Photo 05b/03: Giant star HD 47536. PR Photo 05c/03: "Velocity curve" of HD 47536. PR Photo 05d/03: Distance distribution of known exoplanets. Stellar evolution The structure and evolution of stars like our Sun are quite well understood. They are born by contraction in immense clouds of dust and gas and when the central density and temperature become high enough, nuclear fusion ignites in their interiors. Then follows a long period of relative calm - the Sun is now in this phase - that ends when the nuclear fuel runs out. A direct result is that the star begins to expand and soon becomes a "giant". During this phase, the surface temperature drops somewhat (but is still several thousand degrees) and the colour of the star changes from yellow to red. In the case of the Sun, this will happen some billion years from now. At some moment, our star will become larger and the surface of our home planet will become exceedingly hot, incinerating whatever remaining lifeforms that cannot protect themselves. Later, the Sun will shred its outer layers into space and a small, hot core will become visible. This final stage of stellar evolution can be observed as beautiful "Planetary Nebulae", e.g. the Dumbbell Nebula of which an impressive VLT photo is available (ESO PR Photos 38a-b/98). A spectroscopic survey of giant stars ESO PR Photo 05a/03 ESO PR Photo 05a/03 [Preview - JPEG: 400 x 467 pix - 128k [Normal - JPEG: 800 x 933 pix - 288k] Caption: PR Photo 05a/03 shows part of the Hertzsprung-Russell (HR) diagram [3] - a very useful way to illustrate stellar evolution. Plotting the temperature of solar-type stars (abscissa; in degrees Kelvin or as a "colour index") against their intrinsic brightness (ordinate; in solar units) reveals a typical distribution (hotter stars are less bright than cooler stars) that reflect their different evolutionary stages. With time, the position of the Sun in this diagram (now at the lower left) will migrate towards the upper right as it expands and becomes brighter. This direction corresponds to increasing radius. The approximately 80 stars plotted here are those that are being spectroscopically observed within the present programme; cf. the text. The positions and names of four giant stars that are known to host planets are marked [1]. The largest and brightest of them is HD 47536, as indicated by its upper-right position, relative to the three others. Since 1999, a European-Brazilian team of astronomers [2] has been studying a selection of comparatively bright giant stars with the goal to learn more about their physical properties. In particular, detailed spectra have been obtained by means of the advanced FEROS spectrograph on the 1.52-m telescope that is installed at the ESO La Silla Observatory in Chile, cf. ESO PR 03/99. About 80 stars have been regularly observed with this instrument, in order to search for possible velocity variations [4]. In PR Photo 05a/03, their temperature and intrinsic brightness are plotted in the so-called Hertzsprung-Russell diagram [3], a very useful way of illustrating stellar evolution. The background for this ambitious research project is that recent observations indicate that some giant stars may undergo small velocity variations with periods from days to years. While short-term variations are likely to be caused by oscillations in their extended and tenous atmospheres, there are at least three possible causes for long-term variations: 1) the gravitational pull of one or more orbiting planets, 2) radial pulsations of the entire star, or 3) variable surface patterns due to stellar activity. Which of these possibilities are behind the observed velocity variations? How many of those stars pulsate? Do some of them possess planets and if so, are planetary systems around giant stars common or not? "These are very fundamental questions" says team leader Johny Setiawan of the Kiepenheuer-Institut in Freiburg (Germany), "and the present discovery was somehow unexpected. Many of our giant stars show similar long-period velocity variations which we suspect are due to stellar activity". A planet around HD 47536 ESO PR Photo 05b/03 ESO PR Photo 05b/03 [Preview - JPEG: 400 x 462 pix - 68k [Normal - JPEG: 800 x 924 pix - 360k] ESO PR Photo 05c/03 ESO PR Photo 05c/03 [Preview - JPEG: 400 x 433 pix - 112k [Normal - JPEG: 800 x 866 pix - 256k] ESO PR Photo 05d/03 ESO PR Photo 05d/03 [Preview - JPEG: 477 x 400 pix - 96k [Normal - JPEG: 953 x 800 pix - 272k] Captions: PR Photo 05b/03 shows a sky area of 10 x 10 arcmin2 around the 6th-magnitude giant star HD 47536 at which a new exoplanet has been found (reproduced from the Digital Sky Survey [STScI Digitized Sky Survey, (C) 1993, 1994, AURA, Inc. all rights reserved - cf. http://archive.eso.org/dss/dss]). The pattern is caused by internal reflections in the telescope from this relatively bright object. PR Photo 05c/03 displays the "velocity curve" of HD 47536, caused by the pull of the orbiting planet during the 712-day period (abscissa: Julian Date - 2,400,000; ordinate: velocity in kilometres per second along the line-of-sight). Error bars indicate the accuracy of the measurements. The fully-drawn curve is the computed velocity curve, corresponding to the best-fitting planetary orbit. The lower part of the diagram displays the deviation of the measurements from this curve - in the mean about 0.025 km/sec, or 25 m/sec. In PR Photo 05d/03, the distribution of the distances of the 100+ known exoplanets is shown, with the planet around HD 47536 at the extreme end. The extensive observations began three years ago, with the main aim to pin down the cause(s) for any possible long-term variations. For this programme to succeed, it was also necessary to monitor other properties of these stars, in particular more rapid changes in the upper atmosphere ("stellar activity"). The first results indicate that about 70% of these stars display velocity variations. Among them, the 6th-magnitude star HD 47536 in the southern constellation of Canis Major (The Great Dog) soon caught the eye of the observers, as the measured velocity variations strongly indicated the presence of a planetary companion. The same FEROS spectra also show that other possible explanations, including stellar activity, are very unlikely to be responsible for those variations. At a distance of 396 light-years, the new exoplanet is the second-most remote one found to date. It moves around HD 47536 in a slightly elongated orbit and one revolution lasts somewhat less than two Earth years (712 days). Depending on the mass of the star (which is not well known yet), the distance of the planet from the star is somewhere between 240 and 337 million km (the mean distance of planet Mars to the Sun is 228 million km) and the new planet has between 4.9 and 9.7 times the mass of planet Jupiter (for assumed stellar mass 1.1 and 3.0 times that of the Sun, respectively). The indicated planetary mass is in any case too small for this object to be a "failed star", it is a bona-fide planet. Implications "We are very excited about this discovery", says Luca Pasquini of ESO, "because it now widens the search for exoplanets towards more massive stars. The observational problem is that most massive stars rotate very rapidly during the first phase of their life. This makes accurate measurements of minute velocity variations caused by the gravitaional pull of accompanying planets virtually impossible. However, in the later phase of their lives when they become giants, they slow down considerably and we then have a much better chance of detecting possible exoplanets in orbit around them." The giant planet in orbit around HD 47536 is now most probably witnessing some of those dramatic events that will happen to the Earth some billions of years from now. Its central star is slowly but steadily expanding and occupies a progressively larger fraction of the sky above the planet. The insolation is becoming more and more intense, with the resulting atmospheric effects - rising temperature and violent winds. Some tens of millions of years from now, the unlucky planet is doomed to lose its gaseous layers entirely and the surface will become burning hot. The discovery has other interesting implications. For years, the present team of astronomers has been studying certain giant stars that are found to contain much lithium. However, this light element is rapidly consumed in such stars and it should really not be there, see also ESO PR 10/01. "No problem now", says team member Licio da Silva from the Observatório Nacional in Rio de Janeiro (Brazil), "one obvious possibility is that those stars have obtained their lithium by recently swallowing a nearby planet. But until recently, this hypothesis was considered rather exotic, because of the lack of evidence of planets in danger". Indeed, with this discovery of a giant planet near a giant star, that explanation is looking quite plausible. Perspectives With over 70 other giant stars still under close scrutiny, the perspectives for the present programme appear very promising. The present discovery comes at a moment when the team is working hard to sift through the many observational data - it is quite possible that they will find other giant stars with planet-induced velocity variations. At the same time, the observational means for this kind of research are getting ever more powerful. Soon, the HARPS very high-precision spectrometer will be installed at the ESO 3.6-m telescope on La Silla. It has been built by the Geneva Observatory in collaboration with ESO and will be dedicated to the search for exoplanets.

High-resolution seismic-reflection data offshore of Dana Point, southern California borderland

USGS Publications Warehouse

Sliter, Ray W.; Ryan, Holly F.; Triezenberg, Peter J.

2010-01-01

The U.S. Geological Survey collected high-resolution shallow seismic-reflection profiles in September 2006 in the offshore area between Dana Point and San Mateo Point in southern Orange and northern San Diego Counties, California. Reflection profiles were located to image folds and reverse faults associated with the San Mateo fault zone and high-angle strike-slip faults near the shelf break (the Newport-Inglewood fault zone) and at the base of the slope. Interpretations of these data were used to update the USGS Quaternary fault database and in shaking hazard models for the State of California developed by the Working Group for California Earthquake Probabilities. This cruise was funded by the U.S. Geological Survey Coastal and Marine Catastrophic Hazards project. Seismic-reflection data were acquired aboard the R/V Sea Explorer, which is operated by the Ocean Institute at Dana Point. A SIG ELC820 minisparker seismic source and a SIG single-channel streamer were used. More than 420 km of seismic-reflection data were collected. This report includes maps of the seismic-survey sections, linked to Google Earth? software, and digital data files showing images of each transect in SEG-Y, JPEG, and TIFF formats.

A deep learning method for early screening of lung cancer

NASA Astrophysics Data System (ADS)

Zhang, Kunpeng; Jiang, Huiqin; Ma, Ling; Gao, Jianbo; Yang, Xiaopeng

2018-04-01

Lung cancer is the leading cause of cancer-related deaths among men. In this paper, we propose a pulmonary nodule detection method for early screening of lung cancer based on the improved AlexNet model. In order to maintain the same image quality as the existing B/S architecture PACS system, we convert the original CT image into JPEG format image by analyzing the DICOM file firstly. Secondly, in view of the large size and complex background of CT chest images, we design the convolution neural network on basis of AlexNet model and sparse convolution structure. At last we train our models on the software named DIGITS which is provided by NVIDIA. The main contribution of this paper is to apply the convolutional neural network for the early screening of lung cancer and improve the screening accuracy by combining the AlexNet model with the sparse convolution structure. We make a series of experiments on the chest CT images using the proposed method, of which the sensitivity and specificity indicates that the method presented in this paper can effectively improve the accuracy of early screening of lung cancer and it has certain clinical significance at the same time.

WMS Server 2.0

NASA Technical Reports Server (NTRS)

Plesea, Lucian; Wood, James F.

2012-01-01

This software is a simple, yet flexible server of raster map products, compliant with the Open Geospatial Consortium (OGC) Web Map Service (WMS) 1.1.1 protocol. The server is a full implementation of the OGC WMS 1.1.1 as a fastCGI client and using Geospatial Data Abstraction Library (GDAL) for data access. The server can operate in a proxy mode, where all or part of the WMS requests are done on a back server. The server has explicit support for a colocated tiled WMS, including rapid response of black (no-data) requests. It generates JPEG and PNG images, including 16-bit PNG. The GDAL back-end support allows great flexibility on the data access. The server is a port to a Linux/GDAL platform from the original IRIX/IL platform. It is simpler to configure and use, and depending on the storage format used, it has better performance than other available implementations. The WMS server 2.0 is a high-performance WMS implementation due to the fastCGI architecture. The use of GDAL data back end allows for great flexibility. The configuration is relatively simple, based on a single XML file. It provides scaling and cropping, as well as blending of multiple layers based on layer transparency.

DUST DISK AROUND A BLACK HOLE IN GALAXY NGC 4261

NASA Technical Reports Server (NTRS)

2002-01-01

This is a Hubble Space Telescope image of an 800-light-year-wide spiral-shaped disk of dust fueling a massive black hole in the center of galaxy, NGC 4261, located 100 million light-years away in the direction of the constellation Virgo. By measuring the speed of gas swirling around the black hole, astronomers calculate that the object at the center of the disk is 1.2 billion times the mass of our Sun, yet concentrated into a region of space not much larger than our solar system. The strikingly geometric disk -- which contains enough mass to make 100,000 stars like our Sun -- was first identified in Hubble observations made in 1992. These new Hubble images reveal for the first time structure in the disk, which may be produced by waves or instabilities in the disk. Hubble also reveals that the disk and black hole are offset from the center of NGC 4261, implying some sort of dynamical interaction is taking place, that has yet to be fully explained. Credit: L. Ferrarese (Johns Hopkins University) and NASA Image files in GIF and JPEG format, captions, and press release text may be accessed on Internet via anonymous ftp from oposite.stsci.edu in /pubinfo:

An analysis of absorbing image on the Indonesian text by using color matching

NASA Astrophysics Data System (ADS)

Hutagalung, G. A.; Tulus; Iryanto; Lubis, Y. F. A.; Khairani, M.; Suriati

2018-03-01

The insertion of messages in an image is performed by inserting per character message in some pixels. One way of inserting a message into an image is by inserting the ASCII decimal value of a character to the decimal value of the primary color of the image. Messages that use characters in letters, numbers or symbols, where the use of letters of each word is different in number and frequency of use, as well as the use of letters in various messages within each language. In Indonesian language, the use of the letter A to be the most widely used, and the use of other letters greatly affect the clarity of a message or text presented in the language. This study aims to determine the capacity to absorb the message in Indonesian language from an image and what are the things that affect the difference. The data used in this study consists of several images in JPG or JPEG format can be obtained from the image drawing software or hardware of the image makers at different image sizes. The results of testing on four samples of a color image have been obtained by using an image size of 1200 X 1920.

The Blob, the Very Rare Massive Star and the Two Populations

NASA Astrophysics Data System (ADS)

2005-04-01

The nebula N214 [1] is a large region of gas and dust located in a remote part of our neighbouring galaxy, the Large Magellanic Cloud. N214 is a quite remarkable site where massive stars are forming. In particular, its main component, N214C (also named NGC 2103 or DEM 293), is of special interest since it hosts a very rare massive star, known as Sk-71 51 [2] and belonging to a peculiar class with only a dozen known members in the whole sky. N214C thus provides an excellent opportunity for studying the formation site of such stars. Using ESO's 3.5-m New Technology telescope (NTT) located at La Silla (Chile) and the SuSI2 and EMMI instruments, astronomers from France and the USA [3] studied in great depth this unusual region by taking the highest resolution images so far as well as a series of spectra of the most prominent objects present. N214C is a complex of ionised hot gas, a so-called H II region [4], spreading over 170 by 125 light-years (see ESO PR Photo 12b/05). At the centre of the nebula lies Sk-71 51, the region's brightest and hottest star. At a distance of ~12 light-years north of Sk-71 51 runs a long arc of highly compressed gas created by the strong stellar wind of the star. There are a dozen less bright stars scattered across the nebula and mainly around Sk-71 51. Moreover, several fine, filamentary structures and fine pillars are visible. The green colour in the composite image, which covers the bulk of the N214C region, comes from doubly ionised oxygen atoms [5] and indicates that the nebula must be extremely hot over a very large extent. The Star Sk-71 51 decomposed ESO PR Photo 12c/05 ESO PR Photo 12c/05 The Cluster Around Sk-71 51 [Preview - JPEG: 400 x 620 pix - 189k] [Normal - JPEG: 800 x 1239 pix - 528k] Caption: ESO PR Photo 12c/05 shows a small field around the hot star Sk-71 51 as seen through the V filter. The left image shows a single frame after subtraction of the nebular background. The image quality - or seeing - is roughly 8.5 pixels, corresponding to 0".72. The right panel shows the same field after applying a sophisticated image-sharpening software ("deconvolution"). The resulting resolution of the sources is 3 pixels, or 0".25 on the sky. This shows that the brightest object is in fact a very tight cluster, composed of 6 stars in an area 4 arcseconds wide. The field size is 21".7 x 21".7. North is up and east to the left. The central and brightest object in ESO PR Photo 12b/05 is not a single star but a small, compact cluster of stars. In order to study this very tight cluster in great detail, the astronomers used sophisticated image-sharpening software to produce high-resolution images on which precise brightness and positional measurements could then be performed (see ESO PR Photo 12c/05). This so-called "deconvolution" technique makes it possible to visualize this complex system much better, leading to the conclusion that the tight core of the Sk-71 51 cluster, covering a ~ 4 arc seconds area, is made up of at least 6 components. From additional spectra taken with EMMI (ESO Multi-Mode Instrument), the brightest component is found to belong to the rare class of very massive stars of spectral type O2 V((f*)). The astronomers derive a mass of ~80 solar masses for this object but it might well be that this is a multiple system, in which case, each component would be less massive. Stellar populations ESO PR Photo 12d/05 ESO PR Photo 12d/05 Colour-Magnitude Diagram of 2341 Stars towards N214C [Preview - JPEG: 400 x 453 pix - 118k] [Normal - JPEG: 800 x 906 pix - 278k] Caption: ESO PR Photo 12d/05 presents a colour-magnitude, V versus B - V, diagram for the 2341 stars observed toward LMC N214C. Three curves are shown, representing the positions of stars having an age of 1 million years (red curve), 1,000 million years (dotted blue), and 10,000 million years (dashed-dotted green), computed for the LMC metallicity and distance. It is clear from this diagram that N214C is composed of two populations: a very young one, containing very massive stars, and an older one. Star numbered 17 is the main component of the Sk -71 51 cluster. From the unique images obtained and reproduced as ESO PR Photo 12b/05, the astronomers could study in great depth the properties of the 2341 stars lying towards the N214C region. This was done by putting them in a so-called colour-magnitude diagram, where the abscissa is the colour (representative of the temperature of the object) and the ordinate the magnitude (related to the intrinsic brightness). Plotting the temperature of stars against their intrinsic brightness reveals a typical distribution that reflects their different evolutionary stages. Two main stellar populations show up in this particular diagram (ESO PR Photo 12d/05): a main sequence, that is, stars that like the Sun are still centrally burning their hydrogen, and an evolved population. The main sequence is made up of stars with initial masses from roughly 2-4 to about 80 solar masses. The stars that follow the red line on ESO PR Photo 12d/05 are main sequence stars still very young, with an estimated age of about 1 million years only. The evolved population is mainly composed of much older and lower mass stars, having an age of 1,000 million years. From their work, the astronomers classified several massive O and B stars, which are associated with the H II region and therefore contribute to its ionisation. A Blob of Ionised Gas ESO PR Photo 12e/05 ESO PR Photo 12e/05 The Nebular Blob in N214C [Preview - JPEG: 400 x 455 pix - 182k] [Normal - JPEG: 800 x 909 pix - 682k] [Full Res - JPEG: 1228 x 1395 pix - 1.7M] Caption: ESO PR Photo 12e/05 zooms-in on the nebular blob lying ~ 60" (50 light-years) north of the Sk-71 51 cluster. The image is based on individual exposures taken through narrow-band filters around H-alpha (red), [O III] (green) and H-beta (blue). The field size is 104" x 101" on the sky, corresponding to roughly 85 by 82 light years. North is up and east to the left. A remarkable feature of N214C is the presence of a globular blob of hot and ionised gas at ~ 60 arc seconds (~ 50 light-years in projection) north of Sk-71 51. It appears as a sphere about four light-years across, split into two lobes by a dust lane which runs along an almost north-south direction (ESO PR Photo 12d/05). The blob seems to be placed on a ridge of ionised gas that follows the structure of the blob, implying a possible interaction. The H II blob coincides with a strong infrared source, 05423-7120, which was detected with the IRAS satellite. The observations indicate the presence of a massive heat source, 200,000 times more luminous than the Sun. This is more probably due to an O7 V star of about 40 solar masses embedded in an infrared cluster. Alternatively, it might well be that the heating arises from a very massive star of about 100 solar masses still in the process of being formed. "It is possible that the blob resulted from massive star formation following the collapse of a thin shell of neutral matter accumulated through the effect of strong irradiation and heating of the star Sk-71 51", says Mohammad Heydari-Malayeri from the Observatoire de Paris (France) and member of the team."Such a "sequential star formation" has probably occurred also toward the southern ridge of N214C". Newcomer to the Family The compact H II region discovered in N214C may be a newcomer to the family of HEBs ("High Excitation Blobs") in the Magellanic Clouds, the first member of which was detected in LMC N159 at ESO. In contrast to the typical H II regions of the Magellanic Clouds, which are extended structures spanning more than 150 light years and are powered by a large number of hot stars, HEBs are dense, small regions usually "only" 4 to 9 light-years wide. Moreover, they often form adjacent to or apparently inside the typical giant H II regions, and rarely in isolation. "The formation mechanisms of these objects are not yet fully understood but it seems however sure that they represent the youngest massive stars of their OB associations", explains Frederic Meynadier, another member of the team from the Observatoire de Paris. "So far only a half-dozen of them have been detected and studied using the ESO telescopes as well as the Hubble Space Telescope. But the stars responsible for the excitation of the tightest or youngest members of the family still remain to be detected." More information The research made on N214C has been presented in a paper accepted for publication by the leading professional journal, Astronomy and Astrophysics ("The LMC H II Region N214C and its peculiar nebular blob", by F. Meynadier, M. Heydari-Malayeri and Nolan R. Walborn). The full text is freely accessible as a PDF file from the A&A web site. Notes [1]: The letter "N" (for "Nebula") in the designation of these objects indicates that they were included in the "Catalogue of H-alpha emission stars and nebulae in the Magellanic Clouds" compiled and published in 1956 by American astronomer-astronaut Karl Henize (1926 - 1993). [2]: The name Sk-71 51, is the abbreviation of Sanduleak -71 51. The American astronomer Nicholas Sanduleak, while working at the Cerro Tololo Observatory, published in 1970 an important list of objects (stars and nebulae showing emission-lines in their spectra) in the Magellanic Clouds. The "-71" in the star's name is the declination of the object, while the "51" is the entry number in the catalogue. [3]: The team of astronomers consists of Frederic Meynadier and Mohammad Heydari-Malayeri (LERMA, Paris Observatory, France), and Nolan R. Walborn (Space Telescope Science Institute, USA). [4]: A gas is said to be ionised when its atoms have lost one or more electrons - in this case by the action of energetic ultraviolet radiation emitted by very hot and luminous stars close by. The heated gas shines mostly in the light of ionized hydrogen (H) atoms, leading to an emission nebula. Such nebulae are referred to as "H II regions". The well-known Orion Nebula is an outstanding example of that type of nebula, cf. ESO PR Photos 03a-c/01 and ESO PR Photo 20/04. [5]: The hotter the central object of an emission nebula, the hotter and more excited will be the surrounding nebula. The word "excitation" refers to the degree of ionization of the nebular gas. The more energetic the impinging particles and radiation, the more electrons will be lost and higher is the degree of excitation. In N214C, the central cluster of stars is so hot that the oxygen atoms are twice ionized, i.e. they have lost two electrons.

Capacity is the Wrong Paradigm

DTIC Science & Technology

2002-01-01

short, steganography values detection over ro- bustness, whereas watermarking values robustness over de - tection.) Hiding techniques for JPEG images ...world length of the code. D: If the algorithm is known, this method is trivially de - tectable if we are sending images (with no encryption). If we are...implications of the work of Chaitin and Kolmogorov on algorithmic complex- ity [5]. We have also concentrated on screen images in this paper and have not

Aladin Lite: Lightweight sky atlas for browsers

NASA Astrophysics Data System (ADS)

Boch, Thomas

2014-02-01

Aladin Lite is a lightweight version of the Aladin tool, running in the browser and geared towards simple visualization of a sky region. It allows visualization of image surveys (JPEG multi-resolution HEALPix all-sky surveys) and permits superimposing tabular (VOTable) and footprints (STC-S) data. Aladin Lite is powered by HTML5 canvas technology and is easily embeddable on any web page and can also be controlled through a Javacript API.

JPEG 2000 in advanced ground station architectures

NASA Astrophysics Data System (ADS)

Chien, Alan T.; Brower, Bernard V.; Rajan, Sreekanth D.

2000-11-01

The integration and management of information from distributed and heterogeneous information producers and providers must be a key foundation of any developing imagery intelligence system. Historically, imagery providers acted as production agencies for imagery, imagery intelligence, and geospatial information. In the future, these imagery producers will be evolving to act more like e-business information brokers. The management of imagery and geospatial information-visible, spectral, infrared (IR), radar, elevation, or other feature and foundation data-is crucial from a quality and content perspective. By 2005, there will be significantly advanced collection systems and a myriad of storage devices. There will also be a number of automated and man-in-the-loop correlation, fusion, and exploitation capabilities. All of these new imagery collection and storage systems will result in a higher volume and greater variety of imagery being disseminated and archived in the future. This paper illustrates the importance-from a collection, storage, exploitation, and dissemination perspective-of the proper selection and implementation of standards-based compression technology for ground station and dissemination/archive networks. It specifically discusses the new compression capabilities featured in JPEG 2000 and how that commercially based technology can provide significant improvements to the overall imagery and geospatial enterprise both from an architectural perspective as well as from a user's prospective.

A Novel Image Compression Algorithm for High Resolution 3D Reconstruction

NASA Astrophysics Data System (ADS)

Siddeq, M. M.; Rodrigues, M. A.

2014-06-01

This research presents a novel algorithm to compress high-resolution images for accurate structured light 3D reconstruction. Structured light images contain a pattern of light and shadows projected on the surface of the object, which are captured by the sensor at very high resolutions. Our algorithm is concerned with compressing such images to a high degree with minimum loss without adversely affecting 3D reconstruction. The Compression Algorithm starts with a single level discrete wavelet transform (DWT) for decomposing an image into four sub-bands. The sub-band LL is transformed by DCT yielding a DC-matrix and an AC-matrix. The Minimize-Matrix-Size Algorithm is used to compress the AC-matrix while a DWT is applied again to the DC-matrix resulting in LL2, HL2, LH2 and HH2 sub-bands. The LL2 sub-band is transformed by DCT, while the Minimize-Matrix-Size Algorithm is applied to the other sub-bands. The proposed algorithm has been tested with images of different sizes within a 3D reconstruction scenario. The algorithm is demonstrated to be more effective than JPEG2000 and JPEG concerning higher compression rates with equivalent perceived quality and the ability to more accurately reconstruct the 3D models.

Impact of JPEG2000 compression on endmember extraction and unmixing of remotely sensed hyperspectral data

NASA Astrophysics Data System (ADS)

Martin, Gabriel; Gonzalez-Ruiz, Vicente; Plaza, Antonio; Ortiz, Juan P.; Garcia, Inmaculada

2010-07-01

Lossy hyperspectral image compression has received considerable interest in recent years due to the extremely high dimensionality of the data. However, the impact of lossy compression on spectral unmixing techniques has not been widely studied. These techniques characterize mixed pixels (resulting from insufficient spatial resolution) in terms of a suitable combination of spectrally pure substances (called endmembers) weighted by their estimated fractional abundances. This paper focuses on the impact of JPEG2000-based lossy compression of hyperspectral images on the quality of the endmembers extracted by different algorithms. The three considered algorithms are the orthogonal subspace projection (OSP), which uses only spatial information, and the automatic morphological endmember extraction (AMEE) and spatial spectral endmember extraction (SSEE), which integrate both spatial and spectral information in the search for endmembers. The impact of compression on the resulting abundance estimation based on the endmembers derived by different methods is also substantiated. Experimental results are conducted using a hyperspectral data set collected by NASA Jet Propulsion Laboratory over the Cuprite mining district in Nevada. The experimental results are quantitatively analyzed using reference information available from U.S. Geological Survey, resulting in recommendations to specialists interested in applying endmember extraction and unmixing algorithms to compressed hyperspectral data.

Reevaluation of JPEG image compression to digitalized gastrointestinal endoscopic color images: a pilot study

NASA Astrophysics Data System (ADS)

Kim, Christopher Y.

1999-05-01

Endoscopic images p lay an important role in describing many gastrointestinal (GI) disorders. The field of radiology has been on the leading edge of creating, archiving and transmitting digital images. With the advent of digital videoendoscopy, endoscopists now have the ability to generate images for storage and transmission. X-rays can be compressed 30-40X without appreciable decline in quality. We reported results of a pilot study using JPEG compression of 24-bit color endoscopic images. For that study, the result indicated that adequate compression ratios vary according to the lesion and that images could be compressed to between 31- and 99-fold smaller than the original size without an appreciable decline in quality. The purpose of this study was to expand upon the methodology of the previous sty with an eye towards application for the WWW, a medium which would expand both clinical and educational purposes of color medical imags. The results indicate that endoscopists are able to tolerate very significant compression of endoscopic images without loss of clinical image quality. This finding suggests that even 1 MB color images can be compressed to well under 30KB, which is considered a maximal tolerable image size for downloading on the WWW.

Quality labeled faces in the wild (QLFW): a database for studying face recognition in real-world environments

NASA Astrophysics Data System (ADS)

Karam, Lina J.; Zhu, Tong

2015-03-01

The varying quality of face images is an important challenge that limits the effectiveness of face recognition technology when applied in real-world applications. Existing face image databases do not consider the effect of distortions that commonly occur in real-world environments. This database (QLFW) represents an initial attempt to provide a set of labeled face images spanning the wide range of quality, from no perceived impairment to strong perceived impairment for face detection and face recognition applications. Types of impairment include JPEG2000 compression, JPEG compression, additive white noise, Gaussian blur and contrast change. Subjective experiments are conducted to assess the perceived visual quality of faces under different levels and types of distortions and also to assess the human recognition performance under the considered distortions. One goal of this work is to enable automated performance evaluation of face recognition technologies in the presence of different types and levels of visual distortions. This will consequently enable the development of face recognition systems that can operate reliably on real-world visual content in the presence of real-world visual distortions. Another goal is to enable the development and assessment of visual quality metrics for face images and for face detection and recognition applications.

Joint reconstruction of multiview compressed images.

PubMed

Thirumalai, Vijayaraghavan; Frossard, Pascal

2013-05-01

Distributed representation of correlated multiview images is an important problem that arises in vision sensor networks. This paper concentrates on the joint reconstruction problem where the distributively compressed images are decoded together in order to take benefit from the image correlation. We consider a scenario where the images captured at different viewpoints are encoded independently using common coding solutions (e.g., JPEG) with a balanced rate distribution among different cameras. A central decoder first estimates the inter-view image correlation from the independently compressed data. The joint reconstruction is then cast as a constrained convex optimization problem that reconstructs total-variation (TV) smooth images, which comply with the estimated correlation model. At the same time, we add constraints that force the reconstructed images to be as close as possible to their compressed versions. We show through experiments that the proposed joint reconstruction scheme outperforms independent reconstruction in terms of image quality, for a given target bit rate. In addition, the decoding performance of our algorithm compares advantageously to state-of-the-art distributed coding schemes based on motion learning and on the DISCOVER algorithm.

The effects of lossy compression on diagnostically relevant seizure information in EEG signals.

PubMed

Higgins, G; McGinley, B; Faul, S; McEvoy, R P; Glavin, M; Marnane, W P; Jones, E

2013-01-01

This paper examines the effects of compression on EEG signals, in the context of automated detection of epileptic seizures. Specifically, it examines the use of lossy compression on EEG signals in order to reduce the amount of data which has to be transmitted or stored, while having as little impact as possible on the information in the signal relevant to diagnosing epileptic seizures. Two popular compression methods, JPEG2000 and SPIHT, were used. A range of compression levels was selected for both algorithms in order to compress the signals with varying degrees of loss. This compression was applied to the database of epileptiform data provided by the University of Freiburg, Germany. The real-time EEG analysis for event detection automated seizure detection system was used in place of a trained clinician for scoring the reconstructed data. Results demonstrate that compression by a factor of up to 120:1 can be achieved, with minimal loss in seizure detection performance as measured by the area under the receiver operating characteristic curve of the seizure detection system.

Radiometric resolution enhancement by lossy compression as compared to truncation followed by lossless compression

NASA Technical Reports Server (NTRS)

Tilton, James C.; Manohar, Mareboyana

1994-01-01

Recent advances in imaging technology make it possible to obtain imagery data of the Earth at high spatial, spectral and radiometric resolutions from Earth orbiting satellites. The rate at which the data is collected from these satellites can far exceed the channel capacity of the data downlink. Reducing the data rate to within the channel capacity can often require painful trade-offs in which certain scientific returns are sacrificed for the sake of others. In this paper we model the radiometric version of this form of lossy compression by dropping a specified number of least significant bits from each data pixel and compressing the remaining bits using an appropriate lossless compression technique. We call this approach 'truncation followed by lossless compression' or TLLC. We compare the TLLC approach with applying a lossy compression technique to the data for reducing the data rate to the channel capacity, and demonstrate that each of three different lossy compression techniques (JPEG/DCT, VQ and Model-Based VQ) give a better effective radiometric resolution than TLLC for a given channel rate.

A Steganographic Embedding Undetectable by JPEG Compatibility Steganalysis

DTIC Science & Technology

2002-01-01

itd.nrl.navy.mil Abstract. Steganography and steganalysis of digital images is a cat- and-mouse game. In recent work, Fridrich, Goljan and Du introduced a method...proposed embedding method. 1 Introduction Steganography and steganalysis of digital images is a cat-and-mouse game. Ever since Kurak and McHugh’s seminal...paper on LSB embeddings in images [10], various researchers have published work on either increasing the payload, im- proving the resistance to

C2 Failures: A Taxonomy and Analysis

DTIC Science & Technology

2013-06-01

2, pp. 171-199. Huber, Reiner, Tor Langsaeter, Petra Eggenhofer, Fernando Freire, Antonio Grilo, Anne-Marie Grisogono, Jose Martine , Jens Roemer... Martin (2012). Mission Command White Paper. Washington, D.C.: U.S. Department of Defense, Office of the Chairman of the Joint Chiefs of Staff. http...e1352384704110.jpeg?w=625&h=389 The Punchline “What we’ve got here, is failure to communicate” Strother Martin as “The Captain,” Cool Hand Luke, (Warner

A seasonal comparison of surface sediment characteristics in Chincoteague Bay, Maryland and Virginia, USA

USGS Publications Warehouse

Ellis, Alisha M.; Marot, Marci E.; Wheaton, Cathryn J.; Bernier, Julie C.; Smith, Christopher G.

2016-02-03

This report is an archive for sedimentological data derived from the surface sediment of Chincoteague Bay. Data are available for the spring (March/April 2014) and fall (October 2014) samples collected. Downloadable data are provided as Excel spreadsheets and as JPEG files. Additional files include ArcGIS shapefiles of the sampling sites, detailed results of sediment grain-size analyses, and formal Federal Geographic Data Committee metadata (data downloads).

Next VLT Instrument Ready for the Astronomers

NASA Astrophysics Data System (ADS)

2000-02-01

FORS2 Commissioning Period Successfully Terminated The commissioning of the FORS2 multi-mode astronomical instrument at KUEYEN , the second FOcal Reducer/low dispersion Spectrograph at the ESO Very Large Telescope, was successfully finished today. This important work - that may be likened with the test driving of a new car model - took place during two periods, from October 22 to November 21, 1999, and January 22 to February 8, 2000. The overall goal was to thoroughly test the functioning of the new instrument, its conformity to specifications and to optimize its operation at the telescope. FORS2 is now ready to be handed over to the astronomers on April 1, 2000. Observing time for a six-month period until October 1 has already been allocated to a large number of research programmes. Two of the images that were obtained with FORS2 during the commissioning period are shown here. An early report about this instrument is available as ESO PR 17/99. The many modes of FORS2 The FORS Commissioning Team carried out a comprehensive test programme for all observing modes. These tests were done with "observation blocks (OBs)" that describe the set-up of the instrument and telescope for each exposure in all details, e.g., position in the sky of the object to be observed, filters, exposure time, etc.. Whenever an OB is "activated" from the control console, the corresponding observation is automatically performed. Additional information about the VLT Data Flow System is available in ESO PR 10/99. The FORS2 observing modes include direct imaging, long-slit and multi-object spectroscopy, exactly as in its twin, FORS1 at ANTU . In addition, FORS2 contains the "Mask Exchange Unit" , a motorized magazine that holds 10 masks made of thin metal plates into which the slits are cut by means of a laser. The advantage of this particular observing method is that more spectra (of more objects) can be taken with a single exposure (up to approximately 80) and that the shape of the slits can be adapted to the shape of the objects, thus increasing the scientific return. Results obtained so far look very promising. To increase further the scientific power of the FORS2 instrument in the spectroscopic mode, a number of new optical dispersion elements ("grisms", i.e., a combination of a grating and a glass prism) have been added. They give the scientists a greater choice of spectral resolution and wavelength range. Another mode that is new to FORS2 is the high time resolution mode. It was demonstrated with the Crab pulsar, cf. ESO PR 17/99 and promises very interesting scientific returns. Images from the FORS2 Commissioning Phase The two composite images shown below were obtained during the FORS2 commissioning work. They are based on three exposures through different optical broadband filtres (B: 429 nm central wavelength; 88 nm FWHM (Full Width at Half Maximum), V: 554/111 nm, R: 655/165 nm). All were taken with the 2048 x 2048 pixel 2 CCD detector with a field of view of 6.8 x 6.8 arcmin 2 ; each pixel measures 24 µm square. They were flatfield corrected and bias subtracted, scaled in intensity and some cosmetic cleaning was performed, e.g. removal of bad columns on the CCD. North is up and East is left. Tarantula Nebula in the Large Magellanic Cloud ESO Press Photo 05a/00 ESO Press Photo 05a/00 [Preview; JPEG: 400 x 452; 52k] [Normal; JPEG: 800 x 903; 142k] [Full-Res; JPEG: 2048 x 2311; 2.0Mb] The Tarantula Nebula in the Large Magellanic Cloud , as obtained with FORS2 at KUEYEN during the recent Commissioning period. It was taken during the night of January 31 - February 1, 2000. It is a composite of three exposures in B (30 sec exposure, image quality 0.75 arcsec; here rendered in blue colour), V (15 sec, 0.70 arcsec; green) and R (10 sec, 0.60 arcsec; red). The full-resolution version of this photo retains the orginal pixels. 30 Doradus , also known as the Tarantula Nebula , or NGC 2070 , is located in the Large Magellanic Cloud (LMC) , some 170,000 light-years away. It is one of the largest known star-forming regions in the Local Group of Galaxies. It was first catalogued as a star, but then recognized to be a nebula by the French astronomer A. Lacaille in 1751-52. The Tarantula Nebula is the only extra-galactic nebula which can be seen with the unaided eye. It contains in the centre the open stellar cluster R 136 with many of the largest, hottest, and most massive stars known. Radio Galaxy Centaurus A ESO Press Photo 05b/00 ESO Press Photo 05b/00 [Preview; JPEG: 400 x 448; 40k] [Normal; JPEG: 800 x 896; 110k] [Full-Res; JPEG: 2048 x 2293; 2.0Mb] The radio galaxy Centarus A , as obtained with FORS2 at KUEYEN during the recent Commissioning period. It was taken during the night of January 31 - February 1, 2000. It is a composite of three exposures in B (300 sec exposure, image quality 0.60 arcsec; here rendered in blue colour), V (240 sec, 0.60 arcsec; green) and R (240 sec, 0.55 arcsec; red). The full-resolution version of this photo retains the orginal pixels. ESO Press Photo 05c/00 ESO Press Photo 05c/00 [Preview; JPEG: 400 x 446; 52k] [Normal; JPEG: 801 x 894; 112k] An area, north-west of the centre of Centaurus A with a detailed view of the dust lane and clusters of luminous blue stars. The normal version of this photo retains the orginal pixels. The new FORS2 image of Centaurus A , also known as NGC 5128 , is an example of how frontier science can be combined with esthetic aspects. This galaxy is a most interesting object for the present attempts to understand active galaxies . It is being investigated by means of observations in all spectral regions, from radio via infrared and optical wavelengths to X- and gamma-rays. It is one of the most extensively studied objects in the southern sky. FORS2 , with its large field-of-view and excellent optical resolution, makes it possible to study the global context of the active region in Centaurus A in great detail. Note for instance the great number of massive and luminous blue stars that are well resolved individually, in the upper right and lower left in PR Photo 05b/00 . Centaurus A is one of the foremost examples of a radio-loud active galactic nucleus (AGN) . On images obtained at optical wavelengths, thick dust layers almost completely obscure the galaxy's centre. This structure was first reported by Sir John Herschel in 1847. Until 1949, NGC 5128 was thought to be a strange object in the Milky Way, but it was then identified as a powerful radio galaxy and designated Centaurus A . The distance is about 10-13 million light-years (3-4 Mpc) and the apparent visual magnitude is about 8, or 5 times too faint to be seen with the unaided eye. There is strong evidence that Centaurus A is a merger of an elliptical with a spiral galaxy, since elliptical galaxies would not have had enough dust and gas to form the young, blue stars seen along the edges of the dust lane. The core of Centaurus A is the smallest known extragalactic radio source, only 10 light-days across. A jet of high energy particles from this centre is observed in radio and X-ray images. The core probably contains a supermassive black hole with a mass of about 100 million solar masses. This is the caption to ESO PR Photos 05a-c/00 . They may be reproduced, if credit is given to the European Southern Observatory..

TreeRipper web application: towards a fully automated optical tree recognition software.

PubMed

Hughes, Joseph

2011-05-20

Relationships between species, genes and genomes have been printed as trees for over a century. Whilst this may have been the best format for exchanging and sharing phylogenetic hypotheses during the 20th century, the worldwide web now provides faster and automated ways of transferring and sharing phylogenetic knowledge. However, novel software is needed to defrost these published phylogenies for the 21st century. TreeRipper is a simple website for the fully-automated recognition of multifurcating phylogenetic trees (http://linnaeus.zoology.gla.ac.uk/~jhughes/treeripper/). The program accepts a range of input image formats (PNG, JPG/JPEG or GIF). The underlying command line c++ program follows a number of cleaning steps to detect lines, remove node labels, patch-up broken lines and corners and detect line edges. The edge contour is then determined to detect the branch length, tip label positions and the topology of the tree. Optical Character Recognition (OCR) is used to convert the tip labels into text with the freely available tesseract-ocr software. 32% of images meeting the prerequisites for TreeRipper were successfully recognised, the largest tree had 115 leaves. Despite the diversity of ways phylogenies have been illustrated making the design of a fully automated tree recognition software difficult, TreeRipper is a step towards automating the digitization of past phylogenies. We also provide a dataset of 100 tree images and associated tree files for training and/or benchmarking future software. TreeRipper is an open source project licensed under the GNU General Public Licence v3.

HUBBLE SPIES GLOBULAR CLUSTER IN NEIGHBORING GALAXY

NASA Technical Reports Server (NTRS)

2002-01-01

Hubble Space Telescope has captured a view of a globular cluster called G1, a large, bright ball of light in the center of the photograph consisting of at least 300,000 old stars. G1, also known as Mayall II, orbits the Andromeda galaxy (M31), the nearest major spiral galaxy to our Milky Way. Located 130,000 light-years from Andromeda's nucleus, G1 is the brightest globular cluster in the Local Group of galaxies. The Local Group consists of about 20 nearby galaxies, including the Milky Way. The crisp image is comparable to ground-based telescope views of similar clusters orbiting the Milky Way. The Andromeda cluster, however, is nearly 100 times farther away. A glimpse into the cluster's finer details allow astronomers to see its fainter helium-burning stars whose temperatures and brightnesses show that this cluster in Andromeda and the oldest Milky Way clusters have approximately the same age. These clusters probably were formed shortly after the beginning of the universe, providing astronomers with a record of the earliest era of galaxy formation. During the next two years, astronomers will use Hubble to study about 20 more globular clusters in Andromeda. The color picture was assembled from separate images taken in visible and near-infrared wavelengths taken in July of 1994. CREDIT: Michael Rich, Kenneth Mighell, and James D. Neill (Columbia University), and Wendy Freedman (Carnegie Observatories), and NASA Image files in GIF and JPEG format and captions may be accessed on Internet via anonymous ftp from oposite.stsci.edu in /pubinfo.

Automated Selection of Hotspots (ASH): enhanced automated segmentation and adaptive step finding for Ki67 hotspot detection in adrenal cortical cancer.

PubMed

Lu, Hao; Papathomas, Thomas G; van Zessen, David; Palli, Ivo; de Krijger, Ronald R; van der Spek, Peter J; Dinjens, Winand N M; Stubbs, Andrew P

2014-11-25

In prognosis and therapeutics of adrenal cortical carcinoma (ACC), the selection of the most active areas in proliferative rate (hotspots) within a slide and objective quantification of immunohistochemical Ki67 Labelling Index (LI) are of critical importance. In addition to intratumoral heterogeneity in proliferative rate i.e. levels of Ki67 expression within a given ACC, lack of uniformity and reproducibility in the method of quantification of Ki67 LI may confound an accurate assessment of Ki67 LI. We have implemented an open source toolset, Automated Selection of Hotspots (ASH), for automated hotspot detection and quantification of Ki67 LI. ASH utilizes NanoZoomer Digital Pathology Image (NDPI) splitter to convert the specific NDPI format digital slide scanned from the Hamamatsu instrument into a conventional tiff or jpeg format image for automated segmentation and adaptive step finding hotspots detection algorithm. Quantitative hotspot ranking is provided by the functionality from the open source application ImmunoRatio as part of the ASH protocol. The output is a ranked set of hotspots with concomitant quantitative values based on whole slide ranking. We have implemented an open source automated detection quantitative ranking of hotspots to support histopathologists in selecting the 'hottest' hotspot areas in adrenocortical carcinoma. To provide wider community easy access to ASH we implemented a Galaxy virtual machine (VM) of ASH which is available from http://bioinformatics.erasmusmc.nl/wiki/Automated_Selection_of_Hotspots . The virtual slide(s) for this article can be found here: http://www.diagnosticpathology.diagnomx.eu/vs/13000_2014_216.

Discovery of Molecular Gas Shells around the Unusual Galaxy Centaurus A

NASA Astrophysics Data System (ADS)

2000-03-01

Recent observations by an international team of astronomers [1] with the 15-metre Swedish-ESO Submillimetre Telescope at the La Silla observatory (Chile) have shown that the unusual, nearby galaxy Centaurus A is surrounded by shells in which carbon monoxide molecules are present. These new exciting results are the first of their kind. In addition to the intrinsic scientific value of this discovery, it also provides an instructive example of what will become possible for more distant galaxies with the projected Atacama Large Millimeter Array (ALMA) , now in the planning phase. Ellipticals and spirals Galaxies come in different shapes. Some of these take the form of more or less perfect spirals, some have the form of ellipsoids and still others have an irregular appearance. One of the major differences between elliptical and spiral galaxies is that the former do not possess extensive gaseous discs in which young stars can be formed. This is despite the fact that most elliptical galaxies are probably formed by the merger of two or more spiral galaxies. However, during such a process most of the gas in the spirals is either quickly turned into stars by massive bursts of star formation or is completely lost into the surrounding space. Shells around elliptical galaxies Most galaxies are members of groups. Once they have been formed, massive elliptical galaxies in these often behave like "cannibals" by swallowing one or more smaller companion galaxies. Some vestiges of such an event may remain visible for a certain time after the merger, normally in the form of weak structures in the otherwise smooth light distribution over the elliptical galaxy. These structures resemble the ripples or waves that develop on the water surface when you throw a small stone into a calm pond. While long-exposure photos show them as faint "rings" around the galaxy, they are in fact the projected images of three-dimensional structures and are often referred to as shells . By means of photometric and spectrographic studies of their light, it has been known since the early 1980's that such shells are made up of stars. It appears that they are quite common - about half of the nearby large elliptical galaxies have been found to be surrounded by stellar shells. More recently, in 1994, atomic hydrogen gas was discovered to be associated with some of the stellar shells. This discovery was a bit of a surprise, because the current theory predicts that when two galaxies merge, their gas and stars will behave very differently. While the individual stars hardly ever hit each other, the interstellar gas clouds collide violently. They will lose all their energy and the gas will fall towards the common centre where it is soon consumed in vigorous bursts of star formation. Why would there then be hydrogen gas in the outer shells of some elliptical galaxies? A possible origin of gaseous shells The astronomer team, headed by Vassilis Charmandaris [1] decided to look into this serious discrepancy between theory and observations. They believed that a possible explanation might be that this diffuse atomic gas is located, not in vast, very dilute clouds, but rather in smaller, much denser molecular clouds , such as these are known in our own galaxy, the Milky Way. Due to their relative compactness (more than 1000 molecules/cm 3 , i.e,. at least 100 times more than that of larger diffuse clouds), molecular clouds would behave more like the stars during the galaxy collision event. Indeed, realistic calculations showed that the dynamical behavior of such dense clouds would be intermediate between the stars and the diffuse hydrogen gas. Thus, while most of the gas would still end up in the centre of the remaining galaxy after a merger, a larger fraction of it would be able to survive at large distances from the nucleus. This would then be the origin of the observed hydrogen shells. During the merger, gas that originates from regions in the outskirts of the "cannibalized" galaxy - and farther out than most of the stars - would be liberated earlier than the stars. As a consequence, one would also expect to observe a certain displacement between the gaseous and stellar shells. The SEST observations ESO PR Photo 08a/00 ESO PR Photo 08a/00 [Preview - JPEG: 343 x 400 pix - 188k] [Normal - JPEG: 686 x 800 pix - 560k] [High-Res - JPEG: 2571 x 3000 pix - 4.4M] Caption : ESO PR Photo 08a/00 shows an optical image of the galaxy Centaurus A (from the 1-m ESO Schmidt telescope at La Silla), with the surrounding shells outlined as contours. The image has been enhanced to show the full extent of the galaxy; due to this process, the central dust band is less visible. The stellar shells (see the text) are indicated in yellow; they are otherwise only visible on very deep images. The contours of the observed distribution of atomic hydrogen gas are white. The radio jet from the active centre of Centaurus A is shown in blue. The new SEST observations prove the existence of carbon monoxide (CO) in the S1 and S2 shells (indicated in red). The field measures approx. 32 x 32 arcmin 2. North is up and East is left. A detailed photo of Centaurus A was recently obtained with the FORS2 instrument at VLT KUEYEN, cf. ESO PR Photo 05b/00 ESO PR Photo 08b/00 ESO PR Photo 08b/00 [Preview - JPEG: 247 x 400 pix - 60k] [Normal - JPEG: 493 x 800 pix - 128k] [High-Res - JPEG: 3000 x 1847 pix - 756k] Caption : ESO PR Photo 08b/00 shows the observed CO emission spectra in the S1 and S2 shells. In both cases, two lines from different molecular states were observed that stand out clearly from the sky noise. The abscissa indicates the velocity (i.e., the radio frequency) and the ordinate the temperature (i.e., the intensity). These diagrammes represent approx. 20 and 30 hours of observation, respectively. In order to test this hypothesis, the astronomers decided to look for the possible presence in the shells around some nearby elliptical galaxies of specific gases that are typical of molecular clouds . The observations were carried out with the 15-metre Swedish-ESO Submillimetre Telescope (SEST) at the ESO La Silla Observatory (Chile). This telescope is the only one of its kind in the southern hemisphere and is particularly suited to register emissions from gases that are common in molecular clouds, e.g. those of carbon monoxide (CO) near a wavelength of 3 mm . This search was successful, notably in the case of Centaurus A , a nearby giant elliptical galaxy with strong radio emission and an active nucleus (AGN), cf. ESO PR Photos 05b-c/00. For the first time, carbon monoxide molecules (CO) were found to be present in two of the surrounding shells, cf. PR Photo 08a/00 . These shells are located at a distance of about 50,000 light-years (15 kpc) from the nucleus of the galaxy and, as can be seen on the photo, the regions of the observed molecules appear to be aligned with the radio jet. This important discovery supports the above mentioned hypothesis and thus provides an important clue as to why there can be gas very far from the centre of an elliptical galaxy after a collision/merger. It is therefore likely that a certain fraction of the gas in the "cannibalized" companion galaxy is made up by small and dense molecular clouds. During the collision, they behave similarly to the stars and end up by forming gaseous shells. The fate of the gas in the shells What is then the likely fate of these gaseous shells? They are most certainly gravitationally well bound to the Centaurus A galaxy and cannot escape into the surrounding intergalactic space. But while the thin and diffuse hydrogen gas will probably move towards the galaxy centre fairly quickly, the more clumpy clouds and the molecular gas therein may remain in the outer shells during long periods. Over time though, also this gas will become less prominent, as the clouds slowly disperse. Interesting perspectives The discovery of carbon monoxide in the shells around Centaurus A opens very interesting avenues for future research on the evolution of galaxies. However, observations like these are very challenging. First of all, as there are comparatively small quantities of gas in most galaxy shells, such measurements require large radio telescopes with high-sensitivity receivers, as well as many hours of observation before sufficiently accurate results (i.e., signal-to-noise ratio) are obtained. In the present case, no less than 20 hours were needed to achieve the secure detection of the emission from CO molecules, as displayed in PR Photo 08b/00 . Moreover, the angular resolution on the sky of the single 15-metre SEST dish is only about 44 arcsec (at the wavelengths of the observed CO lines around 3 mm). This makes it virtually impossible to obtain a clear view of the individual shells in distant galaxies with this telescope. On the other hand, in nearby targets such as Centaurus A, the shells extend over a comparatively large sky area and thus require large-scale mapping, a very time-consuming project. The role of ALMA However, exciting possibilities for more detailed studies, also of much more distant galaxies, are opening with the future Atacama Large Millimeter Array (ALMA) . The collecting area of ALMA is about 7000 m 2 , or over 40 times larger than that of SEST. It will also achieve sub-arcsecond angular resolution when its 64 antennas are combined in the interferometric mode. Together, these properties of ALMA will allow much more sensitive and detailed observations of galaxies at larger distances. When compared to earlier observations of CO near the centre of Centaurus A, the present SEST data show that about 10% of the molecular gas is far outside the centre of this galaxy. As a next step, it would be interesting to examine whether this is also true in other elliptical galaxies with gaseous shells. And will it be possible to detect other molecules in these shells? There will certainly be no lack of opportunities for exciting research in this field, especially with the advent of ALMA , some years from now. More information about this project A research article about this project will appear in the European journal Astronomy & Astrophysics (Vol. 356); it is now available on the web at astro-ph/0003175. Note [1] The team consists of Vassilis Charmandaris (DEMIRM, Observatoire de Paris, France and Cornell University, USA), Françoise Combes (DEMIRM, Observatoire de Paris, France) and Thijs van der Hulst (Kapteyn Institute, University of Groningen, The Netherlands). This work was supported by the European Union via a Marie-Curie fellowship. Contact Dr. Vassilis Charmandaris , Cornell University, Astronomy Department, 106 Space Sciences Bldg., Ithaca, NY 14853, USA. Tel.: +1 (607) 255-8774; e-mail: vassilis@astro.cornell.edu ESO PR Photos may be reproduced, if credit is given to the European Southern Observatory.

Dancing around the Black Hole

NASA Astrophysics Data System (ADS)

2001-08-01

ISAAC Finds "Cool" Young Stellar Systems at the Centres of Active Galaxies Summary Supermassive Black Holes are present at the centres of many galaxies, some weighing hundreds of millions times more than the Sun. These extremely dense objects cannot be observed directly, but violently moving gas clouds and stars in their strong gravitational fields are responsible for the emission of energetic radiation from such "active galaxy nuclei" (AGN) . A heavy Black Hole feeds agressively on its surroundings . When the neighbouring gas and stars finally spiral into the Black Hole, a substantial fraction of the infalling mass is transformed into pure energy. However, it is not yet well understood how, long before this dramatic event takes place, all that material is moved from the outer regions of the galaxy towards the central region. So how is the food for the central Black Hole delivered to the table in the first place? To cast more light on this central question, a team of French and Swiss astronomers [1] has carried out a series of trailblazing observations with the VLT Infrared Spectrometer And Array Camera (ISAAC) on the VLT 8.2-m ANTU telescope at the ESO Paranal Observatory. The ISAAC instrument is particularly well suited to this type of observations. Visible light cannot penetrate the thick clouds of dust and gas in the innermost regions of active galaxies, but by recording the infrared light from the stars close to the Black Hole , their motions can be studied. By charting those motions in the central regions of three active galaxies (NGC 1097, NGC 1808 and NGC 5728), the astronomers were able to confirm the presence of "nuclear bars" in all three. These are dynamical structures that "open a road" for the flow of material towards the innermost region. Moreover, the team was surprised to discover signs of a young stellar population near the centres of these galaxies - stars that have apparently formed quite recently in a central gas disk. Such a system is unstable, however, and will soon disrupt. At some moment, many of those young stars may get too close to the monster in the centre and suffer an unhappy fate... PR Photo 25a/01 : The active galaxy NGC 1097 (R-band image) PR Photo 25b/01 : The active galaxy NGC 1808 (H-band image) PR Photo 25c/01 : The active galaxy NGC 5728 (K-band image) PR Photo 25d/01 : Schematic drawing of the various structural components mentioned in the text. PR Photo 25e/01 : ISAAC spectrum (2.3 µm) of the central region of NGC 1808 PR Photo 25f/01 : Stellar motions at the centre of NGC 1808 Central black holes in galaxies ESO PR Photo 25a/01 ESO PR Photo 25a/01 [Preview - JPEG: 400 x 489 pix - 39k] [Normal - JPEG: 800 x 977 pix - 296k] ESO PR Photo 25b/01 ESO PR Photo 25b/01 [Preview - JPEG: 400 x 499 pix - 40k] [Normal - JPEG: 800 x 997 pix - 168k] ESO PR Photo 25c/01 ESO PR Photo 25c/01 [Preview - JPEG: 400 x 488 pix - 47k] [Normal - JPEG: 800 x 975 pix - 384k] Caption : Photos of three active galaxies that were observed with ISAAC during the present programme. They show NGC 1097 (R-band; Photo 25a/01) and the central areas of NGC 1808 (H-band; Photo 25b/01) and NGC 5728 (K-band; Photo 25c/01). The bar-like structures and the luminous centres where the Black Holes are located are well visible - they are discussed in the text. The distances to these galaxies are approximately 55, 35 and 120 million light-years, respectively; the local scales are indicated in the photos. Technical information about these photos is available below. Recent research with space- and ground-based astronomical telescopes indicate that there are very heavy Black Holes at the centres of most galaxies. There is also general agreement among scientists that many of the closest neighbours of our own Milky Way Galaxy, for example the large spiral Andromeda Galaxy and the peculiar Centaurus A galaxy (cf. ESO PR 04/01 ), do contain central black holes with masses from millions to billions of solar masses [2]. Black Holes have an extremely intense gravitational field and as light can not escape from them, they are dark and invisible. Indeed, with presently available observational tools, they cannot be detected directly, only by effects resulting from interaction with their immediate surroundings. A small fraction of the black holes in galaxies are thus revealed by the spectacular activity they trigger in the central part of their hosts. Attracted by that heavy object, enormous quantities of gas (mostly hydrogen) spiral inwards towards the black hole. A disk-shaped structure forms in which the gas moves ever faster around the black hole while enormous amounts of energy are radiated at all wavelengths [3]. Getting the food to the Black Hole A great debate is now going on among scientists about how exactly the black holes are "fed". How is the gas first transported into the disk to fuel the seemingly insatiable supermassive black hole? It is still not well understood how the gas is moved from the outside to within a distance of 1000 light-years of the centre. Various violent processes have been mentioned in this context, like the merger of galaxies. A fine example of such an event was recently observed at the distant quasar HE 1013-2136 with the ESO Very Large Telescope, cf. ESO PR 13/01. The role of "nuclear bars" ESO PR Photo 25d/01 ESO PR Photo 25d/01 [Preview - JPEG: 364 x 400 pix - 89k] [Normal - JPEG: 727 x 800 pix - 264k] Caption : PR Photo 25d/01 is a schematic drawing of the various components of a double-barred galaxy, as mentioned in the text. Another possibility to move the gas inwards is the presence of bar-like structures at the centres of some galaxies, so-called "nuclear bars" . They look like small versions of the well-known, beautiful large-scale bar-like structures seen in galaxies like NGC 1365 (cf. ESO PR Photos 08a-e/99 ), but the responsible dynamical processes may possibly be somewhat different. Photo 25d/01 shows the various components that are discussed here in a schematic way. Acting as a gravitational brush, a bar that is thousands of light-years long efficiently "sweeps" the gas in that galaxy towards its core. When sufficient material has collected there, that matter may become dynamically "decoupled", forming a smaller bar at the centre of the larger "primary" bar. Such a "nuclear bar" may then, at least in theory, take over and let the gas move further inwards towards the central black hole. Until now, nuclear bars have mostly been seen on detailed images as small, elongated structures embedded within the larger primary bars - such structures may ressemble a "Russian doll". In addition, nuclear bars have been detected indirectly due to their gravitational effects, by means of very accurate measurements of the motions of the gas in the central region in a few galaxies. A first observational campaign by a team of French and Swiss astronomers [1] with the ESO Very Large Telescope (VLT) has now brought new, important insights about these nuclear bars. ISAAC spectra of the innermost regions of three active galaxies ESO PR Photo 25e/01 ESO PR Photo 25e/01 [Preview - JPEG: 400 x 424 pix - 40k] [Normal - JPEG: 800 x 847 pix - 256k] ESO PR Photo 25f/01 ESO PR Photo 25f/01 [Preview - JPEG: 400 x 241 pix - 40k] [Normal - JPEG: 800 x 401 pix - 112k] Caption : PR Photo 25e/01 is a reproduction of a long-slit ISAAC spectrum of the central region of the active galaxy NGC 1808 . It is in the 2.3 µm spectral region and the wavelength increases towards right. Several strong, vertical bands are seen; they are caused by CO-molecules in the atmospheres of the stars in this area. The bright band at the centre corresponds to the nucleus of the galaxy within which the central black hole is located. The characteristic S-shape is a result of the rotation of the stars around this centre, due to the Doppler effect. Technical information about this photo is available below. In the left half of PR Photo 25f/01 , the measured velocities (ordinate) of the stars near the centre of NGC 1808 are plotted at different distances from the nucleus (abscissa). The right half shows the corresponding curve after "removal" of the effect from the rotation - the remaining spread is a direct measure of the "velocity dispersion" and the individual stellar motions. As can be clearly seen, the width of the "band" decreases towards the centre, indicating the presence of a "dynamically cool" central stellar system. For more details, see the text. The scientists embarked upon a project with the goal of investigating in detail the motions of stars in the central regions of some active, comparatively "nearby" galaxies. As the innermost regions of such galaxies are usually quite dusty, the observations were carried out in infrared light that penetrates the dust clouds much better than does visible light. Thanks to its high efficiency and excellent imaging quality and spectral resolution, the VLT Infrared Spectrometer And Array Camera (ISAAC) is superbly suited for such work. Several galaxies with active centres were selected for the first observing runs in 1999 and 2000, among these NGC 1097, NGC 1808 and NGC 5728 that are shown in PR Photos 25a-c/01 . Infrared spectra were obtained in the 2.3 µm wavelength region in which a number of molecular spectral bands are seen, cf. PR Photo 25e/01 . They are caused by carbon monoxide ( 12 CO) molecules in the atmospheres of the stars located near the centres of the galaxies. Stellar motions By measuring the exact wavelengths of these molecular bands, it is possible to determine (from the Doppler effect), first, the mean velocity of the stars ( PR Photo 25f/01 ; left) and, secondly, the spread in this velocity (known as the "velocity dispersion" ; right). The first value reflects the general speed with which the stars move around the central black hole. The second indicates the extent to which the individual stellar motions deviate from that mean value. The comparison with the flight of a swarm of bees is useful: the mean velocity tells how fast the swarm moves forward as a whole - this is the ordered motion of the group. The second value instead indicates how much (or how fast) the individual bees move around inside the swarm - this is the spread in random velocities among the bees. Dynamical temperature is another concept defined by velocity dispersion. A warm gas is a gas where the molecules swarm around at high random speeds, while the molecules in a cold gas have low velocity dispersion. Astronomers often borrow this terminology and refer to stellar systems with low velocity dispersions as "dynamically cool systems". Confirming the "nuclear bars"... When "mapped" over the entire central area of a galaxy, these stellar velocity values provide detailed information about the gravitational field, and thus the mass distribution in the innermost region of the galaxy. The ISAAC observations did confirm the presence of "nuclear bars" in NGC 1097, NGC 1808 and NGC 5728. They also showed that these bars are truly "decoupled" stellar systems - their motions are only determined by the mass distribution in that area. ...and discovering a "dynamically cool" stellar system! However, the astronomers were very surprised to discover that in all three galaxies, the velocity dispersion is decreasing towards the centre, exactly contrary to what is predicted by simple models . The likely reason is the presence in the central region of a "newborn" system of stars whose individual velocities have not yet had time to "heat up". The project leader, Eric Emsellem explains: "Slower individual stellar motions correspond to a lower 'dynamical temperature' of the stellar system in this innermost region. We interpret this as evidence for a recent infall of gas that was induced by the nuclear bar. This has created a new gaseous disk at the centre of the galaxy, which has given birth to new stars. They all move around the black hole with more or less the same circular velocity as the gas from which they were born" . Agreement between observations and models This interesting scenario is supported by recent, extensive model computations by the team. In these computer models, large numbers of "stars" (mass points) move in a model galaxy with both a large and a nuclear bar, as observed in the three galaxies. Herve Wozniak refers to them as "self-consistent N-body simulations" and explains why the team is enthusiastic: "When our models also include star formation in the gas in the central region, a new, "dynamically cool" component of young stars emerges and mixes with the old stellar population" . He goes on: "The light from those young stars is superposed on that from the older ones in that area. Because of this, the overall "velocity dispersion" in the central region is then smaller than what it is further out. This is exactly as we observed in the ISAAC spectra obtained in the present programme" . Eric Emsellem points out that such a "dynamically cold" system is unstable and cannot last very long . "Soon it will "heat up" due to complex dynamical processes. It is quite possible that some of these stars will eventually end up as food for the hungry Black Hole.." Prospects With these new high-resolution infrared observations of the structure and the objects in the innermost regions of active galaxies, ISAAC and the VLT are paving the way for future studies of the processes that take place in the immediate neighbourhood of the central black holes. More active galaxies will now be observed with this method and it will be interesting to see if the presently discovered "cool" and young stellar systems represent a common phenomenon or not. More information The first stages of the research project reported in this Press Release are described in a scientific article ("Dynamics of embedded bars and the connection with AGN" by E. Emsellem et al.) that appeared in the European research journal Astronomy & Astrophysics (Vol. 368, p. 52). Two other articles about the new models and the implied properties of the central stellar population of young stars will follow. Notes [1]: The team consists of Eric Emsellem (Principal Investigator, Centre de Recherche Astronomique de Lyon, France), Didier Greusard and Daniel Friedli (Geneva Observatory, Switzerland), Francoise Combes (DEMIRM, Paris, France), Herve Wozniak (Marseille Observatory, France), Emmanuel Pecontal (Centre de Recherche Astronomique de Lyon, France) and Stephane Leon (University of Cologne, Germany). [2]: Black Holes represent an extreme physical phenomenon; if the Earth were to become one, it would measure no more than a few millimetres across. The gravitational field around a black hole is so intense that even light can not escape from it. [3]: On its most energetic and dramatic scale, this scenario results in a quasar , a type of object first discovered in 1963. In this case, the highly energetic centre of a galaxy completely outshines the outer structures and the "quasi-stellar object" appears star-like in smaller telescopes. Technical information about the photos PR Photo 25a/01 with NGC 1097 is a reproduction from the ESO LV archive, extracted via the Hypercat facility. It is based on a 2-hour photographic exposure in the R-band (Kodak IIIa-F emulsion + RG630 filtre) with the ESO 1-m Schmidt Telescope at La Silla and covers a field of about 35 x 35 arcmin 2. On this and the following photos, North is up and East is left. PR Photo 25b/01 of the central region of NGC 1808 was reproduced from an H-band (1.6 µm) image obtained with the IRAC2 camera (now decommissioned) at the MPG/ESO 2.2-m telescope on La Silla. The exposure time was 50 sec and the field measures 2.0 x 2.1 arcmin 2 (original pixel size = 0.52 arcsec). PR Photo 25c/01 of the central region of NGC 5728 was obtained at the 3.5-m Canada-France-Hawaii Telescope (CFHT) and the Adaptive-Optics PUEO instrument; the K-band (2.3 µm) exposure lasted 60 sec and the field measures 38 X 38 arcsec 2. PR Photo 25e/01 shows a raw, long-slit IR-spectrum in the 2.3 µm wavelength region, obtained with ISAAC along the major axis of this galaxy.

Rebuilding Spiral Galaxies

NASA Astrophysics Data System (ADS)

2005-01-01

Major Observing Programme Leads to New Theory of Galaxy Formation Summary Most present-day large galaxies are spirals, presenting a disc surrounding a central bulge. Famous examples are our own Milky Way or the Andromeda Galaxy. When and how did these spiral galaxies form? Why do a great majority of them present a massive central bulge? An international team of astronomers [1] presents new convincing answers to these fundamental questions. For this, they rely on an extensive dataset of observations of galaxies taken with several space- and ground-based telescopes. In particular, they used over a two-year period, several instruments on ESO's Very Large Telescope. Among others, their observations reveal that roughly half of the present-day stars were formed in the period between 8,000 million and 4,000 million years ago, mostly in episodic burst of intense star formation occurring in Luminous Infrared Galaxies. From this and other evidence, the astronomers devised an innovative scenario, dubbed the "spiral rebuilding". They claim that most present-day spiral galaxies are the results of one or several merger events. If confirmed, this new scenario could revolutionise the way astronomers think galaxies formed. PR Photo 02a/05: Luminosity - Oxygen Abundance Relation for Galaxies (VLT) PR Photo 02b/05: The Spiral Rebuilding Scenario A fleet of instruments How and when did galaxies form? How and when did stars form in these island universes? These questions are still posing a considerable challenge to present-day astronomers. Front-line observational results obtained with a fleet of ground- and space-based telescopes by an international team of astronomers [1] provide new insights into these fundamental issues. For this, they embarked on an ambitious long-term study at various wavelengths of 195 galaxies with a redshift [2] greater than 0.4, i.e. located more than 4000 million light-years away. These galaxies were studied using ESO's Very Large Telescope, as well as the NASA/ESA Hubble Space Telescope, the ESA Infrared Space Observatory (ISO) satellite and the NRAO Very Large Array. With the Very Large Telescope, observations were performed on Antu and Kueyen over a two-year period using the quasi-twin instruments FORS1 and FORS2 in the visible and ISAAC in the infrared. In both cases, it was essential to rely on the unique capabilities of the VLT to obtain high-quality spectra with the required resolution. A fleet of results ESO PR Photo 02a/05 ESO PR Photo 02a/05 Luminosity - Oxygen Abundance Relation for Galaxies [Preview - JPEG: 400 x 455 pix - 81k] [Normal - JPEG: 800 x 910 pix - 208k] Caption: ESO PR Photo 02a/05 shows the oxygen abundance (expressed in fraction of the solar value) as a function of the luminosity of the galaxies (in logarithm scale). This relation is fundamental in astrophysics. The relation for local galaxies is shown by the solid red line. The blue dots are the values derived from VLT spectra in a subset of the studied galaxies. They reveal for the first time that this relation is changing with time: for a given value of the luminosity, galaxies of different ages present different values of the oxygen abundance. From their extensive set of data, the astronomers could draw a number of important conclusions. First, based on the near-infrared luminosities of the galaxies, they infer that most of the galaxies they studied contain between 30,000 million and 300,000 million times the mass of the Sun in the form of stars. This is roughly a factor 0.2 to 2 the amount of mass locked in stars in our own Milky Way. Second, they discovered that contrary to the local Universe where so-called Luminous Infrared Galaxies (LIRGs; [3]) are very rare objects, at a redshift from 0.4 to 1, that is, 4,000 to 8,000 million years ago, roughly one sixth of bright galaxies were LIRGs. Because this peculiar class of galaxies is believed to be going through a very active phase of star formation, with a doubling of the stellar mass occurring in less than 1,000 million years, the existence of such a large fraction of these LIRGs in the past Universe has important consequences on the total stellar formation rate. As François Hammer (Paris Observatory, France), leader of the team, states: "We are thus led to the conclusion that during the time span from roughly 8,000 million to 4,000 million years ago, intermediate mass galaxies converted about half of their total mass into stars. Moreover, this star formation must have taken place in very intense bursts when galaxies were emitting huge amount of infrared radiation and appeared as LIRGs." Another result could be secured using the spectra obtained with the Very Large Telescope: the astronomers measured the chemical abundances in several of the observed galaxies (PR Photo 02a/05). They find that galaxies with large redshifts show oxygen abundances two times lower than present-day spirals. As it is stars which produce oxygen in a galaxy, this again gives support to the fact that these galaxies have been actively forming stars in the period between 8,000 and 4,000 million years ago. And because it is believed that galaxy collisions and mergers play an important role in triggering such phases of enhanced star-forming activity, these observations indicate that galaxy merging still occurred frequently less than 8,000 million years ago. Spiral Rebuilding ESO PR Photo 02b/05 ESO PR Photo 02b/05 The Spiral Rebuilding Scenario [Preview - JPEG: 471 x 400 pix - 80k] [Normal - JPEG: 941 x 800 pix - 207k] Caption: ESO PR Photo 02b/05: Schematic representation of the newly proposed scenario of "spiral galaxy rebuilding": galaxies collide (1), then merge (2), inducing a burst of stellar formation activity. After the merging, the gas and the stars fall towards the centre in a very compact structure (3). Part of the gas which did not fall back initially, gradually rebuilds a disc around the compact structure, making a new spiral galaxy (4 and 5). The images are pictures of distant galaxies at various redshifts taken by the Hubble Space Telescope. The central panel displays the star formation rate as a function of time. The numbers coincide with the numbers shown on the images. The story revealed by these observations is in agreement with the so-called "hierarchical merging of galaxies" scenario, present in the literature since about 20 years. According to this model, small galaxies merge to build larger ones. As François Hammer however points out: "In the current scenario, it was usually assumed that galaxy merging almost ceased 8,000 million years ago. Our complete set of observations show that this is far from being the case. In the following 4,000 million years, galaxies still merged to form the large spirals we observe in the local Universe." To account for all these properties, the astronomers thus devised a new galaxy formation scenario, comprising three major phases: a merger event, a compact galaxy phase and a "growth of the disc" phase (see PR Photo 02b/05). Because of the unique aspects of this scenario, where big galaxies get first disrupted by a major collision to be born again later as a present-day spiral galaxy, the astronomers rather logically dubbed their evolutionary sequence, the "spiral galaxy rebuilding". Although being at odds with standard views which assert that galaxy mergers produce elliptical galaxies instead of spiral ones, the astronomers stress that their scenario is consistent with the observed fractions of the different types of galaxies and can account for all the observations. The new scenario can indeed account for the formation of about three quarters of the present-day spiral galaxies, those with massive central bulge. It would apply for example to the Andromeda Galaxy but not to our own Milky way. It seems that our Galaxy somehow escaped major collisions in the last thousands of million years. Further observations, in particular with the FLAMES instrument on the VLT, will show if spiral galaxies are indeed relatively recent born-again systems created from major merger events.

Compressed domain ECG biometric with two-lead features

NASA Astrophysics Data System (ADS)

Lee, Wan-Jou; Chang, Wen-Whei

2016-07-01

This study presents a new method to combine ECG biometrics with data compression within a common JPEG2000 framework. We target the two-lead ECG configuration that is routinely used in long-term heart monitoring. Incorporation of compressed-domain biometric techniques enables faster person identification as it by-passes the full decompression. Experiments on public ECG databases demonstrate the validity of the proposed method for biometric identification with high accuracies on both healthy and diseased subjects.

Embedded wavelet packet transform technique for texture compression

NASA Astrophysics Data System (ADS)

Li, Jin; Cheng, Po-Yuen; Kuo, C.-C. Jay

1995-09-01

A highly efficient texture compression scheme is proposed in this research. With this scheme, energy compaction of texture images is first achieved by the wavelet packet transform, and an embedding approach is then adopted for the coding of the wavelet packet transform coefficients. By comparing the proposed algorithm with the JPEG standard, FBI wavelet/scalar quantization standard and the EZW scheme with extensive experimental results, we observe a significant improvement in the rate-distortion performance and visual quality.

Research on lossless compression of true color RGB image with low time and space complexity

NASA Astrophysics Data System (ADS)

Pan, ShuLin; Xie, ChengJun; Xu, Lin

2008-12-01

Eliminating correlated redundancy of space and energy by using a DWT lifting scheme and reducing the complexity of the image by using an algebraic transform among the RGB components. An improved Rice Coding algorithm, in which presents an enumerating DWT lifting scheme that fits any size images by image renormalization has been proposed in this paper. This algorithm has a coding and decoding process without backtracking for dealing with the pixels of an image. It support LOCO-I and it can also be applied to Coder / Decoder. Simulation analysis indicates that the proposed method can achieve a high image compression. Compare with Lossless-JPG, PNG(Microsoft), PNG(Rene), PNG(Photoshop), PNG(Anix PicViewer), PNG(ACDSee), PNG(Ulead photo Explorer), JPEG2000, PNG(KoDa Inc), SPIHT and JPEG-LS, the lossless image compression ratio improved 45%, 29%, 25%, 21%, 19%, 17%, 16%, 15%, 11%, 10.5%, 10% separately with 24 pieces of RGB image provided by KoDa Inc. Accessing the main memory in Pentium IV,CPU2.20GHZ and 256MRAM, the coding speed of the proposed coder can be increased about 21 times than the SPIHT and the efficiency of the performance can be increased 166% or so, the decoder's coding speed can be increased about 17 times than the SPIHT and the efficiency of the performance can be increased 128% or so.

An effective and efficient compression algorithm for ECG signals with irregular periods.

PubMed

Chou, Hsiao-Hsuan; Chen, Ying-Jui; Shiau, Yu-Chien; Kuo, Te-Son

2006-06-01

This paper presents an effective and efficient preprocessing algorithm for two-dimensional (2-D) electrocardiogram (ECG) compression to better compress irregular ECG signals by exploiting their inter- and intra-beat correlations. To better reveal the correlation structure, we first convert the ECG signal into a proper 2-D representation, or image. This involves a few steps including QRS detection and alignment, period sorting, and length equalization. The resulting 2-D ECG representation is then ready to be compressed by an appropriate image compression algorithm. We choose the state-of-the-art JPEG2000 for its high efficiency and flexibility. In this way, the proposed algorithm is shown to outperform some existing arts in the literature by simultaneously achieving high compression ratio (CR), low percent root mean squared difference (PRD), low maximum error (MaxErr), and low standard derivation of errors (StdErr). In particular, because the proposed period sorting method rearranges the detected heartbeats into a smoother image that is easier to compress, this algorithm is insensitive to irregular ECG periods. Thus either the irregular ECG signals or the QRS false-detection cases can be better compressed. This is a significant improvement over existing 2-D ECG compression methods. Moreover, this algorithm is not tied exclusively to JPEG2000. It can also be combined with other 2-D preprocessing methods or appropriate codecs to enhance the compression performance in irregular ECG cases.

Blocking reduction of Landsat Thematic Mapper JPEG browse images using optimal PSNR estimated spectra adaptive postfiltering

NASA Technical Reports Server (NTRS)

Linares, Irving; Mersereau, Russell M.; Smith, Mark J. T.

1994-01-01

Two representative sample images of Band 4 of the Landsat Thematic Mapper are compressed with the JPEG algorithm at 8:1, 16:1 and 24:1 Compression Ratios for experimental browsing purposes. We then apply the Optimal PSNR Estimated Spectra Adaptive Postfiltering (ESAP) algorithm to reduce the DCT blocking distortion. ESAP reduces the blocking distortion while preserving most of the image's edge information by adaptively postfiltering the decoded image using the block's spectral information already obtainable from each block's DCT coefficients. The algorithm iteratively applied a one dimensional log-sigmoid weighting function to the separable interpolated local block estimated spectra of the decoded image until it converges to the optimal PSNR with respect to the original using a 2-D steepest ascent search. Convergence is obtained in a few iterations for integer parameters. The optimal logsig parameters are transmitted to the decoder as a negligible byte of overhead data. A unique maxima is guaranteed due to the 2-D asymptotic exponential overshoot shape of the surface generated by the algorithm. ESAP is based on a DFT analysis of the DCT basis functions. It is implemented with pixel-by-pixel spatially adaptive separable FIR postfilters. PSNR objective improvements between 0.4 to 0.8 dB are shown together with their corresponding optimal PSNR adaptive postfiltered images.

Observer performance assessment of JPEG-compressed high-resolution chest images

NASA Astrophysics Data System (ADS)

Good, Walter F.; Maitz, Glenn S.; King, Jill L.; Gennari, Rose C.; Gur, David

1999-05-01

The JPEG compression algorithm was tested on a set of 529 chest radiographs that had been digitized at a spatial resolution of 100 micrometer and contrast sensitivity of 12 bits. Images were compressed using five fixed 'psychovisual' quantization tables which produced average compression ratios in the range 15:1 to 61:1, and were then printed onto film. Six experienced radiologists read all cases from the laser printed film, in each of the five compressed modes as well as in the non-compressed mode. For comparison purposes, observers also read the same cases with reduced pixel resolutions of 200 micrometer and 400 micrometer. The specific task involved detecting masses, pneumothoraces, interstitial disease, alveolar infiltrates and rib fractures. Over the range of compression ratios tested, for images digitized at 100 micrometer, we were unable to demonstrate any statistically significant decrease (p greater than 0.05) in observer performance as measured by ROC techniques. However, the observers' subjective assessments of image quality did decrease significantly as image resolution was reduced and suggested a decreasing, but nonsignificant, trend as the compression ratio was increased. The seeming discrepancy between our failure to detect a reduction in observer performance, and other published studies, is likely due to: (1) the higher resolution at which we digitized our images; (2) the higher signal-to-noise ratio of our digitized films versus typical CR images; and (3) our particular choice of an optimized quantization scheme.

JPEG2000 Image Compression on Solar EUV Images

NASA Astrophysics Data System (ADS)

Fischer, Catherine E.; Müller, Daniel; De Moortel, Ineke

2017-01-01

For future solar missions as well as ground-based telescopes, efficient ways to return and process data have become increasingly important. Solar Orbiter, which is the next ESA/NASA mission to explore the Sun and the heliosphere, is a deep-space mission, which implies a limited telemetry rate that makes efficient onboard data compression a necessity to achieve the mission science goals. Missions like the Solar Dynamics Observatory (SDO) and future ground-based telescopes such as the Daniel K. Inouye Solar Telescope, on the other hand, face the challenge of making petabyte-sized solar data archives accessible to the solar community. New image compression standards address these challenges by implementing efficient and flexible compression algorithms that can be tailored to user requirements. We analyse solar images from the Atmospheric Imaging Assembly (AIA) instrument onboard SDO to study the effect of lossy JPEG2000 (from the Joint Photographic Experts Group 2000) image compression at different bitrates. To assess the quality of compressed images, we use the mean structural similarity (MSSIM) index as well as the widely used peak signal-to-noise ratio (PSNR) as metrics and compare the two in the context of solar EUV images. In addition, we perform tests to validate the scientific use of the lossily compressed images by analysing examples of an on-disc and off-limb coronal-loop oscillation time-series observed by AIA/SDO.

Digital storage and analysis of color Doppler echocardiograms

NASA Technical Reports Server (NTRS)

Chandra, S.; Thomas, J. D.

1997-01-01

Color Doppler flow mapping has played an important role in clinical echocardiography. Most of the clinical work, however, has been primarily qualitative. Although qualitative information is very valuable, there is considerable quantitative information stored within the velocity map that has not been extensively exploited so far. Recently, many researchers have shown interest in using the encoded velocities to address the clinical problems such as quantification of valvular regurgitation, calculation of cardiac output, and characterization of ventricular filling. In this article, we review some basic physics and engineering aspects of color Doppler echocardiography, as well as drawbacks of trying to retrieve velocities from video tape data. Digital storage, which plays a critical role in performing quantitative analysis, is discussed in some detail with special attention to velocity encoding in DICOM 3.0 (medical image storage standard) and the use of digital compression. Lossy compression can considerably reduce file size with minimal loss of information (mostly redundant); this is critical for digital storage because of the enormous amount of data generated (a 10 minute study could require 18 Gigabytes of storage capacity). Lossy JPEG compression and its impact on quantitative analysis has been studied, showing that images compressed at 27:1 using the JPEG algorithm compares favorably with directly digitized video images, the current goldstandard. Some potential applications of these velocities in analyzing the proximal convergence zones, mitral inflow, and some areas of future development are also discussed in the article.

Optical Detection of Anomalous Nitrogen in Comets

NASA Astrophysics Data System (ADS)

2003-12-01

VLT Opens New Window towards Our Origins Summary A team of European astronomers [1] has used the UVES spectrograph on the 8.2-m VLT KUEYEN telescope to perform a uniquely detailed study of Comet LINEAR (C/2000 WM1) . This is the first time that this powerful instrument has been employed to obtain high-resolution spectra of a comet. At the time of the observations in mid-March 2002, Comet LINEAR was about 180 million km from the Sun, moving outwards after its perihelion passage in January. As comets are believed to carry "pristine" material - left-overs from the formation of the solar system, about 4,600 million years ago - studies of these objects are important to obtain clues about the origins of the solar system and the Earth in particular. The high quality of the data obtained of this moving 9th-magnitude object has permitted a determination of the cometary abundance of various elements and their isotopes [2]. Of particular interest is the unambiguous detection and measurement of the nitrogen-15 isotope. The only other comet in which this isotope has been observed is famous Comet Hale-Bopp - this was during the passage in 1997, when it was much brighter than Comet LINEAR. Most interestingly, Comet LINEAR and Comet Hale-Bopp display the same isotopic abundance ratio, about 1 nitrogen-15 atom for each 140 nitrogen-14 atoms ( 14 N/ 15 N = 140 ± 30) . That is about half of the terrestrial value (272). It is also very different from the result obtained by means of radio measurements of Comet Hale-Bopp ( 14 N/ 15 N = 330 ± 75). Optical and radio measurements concern different molecules (CN and HCN, respectively), and this isotopic anomaly must be explained by some differentiation mechanism. The astronomers conclude that part of the cometary nitrogen is trapped in macromolecules attached to dust particles . The successful entry of UVES into cometary research now opens eagerly awaited opportunities for similiar observations in other, comparatively faint comets. These studies will provide crucial information about the detailed composition of a much larger number of comets than hitherto possible and hence, more information about the primordial matter from which the solar system formed. A better understanding of the origins of the cometary material (in particular the HCN and CN molecules [3]) and the connection with heavier organic molecules is highly desirable. This is especially so in view of the probable rôle of comets in bringing to the young Earth materials essential for the subsequent formation of life on our planet . PR Photo 28a/03 : Comet LINEAR (C/2000 WM1) - direct image and UVES slit position. PR Photo 28b/03 : Part of the UVES spectrum of Comet LINEAR (C/2000 WM1) with CN-band. PR Photo 28c/03 : Identification of nitrogen-15 in the spectrum. Cometary material Knowledge of the abundance of the stable isotopes [2] of the light elements in different solar system objects provides critical clues to the origin and early evolution of these objects and of the system as a whole. In order to gain the best possible insight into the origins and formation of the niche in which we live, it is therefore important to determine such isotopic abundance ratios in as many members of the solar family as possible. This is particularly true for comets, believed to be carriers of well-preserved specimens of the pristine material from which the solar system was made, some 4,600 million years ago. However, the detailed study of cometary material is a difficult task. Measurements of isotopic ratios is an especially daunting undertaking, mainly because of the extreme weakness of the spectral signatures (emissions) of the less abundant species like carbon-13, nitrogen-15, etc.. Measurements of microwave emission from those atoms suffer from additional, inherent uncertainties connected to the much stronger emission of the more abundant species. Measurements in the optical spectral region thus take on particular importance in this context. However, it is exceedingly difficult to procure the high-quality, high-resolution spectra needed to show the very faint emissions of the rare species. So far, they were only possible when a very bright comet happened to pass by, perhaps once a decade, thereby significantly limiting such studies. And there has always been some doubt whether the brightest comets are also truly representative of this class of objects. Observations of fainter, more typical comets had to await the advent of powerful instruments and telescopes. First UVES spectrum of a comet ESO PR Photo 28a/03 ESO PR Photo 28a/03 [Preview - JPEG: 495 x 400 pix - 183k [Normal - JPEG: 990 x 800 pix - 450k] ESO PR Photo 28b/03 ESO PR Photo 28b/03 [Preview - JPEG: 502 x 400 pix - 115k [Normal - JPEG: 1004 x 800 pix - 290K] Captions : PR Photo 28a/03 displays an image of Comet LINEAR (C/2000 WM1) with the UVES slit viewer image. The colour composite in the large frame (sky field: 16 x 16 arcmin 2 ) was obtained by Gordon Garradd (Loomberah, NSW, Australia). [Image Copyright (c) 2002 Gordon Garradd (loomberah@ozemail.com.au]. The UVES slit viewer photo (small frame; 40 x 40 arcsec 2 ) is a false-colour image taken in the (red) R-band with UVES+KUEYEN on March 22, 2002; it shows the position of the narrow spectrograph slit (0.45 arcsec wide and 8 arcsec long) crossing the inner coma and through which the comet's light was captured to produce the high-resolution spectra. The slit has been offset from the center of light to reduce contamination from solar light reflected off dust particles in the comet's coma - there is most dust near the nucleus. PR Photo 28b/03 shows a small part of the UVES spectrum with an emission band (ultraviolet light at wavelength 390 nm) from CN molecules [3] in the comet's atmosphere. The emission lines are produced by absorption of the solar light by these molecules, followed by re-emission of lines of specific wavelengths. This physical process is known as "resonance-fluorescence" - it is the same process that causes glowing teeth and shirts in a Disco. The upper panel displays the "raw" spectrum; the lower is the "extracted" spectrum, now clearly displaying the individual emission lines. Observations of Comet LINEAR (C/2000 WM1) were carried out with the UV-Visual Echelle Spectrograph (UVES) mounted on the 8.2-m VLT KUEYEN telescope at the ESO Paranal Observatory (Chile) on four occasions during March 2002. At that time, the comet had moved past its perihelion and was by far the faintest comet for which such a detailed spectral analysis had ever been attempted. A number of 25-min exposures were secured, resulting in a total observing time of about 4 hours. The final spectrum covers the entire visual region (330 - 670 nm) and is one of the most detailed and information-rich cometary spectra ever obtained. PR Photo 28b/03 displays a small part of this spectrum. These observations are the first high resolution spectra of a comet taken with the VLT. Identification of nitrogen-15 ESO PR Photo 28c/03 ESO PR Photo 28c/03 [Preview - JPEG: 400 x 524 pix - 109k [Normal - JPEG: 800 x 1047 pix - 285k] Captions : PR Photo 28c/03 is an enlarged view of a small section of the high-resolution UVES spectrum of Comet LINEAR ( PR Photo 28b/03 ) with emission lines from CN-molecules (blue line), compared to the "synthetic" spectrum based on theoretical calculations and laboratory measurements (black line ; some of the lines are labeled with quantum numbers). In the upper panel, the synthetic spectrum has been produced on the basis of the most abundant isotopic species ( 12 C 14 N). The lower panel shows that the observed spectrum is in nearly perfect agreement with a synthetic spectrum which includes contributions from two other isotopic species, 13 C 14 N (emission lines at wavelengths indicated by red ticks) and 12 C 15 N (blue ticks); they are added in proportions of 1/115 and 1/140, respectively. The isotopic abundances of carbon-13 and nitrogen-15 are measured accordingly. Introducing instead the terrestrial ratio for nitrogen-15 (1/272) significantly degrades the fit and thus that ratio can clearly be ruled out in Comet LINEAR. At the time of the VLT observations, the comet was of 9th magnitude, i.e. about 15 times fainter than what can be perceived with the unaided eye. The distance from the Sun was about 180 million km; the distance from the Earth was 186 million km. The observations included calibration spectra of sunlight reflected from the lunar surface; they were used to "subtract" the solar signatures in the comet's spectrum, caused by reflection of sunlight from the dust particles around the comet. As expected, in addition to emission from "normal" CN-molecules ( 12 C 14 N), the UVES data also show emission lines of the 13 C 14 N-molecule that contains the rare isotope carbon-13. The derived 12 C/ 13 C isotopic ratio is 115 ± 20, quite similar to the "standard" solar system value of 89. However, there is also a series of weak features that are positioned exactly at the theoretical wavelengths of emission lines from 12 C 15 N-molecules, cf. PR Photo 28c/03 . The excellent fit that is evident in this diagram proves beyond any doubt the presence of nitrogen-15 in Comet LINEAR and allows a quite accurate determination of the isotopic ratio. The "anomalous" nitrogen isotope ratio in comets In 1997, the same group of astronomers obtained spectra of the (at that time) much brighter Comet Hale-Bopp with the 2.6-m NOT telescope (Roque de los Muchachos Observatory, La Palma, Canary Islands, Spain) in order to investigate the isotopic ratio of carbon-12 to carbon-13. Claude Arpigny remembers: " Interestingly, our spectra of Hale-Bopp showed a number of weak and unidentified emission lines. We later realised that they were positioned close to the theoretical wavelengths of some lines from the 12 C 15 N-molecule. This was a pleasant surprise, as lines from that molecular species were previously believed to be so faint that they would not be observable." He continues: "This identification is now fully confirmed with the UVES observations of Comet LINEAR. Our detections in these two comets are the first ever of those emission lines in comets ". The estimates of the 14 N/ 15 N isotopic ratios are very similar, 140 ± 35 for Hale-Bopp and 140 ± 30 for LINEAR. These ratios are remarkably low and different from the terrestrial value of 272. This means that these comets have comparatively more nitrogen-15 than has the Earth. No measurement has yet been made of the abundance of nitrogen-15 in the Sun. So which of the values corresponds to the composition of the material from which the solar system was made? Different origins? To date, only four cometary values of the 14 N/ 15 N isotopic ratio have been reported: two in the radio wavelength range and the two now measured by means of optical spectra. The radio measurements concern the HCN-molecule (hydrocyanic acid) in Comet Hale-Bopp, a "parent" molecule for the CN-molecules present in comets. Contrary to the optical measurements, the radio values (about 330 ± 75) are compatible with the terrestrial value (272). But radio measurements of carbon and nitrogen isotopic ratios are only possible on extraordinarily bright comets like Hale-Bopp, and even then, the achievable accuracy is very limited. This emphasizes the importance of performing this kind of research by means of optical observations. The origin of the isotopic discrepancy between different CN parents is likely due to fractionation mechanisms in the forming presolar nebula, e.g. when oxygen- and carbon-bearing molecules in high-density nebulae stick to cold (10K) dust grains. Macromolecules in space The astronomers think that the new results indicate that the HCN-molecule cannot be the only "parent" of the CN-molecule; the latter must also be produced by some as yet unknown parent(s) in which the nitrogen-15 isotope is even more abundant. In this connection, it is very interesting that an "excess" of nitrogen-15 is also known to exist in interplanetary dust particles (IDPs), captured by high-flying aircraft in the Earth's atmosphere. They represent the oldest material in the solar system that can be subjected to detailed laboratory analysis. Many of these particles are thought to originate from passing comets - this possibility is obviously supported by the new measurements. The nitrogen-15 carriers in IDPs have not been securely identified but are possibly organic macromolecules or polycyclic aromatic hydrocarbons (PAHs). It is thus possible that the additional parent(s) of cometary CN may belong to this ensemble of organic substances. Whatever the case, the longstanding question of nitrogen and its isotopic ratio(s) in the solar system, whether present and primordial, is notoriously enigmatic in several respects. However, the present results demonstrate that a detailed study of comets may deliver very useful clues. The team has now been granted more observing time with UVES and KUEYEN in order to pursue this important study by observing more comets.

A Forceful Demonstration by FORS

NASA Astrophysics Data System (ADS)

1998-09-01

New VLT Instrument Provides Impressive Images Following a tight schedule, the ESO Very Large Telescope (VLT) project forges ahead - full operative readiness of the first of the four 8.2-m Unit Telescopes will be reached early next year. On September 15, 1998, another crucial milestone was successfully passed on-time and within budget. Just a few days after having been mounted for the first time at the first 8.2-m VLT Unit Telescope (UT1), the first of a powerful complement of complex scientific instruments, FORS1 ( FO cal R educer and S pectrograph), saw First Light . Right from the beginning, it obtained some excellent astronomical images. This major event now opens a wealth of new opportunities for European Astronomy. FORS - a technological marvel FORS1, with its future twin (FORS2), is the product of one of the most thorough and advanced technological studies ever made of a ground-based astronomical instrument. This unique facility is now mounted at the Cassegrain focus of the VLT UT1. Despite its significant dimensions, 3 x 1.5 metres and 2.3 tonnes, it appears rather small below the giant 53 m 2 Zerodur main mirror. Profiting from the large mirror area and the excellent optical properties of the UT1, FORS has been specifically designed to investigate the faintest and most remote objects in the universe. This complex VLT instrument will soon allow European astronomers to look beyond current observational horizons. The FORS instruments are "multi-mode instruments" that may be used in several different observation modes. It is, e.g., possible to take images with two different image scales (magnifications) and spectra at different resolutions may be obtained of individual or multiple objects. Thus, FORS may first detect the images of distant galaxies and immediately thereafter obtain recordings of their spectra. This allows for instance the determination of their stellar content and distances. As one of the most powerful astronomical instruments of its kind, FORS1 is a real workhorse for the study of the distant universe. How FORS was built The FORS project is being carried out under ESO contract by a consortium of three German astronomical institutes, namely the Heidelberg State Observatory and the University Observatories of Göttingen and Munich. When this project is concluded, the participating institutes will have invested about 180 man-years of work. The Heidelberg State Observatory was responsible for directing the project, for designing the entire optical system, for developing the components of the imaging, spectroscopic, and polarimetric optics, and for producing the special computer software needed for handling and analysing the measurements obtained with FORS. Moreover, a telescope simulator was built in the shop of the Heidelberg observatory that made it possible to test all major functions of FORS in Europe, before the instrument was shipped to Paranal. The University Observatory of Göttingen performed the design, the construction and the installation of the entire mechanics of FORS. Most of the high-precision parts, in particular the multislit unit, were manufactured in the observatory's fine-mechanical workshops. The procurement of the huge instrument housings and flanges, the computer analysis for mechanical and thermal stability of the sensitive spectrograph and the construction of the handling, maintenance and aligning equipment as well as testing the numerous opto- and electro-mechanical functions were also under the responsibility of this Observatory. The University of Munich had the responsibility for the management of the project, the integration and test in the laboratory of the complete instrument, for design and installation of all electronics and electro-mechanics, and for developing and testing the comprehensive software to control FORS in all its parts completely by computers (filter and grism wheels, shutters, multi-object slit units, masks, all optical components, electro motors, encoders etc.). In addition, detailed computer software was provided to prepare the complex astronomical observations with FORS in advance and to monitor the instrument performance by quality checks of the scientific data accumulated. In return for building FORS for the community of European astrophysicists, the scientists in the three institutions of the FORS Consortium have received a certain amount of Guaranteed Observing Time at the VLT. This time will be used for various research projects concerned, among others, with minor bodies in the outer solar system, stars at late stages of their evolution and the clouds of gas they eject, as well as galaxies and quasars at very large distances, thereby permitting a look-back towards the early epoch of the universe. First tests of FORS1 at the VLT UT1: a great success After careful preparation, the FORS consortium has now started the so-called commissioning of the instrument. This comprises the thorough verification of the specified instrument properties at the telescope, checking the correct functioning under software control from the Paranal control room and, at the end of this process, a demonstration that the instrument fulfills its scientific purpose as planned. While performing these tests, the commissioning team at Paranal were able to obtain images of various astronomical objects, some of which are shown here. Two of these were obtained on the night of "FORS First Light". The photos demonstrate some of the impressive posibilities with this new instrument. They are based on observations with the FORS standard resolution collimator (field size 6.8 x 6.8 armin = 2048 x 2048 pixels; 1 pixel = 0.20 arcsec). Spiral galaxy NGC 1288 ESO PR Photo 37a/98 ESO PR Photo 37a/98 [Preview - JPEG: 800 x 908 pix - 224k] [High-Res - JPEG: 3000 x 3406 pix - 1.5Mb] A colour image of spiral galaxy NGC 1288, obtained on the night of "FORS First Light". The first photo shows a reproduction of a colour composite image of the beautiful spiral galaxy NGC 1288 in the southern constellation Fornax. PR Photo 37a/98 covers the entire field that was imaged on the 2048 x 2048 pixel CCD camera. It is based on CCD frames in different colours that were taken under good seeing conditions during the night of First Light (15 September 1998). The distance to this galaxy is about 300 million light-years; it recedes with a velocity of 4500 km/sec. Its diameter is about 200,000 light-years. Technical information : Photo 37a/98 is based on a composite of three images taken behind three different filters: B (420 nm; 6 min), V (530 nm; 3 min) and I (800 nm; 3min) during a period of 0.7 arcsec seeing. The field shown measures 6.8 x 6.8 arcmin. North is left; East is down. Distant cluster of galaxies ESO PR Photo 37b/98 ESO PR Photo 37b/98 [Preview - JPEG: 657 x 800 pix - 248k] [High-Res - JPEG: 2465 x 3000 pix - 1.9Mb] A peculiar cluster of galaxies in a sky field near the quasar PB5763 . ESO PR Photo 37c/98 ESO PR Photo 37c/98 [Preview - JPEG: 670 x 800 pix - 272k] [High-Res - JPEG: 2512 x 3000 pix - 1.9Mb] Enlargement from PR Photo 37b/98, showing the peculiar cluster of galaxies in more detail. The next photos are reproduced from a 5-min near-infrared exposure, also obtained during the night of First Light of the FORS1 instrument (September 15, 1998). PR Photo 37b/98 shows a sky field near the quasar PB5763 in which is also seen a peculiar, quite distant cluster of galaxies. It consists of a large number of faint and distant galaxies that have not yet been thoroughly investigated. Many other fainter galaxies are seen in other areas, for instance in the right part of the field. This cluster is a good example of a type of object to which much observing time with FORS will be dedicated, once it enters into regular operation. An enlargement of the same field is reproduced in PR Photo 37c/98. It shows the individual members of this cluster of galaxies in more detail. Note in particular the interesting spindle-shaped galaxy that apparently possesses an equatorial ring. There is also a fine spiral galaxy and many fainter galaxies. They may be dwarf members of the cluster or be located in the background at even larger distances. Technical information : PR Photos 37b/98 (negative) and 37c/98 (positive) are based on a monochrome image taken in 0.8 arcsec seeing through a near-infrared (I; 800 nm) filtre. The exposure time was 5 minutes and the image was flat-fielded. The fields shown measure 6.8 x 6.8 arcmin and 2.5 x 2.3 arcmin, respectively. North is to the upper left; East is to the lower left. Spiral galaxy NGC 1232 ESO PR Photo 37d/98 ESO PR Photo 37d/98 [Preview - JPEG: 800 x 912 pix - 760k] [High-Res - JPEG: 3000 x 3420 pix - 5.7Mb] A colour image of spiral galaxy NGC 1232, obtained on September 21, 1998. ESO PR Photo 37e/98 ESO PR Photo 37e/98 [Preview - JPEG: 800 x 961 pix - 480k] [High-Res - JPEG: 3000 x 3602 pix - 3.5Mb] Enlargement of central area of PR Photo 37d/98. This spectacular image (Photo 37d/98) of the large spiral galaxy NGC 1232 was obtained on September 21, 1998, during a period of good observing conditions. It is based on three exposures in ultra-violet, blue and red light, respectively. The colours of the different regions are well visible: the central areas (Photo 37e/98) contain older stars of reddish colour, while the spiral arms are populated by young, blue stars and many star-forming regions. Note the distorted companion galaxy on the left side of Photo 37d/98, shaped like the greek letter "theta". NGC 1232 is located 20 o south of the celestial equator, in the constellation Eridanus (The River). The distance is about 100 million light-years, but the excellent optical quality of the VLT and FORS allows us to see an incredible wealth of details. At the indicated distance, the edge of the field shown in PR Photo 37d/98 corresponds to about 200,000 lightyears, or about twice the size of the Milky Way galaxy. Technical information : PR Photos 37d/98 and 37e/98 are based on a composite of three images taken behind three different filters: U (360 nm; 10 min), B (420 nm; 6 min) and R (600 nm; 2:30 min) during a period of 0.7 arcsec seeing. The fields shown measure 6.8 x 6.8 arcmin and 1.6 x 1.8 arcmin, respectively. North is up; East is to the left. Note: [1] This Press Release is published jointly (in English and German) by the European Southern Observatory, the Heidelberg State Observatory and the University Observatories of Goettingen and Munich. Eine Deutsche Fassung dieser Pressemitteilung steht ebenfalls zur Verfügung. How to obtain ESO Press Information ESO Press Information is made available on the World-Wide Web (URL: http://www.eso.org ). ESO Press Photos may be reproduced, if credit is given to the European Southern Observatory.

High-Resolution Seismic-Reflection and Marine Magnetic Data Along the Hosgri Fault Zone, Central California

USGS Publications Warehouse

Sliter, Ray W.; Triezenberg, Peter J.; Hart, Patrick E.; Watt, Janet T.; Johnson, Samuel Y.; Scheirer, Daniel S.

2009-01-01

The U.S. Geological Survey (USGS) collected high-resolution shallow seismic-reflection and marine magnetic data in June 2008 in the offshore areas between the towns of Cayucos and Pismo Beach, Calif., from the nearshore (~6-m depth) to just west of the Hosgri Fault Zone (~200-m depth). These data are in support of the California State Waters Mapping Program and the Cooperative Research and Development Agreement (CRADA) between the Pacific Gas & Electric Co. and the U.S. Geological Survey. Seismic-reflection and marine magnetic data were acquired aboard the R/V Parke Snavely, using a SIG 2Mille minisparker seismic source and a Geometrics G882 cesium-vapor marine magnetometer. More than 550 km of seismic and marine magnetic data was collected simultaneously along shore-perpendicular transects spaced 800 m apart, with an additional 220 km of marine magnetometer data collected across the Hosgri Fault Zone, resulting in spacing locally as smallas 400 m. This report includes maps of the seismic-survey sections, linked to Google Earth software, and digital data files showing images of each transect in SEG-Y, JPEG, and TIFF formats, as well as preliminary gridded marine-magnetic-anomaly and residual-magnetic-anomaly (shallow magnetic source) maps.

Glowing Hot Transiting Exoplanet Discovered

NASA Astrophysics Data System (ADS)

2003-04-01

VLT Spectra Indicate Shortest-Known-Period Planet Orbiting OGLE-TR-3 Summary More than 100 exoplanets in orbit around stars other than the Sun have been found so far. But while their orbital periods and distances from their central stars are well known, their true masses cannot be determined with certainty, only lower limits. This fundamental limitation is inherent in the common observational method to discover exoplanets - the measurements of small and regular changes in the central star's velocity, caused by the planet's gravitational pull as it orbits the star. However, in two cases so far, it has been found that the exoplanet's orbit happens to be positioned in such a way that the planet moves in front of the stellar disk, as seen from the Earth. This "transit" event causes a small and temporary dip in the star's brightness, as the planet covers a small part of its surface, which can be observed. The additional knowledge of the spatial orientation of the planetary orbit then permits a direct determination of the planet's true mass. Now, a group of German astronomers [1] have found a third star in which a planet, somewhat larger than Jupiter, but only half as massive, moves in front of the central star every 28.5 hours . The crucial observation of this solar-type star, designated OGLE-TR-3 [2] was made with the high-dispersion UVES spectrograph on the Very Large Telescope (VLT) at the ESO Paranal Observatory (Chile). It is the exoplanet with the shortest period found so far and it is very close to the star, only 3.5 million km away. The hemisphere that faces the star must be extremely hot, about 2000 °C and the planet is obviously losing its atmosphere at high rate . PR Photo 10a/03 : The star OGLE-TR-3 . PR Photo 10b/03 : VLT UVES spectrum of OGLE-TR-3. PR Photo 10c/03 : Relation between stellar brightness and velocity (diagram). PR Photo 10d/03 : Observed velocity variation of OGLE-TR-3. PR Photo 10e/03 : Observed brightness variation of OGLE-TR-3. The search for exoplanets More than 100 planets in orbit around stars other than the Sun have been found so far. These "exoplanets" come in many different sizes and they move in a great variety of orbits at different distances from their central star, some nearly round and others quite elongated. Some planets are five to ten times more massive than the largest one in the solar system, Jupiter - the lightest exoplanets known at this moment are about half as massive as Saturn, i.e. about 50 times more massive than the Earth. Astronomers are hunting exoplanets not just to discover more such objects, but also to learn more about the apparent diversity of planetary systems. The current main research goal is to eventually discover an Earth-like exoplanet, but the available telescopes and instrumentation are still not "sensitive" enough for this daunting task. However, also in this context, it is highly desirable to know not only the orbits of the observable exoplanets, but also their true masses . But this is not an easy task. Masses of exoplanets Virtually all exoplanets detected so far have been found by an indirect method - the measurement of stellar velocity variations . It is based on the gravitational pull of the orbiting planet that causes the central star to move a little back and forth; the heavier the planet, the greater is the associated change in the star's velocity. This technique is rapidly improving: the new HARPS spectrograph (High Accuracy Radial Velocity Planet Searcher) , now being tested on the 3.6-m telescope at the ESO La Silla Observatory , can measure such stellar motions with an unrivalled accuracy of about 1 metre per second (m/s), cf. ESO PR 06/03 . It will shortly be able to search for exoplanets only a few times more massive than the Earth. However, velocity measurements alone do not allow to determine the true mass of the orbiting planet. Because of the unknown inclination of the planetary orbit (to the line-of-sight), they only provide a lower limit to this mass . Additional information about this orbital inclination is therefore needed to derive the true mass of an exoplanet. The transit method Fortunately, this information becomes available if the exoplanet is known to move across ("transit") the star's disk, as seen from the Earth; the orbital plane must then necessarily be very near the line-of-sight. This phenomenon is exactly the same that happens in our own solar system, when the inner planets Mercury and Venus pass in front of the solar disk, as seen from the Earth [3]. A solar eclipse (caused by the Moon moving in front of the Sun) is a more extreme case of the same type of event. During such an exoplanet transit, the observed brightness of the star will decrease slightly because the planet blocks a part of the stellar light. The larger the planet, the more of the light is blocked and the more the brightness of the star will decrease. A study of the way this brightness changes with time (astronomers refer to the "light curve"), when combined with radial velocity measurements, allows a complete determination of the planetary orbit, including the exact inclination. It also provides accurate information about the planet's size, true mass and hence, density. The chances that a particular exoplanet passes in front of the disk of its central star as seen from the Earth are small. However, because of the crucial importance of such events in order to characterize exoplanets fully, astronomers have for some time been actively searching for stars that experience small regularly occurring "brightness dips" that might possibly be caused by exoplanetary transits. The OGLE list Last year, a first list of 59 such possible cases of stars with transiting planets was announced by the Optical Gravitational Lensing Experiment (OGLE) [2]. These stars were found - within a sample of about 5 million stars observed during a 32-day period - to exhibit small and regular brightness dips that might possibly be caused by transits of an exoplanet. For one of these stars, OGLE-TR-56 , a team of American astronomers soon thereafter observed slight variations of the velocity , strongly indicating the presence of an exoplanet around that star. UVES spectra of OGLE-TR-3 ESO PR Photo 10a/03 ESO PR Photo 10a/03 [Preview - JPEG: 400 x 466 pix - 41k [Normal - JPEG: 800 x 931 pix - 280k] ESO PR Photo 10b/03 ESO PR Photo 10b/03 [Preview - JPEG: 492 x 400 pix - 52k [Normal - JPEG: 984 x 800 pix - 224k] Captions : PR Photo 10a/03 shows the 16.5-mag star OGLE-TR-3 , a solar-like star in the direction of the Galactic Center, discovered during an extensive photometric search for planetary and low-luminosity object transits [2]. The image is reproduced from an I-band CCD frame of a 1 x 1 arcmin 2 sky field. North is up and East is left. PR Photo 10b/03 displays a small portion of a high-dispersion spectrum of OGLE-TR-3 , obtained with the UVES spectrograph at the 8.2-m VLT KUEYEN telescope at the Paranal Observatory (Chile). It is divided into five adjacent wavelength intervals and represents the mean of ten 1-hour spectral exposures. The fully drawn curve shows the spectrum of the "best fitting" stellar model from which the composition, temperature, mass, age of OGLE-TR-3 were deduced. Now, a team of German and ESO astronomers [1] have used the UVES High-Dispersion Spectrograph on the 8.2-m VLT KUEYEN telescope at the Paranal Observatory (Chile) to obtain very detailed spectra of another star on that list, OGLE-TR-3 , cf. PR Photos 10a-b/03 . Over a period of one month, a total of ten high-resolution spectra - each with an exposure time of about one hour - were obtained of the 16.5-mag object, i.e. its brightness is about 16,000 fainter that what can be perceived with the unaided eye. A careful evaluation shows that OGLE-TR-3 is very similar to the Sun, with a temperature of about 5800 °C (6100 K). And most interestingly, it undergoes velocity variations of the order of 120 m/s . The exoplanet at OGLE-TR-3 ESO PR Photo 10c/03 ESO PR Photo 10c/03 [Preview - JPEG: 400 x 507 pix - 24k [Normal - JPEG: 800 x 1014 pix - 95k] ESO PR Photo 10d/03 ESO PR Photo 10d/03 [Preview - JPEG: 466 x 400 pix - 20k [Normal - JPEG: 932 x 800 pix - 120k] ESO PR Photo 10e/03 ESO PR Photo 10e/03 [Preview - JPEG: 510 x 200 pix - 21k [Normal - JPEG: 1024 x 400 pix - 120k] Captions : PR Photo 10c/03 illustrates the relationship between the variations in stellar brightness and velocity, caused by an orbiting exoplanet that transits the disk of its central star. Consecutive positions of the planet in its (circular) orbit are marked by black dots, with the motion from left to right. The figure has been drawn to scale, i.e. the dots actually represent the size of the planet itself. At the top is the view of the planetary orbit from above - below a view from the Earth with the planetary transit. Further down, the lightcurve with a brightness (intensity) dip when the planet blocks a small part of the star's light is shown, and at the bottom the corresponding change in the star's velocity. Before the transit, when the planet moves towards us, the star moves in the opposite direction, i.e. away from us and the velocity is positive; during the transit, the relative velocity is zero and later is becomes negative as the star moves towards us. PR Photo 10d/03 displays the velocity variation of the star OGLE-TR-3 , as measured from ten VLT-UVES spectra (each with 1-hour exposure time) and plotted according to the "photometric phase". This means that the planetary transit occurs at phase 0 (left) and again at phase 1 (right). The observed variation is in agreement with the expected one, cf. PR Photo 10c/03 . The fully drawn curve represents the best fit to the observations (velocity variation about 120 m/s) - the mass of the planet is derived from this. PR Photo 10e/03 shows the brightness variation ("light-curve") of the star OGLE-TR-3 obtained during the OGLE observations [2]. The crosses correspond to the observations and the fully drawn curve represents a model fit, with the stellar parameters from the analysis of the UVES spectra (1 solar radius and 1 solar mass) and the planetary parameters from the velocity analysis (0.6 Jupiter mass). The best fit allows determination of the planet's size as about 200,000 km (1.4 times the size of Jupiter). The 2 per cent dip in the brightness of OGLE-TR-3 , as observed during the OGLE programme, occurs every 28 hours 33 minutes (1.1899 days), cf. PR Photo 10e/03 . The UVES velocity measurements ( PR Photo 10d/03 ) fit this period well and reveal, with high probability, the presence of an exoplanet orbiting OGLE-TR-3 with this period. In any case, the observations firmly exclude that the well observed brightness variations could be due to a small stellar companion. A red dwarf star would have caused velocity variations of 15 km/s and a brown dwarf star 2.5 km/s; both would have been easy to observe with UVES, and it is clear that such variations can be excluded. Although the available observations are still insufficient to allow an accurate determination of the planetary properties, the astronomers provisionally deduce a true mass of the planet of the order of one half of that of Jupiter . The density is found to be about 250 kg/m 3 , only one-quarter of that of water or one-fifth of that of Jupiter, so the planet is quite big for this mass - a bit "blown up". It is obviously a planet of the gaseous type . A very hot planet The orbital period, 28 hours 33 minutes (1.1899 days), is the shortest known for any exoplanet and the distance between the star and the planet is correspondingly small, only 3.5 million kilometres . The temperature of the side of the planet facing the star must therefore be very high, of the order of 2000 °C . Clearly, the planet must be losing its atmosphere by evaporation. The astronomers also conclude that it might in fact be possible to observe this exoplanet directly because of its comparatively strong infrared radiation. An attempt to do so will soon be made. As only the third exoplanet found this way (after those at the stars HD209458 and OGLE-TR-56 ), the new object confirms the current impression that a considerable number of stars may possess giant planets in close orbits. Since such planets cannot form so close to their parent star, they must have migrated inwards to the current orbit from a much larger, initial distance. It is not known at this time with certainty how this might happen. Future prospects It is expected that more observational campaigns will be made to search for transiting planets around other stars. There is good hope that OGLE-TR-3 and OGLE-TR-56 are just the first two of a substantial number of exoplanets to be discovered this way. Some years from now, searches will also begin from dedicated space observatories, e.g. ESA's Eddington and Darwin , and NASA's Kepler .

Analyzing huge pathology images with open source software.

PubMed

Deroulers, Christophe; Ameisen, David; Badoual, Mathilde; Gerin, Chloé; Granier, Alexandre; Lartaud, Marc

2013-06-06

Digital pathology images are increasingly used both for diagnosis and research, because slide scanners are nowadays broadly available and because the quantitative study of these images yields new insights in systems biology. However, such virtual slides build up a technical challenge since the images occupy often several gigabytes and cannot be fully opened in a computer's memory. Moreover, there is no standard format. Therefore, most common open source tools such as ImageJ fail at treating them, and the others require expensive hardware while still being prohibitively slow. We have developed several cross-platform open source software tools to overcome these limitations. The NDPITools provide a way to transform microscopy images initially in the loosely supported NDPI format into one or several standard TIFF files, and to create mosaics (division of huge images into small ones, with or without overlap) in various TIFF and JPEG formats. They can be driven through ImageJ plugins. The LargeTIFFTools achieve similar functionality for huge TIFF images which do not fit into RAM. We test the performance of these tools on several digital slides and compare them, when applicable, to standard software. A statistical study of the cells in a tissue sample from an oligodendroglioma was performed on an average laptop computer to demonstrate the efficiency of the tools. Our open source software enables dealing with huge images with standard software on average computers. They are cross-platform, independent of proprietary libraries and very modular, allowing them to be used in other open source projects. They have excellent performance in terms of execution speed and RAM requirements. They open promising perspectives both to the clinician who wants to study a single slide and to the research team or data centre who do image analysis of many slides on a computer cluster. The virtual slide(s) for this article can be found here:http://www.diagnosticpathology.diagnomx.eu/vs/5955513929846272.

Effects of compression and individual variability on face recognition performance

NASA Astrophysics Data System (ADS)

McGarry, Delia P.; Arndt, Craig M.; McCabe, Steven A.; D'Amato, Donald P.

2004-08-01

The Enhanced Border Security and Visa Entry Reform Act of 2002 requires that the Visa Waiver Program be available only to countries that have a program to issue to their nationals machine-readable passports incorporating biometric identifiers complying with applicable standards established by the International Civil Aviation Organization (ICAO). In June 2002, the New Technologies Working Group of ICAO unanimously endorsed the use of face recognition (FR) as the globally interoperable biometric for machine-assisted identity confirmation with machine-readable travel documents (MRTDs), although Member States may elect to use fingerprint and/or iris recognition as additional biometric technologies. The means and formats are still being developed through which biometric information might be stored in the constrained space of integrated circuit chips embedded within travel documents. Such information will be stored in an open, yet unalterable and very compact format, probably as digitally signed and efficiently compressed images. The objective of this research is to characterize the many factors that affect FR system performance with respect to the legislated mandates concerning FR. A photograph acquisition environment and a commercial face recognition system have been installed at Mitretek, and over 1,400 images have been collected of volunteers. The image database and FR system are being used to analyze the effects of lossy image compression, individual differences, such as eyeglasses and facial hair, and the acquisition environment on FR system performance. Images are compressed by varying ratios using JPEG2000 to determine the trade-off points between recognition accuracy and compression ratio. The various acquisition factors that contribute to differences in FR system performance among individuals are also being measured. The results of this study will be used to refine and test efficient face image interchange standards that ensure highly accurate recognition, both for automated FR systems and human inspectors. Working within the M1-Biometrics Technical Committee of the InterNational Committee for Information Technology Standards (INCITS) organization, a standard face image format will be tested and submitted to organizations such as ICAO.

Analyzing huge pathology images with open source software

PubMed Central

2013-01-01

Background Digital pathology images are increasingly used both for diagnosis and research, because slide scanners are nowadays broadly available and because the quantitative study of these images yields new insights in systems biology. However, such virtual slides build up a technical challenge since the images occupy often several gigabytes and cannot be fully opened in a computer’s memory. Moreover, there is no standard format. Therefore, most common open source tools such as ImageJ fail at treating them, and the others require expensive hardware while still being prohibitively slow. Results We have developed several cross-platform open source software tools to overcome these limitations. The NDPITools provide a way to transform microscopy images initially in the loosely supported NDPI format into one or several standard TIFF files, and to create mosaics (division of huge images into small ones, with or without overlap) in various TIFF and JPEG formats. They can be driven through ImageJ plugins. The LargeTIFFTools achieve similar functionality for huge TIFF images which do not fit into RAM. We test the performance of these tools on several digital slides and compare them, when applicable, to standard software. A statistical study of the cells in a tissue sample from an oligodendroglioma was performed on an average laptop computer to demonstrate the efficiency of the tools. Conclusions Our open source software enables dealing with huge images with standard software on average computers. They are cross-platform, independent of proprietary libraries and very modular, allowing them to be used in other open source projects. They have excellent performance in terms of execution speed and RAM requirements. They open promising perspectives both to the clinician who wants to study a single slide and to the research team or data centre who do image analysis of many slides on a computer cluster. Virtual slides The virtual slide(s) for this article can be found here: http://www.diagnosticpathology.diagnomx.eu/vs/5955513929846272 PMID:23829479

Coming Home at Paranal

NASA Astrophysics Data System (ADS)

2002-02-01

Unique "Residencia" Opens at the VLT Observatory Summary The Paranal Residencia at the ESO VLT Observatory is now ready and the staff and visitors have moved into their new home. This major architectural project has the form of a unique subterranean construction with a facade opening towards the Pacific Ocean , far below at a distance of about 12 km. Natural daylight is brought into the building through a 35-m wide glass-covered dome, a rectangular courtyard roof and various skylight hatches. Located in the middle of the Atacama Desert, one of the driest areas on Earth, the Residencia incorporates a small garden and a swimming pool, allowing the inhabitants to retreat from time to time from the harsh outside environment. Returning from long shifts at the VLT and other installations on the mountain, here they can breathe moist air and receive invigorating sensory impressions. With great originality of the design, it has been possible to create an interior with a feeling of open space - this is a true "home in the desert" . Moreover, with strict ecological power, air and water management , the Paranal Residencia has already become a symbol of innovative architecture in its own right. Constructed with robust, but inexpensive materials, it is an impressively elegant and utilitarian counterpart to the VLT high-tech facilities poised some two hundred meters above, on the top of the mountain. PR Photo 05a/02 : Aerial view of the Paranal Observatory area. PR Photo 05b/02 : Aerial view of the Paranal Residencia . PR Photo 05c/02 : Outside view of the Paranal Residencia . PR Photo 05d/02 : The Entry Hall (fisheye view). PR Photo 05e/02 : The Entry Hall with garden and pool. PR Photo 05f/02 : The Reception Area . PR Photo 05g/02 : The Reception Area - decoration. PR Photo 05h/02 : The Reception Area - decoration. PR Photo 05i/02 : The Reception Area - decoration. PR Photo 05j/02 : View towards the Cantine . PR Photo 05k/02 : View towards the Kitchen . PR Photo 05l/02 : View of the Corridors . PR Photo 05m/02 : A Bedroom . PR Photo 05n/02 : The main facade in evening light . PR Photo 05o/02 : View from the Observing Platform towards the Residencia in evening light. The Paranal Residencia ESO PR Photo 05a/02 ESO PR Photo 05a/02 [Preview - JPEG: 611 x 400 pix - 73k] [Normal - JPEG: 1222 x 800 pix - 936k] [HiRes - JPEG: 3000 x 1964 pix - 4.6M] ESO PR Photo 05b/02 ESO PR Photo 05b/02 [Preview - JPEG: 619 x 400 pix - 92k] [Normal - JPEG: 1238 x 800 pix - 944k] [HiRes - JPEG: 3000 x 1938 pix - 3.1M] Caption : PR Photo 05a/02 shows an aerial view of the Paranal Observatory. Below the observing platform at the top of the mountain - at a distance of about 3 km - is the Base Camp with the technical area (to the right of the road) and the new Residencia building (left of the road). To the extreme left is a temporary container camp of the construction company. PR Photo 05b/02 shows the Base Camp in more detail. In the course of 2002, many of the containers on the right side will be removed. The square building in the foreground to the left of the entrance gate is the future "Visitors' Centre".- A dummy 8.2-m concrete mirror is also placed here. These photos were made by ESO engineer Gert Hüdepohl during the final construction phase in late 2001. Ever since the construction of the ESO Very Large Telescope (VLT) at Paranal began in 1991, staff and visitors have resided in cramped containers in the "Base Camp". This is one of driest and most inhospitable areas in the Chilean Atacama Desert and eleven years is a long time to wait. However, there was never any doubt that the construction of the telescope itself must have absolute priority. Nevertheless, with the major technical installations in place, the time had come to develop a more comfortable and permanent base of living at Paranal, outside the telescope area. A unique architectural concept The concept for the Paranal Residencia emerged from a widely noted international architectural competition, won by Auer and Weber Freie Architekten from Munich (Germany), and with Dominik Schenkirz as principal designer. The interior furnishing and decoration was awarded to the Chilean architect Paula Gutierrez . The construction began in late 1998. Information about this work and several photos illustrating the progress have been published as PR Photos 31a-d/99 , PR Photo 43h/99 and PR Photos 04b-d/01 . Taking advantage of an existing depression in the ground, the architects created a unique subterranean construction with a single facade opening towards the Pacific Ocean , far below at a distance of about 12 km. It has the same colour as the desert and blends perfectly into the surroundings. The Paranal Residencia is elegant, with robust and inexpensive materials. Natural daylight is brought into the building through a 35-m wide glass-covered dome, a rectangular courtyard roof and various skylight hatches. The great originality of this design has made it possible to create an interior with a feeling of open space, despite the underground location. Some building characteristics are indicated below Facilities at the Residencia To the visitor who arrives at the Paranal Residencia from the harsh natural environment, the welcoming feeling under the dome is unexpected and instantly pleasant. This is a true "oasis" within coloured concrete walls and the air is agreeably warm and moist. There is a strong sense of calm and serenity and, above all, a feeling of coming home . At night, the lighting below the roofing closure fabric is spectacular and the impression on the mind is overwhelming. The various facilities are integrated over four floors below ground level. They include small, but nice and simple bedrooms, offices, meeting points, a restaurant, a library, a reception area, a cinema and other recreational areas. The natural focal point is located next to the reception at the entrance. The dining room articulates the building at the -2 level and view points through the facade form bridges between the surrounding Paranal desert and the interior. Simple, but elegant furnishing and specially manufactured carpeting complement a strong design of perspectives. The Republic of Chile, the host state for the ESO Paranal Observatory, is present with its emblematic painter Roberto Matta . Additional space is also provided for a regional art and activity display. The staff moved out of the containers and into their new home in mid-January 2002. Today, the Paranal Residencia has already become a symbol of innovative architecture in its own right, an impressively elegant and utilitarian counterpart to the VLT high-tech facilities poised some two hundred meters above, on the top of the mountain. Some building characteristics * Construction initiated in 1998 * Area: 10000 m 2 * Total cost: 12 Million Euro (less than 2% of the total cost of the VLT project), approx. 1200 Euro/m 2 * 108 bedrooms, each with 16 m 2 * Cantine capacity for 200 persons * 22 offices * 5 terraces/viewpoints * 70-seat cinema room * Multiple meeting areas * Double room library * Building management control for the environment and the lighting * Swimming pool; water treatment and grey water recirculation * Modular concept with potential for extension to 200 rooms * Completely light-tight and with a high level of sound insulation * Communication network with phone and TV-set in each room * Main contractors: Vial y Vives, Petricio Industrial, Koch The Paranal Residencia: A Photo Collection

Recent Advances in Compressed Sensing: Discrete Uncertainty Principles and Fast Hyperspectral Imaging

DTIC Science & Technology

2015-03-26

Fourier Analysis and Applications, vol. 14, pp. 838–858, 2008. 11. D. J. Cooke, “A discrete X - ray transform for chromotomographic hyperspectral imaging ... medical imaging , e.g., magnetic resonance imaging (MRI). Since the early 1980s, MRI has granted doctors the ability to distinguish between healthy tissue...i.e., at most K entries of x are nonzero. In many settings, this is a valid signal model; for example, JPEG2000 exploits the fact that natural images

The effect of lossy image compression on image classification

NASA Technical Reports Server (NTRS)

Paola, Justin D.; Schowengerdt, Robert A.

1995-01-01

We have classified four different images, under various levels of JPEG compression, using the following classification algorithms: minimum-distance, maximum-likelihood, and neural network. The training site accuracy and percent difference from the original classification were tabulated for each image compression level, with maximum-likelihood showing the poorest results. In general, as compression ratio increased, the classification retained its overall appearance, but much of the pixel-to-pixel detail was eliminated. We also examined the effect of compression on spatial pattern detection using a neural network.

The Orion Nebula: The Jewel in the Sword

NASA Astrophysics Data System (ADS)

2001-01-01

Orion the Hunter is perhaps the best known constellation in the sky, well placed in the evening at this time of the year for observers in both the northern and southern hemispheres, and instantly recognisable. And for astronomers, Orion is surely one of the most important constellations, as it contains one of the nearest and most active stellar nurseries in the Milky Way, the galaxy in which we live. Here tens of thousands of new stars have formed within the past ten million years or so - a very short span of time in astronomical terms. For comparison: our own Sun is now 4,600 million years old and has not yet reached half-age. Reduced to a human time-scale, star formation in Orion would have been going on for just one month as compared to the Sun's 40 years. Just below Orion's belt, the hilt of his sword holds a great jewel in the sky, the beautiful Orion Nebula . Bright enough to be seen with the naked eye, a small telescope or even binoculars show the nebula to be a few tens of light-years' wide complex of gas and dust, illuminated by several massive and hot stars at its core, the famous Trapezium stars . However, the heart of this nebula also conceals a secret from the casual observer. There are in fact about one thousand very young stars about one million years old within the so-called Trapezium Cluster , crowded into a space less than the distance between the Sun and its nearest neighbour stars. The cluster is very hard to observe in visible light, but is clearly seen in the above spectacular image of this area ( ESO PR 03a/01 ), obtained in December 1999 by Mark McCaughrean (Astrophysical Institute Potsdam, Germany) and his collaborators [1] with the infrared multi-mode ISAAC instrument on the ESO Very Large Telescope (VLT) at Paranal (Chile). Many details are seen in the new ISAAC image ESO PR Photo 03b/01 ESO PR Photo 03b/01 [Preview - JPEG: 400 x 589 pix - 62k] [Normal - JPEG: 800 x 1178 pix - 648k] [Hires - JPEG: 1957 x 2881 pix - 2.7M] ESO PR Photo 03c/01 ESO PR Photo 03c/01 [Preview - JPEG: 400 x 452 pix - 57k] [Normal - JPEG: 800 x 904 pix - 488k] [Hires - JPEG: 2300 x 2600 pix - 3.3M] Caption : PR Photo 03b/01 and PR Photo 03c/01 show smaller, particularly interesting areas of PR Photo 03a/01 . Photo 03b/01 shows the traces of a massive outflow of gas from a very young object embedded in the dense molecular cloud behind the Orion Nebula. Shards of gas from the explosion create shocks and leave bow-waves as they move at speeds of up to 200 km/sec from the source. Photo 03c/01 shows the delicate tracery created at the so-called Bright Bar , as the intense UV-light and strong winds from the hot Trapezium stars eat their way into the surrounding molecular cloud. Also visible are a number of very young red objects partly hidden in the cloud, waiting to be revealed as new members of the Trapezium Cluster . Technical information about these photos is available below. Indeed, at visible wavelengths, the dense cluster of stars at the centre is drowned out by the light from the nebula and obscured by remnants of the dust in the gas from which they were formed. However, at longer wavelengths, these obscuring effects are reduced, and the cluster is revealed. In the past couple of years, several of the world's premier ground- and space-based telescopes have made new detailed infrared studies of the Orion Nebula and the Trapezium Cluster , but the VLT image shown here is the "deepest" wide-field image obtained so far. The large collecting area of the VLT and the excellent seeing of the Paranal site combined to yield this beautiful image, packed full of striking details. Powerful explosions and winds from the most massive stars in the region are evident, as well as the contours of gas sculpted by these stars, and more finely focused jets of gas flowing from the smaller stars. Sharper images from the VLT ESO PR Photo 03d/01 ESO PR Photo 03d/01 [Preview - JPEG: 400 x 490 pix - 28k] [Normal - JPEG: 800 x 980 pix - 192k] [Hi-Res - JPEG: 2273 x 2784 pix - 976k] Caption : PR Photo 03d/01 shows a small section of the observational data (in one infrared spectral band only, here reproduced in B/W) on which PR Photo 03a/01 is based. The field is centred on one of the famous Orion silhouette disks (Orion 114-426) (it is located approximately halfway between the centre and the right edge of PR Photo 03c/01 ). The dusty disk itself is seen edge-on as a dark streak against the background emission of the Orion Nebula, while the bright fuzzy patches on either side betray the presence of the embedded parent star that illuminates tenuous collections of dust above its north and south poles to create these small reflection nebulae. Recent HST studies suggest that the very young Orion 114-426 disk - that is thirty times bigger than our present-day Solar System - may already be showing signs of forming its own proto-planetary system. Technical information about this photo is available below. It is even possible to see disks of dust and gas surrounding a few of the young stars, as silhouettes in projection against the bright background of the nebula. Many of these disks are very small and usually only seen on images obtained with the Hubble Space Telescope (HST) [2]. However, under the best seeing conditions on Paranal, the sharpness of VLT images at infrared wavelengths approaches that of the HST in this spectral band, revealing some of these disks, as shown in PR Photo 03d/01 . Indeed, the theoretical image sharpness of the 8.2-m VLT is more than three times better than that of the 2.4-m HST. Thus, the VLT will soon yield images of small regions with even higher resolution by means of the High-Resolution Near-Infrared Camera (CONICA) and the Nasmyth Adaptive Optics System (NAOS) that will compensate the smearing effect introduced by the turbulence in the atmosphere. Later on, extremely sharp images will be obtained when all four VLT telescopes are combined to form the Very Large Telescope Interferometer (VLTI). With these new facilities, astronomers will be able to make very detailed studies - among others, they will be looking for evidence that the dust and gas in these disks might be agglomerating to form planets. Free-floating planets in Orion? Recently, research teams working at other telescopes have claimed to have already seen planets in the Orion Nebula, as very dim objects, apparently floating freely between the brighter stars in the cluster. They calculated that if those objects are of the same age as the other stars, if they are located in the cluster, and if present theoretical predictions of the brightness of young stars and planets are correct, then they should have masses somewhere between 5 and 15 times that of planet Jupiter. Astronomer Mark McCaughrean is rather sceptical about this: " Calling these objects "planets" of course sounds exciting, but that interpretation is based on a number of assumptions. To me it seems equally probable that they are somewhat older, higher-mass objects of the "brown dwarf" type from a previous generation of star formation in Orion, which just happen to lie near the younger Trapezium Cluster today. Even if these objects were confirmed to have very low masses, many astronomers would disagree with them being called planets, since the common idea of a planet is that it should be in orbit around a star ". He explains: " While planets form in circumstellar disks, current thinking is that these Orion Nebula objects probably formed in the same way as do stars and brown dwarfs, and so perhaps we'd be better off talking about them just as low-mass brown dwarfs " and also notes that " similar claims of "free-floating planets" found in another cluster associated with the star Sigma Orionis have also been met with some scepticism ". Here, as in other branches of science, claim, counter-claim, scepticism and amicable controversy are typical elements of the scientific search for the truth. Thus the goal must now be to look at these objects in much more detail, and to try to determine their real properties and formation history. Comprehensive VLT study of Orion well underway This is indeed one of the main aims of the present major VLT study, of which the image shown here is decidedly a good start and a great "appetizer"! In fact, even the present photo - that is based on quite short exposures with a total of only 13.5 min at each image point (4.5 min in each of the three bands) - is already of sufficient quality to raise questions about some of the "very low-mass objects". McCaughrean acknowledges that " some of these very faint objects were right at the limit of earlier studies and hence the determination of their brightnesses was less precise. The new, more accurate VLT data show several of them to be intrinsically brighter than previously thought and thus more massive; also some other objects seem not to be there at all ". Clearly, the answer is to look even deeper in order to get more accurate data and to discover more of these objects. More infrared images were obtained for the present programme in December 2000 by the VLT team. They will now be combined with the earlier data shown here to create a very deep survey of the central area of the Orion Nebula. One of the great strengths of the VLT is its comprehensive instrumentation programme, and the team intends to carry out a detailed spectral analysis of the very faintest objects in the cluster, using the VLT VIMOS and NIRMOS multiobject spectrometers, as these become available. Only then, by analysing all these data, will it become possible to determine the masses, ages, and motions of the very faintest members of the Trapezium Cluster , and to provide a solid answer to the tantalising question of their origin. The beautiful infrared image shown here may just be a first "finding chart" made at the beginning of a long-term research project, but it already carries plenty of new astrophysical information. For the astronomers, images like these and the follow-up studies will help to solve some of the fascinating and perplexing questions about the birth and early lives of stars and their planetary systems. Note [1] The new VLT data covering the Orion Nebula and Trapezium Cluster were obtained as part of a long-term project by Mark McCaughrean (Principal Investigator, Astrophysical Institute Potsdam [AIP], Germany), João Alves (ESO, Garching, Germany), Hans Zinnecker (AIP) and Francesco Palla (Arcetri Observatory, Florence, Italy). The data also form part of the collaborative research being undertaken by the European Commission-sponsored Research Training Network on "The Formation and Evolution of Young Star Clusters" (RTN1-1999-00436), led by the Astrophysical Institute Potsdam, and including the Arcetri Observatory in Florence (Italy), the University of Cambridge (UK), the University of Cardiff (UK), the University of Grenoble (France), the University of Lisbon (Portugal) and the CEA Saclay (France). [2] To compare the present VLT infrared image with the more familiar view of the Orion Nebula in optical light, the ST-ECF has prepared an image covering a similar field from data taken with the NASA/ESA Hubble Space Telescope WFPC2 camera and extracted and processed by Jeremy Walsh from the ESO/ST-ECF archive. This 4-colour composite emphasises the light from the gaseous nebula rather than from the stars, and there is dramatic difference from the infrared view which sees much deeper into the region. The HST image is available at http://www.stecf.org/epo/support/orion/. Technical information about the photos PR Photo 03a/01 of the Orion Nebula and the Trapezium Cluster was made using the near-infrared camera ISAAC on the ESO 8.2-m VLT ANTU telescope on December 20 - 21, 1999. The full field measures approx. 7 x 7 arcmin, covering roughly 3 x 3 light-years (0.9 x 0.9 pc) at the distance of the nebula (about 1500 light-years, or 450 pc). This required a 9-position mosaic (3 x 3 grid) of ISAAC pointings; at each pointing, a series of images were taken in each of the near-infrared J s - (centred at 1.24 µm wavelength), H- (1.65 µm), and K s - (2.16 µm) bands. North is up and East left. The total integration time for each pixel in the mosaic was 4.5 min in each band. The seeing FWHM (full width at half maximum) was excellent, between 0.35 and 0.50 arcsec throughout. Point sources are detected at the 3-sigma level (central pixel above background noise) of 20.5, 19.2, and 18.8 magnitude in the J s -, H-, and K s -bands, respectively, mainly limited by the bright background emission of the nebula. After removal of instrumental signatures and the bright infrared sky background, all frames in a given band were carefully aligned and adjusted to form a seamless mosaic. The three monochromatic mosaics were then unsharp-masked and scaled logarithmically to reduce the enormous dynamic range and enhance the faint features of the outer nebula. The mosaics were then combined to create this colour-coded image, with the J s -band being rendered as blue, the H-band as green, and the K s -band as red. A total of 81 individual ISAAC images were merged to form this mosaic. PR Photos 03b-c/01 show smaller sections of the large image; the areas are 2.6 x 3.2 and 4.2 x 3.8 arcmin (1.1 x 1.4 and 1.8 x 1.6 light-years), respectively. PR Photo 03d/01 is based on J s band data only, to ensure good visibility (maximum contrast) of the Orion 114-426 silhouette disk against the background nebula. The three highest spatial resolution images covering this region were accurately aligned to form a mosaic with a resolution of 0.4 arcsec FWHM (180 Astronomical Units [AU]) in the vicinity of the disk. A 29 x 29 arcsec (0.2 x 0.2 light-year) section of this smaller mosaic was cut out and the square root of the intensity taken to enhance the disk. The disk is roughly 2 arcsec or 900 AU in diameter. North is up, East left.

A secure and robust information hiding technique for covert communication

NASA Astrophysics Data System (ADS)

Parah, S. A.; Sheikh, J. A.; Hafiz, A. M.; Bhat, G. M.

2015-08-01

The unprecedented advancement of multimedia and growth of the internet has made it possible to reproduce and distribute digital media easier and faster. This has given birth to information security issues, especially when the information pertains to national security, e-banking transactions, etc. The disguised form of encrypted data makes an adversary suspicious and increases the chance of attack. Information hiding overcomes this inherent problem of cryptographic systems and is emerging as an effective means of securing sensitive data being transmitted over insecure channels. In this paper, a secure and robust information hiding technique referred to as Intermediate Significant Bit Plane Embedding (ISBPE) is presented. The data to be embedded is scrambled and embedding is carried out using the concept of Pseudorandom Address Vector (PAV) and Complementary Address Vector (CAV) to enhance the security of the embedded data. The proposed ISBPE technique is fully immune to Least Significant Bit (LSB) removal/replacement attack. Experimental investigations reveal that the proposed technique is more robust to various image processing attacks like JPEG compression, Additive White Gaussian Noise (AWGN), low pass filtering, etc. compared to conventional LSB techniques. The various advantages offered by ISBPE technique make it a good candidate for covert communication.

HUBBLE SNAPS 'FAMILY PORTRAIT'

NASA Technical Reports Server (NTRS)

2002-01-01

The Hubble Space Telescope's Near Infrared Camera and Multi-Object Spectrometer (NICMOS) has peered into the Cone Nebula, revealing a stunning image of six baby sun-like stars surrounding their mother, a bright, massive star. Known as NGC 2264 IRS, the massive star triggered the creation of these baby stars by releasing high-speed particles of dust and gas during its formative years. The image on the left, taken in visible light by a ground-based telescope, shows the Cone Nebula, located 2,500 light-years away in the constellation Monoceros. The white box pinpoints the location of the star nursery. The nursery cannot be seen in this image because dust and gas obscure it. The large cone of cold molecular hydrogen and dust rising from the lefthand edge of the image was created by the outflow from NGC 2264 IRS. The NICMOS image on the right shows this massive star - the brightest source in the region - and the stars formed by its outflow. The baby stars are only .04 to .08 light-years away from their brilliant mother. The rings surrounding the massive star and the spikes emanating from it are not part of the image. This pattern demonstrates the near-perfect optical performance of NICMOS. A near-perfect optical system should bend light from point-like sources, such as NGC 2264 IRS, forming these diffraction patterns of rings and spikes. This false color image was taken with 1.1-, 1.6-, and 2.2-micron filters. The image was taken on April 28, 1997. Credits: Rodger Thompson, Marcia Rieke and Glenn Schneider (University of Arizona), and NASA Image files in GIF and JPEG format and captions may be accessed on the Internet via anonymous ftp from ftp.stsci.edu in /pubinfo.

JHelioviewer: Open-Source Software for Discovery and Image Access in the Petabyte Age (Invited)

NASA Astrophysics Data System (ADS)

Mueller, D.; Dimitoglou, G.; Langenberg, M.; Pagel, S.; Dau, A.; Nuhn, M.; Garcia Ortiz, J. P.; Dietert, H.; Schmidt, L.; Hughitt, V. K.; Ireland, J.; Fleck, B.

2010-12-01

The unprecedented torrent of data returned by the Solar Dynamics Observatory is both a blessing and a barrier: a blessing for making available data with significantly higher spatial and temporal resolution, but a barrier for scientists to access, browse and analyze them. With such staggering data volume, the data is bound to be accessible only from a few repositories and users will have to deal with data sets effectively immobile and practically difficult to download. From a scientist's perspective this poses three challenges: accessing, browsing and finding interesting data while avoiding the proverbial search for a needle in a haystack. To address these challenges, we have developed JHelioviewer, an open-source visualization software that lets users browse large data volumes both as still images and movies. We did so by deploying an efficient image encoding, storage, and dissemination solution using the JPEG 2000 standard. This solution enables users to access remote images at different resolution levels as a single data stream. Users can view, manipulate, pan, zoom, and overlay JPEG 2000 compressed data quickly, without severe network bandwidth penalties. Besides viewing data, the browser provides third-party metadata and event catalog integration to quickly locate data of interest, as well as an interface to the Virtual Solar Observatory to download science-quality data. As part of the Helioviewer Project, JHelioviewer offers intuitive ways to browse large amounts of heterogeneous data remotely and provides an extensible and customizable open-source platform for the scientific community.

Most Massive Spiral Galaxy Known in the Universe

NASA Astrophysics Data System (ADS)

2000-12-01

The VLT Observes Rapid Motion in Distant Object Summary The most massive spiral galaxy known so far in the Universe has been discovered by a team of astronomers from Garching, Padova, Leiden, ESO and London [1]. They base their conclusion on recent observations with ISAAC , an infrared-sensitive, multi-mode instrument on ESO's Very Large Telescope at the Paranal Observatory. This galaxy has been designated ISOHDFS 27 and is located at a distance of approx. 6 billion light-years (the redshift is 0.58). Its measured mass is more than 1000 billion times that of the Sun [2]. It is thus about four times more massive than our own galaxy, the Milky Way, and twice as heavy as the heaviest spiral galaxy known so far. The determination of the mass of ISOHDFS 27 is based on a unique measurement of the motions of its stars and nebulae around the center. The faster the motion is, the greater is the mass. It is, in essence, the same method that allows determining the mass of the Earth from the orbital speed and distance of the Moon. This is the first time a "rotation curve" has been observed in such a distant galaxy by means of infrared observations, allowing a very detailed dynamical study. Other observations by the team concern a pair of distant, interacting galaxies that were also found to possess comparably high masses. They also have observations of a third galaxy at a distance of about 10 billion light-years, with a mass that approaches that of ISOHDFS 27 . The new result has important cosmological implications, as it demonstrates that very heavy structures had already been formed in the Universe at a comparatively early epoch . PR Photo 33a/00 : ISOHDFS 27 , the heaviest spiral galaxy known. PR Photo 33b/00 : The "raw" ISAAC spectrum of ISOHDFS 27 . PR Photo 33c/00 : H-alpha profile of ISOHDFS 27 . Star formation in young galaxies It is of fundamental importance to current cosmological studies to understand how stars evolve within galaxies and how the galaxies themselves evolve into the various shapes we observe. Some are elliptical, others have the form of single or multiple spirals. Quite a few, especially smaller ones, appear to have no particular structure at all and are referred to as "irregular". With the advent of large optical/infrared telescopes like the ESO VLT, astronomers are now able to observe extremely distant objects and hence to "look back" to the time when galaxies were being formed in the young Universe. They have found it particularly useful to observe in the infrared part of the spectrum during the present search for "young galaxies". Such observations minimize the effects of dust obscuration and serve to trace the active phases of galaxy evolution , i.e. those specific periods of time when there is particularly intense star-formation in a galaxy. It is still not well known what triggers such phases of enhanced star-forming activity, but it is suspected that galaxy collisions and mergers may play an important role. The formation of stars usually takes place deep inside thick dust clouds that absorb the optical and UV light from the young stars and re-emit it in the infrared region of the spectrum. The imprints of this type of activity are thus best observed in that spectral band. Indeed, the infrared spectra of such objects have been found to undergo huge variations that relate to the related, complex processes. Infrared observations are therefore crucial for the study of these most violent episodes in the Universe. By means of detailed observations of distant galaxies, we may hope to learn how they occurred at earlier times and, in particular, how the major structures (e.g., spirals, bulges) that we now see in most galaxies were formed. Dusty Infrared-Luminous Galaxies In 1995-98, the infrared camera ISOCAM onboard the ESA Infrared Space Observatory (ISO) , with its unique imaging capabilities, provided astronomers with the first deep, overall "infrared view" of the Universe. Through various deep surveys with ISO, a new class of objects was discovered: luminous, distant galaxies detected during transient phases of enhanced infrared emission and undergoing rapid evolution with cosmic time. One of the sky areas surveyed by ISO was the Hubble Deep Field South (HDF-S) , that has also been observed with various ESO telescopes including the VLT, cf. ESO PR 20/98. The present team of astronomers decided to investigate some of the luminous galaxies that were detected by ISOCAM in the HDF-S area. Their goal was to better understand the enigmatic nature of these unsual objects and to try to learn which processes are really behind those huge amounts of energy that are emitted by these galaxies in the infrared region of the spectrum. However, all of the galaxies in HDF-S are at very large distances - several billion light-years away (i.e. with redshifts between 0.6 and 1.5) and they are rather faint. They refer to these objects as ISOHDFS galaxies and their colours are quite red. The astronomers therefore decided to use one of the most efficient astronomical infrared instruments now available, the multi-mode ISAAC on the 8.2-m VLT ANTU telescope. VLT Observations of ISOHDFS galaxies In September 1999, the team began to obtain low-resolution spectra of about one dozen of these galaxies. This initial observing run at Paranal was very successful and it provided a first clue towards the true nature of these systems. It was found, in particular, that ISOHDFS galaxies emit strongly in the H-alpha spectral line from hydrogen atoms and that this emission originates in dusty regions with intense star formation activity in these galaxies. The astronomers determined accurate redshifts (and hence, distances to the individual galaxies) by measuring the Doppler shifts of the H-alpha lines in their infrared spectra (an example of an early observation of this type is shown in ESO PR 19/98 ). Inspired by the excellent quality of these first VLT observations, they were ready to take the next, challenging step in August 2000. They now attempted to get a deeper insight into the nature and dynamical stage of the ISOHDFS galaxies, by means of measurements of the stellar masses in the nuclear regions of these objects. The spectrum of ISOHDFS 27 ESO PR Photo 33a/00 ESO PR Photo 33a/00 [Preview - JPEG: 400 x 358 pix - 74k] [Normal - JPEG: 800 x 715 pix - 240ak] [Hi-Res - JPEG: 3000 x 2683 pix - 1.8Mb] Caption : PR Photo 33a/00 is reproduced from an optical image of the distant galaxy ISOHDFS 27 , obtained with the Hubble Space Telescope (HST). The angular size of this galaxy is about 7 arcsec, corresponding to about 130,000 light-years (40 kpc) at the distance of the galaxy, approx. 6,000 million light-years. The inclination of the galaxy's main plane to the line-of-sight is about 50°. Technical information about this photo is available below. The first target for this new study was a large spiral galaxy, designated ISOHDFS 27 and of which an HST image is shown in Photo 33a/00 . The superb observing conditions at Paranal - the seeing improved to the near-record value of only 0.2 arcsec during the acquisition of these data! - made it possible to obtain the first spatially resolved, infrared H-alpha spectra of some of the ISOHDFS galaxies, allowing for the first time a probe into the dynamical stage of these distant objects. ESO PR Photo 33b/00 ESO PR Photo 33b/00 [Preview - JPEG: 400 x 322 pix - 69k] [Normal - JPEG: 800 x 643 pix - 728k] [Hi-Res - JPEG: 3000 x 2413 pix - 944k] ESO PR Photo 33c/00 ESO PR Photo 33c/00 [Preview - JPEG: 400 x 344 pix - 19k] [Normal - JPEG: 800 x 687 pix - 76k] Caption : PR Photo 33b/00 shows the "raw" spectrum of the distant galaxy ISOHDFS 27 , obtained with the ISAAC infrared instrument at the 8.2-m VLT ANTU telescope. Light from hydrogen atoms emitted in the red spectral region (the H-alpha emission line) is visible as two prominent "blobs" on either side of the central, featureless spectrum (the galaxy "continuum"). A weaker emission line from singly ionized nitrogen ([N II]) is seen to the right; it shows exactly the same behaviour. Technical information about this photo is available below. Caption : PR Photo 33c/00 shows the extracted H-alpha profile in ISOHDFS 27 , following extensive image processing of the spectrum shown in Photo 33b/00. When corrected for the inclination of the galaxy (50°), the peak-to-peak velocity difference is about 830 km/sec, corresponding to a rotational velocity of about 415 km/sec. This is about three times more than what is typical for normal spiral galaxies and hence indicates a very large mass. Photo 33b/00 shows the "raw" ISAAC spectrum, i.e. the image of the spectrum as seen in the read-out from the detector. The derived spectral profile of the H-alpha line is shown in Photo 33c/00 . The shape is very unusual and implies that the emitting region is probably not concentrated at the centre of the galaxy, but most likely has a disk-like structure. Taking into account the inclination of the galaxy (50°), the difference in velocity between the two peaks is 830 km/sec, i.e. the rotational velocity is half of that, 415 km/sec, or significantly more than what is measured in normal spiral galaxies. This was an interesting start for an ambitious project. But the astronomers got really excited when they made the first estimate of the total mass of that galaxy. "I can't believe it, this spiral galaxy is really massive!" , said Dimitra Rigopoulou from the Garching team. And she added: "With an estimated mass of 10 12 times that of our Sun and 4 times the mass of our own Galaxy, it seems to be the most massive spiral galaxy found so far in the Universe!" Indeed, careful calculations later showed that a total mass of 1.04 10 12 solar masses is present within 4 arcsec of the central region of (an area of 8 arcsec across), corresponding to 100,000 light-years (40 kpc) in ISOHDFS 27 . This is enormous by all standards [3]. The baryonic mass which corresponds to the mass in the older stars and is estimated from the infrared spectrum, is found to be 6 x10 11 solar masses, about half the dynamical mass. During the same observing run, two other ISO-detected infrared sources were observed. One turned out to be a system of two counter-rotating galaxies with masses of about 2 x 10 11 solar masses and the other an even more distant galaxy (about 12 billion light-years) with comparably high mass. Implications and Future Plans The present programme is a fine illustration of the importance of "collaboration" between space- and ground-based telescopes. While the galaxies were first found with ISO and HST, it took the enormous light-gathering capability of the VLT to obtain a detailed spectrum and measure their masses. Clearly, these exciting results have important implications for future studies of formation and evolution of galaxies, as well as the origin of the IR background. The discovery of such massive spiral galaxies at very large distances implies that enormous structures were in place in the Universe, already some 6 billion years ago. Galaxies like ISOHDFS 27 which are strongly emitting in the infrared region of the spectrum are presumed to contribute significantly to the observed infrared background radiation. Consequently, these new observations imply that the infrared background is largely made up of massive galaxies with recent star formation activity. The team now plans to continue its work on the determination of the dynamical status of other high-redshift galaxies. These studies are indeed very timely since a plethora of future space- and ground-based missions such as NGST, SIRTF, FIRST and ALMA will be able to perform even more detailed follow-up observations of these objects. The present observations open a new and exciting era in the study of the formation of galaxies in the young Universe. Notes [1]: The project on exploring the dynamical stage of ISO-detected galaxies in the Hubble Deep Field South is being carried out by a large international collaboration led by astronomers from the Max-Planck-Institut für Extraterrestrische Physik (MPE) in Garching (Germany) and the Padova University (Italy). Besides Dimitra Rigopoulou and Alberto Franceschini , the team includes Herve Aussel (Padova), Catherine Cesarsky (ESO), Reinhard Genzel (MPE), David Elbaz (Saclay, France), Michael Rowan-Robinson (IC, UK), Niranjan Thatte (MPE), and Paul van der Werf (Leiden, The Netherlands). [2]: 1 billion = 1,000 million = 10 9. [3]: Some other distant spiral galaxies have been found with masses in the range of 1 - 5 x 10 11 solar masses. The heaviest spiral galaxy known until now is UGC 12591 , with a measured mass of 6 x10 11 solar masses. Technical information about the photos PR Photo 33a/00 covers an area of approx. 7 x 8 arcsec 2 ; North is up, East is to the left. The present results, including the spectrum shown in PR Photo 33b/00 , are based on observations that were collected in visitor mode during August 18-20, 2000. For these observations, ISAAC was used in medium resolution mode (R ~ 5000) with a slit of 0.6 arcsec x 2 arcmin. The pixel scale is 0.146 arcsec/pix. The wavelength for the H-alpha is 1.0370 µm and the SZ band was used for the observations. The seeing was very good throughout the run (from 0.2 - 0.9 arcsec). The spectrum shown in PR Photo 33b/00 was acquired under 0.2 arcsec seeing.

VLT Data Flow System Begins Operation

NASA Astrophysics Data System (ADS)

1999-06-01

Building a Terabyte Archive at the ESO Headquarters The ESO Very Large Telescope (VLT) is the sum of many sophisticated parts. The site at Cerro Paranal in the dry Atacama desert in Northern Chile is one of the best locations for astronomical observations from the surface of the Earth. Each of the four 8.2-m telescopes is a technological marvel with self-adjusting optics placed in a gigantic mechanical structure of the utmost precision, continuously controlled by advanced soft- and hardware. A multitude of extremely complex instruments with sensitive detectors capture the faint light from distant objects in the Universe and record the digital data fast and efficiently as images and spectra, with a minimum of induced noise. And now the next crucial link in this chain is in place. A few nights ago, following an extended test period, the VLT Data Flow System began providing the astronomers with a steady stream of high-quality, calibrated image and spectral data, ready to be interpreted. The VLT project has entered into a new phase with a larger degree of automation. Indeed, the first 8.2-m Unit Telescope, ANTU, with the FORS1 and ISAAC instruments, has now become a true astronomy machine . A smooth flow of data through the entire system ESO PR Photo 25a/99 ESO PR Photo 25a/99 [Preview - JPEG: 400 x 292 pix - 104k] [Normal - JPEG: 800 x 584 pix - 264k] [High-Res - JPEG: 3000 x 2189 pix - 1.5M] Caption to ESO PR Photo 25a/99 : Simplified flow diagramme for the VLT Data Flow System . It is a closed-loop software system which incorporates various subsystems that track the flow of data all the way from the submission of proposals to storage of the acquired data in the VLT Science Archive Facility. The DFS main components are: Program Handling, Observation Handling, Telescope Control System, Science Archive, Pipeline and Quality Control. Arrows indicate lines of feedback. Already from the start of this project more than ten years ago, the ESO Very Large Telescope was conceived as a complex digital facility to explore the Universe. In order for astronomers to be able to use this marvellous research tool in the most efficient manner possible, the VLT computer software and hardware systems must guarantee a smooth flow of scientific information through the entire system. This process starts when the astronomers submit well-considered proposals for observing time and it ends with large volumes of valuable astronomical data being distributed to the international astronomical community. For this, ESO has produced an integrated collection of software and hardware, known as the VLT Data Flow System (DFS) , that manages and facilitates the flow of scientific information within the VLT Observatory. Early information about this new concept was published as ESO Press Release 12/96 and extensive tests were first carried out at ESOs 3.5-m New Technology Telescope (NTT) at La Silla, cf. ESO Press Release 03/97 [1]. The VLT DFS is a complete (end-to-end) system that guarantees the highest data quality by optimization of the observing process and repeated checks that identify and eliminate any problems. It also introduces automatic calibration of the data, i.e. the removal of external effects introduced by the atmospheric conditions at the time of the observations, as well as the momentary state of the telescope and the instruments. From Proposals to Observations In order to obtain observing time with ESO telescopes, also with the VLT, astronomers must submit a detailed observing proposal to the ESO Observing Programmes Committee (OPC) . It meets twice a year and ranks the proposals according to scientific merit. More than 1000 proposals are submitted each year, mostly by astronomers from the ESO members states and Chile; the competition is fierce and only a fraction of the total demand for observing time can be fulfilled. During the submission of observing proposals, DFS software tools available over the World Wide Web enable the astronomers to simulate their proposed observations and provide accurate estimates of the amount of telescope time they will need to complete their particular scientific programme. Once the proposals have been reviewed by the OPC and telescope time is awarded by the ESO management according to the recommendation by this Committee, the successful astronomers begin to assemble detailed descriptions of their intended observations (e.g. position in the sky, time and duration of the observation, the instrument mode, etc.) in the form of computer files called Observation Blocks (OBs) . The software to make OBs is distributed by ESO and used by the astronomers at their home institutions to design their observing programs well before the observations are scheduled at the telescope. The OBs can then be directly executed by the VLT and result in an increased efficiency in the collection of raw data (images, spectra) from the science instruments on the VLT. The activation (execution) of OBs can be done by the astronomer at the telescope on a particular set of dates ( visitor mode operation) or it can be done by ESO science operations astronomers at times which are optimally suited for the particular scientific programme ( service mode operation). An enormous VLT Data Archive ESO PR Photo 25b/99 ESO PR Photo 25b/99 [Preview - JPEG: 400 x 465 pix - 160k] [Normal - JPEG: 800 x 929 pix - 568k] [High-Res - JPEG: 3000 x 3483 pix - 5.5M] Caption to ESO PR Photo 25b/99 : The first of several DVD storage robot at the VLT Data Archive at the ESO headquarters include 1100 DVDs (with a total capacity of about 16 Terabytes) that may be rapidly accessed by the archive software system, ensuring fast availbility of the requested data. The raw data generated at the telescope are stored by an archive system that sends these data regularly back to ESO headquarters in Garching (Germany) in the form of CD and DVD ROM disks. While the well-known Compact Disks (CD ROMs) store about 600 Megabytes (600,000,000 bytes) each, the new Digital Versatile Disks (DVD ROMs) - of the same physical size - can store up 3.9 Gigabytes (3,900,000,000 bytes) each, or over 6 times more. The VLT will eventually produce more than 20 Gigabytes (20,000,000,000 bytes) of astronomical data every night, corresponding to about 10 million pages of text [2]. Some of these data also pass through "software pipelines" that automatically remove the instrumental effects on the data and deliver data products to the astronomer that can more readily be turned into scientific results. Ultimately these data are stored in a permanent Science Archive Facility at ESO headquarters which is jointly operated by ESO and the Space Telescope European Coordinating Facility (ST-ECF). From here, data are distributed to astronomers on CD ROMs and over the World Wide Web. The archive facility is being developed to enable astronomers to "mine" the large volumes of data that will be collected from the VLT in the coming years. Within the first five years of operations the VLT is expected to produce around 100 Terabytes (100,000,000,000,000 bytes) of data. It is difficult to visualize this enormous amount of information. However, it corresponds to the content of 50 million books of 1000 pages each; they would occupy some 2,500 kilometres of bookshelves! The VLT Data Flow System enters into operation ESO PR Photo 25c/99 ESO PR Photo 25c/99 [Preview - JPEG: 400 x 444 pix - 164k] [Normal - JPEG: 800 x 887 pix - 552k] [High-Res - JPEG: 3000 x 3327 pix - 6.4M] Caption to ESO PR Photo 25c/99 : Astronomers from ESO Data Flow Operations Group at work with the VLT Archive. Science operations with the first VLT 8.2-m telescope ( ANTU ) began on April 1, 1999. Following the first call for proposals to use the VLT in October 1998, the OPC met in December and the observing schedule was finalized early 1999. The related Observation Blocks were prepared by the astronomers in February and March. Service-mode observations began in April and by late May the first scientific programs conducted by ESO science operations were completed. Raw data, instrument calibration information and the products of pipeline processing from these programs have now been assembled and packed onto CD ROMs by ESO science operations staff. On June 15 the first CD ROMs were delivered to astronomers in the ESO community. This event marks the closing of the data flow loop at the VLT for the first time and the successful culmination of more than 5 years of hard work by ESO engineers and scientists to implement a system for efficient and effective scientific data flow. This was achieved by a cross-organization science operations team involving staff in Chile and Europe. With the VLT Data Flow System, a wider research community will have access to the enormous wealth of data from the VLT. It will help astronomers to keep pace with the new technologies and extensive capabilities of the VLT and so obtain world-first scientific results and new insights into the universe. Notes [1] A more technical description of the VLT Data Flow System is available in Chapter 10 of the VLT Whitebook. [2] By definition, one "normal printed page" contains 2,000 characters. How to obtain ESO Press Information ESO Press Information is made available on the World-Wide Web (URL: http://www.eso.org../ ). ESO Press Photos may be reproduced, if credit is given to the European Southern Observatory.

Catching a Falling Star

NASA Astrophysics Data System (ADS)

2004-07-01

ESO's Very Large Telescope Obtains Unique Spectrum of a Meteor Summary While observing a supernova in a distant galaxy with the FORS instrument on ESO's Very Large Telescope at the Paranal Observatory (Chile), astronomers were incredibly lucky to obtain serendipitously a high quality spectrum of a very large meteor in the terrestrial atmosphere. The VLT spectrograph provided a well calibrated spectrum, making it a reference in this field of research. From this spectrum, the temperature of the meteor trail was estimated to be about 4600 degrees centigrade. The serendipitous spectrum reveals the telltale meteor emissions of oxygen and nitrogen atoms and nitrogen molecules. The VLT spectrum was the first to reveal the far red range where carbon emission lines are predicted; the absence of the lines puts constraints on the role of atmospheric chemistry when life started on earth. Because the VLT is tuned to observe objects far out in space, it focuses at infinity. The meteor, being "only" 100 km above the telescope, therefore appears out of focus in the field of view. PR Photo 22a/04: Meteor Caught in the Act (MASCOT) PR Photo 22b/04: Spectrum of a Meteor (FORS1/VLT) PR Photo 22c/04: Details of the Meteor Spectrum (FORS1/VLT) Astronomers' luck ESO PR Photo 22a/04 ESO PR Photo 22a/04 Meteor Caught in the Act (MASCOT) [Preview - JPEG: 426 x 400 pix - 85k] [Normal - JPEG: 851 x 800 pix - 187k] [Full Res - JPEG: 2567 x 2413 pix - 908k] Captions: ESO PR Photo 22a/04 shows the trail of a bright meteor, photographed by the Mini All-Sky Cloud Observation Tool (MASCOT) at the ESO Paranal Observatory. MASCOT consists of a small CCD camera behind a fish-eye objective. It typically takes 90s exposures every 3 minutes and helps astronomers inside the VLT Control Room to keep an eye on the sky. The main purpose of MASCOT is to monitor the clouds over Paranal but it also observes from time to time serendipitous events like meteor showers, atmospheric phenomena, artificial satellites, etc. This image was obtained by MASCOT on August 25, 2002 and shows a meteor caught in the act. (Note that this is not the meteor whose spectrum was recorded). The Milky Way is also clearly visible in the centre. A popular saying states that when you see a meteor, you may make a wish. While astronomers cannot promise that it will be realised, a team of astronomers [1] have indeed seen a dream come true! On May 12, 2002, they were lucky to record the spectrum of a bright meteor when it happened - by sheer chance and against all reasonable odds - to cross the narrow slit of the FORS1 instrument on the ESO Very Large Telescope. At the time of this unlikely event, the telescope was performing a series of 20-minute spectroscopic exposures of a supernova in a distant galaxy in order to establish constraints on the dark energy content of the Universe (see e.g. ESO PR 21/98). Thanks to its enormous light-collecting and magnifying power, the VLT recorded the spectrum of the meteor trail perpendicular to its path on one of these exposures. "We really hit the jackpot", says ESO astronomer Emmanuel Jehin: "Chances of capturing a meteor in the narrow slit of the FORS1 spectrograph are about as big as for me winning the national lottery." Meteor spectra have on occasion been obtained serendipitously during photographic star spectra surveys. But this is now maybe the only meteor spectrum recorded with a large telescope and a modern spectrograph. The spectrum covers the wavelength range from 637 to 1050 nm, which is dominated by emissions from air atoms and molecules in the meteor path and teach us about the collision processes in the wake of a meteoroid. The rapid motion of the meteor across the sky resulted in a very brief exposure while crossing the narrow spectrograph slit - only 1/50 of a millisecond! - and despite the relative brightness of the meteor it was only thanks to the VLT's great light-gathering power that any record was procured. The meteor was estimated at magnitude -8, or nearly as bright as the first-quarter Moon. Although it is not possible to be sure from which shower this meteor belongs, a possible candidate is the Southern May Ophiuchid shower which appears from a direction just east of the bright star Antares. The shower contributes only one or two meteors per hour but was one of the stronger showers of that night. Telltale emissions ESO PR Photo 22b/04 ESO PR Photo 22b/04 Spectrum of a Meteor (FORS1/VLT) [Preview - JPEG: 426 x 400 pix - 91k] [Normal - JPEG: 851 x 800 pix - 232k] [Full Res - JPEG: 2567 x 2413 pix - 2.1M] ESO PR Photo 22c/04 ESO PR Photo 22c/04 Details of the Meteor Spectrum (FORS1/VLT) [Preview - JPEG: 1006 x 400 pix - 122k] [Normal - JPEG: 2011 x 800 pix - 236k] [Full Res - JPEG: 3414 x 1358 pix - 957k] Captions: ESO PR Photo 22b/04 shows the spectrum of a bright meteor, as observed serendipitously by the multi-mode FORS 1 instrument on the ESO Very Large Telescope during the night of May 12-13, 2002, in front of a photo of the VLT enclosures and with a meteor trail inserted in the sky (montage). The position of the meteor trail on the narrow slit of FORS (not to scale) is also indicated. The lower panel shows the spectrum of the meteor, following removal of the supernova spectrum and before (up) and after (down) removal of the spectrum of the night sky by image processing. Several emission lines from colliding Oxygen and Nitrogen atoms (sharp emissions) and molecules (broad emissions) are visible. ESO PR Photo 22c/04 illustrates details of the extracted VLT meteor spectrum (solid line): the intensity (in arbitrary units) is shown as a function of the wavelength. The dashed line is a theoretical model of the spectrum of air heated to a temperature of 4600 degrees at an altitude of 95 km. "At first, the bright trace across the supernova spectrum was a puzzle, but then I realized that the spectroscopic signature was that of our atmosphere being bombarded," says astronomer Remi Cabanac of the Catholic University of Santiago de Chile. "We asked around to see if others in our country had witnessed the meteor, but it seems we at the VLT were the only ones, perhaps not too surprising as Paranal is located in the middle of the empty desert." And unfortunately for the astronomers, the MASCOT all-sky camera (e.g. PR Photo 22a/04) was not yet in operation at that time. The VLT spectrograph provided a well calibrated spectrum of the meteor emission, making it a reference in this field of research. The meteor emission results from collisions between air molecules, knocked to high speeds after initial collision with the meteoroid. Closer inspection of the spectrum revealed about 20 telltale meteor emissions of oxygen and nitrogen atoms and nitrogen molecules (see PR Photo 22b/04 and 22c/04). The ratio of atomic and molecular emissions could be used as a "thermometer" to measure the conditions in the meteor-induced hot gas in the wake of the meteoroid, by means of laboratory measurements and meteor models that calibrate the VLT data. From here to infinity "To our surprise, we found the meteor trail to be wider than expected and also that the meteor's heat appeared evenly distributed in the trail, with the temperature varying only from about 4,570 to 4,650 degrees across the trail," says meteor specialist, astronomer Peter Jenniskens of the SETI Intitute, who analysed the data together with Christophe Laux of the Ecole Centrale Paris (France) and Iain Boyd of the University of Michigan at Ann Arbor (USA). "We later realised that this was due to the fact that, as seen by the VLT, the meteor trail was out of focus, even though it was 100 kilometres away!" The VLT is indeed focussed at infinity, which is perfect for most astronomical objects that it routinely observes. But not for meteoroids entering the atmosphere above Paranal. A point at 100 kilometres distance will appear as a small circle of diameter 15 arcsec at the VLT focal plane. This corresponds to roughly half of the maximum apparent diameter of Mars in the evening sky! It is the same effect as when you try to photograph your children with a forest in the background. If you focus your camera on the distant forest, then (in most cases) your children will be out of focus. Or to put this in another way, the VLT is clearly not very suited to observe ships passing by on the Pacific Ocean, just 12 km from Paranal! No Trace of Carbon The meteor spectrum also provided a first view of such an object in the near-infrared window between wavelengths 900 and 1050 nm. This spectral region contains relatively strong lines of atomic carbon, but no such emissions were detected. "We calculated that these lines should have been visible if all atmospheric carbon dioxide in the meteor path was dissociated into carbon and oxygen atoms," says Jenniskens, "but they were conspicuously absent". This observation is important because it sets new constraints on the efficiency of meteor-induced atmospheric chemistry at the time when life began on our planet. Appendix: Cosmic showers Meteoroids are small grains of rocks orbiting the Sun. Far smaller than asteroids, they make their presence known to us in a dramatic and beautiful way when they enter earth's atmosphere and burn up, producing a short glowing trail in the night sky, rarely lasting more than a second or two - a meteor. Most meteoroids are completely destroyed at altitudes between 80 and 110 km, but some of the bigger ones make it to the ground. Here they may be collected as meteorites. Many meteoroids originate as fragments of asteroids and appear to be unaltered since the formation of the Solar System, some 4500 million years ago. Based on the peculiar composition of some meteorites, we know that a small fraction of meteoroids originate from the Moon, Mars or the large asteroid Vesta. They obviously result from major impacts on these bodies which blasted rock fragments into space. These fragments then orbit the Sun and may eventually collide with the Earth. Comets are another important source of meteoroids and perhaps the most spectacular. After many visits near the Sun, a comet "dirty-snowball" nucleus of ice and dust decays and fragments, leaving a trail of meteoroids along its orbit. Some "meteoroid streams" cross the earth's orbit and when our planet passes through them, some of these particles will enter the atmosphere. The outcome is a meteor shower - the most famous being the "Perseids" in the month of August [2] and the "Leonids" in November. Thus, although meteors are referred to as "shooting" or "falling stars" in many languages, they are of a very different nature. More information The research presented in this paper is published in the journal Meteoritics and Planetary Science, Vol. 39, Nr. 4, p. 1, 2004 ("Spectroscopic anatomy of a meteor trail cross section with the ESO Very Large Telescope", by P. Jenniskens et al.). Notes [1] The team is composed of Peter Jenniskens (SETI Institute, USA), Emmanuël Jehin (ESO), Remi Cabanac (Pontificia Universidad Catolica de Chile), Christophe Laux (Ecole Centrale de Paris, France), and Iain Boyd (University of Michigan, USA). [2] The maximum of the Perseids is expected on August 12 after sunset and should be easily seen.

The Small Bodies Imager Browser --- finding asteroid and comet images without pain

NASA Astrophysics Data System (ADS)

Palmer, E.; Sykes, M.; Davis, D.; Neese, C.

2014-07-01

To facilitate accessing and downloading spatially resolved imagery of asteroids and comets in the NASA Planetary Data System (PDS), we have created the Small Bodies Image Browser. It is a HTML5 webpage that runs inside a standard web browser needing no installation (http://sbn.psi.edu/sbib/). The volume of data returned by spacecraft missions has grown substantially over the last decade. While this wealth of data provides scientists with ample support for research, it has greatly increased the difficulty of managing, accessing and processing these data. Further, the complexity necessary for a long-term archive results in an architecture that is efficient for computers, but not user friendly. The Small Bodies Image Browser (SBIB) is tied into the PDS archive of the Small Bodies Asteroid Subnode hosted at the Planetary Science Institute [1]. Currently, the tool contains the entire repository of the Dawn mission's encounter with Vesta [2], and we will be adding other datasets in the future. For Vesta, this includes both the level 1A and 1B images for the Framing Camera (FC) and the level 1B spectral cubes from the Visual and Infrared (VIR) spectrometer, providing over 30,000 individual images. A key strength of the tool is providing quick and easy access of these data. The tool allows for searches based on clicking on a map or typing in coordinates. The SBIB can show an entire mission phase (such as cycle 7 of the Low Altitude Mapping Orbit) and the associated footprints, as well as search by image name. It can focus the search by mission phase, resolution or instrument. Imagery archived in the PDS are generally provided by missions in a single or narrow range of formats. To enhance the value and usability of this data to researchers, SBIB makes these available in these original formats as well as PNG, JPEG and ArcGIS compatible ISIS cubes [3]. Additionally, we provide header files for the VIR cubes so they can be read into ENVI without additional processing. Finally, we also provide both camera-based and map-projected products with geometric data embedded for use within ArcGIS and ISIS. We use the Gaskell shape model for terrain projections [4]. There are several other outstanding data analysis tools that have access to asteroid and comet data: JAsteroid (a derivative of JMARS [5]) and the Applied Physics Laboratory's Small Body Mapping Tool [6]. The SBIB has specifically focused on providing data in the easiest manner possible rather than trying to be an analytical tool.

Using applet-servlet communication for optimizing window, level and crop for DICOM to JPEG conversion.

PubMed

Kamauu, Aaron W C; DuVall, Scott L; Wiggins, Richard H; Avrin, David E

2008-09-01

In the creation of interesting radiological cases in a digital teaching file, it is necessary to adjust the window and level settings of an image to effectively display the educational focus. The web-based applet described in this paper presents an effective solution for real-time window and level adjustments without leaving the picture archiving and communications system workstation. Optimized images are created, as user-defined parameters are passed between the applet and a servlet on the Health Insurance Portability and Accountability Act-compliant teaching file server.

Sedimentological and radiochemical characteristics of marsh deposits from Assateague Island and the adjacent vicinity, Maryland and Virginia, following Hurricane Sandy

USGS Publications Warehouse

Smith, Christopher G.; Marot, Marci E.; Ellis, Alisha M.; Wheaton, Cathryn J.; Bernier, Julie C.; Adams, C. Scott

2015-09-15

This report serves as an archive for sedimentological and radiochemical data derived from the surface sediments and marsh cores collected March 26–April 4, 2014. Select surficial data are available for the additional sampling periods October 21–30, 2014. Downloadable data are available as Excel spreadsheets and as JPEG files. Additional files include: Field documentation, x-radiographs, photographs, detailed results of sediment grain size analyses, and formal Federal Geographic Data Committee metadata (data downloads).

Evaluating the potential effects of hurricanes on long-term sediment accumulation in two micro-tidal sub-estuaries: Barnegat Bay and Little Egg Harbor, New Jersey, U.S.A.

USGS Publications Warehouse

Marot, Marci E.; Smith, Christopher G.; Ellis, Alisha M.; Wheaton, Cathryn J.

2016-06-23

This report serves as an archive for sedimentological and radiochemical data derived from the surface sediments and box cores. Downloadable data are available as Excel spreadsheets, PDF files, and JPEG files, and include sediment core data plots and x-radiographs, as well as physical-properties, grain-size, alpha-spectroscopy, and gamma-spectroscopy data. Federal Geographic Data Committee metadata are available for analytical datasets in the data downloads page of this report.

Demonstration of Inexact Computing Implemented in the JPEG Compression Algorithm using Probabilistic Boolean Logic applied to CMOS Components

DTIC Science & Technology

2015-12-24

Ripple-Carry RCA Ripple-Carry Adder RF Radio Frequency RMS Root-Mean-Square SEU Single Event Upset SIPI Signal and Image Processing Institute SNR...correctness, where 0.5 < p < 1, and a probability (1−p) of error. Errors could be caused by noise, radio frequency (RF) interference, crosstalk...utilized in the Apollo Guidance Computer is the three input NOR Gate. . . At the time that the decision was made to use in- 11 tegrated circuits, the

Demonstration of Inexact Computing Implemented in the JPEG Compression Algorithm Using Probabilistic Boolean Logic Applied to CMOS Components

DTIC Science & Technology

2015-12-24

Ripple-Carry RCA Ripple-Carry Adder RF Radio Frequency RMS Root-Mean-Square SEU Single Event Upset SIPI Signal and Image Processing Institute SNR...correctness, where 0.5 < p < 1, and a probability (1−p) of error. Errors could be caused by noise, radio frequency (RF) interference, crosstalk...utilized in the Apollo Guidance Computer is the three input NOR Gate. . . At the time that the decision was made to use in- 11 tegrated circuits, the

Using Photo Story Lectures in an Online Astronomy Class

NASA Astrophysics Data System (ADS)

Caffey, James F.

2008-05-01

Photo Story is a free program from Microsoft that was designed to allow people to make videos from photos and add a voice narration to it. I use Photo Story to create video lectures in my online Astronomy class at Drury University in Springfield, Missouri. I take power point slides from my publisher, turn them into JPEG files, and add my voice over them to create the video lecture. Students at a distance say the lectures make them feel like they are back in the classroom. I will present several lectures.

Digitizing the KSO white light images

NASA Astrophysics Data System (ADS)

Pötzi, W.

From 1989 up to 2007 the Sun was observed at the Kanzelhöhe Observatory in white light on photographic film material. The images are on transparent sheet films and are not available to the scientific community now. With a photo scanner for transparent film material the films are now scanned and then prepared for scientific use. The programs for post processing are already finished and as an output FITS and JPEG-files are produced. The scanning should be finished end of 2011 and the data should then be available via our homepage.

Optimized atom position and coefficient coding for matching pursuit-based image compression.

PubMed

Shoa, Alireza; Shirani, Shahram

2009-12-01

In this paper, we propose a new encoding algorithm for matching pursuit image coding. We show that coding performance is improved when correlations between atom positions and atom coefficients are both used in encoding. We find the optimum tradeoff between efficient atom position coding and efficient atom coefficient coding and optimize the encoder parameters. Our proposed algorithm outperforms the existing coding algorithms designed for matching pursuit image coding. Additionally, we show that our algorithm results in better rate distortion performance than JPEG 2000 at low bit rates.

Surprise Discovery of Highly Developed Structure in the Young Universe

NASA Astrophysics Data System (ADS)

2005-03-01

ESO-VLT and ESA XMM-Newton Together Discover Earliest Massive Cluster of Galaxies Known Summary Combining observations with ESO's Very Large Telescope and ESA's XMM-Newton X-ray observatory, astronomers have discovered the most distant, very massive structure in the Universe known so far. It is a remote cluster of galaxies that is found to weigh as much as several thousand galaxies like our own Milky Way and is located no less than 9,000 million light-years away. The VLT images reveal that it contains reddish and elliptical, i.e. old, galaxies. Interestingly, the cluster itself appears to be in a very advanced state of development. It must therefore have formed when the Universe was less than one third of its present age. The discovery of such a complex and mature structure so early in the history of the Universe is highly surprising. Indeed, until recently it would even have been deemed impossible. PR Photo 05a/05: Discovery X-Ray Image of the Distant Cluster (ESA XMM-Netwon) PR Photo 05b/05: False Colour Image of XMMU J2235.3-2557 (FORS/VLT and ESA XMM-Newton) Serendipitous discovery ESO PR Photo 05a/05 ESO PR Photo 05a/05 Discovery X-Ray Image of the Distant Cluster (ESA XMM-Newton) [Preview - JPEG: 400 x 421 pix - 106k] [Normal - JPEG: 800 x 842 pix - 843k] [Full Res - JPEG: 2149 x 2262 pix - 2.5M] Caption: ESO PR Photo 05a/05 is a reproduction of the XMM-Newton observations of the nearby active galaxy NGC7314 (bright object in the centre) from which the newly found distant cluster (white box) was serendipitously identified. The circular field-of-view of XMM-Newton is half-a-degree in diameter, or about the same angular size as the Full Moon. The inset shows the diffuse X-ray emission from the distant cluster XMMU J2235.3-2557. Clusters of galaxies are gigantic structures containing hundreds to thousands of galaxies. They are the fundamental building blocks of the Universe and their study thus provides unique information about the underlying architecture of the Universe as a whole. About one-fifth of the optically invisible mass of a cluster is in the form of a diffuse, very hot gas with a temperature of several tens of millions of degrees. This gas emits powerful X-ray radiation and clusters of galaxies are therefore best discovered by means of X-ray satellites (cf. ESO PR 18/03 and 15/04). It is for this reason that a team of astronomers [1] has initiated a search for distant, X-ray luminous clusters "lying dormant" in archive data from ESA's XMM-Newton satellite observatory. Studying XMM-Newton observations targeted at the nearby active galaxy NGC 7314, the astronomers found evidence of a galaxy cluster in the background, far out in space. This source, now named XMMU J2235.3-2557, appeared extended and very faint: no more than 280 X-ray photons were detected over the entire 12 hour-long observations. A Mature Cluster at Redshift 1.4 ESO PR Photo 05b/05 ESO PR Photo 05b/05 False Colour Image of XMMU J2235.3-2557 (FORS/VLT and ESA XMM-Newton) [Preview - JPEG: 400 x 455 pix - 50k] [Normal - JPEG: 800 x 909 pix - 564k] [Full Res - JPEG: 1599 x 1816 pix - 1.5M] Caption: ESO PR Photo 05b/05 is a false colour image of the XMMU J2235.3-2557 cluster of galaxies, overlaid with the X-ray intensity contours derived from the ESA XMM-Newton data. The red channel is a VLT-ISAAC image (exposure time: 1 hour) obtained in the near-infrared Ks-band (at wavelength 2.2 microns); the green channel is a VLT-FORS2 z-band image (910 nm; 480 sec); the blue channel is a VLT-FORS2 R-band image (; 657 nm; 1140 sec). The VLT reveals 12 reddish galaxies, of elliptical types, as members of the cluster. Knowing where to look, the astronomers then used the European Southern Observatory's Very Large Telescope (VLT) at Paranal (Chile) to obtain images in the visible wavelength region. They confirmed the nature of this cluster and it was possible to identify 12 comparatively bright member galaxies on the images (see ESO PR Photo 05b/05). The galaxies appear reddish and are of the elliptical type. They are full of old, red stars. All of this indicates that these galaxies are already several thousand million years old. Moreover, the cluster itself has a largely spherical shape, also a sign that it is already a very mature structure. In order to determine the distance of the cluster - and hence its age - Christopher Mullis, former European Southern Observatory post-doctoral fellow and now at the University of Michigan in the USA, and his colleagues used again the VLT, now in the spectroscopic mode. By means of one of the FORS multi-mode instruments, the astronomers zoomed-in on the individual galaxies in the field, taking spectral measurements that reveal their overall characteristics, in particular their redshift and hence, distance [2]. The FORS instruments are among the most efficient and versatile available anywhere for this delicate work, obtaining on the average quite detailed spectra of 30 or more galaxies at a time. The VLT data measured the redshift of this cluster as 1.4, indicating a distance of 9,000 million light-years, 500 million light years farther out than the previous record holding cluster. This means that the present cluster must have formed when the Universe was less than one third of its present age. The Universe is now believed to be 13,700 million years old. "We are quite surprised to see that a fully-fledged structure like this could exist at such an early epoch," says Christopher Mullis. "We see an entire network of stars and galaxies in place, just a few thousand million years after the Big Bang". "We seem to have underestimated how quickly the early Universe matured into its present-day state," adds Piero Rosati of ESO, another member of the team. "The Universe did grow up fast!" Towards a Larger Sample This discovery was relative easy to make, once the space-based XMM and the ground-based VLT observations were combined. As an impressive result of the present pilot programme that is specifically focused on the identification of very distant galaxy clusters, it makes the astronomers very optimistic about their future searches. The team is now carrying out detailed follow-up observations both from ground- and space-based observatories. They hope to find many more exceedingly distant clusters, which would then allow them to test competing theories of the formation and evolution of such large structures. "This discovery encourages us to search for additional distant clusters by means of this very efficient technique," says Axel Schwope, team leader at the Astrophysical Institute Potsdam (Germany) and responsible for the source detection from the XMM-Newton archival data. Hans Böhringer of the Max Planck Institute for Extraterrestrial Physics (MPE) in Garching, another member of the team, adds: "Our result also confirms the great promise inherent in other facilities to come, such as APEX (Atacama Pathfinder Experiment) at Chajnantor, the site of the future Atacama Large Millimeter Array. These intense searches will ultimately place strong constraints on some of the most fundamental properties of the Universe." More information This finding is presented today by Christopher Mullis at a scientific meeting in Kona, Hawaii, entitled "The Future of Cosmology with Clusters of Galaxies". It will also soon appear in The Astrophysical Journal ("Discovery of an X-ray Luminous Galaxy Cluster at z=1.4", by C. R. Mullis et al.). More images and information is available on Christopher Mullis' dedicated web page at http://www.astro.lsa.umich.edu/~cmullis/research/xmmuj2235/. A German version of the press release is issued by the Max Planck Society and is available at http://www.mpg.de/bilderBerichteDokumente/dokumentation/pressemitteilungen/2005/pressemitteilung20050228/presselogin/ .

Young and Waltzing Binary Stars

NASA Astrophysics Data System (ADS)

2001-10-01

ADONIS Observes Low-mass Eclipsing System in Orion Summary A series of very detailed images of a binary system of two young stars have been combined into a movie . In merely 3 days, the stars swing around each other. As seen from the earth, they pass in front of each other twice during a full revolution, producing eclipses during which their combined brightness diminishes . A careful analysis of the orbital motions has now made it possible to deduce the masses of the two dancing stars . Both turn out to be about as heavy as our Sun. But while the Sun is about 4500 million years old, these two stars are still in their infancy. They are located some 1500 light-years away in the Orion star-forming region and they probably formed just 10 million years ago . This is the first time such an accurate determination of the stellar masses could be achieved for a young binary system of low-mass stars . The new result provides an important piece of information for our current understanding of how young stars evolve. The observations were obtained by a team of astronomers from Italy and ESO [1] using the ADaptive Optics Near Infrared System (ADONIS) on the 3.6-m telescope at the ESO La Silla Observatory. PR Photo 29a/01 : The RXJ 0529.4+0041 system before primary eclipse PR Photo 29b/01 : The RXJ 0529.4+0041 system at mid-primary eclipse PR Photo 29c/01 : The RXJ 0529.4+0041 system after primary eclipse PR Photo 29d/01 : The RXJ 0529.4+0041 system before secondary eclipse PR Photo 29e/01 : The RXJ 0529.4+0041 system at mid-secondary eclipse PR Photo 29f/01 : The RXJ 0529.4+0041 system after secondary eclipse PR Video Clip 06/01 : Video of the RXJ 0529.4+0041 system Binary stars and stellar masses Since some time, astronomers have noted that most stars seem to form in binary or multiple systems. This is quite fortunate, as the study of binary stars is the only way in which it is possible to measure directly one of the most fundamental quantities of a star, its mass. The mass of a star determines its fate . Massive stars (with masses more than 50 times that of the Sun) lead a glorious, but short life. They are hot and very luminous and exhaust their energy supply in just a few million years. At the other end of the scale, low-mass stars like the Sun are more economical with their resources. Being cooler and dimmer, they are able to shine for billions of years [2]. But although the mass determines the fate of a star, it is not a trivial matter to measure this crucial parameter. In fact, it can only be determined directly if the star happens to be gravitationally bound to another star in a binary stellar system. Observations of the orbital motions of the two stars as they circle each other allows to "weigh" them, and also provide other important information, e.g. about their sizes and temperatures. Orbital motions The understanding of orbital motions has a long history in astronomy. The basic laws of Johannes Kepler (1571-1630) are still used to calculate the masses of orbiting objects, in the solar system as well as in binary stellar systems. However, while the observations of the motion of the nine planets and moons have allowed us to measure quite accurately the masses of objects in our vicinity, the information needed to "weigh" the binary stellar systems is not that easy to obtain. As a result, the mass estimates of the stars in binary systems are often rather uncertain. A main problem is that the individual stars in many binary systems can not be visually separated, even in the best telescopes. The information about the orbit may then come from the motions of the stars, if these are revealed by spectroscopic observations of the combined light (such systems are referred to as "spectroscopic binaries"). If absorption lines from both components are present in the spectrum, the measured wavelength of these double lines will shift periodically back and forth. This is the well-known Doppler effect and it directly reflects the changing velocities of the stars, as they move along their orbits and periodically approach and recede from the observer. Such spectroscopic observations therefore allow to measure the orbital velocities of the stars. It is exactly the same technique that is used to study and weigh extra-solar planets orbiting other stars [3]. However, this method has an important limitation. From the spectroscopical observations alone, it is only possible to deduce limits on the masses, as the inclination of orbits to the line-of-sight is usually unknown. The masses derived in this way (for stars as well as for exoplanets) are therefore only lower limits on the actual masses. Eclipsing Binaries However, fortunate observational circumstances sometimes allow to obtain all information about the stellar orbits. If a binary system is viewed (almost exactly) edge-on, the stars may pass in front of each other from time to time. Astronomers refer to this phenomenon as an "eclipse" and speak about an "eclipsing binary". The effect is similar to a "solar" eclipse as seen on the Earth, whenever the Moon passes in front of the Sun. Like the Moon blocks the sunlight, less light is received from the eclipsed star and thus the combined light from the binary system decreases during the eclipse. The way this happens (astronomers speak about the system's "lightcurve") then provides the additional information about the inclination of the orbit that is needed to determine exactly the stellar masses in a "spectroscopic" binary system. Very accurate values for the stellar diameters and the surface temperatures of the two stars can also be deduced. In short, when a full set of observations is available, it is possible to give a comprehensive description of an eclipsing binary system and its components. Eclipsing, spectroscopic binaries thus represent true cornerstones for the determination of stellar masses , and as such they are fundamental for our understanding of stellar evolution . Rather few such systems are known, but they can also be used to check ("calibrate") other, indirect methods to derive stellar parameters. It is on this background that the first discovery of an eclipsing binary system with two young, solar-like stars is of great interest. The Orion Binary Young stars are not so easy to find. One way is to look for their high-energy emission from a hot corona, created by their enhanced magnetic activity. The object RXJ 0529.4+0041 was first discovered in this way by the X-ray satellite ROSAT. Subsequent optical spectroscopy showed this object to be a young, low-mass spectroscopic binary system. And when a team of astronomers [1] used a 91-cm telescope at the Serra La Nave observing station on the slope of the Etna volcano (Sicily) to monitor the light curve, they also discovered that this system undergoes eclipses. All data confirm that RXJ 0529.4+0041 is located in the Orion Nebula at a distance of about 1500 light-years. This is one of the nearest star-forming regions and almost all stars in this area are quite young. Spectroscopic observations soon confirmed that the binary system was no exception. In particular, fairly strong absorption lines of the fragile element Lithium [4] were detected in both of the binary stars. As Lithium is known to be rapidly destroyed in stars, the finding of a relatively high content of this element implies that the stars must indeed be young. They were probably formed no more than 10 million years ago, i.e., in astronomical terms, they are "infant" stars . High-resolution spectroscopic observations, mostly with the CORALIE spectrometer on the Swiss 1.2-m Leonard Euler telescope at the ESO La Silla Observatory , were used to determine the radial velocities of the stars. From these, a first determination of the orbital and stellar parameters was possible. The orbital period turned out to be short. The two stars swing around each other in just 3 days. This also means they must be very close to each other (but still entirely detached from each other) - the detailed analysis showed that the distance between the two components is only 12 solar radii, or a little more than 8 million kilometres. If you would image yourself standing on the surface of the smaller star, the disk of the companion star would extend some 15° in the sky. This is 30 times larger than our view of the Sun! ADONIS observations The short orbital period and the even shorter duration of the eclipses, only 6 hours, posed a real challenge for the observers. They decided to obtain further high-angular resolution observations with the ADaptive Optics Near Infrared System (ADONIS) on the 3.6-m telescope at the ESO La Silla Observatory. Most fortunately, early ADONIS images demonstrated that this binary stellar system has a third companion, sufficiently far away from the two others to be seen as a separate star by ADONIS. This unexpected bonus made it possible to monitor the light changes of the binary system in great detail, by using the third companion as a convenient "reference" star. In December 2000 and January 2001, detailed ADONIS images of the RXJ 0529.4+0041 system were obtained in three near-infrared filters (the J-, H- and K-bands). ADONIS is equipped with the SHARP II camera and eliminates the adverse image-smearing effects of the atmospheric turbulence in real-time by means of a computer-controlled flexible mirror. As expected, the new, extremely sharp images of RXJ 0529.4+0041 greatly improved the achievable photometric precision. In particular, as the image of the third component was perfectly separated from the others, it did not "contaminate" the derived light curve of the eclipsing binary. The movie Primary eclipse Secondary eclipse ESO PR Photo 29a/01 ESO PR Photo 29a/01 [Preview - JPEG: 375 x 400 pix - 87k] [Normal - JPEG: 750 x 800 pix - 240k] ESO PR Photo 29d/01 ESO PR Photo 29d/01 [Preview - JPEG: 375 x 400 pix - 112k] [Normal - JPEG: 750 x 800 pix - 272k] ESO PR Photo 29b/01 ESO PR Photo 29b/01 [Preview - JPEG: 375 x 400 pix - 90k] [Normal - JPEG: 750 x 800 pix - 240k] ESO PR Photo 29e/01 ESO PR Photo 29e/01 [Preview - JPEG: 375 x 400 pix - 112k] [Normal - JPEG: 750 x 800 pix - 280k] ESO PR Photo 29c/01 ESO PR Photo 29c/01 [Preview - JPEG: 375 x 400 pix - 94k] [Normal - JPEG: 750 x 800 pix - 256k] ESO PR Photo 29f/01 ESO PR Photo 29f/01 [Preview - JPEG: 375 x 400 pix - 112k] [Normal - JPEG: 750 x 800 pix - 280k] Caption : Six individual frames from the ADONIS movie of the RXJ 0529.4+0041 eclipsing, binary stellar system, corresponding to the time around the "primary" and "secondary" eclipses, respectively. For a detailed explanation, read the text. ESO PR Video Clip 06/01 [512 x 448 pix MPEG] ESO PR Video Clip 06/01 (150 frames/00:06 min) [MPEG Video; 512 x 448 pix; 871 k] ESO Video Clip 06/01 shows the ADONIS images of the RXJ 0529.4+0041 eclipsing, binary stellar system, as recorded in three near-infrared filters (J, H, and K; to the left), with the observed light-curves (top) and a graphical representation of the system during a full orbit, as it would look like to a nearby observer. More details in the text The ADONIS images have been combined into an instructive movie ( PR Video Clip 06/01 ). The left-hand panel shows the eclipsing binary system (it is the upper right and brighter of the two objects; the light from the two stars merge into a single point of light) and the well visible third component (lower left), as they were recorded by ADONIS in the three different filter bands. As the two stars in the binary system move around each other in their orbits, eclipses occur and the brightness of the binary system clearly changes - it may help to play the movie several times to see this more clearly. For reference, the Universal Time (UT) and the orbital phase (increasing from 0 to 1 during a full revolution) are continuously displayed in the movie. The right-hand panel shows a build-up of the observed light curves for the binary system. It represents the brightness difference between binary system and the third object that shines with constant light. Both the primary, deeper and the secondary, less deep eclipses are well visible. The primary eclipse was observed on December 8, 2000 and is here displayed at phase zero. During this minimum, the brightness of the binary system decreases by about 45% (0.4 magnitudes). The primary eclipse takes place when the smaller component blocks the light from the brighter and hotter star. The orbital motions of the two stars are illustrated by a computer-generated, animated sequence. The secondary eclipse (at phase 0.5) dims the light from the system less; it occurs when the larger and brighter star almost completely (about 90%) hides its smaller companion. The second minimum was recorded on January 12, 2001. None of the eclipses is therefore "total". The stellar parameters A detailed analysis of these high-precision light curves allowed the astronomers to determine the orbits and hence, to perform an extremely accurate measurement of the fundamental stellar parameters for the two young stars of RXJ 0529.4+0041 . The star that is eclipsed during the primary eclipse (the "primary") is the more massive and also the hotter and brighter of the two stars. Its mass is 1.3 times that of our Sun, i.e., about 2.6 10 30 kg [2]. Its diameter is nearly 1.6 times larger than that of our Sun (i.e., about 2.2 million km) and the surface temperature is found to be a little more than 5000 °C, or a few hundred degrees cooler than the Sun. The "secondary" star is slightly lighter than our Sun. Its weight is about 90% of that of the Sun (1.8 10 30 kg) and the diameter is 20% larger (about 1.7 million km), while the surface temperature is 4000 degrees. In fact, these two stars are still so young that most of their energy comes from the contraction process - the first phase during which they are formed from an interstellar cloud by this process is not yet over and they are still getting smaller. It is by this process that collapsing stars heat up enough to start nuclear burning. When infant stars in RXJ 0529.4+0041 eventually reach middle-age, their sizes will most likely also be quite similar to that of the Sun. The significance of RXJ 0529.4+0041 Few systems are known for which such precise determinations of the stellar parameters have ever been possible - and this binary system represents the first case where both the components are such young stars . A detailed comparison of the derived stellar parameters with current models for the evolution of young stars shows fairly good agreement for the primary component. However, there are certain discrepancies in the case of the secondary component, showing that the current models for the early stages of lower-mass stars must still be refined. More information Part of the results described in this press release are described in more detail in a scientific article ( "RXJ 0529.4+0041: a low-mass pre-main sequence eclipsing-spectroscopic binary" by E. Covino et al.) that has been published in the European research journal Astronomy & Astrophysics (Vol. 361, p. 49). Notes [1] The team consists of Elvira Covino (Principal Investigator), Juan M. Alcalá , Rosita Paladino (all Osservatorio Astronomico di Capodimonte, Napoli, Italy), Antonio Frasca , Santo Catalano , Ettore Marilli (all Osservatorio Astrofisico di Catania, Italy) and Michael Sterzik (ESO-Chile). [2] One solar mass corresponds to 1.99 10 30 kg, or about 330,000 times the mass of the Earth. The Sun is about 4500 million years old and its total lifetime is of the order of 12-13,000 million years. It is an interesting thought that if the Sun would have been somewhat heavier, its total lifetime might have been too short for living organisms to develop on the Earth. In fact, the biological evolution that ultimately lead to the emergence of human beings apparently lasted about 4 billion years; this corresponds to the total lifetime of a star that is only about 20 % heavier than the Sun. Note also the current ESO-ESA CERN educational programme on "Life in the Universe". [3] In the case of exoplanets, the planet itself is not visible, but the spectral lines from the star are seen to wobble due to the gravitational influence of the planet, cf. ESO PR 07/01. [4] Several ESO Press Releases concern observations of the element Lithium in stars, e.g., PR 03/99 (in a giant star), PR 08/00 (in a metal-poor star) and PR 10/01 (from a "swallowed" exoplanet).

Flattest Star Ever Seen

NASA Astrophysics Data System (ADS)

2003-06-01

VLT Interferometer Measurements of Achernar Challenge Stellar Theory Summary To a first approximation, planets and stars are round. Think of the Earth we live on. Think of the Sun, the nearest star, and how it looks in the sky. But if you think more about it, you realize that this is not completely true. Due to its daily rotation, the solid Earth is slightly flattened ("oblate") - its equatorial radius is some 21 km (0.3%) larger than the polar one. Stars are enormous gaseous spheres and some of them are known to rotate quite fast, much faster than the Earth. This would obviously cause such stars to become flattened. But how flat? Recent observations with the VLT Interferometer (VLTI) at the ESO Paranal Observatory have allowed a group of astronomers [1] to obtain by far the most detailed view of the general shape of a fast-spinning hot star, Achernar (Alpha Eridani) , the brightest in the southern constellation Eridanus (The River). They find that Achernar is much flatter than expected - its equatorial radius is more than 50% larger than the polar one! In other words, this star is shaped very much like the well-known spinning-top toy, so popular among young children. The high degree of flattening measured for Achernar - a first in observational astrophysics - now poses an unprecedented challenge for theoretical astrophysics . The effect cannot be reproduced by common models of stellar interiors unless certain phenomena are incorporated, e.g. meridional circulation on the surface ("north-south streams") and non-uniform rotation at different depths inside the star. As this example shows, interferometric techniques will ultimately provide very detailed information about the shapes, surface conditions and interior structure of stars . PR Photo 15a/03 : The VLT Interferometer configuration for the Achernar measurements PR Photo 15b/03 : Achernar's "profile" , as measured by the VLTI. PR Photo 15c/03 : Models of Achernar's spatial shape. VLTI observations of Achernar ESO PR Photo 15a/03 ESO PR Photo 15a/03 [Preview - JPEG: 400 x 502 pix - 40k [Normal - JPEG: 800 x 1004 pix - 216k] Caption :PR Photo 15a/03 shows the configuration of the VLT Interferometer (VLTI) for the measurements of Achernar , described in this press release. The moveable, 40-cm test telescopes were positioned at specific "stations" (E0 + G1; B3 + M0; with baselines of 66 m and 140 m, respectively), allowing contiguous measurements in two nearly perpendicular directions. The two light beams were then sent via the path-compensating VLTI Delay Lines to the VINCI test instrument where they combined to form interferometric fringes. The positions of the four 8.2-m VLT Unit Telescopes are indicated by numbered circles. Test observations with the VLT Interferometer (VLTI) at the Paranal Observatory proceed well [2], and the astronomers have now begun to exploit many of these first measurements for scientific purposes. One spectacular result, just announced, is based on a series of observations of the bright, southern star Achernar (Alpha Eridani; the name is derived from "Al Ahir al Nahr" = "The End of the River"), carried out between September 11 and November 12, 2002. The two 40-cm siderostat test telescopes that served to obtain "First Light" with the VLT Interferometer in March 2001 were also used for these observations. They were placed at selected positions on the VLT Observing Platform at the top of Paranal to provide a "cross-shaped" configuration with two "baselines" of 66 m and 140 m, respectively, at 90° angle, cf. PR Photo 15a/03 . At regular time intervals, the two small telescopes were pointed towards Achernar and the two light beams were directed to a common focus in the VINCI test instrument in the centrally located VLT Interferometric Laboratory. Due to the Earth's rotation during the observations, it was possible to measure the angular size of the star (as seen in the sky) in different directions. Achernar's profile ESO PR Photo 15b/03 ESO PR Photo 15b/03 [Preview - JPEG: 400 x 464 pix - 35k [Normal - JPEG: 800 x 927 pix - 176k] Caption: PR Photo 15b/03 shows the profile of the rapidly rotating star Achernar , as deduced from observations with the VLT Interferometer (VLTI) [3]. The size is indicated in units of 0.001 arcsec (milli-arcsec). Individual angular diameter measurements are indicated by pairs of small points with associated error bars on opposite sides of the center. The fully drawn curve represents the best fitting ellipse. The ratio of the axes is 1.56 ± 0.05. The major axis of this ellipse is a measure of the "real" size of the star. Because of the projection effect, the minor axis shows the largest possible extension in the perpendicular direction. The axes ratio is therefore a minimal value; the star may be even more flattened than suggested by this ellipse. A first attempt to measure the geometrical deformation of a rapidly rotating star was carried out in 1974 with the Narrabri Intensity Interferometer (Australia) on the bright star Altair by British astronomer Hanbury Brown . However, because of technical limitations, those observations were unable to decide between different models for this star. More recently, Gerard T. Van Belle and collaborators observed Altair with the Palomar Testbed Interferometer (PTI) , measuring its apparent axial ratio as 1.140 ± 0.029 and placing some constraints upon the relationship between rotation velocity and stellar inclination. Achernar is a star of the hot B-type, with a mass of 6 times that of the Sun. The surface temperature is about 20,000 °C and it is located at a distance of 145 light-years. The apparent profile of Achernar ( PR Photo 15b/03 ), based on about 20,000 VLTI interferograms (in the K-band at wavelength 2.2 µm) with a total integration time of over 20 hours, indicates a surprisingly high axial ratio of 1.56 ± 0.05 [3]. This is obviously a result of Achernar's rapid rotation. Theoretical implications of the VLTI observations ESO PR Photo 15c/03 ESO PR Photo 15c/03 [Preview - JPEG: 816 x 400 pix - 67k [Normal - JPEG: 1792 x 800 pix - 224k] Caption:PR Photo 15c/03 provides a model view of Achernar , based on the profile measured with the VLTI, cf. PR Photo 15b/03 . Two different models are shown: in "A", the polar axis is inclined 50° to the line-of-sight; in "B", this angle is 90° The angular size of Achernar's elliptical profile as indicated in PR Photo 15b/03 is 0.00253 ± 0.00006 arcsec (major axis) and 0.00162 ± 0.00001 arcsec (minor axis) [4], respectively. At the indicated distance, the corresponding stellar radii are equal to 12.0 ± 0.4 and 7.7 ± 0.2 solar radii, or 8.4 and 5.4 million km, respectively. The first value is a measure of the star's equatorial radius. The second is an upper value for the polar radius - depending on the inclination of the star's polar axis to the line-of-sight, it may well be even smaller. The indicated ratio between the equatorial and polar radii of Achernar constitutes an unprecedented challenge for theoretical astrophysics, in particular concerning mass loss from the surface enhanced by the rapid rotation (the centrifugal effect) and also the distribution of internal angular momentum (the rotation velocity at different depths). The astronomers conclude that Achernar must either rotate faster (and hence, closer to the "critical" (break-up) velocity of about 300 km/sec) than what the spectral observations show (about 225 km/sec from the widening of the spectral lines) or it must violate the rigid-body rotation. The observed flattening cannot be reproduced by the "Roche-model" that implies solid-body rotation and mass concentration at the center of the star. The failure of that model is even more evident if the so-called "gravity darkening" effect is taken into account - this is a non-uniform temperature distribution on the surface which is certainly present on Achernar under such a strong geometrical deformation. Outlook This new measurement provides a fine example of what is possible with the VLT Interferometer already at this stage of implementation. It bodes well for the future research projects at this facility. With the interferometric technique, new research fields are now opening which will ultimately provide much more detailed information about the shapes, surface conditions and interior structure of stars. And in a not too distant future, it will become possible to produce interferometric images of the disks of Achernar and other stars. More information The research described in this press release is presented in a Letter to the Editor, soon to appear in the European research journal Astronomy & Astrophysics ("The spinning-top Be star Achernar from VLTI-VINCI" by Armando Domiciano de Souza et al.).

Revealing the Beast Within

NASA Astrophysics Data System (ADS)

2003-07-01

Deeply Embedded Massive Stellar Clusters Discovered in Milky Way Powerhouse Summary Peering into a giant molecular cloud in the Milky Way galaxy - known as W49 - astronomers from the European Southern Observatory (ESO) have discovered a whole new population of very massive newborn stars . This research is being presented today at the International Astronomical Union's 25th General Assembly held in Sydney, Australia, by ESO-scientist João Alves. With the help of infrared images obtained during a period of excellent observing conditions with the ESO 3.5-m New Technology Telescope (NTT) at the La Silla Observatory (Chile), the astronomers looked deep into this molecular cloud and discovered four massive stellar clusters, with hot and energetic stars as massive as 120 solar masses. The exceedingly strong radiation from the stars in the largest of these clusters is "powering" a 20 light-year diameter region of mostly ionized hydrogen gas (a "giant HII region"). W49 is one of the most energetic regions of star formation in the Milky Way. With the present discovery, the true sources of the enormous energy have now been revealed for the first time, finally bringing to an end some decades of astronomical speculations and hypotheses. PR Photo 21a/03 : Colour Composite of W49A (NTT+SOFI). PR Photo 21b/03 : Radio and Near-Infrared Composite of W49A Giant molecular clouds Stars form predominantly inside Giant Molecular Clouds which populate our Galaxy, the Milky Way. One of the most prominent of these is W49 , which has a mass of a million solar masses. It is located some 37,000 light-years away and is the most luminous star-forming region known in our home galaxy: its luminosity is several million times the luminosity of our Sun. A smaller region within this cloud is denoted W49A - this is one of the strongest radio-emitting areas known in the Galaxy . Massive stars are excessive in all ways. Compared to their smaller and ligther brethren, they form at an Olympic speed and have a frantic and relatively short life. Formation sites of massive stars are quite rare and, accordingly, most are many thousands of light-years away. For that reason alone, it is in general much more difficult to observe details of massive-star formation. Moreover, as massive stars are generally formed in the main plane of the Galaxy, in the disc where a lot of dust is present, the first stages of such stars are normally hidden behind very thick curtains. In the case of W49A , less than one millionth of the visible light emitted by a star in this region will find its way through the heavy intervening layers of galactic dust and reach the telescopes on Earth. And finally, because massive stars just formed are still very deeply embedded in their natal clouds, they are anyway not detectable at optical wavelengths. Observations of this early phase of the lives of heavy stars must therefore be done at longer wavelengths (where the dust is more transparent), but even so, such natal dusty clouds still absorb a large proportion of the light emitted by the young stars. Infrared observations of W49 ESO PR Photo 21a/03 ESO PR Photo 21a/03 [Preview - JPEG: 464 x 400 pix - 88k [Normal - JPEG: 928 x 800 pix - 972k] ESO PR Photo 21b/03 ESO PR Photo 21b/03 [Preview - JPEG: 400 x 461 pix - 104k [Normal - JPEG: 800 x 922 pix - 1.1M] Captions : PR Photo 21a/03 presents a composite near-infrared colour image from NTT/SofI. It covers a sky area of 5 x 5 arcmin 2 and the red, green and blue colours correspond to the Ks- (wavelength 2.2 µm), H- (1.65 µm) and J-band (1.2 µm), respectively. North is up and East is to the left. The labels identify known radio sources. The main cluster is seen north-east of the region labelled "O3". The colour of a star in this image is mostly a measure of the amount of dust absorption towards this star. Hence, all blue stars in this image are located in front of the star-forming region. PR Photo 21b/03 shows a three-colour composite of the central region of the star-forming region W49A , based on a radio emission map (wavelength 3.6 cm; here rendered as red) as well as two SofI images in the Ks- (green) and J-bands (blue). The red-only features in this image represent regions of ionized hydrogen so deeply embedded in the molecular cloud that they cannot be detected in the near-infrared, while blue sources are foreground stars. The radio continuum data were taken with the Very Large Array by Chris De Pree. Because of this observational obstacle, nobody had ever looked deep enough into the central most dense regions of the W49A molecular cloud - and nobody really knew what was in there. That is, until João Alves and his colleague, Nicole Homeier decided to obtain "deep" and penetrating observations of this mysterious area with the SofI near-infrared camera on the 3.5-m New Technology Telescope (NTT) at the ESO La Silla Observatory (Chile). A series of infrared images was secured during a spell of good weather and very good atmospheric conditions (seeing about 0.5 arcsec). They clearly show the presence of a cluster of stars at the centre of a region of ionized hydrogen gas (an "HII-region") measuring 20 light-years across. In addition, three other smaller clusters of stars were detected in the image. Altogether, the ESO astronomers were able to identify more than one hundred heavy-weight stars inside W49A , with masses greater than 15 to 20 times the mass of our Sun. Among these, about thirty are located within the 20 light-year central region and about ten in each of the three other clusters. The discovery of these hot and massive stars solves a long-standing problem concerning W49A : the exceptional brightness (in astronomical terminology: "luminosity") of the entire region requires the energetic output from about one hundred massive stars, and nobody had ever seen them. But here they are on the deep and sharp SofI images! Formation scenarios The presence of such a large number of very massive stars spread over the entire region suggests that star formation in the various regions of W49A must have happened rather simultaneously from different seeds and not, as some theories propose, by a "domino-type" chain effect where stellar winds of fast particles and the emitted radiation of newly formed massive stars trigger another burst of star formation in the immediate neighbourhood. The present research results also imply that star formation in W49A began earlier and extends over a larger area than previously thought. João Alves is sure that this news will be received with interest by his colleagues: " W49A has long been known to radio astronomers as one of the most powerful star-forming region in the Galaxy with 30 or so massive baby-stars of the O-type, very deeply embedded in their parental cloud. What we have found is in fact quite amazing: this stellar maternity ward is much bigger than we first thought and it has not stopped forming stars yet. We now have evidence for no less than more than one hundred such stars in this region, way beyond the few dozen known until now ". Nicole Homeier adds: " Above all, we uncovered four massive clusters in there, with stars as massive as 120 times the mass of our Sun - real 'beasts' that bombard their surroundings with incredibly intense stellar winds and strong ultraviolet light. This is not a nice place to live - and imagine, this is all inside our so-called 'quiet Galaxy'!" More information The research described in this press release is presented in a research article in the professional research journal Astrophysical Journal ("Uncovering the Beast: Discovery of Embedded Massive Stellar Clusters in W49A" by João Alves and Nicole Homeier , Volume 589, pp. L45-L49). It is also one of the topics addressed by João Alves during his talk given at the General Assembly of the International Astronomical Union in Sydney on Tuesday, July 22, 2003.

NICMOS CAPTURES THE HEART OF OMC-1

NASA Technical Reports Server (NTRS)

2002-01-01

The infrared vision of the Hubble Space Telescope's Near Infrared Camera and Multi-Object Spectrometer (NICMOS) is providing a dramatic new look at the beautiful Orion Nebula which contains the nearest nursery for massive stars. For comparison, Hubble's Wide Field and Planetary Camera 2 (WFPC2) image on the left shows a large part of the nebula as it appears in visible light. The heart of the giant Orion molecular cloud, OMC-1, is included in the relatively dim and featureless area inside the blue outline near the top of the image. Light from a few foreground stars seen in the WFPC2 image provides only a hint of the many other stars embedded in this dense cloud. NICMOS's infrared vision reveals a chaotic, active star birth region (as seen in the right-hand image). Here, stars and glowing interstellar dust, heated by and scattering the intense starlight, appear yellow-orange. Emission by excited hydrogen molecules appears blue. The image is oriented with north up and east to the left. The diagonal extent of the image is about 0.4 light-years. Some details are as small as the size of our solar system. The brightest object in the image is a massive young star called BN (Becklin-Neugebauer). Blue 'fingers' of molecular hydrogen emission indicate the presence of violent outflows, probably produced by a young star or stars still embedded in dust (located to the lower left, southeast, of BN). The outflowing material may also produce the crescent-shaped 'bow shock' on the edge of a dark feature north of BN and the two bright 'arcs' south of BN. The detection of several sets of closely spaced double stars in these observations further demonstrates NICMOS's ability to see fine details not possible from ground-based telescopes. Credits: NICMOS image -- Rodger Thompson, Marcia Rieke, Glenn Schneider, Susan Stolovy (University of Arizona); Edwin Erickson (SETI Institute/Ames Research Center); David Axon (STScI); and NASA WFPC2 image -- C. Robert O'Dell, Shui Kwan Wong (Rice University) and NASA Image files in GIF and JPEG format and captions may be accessed on the Internet via anonymous ftp from ftp.stsci.edu in /pubinfo.

Old Galaxies in the Young Universe

NASA Astrophysics Data System (ADS)

2004-07-01

Very Large Telescope Unravels New Population of Very Old Massive Galaxies [1] Summary Current theories of the formation of galaxies are based on the hierarchical merging of smaller entities into larger and larger structures, starting from about the size of a stellar globular cluster and ending with clusters of galaxies. According to this scenario, it is assumed that no massive galaxies existed in the young universe. However, this view may now have to be revised. Using the multi-mode FORS2 instrument on the Very Large Telescope at Paranal, a team of Italian astronomers [2] have identified four remote galaxies, several times more massive than the Milky Way galaxy, or as massive as the heaviest galaxies in the present-day universe. Those galaxies must have formed when the Universe was only about 2,000 million years old, that is some 12,000 million years ago. The newly discovered objects may be members of a population of old massive galaxies undetected until now. The existence of such systems shows that the build-up of massive elliptical galaxies was much faster in the early Universe than expected from current theory. PR Photo 21a/04: Small Part of the K20 Field Showing the z=1.9 Elliptical Galaxy (ACS/HST). PR Photo 21b/04: Averaged Spectrum of Old Galaxies (FORS2/VLT). Hierarchical merging Galaxies are like islands in the Universe, made of stars as well as dust and gas clouds. They come in different sizes and shapes. Astronomers generally distinguish between spiral galaxies - like our own Milky Way, NGC 1232 or the famous Andromeda galaxy - and elliptical galaxies, the latter mostly containing old stars and having very little dust or gas. Some galaxies are intermediate between spirals and ellipticals and are referred to as lenticular or spheroidal galaxies. Galaxies are not only distinct in shape, they also vary in size: some may be as "light" as a stellar globular cluster in our Milky Way (i.e. they contain about the equivalent of a few million Suns) while others may be more massive than a million million Suns. Presently, more than half of the stars in the Universe are located in massive spheroidal galaxies. One of the main open questions of modern astrophysics and cosmology is how and when galaxies formed and evolved starting from the primordial gas that filled the early Universe. In the most popular current theory, galaxies in the local Universe are the result of a relatively slow process where small and less massive galaxies merge to gradually build up bigger and more massive galaxies. In this scenario, dubbed "hierarchical merging", the young Universe was populated by small galaxies with little mass, whereas the present Universe contains large, old and massive galaxies - the very last to form in the final stage of a slow assembling process. If this scenario were true, then one should not be able to find massive elliptical galaxies in the young universe. Or, in other words, due to the finite speed of light, there should be no such massive galaxies very far from us. And indeed, until now no old elliptical galaxy was known beyond a radio-galaxy at redshift 1.55 [3] that was discovered almost ten years ago. The K20 survey ESO PR Photo 21a/04 ESO PR Photo 21a/04 Part of the K20 Field, centred on the z=1.9 galaxy (ACS/HST) [Preview - JPEG: 400 x 424 pix - 45k] [Normal - JPEG: 800 x 847 pix - 712k] [Hires - JPEG: 1334 x 1413 pix - 1.3M] Caption: ESO PR Photo 21a/04 shows a small region in the K20 field surveyed by the astronomers. This region is centred on the newly discovered z=1.9 redshift galaxy. The image is based on frames acquired by the Advanced Camera for Surveys (ACS) on the Hubble Space Telescope in the framework of the GOODS Public HST Treasury Program (P.I. M. Giavalisco, STScI, Baltimore, USA). They show the real colours of the galaxies. The four old massive spheroidal galaxies discovered in this survey appear very red compared to the other faint galaxies. (Image courtesy of Piero Rosati and Bob Fosbury, ESO Garching). In order to better understand the formation process of galaxies and to verify if the hierarchical merging scenario is valid, a team of Italian and ESO astronomers [2] used ESO's Very Large Telescope as a "time machine" to do a search for very remote elliptical galaxies. However, this is not trivial. Distant elliptical galaxies, with their content of old and red stars, must be very faint objects indeed at optical wavelengths as the bulk of their light is redshifted into the infrared part of the spectrum. Remote elliptical galaxies are thus among the most difficult observational targets even for the largest telescopes; this is also why the 1.55 redshift record has persisted for so long. But this challenge did not stop the researchers. They obtained deep optical spectroscopy with the multi-mode FORS2 instrument on the VLT for a sample of 546 faint objects found in a sky area of 52 arcmin2 (or about one tenth of the area of the Full Moon) known as the K20 field, and which partly overlaps with the GOODS-South area. Their perseverance paid off and they were rewarded by the discovery of four old, massive galaxies with redshifts between 1.6 and 1.9. These galaxies are seen when the Universe was only about 25% of its present age of 13,700 million years. For one of the galaxies, the K20 team benefited also from the database of publicly available spectra in the GOODS-South area taken by the ESO/GOODS team. A new population of galaxies ESO PR Photo 21b/04 ESO PR Photo 21b/04 Averaged Spectrum of Old Galaxies (FORS2/VLT). [Preview - JPEG: 400 x 496 pix - 58k] [Normal - JPEG: 800 x 992 pix - 366k] [Hires - JPEG: 1700 x 2108 pix - 928k] Caption: ESO PR Photo 21b/04 shows the averaged spectrum (blue) of the four newly discovered old massive galaxies compared to a set of template spectra. The bottom compares it with the spectrum of a star having a surface temperature of 7200 degrees (green) and 6800 degrees (red), respectively. The upper graph makes a comparison with synthetic spectra of simulated simple stellar populations with ages of 500, 1100 and 3000 million years. This figure demonstrates that the newly found galaxies mostly contain old low-mass stars and must have formed between 1,000 and 2,000 million years earlier than the epoch at which they are now seen. The newly discovered galaxies are thus seen when the Universe was about 3,500 million years old, i.e. 10,000 million years ago. But from the spectra taken, it appears that these galaxies contain stars with ages between 1,000 and 2,000 million years. This implies that the galaxies must have formed accordingly earlier, and that they must have essentially completed their assembly at a moment when the Universe was only 1,500 to 2,500 million years old. The galaxies appear to have masses in excess of one hundred thousand million solar masses and they are therefore of sizes similar to the most massive galaxies in the present-day Universe. Complementary images taken within the GOODS ("The Great Observatories Origins Deep Survey") survey by the Hubble Space Telescope show that these galaxies have structures and shapes more or less identical to those of the present-day massive elliptical galaxies. The new observations have therefore revealed a new population of very old and massive galaxies. The existence of such massive and old spheroidal galaxies in the early Universe shows that the assembly of the present-day massive elliptical galaxies started much earlier and was much faster than predicted by the hierarchical merging theory. Says Andrea Cimatti (INAF, Firenze, Italy), leader of the team: "Our new study now raises fundamental questions about our understanding and knowledge of the processes that regulated the genesis and the evolutionary history of the Universe and its structures."

Computational scalability of large size image dissemination

NASA Astrophysics Data System (ADS)

Kooper, Rob; Bajcsy, Peter

2011-01-01

We have investigated the computational scalability of image pyramid building needed for dissemination of very large image data. The sources of large images include high resolution microscopes and telescopes, remote sensing and airborne imaging, and high resolution scanners. The term 'large' is understood from a user perspective which means either larger than a display size or larger than a memory/disk to hold the image data. The application drivers for our work are digitization projects such as the Lincoln Papers project (each image scan is about 100-150MB or about 5000x8000 pixels with the total number to be around 200,000) and the UIUC library scanning project for historical maps from 17th and 18th century (smaller number but larger images). The goal of our work is understand computational scalability of the web-based dissemination using image pyramids for these large image scans, as well as the preservation aspects of the data. We report our computational benchmarks for (a) building image pyramids to be disseminated using the Microsoft Seadragon library, (b) a computation execution approach using hyper-threading to generate image pyramids and to utilize the underlying hardware, and (c) an image pyramid preservation approach using various hard drive configurations of Redundant Array of Independent Disks (RAID) drives for input/output operations. The benchmarks are obtained with a map (334.61 MB, JPEG format, 17591x15014 pixels). The discussion combines the speed and preservation objectives.

NICMOS PEERS INTO HEART OF DYING STAR

NASA Technical Reports Server (NTRS)

2002-01-01

The Egg Nebula, also known as CRL 2688, is shown on the left as it appears in visible light with the Hubble Space Telescope's Wide Field and Planetary Camera 2 (WFPC2) and on the right as it appears in infrared light with Hubble's Near Infrared Camera and Multi-Object Spectrometer (NICMOS). Since infrared light is invisible to humans, the NICMOS image has been assigned colors to distinguish different wavelengths: blue corresponds to starlight reflected by dust particles, and red corresponds to heat radiation emitted by hot molecular hydrogen. Objects like the Egg Nebula are helping astronomers understand how stars like our Sun expel carbon and nitrogen -- elements crucial for life -- into space. Studies on the Egg Nebula show that these dying stars eject matter at high speeds along a preferred axis and may even have multiple jet-like outflows. The signature of the collision between this fast-moving material and the slower outflowing shells is the glow of hydrogen molecules captured in the NICMOS image. The distance between the tip of each jet is approximately 200 times the diameter of our solar system (out to Pluto's orbit). Credits: Rodger Thompson, Marcia Rieke, Glenn Schneider, Dean Hines (University of Arizona); Raghvendra Sahai (Jet Propulsion Laboratory); NICMOS Instrument Definition Team; and NASA Image files in GIF and JPEG format and captions may be accessed on the Internet via anonymous ftp from ftp.stsci.edu in /pubinfo.

Image editing with Adobe Photoshop 6.0.

PubMed

Caruso, Ronald D; Postel, Gregory C

2002-01-01

The authors introduce Photoshop 6.0 for radiologists and demonstrate basic techniques of editing gray-scale cross-sectional images intended for publication and for incorporation into computerized presentations. For basic editing of gray-scale cross-sectional images, the Tools palette and the History/Actions palette pair should be displayed. The History palette may be used to undo a step or series of steps. The Actions palette is a menu of user-defined macros that save time by automating an action or series of actions. Converting an image to 8-bit gray scale is the first editing function. Cropping is the next action. Both decrease file size. Use of the smallest file size necessary for the purpose at hand is recommended. Final file size for gray-scale cross-sectional neuroradiologic images (8-bit, single-layer TIFF [tagged image file format] at 300 pixels per inch) intended for publication varies from about 700 Kbytes to 3 Mbytes. Final file size for incorporation into computerized presentations is about 10-100 Kbytes (8-bit, single-layer, gray-scale, high-quality JPEG [Joint Photographic Experts Group]), depending on source and intended use. Editing and annotating images before they are inserted into presentation software is highly recommended, both for convenience and flexibility. Radiologists should find that image editing can be carried out very rapidly once the basic steps are learned and automated. Copyright RSNA, 2002

Interhospital network system using the worldwide web and the common gateway interface.

PubMed

Oka, A; Harima, Y; Nakano, Y; Tanaka, Y; Watanabe, A; Kihara, H; Sawada, S

1999-05-01

We constructed an interhospital network system using the worldwide web (WWW) and the Common Gateway Interface (CGI). Original clinical images are digitized and stored as a database for educational and research purposes. Personal computers (PCs) are available for data treatment and browsing. Our system is simple, as digitized images are stored into a Unix server machine. Images of important and interesting clinical cases are selected and registered into the image database using CGI. The main image format is 8- or 12-bit Joint Photographic Experts Group (JPEG) image. Original clinical images are finally stored in CD-ROM using a CD recorder. The image viewer can browse all of the images for one case at once as thumbnail pictures; image quality can be selected depending on the user's purpose. Using the network system, clinical images of interesting cases can be rapidly transmitted and discussed with other related hospitals. Data transmission from relational hospitals takes 1 to 2 minutes per 500 Kbyte of data. More distant hospitals (e.g., Rakusai Hospital, Kyoto) takes 1 minute more. The mean number of accesses our image database in a recent 3-month period was 470. There is a total about 200 cases in our image database, acquired over the past 2 years. Our system is useful for communication and image treatment between hospitals and we will describe the elements of our system and image database.

A Series of Laminar Jet Flame

NASA Technical Reports Server (NTRS)

2003-01-01

Study of the downlink data from the Laminar Soot Processes (LSP) experiment quickly resulted in discovery of a new mechanism of flame extinction caused by radiation of soot. Scientists found that the flames emit soot sooner than expected. These findings have direct impact on spacecraft fire safety, as well as the theories predicting the formation of soot -- which is a major factor as a pollutant and in the spread of unwanted fires. This sequence, using propane fuel, was taken STS-94, July 4 1997, MET:2/05:30 (approximate). LSP investigated fundamental questions regarding soot, a solid byproduct of the combustion of hydrocarbon fuels. The experiment was performed using a laminar jet diffusion flame, which is created by simply flowing fuel-like ethylene or propane -- through a nozzle and igniting it, much like a butane cigarette lighter. The LSP principal investigator was Gerard Faeth, University of Michigan, Arn Arbor. The experiment was part of the space research investigations conducted during the Microgravity Science Laboratory-1R mission (STS-94, July 1-17 1997). LSP results led to a reflight for extended investigations on the STS-107 research mission in January 2003. Advanced combustion experiments will be a part of investigations planned for the International Space Station. (249KB JPEG, 1350 x 1524 pixels; downlinked video, higher quality not available) The MPG from which this composite was made is available at http://mix.msfc.nasa.gov/ABSTRACTS/MSFC-0300185.html.

Can Commercial Digital Cameras Be Used as Multispectral Sensors? A Crop Monitoring Test.

PubMed

Lebourgeois, Valentine; Bégué, Agnès; Labbé, Sylvain; Mallavan, Benjamin; Prévot, Laurent; Roux, Bruno

2008-11-17

The use of consumer digital cameras or webcams to characterize and monitor different features has become prevalent in various domains, especially in environmental applications. Despite some promising results, such digital camera systems generally suffer from signal aberrations due to the on-board image processing systems and thus offer limited quantitative data acquisition capability. The objective of this study was to test a series of radiometric corrections having the potential to reduce radiometric distortions linked to camera optics and environmental conditions, and to quantify the effects of these corrections on our ability to monitor crop variables. In 2007, we conducted a five-month experiment on sugarcane trial plots using original RGB and modified RGB (Red-Edge and NIR) cameras fitted onto a light aircraft. The camera settings were kept unchanged throughout the acquisition period and the images were recorded in JPEG and RAW formats. These images were corrected to eliminate the vignetting effect, and normalized between acquisition dates. Our results suggest that 1) the use of unprocessed image data did not improve the results of image analyses; 2) vignetting had a significant effect, especially for the modified camera, and 3) normalized vegetation indices calculated with vignetting-corrected images were sufficient to correct for scene illumination conditions. These results are discussed in the light of the experimental protocol and recommendations are made for the use of these versatile systems for quantitative remote sensing of terrestrial surfaces.

High-Resolution Chirp and Mini-Sparker Seismic-Reflection Data From the Southern California Continental Shelf - Gaviota to Mugu Canyon

USGS Publications Warehouse

Sliter, Ray W.; Triezenberg, Peter J.; Hart, Patrick E.; Draut, Amy E.; Normark, William R.; Conrad, James E.

2008-01-01

The U.S. Geological Survey (USGS) collected high-resolution shallow seismic-reflection data in September, 2007, and June-July, 2008, from the continental shelf offshore of southern California between Gaviota and Mugu Canyon, in support of the California's State Waters Mapping Program. Data were acquired using SIG 2mille mini-sparker and Edgetech chirp 512 instruments aboard the R/V Zephyr (Sept. 2007) and R/V Parke Snavely (June-July 2008). The survey area spanned approximately 120 km of coastline, and included shore-perpendicular transects spaced 1.0-1.5 km apart that extended offshore to at least the 3-mile limit of State waters, in water depths ranging from 10 m near shore to 300 m near the offshore extent of Mugu and Hueneme submarine canyons. Subbottom acoustic penetration spanned tens to several hundred meters, variable by location. This report includes maps of the surveyed transects, linked to Google Earth software, as well as digital data files showing images of each transect in SEG-Y, JPEG, and TIFF formats. The images of sediment deposits, tectonic structure, and natural-gas seeps collected during this study provide geologic information that is essential to coastal zone and resource management at Federal, State and local levels, as well as to future research on the sedimentary, tectonic, and climatic record of southern California.

New procedures to evaluate visually lossless compression for display systems

NASA Astrophysics Data System (ADS)

Stolitzka, Dale F.; Schelkens, Peter; Bruylants, Tim

2017-09-01

Visually lossless image coding in isochronous display streaming or plesiochronous networks reduces link complexity and power consumption and increases available link bandwidth. A new set of codecs developed within the last four years promise a new level of coding quality, but require new techniques that are sufficiently sensitive to the small artifacts or color variations induced by this new breed of codecs. This paper begins with a summary of the new ISO/IEC 29170-2, a procedure for evaluation of lossless coding and reports the new work by JPEG to extend the procedure in two important ways, for HDR content and for evaluating the differences between still images, panning images and image sequences. ISO/IEC 29170-2 relies on processing test images through a well-defined process chain for subjective, forced-choice psychophysical experiments. The procedure sets an acceptable quality level equal to one just noticeable difference. Traditional image and video coding evaluation techniques, such as, those used for television evaluation have not proven sufficiently sensitive to the small artifacts that may be induced by this breed of codecs. In 2015, JPEG received new requirements to expand evaluation of visually lossless coding for high dynamic range images, slowly moving images, i.e., panning, and image sequences. These requirements are the basis for new amendments of the ISO/IEC 29170-2 procedures described in this paper. These amendments promise to be highly useful for the new content in television and cinema mezzanine networks. The amendments passed the final ballot in April 2017 and are on track to be published in 2018.

Application of content-based image compression to telepathology

NASA Astrophysics Data System (ADS)

Varga, Margaret J.; Ducksbury, Paul G.; Callagy, Grace

2002-05-01

Telepathology is a means of practicing pathology at a distance, viewing images on a computer display rather than directly through a microscope. Without compression, images take too long to transmit to a remote location and are very expensive to store for future examination. However, to date the use of compressed images in pathology remains controversial. This is because commercial image compression algorithms such as JPEG achieve data compression without knowledge of the diagnostic content. Often images are lossily compressed at the expense of corrupting informative content. None of the currently available lossy compression techniques are concerned with what information has been preserved and what data has been discarded. Their sole objective is to compress and transmit the images as fast as possible. By contrast, this paper presents a novel image compression technique, which exploits knowledge of the slide diagnostic content. This 'content based' approach combines visually lossless and lossy compression techniques, judiciously applying each in the appropriate context across an image so as to maintain 'diagnostic' information while still maximising the possible compression. Standard compression algorithms, e.g. wavelets, can still be used, but their use in a context sensitive manner can offer high compression ratios and preservation of diagnostically important information. When compared with lossless compression the novel content-based approach can potentially provide the same degree of information with a smaller amount of data. When compared with lossy compression it can provide more information for a given amount of compression. The precise gain in the compression performance depends on the application (e.g. database archive or second opinion consultation) and the diagnostic content of the images.

Islandora A Flexible Drupal-Based Virtual Research Environment

NASA Astrophysics Data System (ADS)

Leggott, M.; Pan, J.

2011-12-01

Research today exists in a landscape where data flood in, literature grows exponentially, and disciplinary boundaries are increasingly porous. Many of the greatest challenges facing researchers are related to managing the information produced during the research life cycle - from the discussion of new projects to the creation of funding proposals, the production and analysis of data, and the presentation of findings via conferences and scholarly publications. The Islandora framework provides a system that stewards digital data in any form (textual, numeric, scientific, multimedia) along the entire course of this research continuum, it facilitates collaboration not just among physically distant members of research groups but also among research groups and their associated support groups. Because Islandora accommodates both the project-specific, experiment-based context and the cross-project, interdisciplinary exploration context of data, the approach to the creation and discovery of data can be called 'discipline-agnostic.' UPEI's Virtual Research Environment (or VRE) has demonstrated the immense benefits of such an approach. In one example scientists collects samples, create detailed metadata for each sample, potentially generating thousands of data files of various kinds, which can all be loaded in one step. Software (some of it developed specifically for this project) then combines, recombines, and transforms these data into alternate formats for analysis -- thereby saving scientists hundreds of hours of manual labor. Wherever possible data are translated, converting them from proprietary file formats to standard XML, and stored -- thereby exposing the data to a larger audience that may bring them together with quite different samples or experiments in novel ways. The same computer processes and software work-flows brought to bear in the context of one research program can be re-used in other areas and across completely different disciplines, since the data are represented by similar streams of bits and bytes. Islandora is developing a strong set of features of interest to the geoscience community, including: a generic XML form builder with current support for DC, FGDC, EML, KML, NCD, Darwin Core, DDI, PREMIS and more coming). Strong support for large image files via JPEG2000, document formats, entity extraction, geo-referencing functions, OpenLayers integration, mobile iPad/iPhone interfaces and more make Islandora an ideal digital asset management system for geoscience researchers. Islandora is an open source project developed at the University of PEI, with a full suite of services available from the UPEI spin-off DiscoveryGarden Inc. Islandora is built around the Drupal content management system and the Fedora repository, providing a robust and flexible digital asset management framework. Examples of Islandora systems include a variety of research data repositories, including some examples in the earth sciences, such as the ESDORA system at Oak Ridge National Laboratory. The system will be described in detail, using a number of research systems as examples.

GIRAFFE Reaches towards the Stars

NASA Astrophysics Data System (ADS)

2002-07-01

"First Light" of New Powerful Spectrograph at the VLT Summary The first observations of stellar spectra have just been performed with the new GIRAFFE multi-object spectrograph on the ESO Very Large Telescope (VLT) at the Paranal Observatory in Chile. This milestone event was achieved in the early morning of July 3, 2002. It signifies another important step towards the full implementation of the extremely powerful Fibre Large Array Multi-Element Spectrograph (FLAMES) , one of the main instruments for the ESO VLT. This project is co-ordinated by ESO and incorporates many complex components that have been constructed at various research institutions in Europe and Australia. The GIRAFFE spectrograph provides unique possibilities for detailed observations of the properties of individual stars located in our Milky Way galaxy ( PR 16b/02 ) as well as in other galaxies of the Local Group. PR Photo 16a/02 : A series of stellar spectra recorded by GIRAFFE during "First Light" . PR Photo 16b/02 : Details of some of these stellar spectra . FLAMES and GIRAFFE ESO PR Photo 16a/02 ESO PR Photo 16a/02 [Preview - JPEG: 756 x 400 pix - 363k] [Normal - JPEG: 1511 x 800 pix - 1.2M] ESO PR Photo 16b/02 ESO PR Photo 16b/02 [Preview - JPEG: 461 x 400 pix - 196k] [Normal - JPEG: 921 x 800 pix - 606k] Caption : PR Photo 16a/02 : "First Light" test observation with the GIRAFFE spectrograph of about 50 high-quality spectra (10 min exposure at spectral resolution 7,000) of stars in the Milky Way disk, in the early morning of July 3, 2002. The stars have magnitudes of 12 - 16 and are all of solar type. The photo shows part of the image recorded with a 2000 x 4000 pixel CCD detector at the focal plane of the spectrograph. Each stellar spectrum is seen as one vertical line - some of the absorption lines can be seen as dark horizontal features. PR Photo 16b/02 shows a small part of this image. The three strong absorption lines that are visible as horizontal, dark lines in the lower part of the photo are due to the common element Magnesium in the atmospheres of these stars (the Mg b triplet at wavelength 517 nm). The different intensity of the spectra is due to the different brightness of the stars. The multi-object GIRAFFE spectrograph , now installed on the 8.2-m KUEYEN Unit Telescope of ESO's Very Large Telescope (VLT) at the Paranal Observatory (Chile), achieved "First Light" in the early morning hours of July 3, 2002. This complex instrument allows to obtain high-quality spectra of a large variety of celestial objects, from individual stars in the Milky Way and other nearby galaxies, to very distant galaxies. It functions by means of multiple optical fibres that guide the light from the telescope's focal plane into the entry slit of the spectrograph. Here the light is dispersed into its different colours. Anticipating already at this early moment the future, highly effective operation of the new facility, the first data were immediately prepared for astronomical interpretation ("reduced") by means of a dedicated software package ("pipeline"). GIRAFFE and these fibres are an integral part of the advanced Fibre Large Array Multi-Element Spectrograph (FLAMES) facility which also includes the OzPoz positioner and an optical field corrector . It is the outcome of a collaboration between ESO, Observatoire de Paris-Meudon Observatoire de Genève-Lausanne and the Anglo Australian Observatory (AAO) . More details are available in ESO PR 01/02. The principle of this instrument involves the positioning in the telescope's focal plane of a large number of optical fibres. This is done in such a way that each of them guides the light from one particular celestial object towards the spectrograph that records the spectra of all these objects simultaneously. The size of the available field-of-view is no less than about 25 arcmin across, i.e. almost as large as the full moon. The individual fibres are moved and positioned "on the objects" in the field by means of the OzPoz positioner. Different observational modes FLAMES has several different modes of operation. Two of these are of the simple "multi-object" type: each fibre collects the light from one star or galaxy - up to 132 objects can be observed simultaneously, cf. PR 16a/02 . In this respect, GIRAFFE provides absolutely unique possibilities for detailed observations of the properties (age, chemical composition, rotation and space velocity) of individual stars located in the main disk, central bulge or halo of our Milky Way galaxy ( PR 16b/02 ), and also of stars in other galaxies of the Local Group. Another observational mode is known as "3-D spectroscopy" or "integrated field". This consists of obtaining simultaneous spectra of smaller areas of extended objects like galaxies or nebulae. For this, 15 deployable fibre bundles, the so-called Integral Field Units (IFUs) , cf. ESO PR 01/02 , are used. Each IFU is a microscopic, state-of-the-art two-dimensional lens array with an aperture of 3 x 2 arcsec 2 on the sky. It is like an insect's eye, with twenty micro-lenses coupled with optical fibres leading the light recorded at each point in the field to the entry slit of the spectrograph. Unique research opportunities opening The FLAMES facility, once in full operation after further testing and fine-tuning later this year, will enormously increase the possibilities to study stellar physics and the evolution of galaxies , two of the cornerstones in our understanding of the structure and evolution of the Universe. With the great light-gathering capacity of the VLT, FLAMES will be able to gather very comprehensive information about even rather faint objects, enabling the astronomers to study them in a degree of detail so far reserved for brighter, nearby stars. The quality of the first spectra from GIRAFFE, although far from exploiting the ultimate potential of the new facility, fully confirm these expectations. Note [1]: This is a joint Press Release of ESO and the Observatoire de Paris.

Optimal erasure protection for scalably compressed video streams with limited retransmission.

PubMed

Taubman, David; Thie, Johnson

2005-08-01

This paper shows how the priority encoding transmission (PET) framework may be leveraged to exploit both unequal error protection and limited retransmission for RD-optimized delivery of streaming media. Previous work on scalable media protection with PET has largely ignored the possibility of retransmission. Conversely, the PET framework has not been harnessed by the substantial body of previous work on RD optimized hybrid forward error correction/automatic repeat request schemes. We limit our attention to sources which can be modeled as independently compressed frames (e.g., video frames), where each element in the scalable representation of each frame can be transmitted in one or both of two transmission slots. An optimization algorithm determines the level of protection which should be assigned to each element in each slot, subject to transmission bandwidth constraints. To balance the protection assigned to elements which are being transmitted for the first time with those which are being retransmitted, the proposed algorithm formulates a collection of hypotheses concerning its own behavior in future transmission slots. We show how the PET framework allows for a decoupled optimization algorithm with only modest complexity. Experimental results obtained with Motion JPEG2000 compressed video demonstrate that substantial performance benefits can be obtained using the proposed framework.

System considerations for efficient communication and storage of MSTI image data

NASA Technical Reports Server (NTRS)

Rice, Robert F.

1994-01-01

The Ballistic Missile Defense Organization has been developing the capability to evaluate one or more high-rate sensor/hardware combinations by incorporating them as payloads on a series of Miniature Seeker Technology Insertion (MSTI) flights. This publication represents the final report of a 1993 study to analyze the potential impact f data compression and of related communication system technologies on post-MSTI 3 flights. Lossless compression is considered alone and in conjunction with various spatial editing modes. Additionally, JPEG and Fractal algorithms are examined in order to bound the potential gains from the use of lossy compression. but lossless compression is clearly shown to better fit the goals of the MSTI investigations. Lossless compression factors of between 2:1 and 6:1 would provide significant benefits to both on-board mass memory and the downlink. for on-board mass memory, the savings could range from $5 million to $9 million. Such benefits should be possible by direct application of recently developed NASA VLSI microcircuits. It is shown that further downlink enhancements of 2:1 to 3:1 should be feasible thorough use of practical modifications to the existing modulation system and incorporation of Reed-Solomon channel coding. The latter enhancement could also be achieved by applying recently developed VLSI microcircuits.

Phaedra, a protocol-driven system for analysis and validation of high-content imaging and flow cytometry.

PubMed

Cornelissen, Frans; Cik, Miroslav; Gustin, Emmanuel

2012-04-01

High-content screening has brought new dimensions to cellular assays by generating rich data sets that characterize cell populations in great detail and detect subtle phenotypes. To derive relevant, reliable conclusions from these complex data, it is crucial to have informatics tools supporting quality control, data reduction, and data mining. These tools must reconcile the complexity of advanced analysis methods with the user-friendliness demanded by the user community. After review of existing applications, we realized the possibility of adding innovative new analysis options. Phaedra was developed to support workflows for drug screening and target discovery, interact with several laboratory information management systems, and process data generated by a range of techniques including high-content imaging, multicolor flow cytometry, and traditional high-throughput screening assays. The application is modular and flexible, with an interface that can be tuned to specific user roles. It offers user-friendly data visualization and reduction tools for HCS but also integrates Matlab for custom image analysis and the Konstanz Information Miner (KNIME) framework for data mining. Phaedra features efficient JPEG2000 compression and full drill-down functionality from dose-response curves down to individual cells, with exclusion and annotation options, cell classification, statistical quality controls, and reporting.

VLT Images the Horsehead Nebula

NASA Astrophysics Data System (ADS)

2002-01-01

Summary A new, high-resolution colour image of one of the most photographed celestial objects, the famous "Horsehead Nebula" (IC 434) in Orion, has been produced from data stored in the VLT Science Archive. The original CCD frames were obtained in February 2000 with the FORS2 multi-mode instrument at the 8.2-m VLT KUEYEN telescope on Paranal (Chile). The comparatively large field-of-view of the FORS2 camera is optimally suited to show this extended object and its immediate surroundings in impressive detail. PR Photo 02a/02 : View of the full field around the Horsehead Nebula. PR Photo 02b/02 : Enlargement of a smaller area around the Horse's "mouth" A spectacular object ESO PR Photo 02a/02 ESO PR Photo 02a/02 [Preview - JPEG: 400 x 485 pix - 63k] [Normal - JPEG: 800 x 970 pix - 896k] [Full-Res - JPEG: 1951 x 2366 pix - 4.7M] ESO PR Photo 02b/02 ESO PR Photo 02b/02 [Preview - JPEG: 400 x 501 pix - 91k] [Normal - JPEG: 800 x 1002 pix - 888k] [Full-Res - JPEG: 1139 x 1427 pix - 1.9M] Caption : PR Photo 02a/02 is a reproduction of a composite colour image of the Horsehead Nebula and its immediate surroundings. It is based on three exposures in the visual part of the spectrum with the FORS2 multi-mode instrument at the 8.2-m KUEYEN telescope at Paranal. PR Photo 02b/02 is an enlargement of a smaller area. Technical information about these photos is available below. PR Photo 02a/02 shows the famous "Horsehead Nebula" , which is situated in the Orion molecular cloud complex. Its official name is Barnard 33 and it is a dust protrusion in the southern region of the dense dust cloud Lynds 1630 , on the edge of the HII region IC 434 . The distance to the region is about 1400 light-years (430 pc). This beautiful colour image was produced from three images obtained with the multi-mode FORS2 instrument at the second VLT Unit Telescope ( KUEYEN ), some months after it had "First Light", cf. PR 17/99. The image files were extracted from the VLT Science Archive Facility and the photo constitutes a fine example of the subsequent use of such valuable data. Details about how the photo was made and some weblinks to other pictures are available below. The comparatively large field-of-view of the FORS2 camera (nearly 7 x 7 arcmin 2 ) and the detector resolution (0.2 arcsec/pixel) make this instrument optimally suited for imaging of this extended object and its immediate surroundings. There is obviously a wealth of detail, and scientific information can be derived from the colours shown in this photo. Three predominant colours are seen in the image: red from the hydrogen (H-alpha) emission from the HII region; brown for the foreground obscuring dust; and blue-green for scattered starlight. The blue-green regions of the Horsehead Nebula correspond to regions not shadowed from the light from the stars in the H II region to the top of the picture and scatter stellar radiation towards the observer; these are thus `mountains' of dust . The Horse's `mane' is an area in which there is less dust along the line-of-sight and the background (H-alpha) emission from ionized hydrogen atoms can be seen through the foreground dust. A chaotic area At the high resolution of this image the Horsehead appears very chaotic with many wisps and filaments and diffuse dust . At the top of the figure there is a bright rim separating the dust from the HII region. This is an `ionization front' where the ionizing photons from the HII region are moving into the cloud, destroying the dust and the molecules and heating and ionizing the gas. Dust and molecules can exist in cold regions of interstellar space which are shielded from starlight by very large layers of gas and dust. Astronomers refer to elongated structures, such as the Horsehead, as `elephant trunks' (never mind the zoological confusion!) which are common on the boundaries of HII regions. They can also be seen elsewhere in Orion - another well-known example is the pillars of M16 (the "Eagle Nebula") made famous by the fine HST image - a new infrared view by VLT and ISAAC of this area was published last month, cf. PR 25/01. Such structures are only temporary as they are being constantly eroded by the expanding region of ionized gas and are destroyed on timescales of typically a few thousand years. The Horsehead as we see it today will therefore not last forever and minute changes will become observable as the time passes. The surroundings To the east of the Horsehead (at the bottom of this image) there is ample evidence for star formation in the Lynds 1630 dark cloud . Here, the reflection nebula NGC 2023 surrounds the hot B-type star HD 37903 and some Herbig Haro objects are found which represent high-speed gas outflows from very young stars with masses of around a solar mass. The HII region to the west (top of picture) is ionized by the strong radiation from the bright star Sigma Orionis , located just below the southernmost star in Orion's Belt. The chain of dust and molecular clouds are part of the Orion A and B regions (also known as Orion's `sword' ). Other images of the Horsehead Nebula The Horsehead Nebula is a favourite object for amateur astrophotographers and large numbers of images are available on the WWW. Due to its significant extension and the limited field-of-view of some professional telescopes, fewer photographs are available from today's front-line facilities, except from specialized wide-field instruments like Schmidt telescopes, etc. The links below point to a number of prominent photos obtained elsewhere and some contain further useful links to other sites with more information about this splendid sky area. "Astronomy Picture of the Day" : http://antwrp.gsfc.nasa.gov/apod/ap971025.html Hubble Heritage image : http://hubble.stsci.edu/news_.and._views/pr.cgi?2001%2B12 INT Wide-Field image : http://www.ing.iac.es/PR/science/horsehead.htm NOT image : http://www.not.iac.es/new/general/photos/astronomical/ NOAO Wide-Field image : http://www.noao.edu/outreach/press/pr01/ir0101.html Bill Arnett's site : http://www.seds.org/billa/twn/b33x.html Technical information about the photos PR Photo 02a/02 was produced from three images, obtained on February 1, 2000, with the FORS2 multi-mode instrument at the 8.2-m KUEYEN Unit Telescope and extracted from the VLT Science Archive Facility. The frames were obtained in the B-band (600 sec exposure; wavelength 429 nm; FWHM 88 nm; here rendered as blue), V-band (300 sec; 554 nm; 112 nm; green) and R-band (120 sec; 655 nm; 165 nm; red) The original pixel size is 0.2 arcsec. The photo shows the full field recorded in all three colours, approximately 6.5 x 6.7 arcmin 2. The seeing was about 0.75 arcsec. PR Photo 02b/02 is an enlargement of a smaller area, measuring 3.8 x 4.1 arcmin 2. North is to the left and east is down (the usual orientation for showing this object). The frames were recorded with a TK2048 SITe CCD and the ESO-FIERA Controller, built by the Optical Detector Team (ODT). The images were prepared by Cyril Cavadore (ESO-ODT) , by means of Prism software. ESO PR Photos 02a-b/02 may be reproduced, if credit is given the European Southern Observatory (ESO).

Using Purpose-Built Functions and Block Hashes to Enable Small Block and Sub-file Forensics

DTIC Science & Technology

2010-01-01

JPEGs. We tested precarve using the nps-2009-canon2-gen6 (Garfinkel et al., 2009) disk image. The disk image was created with a 32 MB SD card and a...analysis of n-grams in the fragment. Fig. 1 e Usage of a 160 GB iPod reported by iTunes 8.2.1 (6) (top), as reported by the file system (bottom center), and...as computing with random sampling (bottom right). Note that iTunes usage actually in GiB, even though the program displays the “GB” label. Fig. 2 e

The Pixon Method for Data Compression Image Classification, and Image Reconstruction

NASA Technical Reports Server (NTRS)

Puetter, Richard; Yahil, Amos

2002-01-01

As initially proposed, this program had three goals: (1) continue to develop the highly successful Pixon method for image reconstruction and support other scientist in implementing this technique for their applications; (2) develop image compression techniques based on the Pixon method; and (3) develop artificial intelligence algorithms for image classification based on the Pixon approach for simplifying neural networks. Subsequent to proposal review the scope of the program was greatly reduced and it was decided to investigate the ability of the Pixon method to provide superior restorations of images compressed with standard image compression schemes, specifically JPEG-compressed images.

Non-linear Post Processing Image Enhancement

NASA Technical Reports Server (NTRS)

Hunt, Shawn; Lopez, Alex; Torres, Angel

1997-01-01

A non-linear filter for image post processing based on the feedforward Neural Network topology is presented. This study was undertaken to investigate the usefulness of "smart" filters in image post processing. The filter has shown to be useful in recovering high frequencies, such as those lost during the JPEG compression-decompression process. The filtered images have a higher signal to noise ratio, and a higher perceived image quality. Simulation studies comparing the proposed filter with the optimum mean square non-linear filter, showing examples of the high frequency recovery, and the statistical properties of the filter are given,

Content-based video retrieval by example video clip

NASA Astrophysics Data System (ADS)

Dimitrova, Nevenka; Abdel-Mottaleb, Mohamed

1997-01-01

This paper presents a novel approach for video retrieval from a large archive of MPEG or Motion JPEG compressed video clips. We introduce a retrieval algorithm that takes a video clip as a query and searches the database for clips with similar contents. Video clips are characterized by a sequence of representative frame signatures, which are constructed from DC coefficients and motion information (`DC+M' signatures). The similarity between two video clips is determined by using their respective signatures. This method facilitates retrieval of clips for the purpose of video editing, broadcast news retrieval, or copyright violation detection.

Improved Adaptive LSB Steganography Based on Chaos and Genetic Algorithm

NASA Astrophysics Data System (ADS)

Yu, Lifang; Zhao, Yao; Ni, Rongrong; Li, Ting

2010-12-01

We propose a novel steganographic method in JPEG images with high performance. Firstly, we propose improved adaptive LSB steganography, which can achieve high capacity while preserving the first-order statistics. Secondly, in order to minimize visual degradation of the stego image, we shuffle bits-order of the message based on chaos whose parameters are selected by the genetic algorithm. Shuffling message's bits-order provides us with a new way to improve the performance of steganography. Experimental results show that our method outperforms classical steganographic methods in image quality, while preserving characteristics of histogram and providing high capacity.

Application of M-JPEG compression hardware to dynamic stimulus production.

PubMed

Mulligan, J B

1997-01-01

Inexpensive circuit boards have appeared on the market which transform a normal micro-computer's disk drive into a video disk capable of playing extended video sequences in real time. This technology enables the performance of experiments which were previously impossible, or at least prohibitively expensive. The new technology achieves this capability using special-purpose hardware to compress and decompress individual video frames, enabling a video stream to be transferred over relatively low-bandwidth disk interfaces. This paper will describe the use of such devices for visual psychophysics and present the technical issues that must be considered when evaluating individual products.

Integration of radiographic images with an electronic medical record.

PubMed Central

Overhage, J. M.; Aisen, A.; Barnes, M.; Tucker, M.; McDonald, C. J.

2001-01-01

Radiographic images are important and expensive diagnostic tests. However, the provider caring for the patient often does not review the images directly due to time constraints. Institutions can use picture archiving and communications systems to make images more available to the provider, but this may not be the best solution. We integrated radiographic image review into the Regenstrief Medical Record System in order to address this problem. To achieve adequate performance, we store JPEG compressed images directly in the RMRS. Currently, physicians review about 5% of all radiographic studies using the RMRS image review function. PMID:11825241

Faintest Methane Brown Dwarf Discovered with the NTT and VLT

NASA Astrophysics Data System (ADS)

1999-08-01

A team of European astronomers [1] has found a cold and extremely faint object in interstellar space, high above the galactic plane. It is a Methane Brown Dwarf of which only a few are known. This is by far the most distant one identified to date. Brown Dwarfs are star-like objects which are heavier than planets but not massive enough to trigger the nuclear burning of hydrogen and other elements which powers normal stars. They are, nevertheless, heated during their formation by gravitational contraction but then continuously cool as this energy is radiated away. The so-called Methane Brown Dwarfs are the coolest members of the class detected so far, with temperatures around 700 °C, i.e. around 1000 degrees cooler than the coldest stars. The new object, provisionally known as NTTDF J1205-0744 , was found during a deep survey of a small sky region in the constellation Virgo (The Virgin), just south of the celestial equator. The chances of identifying a rare object like this in such a restricted area are very small and the astronomers readily admit that they must have been very lucky. This is the story of an (unexpected) astronomical discovery that may prove to be very important for galactic studies. It also demonstrates the power of modern observational techniques. The NTT Deep Field A long series of exposures of a small sky field in Virgo were made in 1997 and 1998 with the ESO 3.58-m New Technology Telescope (NTT) at La Silla. They were carried out with the aim of measuring and demonstrating the limiting performance of two astronomical instruments at this telescope, the SUperb-Seeing Imager (SUSI) in the visible part of the spectrum (0.35 - 1.00 µm), and the multi-mode Son of ISAAC (SOFI) in the near-infrared region (1.0 - 2.5 µm). The observed sky area measures only 2.3 x 2.3 arcmin 2 and is referred to as the NTT Deep Field. It has been studied in great detail, in particular to identify very distant galaxies for spectroscopic follow-up observations with the FORS1 and ISAAC instruments at the VLT 8.2-m ANTU telescope during the first period of VLT observations. Such distant objects are quite red (due to their high redshift) and are best detected by a combination of visible and infrared exposures. Discovery of an extremely infrared object ESO PR Photo 35a/99 ESO PR Photo 35a/99 [Preview - JPEG: 400 x 251 pix - 72k] [Normal - JPEG: 800 x 502 pix - 224k] [High-Res - JPEG: 3000 x 1881 pix - 1.7M] Caption to ESO PR Photo 35a/99 : Part of the NTT Deep Field , with the new Methane Brown Dwarf NTTDF J1205-0744 at the centre. The field measures 1.3 x 1.3 arcmin 2. The object is well visible in the SOFI infrared exposure (left) in the J-band at wavelength 1.25 µm, but not in the SUSI one at a shorter wavelength (right) in the i-band at 0.8 µm. North is up and East is left. The astronomers noted a star-like object of extreme colour in this field. While it was well visible and similarly bright in both SOFI infrared images (J = 20.2 and K = 20.3), it could not be seen at all on the SUSI images in the visible spectral region, even at the longest wavelength (i-band) observed with that instrument (i-J > 6 mag), cf. PR Photo 35a/99 . No "normal" object is known to have such extreme colours. The new object now received the designation NTTDF J1205-0744 , indicating that it was discovered in the NTT Deep Field at the given position on the sky. It seemed that there were only two possibilities. Either it was an extremely distant quasar (redshift about 8) at the edge of the observable universe, or it must be a very cold object in the Milky Way Galaxy. Whatever its nature, this was obviously a most interesting object. Spectroscopic observations of NTTDF J1205-0744 ESO PR Photo 35b/99 ESO PR Photo 35b/99 [Preview - JPEG: 400 x 337 pix - 56k] [Normal - JPEG: 800 x 674 pix - 124k] Caption to ESO PR Photo 35b/99 : The infrared spectrum of NTTDF J1205-0744 , as obtained with SOFI at the NTT and ISAAC at VLT ANTU, and compared to the spectrum of the much closer and brighter Methane Brown Dwarf Gliese 229B . This issue was resolved by obtaining infrared spectra of NTTDF J1205-0744 . Despite its faintness, initial observations with SOFI at the NTT covering the infrared J and H-bands already revealed some of the molecular absorptions characteristic of methane brown dwarfs. More recently, complementary longer wavelength observations with ISAAC at the first VLT 8.2-m Unit Telescope (ANTU) at Paranal have now confirmed the nature of this object. The combined SOFI/ISAAC infrared spectrum shown in PR Photo 35b/99 is clearly extremely similar to that of Gliese 229B , the first Methane Brown Dwarf discovered a few years ago and which is a member of a binary system at a distance of about 19 light-years. The features in the spectra result from strong absorption by methane (CH 4 ) and water (H 2 O). There is thus no doubt that NTTDF J1205-0744 is of the same type (stellar class T). Unlike Gliese 229B , however, it does not appear to be a member of a binary system. It is also 5-6 magnitudes (i.e., a factor of about 250) fainter than this and a few similar objects discovered recently in large-area sky surveys, implying that it is considerably more distant. Properties of NTTDF J1205-0744 NTTDF J1205-0744 is located at a distance of about 300 light-years (90 pc) and some 240 light-years (75 pc) above the plane of our Milky Way galaxy. Its mass is probably about 20-50 times that of Jupiter, or less than 2% of that of the Sun. Its temperature is around 700 °C (1000 K), suggesting an age of 500 to 1,000 million years. Lacking a stable source of energy at its centre, it is becoming continuously fainter and cooler and will continue to do so for tens of thousands of millions of years. NTTDF J1205-0744 is a very faint and small object indeed, on the still not well understood border zone between stars and planets [2]. How many Brown Dwarfs? How many T-class objects are there in the Milky Way? What is the space density of these extreme objects? Since only a few have been identified so far, any statistics must be quite uncertain. Until now, the best estimates have been of the order of 1 per 3,500 cubic light-years (0.01/pc 3 ). A surprising aspect of this discovery is that NTTDF J1205-0744 was found within a sky area of only 2.3 x 2.3 arcmin 2 , specially selected to be as "empty" as possible in order to facilitate studies of distant galaxies. Based on the above density estimate, the chance of finding such an object should only have been about 1%. Based on model predictions, the chance would have been even smaller than this. Searches like the one described here, based on the combination of optical and infrared data, therefore appear particularly effective at detecting such objects. It is now of high interest to test if this first discovery was just extremely lucky, or if the space density of these extreme objects is in fact much higher than expected. More information A research article about these new results ( Discovery of a faint Field Methane Brown Dwarf from ES0 NTT and VLT observations), will appear in the European journal Astronomy & Astrophysics . Note [1] The team consists of Jean Gabriel Cuby, Alan Moorwood, Sandro D'Odorico, Chris Lidman, Fernando Comeron, Jason Spyromilio (ESO) and Paolo Saracco (Osservatorio Astronomico di Brera, Merate, Milan, Italy). [2] A more nearby, hotter brown dwarf, KELU-1 , was found at La Silla in 1997 at a distance of 33 light-years, cf. ESO Press Release 07/97. How to obtain ESO Press Information ESO Press Information is made available on the World-Wide Web (URL: http://www.eso.org../ ). ESO Press Photos may be reproduced, if credit is given to the European Southern Observatory.

MITRE sensor layer prototype

NASA Astrophysics Data System (ADS)

Duff, Francis; McGarry, Donald; Zasada, David; Foote, Scott

2009-05-01

The MITRE Sensor Layer Prototype is an initial design effort to enable every sensor to help create new capabilities through collaborative data sharing. By making both upstream (raw) and downstream (processed) sensor data visible, users can access the specific level, type, and quantities of data needed to create new data products that were never anticipated by the original designers of the individual sensors. The major characteristic that sets sensor data services apart from typical enterprise services is the volume (on the order of multiple terabytes) of raw data that can be generated by most sensors. Traditional tightly coupled processing approaches extract pre-determined information from the incoming raw sensor data, format it, and send it to predetermined users. The community is rapidly reaching the conclusion that tightly coupled sensor processing loses too much potentially critical information.1 Hence upstream (raw and partially processed) data must be extracted, rapidly archived, and advertised to the enterprise for unanticipated uses. The authors believe layered sensing net-centric integration can be achieved through a standardize-encapsulate-syndicateaggregate- manipulate-process paradigm. The Sensor Layer Prototype's technical approach focuses on implementing this proof of concept framework to make sensor data visible, accessible and useful to the enterprise. To achieve this, a "raw" data tap between physical transducers associated with sensor arrays and the embedded sensor signal processing hardware and software has been exploited. Second, we encapsulate and expose both raw and partially processed data to the enterprise within the context of a service-oriented architecture. Third, we advertise the presence of multiple types, and multiple layers of data through geographic-enabled Really Simple Syndication (GeoRSS) services. These GeoRSS feeds are aggregated, manipulated, and filtered by a feed aggregator. After filtering these feeds to bring just the type and location of data sought by multiple processes to the attention of each processing station, just that specifically sought data is downloaded to each process application. The Sensor Layer Prototype participated in a proof-of-concept demonstration in April 2008. This event allowed multiple MITRE innovation programs to interact among themselves to demonstrate the ability to couple value-adding but previously unanticipated users to the enterprise. For this event, the Sensor Layer Prototype was used to show data entering the environment in real time. Multiple data types were encapsulated and added to the database via the Sensor Layer Prototype, specifically National Imagery Transmission Format 2.1 (NITF), NATO Standardization Format 4607 (STANAG 4607), Cursor-on-Target (CoT), Joint Photographic Experts Group (JPEG), Hierarchical Data Format (HDF5) and several additional sensor file formats describing multiple sensors addressing a common scenario.

And Then There Were Three...!

NASA Astrophysics Data System (ADS)

2000-01-01

VLT MELIPAL Achieves Successful "First Light" in Record Time This was a night to remember at the ESO Paranal Observatory! For the first time, three 8.2-m VLT telescopes were observing in parallel, with a combined mirror surface of nearly 160 m 2. In the evening of January 26, the third 8.2-m Unit Telescope, MELIPAL ("The Southern Cross" in the Mapuche language), was pointed to the sky for the first time and successfully achieved "First Light". During this night, a number of astronomical exposures were made that served to evaluate provisionally the performance of the new telescope. The ESO staff expressed great satisfaction with MELIPAL and there were broad smiles all over the mountain. The first images ESO PR Photo 04a/00 ESO PR Photo 04a/00 [Preview - JPEG: 400 x 352 pix - 95k] [Normal - JPEG: 800 x 688 pix - 110k] Caption : ESO PR Photo 04a/00 shows the "very first light" image for MELIPAL . It is that of a relatively bright star, as recorded by the Guide Probe at about 21:50 hrs local time on January 26, 2000. It is a 0.1 sec exposure, obtained after preliminary adjustment of the optics during a few iterations with the computer controlled "active optics" system. The image quality is measured as 0.46 arcsec FWHM (Full-Width at Half Maximum). ESO PR Photo 04b/00 ESO PR Photo 04b/00 [Preview - JPEG: 400 x 429 pix - 39k] [Normal - JPEG: 885 x 949 pix - 766k] Caption : ESO PR Photo 04b/00 shows the central region of the Crab Nebula, the famous supernova remnant in the constellation Taurus (The Bull). It was obtained early in the night of "First Light" with the third 8.2-m VLT Unit Telescope, MELIPAL . It is a composite of several 30-sec exposures with the VLT Test Camera in three broad-band filters, B (here rendered as blue; most synchrotron emission), V (green) and R (red; mostly emission from hydrogen atoms). The Crab Pulsar is visible to the left; it is the lower of the two brightest stars near each other. The image quality is about 0.9 arcsec, and is completely determined by the external seeing caused by the atmospheric turbulence above the telescope at the time of the observation. The coloured, vertical lines to the left are artifacts of a "bad column" of the CCD. The field measures about 1.3 x 1.3 arcmin 2. This image may be compared with that of the same area that was recently obtained with the FORS2 instrument at KUEYEN ( PR Photo 40g/99 ). Following two days of preliminary adjustments after the installation of the secondary mirror, cf. ESO PR Photos 03a-n/00 , MELIPAL was pointed to the sky above Paranal for the first time, soon after sunset in the evening of January 26. The light of a bright star was directed towards the Guide Probe camera, and the VLT Commissioning Team, headed by Dr. Jason Spyromilio , initiated the active optics procedure . This adjusts the 150 computer-controlled supports under the main 8.2-m Zerodur mirror as well as the position of the secondary 1.1-m Beryllium mirror. After just a few iterations, the optical quality of the recorded stellar image was measured as 0.46 arcsec ( PR Photo 04a/00 ), a truly excellent value, especially at this stage! Immediately thereafter, at 22:16 hrs local time (i.e., at 01:16 hrs UT on January 27), the shutter of the VLT Test Camera at the Cassegrain focus was opened. A 1-min exposure was made through a R(ed) optical filter of a distant star cluster in the constellation Eridanus (The River). The light from its faint stars was recorded by the CCD at the focal plane and the resulting frame was read into the computer. Despite the comparatively short exposure time, myriads of stars were seen when this "first frame" was displayed on the computer screen. Moreover, the sizes of these images were found to be virtually identical to the 0.6 arcsec seeing measured simultaneously with a monitor telescope, outside the telescope enclosure. This confirmed that MELIPAL was in very good shape. Nevertheless, these very first images were still slightly elongated and further optical adjustments and tests were therefore made to eliminate this unwanted effect. It is a tribute to the extensive experience and fine skills of the ESO staff that within only 1 hour, a 30 sec exposure of the central region of the Crab Nebula in Taurus with round images was obtained, cf. PR Photo 04b/00 . The ESO Director General, Dr. Catherine Cesarsky , who assumed her function in September 1999, was present in the Control Room during these operations. She expressed great satisfaction with the excellent result and warmly congratulated the ESO staff to this achievement. She was particularly impressed with the apparent ease with which a completely new telescope of this size could be adjusted in such a short time. A part of her statement on this occasion was recorded on ESO PR Video Clip 02/00 that accompanies this Press Release. Three telescopes now in operation at Paranal At 02:30 UT on January 27, 2000, three VLT Unit Telescopes were observing in parallel, with measured seeing values of 0.6 arcsec ( ANTU - "The Sun"), 0.7 arcsec ( KUEYEN -"The Moon") and 0.7 arcsec ( MELIPAL ). MELIPAL has now joined ANTU and KUEYEN that had "First Light" in May 1998 and March 1999, respectively. The fourth VLT Unit Telescope, YEPUN ("Sirius") will become operational later this year. While normal scientific observations continue with ANTU , the UVES and FORS2 astronomical instruments are now being commissioned at KUEYEN , before this telescope will be handed over to the astronomers on April 1, 2000. The telescope commissioning period will now start for MELIPAL , after which its first instrument, VIMOS will be installed later this year. Impressions from the MELIPAL "First Light" event First Light for MELIPAL ESO PR Video Clip 02/00 "First Light for MELIPAL" (3350 frames/2:14 min) [MPEG Video+Audio; 160x120 pix; 3.1Mb] [MPEG Video+Audio; 320x240 pix; 9.4 Mb] [RealMedia; streaming; 34kps] [RealMedia; streaming; 200kps] ESO Video Clip 02/00 shows sequences from the Control Room at the Paranal Observatory, recorded with a fixed TV-camera on January 27 at 03:00 UT, soon after the moment of "First Light" with the third 8.2-m VLT Unit Telescope ( MELIPAL ). The video sequences were transmitted via ESO's dedicated satellite communication link to the Headquarters in Garching for production of the Clip. It begins with a statement by the Manager of the VLT Project, Dr. Massimo Tarenghi , as exposures of the Crab Nebula are obtained with the telescope and the raw frames are successively displayed on the monitor screen. In a following sequence, ESO's Director General, Dr. Catherine Cesarsky , briefly relates the moment of "First Light" for MELIPAL , as she experienced it at the telescope controls. ESO Press Photo 04c/00 ESO Press Photo 04c/00 [Preview; JPEG: 400 x 300; 44k] [Full size; JPEG: 1600 x 1200; 241k] The computer screen with the image of a bright star, as recorded by the Guide Probe in the early evening of January 26; see also PR Photo 04a/00. This image was used for the initial adjustments by means of the active optics system. (Digital Photo). ESO Press Photo 04d/00 ESO Press Photo 04d/00 [Preview; JPEG: 400 x 314; 49k] [Full size; JPEG: 1528 x 1200; 189k] ESO staff at the moment of "First Light" for MELIPAL in the evening of January 26. The photo was made in the wooden hut on the telescope observing floor from where the telescope was controlled during the first hours. (Digital Photo). ESO PR Photos may be reproduced, if credit is given to the European Southern Observatory. The ESO PR Video Clips service to visitors to the ESO website provides "animated" illustrations of the ongoing work and events at the European Southern Observatory. The most recent clip was: ESO PR Video Clip 01/00 with aerial sequences from Paranal (12 January 2000). Information is also available on the web about other ESO videos.

Cannibal Stars Cause Giant Explosions in Fornax Cluster Galaxy

NASA Astrophysics Data System (ADS)

2000-07-01

The VLT Observes Most Remote Novae Ever Seen About 70 million years ago, when dinosaurs were still walking on the Earth, a series of violent thermo-nuclear explosions took place in a distant galaxy. After a very long travel across vast reaches of virtually empty space (70 million light-years, or ~ 7 x 10 20 km), dim light carrying the message about these events has finally reached us. It was recorded by the ESO Very Large Telescope (VLT) at the Paranal Observatory (Chile) during an observing programme by a group of Italian astronomers [1]. The subsequent analysis has shown that the observers witnessed the most distant nova outbursts ever seen . They were caused by "stellar cannibalism" in binary systems in which one relatively cool star loses matter to its smaller and hotter companion. An instability results that leads to the ignition of a "hydrogen bomb" on the surface of the receiving star. The "Stella Nova" Phenomenon A stellar outburst of the type now observed with the VLT is referred to as a "Stella Nova" ("new star" in Latin), or just "Nova" . Novae caused by explosions in binary stars in our home galaxy, the Milky Way system, are relatively frequent and about every second or third year one of them is bright enough to be easily visible with the naked eye. For our ancestors, who had no means to see the faint binary star before the explosion, it looked as if a new star had been born in the sky, hence the name. The most common nova explosion occurs in a binary stellar system in which a white dwarf (a very dense and hot, compact star with a mass comparable to that of the Sun and a size like the Earth) accretes hydrogen from a cooler and larger red dwarf star [2]. As the hydrogen collects on the surface of the white dwarf star, it becomes progressively hotter until a thermonuclear explosion is ignited at the bottom of the collected gas. A huge amount of energy is released and causes a million-fold increase in the brightness of the binary system within a few hours. After reaching maximum light within some days or weeks, it begins to fade as the hydrogen supply is exhausted and blown into space. The processed material is ejected at high speeds, up to ~1000 km/sec, and may later be visible as an expanding shell of emitting gas. Altogether, the tremendous flash of light involves the release of about 10 45 ergs in a few weeks, or about as much energy as our Sun produces in 10,000 years. Supernovae explosions that completely destroy heavier stars at the end of their lives are even more powerful. However, in contrast to supernovae and despite the colossal energy production, the progenitor of a nova is not destroyed during the explosion. Some time after an outburst, transfer of hydrogen from the companion star begins anew, and the process repeats itself with explosions taking place about once every 100,000 years. The nova star will finally die of "old age" when the cool companion has been completely cannibalized. Novae as Distance Indicators Due to their exceptional luminosity, novae can be used as powerful beacons that allow relative distances to different types of galaxies to be measured. The measurement is based on the assumption that novae of the same type are intrinsically equally bright, together with the physical law that states that an object's observed brightness decreases with the square of the distance to the observer. Thus, if we observe that a nova in a certain galaxy is one million times fainter than a nearby one, we know that it must be one thousand times more distant. In addition, observations of novae in other galaxies shed light on the history of formation of their stars. Despite their scientific importance, surveys of novae in distant, rich clusters of galaxies have not been very popular among astronomers. Major reasons are probably the inherent observational difficulties and the comparatively low rates of discovery. In the past, with 4-m class telescopes, tens of hours of monitoring of several galaxies have indeed been necessary to detect a few distant novae [3]. VLT observations of NGC 1316 in the Fornax Cluster ESO PR Photo 18a/00 ESO PR Photo 18a/00 [Preview - JPEG: 400 x 448 pix - 28k] [Normal - JPEG: 800 x 895 pix - 136k] [Full-Res - JPEG: 1941 x 2172 pix - 904k] Caption : Colour composite photo of the central area of NGC 1316 , a giant elliptical galaxy in the Fornax cluster of galaxies. Many dark dust clouds and lanes are visible. Some of the star-like objects in the field are globular clusters of stars that belong to the galaxy. It is based on CCD exposures, obtained with the 8.2-m VLT/ANTU telescope and the FORS-1 multi-mode instrument through B (blue), V (green-yellow) and I (here rendered as red) filters, respectively. The "pyramids" above and below the bright centre of the galaxy and the vertical lines at some of the brighter stars are caused by overexposure ("CCD bleeding"). The field measures 6.8 x 6.8 arcmin 2 , with 0.2 arcsec/pixel. The image quality of this composite is about 0.9 arcsec. North is up and East is left. NGC 1316 is a giant "dusty" galaxy ( PR Photo 18a/00 ), located in the Fornax cluster seen in the southern constellation of that name ("The Oven"). This galaxy is of special interest in connection with current attempts to establish an accurate distance scale in the Universe. In 1980 and 1981, NGC 1316 was the host of two supernovae of type Ia , a class of object that is widely used as a "cosmological standard candle" to determine the distance to very distant galaxies, cf. ESO PR 21/98. A precise measurement of the distance to NGC 1316 may therefore provide an independent calibration of the intrinsic brightness of these supernovae. The new observations were performed during 8 nights distributed over the period from January 9 to 19, 2000. They were made in service mode at the 8.2-m VLT/ANTU telescope with the FORS-1 multi-mode instrument, using a 2k x 2k CCD camera with 0.2 arcsec pixels and a field of 6.8 x 6.8 arcmin 2. The exposures lasted 20 min and were carried out with three optical filters (B, V and I). The most distant Novae observed so far ESO PR Photo 18b/00 ESO PR Photo 18b/00 [Preview - JPEG: 400 x 452 pix - 83k] [Normal - JPEG: 800 x 904 pix - 224k] ESO PR Photo 18c/00 ESO PR Photo 18c/00 [Preview - JPEG: 400 x 458 pix - 54k] [Normal - JPEG: 800 x 916 pix - 272k] Caption : Images of two of the novae in NGC 1316 that were discovered during the observational programme described in this Press Release. Both composites show the blue images (B-filter) obtained on January 9 (upper left), 12 (upper right), 15 (lower left) and 19 (lower right), 2000, respectively. The decline of the brightness of the objects is obvious. An analysis of the images that were obtained in blue light (B-filter) resulted in the detection of four novae. They were identified because of the typical change of brightness over the observation period, cf. PR Photos 18b-c/00 , as well as their measured colours. Although the time-consuming reduction of the data and the subsequent astrophysical interpretation is still in progress, the astronomers are already now very satisfied with the outcome. In particular, no less than four novae were detected in a single giant galaxy within only 11 days . This implies a rate of approximately 100 novae/year in NGC 1316, or about 3 times larger than the rate estimated for the Milky Way galaxy. This may (at least partly) be due to the fact that NGC 1316 is of a different type and contains more stars than our own galaxy. The novae in NGC 1316 are quite faint, of about magnitude 24 and decreasing towards 25-26 during the period of observation. This corresponds to nearly 100 million times fainter than what can be seen with the naked eye. The corresponding distance to NGC 1316 is found to be about 70 million light-years . Moreover, the discovery of four novae in one galaxy in the Fornax cluster was possible with only 3 hours of observing time per filter. This clearly shows that the new generation of 8-m class telescopes like the VLT, equipped with the new and large detectors, is able to greatly improve the efficiency of this type of astronomical investigations (by a factor of 10 or more) , as compared to previous searches with 4-m telescopes. The road is now open for exhaustive searches for novae in remote galaxies, with all the resulting benefits, also for the accurate determination of the extragalactic distance scale. Notes [1]: The group consists of Massimo Della Valle (Osservatorio Astrofisico di Arcetri, Firenze, Italy), Roberto Gilmozzi and Rodolfo Viezzer (both ESO). [2]: A graphical illustration of the nova phenomenon can be found at this website. [3]: For example, in 1987, Canadian astronomers Christopher Pritchet and Sidney van den Bergh , in an heroic tour de force with the 4-m Canada-France-Hawaii telescope, found 9 novae after 56 hours of monitoring of 3 giant elliptical galaxies in the Virgo cluster of galaxies.

Baseline coastal oblique aerial photographs collected from Pensacola, Florida, to Breton Islands, Louisiana, February 7, 2012

USGS Publications Warehouse

Morgan, Karen L.M.; Krohn, M. Dennis; Doran, Kara; Guy, Kristy K.

2013-01-01

The U.S. Geological Survey (USGS) conducts baseline and storm response photography missions to document and understand the changes in vulnerability of the Nation's coasts to extreme storms (Morgan, 2009). On February 7, 2012, the USGS conducted an oblique aerial photographic survey from Pensacola, Fla., to Breton Islands, La., aboard a Piper Navajo Chieftain at an altitude of 500 feet (ft) and approximately 1,000 ft offshore. This mission was flown to collect baseline data for assessing incremental changes since the last survey, and the data can be used in the assessment of future coastal change. The photographs provided here are Joint Photographic Experts Group (JPEG) images. The photograph locations are an estimate of the position of the aircraft and do not indicate the location of the feature in the images (see the Navigation Data page). These photos document the configuration of the barrier islands and other coastal features at the time of the survey. The header of each photo is populated with time of collection, Global Positioning System (GPS) latitude, GPS longitude, GPS position (latitude and longitude), keywords, credit, artist (photographer), caption, copyright, and contact information using EXIFtools (Subino and others, 2012). Photographs can be opened directly with any JPEG-compatible image viewer by clicking on a thumbnail on the contact sheet. Table 1 provides detailed information about the assigned location, name, data, and time the photograph was taken along with links to the photograph. In addition to the photographs, a Google Earth Keyhole Markup Language (KML) file is provided and can be used to view the images by clicking on the marker and then clicking on either the thumbnail or the link above the thumbnail. The KML files were created using the photographic navigation files (see the Photos and Maps page).

JHelioviewer: Open-Source Software for Discovery and Image Access in the Petabyte Age

NASA Astrophysics Data System (ADS)

Mueller, D.; Dimitoglou, G.; Garcia Ortiz, J.; Langenberg, M.; Nuhn, M.; Dau, A.; Pagel, S.; Schmidt, L.; Hughitt, V. K.; Ireland, J.; Fleck, B.

2011-12-01

The unprecedented torrent of data returned by the Solar Dynamics Observatory is both a blessing and a barrier: a blessing for making available data with significantly higher spatial and temporal resolution, but a barrier for scientists to access, browse and analyze them. With such staggering data volume, the data is accessible only from a few repositories and users have to deal with data sets effectively immobile and practically difficult to download. From a scientist's perspective this poses three challenges: accessing, browsing and finding interesting data while avoiding the proverbial search for a needle in a haystack. To address these challenges, we have developed JHelioviewer, an open-source visualization software that lets users browse large data volumes both as still images and movies. We did so by deploying an efficient image encoding, storage, and dissemination solution using the JPEG 2000 standard. This solution enables users to access remote images at different resolution levels as a single data stream. Users can view, manipulate, pan, zoom, and overlay JPEG 2000 compressed data quickly, without severe network bandwidth penalties. Besides viewing data, the browser provides third-party metadata and event catalog integration to quickly locate data of interest, as well as an interface to the Virtual Solar Observatory to download science-quality data. As part of the ESA/NASA Helioviewer Project, JHelioviewer offers intuitive ways to browse large amounts of heterogeneous data remotely and provides an extensible and customizable open-source platform for the scientific community. In addition, the easy-to-use graphical user interface enables the general public and educators to access, enjoy and reuse data from space missions without barriers.

Artifacts in slab average-intensity-projection images reformatted from JPEG 2000 compressed thin-section abdominal CT data sets.

PubMed

Kim, Bohyoung; Lee, Kyoung Ho; Kim, Kil Joong; Mantiuk, Rafal; Kim, Hye-ri; Kim, Young Hoon

2008-06-01

The objective of our study was to assess the effects of compressing source thin-section abdominal CT images on final transverse average-intensity-projection (AIP) images. At reversible, 4:1, 6:1, 8:1, 10:1, and 15:1 Joint Photographic Experts Group (JPEG) 2000 compressions, we compared the artifacts in 20 matching compressed thin sections (0.67 mm), compressed thick sections (5 mm), and AIP images (5 mm) reformatted from the compressed thin sections. The artifacts were quantitatively measured with peak signal-to-noise ratio (PSNR) and a perceptual quality metric (High Dynamic Range Visual Difference Predictor [HDR-VDP]). By comparing the compressed and original images, three radiologists independently graded the artifacts as 0 (none, indistinguishable), 1 (barely perceptible), 2 (subtle), or 3 (significant). Friedman tests and exact tests for paired proportions were used. At irreversible compressions, the artifacts tended to increase in the order of AIP, thick-section, and thin-section images in terms of PSNR (p < 0.0001), HDR-VDP (p < 0.0001), and the readers' grading (p < 0.01 at 6:1 or higher compressions). At 6:1 and 8:1, distinguishable pairs (grades 1-3) tended to increase in the order of AIP, thick-section, and thin-section images. Visually lossless threshold for the compression varied between images but decreased in the order of AIP, thick-section, and thin-section images (p < 0.0001). Compression artifacts in thin sections are significantly attenuated in AIP images. On the premise that thin sections are typically reviewed using an AIP technique, it is justifiable to compress them to a compression level currently accepted for thick sections.

A visual detection model for DCT coefficient quantization

NASA Technical Reports Server (NTRS)

Ahumada, Albert J., Jr.; Watson, Andrew B.

1994-01-01

The discrete cosine transform (DCT) is widely used in image compression and is part of the JPEG and MPEG compression standards. The degree of compression and the amount of distortion in the decompressed image are controlled by the quantization of the transform coefficients. The standards do not specify how the DCT coefficients should be quantized. One approach is to set the quantization level for each coefficient so that the quantization error is near the threshold of visibility. Results from previous work are combined to form the current best detection model for DCT coefficient quantization noise. This model predicts sensitivity as a function of display parameters, enabling quantization matrices to be designed for display situations varying in luminance, veiling light, and spatial frequency related conditions (pixel size, viewing distance, and aspect ratio). It also allows arbitrary color space directions for the representation of color. A model-based method of optimizing the quantization matrix for an individual image was developed. The model described above provides visual thresholds for each DCT frequency. These thresholds are adjusted within each block for visual light adaptation and contrast masking. For given quantization matrix, the DCT quantization errors are scaled by the adjusted thresholds to yield perceptual errors. These errors are pooled nonlinearly over the image to yield total perceptual error. With this model one may estimate the quantization matrix for a particular image that yields minimum bit rate for a given total perceptual error, or minimum perceptual error for a given bit rate. Custom matrices for a number of images show clear improvement over image-independent matrices. Custom matrices are compatible with the JPEG standard, which requires transmission of the quantization matrix.

Real-time 3D video compression for tele-immersive environments

NASA Astrophysics Data System (ADS)

Yang, Zhenyu; Cui, Yi; Anwar, Zahid; Bocchino, Robert; Kiyanclar, Nadir; Nahrstedt, Klara; Campbell, Roy H.; Yurcik, William

2006-01-01

Tele-immersive systems can improve productivity and aid communication by allowing distributed parties to exchange information via a shared immersive experience. The TEEVE research project at the University of Illinois at Urbana-Champaign and the University of California at Berkeley seeks to foster the development and use of tele-immersive environments by a holistic integration of existing components that capture, transmit, and render three-dimensional (3D) scenes in real time to convey a sense of immersive space. However, the transmission of 3D video poses significant challenges. First, it is bandwidth-intensive, as it requires the transmission of multiple large-volume 3D video streams. Second, existing schemes for 2D color video compression such as MPEG, JPEG, and H.263 cannot be applied directly because the 3D video data contains depth as well as color information. Our goal is to explore from a different angle of the 3D compression space with factors including complexity, compression ratio, quality, and real-time performance. To investigate these trade-offs, we present and evaluate two simple 3D compression schemes. For the first scheme, we use color reduction to compress the color information, which we then compress along with the depth information using zlib. For the second scheme, we use motion JPEG to compress the color information and run-length encoding followed by Huffman coding to compress the depth information. We apply both schemes to 3D videos captured from a real tele-immersive environment. Our experimental results show that: (1) the compressed data preserves enough information to communicate the 3D images effectively (min. PSNR > 40) and (2) even without inter-frame motion estimation, very high compression ratios (avg. > 15) are achievable at speeds sufficient to allow real-time communication (avg. ~ 13 ms per 3D video frame).

47 CFR 1.913 - Application and notification forms; electronic and manual filing.

Code of Federal Regulations, 2010 CFR

2010-10-01

... Portable Document Format (PDF) whenever possible. (2) Any associated documents submitted with an... possible. The attachment should be uploaded via ULS in Adobe Acrobat Portable Document Format (PDF... the table of contents, should be in Adobe Acrobat Portable Document Format (PDF) whenever possible...

New Fast Lane towards Discoveries of Clusters of Galaxies Inaugurated

NASA Astrophysics Data System (ADS)

2003-07-01

Space and Ground-Based Telescopes Cooperate to Gain Deep Cosmological Insights Summary Using the ESA XMM-Newton satellite, a team of European and Chilean astronomers [2] has obtained the world's deepest "wide-field" X-ray image of the cosmos to date. This penetrating view, when complemented with observations by some of the largest and most efficient ground-based optical telescopes, including the ESO Very Large Telescope (VLT), has resulted in the discovery of several large clusters of galaxies. These early results from an ambitious research programme are extremely promising and pave the way for a very comprehensive and thorough census of clusters of galaxies at various epochs. Relying on the foremost astronomical technology and with an unequalled observational efficiency, this project is set to provide new insights into the structure and evolution of the distant Universe. PR Photo 19a/03: First image from the XMM-LSS survey. PR Photo 19b/03: Zoom-in on PR Photo 19b/03. PR Photo 19c/03: XMM-Newton contour map of the probable extent of a cluster of galaxies, superimposed upon a CHFT I-band image. PR Photo 19d/03: Velocity distribution in the cluster field shown in PR Photo 19c/03. The universal web Unlike grains of sand on a beach, matter is not uniformly spread throughout the Universe. Instead, it is concentrated into galaxies which themselves congregate into clusters (and even clusters of clusters). These clusters are "strung" throughout the Universe in a web-like structure, cf. ESO PR 11/01. Our Galaxy, the Milky Way, for example, belongs to the so-called Local Group which also comprises "Messier 31", the Andromeda Galaxy. The Local Group contains about 30 galaxies and measures a few million light-years across. Other clusters are much larger. The Coma cluster contains thousands of galaxies and measures more than 20 million light-years. Another well known example is the Virgo cluster, covering no less than 10 degrees on the sky ! Clusters of galaxies are the most massive bound structures in the Universe. They have masses of the order of one thousand million million times the mass of our Sun. Their three-dimensional space distribution and number density change with cosmic time and provide information about the main cosmological parameters in a unique way. About one fifth of the optically invisible mass of a cluster is in the form of a diffuse hot gas in between the galaxies. This gas has a temperature of the order of several tens of million degrees and a density of the order of one atom per liter. At such high temperatures, it produces powerful X-ray emission. Observing this intergalactic gas and not just the individual galaxies is like seeing the buildings of a city in daytime, not just the lighted windows at night. This is why clusters of galaxies are best discovered using X-ray satellites. Using previous X-ray satellites, astronomers have performed limited studies of the large-scale structure of the nearby Universe. However, they so far lacked the instruments to extend the search to large volumes of the distant Universe. The XMM-Newton wide-field observations ESO PR Photo 19a/03 ESO PR Photo 19a/03 [Preview - JPEG: 575 x 400 pix - 52k [Normal - JPEG: 1130 x 800 pix - 420k] ESO PR Photo 19b/03 ESO PR Photo 19b/03 [Preview - JPEG: 400 x 489 pix - 52k [Normal - JPEG: 800 x 978 pix - 464k] Captions: PR Photo 19a/03 is the first image from the XMM-LSS X-Ray survey. It is actually a combination of fourteen separate "pointings" of this space observatory. It represents a region of the sky eight times larger than the full Moon and contains around 25 clusters. The circles represent the X-Ray sources previously known from the 1991 ROSAT All-Sky Survey. PR Photo 19b/03 zooms in on a particularly interesting region of the image shown in ESO PR Photo 19a/03 with a possible cluster identified (in box). Each point on this graph represents a single X-ray photon detected by XMM-Newton. Marguerite Pierre (CEA Saclay, France), with a European/Chilean team of astronomers known as the XMM-LSS consortium [2], used the large field-of-view and the high sensitivity of ESA's X-ray observatory XMM-Newton to search for remote clusters of galaxies and map out their distribution in space. They could see back about 7,000 million years to a cosmological era when the Universe was about half its present size and age, when clusters of galaxies were more tightly packed. Tracking down the clusters is a painstaking, multi-step process, requiring both space and ground-based telescopes. Indeed, from X-ray images with XMM, it was possible to select several tens of cluster candidate objects, identified as areas of enhanced X-radiation (cf PR Photo 19b/03). But having candidates is not enough ! They must be confirmed and further studied with ground-based telescopes. In tandem with XMM-Newton, Pierre uses the very-wide-field imager attached to the 4-m Canada-France-Hawaii Telescope, on Mauna Kea, Hawaii, to take an optical snapshot of the same region of space. A tailor-made computer programme then combs the XMM-Newton data looking for concentrations of X-rays that suggest large, extended structures. These are the clusters and represent only about 10% of the detected X-ray sources. The others are mostly distant active galaxies. Back to the Ground ESO PR Photo 19c/03 ESO PR Photo 19c/03 [Preview - JPEG: 400 x 481 pix - 84k [Normal - JPEG: 800 x 961 pix - 1M] ESO PR Photo 19d/03 ESO PR Photo 19d/03 [Preview - JPEG: 400 x 488 pix - 44k [Normal - JPEG: 800 x 976 pix - 520k] Captions: PR Photo 19c/03 represents the XMM-Newton X-ray contour map of the cluster's probable extent superimposed upon the CFHT I-band image. A concentration of distant galaxies is conspicuous, thus confirming the X-ray detection. The symbols indicate the galaxies which have been subject to a subsequent spectroscopic measurement and found to be cluster members (triangles flag emission line galaxies). The individual galaxies in the cluster can then be targeted for further observations with ESO's VLT, in order to measure its distance and locate the cluster in the universe. Following the X-ray discovery and the optical cluster identification, galaxies in the cluster field shown in ESO PR Photo 19c/03 have been spectroscopically observed at the ESO VLT using the FORS2 instrument in order to determine the cluster redshift [3]. Using two masks, each of them observed during one hour, allowing to take the spectra of 16 emission-line galaxies at a time, the cluster was found to have a redshift of 0.84, corresponding to a distance of 8,000 million light-years, and a velocity dispersion of 750 km/s. PR Photo 19d/03 shows the measured velocity distribution. This is one of the most distant known clusters of galaxies for which a velocity dispersion has been measured. When the programme finds a cluster, it zooms in on that region and converts the XMM-Newton data into a contour map of X-ray intensity, which is then superimposed upon the CFHT optical image (PR Photo 19c/03). The astronomers use this to check if anything is visible within the area of extented X-ray emission. If something is seen, the work then shifts to one of the world's prime optical/infrared telescopes, the European Southern Observatory's Very Large Telescope (VLT) at Paranal (Chile). By means of the FORS multi-mode instruments, the astronomers zoom-in on the individual galaxies in the field, taking spectral measurements that reveal their overall characteristics, in particular their redshift and hence, distance. Cluster galaxies have similar distances and these measurement ultimately provide, by averaging, the cluster's distance as well as the velocity dispersion in the cluster. The FORS instruments are among the most efficient and versatile for this type of work, taking on the average spectra of 30 galaxies at a time. The first spectroscopic observations dedicated to the identification and redshift measurement of the XMM-LSS galaxy clusters took place during three nights in the fall of 2002. As of March 2003, there were only 5 known clusters in the literature at such a large redshift with enough spectroscopically measured redshifts to allow an estimate of the velocity dispersion. But the VLT allowed obtaining the dispersion in a distant cluster in 2 hours only, raising great expectations for future work. 700 spectra... Marguerite Pierre is extremely content : Weather and working conditions at the VLT were optimal. In three nights only, 12 cluster fields were observed, yielding no less than 700 spectra of galaxies. The overall strategy proved very successful. The high observing efficiency of the VLT and FORS support our plan to perform follow-up studies of large numbers of distant clusters with relatively little observing time. This represents a most substantial increase in efficiency compared to former searches. The present research programme has begun well, clearly demonstrating the feasibility of this new multi-telescope approach and its very high efficiency. And Marguerite Pierre and her colleagues are already seeing the first tantalising results: it seems to confirm that the number of clusters 7,000 million years ago is little different from that of today. This particular behaviour is predicted by models of the Universe that expand forever, driving the galaxy clusters further and further apart. Equally important, this multi-wavelength, multi-telescope approach developed by the XMM-LSS consortium to locate clusters of galaxies also constitutes a decisive next step in the fertile synergy between space and ground-based observatories and is therefore a basic building block of the forthcoming Virtual Observatory. More information This work is based on two papers to be published in the professional astronomy journal, Astronomy and Astrophysics (The XMM-LSS survey : I. Scientific motivations, design and first results by Marguerite Pierre et al., astro-ph/0305191 and The XMM-LSS survey : II. First high redshift galaxy clusters: relaxed and collapsing systems by Ivan Valtchanov et al., astro-ph/0305192). Dr. M. Pierre will give an invited talk on this subject at the IAU Symposium 216 - Maps of the Cosmos - this Thursday July 17, 2003 during the IAU General Assembly 2003 in Sydney, Australia.

The Most Remote Gamma-Ray Burst

NASA Astrophysics Data System (ADS)

2000-10-01

ESO Telescopes Observe "Lightning" in the Young Universe Summary Observations with telescopes at the ESO La Silla and Paranal observatories (Chile) have enabled an international team of astronomers [1] to measure the distance of a "gamma-ray burst", an extremely violent, cosmic explosion of still unknown physical origin. It turns out to be the most remote gamma-ray burst ever observed . The exceedingly powerful flash of light from this event was emitted when the Universe was very young, less than about 1,500 million years old, or only 10% of its present age. Travelling with the speed of light (300,000 km/sec) during 11,000 million years or more, the signal finally reached the Earth on January 31, 2000. The brightness of the exploding object was enormous, at least 1,000,000,000,000 times that of our Sun, or thousands of times that of the explosion of a single, heavy star (a "supernova"). The ESO Very Large Telescope (VLT) was also involved in trail-blazing observations of another gamma-ray burst in May 1999, cf. ESO PR 08/99. PR Photo 28a/00 : Sky field near GRB 000131 . PR Photo 28b/00 : The fading optical counterpart of GRB 000131 . PR Photo 28c/00 : VLT spectrum of GRB 000131 . What are Gamma-Ray Bursts? One of the currently most active fields of astrophysics is the study of the mysterious events known as "gamma-ray bursts" . They were first detected in the late 1960's by instruments on orbiting satellites. These short flashes of energetic gamma-rays last from less than a second to several minutes. Despite much effort, it is only within the last few years that it has become possible to locate the sites of some of these events (e.g. with the Beppo-Sax satellite ). Since the beginning of 1997, astronomers have identified about twenty optical sources in the sky that are associated with gamma-ray bursts. They have been found to be situated at extremely large (i.e., "cosmological") distances. This implies that the energy release during a gamma-ray burst within a few seconds is larger than that of the Sun during its entire life time (about 10,000 million years). "Gamma-ray bursts" are in fact by far the most powerful events since the Big Bang that are known in the Universe. While there are indications that gamma-ray bursts originate in star-forming regions within distant galaxies, the nature of such explosions remains a puzzle. Recent observations with large telescopes, e.g. the measurement of the degree of polarization of light from a gamma-ray burst in May 1999 with the VLT ( ESO PR 08/99), are now beginning to cast some light on this long-standing mystery. The afterglow of GRB 000131 ESO PR Photo 28a/00 ESO PR Photo 28a/00 [Preview - JPEG: 400 x 475 pix - 41k] [Normal - JPEG: 800 x 949 pix - 232k] [Full-Res - JPEG: 1200 x 1424 pix - 1.2Mb] ESO PR Photo 28b/00 ESO PR Photo 28b/00 [Preview - JPEG: 400 x 480 pix - 67k] [Normal - JPEG: 800 x 959 pix - 288k] [Full-Res - JPEG: 1200 x 1439 pix - 856k] Caption : PR Photo 28a/00 is a colour composite image of the sky field around the position of the gamma-ray burst GRB 000131 that was detected on January 31, 2000. It is based on images obtained with the ESO Very Large Telescope at Paranal. The object is indicated with an arrow, near a rather bright star (magnitude 9, i.e., over 1 million times brighter than the faintest objects visible on this photo). This and other bright objects in the field are responsible for various unavoidable imaging effects, caused by optical reflections (ring-shaped "ghost images", e.g. to the left of the brightest star) and detector saturation effects (horizontal and vertical straight lines and coloured "coronae" at the bright objects, and areas of "bleeding", e.g. below the bright star). PR Photo 28b/00 shows the rapid fading of the optical counterpart of GRB 000131 (slightly left of the centre), by means of exposures with the VLT on February 4 (upper left), 6 (upper right), 8 (lower left) and March 5 (lower right). It is no longer visible on the last photo. Technical information about these photos is available below. A gamma-ray burst was detected on January 31, 2000, by an international network of satellites ( Ulysses , NEAR and Konus ) via the InterPlanetary Network (IPN) [2]. It was designated GRB 000131 according to the date of the event. From geometric triangulation by means of the measured, exact arrival times of the signal at the individual satellites, it was possible to determine the direction from which the burst came. It was found to be from a point within a comparatively small sky area (about 50 arcmin 2 or 1/10 of the apparent size of the Moon), just inside the border of the southern constellation Carina (The Keel). Follow-up observations were undertaken by a group of European astronomers [1] with the ESO Very Large Telescope at the Paranal Observatory. A comparison of several exposures with the FORS1 multi-mode instrument at the 8.2-m VLT ANTU telescope during the nights of February 3-4 and 5-6 revealed a faint, point-like object that was fading rapidly - this was identified as the optical counterpart of the gamma-ray burst (the "afterglow"). On the second night, the R-magnitude (brightness) was found to be only 24.4, or 30 million times fainter than visible with the unaided eye in a dark sky. It was also possible to observe it with a camera at the 1.54-m Danish Telescope at the La Silla Observatory , albeit only in a near-infrared band and with a 1-hour exposure. Additional observations were made on February 8 with the SOFI multi-mode instrument at the ESO 3.58-m New Technology Telescope (NTT) at La Silla. The observations were performed partly by the astronomers from the group, partly in "service mode" by ESO staff at La Silla and Paranal. The observations showed that the light from the afterglow was very red, without blue and green light. This indicated a comparatively large distance and, assuming that the light from the explosion would originally have had the same colour (spectral distribution) as that of optical counterparts of other observed gamma-ray bursts, a photometric redshift of 4.35 to 4.70 was deduced [3]. A spectrum of GRB 000131 ESO PR Photo 28c/00 ESO PR Photo 28c/00 [Preview - JPEG: 400 x 332 pix - 22k] [Normal - JPEG: 800 x 663 pix - 62k] Caption : PR Photo 28c/00 shows the spectrum of the afterglow of GRB 000131 , obtained during a 3-hr exposure with the FORS1 multi-mode instrument at VLT ANTU on February 8, 2000. The "Lyman-alpha break" at wavelength 670.1 nm is indicated. Technical information about this photo is available below. An accurate measurement of the redshift - hence the distance - requires spectroscopic observations. A spectrum of GRB 000131 was therefore obtained on February 8, 2000, cf. PR Photo 28c/00 . At this time, the brightness had decreased further and the object had become so faint (R-magnitude 25.3) that a total of 3 hours of exposure time was necessary with VLT ANTU + FORS1 [4]. Still, this spectrum is quite "noisy". The deduced photometric redshift of GRB 000131 predicts that a "break" will be seen in the red region of the spectrum, at a wavelength somewhere between 650 and 700 nm. This break is caused by the strong absorption of light in intergalactic hydrogen clouds along the line of sight. The effect is known as the "Lyman-alpha forest" and is observed in all remote objects [5]. As PR Photo 28c/00 shows, such a break was indeed found at wavelength 670.1 nm. Virtually all light at shorter wavelengths from the optical counterpart of GRB 000131 is absorbed by intervening hydrogen clouds. From the rest wavelength of the Lyman-alpha break (121.6 nm), the redshift of GRB 000131 is then determined as 4.50, corresponding to a travel time of more than 90% of the age of the Universe . The most distant gamma-ray burst so far The measured redshift of 4.50 makes GRB 000131 the most distant gamma-ray burst known (the previous, spectroscopically confirmed record was 3.42). Assuming an age of the Universe of the order of 12 - 14,000 million years, the look-back time indicates that the explosion took place around the time our own galaxy, the Milky Way, was formed and at least 6,000 million years before the solar system was born. GRB 000131 and other gamma-ray bursts are believed to have taken place in remote galaxies. However, due to the huge distance, it has not yet been possible to see the galaxy in which the GRB 000131 event took place (the "host" galaxy). From the observed fading of the afterglow it is possible to estimate that the maximum brightness of this explosion was at least 10,000 times brighter than the host galaxy. Future studies of gamma-ray bursts The present team of astronomers has now embarked upon a detailed study of the surroundings of GRB 000131 with the VLT. A main goal is to observe the properties of the host galaxy. From the observations of about twenty optical counterparts of gamma-ray bursts identified until now, it is becoming increasingly clear that these very rare events are somehow related to the death of massive, short-lived stars . But despite the accumulating amount of excellent data, the details of the mechanism that leads to such dramatic explosions still remain a puzzle to astrophysicists. The detection and present follow-up observations of GRB 000131 highlight the new possibilities for studies of the extremely distant (and very early) Universe, now possible by means of gamma-ray bursts. When observed with the powerful instruments at a large ground-based telescope like the VLT, this incredibly bright class of cosmological objects may throw light on the fundamental processes of star formation in the infant universe. Of no less interest is the opportunity to analyse the chemical composition of the gas clouds at the epoch galaxies formed, by means of the imprints of the corresponding absorption lines on the afterglow spectrum. Waiting for the opportunity In this context, it would be extremely desirable to obtain very detailed (high-dispersion) spectra of the afterglow of a future gamma-ray burst, soon after the detection and while it is still sufficiently bright. It would for instance be possible to observe a gamma-ray burst like GRB 000131 with the UVES spectrograph at VLT KUEYEN at the moment of maximum brightness (that may have been about magnitude 16). An example of chemical studies of clouds at intermediate distance by means of a more nearby quasar is shown in ESO PR Photo 09h/00. Attempts are therefore now made to shorten considerably the various steps needed to perform such observations. This concerns especially the time needed to identify the counterpart of a gamma-ray burst and - to a lesser extent - the necessary reaction time at the VLT to point UVES towards the object (in theory, a matter of minutes only). The launch of the HETE-2 (High Energy Transient Explorer 2) gamma-ray burst satellite on October 9, 2000, is a major step in this direction. Under optimal conditions, a relative accurate sky position of a gamma-ray burst may henceforth reach the astronomy community within only 10-20 seconds of the first detection by this satellite. More information The research described in this press release is the subject of a scientific article by the team, entitled "VLT Identification of the optical afterglow of the gamma-ray burst GRB 000131 at z = 4.50" ; it will appear in a special VLT-issue (Letters to the Editor) of the European journal Astronomy & Astrophysics (December 1, 2000). The results are being presented today (October 18) at the joint CNR/ESO meeting on "Gamma-Ray Burst in the Afterglow Era" in Rome, Italy. Note also the related article in the ESO Messenger (No. 100, p. 32, June 2000). Notes [1]: The team consists of Michael Andersen (University of Oulu, Finland), Holger Pedersen, Jens Hjorth, Brian Lindgren Jensen, Lisbeth Fogh Olsen, Lise Christensen (University of Copenhagen, Denmark), Leslie Hunt (Centro per l'Astronomia Infrarossa e lo Studio del Mezzo, Florence, Italy), Javier Gorosabel (Danish Space Research Institute, Denmark), Johan Fynbo, Palle Møller (European Southern Observatory), Richard Marc Kippen (University of Alabama in Huntsville and NASA/Marshall Space Flight Center, USA), Bjarne Thomsen (University of Århus, Denmark), Marianne Vestergaard (Ohio State University, USA), Nicola Masetti, Eliana Palazzi (Instituto Tecnologie e Studio Radiazoni Extraterresti, Bologna, Italy) Kevin Hurley (University of California, Berkeley, USA), Thomas Cline (NASA Goddard Space Flight Center, Greenbelt, USA), Lex Kaper (Sterrenkundig Instituut ``Anton Pannekoek", the Netherlands) and Andreas O. Jaunsen (formerly University of Oslo, Norway; now ESO-Paranal). [2]: Detailed reports about the early observations of this gamma-ray burst are available at the dedicated webpage within the GRB Coordinates Network website. [3]: The photometric redshift method makes it possible to judge the distance to a remote celestial object (a galaxy, a quasar, a gamma-ray burst afterglow) from its measured colours. It is based on the proportionality between the distance and the velocity along the line of sight (Hubble's law) that reflects the expansion of the Universe. The larger the distance of an object is, the larger is its velocity and, due to the Doppler effect, the spectral shift of its emission towards longer (redder) wavelengths. Thus, the measured colour provides a rough indication of the distance. Examples of this method are shown in ESO PR 20/98 (Photos 48a/00 and 48e/00). [4]: In fact, the object was so faint that the positioning of the spectrograph slit had to be done in "blind" offset, i.e. without actually seeing the object on the slit during the observation. This very difficult observational feat was possible because of excellent preparations by the team of astronomers and the very good precision of the telescope and instrument. [5]: The " Lyman-alpha forest" refers to the crowding of absorption lines from intervening hydrogen clouds, shortward of the strong Lyman-alpha spectral line at rest wavelength 121.6 nm. Good examples in the VLT ANTU + FORS1 spectra of distant quasars are shown in ESO PR Photos 14a-c/99 and, at much higher dispersion, in a spectrum obtained with VLT KUEYEN + UVES, cf. ESO PR 08/00 (Photo 09f/00). Technical information about the photos PR Photo 28a/00 : The photo is based on three 8-min exposures obtained with VLT ANTU and the multi-mode FORS1 instrument. The optical filters were B (seeing 0.9 arcsec; here rendered as blue), V (0.8 arcsec; green) and R (0.7 arcsec; red). The field measures 6.8 x 6.8 arcmin 2. North is up and East is left. PR Photo 28b/00 : The four R-exposures were obtained with VLT ANTU + FORS1 on February 4 (magnitude R = 23.3), 6 (24.4), 8 (25.1) and March 5 (no longer visible). The field measures 48 x 48 arcsec 2. North is up and East is left. PR Photo 28c/00 : The spectrum was obtained during a 3-hr exposure with the FORS1 multi-mode instrument at VLT ANTU on February 8, 2000, when the object's magnitude was only R = 25.3. The mean levels of the spectral continua on either side of the redshifted "Lyman-alpha break" at wavelength 670.1 nm are indicated.

The U.S. Geological Survey's Earthquake Summary Posters: A GIS-based Education and Communication Product for Presenting Consolidated Post-Earthquake Information

NASA Astrophysics Data System (ADS)

Tarr, A.; Benz, H.; Earle, P.; Wald, D. J.

2003-12-01

Earthquake Summary Posters (ESP's), a new product of the U.S. Geological Survey's Earthquake Program, are produced at the National Earthquake Information Center (NEIC) in Golden. The posters consist of rapidly-generated, GIS-based maps made following significant earthquakes worldwide (typically M>7.0, or events of significant media/public interest). ESP's consolidate, in an attractive map format, a large-scale epicentral map, several auxiliary regional overviews (showing tectonic and geographical setting, seismic history, seismic hazard, and earthquake effects), depth sections (as appropriate), a table of regional earthquakes, and a summary of the reional seismic history and tectonics. The immediate availability of the latter text summaries has been facilitated by the availability of Rapid, Accurate Tectonic Summaries (RATS) produced at NEIC and posted on the web following significant events. The rapid production of ESP's has been facilitated by generating, during the past two years, regional templates for tectonic areas around the world by organizing the necessary spatially-referenced data for the map base and the thematic layers that overlay the base. These GIS databases enable scripted Arc Macro Language (AML) production of routine elements of the maps (for example background seismicity, tectonic features, and probabilistic hazard maps). However, other elements of the maps are earthquake-specific and are produced manually to reflect new data, earthquake effects, and special characteristics. By the end of this year, approximately 85% of the Earth's seismic zones will be covered for generating future ESP's. During the past year, 13 posters were completed, comparable to the yearly average expected for significant earthquakes. Each year, all ESPs will be published on a CD in PDF format as an Open-File Report. In addition, each is linked to the special event earthquake pages on the USGS Earthquake Program web site (http://earthquake.usgs.gov). Although three formats are generated, the poster-size format is the most popular for display, outreach, and use as a working map for project scientists (JPEG format for web; PDF for download, editing, and printing) whereas the other (smaller) formats are suitable for briefing packages. We will soon make both GIS and PDF files of individual elements of the posters available online. ESP's provide an unprecedented opportunity for college earth-science faculty to take advantage of current events for timely lessons in global tectonics. They are also invaluable to communicate with the media and with government officials. ESP's will be used as a vehicle to present other products now under development under the auspices of NEIC and the ANSS, including rapid finite-fault models, global predictive ShakeMaps, "Did You Feel It?", and Rapid Assessments of Global Earthquakes (RAGE, Earle and others, this meeting).

A Java-based tool for the design of classification microarrays.

PubMed

Meng, Da; Broschat, Shira L; Call, Douglas R

2008-08-04

Classification microarrays are used for purposes such as identifying strains of bacteria and determining genetic relationships to understand the epidemiology of an infectious disease. For these cases, mixed microarrays, which are composed of DNA from more than one organism, are more effective than conventional microarrays composed of DNA from a single organism. Selection of probes is a key factor in designing successful mixed microarrays because redundant sequences are inefficient and limited representation of diversity can restrict application of the microarray. We have developed a Java-based software tool, called PLASMID, for use in selecting the minimum set of probe sequences needed to classify different groups of plasmids or bacteria. The software program was successfully applied to several different sets of data. The utility of PLASMID was illustrated using existing mixed-plasmid microarray data as well as data from a virtual mixed-genome microarray constructed from different strains of Streptococcus. Moreover, use of data from expression microarray experiments demonstrated the generality of PLASMID. In this paper we describe a new software tool for selecting a set of probes for a classification microarray. While the tool was developed for the design of mixed microarrays-and mixed-plasmid microarrays in particular-it can also be used to design expression arrays. The user can choose from several clustering methods (including hierarchical, non-hierarchical, and a model-based genetic algorithm), several probe ranking methods, and several different display methods. A novel approach is used for probe redundancy reduction, and probe selection is accomplished via stepwise discriminant analysis. Data can be entered in different formats (including Excel and comma-delimited text), and dendrogram, heat map, and scatter plot images can be saved in several different formats (including jpeg and tiff). Weights generated using stepwise discriminant analysis can be stored for analysis of subsequent experimental data. Additionally, PLASMID can be used to construct virtual microarrays with genomes from public databases, which can then be used to identify an optimal set of probes.

Progress of Interoperability in Planetary Research for Geospatial Data Analysis

NASA Astrophysics Data System (ADS)

Hare, T. M.; Gaddis, L. R.

2015-12-01

For nearly a decade there has been a push in the planetary science community to support interoperable methods of accessing and working with geospatial data. Common geospatial data products for planetary research include image mosaics, digital elevation or terrain models, geologic maps, geographic location databases (i.e., craters, volcanoes) or any data that can be tied to the surface of a planetary body (including moons, comets or asteroids). Several U.S. and international cartographic research institutions have converged on mapping standards that embrace standardized image formats that retain geographic information (e.g., GeoTiff, GeoJpeg2000), digital geologic mapping conventions, planetary extensions for symbols that comply with U.S. Federal Geographic Data Committee cartographic and geospatial metadata standards, and notably on-line mapping services as defined by the Open Geospatial Consortium (OGC). The latter includes defined standards such as the OGC Web Mapping Services (simple image maps), Web Feature Services (feature streaming), Web Coverage Services (rich scientific data streaming), and Catalog Services for the Web (data searching and discoverability). While these standards were developed for application to Earth-based data, they have been modified to support the planetary domain. The motivation to support common, interoperable data format and delivery standards is not only to improve access for higher-level products but also to address the increasingly distributed nature of the rapidly growing volumes of data. The strength of using an OGC approach is that it provides consistent access to data that are distributed across many facilities. While data-steaming standards are well-supported by both the more sophisticated tools used in Geographic Information System (GIS) and remote sensing industries, they are also supported by many light-weight browsers which facilitates large and small focused science applications and public use. Here we provide an overview of the interoperability initiatives that are currently ongoing in the planetary research community, examples of their successful application, and challenges that remain.

MacMS: A Mass Spectrometer Simulator: Abstract of Issue 9906M

NASA Astrophysics Data System (ADS)

Bigger, Stephen W.; Craig, Robert A.

1999-10-01

MacMS is a program for Mac-OS compatible computers that simulates a magnetic sector mass spectrometer (1-4) designed to operate in the mass-to-charge (m/z) ratio range of 1-200 amu. MacMS has two operational modules. The first module (see Figure 1) is called the "Path" module and enables the user to quantitatively examine the trajectory of an ion of given m/z ratio in the electric and magnetic fields of the simulated "instrument". By systematically measuring a series of trajectories of different ions under different electric and magnetic field conditions, the user can determine how the resolution of the "instrument" is affected by these experimentally variable parameters. The user can thus choose suitable instrumental conditions for scanning a given m/z ratio range with good separation between the peaks. The second module (see Figure 2) is called as the "Spectrometer" module and enables the user to record, under any chosen instrumental conditions, the mass spectrum of (i) the instrumental background, (ii) neon, (iii) methane, or (iv) the parent ion of carbon tetrachloride. Both voltage scanning and magnetic scanning are possible (5). A hard copy of any mass spectrum that has been recorded can also be obtained. MacMS can read ASCII data files containing mass spectral information of compounds other than those that are "built-in" to the simulator. The appropriate format for creating such data files is described in the program documentation. There are a number of instructional exercises that can be conducted using the mass spectral information contained within the simulator. These are included in the program documentation. For example, the intensities of the 20Ne+, 21Ne+, and 22Ne+ species can be determined from hard copies of mass spectra of neon that are obtained under different instrumental sensitivities. The relative abundances of the three isotopes of neon can thus be calculated and compared with the literature values (6). The simulator also includes adjustable, fixed-value range and gain settings, which can be used to enhance the resolution and sensitivity of the instrument respectively.

1. Kiser, R. N. Introduction to Mass Spectrometry and its Applications; Prentice-Hall: Englewood Cliffs, N. J., 1965; pp 1-3; pp 32-65.
2. Johnstone, R. A. W.; Rose, M. E. Mass Spectrometry for Chemists and Biochemists, 2nd ed.; Cambridge University Press: Cambridge, 1996.
3. Hill, H. C.; Loudon, A. G. Introduction to Mass Spectrometry; 2nd ed.; Heyden: London, 1972; p 5.
4. Farmer, J. B. In Mass Spectrometry, McDowell, C. A., Ed.; McGraw-Hill: New York, 1963; pp 10-11.
5. Message, G. M. Practical Aspects of Gas Chromatography-Mass Spectrometry, Wiley: New York, 1984; Chapter 3.
6. CRC Handbook of Chemistry and Physics, 55th ed.; CRC: Cleveland, 1974.

Acquisition and Post-Processing of Immunohistochemical Images.

PubMed

Sedgewick, Jerry

2017-01-01

Augmentation of digital images is almost always a necessity in order to obtain a reproduction that matches the appearance of the original. However, that augmentation can mislead if it is done incorrectly and not within reasonable limits. When procedures are in place for insuring that originals are archived, and image manipulation steps reported, scientists not only follow good laboratory practices, but avoid ethical issues associated with post processing, and protect their labs from any future allegations of scientific misconduct. Also, when procedures are in place for correct acquisition of images, the extent of post processing is minimized or eliminated. These procedures include white balancing (for brightfield images), keeping tonal values within the dynamic range of the detector, frame averaging to eliminate noise (typically in fluorescence imaging), use of the highest bit depth when a choice is available, flatfield correction, and archiving of the image in a non-lossy format (not JPEG).When post-processing is necessary, the commonly used applications for correction include Photoshop, and ImageJ, but a free program (GIMP) can also be used. Corrections to images include scaling the bit depth to higher and lower ranges, removing color casts from brightfield images, setting brightness and contrast, reducing color noise, reducing "grainy" noise, conversion of pure colors to grayscale, conversion of grayscale to colors typically used in fluorescence imaging, correction of uneven illumination (flatfield correction), merging color images (fluorescence), and extending the depth of focus. These corrections are explained in step-by-step procedures in the chapter that follows.

Teleconferencing using multimedia messaging service (MMS) for long-range consultation of patients with neurosurgical problems in an acute situation.

PubMed

Waran, Vicknes; Selladurai, Benedict M; Bahuri, Nor Faizal Ahmad; George, George John K Thomas; Lim, Grace P S; Khine, Myo

2008-02-01

: We present our initial experience using a simple and relatively cost effective system using existing mobile phone network services and conventional handphones with built in cameras to capture carefully selected images from hard copies of scan images and transferring these images from a hospital without neurosurgical services to a university hospital with tertiary neurosurgical service for consultation and management plan. : A total of 14 patients with acute neurosurgical problems admitted to a general hospital in a 6 months period had their images photographed and transferred in JPEG format to a university neurosurgical unit. This was accompanied by a phone conference to discuss the scan and the patients' condition between the neurosurgeon and the referring physician. All images were also reviewed by a second independent neurosurgeon on a separate occasion to asses the agreement on the diagnosis and the management plan. : There were nine patients with acute head injury and five patients with acute nontraumatic neurosurgical problems. In all cases both neurosurgeons were in agreement that a diagnosis could be made on the basis of the images that were transferred. With respect to the management advice there were differences in opinion on three of the patients but these were considered to be minor. : Accurate diagnosis can be made on images of acute neurosurgical problems transferred using a conventional camera phone and meaningful decisions can be made on these images. This method of consultation also proved to be highly convenient and cost effective.

Simultaneous automatic scoring and co-registration of hormone receptors in tumor areas in whole slide images of breast cancer tissue slides.

PubMed

Trahearn, Nicholas; Tsang, Yee Wah; Cree, Ian A; Snead, David; Epstein, David; Rajpoot, Nasir

2017-06-01

Automation of downstream analysis may offer many potential benefits to routine histopathology. One area of interest for automation is in the scoring of multiple immunohistochemical markers to predict the patient's response to targeted therapies. Automated serial slide analysis of this kind requires robust registration to identify common tissue regions across sections. We present an automated method for co-localized scoring of Estrogen Receptor and Progesterone Receptor (ER/PR) in breast cancer core biopsies using whole slide images. Regions of tumor in a series of fifty consecutive breast core biopsies were identified by annotation on H&E whole slide images. Sequentially cut immunohistochemical stained sections were scored manually, before being digitally scanned and then exported into JPEG 2000 format. A two-stage registration process was performed to identify the annotated regions of interest in the immunohistochemistry sections, which were then scored using the Allred system. Overall correlation between manual and automated scoring for ER and PR was 0.944 and 0.883, respectively, with 90% of ER and 80% of PR scores within in one point or less of agreement. This proof of principle study indicates slide registration can be used as a basis for automation of the downstream analysis for clinically relevant biomarkers in the majority of cases. The approach is likely to be improved by implantation of safeguarding analysis steps post registration. © 2016 International Society for Advancement of Cytometry. © 2016 International Society for Advancement of Cytometry.

Series of Laminar Soot Processes Experiment

NASA Technical Reports Server (NTRS)

2003-01-01

Study of the downlink data from the Laminar Soot Processes (LSP) experiment quickly resulted in discovery of a new mechanism of flame extinction caused by radiation of soot. Scientists found that the flames emit soot sooner than expected. These findings have direct impact on spacecraft fire safety, as well as the theories predicting the formation of soot -- which is a major factor as a pollutant and in the spread of unwanted fires. This sequence was taken July 15, 1997, MET:14/10:34 (approximate) and shows the ignition and extinction of this flame. LSP investigated fundamental questions regarding soot, a solid byproduct of the combustion of hydrocarbon fuels. The experiment was performed using a laminar jet diffusion flame, which is created by simply flowing fuel -- like ethylene or propane -- through a nozzle and igniting it, much like a butane cigarette lighter. The LSP principal investigator was Gerard Faeth, University of Michigan, Arn Arbor. The experiment was part of the space research investigations conducted during the Microgravity Science Laboratory-1R mission (STS-94, July 1-17 1997). LSP results led to a reflight for extended investigations on the STS-107 research mission in January 2003. Advanced combustion experiments will be a part of investigations planned for the International Space Station. (189KB JPEG, 1350 x 1517 pixels; downlinked video, higher quality not available) The MPG from which this composite was made is available at http://mix.msfc.nasa.gov/ABSTRACTS/MSFC-0300183.html.

Can Commercial Digital Cameras Be Used as Multispectral Sensors? A Crop Monitoring Test

PubMed Central

Lebourgeois, Valentine; Bégué, Agnès; Labbé, Sylvain; Mallavan, Benjamin; Prévot, Laurent; Roux, Bruno

2008-01-01

The use of consumer digital cameras or webcams to characterize and monitor different features has become prevalent in various domains, especially in environmental applications. Despite some promising results, such digital camera systems generally suffer from signal aberrations due to the on-board image processing systems and thus offer limited quantitative data acquisition capability. The objective of this study was to test a series of radiometric corrections having the potential to reduce radiometric distortions linked to camera optics and environmental conditions, and to quantify the effects of these corrections on our ability to monitor crop variables. In 2007, we conducted a five-month experiment on sugarcane trial plots using original RGB and modified RGB (Red-Edge and NIR) cameras fitted onto a light aircraft. The camera settings were kept unchanged throughout the acquisition period and the images were recorded in JPEG and RAW formats. These images were corrected to eliminate the vignetting effect, and normalized between acquisition dates. Our results suggest that 1) the use of unprocessed image data did not improve the results of image analyses; 2) vignetting had a significant effect, especially for the modified camera, and 3) normalized vegetation indices calculated with vignetting-corrected images were sufficient to correct for scene illumination conditions. These results are discussed in the light of the experimental protocol and recommendations are made for the use of these versatile systems for quantitative remote sensing of terrestrial surfaces. PMID:27873930

Wavelet-based scalable L-infinity-oriented compression.

PubMed

Alecu, Alin; Munteanu, Adrian; Cornelis, Jan P H; Schelkens, Peter

2006-09-01

Among the different classes of coding techniques proposed in literature, predictive schemes have proven their outstanding performance in near-lossless compression. However, these schemes are incapable of providing embedded L(infinity)-oriented compression, or, at most, provide a very limited number of potential L(infinity) bit-stream truncation points. We propose a new multidimensional wavelet-based L(infinity)-constrained scalable coding framework that generates a fully embedded L(infinity)-oriented bit stream and that retains the coding performance and all the scalability options of state-of-the-art L2-oriented wavelet codecs. Moreover, our codec instantiation of the proposed framework clearly outperforms JPEG2000 in L(infinity) coding sense.

High Performance Compression of Science Data

NASA Technical Reports Server (NTRS)

Storer, James A.; Carpentieri, Bruno; Cohn, Martin

1994-01-01

Two papers make up the body of this report. One presents a single-pass adaptive vector quantization algorithm that learns a codebook of variable size and shape entries; the authors present experiments on a set of test images showing that with no training or prior knowledge of the data, for a given fidelity, the compression achieved typically equals or exceeds that of the JPEG standard. The second paper addresses motion compensation, one of the most effective techniques used in interframe data compression. A parallel block-matching algorithm for estimating interframe displacement of blocks with minimum error is presented. The algorithm is designed for a simple parallel architecture to process video in real time.

Fast computational scheme of image compression for 32-bit microprocessors

NASA Technical Reports Server (NTRS)

Kasperovich, Leonid

1994-01-01

This paper presents a new computational scheme of image compression based on the discrete cosine transform (DCT), underlying JPEG and MPEG International Standards. The algorithm for the 2-d DCT computation uses integer operations (register shifts and additions / subtractions only); its computational complexity is about 8 additions per image pixel. As a meaningful example of an on-board image compression application we consider the software implementation of the algorithm for the Mars Rover (Marsokhod, in Russian) imaging system being developed as a part of Mars-96 International Space Project. It's shown that fast software solution for 32-bit microprocessors may compete with the DCT-based image compression hardware.

Development and evaluation of vision rehabilitation devices.

PubMed

Luo, Gang; Peli, Eli

2011-01-01

We have developed a range of vision rehabilitation devices and techniques for people with impaired vision due to either central vision loss or severely restricted peripheral visual field. We have conducted evaluation studies with patients to test the utilities of these techniques in an effort to document their advantages as well as their limitations. Here we describe our work on a visual field expander based on a head mounted display (HMD) for tunnel vision, a vision enhancement device for central vision loss, and a frequency domain JPEG/MPEG based image enhancement technique. All the evaluation studies included visual search paradigms that are suitable for conducting indoor controllable experiments.

First Light with a 67-Million-Pixel WFI Camera

NASA Astrophysics Data System (ADS)

1999-01-01

The newest astronomical instrument at the La Silla observatory is a super-camera with no less than sixty-seven million image elements. It represents the outcome of a joint project between the European Southern Observatory (ESO) , the Max-Planck-Institut für Astronomie (MPI-A) in Heidelberg (Germany) and the Osservatorio Astronomico di Capodimonte (OAC) near Naples (Italy), and was installed at the 2.2-m MPG/ESO telescope in December 1998. Following careful adjustment and testing, it has now produced the first spectacular test images. With a field size larger than the Full Moon, the new digital Wide Field Imager is able to obtain detailed views of extended celestial objects to very faint magnitudes. It is the first of a new generation of survey facilities at ESO with which a variety of large-scale searches will soon be made over extended regions of the southern sky. These programmes will lead to the discovery of particularly interesting and unusual (rare) celestial objects that may then be studied with large telescopes like the VLT at Paranal. This will in turn allow astronomers to penetrate deeper and deeper into the many secrets of the Universe. More light + larger fields = more information! The larger a telescope is, the more light - and hence information about the Universe and its constituents - it can collect. This simple truth represents the main reason for building ESO's Very Large Telescope (VLT) at the Paranal Observatory. However, the information-gathering power of astronomical equipment can also be increased by using a larger detector with more image elements (pixels) , thus permitting the simultaneous recording of images of larger sky fields (or more details in the same field). It is for similar reasons that many professional photographers prefer larger-format cameras and/or wide-angle lenses to the more conventional ones. The Wide Field Imager at the 2.2-m telescope Because of technological limitations, the sizes of detectors most commonly in use in optical astronomical instruments - the "Charge-Coupled Devices (CCD's)" - are currently restricted to about 4000 x 4000 pixels. For the time being, the only possible way towards even larger detector areas is by assembling mosaics of CCD's. ESO , MPI-A and OAC have therefore undertaken a joint project to build a new and large astronomical camera with a mosaic of CCD's. This new Wide Field Imager (WFI) comprises eight CCD's with high sensitivity from the ultraviolet to the infrared spectral domain, each with 2046 x 4098 pixels. Mounted behind an advanced optical system at the Cassegrain focus of the 2.2-m telescope of the Max-Planck-Gesellschaft (MPG) at ESO's La Silla Observatory in Chile, the combined 8184 x 8196 = 67,076,064 pixels cover a square field-of-view with an edge of more than half a degree (over 30 arcmin) [1]. Compared to the viewing field of the human eye, this may still appear small, but in the domain of astronomical instrumentation, it is indeed a large step forward. For comparison, the largest field-of-view with the FORS1 instrument at the VLT is about 7 arcmin. Moreover, the level of detail detectable with the WFI (theoretical image sharpness) exceeds what is possible with the naked eye by a factor of about 10,000. The WFI project was completed in only two years in response to a recommendation to ESO by the "La Silla 2000" Working Group and the Scientific-Technical Committee (STC) to offer this type of instrument to the community. The MPI-A proposed to build such an instrument for the MPG/ESO 2.2-m telescope and a joint project was soon established. A team of astronomers from the three institutions is responsible for the initial work with the WFI at La Silla. A few other Cameras of this size are available, e.g. at Hawaii, Kitt Peak (USA) and Cerro Tololo (Chile), but this is the first time that a telescope this large has been fully dedicated to wide-field imaging with an 8kx8k CCD. The first WFI images Various exposures were obtained during the early tests with the WFI in order to arrive at the optimum adjustment of the camera at the telescope. We show here two of these that illustrate the great potential of this new facility. Spiral Galaxy NGC 253 ESO PR Photo 02a/99 ESO PR Photo 02a/99 [Preview - JPEG: 800x850 pix - 205k] [High-Res - JPEG: 4000 x 4252 pix - 3.0Mb] ESO PR Photo 02b/99 ESO PR Photo 02b/99 [Preview - JPEG: 800x870 pix - 353k] [High-Res - JPEG: 2200 x 2393 pix - 2.0Mb] Caption to PR Photos 02a/99 and 02b/99 : These photos show a sky field around the Spiral Galaxy NGC 253 (Type Sc) seen nearly edge-on. It is located in the southern constellation Sculptor at a distance of about 8 million light-years. The image is the sum of five 5-min exposures through a blue (B-band) optical filtre. They were slightly offset with respect to each other so that the small gaps between the eight CCD's of the mosaic are no longer visible. This image also shows the faint trails of 2 artificial satellites. In PR Photo 02a/99 , the full WFI field-of-view is reproduced, while the sub-field in PR Photo 02b/99 contains some fainter and smaller background galaxies. Many of the quite numerous and small, slightly fuzzy objects are undoubtedly globular clusters of NGC 253. Technical information: The image processing consisted of de-biassing, flat-fielding, and removal (by interpolation) of some bad columns. The full-width-half-maximum (FWHM) of stellar images is about 1.0 arcsec. PR Photo 02a/99 was rebinned (2x2) to 4kx4k size and sampling 0.48 arcsec/pixel. PR Photo 02b/99 is a subimage of the former, but at the full original sampling of 0.24 arcsec/pixel. It covers about 2kx2k, or about 1/16 of the full field. North is up and East is left. The observations were made on December 17, 1998. The Waning Moon ESO PR Photo 02c/99 ESO PR Photo 02c/99 [Preview - JPEG: 800 x 1245 pix - 242k] [High-Res - JPEG: 3000 x 4667 pix - 2.3Mb] ESO PR Photo 02d/99 ESO PR Photo 02d/99 [Preview - JPEG: 800 x 1003 pix - 394k] [High-Res - JPEG: 3000 x 3760 pix - 2.1Mb] ESO PR Photo 02e/99 ESO PR Photo 02e/99 [Preview - JPEG: 800 x 706 pix - 274k] [High-Res - JPEG: 3000 x 2648 pix - 1.5Mb] Caption to PR Photos 02c-e/99 : A series of short exposures through a near-infrared filtre was obtained of the waning Moon at sunrise on January 12 (at about 10 hrs UT), i.e. about 5 days before New Moon (24.3 days "old"). As can be seen in PR Photo 02c/99 , the edge of the full field-of-view is about the size of the diameter of the Moon. In addition, two impressive views were extracted from this frame and are here shown at full resolution; 1 pixel is about 470 metres on the surface of the Moon at a distance of just over 400,000 km. PR Photo 02d/99 displays the Mare Humorum area in the south-east quadrant with the crater Gassendi overlapping the northern rim. PR Photo 02d/99 is a view of the plains near the Moon's north-east rim, just eastwards of Sinus Iridum (the large crater in the shadows at the upper right), on the rim of which the crater Bianchini is located. The crater just below the centre is Mairan and the one about halfway between these two and of about the same size is Sharp . Technical information: Several 0.1 sec exposures were made through a near-infrared filtre (856 nm; FWHM 14 nm) with small offsets were recombined (to cover the gaps between the individual CCD's); otherwise, the image is raw. PR Photo 02c/99 was rebinned (2x2) to 4kx4k size and sampling 0.48 arcsec/pixel. The right-hand side of the picture was cropped in this reproduction to reduce the file size. PR Photos 02d/99 and 02e/99 are subimages of the former, but at the full original sampling of 0.24 arcsec/pixel; they covers about 1000x800 and 900x1050 pixels, or about 1/80 and 1/70 of the full field, respectively. North is up and East is left. The virtues of wide-angle imaging Wide-angle imaging is one of the most fundamental applications of observational astronomy. Only from (multi-band) observations over large areas of the sky can large-scale structures and rare objects be detected and put in a proper statistical perspective with other objects. Some typical examples of future survey work: very distant quasars and galaxies, clusters of galaxies, small bodies orbiting the Sun, brown dwarfs, low-surface brightness galaxies, peculiar stars, objects with emission-line spectra, gravitational lenses, etc. Other important applications include the search for supernovae in distant clusters of galaxies and the optical identification of the rapidly fading gamma-ray bursters which are detected by space observatories, but for which only very crude positional determinations are available. Once "promising objects" have been found and accurately located on the sky by the WFI, the enormous light collecting power of the VLT is then available to study them at much higher spectral and spatial detail and over a much wider range of wavelengths. In particular, the continuation of the ESO Imaging Survey (EIS) depends heavily on use of the WFI and will identify and classify all objects seen in a number of selected sky fields. The resulting database is made available as a special service to the community for dedicated follow-up work with the VLT. The advantage of modern digital detectors Traditionally, wide-field observations were made with Schmidt telescopes which, by means of to special optics, are able to image sharply a field with a diameter of 5-15 deg. These telescopes use photographic plates that, however, detect no more than about 3% of all incoming photons. In comparison, the photon detecting efficiency of the CCD's in the WFI exceeds 90%. Moreover, these CCD's supply digital data ready for computer analysis, whereas photographic plates must be digitized with a sophisticated scanning engine in a laborious and expensive manner which nevertheless cannot fully extract all the information. The price to be paid, until even larger CCD's become available, is the smaller field. The field, however, will not exceed 1-2 square degrees with the currently planned, new wide-field telescopes. The FIERA CCD controller The entire detector array of the WFI can be read out in only 27 seconds. Since one WFI image contains 0.14 Gbytes of data, this corresponds to the reading of a book at a rate of almost 1000 pages per second! Even for the most powerful PC's presently available, this can be a real challenge. However, much more remarkable is that FIERA , the high-tech CCD controller developed by ESO engineers, sustains this speed without adding noise or artifacts that exceed the extremely faint signal from the night-sky background on a moonless night at a completely dark site such as La Silla. In addition to the eight large CCD's of the mosaic, FIERA simultaneously commands a ninth CCD of the same type in which a small window centered on a bright star is read out continuously, up to 2 times every second. The fast-rate measurement of the instantaneous position of the star enables the telescope control system to track very accurately the apparent motion of the observed field in the sky so that the images remain perfectly sharp, even during long exposures. Future survey work at ESO In terms of bytes, it is expected that the WFI alone will acquire more observational data than all the rest of the La Silla Observatory and the UT1 of the VLT on Paranal together! This impressively illustrates the ever-accelerating pace at which astronomical facilities are developing. In the meantime, a Dutch/German/Italian consortium is preparing for the construction of the successor to WFI camera. The OmegaCam will have no less than 16,000 x 16,000 pixels and the field-of-view is four times as large, one square degree. It will be attached to the 2.6-m VLT Survey Telescope (VST) to be installed jointly by OAC and ESO on Paranal at the end of the year 2001. Note: [1]: Some technical details of the new camera: The WFI field-of-view measures 0.54 x 0.54 deg 2 (32.4 x 32.4 arcmin 2 ) and the image scale is 0.24 arcsec/pixel. An advanced optical system is indispensible to focus correctly a field of this large size - 0.8 degree diameter - on the flat CCD mosaic (12 x 12 cm 2 ). The WFI achromatic corrector consists of 6 lenses of up to 28 cm diameter and is able to concentrate 80% of the light of a point source into the area of one pixel in a flat focal plane. Up to 50 filters will be permanently mounted in the camera. A unique facility is provided by a set of 26 interference filters which cover the entire optical range from 380 - 930 nm and thus allows a rough analysis of the spectra of the typically 100,000 objects that are recorded in one field of view. The CCD's possess a very high sensitivity to ultraviolet light and the WFI is only the second UV-sensitive wide-field imager in service in the world. The camera mechanics was designed and built at the MPI-A which also provided the filters. How to obtain ESO Press Information ESO Press Information is made available on the World-Wide Web (URL: http://www.eso.org../ ). ESO Press Photos may be reproduced, if credit is given to the European Southern Observatory.

Irish Team Wins SEA & SPACE Super Prize

NASA Astrophysics Data System (ADS)

1998-09-01

A secondary school team from Ireland has won a trip to Europe's Spaceport in Kourou, French Guyana, and to ESO's Very Large Telescope (VLT) at Cerro Paranal, Chile. The trip is the Super-Prize for the Sea & Space Newspaper Competition , organised within the framework of the European Week for Scientific and Technological Culture. ESO PR Photo 33/98 ESO PR Photo 33/98 [Preview - JPEG: 800 x 434 pix - 568k] [High-Res - JPEG: 3000 x 1627 pix - 6.7Mb] The presentation of prize certificates to the winning Irish team (right) in Lisbon, on August 31, 1998, by ESO, ESA and EAAE representatives. Stephen Kearney, Cian Wilson (both aged 16 years), Eamonn McKeogh (aged 17 years) together with their teacher, John Daly of Blackrock College in Dublin, prepared their newspaper, Infinitus , on marine and space themes, and came first in the national round of the competition. Together with other students from all over Europe, they were invited to present their winning newspaper to a jury consisting of representatives of the organisers, during a special programme of events at the Gulbenkian Planetarium and EXPO '98 in Lisbon, from 28-31 August, 1998. The Irish team scored highly in all categories of the judging, which included scientific content and originality and creativity of the articles. Their look at Irish contributions to sea and space research also proved popular in a ballot by fellow student competitors. This vote was also taken into account by the judges. The jury was very impressed by the high quality of the national entries and there were several close runners-up. The width and depth was amazing and the variety of ideas and formats presented by the sixteen teams was enormous. A poster competition was organised for younger students, aged 10 to 13 and winning entries at national level are on display at the Oceanophilia Pavilion at EXPO '98. The SEA & SPACE project is a joint initiative of the European Space Agency (ESA) , the European Southern Observatory (ESO) , and the European Association for Astronomy Education (EAAE) , in cooperation with the German National Research Centre for Information Technology (GMD). It builds on these organisations' several years' successful participation in the European Week for Scientific and Technological Culture organised by the European Commission . Note: [1] This press release is published jointly by ESA, ESO and EAAE. More information about the background of SEA & SPACE is available in ESO PR 02/98 (January 22, 1998) and ESA Press Release N 03-98 (23 January 1998). SEA & SPACE webpages are available at these URL's: * http://www.esrin.esa.int/seaspace * http://www.eso.org/seaspace , and * http://www.algonet.se/~sirius/eaae/seaspace How to obtain ESO Press Information ESO Press Information is made available on the World-Wide Web (URL: http://www.eso.org ). ESO Press Photos may be reproduced, if credit is given to the European Southern Observatory.

Discovery of Nearest Known Brown Dwarf

NASA Astrophysics Data System (ADS)

2003-01-01

Bright Southern Star Epsilon Indi Has Cool, Substellar Companion [1] Summary A team of European astronomers [2] has discovered a Brown Dwarf object (a 'failed' star) less than 12 light-years from the Sun. It is the nearest yet known. Now designated Epsilon Indi B, it is a companion to a well-known bright star in the southern sky, Epsilon Indi (now "Epsilon Indi A"), previously thought to be single. The binary system is one of the twenty nearest stellar systems to the Sun. The brown dwarf was discovered from the comparatively rapid motion across the sky which it shares with its brighter companion : the pair move a full lunar diameter in less than 400 years. It was first identified using digitised archival photographic plates from the SuperCOSMOS Sky Surveys (SSS) and confirmed using data from the Two Micron All Sky Survey (2MASS). Follow-up observations with the near-infrared sensitive SOFI instrument on the ESO 3.5-m New Technology Telescope (NTT) at the La Silla Observatory confirmed its nature and has allowed measurements of its physical properties. Epsilon Indi B has a mass just 45 times that of Jupiter, the largest planet in the Solar System, and a surface temperature of only 1000 °C. It belongs to the so-called 'T dwarf' category of objects which straddle the domain between stars and giant planets. Epsilon Indi B is the nearest and brightest T dwarf known. Future studies of the new object promise to provide astronomers with important new clues as to the formation and evolution of these exotic celestial bodies, at the same time yielding interesting insights into the border zone between planets and stars. TINY MOVING NEEDLES IN GIANT HAYSTACKS ESO PR Photo 03a/03 ESO PR Photo 03a/03 [Preview - JPEG: 400 x 605 pix - 92k [Normal - JPEG: 1200 x 1815 pix - 1.0M] Caption: PR Photo 03a/03 shows Epsilon Indi A (the bright star at far right) and its newly discovered brown dwarf companion Epsilon Indi B (circled). The upper image comes from one of the SuperCOSMOS Sky Surveys (SSS) optical photographic plates (I-band, centred at wavelength 0.7 µm) on which this very high proper motion object was discovered. The lower image is the 'Quicklook atlas' infrared image (Ks-band, 2.1 µm) from the Two Micron All Sky Survey (2MASS). Epsilon Indi B is much brighter in the near-infrared than at optical wavelengths, indicating that it is a very cool object. Both images cover roughly 7 x 5 arcmin. Imagine you are a professional ornithologist, recently returned home from an expedition to the jungles of South America, where you spent long weeks using your high-powered telephoto lenses searching for rare species of birds. Relaxing, you take a couple of wide-angle snapshots of the blooming flowers in your back garden, undistracted by the common blackbird flying across your viewfinder. Only later, when carefully comparing those snaps, you notice something tiny and unusually coloured, flittering close behind the blackbird: you've discovered an exotic, rare bird, right there at home. In much the same way, a team of astronomers [2] has just found one of the closest neighbours to the Sun, an exotic 'failed star' known as a 'brown dwarf', moving rapidly across the sky in the southern constellation Indus (The Indian). Interestingly, at a time when telescopes are growing larger and are equipped with ever more sophisticated electronic detectors, there is still much to be learned by combining old photographic plates with this modern technology. Photographic plates taken by wide-field ("Schmidt") telescopes over the past decades have been given a new lease on life through being digitised by automated measuring machines, allowing computers to trawl effectively through huge and invaluable data archives that are by far not yet fully exploited [3]. For the Southern Sky, the Institute for Astronomy in Edinburgh (Scotland, UK) has recently released scans made by the SuperCOSMOS machine of plates spanning several decades in three optical passbands. These data are perfectly suited to the search for objects with large proper motions and extreme colours, such as brown dwarfs in the Solar vicinity. Everything is moving - a question of perspective In astronomy, the `proper motion' of a star signifies its apparent motion on the celestial sphere; it is usually expressed in arcseconds per year [4]. The corresponding, real velocity of a star (in kilometres per second) can only be estimated if the distance is known. A star with a large proper motion may indicate a real large velocity or simply that the star is close to us. By analogy, an airplane just after takeoff has a much lower true speed than when it's cruising at high altitude, but to an observer watching near an airport, the departing airplane seems to be moving much more quickly across the sky. Proxima Centauri, our nearest stellar neighbour, is just 4.2 light-years away (cf. ESO PR 22/02) and has a proper motion of 3.8 arcsec/year (corresponding to 23 km/sec relative to the Sun, in the direction perpendicular to the line-of-sight). The highest known proper motion star is Barnard's Star at 6 light-years distance and moving 10 arcsec/year (87 km/sec relative to the Sun). All known stars within 30 light-years are high-proper-motion objects and move at least 0.2 arcsec/year. Trawling for fast moving objects For some time, astronomers at the Astrophysical Institute in Potsdam have been making a systematic computerised search for high-proper-motion objects which appear on red photographic sky plates, but not on the equivalent blue plates. Their goal is to identify hitherto unknown cool objects in the Solar neighbourhood. They had previously found a handful of new objects within 30 light-years in this way, but nothing as red or moving remotely as fast as the one they have now snared in the constellation of Indus in the southern sky. This object was only seen on the very longest-wavelength plates in the SuperCOSMOS Sky Survey database. It was moving so quickly that on plates taken just two years apart in the 1990s, it had moved almost 10 arcseconds on the sky, giving a proper motion of 4.7 arcsec/year. It was also very faint at optical wavelengths, the reason why it had never been spotted before. However, when confirmed in data from the digital Two Micron All Sky Survey (2MASS), it was seen to be much brighter in the infrared, with the typical colour signature of a cool brown dwarf. At this point, the object was thought to be an isolated traveller. However, a search through available online catalogues quickly revealed that just 7 arcminutes away was a well-known star, Epsilon Indi. The two share exactly the same very large proper motion, and thus it was immediately clear the two must be related, forming a wide binary system separated by more than 1500 times the distance between the Sun and the Earth. Epsilon Indi is one of the 20 nearest stars to the Sun at just 11.8 light years [5]. It is a dwarf star (of spectral type K5) and with a surface temperature of about 4000 °C, somewhat cooler than the Sun. As such, it often appears in science fiction as the home of a habitable planetary system [6]. That all remains firmly in the realm of speculation, but nevertheless, we now know that it most certainly has a very interesting companion. This is a remarkable discovery: Epsilon Indi B is the nearest star-like source to the Sun found in 15 years, the highest proper motion source found in over 70 years, and with a total luminosity just 0.002% that of the Sun, one of the intrinsically faintest sources ever seen outside the Solar System! After Proxima and Alpha Centauri, the Epsilon Indi system is also just the second known wide binary system within 15 light years. However, unlike Proxima Centauri, Epsilon Indi B is no ordinary star. BROWN DWARFS: COOLING, COOLING, COOLING... ESO PR Photo 03b/03 ESO PR Photo 03b/03 [Preview - JPEG: 480 x 400 pix - 41k [Normal - JPEG: 960 x 800 pix - 120k] [Full-Res - JPEG: 2200 x 1834 pix - 304k] Caption: PR Photo 03b/03 shows the near-infrared (0.9-2.5 µm) spectrum of Epsilon Indi B, obtained on November 16-17, 2002, with the SOFI multi-mode instrument on the ESO 3.5-m New Technology Telescope (NTT) at the La Silla Observatory (Chile) The total integration time is 360 sec. Regions of strong absorption in the Earth's atmosphere have been removed for clarity. The locations of prominent molecular absorption bands from water (H2O), methane (CH4) and carbon monoxide (CO) in the atmosphere of Epsilon Indi B are indicated. Also labelled are some spectral lines from potassium (KI, at 1.25 and 1.52 µm) and sodium (NaI, at 2.33 µm) atoms. From these data, the spectral type of Epsilon Indi B is determined as T2.5V, corresponding to an effective temperature of 'just' 1000 ± 60 °C. Within days of its discovery in the database, the astronomers managed to secure an infrared spectrum of Epsilon Indi B using the SOFI instrument on the ESO 3.5-m New Technology Telescope (NTT) at the La Silla Observatory (Chile). The spectrum showed the broad absorption features due to methane and water steam in its upper atmosphere, indicating a temperature of 'only' 1000 °C. Ordinary stars are never this cool - Epsilon Indi B was confirmed as a brown dwarf. Brown dwarfs are thought to form in much the same way as stars, by the gravitational collapse of clumps of cold gas and dust in dense molecular clouds. However, for reasons not yet entirely clear, some clumps end up with masses less than about 7.5% of that of our Sun, or 75 times the mass of planet Jupiter. Below that boundary, there is not enough pressure in the core to initiate nuclear hydrogen fusion, the long-lasting and stable source of power for ordinary stars like the Sun. Except for a brief early phase where some deuterium is burned, these low-mass objects simply continue to cool and fade slowly away while releasing the heat left-over from their birth. Theoretical discussions of such objects began some 40 years ago. They were first named 'black dwarfs' and later 'brown dwarfs', in recognition of their predicted very cool temperatures. However, they were also predicted to be very faint and very red, and it was only in 1995 that such objects began to be detected. The first were seen as faint companions to nearby stars, and then later, some were found floating freely in the Solar neighbourhood. Most brown dwarfs belong to the recently classified spectral types L and T, below the long-known cool dwarfs of type M. These are very red to human eyes, but L and T dwarfs are cooler still, so much so that they are almost invisible at optical wavelengths, with most of their emission coming out in the infrared. [7]. How massive is Epsilon Indi B? The age of most brown dwarfs detected to date is unknown and thus it is hard to estimate their masses. However, it may be assumed that the age of Epsilon Indi B is the same as that of Epsilon Indi A, whose age is estimated to be 1.3 billion years based on its rotational speed. Combining this information with the measured temperature, brightness, and distance, it is then possible to determine the mass of Epsilon Indi B using theoretical models of brown dwarfs. Two independent sets of models yield the same result: Epsilon Indi B must have a mass somewhere between 4-6% of that of the Sun, or 40-60 Jupiter masses. The most likely value is around 45 Jupiter masses, i.e. well below the hydrogen fusion limit, and definitively confirming this new discovery as a bona-fide brown dwarf. THE IMPORTANCE OF EPSILON INDI B ESO PR Photo 03c/03 ESO PR Photo 03c/03 [Preview - JPEG: 469 x 400 pix - 77k [Normal - JPEG: 937 x 800 pix - 328k] [Full-Res - JPEG: 2718 x 2321 pix - 3.1M] [Java Applet] Caption: PR Photo 03c/03 displays a 3D map of all known stellar systems in the solar neighbourhood within a radius of 12.5 light-years. The Sun is at the centre and the Epsilon Indi binary system with the newly found brown dwarf Epsilon Indi B lies near the bottom. The colour is indicative of the temperature and the spectral class - white stars are (main-sequence) A and F dwarfs; yellow stars like the Sun are G dwarfs; orange stars are K dwarfs; and red stars are M dwarfs, by far the most common type of star in the solar neighbourhood. The blue axes are oriented along the galactic coordinate system, and the radii of the rings are 5, 10, and 15 light-years, respectively. The Java Applet conveniently provides detailed information about the stars in the figure - just move the cursor over the field. The figure is adapted from a diagram by Richard Powell. PR Photo 03c/03 shows the current census of the stars in the solar neighbourhood. All these stars have been known for many years, including GJ1061, which, however, only had its distance firmly established in 1997. The discovery of Epsilon Indi B, however, is an extreme case, never before catalogued, and the first brown dwarf to be found within the 12.5 light year horizon. If current predictions are correct, there should be twice as many brown dwarfs as main sequence stars. Consequently, Epsilon Indi B may be the first of perhaps 100 brown dwarfs within this distance, still waiting to be discovered! Epsilon Indi B is an important catch well beyond the cataloguing the Solar neighbourhood. As the nearest and brightest known brown dwarf and with a very accurately measured distance, it can be subjected to a wide variety of detailed observational studies. It may thus serve as a template for more distant members of its class. With the help of Epsilon Indi B, astronomers should now be able to see further into the mysteries surrounding the formation and evolution of the exotic objects known as brown dwarfs, halfway between stars and giant planets, the physics of their inner cores, and the weather and chemistry of their atmospheres. AN HISTORICAL NOTE - THE SOUTHERN CONSTELLATION INDUS ESO PR Photo 03d/03 ESO PR Photo 03d/03 [Preview - JPEG: 478 x 400 pix - 91k [Normal - JPEG: 956 x 800 pix - 952k] [Full-Res - JPEG: 2260 x 1892 pix - 3.2M] Caption: PR Photo 03d/03 shows the southern constellation Indus (The Indian) and its surroundings, as drawn in the famous Uranographia published 1801 of German astronomer Johann Elert Bode. This reproduction was made from original printing plates held by the library of the Astrophysical Institute Potsdam (Germany). The binary stellar system Epsilon Indi is associated with one of the arrows in the Indian's hand. However, because of its proximity, only 12 light-years away, it is moving so fast across the sky that it is now located someway below the arrows. In only a few thousand years, it will have moved out of the Indus constellation and into the neighbouring constellation Tucana (The Toucan). The constellation Indus lies deep in the southern sky, nestled between three birds, Grus (The Crane), Tucana (The Toucan) and Pavo (The Peacock), cf. PR Photo 03d/03. First catalogued in 1595-1597 by the Dutch navigators Pieter Dirkszoon Keyser and Frederick de Houtman, this constellation was added to the southern sky by Johann Bayer in his book 'Uranometria' (1603) to honour the Native Americans that European explorers had encountered on their travels. In particular, it has been suggested that it is specifically the native peoples of Tierra del Fuego and Patagonia that are represented in Indus, just over two thousand kilometres south of La Silla where the first spectroscopic observations of Epsilon Indi B were made some 400 years later. In the later drawing by Bode shown here, Epsilon Indi, the fifth brightest star in Indus, is associated with one of the arrows in the Indian's hand. More information The information in this press release is based on a paper ("Epsilon Indi B: a new benchmark T dwarf" by Ralf-Dieter Scholz and co-authors), soon to be published in the European journal Astronomy & Astrophysics (Letters). It is available on the web in preprint form at http://babbage.sissa.it/abs/astro-ph/0212487.

Low bit rate coding of Earth science images

NASA Technical Reports Server (NTRS)

Kossentini, Faouzi; Chung, Wilson C.; Smith, Mark J. T.

1993-01-01

In this paper, the authors discuss compression based on some new ideas in vector quantization and their incorporation in a sub-band coding framework. Several variations are considered, which collectively address many of the individual compression needs within the earth science community. The approach taken in this work is based on some recent advances in the area of variable rate residual vector quantization (RVQ). This new RVQ method is considered separately and in conjunction with sub-band image decomposition. Very good results are achieved in coding a variety of earth science images. The last section of the paper provides some comparisons that illustrate the improvement in performance attributable to this approach relative the the JPEG coding standard.

Two-dimensional compression of surface electromyographic signals using column-correlation sorting and image encoders.

PubMed

Costa, Marcus V C; Carvalho, Joao L A; Berger, Pedro A; Zaghetto, Alexandre; da Rocha, Adson F; Nascimento, Francisco A O

2009-01-01

We present a new preprocessing technique for two-dimensional compression of surface electromyographic (S-EMG) signals, based on correlation sorting. We show that the JPEG2000 coding system (originally designed for compression of still images) and the H.264/AVC encoder (video compression algorithm operating in intraframe mode) can be used for compression of S-EMG signals. We compare the performance of these two off-the-shelf image compression algorithms for S-EMG compression, with and without the proposed preprocessing step. Compression of both isotonic and isometric contraction S-EMG signals is evaluated. The proposed methods were compared with other S-EMG compression algorithms from the literature.

TerraLook: Providing easy, no-cost access to satellite images for busy people and the technologically disinclined

USGS Publications Warehouse

Geller, G.N.; Fosnight, E.A.; Chaudhuri, Sambhudas

2008-01-01

Access to satellite images has been largely limited to communities with specialized tools and expertise, even though images could also benefit other communities. This situation has resulted in underutilization of the data. TerraLook, which consists of collections of georeferenced JPEG images and an open source toolkit to use them, makes satellite images available to those lacking experience with remote sensing. Users can find, roam, and zoom images, create and display vector overlays, adjust and annotate images so they can be used as a communication vehicle, compare images taken at different times, and perform other activities useful for natural resource management, sustainable development, education, and other activities. ?? 2007 IEEE.

TerraLook: Providing easy, no-cost access to satellite images for busy people and the technologically disinclined

USGS Publications Warehouse

Geller, G.N.; Fosnight, E.A.; Chaudhuri, Sambhudas

2007-01-01

Access to satellite images has been largely limited to communities with specialized tools and expertise, even though images could also benefit other communities. This situation has resulted in underutilization of the data. TerraLook, which consists of collections of georeferenced JPEG images and an open source toolkit to use them, makes satellite images available to those lacking experience with remote sensing. Users can find, roam, and zoom images, create and display vector overlays, adjust and annotate images so they can be used as a communication vehicle, compare images taken at different times, and perform other activities useful for natural resource management, sustainable development, education, and other activities. ?? 2007 IEEE.

High performance compression of science data

NASA Technical Reports Server (NTRS)

Storer, James A.; Cohn, Martin

1994-01-01

Two papers make up the body of this report. One presents a single-pass adaptive vector quantization algorithm that learns a codebook of variable size and shape entries; the authors present experiments on a set of test images showing that with no training or prior knowledge of the data, for a given fidelity, the compression achieved typically equals or exceeds that of the JPEG standard. The second paper addresses motion compensation, one of the most effective techniques used in the interframe data compression. A parallel block-matching algorithm for estimating interframe displacement of blocks with minimum error is presented. The algorithm is designed for a simple parallel architecture to process video in real time.

Hyperspectral Imagery Throughput and Fusion Evaluation over Compression and Interpolation

DTIC Science & Technology

2008-07-01

MSE ⎛ ⎞ = ⎜ ⎟ ⎝ ⎠ (17) The PSNR values and compression ratios are shown in Table 1 and a plot of PSNR against the bits per pixel ( bpp ) is shown...Ratio bpp 59.3 2.9:1 2.76 46.0 9.2:1 0.87 43.2 14.5:1 0.55 40.8 25.0:1 0.32 38.7 34.6:1 0.23 35.5 62.1:1 0.13 Figure 11. PSNR vs. bits per...and a plot of PSNR against the bits per pixel ( bpp ) is shown in Figure 13. The 3D DCT compression yielded better results than the baseline JPEG

A new efficient method for color image compression based on visual attention mechanism

NASA Astrophysics Data System (ADS)

Shao, Xiaoguang; Gao, Kun; Lv, Lily; Ni, Guoqiang

2010-11-01

One of the key procedures in color image compression is to extract its region of interests (ROIs) and evaluate different compression ratios. A new non-uniform color image compression algorithm with high efficiency is proposed in this paper by using a biology-motivated selective attention model for the effective extraction of ROIs in natural images. When the ROIs have been extracted and labeled in the image, the subsequent work is to encode the ROIs and other regions with different compression ratios via popular JPEG algorithm. Furthermore, experiment results and quantitative and qualitative analysis in the paper show perfect performance when comparing with other traditional color image compression approaches.

Implementation of image transmission server system using embedded Linux

NASA Astrophysics Data System (ADS)

Park, Jong-Hyun; Jung, Yeon Sung; Nam, Boo Hee

2005-12-01

In this paper, we performed the implementation of image transmission server system using embedded system that is for the specified object and easy to install and move. Since the embedded system has lower capability than the PC, we have to reduce the quantity of calculation of the baseline JPEG image compression and transmission. We used the Redhat Linux 9.0 OS at the host PC and the target board based on embedded Linux. The image sequences are obtained from the camera attached to the FPGA (Field Programmable Gate Array) board with ALTERA cooperation chip. For effectiveness and avoiding some constraints from the vendor's own, we made the device driver using kernel module.

Helicopter electromagnetic data from Everglades National Park and surrounding areas, Florida: collected 9-14 December 1994

USGS Publications Warehouse

Fitterman, David V.; Deszcz-Pan, Maria

2002-01-01

This report describes helicopter electromagnetic (HEM) data that were collected over portion of Everglades National Park and surrounding areas in south Florida. The survey was flown 9-14 December 1994. The original data set processed by the contractor, Dighem, are provided as an ASCII, xyz flight-line file. Apparent resistivity grids of the generated from the original data set and JPEG images of these grids are also provided. The data have been corrected by the U.S. Geological Survey to remove the effects of calibration errors and bird-height uncertainty. The corrected data set is included in this report as flight-line data only.

Compression of CCD raw images for digital still cameras

NASA Astrophysics Data System (ADS)

Sriram, Parthasarathy; Sudharsanan, Subramania

2005-03-01

Lossless compression of raw CCD images captured using color filter arrays has several benefits. The benefits include improved storage capacity, reduced memory bandwidth, and lower power consumption for digital still camera processors. The paper discusses the benefits in detail and proposes the use of a computationally efficient block adaptive scheme for lossless compression. Experimental results are provided that indicate that the scheme performs well for CCD raw images attaining compression factors of more than two. The block adaptive method also compares favorably with JPEG-LS. A discussion is provided indicating how the proposed lossless coding scheme can be incorporated into digital still camera processors enabling lower memory bandwidth and storage requirements.

Rubble-Pile Minor Planet Sylvia and Her Twins

NASA Astrophysics Data System (ADS)

2005-08-01

VLT NACO Instrument Helps Discover First Triple Asteroid One of the thousands of minor planets orbiting the Sun has been found to have its own mini planetary system. Astronomer Franck Marchis (University of California, Berkeley, USA) and his colleagues at the Observatoire de Paris (France) [1] have discovered the first triple asteroid system - two small asteroids orbiting a larger one known since 1866 as 87 Sylvia [2]. "Since double asteroids seem to be common, people have been looking for multiple asteroid systems for a long time," said Marchis. "I couldn't believe we found one." The discovery was made with Yepun, one of ESO's 8.2-m telescopes of the Very Large Telescope Array at Cerro Paranal (Chile), using the outstanding image' sharpness provided by the adaptive optics NACO instrument. Via the observatory's proven "Service Observing Mode", Marchis and his colleagues were able to obtain sky images of many asteroids over a six-month period without actually having to travel to Chile. ESO PR Photo 25a/05 ESO PR Photo 25a/05 Orbits of Twin Moonlets around 87 Sylvia [Preview - JPEG: 400 x 516 pix - 145k] [Normal - JPEG: 800 x 1032 pix - 350k] ESO PR Photo 25b/05 ESO PR Photo 25b/05 Artist's impression of the triple asteroid system [Preview - JPEG: 420 x 400 pix - 98k] [Normal - JPEG: 849 x 800 pix - 238k] [Full Res - JPEG: 4000 x 3407 pix - 3.7M] [Full Res - TIFF: 4000 x 3000 pix - 36.0M] Caption: ESO PR Photo 25a/05 is a composite image showing the positions of Remus and Romulus around 87 Sylvia on 9 different nights as seen on NACO images. It clearly reveals the orbits of the two moonlets. The inset shows the potato shape of 87 Sylvia. The field of view is 2 arcsec. North is up and East is left. ESO PR Photo 25b/05 is an artist rendering of the triple system: Romulus, Sylvia, and Remus. ESO Video Clip 03/05 ESO Video Clip 03/05 Asteroid Sylvia and Her Twins [Quicktime Movie - 50 sec - 384 x 288 pix - 12.6M] Caption: ESO PR Video Clip 03/05 is an artist rendering of the triple asteroid system showing the large asteroid 87 Sylvia spinning at a rapid rate and surrounded by two smaller asteroids (Remus and Romulus) in orbit around it. This computer animation is also available in broadcast quality to the media (please contact Herbert Zodet). One of these asteroids was 87 Sylvia, which was known to be double since 2001, from observations made by Mike Brown and Jean-Luc Margot with the Keck telescope. The astronomers used NACO to observe Sylvia on 27 occasions, over a two-month period. On each of the images, the known small companion was seen, allowing Marchis and his colleagues to precisely compute its orbit. But on 12 of the images, the astronomers also found a closer and smaller companion. 87 Sylvia is thus not double but triple! Because 87 Sylvia was named after Rhea Sylvia, the mythical mother of the founders of Rome [3], Marchis proposed naming the twin moons after those founders: Romulus and Remus. The International Astronomical Union approved the names. Sylvia's moons are considerably smaller, orbiting in nearly circular orbits and in the same plane and direction. The closest and newly discovered moonlet, orbiting about 710 km from Sylvia, is Remus, a body only 7 km across and circling Sylvia every 33 hours. The second, Romulus, orbits at about 1360 km in 87.6 hours and measures about 18 km across. The asteroid 87 Sylvia is one of the largest known from the asteroid main belt, and is located about 3.5 times further away from the Sun than the Earth, between the orbits of Mars and Jupiter. The wealth of details provided by the NACO images show that 87 Sylvia is shaped like a lumpy potato, measuring 380 x 260 x 230 km (see ESO PR Photo 25a/05). It is spinning at a rapid rate, once every 5 hours and 11 minutes. The observations of the moonlets' orbits allow the astronomers to precisely calculate the mass and density of Sylvia. With a density only 20% higher than the density of water, it is likely composed of water ice and rubble from a primordial asteroid. "It could be up to 60 percent empty space," said co-discoverer Daniel Hestroffer (Observatoire de Paris, France). "It is most probably a "rubble-pile" asteroid", Marchis added. These asteroids are loose aggregations of rock, presumably the result of a collision. Two asteroids smacked into each other and got disrupted. The new rubble-pile asteroid formed later by accumulation of large fragments while the moonlets are probably debris left over from the collision that were captured by the newly formed asteroid and eventually settled into orbits around it. "Because of the way they form, we expect to see more multiple asteroid systems like this." Marchis and his colleagues will report their discovery in the August 11 issue of the journal Nature, simultaneously with an announcement that day at the Asteroid Comet Meteor conference in Armação dos Búzios, Rio de Janeiro state, Brazil.

A Glimpse of the Very Early Universal Web

NASA Astrophysics Data System (ADS)

2001-05-01

The VLT Maps Extremely Distant Galaxies Summary New, trailblazing observations with the ESO Very Large Telescope (VLT) at Paranal lend strong support to current computer models of the early universe: It is "spongy", with galaxies forming along filaments, like droplets along the strands of a spiders web. A group of astronomers at ESO and in Denmark [1] determined the distances to some very faint galaxies in the neighbourhood of a distant quasar. Plotting their positions in a three-dimensional map, they found that these objects are located within a narrow "filament", exactly as predicted by the present theories for the development of the first structures in the young universe . The objects are most likely "building blocks" from which galaxies and clusters of galaxies assemble. This observation shows a very useful way forward for the study of the early evolution of the universe and the emergence of structures soon after the Big Bang. At the same time, it provides yet another proof of the great power of the new class of giant optical telescopes for cosmological studies. PR Photo 19a/01 : Web-like structures in the young Universe (computer model). PR Photo 19b/01 : A group of objects at redshift 3.04 . PR Photo 19c/01 : Animated view of sky field and distant filament . PR Photo 19d/01 : The shape of the filament . PR Photo 19e/01 : Artist's impression of the very distant filament. PR Video Clip 04/01 : Video animation of the very distant filament. The computers are ahead of the telescopes For the past two decades cosmologists have been in the somewhat odd situation that their computers were "ahead" of their telescopes. The rapid evolution of powerful computer hardware and sophisticated software has provided theorists with the ability to build almost any sort of virtual universe they can imagine. Starting with different initial conditions just after the Big Bang, they can watch such fictional worlds evolve over billions of years in their supercomputers - and do so in a matter of days only. This has made it possible to predict what the universe might look like when it was still young. And working the opposite way, a comparison between the computer models and the real world might then provide some information about the initial conditions. Unfortunately, until recently astronomical telescopes were not sufficiently powerful to directly study the "real world" of the young universe by observing in detail the extremely faint objects at that early epoch, and thereby to test the predictions. Now, however, the advent of giant telescopes of the 8-10 metre class has changed this situation and a group of astronomers has used the ESO Very Large Telescope (VLT) at Paranal Observatory (Chile) to view a small part of the early cosmic structure. The telescopes have begun to catch up with the computer simulations. First Structures of the Universe ESO PR Photo 19a/01 ESO PR Photo 19a/01 [Preview - JPEG: 353 x 400 pix - 304k] [Normal - JPEG: 706 x 800 pix - 952k] Caption : Computer model of the universe at an age of about 2 billion years (i.e., at redshift 3, see the text). In the simulated universe gravity causes the primordial matter to arrange itself in thin filaments, much like a spider's web. The colour coding indicates the density of the gas, yellow for highest, red for medium, and blue for the lowest density. In the high density (yellow) regions the gas will undergo collapse and ignite bursts of star formation. Those small star-forming regions will slowly stream along the filaments. When they meet at the intersections (the "nodes"), they will merge and cause a gradual build-up of the galaxies we know today. In this sense they are the building blocks of which galaxies are made. This simulated image was computed by Tom Theuns at the Max-Planck-Institute for Astrophysics, Garching, Germany, and kindly made available for this Press Release (please be sure to quote the source). All recent computer-simulations of the early universe have one prediction in common: the first large-scale structures to form in the young universe are long filaments connected at their ends in "nodes" . The models typically look like a three-dimensional spider's web, and resemble the neural structure of a brain ( PR Photo 19a/01 ). The first galaxies or rather, the first galaxy building blocks , will form inside the threads of the web. When they start emitting light, they will be seen to mark out the otherwise invisible threads, much like beads on a string. In the course of millions and billions of years, those early galaxies will stream along these threads, towards and into the "nodes". This is where galaxy clusters will later be formed, cf. ESO PR 13/99. During this process the structure of the universe slowly changes. From being dominated by filaments, it becomes populated by large clusters of galaxies that are still connected by "bridges" and "walls", the last remains of the largest of the original filaments. The Lyman-alpha spectral line New observations with the ESO Very Large Telescope have now identified a string of galaxies that map out a tight filament in the early universe. This trailblazing result is reported by a team of astronomers from ESO and Denmark [1], who have been searching for compact clumps of hydrogen in the early universe. Hydrogen was formed during the Big Bang some 15 billion years ago and is by far the most common element in the universe. When stars are formed by contraction inside a large and compact clump of hydrogen in space, the surrounding hydrogen cloud will absorb the ultraviolet light from the newborn stars, and this cloud will soon start to glow. This glow is mostly emitted at a single wavelength at 121.6 nm (1216 Å), the "Lyman-alpha" emission line of hydrogen. This wavelength is in the ultraviolet part of the spectrum to which the terrestrial atmosphere is totally opaque. Accordingly, the Lyman-alpha emission can normally not be observed by ground-based telescopes. However, if a very distant hydrogen cloud emits Lyman-alpha radiation, then this spectral line will be red-shifted from the ultraviolet into the blue, green or red region of the spectrum [2]. For this reason, observations with large ground-based telescopes of Lyman-alpha radiation can be used to identify faint objects forming inside the high-redshift filaments. The team refers to such objects as the LEGO-blocks of cosmology ("Lyman-alpha Emitting Galaxy-building Objects") [3]. VLT confirms the predictions ESO PR Photo 19b/01 ESO PR Photo 19b/01 [Preview - JPEG: 400 x 276 pix - 95k] [Normal - JPEG: 800 x 551 pix - 216k] [Hi-Res - JPEG: 3000 x 2067 pix - 1.4Mb] ESO PR Photo 19c/01 ESO PR Photo 19c/01 [Animated GIF: 369 x 369 pix - 67k] Caption : PR Photo 19b/01 is a "true-colour" image of part of the sky field near the quasar Q 1205-30 . Red, blue and yellow objects are displayed with their true colours, while objects at a redshift of about 3 and with strong Lyman-alpha emission lines have a bright green colour (see the text). Six Lyman-alpha Emitting Galaxy-building Objects (LEGOs for short) are marked by hexagons. The quasar (at the lower left) is marked by a larger hexagon and is seen to have an extended Lyman-alpha cloud in front of it, here visible as extended green light. In PR Photo 19c/01 , the entire sky field is shown, as observed through the blue filter. The quasar is marked by a red hexagon while the LEGOs are indicated by yellow hexagons. A total of eight objects at redshift 3.04 are identified. One is located in front of the quasar and was found by means of its absorption of the quasar light, while the seven other objects were identified by their Lyman-alpha emission. As explained in the text, all these objects are found to lie inside a thin filament, here visualized in an animated GIF-display. Almost all of the other objects seen in this deep image are either stars in the outskirts of our own Milky Way galaxy or faint galaxies lying between us and the distant filament. Technical information about these photos is available below. Already in 1998, the present team of astronomers obtained very deep images with the ESO 3.58-m New Technology Telescope (NTT) at the La Silla Observatory (Chile) of the sky field around the quasar Q1205-30 . The redshift of this distant object has been measured as z = 3.04, corresponding to a look-back time of about 85% of the age of the Universe. Assuming this to be about 15 billion years, we now observe the quasar as it appeared 13 billion years ago, hence about 2 billion years after the Big Bang. The images were obtained through a special optical filter that only allows light in a narrow spectral waveband to pass. The astronomers chose this wavelength to coincide with that of the Lyman-alpha emission line redshifted to z = 3.04, i.e. 490 nm in the green spectral region. Lyman-alpha radiation from objects at the distance of the quasar - and thus, at nearly the same redshift - will pass through this optical filter. When these images are combined with other deep images taken through much wider red and blue filters, the Lyman-alpha emitting objects at redshift 3.04 will show up as small, intensely green objects, while most other objects in the field will appear in various shades of red, blue and yellow, cf. PR Photo 19b/01 . The spatial distribution of the galaxies ESO PR Photo 19d/01 ESO PR Photo 19d/01 [Preview - JPEG: 400 x 241 pix - 39k] [Normal - JPEG: 800 x 481 pix - 120k] ESO PR Photo 19e/01 ESO PR Photo 19e/01 [Preview - JPEG: 260 x 400 pix - 71k] [Normal - JPEG:5190 x 800 pix - 224k] [Hi-Res - JPEG: 1948 x 3000 pix - 1.5Mb] A Cosmic Filament at z=3.04 - PR Video Clip 04/01 [MPEG - 3.6Mb] ESO PR Video Clip 04/01 "A Cosmic Filament at z=3.04" (May 2001) (1000 frames/40 sec) [MPEG Video; 192x144 pix; 3.6Mb] [MPEG Video; 384x288 pix; 9.6Mb] [RealMedia; streaming; 56kps] [RealMedia; streaming; 200kps] Caption : PR Photo 19d/01 shows the three-dimensional distribution of the observed LEGOs (the hexagons); the three space co-ordinates being determined by the position in the sky and the distance (from the measured redshift, see the text). They are clearly located along a rather narrow filament, here indicated by a hollow cylinder seen from the front (left) and from the side (right). The surrounding box is drawn to facilitate the 3-D comprehension - it measures approximately 8.8 x 8.8 x 13.3 million light-years. PR Photo 19e/01 provides another view of the filament from a different angle, as well as an artist's impression (in colour). The eye represents the viewing angle of the telescope, see also PR Photo 19c/01 . PR Video Clip 04/01 provides an animated view of the spatial configuration of the filaments and the observed objects. Thanks to the great light-gathering capabilily of the VLT and the excellent FORS1 multi-mode instrument at the 8.2-m ANTU telescope, spectra of eight, faint Lyman-alpha objects were obtained in March 2000 that allowed measuring their exact redshifts and hence, their distances [2]. When two co-ordinates from the position in the sky were combined with the measured redshifts into a three-dimensional map, the astronomers found that all of the objects lie within a thin, well-defined filament , cf. PR Photos 19d/01 and 19e/01 . Speaking for the group, Palle Møller is exhilarated: " We have little doubt that for the first time, we are here seeing a small cosmic filament in the early universe. At this enormous distance and correspondingly long look-back time, we see it at a time when the universe was only about 2 billion years old. This is obviously in agreement with the predictions by the computer models of a web-like structure, lending further strong support to our current picture of the early development of the universe in which we live ". Implications of this discovery Does this observation change our view of the early universe? No - on the contrary, it confirms the predictions of computer-models about how cosmic structures formed in the early days after the Big Bang. The most important ingredient in the cosmological models is the dark matter that is believed to contribute about 95% of the mass of the universe. The present confirmation of the predictions of the models therefore also indirectly confirms that it is the dark matter that controls the formation of structures in the universe. However, there is still a long way to go before it will be possible to make a more detailed comparison between observations and predictions, e.g., from PR Photo 19e/01 to PR Photo 19a/01 ! Asked about what they consider the most important consequence of their observations, the team responds: " We have shown that we now have an observational method with which we may study the cosmic web in the early universe, and the VLT is a great tool for such studies. The way forward is now pretty clear - we just have to find those faint and distant LEGOs and then do the spectral observations from which we may determine how they are distributed in space ". More information The research described in this press release is the subject of a scientific article by the team, "Detection of a redshift 3.04 filament" , to appear as a Letter to the Editor in the European journal Astronomy & Astrophysics. Notes [1] The team consists of Palle Møller , Johan Fynbo (both at ESO, Garching) and Bjarne Thomsen (Institute of Physics and Astronomy, Aarhus, Denmark). [2] In astronomy, the redshift denotes the fraction by which the lines in the spectrum of an object are shifted towards longer wavelengths. The observed redshift of a distant hydrogen cloud or galaxy gives a direct estimate of the apparent recession velocity as caused by the universal expansion. Since the expansion rate increases with the distance, the velocity is itself a function (the Hubble relation) of the distance to the object. The higher the redshift of an object, the more distant it is and the longer is the look-back time, i.e. the earlier is the corresponding epoch. [3] See also ESO Press Release 13/99 and ESO Press Release 08/00 (Report F). Technical information about the photos PR Photo 19b/01 is a colour composite, based on three images. The green channel is based on images with a total exposure time of 17.8 hours, obtained through a 2 nm wide, optical filter, centred at wavelength 490.6 nm and obtained in 1998 with the SuSI2 instrument at the ESO 3.58-m New Technology Telescope (NTT) on La Silla. The blue and red channels are based on 13 400-sec exposures in a B-filter and 15 250-sec exposures in an I-filter, respectively, both obtained with 8.2-m VLT ANTU telescope and the multi-mode FORS1 instrument. The field measures 3.0 x 1.8 arcmin 2. North is up and East is left. PR Photo 19c/01 is based on 13 400-sec exposures in a B(lue) optical filter, obtained with VLT ANTU and the multi-mode FORS1 instrument in March 2000. The seeing was 0.7 - 1.0 arcsec and the field measures 6.8 x 6.8 arcmin 2. North is up and East is left.

Global Imagery Browse Services (GIBS) - Rapidly Serving NASA Imagery for Applications and Science Users

NASA Astrophysics Data System (ADS)

Schmaltz, J. E.; Ilavajhala, S.; Plesea, L.; Hall, J. R.; Boller, R. A.; Chang, G.; Sadaqathullah, S.; Kim, R.; Murphy, K. J.; Thompson, C. K.

2012-12-01

Expedited processing of imagery from NASA satellites for near-real time use by non-science applications users has a long history, especially since the beginning of the Terra and Aqua missions. Several years ago, the Land Atmosphere Near-real-time Capability for EOS (LANCE) was created to greatly expand the range of near-real time data products from a variety of Earth Observing System (EOS) instruments. NASA's Earth Observing System Data and Information System (EOSDIS) began exploring methods to distribute these data as imagery in an intuitive, geo-referenced format, which would be available within three hours of acquisition. Toward this end, EOSDIS has developed the Global Imagery Browse Services (GIBS, http://earthdata.nasa.gov/gibs) to provide highly responsive, scalable, and expandable imagery services. The baseline technology chosen for GIBS was a Tiled Web Mapping Service (TWMS) developed at the Jet Propulsion Laboratory. Using this, global images and mosaics are divided into tiles with fixed bounding boxes for a pyramid of fixed resolutions. Initially, the satellite imagery is created at the existing data systems for each sensor, ensuring the oversight of those most knowledgeable about the science. There, the satellite data is geolocated and converted to an image format such as JPEG, TIFF, or PNG. The GIBS ingest server retrieves imagery from the various data systems and converts them into image tiles, which are stored in a highly-optimized raster format named Meta Raster Format (MRF). The image tiles are then served to users via HTTP by means of an Apache module. Services are available for the entire globe (lat-long projection) and for both polar regions (polar stereographic projection). Requests to the services can be made with the non-standard, but widely known, TWMS format or via the well-known OGC Web Map Tile Service (WMTS) standard format. Standard OGC Web Map Service (WMS) access to the GIBS server is also available. In addition, users may request a KML pyramid. This variety of access methods allows stakeholders to develop visualization/browse clients for a diverse variety of specific audiences. Currently, EOSDIS is providing an OpenLayers web client, Worldview (http://earthdata.nasa.gov/worldview), as an interface to GIBS. A variety of other existing clients can also be developed using such tools as Google Earth, Google Earth browser Plugin, ESRI's Adobe Flash/Flex Client Library, NASA World Wind, Perceptive Pixel Client, Esri's iOS Client Library, and OpenLayers for Mobile. The imagery browse capabilities from GIBS can be combined with other EOSDIS services (i.e. ECHO OpenSearch) via a client that ties them both together to provide an interface that enables data download from the onscreen imagery. Future plans for GIBS include providing imagery based on science quality data from the entire data record of these EOS instruments.

High-resolution seismic-reflection and marine-magnetic data from offshore central California--San Gregorio to Point Sur

USGS Publications Warehouse

Sliter, Ray W.; Johnson, Samuel Y.; Watt, Janet T.; Scheirer, Daniel S.; Allwardt, Parker; Triezenberg, Peter J.

2013-01-01

The U.S. Geological Survey collected high-resolution seismic-reflection data on four surveys (S-N1-09-MB, S-15-10-NC, S-06-11-MB, and S-04-12-MB) and marine-magnetic data on one survey (S-06-11-MB) between 2009 and 2012, offshore of central California between San Gregorio and Point Sur. This work was supported in part by the California Seafloor Mapping Program. The survey areas span about 120 km of California's coast (including Monterey Bay). Most data were collected aboard the U.S. Geological Survey R/V Parke Snavely. Cumulatively, approximately 1,410 km of single-channel seismic-reflection data were acquired, mainly using a SIG 2mille minisparker. About 44 km of data were collected simultaneously using an EdgeTech Chirp 512. Subbottom acoustic penetration spanned tens to several hundreds of meters, variable by location. Marine magnetic data were collected on approximately 460 km of track lines (mainly in southern Monterey Bay) using a Geometrics G882 cesium-vapor marine magnetometer. This report includes maps and navigation files of the surveyed transects, linked to Google Earth™ software, as well as digital data files showing images of each transect in SEG-Y and JPEG formats. The images of bedrock, sediment deposits, and tectonic structure provide geologic information that is essential to hazard assessment, regional sediment management, and coastal and marine spatial planning at Federal, State and local levels, as well as to future research on the geomorphic, sedimentary, tectonic, and climatic record of central California.

NASA Tech Briefs, September 2008

NASA Technical Reports Server (NTRS)

2008-01-01

Topics covered include: Nanotip Carpets as Antireflection Surfaces; Nano-Engineered Catalysts for Direct Methanol Fuel Cells; Capillography of Mats of Nanofibers; Directed Growth of Carbon Nanotubes Across Gaps; High-Voltage, Asymmetric-Waveform Generator; Magic-T Junction Using Microstrip/Slotline Transitions; On-Wafer Measurement of a Silicon-Based CMOS VCO at 324 GHz; Group-III Nitride Field Emitters; HEMT Amplifiers and Equipment for their On-Wafer Testing; Thermal Spray Formation of Polymer Coatings; Improved Gas Filling and Sealing of an HC-PCF; Making More-Complex Molecules Using Superthermal Atom/Molecule Collisions; Nematic Cells for Digital Light Deflection; Improved Silica Aerogel Composite Materials; Microgravity, Mesh-Crawling Legged Robots; Advanced Active-Magnetic-Bearing Thrust- Measurement System; Thermally Actuated Hydraulic Pumps; A New, Highly Improved Two-Cycle Engine; Flexible Structural-Health-Monitoring Sheets; Alignment Pins for Assembling and Disassembling Structures; Purifying Nucleic Acids from Samples of Extremely Low Biomass; Adjustable-Viewing-Angle Endoscopic Tool for Skull Base and Brain Surgery; UV-Resistant Non-Spore-Forming Bacteria From Spacecraft-Assembly Facilities; Hard-X-Ray/Soft-Gamma-Ray Imaging Sensor Assembly for Astronomy; Simplified Modeling of Oxidation of Hydrocarbons; Near-Field Spectroscopy with Nanoparticles Deposited by AFM; Light Collimator and Monitor for a Spectroradiometer; Hyperspectral Fluorescence and Reflectance Imaging Instrument; Improving the Optical Quality Factor of the WGM Resonator; Ultra-Stable Beacon Source for Laboratory Testing of Optical Tracking; Transmissive Diffractive Optical Element Solar Concentrators; Delaying Trains of Short Light Pulses in WGM Resonators; Toward Better Modeling of Supercritical Turbulent Mixing; JPEG 2000 Encoding with Perceptual Distortion Control; Intelligent Integrated Health Management for a System of Systems; Delay Banking for Managing Air Traffic; and Spline-Based Smoothing of Airfoil Curvatures.

A joint source-channel distortion model for JPEG compressed images.

PubMed

Sabir, Muhammad F; Sheikh, Hamid Rahim; Heath, Robert W; Bovik, Alan C

2006-06-01

The need for efficient joint source-channel coding (JSCC) is growing as new multimedia services are introduced in commercial wireless communication systems. An important component of practical JSCC schemes is a distortion model that can predict the quality of compressed digital multimedia such as images and videos. The usual approach in the JSCC literature for quantifying the distortion due to quantization and channel errors is to estimate it for each image using the statistics of the image for a given signal-to-noise ratio (SNR). This is not an efficient approach in the design of real-time systems because of the computational complexity. A more useful and practical approach would be to design JSCC techniques that minimize average distortion for a large set of images based on some distortion model rather than carrying out per-image optimizations. However, models for estimating average distortion due to quantization and channel bit errors in a combined fashion for a large set of images are not available for practical image or video coding standards employing entropy coding and differential coding. This paper presents a statistical model for estimating the distortion introduced in progressive JPEG compressed images due to quantization and channel bit errors in a joint manner. Statistical modeling of important compression techniques such as Huffman coding, differential pulse-coding modulation, and run-length coding are included in the model. Examples show that the distortion in terms of peak signal-to-noise ratio (PSNR) can be predicted within a 2-dB maximum error over a variety of compression ratios and bit-error rates. To illustrate the utility of the proposed model, we present an unequal power allocation scheme as a simple application of our model. Results show that it gives a PSNR gain of around 6.5 dB at low SNRs, as compared to equal power allocation.

The effects of video compression on acceptability of images for monitoring life sciences experiments

NASA Astrophysics Data System (ADS)

Haines, Richard F.; Chuang, Sherry L.

1992-07-01

Future manned space operations for Space Station Freedom will call for a variety of carefully planned multimedia digital communications, including full-frame-rate color video, to support remote operations of scientific experiments. This paper presents the results of an investigation to determine if video compression is a viable solution to transmission bandwidth constraints. It reports on the impact of different levels of compression and associated calculational parameters on image acceptability to investigators in life-sciences research at ARC. Three nonhuman life-sciences disciplines (plant, rodent, and primate biology) were selected for this study. A total of 33 subjects viewed experimental scenes in their own scientific disciplines. Ten plant scientists viewed still images of wheat stalks at various stages of growth. Each image was compressed to four different compression levels using the Joint Photographic Expert Group (JPEG) standard algorithm, and the images were presented in random order. Twelve and eleven staffmembers viewed 30-sec videotaped segments showing small rodents and a small primate, respectively. Each segment was repeated at four different compression levels in random order using an inverse cosine transform (ICT) algorithm. Each viewer made a series of subjective image-quality ratings. There was a significant difference in image ratings according to the type of scene viewed within disciplines; thus, ratings were scene dependent. Image (still and motion) acceptability does, in fact, vary according to compression level. The JPEG still-image-compression levels, even with the large range of 5:1 to 120:1 in this study, yielded equally high levels of acceptability. In contrast, the ICT algorithm for motion compression yielded a sharp decline in acceptability below 768 kb/sec. Therefore, if video compression is to be used as a solution for overcoming transmission bandwidth constraints, the effective management of the ratio and compression parameters according to scientific discipline and experiment type is critical to the success of remote experiments.

Reproducibility of the NEPTUNE descriptor-based scoring system on whole-slide images and histologic and ultrastructural digital images.

PubMed

Barisoni, Laura; Troost, Jonathan P; Nast, Cynthia; Bagnasco, Serena; Avila-Casado, Carmen; Hodgin, Jeffrey; Palmer, Matthew; Rosenberg, Avi; Gasim, Adil; Liensziewski, Chrysta; Merlino, Lino; Chien, Hui-Ping; Chang, Anthony; Meehan, Shane M; Gaut, Joseph; Song, Peter; Holzman, Lawrence; Gibson, Debbie; Kretzler, Matthias; Gillespie, Brenda W; Hewitt, Stephen M

2016-07-01

The multicenter Nephrotic Syndrome Study Network (NEPTUNE) digital pathology scoring system employs a novel and comprehensive methodology to document pathologic features from whole-slide images, immunofluorescence and ultrastructural digital images. To estimate inter- and intra-reader concordance of this descriptor-based approach, data from 12 pathologists (eight NEPTUNE and four non-NEPTUNE) with experience from training to 30 years were collected. A descriptor reference manual was generated and a webinar-based protocol for consensus/cross-training implemented. Intra-reader concordance for 51 glomerular descriptors was evaluated on jpeg images by seven NEPTUNE pathologists scoring 131 glomeruli three times (Tests I, II, and III), each test following a consensus webinar review. Inter-reader concordance of glomerular descriptors was evaluated in 315 glomeruli by all pathologists; interstitial fibrosis and tubular atrophy (244 cases, whole-slide images) and four ultrastructural podocyte descriptors (178 cases, jpeg images) were evaluated once by six and five pathologists, respectively. Cohen's kappa for inter-reader concordance for 48/51 glomerular descriptors with sufficient observations was moderate (0.40

The effects of video compression on acceptability of images for monitoring life sciences experiments

NASA Technical Reports Server (NTRS)

Haines, Richard F.; Chuang, Sherry L.

1992-01-01

Future manned space operations for Space Station Freedom will call for a variety of carefully planned multimedia digital communications, including full-frame-rate color video, to support remote operations of scientific experiments. This paper presents the results of an investigation to determine if video compression is a viable solution to transmission bandwidth constraints. It reports on the impact of different levels of compression and associated calculational parameters on image acceptability to investigators in life-sciences research at ARC. Three nonhuman life-sciences disciplines (plant, rodent, and primate biology) were selected for this study. A total of 33 subjects viewed experimental scenes in their own scientific disciplines. Ten plant scientists viewed still images of wheat stalks at various stages of growth. Each image was compressed to four different compression levels using the Joint Photographic Expert Group (JPEG) standard algorithm, and the images were presented in random order. Twelve and eleven staffmembers viewed 30-sec videotaped segments showing small rodents and a small primate, respectively. Each segment was repeated at four different compression levels in random order using an inverse cosine transform (ICT) algorithm. Each viewer made a series of subjective image-quality ratings. There was a significant difference in image ratings according to the type of scene viewed within disciplines; thus, ratings were scene dependent. Image (still and motion) acceptability does, in fact, vary according to compression level. The JPEG still-image-compression levels, even with the large range of 5:1 to 120:1 in this study, yielded equally high levels of acceptability. In contrast, the ICT algorithm for motion compression yielded a sharp decline in acceptability below 768 kb/sec. Therefore, if video compression is to be used as a solution for overcoming transmission bandwidth constraints, the effective management of the ratio and compression parameters according to scientific discipline and experiment type is critical to the success of remote experiments.

Baseline coastal oblique aerial photographs collected from Calcasieu Lake, Louisiana, to Brownsville, Texas, September 9-10, 2008

USGS Publications Warehouse

Morgan, Karen L. M.; Karen A. Westphal,

2016-04-28

The U.S. Geological Survey (USGS), as part of the National Assessment of Coastal Change Hazards project, conducts baseline and storm-response photography missions to document and understand the changes in vulnerability of the Nation's coasts to extreme storms (Morgan, 2009). On September 9-10, 2008, the USGS conducted an oblique aerial photographic survey from Calcasieu Lake, Louisiana, to Brownsville, Texas, aboard a Cessna C-210 (aircraft) at an altitude of 500 feet (ft) and approximately 1,000 ft offshore. This mission was flown to collect baseline data for assessing incremental changes of the beach and nearshore area, and the data can be used in the assessment of future coastal change.The photographs provided in this report are Joint Photographic Experts Group (JPEG) images. ExifTool was used to add the following to the header of each photo: time of collection, Global Positioning System (GPS) latitude, GPS longitude, keywords, credit, artist (photographer), caption, copyright, and contact information. The photograph locations are an estimate of the position of the aircraft at the time the photograph was taken and do not indicate the location of any feature in the images (see the Navigation Data page). These photographs document the state of the barrier islands and other coastal features at the time of the survey. Pages containing thumbnail images of the photographs, referred to as contact sheets, were created in 5-minute segments of flight time. These segments can be found on the Photos and Maps page. Photographs can be opened directly with any JPEG-compatible image viewer by clicking on a thumbnail on the contact sheet.In addition to the photographs, a Google Earth Keyhole Markup Language (KML) file is provided and can be used to view the images by clicking on the marker and then clicking on either the thumbnail or the link above the thumbnail. The KML file was created using the photographic navigation files. The KML file can be found in the kml folder.

Post-Hurricane Sandy coastal oblique aerial photographs collected from Cape Lookout, North Carolina, to Montauk, New York, November 4-6, 2012

USGS Publications Warehouse

Morgan, Karen L.M.; Krohn, M. Dennis

2014-01-01

The U.S. Geological Survey (USGS) conducts baseline and storm response photography missions to document and understand the changes in vulnerability of the Nation's coasts to extreme storms. On November 4-6, 2012, approximately one week after the landfall of Hurricane Sandy, the USGS conducted an oblique aerial photographic survey from Cape Lookout, N.C., to Montauk, N.Y., aboard a Piper Navajo Chieftain (aircraft) at an altitude of 500 feet (ft) and approximately 1,000 ft offshore. This mission was flown to collect post-Hurricane Sandy data for assessing incremental changes in the beach and nearshore area since the last survey in 2009. The data can be used in the assessment of future coastal change. The photographs provided here are Joint Photographic Experts Group (JPEG) images. The photograph locations are an estimate of the position of the aircraft and do not indicate the location of the feature in the images. These photos document the configuration of the barrier islands and other coastal features at the time of the survey. Exiftool was used to add the following to the header of each photo: time of collection, Global Positioning System (GPS) latitude, GPS longitude, keywords, credit, artist (photographer), caption, copyright, and contact information. Photographs can be opened directly with any JPEG-compatible image viewer by clicking on a thumbnail on the contact sheet. Table 1 provides detailed information about the GPS location, image name, date, and time each of the 9,481 photographs were taken, along with links to each photograph. The photographs are organized in segments, also referred to as contact sheets, and represent approximately 5 minutes of flight time. In addition to the photographs, a Google Earth Keyhole Markup Language (KML) file is provided and can be used to view the images by clicking on the marker and then clicking on either the thumbnail or the link above the thumbnail. The KML files were created using the photographic navigation files.

47 CFR 1.913 - Application and notification forms; electronic and manual filing.

Code of Federal Regulations, 2011 CFR

2011-10-01

... notifications whenever possible. The files, other than the ASCII table of contents, should be in Adobe Acrobat... possible. The attachment should be uploaded via ULS in Adobe Acrobat Portable Document Format (PDF... the table of contents, should be in Adobe Acrobat Portable Document Format (PDF) whenever possible...

VLT Spectra "Resolve" a Stellar Disk at 25,000 Light-Years Distance

NASA Astrophysics Data System (ADS)

2001-04-01

Unique Observations of a Microlensing Event Summary Like our Sun, stars are large gaseous spheres. However, while we are able to perceive the Sun's disk, all other stars are so far away that they normally appear as points of light . Only specialized observing techniques, like interferometry [1], are able to "resolve" the images of nearby stars and to show them as extended balls of fire. But opportunities may sometimes arise that allow amazing observational feats in this field . Indeed, an international team of astronomers [2] has just "resolved" a single, normal star some 25,000 light years away , or about 1.6 billion times more distant than the Sun [3], by taking advantage of a multiple microlensing event . During such a rare event, the light from the remote star is amplified by the gravity of a faint object that passes in front of it, as seen from the Earth . In fact, this gravitational lens acts as a magnifying glass that focusses different parts of the star's image at different times. Using the FORS1 multi-mode instrument at the 8.2-m VLT ANTU telescope on Paranal during a microlensing event, the team was able to obtain detailed spectra of the different parts of the remote star. In doing so, they managed to probe its gaseous atmosphere at different depths. This is the first time that it has been possible to obtain detailed, spatially resolved spectra across the full face of a normal star other than the Sun [4]. PR Photo 16a/01 : The light-curve of Microlensing Event EROS-BLG-2000-5 . PR Photo 16b/01 : The sky area of EROS-BLG-2000-5. PR Photo 16c/01 : A VLT spectrum of EROS-BLG-2000-5. PR Photo 16d/01 : The observed change of the H-alpha line strength of EROS-BLG-2000-5. A many-faceted success story The following story is about a most unusual astronomical observation and also shows how modern astrophysics works . It combines the study of stellar atmospheres with the intricate optical effects produced by the gravitational field of a binary star in the Milky Way. The successful outcome was dependent on diligent observers in various regions of the world and ultimately on the critical timing of spectral observations with the ESO Very Large Telescope (VLT) at the Paranal Observatory in Chile. Thanks to the effective collaboration among the scientists and a certain measure of good luck, unique data were obtained that are now providing fundamental new insights into stellar astrophysics. The face of a star Distant stars appear as small points of light, even to the largest telescopes on Earth. They are simply too far away to be "resolved" by normal telescopes, and no information can therefore be obtained about what the stellar surfaces look like. This is a fundamental obstacle to the detailed study of stars other than the Sun. We know, however, that the disk of a star does not present itself as a uniform surface. As is the case of the Sun that exhibits variable structures like sunspots (in particular at the time of the present solar maximum), other stars may also have "star-spots" . Another general feature of solar and stellar disks is that they appear fainter towards the periphery. This phenomenon is known as "limb darkening" and is actually a matter of the viewing angle. When we look towards the middle of the solar disk, we see into rather deep and hot layers of its atmosphere. Contrarily, when we view the very edge of the solar disk, we only see the upper, cooler and dimmer parts. Thus, by looking at different areas of its disk, we are able to probe different depths of the solar atmosphere. This in turn permits to determine the structure (temperature, pressure, chemical composition, etc.) of the upper layers of the Sun. For more distant stars, however, their disks appear much too small for this kind of detailed observation. Despite much instrumental progress, therefore, fundamental observational information about stars is still lacking, especially for stars different from the Sun. This is one of the main reasons why the astronomers are thrilled by a new series of spectra from the FORS1 multi-mode instrument at the 8.2-m VLT ANTU telescope at Paranal. They "resolve" for the first time the surface of a normal star some 25,000 light-years away. This amazing observational feat has been possible with some help from a natural "magnifying glass". The road leading to this remarkable result is an instructive and interesting one. Gravitational microlensing ESO PR Photo 16a/01 ESO PR Photo 16a/01 [Preview - JPEG: 361 x 400 pix - 34k] [Normal - JPEG: 721 x 800 pix - 83k] [Hi-Res - JPEG: 2705 x 3000 pix - 536k] Caption : Schematic representation of the lightcurve of the EROS-BLG-2000-5 microlensing event. It represents the changing brightness of a background star, as its light is being amplified by a binary gravitational lens that passes the line-of-sight from the Earth to the star. The ordinate indicates the factor by which the intensity increases during the various phases of the lensing event, as compared to the normal brightness of the star. The moment of the second "caustic crossing" is indicated, during which the image of the star is substantially brighter. Spectral observations were made with the VLT at the times indicated by arrows. For details, see the text. The light from a distant star is affected by the gravity of the objects it passes on its way to us. This effect was predicted by Albert Einstein early last century and observationally confirmed in 1919 when a solar eclipse allowed the study of stars close to the line of sight of the Sun. Accurate positional measurements showed that the light from those remote stars was bent by the Sun's gravitational field. However, the light may not only be deflected, it can also be amplified . In that case, the massive object works like a giant "magnifying lens" that concentrates the light from the distant source. Effects of gravitational optics in space were first observed in 1979. When produced by extended, very heavy clusters of galaxies, they may take the form of large, spectacular arcs and well-separated multiple images, cf. ESO PR Photos 46d/98 and 46f/98 . Less massive lenses, however, produce images with extensions that are too small to be distinguished directly. Such "microlensing" effects occur when a compact body (usually a Milky Way star moving in its galactic orbit) passes almost directly between the observer and a luminous background object (usually also a star). One then sees that the brightness of that object rises and falls as the lens passes across the line-of-sight. The observed light intensity is described by a so-called "light curve", cf. PR Photo 16a/01 . Normally, the lensing object is a faint low-mass star, one of the most common objects in the Milky Way. Microlensing events ESO PR Photo 16b/01 ESO PR Photo 16b/01 [Preview - JPEG: 346 x 400 pix - 44k] [Normal - JPEG: 692 x 800 pix - 112k] [Hi-Res - JPEG: 2596 x 3000 pix - 584k] Caption : A photo of the sky area around the microlensing event EROS-BLG-2000-5 (indicated, near the centre) that is described in this Press Release. Technical information about this photo is available below. In most cases, these low-mass stars are too faint to be directly observed. This is especially so in crowded sky fields in which there are many much brighter stars - including the luminous giant stars that are monitored for microlensing effects. However, the gravity of a low-mass star is strong enough to produce a lensing effect if the geometrical alignment is sufficiently precise. This happens rarely, but by looking at a large number of background stars, it has been possible to detect a fair number of microlensing events during the past few years. International collaborations like Experience pour la Recherche d'Objets Sombres (EROS) , Optical Gravitational Lensing Experiment (OGLE) and Microlensing Observations in Astrophysics (MOA) scan the skies continuously for such microlensing events which typically last from a few weeks to some months. When a star is found to brighten in a way that looks like what is expected from microlensing, they send electronic alerts to other teams like Probing Lensing Anomalies NETwork (PLANET) and Microlensing Planet Search Project (MPS) who then intensively monitor the possible lensing events. One of the main goals of these research programmes is to search for "dark matter" . Indeed, microlensing effects are excellent tools for learning more about this mysterious component of the Universe, as they provide information about lensing objects that otherwise are too faint to be observed. However, microlensing events may also provide very useful information about the background object (the "source"), the light of which is amplified and magnified . When more light is available, more detailed (e.g., spectroscopic) observations can be made. In particular, on rare occasions, it can also help to "resolve" the surface of a distant star. Using distorted lenses If the lensing object is multiple , e.g., a binary star or a star with a planet, the gravitational lens will give rise to interesting phenomena. Whenever the gravitational fields from the two (or more) objects "co-operate", the lensing effect may become distorted and/or unusually strong. Depending on the exact geometry of the lens, i.e. the momentary, relative positions in the sky of the lensing objects and the background object, it is possible that the background source may at some moment be very sharply magnified . In fact, this effect may be so "sharp", that the light from a certain area of the extremely small, apparent disk of a distant star is enhanced much more than that from other areas of the disk. If so, the stellar light registered by the terrestrial telescope will come mainly from that particular area . From optical terminology, such an event is referred to as a "caustic crossing" . However, the exact circumstances are difficult and complex to calculate. The light curve during a lensing event depends on the relative motions of the involved objects or, in other words, on exactly how the distorting and magnifying glass (the lensing object), as seen from the Earth, moves across the background object. In this context, binary lenses are particularly interesting. Not only can they very efficiently enhance the brightness of the source, but there will also be two "caustic crossings" and two associated light maxima. This implies that once the first crossing/maximum has passed, it may be possible to predict when and how the source will be magnified a second time. In that case, the astronomers will have time to prepare for detailed observations at the moment of the second caustic crossing. In particular, this may then include spectroscopic observations that can reveal the structure of the background star. The May 2000 microlensing event ESO PR Photo 16c/01 ESO PR Photo 16c/01 [Preview - JPEG: 400 x 278 pix - 31k] [Normal - JPEG: 800 x 555 pix - 78k] [Hi-Res - JPEG: 3000 x 2081 pix - 528k] Caption : PR Photo 16c/01 shows a spectrum of EROS-BLG-2000-5 , obtained with the FORS1 multi-mode instrument at the 8.2-m VLT ANTU telescope at Paranal on June 25, 2000, before the second caustic crossing described in the text. A small part of the spectrum around the H-alpha line at wavelength 656.2 nm is enlarged in the insert. On 5 May 2000, the EROS group announced an apparently normal microlensing event in a direction a few degrees from the Galactic Centre ( PR Photo 16b/00 ). The brightness of the background star was rising and the PLANET team began to monitor it during its regular operations. About one month later, on 8 June 2000, the MPS team noticed that the event, now designated EROS-BLG-2000-5 , was undergoing an unexpected, sudden and significant brightening. PLANET observers immediately turned their full attention to it, monitoring it continuously from five different observing sites located at suitable longitudes around the Earth. The light curve changed dramatically while the source went through a first caustic crossing ( PR Photo 16a/00 ). On 10 June 2000, the PLANET team alerted the community that this particular event was indeed due to a multiple lens , thus indicating that another light maximum would follow at the second caustic crossing. While continuing to monitor the light curve in order to predict the timing of this second event, the PLANET team contacted ESO with an urgent request to carry out a novel set of observations. The astronomers called attention to the unique possibility of performing detailed spectral observations during the second caustic crossing that could provide information about the chemistry of the stellar atmosphere of the magnified star . ESO concurred and within a day, their observing proposal was granted "Director's Discretionary Time" with the FORS1 spectrograph on the 8.2-m VLT ANTU telescope at the appropriate moment. Some spectra were taken of the background star while it was still magnified, cf. PR Photo 16c/00 , but had not yet made the second caustic crossing. The star was now identified as a cool giant star , located some 25,000 light-years away [3] in the general direction of the Galactic Centre (in the "Galactic Bulge"). Then the team waited. Their predictions indicated that the second caustic crossing might last unusually long, several days rather than a more normal 10-20 hours. The observing plan was therefore changed to ensure that spectra could be taken on four consecutive nights ( PR Photo 16a/00 ) during this caustic crossing. The light curve would then first brighten, and then drop dramatically. During the four nights, the lens would successively magnify different areas of the disk of the cool giant star while "the gravitational magnifying glass slowly moved across it" , as seen from the VLT. First it would mostly be the light from the cool limb of the star that would be amplified, then the hotter middle of the disk, and finally the other, also cooler limb. The VLT observations ESO PR Photo 16d/01 ESO PR Photo 16d/01 [Preview - JPEG: 400 x 270 pix - 28k] [Normal - JPEG: 800 x 540 pix - 63k] [Hi-Res - JPEG: 3000 x 2025 pix - 416k] Caption : The red points are the nightly averages of the strength of the H-alpha absorption line as measured before (point to the left) and during the second caustic crossing. The fully drawn lines represent the expected change, according to two different simulations of the event. The models agree with the data in their general form, but differ on the last night when the trailing limb was crossing the caustic. The two simulations shown differ in their assumptions about the geometry of the event; further data and modeling are now refining these assumptions so that a more quantitative comparison can be made. On each of the four nights beginning on July 4, 5, 6 and 7, 2000, ESO astronomers at Paranal performed two hours of service observations according to the detailed planning of the microlensing team. Spectra were successfully taken of the giant star with the multi-mode FORS1 instrument at the 8.2-m VLT ANTU telescope at the moment of the second caustic crossing. The magnitude was about I=13 at the brightness peak, dropping about 2 magnitudes towards the end of the period ( PR Photo 16a/01 ). In a first scientific assessment of these unique spectra, the team concentrated on an absorption line in the red spectral region (the "H-alpha" line) that is produced by hydrogen in the stellar atmosphere. They found a clear change in the strength of this line of the source star during the four nights ( PR Photo 16d/01 ). No such variations were seen in the spectra of neighbouring stars that were observed simultaneously, providing a secure check that the observed changes are real. The astronomers then went on to interpret this change. For this they performed various simulations by means of a computer model of the atmosphere of the cool giant star, applying the expected effects of the lensing and then comparing with the observed spectra. The expected changes in the strength of the H-alpha absorption line during the crossing from two simple simulations are plotted as lines over the observed data in PR Photo 16d/01 . The observed changes of the H-alpha line during the caustic crossing agree well with the model calculations . During this event, the microlens magnifies successive areas of the stellar disk particularly strongly. To begin with, the light from the relatively cool, leading limb of the star dominates the registered spectrum - and here the absorption line strength drops slightly, exactly as expected. It then becomes stronger as the hotter areas near the middle of the disk "come into focus" and then again decreases when the cooler trailing limb is strongly magnified. This is the first time that this effect has ever been measured for all phases of a caustic crossing. More to come More quantitative predictions of the modeling will now be carried out, refining the geometry of the caustic crossing and involving many more spectral lines. This will allow a sophisticated tomographic analysis of the atmosphere of this star. For this, the detailed brightness measurements that were collected from over two thousand observations of EROS-BLG-2000-5 by PLANET observers in Tasmania, Western Australia, South Africa, Chile and the United States will be of great help in determining better the exact geometry of the event. In due time, the VLT spectra data will then make it possible to test directly the best models of stellar atmospheres now devised by astronomers. Observations like these are very important because they allow detailed investigation of a stellar atmosphere other than that of the Sun. It is remarkable that this is based on the "resolution" of the disk of a star over 25000 light-years away, i.e. about 1.6 billion times more distant than our own Sun [4]. More information Further detailed information is available at the PLANET website and in a research paper ( "H-alpha Equivalent Width Variations across the Face of a Microlensed K Giant in the Galactic Bulge" ) that appeared in the April 1, 2001 issue of the "Astrophysical Journal" (available on the web at ApJL 550, L173 or astro-ph0011380). Notes [1] Note the recent ESO Press Release 06/01 about the VLT Interferometer. Observations of binary stars that undergo eclipses from time to time also allow indirect studies of the surfaces of the two components; such objects, however, influence each other and cannot be characterized as "normal" stars. [2] The team (the PLANET collaboration) consists of Michael Albrow , Kailash C. Sahu (Space Telescope Science Institute, Baltimore, MD, USA) Jin H. An (Dept. of Astronomy, Ohio State University, Columbus, OH, USA), Jean-Philippe Beaulieu (Institut d'Astrophysique de Paris, France), John A. R. Caldwell , John W. Menzies , Pierre Vermaak (South African Astronomical Observatory, Cape Town, South Africa), Martin Dominik , Penny D. Sackett (Kapteyn Astronomical Institute, Groningen, The Netherlands) , John Greenhill , Kym Hill , Stephen Kane , Robert Watson (University of Tasmania, Hobart, Tasmania, Australia), Ralph Martin , Andrew Williams (Perth Observatory, Australia), Karen Pollard (Physics Dept., Gettysburg College, PA, USA) and Peter H. Hauschildt (Dept. of Physics and Astronomy & Center for Simulational Physics, University of Georgia, Athens, GA, USA). [3] The distance to the Sun is 149.6 million kilometres; 25,000 light-years = 240,000,000,000,000,000 kilometres. 1 billion = 1000 million. [4] The diameter of the cool giant star is approx. 15 million km (about ten times that of the Sun). At the indicated distance, 25,000 light-years, this corresponds to a very small angle, about 10 micro-arcsec. This is equal to the angle subtended by a human hair (diameter 50 microns = 0.05 mm) at a distance of 1000 km. Technical information about the photos PR Photo 16b/01 shows a 0.25-sec acquisition exposure of EROS-BLG-2000-5 , obtained with VLT ANTU + FORS1 in order to set up the spectrograph slit for the subsequent spectral exposures. The filter was Bessell-I (wavelength about 900 nm) and the field measures about 2 x 2 arcmin 2. North is up and East is left. The FORS1 spectrum shown in PR Photo 16c/01 is a composite of 300-sec exposures taken with with the 600B (spectral interval 390 - 580 nm), 600R (538 - 753 nm) and 600I (705 - 918 nm) gratings; the insert covers a 10 nm wide region near H-alpha.

Giant Eyes for the VLT Interferometer

NASA Astrophysics Data System (ADS)

2001-11-01

First Scientific Results with Combined Light Beams from Two 8.2-m Unit Telescopes Summary It started as a preparatory technical experiment and it soon developed into a spectacular success. Those astronomers and engineers who were present in the control room that night now think of it as the scientific dawn of the Very Large Telescope Interferometer (VLTI) . On October 29, 2001, ANTU and MELIPAL , two of the four VLT 8.2-m Unit Telescopes at the ESO Paranal Observatory, were linked for the first time. Light from the southern star Achernar (Alpha Eridani) was captured by the two telescopes and sent to a common focus in the observatory's Interferometric Laboratory. Following careful adjustments of the optical paths, interferometric fringes were soon recorded there, proving that the beams from the two telescopes had been successfully combined "in phase" . From an analysis of the observed pattern (the "fringe contrast"), the angular diameter of Achernar was determined to be 1.9 milli-arcsec. At the star's distance (145 light-years), this corresponds to a size of 13 million km. The observation is equivalent to measuring the size of a 4-metre long car on the surface of the Moon. This result marks the exciting starting point for operations with the Very Large Telescope Interferometer (VLTI) and it was immediately followed up by other scientific observations. Among these were the first measurements of the diameters of three red dwarf stars ("Kapteyn's star" - HD 33793, HD 217987 and HD 36395), a precise determination of the variable diameters of the pulsating Cepheid stars Beta Doradus and Zeta Geminorum (of great importance for the calibration of the universal distance scale), as well as a first interferometric measurement of the core of Eta Carinae , an intriguing, massive southern object that may possibly become the next supernova in our galaxy. This milestone is another important step towards the ultimate goal of the VLT project - to combine all four 8.2-m telescopes into the most powerful optical/infrared telescope system on Earth. When ready, it will be able to reveal at least 15 times finer details in astronomical objects than what is possible with any existing, single ground-based telescope. PR Photo 30a/01 : Overview of the VLT Interferometer . PR Photo 30b/01 : "Joint" stellar light-spot produced via ANTU and MELIPAL at the VLTI focus. PR Photo 30c/01 : Interferometric fringes from the star Achernar . PR Photo 30d/01 : Time sequence of fringes from Achernar. PR Photo 30e/01 : "Visibility curve" of the star Psi Phoenicis . Scientific Appendix First VLTI observations with two 8.2-m telescopes ESO PR Photo 30a/01 ESO PR Photo 30a/01 [Preview - JPEG: 357 x 400 pix - 82k] [Normal - JPEG: 713 x 800 pix - 208k] [Hi-Res - JPEG: 2673 x 3000 pix - 1.4M] ESO PR Photo 30b/01 ESO PR Photo 30b/01 [Preview - JPEG: 400 x 350 pix - 57k] [Normal - JPEG: 800 x 700 pix - 176k] Caption : PR Photo 30a/01 : Overview of the VLT Interferometer as it was operated when the light beams from two of the 8.2-m telescopes were combined. The VINCI instrument that was used for the present test, is located at the common focus in the Interferometric Laboratory. PR Photo 30b/01 shows one of the first "joint" light-spots from a star as seen at this VLTI focus and resulting from the superposition of light collected with the 8.2-m VLT ANTU and MELIPAL telescopes. Despite the long optical paths (about 200 m), the quality is excellent (FWHM = 0.45 arcsec). Note that this is not (yet) an image of the stellar surface. At 1 o'clock in the morning of October 30, 2001, ESO astronomers and engineers working in the VLTI Control Room successfully combined the light from ANTU and MELIPAL , two of the four 8.2-m VLT Unit Telescopes at the Paranal Observatory. The same night, a series of high-resolution test observations with the VINCI instrument [1] at the focus of the VLT Interferometer (VLTI) proved that this complex system was functioning extremely well, and within the technical specifications . Following about seven months after the moment of "VLTI first light" during which the light beams from two small test telescopes were combined - as described in detail in ESO Press Release 06/01 - this accomplishment above all serves as a demonstration of the possibilities and potential of interferometric observations with the four giant VLT telescopes. The two large telescopes used for the present test are separated by 102 metres. In order to properly combine the starlight received by them, a train of 25 mirrors is needed . All of them must be adjusted with a precision of one thousandth of a millimetre or better. As can be seen on PR Photo 30a/01 , the light from the observed star is first directed towards the Nasmyth focus by three mirrors in the telescope tube. From here, it continues towards the intermediate Coudé focus below the telescope and then onwards through a subterranean light duct to the VLTI Delay Lines that are installed in the Interferometric Tunnel . At the end of this long chain of mirrors and after traveling a distance of approximately 200 metres, the light finally reaches the VINCI instrument in which the two beams interact coherently (in phase) to produce "interferometric fringes". The tests have shown that the starlight arrives at the VINCI instrument with a pointing accuracy of about 1 arcsecond and, even more important, with a long-term tracking stability of the order of 0.2 arcseconds per hour. In fact, the image quality measured at the focus of VINCI is essentially identical to that of the individual telescopes at the Nasmyth (and Cassegrain) foci. Stellar images as sharp as 0.4 arcsec (note that this is the size of the "seeing disk" FWHM, not yet a real image of the stellar surface; the VLTI will start producing two-dimensional images of stars and other objects at a later stage) have been obtained at the interferometric focus, cf. PR Photo 30b/01 . The installation of an Adaptive Optics system (see below) will later reduce the image size to the theoretical limit of 0.057 arcsec (for observations with an 8.2-m telescope in the infrared K-band at wavelength 2.2 µm (or 0.032 arcsec in the J-band at 1.2 µm). First scientific results already during the test observations ESO PR Photo 30c/01 ESO PR Photo 30c/01 [Preview - JPEG: 400 x 368 pix - 50k] [Normal - JPEG: 800 x 736 pix - 136k] ESO PR Photo 30d/01 ESO PR Photo 30d/01 [Preview - JPEG: 400 x 332 pix - 168k] [Normal - JPEG: 800 x 663 pix - 440k] Caption : PR Photo 30c/01 shows the interferometric fringes of the star Achernar , as observed on the computer screen in the VLTI Control Room, at the moment of "First Light" with two 8.2-m VLT telescopes. PR Photo 30d/01 displays the time evolution of the interferometric fringes obtained on Achernar . Each horizontal scan represents a recorded fringe pattern, with time running vertically from bottom to top. PR Photo 30c/01 was extracted from one of these scans. The technical demonstration being so successful, the ESO astronomers and engineers involved in the development of the VLTI immediately decided to go one step further. And indeed, the interferometric fringes recorded with the light beams from two 8.2-m VLT telescopes during these initial technical tests have already led to some very valuable scientific results. The first star to be observed - the brightest star in the southern constellation Eridanus (The River) and known as Alpha Eridani or Achernar - is quite different from our Sun. It is estimated to be several times more massive and, with a surface temperature of about 20000 degrees, it is about three times hotter than our local star. The distance to Achernar has been measured by the ESA HIPPARCOS satellite as about 145 light-years, and from its apparent brightness, it is found to be almost 1000 times more luminous than the Sun. Consequently, it depletes its energy resources much faster and has a much shorter life expectancy (about 100 million years) than the Sun (about 10,000 million years). The new measurement with the VLTI found the angular diameter of Achernar to be 0.00192 ± 0.00005 arcsec . This is equivalent to the angle subtended by a 1 Euro coin (diameter 23.25 mm) as seen from a distance of 2500 km, or by a car (4 metres long) on the surface of the Moon. At the indicated distance, this angle also shows that the real size of Achernar is about 13 million kilometres, and that it is therefore nearly ten times larger than our Sun. Following that first observation, and in spite of the many technical tests scheduled at this moment of the VLTI commissioning work, the astronomers were able to carry out several other scientific observations. During this exciting first period of operation, among others, measurements were made of three red dwarf stars, three stars surrounded by disks, one red giant star, two Cepheid stars and one luminous blue variable star. Preliminary results from some of these observations are described in the Appendix. Angular measurements with the VLTI like the present ones will soon become routine and will allow astronomers to measure accurately the physical characteristics of many different types of stars. For instance, the precise measurement of the angular diameter of Achernar will make it possible to deduce directly and accurately its surface temperature, an important information for our understanding of the formation and evolution of such hot and massive stars. From 40-cm to 8.2-m The present event follows after half a year of much hard work by ESO astronomers and engineers. Earlier this year, the VLTI achieved "first fringes" by combining two small 40-cm siderostat telescopes ( ESO PR 06/01 ). Since then, ESO astronomers and engineers have upgraded the VLTI and are preparing it for regular observations that will start next year. The present results obtained with the combination of two giant telescopes constitute one important milestone along this road. Between March and October 2001, about 1000 individual measurements were carried out on celestial objects with the light beams from the small test telescopes. This process is on-going, as part of the commissioning of the VLTI, and is aimed at a detailed technical characterization of the interferometer and thorough knowledge of its performance. Such observations mainly serve to obtain technical data. Nevertheless, some of them also provide interesting scientific results . For example, during the week just prior to the first fringes now achieved with two large telescopes, nearly 150 measurements were obtained over 4 nights. Among them, five Mira stars (a type of large and cool, pulsating stars) and two close binary stellar systems were observed - some of them had never before been studied interferometrically. Moreover, a large number of objects were observed for calibration. These data are now being evaluated, and will help astronomers to refine their understanding of the capabilities of the VLTI - they will soon become available to the astronomical community via the VLT archive. In the same period, substantial additions were made to the system, e.g., a third Delay Line was installed in the Interferometric Tunnel. This allows the use of the telescopes on the east side of the beam combination laboratory (including MELIPAL) and also to combine the light beams from up to three telescopes at a later moment. The additional mirrors needed in order to permit the combination of the light from the two 8.2-m telescopes were installed. The extensive software that controls the telescopes and the instruments has undergone several revisions to accommodate the increased needs required by the more complex system of Unit Telescopes, delay lines and test instruments. At the same time, the overall reliability of the facility has been constantly improved. The path that the light travels from the two 8.2-m telescopes to the VINCI instrument must be kept constant to within a fraction of a micron , or better than one thousandth of a millimetre! Although it is therefore extremely sensitive to even very small disturbances, the VLT Interferometer has proven to be remarkably reliable and robust. For instance, an earthquake of magnitude 4+ on the Richter scale happened in August 2001 in the middle of a series of interferometric measurements. However, thanks to the many safeguards and compensatory measures built into the system, the VLTI continued to function all through the tremor. The observations were barely affected by the ground vibrations. It should also be noted that, unlike the 40-cm siderostat telescopes, the 8.2-m telescopes are so large that the images they produce are significantly affected by atmospheric turbulence. In order to overcome this problem, ESO is now developing a system of "Adaptive Optics" correctors ( MACAO ) which will "remove" the distortions introduced by the atmospheres by means of small, rapidly reacting computer-controlled deformable mirrors. From 2003, this system will increase the sensitivity of the VLTI by a factor of about 100 (5 magnitudes) compared to the present observations without adaptive optics. VLT Instrumentation The next steps in the VLTI project will be the integration of a new instrument working at a wavelength of 10 µm (the Mid-Infrared interferometric instrument for the VLTI (MIDI) ) in the middle of 2002, the addition of a fringe tracker ( FINITO ) and then of a 3-way, 3-photometric bands instrument (the near-infrared/red VLTI focal instrument (AMBER) ) at the beginning of 2003. Following closely will be the addition of three 1.8-m movable telescopes dedicated to interferometry, and of the Adaptive Optics system. With all these components in place, the VLTI will represent the most powerful interferometer available in the southern hemisphere, and will enable scientific investigations on a wide range of topics ranging from the direct detection of planets around other stars, to the formation and early evolution of stars, to the study of extragalactic objects. A dedication to Ariela Rijo On behalf of the staff, the Director of the Paranal Observatory adds this message: "The Paranal Observatory, while very pleased at the present success of the first fringes from two of the 8.2-m telescopes, at the same time is greatly saddened by the loss of our colleague Ariela Rijo who passed away on October 31" . "She was a wonderful person and an excellent colleague who contributed greatly to the implementation of the VLTI on Paranal. The Paranal Observatory dedicates this result to her memory". Note [1]: The VINCI instrument was built under ESO contract at the Observatoire de Paris (France) and the camera in this instrument was delivered by the MPI for Extraterrestrial Physics (Garching, Germany). The detector and the detector electronics was supplied by ESO. Scientific Appendix: First VLTI stellar measurements with two UTs ESO PR Photo 30e/01 ESO PR Photo 30e/01 [Preview - JPEG: 343 x 400 pix - 39k] [Normal - JPEG: 686 x 800 pix - 82k] Caption : PR Photo 30d/01 shows the "visibility curve" for the red giant star Psi Phoenicis as measured on two nights (16 data sets; three points to the right) with two VLT UTs (ANTU + MELIPAL) for three different positions in the sky and on four nights with the 40-cm test siderostats on a shorter 16-m baseline (8 data sets; one point to the left); see the text below. From the fitted curve, a preliminary value of the angular diameter is 8.21 ± 0.02 milli-arcsec (mas). This appendix presents some technical details of the measurements, obtained with the VLTI and two UTs during the first three test nights. While it must be emphasized that the stated results are still provisional, they clearly indicate the excellent performance of the VLTI already at this early stage and, not least, the great potential for important fundamental observations with this facility. Note in particular, that the quoted errors reflect the statistical uncertainty in the data only and that additional calibration errors must later be taken into account. The observational data were taken on a variety of astronomical objects, including three red dwarfs, three stars surrounded by disks, one red giant, two Cepheids and one luminous blue variable. All of these measurements were calibrated by observing a reference star of known angular size. Each data set required about ten minutes of continuous observations. Fringes were found on all pointed objects within a few minutes of time and kept for up to several hours. All data were deemed to be of high quality and will be analyzed in detail within the next weeks. A preliminary data reduction was possible for part of these objects and it gave the results listed below (all quoted values are uniform disk diameters): * For the blue dwarf Alpha Eridani , on which first fringes were found, 11 data sets were taken within three nights and an angular diameter of 1.92 ± 0.05 milli-arcsec (mas) could be estimated, which is precisely in line with previous measurements. * The nearby red dwarf HD 217987 was measured to have a diameter of 0.92 ± 0.05 mas, resulting from two data sets. This is the first measurement of the angular diameter of a star as small as a type M0 dwarf , and one of the very few available for cool main sequence stars in general. * The giant star HD 36167 was found from four data sets to have a diameter of 3.32 ± 0.02 mas. This measurement constitutes a significant refinement of the earlier, indirect estimate of 3.55 ± 0.06 mas (Cohen M. et al. 1999, Astronomical Journal 117, 1864). * For the three stars which are known to be surrounded by a disk, the following results were obtained: Epsilon Eridani 2.20 ± 0.02 mas (8 data sets in two nights); Fomalhaut (Alpha Piscis Austrini) 2.31 ± 0.02 mas (4 data sets); Beta Pictoris unresolved (4 data sets). Further analysis is expected to put a significant lower limit on the visibility for the latter star. * The two Cepheids Zeta Geminorum and Beta Doradus showed diameters of 1.78 ± 0.02 mas (7 data sets) and 2.00 ± 0.04 mas (6 data sets), respectively. The diameter of Zeta Geminorum has been measured before by three different interferometers. Its diameter is expected to vary between about 1.5 mas and 1.8 mas within ten days. On the date the VLTI data was taken, its phase was close to the foreseen maximum diameter. Beta Doradus has never been measured before. * The red giant Psi Phoenicis was measured on two nights (16 data sets) with the UTs for three different positions in the sky, hence with three different projected baselines. Some weeks earlier it had been measured on four nights with the 40-cm test siderostats (8 data sets) on a shorter 16-m baseline. The star was well resolved already in the previous measurements, but the addition of the data recently obtained with the UTs is of fundamental importance because with their longer baseline and larger light-gathering power, it now becomes possible to obtain visibility measurements beyond the first null, cf. PR Photo 30e/01 . Such measurements in the future will enable astronomers to measure fine details such as limb-darkening and deviations from spherical symmetry. The preliminary diameter value for this star is 8.21 ± 0.02 mas. * The enigmatic object Eta Carinae is a luminous blue variable, a supermassive star, which underwent a massive outburst in the 1840's. This outburst was responsible for the creation of the surrounding Homunculus Nebula . The central object is not well understood, but is likely to have a complex structure and therefore the first interferometric measurement with the VLTI is of great importance. Fringes with a low contrast (amplitude of about 20%) were detected, indicating that the central object is resolved on a scale of a few milliarcseconds. More observations will be obtained to further investigate this peculiar object.

Lots of Small Stars Born in Starburst Region

NASA Astrophysics Data System (ADS)

1999-10-01

Decisive Study of NGC 3603 with the VLT and ISAAC An international group of astronomers [1] has used the ESO Very Large Telescope (VLT) at Paranal (Chile) to perform unique observations of an interstellar nebula in which stars are currently being born. Thanks to the excellent imaging properties of the first of the four 8.2-m VLT Unit Telescopes, ANTU, they were able to demonstrate, for the first time, the presence of large numbers of small and relatively light, new-born stars in NGC 3603, a well-known "starburst" region in the Milky Way Galaxy . Until now, it has only been possible to observe brighter and much heavier stars in such nebulae. The new observations show that stars of all masses are being born together in the same starburst event, a fundamental result for our understanding of the very complex process of star formation. Background of the project The present research programme was granted observing time with VLT ANTU in April 1999. Its general aim is to investigate collective, massive star formation, in particular the coalescence of high- and low-mass stars in the violent environments of starburst regions . These are areas in which the processes that lead to the birth of new stars are particularly active just now. Several fundamental questions arise in this context. A very basic one is whether low-mass stars form at all in such environments. And if so, do they form together with the most massive stars in a starburst event or do they form at different times, before or after or perhaps on different timescales? Are low-mass stars born with any "preferred" mass that may possibly give further clues to the ongoing processes? All of this is most important in order to understand the detailed mechanisms of star formation. Most current theoretical scenarios explain how single stars form in an isolated, contracting gas cloud, but most stars in the Universe did not form in that simple way. Once some massive stars have formed in some place and start to shine, they will quickly affect their environment, but how much? At this moment, nobody knows for sure what determines the actual masses of individual stars that are formed in a very massive and turbulent gas cloud, although some ideas can now be tested with these new observations. The NGC 3603 region The new VLT observations are the key part of a larger research programme that also includes observations of the stellar cluster in the famous Tarantula Nebula in the Large Magellanic Cloud (LMC) with the NICMOS instrument on the Hubble Space Telescope (HST), as well as adaptive optics observations with ground-based telescopes of more quiescent, star-forming regions in the Galaxy. However, the team considered the starburst region NGC 3603 as the best target for this kind of investigation. It is situated in the far southern constellation Carina (The Keel) and can only be observed from the South. Moreover, such a study has to focus on the densest part of the cluster that can only be resolved with a very sensitive infrared (IR) instrument under the best seeing conditions. The VLT ANTU telescope and the multi-mode ISAAC facility are ideally suited for this purpose. NGC 3603 is located in the Carina spiral arm in the Milky Way galaxy at a distance of about 20,000 light-years (6 - 7 kpc). It is the only massive, galactic "HII-region" (so denoted by astronomers because part of its hydrogen is ionized) in which a central cluster of strongly UV-radiating stars of types "O" and "B" that ionize the nebula can be studied at visual and near-infrared wavelengths. This is because the line-of-sight is reasonably free of dust in this direction; the dimming in near-infrared radiation due to intervening matter between the nebula and us is only about a factor of 2 (contrary to 80 in visible light). The total mass of the hot O- and B-stars in NGC 3603 is over 2000 solar masses. Together, the more than fifty heavy and bright O-stars in NGC 3603 have about 100 times the ionizing power of the well-known Trapezium cluster in the Orion Nebula . In fact, the star cluster in NGC 3603 is in many respects very similar to the core of the large, ionizing cluster in the approx. eight times more distant Tarantula Nebula in the LMC. The new VLT observations ESO PR Photo 38a/99 ESO PR Photo 38a/99 [Preview - JPEG: 400 x 447 pix - 296k] [Normal - JPEG: 800 x 894 pix - 956k] [Full-Res - JPEG: 1366 x 1526 pix - 1.7M] ESO PR Photo 38b/99 ESO PR Photo 38b/99 [Preview - JPEG: 400 x 448 pix - 200k] [Full-Res - JPEG: 516 x 578 pix - 238k] Caption : ESO PR Photo 38a/99 is a composite "false-colour" infrared image of the starburst region NGC 3603 that is composed from three exposures obtained with the multi-mode ISAAC instrument at the Nasmyth focus of the first 8.2-m VLT Unit Telescope (ANTU) in April 1999. Three near-infrared filters were used, J s (wavelength 1.24 µm; here reproduced in blue), H (1.65 µm; green) and K s (2.17 µm; red). The intensities are scaled in logarithmic units and the field measures 3.4 x 3.4 arcmin 2 , or about 20 x 20 light-years 2 at the distance of the nebula. North is up; East to the left. The central cluster is the densest concentration of massive stars known in the Milky Way (this area is enlarged in ESO PR Photo 38b/99 ; the field shown is about 2.5 x 2.5 light-years 2 ). It hosts more than 50 hot O-type stars. The brightest star in the field is the red supergiant IRS4 ; it is located about 80 arcsec NE of the center. About 18 arcsec N of the center are the ring nebula and the bipolar outflows around the blue supergiant Sher25 . The photo also shows three proplyd-like objects [2] that have been recently discovered; they are similar to those seen in Orion Nebula, but 20-30 times more extended. About 1 arcmin SSE of the central cluster are seen the brightest members of the deeply embedded proto cluster IRS9 . The nebulosities to the South and West of the center appear to be red because of strong emission in the Bracket-gamma spectral line from hydrogen atoms at 2.166 µm. Images of the NGC 3603 region were obtained in three near-IR filter bands (J s , H and K s ) with the ISAAC instrument at the ANTU telescope. The observations were made in "service" mode on April 4 - 6 and 9, 1999, during selected periods when the (optical) seeing was equal to or better than 0.4 arcsec. This was a most essential requirement in order to achieve sufficient angular resolution (image sharpness) that would allow to do accurate photometric measurements of individual stars in this crowded cluster . This particular observing mode, during which ESO observers at ANTU kept careful track of the actual atmospheric conditions, contributed greatly to securing the very high quality images needed for this programme. In view of the many comparatively bright stars in the field, the observing strategy was to use the shortest possible exposure time (1.77 sec) to keep the number of over-exposed (saturated) stellar images to a minimum. As the minimum time required to stabilize the telescope's active optics control system and guarantee the optimum optical quality was about 1 min, thirty-four short exposures were made at each sky position and then co-added to an effective one-minute exposure. After each such series, the telescope pointing was offset in a random pattern up to 20 arcsec from the center; this enlarged the imaged sky area somewhat and facilitated the subtraction of the infrared emission from the sky background. The individual 1-min exposures were then very carefully co-aligned to obtain the highest possible spatial resolution and co-added. The resulting images cover a sky field of 3.4 x 3.4 arcmin 2 with a pixel size of 0.074 arcsec. The effective exposure times of the final broad-band images in the central 2.5 x 2.5 arcmin 2 area are 37, 45, and 48 min in the J s , H and K s filters, respectively. The final step involved the computer-aided detection of the individual stars in the frames, the measurement of their brightness as seen in the different wavebands and hence their infrared colours. About 20,000 intensity peaks were detected in each waveband at the same pixel location. However, after the rejection of very faint and spurious images and recording only objects that were detected independently in all three wavebands within the same pixel, the resulting list of measured stellar images was reduced to 6967 objects, still a substantial number, though. The brightness and colours of a star are an indication of its mass and age. By comparing the measured brightness and colours with computer simulations, the astronomers were therefore able to deduce the numbers of stars with different ages and masses in NGC 3603 . Detecting the low-mass stars in NGC 3603 The new VLT observations are the most sensitive ones made to date of this densely packed starburst region. They allowed the team to investigate in unprecedented detail the low-mass stellar population in this area. Although the low-mass stars in NGC 3603 are not exceedingly faint - they are in fact about 3 magnitudes brighter than ISAAC's detection limit - it is extremely difficult to detect them and to measure their brightness accurately because of the enormous range of brightnesses (more than a factor of 10,000) among the densely crowded stars in the inner region of the cluster. Unless high angular resolution, high optical stability and high overall sensitivity is achieved, the fainter images of the low-mass stars will "drown" in the light of the adjacent, much brighter stars. Only a powerful telescope/instrument combination like ANTU/ISAAC can successfully perform such a critical observation. The sensitivity limit obtained - set by the requirement that a star must be detected in all three infrared wavebands - corresponds to about one-tenth of a solar mass for young stars (in the astronomical sense) aged only 700,000 years, and still in the initial contraction phase. Thus, for the first time, it was possible to reach the necessary angular resolution and sensitivity to study a starburst region on a star-by-star basis down to this low mass limit. For comparison, the most sensitive observations of the more distant Tarantula Nebula only reach down to a limit of about 1 solar mass. A most important conclusion of this study is that there are lots of sub-solar mass stars in NGC 3603 , i.e., contrary to several theoretical predictions, these low-mass stars do form in violent starbursts ! The overall age of stars in the contraction phase that are located in the innermost region of NGC 3603 was found to be 300,000 - 1,000,000 years. The counts clearly show that this cluster is well populated in sub-solar mass stars. The next steps The team describes these new results in a scientific article ( "Low-mass stars in the massive HII region NGC 3603 - Deep NIR imaging with ANTU/ISAAC") that will appear in the European research journal Astronomy & Astrophysics in December 1999. Further information about related work on NGC 3603 is available at a dedicated webpage. The present VLT data will now be used for continued studies during which the limits of detection and measurement will be further pushed by means of advanced image processing and analysis. It will also be interesting to look further into possible variations of the number of stars with a given mass over the observed field, not least, to compare the new results with other ongoing studies of different regions (although less massive), e.g. with the Hubble Space Telescope and its infrared instrument NICMOS or with ground-based Adaptive Optics instruments. Notes [1] The team consists of Bernhard Brandl (Principal Investigator; Cornell University, Ithaca, New York, USA), Wolfgang Brandner (University of Hawaii, Honolulu, USA), Frank Eisenhauer (Max-Planck-Institut für Extraterrestrische Physik, Garching, Germany), Anthony F.J. Moffat (Université de Montreal, Canada), Francesco Palla (Osservatorio Astrofisico di Arcetri, Florence, Italy) and Hans Zinnecker (Astrophysikalisches Institut Potsdam, Germany). [2] Proplyd is an astronomical term that stands for "proto-planetary disk", i.e. disks around young stars in which planets may later form. However, although they look like the proplyds found in the Orion Nebula, the "proplyd-like" objects in NGC 3603 are not likely to develop into planets. How to obtain ESO Press Information ESO Press Information is made available on the World-Wide Web (URL: http://www.eso.org../ ). ESO Press Photos may be reproduced, if credit is given to the European Southern Observatory.

An Integrated Approach for Accessing Multiple Datasets through LANCE

NASA Astrophysics Data System (ADS)

Murphy, K. J.; Teague, M.; Conover, H.; Regner, K.; Beaumont, B.; Masuoka, E.; Vollmer, B.; Theobald, M.; Durbin, P.; Michael, K.; Boller, R. A.; Schmaltz, J. E.; Davies, D.; Horricks, K.; Ilavajhala, S.; Thompson, C. K.; Bingham, A.

2011-12-01

The NASA/GSFC Land Atmospheres Near-real time Capability for EOS (LANCE) provides imagery for approximately 40 data products from MODIS, AIRS, AMSR-E and OMI to support the applications community in the study of a variety of phenomena. Thirty-six of these products are available within 2.5 hours of observation at the spacecraft. The data set includes the population density data provided by the EOSDIS Socio-Economic Data and Applications Center (SEDAC). The purpose of this paper is to describe the variety of tools that have been developed by LANCE to support user access to the imagery. The long-standing Rapid Response system has been integrated into LANCE and is a major vehicle for the distribution of the imagery to end users. There are presently approximately 10,000 anonymous users per month accessing these imagery. The products are grouped into 14 applications categories such as Smoke Plumes, Pollution, Fires, Agriculture and the selection of any category will make relevant subsets of the 40 products available as possible overlays in an interactive Web Client utilizing Web Mapping Service (WMS) to support user investigations (http://lance2.modaps.eosdis.nasa.gov/wms/). For example, selecting Severe Storms will include 6 products for MODIS, OMI, AIRS, and AMSR-E plus the SEDAC population density data. The client and WMS were developed using open-source technologies such as OpenLayers and MapServer and provides a uniform, browser-based access to data products. All overlays are downloadable in PNG, JPEG, or GeoTiff form up to 200MB per request. The WMS was beta-tested with the user community and substantial performance improvements were made through the use of such techniques as tile-caching. LANCE established a partnership with Physical Oceanography Distributed Active Archive Center (PO DAAC) to develop an alternative presentation for the 40 data products known as the State of the Earth (SOTE). This provides a Google Earth-based interface to the products grouped in the same fashion as the WMS. The SOTE servers stream imagery and data in the OGC KML format and these feeds can be visualized through the Google Earth browser plug-in. SOTE provides visualization through a virtual globe environment by allowing users to interact with the globe via zooming, rotating, and tilting. In addition, SOTE also allows adding custom KML feeds. LANCE also provides datacasting feeds to facilitate user access to imagery for the 40 products and the related HDF-EOS products (available in a variety of formats). These XML-based data feeds contain data attribute and geolocation information, and metadata including an identification of the related application category. Users can subscribe to any feeds through the LANCE web site and use the PO DAAC Feed Reader to filter and view the content. The WMS, SOTE, and datacasting tools can be accessed through http://lance.nasa.gov.

Digital watermarking algorithm research of color images based on quaternion Fourier transform

NASA Astrophysics Data System (ADS)

An, Mali; Wang, Weijiang; Zhao, Zhen

2013-10-01

A watermarking algorithm of color images based on the quaternion Fourier Transform (QFFT) and improved quantization index algorithm (QIM) is proposed in this paper. The original image is transformed by QFFT, the watermark image is processed by compression and quantization coding, and then the processed watermark image is embedded into the components of the transformed original image. It achieves embedding and blind extraction of the watermark image. The experimental results show that the watermarking algorithm based on the improved QIM algorithm with distortion compensation achieves a good tradeoff between invisibility and robustness, and better robustness for the attacks of Gaussian noises, salt and pepper noises, JPEG compression, cropping, filtering and image enhancement than the traditional QIM algorithm.

Visual information processing; Proceedings of the Meeting, Orlando, FL, Apr. 20-22, 1992

NASA Technical Reports Server (NTRS)

Huck, Friedrich O. (Editor); Juday, Richard D. (Editor)

1992-01-01

Topics discussed in these proceedings include nonlinear processing and communications; feature extraction and recognition; image gathering, interpolation, and restoration; image coding; and wavelet transform. Papers are presented on noise reduction for signals from nonlinear systems; driving nonlinear systems with chaotic signals; edge detection and image segmentation of space scenes using fractal analyses; a vision system for telerobotic operation; a fidelity analysis of image gathering, interpolation, and restoration; restoration of images degraded by motion; and information, entropy, and fidelity in visual communication. Attention is also given to image coding methods and their assessment, hybrid JPEG/recursive block coding of images, modified wavelets that accommodate causality, modified wavelet transform for unbiased frequency representation, and continuous wavelet transform of one-dimensional signals by Fourier filtering.

Detection of Copy-Rotate-Move Forgery Using Zernike Moments

NASA Astrophysics Data System (ADS)

Ryu, Seung-Jin; Lee, Min-Jeong; Lee, Heung-Kyu

As forgeries have become popular, the importance of forgery detection is much increased. Copy-move forgery, one of the most commonly used methods, copies a part of the image and pastes it into another part of the the image. In this paper, we propose a detection method of copy-move forgery that localizes duplicated regions using Zernike moments. Since the magnitude of Zernike moments is algebraically invariant against rotation, the proposed method can detect a forged region even though it is rotated. Our scheme is also resilient to the intentional distortions such as additive white Gaussian noise, JPEG compression, and blurring. Experimental results demonstrate that the proposed scheme is appropriate to identify the forged region by copy-rotate-move forgery.

The Virgo Cluster of Galaxies in the Making

NASA Astrophysics Data System (ADS)

2004-10-01

VLT Observations of Planetary Nebulae Confirm the Dynamical Youth of Virgo [1] Summary An international team of astronomers [2] has succeeded in measuring with high precision the velocities of a large number of planetary nebulae [3] in the intergalactic space within the Virgo Cluster of galaxies. For this they used the highly efficient FLAMES spectrograph [4] on the ESO Very Large Telescope at the Paranal Observatory (Chile). These planetary nebulae stars free floating in the otherwise seemingly empty space between the galaxies of large clusters can be used as "probes" of the gravitational forces acting within these clusters. They trace the masses, visible as well as invisible, within these regions. This, in turn, allows astronomers to study the formation history of these large bound structures in the universe. The accurate velocity measurements of 40 of these stars confirm the view that Virgo is a highly non-uniform galaxy cluster, consisting of several subunits that have not yet had time to come to equilibrium. These new data clearly show that the Virgo Cluster of galaxies is still in its making. They also prove for the first time that one of the bright galaxies in the region scrutinized, Messier 87, has a very extended halo of stars, reaching out to at least 65 kpc. This is more than twice the size of our own galaxy, the Milky Way. PR Photo 29a/04: Velocity Measurements of Forty Intracluster Planetary Nebulae (FLAMES/VLT) PR Photo 29b/04: Intracluster Planetary Nebulae in the SUC field in the Virgo Cluster (Digital Sky Survey) A young cluster At a distance of approximately 50 million light-years, the Virgo Cluster is the nearest galaxy cluster. It is located in the zodiacal constellation Virgo (The Virgin) and contains many hundreds of galaxies, ranging from giant and massive elliptical galaxies and spirals like our own Milky Way, to dwarf galaxies, hundreds of times smaller than their big brethren. French astronomer Charles Messier entered 16 members of the Virgo cluster in his famous catalogue of nebulae. An image of the core of the cluster obtained with the Wide Field Imager camera at the ESO La Silla Observatory was published last year as PR Photo 04a/03. Clusters of galaxies are believed to have formed over a long period of time by the assembly of smaller entities, through the strong gravitational pull from dark and luminous matter. The Virgo cluster is considered to be a relatively young cluster because previous studies have revealed small "sub-clusters of galaxies" around the major galaxies Messier 87, Messier 86 and Messier 49. These sub-clusters have yet to merge to form a denser and smoother galaxy cluster. Recent observations have shown that the so-called "intracluster" space, the region between galaxies in a cluster, is permeated by a sparse "intracluster population of stars", which can be used to study in detail the structure of the cluster. Cosmic wanderers The first discoveries of intracluster stars in the Virgo cluster were made serendipitously by Italian astronomer, Magda Arnaboldi (Torino Observatory, Italy) and her colleagues, in 1996. In order to study the extended halos of galaxies in the Virgo cluster, with the ESO New Technology Telescope at La Silla, they searched for objects known as "planetary nebulae" [3]. Planetary nebulae (PNe) can be detected out to large distances from their strong emission lines. These narrow emission lines also allow for a precise measure of their radial velocities. Planetary Nebulae can thus serve to investigate the motions of stars in the halo regions of distant galaxies. In their study, the astronomers found several planetary nebulae apparently not related to any galaxies but moving in the gravity field of the whole cluster. These "wanderers" belonged to a newly discovered intracluster population of stars. Since these first observations, several hundreds of these wanderers have been discovered. They must represent the tip of the iceberg of a huge population of stars swarming among the galaxies in these enormous clusters. Indeed, as planetary nebulae are the final stage of common low mass stars - like our Sun - they are representative of the stellar population in general. And as planetary nebulae are rather short-lived (a few tens of thousand years - a blitz on astronomical timescales), astronomers can estimate that one star in about 8,000 million of solar-type stars is visible as a planetary nebula at any given moment. There must thus be a comparable number of stars in between galaxies as in the galaxies themselves. But because they are diluted in such a huge volume, they are barely detectable. Because these stars are predominantly old, the most likely explanation for their presence in the intracluster space is that they formed within individual galaxies, which were subsequently stripped of many of their stars during close encounters with other galaxies during the initial stages of cluster formation. These "lost" stars were then dispersed into intracluster space where we now find them. Thus planetary nebulae can provide a unique handle on the number, type of stars and motions in regions that may harbour a substantial amount of mass. Their motions contain the fossil record of the history of galaxy interaction and the formation of the galaxy cluster. Measuring the speed of dying stars ESO PR Photo 29a/04 ESO PR Photo 29a/04 Velocity Measurements of Forty Intracluster Planetary Nebulae [Preview - JPEG: 400 x 502 pix - 50k] [Normal - JPEG: 800 x 1004 pix - 330k] [Full Res - JPEG: 2321 x 2912 pix - 1.2M] Caption: ESO PR Photo 29a/04 shows the intracluster planetary nebulae radial velocity distributions in three different regions of the sky (identified with the following labels: FCJ, CORE and SUC) in the Virgo cluster core region. The central panel shows the image of the VIRGO cluster core obtained from the Digital Sky Survey. The four brighter galaxies in the field are on the left Messier 87 near the FCJ field, and Messier 86, Messier 84 and NGC 4388 in the SUC field. In the FCJ panel, the blue dashed line shows a Gaussian curve with a mean velocity, vrad= 1276 km/s, and a dispersion, σrad= 247 km/s. In CORE, the green dashed line shows a Gaussian curve with vrad= 1436 km/s and σrad= 538 km/s for Virgo Cluster dwarf ellipticals and lenticular galaxies within 2 degrees of Messier 87. In the SUC panel, the dashed red line shows a Gaussian curve with vrad= 1079 km/s and σrad= 286 km/s, associated to the Messier 84 (M84) peak. The overplotted dash-dotted lines show the SUC-FLAMES spectra of intracluster HII regions, which have radial velocities in the M84 and NGC 4388 velocity ranges. The international team of astronomers [2] went on further to make a detailed study of the motions of the planetary nebulae in the Virgo cluster in order to determine its dynamical structure and compare it with numerical simulations. To this aim, they carried out a challenging research programme, aimed at confirming intracluster planetary nebula candidates they found earlier and measuring their radial velocities in three different regions ("survey fields") in the Virgo cluster core. This is far from an easy task. The emission in the main Oxygen emission line from a planetary nebula in Virgo is comparable to that of a 60-Watt light bulb at a distance of about 6.6 million kilometres, about 17 times the average distance to the Moon. Furthermore intracluster planetary nebula samples are sparse, with only a few tens of planetary nebulae in a quarter of a degree square sky field - about the size of the Moon. Spectroscopic observations thus require 8 metre class telescopes and spectrographs with a large field of view. The astronomers had therefore to rely on the FLAMES-GIRAFFE spectrograph on the VLT [4], with its relatively high spectral resolution, its field of view of 25 arcmin and the possibility to take up to 130 spectra at a time. The astronomers studied a total of 107 stars, among which 71 were believed to be genuine intracluster planetary candidates. They observed between 21 and 49 objects simultaneously for about 2 hours per field. The three parts of the Virgo core surveyed contain several bright galaxies (Messier 84, 86, 87, and NGC 4388) and a large number of smaller galaxies. They were chosen to represent different entities of the cluster. The spectroscopic measurements could confirm the intracluster nature of 40 of the planetary nebulae studied. They also provided a wealth of knowledge on the structure of this part of the Virgo cluster. In The Making ESO PR Photo 29b/04 ESO PR Photo 29b/04 Intracluster Planetary Nebulae in the SUC field in the Virgo Cluster. (Digital Sky Survey) [Preview - JPEG: 400 x 471 pix - 55k] [Normal - JPEG: 800 x 942 pix - 512k] [Full Res - JPEG: 2189 x 2580 pix - 2.3M] Caption: ESO PR Photo 29b/04: Zoomed in view of the pointing relative to the SUC field. The image shows a 30 x 30 arcminute field centred on the Messier 86/ Messier 84 region of the Virgo cluster. The brighter galaxies in the field are (clockwise from the left) M86, M84 and NGC 4388. Their systemic velocities are -244, 1060 and 2524 km/s, respectively. Here the envelopes of bright galaxies are subtracted as much as possible for the detection of planetary nebulae embedded there. The larges circle indicates the FLAMES field-of-view. Intracluster planetary nebula candidates are marked by circles and show a highly non-uniform distribution in this field. The numbers near each circle indicate the measured line-of-sight velocity for that intracluster planetary nebula. The colour code used is blue for velocities smaller than the M84 systemic velocity (1060 km/s), red for larger velocities. In the first field near Messier 87 (M87), the astronomers measured a mean velocity close to 1250 km/s and a rather small dispersion around this value. Most stars in this field are thus physically bound to the bright galaxy M87, in the same way as the Earth is bound to the Sun. Magda Arnaboldi explains: "This study has led to the remarkable discovery that Messier 87 has a stellar halo in approximate dynamical equilibrium out to at least 65 kpc, or more than 200,000 light-years. This is more than twice the size of our own galaxy, the Milky Way, and was not known before." The velocity dispersion observed in the second field, which is far away from bright galaxies, is larger than in the first one by a factor four. This very large dispersion, indicating stars moving in very disparate directions at different speeds, also tells us that this field most probably contains many intracluster stars whose motions are barely influenced by large galaxies. The new data suggest as a tantalizing possibility that this intracluster population of stars could be the leftover from the disruption of small galaxies as they orbit M87. The velocity distribution in the third field, as deduced from FLAMES spectra, is again different. The velocities show substructures related to the large galaxies Messier 86, Messier 84 and NGC 4388. Most likely, the large majority of all these planetary nebulae belong to a very extended halo around Messier 84. Ortwin Gerhard (University of Basel, Switzerland), member of the team, is thrilled: "Taken together these velocity measurements confirm the view that the Virgo Cluster is a highly non-uniform and unrelaxed galaxy cluster, consisting of several subunits. With the FLAMES spectrograph, we have thus been able to watch the motions in the Virgo Cluster, at a moment when its subunits are still coming together. And it is certainly a view worth seeing!" More information The results presented in this ESO Press Release are based on a research paper ("The Line-of-Sight Velocity Distributions of Intracluster Planetary Nebulae in the Virgo Cluster Core" by M. Arnaboldi et al.) that has just appeared in the research journal Astrophysical Journal Letters Vol. 614, p. 33. Notes [1]: The University of Basel Press Release on this topic is available at http://www.zuv.unibas.ch/uni_media/2004/20041022virgo.html. [2]: The members of the team are Magda Arnaboldi (INAF, Osservatorio di Pino Torinese, Italy), Ortwin Gerhard (Astronomisches Institut, Universität Basel, Switzerland), Alfonso Aguerri (Instituto de Astrofisica de Canarias, Spain), Kenneth C. Freeman (Mount Stromlo Observatory, ACT, Australia), Nicola Napolitano (Kapteyn Astronomical Institute, The Netherlands), Sadanori Okamura (Dept. of Astronomy, University of Tokyo, Japan), and Naoki Yasuda (Institute for Cosmic Ray Research, University of Tokyo, Japan). [3]: Planetary nebulae are Sun-like stars in their final dying phase during which they eject their outer layers into surrounding space. At the same time, they unveil their small and hot stellar core which appears as a "white dwarf star". The ejected envelope is illuminated and heated by the stellar core and emits strongly in characteristic emission lines of several elements, notably oxygen (at wavelengths 495.9 and 500.7 nm). Their name stems from the fact that some of these nearby objects, such as the "Dumbbell Nebula" (see ESO PR Photo 38a/98) resemble the discs of the giant planets in the solar system when viewed with small telescopes. [4]: FLAMES, the Fibre Large Array Multi-Element Spectrograph, is installed at the 8.2-m VLT KUEYEN Unit Telescope. It is able to observe the spectra of a large number of individual, faint objects (or small sky areas) simultaneously and covers a sky field of no less than 25 arcmin in diameter, i.e., almost as large as the full Moon. It is the result of a collaboration between ESO, the Observatoire de Paris-Meudon, the Observatoire de Genève-Lausanne, and the Anglo Australian Observatory (AAO).

Four Eyes Are Better

NASA Astrophysics Data System (ADS)

2002-09-01

VLT Interferometer Passes Another Technical Hurdle Summary During the nights of September 15/16 and 16/17, 2002, preliminary tests were successfully carried out during which the light beams from all four VLT 8.2-m Unit Telescopes (UTs) at the ESO Paranal Observatory were successively combined, two by two, to produce interferometric fringes . This marks a next important step towards the full implementation of the VLT Interferometer (VLTI) that will ultimately provide European astronomers with unequalled opportunities for exciting front-line research projects. It is no simple matter to ensure that the quartet of ANTU, KUEYEN, MELIPAL and YEPUN , each a massive giant with a suite of computer-controlled active mirrors, can work together by sending beams of light towards a common focal point via a complex system of compensating optics. Yet, in the span of only two nights, the four VLT telescopes were successfully "paired" to do exactly this, yielding a first tantalizing glimpse of the future possibilities with this new science machine. While there is still a long way ahead to the routine production of extremely sharp, interferometric images, the present test observations have allowed to demonstrate directly the 2D-resolution capacity of the VLTI by means of multiple measurements of a distant star. Much valuable experience was gained during those two nights and the ESO engineers and scientists are optimistic that the extensive test observations with the numerous components of the VLTI will continue to progress rapidly. Five intense, technical test periods are scheduled during the next six months; some of these with the Mid-Infrared interferometric instrument for the VLTI (MIDI) which will soon be installed at Paranal. Later in 2003, the first of the four moveable VLTI 1.8-m Auxiliary Telescopes (ATs) will be put in place on the top of the mountain; together they will permit regular interferometric observations, also without having to use the large UTs. PR Photo 22a/02 : Delay Lines in the Interferometric Tunnel. PR Photo 22b/02 : Baselines and "Interferometric PSF" from observations of the star Achernar . Combining the VLT telescopes ESO PR Photo 22a/02 ESO PR Photo 22a/02 [Preview - JPEG: 503 x 400 pix - 81k] [Normal - JPEG: 1005 x 800 pix - 488k] [Hi-Res - JPEG: 3000 x 2389 pix - 2.8M] Caption : PR Photo 22a/02 : VLT Delay Lines in the Interferometric Tunnel. Less than one year after the first combination of two 8.2-m VLT telescopes - described in detail in ESO Press Release 23/01 - successful tests have now been carried out, during which all of the four telescopes were combined pairwise in rapid succession . Of the six combinations possible (ANTU-KUEYEN, ANTU-MELIPAL, ANTU-YEPUN, KUEYEN-MELIPAL, KUEYEN-YEPUN and MELIPAL-YEPUN), only the last one could not be used, because of the current geometrical configuration of the three delay lines installed so far. The combination of the light beams from two (or more) VLT Unit Telescopes is a daunting task. It involves pointing them simultaneously towards the same celestial object, ensuring optimal optical adjustment of the computer-controlled telescope mirrors (including the shape of the 8.2-m primary mirror by "active optics"), performing extremely smooth and stable tracking of the object as the Earth turns, guiding the light beams via additional ("coudé") mirrors into the "delay lines" installed in the Interferometric Tunnel below the telescope platform, keeping the total path lengths equal to within a fraction of a micron during hours at a time and finally, to register the interferometric fringes at the focal point of the VINCI instrument [1], where the light beams encounter each other. Next year, the first adaptive optics systems for the VLTI will be inserted below the telescopes. By drastically reducing the smearing effects of the turbulent atmosphere through which the light has to pass before it enters the telescopes, this will further "stabilize" the imaging and increase the sensitivity of the VLTI by a factor of almost 100. First results with four Unit Telescopes ESO PR Photo 22b/02 ESO PR Photo 22b/02 [Preview - JPEG: 573 x 400 pix - 78k] [Normal - JPEG: 1145 x 800 pix - 232k] Caption : PR Photo 22b/02 : The left panel shows the rather incomplete set of "baselines" used during the present, short interferometric test exposures (in interferometric terminology: the "UV-plane coverage"). Each baseline is represented by two opposite, short arcs, symmetric around the origin (centre) of the diagram. The colour-coded pattern reflects the telescope pairs (ANTU-KUEYEN = magenta, ANTU-MELIPAL = red, ANTU-YEPUN = green, KUEYEN-MELIPAL = cyan, KUEYEN-YEPUN = blue), as seen from the observed object. Due to the limited time available, this distribution is far from uniform and is quite elongated in one direction. To the right is shown the reconstructed, two-dimensional interferometric point-spread function (PSF) of the star Achernar (in "negative" - with most light in the darkest areas). It is the result of subsequent computer processing of the measurements with the different baselines. On the largest scale, the image consists of an inner, round distribution of light, 0.057 arcsec wide, surrounded by an outer, much weaker, broad "ring" and with a "white" zone between these two areas. This is the "Airy disk" for a single 8.2-m telescope at this infrared wavelength (the K-band at 2.2 µm). It represents the maximum resolution (image sharpness) obtainable when observing with a single telescope. As explained in the text, the interferometric "addition" of more telescopes greatly improves that resolution. The width of the individual - slightly S-shaped - lines ("fringes") in the inclined pattern visible in the inner area, about 0.003 arcsec, represents the achieved interferometric resolution in one direction (with an angular diameter of about 0.002 arcsec, the disk of Achernar is not resolved, making it a suitable object for this resolution test). The resolution in the perpendicular direction (along the lines) is evidently less - this is due to the specific (elongated) baseline pattern during these test observations (left panel). The image provides a direct illustration of the 20-fold increase in resolution of the VLTI over a single 8.2-m telescope . At this moment, three delay lines have been installed, but for the present first test, the VLTI engineers and astronomers used the telescopes in pairs, in order to set-up the various equipment configurations properly. In this way, they could also start "teaching" the computer control software to handle this very demanding process as efficiently and user-friendly as possible in the future. With the arrival of the science instrument AMBER in mid-2003, up to three beams can be combined simultaneously. It turned out that the various predictions of mirror positions and angles were quite accurate and only a moderate amount of time was needed to "obtain fringes" in all different configurations. Measurements were then made on a number of stars, among them the brightest star in the southern constellation Eridanus (The River), known as Alpha Eridani or Achernar , that was observed several times with the different telescope pairings. This star is a hot dwarf (spectral type "B5 IV") that is located at a distance of about 145 light-years. It has also been extensively observed during earlier VLTI tests. It is a very suitable object for the present resolution tests as its angular diameter is only about 0.002 arcsec and it therefore remains unresolved at the near-infrared wavelength of the K-band used (2.2 µm). In fact, the combination of these data (including also some that were obtained in October 2001) now makes it possible to reconstruct the first interferometric "point-spread function (PSF)" of a star obtained with the VLTI , cf. PR Photo 22b/02 . This is like an "interferometric image", except that the disk of this particular star remains unresolved. The angular resolution is inversely proportional to the aperture of a telescope for single telescope observation, and to the length of the "baseline" between two telescopes for the interferometric observation. However, observing interferometrically with two telescopes will improve the resolution only in the direction parallel to this baseline, while the resolution in the perpendicular direction will remain that of a single telescope. But then the use of other telescope pairs with different baseline orientations "adds" resolution in other directions. The reconstructed PSF of Achernar shown in PR Photo 22b/02 is obviously still very incomplete, due to the technical nature of the present tests and the limited time that was spent observing the star in each configuration. However, it already presents a powerful illustration of the extreme imaging sharpness that will be achieved with the VLTI.

First Visiting Astronomers at VLT KUEYEN

NASA Astrophysics Data System (ADS)

2000-04-01

A Deep Look into the Universal Hall of Mirrors Starting in the evening of April 1, 2000, Ghislain Golse and Francisco Castander from the Observatoire Midi-Pyrénées (Toulouse, France) [1] were the first "visiting astronomers" at Paranal to carry out science observations with the second 8.2-m VLT Unit Telescope, KUEYEN . Using the FORS2 multi-mode instrument as a spectrograph, they measured the distances to a number of very remote galaxies, located far out in space behind two clusters of galaxies. Such observations may help to determine the values of cosmological parameters that define the geometry and fate of the Universe. After two nights of observations, the astronomers came away from Paranal with a rich harvest of data and a good feeling. "We are delighted that the telescope performed so well. It is really impressive how far out one can reach with the VLT, compared to the `smaller' 4-meter telescopes with which we previously observed. It opens a new window towards the distant, early Universe. Now we are eager to start reducing and analysing these data!" , Francisco Castander said. Measuring the Geometry of the Universe with Multiple Images in Cluster Lenses The present programme is typical of the fundamental cosmological studies that are now being undertaken with the ESO Very Large Telescope (VLT). Clusters of galaxies are very massive objects. Their gravitational fields intensify ("magnify") and distort the images of galaxies behind them. The magnification factor for the faint background galaxy population seen within a few arcminutes of the centre of a massive cluster at intermediate distance (redshift z ~ 0.2 - 0.4, i.e., corresponding to a look-back time of approx. 2 - 4 billion years) is typically larger than 2, and occasionally much larger. The clusters thus function as gravitational lenses . They may be regarded as "natural telescopes" that help us to see fainter objects further out into space than would otherwise be possible with our own telescopes. In a few cases, the images of the objects behind the clusters are split into several components. Knowing the distance to the objects for which we see multiple images and the distribution of matter in the cluster that produce the lensing effect allows to determine the geometry of the universe in the corresponding direction , independently of its rate of expansion. For a given cluster lens, a minimum of three such multiple-imaged objects with measured distances and positions is in principle sufficient to determine the geometry of the universe in that direction, as expressed by the values of two of the main cosmological parameters, the density (Omega: ) and the cosmological constant (Lambda: ). Detailed observations of these cosmic mirages thus have a direct implication for our understanding of the universe in which we live. A study of the clusters of galaxies Abell 1689 and MS 1008 The first visiting astronomers to KUEYEN used FORS2 to measure the distances to some of the background objects that are being multiple-lensed by the cluster of galaxies Abell 1689 . This cluster was first discovered by American astronomer George Abell some thirty years ago when he studied photographic plates obtained at the Palomar Observatory. Since then, this cluster has been further observed and deep images taken by the Hubble Space Telescope (HST) have revealed at least five multiple-lensed objects in this direction. However, because of the faintness of these images, it has so far not been possible to measure the distances to those objects. This has only become possible now, with the advent of new and powerful astronomical instruments like the FORS2 spectrograph at KUEYEN. At the beginning of the night - before Abell 1689 was high enough in the sky to be observable - the astronomers also observed another cluster lens, MS 1008 . This cluster was discovered with the Einstein X-ray satellite and has been studied in great detail by means of images in different colours by the VLT ANTU telescope during the Science Verification phase. Spectra of distant lensed objects ESO PR Photo 10a/00 ESO PR Photo 10a/00 [Preview - JPEG: 400 x 446 pix - 67k] [Normal - JPEG: 800 x 892 pix - 1.0M] [Full-Res - JPEG: 942 x 1050 pix - 1.3M] Caption : Multi-colour image of the field in the galaxy cluster MS 1008, with a 24.5-mag lensed quasar (arrow) observed at redshift z = 4.0 during the present study. This image was obtained by the VLT/ANTU telescope during its Science Verification phase. The photo is based on a composite of four images with exposure times and seeing conditions of 82 min and 0.72 arcsec (B band), 90 min and 0.65 arcsec (V band), 90 min and 0.64 arcsec (R band) and 67 min and 0.55 arcsec (I band), respectively. The field is 1.8 x 1.6 arcmin 2 ; North is up and East is left. ESO PR Photo 10b/00 ESO PR Photo 10b/00 [Preview - JPEG: 400 x 341 pix - 46k] [Normal - JPEG: 800 x 681 pix - 112k] Caption : The spectrum obtained with FORS2 at KUEYEN of a quasar at redshift z = 4.0, lensed by the massive cluster of galaxies MS 1008. The redshifted Lyman-alpha line from hydrogen (rest wavelength 1216 Å in the far-ultraviolet part of the spectrum) is clearly seen in emission at 6025 Å as a high peak in the red spectral region. Another emission line, from four times ionized nitrogen (rest wavelength 1240 Å), is seen in the right wing of the Lyman-alpha line. The spectrum was obtained after two hours of exposure through a 1.0 arcsec slit in good atmospheric conditions (seeing: 0.6 arcsec). With the comparatively large field-of-view of FORS2 at VLT KUEYEN, the Toulouse team obtained spectra of very faint objects, not only in the cluster core region where the multiple-lensed background galaxies are found, but also in the outer regions of the cluster where the images of objects are not split into several images, but only magnified. One of the faint objects ( Photo 10a/00 ) turned out to be a very distant quasar with a redshift of about z = 4.0, as determined by the Lyman-alpha line well visible in the red region of its spectrum ( Photo 10b/00 ). The quasar is therefore located at a large distance that corresponds to when the universe was quite young, about 10% of its current age. The measured redshift was only slightly higher than what was predicted by the observers ( z = 3.6) on the basis of earlier multi-colour photometric measurements from VLT/ANTU [2]. The magnitude of this quasar is 24.5, i.e., 25 million times fainter than the faintest star that can be seen with the naked eye at a dark site. As the observers remark, this quasar, at the measured magnitude and redshift, is an intrinsically fainter member of its class. A good start Another dozen objects also showed spectral features that will allow the Toulouse team to determine their distances, once their data have been properly analysed. The detection of these spectral features in such distant and faint objects is a powerful demonstration of the extraordinary sensitivity of the KUEYEN/FORS2 constellation. It is also a fine result from the very first observing night with this new facility and an good illustration of the effective use of space- and ground-based telescopes within the same research project. The Toulouse team, with other colleagues, including Ian Smail (Durham University, UK) and Harald Ebeling (Institute for Astrophysics, Hawaii, USA), have again applied for observing time to continue this programme at the VLT , in order to measure the distances of multiple-lensed objects behind other massive clusters of galaxies observed with HST . With more observations of this type available, it will become possible to determine more accurately Omega and Lambda. Notes [1] The present project on the determination of cosmological parameters defining the geometry of the universe by means of multiple images that are gravitationally lensed by massive clusters of galaxies is carried out by a group of astronomers from the Observatoire Midi-Pyrenees (Toulouse, France), including Francisco Castander , Ghislain Golse , Jean-Paul Kneib and Genevieve Soucail . [2] The photometric redshift method to determine cosmological distances is based on measurement of colours. Depending on the redshift and hence, the distance, distinct features in the spectra of galaxies produce changes in the observed colours. More information about the photometric redshift code HyperZ is available at http://webast.ast.obs-mip.fr/hyperz.

A Pyramid Scheme for Constructing Geologic Maps on Geobrowsers

NASA Astrophysics Data System (ADS)

Whitmeyer, S. J.; de Paor, D. G.; Daniels, J.; Jeremy, N.; Michael, R.; Santangelo, B.

2008-12-01

Hundreds of geologic maps have been draped onto Google Earth (GE) using the ground overlay tag of Keyhole Markup Language (KML) and dozens have been published on academic and survey web pages as downloadable KML or KMZ (zipped KML) files. The vast majority of these are small KML docs that link to single, large - often very large - image files (jpegs, tiffs, etc.) Files that exceed 50 MB in size defeat the purpose of GE as an interactive and responsive, and therefore fast, virtual terrain medium. KML supports super-overlays (a.k.a. image pyramids), which break large graphic files into manageable tiles that load only when they are in the visible region at a sufficient level of detail (LOD), and several automatic tile-generating applications have been written. The process of exporting map data from applications such as ArcGIS® to KML format is becoming more manageable but still poses challenges. Complications arise, for example, because of differences between grid-north at a point on a map and true north at the equivalent location on the virtual globe. In our recent field season, we devised ways of overcoming many of these obstacles in order to generate responsive, panable, zoomable geologic maps in which data is layered in a pyramid structure similar to the image pyramid used for default GE terrain. The structure of our KML code for each level of the pyramid is self-similar: (i) check whether the current tile is in the visible region, (ii) if so, render the current overlay, (iii) add the current data level, and (iv) using four network links, check the visibility and LOD of four nested tiles. By using this pyramid structure we provide the user with access to geologic and map data at multiple levels of observation. For example, when the viewpoint is distant, regional structures and stratigraphy (e.g. lithological groups and terrane boundaries) are visible. As the user zooms to lower elevations, formations and ultimately individual outcrops come into focus. The pyramid structure is ideally suited to geologic data which tends to be unevenly exposed across the earth's surface.

Large-Scale Digital Geologic Map Databases and Reports of the North Coal District in Afghanistan

USGS Publications Warehouse

Hare, Trent M.; Davis, Philip A.; Nigh, Devon; Skinner, James A.; SanFilipo, John R.; Bolm, Karen S.; Fortezzo, Corey M.; Galuszka, Donna; Stettner, William R.; Sultani, Shafiqullah; Nader, Billal

2008-01-01

This report describes the Afghanistan coal resource maps and associated databases that have been digitally captured and maps that have been thus far converted to GIS databases. Several maps by V/O Technoexport, USSR (VOTU) and Bundesanstalt fur Bodenforschung (BGR), Hannover, Germany, are captured here. Most of the historical coal exploration is concentrated in north-central Afghanistan, a region referred to as the 'North Coal District', and almost all of the coal-related maps found Afghanistan Geological Survey (AGS) archives to date cover various locations within that district as shown in the index map. Most of the maps included herein were originally scanned during U.S. Geological Survey (USGS) site visits to Kabul in November 2004 and February 2006. The scanning was performed using equipment purchased by U.S. Agency for International Development (USAID) and U.S. Trade and Development Agency (USTDA) and installed at the AGS by USGS. Many of these maps and associated reports exist as single unpublished copies in the AGS archives, so these efforts served not only to provide a basis for digital capturing, but also as a means for preserving these rare geologic maps and reports. The data included herein represent most of the coal-related reports and maps that are available in the AGS archives. This report excludes the limited cases when a significant portion of a report's text could not be located, but it does not exclude reports with missing plates. The vector files are released using the Environmental Systems Research Institute (ESRI) Personal Geodatabase, ESRI shapefile vector format, and the open Geography Markup Language (GML) format. Scanned images are available in JPEG and, when rectified, GeoTIFF format. The authors wish to acknowledge the contributions made by the staff of the AGS Records and Coal Departments whose valuable assistance made it possible to locate and catalogue the data provided herein. We especially acknowledge the efforts of particular members of the coal team: Engineer Saifuddin Aminy (Team Leader); Engineer Gul Pacha Azizi; Engineer Abdul Haq Barakati; Engineer Abdul Basir; Engineer Mohammad Daoud; Engineer Abdullah Ebadi; Engineer Abdul Ahad Omaid; Engineer Spozmy; and Engineer Shapary Tokhi. The ongoing efforts of Engineer Mir M. Atiq Kazimi (Team leader); Engineer M. Anwar Housinzada; and Engineer Shereen Agha of the AGS Records Department to organize and catalogue the AGS material were invaluable in locating and preserving these data. The efforts of the entire AGS staff to personally preserve these data during war time, in the absence of virtually any supporting infrastructure, was truly remarkable. The efforts by the British Geological Survey (BGS) to assist the AGS in archiving these data, and the personal assistance provided by BGS (notably Robert McIntosh), to the USGS teams were also appreciated. The logistical support provided by the U.S. Embassy in Kabul, particularly the Afghanistan Reconstruction Group, was critical to the success of the USGS teams while in Afghanistan. Finally, the efforts of the Minister of the Ministry of Mines and Industries (M. Ibrahim Adel) to support the USGS coal resource assessment in Afghanistan, in both his current and former role as President of the Mines Affairs Department was vital to this effort.

STScI-PRC96-21b DISTANCE MEASUREMENTS TO A TYPE-IA SUPERNOVA BEARING GALAXY

NASA Technical Reports Server (NTRS)

2002-01-01

This Hubble Space Telescope image shows NGC 4639, a spiral galaxy located 78 million light-years away in the Virgo cluster of galaxies. The blue dots in the galaxy's outlying regions indicate the presence of young stars. Among them are young, bright stars called Cepheids, which are used as reliable milepost markers to obtain accurate distances to nearby galaxies. Astronomers measure the brightness of Cepheids to calculate the distance to a galaxy. Allan Sandage's team used Cepheids to measure the distance to NGC 4639, the farthest galaxy to which Cepheid distance has been calculated. After using Cepheids to calculate the distance to NGC 4639, the team compared the results to the peak brightness measurements of SN 1990N, a type Ia supernova located in the galaxy. Then they compared those numbers with the peak brightness of supernovae similarly calibrated in nearby galaxies. The team then determined that type Ia supernovae are reliable secondary distance markers, and can be used to determine distances to galaxies several hundred times farther away than Cepheids. An accurate value for the Hubble Constant depends on Cepheids and secondary distance methods. The color image was made from separate exposures taken in the visible and near-infrared regions of the spectrum with the Wide Field Planetary Camera 2. Credit: A. Sandage (Carnegie Observatories), A. Saha (Space Telescope Science Institute), G.A. Tammann, and L. Labhardt (Astronomical Institute, University Basel), F.D. Macchetto and N. Panagia (Space Telescope Science Institute/ European Space Agency), and NASA Image files in GIF and JPEG format and captions may be accessed on Internet via anonymous ftp from oposite.stsci.edu in /pubinfo.

Efficacy of ProTaper universal retreatment files in removing filling materials during root canal retreatment.

PubMed

Giuliani, Valentina; Cocchetti, Roberto; Pagavino, Gabriella

2008-11-01

The aim of this study was to evaluate the efficacy of the ProTaper Universal System rotary retreatment system and of Profile 0.06 and hand instruments (K-file) in the removal of root filling materials. Forty-two extracted single-rooted anterior teeth were selected. The root canals were enlarged with nickel-titanium (NiTi) rotary files, filled with gutta-percha and sealer, and randomly divided into 3 experimental groups. The filling materials were removed with solvent in conjunction with one of the following devices and techniques: the ProTaper Universal System for retreatment, ProFile 0.06, and hand instruments (K-file). The roots were longitudinally sectioned, and the image of the root surface was photographed. The images were captured in JPEG format; the areas of the remaining filling materials and the time required for removing the gutta-percha and sealer were calculated by using the nonparametric one-way Kruskal-Wallis test and Tukey-Kramer tests, respectively. The group that showed better results for removing filling materials was the ProTaper Universal System for retreatment files, whereas the group of ProFile rotary instruments yielded better root canal cleanliness than the hand instruments, even though there was no statistically significant difference. The ProTaper Universal System for retreatment and ProFile rotary instruments worked significantly faster than the K-file. The ProTaper Universal System for retreatment files left cleaner root canal walls than the K-file hand instruments and the ProFile Rotary instruments, although none of the devices used guaranteed complete removal of the filling materials. The rotary NiTi system proved to be faster than hand instruments in removing root filling materials.

Integration of digital gross pathology images for enterprise-wide access.

PubMed

Amin, Milon; Sharma, Gaurav; Parwani, Anil V; Anderson, Ralph; Kolowitz, Brian J; Piccoli, Anthony; Shrestha, Rasu B; Lauro, Gonzalo Romero; Pantanowitz, Liron

2012-01-01

Sharing digital pathology images for enterprise- wide use into a picture archiving and communication system (PACS) is not yet widely adopted. We share our solution and 3-year experience of transmitting such images to an enterprise image server (EIS). Gross pathology images acquired by prosectors were integrated with clinical cases into the laboratory information system's image management module, and stored in JPEG2000 format on a networked image server. Automated daily searches for cases with gross images were used to compile an ASCII text file that was forwarded to a separate institutional Enterprise Digital Imaging and Communications in Medicine (DICOM) Wrapper (EDW) server. Concurrently, an HL7-based image order for these cases was generated, containing the locations of images and patient data, and forwarded to the EDW, which combined data in these locations to generate images with patient data, as required by DICOM standards. The image and data were then "wrapped" according to DICOM standards, transferred to the PACS servers, and made accessible on an institution-wide basis. In total, 26,966 gross images from 9,733 cases were transmitted over the 3-year period from the laboratory information system to the EIS. The average process time for cases with successful automatic uploads (n=9,688) to the EIS was 98 seconds. Only 45 cases (0.5%) failed requiring manual intervention. Uploaded images were immediately available to institution- wide PACS users. Since inception, user feedback has been positive. Enterprise- wide PACS- based sharing of pathology images is feasible, provides useful services to clinical staff, and utilizes existing information system and telecommunications infrastructure. PACS-shared pathology images, however, require a "DICOM wrapper" for multisystem compatibility.

Integration of digital gross pathology images for enterprise-wide access

PubMed Central

Amin, Milon; Sharma, Gaurav; Parwani, Anil V.; Anderson, Ralph; Kolowitz, Brian J; Piccoli, Anthony; Shrestha, Rasu B.; Lauro, Gonzalo Romero; Pantanowitz, Liron

2012-01-01

Background: Sharing digital pathology images for enterprise- wide use into a picture archiving and communication system (PACS) is not yet widely adopted. We share our solution and 3-year experience of transmitting such images to an enterprise image server (EIS). Methods: Gross pathology images acquired by prosectors were integrated with clinical cases into the laboratory information system's image management module, and stored in JPEG2000 format on a networked image server. Automated daily searches for cases with gross images were used to compile an ASCII text file that was forwarded to a separate institutional Enterprise Digital Imaging and Communications in Medicine (DICOM) Wrapper (EDW) server. Concurrently, an HL7-based image order for these cases was generated, containing the locations of images and patient data, and forwarded to the EDW, which combined data in these locations to generate images with patient data, as required by DICOM standards. The image and data were then “wrapped” according to DICOM standards, transferred to the PACS servers, and made accessible on an institution-wide basis. Results: In total, 26,966 gross images from 9,733 cases were transmitted over the 3-year period from the laboratory information system to the EIS. The average process time for cases with successful automatic uploads (n=9,688) to the EIS was 98 seconds. Only 45 cases (0.5%) failed requiring manual intervention. Uploaded images were immediately available to institution- wide PACS users. Since inception, user feedback has been positive. Conclusions: Enterprise- wide PACS- based sharing of pathology images is feasible, provides useful services to clinical staff, and utilizes existing information system and telecommunications infrastructure. PACS-shared pathology images, however, require a “DICOM wrapper” for multisystem compatibility. PMID:22530178

A possible formation scenario for dwarf spheroidal galaxies - III. Adding star formation histories to the fiducial model

NASA Astrophysics Data System (ADS)

Alarcón Jara, A. G.; Fellhauer, M.; Matus Carrillo, D. R.; Assmann, P.; Urrutia Zapata, F.; Hazeldine, J.; Aravena, C. A.

2018-02-01

Dwarf spheroidal galaxies are regarded as the basic building blocks in the formation of larger galaxies and are the most dark matter dominated systems in the Universe, known so far. There are several models that attempt to explain their formation and evolution, but they have problems modelling the formation of isolated dwarf spheroidal galaxies. Here, we will explain a possible formation scenario in which star clusters form inside the dark matter halo of a dwarf spheroidal galaxy. These star clusters suffer from low star formation efficiency and dissolve while orbiting inside the dark matter halo. Thereby, they build the faint luminous components that we observe in dwarf spheroidal galaxies. In this paper, we study this model by adding different star formation histories to the simulations and compare the results with our previous work and observational data to show that we can explain the formation of dwarf spheroidal galaxies.

Robust image obfuscation for privacy protection in Web 2.0 applications

NASA Astrophysics Data System (ADS)

Poller, Andreas; Steinebach, Martin; Liu, Huajian

2012-03-01

We present two approaches to robust image obfuscation based on permutation of image regions and channel intensity modulation. The proposed concept of robust image obfuscation is a step towards end-to-end security in Web 2.0 applications. It helps to protect the privacy of the users against threats caused by internet bots and web applications that extract biometric and other features from images for data-linkage purposes. The approaches described in this paper consider that images uploaded to Web 2.0 applications pass several transformations, such as scaling and JPEG compression, until the receiver downloads them. In contrast to existing approaches, our focus is on usability, therefore the primary goal is not a maximum of security but an acceptable trade-off between security and resulting image quality.

Multiple-image hiding using super resolution reconstruction in high-frequency domains

NASA Astrophysics Data System (ADS)

Li, Xiao-Wei; Zhao, Wu-Xiang; Wang, Jun; Wang, Qiong-Hua

2017-12-01

In this paper, a robust multiple-image hiding method using the computer-generated integral imaging and the modified super-resolution reconstruction algorithm is proposed. In our work, the host image is first transformed into frequency domains by cellular automata (CA), to assure the quality of the stego-image, the secret images are embedded into the CA high-frequency domains. The proposed method has the following advantages: (1) robustness to geometric attacks because of the memory-distributed property of elemental images, (2) increasing quality of the reconstructed secret images as the scheme utilizes the modified super-resolution reconstruction algorithm. The simulation results show that the proposed multiple-image hiding method outperforms other similar hiding methods and is robust to some geometric attacks, e.g., Gaussian noise and JPEG compression attacks.

Experimental Equipment for Damping Capacity Analyze of High or Low Internal Friction Metallic Materials

NASA Astrophysics Data System (ADS)

Gârnet, I. A.; Stanciu, S.; Hopulele, I.; Zaharia, M. G.; Cimpoesu, N.; Chicet, D. L.; Crăciun, R. C.

2017-06-01

An experimental equipment, type torsion pendulum was made in laboratory in order to analyze the damping capacity of metallic materials. The scheme of the equipment is presented, 2D and 3D visions at real scale. The equipment functioning (mechanical and electrical part) and principles are presented. In this article we present some preliminary experimental results obtained on different materials (aluminium, steel etc.) using two different methods for registration the outputs (one based on optoelectronic device with Arduino acquisition board and second on video analyze (cinematic review: video to jpeg) of the damped motion of the lead pendulum). Steel materials were with shoot penning surface modification with and without heat treatment in order to establish the heat treatment influence on the damping capacity property.

Digital video technologies and their network requirements

DOE Office of Scientific and Technical Information (OSTI.GOV)

R. P. Tsang; H. Y. Chen; J. M. Brandt

1999-11-01

Coded digital video signals are considered to be one of the most difficult data types to transport due to their real-time requirements and high bit rate variability. In this study, the authors discuss the coding mechanisms incorporated by the major compression standards bodies, i.e., JPEG and MPEG, as well as more advanced coding mechanisms such as wavelet and fractal techniques. The relationship between the applications which use these coding schemes and their network requirements are the major focus of this study. Specifically, the authors relate network latency, channel transmission reliability, random access speed, buffering and network bandwidth with the variousmore » coding techniques as a function of the applications which use them. Such applications include High-Definition Television, Video Conferencing, Computer-Supported Collaborative Work (CSCW), and Medical Imaging.« less

Optimal color coding for compression of true color images

NASA Astrophysics Data System (ADS)

Musatenko, Yurij S.; Kurashov, Vitalij N.

1998-11-01

In the paper we present the method that improves lossy compression of the true color or other multispectral images. The essence of the method is to project initial color planes into Karhunen-Loeve (KL) basis that gives completely decorrelated representation for the image and to compress basis functions instead of the planes. To do that the new fast algorithm of true KL basis construction with low memory consumption is suggested and our recently proposed scheme for finding optimal losses of Kl functions while compression is used. Compare to standard JPEG compression of the CMYK images the method provides the PSNR gain from 0.2 to 2 dB for the convenient compression ratios. Experimental results are obtained for high resolution CMYK images. It is demonstrated that presented scheme could work on common hardware.

FORS am Very Large Telescope der Europäischen Südsternwarte

NASA Astrophysics Data System (ADS)

1998-09-01

Erstes wissenschaftliches Beobachtungsinstrument liefert eindrucksvolle Bilder Entsprechend dem straffen Zeitplan wird das ESO Very Large Teleskop Projekt (VLT-Projekt) auf dem Cerro Paranal in Nord-Chile verwirklicht: die volle Betriebsbereitschaft des ersten der vier 8,2m-Einzelteleskope wird Anfang des nächsten Jahres erreicht sein. Am 15. September 1998 wurde ein weiterer wichtiger Meilenstein erfolgreich, rechtzeitig und innerhalb des Kostenplans erreicht. Nur wenige Tage nach seiner Montage am ersten 8,2m-Einzelteleskop des VLT (UT1) konnte FORS1 ( FO cal R educer and S pectrograph) als erstes einer Gruppe leistungsfähiger und komplexer wissenschaftlicher Instrumente seine Beobachtungstätigkeit beginnen. Von Anfang an konnte es eine Reihe exzellenter astronomischer Bilder aufnehmen. Dieses bedeutende Ereignis eröffnet eine Fülle neuer Möglichkeiten für die europäische Astronomie. FORS - ein Höhepunkt an Komplexität FORS1 und das zukünftige Zwillingsinstrument (FORS2) sind das Ergebnis einer der eingehendsten und fortschrittlichsten technologischen Studien, die je für ein Instrument der bodengebundenen Astronomie durchgeführt wurden. Dieses einzigartige Instrument ist nun im Cassegrain-Fokus installiert und verschwindet beinahe, trotz seiner Dimensionen von 3 x 1.5m (Gewicht 2.3t), unterhalb des riesigen 53 m 2 großen Zerodurspiegels. Um die große Spiegelfläche und die hervorragende Bildqualität von UT1 optimal auszunützen, wurde FORS speziell so konstruiert, daß es die lichtschwächsten und entferntesten Objekte im Weltall untersuchen kann. Bald wird dieses komplexe VLT-Instrument den europäischen Astronomen erlauben, die derzeitigen Beobachtungshorizonte entscheidend zu erweitern. Die beiden FORS-Instrumente sind Vielzweck-Beobachtungsinstrumente, die in mehreren unterschiedlichen Beobachtungsarten eingesetzt werden können. Beispielsweise können Bilder mit zwei verschiedenen Abbildungsmaßstäben (Vergrößerungen) sowie Spektren mit unterschiedlicher spektraler Auflösung von einzelnen oder mehreren Objekten aufgenommen werden. Dabei erlaubt der schnelle Wechsel zwischen den unterschiedlichen Beobachtungsarten z.B. zunächst die Aufnahme und direkt anschließend die Spektroskopie weit entfernter Galaxien. Damit kann dann u.a. die stellare Zusammensetzung und die Entfernung bestimmt werden. Als eines der leistungsfähigsten astronomischen Instrumente seiner Art wird FORS1 ein wahres Arbeitspferd für die Untersuchung des fernen Universums darstellen. Der Bau von FORS Das FORS-Projekt wird unter ESO-Kontrakt von einem Konsortium dreier deutscher astronomischer Institute durchgeführt, der Landessternwarte Heidelberg und den Universitäts-Sternwarten von Göttingen and München. Bis zur Beendigung des Projekts werden die beteiligten Institute Arbeit im Umfang von ca. 180 Mann-Jahren eingebracht haben. Bei der Landessternwarte Heidelberg lag die Leitung des Projekts. Hier wurde außerdem das gesamte optische System konstruiert, die Beschaffung der Komponenten der abbildenden Optik und der Zusatzoptiken für Spektroskopie und Polarimetrie durchgeführt und die spezielle Computersoftware geschrieben, mit der die von FORS gelieferten Daten verarbeitet und ausgewertet werden. Darüber hinaus wurde in der Werkstatt der Sternwarte ein Teleskopsimulator gebaut, mit dem alle wesentlichen Funktionen von FORS in Europa getestet werden konnten, bevor das Instrument zum Paranal (Chile) transportiert wurde. An der Universitäts-Sternwarte Göttingen wurden Konstruktion, Herstellung und Zusammenbau der gesamten Mechanik von FORS durchgeführt. Der größte Teil der Präzisionsteile, insbesondere der Multispalteinheit, wurde in der feinmechanischen Werkstatt der Sternwarte hergestellt. Die Beschaffung der großen Instrumentengehäuse und Flansche, die Computeranalysen für mechanische und thermische Stabilität des empfindlichen Spektrographen und die Herstellung der speziellen Werkzeuge für Handhabung, Wartung und Justierung lag ebenso in der Verantwortung dieser Sternwarte wie die Tests der zahlreichen opto- und elektromechanischen Funktionen. Die Universitäts-Sternwarte München war verantwortlich für das Projektmanagement, Integration und Test des gesamten Instruments im Labor, für Planung und Einbau aller Elektronik und Elektromechanik, sowie für Entwicklung und Test der gesamten Software, die FORS in allen Teilen vollständig per Computer steuert (z.B. Filter- und Grismräder, Verschlüsse, Spalteinheit für die Vielspaltspektroskopie, Masken, alle optischen Komponenten, Elektromotoren, Encoder usw.). Zusätzlich wurde Computersoftware geschrieben, mit der die komplexen astronomischen Beobachtungen mit FORS vorbereitet werden und das Verhalten des Instruments durch eine ständige Kontrolle der gesammelten wissenschaftlichen Daten überwacht wird. Als Gegenleistung für den Bau von FORS erhalten die Astronomen der drei beteiligten Institute des FORS-Konsortiums eine gewisse Anzahl von Nächten an "garantierter Beobachtungszeit" am VLT. In dieser Beobachtungszeit werden verschiedene Forschungsprojekte durchgeführt, deren Themen unter anderem von kleinen Körpern im äußeren Sonnensystem über Untersuchungen von Sternen im Endstadium und den von ihnen abgestoßenen Gaswolken bis zur Erforschung ferner Galaxien und Quasare reichen, die Aufschluß über die frühen Zeiten unseres Universums geben. Erste Tests von FORS1 am VLT-UT1: ein großartiger Erfolg Nach sorgfältiger Vorbereitung hat das FORS-Konsortium nun mit der Inbetriebnahme ("Commissioning") des Instruments begonnen. Dazu gehören ein eingehender Nachweis der spezifizierten Leistungsfähigkeit am Teleskop, die Überprüfung der korrekten Funktionsweise unter Softwaresteuerung vom Kontrollraum auf Paranal, und am Ende dieses Prozesses eine Demonstration, daß das Instrument seinen angestrebten wissenschaftlichen Zweck erfüllt. Während der Durchführung dieser Tests gelangen dem Commissioning-Team auf Paranal eine Reihe von Aufnahmen verschiedener astronomischer Objekte, von denen einige hier wiedergegeben sind. Sie wurden alle mit FORS in der Standardauflösung gewonnen (Bildfeldgröße 6.8 x 6.8 Bogenminuten, Pixelgröße 0.20 Bogensekunden) und zeigen einige der eindrucksvollen Möglichkeiten, die das neue Instrument bietet. Spiralgalaxie NGC 1288 ESO PR Photo 37a/98 ESO PR Photo 37a/98 [Preview - JPEG: 800 x 908 pix - 224k] [High-Res - JPEG: 3000 x 3406 pix - 1.5Mb] Farbaufnahme der Spiralgalaxie NGC 1288, aufgenommen in der ersten Beobachtungsnacht von FORS ("Nacht des ersten Lichts"). Das erste Photo zeigt eine Dreifarbenaufnahme der schönen Spiralgalaxie NGC 1288 im südlichen Sternbild Fornax. PR Photo 37a/98 umfaßt das gesamte Feld, das mit der 2048 x 2048 Pixel großen CCD-Kamera abgebildet wurde. Es wurde aus drei CCD-Aufnahmen zusammengesetzt, die bei gutem Seeing in verschiedenen Farben in der "Nacht des ersten Lichts" (15. September 1998) aufgenommen wurden. Diese Galaxie mit einem Durchmesser von rund 200000 Lichtjahren ist etwa 300 Millionen Lichtjahre entfernt, ihre Fluchtgeschwindigkeit beträgt 4500 km/sec. Technische Informationen : Photo 37a/98 ist ein Komposit von drei Aufnahmen in den drei Filtern B (420nm, 6 Minuten belichtet), V (530nm, 3 Minuten) und I (800nm, 3 Minuten) während einer Periode mit 0.7 Bogensekunden Seeing. Das gezeigte Feld ist 6.8 x 6.8 Bogenminuten groß. Norden ist links, Osten unten. Entfernter Galaxienhaufen ESO PR Photo 37b/98 ESO PR Photo 37b/98 [Preview - JPEG: 657 x 800 pix - 248k] [High-Res - JPEG: 2465 x 3000 pix - 1.9Mb] Ein ungewöhnlicher Galaxienhaufen in der Umgebung des Quasars PB5763 . ESO PR Photo 37c/98 ESO PR Photo 37c/98 [Preview - JPEG: 670 x 800 pix - 272k] [High-Res - JPEG: 2512 x 3000 pix - 1.9Mb] Vergrößerung von PR Photo 37b/98; sie zeigt mehr Einzelheiten des ungewöhnlichen Galaxienhaufens. Die nächsten Photos wurden von einer 5-minütigen Aufnahme im Nahen Infrarot reproduziert, die ebenfalls in der "Nacht des ersten Lichts" von FORS1 (15. September 1998) gewonnen wurde. PR Photo 37b/98 zeigt einen Himmelsausschnitt in der Nähe des Quasars PB5763, in dem auch ein ungewöhnlicher, sehr weit entfernter Haufen von Galaxien zu sehen ist. Er besteht aus einer großen Zahl lichtschwacher Galaxien, die bisher noch nicht eingehend untersucht wurden. Dieser Haufen ist ein gutes Beispiel für die Art von Objekten, auf die viel Beobachtungszeit mit FORS verwendet werden wird, sobald der reguläre Beobachtungsbetrieb begonnen hat. Eine Vergrößerung des gleichen Feldes ist in PR Photo 37c/98 wiedergegeben. Sie zeigt die einzelnen Mitglieder dieses Galaxienhaufens im Detail. Man beachte besonders die interessante spindelförmige Galaxie, die anscheinend einen äquatorialen Ring aufweist. Neben einer schönen Spiralgalaxie sind auch noch viele weitere lichtschwache Galaxien zu erkennen. Sie sind entweder Zwerggalaxien und Mitglieder des Haufens oder befinden sich sehr viel weiter entfernt im Hintergrund des Haufens. Technische Informationen : PR Photos 37b/98 (als Negativ reproduziert) und 37c/98 (Positiv) stammen von einer Aufnahme, die bei 0.8 Bogensekunden Seeing durch ein I-Filter (nahes Infrarot, 800nm) gewonnen wurde. Die Belichtungszeit betrug 5 Minuten, und es wurde eine Flatfield-Korrektur durchgeführt. Das gezeigte Feld ist 6.8 x 6.8 Bogenminuten bzw. 2.5 x 2.3 Bogenminuten groß. Norden ist links oben, Osten links unten. Spiralgalaxie NGC 1232 ESO PR Photo 37d/98 ESO PR Photo 37d/98 [Preview - JPEG: 800 x 912 pix - 760k] [High-Res - JPEG: 3000 x 3420 pix - 5.7Mb] Ein Farbbild der Spiralgalaxie NGC 1232, aufgenommen am 21. September 1998. ESO PR Photo 37e/98 ESO PR Photo 37e/98 [Preview - JPEG: 800 x 961 pix - 480k] [High-Res - JPEG: 3000 x 3602 pix - 3.5Mb] Vergrößerung des Zentrums von PR Photo 37d/98. Dieses spektakuläre Bild der großen Spiralgalaxie NGC 1232 (Photo 37d/98) wurde am 21. September 1998 unter guten Beobachtungsbedingungen erhalten. Es wurde aus drei Einzelaufnahmen im ultravioletten, blauen und roten Licht zusammengesetzt. Die Farben der verschiedenen Regionen sind deutlich sichtbar: Das Zentralgebiet enthält ältere, rötlich leuchtende Sterne (Photo 37e/98), während die Spiralarme von jungen, bläulichen Sternen und roten Sternentstehungsgebieten bevölkert sind. Man beachte die gestörte Begleitgalaxie am linken Rand (Photo 37d/98), die wie der griechische Buchstabe "Theta" aussieht. NGC 1232 liegt 20 Grad südlich des Himmelsäquators im Sternbild Eridanus. Obwohl die Entfernung dieser Galaxie ungefähr 100 Millionen Lichtjahre beträgt, kann man auf Grund der exzellenten Bildqualität einen unglaublichen Reichtum an Details erkennen. Bei dieser Entfernung entspricht die Kantenlänge des Bildfeldes etwa 200000 Lichtjahren oder etwa der doppelten Größe unserer Milchstraße. Technische Informationen : Photos 37d/98 und 37e/98 sind ein Komposit von drei Aufnahmen in den drei Filtern U (360nm, 10 Minuten belichtet), B (420nm, 6 Minuten) und R (600nm, 2 Minuten 30 Sekunden) während einer Periode mit 0.7 Bogensekunden Seeing. Das gezeigte Feld ist 6.8 x 6.8 Bogenminuten bzw. 1.6 x 1.8 Bogenminuten groß. Norden ist oben, Osten links. Note: [1] Diese Pressemitteilung wird gemeinsam (auf Englisch und Deutsch) von der Europäischen Südsternwarte, der Landessternwarte Heidelberg und den Universitäts-Sternwarten Göttingen und München herausgegeben. An English Version of this Press Release is also available. Zugang zu ESO Presseinformationen ESO Presseinformationen werden im World Wide Web zur Verfügung gestellt (URL: http://www.eso.org/outreach/press-rel/). ESO Pressephotos dürfen veröffentlicht werden, wenn die Europäische Südsternwarte als Urheber genannt wird.

A Vanishing Star Revisited

NASA Astrophysics Data System (ADS)

1999-07-01

VLT Observations of an Unusual Stellar System Reinhold Häfner of the Munich University Observatory (Germany) is a happy astronomer. In 1988, when he was working at a telescope at the ESO La Silla observatory, he came across a strange star that suddenly vanished off the computer screen. He had to wait for more than a decade to get the full explanation of this unusual event. On June 10-11, 1999, he observed the same star with the first VLT 8.2-m Unit Telescope (ANTU) and the FORS1 astronomical instrument at Paranal [1]. With the vast power of this new research facility, he was now able to determine the physical properties of a very strange stellar system in which two planet-size stars orbit each other. One is an exceedingly hot white dwarf star , weighing half as much as the Sun, but only twice as big as the Earth. The other is a much cooler and less massive red dwarf star , one-and-a-half times the size of planet Jupiter. Once every three hours, the hot star disappears behind the other, as seen from the Earth. For a few minutes, the brightness of the system drops by a factor of more than 250 and it "vanishes" from view in telescopes smaller than the VLT. A variable star named NN Serpentis ESO PR Photo 30a/99 ESO PR Photo 30a/99 [Preview - JPEG: 400 x 468 pix - 152k] [Normal - JPEG: 800 x 936 pix - 576k] [High-Res - JPEG: 2304 x 2695 pix - 4.4M] Caption to ESO PR Photo 30a/99 : The sky field around the 17-mag variable stellar system NN Serpentis , as seen in a 5 sec exposure through a V(isual) filter with VLT ANTU and FORS1. It was obtained just before the observation of an eclipse of this unsual object and served to centre the telescope on the corresponding sky position. The field shown here measures 4.5 x 4.5 armin 2 (1365 x 1365 pix 2 ; 0.20 arcsec/pix). The field is somewhat larger than that shown in Photo 30b/99 and has the same orientation to allow comparison: North is about 20° anticlockwise from the top and East is 90° clockwise from that direction. The unsual star in question is designated NN Serpentis , or just NN Ser . As the name indicates, it is located in the constellation of Serpens (The Serpent), about 12° north of the celestial equator. A double letter, here "NN", is used to denote variable stars [2]. It is a rather faint object of magnitude 17, about 25,000 times fainter than what can be perceived with the unaided eye. The distance is about 600 light-years (180 pc). In July 1988, Reinhold Häfner performed observations of NN Ser (at that time still known by its earlier name PG 1550+131 ) with the Danish 1.54-m telescope at La Silla. He was surprised, but also very pleased to discover that it underwent a very deep eclipse every 187 minutes. Within less than 2 minutes, the brightness dropped by a factor of more than 100 (5 magnitudes). During the next 9 minutes, the star completely disappeared from view - it was too faint to be observed with this telescope. It then again reappeared and the entire event was over after just 11 minutes. Why eclipses are so important for stellar studies An eclipse occurs when one of the stars in a binary stellar system moves in front of the other, as seen by the observer. The effect is similar to what happens during a solar eclipse when the Moon moves in front of the Sun. In both cases, the eclipse may be partial or total , depending on whether or not the eclipsed star (or the Sun) is completely hidden from view. The occurence of eclipses in stellar systems, as seen from the Earth, depends on the spatial orientation of the orbital plane and the sizes of the two stars. Two eclipses take place during one orbital revolution, but they may not both be observable. The physical properties of the two stars in a binary system (e.g., the sizes of the stars, the size and shape of the orbit, the distribution of the light on the surfaces of the stars, their temperatures etc.) can be determined from the measured "light-curve" of the system (a plot of brightness vrs. time). The stars are always too close to each other to be seen as anything but a point of light. The light-curve thus describes the way the total brightness of the two stars changes during one orbital revolution, including the variation of the combined light of the two components as they cover each other during the eclipses. Already in 1988, it was concluded that the eclipse observed in NN Ser must be caused by a bright and hot star (a white dwarf ) being hidden by another body, most probably a red dwarf star . Because of the dramatic effect, this object soon became known as the "Vanishing Star" , cf. ESO Press Release 09/88 (8 December 1988). Critical information missing for NN Ser One particularly critical piece of information is needed for a light-curve study to succeed, that is whether the eclipse is "total" or "partial" . If during the eclipse one star is entirely hidden by the other, we only see the light of the star in front. In that case, the measured amount of light does not change during the phase of totality. The light-curve is "flat" at the bottom of the minimum and the measured brightness indicates the intrinsic luminosity of the eclipsing star. Moreover, for a given orbit, the duration of the totality is proportional to the size of that star. This crucial information was not available for NN Ser . The brightness at minimum was simply too faint to allow any measurements of the system with available telescopes during this phase. For this reason, the properties of the eclipsing star could only be guessed. Reaching for the bottom The new VLT observations have overcome this. Thanks to the powerful combination of the 8.2-m ANTU telescope and the multi-mode FORS1 instrument, it was possible to measure the complete lightcurve of NN Ser , also during the darkest phase of the eclipse. This extreme observation demanded most careful preparation. Since there is very little light available, the longest possible integration time must be used in order to collect a sufficient number of photons and to achieve a reasonable photometric accuracy. However, the eclipse only lasts a few minutes and it would only be possible to exposure and read-out a few, normal exposures from the CCD camera, not enough to fully characterize the light curve at minimum. Reinhold Häfner decided to use another method. By having the telescope perform a controlled change of position on the sky ("drift") during the exposure, the light from NN Ser before, during and after the eclipse will not be registered on the same spot of the camera detector, but rather along a line. He carefully chose a direction in which this line would not cross those of other stars in the neighbourhood of NN Ser . This was ensured by rotating FORS1 to a predetermined position angle. The drift rate was fixed as one pixel (0.20 arcsec) per 3 seconds of time, a compromise between the necessary integration time and desired time resolution that would give the best chance to document the exact shape of the light-curve . In theory, this would then allow the measurement of the intensity along the recorded trail of NN Ser and hence its brightness at any given time during the eclipse. But how deep would the eclipse be? Would the resulting exposure on each pixel at minimum light be long enough to register a measurable signal? Seeing the light from the cool star! ESO PR Photo 30b/99 ESO PR Photo 30b/99 [Preview - JPEG: 400 x 464 pix - 156k] [Normal - JPEG: 800 x 927 pix - 584k] [High-Res - JPEG: 2292 x 2662 pix - 4.1M] ESO PR Photo 30c/99 ESO PR Photo 30c/99 [Preview - JPEG: 472 x 400 pix - 48k] [Normal - JPEG: 943 x 800 pix - 96k] Caption to ESO PR Photo 30b/99 : 18.5-min "drift" exposure with VLT ANTU and FORS1 of the sky field around the variable stellar system NN Ser (indicated with an arrow). The telescope moved 1 pixel (0.20 arcsec) every 3 seconds so that the images of the stars in the field are trailed from left to right. After some minutes, the very deep eclipse of NN Ser begins when the brightness drops dramatically during the first partial phase. The star is clearly visible at a constant level all through the total phase at minimum light. It then brightens during the second partial phase and is back to the former level after approximately 10.5 min. The FORS1 instrument was rotated by about 70° to ensure that the trail of NN Ser would not overlap those of the neighbouring stellar images during this special exposure. The field shown measures 2.7 x 2.7 armin 2 and may be compared with that shown in Photo 30a/99; it has the same orientation. Caption to ESO PR Photo 30c/99 : The light-curve of the variable stellar system NN Ser , as extracted from the drift exposure shown in Photo 30b/99 . The count rate is proportional to the brightness of the object; it is about 18,000 counts/pix outside the eclipse and decreases to about 70 counts during the total eclipse (since the full range of the eclipse is shown here, this low level is almost indistinguishable from 0 in this figure). Various properties of the two stars in the NN Ser system may be determined from the shape of the light-curve. The fact that the light-curve is "flat" at the bottom is a clear sign that the eclipse is total , i.e. the hot white dwarf star is completely hidden behind the cool red dwarf star. As ESO PR Photo 30b/99 shows, ANTU and FORS1 did manage this difficult observation! Aided by an excellent seeing of 0.5 arcsec, i.e. a good concentration of the light on each pixel, the recorded signal from NN Ser - although very faint - is well measurable at all times during the eclipse . In the mean, about 70 counts/pixel were registered at the minimum, down from about 18,000 outside the eclipse ( Photo 30c/99 ). The ratio is then about 250, corresponding to just over 6 magnitudes. The measured magnitude during eclipse is 23.0 in the V-band (green-yellow; wavelength 550 nm). Of even greater importance is the fact that the light-curve is found to be perfectly flat at the bottom, i.e. the eclipse is most certainly total . The white dwarf star is therefore being completely hidden as it moves behind the cooler and larger star, and we see only the latter during the eclipse. As explained above, this then allows to determine many of its properties. For instance, the fact that the light-curve has no obvious "soft shoulders" at the beginning and end of the total phase indicates that the white dwarf abruptly disappears from view. Thus the faint star cannot have a very extended atmosphere, otherwise the brightness change would have been more gradual. The total phase was found to last 7 m 37 s and each of the partial phases only 1 m 26 s. This shows that the orbit must be nearly perpendicular to the plane of the sky. This angle is referred to as the orbital inclination ; for NN Ser , it must be in the interval between 84° - 90°. A preliminary analysis indicates that the diameter of the cool star is between 200,000 and 245,000 km, i.e. about 1.5 times that of planet Jupiter. The white dwarf is even smaller; its diameter is between 25,000 and 31,000 km, or about twice the size of the Earth. The distance between the two stars is 660,000 km, or half the size of the Sun. Thus NN Ser is really a very small system - it would easily fit into our central star! The surface temperatures are widely different, about 55,000 and 2,800 degrees, respectively. By adding to this analysis earlier measurements of the orbital velocity of the white dwarf star, it is possible to estimate the mass of the cool star as between 0.10 and 0.14 solar masses. The white dwarf is significantly heavier, about 0.57 solar masses. Stellar objects with masses below approx. 0.08 solar mass are believed to be brown dwarfs , i.e. "still-born" stars in which nuclear fusion did not ignite. Since the mass of the cool star in NN Ser is near this limit, could it perhaps be such an object? A spectrum of the cool star ESO PR Photo 30d/99 ESO PR Photo 30d/99 [Preview - JPEG: 480 x 400 pix - 60k] [Normal - JPEG: 960 x 800 pix - 136k] Caption to ESO PR Photo 30d/99 : The spectrum of the cool dwarf star in the variable stellar system NN Ser . The 5 min exposure was obtained during the total phase of the eclipse, when the magnitude of the system was V = 23.0. Several TiO bands are clearly visible in this slightly smoothed tracing. A few deep and narrow "absorption" features are residuals from sky subtraction. The original resolution is 0.55 nm/pix. A spectral type of M6 or later is deduced for NN Ser . The spectrum of a more nearby (and hence much brighter) M6.5 dwarf star (temperature approx. 2600 degrees) is shown below for comparison. The VLT has already delivered the answer: it turns out to be no . The cool component of NN Ser may be a very small and faint object, but it is a real star that harbours nuclear processes in its interior. The temperature is on the high side for a brown dwarf, but the definite proof can only be obtained from the spectrum. ANTU and FORS1 were able to obtain a spectrum of NN Ser during the total eclipse, i.e. at a time when the visual magnitude was 23.0, cf. Photo 30d/99 . The exposure had to be limited to 5 min only, in order to ensure that there would be no contamination by extra light from the much brighter white dwarf companion star, as this is the case during the partial phases of the eclipse. Despite the difficult circumstances, it was possible to record a faint spectrum in the 600 - 900 nm (red - near-IR) wavelength interval. Although it is quite noisy, several molecular bands of TiO (titanium oxide) are well visible; VO (vanadium oxide) bands may also be present. They allow the classification of the spectrum as that of a very-late-type star, of spectral type M6 or later . This is in reasonable agreement with the mentioned temperature around 2800 degrees. In any case, this spectrum is quite unlike that of a brown dwarf, thus confirming that the cool companion star in NN Ser is a normal hydrogen-burning red dwarf star . NN Ser: a "missing link" in stellar theory The binary system NN Ser is now in an evolutionary stage that is referred to as the pre-cataclysmic phase. It will be followed by the cataclysmic phase , during which a gas stream will flow from the larger star to the smaller one. This phenomenon is characterized by frequent and abrupt increase in brightness. While many stars are known that are now in that unstable phase, only a few stars have ever been found to be in the preceding, transitory phase. Of these, NN Ser is the only one that has such a deep eclipse and for which it has now become possible to determine quite well the properties of the two components. NN Ser thus represents a most welcome example of a "missing link" in the theory of stellar evolution. It is therefore of great interest to perform further observations of such a rare object. They will include attempts to obtain more spectra to define the spectral type of the cool star very accurately. This will allow a critical check of current theories of atmospheres and evolutionary computations for the smallest and lightest stars. But for now, Reinhold Häfner looks forward to further nights at Paranal with the ESO astronomers there. "We worked together in a wonderful way during these demanding observations", he said, "and without their great support all of this would have been next to impossible!" Notes [1] These observations were carried out during "guaranteed observing time", allocated to the three German institutes that built the FORS instrument. More details about this instrument and related issues are available in ESO Press Release 14/98. [2] Astronomers designate variable stars according to the constellation in which they are seen in the sky and the order in which they are recognized as having variable brightness. For historical reasons, the first variable star in a given constellation (that is not already known by a greek letter, e.g. "Delta Cephei") is designated as "R" (e.g. "R Coronae Borealis"), the second as "S", etc. until "Z". Then follow "RR", "RS",..."RZ", "SS"..."SZ" until "ZZ" and only then from the beginning of the alphabet, "AA"..."AZ", "BA".. etc. until "QZ". How to obtain ESO Press Information ESO Press Information is made available on the World-Wide Web (URL: http://www.eso.org../ ). ESO Press Photos may be reproduced, if credit is given to the European Southern Observatory.

The Formation of Formaldehyde on Interstellar Carbonaceous Grain Analogs by O/H Atom Addition

NASA Astrophysics Data System (ADS)

Potapov, Alexey; Jäger, Cornelia; Henning, Thomas; Jonusas, Mindaugas; Krim, Lahouari

2017-09-01

An understanding of possible scenarios for the formation of astrophysically relevant molecules, particularly complex organic molecules, will bring us one step closer to the understanding of our astrochemical heritage. In this context, formaldehyde is an important molecule as a precursor of methanol, which in turn is a starting point for the formation of more complex organic species. In the present experiments, for the first time, following the synthesis of CO, formaldehyde has been produced on the surface of interstellar grain analogs, hydrogenated fullerene-like carbon grains, by O and H atom bombardment. The formation of H2CO is an indication for a possible methanol formation route in such systems.

Baseline coastal oblique aerial photographs collected from Breton Island, Louisiana, to the Alabama-Florida border, July 13, 2013

USGS Publications Warehouse

Morgan, Karen L.M.; Westphal, Karen A.

2014-01-01

The U.S. Geological Survey (USGS) conducts baseline and storm response photography missions to document and understand the changes in vulnerability of the Nation's coasts to extreme storms. On July 13, 2013, the USGS conducted an oblique aerial photographic survey from Breton Island, Louisiana, to the Alabama-Florida border, aboard a Cessna 172 flying at an altitude of 500 feet (ft) and approximately 1,000 ft offshore. This mission was flown to collect baseline data for assessing incremental changes since the last survey, and the data can be used in the assessment of future coastal change. The images provided here are Joint Photographic Experts Group (JPEG) images. ExifTtool was used to add the following to the header of each photo: time of collection, Global Positioning System (GPS) latitude, GPS longitude, keywords, credit, artist (photographer), caption, copyright, and contact information. The photograph locations are an estimate of the position of the aircraft and do not indicate the location of any feature in the images (see the Navigation Data page). These photographs document the configuration of the barrier islands and other coastal features at the time of the survey. Pages containing thumbnail images of the photographs, referred to as contact sheets, were created in 5-minute segments of flight time. These segements can be found on the Photos and Maps page. Photographs can be opened directly with any JPEG-compatible image viewer by clicking on a thumbnail on the contact sheet. Table 1 provides detailed information about the GPS location, name, date, and time each of the 1242 photographs taken along with links to each photograph. The photography is organized into segments, also referred to as contact sheets, and represent approximately 5 minutes of flight time. (Also see the Photos and Maps page). In addition to the photographs, a Google Earth Keyhole Markup Language (KML) file is provided and can be used to view the images by clicking on the marker and then clicking on either the thumbnail or the link above the thumbnail. The KML files were created using the photographic navigation files.

Baseline coastal oblique aerial photographs collected from Dauphin Island, Alabama, to Breton Island, Louisiana, August 8, 2012

USGS Publications Warehouse

Morgan, Karen L.M.; Westphal, Karen A.

2014-01-01

The U.S. Geological Survey (USGS) conducts baseline and storm response photography missions to document and understand the changes in vulnerability of the Nation's coasts to extreme storms. On August 8, 2012, the USGS conducted an oblique aerial photographic survey from Dauphin Island, Alabama, to Breton Island, Louisiana, aboard a Cessna 172 at an altitude of 500 feet (ft) and approximately 1,000 ft offshore. This mission was flown to collect baseline data for assessing incremental changes since the last survey, and the data can be used in the assessment of future coastal change. The images provided here are Joint Photographic Experts Group (JPEG) images. Exiftool was used to add the following to the header of each photo: time of collection, Global Positioning System (GPS) latitude, GPS longitude, keywords, credit, artist (photographer), caption, copyright, and contact information. The photograph locations are an estimate of the position of the aircraft and do not indicate the location of any feature in the images (see the Navigation Data page). These photographs document the configuration of the barrier islands and other coastal features at the time of the survey. Pages containing thumbnail images of the photographs, referred to as contact sheets, were created in 5-minute segments of flight time. These segements can be found on the Photos and Maps page. Photographs can be opened directly with any JPEG-compatible image viewer by clicking on a thumbnail on the contact sheet. Table 1 provides detailed information about the GPS location, name, date, and time each of the 1241 photographs taken along with links to each photograph. The photography is organized into segments, also referred to as contact sheets, and represent approximately 5 minutes of flight time. (Also see the Photos and Maps page). In addition to the photographs, a Google Earth Keyhole Markup Language (KML) file is provided and can be used to view the images by clicking on the marker and then clicking on either the thumbnail or the link above the thumbnail. The KML files were created using the photographic navigation files.

SEMG signal compression based on two-dimensional techniques.

PubMed

de Melo, Wheidima Carneiro; de Lima Filho, Eddie Batista; da Silva Júnior, Waldir Sabino

2016-04-18

Recently, two-dimensional techniques have been successfully employed for compressing surface electromyographic (SEMG) records as images, through the use of image and video encoders. Such schemes usually provide specific compressors, which are tuned for SEMG data, or employ preprocessing techniques, before the two-dimensional encoding procedure, in order to provide a suitable data organization, whose correlations can be better exploited by off-the-shelf encoders. Besides preprocessing input matrices, one may also depart from those approaches and employ an adaptive framework, which is able to directly tackle SEMG signals reassembled as images. This paper proposes a new two-dimensional approach for SEMG signal compression, which is based on a recurrent pattern matching algorithm called multidimensional multiscale parser (MMP). The mentioned encoder was modified, in order to efficiently work with SEMG signals and exploit their inherent redundancies. Moreover, a new preprocessing technique, named as segmentation by similarity (SbS), which has the potential to enhance the exploitation of intra- and intersegment correlations, is introduced, the percentage difference sorting (PDS) algorithm is employed, with different image compressors, and results with the high efficiency video coding (HEVC), H.264/AVC, and JPEG2000 encoders are presented. Experiments were carried out with real isometric and dynamic records, acquired in laboratory. Dynamic signals compressed with H.264/AVC and HEVC, when combined with preprocessing techniques, resulted in good percent root-mean-square difference [Formula: see text] compression factor figures, for low and high compression factors, respectively. Besides, regarding isometric signals, the modified two-dimensional MMP algorithm outperformed state-of-the-art schemes, for low compression factors, the combination between SbS and HEVC proved to be competitive, for high compression factors, and JPEG2000, combined with PDS, provided good performance allied to low computational complexity, all in terms of percent root-mean-square difference [Formula: see text] compression factor. The proposed schemes are effective and, specifically, the modified MMP algorithm can be considered as an interesting alternative for isometric signals, regarding traditional SEMG encoders. Besides, the approach based on off-the-shelf image encoders has the potential of fast implementation and dissemination, given that many embedded systems may already have such encoders available, in the underlying hardware/software architecture.

Post-Hurricane Ike coastal oblique aerial photographs collected along the Alabama, Mississippi, and Louisiana barrier islands and the north Texas coast, September 14-15, 2008

USGS Publications Warehouse

Morgan, Karen L. M.; Krohn, M. Dennis; Guy, Kristy K.

2016-04-28

The U.S. Geological Survey (USGS), as part of the National Assessment of Coastal Change Hazards project, conducts baseline and storm-response photography missions to document and understand the changes in vulnerability of the Nation's coasts to extreme storms (Morgan, 2009). On September 14-15, 2008, the USGS conducted an oblique aerial photographic survey along the Alabama, Mississippi, and Louisiana barrier islands and the north Texas coast, aboard a Beechcraft Super King Air 200 (aircraft) at an altitude of 500 feet (ft) and approximately 1,200 ft offshore. This mission was flown to collect post-Hurricane Ike data for assessing incremental changes in the beach and nearshore area since the last survey, flown on September 9-10, 2008, and the data can be used in the assessment of future coastal change.The photographs provided in this report are Joint Photographic Experts Group (JPEG) images. ExifTool was used to add the following to the header of each photo: time of collection, Global Positioning System (GPS) latitude, GPS longitude, keywords, credit, artist (photographer), caption, copyright, and contact information. The photograph locations are an estimate of the position of the aircraft at the time the photograph was taken and do not indicate the location of any feature in the images (see the Navigation Data page). These photographs document the state of the barrier islands and other coastal features at the time of the survey. Pages containing thumbnail images of the photographs, referred to as contact sheets, were created in 5-minute segments of flight time. These segments can be found on the Photos and Maps page. Photographs can be opened directly with any JPEG-compatible image viewer by clicking on a thumbnail on the contact sheet.In addition to the photographs, a Google Earth Keyhole Markup Language (KML) file is provided and can be used to view the images by clicking on the marker and then clicking on either the thumbnail or the link above the thumbnail. The KML file was created using the photographic navigation files. The KML file can be found in the kml folder.

Photogrammetric Processing of IceBridge DMS Imagery into High-Resolution Digital Surface Models (DEM and Visible Overlay)

NASA Astrophysics Data System (ADS)

Arvesen, J. C.; Dotson, R. C.

2014-12-01

The DMS (Digital Mapping System) has been a sensor component of all DC-8 and P-3 IceBridge flights since 2009 and has acquired over 3 million JPEG images over Arctic and Antarctic land and sea ice. The DMS imagery is primarily used for identifying and locating open leads for LiDAR sea-ice freeboard measurements and documenting snow and ice surface conditions. The DMS is a COTS Canon SLR camera utilizing a 28mm focal length lens, resulting in a 10cm GSD and swath of ~400 meters from a nominal flight altitude of 500 meters. Exterior orientation is provided by an Applanix IMU/GPS which records a TTL pulse coincident with image acquisition. Notable for virtually all IceBridge flights is that parallel grids are not flown and thus there is no ability to photogrammetrically tie any imagery to adjacent flight lines. Approximately 800,000 Level-3 DMS Surface Model data products have been delivered to NSIDC, each consisting of a Digital Elevation Model (GeoTIFF DEM) and a co-registered Visible Overlay (GeoJPEG). Absolute elevation accuracy for each individual Elevation Model is adjusted to concurrent Airborne Topographic Mapper (ATM) Lidar data, resulting in higher elevation accuracy than can be achieved by photogrammetry alone. The adjustment methodology forces a zero mean difference to the corresponding ATM point cloud integrated over each DMS frame. Statistics are calculated for each DMS Elevation Model frame and show RMS differences are within +/- 10 cm with respect to the ATM point cloud. The DMS Surface Model possesses similar elevation accuracy to the ATM point cloud, but with the following advantages: · Higher and uniform spatial resolution: 40 cm GSD · 45% wider swath: 435 meters vs. 300 meters at 500 meter flight altitude · Visible RGB co-registered overlay at 10 cm GSD · Enhanced visualization through 3-dimensional virtual reality (i.e. video fly-through) Examples will be presented of the utility of these advantages and a novel use of a cell phone camera for aerial photogrammetry will also be presented.

No-reference quality assessment based on visual perception

NASA Astrophysics Data System (ADS)

Li, Junshan; Yang, Yawei; Hu, Shuangyan; Zhang, Jiao

2014-11-01

The visual quality assessment of images/videos is an ongoing hot research topic, which has become more and more important for numerous image and video processing applications with the rapid development of digital imaging and communication technologies. The goal of image quality assessment (IQA) algorithms is to automatically assess the quality of images/videos in agreement with human quality judgments. Up to now, two kinds of models have been used for IQA, namely full-reference (FR) and no-reference (NR) models. For FR models, IQA algorithms interpret image quality as fidelity or similarity with a perfect image in some perceptual space. However, the reference image is not available in many practical applications, and a NR IQA approach is desired. Considering natural vision as optimized by the millions of years of evolutionary pressure, many methods attempt to achieve consistency in quality prediction by modeling salient physiological and psychological features of the human visual system (HVS). To reach this goal, researchers try to simulate HVS with image sparsity coding and supervised machine learning, which are two main features of HVS. A typical HVS captures the scenes by sparsity coding, and uses experienced knowledge to apperceive objects. In this paper, we propose a novel IQA approach based on visual perception. Firstly, a standard model of HVS is studied and analyzed, and the sparse representation of image is accomplished with the model; and then, the mapping correlation between sparse codes and subjective quality scores is trained with the regression technique of least squaresupport vector machine (LS-SVM), which gains the regressor that can predict the image quality; the visual metric of image is predicted with the trained regressor at last. We validate the performance of proposed approach on Laboratory for Image and Video Engineering (LIVE) database, the specific contents of the type of distortions present in the database are: 227 images of JPEG2000, 233 images of JPEG, 174 images of White Noise, 174 images of Gaussian Blur, 174 images of Fast Fading. The database includes subjective differential mean opinion score (DMOS) for each image. The experimental results show that the proposed approach not only can assess many kinds of distorted images quality, but also exhibits a superior accuracy and monotonicity.

Post-Hurricane Isaac coastal oblique aerial photographs collected along the Alabama, Mississippi, and Louisiana barrier islands, September 2–3, 2012

USGS Publications Warehouse

Morgan, Karen L. M.; Karen A. Westphal,

2016-04-21

The U.S. Geological Survey (USGS), as part of the National Assessment of Coastal Change Hazards project, conducts baseline and storm-response photography missions to document and understand the changes in vulnerability of the Nation's coasts to extreme storms (Morgan, 2009). On September 2-3, 2012, the USGS conducted an oblique aerial photographic survey along the Alabama, Mississippi, and Louisiana barrier islands aboard a Cessna 172 (aircraft) at an altitude of 500 feet (ft) and approximately 1,000 ft offshore. This mission was flown to collect post-Hurricane Isaac data for assessing incremental changes in the beach and nearshore area since the last survey, flown in September 2008 (central Louisiana barrier islands) and June 2011 (Dauphin Island, Alabama, to Breton Island, Louisiana), and the data can be used in the assessment of future coastal change.The photographs provided in this report are Joint Photographic Experts Group (JPEG) images. ExifTool was used to add the following to the header of each photo: time of collection, Global Positioning System (GPS) latitude, GPS longitude, keywords, credit, artist (photographer), caption, copyright, and contact information. The photograph locations are an estimate of the position of the aircraft at the time the photograph was taken and do not indicate the location of any feature in the images (see the Navigation Data page). These photographs document the state of the barrier islands and other coastal features at the time of the survey. Pages containing thumbnail images of the photographs, referred to as contact sheets, were created in 5-minute segments of flight time. These segments can be found on the Photos and Maps page. Photographs can be opened directly with any JPEG-compatible image viewer by clicking on a thumbnail on the contact sheet.In addition to the photographs, a Google Earth Keyhole Markup Language (KML) file is provided and can be used to view the images by clicking on the marker and then clicking on either the thumbnail or the link above the thumbnail. The KML files were created using the photographic navigation files. These KML file(s) can be found in the kml folder.

The Eagle's EGGs

NASA Astrophysics Data System (ADS)

2001-12-01

VLT ISAAC Looks for Young Stars in the Famous "Pillars of Creation" Summary Through imaging at infrared wavelengths, evidence has been found for recent star formation in the so-called "Pillars of Creation" in the Eagle Nebula (also known as Messier 16 ), made famous when the NASA/ESA Hubble Space Telescope (HST) obtained spectacular visible-wavelength images of this object in 1995. Those huge pillars of gas and dust are being sculpted and illuminated by bright and powerful high-mass stars in the nearby NGC 6611 young stellar cluster . The Hubble astronomers suggested that perhaps even younger stars were forming inside. Using the ISAAC instrument on the VLT 8.2-m ANTU telescope at the ESO Paranal Observatory , European astronomers have now made a wide-field infrared image of the Messier 16 region with excellent spatial resolution, enabling them to penetrate the obscuring dust and search for light from newly born stars . Two of the three pillars are seen to have very young, relatively massive stars in their tips. Another dozen or so lower-mass stars seem to be associated with the small "evaporating gaseous globules (EGGs)" that the Hubble astronomers had discovered scattered over the surface of the pillars. These findings bring new evidence to several key questions about how stars are born . Was the formation of these new stars triggered as the intense ultraviolet radiation from the NGC 6611 stars swept over the pillars, or were they already there? Will the new stars be prematurely cut off from surrounding gas cloud, thus stunting their growth? If the new stars have disks of gas and dust around them, will they be destroyed before they have time to form planetary systems? PR Photo 37a/01 : Full wide-field ISAAC image of the Eagle Nebula. PR Photo 37b/01 : Close-up view of the ISAAC image , showing the famous "Pillars of Creation". PR Photo 37c/01 : Enlargement of the head of Column 1 . PR Photo 37d/01 : Enlargement of the head of Column 2 . PR Photo 37e/01 : Enlargement of the head of Column 4 . PR Video Clip 08a/01 : A "dissolve" between the Hubble visible wavelength and VLT infrared views of the pillars. PR Video Clip 08b/01 : Hubble and VLT views of the head of Column 1 . The famous "Pillars of Creation" Hundreds of millions of people all over the world have admired those towering "Pillars of Creation" in Messier 16 (M16) , also known as the Eagle Nebula , and located in the southern constellation of Serpens. It is one of the most famous NASA/ESA Hubble Space Telescope (HST) images - released in 1995, it has become an icon of modern astronomy, giving the viewer an extraordinary three-dimensional impression of scuba-diving through some leviathan undersea forest. These light-years long columns of gas and dust are being simultaneously sculpted, illuminated, and destroyed by the intense ultraviolet light from massive stars in the adjacent NGC 6611 young stellar cluster . Within a few million years, a mere twinkling of the universal eye, they will be gone forever. But before they are, they have a chance to leave a longer-lasting legacy: a whole new generation of stars may be forming within them. Their formation may have been triggered by the immense power of the NGC 6611 stars, or perhaps they had already started to form quietly earlier on, only to be suddenly subjected to the ravages of an ionising storm front. The real question is then: are there or are there not any new born stars inside those "Pillars of Creation"? The Hubble Space Telescope view When the HST turned to photograph M16 in 1995, it did so using its visible wavelength camera, WFPC-2 . The Hubble astronomers [1] took data through three narrow-bandpass optical filters selecting emission lines from the ionised gas they knew to be present in the region. In doing so, they obtained an extraordinarily sharp view of the well-known pillars of cold gas and dust that are sometimes referred to as "elephant trunks" for obvious reasons. Their image showed the light-years long pillars partly silhouetted against a bright nebular background, and revealed in exquisite detail the surface structure of the pillars as they are being transformed by ultraviolet radiation from massive, hot stars in the NGC 6611 cluster which lies just outside the area covered by the Hubble image. A surprising finding made by the Hubble astronomers was that the pillars are covered with a large number (they counted 73) of small bumps and protrusions which in a few cases are almost completely detached from the pillars. With a typical angular size of only 0.5 arcsec, those objects had not been seen in previous ground-based photographs, and it took the exceptional acuity of Hubble to reveal them. The astronomers dubbed these objects "evaporating gaseous globules" , shortened to "EGGs" . They noted that one or two of these EGGs appeared to have stars right at their tips, and they suggested that perhaps the EGGs are formed as the advancing front of ionised gas driven by the hot NGC 6611 stars is slowed down by the presence of dense knots of gas and dust within the larger pillars. Within those knots then, they hypothesised a population of extremely young stars, still in the womb of their natal cloud but soon to be rudely exposed to a much harsher outside world. However, there was a problem: since their images were taken at visible wavelengths which are relatively easily absorbed by the dust in the EGGs, the Hubble astronomers could not actually see inside the EGGs to test their theory. The VLT looks inside the "Pillars" What was needed then was a survey of the M16 region made at longer wavelengths and penetrating much more deeply through the dense dust. Such a survey should be sensitive enough to detect faint, low-mass young stars deeply embedded in the dusty EGGs. It should have excellent sub-arcsec angular resolution to unambiguously identify an object with a given EGG. And it should cover a wide field-of-view to probe all of the pillars and their surroundings. Over the past twenty years, a number of surveys of M16 have been made at near-infrared, mid-infrared, and millimetre wavelengths. Unfortunately, none of them had this perfect combination of characteristics to answer the crucial question of whether or not there is a population of young stars inside the Eagle's EGGs . However, this past austral autumn (April and May 2001), European astronomers [2] were able to image the Eagle Nebula at near-infrared wavelengths , using the infrared multi-mode ISAAC instrument on the 8.2-m VLT ANTU telescope at ESO's Paranal Observatory in Chile. By specifying that the observations be carried out in so-called "service mode", they ensured that the on-site ESO team could undertake their pre-defined programme under the necessary excellent observing conditions. The results were well worth the effort! The ISAAC near-infrared images cover a 9 x 9 arcmin region, i.e., fourteen times the area seen in the famous Hubble visible image, in three broad-band colours and with sufficient sensitivity to detect young stars of all masses and - most importantly - with an image sharpness as good as 0.35 arcsec. Although this is still some way from the diffraction-limited performance of 0.07 arcsec or better that is now achieved with the adaptive optics system NAOS/CONICA on the VLT telescope (cf. ESO PR 25/01 ), the ISAAC data cover a much wider field-of-view and, vitally, with enough image resolution to probe deep into the individual EGGs . The ISAAC infrared images of Messier 16 ESO PR Photo 37a/01 ESO PR Photo 37a/01 [Preview - JPEG: 400 x 471 pix - 136k] [Normal - JPEG: 800 x 942 pix - 1.2M] [HiRes - JPEG: 3000 x 3532 pix - 12.9M] Caption : ESO PR Photo 37a/01 is a three-colour composite mosaic image of the Eagle Nebula (Messier 16) , based on 144 individual images obtained with the infrared multi-mode instrument ISAAC on the ESO Very Large Telescope (VLT) at the Paranal Observatory. At the centre, the so-called "Pillars of Creation" can be seen. This wide-field infrared image shows not only the central three pillars but also several others in the same star-forming region, as well as a huge number of stars in front of, in, or behind the Eagle Nebula. The cluster of bright blue stars to the upper right is NGC 6611 , home to the massive and hot stars that illuminate the pillars. Technical information about this photo is available below. ESO PR Photo 37b/01 ESO PR Photo 37b/01 [Preview - JPEG: 400 x 553 pix - 160k] [Normal - JPEG: 800 x 1105 pix - 1.2M] [FullRes - JPEG: 1330 x 1837 pix - 2.7M] Caption : ESO PR Photo 37b/01 shows a zoom into the centre of PR Photo 37a/01 , with the infrared view of the columns and their immediate surroundings in more detail. The pillars or columns are numbered 1 to 3 from left to right (east to west). The pillars themselves are less prominent than on the Hubble visible-light image of this region - this because near-infrared light penetrates the thinner parts of the gas and dust clouds and only the heads remain opaque. A number of red objects can be seen associated with the pillars: some of these are just background sources seen through the dust, but some are probably real young stars embedded in the pillars. The purple arc near the bottom of the picture is Herbig-Haro object 216 , a fast-moving clump of heated gas emanating from a young star (see also PR Photo 37e/01 ). Technical information about this photo is available below. HST and VLT images of the Eagle Nebula - PR Video Clip 08a/01] ESO PR Video Clip 08a/01 HST and VLT images of the Eagle Nebula (52 frames/0:02 min) [MPEG Video; 160x120 pix; 3.6Mb] ESO Video Clip 08a/01 shows a sky field similar to that seen in PR Photo 37b/01 , "dissolving" back and forth between the Hubble and VLT views, demonstrating the dramatic changes that occur when changing wavelength from the visible to near-infrared. (It is suggested to play it at reduced speed). The wide-field view of M16 ( Photo 37a/01 ) shows that there is much more to the region than is seen in the Hubble image. The first impression one gets is of an enormous number of stars. Those which are blue in the infrared image are either members of the young NGC 6611 cluster - whose massive stars are concentrated in the upper right (north west) part of the field - or foreground stars which happen to lie along the line of sight towards M16. Most of the stars are fainter and more yellow. They are ordinary stars behind M16, along the line of sight through the galactic bulge, and are seen through the molecular clouds out of which NGC 6611 formed. Some very red stars are also seen: these are either very young and embedded in gas and dust clouds, or just brighter stars in the background shining through them. Zooming in, Photo 37b/01 shows the region of the pillars covered by the Hubble image and its immediate surroundings. The pillars are still obvious, although appearing less prominent in places as one penetrates the thinner parts, getting closer to the goal of probing inside the pillars. Video Clip 08a/01 shows how this appearance changes in a continuous dissolve between the Hubble visible wavelength view and its VLT infrared equivalent. Hunting for new stars in the EGGs ESO PR Photo 37c/01 ESO PR Photo 37c/01 [Preview - JPEG: 400 x 371 pix - 66k] [Normal - JPEG: 800 x 741 pix - 352k] Caption : ESO PR Photo 37c/01 shows an enlarged view of the head of the largest of the three main pillars, Column 1. The head is almost transparent around the edges at near-infrared wavelengths, but there is still a substantial opaque core which even these near-infrared VLT observations cannot penetrate. The complex blueish nebulosity bisected by a dark lane near the tip is being lit up by the bright yellow star just below it, which appears to be very young and rather massive. Several of the much fainter stars to the right of and below this source are found to be associated with EGGs seen in the Hubble image, and these all have much lower masses. Finally, there is a faint streak of blue light emanating from from the tip of EGG 23, one of the darkest parts of Column 1, ending in a blue blob further north. An equal distance to the south of the EGG and off the head, there is another curving blue nebulosity. These features are also seen in the Hubble image, and may be part of a Herbig-Haro jet coming from a young star buried deeply in EGG 23 and invisible in this image. Technical information about this photo is available below. ESO PR Photo 37d/01 ESO PR Photo 37d/01 [Preview - JPEG: 400 x 362 pix - 75k] [Normal - JPEG: 800 x 724 pix - 372k] Caption : ESO PR Photo 37d/01 shows a similarly enlarged view of the head of Column 2. The bright blue-yellow source embedded in nebulosity near the tip is another young star unseen in the Hubble images: although it appears to be double here, it is in fact just one relatively massive young star surrounding by nebulosity. Technical information about this photo is available below. ESO PR Photo 37e/01 ESO PR Photo 37e/01 [Preview - JPEG: 400 x 365 pix - 112k] [Normal - JPEG: 800 x 729 pix - 536k] Caption : ESO PR Photo 37e/01 shows an enlarged view of the head of Column 4, which lies to the lower-left in Photo 37a/01 and was not covered in the Hubble image. This column is similar to the more familiar ones, but thus far less impacted by the massive stars in NGC6611. The two red nebulosities in the head signpost one or more young stars so deeply embedded that they cannot be seen directly in the VLT infrared image, only indirectly as they illuminate dust around them. One of these sources is thought to be the origin of the Herbig-Haro object HH216 seen in Photo 37a/01 and Photo 37b/01 [3]. Technical information about this photo is available below. Pillars of Creation in Eagle Nebula (Column 1) - PR Video Clip 08b/01] ESO PR Video Clip 08b/01 Pillars of Creation in Eagle Nebula (Column 1) (800 frames/0:32 min) [MPEG Video+Audio; 192x144 pix; 4.0M] [MPEG Video+Audio; 384x288 pix; 9.8M] [RealMedia; streaming; 56kps] [RealMedia; streaming; 200kps] ESO PR Video Clip 08b/01 shows the Hubble and VLT views of the head of Column 1 (cf. Photo 37c/01 ), with an additional zoom-in. Note that the bright complex reflection nebulosity and its young, massive energy source are completely unseen at visible wavelengths. Photos 37c-e/01 show even further close-ups of the heads of Columns 1 and 2, plus Column 4, seen in the wide-field ISAAC image ( Photo 37a/01 ) towards the lower left (south east). The young star in the head of Column 1 ( Photo 37c/01 ) is located within a complex reflection nebula, completely unseen at visible wavelengths. From the near-infrared brightness of the star, the astronomers judge it to be more massive than our own sun and very young (in astronomical terms), perhaps only 100,000 years old. Video Clip 08b/01 allows a direct comparison between the Hubble and VLT views of this region. Right at the tip of Column 2 ( Photo 37d/01 ), another young star also illuminates a small reflection nebula, again undetected in the Hubble image. And to the south-east, the head of Column 4 ( Photo 37e/01 ) shows complex red nebulosity which the astronomers take to be the signpost of very young objects, so deeply embedded that they are not directly detected in the VLT images. The present team of astronomers has recently investigated this object [3] and believe it is hiding the driving source of a so-called "Herbig-Haro jet", a speedy outflow of gas that can be seen where it ends in a shock, the bright purple arc at the lower edge of Photo 37b/01 . Turning to smaller scales, the astronomers made a very accurate alignment of the Hubble and VLT images, and then examined the location of each EGG, searching for stars within them. This search had to be carried out very carefully, given the small sizes of the EGGs, and also because, once in a while, a perfectly ordinary background star might seem to be aligned with an EGG purely by chance. After completing their search, they found that 11 of the 73 EGGs clearly have stars associated with them. Only one of these had been previously been seen in the Hubble images, and another five EGGs were noted as possibly containing stars. Judging from their near-infrared brightness, most of these stars seem to be less massive than our Sun. Interestingly, most of the EGGs with stars are located on Column 1, and roughly half of them right at the tip of the head, not far from the more massive star that illuminates the reflection nebula. This may be evidence for a small cluster of young stars associated with Column 1 which will soon be revealed as the column is eaten away. Even though the remaining 57 EGGs appear to be empty, it is important to note that there may nevertheless be more young stars in the M16 pillars. After all, neither of the bright young stars at the tips of Columns 1 and 2 are related to any of the Hubble EGGs. Also, it is clear from the VLT image that parts of the pillars and a few of the EGGs are so dense that they remain completely opaque even at near-infrared wavelengths, and may still be harbouring other new stars. An interesting example is the apparently empty EGG number 23, from which another high-speed Herbig-Haro jet seems to be emerging ( Photo 37c/01 ). Outlook The new VLT infrared image shows that there is now firm evidence for the recent birth of stars in the Eagle Nebula and that at least some of the Eagle's EGGs are fertile, not sterile! A deeper look at even longer wavelengths will be needed to make a complete census of all the star formation in the Eagle Nebula, perhaps using the VLT thermal-infrared camera, VISIR , when it becomes available or, ultimately, less than a decade from now, the infrared-optimised Next Generation Space Telescope (NGST) , the NASA/ESA/CSA successor to the HST. At longer wavelengths, observations with the planned Atacama Large Millimeter Array (ALMA) will also be most useful. From images alone, however, it is not possible to tell which came first: the stars or the EGGs? Were those young stars already forming inside dark clouds before the intense ultraviolet radiation of the nearby massive hot stars swept over the pillars? Or did that radiation compress empty clumps in those clouds and trigger the birth of the stars? In either case, those young stars will soon be exposed to the full fury of the ionisation storm as the columns are evaporated. How will their fate have been affected? Ripped prematurely from the cloud, they will be cut off from the reservoir of material from which they grew, and thus may end up smaller than would otherwise be expected. Also, the dense disks of gas and dust known to girdle young stars will suddenly be heated and boiled away by the ultraviolet radiation, as has been seen happening in the Orion Nebula, perhaps preventing the formation of planets around those stars. Theoreticians studying these problems now have some new data to work with. Nevertheless, to keep things in perspective, it is important to remember that the towering pillars cover only a small fraction of the Eagle Nebula. While a few tens of new stars may be forming in the pillars today, at least a thousand young stars were born in the adjacent NGC 6611 cluster within the last few million years, including the massive stars themselves. The story of the formation of that cluster may be something else altogether, but perhaps just as spectacular. More information The research described in this press release is presented in more detail in a research paper ("The Eagle's EGGs: fertile or sterile?"), to be submitted to the European research journal "Astronomy & Astrophysics Letters". The work has been carried under the auspices of the European Commission Research Training Network "The Formation and Evolution of Young Stellar Clusters" (HPRN-CT-2000-00155) [4]. Notes [1] The Hubble Space Telescope team consisted of Jeff Hester and Paul Scowen (Arizona State University, USA) and 21 collaborators. Their M16 image was made at visible wavelengths using the Wide-Field Planetary Camera 2 (WFPC-2) instrument of the HST, selecting the emission lines of double ionised oxygen [OIII], the hydrogen line H-alpha, and single ionised sulphur [SII] in the visible wavelength interval (from 500 to 671 nm). The image was released by the Space Telescope Science Institute (PR95-44) in 1995 and the scientific data analysis was published by Jeff Hester et al. in the Astronomical Journal in 1996 (Vol. 111, p. 2349). [2] The present team consists of Mark McCaughrean and Morten Andersen , both of the Astrophysical Institute Potsdam (AIP), Germany. [3] A research paper discussing the embedded object in the head of Column 4 and its role in driving the Herbig-Haro jet ending in HH 216 ("Molecular cloud structure and star formation near HH216 in M16", by Morten Andersen, Jens Knude, Bo Reipurth, Alain Castets, Lars-Åke Nyman, Mark McCaughrean and Steve Heathcote) has been submitted for publication in the European research journal "Astronomy & Astrophysics". [4]: Mark McCaughrean would like to dedicate these VLT images of the Eagle Nebula to his own new baby star, Finn, born in Berlin on December 1st, 2001, when his father was working on them and also to Sybille and Catriona, the other stars in his family cluster! Technical information about the photos PR Photo 37a/01 of the Eagle Nebula, M16, and NGC 6611 was made using the near-infrared camera ISAAC on the ESO 8.2-m VLT ANTU telescope on April 8 and May 8 - 10, 2001. The full field measures approximately 9.1 x 9.1 arcmin, covering roughly 17 x 17 light-years (5.3 x 5.3 pc) at the distance to the region (about 6500 light-years or 2 kpc). This required a 16-position mosaic (4 x 4 grid) of ISAAC pointings: at each pointing, a series of images were taken in each of the near-infrared J s - (centred at 1.24 µm wavelength), H- (1.65µm), and K s - (2.16 µm) bands. North is up and East left in this and all subsequent images. The total integration time for each pixel in the mosaic was 1200, 300, and 300 seconds in the central 4.5 x 4.5 arcmin region, and 200, 50, and 50 seconds in the outer part, in J s -, H-, and K s - bands, respectively. The seeing FWHM (full width at half maximum) was excellent, at 0.38, 0.36, and 0.33 arcsec in J s , H, and K s , respectively. Point sources are detected in the central region at the 3-sigma level (brightest pixel above background noise) at 22.6, 21.3, and 20.4 magnitudes in J s , H, and K s , respectively. These limits imply that a 1 million year old, 0.075 solar-mass object on the star/brown dwarf boundary could be detected in M16 through roughly 15, 20, and 30 magnitudes of visual extinction at J s , H, and K s , respectively. After removal of instrumental signatures and the bright infrared sky background, all frames in a given band were carefully aligned and adjusted to form a seamless mosaic. The three monochromatic mosaics were then scaled to the cube root of their intensities to reduce the enormous dynamic range and enhance faint nebular features. The mosaics were then combined to create the colour-coded image, with the J s -band being rendered as blue, the H-band as green, and the K s -band as red. A total of 144 individual 1024 x 1024 pixel ISAAC images were merged to form this mosaic. PR Photo 37b/01 shows an enlarged section of the full mosaic covering 6.2 x 7.5 light-years (1.9 x 2.3 pc) centred on the pillars. PR Photos 37c-e/01 show smaller, enlarged sections covering the head of each of Columns 1, 2, and 4, respectively. In each case, the region shown measures 1.9 x 2.8 light-years (0.6 x 0.9 pc). The intensity scalings have been adjusted to better show the young stars embedded in the head of each column.

78 FR 67076 - Practices and Procedures

Federal Register 2010, 2011, 2012, 2013, 2014

2013-11-08

... as an attachment in any common electronic format, including word processing applications, HTML and PDF. If possible, commenters are asked to use a text format and not an image format for attachments...

Possible significance of cubic water-ice, H2O-Ic, in the atmospheric water cycle of Mars

NASA Technical Reports Server (NTRS)

Gooding, James L.

1988-01-01

The possible formation and potential significance of the cubic ice polymorph on Mars is discussed. When water-ice crystallizes on Earth, the ambient conditions of temperature and pressure result in the formation of the hexagonal ice polymorph; however, on Mars, the much lower termperature and pressures may permit the crystallization of the cubic polymorph. Cubic ice has two properties of possible importance on Mars: it is an excellant nucleator of other volatiles (such as CO2), and it undergoes an exothermic transition to hexagonal ice at temperatures above 170 K. These properties may have significant implications for both martian cloud formation and the development of the seasonal polar caps.

14 CFR 331.23 - In what format must applications be submitted?

Code of Federal Regulations, 2010 CFR

2010-01-01

... 14 Aeronautics and Space 4 2010-01-01 2010-01-01 false In what format must applications be... SERVICE PROVIDERS IN THE WASHINGTON, DC AREA Application Procedures § 331.23 In what format must... hardcopy format and, if possible, in electronic format. The Department has made available an electronic...

The Formation of Formaldehyde on Interstellar Carbonaceous Grain Analogs by O/H Atom Addition

DOE Office of Scientific and Technical Information (OSTI.GOV)

Potapov, Alexey; Jäger, Cornelia; Henning, Thomas

An understanding of possible scenarios for the formation of astrophysically relevant molecules, particularly complex organic molecules, will bring us one step closer to the understanding of our astrochemical heritage. In this context, formaldehyde is an important molecule as a precursor of methanol, which in turn is a starting point for the formation of more complex organic species. In the present experiments, for the first time, following the synthesis of CO, formaldehyde has been produced on the surface of interstellar grain analogs, hydrogenated fullerene-like carbon grains, by O and H atom bombardment. The formation of H{sub 2}CO is an indication formore » a possible methanol formation route in such systems.« less

Modeling of Hydrate Formation Mode in Raw Natural Gas Air Coolers

NASA Astrophysics Data System (ADS)

Scherbinin, S. V.; Prakhova, M. Yu; Krasnov, A. N.; Khoroshavina, E. A.

2018-05-01

Air cooling units (ACU) are used at all the gas fields for cooling natural gas after compressing. When using ACUs on raw (wet) gas in a low temperature condition, there is a danger of hydrate plug formation in the heat exchanging tubes of the ACU. To predict possible hydrate formation, a mathematical model of the air cooler thermal behavior used in the control system shall adequately calculate not only gas temperature at the cooler's outlet, but also a dew point value, a temperature at which condensation, as well as the gas hydrate formation point, onsets. This paper proposes a mathematical model allowing one to determine the pressure in the air cooler which makes hydrate formation for a given gas composition possible.

Nucleic acids, proteins, and chirality

NASA Technical Reports Server (NTRS)

Usher, D. A.; Profy, A. T.; Walstrum, S. A.; Needels, M. C.; Bulack, S. C.; Lo, K. M.

1984-01-01

The present investigation is concerned with experimental results related, in one case, to the chirality of nucleotides, and, in another case, to the possibility of a link between the chirality of nucleic acids, and that of peptides. It has been found that aminoacylation of the 'internal' hydroxyl group of a dinucleoside monophosphate can occur stereoselectively. However, this reaction has not yet been made a part of a working peptide synthesis scheme. The formation and cleavage of oligonucleotides is considered. In the event of the formation of a helical complex between the oligonucleotide and the polymer, 1-prime,5-prime-bonds in the oligomer are found to become more resistant towards cleavage. The conditions required for peptide bond formation are examined, taking into account the known structures of RNA and possible mechanisms for prebiotic peptide bond formation. The possibility is considered that the 2-prime,5-prime-internucleotide linkage could have played an important part in the early days of biological peptide synthesis.

Astronomical database and VO-tools of Nikolaev Astronomical Observatory

NASA Astrophysics Data System (ADS)

Mazhaev, A. E.; Protsyuk, Yu. I.

2010-05-01

Results of work in 2006-2009 on creation of astronomical databases aiming at development of Nikolaev Virtual Observatory (NVO) are presented in this abstract. Results of observations and theirreduction, which were obtained during the whole history of Nikolaev Astronomical Observatory (NAO), are included in the databases. The databases may be considered as a basis for construction of a data centre. Images of different regions of the celestial sphere have been stored in NAO since 1929. About 8000 photo plates were obtained during observations in the 20th century. Observations with CCD have been started since 1996. Annually, telescopes of NAO, using CCD cameras, create data volume of several tens of gigabytes (GB) in the form of CCD images and up to 100 GB of video records. At the end of 2008, the volume of accumulated data in the form of CCD images was about 300 GB. Problems of data volume growth are common in astronomy, nuclear physics and bioinformatics. Therefore, the astronomical community needs to use archives, databases and distributed grid computing to cope with this problem in astronomy. The International Virtual Observatory Alliance (IVOA) was formed in June 2002 with a mission to "enable the international utilization of astronomical archives..." The NVO was created at the NAO website in 2008, and consists of three main parts. The first part contains 27 astrometric stellar catalogues with short descriptions. The files of catalogues were compiled in the standard VOTable format using eXtensible Markup Language (XML), and they are available for downloading. This is an example of the so-called science-ready product. The VOTable format was developed by the International Virtual Observatory Alliance (IVOA) for exchange of tabular data. A user may download these catalogues and open them using any standalone application that supports standards of the IVOA. There are several directions of development for such applications, for example, search of catalogues and images, search and visualisation of spectra, spectral energy distribution (SED) building, search of cross-correlation between objects in different catalogues, statistical data processing of large data volumes etc. The second part includes database of observations, accumulated in NAO, with access via a browser. The database has a common interface for searching of textual and graphical information concerning photographic and CCD observations. The database contains: textual information about 7437 plates as well as 2700 preview images in JPEG format with resolution of 300 DPI (dots per inch); textual information about 16660 CCD frames as well as 1100 preview images in JPEG format. Absent preview images will be added to the database as soon as they will be ready after plates scanning and CCD frames processing. The user has to define the equatorial coordinates of search centre, a search radius and a period of observations. Then he or she may also specify additional filters, such as: any combination of objects given separately for plates and CCD frames, output parameters for plates, telescope names for CCD observations. Results of search are generated in the form of two tables for photographic and CCD observations. To obtain access to the source images in FITS format with support of World Coordinate System (WCS), the user has to fill and submit electronic form given after the tables. The third part includes database of observations with access via a standalone application such as Aladin, which has been developed by Strasbourg Astronomical Data Centre. To obtain access to the database, the user has to perform a series of simple actions, which are described on a corresponding site page. Then he or she may get access to the database via a server selector of Aladin, which has a menu with wide range of image and catalogue servers located world wide, including two menu items for photographic and CCD observations of a NVO image server. The user has to define the equatorial coordinates of search centre and a search radius. The search results are outputted into a main window of Aladin in textual and graphical forms using XML and Simple Object Access Protocol (SOAP). In this way, the NVO image server is integrated with other astronomical servers, using a special configuration file. The user may conveniently request information from many servers using the same server selector of Aladin, although the servers are located in different countries. Aladin has a wide range of special tools for data analysis and handling, including connection with other standalone applications. As a conclusion, we should note that a research team of a data centre, which provides the infrastructure for data output to the internet, is responsible for creation of corresponding archives. Therefore, each observatory or data centre has to provide an access to its archives in accordance with the IVOA standards and a resolution adopted by the IAU XXV General Assembly #B.1, titled: Public Access to Astronomical Archives. A research team of NAO copes successfully with this task and continues to develop the NVO. Using our databases and VO-tools, we also take part in development of the Ukrainian Virtual Observatory (UkrVO). All three main parts of the NVO are used as prototypes for the UkrVO. Informational resources provided by other astronomical institutions from Ukraine will be included in corresponding databases and VO interfaces.

VLT Smashes the Record of the Farthest Known Galaxy

NASA Astrophysics Data System (ADS)

2004-03-01

Redshift 10 Galaxy discovered at the Edge of the Dark Ages [1] Summary Using the ISAAC near-infrared instrument on ESO's Very Large Telescope, and the magnification effect of a gravitational lens, a team of French and Swiss astronomers [2] has found several faint galaxies believed to be the most remote known. Further spectroscopic studies of one of these candidates has provided a strong case for what is now the new record holder - and by far - of the most distant galaxy known in the Universe. Named Abell 1835 IR1916, the newly discovered galaxy has a redshift of 10 [3] and is located about 13,230 million light-years away. It is therefore seen at a time when the Universe was merely 470 million years young, that is, barely 3 percent of its current age. This primeval galaxy appears to be ten thousand times less massive than our Galaxy, the Milky Way. It might well be among the first class of objects which put an end to the Dark Ages of the Universe. This remarkable discovery illustrates the potential of large ground-based telescopes in the near-infrared domain for the exploration of the very early Universe. PR Photo 05a/04: Abell 1835 IR1916 - the Farthest Galaxy - Seen in the Near-Infrared PR Photo 05b/04: Two-dimensional Spectra of Abell 1835 IR1916 Digging into the past Like palaeontologists who dig deeper and deeper to find the oldest remains, astronomers try to look further and further to scrutinise the very young Universe. The ultimate quest? Finding the first stars and galaxies that formed just after the Big Bang. More precisely, astronomers are trying to explore the last "unknown territories", the boundary between the "Dark Ages" and the "Cosmic Renaissance". Rather shortly after the Big Bang, which is now believed to have taken place some 13,700 million years ago, the Universe plunged into darkness. The relic radiation from the primordial fireball had been stretched by the cosmic expansion towards longer wavelengths and neither stars nor quasars had yet been formed which could illuminate the vast space. The Universe was a cold and opaque place. This sombre era is therefore quite reasonably dubbed the "Dark Ages". A few hundred million years later, the first generation of stars and, later still, the first galaxies and quasars, produced intense ultraviolet radiation, gradually lifting the fog over the Universe. This was the end of the Dark Ages and, with a term again taken over from human history, is sometimes referred to as the "Cosmic Renaissance". Astronomers are trying to pin down when - and how - exactly the Dark Ages finished. This requires looking for the remotest objects, a challenge that only the largest telescopes, combined with a very careful observing strategy, can take up. Using a Gravitational Telescope With the advent of 8-10 meter class telescopes spectacular progress has been achieved during the last decade. Indeed it has since become possible to observe with some detail several thousand galaxies and quasars out to distances of nearly 12 billion light-years (i.e. up to a redshift of 3 [3]). In other words astronomers are now able to study individual galaxies, their formation, evolution, and other properties over typically 85 % of the past history of the Universe. Further in the past, however, observations of galaxies and quasars become scarce. Currently, only a handful of very faint galaxies are seen approximately 1,200 to 750 million years after the Big Bang (redshift 5-7). Beyond that, the faintness of these sources and the fact their light is shifted from the optical to the near infrared has so far severely limited the studies. An important breakthrough in this quest for the earliest formed galaxy has now been achieved by a team of French and Swiss astronomers [2] using ESO's Very Large Telescope (VLT) equipped with the near-infrared sensitive instrument ISAAC. To accomplish this, they had to combine the light amplification effect of a cluster of galaxies - a Gravitational Telescope - with the light gathering power of the VLT and the excellent sky conditions prevailing at Paranal. Searching for distant galaxies The hunt for such faint, elusive objects demands a particular approach. First of all, very deep images of a cluster of galaxies named Abell 1835 were taken using the ISAAC near-infrared instrument on the VLT. Such relatively nearby massive clusters are able to bend and amplify the light of background sources - a phenomenon called Gravitational Lensing and predicted by Einstein's theory of General Relativity. This natural amplification allows the astronomers to peer at galaxies which would otherwise be too faint to be seen. In the case of the newly discovered galaxy, the light is amplified approximately 25 to 100 times! Combined with the power of the VLT it has thereby been possible to image and even to take a spectrum of this galaxy. Indeed, the natural amplification effectively increases the aperture of the VLT from 8.2-m to 40-80 m. The deep near-IR images taken at different wavelengths have allowed the astronomers to characterise the properties of a few thousand galaxies in the image and to select a handful of them as potentially very distant galaxies. Using previously obtained images taken at the Canada-France-Hawaii Telescope (CFHT) on Mauna Kea and images from the Hubble Space Telescope, it has then been verified that these galaxies are indeed not seen in the optical. In this way, six candidate high redshift galaxies were recognised whose light may have been emitted when the Universe was less than 700 million years old. To confirm and obtain a more precise determination of the distance of one of these galaxies, the astronomers obtained Director's Discretionary Time to use again ISAAC on the VLT, but this time in its spectroscopic mode. After several months of careful analysis of the data, the astronomers are convinced to have detected a weak but clear spectral feature in the near-infrared domain. The astronomers have made a strong case that this feature is most certainly the Lyman-alpha emission line typical of these objects. This line, which occurs in the laboratory at a wavelength of 0.1216 μm, that is, in the ultraviolet, has been stretched to the near infrared at 1.34 μm, making Abell 1835 IR1916 the first galaxy known to have a redshift as large as 10. The most distant galaxy known to date ESO PR Photo 05a/04 ESO PR Photo 05a/04 ISAAC images of Abell 1835 [Preview - JPEG: 405 x 400 pix - 240k] [Normal - JPEG: 810 x 800 pix - 760k] ESO PR Photo 05b/04 ESO PR Photo 05b/04 Two-dimensional spectra of Abell 1835 IR1936 [Preview - JPEG: 555 x 400 pix - 208k] [Normal - JPEG: 1110 x 800 pix - 570k] Captions: ESO PR Photo 05a/04 shows an ISAAC image in the near-infrared of the core of the lensing cluster Abell 1835 (upper) with the location of the galaxy Abell 1835 IR1916 (white circle). The thumbnail images at the bottom show the images of the remote galaxy in the visible R-band (HST-WPC image) and in the J-, H-, and K-bands. The fact that the galaxy is not detected in the visible image but present in the others - and more so in the H-band - is an indication that this galaxy has a redshift around 10. ESO PR Photo 05b/04 is a reproduction from two-dimensional spectra around the emission line at 1.33745 μm showing the detected emission line of Abell 1835 IR1916 (circle above). If identified as Ly-alpha (0.1216 μm), this leads to a redshift z=10. The line has been observed in two independent spectra corresponding to two different settings of the spectrograph: the right panels show the spectra in the short wavelength setting (centred on 1.315 μm), the long wavelength setting (centred on 1.365 μm), and in the composite, respectively. The line is seen in the dark circles. This is the strongest case for a redshift in excess of the current spectroscopically confirmed record at z=6.6 and the first case of a double-digit redshift. Scaling the age of the Universe to a person's lifetime (80 years, say), the previous confirmed record showed a four-year toddler. With the present observations, we have a picture of the child when he was two and a half years old. From the images of this galaxy obtained in the various wavebands, the astronomers deduce that it is undergoing a period of intense star formation. But the amount of stars formed is estimated to be "only" 10 million times the mass of the sun, approximately ten thousand times smaller than the mass of our Galaxy, the Milky Way. In other words, what the astronomers see is the first building block of the present-day large galaxies. This finding agrees well with our current understanding of the process of galaxy formation corresponding to a successive build-up of the large galaxies seen today through numerous mergers of "building blocks", smaller and younger galaxies formed in the past. It is these building blocks which may have provided the first light sources that lifted the fog over the Universe and put an end to the Dark Ages. For Roser Pelló, from the Observatoire Midi-Pyrénées (France) and co-leader of the team, "these observations show that under excellent sky conditions like those at ESO's Paranal Observatory, and using strong gravitational lensing, direct observations of distant galaxies close to the Dark Ages are feasible with the best ground-based telescopes." The other co-leader of the team, Daniel Schaerer from the Geneva Observatory and University (Switzerland), is excited: "This discovery opens the way to future explorations of the first stars and galaxies in the early Universe."

Recognition of rotated images using the multi-valued neuron and rotation-invariant 2D Fourier descriptors

NASA Astrophysics Data System (ADS)

Aizenberg, Evgeni; Bigio, Irving J.; Rodriguez-Diaz, Eladio

2012-03-01

The Fourier descriptors paradigm is a well-established approach for affine-invariant characterization of shape contours. In the work presented here, we extend this method to images, and obtain a 2D Fourier representation that is invariant to image rotation. The proposed technique retains phase uniqueness, and therefore structural image information is not lost. Rotation-invariant phase coefficients were used to train a single multi-valued neuron (MVN) to recognize satellite and human face images rotated by a wide range of angles. Experiments yielded 100% and 96.43% classification rate for each data set, respectively. Recognition performance was additionally evaluated under effects of lossy JPEG compression and additive Gaussian noise. Preliminary results show that the derived rotation-invariant features combined with the MVN provide a promising scheme for efficient recognition of rotated images.

View compensated compression of volume rendered images for remote visualization.

PubMed

Lalgudi, Hariharan G; Marcellin, Michael W; Bilgin, Ali; Oh, Han; Nadar, Mariappan S

2009-07-01

Remote visualization of volumetric images has gained importance over the past few years in medical and industrial applications. Volume visualization is a computationally intensive process, often requiring hardware acceleration to achieve a real time viewing experience. One remote visualization model that can accomplish this would transmit rendered images from a server, based on viewpoint requests from a client. For constrained server-client bandwidth, an efficient compression scheme is vital for transmitting high quality rendered images. In this paper, we present a new view compensation scheme that utilizes the geometric relationship between viewpoints to exploit the correlation between successive rendered images. The proposed method obviates motion estimation between rendered images, enabling significant reduction to the complexity of a compressor. Additionally, the view compensation scheme, in conjunction with JPEG2000 performs better than AVC, the state of the art video compression standard.

The Hazards Data Distribution System update

USGS Publications Warehouse

Jones, Brenda K.; Lamb, Rynn M.

2010-01-01

After a major disaster, a satellite image or a collection of aerial photographs of the event is frequently the fastest, most effective way to determine its scope and severity. The U.S. Geological Survey (USGS) Emergency Operations Portal provides emergency first responders and support personnel with easy access to imagery and geospatial data, geospatial Web services, and a digital library focused on emergency operations. Imagery and geospatial data are accessed through the Hazards Data Distribution System (HDDS). HDDS historically provided data access and delivery services through nongraphical interfaces that allow emergency response personnel to select and obtain pre-event baseline data and (or) event/disaster response data. First responders are able to access full-resolution GeoTIFF images or JPEG images at medium- and low-quality compressions through ftp downloads. USGS HDDS home page: http://hdds.usgs.gov/hdds2/

Milky Way Past Was More Turbulent Than Previously Known

NASA Astrophysics Data System (ADS)

2004-04-01

Results of 1001 observing nights shed new light on our Galaxy [1] Summary A team of astronomers from Denmark, Switzerland and Sweden [2] has achieved a major breakthrough in our understanding of the Milky Way, the galaxy in which we live. After more than 1,000 nights of observations spread over 15 years, they have determined the spatial motions of more than 14,000 solar-like stars residing in the neighbourhood of the Sun. For the first time, the changing dynamics of the Milky Way since its birth can now be studied in detail and with a stellar sample sufficiently large to allow a sound analysis. The astronomers find that our home galaxy has led a much more turbulent and chaotic life than previously assumed. PR Photo 10a/04: Distribution on the sky of the observed stars. PR Photo 10b/04: Stars in the solar neigbourhood and the Milky Way galaxy (artist's view). PR Video Clip 04/04: The motions of the observed stars during the past 250 million years. Unknown history Home is the place we know best. But not so in the Milky Way - the galaxy in which we live. Our knowledge of our nearest stellar neighbours has long been seriously incomplete and - worse - skewed by prejudice concerning their behaviour. Stars were generally selected for observation because they were thought to be "interesting" in some sense, not because they were typical. This has resulted in a biased view of the evolution of our Galaxy. The Milky Way started out just after the Big Bang as one or more diffuse blobs of gas of almost pure hydrogen and helium. With time, it assembled into the flattened spiral galaxy which we inhabit today. Meanwhile, generation after generation of stars were formed, including our Sun some 4,700 million years ago. But how did all this really happen? Was it a rapid process? Was it violent or calm? When were all the heavier elements formed? How did the Milky Way change its composition and shape with time? Answers to these and many other questions are 'hot' topics for the astronomers who study the birth and evolution of the Milky Way and other galaxies. Now the rich results of a 15 year-long marathon survey by a Danish-Swiss-Swedish research team [2] are providing some of the answers. 1,001 nights at the telescopes ESO PR Photo 10a/04 ESO PR Photo 10a/04 Sky distribution of the observed stars [Preview - JPEG: 518 x 400 pix - 96k] [Normal - JPEG: 1035 x 800 pix - 897k] Caption: ESO PR Photo 10a/04 shows the distribution on the sky of the approx. 14,000 observed stars. The region on the left that is denser than its surroundings is the nearby Hyades star cluster. The team spent more than 1,000 observing nights over 15 years at the Danish 1.5-m telescope of the European Southern Observatory at La Silla (Chile) and at the Swiss 1-m telescope of the Observatoire de Haute-Provence (France). Additional observations were made at the Harvard-Smithsonian Center for Astrophysics in the USA. A total of more than 14,000 solar-like stars (so-called F- and G-type stars) were observed at an average of four times each - a total of no less than 63,000 individual spectroscopic observations! This now complete census of neighbourhood stars provides distances, ages, chemical analysis, space velocities and orbits in the general rotation of the Milky Way. It also identifies those stars (about 1/3 of them all) which the astronomers found to be double or multiple. This very complete data set for the stars in the solar neighbourhood will provide food for thought by astronomers for years to come. A dream come true ESO PR Photo 10b/04 ESO PR Photo 10b/04 Stars in the solar neighbourhood [Preview - JPEG: 459 x 400 pix - 29k] [Normal - JPEG: 918 x 800 pix - 441k] [FullRes - JPEG: 3000 x 2613 pix - 4.4Mb] Caption: ESO PR Photo 10b/04 provides an artist's view of the observed group of stars orbiting the Milky Way together with the Sun, as seen by an imaginary observer outside the Galaxy. The orbit of the Sun is shown. For clarity, the stars surrounding the local volume have been removed here. These observations provide the long-sought missing pieces of the puzzle to get a clear overview of the solar neighbourhood. They effectively mark the conclusion of a project started more than twenty years ago.. In fact, this work marks the fulfilment of an old dream by Danish astronomer Bengt Strömgren (1908-1987), who pioneered the study of the history of the Milky Way through systematic studies of its stars. Already in the 1950's he designed a special system of colour measurements to determine the chemical composition and ages of many stars very efficiently. And the Danish 50-cm and 1.5-m telescopes at the ESO La Silla Observatory (Chile) were constructed to make such projects possible. Another Danish astronomer, Erik Heyn Olsen made the first step in the 1980's by measuring the flux (light intensity) in several wavebands (in the "Strömgren photometric system") of 30,000 A, F and G stars over the whole sky to a fixed brightness limit. Next, ESA's Hipparcos satellite determined precise distances and velocities in the plane of the sky for these and many other stars. The missing link was the motions along the line of sight (the so-called radial velocities). They were then measured by the present team from the Doppler shift of spectral lines of the stars (the same technique that is used to detect planets around other stars), using the specialized CORAVEL instrument. Stellar orbits in the Milky Way ESO PR Video Clip 04/04 ESO Video Clip 04/04 Motions of the observed stars in the Milky Way [MPG - 1.3Mb] [Quick Time Video - 248k] [Animated GIF - 128k] Caption: ESO PR Video Clip 04/04 shows the stars studied during the present programme making their most recent orbital revolution around the Galactic centre before converging into the small volume where they were observed by the team. The duration of the video corresponds to about 250 million years. The yellow dot and white curve show how the Sun moved during this last of its about 20 laps around our Galaxy. With the velocity information completed, the astronomers can now compute how the stars have wandered around in the Galaxy in the past, and where they will go in the future, cf. PR Video Clip 04/04. Birgitta Nordström, leader of the team, explains: "For the first time we have a complete set of observed stars that is a fair representation of the stellar population in the Milky Way disc in general. It is large enough for a proper statistical analysis and also has complete velocity and binary star information. We have just started the analysis of this dataset ourselves, but we know that our colleagues worldwide will rush to join in the interpretation of this treasure trove of information." The team's initial analysis indicates that objects like molecular clouds, spiral arms, black holes, or maybe a central bar in the Galaxy, have stirred up the motion of the stars throughout the entire history of the Milky Way disc. This in turn reveals that the evolution of the Milky Way was far more complex and chaotic than traditional, simplified models have long so far assumed. Supernova explosions, galaxy collisions, and infall of huge gas clouds have made the Milky Way a very lively place indeed!

Dust formation at low metallicity

NASA Astrophysics Data System (ADS)

Ferrarotti, A. S.; Gail, H.-P.

Stars between 3Modot and 25Modot reach their final stages of stellar evolution either as AGB (asymptotic giant branch) stars and finally become white dwarfs, or end in a supernova explosion. The last evolutionary stages, shortly before the final state, are regularly accompanied by stellar winds which lead to substantial mass loss and develop optically very thick dust shells. Mass loss for smaller and medium sized stars higher up on the AGB depends predominantly on the metallicity of the star. For Pop I metallicity, the mass loss is caused by dust condensation. This process is not possible for stars of small Z. Thus, their final evolution strongly depends on the possibility of dust formation. Our research focuses on the dependence of dust formation of the first stellar generation on Z and on the initial mass of the star. Furthermore, we investigate when dust formation becomes possible in stellar winds and the effects this process has on the evolution of the star at the final evolutionary stages. With synthetic AGB evolution models some important issues in stellar evolution can tried to be answered: (1) mass loss on the AGB, (2) the shift of the limit (γ>1) for the onset of dust driven winds with Z and (3) the critical Z when dust formation becomes possible.

New Image of Comet Halley in the Cold

NASA Astrophysics Data System (ADS)

2003-09-01

VLT Observes Famous Traveller at Record Distance Summary Seventeen years after the last passage of Comet Halley , the ESO Very Large Telescope at Paranal (Chile) has captured a unique image of this famous object as it cruises through the outer solar system. It is completely inactive in this cold environment. No other comet has ever been observed this far - 4200 million km from the Sun - or that faint - nearly 1000 million times fainter than what can be perceived with the unaided eye. This observation is a byproduct of a dedicated search [1] for small Trans-Neptunian Objects, a population of icy bodies of which more than 600 have been found during the past decade. PR Photo 27a/03 : VLT image (cleaned) of Comet Halley PR Photo 27b/03 : Sky field in which Comet Halley was observed PR Photo 27c/03 : Combined VLT image with star trails and Comet Halley The Halley image ESO PR Photo 27a/03 ESO PR Photo 27a/03 [Preview - JPEG: 546 x 400 pix - 207k] [Normal - JPEG: 1092 x 800 pix - 614k] [FullRes - JPEG: 1502 x 1100 pix - 1.1M] Caption : PR Photo 27a/03 shows the faint, star-like image of Comet Halley (centre), observed with the ESO Very Large Telescope (VLT) at the Paranal Observatory on March 6-8, 2003. 81 individual exposures from three of the four 8.2-m VLT telescopes with a total exposure time of about 9 hours were combined to show the magnitude 28.2 object. At this time, Comet Halley was about 4200 million km from the Sun (28.06 AU) and 4080 million km (27.26 AU) from the Earth. All images of stars and galaxies in the field were removed during the extensive image processing needed to produce this unique image. Due to the remaining, unavoidable "background noise", it is best to view the comet image from some distance. The field measures 60 x 40 arcsec 2 ; North is up and East is left. Remember Comet Halley - the famous "haired star" that has been observed with great regularity - about once every 76 years - during more than two millennia? Which was visited by an international spacecraft armada when it last passed through the inner solar system in 1986? And which put on a fine display in the sky at that time? Now, 17 years after that passage, this cosmic traveller has again been observed at the European Southern Observatory. Moving outward along its elongated orbit into the deep-freeze outer regions of the solar system, it is now almost as far away as Neptune, the most distant giant planet in our system. At 4,200 million km from the Sun, Comet Halley has now completed four-fifths of its travel towards the most distant point of this orbit. As the motion is getting ever slower, it will reach that turning point in December 2023, after which it begins its long return towards the next passage through the inner solar system in 2062. The new image of Halley was taken with the Very Large Telescope (VLT) at Paranal (Chile); a "cleaned" version is shown in PR Photo 27a/03 . It was obtained as a byproduct of an observing program aimed at studying the population of icy bodies at the rim of the solar system. The image shows the raven-black, 10-km cometary nucleus of ice and dust as an unresolved faint point of light, without any signs of activity. A cold and inactive "dirty snowball" The brightness of the comet was measured as visual magnitude V = 28.2, or nearly 1000 million times fainter than the faintest objects that can be perceived in a dark sky with the unaided eye. The pitch black nucleus of Halley reflects about 4% of the sunlight; it is a very "dirty" snowball indeed. We know from the images obtained by the ESA Giotto spacecraft in 1986 that it is avocado-shaped and on the average measures about 10 km diameter across. The VLT observation is therefore equivalent to seeing a 5-cm piece of coal at a distance of 20,500 km (about the distance between the Earth's poles) and to do so in the evening twilight. This is because at the large distance of Comet Halley, the infalling sunlight is 800 times fainter than here on Earth. The measured brightness of the cometary image perfectly matches that expected for the nucleus alone, taking into account the distance, the solar illumination and the reflectivity of the surface. This shows that all cometary activity has now ceased. The nucleus is now an inert ball of ice and dust, and is likely to remain so until it again returns to the solar neighbourhood, more than half a century from now. A record observation At 28.06 AU heliocentric distance (1 AU = 149,600,000 km - the mean distance between the Earth and the Sun), this is by far the most distant observation ever made of a comet [2]. It is also the faintest comet ever detected (by a factor of about 5); the previous record, magnitude 26.5, was co-held by comet Halley at 18.8 AU (with the ESO New Technology Telescope in 1994) and Comet Sanguin at 8.5 AU (with the Keck II telescope in 1997). Interestingly, when Comet Halley reaches its largest distance from the Sun in December 2023, about 35 AU, it will only be 2.5 times fainter than it is now. The comet would still have been detected within the present exposure time. This means that with the VLT, for the first time in the long history of this comet, the astronomers now possess the means to observe it at any point in its 76-year orbit! A census of faint Transneptunian Objects The image of Halley was obtained by combining a series of exposures obtained simultaneously with three of the 8.2-m telescopes (ANTU, MELIPAL and YEPUN) during 3 consecutive nights with the main goal to count the number of small icy bodies orbiting the Sun beyond Neptune, known as Transneptunian Objects (TNOs). Since the discovery of the first TNO in 1992, more than 600 have been found, most of these measuring several hundred km across. The VLT observations aim at a census of smaller TNOs - the incorporation of the sky field with Comet Halley allows verification of the associated, extensive data processing. Similar TNO-surveys have been performed before, but this is the first time that several very large telescopes are used simultaneously in order to observe extremely faint, hitherto inaccessible objects. The VLT observations will provide very useful information about the frequency of (smaller) TNOs of different sizes and thereby, indirectly, about the rate of collisions they have suffered since their formation. This study will also cast more light on the mystery of the apparent "emptiness" of the very distant solar system. Why are so few objects found beyond 45 AU? It is not known whether this is because there are no objects out there or if they are simply too small or too dark, or both, to have been detected so far. How to extract a very faint comet image ESO PR Photo 27b/03 ESO PR Photo 27b/03 [Preview - JPEG: 546 x 400 pix - 211k] [Normal - JPEG: 1092 x 800 pix - 649k] [FullRes - JPEG: 1502 x 1100 pix - 1.1M] ESO PR Photo 27c/03 ESO PR Photo 27c/03 [Preview - JPEG: 530 x 400 pix - 184k] [Normal - JPEG: 1059 x 800 pix - 573k] [FullRes - JPEG: 1515 x 1145 pix - 983k] Caption : PR Photo 27b/03 shows the sky field in which Comet Halley was observed with the ESO Very Large Telescope (VLT) at the Paranal Observatory on March 6-8, 2003. 81 individual exposures with a total exposure time of 32284 sec (almost 9 hours) from three of the four 8.2-m telescopes were cleaned and combined to produce this composite photo, displaying numerous faint stars and galaxies in the field. The predicted motion of Comet Halley during the three nights is indicated by short red lines. The long straight lines at the top and to the right were caused by artificial satellites in orbit around the Earth that passed through the field during the exposure. The field measures 300 x 180 arcsec 2. PR Photo 27c/03 was produced by adding the same frames, however, while shifting their positions according to the motion of the comet. The faint, star-like image of Comet Halley is now visible (in circle, at centre); all other objects (stars, galaxies) in the field are "trailed". A satellite trail is visible at the very top. The field measures 60 x 40 arcsec 2 ; North is up and East is left in both photos. The combination of the images from three 8.2-m telescopes obtained during three consecutive nights is not straightforward. The individual characteristics of the imaging instruments (FORS1 on ANTU, VIMOS on MELIPAL and FORS2 on YEPUN) must be taken into account and corrected. Moreover, the motion of the very faint moving objects has to be compensated for, even though they are too faint to be seen on individual exposures; they only reveal themselves when several (many!) frames are combined during the final steps of the process. It is for this reason that the presence of a known, faint object like Comet Halley in the field-of-view provides a powerful control of the data processing. If Halley is visible at the end, it has been done properly. The extensive data processing is now under way and the intensive search for new Transneptunian objects has started. The field with Comet Halley was observed with the giant telescopes during each of three consecutive nights, yielding 81 individual exposures with a total exposure time of almost 9 hours. The faint comet is completely invisible on the individual images. On PR Photo 27b/03 , these frames have been added directly, showing very faint stars and galaxies. Also this photo does not show the moving comet, but by shifting the frames before they are added in such a way that the comet remains fixed, a faint image does emerge among the stellar trails, cf. PR Photo 27c/03 . A better, but much more cumbersome method is to "subtract" the images of all stars and galaxies from the individual exposures, before they are added. PR Photo 27a/03 has been produced in this way and shows the image of Comet Halley more clearly. In total, about 20,000 photons were detected from the comet, i.e. about one photon per 8.2-m telescope every 1.6 second. However, during the same time, the telescopes collected about one thousand times more photons from molecular emission in the Earth's atmosphere within the sky area covered by the comet's image. The presence of this considerable "noise" calls for very careful image processing in order to detect the faint comet signal. The identity of the comet is beyond doubt: the image is faintly visible on composite photos obtained during a single night, demonstrating that the direction and rate of motion of the detected object perfectly matches that predicted for Comet Halley from its well-known orbit. Moreover, the image is located within 1 arcsec from the predicted position in the sky. Outlook After its passage in 1910, Comet Halley was again seen in 1982, when David Jewitt first observed its faint image with the 5-m Palomar telescope at a time when it was 11 AU from the Sun, a little further than planet Saturn. It was observed from La Silla two months later. As the comet approached, the ice in the nucleus began to evaporate (sublimate), and the comet soon became surrounded by a cloud of dust and gas (the "coma"). It developed the tail that is typical of comets and was extensively observed, also from several spacecraft passing close to its nucleus in early 1986. Observations have since been made of Comet Halley as it moves away from the Sun, documenting a steady decrease of activity. When it reached the distance of Saturn, the tail and coma had disappeared completely, leaving only the 5 x 5 x 15 km avocado-shaped "dirty snowball" nucleus. However, Halley was still good for a major surprise: in 1991, a gigantic explosion happened, providing it with an expanding, extensive cloud of dust for several months. It is not known whether this event was caused by a collision with an unknown piece of rock or by internal processes (a last "sigh" on the way out). Until now, the most recent observation of Comet Halley was done in 1994 with the New Technology Telescope (NTT) at La Silla, at that time the most powerful ESO telescope. It showed the comet to be completely inactive. Nine years later, so does the present VLT observation. It is unlikely that any activity will be seen until this famous object again approaches the Sun, more than 50 years from now.

Mars Global Digital Dune Database: MC2-MC29

USGS Publications Warehouse

Hayward, Rosalyn K.; Mullins, Kevin F.; Fenton, L.K.; Hare, T.M.; Titus, T.N.; Bourke, M.C.; Colaprete, Anthony; Christensen, P.R.

2007-01-01

Introduction The Mars Global Digital Dune Database presents data and describes the methodology used in creating the database. The database provides a comprehensive and quantitative view of the geographic distribution of moderate- to large-size dune fields from 65? N to 65? S latitude and encompasses ~ 550 dune fields. The database will be expanded to cover the entire planet in later versions. Although we have attempted to include all dune fields between 65? N and 65? S, some have likely been excluded for two reasons: 1) incomplete THEMIS IR (daytime) coverage may have caused us to exclude some moderate- to large-size dune fields or 2) resolution of THEMIS IR coverage (100m/pixel) certainly caused us to exclude smaller dune fields. The smallest dune fields in the database are ~ 1 km2 in area. While the moderate to large dune fields are likely to constitute the largest compilation of sediment on the planet, smaller stores of sediment of dunes are likely to be found elsewhere via higher resolution data. Thus, it should be noted that our database excludes all small dune fields and some moderate to large dune fields as well. Therefore the absence of mapped dune fields does not mean that such dune fields do not exist and is not intended to imply a lack of saltating sand in other areas. Where availability and quality of THEMIS visible (VIS) or Mars Orbiter Camera narrow angle (MOC NA) images allowed, we classifed dunes and included dune slipface measurements, which were derived from gross dune morphology and represent the prevailing wind direction at the last time of significant dune modification. For dunes located within craters, the azimuth from crater centroid to dune field centroid was calculated. Output from a general circulation model (GCM) is also included. In addition to polygons locating dune fields, the database includes over 1800 selected Thermal Emission Imaging System (THEMIS) infrared (IR), THEMIS visible (VIS) and Mars Orbiter Camera Narrow Angle (MOC NA) images that were used to build the database. The database is presented in a variety of formats. It is presented as a series of ArcReader projects which can be opened using the free ArcReader software. The latest version of ArcReader can be downloaded at http://www.esri.com/software/arcgis/arcreader/download.html. The database is also presented in ArcMap projects. The ArcMap projects allow fuller use of the data, but require ESRI ArcMap? software. Multiple projects were required to accommodate the large number of images needed. A fuller description of the projects can be found in the Dunes_ReadMe file and the ReadMe_GIS file in the Documentation folder. For users who prefer to create their own projects, the data is available in ESRI shapefile and geodatabase formats, as well as the open Geographic Markup Language (GML) format. A printable map of the dunes and craters in the database is available as a Portable Document Format (PDF) document. The map is also included as a JPEG file. ReadMe files are available in PDF and ASCII (.txt) files. Tables are available in both Excel (.xls) and ASCII formats.

Late Afternoon at Taruntius

NASA Astrophysics Data System (ADS)

2002-08-01

Thirty-three years after the first manned landing on the Moon, the ESO Very Large Telescope (VLT) has obtained what may be the sharpest image of the lunar surface ever recorded from the ground, cf. PR Photo 19a/02 . It was made with the NAOS-CONICA (NACO) adaptive optics camera mounted on the ESO VLT 8.2-m YEPUN telescope at the Paranal Observatory. The photo shows an area about 700 km from the Apollo XI landing site. The location is in the Eastern hemisphere, just North of the lunar equator, and right between two of the major "seas", Mare Tranquillitatis (Sea of Tranquillity) and Mare Foecunditatis (Sea of Fertility). The field-of-view measures about 60 x 45 km 2 (taking into account the foreshortening because of the viewing angle [2]), with part of a sunlit, 10-km wide crater named Cameron [1] surrounded by a comparatively level terrain, bordered by some hills and, not least, with an incredible number of smaller craters. The site of this NACO photo is situated at the rim of an older, rather eroded 56-km crater, Taruntius [1]. A small part of the multiple walls of that crater are seen in the upper right corner and also to the left of the bottom centre of PR Photo 19a/02 . The centre of Taruntius is near the lower right corner of the photo. The rather flat terrain to the left in the photo corresponds to an "opening" in the crater walls. At the time of the exposure, the Sun was approximately 7° above the Western horizon to the left [2], and the shadows are therefore quite prominent, approx. 8 times longer than the elevation of the corresponding peaks and hills. The nominal image sharpness is 0.07 arcsec, or about 130 metres on the lunar surface (in the N-S direction). Elevation differences of a few tens of metres only are therefore visible by the shadows they cast. The VLT image represents what an astronaut (with normal eye acuity of 1 arcmin) would see from 400 km above the surface. Lunar surface formations ESO PR Photo 19b/02 ESO PR Photo 19b/02 [Preview - JPEG: 462 x 400 pix - 66k] [Full-Res - JPEG: 1250 x 1082 pix - 656k] Caption : PR Photo 19b/02 is a computer-processed version of PR Photo 19a/02 , in which the lunar surface is now viewed directly "from above". Located at 46° East lunar longitude, 6° North lunar latitude, this area is viewed from the VLT at an inclined angle and the craters therefore all appear as ellipses in the NACO image. However, taking into account the direction of the line-of-sight at the time of the observation [2], this view can be "rectified" by simple image processing. The corresponding "view from above" is shown in PR Photo 19b/02 ; most of the craters in the field now appear quite round. Many different types of lunar surface formations are visible in the VLT photo. In addition to the numerous impact craters of all sizes, there are also hills and ridges of a great variety of shapes, as well as a prominent "valley" (a "Rima", or fissure) that stretches nearly 50 km through the photo in East-West direction. It has been identified on earlier photos and as it is situated inside that crater, it was given the name "Rimae Taruntius" in 1985. It is very well resolved in this photo and resembles "Rima Hadley" that was visited by the Apollo 15 astronauts in 1971, but is much smaller. The mean width is about 600 metres (12 pixels). The bottom is in the shadows and the depth is therefore unknown. It is overlapped by several smaller craters that must have been caused by impacts after this depression was formed. Measuring the length of the shadows, it is possible to infer the height of some of the formations. For instance, the shadows of the two peaks at the lower centre of the photo are about 4 km long, indicating that these formations are about 500 metres tall. The surroundings ESO PR Photo 19c/02 ESO PR Photo 19c/02 [Preview - JPEG: 482 x 400 pix - 77k] [Normal - JPEG: 964 x 800 pix - 440k] [Full-Res - JPEG: 2408 x 1998 pix - 1.6M] Caption : Where is the NACO field at the Taruntius crater located on the Moon? A 400 x 400 km 2 area surrounding this crater is shown in the right panel of PR Photo 19c/02 ; it has been reproduced from a photo mosaique with 500-metre resolution based on exposures made in 1994 by NASA's "Clementine" spacecraft in lunar orbit [3]. Taruntius , Cameron and other craters in this area are identified in the diagram at the lower left. The area covered by the Clementine photo is outlined on a photo of the entire Moon (upper left), obtained at nearly the same phase as when the NACO image was made [4]. This area around Taruntius was imaged in 1994 by the NASA Clementine spacecraft when it mapped the entire lunar surface at 125-250 metres per pixel. The data led to the first complete map of the mineralogy (rock types) of the Moon. The Clementine image shown here ( PR Photo 19c/02 ) helps to identify the small area depicted by NACO. It is part of the Clementine Basemap Mosaic and has been observed with the onboard Ultraviolet/Visible camera through an optical filter centred at 750 nm [3]. It covers a field-of-view of about 400 x 400 km 2 , with a nominal resolution of about 500 metres. Many craters are well visible, including Taruntius with Cameron on the upper left sector of the multiple rim. Testing the NAOS-CONICA instrument This splendid VLT image is a by-product of the ongoing, thorough testing of the NAOS-CONICA (NACO) Adaptive Optics facility , recently installed at the 8.2-m YEPUN telescope, the fourth unit of the Very Large Telescope (VLT) at the ESO Paranal Observatory. This major astronomical instrument has already delivered other impressive views of the Universe, cf. ESO PR 25/01 and ESO PR Photos 04a-c/02. Normally, NACO functions by "locking" on a point-like guide star, correcting the image smearing caused in the turbulent terrestrial atmophere by measuring the deformation of the recorded image of that star. However, in the morning of April 30, 2002, shortly before sunrise, the astronomers and engineers working with NACO decided to do a test of wavefront sensing on an extended celestial object . For this, the giant telescope was turned towards the Moon, at that moment seen in the southern constellation of Ophiuchus, high above the western horizon at Paranal [2]. Guiding the advanced instrument on a sunlit lunar peak in the area between Mare Tranquillitatis and Mare Foecunditatis, a short exposure (0.22 seconds) was made through a narrow-band near-infrared filter (at wavelength 2.3 µm), with the adaptive optics (AO) activated in closed-loop mode. The telescope was set to track on that lunar mountain and the flexible AO mirror in NACO superbly "refocussed" the 25 x 25 arcsec 2 field-of-view. Although the atmosphere above Paranal was rather turbulent that morning - the nominal seeing was measured as 1.5 arcsec - and despite the use of an extended feature for the guiding, the NACO adaptive optics compensation achieved nearly theoretical image sharpness, about 0.068 arcsec for this waveband. Images of other areas on the lunar surface may be attempted in the future with the VLT and NACO. Other lunar images An impressive ESO photo of the waning Moon was obtained in 1999 with the WFI camera at the La Silla Observatory, cf. ESO PR 02/99. Many websites display fine images of the Moon, obtained with professional and amateur telescopes. Many links are available at the dedicated page maintained by the Centre de Données Planétaires at the Institut d'Astrophysique Spatiale (Paris, France). The Hubble Space Telescope (HST) did not photograph the Taruntius area, but an excellent photo of the Copernicus crater was published in 1999. Notes [1]: The lunar crater Taruntius (lunar co-ordinates: 5.6° N; 46.5° E) was named in 1935 by the International Astronomical Union (IAU) after the Roman philosopher Lucius Firmanus Taruntius (? - 86 B.C.). It measures about 56 km across. The 10-km crater Cameron (6.2° N; 45.9° E) was named by the IAU in 1972 after the American astronomer Robert Curry Cameron (1925 - 1972). Names of surface features on planets and their natural satellites, including the Earth's Moon, are allocated by the "IAU Working Group for Planetary System Nomenclature" and published on the web in the "Gazetteer of Planetary Nomenclature". [2]: The NACO image was exposed on April 30, 2002, at 09:42 hrs UT. The geometrical circumstances of this observation were the following: the Moon was located at (Azimuth Az = 266° Elevation h = +62°) in the sky above the VLT at the Paranal Observatory; the Earth (Paranal) was located at ( Az = 263° h = +50°) and the Sun at ( Az = 268° h = +7°) in the lunar sky above the Cameron crater. The distance from Paranal to the Moon was about 370,000 km. [3]: Acknowledgment: The Clementine Basemap Mosaic was compiled for the National Aeronautics and Space Administration (NASA) by the United States Geological Survey (USGS) under the direction of Dr. Alfred S. McEwen, principal Investigator (now with the University of Arizona). The DoD/BMDO Clementine spacecraft was built and operated by the Naval Research Laboratory, with remote-sensing instruments from the Lawrence Livermore National Laboratory. The field shown in PR Photo 19c/02 was reproduced from a 0.5-km full resolution frame (BM14N045) for which a browse page is available on the web; the file itself is at: http://pdsimage.wr.usgs.gov/CDROMS/cl_3015/bm90_90/bm14n045.img. Another image of the Taruntius area with 100-metre pixels is available at http://pdsimage.wr.usgs.gov/CDROMS/cl_3003/bi00_35n/bi03n045.img. A comprehensive collection of data gathered by the instruments onboard Clementine may be found via the Clementine Navigator of the Jet Propulsion Laboratory Planetary Data System. Clementine also obtained images of a small fraction of the lunar surface by means of a High Resolution Camera (HRC) with a nominal resolution of 7 to 20 metres. However, none of these covered the area shown in the NACO photo. [4]: Acknowledgment: The image of the entire Moon shown at the upper left of PR Photo 19c/02 was obtained with a 12-inch refractor when the Moon was "aged" 17.9 days, i.e. almost the same phase as when the NACO image was taken. It is reproduced from the Berliner Mond-Atlas (3rd edition, 1989), published by the Wilhelm-Foerster-Sternwarte - Berlin (Germany). ESO PR Photos 19a-c/02 may be reproduced, if credit is given to the European Southern Observatory (ESO). Please note the additional credits needed for PR Photo 19c/02 , as stated in Notes 3 and 4.

Specific plant induced biofilm formation in Methylobacterium species.

PubMed

Rossetto, Priscilla B; Dourado, Manuella N; Quecine, Maria C; Andreote, Fernando D; Araújo, Welington L; Azevedo, João L; Pizzirani-Kleiner, Aline A

2011-07-01

Two endophytic strains of Methylobacterium spp. were used to evaluate biofilm formation on sugarcane roots and on inert wooden sticks. Results show that biofilm formation is variable and that plant surface and possibly root exudates have a role in Methylobacterium spp. host recognition, biofilm formation and successful colonization as endophytes.

Iron Oxide Deposition from Aqueous Solution and Iron Formations on Mars

NASA Technical Reports Server (NTRS)

Catling, David; Moore, Jeff

2000-01-01

Iron formations are ancient, laminated chemical sediments containing at least 15 wt% Fe. We discuss possible mechanisms for their formation in aqueous environments on early Mars. Such iron oxide deposits may be detectable today.

Datacube Interoperability, Encoding Independence, and Analytics

NASA Astrophysics Data System (ADS)

Baumann, Peter; Hirschorn, Eric; Maso, Joan

2017-04-01

Datacubes are commonly accepted as an enabling paradigm which provides a handy abstraction for accessing and analyzing the zillions of image files delivered by the manifold satellite instruments and climate simulations, among others. Additionally, datacubes are the classic model for statistical and OLAP datacubes, so a further information category can be integrated. From a standards perspective, spatio-temporal datacubes naturally are included in the concept of coverages which encompass regular and irregular grids, point clouds, and general meshes - or, more abstractly, digital representations of spatio-temporally varying phenomena. ISO 19123, which is identical to OGC Abstract Topic 6, gives a high-level abstract definition which is complemented by the OGC Coverage Implementation Schema (CIS) which is an interoperable, yet format independent concretization of the abstract model. Currently, ISO is working on adopting OGC CIS as ISO 19123-2; the existing ISO 19123 standard is under revision by one of the abstract authors and will become ISO 19123-1. The roadmap agreed by ISO further foresees adoption of the OGC Web Coverage Service (WCS) as an ISO standard so that a complete data and service model will exist. In 2016, INSPIRE has adopted WCS as Coverage Download Service, including the datacube analytics language Web Coverage Processing Service (WCPS). The rasdaman technology (www.rasdaman.org) is both OGC and INSPIRE Reference Implementation. In the global EarthServer initiative rasdaman database sizes are exceeding 250 TB today, heading for the Petabyte frontier well in 2017. Technically, CIS defines a compact, efficient model for representing multi-dimensional datacubes in several ways. The classical coverage cube defines a domain set (where are values?), a range set (what are these values?), and range type (what do the values mean?), as well as a "bag" for arbitrary metadata. With CIS 1.1, coordinate/value pair sequences have been added, as well as tiled representations. Further, CIS 1.1 offers a unified model for any kind of regular and irregular grids, also allowing sensor models as per SensorML. Encodings include ASCII formats like GML, JSON, RDF as well as binary formats like GeoTIFF, NetCDF, JPEG2000, and GRIB2; further, a container concept allows mixed representations within one coverage file utilizing zip or other convenient package formats. Through the tight integration with the Sensor Web Enablement (SWE), a lossless "transport" from sensor into coverage world is ensured. The corresponding service model of WCS supports datacube operations ranging from simple data extraction to complex ad-hoc analytics with WPCS. Notably, W3C is working has set out on a coverage model as well; it has been designed relatively independently from the abovementioned standards, but there is informal agreement to link it into the CIS universe (which allows for different, yet interchangeable representations). Particularly interesting in the W3C proposal is the detailed semantic modeling of metadata; as CIS 1.1 supports RDF, a tight coupling seems feasible.

Infrared Images of an Infant Solar System

NASA Astrophysics Data System (ADS)

2002-05-01

ESO Telescopes Detect a Strange-Looking Object Summary Using the ESO 3.5-m New Technology Telescope and the Very Large Telescope (VLT) , a team of astronomers [1] have discovered a dusty and opaque disk surrounding a young solar-type star in the outskirts of a dark cloud in the Milky Way. It was found by chance during an unrelated research programme and provides a striking portrait of what our Solar System must have looked like when it was in its early infancy. Because of its striking appearance, the astronomers have nicknamed it the "Flying Saucer" . The new object appears to be a perfect example of a very young star with a disk in which planets are forming or will soon form, and located far away from the usual perils of an active star-forming environment . Most other young stars, especially those that are born in dense regions, run a serious risk of having their natal dusty disks destroyed by the blazing radiation of their more massive and hotter siblings in these clusters. The star at the centre of the "Flying Saucer", seems destined to live a long and quiet life at the centre of a planetary system , very much like our own Sun. This contributes to making it a most interesting object for further studies with the VLT and other telescopes. The mass of the observed disk of gas and dust is at least twice that of the planet Jupiter and its radius measures about 45 billion km, or 5 times the size of the orbit of Neptune. PR Photo 12a/02 : The "Flying Saucer" object photographed with NTT/SOFI. PR Photo 12b/02 : VLT/ISAAC image of this object. PR Photo 12c/02 : Enlargement of VLT/ISAAC image . Circumstellar Disks and Planets Planets form in dust disks around young stars. This is a complex process of which not all stages are yet fully understood but it begins when small dust particles collide and stick to each other. For this reason, observations of such dust disks, in particular those that appear as extended structures (are "resolved"), are very important for our understanding of the formation of solar-type stars and planetary systems from the interstellar medium. However, in most cases the large difference of brightness between the young star and its surrounding material makes it impossible to image directly the circumstellar disk. But when the disk is seen nearly edge-on, the light from the central star will be blocked out by the dust grains in the disk. Other grains below and above the disk midplane scatter the stellar light, producing a typical pattern of a dark lane between two reflection nebulae. The first young stellar object (YSO) found to display this typical pattern, HH 30 IRS in the Taurus dark cloud at a distance of about 500 light-years (140 pc), was imaged by the Hubble Space telescope (HST) in 1996. Edge-on disks have since also been observed with ground-based telescopes in the near-infrared region of the spectrum, sometimes by means of adaptive optics techniques or speckle imaging, or under very good sky image quality, cf. ESO PR Photo 03d/01 with a VLT image of such an object in the Orion Nebula. A surprise discovery ESO PR Photo 12a/02 ESO PR Photo 12a/02 [Preview - JPEG: 400 x 459 pix - 55k] [Normal - JPEG: 800 x 918 pix - 352k] Caption : PR Photo 12a/02 shows a three-colour reproduction of the discovery image of strange-looking object (nicknamed the "Flying Saucer" by the astronomers), obtained with the SOFI multi-mode instrument at the ESO 3.5-m New Technology Telescope (NTT) at the La Silla Observatory. Compared to the unresolved stars in the field, the image of this object appears extended. Two characteristic reflection nebulae are barely visible, together with a marginally resolved dark dust lane in front of the star and oriented East-West. Technical information about the photo is available below. Last year, a group of astronomers [1] carried out follow-up observations of new X-ray sources found by the ESA XMM-Newton and NASA Chandra X-ray satellites. They were looking at the periphery of the so-called Rho Ophiuchi dark cloud , one of the nearest star-forming regions at a distance of about 500 light-years (140 pc), obtaining images in near-infrared light with the SOFI multi-mode instrument on the 3.5-m New Technology Telescope (NTT) at the ESO La Silla Observatory (Chile). On one of the NTT photos obtained on April 7, 2001, they discovered by chance a strange object which by closer inspection turned out to be a resolved edge-on circumstellar disk, so far unnoticed and displaying infrared scattered light around a young star. On this photo ( PR Photo 12a/02 ) two characteristic reflection nebulae can barely be seen, flanking a marginally resolved dark dust lane in the East-West direction in front of the star. VLT confirmation ESO PR Photo 12b/02 ESO PR Photo 12b/02 [Preview - JPEG: 437 x 430 pix - 64k] [Normal - JPEG: 873 x 800 pix - 564k] ESO PR Photo 12c/02 ESO PR Photo 12c/02 [Preview - JPEG: 400 x 468 pix - 69k] [Normal - JPEG: 800 x 935 pix - 432k] Captions : PR Photo 12b/02 shows the new object, as imaged with the ISAAC multi-mode instrument on the 8.2-m VLT ANTU telescope at Paranal during the follow-up observations. The circumstellar disk is well visible in the left part of the field as a shadow in front of the nebula. Many background galaxies are visible in this deep image and one edge-on galaxy is seen visible close to the image centre. A close-up of the object is shown in PR Photo 12c/02 . Note the reddish aspect of the upper nebula; this phenomenon is not yet fully understood. Technical information about the photos is available below. To confirm this discovery and in order to learn more about the object and the disk, the astronomers obtained additional observations (during "Director's Discretionary Time") with the 8.2-m VLT ANTU telescope. The observations were carried out in "service mode" by ESO staff, using the near-infrared multi-mode Infrared Spectrometer And Array Camera (ISAAC) - the "father" of the SOFI instrument ("Son OF Isaac"). A series of fine images was obtained on August 15, 2001, under very good observing conditions (with "seeing" of 0.4 arcsec). Now the two reflection nebulae are clearly seen ( PR Photos 12b-c/02 ), and the dark dust lane is well resolved. The leader of the group, Nicolas Grosso , recalls the first impression when seeing the true shape of the object: "That is when we looked at each other and, with one voice, immediately decided to nickname it the `Flying Saucer'!". The nature of the new object Seven young stars in the Rho Ophiuchi star-forming region are known to display similar reflection nebulae surrounding a dark lane (suggesting the presence of a dusty disk), but these objects are all still deeply embedded in the dense cores of this dark cloud. They are mostly protostars with ages of about 100,000 years, surrounded by a remnant infalling envelope. On the other hand, astronomers think that the newly found object has an age of about 1 million years and is in a more evolved stage than those in the neighboring Rho Ophiuchi star-forming region. The new disk is located at the periphery of the dark cloud and is much less obscured than the younger objects still embedded in the dense dark cloud nursery, thus allowing a much clearer view of the dust disk. The resolved circumstellar dust disk in the "Flying Saucer" has a radius of about 300 Astronomical Units (45 billion km), or 5 times the size of the orbit of Neptune (assuming the same distance as the Rho Ophiuchi star-forming cloud, 500 light-years). From model calculations, the astronomers find that it is inclined only about 4° to the line of sight and therefore seen very nearly from the side. A lower limit to the total mass of the disk is about twice the mass of planet Jupiter, or 600-700 times the mass of the Earth. A study of the recorded (reflected) light from the optical to the near-infrared indicates that the central young solar-type star has a temperature of about 3000 K and 0.4 times the luminosity of our actual Sun. A detailed analysis of both reflection nebulae shows an unusual excess of infrared light from the upper nebula, both visible in the NTT and VLT images, which cannot be explained by a simple axisymmetrical model. Future complementary high-resolution observations by the VLT adaptive optics camera NAOS-CONICA will help the astronomers to understand the origin of this puzzling phenomenon, and its possible link to the planet-forming mechanism. Said Nicolas Grosso : "The `Flying Saucer' object presents us with a striking portrait of our Solar System in its early infancy. With this object, Nature has provided us a perfect laboratory for the study of both dust and gas in young circumstellar disks, the raw material of planets." The next steps As this disk is located at a dark cloud periphery and not embedded in it, follow-up studies at millimetre wavelengths with existing antenna arrays will give a clear view without the complication of unrelated background emission from dark cloud material. These future observations will provide an easy mapping of the gas and dust material around this young solar-type star, and allow a study of the chemical processes at work in this protoplanetary disk. Moreover, current antenna arrays should be able to detect the Keplerian rotation of this disk, providing a direct measurement of the mass of the central star. Computer simulations predict that baby planets produce measurable structural changes in circumstellar disks, however such signs of the planet formation are far from the sensitivity and the spatial resolution of the actual antenna arrays. The detection of these features are the goal of ALMA , and there is no doubt that this "planet nursery" object will be a prime target for this future array of antennas. More information The results described in this Press Release have been submitted to the European research journal Astronomy & Astrophysics ("The `Flying Saucer': a new edge-on circumstellar dust disk at the periphery of the rho Ophiuchi dark cloud" by N. Grosso and co-authors). Notes [1]: The team consists of Nicolas Grosso (Max-Planck-Institut für extraterrestrische Physik, Garching, Germany), João Alves (ESO, Garching, Germany), Kenneth Wood (School of Physics & Astronomy, University of St Andrews, Scotland, UK), Ralph Neuhäuser (Max-Planck-Institut für extraterrestrische Physik, Garching, Germany), Thierry Montmerle (Service d'Astrophysique, CEA Saclay,Gif-sur-Yvette, France) and Jon E. Bjorkman (Ritter Observatory, Department of Physics & Astronomy, University of Toledo, Ohio, USA).

The mechanism of interaction of polymethacrylic acid with sodium dodecylbenzenesulfonate in aqueous solutions

NASA Astrophysics Data System (ADS)

Sachko, A. V.; Zakordonskii, V. P.; Voloshinovskii, A. S.; Golod, T. Yu.

2009-07-01

A complex of physicochemical methods (light scattering, potentiometry, conductometry, viscometry, tensiometry, and fluorescence spectroscopy) were used to show the possibility of formation of intermolecular associates/complexes in systems with likely charged components. The driving forces of such interactions were analyzed and a possible scheme of complex formation between polymethacrylic acid and sodium dodecylbenzenesulfonate was suggested.

Specific plant induced biofilm formation in Methylobacterium species

PubMed Central

Rossetto, Priscilla B.; Dourado, Manuella N.; Quecine, Maria C.; Andreote, Fernando D.; Araújo, Welington L.; Azevedo, João L.; Pizzirani-Kleiner, Aline A.

2011-01-01

Two endophytic strains of Methylobacterium spp. were used to evaluate biofilm formation on sugarcane roots and on inert wooden sticks. Results show that biofilm formation is variable and that plant surface and possibly root exudates have a role in Methylobacterium spp. host recognition, biofilm formation and successful colonization as endophytes. PMID:24031703

PLANETESIMAL FORMATION IN MAGNETOROTATIONALLY DEAD ZONES: CRITICAL DEPENDENCE ON THE NET VERTICAL MAGNETIC FLUX

DOE Office of Scientific and Technical Information (OSTI.GOV)

Okuzumi, Satoshi; Hirose, Shigenobu, E-mail: okuzumi@nagoya-u.jp

Turbulence driven by magnetorotational instability (MRI) affects planetesimal formation by inducing diffusion and collisional fragmentation of dust particles. We examine conditions preferred for planetesimal formation in MRI-inactive 'dead zones' using an analytic dead-zone model based on our recent resistive MHD simulations. We argue that successful planetesimal formation requires not only a sufficiently large dead zone (which can be produced by tiny dust grains) but also a sufficiently small net vertical magnetic flux (NVF). Although often ignored, the latter condition is indeed important since the NVF strength determines the saturation level of turbulence in MRI-active layers. We show that direct collisionalmore » formation of icy planetesimal across the fragmentation barrier is possible when the NVF strength is lower than 10 mG (for the minimum-mass solar nebula model). Formation of rocky planetesimals via the secular gravitational instability is also possible within a similar range of the NVF strength. Our results indicate that the fate of planet formation largely depends on how the NVF is radially transported in the initial disk formation and subsequent disk accretion processes.« less

Influence of computational domain size on the pattern formation of the phase field crystals

NASA Astrophysics Data System (ADS)

Starodumov, Ilya; Galenko, Peter; Alexandrov, Dmitri; Kropotin, Nikolai

2017-04-01

Modeling of crystallization process by the phase field crystal method (PFC) represents one of the important directions of modern computational materials science. This method makes it possible to research the formation of stable or metastable crystal structures. In this paper, we study the effect of computational domain size on the crystal pattern formation obtained as a result of computer simulation by the PFC method. In the current report, we show that if the size of a computational domain is changed, the result of modeling may be a structure in metastable phase instead of pure stable state. The authors present a possible theoretical justification for the observed effect and provide explanations on the possible modification of the PFC method to account for this phenomenon.

Spectral images browsing using principal component analysis and set partitioning in hierarchical tree

NASA Astrophysics Data System (ADS)

Ma, Long; Zhao, Deping

2011-12-01

Spectral imaging technology have been used mostly in remote sensing, but have recently been extended to new area requiring high fidelity color reproductions like telemedicine, e-commerce, etc. These spectral imaging systems are important because they offer improved color reproduction quality not only for a standard observer under a particular illuminantion, but for any other individual exhibiting normal color vision capability under another illuminantion. A possibility for browsing of the archives is needed. In this paper, the authors present a new spectral image browsing architecture. The architecture for browsing is expressed as follow: (1) The spectral domain of the spectral image is reduced with the PCA transform. As a result of the PCA transform the eigenvectors and the eigenimages are obtained. (2) We quantize the eigenimages with the original bit depth of spectral image (e.g. if spectral image is originally 8bit, then quantize eigenimage to 8bit), and use 32bit floating numbers for the eigenvectors. (3) The first eigenimage is lossless compressed by JPEG-LS, the other eigenimages were lossy compressed by wavelet based SPIHT algorithm. For experimental evalution, the following measures were used. We used PSNR as the measurement for spectral accuracy. And for the evaluation of color reproducibility, ΔE was used.here standard D65 was used as a light source. To test the proposed method, we used FOREST and CORAL spectral image databases contrain 12 and 10 spectral images, respectively. The images were acquired in the range of 403-696nm. The size of the images were 128*128, the number of bands was 40 and the resolution was 8 bits per sample. Our experiments show the proposed compression method is suitable for browsing, i.e., for visual purpose.

Watermarking scheme for authentication of compressed image

NASA Astrophysics Data System (ADS)

Hsieh, Tsung-Han; Li, Chang-Tsun; Wang, Shuo

2003-11-01

As images are commonly transmitted or stored in compressed form such as JPEG, to extend the applicability of our previous work, a new scheme for embedding watermark in compressed domain without resorting to cryptography is proposed. In this work, a target image is first DCT transformed and quantised. Then, all the coefficients are implicitly watermarked in order to minimize the risk of being attacked on the unwatermarked coefficients. The watermarking is done through registering/blending the zero-valued coefficients with a binary sequence to create the watermark and involving the unembedded coefficients during the process of embedding the selected coefficients. The second-order neighbors and the block itself are considered in the process of the watermark embedding in order to thwart different attacks such as cover-up, vector quantisation, and transplantation. The experiments demonstrate the capability of the proposed scheme in thwarting local tampering, geometric transformation such as cropping, and common signal operations such as lowpass filtering.

Chemistry Comes Alive! Vol. 3: Abstract of Special Issue 23 on CD-ROM

NASA Astrophysics Data System (ADS)

Jacobsen, Jerrold J.; Moore, John W.

1999-09-01

Literature Cited

1. Jacobsen, J. J.; Moore, J. W. Chemistry Comes Alive! Vol. 1 [CD-ROM]; J. Chem. Educ. Software 1998, SP 18.

2. Jacobsen, J. J.; Moore, J. W. Chemistry Comes Alive! Vol. 2 [CD-ROM]; J. Chem. Educ. Software 1998, SP 21.

3. Moore, J. W.; Jacobsen, J. J.; Hunsberger, L. R.; Gammon, S. D.; Jetzer, K. H.; Zimmerman, J. ChemDemos Videodisc; J. Chem. Educ. Software 1994, SP 8.

4. Moore, J. W.; Jacobsen, J. J.; Jetzer, K. H.; Gilbert, G.; Mattes, F.; Phillips, D.; Lisensky, G.; Zweerink, G. ChemDemos II; J. Chem. Educ. Software 1996, SP 14.

5. Jacobsen, J. J.; Jetzer, K. H.; Patani, N.; Zimmerman, J. Titration Techniques Videodisc; J. Chem. Educ. Software 1995, SP9.

Baseline coastal oblique aerial photographs collected from Dauphin Island, Alabama, to Breton Island, Louisiana, June 9, 2011

USGS Publications Warehouse

Morgan, Karen L. M.

2017-04-03

The U.S. Geological Survey (USGS), as part of the National Assessment of Storm-Induced Coastal Change Hazards project, conducts baseline and storm-response photography missions to document and understand the changes in vulnerability of the Nation's coasts to extreme storms. On June 9, 2011, the USGS conducted an oblique aerial photographic survey from Dauphin Island, Alabama, to Breton Island, Louisiana, aboard a Beechcraft BE90 King Air (aircraft) at an altitude of 500 feet (ft) (152 meters (m)) and approximately 1,200 ft (366 m) offshore. This mission was conducted to collect baseline data for assessing incremental changes in the beach and nearshore area and can be used to assess future coastal change.The photographs in this report are Joint Photographic Experts Group (JPEG) images. These photographs document the state of the barrier islands and other coastal features at the time of the survey.

High-fidelity data embedding for image annotation.

PubMed

He, Shan; Kirovski, Darko; Wu, Min

2009-02-01

High fidelity is a demanding requirement for data hiding, especially for images with artistic or medical value. This correspondence proposes a high-fidelity image watermarking for annotation with robustness to moderate distortion. To achieve the high fidelity of the embedded image, we introduce a visual perception model that aims at quantifying the local tolerance to noise for arbitrary imagery. Based on this model, we embed two kinds of watermarks: a pilot watermark that indicates the existence of the watermark and an information watermark that conveys a payload of several dozen bits. The objective is to embed 32 bits of metadata into a single image in such a way that it is robust to JPEG compression and cropping. We demonstrate the effectiveness of the visual model and the application of the proposed annotation technology using a database of challenging photographic and medical images that contain a large amount of smooth regions.

DCTune Perceptual Optimization of Compressed Dental X-Rays

NASA Technical Reports Server (NTRS)

Watson, Andrew B.; Null, Cynthia H. (Technical Monitor)

1997-01-01

In current dental practice, x-rays of completed dental work are often sent to the insurer for verification. It is faster and cheaper to transmit instead digital scans of the x-rays. Further economies result if the images are sent in compressed form. DCtune is a technology for optimizing DCT quantization matrices to yield maximum perceptual quality for a given bit-rate, or minimum bit-rate for a given perceptual quality. In addition, the technology provides a means of setting the perceptual quality of compressed imagery in a systematic way. The purpose of this research was, with respect to dental x-rays: (1) to verify the advantage of DCTune over standard JPEG; (2) to verify the quality control feature of DCTune; and (3) to discover regularities in the optimized matrices of a set of images. Additional information is contained in the original extended abstract.

A visual detection model for DCT coefficient quantization

NASA Technical Reports Server (NTRS)

Ahumada, Albert J., Jr.; Peterson, Heidi A.

1993-01-01

The discrete cosine transform (DCT) is widely used in image compression, and is part of the JPEG and MPEG compression standards. The degree of compression, and the amount of distortion in the decompressed image are determined by the quantization of the transform coefficients. The standards do not specify how the DCT coefficients should be quantized. Our approach is to set the quantization level for each coefficient so that the quantization error is at the threshold of visibility. Here we combine results from our previous work to form our current best detection model for DCT coefficient quantization noise. This model predicts sensitivity as a function of display parameters, enabling quantization matrices to be designed for display situations varying in luminance, veiling light, and spatial frequency related conditions (pixel size, viewing distance, and aspect ratio). It also allows arbitrary color space directions for the representation of color.