Estonia Country Analysis Brief
2015-01-01
Since restoring its independence in 1991, Estonia has fully liberalized its electricity and gas markets. The strengthening of the Baltic electricity market, integration with the Nordic market, and the establishment of a regional gas market are priorities for Estonia.
Moks, E; Jõgisalu, I; Saarma, U; Talvik, H; Järvis, T; Valdmann, H
2006-04-01
Carcasses of 26 wolves were collected during the 2000/2001 and 2003/2004 hunting seasons and examined for helminths. Thirteen helminth species were recorded: one trematode (Alaria alata), seven cestodes (Diphyllobothrium latum, Mesocestoides lineatus, Taenia hydatigena, Taenia multiceps, Taenia ovis, Taenia pisiformis, and Echinococcus granulosus), and five nematode species (Uncinaria stenocephala, Toxascaris leonina, Toxocara canis, Trichinella nativa, and Trichinella britovi). The most common species were A. alata and U. stenocephala. Mature Echinococcus granulosus was found and described for the first time in Estonia, and its identity verified using PCR-RFLP analysis. Sequencing a fragment of the mitochondrial DNA NADH dehydrogenase 1 (mtND1) gene showed that the E. granulosus strain from Estonia was identical to strain G10, recently characterized in reindeer and moose in Finland.
Nurmoja, I; Petrov, A; Breidenstein, C; Zani, L; Forth, J H; Beer, M; Kristian, M; Viltrop, A; Blome, S
2017-12-01
Due to its impact on animal health and pig industry, African swine fever (ASF) is regarded as one of the most important viral diseases of pigs. Following the ongoing epidemic in the Transcaucasian countries and the Russian Federation, African swine fever virus was introduced into the Estonian wild boar population in 2014. Epidemiological investigations suggested two different introductions into the southern and the north-eastern part of Estonia. Interestingly, outbreak characteristics varied considerably between the affected regions. While high mortality and mainly virus-positive animals were observed in the southern region, mortality was low in the north-eastern area. In the latter, clinically healthy, antibody-positive animals were found in the hunting bag and detection of virus was rare. Two hypotheses could explain the different behaviour in the north-east: (i) the frequency of antibody detections combined with the low mortality is the tail of an older, so far undetected epidemic wave coming from the east, or (ii) the virus in this region is attenuated and leads to a less severe clinical outcome. To explore the possibility of virus attenuation, a re-isolated ASFV strain from the north-eastern Ida-Viru region was biologically characterized in European wild boar. Oronasal inoculation led to an acute and severe disease course in all animals with typical pathomorphological lesions. However, one animal recovered completely and was subsequently commingled with three sentinels of the same age class to assess disease transmission. By the end of the trial at 96 days post-initial inoculation, all animals were completely healthy and neither virus nor viral genomes were detected in the sentinels or the survivor. The survivor, however, showed high antibody levels. In conclusion, the ASFV strain from north-eastern Estonia was still highly virulent but nevertheless, one animal recovered completely. Under the experimental conditions, no transmission occurred from the survivor
Brandänge, Kristina; Gustavsson, J. Petter
2000-01-01
Just after midnight on the 28th of September 1994, the Estonian-flagged ro-ro passenger ferry MV Estonia was shipwrecked on its route between Tallinn and Stockholm. Out of about 1000 persons on board only 137 survived. This paper describes the work that the Psychiatric Clinic at Ersta Hospital performed with the relatives of the MV Estonia victims after the disaster, in addition, we present data from seven consecutive Swedish nationwide surveys based on a questionnaire, which started as a correspondence between the hospital and the relatives of the Estonia victims. Findings concerning the care relatives received and issues regarding their collaboration with the decisionmaking authorities are presented. The importance of inviting the relatives to participate in discussions concerning the Estonia victims is stressed. PMID:22034392
Cliquet, Florence; Robardet, Emmanuelle; Must, Kylli; Laine, Marjana; Peik, Katrin; Picard-Meyer, Evelyne; Guiot, Anne-Laure; Niin, Enel
2012-01-01
The compulsory vaccination of pets, the recommended vaccination of farm animals in grazing areas and the extermination of stray animals did not succeed in eliminating rabies in Estonia because the virus was maintained in two main wildlife reservoirs, foxes and raccoon dogs. These two species became a priority target therefore in order to control rabies. Supported by the European Community, successive oral vaccination (OV) campaigns were conducted twice a year using Rabigen® SAG2 baits, beginning in autumn 2005 in North Estonia. They were then extended to the whole territory from spring 2006. Following the vaccination campaigns, the incidence of rabies cases dramatically decreased, with 266 cases in 2005, 114 in 2006, four in 2007 and three in 2008. Since March 2008, no rabies cases have been detected in Estonia other than three cases reported in summer 2009 and one case in January 2011, all in areas close to the South-Eastern border with Russia. The bait uptake was satisfactory, with tetracycline positivity rates ranging from 85% to 93% in foxes and from 82% to 88% in raccoon dogs. Immunisation rates evaluated by ELISA ranged from 34% to 55% in foxes and from 38% to 55% in raccoon dogs. The rabies situation in Estonia was compared to that of the other two Baltic States, Latvia and Lithuania. Despite regular OV campaigns conducted throughout their territory since 2006, and an improvement in the epidemiological situation, rabies has still not been eradicated in these countries. An analysis of the number of baits distributed and the funding allocated by the European Commission showed that the strategy for rabies control is more cost-effective in Estonia than in Latvia and Lithuania. PMID:22393461
Estonia--Going Home Again: Returning to the Roots.
ERIC Educational Resources Information Center
Pedak-Kari, Maria
This paper provides background on The National Library of Estonia (NLE), discusses a fellowship project for developing the National Library, and presents the impressions of the author, an Estonian American, who traveled to Estonia. The NLE looks to the West for automation, information, and institutional modeling. The NLE is Estonia's equivalent of…
Astronomy in the society and culture of Estonia
NASA Astrophysics Data System (ADS)
Leedjärv, Laurits
2011-06-01
History and present state of astronomy in a small North-Eastern European country are considered. There is a rather big number (about 35) of professional astronomers in Estonia, including 21 IAU members. Through some outstanding persons, astronomy in Estonia has significant relations with the society. The same can be said about the culture. Well-developed astronomy has contributed into the cooperation of Estonia with the European Space Agency, and thus, has an indirect effect to the country's economy.
Zetterberg, Veera; Ustina, Valentina; Liitsola, Kirsi; Zilmer, Kai; Kalikova, Nelli; Sevastianova, Ksenia; Brummer-Korvenkontio, Henrikki; Leinikki, Pauli; Salminen, Mika O
2004-11-01
HIV-1 infection has been rare in Estonia. In 2000, an explosive epidemic among injecting drug users was detected in the Eastern border region, resulting in 3603 newly reported cases by the end of 2003. The molecular epidemiology of the outbreak was studied to establish whether the Estonian epidemic is linked to the epidemics in Eastern Europe. Over 200 newly infected individuals were prospectively sampled from June 2000 to March 2002 in a geographically representative way, with known dates of diagnosis and information of probable route of transmission. Viral regions coding for two viral gene regions were directly sequenced from plasma viral RNA and phylogenetically analyzed. In addition, a larger region coding for the entire env gene was sequenced from one sample and studied for indications of possible recombinant structure. The Estonian HIV outbreak was found to be caused by simultaneous introduction of two strains: a minor subtype A strain very similar to the Eastern European subtype A strain (approximately 8% of cases), and a second major strain (77%) found to be most closely related to the CRF06-cpx strain, previously described only from African countries. The variability in the two clusters was very low, suggesting point source introductions. Ten percent of cases seemed to be newly generated recombinants of the A and CRF06-cpx strains. Analysis of viral diversification over time revealed a rate of change within the V3 region of 0.83%/year for the CRF06-cpx strain, consistent with findings from other subtypes. Due to the relatively frequently found novel recombinant forms, the Estonian HIV-1 epidemic may allow studies of coinfection and intersubtype recombination in detail.
Shipitsyna, Elena; Rumyantseva, Tatiana; Golparian, Daniel; Khayrullina, Guzel; Lagos, Amaya C.; Edelstein, Inna; Joers, Kai; Jensen, Jörgen S.; Savicheva, Alevtina; Rudneva, Natalia; Sukhanova, Larisa; Kozlov, Roman; Guschin, Alexander
2017-01-01
Background and objective Resistance in the sexually transmitted bacterium Mycoplasma genitalium to all recommended therapeutic antimicrobials have rapidly emerged. However, to date, internationally reported resistance surveillance data for M. genitalium strains circulating in Eastern Europe are entirely lacking. The aim of this study was to estimate the prevalence of macrolide and fluoroquinolone resistance-associated mutations in M. genitalium in four cities in Russia and one in Estonia, 2013–2016. Materials and methods Consecutive urogenital samples found positive for M. genitalium during diagnostic testing were retrospectively analyzed for resistance-associated mutations in the 23S rRNA and parC genes using pyrosequencing and conventional Sanger sequencing, respectively. Results In total, 867 M. genitalium positive samples from 2013–2016 were analyzed. Macrolide resistance-associated mutations were detected in 4.6% of the samples from Russia (0.7–6.8% in different cities) and in 10% of the samples from Estonia. The mutations A2059G and A2058G were highly predominating in both Russia and Estonia, accounting together for 90.9% of the cases positive for nucleotide substitutions in the 23S rRNA gene. The rates of possible fluoroquinolone resistance-associated mutations were 6.2% in Russia (2.5–7.6% in different cities) and 5% in Estonia. The mutations S83I and S83N were the most frequent ones in Russia (24.4% each), whereas D87N highly predominated in Estonia (83.3% of all fluoroquinolone resistance-associated mutations). Approximately 1% of the samples in both countries harbored both macrolide and possible fluoroquinolone resistance-associated mutations, with A2058G and S83I being the most frequent combination (37.5%). Conclusions The prevalence of macrolide and fluoroquinolone resistance-associated mutations in M. genitalium was 4.6% and 6.2%, respectively, in Russia, and 10% and 5%, respectively, in Estonia. Despite the relatively low rates of macrolide
Shipitsyna, Elena; Rumyantseva, Tatiana; Golparian, Daniel; Khayrullina, Guzel; Lagos, Amaya C; Edelstein, Inna; Joers, Kai; Jensen, Jörgen S; Savicheva, Alevtina; Rudneva, Natalia; Sukhanova, Larisa; Kozlov, Roman; Guschin, Alexander; Unemo, Magnus
2017-01-01
Resistance in the sexually transmitted bacterium Mycoplasma genitalium to all recommended therapeutic antimicrobials have rapidly emerged. However, to date, internationally reported resistance surveillance data for M. genitalium strains circulating in Eastern Europe are entirely lacking. The aim of this study was to estimate the prevalence of macrolide and fluoroquinolone resistance-associated mutations in M. genitalium in four cities in Russia and one in Estonia, 2013-2016. Consecutive urogenital samples found positive for M. genitalium during diagnostic testing were retrospectively analyzed for resistance-associated mutations in the 23S rRNA and parC genes using pyrosequencing and conventional Sanger sequencing, respectively. In total, 867 M. genitalium positive samples from 2013-2016 were analyzed. Macrolide resistance-associated mutations were detected in 4.6% of the samples from Russia (0.7-6.8% in different cities) and in 10% of the samples from Estonia. The mutations A2059G and A2058G were highly predominating in both Russia and Estonia, accounting together for 90.9% of the cases positive for nucleotide substitutions in the 23S rRNA gene. The rates of possible fluoroquinolone resistance-associated mutations were 6.2% in Russia (2.5-7.6% in different cities) and 5% in Estonia. The mutations S83I and S83N were the most frequent ones in Russia (24.4% each), whereas D87N highly predominated in Estonia (83.3% of all fluoroquinolone resistance-associated mutations). Approximately 1% of the samples in both countries harbored both macrolide and possible fluoroquinolone resistance-associated mutations, with A2058G and S83I being the most frequent combination (37.5%). The prevalence of macrolide and fluoroquinolone resistance-associated mutations in M. genitalium was 4.6% and 6.2%, respectively, in Russia, and 10% and 5%, respectively, in Estonia. Despite the relatively low rates of macrolide and fluoroquinolone resistance in these countries, antimicrobial resistance
Background Study on Employment and Labour Market in Estonia.
ERIC Educational Resources Information Center
Eamets, Raul; Philips, Kaia; Annus, Tiina
During the years 1989-1997 in Estonia, employment has decreased; unemployment and inactivity have increased. Females have tended to move to inactivity while males have become unemployed. The wage patterns are very flat relative to those in market economies. Estonia has opted for very low levels of unemployment benefits, pensions, and a low minimum…
Sexually transmitted infections in Estonia.
Põder, A; Bingham, J S
1999-10-01
Estonia, one of the Baltic countries, regained its independence in 1991, after the collapse of the USSR. This process led to great changes in every sphere of life--in politics, in the economy and in medicine. The service providing care for sexually transmitted infections (STIs) was involved in the process of these changes, too. However, freedom was followed not only by great happiness, but also by social destabilization and transformation of the old moral norms, the most evident features of which were the dramatic rise in crime, a sexual revolution and public prostitution. These 2 great simultaneous transformations in the STI care system and public mores led to the rapid increase of STIs in Estonia in the first half of the 1990s. Now some stabilization, and even a fall in incidence has occurred.
Education Policy Outlook: Estonia
ERIC Educational Resources Information Center
Fraccola, Sylvain; Field, Simon; Figueroa, Diana Toledo; Peterka, Judith; Jankova, Bojana; Golden, Gillian
2016-01-01
This policy profile on education in Estonia is part of the "Education Policy Outlook" series, which presents comparative analysis of education policies and reforms across OECD countries. Building on the OECD's substantial comparative and sectoral knowledge base, the series offers a comparative outlook on education policy by providing…
Geography Olympiads in Estonia
ERIC Educational Resources Information Center
Liiber, Ulle; Roosaare, Juri
2007-01-01
The Olympiad movement has a long history in Estonia, and the national system developed several decades ago. The first Olympiad for gifted and talented students was held in mathematics in 1950. Now there are more than 20 different fields of competition for basic school and gymnasium students. In 2005/2006, Estonian teams participated in 18…
The Affective Dimension of Religion and Personal Happiness among Students in Estonia
ERIC Educational Resources Information Center
Francis, Leslie J.; Elken, Ahto; Robbins, Mandy
2012-01-01
A sample of 150 students in Estonia (119 from a secular university and 31 from a Lutheran theological institute) completed the Oxford Happiness Measure and the Francis Scale of Attitude toward Christianity. The data show no significant correlation between these two variables; thus the findings challenge the generalizability to Estonia of the…
NASA Astrophysics Data System (ADS)
Kaasik, Helle
2015-12-01
The situation of women in education, work, and research in Estonia is relatively good. Nevertheless, science (especially engineering) remains a male-dominated field. The total number of female scientists and engineers in the workforce is about two-thirds that of males. Moreover, the gender imbalance in the researcher population increases with age. Significant pay-gap and power imbalances between the genders remain both in Estonian society in general and in the fields of science and technology. In many practical situations, behavior of both men and women is still guided by gender stereotypes.
HYPEST study: profile of hypertensive patients in Estonia
2011-01-01
Background More than one third of adult population in Estonia has problems with elevated blood pressure (BP). The Hypertension in Estonia (HYPEST) study represents the country's first hypertension-targeted sample collection aiming to examine the epidemiological and genetic determinants for hypertension (HTN) and related cardiovascular diseases (CVD) in Estonian population. The HYPEST subjects (n = 1,966) were recruited across Estonia between 2004-2007 including clinically diagnosed HTN cases and population-based controls. The present report is focused on the clinical and epidemiological profile of HYPEST cases, and gender-specific effects on the pathophysiology of hypertension. Methods Current analysis was performed on 1,007 clinically diagnosed HTN patients (617 women and 390 men) aged 18-85 years. The hypertensives were recruited to the study by BP specialists at the North Estonia Medical Center, Centre of Cardiology, Tallinn or at the Cardiology Clinic, Tartu University Hospital, Estonia. Longitudinal BP data was extracted retrospectively from clinical records. Current and retrospective data of patient's medical history, medication intake and lifestyle habits were derived from self-administrated questionnaire and each variable was examined separately for men and women. Eleven biochemical parameters were measured from fasting serum samples of 756 patients. Results The distribution of recruited men and women was 39% and 61% respectively. Majority of Estonian HTN patients (85%) were overweight (BMI ≥ 25 kg/m2) and a total of 79% of patients had additional complications with cardiovascular system. In men, the hypertension started almost 5 years earlier than in women (40.5 ± 14.5 vs 46.1 ± 12.7 years), which led to earlier age of first myocardial infarction (MI) and overall higher incidence rate of MI among male patients (men 21.2%, women 8.9%, P < 0.0001). Heart arrhythmia, thyroid diseases, renal tubulo-intestinal diseases and hyperlipidemia were more prevalent
Feasibility of cohort studies in Estonia
Innos, K.; Rahu, M.; Rahu, K.
1999-01-01
OBJECTIVES: To describe the methodology and feasibility of follow up for vital status in retrospective cohort studies in Estonia. METHODS: A cohort of 7412 workers who had been employed at two factories in Tallinn between 1946 and 1988 was followed up for vital status from the date of first employment until death, emigration, or the end of the study, 31 December 1995, whichever occurred first. The cohort was electronically linked with the National Population Registry of Estonia that was created in 1992 and includes personal identification numbers of Estonian citizens and residents, and the Mortality Database that contains information from death certificates issued in 1983-95. A manual search was carried out on several non-computerised population data sources and archives. RESULTS: By 31 December 1995, the vital status of 6780 (91.5%) subjects could be traced (4495 (60.6%) subjects were alive, 1993 (26.9%) had died, and 292 (3.9%) had emigrated). Analysis by calendar period of leaving work showed that the proportion of subjects traced was lowest in the group of workers who had left work between 1946 and 1955 (58.4%), especially those whose age at leaving work was < 30 (53.2%) or > 60 years (42.3%). Among subjects who left work in 1956-65, 1966-75, and 1976-88, the follow up rate was 84.7%, 94.6%, and 98.2%, respectively. CONCLUSIONS: The findings, which are especially important for occupational epidemiology, confirm the feasibility of conducting retrospective cohort studies in Estonia. Most of the issues discussed in the paper apply to other former Soviet countries. PMID:10472323
Digoxin: use pattern in Estonia and bioavailability of the local market leader.
Pähkla, R; Irs, A; Oselin, K; Rootslane, L
1999-10-01
In comparison with neighbouring Scandinavian countries, the use of digoxin in Estonia is high. The present study was carried out to determine the use pattern of digoxin in Estonia and bioavailability of the local market leader preparation in comparison with Lanoxin. Drug use data were evaluated from the annual reports of wholesale companies. For the bioequivalence study, a single-blind cross-over randomised two-way single-dose comparative bioavailability study was performed using 14 healthy volunteers. Digoxin concentrations in serum samples and urine were measured by chemiluminescent competitive immunoassay. The use of digoxin in Estonia has increased by 35% during the period 1994-97. The steady market leader was the local generic drug. No statistically significant differences were found in any pharmacokinetic parameter between the generic preparation and Lanoxin. All parameters showed considerable variability. The total amount of drug excreted was the parameter with lowest inter- individual variation. The present study indicates that the generic digoxin preparation studied is bioequivalent to Lanoxin. The increasing use of digoxin in Estonia is not caused by low bioavailability of the local market leader but by therapeutic traditions.
Children's Perspective on Learning: An International Study in Denmark, Estonia, Germany and Sweden
ERIC Educational Resources Information Center
Sandberg, Anette; Broström, Stig; Johansson, Inge; Frøkjaer, Thorleif; Kieferle, Christa; Seifert, Anja; Roth, Angela; Tuul, Maire; Ugaste, Aino; Laan, Meeli
2017-01-01
This article explores how some children in Denmark, Estonia, Germany and Sweden describe their perspective on learning. The aim of the international study is to gain knowledge of how preschool children in Sweden, Denmark, Estonia and Germany reflect and perceive their learning in preschool and other surrounding social contexts. The results are…
Gross, Marit; Volmer, Daisy
2016-04-19
From 2020, the ownership of community pharmacies in Estonia will be limited to the pharmacy profession, and the vertical integration of wholesale companies and community pharmacies will not be allowed. The aim of this study was to evaluate the perception of different stakeholders in primary healthcare toward the new regulations of the community pharmacy sector in Estonia. A qualitative electronic survey was distributed to the main stakeholders in primary healthcare and higher education institutions providing pharmacy education ( n = 40) in May 2015. For data analysis, the systematic text condensation method was used. The study participants described two opposing positions regarding the development of community pharmacies in the future. Reform supporters emphasized increased professional independence and more healthcare-oriented operation of community pharmacies. Reform opponents argued against these ideas as community pharmacists do not have sufficient practical experience and finances to ensure sustainable development of the community pharmacy sector in Estonia. Based on the current perception of all respondents, the future operation of the community pharmacy sector in Estonia is unclear and there is urgent need for implementation criteria for the new regulations.
OECD Reviews of School Resources: Estonia
ERIC Educational Resources Information Center
Santiago, Paulo; Levitas, Anthony; Radó, Péter; Shewbridge, Claire
2016-01-01
This report for Estonia forms part of the OECD Review of Policies to Improve the Effectiveness of Resource Use in Schools. The purpose of the review is to explore how school resources can be governed, distributed, utilised and managed to improve the quality, equity and efficiency of school education. School resources are understood in a broad way,…
National Testing of Pupils in Europe: Objectives, Organisation and Use of Results. Estonia 2009
ERIC Educational Resources Information Center
Mere, Kristi
2009-01-01
Estonia restored its independence in 1991. The creation of legislation and reorganisation of the educational system was one of the first tasks of the restored Republic of Estonia. The development of the national curriculum for basic and upper secondary schools that provided a framework substituting the previous study modules, and the creation of…
Attitudes of Major Soviet Nationalities. Volume II. The Baltics. Estonia, Latvia, Lithuania.
1973-06-01
acquired wide popularity (and probably snob appeal ). Kafka, Ionesco and Dostoyevsky were available to Soviet Estonians earlier than to the Russian reading...Estonia . chided as snob appeal ). Of Estonia’s 757 general schools, 556 (i.e. 71) use Estonian, 90 use Russian and 60 are mixed. 2 The same applies to...novels whicr combine literary quality with national appeal ro 2 ’), collective farm realism at its best (M. Traatl), realisti> lezcription of city life
Stakeholder Perspectives: CLIL Programme Management in Estonia
ERIC Educational Resources Information Center
Mehisto, Peeter; Asser, Hiie
2007-01-01
In 2000, Estonia launched a voluntary Estonian language CLIL programme for seven year-olds in four Russian-medium schools. The programme has expanded rapidly to a total of 48 kindergartens and schools. This paper reports on research into stakeholder perspectives on programme management. In addition to surveying parents, teachers, vice-principals…
ERIC Educational Resources Information Center
Michaels, Deborah L.; Stevick, E. Doyle
2009-01-01
How is the tension between renewed nationalist and European narratives of belonging being unfolded in the curricula, discourse, and practice of civic education in Slovakia and Estonia. As two post-socialist territories that were "reborn" as independent nation-states in the 1990s, Slovakia and Estonia were confronted with pressure to…
A feasibility study of municipal solid waste incineration fly ash utilisation in Estonia.
Berber, Hakan; Frey, Ruedi; Voronova, Viktoria; Koroljova, Arina
2017-09-01
The purpose of this paper is to discuss the alternative environmental management options for the utilisation of municipal solid waste (MSW) incineration fly ash (FA), which is generated at Iru Power Plant where MSW is incinerated in Estonia. To determine sustainable and economically feasible environmental management options for MSW incineration FA in Estonia, CO 2 sequestration with a further carbonation process was examined. A partial Cost & Benefit Analysis has been conducted to compare the carbonation process to the current situation. Two carbonation options were developed. Option 1 is to use carbonated FA in any other processes based on the waste-to-product principle. Option 2 is to send carbonated FA to the non-hazardous landfill in Tallinn, Estonia. Important parameters, such as Net Present Value (NPV), Internal Rate of Return (IRR), Benefit-Cost Ratio (BCR) and Break Even Point (BEP), have been calculated for carbonation options and the current case. In addition, a sensitivity analysis has been conducted to examine its robustness. The results showed that the best option is carbonation Option 1 with NPV of 9,209,662 EUR, IRR of 43%, BCR of 2.63 and BEP between 2018 and 2019. Both Options 1 and 2 constitute more sustainable and environmentally friendly management options compared to the current situation. It can be concluded that this preliminary feasibility study showed that running a carbonation plant may be profitable and sustainable for Estonia. Currently, there is no treatment technology for MSW incineration FA in Estonia and FA is sent to a neighbouring country for further utilisation. This is the first study to demonstrate FA management options with economic and environmental benefits.
Vocational Education and Training Reform in Estonia.
ERIC Educational Resources Information Center
European Training Foundation, Turin (Italy).
This report on vocational education and training (VET) reform in Estonia is one of a series of country reports by the European Training Foundation on the reform process in partner countries. Chapter 1 provides basic data on the country. Chapter 2 describes the present situation and recent developments in VET. It covers main features of the…
Revegetation processes and environmental conditions in abandoned peat production fields in Estonia
NASA Astrophysics Data System (ADS)
Orru, M.; Orru, H.
2009-04-01
As a result of peat extraction, peat production has been finished in Estonia at different times in 154 peat production areas and 9,500 ha (~1% of peatlands) are abandoned, although the peat reserves are not exhausted yet; besides, several areas are not properly recultivated. In addition 12,000 ha of fens (oligotrophic peat layers) are drained and used as grasslands. If the abandoned and non-recultivated peat production areas are not vegetated, their CO2 emission is considerable and peat mineralises in such areas. The aim of the study was to find out specific ecological and geological factors, which affect recovering of peatlands and influence the recultivation. During the revision the amount and quality of the remained reserves, as well as the state of water regime, drainage network and revegetation was assessed in all 154 abandoned peat production areas. The study showed that the state of them is very variable. Some of them are covered with forest, prevailingly with birches at former drainage ditches, later supplemented by pine trees. In the others predominate grasses among plants, and various species of moss (Cladonia rei, Bryum caespiticum, Sphagnum ripariuma, Sphagnum squarrosum) occur as well. Besides, some abandoned areas are completely overgrown with cotton grass. Open abandoned peat areas, which are not covered by vegetation, are much rarer. We found out, that water regime among the factors plays most important role. Moreover abandoned peat production fields, where the environmental conditions have changed - are appropriate for growth of several moss species, which cannot inhabit the areas already occupied by other species. The most interesting discovers were: second growing site of Polia elongata in West-Estonia and Ephemerum serratum, last found in Estonia in the middle of the 19th century, was identified in central Estonia. Also Campylopus introflexus, what was unknown in Estonia. However, the changes in environmental conditions influence the peat layers
Beyond Linguistic Policy: The Soviet Union Versus Estonia.
ERIC Educational Resources Information Center
Rannut, Mart
1991-01-01
Discussion of the role of non-Russian languages in the Soviet Union (USSR) focuses on the history of ethnic group languages and language policy in Estonia since the collapse of totalitarianism. A historical overview of Soviet Union language policy is offered, with attention given to the ideological goals influencing policy, and their realization…
Seasonality of alcohol-related phenomena in Estonia.
Silm, Siiri; Ahas, Rein
2005-03-01
We studied alcohol consumption and its consequences as a seasonal phenomenon in Estonia and analysed the social and environmental factors that may cause its seasonal rhythm. There are two important questions when researching the seasonality of human activities: (1) whether it is caused by natural or social factors, and (2) whether the impact of the factors is direct or indirect. Often the seasonality of social phenomena is caused by social factors, but the triggering mechanisms are related to environmental factors like temperature, precipitation, and radiation via the circannual calendar. The indicators of alcohol consumption in the current paper are grouped as: (1) pre-consumption phenomena, i.e. production, tax and excise, sales (beer, wine and vodka are analysed separately), and (2) post-consumption phenomena, i.e. alcohol-related crime and traffic accidents and the number of people detained in lockups and admitted to alcohol treatment clinics. In addition, seasonal variability in the amount of alcohol advertising has been studied, and a survey has been carried out among 87 students of Tartu University. The analysis shows that different phenomena related to alcohol have a clear seasonal rhythm in Estonia. The peak period of phenomena related to beer is in the summer, from June to August and the low point is during the first months of the year. Beer consumption correlates well with air temperature. The consumption of vodka increases sharply at the end of the year and in June; the production of vodka does not have a significant correlation with negative temperatures. The consumption of wine increases during summer and in December. The consequences of alcohol consumption, expressed as the rate of traffic accidents or the frequency of medical treatment, also show seasonal variability. Seasonal variability of alcohol consumption in Estonia is influenced by natural factors (temperature, humidity, etc.) and by social factors (celebrations, vacations, etc.). However
Seasonality of alcohol-related phenomena in Estonia
NASA Astrophysics Data System (ADS)
Silm, Siiri; Ahas, Rein
2005-03-01
We studied alcohol consumption and its consequences as a seasonal phenomenon in Estonia and analysed the social and environmental factors that may cause its seasonal rhythm. There are two important questions when researching the seasonality of human activities: (1) whether it is caused by natural or social factors, and (2) whether the impact of the factors is direct or indirect. Often the seasonality of social phenomena is caused by social factors, but the triggering mechanisms are related to environmental factors like temperature, precipitation, and radiation via the circannual calendar. The indicators of alcohol consumption in the current paper are grouped as: (1) pre-consumption phenomena, i.e. production, tax and excise, sales (beer, wine and vodka are analysed separately), and (2) post-consumption phenomena, i.e. alcohol-related crime and traffic accidents and the number of people detained in lockups and admitted to alcohol treatment clinics. In addition, seasonal variability in the amount of alcohol advertising has been studied, and a survey has been carried out among 87 students of Tartu University. The analysis shows that different phenomena related to alcohol have a clear seasonal rhythm in Estonia. The peak period of phenomena related to beer is in the summer, from June to August and the low point is during the first months of the year. Beer consumption correlates well with air temperature. The consumption of vodka increases sharply at the end of the year and in June; the production of vodka does not have a significant correlation with negative temperatures. The consumption of wine increases during summer and in December. The consequences of alcohol consumption, expressed as the rate of traffic accidents or the frequency of medical treatment, also show seasonal variability. Seasonal variability of alcohol consumption in Estonia is influenced by natural factors (temperature, humidity, etc.) and by social factors (celebrations, vacations, etc.). However
ERIC Educational Resources Information Center
Skerrett, Delaney Michael
2016-01-01
This study investigates "de facto" language policy in Estonia. It investigates how language choices at the micro (or individual) level are negotiated within the macro (or social and historical) context: how official language policy and other features of the discursive environment surrounding language and its use in Estonia translate into…
The social costs of alcohol misuse in Estonia.
Saar, Indrek
2009-01-01
The aim of this study was to estimate the social costs of alcohol misuse in Estonia in 2006. Using a prevalence-based cost-of-illness approach, both direct and indirect costs were considered, including tangible costs associated with health care, criminal justice, rescue services, damage to property, premature mortality, incarceration, incapability of working due to illnesses, and lower labor productivity. The results show that alcohol misuse cost Estonia more than EUR 200 million in 2006. The costs involved are estimated to represent 1.6% of the gross domestic product (GDP), which is relatively high in comparison with many other countries. In addition, the state receives less receipts from the alcohol excise tax than the costs that it incurs as a consequence of alcohol misuse, which points to the existence of economic inefficiency with respect to the alcohol market. The results of this study suggest that there is definitely a need for further cost-benefit analysis to reach a conclusion regarding the possible utility of government intervention. Copyright 2008 S. Karger AG, Basel.
Reducing exposure to high fluoride drinking water in Estonia-a countrywide study.
Indermitte, Ene; Saava, Astrid; Karro, Enn
2014-03-14
Fluoride is a naturally occurring contaminant in groundwater in Estonia. There are several regions in Estonia with fluoride contents in public water supplies as high as 7 mg/L. Long-term exposure to high-fluoride drinking water may have several adverse health effects, primarily dental fluorosis. The opportunities for exposure reduction rely highly on water treatment technologies. Since 2004 public water suppliers in Estonia have made efforts to diminish fluoride content in drinking water systems. A follow-up study on a country level was carried out in 2004-2012 to analyze the changes in population exposure to excessive (over 1.5 mg/L) fluoride in drinking water and to get information about the reduction methods applied by public water supplies (PWS) to optimize the fluoride levels in public water system. The results showed that bigger PWS have been more effective in fluoride reduction measures than small PWS. The main methods used to lower the fluoride content were reverse osmosis technology and replacement of water sources with new ones (new drilled wells). As a result of all the measures taken the overall high-fluoride exposure has been reduced substantially (82%).
ERIC Educational Resources Information Center
Kikas, Eve; Poikonen, Pirjo-Liisa; Kontoniemi, Marita; Lyyra, Anna-Liisa; Lerkkanen, Marja-Kristiina; Niilo, Airi
2011-01-01
Mutual trust between mothers and kindergarten teachers along with its relation to mother's educational level and child's gender was studied in two neighboring countries--Estonia and Finland. From Estonia 543 ratings of mothers and 232 ratings of teachers were collected, and, from Finland, 712 ratings of mothers and 712 ratings of teachers. Trust…
Single and double sexual standards in Finland, Estonia, and St. Petersburg.
Haavio-Mannila, Elina; Kontula, Osmo
2003-02-01
The sexual revolution and fight for gender equality began in the West during the 1960s but did not reach the Soviet Union until the late 1980s. Using survey data from nationally representative samples from Finland in 1971, 1992, and 1999 and from two former Soviet areas, Estonia in 2000 and St. Petersburg in 1996, we investigated the following: (a) differences across decades and countries in acceptance of the sexual double standard (SDS) in attitudes toward marital infidelity and women's initiating sex; and (b) the relationship between the SDS and sexual satisfaction. Results show that Finland in the 1990s was more egalitarian than Finland in 1971, St. Petersburg in 1996, or Estonia in 2000. Egalitarian sexual attitudes were positively related to sexual satisfaction.
International Business Education in Estonia--from Socialism to Capitalism.
ERIC Educational Resources Information Center
Palm, Thomas
1995-01-01
Issues in reform of international business and economics education at Tartu University (Estonia) are discussed, including need for faculty development, faculty reallocation, and redistribution of resources within the country's new social and economic context. It is argued that reform depends on effective integration of foreign experts with more…
Risk factors for pulmonary tuberculosis in Estonia.
Tekkel, M; Rahu, M; Loit, H M; Baburin, A
2002-10-01
To determine the risk factors for pulmonary tuberculosis incidence in Estonia. In a case-control study, the cases were 248 adult tuberculosis patients treated in a hospital in Tallinn between January 1999 and June 2000, and the controls were 248 persons sampled from the Population Registry and matched to cases by sex, year of birth and county of residence. A questionnaire was administered to collect information on potential risk factors. Logistic regression was used to calculate odds ratios and 95% confidence intervals. The main risk factors for tuberculosis were marital status other than married, educational level less than higher, low income, having been in prison, not having own place of residence, current unemployment, current smoking, alcohol consumption, shortage of food, and contact with tuberculosis patients. Place of birth was not a risk factor. Risk of tuberculosis decreased for overweight persons whose individual economic situation had improved during the last year. The pattern of risk factors for pulmonary tuberculosis in Estonia was somewhat different from that in Western European countries; a large percentage of the patients were men, but were not elderly, and immigration and drug abuse did not increase the risk. Major risk factors were related to poverty and low socio-economic status.
Toxoplasma gondii seroprevalence in breeding pigs in Estonia.
Santoro, Azzurra; Tagel, Maarja; Must, Kärt; Laine, Miia; Lassen, Brian; Jokelainen, Pikka
2017-12-11
Toxoplasma gondii is a widespread occurring parasite infecting warm-blooded animals, including pigs and humans. The aims of this study were to estimate the prevalence of anti-T. gondii antibodies and to evaluate risk factors for T. gondii seropositivity in breeding pigs raised in Estonia. Sera from 382 pigs were tested with a commercial direct agglutination test, using a cut-off titer of 40 for seropositivity, for the presence of anti-T. gondii immunoglobulin G antibodies. Twenty-two (5.8%) of the 382 pigs tested seropositive for T. gondii, and 6 of the 14 herds had at least one seropositive pig. The proportion of seropositive pigs within the herds ranged between 0 and 43%. Gender appeared as a significant factor, with sows having 5.6 times higher odds to be seropositive to T. gondii than boars. Seroprevalence did not increase with age. Anti-T. gondii antibodies were present in a substantial proportion of breeding pig herds in Estonia. On the other hand, the presence of herds without seropositive pigs illustrates that porcine T. gondii infections can be avoided even in a country where the parasite is endemic and common in several other host species.
Monitoring anonymous HIV testing in Estonia from 2005 to 2015.
Rüütel, K; Kallavus, K; Tomera, I
2018-02-01
In Estonia, a network of anonymous and free of charge HIV testing sites has been operating since 1988. Services are provided by health care organizations and financed by the National Institute for Health Development from the state budget. The objective of this analysis was to assess anonymous HIV testing in Estonia from 2005 to 2015. We used data collected from the National Institute for Health Development's annual reports, Health Board and Estonian Health Insurance Fund. In Estonia, more than 200 000 HIV-tests are performed annually, and of these approximately 5-6% are within anonymous HIV testing sites. The percentage tested with rapid tests in anonymous testing sites has increased from 15% in 2010 to 53% in 2015. Furthermore, up to 65% of all newly diagnosed HIV-cases have been detected in these sites. The proportion of HIV-positive tests has decreased from 3.8% to 0.5% in anonymous testing sites and from 0.3% to 0.1% in general health care. Simultaneously, the cost of detecting one new HIV case has increased almost six times. This analysis reveals that anonymous HIV testing services are well accepted by the general population as well as vulnerable populations. The positivity rate among those tested in anonymous testing sites remains higher than among all people tested, showing that the sites reach more of those who are at higher risk of HIV. In the light of decreasing positivity rate, more attention should be paid to people with higher HIV risk and increasing access to testing in community based settings. © 2018 British HIV Association.
Exposure to High Fluoride Drinking Water and Risk of Dental Fluorosis in Estonia
Indermitte, Ene; Saava, Astrid; Karro, Enn
2009-01-01
The purpose of this study was to assess exposure to drinking water fluoride and evaluate the risk of dental fluorosis among the Estonian population. The study covered all 15 counties in Estonia and 93.7% of population that has access to public water supplies. In Estonia groundwater is the main source for public water supply systems in most towns and rural settlements. The content of natural fluoride in water ranges from 0.01 to 7.20 mg/L. The exposure to different fluoride levels was assessed by linking data from previous studies on drinking water quality with databases of the Health Protection Inspectorate on water suppliers and the number of water consumers in water supply systems. Exposure assessment showed that 4% of the study population had excessive exposure to fluoride, mainly in small public water supplies in western and central Estonia, where the Silurian-Ordovician aquifer system is the only source of drinking water. There is a strong correlation between natural fluoride levels and the prevalence of dental fluorosis. Risk of dental fluorosis was calculated to different fluoride exposure levels over 1.5 mg/L. PMID:19440411
Organizational Learning of Higher Education Institutions: The Case of Estonia
ERIC Educational Resources Information Center
Voolaid, Karen; Ehrlich, Üllas
2017-01-01
Purpose: This paper aims to measure the organizational learning in two of Estonia's Higher Education Institutions (HEI) and identify connections between the organizational learning and various characteristics of HEI, such as ownership form and market participation rate. Design/methodology/approach: Watkins and Marsick's learning organization…
Adoption of National Curricula by Vocational Teachers in Estonia
ERIC Educational Resources Information Center
Rekkor, Sirje; Ümarik, Meril; Loogma, Krista
2013-01-01
This article aims to study the adoption of national curricula by vocational teachers. In the paper, we review the process of vocational education and training curriculum reform in Estonia over the last 20 years, and, in particular, the introduction of national curricula. As teachers should be considered the key agents of curricular change, we look…
Laine, Sari; Saaranen, Terhi; Pertel, Tiia; Hansen, Siivi; Lepp, Kädi; Tossavainen, Kerttu
2016-02-01
This article is part of a long term project "Promoting the Occupational Well-Being of School Staff-Action Research Project in Finland and Estonia, 2009-2014." The purpose of this article is to describe the significance of action plans in the promotion of the occupational well-being of primary and upper secondary school staff in Finland and Estonia from 2010 to the turn of the year 2011-2012. An electronic open questionnaire was sent to occupational well-being groups in Finland (N=18) and in Estonia (N=39). In Finland, the questionnaire was responded to by 16 (n=16) occupational well-being groups, and in Estonia, by 38 (n=38) groups. The qualitative data were analyzed using the inductive-deductive method and content analysis. The obtained results indicate that the schools had named goals for action plans in all aspects of the promotion of occupational well-being in schools (worker and work, working conditions, professional competence, working community) and that these goals were mainly realized in the schools in a systematic way. Schools felt that the action plan for occupational well-being helped them to set goals for occupational well-being and that the planned actions were realized in a more systematic way than before. Copyright © 2015 Elsevier Ltd. All rights reserved.
Why Do People Engage in Corruption? The Case of Estonia
ERIC Educational Resources Information Center
Tavits, Margit
2010-01-01
This study uses survey data for 2004 on the general public (N = 788) and public officials (N = 791) in the young post-communist democracy of Estonia to examine individual-level determinants of corruption. The results indicate that both public officials and citizens are more likely to engage in corruption when they do not define corruption as…
The Implementation of Pharmacy Competence Teaching in Estonia
Volmer, Daisy; Sepp, Kristiina; Veski, Peep; Raal, Ain
2017-01-01
Background: The PHAR-QA, “Quality Assurance in European Pharmacy Education and Training”, project has produced the European Pharmacy Competence Framework (EPCF). The aim of this study was to evaluate the existing pharmacy programme at the University of Tartu, using the EPCF. Methods: A qualitative assessment of the pharmacy programme by a convenience sample (n = 14) representing different pharmacy stakeholders in Estonia. EPCF competency levels were determined by using a five-point scale tool adopted from the Dutch competency standards framework. Mean scores of competency levels given by academia and other pharmacy stakeholders were compared. Results: Medical and social sciences, pharmaceutical technology, and pharmacy internship were more frequent subject areas contributing to EPCF competencies. In almost all domains, the competency level was seen higher by academia than by other pharmacy stakeholders. Despite on-board theoretical knowledge, the competency level at graduation could be insufficient for independent professional practice. Other pharmacy stakeholders would improve practical implementation of theoretical knowledge, especially to increase patient care competencies. Conclusions: The EPCF was utilized to evaluate professional competencies of entry-level pharmacists who have completed a traditional pharmacy curriculum. More efficient training methods and involvement of practicing specialists were suggested to reduce the gaps of the existing pharmacy programme. Applicability of competence teaching in Estonia requires more research and collaborative communication within the pharmacy sector. PMID:28970430
ERIC Educational Resources Information Center
Shukakidze, Berika
2013-01-01
The work is based on PISA 2009 International Assessment Study. Two counties were selected: a developed country, Estonia and a developing country, Azerbaijan. The following Datum was used for statistical analysis: students average scores in reading (162 schools, 4 600 students from Azerbaijan; 17 schools, 4 923 students from Estonia). The work is…
The Professional Foreign Language Teacher in Estonia: Students' and Principals' Perceptions
ERIC Educational Resources Information Center
Oder, Tuuli
2008-01-01
The Republic of Estonia as a typical country in transition is going through major changes in educational thinking. Global and European educational trends, together with local changes, the most important being a new state system, have resulted in changes in the concept of professional foreign language (FL) teaching. Common ground among various…
Financing Estonia's unemployment insurance system: problems and prospects.
Paas, T; Scannell, N J
2000-01-01
In recent years, favorable media coverage of the glowing employment situation in the United States has been the norm. History, for one, won't permit us, however, to become complacent with what appears on the books to be a rosy economic picture for the nation. Moreover, the mounting recognition that the U.S. economy is inextricably tied to those of other nations--large and small--serves to keep us vigilant. This paper allows us a comparative exploration of the employment conditions in Estonia and the problems and prospects of financing its unemployment insurance program.
The National Status of the Preparation of School Psychologists in Estonia
ERIC Educational Resources Information Center
Kikas, Eve
2014-01-01
Estonia is a small republic that has undergone several big societal changes (from belonging to the Soviet Union to becoming a free republic, and the process of integrating into the European Union) during the last several decades. Psychology has been taught as a separate discipline starting from 1968, but its content has been changed from very…
Vöörmann, Rein; Helemäe, Jelena
2015-03-01
The aim of the study is to analyse relationship between self-rated health (SRH) and education in post-socialist countries (Estonia and Russia) and in Finland, a Scandinavian country. Data from the 5th wave of the European Social Survey (ESS) carried out in 2010 were used. In particular, we used a sub-sample of the 25-69 years old. Two-step analysis was carried out: descriptive overview of relationship between SRH and education to assess the knowledge-related impact of education on SRH in pooled model for all three countries; and logistic regression analysis to evaluate separate models in each country. The prevalence of at-least-good health was the highest in Finland, Estonia occupied the second position and Russia the third. Knowledge-related educational inequalities were lower in Russia compared to Finland, while they were of similar magnitude in Estonia and Finland. Our expectations that knowledge-based inequalities are lower in post-socialist countries compared to a Scandinavian country turn to be true in case of Russia, not Estonia. Possible reasons for the expectations might be a lack of attention paid to educational inequalities in terms of access to social resources, competitiveness in the labour market and to what extent education provide a tool against uncertainty (preventing work- and unemployment-related stress). Series of comparative studies revealing links between certain institutional packages and (socio-economic and knowledge-related) educational inequalities seem to be of special relevance.
Explaining the Difference between PISA 2009 Reading Scores in Finland and Estonia
ERIC Educational Resources Information Center
Mikk, Jaan
2015-01-01
The aim of the study was to explain the difference between the Programme for International Student Assessment (PISA) 2009 reading results for Finland and Estonia using characteristics of teaching and learning, and characteristics of the overall development of these countries. PISA data were collected via a reading test and student questionnaires…
ERIC Educational Resources Information Center
United Nations Educational, Scientific, and Cultural Organization, Paris (France). International Inst. for Educational Planning.
This publication presents the outcomes of a distance education course on development and dissemination of indicators used for educational planning. The course took place from November 2000 to February 2001 and was attended by representatives from the ministries of education of Brazil, Cambodia, Estonia, Gambia, Lithuania, and Thailand. The overall…
Influences on Students' Views on Religions and Education in England and Estonia
ERIC Educational Resources Information Center
Neill, Sean; Schihalejev, Olga
2011-01-01
Structural modelling offers an overall pattern of relationships; this paper looks at differences in students' attitude structures between England and Estonia. Where different coherent sets of beliefs exist in a national sample, factor analysis, which focuses on sets of responses which differ between groups, should be able to separate them out.…
Estonian Language Competencies for Peace Corps Volunteers in the Republic of Estonia.
ERIC Educational Resources Information Center
Ets, Tiina K.
This guide is designed for Estonian language training of Peace Corps workers in Estonia, is intended for use in a competency-based language training program, and reflects daily communication needs in that context. It consists of 52 lessons, each addressing a specific language competency, organized in 14 topical units. An introductory section gives…
ERIC Educational Resources Information Center
Keller, Margit; Kalmus, Veronika
2009-01-01
This study measures attitudes towards children's vulnerability or empowerment within consumer culture, based on data from a representative population survey (N = 1475) conducted in Estonia in 2005. The study use indices comprised of assessments of consumption practices and assertions pertaining to the "endangered vs empowered child"…
Economic, Educational and Cultural Predictors of Science Learning in Lithuania and Estonia
ERIC Educational Resources Information Center
Mikk, Jaan
2007-01-01
The aim of the research was to assess the economic, educational and cultural predictors of the TIMSS 2003 science test results in Lithuania and Estonia. The data for the research were received from the TIMSS 2003 User Guide for the International Database. The Spearman rank correlation coefficients, calculated on the students' level and the schools…
When Public Acts Like Private: The Failure of Estonia's School Choice Mechanism
ERIC Educational Resources Information Center
Poder, Kaire; Lauri, Triin
2014-01-01
This article aims to show the segregating effect of the market-like matching of students and schools at the basic school level. The natural experiment case is Tallinn, the capital of Estonia. The current school choice mechanism applied in this case is based on entrance tests. There are increasingly over-subscribed intra-catchment area public…
Will Choice Hurt? Compared to What? A School Choice Experiment in Estonia
ERIC Educational Resources Information Center
Põder, Kaire; Lauri, Triin
2014-01-01
This article presents the empirical analysis of the effects of a school choice policy in Estonia. The article shows that relying on markets and giving autonomy to the schools over student selection will produce admission tests, even at the elementary school level. This article's contribution is to show that a school choice policy experiment with…
E-Learning as Innovation: Exploring Innovativeness of the VET Teachers' Community in Estonia
ERIC Educational Resources Information Center
Loogma, Krista; Kruusvall, Juri; Umarik, Meril
2012-01-01
In this article, the acceptance of e-learning by teachers of vocational secondary and professional higher education institutions (hereafter: VET teachers) in Estonia has been analysed. The analysis is based on questionnaire study, carried out in 2007. The theoretical framework of the article has been inspired by Everett Rogers' innovation…
Reile, Rainer; Helakorpi, Satu; Klumbiene, Jurate; Tekkel, Mare; Leinsalu, Mall
2014-11-01
The late-2000s financial crisis had a severe impact on the national economies on a global scale. In Europe, the Baltic countries were among those most affected with more than a 20% decrease in per capita gross domestic product in 2008-2009. In this study, we explored the effects of economic recession on self-rated health in Estonia and Lithuania using Finland, a neighbouring Nordic welfare state, as a point of reference. Nationally representative cross-sectional data for Estonia (n=10 966), Lithuania (n=7249) and Finland (n=11 602) for 2004-2010 were analysed for changes in age-standardised prevalence rates of less-than-good self-rated health and changes in health inequalities using logistic regression analysis. The prevalence of less-than-good self-rated health increased slightly (albeit not statistically significantly) in all countries during 2008-2010. This was in sharp contrast to the statistically significant decline in the prevalence of less-than-good health in 2004-2008 in Estonia and Lithuania. Health disparities were larger in Estonia and Lithuania when compared to Finland, but decreased in 2008-2010 (in men only). In Finland, both the prevalence of less-than-good health and health disparities remained fairly stable throughout the period. Despite the rapid economic downturn, the short-term health effects in Estonia and Lithuania did not differ from those in Finland, although the recession years marked the end of the previous positive trend in self-rated health. The reduction in health disparities during the recession indicates that different socioeconomic groups were affected disproportionately; however, the reasons for this require further research. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://group.bmj.com/group/rights-licensing/permissions.
Ebela, Inguna; Zile, Irisa; Ebela, Danute Razuka; Rozenfelde, Ingrida Rumba
2013-01-01
BACKGROUND AND OBJECTIVE. A constant gap has appeared in infant mortality among the 3 Baltic States - Latvia, Estonia, and Lithuania - since the restoration of independence in 1991. The aim of the study was to compare infant mortality rates in all the 3 Baltic countries and examine some of the macro- and socioeconomic factors associated with infant mortality. MATERIAL AND METHODS. The data were obtained from international databases, such as World Health Organization and EUROSTAT, and the national statistical databases of the Baltic States. The time series data sets (1996-2010) were used in the regression and correlation analysis. RESULTS. In all the 3 Baltic States, a strong and significant correlation was found: Latvia (r=-0.81, P<0.01), Lithuania (r=-0.93, P<0.01), and Estonia (r=-0.91, P<0.01). There was also a correlation between infant mortality and healthcare expenditure in local currency per capita: Latvia (r=-0.81, P<0.01); Lithuania (r=-0.90, P<0.01) and Estonia (r=-0.88, P<0.01). In Latvia (r=0.87, P<0.01) and Estonia (r=0.70; P<0.01), a significant correlation between infant mortality and unemployment levels was observed from 1996 to 2008, whereas the statistical significance disappeared in the period from 1996 to 2010. In Lithuania, the relationship was not significant. CONCLUSIONS. Higher infant mortality rates and a less stable decreasing tendency in Latvia are apparently explained by less successful adaptation to a new political and economic situation and limited skills in adjusting the healthcare system to the reality of life.
Education Policy as Normative Discourse and Negotiated Meanings: Engaging the Holocaust in Estonia
ERIC Educational Resources Information Center
Stevick, E. Doyle
2010-01-01
This article uses a socio-cultural approach to analyze the formation and implementation of Estonia's Holocaust Day Policy, a day of both commemoration for victims of the Holocaust and other crimes against humanity, and education about the Holocaust. It investigates both the multi-level development of the policy in light of external pressure (from…
Dash, Megha; Vasemägi, Anti
2014-05-13
Proliferative kidney disease (PKD) caused by the myxozoan parasite Tetracapsuloides bryosalmonae is a serious parasitic disease threatening both farmed and wild salmonid populations, but very little is currently known about the distribution of the parasite in the Baltic Sea region. In this study we (1) report the development of a novel multiplex PCR method for fast and reliable screening of T. bryosalmonae; (2) use this multiplex PCR method to show that the PKD agent T. bryosalmonae is widespread in natural brown trout Salmo trutta L. populations in Estonia; (3) evaluate monthly and yearly variation of T. bryosalmonae prevalence in juvenile trout; (4) assess T. bryosalmonae prevalence in different age-classes of fish (0+ vs. 1+ and older) and report the presence of the PKD agent in the kidneys of returning sea trout spawners; and (5) suggest the freshwater bryozoan Plumatella fungosa as a putative invertebrate host of T. bryosalmonae in Estonia. Our results demonstrate a highly heterogeneous distribution of T. bryosalmonae at the micro-geographic scale, indicating that PKD could have an important negative effect on recruitment in Estonian brown trout populations.
Family- and Classroom-Related Factors and Mother-Kindergarten Teacher Trust in Estonia and Finland
ERIC Educational Resources Information Center
Kikas, Eve; Lerkkanen, Marja-Kristiina; Pakarinen, Eija; Poikonen, Pirjo-Liisa
2016-01-01
This study examined the role of family-related (mother's education, depressive symptoms and child's gender) and kindergarten-related (teacher's experience, teaching practices and class size) factors in mothers' and teachers' mutual trust in Estonia and Finland. Six hundred eighteen (206 Estonian and 412 Finnish) mothers of kindergarten children…
Niin, Enel; Laine, M; Guiot, A L; Demerson, J M; Cliquet, F
2008-07-04
Despite the extermination of stray animals and the compulsory vaccination of companion animals, rabies has been widely distributed over Estonia for more than 30 years. The red fox and the raccoon dog are the rabies virus reservoirs. Through a PHARE project, successive oral vaccination campaigns, using Rabidog SAG2 baits, were implemented in the autumn of 2005 in North Estonia, and in the spring and autumn 2006 throughout the whole territory. After the autumn 2005 campaign, 73.5% of the raccoon dogs and foxes were positive for the tetracycline biomarker. After the campaigns of 2006, the seroconversion rate for rabies virus was 64% in both species. After the vaccination campaigns of 2005 and 2006, the incidence of rabies cases dramatically decreased. Of the 97 cases diagnosed in the whole of Estonia until the end of May 2006, 16 cases (16.5%) occurred within the vaccinated area. Only 17 cases were diagnosed between 1 June and 31 December 2006. In 2007, by the end of May, only two rabies cases have been registered.
Radon in the soil air of Estonia.
Petersell, Valter; Täht-Kok, Krista; Karimov, Mark; Milvek, Heli; Nirgi, Siim; Raha, Margus; Saarik, Krista
2017-01-01
Several investigations in Estonia during 1996¬-1999 have shown that permissible level (200 Bq/m 3 ) of radon (222Rn) in indoor air is exceeded in 33% of the inspected dwellings. This makes Estonia one of the five countries with highest radon risk in Europe (Fig 1). Due to correlation between the soil radon risk level and radon concentration in houses, small scale radon risk mapping of soil air was carried out (one study point per 70-100 km 2 ). It turned out that one-third of Estonian mainland has high radon risk potential, where radon concentration in soil air exceeds safe limit of 50 kBq/m 3 . In order to estimate radon content in soil air, two different methods developed in Sweden were used simultaneously. Besides measuring radon content from soil air at the depth of 80 cm with an emanometer (RnM), maximum potential content of radon in soil (RnG) was estimated based on the rate of eU (226Ra) concentration in soil, which was acquired by using gamma-ray spectrometer. Mapping and following studies revealed that simultaneously measured RnG and RnM in study points may often differ. To inspect the cause, several monitoring points were set up in places with different geological conditions. It appeared that unlike the RnG content, which remains close to average level in repeated measurements, the RnM content may differ more than three times periodically. After continuous observations it turned out that concentration of directly measured radon depended on various factors being mostly controlled by mineral composition of soil, properties of topsoil as well as different factors influencing aeration of soil. The results of Rn monitoring show that reliable level of radon risk in Estonian soils can only be acquired by using calculated Rn-concentration in soil air based on eU content and directly measured radon content of soil air in combination with interpreting specific geological and geochemical situations in the study points. Copyright © 2016 Elsevier Ltd. All rights
Three Thousand Years of Continuity in the Maternal Lineages of Ancient Sheep (Ovis aries) in Estonia
Rannamäe, Eve; Lõugas, Lembi; Speller, Camilla F.; Valk, Heiki; Maldre, Liina; Wilczyński, Jarosław; Mikhailov, Aleksandr; Saarma, Urmas
2016-01-01
Although sheep (Ovis aries) have been one of the most exploited domestic animals in Estonia since the Late Bronze Age, relatively little is known about their genetic history. Here, we explore temporal changes in Estonian sheep populations and their mitochondrial genetic diversity over the last 3000 years. We target a 558 base pair fragment of the mitochondrial hypervariable region in 115 ancient sheep from 71 sites in Estonia (c. 1200 BC–AD 1900s), 19 ancient samples from Latvia, Russia, Poland and Greece (6800 BC–AD 1700), as well as 44 samples of modern Kihnu native sheep breed. Our analyses revealed: (1) 49 mitochondrial haplotypes, associated with sheep haplogroups A and B; (2) high haplotype diversity in Estonian ancient sheep; (3) continuity in mtDNA haplotypes through time; (4) possible population expansion during the first centuries of the Middle Ages (associated with the establishment of the new power regime related to 13th century crusades); (5) significant difference in genetic diversity between ancient populations and modern native sheep, in agreement with the beginning of large-scale breeding in the 19th century and population decline in local sheep. Overall, our results suggest that in spite of the observed fluctuations in ancient sheep populations, and changes in the natural and historical conditions, the utilisation of local sheep has been constant in the territory of Estonia, displaying matrilineal continuity from the Middle Bronze Age through the Modern Period, and into modern native sheep. PMID:27732668
Do alcohol excise taxes affect traffic accidents? Evidence from Estonia.
Saar, Indrek
2015-01-01
This article examines the association between alcohol excise tax rates and alcohol-related traffic accidents in Estonia. Monthly time series of traffic accidents involving drunken motor vehicle drivers from 1998 through 2013 were regressed on real average alcohol excise tax rates while controlling for changes in economic conditions and the traffic environment. Specifically, regression models with autoregressive integrated moving average (ARIMA) errors were estimated in order to deal with serial correlation in residuals. Counterfactual models were also estimated in order to check the robustness of the results, using the level of non-alcohol-related traffic accidents as a dependent variable. A statistically significant (P <.01) strong negative relationship between the real average alcohol excise tax rate and alcohol-related traffic accidents was disclosed under alternative model specifications. For instance, the regression model with ARIMA (0, 1, 1)(0, 1, 1) errors revealed that a 1-unit increase in the tax rate is associated with a 1.6% decrease in the level of accidents per 100,000 population involving drunk motor vehicle drivers. No similar association was found in the cases of counterfactual models for non-alcohol-related traffic accidents. This article indicates that the level of alcohol-related traffic accidents in Estonia has been affected by changes in real average alcohol excise taxes during the period 1998-2013. Therefore, in addition to other measures, the use of alcohol taxation is warranted as a policy instrument in tackling alcohol-related traffic accidents.
Learning and Developing as a University Teacher: Narratives of Early Career Academics in Estonia
ERIC Educational Resources Information Center
Remmik, Marvi; Karm, Mari; Lepp, Liina
2013-01-01
In recent years the higher education context in Estonia, as in most European countries, has changed a lot. All changes have an impact on university teachers' practice and their work organisation, and are presenting new challenges. The current research aims at developing an understanding of Estonian early career academics' professional identity by…
ERIC Educational Resources Information Center
Soler-Carbonell, Josep; Saarinen, Taina; Kibbermann, Kerttu
2017-01-01
This article analyses language policies in higher education (HE) in Finland, Estonia, and Latvia, as well as the European Union (EU). We take a multilayered approach to language policies in order to illuminate the intertwined nature of local, national, and international language policies in HE. We are particularly interested in the construction of…
An Examination of the Flynn Effect in the National Intelligence Test in Estonia
ERIC Educational Resources Information Center
Shiu, William
2012-01-01
This study examined the Flynn Effect (FE; i.e., the rise in IQ scores over time) in Estonia from Scale B of the National Intelligence Test using both classical test theory (CTT) and item response theory (IRT) methods. Secondary data from two cohorts (1934, n = 890 and 2006, n = 913) of students were analyzed, using both classical test theory (CTT)…
ERIC Educational Resources Information Center
Alenius, Pauliina
2016-01-01
The aim of the study was to examine the role of migrants in cross-border learning in occupational contexts. The research data included 78 semi-structured and 20 life-course interviews with people who had migrated from Estonia to Finland or who were transmigrating between these countries. The interview data were analysed qualitatively through a…
Põld, Mariliis; Pärna, Kersti; Ringmets, Inge
2016-12-08
Self-rated health (SRH) and socioeconomic position (SEP) as important determinants of health differences are associated with health and economic changes in society. The objectives of this paper were (1) to describe trends in SRH and (2) to analyze associations between SRH and SEP among adults in Estonia in 1996-2014. The study was based on a 25-64-year-old subsample (n = 18757) of postal cross-sectional surveys conducted every second year in Estonia during 1990-2014. SRH was measured using five-point scale and was dichotomized to good and less-than-good. Standardized prevalence of SRH was calculated for each study year. Poisson regression with likelihood ratio test was performed for testing trends of SRH over study years. Age, nationality, marital status, education, work status and income were used to determine SEP. Logistic regression analysis was used to assess association between SRH and SEP. The prevalence of dichotomized good self-rated health increased significantly over the whole study period with slight decrease in 2008-2010. Until 2002, good SRH was slightly more prevalent among men, but after that, among women. Good SRH was significantly associated with younger age, higher education and income and also with employment status among both, men and women. Good SRH was more prevalent among Estonian women and less prevalent among single men. There was a definite increase of good SRH over two decades in Estonia following economic downturn between 2008 and 2010. Good SRH was associated with higher SEP over the study period. Further research is required to study the possible reasons behind increase of good SRH, and it's association with SEP among adults in Estonia.
How Do Preschool Children Engage Each Other in Dialogue in Finland, Estonia and Sweden?
ERIC Educational Resources Information Center
Tryggvason, Marja-Terttu; Tulviste, Tiia; De Geer, Boel
2008-01-01
The present study compares preschool children in Finland, Estonia and Sweden regarding linguistic structures with which children in dyads elicited talk from each other in a naturalistic play activity. Nineteen Finnish (mean age 5.1), 19 Estonian (mean age 5.4) and 17 Swedish (mean age 5.1) same-sex pairs were video-recorded by a native researcher.…
University Studies as a Side Job: Causes and Consequences of Massive Student Employment in Estonia
ERIC Educational Resources Information Center
Beerkens, Maarja; Magi, Eve; Lill, Liis
2011-01-01
Student employment is increasingly common in many countries. Compared to earlier decades, not only more students work but they also work longer hours. Among European countries Estonia is one of the clear "leaders" in student employment. This study uses survey data from 2,496 students in Estonian public and private universities to examine…
ERIC Educational Resources Information Center
Kemppainen, Raija Pini; Ferrin, Scott Ellis; Hite, Steven J.; Hilton, Sterling C.
2008-01-01
The present research was undertaken to identify sociocultural variables that influence whether Russian-speaking parents living in Estonia choose Russian, Estonian, or bilingual (Russian and Estonian) instruction for their children. To examine which sociocultural variables are related to parents' choice of language of instruction, 346…
The Science of Pedagogy in Soviet Estonia (1944-1991): Resilience in the Face of Adversity
ERIC Educational Resources Information Center
Rõuk, Vadim; van der Walt, Johannes L.; Wolhuter, Charl C.
2018-01-01
This article examines how education unfolded as a science in Estonia in the period 1944-1991, i.e. from the second Soviet occupation to the fall of the USSR. Historical analysis of the way prominent scholars and institutions succeeded in overcoming the adverse conditions of that period is conducted by viewing their respective contributions through…
Why is a "Good Abortion Law" Not Enough? The Case of Estonia.
Oja, Liiri
2017-06-01
There are various ways to critically discuss abortion. Constructing or finding the most suitable analytical framework-whether rooted in legal formalism, socio-legal considerations, or comparativism-always depends on the country of subject and whether the analysis is for litigation, advocacy, or more theoretical purposes. This paper offers a model for analyzing abortion in Estonia in order to connect it as a thought-provoking case study to the ongoing transnational abortion discussions. I set out by describing the Estonian Abortion Act as a "good abortion law": a regulation that guarantees in practice women's legal access to safe abortion. Despite this functioning law, I carve a space for criticism by expanding the conversation to the broader power relations and gender dynamics present in Estonian society. Accordingly, I explain the state of the Estonian feminist movement and gender research, the local legal community's minimal engagement with the reproductive rights discourse, and the lingering Soviet-era narratives of reproduction and health, which were not fully extinguished by the combination of human rights commitments and neoliberalism upon restoration of independence in the early 1990s. I consequently show that Estonia's liberal abortion regulation is not grounded in a sufficiently deep understanding of human rights-based approaches to reproductive health, therefore leaving the door open for micro-aggressions toward women and for conservative political winds to gain ground.
A rapid situation assessment of the market for surrogate and illegal alcohols in Tallinn, Estonia.
Pärna, Kersti; Lang, Katrin; Raju, Kadi; Väli, Marika; McKee, Martin
2007-01-01
To understand the phenomenon of consumption of surrogate and illegal alcohols in Tallinn, capital of Estonia. This study, conducted in Tallinn in May 2006, used rapid situation assessment. Interviews with key informants in relevant settings such as emergency departments of hospitals, accommodation for the homeless, police etc. (n = 22), with alcohol abusers (n = 33), natural observations of surrogate sale and consumption venues (n = 46), and tracking of trade data were carried out. Key informants confirmed that consumption of illegal and surrogate alcohols are widely used by alcohol abusers, a finding confirmed by the alcohol abusers. Availability of surrogates varied by area of the city, mainly sold from street kiosks. Illegally produced spirits were also easily available. Sales of surrogates appear to have increased in recent years. A range of alcohol-containing substances that appear to be easily available at low cost, and that have high concentration of ethanol or contaminants known to be toxic, were identified in Tallinn. Alcohol policies in Estonia should address the consumption and availability of these substances.
ERIC Educational Resources Information Center
Clachar, Arlene
1998-01-01
Explores how Americanization and Russification differed in terms of their imperialist language policies and how these policies led two colonialized societies, Puerto Rico and Estonia, to respond in dramatically different ways to the pressures to learn English and Russian respectively. (Author/VWL)
The effects of the lower ignition propensity cigarettes standard in Estonia: time-series analysis.
Saar, Indrek
2018-02-01
In 2011, the lower ignition propensity (LIP) standard for cigarettes was implemented in the European Union. Evidence about the impact of that safety measure is scarce. The aim of this paper is to examine the effects of the LIP standard on fire safety in Estonia. The absolute level of smoking-related fire incidents and related deaths was modelled using dynamic time-series regression analysis. The data about house fire incidents for the 2007-2013 period were obtained from the Estonian Rescue Board. Implementation of the LIP standard has reduced the monthly level of smoking-related fires by 6.2 (p<0.01, SE=1.95) incidents and by 26% (p<0.01, SE=9%) when estimated on the log scale. Slightly weaker evidence was found about the fatality reduction effects of the LIP regulation. All results were confirmed through counterfactual models for non-smoking-related fire incidents and deaths. This paper indicates that implementation of the LIP cigarettes standard has improved fire safety in Estonia. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/.
ERIC Educational Resources Information Center
Kori, Külli; Pedaste, Margus; Altin, Heilo; Tõnisson, Eno; Palts, Tauno
2016-01-01
Despite the high competition for places to study curricula related to information technology (IT) at the higher education level in Estonia, a large number of IT students drop out. Therefore, it is important to explore what influences students to start studying IT and what influences them to persist with their degree program. In this study, data…
ERIC Educational Resources Information Center
Berezkina, Maimu
2017-01-01
This article examines the use of Russian in state communication in officially monolingual Estonia. Drawing on interviews with high-level public employees in four central state institutions and an analysis of these institutions' websites, the article shows that while Russian is not specifically mentioned in the laws, it is "de facto"…
Bilingual Voicing: A Study of Code-Switching in the Reported Speech of Finnish Immigrants in Estonia
ERIC Educational Resources Information Center
Frick, Maria; Riionheimo, Helka
2013-01-01
Through a conversation analytic investigation of Finnish-Estonian bilingual (direct) reported speech (i.e., voicing) by Finns who live in Estonia, this study shows how code-switching is used as a double contextualization device. The code-switched voicings are shaped by the on-going interactional situation, serving its needs by opening up a context…
Launonen, A P; Lepola, V; Laitinen, M; Mattila, V M
2016-09-01
Proximal humerus fractures are common fragility injuries. The incidence of these fractures has been estimated to be 82-105 per 105 person-years. Treatment of this fracture, especially in the elderly, is controversial. Our study group published a systematic review of the available literature and concluded that non-operative methods are favored over operative methods in three- and four-part fractures. The aim of this multinational study was to compare treatment policies for proximal humerus fractures among the Nordic countries and Estonia. The study was conducted as a questionnaire-based survey, using the Internet-based program, Webropol(®) (webropol.com). The questionnaire link was sent to the surgeons responsible for treating proximal humerus fractures in major public hospitals in Estonia, Finland, Norway, and Sweden. Questionnaire included questions regarding the responder's hospital, patient characteristics, and examinations taken before decision making. Clinical part included eight example patient cases with treatment options. Of the 77 recipients of the questionnaire, 59 responded; consequently, the response rate was 77%. Based on the eight presented displaced fracture examples, in both Estonia and Norway and in Finland, 41% and 38%, respectively, preferred surgical treatment with locking plate. In Sweden, the percentage was 28%. The pre- and post-operative protocols showed a similarity in all participant countries. Our survey revealed a remarkable uniformity in the current practice of operative treatments and rehabilitation for proximal humerus fractures in the participant countries. © The Finnish Surgical Society 2016.
Rüütel, Kristi; Parker, R David; Sobolev, Igor; Loit, Helle-Mai
2012-12-01
The purpose of the current study was to describe tuberculosis (TB) knowledge, beliefs, and experience with TB services among injecting drug users. Participants for this anonymous, cross-sectional study were recruited from a community based syringe exchange programme in Tallinn, Estonia. A structured questionnaire was completed and included information on socio-demographics, health history, drug use, and knowledge about TB and HIV. The study included 407 people (79% male, mean age 27.9 years, mean injection drug use 9.4 years). 32.9% of participants reported HIV infection and 1.7% lifetime history of TB. 26.4% participants (n=106) reported symptoms suggestive of TB. 93% of participants recognized correctly that TB is air-borne infection and 91% that HIV is a risk factor for TB. Only 40% of the participants knew that TB diagnostics and treatment in Estonia are free of charge for everybody and 58% reported they knew where to get health care services in case they suspected that they had TB. TB transmission and treatment adherence knowledge was better among those in contact with either health care or harm reduction services, e.g the community based syringe exchange programme. Similar to HIV services, TB prevention and education should be integrated into harm reduction and drug treatment programmes to facilitate early diagnosis and treatment of TB among injecting drug users.
ERIC Educational Resources Information Center
Ojala, Mikko; Talts, Leida
2007-01-01
Each child In Finland and in Estonia receives preschool training for a year before going to school, based on a new national framework curriculum of preschool education. The aim of the present study was to compare children's learning achievements in nine target areas, based on the teacher's evaluations at the end of the preschool year, in both…
ERIC Educational Resources Information Center
Goodgame, Jenna
2007-01-01
This article details an experimental project in Estonian schools, using therapeutic dance and movement as a basis to explore beyond the boundaries of language in supporting young people to develop their creative expression. The author visited three residential schools in different areas of Estonia in September 2006 to lead sessions with groups of…
Federal Register 2010, 2011, 2012, 2013, 2014
2012-12-17
...-0043] RIN 0579-AD20 Importation of Live Swine, Swine Semen, Pork, and Pork Products; Estonia, Hungary... semen by removing one of the conditions for the importation of swine semen from the APHIS-defined... fever. We have determined that the 40-day holding period for swine semen and donor boars after the...
ERIC Educational Resources Information Center
van der Walt, Johannes L.
2013-01-01
The question that prompted this investigation into religion education (RE) in Estonia and in South Africa was whether two countries from such totally different parts of the world, with such vastly different populations and cultures though with somewhat parallel histories, had tackled the same or similar problems regarding the provision of RE in…
Chan, Pui Y; Joseph, Michael A; Des Jarlais, Don C; Uusküla, Anneli
2018-01-01
The HIV epidemic in Estonia affects the population of people who inject drugs (PWID) the most, but factors associated with adherence to antiretroviral therapy (ART) among PWID have not been thoroughly examined in Estonia, with particularly limited data regarding beliefs and attitudes of PWID. The objective of this study was to explore the association between ART adherence and individual beliefs, perceived effectiveness of ART, and self-rated health in particular, in this specific population. The study used baseline survey data from a longitudinal intervention study of HIV prevention among PWID in Estonia, in which 107 HIV-infected participants reported current use of ART. Current adherence was measured through the use of a visual analog scale. Approximately half (49%) of the participants reported optimal (≥95%) adherence. The vast majority (81%) believed in the effectiveness of ART. Less than a quarter of the participants (22%) rated their health as good or very good, and a half (52%) reported average health. Individual beliefs and self-reported health were not associated with ART adherence in both bivariate and multivariable analyses. Participants with problem drinking reported significant suboptimal adherence to ART (adjusted odds ratio [AOR] 0.42, 95% CI 0.19-0.97). Daily injection drug use was also associated with suboptimal adherence (AOR 0.34, 95% CI 0.13-0.91). Problem drinking has not been commonly reported as a factor of suboptimal ART adherence among PWID; further research would be useful to identify the pathways that might be involved.
Kärssin, Age; Velström, Kaisa; Gómez-Morales, Maria Angeles; Saar, Tiiu; Jokelainen, Pikka; Lassen, Brian
2016-09-01
Trichinella spp. are relevant zoonotic pathogens in Estonia. The aim of this nationwide cross-sectional study was to estimate the seroprevalence of Trichinella spp. in domestic pigs (Sus scrofa domestica) and hunted wild boars (Sus scrofa). Serum samples from 374 pigs, originating from 14 farms, and meat juice samples from 470 wild boars were tested for immunoglobulin G antibodies against Trichinella excretory/secretory antigens using a commercial enzyme-linked immunosorbent assay (ELISA). Antibodies against Trichinella were not detected in the domestic pigs, indicating effective parasite control strategies in the farms. By contrast, 42.1% of the wild boars tested positive, indicating substantial infection pressure in the sylvatic cycle. Further analysis of a subset of the wild boar samples, using another ELISA and Western blot, yielded a confirmed seroprevalence estimate of 17.4%. A substantial proportion of wild boars in Estonia had evidence of exposure to Trichinella spp. and may have carried infective larvae. Undercooked Estonian wild boar meat is a potential source of Trichinella spp. infections to humans and other hosts.
Efficiency Assessment of Support Mechanisms for Wood-Fired Cogeneration Development in Estonia
NASA Astrophysics Data System (ADS)
Volkova, Anna; Siirde, Andres
2010-01-01
There are various support mechanisms for wood-fired cogeneration plants, which include both support for cogeneration development and stimulation for increasing consumption of renewable energy sources. The efficiency of these mechanisms is analysed in the paper. Overview of cogeneration development in Estonia is given with the focus on wood-fired cogeneration. Legislation acts and amendments, related to cogeneration support schemes, were described. For evaluating the efficiency of support mechanisms an indicator - fuel cost factor was defined. This indicator includes the costs related to the chosen fuel influence on the final electricity generation costs without any support mechanisms. The wood fuel cost factors were compared with the fuel cost factors for peat and oil shale. For calculating the fuel cost factors, various data sources were used. The fuel prices data were based on the average cost of fuels in Estonia for the period from 2000 till 2008. The data about operating and maintenance costs, related to the fuel type in the case of comparing wood fuel and oil shale fuel were taken from the CHP Balti and Eesti reports. The data about operating and maintenance costs used for peat and wood fuel comparison were taken from the Tallinn Elektrijaam reports. As a result, the diagrams were built for comparing wood and its competitive fuels. The decision boundary lines were constructed on the diagram for the situation, when no support was provided for wood fuels and for the situations, when various support mechanisms were provided during the last 12 years.
Ruutel, K; Lohmus, L; Janes, J
2015-04-16
The aim of the current project was to develop an Internet-based recruitment system for HIV and sexually transmitted infection (STI) screening for men who have sex with men (MSM) in Estonia in order to collect biological samples during behavioural studies. In 2013, an Internet-based HIV risk-behaviour survey was conducted among MSM living in Estonia. After completing the questionnaire, all participants were offered anonymous and free-of-charge STI testing. They could either order a urine sample kit by post to screen for chlamydia infections (including lymphogranuloma venereum (LGV)), trichomoniasis, gonorrhoea and Mycoplasma genitalium infections, or visit a laboratory for HIV, hepatitis A virus, hepatitis B virus,hepatitis C virus and syphilis screening. Of 301 participants who completed the questionnaire, 265 (88%),reported that they were MSM. Of these 265 MSM,68 (26%) underwent various types of testing. In the multiple regression analysis, Russian as the first language,previous HIV testing and living in a city or town increased the odds of testing during the study. Linking Internet-based behavioural data collection with biological sample collection is a promising approach. As there are no specific STI services for MSM in Estonia,this system could also be used as an additional option for anonymous and free-of-charge STI screening.
The ethics of Soviet medical practice: behaviours and attitudes of physicians in Soviet Estonia.
Barr, D A
1996-02-01
To study and report the attitudes and practices of physicians in a former Soviet republic regarding issues pertaining to patients' rights, physician negligence and the acceptance of gratuities from patients. Survey questionnaire administered to physicians in 1991 at the time of the Soviet breakup. Estonia, formerly a Soviet republic, now an independent state. A stratified, random sample of 1,000 physicians, representing approximately 20 per cent of practicing physicians under the age of 65. Most physicians shared information with patients about treatment risks and alternatives, with the exception of cancer patients: only a third of physicians tell the patient when cancer is suspected. Current practice at the time of the survey left patients few options when physician negligence occurred; most physicians feel that under a reformed system physician negligence should be handled within the local facility rather than by the government. It was common practice for physicians to receive gifts, tips, or preferential access to scarce consumer goods from their patients. Responses varied somewhat by facility and physician nationality. The ethics of Soviet medical practice were different in a number of ways from generally accepted norms in Western countries. Physicians' attitudes about the need for ethical reform suggest that there will be movement in Estonia towards a system of medical ethics that more closely approximates those in the West.
The ethics of Soviet medical practice: behaviours and attitudes of physicians in Soviet Estonia.
Barr, D A
1996-01-01
OBJECTIVES: To study and report the attitudes and practices of physicians in a former Soviet republic regarding issues pertaining to patients' rights, physician negligence and the acceptance of gratuities from patients. DESIGN: Survey questionnaire administered to physicians in 1991 at the time of the Soviet breakup. SETTING: Estonia, formerly a Soviet republic, now an independent state. SURVEY SAMPLE: A stratified, random sample of 1,000 physicians, representing approximately 20 per cent of practicing physicians under the age of 65. RESULTS: Most physicians shared information with patients about treatment risks and alternatives, with the exception of cancer patients: only a third of physicians tell the patient when cancer is suspected. Current practice at the time of the survey left patients few options when physician negligence occurred; most physicians feel that under a reformed system physician negligence should be handled within the local facility rather than by the government. It was common practice for physicians to receive gifts, tips, or preferential access to scarce consumer goods from their patients. Responses varied somewhat by facility and physician nationality. CONCLUSION: The ethics of Soviet medical practice were different in a number of ways from generally accepted norms in Western countries. Physicians' attitudes about the need for ethical reform suggest that there will be movement in Estonia towards a system of medical ethics that more closely approximates those in the West. PMID:8932723
ERIC Educational Resources Information Center
Khavenson, Tatiana; Carnoy, Martin
2016-01-01
In this paper, we try to unravel some of the unintended and intended academic effects associated with post-Soviet educational reforms by focusing on three cases: Estonia, Latvia and Russia. We have chosen this comparison because a unique "natural experiment" in the three countries allows us to compare the changing academic performance on…
Mortality and causes of death after traumatic spinal cord injury in Estonia
Sabre, Liis; Rekand, Tiina; Asser, Toomas; Kõrv, Janika
2013-01-01
Study design Retrospective population-based study with mortality follow-up. Objective To study mortality, causes and risk factors for death in Estonian patients with traumatic spinal cord injury (TSCI). Setting All Estonian hospitals. Methods Medical records of patients with TSCI from all regional, central, general, and rehabilitation hospitals in Estonia from 1997 to 2007, were retrospectively reviewed. Mortality status was ascertained as of 31 December 2011. Causes of death were collected from the Estonian Causes of Death Registry. Standardized mortality ratios (SMRs) were calculated for the entire sample and for causes of death. A Cox proportional hazards modeling was used to identify the risk indicators for death. Results During the observation period (1997–2011) 162 patients of 595 died. Nearly half of the patients (n = 76) died during the first year after TSCI. The main causes of death were external causes (30%), cardiovascular disease (29%). and suicide (8%). The overall SMR was 2.81 (95% confidence interval 2.40–3.28) and SMR was higher for women than for men (3.80 vs. 2.70). Cause-specific SMRs were markedly elevated for sepsis and suicide. Mortality was significantly affected by the age at the time of injury, neurological level, and extent of the injury as well as the year of TSCI and complications. Conclusion Life expectancy is significantly decreased in patients with TSCI in Estonia compared with the general population. Deaths during the first year after the injury have an important impact on statistics. Treatment of cardiovascular diseases, infections, and prevention of suicide are useful for reducing mortality in patients with TSCI. PMID:24090049
Cryptosporidiosis - an occupational risk and a disregarded disease in Estonia.
Lassen, Brian; Ståhl, Marie; Enemark, Heidi L
2014-06-05
Cases of cryptosporidiosis have not been officially reported in Estonia after the year 2000, and the disease appears to be either under-diagnosed or under-reported. Based on a human case of cryptosporidiosis contracted during faecal sampling in dairy farms, cattle considered to be sources of infection were analysed for Cryptosporidium spp. by a modified Ziehl Neelsen technique and molecular typing. C. parvum subtype IIaA16G1R1 was detected from the human case and from calves from one of nine farms enrolled in the study providing strong circumstantial evidence of zoonotic transmission from calves to humans. Cryptosporidiosis presents an occupational risk to people with cattle contact, and may also be a risk to the human population in general. Thus increased public and medical awareness is warranted.
ERIC Educational Resources Information Center
Põder, Kaire; Lauri, Triin; Veski, Andre
2017-01-01
We indicate the size of family background effects in Sweden, Finland, and Estonia--countries that differ in both the rhetoric and extensiveness of the system-level school choice policies. Family background effect is defined as the dependence of student achievement on family background characteristics, such as parental education, income, and social…
ERIC Educational Resources Information Center
Rouk, Vadim
2013-01-01
The aim of the paper is to research the important process of the history of the educational development of Estonia, the reform of the national school curriculum which began after the teacher's congress in 1987 and ended in 1996 when government approved the document. That reform was carried out in the context of thoroughgoing and dramatic…
Luik, E; Palk, K; Everaus, H; Varik, M; Aareleid, T; Wennström, L; Juntikka, E-L; Safai-Kutti, S; Stockelberg, D; Holmberg, E; Kutti, J
2004-07-01
To compare the incidence and survival of acute de novo leukaemias with particular reference to political/socio-economic and environmental factors in two neighbouring countries over the three 5-year periods (1982-1996). The present report covers only patients diagnosed when aged > or =65 years. A well-defined area of Sweden, the so-called Western Swedish Health Care Region and Estonia. Population-wise, the western Swedish Region and Estonia are very similar; area-wise they are also well comparable. The number of acute de novo leukaemias was quite dissimilar in the two countries (Estonia, n = 137, Sweden, n = 354). The age standardized incidence rates regarding the total number of acute de novo leukaemias was 5.31 per 100,000 inhabitants/year for Estonia and 7.99 for Sweden, this difference being statistically significant. However, the difference was merely attributable to incidence rates as regards acute myeloblastic leukaemias (AML); on the contrary, differences as regards acute lymphoblastic leukaemias (ALL) and non-classifiable, undifferentiated or biphenotypic acute leukaemias (uAL) were negligible. The relative survival for the total material of patients was significantly higher for Swedish when compared with Estonian patients (P < 0.001). Thus, the relative survival for the total material of patients aged > or =65 years in Estonia at 1 year was 8.5% and at 3 years 3.5% respectively. The corresponding figures for the Swedish patients were considerably higher, 22.7 and 7.7% respectively. This difference, however, applied only for patients with AML (P < 0.001), whereas the results for patients with ALL and uAL were equally dismal. The results clearly reflect how political and socio-economic factors may influence the survival of acute leukemia patients in two neighbouring countries.
Pärna, Kersti; Pürjer, Mari-Liis; Ringmets, Inge; Tekkel, Mare
2014-07-10
In developed countries, smoking spreads through society like an epidemic in which adults from higher socioeconomic groups are the first to adopt and earlier to quit smoking, and in which exists a lag in adoption of smoking between men and women. The objective of this study was to describe trends in daily and occasional smoking, to investigate association between smoking status and education, and to examine if the associations in 1990-2010 in Estonia fit the pattern predicted by the model of tobacco epidemic. The study was based on a 20-64-year-old subsample (n = 18740) of nationally representative postal cross-sectional surveys conducted every second year in Estonia during 1990-2010. Cigarette smoking and education were examined. χ2 test for trend was used to determine daily and occasional smoking trends over study years. Multinomial logistic regression model was used to test educational differences in daily and occasional smoking for every study year. Adjusted relative risk ratios (RRRs) with 95% confidence intervals were calculated. In 1990-2010, daily smoking varied largely between genders showing decreasing trend among men, but not among women. In 2010, one third of men and one fifth of women were daily smokers. Daily smoking was not clearly associated with education among men in 1990-1994 and among women in 1990-2000. Men revealed inverse relationship between daily smoking and education since 1996, but women since 2002. In 2010, compared to men and women with higher education, relative risk ratio of daily smoking was 2.92 (95% CI = 2.01-4.25) among men and 2.29 (95% CI = 1.65-3.17) among women with secondary education, but 4.98 (95% CI 3.12-7.94) among men and 6.62 (95% CI = 4.07-10.76) among women with basic education.In 1990-2010, occasional smoking was stable and similar (varying between 7-10%) among men and women, no association with education was found. Daily smoking patterns in Estonia fit the model of tobacco epidemic in developed countries
Estonia: health system review.
Lai, Taavi; Habicht, Triin; Kahur, Kristiina; Reinap, Marge; Kiivet, Raul; van Ginneken, Ewout
2013-01-01
This analysis of the Estonian health system reviews recent developments in organization and governance, health financing, health-care provision, health reforms and health system performance. Without doubt, the main issue has been the 2008 financial crisis. Although Estonia has managed the downturn quite successfully and overall satisfaction with the system remains high, it is hard to predict the longer-term effects of the austerity package. The latter included some cuts in benefits and prices, increased cost sharing for certain services, extended waiting times, and a reduction in specialized care. In terms of health outcomes, important progress was made in life expectancy, which is nearing the European Union (EU) average, and infant mortality. Improvements are necessary in smoking and alcohol consumption, which are linked to the majority of avoidable diseases. Although the health behaviour of the population is improving, large disparities between groups exist and obesity rates, particularly among young people, are increasing. In health care, the burden of out-of-pocket payments is still distributed towards vulnerable groups. Furthermore, the number of hospitals, hospital beds and average length of stay has decreased to the EU average level, yet bed occupancy rates are still below EU averages and efficiency advances could be made. Going forwards, a number of pre-crisis challenges remain. These include ensuring sustainability of health care financing, guaranteeing a sufficient level of human resources, prioritizing patient-centred health care, integrating health and social care services, implementing intersectoral action to promote healthy behaviour, safeguarding access to health care for lower socioeconomic groups, and, lastly, improving evaluation and monitoring tools across the health system. World Health Organization 2013 (acting as the host organization for, and secretariat of, the European Observatory on Health Systems and Policies).
Jokelainen, Pikka; Tagel, Maarja; Mõtus, Kerli; Viltrop, Arvo; Lassen, Brian
2017-03-15
Toxoplasma gondii is a zoonotic protozoan parasite that thrives in Estonia. In this nationwide cross-sectional study, we tested sera from 3991 cattle, collected from 228 farms in 2012-2013, for anti-T. gondii immunoglobulin G antibodies using a commercial direct agglutination test. Titer of 100 was set as cut-off: samples that tested positive at the dilution 1:100 were defined as positive. The apparent animal-level seroprevalence was 18.62%. At least one seropositive animal was found on 68.86% of the farms, and seropositive cattle were detected in all counties. The seroprevalence appeared to increase with age until five years (60-71 months) of age, but had no obvious pattern in the older animals. Animals of the local Estonian Red breed had higher odds to test seropositive than did animals of the Estonian Holstein breed. Whether the farm focused on dairy or beef cattle was not associated with an animal testing T. gondii seropositive nor with finding at least one T. gondii seropositive animal on the farm. The odds of finding at least one T. gondii seropositive animal on the farm were higher if the herd size was above median (105 in dairy and mixed dairy farms; 35 in beef and mixed beef farms). The results indicate that T. gondii is endemic within the agricultural setting in Estonia and present on the majority of cattle farms. Copyright © 2017 Elsevier B.V. All rights reserved.
ERIC Educational Resources Information Center
Soler-Carbonell, Josep
2014-01-01
The role of English as a global language and its consequences for the internationalization of higher education are matters that have increasingly drawn the attention of researchers from different fields of language and communication. In this paper, an overview of the situation in Estonia is presented. The Estonian context has not previously been…
Realo, Anu; Linnamägi, Karmen; Gelfand, Michele J
2015-06-01
The importance of tightness-looseness as a dimension that explains a considerable amount of variance between cultures was demonstrated by Gelfand et al. (2011). Tight nations have many strong norms and a low tolerance of deviant behaviour, whereas loose nations have weak social norms and a high tolerance of deviant behaviour. The main aim of the current studies was to examine situational constraint in Estonia and Greece: that is, how the cultural dimension of tightness-looseness is manifested in everyday situations in those two countries. The findings of a questionnaire study (Study 1) suggested that, in general, there is higher constraint across everyday situations in Greece than in Estonia, but situational constraint in Greece is especially strong in school and organisational settings where people have hierarchically structured roles. The results of an observational study (Study 2) revealed a relatively high agreement between appropriateness of certain behaviours as judged by the respondents in Study 1 and the frequencies of observed behaviours in the two countries. Our findings suggest that the strength of situations may substantially vary both within and across cultures, and that the attitudes of the members about situational strength in their respective cultures are in concordance with observations of situations by neutral observers in how people in general behave in their culture. © 2014 International Union of Psychological Science.
Burke, Sara E.; Calabrese, Sarah K.; Dovidio, John F.; Levina, Olga S.; Uusküla, Anneli; Niccolai, Linda M.; Abel-Ollo, Katri; Heimer, Robert
2015-01-01
Experiences of stigma are often associated with negative mental and physical health outcomes. The present work tested the associations between stigma and health-related outcomes among people with HIV who inject drugs in Kohtla-Järve, Estonia and St. Petersburg, Russia. These two cities share some of the highest rates of HIV outside of sub-Saharan Africa, largely driven by injection drug use, but Estonia has implemented harm reduction services more comprehensively. People who inject drugs were recruited using respondent-driven sampling; those who indicated being HIV-positive were included in the present sample (n=381 in St. Petersburg; n=288 in Kohtla-Järve). Participants reported their health information and completed measures of internalized HIV stigma, anticipated HIV stigma, internalized drug stigma, and anticipated drug stigma. Participants in both locations indicated similarly high levels of all four forms of stigma. However, stigma variables were more strongly associated with health outcomes in Russia than in Estonia. The St. Petersburg results were consistent with prior work linking stigma and health. Lower barriers to care in Kohtla-Järve may help explain why social stigma was not closely tied to negative health outcomes there. Implications for interventions and health policy are discussed. PMID:25703668
Burke, Sara E; Calabrese, Sarah K; Dovidio, John F; Levina, Olga S; Uusküla, Anneli; Niccolai, Linda M; Abel-Ollo, Katri; Heimer, Robert
2015-04-01
Experiences of stigma are often associated with negative mental and physical health outcomes. The present work tested the associations between stigma and health-related outcomes among people with HIV who inject drugs in Kohtla-Järve, Estonia and St. Petersburg, Russia. These two cities share some of the highest rates of HIV outside of sub-Saharan Africa, largely driven by injection drug use, but Estonia has implemented harm reduction services more comprehensively. People who inject drugs were recruited using respondent-driven sampling; those who indicated being HIV-positive were included in the present sample (n = 381 in St. Petersburg; n = 288 in Kohtla-Järve). Participants reported their health information and completed measures of internalized HIV stigma, anticipated HIV stigma, internalized drug stigma, and anticipated drug stigma. Participants in both locations indicated similarly high levels of all four forms of stigma. However, stigma variables were more strongly associated with health outcomes in Russia than in Estonia. The St. Petersburg results were consistent with prior work linking stigma and health. Lower barriers to care in Kohtla-Järve may help explain why social stigma was not closely tied to negative health outcomes there. Implications for interventions and health policy are discussed. Copyright © 2015 Elsevier Ltd. All rights reserved.
Lai, Taavi; Habicht, Jarno
2011-01-01
To describe alcohol policy changes in parallel to consumption changes in 2005-2010 in Estonia, where alcohol consumption is among the highest in Europe. Review of pertinent legislation and literature. Alcohol consumption decreased since 2008, while alcohol excise tax, sales time restrictions and ad bans have increased since 2005. An economic downturn started in 2008. The precise roles of policy changes and the economic downturn in the decline of alcohol consumption, and whether the decrease will be sustained, are still unclear.
Retrogressive slope failure in glaciolacustrine clays: Sauga landslide, western Estonia
NASA Astrophysics Data System (ADS)
Kohv, Marko; Talviste, Peeter; Hang, Tiit; Kalm, Volli
2010-12-01
The largest recent landslide in Estonia (ca 60 000 m 3), which occurred on 19 December 2005, has been investigated, modelled and monitored. Eight boreholes, geotechnical sampling and nine vane shear tests provided data on the geological setting, soil strength parameters and location of the rupture zones. Topographic surveys were carried out twice a year from April 2006 to April 2009 to monitor the evolution of the slope. Limit equilibrium modelling displayed a complex of six separate retrogressive failures, beginning near to the Sauga River and ending 75 m from the former river channel. Modelling results are in agreement with the actual morphology of the multiple landslides. Monitoring records the enlargement of the landslide as the Sauga River downcuts through the slide and erodes its toe. Strength loss in the varved clays underlying the slope is a key factor in failure development.
"It's Good to Live in Jarva-Jaani but We Can't Stay Here": Youth and Belonging in Rural Estonia
ERIC Educational Resources Information Center
Trell, Elen-Maarja; van Hoven, Bettina; Huigen, Paulus
2012-01-01
In the broader context of post-socialist transition and rural decline, we examine the everyday lives of young people in rural Estonia. We focus in particular on key places of belonging for youths and the practices and experiences through which rural young people develop a sense of belonging to their local places. Our aim is to identify links…
Product environmental footprint of strawberries: Case studies in Estonia and Germany.
Soode-Schimonsky, Eveli; Richter, Klaus; Weber-Blaschke, Gabriele
2017-12-01
The environmental impacts of strawberries have been assessed in several studies. However, these studies either present dissimilar results or only focus on single impact categories without offering a comprehensive overview of environmental impacts. We applied the product environmental footprint (PEF) methodology to broadly indicate the environmental impacts of various strawberry production systems in Germany and Estonia by 15 impact categories. Data for the 7 case studies were gathered from two farms with organic and two farms with conventional open field production systems in Estonia and from one farm with conventional open field and one farm with a polytunnel and greenhouse production system in Germany. The greenhouse production system had the highest environmental impact with a PEF of 0.0040. In the field organic production systems, the PEF was 0.0029 and 0.0028. The field conventional production systems resulted in a PEF of 0.0008, 0.0009 and 0.0002. Polytunnel PEF was 0.0006. Human toxicity cancer effects, particulate matter and human toxicity non-cancer effects resulted in the highest impact across all analysed production systems. The main contributors were electricity for cooling, heating the greenhouse and the use of agricultural machinery including fuel burning. While production stage contributed 85% of the total impact in the greenhouse, also other life cycle stages were important contributors: pre-chain resulted in 71% and 90% of impact in conventional and polytunnels, respectively, and cooling was 47% in one organic system. Environmental impact from strawberry cooling can be reduced by more efficient use of the cooling room, increasing the strawberry yield or switching from oil shale electricity to other energy sources. Greenhouse heating is the overall impact hotspot even if it based on renewable resources. A ranking of production systems based on the environmental impact is possible only if all relevant impacts are included. Future studies should aim
Magnetic history of Early and Middle Ordovician sedimentary sequence, northern Estonia
NASA Astrophysics Data System (ADS)
Plado, J.; Preeden, U.; Pesonen, L. J.; Mertanen, S.; Puura, V.
2010-01-01
Alternating field and thermal demagnetization of lime- and dolostones from the Lower and Middle Ordovician (Floian to Darriwilian stages) subhorizontally bedded sequences in NW and NE Estonia reveal two characteristic magnetization components (named P and S). The intermediate-coercivity (demagnetized at 30-60 mT, up to 300-350°C) reversed polarity component P (mean of Floian Stage: Dref = 147.8 +/- 10.8°, Iref = 65.8 +/- 5.4° combined mean of Dapingian and Darriwilian stages: Dref = 166.0 +/- 8.4°, Iref = 56.1 +/- 6.5°) is regarded as the primary remanence of early diagenetic (chemical) origin. On the Baltica's apparent polar wander path (APWP), the palaeopoles (Floian: Plat = 25.0°N, Plon = 50.8°E, K = 52.7, A95 = 7.2° Dapingian and Darriwilian: Plat = 11.4°N, Plon = 39.1°E, K = 33.8, A95 = 6.7°) are placed on the Lower and Middle Ordovician segment. The poles indicate that Estonia was located at southerly latitudes, decreasing with time (Floian: ~48°S Dapingian and Darriwilian: ~37°S), when the remanence was acquired. A high-coercivity and high-unblocking-temperature component S (mean of samples: Dref = 33.7 +/- 6.3°, Iref = 51.9 +/- 5.7°) that is regarded as a secondary remanence has both normal and reversed polarities. On the European APWP, its palaeopole (Plat = 52.5°N, Plon = 157.9°E, K = 38.9, A95 = 5.3°) gives middle to late Permian age. According to mineralogical (SEM and optical microscopy) and rock magnetic (three-component induced remnant magnetization) studies, component P is carried by magnetite (coexisting with glauconite) and component S by haematite. Magnetite is of chemical origin, formed in the course of early diagenesis and/or dolomitization. During the Permian continental period haematite, the carrier of component S, was likely precipitated from oxidizing meteoric fluids in the already existing or simultaneously formed pore space between the dolomite crystals.
A decline in the prevalence of injecting drug users in Estonia, 2005–2009
Uusküla, A; Rajaleid, K; Talu, A; Abel-Ollo, K; Des Jarlais, DC
2013-01-01
Aims and setting Descriptions of behavioural epidemics have received little attention compared with infectious disease epidemics in Eastern Europe. Here we report a study aimed at estimating trends in the prevalence of injection drug use between 2005 and 2009 in Estonia. Design and methods The number of injection drug users (IDUs) aged 15–44 each year between 2005 and 2009 was estimated using capture-recapture methodology based on 4 data sources (2 treatment data bases: drug abuse and non-fatal overdose treatment; criminal justice (drug related offences) and mortality (injection drug use related deaths) data). Poisson log-linear regression models were applied to the matched data, with interactions between data sources fitted to replicate the dependencies between the data sources. Linear regression was used to estimate average change over time. Findings there were 24305, 12292, 238, 545 records and 8100, 1655, 155, 545 individual IDUs identified in the four capture sources (Police, drug treatment, overdose, and death registry, accordingly) over the period 2005 – 2009. The estimated prevalence of IDUs among the population aged 15–44 declined from 2.7% (1.8–7.9%) in 2005 to 2.0% (1.4–5.0%) in 2008, and 0.9% (0.7–1.7%) in 2009. Regression analysis indicated an average reduction of over 1700 injectors per year. Conclusion While the capture-recapture method has known limitations, the results are consistent with other data from Estonia. Identifying the drivers of change in the prevalence of injection drug use warrants further research. PMID:23290632
Fidler, Armin H; Haslinger, Reinhard R; Hofmarcher, Maria M; Jesse, Maris; Palu, Toomas
2007-05-01
This paper presents a new approach for incorporating public hospitals by contrasting the experience from an "old" EU country (Austria) with a new EU member state (Estonia). In the EU (including the new member states) hospital overcapacity is a serious problem, from a technical, fiscal and political perspective. Few countries have succeeded in establishing an appropriate framework for resource management and for guaranteeing long-term financial viability of their hospital network. Many countries are in search of effective policies for improved hospital management and more cost-effective resource use in the health sector. Over the past decade, experiences in Austria and Estonia have emerged as innovative examples which may provide lessons for other EU countries and beyond. This paper describes the evolution of public hospitals from public budgetary units and public management to incorporated autonomous organizations under private corporate law, resulting in a contractual relationship between (public) owners and private hospital management. Outdated and inefficient public sector structures were replaced by more agile corporate management. The arrangement allows for investments, operating costs and budgeting according to strategic business goals as opposed to political "fiat". Shielding hospitals from local political influence is an important aspect of this concept. Horizontal integration through networking of public hospitals and introducing private management helps create a new corporate culture, allowing for more flexibility to achieve efficiencies through downsizing and economies of scale. Based on contracts the new balance between ownership and managerial functions create strong incentives for a more business-like, results-oriented and consumer-friendly management. This was achieved both in Austria and Estonia in a politically sensitive way, adopting a long-term vision and by protecting the interests of hospital owners and staff.
Rannamäe, E; Lõugas, L; Niemi, M; Kantanen, J; Maldre, L; Kadõrova, N; Saarma, U
2016-04-01
Sheep were among the first domesticated animals to appear in Estonia in the late Neolithic and became one of the most widespread livestock species in the region from the Late Bronze Age onwards. However, the origin and historical expansion of local sheep populations in Estonia remain poorly understood. Here, we analysed fragments of the hypervariable D-loop of mitochondrial DNA (mtDNA; 213 bp) and the Y-chromosome SRY gene (130 bp) extracted from 31 archaeological sheep bones dated from approximately 800 BC to 1700 AD. The ancient DNA data of sheep from Estonia were compared with ancient sheep from Finland as well as a set of contemporary sheep breeds from across Eurasia in order to place them in a wider phylogeographical context. The analysis shows that: (i) 24 successfully amplified and analysed mtDNA sequences of ancient sheep cluster into two haplogroups, A and B, of which B is predominant; (ii) four of the ancient mtDNA haplotypes are novel; (iii) higher mtDNA haplotype diversity occurred during the Middle Ages as compared to other periods, a fact concordant with the historical context of expanding international trade during the Middle Ages; (iv) the proportion of rarer haplotypes declined during the expansion of sheep from the Near Eastern domestication centre to the northern European region; (v) three male samples showed the presence of the characteristic northern European haplotype, SNP G-oY1 of the Y-chromosome, and represent the earliest occurrence of this haplotype. Our results provide the first insight into the genetic diversity and phylogeographical background of ancient sheep in Estonia and provide basis for further studies on the temporal fluctuations of ancient sheep populations. © 2016 Stichting International Foundation for Animal Genetics.
Remediation of an oily leachate pond in Estonia.
Kriipsalu, Mait; Marques, Marcia; Hogland, William
2005-12-01
Until recent years, waste oil and oil-contaminated waters commonly ended up in landfills. At some dump sites, ponds of oily liquids and leachate were formed. To remediate such ponds, an interdisciplinary approach is now required, keeping costs at an affordable level, particularly in countries with changing economies. From 1974 to 1993, liquid oily wastes taken to the Laguja landfill, in Estonia, were disposed of in a pond with a surface area of 9800 m2. It was estimated that the pond contained 4500-6000 m3 of oily water and 3500 m3 of oil-containing bottom sediments. This study aimed at developing an environmentally sound and cost-effective method for remediation of the oily liquids, leachate and contaminated underlying sediment material, to meet the existing legal demands. It was concluded that treatment of contaminated water is well established and the procedures carried out to meet the regulatory demands achieved satisfactory results. However, regarding treatment of sediments it was concluded that legal and technological aspects, as well as monitoring procedures are not fully established and are usually underestimated. Laboratory investigations can provide valuable information in decision-making, and contribute to effective full-scale remediation planning.
ERIC Educational Resources Information Center
Krull, Edgar
Fifty years of Soviet occupation in Estonia has damaged social and economic life. One issue for further development of Estonian society is the need to reform teacher education programs. This paper outlines some of the main problems concerning the content of theoretical preparation of future teachers in educational subjects at Tartu University…
Abortion trends from 1996 to 2011 in Estonia: special emphasis on repeat abortion
2014-01-01
Background The study aimed to describe the overall and age-specific trends of induced abortions from 1996 to 2011 with an emphasis on socio-demographic characteristics and contraceptive use of women having had repeat abortions in Estonia. Methods Data were retrieved from the Estonian Medical Birth and Abortion Registry and Statistics Estonia. Total induced abortion numbers, rates, ratios and age-specific rates are presented for 1996–2011. The percentage change in the number of repeat abortions within selected socio-demographic subgroups, contraception use and distribution of induced abortions among Estonians and non-Estonians for the first, second, third, fourth and subsequent abortions were calculated for the periods 1996–2003 and 2004–2011. Results Observed trends over the 16-year study period indicated a considerable decline in induced abortions with a reduction in abortion rate of 57.1%, which was mainly attributed to younger cohorts. The percentage of women undergoing repeat abortions fell steadily from 63.8% during 1996–2003 to 58.0% during 2004–2011. The percentage of women undergoing repeat abortions significantly decreased over the 16 years within all selected socio-demographic subgroups except among women with low educational attainment and students. Within each time period, a greater percentage of non-Estonians than Estonians underwent repeat abortions and obtained third and subsequent abortions. Most women did not use any contraceptive method prior to their first or subsequent abortion. Conclusion A high percentage of women obtaining repeat abortions reflects a high historical abortion rate. If current trends continue, a rapid decline in repeat abortions may be predicted. To decrease the burden of sexual ill health, routine contraceptive counselling, as standard care in the abortion process, should be seriously addressed with an emphasis on those groups - non-Estonians, women with lower educational attainment, students and women with children
Atun, Rifat Ali; Menabde, Nata; Saluvere, Katrin; Jesse, Maris; Habicht, Jarno
2006-11-01
All post-Soviet countries are trying to reform their primary health care (PHC) systems. The success to date has been uneven. We evaluated PHC reforms in Estonia, using multimethods evaluation: comprising retrospective analysis of routine health service data from Estonian Health Insurance Fund and health-related surveys; documentary analysis of policy reports, laws and regulations; key informant interviews. We analysed changes in organisational structure, regulations, financing and service provision in Estonian PHC system as well as key informant perceptions on factors influencing introduction of reforms. Estonia has successfully implemented and scaled-up multifaceted PHC reforms, including new organisational structures, user choice of family physicians (FPs), new payment methods, specialist training for family medicine, service contracts for FPs, broadened scope of services and evidence-based guidelines. These changes have been institutionalised. PHC effectiveness has been enhanced, as evidenced by improved management of key chronic conditions by FPs in PHC setting and reduced hospital admissions for these conditions. Introduction of PHC reforms - a complex innovation - was enhanced by strong leadership, good co-ordination between policy and operational level, practical approach to implementation emphasizing simplicity of interventions to be easily understood by potential adopters, an encircling strategy to roll-out which avoided direct confrontations with narrow specialists and opposing stakeholders in capital Tallinn, careful change-management strategy to avoid health reforms being politicized too early in the process, and early investment in training to establish a critical mass of health professionals to enable rapid operationalisation of policies. Most importantly, a multifaceted and coordinated approach to reform - with changes in laws; organisational restructuring; modifications to financing and provider payment systems; creation of incentives to enhance
Uusküla, Anneli; McNutt, Louise Anne; Dehovitz, Jack
2004-10-01
Estonia is among those Eastern European countries that have witnessed an explosive intravenous drug use-driven HIV epidemic. Early sexually transmitted disease (STD) diagnosis and appropriate treatment is essential to prevent an STD-driven HIV epidemic. The objectives of this study were to define the schedule of antibiotic treatment doctors in Estonia used to treat STDs, and to determine if the treatments used correspond to evidence-based medicine treatment principles. Using an administrative database of the Estonian Health Insurance Fund on pharmaceuticals reimbursement, we obtained information on: drug (ATC 1998) prescribed with an STD diagnosis (International Classification of Diseases and Related Health Problems, syphilis, gonorrhea, genital Chlamydia trachomatis and Trichomonas vaginalis infections, and genital herpes), prescribing physician specialty, and patient demographics (date of birth, gender). To evaluate the correspondence of STD treatment to evidence-based medicine principles, the therapeutic regimens used were compared with recommendations from the European Sexually Transmitted Infections Management Guidelines. In 2001 and 2002, physicians ordered 17,077 prescriptions for systemic antibacterial medications to treat STDs in 12,823 different individuals: 2942 men (mean age, 31.8 years) and 9880 women (mean age, 29.5 years). The majority of STD treatments were prescribed by gynecologists (60%) or dermatovenerologists (29%); general practitioners treated 8% of STDs. In 11% of treatment episodes, the drug prescribed was inconsistent with guideline recommendations; additionally, in 9% of episodes, the recommended drug was chosen but the prescribed dose was too low. At least 20% of treatment episodes could therefore be considered inappropriate. Educational efforts are needed to increase physician awareness of evidence-based approaches for STD management and treatment to assure effective STD care.
Mark, Lauraliisa; Samm, Algi; Tooding, Liina-Mai; Sisask, Merike; Aasvee, Katrin; Zaborskis, Apolinaras; Zemaitiene, Nida; Värnik, Airi
2013-01-01
Suicide is a leading cause of death among youth. In the year 2002, Lithuania had the 2nd, Luxembourg the 5th, and Estonia the 9th highest suicide rates among 15- to 19-year-olds across 90 countries worldwide. Suicidal ideation is a significant precursor to suicide. To report on the prevalence of and associations between suicidal ideation, smoking, alcohol consumption, physical fighting, bullying, and communication with parents among 15-year-old schoolchildren. The survey analyzes data from the 2005/2006 HBSC study from Estonia, Lithuania, and Luxembourg (N = 4,954). The risk factors were calculated through multinomial logistic regression analyses. The overall prevalence of suicidal ideation in the preceding year was 17%. Suicidal thoughts were associated with communication difficulties with parents (OR from 2.0 to 4.6) and other risk factors, especially multiple risks (OR for 4-5 concurrent risk factors from 4.5 to 13.6). Parent-child communication had a significant mediating effect by decreasing the odds for suicidality and multiple risks. The prevalence estimates were obtained by self-reports. The causal relationships need further investigation. The risk factors studied, particularly multiple risks, were associated with higher odds for suicidal ideation. Good parent-child communication is a significant resource for decreasing suicidal ideation among adolescents.
Bhatnagar, Amit; Kaczala, Fabio; Burlakovs, Juris; Kriipsalu, Mait; Hogland, Marika; Hogland, William
2017-06-01
Landfill mining is an alternative technology that merges the ideas of material recycling and sustainable waste management. This paper reports a case study to estimate the value of landfilled materials and their respective market opportunities, based on a full-scale landfill mining project in Estonia. During the project, a dump site (Kudjape, Estonia) was excavated with the main objectives of extracting soil-like final cover material with the function of methane degradation. In total, about 57,777 m 3 of waste was processed, particularly the uppermost 10-year layer of waste. Manual sorting was performed in four test pits to determine the detailed composition of wastes. 11,610 kg of waste was screened on site, resulting in fine (<40 mm) and coarse (>40 mm) fractions with the share of 54% and 46%, respectively. Some portion of the fine fraction was sieved further to obtain a very fine grained fraction of <10 mm and analyzed for its potential for metals recovery. The average chemical composition of the <10 mm soil-like fraction suggests that it offers opportunities for metal (Cr, Cu, Ni, Pb, and Zn) extraction and recovery. The findings from this study highlight the importance of implementing best available site-specific technologies for on-site separation up to 10 mm grain size, and the importance of developing and implementing innovative extraction methods for materials recovery from soil-like fractions.
Women in Physics in Estonia: Many Duties, One Life
NASA Astrophysics Data System (ADS)
Kaasik, Helle
2009-04-01
In Estonia, women and men have equal legal rights. Women are expected to earn their living like men—and unlike men, to be the main (often the only) caregiver for the children. In the family women do most of the unpaid work, spending twice the amount of time on household duties as men. Laws about public preschool child care and child support obligations for noncustodial parents exist, but these laws are not always realized in practice. A generous policy of benefits for children under 1.5 years provides some relief for mothers. It is a challenge to balance a woman's traditional load of unpaid duties with the high demands of a science career. As in many other countries, with every step up the academic ladder the underrepresentation of women in science becomes more evident. Physics and engineering are perceived as male areas and women active in these areas are often treated as exceptions. Most obstacles met by women in science are difficult to recognize and neutralize because they are deeply informal. Activities for "gender and science" that exceed the limits of sociological study have no long tradition here and are yet finding their place in Estonian society.
Mental disorders among Chernobyl cleanup workers from Estonia: A clinical assessment.
Laidra, Kaia; Rahu, Kaja; Kalaus, Katri-Evelin; Tekkel, Mare; Leinsalu, Mall
2017-08-01
To assess, at a clinical level, the mental health of former Chernobyl cleanup workers from Estonia by comparing them with same-age controls. The Mini International Neuropsychiatric Interview (MINI) was administered during 2011-2012 to 99 cleanup workers and 100 population-based controls previously screened for mental health symptoms. Logistic regression analysis showed that cleanup workers had higher odds of current depressive disorder (odds ratio [OR] = 3.07, 95% confidence interval [CI: 1.34, 7.01]), alcohol dependence (OR = 3.47, 95% CI [1.29, 9.34]), and suicide ideation (OR = 3.44, 95% CI [1.28, 9.21]) than did controls. Except for suicide ideation, associations with Chernobyl exposure became statistically nonsignificant when adjusted for education and ethnicity. A quarter of a century after the Chernobyl accident, Estonian cleanup workers were still at increased risk of mental disorders, which was partly attributable to sociodemographic factors. (PsycINFO Database Record (c) 2017 APA, all rights reserved).
Raal, Ain; Kirsipuu, Kadri; Must, Reelika; Tenno, Silvi
2009-01-01
The aim of the present study was to investigate the content of total carotenoids in different collections of pot marigold (Calendula officinalis L.) inflorescences. Commercial seeds (42 samples) of C. officinalis were obtained from nine countries and cultivated in private gardens in three different counties of Estonia. The content of total carotenoids, determined spectrophotometrically (lambda=455 nm) varied in the investigated collections from 0.20 to 3.51%. The amount of pigments may depend on the type of plants, the importing company, the color of the ligulate and tubular florets, and the place and time of cultivation. For medicinal purposes, C. officinalis with brownish-yellow ligulate and tubular florets should be preferred. The best was found to be 'Golden Emperor' from Finland.
A policy of introducing a new contract and funding system of general practice in Estonia.
Lember, Margus
2002-01-01
The socialist bloc of post-war Europe was obliged to follow the Soviet example with a hierarchical, centrally controlled health care system based on polyclinics and other facilities providing extensive specialist services at the first level of contact. All the countries of Central and Eastern Europe have now expressed their wish to totally change their health care systems. Changes in these countries include: the introduction of market economy mechanisms in health care, an increased focus on population health needs in guiding health care systems, and the possibility of introducing a more general type of care at primary level. Patient expectations of access, choice and convenience are factors in shaping new models of health care delivery. Appropriate timing is the key determinant of the success of reforms. In Estonia the beginning of the 1990s was the time when several interest groups in society supported changes in the health care system. The first step after regaining independence was the reintroduction of a Bismarck-type insurance system. In the late 1990s the primary care reforms have changed the initial plans and elements of a National Health Service were introduced, especially general practitioners' lists, capitation payment and gate-keeping principles. The family medicine reform in Estonia has two main objectives: introduction of general practice as a specialty into Estonian health care and changing the remuneration system of primary care doctors. The specific tasks are: to provide practising primary care doctors with opportunities for retraining to gain the specialty status of a general practitioner, to create a list system for the population to register with a primary care doctor, to introduce a partial gate-keeping system and to give the status of the independent contractor to primary care doctors.
Parker, R. David; Rüütel, Kristi
2017-03-01
Our study assessed sexually transmitted infections (STI) occurrence and risk behaviours from a sample of the defence forces of Estonia. Previous research on military personnel yields various results on the prevalence of STIs and high risk behaviours. The increasing recognition of high risk behaviours among military personnel is evident given increased programmes that focus on education of drug use and risky sexual behaviours. Many militaries conduct routine, periodic screening for diseases such as HIV and viral hepatitis at entry and pre-foreign deployment. Protecting deployed forces from secondary infections is important as persons with chronic viral infections are living longer, healthier lives and are more frequently serving in military forces. A cross sectional study used convenient sampling among professional defence forces. Participation was both voluntary and anonymous. Of 186 participants accounting for 7.3% of all forces (86.6% male, mean age 30 years) at selected bases, there were four cases of chlamydia. No cases of gonorrhea, trichomoniasis, hepatitis C, hepatitis B, or HIV were found. One person reported ever injecting drugs. These findings indicate a lower STI occurrence among professional defence forces in Estonia compared with the non-military population. While these rates were lower than expected, as a voluntary study, people suspicious of having an STI might opt not to participate, limiting generalizability to the remainder of the military. Militaries without regular screening programmes could consider regular scheduled testing for STIs, HIV and blood borne pathogens, even if voluntary, especially prior to foreign deployment. Consistent testing would align across many militaries who deploy international peace keepers. Copyright© by the National Institute of Public Health, Prague 2017
Karro, Enn; Uppin, Marge
2013-05-01
Silurian-Ordovician (S-O) aquifer system is an important drinking water source of central and western Estonia. The fluoride and boron contents of groundwater in aquifer system vary considerably. The fluoride concentration in 60 collected groundwater samples ranged from 0.1 to 6.1 mg/l with a mean of 1.95 mg/l in the study area. Boron content in groundwater varied from 0.05 mg/l to 2.1 mg/l with a mean value of 0.66 mg/l. Considering the requirements of EU Directive 98/83/EC and the Estonian requirements for drinking water quality, the limit value for fluoride (1.5 mg/l) and for boron (1.0 mg/l) is exceeded in 47 and 28 % of wells, respectively. Groundwater with high fluoride and boron concentrations is found mainly in western Estonia and deeper portion of aquifer system, where groundwater chemical type is HCO3-Cl-Na-Mg-Ca, water is alkaline, and its Ca(2+) content is low. Groundwater of the study area is undersaturated with respect to fluorite and near to equilibrium phase with respect to calcite. The comparison of TDS versus Na/(Na + Ca) and Cl/(Cl + HCO3) points to the dominance of rock weathering as the main process, which promotes the availability of fluoride and boron in the groundwater. The geological sources of B in S-O aquifer system have not been studied so far, but the dissolution of fluorides from carbonate rocks (F = 100-400 mg/kg) and K-bentonites (F = 2,800-4,500 mg/kg) contributes to the formation of F-rich groundwater.
Waaramaa, Teija
2015-10-01
The present study focused on the identification of emotions in cross-cultural conditions on different continents and among subjects with divergent language backgrounds. The aim was to investigate whether the perception of the basic emotions from nonsense vocal samples was universal, dependent on voice quality, musicality, and/or gender. Listening tests for 350 participants were conducted on location in a variety of cultures: China, Egypt, Estonia, Finland, Russia, Sweden, and the USA. The results suggested that the voice quality parameters played a role in the identification of emotions without the linguistic content. Cultural background may affect the interpretation of the emotions more than the presumed universality. Musical interest tended to facilitate emotion identification. No gender differences were found.
Sammul, Sirje; Viigimaa, Margus
2018-05-27
Hypertension is an important public health problem which causes premature morbidity and mortality. Cardiovascular diseases are responsible for about 55% of deaths in Estonia. was to assess, through a follow-up period, the prevalence of hypertension and to observe which risk factors of cardiovascular disease impact the occurrence of the disease. The second aim of the study was to evaluate the role of psychosocial factors and personality traits among individuals with a diagnosis of hypertension. The 330 subjects from Estonia, aged 55 years at baseline, from among whom 219 participated at follow-up. A cross-sectional study based on a self-reported questionnaire was conducted. Over 13 years, the prevalence of hypertension increased from 4% to 53%. Obese (body mass index ≥30 kg/m 2 ) individuals were four times more likely to belong to the hypertension group (p < .01). Among individuals with hypertension the depressed mood score was ≥4 points (max. 9 points) in 54.3% of participants. Depressed mood was linked with experiencing negative stressful life events (B = 0.047, 95% CI 0.016; 0.079; p < .01). Mastery had a protective impact on depressed mood. The self-rated quality of life score was lower among subjects with hypertension than among those who were not diagnosed with hypertension (p < .05). According to the 13-year follow-up study, rapid socio-economic changes in Estonia have affected psychosocial health factors among 55-year-old individuals with a diagnosis of hypertension. There is a significant relationship between obesity and the development of hypertension.
Cyclic sedimentation pattern in Lake Veetka, southeast Estonia: a case study
NASA Astrophysics Data System (ADS)
Saarse, Leili
2015-03-01
A sediment core from Lake Veetka, southeast Estonia, 1077 cm in length and covering 10,500 calibrated years, was examined using loss-on-ignition, grain-size distribution and AMS 14C dating to reconstruct depositional dynamics. The studied core, recovered from the northern part of the lake, shows a cyclic pattern of organic and mineral matter concentration with cycle durations of 100-400 years. Cyclicity is displayed better in sediments laid down between 9,200 and 5,600 cal BP. Within two time windows (5,600-5,100 cal BP and from 1,200 cal BP to the present), sediment composition changed drastically on account of a high and fluctuating mineral matter content, obviously driven by different factors. Little Ice Age cooling is characterised by the highest proportion of mineral matter, and the Medieval Warm Period is typified by high organic matter content. The cyclic change of organic and mineral matter has been related to climate dynamics, most likely an alternation of wet and dry conditions, changes in the water level of the lake and differences in bioproduction
Moberg, S
1997-03-01
A survey of 125 prospective special education teachers assessed perceptions and beliefs about inclusive education in Estonia, Finland, and the United States (Michigan). The attitudes toward inclusion were rather critical. The Estonians were the most critical group, the Finns the least critical. The meanings attached to a student with severe mental retardation were related to the educational setting assessed as the best for this student. The findings suggest that special educators perceptions about inclusion are related to the prevailing implementation of inclusive education. The results support also the idea that the meanings attached to a person with a disability are connected with behavioural intentions toward this person.
ERIC Educational Resources Information Center
Saaranen, Terhi; Sormunen, Marjorita; Pertel, Tiia; Streimann, Karin; Hansen, Siivi; Varava, Liana; Lepp, Kadi; Turunen, Hannele; Tossavainen, Kerttu
2012-01-01
Purpose: This paper aims to present the baseline results of a research and development project targeted to improve the occupational well-being of school staff and maintain their ability to work, in Finland and Estonia. It reveals the most problematic factors in the various aspects of the school community and professional competence and outlines…
Raal, Ain; Volmer, Daisy; Sõukand, Renata; Hratkevitš, Sofia; Kalle, Raivo
2013-01-01
The aim of the current survey was to investigate the complementary self-treatment of the common cold and flu with medicinal plants among pharmacy customers in Estonia. A multiple-choice questionnaire listing 10 plants and posing questions on the perceived characteristics of cold and flu, the effectiveness of plants, help-seeking behaviour, self-treatment and sources of information, was distributed to a sample of participants in two medium size pharmacies. The participants were pharmacy customers: 150 in Tallinn (mostly Russian speaking) and 150 in Kuressaare (mostly Estonian speaking). The mean number of plants used by participants was 4.1. Of the respondents, 69% self-treated the common cold and flu and 28% consulted with a general practitioner. In general, medicinal plants were considered effective in the treatment of the above-mentioned illnesses and 56% of the respondents had used exclusively medicinal plants or their combination with OTC medicines and other means of folk medicine for treatment. The use of medicinal plants increased with age and was more frequent among female than male respondents. Among Estonian-speaking customers lime flowers, blackcurrant and camomile were more frequently used, and among Russian speaking customers raspberry and lemon fruits. Regardless of some statistically significant differences in preferred species among different age, education, sex and nationality groups, the general attitude towards medicinal plants for self-treatment of the common cold and flu in Estonia was very favourable.
Measurement of community empowerment in three community programs in Rapla (Estonia).
Kasmel, Anu; Andersen, Pernille Tanggaard
2011-03-01
Community empowerment approaches have been proven to be powerful tools for solving local health problems. However, the methods for measuring empowerment in the community remain unclear and open to dispute. This study aims to describe how a context-specific community empowerment measurement tool was developed and changes made to three health promotion programs in Rapla, Estonia. An empowerment expansion model was compiled and applied to three existing programs: Safe Community, Drug/HIV Prevention and Elderly Quality of Life. The consensus workshop method was used to create the measurement tool and collect data on the Organizational Domains of Community Empowerment (ODCE). The study demonstrated considerable increases in the ODCE among the community workgroup, which was initiated by community members and the municipality's decision-makers. The increase was within the workgroup, which had strong political and financial support on a national level but was not the community's priority. The program was initiated and implemented by the local community members, and continuous development still occurred, though at a reduced pace. The use of the empowerment expansion model has proven to be an applicable, relevant, simple and inexpensive tool for the evaluation of community empowerment.
Measurement of Community Empowerment in Three Community Programs in Rapla (Estonia)
Kasmel, Anu; Andersen, Pernille Tanggaard
2011-01-01
Community empowerment approaches have been proven to be powerful tools for solving local health problems. However, the methods for measuring empowerment in the community remain unclear and open to dispute. This study aims to describe how a context-specific community empowerment measurement tool was developed and changes made to three health promotion programs in Rapla, Estonia. An empowerment expansion model was compiled and applied to three existing programs: Safe Community, Drug/HIV Prevention and Elderly Quality of Life. The consensus workshop method was used to create the measurement tool and collect data on the Organizational Domains of Community Empowerment (ODCE). The study demonstrated considerable increases in the ODCE among the community workgroup, which was initiated by community members and the municipality’s decision-makers. The increase was within the workgroup, which had strong political and financial support on a national level but was not the community’s priority. The program was initiated and implemented by the local community members, and continuous development still occurred, though at a reduced pace. The use of the empowerment expansion model has proven to be an applicable, relevant, simple and inexpensive tool for the evaluation of community empowerment. PMID:21556179
Detection and identification of Rickettsia species in Ixodes tick populations from Estonia.
Katargina, Olga; Geller, Julia; Ivanova, Anna; Värv, Kairi; Tefanova, Valentina; Vene, Sirkka; Lundkvist, Åke; Golovljova, Irina
2015-09-01
A total of 1640 ticks collected in different geographical parts of Estonia were screened for the presence of Rickettsia species DNA by real-time PCR. DNA of Rickettsia was detected in 83 out of 1640 questing ticks with an overall prevalence of 5.1%. The majority of the ticks infected by rickettsiae were Ixodes ricinus (74 of 83), while 9 of the 83 positive ticks were Ixodes persulcatus. For rickettsial species identification, a part of the citrate synthase gltA gene was sequenced. The majority of the positive samples were identified as Rickettsia helvetica (81 out of 83) and two of the samples were identified as Rickettsia monacensis and Candidatus R. tarasevichiae, respectively. Genetic characterization based on the partial gltA gene showed that the Estonian sequences within the R. helvetica, R. monacensis and Candidatus R. tarasevichiae species demonstrated 100% similarity with sequences deposited in GenBank, originating from Rickettsia species distributed over large territories from Europe to Asia. Copyright © 2015 Elsevier GmbH. All rights reserved.
Plumer, Liivi; Davison, John; Saarma, Urmas
2014-01-01
Urban areas are becoming increasingly important for wildlife as diminishing natural habitats no longer represent a suitable environment for many species. Red foxes (Vulpes vulpes) are nowadays common in many cities worldwide, and in recent years they have colonized urban areas in Estonia. We used a public web-based questionnaire approach to evaluate the distribution and behaviour of Estonian urban foxes, to detect related problems and to assess health risks to humans and domestic animals. In total, 1205 responses were collected throughout the country. Foxes have colonized the majority of Estonian towns (33 out of 47) in a relatively short period of time, and have already established breeding dens in several towns. Despite their recent arrival, the behaviour of Estonian urban foxes is similar to that reported in longer-established urban fox populations: they are mostly active during night-time, often visit city centres and some also have dens in such locations. Certain characteristics of urban foxes serve as a basis for conflict with humans: foxes have entered houses and attacked domestic animals, killing cats and poultry. About 8% of reported foxes exhibited symptoms of sarcoptic mange, a disease that also infects domestic animals, especially dogs. The proportion of mange-infected foxes was higher in large urban areas. In addition to mange, a substantial fraction of red foxes in Estonia are known to be infected with the life-threatening tapeworm Echinococcus multilocularis, the causative agent of alveolar echinococcosis. Therefore, urban foxes may represent a source of serious infectious disease for pets and humans. PMID:25531399
Plumer, Liivi; Davison, John; Saarma, Urmas
2014-01-01
Urban areas are becoming increasingly important for wildlife as diminishing natural habitats no longer represent a suitable environment for many species. Red foxes (Vulpes vulpes) are nowadays common in many cities worldwide, and in recent years they have colonized urban areas in Estonia. We used a public web-based questionnaire approach to evaluate the distribution and behaviour of Estonian urban foxes, to detect related problems and to assess health risks to humans and domestic animals. In total, 1205 responses were collected throughout the country. Foxes have colonized the majority of Estonian towns (33 out of 47) in a relatively short period of time, and have already established breeding dens in several towns. Despite their recent arrival, the behaviour of Estonian urban foxes is similar to that reported in longer-established urban fox populations: they are mostly active during night-time, often visit city centres and some also have dens in such locations. Certain characteristics of urban foxes serve as a basis for conflict with humans: foxes have entered houses and attacked domestic animals, killing cats and poultry. About 8% of reported foxes exhibited symptoms of sarcoptic mange, a disease that also infects domestic animals, especially dogs. The proportion of mange-infected foxes was higher in large urban areas. In addition to mange, a substantial fraction of red foxes in Estonia are known to be infected with the life-threatening tapeworm Echinococcus multilocularis, the causative agent of alveolar echinococcosis. Therefore, urban foxes may represent a source of serious infectious disease for pets and humans.
Headaches after traumatic spinal cord injury in Estonia.
Sabre, Liis; Rugo, Mariann; Asser, Toomas; Kõrv, Janika; Braschinsky, Mark
2016-04-01
Patients with traumatic spinal cord injury (TSCI) often suffer from different types of pain. However, headaches after TSCI have not been studied. The aim of this article is to examine the occurrence of headache among patients with TSCI. This cross-sectional study included individuals with TSCI from 1997 to 2012 in Estonia. Patients with TSCI were interviewed via telephone. The interview was based on a questionnaire specifically designed to identify headache type using the International Classification of Headache Disorders, third edition (beta version). There were 73 patients with a mean age 37.1 ± 10.6 years. The mean time since TSCI was 7.5 ± 4.0 years. The most frequently mentioned pain was headache (71%), followed by back pain (60%) and pain in neck (44%).Headaches were more frequent after the trauma compared with the headaches before TSCI (71% vs 51%, ITALIC! p = 0.02). Headaches that arose after TSCI were not related to the concomitant brain injury ( ITALIC! p = 0.15). The occurrence of headache did not depend on the severity or the level of the TSCI.Eighty-five percent of patients had not contacted any physician and headache was not diagnosed. This is the first study that evidentially shows that headache is the most prevalent pain condition after TSCI. Despite this, the majority of patients never consult a physician, nor is their headache diagnosed or appropriately managed. This indicates that further studies are needed to provide evidence regarding the prevalence and causes of headache and its impact on quality of life. © International Headache Society 2015.
Effects of land use on arbuscular mycorrhizal fungal communities in Estonia.
Sepp, Siim-Kaarel; Jairus, Teele; Vasar, Martti; Zobel, Martin; Öpik, Maarja
2018-04-01
Arbuscular mycorrhizal (AM) fungal communities vary across habitat types, as well as across different land use types. Most relevant research, however, has focused on agricultural or other severely human-impacted ecosystems. Here, we compared AM fungal communities across six habitat types: calcareous grassland, overgrown ungrazed calcareous grassland, wooded meadow, farmyard lawn, boreonemoral forest, and boreonemoral forest clear-cut, exhibiting contrasting modes of land use. AM fungi in the roots of a single host plant species, Prunella vulgaris, and in its rhizosphere soil were identified using 454-sequencing from a total of 103 samples from 12 sites in Estonia. Mean AM fungal taxon richness per sample did not differ among habitats. AM fungal community composition, however, was significantly different among habitat types. Both abandonment and land use intensification (clearcutting; trampling combined with frequent mowing) changed AM fungal community composition. The AM fungal communities in different habitat types were most similar in the roots of the single host plant species and most distinct in soil samples, suggesting a non-random pattern in host-fungal taxon interactions. The results show that AM fungal taxon composition is driven by habitat type and land use intensity, while the plant host may act as an additional filter between the available and realized AM fungal species pool.
Analysis of the systems of ventilation of residential houses of Ukraine and Estonia
NASA Astrophysics Data System (ADS)
Savchenko, Olena; Zhelykh, Vasyl; Voll, Hendrik
2017-12-01
The most common ventilation system in residential buildings in Ukraine is natural ventilation. In recent years, due to increased tightness of structures, an increase in the content of synthetic finishing materials in them, the quality of microclimate parameters deteriorated. One of the measures to improve the parameters of indoor air in residential buildings is the use of mechanical inflow and exhaust ventilation system. In this article the regulatory documents concerning the design of ventilation systems in Ukraine and Estonia and the requirements for air exchange in residential buildings are considered. It is established that the existing normative documents in Ukraine are analogous to European norms, which allow design the system of ventilation of residential buildings according to European standards. However, the basis for the design of ventilation systems in Ukraine is the national standards, in which mechanical ventilation, unfortunately, is provided only for the design of high-rise buildings. To maintain acceptable microclimate parameters in residential buildings, it is advisable for designers to apply the requirements for designing ventilation systems in accordance with European standards.
Fatal poisoning in Estonia 2000-2009. Trends in illegal drug-related deaths.
Tuusov, J; Vals, K; Tõnisson, M; Riikoja, A; Denissov, G; Väli, M
2013-01-01
The aim of this study is to provide an overview of deaths caused by poisoning (especially illicit drugs) in Estonia from 2000 to 2009. The data on poisoning deaths (N = 4132) were collected from the autopsy reports of the Estonian Forensic Science Institute. Ethanol poisoning was the most frequent cause of death (N = 1449, 35.1%), followed by carbon monoxide (N = 1151, 27.9%) and poisoning from illicit drugs (N = 888, 21.5%). The study included 3267 male (79.1%) and 865 female fatalities, with the prevalent age group being 35-64 years. Since 2002, deaths from fentanyles have increased sharply and remained at a high level - from 63 cases in 2002 to 138 cases in 2009. This high number indicates that in spite of the state's drug policies, illegal drugs remain easily available and that this area requires more attention. Alcohol abuse prevention policies - restrictions on alcohol advertisements in the media, limitations on sale times and anti-alcohol campaigns concerning traffic - have not brought about a significant decrease in ethanol poisoning. Copyright © 2012 Elsevier Ltd and Faculty of Forensic and Legal Medicine. All rights reserved.
Factors affecting re-vegetation dynamics of experimentally restored extracted peatland in Estonia.
Karofeld, Edgar; Müür, Mari; Vellak, Kai
2016-07-01
Increasing human activity continues to threaten peatlands, and as the area of natural mires declines, our obligation is to restore their ecosystem functions. Several restoration strategies have been developed for restoration of extracted peatlands, including "The moss layer transfer method", which was initiated on the Tässi extracted peatland in central Estonia in May 2012. Three-year study shows that despite the fluctuating water table, rainfall events can compensate for the insufficient moisture for mosses. Total plant cover on the restoration area attained 70 %, of which ~60 % is comprised of target species-Sphagnum mosses. From restoration treatments, spreading of plant fragments had a significant positive effect on the cover of bryophyte and vascular plants. Higher water table combined with higher plant fragments spreading density and stripping of oxidised peat layer affected positively the cover of targeted Sphagnum species. The species composition in the restoration area became similar to that in the donor site in a natural bog. Based on results, it was concluded that the method approved for restoration in North America gives good results also in the restoration of extracted peatland towards re-establishment of bog vegetation under northern European conditions.
Hospitalised neonates in Estonia commonly receive potentially harmful excipients
2012-01-01
Background Information on the neonatal exposure to excipients is limited. Our aim was to describe the extent of excipient intake by Estonian neonates; to classify the excipients according to potential neonatal toxicity and thereby to measure the extent of exposure of neonates to potentially harmful excipients. Methods A prospective cohort study that recorded all medicines prescribed to patients aged below 28 days admitted to Tartu University Hospital from 01.02-01.08 2008 and to Tallinn Children’s Hospital from 01.02- 01.08 2009 was conducted. Excipients were identified from Summaries of Product Characteristics and classified according to toxicity following a literature review. Results 1961 prescriptions comprising 107 medicines were written for 348/490 neonates admitted. A total of 123 excipients were found in 1620 (83%) prescriptions and 93 (87%) medicines. 47 (38%) of these excipients were classified as potentially or known to be harmful to neonates. Most neonates (97%) received at least one medicine (median number 2) with potentially or known to be harmful excipient. Parabens were the most commonly used known to be harmful excipients and sodium metabisulphite the most commonly used potentially harmful excipient, received by 343 (99%) and 297 (85%) of treated neonates, respectively. Conclusions Hospitalised neonates in Estonia are commonly receiving a wide range of excipients with their medication. Quantitative information about excipients should be made available to pharmacists and neonatologists helping them to take into account excipient issues when selecting medicines and to monitor for adverse effects if administration of medicines containing excipients is unavoidable. PMID:22931304
Acrylamide in commercial foods and intake by infants in Estonia.
Elias, Andres; Roasto, Mati; Reinik, Mari; Nelis, Keiu; Nurk, Eha; Elias, Terje
2017-11-01
Acrylamide is formed when certain foods with low moisture are prepared at above 120 ºC, especially those foods containing asparagine and reducing sugars such as glucose and fructose. Acrylamide is a probable carcinogen, and from animal evidence the margins of exposure indicate a concern for neoplastic effects. On a body weight basis infants´ acrylamide intakes are often higher than those of adults. The aim of the study was to determine acrylamide levels in different commercially-available foods and to assess dietary acrylamide intakes by infants. The acrylamide content in samples ranged widely, from
Johnston, Lisa Grazina; Trummal, Aire; Lohmus, Liilia; Ravalepik, Ardi
2009-09-01
This paper examines challenges obtaining representative samples of males who have sex with males (MSM) in Estonia and provides descriptive HIV behavioral data gathered from four cross-sectional surveys; three using the internet, and one using respondent driven sampling (RDS) to recruit MSM in Tallinn and Harju County. Estonian MSM were sampled between March and May in 2004 (n=193), August and November in 2005 (n=146) and September and December in 2007 (n=238) using internet websites. MSM in Tallinn and Harju County were sampled between April and June in 2007 (n=59) using RDS. Recruitment of MSM using RDS did not acquire the calculated sample size. The RDS study reached a less diverse group of MSM than did the internet studies which recruited a larger proportion of MSM who were older, bisexual, having female sexual partners during the last six months, and unlikely to have been tested for HIV. The findings and observations presented in this paper could inform researchers in Estonia, and the region, about the efficacy of and socio-cultural challenges to sampling MSM to collect HIV biological and/or behavioral data.
Freimann, Tiina; Merisalu, Eda
2015-07-01
Rapid changes in the Estonian health care system have placed extra pressure on the nursing profession, but the potential impacts of psychosocial changes have not been investigated. We aimed to explore the work-related psychosocial risk factors and their relationships with mental health problems (MHPs) amongst nurses at the university hospital in Estonia. A cross-sectional survey was undertaken amongst registered nurses at Tartu University Hospital (TUH). Psychosocial work factors and MHPs (stress, somatic symptoms, depressive symptoms and burnout) were measured using version two of the Copenhagen Psychosocial Questionnaire (COPSOQ II). Descriptive statistics and Pearson's r correlation with sequential Bonferroni correction were used to analyse the data. The analysis was based on 404 nurses (45% of the full-time working population of nurses). The highest mean scores recorded for the positive work-related psychosocial factors studied were meaning of work, role clarity, social relationships and mutual trust between employees. The highest scores for the negative factors studied were the demands for hiding emotions, work pace, cognitive and emotional demands. Stress and burnout showed the highest mean scores amongst the MHPs. Quantitative and emotional demands were positively related to all of the studied MHPs, while work pace and role conflicts had a positive correlation with stress and burnout. All of the studied negative psychosocial factors were significantly correlated with burnout. work-related psychosocial risk factors such as quantitative demands work load, emotional demands, work pace and role conflicts, had significant positive relationships with MHPS in nurses in Estonia, and may contribute to high levels of stress as well as burnout amongst nurses: . © 2015 the Nordic Societies of Public Health.
The Colour Test for drug susceptibility testing of Mycobacterium tuberculosis strains.
Toit, K; Mitchell, S; Balabanova, Y; Evans, C A; Kummik, T; Nikolayevskyy, V; Drobniewski, F
2012-08-01
Tartu, Estonia. To assess the performance and feasibility of the introduction of the thin-layer agar MDR/XDR-TB Colour Test (Colour Test) as a non-commercial method of drug susceptibility testing (DST). The Colour Test combines the thin-layer agar technique with a simple colour-coded quadrant format, selective medium to reduce contamination and colorimetric indication of bacterial growth to simplify interpretation. DST patterns for isoniazid (INH), rifampicin (RMP) and ciprofloxacin (CFX) were determined using the Colour Test for 201 archived Mycobacterium tuberculosis isolates. Susceptibilities were compared to blinded DST results obtained routinely using the BACTEC™ Mycobacteria Growth Indicator Tube™ (MGIT) 960 to assess performance characteristics. In all, 98% of the isolates produced interpretable results. The average time to positivity was 13 days, and all results were interpretable. The Colour Test detected drug resistance with 98% sensitivity for INH, RMP and CFX and 99% for multidrug-resistant tuberculosis. Specificities were respectively 100% (95%CI 82-100), 88% (95%CI 69-97) and 91% (95%CI 83-96) and 90% (95%CI 74-98). Agreement between the Colour Test and BACTEC MGIT 960 were respectively 98%, 96%, 94% and 97%. The Colour Test could be an economical, accurate and simple technique for testing tuberculosis strains for drug resistance. As it requires little specialist equipment, it may be particularly useful in resource-constrained settings with growing drug resistance rates.
Kaare, Pille-Riin; Mõttus, René; Konstabel, Kenn
2009-09-01
Due to changes in gambling accessibility during the last decade gambling has become more widespread in Estonia and the prevalence of pathological gambling has sharply increased. The present study attempts to identify psychological characteristics of Estonian pathological gamblers. It has been shown that a wide range of social, economic, and individual factors (e.g. personality traits and emotional states) predict the likelihood of becoming a pathological gambler. In the present study, pathological gamblers' (N = 33) personality traits, self-esteem, self-reported emotional states and cognitive ability were compared to the respective characteristics in a non-gambling control group (N = 42) matched for age, gender and educational level. It was found that compared to controls, pathological gamblers had higher scores on Neuroticism (especially on its immoderation facet) and lower scores on Conscientiousness (especially on its dutifulness and cautiousness facets) and on self-esteem scale. They reported more negative emotional states during the previous month (especially depression and anxiety). Finally, pathological gamblers had lower general cognitive ability. In a logistic regression model, the likelihood of being a pathological gambler was best predicted by high immoderation score and low cognitive ability.
Results From Estonia's 2016 Report Card on Physical Activity for Children and Youth.
Kruusamäe, Helena; Kull, Merike; Mooses, Kerli; Riso, Eva-Maria; Jürimäe, Jaak
2016-11-01
The 2016 Report Card on Physical Activity for Children and Youth, the first of its kind, aims to set baseline physical activity (PA) indicators using the Active Healthy Kids Global Alliance grading system. A research work group analyzed and selected data for the grade assignment meeting (GAM). During the GAM, 17 leading researchers and policy experts from Estonia assessed the data and assigned grades for each of the 9 PA indicators. In addition, recommendations were provided for further actions to improve the grades. Grades from A (highest) to F (lowest) were assigned as follows: 1) Overall PA (F); 2) Organized Sport (C); 3) Active Play [incomplete data (INC)]; 4) Active Transportation (INC); 5) Sedentary Behaviors (F); 6) Family and Peers (C); 7) School (C); 8) Community and the Built Environment (B); and 9) Government (C). An indicator was marked as incomplete (INC) when there was a lack of representative quality data. Evidence suggests that PA levels of Estonian children remain very low, despite moderately supportive social, environmental, and regulatory factors. There are many challenges to overcome in supporting and promoting PA of children and youth (eg, cross-sectional cooperation, implementing interventions, changing social norms, empowerment of parents and educational institutions).
ERIC Educational Resources Information Center
Heikkinen, Anja, Ed.; Jogi, Larissa, Ed.; Jutte, Wolfgang, Ed.; Zarifis, Georgios K., Ed.
2012-01-01
This edited volume contains the papers presented in the 2nd ESREA|ReNAdet meeting that was jointly organised with the VET & CULTURE Network in the University of Tallinn (Estonia), 9-11 November 2011. The papers that appear in the volume discuss the future (or the futures) of adult educators in respect to issues of developing their identities…
Avi, Radko; Huik, Kristi; Pauskar, Merit; Ustina, Valentina; Karki, Tõnis; Kallas, Eveli; Jõgeda, Ene-Ly; Krispin, Tõnu; Lutsar, Irja
2014-03-01
The presence of transmitted drug resistance (TDR) in treatment-naive HIV-1-positive subjects is of concern, especially in the countries of the former Soviet Union in which the number of subjects exposed to antiretrovirals (ARV) has exponentially increased during the past decade. We assessed the rate of TDR among newly diagnosed subjects in Estonia in 2010 and compared it to that in 2008. The study included 325 subjects (87% of all subjects tested HIV positive from January 1 to December 31, 2010). Of the 244 sequenced viral genomic RNA in the reverse transcriptase (RT) region 214 were CRF06_cpx, nine were subtype A1, three (one each) were subtype B and subtype C, CRF02_AG, and CRF03_AB; 15 viruses remained unclassified as putative recombinant forms between CRF06_cpx and subtype A1. HIV-1 TDR mutations in 2010 and 2008 (n=145) occurred at similar frequency in 4.5% (95% CI 2.45; 7.98) and 5.5% (95% CI 1.8; 9.24) of the patients, respectively. In 2010, 2.5% (6/244) of the sequences harbored nonnucleoside reverse transcriptase inhibitor (NNRTI) (K103N and K101E), 1.6% (4/244) nucleoside reverse transcriptase inhibitor (NRTI) (M41L, M184I, and K219E), and 0.4% (1/244) protease inhibitor (PI) (V82A) mutations. Our findings indicate that in spite of the increased consumption of ARVs the rate of TDR in Estonia has remained unchanged over the past 3 years. Similar stabilizing or even decreasing trends have been described in Western Europe and North America albeit at higher levels and in different socioeconomic backgrounds.
NASA Astrophysics Data System (ADS)
Toll, Velle; Männik, Aarne; Luhamaa, Andres; Rõõm, Rein
2015-05-01
On August 8, 2010, a derecho swept over Northern Europe, causing widespread wind damage and more than 2 million Euros in economic loss in Estonia during its most destructive stage. This paper presents a modelling study of the derecho-producing storm utilising the Hirlam Aladin Research for Mesoscale Operational Numerical Weather Prediction in Europe (HARMONIE) model. The model setup is chosen to mimic near-future, nearly kilometre-scale, operational environments in European national weather services. The model simulations are compared to remote sensing and in situ observations. The HARMONIE model is capable of reproducing the wind gust severity and precipitation intensity. Moreover, 2.5-km grid spacing is shown to be sufficient for producing a reliable signal of the severe convective storm. Storm dynamics are well simulated, including the rear inflow jet. Although the model performance is promising, a strong dependence on the initial data, a weak trailing stratiform precipitation region and an incorrect timing of the storm are identified.
Heikkinen, Rauno; Kivastik, Jana; Kingisepp, Peet-Henn; Hirvonen, Leo; Näyhä, Simo
2006-01-01
To provide information on smoking differences between university faculties. Data from smoking surveys performed on 1,441 staff members and 2,308 students at the University of Tartu, Estonia, soon after the fall of communism, were analysed by faculties, using similar data from the University of Oulu, Finland (1,830 staff members, 5,947 students) for reference. Wide variations in smoking were found between faculties in Tartu, the prevalence being high among male students of theology (54%) and low among staff and students in the faculties of exercise & sports sciences (< 5%) and mathematics (< 15%). Less variation was seen in Oulu. The medical faculty showed low smoking rates in Oulu but not in Tartu. High percentages of smokers were typical of Tartu faculties representing disciplines closely connected with the country's transition (e.g. theology), and low percentages in faculties emphasising physical and mental performance (e.g. sports). The relatively high percentage of smokers in the Tartu medical faculty compared with that in Oulu can be interpreted as delayed diffusion of medical information beyond the former Iron Curtain.
NASA Astrophysics Data System (ADS)
Latisov, Eduard; Kleesmaa, Juri; Siirde, Andres
2010-01-01
The goal of this paper is to estimate the effects of pollution charges, ash handling and of the carbon dioxide quota trade on the competitiveness of natural gas, oil shale, peat and wood chips in Estonia for 2010 and 2015. The pollution charges and levels are calculated based on the
Sex work in Tallinn, Estonia: the sociospatial penetration of sex work into society.
Aral, S O; St Lawrence, J S; Uusküla, A
2006-10-01
It is important to describe and understand the underlying patterns and dynamics that govern sex work in societies undergoing rapid political and social changes, its heterogeneity across populations, and its evolution through time in order to inform future research, sound policy formation, and programme delivery. To describe the socioeconomic and cultural determinants, organisational structure, distinct categories, and spatial patterning of sex work in Tallinn, Estonia, and identify recent temporal changes in sex work patterns. In-depth interviews with key informants; naturalistic observations of sex work and drug use venues, geo-mapping of sex work sites, review of media, public policy, and commissioned reports, and analyses of existing data. Sex work takes place in a hierarchy of locations in Tallinn ranging from elite brothels and "love flats" to truck stops. These sites vary in terms of their public health importance and social organisation. There are full time, part time, and intermittent male and female sex workers. Among others, the taxi driver, madam and the bartender are central roles in the organisation of sex work in Tallinn. Cell phone and internet technology enable sex work to be highly dispersed and spatially mobile. Future research and programmatic service delivery or outreach efforts should respond to the changing profile of sex work in Tallinn and its implications for STD/HIV epidemiology.
Why is a “Good Abortion Law” Not Enough? The Case of Estonia
2017-01-01
Abstract There are various ways to critically discuss abortion. Constructing or finding the most suitable analytical framework—whether rooted in legal formalism, socio-legal considerations, or comparativism—always depends on the country of subject and whether the analysis is for litigation, advocacy, or more theoretical purposes. This paper offers a model for analyzing abortion in Estonia in order to connect it as a thought-provoking case study to the ongoing transnational abortion discussions. I set out by describing the Estonian Abortion Act as a “good abortion law”: a regulation that guarantees in practice women’s legal access to safe abortion. Despite this functioning law, I carve a space for criticism by expanding the conversation to the broader power relations and gender dynamics present in Estonian society. Accordingly, I explain the state of the Estonian feminist movement and gender research, the local legal community’s minimal engagement with the reproductive rights discourse, and the lingering Soviet-era narratives of reproduction and health, which were not fully extinguished by the combination of human rights commitments and neoliberalism upon restoration of independence in the early 1990s. I consequently show that Estonia’s liberal abortion regulation is not grounded in a sufficiently deep understanding of human rights-based approaches to reproductive health, therefore leaving the door open for micro-aggressions toward women and for conservative political winds to gain ground. PMID:28630549
Sex work in Tallinn, Estonia: the sociospatial penetration of sex work into society
Aral, S O; Lawrence, J S St; Uusküla, A
2006-01-01
Background It is important to describe and understand the underlying patterns and dynamics that govern sex work in societies undergoing rapid political and social changes, its heterogeneity across populations, and its evolution through time in order to inform future research, sound policy formation, and programme delivery. Objectives To describe the socioeconomic and cultural determinants, organisational structure, distinct categories, and spatial patterning of sex work in Tallinn, Estonia, and identify recent temporal changes in sex work patterns. Methods In‐depth interviews with key informants; naturalistic observations of sex work and drug use venues, geo‐mapping of sex work sites, review of media, public policy, and commissioned reports, and analyses of existing data. Results Sex work takes place in a hierarchy of locations in Tallinn ranging from elite brothels and “love flats” to truck stops. These sites vary in terms of their public health importance and social organisation. There are full time, part time, and intermittent male and female sex workers. Among others, the taxi driver, madam and the bartender are central roles in the organisation of sex work in Tallinn. Cell phone and internet technology enable sex work to be highly dispersed and spatially mobile. Conclusion Future research and programmatic service delivery or outreach efforts should respond to the changing profile of sex work in Tallinn and its implications for STD/HIV epidemiology. PMID:16807288
NASA Technical Reports Server (NTRS)
Freed, Alan D.
1995-01-01
The purpose of this paper is to present a consistent and thorough development of the strain and strain-rate measures affiliated with Hencky. Natural measures for strain and strain-rate, as I refer to them, are first expressed in terms of of the fundamental body-metric tensors of Lodge. These strain and strain-rate measures are mixed tensor fields. They are mapped from the body to space in both the Eulerian and Lagrangian configurations, and then transformed from general to Cartesian fields. There they are compared with the various strain and strain-rate measures found in the literature. A simple Cartesian description for Hencky strain-rate in the Lagrangian state is obtained.
NASA Technical Reports Server (NTRS)
Freed, Alan D.
1997-01-01
Logarithmic strain is the preferred measure of strain used by materials scientists, who typically refer to it as the "true strain." It was Nadai who gave it the name "natural strain," which seems more appropriate. This strain measure was proposed by Ludwik for the one-dimensional extension of a rod with length l. It was defined via the integral of dl/l to which Ludwik gave the name "effective specific strain." Today, it is after Hencky, who extended Ludwik's measure to three-dimensional analysis by defining logarithmic strains for the three principal directions.
Lashkevich, V A
2013-01-01
In 1958 Poliomyelitis Institute in Moscow and Institute of Experimental Medicine in St. Petersburg received from A. Sabin the attenuated strains of poliomyelitis virus. The characteristics of the strains were thoroughly studied by A. A. Smorodintsev and coworkers. They found that the virulence of the strains fluctuated slightly in 10 consecutive passages through the intestine of the non-immune children. A part of the Sabin material was used by A. A. Smorodintsev and M. P. Chumakov in the beginning of 1959 for immunizing approximately 40000 children in Estonia, Lithuania, and Latvia. Epidemic poliomyelitis rate in these republics decreased from approximately 1000 cases yearly before vaccination to less than 20 in the third quarter of 1959. This was a convincing proof of the efficacy and safety of the vaccine from the attenuated Sabin strains. In 1959, according to A. Sabin's recommendation, a technology of live vaccine production was developed at the Poliomyelitis Institute, and several experimental lots of vaccine were prepared. In the second part of 1959, 13.5 million children in USSR were immunized. The epidemic poliomyelitis rate decreased 3-5 times in different regions without paralytic cases, which could be attributed to the vaccination. These results were the final proof of high efficiency and safety of live poliomyelitis vaccine from the attenuated Sabin strains. Based on these results, A. Sabin and M. P. Chumakov suggested in 1960 the idea of poliomyelitis eradication using mass immunization of children with live vaccine. 72 million persons up to 20 years old were vaccinated in USSR in 1960 with a 5 times drop in the paralytic rate. 50-year-long use of live vaccine results in poliomyelitis eradication in almost all countries worldwide. More than 10 million children were rescued from the death and palsy. Poliomyelitis eradication in a few countries where it still exists depends not on medical services but is defined by the attitude of their leaders to fight
Voracek, Martin; Loibl, Lisa Mariella; Swami, Viren; Vintilă, Mona; Kõlves, Kairi; Sinniah, Dhachayani; Pillai, Subash Kumar; Ponnusamy, Subramaniam; Sonneck, Gernot; Furnham, Adrian; Lester, David
2008-12-01
The genetics of suicide is increasingly recognized and relevant for mental health literacy, but actual beliefs may lag behind current knowledge. We examined such beliefs in student samples (total N = 686) from Estonia, Malaysia, Romania, the United Kingdom, and the United States with the Beliefs in the Inheritance of Risk Factors for Suicide Scale. Cultural effects were small, those of key demographics nil. Several facets of construct validity were demonstrated. Marked differences in perceived plausibility of evidence about the genetics of suicide according to research design, observed in all samples, may be of general interest for investigating lay theories of abnormal behavior and communicating behavioral and psychiatric genetic research findings.
The member of the Academy H.P. Keres and the Relativity theory in Estonia
NASA Astrophysics Data System (ADS)
Kuusk, P.; Muursepp, P. V.; Piir, Ivar
1987-10-01
The first popular lecture on the Einstein theory of relativity was given in Estonia already in 1914 by Jaan Sarv (1877-1954)[1],afterwards a professor of mathematics at the Tartu University. The first student courses on special relativity were delivered by Professor of Mathematics Juri Nuut (1892-1952): non-Euclidean geometry (1930), the mathematical theory of relativity (1932/1933),the Lorenz transformations (1937). His own research work concerned the Lobachevsky geometry [7] and its application to cosmology [6]. Harald Keres qraguated from the Tartu University in 1936. He gave the first student course on general relativity (based on books [11-14]in 1940.In 1942,he got the dr.phil.nat degree form the Tartu University for his theses "Raum und Zeit in der allgemeinen Relativitatstheorie". The degree of the doctor of mathematical and physical sciences was confirmed by VAK (the All-Union Higher Attestation Commission) in 1949.In this period, he got aquainted with the leading Soviet scientists working on General Relativity, prof.V.A.Fock,Prof.D.D.Ivanenko,Prof.A.Z.Petrov,and Prof.M.F.Shirokov. After World War two all-union university courses were introduced in Tartu State University. According to the curriculum of the course the special theory of relativity is a part of electrodynamics obligatory for all students of the department of Physics. From 1947 till 1985 this course was delivered by Prof.PaulKard(1914-1985).He also published a number of text-books on the subject [15-19]. The general theory of relativity was read by Prof.H.Keres in 1951-1960 and later by his pupils R.Lias and A.Koppel [20-23] as a special course for students specializing in theoretical Physics. The first PHD-s in general relativity were made by R.Lias [27](1954) and I.Piir [28] (1955). In 1961, Prof.H.Keres was elected a member of the Academy of Sciences of the Estonian S.S.R. He left the TArtu State University and began to work in the Institute of Physics as the head of the Department of
Serrano-Fernandez, Pablo; Dymerska, Dagmara; Kurzawski, Grzegorz; Derkacz, Róża; Sobieszczańska, Tatiana; Banaszkiewicz, Zbigniew; Roomere, Hanno; Oitmaa, Eneli; Metspalu, Andres; Janavičius, Ramūnas; Elsakov, Pavel; Razumas, Mindaugas; Petrulis, Kestutis; Irmejs, Arvīds; Miklaševičs, Edvīns; Scott, Rodney J.; Lubiński, Jan
2015-01-01
The continued identification of new low-penetrance genetic variants for colorectal cancer (CRC) raises the question of their potential cumulative effect among compound carriers. We focused on 6 SNPs (rs380284, rs4464148, rs4779584, rs4939827, rs6983267, and rs10795668), already described as risk markers, and tested their possible independent and combined contribution to CRC predisposition. Material and Methods. DNA was collected and genotyped from 2330 unselected consecutive CRC cases and controls from Estonia (166 cases and controls), Latvia (81 cases and controls), Lithuania (123 cases and controls), and Poland (795 cases and controls). Results. Beyond individual effects, the analysis revealed statistically significant linear cumulative effects for these 6 markers for all samples except of the Latvian one (corrected P value = 0.018 for the Estonian, corrected P value = 0.0034 for the Lithuanian, and corrected P value = 0.0076 for the Polish sample). Conclusions. The significant linear cumulative effects demonstrated here support the idea of using sets of low-risk markers for delimiting new groups with high-risk of CRC in clinical practice that are not carriers of the usual CRC high-risk markers. PMID:26101521
Serrano-Fernandez, Pablo; Dymerska, Dagmara; Kurzawski, Grzegorz; Derkacz, Róża; Sobieszczańska, Tatiana; Banaszkiewicz, Zbigniew; Roomere, Hanno; Oitmaa, Eneli; Metspalu, Andres; Janavičius, Ramūnas; Elsakov, Pavel; Razumas, Mindaugas; Petrulis, Kestutis; Irmejs, Arvīds; Miklaševičs, Edvīns; Scott, Rodney J; Lubiński, Jan
2015-01-01
The continued identification of new low-penetrance genetic variants for colorectal cancer (CRC) raises the question of their potential cumulative effect among compound carriers. We focused on 6 SNPs (rs380284, rs4464148, rs4779584, rs4939827, rs6983267, and rs10795668), already described as risk markers, and tested their possible independent and combined contribution to CRC predisposition. Material and Methods. DNA was collected and genotyped from 2330 unselected consecutive CRC cases and controls from Estonia (166 cases and controls), Latvia (81 cases and controls), Lithuania (123 cases and controls), and Poland (795 cases and controls). Results. Beyond individual effects, the analysis revealed statistically significant linear cumulative effects for these 6 markers for all samples except of the Latvian one (corrected P value = 0.018 for the Estonian, corrected P value = 0.0034 for the Lithuanian, and corrected P value = 0.0076 for the Polish sample). Conclusions. The significant linear cumulative effects demonstrated here support the idea of using sets of low-risk markers for delimiting new groups with high-risk of CRC in clinical practice that are not carriers of the usual CRC high-risk markers.
Sõukand, Renata; Kalle, Raivo; Svanberg, Ingvar
2010-01-01
Extensive folklore records from pre-modern Estonia give us an excellent opportunity to study a variety of local plant knowledge and plant use among the peasantry in various parts of the country. One important biocultural domain where plant knowledge has been crucial was in the various methods of combating different ectoparasites that cohabited and coexisted with humans and their domestic animals. Some of these methods were widely known (world-wide, Eurasia, Europe, Baltic Rim), while others were more local. Here we discuss ways of reducing clothes moths Tineola bisselliella (Hummel) (Lepidoptera: Tineidae), human fleas Pulex irritons L. (Siphonaptera: Pulicidae) and bedbugs Cimex lectularius L. (Hemiptera: Cimicidae) with the help of plants. Various taxa used as traditional repellents have been identified. The use of plants as repellents and their toxic principles are also discussed from a comparative perspective. PMID:21070174
Sõukand, Renata; Kalle, Raivo; Svanberg, Ingvar
2010-01-01
Extensive folklore records from pre-modern Estonia give us an excellent opportunity to study a variety of local plant knowledge and plant use among the peasantry in various parts of the country. One important biocultural domain where plant knowledge has been crucial was in the various methods of combating different ectoparasites that cohabited and coexisted with humans and their domestic animals. Some of these methods were widely known (world-wide, Eurasia, Europe, Baltic Rim), while others were more local. Here we discuss ways of reducing clothes moths Tineola bisselliella (Hummel) (Lepidoptera: Tineidae), human fleas Pulex irritons L. (Siphonaptera: Pulicidae) and bedbugs Cimex lectularius L. (Hemiptera: Cimicidae) with the help of plants. Various taxa used as traditional repellents have been identified. The use of plants as repellents and their toxic principles are also discussed from a comparative perspective.
Highly stretchable miniature strain sensor for large dynamic strain measurement
Song, Bo; Yao, Shurong; Nie, Xu; ...
2016-01-01
In this paper, a new type of highly stretchable strain sensor was developed to measure large strains. The sensor was based on the piezo-resistive response of carbon nanotube (CNT)/polydimethylsiloxane (PDMS) composite thin films. The piezo-resistive response of CNT composite gives accurate strain measurement with high frequency response, while the ultra-soft PDMS matrix provides high flexibility and ductility for large strain measurement. Experimental results show that the CNT/PDMS sensor measures large strains (up to 8 %) with an excellent linearity and a fast frequency response. The new miniature strain sensor also exhibits much higher sensitivities than the conventional foil strain gages,more » as its gauge factor is 500 times of that of the conventional foil strain gages.« less
Demonstration test of burner liner strain measurements using resistance strain gages
NASA Technical Reports Server (NTRS)
Grant, H. P.; Anderson, W. L.
1984-01-01
A demonstration test of burner liner strain measurements using resistance strain gages as well as a feasibility test of an optical speckle technique for strain measurement are presented. The strain gage results are reported. Ten Kanthal A-1 wire strain gages were used for low cycle fatigue strain measurements to 950 K and .002 apparent strain on a JT12D burner can in a high pressure (10 atmospheres) burner test. The procedure for use of the strain gages involved extensive precalibration and postcalibration to correct for cooling rate dependence, drift, and temperature effects. Results were repeatable within + or - .0002 to .0006 strain, with best results during fast decels from 950 K. The results agreed with analytical prediction based on an axisymmetric burner model, and results indicated a non-uniform circumferential distribution of axial strain, suggesting temperature streaking.
Kurppa, Kari; Tammaru, Eva; Kempinen, Marina; Rünkla, Ester; Sõrra, Jaan; Lehtinen, Suvi
2006-01-01
A sectoral network on occupational health and safety in agriculture has been established in Estonia as part of a project that provided support for Estonian accession into European Union. Participating organizations represent farmers' unions at county level, agricultural enterprises, workers' representatives, universities and agricultural expert institutions, and government agencies. The purpose is to provide a shared infrastructure that combines information and other capacities of several organizations and provides a platform for dialogue and co-operation in order to make a greater impact with available resources. The network has a decentralized architecture and is technically managed by an institutionalized secretariat. The network's task forces have compiled a network directory, summarised the capacities and interests of member organizations, made an inventory of existing information and training materials, developed an overall strategy for information management, established an information repository on the Internet, prepared promotional materials, and devised a protocol for agricultural walk-though assessment. A profile on occupational health and safety in Estonian agriculture has been compiled with a rapid assessment approach that collected both quantitative and qualitative information from secondary sources (statistics, documents) and from focus group discussions. The profile is used as an instrument for taking occupational health and safety needs in agriculture into discussion on political arena.
Haldre, Kai; Part, Kai; Ketting, Evert
2012-10-01
A new school curriculum was introduced in Estonia in 1996 comprising for the first time sexuality education (SE) topics. The first youth counselling centres (YCCs) addressing sexual health matters were set up in 1991-1992. This study describes the development of school-based SE and YCCs in 1992 - 2009, and explores the concurrent changes in sexuality-related knowledge, behaviour, and sexual health indicators. The analyses are based on 12 population-based surveys. Data on births, abortions and sexually transmitted infections, including HIV, are taken from national registers. By the middle of the past decade SE was well established. There has been a trend towards younger age at first sexual intercourse, and increased usage of condoms and reliable contraceptive methods. The abortion rate among 15-19-year-olds declined by 61% and their fertility rate by 59%. The annual number of registered new HIV cases among 15-19-year-olds dropped from 560 in 2001 to 25 in 2009, new syphilis cases from 116 in 1998 to two in 2009, and gonorrhoea cases from 263 in 1998 to 20 in 2009. This study documents considerable improvements in sexual health indicators of youths, and indicates that these run parallel to the development of school-based SE and YCCs.
Volmer, Dasy; Raal, Ain; Kalle, Raivo; Sõukand, Renata
2016-01-01
The aim of the cross-sectional study was to evaluate the pattern of complementary self-treatment with P. ginseng and its analogues amongst pharmacy customers in Estonia. The study instrument consisted of multiple-choice items related to personal knowledge about and experience with the use of P. ginseng and its analogues. In total, 1233 customers participated in the study. Of study participants, 18.1% reported the use of P. ginseng and its analogues in their lives. P. ginseng preparations were used mostly according to the well- known indications (tiredness, weakness and decreased mental and physical capacity). Of P. ginseng users 44.3% reported positive treatment effects and 12.0% had experienced different side effects. With increase of age (p < 0.01) and at lower levels of education (p = 0.04), the use of ginseng or its analogues decreased. The better the users evaluated their health, the better they perceived the effect of P. ginseng preparations (p < 0.01). This study reported rather frequent use of P. ginseng and its analogues. P. ginseng could be seen in the treatment of conditions, where the use of local medicinal plants has not been established. Further research is needed to learn more about public knowledge and experiences about efficacy and safety of P. ginseng and its analogues.
Merisalu, Eda; Männik, Georg; Põlluste, Kaja
2014-01-01
The aim of the study was to explore the role of managerial style, work environment factors and burnout in determining job satisfaction during the implementation of quality improvement activities in a dental clinic. Quantitative research was carried out using a prestructured anonymous questionnaire to survey 302 respondents in Kaarli Dental Clinic, Estonia. Dental clinic staff assessed job satisfaction, managerial style, work stress and burnout levels through the implementation period of ISO 9000 quality management system in 2003 and annually during 2006-2009. Binary logistic regression was used to explain the impact of satisfaction with management and work organisation, knowledge about managerial activities, work environment and psychosocial stress and burnout on job satisfaction. The response rate limits were between 60% and 89.6%. Job satisfaction increased significantly from 2003 to 2006 and the percentage of very satisfied staff increased from 17 to 38 (p<0.01) over this period. In 2007, the proportion of very satisfied people dropped to 21% before increasing again in 2008-2009 (from 24% to 35%). Binary logistic regression analysis resulted in a model that included five groups of factors: managerial support, information about results achieved and progress to goals, work organisation and working environment, as well as factors related to career, security and planning. The average scores of emotional exhaustion showed significant decrease, correlating negatively with job satisfaction (p<0.05). The implementation of quality improvement activities in the Kaarli Dental Clinic has improved the work environment by decreasing burnout symptoms and increased job satisfaction in staff.
Nøhr, Christian; Parv, Liisa; Kink, Pille; Cummings, Elizabeth; Almond, Helen; Nørgaard, Jens Rahbek; Turner, Paul
2017-08-07
Most countries face an ageing population, increasing chronic diseased, and constrictions on budget for providing health services. Involving patients in their own care by allowing them access to their patient data is a trend seen in many places. Data on the type and level of access citizens have to their own health data in three countries was gathered from public sources. Data from each individual country is presented and the experiences of Denmark, Estonia and Australia are examined whilst similarities and differences explored. The discussion adopts a citizen-centred perspective to consider how the different e-portal systems support, protect and structure citizen interactions with their own health data in three key areas: Security, privacy and data protection; User support; and Citizen adoption and use. The paper highlights the impact of opt-in/opt-out approaches on citizen access and the lack of a structured approach to addressing differences in citizen health and e-health literacy. This research also confirms while current data provides detail on the availability and use of personal health data by citizens, questions still remain over the ultimate impact on patient outcomes of these initiatives. It is anticipated the insights generated from the three countries experiences, supporting citizen access to their health data will be useful to improve these initiatives and guide other countries aspiring to support similar initiatives.
Development of intra-strain self-cloning procedure for breeding baker's yeast strains.
Nakagawa, Youji; Ogihara, Hiroyuki; Mochizuki, Chisato; Yamamura, Hideki; Iimura, Yuzuru; Hayakawa, Masayuki
2017-03-01
Previously reported self-cloning procedures for breeding of industrial yeast strains require DNA from other strains, plasmid DNA, or mutagenesis. Therefore, we aimed to construct a self-cloning baker's yeast strain that exhibits freeze tolerance via an improved self-cloning procedure. We first disrupted the URA3 gene of a prototrophic baker's yeast strain without the use of any marker gene, resulting in a Δura3 homozygous disruptant. Then, the URA3 gene of the parental baker's yeast strain was used as a selection marker to introduce the constitutive TDH3 promoter upstream of the PDE2 gene encoding high-affinity cyclic AMP phosphodiesterase. This self-cloning procedure was performed without using DNA from other Saccharomyces cerevisiae strains, plasmid DNA, or mutagenesis and was therefore designated an intra-strain self-cloning procedure. Using this self-cloning procedure, we succeeded in producing self-cloning baker's yeast strains that harbor the TDH3p-PDE2 gene heterozygously and homozygously, designated TDH3p-PDE2 hetero and TDH3p-PDE2 homo strains, respectively. These self-cloning strains expressed much higher levels of PDE2 mRNA than the parental strain and exhibited higher viability after freeze stress, as well as higher fermentation ability in frozen dough, when compared with the parental strain. The TDH3p-PDE2 homo strain was genetically more stable than the TDH3p-PDE2 hetero strain. These results indicate that both heterozygous and homozygous strains of self-cloning PDE2-overexpressing freeze-tolerant strains of industrial baker's yeast can be prepared using the intra-strain self-cloning procedure, and, from a practical viewpoint, the TDH3p-PDE2 homo strain constructed in this study is preferable to the TDH3p-PDE2 hetero strain for frozen dough baking. Copyright © 2016 The Society for Biotechnology, Japan. Published by Elsevier B.V. All rights reserved.
Noel, B.W.; Smith, D.L.; Sinha, D.N.
1988-06-28
A strain gage comprising a strained-layer superlattice crystal exhibiting piezoelectric properties is described. A substrate upon which such a strained-layer superlattice crystal has been deposited is attached to an element to be monitored for strain. A light source is focused on the superlattice crystal and the light reflected from, passed through, or emitted from the crystal is gathered and compared with previously obtained optical property data to determine the strain in the element. 8 figs.
NASA Astrophysics Data System (ADS)
Nõmmiste, Ergo; Kirm, Marco; Plank, Toomas
2014-04-01
The annual international conference Functional Materials and Nanotechnologies (FM&NT) was started in 2006 by scientists from the Institute of Solid State Physics, University of Latvia. The warm welcome and open atmosphere of this scientific conference has turned it into an event where people from different countries and different fields come and meet under the shared umbrella of functional materials and nanotechnology. It is particularly important for early stage scientists who are looking for new knowledge and contacts with people from various fields to build their own network. Our Latvian colleagues, with their success in internationalization, made us neighbouring Estonians so jealous that we could not help but propose organising the conference every second year in Estonia. In a way, this conference is a continuation of the idea of the famous Baltic seminars which took place over several decades in the last century. Due to political constraints, these seminars were only open to scientists of former Eastern Europe countries, but had a great popularity and attendance from over the whole Soviet Union. Many collaborations started from the initial personal contact between scientists at these twice yearly seminars, held alternately in Latvia and Estonia. At the FM&NT 2012 conference, the decision was made that Institute of Physics, University of Tartu would organise the next event in Tartu in 2013. FM&NT-2013 was hence held in Tartu (Estonia) from 21-24 April 2013 at the Dorpat Conference Centre. The main selected topics of the conference were: (i) multifunctional materials, (ii) nanomaterials, (iii) materials for sustainable energy applications and (vi) theory. Additionally, the focus in this conference was on studies with the help of synchrotron radiation and other novel light sources such as free electron lasers. The conference provided an opportunity for 300 scientists from 21 countries to meet, establish contacts, exchange knowledge and discuss their research
Measurement of high temperature strain by the laser-speckle strain gauge
NASA Technical Reports Server (NTRS)
Yamaguchi, I.
1984-01-01
By using the laser-speckle strain gauge, the strain of metal at the temperature lower than 250 C is measured. The principle of the gauge is to measure the expansion or contraction of the fine structures of surface by detecting the resultant speckle displacement in an optoelectronic way, whereby the effect of rigid-body motion is automatically cancelled out with the aid of a differential detection system. A transportable apparatus was built and a comparison experiment performed with a resistance strain gauge at room temperature. It has a strain sensitivity of .00002, a gauge length smaller than 1 mm, and no upper limit in a range of strain measurement. In the measurement of high-temperature strain it is free from the need for a dummy gauge and insensitive to an electric drift effect. As examples of strain measurement at high-temperature, thermal expansion and contraction of a top of a soldering iron are measured. The interval of the measurement can be made at shortest 1.6 sec. and the change in the strain is clearly followed until the ultimate stationary temperature is reached.
Deus, K. M.; Saavedra-rodriguez, K.; Butters, M. P.; Black, W. C.; Foy, B. D.
2014-01-01
Seven different strains of Aedes aegypti (L.), including a genetically diverse laboratory strain, three laboratory-selected permethrin-resistant strains, a standard reference strain, and two recently colonized strains were fed on human blood containing various concentrations of ivermectin. Ivermectin reduced adult survival, fecundity, and hatch rate of eggs laid by ivermectin-treated adults in all seven strains. The LC50 of ivermectin for adults and the concentration that prevented 50% of eggs from hatching was calculated for all strains. Considerable variation in adult survival after an ivermectin-bloodmeal occurred among strains, and all three permethrin-resistant strains were significantly less susceptible to ivermectin than the standard reference strain. The hatch rate after an ivermectin bloodmeal was less variable among strains, and only one of the permethrin-resistant strains differed significantly from the standard reference strain. Our studies suggest that ivermectin induces adult mortality and decreases the hatch rate of eggs through different mechanisms. A correlation analysis of log-transformed LC50 among strains suggests that permethrin and ivermectin cross-resistance may occur. PMID:22493855
Haemophilus ducreyi Cutaneous Ulcer Strains Are Nearly Identical to Class I Genital Ulcer Strains
Gangaiah, Dharanesh; Webb, Kristen M.; Humphreys, Tricia L.; Fortney, Kate R.; Toh, Evelyn; Tai, Albert; Katz, Samantha S.; Pillay, Allan; Chen, Cheng-Yen; Roberts, Sally A.; Munson, Robert S.; Spinola, Stanley M.
2015-01-01
Background Although cutaneous ulcers (CU) in the tropics is frequently attributed to Treponema pallidum subspecies pertenue, the causative agent of yaws, Haemophilus ducreyi has emerged as a major cause of CU in yaws-endemic regions of the South Pacific islands and Africa. H. ducreyi is generally susceptible to macrolides, but CU strains persist after mass drug administration of azithromycin for yaws or trachoma. H. ducreyi also causes genital ulcers (GU) and was thought to be exclusively transmitted by microabrasions that occur during sex. In human volunteers, the GU strain 35000HP does not infect intact skin; wounds are required to initiate infection. These data led to several questions: Are CU strains a new variant of H. ducreyi or did they evolve from GU strains? Do CU strains contain additional genes that could allow them to infect intact skin? Are CU strains susceptible to azithromycin? Methodology/Principal Findings To address these questions, we performed whole-genome sequencing and antibiotic susceptibility testing of 5 CU strains obtained from Samoa and Vanuatu and 9 archived class I and class II GU strains. Except for single nucleotide polymorphisms, the CU strains were genetically almost identical to the class I strain 35000HP and had no additional genetic content. Phylogenetic analysis showed that class I and class II strains formed two separate clusters and CU strains evolved from class I strains. Class I strains diverged from class II strains ~1.95 million years ago (mya) and CU strains diverged from the class I strain 35000HP ~0.18 mya. CU and GU strains evolved under similar selection pressures. Like 35000HP, the CU strains were highly susceptible to antibiotics, including azithromycin. Conclusions/Significance These data suggest that CU strains are derivatives of class I strains that were not recognized until recently. These findings require confirmation by analysis of CU strains from other regions. PMID:26147869
Factors affecting finite strain estimation in low-grade, low-strain clastic rocks
NASA Astrophysics Data System (ADS)
Pastor-Galán, Daniel; Gutiérrez-Alonso, Gabriel; Meere, Patrick A.; Mulchrone, Kieran F.
2009-12-01
The computer strain analysis methods SAPE, MRL and DTNNM have permitted the characterization of finite strain in two different regions with contrasting geodynamic scenarios; (1) the Talas Ala Tau (Tien Shan, Kyrgyzs Republic) and (2) the Somiedo Nappe and Narcea Antiform (Cantabrian to West Asturian-Leonese Zone boundary, Variscan Belt, NW of Iberia). The performed analyses have revealed low-strain values and the regional strain trend in both studied areas. This study also investigates the relationship between lithology (grain size and percentage of matrix) and strain estimates the two methodologies used. The results show that these methods are comparable and the absence of significant finite strain lithological control in rocks deformed under low metamorphic and low-strain conditions.
Outcomes associated with anxiety and depression among men who have sex with men in Estonia.
Parker, R David; Lõhmus, Liilia; Valk, Anti; Mangine, Cara; Rüütel, Kristi
2015-09-01
Evidence supports that gay, lesbian, and transgender populations are at increased risk for mental health problems. The current study was conducted to estimate the prevalence of anxiety and depressive symptoms and related factors among men who have sex with men (MSM) in Estonia. This is the only known study of its type in the Eastern European region. In 2013, an Internet-based survey was conducted among men who have sex with men, collecting data on socio-demographics, sexuality, drug and alcohol use, mental health, suicidality, and internalized homonegativity. 265 MSM completed the questionnaire (median age 31 years, 90% Estonian, 71% from the capital; 73% employed full-time, 42% with at least college education; 44% in a steady relationship; 72% gay, 23% bisexual; 23% reported illegal drug use in the last 12 months). One third met criteria for problem drinking and depressive symptoms with one quarter for anxiety symptoms. Suicidality was 44% reported lifetime suicidal thoughts and 11% with at least one suicide attempt. The study instruments, EST-Q and CAGE, only measure symptoms and are not diagnostic tests. A non-random sample which could possibly include persons with easier internet access. Self-reported data and cross-sectional study design are prone to issues with recall bias and temporality. With demonstrated high rates of anxiety, depression, drinking, and drug use among MSM which is consistent with similar studies in Western countries, further research could help determine effective MSM focused interventions to address the broad spectrum of issues among MSM. Copyright © 2015 Elsevier B.V. All rights reserved.
NASA Technical Reports Server (NTRS)
Hong, S. D.; Fedors, R. F.; Schwarzl, F.; Moacanin, J.; Landel, R. F.
1981-01-01
A theoretical analysis of the tensile stress-strain relation of elastomers at constant strain rate is presented which shows that the time and the stress effect are separable if the experimental time scale coincides with a segment of the relaxation modulus that can be described by a single power law. It is also shown that time-strain separability is valid if the strain function is linearly proportional to the Cauchy strain, and that when time-strain separability holds, two strain-dependent quantities can be obtained experimentally. In the case where time and strain effect are not separable, superposition can be achieved only by using temperature and strain-dependent shift factors.
Geobacteraceae strains and methods
Lovley, Derek R.; Nevin, Kelly P.; Yi, Hana
2015-07-07
Embodiments of the present invention provide a method of producing genetically modified strains of electricigenic microbes that are specifically adapted for the production of electrical current in microbial fuel cells, as well as strains produced by such methods and fuel cells using such strains. In preferred embodiments, the present invention provides genetically modified strains of Geobacter sulfurreducens and methods of using such strains.
Manthou, Evanthia; Ciolacu, Luminita; Wagner, Martin; Skandamis, Panagiotis N.
2015-01-01
Multiple Listeria monocytogenes strains can be present in the same food sample; moreover, infection with more than one L. monocytogenes strain can also occur. In this study we investigated the impact of strain competition on the growth and in vitro virulence potential of L. monocytogenes. We identified two strong competitor strains, whose growth was not (or only slightly) influenced by the presence of other strains and two weak competitor strains, which were outcompeted by other strains. Cell contact was essential for growth inhibition. In vitro virulence assays using human intestinal epithelial Caco2 cells showed a correlation between the invasion efficiency and growth inhibition: the strong growth competitor strains showed high invasiveness. Moreover, invasion efficiency of the highly invasive strain was further increased in certain combinations by the presence of a low invasive strain. In all tested combinations, the less invasive strain was outcompeted by the higher invasive strain. Studying the effect of cell contact on in vitro virulence competition revealed a complex pattern in which the observed effects depended only partially on cell-contact suggesting that competition occurs at two different levels: i) during co-cultivation prior to infection, which might influence the expression of virulence factors, and ii) during infection, when bacterial cells compete for the host cell. In conclusion, we show that growth of L. monocytogenes can be inhibited by strains of the same species leading potentially to biased recovery during enrichment procedures. Furthermore, the presence of more than one L. monocytogenes strain in food can lead to increased infection rates due to synergistic effects on the virulence potential. PMID:26529510
NASA Astrophysics Data System (ADS)
Koff, T.; Marzecova, A.; Vandel, E.; Mikomägi, A.; Avi, E.
2015-12-01
Human activities have impacted aquatic systems through the release of contaminants and the regulation of surface and groundwater. Although environmental monitoring has been essential in detecting eutrophication, biodiversity loss or water quality deterioration, monitoring activities are limited in time and are thus not sufficient in their scope to identify causality and thresholds. Paleolimnological studies increasingly show that the response of lakes to climatic and human influences is complex, multidimensional, and often indirectly mediated through watershed processes. In this study we examine the history of eutrophication processes in small lakes in Estonia using the multi-proxy analysis of sediment. Study sites represent lakes with different anthropogenic stressors: urbanisation and recreational use, run-off from an oil shale mine, and fish-kills and liming measures. We have used diverse analytical methods, such as elemental analysis, stable isotopes, fossil pigments, diatoms and Cladocera remains. The information derived from sedimentary indicators broadly agrees with the historical evidence of eutrophication and pollution. Moreover, the sediment records are indispensable for identifying additional issues such as: 1) earlier onset of cultural eutrophication; 2) the significant impact of catchment erosion on the deterioration of lake quality, particularly cyanobacterial blooms; and 3) changes in sedimentation processes with significance for internal biogeochemical cycling of nutrients. Importantly, the integration of several methods has significantly improved interpretation of sedimentary data and elucidated the different strengths of various indicator types. The project findings prove to be highly relevant for both the prediction of the ecological responses of lakes to different anthropogenic impacts and the establishment of reasonable reference target conditions in restoration schemes, as well as for methodological improvements of the sediment analysis.
NASA Astrophysics Data System (ADS)
Choi, Changhoon; Ahn, Joongho; Jeon, Seungwan; Kim, Chulhong
2017-07-01
Vulnerable plaques are the major cause of cardiovascular disease, but they are difficult to detect with conventional intravascular imaging techniques. Techniques are needed to identify plaque vulnerability based on the presence of lipids in plaque. Thermal strain imaging (TSI) is an imaging technique based on ultrasound (US) wave propagation speed, which varies with the medium temperature. In TSI, the strain that occurs during tissue temperature change can be used for lipid detection because it has a different tendency depending on the type of tissue. Here, we demonstrate photothermal strain imaging (pTSI) using an intravascular ultrasound catheter. pTSI is performed by slightly and selectively heating lipid using a relatively inexpensive continuous laser source. We applied a speckle-tracking algorithm to US B-mode images for strain calculations. As a result, the strain produced in porcine fat was different from the strain produced in water-bearing gelatin phantom, which made it possible to distinguish the two. This suggests that pTSI could potentially be a way of differentiating lipids in coronary artery.
High temperature strain measurement with a resistance strain gage
NASA Technical Reports Server (NTRS)
Lei, Jih-Fen; Fichtel, ED; Mcdaniel, Amos
1993-01-01
A PdCr based electrical resistance strain gage was demonstrated in the laboratory to be a viable sensor candidate for static strain measurement at high temperatures. However, difficulties were encountered while transferring the sensor to field applications. This paper is therefore prepared for recognition and resolution of the problems likely to be encountered with PdCr strain gages in field applications. Errors caused by the measurement system, installation technique and lead wire attachment are discussed. The limitations and some considerations related to the temperature compensation technique used for this gage are also addressed.
NASA Astrophysics Data System (ADS)
Shi, Li-Bin; Liu, Xu-Yang; Dong, Hai-Kuan
2016-09-01
We investigate the interface behaviors of Y2O3/GaAs under biaxial strain, triaxial strain, and non-strain conditions. This study is performed by first principles calculations based on density functional theory (DFT). First of all, the biaxial strain is realized by changing the lattice constants in ab plane. Averaged electrostatic potential (AEP) is aligned by establishing Y2O3 and GaAs (110) surfaces. The band offsets of Y2O3/GaAs interface under biaxial strain are investigated by generalized gradient approximation and Heyd-Scuseria-Ernzerhof (HSE) functionals. The interface under biaxial strain is suitable for the design of metal oxide semiconductor (MOS) devices because the valence band offsets (VBO) and conduction band offsets (CBO) are larger than 1 eV. Second, the triaxial strain is applied to Y2O3/GaAs interface by synchronously changing the lattice constants in a, b, and c axis. The band gaps of Y2O3 and GaAs under triaxial strain are investigated by HSE functional. We compare the VBO and CBO under triaxial strain with those under biaxial strain. Third, in the absence of lattice strain, the formation energies, charge state switching levels, and migration barriers of native defects in Y2O3 are assessed. We investigate how they will affect the MOS device performance. It is found that VO+2 and Oi-2 play a very dangerous role in MOS devices. Finally, a direct tunneling leakage current model is established. The model is used to analyze current and voltage characteristics of the metal/Y2O3/GaAs.
Direct measurement of intrinsic critical strain and internal strain in barrier films
NASA Astrophysics Data System (ADS)
Vellinga, W. P.; De Hosson, J. Th. M.; Bouten, P. C. P.
2011-08-01
Resistance measurements during uniaxial tensile deformation of very thin (10 nm) conducting oxide films deposited on 150 nm SiN films on polyethylene naphthalate are discussed. It is first shown that certain characteristics of resistance versus strain curves are representative for the fracture behavior of the SiN film and not for that of the thin conducting oxide film. Subsequently, it is shown that the hysteresis in curves of resistance as a function of strain offers a way to directly measure the intrinsic critical strain of the SiN film without the need to determine internal strains from independent (curvature) measurements that rely on knowledge of moduli and geometry. The method should be applicable, in general, to measure intrinsic critical strain and residual strains of thin brittle films on polymers. Advantages and limitations of the method are discussed.
NASA Technical Reports Server (NTRS)
Kedar, Sharon; Baxter, Sean C.; Parker, Jay W.; Webb, Frank H.; Owen, Susan E.; Sibthorpe, Anthony J.; Dong, Danan
2011-01-01
A geodetic software analysis tool enables the user to analyze 2D crustal strain from geodetic ground motion, and create models of crustal deformation using a graphical interface. Users can use any geodetic measurements of ground motion and derive the 2D crustal strain interactively. This software also provides a forward-modeling tool that calculates a geodetic velocity and strain field for a given fault model, and lets the user compare the modeled strain field with the strain field obtained from the user s data. Users may change parameters on-the-fly and obtain a real-time recalculation of the resulting strain field. Four data products are computed: maximum shear, dilatation, shear angle, and principal components. The current view and data dependencies are processed first. The remaining data products and views are then computed in a round-robin fashion to anticipate view changes. When an analysis or display parameter is changed, the affected data products and views are invalidated and progressively re-displayed as available. This software is designed to facilitate the derivation of the strain fields from the GPS and strain meter data that sample it to facilitate the understanding of the strengths and weaknesses of the strain field derivation from continuous GPS (CGPS) and other geodetic data from a variety of tectonic settings, to converge on the "best practices" strain derivation strategy for the Solid Earth Science ESDR System (SESES) project given the CGPS station distribution in the western U.S., and to provide SESES users with a scientific and educational tool to explore the strain field on their own with user-defined parameters.
Electronic strain-level counter
NASA Technical Reports Server (NTRS)
Pitts, F. L.; Spencer, J. L. (Inventor)
1973-01-01
An electronic strain level counter for obtaining structural strain data on in-flight aircraft is described. The device counts the number of times the strain at a point on an aircraft structural member exceeds each of several preset levels. A dead band is provided at each level to prohibit the counting of small strain variations around a given preset level.
Strain measurement based battery testing
Xu, Jeff Qiang; Steiber, Joe; Wall, Craig M.; Smith, Robert; Ng, Cheuk
2017-05-23
A method and system for strain-based estimation of the state of health of a battery, from an initial state to an aged state, is provided. A strain gauge is applied to the battery. A first strain measurement is performed on the battery, using the strain gauge, at a selected charge capacity of the battery and at the initial state of the battery. A second strain measurement is performed on the battery, using the strain gauge, at the selected charge capacity of the battery and at the aged state of the battery. The capacity degradation of the battery is estimated as the difference between the first and second strain measurements divided by the first strain measurement.
Elevated temperature strain gages
NASA Technical Reports Server (NTRS)
Brittain, J. O.; Geslin, D.; Lei, J. F.
1985-01-01
Materials were evaluated that could be used in manufacturing electrical resistance strain gages for static strain measurements at temperatures at or above 1273 K. Strain gage materials must have a characteristic response to strain, temperature and time that is reproducible or that varies in a predictable manner within specified limits. Several metallic alloys were evaluated, as well as a series of transition metal carbides, nitrides and silicides.
Fernández Ramírez, Mónica D; Kostopoulos, Ioannis; Smid, Eddy J; Nierop Groot, Masja N; Abee, Tjakko
2017-03-06
Biofilms of Lactobacillus plantarum are a potential source for contamination and recontamination of food products. Although biofilms have been mostly studied using single species or even single strains, it is conceivable that in a range of environmental settings including food processing areas, biofilms are composed of multiple species with each species represented by multiple strains. In this study six spoilage related L. plantarum strains FBR1-FBR6 and the model strain L. plantarum WCFS1 were characterised in single, dual and multiple strain competition models. A quantitative PCR approach was used with added propidium monoazide (PMA) enabling quantification of intact cells in the biofilm, representing the viable cell fraction that determines the food spoilage risk. Our results show that the performance of individual strains in multi-strain cultures generally correlates with their performance in pure culture, and relative strain abundance in multi-strain biofilms positively correlated with the relative strain abundance in suspended (planktonic) cultures. Performance of individual strains in dual-strain biofilms was highly influenced by the presence of the secondary strain, and in most cases no correlation between the relative contributions of viable planktonic cells and viable cells in the biofilm was noted. The total biofilm quantified by CV staining of the dual and multi-strain biofilms formed was mainly correlated to CV values of the dominant strain obtained in single strain studies. However, the combination of strain FBR5 and strain WCFS1 showed significantly higher CV values compared to the individual performances of both strains indicating that total biofilm formation was higher in this specific condition. Notably, L. plantarum FBR5 was able to outgrow all other strains and showed the highest relative abundance in dual and multi-strain biofilms. All the dual and multi-strain biofilms contained a considerable number of viable cells, representing a potential
Strain expansion-reduction approach
NASA Astrophysics Data System (ADS)
Baqersad, Javad; Bharadwaj, Kedar
2018-02-01
Validating numerical models are one of the main aspects of engineering design. However, correlating million degrees of freedom of numerical models to the few degrees of freedom of test models is challenging. Reduction/expansion approaches have been traditionally used to match these degrees of freedom. However, the conventional reduction/expansion approaches are only limited to displacement, velocity or acceleration data. While in many cases only strain data are accessible (e.g. when a structure is monitored using strain-gages), the conventional approaches are not capable of expanding strain data. To bridge this gap, the current paper outlines a reduction/expansion technique to reduce/expand strain data. In the proposed approach, strain mode shapes of a structure are extracted using the finite element method or the digital image correlation technique. The strain mode shapes are used to generate a transformation matrix that can expand the limited set of measurement data. The proposed approach can be used to correlate experimental and analytical strain data. Furthermore, the proposed technique can be used to expand real-time operating data for structural health monitoring (SHM). In order to verify the accuracy of the approach, the proposed technique was used to expand the limited set of real-time operating data in a numerical model of a cantilever beam subjected to various types of excitations. The proposed technique was also applied to expand real-time operating data measured using a few strain gages mounted to an aluminum beam. It was shown that the proposed approach can effectively expand the strain data at limited locations to accurately predict the strain at locations where no sensors were placed.
Sb-induced strain fluctuations in a strained layer superlattice of InAs/InAsSb
NASA Astrophysics Data System (ADS)
Kim, Honggyu; Meng, Yifei; Klem, John F.; Hawkins, Samuel D.; Kim, Jin K.; Zuo, Jian-Min
2018-04-01
We show that Sb substitution for As in a MBE grown InAs/InAsSb strained layer superlattice (SLS) is accompanied by significant strain fluctuations. The SLS was observed using scanning transmission electron microscopy along the [100] zone axis where the cation and anion atomic columns are separately resolved. Strain analysis based on atomic column positions reveals asymmetrical transitions in the strain profile across the SLS interfaces. The averaged strain profile is quantitatively fitted to the segregation model, which yields a distribution of Sb in agreement with the scanning tunneling microscopy result. The subtraction of the calculated strain reveals an increase in strain fluctuations with the Sb concentration, as well as isolated regions with large strain deviations extending spatially over ˜1 nm, which suggest the presence of point defects.
Pulled hamstring muscle; Sprain - hamstring ... There are 3 levels of hamstring strains: Grade 1 -- mild muscle strain or pull Grade 2 -- partial muscle tear Grade 3 -- complete muscle tear Recovery time depends ...
NASA Technical Reports Server (NTRS)
1995-01-01
HITEC Corporation developed a strain gage application for DanteII, a mobile robot developed for NASA. The gage measured bending forces on the robot's legs and warned human controllers when acceptable forces were exceeded. HITEC further developed the technology for strain gage services in creating transducers out of "Indy" racing car suspension pushrods, NASCAR suspension components and components used in motion control.
Occlusal traits and orthodontic treatment need in 7‐ to 10‐year‐olds in Estonia
Saag, Mare; Svedström‐Oristo, Anna‐Liisa; Peltomäki, Timo; Vinkka‐Puhakka, Heli
2017-01-01
Abstract The aim of this study was to evaluate the distribution of occlusal traits and orthodontic treatment need and complexity in Estonian 7‐ to 10‐year‐old children. This data provides solid information for planning of orthodontic care. Data of 392 Estonian children (198 girls and 194 boys, mean age 9.0 years, range 7.1–10.4 years) was analysed in this cross‐sectional study. Assessed traits included first molar and canine sagittal relationship, overjet, overbite, crowding, midline diastema, crossbite, and scissor bite. Orthodontic treatment need and complexity were assessed using the Index of Complexity, Outcome, and Need. Parents' opinion regarding their child's teeth was determined using a questionnaire. The most prevalent occlusal traits were canine class I sagittal relationship (73.7%), midline diastema (73.0%), molar class I sagittal relationship (57.4%), and overbite ≥3.5 mm (51.8%). According to the Index of Complexity, Outcome, and Need, 64.3% of Estonian elementary school children were in need of orthodontic treatment. Treatment complexity was simple in 12.5%, mild in 38.8%, moderate in 22.7%, difficult in 14.0%, and very difficult in 12.0% of the children. Approximately 66.4% of the parents felt that their child needed orthodontic treatment. This study confirms earlier findings indicating that the most frequent sagittal relationship is class I in the first molars and class I in the canines. However, the sagittal relationship was asymmetric in more than half of the children. Correlation between objectively defined treatment need and parents' desire for treatment was high in Estonia. PMID:29744185
Murai, Daisuke; Yamada, Satoshi; Hayashi, Taichi; Okada, Kazunori; Nishino, Hisao; Nakabachi, Masahiro; Yokoyama, Shinobu; Abe, Ayumu; Ichikawa, Ayako; Ono, Kota; Kaga, Sanae; Iwano, Hiroyuki; Mikami, Taisei; Tsutsui, Hiroyuki
2017-05-01
Whether and how left ventricular (LV) strain and strain rate correlate with wall stress is not known. Furthermore, it is not determined whether strain or strain rate is less dependent on the afterload. In 41 healthy young adults, LV global peak strain and systolic peak strain rate in the longitudinal direction (LS and LSR, respectively) and circumferential direction (CS and CSR, respectively) were measured layer-specifically using speckle tracking echocardiography (STE) before and during a handgrip exercise. Among all the points before and during the exercise, all the STE parameters significantly correlated linearly with wall stress (LS: r = -0.53, p < 0.01, LSR: r = -0.28, p < 0.05, CS in the inner layer: r = -0.72, p < 0.01, CSR in the inner layer: r = -0.47, p < 0.01). Strain more strongly correlated with wall stress than strain rate (r = -0.53 for LS vs. r = -0.28 for LSR, p < 0.05; r = -0.72 for CS vs. r = -0.47 for CSR in the inner layer, p < 0.05), whereas the interobserver variability was similar between strain and strain rate (longitudinal 6.2 vs. 5.2 %, inner circumferential 4.8 vs. 4.7 %, mid-circumferential 7.9 vs. 6.9 %, outer circumferential 10.4 vs. 9.7 %), indicating that the differences in correlation coefficients reflect those in afterload dependency. It was thus concluded that LV strain and strain rate linearly and inversely correlated with wall stress in the longitudinal and circumferential directions, and strain more strongly depended on afterload than did strain rate. Myocardial shortening should be evaluated based on the relationships between these parameters and wall stress.
Lilles, Stella; Talvik, Inga; Noormets, Klari; Vaher, Ulvi; Õunap, Katrin; Reimand, Tiia; Sander, Valentin; Ilves, Pilvi; Talvik, Tiina
2016-12-01
Cyclin-dependent kinase-like 5 ( CDKL5 ) gene mutations have mainly been found in females with early infantile epileptic encephalopathy (EIEE), severe intellectual disability, and Rett-like features. To date, only 22 boys have been reported, presenting with far more severe phenotypic features. We report the first cases of CDKL5 gene-related EIEE in Estonia diagnosed using panels of epilepsy-associated genes and describe the phenotype-genotype correlations in three male and one female patient. One of the mutations, identified in a male patient, was a novel de novo hemizygous frameshift mutation (NM_003159.2:c.2225_2228del (p.Glu742Afs*41)) in exon 15 of CDKL5. All boys have a more severe phenotype than the female patient. In boys with early onset of seizures and poor development with absent or poor eye contact, CDKL5 gene-related EIEE can be suspected and epilepsy-associated genes should be analyzed for early etiological diagnosis. Early genetic diagnosis would be the cornerstone in personalized treatment in the future. Georg Thieme Verlag KG Stuttgart · New York.
Sb-induced strain fluctuations in a strained layer superlattice of InAs/InAsSb
Kim, Honggyu; Meng, Yifei; Klem, John F.; ...
2018-04-28
Here, we show that Sb substitution for As in a MBE grown InAs/InAsSb strained layer superlattice (SLS) is accompanied by significant strain fluctuations. The SLS was observed using scanning transmission electron microscopy along the [100] zone axis where the cation and anion atomic columns are separately resolved. Strain analysis based on atomic column positions reveals asymmetrical transitions in the strain profile across the SLS interfaces. The averaged strain profile is quantitatively fitted to the segregation model, which yields a distribution of Sb in agreement with our scanning tunneling microscopy result. The subtraction of the calculated strain reveals an increase inmore » strain fluctuations with the Sb concentration, as well as isolated regions with large strain deviations extending spatially over ~1 nm, which suggest the presence of point defects.« less
Sb-induced strain fluctuations in a strained layer superlattice of InAs/InAsSb
DOE Office of Scientific and Technical Information (OSTI.GOV)
Kim, Honggyu; Meng, Yifei; Klem, John F.
Here, we show that Sb substitution for As in a MBE grown InAs/InAsSb strained layer superlattice (SLS) is accompanied by significant strain fluctuations. The SLS was observed using scanning transmission electron microscopy along the [100] zone axis where the cation and anion atomic columns are separately resolved. Strain analysis based on atomic column positions reveals asymmetrical transitions in the strain profile across the SLS interfaces. The averaged strain profile is quantitatively fitted to the segregation model, which yields a distribution of Sb in agreement with our scanning tunneling microscopy result. The subtraction of the calculated strain reveals an increase inmore » strain fluctuations with the Sb concentration, as well as isolated regions with large strain deviations extending spatially over ~1 nm, which suggest the presence of point defects.« less
A new radial strain and strain rate estimation method using autocorrelation for carotid artery
NASA Astrophysics Data System (ADS)
Ye, Jihui; Kim, Hoonmin; Park, Jongho; Yeo, Sunmi; Shim, Hwan; Lim, Hyungjoon; Yoo, Yangmo
2014-03-01
Atherosclerosis is a leading cause of cardiovascular disease. The early diagnosis of atherosclerosis is of clinical interest since it can prevent any adverse effects of atherosclerotic vascular diseases. In this paper, a new carotid artery radial strain estimation method based on autocorrelation is presented. In the proposed method, the strain is first estimated by the autocorrelation of two complex signals from the consecutive frames. Then, the angular phase from autocorrelation is converted to strain and strain rate and they are analyzed over time. In addition, a 2D strain image over region of interest in a carotid artery can be displayed. To evaluate the feasibility of the proposed radial strain estimation method, radiofrequency (RF) data of 408 frames in the carotid artery of a volunteer were acquired by a commercial ultrasound system equipped with a research package (V10, Samsung Medison, Korea) by using a L5-13IS linear array transducer. From in vivo carotid artery data, the mean strain estimate was -0.1372 while its minimum and maximum values were -2.961 and 0.909, respectively. Moreover, the overall strain estimates are highly correlated with the reconstructed M-mode trace. Similar results were obtained from the estimation of the strain rate change over time. These results indicate that the proposed carotid artery radial strain estimation method is useful for assessing the arterial wall's stiffness noninvasively without increasing the computational complexity.
NASA Astrophysics Data System (ADS)
Bradshaw, P.
Computational techniques for accounting for extra strain rates, abnormal distributions of delta-U/delta-y, fluctuating strain rates, and the effects of body forces in modeling shear flows are discussed. Consideration is given to simple shears where the extra strain rate does not affect turbulence, thin shear layers, moderately thin shear layers, and strongly distorted flows. Attention is given to formulations based on the exact transport equations for Reynolds stress as derived from the time-averaged Navier-Stokes equations. Extra strain rates arise from curvature, lateral divergence, and bulk compression, with Coriolis forces accounting for the first, intensification of the spanwise vorticity for the second, and compression or dilation of the shear layer producing the third. The curvature forces, e.g., buoyancy and Coriolis forces, are responsible for hurricanes and tornadoes.
NASA Technical Reports Server (NTRS)
Rand, J. L. (Inventor)
1984-01-01
A strain transducer system and process for making the same is disclosed. A beryllium copper ring having four strain gages is electrically connected in Wheatstone bridge fashion to the output instrumentation. Tabs are bonded to a balloon or like surface with strain on the surface causing bending of a ring which provides an electrical signal through the gages proportional to the surface strain. A photographic pattern of a one half ring segment as placed on a sheet of beryllium copper for chem-mill etch formation is illustrated.
Elevated temperature strain gages
NASA Technical Reports Server (NTRS)
Brittain, J. O.; Geslin, D.; Lei, J. F.
1986-01-01
One of the goals of the HOST Program is the development of electrical resistance strain gages for static strain measurements at temperatures equal to or greater than 1273 K. Strain gage materials must have a reproducible or predictable response to temperature, time and strain. It is the objective of this research to investigate criteria for the selection of materials for such applications through electrical properties studies. The results of the investigation of two groups of materials, refractory compounds and binary alloy solid solutions are presented.
Chmielak, Bartos; Matheisen, Christopher; Ripperda, Christian; Bolten, Jens; Wahlbrink, Thorsten; Waldow, Michael; Kurz, Heinrich
2013-10-21
We present detailed investigations of the local strain distribution and the induced second-order optical nonlinearity within strained silicon waveguides cladded with a Si₃N₄ strain layer. Micro-Raman Spectroscopy mappings and electro-optic characterization of waveguides with varying width w(WG) show that strain gradients in the waveguide core and the effective second-order susceptibility χ(2)(yyz) increase with reduced w(WG). For 300 nm wide waveguides a mean effective χ(2)(yyz) of 190 pm/V is achieved, which is the highest value reported for silicon so far. To gain more insight into the origin of the extraordinary large optical second-order nonlinearity of strained silicon waveguides numerical simulations of edge induced strain gradients in these structures are presented and discussed.
NASA Astrophysics Data System (ADS)
Cox, Brian N.; Landis, Chad M.
2018-02-01
We present a simple theory of a strain pulse propagating as a solitary wave through a continuous two-dimensional population of cells. A critical strain is assumed to trigger a strain transformation, while, simultaneously, cells move as automata to tend to restore a preferred cell density. We consider systems in which the strain transformation is a shape change, a burst of proliferation, or the commencement of growth (which changes the shape of the population sheet), and demonstrate isomorphism among these cases. Numerical and analytical solutions describe a strain pulse whose height does not depend on how the strain disturbance was first launched, or the rate at which the strain transformation is achieved, or the rate constant in the rule for the restorative cell motion. The strain pulse is therefore very stable, surviving the imposition of strong perturbations: it would serve well as a timing signal in development. The automatous wave formulation is simple, with few model parameters. A strong case exists for the presence of a strain pulse during amelogenesis. Quantitative analysis reveals a simple relationship between the velocity of the leading edge of the pulse in amelogenesis and the known speed of migration of ameloblast cells. This result and energy arguments support the depiction of wave motion as an automatous cell response to strain, rather than as a response to an elastic energy gradient. The theory may also contribute to understanding the determination front in somitogenesis, moving fronts of convergent-extension transformation, and mitotic wavefronts in the syncytial drosophila embryo.
Mvubu, Nontobeko Eunice; Pillay, Balakrishna; Gamieldien, Junaid; Bishai, William; Pillay, Manormoney
2016-12-01
Although pulmonary epithelial cells are integral to innate and adaptive immune responses during Mycobacterium tuberculosis infection, global transcriptomic changes in these cells remain largely unknown. Changes in gene expression induced in pulmonary epithelial cells infected with M. tuberculosis F15/LAM4/KZN, F11, F28, Beijing and Unique genotypes were investigated by RNA sequencing (RNA-Seq). The Illumina HiSeq 2000 platform generated 50 bp reads that were mapped to the human genome (Hg19) using Tophat (2.0.10). Differential gene expression induced by the different strains in infected relative to the uninfected cells was quantified and compared using Cufflinks (2.1.0) and MeV (4.0.9), respectively. Gene expression varied among the strains with the total number of genes as follows: F15/LAM4/KZN (1187), Beijing (1252), F11 (1639), F28 (870), Unique (886) and H37Rv (1179). A subset of 292 genes was commonly induced by all strains, where 52 genes were down-regulated while 240 genes were up-regulated. Differentially expressed genes were compared among the strains and the number of induced strain-specific gene signatures were as follows: F15/LAM4/KZN (138), Beijing (52), F11 (255), F28 (55), Unique (186) and H37Rv (125). Strain-specific molecular gene signatures associated with functional pathways were observed only for the Unique and H37Rv strains while certain biological functions may be associated with other strain signatures. This study demonstrated that strains of M. tuberculosis induce differential gene expression and strain-specific molecular signatures in pulmonary epithelial cells. Specific signatures induced by clinical strains of M. tuberculosis can be further explored for novel host-associated biomarkers and adjunctive immunotherapies. Copyright © 2016 Elsevier Ltd. All rights reserved.
Kuznetsova, Tatjana; Tilk, Mari; Pärn, Henn; Lukjanova, Aljona; Mandre, Malle
2011-12-01
The investigation was carried out in 8-year-old Scots pine (Pinus sylvestris L.) and lodgepole pine (Pinus contorta var. latifolia Engelm.) plantations on post-mining area, Northeast Estonia. The aim of the study was to assess the suitability of lodgepole pine for restoration of degraded lands by comparing the growth, biomass, and nutrient concentration of studied species. The height growth of trees was greater in the Scots pine stand, but the tree aboveground biomass was slightly larger in the lodgepole pine stand. The aboveground biomass allocation to the compartments did not differ significantly between species. The vertical distribution of compartments showed that 43.2% of the Scots pine needles were located in the middle layer of the crown, while 58.5% of the lodgepole pine needles were in the lowest layer of the crown. The largest share of the shoots and stem of both species was allocated to the lowest layer of the crown. For both species, the highest NPK concentrations were found in the needles and the lowest in the stems. On the basis of the present study results, it can be concluded that the early growth of Scots pine and lodgepole pine on oil shale post-mining landscapes is similar.
NASA Astrophysics Data System (ADS)
Marandi, Andres; Karro, Enn; Polikarpus, Maile; Jõeleht, Argo; Kohv, Marko; Hang, Tiit; Hiiemaa, Helen
2013-11-01
The water balance of wetlands plays an integral role in their function. Developments adjacent to wetlands can affect their water balance through impacts on groundwater flow and increased discharge in the area, and they can cause lowering of the wetland water table. A 430 km2 area was selected for groundwater modelling to asses the effect of underground mining on the water balance of wetlands in north-eastern Estonia. A nature conservation area (encompassing Selisoo bog) is within 3 km of an underground oil-shale mine. Two future mining scenarios with different areal extents of mining were modeled and compared to the present situation. Results show that the vertical hydraulic conductivity of the subsurface is of critical importance to potential wetland dewatering as a result of mining. Significant impact on the Selisoo bog water balance will be caused by the approaching mine but there will be only minor additional impacts from mining directly below the bog. The major impact will arise before that stage, when the underground mine extension reaches the border of the nature conservation area; since the restriction of activities in this area relates to the ground surface, the conservation area’s border is not sufficiently protective in relation to underground development.
Chen, Meng; Zhang, Tie-gang; Chen, Li-juan; Wu, Jiang; Yang, Jie; Zhang, Wei
2009-11-01
To compare the genetic characteristics of mumps virus strain circulating in Beijing with vaccine strain and to preliminarily analysis the reasons of vaccine ineffectiveness. The following methods were used: Isolation and identification of the mumps virus which had been circulating in Beijing, immunization history analysis, SH gene sequence analysis and comparison genotype homology with reference strains and analysis of the key amino acid sites of HN variation. In 38 mumps cases that virus had been isolated from, another seven cases were IgM negative. In 2007 and 2008, the positive rates on virus isolation, RT-PCR and IgM-decreased significantly, while the cases with immunization history had an increase. Cases without histories of vaccination had both higher positive rates on virus isolation and IgM. Thirty-eight strains belonged to F genotype virus, but vaccine strain was A genotype. The circulating viruses showed 5.6% sequence divergence on SH gene nucleotide and 16.0% - 18.1% from vaccine strain. Conservative hydrophobic amino acids on SH protein of some Beijing strains had changed. For example, there were 6 strains, from No.8: L-->F. The circulating viruses showed 2.3% sequence divergence on HN protein amino acid sequences and 4.2% - 5.3% from vaccine strain. Amino acids sites, which deciding the ability of cross-neutralization of the Beijing strains and vaccine strains were different. At the 354 and 356 sites, all the Beijing strains were different from the vaccine strains. The N-glycosylation sites on HN of Beijing strains were also different from those on vaccine strains. Locations 464 - 466 appeared to be NCS on Beijing strain, but locations 464 - 466 were NCR on the vaccine strains. Another 18 unknown function amino acids sites of all Beijing strains were different from those on vaccine strains. In recent years, genotype F became the main genotype of circulating strains in Beijing without genotype variation, but larger difference was found between them
Flexible piezotronic strain sensor.
Zhou, Jun; Gu, Yudong; Fei, Peng; Mai, Wenjie; Gao, Yifan; Yang, Rusen; Bao, Gang; Wang, Zhong Lin
2008-09-01
Strain sensors based on individual ZnO piezoelectric fine-wires (PFWs; nanowires, microwires) have been fabricated by a simple, reliable, and cost-effective technique. The electromechanical sensor device consists of a single electrically connected PFW that is placed on the outer surface of a flexible polystyrene (PS) substrate and bonded at its two ends. The entire device is fully packaged by a polydimethylsiloxane (PDMS) thin layer. The PFW has Schottky contacts at its two ends but with distinctly different barrier heights. The I- V characteristic is highly sensitive to strain mainly due to the change in Schottky barrier height (SBH), which scales linear with strain. The change in SBH is suggested owing to the strain induced band structure change and piezoelectric effect. The experimental data can be well-described by the thermionic emission-diffusion model. A gauge factor of as high as 1250 has been demonstrated, which is 25% higher than the best gauge factor demonstrated for carbon nanotubes. The strain sensor developed here has applications in strain and stress measurements in cell biology, biomedical sciences, MEMS devices, structure monitoring, and more.
Noutsios, Georgios T; Papi, Rigini M; Ekateriniadou, Loukia V; Minas, Anastasios; Kyriakidis, Dimitrios A
2012-03-01
In the present study forty-four Greek endemic strains of Br. melitensis and three reference strains were genotyped by Multi locus Variable Number Tandem Repeat (ML-VNTR) analysis based on an eight-base pair tandem repeat sequence that was revealed in eight loci of Br. melitensis genome. The forty-four strains were discriminated from the vaccine strain Rev-1 by Restriction Fragment Length Polymorphism (RFLP) and Denaturant Gradient Gel Electrophoresis (DGGE). The ML-VNTR analysis revealed that endemic, reference and vaccine strains are genetically closely related, while most of the loci tested (1, 2, 4, 5 and 7) are highly polymorphic with Hunter-Gaston Genetic Diversity Index (HGDI) values in the range of 0.939 to 0.775. Analysis of ML-VNTRs loci stability through in vitro passages proved that loci 1 and 5 are non stable. Therefore, vaccine strain can be discriminated from endemic strains by allele's clusters of loci 2, 4, 6 and 7. RFLP and DGGE were also employed to analyse omp2 gene and reveled different patterns among Rev-1 and endemic strains. In RFLP, Rev-1 revealed three fragments (282, 238 and 44 bp), while endemic strains two fragments (238 and 44 bp). As for DGGE, the electrophoretic mobility of Rev-1 is different from the endemic strains due to heterologous binding of DNA chains of omp2a and omp2b gene. Overall, our data show clearly that it is feasible to genotype endemic strains of Br. melitensis and differentiate them from vaccine strain Rev-1 with ML-VNTR, RFLP and DGGE techniques. These tools can be used for conventional investigations in brucellosis outbreaks.
Quantitative Residual Strain Analyses on Strain Hardened Nickel Based Alloy
NASA Astrophysics Data System (ADS)
Yonezawa, Toshio; Maeguchi, Takaharu; Goto, Toru; Juan, Hou
Many papers have reported about the effects of strain hardening by cold rolling, grinding, welding, etc. on stress corrosion cracking susceptibility of nickel based alloys and austenitic stainless steels for LWR pipings and components. But, the residual strain value due to cold rolling, grinding, welding, etc. is not so quantitatively evaluated.
The influence of strain rate and hydrogen on the plane-strain ductility of Zircaloy cladding
DOE Office of Scientific and Technical Information (OSTI.GOV)
Link, T.M.; Motta, A.T.; Koss, D.A.
1998-03-01
The authors studied the ductility of unirradiated Zircaloy-4 cladding under loading conditions prototypical of those found in reactivity-initiated accidents (RIA), i.e.: near plane-strain deformation in the hoop direction (transverse to the cladding axis) at room temperature and 300 C and high strain rates. To conduct these studies, they developed a specimen configuration in which near plane-strain deformation is achieved in the gage section, and a testing methodology that allows one to determine both the limit strain at the onset of localized necking and the fracture strain. The experiments indicate that there is little effect of strain rate (10{sup {minus}3} tomore » 10{sup 2} s{sup {minus}1}) on the ductility of unhydrided Zircaloy tubing deformed under near plane-strain conditions at either room temperature or 300 C. Preliminary experiments on cladding containing 190 ppm hydrogen show only a small loss of fracture strain but no clear effect on limit strain. The experiments also indicate that there is a significant loss of Zircaloy ductility when surface flaws are present in the form of thickness imperfections.« less
Zheng, H; Peret, T C; Randolph, V B; Crowley, J C; Anderson, L J
1996-01-01
Candidate live-virus vaccines for respiratory syncytial virus are being developed and are beginning to be evaluated in clinical trials. To distinguish candidate vaccine strains from wild-type strains isolated during these trials, we developed PCR assays specific to two sets of candidate vaccine strains. The two sets were a group A strain (3A), its three attenuated, temperature-sensitive variant strains, a group B strain (2B), and its four attenuated, temperature-sensitive variant strains. The PCR assays were evaluated by testing 18 group A wild-type strains, the 3A strains, 9 group B wild-type strains, and the 2B strains. PCR specific to group A wild-type strains amplified only group A wild-type strains, and 3A-specific PCR amplified only 3A strains. PCR specific to group B wild-type strains amplified all group A and group B strains but gave a 688-bp product for group B wild-type strains, a 279-bp product for 2B strains, a 547-bp product for all group A strains, and an additional 688-bp product for some group A strains, including 3A strains. These types of PCR assays can, in conjunction with other methods, be used to efficiently distinguish candidate vaccine strains from other respiratory syncytial virus strains. PMID:8789010
Shokryazdan, Parisa; Sieo, Chin Chin; Kalavathy, Ramasamy; Liang, Juan Boo; Alitheen, Noorjahan Banu; Faseleh Jahromi, Mohammad; Ho, Yin Wan
2014-01-01
The objective of this study was to isolate, identify, and characterize some lactic acid bacterial strains from human milk, infant feces, and fermented grapes and dates, as potential probiotics with antimicrobial activity against some human pathogenic strains. One hundred and forty bacterial strains were isolated and, after initial identification and a preliminary screening for acid and bile tolerance, nine of the best isolates were selected and further identified using 16 S rRNA gene sequences. The nine selected isolates were then characterized in vitro for their probiotic characteristics and their antimicrobial activities against some human pathogens. Results showed that all nine isolates belonged to the genus Lactobacillus. They were able to tolerate pH 3 for 3 h, 0.3% bile salts for 4 h, and 1.9 mg/mL pancreatic enzymes for 3 h. They exhibited good ability to attach to intestinal epithelial cells and were not resistant to the tested antibiotics. They also showed good antimicrobial activities against the tested pathogenic strains of humans, and most of them exhibited stronger antimicrobial activity than the reference strain L. casei Shirota. Thus, the nine Lactobacillus strains could be considered as potential antimicrobial probiotic strains against human pathogens and should be further studied for their human health benefits. PMID:25105147
Showalter, Brent L.; DeLucca, John F.; Peloquin, John M.; Cortes, Daniel H.; Yoder, Jonathon H.; Jacobs, Nathan T.; Wright, Alexander C.; Gee, James C.; Vresilovic, Edward J.; Elliott, Dawn M.
2017-01-01
Tissue strain is an important indicator of mechanical function, but is difficult to noninvasively measure in the intervertebral disc. The objective of this study was to generate a disc strain template, a 3D average of disc strain, of a group of human L4–L5 discs loaded in axial compression. To do so, magnetic resonance images of uncompressed discs were used to create an average disc shape. Next, the strain tensors were calculated pixel-wise by using a previously developed registration algorithm. Individual disc strain tensor components were then transformed to the template space and averaged to create the disc strain template. The strain template reduced individual variability while highlighting group trends. For example, higher axial and circumferential strains were present in the lateral and posterolateral regions of the disc, which may lead to annular tears. This quantification of group-level trends in local 3D strain is a significant step forward in the study of disc biomechanics. These trends were compared to a finite element model that had been previously validated against the disc-level mechanical response. Depending on the strain component, 81–99% of the regions within the finite element model had calculated strains within one standard deviation of the template strain results. The template creation technique provides a new measurement technique useful for a wide range of studies, including more complex loading conditions, the effect of disc pathologies and degeneration, damage mechanisms, and design and evaluation of treatments. PMID:26694516
Rintamäki, Hannu; Rissanen, Sirkka
2006-07-01
In spite of increased environmental cold stress, heat strain is possible also in a cold environment. The body heat balance depends on three factors: environmental thermal conditions, metabolic heat production and thermal insulation of clothing and other protective garments. As physical exercise may increase metabolic heat production from rest values by ten times or even more, the required thermal insulation of clothing may vary accordingly. However, in most outdoor work, and often in indoor cold work, too, the thermal insulation of clothing is impractical, difficult or impossible to adjust according to the changes in physical activity. This is especially true with whole body covering garments like chemical protective clothing. As a result of this imbalance, heat strain may develop. In cold all the signs of heat strain (core temperature above 38 degrees C, warm or hot thermal sensations, increased cutaneous circulation and sweating) may not be present at the same time. Heat strain in cold may be whole body heat strain or related only to torso or core temperature. Together with heat strain in torso or body core, there can be at the same time even cold strain in peripheral parts and/or superficial layers of the body. In cold environment both the preservation of insulation and facilitation of heat loss are important. Development of clothing design is still needed to allow easy adjustments of thermal insulation.
Lemsalu, Liis; Rüütel, Kristi; Laisaar, Kaja-Triin; Lõhmus, Liilia; Raidvee, Aire; Uusküla, Anneli
2017-06-01
People living with HIV (PLHIV) have higher rates of suicidal behavior than the general population. This study assessed suicidal behavior (ideation and/or attempts, ever and in the past 12 months) among PLHIV receiving outpatient HIV medical care in Estonia and associations between suicidal behavior and psychological treatment. The cross-sectional study collected data from January to November 2013 using a self-report questionnaire. Eight hundred PLHIV participated, 39 % (n = 306) of whom had been suicidal. Lifetime prevalence was 36 % for suicidal ideation and 20 % for attempts. Younger age, incarceration, having ever abused alcohol and also injected drugs, having lived with HIV for more than 10 years, and being depressed were associated with lifetime suicidal behavior. Suicidal behavior within the past 12 months was reported by 20 % (n = 156) of respondents. Of these, 27 % received psychological treatment (counseling and/or psychotherapy), 20 % had taken antidepressants, and 49 % sedatives. Individuals perceiving a need for treatment were significantly more likely to receive psychological treatment when experiencing suicidal behavior (OR 25.65, 95 % CI 2.92-225.47). In conclusion, suicidal behavior is frequent among PLHIV but psychological treatment is not often received. One of the barriers to treatment is patients' lack of perceived need for help.
Rubin, Clinton T.; Seeherman, Howard; Qin, Yi-Xian; Gross, Ted S.
2013-01-01
Distributions of normal strain, shear strain, and strain energy density (SED) were determined across the midshaft of the third metacarpal (MCIII, or cannon bone) of 3 adult thoroughbred horses as a function of speed and gait. A complete characterization of the mechanical demands of the bone made through the stride and from mild through the extremes of locomotion was possible by using three 3-element rosette strain gauges bonded at the diaphyseal midshaft of the MCIII and evaluating the strain output with beam theory and finite element analysis. Mean ± sd values of normal strain, shear strain, and SED increased with speed and peaked during a canter (−3560±380 microstrain, 1760±470 microstrain, and 119±23 kPa, respectively). While the location of these peaks was similar across animals and gaits, the resulting strain distributions across the cortex were consistently nonuniform, establishing between a 73-fold (slow trot) to a 330-fold (canter) disparity between the sites of maximum and minimum SED for each gait cycle. Using strain power density as an estimate of strain history across the bone revealed a 154-fold disparity between peak and minimum at the walk but fell to ∼32-fold at the canter. The nonuniform, minimally varying, strain environment suggests either that bone homeostasis is mediated by magnitude-independent mechanical signals or that the duration of stimuli necessary to establish and maintain tissue integrity is relatively brief, and thus the vast majority of strain information is disregarded.—Rubin, C. T., Seeherman, H., Qin, Y.-X., Gross, T. S., The mechanical consequences of load bearing in the equine third metacarpal across speed and gait: the nonuniform distributions of normal strain, shear strain, and strain energy density. PMID:23355269
Strain Pattern in Supercooled Liquids
NASA Astrophysics Data System (ADS)
Illing, Bernd; Fritschi, Sebastian; Hajnal, David; Klix, Christian; Keim, Peter; Fuchs, Matthias
2016-11-01
Investigations of strain correlations at the glass transition reveal unexpected phenomena. The shear strain fluctuations show an Eshelby-strain pattern [˜cos (4 θ ) /r2 ], characteristic of elastic response, even in liquids, at long times. We address this using a mode-coupling theory for the strain fluctuations in supercooled liquids and data from both video microscopy of a two-dimensional colloidal glass former and simulations of Brownian hard disks. We show that the long-ranged and long-lived strain signatures follow a scaling law valid close to the glass transition. For large enough viscosities, the Eshelby-strain pattern is visible even on time scales longer than the structural relaxation time τ and after the shear modulus has relaxed to zero.
Mourad, D; van der Perk, M
2004-01-01
First results are presented of a large-scale GIS-based nutrient transport modelling for the 1985-1999 period in the Estonian part of the transboundary drainage basin of Lake Peipsi (Estonian)/Chudskoe (Russian), one of the largest lakes in Europe, shared by Russia and Estonia. Although the lake is relatively undisturbed by human pollution, it is vulnerable for eutrophication by increased river loads, as shown in the past, when the north-eastern part of the former Soviet Union suffered from intensive agriculture. The collapse of the Soviet Union caused a dramatic decline in fertilizer application rates and widespread abandonment of agricultural land. Although concentration measurements and modelling results indicate a general decrease in nutrient loads, modelling is complicated by the transfer of nutrients from diffuse emissions, which is strongly governed by retention and assumed periodic release from storages within the river basin, like the root zone, tile drains, ditches, channels, bed sediments, floodplains and lakes. Modelling diffuse emission contribution to river loads can be improved by better knowledge about the spatial and temporal distribution of this retention and release within the drainage basin.
Mvubu, Nontobeko E; Pillay, Balakrishna; McKinnon, Lyle R; Pillay, Manormoney
2018-04-01
M. tuberculosis F15/LAM4/KZN has been associated with high transmission rates of drug resistant tuberculosis in the KwaZulu-Natal province of South Africa. The current study elucidated the cytokine/chemokine responses induced by representatives of the F15/LAM4/KZN and other dominant strain families in pulmonary epithelial cells. Multiplex cytokine analyses were performed at 24, 48 and 72h post infection of the A549 pulmonary epithelial cell line with the F15/LAM4/KZN, F28, F11, Beijing, Unique and H37Rv strains at an MOI of ∼10:1. Twenty-three anti- and pro-inflammatory cytokines/chemokines were detected at all-time intervals. Significantly high concentrations of IL-6, IFN-γ, TNF-α and G-CSF at 48h, and IL-8, IFN-γ, TNF-α, G-CSF and GM-CSF at 72h, were induced by the F28 and F15/LAM4/KZN strains, respectively. Lower levels of cytokines/chemokines were induced by either the Beijing or Unique strains at all three time intervals. All strains induced up-regulation of pathogen recognition receptors (PRRs) (TLR3 and TLR5) while only the F15/LAM4/KZN, F11 and F28 strains induced significant differential expression of TLR2 compared to the Beijing, Unique and H37Rv strains. The low induction of cytokines in epithelial cells by the Beijing strain correlates with its previously reported hypervirulent properties. High concentrations of cytokines and chemokines required for early protection against M. tuberculosis infections induced by the F15/LAM4/KZN and F28 strains suggests a lower virulence of these genotypes compared to the Beijing strain. These findings demonstrate the high diversity in host cytokine/chemokine response to early infection of pulmonary epithelial cells by different strains of M. tuberculosis. Copyright © 2017 Elsevier Ltd. All rights reserved.
NASA Astrophysics Data System (ADS)
Heilbronner, Renée
2017-04-01
2017 marks the 50th anniversary of the publication of John Ramsay's well known textbook "Folding and Fracturing of Rocks" - ... and the 30th anniversary of the rejection of a rather less well known paper entitled "Strain: Fact or Fiction?" submitted by Renée Panozzo to the Journal of Structural Geology. The gist of the paper was simple and straight forward: it was argued that not every fabric that can be observed in deformed rocks is necessarily a measure of the amount of strain the rock incurred. A distinction was made between a general "fabric", i.e., the traceable geometry of grain boundaries, for example, and a so-called "strain fabric", i.e., the model geometry that would result from homogeneously straining an initially isotropic fabric and that would exhibit at least orthorhombic symmetry. To verify if a given fabric was indeed a strain fabric it was therefore suggested to use the SURFOR method (published by Panozzo) and to carry out a so-called strain test, i.e., a check of symmetry, before interpreting the results of a fabric analysis in terms of strain. The problem with the paper was that it was very obviously written out of frustration. The frustration came form having reviewed a number of manuscripts which tried to use the then novel SURFOR method for strain analysis without first checking if the the fabric was a indeed a "strain fabric" or not, and then blaming the SURFOR method for producing ambiguous results. As a result, the paper was not exactly well balanced and carefully thought out. It was considered "interesting but not scholarly" by one of the reviewers and down-right offensive by the second. To tell the truth, however, the paper was not formally rejected. The editor Sue Treagus strongly encouraged Panozzo to revise the paper, ... and 30 years later, I will follow her advise and offer a revised paper as a tribute to John Ramsay. To quote from the original manuscript: "We should be a little more impressed that strain works so well, and less
Biological assay of attenuated strain NADL-2 and virulent strain NADL-8 of porcine parvovirus.
Mengeling, W L; Pejsak, Z; Paul, P S
1984-11-01
Attenuated strain NADL-2 and virulent strain NADL-8 of porcine parvovirus (PPV) were titrated in vivo and in vitro under similar conditions to provide a better understanding of some of the factors involved in virulence of PPV in causing maternal reproductive failure of swine. Both strains cause fetal death when they are injected directly into fetal fluids, but only strain NADL-8 does so when administered to pregnant swine. The strains were tested for their hemagglutinating activity (HA), median cell culture infective dose (CCID50), median fetal infective dose (FID50), and median fetal lethal dose (FLD50). The FID50 and FLD50 were determined by injecting virus directly into the amniotic fluid of fetuses in utero at 44 +/- 2 days of gestation and collecting the fetuses 15 +/- 1 days later. Both strains had an HA titer of 64, suggesting that there is a similar number of virions in stock preparations. However, other measurements differed markedly. The CCID50, FID50, and FLD50 were 10(5.5), 10(3.5), and 10(0.5), respectively, for strain NADL-2, and 10(4.5), 10(7.7), and 10(6.3), respectively, for strain NADL-8. Collectively, the values indicate that more than 10,000 times as much strain NADL-2 would need to reach the conceptus transplacentally to establish infection. These observations may help to explain the different consequences of oronasal exposure of pregnant swine to these strains of PPV.
Noninvasive characterization of carotid plaque strain.
Khan, Amir A; Sikdar, Siddhartha; Hatsukami, Thomas; Cebral, Juan; Jones, Michael; Huston, John; Howard, George; Lal, Brajesh K
2017-06-01
Current risk stratification of internal carotid artery plaques based on diameter-reducing percentage stenosis may be unreliable because ischemic stroke results from plaque disruption with atheroembolization. Biomechanical forces acting on the plaque may render it vulnerable to rupture. The feasibility of ultrasound-based quantification of plaque displacement and strain induced by hemodynamic forces and their relationship to high-risk plaques have not been determined. We studied the feasibility and reliability of carotid plaque strain measurement from clinical B-mode ultrasound images and the relationship of strain to high-risk plaque morphology. We analyzed carotid ultrasound B-mode cine loops obtained in patients with asymptomatic ≥50% stenosis during routine clinical scanning. Optical flow methods were used to quantify plaque motion and shear strain during the cardiac cycle. The magnitude (maximum absolute shear strain rate [MASSR]) and variability (entropy of shear strain rate [ESSR] and variance of shear strain rate [VSSR]) of strain were combined into a composite shear strain index (SSI), which was assessed for interscan repeatability and correlated with plaque echolucency. Nineteen patients (mean age, 70 years) constituting 36 plaques underwent imaging; 37% of patients (n = 7) showed high strain (SSI ≥0.5; MASSR, 2.2; ESSR, 39.7; VSSR, 0.03) in their plaques; the remaining clustered into a low-strain group (SSI <0.5; MASSR, 0.58; ESSR, 21.2; VSSR, 0.002). The area of echolucent morphology was greater in high-strain plaques vs low-strain plaques (28% vs 17%; P = .018). Strain measurements showed low variability on Bland-Altman plots with cluster assignment agreement of 76% on repeated scanning. Two patients developed a stroke during 2 years of follow-up; both demonstrated high SSI (≥0.5) at baseline. Carotid plaque strain is reliably computed from routine B-mode imaging using clinical ultrasound machines. High plaque strain correlates with known
Eto, Tomoo; Takahashi, Riichi; Kamisako, Tsutomu
2015-04-01
Strain preservation of experimental animals is crucial for experimental reproducibility. Maintaining complete animal strains, however, is costly and there is a risk for genetic mutations as well as complete loss due to disasters or illness. Therefore, the development of effective vitrification techniques for cryopreservation of multiple experimental animal strains is important. We examined whether a vitrification method using cryoprotectant solutions, P10 and PEPeS, is suitable for preservation of multiple inbred and outbred mouse strains. First, we investigated whether our vitrification method using cryoprotectant solutions was suitable for two-cell stage mouse embryos. In vitro development of embryos exposed to the cryoprotectant solutions was similar to that of fresh controls. Further, the survival rate of the vitrified embryos was extremely high (98.1%). Next, we collected and vitrified two-cell stage embryos of 14 mouse strains. The average number of embryos obtained from one female was 7.3-33.3. The survival rate of vitrified embryos ranged from 92.8% to 99.1%, with no significant differences among mouse strains. In vivo development did not differ significantly between fresh controls and vitrified embryos of each strain. For strain preservation using cryopreserved embryos, two offspring for inbred lines and one offspring for outbred lines must be produced from two-cell stage embryos collected from one female. The expected number of surviving fetuses obtained from embryos collected from one female of either the inbred or outbred strains ranged from 2.9 to 19.5. The findings of the present study indicated that this vitrification method is suitable for strain preservation of multiple mouse strains. Copyright © 2015 The Authors. Published by Elsevier Inc. All rights reserved.
NASA Technical Reports Server (NTRS)
Barranger, John P.
1990-01-01
A novel optical method of measuring 2-D surface strain is proposed. Two linear strains along orthogonal axes and the shear strain between those axes is determined by a variation of Yamaguchi's laser-speckle strain gage technique. It offers the advantages of shorter data acquisition times, less stringent alignment requirements, and reduced decorrelation effects when compared to a previously implemented optical strain rosette technique. The method automatically cancels the translational and rotational components of rigid body motion while simplifying the optical system and improving the speed of response.
Colony Dimorphism in Bradyrhizobium Strains
Sylvester-Bradley, Rosemary; Thornton, Philip; Jones, Peter
1988-01-01
Ten isolates of Bradyrhizobium spp. which form two colony types were studied; the isolates originated from a range of legume species. The two colony types differed in the amount of gum formed or size or both, depending on the strain. Whole 7-day-old colonies of each type were subcultured to determine the proportion of cells which had changed to the other type. An iterative computerized procedure was used to determine the rate of switching per generation between the two types and to predict proportions reached at equilibrium for each strain. The predicted proportions of the wetter (more gummy) or larger colony type at equilibrium differed significantly between strains, ranging from 0.9999 (strain CIAT 2383) to 0.0216 (strain CIAT 2469), because some strains switched faster from dry to wet (or small to large) and others switched faster from wet to dry (or large to small). Predicted equilibrium was reached after about 140 generations in strain USDA 76. In all but one strain (CIAT 3030) the growth rate of the wetter colony type was greater than or similar to that of the drier type. The mean difference in generation time between the two colony types was 0.37 h. Doubling times calculated for either colony type after 7 days of growth on the agar surface ranged from 6.0 to 7.3 h. The formation of two persistent colony types by one strain (clonal or colony dimorphism) may be a common phenomenon among Bradyrhizobium strains. Images PMID:16347599
Echocardiographic strain and strain-rate imaging: a new tool to study regional myocardial function.
D'hooge, Jan; Bijnens, Bart; Thoen, Jan; Van de Werf, Frans; Sutherland, George R; Suetens, Paul
2002-09-01
Ultrasonic imaging is the noninvasive clinical imaging modality of choice for diagnosing heart disease. At present, two-dimensional ultrasonic grayscale images provide a relatively cheap, fast, bedside method to study the morphology of the heart. Several methods have been proposed to assess myocardial function. These have been based on either grayscale or motion (velocity) information measured in real-time. However, the quantitative assessment of regional myocardial function remains an important goal in clinical cardiology. To do this, ultrasonic strain and strain-rate imaging have been introduced. In the clinical setting, these techniques currently only allow one component of the true three-dimensional deformation to be measured. Clinical, multidimensional strain (rate) information can currently thus only be obtained by combining data acquired using different transducer positions. Nevertheless, given the appropriate postprocessing, the clinical value of these techniques has already been shown. Moreover, multidimensional strain and strain-rate estimation of the heart in vivo by means of a single ultrasound acquisition has been shown to be feasible. In this paper, the new techniques of ultrasonic strain rate and strain imaging of the heart are reviewed in terms of definitions, data acquisition, strain-rate estimation, postprocessing, and parameter extraction. Their clinical validation and relevance will be discussed using clinical examples on relevant cardiac pathology. Based on these examples, suggestions are made for future developments of these techniques.
Strain Insensitive Optical Phase Locked Loop
NASA Technical Reports Server (NTRS)
Egalon, Claudio Oliviera (Inventor); Rogowski, Robert S. (Inventor)
1996-01-01
An apparatus is provided to allow for quasi distributed sensing of strain within a test object. Strain insensitive fiber is used to deliver a light signal to a strain sensitive fiber in an optical phase locked loop sensor configuration. The use of strain insensitive delivery fiber allows for non-integrated measurements of strain without the use of expensive electronics such as those employed in ODTR techniques. The novelty of the present invention lies in the use of strain insensitive multimode fiber. The inventors had previously developed a similar sensor with strain insensitive fiber, however it was restricted to the use of single or few mode fibers. The use of an optical phase locked loop arrangement allows for the use of multimode strain insensitive fiber.
Bodie, E A; Armstrong, G L; Dunn-Coleman, N S
1994-05-01
Parasexual recombination was used to obtain improved chymosin-producing strains and to perform genetic analysis on existing strains. Chlorate resistance was used to select for a variety of spontaneous nitrate assimilation pathway mutations in strains previously improved for chymosin production using classical strain improvement methods including mutation and screening, and selection for 2-deoxyglucose resistance (dgr). Diploids of these improved strains were generated via parasexual recombination and were isolated on selective media by complementation of nitrate assimilation mutations. A preliminary genetic analysis of diploid and haploid segregants indicated that the dgr trait, resulting in overexpression of chymosin, was recessive. Also, mutations in two different dgr genes resulted in an increased level of chymosin production. When these mutations were combined via parasexual recombination, the resulting haploid segregants produced about 15% more chymosin than either parental strain. CHEF gel electrophoresis was used to determine the chromosomal location of the integrated chymosin DNA sequences, and to verify diploidy in one case where the chromosome composition of two haploid parents differed.
NASA Astrophysics Data System (ADS)
Helama, Samuli; Sohar, Kristina; Läänelaid, Alar; Bijak, Szymon; Jaagus, Jaak
2018-06-01
There is plenty of evidence for intensification of the global hydrological cycle. In Europe, the northern areas are predicted to receive more precipitation in the future and observational evidence suggests a parallel trend over the past decades. As a consequence, it would be essential to place the recent trend in precipitation in the context of proxy-based estimates of reconstructed precipitation variability over the past centuries. Tree rings are frequently used as proxy data for palaeoclimate reconstructions. Here we use deciduous ( Quercus robur) and coniferous ( Picea abies) tree-ring width chronologies from western Estonia to deduce past early-summer (June) precipitation variability since 1771. Statistical model transforming our tree-ring data into estimates of precipitation sums explains 42% of the variance in instrumental variability. Comparisons with products of gridded reconstructions of soil moisture and summer precipitation illustrate robust correlations with soil moisture (Palmer Drought Severity Index), but lowered correlation with summer precipitation estimates prior to mid-nineteenth century, these instabilities possibly reflecting the general uncertainties inherent to early meteorological and proxy data. Reconstructed precipitation variability was negatively correlated to the teleconnection indices of the North Atlantic Oscillation and the Scandinavia pattern, on annual to decadal and longer scales. These relationships demonstrate the positive precipitation anomalies to result from increase in zonal inflow and cyclonic activity, the negative anomalies being linked with the high pressure conditions enhanced during the atmospheric blocking episodes. Recently, the instrumental data have demonstrated a remarkable increase in summer (June) precipitation in the study region. Our tree-ring based reconstruction reproduces this trend in the context of precipitation history since eighteenth century and quantifies the unprecedented abundance of June
Segregation of genes from donor strain during the production of recombinant congenic strains.
van Zutphen, L F; Den Bieman, M; Lankhorst, A; Demant, P
1991-07-01
Recombinant congenic strains (RCS) constitute a set of inbred strains which are designed to dissect the genetic control of multigenic traits, such as tumour susceptibility or disease resistance. Each RCS contains a small fraction of the genome of a common donor strain, while the majority of genes stem from a common background strain. We tested at two stages of the inbreeding process in 20 RCS, derived from BALB/cHeA and STS/A, to see whether alleles from the STS/A donor strain are distributed over the RCS in a ratio as would theoretically be expected. Four marker genes (Pep-3; Pgm-1; Gpi-1 and Es-3) located at 4 different chromosomes were selected and the allelic distribution was tested after 3-4 and after 12 generations of inbreeding. The data obtained do not significantly deviate from the expected pattern, thus supporting the validity of the concept of RCS.
Thin film strain transducer. [suitable for in-flight measurement of scientific balloon strain
NASA Technical Reports Server (NTRS)
Rand, J. L. (Inventor)
1985-01-01
A strain transducer system and process for making same is disclosed wherein a beryllium-copper ring having four strain gages disposed thereon is electrically connected in Wheatstone bridge fashion to output instrumentation. Tabs are bonded to a balloon or like surface with strain on the surface causing bending of the ring and providing an electrical signal through the gages proportional to the surface strain. A figure is provided which illustrates a pattern of a one-half ring segment as placed on a sheet of beryllium-copper for chem-mill etch formation, prior to bending and welding of a pair of the segments to form a ring structure.
Song, Bo; Sanborn, Brett
2018-05-07
In this paper, a Johnson–Cook model was used as an example to analyze the relationship of compressive stress-strain response of engineering materials experimentally obtained at constant engineering and true strain rates. There was a minimal deviation between the stress-strain curves obtained at the same constant engineering and true strain rates. The stress-strain curves obtained at either constant engineering or true strain rates could be converted from one to the other, which both represented the intrinsic material response. There is no need to specify the testing requirement of constant engineering or true strain rates for material property characterization, provided that eithermore » constant engineering or constant true strain rate is attained during the experiment.« less
DOE Office of Scientific and Technical Information (OSTI.GOV)
Song, Bo; Sanborn, Brett
In this paper, a Johnson–Cook model was used as an example to analyze the relationship of compressive stress-strain response of engineering materials experimentally obtained at constant engineering and true strain rates. There was a minimal deviation between the stress-strain curves obtained at the same constant engineering and true strain rates. The stress-strain curves obtained at either constant engineering or true strain rates could be converted from one to the other, which both represented the intrinsic material response. There is no need to specify the testing requirement of constant engineering or true strain rates for material property characterization, provided that eithermore » constant engineering or constant true strain rate is attained during the experiment.« less
NASA Astrophysics Data System (ADS)
Bressan, José Divo; Liewald, Mathias; Drotleff, Klaus
2017-10-01
Forming limit strain curves of conventional aluminium alloy AA6014 sheets after loading with non-linear strain paths are presented and compared with D-Bressan macroscopic model of sheet metal rupture by critical shear stress criterion. AA6014 exhibits good formability at room temperature and, thus, is mainly employed in car body external parts by manufacturing at room temperature. According to Weber et al., experimental bi-linear strain paths were carried out in specimens with 1mm thickness by pre-stretching in uniaxial and biaxial directions up to 5%, 10% and 20% strain levels before performing Nakajima testing experiments to obtain the forming limit strain curves, FLCs. In addition, FLCs of AA6014 were predicted by employing D-Bressan critical shear stress criterion for bi-linear strain path and comparisons with the experimental FLCs were analyzed and discussed. In order to obtain the material coefficients of plastic anisotropy, strain and strain rate hardening behavior and calibrate the D-Bressan model, tensile tests, two different strain rate on specimens cut at 0°, 45° and 90° to the rolling direction and also bulge test were carried out at room temperature. The correlation of experimental bi-linear strain path FLCs is reasonably good with the predicted limit strains from D-Bressan model, assuming equivalent pre-strain calculated by Hill 1979 yield criterion.
Dynamic Tensile Properties of Iron and Steels for a Wide Range of Strain Rates and Strain
NASA Astrophysics Data System (ADS)
Kojima, Nobusato; Hayashi, Hiroyuki; Yamamoto, Terumi; Mimura, Koji; Tanimura, Shinji
The tensile stress-strain curves of iron and a variety of steels, covering a wide range of strength level, over a wide strain rate range on the order of 10-3 ~ 103 s-1, were obtained systematically by using the Sensing Block Type High Speed Material Testing System (SBTS, Saginomiya). Through intensive analysis of these results, the strain rate sensitivity of the flow stress for the large strain region, including the viscous term at high strain rates, the true fracture strength and the true fracture strain were cleared for the material group of the ferrous metals. These systematical data may be useful to develop a practical constitutive model for computer codes, including a fracture criterion for simulations of the dynamic behavior in crash worthiness studies and of work-pieces subjected to dynamic plastic working for a wide strain rate range.
The Effect of Strain Rate on the Evolution of Plane Wakes Subjected to Irrotational Strains
NASA Technical Reports Server (NTRS)
Rogers, Michael M.; Merriam, Marshal (Technical Monitor)
1996-01-01
Direct numerical simulations of time-evolving turbulent plane wakes developing in the presence of irrotational plane strain applied at three different strain rates have been generated. The strain geometry is such that the flow is compressed in the streamwise direction and expanded in the cross-stream direction with the spanwise direction being unstrained. This geometry is the temporally evolving analogue of a spatially evolving wake in an adverse pressure gradient. A pseudospectral numerical method with up to 16 million modes is used to solve the equations in a reference frame moving with the irrotational strain. The initial condition for each simulation is taken from a previous turbulent self-similar plane wake direct numerical simulation at a velocity deficit Reynolds number, Re, of about 2,000. Although the evolutions of many statistics are nearly collapsed when plotted against total strain, there are some differences owing to the different strain rate histories. The impact of strain-rate on the wake spreading rate, the peak velocity deficit, the Reynolds stress profiles, and the flow structure is examined.
Bei, Hongbin; Xia, Yuzhi; Barabash, Rozaliya; ...
2015-08-10
Pre-straining defect-free single crystals will introduce heterogeneous dislocation nucleation sources that reduce the measured strength from the theoretical value, while pre-straining bulk samples will lead to strain hardening. Their competition is investigated by nanoindentation pop-in tests on variously pre-strained Mo single crystals with several indenter radii (~micrometer). Pre-straining primarily shifts deformation mechanism from homogeneous dislocation nucleation to a stochastic behavior, while strain hardening plays a secondary role, as summarized in a master plot of pop-in strength versus normalized indenter radius.
Liu, Miao; Yang, Xiao-Ning; Zhu, Hui-Xia; Jia, Yuan-Yuan; Jia, Shi-Ru; Piergiovanni, Luciano
2014-01-01
A better understanding of metabolic fluxes is important for manipulating microbial metabolism toward desired end products, or away from undesirable by-products. A mutant strain, Gluconacetobacter xylinus AX2-16, was obtained by combined chemical mutation of the parent strain (G. xylinus CGMCC 2955) using DEC (diethyl sulfate) and LiCl. The highest bacterial cellulose production for this mutant was obtained at about 11.75 g/L, which was an increase of 62% compared with that by the parent strain. In contrast, gluconic acid (the main byproduct) concentration was only 5.71 g/L for mutant strain, which was 55.7% lower than that of parent strain. Metabolic flux analysis indicated that 40.1% of the carbon source was transformed to bacterial cellulose in mutant strain, compared with 24.2% for parent strain. Only 32.7% and 4.0% of the carbon source were converted into gluconic acid and acetic acid in mutant strain, compared with 58.5% and 9.5% of that in parent strain. In addition, a higher flux of tricarboxylic acid (TCA) cycle was obtained in mutant strain (57.0%) compared with parent strain (17.0%). It was also indicated from the flux analysis that more ATP was produced in mutant strain from pentose phosphate pathway (PPP) and TCA cycle. The enzymatic activity of succinate dehydrogenase (SDH), which is one of the key enzymes in TCA cycle, was 1.65-fold higher in mutant strain than that in parent strain at the end of culture. It was further validated by the measurement of ATPase that 3.53–6.41 fold higher enzymatic activity was obtained from mutant strain compared with parent strain. PMID:24901455
Mumps Hoshino and Torii vaccine strains were distinguished from circulating wild strains.
Sawada, Akihito; Yamaji, Yoshiaki; Nakayama, Tetsuo
2013-06-01
Aseptic meningitis and acute parotitis have been observed after mumps vaccination. Mumps outbreaks have been reported in Japan because of low vaccine coverage, and molecular differentiation is required to determine whether these cases are vaccine associated. RT-nested PCR was performed in the small hydrophobic gene region, and viruses were differentiated by restriction fragment length polymorphism assay. A total of 584 nucleotides were amplified. The PCR product of the Hoshino strain was cut into two fragments (313 and 271 nucleotides) by MfeI; that of the Torii strain was digested with EcoT22I, resulting in 332- and 252-nucleotide fragments. Both strains were genotype B and had an XbaI site, resulting in two fragments: 299 and 285 nucleotides. Current circulating wild types were cut only by XbaI or MfeI. However, the MfeI site of the wild types was different from that of the Hoshino strain, resulting in 451- and 133-nucleotide fragments. Using three restriction enzymes, two mumps vaccine strains were distinguished from wild types, and this separation was applied to the identification of vaccine-related adverse events.
Aiello, B. R.; Iriarte-Diaz, J.; Blob, R. W.; Butcher, M. T.; Carrano, M. T.; Espinoza, N. R.; Main, R. P.; Ross, C. F.
2015-01-01
Hypotheses suggest that structural integrity of vertebrate bones is maintained by controlling bone strain magnitude via adaptive modelling in response to mechanical stimuli. Increased tissue-level strain magnitude and rate have both been identified as potent stimuli leading to increased bone formation. Mechanotransduction models hypothesize that osteocytes sense bone deformation by detecting fluid flow-induced drag in the bone's lacunar–canalicular porosity. This model suggests that the osteocyte's intracellular response depends on fluid-flow rate, a product of bone strain rate and gradient, but does not provide a mechanism for detection of strain magnitude. Such a mechanism is necessary for bone modelling to adapt to loads, because strain magnitude is an important determinant of skeletal fracture. Using strain gauge data from the limb bones of amphibians, reptiles, birds and mammals, we identified strong correlations between strain rate and magnitude across clades employing diverse locomotor styles and degrees of rhythmicity. The breadth of our sample suggests that this pattern is likely to be a common feature of tetrapod bone loading. Moreover, finding that bone strain magnitude is encoded in strain rate at the tissue level is consistent with the hypothesis that it might be encoded in fluid-flow rate at the cellular level, facilitating bone adaptation via mechanotransduction. PMID:26063842
NASA Astrophysics Data System (ADS)
Hsu, Ya-Ju; Chang, Yuan-Shu; Liu, Chi-Ching; Lee, Hsin-Ming; Linde, Alan T.; Sacks, Selwyn I.; Kitagawa, Genshio; Chen, Yue-Gau
2015-06-01
Taiwan experiences high deformation rates, particularly along its eastern margin where a shortening rate of about 30 mm/yr is experienced in the Longitudinal Valley and the Coastal Range. Four Sacks-Evertson borehole strainmeters have been installed in this area since 2003. Liu et al. (2009) proposed that a number of strain transient events, primarily coincident with low-barometric pressure during passages of typhoons, were due to deep-triggered slow slip. Here we extend that investigation with a quantitative analysis of the strain responses to precipitation as well as barometric pressure and the Earth tides in order to isolate tectonic source effects. Estimates of the strain responses to barometric pressure and groundwater level changes for the different stations vary over the ranges -1 to -3 nanostrain/millibar(hPa) and -0.3 to -1.0 nanostrain/hPa, respectively, consistent with theoretical values derived using Hooke's law. Liu et al. (2009) noted that during some typhoons, including at least one with very heavy rainfall, the observed strain changes were consistent with only barometric forcing. By considering a more extensive data set, we now find that the strain response to rainfall is about -5.1 nanostrain/hPa. A larger strain response to rainfall compared to that to air pressure and water level may be associated with an additional strain from fluid pressure changes that take place due to infiltration of precipitation. Using a state-space model, we remove the strain response to rainfall, in addition to those due to air pressure changes and the Earth tides, and investigate whether corrected strain changes are related to environmental disturbances or tectonic-original motions. The majority of strain changes attributed to slow earthquakes seem rather to be associated with environmental factors. However, some events show remaining strain changes after all corrections. These events include strain polarity changes during passages of typhoons (a characteristic that is
An ultrasensitive strain sensor with a wide strain range based on graphene armour scales.
Yang, Yi-Fan; Tao, Lu-Qi; Pang, Yu; Tian, He; Ju, Zhen-Yi; Wu, Xiao-Ming; Yang, Yi; Ren, Tian-Ling
2018-06-12
An ultrasensitive strain sensor with a wide strain range based on graphene armour scales is demonstrated in this paper. The sensor shows an ultra-high gauge factor (GF, up to 1054) and a wide strain range (ε = 26%), both of which present an advantage compared to most other flexible sensors. Moreover, the sensor is developed by a simple fabrication process. Due to the excellent performance, this strain sensor can meet the demands of subtle, large and complex human motion monitoring, which indicates its tremendous application potential in health monitoring, mechanical control, real-time motion monitoring and so on.
McAlister, A.; Sandström, P.; Puska, P.; Veijo, A.; Chereches, R.; Heidmets, L. T.
2001-01-01
OBJECTIVE: To study the cultural differences in moral disengagement, which lends support to attitudes used to justify violence. METHODS: We carried out classroom surveys of a total of 3122 students in the USA (Houston, TX, and Washington, DC) and in four European countries--Estonia (Tartu), Finland (Helsinki), Romania (Satu Mare) and the Russian Federation (St Petersburg). Data were also taken from a random sample telephone survey of 341 young adults (aged 18-35 years) in Texas, USA. Ten distinct groups were studied. Seven questions were common to all the surveys, using identical statements about the participants' agreement with attitudes relating to war, diplomacy, killing, and the punishment of children. FINDINGS: The US students were more likely than those in Europe to agree with the following statements: "War is necessary" (20% vs 9%), "A person has the right to kill to defend property" (54% vs 17%), and "Physical punishment is necessary for children" (27% vs 10%). Justification of war and killing was less common among females than males in all groups; other differences within the US groups and the European groups were smaller than the differences between the US and European groups. CONCLUSION: The results confirm the gap between the US and European groups in moral disengagement attitudes and tendencies that could lead to deadly violence. PMID:11417032
Large Strain Behaviour of ZEK100 Magnesium Alloy at Various Strain Rates
NASA Astrophysics Data System (ADS)
Lévesque, Julie; Kurukuri, Srihari; Mishra, Raja; Worswick, Michael; Inal, Kaan
A constitutive framework based on a rate-dependent crystal plasticity theory is employed to simulate large strain deformation in hexagonal closed-packed metals that deform by slip and twinning. The model allows the twinned zones and the parent matrix to rotate independently. ZEK100 magnesium alloy sheets which significant texture weakening compared to AZ31 sheets are investigated using the model. There is considerable in-plane anisotropy and tension compression asymmetry in the flow behavior of ZEK100. Simulations of uniaxial tension in different directions at various strain rates and the accompanying texture evolution are performed and they are in very good agreement with experimental measurements. The effect of strain rate on the activation of the various slip systems and twinning show that differences in the strain rate dependence of yield stress and Rvalues in ZEK100 have their origin in the activation of different deformation mechanisms.
Material approaches to stretchable strain sensors.
Park, Jaeyoon; You, Insang; Shin, Sangbaie; Jeong, Unyong
2015-04-27
With the recent progress made in wearable electronics, devices now require high flexibility and stretchability up to large strain levels (typically larger than 30 % strain). Wearable strain sensors or deformable strain sensors have been gaining increasing research interest because of the rapid development of electronic skins and robotics and because of their biomedical applications. Conventional brittle strain sensors made of metals and piezoresistors are not applicable for such stretchable sensors. This Review summarizes recent advances in stretchable sensors and focuses on material aspects for high stretchability and sensitivity. It begins with a brief introduction to the Wheatstone bridge circuit of conventional resistive strain sensors. Then, studies on the manipulation of materials are reviewed, including waved structural approaches for making metals and semiconductors stretchable, the use of liquid metals, and conductive filler/elastomer composites by using percolation among the fillers. For capacitive strain sensors, the constant conductivity of the electrode is a key factor in obtaining reliable sensors. Possible approaches to developing capacitive strain sensors are presented. This Review concludes with a discussion on the major challenges and perspectives related to stretchable strain sensors. © 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.
Martínez-Hidalgo, Pilar; Ramírez-Bahena, Martha Helena; Flores-Félix, José David; Rivas, Raúl; Igual, José M; Mateos, Pedro F; Martínez-Molina, Eustoquio; León-Barrios, Milagros; Peix, Álvaro; Velázquez, Encarna
2015-06-01
The species Mesorhizobim loti was isolated from nodules of Lotus corniculatus and its type strain deposited in several collections. Some of these type strains, such as those deposited in the USDA and ATCC collections before 1990, are not coincident with the original strain, NZP 2213T, deposited in the NZP culture collection. The analysis of the 16S rRNA gene showed that strains USDA 3471T and ATCC 33669T formed independent branches from that occupied by Mesorhizobium loti NZP 2213T and related to those occupied by Mesorhizobium opportunistum WSM2075T and Mesorhizobium huakuii IFO 15243T, respectively, with 99.9 % similarity in both cases. However, the analysis of concatenated recA, atpD and glnII genes with similarities lower than 96, 98 and 94 %, respectively, between strains USDA 3471T and M. opportunistum WSM2075T and between strains ATCC 33669T and M. huakuii IFO 15243T, indicated that the strains USDA 3471T and ATCC 33669T represent different species of the genus Mesorhizobium. These results were confirmed by DNA-DNA hybridization experiments and phenotypic characterization. Therefore, the two strains were reclassified as representatives of the two species Mesorhizobium erdmanii sp. nov. (type strain USDA 3471T = CECT 8631T = LMG 17826t2T) and Mesorhizobium jarvisii sp. nov. (type strain ATCC 33669T = CECT 8632T = LMG 28313T).
Origin of the Strain Sensitivity for an Organic Heptazole Thin-Film and Its Strain Gauge Application
NASA Astrophysics Data System (ADS)
Bae, Heesun; Jeon, Pyo Jin; Park, Ji Hoon; Lee, Kimoon
2018-04-01
The authors report on the origin of the strain sensitivity for an organic C26H16N2 (heptazole) thinfilm and its application for the detection of tensile strain. From the electrical characterization on the thin-film transistor adopting a heptazole channel, heptazole film exhibits p-channel conduction with a relatively low value of field-effect mobility (0.05 cm2/Vs), suggesting a hopping conduction behavior via hole carriers. By analyzing the strain and temperature dependences of the electrical conductivity, we reveal that the electrical conduction for a heptazole thin-film is dominated by the variable range hopping process with quite a large energy separation (224.9 meV) between the localized states under a relatively long attenuation length (10.46 Å). This indicates that a change in the inter-grain spacing that is much larger than the attenuation length is responsible for the reversible modification of electrical conductivity depending on strain for the heptazole film. By utilizing our heptazole thin-film both as a strain sensitive passive resistor and an active semiconducting channel layer, we can achieve a strain gauge device exhibiting reversible endurance for tensile strains up to 2.12%. Consequently, this study advances the understanding of the fundamental strain sensing mechanism in a heptazole thin-film toward finding a promise material with a strain gauge for applications as potential flexible devices and/or wearable electronics.
DefenseLink.mil - Special Report - Travels With Gates
of Estonia Estonia Defense Secretary Robert M. Gates holds a press conference after the Tallinn High . Sgt. Jerry Morrison Defense Secretary Robert M. Gates holds a press conference after the Tallinn High . Sgt. Jerry Morrison Defense Secretary Robert M. Gates walks with the Prime Minister of Estonia Andrus
Creep Strain and Strain Rate Response of 2219 Al Alloy at High Stress Levels
NASA Technical Reports Server (NTRS)
Taminger, Karen M. B.; Wagner, John A.; Lisagor, W. Barry
1998-01-01
As a result of high localized plastic deformation experienced during proof testing in an International Space Station connecting module, a study was undertaken to determine the deformation response of a 2219-T851 roll forging. After prestraining 2219-T851 Al specimens to simulate strains observed during the proof testing, creep tests were conducted in the temperature range from ambient temperature to 107 C (225 F) at stress levels approaching the ultimate tensile strength of 2219-T851 Al. Strain-time histories and strain rate responses were examined. The strain rate response was extremely high initially, but decayed rapidly, spanning as much as five orders of magnitude during primary creep. Select specimens were subjected to incremental step loading and exhibited initial creep rates of similar magnitude for each load step. Although the creep rates decreased quickly at all loads, the creep rates dropped faster and reached lower strain rate levels for lower applied loads. The initial creep rate and creep rate decay associated with primary creep were similar for specimens with and without prestrain; however, prestraining (strain hardening) the specimens, as in the aforementioned proof test, resulted in significantly longer creep life.
Strain-controlled nonvolatile magnetization switching
NASA Astrophysics Data System (ADS)
Geprägs, S.; Brandlmaier, A.; Brandt, M. S.; Gross, R.; Goennenwein, S. T. B.
2014-11-01
We investigate different approaches towards a nonvolatile switching of the remanent magnetization in single-crystalline ferromagnets at room temperature via elastic strain using ferromagnetic thin film/piezoelectric actuator hybrids. The piezoelectric actuator induces a voltage-controllable strain along different crystalline directions of the ferromagnetic thin film, resulting in modifications of its magnetization by converse magnetoelastic effects. We quantify the magnetization changes in the hybrids via ferromagnetic resonance spectroscopy and superconducting quantum interference device magnetometry. These measurements demonstrate a significant strain-induced change of the magnetization, limited by an inefficient strain transfer and domain formation in the particular system studied. To overcome these obstacles, we address practicable engineering concepts and use a model to demonstrate that a strain-controlled, nonvolatile magnetization switching should be possible in appropriately engineered ferromagnetic/piezoelectric actuator hybrids.
Attachment techniques for high temperature strain
NASA Astrophysics Data System (ADS)
Wnuk, Steve P., Jr.
1993-01-01
Attachment methods for making resistive strain measurements to 2500 F were studied. A survey of available strain gages and attachment techniques was made, and the results are compiled for metal and carbon composite test materials. A theoretical analysis of strain transfer into a bonded strain gage was made, and the important physical parameters of the strain transfer medium, the ceramic matrix, were identified. A pull tester to measure pull-out tests on commonly used strain gage cements indicated that all cements tested displayed adequate strength for good strain transfer. Rokide flame sprayed coatings produced significantly stronger bonds than ceramic cements. An in-depth study of the flame spray process produced simplified installation procedures which also resulted in greater reliability and durability. Application procedures incorporating improvements made during this program are appended to the report. Strain gages installed on carbon composites, Rene' 41, 316 stainless steel, and TZM using attachment techniques developed during this program were successfully tested to 2500 F. Photographs of installation techniques, test procedures, and graphs of the test data are included in this report.
Practical on-site measurement of heat strain with the use of a perceptual strain index.
Chan, Albert P C; Yang, Y
2016-02-01
There have been increased interests in research on quantifying heat strain of construction workers and formulating corresponding guidelines for working in hot weather. The aim of this study was to validate a subjective measurement tool, the perceptual strain index (PeSI), for measuring heat strain in real-work settings. A total of sixteen construction workers were invited to participate in the field surveys. Empiric-based human monitoring was carried out with simultaneous micrometeorological (wet-bulb globe temperature, WBGT), physiological (heart rate, HR), and perceptual (perceived exertion, RPE; thermal sensation, TS) measurements throughout the test. The relative heart rate (RHR), the physiological strain index (PSIHR), and the PeSI were then calculated accordingly. The PeSI exhibited moderate correlations with WBGT and RHR (r = 0.42 and 0.40, respectively), which indicated the PeSI was sensitive to the variants of WBGT and RHR. The results of regression analysis indicated that the PeSI changed in the same general manner as the PSIHR, with a relatively large determination coefficient (R(2) = 0.67). The established perceptual strain zone illustrated that the PeSI ranging from 7 to 8 would be the exposure limit of construction workers in hot weather. The PeSI is a simple, robust, reliable, and user-friendly tool for heat strain assessment in occupational settings. The perceptual strain zone will provide practical guidelines for on-site heat strain monitoring for construction workers.
Turbulent Plane Wakes Subjected to Successive Strains
NASA Technical Reports Server (NTRS)
Rogers, Michael M.
2003-01-01
Six direct numerical simulations of turbulent time-evolving strained plane wakes have been examined to investigate the response of a wake to successive irrotational plane strains of opposite sign. The orientation of the applied strain field has been selected so that the flow is the time-developing analogue of a spatially developing wake evolving in the presence of either a favourable or an adverse streamwise pressure gradient. The magnitude of the applied strain rate a is constant in time t until the total strain e(sup at) reaches about four. At this point, a new simulation is begun with the sign of the applied strain being reversed (the original simulation is continued as well). When the total strain is reduced back to its original value of one, yet another simulation is begun with the sign of the strain being reversed again back to its original sign. This process is done for both initially "favourable" and initially "adverse" strains, providing simulations for each of these strain types from three different initial conditions. The evolution of the wake mean velocity deficit and width is found to be very similar for all the adversely strained cases, with both measures rapidly achieving exponential growth at the rate associated with the cross-stream expansive strain e(sup at). In the "favourably" strained cases, the wake widths approach a constant and the velocity deficits ultimately decay rapidly as e(sup -2at). Although all three of these cases do exhibit the same asymptotic exponential behaviour, the time required to achieve this is longer for the cases that have been previously adversely strained (by at approx. equals 1). These simulations confirm the generality of the conclusions drawn in Rogers (2002) regarding the response of plane wakes to strain. The evolution of strained wakes is not consistent with the predictions of classical self-similar analysis; a more general equilibrium similarity solution is required to describe the results. At least for the cases
Electronic and optical properties of strained graphene and other strained 2D materials: a review.
Naumis, Gerardo G; Barraza-Lopez, Salvador; Oliva-Leyva, Maurice; Terrones, Humberto
2017-09-01
This review presents the state of the art in strain and ripple-induced effects on the electronic and optical properties of graphene. It starts by providing the crystallographic description of mechanical deformations, as well as the diffraction pattern for different kinds of representative deformation fields. Then, the focus turns to the unique elastic properties of graphene, and to how strain is produced. Thereafter, various theoretical approaches used to study the electronic properties of strained graphene are examined, discussing the advantages of each. These approaches provide a platform to describe exotic properties, such as a fractal spectrum related with quasicrystals, a mixed Dirac-Schrödinger behavior, emergent gravity, topological insulator states, in molecular graphene and other 2D discrete lattices. The physical consequences of strain on the optical properties are reviewed next, with a focus on the Raman spectrum. At the same time, recent advances to tune the optical conductivity of graphene by strain engineering are given, which open new paths in device applications. Finally, a brief review of strain effects in multilayered graphene and other promising 2D materials like silicene and materials based on other group-IV elements, phosphorene, dichalcogenide- and monochalcogenide-monolayers is presented, with a brief discussion of interplays among strain, thermal effects, and illumination in the latter material family.
Enzyme markers in inbred rat strains: genetics of new markers and strain profiles.
Adams, M; Baverstock, P R; Watts, C H; Gutman, G A
1984-08-01
Twenty-six inbred strains of the laboratory rat (Rattus norvegicus) were examined for electrophoretic variation at an estimated 97 genetic loci. In addition to previously documented markers, variation was observed for the enzymes aconitase, aldehyde dehydrogenase, and alkaline phosphatase. The genetic basis of these markers (Acon-1, Ahd-2, and Akp-1) was confirmed. Linkage analysis between 35 pairwise comparisons revealed that the markers Fh-1 and Pep-3 are linked. The strain profiles of the 25 inbred strains at 11 electrophoretic markers are given.
A wide extent of inter-strain diversity in virulent and vaccine strains of alphaherpesviruses.
Szpara, Moriah L; Tafuri, Yolanda R; Parsons, Lance; Shamim, S Rafi; Verstrepen, Kevin J; Legendre, Matthieu; Enquist, L W
2011-10-01
Alphaherpesviruses are widespread in the human population, and include herpes simplex virus 1 (HSV-1) and 2, and varicella zoster virus (VZV). These viral pathogens cause epithelial lesions, and then infect the nervous system to cause lifelong latency, reactivation, and spread. A related veterinary herpesvirus, pseudorabies (PRV), causes similar disease in livestock that result in significant economic losses. Vaccines developed for VZV and PRV serve as useful models for the development of an HSV-1 vaccine. We present full genome sequence comparisons of the PRV vaccine strain Bartha, and two virulent PRV isolates, Kaplan and Becker. These genome sequences were determined by high-throughput sequencing and assembly, and present new insights into the attenuation of a mammalian alphaherpesvirus vaccine strain. We find many previously unknown coding differences between PRV Bartha and the virulent strains, including changes to the fusion proteins gH and gB, and over forty other viral proteins. Inter-strain variation in PRV protein sequences is much closer to levels previously observed for HSV-1 than for the highly stable VZV proteome. Almost 20% of the PRV genome contains tandem short sequence repeats (SSRs), a class of nucleic acids motifs whose length-variation has been associated with changes in DNA binding site efficiency, transcriptional regulation, and protein interactions. We find SSRs throughout the herpesvirus family, and provide the first global characterization of SSRs in viruses, both within and between strains. We find SSR length variation between different isolates of PRV and HSV-1, which may provide a new mechanism for phenotypic variation between strains. Finally, we detected a small number of polymorphic bases within each plaque-purified PRV strain, and we characterize the effect of passage and plaque-purification on these polymorphisms. These data add to growing evidence that even plaque-purified stocks of stable DNA viruses exhibit limited sequence
Pellerin, D; Sharma, R; Elliott, P; Veyrat, C
2003-01-01
Tissue Doppler (TDE), strain, and strain rate echocardiography are emerging real time ultrasound techniques that provide a measure of wall motion. They offer an objective means to quantify global and regional left and right ventricular function and to improve the accuracy and reproducibility of conventional echocardiography studies. Radial and longitudinal ventricular function can be assessed by the analysis of myocardial wall velocity and displacement indices, or by the analysis of wall deformation using the rate of deformation of a myocardial segment (strain rate) and its deformation over time (strain). A quick and easy assessment of left ventricular ejection fraction is obtained by mitral annular velocity measurement during a routine study, especially in patients with poor endocardial definition or abnormal septal motion. Strain rate and strain are less affected by passive myocardial motion and tend to be uniform throughout the left ventricle in normal subjects. This paper reviews the underlying principles of TDE, strain, and strain rate echocardiography and discusses currently available quantification tools and clinical applications. PMID:14594870
NASA Astrophysics Data System (ADS)
Pesin, A.; Pustovoytov, D.; Shveyova, T.; Vafin, R.
2017-12-01
The level of a shear strain and equivalent strain plays a key role in terms of the possibility of using the asymmetric rolling process as a method of severe plastic deformation. Strain mode (pure shear or simple shear) can affect very strongly on the equivalent strain and the grain refinement of the material. This paper presents the results of FEM simulations and comparison of the equivalent strain in the aluminium alloy 5083 processed by a single-pass equal channel angular pressing (simple shear), symmetric rolling (pure shear) and asymmetric rolling (simultaneous pure and simple shear). The nonlinear effect of rolls speed ratio on the deformation characteristics during asymmetric rolling was found. Extremely high equivalent strain up to e=4.2 was reached during a single-pass asymmetric rolling. The influence of the shear strain on the level of equivalent strain is discussed. Finite element analysis of the deformation characteristics, presented in this study, can be used for optimization of the asymmetric rolling process as a method of severe plastic deformation.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Upadhyay, Piyush; Rohatgi, Aashish; Stephens, Elizabeth V.
2015-02-18
Al alloy AA7075 sheets were deformed at room temperature at strain-rates exceeding 1000 /s using the electrohydraulic forming (EHF) technique. A method that combines high speed imaging and digital image correlation technique, developed at Pacific Northwest National Laboratory, is used to investigate high strain rate deformation behavior of AA7075. For strain-rate sensitive materials, the ability to accurately model their high-rate deformation behavior is dependent upon the ability to accurately quantify the strain-rate that the material is subjected to. This work investigates the objectivity of software-calculated strain and strain rate by varying different parameters within commonly used commercially available digital imagemore » correlation software. Except for very close to the time of crack opening the calculated strain and strain rates are very consistent and independent of the adjustable parameters of the software.« less
Hydrogen production from microbial strains
Harwood, Caroline S; Rey, Federico E
2012-09-18
The present invention is directed to a method of screening microbe strains capable of generating hydrogen. This method involves inoculating one or more microbes in a sample containing cell culture medium to form an inoculated culture medium. The inoculated culture medium is then incubated under hydrogen producing conditions. Once incubating causes the inoculated culture medium to produce hydrogen, microbes in the culture medium are identified as candidate microbe strains capable of generating hydrogen. Methods of producing hydrogen using one or more of the microbial strains identified as well as the hydrogen producing strains themselves are also disclosed.
Boyanova, L; Gergova, G; Markovska, R; Yordanov, D; Mitov, I
2017-12-01
The aim of the study was to detect anti-Helicobacter pylori activity of seven Lactobacillus delbrueckii subsp. bulgaricus (GLB) strains by four cell-free supernatant (CFS) types. Activity of non-neutralized and non-heat-treated (CFSs1), non-neutralized and heat-treated (CFSs2), pH neutralized, catalase-treated and non-heat-treated (CFSs3), or neutralized, catalase- and heat-treated (CFSs4) CFSs against 18 H. pylori strains (11 of which with antibiotic resistance) was evaluated. All GLB strains produced bacteriocin-like inhibitory substances (BLISs), the neutralized CFSs of two GLB strains inhibited >81% of test strains and those of four GLB strains were active against >71% of antibiotic resistant strains. Two H. pylori strains were BLIS resistant. The heating did not reduce the CFS activity. Briefly, all GLB strains evaluated produced heat-stable BLISs, although GLB and H. pylori strain susceptibility patterns exhibited differences. Bacteriocin-like inhibitory substance activity can be an advantage for the probiotic choice for H. pylori infection control. In this study, anti-Helicobacter pylori activity of seven Lactobacillus delbrueckii subsp. bulgaricus (GLB) strains was evaluated by four cell-free supernatant (CFS) types. The GLB strains produced heat-stable bacteriocin-like inhibitory substances (BLISs) with a strong anti-H. pylori activity and some neutralized, catalase- and heat-treated CFSs inhibited >83% of the test strains. Bacteriocin-like inhibitory substance production of GLB strains can render them valuable probiotics in the control of H. pylori infection. © 2017 The Society for Applied Microbiology.
Strain screen and haplotype association mapping of wheel running in inbred mouse strains.
Lightfoot, J Timothy; Leamy, Larry; Pomp, Daniel; Turner, Michael J; Fodor, Anthony A; Knab, Amy; Bowen, Robert S; Ferguson, David; Moore-Harrison, Trudy; Hamilton, Alicia
2010-09-01
Previous genetic association studies of physical activity, in both animal and human models, have been limited in number of subjects and genetically homozygous strains used as well as number of genomic markers available for analysis. Expansion of the available mouse physical activity strain screens and the recently published dense single-nucleotide polymorphism (SNP) map of the mouse genome (approximately 8.3 million SNPs) and associated statistical methods allowed us to construct a more generalizable map of the quantitative trait loci (QTL) associated with physical activity. Specifically, we measured wheel running activity in male and female mice (average age 9 wk) in 41 inbred strains and used activity data from 38 of these strains in a haplotype association mapping analysis to determine QTL associated with activity. As seen previously, there was a large range of activity patterns among the strains, with the highest and lowest strains differing significantly in daily distance run (27.4-fold), duration of activity (23.6-fold), and speed (2.9-fold). On a daily basis, female mice ran further (24%), longer (13%), and faster (11%). Twelve QTL were identified, with three (on Chr. 12, 18, and 19) in both male and female mice, five specific to males, and four specific to females. Eight of the 12 QTL, including the 3 general QTL found for both sexes, fell into intergenic areas. The results of this study further support the findings of a moderate to high heritability of physical activity and add general genomic areas applicable to a large number of mouse strains that can be further mined for candidate genes associated with regulation of physical activity. Additionally, results suggest that potential genetic mechanisms arising from traditional noncoding regions of the genome may be involved in regulation of physical activity.
NASA Astrophysics Data System (ADS)
Matveenko, V. P.; Kosheleva, N. A.; Shardakov, I. N.; Voronkov, A. A.
2018-04-01
The presence of process-induced strains induced by various manufacturing and operational factors is one of the characteristics of polymer composite materials (PCM). Conventional methods of registration and evaluation of process-induced strains can be laborious, time-consuming and demanding in terms of technical applications. The employment of embedded fibre-optic strain sensors (FOSS) offers a real prospect of measuring residual strains. This paper demonstrates the potential for using embedded FOSS for recording technological strains in a PCM plate. The PCM plate is manufactured from prepreg, using the direct compression-moulding method. In this method, the prepared reinforcing package is placed inside a mould, heated, and then exposed to compaction pressure. The examined technology can be used for positioning FOSS between the layers of the composite material. Fibre-optic sensors, interacting with the material of the examined object, make it possible to register the evolution of the strain process during all stages of polymer-composite formation. FOSS data were recorded with interrogator ASTRO X 327. The obtained data were processed using specially developed algorithms.
Sensitivity Enhancement of FBG-Based Strain Sensor.
Li, Ruiya; Chen, Yiyang; Tan, Yuegang; Zhou, Zude; Li, Tianliang; Mao, Jian
2018-05-17
A novel fiber Bragg grating (FBG)-based strain sensor with a high-sensitivity is presented in this paper. The proposed FBG-based strain sensor enhances sensitivity by pasting the FBG on a substrate with a lever structure. This typical mechanical configuration mechanically amplifies the strain of the FBG to enhance overall sensitivity. As this mechanical configuration has a high stiffness, the proposed sensor can achieve a high resonant frequency and a wide dynamic working range. The sensing principle is presented, and the corresponding theoretical model is derived and validated. Experimental results demonstrate that the developed FBG-based strain sensor achieves an enhanced strain sensitivity of 6.2 pm/με, which is consistent with the theoretical analysis result. The strain sensitivity of the developed sensor is 5.2 times of the strain sensitivity of a bare fiber Bragg grating strain sensor. The dynamic characteristics of this sensor are investigated through the finite element method (FEM) and experimental tests. The developed sensor exhibits an excellent strain-sensitivity-enhancing property in a wide frequency range. The proposed high-sensitivity FBG-based strain sensor can be used for small-amplitude micro-strain measurement in harsh industrial environments.
Sensitivity Enhancement of FBG-Based Strain Sensor
Chen, Yiyang; Tan, Yuegang; Zhou, Zude; Mao, Jian
2018-01-01
A novel fiber Bragg grating (FBG)-based strain sensor with a high-sensitivity is presented in this paper. The proposed FBG-based strain sensor enhances sensitivity by pasting the FBG on a substrate with a lever structure. This typical mechanical configuration mechanically amplifies the strain of the FBG to enhance overall sensitivity. As this mechanical configuration has a high stiffness, the proposed sensor can achieve a high resonant frequency and a wide dynamic working range. The sensing principle is presented, and the corresponding theoretical model is derived and validated. Experimental results demonstrate that the developed FBG-based strain sensor achieves an enhanced strain sensitivity of 6.2 pm/με, which is consistent with the theoretical analysis result. The strain sensitivity of the developed sensor is 5.2 times of the strain sensitivity of a bare fiber Bragg grating strain sensor. The dynamic characteristics of this sensor are investigated through the finite element method (FEM) and experimental tests. The developed sensor exhibits an excellent strain-sensitivity-enhancing property in a wide frequency range. The proposed high-sensitivity FBG-based strain sensor can be used for small-amplitude micro-strain measurement in harsh industrial environments. PMID:29772826
Gangaiah, Dharanesh
2016-01-01
Background Haemophilus ducreyi has emerged as a major cause of cutaneous ulcers (CU) in yaws-endemic regions of the tropics in the South Pacific, South East Asia and Africa. H. ducreyi was once thought only to cause the genital ulcer (GU) disease chancroid; GU strains belong to 2 distinct classes, class I and class II. Using whole-genome sequencing of 4 CU strains from Samoa, 1 from Vanuatu and 1 from Papua New Guinea, we showed that CU strains diverged from the class I strain 35000HP and that one CU strain expressed β-lactamase. Recently, the Center for Disease Control and Prevention released the genomes of 11 additional CU strains from Vanuatu and Ghana; however, the evolutionary relationship of these CU strains to previously-characterized CU and GU strains is unknown. Methodology/Principal Findings We performed phylogenetic analysis of 17 CU and 10 GU strains. Class I and class II GU strains formed two distinct clades. The class I strains formed two subclades, one containing 35000HP and HD183 and the other containing the remainder of the class I strains. Twelve of the CU strains formed a subclone under the class I 35000HP subclade, while 2 CU strains formed a subclone under the other class I subclade. Unexpectedly, 3 of the CU strains formed a subclone under the class II clade. Phylogenetic analysis of dsrA-hgbA-ncaA sequences yielded a tree similar to that of whole-genome phylogenetic tree. Conclusions/Significance CU strains diverged from multiple lineages within both class I and class II GU strains. Multilocus sequence typing of dsrA-hgbA-ncaA could be reliably used for epidemiological investigation of CU and GU strains. As class II strains grow relatively poorly and are relatively more susceptible to vancomycin than class I strains, these findings have implications for methods to recover CU strains. Comparison of contemporary CU and GU isolates would help clarify the relationship between these entities. PMID:28027326
Gangaiah, Dharanesh; Spinola, Stanley M
2016-12-01
Haemophilus ducreyi has emerged as a major cause of cutaneous ulcers (CU) in yaws-endemic regions of the tropics in the South Pacific, South East Asia and Africa. H. ducreyi was once thought only to cause the genital ulcer (GU) disease chancroid; GU strains belong to 2 distinct classes, class I and class II. Using whole-genome sequencing of 4 CU strains from Samoa, 1 from Vanuatu and 1 from Papua New Guinea, we showed that CU strains diverged from the class I strain 35000HP and that one CU strain expressed β-lactamase. Recently, the Center for Disease Control and Prevention released the genomes of 11 additional CU strains from Vanuatu and Ghana; however, the evolutionary relationship of these CU strains to previously-characterized CU and GU strains is unknown. We performed phylogenetic analysis of 17 CU and 10 GU strains. Class I and class II GU strains formed two distinct clades. The class I strains formed two subclades, one containing 35000HP and HD183 and the other containing the remainder of the class I strains. Twelve of the CU strains formed a subclone under the class I 35000HP subclade, while 2 CU strains formed a subclone under the other class I subclade. Unexpectedly, 3 of the CU strains formed a subclone under the class II clade. Phylogenetic analysis of dsrA-hgbA-ncaA sequences yielded a tree similar to that of whole-genome phylogenetic tree. CU strains diverged from multiple lineages within both class I and class II GU strains. Multilocus sequence typing of dsrA-hgbA-ncaA could be reliably used for epidemiological investigation of CU and GU strains. As class II strains grow relatively poorly and are relatively more susceptible to vancomycin than class I strains, these findings have implications for methods to recover CU strains. Comparison of contemporary CU and GU isolates would help clarify the relationship between these entities.
Truu, Jaak; Heinaru, Eeva; Talpsep, Ene; Heinaru, Ain
2002-01-01
The oil-shale industry has created serious pollution problems in northeastern Estonia. Untreated, phenol-rich leachate from semi-coke mounds formed as a by-product of oil-shale processing is discharged into the Baltic Sea via channels and rivers. An exploratory analysis of water chemical and microbiological data sets from the low-flow period was carried out using different multivariate analysis techniques. Principal component analysis allowed us to distinguish different locations in the river system. The riverine microbial community response to water chemical parameters was assessed by co-inertia analysis. Water pH, COD and total nitrogen were negatively related to the number of biodegradative bacteria, while oxygen concentration promoted the abundance of these bacteria. The results demonstrate the utility of multivariate statistical techniques as tools for estimating the magnitude and extent of pollution based on river water chemical and microbiological parameters. An evaluation of river chemical and microbiological data suggests that the ambient natural attenuation mechanisms only partly eliminate pollutants from river water, and that a sufficient reduction of more recalcitrant compounds could be achieved through the reduction of wastewater discharge from the oil-shale chemical industry into the rivers.
Vibo, R; Kõrv, J; Roose, M
2007-04-01
The aim of the current study was to evaluate the outcome at 1 year following a first-ever stroke based on a population-based registry from 2001 to 2003 in Tartu, Estonia. The outcome of first-ever stroke was assessed in 433 patients by stroke risk factors, demographic data and stroke severity at onset using the Barthel Index (BI) score and the modified Rankin Score (mRS) at seventh day, 6 months and 1 year. Female sex, older age, blood glucose value >10 mmol/l on admission and more severe stroke on admission were the best predictors of dependency 1 year following the first-ever stroke. At 1 year, the percentage of functionally dependent patients was 20% and the survival rate was 56%. The use of antihypertensive/antithrombotic medication prior to stroke did not significantly affect the outcome. The survival rate of stroke patients in Tartu is lower compared with other studied populations. The outcome of stroke was mainly determined by the initial severity of stroke and by elevated blood glucose value on admission. Patients with untreated hypertension had more severe stroke and trend for unfavourable outcome compared with those who were on treatment.
Klein, Günter
2011-07-01
Bacillus cereus var. toyoi strain NCIMB 40112 (Toyocerin), a probiotic authorized in the European Union as feed additive for swine, bovines, poultry, and rabbits, was characterized by DNA fingerprinting applying pulsed-field gel electrophoresis and multilocus sequence typing and was compared with reference strains (of clinical and environmental origins). The probiotic strain was clearly characterized by pulsed-field gel electrophoresis using the restriction enzymes Apa I and Sma I resulting in unique DNA patterns. The comparison to the clinical reference strain B. cereus DSM 4312 was done with the same restriction enzymes, and again a clear differentiation of the two strains was possible by the resulting DNA patterns. The use of the restriction enzymes Apa I and Sma I is recommended for further studies. Furthermore, multilocus sequence typing analysis revealed a sequence type (ST 111) that was different from all known STs of B. cereus strains from food poisoning incidents. Thus, a strain characterization and differentiation from food poisoning strains for the probiotic strain was possible. Copyright ©, International Association for Food Protection
Hao, Shijie; Cui, Lishan; Wang, Hua; ...
2016-02-10
Crystals held at ultrahigh elastic strains and stresses may exhibit exceptional physical and chemical properties. Individual metallic nanowires can sustain ultra-large elastic strains of 4-7%. However, retaining elastic strains of such magnitude in kilogram-scale nanowires is challenging. Here, we find that under active load, ~5.6% elastic strain can be achieved in Nb nanowires in a composite material. Moreover, large tensile (2.8%) and compressive (-2.4%) elastic strains can be retained in kilogram-scale Nb nanowires when the composite is unloaded to a free-standing condition. It is then demonstrated that the retained tensile elastic strains of Nb nanowires significantly increase their superconducting transitionmore » temperature and critical magnetic fields, corroborating ab initio calculations based on BCS theory. This free-standing nanocomposite design paradigm opens new avenues for retaining ultra-large elastic strains in great quantities of nanowires and elastic-strain-engineering at industrial scale.« less
Optical Fibers Would Sense Local Strains
NASA Technical Reports Server (NTRS)
Egalon, Claudio O.; Rogowski, Robert S.
1994-01-01
Proposed fiber-optic transducers measure local strains. Includes lead-in and lead-out lengths producing no changes in phase shifts, plus short sensing length in which phase shift is sensitive to strain. Phase shifts in single-mode fibers vary with strains. In alternative version, multiple portions of optical fiber sensitive to strains characteristic of specific vibrational mode of object. Same principle also used with two-mode fiber.
NASA Astrophysics Data System (ADS)
Wang, Kuiru; Wang, Bo; Yan, Binbin; Sang, Xinzhu; Yuan, Jinhui; Peng, Gang-Ding
2013-10-01
We present a fiber Bragg grating Fabry-Perot (FBG-FP) sensor using the fast Fourier transform (FFT) demodulation for measuring the absolute strain and differential strain simultaneously. The amplitude and phase characteristics of Fourier transform spectrum have been studied. The relation between the amplitude of Fourier spectrum and the differential strain has been presented. We fabricate the fiber grating FP cavity sensor, and carry out the experiment on the measurement of absolute strain and differential strain. Experimental results verify the demodulation method, and show that this sensor has a good accuracy in the scope of measurement. The demodulating method can expand the number of multiplexed sensors combining with wavelength division multiplexing and time division multiplexing.
Code of Federal Regulations, 2013 CFR
2013-07-01
... strain QST 713 variant soil; exemption from the requirement of a tolerance. 180.1209 Section 180.1209... strain QST 713 and strain QST 713 variant soil; exemption from the requirement of a tolerance. An... Bacillus subtilis strain QST 713 and strain QST 713 variant soil when used in or on all food commodities...
Code of Federal Regulations, 2014 CFR
2014-07-01
... strain QST 713 variant soil; exemption from the requirement of a tolerance. 180.1209 Section 180.1209... strain QST 713 and strain QST 713 variant soil; exemption from the requirement of a tolerance. An... Bacillus subtilis strain QST 713 and strain QST 713 variant soil when used in or on all food commodities...
Strain gage system evaluation program
NASA Technical Reports Server (NTRS)
Dolleris, G. W.; Mazur, H. J.; Kokoszka, E., Jr.
1978-01-01
A program was conducted to determine the reliability of various strain gage systems when applied to rotating compressor blades in an aircraft gas turbine engine. A survey of current technology strain gage systems was conducted to provide a basis for selecting candidate systems for evaluation. Testing and evaluation was conducted in an F 100 engine. Sixty strain gage systems of seven different designs were installed on the first and third stages of an F 100 engine fan. Nineteen strain gage failures occurred during 62 hours of engine operation, for a survival rate of 68 percent. Of the failures, 16 occurred at blade-to-disk leadwire jumps (84 percent), two at a leadwire splice (11 percent), and one at a gage splice (5 percent). Effects of erosion, temperature, G-loading, and stress levels are discussed. Results of a post-test analysis of the individual components of each strain gage system are presented.
Anjaneya, O; Souche, S Yogesh; Santoshkumar, M; Karegoudar, T B
2011-06-15
Two different bacterial strains capable of decolorizing a highly water soluble azo dye Metanil Yellow were isolated from dye contaminated soil sample collected from Atul Dyeing Industry, Bellary, India. The individual bacterial strains Bacillus sp. AK1 and Lysinibacillus sp. AK2 decolorized Metanil Yellow (200 mg L(-1)) completely within 27 and 12h respectively. Various parameters like pH, temperature, NaCl and initial dye concentrations were optimized to develop an economically feasible decolorization process. The maximum concentration of Metanil Yellow (1000 mg L(-1)) was decolorized by strains AK2 and AK1 within 78 and 84 h respectively. These strains could decolorize Metanil Yellow over a broad pH range 5.5-9.0; the optimum pH was 7.2. The decolorization of Metanil Yellow was most efficient at 40°C and confirmed by UV-visible spectroscopy, TLC, HPLC and GC/MS analysis. Further, both the strains showed the involvement of azoreductase in the decolorization process. Phytotoxicity studies of catabolic products of Metanil Yellow on the seeds of chick pea and pigeon pea revealed much reduction in the toxicity of metabolites as compared to the parent dye. These results indicating the effectiveness of strains AK1 and AK2 for the treatment of textile effluents containing azo dyes. Copyright © 2011 Elsevier B.V. All rights reserved.
Probing the prodigious strain fringes from Lourdes
NASA Astrophysics Data System (ADS)
Aerden, Domingo G. A. M.; Sayab, Mohammad
2017-12-01
We investigate the kinematics of classic sigmoidal strain fringes from Lourdes (France) and review previous genetic models, strain methods and strain rates for these microstructures. Displacement controlled quartz and calcite fibers within the fringes yield an average strain of 195% with the technique of Ramsay and Huber (1983). This agrees well with strains measured from boudinaged pyrite layers and calcite veins in the same rocks, but conflicts with ca. ∼675% strain in previous analogue models for the studied strain fringes produced by progressive simple shear. We show that the detailed geometry and orientation of fiber patterns are insufficiently explained by simple shear but imply two successive, differently oriented strain fields. Although all strain fringes have the same overall asymmetry, considerable morphological variation resulted from different amounts of rotation of pyrite grains and fringes. Minor rotation led to sharply kinked fibers that record a ca. 70° rotation of the kinematic frame. Larger (up to 145°) rotations, accommodated by antithetic sliding on pyrite-fringe contacts, produced more strongly and smoothly curved fibers. Combined with published Rb-Sr ages for the studied microstructures, our new strain data indicate an average strain rate of 1.41 10-15 s-1 during ca. 37 Myr. continuous growth.
Coudeyras, Sophie; Marchandin, Hélène; Fajon, Céline; Forestier, Christiane
2008-01-01
Lactobacilli are lactic acid bacteria that are widespread in the environment, including the human diet and gastrointestinal tract. Some Lactobacillus strains are regarded as probiotics because they exhibit beneficial health effects on their host. In this study, the long-used probiotic strain Lactobacillus rhamnosus 35 was characterized at a molecular level and compared with seven reference strains from the Lactobacillus casei group. Analysis of rrn operon sequences confirmed that L. rhamnosus 35 indeed belongs to the L. rhamnosus species, and both temporal temperature gradient gel electrophoresis and ribotyping showed that it is closer to the probiotic strain L. rhamnosus ATCC 53103 (also known as L. rhamnosus GG) than to the species type strain. In addition, L. casei ATCC 334 gathered in a coherent cluster with L. paracasei type strains, unlike L. casei ATCC 393, which was closer to L. zeae; this is evidence of the lack of relatedness between the two L. casei strains. Further characterization of the eight strains by pulsed-field gel electrophoresis repetitive DNA element-based PCR identified distinct patterns for each strain, whereas two isolates of L. rhamnosus 35 sampled 40 years apart could not be distinguished. By subtractive hybridization using the L. rhamnosus GG genome as a driver, we were able to isolate five L. rhamnosus 35-specific sequences, including two phage-related ones. The primer pairs designed to amplify these five regions allowed us to develop rapid and highly specific PCR-based identification methods for the probiotic strain L. rhamnosus 35. PMID:18326671
High temperature static strain measurement with an electrical resistance strain gage
NASA Technical Reports Server (NTRS)
Lei, Jih-Fen
1992-01-01
An electrical resistance strain gage that can supply accurate static strain measurement for NASP application is being developed both in thin film and fine wire forms. This gage is designed to compensate for temperature effects on substrate materials with a wide range of thermal expansion coefficients. Some experimental results of the wire gage tested on one of the NASP structure materials, i.e., titanium matrix composites, are presented.
Brucella abortus Strain 2308 Wisconsin Genome: Importance of the Definition of Reference Strains
Suárez-Esquivel, Marcela; Ruiz-Villalobos, Nazareth; Castillo-Zeledón, Amanda; Jiménez-Rojas, César; Roop II, R. Martin; Comerci, Diego J.; Barquero-Calvo, Elías; Chacón-Díaz, Carlos; Caswell, Clayton C.; Baker, Kate S.; Chaves-Olarte, Esteban; Thomson, Nicholas R.; Moreno, Edgardo; Letesson, Jean J.; De Bolle, Xavier; Guzmán-Verri, Caterina
2016-01-01
Brucellosis is a bacterial infectious disease affecting a wide range of mammals and a neglected zoonosis caused by species of the genetically homogenous genus Brucella. As in most studies on bacterial diseases, research in brucellosis is carried out by using reference strains as canonical models to understand the mechanisms underlying host pathogen interactions. We performed whole genome sequencing analysis of the reference strain B. abortus 2308 routinely used in our laboratory, including manual curated annotation accessible as an editable version through a link at https://en.wikipedia.org/wiki/Brucella#Genomics. Comparison of this genome with two publically available 2308 genomes showed significant differences, particularly indels related to insertional elements, suggesting variability related to the transposition of these elements within the same strain. Considering the outcome of high resolution genomic techniques in the bacteriology field, the conventional concept of strain definition needs to be revised. PMID:27746773
Zhan, Xiao-Yong; Hu, Chao-Hui; Zhu, Qing-Yi
2016-04-01
Virulence genes are distinct regions of DNA which are present in the genome of pathogenic bacteria and absent in nonpathogenic strains of the same or related species. Virulence genes are frequently associated with bacterial pathogenicity in genus Legionella. In the present study, an assay was performed to detect ten virulence genes, including iraA, iraB, lvrA, lvrB, lvhD, cpxR, cpxA, dotA, icmC and icmD in different pathogenicity islands of 47 Legionella reference strains, 235 environmental strains isolated from water, and 4 clinical strains isolated from the lung tissue of pneumonia patients. The distribution frequencies of these genes in reference or/and environmental L. pneumophila strains were much higher than those in reference non-L. pneumophila or/and environmental non-L. pneumophila strains, respectively. L. pneumophila clinical strains also maintained higher frequencies of these genes compared to four other types of Legionella strains. Distribution frequencies of these genes in reference L. pneumophila strains were similar to those in environmental L. pneumophila strains. In contrast, environmental non-L. pneumophila maintained higher frequencies of these genes compared to those found in reference non-L. pneumophila strains. This study illustrates the association of virulence genes with Legionella pathogenicity and reveals the possible virulence evolution of non-L. pneumophia strains isolated from environmental water.
Strains and Sprains Are a Pain
... for Educators Search English Español Strains and Sprains Are a Pain KidsHealth / For Kids / Strains and Sprains ... sports. Let's find out more about them. What Are Strains and Sprains? Muscles contract and relax (almost ...
Determination of Dynamic Recrystallization Process by Equivalent Strain
NASA Astrophysics Data System (ADS)
Qin, Xiaomei; Deng, Wei
Based on Tpнoвckiй's displacement field, equivalent strain expression was derived. And according to the dynamic recrystallization (DRX) critical strain, DRX process was determined by equivalent strain. It was found that equivalent strain distribution in deformed specimen is inhomogeneous, and it increases with increasing true strain. Under a certain true strain, equivalent strains at the center, demisemi radius or on tangential plane just below the surface of the specimen are higher than the true strain. Thus, micrographs at those positions can not exactly reflect the true microstructures under the certain true strain. With increasing strain rate, the initial and finish time of DRX decrease. The frozen microstructures of 20Mn23AlV steel with the experimental condition validate the feasibility of predicting DRX process by equivalent strain.
Chitinase producing Bt strains
Haim B. Gunner; Matthew Zimet; Sarah Berger
1985-01-01
Screening of 402 strains of more than 18 varieties of Bacillus thuringiensis showed chitinase to be inducible in virtually every serovar tested. Though the chitinase titre varied among strains, there was a strong correlation between enhanced lethality to spruce budworm, Choristoneura fumiferana (Clemens), and an increase in...
Specific identification of Bacillus anthracis strains
NASA Astrophysics Data System (ADS)
Krishnamurthy, Thaiya; Deshpande, Samir; Hewel, Johannes; Liu, Hongbin; Wick, Charles H.; Yates, John R., III
2007-01-01
Accurate identification of human pathogens is the initial vital step in treating the civilian terrorism victims and military personnel afflicted in biological threat situations. We have applied a powerful multi-dimensional protein identification technology (MudPIT) along with newly generated software termed Profiler to identify the sequences of specific proteins observed for few strains of Bacillus anthracis, a human pathogen. Software termed Profiler was created to initially screen the MudPIT data of B. anthracis strains and establish the observed proteins specific for its strains. A database was also generated using Profiler containing marker proteins of B. anthracis and its strains, which in turn could be used for detecting the organism and its corresponding strains in samples. Analysis of the unknowns by our methodology, combining MudPIT and Profiler, led to the accurate identification of the anthracis strains present in samples. Thus, a new approach for the identification of B. anthracis strains in unknown samples, based on the molecular mass and sequences of marker proteins, has been ascertained.
Job strain and male fertility.
Hjollund, Niels Henrik I; Bonde, Jens Peter E; Henriksen, Tine Brink; Giwercman, Aleksander; Olsen, Jørn
2004-01-01
Job strain, defined as high job demands and low job control, has not previously been explored as a possible determinant of male fertility. We collected prospective data on job strain among men, and describe the associations with semen quality and probability of conceiving a clinical pregnancy during a menstrual cycle. Danish couples (N = 399) who were trying to become pregnant for the first time were followed for up to 6 menstrual periods. All men collected semen samples, and a blood sample was drawn from both partners. Job demand and job control were measured by a self-administered questionnaire at entry, and in each cycle the participants recorded changes in job control or job demand during the previous 30 days. In adjusted analyses, no associations were found between any semen characteristic or sexual hormones and any job strain variable. The odds for pregnancy were not associated with job strain. Psychologic job strain encountered in normal jobs in Denmark does not seem to affect male reproductive function.
NASA Astrophysics Data System (ADS)
Khademolhosseini, F.; Liu, C.-C.; Lim, C. J.; Chiao, M.
2016-08-01
Commercially available cell strain tools, such as pneumatically actuated elastomer substrates, require special culture plates, pumps, and incubator setups. In this work, we present a magnetically actuated cellular strain assessment tool (MACSAT) that can be implemented using off-the-shelf components and conventional incubators. We determine the strain field on the MACSAT elastomer substrate using numerical models and experimental measurements and show that a specific region of the elastomer substrate undergoes a quasi-uniaxial 2D stretch, and that cells confined to this region of the MACSAT elastomer substrate undergo tensile, compressive, or zero axial strain depending on their angle of orientation. Using the MACSAT to apply cyclic strain on endothelial cells, we demonstrate that actin filaments within the cells reorient away from the stretching direction, towards the directions of minimum axial strain. We show that the final actin orientation angles in strained cells are spread over a region of compressive axial strain, confirming previous findings on the existence of a varied pre-tension in the actin filaments of the cytoskeleton. We also demonstrate that strained cells exhibit distinctly different values of actin alignment coherency compared to unstrained cells and therefore propose that this parameter, i.e., the coherency of actin alignment, can be used as a new readout to determine the occurrence/extent of actin alignment in cell strain experiments. The tools and methods demonstrated in this study are simple and accessible and can be easily replicated by other researchers to study the strain response of other adherent cells.
Altering thermal transport by strained-layer epitaxy
NASA Astrophysics Data System (ADS)
Majdi, Tahereh; Pal, Souvik; Hafreager, Anders; Murad, Sohail; Sahu, Rakesh P.; Puri, Ishwar K.
2018-05-01
Since strain changes the interatomic spacing of matter and alters electron and phonon dispersion, an applied strain can modify the thermal conductivity k of a material. We show how the strain induced by heteroepitaxy is a passive mechanism to change k in a thin film. Molecular dynamics simulations of the deposition and epitaxial growth of ZnTe thin films provide insights into the role of interfacial strain in the conductivity of a deposited film. ZnTe films grow strain-free on lattice-matched ZnTe substrates, but similar thin films grown on a lattice-mismatched CdTe substrate exhibit ˜6% biaxial in-plane tensile strain and ˜7% uniaxial out-of-plane compressive strain. In the T = 700 K-1100 K temperature range, the conductivities of strained ZnTe layers decrease to ˜60% of their unstrained values. The resulting understanding of dk/dT shows that strain engineering can be used to alter the performance of a thermal rectifier and also provides a framework for enhancing thermoelectric devices.
NASA Technical Reports Server (NTRS)
Rand, J. L.
1981-01-01
Previous attempts to develop an appropriate sensor for measuring the stress or strain of high altitude balloons during flight are reviewed as well as the various conditions that must be met by such a device. The design, development and calibration of a transducer which promises to satisfy the necessary design constraints are described. The thin film strain transducer has a low effective modulus so as not to interfere with the strain that would naturally occur in the balloon. In addition, the transducer has a high sensitivity to longitudinal strain (7.216 mV/V/unit strain) which is constant for all temperature from room temperature to -80 C and all strains from 5 percent compression to 10 percent tensile strain. At the same time, the sensor is relatively insensitive (0.27 percent) to transverse forces. The device has a standard 350 ohm impedance which is compatible with available bridge balance, amplification and telemetry instrumentation now available for balloon flight. Recommendations are included for improved coatings to provide passive thermal control as well as model, tethered and full scale flight testing.
Thick film wireless and powerless strain sensor
NASA Astrophysics Data System (ADS)
Jia, Yi; Sun, Ke
2006-03-01
The development of an innovative wireless strain sensing technology has a great potential to extend its applications in manufacturing, civil engineering and aerospace industry. This paper presents a novel wireless and powerless strain sensor with a multi-layer thick film structure. The sensor employs a planar inductor (L) and capacitive transducer (C) resonant tank sensing circuit, and a strain sensitive material of a polarized polyvinylidene fluoride (PVDF) piezoelectric thick film to realize the wireless strain sensing by strain to frequency conversion and to receive radio frequency electromagnetic energy for powering the sensor. The prototype sensor was designed and fabricated. The results of calibration on a strain constant cantilever beam show a great linearity and sensitivity about 0.0013 in a strain range of 0-0.018.
Strains and Stressors: An Analysis of Touchscreen Learning in Genetically Diverse Mouse Strains
Graybeal, Carolyn; Bachu, Munisa; Mozhui, Khyobeni; Saksida, Lisa M.; Bussey, Timothy J.; Sagalyn, Erica; Williams, Robert W.; Holmes, Andrew
2014-01-01
Touchscreen-based systems are growing in popularity as a tractable, translational approach for studying learning and cognition in rodents. However, while mouse strains are well known to differ in learning across various settings, performance variation between strains in touchscreen learning has not been well described. The selection of appropriate genetic strains and backgrounds is critical to the design of touchscreen-based studies and provides a basis for elucidating genetic factors moderating behavior. Here we provide a quantitative foundation for visual discrimination and reversal learning using touchscreen assays across a total of 35 genotypes. We found significant differences in operant performance and learning, including faster reversal learning in DBA/2J compared to C57BL/6J mice. We then assessed DBA/2J and C57BL/6J for differential sensitivity to an environmental insult by testing for alterations in reversal learning following exposure to repeated swim stress. Stress facilitated reversal learning (selectively during the late stage of reversal) in C57BL/6J, but did not affect learning in DBA/2J. To dissect genetic factors underlying these differences, we phenotyped a family of 27 BXD strains generated by crossing C57BL/6J and DBA/2J. There was marked variation in discrimination, reversal and extinction learning across the BXD strains, suggesting this task may be useful for identifying underlying genetic differences. Moreover, different measures of touchscreen learning were only modestly correlated in the BXD strains, indicating that these processes are comparatively independent at both genetic and phenotypic levels. Finally, we examined the behavioral structure of learning via principal component analysis of the current data, plus an archival dataset, totaling 765 mice. This revealed 5 independent factors suggestive of “reversal learning,” “motivation-related late reversal learning,” “discrimination learning,” “speed to respond,” and
Strains and stressors: an analysis of touchscreen learning in genetically diverse mouse strains.
Graybeal, Carolyn; Bachu, Munisa; Mozhui, Khyobeni; Saksida, Lisa M; Bussey, Timothy J; Sagalyn, Erica; Williams, Robert W; Holmes, Andrew
2014-01-01
Touchscreen-based systems are growing in popularity as a tractable, translational approach for studying learning and cognition in rodents. However, while mouse strains are well known to differ in learning across various settings, performance variation between strains in touchscreen learning has not been well described. The selection of appropriate genetic strains and backgrounds is critical to the design of touchscreen-based studies and provides a basis for elucidating genetic factors moderating behavior. Here we provide a quantitative foundation for visual discrimination and reversal learning using touchscreen assays across a total of 35 genotypes. We found significant differences in operant performance and learning, including faster reversal learning in DBA/2J compared to C57BL/6J mice. We then assessed DBA/2J and C57BL/6J for differential sensitivity to an environmental insult by testing for alterations in reversal learning following exposure to repeated swim stress. Stress facilitated reversal learning (selectively during the late stage of reversal) in C57BL/6J, but did not affect learning in DBA/2J. To dissect genetic factors underlying these differences, we phenotyped a family of 27 BXD strains generated by crossing C57BL/6J and DBA/2J. There was marked variation in discrimination, reversal and extinction learning across the BXD strains, suggesting this task may be useful for identifying underlying genetic differences. Moreover, different measures of touchscreen learning were only modestly correlated in the BXD strains, indicating that these processes are comparatively independent at both genetic and phenotypic levels. Finally, we examined the behavioral structure of learning via principal component analysis of the current data, plus an archival dataset, totaling 765 mice. This revealed 5 independent factors suggestive of "reversal learning," "motivation-related late reversal learning," "discrimination learning," "speed to respond," and "motivation during
... the first 3 days. After 3 days, either heat or ice may be helpful if you still have pain. Rest the pulled muscle for at least a day. If possible, keep the pulled muscle raised above your heart. Try not to use a strained muscle while ...
Ezeronye, O U; Legras, J-L
2009-05-01
To study the yeast diversity of Nigerian palm wines by comparison with other African strains. Twenty-three Saccharomyces cerevisiae strains were obtained from palm wine samples collected at four locations in eastern Nigeria, and characterized using different molecular techniques: internal transcribed spacer restriction fragment length polymorphism and sequence analysis, pulsed field gel electrophoresis, inter delta typing and microsatellite multilocus analysis. These techniques revealed that palm wine yeasts represent a group of closely related strains that includes other West African isolates (CBS400, NCYC110, DVPG6044). Population analysis revealed an excess of homozygote strains and an allelic richness similar to wine suggestive of local domestication. Several other African yeast strains were not connected to this group. Ghana sorghum beer strains and other African strains (DBVPG1853 and MUCL28071) displayed strikingly high relatedness with European bread, beer or wine strains, and the genome of strain MUCL30909 contained African and wine-type alleles, indicating its hybrid origin. Nigerian palm wine yeast represents a local specific yeast flora, whereas a European origin or hybrid was suspected for several other Africa isolates. This study presents the first genetic characterization of an autochthonous African palm wine yeast population and confirms the idea that human intervention has favoured yeast migration.
Mak, Susanna; Van Spall, Harriette G C; Wainstein, Rodrigo V; Sasson, Zion
2012-03-01
The aim of this study was to examine the effect of heart rate (HR) on indices of deformation in adults with and without heart failure (HF) who underwent simultaneous high-fidelity catheterization of the left ventricle to describe the force-frequency relationship. Right atrial pacing to control HR and high-fidelity recordings of left ventricular (LV) pressure were used to inscribe the force-frequency relationship. Simultaneous two-dimensional echocardiographic imaging was acquired for speckle-tracking analysis. Thirteen patients with normal LV function and 12 with systolic HF (LV ejection fraction, 31 ± 13%) were studied. Patients with HF had depressed isovolumic contractility and impaired longitudinal strain and strain rate. HR-dependent increases in LV+dP/dt(max), the force-frequency relationship, was demonstrated in both groups (normal LV function, baseline to 100 beats/min: 1,335 ± 296 to 1,564 ± 320 mm Hg/sec, P < .0001; HF, baseline to 100 beats/min: 970 ± 207 to 1,083 ± 233 mm Hg/sec, P < .01). Longitudinal strain decreased significantly (normal LV function, baseline to 100 beats/min: 18.0 ± 3.5% to 10.8 ± 6.0%, P < .001; HF: 9.4 ± 4.1% to 7.5 ± 3.4%, P < .01). The decrease in longitudinal strain was related to a decrease in LV end-diastolic dimensions. Strain rate did not change with right atrial pacing. Despite the inotropic effect of increasing HR, longitudinal strain decreases in parallel with stroke volume as load-dependent indices of ejection. Strain rate did not reflect the modest HR-related changes in contractility; on the other hand, the use of strain rate for quantitative stress imaging is also less likely to be confounded by chronotropic responses. Copyright © 2012 American Society of Echocardiography. Published by Mosby, Inc. All rights reserved.
Johannson, Annika; Vorobjov, Sigrid; Heimer, Robert; Dovidio, John F; Uusküla, Anneli
2017-04-01
Disclosure of injecting drug use and its associations with stigma have received very little research attention. This cross-sectional study examined the role of internalized HIV and drug stigma (i.e., self-stigmatization) in the disclosure of injecting drug use among people who inject drugs (PWID) self-reporting as HIV-positive (n = 312) in Kohtla-Järve, Estonia. The internalization of both stigmas was relatively high. On average, PWID disclosed to three disclosure targets out of seven. Disclosure was highest to close friends and health care workers and lowest to employers and casual sex partners. Internalized drug stigma was negatively associated with disclosure to other family members (AOR = 0.48; 95% CI 0.30-0.77) and health care workers (AOR = 0.46; 95% CI 0.25-0.87). Internalized HIV stigma was positively associated with disclosure to health care workers (AOR = 2.26; 95% CI 1.27-4.00). No interaction effect of internalized stigmas on disclosures emerged. We concluded that effects of internalized stigmas on disclosures are few and not uniform.
Nanoscale strain mapping in battery nanostructures
NASA Astrophysics Data System (ADS)
Ulvestad, A.; Cho, H. M.; Harder, R.; Kim, J. W.; Dietze, S. H.; Fohtung, E.; Meng, Y. S.; Shpyrko, O. G.
2014-02-01
Coherent x-ray diffraction imaging is used to map the local three dimensional strain inhomogeneity and electron density distribution of two individual LiNi0.5Mn1.5O4-δ cathode nanoparticles in both ex-situ and in-situ environments. Our reconstructed images revealed a maximum strain of 0.4%. We observed different variations in strain inhomogeneity due to multiple competing effects. The compressive/tensile component of the strain is connected to the local lithium content and, on the surface, interpreted in terms of a local Jahn-Teller distortion of Mn3+. Finally, the measured strain distributions are discussed in terms of their impact on competing theoretical models of the lithiation process.
Biochemical Characterization of Prion Strains in Bank Voles
Pirisinu, Laura; Marcon, Stefano; Di Bari, Michele Angelo; D’Agostino, Claudia; Agrimi, Umberto; Nonno, Romolo
2013-01-01
Prions exist as different strains exhibiting distinct disease phenotypes. Currently, the identification of prion strains is still based on biological strain typing in rodents. However, it has been shown that prion strains may be associated with distinct PrPSc biochemical types. Taking advantage of the availability of several prion strains adapted to a novel rodent model, the bank vole, we investigated if any prion strain was actually associated with distinctive PrPSc biochemical characteristics and if it was possible to univocally identify strains through PrPSc biochemical phenotypes. We selected six different vole-adapted strains (three human-derived and three animal-derived) and analyzed PrPSc from individual voles by epitope mapping of protease resistant core of PrPSc (PrPres) and by conformational stability and solubility assay. Overall, we discriminated five out of six prion strains, while two different scrapie strains showed identical PrPSc types. Our results suggest that the biochemical strain typing approach here proposed was highly discriminative, although by itself it did not allow us to identify all prion strains analyzed. PMID:25437201
Strain effects on oxygen migration in perovskites.
Mayeshiba, Tam; Morgan, Dane
2015-01-28
Fast oxygen transport materials are necessary for a range of technologies, including efficient and cost-effective solid oxide fuel cells, gas separation membranes, oxygen sensors, chemical looping devices, and memristors. Strain is often proposed as a method to enhance the performance of oxygen transport materials, but the magnitude of its effect and its underlying mechanisms are not well-understood, particularly in the widely-used perovskite-structured oxygen conductors. This work reports on an ab initio prediction of strain effects on migration energetics for nine perovskite systems of the form LaBO3, where B = [Sc, Ti, V, Cr, Mn, Fe, Co, Ni, Ga]. Biaxial strain, as might be easily produced in epitaxial systems, is predicted to lead to approximately linear changes in migration energy. We find that tensile biaxial strain reduces the oxygen vacancy migration barrier across the systems studied by an average of 66 meV per percent strain for a single selected hop, with a low of 36 and a high of 89 meV decrease in migration barrier per percent strain across all systems. The estimated range for the change in migration barrier within each system is ±25 meV per percent strain when considering all hops. These results suggest that strain can significantly impact transport in these materials, e.g., a 2% tensile strain can increase the diffusion coefficient by about three orders of magnitude at 300 K (one order of magnitude at 500 °C or 773 K) for one of the most strain-responsive materials calculated here (LaCrO3). We show that a simple elasticity model, which assumes only dilative or compressive strain in a cubic environment and a fixed migration volume, can qualitatively but not quantitatively model the strain dependence of the migration energy, suggesting that factors not captured by continuum elasticity play a significant role in the strain response.
Nanocomposite Strain Gauges Having Small TCRs
NASA Technical Reports Server (NTRS)
Gregory, Otto; Chen, Ximing
2009-01-01
Ceramic strain gauges in which the strain-sensitive electrically conductive strips made from nanocomposites of noble metal and indium tin oxide (ITO) are being developed for use in gas turbine engines and other power-generation systems in which gas temperatures can exceed 1,500 F (about 816 C). In general, strain gauges exhibit spurious thermally induced components of response denoted apparent strain. When temperature varies, a strain-gauge material that has a nonzero temperature coefficient of resistance (TCR) exhibits an undesired change in electrical resistance that can be mistaken for the change in resistance caused by a change in strain. It would be desirable to formulate straingauge materials having TCRs as small as possible so as to minimize apparent strain. Most metals exhibit positive TCRs, while most semiconductors, including ITO, exhibit negative TCRs. The present development is based on the idea of using the negative TCR of ITO to counter the positive TCRs of noble metals and of obtaining the benefit of the ability of both ITO and noble metals to endure high temperatures. The noble metal used in this development thus far has been platinum. Combinatorial libraries of many ceramic strain gauges containing nanocomposites of various proportions of ITO and platinum were fabricated by reactive co-sputtering from ITO and platinum targets onto alumina- and zirconia-based substrates mounted at various positions between the targets.
Two-Dimensional Laser-Speckle Surface-Strain Gauge
NASA Technical Reports Server (NTRS)
Barranger, John P.; Lant, Christian
1992-01-01
Extension of Yamaguchi's laser-speckle surface-strain-gauge method yields data on two-dimensional surface strains in times as short as fractions of second. Laser beams probe rough spot on surface of specimen before and after processing. Changes in speckle pattern of laser light reflected from spot indicative of changes in surface strains during processing. Used to monitor strains and changes in strains induced by hot-forming and subsequent cooling of steel.
Sadkowska-Todys, M
2000-01-01
The aims of these studies were: genetic characteristic of street rabies virus strains isolated from different animal species in Poland and determination of phylogenetic relationships to reference laboratory strains of the street rabies viruses belonging to genotype 1 and 5. The variability of rabies isolates and their phylogenetic relationship were studied by comparing the nucleotide sequence of the virus genome fragment. The Polish strains of genotype 1 belong to four phylogenetic groups (NE, CE, NEE, EE) corresponding to four variants: fox-racoon dog (F-RD); European fox 1 (F1); European fox 2 (F2) and European fox 3 (F3). On the Polish territories there are no rabies strains representing the variant dog-wolf and typical for arctic fox variant. The similarity of nucleotide and amino acid sequences of street rabies strains belonging to genotype 1 and laboratory strain CVS is very high. It is about 91% similarity at nucleotide level and 95% at amino acid level. Rabies strain CVS is similar to genotype 5 bat strains (EBL 1) only in about 69% and 74% at nucleotide and amino acid level, respectively. The genetic divergence of rabies strains circulating in Poland raised the need of permanent epidemiological and virological surveillance. The genotype and variant of isolated strains should be determined (using PCR and RLFP methods).
Ultra High Strain Rate Nanoindentation Testing.
Sudharshan Phani, Pardhasaradhi; Oliver, Warren Carl
2017-06-17
Strain rate dependence of indentation hardness has been widely used to study time-dependent plasticity. However, the currently available techniques limit the range of strain rates that can be achieved during indentation testing. Recent advances in electronics have enabled nanomechanical measurements with very low noise levels (sub nanometer) at fast time constants (20 µs) and high data acquisition rates (100 KHz). These capabilities open the doors for a wide range of ultra-fast nanomechanical testing, for instance, indentation testing at very high strain rates. With an accurate dynamic model and an instrument with fast time constants, step load tests can be performed which enable access to indentation strain rates approaching ballistic levels (i.e., 4000 1/s). A novel indentation based testing technique involving a combination of step load and constant load and hold tests that enables measurement of strain rate dependence of hardness spanning over seven orders of magnitude in strain rate is presented. A simple analysis is used to calculate the equivalent uniaxial response from indentation data and compared to the conventional uniaxial data for commercial purity aluminum. Excellent agreement is found between the indentation and uniaxial data over several orders of magnitude of strain rate.
2009-01-01
Background The Lactic Acid Bacteria (LAB) are important components of the healthy gut flora and have been used extensively as probiotics. Understanding the cultivable diversity of LAB before and after probiotic administration, and being able to track the fate of administered probiotic isolates during feeding are important parameters to consider in the design of clinical trials to assess probiotic efficacy. Several methods may be used to identify bacteria at the strain level, however, PCR-based methods such as Random Amplified Polymorphic DNA (RAPD) are particularly suited to rapid analysis. We examined the cultivable diversity of LAB in the human gut before and after feeding with two Lactobacillus strains, and also tracked the fate of these two administered strains using a RAPD technique. Results A RAPD typing scheme was developed to genetically type LAB isolates from a wide range of species, and optimised for direct application to bacterial colony growth. A high-throughput strategy for fingerprinting the cultivable diversity of human faeces was developed and used to determine: (i) the initial cultivable LAB strain diversity in the human gut, and (ii) the fate of two Lactobacillus strains (Lactobacillus salivarius NCIMB 30211 and Lactobacillus acidophilus NCIMB 30156) contained within a capsule that was administered in a small-scale human feeding study. The L. salivarius strain was not cultivated from the faeces of any of the 12 volunteers prior to capsule administration, but appeared post-feeding in four. Strains matching the L. acidophilus NCIMB 30156 feeding strain were found in the faeces of three volunteers prior to consumption; after taking the Lactobacillus capsule, 10 of the 12 volunteers were culture positive for this strain. The appearance of both Lactobacillus strains during capsule consumption was statistically significant (p < 0.05). Conclusion We have shown that genetic strain typing of the cultivable human gut microbiota can be evaluated using a high
Strain-induced three-photon effects
NASA Astrophysics Data System (ADS)
Jeong, Jae-Woo; Shin, Sung-Chul; Lyubchanskii, I. L.; Varyukhin, V. N.
2000-11-01
Strain-induced three-photon effects such as optical second-harmonic generation and hyper-Rayleigh light scattering, characterized by electromagnetic radiation at the double frequency of an incident light, are phenomenologically investigated by adopting a nonlinear photoelastic interaction. The relations between the strain and the nonlinear optical susceptibility for crystal surfaces with point symmetries of 4mm and 3m are described by a symmetry analysis of the nonlinear photoelastic tensor. We theoretically demonstrate a possibility of determining the strain components by measuring the rotational anisotropy of radiation at the second-harmonic frequency. Hyper-Rayleigh light scattering by dislocation strain is also described using a nonlinear photoelastic tensor. The angular dependencies of light scattered at the double frequency of an incident light for different scattering geometries are analyzed.
AN ORGANOTYPIC UNIAXIAL STRAIN MODEL USING MICROFLUIDICS
Dollé, Jean-Pierre; Morrison, Barclay; Schloss, Rene R.; Yarmush, Martin L.
2012-01-01
Traumatic brain injuries are the leading cause of disability each year in the US. The most common and devastating consequence is the stretching of axons caused by shear deformation that occurs during rotational acceleration of the brain during injury. The injury effects on axonal molecular and functional events are not fully characterized. We have developed a strain injury model that maintains the three dimensional cell architecture and neuronal networks found in vivo with the ability to visualize individual axons and their response to a mechanical injury. The advantage of this model is that it can apply uniaxial strains to axons that make functional connections between two organotypic slices and injury responses can be observed in real-time and over long term. This uniaxial strain model was designed to be capable of applying an array of mechanical strains at various rates of strain, thus replicating a range of modes of axonal injury. Long term culture, preservation of slice and cell orientation, and slice-slice connection on the device was demonstrated. The device has the ability to strain either individual axons or bundles of axons through the control of microchannel dimensions. The fidelity of the model was verified by observing characteristic responses to various strain injuries which included axonal beading, delayed elastic effects and breakdown in microtubules. Microtubule breakdown was shown to be dependent on the degree of the applied strain field, where maximal breakdown was observed at peak strain and minimal breakdown is observed at low strain. This strain injury model could be a powerful tool in assessing strain injury effects on functional axonal connections. PMID:23233120
Optical fiber sensor technique for strain measurement
Butler, Michael A.; Ginley, David S.
1989-01-01
Laser light from a common source is split and conveyed through two similar optical fibers and emitted at their respective ends to form an interference pattern, one of the optical fibers having a portion thereof subjected to a strain. Changes in the strain cause changes in the optical path length of the strain fiber, and generate corresponding changes in the interference pattern. The interference pattern is received and transduced into signals representative of fringe shifts corresponding to changes in the strain experienced by the strained one of the optical fibers. These signals are then processed to evaluate strain as a function of time, typical examples of the application of the apparatus including electrodeposition of a metallic film on a conductive surface provided on the outside of the optical fiber being strained, so that strains generated in the optical fiber during the course of the electrodeposition are measurable as a function of time. In one aspect of the invention, signals relating to the fringe shift are stored for subsequent processing and analysis, whereas in another aspect of the invention the signals are processed for real-time display of the strain changes under study.
NASA Astrophysics Data System (ADS)
Naruse, Hiroshi; Tateda, Mitsuhiro; Ohno, Hiroshige; Shimada, Akiyoshi
2002-12-01
We theoretically derive the shape of the Brillouin gain spectrum, that is, the Brillouin backscattered-light power spectrum, produced in an optical fiber under conditions of a strain distribution that changes linearly with a constant slope. The modeled measurement system is an optical time-domain reflectometer-type strain sensor system. The linear strain distribution is one of the fundamental distributions and is produced in, for example, a beam to which a concentrated load is applied. By analyzing a function that expresses the shape of the derived Brillouin gain spectrum, we show that the strain calculated from the frequency at which the spectrum has a peak value coincides with that at the center of the effective pulsed light. In addition, the peak value and the full width at half-maximum of the Brillouin gain spectrum are both influenced by the strain difference between the two ends of the effective pulse. We investigate this influence in detail and obtain the relationship between strain difference and strain measurement error.
Liang, Chen; Ma, Yun; Gao, Can; Zhang, Jianhong; Yang, Min; Chen, Gen; Fu, Shan; Zhu, Tiangang
2017-02-01
The aim of this study was to investigate the change in myocardial strain in swimming athletes before and after high-intensity exercise using two-dimensional strain echocardiography (2DSE) technology. To assess whether the local and overall myocardial function and myocardial injury are accurately measured using 2DSE technology, 15 swimming athletes were selected as research objects. We applied 2DSE technology to track the 2D ultrasound images of the apical four chambers, the apical two chambers, and the apical long axis before and after high-intensity, increasing-load exercise. We recorded indices such as the left ventricular global strain (GS) and the left ventricular segmental wall longitudinal peak systolic strain (PS) in 18 systoles and analyzed the myocardial strain change before and after exercise. After high-intensity exercise, the overall myocardial strain decreased, especially the strain of the posterior wall, posterior divider, lateral wall, lower wall, and the basal and middle segments of the anterior wall. The influence of exercise on myocardial strain was greater on the basal and middle segments than on the apical segment. One-time intensive exercise negatively affected the myocardial muscle. Myocardial muscles in the apical segment and the myocardial wall were more sensitive to intensive exercise. The 2DSE technology can precisely position the motion-sensitive areas and help locate myocardial injury. © 2017, Wiley Periodicals, Inc.
Strain engineering of van der Waals heterostructures.
Vermeulen, Paul A; Mulder, Jefta; Momand, Jamo; Kooi, Bart J
2018-01-18
Modifying the strain state of solids allows control over a plethora of functional properties. The weak interlayer bonding in van der Waals (vdWaals) materials such as graphene, hBN, MoS 2 , and Bi 2 Te 3 might seem to exclude strain engineering, since strain would immediately relax at the vdWaals interfaces. Here we present direct observations of the contrary by showing growth of vdWaals heterostructures with persistent in-plane strains up to 5% and we show that strain relaxation follows a not yet reported process distinctly different from strain relaxation in three-dimensionally bonded (3D) materials. For this, 2D bonded Bi 2 Te 3 -Sb 2 Te 3 and 2D/3D bonded Bi 2 Te 3 -GeTe multilayered films are grown using Pulsed Laser Deposition (PLD) and their structure is monitored in situ using Reflective High Energy Electron Diffraction (RHEED) and post situ analysis is performed using Transmission Electron Microscopy (TEM). Strain relaxation is modeled and found to solely depend on the layer being grown and its initial strain. This insight demonstrates that strain engineering of 2D bonded heterostructures obeys different rules than hold for epitaxial 3D materials and opens the door to precise tuning of the strain state of the individual layers to optimize functional performance of vdWaals heterostructures.
Roosaare, Märt; Vaher, Mihkel; Kaplinski, Lauris; Möls, Märt; Andreson, Reidar; Lepamets, Maarja; Kõressaar, Triinu; Naaber, Paul; Kõljalg, Siiri; Remm, Maido
2017-01-01
Fast, accurate and high-throughput identification of bacterial isolates is in great demand. The present work was conducted to investigate the possibility of identifying isolates from unassembled next-generation sequencing reads using custom-made guide trees. A tool named StrainSeeker was developed that constructs a list of specific k -mers for each node of any given Newick-format tree and enables the identification of bacterial isolates in 1-2 min. It uses a novel algorithm, which analyses the observed and expected fractions of node-specific k -mers to test the presence of each node in the sample. This allows StrainSeeker to determine where the isolate branches off the guide tree and assign it to a clade whereas other tools assign each read to a reference genome. Using a dataset of 100 Escherichia coli isolates, we demonstrate that StrainSeeker can predict the clades of E. coli with 92% accuracy and correct tree branch assignment with 98% accuracy. Twenty-five thousand Illumina HiSeq reads are sufficient for identification of the strain. StrainSeeker is a software program that identifies bacterial isolates by assigning them to nodes or leaves of a custom-made guide tree. StrainSeeker's web interface and pre-computed guide trees are available at http://bioinfo.ut.ee/strainseeker. Source code is stored at GitHub: https://github.com/bioinfo-ut/StrainSeeker.
Evans, J D; Leigh, S A
2008-09-01
Mycoplasma gallisepticum (MG) is an important avian pathogen causing significant economic losses within the poultry industry. In an effort to develop tools to aid in MG research and diagnostics, we have compared sequences of the attenuated MG vaccine strain ts-11 to those of commonly used pathogenic challenge strains in search of a simple means of differentiation. Via gapA sequence alignments and comparisons, we have identified and designed primers facilitating strain differentiation. When applied to conventional polymerase chain reaction (PCR) assay at low annealing temperature, the primer sets allow for the differentiation of MG attenuated vaccine strains ts-11 as well as the attenuated MG vaccine strain 6/85 from the commonly utilized MG challenge strains R(low), R, and S6. Conventional PCR differentiation is based on the visualization of sole products with the attenuated MG strains ts-11 and 6/85 and the lack of the corresponding products from MG strains R(low), R, and S6. When applied to MG strain F, product visualization varies with the applied primer set. The differentiation of MG strains ts-11 and 6/85 from the pathogenic challenge strains was also accomplished via real-time analyses, however, the primer sets were not able to differentiate MG strains ts-11 and 6/85 from selected MG field isolates.
2 CFR 176.90 - Non-application to acquisitions covered under international agreements.
Code of Federal Regulations, 2010 CFR
2010-01-01
..., Bulgaria, Canada, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hong Kong..., Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Latvia, Lithuania, Luxembourg...
NASA Astrophysics Data System (ADS)
Zhang, Chendong; Li, Ming-Yang; Tersoff, Jerry; Han, Yimo; Su, Yushan; Li, Lain-Jong; Muller, David A.; Shih, Chih-Kang
2018-02-01
Monolayer transition metal dichalcogenide heterojunctions, including vertical and lateral p-n junctions, have attracted considerable attention due to their potential applications in electronics and optoelectronics. Lattice-misfit strain in atomically abrupt lateral heterojunctions, such as WSe2-MoS2, offers a new band-engineering strategy for tailoring their electronic properties. However, this approach requires an understanding of the strain distribution and its effect on band alignment. Here, we study a WSe2-MoS2 lateral heterojunction using scanning tunnelling microscopy and image its moiré pattern to map the full two-dimensional strain tensor with high spatial resolution. Using scanning tunnelling spectroscopy, we measure both the strain and the band alignment of the WSe2-MoS2 lateral heterojunction. We find that the misfit strain induces type II to type I band alignment transformation. Scanning transmission electron microscopy reveals the dislocations at the interface that partially relieve the strain. Finally, we observe a distinctive electronic structure at the interface due to hetero-bonding.
Effect of Static Strains on Diffusion
NASA Technical Reports Server (NTRS)
Girifalco, L. A.; Grimes, H. H.
1961-01-01
A theory is developed that gives the diffusion coefficient in strained systems as an exponential function of the strain. This theory starts with the statistical theory of the atomic jump frequency as developed by Vineyard. The parameter determining the effect of strain on diffusion is related to the changes in the inter-atomic forces with strain. Comparison of the theory with published experimental results for the effect of pressure on diffusion shows that the experiments agree with the form of the theoretical equation in all cases within experimental error.
Luo, Runlan; Cui, Hongyan; Huang, Dongmei; Sun, Lihua; Song, Shengda; Sun, Mengyao; Li, Guangsen
2018-06-11
Right ventricular function is a crucial factor of the prognosis of systemic lupus erythematosus (SLE). To evaluate the right ventricular function in SLE patients with different degrees of pulmonary hypertension (PH) by strain and strain rate imaging. A total of 102 SLE patients and 30 healthy volunteers were studied between October 2015 and May 2016. Patients were divided into three groups according to pulmonary artery systolic pressure (PASP) estimated by echocardiography: group control (A); PASP ≤ 30 mmHg (group B, n = 37); PASP 30-50 mmHg (mild PH; group C, n = 34); and PASP ≥ 50 mmHg (moderate-to-severe PH; group D, n = 31). Longitudinal peak systolic strain (ε) and strain rate (SR), including systolic strain rate (SRs), early diastolic strain rate (SRe) and late diastolic strain rate (SRa) were measured in the basal, middle and apical segments of the right ventricular free wall in participants by two-dimensional speckle tracking echocardiography (2D-STE) from the apical four-chamber view. A p < 0.05 was set for statistical significance. The parameters of ε, SRs, SRe, and SRa were significantly decreased in groups C and D compared with groups A and B. The ε of each segments was significantly lower in group D than in group C, while there were no differences in SRs, SRe and SRa between groups C and D. Strain and strain rate imaging could early detect the right ventricular dysfunction in SLE patients with PH, and provide important value for clinical therapy and prognosis of these patients. (Arq Bras Cardiol. 2018; [online].ahead print, PP.0-0).
Effects of C and Si on strain aging of strain-based API X60 pipeline steels
NASA Astrophysics Data System (ADS)
Sung, Hyo Kyung; Lee, Dong Ho; Lee, Sunghak; Lee, Byeong-Joo; Hong, Seung-Pyo; Kim, Young-Woon; Yoo, Jang Yong; Hwang, Byoungchul; Shin, Sang Yong
2017-05-01
Four types of strain-based API X60 pipeline steels were fabricated by varying the C and Si contents, and the effects of C and Si on strain aging were investigated. The 0.05 wt% C steels consisted mainly of polygonal ferrite (PF), whereas the 0.08 wt% C steels consisted of acicular ferrite (AF). The volume fraction of AF increased with increasing C content because C is an austenite stabilizer element. The volume fractions of bainitic ferrite (BF) of the 0.15 wt% Si steels were higher than those of the 0.25 wt% Si steels, whereas the volume fractions of the secondary phases were lower. From the tensile properties before and after the aging process of the strainbased API X60 pipeline steels, the yield strength increased and the uniform and total elongation decreased, which is the strain aging effect. The strain aging effect in the strain-based API X60 pipeline steels was minimized when the volume fraction of AF was increased and secondary phases were distributed uniformly. On the other hand, an excessively high C content formed fine precipitates, and the strain aging effect occurred because of the interactions among dislocations and fine precipitates.
NASA Astrophysics Data System (ADS)
Sasaki, Daisuke; Anh, Le Duc; Nam Hai, Pham; Tanaka, Masaaki
2014-04-01
We systematically investigated the influence of strain on the electronic structure and ferromagnetism of (In,Fe)As thin films. It is found that while the shift of the critical point energies of compressive-strained (In,Fe)As layers grown on (In1-y,Gay)As (y = 0.05, 0.1) buffer layers can be explained by the hydrostatic deformation effect (HDE) alone, those of tensile-strained (In,Fe)As layers grown on (Ga1-z,Alz)Sb (z = 0, 0.5, 1) buffer layers can be explained by the combination of HDE and the quantum confinement effect (QCE). The Curie temperature TC of the (In,Fe)As layers strongly depends on the strain, and shows a maximum for the (In,Fe)As layer grown on a GaSb buffer layer. The strain dependence of TC can be explained by the s-d exchange mechanism taking into account HDE and QCE.
5-Fluorouracil-resistant strain of Methanobacterium thermoautotrophicum.
Nagle, D P; Teal, R; Eisenbraun, A
1987-09-01
Growth of Methanobacterium thermoautotrophicum Marburg is inhibited by the pyrimidine, 5-fluorouracil (FU). It was shown previously that methanogenesis is not inhibited to the same extent as growth. A spontaneously occurring FU-resistant strain (RTAE-1) was isolated from a culture of strain Marburg. The growth of both strains was inhibited by 5-fluorodeoxyuridine but not 5-fluorocytosine, and the wild type was more susceptible to inhibition by 5-azauracil and 6-azauracil than was strain RTAE-1. The cellular targets for the pyrimidine analogs are not known. When the accumulation of 14C-labeled uracil or FU by the two strains was compared, the wild type took up 15-fold more radiolabel per cell than did the FU-resistant strain. In the wild type, radiolabel from uracil was incorporated into the soluble pool, RNA, and DNA. The metabolism of uracil appeared to involve a uracil phosphoribosyltransferase activity. Strain Marburg extracts contained this enzyme, whereas FU-resistant strain RTAE-1 extracts had less than 1/10 as much activity. Although it is possible that a change in permeability to the compounds plays a role in the stable resistance of strain RTAE-1, the fact that it lacks the ability to metabolize pyrimidines to nucleotides is sufficient to account for its phenotype.
5-Fluorouracil-resistant strain of Methanobacterium thermoautotrophicum.
Nagle, D P; Teal, R; Eisenbraun, A
1987-01-01
Growth of Methanobacterium thermoautotrophicum Marburg is inhibited by the pyrimidine, 5-fluorouracil (FU). It was shown previously that methanogenesis is not inhibited to the same extent as growth. A spontaneously occurring FU-resistant strain (RTAE-1) was isolated from a culture of strain Marburg. The growth of both strains was inhibited by 5-fluorodeoxyuridine but not 5-fluorocytosine, and the wild type was more susceptible to inhibition by 5-azauracil and 6-azauracil than was strain RTAE-1. The cellular targets for the pyrimidine analogs are not known. When the accumulation of 14C-labeled uracil or FU by the two strains was compared, the wild type took up 15-fold more radiolabel per cell than did the FU-resistant strain. In the wild type, radiolabel from uracil was incorporated into the soluble pool, RNA, and DNA. The metabolism of uracil appeared to involve a uracil phosphoribosyltransferase activity. Strain Marburg extracts contained this enzyme, whereas FU-resistant strain RTAE-1 extracts had less than 1/10 as much activity. Although it is possible that a change in permeability to the compounds plays a role in the stable resistance of strain RTAE-1, the fact that it lacks the ability to metabolize pyrimidines to nucleotides is sufficient to account for its phenotype. PMID:3624203
Complete Genomic Sequences of H3N8 Equine Influenza Virus Strains Used as Vaccine Strains in Japan
Yamanaka, Takashi; Bannai, Hiroshi; Tsujimura, Koji; Kokado, Hiroshi
2018-01-01
ABSTRACT We sequenced the eight segments of influenza A virus strains A/equine/Ibaraki/1/2007 and A/equine/Yokohama/aq13/2010, which are strains of the Florida sublineage clades 1 and 2 of the H3N8 subtype equine influenza virus. These strains have been used as vaccine strains in Japan since 2016 in accordance with World Organization for Animal Health (OIE) recommendations. PMID:29567739
Complete Genomic Sequences of H3N8 Equine Influenza Virus Strains Used as Vaccine Strains in Japan.
Nemoto, Manabu; Yamanaka, Takashi; Bannai, Hiroshi; Tsujimura, Koji; Kokado, Hiroshi
2018-03-22
We sequenced the eight segments of influenza A virus strains A/equine/Ibaraki/1/2007 and A/equine/Yokohama/aq13/2010, which are strains of the Florida sublineage clades 1 and 2 of the H3N8 subtype equine influenza virus. These strains have been used as vaccine strains in Japan since 2016 in accordance with World Organization for Animal Health (OIE) recommendations. Copyright © 2018 Nemoto et al.
Harouni, Ahmed A.; Hossain, Jakir; Jacobs, Michael A.; Osman, Nael F.
2012-01-01
Introduction Early detection of breast lesions using mammography has resulted in lower mortality-rates. However, some breast lesions are mammography occult and magnetic resonance imaging (MRI) is recommended, but has lower specificity. It is possible to achieve higher specificity by using Strain-ENCoded (SENC) MRI and/or magnetic resonance elastography(MRE). SENC breast MRI can measure the strain properties of breast tissue. Similarly, MRE is used to measure elasticity (i.e., shear stiffness) of different tissue compositions interrogating the tissue mechanical properties. Reports have shown that malignant tumors are 3–13 times stiffer than normal tissue and benign tumors. Methods We have developed a Strain-ENCoded (SENC) breast hardware device capable of periodically compressing the breast, thus allowing for longer scanning time and measuring the strain characteristics of breast tissue. This hardware enabled us to use SENC MRI with high spatial resolution (1×1×5mm3) instead of Fast SENC(FSENC). Simple controls and multiple safety measures were added to ensure accurate, repeatable and safe in-vivo experiments. Results Phantom experiments showed that SENC breast MRI has higher SNR and CNR than FSENC under different scanning resolutions. Finally, the SENC breast device reproducibility measurements resulted in a difference of less than one mm with a 1% strain difference. Conclusion SENC breast MR images have higher SNR and CNR than FSENC images. Thus, combining SENC breast strain measurements with diagnostic breast MRI to differentiate benign from malignant lesions could potentially increase the specificity of diagnosis in the clinical setting. PMID:21440464
Finite Strain Behavior of Polyurea for a Wide Range of Strain Rates
2010-02-01
dimensional dynamic compressive behavior of EPDM rubber ," Journal of Engineering Materials and Technology, Transaction of the ASME, 125:294-301. [97] Song, B...and Chen, W. (2004) "Dynamic compressive behavior of EPDM rubber un- der nearly uniaxial strain conditions," Journal of Engineering Materials and... rubber elastic springs to describe the steep initial stiffness of virgin butadiene rubber under tensile and compressive loading at intermediate strain
Ignition Delay Associated with a Strained Strip
NASA Technical Reports Server (NTRS)
Gerk, T. J.; Karagozian, A. R.
1996-01-01
Ignition processes associated with two adjacent fuel-oxidizer interferences bounding a strained fuel strip are explored here using single-step activation energy asymptotics. Calculations are made for constant as well as temporally decaying strain fields. There possible models of ignition are determined: one in which the two interfaces ignite independently as diffusion flames; one in which the two interfaces ignite dependently and in which ignition occurs to form a single , premixed flame at very high strain rates before ignition is completely prevented. In contrast to a single, isolated interface in which ignition can be prevented by overmatching heat production with heat convection due to strain, ignition of a strained fuel strip can also be prevented if the finite extend of fuel is diluted by oxidizer more quickly than heat production can cause a positive feedback thermal runaway. These behaviors are dependent on the relative sizes of timescales associated with species and heat diffusion, with convection due to strain, and with the chemical reaction. The result here indicate that adjacent, strained species interfaces may ignite quite differently in nature from ignition of a single, strained intrface and that their interdependence should be considered as the interfaces are brought closer together in complex strain fields. Critical strain rates leading to complete ignition delay are found to be considerably smaller for the fuel strip than those for single interfaces as the fuel strip is made thin in comparison to diffusion and chemical length scales.
Modal strain energies in COSMIC NASTRAN
NASA Technical Reports Server (NTRS)
Snyder, B. D.; Venkayya, V. B.
1989-01-01
A computer program was developed to take a NASTRAN output file from a normal modes analysis and calculate the modal strain energies of selected elements. The FORTRAN program can determine the modal strain energies for CROD, CBAR, CELAS, CTRMEM, CQDMEM2, and CSHEAR elements. Modal strain energies are useful in estimating damping in structures.
Sato, Naoki; Seo, Genichiro; Benno, Yoshimi
2014-01-01
Strain-specific polymerase chain reaction (PCR) primers for detection of Bacillus mesentericus strain TO-A (BM TO-A) were developed. The randomly amplified polymorphic DNA (RAPD) technique was used to produce potential strain-specific markers. A 991-bp RAPD marker found to be strain-specific was sequenced, and two primer pairs specific to BM TO-A were constructed based on this sequence. In addition, we explored a more specific DNA region using inverse PCR, and designed a strain-specific primer set for use in real-time quantitative PCR (qPCR). These primer pairs were tested against 25 Bacillus subtilis strains and were found to be strain-specific. After examination of the detection limit and linearity of detection of BM TO-A in feces, the qPCR method and strain-specific primers were used to quantify BM TO-A in the feces of healthy volunteers who had ingested 3×10(8) colony forming unit (CFU) of BM TO-A per day in tablets. During the administration period, BM TO-A was detected in the feces of all 24 subjects, and the average number of BM TO-A detected using the culture method and qPCR was about 10(4.8) and 10(5.8) cells per gram of feces, respectively. Using the qPCR method, BM TO-A was detected in the feces of half of the subjects 3 d after withdrawal, and was detected in the feces of only one subject 1 week after withdrawal. These results suggest that the qPCR method using BM TO-A strain-specific primers is useful for the quantitative detection of this strain in feces.
Feng, Yan; Zhong, Shu-ling; Xu, Chang-ping; Lu, Yi-yu
2013-07-01
To investigate the variations on hemagglutinin (H) gene of measles virus (MV) in Zhejiang province, and to analyze the differences with strains circulated both at home and abroad. In total, 33 MV strains isolated in Zhejiang province between 1999 and 2011 were collected.RNA of the isolated MV strains was extracted and the complete sequences on H gene were amplified using RT-PCR assay. The products were compared with the Chinese vaccine strain Shanghai-191, which was downloaded from GenBank, and other 95 different MV strains from all over the world. 33 MV strains, isolated from the throat swab specimens collected from MV patients in Zhejiang province during 1999 to 2001, were used to conduct phylogenetic analysis with MV strains circulated in other areas of China during 1993 to 2007. The phylogenetic tree based on H gene sequences showed that all the Zhejiang MV strains located in H1a cluster, and no apparent time series and geographic restrictions were observed. Compared to the referenced vaccine strain Shanghai-191, the average variation rate on nucleotides and amino acids, and the evolutionary rate of H1a viruses from China during 2003 to 2011 were separately 5.15%, 4.44% and 5.81%, which were higher than the rates of H1a viruses during 1965 to 1993 (4.75%, 3.86% and 5.30%), and the rates of viruses during 1994 to 2002 (4.80%, 4.08% and 5.37%).However, the dn/ds ratios of strains within the three time periods were 0.19,0.21 and 0.23 respectively, which indicated that no evidence of positive selection was found on H1a MV strains during 1993 to 2011. A 24 stable amino acid variation sites on H gene was found between H1a viruses during 2003 to 2011 and the vaccine strain Shanghai-191. The largest variation occurred between vaccine and H1a strains, with 0.053 of the p-distance and 26-28 of amino acid mutations.However, only 15 stable amino acid variations were found between vaccine strain and genotype B3 or D4 strains.In addition, significant differences were found
Low TCR nanocomposite strain gages
NASA Technical Reports Server (NTRS)
Gregory, Otto J. (Inventor); Chen, Ximing (Inventor)
2012-01-01
A high temperature thin film strain gage sensor capable of functioning at temperatures above 1400.degree. C. The sensor contains a substrate, a nanocomposite film comprised of an indium tin oxide alloy, zinc oxide doped with alumina or other oxide semiconductor and a refractory metal selected from the group consisting of Pt, Pd, Rh, Ni, W, Ir, NiCrAlY and NiCoCrAlY deposited onto the substrate to form an active strain element. The strain element being responsive to an applied force.
NASA Astrophysics Data System (ADS)
Khalili, N.; Asif, H.; Naguib, H. E.
2018-05-01
Electrospun polymeric fibers can be used as strain sensors due to their large surface to weight/volume ratio, high porosity and pore interconnectivity. Large strain flexible strain sensors are used in numerous applications including rehabilitation, health monitoring, and sports performance monitoring where large strain detection should be accommodated by the sensor. This has boosted the demand for a stretchable, flexible and highly sensitive sensor able to detect a wide range of mechanically induced deformations. Herein, a physically cross-linked polylactic acid (PLA) and thermoplastic polyurethane (TPU) blend is made into nanofiber networks via electrospinning. The PLA/TPU weight ratio is optimized to obtain a maximum attainable strain of 100% while maintaining its mechanical integrity. The TPU/PLA fibers also allowed for their thermally activated recovery due to shape memory properties of the substrate. This novel feature enhances the sensor’s performance as it is no longer limited by its plastic deformation. Using spray coating method, a homogeneous layer of single-walled carbon nanotube is deposited onto the as-spun fiber mat to induce electrical conductivity to the surface of the fibers. It is shown that stretching and bending the sensor result in a highly sensitive and linear response with a maximum gauge factor of 33.
[Salmonella spp. strains resistant to drugs].
Białucha, Agata; Kozuszko, Sylwia; Gospodarek, Eugenia
2010-01-01
The aim of the study was retrospective analysis of Salmonella spp. strains isolated from patients of State Infectious Diseases Observatory Hospital of T. Browicz in Bydgoszcz (SZAK) and University of dr. A. Jurasz in Bydgoszcz (SU CM UMK) in 2006-2009. The percentages of Salmonella spp. strains resistant to at least one drug were: 19,0% in 2006, 12,5% in 2007, 50,6% in 2008 and 43,8% in the first half of 2009 year. The highest number of Salmonella spp. strains resistant to drugs were isolated from stool (96,7%) and from patients of SZAK (83,3%). Among all isolated Salmonella spp. strains resistant to drugs the highest percentage were S. enterica serovar Enteritidis (56,7%). Among S. enterica bacilli predominated resitant phenotypes to ampicillin, amoxicillin, chloramphenicol and nalidixic acid. The increasing number of strains resistant to ciprofloxacin (0,0 - 26,7%) and high percentage of strains resistant to nalidixic acid (97,3%) were noted. Decreasing resistance to chloramphenicol was observed in our study (54,5 - 14,3%).
A closer look at prion strains
Solforosi, Laura; Milani, Michela; Mancini, Nicasio; Clementi, Massimo; Burioni, Roberto
2013-01-01
Prions are infectious proteins that are responsible for transmissible spongiform encephalopathies (TSEs) and consist primarily of scrapie prion protein (PrPSc), a pathogenic isoform of the host-encoded cellular prion protein (PrPC). The absence of nucleic acids as essential components of the infectious prions is the most striking feature associated to these diseases. Additionally, different prion strains have been isolated from animal diseases despite the lack of DNA or RNA molecules. Mounting evidence suggests that prion-strain-specific features segregate with different PrPSc conformational and aggregation states. Strains are of practical relevance in prion diseases as they can drastically differ in many aspects, such as incubation period, PrPSc biochemical profile (e.g., electrophoretic mobility and glycoform ratio) and distribution of brain lesions. Importantly, such different features are maintained after inoculation of a prion strain into genetically identical hosts and are relatively stable across serial passages. This review focuses on the characterization of prion strains and on the wide range of important implications that the study of prion strains involves. PMID:23357828
1984-04-01
Applied Science Publications Ltd. (U.K.) "Strain Gauges, Kinds and Uses", H.K.P. Neubert . McMillan, London (U.K.) "A Strain Gauge Primer", Perry and...G.R. Paul (Materials) A.A. Baker (Materials) I.G. Powlesland G. Wright ." P. Ferrerotto J. Madej B. Ashcroft E.S. Moody M.T. Adams M. Cameron (GAF) (2
[The plasmid profile of Neisseria meningitidis strains].
Khetsuriani, K G; Namgaladze, M Z; Lomsadze, Kh V; Kakuberi, D R
1993-01-01
The distribution of plasmids in N. meningitidis strains according to their origin and serological groups has been studied. Plasmids have been discovered in N. meningitidis of all groups, plasmid-carrying strains constituting 55% of strains isolated from healthy carriers and 46.2% of strains isolated from patients. The molecular weight of N. meningitidis plasmid DNA varies from 2.9 MD to 95 MD.
Load cell having strain gauges of arbitrary location
Spletzer, Barry [Albuquerque, NM
2007-03-13
A load cell utilizes a plurality of strain gauges mounted upon the load cell body such that there are six independent load-strain relations. Load is determined by applying the inverse of a load-strain sensitivity matrix to a measured strain vector. The sensitivity matrix is determined by performing a multivariate regression technique on a set of known loads correlated to the resulting strains. Temperature compensation is achieved by configuring the strain gauges as co-located orthogonal pairs.
Scherer, W F; Chin, J
1983-07-01
In 1971, an unusual strain of Venezuelan encephalitis (VE) virus (71D1252) was recovered from the same small area of a rain forest in the western Amazon basin of South America near Iquitos, Loreto, Peru, from which strains of subtype I-D were recovered. The marker characteristics of this strain resembled most closely those of VE subtype III (Mucambo) and were distinctly different from coexisting I-D strains. Thus the concurrent presence of two different VE virus subtypes in one place was a striking exception to the usual geographic allopatry of VE virus subtypes. Strain 71D1252 also contained temperature sensitive (ts) (37 degrees C versus 39 degrees C) virions in the original mosquito suspension and first suckling mouse passage brain tissue suspensions. It thus represents one of the few so-far-reported ts strains of viruses found in nature, and the only natural ts strain of VE virus.
High-sensitivity strain visualization using electroluminescence technologies
NASA Astrophysics Data System (ADS)
Xu, Jian; Jo, Hongki
2016-04-01
Visualizing mechanical strain/stress changes is an emerging area in structural health monitoring. Several ways are available for strain change visualization through the color/brightness change of the materials subjected to the mechanical stresses, for example, using mechanoluminescence (ML) materials and mechanoresponsive polymers (MRP). However, these approaches were not effectively applicable for civil engineering system yet, due to insufficient sensitivity to low-level strain of typical civil structures and limitation in measuring both static and dynamic strain. In this study, design and validation for high-sensitivity strain visualization using electroluminescence technologies are presented. A high-sensitivity Wheatstone bridge, of which bridge balance is precisely controllable circuits, is used with a gain-adjustable amplifier. The monochrome electroluminescence (EL) technology is employed to convert both static and dynamic strain change into brightness/color change of the EL materials, through either brightness change mode (BCM) or color alternation mode (CAM). A prototype has been made and calibrated in lab, the linearity between strain and brightness change has been investigated.
Silicon strain gages bonded on stainless steel using glass frit for strain sensor applications
NASA Astrophysics Data System (ADS)
Zhang, Zongyang; Cheng, Xingguo; Leng, Yi; Cao, Gang; Liu, Sheng
2014-05-01
In this paper, a steel pressure sensor using strain gages bonded on a 17-4 PH stainless steel (SS) diaphragm based on glass frit technology is proposed. The strain gages with uniform resistance are obtained by growing an epi-silicon layer on a single crystal silicon wafer using epitaxial deposition technique. The inorganic glass frits are used as the bonding material between the strain gages and the 17-4 PH SS diaphragm. Our results show that the output performances of sensors at a high temperature of 125 °C are almost equal those at room temperature, which indicates that the glass frit bonding is a good method and may lead to a significant advance in the high temperature applicability of silicon strain gage sensors. Finally, the microstructure of the cured organic adhesive and the fired glass frit are compared. It may be concluded that the defects of the cured organic adhesive deteriorate the hysteresis and repeatability errors of the sensors.
2010-01-01
Background Discrimination between clinical and environmental strains within many bacterial species is currently underexplored. Genomic analyses have clearly shown the enormous variability in genome composition between different strains of a bacterial species. In this study we have used Legionella pneumophila, the causative agent of Legionnaire's disease, to search for genomic markers related to pathogenicity. During a large surveillance study in The Netherlands well-characterized patient-derived strains and environmental strains were collected. We have used a mixed-genome microarray to perform comparative-genome analysis of 257 strains from this collection. Results Microarray analysis indicated that 480 DNA markers (out of in total 3360 markers) showed clear variation in presence between individual strains and these were therefore selected for further analysis. Unsupervised statistical analysis of these markers showed the enormous genomic variation within the species but did not show any correlation with a pathogenic phenotype. We therefore used supervised statistical analysis to identify discriminating markers. Genetic programming was used both to identify predictive markers and to define their interrelationships. A model consisting of five markers was developed that together correctly predicted 100% of the clinical strains and 69% of the environmental strains. Conclusions A novel approach for identifying predictive markers enabling discrimination between clinical and environmental isolates of L. pneumophila is presented. Out of over 3000 possible markers, five were selected that together enabled correct prediction of all the clinical strains included in this study. This novel approach for identifying predictive markers can be applied to all bacterial species, allowing for better discrimination between strains well equipped to cause human disease and relatively harmless strains. PMID:20630115
Poliovirus strain characterization: a WHO Memorandum*
1980-01-01
Reliable laboratory techniques for the intratypic characterization of poliovirus types 1, 2, and 3 isolates have an important role in the epidemiological surveillance of poliomyelitis and in studies of the safety and efficacy of poliovirus vaccines. Of the techniques available for poliovirus strain characterization, those potentially most useful are intratypic serodifferentiation and the biochemical techniques. The value of strain-specific (absorbed) antisera for antigenic characterization of strains has been clearly established for the identification of both vaccine-like viruses and different epidemic wild strains. Single-radial-diffusion techniques appear to be promising and should be further explored. Biochemical techniques involving studies of both virus polypeptides and nucleic acids are also capable of providing valuable information for strain characterization. Biological and physico-chemical tests are generally of limited value but their application may be useful in certain circumstances. PMID:6170471
Skeletal muscle tensile strain dependence: hyperviscoelastic nonlinearity
Wheatley, Benjamin B; Morrow, Duane A; Odegard, Gregory M; Kaufman, Kenton R; Donahue, Tammy L Haut
2015-01-01
Introduction Computational modeling of skeletal muscle requires characterization at the tissue level. While most skeletal muscle studies focus on hyperelasticity, the goal of this study was to examine and model the nonlinear behavior of both time-independent and time-dependent properties of skeletal muscle as a function of strain. Materials and Methods Nine tibialis anterior muscles from New Zealand White rabbits were subject to five consecutive stress relaxation cycles of roughly 3% strain. Individual relaxation steps were fit with a three-term linear Prony series. Prony series coefficients and relaxation ratio were assessed for strain dependence using a general linear statistical model. A fully nonlinear constitutive model was employed to capture the strain dependence of both the viscoelastic and instantaneous components. Results Instantaneous modulus (p<0.0005) and mid-range relaxation (p<0.0005) increased significantly with strain level, while relaxation at longer time periods decreased with strain (p<0.0005). Time constants and overall relaxation ratio did not change with strain level (p>0.1). Additionally, the fully nonlinear hyperviscoelastic constitutive model provided an excellent fit to experimental data, while other models which included linear components failed to capture muscle function as accurately. Conclusions Material properties of skeletal muscle are strain-dependent at the tissue level. This strain dependence can be included in computational models of skeletal muscle performance with a fully nonlinear hyperviscoelastic model. PMID:26409235
The Security Concerns of the Baltic States as NATO Allies
2013-08-01
Defence Col- lege in Tartu, Estonia, the military higher college of Estonia, Latvia, and Lithuania. Dr. Corum was a pro - fessor at the U.S. Army...Estonia, along with Finland , became the most modern, literate, and advanced regions of the Old Russian Empire. A cultural revival in the 19th...States were part of Europe designated as the Soviet sphere of influence, along with Eastern Poland and parts of Romania and Finland . The Soviet
Superinfection Behaviors on Scale-Free Networks with Competing Strains
NASA Astrophysics Data System (ADS)
Wu, Qingchu; Small, Michael; Liu, Huaxiang
2013-02-01
This paper considers the epidemiology of two strains ( I, J) of a disease spreading through a population represented by a scale-free network. The epidemiological model is SIS and the two strains have different reproductive numbers. Superinfection means that strain I can infect individuals already infected with strain J, replacing the strain J infection. Individuals infected with strain I cannot be infected with strain J. The model is set up as a system of ordering differential equations and stability of the disease free, marginal strain I and strain J, and coexistence equilibria are assessed using linear stability analysis, supported by simulations. The main conclusion is that superinfection, as modeled in this paper, can allow strain I to coexist with strain J even when it has a lower basic reproductive number. Most strikingly, it can allow strain I to persist even when its reproductive number is less than 1.
Strain measurements in composite bolted-joint specimens
NASA Technical Reports Server (NTRS)
Hyer, M. W.; Lightfoot, M. C.; Perry, J. C.
1979-01-01
Strain data from a series of bolted joint tests is presented. Double lap, double hole, double lap, single hole, and open hole tensile specimens were tested and the strain gage locations, load strain responses, and load axial displacement responses are presented. The open hole specimens were gaged to determine strain concentration factors. The double lap, double hole specimens were gaged to determine the uniformity of the strain in the joint and the amount of load transferred past the first bolt. The measurements indicated roughly half the load passed the first bolt to be reacted by the second bolt.
Chen, Fangzhou; Knutson, Todd P; Porter, Robert E; Ciarlet, Max; Mor, Sunil Kumar; Marthaler, Douglas G
2017-12-01
Rotavirus G (RVG) strains have been detected in a variety of avian species, but RVG genomes have been published from only a single pigeon and two chicken strains. Two turkey RVG strains were identified and characterized, one in a hatchery with no reported health issues and the other in a hatchery with high embryo/poult mortality. The two turkey RVG strains shared only an 85.3 % nucleotide sequence identity in the VP7 gene while the other genes possessed high nucleotide identity among them (96.3-99.9 %). Low nucleotide percentage identities (31.6-87.3 %) occurred among the pigeon and chicken RVG strains. Interestingly, potential recombination events were detected between our RVG strains and a human RVB strain, in the VP6 and NSP3 segments. The epidemiology of RVG in avian flocks and the pathogenicity of the two different RVG strains should be further investigated to understand the ecology and impact of RVG in commercial poultry flocks.
Static Strain Aging Behavior of a Manganese-Silicon Steel After Single and Multi-stage Straining
NASA Astrophysics Data System (ADS)
Seraj, P.; Serajzadeh, S.
2016-03-01
In this work, static strain aging behavior of an alloy steel containing high amounts of silicon and manganese was examined while the influences of initial microstructure and pre-strain on the aging kinetics were evaluated as well. The rate of strain aging in a low carbon steel was also determined and compared with that occurred in the alloy steel. The rates of static strain aging in the steels were defined at room temperature and at 95 °C by means of double-hit tensile testing and hardness measurements. In addition, three-stage aging experiments at 80 °C were carried out to estimate aging behavior under multi-pass deformation processing. The results showed that in-solution manganese and silicon atoms could significantly affect the aging behavior of the steel and reduce the kinetics of static strain aging as compared to the low carbon steel. The initial microstructure also played an important role on the aging behavior. The rapidly cooled steel having mean ferrite grain size of 9.7 μm showed the least aging susceptibility index during the aging experiments. Accordingly, the activation energies for static strain aging were calculated as 93.2 and 85.7 kJ/mole for the alloy steel having fine and coarse ferrite-pearlite structures, respectively while it was computed as 79.1 kJ/mole for the low carbon steel with ferrite mean grain size of about 16.2 μm.
Hudspeth, M. K.; Gerardo, S. Hunt; Maiden, M. F. J.; Citron, D. M.; Goldstein, E. J. C.
1999-01-01
Bacteroides forsythus strains recovered from cat and dog bite wound infections in humans (n = 3), monkey oral strains (n = 3), and the human oral ATCC 43037 type strain were characterized by using phenotypic characteristics, enzymatic tests, whole cell fatty acid analysis, sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE) analysis, PCR fingerprinting, and 16S rDNA (genes coding for rRNA) sequencing. All three bite wound isolates grew on brucella agar supplemented with 5% sheep blood, vitamin K1, and hemin. These strains, unlike the ATCC strain and previously described monkey oral and human clinical strains, did not require N-acetylmuramic acid supplementation for growth as pure cultures. However, their phenotypic characteristics, except for catalase production, were similar to those of previously identified strains. PCR fingerprinting analysis showed differences in band patterns from the ATCC strain. Also, SDS-PAGE and whole cell fatty acid analysis indicated that the dog and cat bite wound strains were similar but not identical to the human B. forsythus ATCC 43037 type strain and the monkey oral strains. The rDNA sequence analysis indicated that the three bite wound isolates had 99.93% homology with each other and 98.9 and 99.22% homology with the human ATCC 43037 and monkey oral strains, respectively. These results suggest that there are host-specific variations within each group. PMID:10325363
Cahalin, Lawrence P
2009-01-01
Job strain is the psychological and physiological response to a lack of control or support in the work environment. It appears to be an important risk factor for continued employment throughout the lifespan. Reducing job strain earlier in a workers life has the potential to have substantial beneficial health effects throughout a workers life. Early screening for job strain should be implemented in known high risk or high strain jobs. This is particularly important since there a fewer younger workers entering the labor force and there will be a growing need for older workers to remain in the workforce. Furthermore, healthier workers will require less medical care and are likely to work longer if they are willing and able. Healthier older workers who are willing and able to work longer will defer receipt of retirement benefits while continuing to pay into the Social Security System. Further investigation of older individuals (1) willingness and motivation to work past the normal retirement age, (2) career and employment security, skills development, and reconciliation of working and non-working life, and (3) job strain and effects of reducing job strain is needed. The current job strain literature has been expanded to the Social Security System arena and suggests that reducing job strain has the potential to help eliminate the Social Security drain by increasing older worker labor force retention.
Bosi, Emanuele; Monk, Jonathan M.; Aziz, Ramy K.; Fondi, Marco; Nizet, Victor; Palsson, Bernhard Ø.
2016-01-01
Staphylococcus aureus is a preeminent bacterial pathogen capable of colonizing diverse ecological niches within its human host. We describe here the pangenome of S. aureus based on analysis of genome sequences from 64 strains of S. aureus spanning a range of ecological niches, host types, and antibiotic resistance profiles. Based on this set, S. aureus is expected to have an open pangenome composed of 7,411 genes and a core genome composed of 1,441 genes. Metabolism was highly conserved in this core genome; however, differences were identified in amino acid and nucleotide biosynthesis pathways between the strains. Genome-scale models (GEMs) of metabolism were constructed for the 64 strains of S. aureus. These GEMs enabled a systems approach to characterizing the core metabolic and panmetabolic capabilities of the S. aureus species. All models were predicted to be auxotrophic for the vitamins niacin (vitamin B3) and thiamin (vitamin B1), whereas strain-specific auxotrophies were predicted for riboflavin (vitamin B2), guanosine, leucine, methionine, and cysteine, among others. GEMs were used to systematically analyze growth capabilities in more than 300 different growth-supporting environments. The results identified metabolic capabilities linked to pathogenic traits and virulence acquisitions. Such traits can be used to differentiate strains responsible for mild vs. severe infections and preference for hosts (e.g., animals vs. humans). Genome-scale analysis of multiple strains of a species can thus be used to identify metabolic determinants of virulence and increase our understanding of why certain strains of this deadly pathogen have spread rapidly throughout the world. PMID:27286824
Step width alters iliotibial band strain during running.
Meardon, Stacey A; Campbell, Samuel; Derrick, Timothy R
2012-11-01
This study assessed the effect of step width during running on factors related to iliotibial band (ITB) syndrome. Three-dimensional (3D) kinematics and kinetics were recorded from 15 healthy recreational runners during overground running under various step width conditions (preferred and at least +/- 5% of their leg length). Strain and strain rate were estimated from a musculoskeletal model of the lower extremity. Greater ITB strain and strain rate were found in the narrower step width condition (p < 0.001, p = 0.040). ITB strain was significantly (p < 0.001) greater in the narrow condition than the preferred and wide conditions and it was greater in the preferred condition than the wide condition. ITB strain rate was significantly greater in the narrow condition than the wide condition (p = 0.020). Polynomial contrasts revealed a linear increase in both ITB strain and strain rate with decreasing step width. We conclude that relatively small decreases in step width can substantially increase ITB strain as well as strain rates. Increasing step width during running, especially in persons whose running style is characterized by a narrow step width, may be beneficial in the treatment and prevention of running-related ITB syndrome.
Influence of strain on dislocation core in silicon
NASA Astrophysics Data System (ADS)
Pizzagalli, L.; Godet, J.; Brochard, S.
2018-05-01
First principles, density functional-based tight binding and semi-empirical interatomic potentials calculations are performed to analyse the influence of large strains on the structure and stability of a 60? dislocation in silicon. Such strains typically arise during the mechanical testing of nanostructures like nanopillars or nanoparticles. We focus on bi-axial strains in the plane normal to the dislocation line. Our calculations surprisingly reveal that the dislocation core structure largely depends on the applied strain, for strain levels of about 5%. In the particular case of bi-axial compression, the transformation of the dislocation to a locally disordered configuration occurs for similar strain magnitudes. The formation of an opening, however, requires larger strains, of about 7.5%. Furthermore, our results suggest that electronic structure methods should be favoured to model dislocation cores in case of large strains whenever possible.
USDA-ARS?s Scientific Manuscript database
In the past decade recombinant strains of potato virus Y (PVY) have overtaken the ordinary strain, PVYO, as the predominant viruses affecting the US seed potato crop. Aphids may be a contributing factor in the emergence of the recombinant strains, but studies indicate that differences in transmissio...
Yang, Li-Juan; Weng, Ya-Kui; Zhang, Hui-Min; Dong, Shuai
2014-11-26
The compressive strain effect on the magnetic ground state and electronic structure of strained GdTiO3 has been studied using the first-principles method. Unlike the cases of congeneric YTiO3 and LaTiO3, both of which become the A-type antiferromagnetism on the (0 0 1) LaAlO3 substrate despite their contrastive magnetism, the ground state of strained GdTiO3 on the LaAlO3 substrate changes from the original ferromagnetism to a G-type antiferromagnetim, instead of the A-type one although Gd(3+) is between Y(3+) and La(3+). It is only when the in-plane compressive strain is large enough, e.g. on the (0 0 1) YAlO3 substrate, that the ground state finally becomes the A-type. The band structure calculation shows that the compressive strained GdTiO3 remains insulating, although the band gap changes a little in the strained GdTiO3.
Longitudinal and Circumferential Strain of the Proximal Aorta
Bell, Vanessa; Mitchell, William A.; Sigurðsson, Sigurður; Westenberg, Jos J. M.; Gotal, John D.; Torjesen, Alyssa A.; Aspelund, Thor; Launer, Lenore J.; de Roos, Albert; Gudnason, Vilmundur; Harris, Tamara B.; Mitchell, Gary F.
2014-01-01
Background Accurate assessment of mechanical properties of the proximal aorta is a requisite first step for elucidating the pathophysiology of isolated systolic hypertension. During systole, substantial proximal aortic axial displacement produces longitudinal strain, which we hypothesize causes variable underestimation of ascending aortic circumferential strain compared to values in the longitudinally constrained descending aorta. Methods and Results To assess effects of longitudinal strain, we performed magnetic resonance imaging in 375 participants (72 to 94 years old, 204 women) in the Age, Gene/Environment Susceptibility‐Reykjavik Study and measured aortic circumferential and longitudinal strain. Circumferential ascending aortic area strain uncorrected for longitudinal strain was comparable in women and men (mean [95% CI], 8.3 [7.8, 8.9] versus 7.9 [7.4, 8.5]%, respectively, P=0.3). However, longitudinal strain was greater in women (8.5±2.5 versus 7.0±2.5%, P<0.001), resulting in greater longitudinally corrected circumferential ascending aortic strain (14.4 [13.6, 15.2] versus 13.0 [12.4, 13.7]%, P=0.010). Observed circumferential descending aortic strain, which did not require correction (women: 14.0 [13.2, 14.8], men: 12.4 [11.6, 13.2]%, P=0.005), was larger than uncorrected (P<0.001), but comparable to longitudinally corrected (P=0.12) circumferential ascending aortic strain. Carotid‐femoral pulse wave velocity did not correlate with uncorrected ascending aortic strain (R=−0.04, P=0.5), but was inversely related to longitudinally corrected ascending and observed descending aortic strain (R=−0.15, P=0.004; R=−0.36, P<0.001, respectively). Longitudinal strain was also inversely related to carotid‐femoral pulse wave velocity and other risk factors for higher aortic stiffness including treated hypertension. Conclusions Longitudinal strain creates substantial and variable errors in circumferential ascending aortic area strain measurements
Taxonomy of oxalotrophic Methylobacterium strains.
Sahin, Nurettin; Kato, Yuko; Yilmaz, Ferah
2008-10-01
Most of the oxalotrophic bacteria are facultative methylotrophs and play important ecological roles in soil fertility and cycling of elements. This study gives a detailed picture of the taxonomy and diversity of these bacteria and provides new information about the taxonomical variability within the genus Methylobacterium. Twelve mesophilic, pink-pigmented, and facultatively methylotrophic oxalate-oxidizing strains were included in this work that had been previously isolated from the soil and some plant tissues by the potassium oxalate enrichment method. The isolates were characterized using biochemical tests, cellular lipid profiles, spectral characteristics of carotenoid pigments, G+C content of the DNA, and 16S rDNA sequencing. The taxonomic similarities among the strains were analyzed using the simple matching (S (SM)) and Jaccard (S (J)) coefficients, and the UPGMA clustering algorithm. The phylogenetic position of the strains was inferred by the neighbor-joining method on the basis of the 16S rDNA sequences. All isolates were Gram-negative, facultatively methylotrophic, oxidase and catalase positive, and required no growth factors. Based on the results of numerical taxonomy, the strains formed four closely related clusters sharing > or =85% similarity. Analysis of the 16S rDNA sequences demonstrated that oxalotrophic, pink-pigmented, and facultatively methylotrophic strains could be identified as members of the genus Methylobacterium. Except for M. variabile and M. aquaticum, all of the Methylobacterium type strains tested had the ability of oxalate utilization. Our results indicate that the capability of oxalate utilization seems to be an uncommon trait and could be used as a valuable taxonomic criterion for differentiation of Methylobacterium species.
Taxonomy of oxalotrophic Methylobacterium strains
NASA Astrophysics Data System (ADS)
Sahin, Nurettin; Kato, Yuko; Yilmaz, Ferah
2008-10-01
Most of the oxalotrophic bacteria are facultative methylotrophs and play important ecological roles in soil fertility and cycling of elements. This study gives a detailed picture of the taxonomy and diversity of these bacteria and provides new information about the taxonomical variability within the genus Methylobacterium. Twelve mesophilic, pink-pigmented, and facultatively methylotrophic oxalate-oxidizing strains were included in this work that had been previously isolated from the soil and some plant tissues by the potassium oxalate enrichment method. The isolates were characterized using biochemical tests, cellular lipid profiles, spectral characteristics of carotenoid pigments, G+C content of the DNA, and 16S rDNA sequencing. The taxonomic similarities among the strains were analyzed using the simple matching ( S SM) and Jaccard ( S J) coefficients, and the UPGMA clustering algorithm. The phylogenetic position of the strains was inferred by the neighbor-joining method on the basis of the 16S rDNA sequences. All isolates were Gram-negative, facultatively methylotrophic, oxidase and catalase positive, and required no growth factors. Based on the results of numerical taxonomy, the strains formed four closely related clusters sharing ≥85% similarity. Analysis of the 16S rDNA sequences demonstrated that oxalotrophic, pink-pigmented, and facultatively methylotrophic strains could be identified as members of the genus Methylobacterium. Except for M. variabile and M. aquaticum, all of the Methylobacterium type strains tested had the ability of oxalate utilization. Our results indicate that the capability of oxalate utilization seems to be an uncommon trait and could be used as a valuable taxonomic criterion for differentiation of Methylobacterium species.
Numerical modelling of strain in lava tubes
NASA Astrophysics Data System (ADS)
Merle, Olivier
The strain within lava tubes is described in terms of pipe flow. Strain is partitioned into three components: (a) two simple shear components acting from top to bottom and from side to side of a rectangular tube in transverse section; and (b) a pure shear component corresponding to vertical shortening in a deflating flow and horizontal compression in an inflating flow. The sense of shear of the two simple shear components is reversed on either side of a central zone of no shear. Results of numerical simulations of strain within lava tubes reveal a concentric pattern of flattening planes in section normal to the flow direction. The central node is a zone of low strain, which increases toward the lateral borders. Sections parallel to the flow show obliquity of the flattening plane to the flow axis, constituting an imbrication. The strain ellipsoid is generally of plane strain type, but can be of constriction or flattening type if thinning (i.e. deflating flow) or thickening (i.e. inflating flow) is superimposed on the simple shear regime. The strain pattern obtained from numerical simulation is then compared with several patterns recently described in natural lava flows. It is shown that the strain pattern revealed by AMS studies or crystal preferred orientations is remarkably similar to the numerical simulation. However, some departure from the model is found in AMS measurements. This may indicate inherited strain recorded during early stages of the flow or some limitation of the AMS technique.
Antonaccio, Olena; Smith, William R; Gostjev, Feodor A
2015-09-01
This study provides a new assessment of Merton's anomie/strain theory and fills in several gaps in the literature. First, using the data from the sample of adolescents in an especially suitable and interesting setting, post-Soviet Ukraine, it investigates the applicability of the theory to this context and reveals that predictive powers of anomic strain may be influenced by larger sociocultural environments. Second, it evaluates the possibility of theoretical elaboration of Merton's theory through identifying contingencies such as external constraints on behavior and finds limited support for moderating effects of perceptions of risks of sanctioning and social bonds on anomic strain-delinquency relationships. Finally, it confirms that additional clarifications of the concept of anomic strain may be promising. © The Author(s) 2014.
The many shades of prion strain adaptation.
Baskakov, Ilia V
2014-01-01
In several recent studies transmissible prion disease was induced in animals by inoculation with recombinant prion protein amyloid fibrils produced in vitro. Serial transmission of amyloid fibrils gave rise to a new class of prion strains of synthetic origin. Gradual transformation of disease phenotypes and PrP(Sc) properties was observed during serial transmission of synthetic prions, a process that resembled the phenomenon of prion strain adaptation. The current article discusses the remarkable parallels between phenomena of prion strain adaptation that accompanies cross-species transmission and the evolution of synthetic prions occurring within the same host. Two alternative mechanisms underlying prion strain adaptation and synthetic strain evolution are discussed. The current article highlights the complexity of the prion transmission barrier and strain adaptation and proposes that the phenomenon of prion adaptation is more common than previously thought.
Left atrial function: evaluation by strain analysis
Gan, Gary C. H.; Ferkh, Aaisha; Boyd, Anita
2018-01-01
The left atrium has an important role in modulating left ventricular filling and is an important biomarker of cardiovascular disease and adverse cardiovascular outcomes. While previously left atrial (LA) size was utilised, the role of LA function as a biomarker is increasingly being evaluated, both independently and also in combination with LA size. Strain analysis has been utilised for evaluation of LA function and can be measured throughout the cardiac cycle, thereby enabling the evaluation of LA reservoir, conduit and contractile function. Strain evaluates myocardial deformation while strain rate examines the rate of change in strain. This review will focus on the various types of strain analysis for evaluation of LA function, alterations in LA strain in physiological and pathologic states that alter LA function and finally evaluate its utility as a prognostic marker. PMID:29541609
ERIC Educational Resources Information Center
Mazerolle, Paul; Piquero, Alex R.; Capowich, George E.
2003-01-01
Explored whether relationships between strain, anger, and deviant outcomes varied when using trait- or situational-based measures of anger, noting whether people with higher trait anger had increased likelihood of experiencing strain, becoming angry from strain, and responding deviantly. Relying on trait-based static indicators of anger was…
Mérida, A; Flores, E; Florencio, F J
1992-01-01
The glnA gene from Synechocystis sp. strain PCC 6803 was cloned by hybridization with the glnA gene from Anabaena sp. strain PCC 7120, and a deletion-insertion mutation of the Synechocystis gene was generated in vitro. A strain derived from Synechocystis sp. strain PCC 6803 which contained integrated into the chromosome, in addition to its own glnA gene, the Anabaena glnA gene was constructed. From that strain, a Synechocystis sp. glnA mutant could be obtained by transformation with the inactivated Synechocystis glnA gene; this mutant grew by using Anabaena glutamine synthetase and was not a glutamine auxotroph. A Synechocystis sp. glnA mutant could not be obtained, however, from the wild-type Synechocystis sp. The Anabaena glutamine synthetase enzyme was subject to ammonium-promoted inactivation when expressed in the Synechocystis strain but not in the Anabaena strain itself. Images PMID:1345914
Second Generation Models for Strain-Based Design
DOT National Transportation Integrated Search
2011-08-30
This project covers the development of tensile strain design models which form a key part of the strain-based design of pipelines. The strain-based design includes at least two limit states, tensile rupture, and compressive buckling. The tensile stra...
NASA Astrophysics Data System (ADS)
Wei, Shiyin; Zhang, Zhaohui; Li, Shunlong; Li, Hui
2017-10-01
Strain is a direct indicator of structural safety. Therefore, strain sensors have been used in most structural health monitoring systems for bridges. However, until now, the investigation of strain response has been insufficient. This paper conducts a comprehensive study of the strain features of the U ribs and transverse diaphragm on an orthotropic steel deck and proposes a statistical paradigm for crack detection based on the features of vehicle-induced strain response by using the densely distributed optic fibre Bragg grating (FBG) strain sensors. The local feature of strain under vehicle load is highlighted, which enables the use of measurement data to determine the vehicle loading event and to make a decision regarding the health status of a girder near the strain sensors via technical elimination of the load information. Time-frequency analysis shows that the strain contains three features: the long-term trend item, the short-term trend item, and the instantaneous vehicle-induced item (IVII). The IVII is the wheel-induced strain with a remarkable local feature, and the measured wheel-induced strain is only influenced by the vehicle near the FBG sensor, while other vehicles slightly farther away have no effect on the wheel-induced strain. This causes the local strain series, among the FBG strain sensors in the same transverse locations of different cross-sections, to present similarities in shape to some extent and presents a time delay in successive order along the driving direction. Therefore, the strain series induced by an identical vehicle can be easily tracked and compared by extracting the amplitude and calculating the mutual ratio to eliminate vehicle loading information, leaving the girder information alone. The statistical paradigm for crack detection is finally proposed, and the detection accuracy is then validated by using dense FBG strain sensors on a long-span suspension bridge in China.
Comparative Proteome Analysis of Brucella melitensis Vaccine Strain Rev 1 and a Virulent Strain, 16M
Eschenbrenner, Michel; Wagner, Mary Ann; Horn, Troy A.; Kraycer, Jo Ann; Mujer, Cesar V.; Hagius, Sue; Elzer, Philip; DelVecchio, Vito G.
2002-01-01
The genus Brucella consists of bacterial pathogens that cause brucellosis, a major zoonotic disease characterized by undulant fever and neurological disorders in humans. Among the different Brucella species, Brucella melitensis is considered the most virulent. Despite successful use in animals, the vaccine strains remain infectious for humans. To understand the mechanism of virulence in B. melitensis, the proteome of vaccine strain Rev 1 was analyzed by two-dimensional gel electrophoresis and compared to that of virulent strain 16M. The two strains were grown under identical laboratory conditions. Computer-assisted analysis of the two B. melitensis proteomes revealed proteins expressed in either 16M or Rev 1, as well as up- or down-regulation of proteins specific for each of these strains. These proteins were identified by peptide mass fingerprinting. It was found that certain metabolic pathways may be deregulated in Rev 1. Expression of an immunogenic 31-kDa outer membrane protein, proteins utilized for iron acquisition, and those that play a role in sugar binding, lipid degradation, and amino acid binding was altered in Rev 1. PMID:12193611
Eschenbrenner, Michel; Wagner, Mary Ann; Horn, Troy A; Kraycer, Jo Ann; Mujer, Cesar V; Hagius, Sue; Elzer, Philip; DelVecchio, Vito G
2002-09-01
The genus Brucella consists of bacterial pathogens that cause brucellosis, a major zoonotic disease characterized by undulant fever and neurological disorders in humans. Among the different Brucella species, Brucella melitensis is considered the most virulent. Despite successful use in animals, the vaccine strains remain infectious for humans. To understand the mechanism of virulence in B. melitensis, the proteome of vaccine strain Rev 1 was analyzed by two-dimensional gel electrophoresis and compared to that of virulent strain 16M. The two strains were grown under identical laboratory conditions. Computer-assisted analysis of the two B. melitensis proteomes revealed proteins expressed in either 16M or Rev 1, as well as up- or down-regulation of proteins specific for each of these strains. These proteins were identified by peptide mass fingerprinting. It was found that certain metabolic pathways may be deregulated in Rev 1. Expression of an immunogenic 31-kDa outer membrane protein, proteins utilized for iron acquisition, and those that play a role in sugar binding, lipid degradation, and amino acid binding was altered in Rev 1.
Pheromonal divergence between two strains of Spodoptera frugiperda
USDA-ARS?s Scientific Manuscript database
Abstract- Spodoptera frugiperda consists of two genetically and behaviorally different strains, the corn- and the rice-strain, which seem to be in the process of sympatric speciation. We investigated the role of strain-specific sexual communication as a prezygotic mating barrier between both strains...
Camandaroba, Edson; Thé, Torriceli S; Pessina, Daniel Huber; Andrade, Sonia G
2006-01-01
Clonal histotropism and biological characters of five clones isolated during the early acute phase of the infection of Swiss mice with the Colombian strain of Trypanosoma cruzi (T. cruzi I), Biodeme Type III, were investigated. Clones were isolated from mice at the 10th and the 30th day of infection with the Colombian strain. Isolation was performed by micromanipulation and injection of one trypomatigote blood form into newborn mice, followed by passages into suckling mice for obtaining the inocula for the experimental groups. Mice infected with parental strain were also studied. All the clones have shown the basic characteristics of Biodeme Type III, with the same patterns of parasitemia, tissue tropism, morphological characters and isoenzymic profiles, such as the parental strain. Histotropism was most intense to myocardium and skeletal muscles, with intense lesions found in the advanced phase (20th to 30th day of infection). Both parental strain and the clones were seen to parasitize several organs and tissues; amastigote nests were identified in the cytoplasm of macrophages, adipose cells, smooth muscle of intestinal wall and Auerbach's neuronal plexus. The findings of the present study confirm the homology of the clones isolated from the Colombian strain, with predominance of a ‘principal clone’ and an ubiquitous distribution of parasites belonging to a same clone. PMID:16709229
High-Temperature Adhesive Strain Gage Developed
NASA Technical Reports Server (NTRS)
Pereira, J. Michael; Roberts, Gary D.
1997-01-01
Researchers at the NASA Lewis Research Center have developed a unique strain gage and adhesive system for measuring the mechanical properties of polymers and polymer composites at elevated temperatures. This system overcomes some of the problems encountered in using commercial strain gages and adhesives. For example, typical commercial strain gage adhesives require a postcure at temperatures substantially higher than the maximum test temperature. The exposure of the specimen to this temperature may affect subsequent results, and in some cases may be higher than the glass-transition temperature of the polymer. In addition, although typical commercial strain gages can be used for short times at temperatures up to 370 C, their long-term use is limited to 230 C. This precludes their use for testing some high-temperature polyimides near their maximum temperature capability. Lewis' strain gage and adhesive system consists of a nonencapsulated, unbacked gage grid that is bonded directly to the polymer after the specimen has been cured but prior to the normal postcure cycle. The gage is applied with an adhesive specially formulated to cure under the specimen postcure conditions. Special handling, mounting, and electrical connection procedures were developed, and a fixture was designed to calibrate each strain gage after it was applied to a specimen. A variety of tests was conducted to determine the performance characteristics of the gages at elevated temperatures on PMR-15 neat resin and titanium specimens. For these tests, which included static tension, thermal exposure, and creep tests, the gage and adhesive system performed within normal strain gage specifications at 315 C. An example of the performance characteristics of the gage can be seen in the figure, which compares the strain gage measurement on a polyimide specimen at 315 C with an extensometer measurement.
Efficient characterization of inhomogeneity in contraction strain pattern.
Nazzal, Christina M; Mulligan, Lawrence J; Criscione, John C
2012-05-01
Cardiac dyssynchrony often accompanies patients with heart failure (HF) and can lead to an increase in mortality rate. Cardiac resynchronization therapy (CRT) has been shown to provide substantial benefits to the HF population with ventricular dyssynchrony; however, there still exists a group of patients who do not respond to this treatment. In order to better understand patient response to CRT, it is necessary to quantitatively characterize both electrical and mechanical dyssynchrony. The quantification of mechanical dyssynchrony via characterization of contraction strain field inhomogeneity is the focus of this modeling investigation. Raw data from a 3D finite element (FE) model were received from Roy Kerckhoffs et al. and analyzed in MATLAB. The FE model consisted of canine left and right ventricles coupled to a closed circulation with the effects of the pericardium acting as a pressure on the epicardial surface. For each of three simulations (normal synchronous, SYNC, right ventricular apical pacing, RVA, and left ventricular free wall pacing, LVFW) the Gauss point locations and values were used to generate lookup tables (LUTs) with each entry representing a location in the heart. In essence, we employed piecewise cubic interpolation to generate a fine point cloud (LUTs) from a course point cloud (Gauss points). Strain was calculated in the fiber direction and was then displayed in multiple ways to better characterize strain inhomogeneity. By plotting average strain and standard deviation over time, the point of maximum contraction and the point of maximal inhomogeneity were found for each simulation. Strain values were organized into seven strain bins to show operative strain ranges and extent of inhomogeneity throughout the heart wall. In order to visualize strain propagation, magnitude, and inhomogeneity over time, we created 2D area maps displaying strain over the entire cardiac cycle. To visualize spatial strain distribution at the time point of maximum
Method of transferring strained semiconductor structure
Nastasi, Michael A [Santa Fe, NM; Shao, Lin [College Station, TX
2009-12-29
The transfer of strained semiconductor layers from one substrate to another substrate involves depositing a multilayer structure on a substrate having surface contaminants. An interface that includes the contaminants is formed in between the deposited layer and the substrate. Hydrogen atoms are introduced into the structure and allowed to diffuse to the interface. Afterward, the deposited multilayer structure is bonded to a second substrate and is separated away at the interface, which results in transferring a multilayer structure from one substrate to the other substrate. The multilayer structure includes at least one strained semiconductor layer and at least one strain-induced seed layer. The strain-induced seed layer can be optionally etched away after the layer transfer.
Whole Genome Analysis of a Wine Yeast Strain
Hauser, Nicole C.; Fellenberg, Kurt; Gil, Rosario; Bastuck, Sonja; Hoheisel, Jörg D.
2001-01-01
Saccharomyces cerevisiae strains frequently exhibit rather specific phenotypic features needed for adaptation to a special environment. Wine yeast strains are able to ferment musts, for example, while other industrial or laboratory strains fail to do so. The genetic differences that characterize wine yeast strains are poorly understood, however. As a first search of genetic differences between wine and laboratory strains, we performed DNA-array analyses on the typical wine yeast strain T73 and the standard laboratory background in S288c. Our analysis shows that even under normal conditions, logarithmic growth in YPD medium, the two strains have expression patterns that differ significantly in more than 40 genes. Subsequent studies indicated that these differences correlate with small changes in promoter regions or variations in gene copy number. Blotting copy numbers vs. transcript levels produced patterns, which were specific for the individual strains and could be used for a characterization of unknown samples. PMID:18628902
Jiang, Xiaowu; Yang, Yunkai; Zhu, Lexin; Gu, Yuanxing; Shen, Hongxia; Shan, Ying; Li, Xiaoliang; Wu, Jiusheng; Fang, Weihuan
2016-12-12
Streptococcus suis is one of the common pathogens causing diseases in pigs and covers 35 serotypes with the type 2 strains being more pathogenic and zoonotic. Existing inactivated or subunit vaccines, in clinical use or under trial, could not provide cross protection against other serotypes. We identified a natural low-virulence S. suis type 5 strain XS045 as a live vaccine candidate because it is highly adhesive to the cultured HEp-2 cells, but with no apparent pathogenicity in mice and piglets. We further demonstrate that subcutaneous administration of the live XS045 strain to mice induced high antibody responses and was able to provide cross protection against challenges by a type 2 strain HA9801 (100% protection) and a type 9 strain JX13 (85% protection). Induction of high-titer antibodies with opsonizing activity as well as their cross-reactivity to surface proteins of the types 2 and 9 strains and anti-adhesion effect could be the mechanisms of cross protection. This is the first report that a live vaccine candidate S. suis type 5 strain could induce cross-protection against strains of types 2 and 9. This candidate strain is to be further examined for safety in pigs of different ages and breeds as well as for its protection against other serotypes or other strains of the type 2, a serotype of particular importance from public health concern. Copyright © 2016 Elsevier Ltd. All rights reserved.
Peng, Zhong; Liu, Sidi; Meng, Xiujuan; Liang, Wan; Xu, Zhuofei; Tang, Biao; Wang, Yuanguo; Duan, Juping; Fu, Chenchao; Wu, Bin; Wu, Anhua; Li, Chunhui
2017-01-01
Clostridium difficile is an anaerobic Gram-positive spore-forming gut pathogen that causes antibiotic-associated diarrhea worldwide. A small number of C. difficile strains express the binary toxin (CDT), which is generally found in C. difficile 027 (ST1) and/or 078 (ST11) in clinic. However, we isolated a binary toxin-positive non-027, non-078 C. difficile LC693 that is associated with severe diarrhea in China. The genotype of this strain was determined as ST201. To understand the pathogenesis-basis of C. difficile ST201, the strain LC693 was chosen for whole genome sequencing, and its genome sequence was analyzed together with the other two ST201 strains VL-0104 and VL-0391 and compared to the epidemic 027/ST1 and 078/ST11 strains. The project finally generated an estimated genome size of approximately 4.07 Mbp for strain LC693. Genome size of the three ST201 strains ranged from 4.07 to 4.16 Mb, with an average GC content between 28.5 and 28.9%. Phylogenetic analysis demonstrated that the ST201 strains belonged to clade 3. The ST201 genomes contained more than 40 antibiotic resistance genes and 15 of them were predicted to be associated with vancomycin-resistance. The ST201 strains contained a larger PaLoc with a Tn6218 element inserted than the 027/ST1 and 078/ST11 strains, and encoded a truncated TcdC. In addition, the ST201 strains contained intact binary toxin coding and regulation genes which are highly homologous to the 027/ST1 strain. Genome comparison of the ST201 strains with the epidemic 027 and 078 strain identified 641 genes specific for C. difficile ST201, and a number of them were predicted as fitness and virulence associated genes. The presence of those genes also contributes to the pathogenesis of the ST201 strains. In this study, the genomic characterization of three binary toxin-positive C. difficile ST201 strains in clade 3 was discussed and compared to the genomes of the epidemic 027 and the 078 strains. Our analysis identified a number
NASA Technical Reports Server (NTRS)
Zamrik, S. Y.
1972-01-01
The effect of out-of-phase strain cycling on the low cycle fatigue of biaxially loaded specimens is discussed. A method to apply phase angles between two strains imposed in two different directions was developed. The data and the proposed theoretical analysis are part of a research program on biaxial strain cycling effect on fatigue life of structural materials.
Laser-induced photo-thermal strain imaging
NASA Astrophysics Data System (ADS)
Choi, Changhoon; Ahn, Joongho; Jeon, Seungwan; Kim, Chulhong
2018-02-01
Vulnerable plaque is the one of the leading causes of cardiovascular disease occurrence. However, conventional intravascular imaging techniques suffer from difficulty in finding vulnerable plaque due to limitation such as lack of physiological information, imaging depth, and depth sensitivity. Therefore, new techniques are needed to help determine the vulnerability of plaque, Thermal strain imaging (TSI) is an imaging technique based on ultrasound (US) wave propagation speed that varies with temperature of medium. During temperature increase, strain occurs in the medium and its variation tendency is depending on the type of tissue, which makes it possible to use for tissue differentiation. Here, we demonstrate laser-induced photo-thermal strain imaging (pTSI) to differentiate tissue using an intravascular ultrasound (IVUS) catheter and a 1210-nm continuous-wave laser for heating lipids intensively. During heating, consecutive US images were obtained from a custom-made phantom made of porcine fat and gelatin. A cross correlation-based speckle-tracking algorithm was then applied to calculate the strain of US images. In the strain images, the positive strain produced in lipids (porcine fat) was clearly differentiated from water-bearing tissue (gelatin). This result shows that laser-induced pTSI could be a new method to distinguish lipids in the plaque and can help to differentiate vulnerability of plaque.
Strain-controlled electrocatalysis on multimetallic nanomaterials
NASA Astrophysics Data System (ADS)
Luo, Mingchuan; Guo, Shaojun
2017-11-01
Electrocatalysis is crucial for the development of clean and renewable energy technologies, which may reduce our reliance on fossil fuels. Multimetallic nanomaterials serve as state-of-the-art electrocatalysts as a consequence of their unique physico-chemical properties. One method of enhancing the electrocatalytic performance of multimetallic nanomaterials is to tune or control the surface strain of the nanomaterials, and tremendous progress has been made in this area in the past decade. In this Review, we summarize advances in the introduction, tuning and quantification of strain in multimetallic nanocrystals to achieve more efficient energy conversion by electrocatalysis. First, we introduce the concept of strain and its correlation with other key physico-chemical properties. Then, using the electrocatalytic reduction of oxygen as a model reaction, we discuss the underlying mechanisms behind the strain-adsorption-reactivity relationship based on combined classical theories and models. We describe how this knowledge can be harnessed to design multimetallic nanocrystals with optimized strain to increase the efficiency of oxygen reduction. In particular, we highlight the unexpectedly beneficial (and previously overlooked) role of tensile strain from multimetallic nanocrystals in improving electrocatalysis. We conclude by outlining the challenges and offering our perspectives on the research directions in this burgeoning field.
Inexpensive Implementation of Many Strain Gauges
NASA Technical Reports Server (NTRS)
Berkun, Andrew C.
2010-01-01
It has been proposed to develop arrays of strain gauges as arrays of ordinary metal film resistors and associated electronic readout circuitry on printed circuit boards or other suitable substrates. This proposal is a by-product of a development of instrumentation utilizing metal film resistors on printed-circuit boards to measure temperatures at multiple locations. In the course of that development, it was observed that in addition to being sensitive to temperature, the metal film resistors were also sensitive to strains in the printed-circuit boards to which they were attached. Because of the low cost of ordinary metal film resistors (typically <$0.01 apiece at 2007 prices), the proposal could enable inexpensive implementation of arrays of many (e.g., 100 or more) strain gauges, possibly concentrated in small areas. For example, such an array could be designed for use as a computer keyboard with no moving parts, as a device for sensing the shape of an object resting on a surface, or as a device for measuring strains at many points on a mirror, a fuel tank, an airplane wing, or other large object. Ordinarily, the effect of strain on resistance would be regarded as a nuisance in a temperature-measuring application, and the effect of temperature on resistance would be regarded as a nuisance in a strain-measuring application. The strain-induced changes in resistance of the metal film resistors in question are less than those of films in traditional strain gauges. The main novel aspect of present proposal lies in the use of circuitry affording sufficient sensitivity to measure strain plus means for compensating for the effect of temperature. For an array of metal film resistors used as proposed, the readout circuits would include a high-accuracy analog-to-digital converter fed by a low noise current source, amplifier chain, and an analog multiplexer chain. Corrections would be provided by use of high-accuracy calibration resistors and a temperature sensor. By use of
Kim, Minsuk; Yi, Jeong Sang; Lakshmanan, Meiyappan; Lee, Dong-Yup; Kim, Byung-Gee
2016-03-01
In silico model-driven analysis using genome-scale model of metabolism (GEM) has been recognized as a promising method for microbial strain improvement. However, most of the current GEM-based strain design algorithms based on flux balance analysis (FBA) heavily rely on the steady-state and optimality assumptions without considering any regulatory information. Thus, their practical usage is quite limited, especially in its application to secondary metabolites overproduction. In this study, we developed a transcriptomics-based strain optimization tool (tSOT) in order to overcome such limitations by integrating transcriptomic data into GEM. Initially, we evaluated existing algorithms for integrating transcriptomic data into GEM using Streptomyces coelicolor dataset, and identified iMAT algorithm as the only and the best algorithm for characterizing the secondary metabolism of S. coelicolor. Subsequently, we developed tSOT platform where iMAT is adopted to predict the reaction states, and successfully demonstrated its applicability to secondary metabolites overproduction by designing actinorhodin (ACT), a polyketide antibiotic, overproducing strain of S. coelicolor. Mutants overexpressing tSOT targets such as ribulose 5-phosphate 3-epimerase and NADP-dependent malic enzyme showed 2 and 1.8-fold increase in ACT production, thereby validating the tSOT prediction. It is expected that tSOT can be used for solving other metabolic engineering problems which could not be addressed by current strain design algorithms, especially for the secondary metabolite overproductions. © 2015 Wiley Periodicals, Inc.
NASA Astrophysics Data System (ADS)
Yang, Li-Juan; Weng, Ya-Kui; Zhang, Hui-Min; Dong, Shuai
2014-11-01
The compressive strain effect on the magnetic ground state and electronic structure of strained GdTiO3 has been studied using the first-principles method. Unlike the cases of congeneric YTiO3 and LaTiO3, both of which become the A-type antiferromagnetism on the (0 0 1) LaAlO3 substrate despite their contrastive magnetism, the ground state of strained GdTiO3 on the LaAlO3 substrate changes from the original ferromagnetism to a G-type antiferromagnetim, instead of the A-type one although Gd3+ is between Y3+ and La3+. It is only when the in-plane compressive strain is large enough, e.g. on the (0 0 1) YAlO3 substrate, that the ground state finally becomes the A-type. The band structure calculation shows that the compressive strained GdTiO3 remains insulating, although the band gap changes a little in the strained GdTiO3.
Inoue, Hiroyuki; Hashimoto, Seitaro; Matsushika, Akinori; Watanabe, Seiya; Sawayama, Shigeki
2014-12-01
The industrial Saccharomyces cerevisiae IR-2 is a promising host strain to genetically engineer xylose-utilizing yeasts for ethanol fermentation from lignocellulosic hydrolysates. Two IR-2-based haploid strains were selected based upon the rate of xylulose fermentation, and hybrids were obtained by mating recombinant haploid strains harboring heterogeneous xylose dehydrogenase (XDH) (wild-type NAD(+)-dependent XDH or engineered NADP(+)-dependent XDH, ARSdR), xylose reductase (XR) and xylulose kinase (XK) genes. ARSdR in the hybrids selected for growth rates on yeast extract-peptone-dextrose (YPD) agar and YP-xylose agar plates typically had a higher activity than NAD(+)-dependent XDH. Furthermore, the xylose-fermenting performance of the hybrid strain SE12 with the same level of heterogeneous XDH activity was similar to that of a recombinant strain of IR-2 harboring a single set of genes, XR/ARSdR/XK. These results suggest not only that the recombinant haploid strains retain the appropriate genetic background of IR-2 for ethanol production from xylose but also that ARSdR is preferable for xylose fermentation.
NASA Technical Reports Server (NTRS)
Hofmann, Douglas C. (Inventor); Wilcox, Brian (Inventor)
2016-01-01
Bulk metallic glass-based strain wave gears and strain wave gear components. In one embodiment, a strain wave gear includes: a wave generator; a flexspline that itself includes a first set of gear teeth; and a circular spline that itself includes a second set of gear teeth; where at least one of the wave generator, the flexspline, and the circular spline, includes a bulk metallic glass-based material.
NASA Astrophysics Data System (ADS)
Bland, Michael T.; McKinnon, William B.
2015-01-01
The ubiquity of tectonic features formed in extension, and the apparent absence of ones formed in contraction, has led to the hypothesis that Ganymede has undergone global expansion in its past. Determining the magnitude of such expansion is challenging however, and extrapolation of locally or regionally inferred strains to global scales often results in strain estimates that exceed those based on global constraints. Here we use numerical simulations of groove terrain formation to develop a strain history for Ganymede that is generally consistent at local, regional, and global scales. These simulations reproduce groove-like amplitudes, wavelengths, and average slopes at modest regional extensions (10-15%). The modest strains are more consistent with global constraints on Ganymede's expansion. Yet locally, we also find that surface strains can be much larger (30-60%) in the same simulations, consistent with observations of highly-extended impact craters. Thus our simulations satisfy both the smallest-scale and largest-scale inferences of strain on Ganymede. The growth rate of the topography is consistent with (or exceeds) predictions of analytical models, and results from the use of a non-associated plastic rheology that naturally permits localization of brittle failure (plastic strain) into linear fault-like shear zones. These fault-like zones are organized into periodically-spaced graben-like structures with stepped, steeply-dipping faults. As in previous work, groove amplitudes and wavelengths depend on both the imposed heat flux and surface temperature, but because our brittle strength increases with depth, we find (for the parameters explored) that the growth rate of topography is initially faster for lower heat flows. We observe a transition to narrow rifting for higher heat flows and larger strains, which is a potential pathway for breakaway margin or band formation.
Dynamic strains for earthquake source characterization
Barbour, Andrew J.; Crowell, Brendan W
2017-01-01
Strainmeters measure elastodynamic deformation associated with earthquakes over a broad frequency band, with detection characteristics that complement traditional instrumentation, but they are commonly used to study slow transient deformation along active faults and at subduction zones, for example. Here, we analyze dynamic strains at Plate Boundary Observatory (PBO) borehole strainmeters (BSM) associated with 146 local and regional earthquakes from 2004–2014, with magnitudes from M 4.5 to 7.2. We find that peak values in seismic strain can be predicted from a general regression against distance and magnitude, with improvements in accuracy gained by accounting for biases associated with site–station effects and source–path effects, the latter exhibiting the strongest influence on the regression coefficients. To account for the influence of these biases in a general way, we include crustal‐type classifications from the CRUST1.0 global velocity model, which demonstrates that high‐frequency strain data from the PBO BSM network carry information on crustal structure and fault mechanics: earthquakes nucleating offshore on the Blanco fracture zone, for example, generate consistently lower dynamic strains than earthquakes around the Sierra Nevada microplate and in the Salton trough. Finally, we test our dynamic strain prediction equations on the 2011 M 9 Tohoku‐Oki earthquake, specifically continuous strain records derived from triangulation of 137 high‐rate Global Navigation Satellite System Earth Observation Network stations in Japan. Moment magnitudes inferred from these data and the strain model are in agreement when Global Positioning System subnetworks are unaffected by spatial aliasing.
Maceira, Alicia M; Tuset-Sanchis, Luis; López-Garrido, Miguel; San Andres, Marta; López-Lereu, M Pilar; Monmeneu, Jose V; García-González, M Pilar; Higueras, Laura
2018-05-01
The measurement of myocardial deformation by strain analysis is an evolving tool to quantify regional and global myocardial function. To assess the feasibility and reproducibility of myocardial strain/strain rate measurements with magnetic resonance feature tracking (MR-FT) in healthy subjects and in patient groups. Prospective study. Sixty patients (20 hypertensives with left ventricular (LV) hypertrophy (H); 20 nonischemic dilated cardiomyopathy (D); 20 ischemic heart disease (I); as well as 20 controls (C) were included, 10 men and 10 women in each group. A 1.5T MR protocol including steady-state free precession (SSFP) cine sequences in the standard views and late enhancement sequences. LV volumes, mass, global and regional radial, circumferential, and longitudinal strain/strain rate were measured using CVI42 software. The analysis time was recorded. Intraobserver and interobserver agreement and intraclass correlation coefficients (ICC) were obtained for reproducibility assessment as well as differences according to gender and group of pertinence. Strain/strain rate analysis could be achieved in all subjects. The average analysis time was 14 ± 3 minutes. The average intraobserver ICC was excellent (ICC >0.90) for strain and good (ICC >0.75) for strain rate. Reproducibility of strain measurements was good to excellent (ICC >0.75) for all groups of subjects and both genders. Reproducibility of strain measurements was good for basal segments (ICC >0.75) and excellent for middle and apical segments (ICC >0.90). Reproducibility of strain rate measurements was moderate for basal segments (ICC >0.50) and good for middle and apical segments. MR-FT for strain/strain rate analysis is a feasible and highly reproducible technique. CVI42 FT analysis was equally feasible and reproducible in various pathologies and between genders. Better reproducibility was seen globally for middle and apical segments, which needs further clarification. 3 Technical Efficacy Stage 2 J
ERIC Educational Resources Information Center
Bao, Wan-Ning; Haas, Ain; Chen, Xiaojin; Pi, Yijun
2014-01-01
In Agnew's general strain theory, repeated strains can generate crime and delinquency by reducing social control and fostering social learning of crime. Using a sample of 615 middle-and high-school students in China, this study examines how social control and social learning variables mediate the effect of repeated strains in school and at home on…
Zhu, Ling; Shahid, Muhammad A; Markham, John; Browning, Glenn F; Noormohammadi, Amir H; Marenda, Marc S
2018-02-02
The bacterial pathogen Mycoplasma synoviae can cause subclinical respiratory disease, synovitis, airsacculitis and reproductive tract disease in poultry and is a major cause of economic loss worldwide. The M. synoviae strain MS-H was developed by chemical mutagenesis of an Australian isolate and has been used as a live attenuated vaccine in many countries over the past two decades. As a result it may now be the most prevalent strain of M. synoviae globally. Differentiation of the MS-H vaccine from local field strains is important for epidemiological investigations and is often required for registration of the vaccine. The complete genomic sequence of the MS-H strain was determined using a combination of Illumina and Nanopore methods and compared to WVU-1853, the M. synoviae type strain isolated in the USA 30 years before the parent strain of MS-H, and MS53, a more recent isolate from Brazil. The vaccine strain genome had a slightly larger number of pseudogenes than the two other strains and contained a unique 55 kb chromosomal inversion partially affecting a putative genomic island. Variations in gene content were also noted, including a deoxyribose-phosphate aldolase (deoC) fragment and an ATP-dependent DNA helicase gene found only in MS-H. Some of these sequences may have been acquired horizontally from other avian mycoplasma species. MS-H was somewhat more similar to WVU-1853 than to MS53. The genome sequence of MS-H will enable identification of vaccine-specific genetic markers for use as diagnostic and epidemiological tools to better control M. synoviae.
Curvature reduces bending strains in the quokka femur
McCabe, Kyle; Henderson, Keith; Pantinople, Jess; Milne, Nick
2017-01-01
This study explores how curvature in the quokka femur may help to reduce bending strain during locomotion. The quokka is a small wallaby, but the curvature of the femur and the muscles active during stance phase are similar to most quadrupedal mammals. Our hypothesis is that the action of hip extensor and ankle plantarflexor muscles during stance phase place cranial bending strains that act to reduce the caudal curvature of the femur. Knee extensors and biarticular muscles that span the femur longitudinally create caudal bending strains in the caudally curved (concave caudal side) bone. These opposing strains can balance each other and result in less strain on the bone. We test this idea by comparing the performance of a normally curved finite element model of the quokka femur to a digitally straightened version of the same bone. The normally curved model is indeed less strained than the straightened version. To further examine the relationship between curvature and the strains in the femoral models, we also tested an extra-curved and a reverse-curved version with the same loads. There appears to be a linear relationship between the curvature and the strains experienced by the models. These results demonstrate that longitudinal curvature in bones may be a manipulable mechanism whereby bone can induce a strain gradient to oppose strains induced by habitual loading. PMID:28348929
Occupational stress and strain in the Royal Navy 2007.
Bridger, R S; Brasher, K; Dew, A; Kilminster, S
2008-12-01
Previous surveys of psychological strain in the Naval Service (NS) have shown higher than expected levels of strain when compared to the general population. To repeat the survey last carried out in 2004 and to obtain further information on the nature of the occupational stressors associated with strain. General Health Questionnaire-12 strain rates and job/life stressors were measured using a Work and Well-Being Questionnaire. Models of strain were developed for male and female personnel in the Royal Navy (RN) and males in the Royal Marines (RM). The response rate was 57%. The psychological strain rate was 31.5% overall. Personnel suffering from strain tended to be 'overcommitted' to work, had low levels of commitment to the NS and had suffered stressful life events (SLEs) in the previous 12 months. Strain rates declined with age and rank in males, but not in females. Strain was significantly positively correlated with levels of overcommitment, effort-reward imbalance (ERI), role conflict, work-family conflict, organizational commitment and exposure to SLEs. Models of strain in the males and females in the RN and in the RM accounted for between 37 and 44% of the variance in strain. The survey provides evidence for both the demand control and ERI models-components of these models contribute independently to strain. High levels of commitment to the organization were associated with lower strain and exposure to SLEs to higher strain.
Tensile stress-strain behavior of boron/aluminum laminates
NASA Technical Reports Server (NTRS)
Sova, J. A.; Poe, C. C., Jr.
1978-01-01
The tensile stress-strain behavior of five types of boron/aluminum laminates was investigated. Longitudinal and transverse stress-strain curves were obtained for monotonic loading to failure and for three cycles of loading to successively higher load levels. The laminate strengths predicted by assuming that the zero deg plies failed first correlated well with the experimental results. The stress-strain curves for all the boron/aluminum laminates were nonlinear except at very small strains. Within the small linear regions, elastic constants calculated from laminate theory corresponded to those obtained experimentally to within 10 to 20 percent. A limited amount of cyclic loading did not affect the ultimate strength and strain for the boron/aluminum laminates. The laminates, however, exhibited a permanent strain on unloading. The Ramberg-Osgood equation was fitted to the stress-strain curves to obtain average curves for the various laminates.
Lattice Strain Due to an Atomic Vacancy
Li, Shidong; Sellers, Michael S.; Basaran, Cemal; Schultz, Andrew J.; Kofke, David A.
2009-01-01
Volumetric strain can be divided into two parts: strain due to bond distance change and strain due to vacancy sources and sinks. In this paper, efforts are focused on studying the atomic lattice strain due to a vacancy in an FCC metal lattice with molecular dynamics simulation (MDS). The result has been compared with that from a continuum mechanics method. It is shown that using a continuum mechanics approach yields constitutive results similar to the ones obtained based purely on molecular dynamics considerations. PMID:19582230
Using strain rates to forecast seismic hazards
Evans, Eileen
2017-01-01
One essential component in forecasting seismic hazards is observing the gradual accumulation of tectonic strain accumulation along faults before this strain is suddenly released as earthquakes. Typically, seismic hazard models are based on geologic estimates of slip rates along faults and historical records of seismic activity, neither of which records actively accumulating strain. But this strain can be estimated by geodesy: the precise measurement of tiny position changes of Earth’s surface, obtained from GPS, interferometric synthetic aperture radar (InSAR), or a variety of other instruments.
Strain isolated ceramic coatings
NASA Technical Reports Server (NTRS)
Tolokan, R. P.; Brady, J. B.; Jarrabet, G. P.
1985-01-01
Plasma sprayed ceramic coatings are used in gas turbine engines to improve component temperature capability and cooling air efficiency. A compliant metal fiber strain isolator between a plasma sprayed ceramic coating and a metal substrate improves ceramic durability while allowing thicker coatings for better insulation. Development of strain isolated coatings has concentrated on design and fabrication of coatings and coating evaluation via thermal shock testing. In thermal shock testing, five types of failure are possible: buckling failure im compression on heat up, bimetal type failure, isothermal expansion mismatch failure, mudflat cracking during cool down, and long term fatigue. A primary failure mode for thermally cycled coatings is designated bimetal type failure. Bimetal failure is tensile failure in the ceramic near the ceramic-metal interface. One of the significant benefits of the strain isolator is an insulating layer protecting the metal substrate from heat deformation and thereby preventing bimetal type failure.
Roos, Viktoria; Ulett, Glen C; Schembri, Mark A; Klemm, Per
2006-01-01
Escherichia coli is the most common organism associated with asymptomatic bacteriuria (ABU). In contrast to uropathogenic E. coli (UPEC), which causes symptomatic urinary tract infections (UTI), very little is known about the mechanisms by which these strains colonize the human urinary tract. The prototype ABU E. coli strain 83972 was originally isolated from a girl who had carried it asymptomatically for 3 years. Deliberate colonization of UTI-susceptible individuals with E. coli 83972 has been used successfully as an alternative approach for the treatment of patients who are refractory to conventional therapy. Colonization with strain 83972 appears to prevent infection with UPEC strains in such patients despite the fact that this strain is unable to express the primary adhesins involved in UTI, viz. P and type 1 fimbriae. Here we investigated the growth characteristics of E. coli 83972 in human urine and show that it can outcompete a representative spectrum of UPEC strains for growth in urine. The unique ability of ABU E. coli 83972 to outcompete UPEC in urine was also demonstrated in a murine model of human UTI, confirming the selective advantage over UPEC in vivo. Comparison of global gene expression profiles of E. coli 83972 grown in lab medium and human urine revealed significant differences in expression levels in the two media; significant down-regulation of genes encoding virulence factors such as hemolysin, lipid A, and capsular polysaccharides was observed in cells grown in urine. Clearly, divergent abilities of ABU E. coli and UPEC to exploit human urine as a niche for persistence and survival suggest that these key differences may be exploited for preventative and/or therapeutic approaches.
Toyo-Oka, L; Mahasirimongkol, S; Yanai, H; Mushiroda, T; Wattanapokayakit, S; Wichukchinda, N; Yamada, N; Smittipat, N; Juthayothin, T; Palittapongarnpim, P; Nedsuwan, S; Kantipong, P; Takahashi, A; Kubo, M; Sawanpanyalert, P; Tokunaga, K
2017-09-01
Tuberculosis (TB) occurs as a result of complex interactions between the host immune system and pathogen virulence factors. Human leukocyte antigen (HLA) class II molecules play an important role in the host immune system. However, no study has assessed the association between HLA class II genes and susceptibility to TB caused by specific strains. This study investigated the possible association of HLA class II genes with TB caused by modern and ancient Mycobacterium tuberculosis (MTB). The study included 682 patients with TB and 836 control subjects who were typed for HLA-DRB1 and HLA-DQB1 alleles. MTB strains were classified using a large sequence polymorphism typing method. Association analysis was performed using common HLA alleles and haplotypes in different MTB strains. HLA association analysis of patients infected with modern MTB strains showed significant association for HLA-DRB1*09:01 (odds ratio [OR] = 1.82; P-value = 9.88 × 10 -4 ) and HLA-DQB1*03:03 alleles (OR = 1.76; P-value = 1.31 × 10 -3 ) with susceptibility to TB. Haplotype analysis confirmed that these alleles were in strong linkage disequilibrium and did not exert an interactive effect. Thus, the results of this study showed an association between HLA class II genes and susceptibility to TB caused by modern MTB strains, suggesting the importance of strain-specific analysis to determine susceptibility genes associated with TB. © 2017 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.
[Screening and optimization of cholesterol conversion strain].
Fan, Dan; Xiong, Bingjian; Pang, Cuiping; Zhu, Xiangdong
2014-10-04
Bacterial strain SE-1 capable of transforming cholesterol was isolated from soil and characterized. The transformation products were identified. Fermentation conditions were optimized for conversion. Cholesterol was used as sole carbon source to isolate strain SE-1. Morphology, physiological and biochemical characteristics of strain SE-1 were studied. 16S rRNA gene was sequenced and subjected to phylogenetic analysis. Fermentation supernatants were extracted with chloroform, the transformation products were analyzed by silica gel thin layer chromatography and Sephadex LH20. Their structures were identified by 1H-NMR and 13C-NMR. Fermentation medium including carbon and nitrogen, methods of adding substrates and fermentation conditions for Strain SE-1 were optimized. Strain SE-1 was a Gram-negative bacterium, exhibiting the highest homologs to Burkholderia cepacia based on the physiological analysis. The sequence analysis of 16S rRNA gene of SE-1 strain and comparison with related Burkholderia show that SE-1 strain was very close to B. cepacia (Genbank No. U96927). The similarity was 99%. The result of silica gel thin layer chromatography shows that strain SE-1 transformed cholesterol to two products, 7beta-hydroxycholesterol and the minor product was 7-oxocholesterol. The optimum culture conditions were: molasses 5%, (NH4 )2SO4 0.3%, 4% of inoculation, pH 7.5 and 36 degrees C. Under the optimum culture condition, the conversion rate reached 34.4% when concentration of cholesterol-Tween 80 was 1 g/L. Cholesterol 7beta-hydroxylation conversion rate under optimal conditions was improved by 20.8%. Strain SE-1 isolated from soil is capable of converting cholesterol at lab-scale.
High-Temperature Resistance Strain Gauges
NASA Technical Reports Server (NTRS)
Lei, Jih-Fen
1994-01-01
Resistance strain gauges developed for use at high temperatures in demanding applications like testing aircraft engines and structures. Measures static strains at temperatures up to 800 degrees C. Small and highly reproducible. Readings corrected for temperature within small tolerances, provided temperatures measured simultaneously by thermocouples or other suitable devices. Connected in wheatstone bridge.
Moire strain analysis of paper
R. E. Rowlands; P. K. Beasley; D. E. Gunderson
1983-01-01
Efficient use of paper products involves using modern aspects of materials science and engineering mechanics. This implies the ability to determine simultaneously different components of strain at multiple locations and under static or dynamic conditions. Although measuring strains in paper has been a topic of interest for over 40 years, present capability remains...
Strain Rate Sensitivity of Graphite/Polymer Laminate Composites
NASA Astrophysics Data System (ADS)
Syed, Izhar H.; Brar, N. S.
2002-07-01
Strain rate sensitivities of Graphite/Epoxy and Graphite/Peek laminate composites are investigated by measuring their stress-strain response at strain rates of 0.001/s, 0.1/s, and 400/s. Tension specimens of the composite laminates are fabricated in a dog-bone shape. Stress-strain data at quasi-static rates of 0.001/s and 0.1/s are obtained using a servohydraulic test system. High strain rate data are produced with a Direct Tension Split Hopkinson Bar (DTSHB). A tensile stress pulse is generated in the DTSHB by impacting a stopper flange at the end of the incident bar with an aluminum/polymeric tube launched around the incident bar. The failure (flow) tensile stress of Graphite/Epoxy increases from 240 MPa to 280±10 MPa (ɛ = 0.06) when the strain rate is raised from 0.001/s to 400/s. For Graphite/Peek, failure (flow) tension stress increases from 175 MPa at a strain rate of 0.001/s to 270±20 MPa at a strain rate of 400/s.
Development of High Cordycepin-Producing Cordyceps militaris Strains.
Kang, Naru; Lee, Hyun-Hee; Park, Inmyoung; Seo, Young-Su
2017-03-01
Cordyceps militaris , known as Dong-Chong-Xia-Cao, produces the most cordycepin among Cordyceps species and can be cultured artificially. For these reasons, C. militaris is widely used as herb or functional food in the East Asia. In this study, we developed a new strain of C. militaris that produces higher cordycepin content than parent strains through mating-based sexual reproduction. Twenty parent strains were collected and identified as C. militaris based on internal trasncrived spacer and rDNA sequences. Seven single spores of MAT 1-1 idiomorph and five single spores of MAT 1-2 idiomorph were isolated from 12 parent strains. When 35 combinations were mated on the brown rice medium with the isolated single spores, eight combinations formed a stroma with a normal perithecia and confirmed mated strains. High pressure liquid chromatography analysis showed that mated strain KSP8 produced the most cordycepin in all the media among all the tested strains. This result showed due to genetic recombination occurring during the sexual reproduction of C. militaris . The development of C. militaris strain with increased cordycepin content by this approach can help not only to generate new C. militaris strains, but also to contribute to the health food or medicine industry.
Development of High Cordycepin-Producing Cordyceps militaris Strains
Kang, Naru; Lee, Hyun-Hee; Park, Inmyoung
2017-01-01
Cordyceps militaris, known as Dong-Chong-Xia-Cao, produces the most cordycepin among Cordyceps species and can be cultured artificially. For these reasons, C. militaris is widely used as herb or functional food in the East Asia. In this study, we developed a new strain of C. militaris that produces higher cordycepin content than parent strains through mating-based sexual reproduction. Twenty parent strains were collected and identified as C. militaris based on internal trasncrived spacer and rDNA sequences. Seven single spores of MAT 1-1 idiomorph and five single spores of MAT 1-2 idiomorph were isolated from 12 parent strains. When 35 combinations were mated on the brown rice medium with the isolated single spores, eight combinations formed a stroma with a normal perithecia and confirmed mated strains. High pressure liquid chromatography analysis showed that mated strain KSP8 produced the most cordycepin in all the media among all the tested strains. This result showed due to genetic recombination occurring during the sexual reproduction of C. militaris. The development of C. militaris strain with increased cordycepin content by this approach can help not only to generate new C. militaris strains, but also to contribute to the health food or medicine industry. PMID:28435352
Acceleration and Velocity Sensing from Measured Strain
NASA Technical Reports Server (NTRS)
Pak, Chan-Gi; Truax, Roger
2016-01-01
A simple approach for computing acceleration and velocity of a structure from the strain is proposed in this study. First, deflection and slope of the structure are computed from the strain using a two-step theory. Frequencies of the structure are computed from the time histories of strain using a parameter estimation technique together with an Autoregressive Moving Average model. From deflection, slope, and frequencies of the structure, acceleration and velocity of the structure can be obtained using the proposed approach. shape sensing, fiber optic strain sensor, system equivalent reduction and expansion process.
Inflatable device for installing strain gage bridges
NASA Technical Reports Server (NTRS)
Cook, C. E.; Smith, G. E.; Monaghan, R. C. (Inventor)
1983-01-01
Methods and devices for installing in a tubular shaft multiple strain gages are disclosed with focus on a method and a device for pneumatically forcing strain gages into seated engagement with the internal surfaces of a tubular shaft in an installation of multiple strain gages in a tubular shaft. The strain gages or other electron devices are seated in a template-like component which is wrapped about a pneumatically expansible body. The component is inserted into a shaft and the body is pneumatically expanded after a suitable adhesive was applied to the surfaces.
ERIC Educational Resources Information Center
Moon, Byongook; Morash, Merry; McCluskey, Cynthia Perez; Hwang, Hye-Won
2009-01-01
Using longitudinal data on South Korean youth, the authors addressed limitations of previous tests of general strain theory (GST), focusing on the relationships among key strains, situational- and trait-based negative emotions, conditioning factors, and delinquency. Eight types of strain previously shown most likely to result in delinquency,…
2016-10-27
Institute of Infectious Diseases, Fort Detrick, Frederick, Maryland, USA 9 10 11 Running head: Complete Genome Sequence of Y. pestis strain Cadman...1 Complete Genome Sequence of Pigmentation Negative Yersinia pestis strain Cadman 1 2 3 Sean Lovetta, Kitty Chaseb, Galina Korolevaa, Gustavo...we report the genome sequence of Yersinia pestis strain Cadman, an attenuated strain 25 lacking the pgm locus. Y. pestis is the causative agent of
Management of digital eye strain.
Coles-Brennan, Chantal; Sulley, Anna; Young, Graeme
2018-05-23
Digital eye strain, an emerging public health issue, is a condition characterised by visual disturbance and/or ocular discomfort related to the use of digital devices and resulting from a range of stresses on the ocular environment. This review aims to provide an overview of the extensive literature on digital eye strain research with particular reference to the clinical management of symptoms. As many as 90 per cent of digital device users experience symptoms of digital eye strain. Many studies suggest that the following factors are associated with digital eye strain: uncorrected refractive error (including presbyopia), accommodative and vergence anomalies, altered blinking pattern (reduced rate and incomplete blinking), excessive exposure to intense light, closer working distance, and smaller font size. Since a symptom may be caused by one or more factors, a holistic approach should be adopted. The following management strategies have been suggested: (i) appropriate correction of refractive error, including astigmatism and presbyopia; (ii) management of vergence anomalies, with the aim of inducing or leaving a small amount of heterophoria (~1.5 Δ Exo); (iii) blinking exercise/training to maintain normal blinking pattern; (iv) use of lubricating eye drops (artificial tears) to help alleviate dry eye-related symptoms; (v) contact lenses with enhanced comfort, particularly at end-of-day and in challenging environments; (vi) prescription of colour filters in all vision correction options, especially blue light-absorbing filters; and (vii) management of accommodative anomalies. Prevention is the main strategy for management of digital eye strain, which involves: (i) ensuring an ergonomic work environment and practice (through patient education and the implementation of ergonomic workplace policies); and (ii) visual examination and eye care to treat visual disorders. Special consideration is needed for people at a high risk of digital eye strain, such as computer
Fiber-Optic Strain Gauge With High Resolution And Update Rate
NASA Technical Reports Server (NTRS)
Figueroa, Fernando; Mahajan, Ajay; Sayeh, Mohammad; Regez, Bradley
2007-01-01
An improved fiber-optic strain gauge is capable of measuring strains in the approximate range of 0 to 50 microstrains with a resolution of 0.1 microstrain. (To some extent, the resolution of the strain gauge can be tailored and may be extensible to 0.01 microstrain.) The total cost of the hardware components of this strain gauge is less than $100 at 2006 prices. In comparison with prior strain gauges capable of measurement of such low strains, this strain gauge is more accurate, more economical, and more robust, and it operates at a higher update rate. Strain gauges like this one are useful mainly for measuring small strains (including those associated with vibrations) in such structures as rocket test stands, buildings, oilrigs, bridges, and dams. The technology was inspired by the need to measure very small strains on structures supporting liquid oxygen tanks, as a way to measure accurately mass of liquid oxygen during rocket engine testing. This improved fiber-optic strain gauge was developed to overcome some of the deficiencies of both traditional foil strain gauges and prior fiber-optic strain gauges. Traditional foil strain gages do not have adequate signal-to-noise ratios at such small strains. Fiber-optic strain gauges have been shown to be potentially useful for measuring such small strains, but heretofore, the use of fiberoptic strain gauges has been inhibited, variously, by complexity, cost, or low update rate.
Chen, Wen-Ming; de Faria, Sergio M.; Straliotto, Rosângela; Pitard, Rosa M.; Simões-Araùjo, Jean L.; Chou, Jui-Hsing; Chou, Yi-Ju; Barrios, Edmundo; Prescott, Alan R.; Elliott, Geoffrey N.; Sprent, Janet I.; Young, J. Peter W.; James, Euan K.
2005-01-01
Twenty Mimosa-nodulating bacterial strains from Brazil and Venezuela, together with eight reference Mimosa-nodulating rhizobial strains and two other β-rhizobial strains, were examined by amplified rRNA gene restriction analysis. They fell into 16 patterns and formed a single cluster together with the known β-rhizobia, Burkholderia caribensis, Burkholderia phymatum, and Burkholderia tuberum. The 16S rRNA gene sequences of 15 of the 20 strains were determined, and all were shown to belong to the genus Burkholderia; four distinct clusters could be discerned, with strains isolated from the same host species usually clustering very closely. Five of the strains (MAP3-5, Br3407, Br3454, Br3461, and Br3469) were selected for further studies of the symbiosis-related genes nodA, the NodD-dependent regulatory consensus sequences (nod box), and nifH. The nodA and nifH sequences were very close to each other and to those of B. phymatum STM815, B. caribensis TJ182, and Cupriavidus taiwanensis LMG19424 but were relatively distant from those of B. tuberum STM678. In addition to nodulating their original hosts, all five strains could also nodulate other Mimosa spp., and all produced nodules on Mimosa pudica that had nitrogenase (acetylene reduction) activities and structures typical of effective N2-fixing symbioses. Finally, both wild-type and green fluorescent protein-expressing transconjugant strains of Br3461 and MAP3-5 produced N2-fixing nodules on their original hosts, Mimosa bimucronata (Br3461) and Mimosa pigra (MAP3-5), and hence this confirms strongly that Burkholderia strains can form effective symbioses with legumes. PMID:16269788
Chen, Wen-Ming; de Faria, Sergio M; Straliotto, Rosângela; Pitard, Rosa M; Simões-Araùjo, Jean L; Chou, Jui-Hsing; Chou, Yi-Ju; Barrios, Edmundo; Prescott, Alan R; Elliott, Geoffrey N; Sprent, Janet I; Young, J Peter W; James, Euan K
2005-11-01
Twenty Mimosa-nodulating bacterial strains from Brazil and Venezuela, together with eight reference Mimosa-nodulating rhizobial strains and two other beta-rhizobial strains, were examined by amplified rRNA gene restriction analysis. They fell into 16 patterns and formed a single cluster together with the known beta-rhizobia, Burkholderia caribensis, Burkholderia phymatum, and Burkholderia tuberum. The 16S rRNA gene sequences of 15 of the 20 strains were determined, and all were shown to belong to the genus Burkholderia; four distinct clusters could be discerned, with strains isolated from the same host species usually clustering very closely. Five of the strains (MAP3-5, Br3407, Br3454, Br3461, and Br3469) were selected for further studies of the symbiosis-related genes nodA, the NodD-dependent regulatory consensus sequences (nod box), and nifH. The nodA and nifH sequences were very close to each other and to those of B. phymatum STM815, B. caribensis TJ182, and Cupriavidus taiwanensis LMG19424 but were relatively distant from those of B. tuberum STM678. In addition to nodulating their original hosts, all five strains could also nodulate other Mimosa spp., and all produced nodules on Mimosa pudica that had nitrogenase (acetylene reduction) activities and structures typical of effective N2-fixing symbioses. Finally, both wild-type and green fluorescent protein-expressing transconjugant strains of Br3461 and MAP3-5 produced N2-fixing nodules on their original hosts, Mimosa bimucronata (Br3461) and Mimosa pigra (MAP3-5), and hence this confirms strongly that Burkholderia strains can form effective symbioses with legumes.
Piezoelectric effect in non-uniform strained carbon nanotubes
NASA Astrophysics Data System (ADS)
Ilina, M. V.; Blinov, Yu F.; Ilin, O. I.; Rudyk, N. N.; Ageev, O. A.
2017-10-01
The piezoelectric effect in non-uniform strained carbon nanotubes (CNTs) has been studied. It is shown that the magnitude of strained CNTs surface potential depends on a strain value. It is established that the resistance of CNT also depends on the strain and internal electric field, which leads to the hysteresis in the current-voltage characteristics. Analysis of experimental studies of the non-uniform strained CNT with a diameter of 92 nm and a height of 2.1 μm allowed us to estimate the piezoelectric coefficient 0.107 ± 0.032 C/m2.
Influences of misfit strains on liquid phase heteroepitaxial growth
NASA Astrophysics Data System (ADS)
Lu, Yanli; Peng, Yingying; Yu, Genggeng; Chen, Zheng
2017-10-01
Influences of misfit strains with different signs on liquid phase heteroepitaxial growth are studied by binary phase field crystal model. It is amazing to find that double islands are formed because of lateral and vertical separation. The morphological evolution of epitaxial layer depends on signs of misfit strains. The maximum atomic layer thickness of double islands under negative misfit strain is larger than that of under positive misfit strain at the same evolutional time, and size differences between light and dark islands is much smaller under negative misfit strain than that of under positive misfit strain. In addition, concentration field and density field approximately have similar variational law along x direction under the same misfit strain but show opposite variational trend under misfit strains with different signs. Generally, free energy of epitaxial growth systems keeps similar variational trend under misfit strains with different signs.
Phylogenetic relationship of Ornithobacterium rhinotracheale strains.
DE Oca-Jimenez, Roberto Montes; Vega-Sanchez, Vicente; Morales-Erasto, Vladimir; Salgado-Miranda, Celene; Blackall, Patrick J; Soriano-Vargas, Edgardo
2018-04-10
The bacterium Ornithobacterium rhinotracheale is associated with respiratory disease in wild birds and poultry. In this study, the phylogenetic analysis of nine reference strains of O. rhinotracheale belonging to serovars A to I, and eight Mexican isolates belonging to serovar A, was performed. The analysis was extended to include available sequences from another 23 strains available in the public domain. The analysis showed that the 40 sequences formed six clusters, I to VI. All eight Mexican field isolates were placed in cluster I. One of the reference strains appears to present genetic diversity not previously recognized and was placed in a new genetic cluster. In conclusion, the phylogenetic analysis of O. rhinotracheale strains, based on the 16S rRNA gene, is a suitable tool for epidemiologic studies.
Hospital strain colonization by Staphylococcus epidermidis.
Blum-Menezes, D; Bratfich, O J; Padoveze, M C; Moretti, M L
2009-03-01
The skin and mucous membranes of healthy subjects are colonized by strains of Staphylococcus epidermidis showing a high diversity of genomic DNA polymorphisms. Prolonged hospitalization and the use of invasive procedures promote changes in the microbiota with subsequent colonization by hospital strains. We report here a patient with prolonged hospitalization due to chronic pancreatitis who was treated with multiple antibiotics, invasive procedures and abdominal surgery. We studied the dynamics of skin colonization by S. epidermidis leading to the development of catheter-related infections and compared the genotypic profile of clinical and microbiota strains by pulsed field gel electrophoresis. During hospitalization, the normal S. epidermidis skin microbiota exhibiting a polymorphic genomic DNA profile was replaced with a hospital-acquired biofilm-producer S. epidermidis strain that subsequently caused repetitive catheter-related infections.
Simultaneous narrowband ultrasonic strain-flow imaging
NASA Astrophysics Data System (ADS)
Tsou, Jean K.; Mai, Jerome J.; Lupotti, Fermin A.; Insana, Michael F.
2004-04-01
We are summarizing new research aimed at forming spatially and temporally registered combinations of strain and color-flow images using echo data recorded from a commercial ultrasound system. Applications include diagnosis of vascular diseases and tumor malignancies. The challenge is to meet the diverse needs of each measurement. The approach is to first apply eigenfilters that separate echo components from moving tissues and blood flow, and then estimate blood velocity and tissue displacement from the filtered-IQ-signal phase modulations. At the cost of a lower acquisition frame rate, we find the autocorrelation strain estimator yields higher resolution strain estimate than the cross-correlator since estimates are made from ensembles at a single point in space. The technique is applied to in vivo carotid imaging, to demonstrate the sensitivity for strain-flow vascular imaging.
Leonard, Michael T; Valladares, Ricardo B; Ardissone, Alexandria; Gonzalez, Claudio F; Lorca, Graciela L; Triplett, Eric W
2014-05-08
We report here the complete genome sequences of Lactobacillus johnsonii strain N6.2, a homofermentative lactic acid intestinal bacterium, and Lactobacillus reuteri strain TD1, a heterofermentative lactic acid intestinal bacterium, both isolated from a type 1 diabetes-resistant rat model.
Tensile stress-strain behavior of graphite/epoxy laminates
NASA Technical Reports Server (NTRS)
Garber, D. P.
1982-01-01
The tensile stress-strain behavior of a variety of graphite/epoxy laminates was examined. Longitudinal and transverse specimens from eleven different layups were monotonically loaded in tension to failure. Ultimate strength, ultimate strain, and strss-strain curves wee obtained from four replicate tests in each case. Polynominal equations were fitted by the method of least squares to the stress-strain data to determine average curves. Values of Young's modulus and Poisson's ratio, derived from polynomial coefficients, were compared with laminate analysis results. While the polynomials appeared to accurately fit the stress-strain data in most cases, the use of polynomial coefficients to calculate elastic moduli appeared to be of questionable value in cases involving sharp changes in the slope of the stress-strain data or extensive scatter.
Strain-mediated mechanical coupling to diamond spins
NASA Astrophysics Data System (ADS)
Bleszynski Jayich, Ania
2015-03-01
Nitrogen-vacancy (NV) centers in diamond are atomic-scale spin systems with remarkable quantum properties that persist to room temperature. The recent demonstration of high-quality single-crystal diamond resonators has led to significant interest in a hybrid system consisting of NV spins that interact with the resonant phonon modes of a macroscopic mechanical resonator through crystal strain. We demonstrate dynamic, strain-mediated coupling of the mechanical motion of a diamond cantilever to the spin of an embedded NV. Via quantum control of the spin, we quantitatively characterize the axial and transverse strain sensitivities of the nitrogen-vacancy ground-state spin. The nitrogen-vacancy center is an atomic scale sensor and we demonstrate spin-based strain imaging with a strain sensitivity of 3x10-6 strain Hz1/2. We discuss prospects for reaching the regime of quantum coupling between phonons and spins, and we present our results in this direction. This hybrid system has exciting prospects for a phonon-based approach to integrating NVs into quantum networks. Funding from the AFOSR MURI and NSF CAREER programs are gratefully acknowledged.
Species-specific identification of commercial probiotic strains.
Yeung, P S M; Sanders, M E; Kitts, C L; Cano, R; Tong, P S
2002-05-01
Products containing probiotic bacteria are gaining popularity, increasing the importance of their accurate speciation. Unfortunately, studies have suggested that improper labeling of probiotic species is common in commercial products. Species identification of a bank of commercial probiotic strains was attempted using partial 16S rDNA sequencing, carbohydrate fermentation analysis, and cellular fatty acid methyl ester analysis. Results from partial 16S rDNA sequencing indicated discrepancies between species designations for 26 out of 58 strains tested, including two ATCC Lactobacillus strains. When considering only the commercial strains obtained directly from the manufacturers, 14 of 29 strains carried species designations different from those obtained by partial 16S rDNA sequencing. Strains from six commercial products were species not listed on the label. The discrepancies mainly occurred in Lactobacillus acidophilus and Lactobacillus casei groups. Carbohydrate fermentation analysis was not sensitive enough to identify species within the L. acidophilus group. Fatty acid methyl ester analysis was found to be variable and inaccurate and is not recommended to identify probiotic lactobacilli.
Apparent-Strain Correction for Combined Thermal and Mechanical Testing
NASA Technical Reports Server (NTRS)
Johnson, Theodore F.; O'Neil, Teresa L.
2007-01-01
Combined thermal and mechanical testing requires that the total strain be corrected for the coefficient of thermal expansion mismatch between the strain gage and the specimen or apparent strain when the temperature varies while a mechanical load is being applied. Collecting data for an apparent strain test becomes problematic as the specimen size increases. If the test specimen cannot be placed in a variable temperature test chamber to generate apparent strain data with no mechanical loads, coupons can be used to generate the required data. The coupons, however, must have the same strain gage type, coefficient of thermal expansion, and constraints as the specimen to be useful. Obtaining apparent-strain data at temperatures lower than -320 F is challenging due to the difficulty to maintain steady-state and uniform temperatures on a given specimen. Equations to correct for apparent strain in a real-time fashion and data from apparent-strain tests for composite and metallic specimens over a temperature range from -450 F to +250 F are presented in this paper. Three approaches to extrapolate apparent-strain data from -320 F to -430 F are presented and compared to the measured apparent-strain data. The first two approaches use a subset of the apparent-strain curves between -320 F and 100 F to extrapolate to -430 F, while the third approach extrapolates the apparent-strain curve over the temperature range of -320 F to +250 F to -430 F. The first two approaches are superior to the third approach but the use of either of the first two approaches is contingent upon the degree of non-linearity of the apparent-strain curve.
Strain superlattices in graphene
NASA Astrophysics Data System (ADS)
Zhang, Yingjie; Kim, Youngseok; Lyding, Joseph; Gilbert, Matthew; Mason, Nadya
Superlattices have been widely explored to tailor the electronic properties of two-dimensional electron systems. Previous approaches to create superlattices have been limited to periodic potential modulations, either in the form of electrostatic gating or moiré heterostructures. Here we present a new strategy to generate superlattices in 2D materials. We deposit these 2D membranes on a periodic array of dielectric nanospheres, and achieve superlattices with periodic strain modulations. We studied the electronic and magneto-transport properties of strained graphene superlattices, and observed salient features of Dirac point cloning and Hofstadter's butterfly. Furthermore, we were able to tune the transport properties by changing the magnitude of strain in the graphene superlattice. This new degree of freedom provides a novel platform both for fundamental studies of 2D electron correlations and for prospective applications in 2D electronic devices. Y.Z. and N.M. acknowledge support from the National Science Foundation under Grant No. ENG-1434147.
Strain-Detecting Composite Materials
NASA Technical Reports Server (NTRS)
Wallace, Terryl A. (Inventor); Smith, Stephen W. (Inventor); Piascik, Robert S. (Inventor); Horne, Michael R. (Inventor); Messick, Peter L. (Inventor); Alexa, Joel A. (Inventor); Glaessgen, Edward H. (Inventor); Hailer, Benjamin T. (Inventor)
2016-01-01
A composite material includes a structural material and a shape-memory alloy embedded in the structural material. The shape-memory alloy changes crystallographic phase from austenite to martensite in response to a predefined critical macroscopic average strain of the composite material. In a second embodiment, the composite material includes a plurality of particles of a ferromagnetic shape-memory alloy embedded in the structural material. The ferromagnetic shape-memory alloy changes crystallographic phase from austenite to martensite and changes magnetic phase in response to the predefined critical macroscopic average strain of the composite material. A method of forming a composite material for sensing the predefined critical macroscopic average strain includes providing the shape-memory alloy having an austenite crystallographic phase, changing a size and shape of the shape-memory alloy to thereby form a plurality of particles, and combining the structural material and the particles at a temperature of from about 100-700.degree. C. to form the composite material.
Sun, Junying; Bingga, Gali; Liu, Zhicheng; Zhang, Chunhong; Shen, Haiyan; Guo, Pengju; Zhang, Jianfeng
2018-06-01
Differentiation of classical strains and highly pathogenic strains of porcine reproductive and respiratory syndrome virus is crucial for effective vaccination programs and epidemiological studies. We used nested PCR and high resolution melting curve analysis with unlabeled probe to distinguish between the classical and the highly pathogenic strains of this virus. Two sets of primers and a 20 bp unlabeled probe were designed from the NSP3 gene. The unlabeled probe included two mutations specific for the classical and highly pathogenic strains of the virus. An additional primer set from the NSP2 gene of the highly pathogenic vaccine strain JXA1-R was used to detect its exclusive single nucleotide polymorphism. We tested 107 clinical samples, 21 clinical samples were positive for PRRSV (consistent with conventional PCR assay), among them four were positive for the classical strain with the remainder 17 for the highly pathogenic strain. Around 10 °C difference between probe melting temperatures showed the high discriminatory power of this method. Among highly pathogenic positive samples, three samples were determined as positive for JXA1-R vaccine-related strain with a 95% genotype confidence percentage. All these genotyping results using the high resolution melting curve assay were confirmed with DNA sequencing. This unlabeled probe method provides an alternative means to differentiate the classical strains from the highly pathogenic porcine reproductive and respiratory syndrome virus strains rapidly and accurately. Copyright © 2018. Published by Elsevier Ltd.
Shear, principal, and equivalent strains in equal-channel angular deformation
NASA Astrophysics Data System (ADS)
Xia, K.; Wang, J.
2001-10-01
The shear and principal strains involved in equal channel angular deformation (ECAD) were analyzed using a variety of methods. A general expression for the total shear strain calculated by integrating infinitesimal strain increments gave the same result as that from simple geometric considerations. The magnitude and direction of the accumulated principal strains were calculated based on a geometric and a matrix algebra method, respectively. For an intersecting angle of π/2, the maximum normal strain is 0.881 in the direction at π/8 (22.5 deg) from the longitudinal direction of the material in the exit channel. The direction of the maximum principal strain should be used as the direction of grain elongation. Since the principal direction of strain rotates during ECAD, the total shear strain and principal strains so calculated do not have the same meaning as those in a strain tensor. Consequently, the “equivalent” strain based on the second invariant of a strain tensor is no longer an invariant. Indeed, the equivalent strains calculated using the total shear strain and that using the total principal strains differed as the intensity of deformation increased. The method based on matrix algebra is potentially useful in mathematical analysis and computer calculation of ECAD.
[Enhancement of laccase activity by combining white rot fungal strains].
He, Rong-yu; Liu, Xiao-feng; Yan, Zhi-ying; Yuan, Yue-xiang; Liao, Yin-zhang; Li, Xu-dong
2010-02-01
The method of combining white rot fungal strains was used to enhance laccase activity, and the interaction mechanism between strains was also studied. The laccase activity of combined fungi of strain 55 (Trametes trogii) and strain m-6 (Trametes versicolor) were 24.13 and 4.07-fold higher than that of strain 55 and strain m-6, respectively. No inhibitory effect was observed when the two strains were co-cultivated. On plate cultivation, there was hyphal interference in the contact area, where laccase activity was the highest followed by brown pigmentation. In liquid cultivation, strain m-6 played much more important role on enhancement of laccase activity, and the laccase activity of strain 55 by adding strain m-6 was 7.03-fold higher than that of strain m-6 by adding strain 55, furthermore, filter sterilized- and high temperature autoclaved-extracellular substances of strain m-6 could also stimulate strain 55 to excrete more laccase, which led to 6.79-fold and 4. 60-fold increase in laccase activity by adding 20 mL, respectively. The native staining results of Native-PAGE showed that the types of laccase isozymes were not changed when strains were co-cultured, but the concentration of three types increased.
Nakamura, Toshihide; Sekiyama, Yasuyo; Kikuchi, Jun
2017-01-01
In this study, we investigated the applicability of NMR-based metabolomics to discriminate strain-dependent fermentation characteristics of lactic acid bacteria (LAB), which are important microorganisms for fermented food production. To evaluate the discrimination capability, six type strains of Lactobacillus species and six additional L. brevis strains were used focusing on i) the difference between homo- and hetero-lactic fermentative species and ii) strain-dependent characteristics within L. brevis. Based on the differences in the metabolite profiles of fermented vegetable juices, non-targeted principal component analysis (PCA) clearly separated the samples into those inoculated with homo- and hetero-lactic fermentative species. The separation was primarily explained by the different levels of dominant metabolites (lactic acid, acetic acid, ethanol, and mannitol). Orthogonal partial least squares discrimination analysis, based on a regions-of-interest (ROIs) approach, revealed the contribution of low-abundance metabolites: acetoin, phenyllactic acid, p-hydroxyphenyllactic acid, glycerophosphocholine, and succinic acid for homolactic fermentation; and ornithine, tyramine, and γ-aminobutyric acid (GABA) for heterolactic fermentation. Furthermore, ROIs-based PCA of seven L. brevis strains separated their strain-dependent fermentation characteristics primarily based on their ability to utilize sucrose and citric acid, and convert glutamic acid and tyrosine into GABA and tyramine, respectively. In conclusion, NMR metabolomics successfully discriminated the fermentation characteristics of the tested strains and provided further information on metabolites responsible for these characteristics, which may impact the taste, aroma, and functional properties of fermented foods. PMID:28759594
Kim, Eun Bae
2014-01-01
Certain strains of Enterococcus faecium and Enterococcus faecalis contribute beneficially to animal health and food production, while others are associated with nosocomial infections. To determine whether there are structural and functional genomic features that are distinct between nonclinical (NC) and clinical (CL) strains of those species, we analyzed the genomes of 31 E. faecium and 38 E. faecalis strains. Hierarchical clustering of 7,017 orthologs found in the E. faecium pangenome revealed that NC strains clustered into two clades and are distinct from CL strains. NC E. faecium genomes are significantly smaller than CL genomes, and this difference was partly explained by significantly fewer mobile genetic elements (ME), virulence factors (VF), and antibiotic resistance (AR) genes. E. faecium ortholog comparisons identified 68 and 153 genes that are enriched for NC and CL strains, respectively. Proximity analysis showed that CL-enriched loci, and not NC-enriched loci, are more frequently colocalized on the genome with ME. In CL genomes, AR genes are also colocalized with ME, and VF are more frequently associated with CL-enriched loci. Genes in 23 functional groups are also differentially enriched between NC and CL E. faecium genomes. In contrast, differences were not observed between NC and CL E. faecalis genomes despite their having larger genomes than E. faecium. Our findings show that unlike E. faecalis, NC and CL E. faecium strains are equipped with distinct structural and functional genomic features indicative of adaptation to different environments. PMID:24141120
Geometric reconstruction using tracked ultrasound strain imaging
NASA Astrophysics Data System (ADS)
Pheiffer, Thomas S.; Simpson, Amber L.; Ondrake, Janet E.; Miga, Michael I.
2013-03-01
The accurate identification of tumor margins during neurosurgery is a primary concern for the surgeon in order to maximize resection of malignant tissue while preserving normal function. The use of preoperative imaging for guidance is standard of care, but tumor margins are not always clear even when contrast agents are used, and so margins are often determined intraoperatively by visual and tactile feedback. Ultrasound strain imaging creates a quantitative representation of tissue stiffness which can be used in real-time. The information offered by strain imaging can be placed within a conventional image-guidance workflow by tracking the ultrasound probe and calibrating the image plane, which facilitates interpretation of the data by placing it within a common coordinate space with preoperative imaging. Tumor geometry in strain imaging is then directly comparable to the geometry in preoperative imaging. This paper presents a tracked ultrasound strain imaging system capable of co-registering with preoperative tomograms and also of reconstructing a 3D surface using the border of the strain lesion. In a preliminary study using four phantoms with subsurface tumors, tracked strain imaging was registered to preoperative image volumes and then tumor surfaces were reconstructed using contours extracted from strain image slices. The volumes of the phantom tumors reconstructed from tracked strain imaging were approximately between 1.5 to 2.4 cm3, which was similar to the CT volumes of 1.0 to 2.3 cm3. Future work will be done to robustly characterize the reconstruction accuracy of the system.
Anisotropic nature of radially strained metal tubes
NASA Astrophysics Data System (ADS)
Strickland, Julie N.
Metal pipes are sometimes swaged by a metal cone to enlarge them, which increases the strain in the material. The amount of strain is important because it affects the burst and collapse strength. Burst strength is the amount of internal pressure that a pipe can withstand before failure, while collapse strength is the amount of external pressure that a pipe can withstand before failure. If the burst or collapse strengths are exceeded, the pipe may fracture, causing critical failure. Such an event could cost the owners and their customers millions of dollars in clean up, repair, and lost time, in addition to the potential environmental damage. Therefore, a reliable way of estimating the burst and collapse strength of strained pipe is desired and valuable. The sponsor currently rates strained pipes using the properties of raw steel, because those properties are easily measured (for example, yield strength). In the past, the engineers assumed that the metal would be work-hardened when swaged, so that yield strength would increase. However, swaging introduces anisotropic strain, which may decrease the yield strength. This study measured the yield strength of strained material in the transverse and axial direction and compared them to raw material, to determine the amount of anisotropy. This information will be used to more accurately determine burst and collapse ratings for strained pipes. More accurate ratings mean safer products, which will minimize risk for the sponsor's customers. Since the strained metal has a higher yield strength than the raw material, using the raw yield strength to calculate burst and collapse ratings is a conservative method. The metal has even higher yield strength after strain aging, which indicates that the stresses are relieved. Even with the 12% anisotropy in the strained and 9% anisotropy in the strain aged specimens, the raw yield strengths are lower and therefore more conservative. I recommend that the sponsor continue using the raw
NASA Astrophysics Data System (ADS)
Cox, Brian N.; Snead, Malcolm L.
2016-02-01
We argue in favor of representing living cells as automata and review demonstrations that autonomous cells can form patterns by responding to local variations in the strain fields that arise from their individual or collective motions. An autonomous cell's response to strain stimuli is assumed to be effected by internally-generated, internally-powered forces, which generally move the cell in directions other than those implied by external energy gradients. Evidence of cells acting as strain-cued automata have been inferred from patterns observed in nature and from experiments conducted in vitro. Simulations that mimic particular cases of pattern forming share the idealization that cells are assumed to pass information among themselves solely via mechanical boundary conditions, i.e., the tractions and displacements present at their membranes. This assumption opens three mechanisms for pattern formation in large cell populations: wavelike behavior, kinematic feedback in cell motility that can lead to sliding and rotational patterns, and directed migration during invasions. Wavelike behavior among ameloblast cells during amelogenesis (the formation of dental enamel) has been inferred from enamel microstructure, while strain waves in populations of epithelial cells have been observed in vitro. One hypothesized kinematic feedback mechanism, "enhanced shear motility", accounts successfully for the spontaneous formation of layered patterns during amelogenesis in the mouse incisor. Directed migration is exemplified by a theory of invader cells that sense and respond to the strains they themselves create in the host population as they invade it: analysis shows that the strain fields contain positional information that could aid the formation of cell network structures, stabilizing the slender geometry of branches and helping govern the frequency of branch bifurcation and branch coalescence (the formation of closed networks). In simulations of pattern formation in
Construction of an Optical Fiber Strain Gauge
NASA Astrophysics Data System (ADS)
Sulaiman, Najwa
This project is focused on the construction of an optical fiber strain gauge that is based on a strain gauge described by Butter and Hocker. Our gauge is designed to generate an interference pattern from the signals carried on two bare single-mode fibers that are fastened to an aluminum cantilever. When the cantilever experiences flexural stress, the interference pattern should change. By observing this change, it is possible to determine the strain experienced by the cantilever. I describe the design and construction of our optical fiber strain gauge as well as the characterization of different parts of the apparatus.
Cardiac biplane strain imaging: initial in vivo experience
NASA Astrophysics Data System (ADS)
Lopata, R. G. P.; Nillesen, M. M.; Verrijp, C. N.; Singh, S. K.; Lammens, M. M. Y.; van der Laak, J. A. W. M.; van Wetten, H. B.; Thijssen, J. M.; Kapusta, L.; de Korte, C. L.
2010-02-01
In this study, first we propose a biplane strain imaging method using a commercial ultrasound system, yielding estimation of the strain in three orthogonal directions. Secondly, an animal model of a child's heart was introduced that is suitable to simulate congenital heart disease and was used to test the method in vivo. The proposed approach can serve as a framework to monitor the development of cardiac hypertrophy and fibrosis. A 2D strain estimation technique using radio frequency (RF) ultrasound data was applied. Biplane image acquisition was performed at a relatively low frame rate (<100 Hz) using a commercial platform with an RF interface. For testing the method in vivo, biplane image sequences of the heart were recorded during the cardiac cycle in four dogs with an aortic stenosis. Initial results reveal the feasibility of measuring large radial, circumferential and longitudinal cumulative strain (up to 70%) at a frame rate of 100 Hz. Mean radial strain curves of a manually segmented region-of-interest in the infero-lateral wall show excellent correlation between the measured strain curves acquired in two perpendicular planes. Furthermore, the results show the feasibility and reproducibility of assessing radial, circumferential and longitudinal strains simultaneously. In this preliminary study, three beagles developed an elevated pressure gradient over the aortic valve (Δp: 100-200 mmHg) and myocardial hypertrophy. One dog did not develop any sign of hypertrophy (Δp = 20 mmHg). Initial strain (rate) results showed that the maximum strain (rate) decreased with increasing valvular stenosis (-50%), which is in accordance with previous studies. Histological findings corroborated these results and showed an increase in fibrotic tissue for the hearts with larger pressure gradients (100, 200 mmHg), as well as lower strain and strain rate values.
A strain-cue hypothesis for biological network formation
Cox, Brian N.
2011-01-01
The direction of migration of a cell invading a host population is assumed to be controlled by the magnitude of the strains in the host medium (cells plus extracellular matrix) that arise as the host medium deforms to accommodate the invader. The single assumption that invaders are cued by strains external to themselves is sufficient to generate network structures. The strain induced by a line of invaders is greatest at the extremity of the line and thus the strain field breaks symmetry, stabilizing branch formation. The strain cue also triggers sprouting from existing branches, with no further model assumption. Network characteristics depend primarily on the ratio of the rate of advance of the invaders to the rate of relaxation of the host cells after their initial deformation. Intra-cell mechanisms that govern these two rates control network morphology. The strain field that cues an individual invader is a collective response of the combined cell populations, involving the nearest 100 cells, to order of magnitude, to any invader. The mechanism does not rely on the pre-existence of the entire host medium prior to invasion; the host cells need only maintain a layer several cells thick around each invader. Consistent with recent experiments, networks result only from a strain cue that is based on strain magnitudes. Spatial strain gradients do not break symmetry and therefore cannot stabilize branch formation. The theory recreates most of the geometrical features of the nervous network in the mouse gut when the most influential adjustable parameter takes a value consistent with one inferred from human and mouse amelogenesis. Because of similarity in the guiding local strain fields, strain cues could also be a participating factor in the formation of vascular networks. PMID:20671068
High-Temperature Strain Sensing for Aerospace Applications
NASA Technical Reports Server (NTRS)
Piazza, Anthony; Richards, Lance W.; Hudson, Larry D.
2008-01-01
Thermal protection systems (TPS) and hot structures are utilizing advanced materials that operate at temperatures that exceed abilities to measure structural performance. Robust strain sensors that operate accurately and reliably beyond 1800 F are needed but do not exist. These shortcomings hinder the ability to validate analysis and modeling techniques and hinders the ability to optimize structural designs. This presentation examines high-temperature strain sensing for aerospace applications and, more specifically, seeks to provide strain data for validating finite element models and thermal-structural analyses. Efforts have been made to develop sensor attachment techniques for relevant structural materials at the small test specimen level and to perform laboratory tests to characterize sensor and generate corrections to apply to indicated strains. Areas highlighted in this presentation include sensors, sensor attachment techniques, laboratory evaluation/characterization of strain measurement, and sensor use in large-scale structures.
Rychli, Kathrin; Müller, Anneliese; Zaiser, Andreas; Schoder, Dagmar; Allerberger, Franz; Wagner, Martin; Schmitz-Esser, Stephan
2014-01-01
A large listeriosis outbreak occurred in Austria, Germany and the Czech Republic in 2009 and 2010. The outbreak was traced back to a traditional Austrian curd cheese called “Quargel” which was contaminated with two distinct serovar 1/2a Listeria monocytogenes strains (QOC1 and QOC2). In this study we sequenced and analysed the genomes of both outbreak strains in order to investigate the extent of genetic diversity between the two strains belonging to MLST sequence types 398 (QOC2) and 403 (QOC1). Both genomes are highly similar, but also display distinct properties: The QOC1 genome is approximately 74 kbp larger than the QOC2 genome. In addition, the strains harbour 93 (QOC1) and 45 (QOC2) genes encoding strain-specific proteins. A 21 kbp region showing highest similarity to plasmid pLMIV encoding three putative internalins is integrated in the QOC1 genome. In contrast to QOC1, strain QOC2 harbours a vip homologue, which encodes a LPXTG surface protein involved in cell invasion. In accordance, in vitro virulence assays revealed distinct differences in invasion efficiency and intracellular proliferation within different cell types. The higher virulence potential of QOC1 in non-phagocytic cells may be explained by the presence of additional internalins in the pLMIV-like region, whereas the higher invasion capability of QOC2 into phagocytic cells may be due to the presence of a vip homologue. In addition, both strains show differences in stress-related gene content. Strain QOC1 encodes a so-called stress survival islet 1, whereas strain QOC2 harbours a homologue of the uncharacterized LMOf2365_0481 gene. Consistently, QOC1 shows higher resistance to acidic, alkaline and gastric stress. In conclusion, our results show that strain QOC1 and QOC2 are distinct and did not recently evolve from a common ancestor. PMID:24587155
Näyhä, Simo; Kivastik, Jana; Kingisepp, Peet-Henn; Heikkinen, Rauno
2011-03-08
A previous study found marked differences in smoking between employees in various university faculties in Tartu, Estonia, soon after the disruption of communism. The present study was conducted to see whether such differences still exist and how the patterns had changed during the country's first transitional decade. All employees at the University of Tartu (UT) were surveyed for smoking habits by means of a questionnaire in 1992 and 2003. The present paper is based on respondents whose faculty or workplace was known (1390 people in 1992, 1790 in 2003). Smoking differences were assessed in terms of regression-based adjusted figures. While 20% of the male employees smoked daily in 1992, 13% did so in 2003, the figures for females being 10% and 7%, respectively. The prevalence of men's daily smoking varied between faculties and other workplaces in the range 4-30% in 1992, and 0-24% in 2003, with corresponding ranges of 3-21% and 0-10% among females. Men in the medical faculty in both surveys, and those in the faculty of philosophy in the second survey showed higher rates than men in most other faculties, as did women in the faculty of law in the first survey and those in the faculty of philosophy in the second. The figures were usually low in the faculties of sports & exercise, physics & chemistry and mathematics. The sex pattern was reversed in the faculty of law and also in that of economics, where the women smoked more than the men. Even in this low-smoking academic community, wide smoking differences existed between the faculties and other workplaces. Faculties where physical or mental performance is of prime importance are leading the way towards a smoke-free community, while men in the faculty of philosophy and, paradoxically, men in the medical faculty are lagging behind. The reversed sex ratio in the faculties of law and economics may indicate women's intensified drive for equality in this transitional society. We assume that different professional cultures
Bland, Michael T.; McKinnon, W. B.
2015-01-01
The ubiquity of tectonic features formed in extension, and the apparent absence of ones formed in contraction, has led to the hypothesis that Ganymede has undergone global expansion in its past. Determining the magnitude of such expansion is challenging however, and extrapolation of locally or regionally inferred strains to global scales often results in strain estimates that exceed those based on global constraints. Here we use numerical simulations of groove terrain formation to develop a strain history for Ganymede that is generally consistent at local, regional, and global scales. These simulations reproduce groove-like amplitudes, wavelengths, and average slopes at modest regional extensions (10–15%). The modest strains are more consistent with global constraints on Ganymede’s expansion. Yet locally, we also find that surface strains can be much larger (30–60%) in the same simulations, consistent with observations of highly-extended impact craters. Thus our simulations satisfy both the smallest-scale and largest-scale inferences of strain on Ganymede. The growth rate of the topography is consistent with (or exceeds) predictions of analytical models, and results from the use of a non-associated plastic rheology that naturally permits localization of brittle failure (plastic strain) into linear fault-like shear zones. These fault-like zones are organized into periodically-spaced graben-like structures with stepped, steeply-dipping faults. As in previous work, groove amplitudes and wavelengths depend on both the imposed heat flux and surface temperature, but because our brittle strength increases with depth, we find (for the parameters explored) that the growth rate of topography is initially faster for lower heat flows. We observe a transition to narrow rifting for higher heat flows and larger strains, which is a potential pathway for breakaway margin or band formation.
Premixed Edge-Flames in Spatially-Varying Straining Flows
NASA Technical Reports Server (NTRS)
Liu, Jian-Bang; Ronney, Paul D.
1999-01-01
Flames subject to temporally and spatially uniform hydrodynamic strain are frequently used to model the local interactions of flame fronts with turbulent flow fields (Williams, 1985; Peters, 1986; Bradley, 1992). The applicability of laminar flamelet models in strongly turbulent flows have been questioned recently (Shay and Ronney, 1998) because in turbulent flows the strain rate (sigma) changes at rates comparable to sigma itself and the scale over which the flame front curvature and sigma changes is comparable to the curvature scale itself. Therefore quasi-static, local models of turbulent strain and curvature effects on laminar flamelets may not be accurate under conditions where the strain and curvature effects are most significant. The purpose of this study is to examine flames in spatially-varying strain and compare their properties to those of uniformly strained flames.
Flexible Bond Wire Capacitive Strain Sensor for Vehicle Tyres
Cao, Siyang; Pyatt, Simon; Anthony, Carl J.; Kubba, Ammar I.; Kubba, Ali E.; Olatunbosun, Oluremi
2016-01-01
The safety of the driving experience and manoeuvrability of a vehicle can be improved by detecting the strain in tyres. To measure strain accurately in rubber, the strain sensor needs to be flexible so that it does not deform the medium that it is measuring. In this work, a novel flexible bond wire capacitive strain sensor for measuring the strain in tyres is developed, fabricated and calibrated. An array of 25 micron diameter wire bonds in an approximately 8 mm × 8 mm area is built to create an interdigitated structure, which consists of 50 wire loops resulting in 49 capacitor pairs in parallel. Laser machining was used to pattern copper on a flexible printed circuit board PCB to make the bond pads for the wire attachment. The wire array was finally packaged and embedded in polydimethylsiloxane (PDMS), which acts as the structural material that is strained. The capacitance of the device is in a linear like relationship with respect to the strain, which can measure the strain up to at least ±60,000 micro-strain (±6%) with a resolution of ~132 micro-strain (0.013%). In-tyre testing under static loading has shown the ability of the sensor to measure large tyre strains. The technology used for sensor fabrication lends itself to mass production and so the design is considered to be consistent with low cost commercialisable strain sensing technology. PMID:27338402
Flexible Bond Wire Capacitive Strain Sensor for Vehicle Tyres.
Cao, Siyang; Pyatt, Simon; Anthony, Carl J; Kubba, Ammar I; Kubba, Ali E; Olatunbosun, Oluremi
2016-06-21
The safety of the driving experience and manoeuvrability of a vehicle can be improved by detecting the strain in tyres. To measure strain accurately in rubber, the strain sensor needs to be flexible so that it does not deform the medium that it is measuring. In this work, a novel flexible bond wire capacitive strain sensor for measuring the strain in tyres is developed, fabricated and calibrated. An array of 25 micron diameter wire bonds in an approximately 8 mm × 8 mm area is built to create an interdigitated structure, which consists of 50 wire loops resulting in 49 capacitor pairs in parallel. Laser machining was used to pattern copper on a flexible printed circuit board PCB to make the bond pads for the wire attachment. The wire array was finally packaged and embedded in polydimethylsiloxane (PDMS), which acts as the structural material that is strained. The capacitance of the device is in a linear like relationship with respect to the strain, which can measure the strain up to at least ±60,000 micro-strain (±6%) with a resolution of ~132 micro-strain (0.013%). In-tyre testing under static loading has shown the ability of the sensor to measure large tyre strains. The technology used for sensor fabrication lends itself to mass production and so the design is considered to be consistent with low cost commercialisable strain sensing technology.
Life-course Financial Strain and Health in African-Americans
Thorpe, Roland J; Whitfield, Keith E
2010-01-01
Differential exposure to financial strain may explain some differences in population health. However, few studies have examined the cumulative health effect of financial strain across the life-course. Studies that have are limited to self-reported health measures. Our objective was to examine the associations between childhood, adulthood, and life-course, or cumulative, financial strain with disability, lung function, cognition, and depression. In a population-based cross-sectional cohort study of adult African-American twins enrolled in the US Carolina African American Twin Study of Aging (CAATSA), we found that participants who reported financial strain as children and as adults are more likely to be physically disabled, and report more depressive symptoms than their unstrained counterparts. Participants who reported childhood financial strain had lower cognitive functioning than those with no childhood financial strain. We were unable to detect a difference in lung function beyond the effect of actual income and education in those who reported financial strain compared to those who did not. Financial strain in adulthood was more consistently associated with poor health than was childhood financial strain, a finding that suggests targeting adult financial strain could help prevent disability and depression among African-American adults. PMID:20452712
Thoracolumbar spinal ligaments exhibit negative and transverse pre-strain.
Robertson, Daniel J; Von Forell, Gregory A; Alsup, Jeremy; Bowden, Anton E
2013-07-01
The present work represents the first reported bi-axial spinal ligament pre-strain data for the thoracic and lumbar spine. Ligament pre-strain (in-situ strain) is known to significantly alter joint biomechanics. However, there is currently a lack of comprehensive data with regards to spinal ligament pre-strain. The current work determined the pre-strain of 71 spinal ligaments (30 anterior longitudinal ligaments, 27 supraspinous ligaments and 14 interspinous ligaments). The interspinous ligament and the anterior longitudinal ligament exhibited bi-axial pre-strain distributions, demonstrating they are not uniaxial structures. The supraspinous ligament frequently exhibited large amounts of negative pre-strain or laxity suggesting it makes no mechanical contribution to spinal stability near the neutral posture. Upon implementing multi-axial pre-strain results into a finite element model of the lumbar spine, large differences in spinal biomechanics were observed. These results demonstrate the necessity of accounting for ligament pre-strain in biomechanical models. In addition, the authors present a unique experimental method for obtaining ligament pre-strain that presents a number of advantages when compared to standard techniques. Copyright © 2013 Elsevier Ltd. All rights reserved.
Antimicrobial activity of lactobacillus strains against uropathogens.
Shim, Yoon Hee; Lee, Seung Joo; Lee, Jung Won
2016-10-01
The use of lactobacillus probiotics has been proposed as an alternative to prophylactic antibiotics for preventing urinary tract infection (UTI) in the era of antibiotic resistance. In this study, the antimicrobial activity of lactobacillus strains against uropathogens, was evaluated and compared with that of antibiotics. To evaluate inhibitory activities of lactobacilli against uropathogens, six lactobacillus strains (L. gasseri, L. rhamnosus, L. acidophilus, L. plantarum, L. paracasei, L. acidophilus) and four representative uropathogens of infantile UTI (extended-spectrum beta-lactamase [ESBL](-) Escherichia coli, ESBL(+) E. coli, Proteus vulgaris, Enterococcus fecalis) were selected. Lactobacillus strain in vitro inhibition of each uropathogen was evaluated on MRS agar well diffusion assay and compared with that of commercial antibiotic discs. Average inhibitory zone for each of the six lactobacillus strains against the four uropathogens showed slightly different but consistent inhibition (inhibitory zone diameter, 10.5-20.0 mm). This was different to that of the antibiotic discs, which had a wider range of inhibition (inhibitory zone diameter, <6.0-27.5 mm) depending on the uropathogen resistance pattern. The inhibitory zone of the six lactobacillus strains was between that of sensitive and resistant antibiotics (P < 0.05). Lactobacillus strains had similar moderate antimicrobial activities against uropathogens. Further research is needed to ascertain the strains with the best probiotic potential. © 2016 Japan Pediatric Society.
High-Strain-Rate Compression Testing of Ice
NASA Technical Reports Server (NTRS)
Shazly, Mostafa; Prakash, Vikas; Lerch, Bradley A.
2006-01-01
In the present study a modified split Hopkinson pressure bar (SHPB) was employed to study the effect of strain rate on the dynamic material response of ice. Disk-shaped ice specimens with flat, parallel end faces were either provided by Dartmouth College (Hanover, NH) or grown at Case Western Reserve University (Cleveland, OH). The SHPB was adapted to perform tests at high strain rates in the range 60 to 1400/s at test temperatures of -10 and -30 C. Experimental results showed that the strength of ice increases with increasing strain rates and this occurs over a change in strain rate of five orders of magnitude. Under these strain rate conditions the ice microstructure has a slight influence on the strength, but it is much less than the influence it has under quasi-static loading conditions. End constraint and frictional effects do not influence the compression tests like they do at slower strain rates, and therefore the diameter/thickness ratio of the samples is not as critical. The strength of ice at high strain rates was found to increase with decreasing test temperatures. Ice has been identified as a potential source of debris to impact the shuttle; data presented in this report can be used to validate and/or develop material models for ice impact analyses for shuttle Return to Flight efforts.
Beck, Andrew; Tesh, Robert B; Wood, Thomas G; Widen, Steven G; Ryman, Kate D; Barrett, Alan D T
2014-02-01
The first comparison of a live RNA viral vaccine strain to its wild-type parental strain by deep sequencing is presented using as a model the yellow fever virus (YFV) live vaccine strain 17D-204 and its wild-type parental strain, Asibi. The YFV 17D-204 vaccine genome was compared to that of the parental strain Asibi by massively parallel methods. Variability was compared on multiple scales of the viral genomes. A modeled exploration of small-frequency variants was performed to reconstruct plausible regions of mutational plasticity. Overt quasispecies diversity is a feature of the parental strain, whereas the live vaccine strain lacks diversity according to multiple independent measurements. A lack of attenuating mutations in the Asibi population relative to that of 17D-204 was observed, demonstrating that the vaccine strain was derived by discrete mutation of Asibi and not by selection of genomes in the wild-type population. Relative quasispecies structure is a plausible correlate of attenuation for live viral vaccines. Analyses such as these of attenuated viruses improve our understanding of the molecular basis of vaccine attenuation and provide critical information on the stability of live vaccines and the risk of reversion to virulence.
Strain Hardening of Hadfield Manganese Steel
NASA Astrophysics Data System (ADS)
Adler, P. H.; Olson, G. B.; Owen, W. S.
1986-10-01
The plastic flow behavior of Hadfield manganese steel in uniaxial tension and compression is shown to be greatly influenced by transformation plasticity phenomena. Changes in the stress-strain (σ-ɛ) curves with temperature correlate with the observed extent of deformation twinning, consistent with a softening effect of twinning as a deformation mechanism and a hardening effect of the twinned microstructure. The combined effects give upward curvature to the σ-ɛ curve over extensive ranges of plastic strain. A higher strain hardening in compression compared with tension appears to be consistent with the observed texture development. The composition dependence of stacking fault energy computed using a thermodynamic model suggests that the Hadfield composition is optimum for a maximum rate of deformation twinning. Comparisons of the Hadfield steel with a Co-33Ni alloy exhibiting similar twinning kinetics, and an Fe-21Ni-lC alloy deforming by slip indicate no unusual strain hardening at low strains where deformation is controlled by slip, but an unusual amount of structural hardening associated with the twin formation in the Hadfield steel. A possible mechanism of anomalous twin hardening is discussed in terms of modified twinning behavior (pseudotwinning) in nonrandom solid solutions.
Strain analysis of SiGe microbridges
NASA Astrophysics Data System (ADS)
Anthony, Ross; Gilbank, Ashley; Crowe, Iain; Knights, Andrew
2018-02-01
We present the analysis of UV (325 nm) Raman scattering spectra from silicon-germanium (SiGe) microbridges where the SiGe has been formed using the so-called "condensation technique". As opposed to the conventional condensation technique in which SiGe is grown epitaxially, we use high-dose ion implantation of Ge ions into SOI as a means to introduce the initial Ge profile. The subsequent oxidation both repairs implantation induced damage, and forms epitaxial Ge. Using Si-Si and Si-Ge optical phonon modes, as well as the ratio of integrated intensities for Ge-Ge and Si-Si, we can determine both the composition and strain of the material. We show that although the material is compressively strained following condensation, by fabricating microbridge structures we can create strain relaxed or tensile strained structures, with subsequent interest for photonic applications.
Broholm, Rikke; Wiinberg, Niels; Simonsen, Lene
2014-09-01
Measurement of the ankle and toe pressures are often performed using a plethysmograph, compression cuffs and a strain gauge. Usually, the strain gauge contains mercury but other alternatives exist. From 2014, the mercury-containing strain gauge will no longer be available in the European Union. The aim of this study was to compare an indium-gallium strain gauge to the established mercury-containing strain gauge. Consecutive patients referred to the Department of Clinical Physiology and Nuclear Medicine at Bispebjerg and Frederiksberg Hospitals for measurements of systolic ankle and toe pressures volunteered for the study. Ankle and toe pressures were measured twice with the mercury and the indium-gallium strain gauge in random order. Comparison of the correlation between the mean pressure using the mercury and the indium-gallium device and the difference between the two devices was performed for both toe and ankle level. A total of 53 patients were included (36 male). Mean age was 69 (range, 45-92 years). Mean pressures at toe and ankle level with the mercury and the indium-gallium strain gauges were 77 (range, 0-180) mm Hg and 113 (range, 15-190) mm Hg, respectively. Comparison between the mercury and the indium-gallium strain gauge showed a difference in toe blood pressure values of - 0.7 mm Hg (SD: 7.0). At the ankle level, a difference of 2.0 mm Hg (SD: 8.6) was found. The two different devices agree sufficiently in the measurements of systolic ankle and toe pressure for the indium-gallium strain gauge to replace the mercury strain gauge.
Description of the Klemperer wing strain meter (accelerometer)
NASA Technical Reports Server (NTRS)
1922-01-01
The wing strain meter enables a pilot to know the strain on lifting surfaces and to warn him of the safe limits which may not be exceeded. In wing strain the most important factors are the force of gravity and the force of lift which gives the measure of the sustaining force, and their components which are perpendicular to the lifting surfaces. This reports methods for using the wing strain meter.
Legionella pneumophila pangenome reveals strain-specific virulence factors.
D'Auria, Giuseppe; Jiménez-Hernández, Nuria; Peris-Bondia, Francesc; Moya, Andrés; Latorre, Amparo
2010-03-17
Legionella pneumophila subsp. pneumophila is a gram-negative gamma-Proteobacterium and the causative agent of Legionnaires' disease, a form of epidemic pneumonia. It has a water-related life cycle. In industrialized cities L. pneumophila is commonly encountered in refrigeration towers and water pipes. Infection is always via infected aerosols to humans. Although many efforts have been made to eradicate Legionella from buildings, it still contaminates the water systems. The town of Alcoy (Valencian Region, Spain) has had recurrent outbreaks since 1999. The strain "Alcoy 2300/99" is a particularly persistent and recurrent strain that was isolated during one of the most significant outbreaks between the years 1999-2000. We have sequenced the genome of the particularly persistent L. pneumophila strain Alcoy 2300/99 and have compared it with four previously sequenced strains known as Philadelphia (USA), Lens (France), Paris (France) and Corby (England).Pangenome analysis facilitated the identification of strain-specific features, as well as some that are shared by two or more strains. We identified: (1) three islands related to anti-drug resistance systems; (2) a system for transport and secretion of heavy metals; (3) three systems related to DNA transfer; (4) two CRISPR (Clustered Regularly Interspaced Short Palindromic Repeats) systems, known to provide resistance against phage infections, one similar in the Lens and Alcoy strains, and another specific to the Paris strain; and (5) seven islands of phage-related proteins, five of which seem to be strain-specific and two shared. The dispensable genome disclosed by the pangenomic analysis seems to be a reservoir of new traits that have mainly been acquired by horizontal gene transfer and could confer evolutionary advantages over strains lacking them.
Strain tolerance in technical Nb3Al superconductors
NASA Astrophysics Data System (ADS)
Banno, N.; Takeuchi, T.; Kitaguchi, H.; Tagawa, K.
2006-10-01
We observed crack formation in transformation-processed Nb3Al wires at room temperature, the wire being bent with a small clamp fixture with a curvature. The polished cross-section parallel to the longitudinal axis was observed, using a high power optical microscope or a field-emission scanning electron microscope. The bend strain limit for microcrack formation is found, changing the radius of the curvature of the clamp. The bend strain limit was found to be around 0.3% for standard Nb3Al wires. This corresponds to the irreversible tensile strain limit of the Ic characteristics determined with a 0.1 µV cm-1 criterion. Reduction of the barrier thickness should be avoided to keep to the bend strain limit. A new configuration of the Nb3Al wire is demonstrated to improve the bend strain limit. The filament is divided into segments in the transverse cross-section. The wire is fabricated by a double-stacking method. The bend strain limit is enhanced to about 0.85% for the wire surface; the equivalent strain of the outermost filament location is about 0.66%. A simple react and wind test for this wire was performed, where the wire experienced 0.86% bend strain. The degradation of Jc was found to be very small.
2013-01-01
Background The emergence of multidrug-resistant bacteria is a world health problem. Staphylococcus aureus, including methicillin-resistant S. aureus (MRSA) strains, is one of the most important human pathogens associated with hospital and community-acquired infections. The aim of this work was to evaluate the antibacterial activity of a Pseudomonas aeruginosa-derived compound against MRSA strains. Methods Thirty clinical MRSA strains were isolated, and three standard MRSA strains were evaluated. The extracellular compounds were purified by vacuum liquid chromatography. Evaluation of antibacterial activity was performed by agar diffusion technique, determination of the minimal inhibitory concentration, curve of growth and viability and scanning electron microscopy. Interaction of an extracellular compound with silver nanoparticle was studied to evaluate antibacterial effect. Results The F3 (ethyl acetate) and F3d (dichloromethane- ethyl acetate) fractions demonstrated antibacterial activity against the MRSA strains. Phenazine-1-carboxamide was identified and purified from the F3d fraction and demonstrated slight antibacterial activity against MRSA, and synergic effect when combined with silver nanoparticles produced by Fusarium oxysporum. Organohalogen compound was purified from this fraction showing high antibacterial effect. Using scanning electron microscopy, we show that the F3d fraction caused morphological changes to the cell wall of the MRSA strains. Conclusions These results suggest that P. aeruginosa-produced compounds such as phenazines have inhibitory effects against MRSA and may be a good alternative treatment to control infections caused by MRSA. PMID:23773484
How strained are carbomeric-cycloalkanes?
Wodrich, Matthew D; Gonthier, Jérôme F; Steinmann, Stephan N; Corminboeuf, Clémence
2010-06-24
The ring strain energies of carbomeric-cycloalkanes (molecules with one or more acetylene spacer units placed into carbon single bonds) are assessed using a series of isodesmic, homodesmotic, and hyperhomodesmotic chemical equations. Isodesmic bond separation reactions and other equations derived from the explicitly defined hierarchy of homodesmotic equations are insufficient for accurately determining these values, since not all perturbing effects (i.e., conjugation and hyperconjugation) are fully balanced. A set of homodesmotic reactions is proposed, which succeeds in balancing all stereoelectronic effects present within the carbomeric rings, allowing for a direct assessment of the strain energies. Values calculated from chemical equations are validated using an increment/additivity approach. The ring strain energy decreases as acetylene units are added, manifesting from the net stabilization gained by opening the C-CH(2)-C angle around the methylene groups and the destabilization arising from bending the C-C identical withC angles of the spacer groups. This destabilization vanishes with increasing parent ring size (i.e., the angle distortion is less in the carbomeric-cyclobutanes than in the carbomeric-cyclopropanes), leading to strain energies near zero for carbo(n)-cyclopentanes and carbo(n)-cyclohexanes.
Strain accumulation in southern California, 1973-1980.
Savage, J.C.; Prescott, W.H.; Lisowski, M.; King, N.E.
1981-01-01
Frequent surveys of seven trilateration networks in southern California over the interval 1973-1980 suggest that a regional increment in strain may have occurred in 1978-1979. Prior to 1978 and after late 1979 the strain accumulation has been predominantly a uniaxial north-south compression. This secular trend was interrupted sometime in 1978-1979 by an increment in both north-south and east-west extension in five of the seven networks. The onset of this change appears to have occurred first in the networks farthest south. The changes occurred without any unusual seismicity within the networks, but the overall seismicity in southern California was unusually low prior to and has been unusually high since the occurrence. The average principal strain rates for the seven networks in the 1973-1980 interval are 0.17 mu strain/yr north- south contraction and 0.08 mu strain/yr east-west extension. Although the observed increment in strain could be related to unidentified systematic error in the measuring system, a careful review of the measurements and comparisons with three other measuring systems reveal no appreciable cumulative systematic error. -Authors
Potentially probiotic Lactobacillus strains from traditional Kurdish cheese.
Hashemi, Seyed Mohammad Bagher; Shahidi, Fakhri; Mortazavi, Seyed Ali; Milani, Elnaz; Eshaghi, Zarrin
2014-03-01
In this study, the probiotic potential of Lactobacillus strains isolated from traditional Kurdish cheese was investigated. The Lactobacillus strains were examined for resistance to gastric acidity and bile toxicity, antimicrobial activities, autoaggregation, coaggregation, hydrophobicity, adhesion to Caco-2 cells, and antibiotic susceptibility. The results showed that all strains tested tolerate acid gastric conditions (pH 2.0 and 3.0), and all of them were bile resistant (at 0.3 and 1% concentration). Although no antibacterial activity was detected in vitro assay for the treated (neutralized to pH 6.5 and treated with catalase) cell-free culture supernatant (CFCS) of strains, untreated CFCS showed strong antagonistic activity against two known pathogens bacteria. All strains exhibited a strong autoaggregating phenotype and manifested a high degree of coaggregation with pathogens. On the other hand, majority of studied strains were found sensitive to different antibiotics, such as ampicillin, penicillin, ciprofloxacin, chloramphenicol, erythromycin, rifampicin, and tetracycline, and were resistant to vancomycin and streptomycin. Finally, isolated strains showed good hydrophobicity and adherence to Caco-2 cell line, so they could be exploited for food manufacture.
Genetic engineering of industrial strains of Saccharomyces cerevisiae.
Le Borgne, Sylvie
2012-01-01
Genetic engineering has been successfully applied to Saccharomyces cerevisiae laboratory strains for different purposes: extension of substrate range, improvement of productivity and yield, elimination of by-products, improvement of process performance and cellular properties, and extension of product range. The potential of genetically engineered yeasts for the massive production of biofuels as bioethanol and other nonfuel products from renewable resources as lignocellulosic biomass hydrolysates has been recognized. For such applications, robust industrial strains of S. cerevisiae have to be used. Here, some relevant genetic and genomic characteristics of industrial strains are discussed in relation to the problematic of the genetic engineering of such strains. General molecular tools applicable to the manipulation of S. cerevisiae industrial strains are presented and examples of genetically engineered industrial strains developed for the production of bioethanol from lignocellulosic biomass are given.
Effects of replicative fitness on competing HIV strains.
Chirove, Faraimunashe; Lungu, Edward M
2013-07-01
We develop an n-strain model to show the effects of replicative fitness of competing viral strains exerting selective density-dependant infective pressure on each other. A two strain model is used to illustrate the results. A perturbation technique and numerical simulations were used to establish the existence and stability of steady states. More than one infected steady states governed by the replicative fitness resulted from the model exhibiting either strain replacement or co-infection. We found that the presence of two or more HIV strains could result in a disease-free state that, in general, is not globally stable. Copyright © 2013 Elsevier Ireland Ltd. All rights reserved.
Strain-controlled fatigue of acrylic bone cement.
Carter, D R; Gates, E I; Harris, W H
1982-09-01
Monotonic tensile tests and tension-compression fatigue tests were conducted of wet acrylic bone cement specimens at 37 degrees C. All testing was conducted in strain control at a strain rate of 0.02/s. Weibull analysis of the tensile tests indicated that monotonic fracture was governed more strongly by strain than stress. The number of cycles to fatigue failure was also more strongly controlled by strain amplitude than stress amplitude. Specimen porosity distribution played a major role in determining the tensile and fatigue strengths. The degree of data scatter suggests that Weibull analysis of fatigue data may be useful in developing design criteria for the surgical use of bone cement.
Pathogenic Escherichia coli strain discrimination using laser-induced breakdown spectroscopy
NASA Astrophysics Data System (ADS)
Diedrich, Jonathan; Rehse, Steven J.; Palchaudhuri, Sunil
2007-07-01
A pathogenic strain of bacteria, Escherichia coli O157:H7 (enterohemorrhagic E. coli or EHEC), has been analyzed by laser-induced breakdown spectroscopy (LIBS) with nanosecond pulses and compared to three nonpathogenic E. coli strains: a laboratory strain of K-12 (AB), a derivative of the same strain termed HF4714, and an environmental strain, E. coli C (Nino C). A discriminant function analysis (DFA) was performed on the LIBS spectra obtained from live colonies of all four strains. Utilizing the emission intensity of 19 atomic and ionic transitions from trace inorganic elements, the DFA revealed significant differences between EHEC and the Nino C strain, suggesting the possibility of identifying and discriminating the pathogenic strain from commonly occurring environmental strains. EHEC strongly resembled the two K-12 strains, in particular, HF4714, making discrimination between these strains difficult. DFA was also used to analyze spectra from two of the nonpathogenic strains cultured in different media: on a trypticase soy (TS) agar plate and in a liquid TS broth. Strains cultured in different media were identified and effectively discriminated, being more similar than different strains cultured in identical media. All bacteria spectra were completely distinct from spectra obtained from the nutrient medium or ablation substrate alone. The ability to differentiate strains prepared and tested in different environments indicates that matrix effects and background contaminations do not necessarily preclude the use of LIBS to identify bacteria found in a variety of environments or grown under different conditions.
Inversion of the strain-life and strain-stress relationships for use in metal fatigue analysis
NASA Technical Reports Server (NTRS)
Manson, S. S.
1979-01-01
The paper presents closed-form solutions (collocation method and spline-function method) for the constants of the cyclic fatigue life equation so that they can be easily incorporated into cumulative damage analysis. The collocation method involves conformity with the experimental curve at specific life values. The spline-function method is such that the basic life relation is expressed as a two-part function, one applicable at strains above the transition strain (strain at intersection of elastic and plastic lines), the other below. An illustrative example is treated by both methods. It is shown that while the collocation representation has the advantage of simplicity of form, the spline-function representation can be made more accurate over a wider life range, and is simpler to use.
Fiber-Optic Strain Sensors With Linear Characteristics
NASA Technical Reports Server (NTRS)
Egalon, Claudio O.; Rogowski, Robert S.
1993-01-01
Fiber-optic modal domain strain sensors having linear characteristics over wide range of strains proposed. Conceived in effort to improve older fiber-optic strain sensors. Linearity obtained by appropriate choice of design parameters. Pattern of light and dark areas at output end of optical fiber produced by interference between electromagnetic modes in which laser beam propagates in fiber. Photodetector monitors intensity at one point in pattern.
Generating strain signals under consideration of road surface profiles
NASA Astrophysics Data System (ADS)
Putra, T. E.; Abdullah, S.; Schramm, D.; Nuawi, M. Z.; Bruckmann, T.
2015-08-01
The current study aimed to develop the mechanism for generating strain signal utilising computer-based simulation. The strain data, caused by the acceleration, were undertaken from a fatigue data acquisition involving car movements. Using a mathematical model, the measured strain signals yielded to acceleration data used to describe the bumpiness of road surfaces. The acceleration signals were considered as an external disturbance on generating strain signals. Based on this comparison, both the actual and simulated strain data have similar pattern. The results are expected to provide new knowledge to generate a strain signal via a simulation.
Zhang, Hui; Wang, Shuang; Zhang, Xiang Xiang; Ji, Wei; Song, Fuping; Zhao, Yue; Li, Jie
2016-04-28
The filamentous fungus Aspergillus niger is widely exploited as an important expression host for industrial production. The glucoamylase high-producing strain A. niger CICC2462 has been used as a host strain for the establishment of a secretion expression system. It expresses recombinant xylanase, mannase and asparaginase at a high level, but some high secretory background proteins in these recombinant strains still remain, such as alpha-amylase and alpha-glucosidase; lead to a low-purity of fermentation products. The aim was to construct an A. niger host strain with a low background of protein secretion. The transcription factor amyR was deleted in A. niger CICC2462, and the results from enzyme activity assays and SDS-PAGE analysis showed that the glucoamylase and amylase activities of the ∆amyR strains were significantly lower than those of the wild-type strain. High-throughput RNA-sequencing and shotgun LC-MS/MS proteomic technology analysis demonstrated that the expression of amylolytic enzymes was decreased at both the transcriptional and translational levels in the ∆amyR strain. Interestingly, the ∆amyR strain growth rate better than the wild-type strain. Our findings clearly indicated that the ∆amyR strain of A. niger CICC2462 can be used as a host strain with a low background of protein secretion.
[Expression and analysis of the nucleoprotein of paramyxovirus Tianjin strain].
Wang, Qing; Li, Mei; Shi, Li-Ying; Yuan, Li-Jun; Wang, Wen-Xiu
2008-05-01
Paramyxovirus Tianjin strain is a novel strain of virus causing common cotton-eared marmoset fatal infection. To investigate the relationship between the gene structure and function of nucleoprotein (NP) of Tianjin strain, NP gene of paramyxovirus Tianjin strain was cloned and three domains of NP were expressed. The homologous and phylogenetic analysis of NP sequences among the paramyxovirus Tianjin strain and eight strains of Sendai viruses from GenBank were performed. The results indicated the recombinant proteins NP1, NP2 and NP3 showed the native antigenicity to the polyclonal antiserum of paramyxovirus Tianjin strain, ranking as NP3>NP1>NP2 (precedence order). The homology of NP nucleotide and the deduced amino acid sequences between paramyxovirus Tianjin strain and Sendai virus BB1 strain were 94.5%, 96.2%, respectively, whereas the identity were 85.1% - 88.7% and 92.4% - 94.7% among Tianjin strain and the 7 strains of Sendai viruses from GenBank respectively. There were 15 unique amino acid substitutions in Tianjin strain NP protein and 11 common amino acid substitutions same with BB1 strain. This research confirmed that paramyxovirus Tianjin strain might be a new genotype of Sendai virus and can be helpful in the establishment of detection assay applying recombinant NP as antigen instead of the whole virions.
Life-course financial strain and health in African-Americans.
Szanton, Sarah L; Thorpe, Roland J; Whitfield, Keith
2010-07-01
Differential exposure to financial strain may explain some differences in population health. However, few studies have examined the cumulative health effect of financial strain across the life-course. Studies that have are limited to self-reported health measures. Our objective was to examine the associations between childhood, adulthood, and life-course, or cumulative, financial strain with disability, lung function, cognition, and depression. In a population-based cross-sectional cohort study of adult African-American twins enrolled in the US Carolina African American Twin Study of Aging (CAATSA), we found that participants who reported financial strain as children and as adults are more likely to be physically disabled, and report more depressive symptoms than their unstrained counterparts. Participants who reported childhood financial strain had lower cognitive functioning than those with no childhood financial strain. We were unable to detect a difference in lung function beyond the effect of actual income and education in those who reported financial strain compared to those who did not. Financial strain in adulthood was more consistently associated with poor health than was childhood financial strain, a finding that suggests targeting adult financial strain could help prevent disability and depression among African-American adults. Copyright 2010 Elsevier Ltd. All rights reserved.
NASA Astrophysics Data System (ADS)
Benjamin, Colin
2015-03-01
A Josepshon qubit is designed via the application of a tensile strain to a topological insulator surface, sandwiched between two s-wave superconductors. The strain applied leads to a shift in Dirac point without changing the conducting states existing on the surface of a topological insulator. This strain applied can be tuned to form a π-junction in such a structure. Combining two such junctions in a ring architecture leads to the ground state of the ring being in a doubly degenerate state- ``0'' and ``1'' states of the qubit. A qubit designed this way is easily controlled via the tunable strain. We report on the conditions necessary to design such a qubit. Finally the operating time of a single qubit phase gate is derived. This work was supported by funds from Dept. of Science and Technology (Nanomission), Govt. of India, Grant No. SR/NM/NS-1101/2011.
Material mechanical characterization method for multiple strains and strain rates
Erdmand, III, Donald L.; Kunc, Vlastimil; Simunovic, Srdjan; Wang, Yanli
2016-01-19
A specimen for measuring a material under multiple strains and strain rates. The specimen including a body having first and second ends and a gage region disposed between the first and second ends, wherein the body has a central, longitudinal axis passing through the first and second ends. The gage region includes a first gage section and a second gage section, wherein the first gage section defines a first cross-sectional area that is defined by a first plane that extends through the first gage section and is perpendicular to the central, longitudinal axis. The second gage section defines a second cross-sectional area that is defined by a second plane that extends through the second gage section and is perpendicular to the central, longitudinal axis and wherein the first cross-sectional area is different in size than the second cross-sectional area.
NASA Astrophysics Data System (ADS)
Motoyama, Yuichi; Shiga, Hidetoshi; Sato, Takeshi; Kambe, Hiroshi; Yoshida, Makoto
2017-06-01
Recovery behavior (recovery) and strain-rate dependence of the stress-strain curve (strain-rate dependence) are incorporated into constitutive equations of alloys to predict residual stress and thermal stress during casting. Nevertheless, few studies have systematically investigated the effects of these metallurgical phenomena on the prediction accuracy of thermal stress in a casting. This study compares the thermal stress analysis results with in situ thermal stress measurement results of an Al-Si-Cu specimen during casting. The results underscore the importance for the alloy constitutive equation of incorporating strain-rate dependence to predict thermal stress that develops at high temperatures where the alloy shows strong strain-rate dependence of the stress-strain curve. However, the prediction accuracy of the thermal stress developed at low temperatures did not improve by considering the strain-rate dependence. Incorporating recovery into the constitutive equation improved the accuracy of the simulated thermal stress at low temperatures. Results of comparison implied that the constitutive equation should include strain-rate dependence to simulate defects that develop from thermal stress at high temperatures, such as hot tearing and hot cracking. Recovery should be incorporated into the alloy constitutive equation to predict the casting residual stress and deformation caused by the thermal stress developed mainly in the low temperature range.
Beck, Andrew; Tesh, Robert B.; Wood, Thomas G.; Widen, Steven G.; Ryman, Kate D.; Barrett, Alan D. T.
2014-01-01
Background. The first comparison of a live RNA viral vaccine strain to its wild-type parental strain by deep sequencing is presented using as a model the yellow fever virus (YFV) live vaccine strain 17D-204 and its wild-type parental strain, Asibi. Methods. The YFV 17D-204 vaccine genome was compared to that of the parental strain Asibi by massively parallel methods. Variability was compared on multiple scales of the viral genomes. A modeled exploration of small-frequency variants was performed to reconstruct plausible regions of mutational plasticity. Results. Overt quasispecies diversity is a feature of the parental strain, whereas the live vaccine strain lacks diversity according to multiple independent measurements. A lack of attenuating mutations in the Asibi population relative to that of 17D-204 was observed, demonstrating that the vaccine strain was derived by discrete mutation of Asibi and not by selection of genomes in the wild-type population. Conclusions. Relative quasispecies structure is a plausible correlate of attenuation for live viral vaccines. Analyses such as these of attenuated viruses improve our understanding of the molecular basis of vaccine attenuation and provide critical information on the stability of live vaccines and the risk of reversion to virulence. PMID:24141982
Sonnenborn, Ulrich
2016-10-01
Among the gram-negative microorganisms with probiotic properties, Escherichia coli strain Nissle 1917 (briefly EcN) is probably the most intensively investigated bacterial strain today. Since nearly 100 years, the EcN strain is used as the active pharmaceutical ingredient in a licensed medicinal product that is distributed in Germany and several other countries. Over the last few decades, novel probiotic activities have been detected, which taken together are specific of this versatile E. coli strain. This review gives a short overview on the discovery and history of the EcN strain. © FEMS 2016. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.
Discerning strain effects in microbial dose-response data.
Coleman, Margaret E; Marks, Harry M; Golden, Neal J; Latimer, Heejeong K
In order to estimate the risk or probability of adverse events in risk assessment, it is necessary to identify the important variables that contribute to the risk and provide descriptions of distributions of these variables for well-defined populations. One component of modeling dose response that can create uncertainty is the inherent genetic variability among pathogenic bacteria. For many microbial risk assessments, the "default" assumption used for dose response does not account for strain or serotype variability in pathogenicity and virulence, other than perhaps, recognizing the existence of avirulent strains. However, an examination of data sets from human clinical trials in which Salmonella spp. and Campylobacter jejuni strains were administered reveals significant strain differences. This article discusses the evidence for strain variability and concludes that more biologically based alternatives are necessary to replace the default assumptions commonly used in microbial risk assessment, specifically regarding strain variability.
Closure of fatigue cracks at high strains
NASA Technical Reports Server (NTRS)
Iyyer, N. S.; Dowling, N. E.
1985-01-01
Experiments were conducted on smooth specimens to study the closure behavior of short cracks at high cyclic strains under completely reversed cycling. Testing procedures and methodology, and closure measurement techniques, are described in detail. The strain levels chosen for the study cover from predominantly elastic to grossly plastic strains. Crack closure measurements are made at different crack lengths. The study reveals that, at high strains, cracks close only as the lowest stress level in the cycle is approached. The crack opening is observed to occur in the compressive part of the loading cycle. The applied stress needed to open a short crack under high strain is found to be less than for cracks under small scale yielding. For increased plastic deformations, the value of sigma sub op/sigma sub max is observed to decrease and approaches the value of R. Comparison of the experimental results with existing analysis is made and indicates the limitations of the small scale yielding approach where gross plastic deformation behavior occurs.
[New antibiotics produced by Bacillus subtilis strains].
Malanicheva, I A; Kozlov, D G; Efimenko, T A; Zenkova, V A; Kastrukha, G S; Reznikova, M I; Korolev, A M; Borshchevskaia, L N; Tarasova, O D; Sineokiĭ, S P; Efremenkova, O V
2014-01-01
Two Bacillus subtilis strains isolated from the fruiting body of a basidiomycete fungus Pholiota squarrosa exhibited a broad range of antibacterial activity, including those against methicillin-resistant Staphylococcus aureus INA 00761 (MRSA) and Leuconostoc mes6nteroides VKPM B-4177 resistant to glycopep-> tide antibiotics, as well as antifungal activity. The strains were identified as belonging to the "B. subtilis" com- plex based on their morphological and physiological characteristics, as well as by sequencing of the 16S rRNA gene fragments. Both strains (INA 01085 and INA 01086) produced insignificant amounts of polyene antibiotics (hexaen and pentaen, respectively). Strain INA 01086 produced also a cyclic polypeptide antibiotic containing Asp, Gly, Leu, Pro, Tyr, Thr, Trp, and Phe, while the antibiotic of strain INA 01085 contained, apart from these, two unidentified nonproteinaceous amino acids. Both polypeptide antibiotics were new compounds efficient against gram-positive bacteria and able to override the natural bacterial antibiotic resistance.
Strain rate effects in stress corrosion cracking
DOE Office of Scientific and Technical Information (OSTI.GOV)
Parkins, R.N.
Slow strain rate testing (SSRT) was initially developed as a rapid, ad hoc laboratory method for assessing the propensity for metals an environments to promote stress corrosion cracking. It is now clear, however, that there are good theoretical reasons why strain rate, as opposed to stress per se, will often be the controlling parameter in determining whether or not cracks are nucleated and, if so, are propagated. The synergistic effects of the time dependence of corrosion-related reactions and microplastic strain provide the basis for mechanistic understanding of stress corrosion cracking in high-pressure pipelines and other structures. However, while this maymore » be readily comprehended in the context of laboratory slow strain tests, its extension to service situations may be less apparent. Laboratory work involving realistic stressing conditions, including low-frequency cyclic loading, shows that strain or creep rates give good correlation with thresholds for cracking and with crack growth kinetics.« less
Li, Peng; Wang, Dechen; Yan, Jinli; Zhou, Jianuan; Deng, Yinyue; Jiang, Zide; Cao, Bihao; He, Zifu; Zhang, Lianhui
2016-01-01
Ralstonia solanacearum species complex is a devastating group of phytopathogens with an unusually wide host range and broad geographical distribution. R. solanacearum isolates may differ considerably in various properties including host range and pathogenicity, but the underlying genetic bases remain vague. Here, we conducted the genome sequencing of strain EP1 isolated from Guangdong Province of China, which belongs to phylotype I and is highly virulent to a range of solanaceous crops. Its complete genome contains a 3.95-Mb chromosome and a 2.05-Mb mega-plasmid, which is considerably bigger than reported genomes of other R. solanacearum strains. Both the chromosome and the mega-plasmid have essential house-keeping genes and many virulence genes. Comparative analysis of strain EP1 with other 3 phylotype I and 3 phylotype II, III, IV strains unveiled substantial genome rearrangements, insertions and deletions. Genome sequences are relatively conserved among the 4 phylotype I strains, but more divergent among strains of different phylotypes. Moreover, the strains exhibited considerable variations in their key virulence genes, including those encoding secretion systems and type III effectors. Our results provide valuable information for further elucidation of the genetic basis of diversified virulences and host range of R. solanacearum species. PMID:27833603
Zhu, Yu; Wang, Gui-Hua; Cui, Yu-Dong; Cui, Shang-Jin
2016-09-01
Porcine epidemic diarrhea virus (PEDV) can cause serious disease and even death in neonatal piglets, resulting in serious damage to the swine industry worldwide. Open reading frame 3 (ORF3) is the only accessory gene in the PEDV genome. Previous studies have indicated that PEDV vaccine strains have a partial deletion in ORF3. In this study, a nanoparticle-assisted polymerase chain reaction (nanoparticle-assisted RT-PCR) assay targeting the ORF3 of PEDV was developed to distinguish PEDV field strains from attenuated strains by using a specific pair of primers. The PCR products of field strains and attenuated strains were 264 bp and 215 bp in length, respectively. The sensitivity and specificity of this assay were also assessed. The nanoparticle-assisted RT-PCR assay was 10-100 times more sensitive than the conventional RT-PCR assay, with no cross-reactions when amplifying porcine pseudorabies virus (PRV), porcine circovirus type 2 (PCV2), classical swine fever virus (CSFV), porcine parvovirus (PPV), porcine reproductive and respiratory syndrome virus (PRRSV), porcine rotavirus (RV), and porcine transmissible gastroenteritis virus (TGEV). The nanoparticle-assisted RT-PCR assay we describe here can be used to distinguish field strains from vaccine strains of PEDV, and it shows promise for reducing economic loss due to PEDV infection.
Maltodextrin Acceptance and Preference in Eight Mouse Strains.
Poole, Rachel L; Aleman, Tiffany R; Ellis, Hillary T; Tordoff, Michael G
2016-01-01
Rodents are strongly attracted to the taste(s) of maltodextrins. A first step toward discovery of the underlying genes involves identifying phenotypic differences among inbred strains of mice. To do this, we used 5-s brief-access tests and 48-h 2-bottle choice tests to survey the avidity for the maltodextrin, Maltrin M040, of mice from 8 inbred strains (129S1/SvImJ, A/J, CAST/EiJ, C57BL/6J, NOD/ShiLTJ, NZO/HlLtJ, PWK/PhJ, and WSB/EiJ). In brief-access tests, the CAST and PWK strains licked significantly less maltodextrin than equivalent concentrations of sucrose, whereas the other strains generally licked the 2 carbohydrates equally. Similarly, in 2-bottle choice tests, the CAST and PWK strains drank less 4% maltodextrin than 4% sucrose, whereas the other strains had similar intakes of these 2 solutions; the CAST and PWK strains did not differ from the C57, NOD, or NZO strains in 4% sucrose intake. In sum, we have identified strain variation in maltodextrin perception that is distinct from variation in sucrose perception. The phenotypic variation characterized here will aid in identifying genes responsible for maltodextrin acceptance. Our results identify C57 × PWK mice or NZO × CAST mice as informative crosses to produce segregating hybrids that will expose quantitative trait loci underlying maltodextrin acceptance and preference. © The Author 2015. Published by Oxford University Press. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.
Strain corrosion cracking in rpm sewer piping
DOE Office of Scientific and Technical Information (OSTI.GOV)
Hopkins, S.W.; Wachob, H.F.; Duffner, D.H.
1993-12-31
Long term, aggressive environmental exposure can result in localized failure of large diameter, glass reinforced plastic mortar (RPM) piping. In order to evaluate the performance of the liner and glass reinforced matrix polyester resin, accelerated strain corrosion tests were performed on samples of RPM piping that had already experienced almost 15 years of service. To assess the sensitivity of RPM pipe to acidic environments and to correlate the fractography of the laboratory produced failures with the excavated crack, short segments of 8-inch and 48-inch diameter piping were statically loaded to produce various known surface strains. After preloading the specimens tomore » fixed strain levels, these samples were then exposed to sulfuric acid solutions having pH values of 2.7 and 4.7 and monitored as a function of time until failure. The resulting lifetimes were related to initial surface strains and showed a decreasing logarithmic relationship. Fractographic examination of the excavated crack revealed the typical strain corrosion fractography of glass fibers after almost a 1000 hour exposure at 1.3 % strain; similar fractographic observations were obtained from failed laboratory samples. At shorter times, failure appeared to be overload in nature and exhibited little, if any, timedependent fracture features. Fractographic examination of the excavated crack strongly indicated that the crack had been present for a significant time. The extremely aggressive environment had totally dissolved the exposed glass reinforcement. Based on the laboratory strain corrosion performance, the nature of the contained cracking, and fractography of the failed surface, cracking of the excavated RPM pipe was believed to be the result of an early overload failure that subsequently propagated slowly via strain corrosion in an extremely aggressive environment.« less
Submicron mapping of strained silicon-on-insulator features induced
NASA Astrophysics Data System (ADS)
Murray, Conal E.; Sankarapandian, M.; Polvino, S. M.; Noyan, I. C.; Lai, B.; Cai, Z.
2007-04-01
Real-space maps of strain within silicon-on-insulator (SOI) features induced by adjacent, embedded shallow-trench-isolation (STI) SiO2 regions were obtained using x-ray microbeam diffraction. The quantitative strain mapping indicated that the SOI strain was largest at the SOI/STI interface and decreased as a function of distance from this interface. An out-of-plane residual strain of approximately -31μɛ was observed in the blanket regions of the SOI. A comparison of the depth-averaged strain distributions to the strain profiles calculated from an Eshelby inclusion model indicated an equivalent eigenstrain of -0.55% in the STI regions acting on the SOI features.
Strain-induced negative differential resistance in ultrasmall carbon nanotube
NASA Astrophysics Data System (ADS)
Fang, Hui; Zhang, Fei-Peng; Ruan, Xing-Xiang; Huang, Can-Sheng; Jiang, Zhi-Nian; Peng, Jin-Yun; Wang, Ru-Zhi
2017-08-01
The transport properties in ultrasmall single-wall carbon nanotubes (SWCNTs) under tensile strain have been theoretically investigated. The regular negative differential resistance (NDR) induced by the strain undergoes a process from enhancement to weakening in the zigzag (3,0) SWCNT. The NDR achieves maximum with applying 4% tensile strain. Compared to the case of (3,0) SWCNT, that NDR cannot be manipulated by applying strain clearly in (4,0) and (5,0) ultrasmall SWCNTs with tensile strain lower than 10%. It proposes this strain-induced NDR effect to demonstrate the possibility of finding potential applications in SWCNT-based NDR nanodevices such as in memory devices, oscillators and fast switching devices.
Proteomic analysis of Mycoplasma gallisepticum vaccine strain F
USDA-ARS?s Scientific Manuscript database
The persistence and displacement abilities of the Mycoplasma gallisepticum vaccine strain F (F-strain) are well documented. Understanding the mechanism(s) of colonization and persistence of F-strain will aid in the current intervention strategies to diagnose and control MG infections in poultry. In ...
Residual Strain in PCBs with Cu-Plated Holes
NASA Astrophysics Data System (ADS)
Rudajevova, A.; Dušek, K.
2017-12-01
The residual strain in pure printed circuit boards (PCBs) and PCBs with Cu-plated holes has been obtained by measurement of the temperature dependence of their dilatational characteristics in the x, y, and z directions up to 240°C. Shrinkage in all directions was observed for all samples of both materials in the first thermal cycle. No permanent length changes were observed in the second or subsequent thermal cycles. The residual strain was determined from the difference in relative elongation between the first and second thermal cycles. Relaxation of residual strain occurred only in the first thermal cycle, as a thermally activated process. The highest value of relaxed residual strain was found in the z direction for both materials. Relaxation of residual strain in the z direction of the pure PCB occurred only in the negative strain range, whereas relaxation of the PCB with Cu-plated holes occurred in both the positive and negative strain ranges. The relaxation of the positive strain in the PCB with Cu-plated holes in the z direction implies that this part of the PCB was under pressure during its preparation. This relaxation is a consequence of the high coefficient of thermal expansion of PCB laminate in this direction, which can also lead to cracks in Cu holes when the material is heated above the glass-transition temperature.
The premixed flame in uniform straining flow
NASA Technical Reports Server (NTRS)
Durbin, P. A.
1982-01-01
Characteristics of the premixed flame in uniform straining flow are investigated by the technique of activation-energy asymptotics. An inverse method is used, which avoids some of the restrictions of previous analyses. It is shown that this method recovers known results for adiabatic flames. New results for flames with heat loss are obtained, and it is shown that, in the presence of finite heat loss, straining can extinguish flames. A stability analysis shows that straining can suppress the cellular instability of flames with Lewis number less than unity. Strain can produce instability of flames with Lewis number greater than unity. A comparison shows quite good agreement between theoretical deductions and experimental observations of Ishizuka, Miyasaka & Law (1981).
Deoxyribonucleic acid-deficient strains of Candida albicans.
Olaiya, A F; Steed, J R; Sogin, S J
1980-03-01
We analyzed a series of germ tube-negative variants isolated from Candida albicans 3153A for deoxyribonucleic acid content. As analyzed by flow microfluorometry, the deoxyribonucleic acid level in these variant strains was 50% of that of the parental strain and equivalent to that of haploid Saccharomyces cerevisiae. This finding was confirmed by comparison of survival rates when exposed to the mutagens ultraviolet light, ethyl methane sulfonate, and methyl methane sulfonate. The diameter of the variant cells as compared to the diameter of the parental 3153A strain showed a relationship similar to that of the diameters of haploid versus diploid S. cerevisiae. These results indicate that those strains may be representative of the imperfect stage of C. albicans.
Morgand, Marjolaine; Vimont, Sophie; Bleibtreu, Alexandre; Boyd, Anders; Thien, Hoang Vu; Zahar, Jean-Ralph; Denamur, Erick; Arlet, Guillaume
2014-11-01
Infections caused by extended-spectrum beta-lactamase (ESBL)-producing Escherichia coli are an important cause of morbidity and mortality, especially in children. We compared 58 epidemiologically unrelated ESBL-producing E. coli strains that caused infections. They were isolated between 2008 and 2012 in two Parisian pediatric hospitals and grouped according to their origin into either community-acquired (CA) (n=37) or nosocomially acquired (NA) (n=21) strains. Molecular characteristics of the ESBLs, phylogenetic traits of the strains including their belonging to clone O25b-ST131, prevalence of associated virulence genes, growth capacities in different media, metabolic phenotype and biofilm formation abilities were studied. ESBL type, associated resistance and distribution of phylogenetic groups were similar in the CA and NA groups. More than 60% of the B2 phylogroup strains in both groups belonged to the ST131 clone. Interestingly, CA strains possessed more genes encoding virulence factors and the distribution of these genes differed significantly between the two groups: fyuA, hlyC, papC and papGII were more frequent in the CA group, whereas iroN was more frequent in the NA group. CA strains also showed enhanced growth capacities in Luria Bertani rich medium. They tended to produce more biofilm but the difference was not significant. This study confirms the wide spread of clone ST131 among infected children, regardless of whether their infections were community- or nosocomially acquired. It highlights genotypic and phenotypic differences according to the origin of the strains that could indicate adaptability of these multi-resistant bacteria to specific environmental and host factors. Copyright © 2014 Elsevier GmbH. All rights reserved.
Lieberg, J; Pruks, L-L; Kals, M; Paapstel, K; Aavik, A; Kals, J
2018-06-01
Abdominal aortic aneurysm is a degenerative vascular pathology with high mortality due to its rupture, which is why timely treatment is crucial. The current single-center retrospective study was undertaken to analyze short- and long-term all-cause mortality after operative treatment of abdominal aortic aneurysm and to examine the factors that influence outcome. The data of all abdominal aortic aneurysm patients treated with open repair or endovascular aneurysm repair in 2004-2015 were retrospectively retrieved from the clinical database of Tartu University Hospital. The primary endpoint was 30-day, 90-day, and 5-year all-cause mortality. The secondary endpoint was determination of the risk factors for mortality. Elective abdominal aortic aneurysm repair was performed on 228 patients (mean age 71.8 years), of whom 178 (78%) were treated with open repair and 50 (22%) with endovascular aneurysm repair. A total of 48 patients with ruptured abdominal aortic aneurysm were treated with open repair (mean age 73.8 years) at the Department of Vascular Surgery, Tartu University Hospital, Estonia. Mean follow-up period was 4.2 ± 3.3 years. In patients with elective abdominal aortic aneurysm, 30-day, 90-day, and 5-year all-cause mortality rates were 0.9%, 2.6%, and 32%, respectively. In multivariate analysis, the main predictors for 5-year mortality were preoperative creatinine value and age (p < 0.05). In patients with ruptured abdominal aortic aneurysm, 30-day, 90-day, and 5-year all-cause mortality rates were 22.9%, 33.3%, and 55.1%, respectively. In multivariate analysis, the risk factors for 30-day mortality in ruptured abdominal aortic aneurysm were perioperative hemoglobin and lactate levels (p < 0.05). According to this study, the all-cause mortality rates of elective abdominal aortic aneurysm and ruptured abdominal aortic aneurysm at our hospital were comparable to those at other centers worldwide. Even though some variables were identified as
The relationship between strain geometry and geometrically necessary dislocations
NASA Astrophysics Data System (ADS)
Hansen, Lars; Wallis, David
2016-04-01
The kinematics of past deformations are often a primary goal in structural analyses of strained rocks. Details of the strain geometry, in particular, can help distinguish hypotheses about large-scale tectonic phenomena. Microstructural indicators of strain geometry have been heavily utilized to investigate large-scale kinematics. However, many of the existing techniques require structures for which the initial morphology is known, and those structures must undergo the same deformation as imposed macroscopically. Many deformed rocks do not exhibit such convenient features, and therefore the strain geometry is often difficult (if not impossible) to ascertain. Alternatively, crystallographic textures contain information about the strain geometry, but the influence of strain geometry can be difficult to separate from other environmental factors that might affect slip system activity and therefore the textural evolution. Here we explore the ability for geometrically necessary dislocations to record information about the deformation geometry. It is well known that crystallographic slip due to the motion of dislocations yields macroscopic plastic strain, and the mathematics are established to relate dislocation glide on multiple slip systems to the strain tensor of a crystal. This theoretical description generally assumes that dislocations propagate across the entire crystal. However, at any point during the deformation, dislocations are present that have not fully transected the crystal, existing either as free dislocations or as dislocations organized into substructures like subgrain boundaries. These dislocations can remain in the lattice after deformation if the crystal is quenched sufficiently fast, and we hypothesize that this residual dislocation population can be linked to the plastic strain geometry in a quantitative manner. To test this hypothesis, we use high-resolution electron backscatter diffraction to measure lattice curvatures in experimentally deformed