Experimental Investigation of Gas/Slag/Matte/Spinel Equilibria in the Cu-Fe-O-S-Si System at 1473 K (1200 °C) and P(SO2) = 0.25 atm

NASA Astrophysics Data System (ADS)

Hidayat, Taufiq; Fallah-Mehrjardi, Ata; Hayes, Peter C.; Jak, Evgueni

2018-04-01

New experimental data were obtained on the gas/slag/matte/spinel equilibria in the Cu-Fe-O-S-Si system at 1473 K (1200 °C) and P(SO2) = 0.25 atm covering Cu concentrations in matte between 42 and 78 wt pct Cu. Accurate measurements were obtained using high-temperature equilibration and the rapid quenching technique, followed by electron-probe X-ray microanalysis of equilibrium phase compositions. The use of spinel substrates made to support the samples ensures equilibrium with this primary phase solid, eliminates crucible contamination, and facilitates direct gas-condensed phase equilibrium and high quenching rates. Particular attention was given to the confirmation of the achievement of equilibrium. The results quantify the relationship between Cu in matte and oxygen partial pressure, sulfur in matte, oxygen in matte, Fe/SiO2 at slag liquidus, sulfur in slag, and dissolved copper in slag.

Oxidation Potentials in Matte Smelting of Copper and Nickel

NASA Astrophysics Data System (ADS)

Matousek, Jan W.

2014-09-01

The oxidation potential, given as the base-ten logarithm of the oxygen partial pressure in bars and the temperature [log pO2/ T, °C], defines the state of oxidation of pyrometallurgical extraction and refining processes. This property varies from copper making, [-6/1150]; to lead/zinc smelting, [-10/1200]; to iron smelting, [-13/1600]. The current article extends the analysis to the smelting of copper and nickel/copper sulfide concentrates to produce mattes of the type Cu(Ni)FeS(O) and iron silicate slags, FeOxSiO2—with oxidation potentials of [-7.5/1250].

Recovery Act update from Sr. Advisor Matt Rogers -- End of Obligations

ScienceCinema

Rogers, Matt

2018-02-13

Senior Advisor to the Secretary for Recovery Act Implementation Matt Rogers shares his thoughts as the Recovery Act reaches a critical milestone -- the end of the 2010 fiscal year and the last day to obligation contract and grant funding under the Recovery Act. For more information about the Recovery Act at the Department of Energy: http://www.energy.gov/recovery Follow the Department of Energy! http://facebook.com/energygov http://twitter.com/energy

Recovery Act update from Sr. Advisor Matt Rogers -- End of Obligations

DOE Office of Scientific and Technical Information (OSTI.GOV)

Rogers, Matt

2010-09-30

Senior Advisor to the Secretary for Recovery Act Implementation Matt Rogers shares his thoughts as the Recovery Act reaches a critical milestone -- the end of the 2010 fiscal year and the last day to obligation contract and grant funding under the Recovery Act. For more information about the Recovery Act at the Department of Energy: http://www.energy.gov/recovery Follow the Department of Energy! http://facebook.com/energygov http://twitter.com/energy

Verification of the Multi-Axial, Temperature and Time Dependent (MATT) Failure Criterion

NASA Technical Reports Server (NTRS)

Richardson, David E.; Macon, David J.

2005-01-01

An extensive test and analytical effort has been completed by the Space Shuttle's Reusable Solid Rocket Motor (KSKM) nozzle program to characterize the failure behavior of two epoxy adhesives (TIGA 321 and EA946). As part of this effort, a general failure model, the "Multi-Axial, Temperature, and Time Dependent" or MATT failure criterion was developed. In the initial development of this failure criterion, tests were conducted to provide validation of the theory under a wide range of test conditions. The purpose of this paper is to present additional verification of the MATT failure criterion, under new loading conditions for the adhesives TIGA 321 and EA946. In many cases, the loading conditions involve an extrapolation from the conditions under which the material models were originally developed. Testing was conducted using three loading conditions: multi-axial tension, torsional shear, and non-uniform tension in a bondline condition. Tests were conducted at constant and cyclic loading rates ranging over four orders of magnitude. Tests were conducted under environmental conditions of primary interest to the RSRM program. The temperature range was not extreme, but the loading ranges were extreme (varying by four orders of magnitude). It should be noted that the testing was conducted at temperatures below the glass transition temperature of the TIGA 321 adhesive. However for the EA946, the testing was conducted at temperatures that bracketed the glass transition temperature.

Experimental Investigation of Gas/Slag/Matte/Tridymite Equilibria in the Cu-Fe-O-S-Si System in Controlled Atmospheres: Development of Technique

NASA Astrophysics Data System (ADS)

Fallah-Mehrjardi, Ata; Hidayat, Taufiq; Hayes, Peter C.; Jak, Evgueni

2017-12-01

The majority of primary pyrometallurgical copper making processes involve the formation of two immiscible liquid phases, i.e., matte product and the slag phase. There are significant gaps and discrepancies in the phase equilibria data of the slag and the matte systems due to issues and difficulties in performing the experiments and phase analysis. The present study aims to develop an improved experimental methodology for accurate characterisation of gas/slag/matte/tridymite equilibria in the Cu-Fe-O-S-Si system under controlled atmospheres. The experiments involve high-temperature equilibration of synthetic mixtures on silica substrates in CO/CO2/SO2/Ar atmospheres, rapid quenching of samples into water, and direct composition measurement of the equilibrium phases using Electron Probe X-ray Microanalysis (EPMA). A four-point-test procedure was applied to ensure the achievement of equilibrium, which included the following: (i) investigation of equilibration as a function of time, (ii) assessment of phase homogeneity, (iii) confirmation of equilibrium by approaching from different starting conditions, and (iv) systematic analysis of the reactions specific to the system. An iterative improved experimental methodology was developed using this four-point-test approach to characterize the complex multi-component, multi-phase equilibria with high accuracy and precision. The present study is a part of a broader overall research program on the characterisation of the multi-component (Cu-Fe-O-S-Si-Al-Ca-Mg), multi-phase (gas/slag/matte/metal/solids) systems with minor elements (Pb, Zn, As, Bi, Sn, Sb, Ag, and Au).

Procedural research for reporting of material test data using computer systems : the MATT System : Volume 1 : user manual.

DOT National Transportation Integrated Search

1978-08-01

The design and development of the MATT System was accomplished through task groups' approach. These task groups (one each for soil and base course, concrete, and hot mix) consisted of personnel from the Construction, Materials, Research and Developme...

Experimental Investigation of Gas/Slag/Matte/Tridymite Equilibria in the Cu-Fe-O-S-Si System in Controlled Gas Atmospheres: Experimental Results at 1473 K (1200 °C) and P(SO2) = 0.25 atm

NASA Astrophysics Data System (ADS)

Fallah-Mehrjardi, Ata; Hidayat, Taufiq; Hayes, Peter C.; Jak, Evgueni

2017-12-01

Experimental studies were undertaken to determine the gas/slag/matte/tridymite equilibria in the Cu-Fe-O-S-Si system at 1473 K (1200 °C), P(SO2) = 0.25 atm, and a range of P(O2)'s. The experimental methodology involved high-temperature equilibration using a substrate support technique in controlled gas atmospheres (CO/CO2/SO2/Ar), rapid quenching of equilibrium phases, followed by direct measurement of the chemical compositions of the phases with Electron Probe X-ray Microanalysis (EPMA). The experimental data for slag and matte were presented as a function of copper concentration in matte (matte grade). The data provided are essential for the evaluation of the effect of oxygen potential under controlled atmosphere on the matte grade, liquidus composition of slag and chemically dissolved copper in slag. The new data provide important accurate and reliable quantitative foundation for improvement of the thermodynamic databases for copper-containing systems.

Improved Multi-Axial, Temperature and Time Dependent (MATT) Failure Model

NASA Technical Reports Server (NTRS)

Richardson, D. E.; Anderson, G. L.; Macon, D. J.

2002-01-01

An extensive effort has recently been completed by the Space Shuttle's Reusable Solid Rocket Motor (RSRM) nozzle program to completely characterize the effects of multi-axial loading, temperature and time on the failure characteristics of three filled epoxy adhesives (TIGA 321, EA913NA, EA946). As part of this effort, a single general failure criterion was developed that accounted for these effects simultaneously. This model was named the Multi- Axial, Temperature, and Time Dependent or MATT failure criterion. Due to the intricate nature of the failure criterion, some parameters were required to be calculated using complex equations or numerical methods. This paper documents some simple but accurate modifications to the failure criterion to allow for calculations of failure conditions without complex equations or numerical techniques.

Evaluation and use of the Materials and Test (MATT) Data System for quality of construction and management review : final report.

DOT National Transportation Integrated Search

1985-12-01

This report documents the review of the MATerials and Test (MATT) Data System to check the validity of data within the system. A computer program to generate the quality level of a construction material was developed. Programs were also developed to ...

Polarization properties and microfacet-based modelling of white, grey and coloured matte diffuse reflection standards

NASA Astrophysics Data System (ADS)

Quast, T.; Schirmacher, A.; Hauer, K.-O.; Koo, A.

2018-02-01

To elucidate the influence of polarization in diffuse reflectometry, we performed a series of measurements in several bidirectional geometries and determined the Stokes parameters of the diffusely reflected radiation. Different types of matte reflection standards were used, including several common white standards and ceramic colour standards. The dependence of the polarization on the sample type, wavelength and geometry have been studied systematically, the main influence factors have been identified: The effect is largest at large angles of incidence or detection and at wavelengths where the magnitude of the reflectance is small. The results for the colour standards have been modelled using a microfacet-based reflection theory which is derived from the well-known model of Torrance and Sparrow. Although the theory is very simple and only has three free parameters, the agreement with the measured data is very good, all essential features of the data can be reproduced by the model.

The Effect of CaO on Gas/Slag/Matte/Tridymite Equilibria in Fayalite-Based Copper Smelting Slags at 1473 K (1200 °C) and P(SO2) = 0.25 Atm

NASA Astrophysics Data System (ADS)

Fallah-Mehrjardi, Ata; Hayes, Peter C.; Jak, Evgueni

2018-04-01

Fundamental experimental studies have been undertaken to determine the effect of CaO on the equilibria between the gas phase (CO/CO2/SO2/Ar) and slag/matte/tridymite phases in the Cu-Fe-O-S-Si-Ca system at 1473 K (1200 °C) and P(SO2) = 0.25 atm. The experimental methodology developed in the Pyrometallurgy Innovation Centre was used. New experimental data have been obtained for the four-phase equilibria system for fixed concentrations of CaO (up to 4 wt pct) in the slag phase as a function of copper concentration in matte, including the concentrations of dissolved sulfur and copper in slag, and Fe/SiO2 ratios in slag at tridymite saturation. The new data provided in the present study are of direct relevance to the pyrometallurgical processing of copper and will be used as an input to optimize the thermodynamic database for the copper-containing multi-component multi-phase system.

Evaluation of a Multi-Axial, Temperature, and Time Dependent (MATT) Failure Model

NASA Technical Reports Server (NTRS)

Richardson, D. E.; Anderson, G. L.; Macon, D. J.; Rudolphi, Michael (Technical Monitor)

2002-01-01

To obtain a better understanding the response of the structural adhesives used in the Space Shuttle's Reusable Solid Rocket Motor (RSRM) nozzle, an extensive effort has been conducted to characterize in detail the failure properties of these adhesives. This effort involved the development of a failure model that includes the effects of multi-axial loading, temperature, and time. An understanding of the effects of these parameters on the failure of the adhesive is crucial to the understanding and prediction of the safety of the RSRM nozzle. This paper documents the use of this newly developed multi-axial, temperature, and time (MATT) dependent failure model for modeling failure for the adhesives TIGA 321, EA913NA, and EA946. The development of the mathematical failure model using constant load rate normal and shear test data is presented. Verification of the accuracy of the failure model is shown through comparisons between predictions and measured creep and multi-axial failure data. The verification indicates that the failure model performs well for a wide range of conditions (loading, temperature, and time) for the three adhesives. The failure criterion is shown to be accurate through the glass transition for the adhesive EA946. Though this failure model has been developed and evaluated with adhesives, the concepts are applicable for other isotropic materials.

Experimental Investigation of Gas/Slag/Matte/Tridymite Equilibria in the Cu-Fe-O-S-Si System in Controlled Gas Atmosphere: Experimental Results at 1523 K (1250 °C) and P(SO2) = 0.25 atm

NASA Astrophysics Data System (ADS)

Fallah-Mehrjardi, Ata; Hidayat, Taufiq; Hayes, Peter C.; Jak, Evgueni

2018-04-01

To assist in the optimization of copper smelting and converting processes, accurate new measurements of the phase equilibria of the Cu-Fe-O-S-Si system have been undertaken. The experimental investigation was focused on the characterization of gas/slag/matte/tridymite equilibria in the Cu-Fe-O-S-Si system at 1523 K (1250 °C), P(SO2) = 0.25 atm, and a range of P(O2)s. The experimental methodology, developed in PYROSEARCH, includes high-temperature equilibration of samples on substrate made from the silica primary phase in controlled gas atmospheres (CO/CO2/SO2/Ar) followed by rapid quenching of the equilibrium condensed phases and direct measurement of the phase compositions with electron-probe X-ray microanalysis (EPMA). The data provided in the present study at 1523 K (1250 °C) and the previous study by the authors at 1473 K (1200 °C) has enabled the determination of the effects of temperature on the phase equilibria of the multicomponent multiphase system, including such characteristics as the chemically dissolved copper in slag and Fe/SiO2 ratio at silica saturation as a function of copper concentration in matte. The new data will be used in the optimization of the thermodynamic database for the copper-containing systems.

Letter to the editor concerning the article "Effects of acoustic feedback training in elite-standard Para-Rowing" by Schaffert and Mattes (2015).

PubMed

Hill, Holger

2015-01-01

In a case study, Schaffert and Mattes reported the application of acoustic feedback (sonification) to optimise the time course of boat acceleration. The authors attributed an increased boat speed in the feedback condition to an optimised boat acceleration (mainly during the recovery phase). However, in rowing it is biomechanically impossible to increase the boat speed significantly by reducing the fluctuations in boat acceleration during the rowing cycle. To assess such a, potentially small, optimising effect experimentally, the confounding variables must be controlled very accurately (that is especially the propulsive forces must be kept constant between experimental conditions or the differences in propulsive forces between conditions must be much smaller than the effects on boat speed resulting from an optimised movement pattern). However, this was not controlled adequately by the authors. Instead, the presented boat acceleration data show that the increased boat speed under acoustic feedback was due to increased propulsive forces.

Cleaning of a copper matte smelting slag from a water-jacket furnace by direct reduction of heavy metals.

PubMed

Maweja, Kasonde; Mukongo, Tshikele; Mutombo, Ilunga

2009-05-30

Cleaning experiments of a copper matte smelting slag from the water-jacket furnace was undertaken by direct reduction in a laboratory-scale electric furnace. The effects of coal-to-slag ratio, w, and the reduction time, t, were considered for two different coal/slag mixing procedures. In the first procedure, metallurgical coal was added to the molten slag, whereas in the second procedure, coal was premixed with the solid slag before charging into the furnace. The recovery of heavy metals (Cu, Co), and the fuming of Pb and Zn were investigated. Contamination of the metal phase by iron and the acidity index of the final slag were analysed as these may impede the economical viability of the process. The lower w value of 2.56% yielded a recovery rate of less than 60% for copper and less than 50% for cobalt, and around 70% for zinc. However, increasing w to 5% allowed the recovery of 70-90% for Cu, Co and Zn simultaneously after 30-60 min reduction of the molten slag. After reduction, the cleaned slags contained only small amounts of copper and cobalt (<0.4 wt%). Fuming of lead and zinc was efficient as the %Pb of the residual slag dropped to levels lower than 0.04% after 30 min of reduction. Ninety percent of the lead was removed from the initial slag and collected in the dusts. The zinc content of the cleaned slags quickly dropped to between 1 and 3 wt% from the initial 8.2% after 30 min reduction for w value of 5 and after 60 min reduction for w value of 2.56. The dusts contained about 60% Zn and 10% Pb. Recovery of lead from fuming of the slag was higher than 90% in all the experimental conditions considered in this study.

Mechanism of Selenium Loss in Copper Slag

NASA Astrophysics Data System (ADS)

Desai, Bhavin; Tathavadkar, Vilas; Basu, Somnath

2018-03-01

During smelting of copper sulfide concentrate, selenium is distributed between silica-saturated iron-silicate slag and copper-iron sulfide matte. The recovery coefficients of selenium between slag and matte were determined as a function of the initial concentration of selenium at 1523 K (1250 °C) under an inert atmosphere in a vertical tubular furnace. The initial concentration of selenium was varied by the addition of metallic selenium as well as selenium dioxide to the mixture of slag and matte. Analysis of the results indicated high affinity of selenium for matte. The apparent loss of selenium with the slag was attributed to the presence of selenium-enriched matte particles entrapped in the slag, rather than dissolved SeO2. The mechanisms proposed by previous investigators were discussed and also compared with the results of the present investigation.

Mechanism of Selenium Loss in Copper Slag

NASA Astrophysics Data System (ADS)

Desai, Bhavin; Tathavadkar, Vilas; Basu, Somnath

2018-06-01

During smelting of copper sulfide concentrate, selenium is distributed between silica-saturated iron-silicate slag and copper-iron sulfide matte. The recovery coefficients of selenium between slag and matte were determined as a function of the initial concentration of selenium at 1523 K (1250 °C) under an inert atmosphere in a vertical tubular furnace. The initial concentration of selenium was varied by the addition of metallic selenium as well as selenium dioxide to the mixture of slag and matte. Analysis of the results indicated high affinity of selenium for matte. The apparent loss of selenium with the slag was attributed to the presence of selenium-enriched matte particles entrapped in the slag, rather than dissolved SeO2. The mechanisms proposed by previous investigators were discussed and also compared with the results of the present investigation.

NREL Blows Up Batteries to Make the World Safer (Text Version) | NREL

Science.gov Websites

World Safer (Text Version) Making lithium-ion batteries safer for earthlings and astronauts is something very large explosions] Not like that. Matt blows up lithium-ion batteries to test them for safety. Matt technology used by NASA in outer space. Matt and his team study battery failure using innovative technologies

Matt Beard | NREL

Science.gov Websites

. McNichols, J. Gu, A.J. Nozik, A. Sellinger, G. Galli, M.C. Beard, "Tuning colloidal quantum dot band , 15257, 2017, DOI:10.1038/ncomms15257 Y. Yan, R. W. Crisp, J. Gu, B.D. Chernomodik, G.F. Pach, A.R . Marshall, J. A. Turner, M.C. Beard, "Multiple exciton generation for photoelectrochemical hydrogen

Matt Young | NREL

Science.gov Websites

(SIMS) of photovoltaic materials, and at present, this continues to be his nearly full-time pursuit. He , constructing, and maintaining the vacuum growth chamber. Research Interests SIMS of photovoltaic materials

Matt Wecker | NREL

Science.gov Websites

acetaldehyde from bacteria. The idea was to short-sheet the ethanol fermentation pathway to produce ; Biochem. (1995) "Fermentation strategies: Acetaldehyde or ethanol?," Process Biochem. (1987

Multi-Modal Interaction for Robotic Mules

DTIC Science & Technology

2014-02-26

Multi-Modal Interaction for Robotic Mules Glenn Taylor, Mike Quist, Matt Lanting, Cory Dunham , Patrick Theisen, Paul Muench Abstract...Taylor, Mike Quist, Matt Lanting, Cory Dunham , and Patrick Theisen are with Soar Technology, Inc. (corresponding author: 734-887- 7620; email: glenn...soartech.com; quist@soartech.com; matt.lanting@soartech.com; dunham @soartech.com; patrick.theisen@soartech.com Paul Muench is with US Army TARDEC

Effective separation technique for small diameter whiskers.

NASA Technical Reports Server (NTRS)

Westfall, L. J.

1972-01-01

Description of a technique for separating small-diameter whiskers from the as-grown matt by gently agitating the whisker matts in a solution of deionized or distilled water for six to eight hours. High-strength Al2O3 whiskers were effectively separated by this technique, comprising an average 48% of the original weight of the whisker matt. According to estimation, more than 90% of separated whiskers had diameters between 0.7 and 2.0 microns.

Impact location of objects hitting the water surface

NASA Astrophysics Data System (ADS)

Kadri, Usama

2017-04-01

Analysis of data, recorded on March 8th 2014 at the Comprehensive Test ban Treaty Organisation's hydroacoustic station off Cape Leeuwin Western Australia, reveal pressure signatures of objects impacting at the sea surface which could be associated with falling meteorites as well as the missing Malaysian MH370 airplane. The location of the sources are identified analytically by an inverse solution based on acoustic-gravity wave theory (e.g. see references below) which have been developed and validated experimentally. Apart from the direct contribution to the search efforts after the missing airplane, the method we describe here is very efficient for identifying the location of sources that result in a sudden change in the water pressure in general. References 1. T.Yamamoto,1982.Gravity waves and acoustic waves generated by submarine earthquakes, Soil Dyn. Earthquake Eng., 1, 75-82. 2. M. Stiassnie, 2010. Tsunamis and acoustic-gravity waves from underwater earthquakes, J. Eng. Math., 67, 23-32, doi:10.1007/s10665-009-9323-x. 3. U. Kadri and M. Staissnie, 2012. Acoustic-gravity waves interacting with the shelf break. J. Geophys. Res., 117, C03035, doi: 10.1029/2011JC007674. 4. E. Eyov, A. Klar, U. Kadri and M. Stiassnie, 2013. Progressive waves in a compressible ocean with elastic bottom, Wave Motion 50, 929-939. doi: 10.1016/j.wavemoti.2013.03.003 5. G. Hendin and M. Stiassnie, 2013. Tsunami and acoustic-gravity waves in water of constant depth, Phys. Fluids 25, 086103, doi: 10.1063/1.481799. 6. U. Kadri, 2016. Acoustic-gravity waves from an oscillating ice-block in arctic zones. Advances in Acoustics and Vibration, 8076108, http://dx.doi.org/10.1155/2016/8076108 7. T.C.A. Oliveira, U. Kadri, 2016. Acoustic-gravity waves from the 2004 Indian Ocean earthquake and tsunami. Journal of Geophysical Research: Oceans. doi: 10.1002/2016JC011742

40 CFR 57.503 - Control measures.

Code of Federal Regulations, 2010 CFR

2010-07-01

..., installation and proper operation of primary hoods on all active matte tap holes, matte launders, slag skim..., installation and proper operation of primary hoods on all active slag and lead bullion furnace tap holes and...

Intellectual Disability

MedlinePlus

... Tips for teachers Tips for parents Organizations Matthew’s Story Matt is 15 years old. Because Matt has ... strives to be ever conscious of accessibility in technology. In compliance with Section 508 of the Rehabilitation ...

A non-destructive spectroscopic study of the decoration of archaeological pottery: from matt-painted bichrome ceramic sherds (southern Italy, VIII-VII B.C.) to an intact Etruscan cinerary urn

NASA Astrophysics Data System (ADS)

Bruni, Silvia; Guglielmi, Vittoria; Della Foglia, Elena; Castoldi, Marina; Bagnasco Gianni, Giovanna

2018-02-01

A study is presented based on the use of entirely non-destructive spectroscopic techniques to analyze the chemical composition of the painted surface layer of archaeological pottery. This study aims to define both the raw materials and the working technology of ancient potters. Energy-dispersive X-ray analysis, micro-Raman spectroscopy, visible and near infrared (NIR) diffuse reflection spectroscopy and external reflection Fourier-transform infrared (FTIR) spectroscopy were applied to matt-painted bichrome pottery sherds (VIII-VII century B.C.) from the site of Incoronata near Metaponto in southern Italy. Two different raw materials, ochre and iron-rich clay, were recognized for the red decoration, while the dark areas resulted to have been obtained by the so-called manganese black technique. In any case, it was demonstrated that the decoration was applied before firing, in spite of its sometimes grainy aspect that could suggest a post-firing application. For the samples with a more sophisticated decorative pattern a red/black/white polychromy was recognized, as the lighter areas correspond to an ;intentional white; obtained by the firing of a calcium-rich clay. Reflection spectroscopy in the visible-NIR and mid-IR as well as micro-Raman spectroscopy were then employed to characterize the decoration of an intact ceramic urn from the Etruscan town of Chiusi, evidencing a post-firing painting based on the use of red ochre, carbon black and lime, possibly imitating the ;fresco; technique used in wall paintings.

78 FR 19128 - Approval and Promulgation of Air Quality Implementation Plans; Ohio; Particulate Matter Standards

Federal Register 2010, 2011, 2012, 2013, 2014

2013-03-29

... holidays. We recommend that you telephone Matt Rau, Environmental Engineer, at (312) 886-6524 before visiting the Region 5 office. FOR FURTHER INFORMATION CONTACT: Matt Rau, Environmental Engineer, Control..., Restrictions on Particulate Emissions from Industrial Sources, on December 13, 2011. The revised rule was...

What makes a feather shine? A nanostructural basis for glossy black colours in feathers.

PubMed

Maia, Rafael; D'Alba, Liliana; Shawkey, Matthew D

2011-07-07

Colours in feathers are produced by pigments or by nanostructurally organized tissues that interact with light. One of the simplest nanostructures is a single layer of keratin overlying a linearly organized layer of melanosomes that create iridescent colours of feather barbules through thin-film interference. Recently, it has been hypothesized that glossy (i.e. high specular reflectance) black feathers may be evolutionarily intermediate between matte black and iridescent feathers, and thus have a smooth keratin layer that produces gloss, but not the layered organization of melanosomes needed for iridescence. However, the morphological bases of glossiness remain unknown. Here, we use a theoretical approach to generate predictions about morphological differences between matte and glossy feathers that we then empirically test. Thin-film models predicted that glossy spectra would result from a keratin layer 110-180 nm thick and a melanin layer greater than 115 nm thick. Transmission electron microscopy data show that nanostructure of glossy barbules falls well within that range, but that of matte barbules does not. Further, glossy barbules had a thinner and more regular keratin cortex, as well as a more continuous underlying melanin layer, than matte barbules. Thus, their quasi-ordered nanostructures are morphologically intermediate between matte black and iridescent feathers, and perceived gloss may be a form of weakly chromatic iridescence.

40 CFR 61.176 - Recordkeeping requirements.

Code of Federal Regulations, 2010 CFR

2010-07-01

... malfunctions of the air pollution control system; (6) All periods during which any continuous monitoring system or device is inoperative; (7) All maintenance and repairs performed on each air pollution control... copper matte and lead matte charged to the copper converter and the total hours of operation. (2) For...

Stationary Fuel Cell Systems Analysis | Hydrogen and Fuel Cells | NREL

Science.gov Websites

Post, Presented at the 2016 DOE Annual Merit Review Meeting (June 2016) Transportation Big Data Ainscough, Sam Sprik, and Matt Post (December 2015) Stationary Fuel Cell Evaluation: 2015 Annual Merit Quarter 4 of 2014, Genevieve Saur, Jennifer Kurtz, Chris Ainscough, Sam Sprik, and Matt Post (April 2015

Ten Things to Consider when Teaching Proof

ERIC Educational Resources Information Center

Cirillo, Michelle

2009-01-01

As she sat in a high school geometry class and observed a beginning teacher, Matt (a pseudonym), teaching proof for the first time, the author was reminded of her own experiences in teaching formal proof to secondary school students. Matt seemed to struggle with some of the same challenges she encountered when she began teaching proof. For…

Optical characterization of display screens by speckle patterns

NASA Astrophysics Data System (ADS)

Pozo, Antonio M.; Castro, José J.; Rubiño, Manuel

2013-10-01

In recent years, flat-panel display (FPD) technology has undergone great development, and now FPDs appear in many devices. A significant element in FPD manufacturing is the display front surface. Manufacturers sell FPDs with different types of front surfaces, which can be matte (also called anti-glare) or glossy screens. Users who prefer glossy screens consider these displays to show more vivid colors compared with matte-screen displays. However, on the glossy screens, external light sources may cause unpleasant reflections that can be reduced by a matte treatment in the front surface. In this work, we present a method to characterize FPD screens using laser-speckle patterns. We characterize three FPDs: a Samsung XL2370 LCD monitor of 23 in. with matte screen, a Toshiba Satellite A100 LCD laptop of 15.4 in. with glossy screen, and a Grammata Papyre 6.1 electronic book reader of 6 in. with ePaper screen (E-ink technology). The results show great differences in speckle-contrast values for the three screens characterized and, therefore, this work shows the feasibility of this method for characterizing and comparing FPDs that have different types of front surfaces.

Optical characterization of display screens by speckle-contrast measurements

NASA Astrophysics Data System (ADS)

Pozo, Antonio M.; Castro, José J.; Rubiño, Manuel

2012-10-01

In recent years, the flat-panel display (FPD) technology has undergone great development. Currently, FPDs are present in many devices. A significant element in FPD manufacturing is the display front surface. Manufacturers sell FPDs with different types of front surface which can be matte (also called anti-glare) or glossy screens. Users who prefer glossy screens consider images shown in these types of displays to have more vivid colours compared with matte-screen displays. However, external light sources may cause unpleasant reflections on the glossy screens. These reflections can be reduced by a matte treatment in the front surface of FPDs. In this work, we present a method to characterize the front surface of FPDs using laser speckle patterns. We characterized three FPDs: a Samsung XL2370 LCD monitor of 23" with matte screen, a Toshiba Satellite A100 laptop of 15.4" with glossy screen, and a Papyre electronic book reader. The results show great differences in speckle contrast values for the three screens characterized and, therefore, this work shows the feasibility of this method for characterizing and comparing FPDs which have different types of front surfaces.

Very high-resolution seismo-acoustic imaging of seagrass meadows (Mediterranean Sea): Implications for carbon sink estimates

NASA Astrophysics Data System (ADS)

Lo Iacono, Claudio; Mateo, Miguel Angel; Gràcia, Eulàlia; Guasch, Lluis; Carbonell, Ramon; Serrano, Laura; Serrano, Oscar; Dañobeitia, Juanjo

2008-09-01

Posidonia oceanica is a widespread coastal Mediterranean seagrass which accumulates in its subsurface large quantities of organic material derived from its roots, rhizomes and leaf sheaths embedded in sandy sediments. These organic deposits may be up to several meters thick as they accumulate over thousands of years forming the matte, whose high content in organic carbon plays a major role in the global ocean carbon cycle. In this study, very high-resolution seismo-acoustic methods were applied to image the subsurface features of a P. oceanica seagrass meadow at Portlligat (Cadaqués, Girona, Spain), in the NW-Mediterranean Sea. Our findings yield fresh insights into the settling of the P. oceanica meadow in the study area, and define with unprecedented detail the potential volume occupied by the matte. A strong reflector, located from 4.3 to 11.7 m depth, was recognized in several seismo-acoustic profiles as the substratum on which P. oceanica first settled in the study area. A 3D bathymetric model of this substratum allowed us to reconstruct the Portlligat palaeo-environment prior to the settling of P. oceanica, which corresponded to a shallow coastal setting protected from the open sea. A core drilled in the meadow at Portlligat revealed the presence of a 6 m thick dense matte composed of medium to coarse sandy sediments mixed with plant debris and bioclasts. Radiocarbon datings revealed a constant accretion rate of the matte of about 1.1 m/kyr. Gravelly bioclastic deposits observed at the base of the core correspond to the base of the matte and gave a date of 5616 +/- 46 Cal yr BP. For the first time, very high-resolution marine geophysical techniques allowed us to accurately define the volume occupied by P. oceanica matte, which in the study area reaches up to almost 220,000 +/- 17,400 m3. This result is an important step forward in our efforts to estimate the size of the carbon sink represented by P. oceanica meadows along the Mediterranean coasts

Test Generator for MATLAB Simulations

NASA Technical Reports Server (NTRS)

Henry, Joel

2011-01-01

MATLAB Automated Test Tool, version 3.0 (MATT 3.0) is a software package that provides automated tools that reduce the time needed for extensive testing of simulation models that have been constructed in the MATLAB programming language by use of the Simulink and Real-Time Workshop programs. MATT 3.0 runs on top of the MATLAB engine application-program interface to communicate with the Simulink engine. MATT 3.0 automatically generates source code from the models, generates custom input data for testing both the models and the source code, and generates graphs and other presentations that facilitate comparison of the outputs of the models and the source code for the same input data. Context-sensitive and fully searchable help is provided in HyperText Markup Language (HTML) format.

Effect of silicon on activity coefficients of siderophile elements (Au, Pd, Pt, P, Ga, Cu, Zn, and Pb) in liquid Fe: Roles of core formation, late sulfide matte, and late veneer in shaping terrestrial mantle geochemistry

NASA Astrophysics Data System (ADS)

Righter, K.; Pando, K.; Humayun, M.; Waeselmann, N.; Yang, S.; Boujibar, A.; Danielson, L. R.

2018-07-01

the Au, Pd, and Pt contents to values near the current day BSE. On the other hand, removal of 0.2-1.0% of a late sulfide-rich matte to the core would lower the Au, Pd, and Pt concentrations in the mantle, but not to chondritic relative concentrations observed in the BSE. If sulfide matte is called upon to remove HSEs, they must be later added via a late veneer to re-establish the high and chondritic relative PUM concentrations. These results suggest that although accretion and core formation (involving a Si, S, and C-bearing metallic liquid) were the primary processes establishing many of Earth's mantle volatile elements and HSE, a secondary removal process is required to establish HSEs at their current and near-chondritic relative BSE levels. Mn and P - two siderophile elements that are central to biochemical processes (photosynthesis and triphosphates, respectively) - have significant and opposite interactions with FeSi liquids, and their mantle concentrations would be notably different if Earth had a Si-free core.

Application of Detailed Chemical Kinetics to Combustion Instability Modeling

DTIC Science & Technology

2016-01-04

Modeling 5a. CONTRACT NUMBER 5b. GRANT NUMBER 5c. PROGRAM ELEMENT NUMBER 6. AUTHOR(S) Harvazinski, Matt; Talley, Doug; Sankaran, Venke 5d. PROJECT...Chemical Kinetics to Combustion Instability Modeling Matt Harvazinski, Doug Talley, Venke Sankaran Air Force Research Laboratory Edwards AFB, CA...distribution unlimited. 3 Prior Work – Kinetics Used • Simulations : 1) 3D real geometry 2) Unsteady 3) Long run-times 4) Coupled physics • 1- 4

Radar Imaging and Target Identification

DTIC Science & Technology

2009-02-09

Ferrara , Ph.D. May 2006, now in RYAT. Thesis title: "Radar Signal Process- ing". • Postdoc supported by China Scholarship Council: Dr. Ling Wang...of the latter visits, I have brought with me Birsen Yazici, Liz Rachele, and/or Matt Ferrara . 2.3 Summer jobs for students • As part of his SMART...fellowship, Matt Ferrara spent the summer of 2006 in RYAT at Wright-Patterson, where he remained in the fall to finish his dissertation and where he

Modulatory Effect of Aerobic Physical Activity on Synaptic Ultrastructure in the Old Mouse Hippocampus.

PubMed

Fattoretti, Patrizia; Malatesta, Manuela; Cisterna, Barbara; Milanese, Chiara; Zancanaro, Carlo

2018-01-01

Aerobic physical exercise (APE) leads to improved brain functions. To better understand the beneficial effect of APE on the aging brain, a morphometric study was carried out of changes in hippocampal synapses of old (>27 months) Balb/c mice undergoing treadmill training (OTT) for 4 weeks in comparison with old sedentary (OS), middle-aged sedentary (MAS) and middle-aged treadmill training (MATT) mice. The inner molecular layer of the hippocampal dentate gyrus (IMLDG) and the molecular stratum of Ammon's horn1 neurons (SMCA1) were investigated. The number of synapses per cubic micron of tissue (numeric density, Nv), overall synaptic area per cubic micron of tissue (surface density, Sv), average area of synaptic contact zones (S), and frequency (%) of perforated synapses (PS) were measured in electron micrographs of ethanol-phosphotungstic acid (E-PTA) stained tissue. Data were analyzed with analysis of variance (ANOVA). In IMLDG, an effect of age was found for Nv and Sv, but not S and %PS. Similar results were found for exercise and the interaction of age and exercise. In post hoc analysis Nv was higher (60.6% to 75.1%; p < 0.001) in MATT vs. MAS, OS and OTT. Sv was higher (32.3% to 54.6%; p < 0.001) in MATT vs. MAS, OS and OTT. In SMCA1, age affected Nv, Sv and %PS, but not S. The effect of exercise was significant for Sv only. The interaction of age and exercise was significant for Nv, Sv and %PS. In post hoc analysis Nv was lower in OS vs. MAS, MATT and OTT (-26.1% to -32.1%; p < 0.038). MAS and OTT were similar. Sv was lower in OS vs. MAS, MATT and OTT (-23.4 to -30.3%, p < 0.004). MAS and OTT were similar. PS frequency was higher in OS vs. MAS, MATT and OTT (48.3% to +96.6%, p < 0.023). APE positively modulated synaptic structural dynamics in the aging hippocampus, possibly in a region-specific way. The APE-associated reduction in PS frequency in SMCA1 of old mice suggests that an increasing complement of PS is a compensatory phenomenon to maintain synaptic

Phototaxis and polarotaxis hand in hand: night dispersal flight of aquatic insects distracted synergistically by light intensity and reflection polarization.

PubMed

Boda, Pál; Horváth, Gábor; Kriska, György; Blahó, Miklós; Csabai, Zoltán

2014-05-01

Based on an earlier observation in the field, we hypothesized that light intensity and horizontally polarized reflected light may strongly influence the flight behaviour of night-active aquatic insects. We assumed that phototaxis and polarotaxis together have a more harmful effect on the dispersal flight of these insects than they would have separately. We tested this hypothesis in a multiple-choice field experiment using horizontal test surfaces laid on the ground. We offered simultaneously the following visual stimuli for aerial aquatic insects: (1) lamplit matte black canvas inducing phototaxis alone, (2) unlit shiny black plastic sheet eliciting polarotaxis alone, (3) lamplit shiny black plastic sheet inducing simultaneously phototaxis and polarotaxis, and (4) unlit matte black canvas as a visually unattractive control. The unlit matte black canvas trapped only a negligible number (13) of water insects. The sum (16,432) of the total numbers of water beetles and bugs captured on the lamplit matte black canvas (7,922) and the unlit shiny black plastic sheet (8,510) was much smaller than the total catch (29,682) caught on the lamplit shiny black plastic sheet. This provides experimental evidence for the synergistic interaction of phototaxis (elicited by the unpolarized direct lamplight) and polarotaxis (induced by the strongly and horizontally polarized plastic-reflected light) in the investigated aquatic insects. Thus, horizontally polarizing artificial lamplit surfaces can function as an effective ecological trap due to this synergism of optical cues, especially in the urban environment.

Phototaxis and polarotaxis hand in hand: night dispersal flight of aquatic insects distracted synergistically by light intensity and reflection polarization

NASA Astrophysics Data System (ADS)

Boda, Pál; Horváth, Gábor; Kriska, György; Blahó, Miklós; Csabai, Zoltán

2014-05-01

Based on an earlier observation in the field, we hypothesized that light intensity and horizontally polarized reflected light may strongly influence the flight behaviour of night-active aquatic insects. We assumed that phototaxis and polarotaxis together have a more harmful effect on the dispersal flight of these insects than they would have separately. We tested this hypothesis in a multiple-choice field experiment using horizontal test surfaces laid on the ground. We offered simultaneously the following visual stimuli for aerial aquatic insects: (1) lamplit matte black canvas inducing phototaxis alone, (2) unlit shiny black plastic sheet eliciting polarotaxis alone, (3) lamplit shiny black plastic sheet inducing simultaneously phototaxis and polarotaxis, and (4) unlit matte black canvas as a visually unattractive control. The unlit matte black canvas trapped only a negligible number (13) of water insects. The sum (16,432) of the total numbers of water beetles and bugs captured on the lamplit matte black canvas (7,922) and the unlit shiny black plastic sheet (8,510) was much smaller than the total catch (29,682) caught on the lamplit shiny black plastic sheet. This provides experimental evidence for the synergistic interaction of phototaxis (elicited by the unpolarized direct lamplight) and polarotaxis (induced by the strongly and horizontally polarized plastic-reflected light) in the investigated aquatic insects. Thus, horizontally polarizing artificial lamplit surfaces can function as an effective ecological trap due to this synergism of optical cues, especially in the urban environment.

The effects of surface gloss and roughness on color constancy for real 3-D objects.

PubMed

Granzier, Jeroen J M; Vergne, Romain; Gegenfurtner, Karl R

2014-02-21

Color constancy denotes the phenomenon that the appearance of an object remains fairly stable under changes in illumination and background color. Most of what we know about color constancy comes from experiments using flat, matte surfaces placed on a single plane under diffuse illumination simulated on a computer monitor. Here we investigate whether material properties (glossiness and roughness) have an effect on color constancy for real objects. Subjects matched the color and brightness of cylinders (painted red, green, or blue) illuminated by simulated daylight (D65) or by a reddish light with a Munsell color book illuminated by a tungsten lamp. The cylinders were either glossy or matte and either smooth or rough. The object was placed in front of a black background or a colored checkerboard. We found that color constancy was significantly higher for the glossy objects compared to the matte objects, and higher for the smooth objects compared to the rough objects. This was independent of the background. We conclude that material properties like glossiness and roughness can have significant effects on color constancy.

Design options for a bunsen reactor.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Moore, Robert Charles

2013-10-01

This work is being performed for Matt Channon Consulting as part of the Sandia National Laboratories New Mexico Small Business Assistance Program (NMSBA). Matt Channon Consulting has requested Sandia's assistance in the design of a chemical Bunsen reactor for the reaction of SO2, I2 and H2O to produce H2SO4 and HI with a SO2 feed rate to the reactor of 50 kg/hour. Based on this value, an assumed reactor efficiency of 33%, and kinetic data from the literature, a plug flow reactor approximately 1%E2%80%9D diameter and and 12 inches long would be needed to meet the specification of the project.more » Because the Bunsen reaction is exothermic, heat in the amount of approximately 128,000 kJ/hr would need to be removed using a cooling jacket placed around the tubular reactor. The available literature information on Bunsen reactor design and operation, certain support equipment needed for process operation and a design that meet the specification of Matt Channon Consulting are presented.« less

Role of microstructure in caustic stress corrosion cracking of Alloy 690

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mertz, D.A.; Duda, P.T.; Pica, P.N.

1995-12-31

Alloy 690 has been selected for nuclear heat transport system tubing application in recent commercial reactor plants due to its resistance to multiple types of corrosion attack. Typical corn final heat treatments for this material are a mill-anneal (MA, approximately 1,070 C) to completely dissolve the carbides and develop the final grain structure plus a thermal treatment (TT, approximately 700 C) to precipitate carbides at the grain boundaries. Tubing with grain boundary carbides and no or few intragranular carbides has been found resistant to intergranular stress corrosion cracking (IGSCC) in caustic environments. In this work, first, Alloy 690 plate wasmore » subjected to a variety of MA and MA-TT heat treatments to create microstructures of carbide-decorated grain boundaries and undecorated boundaries. Caustic IGSCC test results were consistent with tubing data. Second, experiments were conducted to understand the mechanism by which caustic-corrosion resistance is imparted to Alloy 690 by grain boundary carbides. Tubing with a fully-developed MA-TT carbide microstructure was strained and heat-treated to create a mixed microstructure of new grain boundaries with no carbide precipitate decoration, intermixed with intragranular carbide strings from prior grain boundaries. Caustic SCC performance of this material was identical to that of material with the MA-TT carbide-decorated grain boundaries. This work suggests that the fundamental cause of good IGSCC resistance of MA-TT Alloy 690 in caustic does not derive solely from grain boundary carbides. It is suggested that matrix strength, as measured by yield stress, could be a controlling factor.« less

MATTS- A Step Towards Model Based Testing

NASA Astrophysics Data System (ADS)

Herpel, H.-J.; Willich, G.; Li, J.; Xie, J.; Johansen, B.; Kvinnesland, K.; Krueger, S.; Barrios, P.

2016-08-01

In this paper we describe a Model Based approach to testing of on-board software and compare it with traditional validation strategy currently applied to satellite software. The major problems that software engineering will face over at least the next two decades are increasing application complexity driven by the need for autonomy and serious application robustness. In other words, how do we actually get to declare success when trying to build applications one or two orders of magnitude more complex than today's applications. To solve the problems addressed above the software engineering process has to be improved at least for two aspects: 1) Software design and 2) Software testing. The software design process has to evolve towards model-based approaches with extensive use of code generators. Today, testing is an essential, but time and resource consuming activity in the software development process. Generating a short, but effective test suite usually requires a lot of manual work and expert knowledge. In a model-based process, among other subtasks, test construction and test execution can also be partially automated. The basic idea behind the presented study was to start from a formal model (e.g. State Machines), generate abstract test cases which are then converted to concrete executable test cases (input and expected output pairs). The generated concrete test cases were applied to an on-board software. Results were collected and evaluated wrt. applicability, cost-efficiency, effectiveness at fault finding, and scalability.

The four antinomies of the death instinct.

PubMed

Blanco, Ignacio Matte

2005-10-01

Matte Blanco examines four paradoxical positions that arise out of Freud's writings on the death instinct. He notes that death is not a content known to the unconscious. Furthermore, the absence of time and space in the unconscious means that the conditions necessary for any process such as instinct are similarly absent. Matte Blanco demonstrates the way in which the antinomies that he explores can be explained in terms of the logics that obtain in the unconscious, and he suggests that the concept of the death instinct is one of the most profound expressions of the relationship between the modes that underlie conscious and unconscious logic.

Rose-Colored Jupiter

NASA Image and Video Library

2018-03-15

This image captures a close-up view of a storm with bright cloud tops in the northern hemisphere of Jupiter. NASA's Juno spacecraft took this color-enhanced image on Feb. 7 at 5:38 a.m. PST (8:38 a.m. EST) during its 11th close flyby of the gas giant planet. At the time, the spacecraft was 7,578 miles (12,195 kilometers) from the tops of Jupiter's clouds at 49.2 degrees north latitude. Citizen scientist Matt Brealey processed the image using data from the JunoCam imager. Citizen scientist Gustavo B C then adjusted colors and embossed Matt Brealey's processing of this storm. https://photojournal.jpl.nasa.gov/catalog/PIA21981

NREL Blows Up Batteries to Make the World Safer

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

Making lithium-ion batteries safer for earthlings and astronauts is something NREL excels at. In this video you’ll meet Matt Keyser, a senior energy storage engineer who is on a mission to improve the thermal performance of batteries for electric vehicles, consumer gadgets, and technology used by NASA in outer space. Matt and his team study battery failure using innovative technologies, such as the award-winning Battery Internal Short Circuit (ISC) Device that can precisely identify weak spots in battery cells. This cutting-edge research helps battery manufacturers develop advanced materials that can deliver superior results. Who benefits from all of this ingenuitymore » rooted in fundamental science? We all do!« less

2. Signal Tower, looking east. Delaware, Lackawanna & Western ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

2. Signal Tower, looking east. - Delaware, Lackawanna & Western Railroad, Scranton Yards, Mattes Street Signal Tower, 80 feet Southwest of Railroad Alley & Cedar Avenue, Scranton, Lackawanna County, PA

Failure Mode and Effects Analysis (FMEA) Introductory Overview

DTIC Science & Technology

2012-06-14

Failure Mode and Effects Analysis ( FMEA ) Introductory Overview TARDEC Systems Engineering Risk Management Team POC: Kadry Rizk or Gregor Ratajczak...2. REPORT TYPE Briefing Charts 3. DATES COVERED 01-05-2012 to 23-05-2012 4. TITLE AND SUBTITLE Failure Mode and Effects Analysis ( FMEA ) 5a...18 WELCOME Welcome to “An introductory overview of Failure Mode and Effects Analysis ( FMEA )”, A brief concerning the use and benefits of FMEA

3. West elevation of Signal Tower. Delaware, Lackawanna & ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

3. West elevation of Signal Tower. - Delaware, Lackawanna & Western Railroad, Scranton Yards, Mattes Street Signal Tower, 80 feet Southwest of Railroad Alley & Cedar Avenue, Scranton, Lackawanna County, PA

77 FR 70155 - Notice of Intent To Prepare an Environmental Impact Statement for the Disposal and Reuse of the...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-11-23

... human and natural environments, including potential impacts on topography, geology and soils, water... by mail or email by November 30, 2012, to Mr. Matt Butwin, Ecology and Environment, Inc., 348...

77 FR 64110 - Notice of Intent To Prepare an Environmental Impact Statement for the Disposal and Reuse of the...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-10-18

... human and natural environments, including potential impacts on topography, geology and soils, water... or email by October 24, 2012, to Mr. Matt Butwin, Ecology and Environment, Inc., 348 Southport Circle...

Effect of incidence/observation angles and angular diversity on speckle reduction by wavelength diversity in laser projection systems.

PubMed

Yamada, Hirotaka; Moriyasu, Kengo; Sato, Hiroto; Hatanaka, Hidekazu

2017-12-11

The speckle reduction for laser projectors has been vigorously studied because speckle causes a serious deterioration in image quality. Most speckle reduction methods can be categorized into wavelength diversity, angular diversity and polarization diversity, which are usually treated independently. In this paper, it is shown that the effect of wavelength diversity and angular diversity on speckle reduction is not independent, and that the effect of wavelength also depends on incidence and observation angles on screen. The speckle reduction effect by wavelength diversity is smaller when the angular diversity is larger. Also, the speckle reduction effect is investigated on various screens including matte and silver screens, and it is shown that the effect of wavelength diversity is larger on matte screen than on silver screen.

7. Detail of first floor doorway to Signal Tower. ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

7. Detail of first floor doorway to Signal Tower. - Delaware, Lackawanna & Western Railroad, Scranton Yards, Mattes Street Signal Tower, 80 feet Southwest of Railroad Alley & Cedar Avenue, Scranton, Lackawanna County, PA

The Endurance Bioenergy Reactor

DOE Office of Scientific and Technical Information (OSTI.GOV)

Laible, Philip; Michaund, Matt

2012-07-03

Argonne biophysicist Dr. Philip Laible and Air Force Major Matt Michaud talks about he endurance bioenergy reactor—a device that contains bacteria that can convert energy from the sun into fuel molecules.

6. Detail of windows in north wall of Signal Tower. ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

6. Detail of windows in north wall of Signal Tower. - Delaware, Lackawanna & Western Railroad, Scranton Yards, Mattes Street Signal Tower, 80 feet Southwest of Railroad Alley & Cedar Avenue, Scranton, Lackawanna County, PA

ARC-2006-ACD06-0091-001

NASA Image and Video Library

2006-06-05

Space shuttle STS-121 FIT (Fly Immunity and Tumors) payload. Using Drosophila (fruit fly) to complete the experiments. Matt Lera doing sample preparation for post light analysis of Drosophila melanogaster (fruit fly) larva

75 FR 40851 - Notice Pursuant to the National Cooperative Research and Production Act of 1993; Advanced Media...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-07-14

...), Las Vegas, NV, have been added as parties to this venture. Also, eBus Limited, Auckland, NEW ZEALAND; Lifetime, New York, NY; RPPtv, Midhurst, K. Sussex, UNITED KINGDOM; and Matt Beard (individual member...

Evaluation of Louisiana's statistically based quality control and acceptance specifications for asphaltic concrete : final report.

DOT National Transportation Integrated Search

1998-09-01

In 1971, the Louisiana Department of Transportation and Development initiated a statistically based specification system for asphaltic concrete using historically generated data. A Materials Test Data (MATT) reporting system was also started to archi...

SLS INTERTANK TEST ARTICLE IS ATTACHED TO CROSSHEAD OF LOAD TEST ANNEX, BLDG. 4619, AND REMOVED FROM BED OF KMAG TRANSPORTER

NASA Image and Video Library

2018-03-28

SLS INTERTANK TEST ARTICLE IS ATTACHED TO CROSSHEAD OF LOAD TEST ANNEX, BLDG. 4619, AND REMOVED FROM BED OF KMAG TRANSPORTER. Matt Cash conducts tag up meeting before lift of ITA from KMAG transporter

Failure Criterion For Isotropic Time Dependent Materials Which Accounts for Multi-Axial Loading

NASA Technical Reports Server (NTRS)

Richardson, D. E.; Anderson, G. L.; Macon, D. J.

2003-01-01

The Space Shuttle's Reusable Solid Rocket Motor (RSRM) nozzle program has recently conducted testing to characterize the effects of multi-axial loading, temperature and time on the failure characteristics of TIGA321, EA913NA, EA946 (three filled epoxy adhesives). From the test data a "Multi-Axial, Temperature, and Time Dependent" or MATT failure criterion was developed. It is shown that this criterion simplifies, for constant load and constant load rate conditions, into a form that can be easily used for stress analysis. Failure for TIGA321 and EA913NA are characterized below their glass transition temperature. Failure for EA946 is characterized for conditions that pass through its glass transition. The MATT failure criterion is shown to be accurate for a wide range of conditions for these adhesives.

Physical Activity | NIH MedlinePlus the Magazine

MedlinePlus

... pdf Child Nutrition: https://medlineplus.gov/childnutrition.html Secrets to Making School Lunches Kids Won't Want ... gov/health/educational/wecan/news-events/matte14.htm Secrets to Making Healthy and Fun School Lunches: http:// ...

Alternative Fuel Vehicle Publications | Transportation Research | NREL

Science.gov Websites

from a Fleet of Class 6 Trucks Operating on Gas-to-Liquid Fuel and Catalyzed Diesel Particle Filters Particle Filters. Teresa Alleman, Leslie Eudy, Matt Miyasato, Adewale Oshinuga, Scott Allison, Tom Corcoran

78 FR 13873 - Environmental Impacts Statements; Notice of Availability

Federal Register 2010, 2011, 2012, 2013, 2014

2013-03-01

..., CA, Middle Fork American River Project, Review Period Ends: 04/01/2013, Contact: Matt Buhyoff 202-502.... 20130048, Draft EIS, BOEM, 00, Gulf of Mexico OCS Oil and Gas Lease Sales: 2014 and 2016 Eastern Planning...

Tsunami mitigation - redistribution of energy

NASA Astrophysics Data System (ADS)

Kadri, Usama

2017-04-01

.1007/1-4020-3607-8 3 3. E. Check, 2005. Natural disasters: Roots of recovery. Nature 438, 910-911, doi:10.1038/438910a. 4. A. M. Fridman, L. S. Alperovich, L. Shemer, L. Pustil'nik, D. Shtivelman, A. G. Marchuk, D. Liberzon, 2010. Tsunami wave suppression using submarine barriers. Phys. Usp. 53 809-816, doi:10.3367/UFNe.0180.201008d.0843. 5. U. Kadri, M. Stiassnie, 2013. Generation of an acoustic-gravity wave by two gravity waves, and their mutual interaction. J. Fluid Mech. 735, R6, doi:10.1017/jfm.2013.539. 6. U. Kadri, 2015. Wave motion in a heavy compressible fluid: revisited. European Journal of Mechanics - B/Fluids, 49(A), 50-57, doi:10.1016/j.euromechflu.2014.07.008 7. U. Kadri, T.R. Akylas, 2016. On resonant triad interactions of acoustic-gravity waves. J. Fluid Mech., 788, R1(12 pages), doi:10.1017/jfm.2015.721. 8. U. Kadri, 2016. Triad resonance between a surface-gravity wave and two high frequency hydro-acoustic waves. Eur. J. Mech. B/Fluid, 55(1), 157-161, doi:10.1016/j.euromechflu.2015.09.008.

Sustainable environmental nanotechnology using nanoparticle surface modification.

EPA Science Inventory

Reactive nanomaterials used for environmental remediation require surface modification to make them mobile in the subsurface. Nanomaterials released into the environment inadvertently without an engineered surface coating will acquire one (e.g. adsorption of natural organic matt...

Wüstite in the fusion crust of Almahata Sitta sulfide-metal assemblage MS-166: Evidence for oxygen in metallic melts

NASA Astrophysics Data System (ADS)

Horstmann, Marian; Humayun, Munir; Harries, Dennis; Langenhorst, Falko; Chabot, Nancy L.; Bischoff, Addi; Zolensky, Michael E.

2013-05-01

Meteorite fusion crusts form during the passage of a meteoroid through the Earth's atmosphere and are highly oxidized intergrowths as documented by the presence of e.g., oxides. The porous and irregular fusion crust surrounding the Almahata Sitta sulfide-metal assemblage MS-166 was found highly enriched in wüstite (Fe1-xO). Frictional heating of the outer portions of the assemblage caused partial melting of predominantly the Fe-sulfide and minor amounts of the outer Ni-rich portions of the originally zoned metal in MS-166. Along with melting significant amounts of oxygen were incorporated into the molten fusion crust and mainly FeS was oxidized and desulfurized to form wüstite. Considerable amounts of FeS were lost due to ablation, whereas the cores of the large metal grains appear largely unmelted leaving behind metal grains and surrounding wüstite-rich material (matte). Metal grains along with the surrounding matte typically form an often highly porous framework of globules interconnected with the matte. Although textures and chemical composition suggest that melting of Fe,Ni metal occurred only partially (Ni-rich rims), there is a trace elemental imprint of siderophile element partitioning influenced by oxygen in the metallic melt as indicated by the behavior of W and Ga, the two elements significantly affected by oxygen in a metallic melt. It is remarkable that MS-166 survived the atmospheric passage as troilite inclusions in iron meteorites are preferentially destroyed.

Videos Go Viral | Transportation Research | NREL

Science.gov Websites

and in Space NREL research makes lithium-ion batteries safer for earthlings and astronauts . Meet Matt , converters, and chargers-to control the flow of electricity between the battery, the motor, and other

Copper foils with gradient structure in thickness direction and different roughnesses on two surfaces fabricated by double rolling

NASA Astrophysics Data System (ADS)

Wang, Xi-yong; Liu, Xue-feng; Zou, Wen-jiang; Xie, Jian-xin

2013-12-01

Copper foils with gradient structure in thickness direction and different roughnesses on two surfaces were fabricated by double rolling. The two surface morphologies of double-rolled copper foils are quite different, and the surface roughness values are 61 and 1095 nm, respectively. The roughness value of matt surface can meet the requirement for bonding the resin matrix with copper foils used for flexible printed circuit boards, thus may omit traditional roughening treatment; the microstructure of double-rolled copper foils demonstrates an obviously asymmetric gradient feature. From bright surface to matt surface in thickness direction, the average grain size first increases from 2.3 to 7.4 μm and then decreases to 3.6 μm; compared with conventional rolled copper foils, the double-rolled copper foils exhibit a remarkably increased bending fatigue life, and the increased range is about 16.2%.

Recovery Act Milestones

ScienceCinema

Rogers, Matt

2018-05-11

Every 100 days, the Department of Energy is held accountable for a progress report on the American Recovery and Reinvestment Act. Update at 200 days, hosted by Matt Rogers, Senior Advisor to Secretary Steven Chu for Recovery Act Implementation.

76 FR 60754 - Preserving the Open Internet

Federal Register 2010, 2011, 2012, 2013, 2014

2011-09-30

...-201] Preserving the Open Internet AGENCY: Federal Communications Commission. ACTION: Final rule..., 2011, a document establishing rules to preserve the open Internet. Inadvertently the wrong paragraph... alleging violations of the open Internet rules. Federal Communications Commission. Matt Warner, Attorney...

Recovery Act Milestones

DOE Office of Scientific and Technical Information (OSTI.GOV)

Rogers, Matt

2009-01-01

Every 100 days, the Department of Energy is held accountable for a progress report on the American Recovery and Reinvestment Act. Update at 200 days, hosted by Matt Rogers, Senior Advisor to Secretary Steven Chu for Recovery Act Implementation.

78 FR 68019 - Performance Review Board Appointments

Federal Register 2010, 2011, 2012, 2013, 2014

2013-11-13

....; Chasteen, G. Taylor; Christian, Lisa A.; Clanton, Michael W.; Coffee, Richard; Cook, Cheryl L.; Davenport....; Paul, Matt; Pfaeffle, Frederick; Pino, Lisa; Repass, Todd; Robinson, Quinton; Romero, Ramona; Ruiz..., Lisa; Wright, Ann; Young, Benjamin; Young, Mike; Zehren, Christopher J. Marketing and Regulatory...

Emissions from prescribed burning of timber slash piles in Oregon.

EPA Science Inventory

Emissions from burning piles of post-harvest timber slash (Douglas fir) in Grande Ronde, Oregon were sampled using an instrument platform lofted into the plume using a tether-controlled aerostat or balloon. Emissions of carbon monoxide, carbon dioxide, methane, particulate matte...

Zombie physics

NASA Astrophysics Data System (ADS)

Ornes, Stephen

2016-05-01

What makes for a fun student project that provides useful results, a journal publication and a high-profile conference talk? Stephen Ornes describes how Alex Alemi and Matt Bierbaum spiced up their learning by mixing statistical physics with their love of zombie tales.

Respiratory Deposition of Fine and Coarse Particles during Moderate Exercise

EPA Science Inventory

During exercise breathing patterns change by increasing ventilation rate and this has a direct impact on risk to exposure to ambient pollutants. Although the number of people increases participating in more active life styles, specific data for lung deposition of particulate matt...

The mortality cost of particulate matter due to emissions in the Stockholm area : an investigation into harmfulness, sources and the geographical dimension of their impact

DOT National Transportation Integrated Search

2008-12-01

The findings in this report are that there is not an one-to-one correspondence between emissions and costs. The reason for this is that the cost is based on health impacts which in turn are related to population exposure. Combustion particulate matte...

Long-term trends in fire behavior and changes in population at risk

EPA Science Inventory

Long-term trends in fire behavior and changes in population at risk Rappold AG, Peterson GC, US EPA Matt Jolly, USFS Air pollution regulations and technological advances have successfully reduced emissions of air pollutants from many anthropogenic sources in recent decades. Duri...

CHARACTERIZATION OF EMISSIONS FROM BURNING INCENSE

EPA Science Inventory

The primary objective of this study was to improve the characterization of particulate matter emissions from burning incense. Emissions of particulate matter were measured for 23 different types of incense using a cyclone/filter method. Emission rates for PM2.5 (particulate matte...

78 FR 22801 - Request for Comments on Developing a Program To Provide Loan Guarantees to Small- or Medium-Sized...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-04-17

... manufacturing; manufacture an innovative technology product or an integral component of such a product; or, to... use or production of innovative technologies for manufacturing? Dated: April 10, 2013. Matt Erskine.... SUMMARY: The Economic Development Administration (EDA) seeks public comment on, how to design and...

Coal + Biomass → Liquids + Electricity (with CCS)

EPA Science Inventory

In this presentation, Matt Aitken applies the MARKet ALlocation energy system model to evaluate the market potential for a class of technologies that convert coal and biomass to liquid fuels and electricity (CBtLE), paired with carbon capture and storage (CCS). The technology is ...

USING MODELS TO EXTRAPOLATE POPULATION-LEVEL EFFECTS FROM LABORATORY TOXICITY TESTS IN SUPPORT OF POPULATION RISK ASSESSMENTS

EPA Science Inventory

Using models to extrapolate population-level effects from laboratory toxicity tests in support of population risk assessments. Munns, W.R., Jr.*, Anne Kuhn, Matt G. Mitro, and Timothy R. Gleason, U.S. EPA ORD NHEERL, Narragansett, RI, USA. Driven in large part by management goa...

Transformer Specification Language: A System for Generating Analyzers and Its Applications

DTIC Science & Technology

2011-01-01

like to thank present and former colleagues in PL group, Evan Driscoll, Aditya Thakur, Matt Elder, Tushar Sharma , Prathmesh Prabhu, Tycho Andersen, Emma...Robert Cohn, Robert Muth, Harish Patil, Artur Klauser, Geoff Lowney, Steven Wallace, Vijay Janapa Reddi, and Kim Hazelwood. Pin: building customized

Magnetic Resonance Imaging and Volumetric Analysis: Novel Tools to Study Thyroid Hormone Disruption and Its Effect on White Matter Development

EPA Science Inventory

Humans and wildlife are exposed to environmental pollutants that have been shown to interfere with the thyroid hormone system and thus may affect brain development. Our goal was to expose pregnant rats to propylthiouracil (PTU) to measure the effects of a goitrogen on white matte...

SEASONAL MODELING OF THE EXPORT OF POLLUTANTS FROM NORTH AMERICA USING THE MULTI-SCALE AIR QUALITY SIMULATION PLATFORM (MAQSIP)

EPA Science Inventory

Attention in recent years has focused on the trans-boundary transport of ozone and fine particulate matte between the United States and Mexico and Canada and across state boundaries in the United States. In a similar manner, but on a larger spatial scale, the export of pollutant...

77 FR 25596 - Inspection Service Authority; Seizure and Forfeiture

Federal Register 2010, 2011, 2012, 2013, 2014

2012-05-01

... POSTAL SERVICE 39 CFR Part 233 Inspection Service Authority; Seizure and Forfeiture AGENCY: Postal Service TM . ACTION: Final rule. SUMMARY: The Postal Service is revising its regulations with regard to... FURTHER INFORMATION CONTACT: R. Emmett Mattes III, Chief Counsel, U.S. Postal Inspection Service, 202-268...

Educating "The Simpsons": Teaching Queer Representations in Contemporary Visual Media

ERIC Educational Resources Information Center

Padva, Gilad

2008-01-01

This article analyzes queer representation in contemporary visual media and examines how the episode "Homer's Phobia" from Matt Groening's animation series "The Simpsons" can be used to deconstruct hetero- and homo-sexual codes of behavior, socialization, articulation, representation and visibility. The analysis is contextualized in the…

Examination of the Community Multiscale Air Quality (CMAQ) Model Performance over the North American and European Domains

EPA Science Inventory

The CMAQ modeling system has been used to simulate the air quality for North America and Europe for the entire year of 2006 as part of the Air Quality Model Evaluation International Initiative (AQMEII) and the operational model performance of O₃, fine particulate matte...

Qatar: Governance, Security, and U.S. Policy

DTIC Science & Technology

2016-09-07

MENAFATF), a regional financial action task force that coordinates efforts combatting money laundering and terrorism financing. In 2014, the Amir...21 Mark Mazzetti and Matt Apuzzo. “U.S. Relies Heavily on Saudi Money to Support Syrian Rebels.” New York Times, January 23, 2016. http...

Functional optics of glossy buttercup flowers.

PubMed

van der Kooi, Casper J; Elzenga, J Theo M; Dijksterhuis, Jan; Stavenga, Doekele G

2017-02-01

Buttercup ( Ranunculus spp.) flowers are exceptional because they feature a distinct gloss (mirror-like reflection) in addition to their matte-yellow coloration. We investigated the optical properties of yellow petals of several Ranunculus and related species using (micro)spectrophotometry and anatomical methods. The contribution of different petal structures to the overall visual signal was quantified using a recently developed optical model. We show that the coloration of glossy buttercup flowers is due to a rare combination of structural and pigmentary coloration. A very flat, pigment-filled upper epidermis acts as a thin-film reflector yielding the gloss, and additionally serves as a filter for light backscattered by the strongly scattering starch and mesophyll layers, which yields the matte-yellow colour. We discuss the evolution of the gloss and its two likely functions: it provides a strong visual signal to insect pollinators and increases the reflection of sunlight to the centre of the flower in order to heat the reproductive organs. © 2017 The Author(s).

Survival of Staphylococcus aureus exposed to UV radiation on the surface of ceramic tiles coated with TiO2.

PubMed

Szczawiński, J; Tomaszewski, H; Jackowska-Tracz, A; Szczawińska, M E

2011-01-01

The aim of this study was to determine and compare the antimicrobial activity of UV radiation of wavelength 253.7 nm (used in typical germicidal lamps) against Staphylococcus aureus on the surfaces of conventionally produced white ceramic wall tiles (matt and shiny) and the same tiles coated with TiO2 using three different methods: RF diode sputtering, atmospheric pressure chemical vapour deposition (APCVD) and spray pyrolysis deposition (SPD). Results clearly indicate that the bactericidal action of UV radiation is much stronger on the surfaces of tiles coated with TiO2 than on the tiles uncovered. The strongest bactericidal effect of UV radiation was found for film prepared by APCVD. Results of experiments for shiny and matt tiles did not differ statistically. The use of ceramic wall tiles coated with TiO2 films in hospitals, veterinary clinics, laboratories, food processing plants and other places where UV radiation is applied for disinfection should greatly improve the efficiency of this treatment.

75 FR 43809 - Airworthiness Directives; Piper Aircraft, Inc. PA-28, PA-32, PA-34, and PA-44 Series Airplanes

Federal Register 2010, 2011, 2012, 2013, 2014

2010-07-27

... Aircraft Owners and Pilots Association (AOPA), Barry Rogers, Bruce Chien, and Harry Cook commented that... Absorbed by Piper John Witosky, Thomas McIntosh, Claude Dalrymple, Jr., M. Hefter, and George Haffey..., Barry Rogers, Matt Gunsch, Thomas McIntosh, and four other commenters stated that the FAA needs to...

Educating Homeless Children. Hearing before the Subcommittee on Early Childhood, Youth and Families of the Committee on Education and the Workforce. House of Representatives, One Hundred Sixth Congress, Second Session (Phoenix, Arizona, September 5, 2000).

ERIC Educational Resources Information Center

Congress of the U.S., Washington, DC. House Committee on Education and the Workforce.

This hearing before the Subcommittee on Early Childhood, Youth and Families of the Committee on Education and the Workforce, House of Representatives, which was held in Phoenix, Arizona, focused on ensuring equal educational opportunities for homeless children. After an opening statement by the Honorable Matt Solomon, Subcommittee on Early…

40 CFR 61.174 - Test methods and procedures.

Code of Federal Regulations, 2011 CFR

2011-07-01

... Arsenic Emissions From Primary Copper Smelters § 61.174 Test methods and procedures. (a) To determine... converter arsenic charging rate as follows: (1) Collect daily grab samples of copper matte and any lead... determine the weight percent of inorganic arsenic contained in each sample. (3) Calculate the converter...

Genotyping-by-sequencing of waxy and glossy near-isogenic broccoli lines

USDA-ARS?s Scientific Manuscript database

Wild-type Brassica oleracea L. have matte blue-green leaves caused by an interaction between leaf pigmentation and a waxy bloom coating the surface. Glossy mutants have reduced and/or altered epicuticular wax giving the leaves a shiny green appearance and have been identified in most B. oleracea cro...

Material for "Substrate temperature controls molecular orientation in two-component vapor- deposited glasses." Soft Matter, 2016, 12, 3265.

DOE Data Explorer

Jiang, Jing [Nanjing University; Walters, Diane M [University of Wisconsin-Madison; Zhou, Dongshan [Nanjing University; Ediger, Mark D [University of Wisconsin-Madison

2016-08-18

Data set for work presented in Jiang, J.; Walters, D. M.; Zhou, D.; Ediger, M. D. “Substrate Temperature Controls Molecular Orientation in Two -Component Vapor-deposited Glasses.” Soft Matt. 2016, 12, 3265. Includes all data presented in the manuscript as well as example raw data and analysis.

Chemsheet as a Simulation Platform for Pyrometallurgical Processes

NASA Astrophysics Data System (ADS)

Penttilä, Karri; Salminen, Justin; Tripathi, Nagendra; Koukkari, Pertti

ChemSheet is a thermodynamic multi-phase multi-component simulation software, which is used as an Add-in in Microsoft Excel. In ChemSheet, the unique Constrained Gibbs free energy method can be used to include dynamic constraints and reaction rates of kinetically slow reactions, yet retaining full consistency of the multiphase thermodynamic model. With appropriate data, ChemSheet models can be used to simulate reactors and processes in all fields of thermochemistry. The presentation will cover off-line modeling of Cu-flash smelters and advanced thermochemical simulation coupled with on-line process control of Cu-Ni smelting. The presentation will describe an off-line model of Cu-smelter based on critically assessed properties of the Al-Ca-Cu-Fe-O-S-Si -system (slag, matte and liquid metal) by using the quasichemical model. A four-stage reactor model (shaft, settler, uptake and bath) is used for optimizing process parameters and feed particle distribution. As a second example, an advanced thermochemical model of a Ni-Cu sulphide smelting plant will be given. The on-line model covers the operation of treating Ni-Cu-S concentrate via roasters, electric furnace and converters, producing a high grade Bessemer matte product for further refining. The model integrates the thermochemistry of the roasters and electric furnace, and predicts important process parameters such as degree of sulphur elimination in the fluid-bed roasters, matte grade, iron metallization, slag losses and the iron to silica ratio in the electric furnace slag. Both models can be used to assist process engineers and operators in calculating the addition rates of coke, flux and air for different feed scenarios.

Marine Technology for Teachers and Students: A Multi-modal Approach to Integrate Technology and Ocean Sciences Instruction

NASA Astrophysics Data System (ADS)

Gingras, A.; Knowlton, C. W.; Scowcroft, G. A.; Babb, I.; Coleman, D.; Morin, H.

2016-02-01

The Marine Technology for Teachers and Students (MaTTS) Project implements a year-long continuum of activities beginning with educators reading and reporting on peer-reviewed publications, followed by face-to-face, hands-on weekend workshops and virtual professional development activities. Teams of teacher and student leaders then participate in an intensive, residential Summer Institute (SI) that emphasizes hands-on building of marine related technologies and exposure to career pathways through direct interactions with ocean scientists and engineers. During the school year, teachers integrate ocean science technology and data into their classrooms and participate, along with colleagues and students from their schools, in science cafes and webinars. Student leaders transfer knowledge gained by engaging their district's middle school students in ocean science activities and technologies by serving as hosts for live broadcasts that connect classrooms with ocean scientists and engineers though the Inner Space Center, a national ocean science telecommunications hub. Communication technologies bridge formal and informal learning environments, allowing MaTTS participants to interact with their fellow cohort members, scientists, and engineers both during and outside of school. Evaluation results indicate that for teachers both the weekend workshops and SI were most effective in preparing them to integrate ocean science and technology in STEM curricula and increase their ocean science content knowledge and leadership characteristics. For students the SI and the middle school interactions supported gains in knowledge, awareness, leadership skills and interest in ocean sciences and technologies, and related STEM careers. In particular, the connections made by working directly with scientists have positively impacted both student and teacher leaders. This presentation will provide an overview of the MaTTS model and early evaluation results.

DEVELOPMENT OF THE METAL FINISHING FACILITY RISK SCREENING TOOL

EPA Science Inventory

Enhancement of the US Environmental Protection Agency's
Metal Finishing Facility Risk Screening Tool (MFFRST)

William M. Barrett Jr, Ph.D., P.E. , P.E.; Paul Harten, Ph.D.1, Matt Lorber , Charles Peck , and Steve Schwartz, P.E., Q.E.P.3

Recently, the US Environ...

Intellectualist Aristotelian Character Education: An Outline and Assessment

ERIC Educational Resources Information Center

Ferkany, Matt; Creed, Benjamin

2014-01-01

Since its resurgence in the 1990s, character education has been subject to a bevy of common criticisms, including that it is didactic and crudely behaviorist; premised on a faulty trait psychology; victim-blaming; culturally imperialist, racist, religious, or ideologically conservative; and many other horrible things besides. Matt Ferkany and…

Research Staff | Photovoltaic Research | NREL

Science.gov Websites

-7511 Name Position Email Phone Al-Jassim, Mowafak Group Research Manager III-Materials Science , Teresa Acting Group Manager Teresa.Barnes@nrel.gov 303-384-6682 Beard, Matt Researcher VI-Chemistry @nrel.gov 303-384-7611 Blackburn, Jeffrey Group Research Manager III-Materials Science Jeffrey.Blackburn

News and Views: A VISTA of the Orion Nebula; Grote Reber Award; Leverhulme Prize; GNSS workshop; Farming in space; Space messages

NASA Astrophysics Data System (ADS)

2010-04-01

The recipient of the 2010 Grote Reber Award is Dr Alan Rogers, a Research Affiliate at the Massachusetts Institute of Technology Haystack Observatory. Matt King, a Reader in Polar Geodesy in the School of Civil Engineering and Geosciences at the University of Newcastle, was awarded a Philip Leverhulme Prize in 2009.

ARC-2011-ACD11-0012-012

NASA Image and Video Library

2011-01-26

Technology Partnerships awards: Federal Laboratory Consortium Far West Region Award for Outstanding Technology Development for Multi-Aircraft Control System. In particular order are Connie Brasil, Todd Callantine, Al Globus, Jeff Homola, Rich Jacoby, George Lawton, Paul Lee, Matt Mainini, Joey Mercer, Ev Palmer, Tom Prevot, Nancy Smith, Easter Wang, James Wong.

A Portable Burn Pan for the Disposal of Excess Propellants

DTIC Science & Technology

2015-11-01

National Guard Bureau; John Hunt , formerly at Camp Grayling; Jo Anderson, formerly at Ft. Indiantown Gap; and Steve Thurmond, formerly at US Army Alaska...Finally at CRREL, Marianne Walsh, Charlie Smith, Tommie Hall, Matt Bigl, Chris Donnelly, and Jordan Hodge all played major roles in the success of the burn pan.

78 FR 22024 - Request To Release Airport Property at the Oakley Municipal Airport (OEL), Oakley, Kansas

Federal Register 2010, 2011, 2012, 2013, 2014

2013-04-12

... application may be mailed or delivered to the FAA at the following address: Lynn D. Martin, Airports... property be released for sale to Matt Mildenberger of Mitten's, Inc. for a restaurant. On March 5, 2013... application, notice and other documents determined by the FAA to be related to the application in person at...

Choosing Advocacy. Occasional Paper Series 21

ERIC Educational Resources Information Center

Matt, Megan; Morrison, Danielle

2008-01-01

Two articles comprise this publication. In "Beyond the Story-Book Ending: Literature for Young Children About Parental Estrangement and Loss," Megan Matt analyzes over 30 books for young children on the topics of abandonment, estrangement, divorce, and foster care. She observes that this loss might appear as an event within the story or…

77 FR 71807 - Changes in Flood Hazard Determinations

Federal Register 2010, 2011, 2012, 2013, 2014

2012-12-04

... 170931 areas of McLean Matt Sorenson, Building and Zoning team.com/starr/LOMR/ County (11-05- Chairman... flood insurance premium rates for new buildings and the contents of those buildings. For rating purposes.... Boulevard, Boise, ID team.com/starr/LOMR/ Biester, Mayor, 83702. Pages/RegionX.aspx. City of Boise, 150...

Making the Case for Primary Care and Mandated Suicide Prevention Education

ERIC Educational Resources Information Center

Stuber, Jennifer; Quinnett, Paul

2013-01-01

During its 2012 legislative session, Washington State passed ESHB 2366, otherwise known as the Matt Adler Suicide Assessment, Treatment, and Management Act of 2012. ESHB 2366 is a significant legislative achievement as it is the first law in the country to require certain health professionals to obtain continuing education in the assessment,…

The History Research Project

ERIC Educational Resources Information Center

Estes, Matt; Brady, Ann

2005-01-01

Matt Estes, a social studies teacher, mentions the main instructional goals for his students like understanding the importance of proper citation and attribution presenting the Machiavelli project that deals with the skills he wants his students to develop and the course material that must be covered. In addition, Ann Brady, a library media…

Graphing Inequalities, Connecting Meaning

ERIC Educational Resources Information Center

Switzer, J. Matt

2014-01-01

Students often have difficulty with graphing inequalities (see Filloy, Rojano, and Rubio 2002; Drijvers 2002), and J. Matt Switzer's students were no exception. Although students can produce graphs for simple inequalities, they often struggle when the format of the inequality is unfamiliar. Even when producing a correct graph of an…

Hey Matt! There's a "Reason" We Write Like Every Day!

ERIC Educational Resources Information Center

Toussant, Molly

2007-01-01

Fifth grade teacher Molly Toussant realized with chagrin that she habitually mouthed her precepts about teaching writing in the same rote way she had recited the Apostles' Creed in Sunday school, and that her students had no idea why they had to write "like every day." So she wrote this explication in which she shows, with many examples, how her…

Metal mobilization from metallurgical wastes by soil organic acids.

PubMed

Potysz, Anna; Grybos, Malgorzata; Kierczak, Jakub; Guibaud, Gilles; Fondaneche, Patrice; Lens, Piet N L; van Hullebusch, Eric D

2017-07-01

Three types of Cu-slags differing in chemical and mineralogical composition (historical, shaft furnace, and granulated slags) and a matte from a lead recovery process were studied with respect to their susceptibility to release Cu, Zn and Pb upon exposure to organic acids commonly encountered in soil environments. Leaching experiments (24-960 h) were conducted with: i) humic acid (20 mg/L) at pH t 0  = 4.4, ii) fulvic acid (20 mg/L) at pH t 0  = 4.4, iii) an artificial root exudates (ARE) (17.4 g/L) solution at pH t 0  = 4.4, iv) ARE solution at pH t 0  = 2.9 and v) ultrapure water (pH t 0  = 5.6). The results demonstrated that the ARE contribute the most to the mobilization of metals from all the wastes analyzed, regardless of the initial pH of the solution. For example, up to 14%, 30%, 24% and 5% of Cu is released within 960 h from historical, shaft furnace, granulated slags and lead matte, respectively, when exposed to the artificial root exudates solution (pH 2.9). Humic and fulvic acids were found to have a higher impact on granulated and shaft furnace slags as compared to the ultrapure water control and increased the release of metals by a factor up to 37.5 (Pb) and 20.5 (Cu) for granulated and shaft furnace slags, respectively. Humic and fulvic acids amplified the mobilization of metals by a maximal factor of 13.6 (Pb) and 12.1 (Pb) for historical slag and lead matte, respectively. The studied organic compounds contributed to different release rates of metallic contaminants from individual metallurgical wastes under the conditions tested. Copyright © 2017 Elsevier Ltd. All rights reserved.

KULR Technology Exclusively Licenses Award-Winning Battery Internal Short

Science.gov Websites

improved before batteries hit store shelves. llustration of a battery cell pack with one cell overheating . One such failure is thermal runaway-when extreme heat from the failure of one battery cell spreads to safety measures for battery systems," said Vehicle Electrification Group Manager Matt Keyser, who

FRC Compression Heating Experiment (FRCHX) at AFRL

DTIC Science & Technology

2007-06-01

Air Force Research Laboratory ( AFRL ) and Los Alamos National Laboratory (LANL) have been... Air Force Research Laboratory , Directed Energy Directorate, 3550 Aberdeen Avenue SE Kirtland AFB, NM 87117-5776 USA 8. PERFORMING ORGANIZATION REPORT...Matt Domonkos, Don Gale, Bernard Martinez, Jerry Parker, Dale Ralph, Ed Ruden, and Wayne Sommars Air Force Research Laboratory , Directed

Ex-King of Campus Gossip Turns to Saving Web Reputations

ERIC Educational Resources Information Center

Rice, Alexandra

2012-01-01

Matt Ivester became notorious on campuses across the country in 2007 for publishing gossip--not about celebrities but about students--on Juicy-Campus, the Web site he created. The site was blocked by some colleges, banned by several student governments, and threatened with legal action by several students who claimed that defaming comments on the…

Microfilm Viewer Experiments. Final Report.

ERIC Educational Resources Information Center

Reintjes, J. F.; And Others

Two new designs for microfilm viewers are described. Both viewers are front projection viewers utilizing matte surface display screens. One viewer with an adjustable horizontal screen has a normal magnification rate and is mounted on a desk top. The other viewer has a high (4x) magnification rate in a mini-theater configuration with remote…

Is It Possible for Teachers to Take Students beyond a Rudimentary Introduction to an Activity?

ERIC Educational Resources Information Center

Journal of Physical Education, Recreation & Dance, 2013

2013-01-01

This brief article presents student and professor responses to the question: Is it possible for teachers to take students beyond a rudimentary introduction to an activity? [Responses to this question were provided by Kevin Reilly, Terra Marjonen, Scott A. G. M. Crawford, Jason S. Whitworth, Brianne Mahoney, Erin Sereduk, Sam Thielen, Matt Lassen,…

Basic Media in Education.

ERIC Educational Resources Information Center

Harrell, John

Intended as a guide to the use of different media for use in the classroom, this document demonstrates alternative approaches that may be taken to depicting and communicating images and concepts to others. Some basic tools and materials--including a ruler, matte knife, rubber cement, stapler, felt-tip pens, paint brushes, and lettering pens--are…

Photography, Motion Picture Film Cores and Spools, Performances, and Other Technical Information

DTIC Science & Technology

2000-01-01

process was an outgrowth of the Fred Waller Flexible Gunnery Trainer25 used to train aerial gunners to hit fast-moving air-borne targets. The realism ...34Travelling matte photography and the blue-screen system," published serially, Am. Cinemat , 44: 590-606, Oct. 1963; 45: 34-45, Jan. 1964; 208-210, 226-227

40 CFR 421.75 - Pretreatment standards for existing sources.

Code of Federal Regulations, 2010 CFR

2010-07-01

... produced Lead .000 .000 Zinc .000 .000 (c) Subpart G—Blast Furnace Slag Granulation. PSES Pollutant or... blast furance lead bullion produced Lead .000 .000 Zinc .000 .000 (d) Subpart G—Dross Reverberatory Slag... (pounds per billion pounds) of slag, speiss, or matte granulated Lead 1,612.000 748.400 Zinc 5,872.000 2...

40 CFR 421.73 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

Code of Federal Regulations, 2010 CFR

2010-07-01

... produced Lead .000 .000 Zinc .000 .000 (d) Subpart G—Dross Reverberatory Slag Granulation. BAT Effluent... per billion pounds) of slag, speiss, or matte granulated Lead 1,612.000 748.400 Zinc 5,872.000 2,418... produced Lead .000 .000 Zinc .000 .000 (g) Subpart G—Hard Lead Refining Slag Granulation. BAT Effluent...

40 CFR 421.75 - Pretreatment standards for existing sources.

Code of Federal Regulations, 2011 CFR

2011-07-01

... produced Lead .000 .000 Zinc .000 .000 (c) Subpart G—Blast Furnace Slag Granulation. PSES Pollutant or... blast furance lead bullion produced Lead .000 .000 Zinc .000 .000 (d) Subpart G—Dross Reverberatory Slag... (pounds per billion pounds) of slag, speiss, or matte granulated Lead 1,612.000 748.400 Zinc 5,872.000 2...

40 CFR 421.73 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

Code of Federal Regulations, 2011 CFR

2011-07-01

... produced Lead .000 .000 Zinc .000 .000 (d) Subpart G—Dross Reverberatory Slag Granulation. BAT Effluent... per billion pounds) of slag, speiss, or matte granulated Lead 1,612.000 748.400 Zinc 5,872.000 2,418... produced Lead .000 .000 Zinc .000 .000 (g) Subpart G—Hard Lead Refining Slag Granulation. BAT Effluent...

High-temperature phase relations and thermodynamics in the iron-lead-sulfur system

NASA Astrophysics Data System (ADS)

Eric, R. Hurman; Ozok, Hakan

1994-01-01

The PbS activities in FeS-PbS liquid mattes were obtained at 1100 °C and 1200 °C by the dew-point method. Negative deviations were observed, and the liquid-matte solutions were modeled by the Krupkowski formalism. The liquid boundaries of the FeS-PbS phase diagram were derived from the model equations yielding a eutectic temperature of 842 °C at X Pbs = 0.46. A phase diagram of the pseudobinary FeS-PbS was also verified experimentally by quenching samples equilibrated in evacuated and sealed silica capsules. No terminal solid solution ranges could be found. Within the Fe-Pb-S ternary system, the boundaries of the immiscibility region together with the tie-line distributions were established at 1200 °C. Activities of Pb were measured by the dew-point technique along the metal-rich boundary of the miscibility gap. Activities of Fe, Pb, and S, along the miscibility gap were also calculated by utilizing the bounding binary thermodynamics, phase equilibria, and tie-lines.

Comparisons of carcinogenicities of nickel compounds in rats

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sunderman, F.W. Jr.; Maenza, R.M.

This study demonstrates marked differences in the incidences of sarcomas in Fischer rats within 2 years after a single im injection of 4 insoluble nickel-containing powders amorphous nickel monosulfide (NiS), nickel subsulfide (..cap alpha..Ni/sub 3/S/sub 2/), partially converted nickel-iron sulfide matte, and metallic nickel. The powders (<2 ..mu..m median particle diameters) were administered in penicillin suspension, and each powder was tested at 2 dosages. Whereas ..cap alpha..Ni/sub 3/S/sub 2/ was highly carcinogenic, amorphous NiS did not induce any tumors. The carcinogenic potency of partially converted nickel-iron sulfide matte was less than ..cap alpha..Ni/sub 3/S/sub 2/ but greater than Ni powder.more » No sarcomas occurred at the injection site in two groups of control rats that received im injections of penicillin or Fe powder. The observed differences in carcinogenic potencies of ..cap alpha..Ni/sub 3/S/sub 2/ and amorphous NiS may provide an experimental approach to elucidate the molecular mechanisms of nickel carcinogenesis.« less

Spring Research Festival and NICBR Collaboration Winners Announced | Poster

Cancer.gov

By Carolynne Keenan, Contributing Writer, and Ashley DeVine, Staff Writer The winners of the 2014 Spring Research Festival (SRF), held May 7 and 8, were recognized on July 2, and included 20 NCI at Frederick researchers: Matthew Anderson, Victor Ayala, Matt Bess, Cristina Bergamaschi, Charlotte Choi, Rami Doueiri, Laura Guasch Pamies, Diana Haines, Saadia Iftikhar, Maria

Participation Cartography: Blurring the Boundaries of Space, Autobiography, and Memory by Means of Performance

ERIC Educational Resources Information Center

Sotelo-Castro, Luis Carlos

2010-01-01

In this article, I focus on the empowering potential of a participatory practice that frames walking as integral to a performative, self-mapping, and aesthetic process. By discussing my experience as a participant in "Ere Be Dragons" (2007), a work by the artists collective Active Ingredient (Rachel Jacobs and Matt Watkins), I set out some new…

Alaska State Legislature

Science.gov Websites

District: 26 Phone: 907-465-4931 Toll-Free: 800-870-4931 Email Me image description Mike Chenault City : Nikiski Party: Republican District: 29 Phone: 907-465-3779 Toll-Free: 800-469-3779 Email Me image description Matt Claman City: Anchorage Party: Democrat District: 21 Phone: 907-465-4919 Toll-Free: 888-465

ACHP | Advisory Council on Historic Preservation Staff Directory

Science.gov Websites

general counsel kfanizzo@achp.gov 202-517-0193 Office of Administration Ismail D. Ahmed, senior accountant wdancingfeather@achp.gov 202-517-0195 Ira Matt, Senior Policy Analyst imatt@achp.gov 202-517-1481 Office of specialist lrichmond@achp.gov 202-517-1484 Shayla Shrieves, senior writer-editor sshrieves@achp.gov 202-517

Academies and How to Beat Them: "Our Pits, Our Jobs, but Not Our Schools"

ERIC Educational Resources Information Center

Bailey, Matt

2005-01-01

The author of this paper, Matt Bailey, has taught for six years at Northcliffe School, Doncaster, where he is the NUT representative, and Head of Science. A member of the NUT's national working-party on academies, he outlines here the first successful campaign waged by a local community to thwart the imposition of a privately-run Academy in place…

Making Connections through the Lens of Blue Man Group

ERIC Educational Resources Information Center

Stephens, Pam

2005-01-01

The Blue Man Group began in 1988 when friends Matt Goldman, Phil Stanton, and Chris Wink all living in New York--voiced their increasing disgruntlement and boredom with urban life. With a gut feeling that creativity and a tribal-like community could prosper in their metropolitan environment, the friends decided to confront the issues rather than…

Still Teaching for America

ERIC Educational Resources Information Center

Kronholz, June

2013-01-01

In this article, June Kronholz talks to co-chief executives of Teach For America (TFA), Elisa Villanueva Beard and Matt Kramer about how TFA has managed to keep its forward momentum for almost 24 years. Four primary reasons are discussed: (1) Common Vision, Regional Innovation; (2) Data-Driven Improvement; (3) Global Reach; and (4) Stoking the…

Endeavour Lands at LAX

NASA Image and Video Library

2012-09-21

The space shuttle Endeavour, atop the Shuttle Carrier Aircraft, or SCA, lands at Los Angeles International Airport on Tuesday, Sept. 21, 2012 in Los Angeles where it will be placed on public display at the California Science Center. Today's flight marks the final scheduled ferry flight of the Space Shuttle Program. Photo Credit: (NASA/Matt Hedges)

Looking through the Keyhole at Birkenhead from 1900 to 1950 with Year 7: Negotiating Meanings and Bacon Bones

ERIC Educational Resources Information Center

Bird, Michael; Jones, Matt

2017-01-01

Matt Jones wanted to harness the power of local history to help his students understand the profound social changes experienced across Britain in the first half of the twentieth century. While he hoped that the personal stories of six families in Birkenhead would help to humanise abstract concepts such as the Great Depression, he was taken aback…

Good & Plenty: It Used to Be Hard to Find Good Graphic Novels for the K-4 Crowd. My, How Times Have Changed

ERIC Educational Resources Information Center

Gutierrez, Peter

2009-01-01

Just a couple of years ago, it was tough to find good graphic novels for the K-4 crowd. Sure, there were some standout selections, such as Andy Runton's "Owly", Jimmy Gownley's "Amelia Rules!", and Jennifer and Matt Holm's "Babymouse", but they were lonely exceptions in a barren landscape. Things quickly changed when publishers realized that the…

NREL Blows Up Batteries to Make the World Safer | News | NREL

Science.gov Websites

lithium-ion batteries safer for earthlings and astronauts is something NREL excels at. In this video . Matt and his team study battery failure using innovative technologies, such as the award-winning Battery Internal Short Circuit (ISC) Device that can precisely identify weak spots in battery cells. This

Protecting the Force: Lessons from Fort Hood

DTIC Science & Technology

2010-01-01

learned and best practices. The Services appear to have insufficient data to assess traumatic stress and healthcare provider burnout , critical elements...Crisis Communication: Workplace and School Violence, Stockholm Syndrome , and Abnormal Psychology,” Annals of the American Psychotherapy Association...88-106; Matt DeLisi, Andy Hochstetler, Aaron M. Scherer, Aaron Purhmann, and Mark T. Berg, “The Starkweather Syndrome : Exploring Criminal History

Recommended Processes and Best Practices for Nondestructive Inspection (NDI) of Safety-Of-Flight Structures

DTIC Science & Technology

2008-10-01

Brausch, Lawrence Butkus, David Campbell, Tommy Mullis, and Michael Paulk Materials Integrity Branch System Support Division OCTOBER...PROGRAM ELEMENT NUMBER N/A 6. AUTHOR(S) John Brausch and Dr. Lawrence Butkus (AFRL/RXSA) David Campbell (76 MXSS/MXDEBB) Tommy Mullis (WRALC... David Forsyth, Texas Research Institute Austin, Inc. Dr. Matt Golis, Advanced Quality Concepts Ward Rummel, D&W Enterprises, LTD. 1 1.0

Designing End-of-Year Exams: Trials and Tribulations

ERIC Educational Resources Information Center

Stanford, Matt

2017-01-01

Since the decline of the National Curriculum Level Descriptions, schools in England have been asked to design their own forms of assessment at Key Stage 3. This had led to a great deal of creativity, but also a number of challenges. In this article Matt Stanford reflects on his department's attempts to develop a rigorous end-of year assessment. In…

Optoelectric Technology Roadmap: Conclusions and Recommendations

DTIC Science & Technology

1994-05-01

Haitz Hughes Adrian Popa Robert Buckley IBM Maurizio Arienzo John Crow NYNEX Robert Lawrence Motorola Ron Nelson 3M Charles T. Walker OPTOELECTRONIC...Bellcore (1) Industrial Mark Chandler, Hewlett-Packard Military/Aerospace Richard Lind, Hughes Luis Figueroa , Boeing Computer John Crow, IBM...Bellcore William Womack AT&T Matt Goodman Bellcore Dwight Duston BMDO Paul Shumate Bellcore Luis Figueroa Boeing Richard Jones Broadband Technologies

Hand-to-Hand Combat and the Use of Combatives Skills: An Analysis of United States Army Post Combat Surveys from 2004-2008

DTIC Science & Technology

2014-11-19

to develop virtual environments for practicing stress management skills with military personnel prior to deployment. Cyberpsychology , Behavior , and... Social Networking , 13, 83-94. doi: 10.1089=cyber.2009.0336 Bowen, G. A. (2009). Document analysis as a qualitative research method. Qualitative... Behavioral Science and Leadership, was very helpful in providing insight and advice as the project progressed. Matt Larsen, US Army (Retired), former

Parenting the Gifted: The Ongoing Riddle of Which Nurture is Best for What Nature: Parents Promoting Gifted Potential

ERIC Educational Resources Information Center

Haensly, Patricia

2004-01-01

Matt Ridley, an Oxford-trained zoologist and science writer whose latest book is "Nature via Nurture: Genes, Experience, and What Makes Us Human" (2003a), wrote such an impressively clear and fascinating piece on "What Makes You Who You Are" that the author decided to use it to introduce the continuing pursuit of "What do I do to best promote…

Wide Area Recovery and Resiliency Program (WARRP) Knowledge Enhancement Working Group: Multi-Agency Coordination After Action Report

DTIC Science & Technology

2012-02-23

Kaski Charles Denver Office of Emergency Management Kellar Scott Arapahoe County/NCR Coordinator Krebs Kathleen Clear Creek County Krugman Jim USDA...Mower John Cubic Applications, Inc. Mueller Matt Denver Office of Emergency Management Ridley Teri WARRP Rubenstein Mike Jefferson County...Office of Emergency Management: Scott Field Denver Office of Emergency Management: Pat Williams Douglas County: Fran Santagata Douglas County: Steve

Propagation of acoustic-gravity waves in arctic zones with elastic ice-sheets

NASA Astrophysics Data System (ADS)

Kadri, Usama; Abdolali, Ali; Kirby, James T.

2017-04-01

We present an analytical solution of the boundary value problem of propagating acoustic-gravity waves generated in the ocean by earthquakes or ice-quakes in arctic zones. At the surface, we assume elastic ice-sheets of a variable thickness, and show that the propagating acoustic-gravity modes have different mode shape than originally derived by Ref. [1] for a rigid ice-sheet settings. Computationally, we couple the ice-sheet problem with the free surface model by Ref. [2] representing shrinking ice blocks in realistic sea state, where the randomly oriented ice-sheets cause inter modal transition at the edges and multidirectional reflections. We then derive a depth-integrated equation valid for spatially slowly varying thickness of ice-sheet and water depth. Surprisingly, and unlike the free-surface setting, here it is found that the higher acoustic-gravity modes exhibit a larger contribution. These modes travel at the speed of sound in water carrying information on their source, e.g. ice-sheet motion or submarine earthquake, providing various implications for ocean monitoring and detection of quakes. In addition, we found that the propagating acoustic-gravity modes can result in orbital displacements of fluid parcels sufficiently high that may contribute to deep ocean currents and circulation, as postulated by Refs. [1, 3]. References [1] U. Kadri, 2016. Generation of Hydroacoustic Waves by an Oscillating Ice Block in Arctic Zones. Advances in Acoustics and Vibration, 2016, Article ID 8076108, 7 pages http://dx.doi.org/10.1155/2016/8076108 [2] A. Abdolali, J. T. Kirby and G. Bellotti, 2015, Depth-integrated equation for hydro-acoustic waves with bottom damping, J. Fluid Mech., 766, R1 doi:10.1017/jfm.2015.37 [3] U. Kadri, 2014. Deep ocean water transportation by acoustic?gravity waves. J. Geophys. Res. Oceans, 119, doi:10.1002/ 2014JC010234

National Commission on the Structure of the Air Force: Report to the President and Congress of the United States

DTIC Science & Technology

2014-01-30

August 20, 2013, with public hearing in Oklahoma City Alpena CRTC, Mich., September 13, 2013 Selfridge ANGB, Mich., September 14, 2013, with public...Colonel Bryan Teff (ANG), Commander, Alpena Combat Readiness Training Center, Michigan Colonel Sean Southworth (ANG), Commander, 217th Air Operations...Group, W.K. Kellogg ANGB, Michigan Lieutenant Colonel Matt Trumble (ANG), Director of Operations, Grayling Air Gunnery Range, Alpena Combat Readiness

Processing precious metals in a top-blown rotary converter

NASA Astrophysics Data System (ADS)

Whellock, John G.; Matousek, Jan W.

1990-09-01

Copper-nickel/platinum-palladium flotation concentrates produced by the Stillwater Mining Company were smelted and refined in an integrated pilot plant consisting of a submerged-arc electric furnace and top-blown rotary converter. The conversion of high-iron electric furnace mattes was achieved with apparent oxygen efficiencies in excess of 100 percent. Platinum and palladium recoveries averaged 99 percent, and copper and nickel recoveries were 94 percent.

Seed Planting in Veggie Pillows

NASA Image and Video Library

2017-08-08

Matt Romeyn, a NASA biologist, secures seeds in plant pillows for the Veggie plant growth system inside a laboratory in the Space Station Processing Facility at NASA's Kennedy Space Center in Florida. The plant pillows, containing Outredgeous lettuce, Mizuna Mustard and Waldmann's green lettuce seeds, were packed for delivery to Veggie on SpaceX's 12th commercial resupply services mission to the International Space Station.

Advances in Protective Coatings and Their Application to Ageing Aircraft

DTIC Science & Technology

2000-04-01

Aerospace Material Specification Selectively (1997) Strippable Acrylic Finishing Schemes - Matt and Glossy - 23. K.R. Baldwin and C.J.E. Smith, Repair...corrosion through design, the selection of military and civil aircraft during the last thirty years. Research materials that are resistant to corrosion and...compliant coatings. initiation of corrosion. This paper first examines the general principles involved in 2.2 Materials selection the corrosion

Overseas Basing of U.S. Military Forces: An Assessment of Relative Costs and Strategic Benefits

DTIC Science & Technology

2013-01-01

LCDR Mike Williams, CDR Matt Konopka, Gregg Nishimura, MG James Boozer, COL Andrew Heppelmann, LTC Robert Murphy, MAJ Garrett Trott , MAJ Thomas...2012 Defense Strategic Guidance calls for evolution and innovation in overseas posture. It sets forth significant guidance for posture planning as...also remains important for sharing the costs and responsibilities of global leadership.… Whenever possible, we will develop innovative , low-cost, and

Orientation Behavior Using Registered Topographic Maps

DTIC Science & Technology

2006-01-01

integrated with the ability to reach for visual targets ( Marjanovic , Scassel- lati, & Williamson 1996). The same is true for social skills where the robot...behavior with reaching and manipula- tion tasks currently under parallel development by other members of the group ( Marjanovic et al. 1996). 8 Conclusions...in alphabet- ical order): Mike Binnard, Rod Brooks, Robert Irie, Eleni Kapogannis, Matt Marjanovic , Yoky Matsuoka, Brian Scasselatti, Nick Shectman

Why the United States Must Adopt Lethal Autonomous Weapon Systems

DTIC Science & Technology

2017-05-25

2017. http://www.designboom.com/ technology /designboom-tech-predictions-robotics-12-26- 2016/. Egan, Matt. "Robots Write Thousands Of News Stories A...views on the morality of artificial intelligence (AI) and robotics technology . Eastern culture sees artificial intelligence as an economic savior...Army, 37 pages. The East and West have differing views on the morality of artificial intelligence (AI) and robotics technology . Eastern culture

Female Engagement Teams: Making the Case for Institutionalization Based on U.S. Security Objectives in Africa

DTIC Science & Technology

2013-05-23

politically when men and women are afforded equitable access to health, education, economic, and political resources.8 However, a review of countries...theory; there would need to be an equal improvement in how the local community understood what the school and education more broadly represented for the...in its World Development Report 2012: Gender Equality and Development: 18LTG Michael T. Flynn, Capt Matt Pottinger, and Paul D. Batchelor, Fixing

Non-chromate Passivation for LHE ZnNi

DTIC Science & Technology

2017-03-01

control of coatings and processes. Development of an alternative methodology that is simple, repeatable, non -destructive, and capable of scanning across...FINAL REPORT Non -chromate Passivation for LHE ZnNi SERDP Project WP-2527 JANUARY 2017 Matt O’Keefe Missouri S&T...valid OMB control number. PLEASE DO NOT RETURN YOUR FORM TO THE ABOVE ADDRESS. 1. REPORT DATE (DD-MM-YYYY) 2. REPORT TYPE 3. DATES COVERED (From

Improving Big Data Visual Analytics with Interactive Virtual Reality

DTIC Science & Technology

2015-05-22

gain a better understanding of data include scalable zooms, dynamic filtering, and anno - tation. Below, we describe some tasks that can be performed...pages 609–614. IEEE, 2014. [13] Matt R Fetterman, Zachary J Weber, Robert Freking, Alessio Volpe, D Scott, et al. Luminocity: a 3d printed, illuminated...Institute for Business Valueexecutive report, IBM Institute for Business Value, 2012. [24] James J Thomas. Illuminating the path:[the research and

An Internet-style Approach to Managing Wireless Link Errors

DTIC Science & Technology

2002-05-01

implementation I used. Jamshid Mahdavi and Matt Mathis, then at the Pittsburgh Super- computer Center, and Vern Paxson of the Lawrence Berkeley National...Exposition. IEEE CS Press, 2002. [19] P. Bhagwat, P. Bhattacharya, A. Krishna , and S. Tripathi. Enhancing throughput over wireless LANs using channel...performance over wireless networks at the link layer. ACM Mobile Networks and Applications, 5(1):57– 71, March 2000. [97] Vern Paxson and Mark Allman

Surface-Streamline Flow Visualization

NASA Technical Reports Server (NTRS)

Langston, L.; Boyle, M.

1985-01-01

Matrix of ink dots covers matte surface of polyester drafting film. Film placed against wind-tunnel wall. Layer of methyl salicylate (oil of wintergreen) sprayed over dotted area. Ink dot streaklines show several characteristics of flow, including primary saddle point of separations, primary horseshoe vortex and smaller vortex at cylinder/ endwall junction. Surface streamline flow visualization technique suitable for use in low-speed windtunnels or other low-speed gas flows.

Operation Unified Response: A Case Study of the Military’s Role in Foreign Disaster Relief Operations

DTIC Science & Technology

2011-05-05

disease danger was exacerbated by the introduction of cholera into post-earthquake Haiti, likely by Nepalese United Nation aiel workers, which caused... Mexico ," MSNBC; 5 September 2007.· U.S. Agency for International Development Office of Foreign Disaster Assistance, Fact Sheet #25, Fiscal Year...March 2011. 29 47 Matt Gutman, "Haiti: As Cholera Spreads, Frustration Builds," ABC News; 18 November 2010. 48 LTC James Ware (US Army, Retired

LEED (Trademark) for Homes - Pilot Study: Evaluation for Use in Army Family Housing

DTIC Science & Technology

2007-11-01

Star certification requirements. Once the LEED® for Homes tool is formally launched, Army Family Housing program managers will issue policy on...ER D C/ CE R L TR -0 7 -4 5 Sustainability Sustainability in Army Family Housing LEED® for Homes— Pilot Study Evaluation for Use in Army... Family Housing Lisa Bobotas and Matt Hinson Center of Standardization for Army Family Housing, Norfolk District Also: Paul Christensen, Gary

Psychosomatic symptoms as biomarkers: transcending the psyche-soma dichotomy.

PubMed

Neuman, Yair

2010-01-01

Following the advancement in understanding dynamical systems, the author presents a novel metaphor of psychosomatic symptoms as low-dimensional biomarkers. This metaphor, which transcends the old binary of psyche-soma, resonates with classical psychoanalytic concepts and with Matte-Blanco's idea of repetition as indicative of dimensionality reduction. The relevance of this metaphor for explanation, diagnosis, and treatment is illustrated through a case study of a male patient suffering from hyperprolactinemia.

Basic Studies of Distributed Discharge Limiters

DTIC Science & Technology

2014-02-10

Sputtered Lanthanum Hexaboride Film Thickness on Field Emission from Metallic Knife Edge Cathodes,” M.P. Kirley, B. Novakovic , N. Sule, M. J. Weber, I...IEEE ICOPS, San Diego, CA (2009). 99. Nishant Sule, Matt Kirley, Bozidar Novakovic , John Scharer, Irena Knezevic and John H. Booske...M. Kirley, B. Novakovic , J. Scharer, I. Knezevic, and J.H. Booske, “Field emission from low work function cathode coatings,”, Intl. Conf. Plasma

Prostate Cancer Progression and Serum Sibling (Small Integrin Binding N-Linked Glycoprotein) Levels

DTIC Science & Technology

2008-10-01

Alka Jain,2 Matt Tayback,2 and Neal S. Fedarko2 1Craniofacial and Skeletal Diseases Branch, National Institute of Dental and Craniofacial Research... Dental and Craniofacial Research, NIH, DHHS, Bethesda, MD, U.S.A. 2Division of Geriatrics, Department of Medicine, Johns Hopkins University, School of...hypophosphatemia [ Carey et al., 1986]. We have previously reported on a patient with LSNS and hypophosphatemia where the plasma phosphatonin, fibroblast

Genomic and Expression Profiling of Benign and Malignant Nerve Sheath Profiling of Benign and Malignant Nerve Sheath

DTIC Science & Technology

2007-05-01

Benign and Malignant Nerve Sheath Tumors in Neurofibromatosis Patients PRINCIPAL INVESTIGATOR: Matt van de Rijn, M.D., Ph.D. Torsten...Annual 3. DATES COVERED 1 May 2006 –30 Apr 2007 4. TITLE AND SUBTITLE 5a. CONTRACT NUMBER Genomic and Expression Profiling of Benign and Malignant Nerve...Award Number: DAMD17-03-1-0297 Title: Genomic and Expression Profiling of Benign and Malignant Nerve Sheath Tumors in Neurofibromatosis

Al Sahawa - The Awakening. Volume 4: Al Anbar Province, Area of Operations Topeka, Ramadi

DTIC Science & Technology

2016-08-01

is a multimedia instructional package to accom- modate different teaching and learning styles. B. Collection Interviews were conducted in the...the city of Fallujah in November 2004 to rid the city of insurgents. For more information , see Matt M. Matthews, Operation AL FAJR: A Study in Army... communities . Some of the messages explicitly thanked the community “for the information that you are providing on the insurgents.” This technique served

Al Sahawa - The Awakening, Volume 4: Al Anbar Province, Area of Operations Topeka, Ramadi

DTIC Science & Technology

2016-08-01

is a multimedia instructional package to accom- modate different teaching and learning styles. B. Collection Interviews were conducted in the...the city of Fallujah in November 2004 to rid the city of insurgents. For more information , see Matt M. Matthews, Operation AL FAJR: A Study in Army... communities . Some of the messages explicitly thanked the community “for the information that you are providing on the insurgents.” This technique served

Characterization and Biomimcry of Avian Nanostructured Tissues

DTIC Science & Technology

2016-01-19

keratin cortex (Maia et al. 2011) at the outer edge of barbs from TEM images. Geometric morphometrics of barb shape Digitized images of the barb thin...morphological measurements (all P > 0.05; Figure 4C; Table S2). Gloss and Barb Geometric Morphometrics Matte and glossy barbs differed significantly in...barbs and lack of multiple, clear anatomically homologous features, traditional landmark based morphometric techniques (Bookstein, 1982) would be

Ballistic Testing of Australian Bisalloy Steel for Armor Applications

DTIC Science & Technology

2007-06-01

CLASSIFICATION OF: 19a. NAME OF RESPONSIBLE PERSON Dwight D. Showalter a . REPORT UNCLASSIFIED b. ABSTRACT UNCLASSIFIED c . THIS PAGE UNCLASSIFIED 17...WASHINGTON PA 15301 A ND 2 SOUTHWEST RSCH INST C ANDERSON J WALKER 6220 CULEB SAN ANTONIO TX 7 DEPT OF APPL MECH & SVC R011 S NEMAT...Ballistic Testing of Australian Bisalloy Steel for Armor Applications by Dwight D. Showalter, William A . Gooch, Matt S. Burkins, Victoria

Techniques for Combined Arms for Air Defense

DTIC Science & Technology

2016-07-29

loss remain in effect until communications are regained. Changes to ROE and supplemental fire control measures scheduled to go into effect after...communications are lost will be implemented as scheduled . Fire Control Orders Fire control orders are commands used to control engagements on a case...or a sleep matt over windshields (Figure 3-2). Camouflage is one of the basic weapons of war. The importance, the principles, and the techniques of

Implementation Guidance Document: Properties and Types of Significant Photothermal Retinal Lesion Injuries

DTIC Science & Technology

2017-04-17

if ii does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR FORM TO THE ABOVE ORGANIZATION. 1. REPORT DATE (DD-MM-YYYY) 12...NUMBER Risk of Significant Injury Technical Working Group : Wesley Burgei, Shannon Foley, Matt Pandullo, Melissa Nass-Flores, George L. Fischer, Hugh...14. ABSTRACT The RSI Technical Working Group (TWG) developed a recommendation defining the properties and types of significant photothennal retinal

A Compilation of Necessary Elements for a Local Government Continuity of Operations Plan

DTIC Science & Technology

2006-09-01

Community Resilience in the World Trade Center Attack (Newark: Univ. of Delaware, 2003), 4. 11 Subsequently, New York City developed a COOP after... Community Resilience , 4. 27 New York City Emergency Response Task Force, Enhancing New York City’s Emergency Preparedness A Report to Mayor Michael R...Elements of Community Resilience in the World Trade Center Attack. Disaster Research Center, Univ. of Delaware, Newark, DE, 2004. Walton, Matt S

Effect of physical characteristics on bioleaching using indigenous acidophilic bacteria for recovering the valuable resources

NASA Astrophysics Data System (ADS)

Wi, D.; Kim, B.; Cho, K.; Choi, N.; Park, C.

2011-12-01

Bioleaching technology which is based on the ability of bacteria to transform solid compounds into soluble or extractable elements that can be recovered, has developed rapidly in recent decades for its advantages, such as mild reaction, low energy consumption, simple process, environmentally friendly and suitable for low-grade mine tailing and residues. This study investigated the bioleaching efficiency of copper matte under batch experimental conditions (various mineral particle size) using the indigenous acidophilic bacteria collected from acidic hot spring in Hatchnobaru, Japan. We conducted the batch experiments at three different mineral particle sizes: 0.06, 0.16 and 1.12mm. The results showed that the pH in the bacteria inoculating sample increased than initial condition, possibly due to buffer effects by phosphate ions in growth medium. After 22 days from incubation the leached accumulation content of Cu was 0.06 mm - 1,197 mg/L, 0.16 mm - 970 mg/L and 1.12 mm - 704 mg/L. Additionally, through SEM analysis we found of gypsum formed crystals which coated the copper matte surface 6 days after inoculation in 1.12mm case. This study informs basic knowledge when bacteria apply to eco-/economic resources utilization studies including the biomining and the recycling of mine waste system.

Wide-Area Persistent Energy-Efficient Maritime Sensing

DTIC Science & Technology

2015-09-30

Matt Reynolds, Lefteris Kampianakis, and Andreas Pedrosse-Engel at UW designed and tested a Software Defined Radar testbed as well as an Arduino - based ...hardware based on a software-defined radio platform. 2) Development of a standalone Arduino - based backscatter node. 3) Analysis of the limits of the... Arduino - based node that can modulate radar backscatter with data received from a sensor using a low-power Arduino Nano processor. Figure 5 shows a

Elusive Agreement: The Sporazum of 1939 and the Serb-croat Dispute in the Context of European Crisis

DTIC Science & Technology

1992-05-01

opportunities to verbalize and refine my ideas. I especially wish to thank Dr. Matt Taylor, A. J. Hood, Jeff Hooton, and Tom Little for their help and...Belgrade, provoked by the violence in Croatia, demanded "a war of extermination between the two South Slav peoples." (See Jelavich and Jelavich...June 1928, the legislative sessions had degenerated into scenes of riotous disorder, taunts, and fisticuffs. The violence reached a fatal crescendo on

Camouflage Visualization

DTIC Science & Technology

1992-04-07

reflected light seen by the viewer does not depend on the viewer’s position. Such surfaces are dull or matte and the luminance of the diffuse reflected light...vegetation and reflect only the skylight . Generally, the reflectance of the ambient light is approximately represented as a global value, constant over all the...allowing the ambient contribution provided by skylight to vary with the orientation of the surface relative to zenith. This approximation takes into

Optoelectronic Device Integration in Silicon (OpSIS)

DTIC Science & Technology

2015-10-26

silicon-on-insulator," Opt. Express 22, 17872-17879 (2014) Y. Yang, C. Galland, Y. Liu, K. Tan , R. Ding, Q. Li, K. Bergman, T. Baehr-Jones, M...Ding, Ran; Liu, Yang; Ayazi, Ali; Pinguet, Thierry; Harris, Nicholas C; Streshinsky, Matt; Lee, Poshen; Zhang, Yi; Lim, Andy Eu-Jin; “Ultralow drive...Ding, Ran; Harris, Nicholas C; Baehr-Jones, Tom; Hochberg, Michael; “Broadband on-chip optical non-reciprocity using phase modulators” Optics express

The 1973 Arab-Israeli War: The Albatross of Decisive Victory (Leavenworth Papers, Number 21)

DTIC Science & Technology

1996-01-01

bridgehead on the west bank. Sharon’s command and control would stretch from Raviv , east of Artillery Road, to Matt, west of Deversoir. SINAI Road...of firepower, Raviv launched his probing attacks toward Televizia and Hamutal. Two hours later, at 1900, Reshef embarked on his critical mission with... Tal , interview with the author, 3 July 1994, Tel Aviv, Israel. On Dayan widening the military objectives, Avraham Adan, interview with the author, 30

Benthic Flux Sampling Device, Prototype Design, Development, and Evaluation

DTIC Science & Technology

1993-08-01

collaboration with Clare Reimers and Matt Christianson at Scripps Institution of Oceanography. Trace metal chemistry was performed by John Andrews and...realistic levels for coastal and inshore sediments using a sample period of 2-4 days. The resulting flux rates will be useful in evaluating the risks...suffi= for detecting release rates at significant levels . Operation Depth. A depth capability of 50 m is sufficient to perform studies in most U.S. bays

Radar Imaging of Stationary and Moving Targets

DTIC Science & Technology

2012-06-28

Sciences Research Institute. Member of Organizing Committee for introductory workshop at MSRI • June 14-18, 2010, arranged for AFRL (Matt Ferrara ) to...Schneible, Vincent Amuso, SciTech Publishing, Inc., 2010. 2. K. Voccola, B. Yazici, M. Ferrara , and M. Cheney, “On the relationship between the generalized...echo imaging using distributed apertures in multi-path,” IEEE Radar Conference, May, 2008, Rome, Italy . 14 10. “Wideband pulse-echo imaging using

Functionalism and the Kaesong Industrial Complex

DTIC Science & Technology

2011-04-01

negotiated agreements.50 The KIC is a duty free, special economic zone with no restrictions on using foreign currency or credit cards and does not...US and South Korea began serious deliberations on a Korea-United States Free Trade Agreement (KORUS FTA ). These FTA Maj Matt Davis/AY 11 17...stabilize the peninsula and facilitate eventual unification. The US, on the other hand, prefers to exclude the KIC from the FTA for a variety of

Stress Corrosion-Cracking and Corrosion Fatigue Impact of IZ-C17+ Zinc Nickel on 4340 Steel

DTIC Science & Technology

2017-05-17

REPORT NO: NAWCADPAX/TIM-2016/189 STRESS CORROSION-CRACKING AND CORROSION FATIGUE IMPACT OF IZ-C17+ ZINC-NICKEL ON 4340 STEEL by...CORROSION-CRACKING AND CORROSION FATIGUE IMPACT OF IZ-C17+ ZINC-NICKEL ON 4340 STEEL by Craig Matzdorf Charles Lei Matt Stanley...5a. CONTRACT NUMBER STRESS CORROSION-CRACKING AND CORROSION FATIGUE IMPACT OF IZ-C17+ ZINC-NICKEL ON 4340 STEEL 5b. GRANT NUMBER 5c. PROGRAM

The Justifications for War and Peace in World Religions. Part III: Comparison of Scriptures from Seven World Religions

DTIC Science & Technology

2010-03-01

applicable passages were found in the New Testament. See the Judaism section for passages from the Old Testament (aka the Hebrew Bible or Tanakh... Hebrew Bible ) Hinduism – Bhāgavad Gītā (metaphorical only interpretation) – Rāmāyaa – Bhāgavad...angry with his brother without a cause shall be in danger of the judgment … ( Bible , Matt. 5:21-22) Hinduism The Supreme Personality of Godhead said

Implementation of an Open-Loop Rule-Based Control Strategy for a Hybrid-Electric Propulsion System On a Small RPA

DTIC Science & Technology

2011-03-01

input spindle from the engine to over tighten and apply an even greater amount of resistance to the engine shaft . Not only was this dangerous to...Mengistu, Todd Rotramel, and Matt Rippl, all of whom worked together with me to design and build the test rig for our dynamometer setup. Countless...hours were spent together planning and executing the design and building the stand itself. The AFIT machine shop crew and ENY lab techs also

Lessons from the Army’s Future Combat Systems Program

DTIC Science & Technology

2012-01-01

FCS, from the Aviation Center at Fort Rucker, Alabama, to the Chemical and Engineer Schools at Fort Leonard Wood , Mis- souri.75 The objective was to...Engineer) and Robert Woods (MGV LSI Chief Engineer), “MGV Platform Review,” circa February 2009. Not available to the general public. 22 Daniel Wasserbly...Acquisition Decision Memo- randum,” memorandum for Secretary of the Army, June 23, 2009. 59 Matt Donohue, Kris Gardner, and Major Scot Greig, “Future Combat

U.S.-China Counterterrorism Cooperation: Issues for U.S. Policy

DTIC Science & Technology

2010-01-06

rather than be confined in a camp in Albania.53 Later, they reportedly found work in a snack bar making pizzas. In February 2009, Sweden awarded asylum...Shibao, February 18, 2008; China Daily , February 19, 2008; “Terrorist Attack Prevented for Olympics: Official,” Xinhua, March 9, 2008. 85 Dan Martin...Security, and U.S. Policy, by Kenneth Katzman. 100 Matt Forney, “Uighur Fire,” Far Eastern Economic Review, February 27, 1997. 101 Daily Times (Lahore) and

U.S.-China Counterterrorism Cooperation: Issues for U.S. Policy

DTIC Science & Technology

2009-08-03

resettled in the United States or another country, rather than be confined in a camp in Albania.53 Later, they reportedly found work in a snack bar... Daily , February 19, 2008; “Terrorist Attack Prevented for Olympics: Official,” Xinhua, March 9, 2008. 85 Dan Martin, “Residents Dispute PRC Official...Rashid, “A Taliban Comeback?”, YaleGlobal, May 23, 2006. 99 Matt Forney, “Uighur Fire,” Far Eastern Economic Review, February 27, 1997. 100 Daily

Defense Attache Saigon: RNAVF Quarterly Assessment. 2nd Quarter FY74.

DTIC Science & Technology

1974-02-01

Military Assistance Command Vietnam MAP Military Assistance Program UNCLASSIFIED F IUNCLASSIFIES MASI Military Assistance Service Funded MATT Military Air...8217 operating the school. The average yearly budget is 2,~4oo,000 piasters, whiuh averages out to less than five cents per student per day. This is... average daily cargo handling rate of 959 M/T for the 2nd quarter FY711 shows continued improvement over the 773 M/T rate attained during the 1st quarter

The Need for a Regional Security System Multinational Coast Guard Unit in the Eastern Caribbean

DTIC Science & Technology

2012-06-08

the teaching staff of Staff Group 11 A (Mr Matt Bonnott, Dr Thomas Huber, LTC Andrew McIntyre) and Mr William Knight for officiating, my oral...assist me on this journey. Finally, to my wife Vonette, son Isaiah , daughter Makayla, my mother Muriel (this one is for you), and my friends (too...for the implementation of a new security risk management mechanism to enhance the security of the RSS sub-region. According to Thomas Norman in the

Spring Research Festival and NICBR Collaboration Winners Announced | Poster

Cancer.gov

By Carolynne Keenan, Contributing Writer, and Ashley DeVine, Staff Writer The winners of the 2014 Spring Research Festival (SRF), held May 7 and 8, were recognized on July 2, and included 20 NCI at Frederick researchers: Matthew Anderson, Victor Ayala, Matt Bess, Cristina Bergamaschi, Charlotte Choi, Rami Doueiri, Laura Guasch Pamies, Diana Haines, Saadia Iftikhar, Maria Kaltcheva, Wojciech Kasprzak, Balamurugan Kuppusamy, James Lautenberger, George Lountos, Megan Mounts, Uma Mudunuri, Martha Sklavos, Gloriana Shelton, Alex Sorum, and Shea Wright.

Ballistic Simulation Method for Lithium Ion Batteries (BASIMLIB) Using Thick Shell Composites (TSC) in LS-DYNA

DTIC Science & Technology

2016-08-04

BAllistic SImulation Method for Lithium Ion Batteries (BASIMLIB) using Thick Shell Composites (TSC) in LS-DYNA Venkatesh Babu, Dr. Matt Castanier, Dr...Objective • Objective and focus of this work is to develop a – Robust simulation methodology to model lithium - ion based batteries in its module and full...unlimited  Lithium Ion Phosphate (LiFePO4) battery cell, module and pack was modeled in LS-DYNA using both Thin Shell Layer (TSL) and Thick Shell

2011 Joint Service Power Expo Held in Myrtle Beach, South Carolina on May 2-5, 2011. Volume 1

DTIC Science & Technology

2011-05-05

BATTERY RESUPPLY EVERY 48 HOURS  Re-supply ties patrols to LOCs stalling operational momentum Rechargeable Batteries Even if you choose...Marc Gietter – CERDEC • Leo Grassilli – ONR • Shailesh Shah – CERDEC • Mike Ulsh – NREL / DOE Participants • Joe Bonadies – Delphi Corp. • David...Consultant • Matt Fay – General Motors • Marc Gietter – CERDEC • Leo Grassilli – ONR • Pat Hearn - Ballard • Dennis Kountz – DuPont • Rebecca

Spectral and geometrical variation of the bidirectional reflectance distribution function of diffuse reflectance standards.

PubMed

Ferrero, Alejandro; Rabal, Ana María; Campos, Joaquín; Pons, Alicia; Hernanz, María Luisa

2012-12-20

A study on the variation of the spectral bidirectional reflectance distribution function (BRDF) of four diffuse reflectance standards (matte ceramic, BaSO(4), Spectralon, and white Russian opal glass) is accomplished through this work. Spectral BRDF measurements were carried out and, using principal components analysis, its spectral and geometrical variation respect to a reference geometry was assessed from the experimental data. Several descriptors were defined in order to compare the spectral BRDF variation of the four materials.

Chemical resistance and cleanability of glazed surfaces

NASA Astrophysics Data System (ADS)

Hupa, Leena; Bergman, Roger; Fröberg, Linda; Vane-Tempest, Stina; Hupa, Mikko; Kronberg, Thomas; Pesonen-Leinonen, Eija; Sjöberg, Anna-Maija

2005-06-01

Adhesion of soil on glazed surfaces and their cleanability depends on chemical composition, phase composition, and roughness of the surface. The surface can be glossy consisting mainly of a smooth glassy phase. A matt and rough surface consists of a glassy phase and one or more crystalline phases. The origin and composition of the crystalline phases affect the chemical resistance and the cleanability of the surface. Fifteen experimental glossy and matt glazes were soaked in a slightly alkaline cleaning agent solution. The surfaces were spin-coated with sebum, i.e. a soil component typical for sanitary facilities. After wiping out the soil film in a controlled manner, the surface conditions and the soil left were evaluated with colour measurements, SEM/EDXA and COM. The results show that wollastonite-type crystals in the glaze surfaces were attacked in aqueous solutions containing typical cleaning agents. This corrosion led to significant decrease in the cleanability of the surface. The other crystal types observed, i.e. diopside and quartz crystals were not corroded, and the cleanability of glazes containing only these crystals was not changed in the cleaning agent exposures. Also the glassy phase was found to be attacked in some formulations leading to a somewhat decreased cleanability. The repeated soiling and cleaning procedures indicated that soil is accumulated on rough surfaces and surfaces which were clearly corroded by the cleaning agent.

Genome-Wide Nucleic Acid/Protein Interaction in Breast Cancer

DTIC Science & Technology

2005-04-01

Chen W, Zhang J et al: Large-scale genotyping of complex DNA. Nat Biotechnol 2003, 21(10):1233-1237. 25. Bolstad BM, Irizarry RA, Astrand M, Speed TP...2124836802660188/sup8.xls 235 Analysis of RNA-protein interactions by flow cytometry Alexander S Brodsky’*, Angus PR Johnston 2, Matt Trau 2 & Pamela A Silver1...Natl Acad Sci USA (2001) 98(23):12954-12959. genotyping using the Qbead system: A quantum dot-encoded microsphere-based assay. Nucleic Acids Res (2003

Assessing Automatic Aid as an Emergency Response Model

DTIC Science & Technology

2013-12-01

children, Nicholas, Spencer , Kayla, and Krista: I appreciate your patience and understanding. I hope that I am a role model to you, proving that you...noted by all interview subjects and provides for the closest resource “without regard to the name on the door” as noted by Battalion Chief Matt Herbert ...states that he “expects to go to Alexandria or Fairfax everyday,”96 and Herbert expands on the close interaction by noting, “crews have dinner, drill

An Evaluation of the Media Coverage Concerning the Mission to Secure the Dog Kennel during the Panama Invasion on December 20, 1989

DTIC Science & Technology

1990-12-01

34 Reflections, Winter 1989, 13. Matthews, William. "Commanders Downplay Women In Combat," Army Times, February 26, 1990, 9. Maze, Rick . "Byron: No Women in...Combat," Army Times, March 26, 1990. 18. Maze, Rick . "Women Need To Learn Infantry Skills, Warner Says," Arm7y Times, February 5, 1990, 10. McCarthy...January 4, 1990, 3. Yancey , Matt. "Women-Combat," Associated Press, January 14, 1990. Yarbrough, Jean. "The Feminist Mistake," Policy Review, 1983, 48

In Conversation with Sarah and Matt: Perspectives on Creating and Performing Original Music

ERIC Educational Resources Information Center

McGillen, Christopher William

2004-01-01

This paper is the result of a research project that set out to document a group of adolescent musicians in a rural Australian secondary school as they wrote and performed their own music. The processes they developed are reflective of a cooperative approach to group composition where upwards of 21 students composed and "jammed" their way…

Design and Fabrication of an Elastomer Test Machine.

DTIC Science & Technology

1988-05-01

provided by the Army Materials Technology Laboratories, were tested with the ETM at U.C.N.W. RUBBER 15 TP14AX 15 NAT25A 15 SBR26 NBR 6 FIBREGLASS REINFORCED...stationary, tilted and rotational) are comparable with 0001 AM and 0001 AN samples. SAMPLE NBR 62 This is a matt black, rubber based sample described as a... RUBBER 0001 AM 0001 AN 0001 AE -6- POLYURETHANE ECP 1 S ECP 2 Morbay 2690 Budd 20 1080 (Polyester) ) Gallagher Corporation A8 (Polyester) ) All

The Search for Life Beyond Earth

NASA Image and Video Library

2014-07-14

Matt Mountain, Director of the Space Telescope Science Institute and telescope scientist for the James Webb Space Telescope, speaks during a panel discussion on the search for life beyond Earth in the James E. Webb Auditorium at NASA Headquarters on Monday, July 14, 2014 in Washington, DC. The panel discussed how NASA's space-based observatories are making new discoveries and how the agency's new telescope, the James Webb Space Telescope, will continue this path of discovery after its schedule launch in 2018. Photo Credit: (NASA/Joel Kowsky)

A Squeeze and Heat Approach to Water Reclamation

DTIC Science & Technology

2012-05-01

mg/L Coliform 0 CFU/100 mL 9 2012 NDIA E2S2, New Orleans, LA 5/24/2012 • Water quality criteria defined by the Department of the Army, Office...Copyright © 2012 DRS Technologies, Inc. All rights reserved. A “Squeeze and Heat” Approach to Water Reclamation Al Garcia Bryan Lanterman Matt...REPORT DATE MAY 2012 2. REPORT TYPE 3. DATES COVERED 00-00-2012 to 00-00-2012 4. TITLE AND SUBTITLE A ’Squeeze and Heat’ Approach to Water

Static coefficient of friction between stainless steel and PMMA used in cemented hip and knee implants.

PubMed

Nuño, N; Groppetti, R; Senin, N

2006-11-01

Design of cemented hip and knee implants, oriented to improve the longevity of artificial joints, is largely based on numerical models. The static coefficient of friction between the implant and the bone cement is necessary to characterize the interface conditions in these models and must be accurately provided. The measurement of this coefficient using a repeatable and reproducible methodology for materials used in total hip arthroplasty is missing from the literature. A micro-topographic surface analysis characterized the surfaces of the specimens used in the experiments. The coefficient of friction between stainless steel and bone cement in dry and wet conditions using bovine serum was determined using a prototype computerized sliding friction tester. The effects of surface roughness (polished versus matt) and of contact pressure on the coefficient of friction have also been investigated. The serum influences little the coefficient of friction for the matt steel surface, where the mechanical interactions due to higher roughness are still the most relevant factor. However, for polished steel surfaces, the restraining effect of proteins plays a very relevant role in increasing the coefficient of friction. When the coefficient of friction is used in finite element analysis, it is used for the debonded stem-cement situation. It can thus be assumed that serum will propagate between the stem and the cement mantle. The authors believe that the use of a static coefficient of friction of 0.3-0.4, measured in the present study, is appropriate in finite element models.

ARC-2007-ACD07-0170-005

NASA Image and Video Library

2007-07-19

Haughton-Mars Project: - Photo credit to Matt Deans (NASA) K-10 Rover 'Black' and K-10 'RED' conducting systematic site survey at Haughton Creater Devon Island, Nunavut, in the Canadian high arctic. Which lies in the 'frost rubble zone' of the Earth, i.e., in a polar desert environment and is the only crater known to lie in such an environment. Beginning in 1997, the crater and its surroundings are studied as a promising Mars analog by the NASA-led Haughton-Mars Project. (photo reference MCD_0888.JPG)

Shuttle Enterprise Flight To New York

NASA Image and Video Library

2012-04-27

Space shuttle Enterprise, mounted atop a NASA 747 Shuttle Carrier Aircraft (SCA), is seen as it flies over the Hudson River, Friday, April 27, 2012, in New York. Enterprise was the first shuttle orbiter built for NASA performing test flights in the atmosphere and was incapable of spaceflight. Originally housed at the Smithsonian's Steven F. Udvar-Hazy Center, Enterprise will be demated from the SCA and placed on a barge that will eventually be moved by tugboat up the Hudson River to the Intrepid Sea, Air & Space Museum in June. Photo Credit: (NASA/Matt Hedges)

ARC-2007-ACD07-0170-007

NASA Image and Video Library

2007-07-20

Haughton-Mars Project: - Photo credit to Matt Deans (NASA) K-10 Rover 'Red' base camp at Haughton Creater Devon Island, Nunavut, in the Canadian high arctic. Which lies in the 'frost rubble zone' of the Earth, i.e., in a polar desert environment and is the only crater known to lie in such an environment. Beginning in 1997, the crater and its surroundings are studied as a promising Mars analog by the NASA-led Haughton-Mars Project. (photo reference K10-R-haughton.jpg - crop of ACD07-0170-4 MCD_0859.JPG)

'The right direction'. Primary-care docs see promise in CMS' proposed pay for non face-to-face work.

PubMed

Robeznieks, Andis

2013-07-15

The CMS has proposed paying physicians for managing patients apart from face-to-face office visits. Among the details under consideration are requiring practices to use an electronic health-record system that supports access to care, care coordination, care management and communications. "It's a step in the right direction. The devil will be in the details and, if the burden of documentation is so high, people may choose not to spend their time doing it," says Dr. Matt Handley, physician and medical director for quality at the Group Health Cooperative.

Flight Test of Advanced Digital Control Concepts.

DTIC Science & Technology

1982-03-01

34 equations, and this result is then compared against the "model" equations. OPTION :::CREATrE ,CIEY, COFPY, MAT ,AMAT, COIP-YUMAT, BMAT , 74 COPFY, CMAT...BMATY .-COPY, NMAT, AMAT ,72 ,COPY, GMAT, RMA, COP:Y, (MAT, BMA’TCOFY, MA T ,AMAT >74, COPY, CMA’TsmA, PCOPY, RMAT, BmAT , pCOPYVMiAT , AMAo.T 72...COP’Y, MAT, AMAT, >75, COPY , MAtT, BMAT , COPY, ZMAT, AMAT, 74 ,COP’Y, MAT, TMAT, COPY, VMAT, AMAT, .:COPY ,RMAiT, MAT,73,COPW GMAT, E4MAT, COP-"YTMAT

Acoustic Gravity Waves Generated by an Oscillating Ice Sheet in Arctic Zone

NASA Astrophysics Data System (ADS)

Abdolali, A.; Kadri, U.; Kirby, J. T., Jr.

2016-12-01

We investigate the formation of acoustic-gravity waves due to oscillations of large ice blocks, possibly triggered by atmospheric and ocean currents, ice block shrinkage or storms and ice-quakes.For the idealized case of a homogeneous weakly compressible water bounded at the surface by ice sheet and a rigid bed, the description of the infinite family of acoustic modes is characterized by the water depth h and angular frequency of oscillating ice sheet ω ; The acoustic wave field is governed by the leading mode given by: Nmax=\\floor {(ω h)/(π c)} where c is the sound speed in water and the special brackets represent the floor function (Fig1). Unlike the free-surface setting, the higher acoustic modes might exhibit a larger contribution and therefore all progressive acoustic modes have to be considered.This study focuses on the characteristics of acoustic-gravity waves generated by an oscillating elastic ice sheet in a weakly compressible fluid coupled with a free surface model [Abdolali et al. 2015] representing shrinking ice blocks in realistic sea state, where the randomly oriented ice sheets cause inter modal transition and multidirectional reflections. A theoretical solution and a 3D numerical model have been developed for the study purposes. The model is first validated against the theoretical solution [Kadri, 2016]. To overcome the computational difficulties of 3D models, we derive a depth-integrated equation valid for spatially varying ice sheet thickness and water depth. We show that the generated acoustic-gravity waves contribute significantly to deep ocean currents compared to other mechanisms. In addition, these waves travel at the sound speed in water carrying information on ice sheet motion, providing various implications for ocean monitoring and detection of ice-quakes. Fig1:Snapshots of dynamic pressure given by an oscillating ice sheet; h=4500m, c=1500m/s, semi-length b=10km, ζ =1m, omega=π rad/s. Abdolali, A., Kirby, J. T. and Bellotti, G

Influence of high ambient illuminance and display luminance on readability and subjective preference

NASA Astrophysics Data System (ADS)

De Moor, Katrien; Andrén, Börje; Guo, Yi; Brunnström, Kjell; Wang, Kun; Drott, Anton; Hermann, David S.

2015-03-01

Many devices, such as tablets, smartphones, notebooks, fixed and portable navigation systems are used on a (nearly) daily basis, both in in- and outdoor environments. It is often argued that contextual factors, such as the ambient illuminance in relation to characteristics of the display (e.g., surface treatment, screen reflectance, display luminance …) may have a strong influence on the use of such devices and corresponding user experiences. However, the current understanding of these influence factors is still rather limited. In this work, we therefore focus in particular on the impact of lighting and display luminance on readability, visual performance, subjective experience and preference. A controlled lab study (N=18) with a within-subjects design was performed to evaluate two car displays (one glossy and one matte display) in conditions that simulate bright outdoor lighting conditions. Four ambient luminance levels and three display luminance settings were combined into 7 experimental conditions. More concretely, we investigated for each display: (1) whether and how readability and visual performance varied with the different combinations of ambient luminance and display luminance and (2) whether and how they influenced the subjective experience (through self-reported valence, annoyance, visual fatigue) and preference. The results indicate a limited, yet negative influence of increased ambient luminance and reduced contrast on visual performance and readability for both displays. Similarly, we found that the self-reported valence decreases and annoyance and visual fatigue increase as the contrast ratio decreases and ambient luminance increases. Overall, the impact is clearer for the matte display than for the glossy display.

Linkage between canopy water storage and drop size distributions of leaf drips

NASA Astrophysics Data System (ADS)

Nanko, Kazuki; Watanabe, Ai; Hotta, Norifumi; Suzuki, Masakazu

2013-04-01

Differences in drop size distribution (DSD) of leaf drips among tree species have been estimated and physically interpreted to clarify the leaf drip generation process. Leaf drip generation experiments for nine species were conducted in an indoor location without foliage vibration using an automatic mist spray. Broad-leaved species produced a similar DSD among species whose leaves had a matte surface and a second similar DSD among species whose leaves had a coated surface. The matte broad leaves produced a larger and wider range of DSDs than the coated broad leaves. Coated coniferous needles had a wider range of DSDs than the coated broad leaves and different DSDs were observed for different species. The species with shorter dense needles generated a larger DSD. The leaf drip diameter was calculated through the estimation of a state of equilibrium of a hanging drop on the leaves based on physical theory. The calculations indicated that the maximum diameter of leaf drips was determined by the contact angle, and the range of DSDs was determined by the variation in contact length and the contact diameter at the hanging points. The results revealed that leaf drip DSD changed due to variations in leaf hydrophobicity, leaf roughness, leaf geometry and leaf inclination among the different tree species. This study allows the modelization of throughfall DSD. Furthermore, it indicates the possibility of interpreting canopy water processes from canopy water storage to drainage through the contact angle and leaf drip DSD. The part of this study is published in Nanko et al. (2013, Agric. Forest. Meteorol. 169, 74-84).

26. A sepia photograph, 7 1/2" x 8 1/2" oh ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

26. A sepia photograph, 7 1/2" x 8 1/2" oh semi-matte paper, aerial oblique of central Terre Haute with negative inscribed letters (prints on positive as white) along the bottom margin, "(02105-631K-118) (3-10-37. 10:30A) (R-1000) (State Normal College, Terre Haute, Ind.)" This view taken looking east shows the gas building in the near foreground right. On the reverse in red pencil, "Campus Scenes 10" and in black pencil, "1937". Source: Indiana State University Archives. - John T. Beasley Building, 632 Cherry Street (between Sixth & Seventh Streets), Terre Haute, Vigo County, IN

Butterfly wing coloration studied with a novel imaging scatterometer

NASA Astrophysics Data System (ADS)

Stavenga, Doekele

2010-03-01

Animal coloration functions for display or camouflage. Notably insects provide numerous examples of a rich variety of the applied optical mechanisms. For instance, many butterflies feature a distinct dichromatism, that is, the wing coloration of the male and the female differ substantially. The male Brimstone, Gonepteryx rhamni, has yellow wings that are strongly UV iridescent, but the female has white wings with low reflectance in the UV and a high reflectance in the visible wavelength range. In the Small White cabbage butterfly, Pieris rapae crucivora, the wing reflectance of the male is low in the UV and high at visible wavelengths, whereas the wing reflectance of the female is higher in the UV and lower in the visible. Pierid butterflies apply nanosized, strongly scattering beads to achieve their bright coloration. The male Pipevine Swallowtail butterfly, Battus philenor, has dorsal wings with scales functioning as thin film gratings that exhibit polarized iridescence; the dorsal wings of the female are matte black. The polarized iridescence probably functions in intraspecific, sexual signaling, as has been demonstrated in Heliconius butterflies. An example of camouflage is the Green Hairstreak butterfly, Callophrys rubi, where photonic crystal domains exist in the ventral wing scales, resulting in a matte green color that well matches the color of plant leaves. The spectral reflection and polarization characteristics of biological tissues can be rapidly and with unprecedented detail assessed with a novel imaging scatterometer-spectrophotometer, built around an elliptical mirror [1]. Examples of butterfly and damselfly wings, bird feathers, and beetle cuticle will be presented. [4pt] [1] D.G. Stavenga, H.L. Leertouwer, P. Pirih, M.F. Wehling, Optics Express 17, 193-202 (2009)

Testing Limits on Matte Surface Color Perception in Three-Dimensional Scenes with Complex Light Fields

PubMed Central

Doerschner, K.; Boyaci, H.; Maloney, L. T.

2007-01-01

We investigated limits on the human visual system’s ability to discount directional variation in complex lights field when estimating Lambertian surface color. Directional variation in the light field was represented in the frequency domain using spherical harmonics. The bidirectional reflectance distribution function of a Lambertian surface acts as a low-pass filter on directional variation in the light field. Consequently, the visual system needs to discount only the low-pass component of the incident light corresponding to the first nine terms of a spherical harmonics expansion (Basri & Jacobs, 2001; Ramamoorthi & Hanrahan, 2001) to accurately estimate surface color. We test experimentally whether the visual system discounts directional variation in the light field up to this physical limit. Our results are consistent with the claim that the visual system can compensate for all of the complexity in the light field that affects the appearance of Lambertian surfaces. PMID:18053846

Episode 2: The Clean Energy Geek Squad (Direct Current – An Energy.gov Podcast)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lantero, Allison; Dozier, Matt; Phear, Nicky

2016-06-03

In this episode of Direct Current - An Energy.gov Podcast, Matt calls up the Clean Energy Solutions Center, a "help desk" that provides free expert advice on clean energy policy to governments all over the world. Allison talks to Nicky Phear, a professor who cycles hundreds of miles across Montana to teach her students about climate change. Nicky just received a big award at the C3E Women in Clean Energy Symposium for her education work, and she's basically an energy rockstar. Dan and Paul put their heads together to come up with a better way to measure energy -- startingmore » with the humble burrito.« less

Episode 2: The Clean Energy Geek Squad (Direct Current – An Energy.gov Podcast)

ScienceCinema

Lantero, Allison; Dozier, Matt; Phear, Nicky; Wood, Daniel; Lester, Paul

2018-05-04

In this episode of Direct Current - An Energy.gov Podcast, Matt calls up the Clean Energy Solutions Center, a "help desk" that provides free expert advice on clean energy policy to governments all over the world. Allison talks to Nicky Phear, a professor who cycles hundreds of miles across Montana to teach her students about climate change. Nicky just received a big award at the C3E Women in Clean Energy Symposium for her education work, and she's basically an energy rockstar. Dan and Paul put their heads together to come up with a better way to measure energy -- starting with the humble burrito.

Scattering by a boundary with complex structure.

PubMed

Naplekov, D M; Tur, A V; Yanovsky, V V

2013-04-01

The distribution of escape times is usually studied in open billiards theory. In this work, we will concentrate on another important question: The distribution of outgoing rays by exit directions, which we refer to as billiard's indicatrix. It can be obtained analytically and consists of two parts: the symmetric diffuse part and the asymmetric directed part. The criterion for the separation of the indicatrix into these two parts is established. The asymmetry of the directed part of the indicatrix and the influence of the billiard's borders on it is investigated. We also propose a method of the creation of a matte surface model using open billiards with a fully diffuse indicatrix.

PREFACE: Theory, Modelling and Computational methods for Semiconductors

NASA Astrophysics Data System (ADS)

Migliorato, Max; Probert, Matt

2010-04-01

These conference proceedings contain the written papers of the contributions presented at the 2nd International Conference on: Theory, Modelling and Computational methods for Semiconductors. The conference was held at the St Williams College, York, UK on 13th-15th Jan 2010. The previous conference in this series took place in 2008 at the University of Manchester, UK. The scope of this conference embraces modelling, theory and the use of sophisticated computational tools in Semiconductor science and technology, where there is a substantial potential for time saving in R&D. The development of high speed computer architectures is finally allowing the routine use of accurate methods for calculating the structural, thermodynamic, vibrational and electronic properties of semiconductors and their heterostructures. This workshop ran for three days, with the objective of bringing together UK and international leading experts in the field of theory of group IV, III-V and II-VI semiconductors together with postdocs and students in the early stages of their careers. The first day focused on providing an introduction and overview of this vast field, aimed particularly at students at this influential point in their careers. We would like to thank all participants for their contribution to the conference programme and these proceedings. We would also like to acknowledge the financial support from the Institute of Physics (Computational Physics group and Semiconductor Physics group), the UK Car-Parrinello Consortium, Accelrys (distributors of Materials Studio) and Quantumwise (distributors of Atomistix). The Editors Acknowledgements Conference Organising Committee: Dr Matt Probert (University of York) and Dr Max Migliorato (University of Manchester) Programme Committee: Dr Marco Califano (University of Leeds), Dr Jacob Gavartin (Accelrys Ltd, Cambridge), Dr Stanko Tomic (STFC Daresbury Laboratory), Dr Gabi Slavcheva (Imperial College London) Proceedings edited and compiled by Dr

Reverse Engineering of Corinthian Pigment Processing and Firing Technologies on Archaic Polychrome Ceramics

NASA Astrophysics Data System (ADS)

Klesner, Catherine Elizabeth

Decorative, polychrome ceramics from Corinth, Greece, produced during the 8th-6th centuries B.C.E. are luxury goods that were widely traded throughout Greece and the Mediterranean. The decorated ceramics were produced in a variety of shapes, including aryballos, alabastron, and olpe. They were decorated with slip-glazes in distinctive white, black, red, yellow, and purple colors, and in a variety of surface finishes, matte, semi-matte and glossy. Artisans in Corinthian workshops experimented to change the colors of the slips by varying the type and amount of iron-rich raw materials. They also varied the composition of the clay used as a binder and the amount of flux used as a sintering aid to promote glass formation. This research reconstructs the technology used by the Corinthian craftsmen to produce the Archaic polychrome ceramics, and shows how these technologies differed from the production of better known, more prestigious Athenian black-figure and red-figure ceramics. Through microstructural examination of archaeological samples and replication experiments, this thesis proposes that the purple iron oxide pigment is the result of acid treatment and oxidation of iron metal. The firing temperature range of the Corinthian polychrome ceramics was determined experimentally to be 925-1025°C, which is higher than previously reported and similar to that reported for Corinthian transport amphoras. The firing range is higher by 50-150°C than the Athenian black-figure and red-figure ceramics. Samples of Corinthian polychrome and Athenian black-figure ceramics from the Marie Farnsworth collection at the University of Arizona were tested and compared to Corinthian clay collections. Analytical techniques included Fourier-transform infrared spectroscopy (FTIR), scanning-electron microscopy with energy-dispersive spectroscopy (SEM-EDS), micro-Raman spectroscopy, and wavelength-dispersive electron microprobe (EPMA with BSE-SEM).

The NGST Yardstick Integrated Science Instrument Module (ISIM) Feasibility Study

NASA Astrophysics Data System (ADS)

Greenhouse, M. A.; NGST ISIM Team

1999-05-01

The Next Generation Space Telescope (NGST) Integrated Science Instrument Module (ISIM) is a distributed system consisting of a cryogenic instrument module that is integrated with the Optical Telescope Assembly (OTA) and science processors, software, and other electronics located in the Space Support Module (SSM). The ISIM system provides structure, environment, and data handling for several modular science instruments as well as several components of the OTA optics train. An ISIM baseline design and feasibility study is ongoing at GSFC. This pre-Phase A design was developed for integration with the Yardstick NGST architecture and packaging in a 5 m class EELV fairing. The goals of this study are to: [1] demonstrate mission science feasibility, [2] assess ISIM engineering and cost feasibility, [3] identify ISIM technology challenge areas,and [4] enable smart customer procurement of the NGST. In depth results from this work beyond those displayed here can be found at: http://www701.gsfc.nasa.gov/isim/isim.htm The flight ISIM will be developed by a GSFC led IPT that includes members from the STScI and, during Phase A/B, will grow to include the NGST Prime Contractor, and science instrument development teams from European, Canadian , and US science communities. Science instruments will be competitively procured from the science community, and will be integrated into the ISIM by GSFC. The flight qualified ISIM will then be delivered by GSFC to the NGST Prime Contractor for observatory level integration. At the start of NGST Phase A (Spring 1999), two competing prime contractors will begin development of separate NGST architectures, and the ISIM IPT will develop two ISIM designs corresponding to these architectures. Down selection to a single design will occur during mid 2001. The ISIM team welcomes science community feedback. Contact the IPT lead: Matt Greenhouse: matt@stars.gsfc.nasa.gov.

Veg-03 Pillows Preparation for Flight

NASA Image and Video Library

2016-03-21

Inside a laboratory in the Space Station Processing Facility at NASA’s Kennedy Space Center in Florida, research scientists prepare the plant pillows for the Veg-03 experiment that will be delivered to the International Space Station aboard the eighth SpaceX Dragon commercial resupply mission. Matt Romeyn, a NASA pathways intern, inserts a measured amount of calcined clay, or space dirt, into one of the plant pillows. The Veg-03 plant pillows will contain ‘Tokyo Bekana’ cabbage seeds and lettuce seeds for NASA’s third Veggie plant growth system experiment. The experiment will continue NASA’s deep space plant growth research to benefit the Earth and the agency’s journey to Mars.

Veg-03 Pillows Preparation for Flight

NASA Image and Video Library

2016-03-21

Inside a laboratory in the Space Station Processing Facility at NASA’s Kennedy Space Center in Florida, research scientists prepare the plant pillows for the Veg-03 experiment that will be delivered to the International Space Station aboard the eighth SpaceX Dragon commercial resupply mission. From left, are Matt Romeyn, NASA pathways intern; Dr. Gioia Massa, NASA payload scientist for Veggie; and Dr. Mathew Mickens, a post-doctoral researcher. The Veg-03 plant pillows will contain ‘Tokyo Bekana’ cabbage seeds and lettuce seeds for NASA’s third Veggie plant growth system experiment. The experiment will continue NASA’s deep space plant growth research to benefit the Earth and the agency’s journey to Mars.

Veg-03 Pillows Preparation for Flight

NASA Image and Video Library

2016-03-21

Inside a laboratory in the Space Station Processing Facility at NASA’s Kennedy Space Center in Florida, research scientists prepare the plant pillows for the Veg-03 experiment that will be delivered to the International Space Station aboard the eighth SpaceX Dragon commercial resupply mission. Matt Romeyn, a NASA pathways intern, measures out the calcined clay, or space dirt, for one of the plant pillows. The Veg-03 plant pillows will contain ‘Tokyo Bekana’ cabbage seeds and lettuce seeds for NASA’s third Veggie plant growth system experiment. The experiment will continue NASA’s deep space plant growth research to benefit the Earth and the agency’s journey to Mars.

Morphological Differentiation of the Eggs of North American Container-Inhabiting Aedes Mosquitoes.

PubMed

Bova, Jake; Paulson, Sally; Paulson, Greg

2016-09-01

Aedes aegypti , Ae. albopictus, Ae. japonicus japonicus, and Ae. triseriatus eggs are described with the aid of color images and images from scanning electron microscopy. All eggs were broadly cigar shaped with Ae. triseriatus and Ae. j japonicus eggs being dull or matte black, while Ae. albopictus and Ae. aegypti eggs were shiny jet black. Aedes triseriatus eggs were lighter in color and had a rougher appearance when compared to those of Ae. j. japonicus. Aedes albopictus and Ae. aegypti eggs can be differentiated by the distinct presence of micropylar collars in Ae. aegypti. Our results reduce the need to rear these mosquitoes, reducing labor and time while providing an accurate identification of the vector mosquitoes.

Understanding the role of emotion in sense-making: a semiotic psychoanalytic oriented perspective.

PubMed

Salvatore, Sergio; Venuleo, Claudia

2008-03-01

We propose a model of emotion grounded on Ignacio Matte Blanco's theory of the unconscious. According to this conceptualization, emotion is a generalized representation of the social context actors are involved in. We discuss how this model can help to better understand the sensemaking processes. For this purpose we present a hierarchical model of sensemaking based on the distinction between significance--the content of the sign--and sense--the psychological value of the act of producing the sign in the given contingence of the social exchange. According to this model, emotion categorization produces the frame of sense regulating the interpretation of the sense of the signs, therefore creating the psychological value of the sensemaking.

Optimal decision making modeling for copper-matte Peirce-Smith converting process by means of data mining

NASA Astrophysics Data System (ADS)

Song, Yanpo; Peng, Xiaoqi; Tang, Ying; Hu, Zhikun

2013-07-01

To improve the operation level of copper converter, the approach to optimal decision making modeling for coppermatte converting process based on data mining is studied: in view of the characteristics of the process data, such as containing noise, small sample size and so on, a new robust improved ANN (artificial neural network) modeling method is proposed; taking into account the application purpose of decision making model, three new evaluation indexes named support, confidence and relative confidence are proposed; using real production data and the methods mentioned above, optimal decision making model for blowing time of S1 period (the 1st slag producing period) are developed. Simulation results show that this model can significantly improve the converting quality of S1 period, increase the optimal probability from about 70% to about 85%.

Etching Behavior of Aluminum Alloy Extrusions

NASA Astrophysics Data System (ADS)

Zhu, Hanliang

2014-11-01

The etching treatment is an important process step in influencing the surface quality of anodized aluminum alloy extrusions. The aim of etching is to produce a homogeneously matte surface. However, in the etching process, further surface imperfections can be generated on the extrusion surface due to uneven materials loss from different microstructural components. These surface imperfections formed prior to anodizing can significantly influence the surface quality of the final anodized extrusion products. In this article, various factors that influence the materials loss during alkaline etching of aluminum alloy extrusions are investigated. The influencing variables considered include etching process parameters, Fe-rich particles, Mg-Si precipitates, and extrusion profiles. This study provides a basis for improving the surface quality in industrial extrusion products by optimizing various process parameters.

Veg-03 Pillows Preparation for Flight

NASA Image and Video Library

2016-03-21

Inside a laboratory in the Space Station Processing Facility at NASA’s Kennedy Space Center in Florida, research scientists prepare the plant pillows for the Veg-03 experiment that will be delivered to the International Space Station aboard the eighth SpaceX Dragon commercial resupply mission. Matt Romeyn, a NASA pathways intern, measures out the calcined clay, or space dirt, for one of the plant pillows. To his right is Dr. Gioia Massa, NASA payload scientist for Veggie. The Veg-03 plant pillows will contain ‘Tokyo Bekana’ cabbage seeds and lettuce seeds for NASA’s third Veggie plant growth system experiment. The experiment will continue NASA’s deep space plant growth research to benefit the Earth and the agency’s journey to Mars.

Use of Industrial Waste (Al-Dross, Red Mud, Mill Scale) as Fluxing Agents in the Sulfurization of Fe-Ni-Cu-Co Alloy by Carbothermic Reduction of Calcium Sulfate

NASA Astrophysics Data System (ADS)

Heo, Jung Ho; Jeong, Eui Hyuk; Nam, Chul Woo; Park, Kyung Ho; Park, Joo Hyun

2018-06-01

The use of industrial waste [mill scale (MS), red mud (RM), Al-dross (AD)] as fluxing agents in the sulfurization of Fe-Ni-Cu-Co alloy to matte (Fe-Ni-Cu-Co-S) by carbothermic reduction of CaSO4 was investigated at 1673 K (1400 °C). The sulfurization efficiency (SE) was 76 (± 2) pct at RM or AD single fluxing. However, SE drastically increased to approximately 89 pct at a `5AD + 5MS' combination, which was equivalent to reagent-grade chemical `5Al2O3 + 5Fe2O3' fluxing (SE = 88 pct). The present results can be used to improve the cost-effective recovery of rare metals (Ni and Co) from deep sea manganese nodules.

High Speed Prototype Car Test

NASA Image and Video Library

2014-01-10

CAPE CANAVERAL, Fla. - The Performance Power Racing and Hennessey Performance teams pose with a Hennessey Venom GT at the 3.5-mile long runway at the Shuttle Landing Facility at NASA's Kennedy Space Center in Florida. The teams are, from left, Hennessey's John Heinricy, John Hennessey, Brian Smith, Performance Power Racing's Johnny Bohmer, Matt Lundy and Jeff McEachran. The flat concrete runway is one of the few places in the world where high performance automobiles can be tested for aerodynamic and safety designs. Hennessey Performance of Sealy, Texas, worked with Performance Power Racing in West Palm Beach to arrange use of the NASA facility. Performance Power Racing has conducted numerous engineering tests on the runway with a variety of vehicles.

Photometric model of diffuse surfaces described as a distribution of interfaced Lambertian facets.

PubMed

Simonot, Lionel

2009-10-20

The Lambertian model for diffuse reflection is widely used for the sake of its simplicity. Nevertheless, this model is known to be inaccurate in describing a lot of real-world objects, including those that present a matte surface. To overcome this difficulty, we propose a photometric model where the surfaces are described as a distribution of facets where each facet consists of a flat interface on a Lambertian background. Compared to the Lambertian model, it includes two additional physical parameters: an interface roughness parameter and the ratio between the refractive indices of the background binder and of the upper medium. The Torrance-Sparrow model--distribution of strictly specular facets--and the Oren-Nayar model--distribution of strictly Lambertian facets--appear as special cases.

Use of Industrial Waste (Al-Dross, Red Mud, Mill Scale) as Fluxing Agents in the Sulfurization of Fe-Ni-Cu-Co Alloy by Carbothermic Reduction of Calcium Sulfate

NASA Astrophysics Data System (ADS)

Heo, Jung Ho; Jeong, Eui Hyuk; Nam, Chul Woo; Park, Kyung Ho; Park, Joo Hyun

2018-03-01

The use of industrial waste [mill scale (MS), red mud (RM), Al-dross (AD)] as fluxing agents in the sulfurization of Fe-Ni-Cu-Co alloy to matte (Fe-Ni-Cu-Co-S) by carbothermic reduction of CaSO4 was investigated at 1673 K (1400 °C). The sulfurization efficiency (SE) was 76 (± 2) pct at RM or AD single fluxing. However, SE drastically increased to approximately 89 pct at a `5AD + 5MS' combination, which was equivalent to reagent-grade chemical `5Al2O3 + 5Fe2O3' fluxing (SE = 88 pct). The present results can be used to improve the cost-effective recovery of rare metals (Ni and Co) from deep sea manganese nodules.

Silurian to Early Carboniferous plate tectonic model of Central Europe

NASA Astrophysics Data System (ADS)

Golonka, Jan; Barmuta, Jan; Barmuta, Maria

2014-05-01

The presented plate tectonic model focuses on Silurian to Early Carboniferous evolution of Central Europe with special attention given to the Sudetes region (north and north-east part of the Bohemian Massif). During our studies, we tested alternative models focused on the position of the Armorican terranes, known as the Armorican Terrane Assembly (ATA) (e.g.: Matte, 2001) and tried to refine the existing reconstructions, which describe Armorica as an individual continent during the Late Silurian and Devonian (e.g. Lewandowski, 2003, Winchester, 2002). Our plate tectonic model depict that these small blocks were scattered along the northern margin of Gondwana, where they formed the "Armorican Spour" as suggested by Kroner and Romer (2013). The seaways were present between blocks. Because of the north dipping subduction zone along the southern margin of the Laurussia continent the back-arc basin and island arc were formed. The narrowing of the Rheic ocean led to the complicated collision of Gondwana and Laurussia. Three main stages of this event can be distinguished: (1) collision of the Armorican Spour with the Laurussian island arc, (2) back-arc basin closure, (3) final Gondwana and Laurussian collision. Those stages correlate well with Variscan Subduction Zone System proposed by Kroner and Romer (2013). Interactive modeling performed in GPlates, shows that the presented model is valid from kinematic and geometrical point of view. Kroner U., Romer R., L., 2013, Two plates - many subduction zones: the Variscan orogeny reconsidered. Gondwana Research, 24: 298-329. Lewandowski M., 2003, Assembly of Pangea: Combined paleomagnetic and paleoclimatic approach, Advances in Geophysics, 46: 199-236 Matte P., 2001, The Variscan collage and orogeny (480 290 Ma) and the tectonic definition of the Armorica microplate: a review. Terra Nova, 13: 122¨C128. Winchester J., A., The Pace TMR Network Team, 2002, Palaeozoic amalgamation of Central Europe: new results from recent

Radiochromic film dosimetry: considerations on precision and accuracy for EBT2 and EBT3 type films.

PubMed

Dreindl, Ralf; Georg, Dietmar; Stock, Markus

2014-05-01

Gafchromic® EBT2 film is a widely used dosimetric tool for quality assurance in radiation therapy. In 2012 EBT3 was presented as a replacement for EBT2 films. The symmetric structure of EBT3 films to reduce face-up/down dependency as well as the inclusion of a matte film surface to frustrate Newton Ring artifacts present the most prominent improvements of EBT3 films. The aim of this study was to investigate the characteristics of EBT3 films, to benchmark the films against the known EBT2-features and to evaluate the dosimetric behavior over a time period greater than 6 months. All films were irradiated to clinical photon beams (6 MV, 10 MV and 18 MV) on an Elekta Synergy Linac equipped with a Beam Modulator MLC in solid water phantom slabs. Film digitalization was done with a flatbed transparency scanner (Type Epson Expression 1680 Pro). MATLAB® was used for further statistical calculations and image processing. The investigations on post-irradiation darkening, film orientation, film uniformity and energy dependency resulted in negligible differences between EBT2 and EBT3 film. A minimal improvement in face-up/down dependence was found for EBT3. The matte film surface of EBT3 films turned out to be a practical feature as Newton rings could be eliminated completely. Considering long-term behavior (> 6 months) a shift of the calibration curve for EBT2 and EBT3 films due to changes in the dynamic response of the active component was observed. In conclusion, the new EBT3 film yields comparable results to its predecessor EBT2. The general advantages of radiochromic film dosimeters are completed by high film homogeneity, low energy dependence for the observed energy range and a minimized face-up/down dependence. EBT2 dosimetry-protocols can also be used for EBT3 films, but the inclusion of periodical recalibration-interval (e.g. once a quarter) is recommended for protocols of both film generations. Copyright © 2013. Published by Elsevier GmbH.

SU-E-T-128: Dosimetric Characteristics of Gafchromic EBT3 Films for Megavoltage Photon and Proton Beams.

PubMed

Hayashi, N; Kato, H; Yada, R; Matsunaga, T; Ehara, I; Adachi, Y

2012-06-01

Gafchromic film for quantitative analysis was renewed from EBT2 to EBT3 film in November 2011. The purpose of this study is to investigate the relevant characteristics of EBT3 film for its application in dosimetric verification for IMRT/VMAT or proton therapy. We investigated the characteristics of EBT3 film with comparison of previous EBT2 film. The experiments in this study composed two categories. At first, the photo spectroscopy for the irradiated film was compared between EBT2 and EBT3. The film 1 day after the irradiation was analyzed by a photo spectrometer (SR520: JASCO Corporation, Japan). Secondly, we investigated several calibration curves which obtained by same batch. The films were calibrated by irradiation the films to 13 dose steps. The irradiated films were scanned by a flatbed scanner (ES-10000XL, Epson-Seiko Corporation, Japan). The difference on scan orientation was evaluated alternate portrait and landscape directions. The photon and proton beams were delivered from Clinac 21EX (Varian) and Mitsubishi machine, respectively. The peak absorption wavelength of EBT3 film and its response at all active range were basically same with that of EBT2 film. The peak wavelength of photo absorption in EBT3 was observed at 585 and 634 nm. The fog optical density was increased due to the hazy matte polyester for active layer. However, there is no change the tendency of the calibration curve responding to megavoltage photon and proton beams. The scan orientation dependency of EBT3 film was observed with similar to EBT2 film. The optical density of portrait orientation was 10% higher than that of landscape orientation. The dosimetric characteristics of EBT3 film were basically same with EBT2 film. With regard to the matte polyester, the creation of Newton's rings during scanning procedure was reduced. However, the suitable scan protocol should be used for accurate film dosimetry. © 2012 American Association of Physicists in Medicine.

A PARMELA model of the CEBAF injector valid over a wide range of beam parameters

DOE Office of Scientific and Technical Information (OSTI.GOV)

Yuhong Zhang; Kevin Beard; Jay Benesch

A PARMELA model of the CEBAF injector valid over a wide range of beam parameters Yuhong Zhang, Kevin Beard, Jay Benesch, Yu-Chiu Chao, Arne Freyberger, Joseph Grames, Reza Kazimi, Geoff Krafft, Rui Li, Lia Merminga, Matt Poelker, Michael Tiefenback, Byung Yunn Thomas Jefferson National Accelerator Facility 12000 Jefferson Avenue, Newport News, VA 23606 USA An earlier PARMELA model of the Jefferson Lab CEBAF photoinjector was recently revised. The initial phase space distribution of an electron bunch was determined by measuring spot size and pulselength of the driver laser and by beam emittance measurements. The improved model has been used formore » simulations of the simultaneous delivery of the Hall A beam required for a hypernuclear experiment, and the Hall C beam required for the G0 parity violation experiment.« less

tcpl: the ToxCast pipeline for high-throughput screening data.

PubMed

Filer, Dayne L; Kothiya, Parth; Setzer, R Woodrow; Judson, Richard S; Martin, Matthew T

2017-02-15

Large high-throughput screening (HTS) efforts are widely used in drug development and chemical toxicity screening. Wide use and integration of these data can benefit from an efficient, transparent and reproducible data pipeline. Summary: The tcpl R package and its associated MySQL database provide a generalized platform for efficiently storing, normalizing and dose-response modeling of large high-throughput and high-content chemical screening data. The novel dose-response modeling algorithm has been tested against millions of diverse dose-response series, and robustly fits data with outliers and cytotoxicity-related signal loss. tcpl is freely available on the Comprehensive R Archive Network under the GPL-2 license. martin.matt@epa.gov. Published by Oxford University Press 2016. This work is written by US Government employees and is in the public domain in the US.

Object extraction method for image synthesis

NASA Astrophysics Data System (ADS)

Inoue, Seiki

1991-11-01

The extraction of component objects from images is fundamentally important for image synthesis. In TV program production, one useful method is the Video-Matte technique for specifying the necessary boundary of an object. This, however, involves some manually intricate and tedious processes. A new method proposed in this paper can reduce the needed level of operator skill and simplify object extraction. The object is automatically extracted by just a simple drawing of a thick boundary line. The basic principle involves a thinning of the thick boundary line binary image using the edge intensity of the original image. This method has many practical advantages, including the simplicity of specifying an object, the high accuracy of thinned-out boundary line, its ease of application to moving images, and the lack of any need for adjustment.

The behavior of sulfur in industrial pyrometallurgical slags

NASA Astrophysics Data System (ADS)

Nagamori, Meguru

1994-08-01

Dissolution of sulfur in industrial slags, even at such a low level as 1 mass% S or so, increases the solubility of certain valuable metals by an order of magnitude. The phenomenon is accounted for in terms of Flood-Førland-Grjotheim's model for dianionic salt solutions, whereas its rigorous analysis requires the digaseous Gibbs-Duhem integration. In the research described here, the distribution of sulfur among gas, slag, and metallic iron phases in the bath smelting of iron ore was computer-simulated based on a two-sites model coupled with sulfide capacity data. The solubilities of Ag, Cu, Co, and Ni in industrial slags are reviewed by applying the sulfidic-oxidic dissolution model to copper-matte smelting, nickel-slag cleaning (Falconbridge, Canada), and the imperial smelting process for zinc and lead (Hachinohe, Japan).

Mineralogical Characterization of Copper Slag from Tongling Nonferrous Metals Group China

NASA Astrophysics Data System (ADS)

Chun, Tiejun; Ning, Chao; Long, Hongming; Li, Jiaxin; Yang, Jialong

2016-09-01

In this paper, the mineralogical characterization of typical copper slag supplied by the Tongling Nonferrous Metals Group China was performed based on x-ray fluorescence, x-ray diffraction, and scanning electron microscopy with energy dispersive spectroscopy. The results show that the dominant phases of the slag are fayalite, glassy substance and magnetite. The minor accessory phases consist of copper matte, metallic copper and other complex lead and zinc minerals. The contents of iron, copper, lead and zinc in copper slag are 40.21%, 0.79%, 0.24%, and 2.80%, respectively. The mineralogy of copper slag indicates that these valuable elements are difficult to recover by beneficiation processes due to the complicated occurrences. Instead, the pyro-metallurgical processes appear promising in recovering the valuable metals from copper slag.

Butterfly wing colours: scale beads make white pierid wings brighter.

PubMed Central

Stavenga, D. G.; Stowe, S.; Siebke, K.; Zeil, J.; Arikawa, K.

2004-01-01

The wing-scale morphologies of the pierid butterflies Pieris rapae (small white) and Delias nigrina (common jezabel), and the heliconine Heliconius melpomene are compared and related to the wing-reflectance spectra. Light scattering at the wing scales determines the wing reflectance, but when the scales contain an absorbing pigment, reflectance is suppressed in the absorption wavelength range of the pigment. The reflectance of the white wing areas of P. rapae, where the scales are studded with beads, is considerably higher than that of the white wing areas of H. melpomene, which has scales lacking beads. The beads presumably cause the distinct matt-white colour of the wings of pierids and function to increase the reflectance amplitude. This will improve the visual discrimination between conspecific males and females. PMID:15306303

Polyplanar optical display

NASA Astrophysics Data System (ADS)

Veligdan, James T.; Beiser, Leo; Biscardi, Cyrus; Brewster, Calvin; DeSanto, Leonard

1997-07-01

The polyplanar optical display (POD) is a unique display screen which can be use with any projection source. This display screen is 2 inches thick and has a matte black face which allows for high contrast images. The prototype being developed is a form, fit and functional replacement display for the B-52 aircraft which uses a monochrome ten-inch display. The new display uses a 100 milliwatt green solid state laser as its optical source. In order to produce real- time video, the laser light is being modulated by a digital light processing (DLP) chip manufactured by Texas Instruments, Inc. A variable astigmatic focusing system is used to produce a stigmatic image on the viewing face of the POD. In addition to the optical design, we discuss the electronic interfacing to the DLP chip, the opto-mechanical design and viewing angle characteristics.

Laser-driven polyplanar optic display

NASA Astrophysics Data System (ADS)

Veligdan, James T.; Beiser, Leo; Biscardi, Cyrus; Brewster, Calvin; DeSanto, Leonard

1998-05-01

The Polyplanar Optical Display (POD) is a unique display screen which can be used with any projection source. This display screen is 2 inches thick and has a matte-black face which allows for high contrast images. The prototype being developed is a form, fit and functional replacement display for the B-52 aircraft which uses a monochrome ten-inch display. The new display uses a 200 milliwatt green solid- state laser (532 nm) as its optical source. In order to produce real-time video, the laser light is being modulated by a Digital Light Processing (DLPTM) chip manufactured by Texas Instruments, Inc. A variable astigmatic focusing system is used to produce a stigmatic image on the viewing face of the POD. In addition to the optical design, we discuss the DLPTM chip, the opto-mechanical design and viewing angle characteristics.

GLOBE Hydrology Workshop SEIP program

NASA Technical Reports Server (NTRS)

2005-01-01

Matt Krigbaum (left), a teacher at Mitchell Elementary in Ann Arbor, Mich., pours water from the Pearl River into a turbidity tube to measure the river's light penetration. Krigbaum, along with Lois Williams, principal at Elizabeth Courville Elementary in Detroit, Mich.; and Carolyn Martin and Arlene Wittmer, teachers at Elizabeth Courville Elementary; conducted the experiment during a GLOBE (Global Learning and Observations to Benefit the Environment) hydrology workshop. GLOBE is a worldwide, hands-on science education program in which teachers can become certified to implement the program at their schools after taking hydrology, land cover/biology, atmosphere/climate and soil protocol workshops. Twelve teachers from across the country attended the recent weeklong GLOBE training at SSC, offered through its Educator Resource Center and the NASA Explorer Schools program. All workshops are free and offer continuing education units.

GLOBE Hydrology Workshop SEIP program

NASA Image and Video Library

2005-06-30

Matt Krigbaum (left), a teacher at Mitchell Elementary in Ann Arbor, Mich., pours water from the Pearl River into a turbidity tube to measure the river's light penetration. Krigbaum, along with Lois Williams, principal at Elizabeth Courville Elementary in Detroit, Mich.; and Carolyn Martin and Arlene Wittmer, teachers at Elizabeth Courville Elementary; conducted the experiment during a GLOBE (Global Learning and Observations to Benefit the Environment) hydrology workshop. GLOBE is a worldwide, hands-on science education program in which teachers can become certified to implement the program at their schools after taking hydrology, land cover/biology, atmosphere/climate and soil protocol workshops. Twelve teachers from across the country attended the recent weeklong GLOBE training at SSC, offered through its Educator Resource Center and the NASA Explorer Schools program. All workshops are free and offer continuing education units.

A disposable flexible humidity sensor directly printed on paper for medical applications

NASA Astrophysics Data System (ADS)

Barmpakos, D.; Segkos, A.; Tsamis, C.; Kaltsas, G.

2017-11-01

The present study demonstrates an inkjet - printed interdigitated electrode array on paper substrate and its evaluation as humidity sensor. Inkjet droplet formation analysis has been performed in order to achieve repeatable results regarding generated droplets, based on the driving pulses applied on the inkjet piezoelectric element. Droplet formation has been monitored using stroboscopic effect. Three different paper substrates, namely high glossy inkjet photo paper, glossy inkjet photo and matte inkjet photo paper have been evaluated to investigate compatibility with the ink. Relative humidity measurements have been carried out in a controlled environment. Material degradation, long term response and memory effect are some of the aspects which were studied within the frame of the present work. The proposed sensor provides the opportunity for novel biomedical applications given the flexible substrate nature and the low - cost, single - step fabrication approach.

NASA DEVELOP students

NASA Image and Video Library

2008-07-08

NASA DEVELOP students at Stennis Space Center recently held a midterm review with George Crozier, who serves as a science adviser to the team. The team also was joined by Jamie Favors of the Mobile (Ala.) County Health Department DEVELOP Team; Cheri Miller, the team's NASA adviser; and Kenton Ross, a team science adviser. Students participating in the meeting included: Lauren Childs, Jason Jones, Maddie Brozen, Matt Batina, Jenn Frey, Angie Maki and Aaron Brooks. The primary purpose of the meeting was to update Crozier on the status of the team's work for the summer 2008 term and discuss plans for the fiscal year 2009 project proposal. This included discussion of a possible project to study the effects of hurricanes on the Florida panhandle. DEVELOP is a NASA-sponsored, student-led, student-run program focused on developing projects to help communities.

The Study of Indicatrices of Space Object Coatings in a Controlled Laboratory Environment

NASA Astrophysics Data System (ADS)

Koshkin, N.; Burlak, N.; Petrov, M.; Strakhova, S.

The indicatrices of light scattering by radiation balance coatings used on space objects (SO) were determined in the laboratory experiment in a controlled condition. The laboratory device for the physical simulation of photometric observations of space objects in orbit, which was used in this case to study optical properties of coating samples, is described. The features of light reflection off plane coating samples, including multi-layer insulation (MLI) blankets, metal surfaces coated with several layers of enamel EP-140, special polyacrylate enamel AK-512 and matte finish Tp-CO-2, were determined. The indicated coatings are compound reflectors which exhibit both diffuse and specular reflections. The data obtained are to be used in the development of computer optical-geometric models of space objects or their fragments (space debris) to interpret the photometry results for real space objects.

Sweetened beverages and health: current state of scientific understandings.

PubMed

Rippe, James M; Saltzman, Edward

2013-09-01

This article summarizes the presentations from the "Sweetened Beverages and Health: Current State of Scientific Understandings" symposium held at the ASN Annual Meeting in Boston, MA on April 23, 2013. The metabolic and health effects of sugar-sweetened beverages were discussed from a variety of points of view by 5 different presenters. Dr. David Allison drew a distinction between conjecture and proof related to sweetened beverages and obesity. Dr. Richard Mattes discussed differences between solid and liquid calories. Dr. Miguel Alonso-Alonso reviewed potential contributions of functional neuroimaging, particularly as they relate to whether sugar is potentially "addictive." Dr. Kimber Stanhope discussed work related to experiments comparing fructose to glucose. Dr. James Rippe presented evidence from randomized controlled trials from his research organization showing no differences among high-fructose corn syrup, sucrose, glucose, or fructose at normal human consumption amounts.

KSC-04pd1784

NASA Image and Video Library

2004-09-14

KENNEDY SPACE CENTER, FLA. - In the RLV hangar at KSC, United Space Alliance workers Matt Carter (left) and Mike Sherman set up racks to hold equipment removed from the hurricane-ravaged Thermal Protection System Facility (TPSF). The facility, which creates the TPS tiles, blankets and all the internal thermal control systems for the Space Shuttles, is almost totally unserviceable at this time after losing approximately 35 percent of its roof due to Hurricane Frances, which blew across Central Florida Sept. 4-5. The maximum wind at the surface from Hurricane Frances was 94 mph from the northeast at 6:40 a.m. on Sunday, September 5. It was recorded at a weather tower located on the east shore of the Mosquito Lagoon near the Cape Canaveral National Seashore. The highest sustained wind at KSC was 68 mph.

Chemistry Comes Alive! Vol. 3: Abstract of Special Issue 23 on CD-ROM

NASA Astrophysics Data System (ADS)

Jacobsen, Jerrold J.; Moore, John W.

1999-09-01

Literature Cited

1. Jacobsen, J. J.; Moore, J. W. Chemistry Comes Alive! Vol. 1 [CD-ROM]; J. Chem. Educ. Software 1998, SP 18.

2. Jacobsen, J. J.; Moore, J. W. Chemistry Comes Alive! Vol. 2 [CD-ROM]; J. Chem. Educ. Software 1998, SP 21.

3. Moore, J. W.; Jacobsen, J. J.; Hunsberger, L. R.; Gammon, S. D.; Jetzer, K. H.; Zimmerman, J. ChemDemos Videodisc; J. Chem. Educ. Software 1994, SP 8.

4. Moore, J. W.; Jacobsen, J. J.; Jetzer, K. H.; Gilbert, G.; Mattes, F.; Phillips, D.; Lisensky, G.; Zweerink, G. ChemDemos II; J. Chem. Educ. Software 1996, SP 14.

5. Jacobsen, J. J.; Jetzer, K. H.; Patani, N.; Zimmerman, J. Titration Techniques Videodisc; J. Chem. Educ. Software 1995, SP9.

Mineral resources of Peru's ancient societies

USGS Publications Warehouse

Brooks, W.E.

2003-01-01

Northern Peru has an exceptionally rich archaeological heritage that includes metalwork, ceramics and textiles. The success of at least a half-dozen pre-Columbian societies dating back 3,000 years and subsequent Spanish colonization in the 1400s has rested on the effective use of northern Peru's abundant resources. In the summer of 2000, my son Matt and I learned about that connection firsthand by volunteering at the Santa Rita B archaeological site in the Chao Valley near Trujillo in northern Peru. Riding donkey-back through the Andes and talking with local people, we got our hands dirty in the rich archaeology and geology of the area. We were able to correlate mineral occurrences to their various roles in society - opening a window into the region's fascinating past. From construction to metallurgy, pre-Columbian societies flourished and advanced because of their understanding and use of the available mineral resources.

Element Distribution in the Oxygen-Rich Side-Blow Bath Smelting of a Low-Grade Bismuth-Lead Concentrate

NASA Astrophysics Data System (ADS)

Yang, Tianzu; Xiao, Hui; Chen, Lin; Chen, Wei; Liu, Weifeng; Zhang, Duchao

2018-03-01

Oxygen-rich side-blow bath smelting (OSBS) technology offers an efficient method for processing complex bismuth-lead concentrates; however, the element distributions in the process remain unclear. This work determined the distributions of elements, i.e., bismuth, lead, silver, copper, arsenic and antimony, in an industrial-scale OSBS process. The feed, oxidized slag and final products were collected from the respective sampling points and analyzed. For the oxidative smelting process, 65% of bismuth and 76% of silver in the concentrate report to the metal alloy, whereas less lead reports to the metal ( 31%) than the oxidized slag ( 44%). Approximately 50% of copper enters the matte, while more than 63% of arsenic and antimony report to the slag. For the reductive smelting process, less than 4.5% of bismuth, lead, silver and copper in the oxidized slag enter the reduced slag, indicating high recoveries of these metal values.

Structurally coloured secondary particles composed of black and white colloidal particles.

PubMed

Takeoka, Yukikazu; Yoshioka, Shinya; Teshima, Midori; Takano, Atsushi; Harun-Ur-Rashid, Mohammad; Seki, Takahiro

2013-01-01

This study investigated the colourful secondary particles formed by controlling the aggregation states of colloidal silica particles and the enhancement of the structural colouration of the secondary particles caused by adding black particles. We obtained glossy, partially structurally coloured secondary particles in the absence of NaCl, but matte, whitish secondary particles were obtained in the presence of NaCl. When a small amount of carbon black was incorporated into both types of secondary particles, the incoherent multiple scattering of light from the amorphous region was considerably reduced. However, the peak intensities in the reflection spectra, caused by Bragg reflection and by coherent single wavelength scattering, were only slightly decreased. Consequently, a brighter structural colour of these secondary particles was observed with the naked eye. Furthermore, when magnetite was added as a black particle, the coloured secondary particles could be moved and collected by applying an external magnetic field.

Laser-driven polyplanar optic display

DOE Office of Scientific and Technical Information (OSTI.GOV)

Veligdan, J.T.; Biscardi, C.; Brewster, C.

1998-01-01

The Polyplanar Optical Display (POD) is a unique display screen which can be used with any projection source. This display screen is 2 inches thick and has a matte-black face which allows for high contrast images. The prototype being developed is a form, fit and functional replacement display for the B-52 aircraft which uses a monochrome ten-inch display. The new display uses a 200 milliwatt green solid-state laser (532 nm) as its optical source. In order to produce real-time video, the laser light is being modulated by a Digital Light Processing (DLP) chip manufactured by Texas Instruments, Inc. A variablemore » astigmatic focusing system is used to produce a stigmatic image on the viewing face of the POD. In addition to the optical design, the authors discuss the DLP chip, the optomechanical design and viewing angle characteristics.« less

KSC-02pd1265

NASA Image and Video Library

2002-08-28

KENNEDY SPACE CENTER, FLA. - During the master plan signing ceremony at Port Canaveral Terminal 10, Matt Taylor gives a presentation to attendees, who included Canaveral National Seashore Superintendent Robert Newkirk, Canaveral Port Authority Executive Director Malcolm "Mac" McLouth, KSC Director Roy Bridges Jr., U.S. Rep. Dave Weldon, 45th Space Wing Commander Gregory Pavlovich, U.S. Fish & Wildlife Services Refuge Manager Ron Hight, Naval Ordnance Test Unit Commanding Officer William Borger, and Florida Space Authority Executive Director Ed Gormel. Taylor is vice president and chief planning officer of ZHA, Inc., which provided consulting services for the plan. The plan represents interagency cooperation between the leadership group's agencies and the U.S. Fish and Wildlife Service, the National Park Service and U.S. Navy. Joining them in developing a vision of the Spaceport's future have been aerospace educators, researchers, and businesses, along with representatives from local, state and national government.

Element Distribution in the Oxygen-Rich Side-Blow Bath Smelting of a Low-Grade Bismuth-Lead Concentrate

NASA Astrophysics Data System (ADS)

Yang, Tianzu; Xiao, Hui; Chen, Lin; Chen, Wei; Liu, Weifeng; Zhang, Duchao

2018-06-01

Oxygen-rich side-blow bath smelting (OSBS) technology offers an efficient method for processing complex bismuth-lead concentrates; however, the element distributions in the process remain unclear. This work determined the distributions of elements, i.e., bismuth, lead, silver, copper, arsenic and antimony, in an industrial-scale OSBS process. The feed, oxidized slag and final products were collected from the respective sampling points and analyzed. For the oxidative smelting process, 65% of bismuth and 76% of silver in the concentrate report to the metal alloy, whereas less lead reports to the metal ( 31%) than the oxidized slag ( 44%). Approximately 50% of copper enters the matte, while more than 63% of arsenic and antimony report to the slag. For the reductive smelting process, less than 4.5% of bismuth, lead, silver and copper in the oxidized slag enter the reduced slag, indicating high recoveries of these metal values.

Efficient Removal of Arsenic and Antimony During Blast Furnace Smelting of Lead-Containing Materials

NASA Astrophysics Data System (ADS)

Dosmukhamedov, Nurlan; Kaplan, Valery

2017-02-01

The efficient removal of impurities, As and Sb, from recycled lead-containing materials is a key issue in the selection of the appropriate smelting technology for projects involving metal reuse. Volatilization of impurities such as As and Sb should occur as early as possible in the process, and preferably within the smelting furnace, so that they do not contaminate the industrial environment nor interfere with the operation of downstream equipment. Using of copper-zinc concentrates in the blast furnace process for recycling lead-containing materials achieves: (1) high copper extraction to matte; (2) high lead extraction to lead bullion; and (3) high zinc extraction to slag, while at the same time producing a more efficient volatilization of As and Sb. Based on both laboratory and industrial data and thermodynamic considerations, the advantages of this blast furnace process for the treatment of recycled lead-containing materials are discussed.

Structurally Coloured Secondary Particles Composed of Black and White Colloidal Particles

PubMed Central

Takeoka, Yukikazu; Yoshioka, Shinya; Teshima, Midori; Takano, Atsushi; Harun-Ur-Rashid, Mohammad; Seki, Takahiro

2013-01-01

This study investigated the colourful secondary particles formed by controlling the aggregation states of colloidal silica particles and the enhancement of the structural colouration of the secondary particles caused by adding black particles. We obtained glossy, partially structurally coloured secondary particles in the absence of NaCl, but matte, whitish secondary particles were obtained in the presence of NaCl. When a small amount of carbon black was incorporated into both types of secondary particles, the incoherent multiple scattering of light from the amorphous region was considerably reduced. However, the peak intensities in the reflection spectra, caused by Bragg reflection and by coherent single wavelength scattering, were only slightly decreased. Consequently, a brighter structural colour of these secondary particles was observed with the naked eye. Furthermore, when magnetite was added as a black particle, the coloured secondary particles could be moved and collected by applying an external magnetic field. PMID:23917891

Moderate Dilution of Copper Slag by Natural Gas

NASA Astrophysics Data System (ADS)

Zhang, Bao-jing; Zhang, Ting-an; Niu, Li-ping; Liu, Nan-song; Dou, Zhi-he; Li, Zhi-qiang

2018-01-01

To enable use of copper slag and extract the maximum value from the contained copper, an innovative method of reducing moderately diluted slag to smelt copper-containing antibacterial stainless steel is proposed. This work focused on moderate dilution of copper slag using natural gas. The thermodynamics of copper slag dilution and ternary phase diagrams of the slag system were calculated. The effects of blowing time, temperature, matte settling time, and calcium oxide addition were investigated. The optimum reaction conditions were identified to be blowing time of 20 min, reaction temperature of 1250°C, settling time of 60 min, CaO addition of 4% of mass of slag, natural gas flow rate of 80 mL/min, and outlet pressure of 0.1 MPa. Under these conditions, the Fe3O4 and copper contents of the residue were 7.36% and 0.50%, respectively.

Reflected Sunlight Reduction and Characterization for a Deep-Space Optical Receiver Antenna (DSORA)

NASA Technical Reports Server (NTRS)

Clymer, B. D.

1990-01-01

A baffle system for the elimination of first-order specular and diffuse reflection of sunlight from the sunshade of a deep-space optical receiver telescope is presented. This baffle system consists of rings of 0.5cm blades spaced 2.5 cm apart on the walls of GO hexagonal sunshade tubes that combine to form the telescope sunshade. The shadow cast by the blades, walls, and rims of the tubes prevent all first-order reflections of direct sunlight from reaching the primary mirror of the telescope. A reflection model of the sunshade without baffles is also presented for comparison. Since manufacturers of absorbing surfaces do not measure data near grazing incidence, the reflection properties at anticipated angles of incidence must be characterized. A description of reflection from matte surfaces in term of bidirectional reflection distribution function (BRDF) is presented along with a discussion of measuring BRDF near grazing incidence.

Kinetics of Ni3S2 sulfide dissolution in solutions of sulfuric and hydrochloric acids

NASA Astrophysics Data System (ADS)

Palant, A. A.; Bryukvin, V. A.; Vinetskaya, T. N.; Makarenkova, T. A.

2008-02-01

The kinetics of Ni3S2 sulfide (heazlewoodite) dissolution in solutions of hydrochloric and sulfuric acids is studied. The process under study in the temperature range of 30 90°C is found to occur in a kinetic regime and is controlled by the corresponding chemical reactions of the Ni3S2 decomposition by solutions of inorganic acids ( E a = 67 92 kJ/mol, or 16 22 kcal/mol). The only exception is the Ni3S2-HCl system at elevated temperatures (60 90°C). In this case, the apparent activation energy decreases sharply to 8.8 kJ/mol (2.1 kcal/mol), which is explained by the catalytic effect of gaseous chlorine formed under these conditions. The studies performed are related to the physicochemical substantiation of the hydrometallurgical processing of the copper-nickel converter mattes produced in the industrial cycle of the Norilsk Mining Company.

Preparing for Harvesting Radioisotopes from FRIB

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lapi, Suzanne

2015-11-30

In the second quarter of this grant, work has progressed smoothly at all three collaborating institutions. We have recently completed our first experiment at the NSCL under this grant successfully, where 79Kr was collected by cryotrapping from our water target apparatus. The three PI’s, one undergraduate (Boone Marois), two graduate students (Stacy Queern and Matt Scott) and one post-doc (Aranh Pen) were assisted by Dave Morrissey at the NSCL to perform this experiment. The experiment also provided the opportunity for a collaboration meeting of the PI’s to discuss future work on this proposal. Significant progress has been made on bothmore » novel radiochemical separations technology at the University of Missouri, and validating a radiochemical separation procedure for 48V at Washington University. The only change in the work-scope of the original proposal is the transition of the Washington University PI to the University of Alabama at Birmingham.« less

Polyplanar optic display for cockpit application

DOE Office of Scientific and Technical Information (OSTI.GOV)

Veligdan, J.; Biscardi, C.; Brewster, C.

1998-04-01

The Polyplanar Optical Display (POD) is a high contrast display screen being developed for cockpit applications. This display screen is 2 inches thick and has a matte black face which allows for high contrast images. The prototype being developed is a form, fit and functional replacement display for the B-52 aircraft which uses a monochrome ten-inch display. The new display uses a long lifetime, (10,000 hour), 200 mW green solid-state laser (532 nm) as its optical source. In order to produce real-time video, the laser light is being modulated by a Digital Light Processing (DLP{trademark}) chip manufactured by Texas Instruments,more » Inc. A variable astigmatic focusing system is used to produce a stigmatic image on the viewing face of the POD. In addition to the optical design and speckle reduction, the authors discuss the electronic interfacing to the DLP{trademark} chip, the opto-mechanical design and viewing angle characteristics.« less

Polyplanar optic display

DOE Office of Scientific and Technical Information (OSTI.GOV)

Veligdan, J.; Biscardi, C.; Brewster, C.

1997-07-01

The Polyplanar Optical Display (POD) is a unique display screen which can be used with any projection source. This display screen is 2 inches thick and has a matte black face which allows for high contrast images. The prototype being developed is a form, fit and functional replacement display for the B-52 aircraft which uses a monochrome ten-inch display. The new display uses a 100 milliwatt green solid state laser (532 nm) as its optical source. In order to produce real-time video, the laser light is being modulated by a Digital Light Processing (DLP{trademark}) chip manufactured by Texas Instruments, Inc.more » A variable astigmatic focusing system is used to produce a stigmatic image on the viewing face of the POD. In addition to the optical design, the authors discuss the electronic interfacing to the DLP{trademark} chip, the opto-mechanical design and viewing angle characteristics.« less

Polyplanar optic display for cockpit application

NASA Astrophysics Data System (ADS)

Veligdan, James T.; Biscardi, Cyrus; Brewster, Calvin; DeSanto, Leonard; Freibott, William C.

1998-09-01

The Polyplanar Optical Display (POD) is a high contrast display screen being developed for cockpit applications. This display screen is 2 inches thick and has a matte black face which allows for high contrast images. The prototype being developed is a form, fit and functional replacement display for the B-52 aircraft which uses a monochrome ten-inch display. The new display uses a long lifetime, (10,000 hour), 200 mW green solid-state laser (532 nm) as its optical source. In order to produce real-time video, the laser light is being modulated by a Digital Light Processing (DLPTM) chip manufactured by Texas Instruments, Inc. A variable astigmatic focusing system is used to produce a stigmatic image on the viewing face of the POD. In addition to the optical design and speckle reduction, we discuss the electronic interfacing to the DLPTM chip, the opto-mechanical design and viewing angle characteristics.

Pilot ejection, parachute, and helicopter crash injuries.

PubMed

McBratney, Colleen M; Rush, Stephen; Kharod, Chetan U

2014-01-01

USAF Pararescuemen (PJs) respond to downed aircrew as a fundamental mission for personnel recovery (PR), one of the Air Force's core functions. In addition to responding to these in Military settings, the PJs from the 212 Rescue Squadron routinely respond to small plane crashes in remote regions of Alaska. While there is a paucity of information on the latter, there have been articles detailing injuries sustained from helicopter crashes and while ejecting or parachuting from fixed wing aircraft. The following represents a new chapter added to the Pararescue Medical Operations Handbook, Sixth Edition (2014, editors Matt Wolf, MD, and Stephen Rush, MD, in press). It was designed to be a quick reference for PJs and their Special Operations flight surgeons to help with understanding of mechanism of injury with regard to pilot ejection, parachute, and helicopter accident injuries. It outlines the nature of the injuries sustained in such mishaps and provides an epidemiologic framework from which to approach the problem. 2014.

KSC-2012-2048

NASA Image and Video Library

2012-04-12

CAPE CANAVERAL, Fla. - In the Debus Conference Center of the Kennedy Space Center Visitor Complex, winners of the NASA OPTIMUS PRIME Spinoff Video Contest receive awards from Joyce Ward, the United States Patent and Trademark Office's education coordinator/administrator, left Ansel Brown, country music singer and song writer of "When You Fly" Sarah Carroll, brand manager of TRANSFORMERS for Hasbro Inc. Peter Cullen, the voice of OPTIMUS PRIME from the "Transformers" franchise Matt Schatzle, executive director of the American Society of Mechanical Engineers Foundation Nona Cheeks, chief of the Technology Commercialization Office at NASA's Goddard Space Flight Center in Greenbelt, Md. and Darryl Mitchell, NASA's project manager for the video contest. The contest challenged students in grades three through 12 to study NASA spinoff technologies and produce short, creative videos promoting their favorites. Goddard's Innovative Partnerships Office designed the contest to help students see the benefits of NASA technology here on Earth. NASA collaborated with Hasbro in using the OPTIMUS PRIME character. Photo credit: NASA/Jim Grossmann

Through the eye of the needle: the unfolding of the unconscious body.

PubMed

Lombardi, Riccardo

2009-02-01

The body is the starting point of experience and the original source of psychic life. In the course of analysis "the camel" must "go through the eye of the needle," in the sense that the body must become the specific object of mental working through, although no link between the corporeal and the mental can be taken for granted. The body-mind relationship is explored in the light of Matte Blanco's hypothesis that symmetric and asymmetric relationships are always present in the mind in differing proportions, and that the realm of symmetry is the deep unconscious. In primitive mental states the body may be completely unperceived: just as H. G. Wells's invisible man could be seen only when dressed, so the body appears on the mind's horizon only when asymmetric thought is directed at it. Three clinical vignettes show the contribution of the body-mind relationship to the overcoming of serious impasses in analysis.

Enzymatic hydrolysis of pretreated waste paper--source of raw material for production of liquid biofuels.

PubMed

Brummer, Vladimir; Jurena, Tomas; Hlavacek, Viliam; Omelkova, Jirina; Bebar, Ladislav; Gabriel, Petr; Stehlik, Petr

2014-01-01

Enzymatic hydrolysis of waste paper is becoming a perspective way to obtain raw material for production of liquid biofuels. Reducing sugars solutions that arise from the process of saccharification are a precursors for following or simultaneous fermentation to ethanol. Different types of waste paper were evaluated, in terms of composition and usability, in order to select the appropriate type of the waste paper for the enzymatic hydrolysis process. Novozymes® enzymes NS50013 and NS50010 were used in a laboratory scale trials. Technological conditions, which seem to be the most suitable for hydrolysis after testing on cellulose pulp and filter paper, were applied to hydrolysis of widely available waste papers - offset paper, cardboard, recycled paper in two qualities, matte MYsol offset paper and for comparison again on model materials. The highest yields were achieved for the cardboard, which was further tested using various pretreatment combinations in purpose of increasing the hydrolysis yields. Copyright © 2013 Elsevier Ltd. All rights reserved.

Laser Based Color Film Recorder System With GaAs Microlaser

NASA Astrophysics Data System (ADS)

Difrancesco, David J.

1989-07-01

In 1984 Pixar's research and development group built and applied to the motion-picture arts at Lucasfilm's ILM facility a three color laser based film scanner/recorder system. The digital film printer is capable of reading and writing 35mm film formats on a variety of film stocks. The system has been used in award-winning special-effects work, and has been operated in a normal production environment since that time. The primary objective was to develop a full color high resolution system, free from scan artifacts, enabling traditionally photographed motion-picture film to be inter-cut with digital raster image photography. Its use is applied to the art of blue-screen traveling-matte cinematography for motion pic-ture special effects. The system was designed using the Pixar Image Computer and conventional gas laser technology as the illumination source. This paper will discuss recent experimental work in the application of GaAs microlaser technology to a digital film printing system of the future.

The gap between: being and knowing in Zen Buddhism and psychoanalysis.

PubMed

Cooper, P C

2001-12-01

The author discusses various relationships derived from the image of gap, precipice, and abyss with specific emphasis on interacting dynamics between being and knowing as explicated in the Zen Buddhist teachings of Hui-neng and in the psychoanalytic writings of Wilfred Bion. While of significant value to psychoanalysis, it is argued that symbolic meanings can occlude the actuality of the analysand's or of the spiritual seeker's affective experiencing, particularly concerning the human tendency to concretize experiential states engendered through meditation and/or the psychoanalytic encounter. The author draws from Matte-Blanco's explication of symmetrical and asymmetrical perceptual modalities to discuss the fluid nature of spiritual experiencing, paradoxical coexistence of ultimate and relative realities and reciprocal dynamics and identities between states of experiencing that might otherwise appear opposed. The primacy of experiencing for both disciplines, particularly concerning the experiencing subject's momentary state of consciousness, forms a central theme for both Zen and psychoanalysis. Brief clinical vignettes support and illuminate the author's points.

Supervising the uncanny: the play within the play.

PubMed

Leader, Carol

2015-11-01

The writer offers a combined experience in analysis and the performing arts to explore uncanny aspects of the unconscious subtext of the patient's inner drama; subtext which can remain hidden from view in supervision. Freud and Jung's understanding of uncanny experience is considered together with a painting from medieval alchemy and Matte Blanco's conceptions concerning the symmetrical nature of unconscious process. Theatre and the work of the theatre director and actor in approaching the multidimensional aspects of a play are then introduced. Finally clinical case material from group supervision demonstrates how the 'theatre of therapy' and the work of the supervisory couple and group promote the emergence of a more authentic conscious asymmetrical response to the patient's 'script' that can break the 'spell' of the transference/countertransference relationship. This in turn brings meaning to the underlying and implicit 'stage directions' that the patient has been unconsciously communicating. © 2015, The Society of Analytical Psychology.

Axial and radial water flow in the trunks of oak trees: a quantitative and qualitative analysis.

PubMed

Granier, A; Anfodillo, T; Sabatti, M; Cochard, H; Dreyer, E; Tomasi, M; Valentini, R; Bréda, N

1994-12-01

Axial water flow in the trunks of mature oak trees (Quercus petraea (Matt.) Liebl. and Q. robur L.) was studied by four independent techniques: water absorption from a cut trunk, sap flowmeters, heat pulse velocity (HPV) and thermoimaging. Estimation of the total water flow with sap flowmeters, HPV and water absorption yielded comparable results. We concluded from dye colorations, thermograms and axial profiles of sap flow and heat pulse velocity that, in intact trunks, most of the flow occurred in the current-year ring, where early-wood vessels in the outermost ring were still functional. Nevertheless, there was significant flow in the older rings of the xylem. Total water flow through the trunk was only slightly reduced when air embolisms were artificially induced in early-wood vessels, probably because there was little change in hydraulic conductance in the root-leaf sap pathway. Embolization of the current-year vessels reactivated transport in the older rings.

Nocturnal motor activity in fibromyalgia patients with poor sleep quality.

PubMed

Hyyppä, M T; Kronholm, E

1995-01-01

Nocturnal motor activity was examined in long-term rehabilitation patients complaining of poor sleep and having fibromyalgia syndrome (N = 24) or other musculoskeletal disorders (N = 60) and compared with that in 91 healthy controls drawn from a random community sample. Self-reports on sleep complaints and habits were collected. The frequency of nocturnal body movements, the "apnoea" index and ratio of "quiet sleep" to total time in bed were measured using the Static Charge Sensitive Bed (SCSB) (BioMatt). As a group, patients with fibromyalgia syndrome did not differ from patients with other musculoskeletal disorders or from healthy controls in their nocturnal motor activity. The "apnoea" index was a little higher in the fibromyalgia group than in the healthy control group but did not differ from that of the group of other musculoskeletal patients. Further multivariate analyses adjusted for age, BMI, medication and "apnoea" index did not support the assumption that an increased nocturnal motor activity characterizes patients with fibromyalgia syndrome.

Integrative interactive visualization of crystal structure, band structure, and Brillouin zone

NASA Astrophysics Data System (ADS)

Hanson, Robert; Hinke, Ben; van Koevering, Matthew; Oses, Corey; Toher, Cormac; Hicks, David; Gossett, Eric; Plata Ramos, Jose; Curtarolo, Stefano; Aflow Collaboration

The AFLOW library is an open-access database for high throughput ab-initio calculations that serves as a resource for the dissemination of computational results in the area of materials science. Our project aims to create an interactive web-based visualization of any structure in the AFLOW database that has associate band structure data in a way that allows novel simultaneous exploration of the crystal structure, band structure, and Brillouin zone. Interactivity is obtained using two synchronized JSmol implementations, one for the crystal structure and one for the Brillouin zone, along with a D3-based band-structure diagram produced on the fly from data obtained from the AFLOW database. The current website portal (http://aflowlib.mems.duke.edu/users/jmolers/matt/website) allows interactive access and visualization of crystal structure, Brillouin zone and band structure for more than 55,000 inorganic crystal structures. This work was supported by the US Navy Office of Naval Research through a Broad Area Announcement administered by Duke University.

WhitebalPR: automatic white balance by polarized reflections

NASA Astrophysics Data System (ADS)

Fischer, Gregor; Kolbe, Karin; Sajjaa, Matthias

2008-02-01

This new color constancy method is based on the polarization degree of that light which is reflected at the surface of an object. The subtraction of at least two images taken under different polarization directions detects the polarization degree of the neutrally reflected portions and eliminates the remitted non-polarized colored portions. Two experiments have been designed to clarify the performance of the procedure, one to multicolored objects and another to objects of different surface characteristics. The results show that the mechanism of eliminating the remitted, non-polarized colored portions of light works very fine. Independent from its color, different color pigments seem to be suitable for measuring the color of the illumination. The intensity and also the polarization degree of the reflected light depend on the surface properties significantly. The results exhibit a high accuracy of measuring the color of the illumination for glossy and matt surfaces. Only strongly scattering surfaces account for a weak signal level of the difference image and a reduced accuracy. An embodiment is proposed to integrate the new method into digital cameras.

From Spintronics to CFD/ContractForDifferences

NASA Astrophysics Data System (ADS)

Maksoed, W. H.

2015-11-01

Involve the CFD/Computational Fluid Dynamics & HCCI/Homogeneous Charge Compression Ignition - Marcine Frackowiak, dissertation, 2009, for CFD/Contract For Differences accompanied by ``One Man's Crusade to Exonerate Hydrogen for Hindenburg Disaster'' of Addison BAIN, APS News, v. 9, n.7 (July 2000) concludes ``ignition of the blaze'' are responsible to those May, 1937 Accidents. Spintronics their selves include active control & manipulation of spin degree of freedom ever denotes: the nano-obelisk of scanning electron microscopy of galliumnitride/GaN nanostructures-Yong-Hon Cho et al.:``Novel Photonic Device using core-shell nanostructures'', SPIE-newsroom,10.1117/2.1201503.005864. Herewith commercial activated carbon/C can be imaged directly using abberation-corrected transmission electron microscopy[PJF Harris et al.: ``Imaging the Atomic Structures of activated C'', J. Phys. Condens. Matt, 20 (2008) in fig b & c- images networks of hexagonal rings can be clearly be seen depicts equal etchings of 340 px Akhenaten, Nefertiti & their childrens. Incredible acknowledgments to Minister of Education & Culture RI 1998-1999 HE. Mr. Prof. Ir. WIRANTO ARISMUNANDAR, MSME.

Performance of painted plywood and cloth Nzi traps relative to Manitoba and greenhead traps for tabanids and stable flies.

PubMed

Mihok, Steve; Carlson, David A

2007-04-01

Experiments were conducted to adapt the cloth Nzi trap to a format suitable for fixed applications in biting fly sampling or control. Catches of tabanids [Tabanus L., Chrysops (Meigen), and Hybomitra Enderlein], and stable flies [Stomoxys calcitrans (L.)] in painted plywood traps were compared with those in standard phthalogen blue cloth traps, and in similarly painted cloth traps. The Manitoba horse fly trap and the Tabanus nigrovittatus Macquart "greenhead" box trap were used as additional standards during one tabanid season. Shiny features of traps reduced catches, e.g., paint on cloth instead of wood, or use of aluminum screening instead of netting. Nevertheless, appropriately painted plywood Nzi traps caught as many biting flies as did standard cloth Nzi traps, if paint finishes were matte, and with the use of phthalogen blue colorants. Nzi traps collected about the same tabanid fauna as the Manitoba and T. nigrovittatus traps, but with improved catches of Chrysops and Tabanus. Recommendations are provided on appropriate color matching, and selection of readily-available materials for trap construction.

Micro Dot Patterning on the Light Guide Panel Using Powder Blasting.

PubMed

Jang, Ho Su; Cho, Myeong Woo; Park, Dong Sam

2008-02-08

This study is to develop a micromachining technology for a light guidepanel(LGP) mold, whereby micro dot patterns are formed on a LGP surface by a singleinjection process instead of existing screen printing processes. The micro powder blastingtechnique is applied to form micro dot patterns on the LGP mold surface. The optimalconditions for masking, laminating, exposure, and developing processes to form the microdot patterns are first experimentally investigated. A LGP mold with masked micro patternsis then machined using the micro powder blasting method and the machinability of themicro dot patterns is verified. A prototype LGP is test- injected using the developed LGPmold and a shape analysis of the patterns and performance testing of the injected LGP arecarried out. As an additional approach, matte finishing, a special surface treatment method,is applied to the mold surface to improve the light diffusion characteristics, uniformity andbrightness of the LGP. The results of this study show that the applied powder blastingmethod can be successfully used to manufacture LGPs with micro patterns by just singleinjection using the developed mold and thereby replace existing screen printing methods.

KSC-99pc0177

NASA Image and Video Library

1999-02-09

Members of the STS-93 crew look over the Space Shuttle Columbia's main engine in the Space Shuttle Main Engine Facility as they listen to Al Strainer, with United Space Alliance. From left, the crew members are Mission Specialist Michel Tognini of France, who represents the Centre National d'Etudes Spatiales (CNES), Pilot Jeffrey S. Ashby, Mission Specialist Steven A. Hawley, and Commander Eileen Collins. At the far right is Matt Gaetjens, with the Vehicle Integration Test Team. The fifth crew member (not shown) is Mission Specialist Catherine G. Coleman. STS-93, scheduled to launch July 9, has the primary mission of the deployment of the Chandra X-ray Observatory. Formerly called the Advanced X-ray Astrophysics Facility, Chandra comprises three major elements: the spacecraft, the science instrument module (SIM), and the world's most powerful X-ray telescope. Chandra will allow scientists from around the world to see previously invisible black holes and high-temperature gas clouds, giving the observatory the potential to rewrite the books on the structure and evolution of our universe

Determination of fluspirilene in human plasma by liquid chromatography-tandem mass spectrometry with electrospray ionisation.

PubMed

Swart, K J; Sutherland, F C; van Essen, G H; Hundt, H K; Hundt, A F

1998-12-18

An ultra-sensitive method for the determination of fluspirilene in plasma was established, using high-performance liquid chromatographic separation with tandem mass spectrometric detection. The samples were extracted with hexane/isoamyl alcohol, separated on a Phenomenex Luna C18 5 mu 150 x 2.1 mm column with a mobile phase consisting of methanol-water-acetic acid (600:400:1) at a flow-rate of 0.3 ml/min. Detection was achieved by a Finnigan Matt mass spectrometer (LCQ) at unit resolution in full scan mode scanning the product ion spectrum from m/z 130-500 and monitoring the transition of the protonated molecular ion at m/z 476.2, to the sum of the largest product ions m/z 371, 342 and 274 (MS-MS). Electrospray ionisation was used for ion production. The mean recovery for fluspirilene was 90% with a lower limit of quantification of 21.50 pg/ml using 1 ml plasma for extraction. This is the first chromatographic method described for the determination of fluspirilene in plasma that is accurate and sensitive enough to be used in pharmacokinetic studies.

An Improved Process for Precipitating Cyanide Ions from the Barren Solution at Different pHs

NASA Astrophysics Data System (ADS)

Figueroa, Gabriela V.; Parga, José R.; Valenzuela, Jesus L.; Vázquez, Victor; Valenzuela, Alejandro; Rodriguez, Mario

2016-02-01

In recent decades, the use of metal sulfides instead of hydroxide precipitation in hydrometallurgical processes has gained prominence. Some arguments for its preferential use are as follows: a high degree of metal removal at relatively low pH values, the sparingly soluble nature of sulfide precipitates, favorable dewatering characteristics, and the stability of the formed metal sulfides. The Merrill-Crowe zinc-precipitation process has been applied worldwide in a large number of operations for the recovery of gold and silver from cyanide solutions. However, in some larger plants, the quality of this precious precipitate is low because copper, zinc and especially lead are precipitated along with gold and silver. This results in higher consumption of zinc dust and flux during the smelting of the precipitate, the formation of the matte, and a shorter crucible life. The results show that pH has a significant effect on the removal efficiency of zinc and copper cyanide ions. The optimal pH range was determined to be 3-4, and the removal efficiency of zinc and copper cyanide ions was up to 99%.

Legal protection is not enough: Posidonia oceanica meadows in marine protected areas are not healthier than those in unprotected areas of the northwest Mediterranean Sea.

PubMed

Montefalcone, Monica; Albertelli, Giancarlo; Morri, Carla; Parravicini, Valeriano; Bianchi, Carlo Nike

2009-04-01

Using the Conservation Index, which measures the proportional amount of dead matte relative to live Posidonia oceanica, we assessed the health of 15 P. oceanica meadows at a regional scale along the coast of Liguria (NW Mediterranean). These areas were characterized by different degrees of anthropization, from highly urbanized sites to marine protected areas. Two different scenarios were identified according to depth: in shallow zones, the health of P. oceanica meadows was related to the degree of anthropization along the coastline. In contrast, in deep zones, most meadows exhibited poor health, independent of both the degree of disturbance and the legal measures protecting the area. Working synergistically with the regional impact of increased water turbidity, local impacts from the coast were recognized as the main causes of the severe regression of most Ligurian P. oceanica meadows. We conclude that marine protected areas alone are not sufficient to guarantee the protection of P. oceanica meadows. We emphasize the need for a management network involving the Sites of Community Interest (SCIs) containing P. oceanica meadows.

Recovery of Silver and Gold from Copper Anode Slimes

NASA Astrophysics Data System (ADS)

Chen, Ailiang; Peng, Zhiwei; Hwang, Jiann-Yang; Ma, Yutian; Liu, Xuheng; Chen, Xingyu

2015-02-01

Copper anode slimes, produced from copper electrolytic refining, are important industrial by-products containing several valuable metals, particularly silver and gold. This article provides a comprehensive overview of the development of the extraction processes for recovering silver and gold from conventional copper anode slimes. Existing processes, namely pyrometallurgical processes, hydrometallurgical processes, and hybrid processes involving the combination of pyrometallurgical and hydrometallurgical technologies, are discussed based in part on a review of the form and characteristics of silver and gold in copper anode slimes. The recovery of silver and gold in pyrometallurgical processes is influenced in part by the slag and matte/metal chemistry and related characteristics, whereas the extraction of these metals in hydrometallurgical processes depends on the leaching reagents used to break the structure of the silver- and gold-bearing phases, such as selenides. By taking advantage of both pyrometallurgical and hydrometallurgical techniques, high extraction yields of silver and gold can be obtained using such combined approaches that appear promising for efficient extraction of silver and gold from copper anode slimes.

The Search for Life Beyond Earth

NASA Image and Video Library

2014-07-14

Panelists (from left) Ellen Stofan, NASA Chief Scientist, left; John Grunsfeld, Associate Administrator for NASA's Science Mission DIrectorate, second from left; John Mather, Nobel Laureate and Senior Project Scientist for the James Webb Space Telescope (JWST) at NASA's Goddard Space Flight Center, third from left; Sara Seager, MacArthur Fellow and Professor of Planetary Science and Physics at the Massachusetts Institute of Technology, third from right; Dave Gallagher, Director for Astronomy and Physics at NASA's Jet Propulsion Laboratory, second from right; and Matt Mountain, Director of the Space Telescope Science Institute and Telescope Scientist for the JWST, right; are seen during a panel discussion on the search for life beyond Earth in the James E. Webb Auditorium at NASA Headquarters on Monday, July 14, 2014 in Washington, DC. The panel discussed how NASA's space-based observatories are making new discoveries and how the agency's new telescope, the James Webb Space Telescope, will continue this path of discovery after its schedule launch in 2018. Photo Credit: (NASA/Joel Kowsky)

Numerical Studies of Disordered Tight-Binding Hamiltonians

NASA Astrophysics Data System (ADS)

Scalettar, R. T.

2007-06-01

These are notes used for a set of lectures delivered at the Vietri summer school on Condensed Matter Physics in Fall 2006. They concern the general problem of the interplay of interactions and disorder in two dimensional electronic systems, as realized in the specific context of Quantum Monte Carlo simulations of the Anderson-Hubbard Hamiltonian. I wish to thank the organizers of this school for their hospitality during my visit, and their work in general in providing this educational opportunity for students over the years. It is a pleasure also to acknowledge the collaborators together with whom I have learned much of the physics and numerics presented in these notes: Zhaojun Bai, Andrew Baldwin, George Batrouni, Karim Bouadim, Wenbin Chen, Peter Denteneer, Fred Hébert, Norman Paris, Matt Schram, Nandini Trivedi, Martin Ulmke, Ichitaro Yamazaki and Gergely Zimanyi. This work was supported by the National Science Foundation (NSF-DMR-0312261 and NSF-ITR-0313390), and China Special Funds for Major State Basic Research Projects under contract 2005CB321700.

Non-local Lateral electron heat transport from one or more hot spots.

NASA Astrophysics Data System (ADS)

Matte, Jean-Pierre; Alouani-Bibi, Fathallah

2000-10-01

Fokker-Planck simulations of collisional absorption and transport in long scale length, preformed, underdense plasmas heated by intense and narrow laser hot spots, as in certain recent LANL experiments [1], are presented. The temperature profiles compared with those obtained from flux limited or delocalized heat flow models. For the former, the temperature peaks can be matched only if a very low flux limiter is used, and even then, the scale length of the temperature profile is always overestimated. The electron distribution function will be characterized, and compared to the "DLM" shape, exp(-(v/u)^m), [2] and the best fit for m will be compared to older formulas for uniform plasmas [2]. Hydrodynamic effects are also addressed with simulations which include ion motion; both with and without the ponderomotive force. The enhancement of sound velocity due to the "DLM" shape [3] inside the hot spot will be quantified. [1] J.A. Cobble et al., Phys. Plasmas, 7, 323 (2000) [2] J.P. Matte et al., Plasma Phys. and Contr. Fusion, 30, 1665, (1988) [3] B. B. Afeyan et al., PRL 81, 2322 (1998).

Frontiers of X-Ray Astronomy

NASA Astrophysics Data System (ADS)

Fabian, Andrew C.; Pounds, Kenneth A.; Blandford, Roger D.

2004-07-01

Preface; 1. Forty years on from Aerobee 150: a personal perspective K. Pounds; 2. X-ray spectroscopy of astrophysical plasmas S. M. Kahn, E. Behar, A. Kinkhabwala and D. W. Savin; 3. X-rays from stars M. Gudel; 4. X-ray observations of accreting white-dwarf systems M. Cropper, G. Ramsay, C. Hellier, K. Mukai, C. Mauche and D. Pandel; 5. Accretion flows in X-ray binaries C. Done; 6. Recent X-ray observations of supernova remnants C. R. Canizares; 7. Luminous X-ray sources in spiral and star-forming galaxies M. Ward; 8. Cosmological constraints from Chandra observations of galaxy clusters S. W. Allen; 9. Clusters of galaxies: a cosmological probe R. Mushotzky; 10. Obscured active galactic nuclei: the hidden side of the X-ray Universe G. Matt; 11. The Chandra Deep Field-North Survey and the cosmic X-ray background W. N. Brandt, D. M. Alexander, F. E. Bauer and A. E. Hornschemeier; 12. Hunting the first black holes G. Hasinger; 13. X-ray astronomy in the new millennium: a summary R. D. Blandford.

Monte Carlo simulation of cutaneous absorption and reflectance for clear, matt and dark biological tissue with varicosities: an investigation for dermatological laser

NASA Astrophysics Data System (ADS)

Klouch, Nawel; Riane, Houaria; Hamdache, Fatima; Addi, Djamel

2013-05-01

We are interested in modeling the interaction between light and biological tissue from the Monte Carlo method which is an approach used to solve modeling problems in different physical domains. Through the Monte Carlo approach we are going to try to interpret the spectral response absorption, reflectance, transmittance of normal human tissue under its three dominant tints in the visible range (350-700) nm. Then we will focus on the spectral response of the human tissue with varicosities in order to determinate the optimal conditions of operating the semiconductor laser for esthetic aim.

The effects of composition and temperature on chalcophile and lithophile element partitioning into magmatic sulphides

NASA Astrophysics Data System (ADS)

Kiseeva, Ekaterina S.; Wood, Bernard J.

2015-08-01

during fractional crystallisation of magmas generated by 10% melting of depleted mantle provided the latter contains >100 ppm S and about 650 ppm Ce, 550 ppm Nd and 27.5 ppb Pb. Finally, we investigated the hypothesis that the pattern of chalcophile element abundances in the mantle was established by segregation of a late sulphide matte. Taking the elements Cu, Ag, Pb and Zn as examples we find that the Pb/Zn and Cu/Ag ratios of the mantle can, in principle, be explained by segregation of ∼0.4% sulphide matte to the core.

Slope Stability Estimation of the Kościuszko Mound in Cracow

NASA Astrophysics Data System (ADS)

Wrana, Bogumił; Pietrzak, Natalia

2015-06-01

In the paper, the slope stability problem of the Kościuszko Mound in Cracow, Poland is considered. The slope stability analysis was performed using Plaxis FEM program. The outer surface of the mound has complex geometry. The slope of the cone is not uniform in all directions, on the surface of the cone are pedestrian paths. Due to its complicated geometry it was impossible to do computing by Plaxis input pre-procesor. The initial element mesh was generated using Autodesk Autocad 3D and next it was updated by Plaxis program. The soil parameters were adopted in accordance with the detailed geological soil testing performed in 2012. Calculating model includes geogrids. The upper part was covered by MacMat geogrid, while the lower part of the Mound was reinforced using Terramesh Matt geogrid. The slope analysis was performed by successives reduction of φ /c parameters. The total multiplayer ΣMsf is used to define the value of the soil strength parameters. The article presents the results of slope stability before and after the rainfall during 33 days of precipitation in flood of 2010.

Real-time control data wrangling for development of mathematical control models of technological processes

NASA Astrophysics Data System (ADS)

Vasilyeva, N. V.; Koteleva, N. I.; Fedorova, E. R.

2018-05-01

The relevance of the research is due to the need to stabilize the composition of the melting products of copper-nickel sulfide raw materials in the Vanyukov furnace. The goal of this research is to identify the most suitable methods for the aggregation of the real time data for the development of a mathematical model for control of the technological process of melting copper-nickel sulfide raw materials in the Vanyukov furnace. Statistical methods of analyzing the historical data of the real technological object and the correlation analysis of process parameters are described. Factors that exert the greatest influence on the main output parameter (copper content in matte) and ensure the physical-chemical transformations are revealed. An approach to the processing of the real time data for the development of a mathematical model for control of the melting process is proposed. The stages of processing the real time information are considered. The adopted methodology for the aggregation of data suitable for the development of a control model for the technological process of melting copper-nickel sulfide raw materials in the Vanyukov furnace allows us to interpret the obtained results for their further practical application.

Pyrometallurgical Recovery of Platinum Group Metals from Spent Catalysts

NASA Astrophysics Data System (ADS)

Peng, Zhiwei; Li, Zhizhong; Lin, Xiaolong; Tang, Huimin; Ye, Lei; Ma, Yutian; Rao, Mingjun; Zhang, Yuanbo; Li, Guanghui; Jiang, Tao

2017-09-01

As an important secondary resource with abundant platinum group metals (PGMs), spent catalysts demand recycling for both economic and environmental benefits. This article reviews the main pyrometallurgical processes for PGM recovery from spent catalysts. Existing processes, including smelting, vaporization, and sintering processes, are discussed based in part on a review of the physiochemical characteristics of PGMs in spent catalysts. The smelting technology, which produces a PGM-containing alloy, is significantly influenced by the addition of various collectors, such as lead, copper, iron, matte, or printed circuit board (PCB), considering their chemical affinities for PGMs. The vaporization process can recover PGMs in vapor form at low temperatures (250-700°C), but it suffers high corrosion and potential environmental and health risks as a result of involvement of the hazardous gases, mainly Cl2 and CO. The sintering process serves as a reforming means for recycling of the spent catalysts by in situ reduction of their oxidized PGMs components. Among these processes, the smelting process seems more promising although its overall performance can be further improved by seeking a suitable target-oriented collector and flux, together with proper pretreatment and process intensification using an external field.

Colour Model for Outdoor Machine Vision for Tropical Regions and its Comparison with the CIE Model

NASA Astrophysics Data System (ADS)

Sahragard, Nasrolah; Ramli, Abdul Rahman B.; Hamiruce Marhaban, Mohammad; Mansor, Shattri B.

2011-02-01

Accurate modeling of daylight and surface reflectance are very useful for most outdoor machine vision applications specifically those which are based on color recognition. Existing daylight CIE model has drawbacks that limit its ability to predict the color of incident light. These limitations include lack of considering ambient light, effects of light reflected off the ground, and context specific information. Previously developed color model is only tested for a few geographical places in North America and its accountability is under question for other places in the world. Besides, existing surface reflectance models are not easily applied to outdoor images. A reflectance model with combined diffuse and specular reflection in normalized HSV color space could be used to predict color. In this paper, a new daylight color model showing the color of daylight for a broad range of sky conditions is developed which will suit weather conditions of tropical places such as Malaysia. A comparison of this daylight color model and daylight CIE model will be discussed. The colors of matte and specular surfaces have been estimated by use of the developed color model and surface reflection function in this paper. The results are shown to be highly reliable.

Converging Paradigms: A Reflection on Parallel Theoretical Developments in Psychoanalytic Metapsychology and Empirical Dream Research.

PubMed

Schmelowszky, Ágoston

2016-08-01

In the last decades one can perceive a striking parallelism between the shifting perspective of leading representatives of empirical dream research concerning their conceptualization of dreaming and the paradigm shift within clinically based psychoanalytic metapsychology with respect to its theory on the significance of dreaming. In metapsychology, dreaming becomes more and more a central metaphor of mental functioning in general. The theories of Klein, Bion, and Matte-Blanco can be considered as milestones of this paradigm shift. In empirical dream research, the competing theories of Hobson and of Solms respectively argued for and against the meaningfulness of the dream-work in the functioning of the mind. In the meantime, empirical data coming from various sources seemed to prove the significance of dream consciousness for the development and maintenance of adaptive waking consciousness. Metapsychological speculations and hypotheses based on empirical research data seem to point in the same direction, promising for contemporary psychoanalytic practice a more secure theoretical base. In this paper the author brings together these diverse theoretical developments and presents conclusions regarding psychoanalytic theory and technique, as well as proposing an outline of an empirical research plan for testing the specificity of psychoanalysis in developing dream formation.

Chromatic Dimensions Earthy, Watery, Airy, and Fiery.

PubMed

Albertazzi, Liliana; Koenderink, Jan J; van Doorn, Andrea

2015-01-01

In our study, for a small number of antonyms, we investigate whether they are cross-modally or ideaesthetically related to the space of colors. We analyze the affinities of seven antonyms (cold-hot, dull-radiant, dead-vivid, soft-hard, transparent-chalky, dry-wet, and acid-treacly) and their intermediate connotations (cool-warm, matt-shiny, numb-lively, mellow-firm, semi-transparent-opaque, semi-dry-moist, and sour-sweet) as a function of color. We find that some antonyms relate to chromatic dimensions, others to achromatic ones. The cold-hot antonym proves to be the most salient dimension. The dry-wet dimension coincides with the cold-hot dimension, with dry corresponding to hot and wet to cold. The acid-treacly dimension proves to be transversal to the cold-hot dimension; hence, the pairs mutually span the chromatic domain. The cold-hot and acid-treacly antonyms perhaps recall Hering's opponent color system. The dull-radiant, transparent-chalky, and dead-vivid pairs depend little upon chromaticity. Of all seven antonyms, only the soft-hard one turns out to be independent of the chromatic structure. © The Author(s) 2015.

Upgrading nickel content of limonite nickel ore through pelletization, selective reduction and magnetic separation

NASA Astrophysics Data System (ADS)

Mayangsari, W.; Prasetyo, A. B.; Prasetiyo, Puguh

2018-04-01

Limonite nickel ore has potency to utilize as raw material for ferronickel or nickel matte, since it has low grade nickel content, thus process development is needed to find the acceptable process for upgrading nickel. The aim of this research is to determine upgrading of Ni content as result of selective reduction of limonite nickel pellet continued by magnetic separation as effect of temperature and time reduction as well as coal and CaSO4 addition. There are four steps to perform this research, such as preparation including characterization of raw ore and pelletization, selective reduction, magnetic separation and characterization of products by using AAS, XRD and SEM. Based on the result study, pellet form can upgrade 77.78% higher than powder form. Upgrading of Ni and Fe content was up to 3fold and 1.5fold respectively from raw ore used when reduced at 1100°C for 60 minutes with composition of coal and CaSO4, both 10%. The excess of CaSO4 addition caused fayalite formation. Moreover, S2 from CaSO4 also support to reach low melting point and enlardge particle size of metal formed.

Micro Dot Patterning on the Light Guide Panel Using Powder Blasting

PubMed Central

Jang, Ho Su; Cho, Myeong Woo; Park, Dong Sam

2008-01-01

This study is to develop a micromachining technology for a light guide panel(LGP) mold, whereby micro dot patterns are formed on a LGP surface by a single injection process instead of existing screen printing processes. The micro powder blasting technique is applied to form micro dot patterns on the LGP mold surface. The optimal conditions for masking, laminating, exposure, and developing processes to form the micro dot patterns are first experimentally investigated. A LGP mold with masked micro patterns is then machined using the micro powder blasting method and the machinability of the micro dot patterns is verified. A prototype LGP is test- injected using the developed LGP mold and a shape analysis of the patterns and performance testing of the injected LGP are carried out. As an additional approach, matte finishing, a special surface treatment method, is applied to the mold surface to improve the light diffusion characteristics, uniformity and brightness of the LGP. The results of this study show that the applied powder blasting method can be successfully used to manufacture LGPs with micro patterns by just single injection using the developed mold and thereby replace existing screen printing methods. PMID:27879740

Gleaming and dull surface textures from photonic-crystal-type nanostructures in the butterfly Cyanophrys remus.

PubMed

Kertész, Krisztián; Bálint, Zsolt; Vértesy, Zofia; Márk, Géza I; Lousse, Virginie; Vigneron, Jean Pol; Rassart, Marie; Biró, László P

2006-08-01

Photonic-crystal-type nanostructures occurring in the scales of the butterfly Cyanophrys remus were investigated by optical and electron microscopy (scanning and transmission electron microscopy), reflectance measurements (specular, integrated, and goniometric), by fast Fourier transform analysis of micrographs, by modeling, and by numerical simulation of the measured reflectance data. By evaluating the collected data in a cross-correlated way, we show that the metallic blue dorsal coloration originates from scales which individually are photonic single crystals of 50 x 120 microm2 , while the matt pea-green coloration of the ventral side arises from the cumulative effect of randomly arranged, bright photonic crystallites (blue, green, and yellow) with typical diameters in the 3-10-mum range. Both structures are based on a very moderate refractive index contrast between air and chitin. Using a bleached specimen in which the pigment has decayed with time, we investigated the role of pigment in photonic-crystal material in the process of color generation. The possible biologic utility of the metallic blue (single-crystal) and dull green (polycrystal) textures both achieved with photonic crystals are briefly discussed. Potential applications in the field of colorants, flat panel displays, smart textiles, and smart papers are surveyed.

Museum lighting: Why are some illuminants preferred?

NASA Astrophysics Data System (ADS)

Scuello, Michael; Abramov, Israel; Gordon, James; Weintraub, Steven

2004-02-01

We had shown earlier that viewers prefer to look at artworks under illuminants of ~3600 K. In the latest paper we tested the hypothesis that the preferred illuminant is one that appears neither warm nor cool and repeated the settings at each of four illuminances to test the stability of the findings. Observers looked at a neutral white reflectance standard hung on a matte-gray wall lit by overhead banks of lamps whose combined value could be adjusted continuously between 3000 and 4400 K while illuminance was kept constant. Illuminance ranged from 50 to 2000 lux. Observers adjusted color temperature until they were satisfied that the standard looked neither warm nor cool. The mean for a group of eight observers was approximately 3700, independent of intensity; this corresponds to a dominant wavelength of ~580 nm. In a separate study four observers scaled the apparent warmth or coolness of flashes of equiluminant monochromatic lights; the warm-cool transition was between 560 and 580 nm; warmness was completely predicted by the perceived redness of each light as derived from hue and saturation scaling functions from the same group.

Jules Verne's Journey to the centre of the Earth: the secret of counterdepressive narratives.

PubMed

Sanchez-Cardenas, Michel

2005-12-01

The author interprets Jules Verne's Journey to the centre of the Earth with the help of Matte Blanco's theoretical framework, which describes the principle of symmetry and the principle of generalization. The first states that, from the moment an element or a proposition becomes conscious, it coexists in the unconscious with its symmetrically opposite form. The second refers to the confusion of elements once they have been apprehended by thought as containing a common point; they are put into larger and larger groups which merge into an indivisible whole. Verne's novel is built on paired elements which become symmetrized (e.g. distinct minerals vs molten lava; scientific rationality vs madness; the living vs the dead, etc.). These elements in turn become confused with one another, thanks largely to the novel's atmosphere of oral incorporation. This allows the fusion between subject and object, and, in particular, between the orphaned hero and his dead (Earth) mother. The novel's narrative evolution through three stages (separation, fusion and de-fusion, which are paralleled by rational, irrational and rational thought) can thus be understood as a mourning process. Similar processes can be found in other literary works.

SuperGaussian distribution functions in inhomogenous plasmas

NASA Astrophysics Data System (ADS)

Matte, Jean-Pierre

2008-11-01

In plasmas heated by a narrow laser beam, the shape of the distribution function is influenced by both the absorption, which tends to give a superGaussian (DLM) distribution function [1], and the effects of heat flow, which tends to make the distribution more Maxwellian, when the hot region is considerably wider than the laser beam [2]. Thus, it is only at early times that the deformation is as strong as predicted by our uniform intensity formula [1]. A large number of electron kinetic simulations of a finite width laser beam heating a uniform density plasma were performed with the electron kinetic code FPI [1] to study the competition between these two mechanisms. In some cases, the deformation is approximately given by this formula if we average the laser intensity over the entire plasma. This may explain why distributions were more Maxwellian than expected in some experiments [3]. [0pt] [1] J.-P. Matte et al., Plasma Phys. Contr. Fusion 30, 1665 (1988) [2] S. Brunner and E. Valeo, Phys. Plasmas 9, 923 (2002) [3] S.H. Glenzer et al., Phys. Rev. Lett. 82, 97 (1999).

A Development of Force Plate for Biomechanics Analysis of Standing and Walking

NASA Astrophysics Data System (ADS)

Wardoyo, S.; Hutajulu, P. T.; Togibasa, O.

2016-08-01

Force plates are known as an excellent teaching aid to demonstrate the kinematics and dynamics of motion and commonly used in biomechanics laboratories to measure ground forces involved in the motion of human. It is consist of a metal plate with sensors attached to give an electrical output proportional to the force on the plate. Moreover, force plates are useful for examining the kinetic characteristics of an athlete's movement. They provide information about the external forces involved in movement that can aid a coach or sports scientist to quantitatively evaluate the athlete's skill development. In this study, we develop our prototype of force plate with less than 100,- simply by using flexible force transducer attached inside rubber matt, in the form of square blocks (dimension: 250 mm × 150 mm × 10 mm), with maximum load up to 60 kg. The handmade force plate was tested by applying biomechanics analysis for standing and walking. The testing was done on Experimental Soccer Courses’ students at the Department of Physical Education, Health and Recreation, University of Cenderawasih. The design of the force plate system together with biomechanics analysis will be discussed.

Tiny cells meet big questions: a closer look at bacterial cell biology.

PubMed

Goley, Erin D

2013-04-01

While studying actin assembly as a graduate student with Matt Welch at the University of California at Berkeley, my interest was piqued by reports of surprising observations in bacteria: the identification of numerous cytoskeletal proteins, actin homologues fulfilling spindle-like functions, and even the presence of membrane-bound organelles. Curiosity about these phenomena drew me to Lucy Shapiro's lab at Stanford University for my postdoctoral research. In the Shapiro lab, and now in my lab at Johns Hopkins, I have focused on investigating the mechanisms of bacterial cytokinesis. Spending time as both a eukaryotic cell biologist and a bacterial cell biologist has convinced me that bacterial cells present the same questions as eukaryotic cells: How are chromosomes organized and accurately segregated? How is force generated for cytokinesis? How is polarity established? How are signals transduced within and between cells? These problems are conceptually similar between eukaryotes and bacteria, although their solutions can differ significantly in specifics. In this Perspective, I provide a broad view of cell biological phenomena in bacteria, the technical challenges facing those of us who peer into bacterial cells, and areas of common ground as research in eukaryotic and bacterial cell biology moves forward.

PREFACE: 3rd Workshop on Theory, Modelling and Computational Methods for Semiconductors (TMCSIII)

NASA Astrophysics Data System (ADS)

Califano, Marco; Migliorato, Max; Probert, Matt

2012-05-01

contributions also from representatives of renowned theoretical groups from many European countries (Spain, France, Ireland, Germany, Italy, Poland, Denmark, Sweden, Serbia, Greece, etc.), as well as Asia (India) and Africa (Algeria, Tunisia and South Africa). We would like to thank all participants for making this a very successful meeting and for their contribution to the conference programme and these proceedings. We would also like to acknowledge the financial support from the Institute of Physics (Computational Physics group and Semiconductor Physics group), and QuantumWise (distributors of Atomistix). The Editors Acknowledgments Conference Organising Committee: Marco Califano (University of Leeds) Max Migliorato (University of Manchester) Matt Probert (University of York) Programme Committee: Stewart Clark (University of Durham) Aldo Di Carlo (University of Rome 'Tor Vergata', Italy) Ben Hourahine (University of Strathclyde) Lev Kantorovich (King's College London) Risto Nieminen (Helsinki University of Technology, Finland) Eoin O'Reilly (Tyndall Institute Cork, Republic of Ireland) Mauro Pereira (Sheffield Hallam University) John Robertson (University of Cambridge) Mervin Roy (University of Leicester) Stanko Tomic (University of Salford) David Whittaker (University of Sheffield) The proceedings were edited and compiled by Marco Califano, Max Migliorato and Matt Probert.

The "granite pump": LP/HT metamorphism and exhumation in the Montagne Nore (S-France)

NASA Astrophysics Data System (ADS)

Franke, W.; Doublier, M. P.; Doerr, W.; Stein, E.

2003-04-01

The Montagne Noire at the southern margin of the French Massif Central represents an exceptional case of a hot metamorphic core complex evolved from a thrust stack in a foreland position. The core of the structure (Zone Axiale) exposes granites and LP/HT gneisses up to anatectic grade. The hot core is encased by ENE-trending shear zones, which define a dextral pull-apart structure. Ductile extension is documented by top WSW shearing in the W, and ENE shearing in the E part of the Zone Axiale (eg, MATTE et al., 1998). Extension in ENE and reduction of the metamorphic profile are accompanied by NNW-directed contraction ("pinched pull-apart"). Palaeozoic sediments on the southern flank of the Zone Axiale exhibit only greenschist to diagenetic grades of metamorphism. Conodont alteration index (WIEDERER et al., 2002) and illite crystallinity (Doublier, this meeting) reveal a decrease of metamorphic temperature away from the hot core. Metamorphic isograds cut across the axial planes of D1 nappes. These features suggest that metamorphism was imposed by the rising hot core. Accordingly, the palaeozoic sediments show a tectonic evolution which closely resembles that of the gneissic core (extension top ENE, contraction in NNW). Structures relating to stacking (D1) have survived at the southern margin of the Montagne Noire. U-Pb studies (TIMS on single zircon and monazite) reveal peak metamorphism and magmatism already at c. 315 Ma (KLAMA et al., 2001), i.e., only <10 Ma after the end of flysch deposition in latest Visean/Early Namurian time (<= 323 Ma). The coincidence, within error, of the U-Pb ages and earlier Ar/Ar ages (MALUSKI et al., 1991) suggest rapid cooling. Synchronous granite emplacement and metamorphism is best explained by advective heating. Since granites are not generated in foreland settings, we propose derivation of the melts from areas of thickened crust adjacent to the N. Transport and emplacement of granites was essentially driven by the hydraulic

A Foamy Lava Lake at Kilauea Volcano, Hawai`i

NASA Astrophysics Data System (ADS)

Poland, M. P.; Carbone, D.

2012-12-01

the change in lava level over time (data courtesy of Matt Patrick), we estimated that a lava density of about 0.8 g/cm3 is required to fit the gravity time series. Gravity results, therefore, argue that the upper part of the vent is occupied by a low-density lava foam (in agreement with models of Kilauea's summit eruption from seismic, gas, and geologic data by Tim Orr and Matt Patrick) and provide the only means of quantifying the lava lake density.

Ab initio Study of Transition metal binding to the Prion Protein

NASA Astrophysics Data System (ADS)

Cox, Daniel L.; Singh, Rajiv R. P.; Pan, Jianping

2004-03-01

Fundamental understanding of the prion protein (PrP) is of critical public health importance in view of mad cow and chronic wasting diseases. In recent years, it has been shown that the normal form (PrP^c) binds copper^1), and the structure of the copper binding domain has been elaborated. Hypotheses about toxicity associated with binding of other metals (notably manganese) have been put forward, Accordingly, using the ab initio SIESTA density functional theory code^2), we calculated the binding energy E_B(M) of M-(PrP) complexes relative to initially uncomplexed M ions, with M=Cu,Ni,Zn,Mn and (PrP)^* the minimal binding domain. The binding energy trend is E_B(Ni)>E_B(Cu)>E_B(Zn)>E_B(Mn), consistent with recent experiments apart from the surprising stability of Ni. We will also present preliminary results for binding of initially complexed M ions. *-Supported by U.S. DOE, Office of Basic Energy Sciences, Division of Materials Research 1) G.S. Jackson et al., Proc. Nat. Acad. Sci. (USA) 98, 8531 (2001). 2) P. Ordejón, et al., Phys. Rev. B53, R10441 (1996); J.M. Soler et al., J. Phys. Cond. Matt. 14, 2745 (2002).

Evaluation of the shape of the specular peak for high glossy surfaces

NASA Astrophysics Data System (ADS)

Obein, Gaël.; Ouarets, Shiraz; Ged, Guillaume

2014-02-01

Gloss is the second most relevant visual attribute of a surface beside its colour. While the colour originates from the wavelength repartition of the reflected light, gloss originates from its angular distribution. When an observer is asked to evaluate the gloss of a surface, he always first orientate his eyes along the specular direction before lightly tilting the examined sample. This means that gloss is located in and around the specular direction, in a peak that is called the specular peak. On the one hand, this peak is flat and broad on matte surfaces on the other hand, it is narrow and sharp on high gloss surfaces. For the late ones, the FWHM of the specular peak is less than 2° which can be quite difficult to measure. We developed a dedicated facility capable of measuring specular peak with a FWHM up to 0,1 °. We measured the evolution of the peak according to the angle of illumination and the specular gloss of the sample in the restricted field of very glossy surface. The facility and peaks measured are presented in the paper. The next step will be to identify the correlations between the peak and the roughness of the sample.

Controlling material reactivity using architecture

NASA Astrophysics Data System (ADS)

Sullivan, Kyle

2017-06-01

The reactivity of thermites can be tailored through selection of several parameters, and can range from very slow burns to rapid deflagrations. 3D printing is a rapidly emerging field, and offers the potential to build architected parts. Here we sought to explore whether controlling such features could be a suitable path forward for gaining additional control of the reactivity. This talk discusses several new methods for preparing thermite samples with controlled architectures using 3D printing. Additionally, we demonstrate that the architecture can play a role in the reactivity of an object. Our results suggest that architecture can be used to tailor the convective and/or advective energy transport during a deflagration, thus enhancing or retarding the reaction. The results are promising in that they give researchers an additional way of controlling the energy release rate without defaulting to the conventional approach of changing the formulation. This work was performed under the auspices of the U.S. Department of Energy by Lawrence Livermore National Laboratory under contract DE-AC52-07NA27344. LLNL-ABS-708525. In collaboration with: Cheng Zhu, Eric Duoss, Matt Durban, Alex Gash, Alexandra Golobic, Michael Grapes, David Kolesky, Joshua Kuntz, Jennifer Lewis, Christopher Spadaccini; LAWRENCE LIVERMORE NATIONAL LAB.

Mortality among workers in a nickel refinery and alloy manufacturing plant in West Virginia.

PubMed

Enterline, P E; Marsh, G M

1982-06-01

Workers from a nickel refinery at Huntington, W. Va., which received a nickel matte from smelters in Ontario, Canada, during 1922-47 were studied for excesses in sinonasal and lung cancers. Other workers who were in a nickel alloy production plant operated in conjunction with the refinery but who did not work in the refinery were also studied. Evidence is presented on the existence of a nasal cancer hazard and possibly a lung cancer hazard among workers employed in the nickel refinery. Two of these workers developed a sinonasal cancer. Evidence of a respiratory cancer hazard in other parts of the plant before or after 1947 is weak, and the observed results could be due to chance variations from the mortality experience of the standard reference populations. Among nonrefinery workers hired while the nickel refinery was in operation, 2 employees had a probable sinonasal cancer. The first employee worked in a high-temperature conversion process where nickel carbonate was decomposed to nickel oxide, and the second employee is believed to have done maintenance work in the plant where this process was used. For both cohorts combined there were slight overall excesses in lung, stomach, and prostate cancers with some evidence of a dose-response relationship for these cancers.

Characterization of deposited CdS thin films by Spray Pyrolysis method and used in Cd/CdS/p-Si/Al structure

NASA Astrophysics Data System (ADS)

Özakın, Oǧuzhan; Aktaş, Şeydanur; Güzeldir, Betül; Saǧlam, Mustafa

2017-04-01

In our study, as p-type crystalline Si substrate was used. Omic contact was performed by evaporating Al metal on the matt surface of crystal. On the other surface of it CdS thin film were enlarged with the technique of Spray Pyrolysis. Structural characteristics of the grown thin film was examined SEM and EDAX image. When examining SEM image of CdS thin film were totally covered the p-Si crystal surface of it was nearly homogeneous and The EDAX spectra showed that the expected different ratios metal percent exist in the alloys, approximately. On the CdS films whose surface features were investigated, at 10-7 torr pressure was obtained Cd/CdS/p-Si/Al sandwich structure by evaporating Cd. Firstly, the I-V (current-voltage) characteristics on 80K between 320K at room temperature of this structure was measured. I-V characteristics of the examined at parameters diodes calculation, Thermionic Emission, were used. The characteristic parameters such as barrier height and ideality factor of this structure have been calculated from the forward bias I-V characteristics. Consequently, it was seen that CdS thin film grown on p-Si semiconductor will be used confidently in Cd/p-Si metal-semiconductor contacts thanks to Spray Pyrolysis method.

Baculovirus infection induces disruption of the nuclear lamina.

PubMed

Zhang, Xiaomei; Xu, Kaiyan; Wei, Denghui; Wu, Wenbi; Yang, Kai; Yuan, Meijin

2017-08-10

Baculovirus nucleocapsids egress from the nucleus primarily via budding at the nuclear membrane. The nuclear lamina underlying the nuclear membrane represents a substantial barrier to nuclear egress. Whether the nuclear lamina undergoes disruption during baculovirus infection remains unknown. In this report, we generated a clonal cell line, Sf9-L, that stably expresses GFP-tagged Drosophila lamin B. GFP autofluorescence colocalized with immunofluorescent anti-lamin B at the nuclear rim of Sf9-L cells, indicating GFP-lamin B was incorporated into the nuclear lamina. Meanwhile, virus was able to replicate normally in Sf9-L cells. Next, we investigated alterations to the nuclear lamina during baculovirus infection in Sf9-L cells. A portion of GFP-lamin B localized diffusely at the nuclear rim, and some GFP-lamin B was redistributed within the nucleus during the late phase of infection, suggesting the nuclear lamina was partially disrupted. Immunoelectron microscopy revealed associations between GFP-lamin B and the edges of the electron-dense stromal mattes of the virogenic stroma, intranuclear microvesicles, and ODV envelopes and nucleocapsids within the nucleus, indicating the release of some GFP-lamin B from the nuclear lamina. Additionally, GFP-lamin B phosphorylation increased upon infection. Based on these data, baculovirus infection induced lamin B phosphorylation and disruption of the nuclear lamina.

Structural, Electronic and Vibrational Properties of Nax Si 136(0 < x < 24) Clathrates

NASA Astrophysics Data System (ADS)

Higgins, Craig; Nenghabi, Emmanuel; Myles, Charles; Biswas, Koushik; Beekman, Matt; Nolas, George

2011-03-01

CRAIG HIGGINS, EMMANUEL NENGHA BI† , CHARLES W. MYLES, Texas Tech U.; KOUSHIK BISWAS, Oak Ridge National Lab; MATT BEEKMAN, U. of Oregon; GEORGE S. NOLAS, U. of South Florida - Na x Si 136 is a Type II clathrate with important thermoelectric properties. It's face-centered cubic lattice contains polyhedral ``cages'' of silicon atoms with Na atom ``guests'' in the cages. This material is very interesting because powder X-ray diffraction experiments 1 for differing Na content x have shown that, for increasing x in the range 0

A Registration Method Based on Contour Point Cloud for 3D Whole-Body PET and CT Images

PubMed Central

Yang, Qiyao; Wang, Zhiguo; Zhang, Guoxu

2017-01-01

The PET and CT fusion image, combining the anatomical and functional information, has important clinical meaning. An effective registration of PET and CT images is the basis of image fusion. This paper presents a multithread registration method based on contour point cloud for 3D whole-body PET and CT images. Firstly, a geometric feature-based segmentation (GFS) method and a dynamic threshold denoising (DTD) method are creatively proposed to preprocess CT and PET images, respectively. Next, a new automated trunk slices extraction method is presented for extracting feature point clouds. Finally, the multithread Iterative Closet Point is adopted to drive an affine transform. We compare our method with a multiresolution registration method based on Mattes Mutual Information on 13 pairs (246~286 slices per pair) of 3D whole-body PET and CT data. Experimental results demonstrate the registration effectiveness of our method with lower negative normalization correlation (NC = −0.933) on feature images and less Euclidean distance error (ED = 2.826) on landmark points, outperforming the source data (NC = −0.496, ED = 25.847) and the compared method (NC = −0.614, ED = 16.085). Moreover, our method is about ten times faster than the compared one. PMID:28316979

KSC-99pp1379

NASA Image and Video Library

1999-12-02

KENNEDY SPACE CENTER, FLA. -- In the Space Station Processing Facility, STS-102's Expedition II discuss the Pressurized Mating Adapter (PMA-3) (top of photo) with workers from Johnson Space Center. From left are Yuriy Vladimirovich Usachev, Dave Moore (JSC), Susan J. Helms, James S. Voss, Arne Aamodt and Matt Myers (both of JSC). The PMA-3 is a component of the International Space Station (ISS). Voss, Helms and Usachev will be staying on the ISS, replacing the Expedition I crew, Bill Shepherd, Sergei Krikalev and Yuri Gidzenko. Along with the crew, Mission STS-102 also will be carrying the Leonardo Multi-Purpose Logistics Module (MPLM) to the ISS. The Leonardo will be filled with equipment and supplies to outfit the U.S. laboratory module, which will have been carried to the ISS on a preceding Shuttle flight. In order to function as an attached station module as well as a cargo transport, logistics modules (there are three) also include components that provide some life support, fire detection and suppression, electrical distribution and computer functions. Eventually, the modules also will carry refrigerator freezers for transporting experiment samples and food to and from the station. STS-102 is scheduled to launch no earlier than Oct. 19, 2000, from Launch Pad 39A, Kennedy Space Center

Reproducing oil paint gloss in print for the purpose of creating reproductions of Old Masters

NASA Astrophysics Data System (ADS)

Elkhuizen, Willemijn S.; Lenseigne, Boris A. J.; Baar, Teun; Verhofstad, Wim; Tempelman, Erik; Geraedts, Jo M. P.; Dik, Joris

2015-03-01

In the field of Fine Art reproduction, 3D scanning plus 3D printing, combined with dedicated software, now allows to capture and reproduce the color and texture of oil paintings. However, for life-like reproduction of the material appearance of such paintings, the typical gloss and translucency must also be included, which is currently not the case. The aim of this paper is to elaborate on the challenges and results of capturing and reproducing oil paint gloss (next to texture and color) using a scanning and printing system. A sample was hand-made using oil paint and acrylic varnish, and its gloss was then reproduced. A gloss map of the painted sample was acquired using a high end DLSR camera and a simple acquisition protocol. Next, Océ High Resolution 3D printing technology was used to create samples with spatially varying gloss. For this, two different strategies were combined: (1) multilevel half-toning of the colors was used to reproduce matte color layers, and (2) varnish was half-toned on top in increasing coverage to recreate increasing gloss levels. This paper presents an overview of the state-of-the-art literature in gloss reproduction and perception, our process of reproduction as well as the visual evaluation of the quality of the created reproduction.

Zero bias STS Kondo anomalies of Co impurities on Cu surfaces: do ab initio calculations work?

NASA Astrophysics Data System (ADS)

Baruselli, Pier Paolo; Smogunov, Alexander; Fabrizio, Michele; Requist, Ryan; Tosatti, Erio

2012-02-01

Transition metal atoms such as Co on Cu (111), (100), and (110) surfaces produce STS I-V spectra showing different zero bias Kondo anomalies [1] but these differences have been neither quantitatively predicted nor fully explained theoretically. We apply to this problem the DFT+NRG scheme of Lucignano et al [2], where one solves by NRG an Anderson model built from ab initio phase shifts provided by DFT. For Co/Cu(100) and Co/Cu(110) our calculations describe correctly the experimental trend of Kondo temperatures, and fairly the lineshapes too. By contrast, they fail to describe Co/Cu(111) where in particular the anti-lorentzian lineshape found in experiment remains unexplained. This failure underscores the role of surface states, probably relevant for Co/Cu(111) [3] but not correctly described by our thin slab calculations. Future efforts to quantitatively include Kondo screening by surface states are therefore called for. 1. N. Knorr et al PRL 88, 096804 (2002); M. Ternes et al 2009 J. Phys.: Cond. Matt. 21, 053001 (2009); A. Gumbsch et al PRB81, 165420 (2010). 2. P. Lucignano et al Nature Mat. 8, 563 (2009); P.P. Baruselli et al, Physica E, doi:10.1016/j.physe.2011.05.005. 3. C. Lin et al. PRB 71, 035417 (2005).

High-temperature experimental and thermodynamic modelling research on the pyrometallurgical processing of copper

NASA Astrophysics Data System (ADS)

Hidayat, Taufiq; Shishin, Denis; Decterov, Sergei A.; Hayes, Peter C.; Jak, Evgueni

2017-01-01

Uncertainty in the metal price and competition between producers mean that the daily operation of a smelter needs to target high recovery of valuable elements at low operating cost. Options for the improvement of the plant operation can be examined and decision making can be informed based on accurate information from laboratory experimentation coupled with predictions using advanced thermodynamic models. Integrated high-temperature experimental and thermodynamic modelling research on phase equilibria and thermodynamics of copper-containing systems have been undertaken at the Pyrometallurgy Innovation Centre (PYROSEARCH). The experimental phase equilibria studies involve high-temperature equilibration, rapid quenching and direct measurement of phase compositions using electron probe X-ray microanalysis (EPMA). The thermodynamic modelling deals with the development of accurate thermodynamic database built through critical evaluation of experimental data, selection of solution models, and optimization of models parameters. The database covers the Al-Ca-Cu-Fe-Mg-O-S-Si chemical system. The gas, slag, matte, liquid and solid metal phases, spinel solid solution as well as numerous solid oxide and sulphide phases are included. The database works within the FactSage software environment. Examples of phase equilibria data and thermodynamic models of selected systems, as well as possible implementation of the research outcomes to selected copper making processes are presented.

Stem CO2 efflux in six co-occurring tree species: underlying factors and ecological implications.

PubMed

Rodríguez-Calcerrada, Jesús; López, Rosana; Salomón, Roberto; Gordaliza, Guillermo G; Valbuena-Carabaña, María; Oleksyn, Jacek; Gil, Luis

2015-06-01

Stem respiration plays a role in species coexistence and forest dynamics. Here we examined the intra- and inter-specific variability of stem CO2 efflux (E) in dominant and suppressed trees of six deciduous species in a mixed forest stand: Fagus sylvatica L., Quercus petraea [Matt.] Liebl, Quercus pyrenaica Willd., Prunus avium L., Sorbus aucuparia L. and Crataegus monogyna Jacq. We conducted measurements in late autumn. Within species, dominants had higher E per unit stem surface area (Es ) mainly because sapwood depth was higher than in suppressed trees. Across species, however, differences in Es corresponded with differences in the proportion of living parenchyma in sapwood and concentration of non-structural carbohydrates (NSC). Across species, Es was strongly and NSC marginally positively related with an index of drought tolerance, suggesting that slow growth of drought-tolerant trees is related to higher NSC concentration and Es . We conclude that, during the leafless period, E is indicative of maintenance respiration and is related with some ecological characteristics of the species, such as drought resistance; that sapwood depth is the main factor explaining variability in Es within species; and that the proportion of NSC in the sapwood is the main factor behind variability in Es among species. © 2014 John Wiley & Sons Ltd.

Evolution of Size and Chemical Composition of Copper Concentrate Particles Oxidized Under Simulated Flash Smelting Conditions

NASA Astrophysics Data System (ADS)

Pérez-Tello, Manuel; Parra-Sánchez, Víctor R.; Sánchez-Corrales, Víctor M.; Gómez-Álvarez, Agustín; Brown-Bojórquez, Francisco; Parra-Figueroa, Roberto A.; Balladares-Varela, Eduardo R.; Araneda-Hernández, Eugenia A.

2018-04-01

An experimental study was conducted to elucidate the evolution of size and chemical composition of La Caridad copper concentrate particles during oxidation under simulated flash smelting conditions. Input variables tested included particle size and oxygen concentration in the process gas. The response variables included the size distributions, chemical composition, and morphology of the reacted particles at seven locations along a laboratory reactor. Particles with initial size < 45 µm contained mostly chalcopyrite, they increased their mean size and decreased the amount of dust in the population during oxidation. This was explained by a reaction path involving rapid melting followed by collision and coalescence of reacting droplets during flight. Particles with sizes > 45 µm contained varying amounts of chalcopyrite and pyrite, and tended to either maintain or decrease their mean size upon oxidation. When size reduction was observed, dust was produced because of fragmentation, and the particles showed no evidence of collisions during flight. The main oxidation products detected in the particles consisted of matte, cuprospinel, and magnetite. A plot of the mean size divided by the mean size in the feed against the fraction of sulfur eliminated generalized the experimental data so far reported in the literature, and helped identify the reaction path followed by the particles.

The Development of Improved Risk Assessment Methods for Use in Industrial Environmental Management Systems

DOE Office of Scientific and Technical Information (OSTI.GOV)

Manners, T.K.

2006-07-01

Industrial sites that store or use chemicals are controlled in the UK under the COMAH (Control Of Major Accident Hazards) Regulations 1999 [1] based on their holdings of 'Dangerous Substances'. The COMAH Regulations [1] came into force in 1999 and are the UK's response to the European Union's Seveso II Directive. The purpose of these Regulations [1] is to: - Identify Major Accident Hazards (MAH); - Ensure that control measures are in place to prevent a MAH; - Ensure that mitigatory measures are in place to limit effects if MAH do occur. The UK's Health and Safety Executive (HSE), andmore » the Environment Agency (EA) jointly enforce the Regulations [1]. The fundamental requirement is given in the statement below, which is taken directly from the Regulations [1]. 'Every operator shall take all measures necessary to prevent major accidents and limit their consequences to persons and the environment'. This paper describes the development of a six-step screening methodology designed to identify Major Accidents To The Environment (MATTE) and improved consequence definitions that can be used in risk matrices to define the severity of an environmental fault. The method has been designed to be compatible with existing Environmental Management Systems (EMS) used in the chemical and nuclear industry. (authors)« less

Characterizing and Improving Distributed Intrusion Detection Systems.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hurd, Steven A; Proebstel, Elliot P.

2007-11-01

Due to ever-increasing quantities of information traversing networks, network administrators are developing greater reliance upon statistically sampled packet information as the source for their intrusion detection systems (IDS). Our research is aimed at understanding IDS performance when statistical packet sampling is used. Using the Snort IDS and a variety of data sets, we compared IDS results when an entire data set is used to the results when a statistically sampled subset of the data set is used. Generally speaking, IDS performance with statistically sampled information was shown to drop considerably even under fairly high sampling rates (such as 1:5). Characterizingmore » and Improving Distributed Intrusion Detection Systems4AcknowledgementsThe authors wish to extend our gratitude to Matt Bishop and Chen-Nee Chuah of UC Davis for their guidance and support on this work. Our thanks are also extended to Jianning Mai of UC Davis and Tao Ye of Sprint Advanced Technology Labs for their generous assistance.We would also like to acknowledge our dataset sources, CRAWDAD and CAIDA, without which this work would not have been possible. Support for OC48 data collection is provided by DARPA, NSF, DHS, Cisco and CAIDA members.« less

Warm-up Optimizes Postural Control but Requires Some Minutes of Recovery.

PubMed

Paillard, Thierry; Kadri, Mohamed Abdelhafid; Nouar, Merbouha Boulahbel; Noé, Frederic

2018-05-02

Paillard, T, Kadri, MA, Nouar, MB, and Noé, F. Warm-up optimizes postural control but requires some minutes of recovery. J Strength Cond Res XX(X): 000-000, 2018-The aim was to compare monopedal postural control between the dominant leg (D-Leg) and the nondominant leg (ND-Leg) in pre- and post-warm-up conditions. Thirty healthy male sports science students were evaluated before and after a warm-up exercise (12 minutes of pedaling with an incremental effort on a cycle ergometer with a controlled workload). Monopodal postural control was assessed for the D- and ND-Legs before and immediately, 2, 5, 10, and 15 minutes after the warm-up exercise, using a force platform and calculating the displacement velocity of the center of foot pressure on the mediolateral (COPML velocity) and anteroposterior (COPAP velocity) axes. No significant difference was observed between the D-Leg and ND-Leg for both COPML and COPAP velocity in all the periods. In comparison with pre-warm-up, COPML decreased after 15-minute and 10-minute recovery periods for the D-Leg and the ND-Leg, respectively (p < 0.05), whereas COPAP decreased after 10-minute and 15-minute recovery periods (p < 0.001; p < 0.01, respectively) for the D-Leg, and after a 10-minute recovery period for the ND-Leg (p < 0.001). The warm-up optimized monopedal postural control but did not make it possible to distinguish a difference between the D-Leg and the ND-Leg. Some minutes of recovery are required between the end of the whole-body warm-up exercise and the beginning of the postural test to optimize postural control. The optimal duration of recovery turns out to be about 10-15 minutes.

Spectral imaging using consumer-level devices and kernel-based regression.

PubMed

Heikkinen, Ville; Cámara, Clara; Hirvonen, Tapani; Penttinen, Niko

2016-06-01

Hyperspectral reflectance factor image estimations were performed in the 400-700 nm wavelength range using a portable consumer-level laptop display as an adjustable light source for a trichromatic camera. Targets of interest were ColorChecker Classic samples, Munsell Matte samples, geometrically challenging tempera icon paintings from the turn of the 20th century, and human hands. Measurements and simulations were performed using Nikon D80 RGB camera and Dell Vostro 2520 laptop screen as a light source. Estimations were performed without spectral characteristics of the devices and by emphasizing simplicity for training sets and estimation model optimization. Spectral and color error images are shown for the estimations using line-scanned hyperspectral images as the ground truth. Estimations were performed using kernel-based regression models via a first-degree inhomogeneous polynomial kernel and a Matérn kernel, where in the latter case the median heuristic approach for model optimization and link function for bounded estimation were evaluated. Results suggest modest requirements for a training set and show that all estimation models have markedly improved accuracy with respect to the DE00 color distance (up to 99% for paintings and hands) and the Pearson distance (up to 98% for paintings and 99% for hands) from a weak training set (Digital ColorChecker SG) case when small representative training data were used in the estimation.

Modelling and simulation of effect of ultrasonic vibrations on machining of Ti6Al4V.

PubMed

Patil, Sandip; Joshi, Shashikant; Tewari, Asim; Joshi, Suhas S

2014-02-01

The titanium alloys cause high machining heat generation and consequent rapid wear of cutting tool edges during machining. The ultrasonic assisted turning (UAT) has been found to be very effective in machining of various materials; especially in the machining of "difficult-to-cut" material like Ti6Al4V. The present work is a comprehensive study involving 2D FE transient simulation of UAT in DEFORM framework and their experimental characterization. The simulation shows that UAT reduces the stress level on cutting tool during machining as compared to that of in continuous turning (CT) barring the penetration stage, wherein both tools are subjected to identical stress levels. There is a 40-45% reduction in cutting forces and about 48% reduction in cutting temperature in UAT over that of in CT. However, the reduction magnitude reduces with an increase in the cutting speed. The experimental analysis of UAT process shows that the surface roughness in UAT is lower than in CT, and the UATed surfaces have matte finish as against the glossy finish on the CTed surfaces. Microstructural observations of the chips and machined surfaces in both processes reveal that the intensity of thermal softening and shear band formation is reduced in UAT over that of in CT. Copyright © 2013 Elsevier B.V. All rights reserved.

Polyplanar optical display electronics

NASA Astrophysics Data System (ADS)

DeSanto, Leonard; Biscardi, Cyrus

1997-07-01

The polyplanar optical display (POD) is a unique display screen which can be used with any projection source. The prototype ten inch display is two inches thick and has a matte black face which allows for high contrast images. The prototype being developed is a form, fit and functional replacement display for the B-52 aircraft which uses a monochrome ten-inch display. In order to achieve a long lifetime, the new display uses a 100 milliwatt green solid- state laser at 532 nm as its light source. To produce real- time video, the laser light is being modulated by a digital light processing (DLP) chip manufactured by Texas Instruments. In order to use the solid-state laser as the light source and also fit within the constraints of the B-52 display, the digital micromirror device (DMD) circuit board is removed from the Texas Instruments DLP light engine assembly. Due to the compact architecture of the projection system within the display chassis, the DMD chip is operated remotely from the Texas Instruments circuit board. We discuss the operation of the DMD divorced from the light engine and the interfacing of the DMD board with various video formats including the format specific to the B-52 aircraft. A brief discussion of the electronics required to drive the laser is also presented.

Optimization of the polyplanar optical display electronics for a monochrome B-52 display

NASA Astrophysics Data System (ADS)

DeSanto, Leonard

1998-09-01

The Polyplanar Optical Display (POD) is a unique display screen which can be used with any projection source. The prototype ten-inch display is two inches thick and has a matte black face which allows for high contrast images. The prototype being developed is a form, fit and functional replacement display for the B-52 aircraft which uses a monochrome ten-inch display. In order to achieve a long lifetime, the new display uses a new 200 mW green solid-state laser (10,000 hr. life) at 532 nm as its light source. To produce real-time video, the laser light is being modulated by a Digital Light Processing (DLPTM) chip manufactured by Texas Instruments (TI). In order to use the solid-state laser as the light source and also fit within the constraints of the B-52 display, the Digital Micromirror Device (DMDTM) chip is operated remotely from the Texas Instruments circuit board. In order to achieve increased brightness a monochrome digitizing interface was investigated. The operation of the DMDTM divorced from the light engine and the interfacing of the DMDTM board with the RS-170 video format specific to the B-52 aircraft will be discussed, including the increased brightness of the monochrome digitizing interface. A brief description of the electronics required to drive the new 200 mW laser is also presented.

Rapid Separation of Copper Phase and Iron-Rich Phase From Copper Slag at Low Temperature in a Super-Gravity Field

NASA Astrophysics Data System (ADS)

Lan, Xi; Gao, Jintao; Huang, Zili; Guo, Zhancheng

2018-03-01

A novel approach for quickly separating a metal copper phase and iron-rich phase from copper slag at low temperature is proposed based on a super-gravity method. The morphology and mineral evolution of the copper slag with increasing temperature were studied using in situ high-temperature confocal laser scanning microscopy and ex situ scanning electron microscopy and X-ray diffraction methods. Fe3O4 particles dispersed among the copper slag were transformed into FeO by adding an appropriate amount of carbon as a reducing agent, forming the slag melt with SiO2 at low temperature and assisting separation of the copper phase from the slag. Consequently, in a super-gravity field, the metallic copper and copper matte were concentrated as the copper phase along the super-gravity direction, whereas the iron-rich slag migrated in the opposite direction and was quickly separated from the copper phase. Increasing the gravity coefficient (G) significantly enhanced the separation efficiency. After super-gravity separation at G = 1000 and 1473 K (1200 °C) for 3 minutes, the mass fraction of Cu in the separated copper phase reached 86.11 wt pct, while that in the separated iron-rich phase was reduced to 0.105 wt pct. The recovery ratio of Cu in the copper phase was as high as up to 97.47 pct.

Representation of Glossy Material Surface in Ventral Superior Temporal Sulcal Area of Common Marmosets

PubMed Central

Miyakawa, Naohisa; Banno, Taku; Abe, Hiroshi; Tani, Toshiki; Suzuki, Wataru; Ichinohe, Noritaka

2017-01-01

The common marmoset (Callithrix jacchus) is one of the smallest species of primates, with high visual recognition abilities that allow them to judge the identity and quality of food and objects in their environment. To address the cortical processing of visual information related to material surface features in marmosets, we presented a set of stimuli that have identical three-dimensional shapes (bone, torus or amorphous) but different material appearances (ceramic, glass, fur, leather, metal, stone, wood, or matte) to anesthetized marmoset, and recorded multiunit activities from an area ventral to the superior temporal sulcus (STS) using multi-shanked, and depth resolved multi-electrode array. Out of 143 visually responsive multiunits recorded from four animals, 29% had significant main effect only of the material, 3% only of the shape and 43% of both the material and the shape. Furthermore, we found neuronal cluster(s), in which most cells: (1) showed a significant main effect in material appearance; (2) the best stimulus was a glossy material (glass or metal); and (3) had reduced response to the pixel-shuffled version of the glossy material images. The location of the gloss-selective area was in agreement with previous macaque studies, showing activation in the ventral bank of STS. Our results suggest that perception of gloss is an important ability preserved across wide range of primate species. PMID:28367117

Representation of Glossy Material Surface in Ventral Superior Temporal Sulcal Area of Common Marmosets.

PubMed

Miyakawa, Naohisa; Banno, Taku; Abe, Hiroshi; Tani, Toshiki; Suzuki, Wataru; Ichinohe, Noritaka

2017-01-01

The common marmoset ( Callithrix jacchus ) is one of the smallest species of primates, with high visual recognition abilities that allow them to judge the identity and quality of food and objects in their environment. To address the cortical processing of visual information related to material surface features in marmosets, we presented a set of stimuli that have identical three-dimensional shapes (bone, torus or amorphous) but different material appearances (ceramic, glass, fur, leather, metal, stone, wood, or matte) to anesthetized marmoset, and recorded multiunit activities from an area ventral to the superior temporal sulcus (STS) using multi-shanked, and depth resolved multi-electrode array. Out of 143 visually responsive multiunits recorded from four animals, 29% had significant main effect only of the material, 3% only of the shape and 43% of both the material and the shape. Furthermore, we found neuronal cluster(s), in which most cells: (1) showed a significant main effect in material appearance; (2) the best stimulus was a glossy material (glass or metal); and (3) had reduced response to the pixel-shuffled version of the glossy material images. The location of the gloss-selective area was in agreement with previous macaque studies, showing activation in the ventral bank of STS. Our results suggest that perception of gloss is an important ability preserved across wide range of primate species.

KSC-99pp1380

NASA Image and Video Library

1999-12-02

KENNEDY SPACE CENTER, FLA. -- In the Space Station Processing Facility, members of the STS-102 crew pose with workers from Johnson Space Center in front of the Pressurized Mating Adapter (PMA-3), a component of the International Space Station (ISS). From left are Dave Moore (JSC), Susan J. Helms, Arne Aamodt (JSC), Yuriy Vladimirovich Usachev, Matt Myers (JSC) and James S. Voss. Voss, Helms and Usachev, known as the Expedition II crew, will be staying on the ISS, replacing the Expedition I crew, Bill Shepherd, Sergei Krikalev and Yuri Gidzenko. Along with the crew, Mission STS-102 also will be carrying the Leonardo Multi-Purpose Logistics Module (MPLM) to the ISS. The Leonardo will be filled with equipment and supplies to outfit the U.S. laboratory module, which will have been carried to the ISS on a preceding Shuttle flight. In order to function as an attached station module as well as a cargo transport, logistics modules (there are three) also include components that provide some life support, fire detection and suppression, electrical distribution and computer functions. Eventually, the modules also will carry refrigerator freezers for transporting experiment samples and food to and from the station. STS-102 is scheduled to launch no earlier than Oct. 19, 2000, from Launch Pad 39A, Kennedy Space Center

Process for cobalt separation and recovery in the presence of nickel from sulphate solutions by Cyanex 272

NASA Astrophysics Data System (ADS)

Park, Kyung-Ho; Mohapatra, Debasish

2006-10-01

The present paper deals with the extraction of cobalt from a solution containing cobalt and nickel in a sulphate medium similar to the leach liquor obtained by the dilute sulphuric acid pressure leaching of the Pacific Ocean nodules matte followed by copper extraction. The commercial extractant Cyanex 272 (bis (2, 4, 4-trimethylpentyl) phosphinic acid) is used for this purpose. The leach liquor used for the present study contains Co =1.78 g/L and Ni=16.78 g/L. Before cobalt extraction, impurities, such as copper and iron, are removed from the leach liquor by the precipitation method. Increasing the concentration of Cyanex 272 increased the extraction percentage of cobalt due to the increase of equilibrium pH. Cobalt extraction efficiency of >99.9 % is achieved with 0.20 M Cyanex 272 in two counter-current stages at an aqueous: organic (A:O) phase ratio of 1.5∶1. Complete stripping of cobalt from the loaded organic containing 2.73 g/L Co was carried out at pH 1.4 by a synthetic cobalt spent electrolyte in two stages at an A:O ratio of 1∶2. The enrichment of cobalt during extraction and stripping operations was about 3.5 times. A complete process flowsheet for the separation and recovery of cobalt is presented.

Effect of Sulfur on Liquidus Temperatures in the ZnO-"FeO"-Al2O3-CaO-SiO2-S System in Equilibrium with Metallic Iron

NASA Astrophysics Data System (ADS)

Zhao, Baojun; Hayes, Peter C.; Jak, Evgueni

2011-10-01

The phase equilibria in the ZnO-"FeO"-Al2O3-CaO-SiO2-S system have been determined experimentally in equilibrium with metallic iron. A pseudoternary section of the form ZnO-"FeO"-(Al2O3+CaO+SiO2) for CaO/SiO2 = 0.71 (weight), (CaO+SiO2)/Al2O3 = 5.0 (weight), and fixed 2.0 wt pct S concentration has been constructed. It was found that the addition of 2.0 wt pct S to the liquid extends the spinel primary phase field significantly and decreases the size of the wustite primary phase field. The liquidus temperature in the wustite primary phase field is decreased by approximately 80 K and the liquidus temperature in the spinel primary phase field is decreased by approximately 10 K with addition of 2.0 wt pct S in the composition range investigated. It was also found that iron-zinc sulfides are present in some samples in the spinel primary phase field, which are matte appearing at low zinc concentrations and sphalerite (Zn,Fe)S at higher zinc concentrations. The presence of sulfur in the slag has a minor effect on the partitioning of ZnO between the wustite and liquid phases but no effect on the partitioning of ZnO between the spinel and liquid phases.

n-Type silicon photoelectrochemistry in methanol: Design of a 10.1% efficient semiconductor/liquid junction solar cell

PubMed Central

Gronet, Chris M.; Lewis, Nathan S.; Cogan, George; Gibbons, James

1983-01-01

n-Type Si electrodes in MeOH solvent with 0.2 M (1-hydroxyethyl)ferrocene, 0.5 mM (1-hydroxyethyl)ferricenium, and 1.0 M LiClO4 exhibit air mass 2 conversion efficiencies of 10.1% for optical energy into electricity. We observe open-circuit voltages of 0.53 V and short-circuit quantum efficiencies for electron flow of nearly unity. The fill factor of the cell does not decline significantly with increases in light intensity, indicating substantial reduction in efficiency losses in MeOH solvent compared to previous nonaqueous n-Si systems. Matte etch texturing of the Si surface decreases surface reflectivity and increases photocurrent by 50% compared to shiny, polished Si samples. The high values of the open-circuit voltage observed are consistent with the presence of a thin oxide layer, as in a Schottky metal-insulator-semiconductor device, which yields decreased surface recombination and increased values of open-circuit voltage and short-circuit current. The n-Si system was shown to provide sustained photocurrent at air mass 2 levels (20 mA/cm2) for charge through the interface of >2,000 C/cm2. The n-Si/MeOH system represents a liquid junction cell that has exceeded the 10% barrier for conversion of optical energy into electricity. PMID:16593280

Rapid Separation of Copper Phase and Iron-Rich Phase From Copper Slag at Low Temperature in a Super-Gravity Field

NASA Astrophysics Data System (ADS)

Lan, Xi; Gao, Jintao; Huang, Zili; Guo, Zhancheng

2018-06-01

A novel approach for quickly separating a metal copper phase and iron-rich phase from copper slag at low temperature is proposed based on a super-gravity method. The morphology and mineral evolution of the copper slag with increasing temperature were studied using in situ high-temperature confocal laser scanning microscopy and ex situ scanning electron microscopy and X-ray diffraction methods. Fe3O4 particles dispersed among the copper slag were transformed into FeO by adding an appropriate amount of carbon as a reducing agent, forming the slag melt with SiO2 at low temperature and assisting separation of the copper phase from the slag. Consequently, in a super-gravity field, the metallic copper and copper matte were concentrated as the copper phase along the super-gravity direction, whereas the iron-rich slag migrated in the opposite direction and was quickly separated from the copper phase. Increasing the gravity coefficient (G) significantly enhanced the separation efficiency. After super-gravity separation at G = 1000 and 1473 K (1200 °C) for 3 minutes, the mass fraction of Cu in the separated copper phase reached 86.11 wt pct, while that in the separated iron-rich phase was reduced to 0.105 wt pct. The recovery ratio of Cu in the copper phase was as high as up to 97.47 pct.

User's guide for mapIMG 3--Map image re-projection software package

USGS Publications Warehouse

Finn, Michael P.; Mattli, David M.

2012-01-01

Version 0.0 (1995), Dan Steinwand, U.S. Geological Survey (USGS)/Earth Resources Observation Systems (EROS) Data Center (EDC)--Version 0.0 was a command line version for UNIX that required four arguments: the input metadata, the output metadata, the input data file, and the output destination path. Version 1.0 (2003), Stephen Posch and Michael P. Finn, USGS/Mid-Continent Mapping Center (MCMC--Version 1.0 added a GUI interface that was built using the Qt library for cross platform development. Version 1.01 (2004), Jason Trent and Michael P. Finn, USGS/MCMC--Version 1.01 suggested bounds for the parameters of each projection. Support was added for larger input files, storage of the last used input and output folders, and for TIFF/ GeoTIFF input images. Version 2.0 (2005), Robert Buehler, Jason Trent, and Michael P. Finn, USGS/National Geospatial Technical Operations Center (NGTOC)--Version 2.0 added Resampling Methods (Mean, Mode, Min, Max, and Sum), updated the GUI design, and added the viewer/pre-viewer. The metadata style was changed to XML and was switched to a new naming convention. Version 3.0 (2009), David Mattli and Michael P. Finn, USGS/Center of Excellence for Geospatial Information Science (CEGIS)--Version 3.0 brings optimized resampling methods, an updated GUI, support for less than global datasets, UTM support and the whole codebase was ported to Qt4.

Visual ergonomic aspects of glare on computer displays: glossy screens and angular dependence

NASA Astrophysics Data System (ADS)

Brunnström, Kjell; Andrén, Börje; Konstantinides, Zacharias; Nordström, Lukas

2007-02-01

Recently flat panel computer displays and notebook computer are designed with a so called glare panel i.e. highly glossy screens, have emerged on the market. The shiny look of the display appeals to the costumers, also there are arguments that the contrast, colour saturation etc improves by using a glare panel. LCD displays suffer often from angular dependent picture quality. This has been even more pronounced by the introduction of Prism Light Guide plates into displays for notebook computers. The TCO label is the leading labelling system for computer displays. Currently about 50% of all computer displays on the market are certified according to the TCO requirements. The requirements are periodically updated to keep up with the technical development and the latest research in e.g. visual ergonomics. The gloss level of the screen and the angular dependence has recently been investigated by conducting user studies. A study of the effect of highly glossy screens compared to matt screens has been performed. The results show a slight advantage for the glossy screen when no disturbing reflexes are present, however the difference was not statistically significant. When disturbing reflexes are present the advantage is changed into a larger disadvantage and this difference is statistically significant. Another study of angular dependence has also been performed. The results indicates a linear relationship between the picture quality and the centre luminance of the screen.

The defective nature of ice Ic and its implications for atmospheric science

NASA Astrophysics Data System (ADS)

Kuhs, W. F.; Hansen, T. C.

2009-04-01

) Evidence that nitric acid increases relative humidity in low-temperature cirrus clouds. Science 303, 516-520. [4] T Peter, C Marcolli, P Spaichinger, T Corti, MC Baker & T Koop (2006) When dry air is too humid. Science 314, 1399-1402. [5] JE Shilling, MA Tolbert, OB Toon, EJ Jensen, BJ Murray & AK Bertram (2006) Measurements of the vapor pressure of cubic ice and their implications for atmospheric ice clouds. Geophys.Res.Lett. 33, 026671. [6] TC Hansen, MM Koza & WF Kuhs (2008) Formation and annealing of cubic ice: I Modelling of stacking faults. J.Phys.Cond.Matt. 20, 285104. [7] TC Hansen, MM Koza, P Lindner & WF Kuhs (2008) Formation and annealing of cubic ice: II. Kinetic study. J.Phys.Cond.Matt. 20, 285105. [8] WF Kuhs, G Genov, DK Staykova & AN Salamatin (2004) Ice perfection and the onset of anomalous preservation of gas hydrates. Phys.Chem.Chem.Phys. 6, 4917-4920. [9] BJ Murray, DA Knopf & AK Bertram (2005) The formation of cubic ice under conditions relevant to Earth's atmosphere. Nature 434, 292-205.

Nanoscale variations in 187Os isotopic composition and HSE systematics in a Bultfontein peridotite

NASA Astrophysics Data System (ADS)

Wainwright, A. N.; Luguet, A.; Schreiber, A.; Fonseca, R. O. C.; Nowell, G. M.; Lorand, J.-P.; Wirth, R.; Janney, P. E.

2016-08-01

percolation. While the high solubility of HSE within sulphide mattes rules out early formation of the alloys from a S-undersaturated silicate melt and subsequent scavenging in a sulphide matte, the alignment of the Pt-Fe-alloy inclusions attests that they are exsolutions formed during the sub-solidus re-equilibration of the high temperature sulphide phases. The significant difference in 187Os/188Os composition between the included Pt-Fe-alloys and their BMS host can only be accounted for by different Re/Os. This suggests that the formation of Pt-Fe-alloy inclusions within a BMS can result in the fractionation of Re from Os. A survey experiment examining the partitioning of Re and Os confirmed this observation, with the Re/Os of the Pt-Fe-alloy inclusion up to ten times higher than the co-existing BMS. This fractionation implies that, when Re is present in the sulphide melt, the TRD ages of BMS containing alloy inclusions do not date the loss of Re due to partial melting, but rather its fractionation into the Pt-Fe-alloys. As such, BMS ages should be used with caution when dating ancient partial melting events.

Surface gloss and color perception of 3D objects.

PubMed

Xiao, Bei; Brainard, David H

2008-01-01

Two experiments explore the color perception of objects in complex scenes. The first experiment examines the color perception of objects across variation in surface gloss. Observers adjusted the color appearance of a matte sphere to match that of a test sphere. Across conditions we varied the body color and glossiness of the test sphere. The data indicate that observers do not simply match the average light reflected from the test. Indeed, the visual system compensates for the physical effect of varying the gloss, so that appearance is stabilized relative to what is predicted by the spatial average. The second experiment examines how people perceive color across locations on an object. We replaced the test sphere with a soccer ball that had one of its hexagonal faces colored. Observers were asked to adjust the match sphere have the same color appearance as this test patch. The test patch could be located at either an upper or lower location on the soccer ball. In addition, we varied the surface gloss of the entire soccer ball (including the test patch). The data show that there is an effect of test patch location on observers' color matching, but this effect is small compared to the physical change in the average light reflected from the test patch across the two locations. In addition, the effect of glossy highlights on the color appearance of the test patch was consistent with the results from Experiment 1.

Environmental qualification of the MH-53J color multifunction display

NASA Astrophysics Data System (ADS)

Malia, Timothy E.

1996-05-01

In early 1994, Loral Federal Systems Owego (LFS-O) was awarded the MH-53J Interactive Defensive Avionics System/Multi-Mission Advanced Tactical Terminal (IDAS/MATT) upgrade program as prime contractor. The MH-53J is a USAF special operations helicopter providing infiltration and exfiltration mission capability in a low-slow manner. One element the upgrade was a new digital map system (DMS), which consists of a 2 GB digital memory unit (DMU), a digital map computer (DMC) and a 6' by 8' color multi-function display (CMFD). Although the original specification was written for a CRT, Loral determined that an active matrix liquid crystal display (AMLCD) based solution would better achieve the mission goals. The display upgrade was not intended to be a development program, but LFS-O found that there were very few solutions available near term, and chose to develop the display in Owego, making it their first military AMLCD production program. The CMFD is based on a commercial liquid crystal display manufactured by Display Technologies Incorporated (DTI), a joint venture of IBM and Toshiba. In March of 1995, just nine months after the design started, LFS-O delivered the first CMFD for systems integration. In December 1995, LFS-O successfully completed the environmental qualification of the CMFD. The extensive testing unearthed several initial deficiencies in the thermal, vibration, humidity salt fog and EMI design. This paper discusses these challenges and how they were overcome to achieve compliance with the USAF requirements.

Additive manufacturing of tools for lapping glass

NASA Astrophysics Data System (ADS)

Williams, Wesley B.

2013-09-01

Additive manufacturing technologies have the ability to directly produce parts with complex geometries without the need for secondary processes, tooling or fixtures. This ability was used to produce concave lapping tools with a VFlash 3D printer from 3D Systems. The lapping tools were first designed in Creo Parametric with a defined constant radius and radial groove pattern. The models were converted to stereolithography files which the VFlash used in building the parts, layer by layer, from a UV curable resin. The tools were rotated at 60 rpm and used with 120 grit and 220 grit silicon carbide lapping paste to lap 0.750" diameter fused silica workpieces. The samples developed a matte appearance on the lapped surface that started as a ring at the edge of the workpiece and expanded to the center. This indicated that as material was removed, the workpiece radius was beginning to match the tool radius. The workpieces were then cleaned and lapped on a second tool (with equivalent geometry) using a 3000 grit corundum aluminum oxide lapping paste, until a near specular surface was achieved. By using lapping tools that have been additively manufactured, fused silica workpieces can be lapped to approach a specified convex geometry. This approach may enable more rapid lapping of near net shape workpieces that minimize the material removal required by subsequent polishing. This research may also enable development of new lapping tool geometry and groove patterns for improved loose abrasive finishing.

Sensitivity of titanium brackets to the corrosive influence of fluoride-containing toothpaste and tea.

PubMed

Harzer, W; Schröter, A; Gedrange, T; Muschter, F

2001-08-01

Titanium brackets are used in orthodontic patients with an allergy to nickel and other specific substances. In recent studies, the corrosive properties of fluoride-containing toothpastes with different pH values were investigated. The present in vivo study tested how the surfaces of titanium brackets react to the corrosive influence of acidic fluoride-containing toothpaste during orthodontic treatment. Molar bands were placed on 18 orthodontic patients. In these same patients, titanium brackets were bonded on the left quadrants and stainless steel brackets on the right quadrants of the upper and lower arches. Fifteen patients used Gel Kam containing soluble tin fluoride (pH 3.2), whereas 3 used fluoride-free toothpaste. The brackets were removed for evaluation by light microscopy and scanning microscopy 5.5 to 7.0 months and 7.5 to 17 months after bonding. The quality and quantity of elements present were measured by scanning microscopy. Macroscopic evaluation showed the matte gray color of titanium brackets dominating over the silver gleam of the steel brackets. The plaque accumulation on titanium brackets is high because of the very rough surface. Pitting and crevices were observed in only 3 of the 165 brackets tested. The present in vivo investigation confirms the results of in vitro studies, but the changes are so minor that titanium brackets can safely be used for up to 18 months. Wing surfaces should be improved by modifying the manufacturing process.

Surface gloss and color perception of 3D objects

PubMed Central

Xiao, Bei; Brainard, David H.

2008-01-01

Two experiments explore the color perception of objects in complex scenes. The first experiment examines the color perception of objects across variation in surface gloss. Observers adjusted the color appearance of a matte sphere to match that of a test sphere. Across conditions we varied the body color and glossiness of the test sphere. The data indicate that observers do not simply match the average light reflected from the test. Indeed, the visual system compensates for the physical effect of varying the gloss, so that appearance is stabilized relative to what is predicted by the spatial average. The second experiment examines how people perceive color across locations on an object. We replaced the test sphere with a soccer ball that had one of its hexagonal faces colored. Observers were asked to adjust the match sphere have the same color appearance as this test patch. The test patch could be located at either an upper or lower location on the soccer ball. In addition, we varied the surface gloss of the entire soccer ball (including the test patch). The data show that there is an effect of test patch location on observers’ color matching, but this effect is small compared to the physical change in the average light reflected from the test patch across the two locations. In addition, the effect of glossy highlights on the color appearance of the test patch was consistent with the results from Experiment 1. PMID:18598406

Scanning electron microscopic and histologic evaluation of the AcrySof SA30AL acrylic intraocular lens. Manufacturing quality and morphology in the capsular bag.

PubMed

Escobar-Gomez, Marcela; Apple, David J; Vargas, Luis G; Werner, Liliana; Arthur, Stella N; Pandey, Suresh K; Izak, Andrea M; Schmidbauer, Josef M

2003-01-01

To evaluate the properties of the AcrySof(R) SA30AL (Alcon Laboratories, Inc.) single-piece foldable posterior chamber intraocular lens (IOL). Center for Research on Ocular Therapeutics and Biodevices, Storm Eye Institute, Medical University of South Carolina, Charleston, South Carolina, USA. Two nonimplanted clinical-quality AcrySof IOLs were examined by gross, light, and scanning electron microscopy (SEM). In addition, 2 eyes implanted with this IOL obtained post-mortem, the first such eyes accessioned in our laboratory and the first described to date, were examined using the Miyake-Apple posterior photographic technique and by histologic sections. Scanning electron microscopy of the SA30AL IOL showed excellent surface finish. The edge of the optic was square (truncated) and had a matte (velvet or ground-glass) appearance, a feature that may minimize edge glare and other visual phenomena. A well-fabricated square or truncated optic edge was demonstrated. Miyake-Apple analysis revealed that the SA30AL IOL showed appropriate fit and configuration within the capsular bag. Histologic correlation of the IOL's square edge and its relation to the capsular bag and adjacent Soemmering's ring were noted. The AcrySof SA30AL IOL is a well-fabricated lens that situates well in the capsular bag. The truncated optic and its relationship to adjacent structures show a morphological profile that has been shown to be highly efficacious in reducing the rate of posterior capsule opacification.

Pilot study on which foods should be avoided by patients with psoriasis.

PubMed

Festugato, Moira

2011-01-01

FUNDAMENT: Psoriasis is a chronic inflammatory systemic disease mediated by immune factors. We will explore the foods that act on these factors contributing to psoriasis. As a systemic disease, which shares the same pathophysiological substrate with other comorbidities, diet also leads to worsening of comorbidities. To indicate a group of foods that can act as a factor of manifestation and/or aggravation of psoriasis and, at the same time, enable strategies for individuals to introduce these foods to their diet. 43 patients with various forms of psoriasis (excluding pustular and erythrodermic psoriasis) were selected and answered a questionnaire about their eating habits in the first visit, with special attention to the consumption of black coffee, black tea, chocolate, yerba mate, pepper, smoked foods, beef and flavor enhancer (monosodium glutamate). Next, the patient was instructed to suspend alcoholic drinks and tobacco. Beef is the most consumed food by patients followed by MSG (monosodium glutamate), which exists in processed foods, yerba matte, black coffee, chocolate, smoked foods, pepper and black tea. 88.37% noticed reduced scaling and erythema, milder outbreaks during the year and improved quality of life; 11.63% (5 patients) did not notice any effects on the skin. We found poor dietary intake in patients with psoriasis. In addition to receiving proper scientific advice, patients need to be educated regarding their eating habits for a better quality of life and as an adjuvant to the drug therapy.

Micro-wear features on unique 100-Mrad cups: two retrieved cups compared to hip simulator wear study.

PubMed

Yamamoto, Kengo; Masaoka, Toshinori; Manaka, Masakazu; Oonishi, Hironobu; Clarke, Ian; Shoji, Hiromu; Kawanabe, Keiichi; Imakiire, Atsuhiro

2004-04-01

We studied the micro-wear phenomena of unique, extensively cross-linked polyethylene cups (cross-linked with 1,000 kGy-irradiation) that had been used briefly in Japan. Two retrievals (at 15 years) came from the Japanese "SOM" hip system (implanted 1971-78). These were compared to a set of 0 kGy and 500-1,500 kGy cups run in our hip simulator. The polyethylene cups that had not been cross-linked had the greatest wear. The worn areas had a burnished appearance and were clearly separated from the unworn region by a distinct ridge-line. The worn areas had lost all machine tracks, showed a large amount of UHMWPE 'flow', and long PE fibrils. The associated surface rippling was degraded. These features were considered synonymous with severe polyethylene wear. In contrast, the worn areas in the very cross-linked cups had a visibly matte surface and no ridge-line. Micro-examination showed that the machine tracks were still present. Ripple formations were less obvious than in the cups that were not cross-linked, polyethylene surface fibrils were scarcer and all the fibrils were much smaller than in the cups that were not crosslinked. Our two retrieved cups and the simulator cups confirmed the greater wear-resistance of very cross-linked polyethylene. It should also be noted that the SOM cup design and processing were unique and differed greatly from that of modern polyethylene cups.

Contextualising primate origins--an ecomorphological framework.

PubMed

Soligo, Christophe; Smaers, Jeroen B

2016-04-01

Ecomorphology - the characterisation of the adaptive relationship between an organism's morphology and its ecological role - has long been central to theories of the origin and early evolution of the primate order. This is exemplified by two of the most influential theories of primate origins: Matt Cartmill's Visual Predation Hypothesis, and Bob Sussman's Angiosperm Co-Evolution Hypothesis. However, the study of primate origins is constrained by the absence of data directly documenting the events under investigation, and has to rely instead on a fragmentary fossil record and the methodological assumptions inherent in phylogenetic comparative analyses of extant species. These constraints introduce particular challenges for inferring the ecomorphology of primate origins, as morphology and environmental context must first be inferred before the relationship between the two can be considered. Fossils can be integrated in comparative analyses and observations of extant model species and laboratory experiments of form-function relationships are critical for the functional interpretation of the morphology of extinct species. Recent developments have led to important advancements, including phylogenetic comparative methods based on more realistic models of evolution, and improved methods for the inference of clade divergence times, as well as an improved fossil record. This contribution will review current perspectives on the origin and early evolution of primates, paying particular attention to their phylogenetic (including cladistic relationships and character evolution) and environmental (including chronology, geography, and physical environments) contextualisation, before attempting an up-to-date ecomorphological synthesis of primate origins. © 2016 Anatomical Society.

HUBBLE CAPTURES UNVEILING OF PLANETARY NEBULA

NASA Technical Reports Server (NTRS)

2002-01-01

This Wide Field and Planetary Camera 2 image captures the infancy of the Stingray nebula (Hen-1357), the youngest known planetary nebula. In this image, the bright central star is in the middle of the green ring of gas. Its companion star is diagonally above it at 10 o'clock. A spur of gas (green) is forming a faint bridge to the companion star due to gravitational attraction. The image also shows a ring of gas (green) surrounding the central star, with bubbles of gas to the lower left and upper right of the ring. The wind of material propelled by radiation from the hot central star has created enough pressure to blow open holes in the ends of the bubbles, allowing gas to escape. The red curved lines represent bright gas that is heated by a 'shock' caused when the central star's wind hits the walls of the bubbles. The nebula is as large as 130 solar systems, but, at its distance of 18,000 light-years, it appears only as big as a dime viewed a mile away. The Stingray is located in the direction of the southern constellation Ara (the Altar). The colors shown are actual colors emitted by nitrogen (red), oxygen (green), and hydrogen (blue). The filters used were F658N ([N II]), F502N ([O III]), and F487N (H-beta). The observations were made in March 1996. Credit: Matt Bobrowsky, Orbital Sciences Corporation and NASA

An under-active or over-active internal world? An exploration of parallel dynamics within psyche and soma, and the difficulty of internal regulation, in patients with Chronic Fatigue Syndrome and Myalgic Encephalomyelitis.

PubMed

Driver, Christine

2005-04-01

This paper explores the dynamics brought into analytic work when there is a symmetric fusion between psyche and soma within the patient. It will consider how such a fusion may emerge from reverberations between physical constitution and a lack of maternal attunement, containment and reflective function. I will describe the work with a patient, Jane, who was diagnosed with Myalgic Encephalomyelitis (ME) during the course of her analysis. The dynamic of her physical symptoms within the analytic work, and the impact of her internal affects and internal 'objects' within the transference and countertransference, indicated a difficulty in finding an homeostatic balance resulting in overactivity and underactivity at both somatic and psychological levels. Using the clinical work with Jane this paper will also examine the interrelationship between mother-infant attachment, an inadequate internalized maternal reflective function, affect dysregulation, unconscious fusion, the lack of psyche-soma differentiation and the impact of the latter in relation to internal regulation systems, or lack of, in patients with Chronic Fatigue Syndrome (CFS) and Myalgic Encephalomyelitis (ME). I will draw on similar work carried out by Holland (1997), Simpson (1997) and Simpson et al. (1997). The paper will also employ the concept of the reflective function (Fonagy 2001; Knox 2003), and consider Matte-Blanco's (1999) concepts of generalization and unconscious symmetry in relation to the patient's internal world. I go on to consider how analysis provides a point outside the 'fusion' that can enable the 'deadlock' to be broken.

ACIR: automatic cochlea image registration

NASA Astrophysics Data System (ADS)

Al-Dhamari, Ibraheem; Bauer, Sabine; Paulus, Dietrich; Lissek, Friedrich; Jacob, Roland

2017-02-01

Efficient Cochlear Implant (CI) surgery requires prior knowledge of the cochlea's size and its characteristics. This information helps to select suitable implants for different patients. To get these measurements, a segmentation method of cochlea medical images is needed. An important pre-processing step for good cochlea segmentation involves efficient image registration. The cochlea's small size and complex structure, in addition to the different resolutions and head positions during imaging, reveals a big challenge for the automated registration of the different image modalities. In this paper, an Automatic Cochlea Image Registration (ACIR) method for multi- modal human cochlea images is proposed. This method is based on using small areas that have clear structures from both input images instead of registering the complete image. It uses the Adaptive Stochastic Gradient Descent Optimizer (ASGD) and Mattes's Mutual Information metric (MMI) to estimate 3D rigid transform parameters. The use of state of the art medical image registration optimizers published over the last two years are studied and compared quantitatively using the standard Dice Similarity Coefficient (DSC). ACIR requires only 4.86 seconds on average to align cochlea images automatically and to put all the modalities in the same spatial locations without human interference. The source code is based on the tool elastix and is provided for free as a 3D Slicer plugin. Another contribution of this work is a proposed public cochlea standard dataset which can be downloaded for free from a public XNAT server.

Polyplanar optical display electronics

DOE Office of Scientific and Technical Information (OSTI.GOV)

DeSanto, L.; Biscardi, C.

The Polyplanar Optical Display (POD) is a unique display screen which can be used with any projection source. The prototype ten inch display is two inches thick and has a matte black face which allows for high contrast images. The prototype being developed is a form, fit and functional replacement display for the B-52 aircraft which uses a monochrome ten-inch display. In order to achieve a long lifetime, the new display uses a 100 milliwatt green solid-state laser (10,000 hr. life) at 532 nm as its light source. To produce real-time video, the laser light is being modulated by amore » Digital Light Processing (DLP{trademark}) chip manufactured by Texas Instruments. In order to use the solid-state laser as the light source and also fit within the constraints of the B-52 display, the Digital Micromirror Device (DMD{trademark}) circuit board is removed from the Texas Instruments DLP light engine assembly. Due to the compact architecture of the projection system within the display chassis, the DMD{trademark} chip is operated remotely from the Texas Instruments circuit board. The authors discuss the operation of the DMD{trademark} divorced from the light engine and the interfacing of the DMD{trademark} board with various video formats (CVBS, Y/C or S-video and RGB) including the format specific to the B-52 aircraft. A brief discussion of the electronics required to drive the laser is also presented.« less

Optimization of the polyplanar optical display electronics for a monochrome B-52 display

DOE Office of Scientific and Technical Information (OSTI.GOV)

DeSanto, L.

The Polyplanar Optical Display (POD) is a unique display screen which can be used with any projection source. The prototype ten-inch display is two inches thick and has a matte black face which allows for high contrast images. The prototype being developed is a form, fit and functional replacement display for the B-52 aircraft which uses a monochrome ten-inch display. In order to achieve a long lifetime, the new display uses a new 200 mW green solid-state laser (10,000 hr. life) at 532 nm as its light source. To produce real-time video, the laser light is being modulated by amore » Digital Light Processing (DLP{trademark}) chip manufactured by Texas Instruments (TI). In order to use the solid-state laser as the light source and also fit within the constraints of the B-52 display, the Digital Micromirror Device (DMD{trademark}) chip is operated remotely from the Texas Instruments circuit board. In order to achieve increased brightness a monochrome digitizing interface was investigated. The operation of the DMD{trademark} divorced from the light engine and the interfacing of the DMD{trademark} board with the RS-170 video format specific to the B-52 aircraft will be discussed, including the increased brightness of the monochrome digitizing interface. A brief description of the electronics required to drive the new 200 mW laser is also presented.« less

Correlation between the Palaeozoic structures from West Iberian and Grand Banks margins using inversion of magnetic anomalies

NASA Astrophysics Data System (ADS)

Silva, Elsa A.; Miranda, J. M.; Luis, J. F.; Galdeano, A.

2000-05-01

The Ibero-Armorican Arc (IAA) is a huge geological structure of Pre-Cambrian origin, tightened during hercynian times and deeply affected by the opening of the Atlantic Ocean and the Bay of Biscay. Its remnants now lie in Iberia, north-western France and the Canadian Grand Banks margins. The qualitative correlation between these three blocks has been attempted by several authors (e.g. Lefort, J.P., 1980. Un 'Fit' structural de l'Atlantique Nord: arguments geologiques pour correler les marqueurs geophysiques reconnus sur les deux marges. Mar. Geol. 37, 355-369; Lefort, J.P., 1983. A new geophysical criterion to correlate the Acadian and Hercynian orogenies of Western Europe and Eastern America. Mem. Geol. Soc. Am. 158, 3-18; Galdeano, A., Miranda, J.M., Matte, P., Mouge, P., Rossignol, C., 1990. Aeromagnetic data: A tool for studying the Variscan arc of Western Europe and its correlation with transatlantic structures. Tectonophysics 177, 293-305) using magnetic anomalies, mainly because they seem to preserve the hercynian zonation, in spite of the strong thermal and mechanical processes that took place during rifting and ocean spreading. In this paper, we present a new contribution to the study of the IAA structure based on the processing of a compilation of magnetic data from Iberia and Grand Banks margins. To interpret the magnetic signature, a Fourier-domain-based inversion technique was applied, considering a layer with a constant thickness of 10 km, and taking into account only the induced field. The digital terrain model was derived from ETOPO5 (ETOPO5, 1986. Relief map of the earth's surface. EOS 67, 121) and TerrainBase (TerrainBase, 1995. In: Row III, L.W., Hastings, D.A., Dunbar, P.K. (Eds.), Worldwide Digital Terrain Data, Documentation Manual, CD-ROM Release 1.0. GEODAS-NGDC Key to Geophysical Records. Documentation N. 30, April) databases. The pseudo-susceptibility distribution obtained was repositioned for the 156.5 Ma epoch, using the Srivastava and

The time-dependence of the defective nature of ice Ic (cubic ice) and its implications for atmospheric science

NASA Astrophysics Data System (ADS)

Sippel, Christian; Koza, Michael M.; Hansen, Thomas C.; Kuhs, Werner F.

2010-05-01

flat low-indexed crystal faces. [1] T Kobayashi & T Kuroda (1987) Snow Crystals. In: Morphology of Crystals (ed. I Sunagawa), Terra Scientific Publishing, Tokyo, pp.649-743. [2] RS Gao & 19 other authors (2004) Evidence that nitric acid increases relative humidity in low-temperature cirrus clouds. Science 303, 516-520. [3] T Peter, C Marcolli, P Spichtinger, T Corti, MC Baker & T Koop (2006) When dry air is too humid. Science 314, 1399-1402. [4] JE Shilling, MA Tolbert, OB Toon, EJ Jensen, BJ Murray & AK Bertram (2006) Measurements of the vapor pressure of cubic ice and their implications for atmospheric ice clouds. Geophys.Res.Lett. 33, 026671. [5] TC Hansen, MM Koza & WF Kuhs (2008) Formation and annealing of cubic ice: I Modelling of stacking faults. J.Phys.Cond.Matt. 20, 285104. [6] TC Hansen, MM Koza, P Lindner & WF Kuhs (2008) Formation and annealing of cubic ice: II. Kinetic study. J.Phys.Cond.Matt. 20, 285105. [7] WF Kuhs, G Genov, DK Staykova & AN Salamatin, T Hansen (2004) Ice perfection and the onset of anomalous preservation of gas hydrates. Phys.Chem.Chem.Phys. 6, 4917-4920. [8] BJ Murray, DA Knopf & AK Bertram (2005) The formation of cubic ice under conditions relevant to Earth's atmosphere. Nature 434, 292-205.

Metrological issues related to BRDF measurements around the specular direction in the particular case of glossy surfaces

NASA Astrophysics Data System (ADS)

Obein, Gaël.; Audenaert, Jan; Ged, Guillaume; Leloup, Frédéric B.

2015-03-01

Among the complete bidirectional reflectance distribution function (BRDF), visual gloss is principally related to physical reflection characteristics located around the specular reflection direction. This particular part of the BRDF is usually referred to as the specular peak. A good starting point for the physical description of gloss could be to measure the reflection properties around this specular peak. Unfortunately, such a characterization is not trivial, since for glossy surfaces the width of the specular peak can become very narrow (typically a full width at half maximum inferior to 0.5° is encountered). In result, new BRDF measurement devices with a very small solid angle of detection are being introduced. Yet, differences in the optical design of BRDF measurement instruments engender different measurement results for the same specimen, complicating direct comparison of the measurement results. This issue is addressed in this paper. By way of example, BRDF measurement results of two samples, one being matte and the other one glossy, obtained by use of two high level goniospectrophotometers with a different optical design, are described. Important discrepancies in the results of the glossy sample are discussed. Finally, luminance maps obtained from renderings with the acquired BRDF data are presented, exemplifying the large visual differences that might be obtained. This stresses the metrological aspects that must be known for using BRDF data. Indeed, the comprehension of parameters affecting the measurement results is an inevitable step towards progress in the metrology of surface gloss, and thus towards a better metrology of appearance in general.

Spectroscopic characterisation of moonmilk deposits in Pozalagua tourist Cave (Karrantza, Basque Country, North of Spain)

NASA Astrophysics Data System (ADS)

Martínez-Arkarazo, I.; Angulo, M.; Zuloaga, O.; Usobiaga, A.; Madariaga, J. M.

2007-12-01

Composition of moonmilk deposits located in different zones of the tourist Dolomite Cave of Pozalagua (Karrantza, Basque Country, North of Spain) was established by Raman spectroscopy. The deposits were located in column bases and detached rocks near a gour full of water or a dripping zone. Hydromagnesite (Mg 5(CO 3) 4(OH) 2·4H 2O) with a strong Raman band at 1116 cm -1 and weaker ones at 1522vw, 1487vw, 1452vw, 756w, 727w, 466w, 434w, 371w, 327m, 291w, 258w, 247vw and 230 m cm -1 was found as the main component of the moonmilk. Aragonite is the unique calcium carbonate compound that sometimes composes the moonmilk but always together with the hydromagnesite. Among non-carbonate minerals, some nitrates (nitrocalcite, niter, nitromagnesite, nitratine and gwihabaite) and sulphates (arkanite) were also identified as minor compounds. Most of the deposits were matt white and pasty, but occasionally some samples appear greyish on the surface. In these samples, carbon particles were also found, apart from the above, and Raman shift changes were observed in the hydromagnesite spectra. Apart from the elements involved in the mentioned minerals, Si, Fe, Mn, Zn and Ti were identified by X-ray microfluorescence as trace elements and the results were correlated with mineral compositions found by Raman measurements. Furthermore, quantification of the soluble salts of moonmilk deposits was carried out by ionic chromatography and the results were chemometrically treated to find correlations among soluble ions and the composition of the mineral phases spectroscopically characterised.

Resistance of European tree species to drought stress in mixed versus pure forests: evidence of stress release by inter-specific facilitation.

PubMed

Pretzsch, H; Schütze, G; Uhl, E

2013-05-01

While previous studies focused on tree growth in pure stands, we reveal that tree resistance and resilience to drought stress can be modified distinctly through species mixing. Our study is based on tree ring measurement on cores from increment boring of 559 trees of Norway spruce (Picea abies [L.] Karst.), European beech (Fagus sylvatica [L.]) and sessile oak (Quercus petraea (Matt.) Liebl.) in South Germany, with half sampled in pure, respectively, mixed stands. Indices for resistance, recovery and resilience were applied for quantifying the tree growth reaction on the episodic drought stress in 1976 and 2003. The following general reaction patterns were found. (i) In pure stands, spruce has the lowest resistance, but the quickest recovery; oak and beech were more resistant, but recover was much slower and they are less resilient. (ii) In mixture, spruce and oak perform as in pure stands, but beech was significantly more resistant and resilient than in monoculture. (iii) Especially when mixed with oak, beech is facilitated. We hypothesise that the revealed water stress release of beech emerges in mixture because of the asynchronous stress reaction pattern of beech and oak and a facilitation of beech by hydraulic lift of water by oak. This facilitation of beech in mixture with oak means a contribution to the frequently reported overyield of beech in mixed versus pure stands. We discuss the far-reaching implications that these differences in stress response under intra- and inter-specific environments have for forest ecosystem dynamics and management under climate change. © 2012 German Botanical Society and The Royal Botanical Society of the Netherlands.

Biochemical characterization and analysis of the transforming potential of the FLT3/FLK2 receptor tyrosine kinase.

PubMed

Maroc, N; Rottapel, R; Rosnet, O; Marchetto, S; Lavezzi, C; Mannoni, P; Birnbaum, D; Dubreuil, P

1993-04-01

We recently cloned an additional member of the receptor type tyrosine kinase class III. This new gene, called Flt3 by our group [Rosnet, O., Matteï, M.G., Marchetto, S. & Birnbaum, D. (1991). Genomics, 9, 380-385; Rosnet, O., Marchetto, S., deLapeyriere, O. & Birnbaum, D. (1991). Oncogene, 6, 1641-1650] and Flk2 by others [Matthews, W., Jordan, C.T., Wieg, G.W., Pardoll, D. & Lemischka, I.R. (1991). Cell, 65, 1143-1152] is strongly related to the important developmental genes Kit, Fms and Pdgfr. The murine 3.2-kb full-length cDNA, when introduced into COS-1 cells, shows the expression of two polypeptides with apparent molecular weights of 155 kDa and 132 kDa. Treatment of cells with N-linked glycosylation inhibitors results in the expression of a 110-kDa protein. We have shown that FLT3 contains an intrinsic tyrosine kinase activity. A point mutation in a highly conserved residue within the phosphoryltransferase domain inactivates the catalytic function of this receptor, whereas activation by way of a chimeric molecule between the ligand-binding domain of colony-stimulating factor type 1 (CSF-1) receptor (CSF-1R) and the kinase domain of FLT3 results, in the presence of CSF-1, in the development of the transforming activity of this receptor as shown by anchorage-independent cell growth. Finally, expression analysis of the FLT3 protein shows that, in addition to the hematopoietic system, FLT3 is strongly expressed in neural, gonadal, hepatic and placental tissues in the mouse.

Optimal atlas construction through hierarchical image registration

NASA Astrophysics Data System (ADS)

Grevera, George J.; Udupa, Jayaram K.; Odhner, Dewey; Torigian, Drew A.

2016-03-01

Atlases (digital or otherwise) are common in medicine. However, there is no standard framework for creating them from medical images. One traditional approach is to pick a representative subject and then proceed to label structures/regions of interest in this image. Another is to create a "mean" or average subject. Atlases may also contain more than a single representative (e.g., the Visible Human contains both a male and a female data set). Other criteria besides gender may be used as well, and the atlas may contain many examples for a given criterion. In this work, we propose that atlases be created in an optimal manner using a well-established graph theoretic approach using a min spanning tree (or more generally, a collection of them). The resulting atlases may contain many examples for a given criterion. In fact, our framework allows for the addition of new subjects to the atlas to allow it to evolve over time. Furthermore, one can apply segmentation methods to the graph (e.g., graph-cut, fuzzy connectedness, or cluster analysis) which allow it to be separated into "sub-atlases" as it evolves. We demonstrate our method by applying it to 50 3D CT data sets of the chest region, and by comparing it to a number of traditional methods using measures such as Mean Squared Difference, Mattes Mutual Information, and Correlation, and for rigid registration. Our results demonstrate that optimal atlases can be constructed in this manner and outperform other methods of construction using freely available software.

Spectral and temperature-dependent infrared emissivity measurements of painted metals for improved temperature estimation during laser damage testing

NASA Astrophysics Data System (ADS)

Baumann, Sean M.; Keenan, Cameron; Marciniak, Michael A.; Perram, Glen P.

2014-10-01

A database of spectral and temperature-dependent emissivities was created for painted Al-alloy laser-damage-testing targets for the purpose of improving the uncertainty to which temperature on the front and back target surfaces may be estimated during laser-damage testing. Previous temperature estimates had been made by fitting an assumed gray-body radiance curve to the calibrated spectral radiance data collected from the back surface using a Telops Imaging Fourier Transform Spectrometer (IFTS). In this work, temperature-dependent spectral emissivity measurements of the samples were made from room temperature to 500 °C using a Surface Optics Corp. SOC-100 Hemispherical Directional Reflectometer (HDR) with Nicolet FTS. Of particular interest was a high-temperature matte-black enamel paint used to coat the rear surfaces of the Al-alloy samples. The paint had been assumed to have a spectrally flat and temperatureinvariant emissivity. However, the data collected using the HDR showed both spectral variation and temperature dependence. The uncertainty in back-surface temperature estimation during laser-damage testing made using the measured emissivities was improved from greater than +10 °C to less than +5 °C for IFTS pixels away from the laser burn-through hole, where temperatures never exceeded those used in the SOC-100 HDR measurements. At beam center, where temperatures exceeded those used in the SOC-100 HDR, uncertainty in temperature estimates grew beyond those made assuming gray-body emissivity. Accurate temperature estimations during laser-damage testing are useful in informing a predictive model for future high-energy-laser weapon applications.

Spectroscopic characterisation of moonmilk deposits in Pozalagua tourist cave (Karrantza, Basque Country, North of Spain).

PubMed

Martínez-Arkarazo, I; Angulo, M; Zuloaga, O; Usobiaga, A; Madariaga, J M

2007-12-15

Composition of moonmilk deposits located in different zones of the tourist Dolomite Cave of Pozalagua (Karrantza, Basque Country, North of Spain) was established by Raman spectroscopy. The deposits were located in column bases and detached rocks near a gour full of water or a dripping zone. Hydromagnesite (Mg(5)(CO(3))(4)(OH)(2).4H(2)O) with a strong Raman band at 1116 cm(-1) and weaker ones at 1522vw, 1487vw, 1452vw, 756w, 727w, 466w, 434w, 371w, 327m, 291w, 258w, 247vw and 230 m cm(-1) was found as the main component of the moonmilk. Aragonite is the unique calcium carbonate compound that sometimes composes the moonmilk but always together with the hydromagnesite. Among non-carbonate minerals, some nitrates (nitrocalcite, niter, nitromagnesite, nitratine and gwihabaite) and sulphates (arkanite) were also identified as minor compounds. Most of the deposits were matt white and pasty, but occasionally some samples appear greyish on the surface. In these samples, carbon particles were also found, apart from the above, and Raman shift changes were observed in the hydromagnesite spectra. Apart from the elements involved in the mentioned minerals, Si, Fe, Mn, Zn and Ti were identified by X-ray microfluorescence as trace elements and the results were correlated with mineral compositions found by Raman measurements. Furthermore, quantification of the soluble salts of moonmilk deposits was carried out by ionic chromatography and the results were chemometrically treated to find correlations among soluble ions and the composition of the mineral phases spectroscopically characterised.

Assessment of Grating Acuity in Infants and Toddlers Using an Electronic Acuity Card: The Dobson Card.

PubMed

Mohan, Kathleen M; Miller, Joseph M; Harvey, Erin M; Gerhart, Kimberly D; Apple, Howard P; Apple, Deborah; Smith, Jordana M; Davis, Amy L; Leonard-Green, Tina; Campus, Irene; Dennis, Leslie K

2016-01-01

To determine if testing binocular visual acuity in infants and toddlers using the Acuity Card Procedure (ACP) with electronic grating stimuli yields clinically useful data. Participants were infants and toddlers ages 5 to 36.7 months referred by pediatricians due to failed automated vision screening. The ACP was used to test binocular grating acuity. Stimuli were presented on the Dobson Card. The Dobson Card consists of a handheld matte-black plexiglass frame with two flush-mounted tablet computers and is similar in size and form to commercially available printed grating acuity testing stimuli (Teller Acuity Cards II [TACII]; Stereo Optical, Inc., Chicago, IL). On each trial, one tablet displayed a square-wave grating and the other displayed a luminance-matched uniform gray patch. Stimuli were roughly equivalent to the stimuli available in the printed TACII stimuli. After acuity testing, each child received a cycloplegic eye examination. Based on cycloplegic retinoscopy, patients were categorized as having high or low refractive error per American Association for Pediatric Ophthalmology and Strabismus vision screening referral criteria. Mean acuities for high and low refractive error groups were compared using analysis of covariance, controlling for age. Mean visual acuity was significantly poorer in children with high refractive error than in those with low refractive error (P = .015). Electronic stimuli presented using the ACP can yield clinically useful measurements of grating acuity in infants and toddlers. Further research is needed to determine the optimal conditions and procedures for obtaining accurate and clinically useful automated measurements of visual acuity in infants and toddlers. Copyright 2016, SLACK Incorporated.

DOE Office of Scientific and Technical Information (OSTI.GOV)

S. Brunner; E. Valeo

Simulations of electron transport are carried out by solving the Fokker-Planck equation in the diffusive approximation. The system of a single laser hot spot, with open boundary conditions, is systematically studied by performing a scan over a wide range of the two relevant parameters: (1) Ratio of the stopping length over the width of the hot spot. (2) Relative importance of the heating through inverse Bremsstrahlung compared to the thermalization through self-collisions. As for uniform illumination [J.P. Matte et al., Plasma Phys. Controlled Fusion 30 (1988) 1665], the bulk of the velocity distribution functions (VDFs) present a super-Gaussian dependence. However,more » as a result of spatial transport, the tails are observed to be well represented by a Maxwellian. A similar dependence of the distributions is also found for multiple hot spot systems. For its relevance with respect to stimulated Raman scattering, the linear Landau damping of the electron plasma wave is estimated for such VD Fs. Finally, the nonlinear Fokker-Planck simulations of the single laser hot spot system are also compared to the results obtained with the linear non-local hydrodynamic approach [A.V. Brantov et al., Phys. Plasmas 5 (1998) 2742], thus providing a quantitative limit to the latter method: The hydrodynamic approach presents more than 10% inaccuracy in the presence of temperature variations of the order delta T/T greater than or equal to 1%, and similar levels of deformation of the Gaussian shape of the Maxwellian background.« less

A B-spline image registration based CAD scheme to evaluate drug treatment response of ovarian cancer patients

NASA Astrophysics Data System (ADS)

Tan, Maxine; Li, Zheng; Moore, Kathleen; Thai, Theresa; Ding, Kai; Liu, Hong; Zheng, Bin

2016-03-01

Ovarian cancer is the second most common cancer amongst gynecologic malignancies, and has the highest death rate. Since the majority of ovarian cancer patients (>75%) are diagnosed in the advanced stage with tumor metastasis, chemotherapy is often required after surgery to remove the primary ovarian tumors. In order to quickly assess patient response to the chemotherapy in the clinical trials, two sets of CT examinations are taken pre- and post-therapy (e.g., after 6 weeks). Treatment efficacy is then evaluated based on Response Evaluation Criteria in Solid Tumors (RECIST) guideline, whereby tumor size is measured by the longest diameter on one CT image slice and only a subset of selected tumors are tracked. However, this criterion cannot fully represent the volumetric changes of the tumors and might miss potentially problematic unmarked tumors. Thus, we developed a new CAD approach to measure and analyze volumetric tumor growth/shrinkage using a cubic B-spline deformable image registration method. In this initial study, on 14 sets of pre- and post-treatment CT scans, we registered the two consecutive scans using cubic B-spline registration in a multiresolution (from coarse to fine) framework. We used Mattes mutual information metric as the similarity criterion and the L-BFGS-B optimizer. The results show that our method can quantify volumetric changes in the tumors more accurately than RECIST, and also detect (highlight) potentially problematic regions that were not originally targeted by radiologists. Despite the encouraging results of this preliminary study, further validation of scheme performance is required using large and diverse datasets in future.

Intensity-Value Corrections for Integrating Sphere Measurements of Solid Samples Measured Behind Glass

DOE Office of Scientific and Technical Information (OSTI.GOV)

Johnson, Timothy J.; Bernacki, Bruce E.; Redding, Rebecca L.

2014-11-01

Accurate and calibrated directional-hemispherical reflectance spectra of solids are important for both in situ and remote sensing. Many solids are in the form of powders or granules and to measure their diffuse reflectance spectra in the laboratory, it is often necessary to place the samples behind a transparent medium such as glass for the ultraviolet (UV), visible, or near-infrared spectral regions. Using both experimental methods and a simple optical model, we demonstrate that glass (fused quartz in our case) leads to artifacts in the reflectance values. We report our observations that the measured reflectance values, for both hemispherical and diffusemore » reflectance, are distorted by the additional reflections arising at the air–quartz and sample–quartz interfaces. The values are dependent on the sample reflectance and are offset in intensity in the hemispherical case, leading to measured values up to ~6% too high for a 2% reflectance surface, ~3.8% too high for 10% reflecting surfaces, approximately correct for 40–60% diffuse-reflecting surfaces, and ~1.5% too low for 99% reflecting Spectralon® surfaces. For the case of diffuse-only reflectance, the measured values are uniformly too low due to the polished glass, with differences of nearly 6% for a 99% reflecting matte surface. The deviations arise from the added reflections from the quartz surfaces, as verified by both theory and experiment, and depend on sphere design. Finally, empirical correction factors were implemented into post-processing software to redress the artifact for hemispherical and diffuse reflectance data across the 300–2300 nm range.« less

Emergence: A Planetarium and Art Gallery Collaboration Between Artist, Astronomer, and Musician

NASA Astrophysics Data System (ADS)

Beaver, J.; Waller, J. B.; Turner, M.

2011-09-01

We describe an unusual planetarium program and art gallery exhibition that premiered in Menasha, Wisconsin. Emergence combines fine art and improvisational music with astronomy and physics. The authors, Judith Baker Waller, John Beaver, and Matt Turner, are, respectively, artist, astronomer, and musician. All three acted as partners in planning and executing the final production. The overall goal of Emergence is to use art, music, and natural science each as a point of departure to learn about the others, and to explore the interaction between humans and the natural world and the differences and commonalities between art, science, and music. Of particular interest, the planetarium portion includes techniques that are, so far as we know, unique. Each night the show is different, the details chosen randomly, but always according to the same theoretical scheme. Various elements are parameterized, the show varying with time according to subroutines that dictate the overall pacing and look, but with details always chosen randomly according to prearranged probabilities. We believe that some of these techniques could be of interest to others who wish to explore the unique possibilities of the planetarium as educational performance space. We argue that this provides a useful format for collaborations between artist and scientist, as scientific content can be delivered in a way that is consistent with the concerns of the artist. We describe some of the approaches taken toward these ends in Emergence, and some of the lessons learned about the process of collaboration between a scientist, a visual artist and a performing artist.

Long-term effect of beach replenishment on natural recovery of shallow Posidonia oceanica meadows

NASA Astrophysics Data System (ADS)

González-Correa, José M.; Torquemada, Yolanda Fernández; Sánchez Lizaso, José Luis

2008-03-01

The recovery capacity of shallow Posidonia oceanica meadows degraded by beach replenishment eighteen years before was assessed in two impacted meadows and compared with other two undisturbed localities. Inside each locality, we selected randomly three sites separated by 500-1000 m. At site level we study the vitality of P. oceanica meadow assessing the vegetative growth, leaf characteristics, and non-structural carbohydrates of the plants. Additionally, at locality level, silt-clay fraction, organic matter, pH and light intensity incident on the sea bottom were measured to evaluate the environmental conditions. Covering of P. oceanica was significantly lower at the impacted localities while amount of dead "matte" was higher. Leaf production of horizontal rhizomes (14.6 ± 1.11 vs 19.47 ± 1.45 leaves y -1), net total rhizomes recruitment (2.33 ± 0.17 vs 4.3 ± 0.33 branches y -1) and starch concentration (43.625 ± 0.67 vs 54.45 ± 0.74 mg per g of rhizome) at impacted meadows were significantly lower than controls. Leaf features, epiphytes biomass, colonization, elongation and horizontal and vertical rhizome production did not show significant differences. Sediments at impacted localities contained higher silt-clay fraction and higher organic matter load while pH was lower. Light intensity on the sea bottom measured at all localities was over the minimum light requirements estimated for P. oceanica. Our results show that the press impact produced by beach replenishment was enduring in the time slowing natural recovery by 45%. This impact may be related with changes in the sediment features.

Rock Moved by Mars Lander Arm

NASA Technical Reports Server (NTRS)

2008-01-01

The robotic arm on NASA's Phoenix Mars Lander slid a rock out of the way during the mission's 117th Martian day (Sept. 22, 2008) to gain access to soil that had been underneath the rock.The lander's Surface Stereo Imager took the two images for this stereo view later the same day, showing the rock, called 'Headless,' after the arm pushed it about 40 centimeters (16 inches) from its previous location.

'The rock ended up exactly where we intended it to,' said Matt Robinson of NASA's Jet Propulsion Laboratory, robotic arm flight software lead for the Phoenix team.

The arm had enlarged the trench near Headless two days earlier in preparation for sliding the rock into the trench. The trench was dug to about 3 centimeters (1.2 inches) deep. The ground surface between the rock's prior position and the lip of the trench had a slope of about 3 degrees downward toward the trench. Headless is about the size and shape of a VHS videotape.

The Phoenix science team sought to move the rock in order to study the soil and the depth to subsurface ice underneath where the rock had been.

This image was taken at about 12:30 p.m., local solar time on Mars. The view is to the north northeast of the lander.

The Phoenix Mission is led by the University of Arizona, Tucson, on behalf of NASA. Project management of the mission is by JPL, Pasadena, Calif. Spacecraft development was by Lockheed Martin Space Systems, Denver.

Key characteristics of specular stereo

PubMed Central

Muryy, Alexander A.; Fleming, Roland W.; Welchman, Andrew E.

2014-01-01

Because specular reflection is view-dependent, shiny surfaces behave radically differently from matte, textured surfaces when viewed with two eyes. As a result, specular reflections pose substantial problems for binocular stereopsis. Here we use a combination of computer graphics and geometrical analysis to characterize the key respects in which specular stereo differs from standard stereo, to identify how and why the human visual system fails to reconstruct depths correctly from specular reflections. We describe rendering of stereoscopic images of specular surfaces in which the disparity information can be varied parametrically and independently of monocular appearance. Using the generated surfaces and images, we explain how stereo correspondence can be established with known and unknown surface geometry. We show that even with known geometry, stereo matching for specular surfaces is nontrivial because points in one eye may have zero, one, or multiple matches in the other eye. Matching features typically yield skew (nonintersecting) rays, leading to substantial ortho-epipolar components to the disparities, which makes deriving depth values from matches nontrivial. We suggest that the human visual system may base its depth estimates solely on the epipolar components of disparities while treating the ortho-epipolar components as a measure of the underlying reliability of the disparity signals. Reconstructing virtual surfaces according to these principles reveals that they are piece-wise smooth with very large discontinuities close to inflection points on the physical surface. Together, these distinctive characteristics lead to cues that the visual system could use to diagnose specular reflections from binocular information. PMID:25540263

Triad Resonance in the Gravity-Acoustic Family

NASA Astrophysics Data System (ADS)

Kadri, U.

2015-12-01

Resonance interactions of waves play a prominent role in energy share among the different wave types involved. Such interactions may significantly contribute, among others, to the evolution of the ocean energy spectrum by exchanging energy between surface-gravity waves; surface and internal gravity waves; or even surface and compression-type waves, that can transfer energy from the upper ocean through the whole water column reaching down to the seafloor. A resonant triad occurs among a triplet of waves, usually involving interaction of nonlinear terms of second order perturbed equations. Until recently, it has been believed that in a homogeneous fluid a resonant triad is possible only when tension forces are included, or at the limit of a shallow water, and that when the compressibility of water is considered, no resonant triads can occur within the family of gravity-acoustic waves. However, more recently it has been proved that, under some circumstances, resonant triads comprising two opposing surface-gravity waves of similar periods (though not identical) and a much longer acoustic-gravity wave, of almost double the frequency, exist [Kadri and Stiassnie 2013, J. Fluid Mech.735 R6]. Here, I report on a new resonant triad involving a gravity wave and two acoustic waves of almost double the length. Interestingly, the two acoustic waves propagate in the same direction with similar wavelengths, that are almost double of that of the gravity wave. The evolution of the wave triad amplitudes is periodic and it is derived analytically, in terms of Jacobian elliptic functions and elliptic integrals. The physical importance of this type of triad interactions is the modulation of pertinent acoustic signals, leading to inaccurate signal perceptions. Enclosed figure: presents an example spatio-temporal evolution of the wave triad amplitudes. The gravity wave (top) remains almost unaltered, while the envelope slowly displaces to the left. However, the prescribed acoustic

Separate and Simultaneous Adjustment of Light Qualities in a Real Scene

PubMed Central

Pont, Sylvia C.; Heynderick, Ingrid

2017-01-01

Humans are able to estimate light field properties in a scene in that they have expectations of the objects’ appearance inside it. Previously, we probed such expectations in a real scene by asking whether a “probe object” fitted a real scene with regard to its lighting. But how well are observers able to interactively adjust the light properties on a “probe object” to its surrounding real scene? Image ambiguities can result in perceptual interactions between light properties. Such interactions formed a major problem for the “readability” of the illumination direction and diffuseness on a matte smooth spherical probe. We found that light direction and diffuseness judgments using a rough sphere as probe were slightly more accurate than when using a smooth sphere, due to the three-dimensional (3D) texture. We here extended the previous work by testing independent and simultaneous (i.e., the light field properties separated one by one or blended together) adjustments of light intensity, direction, and diffuseness using a rough probe. Independently inferred light intensities were close to the veridical values, and the simultaneously inferred light intensity interacted somewhat with the light direction and diffuseness. The independently inferred light directions showed no statistical difference with the simultaneously inferred directions. The light diffuseness inferences correlated with but contracted around medium veridical values. In summary, observers were able to adjust the basic light properties through both independent and simultaneous adjustments. The light intensity, direction, and diffuseness are well “readable” from our rough probe. Our method allows “tuning the light” (adjustment of its spatial distribution) in interfaces for lighting design or perception research. PMID:28203350

Differential processing of binocular and monocular gloss cues in human visual cortex

PubMed Central

Di Luca, Massimiliano; Ban, Hiroshi; Muryy, Alexander; Fleming, Roland W.

2016-01-01

The visual impression of an object's surface reflectance (“gloss”) relies on a range of visual cues, both monocular and binocular. Whereas previous imaging work has identified processing within ventral visual areas as important for monocular cues, little is known about cortical areas involved in processing binocular cues. Here, we used human functional MRI (fMRI) to test for brain areas selectively involved in the processing of binocular cues. We manipulated stereoscopic information to create four conditions that differed in their disparity structure and in the impression of surface gloss that they evoked. We performed multivoxel pattern analysis to find areas whose fMRI responses allow classes of stimuli to be distinguished based on their depth structure vs. material appearance. We show that higher dorsal areas play a role in processing binocular gloss information, in addition to known ventral areas involved in material processing, with ventral area lateral occipital responding to both object shape and surface material properties. Moreover, we tested for similarities between the representation of gloss from binocular cues and monocular cues. Specifically, we tested for transfer in the decoding performance of an algorithm trained on glossy vs. matte objects defined by either binocular or by monocular cues. We found transfer effects from monocular to binocular cues in dorsal visual area V3B/kinetic occipital (KO), suggesting a shared representation of the two cues in this area. These results indicate the involvement of mid- to high-level visual circuitry in the estimation of surface material properties, with V3B/KO potentially playing a role in integrating monocular and binocular cues. PMID:26912596

Quantitative Evaluation of Surface Color of Tomato Fruits Cultivated in Remote Farm Using Digital Camera Images

NASA Astrophysics Data System (ADS)

Hashimoto, Atsushi; Suehara, Ken-Ichiro; Kameoka, Takaharu

To measure the quantitative surface color information of agricultural products with the ambient information during cultivation, a color calibration method for digital camera images and a remote monitoring system of color imaging using the Web were developed. Single-lens reflex and web digital cameras were used for the image acquisitions. The tomato images through the post-ripening process were taken by the digital camera in both the standard image acquisition system and in the field conditions from the morning to evening. Several kinds of images were acquired with the standard RGB color chart set up just behind the tomato fruit on a black matte, and a color calibration was carried out. The influence of the sunlight could be experimentally eliminated, and the calibrated color information consistently agreed with the standard ones acquired in the system through the post-ripening process. Furthermore, the surface color change of the tomato on the tree in a greenhouse was remotely monitored during maturation using the digital cameras equipped with the Field Server. The acquired digital color images were sent from the Farm Station to the BIFE Laboratory of Mie University via VPN. The time behavior of the tomato surface color change during the maturing process could be measured using the color parameter calculated based on the obtained and calibrated color images along with the ambient atmospheric record. This study is a very important step in developing the surface color analysis for both the simple and rapid evaluation of the crop vigor in the field and to construct an ambient and networked remote monitoring system for food security, precision agriculture, and agricultural research.

Differential processing of binocular and monocular gloss cues in human visual cortex.

PubMed

Sun, Hua-Chun; Di Luca, Massimiliano; Ban, Hiroshi; Muryy, Alexander; Fleming, Roland W; Welchman, Andrew E

2016-06-01

The visual impression of an object's surface reflectance ("gloss") relies on a range of visual cues, both monocular and binocular. Whereas previous imaging work has identified processing within ventral visual areas as important for monocular cues, little is known about cortical areas involved in processing binocular cues. Here, we used human functional MRI (fMRI) to test for brain areas selectively involved in the processing of binocular cues. We manipulated stereoscopic information to create four conditions that differed in their disparity structure and in the impression of surface gloss that they evoked. We performed multivoxel pattern analysis to find areas whose fMRI responses allow classes of stimuli to be distinguished based on their depth structure vs. material appearance. We show that higher dorsal areas play a role in processing binocular gloss information, in addition to known ventral areas involved in material processing, with ventral area lateral occipital responding to both object shape and surface material properties. Moreover, we tested for similarities between the representation of gloss from binocular cues and monocular cues. Specifically, we tested for transfer in the decoding performance of an algorithm trained on glossy vs. matte objects defined by either binocular or by monocular cues. We found transfer effects from monocular to binocular cues in dorsal visual area V3B/kinetic occipital (KO), suggesting a shared representation of the two cues in this area. These results indicate the involvement of mid- to high-level visual circuitry in the estimation of surface material properties, with V3B/KO potentially playing a role in integrating monocular and binocular cues. Copyright © 2016 the American Physiological Society.

A randomized study on migration of the Spectron EF and the Charnley flanged 40 cemented femoral components using radiostereometric analysis at 2 years.

PubMed

Kadar, Thomas; Hallan, Geir; Aamodt, Arild; Indrekvam, Kari; Badawy, Mona; Havelin, Leif Ivar; Stokke, Terje; Haugan, Kristin; Espehaug, Birgitte; Furnes, Ove

2011-10-01

We performed a randomized study to determine the migration patterns of the Spectron EF femoral stem and to compare them with those of the Charnley stem, which is regarded by many as the gold standard for comparison of implants due to its extensive documentation. 150 patients with a mean age of 70 years were randomized, single-blinded, to receive either a cemented Charnley flanged 40 monoblock, stainless steel, vaquasheen surface femoral stem with a 22.2-mm head (n = 30) or a cemented Spectron EF modular, matte, straight, collared, cobalt-chrome femoral stem with a 28-mm femoral head and a roughened proximal third of the stem (n = 120). The patients were followed with repeated radiostereometric analysis for 2 years to assess migration. At 2 years, stem retroversion was 2.3° and 0.7° (p < 0.001) and posterior translation was 0.44 mm and 0.17 mm (p = 0.002) for the Charnley group (n = 26) and the Spectron EF group (n = 74), respectively. Subsidence was 0.26 mm for the Charnley and 0.20 mm for the Spectron EF (p = 0.5). The Spectron EF femoral stem was more stable than the Charnley flanged 40 stem in our study when evaluated at 2 years. In a report from the Norwegian arthroplasty register, the Spectron EF stem had a higher revision rate due to aseptic loosening beyond 5 years than the Charnley. Initial stability is not invariably related to good long-term results. Our results emphasize the importance of prospective long-term follow-up of prosthetic implants in clinical trials and national registries and a stepwise introduction of implants.

Rock Moved by Mars Lander Arm, Stereo View

NASA Technical Reports Server (NTRS)

2008-01-01

The robotic arm on NASA's Phoenix Mars Lander slid a rock out of the way during the mission's 117th Martian day (Sept. 22, 2008) to gain access to soil that had been underneath the rock.The lander's Surface Stereo Imager took the two images for this stereo view later the same day, showing the rock, called 'Headless,' after the arm pushed it about 40 centimeters (16 inches) from its previous location.

'The rock ended up exactly where we intended it to,' said Matt Robinson of NASA's Jet Propulsion Laboratory, robotic arm flight software lead for the Phoenix team.

The arm had enlarged the trench near Headless two days earlier in preparation for sliding the rock into the trench. The trench was dug to about 3 centimeters (1.2 inches) deep. The ground surface between the rock's prior position and the lip of the trench had a slope of about 3 degrees downward toward the trench. Headless is about the size and shape of a VHS videotape.

The Phoenix science team sought to move the rock in order to study the soil and the depth to subsurface ice underneath where the rock had been.

This left-eye and right-eye images for this stereo view were taken at about 12:30 p.m., local solar time on Mars. The scene appears three-dimensional when seen through blue-red glasses.The view is to the north northeast of the lander.

The Phoenix Mission is led by the University of Arizona, Tucson, on behalf of NASA. Project management of the mission is by JPL, Pasadena, Calif. Spacecraft development was by Lockheed Martin Space Systems, Denver.

Leaf physiological versus morphological acclimation to high-light exposure at different stages of foliar development in oak.

PubMed

Rodríguez-Calcerrada, J; Reich, P B; Rosenqvist, E; Pardos, J A; Cano, F J; Aranda, I

2008-05-01

We investigated light acclimation in seedlings of the temperate oak Quercus petraea (Matt.) Liebl. and the co-occurring sub-Mediterranean oak Quercus pyrenaica Willd. Seedlings were raised in a greenhouse for 1 year in either 70 (HL) or 5.3% (LL) of ambient irradiance of full sunlight, and, in the following year, subsets of the LL-grown seedlings were transferred to HL either before leaf flushing (LL-HLBF plants) or after full leaf expansion (LL-HLAF plants). Gas exchange, chlorophyll a fluorescence, nitrogen fractions in photosynthetic components and leaf anatomy were examined in leaves of all seedlings 5 months after plants were moved from LL to HL. Differences between species in the acclimation of LL-grown plants to HL were minor. For LL-grown plants in HL, area-based photosynthetic capacity, maximum rate of carboxylation, maximum rate of electron transport and the effective photochemical quantum yield of photosystem II were comparable to those for plants grown solely in HL. A rapid change in nitrogen distribution among photosynthetic components was observed in LL-HLAF plants, which had the highest photosynthetic nitrogen-use efficiency. Increases in mesophyll thickness and dry mass per unit area governed leaf acclimation in LL-HLBF plants, which tended to have less nitrogen in photosynthetic components and a lower assimilation potential per unit of leaf mass or nitrogen than LL-HLAF plants. The data indicate that the phenological state of seedlings modified the acclimatory response of leaf attributes to increased irradiance. Morphological adaptation of leaves of LL-HLBF plants enhanced photosynthetic capacity per unit leaf area, but not per unit leaf dry mass, whereas substantial redistribution of nitrogen among photosynthetic components in leaves of LL-HLAF plants enhanced both mass- and area-based photosynthetic capacity.

Effect of nanofillers' size on surface properties after toothbrush abrasion.

PubMed

Cavalcante, Larissa M; Masouras, Konstantinos; Watts, David C; Pimenta, Luiz A; Silikas, Nick

2009-02-01

To investigate the effect of filler-particle size of experimental and commercial resin composites, undergoing toothbrush abrasion, on three surface properties: surface roughness (SR), surface gloss (G) and color stability (CS). Four model (Ivoclar/Vivadent) and one commercial resin composite (Tokuyama) with varying filler-size from 100-1000 nm were examined. Six discs (10 mm x 2 mm) from each product were prepared and mechanically polished. The samples were then submitted to 20,000 brushing strokes in a toothbrush abrasion machine. SR parameters (Ra, Rt and RSm), G, and CS were measured before and after toothbrush abrasion. Changes in SR and G were analyzed by 2-way ANOVA, with Bonferroni post hoc test. CS values were submitted to one-way ANOVA and Bonferroni post hoc test (alpha=0.05). Initial G values ranged between 73-87 gloss units (GU) and were reduced after toothbrush abrasion to a range of 8-64 GU. Toothbrush abrasion resulted in significant modifications in SR and G amongst the materials tested, attributed to filler sizes. There was statistically significant difference in color (delta E* ranged from 0.38-0.88). Filler size did not affect color stability. Toothbrush abrasion resulted in rougher and matte surfaces for all materials tested. Although the individual differences in surface roughness among filler sizes were not always significant, the correlation showed a trend that larger filler sizes resulted in higher surface roughness after abrasion for the SR parameters Ra and Rt (r = 0.95; r = 0.93, respectively). RSm showed an increase after toothbrush abrasion for all resin composites, however no significant correlation was detected (r = 0.21).There was a significant correlation between G and Ra ratios (r = - 0.95).

Methods for quantitative infrared directional-hemispherical and diffuse reflectance measurements using an FTIR and a commercial integrating sphere

DOE Office of Scientific and Technical Information (OSTI.GOV)

Blake, Thomas A.; Johnson, Timothy J.; Tonkyn, Russell G.

Infrared integrating sphere measurements of solid samples are important in providing reference data for contact, standoff and remote sensing applications. At the Pacific Northwest National Laboratory (PNNL) we have developed protocols to measure both the directional-hemispherical ( and diffuse (d) reflectances of powders, liquids, and disks of powders and solid materials using a commercially available, matte gold-coated integrating sphere and Fourier transform infrared spectrometer. Detailed descriptions of the sphere alignment and its use for making these reflectance measurements are given. Diffuse reflectance values were found to be dependent on the bidirectional reflection distribution function (BRDF) of the sample and themore » solid angle intercepted by the sphere’s specular exclusion port. To determine how well the sphere and protocols produce quantitative reflectance data, measurements were made of three diffuse and two specular standards prepared by the National institute of Standards and Technology (NIST, USA), LabSphere Infragold and Spectralon standards, hand-loaded sulfur and talc powder samples, and water. The five NIST standards behaved as expected: the three diffuse standards had a high degree of “diffuseness,” d/ = D > 0.9, whereas the two specular standards had D ≤ 0.03. The average absolute differences between the NIST and PNNL measurements of the NIST standards for both directional-hemispherical and diffuse reflectances are on the order of 0.01 reflectance units. Other quantitative differences between the PNNL-measured and calibration (where available) or literature reflectance values for these standards and materials are given and the possible origins of discrepancies are discussed. Random uncertainties and estimates of systematic uncertainties are presented. Corrections necessary to provide better agreement between the PNNL reflectance values as measured for the NIST standards and the NIST reflectance values for these same standards

Siderophile Element Partitioning between Sulfide- and Silicate melts.

NASA Astrophysics Data System (ADS)

Hackler, S.; Rohrbach, A.; Loroch, D. C.; Klemme, S.; Berndt, J.

2017-12-01

Different theories concerning the formation of the Earth are debated. Either Earth accreted mostly `dry' or volatile elements were delivered late after core formation was largely inactive [1, 2], or volatile rich material was accreted during the main stages of accretion and core formation [3, 4, 5]. The partitioning behavior of siderophile volatile elements (SVE; S, Se, Te, Tl, Ag, Au, Cd, Bi, Pb, Sn, Cu, Ge, and In) may provide first order constraints whether these element concentrations in Earth's mantle were established before or after core-mantle differentiation or perhaps during both periods by multi stage core formation [6]. A special interest is laid into chalcophile element behavior with respective to the possible formation and segregation of a hadean matte [7]. To examine the influence of sulfur on SVE partitioning between metal-silicate melts, we performed experiments simulating a magma ocean stage evolving from sulfur poor- (low fO2) to more oxidizing sulfur rich- (Fe, Ni)-S melts ( 20 wt% S) towards the end of accretion. We carried out partitioning experiments under various P-T-fO2 conditions with a Bristol type end loaded piston cylinder apparatus (<3 GPa) and a 1000 t walker-type multi-anvil press (3-20 GPa). Our results will be presented at the meeting. References: [1] Albarède F. (2009) Nature, 461, 1227-1233. [2] Ballhaus C. et al. (2013) EPSL, 362, 237-245. [3] Fischer-Gödde M. and Kleine T. (2017) Nature, 541, 525 527. [4] Wade J. and Wood B. J. (2005) EPSL, 236, 78-95. [5] Rubie D. et al. (2016) Science, 253, 1141-1144. [6] Rubie D. et al. (2011) EPSL, 301, 31-42. [7] O'Neill H. St. C. (1991) GCA, 55, 1159-1172.

The Influence of Friction Between Football Helmet and Jersey Materials on Force: A Consideration for Sport Safety

PubMed Central

Rossi, Anthony M.; Claiborne, Tina L.; Thompson, Gregory B.; Todaro, Stacey

2016-01-01

Context: The pocketing effect of helmet padding helps to dissipate forces experienced by the head, but if the player's helmet remains stationary in an opponent's shoulder pads, the compressive force on the cervical spine may increase. Objective: To (1) measure the coefficient of static friction between different football helmet finishes and football jersey fabrics and (2) calculate the potential amount of force on a player's helmet due to the amount of friction present. Design: Cross-sectional study. Setting: Laboratory. Patients or Other Participants: Helmets with different finishes and different football jersey fabrics. Main Outcome Measure(s): The coefficient of friction was determined for 2 helmet samples (glossy and matte), 3 football jerseys (collegiate, high school, and youth), and 3 types of jersey numbers (silkscreened, sublimated, and stitched on) using the TAPPI T 815 standard method. These measurements determined which helmet-to-helmet, helmet-to-jersey number, and helmet-to-jersey material combination resulted in the least amount of static friction. Results: The glossy helmet versus glossy helmet combination produced a greater amount of static friction than the other 2 helmet combinations (P = .013). The glossy helmet versus collegiate jersey combination produced a greater amount of static friction than the other helmet-to-jersey material combinations (P < .01). The glossy helmet versus silkscreened numbers combination produced a greater amount of static friction than the other helmet-to-jersey number combinations (P < .01). Conclusions: The force of static friction experienced during collisions can be clinically relevant. Conditions with higher coefficients of static friction result in greater forces. In this study, the highest coefficient of friction (glossy helmet versus silkscreened number) could increase the forces on the player's helmet by 3553.88 N when compared with other helmet-to-jersey combinations. Our results indicate that the makeup of

The Influence of Friction Between Football Helmet and Jersey Materials on Force: A Consideration for Sport Safety.

PubMed

Rossi, Anthony M; Claiborne, Tina L; Thompson, Gregory B; Todaro, Stacey

2016-09-01

The pocketing effect of helmet padding helps to dissipate forces experienced by the head, but if the player's helmet remains stationary in an opponent's shoulder pads, the compressive force on the cervical spine may increase. To (1) measure the coefficient of static friction between different football helmet finishes and football jersey fabrics and (2) calculate the potential amount of force on a player's helmet due to the amount of friction present. Cross-sectional study. Laboratory. Helmets with different finishes and different football jersey fabrics. The coefficient of friction was determined for 2 helmet samples (glossy and matte), 3 football jerseys (collegiate, high school, and youth), and 3 types of jersey numbers (silkscreened, sublimated, and stitched on) using the TAPPI T 815 standard method. These measurements determined which helmet-to-helmet, helmet-to-jersey number, and helmet-to-jersey material combination resulted in the least amount of static friction. The glossy helmet versus glossy helmet combination produced a greater amount of static friction than the other 2 helmet combinations (P = .013). The glossy helmet versus collegiate jersey combination produced a greater amount of static friction than the other helmet-to-jersey material combinations (P < .01). The glossy helmet versus silkscreened numbers combination produced a greater amount of static friction than the other helmet-to-jersey number combinations (P < .01). The force of static friction experienced during collisions can be clinically relevant. Conditions with higher coefficients of static friction result in greater forces. In this study, the highest coefficient of friction (glossy helmet versus silkscreened number) could increase the forces on the player's helmet by 3553.88 N when compared with other helmet-to-jersey combinations. Our results indicate that the makeup of helmet and uniform materials may affect sport safety.

Automatic patient alignment system using 3D ultrasound.

PubMed

Kaar, Marcus; Figl, Michael; Hoffmann, Rainer; Birkfellner, Wolfgang; Stock, Markus; Georg, Dietmar; Goldner, Gregor; Hummel, Johann

2013-04-01

Recent developments in radiation therapy such as intensity modulated radiotherapy (IMRT) or dose painting promise to provide better dose distribution on the tumor. For effective application of these methods the exact positioning of the patient and the localization of the irradiated organ and surrounding structures is crucial. Especially with respect to the treatment of the prostate, ultrasound (US) allows for differentiation between soft tissue and was therefore applied by various repositioning systems, such as BAT or Clarity. The authors built a new system which uses 3D US at both sites, the CT room and the intervention room and applied a 3D/3D US/US registration for automatic repositioning. In a first step the authors applied image preprocessing methods to prepare the US images for an optimal registration process. For the 3D/3D registration procedure five different metrics were evaluated. To find the image metric which fits best for a particular patient three 3D US images were taken at the CT site and registered to each other. From these results an US registration error was calculated. The most successful image metric was then applied for the US/US registration process. The success of the whole repositioning method was assessed by taking the results of an ExacTrac system as golden standard. The US/US registration error was found to be 2.99 ± 1.54 mm with respect to the mutual information metric by Mattes (eleven patients) which revealed to be the most suitable of the assessed metrics. For complete repositioning chain the error amounted to 4.15 ± 1.20 mm (ten patients). The authors developed a system for patient repositioning which works automatically without the necessity of user interaction with an accuracy which seems to be suitable for clinical application.

Does Forest Continuity Enhance the Resilience of Trees to Environmental Change?

PubMed

von Oheimb, Goddert; Härdtle, Werner; Eckstein, Dieter; Engelke, Hans-Hermann; Hehnke, Timo; Wagner, Bettina; Fichtner, Andreas

2014-01-01

There is ample evidence that continuously existing forests and afforestations on previously agricultural land differ with regard to ecosystem functions and services such as carbon sequestration, nutrient cycling and biodiversity. However, no studies have so far been conducted on possible long-term (>100 years) impacts on tree growth caused by differences in the ecological continuity of forest stands. In the present study we analysed the variation in tree-ring width of sessile oak (Quercus petraea (Matt.) Liebl.) trees (mean age 115-136 years) due to different land-use histories (continuously existing forests, afforestations both on arable land and on heathland). We also analysed the relation of growth patterns to soil nutrient stores and to climatic parameters (temperature, precipitation). Tree rings formed between 1896 and 2005 were widest in trees afforested on arable land. This can be attributed to higher nitrogen and phosphorous availability and indicates that former fertilisation may continue to affect the nutritional status of forest soils for more than one century after those activities have ceased. Moreover, these trees responded more strongly to environmental changes - as shown by a higher mean sensitivity of the tree-ring widths - than trees of continuously existing forests. However, the impact of climatic parameters on the variability in tree-ring width was generally small, but trees on former arable land showed the highest susceptibility to annually changing climatic conditions. We assume that incompletely developed humus horizons as well as differences in the edaphon are responsible for the more sensitive response of oak trees of recent forests (former arable land and former heathland) to variation in environmental conditions. We conclude that forests characterised by a long ecological continuity may be better adapted to global change than recent forest ecosystems.

Does Forest Continuity Enhance the Resilience of Trees to Environmental Change?

PubMed Central

von Oheimb, Goddert; Härdtle, Werner; Eckstein, Dieter; Engelke, Hans-Hermann; Hehnke, Timo; Wagner, Bettina; Fichtner, Andreas

2014-01-01

There is ample evidence that continuously existing forests and afforestations on previously agricultural land differ with regard to ecosystem functions and services such as carbon sequestration, nutrient cycling and biodiversity. However, no studies have so far been conducted on possible long-term (>100 years) impacts on tree growth caused by differences in the ecological continuity of forest stands. In the present study we analysed the variation in tree-ring width of sessile oak (Quercus petraea (Matt.) Liebl.) trees (mean age 115–136 years) due to different land-use histories (continuously existing forests, afforestations both on arable land and on heathland). We also analysed the relation of growth patterns to soil nutrient stores and to climatic parameters (temperature, precipitation). Tree rings formed between 1896 and 2005 were widest in trees afforested on arable land. This can be attributed to higher nitrogen and phosphorous availability and indicates that former fertilisation may continue to affect the nutritional status of forest soils for more than one century after those activities have ceased. Moreover, these trees responded more strongly to environmental changes – as shown by a higher mean sensitivity of the tree-ring widths – than trees of continuously existing forests. However, the impact of climatic parameters on the variability in tree-ring width was generally small, but trees on former arable land showed the highest susceptibility to annually changing climatic conditions. We assume that incompletely developed humus horizons as well as differences in the edaphon are responsible for the more sensitive response of oak trees of recent forests (former arable land and former heathland) to variation in environmental conditions. We conclude that forests characterised by a long ecological continuity may be better adapted to global change than recent forest ecosystems. PMID:25494042

Committee ARM User Executive Committee Meeting Summary March 30-31, 2016

DOE Office of Scientific and Technical Information (OSTI.GOV)

None, None

This meeting was held at the National Center for Atmospheric Research (NCAR) Mesa Lab, Boulder, Colorado. Atmospheric Radiation Measurement (ARM) Climate Research Facility User Executive Committee (UEC) members present were: Chuck Long, Ernie Lewis, Larry Berg, Hailong Wang, Matt Shupe, Andrew Gettelman, and Dave Turner. Rob Wood joined the discussion at several points via conference call, as he was unable to attend in person. Gannet Hallar and Pavlos Kollias were unable to attend. ARM Infrastructure members present were: Jim Mather, Jennifer Comstock, Jimmy Voyles, Ken Kehoe, Doug Sisterson, Hanna Goss, and Giri Prakash. The ARM UEC met face to facemore » for the first time since the committee was formed in December, 2014 at the NCAR Mesa Lab in Boulder. Prior to this point, all UEC meetings were done via telephone, usually with the aid of collaboration software (e.g., Lync, GoToMeeting) allowing the entire committee to see a common presentation. These conference calls covered a wide range of topics, many of them on a recurrent basis; however, since the calls were limited to less than 90 minutes it was felt that a more dedicated meeting would allow us to delve more deeply into some of these topics. Three topics for this meeting came from previous conference call discussions: (1) data quality, (2) uncertainty quantification, and (3) improved communications. Two other topics were discussed during this meeting: (4) an overview of the LES (large-eddy simulation) ARM Symbiotic Simulation and Observation (LASSO) project and (5) the process for electing new UEC members. Summaries of each of these topics are provided below, along with recommendations that the UEC feels should be considered by the ARM Facility (which will be highlighted using italics).« less

Na, Rb and Cs partitioning between metal, silicate and sulfide: Implications for volatile depletion in terrestrial planets

NASA Astrophysics Data System (ADS)

Boujibar, A.; Fei, Y.; Du, Z.; Righter, K.; Bullock, E. S.

2017-12-01

Inner Solar System materials are known for their depletion in volatile elements, including the moderately volatile alkalis: Na, K, Rb, and Cs. The origin of this depletion is still uncertain, as several processes could have been involved, during the nebular condensation or planetary accretion. Volatile depletion is commonly estimated through comparison of alkali concentrations relatively to those of chondrites, assuming they remain in planetary mantles during core segregation. However, experimental studies show that substantial K can partition into metals that are enriched in sulfur and oxygen. Several models have also suggested that sulfides may have played an important role during episodes of sulfide segregation from a crystallizing magma ocean (sulfide matte) or accretion of S-rich planetary embryos. For Mercury, a sulfide layer could be present between core and mantle, due to immiscibility between Si-rich and S-rich metals. Therefore, here we investigate whether alkali elements (Na, Cs and Rb) could be partly sequestered in planetary cores during their differentiation. We conducted experiments at high pressure and temperature (1 to 5 GPa and up to 1900 °C) to determine partition coefficients of Na, Rb and Cs between metal and silicate. Our results show that pressure, temperature, sulfur and oxygen in metals enhance the partitioning of Na, Rb and Cs into metals, as previously found for K. For all three investigated alkalis (Na, Rb and Cs), we found a maximum partition coefficient of 1 between sulfides containing 13 wt% O and silicate melt. Therefore, S-rich cores or sulfide layers formed due to immiscibility in Fe-S-O systems could have acted as important geochemical reservoirs for alkali elements. Using our experimental data and different assumptions on initial bulk abundances, we evaluate volatile depletion in terrestrial planets, by comparing resulting mantle alkali concentrations after core segregation, with actual concentrations in the Earth's mantle.

Sustainable Seas Student Intertidal Monitoring Project at Duxbury Reef in Bolinas, CA (Invited)

NASA Astrophysics Data System (ADS)

Soave, K.; Dean, A.; Darakananda, K.; Ball, O.; Butti, C.; Yang, G.; Vetter, M.; Grimaldi, Z.

2009-12-01

Sustainable Seas Student Intertidal Monitoring Project at Duxbury Reef in Bolinas, CA Kathy Soave, Amy Dean, Olivia Ball, Karin Darakananda, Matt Vetter, Grant Yang, Charlotte Butti, Zoe Grimaldi The Sustainable Seas Student Monitoring Project at the Branson School in Ross, CA has monitored Duxbury Reef in Bolinas, CA since 1999, in cooperation with the Farallones Marine Sanctuary Association and the Gulf of Farallones National Marine Sanctuary. Goals of the project include: 1) To monitor the rocky intertidal habitat and develop a baseline database of invertebrates and algal density and abundance; 2) To contribute to the conservation of the rocky intertidal habitat through education of students and visitors about intertidal species and the requirements for maintaining a healthy, diverse intertidal ecosystem; 3) To increase stewardship in the Gulf of the Farallones National Marine Sanctuary; and 4) To contribute abundance and population data on key algae and invertebrate species to the national database, LiMPETS (Long Term Monitoring Program & Experiential Training for Students). Student volunteers complete an intensive training course on the natural history of intertidal invertebrates and algae, identification of key species, rocky intertidal monitoring techniques, and history of the sanctuary. Students identify and count key invertebrate and algae species along two permanent transects (A and B) and using randomly determined points within a permanent 100 m2 area, three times per year (fall, winter, and late spring). Using the data collected since 2004, we will analyze the population densities, seasonal abundance and long-term population trends of key algal and invertebrate species. Future analyses and investigations will include intertidal abiotic factors (including water temperature and human foot-traffic) to enhance insights into the workings of the Duxbury Reef ecosystem, in particular, the high intertidal zone which experiences the greatest amount of human

Evolution of Immiscibly Blended Functionalized Polymers with Respect to Cure Parameters and Formulation

NASA Astrophysics Data System (ADS)

Heller, Nicholas Walter Medicus

powder form. TEM analysis additionally revealed the encapsulation of pigment particles by the domains, which helped explain the interaction between phase separation and pigment materials. The knowledge gained from fundamental characterization could be used to enable future generations of durable powder coatings with dead matte finishes.

Assessment of the trophic state of a hypersaline-carbonatic environment: Vermelha Lagoon (Brazil)

PubMed Central

Martins, Maria Virginia Alves; Frontalini, Fabrizio; Ballalai, João M.; Belart, Pierre; Habib, Renan; Fontana, Luiz F.; Clemente, Iara M. M. M.; Lorini, Maria Lucia; Mendonça Filho, João G.; Laut, Vanessa M.; Figueiredo, Marcos de Souza Lima

2017-01-01

Vermelha Lagoon is a hypersaline shallow transitional ecosystem in the state of Rio de Janeiro (Brazil). This lagoon is located in the protected area of Massambaba, between the cities of Araruama and Saquarema (Brazil), and displays two quite uncommon particularities: it exhibits carbonate sedimentation and displays the development of Holocene stromatolites. Due to both particularities, the salt industry and property speculation have been, increasingly, generating anthropic pressures on this ecosystem. This study aims to apply a multiproxy approach to evaluate the trophic state of Vermelha Lagoon based on physicochemical parameters and geochemical data for the quantification and qualification of organic matter (OM), namely total organic carbon (TOC), total sulfur (TS), total phosphorus (TP) and biopolymeric carbon (BPC), including carbohydrates (CHO), lipids (LIP) and proteins (PTN). The CHO/TOC ratio values suggest that OM supplied to the sediment is of autochthonous origin and results, essentially, from microbial activity. The cluster analyses allowed the identification of four regions in Vermelha Lagoon. The Region I included stations located in shallow areas of the eastern sector of Vermelha lagoon affected by the impact of the artificial channel of connection with Araruama Lagoon. The Region II, under the influence of salt pans, is characterized by the highest values of BPC, namely CHO promoted by microbiological activity. The Region III include stations spread through the lagoon with high values of dissolved oxygen and lower values of TP. Stromatolites and microbial mattes growth was observed in some stations of this sector. Region IV, where the highest values of TOC and TS were found, represents depocenters of organic matter, located in general in depressed areas. Results of this work evidences that the Vermelha Lagoon is an eutrophic but alkaline and well oxygenated environment (at both water column and surface sediment) where the autotrophic activity is

Vailulu'u Seamount, Samoa: Life and Death at the Edge of An Active Submarine Volcano

NASA Astrophysics Data System (ADS)

Vailulu'U Research Group, T.

2005-12-01

Exploration of Vailulu'u seamount (14°13'S; 169°04'W) by manned submersible, ROV, and surface ship revealed a new, 300m tall volcano that has grown in the summit crater in less than four years. This shows that Vailulu'u's eruption behavior is at this stage not predictable and continued growth could allow Vailulu'u to breach sea level within decades Several types of hydrothermal vents fill Vailulu'u crater with particulates that reduce visibility to less than a few meters in some regions. Hydrothermal solutions mix with seawater that enters the crater from its breaches to produce distinct biological habitats. Low temperature hydrothermal vents can produce Fe-oxide chimneys or up to one meter-thick microbial mats. Higher temperature vents (85°C) produce low salinity acidic fluids containing buoyant droplets of immiscible CO2. Low temperature hydrothermal vents at Nafanua summit (708m depth) support a thriving population of eels (Dysommia rusosa). The areas around the high temperature vents and the moat and remaining crater around the new volcano is almost devoid of any macroscopic life and is littered with fish, and mollusk carcasses that apparently died from exposure to hydrothermal fluid components in deeper crater waters. Acid- tolerant polychaetes adapt to this environment and feed near and on these carcasses. Vailulu'u presents a natural laboratory for the study of how seamounts and their volcanic systems interact with the hydrosphere to produce distinct biological habitats, and how marine life can adapt to these conditions or be trapped in a toxic volcanic system that leads to mass mortality. The Vailulu'u research team: Hubert Staudigel, Samantha Allen, Brad Bailey, Ed Baker, Sandra Brooke, Ryan Delaney, Blake English, Lisa Haucke, Stan Hart, John Helly, Ian Hudson, Matt Jackson, Daniel Jones, Alison Koleszar, Anthony Koppers, Jasper Konter, Laurent Montesi, Adele Pile, Ray Lee, Scott Mcbride, Julie Rumrill, Daniel Staudigel, Brad Tebo, Alexis Templeton

Esthetics: patients' perceptions of dental attractiveness.

PubMed

Dunn, W J; Murchison, D F; Broome, J C

1996-09-01

The importance of dentofacial attractiveness to the psychosocial well-being of an individual has been well established. Very little information is available regarding dental patient perceptions of a pleasing esthetic image. The purpose of this study was to identify factors distinctive to attractive smiles versus unattractive smiles, as perceived by patients. Standardized format photographs (5 x 7 in, matte finish, at f-32 and 1:2 magnification) of eight male and eight female smiles, framing only lips and teeth, were viewed by 297 subjects. The smiles exhibited differences in symmetry, tooth shade, number of teeth displayed, and height of maxillary lip line, and included both restored and unrestored teeth. Respondents ranked the photographs in order from most to least appealing appearance. Respondents viewed each series of photographs in a similar lighting and time period. A questionnaire identified the respondent's age, sex, race, education, income, and home town. Twenty-five demographic groups were established from the information in the questionnaire. Data were analyzed using stepwise discriminant analysis to determine the combination of smile characteristics that best predicted the ranking. The same female smile was chosen as the most attractive by 24 of the 25 demographic groups. This smile is characterized by natural teeth having light shade, high lip line, a large display of teeth, and radiating symmetry. Two female smiles typified by darker shade and asymmetry were rated by all groups as being least attractive. Two male smiles were judged equal as the most pleasing esthetically. Respondents favored those smiles characterized by light shade, a moderate display of teeth, moderate lip line, and a symmetrical arrangement of teeth. One male smile characterized by darker shade was rated as least attractive. In all cases, tooth shade was the most important factor, followed in sequence by unrestored natural teeth and number of teeth displayed. No correlation was

Pharmacological inhibition of calpain-1 prevents red cell dehydration and reduces Gardos channel activity in a mouse model of sickle cell disease

PubMed Central

De Franceschi, Lucia; Franco, Robert S.; Bertoldi, Mariarita; Brugnara, Carlo; Matté, Alessandro; Siciliano, Angela; Wieschhaus, Adam J.; Chishti, Athar H.; Joiner, Clinton H.

2013-01-01

Sickle cell disease (SCD) is a globally distributed hereditary red blood cell (RBC) disorder. One of the hallmarks of SCD is the presence of circulating dense RBCs, which are important in SCD-related clinical manifestations. In human dense sickle cells, we found reduced calpastatin activity and protein expression compared to either healthy RBCs or unfractionated sickle cells, suggesting an imbalance between activator and inhibitor of calpain-1 in favor of activator in dense sickle cells. Calpain-1 is a nonlysosomal cysteine proteinase that modulates multiple cell functions through the selective cleavage of proteins. To investigate the relevance of this observation in vivo, we evaluated the effects of the orally active inhibitor of calpain-1, BDA-410 (30 mg/kg/d), on RBCs from SAD mice, a mouse model for SCD. In SAD mice, BDA-410 improved RBC morphology, reduced RBC density (D20; from 1106±0.001 to 1100±0.001 g/ml; P<0.05) and increased RBC-K+ content (from 364±10 to 429±12.3 mmol/kg Hb; P<0.05), markedly reduced the activity of the Ca2+-activated K+channel (Gardos channel), and decreased membrane association of peroxiredoxin-2. The inhibitory effect of calphostin C, a specific inhibitor of protein kinase C (PKC), on the Gardos channel was eliminated after BDA-410 treatment, which suggests that calpain-1 inhibition affects the PKC-dependent fraction of the Gardos channel. BDA-410 prevented hypoxia-induced RBC dehydration and K+ loss in SAD mice. These data suggest a potential role of BDA-410 as a novel therapeutic agent for treatment of SCD.—De Franceschi, L., Franco, R. S., Bertoldi, M., Brugnara, C., Matté, A., Siciliano, A., Wieschhaus, A. J., Chishti, A. H., Joiner, C. H. Pharmacological inhibition of calpain-1 prevents red cell dehydration and reduces Gardos channel activity in a mouse model of sickle cell disease. PMID:23085996

Classification of very high resolution satellite remote sensing data in a pilot phase of the forest cover classification of the Democratic Republic of Congo, Forêts d'Afrique Central Evaluées par Télédetection (FACET) product

NASA Astrophysics Data System (ADS)

Singa Monga Lowengo, C.

2012-12-01

The Observatoire Satellital des Forêts d'Afrique Centrale (OSFAC) based in Kinshasa, serves as the focal point of the GOFC-GOLD network for Central Africa. OSFAC's long term objective is building regional capacity to use remotely sensed data to map forest cover and forest cover change across Central Africa. OSFAC archives and disseminates satellite data, offers training in geospatial data applications in coordination with the University of Kinshasa, and provides technical support to CARPE partners. Forêts d'Afrique Centrale Évaluées par Télédétection (FACET) is an OSFAC initiative that implements the UMD/SDSU methodology at the national level and quantitatively evaluates the spatiotemporal dynamics of forest cover in Central Africa. The multi-temporal series of FACET data is a useful contribution to many projects, such as biodiversity monitoring, climate modeling, conservation, natural resource management, land use planning, agriculture and REDD+. I am working as Remote Sensing and GIS Officer in various projects of OSFAC. My activities include forest cover and lands dynamics monitoring in Congo Basin. I am familiar with the use of digital mapping software, GIS and RS (Arc GIS, ENVI and PCI Geomatica etc.), classification and spatial Analysis of satellite images, 3D modeling, etc. I started as an intern at OSFAC, Assistant Trainer (Professional Training) and Consultant than permanent employee since October 2009. To assist in the OSFAC activities regarding the monitoring of forest cover and the CARPE program in the context of natural resources management, I participated in the development of the FACET Atlas (Republic of Congo). I received data from Matt Hansen (map.img), WRI and Brazzaville (shapefiles). With all these data I draw maps of the ROC Atlas and statistics of forest cover and forest loss. We organize field work on land to collect data to validate the FACET product. Therefore, to assess forest cover in the region of Kwamouth and Kahuzi-Maiko Biega

Geometric validation of MV topograms for patient localization on TomoTherapy

NASA Astrophysics Data System (ADS)

Blanco Kiely, Janid P.; White, Benjamin M.; Low, Daniel A.; Qi, Sharon X.

2016-01-01

Our goal was to geometrically validate the use of mega-voltage orthogonal scout images (MV topograms) as a fast and low-dose alternative to mega-voltage computed tomography (MVCT) for daily patient localization on the TomoTherapy system. To achieve this, anthropomorphic head and pelvis phantoms were imaged on a 16-slice kilo-voltage computed tomography (kVCT) scanner to synthesize kilo-voltage digitally reconstructed topograms (kV-DRT) in the Tomotherapy detector geometry. MV topograms were generated for couch speeds of 1-4 cm s-1 in 1 cm s-1 increments with static gantry angles in the anterior-posterior and left-lateral directions. Phantoms were rigidly translated in the anterior-posterior (AP), superior-inferior (SI), and lateral (LAT) directions to simulate potential setup errors. Image quality improvement was demonstrated by estimating the noise level in the unenhanced and enhanced MV topograms using a principle component analysis-based noise level estimation algorithm. Average noise levels for the head phantom were reduced by 2.53 HU (AP) and 0.18 HU (LAT). The pelvis phantom exhibited average noise level reduction of 1.98 HU (AP) and 0.48 HU (LAT). Mattes Mutual Information rigid registration was used to register enhanced MV topograms with corresponding kV-DRT. Registration results were compared to the known rigid displacements, which assessed the MV topogram localization’s sensitivity to daily positioning errors. Reduced noise levels in the MV topograms enhanced the registration results so that registration errors were  <1 mm. The unenhanced head MV topograms had discrepancies  <2.1 mm and the pelvis topograms had discrepancies  <2.7 mm. Result were found to be consistent regardless of couch speed. In total, 64.7% of the head phantom MV topograms and 60.0% of the pelvis phantom MV topograms exactly measured the phantom offsets. These consistencies demonstrated the potential for daily patient positioning using MV topogram pairs in the

Dissemination and genetic diversity of chlamydial agents in Polish wildfowl: Isolation and molecular characterisation of avian Chlamydia abortus strains.

PubMed

Szymańska-Czerwińska, Monika; Mitura, Agata; Niemczuk, Krzysztof; Zaręba, Kinga; Jodełko, Agnieszka; Pluta, Aneta; Scharf, Sabine; Vitek, Bailey; Aaziz, Rachid; Vorimore, Fabien; Laroucau, Karine; Schnee, Christiane

2017-01-01

Wild birds are considered as a reservoir for avian chlamydiosis posing a potential infectious threat to domestic poultry and humans. Analysis of 894 cloacal or fecal swabs from free-living birds in Poland revealed an overall Chlamydiaceae prevalence of 14.8% (n = 132) with the highest prevalence noted in Anatidae (19.7%) and Corvidae (13.4%). Further testing conducted with species-specific real-time PCR showed that 65 samples (49.2%) were positive for C. psittaci whereas only one was positive for C. avium. To classify the non-identified chlamydial agents and to genotype the C. psittaci and C. avium-positive samples, specimens were subjected to ompA-PCR and sequencing (n = 83). The ompA-based NJ dendrogram revealed that only 23 out of 83 sequences were assigned to C. psittaci, in particular to four clades representing the previously described C. psittaci genotypes B, C, Mat116 and 1V. Whereas the 59 remaining sequences were assigned to two new clades named G1 and G2, each one including sequences recently obtained from chlamydiae detected in Swedish wetland birds. G1 (18 samples from Anatidae and Rallidae) grouped closely together with genotype 1V and in relative proximity to several C. abortus isolates, and G2 (41 samples from Anatidae and Corvidae) grouped closely to C. psittaci strains of the classical ABE cluster, Matt116 and M56. Finally, deep molecular analysis of four representative isolates of genotypes 1V, G1 and G2 based on 16S rRNA, IGS and partial 23S rRNA sequences as well as MLST clearly classify these isolates within the C. abortus species. Consequently, we propose an expansion of the C. abortus species to include not only the classical isolates of mammalian origin, but also avian isolates so far referred to as atypical C. psittaci or C. psittaci/C. abortus intermediates.

Contact skin temperature measurements and associated effects of obstructing local sweat evaporation during mild exercise-induced heat stress.

PubMed

MacRae, Braid A; Rossi, Rene Michel; Psikuta, Agnes; Spengler, Christina M; Annaheim, Simon

2018-06-05

Locally increasing evaporative resistance is one mechanism by which contact skin temperature (Tsk) sensors and their attachments may disturb the temperature of the skin site being measured. We aimed to determine the extent to which an obstruction of evaporation affects local Tsk during exercise-induced sweating and how this compares to the Tsk measured using a conventional contact Tsk sensor. Twelve adult males each completed one experimental session (~24°C, ~46 % relative humidity; RH) involving seated rest and exercise (cycle ergometer). Air velocity was ~0.5 m·s-1 during rest and ~1 m·s-1 during exercise. Tsk of the right posterolateral forearm was measured using fine-wire thermocouples (0.125 mm diameter; chosen for minimal sensor-related disturbance) under two concurrent experimental conditions: uncovered or directly covered by a moisture-impermeable matte-black aluminium foil (thickness 0.08 mm, area 15 mm x 22 mm). The adjacent Tsk was also measured using an iButton attached with a nonwoven medical tape. Changes in next-to-skin absolute vapour pressure were used to estimate the onset of sweating. During exercise, covered thermocouple temperatures were consistently warmer than those uncovered. These differences were small before the onset of sweating (0.1°C, p=0.16), but increased thereafter (0.6 and 1.0°C by minutes 15 and 30 of exercise, respectively; p≤0.03). For change scores from baseline rest, the iButton-measured Tsk was as much as 0.7°C warmer than uncovered and -0.4°C cooler than covered thermocouples during sweating, but differences were not statistically supported and with wide 95% limits of agreement (up to ±3.1°C). When delineated, a small obstruction of evaporation itself caused an overestimation of Tsk during exercise although, while demonstrable, these effects were less clear in the context of using a conventional contact Tsk sensor and attachment. © 2018 Institute of Physics and Engineering in Medicine.

Angular Momentum Evolution in Young Low Mass Stars

NASA Astrophysics Data System (ADS)

Pinzón, G.; de La Reza, R.

2006-06-01

During the last decades, the study of rotation in young low mass stars has been one of the more active areas in the field of stellar evolution. Many theoretical efforts have been made to understand the angular momentum evolution and our picture now, reveals the main role of the stellar magnetic field in all pre-main sequence stage (Ghosh & Lamb 1979, ApJ, 234, 296; Cameron & Campbell 1993, A&A, 274, 309; Cameron & Campbell 1995, A&A, 298, 133; Kúker, Henning, & Rúdiger 2003, ApJ, 589, 397; Matt & Pudritz 2005, MNRAS, 356, 167). The mean rotation of most of the cool low mass stars remains roughly constant during the T Tauri stage. This can be explained by the disc locking scenario. This paradigm suggest that star start out as CTTS with periods of 4-14 days, perhaps locked to their disc, and that this disc is eventually lost mainly by accretion. At the current time, it is not clear that this is true for all low mass stars. Some authors have questioned its validity for stars less massive than 0.5 solar masses. Although the reality may eventually turn out to be considerably more complex, a simple consideration of the effects of and limits on disc locking of young low mass stars seems necessary.We have investigated the exchange of angular momentum between a low mass star and an accretion disc during the Hayashi Track (Pinzón, Kúker, & de la Reza 2005, in preparation) and also along the first 100Myr of stellar evolution. The model incorporates changes in the star's moment of inertia, magnetic field strength (Elstner & Rúdiger 2000, A&A, 358, 612), angular momentum loss by a magnetic wind and an exponential decrease of the accretion rate. The lifetime of the accretion disc is a free parameter in our model. The resulting rotation rates are in agreement with observed vsin and photometric periods for young stars belonging to co-moving groups and open young clusters.

Comparing the intra-annual wood formation of three European species (Fagus sylvatica, Quercus petraea and Pinus sylvestris) as related to leaf phenology and non-structural carbohydrate dynamics.

PubMed

Michelot, Alice; Simard, Sonia; Rathgeber, Cyrille; Dufrêne, Eric; Damesin, Claire

2012-08-01

Monitoring cambial phenology and intra-annual growth dynamics is a useful approach for characterizing the tree growth response to climate change. However, there have been few reports concerning intra-annual wood formation in lowland temperate forests with high time resolution, especially for the comparison between deciduous and coniferous species. The main objective of this study was to determine how the timing, duration and rate of radial growth change between species as related to leaf phenology and the dynamics of non-structural carbohydrates (NSC) under the same climatic conditions. We studied two deciduous species, Fagus sylvatica L. and Quercus petraea (Matt.) Liebl., and an evergreen conifer, Pinus sylvestris L. During the 2009 growing season, we weekly monitored (i) the stem radial increment using dendrometers, (ii) the xylem growth using microcoring and (iii) the leaf phenology from direct observations of the tree crowns. The NSC content was also measured in the eight last rings of the stem cores in April, June and August 2009. The leaf phenology, NSC storage and intra-annual growth were clearly different between species, highlighting their contrasting carbon allocation. Beech growth began just after budburst, with a maximal growth rate when the leaves were mature and variations in the NSC content were low. Thus, beech radial growth seemed highly dependent on leaf photosynthesis. For oak, earlywood quickly developed before budburst, which probably led to the starch decrease quantified in the stem from April to June. For pine, growth began before the needles unfolding and the lack of NSC decrease during the growing season suggested that the substrates for radial growth were new assimilates of the needles from the previous year. Only for oak, the pattern determined from the intra-annual growth measured using microcoring differed from the pattern determined from dendrometer data. For all species, the ring width was significantly influenced by growth duration

Unravelling spatiotemporal tree-ring signals in Mediterranean oaks: a variance-covariance modelling approach of carbon and oxygen isotope ratios.

PubMed

Shestakova, Tatiana A; Aguilera, Mònica; Ferrio, Juan Pedro; Gutiérrez, Emilia; Voltas, Jordi

2014-08-01

Identifying how physiological responses are structured across environmental gradients is critical to understanding in what manner ecological factors determine tree performance. Here, we investigated the spatiotemporal patterns of signal strength of carbon isotope discrimination (Δ(13)C) and oxygen isotope composition (δ(18)O) for three deciduous oaks (Quercus faginea (Lam.), Q. humilis Mill. and Q. petraea (Matt.) Liebl.) and one evergreen oak (Q. ilex L.) co-occurring in Mediterranean forests along an aridity gradient. We hypothesized that contrasting strategies in response to drought would lead to differential climate sensitivities between functional groups. Such differential sensitivities could result in a contrasting imprint on stable isotopes, depending on whether the spatial or temporal organization of tree-ring signals was analysed. To test these hypotheses, we proposed a mixed modelling framework to group isotopic records into potentially homogeneous subsets according to taxonomic or geographical criteria. To this end, carbon and oxygen isotopes were modelled through different variance-covariance structures for the variability among years (at the temporal level) or sites (at the spatial level). Signal-strength parameters were estimated from the outcome of selected models. We found striking differences between deciduous and evergreen oaks in the organization of their temporal and spatial signals. Therefore, the relationships with climate were examined independently for each functional group. While Q. ilex exhibited a large spatial dependence of isotopic signals on the temperature regime, deciduous oaks showed a greater dependence on precipitation, confirming their higher susceptibility to drought. Such contrasting responses to drought among oak types were also observed at the temporal level (interannual variability), with stronger associations with growing-season water availability in deciduous oaks. Thus, our results indicate that Mediterranean deciduous

Evaluation of the uncertainty in an EBT3 film dosimetry system utilizing net optical density.

PubMed

Marroquin, Elsa Y León; Herrera González, José A; Camacho López, Miguel A; Barajas, José E Villarreal; García-Garduño, Olivia A

2016-09-08

Radiochromic film has become an important tool to verify dose distributions for intensity-modulated radiotherapy (IMRT) and quality assurance (QA) procedures. A new radiochromic film model, EBT3, has recently become available, whose composition and thickness of the sensitive layer are the same as those of previous EBT2 films. However, a matte polyester layer was added to EBT3 to prevent the formation of Newton's rings. Furthermore, the symmetrical design of EBT3 allows the user to eliminate side-orientation dependence. This film and the flatbed scanner, Epson Perfection V750, form a dosimetry system whose intrinsic characteristics were studied in this work. In addition, uncertainties associated with these intrinsic characteristics and the total uncertainty of the dosimetry system were determined. The analysis of the response of the radiochromic film (net optical density) and the fitting of the experimental data to a potential function yielded an uncertainty of 2.6%, 4.3%, and 4.1% for the red, green, and blue channels, respectively. In this work, the dosimetry system presents an uncertainty in resolving the dose of 1.8% for doses greater than 0.8 Gy and less than 6 Gy for red channel. The films irradiated between 0 and 120 Gy show differences in the response when scanned in portrait or landscape mode; less uncertainty was found when using the portrait mode. The response of the film depended on the position on the bed of the scanner, contributing an uncertainty of 2% for the red, 3% for the green, and 4.5% for the blue when placing the film around the center of the bed of scanner. Furthermore, the uniformity and reproducibility radiochromic film and reproducibility of the response of the scanner contribute less than 1% to the overall uncertainty in dose. Finally, the total dose uncertainty was 3.2%, 4.9%, and 5.2% for red, green, and blue channels, respectively. The above uncertainty values were obtained by mini-mizing the contribution to the total dose uncertainty

Linking Late Miocene Magmatism and Exhumation of the Pamir-West Kunlun Mountains to Lithospheric Thinning

NASA Astrophysics Data System (ADS)

Cao, K.; Wang, G.; Zeng, Z.; Replumaz, A.

2016-12-01

In this study, we report newly-discovered potassic plutons emplaced at 11 Ma in the SE Pamir. Together with recently-reported volcanism at 12 Ma in the West Kunlun Mts. (Cao et al., 2015), it can be inferred that Late Miocene magmas extend from the north-central Tibet to the central Pamir. Furthermore, our new apatite fission-track analysis in the SE Pamir-West Kunlun Mountains present uniform ages clustering at 11-6 Ma. Forward and inverse modeling indicate Late Miocene ( 11-6 Ma) rapid exhumation of the SE Pamir-West Kunlun Mountains, concurrent with accelerated exhumation of the Shakhdara dome (Stübner et al., 2013), initial doming of the Muztagata massif (Robinson et al., 2007; Sobel et al., 2011; Cao et al., 2013), and thrusting of the front faults along Pamir-West Kunlun Mts. (Bershaw et al., 2012; Cao et al., 2013, 2015). The simultaneous doming and potassic magmatism could attributed to stress relaxation of the upper crust at that time, possibly driven by the thinning of lower lithosphere beneath Pamir-West Kunlun Mts.. Such plausible mechanisms could be responsible for Neogene magmatism, rock exhumation and plateau growth in northwestern Tibet. At the continental scale, our results support that the Tibetan Plateau underwent a Late Miocene phase of deformation and developed outward and upward since then (Molnar et al., 2012). Three representative models are proposed to account for Late Miocene magmatism and crustal deformation in northern Tibet, including 1) southward subduction of the Tarim lithosphere mantle (Matte et al., 1996; Wittlinger et al., 2004), 2) convective removal of lower lithosphere (Molnar et al., 1993; Turner et al., 1993, 1996), and 3) penetration of molten crust into Kunlun terrane (Le Pape et al., 2012; Wang et al., 2012). Our results allow to discuss these competing models in the western Tibet, to better understand the intracontinent orogenesis in central Asia, in which the lithospheric processes have led to upper crust deformation.

Iterative refinement of structure-based sequence alignments by Seed Extension

PubMed Central

Kim, Changhoon; Tai, Chin-Hsien; Lee, Byungkook

2009-01-01

Background Accurate sequence alignment is required in many bioinformatics applications but, when sequence similarity is low, it is difficult to obtain accurate alignments based on sequence similarity alone. The accuracy improves when the structures are available, but current structure-based sequence alignment procedures still mis-align substantial numbers of residues. In order to correct such errors, we previously explored the possibility of replacing the residue-based dynamic programming algorithm in structure alignment procedures with the Seed Extension algorithm, which does not use a gap penalty. Here, we describe a new procedure called RSE (Refinement with Seed Extension) that iteratively refines a structure-based sequence alignment. Results RSE uses SE (Seed Extension) in its core, which is an algorithm that we reported recently for obtaining a sequence alignment from two superimposed structures. The RSE procedure was evaluated by comparing the correctly aligned fractions of residues before and after the refinement of the structure-based sequence alignments produced by popular programs. CE, DaliLite, FAST, LOCK2, MATRAS, MATT, TM-align, SHEBA and VAST were included in this analysis and the NCBI's CDD root node set was used as the reference alignments. RSE improved the average accuracy of sequence alignments for all programs tested when no shift error was allowed. The amount of improvement varied depending on the program. The average improvements were small for DaliLite and MATRAS but about 5% for CE and VAST. More substantial improvements have been seen in many individual cases. The additional computation times required for the refinements were negligible compared to the times taken by the structure alignment programs. Conclusion RSE is a computationally inexpensive way of improving the accuracy of a structure-based sequence alignment. It can be used as a standalone procedure following a regular structure-based sequence alignment or to replace the traditional

On the colour of wing scales in butterflies: iridescence and preferred orientation of single gyroid photonic crystals

PubMed Central

2017-01-01

Lycaenid butterflies from the genera Callophrys, Cyanophrys and Thecla have evolved remarkable biophotonic gyroid nanostructures within their wing scales that have only recently been replicated by nanoscale additive manufacturing. These nanostructures selectively reflect parts of the visible spectrum to give their characteristic non-iridescent, matte-green appearance, despite a distinct blue–green–yellow iridescence predicted for individual crystals from theory. It has been hypothesized that the organism must achieve its uniform appearance by growing crystals with some restrictions on the possible distribution of orientations, yet preferential orientation observed in Callophrys rubi confirms that this distribution need not be uniform. By analysing scanning electron microscope and optical images of 912 crystals in three wing scales, we find no preference for their rotational alignment in the plane of the scales. However, crystal orientation normal to the scale was highly correlated to their colour at low (conical) angles of view and illumination. This correlation enabled the use of optical images, each containing up to 104–105 crystals, for concluding the preferential alignment seen along the at the level of single scales, appears ubiquitous. By contrast, orientations were found to occur at no greater rate than that expected by chance. Above a critical cone angle, all crystals reflected bright green light indicating the dominant light scattering is due to the predicted band gap along the direction, independent of the domain orientation. Together with the natural variation in scale and wing shapes, we can readily understand the detailed mechanism of uniform colour production and iridescence suppression in these butterflies. It appears that the combination of preferential alignment normal to the wing scale, and uniform distribution within the plane is a near optimal solution for homogenizing the angular distribution of the band gap relative to the wings. Finally

Correction of terrestrial LiDAR intensity channel using Oren-Nayar reflectance model: An application to lithological differentiation

NASA Astrophysics Data System (ADS)

Carrea, Dario; Abellan, Antonio; Humair, Florian; Matasci, Battista; Derron, Marc-Henri; Jaboyedoff, Michel

2016-03-01

Ground-based LiDAR has been traditionally used for surveying purposes via 3D point clouds. In addition to XYZ coordinates, an intensity value is also recorded by LiDAR devices. The intensity of the backscattered signal can be a significant source of information for various applications in geosciences. Previous attempts to account for the scattering of the laser signal are usually modelled using a perfect diffuse reflection. Nevertheless, experience on natural outcrops shows that rock surfaces do not behave as perfect diffuse reflectors. The geometry (or relief) of the scanned surfaces plays a major role in the recorded intensity values. Our study proposes a new terrestrial LiDAR intensity correction, which takes into consideration the range, the incidence angle and the geometry of the scanned surfaces. The proposed correction equation combines the classical radar equation for LiDAR with the bidirectional reflectance distribution function of the Oren-Nayar model. It is based on the idea that the surface geometry can be modelled by a relief of multiple micro-facets. This model is constrained by only one tuning parameter: the standard deviation of the slope angle distribution (σslope) of micro-facets. Firstly, a series of tests have been carried out in laboratory conditions on a 2 m2 board covered by black/white matte paper (perfect diffuse reflector) and scanned at different ranges and incidence angles. Secondly, other tests were carried out on rock blocks of different lithologies and surface conditions. Those tests demonstrated that the non-perfect diffuse reflectance of rock surfaces can be practically handled by the proposed correction method. Finally, the intensity correction method was applied to a real case study, with two scans of the carbonate rock outcrop of the Dents-du-Midi (Swiss Alps), to improve the lithological identification for geological mapping purposes. After correction, the intensity values are proportional to the intrinsic material reflectance

On the colour of wing scales in butterflies: iridescence and preferred orientation of single gyroid photonic crystals.

PubMed

Corkery, Robert W; Tyrode, Eric C

2017-08-06

Lycaenid butterflies from the genera Callophrys , Cyanophrys and Thecla have evolved remarkable biophotonic gyroid nanostructures within their wing scales that have only recently been replicated by nanoscale additive manufacturing. These nanostructures selectively reflect parts of the visible spectrum to give their characteristic non-iridescent, matte-green appearance, despite a distinct blue-green-yellow iridescence predicted for individual crystals from theory. It has been hypothesized that the organism must achieve its uniform appearance by growing crystals with some restrictions on the possible distribution of orientations, yet preferential orientation observed in Callophrys rubi confirms that this distribution need not be uniform. By analysing scanning electron microscope and optical images of 912 crystals in three wing scales, we find no preference for their rotational alignment in the plane of the scales. However, crystal orientation normal to the scale was highly correlated to their colour at low (conical) angles of view and illumination. This correlation enabled the use of optical images, each containing up to 10 4 -10 5 crystals, for concluding the preferential alignment seen along the [Formula: see text] at the level of single scales, appears ubiquitous. By contrast, [Formula: see text] orientations were found to occur at no greater rate than that expected by chance. Above a critical cone angle, all crystals reflected bright green light indicating the dominant light scattering is due to the predicted band gap along the [Formula: see text] direction, independent of the domain orientation. Together with the natural variation in scale and wing shapes, we can readily understand the detailed mechanism of uniform colour production and iridescence suppression in these butterflies. It appears that the combination of preferential alignment normal to the wing scale, and uniform distribution within the plane is a near optimal solution for homogenizing the angular

Multiple Phase Transitions in the model multiferroic BiFeO3

NASA Astrophysics Data System (ADS)

Kreisel, Jens

2012-02-01

Bismuth ferrite BiFeO3 (BFO) is commonly considered a model system for multiferroics, and is perhaps the only material that is both magnetic and a ferroelectric with a strong electric polarization at 300K [1]. Despite numerous investigations, the crystal structures of BFO as a function of temperature and pressure are still not established and lead to ongoing controversial reports in the literature [1,3]. Besides being a model multiferroic, BFO is also one of the very few materials that present both octahedra tilts and strong cation displacements at room temperature. Here we report the high-pressure phase transitions in BFO by both synchrotron x-ray diffraction and Raman spectroscopy, namely a surprising richness of six phase transitions in the 0--60 GPa range [2-3]. At low pressures, 4 transitions are evidenced at 4, 6, 7 and 11 GPa. In this range, the crystals display in that range unusual large unit cells and complex domain structures, which suggests a competition between complex tilt systems and possibly off-center cation displacements. The non polar Pnma phase remains stable over a large pressure range between 11 and 38 GPa. The two high pressure phase transitions at 38 and 48 GPa are marked by the occurrence of larger unit cells and an increase of the distortion away from the cubic parent perovskite cell. The previously reported insulator-to-metal transition appears to be symmetry breaking. Finally, we will present a new schematic P-T phase diagram for BFO and discuss the recently reported phase transition in highly strained BFO films [4,5] in the light of our high-pressure findings. [4pt] [1] G. Catalan, J. F. Scott, Advanced Materials 21, 1 (2009).[0pt] [2] R. Haumont et al., Phys. Rev. B 79, 184110 (2009).[0pt] [3] M. Guennou et al., Phys. Rev. B 2011, accepted http://arxiv.org/abs/1108.0704.2011[0pt] [4] J. Kreisel et al. J. Phys.: Cond. Matt. 23, 342202 (2011).[0pt] [5] W. Siemons et al. Appl. Phys. Express 4 (2011).

Dissemination and genetic diversity of chlamydial agents in Polish wildfowl: Isolation and molecular characterisation of avian Chlamydia abortus strains

PubMed Central

Szymańska-Czerwińska, Monika; Mitura, Agata; Niemczuk, Krzysztof; Zaręba, Kinga; Jodełko, Agnieszka; Pluta, Aneta; Scharf, Sabine; Vitek, Bailey; Aaziz, Rachid; Vorimore, Fabien; Laroucau, Karine; Schnee, Christiane

2017-01-01

Wild birds are considered as a reservoir for avian chlamydiosis posing a potential infectious threat to domestic poultry and humans. Analysis of 894 cloacal or fecal swabs from free-living birds in Poland revealed an overall Chlamydiaceae prevalence of 14.8% (n = 132) with the highest prevalence noted in Anatidae (19.7%) and Corvidae (13.4%). Further testing conducted with species-specific real-time PCR showed that 65 samples (49.2%) were positive for C. psittaci whereas only one was positive for C. avium. To classify the non-identified chlamydial agents and to genotype the C. psittaci and C. avium-positive samples, specimens were subjected to ompA-PCR and sequencing (n = 83). The ompA-based NJ dendrogram revealed that only 23 out of 83 sequences were assigned to C. psittaci, in particular to four clades representing the previously described C. psittaci genotypes B, C, Mat116 and 1V. Whereas the 59 remaining sequences were assigned to two new clades named G1 and G2, each one including sequences recently obtained from chlamydiae detected in Swedish wetland birds. G1 (18 samples from Anatidae and Rallidae) grouped closely together with genotype 1V and in relative proximity to several C. abortus isolates, and G2 (41 samples from Anatidae and Corvidae) grouped closely to C. psittaci strains of the classical ABE cluster, Matt116 and M56. Finally, deep molecular analysis of four representative isolates of genotypes 1V, G1 and G2 based on 16S rRNA, IGS and partial 23S rRNA sequences as well as MLST clearly classify these isolates within the C. abortus species. Consequently, we propose an expansion of the C. abortus species to include not only the classical isolates of mammalian origin, but also avian isolates so far referred to as atypical C. psittaci or C. psittaci/C. abortus intermediates. PMID:28350846

Short-term hunger intensity changes following ingestion of a meal replacement bar for weight control.

PubMed

Rothacker, Dana Q; Watemberg, Salo

2004-05-01

Meal replacement products for weight loss are popular and safe for most unsupervised consumers desiring to lose weight. Previously we reported that the thickness of meal replacement diet shakes had a direct and significant effect on hunger intensity during the first 2 h and that hunger intensity scores for liquid meal replacements were significantly below baseline for 3 h following consumption (Mattes & Rothacker, 2001) This study uses the same protocol to investigate meal replacement bars designed for overweight consumers. Subjects were prescreened to include only those that normally ate breakfast and liked chocolate. The bar used in this study contained 250 calories (about 30 more than most liquid diet shakes), 4 g dietary fiber, 14 g protein and 8 g fat. Subjects were instructed to consume the entire bar with a glass of water following an overnight fast when they would normally consume their first meal of the day and to assess their hunger on a 1 (not hungry at all) to 9 (as hungry as I have ever felt) scale before consumption, immediately after and hourly for 6 h (only on typical weekdays). Similar assessments were made for the perception of stomach fullness (1=empty, 9=extremely full), strength of the desire to eat (1=no desire, 9=extremely strong) and thirst (1=not at all thirsty, 9=extremely thirsty). One-hundred and eight subjects (23 male and 85 female) completed the study. No gender satiety differences were found. Hunger ratings and desire to eat remained significantly below baseline for 5 h following consumption. Stomach fullness scores were significantly above baseline for 5 h. Thirst scores were significantly below baseline for 3 h. In conclusion, although the meal replacement diet bars contained only 30 additional calories than liquids, they provided an additional 2 h of hunger suppression from baseline that may have an impact on overall weightloss success. These results support superior short-term hunger control with solid meal replacements.

Numerical Simulations of Granular Processes

NASA Astrophysics Data System (ADS)

Richardson, Derek C.; Michel, Patrick; Schwartz, Stephen R.; Ballouz, Ronald-Louis; Yu, Yang; Matsumura, Soko

2014-11-01

. Matt. 14, 363. [4] Schwartz, S.R. et al. 2013, Icarus 226, 67; [5] Schwartz, S.R. et al. 2014, P&SS, 10.1016/j.pss.2014.07.013; [6] Yu, Y. et al. 2014, Icarus, 10.1016/j.icarus.2014.07.027; [7] Matsumura, S. et al. 2014, MNRAS, 10.1093/mnras/stu1388.

Time-Resolved Infrared Reflectance Studies of the Dehydration-Induced Transformation of Uranyl Nitrate Hexahydrate to the Trihydrate Form

DOE Office of Scientific and Technical Information (OSTI.GOV)

Johnson, Timothy J.; Sweet, Lucas E.; Meier, David E.

Uranyl nitrate is a key species in the nuclear fuel cycle. However, this species is known to exist in different states of hydration, including the hexahydrate ([UO2(NO3)2(H2O)6] often called UNH), the trihydrate [UO2(NO3)2(H2O)3 or UNT], and in very dry environments the dihydrate form [UO2(NO3)2(H2O)2]. Their relative stabilities depend on both water vapor pressure and temperature. In the 1950s and 1960s the different phases were studied by infrared transmission spectroscopy, but were limited both by instrumental resolution and by the ability to prepare the samples for transmission. We have revisited this problem using time-resolved reflectance spectroscopy, which requires no sample preparationmore » and allows dynamic analysis while the sample is exposed to a flow of N2 gas. Samples of known hydration state were prepared and confirmed via X-ray diffraction patterns of known species. In reflectance mode the hexahydrate UO2(NO3)2(H2O)6 has a distinct uranyl asymmetric stretch band at 949.0 cm-1 that shifts to shorter wavelengths and broadens as the sample desiccates and recrystallizes to the trihydrate, first as a shoulder growing in on the blue edge but ultimately results in a doublet band with reflectance peaks at 966 and 957 cm-1. The data are consistent with transformation from UNH to UNT as UNT has two inequivalent UO22+ sites. The dehydration of UO2(NO3)2(H2O)6 to UO2(NO3)2(H2O)3 is both a structural and morphological change that has the lustrous lime green UO2(NO3)2(H2O)6 crystals changing to the matte greenish yellow of the trihydrate solid. The phase transformation and crystal structures were confirmed by density functional theory calculations and optical microscopy methods, both of which showed a transformation with two distinct sites for the uranyl cation in the trihydrate, with but one in the hexahydrate.« less

Spatial Shifts in Tidal-Fluvial Environments

NASA Astrophysics Data System (ADS)

Dykstra, S. L.; Dzwonkowski, B.

2017-12-01

Fresh water discharge damps tidal propagation and increases the phase lag, which has important impacts on system-wide sediment transport process and ecological structure. Here, the role of discharge on spatial variability in the dynamics of tidal rivers is investigated in Mobile Bay and Delta, a microtidal diurnal system where discharge ranges multiple orders of magnitude. Long-term observations at 7 velocity stations and 20 water level stations, ranging over 260km along the system, were analyzed. Observations of the tidal extinguishing point in both velocity and water level were highly variable with significant shifts in location covering a distance over 140km. The velocity stations also allowed for measuring the extent of flood (i.e. point where tidal flow is arrested by discharge) shifting 100km. With increased discharge, flow characteristics at station locations can transition from an estuary (i.e. bidirectional tidal flow) to a tidal river to a traditional fluvial environment. This revealed systematic discharge induced damping and an increase in phase lag. Interestingly, before damping occurs, the tide amplifies ( 15%) seaward of the extent of flood. Another consistent pattern is the higher sensitivity of the velocity signal to discharge than water level. This causes the velocity to lag more and create progressive tides. In a microtidal diurnal system, the signal propagates further inland than a semidiurnal tide due to its lower frequency but is easily damped due to the small amplitude, creating large shifts. Previous research has focused on environments dominated by semidiurnal tides with similar magnitudes to discharge using water level observations. For example, the well studied Columbia and the St. Lawrence rivers have small shifts in their tidal extinguishing point O(10km) (Jay 2016, Matte 2014). These shifts are not large enough to observe process like discharge-induced amplification and damping at the same site like in the Mobile system, but they may

Near-surface Thermal Infrared Imaging of a Mixed Forest

NASA Astrophysics Data System (ADS)

Aubrecht, D. M.; Helliker, B. R.; Richardson, A. D.

2014-12-01

Measurement of an organism's temperature is of basic physiological importance and therefore necessary for ecosystem modeling, yet most models derive leaf temperature from energy balance arguments or assume it is equal to air temperature. This is because continuous, direct measurement of leaf temperature outside of a controlled environment is difficult and rarely done. Of even greater challenge is measuring leaf temperature with the resolution required to understand the underlying energy balance and regulation of plant processes. To measure leaf temperature through the year, we have mounted a high-resolution, thermal infrared camera overlooking the canopy of a temperate deciduous forest. The camera is co-located with an eddy covariance system and a suite of radiometric sensors. Our camera measures longwave thermal infrared (λ = 7.5-14 microns) using a microbolometer array. Suspended in the canopy within the camera FOV is a matte black copper plate instrumented with fine wire thermocouples that acts as a thermal reference for each image. In this presentation, I will discuss the challenges of continuous, long-term field operation of the camera, as well as measurement sensitivity to physical and environmental parameters. Based on this analysis, I will show that the uncertainties in converting radiometric signal to leaf temperature are well constrained. The key parameter for minimizing uncertainty is the emissivity of the objects being imaged: measuring the emissivity to within 0.01 enables leaf temperature to be calculated to within 0.5°C. Finally, I will present differences in leaf temperature observed amongst species. From our two-year record, we characterize high frequency, daily, and seasonal thermal signatures of leaves and crowns, in relation to environmental conditions. Our images are taken with sufficient spatial and temporal resolution to quantify the preferential heating of sunlit portions of the canopy and the cooling effect of wind gusts. Future work will

Phototoxic effect of aluminium-chlorine and aluminium-hydroxide phthalocyanines on Leishmania (l.) amazonensis.

PubMed

Nesi-Reis, V; Navasconi, T R; Lera-Nosone, D S S L; Oliveira, E L; Barbosa, P M; Caetano, W; Silveira, T G V; Aristides, S M A; Hioka, N; Lonardoni, M V C

2018-03-01

This study investigated the activity of photosensitive phthalocyanines on promastigotes and amastigotes of Leishmania (L.) amazonensis. Aluminum phthalocyanine chloride (AlPcCl), Aluminum phthalocyanine hydroxide (AlPcOH) and zinc phthalocyanine (PcZn) were tested in the presence (matte red LED, potency of 2.5-2.3 μW for 30 min) and absence of light against L. amazonensis promastigotes and the parasite viability was evaluated after 24, 48 and 72 h. The amastigote forms were treated with AlPcCl and AlPcOH, following the same lighting protocols described for the promastigote forms, being evaluated after 24 h. Cytotoxicity to human erythrocytes and peritoneal macrophages was also evaluated. The results showed that AlPcCl and AlPcOH in the presence of light have antileishmania activity, with leishmanistatic effects on promastigotes and amastigotes of L. amazonensis, without causing cytotoxicity to peritoneal macrophages and erythrocytes. The concentrations that inhibited 50% of the promastigote forms after 24 h of light exposure were 0.21 ± 0.08 μM for AlPcCl and 0.23 ± 0.06 μM for AlPcOH. In 48 h and 72 h after the treatment, the IC 50 of AlPcCl was 0.13 ± 0.02 and 0.12 ± 0.03 μM and for AlPcOH was 0.14 ± 0.01 μM and 0.11 ± 0.01 μM, respectively. PcZn showed no activity on promastigotes of L. amazonensis. This study showed a substantial photodynamic activity of the phthalocyanines AlPcCl and AlPcOH against intracellular amastigotes forms of L. amazonensis after irradiation, presenting IC 50 values of 0.62 ± 0.06 μM and 0.92 ± 0.12 μM, respectively. These results support the possibility of using photodynamic therapy for the treatment of cutaneous leishmaniasis. Copyright © 2017 Elsevier B.V. All rights reserved.

New role of astrometry technique in sciences and technologies

NASA Astrophysics Data System (ADS)

Li, Zhengxin

2012-08-01

Abstract Ground astrometry optical techniques have played an important role in modern astronomical history, especially in the field of star catalog composing, Earth orientation parameters (EOP) determination and geodesy. The number of astrometric instruments attained a peak in the years of 1960 - 1975, while hundred instruments over the world were being operated routinely. Since space techniques had taken over the job in 1980’s, they were withdrawing rapidly, down to only a few for the moment. Since years it has been asked: what is the future for this technique? Actually, the question has already been answered by a statement of the IAU Commission 19 resolution in 1991: “modern astrometric observations provide a unique set of data sensitive to variations in the deflection of the vertical”. In response to the call of the resolution: “to investigate the possibility of deriving long - term variations in the deflection of the vertical within the reference frame provided by HIPPARCOS “we have been working ever since. One of the main difficulties that we are confronting is the lacking of data, since most of the instruments are no more working when the space technique was really able to provide all the information needed in a treatment in which all the factors, other than the variations in the deflection of the vertical (or Plumb Line Variations, PLV, as below) itself, may be removed completely in an observation. Fortunately, there are usable gravimetry data in China with which the PLV in certain regions of China is able t o be calculated, although they are not in the sense of directly observed, and thus able to be studied in practice. The PLVs in China, including their magnitude, characteristic, interpretation, as well as their special function in studying underground matte r changes, which are related to earthquakes, underground water storage et al., have been studied. A summary of these works is presented here, hoping that one will keep in mind that all the

Evaluation of the uncertainty in an EBT3 film dosimetry system utilizing net optical density

PubMed Central

Marroquin, Elsa Y. León; Herrera González, José A.; Camacho López, Miguel A.; Barajas, José E. Villarreal

2016-01-01

Radiochromic film has become an important tool to verify dose distributions for intensity‐modulated radiotherapy (IMRT) and quality assurance (QA) procedures. A new radiochromic film model, EBT3, has recently become available, whose composition and thickness of the sensitive layer are the same as those of previous EBT2 films. However, a matte polyester layer was added to EBT3 to prevent the formation of Newton's rings. Furthermore, the symmetrical design of EBT3 allows the user to eliminate side‐orientation dependence. This film and the flatbed scanner, Epson Perfection V750, form a dosimetry system whose intrinsic characteristics were studied in this work. In addition, uncertainties associated with these intrinsic characteristics and the total uncertainty of the dosimetry system were determined. The analysis of the response of the radiochromic film (net optical density) and the fitting of the experimental data to a potential function yielded an uncertainty of 2.6%, 4.3%, and 4.1% for the red, green, and blue channels, respectively. In this work, the dosimetry system presents an uncertainty in resolving the dose of 1.8% for doses greater than 0.8 Gy and less than 6 Gy for red channel. The films irradiated between 0 and 120 Gy show differences in the response when scanned in portrait or landscape mode; less uncertainty was found when using the portrait mode. The response of the film depended on the position on the bed of the scanner, contributing an uncertainty of 2% for the red, 3% for the green, and 4.5% for the blue when placing the film around the center of the bed of scanner. Furthermore, the uniformity and reproducibility radiochromic film and reproducibility of the response of the scanner contribute less than 1% to the overall uncertainty in dose. Finally, the total dose uncertainty was 3.2%, 4.9%, and 5.2% for red, green, and blue channels, respectively. The above uncertainty values were obtained by minimizing the contribution to the total dose

Time-resolved infrared reflectance studies of the dehydration-induced transformation of uranyl nitrate hexahydrate to the trihydrate form

DOE Office of Scientific and Technical Information (OSTI.GOV)

Johnson, Timothy J.; Sweet, Lucas E.; Meier, David E.

2015-09-08

Uranyl nitrate is a key species in the nuclear fuel cycle. However, this species is known to exist in different states of hydration, including the hexahydrate ([UO 2(NO 3) 2(H 2O) 6] often called UNH), the trihydrate [UO 2(NO 3) 2(H 2O) 3 or UNT], and in very dry environments the dihydrate form [UO 2(NO 3) 2(H 2O) 2]. Their relative stabilities depend on both water vapor pressure and temperature. In the 1950s and 1960s, the different phases were studied by infrared transmission spectroscopy but were limited both by instrumental resolution and by the ability to prepare the samples formore » transmission. We have revisited this problem using time-resolved reflectance spectroscopy, which requires no sample preparation and allows dynamic analysis while the sample is exposed to a flow of N 2 gas. Samples of known hydration state were prepared and confirmed via X-ray diffraction patterns of known species. In reflectance mode the hexahydrate UO 2(NO 3) 2(H 2O) 6 has a distinct uranyl asymmetric stretch band at 949.0 cm –1 that shifts to shorter wavelengths and broadens as the sample desiccates and recrystallizes to the trihydrate, first as a shoulder growing in on the blue edge but ultimately results in a doublet band with reflectance peaks at 966 and 957 cm –1. The data are consistent with transformation from UNH to UNT as UNT has two inequivalent UO 2 2+ sites. The dehydration of UO 2(NO 3) 2(H 2O) 6 to UO 2(NO 3) 2(H 2O) 3 is both a structural and morphological change that has the lustrous lime green UO 2(NO 3) 2(H 2O) 6 crystals changing to the matte greenish yellow of the trihydrate solid. As a result, the phase transformation and crystal structures were confirmed by density functional theory calculations and optical microscopy methods, both of which showed a transformation with two distinct sites for the uranyl cation in the trihydrate, with only one in the hexahydrate.« less

The mass dependence of chromospheric activity evolution & implications for gyrochronology

NASA Astrophysics Data System (ADS)

Curtis, Jason

2018-01-01

We know chromospheric emission decays over time, and yet this empirical relation is still fundamentally an interpolation over 3.5 Gyr from the Hyades to the Sun despite 45 years of progress. Furthermore, its very existence was called into question by Pace et al. (2004, 2009, 2013), who argued that activity plummets and flatlines around 1-2 Gyr. I will present new Ca II H & K data for NGC 752 (1.5 Gyr) and Ruprecht 147 (3 Gyr), and ISM-corrected data for M67 (4 Gyr, Curtis 2017), and pair this with the Sun's re-calibrated history (Egeland et al. 2017) and data on field stars from the Keck exoplanet program. I calculated ages for the field star sample using the [Y/Mg] "chemical clock," which was discovered from studies of solar twins and is due to galactic chemical enrichment. I find a mass dependence that matches the prediction from the activity-rotation-age relation of Mamajek & Hillenbrand (2008), where F stars rapidly plummet at 1-2 Gyr in line with the observations of F stars in clusters of similar age by Pace et al., whereas activity continuously declines for G and K dwarfs to approximately 5 and 7 Gyr, respectively. I will show that comparing ages estimated from [Y/Mg] to activity--rotation ages reveals known hot Jupiter hosts and other potentially anomalous stars. Combining the empirical relation between activity and Rossby number with estimates of stellar mass from spectroscopy and age from [Y/Mg] yields a gyrochronology relationship for FG and early K dwarfs that is independent of the cluster age scale and appears consistent with models from Mamajek & Hillenbrand (2008) and Barnes (2010). However, I have separately measured rotation periods for mid to late K dwarfs in 3 Gyr Ruprecht 147 with K2 and I find that they are rotating too rapidly relative to these empirical models and the semi-physical model of Matt et al. (2015). Apparently, K dwarfs spin down more slowly than the Skumanich square-root Law. Determining the K dwarf spin-down law is critical for

CATE 2016 Indonesia: Optics and Focus Strategy

NASA Astrophysics Data System (ADS)

McKay, M. A.; Jenson, L.; Kovac, S. A.; Bosh, R.; Mitchell, A. M.; Hare, H. S.; Watson, Z.; Penn, M. J.

2016-12-01

The 2017 solar eclipse will be a natural phenomenon that will sweep across the United State would provide an excellent opportunity to observe and study the solar corona. The Citizens Continental Astronomical Telescopic Eclipse (CATE) Experiment directed my Matt Penn, intends to take advantage of this scientific opportunity by organizing 60 sites along the path of totality from Oregon to South Carolina to observe the eclipse and make a 90 min continuous video of the solar corona. The preliminary observation was done with the 2016 eclipse in Indonesia, with 5 sites along the path of totality. The sites were provided with an 80mm diameter Telescope with a 480mm focal length with an extension tube, Celestron equatorial mount, a CMOS camera, a Dell dual processor running Windows, GPS and an Arduino box, more details will be provided. I observed at the furthest east site in Ternate, Indonesia, with Dr. Donald Walter. The day of the eclipse we had clouds but still had a successful observation. The observation was successful with 4 out of the 5 sites collected eclipse data, due to weather the other site was not able to observe. The data was then collected and processed over the summer. To prepare for the observation in 2017, the 60 sites will be provided with the equipment, software and training. The groups will then practice by doing solar and lunar observations, where they will follow an almost identical procedure for the eclipse to do their observations. These test will increase our chances to have a successful observation among all sites. The focus will play a crucial role in this observation to provide a high quality image. Currently, a new focusing method using an image derivative method to provide quantitative feedback to the user is being developed. Finally, a Graphical User Interface is also being developed using the codes produces from the summer 2016 data analysis, to process the images from each site with minimal effort and produce quality scientific images

The Relationship Between Tropical Cyclone Frequency and 'Climate Change'

NASA Astrophysics Data System (ADS)

Bolton, M.; Mogil, M.

2013-12-01

Please note: there have been minor updates to this work since the main author, Matt Bolton, graduated high school, but the majority of the research was compiled by him while he was a high school junior in 2011. Abstract: In recent years, there has been a growing trend by many, in the meteorological community (media and scientist) to predict expected seasonal tropical cyclone frequency in the Atlantic and Pacific Basins. Typically, the numbers are related to seasonal averages. However, these predictions often show a large positive bias (i.e., there are more years in which the expected number of storms exceeds or far exceeds average). Further, observed numbers often come close to bearing out the forecasts (actually a good thing). From a public perspective (and based on extrapolations performed by media and some scientific groups), this peaking of Atlantic tropical cyclone activity is observed globally. In an attempt to determine if such a global trend exists, we set out to collect data from weather agencies around the world and present it in a way that was as unbiased as possible. While there were inconsistencies across the various datasets, especially in regard to wind data, we were still able to construct a realistic global cyclone database. We have concluded that high activity levels in one basin are often balanced by areas of low activity in others. The Atlantic - Eastern Pacific couplet is one such example. This paper will serve as an update to our previous 2011 paper, which introduced our efforts. At that time, we found, on average, 70 named tropical cyclones worldwide. In both this and our original study, we did not address the issue of naming short-lived tropical systems, which was found to be inconsistent across worldwide ocean basins. Our results suggest, that from a global climate change perspective, a growing NUMBER of tropical cyclones is NOT being observed. In the current iteration of our study, we are examining, at least preliminarily, global

Recruitment and Patch Establishment by Seed in the Seagrass Posidonia oceanica: Importance and Conservation Implications.

PubMed

Balestri, Elena; Vallerini, Flavia; Lardicci, Claudio

2017-01-01

Seagrasses are declining globally, and deeper understanding is needed on the recruitment potential and distribution of new populations for many threatened species to support conservation planning in the face of climate change. Recruitment of Posidonia oceanica , a threatened seagrass endemic to the Mediterranean, has long been considered rare due to infrequent flowering, but mounting evidence demonstrates that the species is responding to a changing climate through greater reproductive effort. Due to the fragmentary information on recruit occurrence and distribution, little is known about reproductive success in the species and its contribution to persistence. We assembled P. oceanica recruitment data from published and unpublished sources, including our own, to examine the frequency and extent of recruitment events (establishment of seedlings in a site), seedling growth potential and habitat characteristics at recruitment sites. Results show that at least one recruitment event has occurred about every 3 years, and 18 localities were colonized at least one time since the first seedling record in 1986. Notably, consistently high seedling inputs were observed in four localities of the Western Mediterranean. Seedlings established mainly on unoccupied substrate areas along the coasts of islands, in sheltered sites and at shallower depths (<3 m) than the upper limit of adjacent P. oceanica meadows. Seedling establishment occurred more frequently on rocky than on sandy substrate, and rarely on dead "matte" or meadows of the seagrass Cymodocea nodosa . The chance of colonization success on rock was two times higher than on sand. Our 11 years of observations have allowed for the first time the documentation of the formation and development of patches by P. oceanica seed. These findings contradict the historical assumption that sexual recruitment is rare and usually unsuccessful for P. oceanica , and highlight the potential importance of recruitment for the long

Electronic distractions of the respiratory therapist and their impact on patient safety.

PubMed

Papadakos, Peter J

2014-08-01

Over the last decade, data from the lay press, government agencies, and the business world have identified ever-growing problems with electronic distraction and changes in human relationships in this electronically interconnected planet. As health professionals, we are well aware of the epidemic growth of injuries and deaths related to texting and driving. It should not surprise us that this distracted behavior has affected all levels of health-care providers and has impacted patient care. This advent of “distracted doctoring” was first coined by the Pulitzer Prize-winning correspondent Matt Richtel in a landmark article in the New York Times, “As doctors use more devices, potential for distraction grows.” This article was a flashpoint for professional organizations to reflect on this change in behavior and how it will impact patient safety and how we relate to patients. The explosion in technology (both personnel and hospital-based), coupled with a rapid social shift, creates an environment that constantly tempts health-care workers to surf the internet, check social media outlets, or respond to e-mails. Studies and commentaries in the medical literature only support how this is a growing problem in patient safety and may both increase medical errors and affects costs and the way we relate to patients and fellow staff. The Emergency Care Research Institute (ECRI) released its annual list of technology hazards for 2013, and three ring true for United States caregivers: distractions from smartphones and mobile devices, alarm hazards, and patient/data mismatches in electronic medical records and other health IT systems, all being in the top 10. How do we begin to address these new technological threats to our patients? First and foremost, we accept that this problem exists. We begin by educating our students and staff that this electronic explosion affects our behavior through addiction and the environment within our hospital through the use of electronic

Stellar Metamorphosis:

NASA Technical Reports Server (NTRS)

2002-01-01

edge-on, where the direct starlight is blocked by the dusty cocoon. Otherwise, the starlight would overwhelm the nebular light, making it very difficult to see the butterfly-shaped nebula. In a few hundred years, intense ultraviolet radiation from the central star will energize the surrounding gas, causing it to glow brightly, and a planetary nebula is born. These observations were made with the Wide Field and Planetary Camera 2 using three filters: yellow-green, blue, and near-infrared. The images were taken in 1997 by Sun Kwok and in 1996 by Matt Bobrowsky. Credits: Sun Kwok and Kate Su (University of Calgary), Bruce Hrivnak (Valparaiso University), and NASA ----------------- The Hubble Space Telescope Sees Remarkable Structure in the Heart of a Planetary Nebula [BOTTOM LEFT AND RIGHT] This Wide Field and Planetary Camera 2 image of NGC 6818 shows two distinct layers of gas (with dust): a spherical outer region and a brighter, vase-shaped interior 'bubble.' Astronomers believe that a fast wind - material propelled by radiation from the hot central star - is creating the inner elongated shape. The central star of the planetary nebula appears as a tiny blue dot. The material in the wind is traveling so fast that it smashes through older, slower-moving stellar debris, causing a 'blowout' at both ends of the bubble (lower right and upper left). This nebula looks like a twin of NGC 3918, another planetary nebula that has been observed by the Hubble telescope. The structure of NGC 3918 is remarkably similar to that of NGC 6818. It has an outer spherical envelope and an inner, brighter, elongated bubble. A fast-moving wind also appears to have created an orifice at one end (bottom right-hand corner) of the inner bubble. There are even faint wisps of material that were probably blown out of this hole. In the opposite direction (top left-hand corner), there is a protrusion that seems on the verge of breaking through to form a hole. By finding and studying such similar objects

State Performance-Based Regulation Using Multiyear Rate Plans for U.S. Electric Utilities

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lowry, Mark Newton; Makos, Matt; Deason, Jeff

Electric utilities today must contain costs at a time when many need to modernize aging systems and all face major changes in technologies, customer preferences and competitive pressures.Most U.S. electric utility facilities are investor-owned, subject to rate and service regulation by state public utility commissions. Regulatory systems under which these utilities operate affect their performance and ability to meet these challenges. In this business environment, multiyear rate plans have some advantages over traditional rate regulation.The report focuses on key design issues and provides case studies of the multiyear rate plan approach, applicable to both vertically integrated and restructured states. Markmore » Newton Lowry and Matt Makos of Pacific Energy Group Research and Jeff Deason of Berkeley Lab authored the report; Lisa Schwartz, Berkeley Lab, was project manager and technical editor.The report is aimed primarily at state utility regulators and stakeholders in the state regulatory process. The multiyear rate approach also provides ideas on how to streamline oversight of public power utilities and rural electric cooperatives for their governing boards.Two key provisions of multiyear rate plans strengthen cost containment incentives and streamline regulation: 1. Reducing frequency of rate cases, typically to every four or five years 2. Using an attrition relief mechanism to escalate rates or revenue between rate cases to address cost pressures such as inflation and growth in number of customers, independently of the utility’s own cost Better utility performance can be achieved under well-designed multiyear rate plans while achieving lower regulatory costs. Benefits can be shared between utilities and their customers. But plans can be complex and involve significant changes in the regulatory system. Designing plans that stimulate utility performance without undue risk and share benefits fairly can be challenging.This report discusses the rationale for

TU-A-210-02: HIFU: Why Should a Radiation Oncology Physicist Pay Attention?

DOE Office of Scientific and Technical Information (OSTI.GOV)

Schlesinger, D.

with HIFU is likely the first of several applications of the technology Learn about some similarities and differences between HIFU and ionizing radiation in terms of physics and biological effects. Learn about some of the technical challenges HIFU faces that might benefit from the experience of radiation oncology physicists including treatment planning improvements, quality assurance procedures, and treatment risk analysis. David Schlesinger receives research support from Elekta Instruments, AB. Matt Eames is an employee of the Focused Ultrasound Foundation which supports research and clinical trials. Dr. Eames conducts research which is supported by the Focused Ultrasound Foundation.« less

TU-A-210-00: HIFU Therapies - A Primer

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

2015-06-15

with HIFU is likely the first of several applications of the technology Learn about some similarities and differences between HIFU and ionizing radiation in terms of physics and biological effects. Learn about some of the technical challenges HIFU faces that might benefit from the experience of radiation oncology physicists including treatment planning improvements, quality assurance procedures, and treatment risk analysis. David Schlesinger receives research support from Elekta Instruments, AB. Matt Eames is an employee of the Focused Ultrasound Foundation which supports research and clinical trials. Dr. Eames conducts research which is supported by the Focused Ultrasound Foundation.« less

TU-A-210-01: HIFU Physics and Delivery

DOE Office of Scientific and Technical Information (OSTI.GOV)

Eames, M.

2015-06-15

with HIFU is likely the first of several applications of the technology Learn about some similarities and differences between HIFU and ionizing radiation in terms of physics and biological effects. Learn about some of the technical challenges HIFU faces that might benefit from the experience of radiation oncology physicists including treatment planning improvements, quality assurance procedures, and treatment risk analysis. David Schlesinger receives research support from Elekta Instruments, AB. Matt Eames is an employee of the Focused Ultrasound Foundation which supports research and clinical trials. Dr. Eames conducts research which is supported by the Focused Ultrasound Foundation.« less

Are you pondering what I'm pondering? Time and change in the West Antarctic Ice Sheet.

NASA Astrophysics Data System (ADS)

Hulbe, C. L.

2016-12-01

The motto for early 21st Century cryospheric science might be "that happend faster than I thought it would." The fact that change can come quickly to Earth's icy realms can be elucidated from the abstracts of all past Nye Lectures. From Bob Bindscahdler observing that "remarkably, nearly all time scales seem important", to Mark Serreze concluding that "the emerging surprise is the rapidity of change". Equally apparent in past lectures is the imbalance between answers and questions. Kurt Cuffy could not have been more clear about the "major unresolved issues lurking behind this facade of success, including poor understanding". Jeff Dozier was optimistic about merging satellite observations with field and modeling approaches but in many cases the quantitites we seek to measure are hidden from direct observation and the processes we seek to understand are embedded in complex systems. "This complexity may account for the lack of agreement concerning the processes" (Gary Clarke) and even worse, most of our observations are made in a "time of rapid change" (Mary Albert). "Nevertheless progress has been made" (Liz Morris). While "misunderstandings and blind alleys have ironically led to unexpected insight" (Doug MacAyeal), our community and science also benefit from the interest of an ever-expanding community of scholars who find the challenges "clear, exciting and compelling" (Richard Alley). We are active participants in "a climate change drama whose outcome is of concern to us all" (Matt Strum). This presentation will focus on the marine margins of the West Antarctic Ice Sheet (WAIS), places where where we know both a little and a lot, where change is observed at every time scale, and where change is not always driven externally. "We have never witnessed the collapse of a marine ice sheet," (Eric Rignot) and it matters to know as much as we can about the signs, symptoms, and processes of change. I will make the case that not everything of interest happens quickly and

Final report on the key comparison CCPR-K5: Spectral diffuse reflectance

NASA Astrophysics Data System (ADS)

Nadal, Maria; Eckerle, Kenneth L.; Early, Edward A.; Ohno, Yoshi

2013-01-01

The CCPR K5 key comparison on spectral diffuse reflectance was carried out in the framework of the CIPM Mutual Recognition Arrangement, by 13 national metrology institutes (MMIs) as participants. The participants were CSIR-NML (South Africa), HUT (Finland), IFA-CSIC (Spain), KRISS (Republic of Korea), MSL (New Zealand), NIM (China), NIST (United States of America), NMIJ (Japan), NPL (United Kingdom), NRC (Canada), OMH (Hungary), PTB (Germany) and VNIIOFI (Russia Federation). NIST (USA) piloted the comparison. The aim of this comparison was to check the agreement of measurement of the spectral diffuse reflectance among participants, using the measurement geometry of d/0 or 0/d in the wavelength range of 360 nm to 820 nm at 20 nm increment. The comparison was a star type comparison with the samples provided by the pilot laboratory and with the measurement sequence: Pilot-Participant-Pilot. Spectralon and matte white ceramic tiles were used as the transfer standards. Each participant received three of each type of sample and at least one sample of each type was measured three times on three separate days, and the other two samples were measured once. The report presents the description of the measurement facilities, procedures and uncertainties of all the participants as well as the results of the comparison. Measurement results from the participants and their associated uncertainties were analyzed in accordance with the Guidelines for CCPR Key Comparison Report Preparation, using weighted mean with cut-off. For the calculation of the Key Comparison Reference Value (KCRV), as agreed by the participants, the data of both samples were used for the 460 nm to 820 nm region and only the data of the Spectralon samples were used in the spectral region of 360 nm to 440 nm. The unilateral degrees of equivalence (DoE) calculated for each participant are mostly consistent within the uncertainty (k = 2) of the DoE. This international comparison of spectral diffuse reflectance

Upper ocean fine-scale features in synthetic aperture radar imagery. Part I: Simultaneous satellite and in-situ measurements

NASA Astrophysics Data System (ADS)

Soloviev, A.; Maingot, C.; Matt, S.; Fenton, J.; Lehner, S.; Brusch, S.; Perrie, W. A.; Zhang, B.

2011-12-01

-scale features on the sea surface observed in the SAR images and, in some cases, linking them to thermohaline features in the upper ocean. Finally, we have been able to reproduce SAR signatures of freshwater plumes and sharp frontal interfaces interacting with wind stress, as well as internal waves by combining hydrodynamic simulations with a radar imaging algorithm. The modeling results are presented in a companion paper (Matt et al., 2011).

Deep-time moles: art and archiving for an uncertain radiological future

NASA Astrophysics Data System (ADS)

Griffiths, Dave; Illingworth, Samuel; Girling, Matt

2017-04-01

This paper will present Deep Field [UnclearZine], a 2016 art-science project conducted at Mol and Dessel, two neighbouring rural villages co-existing with sites for planned geological nuclear-waste disposal in eastern Belgium. Dave Griffiths produced a microfiche publication that probes and narrates the scientific testing and politics of decision-making surrounding controversial ONDRAF-NIRAS (Belgian National Agency for Radioactive Waste and Enriched Fissile Materials) projects - at CatA, a tumulus for encasing low-level waste, and HADES, a lab investigating the feasibility and safety-case for deep-time geo-burial of high-level waste in clay strata. Griffiths' field work used qualitative and experiential methods such as ethnographic interviews with state scientists and independent monitoring groups, photographic derive, and sound recording, to sense a wider Anthropogenic narrative of energy production, mineral extraction and terrorist threat. Data were then remixed through narrative responses by scientist-poet Dr Sam Illingworth (Manchester Metropolitan University) and DIY-comix artist Matt Girling. Through experimenting with archaic analogue film technology, Griffiths collaged and miniaturised content to produce an edition of microfiches that have been distributed to zine libraries internationally. This subcultural format attempts to translate the past, present and future history of the repositories as folkloric sites of conflict, complexity and unknowing, for the benefit of a far-future readership. The paper will discuss the contemporary context of epistemological uncertainty around the survival and reception of crucial nuclear-security information in the face of inevitable material, linguistic and political ruination. We suggest that place-markers, as monumental semiotic warnings to the future, along with digital archives, might also be augmented by decentralised analogue fragments that promote ongoing memorialisation of nuclear-heritage sites through

Probing DNA in nanopores via tunneling: from sequencing to ``quantum'' analogies

NASA Astrophysics Data System (ADS)

di Ventra, Massimiliano

2012-02-01

, Biophys. J. 97, 1990, (2009).[0pt] [6] M. Zwolak, J. Lagerqvist, and M. Di Ventra, Ionic conductance quantization in nanopores, Phys. Rev.Lett. 103, 128102 (2009).[0pt] [7] M. Zwolak, J. Wilson, and M. Di Ventra, Dehydration and ionic conductance quantization in nanopores, J. Phys. Cond. Matt. 22 454126 (2011). [0pt] [8] M. Krems and M. Di Ventra, Ionic Coulomb blockade in nanopores arXiv:1103.2749.

Interpretation of high rate dust measurements with the Cassini dust detector CDA

NASA Astrophysics Data System (ADS)

Kempf, Sascha

2008-03-01

For two years the cosmic dust analyser (CDA) onboard the Cassini spacecraft has been exploring the dust environment of Saturn [Srama, R., Kempf, S., Moragas-Klostermeyer, G., Helfert, S., Ahrens, T. J., Altobelli, N., Auer, S., Beckmann, U., Bradley, J.G., Burton, M., Dikarev, V.V., Economou, T., Fechtig, H., Green, S.F., Grande, M., Havnes, O., Hillier, J.K., Horanyi, M., Igenbergs, E., Jessberger, E.K., Johnson, T.V., Krüger, H., Matt, G., McBride, N., Mocker, A., Lamy, P., Linkert, D., Linkert, G., Lura, F., McDonnell, J.A.M., Möhlmann, D., Morfill, G.E., Postberg, F., Roy, M., Schwehm, G.H., Spahn, F., Svestka, J., Tschernjawski, V., Tuzzolino, A.J., Wäsch, R., Grün, E., 2006. In situ dust measurements in the inner Saturnian system. Planet. Space Sci. 54, 967-987]. One major goal of the CDA instruments is to investigate Saturn's enigmatic E ring - the largest known planetary ring of the solar system. The sophisticated main detector (dust analyser - DA) of CDA is rather slow when processing the impact data, and limits the detectable number of impacts to 60min-1 [Srama, R., Ahrens, T., Altobelli, N., Auer, S., Bradley, J., Burton, M., Dikarev, V., Economou, T., Fechtig, H., Görlich, M., Grande, M., Graps, A., Grün, E., Havnes, O., Helfert, S., Horányi, M., Igenbergs, E., Jeßberger, E., Johnson, T., Kempf, S., Krivov, A., Krüger, H., Mocker-Ahlreep, A., Moragas-Klostermeyer, G., Lamy, P., Landgraf, M., Linkert, D., Linkert, G., Lura, F., McDonnel, J., Möhlmann, D., Morfill, G., Müller, M., Roy, M., Schäfer, G., Schlotzhauer, G., Schwehm, G., Spahn, F., Stübig, M., Svestka, J., Tschernjawski, V., Tuzzolino, A., Wäsch, R., Zook, H., 2004. The Cassini cosmic dust analyser. Space Sci. Rev. 114, 465-518]. However, measurements by the CDA high rate detector (HRD) imply that the DA impact rates in the inner core of the E ring exceed 1000min-1. Clearly, to investigate dust-rich environments with the DA requires knowledge about the instrument performance at

Distinct effects of water use efficiency increase on growth in Scots pine and sessile oak in the Mediterranean Basin

NASA Astrophysics Data System (ADS)

Martínez-Sancho, Elisabet; Dorado-Liñán, Isabel; Gutiérrez-Merino, Emilia; Matiu, Michael; Heinrich, Ingo; Helle, Gerhard; Menzel, Annette

2017-04-01

Drought is one of the main drivers of species distribution in the Mediterranean Basin, which will be exacerbated by climate change. The increase of atmospheric CO2 concentrations (Ca) has been related to enhanced tree growth and intrinsic water use efficiency (iWUE). However, in the Mediterranean Basin this 'fertilizing' effect should compensate the potential drought-induced growth reduction to maintain forest productivity at a comparable level. This is particularly relevant for temperate species reaching their southern distribution limits and/or the limits of their climatic niche in this region. We investigated tree growth and physiological responses of Scots pine (Pinus sylvestris L.) and sessile oak (Quercus petraea (Matt.) Liebl.) stands located at their southern distribution limits using annually resolved tree-ring width and δ13C chronologies for the period 1960-2012. The selected stands were sampled in Spain, France, Italy, Slovenia, Bulgaria, and Romania. Wood cores were extracted at each site and tree-ring width and δ13C were measured. Basal area increment (BAI) was calculated as a surrogate of secondary growth and 13C discrimination (Δ), leaf intercellular CO2 concentration (Ci) and iWUE were estimated from δ13C values. The temporal trends of BAI, Δ, Ci and iWUE, as well as in climatic variables (i.e. temperature, precipitation and potential evapotranspiration derived from CRU TS3.23 dataset) were calculated per site for the study period. Our specific objectives were (i) to test if rising atmospheric CO2 concentrations and changes in climate may have induced shifts in tree growth and ecophysiological proxies; (ii) to determine whether and how changes in iWUE are related to radial growth rates; and (iii) to assess site-specific physiological adjustments to increased atmospheric CO2 concentrations over the studied period. Preliminary results showed a generalized increase in Ci, and consequently in iWUE, at all study sites. Scots pine stands displayed a

The effects of adding different forms of nitrogen for 14 years on the vegetation composition at Whim Bog

NASA Astrophysics Data System (ADS)

van Dijk, Netty; Levy, Peter; Sheppard, Lucy; Leith, Ian; Leeson, Sarah; Jones, Matt; Dise, Nancy; Sutton, Mark

2017-04-01

The effects of adding different forms of nitrogen for 14 years on the vegetation composition at Whim Bog Netty van Dijk, Peter Levy, Lucy Sheppard, Ian Leith, Sarah Leeson, Matt Jones, Nancy Dise, Mark Sutton Centre for Ecology & Hydrology, Bush Estate, Penicuik, UK Reactive nitrogen (Nr) is a major plant nutrient which historically was in short supply in most semi-natural ecosystems. However, as a consequence of an increased use of N fertilisers and more intensive farming methods, atmospheric Nr -deposition and atmospheric ammonia (NH3) concentrations have increased dramatically during the last century. This has a significant effect on semi-natural systems, with some sensitive species disappearing altogether in the vicinity of elevated atmospheric N input. Whether one form of nitrogen has more effect on vegetation changes than the other is less well studied. To get more evidence for this, a field experiment at an ombrotrophic bog, Whim (Scottish Borders). This globally unique experiment was set up in 2002 where different forms and doses of N have been applied systematically. Nitrogen was applied as ammonia (NH3) gas to investigate effects of dry deposition and atmospheric concentrations along a gradient away from a free-air released fumigation line source. Wet deposition is added in the form of NH4Cl and NaNO3, respectively, using a rainwater collection and spraying system, at concentrations ranging from 8 to 56 kg N ha-1 yr-1. Both systems are automated and coupled to meteorological conditions. Within the first three years, the vegetation composition in the dry deposition system changed dramatically with an almost complete loss of Calluna vulgaris, Sphagnum capillifolium and Cladonia Portentosa close to the fumigation line. Further away from the fumigation line the changes were smaller and slower to materialise. In later years the changes in vegetation composition were slowing down. Now, after 14 years of ammonia application, we are analysing the data along the

An enhanced feature set for pattern recognition based contrast enhancement of contact-less captured latent fingerprints in digitized crime scene forensics

NASA Astrophysics Data System (ADS)

Hildebrandt, Mario; Kiltz, Stefan; Dittmann, Jana; Vielhauer, Claus

2014-02-01

In crime scene forensics latent fingerprints are found on various substrates. Nowadays primarily physical or chemical preprocessing techniques are applied for enhancing the visibility of the fingerprint trace. In order to avoid altering the trace it has been shown that contact-less sensors offer a non-destructive acquisition approach. Here, the exploitation of fingerprint or substrate properties and the utilization of signal processing techniques are an essential requirement to enhance the fingerprint visibility. However, especially the optimal sensory is often substrate-dependent. An enhanced generic pattern recognition based contrast enhancement approach for scans of a chromatic white light sensor is introduced in Hildebrandt et al.1 using statistical, structural and Benford's law2 features for blocks of 50 micron. This approach achieves very good results for latent fingerprints on cooperative, non-textured, smooth substrates. However, on textured and structured substrates the error rates are very high and the approach thus unsuitable for forensic use cases. We propose the extension of the feature set with semantic features derived from known Gabor filter based exemplar fingerprint enhancement techniques by suggesting an Epsilon-neighborhood of each block in order to achieve an improved accuracy (called fingerprint ridge orientation semantics). Furthermore, we use rotation invariant Hu moments as an extension of the structural features and two additional preprocessing methods (separate X- and Y Sobel operators). This results in a 408-dimensional feature space. In our experiments we investigate and report the recognition accuracy for eight substrates, each with ten latent fingerprints: white furniture surface, veneered plywood, brushed stainless steel, aluminum foil, "Golden-Oak" veneer, non-metallic matte car body finish, metallic car body finish and blued metal. In comparison to Hildebrandt et al.,1 our evaluation shows a significant reduction of the error rates

The effect of cyclical and severe heat stress on growth performance and metabolism in Afshari lambs.

PubMed

Mahjoubi, E; Yazdi, M Hossein; Aghaziarati, N; Noori, G R; Afsarian, O; Baumgard, L H

2015-04-01

The extent to which reduced feed intake contributes to decreased growth during heat stress (HS) in the ovine model is not clear. To evaluate the impact of decreased DMI on performance, we conducted an experiment on growing lambs experiencing a cyclical but extensive heat load. Sixteen intact male Afshari lambs (40.1 ± 1.9 kg) were used in a completely randomized design in 2 periods. In period 1, all 16 lambs were housed in thermal neutral (TN) conditions (22.2 ± 3.1°C and a temperature-humidity index [THI] of 67.9 ± 3.2) and fed at libitum for 8 d. In period 2 (P2), which lasted 9 d, 8 lambs were subjected to a cyclical HS condition (33.0 to 45.0°C and a THI of more than 80 at least for 24 h/d and more than 90 for 8 h/d). The other 8 lambs were maintained in TN conditions but pair-fed (pair-fed thermal neutral [PFTN]) to the HS lambs. During each period, DMI and water intake were measured daily. Respiration rate, rectal temperature, and skin temperature at the shoulder, rump, and front and rear leg were recorded at 0700 and 1400 h daily. Dry matte intake declined (17.5%; P < 0.01) in HS lambs and, by design, the temporal pattern and magnitude of reduced feed intake was similar in the PFTN controls. Water intake increased (19%; P < 0.05) during P2 in HS but not in the PFTN controls. Heat stress increased the 0700 and 1400 h skin temperature at the shoulder (5 and 9.2%), rump (6.2 and 10.3%), rear (6 and 9.2%), and front leg (6.5 and 9.8%) and respiratory rates (84 and 163% [P < 0.01]at 0700 and 1400 h, respectfully), but only the 1400 h rectal temperature was increased (P < 0.01; 0.65°C) in HS lambs. Neither environment nor period affected blood urea nitrogen and glucose concentrations. However, circulating NEFA and insulin were increased and declined (P < 0.01) in PFTN lambs, respectively, but neither variable was altered in the HS lambs. Growth was reduced in P2 for lambs in both treatments, but despite being on a similar reduced plane of nutrition, the HS

Readiness for Delivering Digital Health at Scale: Lessons From a Longitudinal Qualitative Evaluation of a National Digital Health Innovation Program in the United Kingdom.

PubMed

Lennon, Marilyn R; Bouamrane, Matt-Mouley; Devlin, Alison M; O'Connor, Siobhan; O'Donnell, Catherine; Chetty, Ula; Agbakoba, Ruth; Bikker, Annemieke; Grieve, Eleanor; Finch, Tracy; Watson, Nicholas; Wyke, Sally; Mair, Frances S

2017-02-16

, barriers to mainstreaming remain. Our findings suggest greater investment in national and local infrastructure, implementation of guidelines for the safe and transparent use and assessment of digital health, incentivization of interoperability, and investment in upskilling of professionals and the public would help support the normalization of digital health. These findings will enable researchers, health care practitioners, and policy makers to understand the current landscape and the actions required in order to prepare the market and accelerate uptake, and use of digital health and wellness services in context and at scale. ©Marilyn R Lennon, Matt-Mouley Bouamrane, Alison M Devlin, Siobhan O'Connor, Catherine O'Donnell, Ula Chetty, Ruth Agbakoba, Annemieke Bikker, Eleanor Grieve, Tracy Finch, Nicholas Watson, Sally Wyke, Frances S Mair. Originally published in the Journal of Medical Internet Research (http://www.jmir.org), 16.02.2017.

Developing Social Media-Based Suicide Prevention Messages in Partnership With Young People: Exploratory Study.

PubMed

Robinson, Jo; Bailey, Eleanor; Hetrick, Sarah; Paix, Steve; O'Donnell, Matt; Cox, Georgina; Ftanou, Maria; Skehan, Jaelea

2017-10-04

participants reported that the program made them feel suicidal. Participants in phase 2 generally rated the media messages as safe and acceptable, although some messages were rated more highly than others. This study suggests that young people can be safely engaged in developing suicide prevention messages, which can be disseminated via social media. Engaging young people in this process may improve the traction that such campaigns will have with other young people. The study also suggests that educating young people regarding how to talk safely about suicide online has multiple benefits and is not associated with distress. Overall, these findings pave the way for new approaches to prevent suicide among young people. ©Jo Robinson, Eleanor Bailey, Sarah Hetrick, Steve Paix, Matt O'Donnell, Georgina Cox, Maria Ftanou, Jaelea Skehan. Originally published in JMIR Mental Health (http://mental.jmir.org), 04.10.2017.

The Future of Theoretical Physics and Cosmology

NASA Astrophysics Data System (ADS)

Gibbons, G. W.; Shellard, E. P. S.; Rankin, S. J.

2009-08-01

Preface; List of contributors; 1. Introduction; Part I. Popular Symposium: 2. Our complex cosmos and its future Martin J. Rees; 3. Theories of everything and Hawking's wave function of the Universe James B. Hartle; 4. The problem of space-time singularities: implications for quantum gravity? Roger Penrose; 5. Warping spacetime Kip Thorne; 6. 60 years in a nutshell Stephen W. Hawking; Part II. Spacetime Singularities: 7. Cosmological perturbations and singularities George F. R. Ellis; 8. The quantum physics of chronology protection Matt Visser; 9. Energy dominance and the Hawking-Ellis vacuum conservation theorem Brandon Carter; 10. On the instability of extra space dimensions Roger Penrose; Part III. Black Holes: 11. Black hole uniqueness and the inner horizon stability problem Werner Israel; 12. Black holes in the real universe and their prospects as probes of relativistic gravity Martin J. Rees; 13. Primordial black holes Bernard Carr; 14. Black hole pair creation Simon F. Ross; 15. Black holes as accelerators Steven Giddings; Part IV. Hawking Radiation: 16. Black holes and string theory Malcolm Perry; 17. M theory and black hole quantum mechanics Joe Polchinski; 18. Playing with black strings Gary Horowitz; 19. Twenty years of debate with Stephen Leonard Susskind; Part V. Quantum Gravity: 20. Euclidean quantum gravity: the view from 2002 Gary Gibbons; 21. Zeta functions, anomalies and stable branes Ian Moss; 22. Some reflections on the status of conventional quantum theory when applied to quantum gravity Chris Isham; 23. Quantum geometry and its ramifications Abhay Ashtekar; 24. Topology change in quantum gravity Fay Dowker; Part VI. M Theory and Beyond: 25. The past and future of string theory Edward Witten; 26. String theory David Gross; 27. A brief description of string theory Michael Green; 28. The story of M Paul Townsend; 29. Gauged supergravity and holographic field theory Nick Warner; 30. 57 varieties in a NUTshell Chris Pope; Part VII. de Sitter Space

Emergent nanoscale fluctuations in high rock-salt PbTe

NASA Astrophysics Data System (ADS)

Billinge, Simon

2013-03-01

describe the results of these experiments. This work gives key insights into PbTe, the possible origin of its anomalous electronic structure properties, and why it is such an attractive parent compound for nanostructured high performance thermoelectric materials. I would like to acknowledge the excellent collaborations that occurred during this work, including Emil Bozin at Brookhaven National Laboratory, Mercouri Kanatzidis and Christos Malliakas at Northwestern University and Argonne National Laboratory, Kirsten Jensen from U. Aarhus, Steve Shapiro at Brookhaven National Laboratory, Matt Stone and Mark Lumsden at Oak Ridge National Laboratory, Nicola Spalding at ETH Zurich and Petros Souvatzis at Los Alamos National Laboratory. I would also like to acknowledge the support of the national user facilities and their staff where the work was done. Financial support for this work was from DOE office of Basic Energy Sciences through award DE-AC02-98CH10886.

The circular Uneged Uul structure (East Gobi Basin, Mongolia) - Geomorphic and structural evidence for meteorite impact into an unconsolidated coarse-clastic target?

NASA Astrophysics Data System (ADS)

Schmieder, Martin; Seyfried, Hartmut; Gerel, Ochir

2013-03-01

geomorphic and structural features resembling those at some eroded complex impact structures on Earth. Morphologically similar central peaks are observed at the Spider and Matt Wilson impact structures in Australia; the central annular ridge reminds of that at Gosses Bluff in Australia; the outer domal ridges might correspond to ring-like features as known from Tin Bider in Algeria. We, therefore, cautiously propose that an impact may have produced the Uneged Uul feature causing structural uplift (˜1000 m) of basement rocks at its center. So far, no convincing evidence for shock metamorphism could be proven by field work and petrographic analyses. However, it is likely that at the time of the deformation event the unconsolidated conglomerates were highly porous and possibly immersed in groundwater buffering the propagation of sudden stress-reducing deformation. Further studies will be in order to unravel the nature of the Uneged Uul structure, which should be considered a promising possible impact structure.

Large-Scale Uncertainty and Error Analysis for Time-dependent Fluid/Structure Interactions in Wind Turbine Applications

DOE Office of Scientific and Technical Information (OSTI.GOV)

Alonso, Juan J.; Iaccarino, Gianluca

2013-08-25

The following is the final report covering the entire period of this aforementioned grant, June 1, 2011 - May 31, 2013 for the portion of the effort corresponding to Stanford University (SU). SU has partnered with Sandia National Laboratories (PI: Mike S. Eldred) and Purdue University (PI: Dongbin Xiu) to complete this research project and this final report includes those contributions made by the members of the team at Stanford. Dr. Eldred is continuing his contributions to this project under a no-cost extension and his contributions to the overall effort will be detailed at a later time (once his effortmore » has concluded) on a separate project submitted by Sandia National Laboratories. At Stanford, the team is made up of Profs. Alonso, Iaccarino, and Duraisamy, post-doctoral researcher Vinod Lakshminarayan, and graduate student Santiago Padron. At Sandia National Laboratories, the team includes Michael Eldred, Matt Barone, John Jakeman, and Stefan Domino, and at Purdue University, we have Prof. Dongbin Xiu as our main collaborator. The overall objective of this project was to develop a novel, comprehensive methodology for uncertainty quantification by combining stochastic expansions (nonintrusive polynomial chaos and stochastic collocation), the adjoint approach, and fusion with experimental data to account for aleatory and epistemic uncertainties from random variable, random field, and model form sources. The expected outcomes of this activity were detailed in the proposal and are repeated here to set the stage for the results that we have generated during the time period of execution of this project: 1. The rigorous determination of an error budget comprising numerical errors in physical space and statistical errors in stochastic space and its use for optimal allocation of resources; 2. A considerable increase in efficiency when performing uncertainty quantification with a large number of uncertain variables in complex non-linear multi-physics problems; 3

Does canopy mean N concentration explain differences in light use efficiency in 14 eddy-covariance sites?

NASA Astrophysics Data System (ADS)

Peltoniemi, Mikko; Pulkkinen, Minna; Kolari, Pasi; Mäkelä, Annikki

2010-05-01

. Mean growing season VPD was the only climatic variable which correlated significantly with the largest actual LUE; none of them correlated with potential LUE. Inclusion of nitrogen in the Prelued-model structure did not improve the goodness of fit of the model. According to our results LUE correlates with mean canopy N concentration. The correlation of mean VPD with the largest actual LUE can also be explained with the model accounting for daily variation in climate, as was made with Prelued-model for the potential LUE. Further studies utilising seasonal values of canopy N are called upon. *Acknowledgements: Eero Nikinmaa, Pertti Hari, Timo Vesala, Tuomas Laurila, Fredrik Lagergren, Meelis Mölder, Anders Lindroth, Thomas Grünwald, Christian Bernhofer, Denis Loustau, Paul Berbigier, Beverly Law, Alison Dunn, Steve Wofsy, Torbjörn Johansson, Torben Christensen, Terry Callaghan, Hans Verbeeck, Remko Duursma, Leonardo Montagnani, Dario Papale, Andreas Ibrom, Ebba Dellwik, Kim Pilegaard, Kentaro Takagi, Eva van Gorsel, Heather Keith, Sonia Wharton, Matthias Falk, Kya Tha Paw U, Matt Schroeder, Jon Lloyd

NASA's Newest Orbital Debris Ground-based Telescope Assets: MCAT and UKIRT

NASA Astrophysics Data System (ADS)

Lederer, S.; Frith, J.; Pace, L. F.; Cowardin, H. M.; Hickson, P.; Glesne, T.; Maeda, R.; Buckalew, B.; Nishimoto, D.; Douglas, D.; Stansbery, E. G.

2014-09-01

these ground-based telescope assets will yield spectral coverage ranging from 0.3 25 microns, allowing orbital debris to be studied in depth across a wider wavelength range in the visible and IR than ever previously studied by ODPO. Located on opposite sides of the world and in opposite hemispheres, they offer access to nearly the entire GEO belt on any given night, allowing immediate coverage of nearly any time-critical break-up event. By expanding the methods for surveying, detecting, and characterizing orbital debris, we can better model the debris environment and ultimately gain insight into how to mitigate potential collisions for future missions. Acknowledgments: Special thanks to Matt Bold, Rick Kendrick, the UKIRT staff, the Joint Astronomy Centre, Lockheed Martin, and the University of Arizona, for their collaborative efforts toward modifying UKIRT to boldly venture inward in space to track tiny man-made objects orbiting the Earth.

Quantum Field Theory in Curved Spacetime

NASA Astrophysics Data System (ADS)

Reynolds, Sally C.; Gallagher, Andrew

2012-03-01

; 19. Assimilation and modern human origins in the African peripheries Fred H. Smith, Vance T. Hutchinson and Ivor Janković; 20. Patterns of Middle Pleistocene hominin evolution in Africa and the emergence of modern humans Emma Mbua and Günter Bräuer; 21. Integration of the genetic, anatomical, and archaeological data for the African origin of modern humans: problems and prospects Osbjorn M. Pearson; Part IV. In Search of Context: Hominin Environments, Behaviour and Lithic Cultures: 22. Animal palaeocommunity variability and habitat preference of robust australopiths in South Africa Darryl J. de Ruiter, Matt Sponheimer and Julia Lee-Thorp; 23. Impacts of environmental change and community ecology on the composition and diversity of the southern African monkey fauna from the Plio-Pleistocene to the present Sarah Elton; 24. African genesis revisited: reflections on Raymond Dart and the 'Predatory Transition from Ape(-Man) to Man' Travis R. Pickering; 25. Shared intention in early artefacts: an exploration of deep structure and implications for communication and language John A. J. Gowlett; 26. Sibudu Cave: recent archaeological work on the Middle Stone Age Lyn Wadley; 27. The oldest burials and their significance Avraham Ronen; Index.

The neodymium stable isotope composition of the silicate Earth and chondrites

NASA Astrophysics Data System (ADS)

McCoy-West, Alex J.; Millet, Marc-Alban; Burton, Kevin W.

2017-12-01

The non-chondritic neodymium (Nd) 142Nd/144Nd ratio of the silicate Earth potentially provides a key constraint on the accretion and early evolution of the Earth. Yet, it is debated whether this offset is due to the Earth being formed from material enriched in s-process Nd isotopes or results from an early differentiation process such as the segregation of a late sulfide matte during core formation, collisional erosion or a some combination of these processes. Neodymium stable isotopes are potentially sensitive to early sulfide segregation into Earth's core, a process that cannot be resolved using their radiogenic counterparts. This study presents the first comprehensive Nd stable isotope data for chondritic meteorites and terrestrial rocks. Stable Nd measurements were made using a double spike technique coupled with thermal ionisation mass spectrometry. All three of the major classes of chondritic meteorites, carbonaceous, enstatite and ordinary chondrites have broadly similar isotopic compositions allowing calculation of a chondritic mean of δ146/144Nd = -0.025 ± 0.025‰ (±2 s.d.; n = 39). Enstatite chondrites yield the most uniform stable isotope composition (Δ146/144Nd = 26 ppm), with considerably more variability observed within ordinary (Δ146/144Nd = 72 ppm) and carbonaceous meteorites (Δ146/144Nd = 143 ppm). Terrestrial weathering, nucleosynthetic variations and parent body thermal metamorphism appear to have little measurable effect on δ146/144Nd in chondrites. The small variations observed between ordinary chondrite groups most likely reflect inherited compositional differences between parent bodies, with the larger variations observed in carbonaceous chondrites being linked to varying modal proportions of calcium-aluminium rich inclusions. The terrestrial samples analysed here include rocks ranging from basaltic to rhyolitic in composition, MORB glasses and residual mantle lithologies. All of these terrestrial rocks possess a broadly similar Nd

NASA Snaps Picture of Eastern U.S. in a Record-Breaking "Freezer"

NASA Image and Video Library

2015-02-20

NASA's Terra satellite captured an image of the snow-covered eastern U.S. that looks like the states have been sitting in a freezer. In addition to the snow cover, Arctic and Siberian air masses have settled in over the Eastern U.S. triggering many record low temperatures in many states. On Feb. 19 at 16:40 UTC (11:40 a.m. EST), the Moderate Resolution Imaging Spectroradiometer (MODIS) instrument that flies aboard NASA's Terra satellite captured a picture of the snowy landscape. The snow cover combined with the frosty air mass made the eastern U.S. feel like the inside of freezer. The MODIS image was created at NASA's Goddard Space Flight Center in Greenbelt, Maryland. On the morning of Feb. 20, NOAA's Weather Prediction Center (WPC) noted, "There were widespread subzero overnight lows Thursday night (Feb. 19) extending from Illinois to western Virginia, and numerous record lows were set. Bitterly-cold arctic air is setting numerous temperature records across the eastern U.S. and will keep temperatures well below normal on Friday (Feb. 20)." In Baltimore, Maryland, a low temperature of 1F broke the record low for coldest morning recorded at the Thurgood Marshall Baltimore Washington-International Airport. In Louisville, Kentucky, temperatures dropped to -6F, breaking the old record low of 0F, according to meteorologist Brian Goode of WAVE-TV. Meanwhile, Richmond Kentucky bottomed out at a frigid -32F. In North Carolina, a record low temperature was set at Charlotte where the overnight temperature bottomed out at 7F breaking the old record of 13F in 1896. In Asheville, temperatures dropped to just 4F breaking the old record of 10F in 1979. Temperature records for Asheville extend back to 1876. Several records were also broken in Georgia, according to Matt Daniel, a meteorologist at WMAZ-TV, Macon Georgia, who cited data from the National Weather Service. Daniel said that Macon set a new record low when the temperature dropped to 18F, beating the previous record of

Paleomagnetism and the evolution of Pangea

NASA Astrophysics Data System (ADS)

Morel, P.; Irving, E.

1981-03-01

), it provides a satisfactory framework for the early evolution of the Gulf of Mexico, and it provides an explanation of the absence of geological evidence for a Tethys ocean in the Paleozoic. The transition between B and A cannot be accurately reconstructed from the paleomagnetic data, because the resolution of the record is as yet inadequate, but it presumably occurred by a 3500-km minimum dextral megashear between Laurasia and Gondwana during the late Permian and Triassic (approximately 250-200 m.y.), without the formation of ocean between them, and was accompanied by lesser motions between North America and Europe. The sense of megashear is the same as that invoked by Arthaud and Matte (1977) on geological grounds, but the magnitude and timing are different. Our interpretation favors the idea that continental drift is a continuous process, not confined to Jurassic and later times, but extending backwards into the Triassic and Permian. We suggest that Pangea was not an immobile configuration as envisaged by Wegener and most subsequent workers but that it evolved more or less continuously.

Trajectories of Depressive Symptoms Among Web-Based Health Risk Assessment Participants.

PubMed

Bedrosian, Richard; Hawrilenko, Matt; Cole-Lewis, Heather

2017-03-31

" class tended to be younger than the "remitting" class (P<.001). Lower baseline sleep quality (P<.001), quality of life (P<.001), stress level (P<.001), and current treatment involvement (P<.001) were all predictive of membership in the "severe" class. The trajectories identified were consistent with trends in previous research. The results identified some key predictors: we discuss those that mirror prior studies and offer some hypotheses as to why others did not. The finding that 1 in 5 HRA participants with subthreshold symptoms deteriorated to the point of clinical distress during succeeding years underscores the need to learn more about such individuals. We offer additional recommendations for follow-up research, which should be designed to reflect changes in health plan demographics and HRA delivery platforms. In addition to utilizing additional variables such as cognitive style to refine predictive models, future research could also begin to test the impact of more aggressive outreach strategies aimed at participants who are likely to deteriorate or remain significantly depressed over time. ©Richard Bedrosian, Matt Hawrilenko, Heather Cole-Lewis. Originally published in the Journal of Medical Internet Research (http://www.jmir.org), 31.03.2017.

PREFACE: 4th Workshop on Theory, Modelling and Computational Methods for Semiconductors (TMCSIV)

NASA Astrophysics Data System (ADS)

Tomić, Stanko; Probert, Matt; Migliorato, Max; Pal, Joydeep

2014-06-01

renowned theoretical groups from many European countries (Spain, France, Ireland, Germany, Switzerland, Luxemburg, Norway, Italy, Poland, Denmark, Sweden, Serbia, etc.), as well as Asia (Iran, Japan) and USA. We would like to thank all participants for making this a very successful meeting and for their contribution to the conference programme and these proceedings. We would also like to acknowledge the financial support from the Institute of Physics (Semiconductor Physics Group and Computational Physics Group), EPSRC-UK, the CECAM UK-Hartree Node, CCP9, and Quantum Wise (distributors of Atomistix). The Editors Acknowledgments Conference Organising Committee: Stanko Tomić (Chair, University of Salford) Matt Probert (University of York) Max Migliorato (University of Manchester) Joydeep Pal (University of Manchester) Programme Committee: David Whittaker (University of Sheffield, UK) John Robertson (University of Cambridge, UK) Risto Nieminen (Helsinki University of Technology Finland) Eoin O'Reilly (Tyndall Institute Cork Republic of Ireland) Marco Califano (University of Leeds, UK) Stewart Clark (University of Durham, UK) Stanko Tomić (University of Salford, UK) Mauro Pereira (Sheffield Hallam University, UK) Aldo Di Carlo (University of Rome ''Tor Vergata,'' Italy) Lev Kantorovich (King's College London, UK) Mervin Roy (University of Leicester, UK) Ben Hourahine (University of Strathclyde, UK) Rita Magri (University of Modena and Reggio Emilia, Italy) Zoran Ikonic (University of Leeds) John Barker (University of Glasgow) The proceedings were edited and compiled by Joydeep Pal, Max Migliorato and Stanko Tomić.

Human impact, geomorphological and bio-environmental indicators for mapping and monitoring of a Mediterranean urban-beach with Posidonia oceanica (Gulf of Cagliari-Sardinia)

NASA Astrophysics Data System (ADS)

De Muro, Sandro; Pusceddu, Nicola; Frongia, Paolo; Buosi, Carla; Passarella, Marinella; Ibba, Angelo

2016-04-01

This work describes the human conditioned evolution (medium term) and the short term dynamics (mainly sediment transport) in southern Sardinia beach (between Giorgino and Cala d'Orri, about 11km), composed of fine to coarse quartz sand, backed by dune ridges and lagoons. The study was founded by NEPTUNE Project, Tender6 (L n. 7/2007). Geomorphological and bio-environmental indicators as: urbanization and coastal defence expansion, dune and beach changes, biotic indices (benthic foraminifera and Posidonia meadow) have been used. Medium-term evolution, over a period of 60 years, was carried out by ortho-images (1954-2015) for reconstructing coastline changes at this temporal scale. The main modifications were the building of the canal harbor, the consequent loss of 2.5km of beach, and the construction of several coastal defense structures, which caused asymmetric accumulations (lee zones) and erosion areas. Short-term variations have been periodically monitored (2014-2015) during 5 different field surveys (DGPS and Echo-sounder data) obtaining topo-bathymetric digital models. Sedimentary and hydrodynamic characteristics have been studied. Wave propagation, coastal currents and sediment transport, have been simulated through numerical models within Delft3D software. The results obtained allowed to visualize the response of the beach to wave stress, forced from SW, S, SE (Cagliari buoy and weather data). The comparison between data collected, thematic maps and models allowed to identify the main controlling factors and distribution mechanisms of the sedimentary paths on the shoreface. Those human modifications (e.g. building of the canal harbour and jetties, lagoon mouths stabilization, the consequent modified hydrodynamics and bottom trawling) have direct influence on the Posidonia oceanica and on its upper limit. In 2002, the Italian Environment Office reported a wide area (between -4m and -20m) of degraded Posidonia and dead matte in front of the study beach

JOINTS AND SYN-SEDIMENTARY FAULTS NETWORKS IN MARINE CLAYS AND MUDSTONES. Importance for Radwaste storage

NASA Astrophysics Data System (ADS)

Arnould, M.

2009-12-01

There is a number of marine clays, mudstones, marls, 100 to 200 m thick, showing smectites, mixed layers illite/smectite, with a small percentage of organic matter and sulphides with a variable clay, silt, and carbonate content. I published (Arnould , 2006) examples from Lower Cambrian to Miocene in age and from the Baltic shore to Spain in Europe. Observations were made mostly in quarries and pits down to more than 40 m and in underground research laboratories (URL). Only visible on fresh cuts amongst a variety of fissures there is always a network of joints. Schematically one family is the bedding (horizontal) the two others are normal to the bedding and orthogonal between them. The orientations of vertical joints are different from the orientations of pits and quarries’s walls. The networks are intrinsic. It was first well described by Skempton & al (1969) in Eocene London Clay. Joints are matt in texture, clean, without filling or cement. The order of magnitude of their linear dimensions is decimeter to meter. It is necessary to start from the original sediment: mud. Deposited in flakes mud has a bee’s nest microscopic structure. Each nest is full of water. Hence mud may have a water content up to 300%, reported to its dry weight. Paradoxically mud is impervious. As proposed by Cosgrove (2001) progressive but discontinuous hydraulic fracturing could be the origin of vertical joints, with drainage upwards and compaction of the sediment. Geological observations show that ioints are formed during the sedimentation process. There is also a world literature concluding at the necessary early fracturing of mudstones and marls hosts of sand dykes. Very few faults are identified in field observations and on exploration logs. But it is obvious that drainage and compaction of mud over thousands square kilometers induced differential settlements with many syn-sedimentary non tectonic faults constituting another discontinuity network. These faults inside the same

Anthropogenic versus natural processes and pollution in Padana Valley in last years involving new communication/policy strategies and ethical issues in research evaluation

NASA Astrophysics Data System (ADS)

Quattrocchi, Fedora; Vaccaro, Carmela; Boschi, Enzo

2014-05-01

reconstruction of the true facts. Moreover these areas are affected by natural enrichment in heavy metals and toxic elements harmful to the health: geochemical surveying may allow both to recognize issues of diffuse "natural pollution" and to identify markers and tracers able to discriminate among anthropogenic and natural anomalies by geochemical methods mostly. The discovery of pollution emergency poses the problem of how to share to the public scientific data, avoiding that communication produces alarmism or persecution for the involved researchers, as occurred in the past. When diffuse pollution is linked to natural causes which can be defined as transient that precede potential gas-burst disasters, the risk communication by researchers not always meets sufficient support from those who are responsible for the administration of the territory, being afraid to lose the political consensus. Conflicts of interest in promoting certain non urgent research should be highlighted readily and clearly. This is one of the main cause of low resources devoted to the study of transient geochemical contamination in shallow aquifers, which could be useful for seismotectonic research too. A discussion about: i) intellectual property & equal opportunity for all Earth Science researchers to have access to the public research calls (MIUR, MATT MSE Ministries); ii) about the critical research on some short-term hazards, which penalized the researchers in terms of scientific productivity and career was opened by the paper, suggesting new research evaluation indicators -ethical ones- than Impact Factor only.

Lattice preferred orientation development in lower mantle minerals: Implications for seismic anisotropy

NASA Astrophysics Data System (ADS)

Miyagi, L. M.

2011-12-01

produce deformation textures consistent with (001) slip. If (001) slip in pPv is used to model deformation and anisotropy development in the D" region, shear wave splitting characterized by fast horizontally polarized shear waves (VSH) and an anti-correlation of P and S waves in the flow direction is produced, consistent with seismic observations (Miyagi et al. 2010b). Modeling texture development for Mw in the D" also produces a similar pattern of anisotropy and when combined with pPv further enforces this seismic signature (Wenk et al. 2011). Wenk, H.-R., et al. (2006), J. Phy. Cond. Matt. 18(25), S933-S947. Miyagi, L. (2010a) Ph.D. Thesis, UC Berkeley. Merkel, S., et al. (2002) JGR, 107(B11), 2271. Long, M., et al. (2006) PEPI, 156, 75-88. Karato, S., et al. (1995) Science, 270(5235), 458-461. Wenk, H.-R., et al. (2006) EPSL 245(1-2) 302-314. Okada, T., et al. (2010) PEPI 180: 195-202. Miyagi, L., et al (2011) Phys. Chem. Min. in press. Miyagi, L., et al. (2010b) Science, 329, 1639-1641. Hirose, K., et al. (2010) GRL, 37, L20302. Wenk, H-R., et al. (2011) EPSL 306: 33-45.

The Air-Sea Interface and Surface Stress under Tropical Cyclones

NASA Astrophysics Data System (ADS)

Soloviev, Alexander; Lukas, Roger; Donelan, Mark; Ginis, Isaac

2013-04-01

of the drag coefficient wind speed dependence around 65 m/s. This minimum may contribute to the rapid intensification of storms to major tropical cyclones. The subsequent slow increase of the drag coefficient with wind above 65 m/s serves as an obstacle for further intensification of tropical cyclones. Such dependence may explain the observed bi-modal distribution of tropical cyclone intensity. Implementation of the new parameterization into operational models is expected to improve predictions of tropical cyclone intensity and the associated wave field. References: Donelan, M. A., B. K. Haus, N. Reul, W. Plant, M. Stiassnie, H. Graber, O. Brown, and E. Saltzman, 2004: On the limiting aerodynamic roughness of the ocean in very strong winds, Farrell, B.F, and P.J. Ioannou, 2008: The stochastic parametric mechanism for growth of wind-driven surface water waves. Journal of Physical Oceanography 38, 862-879. Kelly, R.E., 1965: The stability of an unsteady Kelvin-Helmholtz flow. J. Fluid Mech. 22, 547-560. Koga, M., 1981: Direct production of droplets from breaking wind-waves-Its observation by a multi-colored overlapping exposure technique, Tellus 33, 552-563. Miles, J.W., 1959: On the generation of surface waves by shear flows, part 3. J. Fluid. Mech. 6, 583-598. Soloviev, A.V. and R. Lukas, 2010: Effects of bubbles and sea spray on air-sea exchanges in hurricane conditions. Boundary-Layer Meteorology 136, 365-376. Soloviev, A., A. Fujimura, and S. Matt, 2012: Air-sea interface in hurricane conditions. J. Geophys. Res. 117, C00J34.

Exploring Our Low-Mass Neighbors

NASA Astrophysics Data System (ADS)

Kohler, Susanna

2017-10-01

The Karl G. Jansky Very Large Array, located in Socorro, NM. [John Fowler]Taking advantage of a program offered by the National Radio Astronomy Observatory (NRAO), an undergraduate class has observed local dwarf galaxies to learn about their properties.The Benefits of Nearby DwarfsIf you want to learn about the physical properties of low-mass galactic halos, the best place to look is nearby dwarf galaxies. These objects have the benefit of being close enough that we can resolve individual stars, allowing us to explore the relationship between star formation and the surrounding interstellar medium. They also allow us to directly measure bulk velocities, so we can interpret the distributions of both dark and baryonic matt5ter in these galaxies.HI images of UGC 11411. Left: HI mass surface density. Right: the intensity-weighted velocity field of the HI gas, which reveals the bulk kinematics of the galaxy. [Bralts-Kelly et al. 2017]Though thousands of local-volume, gas-rich objects have been explored by gas surveys in the past, many have slipped through the cracks due to the varied selection criteria of these different surveys. In a new study, neutral atomic hydrogen observations are presented for the first time for two of these star-forming, gas-rich dwarf galaxies.A Class in ActionGuided by Professor John Cannon and collaborators at other universities, a class of undergraduates at Macalester College in St. Paul, Minnesota, has coauthored a study of the neutral interstellar medium of these two local dwarf galaxies. The project was made possible by the Observing for University Classes program offered by NRAOs Karl G. Jansky Very Large Array (VLA), in which university classes in observational astronomy can apply for observing time with the VLA.Top: a view of UGC 11411s stars from Hubble. Middle: the locations of the galaxys star formation, as traced by SAOs telescopes observations of H. Bottom: UGC 11411s neutral interstellar medium distribution (red contour), overlaid

[Early aseptic loosening of the CF 30 femoral stem].

PubMed

Kovanda, M; Havlícek, V; Hudec, J

2007-02-01

, the Poldi stem survival curve showed better results. Matt surface finish of the stem. However, the link between the CF 30 stem and cement was so strong that, in all 16 revised hips, the stem was removed together with nearly a complete cement mantle. The authors therefore dismiss this as a cause. Also, in the remaining cases of CF 30 aseptic loosening, which had not been revised, radiographic evidence suggested loosening between bone and cement. The authors did not find any movement of the CF stem in its cement mantle. The stem always fitted in with the cement mantle. Erroneous surgical technique or cementing was unlikely. The procedures were performed by experienced orthopedic surgeons who used the second-generation cementing technique. In patients with a Poldi stem, the first-generation cementing method was used and the proportion of aseptic loosening at 6 years of follow-up was only 4 %. In contrast, loosening in patients with the CF 30 stem was 20 % at 6 years and 6 months postoperatively. Shape of the CF 30 stem with the intention to find a relationship between stem shape and its early aseptic loosening, the authors started cooperation with the Institute of Solid Mechanics, Mechatronics and Biomechanics at the Faculty of Mechanical Engineering, Brno University of Technology. Using the method of finite elements, they carried out the stressstrain analysis in a model system. Stress at the cement-bone interface in the CF 30 stem was higher than in the Poldi stem, and this difference was statistically significant. The authors believe that the more frequent loosening found in patients with the CF 30 stem can be accounted for by its shape. The survival curve for the CF 30 femoral stem did not show good results, and therefore this stem is not recommended for implantation. The authors suggest that a more frequent early aseptic loosening of CF 30 stems may have been caused by its unsuitable shape.

Analytical phase diagrams for colloids and non-adsorbing polymer.

PubMed

Fleer, Gerard J; Tuinier, Remco

2008-11-04

We review the free-volume theory (FVT) of Lekkerkerker et al. [Europhys. Lett. 20 (1992) 559] for the phase behavior of colloids in the presence of non-adsorbing polymer and we extend this theory in several aspects: (i) We take the solvent into account as a separate component and show that the natural thermodynamic parameter for the polymer properties is the insertion work Pi(v), where Pi is the osmotic pressure of the (external) polymer solution and v the volume of a colloid particle. (ii) Curvature effects are included along the lines of Aarts et al. [J. Phys.: Condens. Matt. 14 (2002) 7551] but we find accurate simple power laws which simplify the mathematical procedure considerably. (iii) We find analytical forms for the first, second, and third derivatives of the grand potential, needed for the calculation of the colloid chemical potential, the pressure, gas-liquid critical points and the critical endpoint (cep), where the (stable) critical line ends and then coincides with the triple point. This cep determines the boundary condition for a stable liquid. We first apply these modifications to the so-called colloid limit, where the size ratio q(R)=R/a between the radius of gyration R of the polymer and the particle radius a is small. In this limit the binodal polymer concentrations are below overlap: the depletion thickness delta is nearly equal to R, and Pi can be approximated by the ideal (van't Hoff) law Pi=Pi(0)=phi/N, where phi is the polymer volume fraction and N the number of segments per chain. The results are close to those of the original Lekkerkerker theory. However, our analysis enables very simple analytical expressions for the polymer and colloid concentrations in the critical and triple points and along the binodals as a function of q(R). Also the position of the cep is found analytically. In order to make the model applicable to higher size ratio's q(R) (including the so-called protein limit where q(R)>1) further extensions are needed. We

Modeling hydrodynamics, water temperature, and water quality in the Klamath River upstream of Keno Dam, Oregon, 2006-09

USGS Publications Warehouse

Sullivan, Annett B.; Rounds, Stewart A.; Deas, Michael L.; Asbill, Jessica R.; Wellman, Roy E.; Stewart, Marc A.; Johnston, Matthew W.; Sogutlugil, I. Ertugrul

2011-01-01

. * Water temperatures ranged from near freezing in winter to near 30 degrees C at some locations and periods in summer; seasonal water temperature patterns were similar at the inflow and outflow. Although vertical temperature stratification was not present at most times and locations, weak stratification could persist for periods up to 1-2 weeks, especially in the downstream parts of the reach. Thermal stratification was important in controlling vertical variations in water quality. * The specific conductance, and thus density, of tributaries within the reach usually was higher than that of the river itself, so that inflows tended to sink below the river surface. This was especially notable for inflows from the Klamath Straits Drain, which tended to sink to the bottom of the Klamath River at its confluence and not mix vertically for several miles downstream. * The model was able to capture most of the seasonal changes in the algal population by modeling that population with three algal groups: blue-green algae, diatoms, and other algae. The blooms of blue-green algae, consisting mostly of Aphanizomenon flos aquae that entered from Upper Klamath Lake, were dominant, dwarfing the populations of the other two algae groups in summer. A large part of the blue-green algae population that entered this reach from upstream tended to settle out, die, and decompose, especially in the upper part of the Link-Keno reach. Diatoms reached a maximum in spring and other algae in midsummer. * Organic matter, occurring in both dissolved and particulate forms, was critical to the water quality of this reach of the Klamath River, and was strongly tied to nutrient and dissolved-oxygen dynamics. Dissolved and particulate organic matter were subdivided into labile (quickly decaying) and refractory (slowing decaying) groups for modeling purposes. The particulate matter in summer, consisting largely of dead blue-green algae, decayed quickly. Consequently, this particulate matt

A mid-infrared laser absorption sensor for carbon monoxide and temperature measurements

NASA Astrophysics Data System (ADS)

Vanderover, Jeremy

array of measurements in combustion, energy, and industrial gas sensing applications. It has unsurpassed sensitivity due to the use of the fundamental CO band at 4.6 mum and provides kHz acquisition bandwidths necessary for high-speed measurements in these systems. This research was directed by Professor Matt Oehlschlaeger and supported by the Office of Naval Research (ONR).

DOE Office of Scientific and Technical Information (OSTI.GOV)

Elbridge Gerry Puckett

All of the work conducted under the auspices of DE-FC02-01ER25473 was characterized by exceptionally close collaboration with researchers at the Lawrence Berkeley National Laboratory (LBNL). This included having one of my graduate students - Sarah Williams - spend the summer working with Dr. Ann Almgren a staff scientist in the Center for Computational Sciences and Engineering (CCSE) which is a part of the National Energy Research Supercomputer Center (NERSC) at LBNL. As a result of this visit Sarah decided to work on a problem suggested by Dr. John Bell the head of CCSE for her PhD thesis, which she finishedmore » in June 2007. Writing a PhD thesis while working at one of the University of California (UC) managed DOE laboratories is a long established tradition at the University of California and I have always encouraged my students to consider doing this. For example, in 2000 one of my graduate students - Matthew Williams - finished his PhD thesis while working with Dr. Douglas Kothe at the Los Alamos National Laboratory (LANL). Matt is now a staff scientist in the Diagnostic Applications Group in the Applied Physics Division at LANL. Another one of my graduate students - Christopher Algieri - who was partially supported with funds from DE-FC02-01ER25473 wrote am MS Thesis that analyzed and extended work published by Dr. Phil Colella and his colleagues in 1998. Dr. Colella is the head of the Applied Numerical Algorithms Group (ANAG) in the National Energy Research Supercomputer Center at LBNL and is the lead PI for the APDEC ISIC which was comprised of several National Laboratory research groups and at least five University PI's at five different universities. Chris Algieri is now employed as a staff member in Dr. Bill Collins' research group at LBNL developing computational models for climate change research. Bill Collins was recently hired at LBNL to start and be the Head of the Climate Science Department in the Earth Sciences Division at LBNL. Prior to this

Final Report on Portable Laser Coating Removal Systems Field Demonstrations and Testing

NASA Technical Reports Server (NTRS)

Rothgeb, Matthew J.; McLaughlin, Russell L.

2008-01-01

were very positive. Corrosion was effectively removed from steel, but less successfully from aluminum alloys. Coatings were able to be removed, with varying results, generally dark, matte and thin coatings were easier to remove. Steel and aluminum panels were able to be cleaned for welding, with no known deleterious effects and weld-lines were able to have coatings removed in critical areas for NDE while saving time as compared to other methods.

Clearing the Cosmic Fog - The Most Distant Galaxy Ever Measured

NASA Astrophysics Data System (ADS)

2010-10-01

A European team of astronomers using ESO's Very Large Telescope (VLT) has measured the distance to the most remote galaxy so far. By carefully analysing the very faint glow of the galaxy they have found that they are seeing it when the Universe was only about 600 million years old (a redshift of 8.6). These are the first confirmed observations of a galaxy whose light is clearing the opaque hydrogen fog that filled the cosmos at this early time. The results were presented at an online press conference with the scientists on 19 October 2010, and will appear in the 21 October issue of the journal Nature. "Using the ESO Very Large Telescope we have confirmed that a galaxy spotted earlier using Hubble is the most remote object identified so far in the Universe" [1], says Matt Lehnert (Observatoire de Paris) who is lead author of the paper reporting the results. "The power of the VLT and its SINFONI spectrograph allows us to actually measure the distance to this very faint galaxy and we find that we are seeing it when the Universe was less than 600 million years old." Studying these first galaxies is extremely difficult. By the time that their initially brilliant light gets to Earth they appear very faint and small. Furthermore, this dim light falls mostly in the infrared part of the spectrum because its wavelength has been stretched by the expansion of the Universe - an effect known as redshift. To make matters worse, at this early time, less than a billion years after the Big Bang, the Universe was not fully transparent and much of it was filled with a hydrogen fog that absorbed the fierce ultraviolet light from young galaxies. The period when the fog was still being cleared by this ultraviolet light is known as the era of reionisation [2]. Despite these challenges the new Wide Field Camera 3 on the NASA/ESA Hubble Space Telescope discovered several robust candidate objects in 2009 [3] that were thought to be galaxies shining in the era of reionisation. Confirming the

Numerical Investigation of Crossflow Instability on the HIFiRE-5

NASA Astrophysics Data System (ADS)

Lakebrink, Matthew T.

each technique. Crossflow-wave computations were compared to measurements made by Dr. Matt Borg in the Boeing AFOSR Mach 6 Quiet Tunnel (BAM6QT). Linear analysis for wave angle, phase speed, peak frequency, and spanwise wavelength agreed well with the experiment for sufficiently low Reynolds numbers. The Reynolds number at which linear theory deviated from the test data was termed the 'linear limit'. A stationary-crossflow N-factor of 8.2 correlated well with the linear limit, as did a traveling-wave amplitude of about 1%. Experimental PSD data was used to identify the onset of turbulence at the downstream end of the model, and the associated stationary-crossflow N-factor based on LST was 9.4. Correlating to the linear limit provides a way to conservatively estimate crossflow-induced transition using LST. Evolution of the crossflow waves between the linear limit and the breakdown to turbulence was studied using Non-linear PSE (NPSE). By exciting a combination of stationary and traveling waves, naturally excited harmonics grew downstream of the linear limit to amplitudes of about 2% based on peak temperature. The wave angles of these harmonics agreed well with the test data. For reasons unknown, such agreement was not realized for phase speed. Initial-amplitude sweeps were performed for both stationary and traveling waves. Initial stationary-wave amplitude had a strong influence on the peak-harmonic amplitude and location of transition onset, while initial amplitude of the traveling-waves primarily influenced the location of transition onset. This is the first dataset from which detailed comparisons have been made between stability analysis and quiet tunnel data for crossflow waves in both the linear and non-linear stages of evolution. Several of these comparisons serve as validation of LASTRAC for crossflow-wave analysis. Finally, to aid the comparison of stability analysis to experimental data in general, the sensitivities of crossflow-wave evolution to small

A 400 year reconstruction of July relative air humidity for the region Vienna (eastern Austria) based on carbon and oxygen stable isotope ratios in tree-ring latewood cellulose of oaks

NASA Astrophysics Data System (ADS)

Haupt, M.; Boettger, T.; Weigl, M.; Grabner, M.

2009-04-01

Stable isotope chronologies and correlation to climate. We present the stable isotope chronologies of carbon (^13Clw) and oxygen (^18Olw) for the period from 1600 to 2003 respectively of non-exchangeable hydrogen (^2Hlw) for the last century constructed base upon tree-ring latewood cellulose from oaks (Quercus petraea Matt. Liebl.) grown in the region Vienna (Austria). The stable isotope ratios correspond mainly to the summer climate conditions. For the calibration period (1900-2003) we found high significant correlations (p < 0.001) between ^13Clw and relative air humidity (RH) of July (-0.66), between ^18Olw and RHV I-V II (-0.61) and between ^2Hlw and RHV I-V III(-0.56). In the case of temperatures high significant correlations between the growing season temperature and ^13Clw (0.55), between the annual mean temperatures and ^18Olw ratios (0.45) and between summer mean temperatures (June to August) and ^2Hlw values (0.49) were estimated. Modeling. Various univariate and multivariate linear regressions models were proved for the reconstruction of summer relative air humidity and temperature. We found that establishing of robust models had several uncertainties: - using common linear transfer functions which oversimplify the complexity of relations; - using of pooled material and neglecting of different reactions from individual trees to climate; - high-order autocorrelations in the isotope time series; - climatic trends in the investigated region which are different in the first and in the second half of 20th century; - temporal instability of climate signals in the isotope ratios of tree ring cellulose. In the case of temperature no valid model could be estimated caused by temporal instabilities of signal strength. For relative air humidity two bivariate models RHV II = (-4.3 ± 0.7) * ^13Clw + (-2.8 ± 0.5) * ^18Olw + 44 [1] and RHV II = (-4.7 ± 0.7) * ^13Clw + (-0.35 ± 0.07) * ^2Hlw - 68 [2] were found as verifiable and applicable to reconstruct RHV II

HWHAP_Ep2_Your 2017 Astrounaut Class

NASA Image and Video Library

2017-07-14

again. >> No. >> Can you do stair cases [cross-talk]? Host: That's probably the best thing I can do. >> There's no undo button. Zena Cardman: Circles are still tricky though. Host: Okay Raja let's move on to you. Raja Chari: All right so I used to slice deli meat for a living. I met Neil Armstrong when I was like 5 and my flight lead stopped me from flying into North Korea. >> Deli meat. >> Neil Armstrong. >> Deli meat. >> Deli meat. >> Deli meat. Raja Chari: Neil Armstrong. >> Only because I asked yesterday if anyone had met [inaudible]. Host: Okay, how fast can you slice a deli meat? Raja Chari: Pretty fast, my wife and I actually worked at High V for a while and we sliced deli meat in the deli section. She actually lost the tip of her finger on the deli slicer, so yeah but reattached, so. Host: All right, very cool and definitely we need to know the story behind almost flying into North Korea. Raja Chari: So there's a restricted area and there's obviously a lot of airfields in that area and so I was a young wing man and we were doing practice target attacks. And we were split from each other and I was doing a talk on, we call it to an airfield and you know, I was getting really close. Like man I can make out things on the runway and all of a sudden my flight lead realizes that is not a South Korean airfield that I'm describing, that is a North Korean airfield and calls me south before anything worse happened. Yeah, I was -- you know, I'm happy like to go into the scenario describing everything I saw on the ground, which was actually really something over there on the ground. Host: Well, now you have an amazing amount of flight experience, so somethings you're going to learn from, awesome. Okay, so Matt you're up. Matt Dominick: All right, my three things here, I have climbed 10, 14ers in Colorado. I rode on the crew team in college and I won a gift wrapping competition during the holiday season at the Container Store. Host: I really hope the Container thing is true

PREFACE: Ocean and climate changes in polar and sub-polar environments: proceedings from the 2010 IODP-Canada/ECORD summer school

NASA Astrophysics Data System (ADS)

St-Onge, Guillaume; Veiga-Pires, Cristina; Solignac, Sandrine

2011-05-01

/GEOTOP, Canada) Mathieu Duchesne (Geological Survey of Canada-Québec, Canada) Frédérique Eynaud (EPOC/Universite Bordeaux I, France) Pierre Francus (INRS-ETE/GEOTOP, Canada) Martin Frank (IFM-GEOMAR, Germany) Yves Gélinas (Concordia/GEOTOP, Canada) Joël Guiot (CEREGE, France) Claude Hillaire-Marcel (UQAM/GEOTOP, Canada) Patrick Lajeunesse (University Laval, Canada) Jean-François Lemieux (Courant Institute of Mathematical Sciences, New York University, USA) Guillaume Massé (LOCEAN/Institut Pierre-Simon Laplace, France) Matt O'Regan (Cardiff University, UK) Joseph Ortiz (Kent State University, USA) Frank Rack (University Nebraska-Lincoln, USA/ANDRILL Science Management Office) Taoufik Radi (UQAM/GEOTOP, Canada) André Rochon (ISMER-UQAR/GEOTOP, Canada) Ruediger Stein (Alfred Wegener Institute, Germany) Guillaume St-Onge (ISMER-UQAR/GEOTOP, Canada) Bjorn Sundby (ISMER-UQAR, Canada) GEOTOP logoUQAM UQAR logoINRS logo Universite de Quebec logoGeological Survey of Canada logo

Solid State Ionic Materials - Proceedings of the 4th Asian Conference on Solid State Ionics

NASA Astrophysics Data System (ADS)

Chowdari, B. V. R.; Yahaya, M.; Talib, I. A.; Salleh, M. M.

1994-07-01

* The Sputtered La0.5Sr0.5MnO3-Yttria Stabilized Zirconia Composite Electrode in Solid Oxide Fuel Cells * A Solid Electrochemical Ferro Sensor for Molten Matte * SnO2-based Sensor for H2S Monitoring-Electrical Conductivity Measurements and Device Testing * Humidity Sensor using Potassium Tungsten Bronze Synthesized from Peroxo-Polytungstic Acid * Study on Li/LiClO4/V6O13 Test Cells * Fabrication and Characterisation of Some Solid Electrolyte Cells Containing CuI and Silver Oxysalts * Solid State Battery of Proton Conducting Sodium Thiosulphate Pentahydrate * Low Temperature Synthesis of LiMn2O4 for Secondary Lithium Batteries * Effect of Different Cathode Active Materials on Battery Performance with Silver Molybdate Electrolyte Partially Substituted with Zinc Oxide * Fabrication and Characterization of Electrochemical Cells based on Silver Molybdoarsenate and Silver Tungstoarsenate Glass Electrolytes * Lorentz Force Dependence of Dissipation in a Granular Superconductor * Late Entry (Invited paper) * Simultaneous Voltammetry and Spectroscopy of Polyaniline in Propylene Carbonate * Author Index * Tentative List of Participants

Obituary: Clifford G. Toner (1959-2009)

NASA Astrophysics Data System (ADS)

Hill, Frank

2011-12-01

in Hawai'i, K.D. Leka, recalls that "Cliff was the embodiment of a "gentle giant"; so tall, yet so soft-spoken and patient, and I just recall a sense of his always being ready to help any living thing. Cliff was out with a back injury in March 1991, and it was under his temporarily-abandoned desk that Betsy, the IfA cat had her one (and only) litter (when my cat Audrey, whom many of you know, was born). As the littermates grew, Cliff, Matt Penn and I had kittens crawling over us; I can still hear his chuckles, "well helloooh, who are you there now?" as they would scramble up his chair to his desk. It was always with a smile that he'd greet me when we ran into each other after the "Hawai'i days"; we'd swap some stories, kid updates but only recently we were more in touch as I'm now playing with GONG data. I was heartened to hear he was working on the magnetogram merging, because I knew it'd be done really well with his attention." Cliff Toner was a caring and loving person, an excellent scientist, and a hero of GONG. He will be sorely missed by everyone who knew him. He is survived by his wife, Nelsey, children, Ariel, Nathaniel, Miranda, and Kayla, sister Gloria, brothers Ethan (Heather) and Emanuel (Lisa).

hwhap_Ep20_ Special Delivery

NASA Image and Video Library

2017-11-22

Gary Jordan: Houston, We Have a Podcast. Welcome to the official podcast of the NASA Johnson Space Center, episode 20, Special Delivery. I'm Gary Jordan, and I'll be your cohost today, along with Matt Buffington, director of public affairs at NASA's Ames Research Center in California, and the host of NASA in Silicon Valley Podcast. Matt, what's up? Matthew Buffington: Hey Gary, we're doing great, so glad we could team up on this. This is also concurrently episode 69 for the NASA in Silicon Valley Podcast. There's a ton of overlap between our listeners, so I'm really glad we were able to make this happen. Gary Jordan: Yeah, me too. Today is a very special episode, because we're teaming up with NASA in Silicon Valley Podcast to talk about some of the things we can find in a cargo vehicle when it's shipped to space, which is perfect because SpaceX will be sending its Dragon Cargo Vehicle to the International Space Station here soon. So, who do we have from Ames, Matt? Matthew Buffington: Over here we're bringing in Dennis Leveson-Gower. He's a project scientist here over at Ames, and has tons of experience working on cargo, working on payloads, and sending them on up to the space station. How about over there in Houston? Gary Jordan: We'll have Shane Kimbrough. He's a NASA astronaut who recently spent about six months on the space station and landed earlier this year. We've actually had him on the podcast to talk about his landing experience back in episode three. But while he was up there, he had quite a few cargo vehicles visit the station. He had the SpaceX Dragon, Orbital ATK Cygnus, Japanese HTV, and the Russian Progress all within his six-month stay aboard the station. So, it's fair to say he knows what cargo on station is all about. He performed hundreds of experiments with the science that was delivered on some of those vehicles, and even got some fresh food, so I'm excited to ask him about that experience. Matthew Buffington: Awesome. I'm really excited to

PREFACE: International Conference on Strongly Correlated Electron Systems (SCES 2011)

NASA Astrophysics Data System (ADS)

Littlewood, P. B.; Lonzarich, G. G.; Saxena, S. S.; Sutherland, M. L.; Sebastian, S. E.; Artacho, E.; Grosche, F. M.; Hadzibabic, Z.

2012-11-01

, Kyushu G. R. Stewart, Gainesville C. Di Castro, Rome R. Osborn, Chicago H. Takagi, Tokyo M. Eremets, Mainz S. Ovchnikov, Krasnoyarsk L. Taillefer, Sherbrooke M. Fiebig, Bonn C. Panagopoulos, Singapore & Heraklion J. D. Thompson, Los Alamos Z. FiskIrvine S. Paschen, Vienna Y. Tokura, Tokyo J. Flouquet, Grenoble C. Pfleiderer, Munich K. Ueda, Tokyo P. Fulde, Dresden P. Phillips, Urbana C. M. Varma, Riverside A. Geim, Manchester D. Pines, Davis T. Vojta, Rolla J.C. Gomez-Sal, Santander T. V. Ramakrishnan, Bangalore N.L. Wang, Beijing A. Kavokin, Southampton A.K. Raychaudhuri, Calcutta T. Xiang, Beijing J. Goodenough, Austin M. Reifers, Kosice L. Yu, Beijing H. Hosono, Tokyo P. Riseborough, Philadelphia F. C. Zhang, Hong Kong S. Julian, Toronto M. L Saboungi, Orleans G. Zwicknagl, Braunschweig Operational Team Anson Cheung (co-ordinator)Hyeong Jin KimPaul Nahai-Williamson Beng Tan (co-ordinator)Jack GillettPeter Logg Cheng Liu (co-ordinator)Jo WensleyPrajakti Kalra Swee K. Goh (co-ordinator)Jonathan SilverRichard Brierley Adam HalskiLara SibleyRobert Hay Edd CavannaLeona HopeSeb Haines Felix NissenLina KlintbergSitikantha Das Gareth ConduitMarianne BauerStephen Rowley Gerie LonzarichMatt BurgessSven Friedemann Greg LeverMuhammad Ahsan ZebYang Zou Hannah PriceNick BristoweYiqian Xu Haruka TaniguchiOleksandr PoplavskyyZhuo Feng

Prospectus 1999

NASA Astrophysics Data System (ADS)

Holmes, Jon L.; Gettys, Nancy S.

1999-01-01

assignments, and activities using JCE Software publications submitted by users. All JCE Software users are invited to contribute to this area. Get in touch with JCE Software and let us know how you are using our materials so that we can share your ideas with others! Although the word software is in our name, many of our publications are not traditional software. We also publish video on videotape, videodisc, and CD-ROM and electronic documents (Mathcad and Mathematica, spreadsheet files and macros, HTML documents, and PowerPoint presentations). Most chemistry instructors who use a computer in their teaching have created or considered creating one or more of these for their classes. If you have an original computer presentation, electronic document, animation, video, or any other item that is not printed text it is probably an appropriate submission for JCE Software. By publishing your work in any branch of the Journal of Chemical Education, you will share your efforts with chemistry instructors and students all over the world and get professional recognition for your achievements. Literature Cited 1. Schatz, P. F.; Moore, J. W.; Holmes, J. L. Illustrated Periodic Table; J. Chem. Educ. Software 1995, 2D2. 2. Kotz. J. C.; Young, S. Chemistry Navigator; J. Chem. Educ. Software 1995, 6C2. 3. Banks, A. Periodic Table Videodisc, 2nd ed.; J. Chem. Educ. Software 1996, SP1. 4. QuickTime 3.0, Apple Computer, Inc.: 1 Infinite Loop, Cupertino, CA 95014-2084. 5. Jacobsen, J. J.; Moore, J. W. Chemistry Comes Alive!, Volume 1; J. Chem. Educ. Software 1997, SP 18. 6. Jacobsen, J. J.; Moore, J. W. Chemistry Comes Alive!, Volume 2; Chem. Educ. Software 1998, SP 21. 7. Moore, J. W.; Jacobsen, J. J.; Hunsberger, L. R.; Gammon, S. D.; Jetzer, K. H.; Zimmerman, J. ChemDemos Videodisc; J. Chem. Educ. Software 1994, SP 8. 8. Moore, J. W.; Jacobsen, J. J.; Jetzer, K. H.; Gilbert, G.; Mattes, F.; Phillips, D.; Lisensky, G.; Zweerink, G. ChemDemos II; J. Chem. Educ. Software 1996, SP 14. 9. Jacobsen

AAS 228: Day 2 afternoon

NASA Astrophysics Data System (ADS)

Kohler, Susanna

2016-06-01

expansion as it reached the red giant branch. Finally, Paula Szkody explained the exotic light curves of cataclysmic variables found with K2. These detailed observations allow us to understand previously unseen bumps and wiggles in the light curves due to the complex physics driving these systems.The Limits of Scientific Cosmology: Historical and Cosmological Context (by Gourav Koullar)Karl Popper was everywhere today, being invoked by both Matt Stanley and Sean Carroll.The second session of this forum constituted a series of talks aimed at setting the premise for our current understanding of the universe, and the very story of how cosmology came to be a science. Matt Stanley gave us an extraordinary tour of the last 150 years of scientific tendencies to create models of the universe. John Tyndall, James Clark Maxwell, Ernst Mach all joined the party, as we moved towards the Friedman-Lemaitre-Robertson-Walker model and Einsteins tweaks to his field equations in General Relativity. Stanley gave due credit to the Steady State Cosmology movement, since it was using Popperian falsifiability that Hermann Bondi and Fred Hoyle established the rules of how a theory of the universe should look like. Even today, as we wage an internal battle between Adaptive Optimism and Pessimistic Induction as scientists, our willingness understand the cosmos stays strong.Virginia Trimble: old skool ( slightly off the wall) #aas228 pic.twitter.com/W31PtbC0in chrislintott (@chrislintott) June 14, 2016Richard Dawid followed this up with a new philosophical theory of science, putting an emphasis on non-empirical confirmation of theories, and tracking evolution of credence (e.g. in a Bayesian manner) instead of definitive true or false answers to fundamental questions. Virginia Trimble brought the afternoon discussion to a conclusion by discussing a very unique empirical observation: whenever a community has come at a juncture where the choice has been between one or many, finite or infinite (in a non

PERSPECTIVE: Waorani at the head of the table: towards inclusive conservation in Yasuní

NASA Astrophysics Data System (ADS)

McSweeney, Kendra; Pearson, Zoe

2009-09-01

Kendra McSweeney Zoe Pearson In 'Ecuador's Yasuní Biosphere Reserve: a brief modern history and conservation challenges', Matt Finer and colleagues draw from a wide literature to describe the overlapping jurisdictions, confusing designations, and conflicting imperatives that are the Yasuní Biosphere Reserve. Yasuní's complexity is emblematic of 21st-century conservation landscapes world-wide: products of long isolation at the global periphery, they are erstwhile biological and cultural refuges transformed into contested and violent resource frontiers (Peluso and Watts 2001). At stake in how those contests play out in Yasuní is its spectacular biodiversity, and the ability of its indigenous residents (including Waorani and others living in voluntary isolation) to enjoy their rights as enshrined in the UN Declaration on the Rights of Indigenous Peoples (United Nations 2007). The authors review several promising recent initiatives for strengthening both conservation and indigenous rights in Yasuní. These include legislative efforts to curtail oil and road development, innovative carbon-marketing schemes, territorial mapping, constitutional amendments, enhanced military presence, and the promotion of sustainable development projects. Each of these measures is vital and important. But Yasuní's history alerts us to the instability of such measures. Government administrations change, and with them the political commitment to particular programs. Further, carbon markets are economically untested and vulnerable to international price volatility (Ma'anit 2008), militarization of natural areas is a double-edged sword (Sawyer 2003), and tourism-based development projects rely on the goodwill of fickle first-world consumers. Furthermore, such measures as these are largely exogenous. While they may work on behalf of and with Yasuní's indigenous residents, they do not begin with them—that is, Waorani are typically consulted mid-stream (at best) within the project

First Image and Spectrum of a Dark Matter Object

NASA Astrophysics Data System (ADS)

2001-12-01

Telescope is a project of international co-operation between ESA and NASA. [2]: The MACHO collaboration is made up of: Kem H. Cook , Andrew J. Drake , Stefan C. Keller , Stuart L. Marshall , Cailin A. Nelson and Piotr Popowski (Lawrence Livermore National Laboratory, Livermore, CA, USA); Charles Alcock and Matt J. Lehner (University of Pennsylvania, Philadelphia, PA, USA); Robyn A. Allsman (Australian National Supercomputing Facility, Canberra, ACT, Australia); David R. Alves (STScI, Baltimore, USA); Tim S. Axelrod , Ken C. Freeman and Bruce A. Peterson (Mount Stromlo Observatory, Weston, ACT, Australia); Andrew C. Becker (Bell Labs, Murray Hill, NJ, USA); Dave P. Bennett (University of Notre Dame, IN, USA); Marla Geha (University of California at Santa Cruz, CA, USA); Kim Griest and Thor Vandehei (University of California, San Diego, CA, USA); Dante Minniti (P. Universidad Catolica, Santiago de Chile); Mark R. Pratt , Christopher W. Stubbs and Austin B. Tomaney (University of Washington, Seatlle, WA, USA); Peter J. Quinn (European Southern Observatory, Garching, Germany); Will Sutherland (University of Oxford, UK) and Doug Welch (McMaster University, Hamilton, Ontario, Canada).

Surfing a Black Hole

NASA Astrophysics Data System (ADS)

2002-10-01

and how these supermassive black holes formed and why almost every massive galaxy appears to contain one. The formation of central black holes and that of their host galaxies themselves increasingly appear to be just one problem and the same. Indeed, one of the outstanding challenges for the VLT to solve in the next few years. There is also little doubt that coming interferometric observations with instruments at the VLT Interferometer (VLTI) and the Large Binocular Telescope (LBT) will also result in another giant leap within this exciting field of research. Andreas Eckart is optimistic: "Perhaps it will even be possible with X-ray and radio observations in the next few years to directly demonstrate the existence of the event horizon." More information The information presented in this Press Release is based on a research article ("Seeing a Star Orbit around the Supermassive Black Hole at the centre of the Milky Way" by Rainer Schödel et al.) that appears in the research journal "Nature" on October 17, 2002. Notes [1]: This press release is issued in coordination between ESO and the Max-Planck-Institute for Extraterrestrial Physics (MPE) in Garching, Germany. A German version is available at http://www.mpg.de/pri02/pri0287.htm. [2]: The team consists of Rainer Schödel, Thomas Ott, Reinhard Genzel, Reiner Hofmann and Matt Lehnert (Max-Planck-Institut für extraterrestrische Physik, Garching, Germany), Andreas Eckart and Nelly Mouawad (Physikalisches Institut, Universität zu Köln, Cologne, Germany), Tal Alexander (The Weizmann Institute of Science, Rehovot, Israel), Mark J. Reid (Harvard-Smithsonian Center for Astrophysics, Cambridge, Mass., USA), Rainer Lenzen and Markus Hartung (Max-Planck-Institut für Astronomie, Heidelberg, Germany), François Lacombe, Daniel Rouan, Eric Gendron and Gérard Rousset (Observatoire de Paris - Section de Meudon, France), Anne-Marie Lagrange (Laboratoire d'Astrophysique, Observatoire de Grenoble, France), Wolfgang Brandner, Nancy

hwhap_Ep16_Spacesuits

NASA Image and Video Library

2017-10-26

CASE ANYONE HASN’T SEEN IT-- >> SPOILER ALERT. >> WHICH, IF YOU HAVEN’T SEEN IT, WHAT’S WRONG WITH YOU? YOU NEED TO SEE IT. BUT THEY HAD-- WHEN THEY WERE ORBITING EARTH, THEY HAD THE EMU. THEY HAD THAT BIG WHITE SUIT. AND THEN IT GOT A LITTLE TIGHTER, SKINTIGHT. IS THERE A CHANCE THAT MAYBE A PLANETARY SUIT WOULD BE SKINTIGHT, OR DO YOU NEED THOSE EXTRA LAYERS? >> SO YEAH, GREAT QUESTION. IT DEPENDS ON WHAT PLANET WE GO TO. >> OKAY. >> I MEAN, YOU HIT ON EARLIER THAT THERE’S A LITTLE BIT OF ATMOSPHERE IN THE LOW EARTH ORBIT THAT PROTECTS THE STATION TO A CERTAIN EXTENT AND CAUSES DRAG. WELL, ON MARS THERE’S ATMOSPHERE, AS WELL, WHEREAS OTHER PLANETS OR OTHER MOONS AROUND OTHER PLANETS THAT MAYBE IN THE FUTURE WE’LL LOOK AT GOING TO, WILL HAVE NEAR ZERO ATMOSPHERE. THAT’S WHERE YOU’LL NEED THE MULTIPLE LAYERS, LIKE IN OUR EMU RIGHT NOW. WHEN YOU HAVE THAT VERY MINIMAL ATMOSPHERE. M>> OKAY. >> THE MARS, WE SHOULD HAVE MORE OF AN ATMOSPHERE. WHAT YOU WANT THERE-- WHERE WE MAY GET TO MORE MULTIPLE LAYERS IS IF WE NEED A-- IF THE TECHNOLOGY IS NOT AVAILABLE TO HAVE ROBUSTNESS IN A SKINTIGHT SUIT, THEN YOU’LL GET THE MULTIPLE LAYERS. >> OH, OKAY. >> BECAUSE OBVIOUSLY YOU DON’T WANT A SUIT THAT’S GOING TO WEAR OUT AND GET A HOLE SOONER. THEN YOU’RE IN TROUBLE OUT THERE. >> RIGHT. >> BUT ABSOLUTELY, THOSE SKINTIGHT SUITS LIKE MATT DAMON HAD IN “THE MARTIAN,” AND THERE’S EVEN BEEN SOME PLAYED AROUND WITH HERE IN THE U.S. THAT WE’VE DONE SOME STUDIES FOR ADVANCED SUITS. THOSE ARE BY FAR PREFERRED IN THE ASPECTS OF MOBILITY. YOU CAN MOVE AROUND IN THOSE A LOT EASIER WITHOUT GETTING PAIN OR ABRASION FROM MULTIPLE LAYERS RUBBING ON YOU. YOU MENTIONED BACKPACKING EARLIER. WELL, IF YOU HAD A COUPLE PAIRS OF JEANS ON AT ONE TIME, AND THEN A NUMBER OF SHIRTS ON, AND THEN A BACKPACK, YOU’RE GOING GET BLISTERS AND PAIN IN PLACES. YOU DON’T WANT TO FEEL THAT. THAT’S THE TRADE OFF FOR IF YOU GET A SUIT WITH A LOT OF LAYERS OF INSULATION AND WHATNOT