Phreatic explosions during basaltic fissure eruptions: Kings Bowl lava field, Snake River Plain, USA

NASA Astrophysics Data System (ADS)

Hughes, Scott S.; Kobs Nawotniak, Shannon E.; Sears, Derek W. G.; Borg, Christian; Garry, William Brent; Christiansen, Eric H.; Haberle, Christopher W.; Lim, Darlene S. S.; Heldmann, Jennifer L.

2018-02-01

Physical and compositional measurements are made at the 7 km-long ( 2200 years B.P.) Kings Bowl basaltic fissure system and surrounding lava field in order to further understand the interaction of fissure-fed lavas with phreatic explosive events. These assessments are intended to elucidate the cause and potential for hazards associated with phreatic phases that occur during basaltic fissure eruptions. In the present paper we focus on a general understanding of the geological history of the site. We utilize geospatial analysis of lava surfaces, lithologic and geochemical signatures of lava flows and explosively ejected blocks, and surveys via ground observation and remote sensing. Lithologic and geochemical signatures readily distinguish between Kings Bowl and underlying pre-Kings Bowl lava flows, both of which comprise phreatic ejecta from the Kings Bowl fissure. These basalt types, as well as neighboring lava flows from the contemporaneous Wapi lava field and the older Inferno Chasm vent and outflow channel, fall compositionally within the framework of eastern Snake River Plain olivine tholeiites. Total volume of lava in the Kings Bowl field is estimated to be 0.0125 km3, compared to a previous estimate of 0.005 km3. The main (central) lava lake lost a total of 0.0018 km3 of magma by either drain-back into the fissure system or breakout flows from breached levees. Phreatic explosions along the Kings Bowl fissure system occurred after magma supply was cut off, leading to fissure evacuation, and were triggered by magma withdrawal. The fissure system produced multiple phreatic explosions and the main pit is accompanied by others that occur as subordinate pits and linear blast corridors along the fissure. The drop in magma supply and the concomitant influx of groundwater were necessary processes that led to the formation of Kings Bowl and other pits along the fissure. A conceptual model is presented that has relevance to the broader range of low-volume, monogenetic

Remote sensing and petrological observations on the 2012-2013 fissure eruption at Tolbachik volcano, Kamchatka: Implications for reconstruction of the eruption chronology

NASA Astrophysics Data System (ADS)

Melnikov, Dmitry; Volynets, Anna O.

2015-12-01

We present a reconstruction of the chronological sequence of events that took place during the first days of the 2012-2013 Tolbachik fissure eruption using petrological data and remote sensing methods. We were forced to use this approach because bad weather conditions did not allow direct observations during the first two days of the eruption. We interpreted infrared images from the scanning radiometer VIIRS Suomi NPP and correlated the output with the results of the geochemical study, including comparison of the ash, deposited at the period from 27 to 29 November, with the samples of lava and bombs erupted from the Menyailov and Naboko vents. We argue that the compositional change observed in the eruption products (the decrease of SiO2 concentration and K2O/MgO ratio, increase of MgO concentration and Mg#) started approximately 24 h after the eruption began. At this time the center of activity moved to the southern part of the fissure, where the Naboko group of vents was formed; therefore, this timeframe also characterizes the timing of the Naboko vent opening. The Naboko group of vents remained active until the end of eruption in September 2013.

Video monitoring reveals pulsating vents and propagation path of fissure eruption during the March 2011 Pu'u 'Ō'ō eruption, Kilauea volcano

NASA Astrophysics Data System (ADS)

Witt, Tanja; Walter, Thomas R.

2017-01-01

Lava fountains are a common eruptive feature of basaltic volcanoes. Many lava fountains result from fissure eruptions and are associated with the alignment of active vents and rising gas bubbles in the conduit. Visual reports suggest that lava fountain pulses may occur in chorus at adjacent vents. The mechanisms behind such a chorus of lava fountains and the underlying processes are, however, not fully understood. The March 2011 eruption at Pu'u 'Ō'ō (Kilauea volcano) was an exceptional fissure eruption that was well monitored and could be closely approached by field geologists. The fissure eruption occurred along groups of individual vents aligned above the feeding dyke. We investigate video data acquired during the early stages of the eruption to measure the height, width and velocity of the ejecta leaving eight vents. Using a Sobel edge-detection algorithm, the activity level of the lava fountains at the vents was determined, revealing a similarity in the eruption height and frequency. Based on this lava fountain time series, we estimate the direction and degree of correlation between the different vents. We find that the height and velocity of the eruptions display a small but systematic shift in time along the vents, indicating a lateral migration of lava fountaining at a rate of 11 m/s from W to E. This finding is in agreement with a propagation model of a pressure wave originating at the Kilauea volcano and propagating through the dyke at 10 m/s from W to E. Based on this approach from videos only 30 s long, we are able to obtain indirect constraints on the physical dyke parameters, with important implications for lateral magma flow processes at depth. This work shows that the recording and analysis of video data provide important constraints on the mechanisms of lava fountain pulses. Even though the video sequence is short, it allows for the confirmation of the magma propagation direction and a first-order estimation of the dyke dimensions.

Hawaiian fissure fountains 1: decoding deposits-episode 1 of the 1969-1974 Mauna Ulu eruption

USGS Publications Warehouse

Parcheta, C.E.; Houghton, Bruce F.; Swanson, D.A.

2012-01-01

Deposits from episode 1 of the 1969–1974 Mauna Ulu eruption of Kīlauea provide an exceptional opportunity to study processes of low intensity Hawaiian fissure fountains. Episode 1 lava flows passed through dense forest that had little impact on flow dynamics; in contrast, the pattern of spatter preservation was strongly influenced by the forest (through the formation of tree molds) and the preexisting topography. A low, near-continuous spatter rampart is present upwind and upslope, on the north side of the fissure. Most of the pyroclastic products, however, fell downwind to the south of the fissure, but little was preserved due to two processes: (1) incorporation of proximal spatter in rheomorphic lava flows 10–20 m from the vents, and (2) the downslope transport of cooler spatter falling on top of these flows beyond 20 m from vent. The lava flow field itself shows a complex history. Initially, discharge from the fissure exceeded the transport capacity of the southern drainage pathways, and lava ponded dynamically to a maximum height of 4 m for 40–120 min, until fountains began to decline. During declining discharge, lava flowed both southward away from the fissure and increasingly back into the vents. There is a clear “lava-shed” or delineation between where lava drained northwards back into the fissure, and where it continued flowing to the south. The 1969 deposits suggest that care is needed when products of less well-documented eruptions are analyzed, as postdepositional transport of spatter may preclude the formation of classic paired (symmetrical) ramparts.

Phreatomagmatic explosive eruptions along fissures on the top of mafic stratovolcanoes with overlapping compound calderas

NASA Astrophysics Data System (ADS)

Nemeth, Karoly; Geshi, Nobuo

2017-04-01

On near summit flank eruptions on stratovolcanoes it is commonly inferred that external water to have little or no influence on the course of the eruptions. Hence eruptions are typicaly "dry" that form spatter-dominated fissures and scoria cones. This assumption is based on that in elevated regions - especially on steep slopes - the hydrogeological conditions are not favourable to store large volume of ground water that can have effect on the eruptions. However there is some controversial trend of eruption progression from an early dry eruption below the summit that later turn to be phreatomagmatic as the eruption locus migrates toward the summit. The Suoana Ccrater on top of Miyakejima Island's mafic stratovolcano is a fine example to demonstrate such process. Suona Crater is the topmost crater of the 3 km long fissure aligned chain of small-volume volcanoes that formed in the 7th century flank of the summit region of the Miyakejima mafic stratovolcano. The oval shape crater of Suona (400 x 300 m) is surrounded by a tuff ring that developed over lava flows and epiclastic deposits accumulated in an older caldera forming about a tuff ring that is about 25 m in its thickest section with a basal consistent lava spatter dominated unit gradually transforming into a more scoria-dominated middle unit. A caldera-forming eruption in AD 2000 half-sectioned the Suona Crater exposing of its internal diatreme - crater in-fill - tephra rim succession providing a unique opportunity to understand the 3D architecture of the volcano. Toward the top of the preserved and exposed tuff ring section a clear gradual transition can be seen toward more abundance of chilled dark juvenile particles providing a matrix of a coarse ash that commonly hold cauliflower lapilli and bomb. This transition indicates that the eruption progressed from an early dry explosive phase such as lava fountaining to be a more Strombolian style explosive eruption that later on turned to be heavily influenced by

Overview of the precursors and dynamics of the 2012-13 basaltic fissure eruption of Tolbachik Volcano, Kamchatka, Russia

NASA Astrophysics Data System (ADS)

Belousov, Alexander; Belousova, Marina; Edwards, Benjamin; Volynets, Anna; Melnikov, Dmitry

2015-12-01

We present a broad overview of the 2012-13 flank fissure eruption of Plosky Tolbachik Volcano in the central Kamchatka Peninsula. The eruption lasted more than nine months and produced approximately 0.55 km3 DRE (volume recalculated to a density of 2.8 g/cm3) of basaltic trachyandesite magma. The 2012-13 eruption of Tolbachik is one of the most voluminous historical eruptions of mafic magma at subduction related volcanoes globally, and it is the second largest at Kamchatka. The eruption was preceded by five months of elevated seismicity and ground inflation, both of which peaked a day before the eruption commenced on 27 November 2012. The batch of high-Al magma ascended from depths of 5-10 km; its apical part contained 54-55 wt.% SiO2, and the main body 52-53 wt.% SiO2. The eruption started by the opening of a 6 km-long radial fissure on the southwestern slope of the volcano that fed multi-vent phreatomagmatic and magmatic explosive activity, as well as intensive effusion of lava with an initial discharge of > 440 m3/s. After 10 days the eruption continued only at the lower part of the fissure, where explosive and effusive activity of Hawaiian-Strombolian type occurred from a lava pond in the crater of the main growing scoria cone. The discharge rate for the nine month long, effusion-dominated eruption gradually declined from 140 to 18 m3/s and formed a compound lava field with a total area of 36 km2; the effusive activity evolved from high-discharge channel-fed 'a'a lavas to dominantly low-discharge tube-fed pahoehoe lavas. On 23 August, the effusion of lava ceased and the intra-crater lava pond drained. Weak Strombolian-type explosions continued for several more days on the crater bottom until the end of the eruption around 5 September 2013. Based on a broad array of new data collected during this eruption, we develop a model for the magma storage and transport system of Plosky Tolbachik that links the storage zones of the two main genetically related magma types

Shallow Subsurface Structures of Volcanic Fissures

NASA Astrophysics Data System (ADS)

Parcheta, C. E.; Nash, J.; Mitchell, K. L.; Parness, A.

2015-12-01

Volcanic fissure vents are a difficult geologic feature to quantify. They are often too thin to document in detail with seismology or remote geophysical methods. Additionally, lava flows, lava drain back, or collapsed rampart blocks typically conceal a fissure's surface expression. For exposed fissures, quantifying the surface (let along sub0surface) geometric expression can become an overwhelming and time-consuming task given the non-uniform distribution of wall irregularities, drain back textures, and the larger scale sinuosity of the whole fissure system. We developed (and previously presented) VolcanoBot to acquire robust characteristic data of fissure geometries by going inside accessible fissures after an eruption ends and the fissure cools off to <50 C. Data from VolcanoBot documents the fissure conduit geometry with a near-IR structured light sensor, and reproduces the 3d structures to cm-scale accuracy. Here we present a comparison of shallow subsurface structures (<30 m depth) within the Mauna Ulu fissure system and their counterpart features at the vent-to-ground-surface interface. While we have not mapped enough length of the fissure to document sinuosity at depth, we see a self-similar pattern of irregularities on the fissure walls throughout the entire shallow subsurface, implying a fracture mechanical origin similar to faults. These irregularities are, on average, 1 m across and protrude 30 cm into the drained fissure. This is significantly larger than the 10% wall roughness addressed in the engineering literature on fluid dynamics, and implies that magma fluid dynamics during fissure eruptions are probably not as passive nor as simple as previously thought. In some locations, it is possible to match piercing points across the fissure walls, where the dike broke the wall rock in order to propagate upwards, yet in other locations there are erosional cavities, again, implying complex fluid dynamics in the shallow sub-surface during fissure eruptions.

Assessing the atmospheric and climatic effects of basaltic fissure eruptions. A case study Nornahraun, North Iceland, 2014-2015.

NASA Astrophysics Data System (ADS)

Gallagher, Catherine; Burton, Kevin; Thordarson, Thorvaldur; Vye-Brown, Charlotte; Brown, Richard

2015-04-01

A volcanic eruption's ability to release sulphur gases into the atmosphere is one of the critical factors in assessing their climatic and environmental effects, because it is directly linked to the potential H2SO4 aerosol burden produced [1]. Basaltic fissure eruptions loft large amounts of sulphur into the atmosphere because of the efficient degassing of volatiles and halogens from the magma at the vent [2-4] coupled with the high sulphur yield of basaltic magma. The common nature of this style of eruption and its products, regardless of magnitude, means that our understanding of the exact processes which influence atmospheric chemistry and environmental impact is very important. The Nornahraun fissure eruption in North Iceland that began on the 31st August 2014, has quickly become one of the best documented eruptions of its kind, through systematic monitoring and sampling by the Institute of Earth Sciences eruption team and The Icelandic Meteorological Office. As a result it is an excellent modern analogue for historic or ancient basaltic fissure eruptions, for which the amount of degassing can only be estimated through petrological and geochemical methods. It also serves as a timely testing platform for novel geochemical proxies. This study uses the exceptional sensitivity of the 187Os-187Re radiogenic system to the presence of crustal material [5], and highly siderophile stable isotopes Cu, Zn and S to indicate the chemistry and degassing of the melt carrying S to the surface. The geochemical isotopic proxies will be tested using established petrological methods and gas emission data. This study concentrates on determining the following key parameters: (1) The source of volatiles in the magma indicated though the pressure dependence of S solubility. (2) The mechanism of aerosol and gas release into the atmosphere is dictated both by the chemistry of the melt that controls the S species (H2S, SO2 or FeS2) present [6], and by the mechanism of transfer. (3) The

Seismic processes and migration of magma during the Great Tolbachik Fissure Eruption of 1975-1976 and Tolbachik Fissure Eruption of 2012-2013, Kamchatka Peninsula

NASA Astrophysics Data System (ADS)

Fedotov, S. A.; Slavina, L. B.; Senyukov, S. L.; Kuchay, M. S.

2015-12-01

Seismic and volcanic processes in the area of the northern group of volcanoes (NGV) in Kamchatka Peninsula that accompanied the Great Tolbachik Fissure Eruption (GTFE) of 1975-1976 and the Tolbachik Fissure Eruption (TFE, or "50 let IViS" due to anniversary of the Institute of Volcanology and Seismology, Far East Branch, Russian Academy of Sciences) of 2012-2013 and the seismic activity between these events are considered. The features of evolution of seismic processes of the major NGV volcanoes (Ploskii Tolbachik, Klyuchevskoy, Bezymannyi, and Shiveluch) are revealed. The distribution of earthquakes along depth, their spatial and temporal migration, and the relation of seismic and volcanic activity are discussed. The major features of seismic activity during the GTFE preparation and evolution and a development of earthquake series preceding the origin of the northern and southern breaks are described. The character of seismic activity between the GTFE and TFE is shown. The major peculiarities of evolution of seismic activity preceding and accompanying the TFE are described. The major magma sources and conduits of the NGV volcanoes are identified, as is the existence of a main conduit in the mantle and a common intermediate source for the entire NGV, the depth of which is 25-35 km according to seismic data. The depth of a neutral buoyancy layer below the NGV is 15-20 km and the source of areal volcanism of magnesian basalts northeast of the Klyuchevskoy volcano is located at depth of ~20 km. These data support the major properties of a 2010 geophysical model of magmatic feeding system of the Klyuchevskoy group of volcanoes. The present paper covers a wider NGV area and is based on the real experimental observations.

Dynamics and functional model of the 2012-13 flank fissure eruption of Tolbachik volcano in Kamchatka, Russia

NASA Astrophysics Data System (ADS)

Belousov, Alexander; Belousova, Marina; Edwards, Benjamin

2017-04-01

The 2012-13 flank fissure eruption of Tolbachik in Kamchatka Peninsula lasted more than nine months and discharged 0.55 cub.km DRE of basaltic trachyandesite magma. It is one of the most voluminous historical eruptions of mafic magma at subduction-related volcano globally, and is the second largest in Kamchatka. We present a broad overview of the eruption as well as a model for the magma storage and transport system of Plosky Tolbachik Volcano. The 2012-13 eruption was preceded by five months of elevated seismicity and ground inflation, both of which peaked a day before the eruption commenced on 27 November 2012. The batch of high-Al magma ascended from depths of 5-10 km; its apical part contained 54-55 wt.% SiO2, and the main body 52-53 wt.% SiO2. The eruption started by the opening of a 6 km-long radial fissure on the southwestern slope of the volcano that fed multi-vent phreatomagmatic and magmatic explosive activity, as well as intensive effusion of lava with an initial discharge of 440 cub.m/s. After 10 days the eruption continued only at the lower part of the fissure, where explosive and effusive activity of Hawaiian-Strombolian type occurred from a lava pond in the crater of the main growing scoria cone. The discharge rate for the nine month long, effusion-dominated eruption gradually declined from 140 to 18 cub.m/s and formed a compound lava field with a total area of 36 sq.km; the effusive activity evolved from high-discharge channel-fed 'a'a lavas to dominantly low-discharge tube-fed pahoehoe lavas. On 23 August, the effusion of lava ceased and the intra-crater lava pond drained. Weak Strombolian-type explosions continued for several more days on the crater bottom until the end of the eruption around 5 September 2013. The volcanic system, comprising the stratovolcano Plosky Tolbachik and its two radial volcanic rifts, produces alternating eruptions of two genetically related magma types: high-Al basalt (eruptions at the summit and along both rift zones

A Volcanic Fissure

NASA Image and Video Library

2017-04-26

Although Mars is known for having the largest volcano in our solar system, Olympus Mons, we also find small-scale volcanic features on its surface, as shown in this image from HiRISE onboard NASA's Mars Reconnaissance Orbiter (MRO). This fissure, less than 500 meters across at its widest point, lies in the Tharsis region and is believed to be a vent from which lava flowed in ancient eruptions. The total volume of lava released from this fissure is much less than what would erupt from nearby volcanoes, but the mark left on the landscape is dramatic nonetheless. https://photojournal.jpl.nasa.gov/catalog/PIA21601

Dike Propagation Mechanisms from Seismicity Accompanying the 2014 Bárðarbunga-Holuhraun Fissure Eruption, Iceland

NASA Astrophysics Data System (ADS)

Woods, J.; Ágústsdóttir, T.; Greenfield, T. S.; Green, R. G.; White, R. S.; Brandsdottir, B.

2015-12-01

We present data from our dense seismic network which captured in unprecedented detail the micro-seismicity associated with the 2014 dike intrusion from the subglacial Bárðarbunga volcano in central Iceland. Over 30,000 automatically located earthquakes delineate a complex 46 km dike propagation during the days preceding the onset of effusive magmatism at the Holuhraun lava field on 29 August 2014. Approximately 1.5 km3 of lava was erupted, making this the largest eruption in Iceland for over 200 years.Micro-seismicity tracks the lateral migration of the dike, with a concentration of earthquakes in the advancing tip where stresses are greatest, and trailing zones of lesser or no seismicity behind. Onset of an initial 4 hour fissure eruption was accompanied simultaneously by a backward retreat in seismic activity, followed by a gradual re-advance prior to the onset of a second, sustained fissure eruption in the same location on 31 August. Rock fracture mechanisms are determined from fault plane solutions of these seismic events. At the tip of the advancing dike, left-lateral strike-slip faulting parallel to the propagation is dominant, utilising pre-existing lineations and releasing stress accumulated in the brittle layer from rift zone extension. Behind the dike tip, both right-lateral and left-lateral strike-slip earthquakes are found, marking failure of solidifying magma plugs within the dike conduit. Contrary to many models of dike propagation, both normal faulting and failure at high angles to the dike are rare. Furthermore, a distinct lack of seismicity is observed in the 3-4 km region beneath the surface rupture. This suggests that opening is occuring aseismically, with earthquakes focused at the base of the dike near the brittle-ductile boundary.

Assessing eruption column height in ancient flood basalt eruptions

NASA Astrophysics Data System (ADS)

Glaze, Lori S.; Self, Stephen; Schmidt, Anja; Hunter, Stephen J.

2017-01-01

A buoyant plume model is used to explore the ability of flood basalt eruptions to inject climate-relevant gases into the stratosphere. An example from the 1986 Izu-Oshima basaltic fissure eruption validates the model's ability to reproduce the observed maximum plume heights of 12-16 km above sea level, sustained above fire-fountains. The model predicts maximum plume heights of 13-17 km for source widths of between 4-16 m when 32% (by mass) of the erupted magma is fragmented and involved in the buoyant plume (effective volatile content of 6 wt%). Assuming that the Miocene-age Roza eruption (part of the Columbia River Basalt Group) sustained fire-fountains of similar height to Izu-Oshima (1.6 km above the vent), we show that the Roza eruption could have sustained buoyant ash and gas plumes that extended into the stratosphere at ∼ 45 ° N. Assuming 5 km long active fissure segments and 9000 Mt of SO2 released during explosive phases over a 10-15 year duration, the ∼ 180km of known Roza fissure length could have supported ∼36 explosive events/phases, each with a duration of 3-4 days. Each 5 km fissure segment could have emitted 62 Mt of SO2 per day into the stratosphere while actively fountaining, the equivalent of about three 1991 Mount Pinatubo eruptions per day. Each fissure segment could have had one to several vents, which subsequently produced lava without significant fountaining for a longer period within the decades-long eruption. Sensitivity of plume rise height to ancient atmospheric conditions is explored. Although eruptions in the Deccan Traps (∼ 66Ma) may have generated buoyant plumes that rose to altitudes in excess of 18 km, they may not have reached the stratosphere because the tropopause was substantially higher in the late Cretaceous. Our results indicate that some flood basalt eruptions, such as Roza, were capable of repeatedly injecting large masses of SO2 into the stratosphere. Thus sustained flood basalt eruptions could have influenced

Assessing Eruption Column Height in Ancient Flood Basalt Eruptions

NASA Technical Reports Server (NTRS)

Glaze, Lori S.; Self, Stephen; Schmidt, Anja; Hunter, Stephen J.

2015-01-01

A buoyant plume model is used to explore the ability of flood basalt eruptions to inject climate-relevant gases into the stratosphere. An example from the 1986 Izu-Oshima basaltic fissure eruption validates the model's ability to reproduce the observed maximum plume heights of 12-16 km above sea level, sustained above fire-fountains. The model predicts maximum plume heights of 13-17 km for source widths of between 4-16 m when 32% (by mass) of the erupted magma is fragmented and involved in the buoyant plume (effective volatile content of 6 wt%). Assuming that the Miocene-age Roza eruption (part of the Columbia River Basalt Group) sustained fire-fountains of similar height to Izu-Oshima (1.6 km above the vent), we show that the Roza eruption could have sustained buoyant ash and gas plumes that extended into the stratosphere at approximately 45 deg N. Assuming 5 km long active fissure segments and 9000 Mt of SO2 released during explosive phases over a 10-15 year duration, the approximately 180 km of known Roza fissure length could have supported approximately 36 explosive events/phases, each with a duration of 3-4 days. Each 5 km fissure segment could have emitted 62 Mt of SO2 per day into the stratosphere while actively fountaining, the equivalent of about three 1991 Mount Pinatubo eruptions per day. Each fissure segment could have had one to several vents, which subsequently produced lava without significant fountaining for a longer period within the decades-long eruption. Sensitivity of plume rise height to ancient atmospheric conditions is explored. Although eruptions in the Deccan Traps (approximately 66 Ma) may have generated buoyant plumes that rose to altitudes in excess of 18 km, they may not have reached the stratosphere because the tropopause was substantially higher in the late Cretaceous. Our results indicate that some flood basalt eruptions, such as Roza, were capable of repeatedly injecting large masses of SO2 into the stratosphere. Thus sustained

Is Kīlauea's East Rift Zone eruption running out of gas?

NASA Astrophysics Data System (ADS)

Sutton, A. J.; Elias, T.; Orr, T. R.; Patrick, M. R.; Poland, M. P.; Thornber, C. R.

2015-12-01

Gases exsolving from magma are a key force that drives eruptive activity, and emissions from Kīlauea's East Rift Zone (ERZ) dominated the volcano's gas release from the beginning of the long-running and voluminous Pu'u 'Ō'ō eruption in 1983, through February 2008. In the months prior to the March 2008 onset of eruptive activity within Halema'uma'u Crater, however, SO2 degassing at the summit climbed substantially, and summit gas release has remained elevated since. These unprecedented emissions associated with the new summit eruption effectively began robbing gas from magma destined for Kīlauea's ERZ. As a result, ERZ SO2discharge, which had averaged 1,700 +-380 t/d for the previous 15 years, declined sharply and steadily beginning in September, 2008, and reached a new steady low of 380 +- 100 t/d by early 2011. This level persisted through mid-2015. In the years since the late 2008 downturn in ERZ SO2 emissions, there has been an overall slowdown in ERZ eruptive activity. Elevated emissions and effusive activity occurred briefly during the 2011 Kamoamoa fissure eruption and two other outbreaks at Pu'u 'Ō'ō , but otherwise ERZ eruptive activity had waned by 2010, when effusion rates were measured at about half of the long-term rate. Also, the sulfur preserved in ERZ olivine melt-inclusions, which provides a record of pre-eruptive SO2degassing, has steadily declined along with equilibration temperatures of host olivine phenocrysts, since 2008. We suggest that the drop in gas content of magma reaching the ERZ, owing to summit pre-eruptive degassing, has contributed significantly to the downturn in ERZ activity. While SO2 emissions from the ERZ have dropped to sustained levels lower than anything seen in the past 20 years, summit emissions have remained some of the highest recorded since regular measurements began at Kīlauea in 1979. Overall, average total SO2 discharge from Kīlauea in 2014, summit and ERZ, is still about 50% higher than for the 15 years prior

Shallow Subsurface transport and eruption of basaltic foam

NASA Astrophysics Data System (ADS)

Parcheta, C. E.; Mitchell, K. L.

2016-12-01

Volcanic fissure vents are difficult to quantify, and details of eruptive behavior are elusive even though it is the most common eruption mechanism on Earth and across the solar system. A fissure's surface expression is typically concealed, but when a fissure remains exposed, its subsurface conduit can be mapped post-eruptively with VolcanoBot. The robot uses a NIR structured light sensor that reproduces a 3D surface model to cm-scale accuracy, documenting the shallow conduit. VolcanoBot3 has probed >1000m3 of volcanic fissure vents at the Mauna Ulu fissure system on Kilauea. Here we present the new 3D model of a flared vent on the Mauna Ulu fissure system. We see a self-similar pattern of irregularities on the fissure walls throughout the entire shallow subsurface, implying a fracture mechanical origin similar to faults. These irregularities are typically 1 m across, protrude 30 cm horizontally into the drained fissure, and have a vertical spacing of 2-3 m. However, irregularity size is variable and distinct with depth, potentially reflecting stratigraphy in the wall rock. Where piercing points are present, we infer the dike broke the wall rock in order to propagate upwards; where they are not, we infer that syn-eruptive mechanical erosion has taken place. One mechanism for mechanical erosion is supersonic shocks, which may occur in Hawaiian fountains. We are calculating the speed of sound in 64% basaltic foam, which appears to be the same velocity (or slightly slower) than inferred eruption velocities. Irregularities are larger than the maximum 10% wall roughness used in engineering fluid dynamic studies, indicating that magma fluid dynamics during fissure eruptions are probably not as passive nor as simple as previously thought. We are currently using the mapped conduit geometries and derived speed of sound for basaltic foam in fluid dynamical modeling of fissure-fed lava fountains.

Understanding the environmental impacts of large fissure eruptions: Aerosol and gas emissions from the 2014-2015 Holuhraun eruption (Iceland)

NASA Astrophysics Data System (ADS)

Ilyinskaya, Evgenia; Schmidt, Anja; Mather, Tamsin A.; Pope, Francis D.; Witham, Claire; Baxter, Peter; Jóhannsson, Thorsteinn; Pfeffer, Melissa; Barsotti, Sara; Singh, Ajit; Sanderson, Paul; Bergsson, Baldur; McCormick Kilbride, Brendan; Donovan, Amy; Peters, Nial; Oppenheimer, Clive; Edmonds, Marie

2017-08-01

The 2014-2015 Holuhraun eruption in Iceland, emitted ∼11 Tg of SO2 into the troposphere over 6 months, and caused one of the most intense and widespread volcanogenic air pollution events in centuries. This study provides a number of source terms for characterisation of plumes in large fissure eruptions, in Iceland and elsewhere. We characterised the chemistry of aerosol particle matter (PM) and gas in the Holuhraun plume, and its evolution as the plume dispersed, both via measurements and modelling. The plume was sampled at the eruptive vent, and in two populated areas in Iceland. The plume caused repeated air pollution events, exceeding hourly air quality standards (350 μg/m3) for SO2 on 88 occasions in Reykjahlíð town (100 km distance), and 34 occasions in Reykjavík capital area (250 km distance). Average daily concentration of volcanogenic PM sulphate exceeded 5 μg/m3 on 30 days in Reykjavík capital area, which is the maximum concentration measured during non-eruptive background interval. There are currently no established air quality standards for sulphate. Combining the results from direct sampling and dispersion modelling, we identified two types of plume impacting the downwind populated areas. The first type was characterised by high concentrations of both SO2 and S-bearing PM, with a high Sgas/SPM mass ratio (SO2(g)/SO42-(PM) > 10). The second type had a low Sgas/SPM ratio (<10). We suggest that this second type was a mature plume where sulphur had undergone significant gas-to-aerosol conversion in the atmosphere. Both types of plume were rich in fine aerosol (predominantly PM1 and PM2.5), sulphate (on average ∼90% of the PM mass) and various trace species, including heavy metals. The fine size of the volcanic PM mass (75-80% in PM2.5), and the high environmental lability of its chemical components have potential adverse implications for environmental and health impacts. However, only the dispersion of volcanic SO2 was forecast in public warnings

A robotic approach to mapping post-eruptive volcanic fissure conduits

NASA Astrophysics Data System (ADS)

Parcheta, Carolyn E.; Pavlov, Catherine A.; Wiltsie, Nicholas; Carpenter, Kalind C.; Nash, Jeremy; Parness, Aaron; Mitchell, Karl L.

2016-06-01

VolcanoBot was developed to map volcanic vents and their underlying conduit systems, which are rarely preserved and generally inaccessible to human exploration. It uses a PrimeSense Carmine 1.09 sensor for mapping and carries an IR temperature sensor, analog distance sensor, and an inertial measurement unit (IMU) inside a protective shell. The first field test succeeded in collecting valuable scientific data but revealed several needed improvements, including more rugged cable connections and mechanical couplers, increased ground clearance, and higher-torque motors for uphill mobility. The second field test significantly improved on all of these aspects but it traded electrical ruggedness for reduced data collection speed. Data collected by the VolcanoBots, while intermittent, yield the first insights into the cm-scale geometry of volcanic fissures at depths of up to 25 m. VolcanoBot was deployed at the 1969 Mauna Ulu fissure system on Kīlauea volcano in Hawai'i. It collected first-of-its-kind data from inside the fissure system. We hypothesized that 1) fissure sinuosity should decrease with depth, 2) irregularity should be persistent with depth, 3) any blockages in the conduit should occur at the narrowest points, and 4) the fissure should narrow with depth until it is too narrow for VolcanoBot to pass or is plugged with solidified lava. Our field campaigns did not span enough lateral or vertical area to test sinuosity. The preliminary data indicate that 1) there were many irregularities along fissures at depth, 2) blockages occurred, but not at obviously narrow locations, and 3) the conduit width remained a consistent 0.4-0.5 m for most of the upper 10 m that we analyzed.

Volcanic Eruptions of the EPR and Ridge Axis Segmentation: An Interdisciplinary View

NASA Astrophysics Data System (ADS)

White, S.; Soule, S. A.; Tolstoy, M.; Waldhauser, F.; Rubin, K.

2008-12-01

The eruption of the EPR in 2005-06 provides an ideal window into the relationship between fine-scale segmentation of the ridge axis and individual eruptive episodes. Lava flow mapping of the eruption by visual and acoustic images, precise dates on multiple eruptive units, stress information from seismicity, long-term records of hydrothermal activity, and well known segment boundaries illustrate the relationships between eruptions and segmentation of mid-ocean ridges. Lava flows emerged from several sections of the axial summit trough (AST) during the eruption, presumably from en echelon fissures between 9 45'N and 9 57'N. Each en echelon fissure is a 4th order segment, and the overall area matches the 3rd Order segment between ~9 45'N and ~9 58'N. Within the eruption, the primary eruptive fissure jumped east by 600 m at 9 53'N, and ran along an inward facing fault scarp, although limited lava effusion also extended northward along the axial fissure. A zone of high seismicity connects the normal fault bounding the eastern fissure eruption with the main locus of eruption on the ridge axis to the south, suggesting that the offset eruption may have occurred in response to stress buildup on this fault. Radiometric ages indicate that the entire along-axis extent of the eruptive fissures activated initially, but that volcanic activity focused to a single fourth-order segment within 1-3 months. Previously indentified breaks in the AST and its overall outline were largely unchanged by the eruption. These observations support the hypothesis that fourth-order segments are offsets controlled by the mechanics of dike emplacement, whereas third-order segments represent discrete volcanic systems. Dike segmentation may be controlled by variations in underlying ridge structure or the magma reservoir. Hydrothermal systems disrupted as far south as 9 37'N may be responding to cracking due to stress interaction or share a common deeper magmatic source. Comparisons between the 1991 EPR

Time-series analysis of fissure-fed multi-vent activity: a snapshot from the July 2014 eruption of Etna volcano (Italy)

NASA Astrophysics Data System (ADS)

Spina, L.; Taddeucci, J.; Cannata, A.; Sciotto, M.; Del Bello, E.; Scarlato, P.; Kueppers, U.; Andronico, D.; Privitera, E.; Ricci, T.; Pena-Fernandez, J.; Sesterhenn, J.; Dingwell, D. B.

2017-07-01

On 5 July 2014, an eruptive fissure opened on the eastern flank of Etna volcano (Italy) at 3.000 m a.s.l. Strombolian activity and lava effusion occurred simultaneously at two neighbouring vents. In the following weeks, eruptive activity led to the build-up of two cones, tens of meters high, here named Crater N and Crater S. To characterize the short-term (days) dynamics of this multi-vent system, we performed a multi-parametric investigation by means of a dense instrumental network. The experimental setup, deployed on July 15-16th at ca. 300 m from the eruption site, comprised two broadband seismometers and three microphones as well as high speed video and thermal cameras. Thermal analyses enabled us to characterize the style of eruptive activity at each vent. In particular, explosive activity at Crater N featured higher thermal amplitudes and a lower explosion frequency than at Crater S. Several episodes of switching between puffing and Strombolian activity were noted at Crater S through both visual observation and thermal data; oppositely, Crater N exhibited a quasi-periodic activity. The quantification of the eruptive style of each vent enabled us to infer the geometry of the eruptive system: a branched conduit, prone to rapid changes of gas flux accommodated at the most inclined conduit (i.e. Crater S). Accordingly, we were able to correctly interpret acoustic data and thereby extend the characterization of this two-vent system.

The Averno 2 fissure eruption: a recent small-size explosive event at the Campi Flegrei Caldera (Italy)

NASA Astrophysics Data System (ADS)

di Vito, Mauro Antonio; Arienzo, Ilenia; Braia, Giuseppe; Civetta, Lucia; D'Antonio, Massimo; di Renzo, Valeria; Orsi, Giovanni

2011-04-01

The Averno 2 eruption (3,700 ± 50 a B.P.) was an explosive low-magnitude event characterized by magmatic and phreatomagmatic explosions, generating mainly fall and surge beds, respectively. It occurred in the Western sector of the Campi Flegrei caldera (Campanian Region, South Italy) at the intersection of two active fault systems, oriented NE and NW. The morphologically complex crater area, largely filled by the Averno lake, resulted from vent activation and migration along the NE-trending fault system. The eruption generated a complex sequence of pyroclastic deposits, including pumice fall deposits in the lower portion, and prevailing surge beds in the intermediate-upper portion. The pyroclastic sequence has been studied through stratigraphical, morphostructural and petrological investigations, and subdivided into three members named A through C. Member A was emplaced during the first phase of the eruption mainly by magmatic explosions which generated columns reaching a maximum height of 10 km. During this phase the eruption reached its climax with a mass discharge rate of 3.2 106 kg/s. Intense fracturing and fault activation favored entry of a significant amount of water into the system, which produced explosions driven by variably efficient water-magma interaction. These explosions generated wet to dry surge deposits that emplaced Member B and C, respectively. Isopachs and isopleths maps, as well as areal distribution of ballistic fragments and facies variation of surge deposits allow definition of four vents that opened along a NE oriented, 2 km long fissure. The total volume of magma extruded during the eruption has been estimated at about 0.07 km3 (DRE). The erupted products range in composition from initial, weakly peralkaline alkali-trachyte, to last-emplaced alkali-trachyte. Isotopic data and modeling suggest that mixing occurred during the Averno 2 eruption between a more evolved, less radiogenic stored magma, and a less evolved, more radiogenic magma

Deep Structure of the Zone of Tolbachik Fissure Eruptions (Kamchatka, Klyuchevskoy Volcano Group): Evidence from a Complex of Geological and Geophysical Data

NASA Astrophysics Data System (ADS)

Kugaenko, Yu. A.; Saltykov, V. A.; Gorvatikov, A. V.; Stepanova, M. Yu.

2018-05-01

With the use of the method of low-frequency microseismic sounding, the configuration of the magmatic feeding system of the Tolbachinsky Dol—a regional zone of areal basaltic volcanism in the southern part of the Klyuchevskoy volcano group in Kamchatka—is studied. The initial data are obtained by a stepby-step recording of the background microseismic noise in 2010-2015 within a thoroughly marked-out survey area covering the zones of fissure eruptions in 1975-1976 and 2012-2013 and, partly, the edifice of the Ploskii (flat) Tolbachik volcano. The depth sections reflecting the distributions of the relative velocities of seismic waves in the Earth's crust are constructed. For a more reliable interpretation of the revealed deep anomalies, the results of independent geological and geophysical studies are used. The ascertained low-velocity structures are closely correlated to the manifestations of present-day volcanism. It is shown that the feeding structure of the Tolbachinsky Dol is spatially heterogeneous, incorporating subvertical and lateral pipeshaped magma conduits, closely spaced magma feeding channels, and shallow magma reservoirs. A longlived local transcrustal magma conducting zone is revealed, and regularities in the deep structure of the feeding systems of fissure eruptions are identified. The configuration of the established subvertical magma conduits permits basalts moving to rise to the surface by different paths, which, inter alia, explains the contrasting magma compositions observed during a single eruption. Thus, based on the instrumental data, it is shown that the magmatic feeding structure of the Tolbachinsky Dol has a number of specific peculiarities and is significantly more complicated than has been previously thought about the areal volcanic fields.

Simulating the propagation of sulphur dioxide emissions from the fissure eruption in the Holuhraun lava field (Iceland) with the EURAD-IM

NASA Astrophysics Data System (ADS)

Fröhlich, Luise; Franke, Philipp; Friese, Elmar; Haas, Sarah; Lange, Anne Caroline; Elbern, Hendrik

2015-04-01

In the emergency case of a volcano eruption accurate forecasts of the transport of ash and gas emissions are crucial for health protection and aviation safety. In the frame of Earth System Knowledge Platform (ESKP) near real-time forecasts of ash and SO2 dispersion emitted by active volcanoes are simulated by the European Air pollution Dispersion Inverse Model (EURAD-IM). The model is driven by the Weather Research and Forecasting Model (WRF) and includes detailed gas phase and particle dynamics modules, which allow for quantitative estimates of measured volcano releases. Former simulations, for example related to the Eyjafjallajökull outbreak in 2010, were in good agreement with measurement records of particle number and SO2 at several European stations. At the end of August 2014 an fissure eruption has begun on Iceland in the Holuhraun lava field to the north-east of the Bardarbunga volcano system. In contrast to the explosive eruption of the Eyjafjallajökull in 2010, the Holuhraun eruption is rather effusive with a large and continuous flow of lava and a significant release of sulphur dioxide (SO2) in the lower troposphere, while ash emissions are insignificant. Since the Holuhraun fissure eruption has started, daily forecasts of SO2 dispersion are produced for the European region (15 km horizontal resolution grid) and published on our website (http://apps.fz-juelich.de/iek-8/RIU/vorhersage_node.php). To simulate the transport of volcanic emissions, realistic source terms like mass release rates of ash and SO2 or plume heights are required. Since no representative measurements are currently available for the simulations, rough qualitative assumptions, based on reports from the Icelandic Met Office (IMO), are used. However, frequent comparisons with satellite observations show that the actual propagation of the volcanic emissions is generally well reflected by the model. In the middle of September 2014 several European measurement sides recorded extremely high

Coupling Eruptive Dynamics Models to Multi-fluid Plasma Dynamic Simulations at Enceladus

NASA Astrophysics Data System (ADS)

Paty, C. S.; Dufek, J.; Waite, J. H.; Tokar, R. L.

2011-12-01

The interaction of Saturn's magnetosphere with Enceladus provides an exciting natural laboratory for expanding our understanding of charge-neutral-dust interactions and their impact on mass and momentum loading of the system and the associated magnetic perturbations. However, one of the more challenging questions regarding the Enceladus plume relates to the subsurface eruptive mechanism responsible for generating the observed jets of material that compose the plume, and the three-dimensional distribution of neutral gas and dust in the plume. In this work we implement a multiphase eruptive dynamics model [cf. Dufek & Bergantz, 2007; Dufek and Bergantz, 2005] to examine the evolution of the plume morphology for a given eruption. We model the eruptive mechanism in a two-part, coupled domain including a fissure model and a plume model. A high resolution, multiphase, fissure model examines eruptive processes in a fissure from fragmentation to the surface. The fissure model is two-dimensional and provides spatial and temporal information about the dust/ice grains and gas. The depth to the fragmentation surface is currently treated as a free parameter and we examine a range of fissure morphologies. We do not explicitly force choked conditions at the vent, but rather due to the geometry, the velocities of the particle and gas mixture approach the sound speed for a 'dusty' gas mixture. The fissure model provides a source for the 3D plume model which examines the morphology of the plume resulting from different fissure configurations and provides a self-consistent physical basis to link concentrations in different regions of the plume to an eruptive mechanism. These initial models describing the resulting gas and dust grain distribution will be presented in the context of existing observations. We will also demonstrate the first stages of integration of these results into the existing multi-fluid plasma dynamic simulations of Enceladus' interaction with Saturn

Three-armed rifts or masked radial pattern of eruptive fissures? The intriguing case of El Hierro volcano (Canary Islands)

NASA Astrophysics Data System (ADS)

Becerril, L.; Galindo, I.; Martí, J.; Gudmundsson, A.

2015-04-01

Using new surface structural data as well as subsurface structural data obtained from seventeen water galleries, we provide a comprehensive model of the volcano-tectonic evolution of El Hierro (Canary Islands). We have identified, measured and analysed more than 1700 volcano-structural elements including vents, eruptive fissures, dykes and faults. The new data provide important information on the main structural patterns of the island and on its stress and strain fields, all of which are crucial for reliable hazard assessments. We conducted temporal and spatial analyses of the main structural elements, focusing on their relative age and association with the three main cycles in the construction of the island: the Tiñor Edifice, the El Golfo-Las Playas Edifice, and the Rift Volcanism. A radial strike distribution, which can be related to constructive episodes, is observed in the on-land structures. A similar strike distribution is seen in the submarine eruptive fissures, which are radial with respect to the centre of the island. However, the volcano-structural elements identified onshore and reflecting the entire volcano-tectonic evolution of the island also show a predominant NE-SW strike, which coincides with the main regional trend of the Canary archipelago as a whole. Two other dominant directions of structural elements, N-S and WNW-ESE, are evident from the establishment of the El Golfo-Las Playas edifice, during the second constructive cycle. We suggest that the radial-striking structures reflect comparatively uniform stress fields during the constructive episodes, mainly conditioned by the combination of overburden pressure, gravitational spreading, and magma-induced stresses in each of the volcanic edifices. By contrast, in the shallower parts of the edifice the NE-SW, N-S and WNW-ESE-striking structures reflect local stress fields related to the formation of mega-landslides and masking the general and regional radial patterns.

Engineering a robotic approach to mapping exposed volcanic fissures

NASA Astrophysics Data System (ADS)

Parcheta, C. E.; Parness, A.; Mitchell, K. L.

2014-12-01

Field geology provides a framework for advanced computer models and theoretical calculations of volcanic systems. Some field terrains, though, are poorly preserved or accessible, making documentation, quantification, and investigation impossible. Over 200 volcanologists at the 2012 Kona Chapman Conference on volcanology agreed that and important step forward in the field over the next 100 years should address the realistic size and shape of volcanic conduits. The 1969 Mauna Ulu eruption of Kīlauea provides a unique opportunity to document volcanic fissure conduits, thus, we have an ideal location to begin addressing this topic and provide data on these geometries. Exposed fissures can be mapped with robotics using machine vision. In order to test the hypothesis that fissures have irregularities with depth that will influence their fluid dynamical behavior, we must first map the fissure vents and shallow conduit to deci- or centimeter scale. We have designed, constructed, and field-tested the first version of a robotic device that will image an exposed volcanic fissure in three dimensions. The design phase included three steps: 1) create the payload harness and protective shell to prevent damage to the electronics and robot, 2) construct a circuit board to have the electronics communicate with a surface-based computer, and 3) prototype wheel shapes that can handle a variety of volcanic rock textures. The robot's mechanical parts were built using 3d printing, milling, casting and laser cutting techniques, and the electronics were assembled from off the shelf components. The testing phase took place at Mauna Ulu, Kīlauea, Hawai'i, from May 5 - 9, 2014. Many valuable design lessons were learned during the week, and the first ever 3D map from inside a volcanic fissure were successfully collected. Three vents had between 25% and 95% of their internal surfaces imaged. A fourth location, a non-eruptive crack (possibly a fault line) had two transects imaging the textures

Kilauea's Ongoing Eruption: 25th Year Brings Major Changes

NASA Astrophysics Data System (ADS)

Orr, T. R.

2007-12-01

2007 marks the 25th year of nearly continuous eruption on Kilauea's east rift zone. Episodic high lava fountains, which built the Pu`u `O`o cone during the first three years of the eruption, ended in 1986. Activity then migrated downrift and the Kupaianaha shield was formed by passive effusion of lava. The change in eruptive style resulted in a switch at Pu`u `O`o from cone construction to cone collapse that has been ongoing for the last two decades. Activity at Kupaianaha ceased in 1992, and the eruption resumed at Pu`u `O`o. The eruptive style established at Kupaianaha continued, however, with continuous effusion from vents on the southwest flank of the Pu`u `O`o cone. The last 15 years have been characterized by the formation of relatively stable tube systems---broken only by a brief fissure eruption uprift of Pu`u `O`o in 1997---that have carried lava from the flank vents to the ocean about 9 km away. The Prince Kuhio Kalanianaole (PKK) tube, the most recent of these tube systems to develop, was active from March 2004 to June 2007. The PKK flow was emplaced almost entirely on older flows of this eruption and entered the ocean in several locations over a span of 6 km. The "Father's Day" intrusion of June 17--19, 2007, robbed the supply of magma to Pu`u `O`o and, thus, the active flow field. The floor of the Pu`u `O`o crater dropped 80--100 m, the PKK tube system drained, and the active flows and ocean entry quickly stagnated. On June 19, a short-lived fissure eruption broke out low on the east flank of Kane Nui o Hamo, about 6 km uprift of Pu`u `O`o, burying only 0.22 hectares. The eruption at Kilauea paused from June 20 through July 1 or 2, when lava returned to Pu`u `O`o and began refilling the collapsed crater. Near midnight on July 20--21, after at least 19 days of lava lake growth, the lava pond within the Pu`u `O`o crater drained suddenly when a series of fissures opened on the east flank of the cone and propagated ~2 km downrift. The new activity, dubbed

Episode 49 of the Pu'u 'O'o-Kupaianaha eruption of Kilauea volcano - breakdown of a steady-state eruptive era

NASA Astrophysics Data System (ADS)

Mangan, M. T.; Heliker, C. C.; Mattox, T. N.; Kauahikaua, J. P.; Helz, R. T.

1995-04-01

The Pu'u 'O'o-Kupaianaha eruption (1983-present) is the longest lived rift eruption of either Kilauea or neighboring Mauna Loa in recorded history. The initial fissure opening in January 1983 was followed by three years of episodic fire fountaining at the Pu'u 'O'o vent on Kilauea's east rift zone ˜19km from the summit (episodes 4 47). These spectacular events gave way in July 1986 to five and a half years of nearcontinuous, low-level effusion from the Kupaianaha vent, ˜ 3km to the cast (episode 48). A 49th episode began in November 1991 with the opening of a new fissure between Pu'u 'O'o and Kupaianaha. this three week long outburst heralded an era of more erratic eruptive behavior characterized by the shut down of Kupaianaha in February 1992 and subsequent intermittent eruption from vents on the west flank of Pu'u 'O'o (episodes 50 and 51). The events occurring over this period are due to progressive shrinkage of the rift-zone reservoir beneath the eruption site, and had limited impact on eruption temperatures and lava composition.

Episode 49 of the Pu'u 'Ō'ō-Kūpaianaha eruption of Kilauea volcano-breakdown of a steady-state eruptive era

USGS Publications Warehouse

Mangan, M.T.; Heliker, C.C.; Mattox, T.N.; Kauahikaua, J.P.; Helz, R.T.

1995-01-01

The Pu'u 'O'o-Kupaianaha eruption (1983-present) is the longest lived rift eruption of either Kilauea or neighboring Mauna Loa in recorded history. The initial fissure opening in January 1983 was followed by three years of episodic fire fountaining at the Pu'u 'O'o vent on Kilauea's east rift zone ∼19km from the summit (episodes 4–47). These spectacular events gave way in July 1986 to five and a half years of near-continuous, low-level effusion from the Kupaianaha vent, ∼ 3km to the cast (episode 48). A 49th episode began in November 1991 with the opening of a new fissure between Pu'u 'O'o and Kupaianaha. This three week long outburst heralded an era of more erratic eruptive behavior characterized by the shut down of Kupaianaha in February 1992 and subsequent intermittent eruption from vents on the west flank of Pu'u 'O'o (episodes 50 and 51). The events occurring over this period are due to progressive shrinkage of the rift-zone reservoir beneath the eruption site, and had limited impact on eruption temperatures and lava composition.

Clinical evaluation of glass ionomer for pit and fissure sealing of fully erupted molars.

PubMed

Sly, Edith G; Kaplan, Andrea E; Missana, Liliana

2010-01-01

The aim of this study was to evaluate the clinical behavior of two conventional glass ionomers used for pit and fissure sealing in terms of retention, marginal adaptation, caries recurrence and cracking. Eighty-three fully erupted first permanent molars were sealed, in a group of children aged 5 to 8 years. A double-blind, single operator, paired design was used. Materials applied were Fuji IX and VII. Retention (R), presence of caries (PC), marginal discoloration (MD), marginal adaptation (MA) and cracking (C) were evaluated at 6 and 12 months using Ryge's criteria. Data registered 6 months after treatment were: Fuji IX: R: Alpha 37, Bravo 2, Charlie: 4; PC: Alpha 43, Bravo: 0; MA: Alpha 38, Bravo: 1; MD: Alpha 39, Bravo: 0, Charlie: 0; C: Alpha 39, Bravo: 0. Fuji VII: R: Alpha 29, Bravo 4, Charlie: 7; PC: Alpha 40, Bravo: 0; MA: Alpha: 34, Bravo: 0; MD: Alpha: 34, Bravo: 0, Charlie: 0; C: Alpha 33, Bravo: 0. Results after one year were: Fuji IX: R: Alpha 33, Bravo: 3, Charlie: 9; PC: Alpha 44, Bravo: 1; MA: Alpha 33, Bravo: 1; MD: Alpha: 34, Bravo: 0, Charlie: 0; C: Alpha: 34, Bravo: 0. Fuji VII: R: Alpha 22, Bravo 4, Charlie: 13, PC: Alpha 40, Bravo: 0; MA: Alpha 23, Bravo: 1; MD: Alpha 23, Bravo: 1, Charlie: 0; C: Alpha 23, Bravo: 1. Statistical analysis using Fisher test showed no significant difference (p > 0.05) for R, and MA. For PC, MD and C, values are not reported because both materials showed the same results. The second control showed no significant difference (p > 0.05) for R, MA, PC, MD and C. Results suggest no difference between Fuji IX and Fuji VII as sealants in fully erupted permanent molars.

The 1977 eruption of Kilauea volcano, Hawaii

USGS Publications Warehouse

Moore, R.B.; Helz, R.T.; Dzurisin, D.; Eaton, G.P.; Koyanagi, R.Y.; Lipman, P.W.; Lockwood, J.P.; Puniwai, G.S.

1980-01-01

Kilauea volcano began to erupt on September 13, 1977, after a 21.5-month period of quiescence. Harmonic tremor in the upper and central east rift zone and rapid deflation of the summit area occurred for 22 hours before the outbreak of surface activity. On the first night, spatter ramparts formed along a discontinuous, en-echelon, 5.5-km-long fissure system that trends N70??E between two prehistoric cones, Kalalua and Puu Kauka. Activity soon became concentrated at a central vent that erupted sporadically until September 23 and extruded flows that moved a maximum distance of 2.5 km to the east. On September 18, new spatter ramparts began forming west of Kalalua, extending to 7 km the length of the new vent system. A vent near the center of this latest fissure became the locus of sustained fountaining and continued to extrude spatter and short flows intermittently until September 20. The most voluminous phase of the eruption began late on September 25. A discontinuous spatter rampart formed along a 700-m segment near the center of the new, 7-km-long fissure system; within 24 hours activity became concentrated at the east end of this segment. One flow from the 35-m-high cone that formed at this site moved rapidly southeast and eventually reached an area 10 km from the vent and 700 m from the nearest house in the evacuated village of Kalapana. We estimate the total volume of material produced during this 18-day eruption to be 35 ?? 106 m3. Samples from active vents and flows are differentiated quartz-normative tholeiitic basalt, similar in composition to lavas erupted from Kilauea in 1955 and 1962. Plagioclase is the only significant phenocryst; augite, minor olivine, and rare orthopyroxene and opaque oxides accompany it as microphenocrysts. Sulfide globules occur in fresh glass and as inclusions in phenocrysts in early 1977 lavas; their absence in chemically-similar basalt from the later phases of the eruption suggests that more extensive intratelluric degassing

Satellite View of Kilauea Eruption

NASA Image and Video Library

2018-05-07

This image from NASA's Advanced Spaceborne Thermal Emission and Reflection Radiometer (ASTER) instrument on NASA's Terra spacecraft show recent eruptions of Kilauea volcano on the island of Hawaii (the Big Island). Following days of increased seismic activity, Kilauea erupted May 3, 2018, and triggered a number of additional fissure eruptions along the East Rift Zone. The eruptions and high level of sulfur dioxide gas (SO2) prompted evacuations in the area, including the Leilani Estates subdivision near the town of Pahoa. The ASTER images, acquired on May 6, 2018, show different aspects of the eruption. A color composite depicts vegetation in red, and old lava flows in black and gray. Superimposed on the image in yellow are hotspots detected on the thermal infrared bands. The easternmost hot spots show the newly formed fissures and the lava flow spilling to the northwest. The middle spots are Pu'u O'o crater, and lava flows descending the slopes to the southeast. The westernmost area is the crater and lava lake on Kilauea's summit. The greenish area southwest of Pu'u O'o is ash deposits from its short eruption on Friday. The inset shows the massive sulfur dioxide plume is shown in yellow and yellow-green, extracted from ASTER's multiple thermal bands. A smaller, but thicker, sulfur dioxide gas plume can be seen coming from Kilauea. The prevailing trade winds blow the plumes to the southwest, out over the ocean. The images cover an area of 57.8 by 63 kilometers, and are located at 19.3 degrees North, 155.1 degrees West. https://photojournal.jpl.nasa.gov/catalog/PIA22450

Magma chamber deflation recorded by the Global Positioning System - The Hekla 1991 eruption

NASA Astrophysics Data System (ADS)

Sigmundsson, Freysteinn; Einarsson, Pall; Bilham, Roger

1992-07-01

Between January 17 and March 11, 1991, 0.15 cu km of lava erupted initially from several radial fissures and subsequently from a single fissure on the SE flank of Hekla volcano, Iceland. Hekla is surrounded by an array of control points measured in 1989 using GPS geodesy and re-measured after the eruption. These measurements indicate that the eruption was associated with a surface deflation volume of 0.1 + 0.08 - 0.04 centered on Hekla (63.995 deg N +4 -3 km, 19.69 deg W +1.5 -2 km). The depth to the magma reservoir is 9 +6 -7 km, poorly constrained due to the absence of GPS control points close to the volcano.

Are flood basalt eruptions monogenetic or polygenetic?

NASA Astrophysics Data System (ADS)

Sheth, Hetu C.; Cañón-Tapia, Edgardo

2015-11-01

A fundamental classification of volcanoes divides them into "monogenetic" and "polygenetic." We discuss whether flood basalt fields, the largest volcanic provinces, are monogenetic or polygenetic. A polygenetic volcano, whether a shield volcano or a stratovolcano, erupts from the same dominant conduit for millions of years (excepting volumetrically small flank eruptions). A flood basalt province, built from different eruptive fissures dispersed over wide areas, can be considered a polygenetic volcano without any dominant vent. However, in the same characteristic, a flood basalt province resembles a monogenetic volcanic field, with only the difference that individual eruptions in the latter are much smaller. This leads to the question how a flood basalt province can be two very different phenomena at the same time. Individual flood basalt eruptions have previously been considered monogenetic, contrasted by only their high magma output (and lava fluidity) with typical "small-volume monogenetic" volcanoes. Field data from Hawaiian shield volcanoes, Iceland, and the Deccan Traps show that whereas many feeder dykes were single magma injections, and the eruptions can be considered "large monogenetic" eruptions, multiple dykes are equally abundant. They indicate that the same dyke fissure repeatedly transported separate magma batches, feeding an eruption which was thus polygenetic by even the restricted definition (the same magma conduit). This recognition helps in understanding the volcanological, stratigraphic, and geochemical complexity of flood basalts. The need for clear concepts and terminology is, however, strong. We give reasons for replacing "monogenetic volcanic fields" with "diffuse volcanic fields" and for dropping the term "polygenetic" and describing such volcanoes simply and specifically as "shield volcanoes," "stratovolcanoes," and "flood basalt fields."

Tephra productivity and eruption flux of the subglacial Katla volcano, Iceland

NASA Astrophysics Data System (ADS)

Óladóttir, Bergrún Arna; Sigmarsson, Olgeir; Larsen, Guðrún

2018-07-01

The influence of the mode of magma ascent on eruption fluxes is uncertain beneath active volcanoes. To study this, the subglacial volcano Katla, Iceland, whichhas produced abundant tephra through the Holocene, has been investigated through volume estimations of the largest eruptions from the last 3500 years. Tephra volume measurements allow tephra productivity and their variation through time to be estimated. By adding the volume of lava from effusive eruptions, the total eruption flux is obtained. Tephra productivity shows variations with time, ranging from 2.0 km3/century, during the prehistoric period examined, to 0.7 km3/century, during historical time (after 939 CE). However, the average eruption flux remained unchanged ( 2.2 km3/century) during the studied 3500 years due to the large lava produced during the Eldgjá flood basalt eruption (939 CE). Following the Eldgjá event, tephra production declined and also eruption frequency, decreasing from 5.6-2.0 eruptions/century. Magma ascending vertically to the glacier -covered volcano results in explosive phreatomagmatic eruptions and tephra formation, whereas magma transferred in a laterally extended dyke leads to predominant fissural eruptions outside the glacier (e.g., Eldgjá). The mode of magma ascent thus exerts control on the eruption frequency and the volcanic style at Katla volcano without affecting the long-term eruption flux. A uniform increase in cumulative magma volume from Katla suggests a time-integrated steady-state behavior over the last 3500 years. Finally, although the large fissural eruption of Eldgjá lowered the following eruption frequency, it only temporarily affected the time averaged eruption flux of Katla.

Anal Fissure

PubMed Central

Beaty, Jennifer Sam; Shashidharan, M.

2016-01-01

Anal fissure (fissure-in-ano) is a very common anorectal condition. The exact etiology of this condition is debated; however, there is a clear association with elevated internal anal sphincter pressures. Though hard bowel movements are implicated in fissure etiology, they are not universally present in patients with anal fissures. Half of all patients with fissures heal with nonoperative management such as high fiber diet, sitz baths, and pharmacological agents. When nonoperative management fails, surgical treatment with lateral internal sphincterotomy has a high success rate. In this chapter, we will review the symptoms, pathophysiology, and management of anal fissures. PMID:26929749

The largest volcanic eruptions on Earth

NASA Astrophysics Data System (ADS)

Bryan, Scott E.; Peate, Ingrid Ukstins; Peate, David W.; Self, Stephen; Jerram, Dougal A.; Mawby, Michael R.; Marsh, J. S. (Goonie); Miller, Jodie A.

2010-10-01

Large igneous provinces (LIPs) are sites of the most frequently recurring, largest volume basaltic and silicic eruptions in Earth history. These large-volume (> 1000 km 3 dense rock equivalent) and large-magnitude (> M8) eruptions produce areally extensive (10 4-10 5 km 2) basaltic lava flow fields and silicic ignimbrites that are the main building blocks of LIPs. Available information on the largest eruptive units are primarily from the Columbia River and Deccan provinces for the dimensions of flood basalt eruptions, and the Paraná-Etendeka and Afro-Arabian provinces for the silicic ignimbrite eruptions. In addition, three large-volume (675-2000 km 3) silicic lava flows have also been mapped out in the Proterozoic Gawler Range province (Australia), an interpreted LIP remnant. Magma volumes of > 1000 km 3 have also been emplaced as high-level basaltic and rhyolitic sills in LIPs. The data sets indicate comparable eruption magnitudes between the basaltic and silicic eruptions, but due to considerable volumes residing as co-ignimbrite ash deposits, the current volume constraints for the silicic ignimbrite eruptions may be considerably underestimated. Magma composition thus appears to be no barrier to the volume of magma emitted during an individual eruption. Despite this general similarity in magnitude, flood basaltic and silicic eruptions are very different in terms of eruption style, duration, intensity, vent configuration, and emplacement style. Flood basaltic eruptions are dominantly effusive and Hawaiian-Strombolian in style, with magma discharge rates of ~ 10 6-10 8 kg s -1 and eruption durations estimated at years to tens of years that emplace dominantly compound pahoehoe lava flow fields. Effusive and fissural eruptions have also emplaced some large-volume silicic lavas, but discharge rates are unknown, and may be up to an order of magnitude greater than those of flood basalt lava eruptions for emplacement to be on realistic time scales (< 10 years). Most

Volcanic eruptions on Io

NASA Technical Reports Server (NTRS)

Strom, R. G.; Schneider, N. M.; Terrile, R. J.; Hansen, C.; Cook, A. F.

1981-01-01

Nine eruption plumes which were observed during the Voyager 1 encounter with Io are discussed. During the Voyager 2 encounter, four months later, eight of the eruptions were still active although the largest became inactive sometime between the two encounters. Plumes range in height from 60 to over 300 km with corresponding ejection velocities of 0.5 to 1.0 km/s and plume sources are located on several plains and consist of fissures or calderas. The shape and brightness distribution together with the pattern of the surface deposition on a plume 3 is simulated by a ballistic model with a constant ejection velocity of 0.5 km/s and ejection angles which vary from 0-55 deg. The distribution of active and recent eruptions is concentrated in the equatorial regions and indicates that volcanic activity is more frequent and intense in the equatorial regions than in the polar regions. Due to the geologic setting of certain plume sources and large reservoirs of volatiles required for the active eruptions, it is concluded that sulfur volcanism rather than silicate volcanism is the most likely driving mechanism for the eruption plumes.

Setting of the Father's Day Eruption at Kilauea

NASA Astrophysics Data System (ADS)

Swanson, D. A.

2007-12-01

the zone. The Koa`e fault system joins the east rift zone at the curve. The complex structural setting likely affects the frequency of magmatic activity in the segment. All of the eruptive and intrusive activity results in storage of isolated magma bodies. Not surprisingly, petrologists find evidence that summit magma mixes with stored, fractionated magma. The area near Makaopuhi Crater and Kane Nui o Hamo is a particular focus, inferred since the mid-1960s to harbor a shallow magma reservoir. All of the eruptions and intrusions are accompanied by sharp deflation and shallow seismicity at the summit and shallow seismicity and uplift along the intrusion or eruptive fissures. Most often, no seismicity occurs between the summit and the area of intrusion or eruption. Within that area, seismicity commonly migrates downrift but occasionally uprift. Similarly, crack opening generally progresses downrift, with a few exceptions. Cracks generally trend about 65 degrees and can be either left- or right-stepping. Cracks open along azimuths of 155-175, with local exceptions. There is no structural difference between eruptive cracks (fissures) and non- eruptive cracks. Single eruptive fissures rarely exceed 200 m in length, instead stepping within en echelon zones above a presumably linear dike. Since the late 1960s, widening has been measured across the active area during eruptions and intrusions, first by EDM and then by satellite-based systems. The opening is nearly symmetrical within the rift zone, but farther out the north flank barely responds whereas the south flank moves seaward. Available leveling data show uplift on either side of the dike and subsidence along the crest. Examples of deformation in the 1960s and 1970s will be presented, and bibliographic references to past activity will be available.

Postglacial eruptive history of the Western Volcanic Zone, Iceland

NASA Astrophysics Data System (ADS)

Sinton, John; GröNvold, Karl; SæMundsson, KristjáN.

2005-12-01

New field observations, age constraints, and extensive chemical analyses define the complete postglacial eruptive history of the 170-km-long Western Volcanic Zone (WVZ) of Iceland, the ultraslow-spreading western boundary of the south Iceland microplate. We have identified 44 separate eruptive units, 10 of which are small-volume eruptions associated with the flanking Grímsnes system. Overall chemical variations are consistent with very simplified models of melting of a source approximating primitive mantle composition. The 17 eruptions in the first 3000 years of postglacial time account for about 64% of the total postglacial production and are incompatible-element depleted compared to younger units, consistent with enhanced melting as a consequence of rebound immediately following deglaciation. Steadily declining eruption rates for the last 9000 years also correlate with changes in average incompatible element ratios that appear to reflect continued decline in melting extents to the present day. This result is not restricted to the WVZ, however, and may herald a decline in melting throughout all of western Iceland during later postglacial time. Lavas from the northern part of the WVZ are depleted in incompatible elements relative to those farther south at all times, indicating either a long-wavelength gradient in mantle source composition or variations in the melting process along axis. We find no evidence in the postglacial volcanic record for current failure of the WVZ, despite evidence for continued propagation of the eastern margin of the microplate. The dominance of lava shields in the eruptive history of the WVZ contrasts with the higher number of fissure eruptions in other Icelandic volcanic zones. WVZ shields represent long-duration, low-effusion rate eruptions fed by recharge magma arising out of the mantle. Average effusion rate is the key variable distinguishing shield and fissure eruptions, both within the WVZ and between different volcanic zones. High

Volcanism in Iceland in historical time: Volcano types, eruption styles and eruptive history

NASA Astrophysics Data System (ADS)

Thordarson, T.; Larsen, G.

2007-01-01

The large-scale volcanic lineaments in Iceland are an axial zone, which is delineated by the Reykjanes, West and North Volcanic Zones (RVZ, WVZ, NVZ) and the East Volcanic Zone (EVZ), which is growing in length by propagation to the southwest through pre-existing crust. These zones are connected across central Iceland by the Mid-Iceland Belt (MIB). Other volcanically active areas are the two intraplate belts of Öræfajökull (ÖVB) and Snæfellsnes (SVB). The principal structure of the volcanic zones are the 30 volcanic systems, where 12 are comprised of a fissure swarm and a central volcano, 7 of a central volcano, 9 of a fissure swarm and a central domain, and 2 are typified by a central domain alone. Volcanism in Iceland is unusually diverse for an oceanic island because of special geological and climatological circumstances. It features nearly all volcano types and eruption styles known on Earth. The first order grouping of volcanoes is in accordance with recurrence of eruptions on the same vent system and is divided into central volcanoes (polygenetic) and basalt volcanoes (monogenetic). The basalt volcanoes are categorized further in accordance with vent geometry (circular or linear), type of vent accumulation, characteristic style of eruption and volcanic environment (i.e. subaerial, subglacial, submarine). Eruptions are broadly grouped into effusive eruptions where >95% of the erupted magma is lava, explosive eruptions if >95% of the erupted magma is tephra (volume calculated as dense rock equivalent, DRE), and mixed eruptions if the ratio of lava to tephra occupy the range in between these two end-members. Although basaltic volcanism dominates, the activity in historical time (i.e. last 11 centuries) features expulsion of basalt, andesite, dacite and rhyolite magmas that have produced effusive eruptions of Hawaiian and flood lava magnitudes, mixed eruptions featuring phases of Strombolian to Plinian intensities, and explosive phreatomagmatic and magmatic

Tracking the hidden growth of a lava flow field: the 2014-15 eruption of Fogo volcano (Cape Verde)

NASA Astrophysics Data System (ADS)

Silva, Sonia; Calvari, Sonia; Hernandez, Pedro; Perez, Nemesio; Ganci, Gaetana; Alfama, Vera; Barrancos, José; Cabral, Jeremias; Cardoso, Nadir; Dionis, Samara; Fernandes, Paulo; Melian, Gladys; Pereira, José; Semedo, Hélio; Padilla, German; Rodriguez, Fatima

2017-04-01

Fogo volcano erupted in 2014-15 producing an extensive lava flow field in the summit caldera that destroyed two villages, Portela and Bangaeira. The eruption started with powerful explosive activity, lava fountaining, and a substantial ash column accompanying the opening of an eruptive fissure. Lava flows spreading from the base of the eruptive fissure produced three arterial lava flows, spreading S (Flow 1), N-NW (Flow 2) and W (Flow 3). By a week after the start of the eruption, a master lava tube had already developed within the eruptive fissure and along Flow 2. When Flow 2 front stopped against the N caldera cliff, the whole flow field behind it inflated, and eventually its partial drainage produced a short tube that fed Flow 3, but no lava tube formed within Flow 1. Here we analyze the emplacement processes on the basis of observations carried out directly on the lava flow field and through satellite image, in order to unravel the key factors leading to the development of lava tubes. These tubes were responsible for the rapid expansion of lava for the 7.9 km length of the flow field, as well as the destruction of the Portela and Bangaeira villages. Comparing time-averaged effusion rates (TADR) obtained from satellite and Supply Rate (SR) derived from SO2 flux data, we estimate the amount and timing of the lava flow field endogenous growth, with the aim of developing a tool that could be used for risk mitigation at this and other volcanoes.

Depth of origin of magma in eruptions.

PubMed

Becerril, Laura; Galindo, Ines; Gudmundsson, Agust; Morales, Jose Maria

2013-09-26

Many volcanic hazard factors--such as the likelihood and duration of an eruption, the eruption style, and the probability of its triggering large landslides or caldera collapses--relate to the depth of the magma source. Yet, the magma source depths are commonly poorly known, even in frequently erupting volcanoes such as Hekla in Iceland and Etna in Italy. Here we show how the length-thickness ratios of feeder dykes can be used to estimate the depth to the source magma chamber. Using this method, accurately measured volcanic fissures/feeder-dykes in El Hierro (Canary Islands) indicate a source depth of 11-15 km, which coincides with the main cloud of earthquake foci surrounding the magma chamber associated with the 2011-2012 eruption of El Hierro. The method can be used on widely available GPS and InSAR data to calculate the depths to the source magma chambers of active volcanoes worldwide.

Depth of origin of magma in eruptions

PubMed Central

Becerril, Laura; Galindo, Ines; Gudmundsson, Agust; Morales, Jose Maria

2013-01-01

Many volcanic hazard factors - such as the likelihood and duration of an eruption, the eruption style, and the probability of its triggering large landslides or caldera collapses - relate to the depth of the magma source. Yet, the magma source depths are commonly poorly known, even in frequently erupting volcanoes such as Hekla in Iceland and Etna in Italy. Here we show how the length-thickness ratios of feeder dykes can be used to estimate the depth to the source magma chamber. Using this method, accurately measured volcanic fissures/feeder-dykes in El Hierro (Canary Islands) indicate a source depth of 11–15 km, which coincides with the main cloud of earthquake foci surrounding the magma chamber associated with the 2011–2012 eruption of El Hierro. The method can be used on widely available GPS and InSAR data to calculate the depths to the source magma chambers of active volcanoes worldwide. PMID:24067336

Ash from Kilauea Eruption Viewed by NASA's MISR

NASA Image and Video Library

2018-05-09

On May 3, 2018, a new eruption began at a fissure of the Kilauea volcano on the Island of Hawaii. Kilauea is the most active volcano in the world, having erupted almost continuously since 1983. Advancing lava and dangerous sulfur dioxide gas have forced thousands of residents in the neighborhood of Leilani Estates to evacuate. A number of homes have been destroyed, and no one can say how soon the eruption will abate and evacuees can return home. On May 6, 2018, at approximately 11 a.m. local time, the Multi-angle Imaging SpectroRadiometer (MISR) instrument on NASA's Terra satellite captured this view of the island as it passed overhead. Much of the island was shrouded by clouds, including the fissure on its eastern point. However, an eruption plume is visible streaming southwest over the ocean. The MISR instrument is unique in that it has nine cameras that view Earth at different angles: one pointing downward, four at various angles in the forward direction, and four in the backward direction. This image shows the view from one of MISR's forward-pointing cameras (60 degrees), which shows the plume more distinctly than the near-vertical views. The information from the images acquired at different view angles is used to calculate the height of the plume, results of which are superimposed on the right-hand image. The top of the plume near the fissure is at approximately 6,500 feet (2,000 meters) altitude, and the height of the plume decreases as it travels south and west. These relatively low altitudes mean that the ash and sulfur dioxide remained near the ground, which can cause health issues for people on the island downwind of the eruption. The "Ocean View" air quality monitor operated by the Clean Air Branch of the State of Hawaii Department of Health recorded a concentration of 18 μg/m3 of airborne particles less than 2.5 micrometers in diameter at 11 a.m. local time. This amount corresponds to an air quality rating of "moderate" and supports the MISR results

Eruption of Eyjafjallajökull Volcano, Iceland

NASA Image and Video Library

2010-03-27

NASA Image acquired March 24, 2010 To learn more and to download a high res version of this image go here: earthobservatory.nasa.gov/IOTD/view.php?id=43252 Iceland’s Eyjafjallajökull Volcano burst into life for the first time in 190 years on March 20, 2010. A 500-meter- (2,000-foot) long fissure opened in the Fimmvörduháls pass to the west of the ice-covered summit of Eyjafjallajökull. Lava fountains erupted fluid magma, which quickly built several hills of bubble-filled lava rocks (scoria) along the vent. A lava flow spread northeast, spilling into Hrunagil Gully. This natural-color satellite image shows lava fountains, lava flows, a volcanic plume, and steam from vaporized snow. The image was acquired on March 24, 2010, by the Advanced Land Imager (ALI) aboard NASA’s Earth Observing-1 (EO-1) satellite. The lava fountains are orange-red, barely visible at the 10-meter (33-foot) resolution of the satellite. The scoria cones surrounding the fissure are black, as is the lava flow extending to the northeast. White volcanic gases escape from the vent and erupting lava, while a steam plume rises where the hot lava meets snow. (The bright green color along the edge of the lava flow is an artifact of the sensor.) The eruption of Eyjafjallajökull was presaged by a series of earthquakes starting in early March. Over time, the earthquakes rose towards the surface, and land near the volcano rose at least 40 millimeters (2 inches)—both indications that magma was moving underneath the volcano. The eruption continued through at least March 26th, and may continue for several more months. Previous eruptions in the area have caused flooding due to the melting of glacial ice (a Jökulhlaup), but the current eruption is in an area covered by winter snow, not permanent ice. Although some past eruptions of Eyjafjallajökull were followed by larger, explosive eruptions at nearby Katla Volcano, there is currently no sign of activity at Katla. NASA image by Robert Simmon, using

Quantifying Sulphur Emissions and Atmospheric Aerosol Loading From the 1730-36 Lanzarote Eruption

NASA Astrophysics Data System (ADS)

Sharma, K.; Blake, S.; Self, S.

2005-12-01

The AD 1730-36 eruption of Lanzarote (Canary Islands) is the third largest basaltic fissure eruption known to have occurred in the last 1000 years, after the Icelandic events of Laki (AD 1783-84) and Eldgja (AD 934). Our new volume estimates suggest that the Lanzarote eruption produced ~6 km3 of alkali basalt magma along a 15-km long, E-W trending fissure. Eruptive activity occurred in five distinct phases. Each phase began with Strombolian fire fountain activity, building large spatter and scoria cones. This was accompanied and followed by effusive aa and pahoehoe lava flow emplacement. As studies in Iceland have shown, this type of sustained fissure eruption can release large amounts of SO2 to the upper atmosphere, leading to the formation of sulphate aerosol clouds and causing widespread environmental damage and human suffering. Matrix glasses in scoria and surface lava samples have 80-300 ppm S (EMPA) and 300-600 ppm H2O (FTIR), whereas glass inclusions in olivine have 420-2650 ppm S and 1000-5000 ppm H2O. Low sulphur inclusions are believed to be partially degassed, representing melt that was trapped during degassing-induced crystallization that occurred as a result of shallow decompression. The inclusions with the highest sulphur contents trap the original un-degassed melt, as indicated by their consistent S/K2O ratio (0.22). The high sulphur contents are also consistent with our finding, from olivine-spinel equilibria, that the magma was relatively oxidized (log fO2 -4.8) therefore favouring the formation of sulphate species and preventing sulphide saturation. Our glass analyses indicate that 40 Mt of SO2 was injected into the upper troposphere - lower stratosphere via 12-16-km-high eruption plumes and that over half this amount was released during the first year of activity. This figure correlates with published Greenland ice-core (GISP-2) data that shows an acidity spike in 1731, suggesting stratospheric transport of sulphate aerosol to the North during

The character of long-term eruptions: Inferences from episodes 50-53 of the Pu'u 'Ō'ō-Kūpaianaha eruption of Kīlauea volcano

USGS Publications Warehouse

Heliker, C.C.; Mangan, M.T.; Mattox, T.N.; Kauahikaua, J.P.; Helz, R.T.

1998-01-01

The Pu'u 'Ō'ō-Kūpaianaha eruption on the east rift zone of Kīlauea began in January 1983. The first 9 years of the eruption were divided between the Pu'u 'Ō'ō (1983–1986) and Kūpaianaha (1986–1992) vents, each characterized by regular, predictable patterns of activity that endured for years. In 1990 a series of pauses in the activity disturbed the equilibrium of the eruption, and in 1991, the output from Kūpaianaha steadily declined and a short-lived fissure eruption broke out between Kūpaianaha and Pu'u 'Ō'ō. In February 1992 the Kūpaianaha vent died, and, 10 days later, eruptive episode 50 began as a fissure opened on the uprift flank of the Pu'u 'Ō'ō cone. For the next year, the eruption was marked by instability as more vents opened on the flank of the cone and the activity was repeatedly interrupted by brief pauses in magma supply to the vents. Episodes 50–53 constructed a lava shield 60 m high and 1.3 km in diameter against the steep slope of the Pu'u 'Ō'ō cone. By 1993 the shield was pockmarked by collapse pits as vents and lava tubes downcut as much as 29 m through the thick deposit of scoria and spatter that veneered the cone. As the vents progressively lowered, the level of the Pu'u 'Ō'ō pond also dropped, demonstrating the hydraulic connection between the two. The downcutting helped to undermine the prominent Pu'u 'Ō'ō cone, which has diminished in size both by collapse, as a large pit crater formed over the conduit, and by burial of its flanks. Intervals of eruptive instability, such as that of 1991–1993, accelerate lateral expansion of the subaerial flow field both by producing widely spaced vents and by promoting surface flow activity as lava tubes collapse and become blocked during pauses.

Introduction to the 2012-2013 Tolbachik eruption special issue

NASA Astrophysics Data System (ADS)

Edwards, Benjamin R.; Belousov, Alexander; Belousova, Marina; Volynets, Anna

2015-12-01

The Tolbachik volcanic complex in central Kamchatka holds a special place in global volcanological studies. It is one of 4 areas of extensive historic volcanic activity in the northern part of the Central Kamchatka Depression (the others being Klyuchevskoy, Bezymianny, Shiveluch), and is part of the Klyuchevskoy volcanic group, which is one of the most active areas of volcanism on Earth. Tolbachik is especially well-known due largely to the massive 1975-1976 eruption that became known as the Great Tolbachik Fissure eruption (GTFE; Fedotov, 1983; Fedotov et al., 1984). This was one of the first eruptions in Russia to be predicted based on precursory seismic activity, based on M5 earthquakes approximately one week before the eruption started, and was intensively studied during its course by a large number of Russian scientists. A summary of those studies was published, first in Russian and then in English, and it became widely read for many reasons. One in particular is that the eruption was somewhat unusual for a subduction zone setting; although many subduction zone stratovolcanoes have associated basaltic tephra cone-lava fields, this was the first such Hawaiian-style eruption to be widely observed. After the end of the eruption in 1976, the complex showed no signs of activity until 27 November 2012, when increased seismic activity was registered by the Kamchatka Branch of the Russian Geophysical Survey and a red glow from the eruption site was first noticed through the snowstorm haze. This prompted them, and then the Kamchatka Volcanic Emergency Response Team (KVERT) to issue an alert that activity was coming from the south flank of Plosky Tolbachik volcano, the younger of two volcanic edifices (the older is Ostry Tolbachik) that together make up the bulk of the complex along with tephra cone-lava fields that lie along a NE-SW fissure zone that transects Plosky Tolbachik. The new eruption lasted for more than 250 days and, like the 1975-1976 eruption, was

Thoracoscopic anterior ‘fissure first’ technique for left lung cancer with an incomplete fissure

PubMed Central

Samejima, Joji; Matsuura, Yosuke; Nakao, Masayuki; Uehara, Hirofumi; Nakagawa, Ken; Masuda, Munetaka; Okumura, Sakae

2016-01-01

Background Dealing with incomplete lung fissures during thoracoscopic surgery is difficult. Our objective was to evaluate the efficacy and safety of a thoracoscopic anterior ‘fissure first’ technique for dealing with incomplete left lung fissures. Methods One hundred and seventy patients underwent left upper lobectomy or left lower lobectomy between April 2008 and July 2014. Of these, 34 patients underwent surgery using a thoracoscopic anterior ‘fissure first’ technique for incomplete fissures (group A) and 136 underwent surgery using a conventional thoracoscopic method for unfused fissures (group B). A four-port complete thoracoscopic approach was used in all patients. After completion of the fissure, hilar lymphadenectomy was performed in the conventional manner. Results There were no significant differences between the two groups in operating time, blood loss, or duration of chest tube drainage. Patients in group A required more staple cartridges than those in group B (mean number of cartridges, 2.4 vs. 1.1; P<0.01). The two groups did not significantly differ with regard to the prevalence of air leaks (12% vs. 4%; P=0.11), either prolonged or delayed. Conclusions We found that a thoracoscopic anterior ‘fissure first’ technique for left lung cancer with an incomplete fissure enabled hilar lymphadenectomy to be performed in the conventional manner without any increase in the prevalence of air leaks, operating time, or duration of chest tube drainage. This technique should be considered for use in left upper lobectomy or left lower lobectomy in patients with an incomplete fissure. PMID:28066589

January 30, 1997 eruptive event on Kilauea Volcano, Hawaii, as monitored by continuous GPS

USGS Publications Warehouse

Owen, S.; Segall, P.; Lisowski, M.; Miklius, Asta; Murray, M.; Bevis, M.; Foster, J.

2000-01-01

A continuous Global Positioning System (GPS) network on Kilauea Volcano captured the most recent fissure eruption in Kilauea's East Rift Zone (ERZ) in unprecedented spatial and temporal detail. The short eruption drained the lava pond at Pu'u O' o, leading to a two month long pause in its on-going eruption. Models of the GPS data indicate that the intrusion's bottom edge extended to only 2.4 km. Continuous GPS data reveal rift opening 8 hours prior to the eruption. Absence of precursory summit inflation rules out magma storage overpressurization as the eruption's cause. We infer that stresses in the shallow rift created by the continued deep rift dilation and slip on the south flank decollement caused the rift intrusion.

SURFACE FISSURE FORMATION ABOVE UNDERGROUND COALSEAM FIRES: DIMENSIONLESS RELATIONSHIPS BETWEEN SURFACE FISSURES AND SUBSURFACE SUBSIDENCE

NASA Astrophysics Data System (ADS)

Ide, T. S.; Pollard, D. D.; Orr, F. M.

2009-12-01

Coalbed fires are uncontrolled subsurface fires that occur around the world. These fires are believed to be significant contributors to annual CO2 emissions. Although many of these fires have been burning for decades, researchers have only recently begun to investigate physical mechanisms that control fire behavior. One aspect that is poorly characterized is the relationship between subsurface combustion and surface fissures. At the surface above many fires, long, wide fissures are observed. At a coalbed fire near Durango, Colorado, these fissures form systematic orthogonal patterns that align with regional joints in the Upper Cretaceous Fruitland Formation. Understanding the mechanisms that form and widen these fissures is important, as the fissures are believed to play vital roles in sustaining the combustion in the subsurface by acting as chimneys for the escaping gases and conduits for incoming oxygen. In some of the coalbed fire simulation models available today, these fissures are treated as fixed boundary conditions, but we argue, using field observations and simulation results, that there exists a relationship between the location and magnitude of subsidence caused by the fire and the opening of fissures. Four distinct types of fissures are observed over the coalbed fire near Durango, CO. These fissures are termed ‘molehill’, ‘plateau’, ‘gaping’, and ‘narrow’ based on their surface appearances. Molehill fissures are marked by surface depressions on either side, causing the strata around the opening to form an apex towards the center of the fissure. Plateau fissures show a steep vertical offset on only one side with minimal horizontal displacement. Gaping fissures and narrow fissures are predominantly opening with little evidence for vertical displacements. Gaping fissures are defined as fissures with wide apertures (0.3 ~ 1.5m), while narrow fissures have apertures on the order of centimeters. A boundary element method code was used to show

The post-Mazama northwest rift zone eruption at Newberry Volcano, Oregon

USGS Publications Warehouse

McKay, Daniele; Donnelly-Nolan, Julie M.; Jensen, Robert A.; Champion, Duane E.

2009-01-01

The northwest rift zone (NWRZ) eruption took place at Newberry Volcano ~7000 years ago after the volcano was mantled by tephra from the catastrophic eruption that destroyed Mount Mazama and produced the Crater Lake caldera. The NWRZ eruption produced multiple lava flows from a variety of vents including cinder cones, spatter vents, and fissures, possibly in more than one episode. Eruptive behaviors ranged from energetic Strombolian, which produced significant tephra plumes, to low-energy Hawaiian-style. This paper summarizes and in part reinterprets what is known about the eruption and presents information from new and ongoing studies. Total distance spanned by the eruption is 32 km north-south. The northernmost flow of the NWRZ blocked the Deschutes River upstream from the city of Bend, Oregon, and changed the course of the river. Renewed mafic activity in the region, particularly eruptions such as the NWRZ with tephra plumes and multiple lava flows from many vents, would have significant impacts for the residents of Bend and other central Oregon communities.

Pulmonary Lobe Segmentation with Probabilistic Segmentation of the Fissures and a Groupwise Fissure Prior

PubMed Central

Bragman, Felix J.S.; McClelland, Jamie R.; Jacob, Joseph; Hurst, John R.; Hawkes, David J.

2017-01-01

A fully automated, unsupervised lobe segmentation algorithm is presented based on a probabilistic segmentation of the fissures and the simultaneous construction of a population model of the fissures. A two-class probabilistic segmentation segments the lung into candidate fissure voxels and the surrounding parenchyma. This was combined with anatomical information and a groupwise fissure prior to drive non-parametric surface fitting to obtain the final segmentation. The performance of our fissure segmentation was validated on 30 patients from the COPDGene cohort, achieving a high median F1-score of 0.90 and showed general insensitivity to filter parameters. We evaluated our lobe segmentation algorithm on the LOLA11 dataset, which contains 55 cases at varying levels of pathology. We achieved the highest score of 0.884 of the automated algorithms. Our method was further tested quantitatively and qualitatively on 80 patients from the COPDGene study at varying levels of functional impairment. Accurate segmentation of the lobes is shown at various degrees of fissure incompleteness for 96% of all cases. We also show the utility of including a groupwise prior in segmenting the lobes in regions of grossly incomplete fissures. PMID:28436850

Pre-eruptive volatile and erupted gas phase characterization of the 2014 basalt of Bárðarbunga volcanic system, Iceland.

NASA Astrophysics Data System (ADS)

Haddadi, Baptiste; Moune, Séverine; Sigmarsson, Olgeir; Gauthier, Pierre-Jean; Gouhier, Mathieu

2015-04-01

The 2014 Holuhraun eruption on the Bárðarbunga Volcanic System is the largest fissure eruption in Iceland since the 1783 Laki eruption. The eruption started end of August 2014 and has been characterized by large emission of SO2 into the atmosphere. It provides a rare opportunity to study in details magmatic and degassing processes during a large-volume fissure eruption. In order to characterize the pre-eruptive magmatic composition and to assess the plume chemistry at the eruption site, lava and tephra were sampled together with the eruption plume. The basalt composition is olivine tholeiite with MgO close to 7 wt%. It is phenocryst-poor with plagioclase as the dominant mineral phase but olivine and clinopyroxene are also present together with sulphide globules composed principally of pyrite and chalcopyrite. The volatile (S, Cl and F) and major element concentrations were measured by the electron microprobe in melt inclusions (MIs) trapped in plagioclase and clinopyroxene and groundmass glass. The MIs composition ranges from fairly primitive basaltic compositions (MgO: 9.03 wt%) down to evolved qz-tholeiites (MgO: 5.57 wt%), with estimated pre-eruptive S concentrations of 1500 ppm. Tephra groundmass glass contains 400 ppm S, whereas Cl and F concentrations are respectively slightly lower and indistinguishable from those in the MIs. This implies limited exsolution of halogens but 75% of the initial sulphur content. Relatively to their total iron content, MIs are sulphur saturated, and their oxygen fugacity close to the FMQ buffer. The difference between the estimated initial volatile concentrations measured in the MIs and in the tephra groundmass (i.e. the so-called petrological method) yields 7.2 Mt SO2, limited HCl and no HF atmospheric mass loading from the Holuhraun 2014 eruption. The SO2/HCl molar ratio of the gas phase, calculated from the MIs, is 13 and 14, respectively, using average and estimated pre-eruptive S and Cl concentrations in the MIs. Filter

Stress-induced comenditic trachyte effusion triggered by trachybasalt intrusion: multidisciplinary study of the AD 1761 eruption at Terceira Island (Azores)

NASA Astrophysics Data System (ADS)

Pimentel, A.; Zanon, V.; de Groot, L. V.; Hipólito, A.; Di Chiara, A.; Self, S.

2016-03-01

The AD 1761 eruption on Terceira was the only historical subaerial event on the island and one of the last recorded in the Azores. The eruption occurred along the fissure zone that crosses the island and produced a trachybasalt lava flow and scoria cones. Small comenditic trachyte lava domes (known as Mistérios Negros) were also thought by some to have formed simultaneously on the eastern flank of Santa Bárbara Volcano. Following a multidisciplinary approach, we combined geological mapping, paleomagnetic, petrographic, mineral and whole-rock geochemical and structural analyses to study this eruption. The paleomagnetic dating method compared geomagnetic vectors (directions and intensities) recorded by both the AD 1761 lava flow and Mistérios Negros domes and revealed that the two events were indeed coeval. Based on new data and interpretation of historical records, we have accordingly reconstructed the AD 1761 eruptive dynamics and distinguished three phases: (1) a precursory phase characterized by decreased degassing in the fumarolic field of Pico Alto Volcano and a gradual increase of seismic activity, which marked the intrusion of trachybasalt magma; (2) a first eruptive phase that started with phreatic explosions on the eastern flank of Santa Bárbara Volcano, followed by the inconspicuous effusion of comenditic trachyte (66 wt% SiO2), forming a WNW-ESE-oriented chain of lava domes; and (3) a second eruptive phase on the central part of the fissure zone, where a Hawaiian to Strombolian-style eruption formed small scoria cones (E-W to ENE-WSW-oriented) and a trachybasalt lava flow (50 wt% SiO2) which buried 27 houses in Biscoitos village. Petrological analyses show that the two batches of magma were emitted independently without evidence of interaction. We envisage that the dome-forming event was triggered by local stress changes induced by intrusion of the trachybasalt dyke along the fissure zone, which created tensile stress conditions that promoted ascent

Volcanic eruptions on mid-ocean ridges: New evidence from the superfast spreading East Pacific Rise, 17°-19°S

NASA Astrophysics Data System (ADS)

Sinton, John; Bergmanis, Eric; Rubin, Ken; Batiza, Rodey; Gregg, Tracy K. P.; Grönvold, Karl; Macdonald, Ken C.; White, Scott M.

2002-06-01

Side-scan sonar, submersible observations and sampling of lava flows from the East Pacific Rise, 17°-19°S constrain the character and variability of submarine volcanic eruptions along mid-ocean ridges. Nine separate lava sequences were mapped using relative age and lithological contrasts among recovered samples. Axial lengths activated during eruptive episodes range from ~1 to >18 km; individual flow field areas vary from <1 to >19 km2. Estimated erupted volumes range from <1 to >200 × 106 m3. The largest unit is the chemically uniform Animal Farm lava near 18°37'S. The youngest lava is the Aldo-Kihi flow field, 17°24'-34'S, probably erupted in the early 1990s from a fissure system extending >18 km along axis. Near 18°33'S two distinct lava compositions with uniform sediment cover were recovered from lava that buries older faulted terrain. The boundary in lava composition coincides with a change in depth to the top of an axial magma lens seismic reflector, consistent with magmas from two separate reservoirs being erupted in the same event. Chemical compositions from throughout the area indicate that lavas with identical compositions can be emplaced in separate volcanic eruptions within individual segments. A comparison of our results to global data on submarine mid-ocean ridge eruptions suggests consistent dependencies of erupted volume, activated fissure lengths, and chemical heterogeneity with spreading rate, consistent with expected eruptive characteristics from ridges with contrasting thermal properties and magma reservoir depths.

Trends in intrusive and eruptive activity during Kilauea's long-lived east rift zone eruption

NASA Astrophysics Data System (ADS)

Orr, T. R.; Patrick, M. R.; Heliker, C.

2011-12-01

Kilauea Volcano's Pu`u `O`o eruption, continuing for nearly three decades, offers a unique opportunity to study trends in eruptive behavior. One such trend, that of uprift intrusion ± eruption, accompanied by crater floor collapse and eruptive hiatus, has been repeated several times at Pu`u `O`o. This includes the February 7, 1993, intrusion; the January 29, 1997, intrusion and eruption; the September 12, 1999, intrusion; and the June 17, 2007, intrusion and eruption. Activity resumed within Pu`u `O`o following each of these events, and crater refilling culminated eventually in the outbreak of lava from new vents on the flank of the Pu`u `O`o cone. The pattern was repeated again in 2011, when a brief fissure eruption uprift from Pu`u `O`o started on March 5. The Pu`u `O`o crater floor dropped about 115 m in response to the eruption, which ceased on March 9. After a short hiatus, lava reappeared in Pu`u `O`o on March 26, and the crater began to fill slowly thereafter by overflow from a central lava lake. Starting in late June 2011, however, the crater floor began to uplift in a wholesale fashion, suggesting an increase in the pressure beneath the Pu`u `O`o edifice. By late July, the lava within the crater had reached its highest level since early 2004, and lava had begun to overflow from the southwestern side of the crater. On August 3, the west side of the Pu`u `O`o cone was abruptly thrust upward as a sill was injected beneath that portion of the cone. Within minutes, lava began to erupt from a crack on the west flank of Pu`u `O`o, completing the pattern of intrusion, crater collapse, refilling, and breakout. During a long-lived eruption, maintaining a detailed observational and geophysical record is essential for recognizing patterns that may emerge. Recognizing such a pattern allowed Hawaiian Volcano Observatory scientists to prepare a response well in advance of the August 3, 2011 event, and provides guidance for responding to future eruption crises at Pu`u `O

Pyroclastic deposits of the Mount Edgecumbe volcanic field, southeast Alaska: eruptions of a stratified magma chamber

USGS Publications Warehouse

Riehle, J.R.; Champion, D.E.; Brew, D.A.; Lanphere, M.A.

1992-01-01

The Mount Edgecumbe volcanic field in southeastern Alaska consists of 5-6 km3 (DRE) of postglacial pyroclasts that overlie Pleistocene lavas. All eleven pyroclast vents align with the long axis of the field, implying that the pyroclast magma conduits followed a crustal fissure. Most of these vents had previously erupted lavas that are compositionally similar to the pyroclasts, so a persistent magma system (chamber) had likely evolved by the onset of the pyroclastic eruptions. The pyroclastic sequence was deposited in about a millennium and is remarkable for a wide range of upward-increasing silica contents (51-72% SiO2), which is consistent with rise of coexisting magmas at different rates governed by their viscosity. Basaltic and andesitic lava flows have erupted throughout the lifetime of the field. Rhyolite erupted late; we infer that it formed early but was hindered from rising by its high viscosity. Most of the magmas-and all siliceous ones-erupted from vents on the central fissure. Basalt has not erupted from the center of the field during at least the latter part of its lifetime. Thus the field may illustrate basalt underplating: heat and mass flux are concentrated at the center of a stratified magma chamber in which a cap of siliceous melt blocks the rise of basalt. Major-element, strontium isotope, and mineral compositions of unaltered pyroclasts are broadly similar to those of older lavas of similar SiO2 content. Slightly fewer phenocrysts, inherited grains, and trace amphibole in pyroclastic magmas may be due simply to faster rise and less undercooling and degassing before eruption relative to the lavas. Dacite occurs only in the youngest deposits; the magma formed by mixing of andesitic and rhyolitic magmas erupted shortly before by the dacitic vents. ?? 1992.

Cyclic flank-vent and central-vent eruption patterns

NASA Astrophysics Data System (ADS)

Takada, Akira

Many basaltic and andesitic polygenetic volcanoes have cyclic eruptive activity that alternates between a phase dominated by flank eruptions and a phase dominated by eruptions from a central vent. This paper proposes the use of time-series diagrams of eruption sites on each polygenetic volcano and intrusion distances of dikes to evaluate volcano growth, to qualitatively reconstruct the stress history within the volcano, and to predict the next eruption site. In these diagrams the position of an eruption site is represented by the distance from the center of the volcano and the clockwise azimuth from north. Time-series diagrams of Mauna Loa, Kilauea, Kliuchevskoi, Etna, Sakurajima, Fuji, Izu-Oshima, and Hekla volcanoes indicate that fissure eruption sites of these volcanoes migrated toward the center of the volcano linearly, radially, or spirally with damped oscillation, occasionally forming a hierarchy in convergence-related features. At Krafla, terminations of dikes also migrated toward the center of the volcano with time. Eruption sites of Piton de la Fournaise did not converge but oscillated around the center. After the convergence of eruption sites with time, the central eruption phase is started. The intrusion sequence of dikes is modeled, applying crack interaction theory. Variation in convergence patterns is governed by the regional stress and the magma supply. Under the condition that a balance between regional extension and magma supply is maintained, the central vent convergence time during the flank eruption phase is 1-10 years, whereas the flank vent recurrence time during the central eruption phase is greater than 100 years owing to an inferred decrease in magma supply. Under the condition that magma supply prevails over regional extension, the central vent convergence time increases, whereas the flank vent recurrence time decreases owing to inferred stress relaxation. Earthquakes of M>=6 near a volcano during the flank eruption phase extend the

Gas analyses from the Pu'u O'o eruption in 1985, Kilauea volcano, Hawaii

USGS Publications Warehouse

Greenland, L.P.

1986-01-01

Volcanic gas samples were collected from July to November 1985 from a lava pond in the main eruptive conduit of Pu'u O'o from a 2-week-long fissure eruption and from a minor flank eruption of Pu'u O'o. The molecular composition of these gases is consistent with thermodynamic equilibrium at a temperature slightly less than measured lava temperatures. Comparison of these samples with previous gas samples shows that the composition of volatiles in the magma has remained constant over the 3-year course of this episodic east rift eruption of Kilauea volcano. The uniformly carbon depleted nature of these gases is consistent with previous suggestions that all east rift eruptive magmas degas during prior storage in the shallow summit reservoir of Kilauea. Minor compositional variations within these gas collections are attributed to the kinetics of the magma degassing process. ?? 1986 Springer-Verlag.

Magma plumbing for the 2014-2015 Holuhraun eruption, Iceland

NASA Astrophysics Data System (ADS)

Geiger, Harri; Mattsson, Tobias; Deegan, Frances M.; Troll, Valentin R.; Burchardt, Steffi; Gudmundsson, Ólafur; Tryggvason, Ari; Krumbholz, Michael; Harris, Chris

2016-08-01

The 2014-2015 Holuhraun eruption on Iceland was located within the Askja fissure swarm but was accompanied by caldera subsidence in the Bárðarbunga central volcano 45 km to the southwest. Geophysical monitoring of the eruption identified a seismic swarm that migrated from Bárðarbunga to the Holuhraun eruption site over the course of two weeks. In order to better understand this lateral connection between Bárðarbunga and Holuhraun, we present mineral textures and compositions, mineral-melt-equilibrium calculations, whole rock and trace element data, and oxygen isotope ratios for selected Holuhraun samples. The Holuhraun lavas are compositionally similar to recorded historical eruptions from the Bárðarbunga volcanic system but are distinct from the historical eruption products of the nearby Askja system. Thermobarometry calculations indicate a polybaric magma plumbing system for the Holuhraun eruption, wherein clinopyroxene and plagioclase crystallized at average depths of ˜17 km and ˜5 km, respectively. Crystal resorption textures and oxygen isotope variations imply that this multilevel plumbing system facilitated magma mixing and assimilation of low-δ18O Icelandic crust prior to eruption. In conjunction with the existing geophysical evidence for lateral migration, our results support a model of initial vertical magma ascent within the Bárðarbunga plumbing system followed by lateral transport of aggregated magma batches within the upper crust to the Holuhraun eruption site.

Volcano geodesy: The search for magma reservoirs and the formation of eruptive vents

USGS Publications Warehouse

Dvorak, J.J.; Dzurisin, D.

1997-01-01

Routine geodetic measurements are made at only a few dozen of the world's 600 or so active volcanoes, even though these measurements have proven to be a reliable precursor of eruptions. The pattern and rate of surface displacement reveal the depth and rate of pressure increase within shallow magma reservoirs. This process has been demonstrated clearly at Kilauea and Mauna Loa, Hawaii; Long Valley caldera, California; Campi Flegrei caldera, Italy; Rabaul caldera, Papua New Guinea; and Aira caldera and nearby Sakurajima, Japan. Slower and lesser amounts of surface displacement at Yellowstone caldera, Wyoming, are attributed to changes in a hydrothermal system that overlies a crustal magma body. The vertical and horizontal dimensions of eruptive fissures, as well as the amount of widening, have been determined at Kilauea, Hawaii; Etna, Italy; Tolbachik, Kamchatka; Krafla, Iceland; and Asal-Ghoubbet, Djibouti, the last a segment of the East Africa Rift Zone. Continuously recording instruments, such as tiltmeters, extensometers, and dilatometers, have recorded horizontal and upward growth of eruptive fissures, which grew at rates of hundreds of meters per hour, at Kilauea; Izu-Oshima, Japan; Teishi Knoll seamount, Japan; and Piton de la Fournaise, Re??union Island. In addition, such instruments have recorded the hour or less of slight ground movement that preceded small explosive eruptions at Sakurajima and presumed sudden gas emissions at Galeras, Colombia. The use of satellite geodesy, in particular the Global Positioning System, offers the possibility of revealing changes in surface strain both local to a volcano and over a broad region that includes the volcano.

Mechanism of Earth Fissures in Beijing,China

NASA Astrophysics Data System (ADS)

Zhang, Y.; Gong, H.; Gu, Z.; Wang, R.; Jia, S.; Li, X.

2013-12-01

Earth fissure is one of the natural hazards that can occur due to different mechanisms. The Beijing city, located in the north of North China Plain, China, has undergone extensive fissuring for the last twenty years. These fissures have caused serious damages to homes, farmlands and infrastructures. The previous investigation shows the distribution and direction of the major earth fissures mostly paralleled to the active fault, such as Huangzhuang-Gaoliying Fault. Hence, tectonic movements were thought to be the major cause of the fissuring in this region. But the subsidence caused by overdraft and other geological, hydrological and mechanical factors may also play important roles in forming earth fissure. The purpose of the work was to further explores the reason for the cause of the earth fissures and their mechanism of formations using field investigations, geophysical surveys, geotechnical tests and numerical analysis. The results indicated that over-extraction groundwater and differential subsidence are the major causes of the fissuring. The active faulting and fault zone provided or created an ideal condition for stress to accumulate. The earth fissures occur at times when the accumulated stress exceed the strength of soil or coupled with other process by which the strength of soil material is reduced. Survey and simulated results reveal the complex pattern of earth fissure including tensile deformation, vertical offset and rotation. The potential locations for future damage were also evaluated. Keywords: Earth Fissure; Mechanism; Beijing; Subsidence; tectonic movement; Geophysical survey

Strong Constraints on Aerosol-Cloud Interactions from Volcanic Eruptions

NASA Technical Reports Server (NTRS)

Malavelle, Florent F.; Haywood, Jim M.; Jones, Andy; Gettelman, Andrew; Clarisse, Lieven; Bauduin, Sophie; Allan, Richard P.; Karset, Inger Helene H.; Kristjansson, Jon Egill; Oreopoulos, Lazaros;

Strong constraints on aerosol-cloud interactions from volcanic eruptions.

PubMed

Malavelle, Florent F; Haywood, Jim M; Jones, Andy; Gettelman, Andrew; Clarisse, Lieven; Bauduin, Sophie; Allan, Richard P; Karset, Inger Helene H; Kristjánsson, Jón Egill; Oreopoulos, Lazaros; Cho, Nayeong; Lee, Dongmin; Bellouin, Nicolas; Boucher, Olivier; Grosvenor, Daniel P; Carslaw, Ken S; Dhomse, Sandip; Mann, Graham W; Schmidt, Anja; Coe, Hugh; Hartley, Margaret E; Dalvi, Mohit; Hill, Adrian A; Johnson, Ben T; Johnson, Colin E; Knight, Jeff R; O'Connor, Fiona M; Partridge, Daniel G; Stier, Philip; Myhre, Gunnar; Platnick, Steven; Stephens, Graeme L; Takahashi, Hanii; Thordarson, Thorvaldur

2017-06-22

Aerosols have a potentially large effect on climate, particularly through their interactions with clouds, but the magnitude of this effect is highly uncertain. Large volcanic eruptions produce sulfur dioxide, which in turn produces aerosols; these eruptions thus represent a natural experiment through which to quantify aerosol-cloud interactions. Here we show that the massive 2014-2015 fissure eruption in Holuhraun, Iceland, reduced the size of liquid cloud droplets-consistent with expectations-but had no discernible effect on other cloud properties. The reduction in droplet size led to cloud brightening and global-mean radiative forcing of around -0.2 watts per square metre for September to October 2014. Changes in cloud amount or cloud liquid water path, however, were undetectable, indicating that these indirect effects, and cloud systems in general, are well buffered against aerosol changes. This result will reduce uncertainties in future climate projections, because we are now able to reject results from climate models with an excessive liquid-water-path response.

The chemically zoned 1949 eruption on La Palma (Canary Islands): Petrologic evolution and magma supply dynamics of a rift zone eruption

NASA Astrophysics Data System (ADS)

Klügel, Andreas; Hoernle, Kaj A.; Schmincke, Hans-Ulrich; White, James D. L.

2000-03-01

The 1949 rift zone eruption along the Cumbre Vieja ridge on La Palma involved three eruptive centers, 3 km spaced apart, and was chemically and mineralogically zoned. Duraznero crater erupted tephrite for 14 days and shut down upon the opening of Llano del Banco, a fissure that issued first tephrite and, after 3 days, basanite. Hoyo Negro crater opened 4 days later and erupted basanite, tephrite, and phonotephrite, while Llano del Banco continued to issue basanite. The eruption ended with Duraznero erupting basanite with abundant crustal and mantle xenoliths. The tephrites and basanites from Duraznero and Llano del Banco show narrow compositional ranges and define a bimodal suite. Each batch ascended and evolved separately without significant intermixing, as did the Hoyo Negro basanite, which formed at lower degrees of melting. The magmas fractionated clinopyroxene +olivine±kaersutite±Ti-magnetite at 600-800 MPa and possibly 800-1100 MPa. Abundant reversely zoned phenocrysts reflect mixing with evolved melts at mantle depths. Probably as early as 1936, Hoyo Negro basanite entered the deep rift system at 200-350 MPa. Some shallower pockets of this basanite evolved to phonotephrite through differentiation and assimilation of wall rock. A few months prior to eruption, a mixing event in the mantle may have triggered the final ascent of the magmas. Most of the erupted tephrite and basanite ascended from mantle depths within hours to days without prolonged storage in crustal reservoirs. The Cumbre Vieja rift zone differs from the rift zones of Kilauea volcano (Hawaii) in lacking a summit caldera or a summit reservoir feeding the rift system and in being smaller and less active with most of the rift magma solidifying between eruptions.

The initial phases of the 2008-2009 Mount Etna eruption: A multidisciplinary approach for hazard assessment

NASA Astrophysics Data System (ADS)

Bonaccorso, A.; Bonforte, A.; Calvari, S.; Del Negro, C.; di Grazia, G.; Ganci, G.; Neri, M.; Vicari, A.; Boschi, E.

2011-03-01

Between 2007 and early 2008, the Istituto Nazionale di Geofisica e Vulcanologia (INGV) monitoring networks on Etna volcano recorded a recharging phase that climaxed with a new effusive eruption on 13 May 2008 and lasted about 14 months. A dike-forming intrusion was accompanied by a violent seismic swarm, with more than 230 events recorded in the first 6 h, the largest being ML = 3.9. In the meanwhile, marked ground deformation was recorded by the permanent tilt and GPS networks, and sudden changes in the summit area were detected by five continuously recording magnetic stations. Poor weather conditions did not allow direct observation of the eruptive events, but important information was provided by infrared satellite images that detected the start of lava fountains from the eruptive fissure, feeding a lava flow. This flow spread within the Valle del Bove depression, covering 6.4 km on the southeastern flank of the volcano in a few hours. The seismicity and deformation pattern indicated that the dike-forming intrusion was propagating northward. It produced a dry fracture field, which generated concern for the possibility that the eruptive fissures could expand downslope toward populated areas. Monitoring and modeling of the multidisciplinary data, together with the simulations of ash dispersal and lava flows, allowed us both to infer the eruptive mechanisms and to provide correct interpretation of the ongoing phenomena, furnishing useful information for civil defense purposes. We describe how this approach of feedback between monitoring and research provides critical support to risk evaluation.

Syn-eruptive CO2 Degassing of Submarine Lavas Flows: Constraints on Eruption Dynamics

NASA Astrophysics Data System (ADS)

Soule, S. A.; Boulahanis, B.; Fundis, A.; Clague, D. A.; Chadwick, B.

2013-12-01

variability in CO2 supersaturation along eruptive fissures as well as with increasing distance along flows pathways providing constraints on threshold decompression rates required to nucleate and grow bubbles in a basaltic melt, timescales of degassing in natural systems, and the properties of consequent vesicle populations.

The source and longevity of sulfur in an Icelandic flood basalt eruption plume

NASA Astrophysics Data System (ADS)

Ilyinskaya, Evgenia; Edmonds, Marie; Mather, Tamsin; Schmidt, Anja; Hartley, Margaret; Oppenheimer, Clive; Pope, Francis; Donovan, Amy; Sigmarsson, Olgeir; Maclennan, John; Shorttle, Oliver; Francis, Peter; Bergsson, Baldur; Barsotti, Sara; Thordarson, Thorvaldur; Bali, Eniko; Keller, Nicole; Stefansson, Andri

2015-04-01

The Holuhraun fissure eruption (Bárðarbunga volcanic system, central Iceland) has been ongoing since 31 August 2014 and is now the largest in Europe since the 1783-84 Laki event. For the first time in the modern age we have the opportunity to study at first hand the environmental impact of a flood basalt fissure eruption (>1 km3 lava). Flood basalt eruptions are one of the most hazardous volcanic scenarios in Iceland and have had enormous societal and economic consequences across the northern hemisphere in the past. The Laki eruption caused the deaths of >20% of the Icelandic population by environmental pollution and famine and potentially also increased European levels of mortality through air pollution by sulphur-bearing gas and aerosol. A flood basalt eruption was included in the UK National Risk Register in 2012 as one of the highest priority risks. The gas emissions from Holuhraun have been sustained since its beginning, repeatedly causing severe air pollution in populated areas in Iceland. During 18-22 September, SO2 fluxes reached 45 kt/day, a rate of outgassing rarely observed during sustained eruptions, suggesting that the sulfur loading per kg of erupted magma exceeds both that of other recent eruptions in Iceland and perhaps also other historic basaltic eruptions globally. This raises key questions regarding the origin of these prodigious quantities of sulphur. A lack of understanding of the source of this sulfur, the conversion rates of SO2 gas into aerosol, the residence times of aerosol in the plume and the dependence of these on meteorological factors is limiting our confidence in the ability of atmospheric models to forecast gas and aerosol concentrations in the near- and far-field from Icelandic flood basalt eruptions. In 2015 our group is undertaking a project funded by UK NERC urgency scheme to investigate several aspects of the sulfur budget at Holuhraun using a novel and powerful approach involving simultaneous tracking of sulfur and

[Effects of volcanic eruptions on human health in Iceland. Review].

PubMed

Gudmundsson, Gunnar; Larsen, Guðrun

2016-01-01

Volcanic eruptions are common in Iceland and have caused health problems ever since the settlement of Iceland. Here we describe volcanic activity and the effects of volcanic gases and ash on human health in Iceland. Volcanic gases expelled during eruptions can be highly toxic for humans if their concentrations are high, irritating the mucus membranes of the eyes and upper respiratory tract at lower concentrations. They can also be very irritating to the skin. Volcanic ash is also irritating for the mucus membranes of the eyes and upper respiratory tract. The smalles particles of volcanic ash can reach the alveoli of the lungs. Described are four examples of volcanic eruptions that have affected the health of Icelanders. The eruption of Laki volcanic fissure in 1783-1784 is the volcanic eruption that has caused the highest mortality and had the greatest effects on the well-being of Icelanders. Despite multiple volcanic eruptions during the last decades in Iceland mortality has been low and effects on human health have been limited, although studies on longterm effects are lacking. Studies on the effects of the Eyjafjallajökul eruption in 2010 on human health showed increased physical and mental symptoms, especially in those having respiratory disorders. The Directorate of Health in Iceland and other services have responded promptly to recurrent volcanic eruptions over the last few years and given detailed instructions on how to minimize the effects on the public health. Key words: volcanic eruptions, Iceland, volcanic ash, volcanic gases, health effects, mortality. Correspondence: Gunnar Guðmundsson, ggudmund@landspitali.is.

Voluminous eruption from a zoned magma body after an increase in supply rate at Axial Seamount

NASA Astrophysics Data System (ADS)

Chadwick, W. W.; Paduan, J. B.; Clague, D. A.; Dreyer, B. M.; Merle, S. G.; Bobbitt, A. M.; Caress, D. W.; Philip, B. T.; Kelley, D. S.; Nooner, S. L.

2016-12-01

Axial Seamount is the best monitored submarine volcano in the world, providing an exceptional window into the dynamic interactions between magma storage, transport, and eruption processes in a mid-ocean ridge setting. An eruption in April 2015 produced the largest volume of erupted lava since monitoring and mapping began in the mid-1980s after the shortest repose time, due to a recent increase in magma supply. The higher rate of magma replenishment since 2011 resulted in the eruption of the most mafic lava in the last 500-600 years. Eruptive fissures at the volcano summit produced pyroclastic ash that was deposited over an area of at least 8 km2. A systematic spatial distribution of compositions is consistent with a single dike tapping different parts of a thermally and chemically zoned magma reservoir that can be directly related to previous multichannel seismic-imaging results.

The July - August 2014 Mt. Etna eruptions: insights on the magmatic feeding system from geochemical and geophysical data

NASA Astrophysics Data System (ADS)

Zuccarello, Francesco; Cannata, Andrea; Gresta, Stefano; Palano, Mimmo; Viccaro, Marco

2016-04-01

The 2014 volcanic activity of Mt. Etna has been characterized by a marked change in the eruptive behavior with respect to the one that occurred during the 2011-2013 time interval. During the 2011-2013 period, the volcanic activity was characterized by the occurrence of more than 40 vigorous lava fountain episodes at the summit New South-East Crater (hereinafter NSEC). Conversely, from the end of 2013 to the end of 2014, although intense Strombolian and effusive activity took place at NSEC, the volcanic activity never culminated in sustained lava fountaining and voluminous tephra emission. The July - August 2014 eruption can be framed within such a low level of volcanic activity. This eruption started on July 5 2014, when a fissure opened on the lower eastern flank of the summit North-East Crater (hereinafter NEC), close to the fracture field of the 2008-2009 eruption. These fissures fed weak Strombolian activity and minor lava emission from two new vents located at about 3000 m elevation. On July 25, more intense Strombolian activity took place at a further vent opened close to these two vents, at 3090 m elevation. The eruption from the vents on the lower eastern flank of NEC continued until August 9. Before the end of this eruption, on 8 August a new eruptive episode started at NSEC. This last eruption, culminating during August 11-14 with vigorous Strombolian activity and lava effusion, ended on August 16. Moreover, such a contemporaneous activity at both NSEC and NEC lends credit to the existence of a shallow link between the two craters. Taking advantage from the availability of an extensive dataset of geochemical, seismic and geodetic data we have here analyzed the volcanic activity characterizing this eruptive event. This integrated, multidisciplinary study is aimed at improving the knowledge of the deeper and shallower portions of the magmatic feeding system along with the magma transfer mechanisms toward the surface.

The 2009 and 2010 eruptions and shallow intrusions at Piton de la Fournaise, La Réunion Island, seen by cGPS measurements

NASA Astrophysics Data System (ADS)

Staudacher, Thomas; Peltier, Aline; Boissier, Patrice; di Muro, Andrea

2010-05-01

The Piton de la Fournaise volcano at La Réunion Island in the western Indian Ocean is one of the most active volcanoes in the world. Its average eruption rate over the last 2 centuries is one eruption every 9 months. Between 1998 and 2010 thirty eruptions occurred and produced some 300×106 m3 of lava flows. Since the 2007 collapse of 340 m of the Dolomieu caldera, the eruptive activity of the volcano changed with mainly the occurrence of numerous shallow intrusions preceding days or weeks small summit eruptions. In 2009-2010, Piton de la Fournaise erupted successively in November 5, December 14, 2009 and in January 2, 2010. The one day lasting November and December 2009 eruptions started from en echelon fissures close to the summit around its eastern and southern rims, respectively, whereas the January 2010 eruptive fissure opened on the western flank inside of the Dolomieu crater. These three eruptions produced less than 106 m3 of lava, but generated large ground deformation, of up to 70 cm, recorded by the cGPS network of the volcano observatory and by cinematic GPS measurements. The long term survey showed a small extent of the ground deformation field and the small ratios of base/summit displacements and vertical/horizontal displacements reveal the involvement of shallow dykes to fed these successive eruptions. The cGPS network allowed us to follow up precisely the pre eruptive ground deformations, the 40 to 90 minutes dyke propagation toward the surface, as well as the ground deformations after the vent opening. For the November and December 2009 eruptions, the dyke started below the western part of the Dolomieu crater, before propagating to the east and the south, respectively. For the January eruption, the dyke propagated along a more or less vertical pathway directly to the western part of the Dolomieu crater. The two previous dyke injections of November and December had increased the horizontal compressive stress of the eastern side of the Dolomieu

Chronology and volcanology of the 1949 multi-vent rift-zone eruption on La Palma (Canary Islands)

NASA Astrophysics Data System (ADS)

Klügel, A.; Schmincke, H.-U.; White, J. D. L.; Hoernle, K. A.

1999-12-01

The compositionally zoned San Juan eruption on La Palma emanated from three eruptive centers located along a north-south-trending rift zone in the south of the island. Seismic precursors began weakly in 1936 and became strong in March 1949, with their foci progressing from the north of the rift zone towards its south. This suggests that magma ascended beneath the old Taburiente shield volcano and moved southward along the rift. The eruption began on June 24, 1949, with phreatomagmatic activity at Duraznero crater on the ridgetop (ca. 1880 m above sea level), where five vents erupted tephritic lava along a 400-m-long fissure. On June 8, the Duraznero vents shut down abruptly, and the activity shifted to an off-rift fissure at Llano del Banco, located at ca. 550 m lower elevation and 3 km to the northwest. This eruptive center issued initially tephritic aa and later basanitic pahoehoe lava at high rates, producing a lava flow that entered the sea. Two days after basanite began to erupt at Llano del Banco, Hoyo Negro crater (ca. 1880 m asl), located 700 m north of Duraznero along the rift, opened on July 12 and produced ash and bombs of basanitic to phonotephritic composition in violent phreatomagmatic explosions ( White and Schmincke, 1999). Llano del Banco and Hoyo Negro were simultaneously active for 11 days and showed a co-variance of their eruption rates indicating a shallow hydraulic connection. On July 30, after 3 days of quiescence at all vents, Duraznero and Hoyo Negro became active again during a final eruptive phase. Duraznero issued basanitic lava at high rates for 12 h and produced a lava flow that descended towards the east coast. The lava contains ca. 1 vol.% crustal and mantle xenoliths consisting of 40% tholeiitic gabbros from the oceanic crust, 35% alkaline gabbros, and 20% ultramafic cumulates. The occurrence of xenoliths almost exclusively in the final lava is consistent with their origin by wall-rock collapse at depth near the end of the eruption

Chronology of the episode 54 eruption at Kilauea Volcano, Hawaii, from GOES-9 satellite data

USGS Publications Warehouse

Harris, A.J.L.; Keszthelyi, L.; Flynn, L.P.; Mouginis-Mark, P. J.; Thornber, C.; Kauahikaua, J.; Sherrod, D.; Trusdell, F.; Sawyer, M.W.; Flament, P.

1997-01-01

The free availability of GOES satellite data every 15 minutes makes these data an attractive tool for studying short-term changes on cloud-free volcanoes in the Pacific basin. We use cloud-free GOES-9 data to investigate the chronology of the January 1997, episode 54 eruption of Kilauea Volcano, Hawaii. Seventy-six images for this effusive eruption were collected over a 60-hour period and show the opening and shutdown of active fissures, the draining and refilling of the Pu'u 'O'o lava lake, and the cessation of activity at the ocean entry. Copyright 1997 by the American Geophysical Union.

Paving the seafloor: Volcanic emplacement processes during the 2005-2006 eruptions at the fast spreading East Pacific Rise, 9°50‧N

NASA Astrophysics Data System (ADS)

Fundis, A. T.; Soule, S. A.; Fornari, D. J.; Perfit, M. R.

2010-08-01

The 2005-2006 eruptions near 9°50'N at the East Pacific Rise (EPR) marked the first observed repeat eruption at a mid-ocean ridge and provided a unique opportunity to deduce the emplacement dynamics of submarine lava flows. Since these new flows were documented in April 2006, a total of 40 deep-towed imaging surveys have been conducted with the Woods Hole Oceanographic Institution's (WHOI) TowCam system. More than 60,000 digital color images and high-resolution bathymetric profiles of the 2005-2006 flows from the TowCam surveys were analyzed for lava flow morphology and for the presence of kipukas, collapse features, faults and fissures. We use these data to quantify the spatial distributions of lava flow surface morphologies and to investigate how they relate to the physical characteristics of the ridge crest, such as seafloor slope, and inferred dynamics of flow emplacement. We conclude that lava effusion rate was the dominant factor controlling the observed morphological variations in the 2005-2006 flows. We also show that effusion rates were higher than in previously studied eruptions at this site and varied systematically along the length of the eruptive fissure. This is the first well-documented study in which variations in seafloor lava morphology can be directly related to a well documented ridge-crest eruption where effusion rate varied significantly.

Assessment of the atmospheric impact of volcanic eruptions

NASA Technical Reports Server (NTRS)

Sigurdsson, H.

1988-01-01

The dominant global impact of volcanic activity is likely to be related to the effects of volcanic gases on the Earth's atmosphere. Volcanic gas emissions from individual volcanic arc eruptions are likely to cause increases in the stratospheric optical depth that result in surface landmass temperature decline of 2 to 3 K for less than a decade. Trachytic and intermediate magmas are much more effective in this regard than high-silica magmas, and may also lead to extensive ozone depletion due to effect of halogens and magmatic water. Given the assumed relationship between arc volcanism and subduction rate, and the relatively small variation in global spreading rates in the geologic record, it is unlikely that the rates of arc volcanism have varied greatly during the Cenozoic. Hotspot related basaltic fissure eruptions in the subaerial environment have a higher mass yield of sulfur, but lofting of the valcanic aerosol to levels above the tropopause is required for a climate impact. High-latitude events, such as the Laki 1783 eruption can easily penetrate the tropopause and enter the stratosphere, but formation of a stratospheric volcanic aerosol form low-latitude effusive basaltic eruptions is problematical, due to the elevated low-latitude tropopause. Due to the high sulfur content of hotspot-derived basaltic magmas, their very high mass eruption rates and the episodic behavior, hotspots must be regarded as potentially major modifiers of Earth's climate through the action of their volcanic volatiles on the chemistry and physics of the atmosphere.

A new model for the growth of basaltic shields based on deformation of Fernandina volcano, Galápagos Islands

USGS Publications Warehouse

Bagnardi, Marco; Amelung, Falk; Poland, Michael P.

2013-01-01

Space-geodetic measurements of surface deformation produced by the most recent eruptions at Fernandina – the most frequently erupting volcano in the Galápagos Archipelago – reveal that all have initiated with the intrusion of subhorizontal sills from a shallow magma reservoir. This includes eruptions from fissures that are oriented both radially and circumferentially with respect to the summit caldera. A Synthetic Aperture Radar (SAR) image acquired 1–2 h before the start of a radial fissure eruption in 2009 captures one of these sills in the midst of its propagation toward the surface. Galápagos eruptive fissures of all orientations have previously been presumed to be fed by vertical dikes, and this assumption has guided models of the origin of the eruptive fissure geometry and overall development of the volcanoes. Our findings allow us to reinterpret the internal structure and evolution of Galápagos volcanoes and of similar basaltic shields. Furthermore, we note that stress changes generated by the emplacement of subhorizontal sills feeding one type of eruption may control the geometry of subsequent eruptive fissures. Specifically, circumferential fissures tend to open within areas uplifted by sill intrusions that initiated previous radial fissure eruptions. This mechanism provides a possible explanation for the pattern of eruptive fissures that characterizes all the western Galápagos volcanoes, as well as the alternation between radial and circumferential fissure eruptions at Fernandina. The same model suggests that the next eruption of Fernandina will be from a circumferential fissure in the area uplifted by the 2009 sill intrusion, just southwest of the caldera rim.

Some observations regarding the thermal flux from Earth's erupting volcanoes for the period of 2000 to 2014

NASA Astrophysics Data System (ADS)

Wright, Robert; Blackett, Matthew; Hill-Butler, Charley

2015-01-01

present satellite measurements of the thermal flux observed from 95 active volcanoes, based on observations made daily over the past 15 years by NASA's Terra and Aqua Moderate Resolution Imaging Spectroradiometer sensors. Excursions from an apparent baseline level of thermal emission are attributable to episodic lava-flow-forming eruptions. Highest average intensity was associated with the July 2001 eruption of Etna, Italy, which radiated an average of 2.5 × 109 W over 23 days. However, recent fissure eruptions in the Afar Rift have attained higher average intensities of 2.4-4.4 × 109 W, albeit for days, not weeks. The largest magnitude eruption was the ongoing eruption of Bardarbunga, Iceland, which radiated 2.6 × 1016 J. Kīlauea, Hawai'i, has radiated the most energy since 2000, although the lava lake at Nyiragongo, Democratic Republic of Congo, comes a close second. Time series analysis reveals evidence for periodicity in radiant flux at some volcanoes but not at others.

Relative effects of pre- and post-eruption water fluoride on caries experience by surface type of permanent first molars.

PubMed

Singh, Kiran A; Spencer, A John

2004-12-01

To determine the relative pre- and post-eruption exposure effects of fluoridated water on the caries experience of different surface types of first permanent molars. Parental questionnaires covering residential history of participants were linked to the oral examinations of 6-15-year-old Australian children conducted in 1992 by the School Dental Services of South Australia and Queensland. Percentage of lifetime exposed to optimally fluoridated water pre- (PRE) and post-eruption (POST) was calculated with respect to tooth eruption age. Combined pre- and post-eruption categories were created to test PRE against POST exposure: PRE and POST = 0, PRE < POST, PRE = POST and in the range 0-90% of lifetime exposure, PRE > POST and, PRE and POST >or= 90% lifetime exposure. These categories were used as indicator variables in linear regression models with PRE and POST = 0 as reference in an analysis of first permanent molar DMFS scores overall and by surface type. Participation rates were 69.7% in South Australia (n = 9690) and 55.6% in Queensland (n = 10 195). Compared with the reference, the categories PRE > POST (beta = -0.033), PRE = POST (beta = -0.028) in the range 0-90% and, PRE and POST >or= 90% (beta = -0.055) showed significantly lower caries overall (P < 0.01), with a similar pattern for pit and fissure surface caries (beta = -0.035, -0.031 and -0.052, respectively). Only a high PRE and POST exposure decreased caries levels significantly in the approximal (beta = -0.038; P < 0.01) and free smooth surfaces (beta = -0.023; P = 0.03). Pre-eruption exposure was important for a caries preventive effect on first permanent molars in children 6-15 years old since post-eruption exposure alone could not lower caries levels significantly. For pit and fissure surfaces, a high pre-eruption exposure could decrease caries levels significantly. However, for other surface types, only a high pre- and post-eruption exposure produced a caries preventive effect.

A Foamy Lava Lake at Kilauea Volcano, Hawai`i

NASA Astrophysics Data System (ADS)

Poland, M. P.; Carbone, D.

2012-12-01

Kilauea Volcano, in Hawai`i, is currently erupting from two locations simultaneously: along the east rift zone and at the summit. The east rift zone eruption began in 1983 and is characterized by lava effusion from the Pu`u `O`o and nearby vents, while the summit eruptive vent, which opened in 2008, persistently emits gas and small amounts of ash while hosting a lava lake. On March 5, 2011, a dike initiated from the east rift zone magma conduit and reached the surface, resulting in the 4.5-day-long Kamoamoa fissure eruption just uprift of Pu`u `O`o. The eruption was accompanied by summit deflation as magma withdrew from subsurface reservoirs to feed the fissure eruption. The level of the summit lava lake dropped as the summit deflated. A continuously recording gravimeter located at Kilauea's summit (about 150 m east of the center of the summit eruptive vent, 80 m above the vent rim, and about 140 m above the highest level reached by the lava lake) measured a gravity decrease of about 150 μGal during the lava level drop, after taking into account corrections for the solid Earth tide. The gravity signal is caused by a combination of three processes. First, subsidence of 15 cm due to summit deflation moved the gravimeter closer to the center of the Earth, resulting in a gravity increase. Second, mass removal from the subsurface magma reservoir at a depth of 1.4 km (based on a model from GPS and InSAR data) caused a gravity decrease. Third, the drop in the level of the lava lake, which reached a maximum of about 150 m, led to a gravity decrease. Assuming a simple point source of pressure change and a typical density for basaltic magma (2.3-2.7 g/cm3), the first two processes can only explain a small percent of the observed gravity decrease, which must therefore be mainly due to the drop in the level of the lava lake. We developed a numerical model of the summit eruptive vent that takes into account its complex geometry (as deduced from geological observations). Using

The May 2005 eruption of Fernandina volcano, Galápagos: The first circumferential dike intrusion observed by GPS and InSAR

USGS Publications Warehouse

Chadwick, W.W.; Jonsson, Sigurjon; Geist, Dennis J.; Poland, M.; Johnson, Daniel J.; Batt, S.; Harpp, Karen S.; Ruiz, A.

2011-01-01

The May 2005 eruption of Fernandina volcano, Galápagos, occurred along circumferential fissures parallel to the caldera rim and fed lava flows down the steep southwestern slope of the volcano for several weeks. This was the first circumferential dike intrusion ever observed by both InSAR and GPS measurements and thus provides an opportunity to determine the subsurface geometry of these enigmatic structures that are common on Galápagos volcanoes but are rare elsewhere. Pre- and post- eruption ground deformation between 2002 and 2006 can be modeled by the inflation of two separate magma reservoirs beneath the caldera: a shallow sill at ~1 km depth and a deeper point-source at ~5 km depth, and we infer that this system also existed at the time of the 2005 eruption. The co-eruption deformation is dominated by uplift near the 2005 eruptive fissures, superimposed on a broad subsidence centered on the caldera. Modeling of the co-eruption deformation was performed by including various combinations of planar dislocations to simulate the 2005 circumferential dike intrusion. We found that a single planar dike could not match both the InSAR and GPS data. Our best-fit model includes three planar dikes connected along hinge lines to simulate a curved concave shell that is steeply dipping (~45–60°) toward the caldera at the surface and more gently dipping (~12–14°) at depth where it connects to the horizontal sub-caldera sill. The shallow sill is underlain by the deep point source. The geometry of this modeled magmatic system is consistent with the petrology of Fernandina lavas, which suggest that circumferential eruptions tap the shallowest parts of the system, whereas radial eruptions are fed from deeper levels. The recent history of eruptions at Fernandina is also consistent with the idea that circumferential and radial intrusions are sometimes in a stress-feedback relationship and alternate in time with one another.

Changes in heat released by hydrothermal circulation monitored during an eruptive cycle at Mt. Etna (Italy)

NASA Astrophysics Data System (ADS)

Diliberto, I. S.; Gagliano Candela, E.; Morici, S.; Pecoraino, G.; Bellomo, S.; Bitetto, M.; Longo, M.

2018-04-01

The shallow vertical temperature profile has been measured in the proximity of an eruptive fissure far about 4 km north-northeast from Mt. Etna central craters. The monitoring site was a steam-heated soil lying between a group of flank fractures on the upper northeast flank of Mt. Etna (Italy), i.e., on the northeast rift. We chose this area because it was close to an eruptive fissure, that opened in 2002 and extended from about 2500 to about 1500 m a.s.l., with our aim being to determine a connection between this fracture system and the ongoing volcanic activity. Heat flux anomalies from the ground from September 2009 to September 2012 were evaluated. Changes in the hydrothermal release—which can be related to variations in volcanic activity—are discussed and compared to the published geophysical data. The heat flux ranges varied during the pre-eruptive (from about 7 to 38 W × m-2), syn-eruptive (from about 3 to 49 W × m-2), and post-eruptive phases, with the heat released being lowest at the latter phase (from about 1 to 20 W × m-2). Moreover, the heat flux time variation was strongly correlated with the eruption rate from the new southeast crater between January 2011 and April 2012. The migration of magma through active conduits acts as a changing heating source for steam-heated soils located above the active fractures. Our findings suggest that tracking the heat flux above active fractures constitutes a useful investigation field for low-cost thermal monitoring of volcanic activity. Time variations in their emissions could highlight the relationship between a hydrothermal circuit and the local network of fractures, possibly indicating variation in the structural weakness of a volcanic edifice. Continuous monitoring of heat flux, combined with a realistic model, would contribute to multidisciplinary investigations aimed at evaluating changes in volcano dynamics.

The violent Strombolian eruption of 10 ka Pelado shield volcano, Sierra Chichinautzin, Central Mexico

NASA Astrophysics Data System (ADS)

Lorenzo-Merino, A.; Guilbaud, M.-N.; Roberge, J.

2018-03-01

Pelado volcano is a typical example of an andesitic Mexican shield with a summital scoria cone. It erupted ca. 10 ka in the central part of an elevated plateau in what is today the southern part of Mexico City. The volcano forms a roughly circular, 10-km wide lava shield with two summital cones, surrounded by up to 2.7-m thick tephra deposits preserved up to a distance of 3 km beyond the shield. New cartographic, stratigraphic, granulometric, and componentry data indicate that Pelado volcano was the product of a single, continuous eruption marked by three stages. In the early stage, a > 1.5-km long fissure opened and was active with mild explosive activity. Intermediate and late stages were mostly effusive and associated with the formation of a 250-m high lava shield. Nevertheless, during these stages, the emission of lava alternated and/or coexisted with highly explosive events that deposited a widespread tephra blanket. In the intermediate stage, multiple vents were active along the fissure, but activity was centered at the main cone during the late stage. The final activity was purely effusive. The volcano emitted > 0.9 km3 dense-rock equivalent (DRE) of tephra and up to 5.6 km3 DRE of lavas. Pelado shares various features with documented "violent Strombolian" eruptions, including a high fragmentation index, large dispersal area, occurrence of plate tephra, high eruptive column, and simultaneous explosive and effusive activity. Our results suggest that the associated hazards (mostly tephra fallout and emplacement of lava) would seriously affect areas located up to 25 km from the vent for fallout and 5 km from the vent for lava, an important issue for large cities built near or on potentially active zones, such as Mexico City.

The Fathers Day Eruption of Kilauea, Volcano, Hawaii: a gas Emissions Perspective

NASA Astrophysics Data System (ADS)

Sutton, A.; Elias, T.

2007-12-01

gases as well. SO2 emissions declined dramatically from Pu`u `O`o, dropping below 100 t/d by early July and remained low for several weeks even after lava reappeared in Pu`u `O`o. This overall decline in east rift gas release is reasonably consistent with the observed eruptive events: the dike likely robbed the magma supply but produced only the scanty KNH eruption, and the thinness of the dike geometry proved a poor conduit for SO2 release from depth. The beginning of the 21 July fissure activity reflected a return of magma and significant gas release to the Pu`u `O`o area as pressure within the shallow vent system exceeded structural integrity of the edifice. Following a brief increase in SO2 emissions at the onset of fissure activity, values declined, while effusion remained high. The low level of SO2 release, which persisted for the first several weeks of this fissure activity possibly reflected displacement of old rift-stored magma with newer magma coming from the summit and passing beneath the Pu`u `O`o system. Beginning 12 August, Pu`u `O`o re-emerged as Kilauea's primary SO2 degassing source, even though all extrusion as of this writing is occurring from the fissure system east of the cone. Currently, Kilauea appears to be following a pattern similar to that of the 1986-1991 Kupaianaha era, wherein most SO2 release was from Pu`u `O`o while active extrusion occurred down rift.

InSAR analysis for detecting the route of hydrothermal fluid to the surface during the 2015 phreatic eruption of Hakone Volcano, Japan

NASA Astrophysics Data System (ADS)

Doke, Ryosuke; Harada, Masatake; Mannen, Kazutaka; Itadera, Kazuhiro; Takenaka, Jun

2018-04-01

Although the 2015 Hakone Volcano eruption was a small-scale phreatic eruption with a discharged mass of only about 100 tons, interferometric synthetic aperture radar successfully detected surface deformations related to the eruption. Inversion model of the underground hydrothermal system based on measured ground displacements by ALOS-2/PALSAR-2 images showed that a crack opened at an elevation of about 530-830 m, probably at the time of the eruption. A geomorphological analysis detected several old NW-SE trending fissures, and the open crack was located just beneath one of the fissures. Thus, the crack that opened during the 2015 eruption could have been a preexisting crack that formed during a more voluminous hydrothermal eruption. In addition, the inversion model implies that a sill deflation occurred at an elevation of about 225 m, probably at the time of the eruption. The deflation of sill-like body represents a preexisting hydrothermal reservoir at an elevation of 100-400 m, which intruded fluid in the open crack prior to eruption. The volume changes of the open crack and the sill were calculated to be 1.14 × 105 m3 (inflation) and 0.49 × 105 m3 (deflation), respectively. A very local swelling (about 200 m in diameter) was also detected at the eruption center 2 months before the eruption. The local swelling, whose rate in satellite line-of-sight was 0.7-0.9 cm/day during May 2015 and declined in June, had been monitored until the time of the eruption, when its uplift halted. This was modeled as a point pressure source at an elevation of about 900 m (at a depth of about 80-90 m from the ground surface) and is considered to be a minor hydrothermal reservoir just beneath the fumarolic field. Our analysis shows that the northernmost tip of the open crack reached within 200 m of the surface. Thus, it is reasonable to assume that the hydrothermal fluid in the open crack found a way to the surface and formed the eruption.[Figure not available: see fulltext.

Using the spatial distribution and lithology of ballistic blocks to interpret eruption sequence and dynamics: August 6 2012 Upper Te Maari eruption, New Zealand

NASA Astrophysics Data System (ADS)

Breard, E. C. P.; Lube, G.; Cronin, S. J.; Fitzgerald, R.; Kennedy, B.; Scheu, B.; Montanaro, C.; White, J. D. L.; Tost, M.; Procter, J. N.; Moebis, A.

2014-10-01

The ballistic ejection of blocks during explosive eruptions constitutes a major hazard near active volcanoes. Fields of ballistic clasts can provide important clues towards quantifying the energy, dynamics and directionality of explosive events, but detailed datasets are rare. During the 6 August 2012 hydrothermal eruption of Upper Te Maari (Tongariro), New Zealand, three explosions occurred in rapid succession within less than 20 s. The first two produced laterally-directed pyroclastic density currents (PDC), and the final vertical explosion generated an ash plume. Each of these explosions was associated with the ejection of ballistic blocks. We present detailed maps of the resulting 5.1 km2 block impact field and the distribution of the > 2200 impact craters with diameters > 2.5 m. There are two distinct regions of high crater concentration, where crater densities reach more than six times the average background density. These occur at distances of 500-700 m east and 1000-1350 west of a 430-m-long fissure that was created during the eruption. The high-density fields are characterized by a narrow radial spread of < 45° and are located along the proximal transport direction of the pyroclastic density currents. A provenance analysis of ballistic blocks allowed us to reconstruct two different eruptive vents for the explosions. The first two laterally-directed explosions were sourced from the fissure, while the third explosion occurred through the pre-existing Upper Te Maari Crater, generating a roughly axisymmetric shower of ballistics. Stratigraphic relationships between impact craters, PDC and fall deposits suggest that the ballistic blocks were initially coupled with the rapidly expanding gas-particle mixtures that produced the PDCs. Ballistic trajectory modeling, reproducing the lateral extent and main impact density pattern of the western impact field, allows estimation of the vertical expansion angle of the second and largest explosion. The calculations show

Spatially resolved near infrared observations of Enceladus' tiger stripe eruptions from Cassini VIMS

NASA Astrophysics Data System (ADS)

Dhingra, Deepak; Hedman, Matthew M.; Clark, Roger N.; Nicholson, Philip D.

2017-08-01

Particle properties of individual fissure eruptions within Enceladus' plume have been analyzed using high spatial resolution Visible and Infrared Mapping Spectrometer (VIMS) observations from the Cassini mission. To first order, the spectra of the materials emerging from Cairo, Baghdad and Damascus sulci are very similar, with a strong absorption band around 3 μm due to water-ice. The band minimum position indicates that the ice grains emerging from all the fissures are predominantly crystalline, which implies that the water-ice particles' formation temperatures are likely above 130 K. However, there is also evidence for subtle variations in the material emerging from the different source fissures. Variations in the spectral slope between 1-2.5 μm are observed and probably reflect differences in the size distributions of particles between 0.5 and 5 μm in radius. We also note variations in the shape of the 3 μm water-ice absorption band, which are consistent with differences in the relative abundance of > 5 μm particles. These differences in the particle size distribution likely reflect variations in the particle formation conditions and/or their transport within the fissures. These observations therefore provide strong motivation for detailed modeling to help place important constraints on the diversity of the sub-surface environmental conditions at the geologically active south-pole of Enceladus.

Anomalous sylvian fissure morphology in Williams syndrome.

PubMed

Eckert, Mark A; Galaburda, Albert M; Karchemskiy, Asya; Liang, Alyssa; Thompson, Paul; Dutton, Rebecca A; Lee, Agatha D; Bellugi, Ursula; Korenberg, Julie R; Mills, Debra; Rose, Fredric E; Reiss, Allan L

2006-10-15

The unusual sensitivity and attraction to auditory stimuli in people with Williams syndrome (WS) has been hypothesized to be the consequence of atypical development of brain regions surrounding the Sylvian fissure. Planum temporale surface area, which is determined in part by Sylvian fissure patterning, was examined in 42 WS and 40 control participants to determine if anomalous Sylvian fissure morphology is present in WS. WS participants had significantly reduced leftward asymmetry of the planum temporale compared to control participants, due to a significant expansion in the size of the right planum temporale. The increased right planum temporale size was largely due to WS participants (24%) who had a right hemisphere Sylvian fissure that coursed horizontally and failed to ascend into the parietal lobe. This sulcal pattern is unusual in the right hemisphere and is more commonly found in the left hemisphere of typically developing individuals. There were no control participants with this type of right hemisphere Sylvian fissure pattern. The right hemisphere Sylvian fissure sulcal patterns were also related to a measure of cortical complexity and the amount of right hemisphere occipital lobe volume, suggesting that intrinsic genetic influences leading to anomalous visual system development in WS have widespread influences on cortical morphology that are similar in manner to extrinsic embryonic visual system lesions.

Recent ground fissures in the Hetao basin, Inner Mongolia, China

NASA Astrophysics Data System (ADS)

He, Zhongtai; Ma, Baoqi; Long, Jianyu; Zhang, Hao; Liang, Kuan; Jiang, Dawei

2017-10-01

Ground fissures are a geological hazard with complex formation mechanisms. Increasing amounts of human activity have created more ground fissures, which can destroy buildings and threaten human security. Some ground fissures indicate potentially devastating earthquakes, so we must pay attention to these hazards. This paper documents recently discovered ground fissures in the Hetao basin. These ground fissures are located along the frontal margins of the terraces of the Sertengshan piedmont fault. These fissures are 600-1600 m long, 5-50 cm wide, and at most 1 m deep. These ground fissures emerged after 2010 and ruptured newly constructed roads and field ridges. The deep geodynamic mechanisms within this extensional environment, which is dominated by NE-SW principal compressive shear, involve N-S tensile stress, which has produced continuous subsidence in the Hetao basin and continuous activity along the Sertengshan piedmont fault since the late Quaternary. Trenches across the ground fissures reveal that the fissures are the latest manifestation of the activity of preexisting faults and are the result of creep-slip movement along the faults. The groundwater level in the Hetao basin has been dropping since the 1960s because of overexploitation, resulting in subsidence. When the tensile stress exceeds the ultimate tensile strength of the strata, the strata rupture along preexisting faults, producing ground fissures. Thus, the Sertengshan piedmont fault planes are the structural foundation of the ground fissures, and groundwater extraction induces the development of ground fissures.

Pu'u 'Ō'ō-Kūpaianaha eruption of Kilauea, November 1991-February 1994; field data and flow maps

USGS Publications Warehouse

Heliker, C. Christina; Mangan, Margaret T.; Mattox, Tari N.; Kauahikaua, James P.

1998-01-01

The Pu'u 'Ō'ō-Kūpaianaha eruption on the east rift zone of Kīlauea, which began in January 1983, is the longest-lived rift zone eruption of the last two centuries. By 1994, a broad field of lava, nearly 1 km3 in volume and 12 km wide at the coast, had buried 87 km2 of the volcano's south flank. The initial six months of fissure eruptions (episodes 1-3) were followed by three years of episodic lava fountaining from the Pu'u 'Ō'ō vent (episodes 4–47). In July 1986, after two days of fissure eruptions up- and downrift from Pu'u 'Ō'ō (episodes 48a and 48b), the eruption shifted to a new vent, Kūpaianaha, 3.5 km downrift. For the next five-and-a-half years (episode 48), Kūpaianaha was the site of nearly continuous low-level effusion. The 49th episode occurred in November 1991, when several fissures opened between Pu'u 'Ō'ō and Kūpaianaha (see Mangan and others, 1995, Bulletin of Volcanology, v. 57, p. 127-135). This three-week-long outburst was the result of the waning output of the Kūpaianaha vent, which finally died in February 1992 (see Kauahikaua and others, 1996, Bulletin of Volcanology, v. 57, p. 641-648). The third epoch of the eruption began ten days later, when vents opened on the uprift slope of the Pu'u 'Ō'ō cone. Several flank vents erupted over the next two years (episodes 50-53). In the first year, from February 1992 through February 1993, the low-level effusion was interrupted by 21 brief pauses. These ended with the beginning of episode 53 in February 1993, and for the next year, lava effusion was continuous. Episode 53 was ongoing at the end of the interval covered by this report. During the years that Kūpaianaha was active, the Pu'u 'Ō'ō conduit gradually evolved into a crater 300 m in diameter as the conduit walls collapsed. Beginning in 1987, an active lava pond was intermittently visible in the bottom of the crater; from 1990 on, the pond was almost continuously present. The Pu'u 'Ō‘ō pond drained at the beginning of episode

High resolution digital elevation modelling from TLS and UAV campaign reveals structural complexity at the 2014/15 Holuhraun eruption site, Iceland

NASA Astrophysics Data System (ADS)

Müller, Daniel; Walter, Thomas R.; Schöpa, Anne; Witt, Tanja; Steinke, Bastian; Gudmundsson, Magnús T.; Dürig, Tobias

2017-07-01

Fissure eruptions are commonly linked to magma dikes at depth, associated with elastic and anelastic surface deformation. Elastic deformation is well described by subsidence above, uplift and lateral widening perpendicular to the dike plane. The anelastic part is associated with the formation of a graben, bordered by graben parallel faults that might express as sets of fractures at the surface. Additionally secondary structures, like push ups, bends and step overs yield information about the deforming domain. The formation of such structures associated with fissure eruptions, however, is barely preserved in nature because of the rapid erosion or sediment coverage. Therefore, simple normal fault displacements are commonly assumed at dikes. At the 2014/2015 Holuhraun eruption sites (Iceland), evidence is increasing that the developing fractures are showing variations in their displacement modes. In an attempt to investigate these variations, a fieldwork mapping project combining Terrestrial Laser Scanning (TLS) and Unmanned Aerial Vehicle (UAV) based aerophoto analysis was realized. From this data, we generated locally high resolution Digital Elevation Models (DEMs) and a structural map that allows for identification of kinematic indicators and assessing particularities of the observed structures. We identified 315 fracture segments from satellite data. For single segments we measured strike directions including the amount of opening and opening angles, indicating that many of the measured fractures show transtensional dislocations. Out of these, 81 % are showing significant left-lateral slip, only 17% right-lateral slip and 2% pure tensile opening. We show that local complexities in the fracture traces and geometries are closely related to variations in the transtensional opening direction. Moreover, we identified local changes in fracture azimuths and offsets close to eruption sites, which we speculate to be associated with geometrical changes in the magma feeder

A visualization system for CT based pulmonary fissure analysis

NASA Astrophysics Data System (ADS)

Pu, Jiantao; Zheng, Bin; Park, Sang Cheol

2009-02-01

In this study we describe a visualization system of pulmonary fissures depicted on CT images. The purpose is to provide clinicians with an intuitive perception of a patient's lung anatomy through an interactive examination of fissures, enhancing their understanding and accurate diagnosis of lung diseases. This system consists of four key components: (1) region-of-interest segmentation; (2) three-dimensional surface modeling; (3) fissure type classification; and (4) an interactive user interface, by which the extracted fissures are displayed flexibly in different space domains including image space, geometric space, and mixed space using simple toggling "on" and "off" operations. In this system, the different visualization modes allow users not only to examine the fissures themselves but also to analyze the relationship between fissures and their surrounding structures. In addition, the users can adjust thresholds interactively to visualize the fissure surface under different scanning and processing conditions. Such a visualization tool is expected to facilitate investigation of structures near the fissures and provide an efficient "visual aid" for other applications such as treatment planning and assessment of therapeutic efficacy as well as education of medical professionals.

The Sulfur Dioxide Plume from the February 26, 2000 Eruption of Mt. Hekla, Iceland

NASA Technical Reports Server (NTRS)

Krueger, Arlin J.; Krotkov, N. A.; Einaudi, Franco (Technical Monitor)

2000-01-01

The February 2000 fissure eruption of Mt. Hekla, Iceland was captured in sulfur dioxide data from the Earth Probe TOMS. A special algorithm is used to discriminate sulfur dioxide from ozone. The eruption began at 18:19 GMT on February 26, 2000 and was first viewed by TOMS at 09:55 GMT on February 27. The volcanic cloud at that time appeared as a very long and narrow arc extending west from the volcano in southern Iceland, then north across Greenland, and finally east towards Norway. The cloud altitude was reported from aircraft sightings and data to be above 10 km. The circulation of a ridge located north of Iceland produced the large arc shaped cloud. As the eruption is non-explosive the high altitude cloud contains little ash. Almost all the ash from the eruption fell out locally across Iceland. By February 29, the sulfur dioxide cloud had drifted eastward in a band along the Barents Sea coast of Norway and Russia. The analysis includes an assessment of the initial sulfur dioxide content and its rate of conversion to sulfate.

Reduction of randomness in seismic noise as a short-term precursor to a volcanic eruption.

PubMed

Glynn, C C; Konstantinou, K I

2016-11-24

Ambient seismic noise is characterized by randomness incurred by the random position and strength of the noise sources as well as the heterogeneous properties of the medium through which it propagates. Here we use ambient noise data recorded prior to the 1996 Gjálp eruption in Iceland in order to show that a reduction of noise randomness can be a clear short-term precursor to volcanic activity. The eruption was preceded on 29 September 1996 by a Mw ~5.6 earthquake that occurred in the caldera rim of the Bárdarbunga volcano. A significant reduction of randomness started occurring 8 days before the earthquake and 10 days before the onset of the eruption. This reduction was observed even at stations more than 100 km away from the eruption site. Randomness increased to its previous levels 160 minutes after the Bárdarbunga earthquake, during which time aftershocks migrated from the Bárdarbunga caldera to a site near the Gjálp eruption fissure. We attribute this precursory reduction of randomness to the lack of higher frequencies (>1 Hz) in the noise wavefield caused by high absorption losses as hot magma ascended in the upper crust.

Lung fissure detection in CT images using global minimal paths

NASA Astrophysics Data System (ADS)

Appia, Vikram; Patil, Uday; Das, Bipul

2010-03-01

Pulmonary fissures separate human lungs into five distinct regions called lobes. Detection of fissure is essential for localization of the lobar distribution of lung diseases, surgical planning and follow-up. Treatment planning also requires calculation of the lobe volume. This volume estimation mandates accurate segmentation of the fissures. Presence of other structures (like vessels) near the fissure, along with its high variational probability in terms of position, shape etc. makes the lobe segmentation a challenging task. Also, false incomplete fissures and occurrence of diseases add to the complications of fissure detection. In this paper, we propose a semi-automated fissure segmentation algorithm using a minimal path approach on CT images. An energy function is defined such that the path integral over the fissure is the global minimum. Based on a few user defined points on a single slice of the CT image, the proposed algorithm minimizes a 2D energy function on the sagital slice computed using (a) intensity (b) distance of the vasculature, (c) curvature in 2D, (d) continuity in 3D. The fissure is the infimum energy path between a representative point on the fissure and nearest lung boundary point in this energy domain. The algorithm has been tested on 10 CT volume datasets acquired from GE scanners at multiple clinical sites. The datasets span through different pathological conditions and varying imaging artifacts.

Robust pulmonary lobe segmentation against incomplete fissures

NASA Astrophysics Data System (ADS)

Gu, Suicheng; Zheng, Qingfeng; Siegfried, Jill; Pu, Jiantao

2012-03-01

As important anatomical landmarks of the human lung, accurate lobe segmentation may be useful for characterizing specific lung diseases (e.g., inflammatory, granulomatous, and neoplastic diseases). A number of investigations showed that pulmonary fissures were often incomplete in image depiction, thereby leading to the computerized identification of individual lobes a challenging task. Our purpose is to develop a fully automated algorithm for accurate identification of individual lobes regardless of the integrity of pulmonary fissures. The underlying idea of the developed lobe segmentation scheme is to use piecewise planes to approximate the detected fissures. After a rotation and a global smoothing, a number of small planes were fitted using local fissures points. The local surfaces are finally combined for lobe segmentation using a quadratic B-spline weighting strategy to assure that the segmentation is smooth. The performance of the developed scheme was assessed by comparing with a manually created reference standard on a dataset of 30 lung CT examinations. These examinations covered a number of lung diseases and were selected from a large chronic obstructive pulmonary disease (COPD) dataset. The results indicate that our scheme of lobe segmentation is efficient and accurate against incomplete fissures.

Anal fissure - slideshow

MedlinePlus

... this page: //medlineplus.gov/ency/presentations/100154.htm Anal fissure - series—Normal anatomy To use the sharing ... rectum through which passes stool during defecation. The anal sphincter is a critical mechanism for control of ...

Quantitative evaluation of variance in secondary dentition eruption among ethnic groups in Hawai'i.

PubMed

Greer, Mark H K; Loo, Kevin J

2003-03-01

Though little scientific evidence existed to support the belief among dentists who treat Pacific Islander populations that many children of the region erupt secondary teeth earlier and at an eruption rate which exceeds Caucasian children. Based upon a data set created in Hawai'i during the 1998-1999 school year, of 26,097 public school children, the opportunity presented itself to examine for variance in eruption timing and sequence. Hawai'i is an ethnic diverse community, with a majority population comprised of Asians and Pacific Islanders. Children, 5 through 9 years of age, were examined for gender and ethnic variance. In the aggregate, at all ages, girls erupted teeth earlier than boys, however, while generally true among individual tooth types, that variance was not always statistically significant. By ethnic group, African Americans exhibited earlier eruption by contrast with Caucasians, however, Caucasian children caught up by nine years of age. Native Hawaiian, Samoan and Tongan children exhibited earlier and high rates of secondary dentition eruption than Caucasian or African American children. Children of various Asian cohorts did not exhibit significant variance by contrast with Caucasians. Based upon these findings, the authors recommend that dietary fluoride supplementation of Native Hawaiian, Samoan and Tongan children begin at birth rather than 6 months of age and that these children be targeted for pit & fissure sealants as early as five years of age.

Eruption of magmatic foams on the Moon: Formation in the waning stages of dike emplacement events as an explanation of ;irregular mare patches;

NASA Astrophysics Data System (ADS)

Wilson, Lionel; Head, James W.

2017-04-01

Volcanic eruptions on the Moon take place in conditions of low gravity and negligible atmospheric pressure, very different from those on Earth. These differences lead to characteristic lunar versions of hawaiian and strombolian explosive activity, and to the production of unusual eruption products neither predicted nor observed on Earth in the terminal stages of eruptions. These include the unusual mounds and rough (hummocky, blocky) floors of some small-shield summit pit crater floors, elongate depressions and mare flows (similar to those named ;irregular mare patches;, IMPs, by Braden et al., 2014). We examine the ascent and eruption of magma in the waning stages of the eruptive process in small-shield summit pit crater floors and show that many IMP characteristics can be plausibly explained by basaltic magma behavior as the rise rate of the ascending magma slows to zero, volatiles exsolve in the dike and lava lake to form a very vesicular foam, and the dike begins to close. Stresses in the very vesicular and porous lava lake crust produce fractures through which the foam extrudes at a rate determined by its non-Newtonian rheology. Waning-stage extrusion of viscous magmatic foams to the surface produces convex mounds whose physical properties inhibit typical impact crater formation and regolith development, creating an artificially young crater retention age. This mechanism for the production and extrusion of very vesicular magmatic foams is also applicable to waning-stage dike closure associated with pit craters atop dikes, and fissure eruptions in the lunar maria, providing an explanation for many irregular mare patches. This mechanism implies that IMPs and associated mare structures (small shields, pit craters and fissure flows) formed synchronously billions of years ago, in contrast to very young ages (less than 100 million years) proposed for IMPs by some workers.

The June 2014 eruption at Piton de la Fournaise: Robust methods developed for monitoring challenging eruptive processes

NASA Astrophysics Data System (ADS)

Villeneuve, N.; Ferrazzini, V.; Di Muro, A.; Peltier, A.; Beauducel, F.; Roult, G. C.; Lecocq, T.; Brenguier, F.; Vlastelic, I.; Gurioli, L.; Guyard, S.; Catry, T.; Froger, J. L.; Coppola, D.; Harris, A. J. L.; Favalli, M.; Aiuppa, A.; Liuzzo, M.; Giudice, G.; Boissier, P.; Brunet, C.; Catherine, P.; Fontaine, F. J.; Henriette, L.; Lauret, F.; Riviere, A.; Kowalski, P.

2014-12-01

After almost 3.5 years of quiescence, Piton de la Fournaise (PdF) produced a small summit eruption on 20 June 2014 at 21:35 (GMT). The eruption lasted 20 hours and was preceded by: i) onset of deep eccentric seismicity (15-20 km bsl; 9 km NW of the volcano summit) in March and April 2014; ii) enhanced CO2 soil flux along the NW rift zone; iii) increase in the number and energy of shallow (<1.5 km asl) VT events. The increase in VT events occurred on 9 June. Their signature, and shallow location, was not characteristic of an eruptive crisis. However, at 20:06 on 20/06 their character changed. This was 74 minutes before the onset of tremor. Deformations then began at 20:20. Since 2007, PdF has emitted small magma volumes (<3 Mm3) in events preceded by weak and short precursory phases. To respond to this challenging activity style, new monitoring methods were deployed at OVPF. While the JERK and MSNoise methods were developed for processing of seismic data, borehole tiltmeters and permanent monitoring of summit gas emissions, plus CO2 soil flux, were used to track precursory activity. JERK, based on an analysis of the acceleration slope of a broad-band seismometer data, allowed advanced notice of the new eruption by 50 minutes. MSNoise, based on seismic velocity determination, showed a significant decrease 7 days before the eruption. These signals were coupled with change in summit fumarole composition. Remote sensing allowed the following syn-eruptive observations: - INSAR confirmed measurements made by the OVPF geodetic network, showing that deformation was localized around the eruptive fissures; - A SPOT5 image acquired at 05:41 on 21/06 allowed definition of the flow field area (194 500 m2); - A MODIS image acquired at 06:35 on 21/06 gave a lava discharge rate of 6.9±2.8 m3 s-1, giving an erupted volume of 0.3 and 0.4 Mm3. - This rate was used with the DOWNFLOW and FLOWGO models, calibrated with the textural data from Piton's 2010 lava, to run lava flow

Earth fissures and localized differential subsidence

USGS Publications Warehouse

Holzer, Thomas L.; Pampeyan, Earl H.

1981-01-01

Long linear tension cracks associated with declining groundwater levels at four sites in subsiding areas in south-central Arizona, Fremont Valley, California, and Las Vegas Valley, Nevada, occur near points of maximum convex-upward curvature in subsidence profiles oriented perpendicular to the cracks. Profiles are based on repeated precise vertical control surveys of lines of closely spaced bench marks. Association of these fissures with zones of localized differential subsidence indicates that linear earth fissures are caused by horizontal tensile strains probably resulting from localized differential compaction. Horizontal tensile strains across the fissures at the point of maximum convex-upward curvature, ranging from approximately 100 to 700 microstrains (0.01 to 0.07% per year), were indicated based on measurements with a tape or electronic distance meter.

Stratigraphic relationships and timing of the 2012 Havre submarine silicic volcanic eruption revealed by high resolution bathymetric mapping and observations by underwater vehicles.

NASA Astrophysics Data System (ADS)

Carey, R.; Soule, S. A.; Houghton, B. F.; White, J. D. L.; Manga, M.; Wysoczanski, R. J.; Tani, K.; McPhie, J.; Fornari, D. J.; Jutzeler, M.; Caratori Tontini, F.; Ikegami, F.; Jones, M.; Murch, A.; Fauria, K.; Mitchell, S. J.; Cahalan, R. C.; Conway, C.; McKenzie, W.

2015-12-01

The 2012 deep rhyolitic caldera eruption of Havre volcano in the Kermadec arc is the first historic observed submarine eruption that produced a pumice raft observed at the ocean's surface. Ship-based bathymetric surveys before and after the eruption permit the intricacies of eruption styles, products and timescales to be quantified. In 2015 we mapped this submarine volcano in unprecedented detail with two submergence vehicles in tandem, facilitating a wide and comprehensive geological survey and sampling mission. These efforts and observations show highly complex and often simultaneous eruptive behavior from more than 14 vents along two 3 km-long fissures that represent massive ruptures of the caldera walls. This survey also revealed an important role for pre- and inter-eruptive periods of mass wasting processes derived from the intrusion of magma and destablisation of caldera walls. The detailed characterization of the eruption products, and quantification of timescales provides the scientific community with the first glimpse of the nature of submarine, intermediate magnitude, deep silicic caldera eruptions and permits unanswered yet first order fundamental questions of submarine eruption and transport processes to be addressed in the decades to come.

Monitoring Changing Eruption Styles of Kilauea Volcano Over the Summer of 2007 With Spaceborne Infrared Data

NASA Astrophysics Data System (ADS)

Ramsey, M.; Wessels, R.

2007-12-01

On June 19, 2007 episode 56 (the Father's Day intrusion) of the ongoing eruption at Kilauea Volcano culminated with a small eruption of lava from a 250 m long fissure approximately 6 km west of Pu'u 'O'o. The event was preceded by an earthquake swarm and attributed to the intrusion of magma. This intrusion was also associated with cessation of activity at Pu'u 'O'o and deflation of its summit region. On July 21, 2007 new lava then erupted along a set of fissures that extended eastward from Pu'u 'O'o toward the old Kupaianaha vent. By early September, this eruption continued to supply a lava channel approximately 1 km long, which has fed two 'a'a flow lobes advancing to the northeast and southeast. We describe the application of spaceborne imaging data from the visible to the thermal infrared (TIR) wavelengths for monitoring activity throughout this period. Satellite thermal infrared (TIR) data with low spatial resolution (i.e., kms/pixel) have been used for years to monitor changes in surface thermal features such as volcanic flows. However, the use of higher spatial resolution data allows for the extraction of physical parameters at meter to sub-meter scales. The Advanced Spaceborne Thermal Emission and Reflection Radiometer (ASTER) provides TIR, shortwave infrared (SWIR), and visible-near infrared (VNIR) data ideal for this type of analysis, hazard assessment, and smaller-scale monitoring of active lava flows. From June-August of 2007, ASTER was scheduled 23 times and collected 11 independent scenes of the new flow activity at Kilauea. Of these, 7 were clear to partly-cloudy and show excellent coverage of the activity following the Father's Day intrusion. TIR and SWIR data, converted to atmospherically corrected emitted surface radiance, have been used to extract flow extent, areal coverage, flow advance rate, and maximum brightness temperature. These data correlate well with descriptions of the flow activity documented by Hawaiian Volcano Observatory field crews

Reduction of randomness in seismic noise as a short-term precursor to a volcanic eruption

PubMed Central

Glynn, C. C.; Konstantinou, K. I.

2016-01-01

Ambient seismic noise is characterized by randomness incurred by the random position and strength of the noise sources as well as the heterogeneous properties of the medium through which it propagates. Here we use ambient noise data recorded prior to the 1996 Gjálp eruption in Iceland in order to show that a reduction of noise randomness can be a clear short-term precursor to volcanic activity. The eruption was preceded on 29 September 1996 by a Mw ~5.6 earthquake that occurred in the caldera rim of the Bárdarbunga volcano. A significant reduction of randomness started occurring 8 days before the earthquake and 10 days before the onset of the eruption. This reduction was observed even at stations more than 100 km away from the eruption site. Randomness increased to its previous levels 160 minutes after the Bárdarbunga earthquake, during which time aftershocks migrated from the Bárdarbunga caldera to a site near the Gjálp eruption fissure. We attribute this precursory reduction of randomness to the lack of higher frequencies (>1 Hz) in the noise wavefield caused by high absorption losses as hot magma ascended in the upper crust. PMID:27883050

[Fissures in biliary calculi. Personal contribution (author's transl)].

PubMed

Nano, M; Potenzoni, F; Camandona, M; Casalegno, P A

1979-04-01

In a series of 70 patients suffering from biliary lithiasis, the roentgenologic findings of fissures in the calculi was observed in 5 cases examined by means of cholecystography and in 7 cases who underwent cholangiocholecystography. Fissures were demonstrated 11 times in calculi after surgery. The "Mercedes-Benz" sign was never observed at the abdominal examination without contrast medium. The presence of fissures may be an additional sign in the radiologic diagnosis of biliary calculi, but its value is not determinant.

Research on Integrated Geophysics Detect Potential Ground Fissure in City

NASA Astrophysics Data System (ADS)

Qian, R.

2017-12-01

North China confined aquifer lied 70 to 200 meters below the earth's surface has been exploited for several decades, which resulted in confined water table declining and has generated a mass of ground fissure. Some of them has reached the surface and the other is developing. As it is very difficult to stop the ground fissure coming into being, measures of avoiding are often taken. It brings great potential risk to urban architecture and municipal engineering. It is very important to find out specific distribution and characteristic of potential ground fissure in city with high resolution. The ground fissure is concealed, therefor, geophysical method is an important technology to detecting concealed ground fissure. However, it is very difficult to detect the characteristics of the superficial part of ground fissure directly, as it lies dozens of meters below and has only scores of centimeters fault displacement. This paper studies applied ground penetration radar, surface wave and shallow refleciton seismic to detect ground fissure. It sets up model of surface by taking advantage of high resolution of ground penetrating radar data, constrains Reilay wave inversion and improves its resolution. The high resolution reflection seismic is good at detecting the geology structure. The data processing and interpretation technique is developmented to avoid the pitfall and improve the aliability of the rusult. The experiment has been conducted in Shunyi District, Beijing in 2016. 5 lines were settled to collect data of integrated geophysical method. Development zone of concealed ground fissure was found and its ultra shallow layer location was detected by ground penetrating radar. A trial trench of 6 meters in depth was dug and obvious ground fissure development was found. Its upper end was 1.5 meters beneath the earth's surface with displacement of 0.3 meters. The favorable effect of this detection has provided a new way for detecting ground fissure in cities of China, such

A Computational Geometry Approach to Automated Pulmonary Fissure Segmentation in CT Examinations

PubMed Central

Pu, Jiantao; Leader, Joseph K; Zheng, Bin; Knollmann, Friedrich; Fuhrman, Carl; Sciurba, Frank C; Gur, David

2010-01-01

Identification of pulmonary fissures, which form the boundaries between the lobes in the lungs, may be useful during clinical interpretation of CT examinations to assess the early presence and characterization of manifestation of several lung diseases. Motivated by the unique nature of the surface shape of pulmonary fissures in three-dimensional space, we developed a new automated scheme using computational geometry methods to detect and segment fissures depicted on CT images. After a geometric modeling of the lung volume using the Marching Cube Algorithm, Laplacian smoothing is applied iteratively to enhance pulmonary fissures by depressing non-fissure structures while smoothing the surfaces of lung fissures. Next, an Extended Gaussian Image based procedure is used to locate the fissures in a statistical manner that approximates the fissures using a set of plane “patches.” This approach has several advantages such as independence of anatomic knowledge of the lung structure except the surface shape of fissures, limited sensitivity to other lung structures, and ease of implementation. The scheme performance was evaluated by two experienced thoracic radiologists using a set of 100 images (slices) randomly selected from 10 screening CT examinations. In this preliminary evaluation 98.7% and 94.9% of scheme segmented fissure voxels are within 2 mm of the fissures marked independently by two radiologists in the testing image dataset. Using the scheme detected fissures as reference, 89.4% and 90.1% of manually marked fissure points have distance ≤ 2 mm to the reference suggesting a possible under-segmentation of the scheme. The case-based RMS (root-mean-square) distances (“errors”) between our scheme and the radiologist ranged from 1.48±0.92 to 2.04±3.88 mm. The discrepancy of fissure detection results between the automated scheme and either radiologist is smaller in this dataset than the inter-reader variability. PMID:19272987

The 1909 Chinyero eruption on Tenerife (Canary Islands): insights from historical accounts, and tephrostratigraphic and geochemical data

NASA Astrophysics Data System (ADS)

Di Roberto, A.; Bertagnini, A.; Del Carlo, P.; Meletlidis, S.; Pompilio, M.

2016-12-01

The last eruption on Tenerife (Canary Islands, Spain) started on 18 November 1909 from the El Chinyero vent on the northwestern Santiago rift. This fissural eruption was well documented by scientists and eyewitnesses, but there is a lack of data on the high-energy phase that produced the most significant emissions of ash and lapilli at the onset of the eruption. Here, we review historical documents (e.g. newspapers, dispatches, telegrams); eyewitness accounts and scientific reports were reviewed from a volcanological perspective and integrated with data from the analysis of deposit features, allowing an accurate reconstruction of the eruption and its dynamics. The 1909 eruption of Chinyero was fed by a compositionally discrete magma batch that ascended rapidly within the crust, producing rather violent pulsating Strombolian explosive activity in the early phases of the eruption. This activity produced a ca. 80 m high scoria cone and heavy fallout of lapilli and ash over the entire northern sector of the island of Tenerife. The energy of explosive activity waned after 3 days, giving way to the weak Strombolian explosive activity that contributed to a lesser extent to the buildup of the pyroclastic pile. Eruptions such as those from the Chinyero vent in 1909 are representative of rift activity on Tenerife and constitute a volcanic hazard for present-day inhabitants.

Effect of air abrasion and polishing on primary molar fissures.

PubMed

Lenzi, T L; Menezes, L B R; Soares, F Z M; Rocha, R O

2013-04-01

To evaluate the effect of air abrasion and polishing on primary molar fissures under light microscopy. 15 exfoliated primary second molars were longitudinally sectioned and photographed under a stereomicroscope (40×; baseline evaluation). Sections were then randomly allocated into one of the two groups (n = 15) and treated by either air abrasion (aluminium oxide jet) or air polishing (sodium bicarbonate jet) for 30 s. After treatment, sections were washed with an air/water spray, dried with absorbent paper, and photographed as previously described (final evaluation). Baseline and final morphology were compared by two blinded examiners who evaluated changes in the width and depth of fissures. The percentage of changed fissures was analysed, and the two treatments were compared using the Mann-Whitney test (α = 0.01). Both air systems resulted in fissure changes in most (93.3 %) of the sections. No significant differences in fissure width changes were found between treatments, but when changes in fissure depth were evaluated, air polishing was found to be less damaging than air abrasion (p < 0.01). Air abrasion and polishing cause changes to the anatomical configuration of occlusal fissures of primary molars.

Density analysis of magmatic and phreatomagmatic phases of the 934 AD Eldgjá Eruption, southern Iceland

NASA Astrophysics Data System (ADS)

Moreland, William; Thordarson, Thorvaldur

2014-05-01

Eldgjá is a ~75 km long volcanic fissure vent system associated with the Katla volcanic system in southern Iceland, formed during an eruption in the mid-tenth century. The fissure is of the mixed-cone row type and produced both large lava fields and a widespread basaltic tephra deposit. Proximal tephra fall deposits are up to 4 m thick and contain numerous fall units of varying thickness which run parallel to the fissure, indicating many sources of eruption. The lower-most fall units thicken towards Mýrdalsjökull, demonstrating that the initial explosive phases took place within the glacier. Later fall units generally thicken towards the northeast with dispersal axes indicating origin at the more easterly segments of the Eldgjá vent system and a stepwise migration in an easterly direction. Both magmatic and phreatomagmatic explosive activity occurred along the vent system, where phreatomagmatic activity is confined to fissure segments within the Mýrdalsjökull glacier. Two key sections, chosen to represent magmatic and phreatomagmatic deposits, were logged and sampled for density analysis. A section at Skælingar, half a kilometre southeast of Eldgjá Proper was chosen to represent the magmatic products. It is 3.70 m thick and contains 9 fall-units including a distinct bomb-layer. The phreatomagmatic products are represented by a section from Stóragil, 20 km north-northeast of the Katla caldera and the sampled section is 1.12 m thick. Density analysis involves selecting 100 clasts 8-32 mm in diameter from <5 cm layers within the sub-units of each section. These clasts are then weighed, sealed and then weighed again in water to calculate their volume by Archimedes' principle and therefore their density, from which vesicularity can be calculated. The results were then plotted as histograms and compared with the section logs. The magmatic samples have unimodal, normal vesicularity distributions with typical modal values of 60-70% and a span of ~40%. Several of

Eruptive patterns and structure of Isla Fernandina, Galapagos Islands, from SPOT-1 HRV and large format camera images

NASA Technical Reports Server (NTRS)

Munro, Duncan C.; Mouginis-Mark, Peter J.

1990-01-01

SPOT-1 HRV, and large format-camera images were used to investigate the distribution and structure of erupted materials on Isla Fernandina, Galapagos Islands. Maps of lava flows, fissures, cones and topography derived from these data allow the first study of the entire subaerial segment of this geographically remote and ecologically sensitive volcano. No significant departure from a uniform distribution of erupted lava with azimuth can be detected. Short (less than 4 km) lava flows commonly have their source in the summit region and longer (greater than 8 km) lava flows originate from vents at lower elevations. Catastrophic landslides are proposed as a possible explanation for the asymmetry of the coastline with respect to the caldera.

The 2005 eruption of Sierra Negra volcano, Galápagos, Ecuador

USGS Publications Warehouse

Geist, Dennis J.; Harpp, Karen S.; Naumann, Terry R.; Poland, Michael P.; Chadwick, William W.; Hall, Minard; Rader, Erika

2008-01-01

Sierra Negra volcano began erupting on 22 October 2005, after a repose of 26 years. A plume of ash and steam more than 13 km high accompanied the initial phase of the eruption and was quickly followed by a ~2-km-long curtain of lava fountains. The eruptive fissure opened inside the north rim of the caldera, on the opposite side of the caldera from an active fault system that experienced an mb 4.6 earthquake and ~84 cm of uplift on 16 April 2005. The main products of the eruption were an `a`a flow that ponded in the caldera and clastigenic lavas that flowed down the north flank. The `a`a flow grew in an unusual way. Once it had established most of its aerial extent, the interior of the flow was fed via a perched lava pond, causing inflation of the `a`a. This pressurized fluid interior then fed pahoehoe breakouts along the margins of the flow, many of which were subsequently overridden by `a`a, as the crust slowly spread from the center of the pond and tumbled over the pahoehoe. The curtain of lava fountains coalesced with time, and by day 4, only one vent was erupting. The effusion rate slowed from day 7 until the eruption’s end two days later on 30 October. Although the caldera floor had inflated by ~5 m since 1992, and the rate of inflation had accelerated since 2003, there was no transient deformation in the hours or days before the eruption. During the 8 days of the eruption, GPS and InSAR data show that the caldera floor deflated ~5 m, and the volcano contracted horizontally ~6 m. The total eruptive volume is estimated as being ~150×106 m3. The opening-phase tephra is more evolved than the eruptive products that followed. The compositional variation of tephra and lava sampled over the course of the eruption is attributed to eruption from a zoned sill that lies 2.1 km beneath the caldera floor.

Eruptive History and Chemical Evolution of the Precaldera and Postcaldera Basalt-Dacite Sequences, Long Valley, California: Implications for Magma Sources, Current Seismic Unrest, and Future Volcanism

USGS Publications Warehouse

Bailey, Roy A.

2004-01-01

The Long Valley Volcanic Field in east-central California straddles the East Sierran frontal fault zone, overlapping the Sierra Nevada and western Basin and Range Provinces. The volcanic field overlies a mature mid-Tertiary erosional surface that truncates a basement composed mainly of Mesozoic plutons and associated roof pendants of Mesozoic metavolcanic and Paleozoic metasedimentary rocks. Long Valley volcanism began about 4 Ma during Pliocene time and has continued intermittently through the Holocene. The volcanism is separable into two basalt-rhyolite episodes: (1) an earlier, precaldera episode related to Long Valley Caldera that climaxed with eruption of the Bishop Tuff and collapse of the caldera; and (2) a later, postcaldera episode structurally related to the north-south-trending Mono-Inyo Craters fissure system, which extends from the vicinity of Mammoth Mountain northward through the west moat of the caldera to Mono Lake. Eruption of the basalt-dacite sequence of the precaldera basalt-rhyolite episode peaked volumetrically between 3.8 and 2.5 Ma; few basalts were erupted during the following 1.8 m.y. (2.5?0.7 Ma). Volcanism during this interval was dominated by eruption of the voluminous rhyolites of Glass Mountain (2.2?0.8 Ma) and formation of the Bishop Tuff magma chamber. Catastrophic rupture of the roof of this magma chamber caused eruption of the Bishop Tuff and collapse of Long Valley Caldera (760 ka), after which rhyolite eruptions resumed on the subsided caldera floor. The earliest postcaldera rhyolite flows (700?500 ka) contain quenched globular basalt enclaves (mafic magmatic inclusions), indicating that basaltic magma had reentered shallow parts of the magmatic system after a 1.8-m.y. hiatus. Later, at about 400 ka, copious basalts, as well as dacites, began erupting from vents mainly in the west moat of the caldera. These later eruptions initiated the postcaldera basalt-rhyolite episode related to the Mono-Inyo Craters fissure system, which

Who discovered the sylvian fissure?

PubMed

Collice, Massimo; Collice, Rosa; Riva, Alessandro

2008-10-01

Cerebral convolutions were unknown until the 17th century. A constant sulcus was not recognized until the mid-1600s; it was named "the fissure of Sylvius," after the person who had always been considered as the one who discovered it. It is commonly asserted that the first description of the lateral scissure was made by Caspar Bartholin, who attributed its discovery to Sylvius. However, this was not actually the case, as Caspar Bartholin died in 1629, whereas Sylvius started studying medicine in 1632. The description could have been made either by Caspar Bartholin's son Thomas or by Sylvius himself. Irrespective of the description's author, the key to the history of the lateral fissure is that it was first identified by Fabrici d'Acquapendente in 1600, 40 years before Sylvius' description. In one of the 300 colored plates (Tabulae Pictae) by Fabrici, the lateral fissure is perfectly depicted, as are the temporal convolutions. Therefore, even if it was an accidental discovery, Fabrici should be the one noted as having discovered the fissure. This article ends with a short history of the plates. They were painted in oil on paper and were thought to further a great work, the Theatrum Totius Animalis Fabricae, which was begun in 1591 and never completed or published. Only the colored illustrations of this project remain. These plates were forgotten for more than 200 years, until they were rediscovered by Giuseppe Sterzi in 1909. They are among the best examples of anatomic iconography in terms of innovation, accuracy, and artistic accomplishment.

Products of a Subglacial Flood Basalt Eruption

NASA Astrophysics Data System (ADS)

Gorny, C. F.; White, J. D. L.; Gudmundsson, M. T.

2015-12-01

The Snæbýlisheiði unit, SE Iceland, is a ca. 26 km³ elongate, flat-topped ridge of volcaniclastic debris coupled with and intruded by coherent basalt stretching over 34 km from the eruption site perpendicular to the rift fissure source. It formed from a single subglacial flood basalt eruption during a recent glaciation, and its elongation reflects glacial control on dispersal via the hydraulic potential gradient at the glacier's base, which drove towards the glacier terminus the meltwater+debris formed during the eruption by quenching and fragmentation. High magma discharge and outgassing drove segregation of magma into down-flow propagating intrusions. Edifice growth was mediated by the extent of ice melting, extent and efficiency of meltwater+debris drainage, and hydraulic gradients locally favoring meltwater accumulation. Eruption style reflected magma flux, edifice stability, and accessibility of water to the vent area via flooding or infiltration. Deposits reflect these competing factors in their chaotic internal organization and stratigraphy, limited lithofacies continuity, and diverse particle populations from multiple source vents. Linear growth of the ridge down-gradient from the eruption site was driven primarily by propagation and continuous fragmentation of shoaling intrusions that formed an interconnected intrusive complex with extensive peperites. Advance was along gently meandering and locally bifurcating sub-ice conduits within hyaloclastite with sheet-lobe levees and lobate fingered intrusions. Irregular dikes, apophyses, horns, and tendrils extended from the main body and generated voluminous lapilli tuff and contorticlasts while providing additional heat to the system. Prolonged transport and deposition of debris produced complexly bedded volcaniclastic deposits derived from and intruded by the basalt sheet. The bedding and depositional features of volcaniclastic debris and relationship to their adjacent intrusions suggest transport and

Textural constraints on the dynamics of the 2000 Miyakejima eruption

NASA Astrophysics Data System (ADS)

Garozzo, Ileana; Romano, Claudia; Giordano, Guido; Geshi, Nobuo; Vona, Alessandro

2016-04-01

Miyakejima Volcano is a basaltic-andesite stratovolcano active from ~10.000 years, located on the north of the Izu-Bonin arc. During the last 600 years the volcano has been characterized mainly by flank fissure activity, with explosive phreatomagmatic eruptions on the coastal areas. In the last century, the activity became more frequent and regular with intervals of 20 to 70 years (1940, 1962, 1983 and 2000). The last activity started on 27 June 2000, with a minor submarine eruption on the west coast of the volcano, and proceeded with six major summit eruptions from July 8 to August 29. The eruptions led to the formation of a collapse caldera ~1.6 km across. The total erupted tephra represents only 1.7% in volume of the caldera, the high fragmentation of magma produced mainly fine-grained volcanic ash. In order to improve the understanding on the triggering and dynamics of this explosive eruption, we carried out a detailed investigation of the erupted materials with particular attention to the textural features of juvenile pyroclasts (Vesicle and Crystal Size Distributions). The stratigraphic record can be divided into six fall units, corresponding to the six summit eruptions, although juvenile materials were identified only in 4 units (unit 2, 4, 5, 6). We selected about 100 juvenile grains sampled from the bottom to the top of each level, to be analyzed by scanning electron microscopy. The study of juvenile morphological features allowed us to recognize the existence of three characteristic morphotypes, showing marked differences in their external morphologies and internal textures (from poorly to highly crystallized and vesiculated clasts). The distribution of these morphotypes is non-homogeneous along the eruptive sequence indicating changes of dynamics during magma ascent. Juveniles do not show features inherited from the interaction with external water. Vesicle Volume Distributions of the selected ash grains show that the three types of pyroclasts experienced

Intra-flow morphology variations within a single submarine flow: the 2005-2006 East Pacific Rise eruption

NASA Astrophysics Data System (ADS)

Fundis, A. T.; Soule, S.; Fornari, D. J.; Perfit, M. R.

2009-12-01

The 2005-2006 eruption near 9°50‧N marked the first observed repeat eruption at a mid-ocean ridge and provided a unique opportunity to deduce the emplacement dynamics of a single eruptive event. Since this new flow was documented in April 2006, a total of 41 deep-towed imaging surveys have been conducted with the Woods Hole Oceanographic Institution’s (WHOI) TowCam system. These surveys collected more than 60,000 digital color images and high-resolution (+ 10 cm) bathymetric profiles. We have analyzed the surface morphology of the flow using this data at a level of detail that has never before been possible. Pre-existing slope has been determined using bathymetric data previously collected with WHOI’s Autonomous Benthic Explorer and 30 kHz Simrad EM300 multibeam system. Our analyses quantify the spatial distributions of lava flow surface morphologies and allow us to investigate how these various morphologies relate to the physical characteristics of the ridge and dynamics of flow emplacement. Images of the 2005-2006 flow from each of the TowCam surveys were analyzed for lava flow morphology, the orientation of flow direction indicators, and for the presence of kipukas, collapse, faults and fissures. Our results support previous studies (Fornari et al., 1998, 2004; Soule et al., 2005) that suggest most of the 2005-2006 flows originated from nearly continuous fissures as discrete flow units and subsequently followed pre-existing bathymetric lows and flow channels away from the AST. These flow channels, found predominantly on the eastern flank of the ridge axis at ~9°50‧N, are primarily composed of transitions between sheet and hackly flows. The flows north of 9°53‧ and south of 9°49‧ are predominantly lobate flows with a high abundance of kipukas (<1 - 5 m diameter). The centers of lava channels that served as distribution pathways during the eruption tend to be characterized by sheet flows, while hackly flows that transition into lobate define the

A One-Year Evaluation of a Free Fissure Sealant Program.

PubMed

M, Bakhtiar; N, Azadi; A, Golkari

2016-12-01

Pit and fissure sealant therapy has been approved as an effective measure in the prevention of occlusal dental caries. Resin based materials are the most common materials used worldwide. A variety of resin based fissure sealants are produced and used. Most of them have been presented with ideal results in research environment. However, their effectiveness in the real life, especially in a mass application program such as Iran's oral health reform plan is not clear. To evaluate the longevity of different fissure sealant applied in Iran's oral health reform plan in Fars Province (south of Iran) after one year. Seven counties were selected. One hundred 6- to 8-year-old school children who had undergone fissure sealant therapy in spring 2015 were randomly selected from each county. Their first molars were examined to evaluate the status of the fissure sealants which were applied one year ago. Data on the type/brand of fissure sealant materials, type and experience of clinicians who applied them, existence of a chair-side assistant, and whether the children were caries-free at the time of fissure sealant application were collected from the existing reports. Data of 1974 teeth from 598 children were used for the final analysis. The effects of type/brand of the material was significant on the final results and remained significant ( p < 0.001) after adjustments for the level of fluoride, urban/rural area, upper/lower jaw, type of clinician who applied the sealant, existence of a chair-side assistant, and child's gender, age, and being caries-free. Many factors affect the success rate of a fissure sealant therapy program. The type/brand of the material remained significantly related to the success rate of the fissure sealant even after adjustments for other influencing factors. In this study, ClinproTM Sealant (3M/ESPE, USA) showed better longevity after one year of application.

Volcanic eruption of the mid-ocean ridge along the East Pacific Rise crest at 9°45-52'N: direct submersible observations of seafloor phenomena associated with an eruption event in April, 1991

USGS Publications Warehouse

Haymon, R.M.; Fornari, D.J.; Von Damm, Karen L.; Lilley, M.D.; Perfit, M.R.; Edmond, J.M.; Shanks, Wayne C.; Lutz, R.A.; Grebmeier, J.M.; Carbotte, S.; Wright, D.; McLaughlin, E.; Smith, M.; Beedle, N.; Olson, E.

1993-01-01

We suggest that, in April, 1991, intrusion of dikes in the eruption area to < 200 m beneath the ASC floor resulted in phase separation of fluids near the tops of the dikes and a large flux of vapor-rich hydrothermal fluids through the overlying rubbly, cavernous lavas. Low salinities and gas-rich compositions of hydrothermal fluids sampled in the eruption area are appropriate for a vapor phase in a seawater system undergoing subcritical liquid-vapor phase separation (boiling) and phase segregation. Hydrothermal fluids streamed directly from fissures and pits that may have been loci of lava drainback and/or hydrovolcanic explosions. These fissures and pits were lined with white mats of a unique fast-growing bacteria that was the only life associated with the brand-new vents. The prolific bacteria, which covered thousands of square meters on the ridge crest and were also abundant in subseafloor voids, may thrive on high levels of gases in the vapor-rich hydrothermal fluids initially escaping the hydrothermal system. White bacterial particulates swept from the seafloor by hydrothermal vents swirled in an unprecedented biogenic ‘blizzard’ up to 50 m above the bottom. The bacterial proliferation of April, 1991 is likely to be a transient bloom that will be checked quickly either by decline of dissolved gas concentrations in the fluids as rapid heat loss brings about cessation of boiling, and/or by grazing as other organisms are re-established in the biologically devastated area.

Fine Mapping and Introgressing a Fissure Resistance Locus

USDA-ARS?s Scientific Manuscript database

Rice (Oryza sativa L.) kernel fissuring is a major concern of both rice producers and millers. Fissures are small cracks in rice kernels that increase breakage among kernels when transported or milled, which decrease the value of processed rice. This study employed molecular gene tagging methods to ...

Sulfur, Chlorine, and Flourine Degassing and Atmospheric Loading by the 1783 - 1784 AD Laki (Skaftar Fires) Eruption in Iceland

NASA Technical Reports Server (NTRS)

Thordarson, T.; Self, S.; Hulsebosch, T.; Oskarsson, N.; McPhie, Jocelyn (Editor)

1996-01-01

The 1783-1784 Laki tholeiitic basalt fissure eruption in Iceland was one of the greatest atmospheric pollution events of the past 250 years, with widespread effects in the northern hemisphere. The degassing history and volatile budget of this event are determined by measurements of pre-eruption and residual contents of sulfur, chlorine, and fluorine in the products of all phases of the eruption. In fissure eruptions such as Laki, degassing occurs in two stages: by explosive activity or lava fountaining at the vents, and from the lava as it flows away from the vents. Using the measured sulfur concentrations in glass inclusions in phenocrysts and in groundmass glasses of quenched eruption products, we calculate that the total accumulative atmospheric mass loading of sulfur dioxide was 122 Mt over a period of 8 months. This volatile release is sufficient to have generated approximately 250 Mt of H2SO4 aerosols, an amount which agrees with an independent estimate of the Laki aerosol yield based on atmospheric turbidity measurements. Most of this volatile mass (approximately 60 wt.%) was released during the first 1.5 months of activity. The measured chlorine and fluorine concentrations in the samples indicate that the atmospheric loading of hydrochloric acid and hydrofluoric acid was approximately 7.0 and 15.0 Mt, respectively. Furthermore, approximately 75% of the volatile mass dissolved by the Laki magma was released at the vents and carried by eruption columns to altitudes between 6 and 13 km. The high degree of degassing at the vents is attributed to development of a separated two-phase flow in the upper magma conduit, and implies that high-discharge basaltic eruptions such as Laki are able to loft huge quantities of gas to altitudes where the resulting aerosols can reside for months, or even 1-2 years. The atmospheric volatile contribution due to subsequent degassing of the Laki lava flow is only 18 wt.% of the total dissolved in the magma, and these emissions were

A One-Year Evaluation of a Free Fissure Sealant Program

PubMed Central

M, Bakhtiar; N, Azadi; A, Golkari

2016-01-01

Statement of Problem: Pit and fissure sealant therapy has been approved as an effective measure in the prevention of occlusal dental caries. Resin based materials are the most common materials used worldwide. A variety of resin based fissure sealants are produced and used. Most of them have been presented with ideal results in research environment. However, their effectiveness in the real life, especially in a mass application program such as Iran’s oral health reform plan is not clear. Objectives: To evaluate the longevity of different fissure sealant applied in Iran’s oral health reform plan in Fars Province (south of Iran) after one year. Materials and Methods: Seven counties were selected. One hundred 6- to 8-year-old school children who had undergone fissure sealant therapy in spring 2015 were randomly selected from each county. Their first molars were examined to evaluate the status of the fissure sealants which were applied one year ago. Data on the type/brand of fissure sealant materials, type and experience of clinicians who applied them, existence of a chair-side assistant, and whether the children were caries-free at the time of fissure sealant application were collected from the existing reports. Results: Data of 1974 teeth from 598 children were used for the final analysis. The effects of type/brand of the material was significant on the final results and remained significant (p < 0.001) after adjustments for the level of fluoride, urban/rural area, upper/lower jaw, type of clinician who applied the sealant, existence of a chair-side assistant, and child’s gender, age, and being caries-free. Conclusions: Many factors affect the success rate of a fissure sealant therapy program. The type/brand of the material remained significantly related to the success rate of the fissure sealant even after adjustments for other influencing factors. In this study, ClinproTM Sealant (3M/ESPE, USA) showed better longevity after one year of application. PMID

Insensitivity of Tree-Ring Growth to Temperature and Precipitation Sharpens the Puzzle of Enhanced Pre-Eruption NDVI on Mt. Etna (Italy)

PubMed Central

Krusic, Paul J.; Tognetti, Roberto; Houlié, Nicolas; Andronico, Daniele; Egli, Markus; D'Arrigo, Rosanne

2017-01-01

On Mt. Etna (Italy), an enhanced Normalized Difference in Vegetation Index (NDVI) signature was detected in the summers of 2001 and 2002 along a distinct line where, in November 2002, a flank eruption subsequently occurred. These observations suggest that pre-eruptive volcanic activity may have enhanced photosynthesis along the future eruptive fissure. If a direct relation between NDVI and future volcanic eruptions could be established, it would provide a straightforward and low-cost method for early detection of upcoming eruptions. However, it is unclear if, or to what extent, the observed enhancement of NDVI can be attributed to volcanic activity prior to the subsequent eruption. We consequently aimed at determining whether an increase in ambient temperature or additional water availability owing to the rise of magma and degassing of water vapour prior to the eruption could have increased photosynthesis of Mt. Etna's trees. Using dendro-climatic analyses we quantified the sensitivity of tree ring widths to temperature and precipitation at high elevation stands on Mt. Etna. Our findings suggest that tree growth at high elevation on Mt. Etna is weakly influenced by climate, and that neither an increase in water availability nor an increase in temperature induced by pre-eruptive activity is a plausible mechanism for enhanced photosynthesis before the 2002/2003 flank eruption. Our findings thus imply that other, yet unknown, factors must be sought as causes of the pre-eruption enhancement of NDVI on Mt. Etna. PMID:28099435

Insensitivity of Tree-Ring Growth to Temperature and Precipitation Sharpens the Puzzle of Enhanced Pre-Eruption NDVI on Mt. Etna (Italy).

PubMed

Seiler, Ruedi; Kirchner, James W; Krusic, Paul J; Tognetti, Roberto; Houlié, Nicolas; Andronico, Daniele; Cullotta, Sebastiano; Egli, Markus; D'Arrigo, Rosanne; Cherubini, Paolo

2017-01-01

On Mt. Etna (Italy), an enhanced Normalized Difference in Vegetation Index (NDVI) signature was detected in the summers of 2001 and 2002 along a distinct line where, in November 2002, a flank eruption subsequently occurred. These observations suggest that pre-eruptive volcanic activity may have enhanced photosynthesis along the future eruptive fissure. If a direct relation between NDVI and future volcanic eruptions could be established, it would provide a straightforward and low-cost method for early detection of upcoming eruptions. However, it is unclear if, or to what extent, the observed enhancement of NDVI can be attributed to volcanic activity prior to the subsequent eruption. We consequently aimed at determining whether an increase in ambient temperature or additional water availability owing to the rise of magma and degassing of water vapour prior to the eruption could have increased photosynthesis of Mt. Etna's trees. Using dendro-climatic analyses we quantified the sensitivity of tree ring widths to temperature and precipitation at high elevation stands on Mt. Etna. Our findings suggest that tree growth at high elevation on Mt. Etna is weakly influenced by climate, and that neither an increase in water availability nor an increase in temperature induced by pre-eruptive activity is a plausible mechanism for enhanced photosynthesis before the 2002/2003 flank eruption. Our findings thus imply that other, yet unknown, factors must be sought as causes of the pre-eruption enhancement of NDVI on Mt. Etna.

Ultrasound Fissure Observation: Assessment of Lung by Pleural-Hub Affiliates.

PubMed

Zanforlin, Alessandro; Livi, Vanina; Santoriello, Carlo; Ceruti, Paolo; Trigiani, Marco; Valerio, Manlio; Perani, Cristiano; Carlucci, Paolo; Palmiotti, Antonio; Marchetti, Giampietro

2018-02-22

Lung ultrasound examination is becoming an even more important part of pulmonologists' clinical routine. As indicated in the literature, the coordinates of any findings on lung parenchyma are based on surface landmarks or conventional quadrants. In our experience we have noticed that lung fissures are clearly detectable as interruptions of the pleural line, but this has never been investigated previously. The aim of this study was to evaluate whether lung fissures are detectable under normal conditions in routine clinical practice. Ten operators were enrolled from Pleural-Hub, a scientific discussion group. After compiling a prestudy survey to investigate whether they had observed fissures previously, they were asked to note if the following fissures were detectable: posterior right (PR) and left (PL), lateral right (LR) and left (LL), anterior right (AR), and anterolateral left (AL). Enrollment was competitive, aiming to reach 100 case subjects. We found that general fissure detection was 61.3%, in particular: PR, 59%; LR, 75%; AR, 69%; PL, 45%; LL, 64%; AL, 56%. Single operators yielded different detection rates ranging from 90% to 25%, showing strong operator dependency. Before being made aware of general results operators indicated operator's skill and rib shadow artifacts as the principal factors affecting fissure detection. Lung fissures may be detected with ultrasound once adequate training is provided. This may allow the clinician a more precise anatomical delineation of pathology identified by lung ultrasound. Copyright © 2018 American College of Chest Physicians. Published by Elsevier Inc. All rights reserved.

High-resolution AUV mapping of the 2015 flows at Axial Seamount, Juan de Fuca Ridge

NASA Astrophysics Data System (ADS)

Paduan, J. B.; Chadwick, W. W., Jr.; Clague, D. A.; Le Saout, M.; Caress, D. W.; Thomas, H. J.; Yoerger, D.

2016-12-01

Lava flows erupted in April 2015 at Axial Seamount were mapped at 1-m resolution with the AUV Sentry in August 2015 and the MBARI Mapping AUVs in July 2016 and observed and sampled with ROVs on those same expeditions. Thirty percent of terrain covered by new flows had been mapped by the MBARI AUVs prior to the eruption. Differencing of before and after maps (using ship-collected bathymetry where the AUV had not mapped before) allows calculation of extents and volumes of flows and shows new fissures. The maps reveal unexpected fissure patterns and shifts in the style of flow emplacement through a single eruption. There were 11 separate flows totaling 1.48 x 108 m3 of lava erupted from numerous en echelon fissures over 19 km on the NE caldera floor, on the NE flank, and down the N rift zone. Flows in and around the caldera have maximum thicknesses of 5-19 m. Most erupted as sheet flows and spread along intricate channels that terminated in thin margins. Some utilized pre-existing fissures. Some flows erupted from short fissures, while at least two longer new fissures produced little or no lava. A flow on the upper N rift has a spectacular lava channel flanked by narrow lava pillars supporting a thin roof left after the flow drained. A shatter ring still emanating warm fluid is visible in the map as a 15-m wide low cone. Hundreds of exploded pillows were observed but are not discernable in the bathymetry. The northern-most three flows deep on the N rift are similar in area to the others but comprise the bulk of the eruption volume. Differencing of ship-based bathymetry shows only these flows. Near the eruptive fissures they are sheet flows, but as they flowed downslope they built complexes of coalesced pillow mounds up to 67-128 m thick. Changes in flow morphology occurred through the course of the eruption. Large pillow mounds had molten cores that deformed as the eruption progressed. One flow began as a thin, effusive sheet flow but as the eruption rate decreased, a

Lateral internal sphincterotomy for surgically recurrent chronic anal fissure.

PubMed

Liang, Jennifer; Church, James M

2015-10-01

Lateral internal sphincterotomy cures chronic anal fissure by preventing internal sphincter hypertonia. However, cutting sphincter predisposes to sphincter dysfunction, manifests as incontinence of gas, liquid, or stool. Surgeons, therefore, can be too cautious in its use, making ineffective superficial incisions or avoiding the operation altogether. This study is designed to confirm the role of redo lateral internal sphincterotomy in the treatment of surgically recurrent chronic anal fissure. Patients undergoing repeat lateral internal sphincterotomy for surgically recurrent chronic anal fissure were accessed from a prospectively maintained database. Chronicity was defined by symptoms persisting more than 3 weeks. Contralateral sphincterotomy was performed with electrocautery through a stab incision over the intersphincteric plane. The length of sphincter division was the same as the length of the fissure. Phone questionnaire was administered and fecal continence was assessed by modified Cleveland Clinic Incontinence Score. Patients were asked to rank their overall satisfaction with the operation, and pre- and postoperative quality of life. There were 57 patients, 24 women and 33 men; mean age was 47.9 ± 14.8 years. Mean follow-up was 12.5 ± 4.2 years (range 6.2 to 25.2 years). Presenting symptoms included pain (100%), bleeding (80%), pruritus ani (39%), constipation (26%), and diarrhea. Fifty patients (90%) presented with 1 fissure, and 40 were posterior. Most procedures were performed on an outpatient basis. Fissure healing rate was 98%, and 2 patients (4%) developed minor incontinence postoperatively (one of gas, the other, gas and seepage). Overall satisfaction was 9.7 ± .9 out of 10 with a significant improvement in the quality of life from 5.7 ± 2.4 out of 10 to 9.3 ± 1.4 out of 10 (P < .001). Judicious repeat lateral sphincterotomy cures recurrent chronic fissures with minimal risk of incontinence. Copyright © 2015 Elsevier Inc. All rights reserved.

Surface anatomy of the pulmonary fissures determined by high-resolution computed tomography.

PubMed

Heřmanová, Zuzana; Ctvrtlík, Filip; Heřman, Miroslav

2012-10-01

The aim of our study was to describe the surface anatomy of the interlobar fissures using volumetric thin-section high-resolution computed tomography (HRCT). Retrospective assessment of HRCT examinations of 250 patients was performed. The localization of the oblique fissures was marked at three sites: posteriorly at its most superior medial limit, laterally in the midaxillary line, and inferiorly at the junction of the middle and lateral thirds of the hemithorax; posteriorly and laterally, this was to the nearest rib whilst inferiorly the position was described in relation to the diaphragm or chest wall. The localization of the horizontal fissure was marked anteriorly in relation to the nearest rib (or costal cartilage) and posteriorly where it intersected with the oblique fissure (superior, middle, or inferior third). Shapes of the fissures and differences between inspiration and expiration were also documented. Descriptive statistics were used to report the most frequent positions. The most frequent localization of the oblique fissure on the left side was posteriorly at the fourth rib (45%), laterally at the sixth rib (52%), and inferiorly in the anterior third of the hemidiaphragm (60%). The right oblique fissure was located posteriorly at the fifth rib (50%), laterally at the sixth rib (50%), and inferiorly in the anterior third of the hemidiaphragm (71%). The horizontal fissure most commonly originated in the middle third of the oblique fissure (61%) and met the anterior thoracic wall at the level of the fourth rib (51%). The most frequent shape of the left oblique fissure was linear (78%), whereas S-shaped and linear configurations (28% each) were most frequent on the right. No difference was found in the surface markings of the fissures between inspiration and expiration in 90% of cases. The considerable individual variation in the position and shape of the interlobar fissures helps to explain the variable descriptions of their surface anatomy in the

Multiple melt bodies fed the AD 2011 eruption of Puyehue-Cordón Caulle, Chile.

PubMed

Alloway, B V; Pearce, N J G; Villarosa, G; Outes, V; Moreno, P I

2015-12-02

Within the volcanological community there is a growing awareness that many large- to small-scale, point-source eruptive events can be fed by multiple melt bodies rather than from a single magma reservoir. In this study, glass shard major- and trace-element compositions were determined from tephra systematically sampled from the outset of the Puyehue-Cordón Caulle (PCC) eruption (~1 km(3)) in southern Chile which commenced on June 4(th), 2011. Three distinct but cogenetic magma bodies were simultaneously tapped during the paroxysmal phase of this eruption. These are readily identified by clear compositional gaps in CaO, and by Sr/Zr and Sr/Y ratios, resulting from dominantly plagioclase extraction at slightly different pressures, with incompatible elements controlled by zircon crystallisation. Our results clearly demonstrate the utility of glass shard major- and trace-element data in defining the contribution of multiple magma bodies to an explosive eruption. The complex spatial association of the PCC fissure zone with the Liquiñe-Ofqui Fault zone was likely an influential factor that impeded the ascent of the parent magma and allowed the formation of discrete melt bodies within the sub-volcanic system that continued to independently fractionate.

Selection for fissure resistance now made possible in early breeding generations

USDA-ARS?s Scientific Manuscript database

Rice kernel fissuring is one of the leading causes of milling yield losses. Any reduction in fissuring can result in direct increases in yield and profit for both producers and millers. While most U.S. rice varieties yield around 55% head rice, the fissure-resistant varieties ‘Cypress’, ‘Saber’ an...

The Ongoing 2011 Eruption of Cordón Caulle (Southern Andes) and its Related Hazards

NASA Astrophysics Data System (ADS)

Amigo, A.; Lara, L. E.; Silva, C.; Orozco, G.; Bertin, D.

2011-12-01

On June 4, 2011, at 18:45 UTC, Cordón Caulle volcano (Southern Andes, 40.52S, 72.14W) erupted explosively after 51 years of quiescence. The last eruption occurred in 1960 and was triggered by the great Mw 9.5 Chile earthquake. The ongoing eruption started after 2 months of increased shallow seismicity as recorded by OVDAS (the volcano observatory at Sernageomin). This close monitoring effort allowed a timely eruption forecast with at least 3 hours of warning, which facilitated the crisis response. In addition to this successful performance, for the first time in Chile volcanic hazards were assessed in advance supporting the emergency management. In particular, tephra dispersal was daily forecasted using the ASHFALL advection-diffusion model and potential lahars and PDC impact zones were delineated according to numerical approaches. The first eruptive stage lasted 27 hours. It was characterized by ca. 15-km strong Plinian-like column, associated with the emission of 0.2 - 0.4 km3 of magma (DRE). Tephra fallout mostly occurred in Chile and Argentina, although fine particles and aerosols circumnavigated the globe twice, causing disruptions on air navigation across the Southern Hemisphere. The second ongoing eruptive stage has been characterized by persistent weak plumes and lava emission at effusion rates in the range of 20 and 60 m3/s, which total volume is estimated <0.20 km3 (at the end of July 2011). Eruptive products have virtually the same bulk composition as those of the historical 1921 and 1960 eruptions, corresponding to phenocryst-poor rhyodacites (67 - 70% SiO2) for what a pre-eruptive temperature of ca. 920C could be inferred. In contrast to the previous eruptive cycles, the ongoing eruption has not evolved (at the time of writing) as a fissure eruption although the vent is atop of fault scarp that borders the Pleistocene-Holocene extensional graben of the Cordón Caulle. This episode is a good case of successful eruption forecast and hazards assessment

Changes in shear-wave splitting before volcanic eruptions

NASA Astrophysics Data System (ADS)

Liu, Sha; Crampin, Stuart

2015-04-01

We have shown that observations of shear-wave splitting (SWS) monitor stress-accumulation and stress-relaxation before earthquakes which allows the time, magnitude, and in some circumstances fault-plane of impending earthquakes to be stress-forecast. (We call this procedure stress-forecasting rather than predicting or forecasting to emphasise the different formalism.) We have stress-forecast these parameters successfully three-days before a 1988 M5 earthquake in SW Iceland, and identified characteristic anomalies retrospectively before ~16 other earthquakes in Iceland and elsewhere. SWS monitors microcrack geometry and shows that microcracks are so closely spaced that they verge on fracturing and earthquakes. Phenomena verging on failure in this way are critical-systems with 'butterfly wings' sensitivity. Such critical-systems are very common. The Earth is an archetypal complex heterogeneous interactive phenomenon and must be expected to be a critical-system. We claim this critical system as a New Geophysics of a critically-microcracked rock mass. Such critical systems impose a range of fundamentally-new properties on conventional sub-critical physics/geophysics, one of which is universality. Consequently it is expected that we observe similar stress-accumulation and stress-relaxation before volcanic eruptions to those before earthquakes. There are three eruptions where appropriate changes in SWS have been observed similar to those observed before earthquakes. These are: the 1996 Gjálp fissure eruption, Vatnajökull, Iceland; a 2001 flank eruption on Mount Etna, Sicily (reported by Francesca Bianco, INGV, Naples); and the 2010 Eyjafjajökull ash-cloud eruption, SW Iceland. These will be presented in the same normalised format as is used before earthquakes. The 1996 Gjálp eruption showed a 2½-month stress-accumulation, and a ~1-year stress-relaxation (attributed to the North Atlantic Ridge adjusting to the magma injection beneath the Vatnajökull Ice Cap). The

Combined treatment approach to chronic anal fissure with associated anal fistula.

PubMed

FitzDowse, Andrew J; Behrenbruch, Corina C; Hayes, Ian P

2017-12-03

Anal fistula in association with chronic anal fissure (fissure-fistula) is infrequently described. Recognizing this association and managing both components may help prevent some treatment failures seen with chronic anal fissure. This study aims to report on the outcomes of 20 consecutive patients with fissure-fistula managed with fistulotomy and injection of botulinum A toxin. The study is a retrospective, observational study, assessing the success of symptom resolution following fistulotomy with botulinum A toxin, in patients identified as having a chronic anal fissure with associated anal fistula. The study included all patients with this condition treated with combination treatment by a single surgeon at a tertiary care hospital between January 2013 and January 2016. Twenty patients with fissure-fistula treated with fistulotomy and botulinum toxin A were identified. The median cohort age was 44 years (range 25-78), with a predominance of males (80%) and posterior fissure position (80%). The most common presenting symptoms were anal pain (70%), rectal bleeding (55%), anal discharge (35%) and anal pruritus (35%). Mean follow-up was 10.5 weeks and all patients who attended follow-up appointments reported resolution of symptoms. There were no cases of incontinence and none of the cohort required further surgical intervention for the condition. Chronic anal fissure with associated anal fistula can be successfully managed with fistulotomy and injection of botulinum toxin A. Further studies would be helpful in determining if recognition and management of the fistula component in isolation with fistulotomy is as effective as fistulotomy plus botulinum A toxin. © 2017 Royal Australasian College of Surgeons.

Implications of ground-deformation measurements across earth fissures in subsidence areas in the southwestern USA

USGS Publications Warehouse

Holzer, Thomas L.

2010-01-01

Ground deformation was monitored at earth fissures in areas of land subsidence induced by groundwater extraction in the southwestern United States. The ground deformation is consistent with the mechanism that fissures are caused by horizontal strains generated by bending of overburden in response to localized differential compaction. Subsidence profiles indicated that localized differential subsidence occurred across the fissures and that maximum convex-upward curvature was at the fissure. The overall shape of the profile stayed similar with time, and maximum curvature remained stationary at the fissure. Horizontal displacements were largest near the fissure, and generally were small to negligible away from the fissure. Maximum tensile horizontal strains were at the fissure and coincided with maximum curvature in the subsidence profiles. Horizontal tensile strain continued to accumulate at fissures after they formed with rates of opening ranging from 30 to 120 microstrain/year at fissures in Arizona.

Groundwater-Mining-Induced Subsidence and Earth Fissures in Cedar Valley, Southwestern Utah

NASA Astrophysics Data System (ADS)

Knudsen, T. R.; Inkenbrandt, P.; Lund, W. R.; Lowe, M.; Bowman, S. D.

2014-12-01

Groundwater pumping in excess of recharge (groundwater mining) has lowered the potentiometric surface in Cedar Valley, southwestern Utah, by as much as 114 feet since 1939. Lowering the potentiometric surface (head decline) has caused permanent compaction of fine-grained sediments of the Cedar Valley aquifer. Recently acquired interferometric synthetic aperture radar (InSAR) imagery shows that land subsidence is occurring over an ~100 square-mile area, including two pronounced subsidence bowls in the northeastern (Enoch graben) and southwestern (Quichapa Lake area) parts of the valley. A lack of accurate historical benchmark elevation data over much of the valley prevents detailed long-term quantification of subsidence. In response to the land subsidence, earth fissures have formed along the margins of the Enoch graben and north and west of Quichapa Lake. Our initial inventory of Cedar Valley fissures, which relied on aerial-photography analysis, identified 3.9 miles of fissures in 2009. With newly acquired light detection and ranging (LiDAR) coverage in 2011, we more than doubled the total length of mapped fissures to 8.3 miles. Fissures on the west side of the Enoch graben exhibit ongoing vertical surface displacement with rates as high as 1.7 inches/year. The largest Enoch-graben-west fissure has displaced street surfaces, curb and gutter, and sidewalks, and has reversed the flow direction of a sewer line in a partially developed subdivision. Several Cedar Valley fissures are closely associated with, and in some places coincident with, mapped Quaternary faults. While the majority of Cedar Valley fissures are mapped in agricultural areas, continued groundwater mining and resultant subsidence will likely cause existing fissures to lengthen and new fissures to form that may eventually impact other developed areas of the valley.

Spatial and Temporal Analysis of Eruption Locations, Compositions, and Styles in Northern Harrat Rahat, Kingdom of Saudi Arabia

NASA Astrophysics Data System (ADS)

Dietterich, H. R.; Stelten, M. E.; Downs, D. T.; Champion, D. E.

2017-12-01

Harrat Rahat is a predominantly mafic, 20,000 km2 volcanic field in western Saudi Arabia with an elongate volcanic axis extending 310 km north-south. Prior mapping suggests that the youngest eruptions were concentrated in northernmost Harrat Rahat, where our new geologic mapping and geochronology reveal >300 eruptive vents with ages ranging from 1.2 Ma to a historic eruption in 1256 CE. Eruption compositions and styles vary spatially and temporally within the volcanic field, where extensive alkali basaltic lavas dominate, but more evolved compositions erupted episodically as clusters of trachytic domes and small-volume pyroclastic flows. Analysis of vent locations, compositions, and eruption styles shows the evolution of the volcanic field and allows assessment of the spatio-temporal probabilities of vent opening and eruption styles. We link individual vents and fissures to eruptions and their deposits using field relations, petrography, geochemistry, paleomagnetism, and 40Ar/39Ar and 36Cl geochronology. Eruption volumes and deposit extents are derived from geologic mapping and topographic analysis. Spatial density analysis with kernel density estimation captures vent densities of up to 0.2 %/km2 along the north-south running volcanic axis, decaying quickly away to the east but reaching a second, lower high along a secondary axis to the west. Temporal trends show slight younging of mafic eruption ages to the north in the past 300 ka, as well as clustered eruptions of trachytes over the past 150 ka. Vent locations, timing, and composition are integrated through spatial probability weighted by eruption age for each compositional range to produce spatio-temporal models of vent opening probability. These show that the next mafic eruption is most probable within the north end of the main (eastern) volcanic axis, whereas more evolved compositions are most likely to erupt within the trachytic centers further to the south. These vent opening probabilities, combined with

Transperineal sonographic anal sphincter complex evaluation in chronic anal fissures.

PubMed

Bedair, Elsaid M; El Hennawy, Hany M; Moustafa, Ahmed Abdu; Meki, Gad Youssef; Bosat, Bosat Elwany

2014-11-01

The purpose of this study was to assess the role of transperineal sonography in assessment of pathologic changes to the anal sphincter complex in patients with chronic anal fissures. We conducted a prospective case-control study of 100 consecutive patients of any age and both sexes with chronic anal fissures who presented to a colorectal clinic between January 2012 and August 2013 (group A) and 50 healthy volunteers (group B). The most common patterns of radiologic changes to anal sphincters associated with chronic anal fissures were circumferential thickening of the anal sphincter complex in 5 patients (5%), circumferential thickening of the internal anal sphincter in 3 patients (3%), preferential thickening of the internal anal sphincter at the 6-o'clock position in 80 patients (80%) and the 12-o'clock position in 7 patients (7%), preferential thickening of the internal and external anal sphincters in 3 patients (3%), and thinning of the internal anal sphincter in 2 patients (2%). Chronic anal fissures cause differential thickening of both internal and external anal sphincters, with a trend toward increased thickness in relation to the site of the fissure. Routine preoperative transperineal sonography for patients with chronic anal fissures is recommended, and it is mandatory in high-risk patients. © 2014 by the American Institute of Ultrasound in Medicine.

Sulfur, chlorine, and fluorine degassing and atmospheric loading by the 1783 1784 AD Laki (Skaftár Fires) eruption in Iceland

NASA Astrophysics Data System (ADS)

Thordarson, T.; Self, S.; Óskarsson, N.; Hulsebosch, T.

1996-09-01

The 1783 1784 Laki tholeiitic basalt fissure eruption in Iceland was one of the greatest atmospheric pollution events of the past 250 years, with widespread effects in the northern hemisphere. The degassing history and volatile budget of this event are determined by measurements of pre-eruption and residual contents of sulfur, chlorine, and fluorine in the products of all phases of the eruption. In fissure eruptions such as Laki, degassing occurs in two stages: by explosive activity or lava fountaining at the vents, and from the lava as it flows away from the vents. Using the measured sulfur concentrations in glass inclusions in phenocrysts and in groundmass glasses of quenched eruption products, we calculate that the total accumulative atmospheric mass loading of sulfur dioxide was 122 Mt over a period of 8 months. This volatile release is sufficient to have generated ˜250 Mt of H2SO4 aerosols, an amount which agrees with an independent estimate of the Laki aerosol yield based on atmospheric turbidity measurements. Most of this volatile mass (˜60 wt.%) was released during the first 1.5 months of activity. The measured chlorine and fluorine concentrations in the samples indicate that the atmospheric loading of hydrochloric acid and hydrofluoric acid was ˜7.0 and 15.0 Mt, respectively. Furthermore, ˜75% of the volatile mass dissolved by the Laki magma was released at the vents and carried by eruption columns to altitudes between 6 and 13 km. The high degree of degassing at the vents is attributed to development of a separated two-phase flow in the upper magma conduit, and implies that high-discharge basaltic eruptions such as Laki are able to loft huge quantities of gas to altitudes where the resulting aerosols can reside for months or even 1 2 years. The atmospheric volatile contribution due to subsequent degassing of the Laki lava flow is only 18 wt.% of the total dissolved in the magma, and these emissions were confined to the lowest regions of the

A Case Series of Anal Carcinoma Misdiagnosed as Idiopathic Chronic Anal Fissure.

PubMed

Barbeiro, Sandra; Atalaia-Martins, Catarina; Marcos, Pedro; Gonçalves, Cláudia; Cotrim, Isabel; Vasconcelos, Helena

2017-09-01

Chronic anal fissure is a linear ulcer in the anal canal that has not cicatrized for more than 8-12 weeks of treatment. Most anal fissures are idiopathic and are located in the posterior midline. Squamous cell carcinoma of the anus commonly presents as bleeding and anal pain. It may also present as a mass, nonhealing ulcer, itching, discharge, fecal incontinence and fistulae. Not uncommonly, small and early cancers are misdiagnosed as benign anorectal disorders like anal fissures or hemorrhoids. The clinical suspicion of squamous cell carcinoma of the anus is of paramount importance in patients with nonhealing anal fissures, fissures in atypical positions or with indurated or ulcerated anal tags and in patients with risk factors for the development of anal squamous intraepithelial lesions that are precursors of invasive anal squamous cell carcinoma. The authors present 3 cases of squamous cell carcinoma of the anus initially misdiagnosed as benign chronic anal fissure.

Sustained eruptions on Enceladus explained by turbulent dissipation in tiger stripes

NASA Astrophysics Data System (ADS)

Kite, Edwin S.; Rubin, Allan M.

2016-04-01

Spacecraft observations suggest that the plumes of Saturn’s moon Enceladus draw water from a subsurface ocean, but the sustainability of conduits linking ocean and surface is not understood. Observations show eruptions from “tiger stripe” fissures that are sustained (although tidally modulated) throughout each orbit, and since the 2005 discovery of the plumes. Peak plume flux lags peak tidal extension by ˜1 rad, suggestive of resonance. Here, we show that a model of the tiger stripes as tidally flexed slots that puncture the ice shell can simultaneously explain the persistence of the eruptions through the tidal cycle, the phase lag, and the total power output of the tiger stripe terrain, while suggesting that eruptions are maintained over geological timescales. The delay associated with flushing and refilling of O(1)-m-wide slots with ocean water causes erupted flux to lag tidal forcing and helps to buttress slots against closure, while tidally pumped in-slot flow leads to heating and mechanical disruption that staves off slot freezeout. Much narrower and much wider slots cannot be sustained. In the presence of long-lived slots, the 106-y average power output of the tiger stripes is buffered by a feedback between ice melt-back and subsidence to O(1010) W, which is similar to observed power output, suggesting long-term stability. Turbulent dissipation makes testable predictions for the final flybys of Enceladus by Cassini. Our model shows how open connections to an ocean can be reconciled with, and sustain, long-lived eruptions. Turbulent dissipation in long-lived slots helps maintain the ocean against freezing, maintains access by future Enceladus missions to ocean materials, and is plausibly the major energy source for tiger stripe activity.

Conditions of Fissuring in a Pumped-Faulted Aquifer System

NASA Astrophysics Data System (ADS)

Hernandez-Marin, M.; Burbey, T. J.

2007-12-01

Earth fissuring associated with subsidence from groundwater pumping is problematic in many arid-zone heavily pumped basins such as Las Vegas Valley. Long-term pumping at rates considerably greater than the natural recharge rate has stressed the heterogeneous aquifer system resulting in a complex stress-strain regime. A rigorous artificial recharge program coupled with increased surface-water importation has allowed water levels to appreciably recover, which has led to surface rebound in some localities. Nonetheless, new fissures continue to appear, particularly near basin-fill faults that behave as barriers to subsidence bowls. The purpose of this research is to develop a series of computational models to better understand the influence that structure (faults), pumping, and hydrostratigraphy has in the generation and propagation of fissures. The hydrostratigraphy of Las Vegas Valley consists of aquifers, aquitards and a relatively dry vadoze zone that may be as thick as 100m in much of the valley. Quaternary faults are typically depicted as scarps resulting from pre- pumping extensional tectonic events and are probably not responsible for the observed strain. The models developed to simulate the stress-strain and deformation processes in a faulted pumped aquifer-aquitard system of Las Vegas use the ABAQUS CAE (Complete ABAQUS Environment) software system. ABAQUS is a sophisticated engineering industry finite-element modeling package capable of simulating the complex fault- fissure system described here. A brittle failure criteria based on the tensile strength of the materials and the acting stresses (from previous models) are being used to understand how and where fissures are likely to form. , Hypothetical simulations include the role that faults and the vadose zone may play in fissure formation

The eruptive history and magmatic evolution of Aluto volcano: new insights into silicic peralkaline volcanism in the Ethiopian rift

NASA Astrophysics Data System (ADS)

Hutchison, William; Pyle, David M.; Mather, Tamsin A.; Yirgu, Gezahegn; Biggs, Juliet; Cohen, Benjamin E.; Barfod, Dan N.; Lewi, Elias

2016-12-01

The silicic peralkaline volcanoes of the East African Rift are some of the least studied volcanoes on Earth. Here we bring together new constraints from fieldwork, remote sensing, geochronology and geochemistry to present the first detailed account of the eruptive history of Aluto, a restless silicic volcano located in a densely populated section of the Main Ethiopian Rift. Prior to the growth of the Aluto volcanic complex (before 500 ka) the region was characterized by a significant period of fault development and mafic fissure eruptions. The earliest volcanism at Aluto built up a trachytic complex over 8 km in diameter. Aluto then underwent large-volume ignimbrite eruptions at 316 ± 19 ka and 306 ± 12 ka developing a 42 km2 collapse structure. After a hiatus of 250 ka, a phase of post-caldera volcanism initiated at 55 ± 19 ka and the most recent eruption of Aluto has a radiocarbon age of 0.40 ± 0.05 cal. ka BP. During this post-caldera phase highly-evolved peralkaline rhyolite lavas, ignimbrites and pumice fall deposits have erupted from vents across the complex. Geochemical modelling is consistent with rhyolite genesis from protracted fractionation (> 80%) of basalt that is compositionally similar to rift-related basalts found east of the complex. Based on the style and volume of recent eruptions we suggest that silicic eruptions occur at an average rate of 1 per 1000 years, and that future eruptions of Aluto will involve explosive emplacement of localised pumice cones and effusive obsidian coulees of volumes in the range 1-100 × 106 m3.

Monitoring of the Ground Fissure Activity Within Yuncheng Basin by Time Series Insar

NASA Astrophysics Data System (ADS)

Zhang, F.; Yang, C. S.; Zhao, C. Y.; Liu, R. C.

2018-04-01

Yuncheng area is one of the most extensive distributions of ground fissures in Shanxi basin, especially in Yanhu District of Yuncheng, the disaster of ground fissures and ground subsidence are the most serious. According to previous studies, the development and distribution of the ground fissures in this area are mainly controlled by the underlying active faults. In order to provide a better understanding of the formation mechanism, the deformation of ground fissures and its surrounding environment should be taken into consideration. In this paper, PS-InSAR technology was employed to assess the time-series ground deformation of Yuncheng ground fissures and its surrounding area with X-band TerraSAR images from 2013 to 2015. The interaction between ground fissures activity and land subsidence, groundwater, precipitation and surrounding faults will be discussed.

The immediate and long-term effects of invasive and noninvasive pit and fissure sealing techniques on the microflora in occlusal fissures of human teeth.

PubMed

Kramer, P F; Zelante, F; Simionato, M R

1993-01-01

The purpose of this study was to evaluate the effect of acid conditioning and occlusal sealant on microbial colonization of pit and fissures submitted to ameloplasty or left intact. Human enamel blocks containing fissures prepared from the occlusal surfaces of unerupted third molars were implanted in occlusal fillings in molars of 12 patients for seven, 30, 60, and 120 days. After seven days of exposure to the oral environment, the pit and fissure blocks were removed and found to be colonized, mainly with gram-positive coccal flora. The acid-etching procedure itself reduced the number of cultivable microorganisms by about 95%. Subsequent application of occlusal sealant caused a gradual decrease of the remaining viable microorganism throughout the experiment. Despite the decrease of 100% after acid etching in most of the fissures submitted to ameloplasty, the occlusal sealant did not lead to a subsequent significant reduction.

Shifts in the eruptive styles at Stromboli in 2010-2014 revealed by ground-based InSAR data.

PubMed

Di Traglia, Federico; Battaglia, Maurizio; Nolesini, Teresa; Lagomarsino, Daniela; Casagli, Nicola

2015-09-01

Ground-Based Interferometric Synthetic Aperture Radar (GBInSAR) is an efficient technique for capturing short, subtle episodes of conduit pressurization in open vent volcanoes like Stromboli (Italy), because it can detect very shallow magma storage, which is difficult to identify using other methods. This technique allows the user to choose the optimal radar location for measuring the most significant deformation signal, provides an exceptional geometrical resolution, and allows for continuous monitoring of the deformation. Here, we present and model ground displacements collected at Stromboli by GBInSAR from January 2010 to August 2014. During this period, the volcano experienced several episodes of intense volcanic activity, culminated in the effusive flank eruption of August 2014. Modelling of the deformation allowed us to estimate a source depth of 482 ± 46 m a.s.l. The cumulative volume change was 4.7 ± 2.6 × 10(5) m(3). The strain energy of the source was evaluated 3-5 times higher than the surface energy needed to open the 6-7 August eruptive fissure. The analysis proposed here can help forecast shifts in the eruptive style and especially the onset of flank eruptions at Stromboli and at similar volcanic systems (e.g. Etna, Piton de La Fournaise, Kilauea).

Monitoring on Xi'an ground fissures deformation with TerraSAR-X data

USGS Publications Warehouse

Zhao, C.; Zhang, Q.; Zhu, W.; Lu, Z.

2012-01-01

Owing to the fine resolution of TerraSAR-X data provided since 2007, this paper applied 6 TerraSAR data (strip mode) during 3rd Dec. 2009 to 23rd Mar. 2010 to detect and monitor the active fissures over Xi'an region. Three themes have been designed for high precision detection and monitoring of Xi'an-Chang'an fissures, as small baseline subsets (SBAS) to test the atmospheric effects of differential interferograms pair stepwise, 2-pass differential interferogram with very short baseline perpendicular to generate the whole deformation map with 44 days interval, and finally, corner reflector (CR) technique was used to closely monitor the relative deformation time series between two CRs settled crossing two ground fissures. Results showed that TerraSAR data are a good choice for small-scale ground fissures detection and monitoring, while special considerations should be taken for their great temporal and baseline decorrelation. Secondly, ground fissures in Xi'an were mostly detected at the joint section of stable and deformable regions. Lastly, CR-InSAR had potential ability to monitor relative deformation crossing fissures with millimeter precision.

Chronology of the 2014 volcanic eruption on the island of Fogo, Cape Verde

NASA Astrophysics Data System (ADS)

Silva, Sónia; Cardoso, Nadir; Alfama, Vera; Cabral, Jeremias; Semedo, Helio; Pérez, Nemesio M.; Dionis, Samara; Hernández, Pedro A.; Barrancos, José; Melián, Gladys V.; Pereira, José Manuel; Rodríguez, Fátima

2015-04-01

Twenty seven historical eruptions have ocurred at Fogo Island since its discovery and settlement (Ribeiro, 1960; Torres et al., 1997). This summary covers the events of the 27th eruption, which started on November 23, 2014, in Cha das Caldeiras, Fogo Island, along a NNE-SSW fissure on the east flank of the 1995 Pico Novo vent with the appearance of four eruptive vents and emissions of gases, pyroclastic rocks and lava. The eruptive column reached an estimated altitude of 6000 m, with aa lavas spilled over and ash fall in Cha das Caldeiras and other locations in the islands of Fogo and Brava (which lies 17km from Fogo). The Hawaiian style fissural stage originated about seven craters with gas and lava emission, that formed two lava flows of aa and pahoehoe style who started the destruction of Portela village, with average speeds of 1-3 meters/hour to 8-10 meters/hour with faster paces up to 1 meter/3 minutes, with thicknesses ranging between 1.5 meters to 10 meters, and temperatures of around 800 ° C. The Strombolian stage, gave rise to a main crater (from the coalescence of small craters) and three small craters or emmision vents, which released aa lava flows with development of lava fronts from one or two lava tubes at the base of the volcanic cone which also reached maximum lengths of 300 to 500 meters at estimated speeds of 20-30 meters/minute to 8-10 meters/minute, that destroyed the Portela and Bangaeira villages. Loud explosions and strong rumbling was also heard at the eruption site. A pahoehoe lava flow developed to the Ilhéu de Losna site, at an average speed of 1 meter/2minutes and a width of about 3 m which was divided into two fronts (north and south of this location) having buried all crop fields (vineyards and other crops) and some houses. The eruption is ongoing in the main vent, with the emission of gases and ash (dark color fumaroles), scorias, spatter and ballistics up to 30-40 feet high, forming eruptive columns with height of 200-1000 meters

Automatic segmentation of pulmonary fissures in x-ray CT images using anatomic guidance

NASA Astrophysics Data System (ADS)

Ukil, Soumik; Sonka, Milan; Reinhardt, Joseph M.

2006-03-01

The pulmonary lobes are the five distinct anatomic divisions of the human lungs. The physical boundaries between the lobes are called the lobar fissures. Detection of lobar fissure positions in pulmonary X-ray CT images is of increasing interest for the early detection of pathologies, and also for the regional functional analysis of the lungs. We have developed a two-step automatic method for the accurate segmentation of the three pulmonary fissures. In the first step, an approximation of the actual fissure locations is made using a 3-D watershed transform on the distance map of the segmented vasculature. Information from the anatomically labeled human airway tree is used to guide the watershed segmentation. These approximate fissure boundaries are then used to define the region of interest (ROI) for a more exact 3-D graph search to locate the fissures. Within the ROI the fissures are enhanced by computing a ridgeness measure, and this is used as the cost function for the graph search. The fissures are detected as the optimal surface within the graph defined by the cost function, which is computed by transforming the problem to the problem of finding a minimum s-t cut on a derived graph. The accuracy of the lobar borders is assessed by comparing the automatic results to manually traced lobe segments. The mean distance error between manually traced and computer detected left oblique, right oblique and right horizontal fissures is 2.3 +/- 0.8 mm, 2.3 +/- 0.7 mm and 1.0 +/- 0.1 mm, respectively.

Morbidity associated with treatment of chronic anal fissure

PubMed Central

Latif, Ansar; Ansar, Anila; Butt, Muhammad Qasim

2013-01-01

Objective: To assess the effectiveness of different modes of treatment of chronic anal fissure as regards improvement of symptoms and complications. Methods: This prospective study included 129 consecutive patients with chronic anal fissures presented to the Surgical Outpatients’ Department of Islam Teaching Hospital Sialkot, Pakistan; from September 2010 to November 2012. Patients were distributed in three groups. In “OBG group”, patients had attended Gynae/Obs OPD and got treated and were then referred to surgical OPD for failure of treatment or recurrence. Patients who presented with history of treatment by GPs were included in “GP Group” “SGR Group” included those who directly reported to surgical OPD for treatment. Patients were managed both pharmacologically as OPD patients and surgically as admitted patients. Patients were instructed to apply small amounts of 0.2% GTN paste in soft white paraffin, to the anoderm with finger tips three times a day. Patients were evaluated at two-week intervals and at each visit the symptoms control, adverse effects and fissure status were recorded. If there was symptomatic relief or the fissure healing was in progress, the treatment was continued for a total duration of eight weeks. Operated patients were nursed in wards after surgery i.e Internal Anal Sphicterotomy. They were advised to report to OPD weekly for one month or earlier if they experienced any symptoms suggestive of complications. Patients were declared cured in case of complete symptomatic relief with fissure healing. Success, failure and associated problems were recorded and analysed to get results. Results:This study included 129 patients who could be followed up for a minimum of three months. These patients were referred by gynaecologist i.e. 22 (17%) for treatment failure while 5 patients with wrong diagnosis were not included in statistical analysis; similarly 41 (32%) patients were referred by general practitioners and 9 patients with wrong

Voluminous lava-like precursor to a major ash-flow tuff: Low-column pyroclastic eruption of the Pagosa Peak Dacite, San Juan volcanic field, Colorado

USGS Publications Warehouse

Bachmann, Olivier; Dungan, M.A.; Lipman, P.W.

2000-01-01

The Pagosa Peak Dacite is an unusual pyroclastic deposit that immediately predated eruption of the enormous Fish Canyon Tuff (~5000 km3) from the La Garita caldera at 28 Ma. The Pagosa Peak Dacite is thick (to 1 km), voluminous (>200 km3), and has a high aspect ratio (1:50) similar to those of silicic lava flows. It contains a high proportion (40-60%) of juvenile clasts (to 3-4 m) emplaced as viscous magma that was less vesiculated than typical pumice. Accidental lithic fragments are absent above the basal 5-10% of the unit. Thick densely welded proximal deposits flowed rheomorphically due to gravitational spreading, despite the very high viscosity of the crystal-rich magma, resulting in a macroscopic appearance similar to flow-layered silicic lava. Although it is a separate depositional unit, the Pagosa Peak Dacite is indistinguishable from the overlying Fish Canyon Tuff in bulk-rock chemistry, phenocryst compositions, and 40Ar/39Ar age. The unusual characteristics of this deposit are interpreted as consequences of eruption by low-column pyroclastic fountaining and lateral transport as dense, poorly inflated pyroclastic flows. The inferred eruptive style may be in part related to synchronous disruption of the southern margin of the Fish Canyon magma chamber by block faulting. The Pagosa Peak eruptive sources are apparently buried in the southern La Garita caldera, where northerly extensions of observed syneruptive faults served as fissure vents. Cumulative vent cross-sections were large, leading to relatively low emission velocities for a given discharge rate. Many successive pyroclastic flows accumulated sufficiently rapidly to weld densely as a cooling unit up to 1000 m thick and to retain heat adequately to permit rheomorphic flow. Explosive potential of the magma may have been reduced by degassing during ascent through fissure conduits, leading to fracture-dominated magma fragmentation at low vesicularity. Subsequent collapse of the 75 x 35 km2 La Garita

The effect of normal pulsed Nd-YAG laser irradiation on pits and fissures in human teeth.

PubMed

Bahar, A; Tagomori, S

1994-01-01

The effects of normal pulsed Nd-YAG laser irradiation on the acid resistance of human dental enamel of pits and fissures, the cleaning of the pit and fissure contents and fluoride uptake into deep pits and fissures were examined. The acid resistance of the pit and fissure enamel was evaluated by the amount of dissolved calcium per square millimeter of the surface area. The pit and fissure enamel treated with laser irradiation obtained an acid resistance 30% higher than that of the unlased controls. The cleaning effect of laser irradiation on the pit and fissure contents was compared with chemicomechanical and mechanical methods. The laser irradiation was found to clean the pits and fissures to a greater depth without alterating the shape of pits and fissures, compared with the other two methods. The distribution of calcium, phosphorus and fluoride in the enamel of the pits and fissures was then measured by electron probe microanalyzer. At the entrance and in the deep part of the pits and fissures, the fluoride content of the enamel treated with acidulated phosphate fluoride after laser irradiation was higher than that of the enamel treated with acidulated phosphate fluoride alone. These results thus suggest that Nd-YAG laser irradiation might be effective in increasing the acid resistance of the pit and fissure enamel, while removing the pit and fissure debris contents and increasing the fluoride uptake into the pit and fissure enamel.

Shifts in the eruptive styles at Stromboli in 2010–2014 revealed by ground-based InSAR data

USGS Publications Warehouse

Di Traglia, Federico; Battaglia, Maurizio; Nolesini, Teresa; Lagomarsino, Daniela; Casaglia, Nicola

2015-01-01

Ground-Based Interferometric Synthetic Aperture Radar (GBInSAR) is an efficient technique for capturing short, subtle episodes of conduit pressurization in open vent volcanoes like Stromboli (Italy), because it can detect very shallow magma storage, which is difficult to identify using other methods. This technique allows the user to choose the optimal radar location for measuring the most significant deformation signal, provides an exceptional geometrical resolution, and allows for continuous monitoring of the deformation. Here, we present and model ground displacements collected at Stromboli by GBInSAR from January 2010 to August 2014. During this period, the volcano experienced several episodes of intense volcanic activity, culminated in the effusive flank eruption of August 2014. Modelling of the deformation allowed us to estimate a source depth of 482 ± 46 m a.s.l. The cumulative volume change was 4.7 ± 2.6 × 105 m3. The strain energy of the source was evaluated 3–5 times higher than the surface energy needed to open the 6–7 August eruptive fissure. The analysis proposed here can help forecast shifts in the eruptive style and especially the onset of flank eruptions at Stromboli and at similar volcanic systems (e.g. Etna, Piton de La Fournaise, Kilauea).

Petrology of lavas from episodes 2-47 of the Puu Oo eruption of Kilauea Volcano, Hawaii: Evaluation of magmatic processes

USGS Publications Warehouse

Garcia, M.O.; Rhodes, J.M.; Wolfe, E.W.; Ulrich, G.E.; Ho, R.A.

1992-01-01

The Puu Oo eruption of Kilauea Volcano in Hawaii is one of its largest and most compositionally varied historical eruptions. The mineral and whole-rock compositions of the Puu Oo lavas indicate that there were three compositionally distinct magmas involved in the eruption. Two of these magmas were differentiated (<6.8 wt% MgO) and were apparently stored in the rift zone prior to the eruption. A third, more mafic magma (9-10 wt% MgO) was probably intruded as a dike from Kilauea's summit reservoir just before the start of the eruption. Its intrusion forced the other two magmas to mix, forming a hybrid that erupted during the first three eruptive episodes from a fissure system of vents. A new hybrid was erupted during episode 3 from the vent where Puu Oo later formed. The composition of the lava erupted from this vent became progressively more mafic over the next 21 months, although significant compositional variation occurred within some eruptive episodes. The intra-episode compositional variation was probably due to crystal fractionation in the shallow (0.0-2.9 km), dike-shaped (i.e. high surface area/volume ratio) and open-topped Puu Oo magma reservoir. The long-term compositional variation was controlled largely by mixing the early hybrid with the later, more mafic magma. The percentage of mafic magma in the erupted lava increased progressively to 100% by episode 30 (about two years after the eruption started). Three separate magma reservoirs were involved in the Puu Oo eruption. The two deeper reservoirs (3-4 km) recharged the shallow (0.4-2.9 km) Puu Oo reservoir. Recharge of the shallow reservoir occurred rapidly during an eruption indicating that these reservoirs were well connected. The connection with the early hybrid magma body was cut off before episode 30. Subsequently, only mafic magma from the summit reservoir has recharged the Puu Oo reservoir. ?? 1992 Springer-Verlag.

[Diagnosis and surgical treatment of intraparenchymal sylvian fissure meningioma].

PubMed

Zheng, Jian; Wang, Shuo; Zhao, Ji-Zong; Cao, Yong

2009-09-08

To describe the characteristics of patients diagnosed with intraparenchymal sylvian meningioma at our department. A retrospective review was performed over 5 patients with intraparenchymal sylvian fissure meningioma confirmed by histopathology and receiving treatment at our department during January 1997 to September 2008. The mean age was 19.4 years old and there were 3 males and 2 females. On CT scanning, intraparenchymal sylvian meningioma was iso- or slightly hyper-dense masses. On MR imaging, tumors showed iso- or hypo- intense signal on T1WI and hyperintense signal on T2WI. After contrast enhancement, T1-weighted images revealed well-demarcated enhancing masses and intimately associated with the middle cerebral artery and its branches in the sylvian fissure. All the patients underwent craniotomy. As a rare disease with radiographic characteristics similar to those of general meningiomas, intraparenchymal sylvian fissure meningioma does not adhere to the dura matter but adhere to or even encase the middle cerebral artery and its branches in the sylvian fissure. All of the above have differential values. During the surgical procedures, a proper handling of tumor and encompassed main trunk of middle cerebral artery and its branches is crucial to patient prognosis.

Melt inclusion constraints on petrogenesis of the 2014-2015 Holuhraun eruption, Iceland

NASA Astrophysics Data System (ADS)

Hartley, Margaret E.; Bali, Enikö; Maclennan, John; Neave, David A.; Halldórsson, Sæmundur A.

2018-02-01

The 2014-2015 Holuhraun eruption, on the Bárðarbunga volcanic system in central Iceland, was one of the best-monitored basaltic fissure eruptions that has ever occurred, and presents a unique opportunity to link petrological and geochemical data with geophysical observations during a major rifting episode. We present major and trace element analyses of melt inclusions and matrix glasses from a suite of ten samples collected over the course of the Holuhraun eruption. The diversity of trace element ratios such as La/Yb in Holuhraun melt inclusions reveals that the magma evolved via concurrent mixing and crystallization of diverse primary melts in the mid-crust. Using olivine-plagioclase-augite-melt (OPAM) barometry, we calculate that the Holuhraun carrier melt equilibrated at 2.1 ± 0.7 kbar (7.5 ± 2.5 km), which is in agreement with the depths of earthquakes (6 ± 1 km) between Bárðarbunga central volcano and the eruption site in the days preceding eruption onset. Using the same approach, melt inclusions equilibrated at pressures between 0.5 and 8.0 kbar, with the most probable pressure being 3.2 kbar. Diffusion chronometry reveals minimum residence timescales of 1-12 days for melt inclusion-bearing macrocrysts in the Holuhraun carrier melt. By combining timescales of diffusive dehydration of melt inclusions with the calculated pressure of H2O saturation for the Holuhraun magma, we calculate indicative magma ascent rates of 0.12-0.29 m s-1. Our petrological and geochemical data are consistent with lateral magma transport from Bárðarbunga volcano to the eruption site in a shallow- to mid-crustal dyke, as has been suggested on the basis of seismic and geodetic datasets. This result is a significant step forward in reconciling petrological and geophysical interpretations of magma transport during volcano-tectonic episodes, and provides a critical framework for the interpretation of premonitory seismic and geodetic data in volcanically active regions.

[Evaluation of the effect of one-step self etching adhesives applied in pit and fissure sealing].

PubMed

Su, Hong-Ru; Xu, Pei-Cheng; Qian, Wen-Hao

2016-06-01

To observe the effect of three one-step self etching adhesive systems used in fit and fissure sealant and explore the feasibility of application in caries prevention in school. Seven hundred and twenty completely erupted mandibular first molars in 360 children aged 7 to 9 years old were chosen. The split-mouth design was used to select one side as the experimental group, divided into A1(Easy One Adper), B1(Adper Easy One), and C1(iBond SE).The contra lateral teeth served as A2,B2 and C2 groups (phosphoric acid). The retention and caries status were regularly reviewed .The clinical effect of the two groups was compared using SPSS19.0 software package for Chi - square test. At 3 and 6 months, pit and fissure sealant retention rate in A1 and A2, B1 and B2,C1 and C2 group had no significant difference. At 12 months, sealant retention in A1 and B1 group was significantly lower than A2 and B2 group (P<0.05). No significant difference was found between C1 and C2 groups (P>0.05). At 24 months, sealant retention rate in A1, B1 and C1 group was significantly lower than A2, B2 and C2 group (P<0.05). The caries rate in A1and A2, B1 and B2, C1 and C2 group had no significant difference during different follow-up time (P>0.05). The clinical anticariogenic effect of three kinds of one-step etching adhesives and phosphoric acid etching sealant was similar .One-step self etching adhesive system was recommended for pit and fissure sealant to improve the students' oral health. The long-term retention rate of one-step self etching adhesive system was lower than the phosphoric acid method to long term observation is needed.

An Investigation of the Morphology of the Petrotympanic Fissure Using Cone-Beam Computed Tomography

PubMed Central

Syriopoulos, Konstantinos; Sens, Rogier L.; Politis, Constantinus

2018-01-01

ABSTRACT Objectives The purpose of the present study was: a) to examine the visibility and morphology of the petrotympanic fissure on cone-beam computed tomography images, and b) to investigate whether the petrotympanic fissure morphology is significantly affected by gender and age, or not. Material and Methods Using Newtom VGi (QR Verona, Italy), 106 cone-beam computed tomography examinations (212 temporomandibular joint areas) of both genders were retrospectively and randomly selected. Two observers examined the images and subsequently classified by consensus the petrotympanic fissure morphology into the following three types: type 1 - widely open; type 2 - narrow middle; type 3 - very narrow/closed. Results The petrotympanic fissure morphology was assessed as type 1, type 2, and type 3 in 85 (40.1%), 72 (34.0%), and 55 (25.9%) cases, respectively. No significant difference was found between left and right petrotympanic fissure morphology (Kappa = 0.37; P < 0.001). Furthermore, no significant difference was found between genders, specifically P = 0.264 and P = 0.211 for the right and left petrotympanic fissure morphology, respectively. However, the ordinal logistic regression analysis showed that males tend to have narrower petrotympanic fissures, in particular OR = 1.58 for right and OR = 1.5 for left petrotympanic fissure. Conclusions The current study lends support to the conclusion that an enhanced multi-planar cone-beam computed tomography yields a clear depiction of the petrotympanic fissure's morphological characteristics. We have found that the morphology is neither gender nor age-related. PMID:29707183

An Investigation of the Morphology of the Petrotympanic Fissure Using Cone-Beam Computed Tomography.

PubMed

Damaskos, Spyros; Syriopoulos, Konstantinos; Sens, Rogier L; Politis, Constantinus

2018-01-01

The purpose of the present study was: a) to examine the visibility and morphology of the petrotympanic fissure on cone-beam computed tomography images, and b) to investigate whether the petrotympanic fissure morphology is significantly affected by gender and age, or not. Using Newtom VGi (QR Verona, Italy), 106 cone-beam computed tomography examinations (212 temporomandibular joint areas) of both genders were retrospectively and randomly selected. Two observers examined the images and subsequently classified by consensus the petrotympanic fissure morphology into the following three types: type 1 - widely open; type 2 - narrow middle; type 3 - very narrow/closed. The petrotympanic fissure morphology was assessed as type 1, type 2, and type 3 in 85 (40.1%), 72 (34.0%), and 55 (25.9%) cases, respectively. No significant difference was found between left and right petrotympanic fissure morphology (Kappa = 0.37; P < 0.001). Furthermore, no significant difference was found between genders, specifically P = 0.264 and P = 0.211 for the right and left petrotympanic fissure morphology, respectively. However, the ordinal logistic regression analysis showed that males tend to have narrower petrotympanic fissures, in particular OR = 1.58 for right and OR = 1.5 for left petrotympanic fissure. The current study lends support to the conclusion that an enhanced multi-planar cone-beam computed tomography yields a clear depiction of the petrotympanic fissure's morphological characteristics. We have found that the morphology is neither gender nor age-related.

Risk factors special to eastern culture for the development of anal fissure.

PubMed

Erel, Serap; Adahan, Didem; Kismet, Kemal; Caylan, Ayse; Tanrikulu, Yusuf; Akkus, Mehmet Ali

2009-01-01

To reveal the effect of diet, bowel functions and toilet habits on the development of anal fissure. One hundred patients complaining of anal fissure were included to the case group; and one hundred age- and gender-matched patients referred for other reasons except for anorectal complaints were included to the control group. The information was obtained by face to face interviews using questionnaires. Statistically significant differences were found in coffee, fruit, and meat consumption between the groups. The patients suffering from anal fissure avoided paprika consumption. The rate of anal fissure incidence was higher in squat toilet users. This study is the first study which evaluates the risk factors such as paprika consumption and squat toilet usage that are specific to Eastern culture. Further studies including large numbers of population are needed to evaluate different risk factors for anal fissure development (Tab. 2, Ref. 11). Full Text (Free, PDF) www.bmj.sk.

21 CFR 872.3765 - Pit and fissure sealant and conditioner.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 21 Food and Drugs 8 2014-04-01 2014-04-01 false Pit and fissure sealant and conditioner. 872.3765 Section 872.3765 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) MEDICAL DEVICES DENTAL DEVICES Prosthetic Devices § 872.3765 Pit and fissure sealant and...

Tephra Blanket Record of a Violent Strombolian Eruption, Sunset Crater, Arizona

NASA Astrophysics Data System (ADS)

Wagner, K. D.; Ort, M. H.

2015-12-01

New fieldwork provides a detailed description of the widespread tephra of the ~1085 CE Sunset Crater eruption in the San Francisco Volcanic Field, Arizona, and refines interpretation of the eruptive sequence. The basal fine-lapilli tephra-fall-units I-IV are considered in detail. Units I and II are massive, with Unit I composed of angular to spiny clasts and II composed of more equant, oxidized clasts. Units III and IV have inversely graded bases and massive tops and are composed of angular to spiny iridescent and mixed iridescent and oxidized angular clasts, respectively. Xenoliths are rare in all units (<0.1%): sedimentary xenoliths are consistent with the known shallow country rock (Moenkopi and Kaibab Fms); magmatic xenoliths are pumiceous rhyolite mingled with basalt. Unit II is less sideromelane rich (20%) than Units I, III, and IV (60-80%). Above these units are at least two more coarse tephra-fall units. Variably preserved ash and fine-lapilli laminae cap the tephra blanket. This deposit is highly susceptible to reworking, and likely experienced both syn- and post-eruptive aeolian redistribution. It appears as either well sorted, alternating planar-parallel beds of ash and fine lapilli with rare wavy beds, or as cross- or planar-bedded ash. The tephra blanket as a whole is stratigraphically underlain by a fissure-fed lava flow and lapilli-fall units are intercalated with two larger flows. Mean grain size is coarsest in Unit I but coarsens in Units II-IV. Units I, III, and IV are moderately to poorly sorted with no skew. Unit II is better sorted and more coarse-skewed. Units I and III are slightly more platykurtic than II and IV. Without considering possible spatial effects introduced by dispersion patterns, bootstrap ANOVA confidence intervals suggest at least Unit II sorting and skewness are from distinct populations. Isopachs indicate Units I and II were associated with a 10-km-long fissure source. After or during Unit II's deposition, activity localized

21 CFR 872.3765 - Pit and fissure sealant and conditioner.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Pit and fissure sealant and conditioner. 872.3765 Section 872.3765 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES... conditioner. (a) Identification. A pit and fissure sealant and conditioner is a device composed of resin, such...

21 CFR 872.3765 - Pit and fissure sealant and conditioner.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 21 Food and Drugs 8 2011-04-01 2011-04-01 false Pit and fissure sealant and conditioner. 872.3765 Section 872.3765 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES... conditioner. (a) Identification. A pit and fissure sealant and conditioner is a device composed of resin, such...

The Hawai`i Supersite: Update and results (Invited)

NASA Astrophysics Data System (ADS)

Poland, M. P.

2013-12-01

The Hawai`i Supersite was initially established in 2008 and was made permanent in 2012. Over the course of its existence, SAR data have been provided to the Supersite by the Canadian, Japanese, European, Italian, and German space agencies. Well over 2000 individual scenes are part of the Hawai`i archive, amounting to nearly 10 TB of raw data. A diversity of ground-based data, including deformation, seismic, and gas emissions, are also part of the Supersite, supplied by the U.S. Geological Survey's Hawaiian Volcano Observatory and collaborators. The availability of such a broad suite of remote and terrestrial data has facilitated numerous explorations into Hawaiian volcanism, including both operational volcano monitoring and scientific investigations. For example, the 5-9 March 2011 Kamoamoa fissure eruption at Kilauea Volcano was tracked by a spatially and temporally dense set of deformation data. Models based on GPS, tilt, and multiple interferogams acquired over the course of the 4-day-long eruption by the ALOS, TerraSAR-X, and COSMO-SkyMed satellites revealed the complexity of dike opening over time and were corroborated by seismic and gas emission measurements. SAR data provided by the Supersite have also enabled views of surface change that are not possible using other means. High-resolution interferograms (3-m pixel size) from TerraSAR-X and COSMO-SkyMed have detected localized, cm-scale subsidence around Kilauea's summit eruptive vent, with increases in rate during periods of vent instability and rim collapse. South of the summit, along the Koa`e fault zone, InSAR data detected deformation due to shallow earthquakes in June 2011 that could only loosely be characterized by vertical deformation from leveling. Along Kilauea's east rift zone, SAR data have proven invaluable in mapping lava flow activity, especially given their all-weather, broad-scale, and high resolution capabilities. Continued contributions of both ground- and space-based data to the Hawai

Early Detection of Eruptive Dykes Revealed by Normalized Difference Vegetation Index (NDVI) on Nyiragongo and Etna Volcanoes: Implications for Dyke Wedge Emplacement, Monitoring, and Risk Assessment.

NASA Astrophysics Data System (ADS)

Komorowski, J.; Houlié, N.; Kasereka, C. M.; Ciraba, H.

2006-12-01

Flank-fissure eruptions involve lateral injection and propagation of magma in a volcanic edifice along pre- existing fractures in the direction of a volcanic rift zone (VRZ) where magma intrusion and lava flow production are concentrated over time. Gradual dyke wedge emplacement on volcano flanks and in VRZ's does not necessarily trigger large amplitude deformation signals susceptible to be recorded months or even years before the actual eruption. We show that active and potentially eruptive areas in a VRZ can be detected up to 2 years before the arrival to the surface of the final eruptive dyke and venting of lava flows by processing satellite images applying a Normalized Difference Vegetation Index (NDVI) algorithm. A positive NDVI anomaly is indicative of excessive photosynthetic plant activity. A posteriori analysis of satellite images reveal that a high- NDVI linear anomaly was apparent in vegetated areas of VRZ's on Etna from 2000 to 2002 and on Nyiragongo in June 2001, several months to years before eruptive fractures formed directly above the NDVI anomaly. We propose that the observed NDVI linear anomalies are the signature of the integrated physico-chemical effects (increased heat and CO2 flux, H2O condensation) caused by the structurally-controlled progressive injection and propagation, in a VRZ and a few months to years before the eruption, of a series of dykes (dyke wedge) that did not reach the surface. We focus of Nyiragongo volcano where historical flank-fissure eruptions from lava lake drainage in 1977 and 2002 show a link with tectonics of the Kivu rift (western branch of the East African Rift System). In 2002, dykes were injected in the southern VRZ bounded by Kivu rift normal faults and propagated over 14 km producing lava flows that caused widespread destruction in the city of Goma. Data from Nyiragongo suggest that as a dyke wedge is formed and repeatedly reactivated, final eruptive dykes can be injected easily and can propagate rapidly further

Hemorrhoids and anal fissures in inflammatory bowel disease.

PubMed

D'Ugo, S; Stasi, E; Gaspari, A L; Sileri, P

2015-12-01

Perianal disease is a common complication of inflammatory bowel disease (IBD). It includes different conditions from more severe and potentially disabling ones, such as abscesses and fistulas, to more benign conditions such as hemorrhoids, skin tags and fissures. Most literature has been focused on anal sepsis and fistulae, as they carry the majority of disease burden and often alter the natural course of the disease. Hemorrhoids and anal fissures in patients with IBD have been overlooked, although they can represent a challenging problem. The management of hemorrhoids and fissures in IBD patients may be difficult and may significantly differ compared to the non-affected population. Historically surgery was firmly obstructed, and hemorrhoidectomy or sphincterotomy in patients with associated diagnosis of IBD was considered harmful, although literature data is scant and based on small series. Various authors reported an incidence of postoperative complications higher in IBD than in the general populations, with potential severe events. Considering that a spontaneous healing is possible, the first line management should be a medical therapy. In patients non-responding to conservative measures it is possible a judicious choice of surgical options on a highly selective basis; this can lead to acceptable results, but the risk of possible complications needs to be considered. In this review it is analyzed the current literature on the incidence, symptoms and treatment options of hemorrhoids and anal fissures in patients with Crohn's disease and ulcerative colitis.

Magma ascent and lava flow emplacement rates during the 2011 Axial Seamount eruption based on CO2 degassing

NASA Astrophysics Data System (ADS)

Jones, M. R.; Soule, S. A.; Gonnermann, H. M.; Le Roux, V.; Clague, D. A.

2018-07-01

Quantitative metrics for eruption rates at mid-ocean ridges (MORs) would improve our understanding of the structure and formation of the uppermost oceanic crust and would provide a means to link volcanic processes with the conditions of the underlying magmatic system. However, these metrics remain elusive because no MOR eruptions have been directly observed. The possibility of disequilibrium degassing in mid-ocean ridge basalts (MORB), due to high eruptive depressurization rates, makes the analysis of volatile concentrations in MORB glass a promising method for evaluating eruption rates. In this study, we estimate magma ascent and lava flow emplacement rates during the 2011 eruption of Axial Seamount based on numerical modeling of diffusion-controlled bubble growth and new measurements of dissolved volatiles, vesicularity, and vesicle size distributions in erupted basalts. This dataset provides a unique view of the variability in magma ascent (∼0.02-1.2 m/s) and lava flow rates (∼0.1-0.7 m/s) during a submarine MOR eruption based on 50 samples collected from a >10 km long fissure system and three individual lava flow lobes. Samples from the 2011 eruption display an unprecedented range in dissolved CO2 concentrations, nearly spanning the full range observed on the global MOR system. The variable vesicularity and dissolved CO2 concentrations in these samples can be explained by differences in the extent of degassing, dictated by flow lengths and velocities during both vertical ascent and horizontal flow along the seafloor. Our results document, for the first time, the variability in magma ascent rates during a submarine eruption (∼0.02-1.2 m/s), which spans the global range previously proposed based on CO2 degassing. The slowest ascent rates are associated with hummocky flows while faster ascent rates produce channelized sheet flows. This study corroborates degassing-based models for eruption rates using comparisons with independent methods and documents the

Submarine fissure eruptions and hydrothermal vents on the southern Juan de Fuca Ridge: preliminary observations from the submersible Alvin

USGS Publications Warehouse

Normark, W.R.

1986-01-01

The submersible Alvin was used to investigate 3 active hydrothermal discharge sites along the S Juan de Fuca Ridge in September 1984. The hydrothermal zones occur within a 10-30m-deep, 30-50m-wide cleft marking the center of the axial valley. This cleft is the eruptive locus for the axial valley. The hydrothermal vents coincide with the main eruptive vents along the cleft. Each hydrothermal zone has multiple discharge sites extending as much as 500m along the cleft. Sulfide deposits occur as clusters (15-100m2 area) of small chimneys (= or <2m high) and as individual and clustered fields of large, branched chimneys (= or <10m high). Recovered sulfide samples are predominantly the tops of chimneys and spires and typically contain more than 80% sphalerite and wurtzite with minor pyrrhotite, pyrite, marcasite, isocubanite, chalcopyrite, anhydrite, anhydrite, and amorphous silica. The associated hydrothermal fluids have the highest chlorinity of any reported to date.-Authors

Tephra architecture, pyroclast texture and magma rheology of mafic, ash-dominated eruptions: the Violent Strombolian phase of the Pleistocene Croscat (NE Spain) eruption.

NASA Astrophysics Data System (ADS)

Cimarelli, C.; Di Traglia, F.; Vona, A.,; Taddeucci, J.

2012-04-01

A broad range of low- to mid-intensity explosive activity is dominated by the emission of ash-sized pyroclasts. Among this activity, Violent Strombolian phases characterize the climax of many mafic explosive eruptions. Such phases last months to years, and produce ash-charged plumes several kilometers in height, posing severe threats to inhabited areas. To tackle the dominant processes leading to ash formation during Violent Strombolian eruptions, we investigated the magma rheology and the field and textural features of products from the 11 ka Croscat basaltic complex scoria cone in the Quaternary Garrotxa Volcanic Field (GVF). Field, grain-size, chemical (XRF, FE-SEM and electron microprobe) and textural analyses of the Croscat pyroclastic succession outlined the following eruption evolution: activity at Croscat began with fissural, Hawaiian-type fountaining that rapidly shifted towards Strombolian style from a central vent. Later, a Violent Strombolian explosion included several stages, with different emitted volumes and deposit features indicative of differences within the same eruptive style: at first, quasi-sustained fire-fountaining with ash jet and plume produced a massive, reverse to normal graded, scoria deposit; later, a long lasting series of ash-explosions produced a laminated scoria deposit. The eruption ended with a lava flow breaching the western-side of the volcano. Scoria clasts from the Croscat succession ubiquitously show micrometer- to centimeter-sized, microlite-rich domains (MRD) intermingled with volumetrically dominant, microlite-poor domains (MPD). MRD magmas resided longer in a relatively cooler, degassed zone lining the conduit walls, while MPD ones travelled faster along the central, hotter streamline, the two interminging along the interface between the two velocity zones. The preservation of two distinct domains in the short time-scale of the eruption was favoured by their rheological contrast related to the different microlite

The eruption of Mount Pagan volcano, Mariana Islands, 15 May 1981

USGS Publications Warehouse

Banks, N.G.; Koyanagi, R.Y.; Sinton, J.M.; Honma, K.T.

1984-01-01

A major explosive eruption occurred 15 May 1981 at Mount Pagan Volcano, the larger of two historic eruptive centers on Pagan Island, Mariana Islands. The eruption was preceded by increased numbers of locally felt earthquakes beginning in late March or early April and by new ground cracks, new sublimates, and increased gas emissions. A swarm of felt earthquakes began at 0745h (local time = UCT+10 hours) 15 May, and at 0915 h, closely following a loud sonic boom, a strong plinian column issued from the volcano. The high-altitude ash cloud (at least 13.5 km) travelled south-southeast, but ash and scoria deposits were thickest (> 2 m) in the NW sector of the island because of the prevailing low-altitude southeasterly winds. The early activity of 15 May probably involved magmatic eruption along a fissure system oriented about N10??E. However, the eruption became hydromagmatic, possibly within minutes, and was largely restricted to three long-lived vents. The northernmost of these built a substantial new scoria-ash cinder cone. Flows and air-fall deposits, consisting almost entirely of juvenile material, exceeded 105 ?? 106 m3 in volume (75 ?? 106 m3 of magma) on land and at least 70-100 ?? 606 m3 at sea. An unknown volume was carried away by stratospheric winds. Lithic blocks and juvenile bombs as large as 1 m in diameter were thrown more than 2 km from the summit, and evidence for base-surge was observed in restricted corridors as low as 200 m elevation on the north and south slopes of the volcano. Neither of these events resulted in serious injuries to the 54 residents of the island, nor did the eruption produce serious chemical hazards in their water supply. Weak eruptions occurred during the ensuing month, and some of these were monitored by ground observations, seismic monitoring, and deformation studies. Precursory seismicity and possibly deformation occurred with some of the observed eruptions. More vigorous eruptions were reported by visiting residents in late

Shifts in the eruptive styles at Stromboli in 2010–2014 revealed by ground-based InSAR data

PubMed Central

Di Traglia, Federico; Battaglia, Maurizio; Nolesini, Teresa; Lagomarsino, Daniela; Casagli, Nicola

2015-01-01

Ground-Based Interferometric Synthetic Aperture Radar (GBInSAR) is an efficient technique for capturing short, subtle episodes of conduit pressurization in open vent volcanoes like Stromboli (Italy), because it can detect very shallow magma storage, which is difficult to identify using other methods. This technique allows the user to choose the optimal radar location for measuring the most significant deformation signal, provides an exceptional geometrical resolution, and allows for continuous monitoring of the deformation. Here, we present and model ground displacements collected at Stromboli by GBInSAR from January 2010 to August 2014. During this period, the volcano experienced several episodes of intense volcanic activity, culminated in the effusive flank eruption of August 2014. Modelling of the deformation allowed us to estimate a source depth of 482 ± 46 m a.s.l. The cumulative volume change was 4.7 ± 2.6 × 105 m3. The strain energy of the source was evaluated 3–5 times higher than the surface energy needed to open the 6–7 August eruptive fissure. The analysis proposed here can help forecast shifts in the eruptive style and especially the onset of flank eruptions at Stromboli and at similar volcanic systems (e.g. Etna, Piton de La Fournaise, Kilauea). PMID:26323251

Preserving rice quality: fine mapping and introgressing a fissure resistance locus

USDA-ARS?s Scientific Manuscript database

Rice (Oryza sativa L.) kernel fissuring is a major concern of both rice producers and millers. Fissures are small cracks in the rice kernels that increase the percentage of breakage among the kernels when they are transported and milled, which decreases the value of processed rice. This study employ...

New constraints on the pyroclastic eruptive history of the Campanian volcanic Plain (Italy)

USGS Publications Warehouse

de Vivo, B.; Rolandi, G.; Gans, P.B.; Calvert, A.; Bohrson, W.A.; Spera, F.J.; Belkin, H.E.

2001-01-01

The ∼ 150 km3 (DRE) trachytic Campanian Ignimbrite, which is situated north-west of Naples, Italy, is one of the largest eruptions in the Mediterranean region in the last 200 ky. Despite centuries of investigation, the age and eruptive history of the Campanian Ignimbrite is still debated, as is the chronology of other significant volcanic events of the Campanian Plain within the last 200–300 ky. New 40Ar/39Ar geochronology defines the age of the Campanian Ignimbrite at 39.28 ± 0.11 ka, about 2 ky older than the previous best estimate. Based on the distribution of the Campanian Ignimbrite and associated uppermost proximal lithic and polyclastic breccias, we suggest that the Campanian Ignimbrite magma was emitted from fissures activated along neotectonic Apennine faults rather than from ring fractures defining a Campi Flegrei caldera. Significantly, new volcanological, geochronological, and geochemical data distinguish previously unrecognized ignimbrite deposits in the Campanian Plain, accurately dated between 157 and 205 ka. These ages, coupled with a xenocrystic sanidine component > 315 ka, extend the volcanic history of this region by over 200 ky. Recent work also identifies a pyroclastic deposit, dated at 18.0 ka, outside of the topographic Campi Flegrei basin, expanding the spatial distribution of post-Campanian Ignimbrite deposits. These new discoveries emphasize the importance of continued investigation of the ages, distribution, volumes, and eruption dynamics of volcanic events associated with the Campanian Plain. Such information is critical for accurate assessment of the volcanic hazards associated with potentially large-volume explosive eruptions in close proximity to the densely populated Neapolitan region.

Structure, stratigraphy, and eruption chronology of the Hanauma Bay Tuff Ring, Oahu, Hawaii

NASA Astrophysics Data System (ADS)

Rottas, K. M.; Houghton, B. F.

2010-12-01

The Hanauma Bay-Koko Head Complex is one of several volcanic landforms along the Koko fissure, in southeastern Oahu, that formed during rejuvenated volcanism. The Hanauma Bay region of the complex is comprised of two nested tuff rings. The internal structure of the inner tuff ring is well exposed due to subsequent breaching and wave erosion and is described in detail here for the first time. The inner tuff ring is currently believed to have formed during a single eruption episode. However, field observations, detailed photography, structural mapping in both the vertical and horizontal planes, extensive measurements of bedding attitudes, and stratigraphic analysis suggest that there were a minimum of five distinct intervals of deposition, which also blanketed the deposits of the outer tuff ring with ejecta. These intervals of sedimentation were separated by significant collapses, generating major unconformities that cross the inner wall of the inner ring. The planes of failure are marked by smaller steep-walled channels and gullies, eroded by rainfall-induced runoff and suggesting the failures were each followed by short time breaks with erosion. Within each pyroclastic sequence there are also smaller slump scars and local unconformities. The inner tuff ring was predominately formed by pyroclastic surges, although the beds of Phase 3 are primarily fall deposits. From ballistic trajectories and bedding features, it is apparent that the eruption locus shifted a minimum of two times during tuff ring growth. Ballistic blocks in the final Phase 5 indicate that the Hanauma Bay eruption was contemporaneous with a separate eruption to the north, most likely that of the Kahauloa tuff ring 880 meters away.

Differential compaction mechanism for earth fissures near Casa Grande, Arizona.

USGS Publications Warehouse

Jachens, R.C.; Holzer, T.L.

1982-01-01

Precise gravity measurements indicate that earth fissures or tension cracks caused by ground-water withdrawal within a 10km2 area SE of Casa Grande are associated with relief on the buried interface between the alluvial aquifer and underlying bedrock. These relations suggest that the fissures are forming in response to localized differential compaction caused by localized variations of aquifer-system thickness. -from Authors

Surface fracturing and graben subsidence during the 2014 Bárdarbunga dike intrusion in Iceland

NASA Astrophysics Data System (ADS)

Rut Hjartardóttir, Ásta; Einarsson, Páll; Tumi Gudmundsson, Magnús; Högnadóttir, Thordís

2015-04-01

A dike propagated laterally away from the Bárdarbunga central volcano in August 2014. The dike propagated about 48 km towards the northeast and north-northeast, mostly beneath the Vatnajökull glacier. However, the farthest 8 km of the dike were located north of the glacier, where the ice-free area allowed surface fractures and graben subsidence to be observed. This dike intrusion was accompanied by eruptions, the most prominent ones occurring within the graben at the distal end of the dike. In this study, photographs taken from airplanes were rectified by using the ArcGIS software. This was done in order to map the fractures and eruptive fissures which were formed or reactivated during this dike intrusion, and to show the temporal evolution of the fracture pattern. Ground deformation across the graben was measured from an airplane with a radar altimeter and kinematic GPS. The propagation of the dike was shown by laterally propagating earthquakes and by ground deformation recorded by GPS geodetic network. Three days after the dike had propagated north of the Vatnajökull glacier, new and reactivated fractures were detected in this area, above the dike. The fractures delineated two grabens in direct continuation of each other. The southern graben extended 5 km northwards from the glacier boundary, and was 700-1000 m wide. Before the eruptions, the northern graben was seen ~6.6-7.5 km north of the glacier, and was only 250-450 m wide. Two days later, on the 29th of August, a four-hour long eruption took place on a 600 m long eruptive fissure 6 km north of the glacier. Then, the narrow northern graben was seen extending about 1-1.6 km farther to the south than before the eruption, with the new eruptive fissure in the middle of it. The eruption resumed again two days later, extending the same eruptive fissure towards the south and north, to a total of ~1900 m length. This eruption is still ongoing (in January 2014). On the 5th of September, three short (~100 to 250 m

Internal sphincterotomy versus topical nitroglycerin ointment for chronic anal fissure.

PubMed

Aslam, Muhammad I; Pervaiz, Arif; Figueiredo, Rodrigo

2014-01-01

Anal fissure is a common benign condition. An anorectal problem is defined as a split in the anal canal mucosa that extends from the dentate line to the anal verge. Chronic anal fissure is defined by a history of symptoms present for more than 2 months' duration and with a triad of external skin tags, namely, a hypertrophied anal papilla, an ulcer with rolled edges, and a base exposing the internal sphincter. Because complications such as incontinence are associated with surgical treatment, chemical sphincterotomy is currently favored. The objective of this study is to compare the difference in outcome between open partial lateral anal sphincterotomy and application of topical 0.2% nitroglycerin ointment for the treatment of chronic anal fissure. This was a quasi-experimental study carried out between January 16, 2007 and January 15, 2008 in the Surgical Department of Jinnah Hospital, Lahore, Pakistan. Sixty consecutive cases with a clinical diagnosis of chronic anal fissure were recruited in the study. All recruited patients met the study inclusion criteria and were randomly assigned to one of the two groups. Group A was managed conservatively using topical 0.2% nitroglycerin ointment, whereas Group B underwent open partial lateral anal sphincterotomy. Both groups were followed up at 1 week, 2 weeks, 4 weeks, and 6 weeks after the treatment. All the patients complained of pain. A total of 43 (71.7%) patients had pain with constipation, whereas 31 (51.7%) patients had bleeding per rectum. Upon clinically examining the anal area, tenderness was elicited in all 60 (100%) patients. Group A included 30 (11 females and 19 males) cases treated with topical 0.2% nitroglycerin ointment and Group B included 30 (11 females and 19 males) cases who underwent open partial lateral anal sphincterotomy. In Group A, only 15 patients with fissures were successfully treated (50%). By contrast, 28 (93%) patients with fissures in Group B were successfully treated, and only two (7

Eruption at Bardarbunga, Iceland

NASA Image and Video Library

2015-01-27

The main caldera of Bardarbunga volcano is tucked beneath Iceland’s largest glacier, Vatnajökull. Beginning in August, 2014, red-hot basaltic lava originating from Bardarbunga has been pouring from fissures just north of Vatnajökull, creating the massive Holuhraun lava field. As of January 6, 2015, the Holuhraun lava field had spread across more than 84 square kilometers (32 square miles), making it larger than the island of Manhattan. Holuhraun is Iceland’s largest basaltic lava flow since the Laki eruption in 1783–84, an event that killed 20 percent of the island’s population. Scientists from the University of Iceland’s Institute of Earth Sciences have estimated the thickness of the lava field based on data from surveillance flights. On average, the eastern part was about 10 meters (33 feet) thick, the center was 12 meters, and the western part was 14 meters. Their preliminary analysis put the volume of lava at 1.1 cubic kilometers, enough for the eruption to be considered a flood basalt. While Holuhraun continues to spew copious amounts of lava and sulfur dioxide, some observations suggest the eruption may be slowing down. As Edinburgh University volcanologist John Stevenson noted on his blog, Icelandic scientists have shown that the sinking (subsidence) of the caldera has declined from 80 centimeters (31 inches) to 25 centimeters per day—a sign that less magma is moving toward the surface. In addition, magnitude 5 or higher earthquakes that used to occur daily are now happening about once a week. Meanwhile, satellite observations of heat flux show a decline from more than 20 gigawatts in early September to fewer than 5 gigawatts by the end of November. As reported by Volcano Discovery, one bold scientist has even suggested that it is reasonable to forecast that the eruption may be over by March, 2015. The Moderate Resolution Imaging Spectrometer (MODIS) aboard NASA’s Aqua satellite flew over Iceland on January 18, 2015 and captured a false

[Application of individually designed trans-fissure approach in brain surgery: analysis of 90 cases].

PubMed

Zhao, Ji-Zong; Wang, Shuo; Zhang, Mao-Zhi; Wang, Lei; Wang, Rong; Tang, Ya-Juan

2009-01-06

To explore the feasibility and value of trans-fissure approaches in brain surgery through individually designed craniotomy. Ninety patients with intracranial space-occupying lesions, 47 males and 58 females, aged (43 +/- 14) (1 - 68), were treated by individualized trans-fissure approach surgeries. Linear scalp incision or "horseshoe shape" scalp incision were designed to perform the operation, with a bone flap 3 - 4 cm in diameter. The shortest approach to reach the lesion was decided under the guidance of neuro-navigation and real-time B-mode ultrasonography. Then the lesions were removed through natural cortical fissures. Another 79 patients with intracranial space-occupying lesions, 53 males and 51 females, aged (42 +/- 11) (15 -73), undergoing classical surgeries in the same period were used as control group. The average operation time, size of bone flap, amount of blood loss, hospitalization time, and hospitalization cost were compared between these 2 groups. The operation time of the individually designed trans-fissure approach group was (3.1 +/- 1.6) hours (1.33 - 10.83 hours), significantly shorter than that of the control group [(4.8 +/- 1.9) hrs, P < 0.05]. The amount of blood loss of the individually designed trans-fissure approach group was (173 +/- 168) ml (20 m - 500 ml), significantly less than that of the control group [(410 +/- 61) ml, P < 0.01]. The size of bone flap of the individually designed trans-fissure approach group was (12 +/- 5) cm2 [(1 - 25) cm2], significantly smaller than that of the control group [(20. +/- 9) cm2, P < 0.01]. Four of the 90 patients of the individually designed trans-fissure approach group received retransfusion, compared to 15 in the control group, during operation. No infection or other significant complications occurred after operation in the individually designed trans-fissure approach group. The hospitalization time of the individually designed trans-fissure approach group was (20 +/- 6) days (9 - 39 days

Volatile budget of the Nornahraun eruption of the Bárðarbunga system, Iceland

NASA Astrophysics Data System (ADS)

Bali, Eniko; Sigmarsson, Olgeir; Jakobsson, Sigurdur; Gunnarsson, Haraldur

2015-04-01

Following two weeks of an intensive earthquake swarm coupled with approximately 60 cm E-W extension across the volcanic zone north of Vatnajökull glacier, a fissure eruption started on 29th of August 2014 in the Bárðarbunga volcanic system. The continuing eruption produced lava fountains and a lava field associated with minor tephra fallout. The lava is an almost aphyric, olivine tholeiite, containing 1 to 3 vol% of plagioclase and minor olivine and clinopyroxene phenocrysts (Gudfinnsson et al., this session). Fast cooled tephra was collected on 31st of August and 4th and 8th of September from the vicinity of the fissure. Phenocryst phases as well as groundmass glass have been handpicked and doubly polished and analysed for H2O and CO2 with FTIR-spectroscopy. The phenocrysts contain glassy silicate melt inclusions with or without a fluid bubble and some phenocrysts also contain free fluid inclusions. The fluid phase and the individual fluid inclusions were analysed by Raman Spectroscopy and the abundance of other volatiles (S, F, Cl) has been determined by electron microprobe from exposed inclusions and groundmass glass. The H2O content of melt inclusions varies between 0.1 and 0.5 wt% whereas the CO2 contents are between 900 ppm and detection limit indicating various entrapment conditions of the melt inclusions after fluid saturation. S contents in melt inclusions are as high as 1600 ppm whereas F and Cl contents in the same inclusions are low (~300 and ~90 ppm, respectively). Groundmass glass contains 0.1 wt% of H2O, ~400 ppm S and no CO2. F and Cl in groundmass glass is similar to those measured in the melt inclusions. Based on the Raman analyses individual fluid inclusions are pure CO2. The highest determined CO2 density was 0.642 g/cm3 (using the method by Kawakami et al., 2003). At a temperature of 1180 °C, which is assumed to be the equilibrium temperature of the basalt based on various geothermometers (Haddadi et al., this session), this CO2 density

Efficacy of nitroglycerine ointment in the treatment of pediatric anal fissure.

PubMed

Joda, Ali E; Al-Mayoof, Ali F

2017-11-01

Anal fissure is the most common anal disease in children. In the past few decades, the understanding of its pathophysiology has led to a progressive reduction in invasive procedures in favor of conservative treatment based on stool softeners and the relaxation of the anal sphincter. This randomized controlled study assessed the safety and efficacy of nitroglycerine (NTG) ointment in the treatment of pediatric anal fissure, which had not yet been proved. An unequal randomized controlled study included 105 pediatric patients with anal fissure who had presented to the private and outpatient clinics of the Central Teaching Hospital of Pediatrics during the period from February 2015 to May 2016. The control group consisted of 70 patients. Both groups were treated with classical conservative therapy of sitz bath, stool softener, and local anesthetic. In the second group, chemical sphincterotomy with 0.2% NTG ointment was used in 35 patients, and was applied at the anal canal twice daily for 8weeks. The primary outcomes of symptomatic improvement and healed fissure, as well as side effects, were analyzed. The average age of patients was 2years (range, 4months to 5years). Patients in the NTG group had 77% symptomatic relief and 60% healed fissure compared to the control group, which had 54% and 32.8% respectively. All were statistically significant. No serious adverse effects were noticed during the treatment period. The use of 0.2% NTG ointment is an effective therapy for anal fissure in children in terms of good healing rate and rapid symptom relief, but it has the drawback of a long treatment period, making patient compliance more difficult, in addition to the problems of tolerance and recurrence. Prospective randomized controlled study (treatment study). Type 2. Copyright © 2017 Elsevier Inc. All rights reserved.

The 0.57 Ma plinian eruption of the Granadilla Member, Tenerife (Canary Islands): an example of complexity in eruption dynamics and evolution

NASA Astrophysics Data System (ADS)

Bryan, S. E.; Cas, R. A. F.; Martí, J.

2000-12-01

Granadilla pumice and ignimbrite are 5.2 and 5 km3, respectively. The dispersal area, deposit characteristics, and exponential thickness and clast size decay relationships with (isopach area)1/2 are consistent with dispersal and fallout from the umbrella region of a moderately high (˜17 to ≥25 km) plinian column. We propose that the eruption involved two vents, probably aligned along a NE-SW fissure within the Las Cañadas caldera.

Analysis of Ballistic Blocks and Eruption History of Montaña Colorada, Lanzarote, Canary Islands

NASA Astrophysics Data System (ADS)

Semple Domagall, A. M.; Kobs-Nawotniak, S. E.

2015-12-01

From September 1730 to April 1736, more than 30 vents formed along a ~18 km long rift on the island of Lanzarote in the Canary Islands. Little actual data of these eruptions exist with the exception of court records and the diary of a priest from Yaiza. Previous research has broken this five and a half year period into 5 major eruptive phases (Carracedo et al., 1992).Montaña Colorada - a 150 m-tall, 600 m wide cinder cone - is the final vent associated with this eruption, and likely formed in <10 days (Carracedo et al., 1992). A'a lava flows (including one >10 km long), large spatter clasts, spatter within the cinder cone, and a minor ash blanket are associated with this vent. These are typical of the 1730-1736 vents on Lanzarote. Unique to Montaña Colorada is the presence of a solidified lava pond within the vent, and an array of large (~1-4 m diameter), dense (2800 kg/m3), basaltic blocks roughly 500-1000 m from the vent. Additionally, peridotite nodules (up to 15 cm diameter) are found both within the lava flows and the tephra: the nodules are seen only here and at the, nearby, first vent associated with the eruptions. Lava flows, possibly from a fissure vent, started the eruption at Montaña Colorada: an effusion rate of 74.9 ± 25.9 m3s-1 is estimated for the 10.6 km-long, peridotite-bearing, flow, giving an emplacement time of ~1-3 days. As the eruption rate decreased, agglutinated spatter collected closer to the vent with loose tephra distally forming the main cinder cone. Towards the end of the eruption it appears the vent was filled with a lava pond, which breached to the north. The large, dense, blocks surrounding Montaña Colorada are here suggested to be the result of a transient explosion of a previous lava pond that occupied the vent. A lack of peridotite nodules or vesicles would be consistent with basalt that had pooled within the vent for some time. Eruption velocities on the order of 70-300 ms-1 are calculated for these blocks.

Numerical simulation of earth fissures caused by overly aquifer exploitation at Guangming Village, China

NASA Astrophysics Data System (ADS)

Ye, S.; Franceschini, A.; Zhang, Y.; Janna, C.; Gong, X.; Yu, J.; Teatini, P.

2017-12-01

Earth fissures accompanying anthropogenic land subsidence due to overly aquifer exploitation create significant geohazards in China. In the framework of an efficient and safe management of groundwater, numerical models represent a unique scientific approach to predict the generation and development of earth fissures. However, the common geomechanical simulators fail to reproduce fissure development because, due to compatibility conditions, they cannot be effectively applied in discontinuous mechanics. We present an innovative modelling approach for the simulation of fissure development. Firstly, a regional 3D groundwater model is calibrated on available piezometric records; secondly, the regional outcome is used to define the boundary conditions of a local 3D groundwater model developed at the fissure scale and implementing a refined discretization of the local hydrogeologic setting; finally, the pressure change are used as forcing factor in a local 3D geomechanical model, which combines Finite Elements and Interface Elements to simulate the deformation of the continuous aquifer system and the generation and sliding/opening of earth fissures The approach has been applied to simulate the earth fissure at Guangming Village in Wuxi, China with land subsidence of more than 1 m caused by the overexploitation of the second confined aquifer. The first earth fissure was observed in 1998. It developed fast from 1998 to 2007. The domain addressed by the local simulations is 2 km wide and 5 km long. The thickness of the aquifer system ranges from 0 m, in the proximity of a mountain ridge southward, to 210 m northward and includes a phreatic aquifer, the first and second confined aquifers, and four aquitards. The simulations spanned the period from 1980, i.e. before the inception of large groundwater withdrawals, to 2015. The modelling results highlight that the earth fissures at Guangming Village have been caused by tension and shear, which developed from the land surface

Haemorrhoids and anal fissures during pregnancy and after childbirth: a prospective cohort study.

PubMed

Poskus, T; Buzinskienė, D; Drasutiene, G; Samalavicius, N E; Barkus, A; Barisauskiene, A; Tutkuviene, J; Sakalauskaite, I; Drasutis, J; Jasulaitis, A; Jakaitiene, A

2014-12-01

To identify the incidence and risk factors of haemorrhoids and fissures during pregnancy and after childbirth. Prospective observational cohort study. University hospital and outpatient clinics in Lithuania. A total of 280 pregnant women followed up until 1 month after delivery. Women were examined four times through pregnancy and after delivery; those that developed peri-anal diseases were compared with those that did not. Incidence, time and risk factors of haemorrhoids and fissures. In all, 123 (43.9%) women developed peri-anal disease: 1.6% in the first trimester, 61% during the third trimester, 34.1% after delivery and 3.3% 1 month after delivery; 114 (40.7%) women were diagnosed with haemorrhoids, seven (2.5%) with haemorrhoids and anal fissure and two (0.71%) with anal fissure. Ninety-nine (80.5%) women had vaginal delivery and 24 (19.5%) women had undergone caesarean section. Multivariate analysis identified personal history of peri-anal diseases (odds ratio [OR] 11.93; 95% confidence interval [95% CI] 2.18-65.30), constipation (OR 18.98; 95% CI 7.13-50.54), straining during delivery for more than 20 minutes (OR 29.75; 95% CI 4.00-221.23) and birthweight of newborn>3800 g (OR 17.99; 95% CI 3.29-98.49) as significant predictors of haemorrhoids and anal fissures during pregnancy and perinatal period. Haemorrhoids and fissures are common during the last trimester of pregnancy and 1 month after delivery, with constipation, personal history of haemorrhoids or fissures, birthweight of newborn>3800 g, straining during delivery for more than 20 minutes being independently associated risk factors. © 2014 Royal College of Obstetricians and Gynaecologists.

Maps showing water-level declines, land subsidence, and earth fissures in south-central Arizona

USGS Publications Warehouse

Laney, R.L.; Raymond, R.H.; Winikka, C.C.

1978-01-01

From 1915 to 1975, more than 109 million acre-feet of ground water was withdrawn from about 4,500 square miles in Pinal and Maricopa Counties in south-central Arizona. The volume of water withdrawn greatly exceeds the volume of natural recharge, and water levels have been declining since 1923. As a result of the water-level declines, the land surface has subsided, the alluvial deposits have been subjected to stress, and earth fissures have developed. Land subsidence and earth fissures have damaged public and private properties. Subsidence and fissures will continue to occur as long as ground water is being mined and water levels continue to decline. As urban development expands, land subsidence and earth fissures will have an increasing socioeconomic impact. Information on maps includes change in water levels, measurements of land subsidence, and location of earth fissures. A section showing land subsidence between Casa Grande and the Picacho Peak Interchange also is included. Scale 1:250,000. (Woodard-USGS)

Adaptive Management of Land Subsidence and Ground Fissuring in the Chino Groundwater Basin, California

NASA Astrophysics Data System (ADS)

Malone, A.; Rolfe, T.; Wildermuth, M.; Kavounas, P.

2014-12-01

The Chino Basin, located in southern California, is a large alluvial groundwater basin with storage in excess of five million acre-feet. The basin has a long history of groundwater development for various uses dating back to the early 1900s. As a result, piezometric heads declined basin-wide during the past century - in some areas by more than 200 feet. Declines of this magnitude typically cause irreversible aquifer-system compaction, which in turn results in subsidence at the ground surface. In portions of Chino Basin, land subsidence has been differential and accompanied by ground fissuring, which damaged existing infrastructure and poses concerns for new and existing development.Chino Basin Watermaster, the agency responsible for groundwater basin management, has recognized that land subsidence and ground fissuring should be minimized to the extent possible. At the same time, Watermaster is implementing aggressive groundwater-supply programs that include controlled overdraft and the possibility of causing head declines in areas prone to subsidence and fissuring. The groundwater-supply programs must also address the subsidence and fissuring phenomena.From 2001 to 2005, Watermaster conducted a technical investigation to characterize the extent, rate, and mechanisms of subsidence and fissuring. The investigation employed InSAR and ground-level surveying of benchmarks to monitor ground-surface deformation, and borehole extensometers and piezometric monitoring to establish the relationships between groundwater production, piezometric levels, and aquifer-system deformation. Based on the results of the investigation, Watermaster developed: (i) subsidence-management criteria for the areas experiencing acute subsidence and fissuring, and (ii) an adaptive management program to minimize the potential for future subsidence and fissuring across the entire Chino Basin. The science-based program includes ongoing monitoring, which now includes sophisticated fissure

The eruption of Mount Pagan volcano, Mariana Islands, 15 May 1981

NASA Astrophysics Data System (ADS)

Banks, Norman G.; Koyanagi, Robert Y.; Sinton, John M.; Honma, Kenneth T.

1984-10-01

A major explosive eruption occurred 15 May 1981 at Mount Pagan Volcano, the larger of two historic eruptive centers on Pagan Island, Mariana Islands. The eruption was preceded by increased numbers of locally felt earthquakes beginning in late March or early April and by new ground cracks, new sublimates, and increased gas emissions. A swarm of felt earthquakes began at 0745h (local time = UCT+10 hours) 15 May, and at 0915 h, closely following a loud sonic boom, a strong plinian column issued from the volcano. The high-altitude ash cloud (at least 13.5 km) travelled south-southeast, but ash and scoria deposits were thickest (> 2 m) in the NW sector of the island because of the prevailing low-altitude southeasterly winds. The early activity of 15 May probably involved magmatic eruption along a fissure system oriented about N10°E. However, the eruption became hydromagmatic, possibly within minutes, and was largely restricted to three long-lived vents. The northernmost of these built a substantial new scoria-ash cinder cone. Flows and air-fall deposits, consisting almost entirely of juvenile material, exceeded 105 × 10 6 m 3 in volume (75 × 10 6 m 3 of magma) on land and at least 70-100 × 60 6 m 3 at sea. An unknown volume was carried away by stratospheric winds. Lithic blocks and juvenile bombs as large as 1 m in diameter were thrown more than 2 km from the summit, and evidence for base-surge was observed in restricted corridors as low as 200 m elevation on the north and south slopes of the volcano. Neither of these events resulted in serious injuries to the 54 residents of the island, nor did the eruption produce serious chemical hazards in their water supply. Weak eruptions occurred during the ensuing month, and some of these were monitored by ground observations, seismic monitoring, and deformation studies. Precursory seismicity and possibly deformation occurred with some of the observed eruptions. More vigorous eruptions were reported by visiting residents in

Dyke-path formation in relation to the eruptions of Eyjafjallajökull 2010 and Bardarbunga-Holuhraun 2014

NASA Astrophysics Data System (ADS)

Gudmundsson, Agust

2015-04-01

Dykes are extension fractures and form when the magmatic overpressure is high enough to rupture (break) the host rock. Their formation is entirely analogous to that of many joints and human-made hydraulic fractures, such as are used to increase permeability in reservoirs. When generating their paths, dykes use existing weaknesses (e.g., cooling joints) in the host rock. The maximum depth of large tension fractures below the surface of a rift zone, however, is mostly less than a few hundred metres. If the fractures extend to greater depths, they must change into closed normal faults which are generally not used as magma paths. There are thus no large tension fractures or wide-open faults at great depths ready to be filled with magma to form a dyke. While magma flow in dykes, as in other fluid-driven fractures, is at any point in various directions dyke segmentation may indicate the overall large-scale flow direction. Thus, dykes composed of large-spaced disconnected segments in lateral sections are primarily formed in vertical magma flow at segmentation depth whereas those composed of large-spaced disconnected segments in vertical sections are primarily formed in lateral magma flow. The far-field displacement and stress fields of segmented dykes are similar to those generated by single, continuous dykes of similar dimensions, particularly when the distances between the nearby tips of the segments become small in comparison with segment lengths. Most dykes become arrested and never supply magma to eruptions. Feeder-dykes normally reach the surface only along parts of their lengths (strike-dimensions). The volumetric flow or effusion rate of magma through a feeder-dyke or volcanic fissure depends on the aperture (opening) of the dyke or fissure in the 3rd power. All these theoretical and observational results are here applied to the dyke emplacements associated with the eruptions of Eyjafjallajökull 2010 and Bardarbunga-Holuhraun 2014. The results make it possible to

Expression profiling during ocular development identifies 2 Nlz genes with a critical role in optic fissure closure.

PubMed

Brown, Jacob D; Dutta, Sunit; Bharti, Kapil; Bonner, Robert F; Munson, Peter J; Dawid, Igor B; Akhtar, Amana L; Onojafe, Ighovie F; Alur, Ramakrishna P; Gross, Jeffrey M; Hejtmancik, J Fielding; Jiao, Xiaodong; Chan, Wai-Yee; Brooks, Brian P

2009-02-03

The gene networks underlying closure of the optic fissure during vertebrate eye development are poorly understood. Here, we profile global gene expression during optic fissure closure using laser capture microdissected (LCM) tissue from the margins of the fissure. From these data, we identify a unique role for the C(2)H(2) zinc finger proteins Nlz1 and Nlz2 in normal fissure closure. Gene knockdown of nlz1 and/or nlz2 in zebrafish leads to a failure of the optic fissure to close, a phenotype which closely resembles that seen in human uveal coloboma. We also identify misregulation of pax2 in the developing eye of morphant fish, suggesting that Nlz1 and Nlz2 act upstream of the Pax2 pathway in directing proper closure of the optic fissure.

Modeling plaque fissuring and dissection during balloon angioplasty intervention.

PubMed

Gasser, T Christian; Holzapfel, Gerhard A

2007-05-01

Balloon angioplasty intervention is traumatic to arterial tissue. Fracture mechanisms such as plaque fissuring and/or dissection occur and constitute major contributions to the lumen enlargement. However, these types of mechanically-based traumatization of arterial tissue are also contributing factors to both acute procedural complications and chronic restenosis of the treatment site. We propose physical and finite element models, which are generally useable to trace fissuring and/or dissection in atherosclerotic plaques during balloon angioplasty interventions. The arterial wall is described as an anisotropic, heterogeneous, highly deformable, nearly incompressible body, whereas tissue failure is captured by a strong discontinuity kinematics and a novel cohesive zone model. The numerical implementation is based on the partition of unity finite element method and the interface element method. The later is used to link together meshes of the different tissue components. The balloon angioplasty-based failure mechanisms are numerically studied in 3D by means of an atherosclerotic-prone human external iliac artery, with a type V lesion. Image-based 3D geometry is generated and tissue-specific material properties are considered. Numerical results show that in a primary phase the plaque fissures at both shoulders of the fibrous cap and stops at the lamina elastica interna. In a secondary phase, local dissections between the intima and the media develop at the fibrous cap location with the smallest thickness. The predicted results indicate that plaque fissuring and dissection cause localized mechanical trauma, but prevent the main portion of the stenosis from high stress, and hence from continuous tissue damage.

Resistivity variations related to the large March 9, 1998 eruption at La Fournaise volcano inferred by continuous MT monitoring

NASA Astrophysics Data System (ADS)

Wawrzyniak, Pierre; Zlotnicki, Jacques; Sailhac, Pascal; Marquis, Guy

2017-11-01

The 2645 m-high La Fournaise volcano, located in the Southwest of Réunion Island (Indian Ocean), is a shield basaltic volcano where effusive eruptions generally occur along long fissures starting from the summit, alongside major fractures that characterize the eruptions' dynamism and effusivity. Between 1992 and 1998, the volcano underwent a quiet period during which few earthquakes were recorded. Minor seismic activity returned after 1997 and picked up in March 1998 during the 35 h preceding the March 9 eruption. From 1996, two autonomous stations (CSV and BAV) were installed on the volcano. CSV was located inside the Enclos Fouqué caldera while BAV was positioned 8.2 km NW of the volcano summit. Horizontal components of the electric and magnetic fields were sampled every 20 s. Continuous time-series were available from 1996 to 1999 at CSV, and from 1997 to March 1998 at BAV. Data have been processed using both single-station and remote-reference processing. Both results show apparent resistivity variations synchronous to the eruption. Time-lapse impedance estimates are computed on overlapping time windows of about two days at both stations. The only major decrease of the observed impedance coincides with the March 1998 eruption. At CSV, the resistivity started to drop about five days before the eruption, reached several local minima until April, and then slowly increased as the volcanic crisis reduced in activity. After the end of the crisis in September 1998, the apparent resistivity recovered its pre-crisis value. The time-lapse results also show variability in directionality: sharp and elongated phase tensor ellipse residuals appear during the eruption with a N105° orientation, suggesting the emergence of an almost NS-striking dyke. A 1D background model built from MT soundings performed during the quiet period (1996 to February 1998) on which a 3D NS-striking dyke was added shows a good agreement with phase tensor residuals and spatial distribution of the

Glaser Fissure, Huguier Canal, and Civinini Canal: A Confused Eponymical Imbroglio.

PubMed

Mudry, Albert

2015-07-01

Huguier canal or Civinini canal is a canaliculus in the Glaser fissure allowing the exit of the chorda tympani from the tympanic cavity. The aim of this study is to try to put some order in the origins and relations of these different eponyms, and to evaluate their pertinence in the actual anatomical terminology. This study demonstrates that Huguier and Civinini are not the first to describe this canal in the 1830s. Furthermore, it confirms that Glaser does not describe the related fissure in 1680. In conclusion, Glaser, Civinini, and Huguier no longer have a place in the actual anatomical nomenclature of the fine details of the temporal bone. To avoid confusion and errors, they must be replaced by anterior canaliculus for the chorda tympani and petrotympanic fissure.

Monitoring the Bardarbunga eruption using GOME-2/Metop-A & -B

NASA Astrophysics Data System (ADS)

Hedelt, Pascal; Valks, Pieter; Loyola, Diego

2015-04-01

We will present here the results of the Bardarbunga eruption monitored by the GOME-2 instrument aboard MetOp-A & -B. After increased seismic activity in August, the Icelandic volcano Bardarbunga (Bárðarbunga) erupted on 31 August 2014. Since 1 September the GOME-2 instruments aboard the MetOp-A and -B satellites detect a continuous emission of sulphur-dioxide (SO2) emitted from the Holuhraun fissure at the flanks of the Bardarbunga volcano. At the beginning the emitted SO2 was mainly transported to the north-eastern direction over Scandinavia and Russia. However, on September 22 an SO2 cloud was even moving over Europe and could be detected at the Hohenpeissenberg and Schneefernerhaus observatories. SO2 emissions are a good indicator for volcanic activity, since besides weak anthropogenic emissions there are no other known sources for atmospheric SO2, which can cause respiratory problems in the local population and the aircraft passengers. Furthermore in form of acid rain it increases the oxidation of aircraft components. It was found that for some volcanic eruptions SO2 can be a good proxy for the much harder to detect volcanic ash. Volcanic ash can be hazardous not only for the local population but also for aviation since it can cause total engine failure if it melts and then congeals in the engine. Furthermore ash is highly abrasive to engine turbine vanes and propellers. Under the leadership of IMF, DLR-EOC provides operational trace gas measurements, including total SO2 columns, in near-real-time (i.e., within 2 hours of recording) in the framework of EUMETSAT's Satellite Application Facility on Ozone and Atmospheric Chemistry Monitoring (O3M-SAF).

Lava flow hazards-An impending threat at Miyakejima volcano, Japan

NASA Astrophysics Data System (ADS)

Cappello, Annalisa; Geshi, Nobuo; Neri, Marco; Del Negro, Ciro

2015-12-01

The majority of the historic eruptions recorded at Miyakejima volcano were fissure eruptions that occurred on the flanks of the volcano. During the last 1100 years, 17 fissure eruptions have been reported with a mean interval of about 76-78 years. In the last century, the mean interval between fissure eruptions decreased to 21-22 years, increasing significantly the threat of lava flow inundations to people and property. Here we quantify the lava flow hazards posed by effusive eruptions in Miyakejima by combining field data, numerical simulations and probability analysis. Our analysis is the first to assess both the spatiotemporal probability of vent opening, which highlights the areas most likely to host a new eruption, and the lava flow hazard, which shows the probabilities of lava-flow inundation in the next 50 years. Future eruptive vents are expected in the vicinity of the Hatchodaira caldera, radiating from the summit of the volcano toward the costs. Areas more likely to be threatened by lava flows are Ako and Kamitsuki villages, as well as Miike port and Miyakejima airport. Thus, our results can be useful for risk evaluation, investment decisions, and emergency response preparation.

Does the duration of symptoms of anal fissure impact its response to conservative treatment? A prospective cohort study.

PubMed

Emile, Sameh Hany; Elgendy, Hesham; Elfeki, Hossam; Magdy, Alaa; Abdelmawla, Ahmed Aly; Abdelnaby, Mahmoud; Khafagy, Wael

2017-08-01

Conservative treatment is the first line of treatment for anal fissure. The current study aimed to evaluate the impact of symptom duration on the response of anal fissure to conservative treatment. This prospective study was conducted on sixty patients with acute or chronic anal fissure who were treated conservatively with bulking agents, Sitz baths, and topical glyceryl trinitrate (GTN) 0.2%. Pain and constipation were assessed prior to treatment and at 6 weeks after therapy using visual analogue scale (VAS) and Wexner constipation score. Adverse effects as headache and postural hypotension were also queried. The mean pre-treatment VAS for acute fissure was significantly higher than chronic fissure (8.8 ± 0.96 Vs 5.8 ± 1.12), also the post-treatment VAS for acute fissure was significantly lower at 6 weeks of treatment (0.47 ± 0.8 Vs 2.5 ± 1.3). The baseline Wexner constipation score was comparable in both groups; however, at six weeks of treatment it declined more significantly in patients with acute fissure. Patients with acute fissure achieved significantly better healing than chronic fissure (80% Vs 40%). Healing rates decreased from 100% in patients with symptoms < one month to 33.3% in patients with symptoms >6 months. Conservative treatment including topical GTN 0.2% significantly hastened healing and relieved pain and other symptoms of acute more than chronic anal fissure. Healing rates of anal fissure in response to conservative treatment showed remarkable decrease in proportion to the duration of complaint. Copyright © 2017 IJS Publishing Group Ltd. Published by Elsevier Ltd. All rights reserved.

The 1928 eruption of Mount Etna (Italy): Reconstructing lava flow evolution and the destruction and recovery of the town of Mascali

NASA Astrophysics Data System (ADS)

Branca, Stefano; De Beni, Emanuela; Chester, David; Duncan, Angus; Lotteri, Alessandra

2017-04-01

Mount Etna in Sicily (Italy) shows > 2500 years of interactions between volcanic eruptions and human activity, and these are well documented in historical sources. During the last 400 years, flank eruptions have had major impacts on the urban fabric of the Etna region, especially in 1651-54, 1669, 1923 and 1928, and it is the last of these which is the focus of this paper. A detailed field and historical reconstruction of the 1928 eruption is presented which allows three themes to be discussed: the evolution of the flow field, lava volume and average magma discharge rate trend; the eruption's human impact, particularly the destruction of the town of Mascali; and the recovery of the region with re-construction of Mascali in a new location. Detailed mapping of lava flows allowed the following dimensions to be calculated: total area, 4.38 × 106 m2; maximum length, 9.4 km; volume, 52.91 ± 5.21 × 106 m3 and an average effusion rate of 38.5 m3 s-1. Time-averaged discharged rates are calculated allowing the reconstruction of their temporal variations during the course of the eruption evidencing a high maximum effusion rate of 374 m3 s- 1. These trends, in particular with regard to the Lower Fissure main phase of the eruption, are in accordance with the 'idealized discharge model' of Wadge (1981), proposed for basaltic eruptions driven by de-pressurization of magma sources, mainly through reservoir relaxation (i.e. elastic contraction of a magma body). The eruption took place when Italy was governed by Mussolini and the fascist party. The State response both, during and in the immediate aftermath of the eruption and in the years that followed during which Mascali was reconstructed, was impressive. This masked a less benign legacy, however, that can be traced for several subsequent decades of using responses to natural catastrophes to manufacture State prestige by reacting to, rather than planning for, disasters.

Eruption processes and deposit characteristics at the monogenetic Mt. Gambier Volcanic Complex, SE Australia: implications for alternating magmatic and phreatomagmatic activity

NASA Astrophysics Data System (ADS)

van Otterloo, Jozua; Cas, Raymond A. F.; Sheard, Malcolm J.

2013-08-01

The ˜5 ka Mt. Gambier Volcanic Complex in the Newer Volcanics Province, Australia is an extremely complex monogenetic, volcanic system that preserves at least 14 eruption points aligned along a fissure system. The complex stratigraphy can be subdivided into six main facies that record alternations between magmatic and phreatomagmatic eruption styles in a random manner. The facies are (1) coherent to vesicular fragmental alkali basalt (effusive/Hawaiian spatter and lava flows); (2) massive scoriaceous fine lapilli with coarse ash (Strombolian fallout); (3) bedded scoriaceous fine lapilli tuff (violent Strombolian fallout); (4) thin-medium bedded, undulating very fine lapilli in coarse ash (dry phreatomagmatic surge-modified fallout); (5) palagonite-altered, cross-bedded, medium lapilli to fine ash (wet phreatomagmatic base surges); and (6) massive, palagonite-altered, very poorly sorted tuff breccia and lapilli tuff (phreato-Vulcanian pyroclastic flows). Since most deposits are lithified, to quantify the grain size distributions (GSDs), image analysis was performed. The facies are distinct based on their GSDs and the fine ash to coarse+fine ash ratios. These provide insights into the fragmentation intensities and water-magma interaction efficiencies for each facies. The eruption chronology indicates a random spatial and temporal sequence of occurrence of eruption styles, except for a "magmatic horizon" of effusive activity occurring at both ends of the volcanic complex simultaneously. The eruption foci are located along NW-SE trending lineaments, indicating that the complex was fed by multiple dykes following the subsurface structures related to the Tartwaup Fault System. Possible factors causing vent migration along these dykes and changes in eruption styles include differences in magma ascent rates, viscosity, crystallinity, degassing and magma discharge rate, as well as hydrological parameters.

Retention of fissure sealants in young permanent molars affected by dental fluorosis: a 12-month clinical study.

PubMed

Hasanuddin, S; Reddy, E R; Manjula, M; Srilaxmi, N; Rani, S T; Rajesh, A

2014-10-01

To evaluate and compare retention and caries occurance following placement of Clinpro and FUJI VII fissure sealants, by two different techniques simultaneously in unsealed, contralateral young permanent molars of 7- to 10-year-old children affected by mild to moderate dental fluorosis at various recall intervals of 1 week, 1, 3, 6 and 12 months. 80 schoolchildren with mild to moderate dental fluorosis were assigned to Group A and Group B with 40 children in each group. In Group A Clinpro fissure sealant and in Group B Fuji VII fissure sealant was used. In both the groups fissure sealants were applied by conventional fissure sealant technique (CST) on one side and enameloplasty sealant technique (EST) on the other side of the same arch. The applied fissure sealants were evaluated clinically for retention and caries incidence. Clinpro fissure sealant showed a retention rate of 95% when compared with Fuji VII (57.5%) at the end of 12 months, which was statistically significant. Regarding techniques, EST showed better results than CST in both the groups. Comparison of groups with respect to retention and techniques at different time periods was performed using Mann-Whitney U test (p < 0.05). Comparison of different time periods with respect to retention and technique in all the groups was performed using Wilcoxon matched pairs test by ranks (p < 0.05). Clinpro fissure sealant showed better retention at all treatment intervals, when compared with Fuji VII. Further follow-up is required to study the efficacy of the fissure sealant placement techniques.

Atmospheric sulfur loading by the ongoing Nornahraun eruption, North Iceland

NASA Astrophysics Data System (ADS)

Thordarson, Thorvaldur; Hartley, Margaret

2015-04-01

The ongoing Nornahraun fissure eruption has maintained a 1-4 km-high, gas-charged and sulfur-rich eruption plume since the onset of eruption on 31 August 2014 and had discharged ~1 km3 of lava at the end of 2014. During this time (i.e. September through December 2014), the SO2 emissions have produced significant volcanic pollution across Iceland with several short-lived events where the SO2 concentrations have exceeded toxic levels [1]. Although measurements of SO2 concentrations and fluxes is relatively straightforward at specific sites or localities within Iceland, it has been challenging to obtain good ground- or satellite-based time series measurements of the SO2 flux released by the magma upon venting. These difficulties arise because: (i) the eruption site is remote and nested in the centre of the Icelandic highland, thus these measurements are hampered by access and by weather conditions, (ii) the plume is confined to the lower troposphere where the conversion rate of SO2 to H2SO4 aerosols is very rapid, or hours (?) to days [2] and (iii) the plume is commonly obscured by clouds due of its low rise heights. The empirical sulphur emission method of Thordarson et al (2003) is an alternative way to obtain estimates on the total as well as temporal atmospheric SO2-loading by the Nornahraun eruption. We use the TiO2/FeO value of 0.156, obtained via microprobe analyses of groundmass glass in tephra grains, to calculate initial (1420 ppm) and degassed (435 ppm) S values for the Nornahraun magma. These values compare well with measured groundmass values (425 ppm = degassed S content) and melt inclusion values (~1400 ppm = initial S content of the magma). The difference in the above listed values represents the amount of S released into the atmosphere at the vents and indicates a 5.3 kg SO2-loading by each cubic meter of erupted magma. This implies a total atmospheric SO2-mass-loading of 5 million tons (= 5 terragrams) by the Nornahraun event during the first 4

Treatment for anal fissure: Is there a safe option?

PubMed

Brady, Justin T; Althans, Alison R; Neupane, Ruel; Dosokey, Eslam M G; Jabir, Murad A; Reynolds, Harry L; Steele, Scott R; Stein, Sharon L

2017-10-01

Surgeons often approach anal fissure with chemical denervation (Botulinum toxin, BT) instead of initial lateral internal sphincterotomy (LIS) due to concerns for long-term incontinence. We evaluated the characteristics and outcomes of patients who received BT or LIS. We performed a retrospective chart review of patients undergoing LIS and BT for anal fissure between 2009 and 2015. In 2015, a telephone survey was performed to evaluate durability, long-term incontinence and patient satisfaction. Ninety-four patients met criteria: 73 LIS and 21 BT. Age (BT 49 vs. LIS 52) was similar between groups (p = 1.0). Cleveland Clinic Fecal Incontinence (CCFI) score pre-intervention was higher in BT than LIS patients (2.1 vs. 0.4, p = 0.007) with fewer BT patients with perfect continence (50% vs. 88%). Telephone survey response was 61%. Fissure recurrence was significantly higher for BT than LIS patients (36% vs. 9%, p = 0.03). Patients undergoing LIS were less likely to recur. Both LIS and BT patients had some durable changes in continence raising the question of whether there is a safe technique. Copyright © 2017 Elsevier Inc. All rights reserved.

An experimental study on fracture mechanical behavior of rock-like materials containing two unparallel fissures under uniaxial compression

NASA Astrophysics Data System (ADS)

Huang, Yan-Hua; Yang, Sheng-Qi; Tian, Wen-Ling; Zeng, Wei; Yu, Li-Yuan

2016-06-01

Strength and deformability characteristics of rock with pre-existing fissures are governed by cracking behavior. To further research the effects of pre-existing fissures on the mechanical properties and crack coalescence process, a series of uniaxial compression tests were carried out for rock-like material with two unparallel fissures. In the present study, cement, quartz sand, and water were used to fabricate a kind of brittle rock-like material cylindrical model specimen. The mechanical properties of rock-like material specimen used in this research were all in good agreement with the brittle rock materials. Two unparallel fissures (a horizontal fissure and an inclined fissure) were created by inserting steel during molding the model specimen. Then all the pre-fissured rock-like specimens were tested under uniaxial compression by a rock mechanics servo-controlled testing system. The peak strength and Young's modulus of pre-fissured specimen all first decreased and then increased when the fissure angle increased from 0° to 75°. In order to investigate the crack initiation, propagation and coalescence process, photographic monitoring was adopted to capture images during the entire deformation process. Moreover, acoustic emission (AE) monitoring technique was also used to obtain the AE evolution characteristic of pre-fissured specimen. The relationship between axial stress, AE events, and the crack coalescence process was set up: when a new crack was initiated or a crack coalescence occurred, the corresponding axial stress dropped in the axial stress-time curve and a big AE event could be observed simultaneously. Finally, the mechanism of crack propagation under microscopic observation was discussed. These experimental results are expected to increase the understanding of the strength failure behavior and the cracking mechanism of rock containing unparallel fissures.

Traumatic superior orbital fissure syndrome: assessment of cranial nerve recovery in 33 cases.

PubMed

Chen, Chien-Tzung; Wang, Theresa Y; Tsay, Pei-Kwei; Huang, Faye; Lai, Jui-Pin; Chen, Yu-Ray

2010-07-01

Superior orbital fissure syndrome is a rare complication that occurs in association with craniofacial trauma. The characteristics of superior orbital fissure syndrome are attributable to a constellation of cranial nerve III, IV, and VI palsies. This is the largest series describing traumatic superior orbital fissure syndrome that assesses the recovery of individual cranial nerve function after treatment. In a review from 1988 to 2002, 33 patients with superior orbital fissure syndrome were identified from 11,284 patients (0.3 percent) with skull and facial fractures. Severity of cranial nerve injury and functional recovery were evaluated by extraocular muscle movement. Patients were evaluated on average 6 days after initial injury, and average follow-up was 11.8 months. There were 23 male patients. The average age was 31 years. The major mechanism of injury was motorcycle accident (67 percent). Twenty-two received conservative treatment, five were treated with steroids, and six patients underwent surgical decompression of the superior orbital fissure. After initial injury, cranial nerve VI suffered the most damage, whereas cranial nerve IV sustained the least. In the first 3 months, recovery was greatest in cranial nerve VI. At 9 months, function was lowest in cranial nerve VI and highest in cranial nerve IV. Eight patients (24 percent) had complete recovery of all cranial nerves. Functional recovery of all cranial nerves reached a plateau at 6 months after trauma. Cranial nerve IV suffered the least injury, whereas cranial nerve VI experienced the most neurologic deficits. Cranial nerve palsies improved to their final recovery endpoints by 6 months. Surgical decompression is considered when there is evidence of bony compression of the superior orbital fissure.

Calcified gallstone fissures: the reversed Mercedes Benz sign.

PubMed

Strijk, S P

1987-01-01

This article describes the occurrence of an unusual radiating pattern of calcification in the center of large radiolucent gallstones. The radiographic findings are attributed to calcium deposition within the fissures of biliary calculi.

Thermomechanical behavior of mica layers with lenticular fissures

NASA Astrophysics Data System (ADS)

Yang, Michael Xinyi

The thermomechanical behavior of natural phlogopite mica specimens from seven different origins is characterized. An initial heat treatment, to a temperature between 300°C and 400°C, is found to form fissures that stabilize in the material. Following the initial heat treatment, all the phlogopite specimens, regardless of their origin and polytype, exhibit the extraordinarily large thermal expansion (intumescence), more than 200% at 600°C, in the direction perpendicular to the basal planes. This phenomenon is strictly reproducible when tested under a range of thermal conditions including thermal shock, multiple thermal fatigue cycles, varying heating or cooling rates and isothermal heating over an extensive period of time at different temperatures up to 585°C. The hysteresis, associated with the thermal cycle, is increased when the specimen is heated or cooled at a faster rate. The maximum coefficient of linear thermal expansion, approximately 10 -2°C-1, is observed over the temperature range 100--120°C. This is due to the non-structural water, entrapped within the layer structure, which undergoes a phase transition and causes the mica layers to expand abruptly. A model of lenticular fissures is developed based on thin-plate mechanics and thermodynamics assumptions. The state of a lenticular fissure with water vapor molecules is determined to correlate the experimental parameters with the material properties. The average density of water vapor molecules within a lenticular fissure is calculated to be ˜1025 m 3 for the temperature interval between 100°C and 275°C. The concentration of non-structure water, based on the model calculation, is less than 0.1% by weight. Acoustic emission (AE) signals have been reported by Pranevicius et al. (1995) to correspond to the microstructure changes as the internal lenticular fissures develop in phlogopite. This technique has also been proven feasible to characterize the thermomechanical behavior of other layer structures

Grain size distribution and characteristics of the tephra from the Vatnaöldur AD 871±2 eruption, Iceland.

NASA Astrophysics Data System (ADS)

Jónsdóttir, Tinna; Larsen, Guðrún; Guðmundsson, Magnús

2014-05-01

Basaltic explosive eruptions in Iceland are frequent and often occur from vents in regions of surface lakes, large groundwater reservoirs or within glaciers. The recent Eyjafjallajökull eruption in 2010 and Grímsvötn eruption 2011 highlighted the vulnerability of passenger jet aircraft to ash in the atmosphere. Iceland's volcanoes are the most potent producers of tephra in Europe, and the frequent occurrence of basaltic explosive eruptions is a major factor in causing this. As a step in increasing the knowledge on the tephra erupted in basaltic explosive eruptions, we study the grain size distribution of a large (~5 km3) explosive basaltic eruption that occurred in AD 871±2. The source is the 25 km long Vatnaöldur crater row in south-central Iceland. The crater row lies within the Bárðarbunga-Veiðivötn volcanic system, one of the most productive volcanic systems in Iceland in recent times. Samples for grain size analysis were collected at six different locations along the broad northwest-trending dispersal axis. Sampling sites ranged in 1.5 km to 120 km distance from the largest vent Skyggnir, near the southern end of the crater row. The Vatnaöldur eruption has been classified as phreatomagmatic, erupting through fractured bedrock composed of recent lavas, hyaloclastites and pillow lava in an area characterized by a high groundwater level and surface lakes. Explosive activity dominanted the ~ 25 km long discontinuous fissure, as tuff cones were formed and conduits reached under groundwater table. During the eruption the tephra layer was dispersed in all directions. The area within the 0.5 cm isopach is 50,000 km2 and this tephra has also been identified in Greenland ice cores. The grain size analysis indicates that one dominant characteristic of the tephra is the scarcity of pyroclasts over 1 mm in diameter. In the ash sampled more than 4 km from source larger grain sizes are absent. The dispersion in the more distal parts, at distances of 60 - 120 km is

A study on using texture analysis methods for identifying lobar fissure regions in isotropic CT images.

PubMed

Wei, Q; Hu, Y

2009-01-01

The major hurdle for segmenting lung lobes in computed tomographic (CT) images is to identify fissure regions, which encase lobar fissures. Accurate identification of these regions is difficult due to the variable shape and appearance of the fissures, along with the low contrast and high noise associated with CT images. This paper studies the effectiveness of two texture analysis methods - the gray level co-occurrence matrix (GLCM) and the gray level run length matrix (GLRLM) - in identifying fissure regions from isotropic CT image stacks. To classify GLCM and GLRLM texture features, we applied a feed-forward back-propagation neural network and achieved the best classification accuracy utilizing 16 quantized levels for computing the GLCM and GLRLM texture features and 64 neurons in the input/hidden layers of the neural network. Tested on isotropic CT image stacks of 24 patients with the pathologic lungs, we obtained accuracies of 86% and 87% for identifying fissure regions using the GLCM and GLRLM methods, respectively. These accuracies compare favorably with surgeons/radiologists' accuracy of 80% for identifying fissure regions in clinical settings. This shows promising potential for segmenting lung lobes using the GLCM and GLRLM methods.

The effect of CT technical factors on quantification of lung fissure integrity

NASA Astrophysics Data System (ADS)

Chong, D.; Brown, M. S.; Ochs, R.; Abtin, F.; Brown, M.; Ordookhani, A.; Shaw, G.; Kim, H. J.; Gjertson, D.; Goldin, J. G.

2009-02-01

A new emphysema treatment uses endobronchial valves to perform lobar volume reduction. The degree of fissure completeness may predict treatment efficacy. This study investigated the behavior of a semiautomated algorithm for quantifying lung fissure integrity in CT with respect to reconstruction kernel and dose. Raw CT data was obtained for six asymptomatic patients from a high-risk population for lung cancer. The patients were scanned on either a Siemens Sensation 16 or 64, using a low-dose protocol of 120 kVp, 25 mAs. Images were reconstructed using kernels ranging from smooth to sharp (B10f, B30f, B50f, B70f). Research software was used to simulate an even lower-dose acquisition of 15 mAs, and images were generated at the same kernels resulting in 8 series per patient. The left major fissure was manually contoured axially at regular intervals, yielding 37 contours across all patients. These contours were read into an image analysis and pattern classification system which computed a Fissure Integrity Score (FIS) for each kernel and dose. FIS values were analyzed using a mixed-effects model with kernel and dose as fixed effects and patient as random effect to test for difference due to kernel and dose. Analysis revealed no difference in FIS between the smooth kernels (B10f, B30f) nor between sharp kernels (B50f, B70f), but there was a significant difference between the sharp and smooth groups (p = 0.020). There was no significant difference in FIS between the two low-dose reconstructions (p = 0.882). Using a cutoff of 90%, the number of incomplete fissures increased from 5 to 10 when the imaging protocol changed from B50f to B30f. Reconstruction kernel has a significant effect on quantification of fissure integrity in CT. This has potential implications when selecting patients for endobronchial valve therapy.

The 2012-2014 eruptive cycle of Copahue Volcano, Southern Andes. Magmatic-Hydrothermal system interaction and manifestations.

NASA Astrophysics Data System (ADS)

Morales, Sergio; Alarcón, Alex; Basualto, Daniel; Bengoa, Cintia; Bertín, Daniel; Cardona, Carlos; Córdova, Maria; Franco, Luis; Gil, Fernando; Hernandez, Erasmo; Lara, Luis; Lazo, Jonathan; Mardones, Cristian; Medina, Roxana; Peña, Paola; Quijada, Jonathan; San Martín, Juan; Valderrama, Oscar

2015-04-01

Copahue Volcano (COPV), in Southern Andes of Chile, is an andesitic-basaltic stratovolcano, which is located on the western margin of Caviahue Caldera. The COPV have a NE-trending fissure with 9 aligned vents, being El Agrio the main currently active vent, with ca. 400 m in diameter. The COPV is placed into an extensive hydrothermal system which has modulated its recent 2012-2014 eruptive activity, with small phreatic to phreatomagmatic eruptions and isolated weak strombolian episodes and formation of crater lakes inside the main crater. Since 2012, the Southern Andes Volcano Observatory (OVDAS) carried out the real-time monitoring with seismic broadband stations, GPS, infrasound sensors and webcams. In this work, we report pre, sin, and post-eruptive seismic activity of the last two main eruptions (Dec, 2012 and Oct, 2014) both with different seismic precursors and superficial activity, showing the second one a particularly appearance of seismic quiescence episodes preceding explosive activity, as an indicator of interaction between magmatic-hydrothermal systems. The first episode, in late 2012, was characterized by a low frequency (0.3-0.4 Hz and 1.0-1.5 Hz) continuous tremor which increased gradually from background noise level amplitude to values of reduced displacement (DR), close to 50 cm2 at the peak of the eruption, reaching an eruptive column of ~1.5 km height. After few months of recording low energy seismicity, a sequence of low frequency, repetitive and low energy seismic events arose, with a frequency of occurrence up to 300 events/hour. Also, the VLP earthquakes were added to the record probably associated with magma intrusion into a deep magmatic chamber during all stages of eruptive process, joined to the record of VT seismicity during the same period, which is located throughout the Caviahue Caldera area. Both kind of seismic patterns were again recorded in October 2014, being the precursor of the new eruptive cycle at this time as well as the

Effect of Local Crystallographic Texture on the Fissure Formation During Charpy Impact Testing of Low-Carbon Steel

NASA Astrophysics Data System (ADS)

Ghosh, Abhijit; Patra, Sudipta; Chatterjee, Arya; Chakrabarti, Debalay

2016-06-01

The severity of the formation of fissures (also known as splitting or delamination) on the fracture surface of Charpy impact-tested samples of a low-carbon steel has been found to increase with the decrease in finish rolling temperature [1093 K to 923 K (820 °C to 650 °C)]. Combined scanning electron microscopy and electron back-scattered diffraction study revealed that crystallographic texture was the prime factor responsible for the fissure formation. Through-thickness texture band composed of cube [Normal Direction (ND)║<001>] and gamma [ND║<111>] orientations developed during the inter-critical rolling treatment. Strain incompatibility between these two texture bands causes fissure cracking on the main fracture plane. A new approach based on the angle between {001} planes of neighboring crystals has been employed in order to estimate the `effective grain size,' which is used to determine the cleavage fracture stress on different planes of a sample. The severity of fissure formation was found to be directly related to the difference in cleavage fracture stress between the `main fracture plane' and `fissure plane.' Clustering of ferrite grains having cube texture promoted the fissure crack propagation along the transverse `fissure plane,' by increasing the `effective grain size' and decreasing the cleavage fracture stress on that plane.

Floating basaltic lava balloons - constrains on the eruptive process based on morphologic parameters

NASA Astrophysics Data System (ADS)

Pacheco, J. M.; Zanon, V.; Kueppers, U.

2011-12-01

The 1998-2001 submarine Serreta eruption brought to science a new challenge. This eruption took place offshore of Terceira Island (Azores), on the so-called Serreta Submarine Ridge, corresponding to a basaltic fissure zone with alkaline volcanism, within a tectonic setting controlled by an hyper-slow spreading rift (the Terceira Rift). The inferred eruptive centers are alignment along a NE-SW direction over an area with depths ranging from 300 to more than 1000 meters. The most remarkable products of this eruption, were large basaltic balloons observed floating at the sea surface. Those balloons, designated as Lava Balloons, are spherical to ellipsoidal structures, ranging from 0.4 up to about 3 m in length, consisting of a thin lava shell enveloping a closed hollow interior, normally formed by a single large vesicle, or a few large convoluted vesicles, that grants an overall density below water density. The cross section of the lava shell usually ranges between 3 and 8 cm and has a distinct layered structure, with different layers defined by different vesicularity, bubble number density and crystal content. The outermost layer is characterized by very small vesicles and high bubble number density whereas the innermost layer has larger vesicles, lower bubble number density and higher crystal content. These observations indicate that the rapidly quenched outer layer preserved the original small vesicles present on the magma at the time of the balloon's formation while the inner layer continued to evolve, producing higher crystal content and allowing time for the expansion of vesicles inward and their efficient coalescence. The outer surface of the balloons exhibits patches of very smooth glassy surface and areas with striation and grooves resulting from small scale fluidal deformation. These surface textures are interpreted as the result of the extrusion process and were produced in a similar manner to the striation found on subaerial toothpaste lavas. Such

Earth-Fissure Movements Associated with Fluctuations in Ground-Water Levels near the Picacho Mountains, South-Central Arizona, 1980-84

USGS Publications Warehouse

Carpenter, M.C.

1993-01-01

The Picacho earth fissure transects subsiding alluvial sediments near the east periphery of the Picacho basin in south-central Arizona. The basin has undergone land subsidence of as much as 3.8 meters since the 1930's owing to compaction of the aquifer system in response to ground-water-Ievel declines that have exceeded 100 meters. The fissure, which extends generally north-south for 15 kilometers, exhibits horizontal tensile failure and as much as 0.6 meter of normal dip-slip movement at the land surface. The west side of the fissure is down thrown. The fissure was observed as early as 1927 and is the longest earth fissure in Arizona. Vertical and horizontal displacements were monitored along a line normal to the fissure. The survey line extends from a bedrock outcrop in the Picacho Mountains on the east, past an observation well near the fissure, to a point 1,422 meters to the west. From May 1980 to May 1984, the downthrown west side of the fissure subsided 167+-1.8 millimeters and moved 18+-1.5 millimeters westward into the basin. Concurrently, the relatively upthrown east side subsided 148+-1.8 millimeters and moved 14+-1.5 millimeters westward. Dislocation modeling of deformation along the survey line near the fissure indicates that dip-slip movement has occurred along a vertical fault surface that extends from the land surface to a depth of about 300 meters. Slip was 9 millimeters from May to December 1980 and also 9 millimeters from March to November 1981. Continuous measurements were made of horizontal movement across the fissure using a buried invar-wire horizontal extensometer, while water-level fluctuations were continuously monitored in four piezometers nested in two observation wells. The range of horizontal movement was 4.620 millimeters, and the range of water-level fluctuation in the nearest piezometer in the deep alluvium was 9.05 meters. The maximum annual opening of the fissure during the study period was 3.740 millimeters from March to October

The economics of pit and fissure sealants in preventive dentistry: a review.

PubMed

Kitchens, Dinah H

2005-08-15

Oral diseases are progressive, cumulative, and become more intricate to treat with advancement. While dental caries is an infectious transmissible disease with children being at the highest risk, primary prevention can reduce this risk. Primary prevention in dentistry is usually considered to be community fluoridated water supplies, professional fluoride treatments, and pit and fissure sealants. While community fluoridated water supplies have been proven to be cost-effective, the cost-effectiveness of pit and fissure sealants has primarily been studied in school-based programs of children from low socio-economic backgrounds. Dental sealant programs are just one way to help increase primary prevention in the oral health disparities of children. The purpose of this paper is to review the literature regarding the cost-effectiveness of pit and fissure sealants as a preventive strategy in preventive dentistry.

Noninvasive pit and fissure sealing: microtensile bond strength to intact bovine enamel of different pit and fissure sealants in a simplified fissure model.

PubMed

Papacchini, Federica; Cury, Alvaro H; Goracci, Cecilia; Chieffi, Nicoletta; Tay, Franklin R; Polimeni, Antonella; Ferrari, Marco

2006-12-01

To measure the microtensile bond strength of different pit and fissure sealants in a simplified fissure model. Twenty extracted bovine mandibular permanent incisors were randomly divided into 4 groups for treatment: G1: 35% phosphoric acid/Clinpro Sealant; G2: 35% phosphoric acid/Delton; G3: Non-Rinse Conditioner/Dyract Seal; G4: 20% polyacrylic acid/Fuji IILC. Each tooth was sectioned into 6 pieces (4 x 6 mm) of buccal enamel. SEM examination was used to confirm the presence of aprismatic enamel on each tooth. Using a spacer, two pieces of etched enamel were secured to a glass slide at a mean distance of 0.6+/-0.1 mm. The space between enamel substrates was then etched/conditioned and sealed with different materials according to the tested groups. By serially cutting each double-bonded sample, multiple beam-shaped specimens about 0.8mm(2) in cross section were obtained and tested in tension (0.5 mm/min) until failure occurred at either one of the two stressed interfaces. Failure modes were classified by stereomicroscopy. G1 and G2 showed statistically higher bond strengths than G3 and G4. G4 demonstrated the significantly lowest bond strength. Failures were mostly adhesive in G1, G2, G3, and mainly cohesive/mixed in G4. According to this model, resin-based materials (Clinpro Sealant, Delton) showed better microtensile bond strength than compomer (Dyract Seal) or resin-modified glass ionomer (Fuji IILC).

Subpial Hematoma and Extravasation in the Interhemispheric Fissure with Subarachnoid Hemorrhage

PubMed Central

Matsuoka, Go; Abe, Kayoko; Okada, Yoshikazu; Sakai, Shuji

2015-01-01

A recent report on computed tomography (CT) findings of contrast extravasation in subarachnoid hemorrhage (SAH) with Sylvian hematoma suggests that the occurrence of the hematoma is secondary to bleeding in the subpial space. Our patient was in his sixties and was admitted to the hospital because of loss of consciousness (Glasgow Coma Scale E4V1M4). SAH was diagnosed in plain head CT, and growing hematomas were observed in the Sylvian and interhemispheric fissures following a subarachnoid hemorrhage. CT angiography (CTA) using a dual-phase scan protocol revealed contrast extravasation in both the fissures in the latter phase, and hematoma in the interhemispheric fissure contained multiple bleeding points. This case indicates that the occurrence of subpial hematoma such as Sylvian hematoma can be a secondary event following subpial bleeding from damaged small vessels elsewhere in the cranium. Instead of four-dimensional (4D) CT, the dual-phase CTA technique may help detect minor extravasations with usual helical CT scanner. PMID:25963159

Storage, migration, and eruption of magma at Kilauea volcano, Hawaii, 1971-1972

USGS Publications Warehouse

Duffield, W.A.; Christiansen, R.L.; Koyanagi, R.Y.; Peterson, D.W.

1982-01-01

eruption may have been stored within the summit reservoir from 4 to 20 months before it was erupted in the summit caldera and along the southwest rift zone in August and September. The September 1971 activity was only the fourth eruption on the southwest rift zone during Kilauea's 200 years of recorded history, in contrast to more than 20 eruptions on the east rift zone. Order-of-magnitude differences in topographic and geophysical expression indicate greatly disparate eruption rates for far more than historic time and thus suggest a considerably larger dike swarm within the east rift zone than within the southwest rift zone. Characteristics of the historic eruptions on the southwest rift zone suggest that magma may be fed directly from active lava lakes in Kilauea Caldera or from shallow cupolas at the top of the summit magma reservoir, through fissures that propagate down rift from the caldera itself at the onset of eruption. Moreover, emplacement of this magma into the southwest rift zone may be possible only when compressive stress across the rift is reduced by some unknown critical amount owing either to seaward displacement of the terrane south-southeast of the rift zone or to a deflated condition of Mauna Loa Volcano adjacent to the northwest, or both. The former condition arises when the forceful emplacement of dikes into the east rift zone wedges the south flank of Kilauea seaward. Such controls on the potential for eruption along the southwest rift zone may be related to the topographic and geophysical constrasts between the two rift zones. ?? 1982.

Treatment of anal fissures using a combination of minoxidil and lignocaine: a randomized, double-blind trial.

PubMed

Muthukumarassamy, Rajakannu; Robinson, Smile S; Sarath, Sistla Chandra; Raveendran, R

2005-01-01

Anal fissures are associated with hypertonia of the internal anal sphincter and pain. We evaluated the efficacy of local application of a combination of minoxidil and lignocaine in healing anal fissures. In this prospective, randomized, double-blind study, 90 patients with anal fissure were recruited. Patients received local applications of ointments containing 5% lignocaine (n=28), 0.5% minoxidil (n=36), or both (n=26). Healing of anal fissure at 6 weeks was used as the primary end-point. Rates of complete healing of fissure were similar in the three groups (lignocaine alone 8/27, minoxidil alone 10/34, combination 7/22; p=ns). Mean (SD) time taken for complete healing with combination treatment [1.9 (0.6) weeks] was significantly shorter than that with minoxidil alone (3.1 [1.7] weeks; p=0.001) or with lignocaine alone (3.3 [0.8] weeks; p=0.002). Rates of pain relief were similar in the three groups. Stoppage of bleeding occurred more often with combination treatment than with lignocaine alone. No patient had systemic or local side effects. Combination treatment with minoxidil and lignocaine helps in faster healing of anal fissures and provides better symptomatic relief than either drug alone.

Elevated gas flux and trace metal degassing from the 2014-2015 fissure eruption at the Bárðarbunga volcanic system, Iceland

NASA Astrophysics Data System (ADS)

Gauthier, Pierre-Jean; Sigmarsson, Olgeir; Gouhier, Mathieu; Haddadi, Baptiste; Moune, Séverine

2016-03-01

The 2014 Bárðarbunga rifting event in Iceland resulted in a 6-month long eruption at Holuhraun. This eruption was characterized by high lava discharge rate and significant gas emission. The SO2 flux for the first 3 months was measured with satellite sensors and the petrologic method. High-resolution time series of the satellite data give 1200 kg/s that concurs with 1050 kg/s obtained from melt inclusion minus degassed lava sulfur contents scaled to the mass of magma produced. A high-purity gas sample, with elevated S/Cl due to limited chlorine degassing, reveals a similar degassing pattern of trace metals as observed at Kīlauea (Hawai'i) and Erta Ale (Ethiopia). This suggests a common degassing mechanism at mantle plume-related volcanoes. The trace metal fluxes, calculated from trace element to sulfur ratios in the gas sample and scaled to the sulfur dioxide flux, are 1-2 orders of magnitude stronger at Holuhraun than Kīlauea and Erta Ale. In contrast, volcanoes at convergent margins (Etna and Stromboli, Italy) have 1-2 orders of magnitude higher trace element fluxes, most likely caused by abundant chlorine degassing. This emphasizes the importance of metal degassing as chlorine species. Short-lived disequilibria between radon daughters, 210Pb-210Bi-210Po measured in the gas, suggest degassing of a continuously replenished magma batch beneath the eruption site. Earlier and deep degassing phase of carbon dioxide and polonium is inferred from low (210Po/210Pb) in the gas, consistent with magma transfer rate of 0.75 m/s.

An in vitro investigation of pre-treatment effects before fissure sealing.

PubMed

Bagheri, Mahshid; Pilecki, Peter; Sauro, Salvatore; Sherriff, Martyn; Watson, Timothy F; Hosey, Marie Therese

2017-11-01

Fissure sealants prevent occlusal caries in permanent molars. Enamel preparation methods are used before fissure sealing. To investigate effects of bioglass air-abrasion pre-treatment with and without an adhesive, on fissure enamel of permanent teeth, with respect to etchability, microleakage and microtensile bond strength. Half of the occlusal surfaces of 50 extracted premolars underwent bioglass air-abrasion. Dye was applied to the entire occlusal surface. Photographs were taken to score etched surface by dye uptake. Adhesive was applied to 25 of the bioglass-treated areas and all teeth were fissure sealed, sectioned, and evaluated using confocal microscopy. Buccal and lingual surfaces of a further eight premolars were acid-etched and randomly received: air-abrasion, adhesive, both, or none before sealant application for microtensile bond strength measurement in half of the samples immediately and half following 6 months of water immersion. Linear mixed models and multinomial logistic regression were used (P = 0.05). Bioglass air-abrasion significantly improved enamel etchability and reduced microleakage. The addition of an adhesive made no difference to either microleakage or microtensile bond strength. The combination of bioglass abrasion and adhesive led to more cohesive, rather than adhesive, failure. Bioglass air-abrasion improved enamel etchability and reduced microleakage irrespective of the adhesive use but neither pre-treatment affected the microtensile bond strength. © 2017 BSPD, IAPD and John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

Focal dilation and paradoxical collapse of cortical fissures and sulci in patients with normal-pressure hydrocephalus.

PubMed

Holodny, A I; George, A E; de Leon, M J; Golomb, J; Kalnin, A J; Cooper, P R

1998-11-01

The authors describe a subgroup of patients with shunt-proven normal-pressure hydrocephalus (NPH) who presented with focal fissural and sulcal dilation on imaging studies. The specific radiological features and methods of differentiating this condition from cortical atrophy are delineated. Normal-pressure hydrocephalus has been described as dilation of the ventricles that is out of proportion to the sulci. Sulcal dilation has been taken as evidence of cortical atrophy and has even been used as a criterion to exclude patients from undergoing a shunting procedure. The authors describe five cases of patients with shunt-proven NPH who presented with focal dilation of cortical fissures and sulci. In three of the cases, there was a paradoxical decrease in the size of the dilated fissures and sulci that paralleled the decrease in the size of the lateral ventricles following successful shunting. This study demonstrates that focal fissural and sulcal dilation may represent reservoirs of cerebrospinal fluid analogous to the ventricular system. Patients should not be denied a shunting procedure solely on the basis of focally dilated fissures of sulci.

Incorporating the eruptive history in a stochastic model for volcanic eruptions

NASA Astrophysics Data System (ADS)

Bebbington, Mark

2008-08-01

We show how a stochastic version of a general load-and-discharge model for volcanic eruptions can be implemented. The model tracks the history of the volcano through a quantity proportional to stored magma volume. Thus large eruptions can influence the activity rate for a considerable time following, rather than only the next repose as in the time-predictable model. The model can be fitted to data using point-process methods. Applied to flank eruptions of Mount Etna, it exhibits possible long-term quasi-cyclic behavior, and to Mauna Loa, a long-term decrease in activity. An extension to multiple interacting sources is outlined, which may be different eruption styles or locations, or different volcanoes. This can be used to identify an 'average interaction' between the sources. We find significant evidence that summit eruptions of Mount Etna are dependent on preceding flank eruptions, with both flank and summit eruptions being triggered by the other type. Fitted to Mauna Loa and Kilauea, the model had a marginally significant relationship between eruptions of Mauna Loa and Kilauea, consistent with the invasion of the latter's plumbing system by magma from the former.

Cyp1b1 Regulates Ocular Fissure Closure Through a Retinoic Acid–Independent Pathway

PubMed Central

Williams, Antionette L.; Eason, Jessica; Chawla, Bahaar; Bohnsack, Brenda L.

2017-01-01

Purpose Mutations in the CYP1B1 gene are the most commonly identified genetic causes of primary infantile-onset glaucoma. Despite this disease association, the role of CYP1B1 in eye development and its in vivo substrate remain unknown. In the present study, we used zebrafish to elucidate the mechanism by which cyp1b1 regulates eye development. Methods Zebrafish eye and neural crest development were analyzed using live imaging of transgenic zebrafish embryos, in situ hybridization, immunostaining, TUNEL assay, and methylacrylate sections. Cyp1b1 and retinoic acid (RA) levels were genetically (morpholino oligonucleotide antisense and mRNA) and pharmacologically manipulated to examine gene function. Results Using zebrafish, we observed that cyp1b1 was expressed in a specific spatiotemporal pattern in the ocular fissures of the developing zebrafish retina and regulated fissure patency. Decreased Cyp1b1 resulted in the premature breakdown of laminin in the ventral fissure and altered subsequent neural crest migration into the anterior segment. In contrast, cyp1b1 overexpression inhibited cell survival in the ventral ocular fissure and prevented fissure closure via an RA-independent pathway. Cyp1b1 overexpression also inhibited the ocular expression of vsx2, pax6a, and pax6b and increased the extraocular expression of shha. Importantly, embryos injected with human wild-type but not mutant CYP1B1 mRNA also showed colobomas, demonstrating the evolutionary and functional conservation of gene function between species. Conclusions Cyp1b1 regulation of ocular fissure closure indirectly affects neural crest migration and development through an RA-independent pathway. These studies provide insight into the role of Cyp1b1 in eye development and further elucidate the pathogenesis of primary infantile-onset glaucoma. PMID:28192799

Assessment of the potential respiratory hazard of volcanic ash from future Icelandic eruptions: A study of archived basaltic to rhyolitic ash samples

USGS Publications Warehouse

Damby, David; Horwell, Claire J.; Larsen, Gudrun; Thordarson, Thorvaldur; Tomatis, Maura; Fubini, Bice; Donaldson, Ken

2017-01-01

than silicic samples. All samples were non-reactive in a test of red blood cell-membrane damage. ConclusionsThe primary particle-specific concern is the potential for future eruptions of Iceland’s volcanoes to generate fine, respirable material and, thus, to increase ambient PM concentrations. This particularly applies to highly explosive silicic eruptions, but can also hold true for explosive basaltic eruptions or discrete events associated with basaltic fissure eruptions.

Assessment of the potential respiratory hazard of volcanic ash from future Icelandic eruptions: a study of archived basaltic to rhyolitic ash samples.

PubMed

Damby, David E; Horwell, Claire J; Larsen, Gudrun; Thordarson, Thorvaldur; Tomatis, Maura; Fubini, Bice; Donaldson, Ken

2017-09-11

. All samples were non-reactive in a test of red blood cell-membrane damage. The primary particle-specific concern is the potential for future eruptions of Iceland's volcanoes to generate fine, respirable material and, thus, to increase ambient PM concentrations. This particularly applies to highly explosive silicic eruptions, but can also hold true for explosive basaltic eruptions or discrete events associated with basaltic fissure eruptions.

The 1999 eruption of Shishaldin Volcano, Alaska: Monitoring a distant eruption

USGS Publications Warehouse

Nye, C.J.; Keith, T.E.C.; Eichelberger, J.C.; Miller, T.P.; McNutt, S.R.; Moran, S.; Schneider, D.J.; Dehn, J.; Schaefer, J.R.

2002-01-01

Shishaldin Volcano, in the central Aleutian volcanic arc, became seismically restless during the summer of 1998. Increasing unrest was monitored using a newly installed seismic network, weather satellites, and rare local visual observations. The unrest culminated in large eruptions on 19 April and 22-23 April 1999. The opening phase of the 19 April eruption produced a sub-Plinian column that rose to 16 km before rapidly dissipating. About 80 min into the 19 April event we infer that the eruption style transitioned to vigorous Strombolian fountaining. Exceptionally vigorous seismic tremor heralded the 23 April eruption, which produced a large thermal anomaly observable by satellite, but only a modest, 6-km-high plume. There are no ground-based visual observations of this eruption; however we infer that there was renewed, vigorous Strombolian fountaining. Smaller low-level ash-rich plumes were produced through the end of May 1999. The lava that erupted was evolved basalt with about 49% SiO2. Subsequent field investigations have been unable to find a distinction between deposits from each of the two major eruptive episodes.

Textural and geochemical constraints on eruptive style of the 79AD eruption at Vesuvius

NASA Astrophysics Data System (ADS)

Balcone-Boissard, Hélène; Boudon, Georges; Villemant, Benoît.

2010-05-01

The 79AD eruption of Vesuvius, also known as the "Pompeii eruption", is the reference for one of the explosive eruptive styles, the plinian-type eruption. The eruption involved H2O-rich phonolitic magmas and is commonly divided into three phases: an initial phreatomagmatic phase, followed by a plinian event which produced a thick pumice fallout deposit and a final phase that was dominated by numerous column-collapse events. During the plinian phase, a first white pumice fallout was produced from a high steady eruptive column, followed by a grey pumice fallout originated by an oscillatory eruptive column with several partial column collapse events. This study focuses on the pumice fallout deposits, sampled in a proximal thick section, at the Terzigno quarry, 6 km southeast of the present crater. In order to constrain the degassing processes and the eruptive dynamics, major element compositions, residual volatile contents (H2O, Cl) and textural characteristics (vesicularity and microcrystallinity) were studied. A previous study that we performed on the pre-eruptive Cl content has shown that Cl may be used as an indicator of magma saturation with Cl-rich fluids and of pre-eruptive pressures. Cl contents measured in melt inclusions show that only the white pumice and the upper part of the grey pumice magma were H2O saturated prior eruption. Large variations in residual volatile contents exist between the different eruptive units and textural features strongly differ between white and grey pumice clasts but also within the grey pumice clasts. The degassing processes were thus highly heterogeneous: the white pumice eruptive units represent a typical closed-system degassing evolution whereas the first grey pumice one, stored in the same pre-eruptive saturation conditions, follows a particular open-system degassing evolution. Here we propose a new model of the 79AD eruption where pre-eruptive conditions (H2O saturation, magma temperature and viscosity) are the critical

The Eruption Forecasting Information System: Volcanic Eruption Forecasting Using Databases

NASA Astrophysics Data System (ADS)

Ogburn, S. E.; Harpel, C. J.; Pesicek, J. D.; Wellik, J.

2016-12-01

Forecasting eruptions, including the onset size, duration, location, and impacts, is vital for hazard assessment and risk mitigation. The Eruption Forecasting Information System (EFIS) project is a new initiative of the US Geological Survey-USAID Volcano Disaster Assistance Program (VDAP) and will advance VDAP's ability to forecast the outcome of volcanic unrest. The project supports probability estimation for eruption forecasting by creating databases useful for pattern recognition, identifying monitoring data thresholds beyond which eruptive probabilities increase, and for answering common forecasting questions. A major component of the project is a global relational database, which contains multiple modules designed to aid in the construction of probabilistic event trees and to answer common questions that arise during volcanic crises. The primary module contains chronologies of volcanic unrest. This module allows us to query eruption chronologies, monitoring data, descriptive information, operational data, and eruptive phases alongside other global databases, such as WOVOdat and the Global Volcanism Program. The EFIS database is in the early stages of development and population; thus, this contribution also is a request for feedback from the community. Preliminary data are already benefitting several research areas. For example, VDAP provided a forecast of the likely remaining eruption duration for Sinabung volcano, Indonesia, using global data taken from similar volcanoes in the DomeHaz database module, in combination with local monitoring time-series data. In addition, EFIS seismologists used a beta-statistic test and empirically-derived thresholds to identify distal volcano-tectonic earthquake anomalies preceding Alaska volcanic eruptions during 1990-2015 to retrospectively evaluate Alaska Volcano Observatory eruption precursors. This has identified important considerations for selecting analog volcanoes for global data analysis, such as differences between

The effects of dietary biotin supplementation on vertical fissures of the claw wall in beef cattle.

PubMed Central

Campbell, J R; Greenough, P R; Petrie, L

2000-01-01

A clinical field trial was performed on a herd of Hereford beef cows in central Saskatchewan. The herd had a history of being severely affected with vertical fissures. The objective of the study was to determine the effects of supplemental dietary biotin on the prevalence of vertical fissures in beef cows. In June 1994 and June 1995, 1- and 2-year-old heifers were randomly allocated into 2 treatment groups, each composed of 79 animals. One group received a 10 mg/head/day biotin-supplemented free-choice mineral supplement, while the other groups received an identical free-choice mineral without the biotin supplementation. The claws from these animals were evaluated in June 1994, October 1994, June 1995, October 1995, and June 1996 for the presence of vertical fissures. Supplemental dietary biotin significantly increased serum levels of biotin and significantly increased claw hardness in supplemented cows. Both groups of heifers started the trial without vertical fissures. After 18 months, 15% of the cows fed supplemental dietary biotin had vertical fissures compared with 33% in the nonsupplemented group. The difference was statistically significant (P = 0.01). PMID:10992986

Holocene eruption history in Iceland - Eruption frequency vs. Tephra layer frequency

NASA Astrophysics Data System (ADS)

Oladottir, B. A.; Larsen, G.

2012-12-01

Volcanic deposits of all kinds are used to reconstruct eruption history of volcanoes and volcanic zones. In Iceland tephra is the ideal volcanic deposit to study eruption history as two out of every three eruptions taking place there during the last 11 centuries have been explosive, leaving tephra as their only product. If eruptions producing both lava and tephra are included three out of every four eruptions have produced tephra. Tephra dispersal and deposition depends on factors such as eruption magnitude, eruption cloud height, duration of eruption and prevailing wind directions at the time of eruption. Several outcrops around a particular volcano must therefore be measured to obtain optimal information of its eruption history. Vegetation in the area of deposition is also of great importance for its preservation. Tephra deposited on un-vegetated land is rapidly eroded by wind and water, and deposits up to few tens of cm thickness may be lost from the record. Such tephra deposited on grassy or forested land is at least partly sheltered from the wind after deposition. Soon after tephra deposition (how soon depends on tephra thickness) the root system of the vegetation creates an even better shelter for the tephra and when this stage is reached the tephra is preserved in the soil for millennia, given that no soil erosion takes place. Vegetation is often boosted in the first years after tephra deposition which in turn helps tephra preservation. A setback of using soil sections for reconstructing Holocene eruption history is the lack of soil at the beginning of the era but for that time period tephra records in lake and marine sediments can be used. When tephra stratigraphy in soil sections is measured to study eruption history and eruption frequency of a volcano it must be kept in mind that what is seen is in fact the tephra layer frequency. One section only shows tephra layers deposited in that location and more importantly only the layers preserved there. The

Anal sphincter fibrillation: is this a new finding that identifies resistant chronic anal fissures that respond to botulinum toxin?

PubMed

Moon, A; Chitsabesan, P; Plusa, S

2013-08-01

Anal fissures can be resistant to treatment and some patients may undergo several trials of medical therapy before definitive surgery. It would be useful to identify predictors of poor response to medical therapy. This study assesses the role of anorectal physiological criteria to identify patients with anal fissure predicted to fail botulinum toxin (BT) treatment. A retrospective analysis of anorectal physiological data collected for patients with resistant chronic anal fissures, referred to one consultant surgeon between 2007 and 2011, was undertaken. These were correlated with treatment plans and healing rates. Twenty-five patients with idiopathic chronic anal fissures underwent anorectal physiology studies and were subsequently treated with BT injection. Eleven had a characteristic high-frequency low-amplitude 'saw tooth' waveform or anal sphincter fibrillation (ASF) and higher anal sphincter pressures. Nine (82%) of these patients had resolution of their anal fissure symptoms following treatment with BT. Of 14 patients with no evidence of ASF and a greater range of anal sphincter pressures, only one (7%) had resolution following BT. ASF appears to be an anorectal physiological criterion that helps predict response of anal fissures to BT injection. This could help streamline fissure management. © 2013 The Authors. Colorectal Disease © 2013 The Association of Coloproctology of Great Britain and Ireland.

Large, Moderate or Small? The Challenge of Measuring Mass Eruption Rates in Volcanic Eruptions

NASA Astrophysics Data System (ADS)

Gudmundsson, M. T.; Dürig, T.; Hognadottir, T.; Hoskuldsson, A.; Bjornsson, H.; Barsotti, S.; Petersen, G. N.; Thordarson, T.; Pedersen, G. B.; Riishuus, M. S.

2015-12-01

The potential impact of a volcanic eruption is highly dependent on its eruption rate. In explosive eruptions ash may pose an aviation hazard that can extend several thousand kilometers away from the volcano. Models of ash dispersion depend on estimates of the volcanic source, but such estimates are prone to high error margins. Recent explosive eruptions, including the 2010 eruption of Eyjafjallajökull in Iceland, have provided a wealth of data that can help in narrowing these error margins. Within the EU-funded FUTUREVOLC project, a multi-parameter system is currently under development, based on an array of ground and satellite-based sensors and models to estimate mass eruption rates in explosive eruptions in near-real time. Effusive eruptions are usually considered less of a hazard as lava flows travel slower than eruption clouds and affect smaller areas. However, major effusive eruptions can release large amounts of SO2 into the atmosphere, causing regional pollution. In very large effusive eruptions, hemispheric cooling and continent-scale pollution can occur, as happened in the Laki eruption in 1783 AD. The Bárdarbunga-Holuhraun eruption in 2014-15 was the largest effusive event in Iceland since Laki and at times caused high concentrations of SO2. As a result civil protection authorities had to issue warnings to the public. Harmful gas concentrations repeatedly persisted for many hours at a time in towns and villages at distances out to 100-150 km from the vents. As gas fluxes scale with lava fluxes, monitoring of eruption rates is therefore of major importance to constrain not only lava but also volcanic gas emissions. This requires repeated measurements of lava area and thickness. However, most mapping methods are problematic once lava flows become very large. Satellite data on thermal emissions from eruptions have been used with success to estimate eruption rate. SAR satellite data holds potential in delivering lava volume and eruption rate estimates

Structure, stratigraphy, and eruption dynamics of a young tuff ring: Hanauma Bay, O'ahu, Hawai'i

NASA Astrophysics Data System (ADS)

Rottas, K. M.; Houghton, B. F.

2012-09-01

The Hanauma Bay-Koko Head complex is one of several young volcanic landforms along the Koko fissure, in southeastern O'ahu. The Hanauma Bay region of the complex comprises two nested tuff rings, inner and outer Hanauma Bay, and multiple smaller vents. The internal structure of the inner tuff ring, well exposed due to subsequent breaching by the ocean and wave erosion, indicates that it formed during a minimum of five distinct phases of deposition that produced five mappable units. Significant inward collapses generated major unconformities that separate the units exposed in the inner wall. The planes of failure are cut by narrow steep-walled, locally overhung channels and gullies, suggesting that the collapse events were each followed by short time breaks during which the deposits were eroded by rainfall runoff. Within each pyroclastic unit, there are many local slump scars and unconformities, suggesting that minor instability of the inner wall was a near-constant feature. From bedding sags and surge bed forms, it is apparent that the vent shifted at least twice during tuff ring growth. Ballistic blocks in the youngest unit indicate that the eruption overlapped in time with a separate eruption to the north, most likely to be that of the Kahauloa tuff ring 880 m away.

European Fissure Sealant Guidelines: assessment using AGREE II.

PubMed

San Martin-Galindo, L; Rodríguez-Lozano, F J; Abalos-Labruzzi, C; Niederman, R

2017-02-01

Pit and fissure sealants are effective in reducing the incidence of occlusal caries, and multiple clinical practice guidelines (CPGs) have been developed for recommending their proper use. The usefulness of CPGs depends on their quality and on the rigour of the guideline development process. A study was made to assess the quality of current European CPGs based on the Appraisal of Guidelines for Research and Evaluation (AGREE II) instrument, which uses 23 key items rated on a 7-point scale to assess practice guideline development and the quality of reporting. A search was conducted for fissure sealant guidelines for preventing caries in children and adults at high and low risk published in the last 10 years. Calibration was carried out before scoring to assess agreement between the appraisers using the AGREE II instrument. The searches identified 19 relevant guidelines, and following application of the inclusion/exclusion criteria, three guidelines were retained for evaluation. The proportion of observed agreement was calculated, expressed by the agreement separately for positive and negative ratings (PA = 0.89, NA = 0-91). The results of the guideline assessments revealed the highest score for the Irish guideline, a moderate score for the French guideline and the lowest score for the European guideline. Based on the AGREE II instrument, the results obtained show significant variation in the quality assessment of the three European Fissure Sealant Guidelines. Future studies should be carried out both to develop quality dental CPGs and to investigate effective ways of adopting them. © 2015 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

Magma degassing and eruption dynamics of the Avellino pumice Plinian eruption of Somma-Vesuvius (Italy). Comparison with the Pompeii eruption

NASA Astrophysics Data System (ADS)

Balcone-Boissard, H.; Boudon, G.; Ucciani, G.; Villemant, B.; Cioni, R.; Civetta, L.; Orsi, G.

2012-05-01

The eruptive history of Mt. Somma-Vesuvius is characterised by large explosive events: Pomici di Base eruption (22,030 ± 175 yr cal BP), Mercato (8890 ± 90 yr cal BP), Avellino (3945 ± 10 yr cal BP) and Pompeii (79 AD). Pre-eruptive conditions and sin-eruptive degassing processes of the Avellino eruption, the highest-magnitude Plinian event, have been investigated, using volatile contents (F, Cl, H2O) in melt inclusions and residual glass, and textural characteristics of pumice clasts of the 9 fallout layers sampled in detail in a representative sequence. The sequence displays an up-section sharp colour change from white to grey, corresponding to variations in both magma composition and textural characteristics. The pre-eruptive conditions have been constrained by systematic measurements of Cl content in both melt inclusions and matrix glass of pumice clasts. The pumice glass composition varies from Na-rich phonolite (white pumice) to K-rich phonolite (grey pumice). The measured Cl values constantly cluster at 5200 ± 400 ppm (buffer value), whatever the composition of the melt, suggesting that the entire magma body was saturated with sub-critical fluids. This Cl saturation constrains the pre-eruptive pressures and maximum H2O contents at 200 ± 10 MPa and 6.3 ± 0.2 wt.% H2O for the white pumice melt and 195 ± 15 MPa and 5.2 ± 0.2 wt.% H2O for the grey pumice melt. The fluid phase, mainly composed of a H2O-rich vapour phase and brine, probably accumulated at the top of the reservoir and generated an overpressure able to trigger the onset of the eruption. Magma degassing was rather homogeneous for the white and grey eruptive units, mostly occurring through closed-system processes, leading to a typical Plinian eruptive style. A steady-state withdrawal of an H2O-saturated magma may explain the establishment of a sustained Plinian column. Variation from white to grey pumice is accompanied by decrease of mean vesicularity and increase of mean microcrystallinity

A comparison between three different pit and fissure sealants with regard to marginal integrity.

PubMed

Fernandes, Kristlee Sabrin; Chalakkal, Paul; de Ataide, Ida de Noronha; Pavaskar, Rajdeep; Fernandes, Precylia Philo; Soni, Harleen

2012-04-01

THE AIM OF THIS STUDY IS TO COMPARE THE OCCURRENCE OF ENAMEL FRACTURES, SEALANT FRACTURES AND MARGINAL FISSURES AFTER PLACEMENT OF THREE SEALANTS: Helioseal F, Conseal F and Clinpro. Thirty individuals between 13 and 15 years of age, diagnosed with pit and fissure caries by visual and DIAGNOdent examination, were chosen for sealant placement on their mandibular molars. The sealants were placed at random, after which, impressions were made with polyvinyl siloxane and casts were fabricated. Dies were prepared, each of which were sputter coated with gold in order to be examined under a scanning electron microscope. The following morphologies were analyzed from dies from each of the sealant groups: Continuous margins, sealant fractures, marginal fissures and enamel fractures. After six months, they were recalled for impression making. Dies were prepared and microscopically analyzed as mentioned. Based on the time of evaluation, there were two groups: Initial group (soon after placement) and final group (after six months). Statistical analysis was done using the paired 't' test and One-way analysis of variance (ANOVA). Clinpro had the greatest fracture resistance, followed by Conseal F and Helioseal F. The occurrence of marginal fissure was found to be least with Clinpro.

An Experimental and Numerical Study on Cracking Behavior of Brittle Sandstone Containing Two Non-coplanar Fissures Under Uniaxial Compression

NASA Astrophysics Data System (ADS)

Yang, Sheng-Qi; Tian, Wen-Ling; Huang, Yan-Hua; Ranjith, P. G.; Ju, Yang

2016-04-01

To understand the fracture mechanism in all kinds of rock engineering, it is important to investigate the fracture evolution behavior of pre-fissured rock. In this research, we conducted uniaxial compression experiments to evaluate the influence of ligament angle on the strength, deformability, and fracture coalescence behavior of rectangular prismatic specimens (80 × 160 × 30 mm) of brittle sandstone containing two non-coplanar fissures. The experimental results show that the peak strength of sandstone containing two non-coplanar fissures depends on the ligament angle, but the elastic modulus is not closely related to the ligament angle. With the increase of ligament angle, the peak strength decreased at a ligament angle of 60°, before increasing up to our maximum ligament angle of 120°. Crack initiation, propagation, and coalescence were all observed and characterized from the inner and outer tips of pre-existing non-coplanar fissures using photographic monitoring. Based on the results, the sequence of crack evolution in sandstone containing two non-coplanar fissures was analyzed in detail. In order to fully understand the crack evolution mechanism of brittle sandstone, numerical simulations using PFC2D were performed for specimens containing two non-coplanar fissures under uniaxial compression. The results are in good agreement with the experimental results. By analyzing the stress field, the crack evolution mechanism in brittle sandstone containing two non-coplanar fissures under uniaxial compression is revealed. These experimental and numerical results are expected to improve the understanding of the unstable fracture mechanism of fissured rock engineering structures.

Monitoring of land subsidence and ground fissures in Xian, China 2005-2006: Mapped by sar Interferometry

USGS Publications Warehouse

Zhao, C.Y.; Zhang, Q.; Ding, X.-L.; Lu, Z.; Yang, C.S.; Qi, X.M.

2009-01-01

The City of Xian, China, has been experiencing significant land subsidence and ground fissure activities since 1960s, which have brought various severe geohazards including damages to buildings, bridges and other facilities. Monitoring of land subsidence and ground fissure activities can provide useful information for assessing the extent of, and mitigating such geohazards. In order to achieve robust Synthetic Aperture Radar Interferometry (InSAR) results, six interferometric pairs of Envisat ASAR data covering 2005–2006 are collected to analyze the InSAR processing errors firstly, such as temporal and spatial decorrelation error, external DEM error, atmospheric error and unwrapping error. Then the annual subsidence rate during 2005–2006 is calculated by weighted averaging two pairs of D-InSAR results with similar time spanning. Lastly, GPS measurements are applied to calibrate the InSAR results and centimeter precision is achieved. As for the ground fissure monitoring, five InSAR cross-sections are designed to demonstrate the relative subsidence difference across ground fissures. In conclusion, the final InSAR subsidence map during 2005–2006 shows four large subsidence zones in Xian hi-tech zones in western, eastern and southern suburbs of Xian City, among which two subsidence cones are newly detected and two ground fissures are deduced to be extended westward in Yuhuazhai subsidence cone. This study shows that the land subsidence and ground fissures are highly correlated spatially and temporally and both are correlated with hi-tech zone construction in Xian during the year of 2005–2006.

21 CFR 872.3765 - Pit and fissure sealant and conditioner.

Code of Federal Regulations, 2012 CFR

2012-04-01

... (CONTINUED) MEDICAL DEVICES DENTAL DEVICES Prosthetic Devices § 872.3765 Pit and fissure sealant and... depressions (faults in the enamel) in the biting surfaces of teeth to prevent cavities. (b) Classification...

21 CFR 872.3765 - Pit and fissure sealant and conditioner.

Code of Federal Regulations, 2013 CFR

2013-04-01

... (CONTINUED) MEDICAL DEVICES DENTAL DEVICES Prosthetic Devices § 872.3765 Pit and fissure sealant and... depressions (faults in the enamel) in the biting surfaces of teeth to prevent cavities. (b) Classification...

Medical and surgical treatment of haemorrhoids and anal fissure in Crohn's disease: a critical appraisal.

PubMed

D'Ugo, Stefano; Franceschilli, Luana; Cadeddu, Federica; Leccesi, Laura; Blanco, Giovanna Del Vecchio; Calabrese, Emma; Milito, Giovanni; Di Lorenzo, Nicola; Gaspari, Achille L; Sileri, Pierpaolo

2013-03-11

The principle to avoid surgery for haemorrhoids and/or anal fissure in Crohn's disease (CD) patients is still currently valid despite advances in medical and surgical treatments. In this study we report our prospectively recorded data on medical and surgical treatment of haemorrhoids and anal fissures in CD patients over a period of 8 years. Clinical data of patients affected by perianal disease were routinely and prospectively inserted in a database between October 2003 and October 2011 at the Department of Surgery, Tor Vergata University Hospital, Rome. We reviewed and divided in two groups records on CD patients treated either medically or surgically according to the diagnosis of haemorrhoids or anal fissures. Moreover, we compared in each group the outcome in patients with prior diagnosis of CD and in patients diagnosed with CD only after perianal main treatment. Eighty-six CD patients were included in the study; 45 were treated for haemorrhoids and 41 presented with anal fissure. Conservative approach was initially adopted for all patients; in case of medical treatment failure, the presence of stable intestinal disease made them eligible for surgery. Fifteen patients underwent haemorrhoidectomy (open 11; closed 3; stapled 1), and two rubber band ligation. Fourteen patients required surgery for anal fissure (Botox ± fissurectomy 8; LIS 6). In both groups we observed high complication rate, 41.2% for haemorrhoids and 57.1% for anal fissure. Patients who underwent haemorrhoidectomy without certain diagnosis of CD had significantly higher risk of complications. Conservative treatment of proctologic diseases in CD patients has been advocated given the high risk of complications and the evidence that spontaneous healing may also occur. From these preliminary results a role of surgery is conceivable in high selected patients, but definitve conclusions can't be made. Further randomized trials are needed to establish the efficacy of the surgical approach, giving

Large explosive basaltic eruptions at Katla volcano, Iceland: Fragmentation, grain size and eruption dynamics

NASA Astrophysics Data System (ADS)

Schmith, Johanne; Höskuldsson, Ármann; Holm, Paul Martin; Larsen, Guðrún

2018-04-01

Katla volcano in Iceland produces hazardous large explosive basaltic eruptions on a regular basis, but very little quantitative data for future hazard assessments exist. Here details on fragmentation mechanism and eruption dynamics are derived from a study of deposit stratigraphy with detailed granulometry and grain morphology analysis, granulometric modeling, componentry and the new quantitative regularity index model of fragmentation mechanism. We show that magma/water interaction is important in the ash generation process, but to a variable extent. By investigating the large explosive basaltic eruptions from 1755 and 1625, we document that eruptions of similar size and magma geochemistry can have very different fragmentation dynamics. Our models show that fragmentation in the 1755 eruption was a combination of magmatic degassing and magma/water-interaction with the most magma/water-interaction at the beginning of the eruption. The fragmentation of the 1625 eruption was initially also a combination of both magmatic and phreatomagmatic processes, but magma/water-interaction diminished progressively during the later stages of the eruption. However, intense magma/water interaction was reintroduced during the final stages of the eruption dominating the fine fragmentation at the end. This detailed study of fragmentation changes documents that subglacial eruptions have highly variable interaction with the melt water showing that the amount and access to melt water changes significantly during eruptions. While it is often difficult to reconstruct the progression of eruptions that have no quantitative observational record, this study shows that integrating field observations and granulometry with the new regularity index can form a coherent model of eruption evolution.

Tracer Movement in a Single Fissure in Granitic Rock: Some Experimental Results and Their Interpretation

NASA Astrophysics Data System (ADS)

Neretnieks, Ivars; Eriksen, Tryggve; TäHtinen, PäIvi

1982-08-01

Radionuclide migration was studied in a natural fissure in a granite core. The fissure was oriented parallel to the axis in a cylindrical core 30 cm long and 20 cm in diameter. The traced solution was injected at one end of the core and collected at the other. Breakthrough curves were obtained for the nonsorbing tracers, tritiated water, and a large-molecular-weight lignosulphonate molecule and for the sorbing tracers, cesium and strontium. From the breakthrough curves for the nonsorbing tracers it could be concluded that channeling occurs in the single fissure. A `dispersion' model based on channeling is presented. The results from the sorbing tracers indicate that there is substantial diffusion into and sorption in the rock matrix. Sorption on the surface of the fissure also accounts for a part of the retardation effect of the sorbing species. A model which includes the mechanisms of channeling, surface sorption, matrix diffusion, and matrix sorption is presented. The experimental breakthrough curves can be fitted fairly well by this model by use of independently obtained data on diffusivities and matrix sorption.

Magma Reservoir Processes Revealed by Geochemistry of the Ongoing East Rift Zone Eruption, Kilauea Volcano, Hawaii

NASA Astrophysics Data System (ADS)

Thornber, C. R.

2002-12-01

Geochemical data were examined for a suite of 1,000 near-vent lava samples from the Pu`u `O`o-Kupaianaha eruption of Kilauea, collected from January 1983 through October 2001. Bulk lava and glass compositions reveal short- and long-term changes in pre-eruptive magma conditions that can be correlated with changes in edifice deformation, shallow magma transfer and eruptive behavior. Two decades of eruption on Kilauea's east rift zone has yielded ~2 km3 of lava, 97% of which is sparsely olivine-phyric with an MgO range of 6.8 to 9.6 wt%. During separate brief intervals of low-volume, fissure eruption (episodes 1 to 3 and 54), isolated rift-zone reservoirs with lower-MgO and olv-cpx-plg-phryic magma were incorporated by more mafic magma immediately prior to eruption. During prolonged, near-continuous eruption(e.g.,episodes 48-53 and most of 55), steady-state effusion is marked by cyclic variations in olivine-saturated magma chemistry. Bulk lava MgO and eruption temperature vary in cycles of monthly to bi-annual frequency, while olivine-incompatible elements vary inversely to these cycles. However, MgO-normalized values and ratios of highly to moderately incompatible elements (HINCE/MINCE), which nullify olivine fractionation effects, reveal cycles in magma chemistry that occur prior to olivine crystallization over the magmatic temperature range that is tapped by this eruption (1205-1155°C). These short-term cycles are superimposed on a long-term decrease of HINCE/MINCE, which is widely thought to reflect a 20-year change in mantle-source conditions. While HINCE/MINCE variation in primitive recharge magma cannot be ruled out, the short-term fluctuations of this signature may require unreasonably complex mantle variations. Alternatively, the correspondence of HINCE/MINCE cycles with edifice deformation and eruptive behavior suggests that the long-term evolving magmatic condition is a result of prolonged succession of short-term shallow magmatic events. The consistent

Seismic anisotropy and its precursory change before eruptions at Piton de la Fournaise volcano, La Réunion

NASA Astrophysics Data System (ADS)

Savage, M. K.; Ferrazzini, V.; Peltier, A.; Rivemale, E.; Mayor, J.; Schmid, A.; Brenguier, F.; Massin, F.; Got, J.-L.; Battaglia, J.; DiMuro, A.; Staudacher, T.; Rivet, D.; Taisne, B.; Shelley, A.

2015-05-01

The Piton de la Fournaise volcano exhibits frequent eruptions preceded by seismic swarms and is a good target to test hypotheses about magmatically induced variations in seismic wave properties. We use a permanent station network and a portable broadband network to compare seismic anisotropy measured via shear wave splitting with geodetic displacements, ratios of compressional to shear velocity (Vp/Vs), earthquake focal mechanisms, and ambient noise correlation analysis of surface wave velocities and to examine velocity and stress changes from 2000 through 2012. Fast directions align radially to the central cone and parallel to surface cracks and fissures, suggesting stress-controlled cracks. High Vp/Vs ratios under the summit compared with low ratios under the flank suggest spatial variations in the proportion of fluid-filled versus gas-filled cracks. Secular variations of fast directions (ϕ) and delay times (dt) between split shear waves are interpreted to sense changing crack densities and pressure. Delay times tend to increase while surface wave velocity decreases before eruptions. Rotations of ϕ may be caused by changes in either stress direction or fluid pressure. These changes usually correlate with GPS baseline changes. Changes in shear wave splitting measurements made on multiplets yield several populations with characteristic delay times, measured incoming polarizations, and fast directions, which change their proportion as a function of time. An eruption sequence on 14 October 2010 yielded over 2000 shear wave splitting measurements in a 14 h period, allowing high time resolution measurements to characterize the sequence. Stress directions from a propagating dike model qualitatively fit the temporal change in splitting.

Stratigraphy, paleoenvironment and emplacement mechanisms of the Koko fissure craters, O'ahu, Hawai'i

NASA Astrophysics Data System (ADS)

Skilling, I. P.; Bluth, J.; Simoneau, E.

2011-12-01

The Koko fissure craters are aligned and nested basanitic tuff cones and rings at the SE corner of O'ahu, Hawai'i. There are no published studies of their stratigraphy, emplacement mechanisms or depositional paleoenvironments. This study focuses on a tuff cone complex (Koko Crater) and a younger adjacent nested tuff ring (Hanauma Bay). A detailed stratigraphy with logged sections for both Koko Crater and the Hanauma Bay craters are presented and discussed. Koko Crater is dominated by wet fallout deposits on steep proximal slopes, commonly resedimented by hot (vesiculated) and cold (unvesiculated) debris flows, slumps and slides, but with an increasing percentage of wet (low temperature) low concentration PDC deposits preserved in the shallowly-dipping flanking apron deposits, and in the uppermost proximal deposits. At least two earlier cone or ring rims are preserved along its southern margin. The deposits of Hanauma Bay overlie the Koko deposits and are dominated by a mix of wet low concentration PDC, wet fallout and synchronous PDC, and fallout deposits in proximal settings, and by low concentration, probably drier, PDC deposits in more distal settings. The Hanauma Bay rings were emplaced before the Koko Crater tephra was consolidated, as steep-sided rills incised into Koko tephra are locally filled with tephra of mixed Koko and Hanauma sources. The onset of Hanauma Bay eruptions is marked by a horizon that is very rich in rounded coral sand clasts. Discontinuous horizons and lenses of coral block fallout are also very common in the Hanauma tephra. Coral sand is absent and coral blocks are much rarer in the Koko tephra. These observations, and probably also the dominance of wet fallout at Koko, imply that Koko was erupted in deeper water than the nearshore coral beach environment of the Hanauma rings. A faster rate of water recharge into the conduit in deeper open water is probably the most important factor in the generation of a cone rather than a ring at this

Microleakage and penetration depth of different fissure sealant materials after cyclic thermo-mechanic and brushing simulation.

PubMed

Hatirli, Hüseyin; Yasa, Bilal; Yasa, Elif

2018-01-30

The aim of the study was to evaluate microleakage and the penetration-depths of different fissure-sealant materials applied with/without enameloplasty after cyclic aging. One-hundred-sixty mandibular molars were divided into non-invasive and enameloplasty preparation groups and eight material subgroups, including: flowable composites (microhyrid, nanohybrid, and nanofilled), three resin-based (unfilled, filled, and highly-filled), a giomer-based, and a glass-ionomer-based fissure sealant. Specimens were subjected to two-year cyclic chewing and brushing simulation. After 5% basic-fuchsin dye penetration, specimens were sectioned and scored under stereomicroscope. Kruskal-Wallis statistical data showed that preparation type significantly affected the penetration of all tested materials (p<0.05), but not significantly affected microleakage (p>0.05). Flowable composites showed the best and the glass-ionomer-based sealant showed the worst penetration and microleakage. Slight preparation of fissures is not important in microleakage. However, enameloplasty significantly enhanced the depth of penetration of the sealants. Flowable composites offer promising results at the fissure sealing.

Sylvian fissure lipoma with angiomatous component and associated brain malformation: A case report.

PubMed

Thakur, Shruti; Sood, Ram Gopal; Jhobta, Anupam; Makhaik, Sushma; Thakur, Charusmita

2013-01-01

Intracranial lipomas are congenital malformations. These uncommon lesions have an incidence of 0.1 to 1.7% of all intracranial tumors. Most cases are located at midline and 5% are along the sylvian fissures. If symptomatic, seizures are the most common symptom. These tumors are slow growing and have favorable outcome. We report a case of a 25-year-old man whose CT and MRI revealed a lesion in right sylvian fissure suggesting a lipoma with abnormal vasculature and overlying cortical dysplasia.

Solar Prominence Eruption

NASA Technical Reports Server (NTRS)

Moore, Ronald L.

1998-01-01

The prominence that erupts in a prominence eruption is a magnetic structure in the chromosphere and corona. It is visible in chromospheric images by virtue of chromospheric-temperature plasma suspended in the magnetic field, and belongs to that large class of magnetic structures appropriately called filaments because of their characteristic sinewy sigmoidal form. Hence, the term "filament eruption" is used interchangeably with the term "prominence eruption". The magnetic field holding a filament is prone to undergo explosive changes in configuration. In these upheavals, because the filament material is compelled by its high conductivity to ride with the magnetic field that threads it, this material is a visible tracer of the field motion. The part of the magnetic explosion displayed by the entrained filament material is the phenomenon known as a filament eruption, the topic of this article. This article begins with a description of basic observed characteristics of filament eruptions, with attention to the magnetic fields, flares, and coronal mass ejections in which erupting filaments are embedded. The present understanding of these characteristics in terms of the form and action of the magnetic field is then laid out by means of a rudimentary three-dimensional model of the field. The article ends with basic questions that this picture leaves unresolved and with remarks on the observations needed to probe these questions.

Primary failure of eruption: further characterization of a rare eruption disorder.

PubMed

Frazier-Bowers, Sylvia A; Koehler, Karen E; Ackerman, James L; Proffit, William R

2007-05-01

Posterior open bite has several possible causes, including primary failure of eruption (PFE) that affects all teeth distal to the most mesial involved tooth, mechanical failure of eruption (MFE) (primarily ankylosis) that affects only the involved tooth or teeth, and soft-tissue interferences with eruption (other). Radiographs and other clinical records for 97 cases of failure of posterior eruption submitted for consultation were analyzed to further characterize PFE and distinguish it from MFE. Of the 97 cases, 38 were judged to be clear-cut PFE; 19 were diagnosed as MFE; 32 were classified as indeterminate failure because they were too young to be certain of the distinction between PFE and MFE; and 8 were placed in the "other" category. Two subtypes of PFE were observed. In type 1, eruption failure occurred at or near the same time for all teeth in an affected quadrant. In type 2, a gradient of the time of failure was present, so that some further development of the teeth posterior to the most mesial affected tooth was observed before eruption failure. A family history of eruption problems was noted in 10 of the 38 PFE subjects (26%), and a pedigree analysis was done for 4 families. This was consistent with autosomal dominant transmission. The distinction between PFE and MFE is clinically important because it determines whether all posterior teeth, or only individual affected teeth, will not respond to orthodontic force. Certain diagnosis often requires progress radiographs so that the pattern of eruption of teeth distal to the most mesial affected tooth can be observed.

Impact de la preparation des anodes crues et des conditions de cuisson sur la fissuration dans des anodes denses

NASA Astrophysics Data System (ADS)

Amrani, Salah

La fabrication de l'aluminium est realisee dans une cellule d'electrolyse, et cette operation utilise des anodes en carbone. L'evaluation de la qualite de ces anodes reste indispensable avant leur utilisation. La presence des fissures dans les anodes provoque une perturbation du procede l'electrolyse et une diminution de sa performance. Ce projet a ete entrepris pour determiner l'impact des differents parametres de procedes de fabrication des anodes sur la fissuration des anodes denses. Ces parametres incluent ceux de la fabrication des anodes crues, des proprietes des matieres premieres et de la cuisson. Une recherche bibliographique a ete effectuee sur tous les aspects de la fissuration des anodes en carbone pour compiler les travaux anterieurs. Une methodologie detaillee a ete mise au point pour faciliter le deroulement des travaux et atteindre les objectifs vises. La majorite de ce document est reservee pour la discussion des resultats obtenus au laboratoire de l'UQAC et au niveau industriel. Concernant les etudes realisees a l'UQAC, une partie des travaux experimentaux est reservee a la recherche des differents mecanismes de fissuration dans les anodes denses utilisees dans l'industrie d'aluminium. L'approche etait d'abord basee sur la caracterisation qualitative du mecanisme de la fissuration en surface et en profondeur. Puis, une caracterisation quantitative a ete realisee pour la determination de la distribution de la largeur de la fissure sur toute sa longueur, ainsi que le pourcentage de sa surface par rapport a la surface totale de l'echantillon. Cette etude a ete realisee par le biais de la technique d'analyse d'image utilisee pour caracteriser la fissuration d'un echantillon d'anode cuite. L'analyse surfacique et en profondeur de cet echantillon a permis de voir clairement la formation des fissures sur une grande partie de la surface analysee. L'autre partie des travaux est basee sur la caracterisation des defauts dans des echantillons d'anodes crues

Mechanical Behavior of Brittle Rock-Like Specimens with Pre-existing Fissures Under Uniaxial Loading: Experimental Studies and Particle Mechanics Approach

NASA Astrophysics Data System (ADS)

Cao, Ri-hong; Cao, Ping; Lin, Hang; Pu, Cheng-zhi; Ou, Ke

2016-03-01

Joints and fissures with similar orientation or characteristics are common in natural rocks; the inclination and density of the fissures affect the mechanical properties and failure mechanism of the rock mass. However, the strength, crack coalescence pattern, and failure mode of rock specimens containing multi-fissures have not been studied comprehensively. In this paper, combining similar material testing and discrete element numerical method (PFC2D), the peak strength and failure characteristics of rock-like materials with multi-fissures are explored. Rock-like specimens were made of cement and sand and pre-existing fissures created by inserting steel shims into cement mortar paste and removing them during curing. The peak strength of multi-fissure specimens depends on the fissure angle α (which is measured counterclockwise from horizontal) and fissure number ( N f). Under uniaxial compressional loading, the peak strength increased with increasing α. The material strength was lowest for α = 25°, and highest for α = 90°. The influence of N f on the peak strength depended on α. For α = 25° and 45°, N f had a strong effect on the peak strength, while for higher α values, especially for the 90° sample, there were no obvious changes in peak strength with different N f. Under uniaxial compression, the coalescence modes between the fissures can be classified into three categories: S-mode, T-mode, and M-mode. Moreover, the failure mode can be classified into four categories: mixed failure, shear failure, stepped path failure, and intact failure. The failure mode of the specimen depends on α and N f. The peak strength and failure modes in the numerically simulated and experimental results are in good agreement.

Are Avellino (4365 cal BP) and Pompeii twin plinian eruptions? Pre-eruptive constraints and degassing history

NASA Astrophysics Data System (ADS)

Boudon, Georges; Balcone-Boissard, Hélène; Villemant, Benoît.; Ucciani, Guillaume; Cioni, Raffaello

2010-05-01

Somma-Vesuvius activity started 35 ky ago and is characterized by numerous eruptions of variable composition and eruptive style, sometimes interrupted by long periods of unrest. The main explosive eruptions are represented by four plinian eruptions: Pomici di Base eruption (22 cal ky), Mercato (~8900 cal BP), Avellino (4365 cal BP) and Pompeii (79 AD). The 79 AD eruption embodies the most famous eruption since it's responsible of the destruction of Pompeii and Herculanum and it's the first described eruption. The Avellino eruption represents the last plinian event that preceded the Pompeii eruption. The eruptive sequence is similar to the 79 AD plinian eruption, with an opening phase preceding a main plinian fallout activity which ended by a phreatomagmatic phase. The fallout deposit displays a sharp colour contrast from white to grey pumice, corresponding to a magma composition evolution. We focus our study on the main fallout deposit that we sampled in detail in the Traianello quarry, 9 km North-North East of the crater, to investigate the degassing processes during the eruption, using volatile content and textural observations. Density and vesicularity measurements were obtained on a minimum of 100 pumice clasts sampled in 10 stratigraphic levels in the fallout deposit. On the basis of the density distribution, bulk geochemical data, point analytical measurements on glasses (melt inclusions and residual glass) and textural observations were obtained simultaneously on a minimum of 5 pumice clasts per eruptive unit. The glass composition, in particular the Na/K ratio, evolves from Na-rich phonolite for white pumices to a more K-rich phonolite for grey pumices. The pre-eruptive conditions are constrained by systematic Cl measurements in melt inclusions and matrix glass of pumice clasts. The entire magma was saturated relative to sub-critical fluids (a Cl-rich H2O vapour phase and a brine), with a Cl melt content buffered at ~6000 ppm, and a mean pre-eruptive H2O

Response of rock-fissure seepage to snowmelt in Mount Taihang slope-catchment, North China.

PubMed

Cao, Jiansheng; Liu, Changming; Zhang, Wanjun

2013-01-01

The complex physiographic and hydrogeological systems of mountain terrains facilitate intense rock-fissure seepages and multi-functional ecological interactions. As mountain eco-hydrological terrains are the common water sources of river basins across the globe, it is critical to build sufficient understanding into the hydrological processes in this unique ecosystem. This study analyzes infiltration and soil/rock-fissure seepage processes from a 65 mm snowfall/melt in November 2009 in the typical granitic gneiss slope catchment in the Taihang Mountains. The snowfall, snowmelt and melt-water processes are monitored using soil-water time-domain reflectometry (TDR) probes and tipping bucket flowmeters. The results suggest that snowmelt infiltration significantly influences soil/rock water seepage in the 0-100 cm soil depth of the slope-catchment. It is not only air temperature that influences snowmelt, but also snowmelt infiltration and rock-fissure seepage. Diurnal variations in rock-fissure seepage are in close correlation with air temperature (R(2) > 0.7). Temperature also varies with soil/rock water viscosity, which element in turn influences soil/rock water flow. Invariably, water dynamics in the study area is not only a critical water supply element for domestic, industrial and agricultural uses, but also for food security and social stability.

Randomized clinical trial of transcutaneous electrical posterior tibial nerve stimulation versus lateral internal sphincterotomy for treatment of chronic anal fissure.

PubMed

Youssef, Tamer; Youssef, Mohamed; Thabet, Waleed; Lotfy, Ahmed; Shaat, Reham; Abd-Elrazek, Eman; Farid, Mohamed

2015-10-01

The objective of this study was to evaluate the efficacy of transcutaneous electrical posterior tibial nerve stimulation in treatment of patients with chronic anal fissure and to compare it with the conventional lateral internal sphincterotomy. Consecutive patients with chronic anal fissure were randomly allocated into two treatment groups: transcutaneous electrical posterior tibial nerve stimulation group and lateral internal sphincterotomy group. The primary outcome measures were number of patients with clinical improvement and healed fissure. Secondary outcome measures were complications, VAS pain scores, Wexner's constipation and Peascatori anal incontinence scores, anorectal manometry, and quality of life index. Seventy-three patients were randomized into two groups of 36 patients who were subjected to transcutaneous electrical nerve stimulation and 37 patients who underwent lateral internal sphincterotomy. All (100%) patients in lateral internal sphincterotomy group had clinical improvement at one month following the procedure in contrast to 27 (75%) patients in transcutaneous electrical nerve stimulation group. Recurrence of anal fissure after one year was reported in one (2.7%) and 11 (40.7%) patients in lateral internal sphincterotomy and transcutaneous electrical nerve stimulation groups respectively. Resting anal pressure and functional anal canal length were significantly reduced after lateral internal sphincterotomy. Transcutaneous electrical posterior tibial nerve stimulation for treatment of chronic anal fissure is a novel, non-invasive procedure and has no complications. However, given the higher rate of clinical improvement and fissure healing and the lower rate of fissure recurrence, lateral internal sphincterotomy remains the gold standard for treating chronic anal fissure. Copyright © 2015 IJS Publishing Group Limited. Published by Elsevier Ltd. All rights reserved.

Pre-, Syn- and Post Eruptive Seismicity of the 2011 Eruption of Nabro Volcano, Eritrea

NASA Astrophysics Data System (ADS)

Goitom, Berhe; Hammond, James; Kendall, Michael; Nowacky, Andy; Keir, Derek; Oppenheimer, Clive; Ogubazghi, Ghebrebrhan; Ayele, Atalay; Ibrahim, Said; Jacques, Eric

2014-05-01

Nabro volcano, located in south-east Eritrea, East Africa, lies at the eastern margin of the Afar Rift and the Danakil Depression. Its tectonic behaviour is controlled by the divergence of the Arabian, Nubian and Somali plates. Nabro volcano was thought to be seismically quiet until it erupted in June 2011 with limited warning. The volcano erupted on June 12, 2011 around 20:32 UTC, following a series of earthquakes on that day that reached a maximum magnitude of 5.8. It is the first recorded eruption of Nabro volcano and only the second in Eritrea, following the Dubbi eruption in 1861. A lava flow emerged from the caldera and travelled about 20 km from the vent and buried settlements in the area. At the time of this eruption there was no seismic network in Eritrea, and hence the volcano was not monitored. In this study we use ten Ethiopian, one Yemeni and one Djibouti stations to investigate the seismicity of the area before, during and after the eruption. Four Eritrean seismic stations deployed in June 2011, four days after the eruption, are also included in the dataset. Travel time picks supplied by colleagues from Djibouti were also incorporated into the dataset. Our analysis covers roughly three months before and after the eruption and shows that Nabro was seismically quiet before the eruption (nine events), with the exception of one major earthquake (4.8 magnitude) that occurred on March 31, 2011. In contrast, the region shows continued seismic activity after the eruption (92 events). During the eruption seismicity levels are high (123 events), with two days particularly active, June 12 and June 17 with 85 and 28 discrete events, respectively. Maximum magnitudes of 5.8 and 5.9 were recorded on these two days. The two days of increased seismicity are consistent with satellite observations of the eruption which show two distinct phases of the eruption. The period between these two phases was dominated by volcanic tremor. The tremor signal lasted for almost one

Analyses of Etna Eruptive Activity From 18th Century and Characterization of Flank Eruptions

NASA Astrophysics Data System (ADS)

del Carlo, P.; Branca, S.; Coltelli, M.

2003-12-01

Etna explosive activity has usually been considered subordinate with respect to the effusive eruptions. Nevertheless, in the last decade and overall after the 2001 and 2002 flank eruptions, explosive activity has drawn the attention of the scientific and politic communities owing to the damages that the long-lasting ash fall caused to Sicily's economy. We analyzed the eruptions from the 18th century to find some analogous behavior of Etna in the past. A study of the Etna historical record (Branca and Del Carlo, 2003) evidenced that after the 1727 eruption, there are no more errors in the attribution of the year of the eruption. Furthermore from this time on, the scientific quality of the chronicles allowed us to obtain volcanological information and to estimate the magnitude of the major explosive events. The main goal of this work was to characterize the different typologies of Etna eruptions in the last three centuries. Meanwhile, we have tried to find the possible relationship between the two kinds of activity (explosive and effusive) in order to understand the complexity of the eruptive phenomena and define the short-term behavior of Etna. On the base of the predominance of the eruptive typology (effusive or explosive) we have classified the flank eruptions in three classes: i) Type 1: almost purely effusive; ii) Type 2: the intensity of explosive activity comparable with the effusive; iii) Type 3: almost purely explosive with minor lava effusion (only the 1763 La Montagnola and 2002 eruptions belong to this class). Long-lasting explosive activity is produced by flank eruptions with continuous ash emission and prolonged fallout on the flanks (e.g. 1763, 1811, 1852-53, 1886, 1892, 2001 and 2002 eruptions). At summit craters continuous activity is weaker, whereas the strongest explosive eruptions are short-lived events. Furthermore, from the 18th to 20th century there were several years of intense and discontinuous summit explosive activity, from high strombolian

Mechanism of Human Tooth Eruption: Review Article Including a New Theory for Future Studies on the Eruption Process

PubMed Central

Kjær, Inger

2014-01-01

Human eruption is a unique developmental process in the organism. The aetiology or the mechanism behind eruption has never been fully understood and the scientific literature in the field is extremely sparse. Human and animal tissues provide different possibilities for eruption analyses, briefly discussed in the introduction. Human studies, mainly clinical and radiological, have focused on normal eruption and gender differences. Why a tooth begins eruption and what enables it to move eruptively and later to end these eruptive movements is not known. Pathological eruption courses contribute to insight into the aetiology behind eruption. A new theory on the eruption mechanism is presented. Accordingly, the mechanism of eruption depends on the correlation between space in the eruption course, created by the crown follicle, eruption pressure triggered by innervation in the apical root membrane, and the ability of the periodontal ligament to adapt to eruptive movements. Animal studies and studies on normal and pathological eruption in humans can support and explain different aspects in the new theory. The eruption mechanism still needs elucidation and the paper recommends that future research on eruption keeps this new theory in mind. Understanding the aetiology of the eruption process is necessary for treating deviant eruption courses. PMID:24688798

Can earthquake fissures predispose hillslopes to landslides? - Evidence from Central and East Asia

NASA Astrophysics Data System (ADS)

Sidle, Roy C.; Gomi, Takashi; Rajapbaev, Muslim; Chyngozhoev, Nurstan

2017-04-01

Factors affecting earthquake-initiated landslides include earthquake magnitude, focal depth, and seismic wave propagation and attenuation. In contrast to rainfall-initiated landslides, earthquake-induced landslides often occur on convex slopes and near ridgelines. Here we present evidence from Fergana Basin, Kyrgyzstan and Kumamoto, Japan on how fissures developed during earthquakes may promote subsequent initiation of rainfall-triggered landslides. More than 1800 recent major landslides in hilly terrain and soft sediments of the Fergana Basin have been largely attributed to accumulation of heavy rainfall and snowmelt. While no large earthquakes have occurred in the Fergana Basin, smaller earthquakes have generated fissures near ridgelines and on convex slopes. The connection of fissures, developed years or decades before slope failure, with preferential transport of rainwater and runoff into the soil has not been previously investigated. Fissures have been observed to expand with time, particularly during subsequent minor earthquakes, further promoting preferential infiltration. Because the soil mantle does not have large contrasts in permeability that would define a slip plane for landslides, it appears that the position and depth of these fissures may control the location and depth of failures. Zones in the soil where surficial inputs of water are preferentially transported, augment natural subsurface accumulation of antecedent rainfall. Many landslides in the eastern Fergana Basin occur after several months of accumulated precipitation and groundwater has been observed emerging on critical hillside locations (near ridgelines and on convex slopes) prior to slope failure. During the 2016 Kumamoto Earthquake (M 7.3), many landslides were triggered in forest and grassland hillslopes near Mount Aso. All of these earthquakes were shallow (focal depths about 10 km), causing high shaking intensity and ground rupturing. Because soils were relatively dry during these

Prevalence of Dental Caries and Fissure Sealants in a Portuguese Sample of Adolescents

PubMed Central

Veiga, Nélio J.; Pereira, Carlos M.; Ferreira, Paula C.; Correia, Ilidio J.

2015-01-01

Introduction The aims of this study were to assess the prevalence of dental caries and the DMFT index, as well as the distribution pattern of pit and fissure sealants on permanent teeth in a Portuguese sample of adolescents, and to assess whether the existing usage of sealants and socio-demographic factors are correlated to caries prevalence on the examined sample. Materials and Methods A cross-sectional study was designed with a sample of 447 adolescents aged 12 to 18 years old, attending a public school in Sátão, Portugal. A self-administered questionnaire with questions about oral health behaviours and socio-economic status was answered by adolescents in the classroom. Clinical examination of oral health status and assessment of fissure sealants were accomplished by only one trained member of the research team. Results We obtained a DMFT index of 3.32 (2.92), which indicates a moderate level of prevalence of dental caries. When considering a DMFT = 0, we found significant statistical differences between the parents´ level of education (≤ 4th grade = 26.3 vs 5th–12th grade = 18.8 vs <12th grade = 43.3, p = 0.001), gender (male = 27.3 vs female = 19.6, p = 0.04), age (≤15 years = 27.1 vs <15 years = 18.5, p = 0.02), presence of fissure sealants (yes = 30.6 vs no = 13.5, p = 0.001) and experience of dental pain (no = 25.4 vs yes = 16.8, p = 0.02). When analyzing the prevalence of fissure sealants, we verified that 58.8% of adolescents had at least one fissure sealant applied. Significant statistical differences were found when analyzing the presence of fissure sealants related with parents´educational level (<9th grade, OR = 1.56 CI95% = 1.05–2.54), gender (female, OR = 1.86 CI95% = 1.19–2.98), experience of dental pain (yes, OR = 0.62 CI95% = 0.39–0.97) and presence of dental caries (yes, OR = 0.35 CI95% = 0.19–0.65). Conclusions The moderate level of caries prevalence reveals the need of improvement of primary prevention interventions among

Assessing future vent opening locations at the Somma-Vesuvio volcanic complex: 1. A new information geodatabase with uncertainty characterizations

NASA Astrophysics Data System (ADS)

Tadini, A.; Bisson, M.; Neri, A.; Cioni, R.; Bevilacqua, A.; Aspinall, W. P.

2017-06-01

This study presents new and revised data sets about the spatial distribution of past volcanic vents, eruptive fissures, and regional/local structures of the Somma-Vesuvio volcanic system (Italy). The innovative features of the study are the identification and quantification of important sources of uncertainty affecting interpretations of the data sets. In this regard, the spatial uncertainty of each feature is modeled by an uncertainty area, i.e., a geometric element typically represented by a polygon drawn around points or lines. The new data sets have been assembled as an updatable geodatabase that integrates and complements existing databases for Somma-Vesuvio. The data are organized into 4 data sets and stored as 11 feature classes (points and lines for feature locations and polygons for the associated uncertainty areas), totaling more than 1700 elements. More specifically, volcanic vent and eruptive fissure elements are subdivided into feature classes according to their associated eruptive styles: (i) Plinian and sub-Plinian eruptions (i.e., large- or medium-scale explosive activity); (ii) violent Strombolian and continuous ash emission eruptions (i.e., small-scale explosive activity); and (iii) effusive eruptions (including eruptions from both parasitic vents and eruptive fissures). Regional and local structures (i.e., deep faults) are represented as linear feature classes. To support interpretation of the eruption data, additional data sets are provided for Somma-Vesuvio geological units and caldera morphological features. In the companion paper, the data presented here, and the associated uncertainties, are used to develop a first vent opening probability map for the Somma-Vesuvio caldera, with specific attention focused on large or medium explosive events.

The prevalence of dental caries and fissure sealants in 12 year old children by disadvantaged status in Dublin (Ireland).

PubMed

Sagheri, D; McLoughlin, J; Clarkson, J J

2009-03-01

The aim was to record dental caries levels and the presence of fissure sealants in 12-year-old schoolchildren whose domestic water supply had been fluoridated since birth in Dublin (Ireland). Cross-sectional study. Participants A representative, random sample of 12-year-old schoolchildren in north-west Dublin. Dental caries levels were recorded using WHO criteria and fissure sealant was recorded when sealant was detectable on a permanent molar tooth. Medical card ownership, as a surrogate for disadvantage, was recorded by use of a questionnaire. Three-hundred and thirty-two (332) children were examined. The mean DMFT was 0.80 (SD 1.24). Analysis (Mann-Whitney U test) based on stratification of the sample according to medical-card status revealed no statistically significant difference between DMFT median scores of children of medical-card holders (i.e., social disadvantage background) and non medical-card holders (p-value = 0.23). However, the data revealed a social gradient in the presence of at least one fissure sealant. Approximately 10% more children in the group of medical-card holders had no fissure sealants present. Fisher's exact test was used to examine the association between the absence of fissure sealants and at least one fissure sealant between the two groups and was considered to be statistically significant (p-value = 0.04). This study demonstrated a social gradient in the presence of fissure sealants, but no such gradient in dental caries levels. This demonstrates the importance of population-based measures in the prevention of dental caries, such as water fluoridation, in reducing oral health inequalities.

Tooth Eruption without Roots

PubMed Central

2013-01-01

Root development and tooth eruption are very important topics in dentistry. However, they remain among the less-studied and -understood subjects. Root development accompanies rapid tooth eruption, but roots are required for the movement of teeth into the oral cavity. It has been shown that the dental follicle and bone remodeling are essential for tooth eruption. So far, only limited genes have been associated with root formation and tooth eruption. This may be due to the difficulties in studying late stages of tooth development and tooth movement and the lack of good model systems. Transgenic mice with eruption problems and short or no roots can be used as a powerful model for further deciphering of the cellular, molecular, and genetic mechanisms underlying root formation and tooth eruption. Better understanding of these processes can provide hints on delivering more efficient dental therapies in the future. PMID:23345536

Volcanic Eruptions and Climate

NASA Astrophysics Data System (ADS)

Robock, A.

2012-12-01

Large volcanic eruptions inject sulfur gases into the stratosphere, which convert to sulfate aerosols with an e-folding residence time of about one year. The radiative and chemical effects of these aerosol clouds produce responses in the climate system. Observations and numerical models of the climate system show that volcanic eruptions produce global cooling and were the dominant natural cause of climate change for the past millennium, on timescales from annual to century. Major tropical eruptions produce winter warming of Northern Hemisphere continents for one or two years, while high latitude eruptions in the Northern Hemisphere weaken the Asian and African summer monsoon. The Toba supereruption 74,000 years ago caused very large climate changes, affecting human evolution. However, the effects did not last long enough to produce widespread glaciation. An episode of four large decadally-spaced eruptions at the end of the 13th century C.E. started the Little Ice Age. Since the Mt. Pinatubo eruption in the Philippines in 1991, there have been no large eruptions that affected climate, but the cumulative effects of small eruptions over the past decade had a small effect on global temperature trends. The June 13, 2011 Nabro eruption in Eritrea produced the largest stratospheric aerosol cloud since Pinatubo, and the most of the sulfur entered the stratosphere not by direct injection, but by slow lofting in the Asian summer monsoon circulation. Volcanic eruptions warn us that while stratospheric geoengineering could cool the surface, reducing ice melt and sea level rise, producing pretty sunsets, and increasing the CO2 sink, it could also reduce summer monsoon precipitation, destroy ozone, allowing more harmful UV at the surface, produce rapid warming when stopped, make the sky white, reduce solar power, perturb the ecology with more diffuse radiation, damage airplanes flying in the stratosphere, degrade astronomical observations, affect remote sensing, and affect

Eruption and degassing dynamics of the major August 2015 Piton de la Fournaise eruption

NASA Astrophysics Data System (ADS)

Di Muro, Andrea; Arellano, Santiago; Aiuppa, Alessandro; Bachelery, Patrick; Boudoire, Guillaume; Coppola, Diego; Ferrazzini, Valerie; Galle, Bo; Giudice, Gaetano; Gurioli, Lucia; Harris, Andy; Liuzzo, Marco; Metrich, Nicole; Moune, Severine; Peltier, Aline; Villeneuve, Nicolas; Vlastelic, Ivan

2016-04-01

Piton de la Fournaise (PdF) shield volcano is one of the most active basaltic volcanoes in the World with one eruption every nine months, on average. This frequent volcanic activity is broadly bimodal, with frequent small volume, short lived eruptions (< 30 Mm3, most being < 10 Mm3) and less frequent relatively large (50-210 Mm3) and long lasting (months) eruptions. After the major caldera forming event of 2007, the volcano produced several short lived small volume summit to proximal eruptions of relatively evolved cotectic magmas and relatively long repose periods (up to 3.5 years between 2010 and 2014). The August 2015 eruption was the first large (45±15 Mm3) and long lasting (2 months) eruption since 2007 and the only event to be fully monitored by the new gas geochemical network of Piton de la Fournaise volcanological observatory (DOAS, MultiGaS, diffuse CO2 soil emissions). Regular lava and tephra sampling was also performed for geochemical and petrological analysis. The eruption was preceded by a significant increase in CO2 soil emissions at distal soil stations (ca. 15 km from the summit), with CO2 enrichment also being recorded at summit low temperature fumaroles. Eruptive products were spectacularly zoned, with plagioclase and pyroxene being abundant in the early erupted products and olivine being the main phase in the late-erupted lavas. Total gas emissions at the eruptive vent underwent a decrease during the first half of the eruption and then an increase, mirroring the time evolution of magma discharge rate (from 5-10 m3/s in September to 15-30 m3/s in late-October) and the progressive change in magma composition. In spite of significant evolution in magma and gas output, CO2/SO2 ratios in high temperature gases remained quite low (< 0.3) and with little temporal change. Geochemical data indicated that this relatively long-lived eruption corresponded to the progressive drainage of most of the shallow part of PdF plumbing system, triggered by a new

Natural Treatments for Fissure in Ano Used by Traditional Persian Scholars, Razi (Rhazes) and Ibn Sina (Avicenna)

PubMed Central

Derakhshan, Ali Reza

2016-01-01

Most cases of chronic fissure do not respond to medical treatment. Razi and Ibn Sina were 2 of the best-known scientists of ancient Persia. The purpose of this study was to find out new scientific evidence in modern medicine about their recommendations, in order to find certain clues to conduct useful researches in the future. First, treatments of anal fissure mentioned by Razi and Ibn Sina were reviewed. Then, literature search was made in electronic databases including PubMed, Scopus, and Google Scholar. Management of anal fissure according to Razi’s and Ibn Sina’s practices is done based on 3 interventions: lifestyle modifications, drug treatments, and manual procedures. Almost all remedies suggested by Razi and Ibn Sina have shown their effects on fissure in ano via several mechanisms of action in many in vitro and in vivo studies; Still there is lack of human studies on the subject. PMID:27279645

Natural Treatments for Fissure in Ano Used by Traditional Persian Scholars, Razi (Rhazes) and Ibn Sina (Avicenna).

PubMed

Derakhshan, Ali Reza

2016-06-08

Most cases of chronic fissure do not respond to medical treatment. Razi and Ibn Sina were 2 of the best-known scientists of ancient Persia. The purpose of this study was to find out new scientific evidence in modern medicine about their recommendations, in order to find certain clues to conduct useful researches in the future. First, treatments of anal fissure mentioned by Razi and Ibn Sina were reviewed. Then, literature search was made in electronic databases including PubMed, Scopus, and Google Scholar. Management of anal fissure according to Razi's and Ibn Sina's practices is done based on 3 interventions: lifestyle modifications, drug treatments, and manual procedures. Almost all remedies suggested by Razi and Ibn Sina have shown their effects on fissure in ano via several mechanisms of action in many in vitro and in vivo studies; Still there is lack of human studies on the subject. © The Author(s) 2016.

Ultrafast syn-eruptive degassing and ascent trigger high-energy basic eruptions.

PubMed

Giuffrida, Marisa; Viccaro, Marco; Ottolini, Luisa

2018-01-09

Lithium gradients in plagioclase are capable of recording extremely short-lived processes associated with gas loss from magmas prior to extrusion at the surface. We present SIMS profiles of the 7 Li/ 30 Si ion ratio in plagioclase crystals from products of the paroxysmal sequence that occurred in the period 2011-2013 at Mt. Etna (Italy) in an attempt to constrain the final ascent and degassing processes leading to these powerful eruptions involving basic magma. The observed Li concentrations reflect cycles of Li addition to the melt through gas flushing, and a syn-eruptive stage of magma degassing driven by decompression that finally produce significant Li depletion from the melt. Modeling the decreases in Li concentration in plagioclase by diffusion allowed determination of magma ascent timescales that are on the order of minutes or less. Knowledge of the storage depth beneath the volcano has led to the quantification of a mean magma ascent velocity of ~43 m/s for paroxysmal eruptions at Etna. The importance of these results relies on the application of methods, recently used exclusively for closed-system volcanoes producing violent eruptions, to open-conduit systems that have generally quiet eruptive periods of activity sometimes interrupted by sudden re-awakening and the production of anomalously energetic eruptions.

Thermal signature, eruption style, and eruption evolution at Pele and Pillan on Io

USGS Publications Warehouse

Davies, A.G.; Keszthelyi, L.P.; Williams, D.A.; Phillips, C.B.; McEwen, A.S.; Lopes, R.M.C.; Smythe, W.D.; Kamp, L.W.; Soderblom, L.A.; Carlson, R.W.

2001-01-01

The Galileo spacecraft has been periodically monitoring volcanic activity on Io since June 1996, making it possible to chart the evolution of individual eruptions. We present results of coanalysis of Near-Infrared Mapping Spectrometer (NIMS) and solid-state imaging (SSI) data of eruptions at Pele and Pillan, especially from a particularly illuminating data set consisting of mutually constraining, near-simultaneous NIMS and SSI observations obtained during orbit C9 in June 1997. The observed thermal signature from each hot spot, and the way in which the thermal signature changes with time, tightly constrains the possible styles of eruption. Pele and Pillan have very different eruption styles. From September 1996 through May 1999, Pele demonstrates an almost constant total thermal output, with thermal emission spectra indicative of a long-lived, active lava lake. The NIMS Pillan data exhibit the thermal signature of a "Pillanian" eruption style, a large, vigorous eruption with associated open channel, or sheet flows, producing an extensive flow field by orbit C10 in September 1997. The high mass eruption rate, high liquidus temperature (at least 1870 K) eruption at Pillan is the best candidate so far for an active ultramafic (magnesium-rich, "komatiitic") flow on Io, a style of eruption never before witnessed. The thermal output per unit area from Pillan is, however, consistent with the emplacement of large, open-channel flows. Magma temperature at Pele is ~1600 K. If the magma temperature is 1600 K, it suggests a komatiitic-basalt composition. The power output from Pele is indicative of a magma volumetric eruption rate of ~250 to 340 m3 s-1. Although the Pele lava lake is considerably larger than its terrestrial counterparts, the power and mass fluxes per unit area are similar to active terrestrial lava lakes. Copyright 2001 by the American Geophysical Union.

The physics of large eruptions

NASA Astrophysics Data System (ADS)

Gudmundsson, Agust

2015-04-01

Based on eruptive volumes, eruptions can be classified as follows: small if the volumes are from less than 0.001 km3 to 0.1 km3, moderate if the volumes are from 0.1 to 10 km3, and large if the volumes are from 10 km3 to 1000 km3 or larger. The largest known explosive and effusive eruptions have eruptive volumes of 4000-5000 km3. The physics of small to moderate eruptions is reasonably well understood. For a typical mafic magma chamber in a crust that behaves as elastic, about 0.1% of the magma leaves the chamber (erupted and injected as a dyke) during rupture and eruption. Similarly, for a typical felsic magma chamber, the eruptive/injected volume during rupture and eruption is about 4%. To provide small to moderate eruptions, chamber volumes of the order of several tens to several hundred cubic kilometres would be needed. Shallow crustal chambers of these sizes are common, and deep-crustal and upper-mantle reservoirs of thousands of cubic kilometres exist. Thus, elastic and poro-elastic chambers of typical volumes can account for small to moderate eruptive volumes. When the eruptions become large, with volumes of tens or hundreds of cubic kilometres or more, an ordinary poro-elastic mechanism can no longer explain the eruptive volumes. The required sizes of the magma chambers and reservoirs to explain such volumes are simply too large to be plausible. Here I propose that the mechanics of large eruptions is fundamentally different from that of small to moderate eruptions. More specifically, I suggest that all large eruptions derive their magmas from chambers and reservoirs whose total cavity-volumes are mechanically reduced very much during the eruption. There are two mechanisms by which chamber/reservoir cavity-volumes can be reduced rapidly so as to squeeze out much of, or all, their magmas. One is piston-like caldera collapse. The other is graben subsidence. During large slip on the ring-faults/graben-faults the associated chamber/reservoir shrinks in volume

A Study of a Compound Solar Eruption with Two Consecutive Erupting Magnetic Structures

NASA Astrophysics Data System (ADS)

Dhakal, Suman K.; Chintzoglou, Georgios; Zhang, Jie

2018-06-01

We report a study of a compound solar eruption that was associated with two consecutively erupting magnetic structures and correspondingly two distinct peaks, during impulsive phase, of an M-class flare (M8.5). Simultaneous multi-viewpoint observations from SDO, GOES and STEREO-A show that this compound eruption originated from two pre-existing sigmoidal magnetic structures lying along the same polarity inversion line. Observations of the associated pre-existing filaments further show that these magnetic structures are lying one on top of the other, separated by 12 Mm in height, in a so-called “double-decker” configuration. The high-lying magnetic structure became unstable and erupted first, appearing as an expanding hot channel seen at extreme ultraviolet wavelengths. About 12 minutes later, the low-lying structure also started to erupt and moved at an even faster speed compared to the high-lying one. As a result, the two erupting structures interacted and merged with each other, appearing as a single coronal mass ejection in the outer corona. We find that the double-decker configuration is likely caused by the persistent shearing motion and flux cancellation along the source active region’s strong-gradient polarity inversion line. The successive destabilization of these two separate but closely spaced magnetic structures, possibly in the form of magnetic flux ropes, led to a compound solar eruption. The study of the compound eruption provides a unique opportunity to reveal the formation process, initiation, and evolution of complex eruptive structures in solar active regions.

Very-low-frequency resistivity, self-potential and ground temperature surveys on Taal volcano (Philippines): Implications for future activity

NASA Astrophysics Data System (ADS)

Zlotnicki, J.; Vargemezis, G.; Johnston, M. J. S.; Sasai, Y.; Reniva, P.; Alanis, P.

2017-06-01

Taal volcano is one of the most dangerous volcanoes in the Philippines. Thirty-three eruptions have occurred through historical time with several exhibiting cataclysmic phases. Most recent eruptions are confined to Volcano Island located within the prehistoric Taal collapse caldera that is now filled by Taal Lake. The last eruptive activity from 1965 to 1977 took place from Mt. Tabaro, about 2 km to the southwest of the Main Crater center. Since this time, episodes of seismic activity, ground deformation, gas release, surface fissuring, fumarole activity and temperature changes are recorded periodically around the main crater, but no major eruption has occurred. This period of quiescence is the third longest period without eruptive activity since 1572. In March 2010, a campaign based on Very-Low-Frequency (VLF) resistivity surveys together with repeated surveys of self-potential, ground temperature and fissure activity was intensified and the results compared to a large-scale Electrical Resistivity Tomography experiment. This work fortunately occurred before, within and after a new seismovolcanic crisis from late April 2010 to March 2011. The joint analysis of these new data, together with results from previous magnetotelluric soundings, allows a better description of the electrical resistivity and crustal structure beneath the Main Crater down to a depth of several kilometers. No indication of growth of the two geothermal areas located on both sides of the northern crater rim was apparent from 2005 to March 2010. These areas appear controlled by active fissures, opened during the 1992 and 1994 crises, that dip downward towards the core of the hydrothermal system located at about 2.5 km depth beneath the crater. Older mineralized fissures at lower elevations to the North of the geothermal areas also dip downward under the crater. Repeated self-potential and ground temperature surveys completed between 2005 and 2015 show new geothermal and hydrothermal activity in

Multiple coincident eruptive seismic tremor sources during the 2014-2015 eruption at Holuhraun, Iceland

NASA Astrophysics Data System (ADS)

Eibl, Eva P. S.; Bean, Christopher J.; Jónsdóttir, Ingibjörg; Höskuldsson, Armann; Thordarson, Thorvaldur; Coppola, Diego; Witt, Tanja; Walter, Thomas R.

2017-04-01

We analyze eruptive tremor during one of the largest effusive eruptions in historical times in Iceland (2014/2015 Holuhraun eruption). Seismic array recordings are compared with effusion rates deduced from Moderate Resolution Imaging Spectroradiometer recordings and ground video monitoring data and lead to the identification of three coexisting eruptive tremor sources. This contrasts other tremor studies that generally link eruptive tremor to only one source usually associated with the vent. The three sources are (i) a source that is stable in back azimuth and shows bursts with ramp-like decrease in amplitude at the beginning of the eruption: we link it to a process below the open vents where the bursts correlate with the opening of new vents and temporary increases in the lava fountaining height; (ii) a source moving by a few degrees per month while the tremor amplitude suddenly increases and decreases: back azimuth and slowness correlate with the growing margins of the lava flow field, whilst new contact with a river led to fast increases of the tremor amplitude; and (iii) a source moving by up to 25° southward in 4 days that cannot be related to any observed surface activity and might be linked to intrusions. We therefore suggest that eruptive tremor amplitudes/energies are used with caution when estimating eruptive volumes, effusion rates, or the eruption explosivity as multiple sources can coexist during the eruption phase. Our results suggest that arrays can monitor both the growth of a lava flow field and the activity in the vents.

Eruptive history of the Dieng Mountains region, central Java, and potential hazards from future eruptions

USGS Publications Warehouse

Miller, C. Dan; Sushyar, R.; ,; Hamidi, S.

1983-01-01

The Dieng Mountains region consists of a complex of late Quaternary to recent volcanic stratocones, parasitic vents, and explosion craters. Six age groups of volcanic centers, eruptive products, and explosion craters are recognized in the region based on their morphology, degree of dissection, stratigraphic relationships, and degree of weathering. These features range in age from tens of thousands of years to events that have occurred this century. No magmatic eruptions have occurred in the Dieng Mountains region for at least several thousand years; volcanic activity during this time interval has consisted of phreatic eruptions and non-explosive hydrothermal activity. If future volcanic events are similar to those of the last few thousand years, they will consist of phreatic eruptions, associated small hot mudflows, emission of suffocating gases, and hydrothermal activity. Future phreatic eruptions may follow, or accompany, periods of increased earthquake activity; the epicenters for the seismicity may suggest where eruptive activity will occur. Under such circumstances, the populace within several kilometers of a potential eruption site should be warned of a possible eruption, given instructions about what to do in the event of an eruption, or temporarily evacuated to a safer location.

Femtosecond Laser in situ Keratomileusis Flap Creation in Narrow Palpebral Fissure Eyes without Suction.

PubMed

Chang, John S M; Law, Antony K P; Ng, Jack C M; Cheng, May S Y

2017-01-01

To evaluate a surgical technique used in eyes with narrow palpebral fissure undergoing femtosecond laser flap creation without suction during laser in situ keratomileusis (LASIK). All data of 2 patient groups were collected through chart review. Group 1 consisted of 6 eyes with narrow palpebral fissure in which the suction ring was manually fixated and femtosecond laser was applied accordingly. Thirty comparison cases were randomly drawn from among eyes that underwent a standard LASIK procedure matched for age and preoperative refraction (group 2). Only 1 eye of each patient was selected to compare the refractive and visual outcomes between groups. In all group 1 eyes, the flaps were created successfully with manual fixation of the suction ring without suction. No eyes lost 2 or more lines of vision. No significant difference was found in the safety and refractive outcomes between groups. Manual fixation of the suction ring in eyes with narrow palpebral fissure without suction was feasible for flap creation during LASIK.

An Analysis of Eruptions Detected by the LMSAL Eruption Patrol

NASA Astrophysics Data System (ADS)

Hurlburt, N. E.; Higgins, P. A.; Jaffey, S.

2014-12-01

Observations of the solar atmosphere reveals a wide range of real and apparent motions, from small scale jets and spicules to global-scale coronal mass ejections. Identifying and characterizing these motions are essential to advance our understanding the drivers of space weather. Automated and visual identifications are used in identifying CMEs. To date, the precursors to these — eruptions near the solar surface — have been identified primarily by visual inspection. Here we report on an analysis of the eruptions detected by the Eruption Patrol, a data mining module designed to automatically identify eruptions from data collected by Solar Dynamics Observatory's Atmospheric Imaging Assembly (SDO/AIA). We describe the module and use it both to explore relations with other solar events recorded in the Heliophysics Event Knowledgebase and to identify and access data collected by the Interface Region Imaging Spectrograph (IRIS) and Solar Optical Telescope (SOT) on Hinode for further analysis.

Modelling fluid flow in clastic eruptions: application to the Lusi mud eruption.

NASA Astrophysics Data System (ADS)

Collignon, Marine; Schmid, Daniel W.; Galerne, Christophe; Lupi, Matteo; Mazzini, Adriano

2017-04-01

Clastic eruptions involve the rapid ascension of clasts together with fluids, gas and/or liquid phases that may deform and brecciate the host rocks. These fluids transport the resulting mixture, called mud breccia, to the surface. Such eruptions are often associated with geological structures such as mud volcanoes, hydrothermal vent complexes and more generally piercement structures. They involve various processes, acting over a wide range of scales which makes them a complex and challenging, multi-phase system to model. Although piercement structures have been widely studied and discussed, only few attempts have been made to model the dynamics of such clastic eruptions. The ongoing Lusi mud eruption, in the East Java back-arc basin, which began in May 2006, is probably the most spectacular clastic eruption. Lusi's eruptive behaviour has been extensively studied over the past decade and thus represents a unique opportunity to better understand the dynamics driving clastic eruptions, including fossil clastic systems. We use both analytical formulations and numerical models to simulate Lusi's eruptive dynamics and to investigate simple relationships between the mud breccia properties (density, viscosity, gas and clast content) and the volumetric flow rate. Our results show that the conduit radius of such piercement system cannot exceeds a few meters at depth, and that clasts, if not densely packed, will not affect the flow rate when they are smaller than a fifth of the conduit size. Using published data for the annual gas fluxes at Lusi, we infer a maximal depth at which exsolution starts. This occurs between 1800 m and 3200 m deep for the methane and between 750 m and 1000 m for the carbon dioxide.

SYMPATHETIC SOLAR FILAMENT ERUPTIONS

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wang, Rui; Liu, Ying D.; Zimovets, Ivan

2016-08-10

The 2015 March 15 coronal mass ejection as one of the two that together drove the largest geomagnetic storm of solar cycle 24 so far was associated with sympathetic filament eruptions. We investigate the relations between the different filaments involved in the eruption. A surge-like small-scale filament motion is confirmed as the trigger that initiated the erupting filament with multi-wavelength observations and using a forced magnetic field extrapolation method. When the erupting filament moved to an open magnetic field region, it experienced an obvious acceleration process and was accompanied by a C-class flare and the rise of another larger filamentmore » that eventually failed to erupt. We measure the decay index of the background magnetic field, which presents a critical height of 118 Mm. Combining with a potential field source surface extrapolation method, we analyze the distributions of the large-scale magnetic field, which indicates that the open magnetic field region may provide a favorable condition for F2 rapid acceleration and have some relation with the largest solar storm. The comparison between the successful and failed filament eruptions suggests that the confining magnetic field plays an important role in the preconditions for an eruption.« less

Spatially resolved SO2 flux emissions from Mt Etna.

PubMed

D'Aleo, R; Bitetto, M; Delle Donne, D; Tamburello, G; Battaglia, A; Coltelli, M; Patanè, D; Prestifilippo, M; Sciotto, M; Aiuppa, A

2016-07-28

We report on a systematic record of SO 2 flux emissions from individual vents of Etna volcano (Sicily), which we obtained using a permanent UV camera network. Observations were carried out in summer 2014, a period encompassing two eruptive episodes of the New South East Crater (NSEC) and a fissure-fed eruption in the upper Valle del Bove. We demonstrate that our vent-resolved SO 2 flux time series allow capturing shifts in activity from one vent to another and contribute to our understanding of Etna's shallow plumbing system structure. We find that the fissure eruption contributed ~50,000 t of SO 2 or ~30% of the SO 2 emitted by the volcano during the 5 July to 10 August eruptive interval. Activity from this eruptive vent gradually vanished on 10 August, marking a switch of degassing toward the NSEC. Onset of degassing at the NSEC was a precursory to explosive paroxysmal activity on 11-15 August.

Early prediction of eruption site using lightning location data: Estimates of accuracy during past eruptions

NASA Astrophysics Data System (ADS)

Nína Petersen, Guðrún; Arason, Þórður; Bjornsson, Halldór

2013-04-01

Eruption of subglacial volcanoes may lead to catastrophic floods and therefore early determination of the exact eruption site may be critical to civil protection evacuation plans. Poor visibility due to weather or darkness often inhibit positive identification of exact eruption location for many hours. However, because of the proximity and abundance of water in powerful subglacial volcanic eruptions, they are probably always accompanied by early lightning activity in the volcanic column. Lightning location systems, designed for weather thunderstorm monitoring, based on remote detection of electromagnetic waves from lightning, can provide valuable real-time information on location of eruption site. Important aspect of such remote detection is its independence of weather, apart from thunderstorms close to the volcano. Individual lightning strikes can be 5-10 km in length and are sometimes tilted and to the side of the volcanic column. This adds to the lightning location uncertainty, which is often a few km. Furthermore, the volcanic column may be swayed by the local wind to one side. Therefore, location of a single lightning can be misleading but by calculating average location of many lightning strikes and applying wind correction a more accurate eruption site location can be obtained. In an effort to assess the expected accuracy, the average lightning locations during the past five volcanic eruptions in Iceland (1998-2011) were compared to the exact site of the eruption vent. Simultaneous weather thunderstorms might have complicated this analysis, but there were no signs of ordinary thunderstorms in Iceland during these eruptions. To identify a suitable wind correction, the vector wind at the 500 hPa pressure level (5-6 km altitude) was compared to mean lightning locations during the eruptions. The essential elements of a system, which predicts the eruption site during the first hour(s) of an eruption, will be described.

Deformation at longyao ground fissure and its surroundings, north China plain, revealed by ALOS PALSAR PS-InSAR

NASA Astrophysics Data System (ADS)

Yang, Chengsheng; Lu, Zhong; Zhang, Qin; Zhao, Chaoying; Peng, Jianbing; Ji, Lingyun

2018-05-01

The Longyao ground fissure (LGF) is the longest and most active among more than 1000 ground fissures on the North China Plain. There have been many studies on the formation mechanism of the LGF, due to its scientific importance and its potential for damage to the environment. These studies have been based on both regional tectonic analysis and numerical simulations. In order to provide a better understanding of the formation mechanism, the deformation of the crack and its surrounding environment should be taken into consideration. In this paper, PS-InSAR technology was employed to assess the ground deformation of LGF and its surrounding area, using L-band ALOS-1 PALSAR images from 2007 to 2011. The characteristics of ground deformation, relationships between fissure activity and surrounding faults and groundwater exploitation were analyzed. This study shows that the north side of Longyao fault (LF) is uplifting while the south side is subsiding. This provides the tectonic conditions responsible for the activity of the ground fissure. Local groundwater exploitation also plays an important role in the development of ground fissures. InSAR observations were modeled to infer the loading depth (-2.8 km) and the slip rate (31.1 mm/yr) of LF.

Dental Pit and Fissure Sealants: Implications for School Health Personnel.

ERIC Educational Resources Information Center

McCormack-Brown, K. R.; And Others

1989-01-01

To promote good personal hygiene practices in students, school health personnel must be informed about dental pit and fissure sealants and related programs. Adoption and maintenance of such programs may depend on the success of school health personnel in educating administrators and policymakers. (SM)

Two-step solar filament eruptions

NASA Astrophysics Data System (ADS)

Filippov, B.

2018-04-01

Coronal mass ejections (CMEs) are closely related to eruptive filaments and usually are the continuation of the same eruptive process into the upper corona. There are failed filament eruptions when a filament decelerates and stops at some greater height in the corona. Sometimes the filament after several hours starts to rise again and develops into the successful eruption with a CME formation. We propose a simple model for the interpretation of such two-step eruptions in terms of equilibrium of a flux rope in a two-scale ambient magnetic field. The eruption is caused by a slow decrease of the holding magnetic field. The presence of two critical heights for the initiation of the flux-rope vertical instability allows the flux rope to stay after the first jump some time in a metastable equilibrium near the second critical height. If the decrease of the ambient field continues, the next eruption step follows.

Three-Dimensional Numerical Simulation on Triaxial Failure Mechanical Behavior of Rock-Like Specimen Containing Two Unparallel Fissures

NASA Astrophysics Data System (ADS)

Huang, Yan-Hua; Yang, Sheng-Qi; Zhao, Jian

2016-12-01

A three-dimensional particle flow code (PFC3D) was used for a systematic numerical simulation of the strength failure and cracking behavior of rock-like material specimens containing two unparallel fissures under conventional triaxial compression. The micro-parameters of the parallel bond model were first calibrated using the laboratory results of intact specimens and then validated from the experimental results of pre-fissured specimens under triaxial compression. Numerically simulated stress-strain curves, strength and deformation parameters and macro-failure modes of pre-fissured specimens were all in good agreement with the experimental results. The relationship between stress and the micro-crack numbers was summarized. Crack initiation, propagation and coalescence process of pre-fissured specimens were analyzed in detail. Finally, horizontal and vertical cross sections of numerical specimens were derived from PFC3D. A detailed analysis to reveal the internal damage behavior of rock under triaxial compression was carried out. The experimental and simulated results are expected to improve the understanding of the strength failure and cracking behavior of fractured rock under triaxial compression.

Chronology of Postglacial Eruptive Activity and Calculation of Eruption Probabilities for Medicine Lake Volcano, Northern California

USGS Publications Warehouse

Nathenson, Manuel; Donnelly-Nolan, Julie M.; Champion, Duane E.; Lowenstern, Jacob B.

2007-01-01

Medicine Lake volcano has had 4 eruptive episodes in its postglacial history (since 13,000 years ago) comprising 16 eruptions. Time intervals between events within the episodes are relatively short, whereas time intervals between the episodes are much longer. An updated radiocarbon chronology for these eruptions is presented that uses paleomagnetic data to constrain the choice of calibrated ages. This chronology is used with exponential, Weibull, and mixed-exponential probability distributions to model the data for time intervals between eruptions. The mixed exponential distribution is the best match to the data and provides estimates for the conditional probability of a future eruption given the time since the last eruption. The probability of an eruption at Medicine Lake volcano in the next year from today is 0.00028.

Medical and surgical treatment of haemorrhoids and anal fissure in Crohn’s disease: a critical appraisal

PubMed Central

2013-01-01

Background The principle to avoid surgery for haemorrhoids and/or anal fissure in Crohn’s disease (CD) patients is still currently valid despite advances in medical and surgical treatments. In this study we report our prospectively recorded data on medical and surgical treatment of haemorrhoids and anal fissures in CD patients over a period of 8 years. Methods Clinical data of patients affected by perianal disease were routinely and prospectively inserted in a database between October 2003 and October 2011 at the Department of Surgery, Tor Vergata University Hospital, Rome. We reviewed and divided in two groups records on CD patients treated either medically or surgically according to the diagnosis of haemorrhoids or anal fissures. Moreover, we compared in each group the outcome in patients with prior diagnosis of CD and in patients diagnosed with CD only after perianal main treatment. Results Eighty-six CD patients were included in the study; 45 were treated for haemorrhoids and 41 presented with anal fissure. Conservative approach was initially adopted for all patients; in case of medical treatment failure, the presence of stable intestinal disease made them eligible for surgery. Fifteen patients underwent haemorrhoidectomy (open 11; closed 3; stapled 1), and two rubber band ligation. Fourteen patients required surgery for anal fissure (Botox ± fissurectomy 8; LIS 6). In both groups we observed high complication rate, 41.2% for haemorrhoids and 57.1% for anal fissure. Patients who underwent haemorrhoidectomy without certain diagnosis of CD had significantly higher risk of complications. Conclusions Conservative treatment of proctologic diseases in CD patients has been advocated given the high risk of complications and the evidence that spontaneous healing may also occur. From these preliminary results a role of surgery is conceivable in high selected patients, but definitve conclusions can’t be made. Further randomized trials are needed to establish the

A comparison study of a solar active-region eruptive filament and a neighboring non-eruptive filament

NASA Astrophysics Data System (ADS)

Jiang, Chao-Wei; Wu, Shi-Tsan; Feng, Xue-Shang; Hu, Qiang

2016-01-01

Solar active region (AR) 11283 is a very magnetically complex region and it has produced many eruptions. However, there exists a non-eruptive filament in the plage region just next to an eruptive one in the AR, which gives us an opportunity to perform a comparison analysis of these two filaments. The coronal magnetic field extrapolated using our CESE-MHD-NLFFF code reveals that two magnetic flux ropes (MFRs) exist in the same extrapolation box supporting these two filaments, respectively. Analysis of the magnetic field shows that the eruptive MFR contains a bald-patch separatrix surface (BPSS) cospatial very well with a pre-eruptive EUV sigmoid, which is consistent with the BPSS model for coronal sigmoids. The magnetic dips of the non-eruptive MFRs match Hα observation of the non-eruptive filament strikingly well, which strongly supports the MFR-dip model for filaments. Compared with the non-eruptive MFR/filament (with a length of about 200 Mm), the eruptive MFR/filament is much smaller (with a length of about 20 Mm), but it contains most of the magnetic free energy in the extrapolation box and holds a much higher free energy density than the non-eruptive one. Both the MFRs are weakly twisted and cannot trigger kink instability. The AR eruptive MFR is unstable because its axis reaches above a critical height for torus instability, at which the overlying closed arcades can no longer confine the MFR stably. On the contrary, the quiescent MFR is very firmly held by its overlying field, as its axis apex is far below the torus-instability threshold height. Overall, this comparison investigation supports that an MFR can exist prior to eruption and the ideal MHD instability can trigger an MFR eruption.

Dental eruption sequence among colobine primates.

PubMed

Harvati, K

2000-05-01

Dental development is one aspect of growth that is linked to diet and to life history but has not been investigated among colobines since the work of Schultz [1935]. This study establishes the dental eruption sequence for several colobine species and compares it to that of other catarrhines. The mandibles and maxillae of two hundred and four juvenile colobine specimens were scored for presence or absence of permanent teeth and for stages of partial eruption. Eruption was defined as ranging between tooth emergence (any part of a tooth crown above the alveolar margin) and full occlusion, with three intermediate levels manifest between these boundaries. In African colobines, represented by C. guereza, C. angolensis and P. badius, M2 erupts before I2, and in C. angolensis it also erupts before I1. The canine is delayed, erupting after the premolars in females and after M3 in males. Asian colobines show greater diversity in eruption sequences. Nasalis shows no early eruption of the molars and is very similar to Macaca. In Trachypithecus and Pygathrix M(2) erupts before I(2). The canine in Trachypithecus is delayed, erupting after the premolars and, in some males, after M3. In Presbytis M2 erupts before both incisors; M3 erupts before C in both sexes, and often before both premolars. Although the actual timing of eruption is unknown, all colobine species examined except N. larvatus showed some degree of relatively early eruption of M2 and M3. The lack of this tendency in Nasalis sets this genus apart from all other colobines represented in this study. Dental eruption sequence is thought to reflect life history patterns. Early molar eruption in colobines was thought by Schultz (1935) to be a primitive character reflecting shorter life history. Faster growth rates found in folivorous primates have been interpreted as being related to an adaptation to folivory (Leigh 1994), and early eruption of molars may be part of this dietary specialization. The relationships between

Novel QTLs affecting rice kernel fissure resistance discovered in the cultivar ‘Saber’ augment those from ‘Cybonnet’

USDA-ARS?s Scientific Manuscript database

Kernel fissures in rice (Oryza sativa L.) caused by pre- or post-harvest stresses are the leading cause of breakage among milled rice. Such breakage causes economic losses for producers, millers, and marketers. Five QTLs for kernel fissure resistance (FR) were identified among a set of 275 RILs de...

Relationship between eruption plume heights and seismic source amplitudes of eruption tremors and explosion events

NASA Astrophysics Data System (ADS)

Mori, A.; Kumagai, H.

2016-12-01

It is crucial to analyze and interpret eruption tremors and explosion events for estimating eruption size and understanding eruption phenomena. Kumagai et al. (EPS, 2015) estimated the seismic source amplitudes (As) and cumulative source amplitudes (Is) for eruption tremors and explosion events at Tungurahua, Ecuador, by the amplitude source location (ASL) method based on the assumption of isotropic S-wave radiation in a high-frequency band (5-10 Hz). They found scaling relations between As and Is for eruption tremors and explosion events. However, the universality of these relations is yet to be verified, and the physical meanings of As and Is are not clear. In this study, we analyzed the relations between As and Is for eruption tremors and explosion events at active volcanoes in Japan, and estimated As and Is by the ASL method. We obtained power-law relations between As and Is, in which the powers were different between eruption tremors and explosion events. These relations were consistent with the scaling relations at Tungurahua volcano. Then, we compared As with maximum eruption plume heights (H) during eruption tremors analyzed in this study, and found that H was proportional to 0.21 power of As. This relation is similar to the plume height model based on the physical process of plume rise, which indicates that H is proportional to 0.25 power of volumetric flow rate for plinian eruptions. This suggests that As may correspond to volumetric flow rate. If we assume a seismic source with volume changes and far-field S-wave, As is proportional to the source volume rate. This proportional relation and the plume height model give rise to the relation that H is proportional to 0.25 power of As. These results suggest that we may be able to estimate plume heights in realtime by estimating As during eruptions from seismic observations.

Large Prominence Eruption [video

NASA Image and Video Library

2014-10-07

The STEREO (Behind) spacecraft captured this large prominence and corona mass ejection as they erupted into space (Sept. 26, 2014). By combining images from three instruments, scientists can see the eruption itself (in extreme UV light) as well as follow its progression over the period of about 13 hours with its two coronagraphs. Credit: NASA/Goddard/STEREO The STEREO (Behind) spacecraft captured this large prominence and corona mass ejection as they erupted into space (Sept. 26, 2014). By combining images from three instruments, scientists can see the eruption itself (in extreme UV light) as well as follow its progression over the period of about 13 hours with its two coronagraphs.

Io - Volcanic Eruption

NASA Technical Reports Server (NTRS)

1979-01-01

This photo of a volcanic eruption on Jupiter's satellite Io (dark fountain-like feature near the limb) was taken March 4, 1979, about 12 hours before Voyager 1's closest approach to Jupiter. This and the accompanying photo present the evidence for the first active volcanic eruption ever observed on another body in the solar system. This photo taken from a distance of 310,000 miles (499,000 kilometers), shows a plume-like structure rising more than 60 miles (100 kilometers) above the surface, a cloud of material being produced by an active eruption. At least four eruptions have been identified on Voyager 1 pictures and many more may yet be discovered on closer analysis. On a nearly airless body like Io, particulate material thrown out of a volcano follows a ballistic trajectory, accounting for the dome-like shape of the top of the cloud, formed as particles reach the top of their flight path and begin to fall back. Spherical expansion of outflowing gas forms an even larger cloud surrounding the dust. Several regions have been identified by the infrared instrument on Voyager 1 as being several hundred degrees Fahrenheit warmer than surrounding terrain, and correlated with the eruptions. The fact that several eruptions appear to be going on simultaneously makes Io the most active surface in the solar system and suggests to scientists that Io is undergoing continuous volcanism, revising downward the age of Io's surface once again. JPL manages and controls the Voyager Project for NASA's Office of Space Science.

Quantifying the condition of eruption column collapse during explosive volcanic eruptions

NASA Astrophysics Data System (ADS)

Koyaguchi, Takehiro; Suzuki, Yujiro

2016-04-01

During an explosive eruption, a mixture of pyroclasts and volcanic gas forms a buoyant eruption column or a pyroclastic flow. Generation of a pyroclastic flow caused by eruption column collapse is one of the most hazardous phenomena during explosive volcanic eruptions. The quantification of column collapse condition (CCC) is, therefore, highly desired for volcanic hazard assessment. Previously the CCC was roughly predicted by a simple relationship between magma discharge rate and water content (e.g., Carazzo et al., 2008). When a crater is present above the conduit, because of decompression/compression process inside/above the crater, the CCC based on this relationship can be strongly modified (Woods and Bower, 1995; Koyaguchi et al., 2010); however, the effects of the crater on CCC has not been fully understood in a quantitative fashion. Here, we have derived a semi-analytical expression of CCC, in which the effects of the crater is taken into account. The CCC depends on magma properties, crater shape (radius, depth and opening angle) as well as the flow rate at the base of crater. Our semi-analytical CCC expresses all these dependencies by a single surface in a parameter space of the dimensionless magma discharge rate, the dimensionless magma flow rate (per unit area) and the ratio of the cross-sectional areas at the top and the base of crater. We have performed a systematic parameter study of three-dimensional (3D) numerical simulations of eruption column dynamics to confirm the semi-analytical CCC. The results of the 3D simulations are consistent with the semi-analytical CCC, while they show some additional fluid dynamical features in the transitional state (e.g., partial column collapse). Because the CCC depends on such many parameters, the scenario towards the generation of pyroclastic flow during explosive eruptions is considered to be diverse. Nevertheless, our semi-analytical CCC together with the existing semi-analytical solution for the 1D conduit flow

Femtosecond Laser in situ Keratomileusis Flap Creation in Narrow Palpebral Fissure Eyes without Suction

PubMed Central

Chang, John S.M.; Law, Antony K.P.; Ng, Jack C.M.; Cheng, May S.Y.

2017-01-01

Purpose To evaluate a surgical technique used in eyes with narrow palpebral fissure undergoing femtosecond laser flap creation without suction during laser in situ keratomileusis (LASIK). Methods All data of 2 patient groups were collected through chart review. Group 1 consisted of 6 eyes with narrow palpebral fissure in which the suction ring was manually fixated and femtosecond laser was applied accordingly. Thirty comparison cases were randomly drawn from among eyes that underwent a standard LASIK procedure matched for age and preoperative refraction (group 2). Only 1 eye of each patient was selected to compare the refractive and visual outcomes between groups. Results In all group 1 eyes, the flaps were created successfully with manual fixation of the suction ring without suction. No eyes lost 2 or more lines of vision. No significant difference was found in the safety and refractive outcomes between groups. Conclusion Manual fixation of the suction ring in eyes with narrow palpebral fissure without suction was feasible for flap creation during LASIK. PMID:28690535

Sealing effectiveness of fissure sealant bonded with universal adhesive systems on saliva-contaminated and noncontaminated enamel.

PubMed

Memarpour, Mahtab; Shafiei, Fereshteh; Zarean, Mehran; Razmjoei, Faranak

2018-01-01

The effectiveness of sealants is dependent upon their adhesion to enamel surface. The aim of the study was to evaluate the sealing ability of a pit and fissure sealant used with a universal adhesive (etch-and-rinse vs. self-etch modes) when the site is contaminated with saliva. Adhesive properties were evaluated as microleakage and scanning electron microscopic (SEM) characteristics. A total of 72 mandibular third molars were randomly divided into 6 groups (n=12). Occlusal pits and fissures were sealed with an unfilled resin fissure sealant (FS) material with or without saliva contamination. The groups included: 1) phosphoric acid etching + FS (control), 2) phosphoric acid etching + Scotchbond Universal (etch-and-rinse) + FS, 3) phosphoric acid etching + saliva + Scotchbond Universal (etch-and-rinse) + FS, 4) Scotchbond Universal (self-etching) + FS,5) Scotchbond Universal (self-etching) + saliva + FS, and 6) Scotchbond Universal (self-etching) + saliva + Scotchbond Universal + FS. After thermocycling, the teeth were placed in 0.5% fuchsin, sectioned, and evaluated by digital microscopy. Two samples from each group were also observed by SEM. The data were analyzed with Kruskal-Wallis and Mann-Whitney tests for a significance of p <0.05. There were significant differences among groups. Groups 1,2 and 4 showed the least microleakage, with no significant differences among groups. Saliva contamination led to increased microleakage and gap formation in SEM images in groups 3, 5 and 6. The fissure sealing ability of the universal adhesive in etch-and-rinse or self-etch modes was similar to that of conventional acid etching. Saliva contamination had a negative effect on sealant adhesion to pretreated enamel. Key words: Pit and fissure sealant, Universal adhesive, Saliva.

Modelling of Subglacial Volcanic and Geothermal Activity, during the 2014-15 Bárdarbunga-Holuhraun Eruption and Caldera Collapse

NASA Astrophysics Data System (ADS)

Reynolds, H. I.; Gudmundsson, M. T.; Hognadottir, T.

2015-12-01

Seismic unrest was observed within the subglacial caldera of Bárdarbunga on 16 August 2014, followed by seismicity tracing the path of a lateral dyke extending underneath the Vatnajökull glacier out to 45 km to the north east of the volcano. A short subaerial fissure eruption occurred at the site of the Holuhraun lavas, just north of the glacier edge on 29 August, before recommencing in earnest on 31 August with a large effusive eruption and accompanying slow caldera collapse, which lasted for approximately 6 months. The glacier surface around Bárdarbunga was monitored using aerial altimeter profiling. Several shallow depressions, known as ice cauldrons, formed around the caldera rim and on Dyngjujökull glacier above the dyke propagation path. The cauldrons range in volume from approximately 0.0003 km3 to 0.02 km3. Two types of melting were observed: high initial heat flux over a period of days which gradually disappears; and slower but more sustained melting rates. We present time series data of the development and evolution of these cauldrons, with estimates of the heat flux magnitudes involved.The nature of the heat source required to generate these cauldrons is not obvious. Two scenarios are explored: 1) small subglacial eruptions; or 2) increased geothermal activity induced by the dyke intrusion. We investigate these scenarios using numerical modelling, considering the surface heat flux produced, and timescales and spatial extent of associated surface anomalies. It is found that a magmatic intrusion into rocks where the groundwater is near the boiling point curve can cause rapid increase in geothermal activity, but even a shallow intrusion into a cold groundwater reservoir will have a muted thermal response. Thus, our results indicate that minor subglacial eruptions are the most plausible explanation for the observed rapid melting far from known geothermal areas. These results have implications for the interpretation of thermal signals observed at ice

Initiation of Solar Eruptions

NASA Technical Reports Server (NTRS)

Sterling, Alphonse C.; Moore, Ronald L.

2007-01-01

We consider processes occurring just prior to and at the start of the onset of flare- and CME-producing solar eruptions. Our recent work uses observations of filament motions around the time of eruption onset as a proxy for the evolution of the fields involved in the eruption. Frequently the filaments show a slow rise prior to fast eruption, indicative of a slow expansion of the field that is about co explode. Work by us and others suggests that reconnection involving emerging or canceling flux results in a lengthening of fields restraining the filament-carrying field, and the consequent upward expansion of the field in and around the filament produces the filament's slow rise: that is, the reconnection weakens the magnetic "tethers" ("tether-weakening" reconnection), and results in the slow rise of the filament. It is still inconclusive, however, what mechanism is responsible for the switch from the slow rise to the fast eruption.

Eruptive parameters and dynamics of the April 2015 sub-Plinian eruptions of Calbuco volcano (southern Chile)

NASA Astrophysics Data System (ADS)

Castruccio, Angelo; Clavero, Jorge; Segura, Andrea; Samaniego, Pablo; Roche, Olivier; Le Pennec, Jean-Luc; Droguett, Bárbara

2016-09-01

We conducted geological and petrological analyses of the tephra fallout and pyroclastic density current (PDC) products of the 22-23 April 2015 Calbuco eruptions. The eruptive cycle consisted of two sub-Plinian phases that generated > 15 km height columns and PDCs that travelled up to 6 km from the vent. The erupted volume is estimated at 0.38 km3 (non-DRE), with approximately 90% corresponding to tephra fall deposits and the other 10% to PDC deposits. The erupted products are basaltic-andesite, 54-55 wt.% SiO2, with minor amounts of andesite (58 wt.% SiO2). Despite the uniform composition of the products, there are at least four types of textures in juvenile clasts, with different degrees of vesicularity and types and content of crystals. We propose that the eruption triggering mechanism was either exsolution of volatiles due to crystallization, or a small intrusion into the base of the magma chamber, without significant magma mixing or with a magma compositionally similar to that of the residing magma. In either case the triggering mechanism generated convection and sufficient overpressure to promote the first eruptive phase. The start of the eruption decompressed the chamber, promoting intense vesiculation of the remaining magma and an increase in eruption rate towards the end of the eruption.

Eruptive Source Parameters from Near-Source Gravity Waves Induced by Large Vulcanian eruptions

NASA Astrophysics Data System (ADS)

Barfucci, Giulia; Ripepe, Maurizio; De Angelis, Silvio; Lacanna, Giorgio; Marchetti, Emanuele

2016-04-01

The sudden ejection of hot material from volcanic vent perturbs the atmosphere generating a broad spectrum of pressure oscillations from acoustic infrasound (<10 Hz) to gravity waves (<0.03 Hz). However observations of gravity waves excited by volcanic eruptions are still rare, mostly limited to large sub-plinian eruptions and frequently at large distance from the source (>100 km). Atmospheric Gravity waves are induced by perturbations of the hydrostatic equilibrium of the atmosphere and propagate within a medium with internal density stratification. They are initiated by mechanisms that cause the atmosphere to be displaced as for the injection of volcanic ash plume during an eruption. We use gravity waves to infer eruptive source parameters, such as mass eruption rate (MER) and duration of the eruption, which may be used as inputs in the volcanic ash transport and dispersion models. We present the analysis of near-field observations (<7 km) of atmospheric gravity waves, with frequencies of 0.97 and 1.15 mHz, recorded by a pressure sensors network during two explosions in July and December 2008 at Soufrière Hills Volcano, Montserrat. We show that gravity waves at Soufrière Hills Volcano originate above the volcanic dome and propagate with an apparent horizontal velocities of 8-10 m/s. Assuming a single mass injection point source model, we constrain the source location at ~3.5 km a.s.l., above the vent, duration of the gas thrust < 140 s and MERs of 2.6 and 5.4 x10E7 kg/s, for the two eruptive events. Source duration and MER derived by modeling Gravity Waves are fully compatible with others independent estimates from field observations. Our work strongly supports the use of gravity waves to model eruption source parameters and can have a strong impact on our ability to monitor volcanic eruption at a large distance and may have future application in assessing the relative magnitude of volcanic explosions.

Anal self-massage in the treatment of acute anal fissure: a randomized prospective study.

PubMed

Gaj, Fabio; Biviano, Ivano; Candeloro, Laura; Andreuccetti, Jacopo

2017-01-01

An anal fissure (AF) is a tear in the epithelial lining of the anal canal. This is a very common condition, but the choice of treatment is unclear. The use of anal dilators is effective, economic, and safe. The aim of the study was to compare the efficacy of two conservative treatments, the use of anal dilators or a finger for anal dilatation, in reducing anal pressure and resolving anal fissures. Fifty patients with a clinical diagnosis of AF were randomly assigned to one of the treatments, self-massage of the anal sphincter (group A, 25 patients) or passive dilatation using dilators (group B, 25 patients). All patients were evaluated at baseline, at the end of treatment, and after 12 weeks and 6 months. Pain was measured using a visual analog scale. After the treatment, 60% of patients treated with dilators and 80% of patients treated with anal self-massage using a finger showed disappearance of their anal fissures. A comparison between signs and symptoms reported by the patients in the two groups showed a statistically significant reduction in anal pain (group A, P=0.0001; group B, P=0.0001) and bleeding after defecation (group A, P=0.001, group B, P=0.001). At 6 months after treatment, a significantly greater reduction in anal pain was observed in Group A compared to Group B (P=0.02). The use of anal self-massage with a finger appears to induce a better resolution of acute anal fissure than do anal dilators, and in a shorter time.

The June 2014 eruption of Piton de la Fournaise: Insights from field, textural and geochemical data

NASA Astrophysics Data System (ADS)

Gurioli, Lucia; Vlastelic, Ivan; Di Muro, Andrea; Boudoire, Guillaume; Moune, Séverine; Bachelery, Patrick; Villeneuve, Nicolas

2015-04-01

The June 20st, 2014 eruption of Piton de la Fournaise (PdF) represents the first eruption after 3.5 years of quiescence of this very active basaltic volcano. The eruption occurred on the SE slopes of the central cone and was short-lived, lasting only 20 hours and producing a short (1.5 km long) lava flow and a very weak (low) hawaiian to strombolian activity along the eruptive fissure. Here we discuss the first detailed dataset on PdF products integrating field, componentry, texture and chemical data on the 2014 eruptive products. The most intense activity occurred close to the lower tip of the eruptive fracture and dispersed a very small scoria fall out deposit. The deposit is inversely graded from lapilli to bombs, with minor coarse ash and comprises mainly juvenile scoriae with (very) minor, non-juvenile fragments of old scoriae and lava. The juvenile component is characterized by three groups of scoria: (i) spiny-opaque, (ii) spiny-iridescent, and (iii) fluidal, along with golden pumice. Density analyses performed on 200 coarse lapilli reveal a correlation between porosity and morphology, so that the spiny-opaque clasts are the densest (up to 1.60 x 103 kg m-3, for a vesicularity of 45%) and the golden pumice are the lightest (minimum density of 0.4 x 103 kg m-3 for a vesicularity of up to 86 %; DRE: 2.88 x 103 kg m-3). The increase in vesicularity correlates with an increase in number of small vesicles and a decrease in the large, coalesced vesicles. The connectivity data also indicate that the fluidal and golden (hawaiian-like) clasts have more isolated vesicles (up to 40%) than the spiny (strombolian-like) clasts (0-5%). The strong variation in density is controlled not only by the vesicularity, but also by the crystal content: the densest, spiny opaque fragments are the richest in microphenocrysts and microlites of plagioclase, pyroxene and olivine. The glass chemistry of each of the four clast types allows us to correlate porosity and oxide content: while

Intrusion Triggering of Explosive Eruptions: Lessons Learned from EYJAFJALLAJÖKULL 2010 Eruptions and Crustal Deformation Studies

NASA Astrophysics Data System (ADS)

Sigmundsson, F.; Hreinsdottir, S.; Hooper, A. J.; Arnadottir, T.; Pedersen, R.; Roberts, M. J.; Oskarsson, N.; Auriac, A.; Decriem, J.; Einarsson, P.; Geirsson, H.; Hensch, M.; Ofeigsson, B. G.; Sturkell, E. C.; Sveinbjornsson, H.; Feigl, K.

2010-12-01

Gradual inflation of magma chambers often precedes eruptions at highly active volcanoes. During eruptions, rapid deflation occurs as magma flows out and pressure is reduced. Less is known about the deformation style at moderately active volcanoes, such as Eyjafjallajökull, Iceland, where an explosive summit eruption of trachyandesite beginning on 14 April 2010 caused exceptional disruption to air traffic. This eruption was preceded by an effusive flank eruption of olivine basalt from 20 March - 12 April 2010. Geodetic and seismic observations revealed the growth of an intrusive complex in the roots of the volcano during three months prior to eruptions. After initial horizontal growth, modelling indicates both horizontal and sub-vertical growth in three weeks prior the first eruption. The behaviour is attributed to subsurface variations in crustal stress and strength originating from complicated volcano foundations. A low-density layer may capture magma allowing pressure to build before an intrusion can ascend towards higher levels. The intrusive complex was formed by olivine basalt as erupted on the volcano flank 20 March - 12 April; the intrusive growth halted at the onset of this eruption. Deformation associated with the eruption onset was minor as the dike had reached close to the surface in the days before. Isolated eruptive vents opening on long-dormant volcanoes may represent magma leaking upwards from extensive pre-eruptive intrusions formed at depth. A deflation source activated during the summit eruption of trachyandesite is distinct from, and adjacent to, all documented sources of inflation in the volcano roots. Olivine basalt magma which recharged the volcano appears to have triggered the summit eruption, although the exact mode of triggering is uncertain. Scenarios include stress triggering or propagation of olivine basalt into more evolved magma. The trachyandesite includes crystals that can be remnants of minor recent intrusion of olivine basalt

Thermodynamics of gas and steam-blast eruptions

USGS Publications Warehouse

Mastin, L.G.

1995-01-01

Eruptions of gas or steam and non-juvenile debris are common in volcanic and hydrothermal areas. From reports of non-juvenile eruptions or eruptive sequences world-wide, at least three types (or end-members) can be identified: (1) those involving rock and liquid water initially at boiling-point temperatures ('boiling-point eruptions'); (2) those powered by gas (primarily water vapor) at initial temperatures approaching magmatic ('gas eruptions'); and (3) those caused by rapid mixing of hot rock and ground- or surface water ('mixing eruptions'). For these eruption types, the mechanical energy released, final temperatures, liquid water contents and maximum theoretical velocities are compared by assuming that the erupting mixtures of rock and fluid thermally equilibrate, then decompress isentropically from initial, near-surface pressure (???10 MPa) to atmospheric pressure. Maximum mechanical energy release is by far greatest for gas eruptions (??????1.3 MJ/kg of fluid-rock mixture)-about one-half that of an equivalent mass of gunpowder and one-fourth that of TNT. It is somewhat less for mixing eruptions (??????0.4 MJ/kg), and least for boiling-point eruptions (??????0.25 MJ/kg). The final water contents of crupted boiling-point mixtures are usually high, producing wet, sloppy deposits. Final erupted mixtures from gas eruptions are nearly always dry, whereas those from mixing eruptions vary from wet to dry. If all the enthalpy released in the eruptions were converted to kinetic energy, the final velocity (vmax) of these mixtures could range up to 670 m/s for boiling-point eruptions and 1820 m/s for gas eruptions (highest for high initial pressure and mass fractions of rock (mr) near zero). For mixing eruptions, vmax ranges up to 1150 m/s. All observed eruption velocities are less than 400 m/s, largely because (1) most solid material is expelled when mr is high, hence vmax is low; (2) observations are made of large blocks the velocities of which may be less than the

Increased anal basal pressure in chronic anal fissures may be caused by overreaction of the anal-external sphincter continence reflex.

PubMed

van Meegdenburg, Maxime M; Trzpis, Monika; Heineman, Erik; Broens, Paul M A

2016-09-01

Chronic anal fissure is a painful disorder caused by linear ulcers in the distal anal mucosa. Even though it counts as one of the most common benign anorectal disorders, its precise etiology and pathophysiology remains unclear. Current thinking is that anal fissures are caused by anal trauma and pain, which leads to internal anal sphincter hypertonia. Increased anal basal pressure leads to diminished anodermal blood flow and local ischemia, which delays healing and leads to chronic anal fissure. The current treatment of choice for chronic anal fissure is either lateral internal sphincterotomy or botulinum toxin injections. In contrast to current thinking, we hypothesize that the external, rather than the internal, anal sphincter is responsible for increased anal basal pressure in patients suffering from chronic anal fissure. We think that damage to the anal mucosa leads to hypersensitivity of the contact receptors of the anal-external sphincter continence reflex, resulting in overreaction of the reflex. Overreaction causes spasm of the external anal sphincter. This in turn leads to increased anal basal pressure, diminished anodermal blood flow, and ischemia. Ischemia, finally, prevents the anal fissure from healing. Our hypothesis is supported by two findings. The first concerned a chronic anal fissure patient with increased anal basal pressure (170mmHg) who had undergone lateral sphincterotomy. Directly after the operation, while the submucosal anesthetic was still active, basal anal pressure decreased to 80mmHg. Seven hours after the operation, when the anesthetic had completely worn off, basal anal pressure increased again to 125mmHg, even though the internal anal sphincter could no longer be responsible for the increase. Second, in contrast to previous studies, recent studies demonstrated that botulinum toxin influences external anal sphincter activity and, because it is a striated muscle relaxant, it seems reasonable to presume that it affects the striated

Conduit margin heating and deformation during the AD 1886 basaltic Plinian eruption at Tarawera volcano, New Zealand.

PubMed

Schauroth, Jenny; Wadsworth, Fabian B; Kennedy, Ben; von Aulock, Felix W; Lavallée, Yan; Damby, David E; Vasseur, Jérémie; Scheu, Bettina; Dingwell, Donald B

During explosive eruptions, a suspension of gas and pyroclasts rises rapidly within a conduit. Here, we have analysed textures preserved in the walls of a pyroclastic feeder dyke of the AD 1886 Tarawera basaltic Plinian fissure eruption. The samples examined consist of basaltic ash and scoria plastered onto a conduit wall of a coherent rhyolite dome and a welded rhyolitic dome breccia. We examine the textural evidence for the response of the wall material, built of ∼75 vol.% glass and ∼25 vol.% crystals (pore-free equivalent), to mass movement in the adjacent conduit. In the rhyolitic wall material, we quantify the orientation and aspect ratio of biotite crystals as strain markers of simple shear deformation, and interpret juxtaposed regions of vesiculation and vesicle collapse as evidence of conduit wall heating. Systematic changes occur close to the margin: (1) porosity is highly variable, with areas locally vesiculated or densified, (2) biotite crystals are oriented with their long axis parallel to the margin, (3) the biotites have greater aspect ratios close to the margin and (4) the biotite crystals are fractured. We interpret the biotite phenocryst deformation to result from crystal fracture, rotation and cleavage-parallel bookcase translation. These textural observations are inferred to indicate mechanical coupling between the hot gas-ash jet and the conduit wall and reheating of wall rock rhyolite. We couple these observations with a simple 1D conductive heating model to show what minimum temperature the conduit wall needs to reach in order to achieve a temperature above the glass transition throughout the texturally-defined deformed zone. We propose that conduit wall heating and resulting deformation influences conduit margin outgassing and may enhance the intensity of such large basaltic eruptions.

Prediction of Solar Eruptions Using Filament Metadata

NASA Astrophysics Data System (ADS)

Aggarwal, Ashna; Schanche, Nicole; Reeves, Katharine K.; Kempton, Dustin; Angryk, Rafal

2018-05-01

We perform a statistical analysis of erupting and non-erupting solar filaments to determine the properties related to the eruption potential. In order to perform this study, we correlate filament eruptions documented in the Heliophysics Event Knowledgebase (HEK) with HEK filaments that have been grouped together using a spatiotemporal tracking algorithm. The HEK provides metadata about each filament instance, including values for length, area, tilt, and chirality. We add additional metadata properties such as the distance from the nearest active region and the magnetic field decay index. We compare trends in the metadata from erupting and non-erupting filament tracks to discover which properties present signs of an eruption. We find that a change in filament length over time is the most important factor in discriminating between erupting and non-erupting filament tracks, with erupting tracks being more likely to have decreasing length. We attempt to find an ensemble of predictive filament metadata using a Random Forest Classifier approach, but find the probability of correctly predicting an eruption with the current metadata is only slightly better than chance.

Medium-term results of anal advancement flap compared with lateral sphincterotomy for the treatment of anal fissure.

PubMed

Patel, Sanjay D; Oxenham, Tom; Praveen, Bhandhipalyan V

2011-09-01

Anal fissure is associated with anal pain and bleeding. Lateral internal sphincterotomy (LIS) has been a common form of surgical management. This can however cause incontinence and hence an equally effective alternative without this risk would be ideal. Anal fissurectomy and an anal advancement flap (AAF) have been used as an alternative to LIS. We carried out a retrospective analysis of the results of AAF and LIS for the treatment of anal fissure. Fifty patients underwent AAF and a further 50 cases were chosen who had undergone LIS over the same time period. Patient and procedural data were collected including post-operative course. Presenting symptoms included anal pain (94%), rectal bleeding (77%) and constipation (15%). Mean (±SD) follow-up was 20 ± 12 months in the AAF group vs 22 ± 12.5 months in the LIS group. Healing of fissure was achieved in 96% of patients after AAF and 88% after LIS (p = 0.27). Resolution of symptoms was achieved in 90% after AAF and 72% of patients after LIS (p = 0.04). LIS was associated with an increased incidence of readmission with infection and pain (8% vs 4%, p = 0.35). Seven patients whom had undergone successful AAF with complete resolution of symptoms had previously had LIS with failure of symptom relief. There was no incidence of faecal incontinence in either group. AAF is associated with a higher incidence of symptomatic relief and fissure healing and lower incidence of complications when compared with LIS. AAF is effective at healing fissures which are refractory to LIS.

Evaluation of different types of enamel conditioning before application of a fissure sealant.

PubMed

Ciucchi, Philip; Neuhaus, Klaus W; Emerich, Marta; Peutzfeldt, Anne; Lussi, Adrian

2015-01-01

The aim of the study was to compare fissure sealant quality after mechanical conditioning of erbium-doped yttrium aluminium garnet (Er:YAG) laser or air abrasion prior to chemical conditioning of phosphoric acid etching or of a self-etch adhesive. Twenty-five permanent molars were initially divided into three groups: control group (n = 5), phosphoric acid etching; test group 1 (n = 10), air abrasion; and test group 2, (n = 10) Er:YAG laser. After mechanical conditioning, the test group teeth were sectioned buccolingually and the occlusal surface of one half tooth (equal to one sample) was acid etched, while a self-etch adhesive was applied on the other half. The fissure system of each sample was sealed, thermo-cycled and immersed in 5% methylene dye for 24 h. Each sample was sectioned buccolingually, and one slice was analysed microscopically. Using specialized software microleakage, unfilled margin, sealant failure and unfilled area proportions were calculated. A nonparametric ANOVA model was applied to compare the Er:YAG treatment with that of air abrasion and the self-etch adhesive with phosphoric acid (α = 0.05). Test groups were compared to the control group using Wilcoxon rank sum tests (α = 0.05). The control group displayed significantly lower microleakage but higher unfilled area proportions than the Er:YAG laser + self-etch adhesive group and displayed significantly higher unfilled margin and unfilled area proportions than the air-abrasion + self-etch adhesive group. There was no statistically significant difference in the quality of sealants applied in fissures treated with either Er:YAG laser or air abrasion prior to phosphoric acid etching, nor in the quality of sealants applied in fissures treated with either self-etch adhesive or phosphoric acid following Er:YAG or air-abrasion treatment.

Forecasting eruptions of Mauna Loa Volcano, Hawaii

NASA Astrophysics Data System (ADS)

Decker, Robert W.; Klein, Fred W.; Okamura, Arnold T.; Okubo, Paul G.

Past eruption patterns and various kinds of precursors are the two basic ingredients of eruption forecasts. The 39 historical eruptions of Mauna Loa from 1832 to 1984 have intervals as short as 104 days and as long as 9,165 days between the beginning of an eruption and the beginning of the next one. These recurrence times roughly fit a Poisson distribution pattern with a mean recurrence time of 1,459 days, yielding a probability of 22% (P=.22) for an eruption of Mauna Loa during any next year. The long recurrence times since 1950, however, suggest that the probability is not random, and that the current probability for an eruption during the next year may be as low as 6%. Seismicity beneath Mauna Loa increased for about two years prior to the 1975 and 1984 eruptions. Inflation of the summit area took place between eruptions with the highest rates occurring for a year or two before and after the 1975 and 1984 eruptions. Volcanic tremor beneath Mauna Loa began 51 minutes prior to the 1975 eruption and 115 minutes prior to the 1984 eruption. Eruption forecasts were published in 1975, 1976, and 1983. The 1975 and 1983 forecasts, though vaguely worded, were qualitatively correct regarding the timing of the next eruption. The 1976 forecast was more quantitative; it was wrong on timing but accurate on forecasting the location of the 1984 eruption. This paper urges that future forecasts be specific so they can be evaluated quantitatively.

Models of volcanic eruption hazards

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wohletz, K.H.

1992-01-01

Volcanic eruptions pose an ever present but poorly constrained hazard to life and property for geothermal installations in volcanic areas. Because eruptions occur sporadically and may limit field access, quantitative and systematic field studies of eruptions are difficult to complete. Circumventing this difficulty, laboratory models and numerical simulations are pivotal in building our understanding of eruptions. For example, the results of fuel-coolant interaction experiments show that magma-water interaction controls many eruption styles. Applying these results, increasing numbers of field studies now document and interpret the role of external water eruptions. Similarly, numerical simulations solve the fundamental physics of high-speed fluidmore » flow and give quantitative predictions that elucidate the complexities of pyroclastic flows and surges. A primary goal of these models is to guide geologists in searching for critical field relationships and making their interpretations. Coupled with field work, modeling is beginning to allow more quantitative and predictive volcanic hazard assessments.« less

Models of volcanic eruption hazards

NASA Astrophysics Data System (ADS)

Wohletz, K. H.

Volcanic eruptions pose an ever present but poorly constrained hazard to life and property for geothermal installations in volcanic areas. Because eruptions occur sporadically and may limit field access, quantitative and systematic field studies of eruptions are difficult to complete. Circumventing this difficulty, laboratory models and numerical simulations are pivotal in building our understanding of eruptions. For example, the results of fuel-coolant interaction experiments show that magma-water interaction controls many eruption styles. Applying these results, increasing numbers of field studies now document and interpret the role of external water eruptions. Similarly, numerical simulations solve the fundamental physics of high-speed fluid flow and give quantitative predictions that elucidate the complexities of pyroclastic flows and surges. A primary goal of these models is to guide geologists in searching for critical field relationships and making their interpretations. Coupled with field work, modeling is beginning to allow more quantitative and predictive volcanic hazard assessments.

Campaign gravity results From kilauea volcano, hawaii, 2009-2011

NASA Astrophysics Data System (ADS)

Wilkinson, S. K.; Poland, M. P.; Battaglia, M.

2011-12-01

The gravity and leveling networks at Kilauea's summit caldera consist of approximately 60 benchmarks that are measured with a gravimeter as well as leveled for elevation data. Gravity data were collected in December 2009, June 2010 and March 2011. Elevation data were collected in 2009 and 2010. For the gravity survey completed in March 2011, we use InSAR and GPS data to assess elevation changes at the time of the gravity survey. During December 2009-March 2011, Kilauea's summit was characterized by minor deflation, following trends established in mid-2007. In mid-2010, however, the summit began to inflate, with a rate that increased significantly in October 2010. This inflation was associated with a decrease in the effusion rate from the volcano's east rift zone eruptive vents, suggesting that Kilauea's magma plumbing system was backing up. On March 5, 2011, a 2-km-long fissure eruption began about 3 km west of Pu`u `O`o, causing rapid summit deflation as magma drained from beneath the summit to feed the new eruptive vents. The fissure eruption ended on March 9, at which time the summit began to reinflate. Preliminary analysis of gravity data collected before and after the fissure eruption indicates a complex pattern of mass flow beneath the summit caldera. Net summit deformation was negligible between December 2009 and June 2010, but there is a residual gravity high centered near Halema'uma'u Crater. For the December 2009 to March 2011 time period, the caldera shows net subsidence. A positive residual gravity anomaly is located southeast of Halema'uma'u Crater while a negative residual gravity anomaly exists north of Halema'uma'u Crater. These patterns are somewhat unexpected, given the sudden draining of magma from beneath the summit during the March 5-9 fissure eruption. We conclude that the campaign gravity data were not collected at the optimal times to "catch" this event. Nevertheless, the data can still be used to assess different aspects of Kilauea's magma

Double-porosity models for a fissured groundwater reservoir with fracture skin

USGS Publications Warehouse

Moench, Allen F.

1984-01-01

Theories of flow to a well in a double-porosity groundwater reservoir are modified to incorporate effects of a thin layer of low-permeability material or fracture skin that may be present at fracture-block interfaces as a result of mineral deposition or alteration. The commonly used theory for flow in double- porosity formations that is based upon the assumption of pseudo–steady state block-to-fissure flow is shown to be a special case of the theory presented in this paper. The latter is based on the assumption of transient block-to-fissure flow with fracture skin. Under conditions where fracture skin has a hydraulic conductivity that is less than that of the matrix rock, it may be assumed to impede the interchange of fluid between the fissures and blocks. Resistance to flow at fracture-block interfaces tends to reduce spatial variation of hydraulic head gradients within the blocks. This provides theoretical justification for neglecting the divergence of flow in the blocks as required by the pseudo–steady state flow model. Coupled boundary value problems for flow to a well discharging at a constant rate were solved in the Laplace domain. Both slab-shaped and sphere-shaped blocks were considered, as were effects of well bore storage and well bore skin. Results obtained by numerical inversion were used to construct dimensionless-type curves that were applied to well test data, for a pumped well and for an observation well, from the fractured volcanic rock terrane of the Nevada Test Site.

Sealing effectiveness of fissure sealant bonded with universal adhesive systems on saliva-contaminated and noncontaminated enamel

PubMed Central

Shafiei, Fereshteh; Zarean, Mehran; Razmjoei, Faranak

2018-01-01

Background The effectiveness of sealants is dependent upon their adhesion to enamel surface. The aim of the study was to evaluate the sealing ability of a pit and fissure sealant used with a universal adhesive (etch-and-rinse vs. self-etch modes) when the site is contaminated with saliva. Adhesive properties were evaluated as microleakage and scanning electron microscopic (SEM) characteristics. Material and Methods A total of 72 mandibular third molars were randomly divided into 6 groups (n=12). Occlusal pits and fissures were sealed with an unfilled resin fissure sealant (FS) material with or without saliva contamination. The groups included: 1) phosphoric acid etching + FS (control), 2) phosphoric acid etching + Scotchbond Universal (etch-and-rinse) + FS, 3) phosphoric acid etching + saliva + Scotchbond Universal (etch-and-rinse) + FS, 4) Scotchbond Universal (self-etching) + FS,5) Scotchbond Universal (self-etching) + saliva + FS, and 6) Scotchbond Universal (self-etching) + saliva + Scotchbond Universal + FS. After thermocycling, the teeth were placed in 0.5% fuchsin, sectioned, and evaluated by digital microscopy. Two samples from each group were also observed by SEM. The data were analyzed with Kruskal-Wallis and Mann-Whitney tests for a significance of p<0.05. Results There were significant differences among groups. Groups 1,2 and 4 showed the least microleakage, with no significant differences among groups. Saliva contamination led to increased microleakage and gap formation in SEM images in groups 3, 5 and 6. Conclusions The fissure sealing ability of the universal adhesive in etch-and-rinse or self-etch modes was similar to that of conventional acid etching. Saliva contamination had a negative effect on sealant adhesion to pretreated enamel. Key words:Pit and fissure sealant, Universal adhesive, Saliva. PMID:29670708

Comparative study of Ksharasutra suturing and Lord's anal dilatation in the management of Parikartika (chronic fissure-in-ano)

PubMed Central

Dudhamal, Tukaram S.; Baghel, Madhav Singh; Bhuyan, Chaturbhuja; Gupta, Sanjay Kumar

2014-01-01

Background: Parikartika resembles fissure-in-ano which is very common among all ano-rectal disorders. In Ayurvedic texts, Parikartika is described as a complication of Vamana and Virechana as well as complication of Atisara. Ksharasutra was proved successful in the management of fistula-in-ano, piles, and there is a need to try its efficacy in fissure-in-ano. Aim: To evaluate the role of Ksharasutra suturing (KSS) in fissure bed in chronic fissure-in-ano. Materials and Methods: Total 100 patients of chronic fissure-in-ano were selected and randomly divided into two groups (50 in each group). In group-A, patients were undergone by KSS; while in patients of Group-B Lord's anal dilatation followed by KSS was done under spinal anesthesia. The KSS was done once and after slough out of Ksharasutra, the wound was treated for 4 weeks and assessment of the result was done on the basis of gradation adopted. Results: The pain relief on 14th day in Group-A was 86% while in Group-B 100% was observed. As on 7th day in Group-A, oozing was stopped in 68% patients, while in Group-B, oozing was stopped in 82% patients. On 21st day, Group-B showed more healing (85%) as compared to Group-A (69%). In this study 68% of patients were cured. Conclusion: In Group-B (KSS with Lord's anal dilatation) patients were cured early as compared to patients of Group-A (KSS alone). PMID:25558158

Comparative study of Ksharasutra suturing and Lord's anal dilatation in the management of Parikartika (chronic fissure-in-ano).

PubMed

Dudhamal, Tukaram S; Baghel, Madhav Singh; Bhuyan, Chaturbhuja; Gupta, Sanjay Kumar

2014-04-01

Parikartika resembles fissure-in-ano which is very common among all ano-rectal disorders. In Ayurvedic texts, Parikartika is described as a complication of Vamana and Virechana as well as complication of Atisara. Ksharasutra was proved successful in the management of fistula-in-ano, piles, and there is a need to try its efficacy in fissure-in-ano. To evaluate the role of Ksharasutra suturing (KSS) in fissure bed in chronic fissure-in-ano. Total 100 patients of chronic fissure-in-ano were selected and randomly divided into two groups (50 in each group). In group-A, patients were undergone by KSS; while in patients of Group-B Lord's anal dilatation followed by KSS was done under spinal anesthesia. The KSS was done once and after slough out of Ksharasutra, the wound was treated for 4 weeks and assessment of the result was done on the basis of gradation adopted. The pain relief on 14(th) day in Group-A was 86% while in Group-B 100% was observed. As on 7(th) day in Group-A, oozing was stopped in 68% patients, while in Group-B, oozing was stopped in 82% patients. On 21(st) day, Group-B showed more healing (85%) as compared to Group-A (69%). In this study 68% of patients were cured. In Group-B (KSS with Lord's anal dilatation) patients were cured early as compared to patients of Group-A (KSS alone).

Serreta 1998-2001 submarine volcanic eruption, offshore Terceira (Azores): Characterization of the vent and inferences about the eruptive dynamics

NASA Astrophysics Data System (ADS)

Casas, David; Pimentel, Adriano; Pacheco, José; Martorelli, Eleonora; Sposato, Andrea; Ercilla, Gemma; Alonso, Belen; Chiocci, Francesco

2018-05-01

High-resolution bathymetric data and seafloor sampling were used to characterize the most recent volcanic eruption in the Azores region, the 1998-2001 Serreta submarine eruption. The vent of the eruption is proposed to be an asymmetric topographic high, composed of two coalescing volcanic cones, underlying the location where lava balloons had been observed at the sea surface during the eruption. The volcanic products related to the 1998-2001 eruption are constrained to an area of 0.5 km2 around the proposed vent position. A submarine Strombolian-style eruption producing basaltic lava balloons, ash and coarse scoriaceous materials with limited lateral dispersion led to the buildup of the cones. The 1998-2001 Serreta eruption shares many similarities with other intermediate-depth lava balloon-forming eruptions (e.g., the 1891 eruption offshore Pantelleria and the 2011-2012 eruption south of El Hierro), revealing the particular conditions needed for the production of this unusual and scarcely documented volcanic product.

Grain size and shape analysis of the AD 1226 tephra layer, Reykjanes volcanic system

NASA Astrophysics Data System (ADS)

Ösp Magnúsdóttir, Agnes; Höskuldsson, Ármann; Larsen, Guðrún; Tumi Guðmunsson, Magnús; Sigurgeirsson, Magnús Á.

2014-05-01

Recent explosive eruptions in Iceland have drawn attention to long range tephra transport in the atmosphere. In Iceland tephra forming explosion eruptions are frequent, due to abundance of water. However, the volcanism on the island is principally basaltic. Volcanism along the Reykjanes Peninsula is divided into five distinct volcanic systems. Volcano-tectonic activity within these systems is periodic, with recurrence intervals in the range of 1 ka. Last volcano-tectonic sequence began around AD 940, shortly after settlement of Iceland, and lasted through AD 1340. During this period activity was characterized by basaltic fissure eruptions. Furthermore, this activity period on the Reykjanes peninsula began within the eastern most volcanic system and gradually moved towards the west across the peninsula. The 1226 eruption was a basaltic fissure eruption with in the Reykjanes volcanic system. The eruption began on land and gradually progressed towards the SW until the volcanic fissure extended into the sea. Water-magma interaction changed the eruption from effusive into explosive forming the largest tephra layer on the peninsula. Due to its close proximity to the Keflavik international airport and that of the capital of Iceland it is important to get an insight into, the characteristics, generation and distribution of such tephra deposits. In this eruption the tephra produced had an approximate volume of 0.1 km3 and covered an area of some 3500 km2 within the 0.5 cm isopach. Total grain size distribution of this tephra layer will be presented along with analysis of principal grain shapes of the finer portion of the tephra layer as a function of distance from the source. The tephra grain size is dominated by particles finer than 1 millimeter with an almost complete absence of large grains independent of distance from the source. Comprehensive understanding of the characteristics of tephra generated in this eruption can help us to understand hazards posed by future

A New Technique For Quantifying Effusive Volcanic Activity at Tolbachik Volcano Using Multiple Remote Sensing Platforms

NASA Astrophysics Data System (ADS)

McAlpin, D. B.; Meyer, F. J.; Dehn, J.; Webley, P. W.

2016-12-01

In 1976, "The Great Tolbachik Fissure Eruption," became the largest basaltic eruption in the recorded history of the Kamchatka Peninsula. In November 2012, after thirty-six years of quiescence, Tolbachik again erupted, and continued for nine months until its end in August, 2013. Observers of the 2012-13 eruption reported a mostly effusive eruption from two main fissures, long, rapidly moving lava flows, and ash clouds of up to 6 km. Initial estimates of effusive activity reported an approximate volume of 0.52 km³ over an area of more than 35 km². In this analysis, we provide updated effusion estimates for the Tolbachik eruption, determined by thermal data acquired by the Advanced Very High Resolution Radiometer (AVHRR) satellites. Each of the four AVHRR satellites carries a broad-band, five channel sensor that acquires data in the visible and infrared portions of the electromagnetic spectrum, with each satellite completing 14 daily Earth orbits. A critical component to the volume estimates is a determination of fissure size and the area of lava flow at different times during the eruption. For this purpose, we acquired optical satellite images obtained from three orbiting platforms: the Advanced Land Imager (ALI),) aboard the Earth Observer-1 (EO-1) satellite, the Operational Land Imager (OLI) aboard Landsat 8, and the Advanced Spaceborne Thermal Emission and Reflection Radiometer (ASTER) aboard NASA's Terra satellite. From these multiple platforms, lava flow maps were prepared from repeat acquisitions over the course of the eruption. Periodic lava flow measurements clarify effusion rates as instantaneous discharge rates, mean effusion rates over time, and an overall effusion rate over the entire eruption. Given the natural limitations of effusion estimates derived from thermal data, our results are compared to effusion estimates derived by DEM differencing to evaluate accuracy. This analysis is a true multi-sensor technique that affords a method to rapidly

East Pacific rise at 21°N: the volcanic, tectonic, and hydrothermal processes of the central axis

USGS Publications Warehouse

Ballard, Richard D.; Francheteau, Jean; Juteau, Tierre; Rangan, Claude; Normark, William

1981-01-01

Photographs obtained by the ANGUS survey system at 21°N reveal many similarities to the geological processes delineated at other spreading centers and in particular those observed in the Galapagos Rift at 86°W. The region of recent volcanism is restricted to a narrow zone (Zone 1) approximately 1 km wide. This suggests that the width of the magma chamber feeding these flows is also narrow at the top. Variations in sediment cover are used to subdivide the flows within Zone 1 into three sheet-flow/pillow-flow pairs. The youngest pair appears to have erupted form a linear fissure 8 km long running parallel to the valley axis. This fissure is part of a larger en echelon pattern of eruptive fissures. Active hydrothermal vents associated with the youngest flows are situated directly above the apparent eruptive fissure. The high (350°C) temperature for some of the fluids exiting from the vents suggests a highly restricted circulation system involving, at times, little to no mixing with cold seawater. The lava terrain in the remainder of Zone 1 and bordering regions is characterized by extensive fracturing, further suggesting a narrow upper dimension to the magma chamber and also that subsurface hydrothermal deposition of massive sulfides may lead to a reduction in the mixing processes.

East Pacific Rise at 21 °N: The volcanic, tectonic, and hydrothermal processes of the central axis

USGS Publications Warehouse

Ballard, Richard D.; Francheteau, Jean; Juteau, Tierre; Rangan, Claude; Normark, William R.

1981-01-01

Photographs obtained by the ANGUS survey system at 21°N reveal many similarities to the geological processes delineated at other spreading centers and in particular those observed in the Galapagos Rift at 86°W. The region of recent volcanism is restricted to a narrow zone (Zone l) approximately l km wide. This suggests that the width of the magma chamber feeding these flows is also narrow at the top. Variations in sediment cover are used to subdivide the flows within Zone 1 into three sheet-flow/pillow-flow pairs. The youngest pair appears to have erupted form a linear fissure 8 km long running parallel to the valley axis. This fissure is part of a larger en echelon pattern of eruptive fissures. Active hydrothermal vents associated with the youngest flows are situated directly above the apparent eruptive fissure. The high (350°C) temperature for some of the fluids exiting from the vents suggests a highly restricted circulation system involving, at times, little to no mixing with cold seawater. The lava terrain in the remainder of Zone l and bordering regions is characterized by extensive fracturing, further suggesting a narrow upper dimension to the magma chamber and also that subsurface hydrothermal deposition of massive sulfides may lead to a reduction in the mixing processes.

East Pacific rise at 21°N: The volcanic, tectonic, and hydrothermal processes of the central axis

NASA Astrophysics Data System (ADS)

Ballard, Robert D.; Francheteau, Jean; Juteau, Tierre; Rangan, Claude; Normark, William

1981-09-01

Photographs obtained by the ANGUS survey system at 21°N reveal many similarities to the geological processes delineated at other spreading centers and in particular those observed in the Galapagos Rift at 86°W. The region of recent volcanism is restricted to a narrow zone (Zone 1) approximately 1 km wide. This suggests that the width of the magma chamber feeding these flows is also narrow at the top. Variations in sediment cover are used to subdivide the flows within Zone 1 into three sheet-flow/pillow-flow pairs. The youngest pair appears to have erupted form a linear fissure 8 km long running parallel to the valley axis. This fissure is part of a larger en echelon pattern of eruptive fissures. Active hydrothermal vents associated with the youngest flows are situated directly above the apparent eruptive fissure. The high (350°C) temperature for some of the fluids exiting from the vents suggests a highly restricted circulation system involving, at times, little to no mixing with cold seawater. The lava terrain in the remainder of Zone 1 and bordering regions is characterized by extensive fracturing, further suggesting a narrow upper dimension to the magma chamber and also that subsurface hydrothermal deposition of massive sulfides may lead to a reduction in the mixing processes.

Io - One of at Least Four Simultaneous Erupting Volcanic Eruptions

NASA Technical Reports Server (NTRS)

1979-01-01

This photo of an active volcanic eruption on Jupiter's satellite Io was taken 1 hour, 52 minutes after the accompanying picture, late in the evening of March 4, 1979, Pacific time. On the limb of the satellite can be seen one of at least four simultaneous volcanic eruptions -- the first such activity ever observed on another celestial body. Seen against the limb are plume-like structures rising more than 60 miles (100 kilometers) above the surface. Several eruptions have been identified with volcanic structures on the surface of Io, which have also been identified by Voyager 1's infrared instrument as being abnormally hot -- several hundred degrees warmer than surrounding terrain. The fact that several eruptions appear to be occurring at the same time suggests that Io has the most active surface in the solar system and that volcanism is going on there essentially continuously. Another characteristic of the observed volcanism is that it appears to be extremely explosive, with velocities more than 2,000 miles an hour (at least 1 kilometer per second). That is more violent than terrestrial volcanoes like Etna, Vesuvius or Krakatoa.

Microfilament-Eruption Mechanism for Solar Spicules

NASA Technical Reports Server (NTRS)

Sterling, Alphonse C.; Moore, Ronald L.

2017-01-01

Recent studies indicate that solar coronal jets result from eruption of small-scale filaments, or "minifilaments" (Sterling et al. 2015, Nature, 523, 437; Panesar et al. ApJL, 832L, 7). In many aspects, these coronal jets appear to be small-scale versions of long-recognized large-scale solar eruptions that are often accompanied by eruption of a large-scale filament and that produce solar flares and coronal mass ejections (CMEs). In coronal jets, a jet-base bright point (JBP) that is often observed to accompany the jet and that sits on the magnetic neutral line from which the minifilament erupts, corresponds to the solar flare of larger-scale eruptions that occurs at the neutral line from which the large-scale filament erupts. Large-scale eruptions are relatively uncommon (approximately 1 per day) and occur with relatively large-scale erupting filaments (approximately 10 (sup 5) kilometers long). Coronal jets are more common (approximately 100s per day), but occur from erupting minifilaments of smaller size (approximately 10 (sup 4) kilometers long). It is known that solar spicules are much more frequent (many millions per day) than coronal jets. Just as coronal jets are small-scale versions of large-scale eruptions, here we suggest that solar spicules might in turn be small-scale versions of coronal jets; we postulate that the spicules are produced by eruptions of "microfilaments" of length comparable to the width of observed spicules (approximately 300 kilometers). A plot of the estimated number of the three respective phenomena (flares/CMEs, coronal jets, and spicules) occurring on the Sun at a given time, against the average sizes of erupting filaments, minifilaments, and the putative microfilaments, results in a size distribution that can be fitted with a power-law within the estimated uncertainties. The counterparts of the flares of large-scale eruptions and the JBPs of jets might be weak, pervasive, transient brightenings observed in Hinode/CaII images, and

Generation, ascent and eruption of magma on the Moon: New insights into source depths, magma supply, intrusions and effusive/explosive eruptions (Part 2: Predicted emplacement processes and observations)

NASA Astrophysics Data System (ADS)

Head, James W.; Wilson, Lionel

2017-02-01

explosive eruption types whose manifestations are modulated by lunar environmental conditions: (1) terrestrial strombolian-style eruptions map to cinder/spatter cone-like constructs (e.g., Isis and Osiris); (2) Hawaiian-style eruptions map to broad flat pyroclastic blankets (e.g., Taurus-Littrow Apollo 17 dark mantle deposits); (3) gas-rich ultraplinian-like venting can cause Moon-wide dispersal of gas and foam droplets (e.g., many isolated glass beads in lunar soils); (4) vulcanian-like eruptions caused by solidification of magma in the dike tip, buildup of gas pressure and explosive disruption, can form dark-halo craters with mixed country rock (e.g., Alphonsus Crater floor); (5) ionian-like eruptions can be caused by artificial gas buildup in wide dikes, energetic explosive eruption and formation of a dark pyroclastic ring (e.g., Orientale dark ring); (6) multiple eruptions from many gas-rich fissures can form regional dark mantle deposits (e.g., Rima Bode, Sinus Aestuum); and (7) long duration, relatively high effusion rate eruptions accompanied by continuing pyroclastic activity cause a central thermally eroded lava pond and channel, a broader pyroclastic 'spatter' edifice, an even broader pyroclastic glass deposit and, if the eruption lasts sufficiently long, an associated inner thermally eroded vent and sinuous rille channel (e.g., Cobra Head and Aristarchus Plateau dark mantle). The asymmetric nearside-farside distribution of mare basalt deposits is most plausibly explained by crustal thickness differences; intrusion is favored on the thicker farside crust and extrusion is favored on the thinner nearside crust. Second-order effects include regional and global thermal structure (areal variations in lithospheric thickness as a function of time) and broad geochemical anomalies (the Procellarum-KREEP Terrain). Differences in mare basalt titanium content as a function of space and time are testimony to a laterally and vertically heterogeneous mantle source region. The

Mt. Spurr's 1992 eruptions

USGS Publications Warehouse

1993-01-01

On 27 June, 1992, the Crater Peak vent on the south side of Mt. Spurr awoke from 39 years of dormancy and burst into sub-plinian eruption after 10 months of elevated seismicity. Two more eruptions followed in August and September. The volcano lies 125 km west of Anchorage, Alaska's largest city and an important international hub for air travel. The Alaska Volcano Observatory (AVO) was able to warn communities and the aviation industry well in advance of these eruptions.

The Eggøyan eruption in 1732, Jan Mayen; an emerging ankaramitic surtseyjan type eruption

NASA Astrophysics Data System (ADS)

Gjerlxw, E.; Hoskuldsson, A.; Pedersen, R. B.; Thorseth, I. H.

2011-12-01

Jan Mayen is a volcanic island situated at 71°N and 8°W. The Island is build up of two main edifices, Sør Jan and Nord Jan (Beerenberg). Volcanic activity on the island is little known, and however at least 4 eruptions are documented at the island since early 18th century. An expedition to the island in summer 2011 reveals that first of these eruptions formed the tuffcone Eggøyan in 1732 AD. The Eggøyan tuffcone is situated at the north east foot of Beerenberg volcano, about 2.5 km from the coastline marked by Valberget. The tuffcone is about 1.5 km in diameter and emerges from about 35 m depth to reach the altitude of at least 217 m above sea level. Pre Eggøyan Lava flows on the sandy coast west of the edifice are covered by up to 1.6 m of ash some 3 km from the vent. These lava flows have been suggested to be formed in the 1732 eruption and the 1818 eruption of Jan Mayen. However, they are covered with the Eggøyan tephra and thus considerable older. Volcanic tephra from the Eggøyan eruption forms the uppermost tephra layer on the Eastern flanks of Beerenberg. Contemporary description of the 1732 eruption, tell of violent explosive eruption at the east side of Beerenberg observed by German whalers for 28 hours, while sailing past the island in May that year. A Dutch wailer group arriving to the island in June that year, report fine ash covering the island in such a way they sink up to mid leg into it. Our study this summer shows that the only eruption these descriptions can report to are the Eggøyan eruption, dating it precisely to the spring 1732. The eruptive products are made up of frothy glass and ol, cpx and opx crystals, which characterize the flank eruptions of Beerenberg. In this presentation we shall present first results of intense fragmentation of deep gas rich ankaramitic magma from the Jan Mayen are and its interaction with seawater in shallow coastal settings.

Intra-cone plumbing system and eruptive dynamics of small-volume basaltic volcanoes: A case study in the Calatrava Volcanic Field

NASA Astrophysics Data System (ADS)

Carracedo-Sánchez, M.; Sarrionandia, F.; Ábalos, B.; Errandonea-Martin, J.; Gil Ibarguchi, J. I.

2017-12-01

may exist and evolution through time from central conduit settings to fissure eruptions. Moreover, it is shown that intracone plumbing systems can integrate coherent and clastic dykes of variable thicknesses, which, in some cases could represent feeder dykes. Table 2. Petrographic characteristics of the coherent rocks (dykes and lava flows) from the Manoteras volcano. See Fig. 2 supplementary.

Recent eruptive history of Mount Hood, Oregon, and potential hazards from future eruptions

USGS Publications Warehouse

Crandell, Dwight Raymond

1980-01-01

Each of three major eruptive periods at Mount Hood (12,000-15,000(?), 1,500-1,800, and 200-300 years ago) produced dacite domes, pyroclastic flows, and mudflows, but virtually no pumice. Most of the fine lithic ash that mantles the slopes of the volcano and the adjacent mountains fell from ash clouds that accompanied the pyroclastic flows. Widely scattered pumice lapilli that are present at the ground surface on the south, east, and north sides of Mount Hood may have been erupted during the mid-1800's, when the last known activity of the volcano occurred. The geologically recent history of Mount Hood suggests that the most likely eruptive event in the future will be the formation of another dome, probably within the present south-facing crater. The principal hazards that could accompany dome formation include pyroclastic flows and mudflows moving from the upper slopes of the volcano down the floors of valleys. Ash clouds which accompany pyroclastic flows may deposit as much as a meter of fine ash close to their source, and as much as 20 centimeters at a distance of 11 kilometers downwind from the pyroclastic flows. Other hazards that could result from such eruptions include laterally directed explosive blasts that could propel rock fragments outward from the sides of a dome at high speed, and toxic volcanic gases. The scarcity of pumiceous ash erupted during the last 15,000 years suggests that explosive pumice eruptions are not a major hazard at Mount Hood; thus, there seems to be little danger that such an eruption will significantly affect the Portland (Oregon) metropolitan area in the near future.

Homologous prominence non-radial eruptions: A case study

NASA Astrophysics Data System (ADS)

Duchlev, P.; Koleva, K.; Madjarska, M. S.; Dechev, M.

2016-10-01

The present study provides important details on homologous eruptions of a solar prominence that occurred in active region NOAA 10904 on 2006 August 22. We report on the pre-eruptive phase of the homologous feature as well as the kinematics and the morphology of a forth from a series of prominence eruptions that is critical in defining the nature of the previous consecutive eruptions. The evolution of the overlying coronal field during homologous eruptions is discussed and a new observational criterion for homologous eruptions is provided. We find a distinctive sequence of three activation periods each of them containing pre-eruptive precursors such as a brightening and enlarging of the prominence body followed by small surge-like ejections from its southern end observed in the radio 17 GHz. We analyse a fourth eruption that clearly indicates a full reformation of the prominence after the third eruption. The fourth eruption although occurring 11 h later has an identical morphology, the same angle of propagation with respect to the radial direction, as well as similar kinematic evolution as the previous three eruptions. We find an important feature of the homologous eruptive prominence sequence that is the maximum height increase of each consecutive eruption. The present analysis establishes that all four eruptions observed in Hα are of confined type with the third eruption undergoing a thermal disappearance during its eruptive phase. We suggest that the observation of the same direction of the magnetic flux rope (MFR) ejections can be consider as an additional observational criterion for MFR homology. This observational indication for homologous eruptions is important, especially in the case of events of typical or poorly distinguishable morphology of eruptive solar phenomena.

Observations on lava, snowpack and their interactions during the 2012-13 Tolbachik eruption, Klyuchevskoy Group, Kamchatka, Russia

NASA Astrophysics Data System (ADS)

Edwards, Benjamin R.; Belousov, Alexander; Belousova, Marina; Melnikov, Dmitry

2015-12-01

Observations made during January and April 2013 show that interactions between lava flows and snowpack during the 2012-13 Tolbachik fissure eruption in Kamchatka, Russia, were controlled by different styles of emplacement and flow velocities. `A`a lava flows and sheet lava flows generally moved on top of the snowpack with few immediate signs of interaction besides localized steaming. However, lavas melted through underlying snowpack 1-4 m thick within 12 to 24 h, and melt water flowed episodically from the beneath flows. Pahoehoe lava lobes had lower velocities and locally moved beneath/within the snowpack; even there the snow melting was limited. Snowpack responses were physical, including compressional buckling and doming, and thermal, including partial and complete melting. Maximum lava temperatures were up to 1355 K (1082 °C; type K thermal probes), and maximum measured meltwater temperatures were 335 K (62.7 °C). Theoretical estimates for rates of rapid (e.g., radiative) and slower (conductive) snowmelt are consistent with field observations showing that lava advance was fast enough for `a`a and sheet flows to move on top of the snowpack. At least two styles of physical interactions between lava flows and snowpack observed at Tolbachik have not been previously reported: migration of lava flows beneath the snowpack, and localized phreatomagmatic explosions caused by snowpack failure beneath lava. The distinctive morphologies of sub-snowpack lava flows have a high preservation potential and can be used to document snowpack emplacement during eruptions.

Pre-eruptive storage conditions of the Holocene dacite erupted from Kizimen Volcano, Kamchatka

USGS Publications Warehouse

Browne, B.; Izbekov, P.; Eichelberger, J.; Churikova, T.

2010-01-01

This study describes an investigation of the pre-eruptive conditions (T, P and fO2) of dacite magma erupted during the KZI cycle (12,000-8400 years ago) of Kizimen Volcano, Kamchatka, the earliest, most voluminous and most explosive eruption cycle in the Kizimen record. Hydrothermal, water-saturated experiments on KZI dacite pumice coupled with titanomagnetite-ilmenite geothermometry calculations require that the KZI dacite existed at a temperature of 823 ?? 20??C and pressures of 125-150 MPa immediately prior to eruption. This estimate corresponds to a lithologic contact between Miocene volcaniclastic rocks and Pliocene-Pleistocene volcanic rocks located at a depth of 5-6 km beneath the Kizimen edifice, which may have facilitated the accumulation of atypically large volumes of gas-rich dacite during the KZI cycle.

The effect of Saqez (Pistacia atlantica) ointment on the treatment of nipple fissure and nipple pain in breastfeeding women

PubMed Central

As’adi, Nayereh; Kariman, Nourossadat; Mojab, Faraz; Pourhoseingholi, Mohammad Amin

2017-01-01

Background Nipple fissure is a common problem in breastfeeding women, and the main reason for the early discontinuation of breastfeeding. Objective To determine the effect of Saqez (Pistacia atlantica) ointment on the treatment of nipple fissure and nipple pain in breastfeeding women. Methods This randomized clinical trial was conducted on 100 subjects admitted to the health centers in Tehran, Iran from mid-July to mid-November 2015. The subjects were randomly divided into two equal groups of 50 for the Saqez ointment group and the control group. The subjects were divided into the two groups through random allocation in Excel. The subjects were monitored on day 1, 3 and 7. Data were analyzed in SAS using the Cumulative Logit model and in SPSS-21 using Mann-Whitney, independent-samples t-test, the Chi square and Fisher’s exact test. Results No significant differences were observed between the two groups in terms of their demographic and fertility characteristics. The Cumulative Logit model showed that high levels of nipple fissure and pain were significantly less frequent in the Saqez group compared to the control group (p<0.001). There was about 83% reduction in the severity of fissure and 85 %in the severity of pain in the Saqez group compared to the control group (p<0.001). Conclusion Saqez ointment is more effective in the treatment of nipple fissures and pain than breast milk. As this study was done for the first time, judgment about the conclusive efficacy of Saqez ointment on the nipple fissure, needs further similar studies. Trial registration The trial was registered at the Iranian Registry of Clinical Trials (http://www.irct.ir) with the Irct ID: IRCT2015080723535N1. Funding The authors received no financial support for the research, authorship, and/or publication of this article. PMID:28979728

2014 Mount Ontake eruption: characteristics of the phreatic eruption as inferred from aerial observations

NASA Astrophysics Data System (ADS)

Kaneko, Takayuki; Maeno, Fukashi; Nakada, Setsuya

2016-05-01

The sudden eruption of Mount Ontake on September 27, 2014, led to a tragedy that caused more than 60 fatalities including missing persons. In order to mitigate the potential risks posed by similar volcano-related disasters, it is vital to have a clear understanding of the activity status and progression of eruptions. Because the erupted material was largely disturbed while access was strictly prohibited for a month, we analyzed the aerial photographs taken on September 28. The results showed that there were three large vents in the bottom of the Jigokudani valley on September 28. The vent in the center was considered to have been the main vent involved in the eruption, and the vents on either side were considered to have been formed by non-explosive processes. The pyroclastic flows extended approximately 2.5 km along the valley at an average speed of 32 km/h. The absence of burned or fallen trees in this area indicated that the temperatures and destructive forces associated with the pyroclastic flow were both low. The distribution of ballistics was categorized into four zones based on the number of impact craters per unit area, and the furthest impact crater was located 950 m from the vents. Based on ballistic models, the maximum initial velocity of the ejecta was estimated to be 111 m/s. Just after the beginning of the eruption, very few ballistic ejecta had arrived at the summit, even though the eruption plume had risen above the summit, which suggested that a large amount of ballistic ejecta was expelled from the volcano several tens-of-seconds after the beginning of the eruption. This initial period was characterized by the escape of a vapor phase from the vents, which then caused the explosive eruption phase that generated large amounts of ballistic ejecta via sudden decompression of a hydrothermal reservoir.

Fine mapping and introgressing qFIS1-2, a major QTL for kernel fissure resistance in rice (Oryza sativa L.)

USDA-ARS?s Scientific Manuscript database

Rice (Oryza sativa L.) kernel fissuring increases breakage during milling and decreases the value of processed rice. This study employed molecular gene tagging methods to fine-map a fissure resistance (FR) locus in ‘Cybonnet’, a semidwarf tropical japonica cultivar, as well as transfer this trait to...

Popocatepetl Erupts

NASA Technical Reports Server (NTRS)

2002-01-01

The Popocatepetl Volcano, almost 30 miles south of Mexico City, erupted yesterday (December 18, 2000) in what authorities are calling its most spectacular eruption since 800 A.D. This morning, Popocatepetl (pronounced poh-poh-kah-TEH-peh-til) continued spewing red-hot rocks as well as a column of smoke and ash about 2.5 miles high into the atmosphere. This true-color image of the volcano was acquired today by the Sea-viewing Wide Field-of-view Sensor (SeaWiFS) flying aboard the OrbView-2 satellite. In this image, Popocatepetl's plume (greyish pixels) can be seen blowing southward, away from Mexico City. There is a large cloud bank (bright white pixels) just to the east of the volcanic plume. Although Popocatepetl has been active since 1994-when it awoke from a 70-year slumber-this most recent eruption is most concerning to the greater Mexico City region's 20 million residents. The volcano demonstrated what it can do in 800 A.D. when it belched forth enough lava to fill many of the valleys in the surrounding region. Earlier, scientists warned the citizens of Mexico that there is a dome of lava at the base of the volcano that is causing pressure to build inside. They are concerned that, if it continues to build unabated, this pressure could cause even larger eruptions in the future. Image provided by the SeaWiFS Project, NASA/Goddard Space Flight Center, and ORBIMAGE

Geochronology and Composition of the 2005-06 Volcanic Eruptions of the East Pacific Rise, 9deg 46'-56'N

NASA Astrophysics Data System (ADS)

Rubin, K. H.; Perfit, M. R.; Fornari, D. J.; Soule, S. A.; Tolstoy, M.; Waldhauser, F.

2006-12-01

Following the discovery of a likely eruption during an ocean bottom seismometer (OBS) recovery cruise (4/06, R/V Knorr), two rapid response cruises (5/06, R/V New Horizon and 6/06 R/V Atlantis) confirmed the new eruptions and observed and sampled newly emplaced sea floor to understand eruption conditions and impacts on hydrothermalism and ecology at the East Pacific Rise (EPR) Ridge2000 ISS near 9° 50'N. We report results of an ongoing effort to obtain high resolution 210Po-210Pb radiometric dates and compositions of young lava sampled on those expeditions, to understand when the eruptive activity occurred, its variation in space and time, and the nature of the magma reservoir(s) involved. The 210Po-210Pb method can produce monthly resolution ages from time series measurements of 210Po activity in volcanic glass after initially being degassed during eruption (Rubin et al., Nature, 1994). All analyses are being conducted on samples distributed throughout the flow field, which extends at least 18 km along the ridge axis from 9° 46'N to 9° 56'N, and includes a significant area of lava extrusion from an off-axis fissure ridge located ~~600m east of the ridge axis in the northern portion of the study area. Final 210Po ages must await the completion of multiple repeat analyses on each sample over ca 1 year, but important age constraints can be estimated by comparing measured (210Po/238U) activity ratio in the lavas with the known (limited) range in (210Pb/238U) in other young, but pre-2005 lava in the area. 210Po ranges by more than a factor of two among 10 samples undergoing analysis, which is greater than can be explained by small chemical variations between the lavas. This implies either that the samples are vastly different in U-series nuclide composition or differ in age by up to two 210Po half-lives (T1/2 = 138.4 days ~4 mos.). Preliminary microprobe, ICP-MS and TIMS-ID analyses indicate that the new lavas are slightly more differentiated than 1991

The in vitro effect of Antimicrobial Photodynamic Therapy on dental microcosm biofilms from partially erupted permanent molars: A pilot study.

PubMed

de Oliveira, Fabiana Sodré; Cruvinel, Thiago; Cusicanqui Méndez, Daniela Alejandra; Dionísio, Evandro José; Rios, Daniela; Machado, Maria Aparecida Andrade Moreira

2018-03-01

Antimicrobial Photodynamic Therapy (aPDT) could enhance the prevention of dental caries lesions in pits and fissures of partially erupted molars, by killing microorganisms from complex dental biofilms. This pilot study aimed to evaluate the effect of Antimicrobial Photodynamic Therapy (aPDT) on the viability of specific microorganism groups of dental microcosm biofilms from occlusal surfaces of first permanent molars in eruption. Dental microcosm biofilms grown on bovine enamel blocks, from dental plaque collected on occlusal surfaces of a partially erupted lower right first permanent molar, with McBain medium plus 1% sucrose in anaerobic condition at 37 °C for 72 h. The experiments were performed in eight groups: L-P- = no treatment (control), L18.75P- = 18.75 J/cm 2 LED, L37.5P- = 37.5 J/cm 2 LED, L75P- = 75 J/cm 2 LED, L-P+ = 200 mM TBO, L18.75P+ = 200 mM TBO + 18.75 J/cm 2 LED, L37.5P+ = 200 mM TBO + 37.5 J/cm 2 LED, and L75P+ = 200 mM TBO + 75 J/cm 2 LED. The counts of total microorganisms, total streptococci and mutans streptococci were determined on selective media agar plates by colony-forming units per mL. The log-transformed counts were analyzed by Kruskal-Wallis and post-hoc Dunn's test (P < 0.05). The counts of all microorganisms treated in the group L75P+ were statistically lower than those treated in L-P-. The aPDT promoted a significant reduction of microorganisms, with a trend of dose-dependent effect. TBO-mediated aPDT was effective in reducing the viability of specific microbial groups in dental microcosm biofilms originated from occlusal of permanent molars in eruption. Copyright © 2017 Elsevier B.V. All rights reserved.

The longevity of lava dome eruptions

NASA Astrophysics Data System (ADS)

Wolpert, Robert L.; Ogburn, Sarah E.; Calder, Eliza S.

2016-02-01

Understanding the duration of past, ongoing, and future volcanic eruptions is an important scientific goal and a key societal need. We present a new methodology for forecasting the duration of ongoing and future lava dome eruptions based on a database (DomeHaz) recently compiled by the authors. The database includes duration and composition for 177 such eruptions, with "eruption" defined as the period encompassing individual episodes of dome growth along with associated quiescent periods during which extrusion pauses but unrest continues. In a key finding, we show that probability distributions for dome eruption durations are both heavy tailed and composition dependent. We construct objective Bayesian statistical models featuring heavy-tailed Generalized Pareto distributions with composition-specific parameters to make forecasts about the durations of new and ongoing eruptions that depend on both eruption duration to date and composition. Our Bayesian predictive distributions reflect both uncertainty about model parameter values (epistemic uncertainty) and the natural variability of the geologic processes (aleatoric uncertainty). The results are illustrated by presenting likely trajectories for 14 dome-building eruptions ongoing in 2015. Full representation of the uncertainty is presented for two key eruptions, Soufriére Hills Volcano in Montserrat (10-139 years, median 35 years) and Sinabung, Indonesia (1-17 years, median 4 years). Uncertainties are high but, importantly, quantifiable. This work provides for the first time a quantitative and transferable method and rationale on which to base long-term planning decisions for lava dome-forming volcanoes, with wide potential use and transferability to forecasts of other types of eruptions and other adverse events across the geohazard spectrum.

SOLAR ERUPTION AND LOCAL MAGNETIC PARAMETERS

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lee, Jeongwoo; Chae, Jongchul; Liu, Chang

It is now a common practice to use local magnetic parameters such as magnetic decay index for explaining solar eruptions from active regions, but there can be an alternative view that the global properties of the source region should be counted as a more important factor. We discuss this issue based on Solar Dynamics Observatory observations of the three successive eruptions within 1.5 hr from the NOAA active region 11444 and the magnetic parameters calculated using the nonlinear force-free field model. Two violent eruptions occurred in the regions with relatively high magnetic twist number (0.5–1.5) and high decay index (0.9–1.1)more » at the nominal height of the filament (12″) and otherwise a mild eruption occurred, which supports the local-parameter paradigm. Our main point is that the time sequence of the eruptions did not go with these parameters. It is argued that an additional factor, in the form of stabilizing force, should operate to determine the onset of the first eruption and temporal behaviors of subsequent eruptions. As supporting evidence, we report that the heating and fast plasma flow continuing for a timescale of an hour was the direct cause for the first eruption and that the unidirectional propagation of the disturbance determined the timing of subsequent eruptions. Both of these factors are associated with the overall magnetic structure rather than local magnetic properties of the active region.« less

Petrography and petrology of the Nornahraun eruption of the Bárðarbunga volcanic system, Iceland

NASA Astrophysics Data System (ADS)

Guðfinnsson, Guðmundur H.; Halldórsson, Sæmundur Ari; Bali, Enikő; Jakobsson, Sigurður; Sverrisdóttir, Guðrún; Höskuldssson, Ármann; Riishuus, Morten S.; Þórðarson, Þorvaldur; The 2014 Nornahraun Eruption Team

2015-04-01

The on-going fissure eruption north of Dyngjujökull is becoming the largest of its kind in Iceland since the 1783-84 Laki eruption. The erupted lava is olivine tholeiite, containing up to 5% normative olivine. It is relatively macrocryst-poor, initially containing less than 1% phenocrysts by volume, increasing to over 1% as the eruption has progressed. Plagioclase is the dominant macrocryst phase but olivine and augite are also present. In most of the samples, crystallization of the groundmass is substantial, with plagioclase and augite as the key groundmass minerals and minor olivine. It features subophitic texture, typical for olivine tholeiites, where the interstitial glass contains dendritic Fe-Ti oxide. During the first two months of the eruption, magma composition has been constant, displaying uniform major and trace element composition and nearly uniform isotopic compositions (Halldórsson et al. (a), this session). The major and trace element contents, in addition to the isotope ratios of lead, are indistinguishable from basalts in the Bárðarbunga volcanic system (Halldórsson et al. (b), this session). The compositional trends are consistent with crystallization along the ol-plag-cpx cotectic. Crystallization depth estimates, based on the pressure dependence of the cotectic (Yang et al., 1996), indicate that the magma equilibrated at a minimum depth between 6-9 km, consistent with depth estimates derived from CO2-bearing fluid inclusions trapped in plagioclase phenocrysts (Bali et al., this session). The bulk of the earthquakes associated with this volcano-tectonic episode are also in this range (e.g., Sigmundsson et al., 2015). Calculations with several different magma geothermometers suggest that the temperature of the magma as it rises to the surface is about 1170-1180°C, in good agreement with on-site measurements by thermal imaging cameras. The eruption has been characterized by steady, high emission of SO2. The sulfur-rich nature of the lava is

Solar Activity and Solar Eruptions

NASA Technical Reports Server (NTRS)

Sterling, Alphonse C.

2006-01-01

Our Sun is a dynamic, ever-changing star. In general, its atmosphere displays major variation on an 11-year cycle. Throughout the cycle, the atmosphere occasionally exhibits large, sudden outbursts of energy. These "solar eruptions" manifest themselves in the form of solar flares, filament eruptions, coronal mass ejections (CMEs), and energetic particle releases. They are of high interest to scientists both because they represent fundamental processes that occur in various astrophysical context, and because, if directed toward Earth, they can disrupt Earth-based systems and satellites. Research over the last few decades has shown that the source of the eruptions is localized regions of energy-storing magnetic field on the Sun that become destabilized, leading to a release of the stored energy. Solar scientists have (probably) unraveled the basic outline of what happens in these eruptions, but many details are still not understood. In recent years we have been studying what triggers these magnetic eruptions, using ground-based and satellite-based solar observations in combination with predictions from various theoretical models. We will present an overview of solar activity and solar eruptions, give results from some of our own research, and discuss questions that remain to be explored.

Volcanic Eruptions and Climate: Outstanding Research Issues

NASA Astrophysics Data System (ADS)

Robock, Alan

2016-04-01

Large volcanic eruptions inject sulfur gases into the stratosphere, which convert to sulfate aerosols with an e-folding residence time of about one year. The radiative and chemical effects of this aerosol cloud produce responses in the climate system. Based on observations after major eruptions of the past and experiments with numerical models of the climate system, we understand much about their climatic impact, but there are also a number of unanswered questions. Volcanic eruptions produce global cooling, and are an important natural cause of interannual, interdecadal, and even centennial-scale climate change. One of the most interesting volcanic effects is the "winter warming" of Northern Hemisphere continents following major tropical eruptions. During the winter in the Northern Hemisphere following every large tropical eruption of the past century, surface air temperatures over North America, Europe, and East Asia were warmer than normal, while they were colder over Greenland and the Middle East. This pattern and the coincident atmospheric circulation correspond to the positive phase of the Arctic Oscillation. While this response is observed after recent major eruptions, most state-of-the-art climate models have trouble simulating winter warming. Why? High latitude eruptions in the Northern Hemisphere, while also producing global cooling, do not have the same impact on atmospheric dynamics. Both tropical and high latitude eruptions can weaken the Indian and African summer monsoon, and the effects can be seen in past records of flow in the Nile and Niger Rivers. Since the Mt. Pinatubo eruption in the Philippines in 1991, there have been no large eruptions that affected climate, but the cumulative effects of small eruptions over the past decade have had a small effect on global temperature trends. Some important outstanding research questions include: How much seasonal, annual, and decadal predictability is possible following a large volcanic eruption? Do

Eruptive history of the youngest Mexican Shield and Mexico's most voluminous Holocene eruption: Cerro El Metate

NASA Astrophysics Data System (ADS)

Oryaëlle Chevrel, Magdalena; Guilbaud, Marie-Noelle; Siebe, Claus

2016-04-01

Small to medium-sized shield volcanoes are an important component of many volcanic fields on Earth. The Trans-Mexican Volcanic Belt, one of the most complex and active continental arcs worldwide, displays a large number of such medium-sized volcanoes. In particular the Michoacán-Guanajuato Volcanic Field (MGVF) situated in central Mexico, is the largest monogenetic volcanic field in the world and includes more than 1000 scoria cones and about four hundred medium-sized volcanoes, also known as Mexican shields. The Mexican shields nevertheless represent nearly 70% of the total volume erupted since 1 Ma and hence played a considerable role in the formation of the MGVF. However, the source, storage, and transport as well as the physical properties (density, viscosity, volatile content, etc.) of the magmas involved in these eruptions remain poorly constrained. Here, we focus on Cerro El Metate, the youngest monogenetic andesite shield volcano of the field. New C14 dates for the eruption yield a young age (~AD 1250), which briefly precedes the initial rise of the Tarascan Empire (AD 1350-1521) in this region. This volcano has a minimum volume of ~9.2 km3 DRE, and its viscous lava flows were emplaced during a single eruption over a period of ~35 years covering an area of 103 km2. By volume, this is certainly the largest eruption during the Holocene in Mexico, and it is the largest andesitic effusive eruption known worldwide for this period. Such a large volume of lava erupted in a relatively short time had a significant impact on the environment (modification of the hydrological network, forest fires, etc.), and hence, nearby human populations probably had to migrate. Its eruptive history was reconstructed through detailed mapping, and geochemical and rheological analyses of its thick hornblende-bearing andesitic flows. Early and late flows have distinct morphologies, chemical and mineralogical compositions, and isotopic signatures which show that these lavas were fed by

Structure and Dynamics of Quiescent Prominence Eruptions

NASA Astrophysics Data System (ADS)

Su, Y.; Lu, M.; van Ballegooijen, A.

2012-05-01

We present a survey on the fine structure and dynamics of quiescent prominence eruptions observed both on the disk and at the limb. We have identified 45 quiescent prominence eruptions by looking at the SDO (Solar Dynamics Observatory)/AIA (Atmospheric Imaging Assembly) daily movies from April to June in 2011. Among these events, there are 24 symmetric eruptions (coherent loop-like eruptions) and 21 asymmetric eruptions (one footpoint lifts off) as shown by AIA and STEREO/EUVI observations. Vertical filament threads are identified in 10 out of the 45 events, while horizontal threads are observed in almost all eruptions. We find 23 events with twisting/untwisting motions. For 14 selected limb events, we carry out a detailed study of the eruption dynamics using AIA observations at 304 Å. We find that the initial heights of these erupting prominences are located around 50-110 Mm above the limb. The eruptions start from a speed of less than 5 km/s, then increase to several tens km/s in the AIA field of view. The maximum speed of these events is 50 km/s. The acceleration plots show a positive acceleration in the range of 0 to 20 m/s2. No significant difference is identified in the dynamics of the symmetric and asymmetric eruptions.

A systematic review and meta-analysis of the treatment of anal fissure.

PubMed

Nelson, R L; Manuel, D; Gumienny, C; Spencer, B; Patel, K; Schmitt, K; Castillo, D; Bravo, A; Yeboah-Sampong, A

2017-08-01

Anal fissure has a very large number of treatment options. The choice is difficult. In an effort to assist in that, choice presented here is a systematic review and meta-analysis of all published treatments for anal fissure that have been studied in randomized controlled trials. Randomized trials were sought in the Cochrane Controlled Trials Register, Medline, EMBASE and the trials registry sites clinicaltrials.gov and who/int/ictrp/search/en. Abstracts were screened, full-text studies chosen, and finally eligible studies selected and abstracted. The review was then divided into those studies that compared two or more surgical procedures and those that had at least one arm that was non-surgical. Studies were further categorized by the specific interventions and comparisons. The outcome assessed was treatment failure. Negative effects of treatment assessed were headache and anal incontinence. Risk of bias was assessed for each study, and the strength of the evidence of each comparison was assessed using the Grading of Recommendations, Assessment, Development and Evaluations (GRADE) approach. One hundred and forty-eight eligible trials were found and assessed, 31 in the surgical group and 117 in the non-surgical group. There were 14 different operations described in the surgical group and 29 different non-surgical treatments in the non-surgical group along with partial lateral internal sphincterotomy (LIS). There were 61 different comparisons. Of these, 47 were reported in 2 or fewer studies, usually with quite small patient samples. The largest single comparison was glyceryl trinitrate (GTN) versus control with 19 studies. GTN was more effective than control in sustained cure (OR 0.68; 95% CI 0.63-0.77), but the quality of evidence was very poor because of severe heterogeneity, and risk of bias due to inadequate clinical follow-up. The only comparison to have a GRADE quality of evidence of high was a subgroup analysis of LIS versus any medical therapy (OR 0.12; CI 0

A MODEL FOR MAGNETICALLY COUPLED SYMPATHETIC ERUPTIONS

DOE Office of Scientific and Technical Information (OSTI.GOV)

Toeroek, T.; Titov, V. S.; Mikic, Z.

2011-10-01

Sympathetic eruptions on the Sun have been observed for several decades, but the mechanisms by which one eruption can trigger another remain poorly understood. We present a three-dimensional MHD simulation that suggests two possible magnetic trigger mechanisms for sympathetic eruptions. We consider a configuration that contains two coronal flux ropes located within a pseudo-streamer and one rope located next to it. A sequence of eruptions is initiated by triggering the eruption of the flux rope next to the streamer. The expansion of the rope leads to two consecutive reconnection events, each of which triggers the eruption of a flux ropemore » by removing a sufficient amount of overlying flux. The simulation qualitatively reproduces important aspects of the global sympathetic event on 2010 August 1 and provides a scenario for the so-called twin filament eruptions. The suggested mechanisms are also applicable for sympathetic eruptions occurring in other magnetic configurations.« less

CME Eruption Onset Observations from EIT and SXT

NASA Technical Reports Server (NTRS)

Sterling, A. C.

2004-01-01

Why CMEs erupt is a major outstanding puzzle of solar physics. Signatures observable at the earliest stages of eruption onset may hold precious clues about the onset mechanism. We present observations in EUV from SOHO/EIT and in soft X-rays from Yohkoh/SXT of the re-eruption and eruption phases of CME expulsion, along with the eruption's magnetic setting found from SOHO/MDI magnetograms. Most of our events involve clearly-observable filament eruptions and multiple neutral lines, and we use the magnetic settings and motions of the filaments to help infer the geometry and behavior of the associated erupting magnetic fields. Pre-eruption and early-eruption signatures include a relatively slow filament rise prior to eruption, and intensity "dimmings" and brightenings, both in the immediate neighborhood of the "core" (location of greatest magnetic shear) of the erupting fields and at locations remote from the core. These signatures and their relative timings place observational constraints on eruption mechanisms; our recent work has focused on implications for the so-called "tether cutting" and "breakout" models, but the same observational constraints are applicable to any model.

The variation of magma discharge during basaltic eruptions

NASA Technical Reports Server (NTRS)

Wadge, G.

1981-01-01

The rate at which basaltic magma is discharged during many eruptions varies substantially. An individual eruption has an eruption rate, which is the volumetric rate of discharge averaged over the whole or a major part of an eruption, and an effusion rate, which is the volumetric flux rate at any given time. In many cases, the effusion rate soon reaches a maximum after a short period of waxing flow (partly because of magmatic expansion); it then falls more slowly in the later parts of the eruption. The release of elastic strain energy from stored magma and the subvolcanic reservoir during eruption can give a waning flow of this type an exponential form. A comparison of the eruption rates of eruptions of Mauna Loa, Kilauea and Etna shows that for each volcano there is a trend of decreasing effusion rate with increasing duration of eruption. It is noted that this relationship is not predicted by a simple elastic model of magma release. Two other processes are invoked to explain the eruptive histories of these volcanoes: modification of the eruptive conduits and the continued supply of magma from depth during eruption.

SYMPATHETIC FILAMENT ERUPTIONS CONNECTED BY CORONAL DIMMINGS

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jiang Yunchun; Yang Jiayan; Hong Junchao

2011-09-10

We present for the first time detailed observations of three successive, interdependent filament eruptions that occurred one by one within 5 hr from different locations beyond the range of a single active region. The first eruption was observed from an active region and was associated with a coronal mass ejection (CME), during which diffuse and complex coronal dimmings formed, largely extending to the two other filaments located in quiet-Sun regions. Then, both quiescent filaments consecutively underwent the second and third eruptions, while the nearby dimmings were persistent. Comparing the result of a derived coronal magnetic configuration, the magnetic connectivity betweenmore » the dimmings suggested that they were caused by the joint effect of simple expansion of overlying loop systems forced by the first eruption, as well as by its erupting field interacting or reconnecting with the surrounding magnetic structures. Note that the dimming process in the first eruption indicated a weakening and partial removal of an overlying magnetic field constraint on the two other filaments, and thus one can physically connect these eruptions as sympathetic. It appears that the peculiar magnetic field configuration in our event was largely favorable to the occurrence of sympathetic filament eruptions. Because coronal dimmings are frequent and common phenomena in solar eruptions, especially in CME events, it is very likely that they represent a universal agent that can link consecutive eruptions nearby with sympathetic eruptions.« less

The eruption in Holuhraun, NE Iceland 2014-2015: Real-time monitoring and influence of landscape on lava flow

NASA Astrophysics Data System (ADS)

Jónsdóttir, Ingibjörg; Höskuldsson, Ármann; Thordarson, Thor; Bartolini, Stefania; Becerril, Laura; Marti Molist, Joan; Þorvaldsson, Skúli; Björnsson, Daði; Höskuldsson, Friðrik

2016-04-01

The largest eruption in Iceland since the Laki 1783-84 event began in Holuhraun, NE Iceland, on 31 August 2014, producing a lava flow field which, by the end of the eruption on February 27th 2015, covered 84,5 km2 with volume of 1,44 km3. Throughout the event, various satellite images (NOAA AVHRR, MODIS, SUOMI NPP VIIRS, ASTER, LANDSAT7&8, EO-1 ALI & HYPERION, RADARSAT-2, SENTINEL-1, COSMO SKYMED, TERRASAR X) were analysed to monitor the development of activity, identify active flow fronts and channels, and map the lava extent in close collaboration with the on-site field group. Aerial photographs and radar images from the Icelandic Coast Guard Dash 8 aircraft supported this effort. By the end of 2015, Loftmyndir ehf had produced a detailed 3D model of the lava using aerial photographs from 2013 and 2015. The importance of carrying out real-time monitoring of a volcanic eruption is: i) to locate sites of elevated temperature that may be registering new areas of activity within the lava or opening of vents or fissures. ii) To establish and verify timing of events at the vents and within the lava. iii) To identify potential volcanic hazard that can be caused by lava movements, eruption-induced flash flooding, tephra fallout or gas pollution. iv) to provide up-to-date regional information to field groups concerning safety as well as to locate sites for sampling lava, tephra and polluted water. v) to produce quantitative information on magma discharge and lava flow advance, map the lava extent, document the flow morphology and plume/tephra dispersal. During the eruption, these efforts supported mapping of the extent of the lava every 3-4 days on average underpinning the time series of magma discharge calculations. Digitial elevation models from before and after the event, combined with the real-time data series, supports detailed analysis of how landscape affects lava flow in a flat terrain (<0,4°), and provides important input to further developing lava flow models

Review of eruptive activity at Tianchi volcano, Changbaishan, northeast China: implications for possible future eruptions

NASA Astrophysics Data System (ADS)

Wei, Haiquan; Liu, Guoming; Gill, James

2013-04-01

One of the largest explosive eruptions in the past several thousand years occurred at Tianchi volcano, also known as Changbaishan, on the China-North Korea border. This historically active polygenetic central volcano consists of three parts: a lower basaltic shield, an upper trachytic composite cone, and young comendite ash flows. The Millennium Eruption occurred between 938 and 946 ad, and was preceded by two smaller and chemically different rhyolitic pumice deposits. There has been at least one additional, small eruption in the last three centuries. From 2002 to 2005, seismicity, deformation, and the helium and hydrogen gas contents of spring waters all increased markedly, causing regional concern. We attribute this event to magma recharge or volatile exhalation or both at depth, followed by two episodes of addition of magmatic fluids into the overlying aquifer without a phreatic eruption. The estimated present magma accumulation rate is too low by itself to account for the 2002-2005 unrest. The most serious volcanic hazards are ash eruption and flows, and lahars. The available geological information and volcano monitoring data provide a baseline for comprehensive assessment of future episodes of unrest and possible eruptive activity.

Ground fissures in the area of Mavropigi Village (N. Greece): Seismotectonics or mining activity?

NASA Astrophysics Data System (ADS)

Kalogirou, Eleni; Tsapanos, Theodoros; Karakostas, Vassilios; Marinos, Vassilios; Chatzipetros, Alexandros

2014-12-01

In the beginning of July 2010, a ground fissure was observed in the field near the village of Mavropigi (Northern Greece) and specifically in its NW side. Later on (early September), a second ground fissure was perceived, close and almost parallel to the first one and very close to the limits of the lignite exploitation mine (by the Public Power Corporation, PPC). It was observed that the village of Mavropigi slides away slowly towards the PPC lignite mine. Geological, seismological, as well as geotechnical survey in the field indicated that the phenomenon is related to the coal mining exploitation in the near vicinity of the village rather than to any seismotectonic activity in the surrounding area.

Ozone depletion following future volcanic eruptions

NASA Astrophysics Data System (ADS)

Eric Klobas, J.; Wilmouth, David M.; Weisenstein, Debra K.; Anderson, James G.; Salawitch, Ross J.

2017-07-01

While explosive volcanic eruptions cause ozone loss in the current atmosphere due to an enhancement in the availability of reactive chlorine following the stratospheric injection of sulfur, future eruptions are expected to increase total column ozone as halogen loading approaches preindustrial levels. The timing of this shift in the impact of major volcanic eruptions on the thickness of the ozone layer is poorly known. Modeling four possible climate futures, we show that scenarios with the smallest increase in greenhouse gas concentrations lead to the greatest risk to ozone from heterogeneous chemical processing following future eruptions. We also show that the presence in the stratosphere of bromine from natural, very short-lived biogenic compounds is critically important for determining whether future eruptions will lead to ozone depletion. If volcanic eruptions inject hydrogen halides into the stratosphere, an effect not considered in current ozone assessments, potentially profound reductions in column ozone would result.

Arrested diatreme development: Standing Rocks East, Hopi Buttes, Navajo Nation, USA

NASA Astrophysics Data System (ADS)

Lefebvre, Nathalie S.; White, James D. L.; Kjarsgaard, Bruce A.

2016-01-01

fluidal, folded-over shapes and ropy surfaces, subordinate thermally altered wall-rock and variegated domains of lapilli tuff. SRE shows a progressive transition from fissure to diatreme, and overall evolution from more explosive to weakly explosive eruption styles recorded at the conduit-crater transition. Diatreme development was initiated by deep-quarrying explosive eruptions along a fissure to form the country rock-rich breccia. Only parts of the fissure remained active as magma feeding the highly explosive eruptions along the fissure localized into discrete point sources forming the matrix-rich lapilli tuff deposits. These superimposed deposits record the passage of multiple debris-jets and subvertical fallback from shallow cratering arising from explosions triggered by magma-water interaction at numerous, discrete sites. However, instead of continuing to build a well-formed diatreme, the system switched to weak spattering with intermittent explosive activity and near-surface dike emplacement into the unconsolidated anisotropic, pyroclastic debris of the crater floor. Dominant spatter from strombolian-style bursts accumulated on the topographically varied, evolving unstable syn-eruptive crater floor, and led to local failure and remobilization. This study demonstrates how the combination of fissure behavior and sensitivity of the shallow plumbing system to local conditions during an eruption can lead to a decrease in eruptive footprint within the diatreme structure, and an overall decrease in explosivity resulting in the arrested development of an immature diatreme.

The ten-year eruption of Kilauea Volcano

USGS Publications Warehouse

Clague, D.A.; Heliker, C.

1992-01-01

About 1 km3 of lava erupted during the first 0 years of the eruption. Lava flows have destroyed 181 houses and severed the coastal highway along the volcano's south flank, severely restricting transportation on this part of the island of Hawaii. the eruption consisted of many distinct episodes characterized by activity at different vents and by different eruptive styles. the following summarizes the first 10 years of the eruption, starting with the initial outbreak in 1983.

Eruption-induced modifications to volcanic seismicity at Ruapehu, New Zealand, and its implications for eruption forecasting

USGS Publications Warehouse

Bryan, C.J.; Sherburn, S.

2003-01-01

Broadband seismic data collected on Ruapehu volcano, New Zealand, in 1994 and 1998 show that the 1995-1996 eruptions of Ruapehu resulted in a significant change in the frequency content of tremor and volcanic earthquakes at the volcano. The pre-eruption volcanic seismicity was characterized by several independent dominant frequencies, with a 2 Hz spectral peak dominating the strongest tremor and volcanic earthquakes and higher frequencies forming the background signal. The post-eruption volcanic seismicity was dominated by a 0.8-1.4 Hz spectral peak not seen before the eruptions. The 2 Hz and higher frequency signals remained, but were subordinate to the 0.8-1.4 Hz energy. That the dominant frequencies of volcanic tremor and volcanic earthquakes were identical during the individual time periods prior to and following the 1995-1996 eruptions suggests that during each of these time periods the volcanic tremor and earthquakes were generated by the same source process. The overall change in the frequency content, which occurred during the 1995-1996 eruptions and remains as of the time of the writing of this paper, most likely resulted from changes in the volcanic plumbing system and has significant implications for forecasting and real-time assessment of future eruptive activity at Ruapehu.

[Recognizing and preventing disturbances in eruption].

PubMed

van der Linden, F P G M

2014-04-01

Disturbances in eruption and related problems are quite common in permanent dentition but rare in deciduous dentition. For the timely recognition of disturbances in eruption, knowledge of the normal development of dentition is essential. Disturbances in eruption comprise disturbances in which eruption does not occur at all, in which it is delayed or incomplete, or in which the normal direction of eruption is influenced. If identified early enough, many undesirable dental conditions can be avoided or their seriousness can be limited. A possible impacting of permanent cuspids, for example, can be avoided by extracting the deciduous cuspids at the right moment; in cases of a large overjet or the threat of a cover-bite, lip interference can be prevented.

Can tides influence volcanic eruptions?

NASA Astrophysics Data System (ADS)

Girona, T.; Huber, C.

2015-12-01

The possibility that the Moon-Sun gravitational force can affect terrestrial volcanoes and trigger eruptions is a controversial issue that has been proposed since ancient times, and that has been widely debated during the last century. The controversy arises mainly from two reasons. First, the days of initiation of eruptions are not well known for many volcanoes, and thus a robust statistical comparison with tidal cycles cannot be performed for many of them. Second, the stress changes induced by tides in the upper crust are very small (10-3 MPa) compared to the tensile strength of rocks (~ 10-1-10 MPa), and hence the mechanism by which tidal stresses might trigger eruptions is unclear. In this study, we address these issues for persistently degassing volcanoes, as they erupt frequently and thus the initiation time of a significant number of eruptions (>30) is well known in several cases (9). In particular, we find that the occurrence of eruptions within ±2 days from neap tides (first and third quarter moon) is lower than 34% (e.g., 29% for Etna, Italy; 28% for Merapi, Indonesia), which is the value expected if eruptions occur randomly with no external influence. To understand this preference for erupting far away from neap tides, we have developed a new lumped-parameter model that accounts for the deformation of magma reservoirs, a partially open conduit, and a gas layer where bubbles accumulate beneath volcanic craters before being released. We demonstrate that this system reservoir-conduit-gas layer acts as an amplifier of the tidal stresses, such that, when a volcano approaches to a critical state, the gas overpressure beneath the crater can reach up to several MPa more during a spring tide (full and new moon) than during a neap tide. This amplification mechanism can explain why active volcanoes are sensitive to the moon cycles.

Land subsidence and earth fissures in south-central and southern Arizona, USA

NASA Astrophysics Data System (ADS)

Conway, Brian D.

2016-05-01

Land subsidence due to groundwater overdraft has been an ongoing problem in south-central and southern Arizona (USA) since the 1940s. The first earth fissure attributed to excessive groundwater withdrawal was discovered in the early 1950s near Picacho. In some areas of the state, groundwater-level declines of more than 150 m have resulted in extensive land subsidence and earth fissuring. Land subsidence in excess of 5.7 m has been documented in both western metropolitan Phoenix and Eloy. The Arizona Department of Water Resources (ADWR) has been monitoring land subsidence since 2002 using interferometric synthetic aperture radar (InSAR) and since 1998 using a global navigation satellite system (GNSS). The ADWR InSAR program has identified more than 25 individual land subsidence features that cover an area of more than 7,300 km2. Using InSAR data in conjunction with groundwater-level datasets, ADWR is able to monitor land subsidence areas as well as identify areas that may require additional monitoring. One area of particular concern is the Willcox groundwater basin in southeastern Arizona, which is the focus of this paper. The area is experiencing rapid groundwater declines, as much as 32.1 m during 2005-2014 (the largest land subsidence rate in Arizona State—up to 12 cm/year), and a large number of earth fissures. The declining groundwater levels in Arizona are a challenge for both future groundwater availability and mitigating land subsidence associated with these declines. ADWR's InSAR program will continue to be a critical tool for monitoring land subsidence due to excessive groundwater withdrawal.

El Cobreloa: A geyser with two distinct eruption styles

NASA Astrophysics Data System (ADS)

Namiki, Atsuko; Muñoz-Saez, Carolina; Manga, Michael

2014-08-01

We performed field measurements at a geyser nicknamed "El Cobreloa," located in the El Tatio Geyser Field, Northern Andes, Chile. The El Cobreloa geyser has two distinct eruption styles: minor eruptions and more energetic and long-lived major eruptions. Minor eruptions splash hot water intermittently over an approximately 4 min time period. Major eruptions begin with an eruption style similar to minor eruptions, but then transition to a voluminous liquid water-dominated eruption, and finally end with energetic steam discharge that continues for approximately 1 h. We calculated eruption intervals by visual observations, acoustic measurements, and ground temperature measurements and found that each eruption style has a regular interval: 4 h and 40 min for major eruptions and ˜14 min for minor eruptions. Eruptions of El Cobreloa and geochemical measurements suggest interaction of three water sources. The geyser reservoir, connected to the surface by a conduit, is recharged by a deep, hot aquifer. More deeply derived magmatic fluids heat the reservoir. Boiling in the reservoir releases steam and hot liquid water to the overlying conduit, causing minor eruptions, and heating the water in the conduit. Eventually the water in the conduit becomes warm enough to boil, leading to a steam-dominated eruption that empties the conduit. The conduit is then recharged by a shallow, colder aquifer, and the eruption cycle begins anew. We develop a model for minor eruptions which heat the water in the conduit. El Cobreloa provides insight into how small eruptions prepare the geyser system for large eruptions.

Hybrid Pyroclastic Deposits Accumulated From The Eruptive Transitional Regime of Plinian Eruptions.

NASA Astrophysics Data System (ADS)

di Muro, Andrea; Rosi, Mauro

In the past 15 years sedimentological studies (Valentine and Giannetti, 1995; Wilson and Hildreth, 1997; Rosi et al., 2001), physical models (Neri et al., 1988; Veitch and Woods, 2000; Kaminski and Jaupart, 2001) and laboratory experiments (Carey et al., 1988) converge at defining a new eruptive regime transitional between the fully convective and the fully collapsing end -members. Buoyant columns and density currents are contemporaneously fed in the transitional dynamic regime and fall beds are intercalated with the density current deposits in the area invested by them. The sedimentological analysis of the well exposed 800yr B.P. plinian eruption of the volcano Quilotoa (Ecuador) enabled us to i) recognize a gradual evolution of the eruptive regime, ii) characterize the fall and density current deposits emplaced during the transitional regime. The eruptive activity began with at least two phreatic explosions and the effusion of a small volume lava dome. Eruptive behaviour then switched to explosive and fed a purely convective column that accumulated a reverse graded pumice fall while rising up to an height of 30 km. A small volume, diluted and slow density current (S1 current) was emplaced in the proximal SW sector just before the column reached its maximum height. Two group s of more voluminous and faster intra-plinian density currents (S2 and S3 currents) were subsequently emplaced contemporaneously with the accumulation of the lower and upper part respectively of a normal graded pumice fall bed. S2 and S3 currents were radially distributed around the crater and deposited bedded layers with facies of decreasing energy when moving away from the crater. Massive beds of small volume were emplaced only i) inside the proximal valley channel near the topography break in slope, ii) outside the valley channel in medial area where the currents impinged against relieves. A thick sequence of pyroclastic flow deposits (S4 currents) accumulated in the valley channels around

Maps showing the development of the Pu'u 'O'o-Kupaianaha flow field, June 1984-February 1987, Kilauea Volcano, Hawaii

USGS Publications Warehouse

Heliker, Christina; Ulrich, George E.; Margriter, Sandy C.; Hoffmann, John P.

2001-01-01

The Pu'u 'O'o - Kupaianaha eruption on the middle east rift zone of Kilauea began in January 1983 with intermittent activity along several fissures. By June 1983, the eruption had localized at the Pu'u 'O'o vent, and the activity settled into an increasingly regular pattern of brief eruptive episodes characterized by high lava fountains. The first 18 months of this eruption are chronicled in Wolfe and others (1988), which includes maps of the flows erupted in episodes 1-20. The maps presented here extend this series through the beginning of episode 48.

Flux Cancellation Leading to CME Filament Eruptions

NASA Technical Reports Server (NTRS)

Popescu, Roxana M.; Panesar, Navdeep K.; Sterling, Alphonse C.; Moore, Ronald L.

2016-01-01

Solar filaments are strands of relatively cool, dense plasma magnetically suspended in the lower density hotter solar corona. They trace magnetic polarity inversion lines (PILs) in the photosphere below, and are supported against gravity at heights of up to approx.100 Mm above the chromosphere by the magnetic field in and around them. This field erupts when it is rendered unstable, often by magnetic flux cancellation or emergence at or near the PIL. We have studied the evolution of photospheric magnetic flux leading to ten observed filament eruptions. Specifically, we look for gradual magnetic changes in the neighborhood of the PIL prior to and during eruption. We use Extreme Ultraviolet (EUV) images from the Atmospheric Imaging Assembly (AIA), and magnetograms from the Helioseismic and Magnetic Imager (HMI), both on board the Solar Dynamics Observatory (SDO), to study filament eruptions and their photospheric magnetic fields. We examine whether flux cancellation or/and emergence leads to filament eruptions. We find that continuous flux cancellation was present at the PIL for many hours prior to each eruption. We present two CME-producing eruptions in detail and find the following: (a) the pre-eruption filament-holding core field is highly sheared and appears in the shape of a sigmoid above the PIL; (b) at the start of the eruption the opposite arms of the sigmoid reconnect in the middle above the site of (tether-cutting) flux cancellation at the PIL; (c) the filaments first show a slow-rise, followed by a fast-rise as they erupt. We conclude that these two filament eruptions result from flux cancellation in the middle of the sheared field, and thereafter evolve in agreement with the standard model for a CME/flare filament eruption from a closed bipolar magnetic field [flux cancellation (van Ballegooijen and Martens 1989 and Moore and Roumelrotis 1992) and runaway tether-cutting (Moore et. al 2001)].

Endoscopic endonasal anatomy of superior orbital fissure and orbital apex regions: critical considerations for clinical applications.

PubMed

Dallan, Iacopo; Castelnuovo, Paolo; de Notaris, Matteo; Sellari-Franceschini, Stefano; Lenzi, Riccardo; Turri-Zanoni, Mario; Battaglia, Paolo; Prats-Galino, Alberto

2013-05-01

The superior orbital fissure is a critical three-dimensional space connecting the middle cranial fossa and the orbit. From an endoscopic viewpoint, only the medial aspect has a clinical significance. It presents a critical relationship with the lateral sellar compartment, the pterygopalatine fossa and the middle cranial fossa. The connective tissue layers and neural and vascular structures of this region are described. The role of Muller's muscle is confirmed, and the utility of the maxillary and optic strut is outlined. Muller's muscle extends for the whole length of the inferior orbital fissure, passes over the maxillary strut and enters the superior orbital fissure, representing a critical surgical landmark. Dividing the tendon between the medial and inferior rectus muscle allows the identification of the main trunk of the oculomotor nerve, and a little laterally, it is usually possible to visualize the first part of the ophthalmic artery. Based on a better knowledge of anatomy, we trust that this area could be readily addressed in clinical situations requiring an extended approach in proximity of the orbital apex.

Acneiform facial eruptions

PubMed Central

Cheung, Melody J.; Taher, Muba; Lauzon, Gilles J.

2005-01-01

OBJECTIVE To summarize clinical recognition and current management strategies for four types of acneiform facial eruptions common in young women: acne vulgaris, rosacea, folliculitis, and perioral dermatitis. QUALITY OF EVIDENCE Many randomized controlled trials (level I evidence) have studied treatments for acne vulgaris over the years. Treatment recommendations for rosacea, folliculitis, and perioral dermatitis are based predominantly on comparison and open-label studies (level II evidence) as well as expert opinion and consensus statements (level III evidence). MAIN MESSAGE Young women with acneiform facial eruptions often present in primary care. Differentiating between morphologically similar conditions is often difficult. Accurate diagnosis is important because treatment approaches are different for each disease. CONCLUSION Careful visual assessment with an appreciation for subtle morphologic differences and associated clinical factors will help with diagnosis of these common acneiform facial eruptions and lead to appropriate management. PMID:15856972

When does eruption run-up begin? Multidisciplinary insight from the 1999 eruption of Shishaldin volcano

NASA Astrophysics Data System (ADS)

Rasmussen, Daniel J.; Plank, Terry A.; Roman, Diana C.; Power, John A.; Bodnar, Robert J.; Hauri, Erik H.

2018-03-01

During the run-up to eruption, volcanoes often show geophysically detectable signs of unrest. However, there are long-standing challenges in interpreting the signals and evaluating the likelihood of eruption, especially during the early stages of volcanic unrest. Considerable insight can be gained from combined geochemical and geophysical studies. Here we take such an approach to better understand the beginning of eruption run-up, viewed through the lens of the 1999 sub-Plinian basaltic eruption of Shishaldin volcano, Alaska. The eruption is of interest due to its lack of observed deformation and its apparent long run-up time (9 months), following a deep long-period earthquake swarm. We evaluate the nature and timing of recharge by examining the composition of 138 olivine macrocrysts and 53 olivine-hosted melt inclusions and through shear-wave splitting analysis of regional earthquakes. Magma mixing is recorded in three crystal populations: a dominant population of evolved olivines (Fo60-69) that are mostly reversely zoned, an intermediate population (Fo69-76) with mixed zonation, and a small population of normally zoned more primitive olivines (Fo76-80). Mixing-to-eruption timescales are obtained through modeling of Fe-Mg interdiffusion in 78 olivines. The large number of resultant timescales provides a thorough record of mixing, demonstrating at least three mixing events: a minor event ∼11 months prior to eruption, overlapping within uncertainty with the onset of deep long-period seismicity; a major event ∼50 days before eruption, coincident with a large (M5.2) shallow earthquake; and a final event about a week prior to eruption. Shear-wave splitting analysis shows a change in the orientation of the local stress field about a month after the deep long-period swarm and around the time of the M5.2 event. Earthquake depths and vapor saturation pressures of Raman-reconstructed melt inclusions indicate that the recharge magma originated from depths of at least 20

Comparison of Galunggung1982-83 and Eyjafjalla-2010 Eruptions: definition of eruption dynamics from 3D Ash Surface Morphology

NASA Astrophysics Data System (ADS)

Aydar, E.; Höskuldsson, A.; Ersoy, O.; Gourgaud, A.

2012-04-01

We consider that all works, concepts on aviation safety, security codes, establishment of warning systems etc begin in 1982, when two commercial jumbo jets en route to Australia across Indonesia suffered loss of engine thrust from ingesting volcanic ash from the erupting Galunggung Volcano, Java, and descended more than 20,000 ft before the engines could be restarted (Casadevall, 1991). It is not the only incident of this kind but this Galunggung eruption had a pionner character attracting attention on aviation safety against volcanic eruptions in international community. As the needs for precautions on aviation safety against volcanic ash encounters began with Galunggung 1982 eruption and as we all concerned by the measures taken by ICAO due to Eyjafjallajökull-2010 eruption, we aimed to investigate this last huge airspace perturbing eruption and compare the volcanic ashes produced by those two eruptions. Volcanic ash characterization should be most important parameter to understand how the eruption concerned unrolled. Galunggung 1982-83 eruption was exceptionally long, lasting about nine months between 5 April 1982-8 January 1983). During this well known eruption, the composition of the erupted magma evolved from andesite (58% SiO2) to Mg-rich basalt (47% SiO2), while the style of the eruption changed drastically through time (Katili and Sudrdajat, 1984; Sudrajat and Tilling, 1984; Gourgaud et al., 1989 gourgaud etal 2000). Paralel to chemical changes and water consumption, eruption dynamic was also changed and occured in three eruption phases with different eruptive styles as an initial Vulcanian phase (5 April-13 May), a phreatomagmatic phase (17 May-28 October) and a Strombolian phase (3 November-8 January), have been recognized (Katili and Sudradjat,1984). We examined the surficial morphological features of proximal tephra collected from Galunggung and Eyjafjalla volcanoes. Surface texture and morphology of volcanic ash particles change according to various

The effect of Saqez (Pistacia atlantica) ointment on nipple fissure improvement in breastfeeding women during one-month follow-up

PubMed Central

As’adi, Nayereh; Kariman, Nourossadat; Mojab, Faraz; Pourhoseingholi, Mohamad Amin

2017-01-01

Objective: Painful nipple fissure is a troublesome problem for breastfeeding mothers. This study was conducted to evaluate the effect of saqez (Pistacia atlantica) ointment on the improvement of nipple fissure in breastfeeding women during one-month follow-up. Materials and Methods: This randomized controlled clinical trial was conducted on 100 eligible women who visited the selected health centers affiliated to Shahid Beheshti University of Medical Sciences, Tehran, Iran, from July 2015 to December 2015 during their postpartum period. A total of 100 subjects were randomly divided into two equal groups of 50 women grouped as saqez ointment group and breast milk group, and followed-up for one month. Both groups received face-to-face instructions on breastfeeding techniques. For severity of nipple fissure, Storr scale and to measure the intensity of pain, visual analog scale (VAS) were used. Results: The results showed that the two groups were matched in terms of demographic and obstetric characteristics. Mean of nipple fissure severity in ointment group (42.62) was lower than that of the control group (48.02), that was significantly different between the two groups (p=0.047). In addition, Mean nipple pain intensity in ointment group (40.57) was lower than that of the control group (49.81), but there was no significant difference between the two groups (p=0.056). Conclusion: The present study showed that saqez ointment was more effective than breast milk in healing and controlling nipple fissures during one-month follow-up, without resulting in any side effects. PMID:29299430

Flux Cancelation: The Key to Solar Eruptions

NASA Technical Reports Server (NTRS)

Panesar, Navdeep K.; Sterling, Alphonse; Moore, Ronald; Chakrapani, Prithi; Innes, Davina; Schmit, Don; Tiwari, Sanjiv

2017-01-01

Solar coronal jets are magnetically channeled eruptions that occur in all types of solar environments (e.g. active regions, quiet-Sun regions and coronal holes). Recent studies show that coronal jets are driven by the eruption of small-scare filaments (minifilaments). Once the eruption is underway magnetic reconnection evidently makes the jet spire and the bright emission in the jet base. However, the triggering mechanism of these eruptions and the formation mechanism of the pre-jet minifilaments are still open questions. In this talk, mainly using SDOAIA and SDOHIM data, first I will address the question: what triggers the jet-driving minifilament eruptions in different solar environments (coronal holes, quiet regions, active regions)? Then I will talk about the magnetic field evolution that produces the pre-jet minifilaments. By examining pre-jet evolutionary changes in line-of-sight HMI magnetograms while examining concurrent EUV images of coronal and transition-region emission, we find clear evidence that flux cancelation is the main process that builds pre-jet minifilaments, and is also the main process that triggers the eruptions. I will also present results from our ongoing work indicating that jet-driving minifilament eruptions are analogous to larger-scare filament eruptions that make flares and CMEs. We find that persistent flux cancellation at the neutral line of large-scale filaments often triggers their eruptions. From our observations we infer that flux cancelation is the fundamental process from the buildup and triggering of solar eruptions of all sizes.

Flux Cancelation: The Key to Solar Eruptions

NASA Technical Reports Server (NTRS)

Panesar, Navdeep K.; Sterling, Alphonse; Moore, Ronald; Chakrapani, Prithi; Innes, Davina; Schmit, Don; Tiwari, Sanjiv

2017-01-01

Solar coronal jets are magnetically channeled eruptions that occur in all types of solar environments (e.g. active regions, quiet-Sun regions and coronal holes). Recent studies show that coronal jets are driven by the eruption of small-scale filaments (minifilaments). Once the eruption is underway magnetic reconnection evidently makes the jet spire and the bright emission in the jet base. However, the triggering mechanism of these eruptions and the formation mechanism of the pre-jet minifilaments are still open questions. In this talk, mainly using SDO/AIA and SDO/HMI data, first I will address the question: what triggers the jet-driving minifilament eruptions in different solar environments (coronal holes, quiet regions, active regions)? Then I will talk about the magnetic field evolution that produces the pre-jet minifilaments. By examining pre-jet evolutionary changes in line-of-sight HMI magnetograms while examining concurrent EUV images of coronal and transition-region emission, we find clear evidence that flux cancellation is the main process that builds pre-jet minifilaments, and is also the main process that triggers the eruptions. I will also present results from our ongoing work indicating that jet-driving minifilament eruptions are analogous to larger-scale filament eruptions that make flares and CMEs. We find that persistent flux cancellation at the neutral line of large-scale filaments often triggers their eruptions. From our observations we infer that flux cancellation is the fundamental process for the buildup and triggering of solar eruptions of all sizes.

Inherited retarded eruption in the permanent dentition.

PubMed

Rasmussen, P; Kotsaki, A

1997-01-01

The term retarded eruption, may be used in cases where eruption is inhibited, causing an interruption in the coordination of tooth formation and tooth eruption. The phenomenon may be local or general, and several etiological factors for retarded eruption have been listed, comprising a lack of space, ankylosis, cysts, supernumerary teeth, hormone and vitamin deficiencies and several developmental disturbances and syndromes. The present paper describes several cases of retarded eruption where no factors other than inheritance have been evident. So far 14 cases have been evaluated, 9 boys and 5 girls. In addition several cases have been registered among parents and grandparents of the probands. Typical features are: retarded eruption, defined as more than 3 SD beyond mean eruption figures, comprises all teeth in the permanent dentition, and in 5 cases also second primary molars. The chronology of tooth formation are within normal limits. Consequently the teeth finish development still laying deeply buried in the jaws, often in aberrant positions and with curves or hooks on the roots. When the teeth finally get the "signal" for eruption, 5-15 years beyond normal eruption time, they move rather quickly into right positions, despite the long eruption paths and the hooked roots. Permanent teeth without, as well as with predecessors, are affected. Extraction of predecessors does not seem to provoke eruption. The main features in management are to take care of the primary teeth, to improve-esthetics, and offer surgery and orthodontics when needed. Analyses of pedigrees indicates that the genetic transmittance may be autosomal dominant as both sexes are affected, about half of the siblings show the trait, and the trait shows continuity through generations.

Mt Agung (Bali) Eruption Plumes

Atmospheric Science Data Center

2018-05-23

article title:  Mt Agung (Bali) Eruption Plumes     View larger image ... 2017 (left) and calculated plume heights (right)   Volcanic eruptions can generate a significant amount of atmospheric aerosols ...

Topological Analyses of Symmetric Eruptive Prominences

NASA Astrophysics Data System (ADS)

Panasenco, O.; Martin, S. F.

Erupting prominences (filaments) that we have analyzed from Hα Doppler data at Helio Research and from SOHO/EIT 304 Å, show strong coherency between their chirality, the direction of the vertical and lateral motions of the top of the prominences, and the directions of twisting of their legs. These coherent properties in erupting prominences occur in two patterns of opposite helicity; they constitute a form of dynamic chirality called the ``roll effect." Viewed from the positive network side as they erupt, many symmetrically-erupting dextral prominences develop rolling motion toward the observer along with right-hand helicity in the left leg and left-hand helicity in the right leg. Many symmetricaly-erupting sinistral prominences, also viewed from the positive network field side, have the opposite pattern: rolling motion at the top away from the observer, left-hand helical twist in the left leg, and right-hand twist in the right leg. We have analysed the motions seen in the famous movie of the ``Grand Daddy" erupting prominence and found that it has all the motions that define the roll effect. From our analyses of this and other symmetric erupting prominences, we show that the roll effect is an alternative to the popular hypothetical configuration of an eruptive prominence as a twisted flux rope or flux tube. Instead we find that a simple flat ribbon can be bent such that it reproduces nearly all of the observed forms. The flat ribbon is the most logical beginning topology because observed prominence spines already have this topology prior to eruption and an initial long magnetic ribbon with parallel, non-twisted threads, as a basic form, can be bent into many more and different geometrical forms than a flux rope.

Identifying recycled ash in basaltic eruptions

PubMed Central

D'Oriano, Claudia; Bertagnini, Antonella; Cioni, Raffaello; Pompilio, Massimo

2014-01-01

Deposits of mid-intensity basaltic explosive eruptions are characterized by the coexistence of different types of juvenile clasts, which show a large variability of external properties and texture, reflecting alternatively the effects of primary processes related to magma storage or ascent, or of syn-eruptive modifications occurred during or immediately after their ejection. If fragments fall back within the crater area before being re-ejected during the ensuing activity, they are subject to thermally- and chemically-induced alterations. These ‘recycled' clasts can be considered as cognate lithic for the eruption/explosion they derive. Their exact identification has consequences for a correct interpretation of eruption dynamics, with important implications for hazard assessment. On ash erupted during selected basaltic eruptions (at Stromboli, Etna, Vesuvius, Gaua-Vanuatu), we have identified a set of characteristics that can be associated with the occurrence of intra-crater recycling processes, based also on the comparison with results of reheating experiments performed on primary juvenile material, at variable temperature and under different redox conditions. PMID:25069064

Reduced cooling following future volcanic eruptions

NASA Astrophysics Data System (ADS)

Hopcroft, Peter O.; Kandlbauer, Jessy; Valdes, Paul J.; Sparks, R. Stephen J.

2017-11-01

Volcanic eruptions are an important influence on decadal to centennial climate variability. Large eruptions lead to the formation of a stratospheric sulphate aerosol layer which can cause short-term global cooling. This response is modulated by feedback processes in the earth system, but the influence from future warming has not been assessed before. Using earth system model simulations we find that the eruption-induced cooling is significantly weaker in the future state. This is predominantly due to an increase in planetary albedo caused by increased tropospheric aerosol loading with a contribution from associated changes in cloud properties. The increased albedo of the troposphere reduces the effective volcanic aerosol radiative forcing. Reduced sea-ice coverage and hence feedbacks also contribute over high-latitudes, and an enhanced winter warming signal emerges in the future eruption ensemble. These findings show that the eruption response is a complex function of the environmental conditions, which has implications for the role of eruptions in climate variability in the future and potentially in the past.

Structure and Dynamics of Quiescent Prominence Eruptions

NASA Astrophysics Data System (ADS)

Lu, Muzhou; Su, Y.; Adriaan van Ballegooijen, A.

2012-05-01