Science.gov

Sample records for kane springs wash

  1. Nature and origin of secondary mineral coatings on volcanic rocks of the Black Mountain, Stonewall Mountain, and Kane Springs Wash volcanic centers, southern, Nevada

    NASA Technical Reports Server (NTRS)

    Taranik, James V.; Hsu, Liang C.; Spatz, David M.; Chenevey, Michael J.

    1989-01-01

    The following subject areas are covered: (1) genetic, spectral, and LANDSAT Thematic Mapper imagery relationship between desert varnish and tertiary volcanic host rocks, southern Nevada; (2) reconnaissance geologic mapping of the Kane Springs Wash Volcanic Center, Lincoln County, Nevada, using multispectral thermal infrared imagery; (3) interregional comparisons of desert varnish; and (4) airborne scanner (GERIS) imagery of the Kane Springs Wash Volcanic Center, Lincoln County, Nevada.

  2. Nature and origin of mineral coatings on volcanic rocks of the Black Mountain, Stonewall Mountain and Kane Springs Wash volcanic centers, southern Nevada

    NASA Technical Reports Server (NTRS)

    Taranik, J. V.; Noble, D. C.; Hsu, L. C.; Hutsinpiller, A.; Spatz, D.

    1986-01-01

    Surface coatings on volcanic rock assemblages that occur at select tertiary volcanic centers in southern Nevada were investigated using LANDSAT 5 Thematic Mapper imagery. Three project sites comprise the subject of this study: the Kane Springs Wash, Black Mountain, and Stonewall Mountain volcanic centers. LANDSAT 5 TM work scenes selected for each area are outlined along with local area geology. The nature and composition of surface coatings on the rock types within the subproject areas are determined, along with the origin of the coatings and their genetic link to host rocks, geologic interpretations are related to remote sensing units discriminated on TM imagery. Image processing was done using an ESL VAX/IDIMS image processing system, field sampling, and observation. Aerial photographs were acquired to facilitate location on the ground and to aid stratigraphic differentiation.

  3. Hydrogeology of the Mammoth Spring groundwater basin and vicinity, Markagunt Plateau, Garfield, Iron, and Kane Counties, Utah

    USGS Publications Warehouse

    Spangler, Lawrence E.

    2012-01-01

    The Markagunt Plateau, in southwestern Utah, lies at an altitude of about 9,500 feet, largely within Dixie National Forest. The plateau is capped primarily by Tertiary- and Quaternary-age volcanic rocks that overlie Paleocene- to Eocene-age limestone of the Claron Formation, which forms escarpments on the west and south sides of the plateau. In the southwestern part of the plateau, an extensive area of sinkholes has formed that resulted primarily from dissolution of the underlying limestone and subsequent subsidence and (or) collapse of the basalt, producing sinkholes as large as 1,000 feet across and 100 feet deep. Karst development in the Claron Formation likely has been enhanced by high infiltration rates through the basalt. Numerous large springs discharge from the volcanic rocks and underlying limestone on the Markagunt Plateau, including Mammoth Spring, one of the largest in Utah, with discharge that ranges from less than 5 to more than 300 cubic feet per second (ft3/s). In 2007, daily mean peak discharge of Mammoth Spring was bimodal, reaching 54 and 56 ft3/s, while daily mean peak discharge of the spring in 2008 and in 2009 was 199 ft3/s and 224 ft3/s, respectively. In both years, the rise from baseflow, about 6 ft3/s, to peak flow occurred over a 4- to 5-week period. Discharge from Mammoth Spring accounted for about 54 percent of the total peak streamflow in Mammoth Creek in 2007 and 2008, and about 46 percent in 2009, and accounted for most of the total streamflow during the remainder of the year. Results of major-ion analyses for water samples collected from Mammoth and other springs on the plateau during 2006 to 2009 indicated calcium-bicarbonate type water, which contained dissolved-solids concentrations that ranged from 91 to 229 milligrams per liter. Concentrations of major ions, trace elements, and nutrients did not exceed primary or secondary drinking-water standards; however, total and fecal coliform bacteria were present in water from Mammoth and

  4. Hydrogeology of the Mammoth Spring groundwater basin and vicinity, Markagunt Plateau, Garfield, Iron, and Kane Counties, Utah

    USGS Publications Warehouse

    Spangler, Lawrence E.

    2012-01-01

    The Markagunt Plateau, in southwestern Utah, lies at an altitude of about 9,500 feet, largely within Dixie National Forest. The plateau is capped primarily by Tertiary- and Quaternary-age volcanic rocks that overlie Paleocene- to Eocene-age limestone of the Claron Formation, which forms escarpments on the west and south sides of the plateau. In the southwestern part of the plateau, an extensive area of sinkholes has formed that resulted primarily from dissolution of the underlying limestone and subsequent subsidence and (or) collapse of the basalt, producing sinkholes as large as 1,000 feet across and 100 feet deep. Karst development in the Claron Formation likely has been enhanced by high infiltration rates through the basalt. Numerous large springs discharge from the volcanic rocks and underlying limestone on the Markagunt Plateau, including Mammoth Spring, one of the largest in Utah, with discharge that ranges from less than 5 to more than 300 cubic feet per second (ft3/s). In 2007, daily mean peak discharge of Mammoth Spring was bimodal, reaching 54 and 56 ft3/s, while daily mean peak discharge of the spring in 2008 and in 2009 was 199 ft3/s and 224 ft3/s, respectively. In both years, the rise from baseflow, about 6 ft3/s, to peak flow occurred over a 4- to 5-week period. Discharge from Mammoth Spring accounted for about 54 percent of the total peak streamflow in Mammoth Creek in 2007 and 2008, and about 46 percent in 2009, and accounted for most of the total streamflow during the remainder of the year. Results of major-ion analyses for water samples collected from Mammoth and other springs on the plateau during 2006 to 2009 indicated calcium-bicarbonate type water, which contained dissolved-solids concentrations that ranged from 91 to 229 milligrams per liter. Concentrations of major ions, trace elements, and nutrients did not exceed primary or secondary drinking-water standards; however, total and fecal coliform bacteria were present in water from Mammoth and

  5. Big Spring spinedace and associated fish populations and habitat conditions in Condor Canyon, Meadow Valley Wash, Nevada

    USGS Publications Warehouse

    Jezorek, Ian G.; Connolly, Patrick J.; Munz, Carrie S.; Dixon, Chris

    2011-01-01

    Executive Summary: This project was designed to document habitat conditions and populations of native and non-native fish within the 8-kilometer Condor Canyon section of Meadow Valley Wash, Nevada, with an emphasis on Big Spring spinedace (Lepidomeda mollispinis pratensis). Other native fish present were speckled dace (Rhinichthys osculus) and desert sucker (Catostomus clarki). Big Spring spinedace were known to exist only within this drainage and were known to have been extirpated from a portion of their former habitat located downstream of Condor Canyon. Because of this extirpation and the limited distribution of Big Spring spinedace, the U.S. Fish and Wildlife Service listed this species as threatened under the Endangered Species Act in 1985. Prior to our effort, little was known about Big Spring spinedace populations or life histories and habitat associations. In 2008, personnel from the U.S. Geological Survey's Columbia River Research Laboratory began surveys of Meadow Valley Wash in Condor Canyon. Habitat surveys characterized numerous variables within 13 reaches, thermologgers were deployed at 9 locations to record water temperatures, and fish populations were surveyed at 22 individual sites. Additionally, fish were tagged with Passive Integrated Transponder (PIT) tags, which allowed movement and growth information to be collected on individual fish. The movements of tagged fish were monitored with a combination of recapture events and stationary in-stream antennas, which detected tagged fish. Meadow Valley Wash within Condor Canyon was divided by a 12-meter (m) waterfall known as Delmue Falls. About 6,100 m of stream were surveyed downstream of the falls and about 2,200 m of stream were surveyed upstream of the falls. Although about three-quarters of the surveyed stream length was downstream of Delmue Falls, the highest densities and abundance of native fish were upstream of the falls. Big Spring spinedace and desert sucker populations were highest near the

  6. Distribution and movement of Big Spring spinedace (Lepidomeda mollispinis pratensis) in Condor Canyon, Meadow Valley Wash, Nevada

    USGS Publications Warehouse

    Jezorek, Ian G.; Connolly, Patrick J.

    2013-01-01

    Big Spring spinedace (Lepidomeda mollispinis pratensis) is a cyprinid whose entire population occurs within a section of Meadow Valley Wash, Nevada. Other spinedace species have suffered population and range declines (one species is extinct). Managers, concerned about the vulnerability of Big Spring spinedace, have considered habitat restoration actions or translocation, but they have lacked data on distribution or habitat use. Our study occurred in an 8.2-km section of Meadow Valley Wash, including about 7.2 km in Condor Canyon and 0.8 km upstream of the canyon. Big Spring spinedace were present upstream of the currently listed critical habitat, including in the tributary Kill Wash. We found no Big Spring spinedace in the lower 3.3 km of Condor Canyon. We tagged Big Spring spinedace ≥70 mm fork length (range 70–103 mm) with passive integrated transponder tags during October 2008 (n = 100) and March 2009 (n = 103) to document movement. At least 47 of these individuals moved from their release location (up to 2 km). Thirty-nine individuals moved to Kill Wash or the confluence area with Meadow Valley Wash. Ninety-three percent of movement occurred in spring 2009. Fish moved both upstream and downstream. We found no movement downstream over a small waterfall at river km 7.9 and recorded only one fish that moved downstream over Delmue Falls (a 12-m drop) at river km 6.1. At the time of tagging, there was no significant difference in fork length or condition between Big Spring Spinedace that were later detected moving and those not detected moving. We found no significant difference in fork length or condition at time of tagging of Big Spring spinedace ≥70 mm fork length that were detected moving and those not detected moving. Kill Wash and its confluence area appeared important to Big Spring spinedace; connectivity with these areas may be key to species persistence. These areas may provide a habitat template for restoration or translocation. The lower 3.3 km of

  7. The nature and origin of mineral coatings on volcanic rocks of the Black Mountain, Stonewall Mountain and Kane Springs Wash volcanic centers in southern Nevada

    NASA Technical Reports Server (NTRS)

    Taranik, J. V.; Noble, D. D.; Hsu, L. C.; Hutsinpiller, A.

    1986-01-01

    Four LANDSAT thematic mapping scenes in southern Nevada were requested at two different acquisition times in order to assess the effect of vegetation on the signature of the volcanic units. The remote sensing data acquisition and analysis portion are nearly completed. The LANDSAT thematic mapping data is of good quality, and image analysis techniques are so far successful in delineating areas with distinct spectral characteristics. Spectrally distinct areas were correlated with variations in surface coating and lithologies of the volcanic rocks.

  8. Nature and origin of mineral coatings on volcanic rocks of the Black Mountain, Stonewall Mountain and Kane Springs wash volcanic centers, southern Nevada

    NASA Technical Reports Server (NTRS)

    Taranik, James V.; Noble, Donald C.; Hsu, Liang C.; Spatz, David M.

    1987-01-01

    Mineral coatings, including desert varnish on volcanic rocks of the semi-arid Basin and Range province are composted of amorphous, translucent films of Fe, Mn, Si, and Al rich compounds. Coatings are chiefly thin films that impregnate intergranularly to depths of about 0.1 to 0.3 mm, rarely deeper. Sixteen coating sections and subsurface interiors were probed by SEM; 20 samples were scanned by infrated spectrometry; 10 samples were scanned for visible-near IR spectra; inductin coupling plasma analyses were collected on 34 samples; 2 desert varnish surgaces were investigated by optical density slice imagery; a few XRD analyses were conducted in addition to the 50 reported in the last period; thin section observation continued; and imagery processing focused on classification techniques. In late May, approximately 10 field days were spent at the Stonewall and Black Mountain study sited conducting more detailed mapping and observation base on imagery results and collecting spectra with the Collins Field Spectrometer. Approximately 100 spectral analyses were collected and are currently being processed.

  9. Nature and origin of mineral coatings on volcanic rocks of the Black Mountain, Stonewall Mountain, and Kane Springs Wash volcanic centers, Southern Nevada

    NASA Technical Reports Server (NTRS)

    Taranik, James V.; Hsu, Liang C.; Spatz, David

    1988-01-01

    Comparative lab spectra and Thematic Mapper imagery investigations at 3 Tertiary calderas in southern Nevada indicate that desert varnish is absorbant relative to underlying host rocks below about 0.7 to 1.3 microns, depending on mafic affinity of the sample, but less absorbant than mafic host rocks at higher wavelengths. Desert varnish occurs chiefly as thin impregnating films. Distribution of significant varnish accumulations is sparse and localized, occurring chiefly in surface recesses. These relationships result in the longer wavelength bands and high 5/2 values over felsic units with extensive desert varnish coatings. These lithologic, petrochemical, and desert varnish controlled spectral responses lead to characteristic TM band relationships which tend to correlate with conventionally mappable geologic formations. The concept of a Rock-Varnish Index (RVI) is introduced to help distinguish rocks with a potentially detectable varnish. Felsic rocks have a high RVI, and those with extensive desert varnish behave differently, spectrally, from those without extensive varnish. The spectrally distinctive volcanic formations at Stonewall Mountain provide excellent statistical class segregation on supervised classification images. A binary decision rule flow-diagram is presented to aid TM imagery analysis over volcanic terrane in semi-arid environments.

  10. Nature and origin of mineral coatings on volcanic rocks of the Black Mountain, Stonewall Mountain, and Kane Springs, Wash volcanic centers, Southern Nevada

    NASA Technical Reports Server (NTRS)

    Taranik, James V.; Noble, Donald C.; Hsu, Liang C.; Spatz, David M.

    1987-01-01

    LANDSAT Thematic Mapper imagery was evaluated over 3 Tertiary calderas in southern Nevada. Each volcanic center derived from a highly evolved silici magmatic system represented today by well exposed diverse lithologies. Distinctive imagery contrast between some of the late ash flows and earlier units follows from the high relative reflectance in longer wavelength bands (bands 5 and 7) of the former. Enhancement techniques provide color composite images which highlight some of the units in remarkable color contrast. Inasmuch as coatings on the tuffs are incompletely developed and apparently largely dependent spectrally on rock properties independent of petrochemistry, it is felt that the distinctive imagery characteristics are more a function of primary lithologic or petrochemical properties. Any given outcrop is backdrop for a variety of cover types, of which coatings, at various stages of maturity, are one. Petrographic and X-ray diffraction analysis of the outer air-interface zone of coatings reveal they are composed chiefly of amorphous compounds, probably with varying proportions of iron and manganese. Observations support an origin for some outer (air-interface) coating constituents exogenous to the underlying host.

  11. First records of Canis dirus and Smilodon fatalis from the late Pleistocene Tule Springs local fauna, upper Las Vegas Wash, Nevada.

    PubMed

    Scott, Eric; Springer, Kathleen B

    2016-01-01

    Late Pleistocene groundwater discharge deposits (paleowetlands) in the upper Las Vegas Wash north of Las Vegas, Nevada, have yielded an abundant and diverse vertebrate fossil assemblage, the Tule Springs local fauna (TSLF). The TSLF is the largest open-site vertebrate fossil assemblage dating to the Rancholabrean North American Land Mammal Age in the southern Great Basin and Mojave Desert. Over 600 discrete body fossil localities have been recorded from the wash, including an area that now encompasses Tule Springs Fossil Beds National Monument (TUSK). Paleowetland sediments exposed in TUSK named the Las Vegas Formation span the last 250 ka, with fossiliferous sediments spanning ∼100-13 ka. The recovered fauna is dominated by remains of Camelopsand Mammuthus, and also includes relatively common remains of extinct Equusand Bisonas well as abundant vertebrate microfaunal fossils. Large carnivorans are rare, with only Puma concolor and Panthera atrox documented previously. Postcranial remains assigned to the species Canis dirus (dire wolf) and Smilodon fatalis (sabre-toothed cat) represent the first confirmed records of these species from the TSLF, as well as the first documentation of Canis dirus in Nevada and the only known occurrence of Smilodonin southern Nevada. The size of the recovered canid fossil precludes assignment to other Pleistocene species of Canis. The morphology of the felid elements differentiates them from other large predators such as Panthera, Homotherium, and Xenosmilus, and the size of the fossils prevents assignment to other species of Smilodon. The confirmed presence of S. fatalis in the TSLF is of particular interest, indicating that this species inhabited open habitats. In turn, this suggests that the presumed preference of S. fatalis for closed-habitat environments hunting requires further elucidation.

  12. First records of Canis dirus and Smilodon fatalis from the late Pleistocene Tule Springs local fauna, upper Las Vegas Wash, Nevada.

    PubMed

    Scott, Eric; Springer, Kathleen B

    2016-01-01

    Late Pleistocene groundwater discharge deposits (paleowetlands) in the upper Las Vegas Wash north of Las Vegas, Nevada, have yielded an abundant and diverse vertebrate fossil assemblage, the Tule Springs local fauna (TSLF). The TSLF is the largest open-site vertebrate fossil assemblage dating to the Rancholabrean North American Land Mammal Age in the southern Great Basin and Mojave Desert. Over 600 discrete body fossil localities have been recorded from the wash, including an area that now encompasses Tule Springs Fossil Beds National Monument (TUSK). Paleowetland sediments exposed in TUSK named the Las Vegas Formation span the last 250 ka, with fossiliferous sediments spanning ∼100-13 ka. The recovered fauna is dominated by remains of Camelopsand Mammuthus, and also includes relatively common remains of extinct Equusand Bisonas well as abundant vertebrate microfaunal fossils. Large carnivorans are rare, with only Puma concolor and Panthera atrox documented previously. Postcranial remains assigned to the species Canis dirus (dire wolf) and Smilodon fatalis (sabre-toothed cat) represent the first confirmed records of these species from the TSLF, as well as the first documentation of Canis dirus in Nevada and the only known occurrence of Smilodonin southern Nevada. The size of the recovered canid fossil precludes assignment to other Pleistocene species of Canis. The morphology of the felid elements differentiates them from other large predators such as Panthera, Homotherium, and Xenosmilus, and the size of the fossils prevents assignment to other species of Smilodon. The confirmed presence of S. fatalis in the TSLF is of particular interest, indicating that this species inhabited open habitats. In turn, this suggests that the presumed preference of S. fatalis for closed-habitat environments hunting requires further elucidation. PMID:27366649

  13. First records of Canis dirus and Smilodon fatalis from the late Pleistocene Tule Springs local fauna, upper Las Vegas Wash, Nevada

    PubMed Central

    Springer, Kathleen B.

    2016-01-01

    Late Pleistocene groundwater discharge deposits (paleowetlands) in the upper Las Vegas Wash north of Las Vegas, Nevada, have yielded an abundant and diverse vertebrate fossil assemblage, the Tule Springs local fauna (TSLF). The TSLF is the largest open-site vertebrate fossil assemblage dating to the Rancholabrean North American Land Mammal Age in the southern Great Basin and Mojave Desert. Over 600 discrete body fossil localities have been recorded from the wash, including an area that now encompasses Tule Springs Fossil Beds National Monument (TUSK). Paleowetland sediments exposed in TUSK named the Las Vegas Formation span the last 250 ka, with fossiliferous sediments spanning ∼100–13 ka. The recovered fauna is dominated by remains of Camelopsand Mammuthus, and also includes relatively common remains of extinct Equusand Bisonas well as abundant vertebrate microfaunal fossils. Large carnivorans are rare, with only Puma concolor and Panthera atrox documented previously. Postcranial remains assigned to the species Canis dirus (dire wolf) and Smilodon fatalis (sabre-toothed cat) represent the first confirmed records of these species from the TSLF, as well as the first documentation of Canis dirus in Nevada and the only known occurrence of Smilodonin southern Nevada. The size of the recovered canid fossil precludes assignment to other Pleistocene species of Canis. The morphology of the felid elements differentiates them from other large predators such as Panthera, Homotherium, and Xenosmilus, and the size of the fossils prevents assignment to other species of Smilodon. The confirmed presence of S. fatalis in the TSLF is of particular interest, indicating that this species inhabited open habitats. In turn, this suggests that the presumed preference of S. fatalis for closed-habitat environments hunting requires further elucidation. PMID:27366649

  14. Kane model parameters and stochastic spin current

    NASA Astrophysics Data System (ADS)

    Chowdhury, Debashree

    2015-11-01

    The spin current and spin conductivity is computed through thermally driven stochastic process. By evaluating the Kramers equation and with the help of k → . p → method we have studied the spin Hall scenario. Due to the thermal assistance, the Kane model parameters get modified, which consequently modulate the spin orbit coupling (SOC). This modified SOC causes the spin current to change in a finite amount.

  15. The Bosonic Kane-Mele Hubbard model

    NASA Astrophysics Data System (ADS)

    Nirwan, Rajbir; Vasic, Ivana; Petrescu, Alexandru; Le Hur, Karyn; Hofstetter, Walter

    We investigate the bosonic equivalent of the Kane-Mele model on the honeycomb lattice including spin-orbit and interaction effects. This model is a generalization of the interacting bosonic Haldane model introduced in Ref.. We also allow for an on-site conversion (coherent) term between the two species. We analyze the phase diagram using bosonic dynamical mean-field theory and analytical methods. In the Mott phase, a strong-coupling expansion is performed to investigate the magnetism and frustration effects. A connection is drawn with the quantum theory of an antiferromagnet on a triangular lattice in a magnetic field. This model can be realized in ultra-cold atom systems with current technology Replace MAR16-2015-003145.

  16. Hand Washing

    MedlinePlus

    ... dirty little secrets: Students don't wash their hands often or well. In one study, only 58% of female and 48% of male middle- and high-school students washed their hands after using the bathroom. Yuck! previous continue How ...

  17. Reproductive Responses of Common Carp Cyprinus carpio in Cages to Influent of the Las Vegas Wash in Lake Mead, Nevada, from late Winter to early Spring

    EPA Science Inventory

    To investigate the potential for contaminants in Las Vegas Wash (LW) influent to produce effects indicative of endocrine disruption in vivo, adult male and female common carp were exposed in cages for 42-48 d at four sites and two reference locations in Lake Mead.

  18. Hand washing.

    PubMed

    2016-07-01

    A surgery matron has writt en a hand hygiene promotional video rap to encourage staff, patients and visitors to wash their hands. Vicky Cartwright from University Hospitals of Leicester NHS Trust rewrote the lyrics to 1990s hit rap, Ice Ice Baby.

  19. Hand washing.

    PubMed

    2016-07-01

    A surgery matron has writt en a hand hygiene promotional video rap to encourage staff, patients and visitors to wash their hands. Vicky Cartwright from University Hospitals of Leicester NHS Trust rewrote the lyrics to 1990s hit rap, Ice Ice Baby. PMID:27380706

  20. A presentation of Kane's method for formulating equations of motion

    NASA Astrophysics Data System (ADS)

    Tran, Duc-Minh

    Kane's method for obtaining the equations of motion of dynamical systems is presented. This method, derived from Newton's second law, or d'Alembert's principle, is applicable to systems subjected to holonomic and simple nonholonomic constraints. It allows the use of a large class of variables other than generalized coordinates to describe the motion of the system. When used without Lagrange multipliers, it automatically eliminates non-working constraint forces, leading to a system of first-order differential equations of minimum dimension. It is also suitable for formulating the linearized equations of motion. Kane's method with Lagrange multipliers obviates the need to select independent variables and allows the determination of unknown constraint forces. The use of Kane's method is illustrated in an example where the equations of motion of an articulated three-body system are derived.

  1. Phase diagram of the Kane-Mele-Coulomb model

    NASA Astrophysics Data System (ADS)

    Hohenadler, M.; Parisen Toldin, F.; Herbut, I. F.; Assaad, F. F.

    2014-08-01

    We determine the phase diagram of the Kane-Mele model with a long-range Coulomb interaction using an exact quantum Monte Carlo method. Long-range interactions are expected to play a role in honeycomb materials because the vanishing density of states in the semimetallic weak-coupling phase suppresses screening. According to our results, the Kane-Mele-Coulomb model supports the same phases as the Kane-Mele-Hubbard model. The nonlocal part of the interaction promotes short-range sublattice charge fluctuations, which compete with antiferromagnetic order driven by the onsite repulsion. Consequently, the critical interaction for the magnetic transition is significantly larger than for the purely local Hubbard repulsion. Our numerical data are consistent with SU (2) Gross-Neveu universality for the semimetal to antiferromagnet transition, and with 3D XY universality for the quantum spin Hall to antiferromagnet transition.

  2. Level of Construal, Mind Wandering, and Repetitive Thought: Reply to McVay and Kane (2010)

    ERIC Educational Resources Information Center

    Watkins, Edward R.

    2010-01-01

    In this reply to the comment of McVay and Kane (2010), I consider their argument concerning how Watkins's (2008) elaborated control theory informs their perspective on the role of executive control in mind wandering. I argue that although in a number of places the elaborated control theory is consistent with the perspective of McVay and Kane that…

  3. Geochemical and Isotopic Constraints on the Source of Groundwater to Lower Kane Cave, Wyoming

    NASA Astrophysics Data System (ADS)

    Edwards, M. C.; Bennett, P. C.; Engel, A. S.

    2003-12-01

    Most karst features occur due to the dissolution of limestone by carbonic acid charged phreatic or meteoric water. However, an important subset of caves forms when anaerobic groundwater transports hydrogen sulfide into an oxidizing environment, resulting in speleogenesis via sulfuric rather than carbonic acid. The actively forming Lower Kane Cave in the Mississippian Madison Limestone of the Bighorn Basin near Lovell, Wyoming, is an accessible example of this alternative method of cave development. Located along the fold axis of the Little Sheep Mountain anticline of the Bighorn Basin, this system hosts a diverse range of microbial organisms, including acid-producing and sulfide and sulfate utilizing species, whose role in speleogenesis is currently under investigation. Water samples were collected from cave springs, nearby springs, freshwater wells and produced water from oil wells in the local area. Samples were analyzed for major and trace elements, stable isotopes and Sr isotopes by multi-collector ICP-MS, as well as dissolved gas and organic acid analyses. These data were used to examine the regional flow of groundwater to the cave and potential oil-field sources of hydrogen sulfide. The Madison Aquifer in this area is characterized by relatively fresh water, and in the cave vicinity is the source of municipal water supplies for the towns of Cowley and Greybull. The Madison water samples collected in the area are Ca-HCO3 to Mg-SO4 type, with relatively little Na and Cl. Overall the cave water chemistries are characterized as Ca-Mg-HCO3-SO4 waters; Ca = 70 ppm, Mg = 25 ppm, HCO3 = 205 ppm and SO4 = 110 ppm. However, when compared to other Madison water samples, the waters of Lower Kane Cave are slightly higher in TDS (around 400 ppm), significantly warmer (22£ C versus between 6-12£ C), and contain much higher dissolved sulfide (up to 2ppm). Additionally, Sr isotope signatures for the cave waters are significantly more radiogenic than that of other Madison

  4. Spring and Lincoln looking northwest to shops…Freight house and wood ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Spring and Lincoln looking northwest to shops…Freight house and wood shantes foreground (roundhouse visible in near distance is the second roadhouse built at aurora, 1868-1872) Photograph taken between 1874 and 1878 - Chicago, Burlington & Quincy Railroad, Roundhouse & Shops, Broadway & Spring Streets, Aurora, Kane County, IL

  5. Proper hand washing (image)

    MedlinePlus

    ... for proper hand washing include: Take off any jewelry. Hold your hands pointing down under warm water ... for proper hand washing include: Take off any jewelry. Hold your hands pointing down under warm water ...

  6. Nasal Wash Treatment

    MedlinePlus

    ... Make the nasal wash solution. Do not use tap water for the nasal wash (unless boiled or filtered ... water. You may use: Distilled water Sterilized water Tap water that has been boiled for 1 minute (at ...

  7. A "Kane's Dynamics" Model for the Active Rack Isolation System

    NASA Technical Reports Server (NTRS)

    Hampton, R. D.; Beech, G. S.; Rao, N. N. S.; Rupert, J. K.; Kim, Y. K.

    2001-01-01

    Many microgravity space science experiments require vibratory acceleration levels unachievable without active isolation. The Boeing Corporation's Active Rack Isolation System (ARIS) employs a novel combination of magnetic actuation and mechanical linkages to address these isolation requirements on the International Space Station (ISS). ARIS provides isolation at the rack (International Standard Payload Rack (ISPR)) level. Effective model-based vibration isolation requires: (1) an appropriate isolation device, (2) an adequate dynamic (i.e., mathematical) model of that isolator, and (3) a suitable, corresponding controller. ARIS provides the ISS response to the first requirement. This paper presents one response to the second, in a state space framework intended to facilitate an optimal-controls approach to the third. The authors use "Kane's Dynamics" to develop a state-space, analytical (algebraic) set of linearized equations of motion for ARIS.

  8. A "Kanes's Dynamics" Model for the Active Rack Isolation System

    NASA Technical Reports Server (NTRS)

    Hampton, R. David; Beech, Geoffrey

    1999-01-01

    Many microgravity space-science experiments require vibratory acceleration levels unachievable without active isolation. The Boeing Corporation's Active Rack Isolation System (ARIS) employs a novel combination of magnetic actuation and mechanical linkages, to address these isolation requirements on the International Space Station (ISS). ARIS provides isolation at the rack (international Standard Payload Rack, or ISPR) level. Effective model-based vibration isolation requires (1) an appropriate isolation device, (2) an adequate dynamic (i.e., mathematical) model of that isolator, and (3) a suitable, corresponding controller. ARIS provides the ISS response to the first requirement. This paper presents one response to the second, in a state-space framework intended to facilitate an optimal-controls approach to the third. The authors use "Kane's Dynamics" to develop an state-space, analytical (algebraic) set of linearized equations of motion for ARIS.

  9. Error rate of the Kane quantum computer controlled-NOT gate in the presence of dephasing

    SciTech Connect

    Fowler, Austin G.; Wellard, Cameron J.; Hollenberg, Lloyd C. L.

    2003-01-01

    We study the error rate of controlled-NOT (CNOT) operations in the Kane solid-state quantum computer architecture [B. Kane, Nature 393, 133 (1998)]. A spin Hamiltonian is used to describe the system. Dephasing is included as exponential decay of the off-diagonal elements of the system's density matrix. Using available spin-echo decay data, the CNOT error rate is estimated at {approx_equal}10{sup -3}.

  10. Wash water recovery system

    NASA Technical Reports Server (NTRS)

    Deckman, G.; Rousseau, J. (Editor)

    1973-01-01

    The Wash Water Recovery System (WWRS) is intended for use in processing shower bath water onboard a spacecraft. The WWRS utilizes flash evaporation, vapor compression, and pyrolytic reaction to process the wash water to allow recovery of potable water. Wash water flashing and foaming characteristics, are evaluated physical properties, of concentrated wash water are determined, and a long term feasibility study on the system is performed. In addition, a computer analysis of the system and a detail design of a 10 lb/hr vortex-type water vapor compressor were completed. The computer analysis also sized remaining system components on the basis of the new vortex compressor design.

  11. 78 FR 28577 - Notification of Proposed Production Activity: Whirlpool Corporation Subzone 8I; (Washing Machines...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-05-15

    ...; (Washing Machines): Clyde and Green Springs, Ohio Whirlpool Corporation (Whirlpool), operator of Subzone 8I... standard and high capacity washing machines using certain imported components. The current request would add subassemblies and other unfinished washing machine parts to the list of approved finished...

  12. 3. VIEW LOOKING NORTH AT CHINA WASH FLUME SHOWING WASH ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    3. VIEW LOOKING NORTH AT CHINA WASH FLUME SHOWING WASH - San Carlos Irrigation Project, China Wash Flume, Main (Florence-Case Grande) Canal at Station 137+00, T4S, R10E, S14, Coolidge, Pinal County, AZ

  13. Margaret E. O'Kane on healthcare accreditation. Interview by Wanda Bishop and Kevin C. Park.

    PubMed

    O'Kane, M E

    2001-01-01

    Since 1990, Margaret E. O'Kane has served as president of the National Committee for Quality Assurance (NCQA), an independent, not-for-profit organization whose mission is to improve the quality of healthcare everywhere. Under O'Kane's leadership, NCQA has developed broad support among the employer and health plan communities; today many Fortune 100 companies will do business only with NCQA-accredited health plans. About three quarters of the nation's largest employers use Health Plan Employer Data and Information Set (HEDIS) data to evaluate the plans that serve their employees. O'Kane was named Health Person of the Year in 1996 by the journal Medicine & Health. She also received a 1997 Founder's Award from the American College of Medical Quality, recognizing NCQA's efforts to improve managed care quality. In 1999, O'Kane was elected a member of the Institute of Medicine. In 2000, she received the Centers for Disease Control and Prevention (CDC) Champion of Prevention award, the agency's highest honor. CDC names a Champion of Prevention infrequently and only when an individual has made a truly notable contribution to advancing preventive healthcare. O'Kane began her career in healthcare as a respiratory therapist and has a master's degree in health administration and planning from Johns Hopkins University.

  14. Microearthquake evidence for extension across the Kane transform fault

    SciTech Connect

    Wilcock, W.S.D. ); Purdy, G.M. ); Solomon, S.C. )

    1990-09-10

    The Kane is a slow slipping (25 mm/yr), large-offset (150 km) transform delineated by a pronounced transform valley. The experiment site lies in the eastern half of the transform, 40 km west of the eastern ridge-transform intersection, in a region of marked transform-parallel topography. Hypocentral parameters were determined for 86 earthquakes. To the southeast activity may be associated with the inside corner of the ridge transform intersection, while to the north about 20 events occurred in 7-m.y.-old crust in a region of ridge-parallel bathymetry. Six focal mechanisms were obtained from P wave first motions for events within the transform valley. The best constrained solutions, for four earthquakes within the network, show normal faulting on fault planes subparallel to the trend of the transform. All the mechanisms indicate a tension axis perpendicular to the trend of the transform. These results together with a significant historical record of large earthquakes near the experiment site lead the authors to conclude that the principal transform displacement zone was inactive during the experiment and that the activity they recorded is the result of extension in the adjacent lithosphere. The observed focal mechanisms and the inference that the axis of least compressive stress is approximately perpendicular to the transform provide direct evidence that the transform fault is mechanically weak relative to the surrounding lithosphere. Potential sources of extension across the transform include thermal stress in the young oceanic lithosphere, topographic loading, a small component of plate divergence normal to the transform, and northward motion of the asthenosphere relative to the surface plate.

  15. Corrigendum: New Form of Kane's Equations of Motion for Constrained Systems

    NASA Technical Reports Server (NTRS)

    Roithmayr, Carlos M.; Bajodah, Abdulrahman H.; Hodges, Dewey H.; Chen, Ye-Hwa

    2007-01-01

    A correction to the previously published article "New Form of Kane's Equations of Motion for Constrained Systems" is presented. Misuse of the transformation matrix between time rates of change of the generalized coordinates and generalized speeds (sometimes called motion variables) resulted in a false conclusion concerning the symmetry of the generalized inertia matrix. The generalized inertia matrix (sometimes referred to as the mass matrix) is in fact symmetric and usually positive definite when one forms nonminimal Kane's equations for holonomic or simple nonholonomic systems, systems subject to nonlinear nonholonomic constraints, and holonomic or simple nonholonomic systems subject to impulsive constraints according to Refs. 1, 2, and 3, respectively. The mass matrix is of course symmetric when one forms minimal equations for holonomic or simple nonholonomic systems using Kane s method as set forth in Ref. 4.

  16. Entanglement Chern Number of the Kane-Mele Model with Ferromagnetism

    NASA Astrophysics Data System (ADS)

    Araki, Hiromu; Kariyado, Toshikaze; Fukui, Takahiro; Hatsugai, Yasuhiro

    2016-04-01

    The entanglement Chern number, the Chern number for the entanglement Hamiltonian, is used to characterize the Kane-Mele model, which is a typical model of the quantum spin Hall phase with time-reversal symmetry. We first obtain the global phase diagram of the Kane-Mele model in terms of the entanglement spin Chern number, which is defined by using a spin subspace as a subspace to be traced out in preparing the entanglement Hamiltonian. We further demonstrate the effectiveness of the entanglement Chern number without time-reversal symmetry by extending the Kane-Mele model to include the Zeeman term. The numerical results confirm that the sum of the entanglement spin Chern number is equal to the Chern number.

  17. Kane's equations and Appell's equations for high order nonholonomic variable mass systems

    NASA Astrophysics Data System (ADS)

    Ge, Zheng-Ming; Wang, Tzu-Jun

    1991-04-01

    Based on the universal D'Alembert-Lagrange's principle for variable mass systems, by means of the new method of high-ordered variation, two forms of extended equations of motion are obtained for the high-ordered nonholonomic variable mass systems of which the corresponding conventional forms of equations of motion are the special cases. Kane's equations for high-ordered nonholonomic variable mass system are derived more naturally than Kane's original derivation in which the coefficients of generalized velocities are introduced somewhat artificially. Appell's equations expressed in energy of acceleration are extended for high-ordered nonholonomic variable mass systems.

  18. Solvent wash solution

    DOEpatents

    Neace, James C.

    1986-01-01

    Process for removing diluent degradation products from a solvent extraction solution, which has been used to recover uranium and plutonium from spent nuclear fuel. A wash solution and the solvent extraction solution are combined. The wash solution contains (a) water and (b) up to about, and including, 50 volume percent of at least one-polar water-miscible organic solvent based on the total volume of the water and the highly-polar organic solvent. The wash solution also preferably contains at least one inorganic salt. The diluent degradation products dissolve in the highly-polar organic solvent and the organic solvent extraction solvent do not dissolve in the highly-polar organic solvent. The highly-polar organic solvent and the extraction solvent are separated.

  19. Solvent wash solution

    DOEpatents

    Neace, J.C.

    1984-03-13

    A process is claimed for removing diluent degradation products from a solvent extraction solution, which has been used to recover uranium and plutonium from spent nuclear fuel. A wash solution and the solvent extraction solution are combined. The wash solution contains (a) water and (b) up to about, and including, 50 vol % of at least one-polar water-miscible organic solvent based on the total volume of the water and the highly-polar organic solvent. The wash solution also preferably contains at least one inorganic salt. The diluent degradation products dissolve in the highly-polar organic solvent and the organic solvent extraction solvent do not dissolve in the highly-polar organic solvent. The highly-polar organic solvent and the extraction solvent are separated.

  20. Advanced Technology Tech Prep Partnership for Northern Kane Regional Delivery System. Final Report.

    ERIC Educational Resources Information Center

    Elgin Community Coll., IL.

    A 1-year project was undertaken to continue implementation, evaluation, and revision of a model advanced technology partnership between Elgin Community College (ECC) and the Northern Kane Regional Delivery System in Illinois. The model program, which originally included three high schools, was expanded to include five additional high schools in…

  1. 75 FR 36149 - Union Pacific Railroad Company-Abandonment Exemption-in Kane County, IL.

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-06-24

    ....30, near St. Charles, in Kane County, Ill. The line traverses United States Postal Service Zip Code... salvage of the line, the line may be suitable for other public use, including interim trail use. Any..., Office of Proceedings. Jeffrey Herzig, Clearance Clerk. BILLING CODE 4915-01-P...

  2. Soil washing treatability study

    SciTech Connect

    Krstich, M.

    1995-12-01

    Soil washing was identified as a viable treatment process option for remediating soil at the FEMP Environmental Management Project (FEMP). Little information relative to the specific application and potential effectiveness of the soil washing process exists that applies to the types of soil at the FEMP. To properly evaluate this process option in conjunction with the ongoing FEMP Remedial Investigation/Feasibility Study (RI/FS), a treatability testing program was necessary to provide a foundation for a detailed technical evaluation of the viability of the process. In August 1991, efforts were initiated to develop a work plan and experimental design for investigating the effectiveness of soil washing on FEMP soil. In August 1992, the final Treatability Study Work Plan for Operable Unit 5: Soil Washing (DOE 1992) was issued. This document shall be referenced throughout the remainder of this report as the Treatability Study Work Plan (TSWP). The purpose of this treatability study was to generate data to support initial screening and the detailed analysis of alternatives for the Operable Unit 5 FS.

  3. Wash Your Hands

    MedlinePlus

    ... do if you don't have soap and clean, running water? Washing hands with soap and water is the ... specific questions. More Information CDC's Handwashing Work Handwashing: Clean Hands Save Lives Hand Hygiene in Healthcare Settings Water-related Hygiene Hand Hygiene to Help Prevent Flu ...

  4. Domestic wash water reclamation

    NASA Technical Reports Server (NTRS)

    Hall, J. B., Jr.; Batten, C. E.; Wilkins, J. R.

    1974-01-01

    System consists of filtration unit, reverse-osmosis module, tanks, pumps, plumbing, and various gauges, meters, and valves. After water is used in washing machine or shower, it is collected in holding tank. Water is pumped through series of five particulate filters. Pressure tank supplies processed water to commode water closet.

  5. Regional and local correlations of feldspar geochemistry of the Peach Spring Tuff, Alvord Mountain, California

    USGS Publications Warehouse

    Buesch, David C.

    2016-01-01

    The chemical composition of feldspar grains in an ignimbrite from the Spanish Canyon Formation in the Alvord Mountain area, California, have been used to confirm similarities in three measured sections locally, and they are similar to exposures of the Peach Spring Tuff (PST) regionally. Feldspar grains were identified on the basis of texture (zoning, as mantled feldspars, or in crystal clusters), whether the grains were attached to glass or were in pumice clasts, or were simply crystal fragments with no textural context. Chemistry was determined by electron microprobe analysis, and each analysis is calculated in terms of the percent endmember and plotted on orthoclase (Or) versus anorthite (An) plots. In general, the PST has sanidine and plagioclase compositions that are consistent with having formed in high-silica rhyolite and trachyte within a zoned magma chamber. Feldspars from the PST in Spanish Canyon area cluster along the rhyolitic trend with no grains along the trachytic trend. Similar clustering of feldspars along the rhyolitic trend with no grains along the trachytic trend also occur in the PST from Granite Spring and Providence Mountains to the east of the Alvord Mountain area, and the ranges in compositions are also similar in these locations. In contrast, the PST in the Kane Wash area of the Newberry Mountains has feldspars only from the rhyolitic trend in the basal deposits, but some grains from the trachytic trend are in the upper part of the deposit, and the range in compositions are greater than in the Spanish Canyon area. The variations in vertical compositional zoning and compositional range in these different deposits suggests there were probably different flow paths (or timing of the delivery) during the eruption and runout of the pyroclastic flow(s) generated from the climactic eruption of the PST magma chamber.

  6. Washing Out the Competition

    NASA Technical Reports Server (NTRS)

    2001-01-01

    AJT Associates, Inc. (AJT) worked with NASA to develop a revolutionary ozone-based laundry system. AJT's TecH2Ozone(R) wash system presents its customers with an energy-efficient, cost-effective, and environmentally safe way to perform commercial laundering. TecH2Ozone significantly reduces the amount of water and chemical used as compared to traditional commercial laundry systems. This reduction has resulted in lower cost and shorter wash cycles. And due to the reduced use of chemicals, a significant portion of the rinse water is recycled back into the system for reuse. TecH2Ozone customers, such as hotels and other large commercial laundry facilities, have felt the benefits of this equipment. Because of the reduced cycle times, fewer washers are needed and there is a notable increase in the cleanliness of the laundry. The reduction in chemical residues is a boon to customers with allergies and those prone to skin irritation from chemicals retained in regular laundry. AJT Associates, Inc. (AJT) worked with NASA to develop a revolutionary ozone-based laundry system. AJT's TecH2Ozone(R) wash system presents its customers with an energy-efficient, cost-effective, and environmentally safe way to perform commercial laundering.

  7. Correlation of the Miocene Peach Spring Tuff with the geomagnetic polarity time scale and new constraints on tectonic rotations in the Mojave Desert, California

    USGS Publications Warehouse

    Hillhouse, John W.; Miller, David M.; Turrin, Brent D.

    2010-01-01

    We report new paleomagnetic results and 40Ar/39Ar ages from the Peach Spring Tuff (PST), a key marker bed that occurs in the desert region between Barstow, California, and Peach Springs, Arizona. The 40Ar/39Ar ages were determined using individual hand-picked sanidine crystals from ash-flow specimens used in previous paleomagnetic studies at eight sites correlated by mineralogy, stratigraphic position, and magnetic inclination. Site-mean ages, which range from 18.43 Ma to 18.78 Ma with analytical precision (1 s.d.) typically 0.04 Ma, were obtained from areas near Fort Rock, AZ; McCullough Mts, NV; Cima Dome, Parker Dam, Danby, Ludlow, Kane Wash, and Stoddard Wash, CA. The regional mean age determination is 18.71 ± 0.13 Ma, after the data were selected for sanidine crystals that yielded greater than 90% radiogenic argon (N = 40). This age determination is compatible with previous 40Ar/39Ar dating of the PST after taking various neutron-flux monitor calibrations into account. We report paleomagnetic results from eight new sites that bear on reconstructions of the Miocene basins associated with the Hector Formation, Barstow Formation, and similar fine-grained sedimentary deposits in the Barstow region. Key findings of the new paleomagnetic study pertain to age control of the Hector Formation and clockwise rotation of the Northeast Mojave Domain. Our study of a rhyolitic ash flow at Baxter Wash, northern Cady Mountains, confirms the correlation of the PST within the Hector Formation and prompts reinterpretation of the previously determined magnetostratigraphy. Our model correlates the PST to the normal-polarity zone just below the C6–C5E boundary (18.748 Ma) of the astronomically tuned Geomagnetic Polarity Time Scale. After emplacement of the Peach Spring Tuff at Alvord Mountain and the Cady Mountains, the southern part of the Northeast Mojave Domain (between Cady and Coyote Lake faults) underwent clockwise rotation of 30°–55°. Clockwise rotations increase with

  8. Implementation of Kane's Method for a Spacecraft Composed of Multiple Rigid Bodies

    NASA Technical Reports Server (NTRS)

    Stoneking, Eric T.

    2013-01-01

    Equations of motion are derived for a general spacecraft composed of rigid bodies connected via rotary (spherical or gimballed) joints in a tree topology. Several supporting concepts are developed in depth. Basis dyads aid in the transition from basis-free vector equations to component-wise equations. Joint partials allow abstraction of 1-DOF, 2-DOF, 3-DOF gimballed and spherical rotational joints to a common notation. The basic building block consisting of an "inner" body and an "outer" body connected by a joint enables efficient organization of arbitrary tree structures. Kane's equation is recast in a form which facilitates systematic assembly of large systems of equations, and exposes a relationship of Kane's equation to Newton and Euler's equations which is obscured by the usual presentation. The resulting system of dynamic equations is of minimum dimension, and is suitable for numerical solution by computer. Implementation is ·discussed, and illustrative simulation results are presented.

  9. a Numerical Comparison of Langrange and Kane's Methods of AN Arm Segment

    NASA Astrophysics Data System (ADS)

    Rambely, Azmin Sham; Halim, Norhafiza Ab.; Ahmad, Rokiah Rozita

    A 2-D model of a two-link kinematic chain is developed using two dynamics equations of motion, namely Kane's and Lagrange Methods. The dynamics equations are reduced to first order differential equation and solved using modified Euler and fourth order Runge Kutta to approximate the shoulder and elbow joint angles during a smash performance in badminton. Results showed that Runge-Kutta produced a better and exact approximation than that of modified Euler and both dynamic equations produced better absolute errors.

  10. Magneto-Optical Signature of Massless Kane Electrons in Cd3 As2

    NASA Astrophysics Data System (ADS)

    Akrap, A.; Hakl, M.; Tchoumakov, S.; Crassee, I.; Kuba, J.; Goerbig, M. O.; Homes, C. C.; Caha, O.; Novák, J.; Teppe, F.; Desrat, W.; Koohpayeh, S.; Wu, L.; Armitage, N. P.; Nateprov, A.; Arushanov, E.; Gibson, Q. D.; Cava, R. J.; van der Marel, D.; Piot, B. A.; Faugeras, C.; Martinez, G.; Potemski, M.; Orlita, M.

    2016-09-01

    We report on optical reflectivity experiments performed on Cd3 As2 over a broad range of photon energies and magnetic fields. The observed response clearly indicates the presence of 3D massless charge carriers. The specific cyclotron resonance absorption in the quantum limit implies that we are probing massless Kane electrons rather than symmetry-protected 3D Dirac particles. The latter may appear at a smaller energy scale and are not directly observed in our infrared experiments.

  11. Temperature-driven massless Kane fermions in HgCdTe crystals

    NASA Astrophysics Data System (ADS)

    Teppe, F.; Marcinkiewicz, M.; Krishtopenko, S. S.; Ruffenach, S.; Consejo, C.; Kadykov, A. M.; Desrat, W.; But, D.; Knap, W.; Ludwig, J.; Moon, S.; Smirnov, D.; Orlita, M.; Jiang, Z.; Morozov, S. V.; Gavrilenko, V. I.; Mikhailov, N. N.; Dvoretskii, S. A.

    2016-08-01

    It has recently been shown that electronic states in bulk gapless HgCdTe offer another realization of pseudo-relativistic three-dimensional particles in condensed matter systems. These single valley relativistic states, massless Kane fermions, cannot be described by any other relativistic particles. Furthermore, the HgCdTe band structure can be continuously tailored by modifying cadmium content or temperature. At critical concentration or temperature, the bandgap collapses as the system undergoes a semimetal-to-semiconductor topological phase transition between the inverted and normal alignments. Here, using far-infrared magneto-spectroscopy we explore the continuous evolution of band structure of bulk HgCdTe as temperature is tuned across the topological phase transition. We demonstrate that the rest mass of Kane fermions changes sign at critical temperature, whereas their velocity remains constant. The velocity universal value of (1.07+/-0.05) × 106 m s-1 remains valid in a broad range of temperatures and Cd concentrations, indicating a striking universality of the pseudo-relativistic description of the Kane fermions in HgCdTe.

  12. Temperature-driven massless Kane fermions in HgCdTe crystals

    PubMed Central

    Teppe, F.; Marcinkiewicz, M.; Krishtopenko, S. S.; Ruffenach, S.; Consejo, C.; Kadykov, A. M.; Desrat, W.; But, D.; Knap, W.; Ludwig, J.; Moon, S.; Smirnov, D.; Orlita, M.; Jiang, Z.; Morozov, S. V.; Gavrilenko, V.I.; Mikhailov, N. N.; Dvoretskii, S. A.

    2016-01-01

    It has recently been shown that electronic states in bulk gapless HgCdTe offer another realization of pseudo-relativistic three-dimensional particles in condensed matter systems. These single valley relativistic states, massless Kane fermions, cannot be described by any other relativistic particles. Furthermore, the HgCdTe band structure can be continuously tailored by modifying cadmium content or temperature. At critical concentration or temperature, the bandgap collapses as the system undergoes a semimetal-to-semiconductor topological phase transition between the inverted and normal alignments. Here, using far-infrared magneto-spectroscopy we explore the continuous evolution of band structure of bulk HgCdTe as temperature is tuned across the topological phase transition. We demonstrate that the rest mass of Kane fermions changes sign at critical temperature, whereas their velocity remains constant. The velocity universal value of (1.07±0.05) × 106 m s−1 remains valid in a broad range of temperatures and Cd concentrations, indicating a striking universality of the pseudo-relativistic description of the Kane fermions in HgCdTe. PMID:27573209

  13. Temperature-driven massless Kane fermions in HgCdTe crystals.

    PubMed

    Teppe, F; Marcinkiewicz, M; Krishtopenko, S S; Ruffenach, S; Consejo, C; Kadykov, A M; Desrat, W; But, D; Knap, W; Ludwig, J; Moon, S; Smirnov, D; Orlita, M; Jiang, Z; Morozov, S V; Gavrilenko, V I; Mikhailov, N N; Dvoretskii, S A

    2016-08-30

    It has recently been shown that electronic states in bulk gapless HgCdTe offer another realization of pseudo-relativistic three-dimensional particles in condensed matter systems. These single valley relativistic states, massless Kane fermions, cannot be described by any other relativistic particles. Furthermore, the HgCdTe band structure can be continuously tailored by modifying cadmium content or temperature. At critical concentration or temperature, the bandgap collapses as the system undergoes a semimetal-to-semiconductor topological phase transition between the inverted and normal alignments. Here, using far-infrared magneto-spectroscopy we explore the continuous evolution of band structure of bulk HgCdTe as temperature is tuned across the topological phase transition. We demonstrate that the rest mass of Kane fermions changes sign at critical temperature, whereas their velocity remains constant. The velocity universal value of (1.07±0.05) × 10(6) m s(-1) remains valid in a broad range of temperatures and Cd concentrations, indicating a striking universality of the pseudo-relativistic description of the Kane fermions in HgCdTe.

  14. Temperature-driven massless Kane fermions in HgCdTe crystals.

    PubMed

    Teppe, F; Marcinkiewicz, M; Krishtopenko, S S; Ruffenach, S; Consejo, C; Kadykov, A M; Desrat, W; But, D; Knap, W; Ludwig, J; Moon, S; Smirnov, D; Orlita, M; Jiang, Z; Morozov, S V; Gavrilenko, V I; Mikhailov, N N; Dvoretskii, S A

    2016-01-01

    It has recently been shown that electronic states in bulk gapless HgCdTe offer another realization of pseudo-relativistic three-dimensional particles in condensed matter systems. These single valley relativistic states, massless Kane fermions, cannot be described by any other relativistic particles. Furthermore, the HgCdTe band structure can be continuously tailored by modifying cadmium content or temperature. At critical concentration or temperature, the bandgap collapses as the system undergoes a semimetal-to-semiconductor topological phase transition between the inverted and normal alignments. Here, using far-infrared magneto-spectroscopy we explore the continuous evolution of band structure of bulk HgCdTe as temperature is tuned across the topological phase transition. We demonstrate that the rest mass of Kane fermions changes sign at critical temperature, whereas their velocity remains constant. The velocity universal value of (1.07±0.05) × 10(6) m s(-1) remains valid in a broad range of temperatures and Cd concentrations, indicating a striking universality of the pseudo-relativistic description of the Kane fermions in HgCdTe. PMID:27573209

  15. Soil washing of fluorine contaminated soil using various washing solutions.

    PubMed

    Moon, Deok Hyun; Jo, Raehyun; Koutsospyros, Agamemnon; Cheong, Kyung Hoon; Park, Jeong-Hun

    2015-03-01

    Bench-scale soil washing experiments were conducted to remove fluoride from contaminated soils. Five washing solutions including hydrochloric acid (HCl), nitric acid (HNO3), sodium hydroxide (NaOH), sulfuric acid (H2SO4) and tartaric acid (C4H6O6) were tested. The concentration of the washing solutions used ranged from 0.1 to 3 M with a liquid to solid ratio of 10. The soil washing results showed that the most effective washing solution for the removal of fluoride from contaminated soils was HCl. The highest fluoride removal results of approximately 97 % from the contaminated soil were obtained using 3 M HCl. The fluoride removal efficiency of the washing solution increases in the following order: C4H6O6 < NaOH < H2SO4 < HNO3 < HCl.

  16. Mineral resources of the Scorpion Wilderness study area, Garfield and Kane counties, Utah

    SciTech Connect

    Bartsch-Winkler, S.; Jones, J.L.; Kilburn, J.E.; Cady, J.W.; Duval, J.S.; Cook, K.L. ); Lane, M.E.; Corbetta, P.A. )

    1989-01-01

    This paper reports on the Scorpion Wilderness Study Area which covers 14,978 acres in south- central Utah in Garfield and Kane counties. No mining claims or oil and gas leases or lease applications extend inside this study-area boundary. Demonstrated subeconomic resources of less than 30,000 tons of gypsum are in this study area. The mineral resource potential is low for undiscovered gypsum in the Carmel Formation, for undiscovered uranium in the Chinle Formation in the subsurface, and for undiscovered metals other than uranium. The energy resource potential is low for geothermal resources and is moderate for oil, gas, and carbon dioxide.

  17. Fast nonadiabatic two-qubit gates for the Kane quantum computer

    SciTech Connect

    Hill, Charles D.; Goan, Hsi-Sheng

    2003-07-01

    In this paper, we apply the canonical decomposition of two-qubit unitaries to find pulse schemes to control the proposed Kane quantum computer. We explicitly find pulse sequences for the controlled-NOT, swap, square root of swap, and controlled Z rotations. We analyze the speed and fidelity of these gates, both of which compare favorably to existing schemes. The pulse sequences presented in this paper are theoretically faster, with higher fidelity, and simpler. Any two-qubit gate may be easily found and implemented using similar pulse sequences. Numerical simulation is used to verify the accuracy of each pulse scheme.

  18. Gates for the Kane quantum computer in the presence of dephasing

    SciTech Connect

    Hill, Charles D.; Goan Hsisheng

    2004-08-01

    In this paper we investigate the effect of dephasing on proposed quantum gates for the solid-state Kane quantum computing architecture. Using a simple model of the decoherence, we find that the typical error in a controlled-NOT gate is 8.3x10{sup -5}. We also compute the fidelities of Z, X, swap, and controlled Z operations under a variety of dephasing rates. We show that these numerical results are comparable with the error threshold required for fault tolerant quantum computation.

  19. Sizeable Kane-Mele-like spin orbit coupling in graphene decorated with iridium clusters

    NASA Astrophysics Data System (ADS)

    Qin, Yuyuan; Wang, Siqi; Wang, Rui; Bu, Haijun; Wang, Xuefeng; Wang, Xinran; Song, Fengqi; Wang, Baigeng; Wang, Guanghou

    2016-05-01

    The spin-orbit coupling strength of graphene can be enhanced by depositing iridium nanoclusters. Weak localization is intensely suppressed near zero fields after the cluster deposition, rather than changing to weak anti-localization. Fitting the magnetoresistance gives the spin relaxation time, which increases by two orders with the application of a back gate. The spin relaxation time is found to be proportional to the electronic elastic scattering time, demonstrating the Elliot-Yafet spin relaxation mechanism. A sizeable Kane-Mele-like coupling strength of over 5.5 meV is determined by extrapolating the temperature dependence to zero.

  20. Theoretical evaluation of maximum electric field approximation of direct band-to-band tunneling Kane model for low bandgap semiconductors

    NASA Astrophysics Data System (ADS)

    Dang Chien, Nguyen; Shih, Chun-Hsing; Hoa, Phu Chi; Minh, Nguyen Hong; Thi Thanh Hien, Duong; Nhung, Le Hong

    2016-06-01

    The two-band Kane model has been popularly used to calculate the band-to-band tunneling (BTBT) current in tunnel field-effect transistor (TFET) which is currently considered as a promising candidate for low power applications. This study theoretically clarifies the maximum electric field approximation (MEFA) of direct BTBT Kane model and evaluates its appropriateness for low bandgap semiconductors. By analysing the physical origin of each electric field term in the Kane model, it has been elucidated in the MEFA that the local electric field term must be remained while the nonlocal electric field terms are assigned by the maximum value of electric field at the tunnel junction. Mathematical investigations have showed that the MEFA is more appropriate for low bandgap semiconductors compared to high bandgap materials because of enhanced tunneling probability in low field regions. The appropriateness of the MEFA is very useful for practical uses in quickly estimating the direct BTBT current in low bandgap TFET devices.

  1. Correlation of the Miocene Peach Spring Tuff with the geomagnetic polarity time scale and new constraints on tectonic rotations in the Mojave Desert, California

    USGS Publications Warehouse

    Hillhouse, John W.; Miller, David M.; Turrin, Brent D.; Reynolds, Robert E.; Miller, David M.

    2010-01-01

    We report new paleomagnetic results and 40Ar/39Ar ages from the Peach Spring Tuff (PST), a key marker bed that occurs in the desert region between Barstow, California, and Peach Springs, Arizona. The 40Ar/39Ar ages were determined using individual hand-picked sanidine crystals from ash-flow specimens used in previous paleomagnetic studies at eight sites correlated by mineralogy, stratigraphic position, and magnetic inclination. Site-mean ages, which range from 18.43 Ma to 18.78 Ma with analytical precision (1 s.d.) typically 0.04 Ma, were obtained from areas near Fort Rock, AZ; McCullough Mts, NV; Cima Dome, Parker Dam, Danby, Ludlow, Kane Walsh, and Stoddard Wash, CA. The regional mean age determination is 18.71 ± 0.13 Ma, after the data were selected for sanidine crystals that yielded greater than 90% radiogenic argon (N=40). This age determination is compatible with previous 40Ar/39Ar dating of the PST after taking various neutron-flux monitor calibrations into account. We report paleomagnetic results from eight new sites that bear on reconstructions of the Miocene basins associated with the Hector Formation, Barstow Formation, and similar fine-grained sedimentary deposits in the Barstow region. Key findings of the new paleomagnetic study pertain to age control of the Hector Formation and clockwise rotation of the Northeast Mojave Domain. Our study of a rhyolitic ash flow at Baxter Wash, northern Cady Mountains, confirms the correlation of the PST within the Hector Formation and prompts reinterpretation of the previously determined magnetostratigraphy. Our model correlates the PST to the normal-polarity zone just below the C6-C5E boundary (18.748 Ma) of the astronomically tuned Geomagnetic Polarity Time Scale. After emplacement of the Peach Spring Tuff at Alvord Mountain and the Cady Mountains, the southern part of the Northeast Mojave Domain (between Cady and Coyote Lake faults) underwent clockwise rotation of 30°–55°. Clockwise rotations increase with

  2. Validation of a "Kane's Dynamics" Model for the Active Rack Isolation System

    NASA Technical Reports Server (NTRS)

    Beech, Geoffrey S.; Hampton, R. David

    2000-01-01

    Many microgravity space-science experiments require vibratory acceleration levels unachievable without active isolation. The Boeing Corporation's Active Rack Isolation System (ARIS) employs a novel combination of magnetic actuation and mechanical linkages, to address these isolation requirements on the International Space Station (ISS). ARIS provides isolation at the rack (international Standard Payload Rack, or ISPR) level. Effective model-based vibration isolation requires (1) an isolation device, (2) an adequate dynamic (i.e., mathematical) model of that isolator, and (3) a suitable, corresponding controller, ARIS provides the ISS response to the first requirement. In November 1999, the authors presented a response to the second ("A 'Kane's Dynamics' model for the Active Rack Isolation System", Hampton and Beech) intended to facilitate an optimal-controls approach to the third. This paper documents the validation of that high-fidelity dynamic model of ARIS. As before, this model contains the full actuator dynamics, however, the umbilical models are not included in this presentation. The validation of this dynamics model was achieved by utilizing two Commercial Off the Shelf (COTS) software tools: Deneb's ENVISION, and Online Dynamics' AUTOLEV. ENVISION is a robotics software package developed for the automotive industry that employs 3-dimensional (3-D) Computer Aided Design (CAD) models to facilitate both forward and inverse kinematics analyses. AUTOLEV is a DOS based interpreter that is designed in general to solve vector based mathematical problems and specifically to solve Dynamics problems using Kane's method.

  3. Why the Global Availability of Mind Wandering Necessitates Resource Competition: Reply to McVay and Kane (2010)

    ERIC Educational Resources Information Center

    Smallwood, Jonathan

    2010-01-01

    When the mind wanders, conscious thoughts come to mind that are only loosely related to the task being performed. This phenomenon produces tension within the cognitive sciences because the interfering nature of these thoughts is at odds with the assumption that such processes are functional in daily life. In their comment, McVay and Kane (2010)…

  4. The topological Anderson insulator phase in the Kane-Mele model.

    PubMed

    Orth, Christoph P; Sekera, Tibor; Bruder, Christoph; Schmidt, Thomas L

    2016-04-05

    It has been proposed that adding disorder to a topologically trivial mercury telluride/cadmium telluride (HgTe/CdTe) quantum well can induce a transition to a topologically nontrivial state. The resulting state was termed topological Anderson insulator and was found in computer simulations of the Bernevig-Hughes-Zhang model. Here, we show that the topological Anderson insulator is a more universal phenomenon and also appears in the Kane-Mele model of topological insulators on a honeycomb lattice. We numerically investigate the interplay of the relevant parameters, and establish the parameter range in which the topological Anderson insulator exists. A staggered sublattice potential turns out to be a necessary condition for the transition to the topological Anderson insulator. For weak enough disorder, a calculation based on the lowest-order Born approximation reproduces quantitatively the numerical data. Our results thus considerably increase the number of candidate materials for the topological Anderson insulator phase.

  5. a Six-Link Kinematic Chain Model of Human Body Using Kane's Method

    NASA Astrophysics Data System (ADS)

    Rambely, A. S.; Fazrolrozi

    A biomechanics model of six-link kinematic chain of human body is developed by using Kane's method. The kinematic data comprise of six segments; foot, calf, thigh, trunk, upper arm and forearm, are obtained through data collection of walking, running and jumping using the Vicon Nexus system. The motion capture system uses 12 Vicon MX-3+ cameras and 12 Vicon MX-F40 cameras, two DV (50 Hz) cameras and a force plate (100 Hz). Inverse dynamics approach is used to obtain the unknown value of torques produced by joint segments during walking, running and jumping activities. The results show that the largest value of torques produced occurs at the foot segment.

  6. Anomalous band inversion protected by symmetry in a topological insulator of the Kane-Mele model

    NASA Astrophysics Data System (ADS)

    Yu, Jie-Xiang; Che, J. G.

    2016-01-01

    Depositing Au on a graphene derivative, which involves substituting four C atoms with three N atoms in a 3 ×3 cell graphene, we realized a topological insulator of the Kane-Mele model with a gap of 50 meV surrounding the Dirac point of graphene. In this material, we observed an anomalous band inversion (BI) protected by the symmetry with character e of group C3 V. The symmetry constrains two e bands with mirror-symmetry combination and mirror-antisymmetry combination (MAC) of Au and N orbitals degenerate at Γ , whereas the interaction of π* of graphene on the e -MAC band tends to lift this degenerate, resulting in that the π* and e -MAC band exchange their orbital components near Γ , causing thus a discontinued BI.

  7. The topological Anderson insulator phase in the Kane-Mele model.

    PubMed

    Orth, Christoph P; Sekera, Tibor; Bruder, Christoph; Schmidt, Thomas L

    2016-01-01

    It has been proposed that adding disorder to a topologically trivial mercury telluride/cadmium telluride (HgTe/CdTe) quantum well can induce a transition to a topologically nontrivial state. The resulting state was termed topological Anderson insulator and was found in computer simulations of the Bernevig-Hughes-Zhang model. Here, we show that the topological Anderson insulator is a more universal phenomenon and also appears in the Kane-Mele model of topological insulators on a honeycomb lattice. We numerically investigate the interplay of the relevant parameters, and establish the parameter range in which the topological Anderson insulator exists. A staggered sublattice potential turns out to be a necessary condition for the transition to the topological Anderson insulator. For weak enough disorder, a calculation based on the lowest-order Born approximation reproduces quantitatively the numerical data. Our results thus considerably increase the number of candidate materials for the topological Anderson insulator phase. PMID:27045779

  8. Electric and geometric controlling of the magnetic coupling in Kane-Mele nanoribbons

    SciTech Connect

    Bao, Weicheng; Zou, Liang-Jian; Lin, H.-Q.

    2015-05-07

    In this paper, we show that indirect spin interaction J between two magnetic impurities located on honeycomb Kane-Mele zigzag/armchair ribbons (KMZR/KMAR) is easily controlled by staggered potential and geometry. We demonstrate that J in periodic-boundary KMZR reaches maximum at the edges, and oscillates between antiferromagnetic and ferromagnetic couplings when tuning the sublattice staggered potential Δ. The odd-even length effect of J in KMZR and the width dependence of J in KMAR are also presented. These results clearly demonstrate the unique role of topological edge states and finite-size effect in magnetic coupling of quantum spin Hall (QSH) ribbons, and the controllability of the edge magnetism, hence favoring the fabrication of the spintronic devices in two-dimensional buckled honeycomb materials, e.g., silicene and germanene.

  9. The topological Anderson insulator phase in the Kane-Mele model

    PubMed Central

    Orth, Christoph P.; Sekera, Tibor; Bruder, Christoph; Schmidt, Thomas L.

    2016-01-01

    It has been proposed that adding disorder to a topologically trivial mercury telluride/cadmium telluride (HgTe/CdTe) quantum well can induce a transition to a topologically nontrivial state. The resulting state was termed topological Anderson insulator and was found in computer simulations of the Bernevig-Hughes-Zhang model. Here, we show that the topological Anderson insulator is a more universal phenomenon and also appears in the Kane-Mele model of topological insulators on a honeycomb lattice. We numerically investigate the interplay of the relevant parameters, and establish the parameter range in which the topological Anderson insulator exists. A staggered sublattice potential turns out to be a necessary condition for the transition to the topological Anderson insulator. For weak enough disorder, a calculation based on the lowest-order Born approximation reproduces quantitatively the numerical data. Our results thus considerably increase the number of candidate materials for the topological Anderson insulator phase. PMID:27045779

  10. Electric and geometric controlling of the magnetic coupling in Kane-Mele nanoribbons

    NASA Astrophysics Data System (ADS)

    Bao, Weicheng; Zou, Liang-Jian; Lin, H.-Q.

    2015-05-01

    In this paper, we show that indirect spin interaction J between two magnetic impurities located on honeycomb Kane-Mele zigzag/armchair ribbons (KMZR/KMAR) is easily controlled by staggered potential and geometry. We demonstrate that J in periodic-boundary KMZR reaches maximum at the edges, and oscillates between antiferromagnetic and ferromagnetic couplings when tuning the sublattice staggered potential Δ. The odd-even length effect of J in KMZR and the width dependence of J in KMAR are also presented. These results clearly demonstrate the unique role of topological edge states and finite-size effect in magnetic coupling of quantum spin Hall (QSH) ribbons, and the controllability of the edge magnetism, hence favoring the fabrication of the spintronic devices in two-dimensional buckled honeycomb materials, e.g., silicene and germanene.

  11. Magneto-optics of massless Kane fermions: Role of the flat band and unusual Berry phase

    NASA Astrophysics Data System (ADS)

    Malcolm, J. D.; Nicol, E. J.

    2015-07-01

    Hg1 -xCdxTe at a critical doping x =xc≈0.17 has a bulk dispersion which includes two linear cones meeting at a single point at zero energy, intersecting a nearly flat band, similar to the pseudospin-1 Dirac-Weyl system. In the presence of a finite magnetic field, these bands condense into highly degenerate Landau levels. We have numerically calculated the frequency-dependent magneto-optical and zero-field conductivity of this material using the Kane model. These calculations show good agreement with recent experimental measurements. We discuss the signature of the flat band and the split peaks of the magneto-optics in terms of general pseudospin-s models and propose that the system exhibits a non-π -quantized Berry phase, found in recent theoretical work.

  12. The topological Anderson insulator phase in the Kane-Mele model

    NASA Astrophysics Data System (ADS)

    Orth, Christoph P.; Sekera, Tibor; Bruder, Christoph; Schmidt, Thomas L.

    2016-04-01

    It has been proposed that adding disorder to a topologically trivial mercury telluride/cadmium telluride (HgTe/CdTe) quantum well can induce a transition to a topologically nontrivial state. The resulting state was termed topological Anderson insulator and was found in computer simulations of the Bernevig-Hughes-Zhang model. Here, we show that the topological Anderson insulator is a more universal phenomenon and also appears in the Kane-Mele model of topological insulators on a honeycomb lattice. We numerically investigate the interplay of the relevant parameters, and establish the parameter range in which the topological Anderson insulator exists. A staggered sublattice potential turns out to be a necessary condition for the transition to the topological Anderson insulator. For weak enough disorder, a calculation based on the lowest-order Born approximation reproduces quantitatively the numerical data. Our results thus considerably increase the number of candidate materials for the topological Anderson insulator phase.

  13. 27 CFR 19.310 - Wash water.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 1 2012-04-01 2012-04-01 false Wash water. 19.310 Section 19.310 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX AND TRADE BUREAU, DEPARTMENT OF... Byproducts § 19.310 Wash water. Water used in washing chemicals to remove spirits may be run into a wash...

  14. 27 CFR 19.310 - Wash water.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 1 2013-04-01 2013-04-01 false Wash water. 19.310 Section 19.310 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX AND TRADE BUREAU, DEPARTMENT OF... Byproducts § 19.310 Wash water. Water used in washing chemicals to remove spirits may be run into a wash...

  15. 27 CFR 19.310 - Wash water.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 1 2014-04-01 2014-04-01 false Wash water. 19.310 Section 19.310 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX AND TRADE BUREAU, DEPARTMENT OF... Byproducts § 19.310 Wash water. Water used in washing chemicals to remove spirits may be run into a wash...

  16. 27 CFR 19.328 - Wash water.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 1 2010-04-01 2010-04-01 false Wash water. 19.328 Section... THE TREASURY LIQUORS DISTILLED SPIRITS PLANTS Production Chemical By-Products § 19.328 Wash water. Water used in washing chemicals to remove spirits therefrom may be run into a wash tank or a...

  17. 27 CFR 19.310 - Wash water.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 1 2011-04-01 2011-04-01 false Wash water. 19.310 Section 19.310 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX AND TRADE BUREAU, DEPARTMENT OF... Byproducts § 19.310 Wash water. Water used in washing chemicals to remove spirits may be run into a wash...

  18. Spring Tire

    NASA Technical Reports Server (NTRS)

    Asnani, Vivake M.; Benzing, Jim; Kish, Jim C.

    2011-01-01

    The spring tire is made from helical springs, requires no air or rubber, and consumes nearly zero energy. The tire design provides greater traction in sandy and/or rocky soil, can operate in microgravity and under harsh conditions (vastly varying temperatures), and is non-pneumatic. Like any tire, the spring tire is approximately a toroidal-shaped object intended to be mounted on a transportation wheel. Its basic function is also similar to a traditional tire, in that the spring tire contours to the surface on which it is driven to facilitate traction, and to reduce the transmission of vibration to the vehicle. The essential difference between other tires and the spring tire is the use of helical springs to support and/or distribute load. They are coiled wires that deform elastically under load with little energy loss.

  19. Geologic map of the Vigo NE quadrangle, Lincoln County, Nevada

    USGS Publications Warehouse

    Scott, Robert B.; Harding, Anne E.

    2006-01-01

    This map of the Vigo NE quadrangle, Lincoln County, Nevada records the distribution, stratigraphy, and structural relationships of Tertiary intracaldera lavas and tuffs in the southeastern part of the Kane Springs Wash caldera, extracaldera Tertiary and upper Paleozoic rocks, and late Cenozoic surficial deposits both within and outside the caldera. The alkaline to peralkaline Kane Springs Wash caldera is the youngest (14 Ma) of three chemically related metaluminous to peralkaline calderas (Boulder Canyon caldera, 15 Ma; Narrow Canyon caldera, 16 Ma) of the nested Kane Springs Wash caldera complex. The chemistry of this caldera complex became progressively more alkalic with time, in contrast to the older calc-alkalic calderas and caldera complexes to the north that migrated progressively southward in eastern Nevada. The increasingly peralkaline eruptions from the Kane Springs Wash caldera complex reached a climax that was simultaneous with the end of both rapid extension and magmatism in this part of the Basin and Range. Using the assumption that degree of tilting is related to the degree of extension, the rate of extension increased until the abrupt halt at about 14 Ma. Silicic volcanism terminated at the Kane Springs Wash caldera followed only by local sporadic basaltic eruptions that ended by about 8 Ma. The northern boundary of an east-west-trending amagmatic corridor appears in the Vigo NE quadrangle south of the Kane Springs Wash caldera.

  20. A Window-Washing Challenge

    ERIC Educational Resources Information Center

    Roman, Harry T.

    2010-01-01

    Skyscrapers sure do have a lot of windows, and these windows are cleaned and checked regularly. All this takes time, money, and puts workers at potential risk. Might there be a better way to do it? In this article, the author discusses a window-washing challenge and describes how students can tackle this task, pick up the challenge, and creatively…

  1. Draft genome sequence of Micrococcus luteus strain O'Kane implicates metabolic versatility and the potential to degrade polyhydroxybutyrates.

    PubMed

    Hanafy, Radwa A; Couger, M B; Baker, Kristina; Murphy, Chelsea; O'Kane, Shannon D; Budd, Connie; French, Donald P; Hoff, Wouter D; Youssef, Noha

    2016-09-01

    Micrococcus luteus is a predominant member of skin microbiome. We here report on the genomic analysis of Micrococcus luteus strain O'Kane that was isolated from an elevator. The partial genome assembly of Micrococcus luteus strain O'Kane is 2.5 Mb with 2256 protein-coding genes and 62 RNA genes. Genomic analysis revealed metabolic versatility with genes involved in the metabolism and transport of glucose, galactose, fructose, mannose, alanine, aspartate, asparagine, glutamate, glutamine, glycine, serine, cysteine, methionine, arginine, proline, histidine, phenylalanine, and fatty acids. Genomic comparison to other M. luteus representatives identified the potential to degrade polyhydroxybutyrates, as well as several antibiotic resistance genes absent from other genomes. PMID:27583205

  2. A basket for washing benthological samples

    USGS Publications Warehouse

    Selgeby, James H.

    1971-01-01

    Since benthological samples collected with dredges are usually too large to be preserved in toto, a washing method must be employed to reduce the sample volume without losing or damaging the organisms. Traditionally, the sample is washed in a sieve until the volume is small enough for convenient handling or preservation. Most washing procedures are time-consuming and laborious. To save time in washing samples, a washing 'basket' was designed which accomadates a Ponar dredge. The only additional equipment needed to employ the washing basket effectively is a pump that delivers about 8 gallons of water per minute.

  3. Shallow seismic structure of the Kane core complex, Mid-Atlantic Ridge 23°30'N

    NASA Astrophysics Data System (ADS)

    Xu, M.; Canales, J.; Tucholke, B.; Dubois, D.

    2007-12-01

    We present high-resolution travel-time seismic tomography models obtained along and across the Kane core complex (KCC), a proposed IODP drilling target located off-axis on the Mid-Atlantic Ridge (MAR) near 23°30'N south of the Kane Fracture Zone. Together with existing geological studies, our results characterize the lateral variability in structure and composition of this well developed oceanic core complex. The KCC is a large (~23 km by ~35 km in the dip and strike directions, respectively) megamullion formed by a long-lived detachment fault between ~3.3 and 2.1 Ma. The detachment is cut along-strike by a high- angle, west-dipping normal fault (East fault). Extensive ROV and dredge sampling indicates that the northern part of East fault is covered by in situ pillow basalts, but at the central dome the fault exposes the underlying lithosphere, which is dominated by highly altered harzburgites. In contrast, the northern dome to the east of East fault appears to consist largely of gabbros. We derived the two-dimensional, shallow P-wave velocity structure of the KCC along six ~20- to 40-km-long profiles, including three strike lines and three dip lines. The seismic data were acquired in 2001 using the 6-km- long hydrophone streamer and air-gun array of R/V Ewing (cruise EW0102). The dense sampling (shots spaced every 37.5 m, with receivers spaced every 12.5 m) and the shallow seafloor of the area (<3000 m) allows us to image lateral variations in velocity structure at scales of 1 km or less within the upper ~0.5-1.5 km of the lithosphere. Our results show significant lateral variations in velocity structure in both strike and dip directions, and these variations to first order correlate with sampled lithologies. The lowest observed velocities (~3.3 km/s at seafloor increasing to ~5.1 km/s at ~1 km depth) correlate with the zone of volcanics found along the northern part of East fault. Low velocities also occur beneath the volcanic terrain of the remnant hanging wall

  4. Classification of volcanoes of the Kane Patera Quadrangle of Io: Proportions of lava flows and pyroclastic flows

    NASA Technical Reports Server (NTRS)

    Elston, W. E.

    1984-01-01

    Voyager 1 images show 14 volcanic centers wholly or partly within the Kane Patera quadrangle of Io, which are divided into four major classes: (1) shield with parallel flows; (2) shield with early radial fan shapd flows; (3) shield with radial fan shaped flows, surfaces of flows textured with longitudinal ridges; and (4) depression surrounded by plateau-forming scarp-bounded, untextured deposits. The interpretation attempted here hinges largely on the ability to distinguish lava flows from pyroclastic flows by remote sensing.

  5. Flow direction indicators in lithic-rich, basal ground layers in western exposures of the Miocene Peach Spring Tuff, California

    NASA Astrophysics Data System (ADS)

    Buesch, D.

    2012-12-01

    Lithic-rich, basal ground layer (BGL) deposits occur in three western exposures of the 18.7 Ma Peach Spring Tuff (PST), and structures indicate directions of transport in the pyroclastic flow. Locations include (1) Kane Wash (Newberry Mountains), (2) "West Gem" (Daggett Ridge), and (3) Alvord Mountain area. These locations are 190-225 km from the PST source in the Silver Creek Caldera, southwest Black Mountain, Arizona (Pearthree and others, 2009); however, ~50 km is from extension across the Lower Colorado River Extensional Corridor. In each location, many lithic clasts were locally derived. Lithic-rich horizons in Kane Wash exposures of the PST were described by Buesch (1991). Total thickness of valley-filling ignimbrite ranges from <1-30 m and was deposited on alluvial fan and axial stream sandstone. Thickness of 8 individual lithic-rich horizons (a type of BGL) range from 4-300 cm with lithic clasts 2-472 cm. Clast size-grading, imbrication, and elongation indicate directions of flow. Each horizon was attributed to (1) incorporation and concentration of local clasts into a boundary layer of the pyroclastic flow as it traversed topography, (2) decoupling of a lithic-rich layer from the over riding flow, (3) independent movement of a lithic-rich flow along local topography (180°±30°) with the ash-rich pyroclastic flow direction probably independent of local topography, but along the main paleovalley (245°±20°), and (4) introduction and westward deflection of lithic-rich flows into the main, valley-filling, pyroclastic flow. Multiple lithic-rich horizons indicate repeated, locally developed boundary layers from the body of the pyroclastic flow throughout the flow history. In the West Gem exposure, the PST is 5.3 m thick and was deposited on alluvial sandstone. The 60-cm thick, lithic-rich, BGL contains lithic clasts <25 cm. Poorly developed clast imbrication and elongation, and a rip-up flap from the BGL folded into the lower part of the ignimbrite, indicate

  6. Kane Basin, Nares-Strait: Strike-slip induced sediment deformation along the coastline of Ellesmere Island

    NASA Astrophysics Data System (ADS)

    Ehrhardt, A.; Schnabel, M.; Damm, V.

    2015-12-01

    The nature of the Nares-Strait (NS), a seaway between Greenland and Ellesmere Island, is important to understand the plate tectonic history of the Arctic region. As it is clear that rifting and seafloor spreading took place between Greenland and Baffin Island, it is unclear how the extension was compensated between Greenland and Ellesmere Island. Already Alfred Wegener suggested some kind of left lateral transform fault along the NS, a straight seaway separating the Greenland Plate from the North American Plate, nowadays proposed as the Wegener-Fault. Plate tectonic reconstruction models require a transform fault for the compensation of several hundred km of extension and seafloor spreading from Late Cretaceous to Eocene times. However, land geological data do not support this thesis and let assume that no lateral displacement occurred between Greenland and Ellesmere Island. With the formation of the recent Midatlantic Ridge System between Greenland and Europe since the early Eocene, the western branch became inactive and consequently the proposed transform fault, too. Northeast motion of Greenland replaced the left lateral transform and caused compression. The inactive transform fault was overprinted and as a consequence it was altered, probably displaced and is difficult to recognize. The Kane Basin is one of a series of basins that are aligned along the NS. It resembles probably a pull-apart basin following the approach that NS developed as transform fault. This paper presents insight into the Kane Basin by means of 2D seismic data, sonobuoy data, gravity and magnetic data acquired during surveys of BGR in 2001 and 2010. The eastern Kane Basin is characterized by a deeper rim and a more shallow central part. Most of it is floored by Proterozoic crust without any sediment on top of it. Only in the western part of the Kane Basin a sedimentary infill can be recorded which terminates with an erosional truncation on to the seafloor. Because of the mapped sediment and

  7. The Microgravity Isolation Mount: A Linearized State-Space Model a la Newton and Kane

    NASA Technical Reports Server (NTRS)

    Hampton, R. David; Tryggvason, Bjarni V.; DeCarufel, Jean; Townsend, Miles A.; Wagar, William O.

    1999-01-01

    Vibration acceleration levels on large space platforms exceed the requirements of many space experiments. The Microgravity Vibration Isolation Mount (MIM) was built by the Canadian Space Agency to attenuate these disturbances to acceptable levels, and has been operational on the Russian Space Station Mir since May 1996. It has demonstrated good isolation performance and has supported several materials science experiments. The MIM uses Lorentz (voice-coil) magnetic actuators to levitate and isolate payloads at the individual experiment/sub-experiment (versus rack) level. Payload acceleration, relative position, and relative orientation (Euler-parameter) measurements are fed to a state-space controller. The controller, in turn, determines the actuator currents needed for effective experiment isolation. This paper presents the development of an algebraic, state-space model of the MIM, in a form suitable for optimal controller design. The equations are first derived using Newton's Second Law directly; then a second derivation (i.e., validation) of the same equations is provided, using Kane's approach.

  8. Analysis of the Kane-Mele-Kondo lattice at finite temperatures

    NASA Astrophysics Data System (ADS)

    Yoshida, Tsuneya; Peters, Robert; Kawakami, Norio

    Recently, correlation effects on topological insulators are extensively studied because the interplay of topological properties and electron correlations is expected to induce exotic phenomena. A promising candidate for a topological insulator in heavy-fermion systems is ∖mathrmSmB6 where the Kondo effects play an essential role. In this article, we study the Kane-Mele-Kondo lattice at finite temperatures. By using the dynamical mean-field theory, we obtain a temperature vs. interaction phase diagram (a Doniach phase diagram). Furthermore, we have observed an intriguing crossover behavior induced by the interplay of electron correlations and topologically nontrivial properties. In the bulk system, the spin-Hall conductivity which is proportional to the spin Chern number is zero at low temperatures while the conductivity rapidly increases with increasing temperature. Correspondingly, gapless modes are restored by temperature effects at the edge sites, which are destroyed by the Kondo effect at low temperature. This work is partly supported by KAKENHI (No. 25400366, and 15H05855). The numerical calculations were performed at the ISSP in the University of Tokyo and on the SR16000 at YITP in Kyoto University.

  9. 7 CFR 58.429 - Washing machine.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 7 Agriculture 3 2012-01-01 2012-01-01 false Washing machine. 58.429 Section 58.429 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Standards....429 Washing machine. When used, the washing machine for cheese cloths and bandages shall be...

  10. 7 CFR 58.429 - Washing machine.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 7 Agriculture 3 2013-01-01 2013-01-01 false Washing machine. 58.429 Section 58.429 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Standards....429 Washing machine. When used, the washing machine for cheese cloths and bandages shall be...

  11. 7 CFR 58.429 - Washing machine.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 7 Agriculture 3 2014-01-01 2014-01-01 false Washing machine. 58.429 Section 58.429 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Standards....429 Washing machine. When used, the washing machine for cheese cloths and bandages shall be...

  12. 7 CFR 58.429 - Washing machine.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 7 Agriculture 3 2011-01-01 2011-01-01 false Washing machine. 58.429 Section 58.429 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Standards....429 Washing machine. When used, the washing machine for cheese cloths and bandages shall be...

  13. 7 CFR 58.429 - Washing machine.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 7 Agriculture 3 2010-01-01 2010-01-01 false Washing machine. 58.429 Section 58.429 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Standards....429 Washing machine. When used, the washing machine for cheese cloths and bandages shall be...

  14. 21 CFR 1250.87 - Wash water.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 21 Food and Drugs 8 2013-04-01 2013-04-01 false Wash water. 1250.87 Section 1250.87 Food and Drugs... Sanitation Facilities and Conditions on Vessels § 1250.87 Wash water. Where systems installed on vessels for wash water, as defined in § 1250.3(n), do not comply with the requirements of a potable water...

  15. 21 CFR 1250.87 - Wash water.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Wash water. 1250.87 Section 1250.87 Food and Drugs... Sanitation Facilities and Conditions on Vessels § 1250.87 Wash water. Where systems installed on vessels for wash water, as defined in § 1250.3(n), do not comply with the requirements of a potable water...

  16. 21 CFR 1250.87 - Wash water.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 21 Food and Drugs 8 2014-04-01 2014-04-01 false Wash water. 1250.87 Section 1250.87 Food and Drugs... Sanitation Facilities and Conditions on Vessels § 1250.87 Wash water. Where systems installed on vessels for wash water, as defined in § 1250.3(n), do not comply with the requirements of a potable water...

  17. 21 CFR 1250.87 - Wash water.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 21 Food and Drugs 8 2011-04-01 2011-04-01 false Wash water. 1250.87 Section 1250.87 Food and Drugs... Sanitation Facilities and Conditions on Vessels § 1250.87 Wash water. Where systems installed on vessels for wash water, as defined in § 1250.3(n), do not comply with the requirements of a potable water...

  18. 21 CFR 1250.87 - Wash water.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 21 Food and Drugs 8 2012-04-01 2012-04-01 false Wash water. 1250.87 Section 1250.87 Food and Drugs... Sanitation Facilities and Conditions on Vessels § 1250.87 Wash water. Where systems installed on vessels for wash water, as defined in § 1250.3(n), do not comply with the requirements of a potable water...

  19. Alternative Antimicrobial Commercial Egg Washing Procedures

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Commercial table eggs are washed prior to packaging. Standard wash procedures use an alkaline pH and warm water. If a cool water method could be developed that would still provide a microbiologically safe egg, the industry may save energy costs associated with water heating. Four wash procedures ...

  20. 140° view showing: Pigeon Wash, foreground; Lake Mead NRA Approved ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    140° view showing: Pigeon Wash, foreground; Lake Mead NRA Approved Road 148, middleground; and part of the Cockscomb Range, background. This negative forms a 360° composite panoramic when joined with AZ-2-78 and AZ-2-79. See AZ-2-89 for color version. - Tassi Ranch, Tassi Springs, Littlefield, Mohave County, AZ

  1. Ground-water levels in aquifers used for residential supply, Campton Township, Kane County, Illinois

    USGS Publications Warehouse

    Kay, Robert T.; Kraske, Kurt A.

    1996-01-01

    The U.S. Geological Survey, in cooperation with the Campton Township Board of Trustees, measured water levels in the aquifers used for residential supply in Campton Township, Kane County, Illinois. Aquifers used for residential supply are the shallow and deep aquifers in the glacial drift, composed of unconsolidated sand and gravels; the Alexandrian-Maquoketa aquifer, composed of dolomite and shale of the Alexandrian Series and the Maquoketa Group; the Galena-Platteville aquifer, composed of dolomite of the Platteville and Galena Groups; and the Ancell aquifer, composed of sandstones of the Glenwood Formation and the St. Peter Sanstone. Water-level altitudes in the shallow drift aquifers generally follow surface topography. Analysis of water-level data does not clearly indicate overutilization of these aquifers. Water-level altitudes in the deep drift aquifers decrease from west to east. Comparison of historical depth to water measurements with current (1995) measurements indicates large decreases in water levels in some areas. The deep drift aquifers may be overutilized at these locations. Water-level altitudes in the Alexandrian-Maquoketa aquifer generally decrease from west to east. The potentiometric surface of the aquifer follows the bedrock-surface topography in some locations. Localized low water-level altitudes and large decreases in water levels indicate the Alexandrian-Maquoketa aquifer is overutilized in several areas. Water-level altitudes in the wells finished in the Galena- Platteville aquifer vary by more than 300 feet. Large decreases in water levels in wells finished in the Galena-Platteville aquifer indicate the Galena-Platteville and Alexandrian-Maquoketa aquifers are overutilized in the northern part of the township. Water-level altitudes in the wells finished in the Ancell aquifer are also highly variable. There is no indication that the Ancell aquifer is overutilized.

  2. Postoperative washing of sutured wounds.

    PubMed

    Harrison, Conrad; Wade, Cian; Gore, Sinclair

    2016-11-01

    A best evidence topic was written according to the structured protocol. The three part question addressed was: [In patients undergoing closure of surgical wounds with sutures] does [keeping the wound dry for the first 48 h after closure] [reduce the incidence of surgical site infections (SSIs)]? 4 relevant papers were culled from the literature and appraised. The authors, date, country, population, study type, main outcomes, key results and study weaknesses were tabulated. Current NICE guidelines recommend cleaning surgical wounds with sterile saline only for the first 48 h following skin closure. We found no evidence that washing wounds with tap water during this period increases the incidence of SSIs compared to keeping them dry. Further randomised controlled trials will enable the construction of conclusive systematic reviews and meta-analyses. PMID:27668079

  3. Wash water waste pretreatment system

    NASA Technical Reports Server (NTRS)

    1977-01-01

    Investigations were completed on wash waters based on each candidate personal cleansing agent. Evaluations of coagulants, antifoam agents, and the effect of promising antifoams on the chemical precipitation were included. Based on these evaluations two candidate soaps as well as their companion antifoam agents were selected for further work. Operating parameters included the effect of soap concentration, ferric chloride concentration, duration of mixing, and pore size of depth filters on the degree of soap removal. The effect of pressure on water flow through filter cartridges and on the rate of decline of water flow was also investigated. The culmination of the program was the recommendation of a pretreatment concept based on chemical precipitation followed by pressure filtration.

  4. Bathing or washing babies after birth?

    PubMed

    Henningsson, A; Nyström, B; Tunnell, R

    One group of healthy full-term newborn babies was washed after birth and another was bathed to remove vernix caseosa and clean the skin. Few infections, none of them serious, occurred in either group. Bacterial colonisation of the umbilical cord on the third day of life was similar in both groups. The rectal temperature fell further and more infants cried during washing than during bathing. Thus bathing the baby after birth makes it calmer, quieter, and more comfortable than washing and causes less heat-loss. Clinical signs of infection and bacterial colonisation rates are no higher after bathing than after washing. PMID:6118769

  5. Kane-Mele Hubbard model on a zigzag ribbon: Stability of the topological edge states and quantum phase transitions

    NASA Astrophysics Data System (ADS)

    Chung, Chung-Hou; Lee, Der-Hau; Chao, Sung-Po

    2014-07-01

    We study the quantum phases and phase transitions of the Kane-Mele Hubbard (KMH) model on a zigzag ribbon of honeycomb lattice at a finite size via the weak-coupling renormalization group (RG) approach. In the noninteracting limit, the Kane-Mele (KM) model is known to support topological edge states where electrons show helical property with orientations of the spin and momentum being locked. The effective interedge hopping terms are generated due to finite-size effect. In the presence of an on-site Coulomb (Hubbard) interaction and the interedge hoppings, special focus is put on the stability of the topological edge states (TI phase) in the KMH model against (i) the charge and spin gaped (II) phase, (ii) the charge gaped but spin gapless (IC) phase, and (iii) the spin gaped but charge gapless (CI) phase depending on the number (even/odd) of the zigzag ribbons, doping level (electron filling factor) and the ratio of the Coulomb interaction to the interedge tunneling. We discuss different phase diagrams for even and odd numbers of zigzag ribbons. We find the TI-CI, II-IC, and II-CI quantum phase transitions are of the Kosterlitz-Thouless (KT) type. By computing various correlation functions, we further analyze the nature and leading instabilities of these phases. The relevance of our results for graphene is discussed.

  6. Closed circuit rebreathing to achieve inert gas wash-in for multiple breath wash-out

    PubMed Central

    O'Neill, Katherine; Downey, Damian G.; Elborn, J. Stuart; Bell, Nicholas J.; Smith, Jaclyn; Owers-Bradley, John

    2016-01-01

    Multiple breath wash-out (MBW) testing requires prior wash-in of inert tracer gas. Wash-in efficiency can be enhanced by a rebreathing tracer in a closed circuit. Previous attempts to deploy this did not account for the impact of CO2 accumulation on patients and were unsuccessful. We hypothesised that an effective rebreathe wash-in could be delivered and it would not alter wash-out parameters. Computer modelling was used to assess the impact of the rebreathe method on wash-in efficiency. Clinical testing of open and closed circuit wash-in–wash-out was performed in healthy controls and adult patients with cystic fibrosis (CF) using a circuit with an effective CO2 scrubber and a refined wash-in protocol. Wash-in efficiency was enhanced by rebreathing. There was no difference in mean lung clearance index between the two wash-in methods for controls (6.5 versus 6.4; p=0.2, n=12) or patients with CF (10.9 versus 10.8; p=0.2, n=19). Test time was reduced by rebreathe wash-in (156 versus 230 s for CF patients, p<0.001) and both methods were well tolerated. End wash-in CO2 was maintained below 2% in most cases. Rebreathe–wash-in is a promising development that, when correctly deployed, reduces wash-in time and facilitates portable MBW testing. For mild CF, wash-out outcomes are equivalent to an open circuit. PMID:27730167

  7. The source, discharge, and chemical characteristics of water from Agua Caliente Spring, Palm Springs, California

    USGS Publications Warehouse

    : Martin, Peter; Contributors: Brandt, Justin; Catchings, Rufus D.; Christensen, Allen H.; Flint, Alan L.; Gandhok, Gini; Goldman, Mark R.; Halford, Keith J.; Langenheim, V.E.; Martin, Peter; Rymer, Michael J.; Schroeder, Roy A.; Smith, Gregory A.; Sneed, Michelle

    2011-01-01

    Numerical models of fluid and temperature flow were developed for the Agua Caliente Spring to (1) test the validity of the conceptual model that the Agua Caliente Spring enters the valley-fill deposits from fractures in the underlying basement complex and rises through more than 800 feet of valley-fill deposits by way of a washed-sand conduit and surrounding low-permeability deposits (spring chimney) of its own making, (2) evaluate whether water-level declines in the regional aquifer will influence the temperature of discharging water, and (3) determine the source of thermal water in the perched aquifer. A radial-flow model was used to test the conceptual model and the effect of water-level declines. The observed spring discharge and temperature could be simulated if the vertical hydraulic conductivity of the spring orifice was about 200 feet per day and the horizontal hydraulic conductivity of the orifice (spring chimney) was about 0.00002 feet per day. The simulated vertical hydraulic conductivity is within the range of values reported for sand; however, the low value simulated for the horizontal hydraulic conductivity suggests that the spring chimney is cemented with increasing depth. Chemical data collected for this study indicate that the water at Agua Caliente Spring is at saturation with respect to both calcite and chalcedony, which provides a possible mechanism for cementation of the spring chimney. A simulated decline of about 100 feet in the regional aquifer had no effect on the simulated discharge of Agua Caliente Spring and resulted in a slight increase in the temperature of the spring discharge. Results from the radial-flow- and three-dimensional models of the Agua Caliente Spring area demonstrate that the distribution and temperature of thermal water in the perched water table can be explained by flow from a secondary shallow-subsurface spring orifice of the Agua Caliente Spring not contained by the steel collector tank, not by leakage from the

  8. Diverse sulfur metabolisms from two subterranean sulfidic spring systems.

    PubMed

    Rossmassler, Karen; Hanson, Thomas E; Campbell, Barbara J

    2016-08-01

    In sulfidic environments, microbes oxidize reduced sulfur compounds via several pathways. We used metagenomics to investigate sulfur metabolic pathways from microbial mat communities in two subterranean sulfidic streams in Lower Kane Cave, WY, USA and from Glenwood Hot Springs, CO, USA. Both unassembled and targeted recA gene assembly analyses revealed that these streams were dominated by Epsilonproteobacteria and Gammaproteobacteria, including groups related to Sulfurovum, Sulfurospirillum, Thiothrix and an epsilonproteobacterial group with no close cultured relatives. Genes encoding sulfide:quinone oxidoreductase (SQR) were abundant at all sites, but the specific SQR type and the taxonomic affiliation of each type differed between sites. The abundance of thiosulfate oxidation pathway genes (Sox) was not consistent between sites, although overall they were less abundant than SQR genes. Furthermore, the Sox pathway appeared to be incomplete in all samples. This work reveals both variations in sulfur metabolism within and between taxonomic groups found in these systems, and the presence of novel epsilonproteobacterial groups. PMID:27324397

  9. EFRT M-12 Issue Resolution: Solids Washing

    SciTech Connect

    Baldwin, David L.; Schonewill, Philip P.; Toth, James J.; Huckaby, James L.; Eslinger, Paul W.; Hanson, Brady D.; Kurath, Dean E.; Minette, Michael J.

    2009-08-14

    Pacific Northwest National Laboratory (PNNL) has been tasked by Bechtel National Inc. (BNI) on the River Protection Project-Hanford Tank Waste Treatment and Immobilization Plant (RPP-WTP) project to perform research and development activities to resolve technical issues identified for the Pretreatment Facility (PTF). The Pretreatment Engineering Platform (PEP) was designed, constructed, and operated as part of a plan to respond to issue M12, “Undemonstrated Leaching Processes.” The PEP is a 1/4.5-scale test platform designed to simulate the WTP pretreatment caustic leaching, oxidative leaching, ultrafiltration solids concentration, and slurry washing processes. The PEP replicates the WTP leaching processes using prototypic equipment and control strategies. Two operating scenarios were evaluated for the ultrafiltration process (UFP) and leaching operations. The first scenario has caustic leaching performed in the UFP-VSL-T01A/B ultrafiltration feed vessels, identified as Integrated Test A. The second scenario has caustic leaching conducted in the UFP-VSL-T02A ultrafiltration feed preparation vessel, identified as Integrated Test B. Washing operations in PEP Integrated Tests A and B were conducted successfully as per the approved run sheets. However, various minor instrumental problems occurred, and some of the process conditions specified in the run sheet were not met during the wash operations, such as filter-loop flow-rate targets not being met. Five analytes were selected based on full solubility and monitored in the post-caustic-leach wash as successful indicators of washing efficiency. These were aluminum, sulfate, nitrate, nitrite, and free hydroxide. Other analytes, including sodium, oxalate, phosphate, and total dissolved solids, showed indications of changing solubility; therefore, they were unsuitable for monitoring washing efficiency. In the post-oxidative-leach wash, two analytes with full solubility were selected as suitable indicators of washing

  10. Inhibition Of Washed Sludge With Sodium Nitrite

    SciTech Connect

    Congdon, J. W.; Lozier, J. S.

    2012-09-25

    This report describes the results of electrochemical tests used to determine the relationship between the concentration of the aggressive anions in washed sludge and the minimum effective inhibitor concentration. Sodium nitrate was added as the inhibitor because of its compatibility with the DWPF process. A minimum of 0.05M nitrite is required to inhibit the washed sludge simulant solution used in this study. When the worst case compositions and safety margins are considered, it is expected that a minimum operating limit of nearly 0.1M nitrite will be specified. The validity of this limit is dependent on the accuracy of the concentrations and solubility splits previously reported. Sodium nitrite additions to obtain 0.1M nitrite concentrations in washed sludge will necessitate the additional washing of washed precipitate in order to decrease its sodium nitrite inhibitor requirements sufficiently to remain below the sodium limits in the feed to the DWPF. Nitrite will be the controlling anion in "fresh" washed sludge unless the soluble chloride concentration is about ten times higher than predicted by the solubility splits. Inhibition of "aged" washed sludge will not be a problem unless significant chloride dissolution occurs during storage. It will be very important tomonitor the composition of washed sludge during processing and storage.

  11. Hand washing: changes in the skin flora.

    PubMed

    de Almeida e Borges, Lizandra Ferreira; Silva, Bruno Leonardo; Gontijo Filho, Paulo Pinto

    2007-08-01

    Frequent hand washing may result in skin damage and increase the number of microorganisms that colonize the skin. The purpose of this study was to evaluate changes in total flora of healthy and damaged hands that were caused by the use of gloves, soap, and antiseptics. Samples were collected from the healthy and damaged hands of 30 health care professionals before and after washing with water and nonmedicated soap for the technique of sterile polyethylene bag. Fifteen additional volunteers (technicians and students) were asked to wash their hands 20 times with water and soap; those with complaints of irritation were evaluated separately. Damaged or healthy hands did not present statistically significant differences (P > .05) in terms of qualitative analysis of epidemiologically important microorganisms; however, washing with water and soap was effective only for healthy hands. In short, the water and soap washing of damaged hands was not effective in reducing their contamination.

  12. Viability and functional integrity of washed platelets

    SciTech Connect

    Pineda, A.A.; Zylstra, V.W.; Clare, D.E.; Dewanjee, M.K.; Forstrom, L.A.

    1989-07-01

    The viability and functional integrity of saline- and ACD-saline-washed platelets were compared with those of unwashed platelets. After template bleeding time (TBT) was measured, 15 healthy volunteers underwent plateletpheresis and ingested 600 mg of aspirin. Autologous /sup 111/In-labeled platelets were transfused: unwashed (n = 5), washed with 0.9 percent saline solution (SS) (n = 5), and washed with a buffered 12.6 percent solution of ACD-A in 0.9 percent saline solution (n = 5). After transfusion, we measured TBT at 1, 4, and 24 hours; platelet survival at 10 minutes and 1, 4, and 24 hours and daily for 6 days; and the percentage of uptake in liver and spleen by quantitative whole-body radionuclide scintigraphy at 24 and 190 hours. We found that saline washing affected platelet recovery, 23.47 +/- 12 percent (p less than 0.001) as compared to 52.43 +/- 17 percent (p less than 0.002) for ACD-saline and 73.17 +/- 8 percent for control; that saline washing resulted in a greater liver uptake than control and ACD-saline-washed platelets (31.9 +/- 8% (p less than 0.001) vs 17.7 +/- 4.1 and 19.3 +/- 2.1% (p greater than 0.1), respectively); that, unlike control and ACD-saline-washed platelets, saline-washed platelets did not shorten bleeding time; and that neither type of washing affected survival. Although ACD-saline washing affects recovery, it also results in intact function, normal survival, higher recovery than SS platelets, and no significant liver uptake.

  13. 49 CFR 230.60 - Time of washing.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ..., DEPARTMENT OF TRANSPORTATION STEAM LOCOMOTIVE INSPECTION AND MAINTENANCE STANDARDS Boilers and Appurtenances Washing Boilers § 230.60 Time of washing. (a) Frequency of washing. All boilers shall thoroughly be washed... inspection. The date of the boiler wash shall be noted on the FRA Form No. 1 or FRA Form No. 3. (See...

  14. 49 CFR 230.60 - Time of washing.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ..., DEPARTMENT OF TRANSPORTATION STEAM LOCOMOTIVE INSPECTION AND MAINTENANCE STANDARDS Boilers and Appurtenances Washing Boilers § 230.60 Time of washing. (a) Frequency of washing. All boilers shall thoroughly be washed... inspection. The date of the boiler wash shall be noted on the FRA Form No. 1 or FRA Form No. 3. (See...

  15. 49 CFR 230.60 - Time of washing.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ..., DEPARTMENT OF TRANSPORTATION STEAM LOCOMOTIVE INSPECTION AND MAINTENANCE STANDARDS Boilers and Appurtenances Washing Boilers § 230.60 Time of washing. (a) Frequency of washing. All boilers shall thoroughly be washed... inspection. The date of the boiler wash shall be noted on the FRA Form No. 1 or FRA Form No. 3. (See...

  16. 49 CFR 230.60 - Time of washing.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ..., DEPARTMENT OF TRANSPORTATION STEAM LOCOMOTIVE INSPECTION AND MAINTENANCE STANDARDS Boilers and Appurtenances Washing Boilers § 230.60 Time of washing. (a) Frequency of washing. All boilers shall thoroughly be washed... inspection. The date of the boiler wash shall be noted on the FRA Form No. 1 or FRA Form No. 3. (See...

  17. 49 CFR 230.60 - Time of washing.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ..., DEPARTMENT OF TRANSPORTATION STEAM LOCOMOTIVE INSPECTION AND MAINTENANCE STANDARDS Boilers and Appurtenances Washing Boilers § 230.60 Time of washing. (a) Frequency of washing. All boilers shall thoroughly be washed... inspection. The date of the boiler wash shall be noted on the FRA Form No. 1 or FRA Form No. 3. (See...

  18. The Museum of Irish Industry, Robert Kane and Education for All in the Dublin of the 1850s and 1860s

    ERIC Educational Resources Information Center

    Cullen, Clara

    2009-01-01

    The Museum of Irish Industry in Dublin, in its short existence (1845-1867) facilitated the access of ordinary people to popular scientific education, became a "cause celebre" and was defended by popular protest when the government recommended its abolition in 1862. Its Director, Sir Robert Kane (1809-1890) was not only an advocate of popular…

  19. Mine and prospect map of the Vermilion Cliffs-Paria Canyon Instant Study Area and adjacent wilderness areas, Coconino County, Arizona, and Kane County, Utah

    USGS Publications Warehouse

    Lane, Michael

    1983-01-01

    Vermilion Cliffs-Paria Canyon Instant Study Area and adjacent wilderness areas are mostly in Coconino County Ariz., but extend into Kane County, Utah. The area studied in this report encompasses about 560 mi2 (1,450 km2). The study area includes the established Paria Canyon Primitive and Vermilion Cliffs Natural Areas between U.S. Highways 89 and 89A.

  20. Styles of Detachment Faulting at the Kane Oceanic Core Complex, 23°N Mid-Atlantic Ridge

    NASA Astrophysics Data System (ADS)

    Hansen, L. N.; Cheadle, M. J.; John, B. E.; Swapp, S. M.; Dick, H. J.; Tucholke, B. E.; Tivey, M. A.

    2007-12-01

    In 2004, R/V Knorr Cruise 180-2 used ROV Jason II, the autonomous vehicle ABE, and dredges to collect samples and geophysical data from the Kane Oceanic Core Complex (OCC) on the Mid-Atlantic Ridge at 23°N. Examination of the deformed samples by hand-sample analysis, petrography, electron backscatter diffraction, and geothermometry in conjunction with the interpreted bathymetry suggests that the Kane OCC is bound by a detachment fault system that initiated at a moderate to high angle (45-60°), and rooted below the brittle-plastic transition. Constraints on the initial dip of the detachment fault come from the slopes of the ridge forming the breakaway (>23° to the west and >22° to the east). Assuming this ridge formed by flexural uplift, these slopes suggest the detachment fault formed with a dip >45°. Fault rocks, including peridotite mylonites and gabbro ultramylonites, reveal a history of deformation from granulite and amphibolite through sub-greenschist facies including brittle cataclasis. We present two cross sections through the detachment fault and footwall based on samples collected from secondary, high-angle normal faults that cut the detachment. One section, through Cain Dome in the central OCC, is dominated by peridotite and shows a ~450-m thick zone of discrete ductile shear zones with the uppermost portion overprinted by a 200-m zone of semi-brittle and brittle deformation. These are maximum shear zone thicknesses due to the possibility of down-scarp slumping/displacement. The other section, through Adam Dome on the southwest part of the OCC, is dominated by gabbroic rocks and shows little deformation. This section lies <4 km from the breakaway, and is therefore inferred to have undergone only brittle deformation in the shallow crust. A rheologic analysis, using LPO-deduced deformation mechanisms and geothermometry to construct deformation mechanism maps, suggests strain rates for the amphibole-bearing gabbros, the gabbronorites, and the

  1. Alternative Antimicrobial Commercial Egg Washing Procedures.

    PubMed

    Hudson, Lauren K; Harrison, Mark A; Berrang, Mark E; Jones, Deana R

    2016-07-01

    Commercial table eggs are washed prior to packaging. Standard wash procedures use an alkaline pH and warm water. If a cool water method could be developed that would still provide a microbiologically safe egg, the industry may save energy costs associated with water heating. Four wash procedures were evaluated for Salmonella reduction: pH 11 at 48.9°C (industry standard), pH 11 at ambient temperature (∼20°C), pH 6 at 48.9°C, and pH 6 at ambient temperature. Alkaline washes contained potassium hydroxide-based detergent, while pH 6 washes contained approximately 200 ppm of chlorine and a proprietary chlorine stabilizer (T-128). When eggs were inoculated by immersion in a cell suspension of Salmonella Enteritidis and Salmonella Typhimurium, all treatments resulted in a slight and similar reduction of Salmonella numbers (approximately 0.77 log CFU/ml of shell emulsion reduction). When eggs were inoculated by droplet on the shell surface, Salmonella counts were reduced by approximately 5 log CFU when washed with chlorine plus the chlorine stabilizer at both temperatures and with the alkaline wash at the high temperature. The reductions in Salmonella by these treatments were not significantly (P > 0.05) different from each other but were significantly (P < 0.05) more than the reduction observed for the 20°C alkaline treatment and 20°C control water treatments. Ambient temperature acidic washes reduced Salmonella contamination to the same degree as the standard pH 11 warm water wash and may be a viable option to reduce cost, increase shelf life, and slow pathogen growth in and on shell eggs. PMID:27357042

  2. Alternative Antimicrobial Commercial Egg Washing Procedures.

    PubMed

    Hudson, Lauren K; Harrison, Mark A; Berrang, Mark E; Jones, Deana R

    2016-07-01

    Commercial table eggs are washed prior to packaging. Standard wash procedures use an alkaline pH and warm water. If a cool water method could be developed that would still provide a microbiologically safe egg, the industry may save energy costs associated with water heating. Four wash procedures were evaluated for Salmonella reduction: pH 11 at 48.9°C (industry standard), pH 11 at ambient temperature (∼20°C), pH 6 at 48.9°C, and pH 6 at ambient temperature. Alkaline washes contained potassium hydroxide-based detergent, while pH 6 washes contained approximately 200 ppm of chlorine and a proprietary chlorine stabilizer (T-128). When eggs were inoculated by immersion in a cell suspension of Salmonella Enteritidis and Salmonella Typhimurium, all treatments resulted in a slight and similar reduction of Salmonella numbers (approximately 0.77 log CFU/ml of shell emulsion reduction). When eggs were inoculated by droplet on the shell surface, Salmonella counts were reduced by approximately 5 log CFU when washed with chlorine plus the chlorine stabilizer at both temperatures and with the alkaline wash at the high temperature. The reductions in Salmonella by these treatments were not significantly (P > 0.05) different from each other but were significantly (P < 0.05) more than the reduction observed for the 20°C alkaline treatment and 20°C control water treatments. Ambient temperature acidic washes reduced Salmonella contamination to the same degree as the standard pH 11 warm water wash and may be a viable option to reduce cost, increase shelf life, and slow pathogen growth in and on shell eggs.

  3. Wash water solids removal system study

    NASA Technical Reports Server (NTRS)

    1974-01-01

    During wash water purification, surfactants tend to precipitate and foul the RO membranes, causing water flux decline and loss of salt rejection. The use of 165 to 190 ppm ferric chloride and optionally 0.25 to 1.0 ppm polymeric flocculate precipitates 92 to 96 percent of the surfactant from an Olive Leaf Soap based wash water. Crossflow filtration and pressure filtration yield good soap rejection at high water flux rates. Post-treatment of the chemically pretreated and filtered wash water with activated charcoal removes the residual soap down to an undetectable level.

  4. Development assessment of wash water reclamation

    NASA Technical Reports Server (NTRS)

    Putnam, D. F.

    1976-01-01

    An analytical study assessment of state-of-the-art wash water reclamation technology is presented. It covers all non-phase-change unit operations, unit processes and subsystems currently under development by NASA. Each approach to wash water reclamation is described in detail. Performance data are given together with the projected weights and sizes of key components and subsystems. It is concluded that a simple multifiltration subsystem composed of surface-type cartridge filters, carbon adsorption and ion exchange resins is the most attractive approach for spacecraft wash water reclamation in earth orbital missions of up to 10 years in duration.

  5. TANK 7 CHARACTERIZATION AND WASHING STUDIES

    SciTech Connect

    Lambert, D.; Pareizs, J.; Click, D.

    2010-02-04

    A 3-L PUREX sludge sample from Tank 7 was characterized and then processed through a series of inhibited water washes to remove oxalate, sodium, and other soluble ions. Current plans use Tank 7 as one of the feed sources for Sludge Batch 7 (SB7). Tank 7 is high in oxalate due to the oxalic acid cleaning of the sludge heels from Tanks 5 and 6 and subsequent transfer to Tank 7. Ten decant and nine wash cycles were performed over a 47 day period at ambient temperature. Initially, seven decants and seven washes were completed based on preliminary estimates of the number of wash cycles required to remove the oxalate in the sludge. After reviewing the composition data, SRNL recommended the completion of 2 or 3 more decant/wash cycles to ensure all of the sodium oxalate had redissolved. In the first 7 washes, the slurry oxalate concentration was 12,300 mg/kg (69.6% oxalate removal compared to 96.1% removal of the other soluble ions). After all ten decants were complete, the slurry oxalate concentration was 3,080 mg/kg (89.2% oxalate removal compared to 99.0% of the other soluble ions). The rate of dissolution of oxalate increased significantly with subsequent washes until all of the sodium oxalate had been redissolved after seven decant/wash cycles. The measured oxalate concentrations agreed very well with LWO predictions for washing of the Tank 7 sample. Highlights of the analysis and washing of the Tank 7 sample include: (1) Sodium oxalate was detected in the as-received filtered solids. 95% of the oxalate was insoluble (undissolved) in the as-received slurry. (2) No sodium oxalate was detected in the post-wash filtered solids. (3) Sodium oxalate is the last soluble species that redissolves during washing with inhibited water. In order to significantly reduce the sodium oxalate concentration, the sludge must be highly washed, leaving the other soluble anions and cations (including sodium) very low in concentration. (4) The post-wash slurry had 1% of the soluble anions

  6. Triplet p + ip pairing correlations in the doped Kane-Mele-Hubbard model: A quantum Monte Carlo study

    DOE PAGESBeta

    Ma, Tianxing; Lin, Hai-Qing; Gubernatis, James E.

    2015-09-01

    By using the constrained-phase quantum Monte Carlo method, we performed a systematic study of the pairing correlations in the ground state of the doped Kane-Mele-Hubbard model on a honeycomb lattice. We find that pairing correlations with d + id symmetry dominate close to half filling, but pairing correlations with p+ip symmetry dominate as hole doping moves the system below three-quarters filling. We correlate these behaviors of the pairing correlations with the topology of the Fermi surfaces of the non-interacting problem. We also find that the effective pairing correlation is enhanced greatly as the interaction increases, and these superconducting correlations aremore » robust against varying the spin-orbit coupling strength. Finally, our numerical results suggest a possible way to realize spin triplet superconductivity in doped honeycomb-like materials or ultracold atoms in optical traps.« less

  7. Triplet p + ip pairing correlations in the doped Kane-Mele-Hubbard model: A quantum Monte Carlo study

    NASA Astrophysics Data System (ADS)

    Ma, Tianxing; Lin, Hai-Qing; Gubernatis, J. E.

    2015-08-01

    By using the constrained-phase quantum Monte Carlo method, we performed a systematic study of the pairing correlations in the ground state of the doped Kane-Mele-Hubbard model on a honeycomb lattice. We find that pairing correlations with d + id symmetry dominate close to half-filling, but pairing correlations with p + ip symmetry dominate as hole doping moves the system below three-quarters filling. We correlate these behaviors of the pairing correlations with the topology of the Fermi surfaces of the non-interacting problem. We also find that the effective pairing correlation is enhanced greatly as the interaction increases, and these superconducting correlations are robust against varying the spin-orbit coupling strength. Our numerical results suggest a possible way to realize spin triplet superconductivity in doped honeycomb-like materials or ultracold atoms in optical traps.

  8. Wash water waste pretreatment system study

    NASA Technical Reports Server (NTRS)

    1976-01-01

    The use of real wash water had no adverse effect on soap removal when an Olive Leaf soap based system was used; 96 percent of the soap was removed using ferric chloride. Numerous chemical agents were evaluated as antifoams for synthetic wash water. Wash water surfactants used included Olive Leaf Soap, Ivory Soap, Neutrogena and Neutrogena Rain Bath Gel, Alipal CO-436, Aerosol 18, Miranol JEM, Palmeto, and Aerosol MA-80. For each type of soapy wash water evaluated, at least one antifoam capable of causing nonpersistent foam was identified. In general, the silicones and the heavy metal ions (i.e., ferric, aluminum, etc.) were the most effective antifoams. Required dosage was in the range of 50 to 200 ppm.

  9. Variable stiffness torsion springs

    NASA Technical Reports Server (NTRS)

    Alhorn, Dean C. (Inventor); Polites, Michael E. (Inventor)

    1994-01-01

    In a torsion spring the spring action is a result of the relationships between the torque applied in twisting the spring, the angle through which the torsion spring twists, and the modulus of elasticity of the spring material in shear. Torsion springs employed industrially have been strips, rods, or bars, generally termed shafts, capabable of being flexed by twisting their axes. They rely on the variations in shearing forces to furnish an internal restoring torque. In the torsion springs herein the restoring torque is external and therefore independent of the shearing modulus of elasticity of the torsion spring shaft. Also provided herein is a variable stiffness torsion spring. This torsion spring can be so adjusted as to have a given spring constant. Such variable stiffness torsion springs are extremely useful in gimballed payloads such as sensors, telescopes, and electronic devices on such platforms as a space shuttle or a space station.

  10. Variable stiffness torsion springs

    NASA Technical Reports Server (NTRS)

    Alhorn, Dean C. (Inventor); Polites, Michael E. (Inventor)

    1995-01-01

    In a torsion spring the spring action is a result of the relationships between the torque applied in twisting the spring, the angle through which the torsion spring twists, and the modulus of elasticity of the spring material in shear. Torsion springs employed industrially have been strips, rods, or bars, generally termed shafts, capabable of being flexed by twisting their axes. They rely on the variations in shearing forces to furnish an internal restoring torque. In the torsion springs herein the restoring torque is external and therefore independent of the shearing modulus of elasticity of the torsion spring shaft. Also provided herein is a variable stiffness torsion spring. This torsion spring can be so adjusted as to have a given spring constant. Such variable stiffness torsion springs are extremely useful in gimballed payloads such as sensors, telescopes, and electronic devices on such platforms as a space shuttle or a space station.

  11. Geohydrology of the Navajo sandstone in western Kane, southwestern Garfield, and southeastern Iron counties, Utah

    USGS Publications Warehouse

    Freethey, G.W.

    1988-01-01

    The upper Navajo and Lamb Point aquifers in the Navajo Sandstone are the principal source of water for the city of Kanab, irrigation, stock, and for rural homes in the study area. Well logs and outcrop descriptions indicate the Navajo Sandstone consists of the Lamb Point Tongue and an unnamed upper member that are separated by the Tenney Canyon Tongue of the Kayenta Formation. The main Kayenta Formation underlies the Lamb Point Tongue. The Lamb Point Tongue and the upper member of the Navajo Sandstone are saturated and hydraulically connected through the Tenney Canyon Tongue. Available data indicate that precipitation percolates to the groundwater reservoir where the Navajo Sandstone crops out. Estimates of the rate of recharge at the outcrop range from 0.1 to as much as 2.8 in/yr. Water level data indicate that water moves from the upper member of the Navajo Sandstone, through the Tenney Canyon Tongue, and into the Lamb Point Tongue. Lateral flow is generally from the outcrop areas toward the incised canyons formed by tributaries of Kanab Creek and Johnson Wash. Direction and rate of groundwater movement and the location and character of the natural hydrologic boundaries in the northern part of the area where the Navajo Sandstone is buried cannot be determined conclusively without additional water level data. (Author 's abstract)

  12. Hand washing promotion for preventing diarrhoea

    PubMed Central

    Ejemot-Nwadiaro, Regina I; Ehiri, John E; Arikpo, Dachi; Meremikwu, Martin M; Critchley, Julia A

    2015-01-01

    Background Diarrhoea accounts for 1.8 million deaths in children in low- and middle-income countries (LMICs). One of the identified strategies to prevent diarrhoea is hand washing. Objectives To assess the effects of hand washing promotion interventions on diarrhoeal episodes in children and adults. Search methods We searched the Cochrane Infectious Diseases Group Specialized Register (27 May 2015); CENTRAL (published in the Cochrane Library 2015, Issue 5); MEDLINE (1966 to 27 May 2015); EMBASE (1974 to 27 May 2015); LILACS (1982 to 27 May 2015); PsycINFO (1967 to 27 May 2015); Science Citation Index and Social Science Citation Index (1981 to 27 May 2015); ERIC (1966 to 27 May 2015); SPECTR (2000 to 27 May 2015); Bibliomap (1990 to 27 May 2015); RoRe, The Grey Literature (2002 to 27 May 2015); World Health Organization (WHO) International Clinical Trial Registry Platform (ICTRP), metaRegister of Controlled Trials (mRCT), and reference lists of articles up to 27 May 2015. We also contacted researchers and organizations in the field. Selection criteria Individually randomized controlled trials (RCTs) and cluster-RCTs that compared the effects of hand washing interventions on diarrhoea episodes in children and adults with no intervention. Data collection and analysis Three review authors independently assessed trial eligibility, extracted data, and assessed risk of bias. We stratified the analyses for child day-care centres or schools, community, and hospital-based settings. Where appropriate, incidence rate ratios (IRR) were pooled using the generic inverse variance method and random-effects model with 95% confidence intervals (CIs). We used the GRADE approach to assess the quality of evidence. Main results We included 22 RCTs: 12 trials from child day-care centres or schools in mainly high-income countries (54,006 participants), nine community-based trials in LMICs (15,303 participants), and one hospital-based trial among people with acquired immune deficiency

  13. 21 CFR 133.137 - Washed curd cheese for manufacturing.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 21 Food and Drugs 2 2014-04-01 2014-04-01 false Washed curd cheese for manufacturing. 133.137... Standardized Cheese and Related Products § 133.137 Washed curd cheese for manufacturing. Washed curd cheese for manufacturing conforms to the definition and standard of identity prescribed for washed curd cheese by §...

  14. 21 CFR 133.137 - Washed curd cheese for manufacturing.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 2 2010-04-01 2010-04-01 false Washed curd cheese for manufacturing. 133.137... Standardized Cheese and Related Products § 133.137 Washed curd cheese for manufacturing. Washed curd cheese for manufacturing conforms to the definition and standard of identity prescribed for washed curd cheese by §...

  15. 21 CFR 133.137 - Washed curd cheese for manufacturing.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 21 Food and Drugs 2 2011-04-01 2011-04-01 false Washed curd cheese for manufacturing. 133.137... Standardized Cheese and Related Products § 133.137 Washed curd cheese for manufacturing. Washed curd cheese for manufacturing conforms to the definition and standard of identity prescribed for washed curd cheese by §...

  16. 21 CFR 133.137 - Washed curd cheese for manufacturing.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 21 Food and Drugs 2 2012-04-01 2012-04-01 false Washed curd cheese for manufacturing. 133.137... Standardized Cheese and Related Products § 133.137 Washed curd cheese for manufacturing. Washed curd cheese for manufacturing conforms to the definition and standard of identity prescribed for washed curd cheese by §...

  17. 21 CFR 133.137 - Washed curd cheese for manufacturing.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 21 Food and Drugs 2 2013-04-01 2013-04-01 false Washed curd cheese for manufacturing. 133.137... Standardized Cheese and Related Products § 133.137 Washed curd cheese for manufacturing. Washed curd cheese for manufacturing conforms to the definition and standard of identity prescribed for washed curd cheese by §...

  18. 30 CFR 1206.260 - Allocation of washed coal.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 30 Mineral Resources 3 2014-07-01 2014-07-01 false Allocation of washed coal. 1206.260 Section... RESOURCES REVENUE PRODUCT VALUATION Federal Coal § 1206.260 Allocation of washed coal. (a) When coal is subjected to washing, the washed coal must be allocated to the leases from which it was extracted. (b)...

  19. 30 CFR 1206.260 - Allocation of washed coal.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 30 Mineral Resources 3 2012-07-01 2012-07-01 false Allocation of washed coal. 1206.260 Section... RESOURCES REVENUE PRODUCT VALUATION Federal Coal § 1206.260 Allocation of washed coal. (a) When coal is subjected to washing, the washed coal must be allocated to the leases from which it was extracted. (b)...

  20. 30 CFR 1206.459 - Allocation of washed coal.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 30 Mineral Resources 3 2014-07-01 2014-07-01 false Allocation of washed coal. 1206.459 Section... RESOURCES REVENUE PRODUCT VALUATION Indian Coal § 1206.459 Allocation of washed coal. (a) When coal is subjected to washing, the washed coal must be allocated to the leases from which it was extracted. (b)...

  1. 30 CFR 1206.260 - Allocation of washed coal.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 30 Mineral Resources 3 2013-07-01 2013-07-01 false Allocation of washed coal. 1206.260 Section... RESOURCES REVENUE PRODUCT VALUATION Federal Coal § 1206.260 Allocation of washed coal. (a) When coal is subjected to washing, the washed coal must be allocated to the leases from which it was extracted. (b)...

  2. 30 CFR 1206.459 - Allocation of washed coal.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 30 Mineral Resources 3 2013-07-01 2013-07-01 false Allocation of washed coal. 1206.459 Section... RESOURCES REVENUE PRODUCT VALUATION Indian Coal § 1206.459 Allocation of washed coal. (a) When coal is subjected to washing, the washed coal must be allocated to the leases from which it was extracted. (b)...

  3. 30 CFR 1206.459 - Allocation of washed coal.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 30 Mineral Resources 3 2011-07-01 2011-07-01 false Allocation of washed coal. 1206.459 Section... INTERIOR Natural Resources Revenue PRODUCT VALUATION Indian Coal § 1206.459 Allocation of washed coal. (a) When coal is subjected to washing, the washed coal must be allocated to the leases from which it...

  4. 30 CFR 1206.260 - Allocation of washed coal.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 30 Mineral Resources 3 2011-07-01 2011-07-01 false Allocation of washed coal. 1206.260 Section... INTERIOR Natural Resources Revenue PRODUCT VALUATION Federal Coal § 1206.260 Allocation of washed coal. (a) When coal is subjected to washing, the washed coal must be allocated to the leases from which it...

  5. 30 CFR 206.459 - Allocation of washed coal.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 30 Mineral Resources 2 2010-07-01 2010-07-01 false Allocation of washed coal. 206.459 Section 206... MANAGEMENT PRODUCT VALUATION Indian Coal § 206.459 Allocation of washed coal. (a) When coal is subjected to washing, the washed coal must be allocated to the leases from which it was extracted. (b) When the...

  6. 30 CFR 1206.459 - Allocation of washed coal.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 30 Mineral Resources 3 2012-07-01 2012-07-01 false Allocation of washed coal. 1206.459 Section... RESOURCES REVENUE PRODUCT VALUATION Indian Coal § 1206.459 Allocation of washed coal. (a) When coal is subjected to washing, the washed coal must be allocated to the leases from which it was extracted. (b)...

  7. 30 CFR 206.260 - Allocation of washed coal.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 30 Mineral Resources 2 2010-07-01 2010-07-01 false Allocation of washed coal. 206.260 Section 206... MANAGEMENT PRODUCT VALUATION Federal Coal § 206.260 Allocation of washed coal. (a) When coal is subjected to washing, the washed coal must be allocated to the leases from which it was extracted. (b) When the...

  8. Soil washing enhancement with solid sorbents

    SciTech Connect

    El-Shoubary, Y.M.; Woodmansee, D.E.

    1996-12-31

    Soil washing is a dynamic, physical process that remediates contaminated soil through two mechanisms: particle size separation and transfer of the contaminant into the (mostly) liquid stream. The performance of different sorbents and additives to remove motor oil from sea sand was tested. Hydrocyclone, attrition scrubber, and froth flotation equipment were used for the decontamination study. Sorbents and additives were mixed with soils in the attrition scrubber prior to flotation. Sorbents used were granular activated carbon, powder activated carbon, and rubber tires. Chemical additives used were calcium hydroxide, sodium carbonate, Alconox{reg_sign}, Triton{reg_sign} X-100 and Triton{reg_sign} X-114. When a froth flotation run was performed using no additive, washed soils {open_quotes}tails{close_quotes} contained 4000 ppm of total oil and grease (TOG). However, when carbon or rubber (6% by weight) was added to the contaminated soils the washed soils {open_quotes}tails{close_quotes} contained 4000 ppm of total oil and grease (TOG). The addition of sodium carbonate or calcium hydroxide (6% by weight) had same effects as sorbents. In both cases washed soil {open_quotes}tails{close_quotes} contained total oil and grease of less than 1000 ppm. The use of these non-hazardous additives or sorbent can enhance the soil washing process and consequently saves on time (residence time in equipment design) required to achieve the target clean up levels. 18 refs., 12 figs.

  9. Washing of waste prior to landfilling.

    PubMed

    Cossu, Raffaello; Lai, Tiziana

    2012-05-01

    The main impact produced by landfills is represented by the release of leachate emissions. Waste washing treatment has been investigated to evaluate its efficiency in reducing the waste leaching fraction prior to landfilling. The results of laboratory-scale washing tests applied to several significant residues from integrated management of solid waste are presented in this study, specifically: non-recyclable plastics from source separation, mechanical-biological treated municipal solid waste and a special waste, automotive shredded residues. Results obtained demonstrate that washing treatment contributes towards combating the environmental impacts of raw wastes. Accordingly, a leachate production model was applied, leading to the consideration that the concentrations of chemical oxygen demand (COD) and total Kjeldahl nitrogen (TKN), parameters of fundamental importance in the characterization of landfill leachate, from a landfill containing washed wastes, are comparable to those that would only be reached between 90 and 220years later in the presence of raw wastes. The findings obtained demonstrated that washing of waste may represent an effective means of reducing the leachable fraction resulting in a consequent decrease in landfill emissions. Further studies on pilot scale are needed to assess the potential for full-scale application of this treatment.

  10. Washing of waste prior to landfilling.

    PubMed

    Cossu, Raffaello; Lai, Tiziana

    2012-05-01

    The main impact produced by landfills is represented by the release of leachate emissions. Waste washing treatment has been investigated to evaluate its efficiency in reducing the waste leaching fraction prior to landfilling. The results of laboratory-scale washing tests applied to several significant residues from integrated management of solid waste are presented in this study, specifically: non-recyclable plastics from source separation, mechanical-biological treated municipal solid waste and a special waste, automotive shredded residues. Results obtained demonstrate that washing treatment contributes towards combating the environmental impacts of raw wastes. Accordingly, a leachate production model was applied, leading to the consideration that the concentrations of chemical oxygen demand (COD) and total Kjeldahl nitrogen (TKN), parameters of fundamental importance in the characterization of landfill leachate, from a landfill containing washed wastes, are comparable to those that would only be reached between 90 and 220years later in the presence of raw wastes. The findings obtained demonstrated that washing of waste may represent an effective means of reducing the leachable fraction resulting in a consequent decrease in landfill emissions. Further studies on pilot scale are needed to assess the potential for full-scale application of this treatment. PMID:22245736

  11. Aqueous Geochemistry of the Pueblo Colorado Wash Aquifer

    NASA Astrophysics Data System (ADS)

    Pandamouz, A.; Ort, M. H.; Breit, G. N.; Hiza, M.; Parnell, R. A.

    2005-12-01

    Pueblo Colorado Wash alluvial aquifer, located in northeastern Arizona on the Navajo Nation, is about 20 km long and 2-5 km wide and formed by infilling a canyon as deep as 70 m in Mesozoic and Tertiary sedimentary rocks. This aquifer is the main source of drinking water for many Navajo communities. The composition of shallow water (<20 m) in the aquifer contrasts with that from deeper parts. The shallower water is distinguished by low specific conductance (<1 mS cm-1) and higher dissolved oxygen, while the deeper parts have a wide range of values for specific conductance (<1-22 mS cm-1) and low dissolved oxygen. Some wells (deeper water) are sulfate dominant whilst most springs and shallow wells (shallow water) are bicarbonate dominant. A comparison of two datasets-one from 1960's, and the other from the current study started in 2004-shows that the concentration of ions, such as Cl- and SO42-, in the water from some wells is much higher in samples taken in 2004. High concentrations of SO42-, Cl-, F- , K+, Ca2+, Na+, and Mg2+ in different wells and springs follow no apparent spatial trends. δ 13C data have a wide range, from -3.4 in shallow water to -11.7 in deep water. The low δ 13C values along with the high dissolved Fe, Mn, and Ba in some wells and springs are consistent with microbial respiration in the aquifer. The δ 18O and δ D show that the shallow water has experienced varying amounts of evaporation. The differences in water composition reflect the heterogeneity in the alluvium and older formations surrounding the aquifer, and the role of water-sediment interactions in the water composition. Temporal increases in salinity are attributed to decreased rainfall and increased withdrawal of water for domestic supplies. Results highlight the sensitivity of water quality in small aquifers to climate shifts and development.

  12. Comparison of the microflora on organically and conventionally grown spring mix from a California processor.

    PubMed

    Phillips, Christie A; Harrison, Mark A

    2005-06-01

    Considerable speculation has occurred concerning the potential for higher numbers of foodborne pathogens on organically grown produce compared with produce not grown organically. The microflora composition of spring mix or mesclun, a mixture of multiple salad ingredients, grown either by organic or conventional means was determined. Unwashed or washed spring mix was obtained from a commercial California fresh-cut produce processor who does not use manure in their cultivation practices. Fifty-four samples of each type of product were supplied over a 4-month period. Analysis included enumeration of total mesophiles, psychrotrophs, coliforms, generic Escherichia coli, lactic acid bacteria, yeasts, and molds. In addition, spring mix was analyzed for the presence of Salmonella and Listeria monocytogenes. The mean populations of mesophilic and psychrotrophic bacteria, yeasts, molds, lactic acid bacteria, and coliforms on conventionally grown spring mix were not statistically different (P > 0.05) from respective mean populations on organically grown spring mix. The mean population of each microbial group was significantly higher on unwashed spring mix compared with the washed product. Of the 14 samples found to contain E. coli, eight were from nonwashed conventional spring mix, one was from washed conventional spring mix, and four were from nonwashed organic spring mix. Salmonella and L. monocytogenes were not detected in any of the samples analyzed.

  13. Investigation of a marine magnetic polarity reversal boundary in cross section at the northern boundary of the Kane Megamullion, Mid-Atlantic Ridge, 23°40'N

    NASA Astrophysics Data System (ADS)

    Xu, Min; Tivey, M. A.

    2016-05-01

    Near-bottom magnetic field measurements made by the submersible Nautile during the 1992 Kanaut Expedition define the cross-sectional geometry of magnetic polarity reversal boundaries and the vertical variation of crustal magnetization in lower oceanic crust exposed along the Kane Transform Fault (TF) at the northern boundary of the Kane Megamullion (KMM). The KMM exposes lower crust and upper mantle rocks on a low-angle normal fault that was active between 3.3 Ma and 2.1 Ma. The geometry of the polarity boundaries is estimated from an inversion of the submarine magnetic data for crustal magnetization. In general, the polarity boundaries dip away from the ridge axis along the Kane TF scarp, with a west dipping angle of ~45° in the shallow (<1 km) crust and <20° in the deeper crust. The existence of the magnetic polarity boundaries (e.g., C2r.2r/C2An.1n, ~2.581 Ma) indicates that the lower crustal gabbros and upper mantle serpentinized peridotites are able to record a coherent magnetic signal. Our results support the conclusion of Williams (2007) that the lower crust cools through the Curie temperature of magnetite to become magnetic, with the polarity boundaries representing both frozen isotherms and isochrons. We also test the effects of the rotation of this isotherm structure and/or footwall rotation and find that the magnetic polarity boundary geometry is not sensitive to these directional changes.

  14. Superfund Record of Decision (EPA Region 3): Kane and Lombard Site, Baltimore, Maryland (first remedial action), September 1987. Final report

    SciTech Connect

    Not Available

    1987-09-30

    The Kane and Lombard site is an 8.4-acre parcel of undeveloped land in Baltimore, Maryland. Dumping and burning of construction debris, domestic trash, and drums occurred at the site from 1962 until 1967 when the city passed an ordinance prohibiting the open burning of refuse. Illegal dumping continued from 1967 until approximately 1984, during which time many citations were issued for illegal burning on the property. In 1980, Maryland State inspectors observed between 400 and 500 drums, the majority of which were rusted, damaged and contained holes. Following an onsite property assessment, EPA authorized the immediate removal of 1,163 drums in 1984. Of those, 822 drums were classified as empty and 341 drums contained contaminants which included: benzene, toluene, xylene, PAHs, PCBs, and heavy metals. Approximately six inches of soil below the drums were removed and disposed offsite. The site was stabilized by regrading, capping and revegetation. Currently, soil and ground water are contaminated with these prior drum contaminants.

  15. A "Kane's Dynamics" Model for the Active Rack Isolation System. Part 3; Addition of Umbilicals to the Nonlinear Model

    NASA Technical Reports Server (NTRS)

    Rupert, J. K.; Hampton, R. D.; Beech, G. S.

    2005-01-01

    In the late 1980s, microgravity researchers began to voice their concern that umbilical-transmitted energy could significantly degrade the acceleration environment of microgravity space science experiments onboard manned spacecraft. Since umbilicals are necessary for many experiments, control designers began to seek ways to compensate for these "indirect" disturbances. Hampton, et al., used the Kane s method to develop a model of the active rack isolation system (ARIS) that includes (1) actuator control forces, (2) direct disturbance forces, and (3) indirect, actuator-transmitted disturbances. Their model does not, however, include the indirect, umbilical-transmitted disturbances. Since the umbilical stiffnesses are not negligible, these indirect disturbances must be included in the model. Until the umbilicals have been appropriately included, the model will be incomplete. This Technical Memorandum presents a nonlinear model of ARIS with umbilicals included. Model verification was achieved by utilizing two commercial-off-the-shelf software tools. Various forces and moments were applied to the model to yield simulated responses of the system. Plots of the simulation results show how various critical points on an ARIS-outfitted international standard payload rack behave under the application of direct disturbances, indirect disturbances, and control forces. Simulations also show system response to a variety of initial conditions.

  16. A "Kane's Dynamics" Model for the Active Rack Isolation System Part Two: Nonlinear Model Development, Verification, and Simplification

    NASA Technical Reports Server (NTRS)

    Beech, G. S.; Hampton, R. D.; Rupert, J. K.

    2004-01-01

    Many microgravity space-science experiments require vibratory acceleration levels that are unachievable without active isolation. The Boeing Corporation's active rack isolation system (ARIS) employs a novel combination of magnetic actuation and mechanical linkages to address these isolation requirements on the International Space Station. Effective model-based vibration isolation requires: (1) An isolation device, (2) an adequate dynamic; i.e., mathematical, model of that isolator, and (3) a suitable, corresponding controller. This Technical Memorandum documents the validation of that high-fidelity dynamic model of ARIS. The verification of this dynamics model was achieved by utilizing two commercial off-the-shelf (COTS) software tools: Deneb's ENVISION(registered trademark), and Online Dynamics Autolev(trademark). ENVISION is a robotics software package developed for the automotive industry that employs three-dimensional computer-aided design models to facilitate both forward and inverse kinematics analyses. Autolev is a DOS-based interpreter designed, in general, to solve vector-based mathematical problems and specifically to solve dynamics problems using Kane's method. The simplification of this model was achieved using the small-angle theorem for the joint angle of the ARIS actuators. This simplification has a profound effect on the overall complexity of the closed-form solution while yielding a closed-form solution easily employed using COTS control hardware.

  17. What Happens at a Car Wash?

    ERIC Educational Resources Information Center

    Gallick, Barbara; Lee, Lisa

    2010-01-01

    A class of 3- to 5-year-old children in a child care center in the midwestern United States chose to study a car wash as a group project. This article discusses how the project evolved, describes the three phases of the project, and provides the teachers' reflections on the project. Photos taken during the project and children's sketches are…

  18. An Alternative Antimicrobial Commercial Egg Washing Procedure

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Presently, commercial eggs are washed with water containing an alkali detergent at approximately pH 11 followed by a chlorine rinse. At this pH, it is likely that there is little, if any, free chlorine in the final rinse to act as an antimicrobial against pathogens like Salmonella. Using a chlorine ...

  19. SOIL-WASHING TECHNOLOGY AND PRACTICE

    EPA Science Inventory

    Soil washing in the United States has been studied and evaluated with increasing thoroughness during the last 15 to 20 years. It is now entering a phase of actual use and acceptance as its applicability and economics become clearer. This paper reviews the principles behind soil...

  20. Washing of the AW-101 entrained solids

    SciTech Connect

    GJ Lumetta

    2000-03-31

    BNFL Inc. (BNFL) is under contract with the US Department of Energy, River Protection Project (DOE-RPP) to design, construct, and operate facilities for treating wastes stored in the single-shell and double-shell tanks at the Hanford Site, Richland, Washington. The DOE-BNFL RPP contract identifies two feeds to the waste treatment plant: (1) primarily liquid low-activity waste (LAW) consisting of less than 2 wt% entrained solids and (2) high-level waste (HLW) consisting of 10 to 200 g/L solids slurry. This report describes the results of a test conducted by Battelle to assess the effects of inhibited water washing on the composition of the entrained solids in the diluted AW-101 low-activity waste (LAW) sample. The objective of this work was to gather data on the solubility of the AW-101 entrained solids in 0.01 M NaOH, so that BNFL can evaluate whether these solids require caustic leaching. The work was conducted according to test plan BNFL-TP-29953-9, Rev. 0, LAW Entrained Solids Water Wash and Caustic Leach Testing. The test went according to plan, with no deviations from the test plan. Based on the results of the 0.01 M NaOH washing, a decision was made by BNFL to not proceed with the caustic leaching test. The composition of the washed solids was such that caustic leaching would not result in significant reduction in the immobilized HLW volume.

  1. DEMONSTRATION BULLETIN: SOIL WASHING SYSTEM - BIOTROL, INC.

    EPA Science Inventory

    The three component technologies of the BioTrol Soil Washing System (BSWS). Tested in the SITE demonstration were a Soil Washer (SW), and Aqueous Treatment System (ATS), and a Slurry Bio-Reactor (SBR). The Soil Washer operates on the principle that a significant fraction of the...

  2. DEMONSTRATION BULLETIN: BIOGENESIS SOIL WASHING TECHNOLOGY - BIOGENESIS

    EPA Science Inventory

    The BioGenesisSM soil washing technology was developed by BioGenesis Enterprises, Inc. to remove organic compounds from soil. The technology uses a proprietary solution (BioGenesisSM cleaner) to transfer organic compounds from the soil matrix to a liquid phase. BioGenesis claims...

  3. EVALUATION OF THE BIOGENESIS SOIL WASHING TECHNOLOGY

    EPA Science Inventory

    The BioGenesis Enterprises, Inc. (BioGenesis) soil washing technology was demonstrated as part of the US Environmental Protection Agency's (EPA) Superfund Innovative Technology Evaluation (SITE) program in November 1992. The demonstration was conducted over three days at a petrol...

  4. Prototype wash water renovation system integration with government-furnished wash fixture

    NASA Technical Reports Server (NTRS)

    1984-01-01

    The requirements of a significant quantity of proposed life sciences experiments in Shuttle payloads for available wash water to support cleansing operations has provided the incentive to develop a technique for wash water renovation. A prototype wash water waste renovation system which has the capability to process the waste water and return it to a state adequate for reuse in a typical cleansing fixture designed to support life science experiments was investigated. The resulting technology is to support other developments efforts pertaining to water reclamation by serving as a pretreatment step for subsequent reclamation procedures.

  5. A Novel Glycinate-based Body Wash

    PubMed Central

    Regan, Jamie; Ananthapadmanabhan, K.P.

    2013-01-01

    Objective: To assess the properties of a novel body wash containing the mild surfactant glycinate. Design: Biochemical and clinical assays. Setting: Research laboratories and clinical sites in the United States and Canada. Participants: Women 18 to 65 years of age (cleansing efficacy); male and female subjects 26 to 63 years of age with mild or moderate dryness and erythema (leg-controlled application test); subjects 5 to 65 years of age with mild-to-moderate eczema (eczema compatibility); and women 18 to 64 years of age (home use). Measurements: Assessments across studies included colorimetric dye exclusion to assess skin damage potential (corneosurfametry), efficacy of cosmetic product removal from skin, change from baseline in visual dryness, change from baseline in Eczema Area and Severity Index, and self-perceived eczema attributes and self-reported product preference. Results: The glycinate-based cleanser demonstrated mildness to skin components when evaluated in a corneosurfametry assay. Short-term use under exaggerated wash conditions in subjects with dryness scores <3 and erythema scores <2 (both on a 0-6 scale) indicated an initial reduction in visual dryness. In subjects with eczema, normal use resulted in significant improvements (p<0.05) at Week 4 compared with baseline in skin dryness (change from baseline = −0.73), rash (−0.56), itch (−0.927), tightness (−0.585), and all eczema (−0.756). The glycinate-based body wash removed 56 percent of a long-lasting cosmetic foundation from skin compared with less than 30 percent removed by two competitive products tested. The glycinate-based body wash was preferred over a competitive mild cleansing product overall. Conclusion: The patented glycinate-containing body wash demonstrated better product mildness and patient-preferred attributes and clinical benefits. PMID:23882306

  6. Simulation of flow in the unsaturated zone beneath Pagany Wash, Yucca Mountain

    SciTech Connect

    Thamir, F.; Kwicklis, E.M.; Hampson, D.; Anderton, S.

    1994-12-31

    A one-dimensional numerical model was created simulate water movement beneath Pagany Wash, Yucca Mountain, Nevada. Model stratigraphy and properties were on data obtained from boreholes UE-25 UZ {number_sign}4 UE-25 UZ {number_sign}5, which were drilled in the alluvial channel and bedrock sideslope of Pagany Wash. Although unable to account for multidimensional or preferential flowpaths beneath the wash, the model proved a useful conceptual tool with which to develop hypotheses and, in some cases, provide bounding calculations. The model indicated that liquid flux decreases with depth in the upper 120 m beneath the wash, with fluxes of several tens mm/yr in the nonwelded base of the Tiva Canyon Member and fluxes on the order of a tenth mm/yr in the upper Topopah Spring Member. Capillary barrier effects were indicated by the model to significantly delay the entry of large fluxes into the potential repository horizon during periods of increasing net infiltration, and to inhibit rapid drainage of water from the nonwelded and bedded intervals into the potential repository horizon during periods of moisture redistribution. Lateral moisture redistribution can be expected to be promoted by these effects.

  7. Simulation of flow in the unsaturated zone beneath Pagany Wash, Yucca Mountain

    SciTech Connect

    Kwicklis, E.M.; Healy, R.W.; Flint, A.L.

    1994-12-31

    A one-dimensional numerical model was created to simulate water movement beneath Pagany Wash, Yucca Mountain, Nevada. Model stratigraphy and properties were based on data obtained from boreholes UE-25 UZ No. 4 and UE-25 UZ No. 5, which was drilled in the alluvial channel and bedrock sideslope of Pagany Wash. Although unable to account for multidimensional or preferential flowpaths beneath the wash, the model proved a useful conceptual tool with which to develop hypotheses and, in some cases, provide bounding calculations. The model indicated that liquid flux decreases with depth in the upper 120 m beneath the wash, with fluxes of several tens mm/yr in the nonwelded base of the Tiva Canyon Member and fluxes on the order of a tenth mm/yr in the upper Topopah Spring Member. Capillary barrier effects were indicated by the model to significantly delay the entry of large fluxes into the potential repository horizon during periods of increasing net infiltration, and to inhibit rapid drainage of water from the nonwelded and bedded intervals into the potential repository horizon during periods of moisture redistribution. Lateral moisture redistribution can be expected to be promoted by these effects.

  8. Preliminary gravity and magnetic models across Midway Valley and Yucca Wash, Yucca Mountain, Nevada

    SciTech Connect

    Ponce, D.A.; Langenheim, V.E.

    1994-12-31

    Detailed gravity and ground magnetic data collected along ten traverses across Midway Valley and Yucca Wash on the eastern flank of Yucca Mountain in southwest Nevada are interpreted. These data were collected as part of an effort to evaluate faulting in the vicinity of proposed surface facilities for a potential nuclear waste repository at Yucca Mountain. Geophysical data show that Midway Valley is bounded by large gravity and magnetic anomalies associated with the Bow Ridge and Paintbrush Canyon faults, on the west side of Exile Hill and on the west flank of Fran Ridge, respectively. In addition, Midway Valley itself is characterized by a number of small-amplitude anomalies that probably reflect small-scale faulting beneath Midway Valley. Gravity and magnetic data across the northwest trending Yucca Wash and the inferred Yucca Wash fault indicate no major vertical offsets greater than 100 m using a density contrast of 0.2 to 0.3 g/cm{sup 3} along the proposed Yucca Wash fault. In addition, a broad magnetic high coincides with the approximate location of the hydrologic gradient and probably reflects moderately magnetic Topopah Spring Tuff or lavas in the Calico Hills Formation.

  9. BLAISDELL SLOW SAND FILTER WASHING MACHINE. VIEW LOOKING SOUTHWEST. ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    BLAISDELL SLOW SAND FILTER WASHING MACHINE. VIEW LOOKING SOUTHWEST. - Yuma Main Street Water Treatment Plant, Blaisdell Slow Sand Filter Washing Machine, Jones Street at foot of Main Street, Yuma, Yuma County, AZ

  10. 6. GENE WASH DAM, LOOKING NORTHWEST. SURVEY REFLECTOR IN FOREGROUND ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    6. GENE WASH DAM, LOOKING NORTHWEST. SURVEY REFLECTOR IN FOREGROUND FOR MONITORING MOVEMENT OF DAM AND EARTH. - Gene Wash Reservoir & Dam, 2 miles west of Parker Dam, Parker Dam, San Bernardino County, CA

  11. 4. AERIAL VIEW OF GENE WASH RESERVOIR AND GENE CAMP ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    4. AERIAL VIEW OF GENE WASH RESERVOIR AND GENE CAMP LOOKING SOUTHWEST. DAM AND SPILLWAY VISIBLE IN BOTTOM OF PHOTO. - Gene Wash Reservoir & Dam, 2 miles west of Parker Dam, Parker Dam, San Bernardino County, CA

  12. Salt Wash Field, Grand Country, Utah

    SciTech Connect

    Morgan, C.D. )

    1993-08-01

    The Salt Wash field is located 15 miles southeast of Green River, Utah, in the Paradox fold and fault belt. The field was discovered in 1961 and has produced over 1.3 million bbl of oil and 11.6 billion ft[sup 3] of gas from the Mississippian Leadville LImestone. The average surface elevation is 4389 ft above sea level, and the depth to the top of the oil production is form 8500 to 8914 ft. Salt Wash field is an anticline with over 200 ft of closure on top of the Leadville. The producing zone is in the lower Leadville with intercrystalline and vuggy porosity developed in limestone and crystalline dolomitic limestone. The produced oil is a 50 to 53 API gravity crude with a 40[degrees]F pour point. The gas, a mixture of two sources, is predominately nitrogen (>70[sup [approximately

  13. A new technique for bladder washing.

    PubMed

    Miller, D C; Fitkin, D L; Kropp, K A; Selman, S H

    1992-01-01

    We describe a simple adaptation of the Water Pik (Teledyne Water Pik, Fort Collins, Colorado) irrigating device which allows vigorous, direct-vision agitation of the bladder wall. Three groups of mongrel dogs were subjected to cystoscopy and either syringe barbotage, half-speed Water Pik irrigation, or full-speed Water Pik irrigation of the bladder wall. Transitional cell counts were then done on centrifuged aliquots of each bladder wash specimen. The average number of transitional cells per high-power field were similar between the control group and the syringe barbotage group (2.5 and 1.5 respectively). However, both the half-speed and the full-speed Water Pik groups demonstrated statistically higher cell counts (5.7 and 13.7) when compared to both the controls and syringe barbotage groups. We conclude that Water Pik irrigation is an effective method to increase cell yield in bladder wash specimens. PMID:1729530

  14. Water Treatment Technology - Springs.

    ERIC Educational Resources Information Center

    Ross-Harrington, Melinda; Kincaid, G. David

    One of twelve water treatment technology units, this student manual on springs provides instructional materials for two competencies. (The twelve units are designed for a continuing education training course for public water supply operators.) The competencies focus on spring basin construction and spring protection. For each competency, student…

  15. Washing of the AN-107 entrained solids

    SciTech Connect

    GJ Lumetta; FV Hoopes

    2000-03-31

    This report describes the results of a test conducted by Battelle to assess the effects of inhibited water washing on the composition of the entrained solids in the diluted AN-107 low-activity waste (LAW) sample. The objective of this work was to gather data on the solubility of the AN-107 entrained solids in 0.01 M NaOH, so that BNFL can evaluate whether these solids require caustic leaching.

  16. Continuous concentration and constant volume washing of tetraphenylborate slurries

    SciTech Connect

    Siler, J.L.

    1999-12-08

    SRTC has completed filtration testing of tetraphenylborate (TPB) slurries with and without sludge. These tests were slightly different from previous SRS tests in that they used continuous mode concentration and constant volume washing evolutions. The extent of TPB recovery during washing was measured. The resulting washed precipitate slurry, with sludge, was stored at ambient temperature and under a nitrogen-inerted atmosphere to study TPB stability. Samples of both unwashed and washed slurries were submitted for rheology measurements.

  17. 1. LOOKING NORTH, SHOWING IODINE SPRING (FOREGROUND), SALT SULPHUR SPRING ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    1. LOOKING NORTH, SHOWING IODINE SPRING (FOREGROUND), SALT SULPHUR SPRING (LEFT BACKGROUND), AND TWIN COTTAGES (UPPER RIGHT) (4 x 5 negative; 5 x 7 print) - Salt Sulpher Springs, U.S. Route 219, Salt Sulphur Springs, Monroe County, WV

  18. Interruption of shigellosis by hand washing.

    PubMed

    Khan, M U

    1982-01-01

    High attack rates, increasing resistance to antibiotics and high mortality make shigellosis a serious problem. As Shigella is associated with poor hygiene we examined the effectiveness of a simple intervention, washing hands with soap and water, in checking the spread of the disease. The study population was comprised of confirmed cases of shigellosis. These and matched controls were followed up for 10 days. Several pieces of soap and earthenware pitchers for storing water were provided to the study families and they were advised to wash their hands with soap and water after defaecation and before meals. Compliance was monitored daily by observing the size of the soap and residual water. Rectal swabs of contacts of both the groups were obtained for culture. The secondary infection rate was 10.1% in the study group and 32.4% in the control group. The secondary case (symptomatic) rate was 2.2% in the study group and 14.2% in the control group. These results suggest that hand-washing has a positive interrupting effect, even in unsanitary environments.

  19. Electrostatic precipitator having traversing collector washing mechanism

    SciTech Connect

    Bricker, J.C.; Elsbernd, C.A.

    1980-12-23

    An electrostatic precipitator air cleaner is described that includes a number of precipitator cells having spaced parallel plates for collecting dirt particles, and a vertically disposed traversing pipe-like spray header containing a number of spray nozzles for directing a spray of wash or rinse fluid onto the collecting plates in order to remove collected particles. The header is traversed horizontally across the precipitator cells by means of a trolley supported by a rail-like guide member and reciprocated between a home position and an extended position by means of a rotating elongated helical drive screw cooperating with a gear-like follower attached to the trolley, such that the rotation of the screw produces linear motion of the header. The header is connected to a source of wash or rinse fluid by means of swivel connections and a flexible conduit. An elongated flat resilient fluid impervious strip containing a longitudinal slit in sliding sealable engagement with the header is positioned between the traversing mechanism and the spray nozzles to prevent infiltration of the precipitator airstream or wash fluid into the area occupied by the traversing mechanism. The threaded follower may also be disengaged from the helical drive screw and the header moved manually to any position along its length of travel.

  20. Ceramic wash-coat for catalyst support

    SciTech Connect

    Kulkarni, Anand A.; Subramanian, Ramesh; Sabol, Stephen M.

    2012-08-14

    A wash-coat (16) for use as a support for an active catalyst species (18) and a catalytic combustor component (10) incorporating such wash-coat. The wash-coat is a solid solution of alumina or alumina-based material (Al.sub.2O.sub.3-0-3 wt % La.sub.2O.sub.3) and a further oxide exhibiting a coefficient of thermal expansion that is lower than that exhibited by alumina. The further oxide may be silicon dioxide (2-30 wt % SiO.sub.2), zirconia silicate (2-30 wt % ZrSiO.sub.4), neodymium oxide (0-4 wt %), titania (Al.sub.2O.sub.3-3-40% TiO.sub.2) or alumina-based magnesium aluminate spinel (Al.sub.2O.sub.3-25 wt % MgO) in various embodiments. The active catalyst species may be palladium and a second metal in a concentration of 10-50% of the concentration of the palladium.

  1. Bacterial Exchange in Household Washing Machines

    PubMed Central

    Callewaert, Chris; Van Nevel, Sam; Kerckhof, Frederiek-Maarten; Granitsiotis, Michael S.; Boon, Nico

    2015-01-01

    Household washing machines (WMs) launder soiled clothes and textiles, but do not sterilize them. We investigated the microbial exchange occurring in five household WMs. Samples from a new cotton T-shirt were laundered together with a normal laundry load. Analyses were performed on the influent water and the ingoing cotton samples, as well as the greywater and the washed cotton samples. The number of living bacteria was generally not lower in the WM effluent water as compared to the influent water. The laundering process caused a microbial exchange of influent water bacteria, skin-, and clothes-related bacteria and biofilm-related bacteria in the WM. A variety of biofilm-producing bacteria were enriched in the effluent after laundering, although their presence in the cotton sample was low. Nearly all bacterial genera detected on the initial cotton sample were still present in the washed cotton samples. A selection for typical skin- and clothes-related microbial species occurred in the cotton samples after laundering. Accordingly, malodour-causing microbial species might be further distributed to other clothes. The bacteria on the ingoing textiles contributed for a large part to the microbiome found in the textiles after laundering. PMID:26696989

  2. Geologic characteristics and movement of the Meadow Creek landslide, part of the Coal Hill landslide complex, western Kane County, Utah

    USGS Publications Warehouse

    Ashland, Francis X.; McDonald, Greg N.; Carney, Stephanie M.; Tabet, David E.; Johnson, Cari L.

    2010-01-01

    The Meadow Creek landslide, part of the Coal Hill landslide complex in western Kane County, Utah, is about 1.7 miles (2.7 km) wide and 1.3 miles (2.1 km) long and contains six smaller historical slides. The upper part of the Meadow Creek landslide is gently sloping and consists of displaced and back-rotated blocks of Cretaceous Dakota and Cedar Mountain Formations that form northeast- to locally east-trending ridges that are separated by sediment-filled half-grabens. The lower part of the landslide is gently to moderately sloping, locally incised, and consists of heterogeneous debris that overrides the Jurassic Carmel Formation near Meadow Creek. Monitoring using a survey-grade Global Positioning System (GPS) instrument detected movement of the southern part of the Meadow Creek landslide between October 2005 and October 2008, including movement of two of the historical slides-landslides 1 and 2. The most movement during the measurement period occurred within the limits of persistently moving landslide 1 and ranged from about 24 to 64 inches (61-163 cm). Movement of the abutting southern part of the Meadow Creek landslide ranged from approximately 6 to 10 inches (15-25 cm). State Route 9 crosses over approximately a mile (1.6 km) of the southern part of the Meadow Creek landslide, including landslide 1. The highway and its predecessor (State Route 15) have been periodically displaced and damaged by persistent movement of landslide 1. Most of the landslide characteristics, particularly its size, probable depth, and the inferred weak strength and low permeability of clay-rich gouge derived from the Dakota and Cedar Mountain Formations, are adverse to and pose significant challenges to landslide stabilization. Secondary hazards include piping-induced sinkholes along scarps and ground cracks, and debris flows and rock falls from the main-scarp escarpment.

  3. Cemented mounds and hydrothermal sediments on the detachment surface at Kane Megamullion: A new manifestation of hydrothermal venting

    NASA Astrophysics Data System (ADS)

    Tucholke, Brian E.; Humphris, Susan E.; Dick, Henry J. B.

    2013-09-01

    Long-lived detachment faults are now known to be important in tectonic evolution of slow-spreading mid-ocean ridges, and there is increasing evidence that fluid flow plays a critical role in development of detachment systems. Here we document a new manifestation of low-temperature hydrothermal venting associated with the detachment fault that formed Kane Megamullion ˜3.3-2.1 m.y. ago in the western rift-valley wall of the Mid-Atlantic Ridge. Hydrothermal effects on the detachment surface include (1) cemented mounds of igneous rock and chalk debris containing hydrothermal Mn oxides and Fe oxyhydroxides, and (2) layered deposits of similar Fe-Mn minerals ± interbedded chalks. Mounds are roughly conical, ˜1-10 m high, and contain primarily basalts with lesser gabbro, serpentinite, and polymict breccia. The layered Fe-Mn-rich sediments are flat-bedded to contorted and locally are buckled into low-relief linear or polygonal ridges. We propose that the mounds formed where hydrothermal fluids discharged through the detachment hanging wall near the active fault trace. Hydrothermal precipitates cemented hanging-wall debris and welded it to the footwall, and this debris persisted as mounds as the footwall was exhumed and surrounding unconsolidated material sloughed off the sloping detachment surface. Some of the layered Fe-Mn-rich deposits may have precipitated from fluids discharging from the hanging-wall vents, but they also precipitated from low-temperature fluids venting from the exposed footwall through overlying chalks. Observed natural disturbance and abnormally thin hydrogenous Fe-Mn crusts on some contorted, hydrothermal Fe-Mn-rich chalks on ˜2.7 Ma crust suggest diffuse venting that is geologically recent. Results of this study imply that there are significant fluid pathways through all parts of detachment systems and that low-temperature venting through fractured detachment footwalls may continue for several million years off-axis.

  4. Irreversible Wash Aid Additive for Cesium Mitigation: WARRP Demonstration

    SciTech Connect

    Kaminski, Michael

    2015-01-01

    This activity demonstrated, on a practical scale, the primary unit operations for building a containment structure for radioactive wash waters, washing down a hypothetically radioactively contaminated vehicle, collecting the hypothetically radioactive slurry waste water, filtering the hypothetically radioactive wash waters, disassembling the containment, and transporting the materials for final disposition.

  5. Application of Chinese Ink Wash Drawing in Product Design

    NASA Astrophysics Data System (ADS)

    Wang, Qin; Huang, Qiming; Qin, Chuan

    Based on the analysis of the art of Chinese Ink Wash Drawing style, then explains the purpose and meaning of the study for product design with Ink Wash Drawing, in the end combined with actual cases, describes the application of product design using Chinese Ink Wash Drawing.

  6. Springs of Florida

    USGS Publications Warehouse

    Rosenau, Jack C.; Faulkner, Glen L.; Hendry, Charles W.; Hull, Robert W.

    1977-01-01

    The first comprehensive report of Florida's springs, which contains both a story of the springs and a collection of facts about them, was published thirty years ago (Ferguson and others, 1947). Since then, much additional data on springs have been gathered and the current report, Springs of Florida, makes a wealth of information on springs available to the public. Springs of Florida, prepared by the U.S. Geological Survey in cooperation with the Bureau of Geology, Florida Department of Natural Resources, publishers, and the Bureau of Water Resources Management, Florida Department of Environmental Regulation, is intended to provide sufficient background information for a lucid understanding of the nature and occurrence of the springs in the State.

  7. Fresh produce washing aid, T-128, enhances inactivation of salmonella and pseudomonas biofilms on stainless steel in chlorinated wash solutions

    Technology Transfer Automated Retrieval System (TEKTRAN)

    The efficacy of chlorine wash solutions, with/without the washing aid, T-128, on inactivation of Salmonella and Pseudomonas populations in biofilms on stainless steel coupons was evaluated under conditions of increasing organic matter loads in the wash water. Biofilms were formed statically on stai...

  8. Spring joint with overstrain sensor

    NASA Technical Reports Server (NTRS)

    Phelps, Peter M. (Inventor); Gaither, Bryan W. (Inventor)

    2011-01-01

    A flexible joint may include a conductive compression spring and a pair of non-conductive spring cages disposed at opposite ends of the compression spring to support the compression spring. A conductive member disposed inside the compression spring may extend between the pair of spring cages. One end of the conductive member may be fixed for movement with one of the spring cages and another end of the conductive member may be fixed for movement with the other of the spring cages.

  9. Face washing promotion for preventing active trachoma

    PubMed Central

    Ejere, Henry OD; Alhassan, Mahmoud B; Rabiu, Mansur

    2015-01-01

    Background Trachoma remains a major cause of avoidable blindness among underprivileged populations in many developing countries. It is estimated that about 146 million people have active trachoma and nearly six million people are blind due to complications associated with repeat infections. Objectives The objective of this review was to assess the effects of face washing promotion for the prevention of active trachoma in endemic communities. Search methods We searched CENTRAL (which contains the Cochrane Eyes and Vision Group Trials Register) (2015, Issue 1), Ovid MEDLINE, Ovid MEDLINE In-Process and Other Non-Indexed Citations, Ovid MEDLINE Daily, Ovid OLDMEDLINE (January 1946 to January 2015), EMBASE (January 1980 to January 2015), PubMed (January 1948 to January 2015), Latin American and Caribbean Health Sciences Literature Database (LILACS) (January 1982 to January 2015), the metaRegister of Controlled Trials (mRCT) (www.controlled-trials.com) (accessed 10 January 2014), ClinicalTrials.gov (www.clinicaltrials.gov) and the World Health Organization (WHO) International Clinical Trials Registry Platform (ICTRP) (www.who.int/ictrp/search/en). We did not use any date or language restrictions in the electronic searches for trials. We last searched the electronic databases on 26 January 2015. To identify further relevant trials we checked the reference lists of the included trials. Also, we used the Science Citation Index to search for references to publications that cited the trials included in the review. We contacted investigators and experts in the field to identify additional trials. Selection criteria We included randomized controlled trials (RCTs) or quasi-RCTs that compared face washing with no treatment or face washing combined with antibiotics against antibiotics alone. Trial participants were residents of endemic trachoma communities. Data collection and analysis Two review authors independently extracted data and assessed trial quality. We contacted trial

  10. Hand washing promotion for preventing diarrhoea

    PubMed Central

    Ejemot-Nwadiaro, Regina I; Ehiri, John E; Arikpo, Dachi; Meremikwu, Martin M; Critchley, Julia A

    2015-01-01

    Background Diarrhoea accounts for 1.8 million deaths in children in low- and middle-income countries (LMICs). One of the identified strategies to prevent diarrhoea is hand washing. Objectives To assess the effects of hand washing promotion interventions on diarrhoeal episodes in children and adults. Search methods We searched the Cochrane Infectious Diseases Group Specialized Register (27 May 2015); CENTRAL (published in the Cochrane Library 2015, Issue 5); MEDLINE (1966 to 27 May 2015); EMBASE (1974 to 27 May 2015); LILACS (1982 to 27 May 2015); PsycINFO (1967 to 27 May 2015); Science Citation Index and Social Science Citation Index (1981 to 27 May 2015); ERIC (1966 to 27 May 2015); SPECTR (2000 to 27 May 2015); Bibliomap (1990 to 27 May 2015); RoRe, The Grey Literature (2002 to 27 May 2015); World Health Organization (WHO) International Clinical Trial Registry Platform (ICTRP), metaRegister of Controlled Trials (mRCT), and reference lists of articles up to 27 May 2015. We also contacted researchers and organizations in the field. Selection criteria Individually randomized controlled trials (RCTs) and cluster-RCTs that compared the effects of hand washing interventions on diarrhoea episodes in children and adults with no intervention. Data collection and analysis Three review authors independently assessed trial eligibility, extracted data, and assessed risk of bias. We stratified the analyses for child day-care centres or schools, community, and hospital-based settings. Where appropriate, incidence rate ratios (IRR) were pooled using the generic inverse variance method and random-effects model with 95% confidence intervals (CIs). We used the GRADE approach to assess the quality of evidence. Main results We included 22 RCTs: 12 trials from child day-care centres or schools in mainly high-income countries (54,006 participants), nine community-based trials in LMICs (15,303 participants), and one hospital-based trial among people with acquired immune deficiency

  11. Standing surface acoustic wave (SSAW)-based cell washing

    PubMed Central

    Li, Sixing; Ding, Xiaoyun; Mao, Zhangming; Chen, Yuchao; Nama, Nitesh; Guo, Feng; Li, Peng; Wang, Lin; Cameron, Craig E.; Huang, Tony Jun

    2014-01-01

    Cell/bead washing is an indispensable sample preparation procedure used in various cell studies and analytical processes. In this article, we report a standing surface acoustic wave (SSAW)-based microfluidic device for cell and bead washing in a continuous flow. In our approach, the acoustic radiation force generated in a SSAW field is utilized to actively extract cells or beads from their original medium. A unique configuration of tilted-angle standing surface acoustic wave (taSSAW) is employed in our device, enabling us to wash beads with >98% recovery rate and >97% washing efficiency. We also demonstrate the functionality of our device by preparing high-purity (>97%) white blood cells from lysed blood samples through cell washing. Our SSAW-based cell/bead washing device has the advantages of label-free manipulation, simplicity, high biocompatibility, high recovery rate, and high washing efficiency. It can be useful for many lab-on-a-chip applications. PMID:25372273

  12. Washed cell salvage in surgical patients

    PubMed Central

    Meybohm, Patrick; Choorapoikayil, Suma; Wessels, Anke; Herrmann, Eva; Zacharowski, Kai; Spahn, Donat R.

    2016-01-01

    Abstract Background: Cell salvage is commonly used as part of a blood conservation strategy. However concerns among clinicians exist about the efficacy of transfusion of washed cell salvage. Methods: We performed a meta-analysis of randomized controlled trials in which patients, scheduled for all types of surgery, were randomized to washed cell salvage or to a control group with no cell salvage. Data were independently extracted, risk ratio (RR), and weighted mean differences (WMD) with 95% confidence intervals (CIs) were calculated. Data were pooled using a random effects model. The primary endpoint was the number of patients exposed to allogeneic red blood cell (RBC) transfusion. Results: Out of 1140 search results, a total of 47 trials were included. Overall, the use of washed cell salvage reduced the rate of exposure to allogeneic RBC transfusion by a relative 39% (RR = 0.61; 95% CI 0.57 to 0.65; P < 0.001), resulting in an average saving of 0.20 units of allogeneic RBC per patient (weighted mean differences [WMD] = −0.20; 95% CI −0.22 to −0.18; P < 0.001), reduced risk of infection by 28% (RR = 0.72; 95% CI 0.54 to 0.97; P = 0.03), reduced length of hospital stay by 2.31 days (WMD = −2.31; 95% CI −2.50 to −2.11; P < 0.001), but did not significantly affect risk of mortality (RR = 0.92; 95% CI 0.63 to 1.34; P = 0.66). No statistical difference could be observed in the number of patients exposed to re-operation, plasma, platelets, or rate of myocardial infarction and stroke. Conclusions: Washed cell salvage is efficacious in reducing the need for allogeneic RBC transfusion and risk of infection in surgery. PMID:27495095

  13. TANK 4 CHARACTERIZATION, SETTLING, AND WASHING STUDIES

    SciTech Connect

    Bannochie, C.; Pareizs, J.; Click, D.; Zamecnik, J.

    2009-09-29

    A sample of PUREX sludge from Tank 4 was characterized, and subsequently combined with a Tank 51 sample (Tank 51-E1) received following Al dissolution, but prior to a supernate decant by the Tank Farm, to perform a settling and washing study to support Sludge Batch 6 preparation. The sludge source for the majority of the Tank 51-E1 sample is Tank 12 HM sludge. The Tank 51-E1 sample was decanted by SRNL prior to use in the settling and washing study. The Tank 4 sample was analyzed for chemical composition including noble metals. The characterization of the Tank 51-E1 sample, used here in combination with the Tank 4 sample, was reported previously. SRNL analyses on Tank 4 were requested by Liquid Waste Engineering (LWE) via Technical Task Request (TTR) HLE-TTR-2009-103. The sample preparation work is governed by Task Technical and Quality Assurance Plan (TTQAP), and analyses were controlled by an Analytical Study Plan and modifications received via customer communications. Additional scope included a request for a settling study of decanted Tank 51-E1 and a blend of decanted Tank 51-E1 and Tank 4, as well as a washing study to look into the fate of undissolved sulfur observed during the Tank 4 characterization. The chemistry of the Tank 4 sample was modeled with OLI Systems, Inc. StreamAnalyzer to determine the likelihood that sulfate could exist in this sample as insoluble Burkeite (2Na{sub 2}SO{sub 4} {center_dot} Na{sub 2}CO{sub 3}). The OLI model was also used to predict the composition of the blended tank materials for the washing study. The following conclusions were drawn from the Tank 4 analytical results reported here: (1) Any projected blend of Tank 4 and the current Tank 51 contents will produce a SB6 composition that is lower in Ca and U than the current SB5 composition being processed by DWPF. (2) Unwashed Tank 4 has a relatively large initial S concentration of 3.68 wt% on a total solids basis, and approximately 10% of the total S is present as an

  14. Advising parents on washing babies' clothes.

    PubMed

    Scowen, P

    1996-01-01

    Detergents and other laundry products are generally effective and safe for all the family, but use carefully according to the maker's instructions and keep out of the reach of children. Rinse thoroughly to remove detergent residue from fabrics. If handwashing clothes, dissolve detergent before immersing hands. Wear rubber gloves if possible. Wash, rinse and dry hands thoroughly after contact with detergent. If a baby or parent has eczema, it may be necessary to try different products to see which one the client can tolerate. A non-perfumed, non-enzyme product may be found less irritating. PMID:9077252

  15. Coil spring venting arrangement

    DOEpatents

    McCugh, R.M.

    1975-10-21

    A simple venting device for trapped gas pockets in hydraulic systems is inserted through a small access passages, operated remotely, and removed completely. The device comprises a small diameter, closely wound coil spring which is pushed through a guide temporarily inserted in the access passage. The guide has a central passageway which directs the coil spring radially upward into the pocket, so that, with the guide properly positioned for depth and properly oriented, the coil spring can be pushed up into the top of the pocket to vent it. By positioning a seal around the free end of the guide, the spring and guide are removed and the passage is sealed.

  16. Bacterial resistance and topical antimicrobial wash products.

    PubMed

    Jones, R D

    1999-08-01

    Current scientific evidence has not shown that a link exists between the use of topical antimicrobial formulations and antiseptic or antibiotic resistance. As a result of the extensive history and varied use of antiseptic products and ingredients, any selective pressure for antibiotic resistance that may be occurring or may be uncovered in the future because of antiseptic use would be expected to be insignificant compared with the selective pressure because of antibiotic use. This review illustrates the effectiveness of topical antimicrobial wash products against antibiotic-resistant and antiseptic-resistant bacteria in use settings as well as the studies performed (antiseptic, deodorant, and oral care) demonstrating the lack of development of resistance in long-term clinical studies. Although these studies illustrate that the use of topical antimicrobial products have not been shown to play a role in the fluctuations of the specific composition or resistance of the skin flora, changes in skin flora have been shown to occur. Based on current knowledge, the benefit from use of topical antimicrobial wash products in combination with standard infection control and personal hygiene practices far outweighs the risk of increased antibiotic resistance.

  17. Axial Dispersion during Hanford Saltcake Washing

    SciTech Connect

    Josephson, Gary B.; Geeting, John GH; Lessor, Delbert L.; Barton, William B.

    2006-08-01

    Clean up of Hanford salt cake wastes begins with dissolution retrieval of the sodium rich salts that make up the dominant majority of mass in the tanks. Water moving through the porous salt cake dissolves the soluble components and also displaces the soluble radionuclides (e.g. 137Cs and 99TcO4- ). The separation that occurs from this displacement, known as Selective dissolution, is an important component in Hanford’s pretreatment of low activity wastes for subsequent Supplemental treatment. This paper describes lab scale testing conducted to evaluate Selective dissolution of cesium from non-radioactive Hanford tank 241-S-112 salt cake simulant containing the primary chemicals found the the actual tank. An modified axial dispersion model with increasing axial dispersion was developed to predict cesium removal. The model recognizes that water dissolves the salt cake during washing, which causes an increase in the axial dispersion during the wash. This model was subsequently compared with on-line cesium measurements from the retrieval of tank 241-S-112. The model had remarkably good agreement with both the lab scale and full scale data.

  18. Preliminary hydrogeologic assessment near Tassi and Pakoon Springs, western part of Grand Canyon-Parashant National Monument, Arizona

    USGS Publications Warehouse

    Truini, Margot

    2013-01-01

    Tassi and Pakoon Springs are both in the Grand Wash Trough in the western part of Grand Canyon-Parashant National Monument on the Arizona Strip. The monument is jointly managed by the National Park Service (NPS) and the Bureau of Land Management. This study was in response to NPS’s need to better understand the influence from regional increases in groundwater withdrawals near Grand Canyon-Parashant on the groundwater discharge from Tassi and Pakoon Springs. The climate of the Arizona Strip is generally semiarid to arid, and springs in the monument provide the water for the fragile ecosystems that are commonly separated by large areas of dry washes in canyons with pinyon and juniper. Available hydrogeologic data from previous investigations included water levels from the few existing wells, location information for springs, water chemistry from springs, and geologic maps. Available groundwater-elevation data from the wells and springs in the monument indicate that groundwater in the Grand Wash Trough is moving from north to south, discharging to springs and into the Colorado River. Groundwater may also be moving from east to west from Paleozoic rocks in the Grand Wash Cliffs into sedimentary deposits in the Grand Wash Trough. Finally, groundwater may be moving from the northwest in the Mesoproterozoic crystalline rocks of the Virgin Mountains into the northern part of the Grand Wash Trough. Water discharging from Tassi and Pakoon Springs has a major-ion chemistry similar to that of other springs in the western part of Grand Canyon-Parashant. Stable-isotopic signatures for oxygen-18 and hydrogen-2 are depleted in the water from both Tassi and Pakoon Springs in comparison to other springs on the Arizona Strip. Tassi Spring discharges from multiple seeps along the Wheeler Fault, and the depleted isotopic signatures suggest that water may be flowing from multiple places into Lake Mead and seems to have a higher elevation or an older climate source. Elevated water

  19. Antibacterial perineal washing for prevention of recurrent urinary tract infections.

    PubMed

    Cass, A S; Ireland, G W

    1985-05-01

    Antibacterial ointment applied to the urethral meatus in females with recurrent urinary tract infections (UTIs) has been reported to decrease the incidence of UTIs. The value of perineal washing with the antibacterial lotion, hexachlorophene, in preventing urinary tract infections was determined in 56 females with recurrent UTIs. Of three groups of females one group used hexachlorophene perineal washings morning and night, another group used hexachlorophene perineal washings and an oral antibacterial daily (nitrofurantoin or trimethoprim-sulfamethoxazole), and the third group used the oral antibacterials daily alone. The infections per patient were 3.4 with hexachlorophene washings, 0.5 with hexachlorophene washing and oral antibacterials daily, and 0.9 with oral antibacterials alone. These results suggest that hexachlorophene perineal washing was not effective in preventing UTI in females.

  20. Immersion freezing of birch pollen washing water

    NASA Astrophysics Data System (ADS)

    Augustin, Stefanie; Hartmann, Susan; Pummer, Bernhard; Grothe, Hinrich; Niedermeier, Dennis; Clauss, Tina; Voigtländer, Jens; Tomsche, Laura; Wex, Heike; Stratmann, Frank

    2013-04-01

    Up to now, the importance of pollen for atmospheric ice nucleation was considered to be minor, as they are too large to stay in the atmosphere for a long time. But as recent investigations have shown, not the pollen grains themselves are responsible for freezing, but easily suspendable macromolecules on their surfaces (Pummer et al., 2012). Due to the bursting of pollen grains these ice nucleating active (INA) macromolecules could be numerous in the atmosphere. In the present study, the immersion freezing behavior of birch pollen, i.e. its ice nucleating active (INA) macromolecules, was investigated at the Leipzig Aerosol Cloud Interaction Simulator (LACIS, Hartmann et al., 2011). For this, washing water of two different birch pollen samples with different origin (Northern birch and Southern birch) were used. Immersion freezing of droplets generated from the pollen washing water was observed at temperatures higher than -20 °C for both samples. The main difference between the Northern and the Southern birch pollen was the temperature dependence of the immersion freezing process. Our results suggest that the ice nucleating potential of the Southern birch is controlled by a single type of INA macromolecule, while the Northern birch pollen seem to feature two distinctively different types of INA macromolecules. We determined the heterogeneous nucleation rates for both INA macromolecule types and thereby consistently describe the ice nucleation behavior of both, the Southern and the Northern birch pollen washing water. Furthermore we will suggest a theoretical framework for describing e.g. single INA macromolecule related ice nucleation in atmospheric models. References: Pummer, B. G., Bauer, H., Bernardi, J., Bleicher, S. and Grothe, H.: Suspendable macromolecules are responsible for ice nucleation activity of birch and conifer pollen. Atmos. Chem. Phys., 12, 2541-2550, doi:10.5194/acp-12-2541-2012, 2012. Hartmann, S., Niedermeier, D., Voigtländer, J., Clauss, T

  1. Mineral springs and miracles.

    PubMed

    Forster, M M

    1994-04-01

    Development of hot springs in the Canadian Rockies was closely linked to their reputed medicinal value. In 1885, the federal government created a small reserve around the springs at Sulphur Mountain, an area later enlarged to become Banff National Park, in recognition of the "great sanitary and curative advantage to the public."

  2. A Magnet Spring Model

    ERIC Educational Resources Information Center

    Fay, T. H.; Mead, L.

    2006-01-01

    The paper discusses an elementary spring model representing the motion of a magnet suspended from the ceiling at one end of a vertical spring which is held directly above a second magnet fixed on the floor. There are two cases depending upon the north-south pole orientation of the two magnets. The attraction or repelling force induced by the…

  3. Kane, Validity and Soundness

    ERIC Educational Resources Information Center

    Davies, Alan

    2012-01-01

    In this article, the author begins by discussing four challenges on the concept of validity. These challenges are: (1) the appeal to logic and syllogistic reasoning; (2) the claim of reliability; (3) the local and the universal; and (4) the unitary and the divisible. In language testing validity cannot be achieved directly but only through a…

  4. Durable titania films for solar treatment of biomethanated spent wash

    NASA Astrophysics Data System (ADS)

    Akbarzadeh, Rokhsareh; S. Ghole, Vikram; Javadpour, Sirus

    2016-10-01

    The use of TiO2 films for treatment of biomethanated spent wash is reported. The films of TiO2 were formed and photocatalytic performance of the prepared films in degradation of methylene blue and biomethanated spent wash were studied. Photocatalytic use of these films was found to be effective for degradation of biomethanated spent wash. The photocatalyst was used up for 20 cycles without significant reduction in activities showing long life of the catalyst.

  5. Valve-spring Surge

    NASA Technical Reports Server (NTRS)

    Marti, Willy

    1937-01-01

    Test equipment is described that includes a system of three quartz indicators whereby three different pressures could be synchronized and simultaneously recorded on a single oscillogram. This equipment was used to test the reliction of waves at ends of valve spring, the dynamical stress of the valve spring for a single lift of the valve, and measurement of the curve of the cam tested. Other tests included simultaneous recording of the stress at both ends of the spring, spring oscillation during a single lift as a function of speed, computation of amplitude of oscillation for a single lift by harmonic analysis, effect of cam profile, the setting up of resonance, and forced spring oscillation with damping.

  6. Rotary spring energy storage

    SciTech Connect

    Cooley, S.

    1981-07-01

    The goal was to design a lightweight system, for bicycles, that can level the input energy requirement (human exertion) in accordance with variations in road load (friction, wind, and grade) and/or to provide a system for regenerative braking, that is, to store energy normally lost in brake pad friction for brief periods until it required for re-acceleration or hill-climbing. The rotary spring, also called the coil, motor, spiral, or power spring is governed by the equations reviewed. Materials used in spring manufacture are briefly discussed, and justification for steel as the design choice of material is given. Torque and power requirements for a bicycle and rider are provided as well as estimated human power output levels. These criteria are examined to define spring size and possible orientations on a bicycle. Patents and designs for coupling the spring to the drive train are discussed.

  7. Geohydrologic reconnaissance of Lake Mead National Recreation Area; Las Vegas Wash to Opal Mountain, Nevada

    USGS Publications Warehouse

    Laney, R.L.

    1981-01-01

    The study is a geohydrologic reconnaissance of about 170 square miles in the Lake Mead National Recreation Area from Las Vegas Wash to Opal Mountain, Nevada. The study is one of a series that describes the geohydrology of the recreation area and that indentifies areas where water supplies can be developed. Precipitation in this arid area is about 5 inches per year. Streamflow is seasonal and extremely variable except for that in the Colorado River, which adjoins the area. Pan evaporation is more than 20 times greater than precipitation; therefore, regional ground-water supplies are meager except near the Colorado River, Lake Mead, and Lake Mohave. Large ground-water supplies can be developed near the river and lakes, and much smaller supplies may be obtained in a few favorable locations farther from the river and lakes. Ground water in most of the areas probably contains more than 1,000 milligrams per liter of dissolved solids, but water that contains less than 1,000 milligrams per liter of dissolved solids can be obtained within about 1 mile of the lakes. Crystalline rocks of metamorphic, intrusive and volcanic origin crop out in the area. These rocks are overlain by conglomerate and mudstone of the Muddy Creek Formation, gravel and conglomerate of the older alluvium, and sand and gravel of the Chemehuevi Formation and younger alluvium. The crystalline rocks, where sufficiently fractured, yield water to springs and would yield small amounts of water to favorably located wells. The poorly cemented and more permeable beds of the older alluvium, Chemehuevi Formation, and younger alluvium are the better potential aquifers, particularly along the Colorado River and Lakes Mead and Mohave. Thermal springs in the gorge of the Colorado River south of Hoover Dam discharge at least 2,580 acre-feet per year of water from the volcanic rocks and metamorphic and plutonic rocks. The discharge is much greater than could be infiltrated in the drainage basin above the springs

  8. EFRT M-12 Issue Resolution: Solids Washing

    SciTech Connect

    Baldwin, David L.; Schonewill, Philip P.; Toth, James J.; Huckaby, James L.; Eslinger, Paul W.; Hanson, Brady D.; Kurath, Dean E.; Minette, Michael J.

    2010-01-01

    Pacific Northwest National Laboratory (PNNL) was tasked by Bechtel National Inc. (BNI) on the River Protection Project-Hanford Tank Waste Treatment and Immobilization Plant (RPP-WTP) project to perform research and development activities to resolve technical issues identified for the Pretreatment Facility (PTF). The Pretreatment Engineering Platform (PEP) was designed, constructed, and operated as part of a plan to respond to issue M12, “Undemonstrated Leaching Processes” of the External Flowsheet Review Team (EFRT) issue response plan.( ) The PEP is a 1/4.5-scale test platform designed to simulate the WTP pretreatment caustic leaching, oxidative leaching, ultrafiltration solids concentration, and slurry washing processes. The PEP replicates the WTP leaching processes using prototypic equipment and control strategies. The PEP also includes non-prototypic ancillary equipment to support the core processing.

  9. Landscape of WASH-relevant Training for Humanitarian Emergencies

    PubMed Central

    Dorea, Caetano

    2015-01-01

    Background: Both employed humanitarian personnel as well as those seeking to start a career as an aid worker are often provided with or seek training on the theme of humanitarian water, sanitation, and hygiene (WASH). The objective of this study was to conduct a landscaping exercise of the available WASH-relevant training for humanitarian emergencies. Methods: An open internet search was performed with specific terms related to humanitarian WASH. Retained search results included those training opportunities (including past ones) that were themed around or with a mentioned relevance to humanitarian WASH. Results and Discussion: A total of 42 training courses relevant to humanitarian emergency WASH were retained. In addition to the more generic/introductory trainings, some provided thematic variations such as coordination of WASH responses, project management, risk reduction, information, education and communication (IEC), and complex emergencies. Timely topics such as urban WASH, Ebola, and WASH innovations were also observed indicating the responsiveness of the training providers to the changing needs of humanitarian WASH response programmes. This survey also revealed a large variety in terms of target audience, duration, fees, location, and language of courses. There was no centralised listing of courses available on the Internet. Limitations of this exercise were also discussed. PMID:26064781

  10. Relation of peralkaline magmatism to heterogeneous extension during the Middle Miocene, southeastern Nevada

    USGS Publications Warehouse

    Scott, R.B.

    1995-01-01

    Volcanism migrated southward in the northern Basin and Range province in the Oligocene and early Miocene to produce voluminous calcalkaline silicic ash flow tuffs. Alkaline volcanism became dominant by middle Miocene (17-14 Ma) as smaller volumes of rhyolite-trachyte-basalt suites were erupted from the relatively small Kane Springs Wash caldera complex in southeastern Nevada. Only minor extension affected the Kane Wash area before the end of calcalkaline activity, but extension expressed by rate of progressive stratal tilt peaked (15-13.5 Ma) with peralkaline magmatism (14.7-14.4 Ma). Variations in distribution, degree, style, and timing of deformation demonstrate heterogeneous extension in the Kane Wash area. Only minor extension and tilting persisted post-middle Miocene (<12 Ma). All major eruptive sources overlap domains of rapid extension. -from Authors

  11. An equivalent spring for nonlinear springs in series

    NASA Astrophysics Data System (ADS)

    Radomirovic, Dragi; Kovacic, Ivana

    2015-09-01

    This work is concerned with nonlinear springs in series with the aim of obtaining the equivalent spring and its characteristics. The case of two linear springs in series is presented first as a basis for the extension to the cases of two purely nonlinear springs in series and two or more equal Duffing springs in series, which both allow the exact determination of the equivalent spring. Then, the most general case of two nonlinear springs with odd-power terms and different coefficients is examined. The condition is derived in terms of their characteristics for which the exact solution for the equivalent spring can be obtained.

  12. Sludge pretreatment chemistry evaluation: Enhanced sludge washing separation factors

    SciTech Connect

    Colton, N.G.

    1995-03-01

    This report presents the work conducted in Fiscal Year 1994 by the Sludge Pretreatment Chemistry Evaluation Subtask for the Tank Waste Remediation System (TWRS) Tank Waste Treatment Science Task. The main purpose of this task, is to provide the technical basis and scientific understanding to support TWRS baseline decisions and actions, such as the development of an enhanced sludge washing process to reduce the volume of waste that will require high-level waste (HLW) vitrification. One objective within the Sludge Pretreatment Chemistry Evaluation Subtask was to establish wash factors for various SST (single-shell tank) sludges. First, analytical data were compiled from existing tank waste characterization reports. These data were summarized on tank-specific worksheets that provided a uniform format for reviewing and comparing data, as well as the means to verify whether the data set for each tank was complete. Worksheets were completed for 27 SST wastes. The analytical water wash data provided tank-specific information about the fraction of each component that dissolves with water, i.e., an estimate of tank-specific wash factors for evaluating tank-by-tank processing. These wash data were then used collectively to evaluate some of the wash factors that are assumed for the overall SST waste inventory; specifically, wash factors for elements that would be found primarily in sludges. The final step in this study was to incorporate the characterization and wash factor data into a spreadsheet that provides insight into the effect of enhanced sludge washing on individual tank sludges as well as for groups of sludges that may be representative of different waste types. Spreadsheet results include the estimated mass and percentage of each element that would be removed with washing and leaching. Furthermore, estimated compositions are given of the final wash and leach streams and residual solids, in terms of both concentration and dry weight percent.

  13. Prototype wash water renovation system integration with goverment-furnished wash fixture

    NASA Technical Reports Server (NTRS)

    1983-01-01

    A total renovation concept for removing objectionable materials from spacecraft wash water to make the water reusable was developed. This concept included ferric chloride pretreatment to coagulate suspended solids such as soap and lint, pressure filtration, and carbon adsorption and ion exchange to remove trace dissolved organics and inorganic salts. A breadboard model which was developed to demonstrate the design adequacy of the various system components and the limits on system capacities and efficiencies.

  14. 33 CFR 157.124 - COW tank washing machines.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 33 Navigation and Navigable Waters 2 2012-07-01 2012-07-01 false COW tank washing machines. 157....124 COW tank washing machines. (a) COW machines must be permanently mounted in each cargo tank. (b) The COW machines in each tank must have sufficient nozzles with the proper diameter, working...

  15. BLAISDELL SLOW SAND FILTER WASHING MACHINE. VIEW LOOKING NORTHWEST. PIPING ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    BLAISDELL SLOW SAND FILTER WASHING MACHINE. VIEW LOOKING NORTHWEST. PIPING IN FOREGROUND IS NOT RELATED TO THE MACHINE. THE NORTHEAST CORNER OF SETTLING RESERVOIR NO. 3 IS SEEN AT THE LOWER LEFT. - Yuma Main Street Water Treatment Plant, Blaisdell Slow Sand Filter Washing Machine, Jones Street at foot of Main Street, Yuma, Yuma County, AZ

  16. 33 CFR 157.124 - COW tank washing machines.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 33 Navigation and Navigable Waters 2 2011-07-01 2011-07-01 false COW tank washing machines. 157....124 COW tank washing machines. (a) COW machines must be permanently mounted in each cargo tank. (b) The COW machines in each tank must have sufficient nozzles with the proper diameter, working...

  17. 33 CFR 157.124 - COW tank washing machines.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 33 Navigation and Navigable Waters 2 2010-07-01 2010-07-01 false COW tank washing machines. 157....124 COW tank washing machines. (a) COW machines must be permanently mounted in each cargo tank. (b) The COW machines in each tank must have sufficient nozzles with the proper diameter, working...

  18. 33 CFR 157.124 - COW tank washing machines.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 33 Navigation and Navigable Waters 2 2014-07-01 2014-07-01 false COW tank washing machines. 157....124 COW tank washing machines. (a) COW machines must be permanently mounted in each cargo tank. (b) The COW machines in each tank must have sufficient nozzles with the proper diameter, working...

  19. 33 CFR 157.124 - COW tank washing machines.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 33 Navigation and Navigable Waters 2 2013-07-01 2013-07-01 false COW tank washing machines. 157....124 COW tank washing machines. (a) COW machines must be permanently mounted in each cargo tank. (b) The COW machines in each tank must have sufficient nozzles with the proper diameter, working...

  20. BLAISDELL SLOW SAND FILTER WASHING MACHINE. VIEW LOOKING WEST. THE ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    BLAISDELL SLOW SAND FILTER WASHING MACHINE. VIEW LOOKING WEST. THE NONHISTORIC CHEMICAL BUILDING IS SEEN IN THE BACKGROUND. - Yuma Main Street Water Treatment Plant, Blaisdell Slow Sand Filter Washing Machine, Jones Street at foot of Main Street, Yuma, Yuma County, AZ

  1. EPA site demonstration of the Biotrol Soil Washing Process

    SciTech Connect

    Stinson, M.K.; Skovronek, H.S.; Ellis, W.D.

    1992-01-01

    A pilot-scale soil washing process, patented by BioTrol, was demonstrated on soil that was contaminated by wood treating waste. The BioTrol Soil Washing was demonstrated in a treatment train sequence with two other pilot-scale units of BioTrol technologies for treatment of waste streams from the soil washer. The three technologies of the treatment train were: The BioTrol Soil Washer (BSW), the BioTrol Aqueous Treatment System (BATS), and the Slurry Bioreactor (SBR). The BioTrol processes were evaluated on pentachlorophenol (PCP) and polynuclear aromatic hydrocarbons (PAHs), which were the primary soil contaminants at the site. The sandy site soil, consisting of less than 10% of fines, was well suited for treatment by soil washing. The BSW successfully separated the feed soil (100% by weight) into 83% of washed soil, 10% of woody residues, and 7% of fines. The soil washer achieved up to 89% removal of PCP and PAHs, based on the difference between their levels in the feed soil and in the washed soil. The BATS degraded up to 94% of PCP in the process water from soil washing. The SBR achieved over 90% removals of PCP and 70-90% removals of PAHs, respectively from the soil washing. Cost of a commercial-scale soil washing, assuming use of all three technologies, was estimated to be $168 per ton of treated soil.

  2. EPA SITE DEMONSTRATION OF THE BIOTROL SOIL WASHING PROCESS

    EPA Science Inventory

    A pilot-scale soil washing process, patented by BioTrol, Inc., was demonstrate on soil contaminated by wood treating waste, primarily pentachlorophenol (PCP) and creosote-derived polynuclear aromatic hydrocarbons (PAHs). Although soil washing was the main object of this demonstra...

  3. 30 CFR 1206.458 - Determination of washing allowances.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 30 Mineral Resources 3 2012-07-01 2012-07-01 false Determination of washing allowances. 1206.458 Section 1206.458 Mineral Resources OFFICE OF NATURAL RESOURCES REVENUE, DEPARTMENT OF THE INTERIOR NATURAL... allowance for the costs of washing lease production that is not royalty bearing. (c) Reporting...

  4. 30 CFR 1206.259 - Determination of washing allowances.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 30 Mineral Resources 3 2012-07-01 2012-07-01 false Determination of washing allowances. 1206.259 Section 1206.259 Mineral Resources OFFICE OF NATURAL RESOURCES REVENUE, DEPARTMENT OF THE INTERIOR NATURAL... allowance for the costs of washing lease production that is not royalty bearing. (c) Reporting...

  5. 49 CFR 393.78 - Windshield wiping and washing systems.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... wiping and washing systems. (a) Vehicles manufactured on or after December 25, 1968. Each bus, truck, and truck-tractor manufactured on or after December 25, 1968, must have a windshield wiping system that... 49 Transportation 5 2011-10-01 2011-10-01 false Windshield wiping and washing systems....

  6. 49 CFR 393.78 - Windshield wiping and washing systems.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... wiping and washing systems. (a) Vehicles manufactured on or after December 25, 1968. Each bus, truck, and truck-tractor manufactured on or after December 25, 1968, must have a windshield wiping system that... 49 Transportation 5 2010-10-01 2010-10-01 false Windshield wiping and washing systems....

  7. 2. VIEW OF WASH TANKS Skins are brought in through ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    2. VIEW OF WASH TANKS Skins are brought in through hatches, seen on rear wall, and washed of blood and flesh in redwood tanks, with wooden grates to hold skins down in water. Superstructure and screening on tanks are a later alteration, unrelated to this process. - Sealing Plant, St. George Island, Pribilof Islands, Saint George, Aleutians West Census Area, AK

  8. 30 CFR 1206.458 - Determination of washing allowances.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 30 Mineral Resources 3 2014-07-01 2014-07-01 false Determination of washing allowances. 1206.458 Section 1206.458 Mineral Resources OFFICE OF NATURAL RESOURCES REVENUE, DEPARTMENT OF THE INTERIOR NATURAL RESOURCES REVENUE PRODUCT VALUATION Indian Coal § 1206.458 Determination of washing allowances. (a) Arm's-length contracts. (1) For...

  9. 30 CFR 1206.259 - Determination of washing allowances.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 30 Mineral Resources 3 2014-07-01 2014-07-01 false Determination of washing allowances. 1206.259 Section 1206.259 Mineral Resources OFFICE OF NATURAL RESOURCES REVENUE, DEPARTMENT OF THE INTERIOR NATURAL RESOURCES REVENUE PRODUCT VALUATION Federal Coal § 1206.259 Determination of washing allowances. (a) Arm's-length contracts. (1) For...

  10. 30 CFR 206.259 - Determination of washing allowances.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... which the wash plant services, whichever is appropriate, or a unit of production method. After an... market the production for the mutual benefit of the lessee and the lessor, then MMS shall require that... lessee's payments for washing under an arm's-length contract are not based on a dollar-per-unit...

  11. 2. VIEW LOOKING NORTHWEST AT CHINA WASH FLUME ON MAIN ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    2. VIEW LOOKING NORTHWEST AT CHINA WASH FLUME ON MAIN CANAL - San Carlos Irrigation Project, China Wash Flume, Main (Florence-Case Grande) Canal at Station 137+00, T4S, R10E, S14, Coolidge, Pinal County, AZ

  12. 1. VIEW LOOKING WEST AT CHINA WASH FLUME ON MAIN ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    1. VIEW LOOKING WEST AT CHINA WASH FLUME ON MAIN CANAL. - San Carlos Irrigation Project, China Wash Flume, Main (Florence-Case Grande) Canal at Station 137+00, T4S, R10E, S14, Coolidge, Pinal County, AZ

  13. 30 CFR 1206.258 - Washing allowances-general.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 30 Mineral Resources 3 2011-07-01 2011-07-01 false Washing allowances-general. 1206.258 Section 1206.258 Mineral Resources OFFICE OF SURFACE MINING RECLAMATION AND ENFORCEMENT, DEPARTMENT OF THE INTERIOR Natural Resources Revenue PRODUCT VALUATION Federal Coal § 1206.258 Washing allowances—general....

  14. 7 CFR 2902.51 - Parts wash solutions.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... Items § 2902.51 Parts wash solutions. (a) Definition. Products that are designed to clean parts in manual or automatic cleaning systems. Such systems include, but are not limited to, soak vats and tanks... 7 Agriculture 15 2010-01-01 2010-01-01 false Parts wash solutions. 2902.51 Section...

  15. 7 CFR 2902.51 - Parts wash solutions.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... Items § 2902.51 Parts wash solutions. (a) Definition. Products that are designed to clean parts in manual or automatic cleaning systems. Such systems include, but are not limited to, soak vats and tanks... 7 Agriculture 15 2011-01-01 2011-01-01 false Parts wash solutions. 2902.51 Section...

  16. Wash room, bunkhouse, first floor interior. This room is a ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Wash room, bunkhouse, first floor interior. This room is a screened porch with the original sinks extant. Light and ventilation was borrowed from the wash room into the toilets and bathing rooms. - Sespe Ranch, Bunkhouse, 2896 Telegraph Road, Fillmore, Ventura County, CA

  17. Triplet p + ip pairing correlations in the doped Kane-Mele-Hubbard model: A quantum Monte Carlo study

    SciTech Connect

    Ma, Tianxing; Lin, Hai-Qing; Gubernatis, James E.

    2015-09-01

    By using the constrained-phase quantum Monte Carlo method, we performed a systematic study of the pairing correlations in the ground state of the doped Kane-Mele-Hubbard model on a honeycomb lattice. We find that pairing correlations with d + id symmetry dominate close to half filling, but pairing correlations with p+ip symmetry dominate as hole doping moves the system below three-quarters filling. We correlate these behaviors of the pairing correlations with the topology of the Fermi surfaces of the non-interacting problem. We also find that the effective pairing correlation is enhanced greatly as the interaction increases, and these superconducting correlations are robust against varying the spin-orbit coupling strength. Finally, our numerical results suggest a possible way to realize spin triplet superconductivity in doped honeycomb-like materials or ultracold atoms in optical traps.

  18. Behavior of Shiga toxigenic Escherichia coli relevant to lettuce washing processes and consideration of factors for evaluating washing process surrogates.

    PubMed

    Deng, Kaiping; Wang, Xue; Yen, Li-Han; Ding, Hongliu; Tortorello, Mary Lou

    2014-11-01

    Postharvest processes for fresh produce commonly include washing in water containing antimicrobial chemicals, such as chlorine; however, if the antimicrobials are not present in sufficient levels, washing can promote the spread of contamination that might be present. To understand cross-contamination risk during washing, we tested a collection of Shiga toxigenic Escherichia coli (STEC), including O157:H7 and other non-O157 strains, for certain traits during washing of fresh-cut lettuce, i.e., sensitivity to sublethal chlorine levels and ability to cross-contaminate (detach from and attach to) lettuce in the presence of sublethal chlorine levels. Nonpathogenic E. coli Nissle 1917 (EcN) and Pediococcus pentosaceus lactic acid bacterial species (LAB) were included as potential washing process validation surrogates. As measured by extension of the lag phase of growth in media containing 0.15 ppm of chlorine, chlorine sensitivity varied among the STECs. Cross-contamination was assessed by evaluating transfer of bacteria from inoculated to uninoculated leaves during washing. Without chlorine, similar transfer to wash water and uninoculated leaves was shown. In 1 ppm of chlorine, cross-contamination was not detected with most strains, except for the substantial transfer by a STEC O111 strain and EcN in some replicates. Strain O111 and EcN showed less inactivation in 0.25 ppm of chlorine water compared with O157 (P < 0.05). LAB showed similar transfer and similar chlorine inactivation to O157. Considering together the sublethal chlorine sensitivity and detachment/attachment traits, neither EcN nor LAB displayed optimal characteristics as washing process surrogates for the STEC strains, although further evaluation is needed. This work demonstrated a range of behaviors of STEC strains during lettuce washing and may be helpful in hazard characterization, identifying factors to consider for evaluating washing process efficacy, and identifying phenotypic traits to select

  19. Harbingers of Spring

    ERIC Educational Resources Information Center

    Serrao, John

    1976-01-01

    Emphasizing the spring migration of frogs, toads, and salamanders to their watery breeding sites, this article presents information on numerous amphibians and suggests both indoor and outdoor educational activities appropriate for elementary and/or early secondary instruction. (JC)

  20. The formulation of dynamical contact problems with friction in the case of systems of rigid bodies and general discrete mechanical systems—Painlevé and Kane paradoxes revisited

    NASA Astrophysics Data System (ADS)

    Charles, Alexandre; Ballard, Patrick

    2016-08-01

    The dynamics of mechanical systems with a finite number of degrees of freedom (discrete mechanical systems) is governed by the Lagrange equation which is a second-order differential equation on a Riemannian manifold (the configuration manifold). The handling of perfect (frictionless) unilateral constraints in this framework (that of Lagrange's analytical dynamics) was undertaken by Schatzman and Moreau at the beginning of the 1980s. A mathematically sound and consistent evolution problem was obtained, paving the road for many subsequent theoretical investigations. In this general evolution problem, the only reaction force which is involved is a generalized reaction force, consistently with the virtual power philosophy of Lagrange. Surprisingly, such a general formulation was never derived in the case of frictional unilateral multibody dynamics. Instead, the paradigm of the Coulomb law applying to reaction forces in the real world is generally invoked. So far, this paradigm has only enabled to obtain a consistent evolution problem in only some very few specific examples and to suggest numerical algorithms to produce computational examples (numerical modeling). In particular, it is not clear what is the evolution problem underlying the computational examples. Moreover, some of the few specific cases in which this paradigm enables to write down a precise evolution problem are known to show paradoxes: the Painlevé paradox (indeterminacy) and the Kane paradox (increase in kinetic energy due to friction). In this paper, we follow Lagrange's philosophy and formulate the frictional unilateral multibody dynamics in terms of the generalized reaction force and not in terms of the real-world reaction force. A general evolution problem that governs the dynamics is obtained for the first time. We prove that all the solutions are dissipative; that is, this new formulation is free of Kane paradox. We also prove that some indeterminacy of the Painlevé paradox is fixed in this

  1. Springs of Great Britain

    NASA Astrophysics Data System (ADS)

    Day, J. B. W.

    1996-03-01

    Predictably, in a country such as Britain, with its preponderance of consolidated, sedimentary, mainly fissure-flow aquifers, there is a very large number of springs, many of which are, or have been, used for public supply. Migratory springs are a feature of the British (Ur. Cretaceous) Chalk, the most important British aquifer. The Chalk's low specific yield and high capillary moisture retention together give rise to very considerable fluctuations (more than 33 m in some areas) of the unconfined water table. Along the gentle dip slopes of the Chalk (North and South Downs of southern and southeastern England) springs may migrate laterally for several miles, giving rise to seasonal streams locally known as “bournes” or “lavants”. However, springs such as at Duncton, West Sussex, at the base of the much steeper scarp slopes of the Chalk, form point sources, the flows from which tend to be relatively steady; such springs commonly supply and are the original reason for the existence of many of the small towns and villages which nestle along the bases of the chalk scarps of Sussex and Kent. Where the Chalk forms coastal cliffs, a number of springs break out at the base of the cliff between high and low tide levels; there are major chalk coastal springs, for instance, at St. Margaret's Bay (Kent) and at Arish Mells, east of Lulworth Cove, Dorset. Such springs are not used for direct supply (their salinity is usually too high) but are indicators of the presence of local reserves of groundwater for possible future development.

  2. Mineral springs and miracles.

    PubMed Central

    Forster, M. M.

    1994-01-01

    Development of hot springs in the Canadian Rockies was closely linked to their reputed medicinal value. In 1885, the federal government created a small reserve around the springs at Sulphur Mountain, an area later enlarged to become Banff National Park, in recognition of the "great sanitary and curative advantage to the public." Images p730-a p731-a p732-a p733-a p734-a p736-a PMID:8199525

  3. The source of groundwater and solutes to Many Devils Wash at a former uranium mill site in Shiprock, New Mexico

    USGS Publications Warehouse

    Robertson, Andrew J.; Ranalli, Anthony J.; Austin, Stephen A.; Lawlis, Bryan R.

    2016-04-21

    The Shiprock Disposal Site is the location of the former Navajo Mill (Mill), a uranium ore-processing facility, located on a terrace overlooking the San Juan River in the town of Shiprock, New Mexico. Following the closure of the Mill, all tailings and associated materials were encapsulated in a disposal cell built on top of the former Mill and tailings piles. The milling operations, conducted at the site from 1954 to 1968, created radioactive tailings and process-related wastes that are now found in the groundwater. Elevated concentrations of constituents of concern—ammonium, manganese, nitrate, selenium, strontium, sulfate, and uranium—have also been measured in groundwater seeps in the nearby Many Devils Wash arroyo, leading to the inference that these constituents originated from the Mill. These constituents have also been reported in groundwater that is associated with Mancos Shale, the bedrock that underlies the site. The objective of this report is to increase understanding of the source of water and solutes to the groundwater beneath Many Devils Wash and to establish the background concentrations for groundwater that is in contact with the Mancos Shale at the site. This report presents evidence on three working hypotheses: (1) the water and solutes in Many Devils Wash originated from the operations at the former Mill, (2) groundwater in deep aquifers is upwelling under artesian pressure to recharge the shallow groundwater beneath Many Devils Wash, and (3) the groundwater beneath Many Devils Wash originates as precipitation that infiltrates into the shallow aquifer system and discharges to Many Devils Wash in a series of springs on the east side of the wash. The solute concentrations in the shallow groundwater of Many Devils Wash would result from the interaction of the water and the Mancos Shale if the source of water was upwelling from deep aquifers or precipitation.In order to compare the groundwater from various wells to groundwater that has been

  4. Genesis Eco Systems, Inc. soil washing process

    SciTech Connect

    Cena, R.J.

    1994-10-11

    The Genesis soil washing system is an integrated system of modular design allowing for maximum material handling capabilities, with optimized use of space for site mobility. The Surfactant Activated Bio-enhanced Remediation Equipment-Generation 1 (SABRE-1, Patent Applied For) modification was developed specifically for removing petroleum byproducts from contaminated soils. Scientifically formulated surfactants, introduced by high pressure spray nozzles, displace the contaminant from the surface of the soil particles into the process solution. Once the contaminant is dispersed into the liquid fraction of the process, it is either mechanically removed, chemically oxidized, or biologically oxidized. The contaminated process water is pumped through the Genesis Biosep (Patent Applied For) filtration system where the fines portion is flocculated, and the contaminant-rich liquid portion is combined with an activated mixture of nutrients and carefully selected bacteria to decompose the hydrocarbon fraction. The treated soil and dewatered fines are transferred to a bermed stockpile where bioremediation continues during drying. The process water is reclaimed, filtered, and recycled within the system.

  5. Segmented tubular cushion springs and spring assembly

    NASA Technical Reports Server (NTRS)

    Haslim, L. A. (Inventor)

    1985-01-01

    A spring which includes a tube with an elliptical cross section, with the greater axial dimension extending laterally and the lesser axial dimension extending vertically is disclosed. A plurality of cuts in the form of slots passing through most of a wall of the tube extend perpendiculary to a longitudinal axis extending along the tube. An uncut portion of the tube wall extends along the tube for bonding or fastening the tube to a suitable base, such as a bottom of a seat cushion.

  6. Segmented tubular cushion springs and spring assembly

    NASA Technical Reports Server (NTRS)

    Haslim, Leonard A. (Inventor)

    1988-01-01

    A spring (10) includes a tube (12) having an elliptical cross section, with the greater axial dimension (22) extending laterally and the lesser axial dimension (24) extending vertically. A plurality of cuts (20) in the form of slots passing through most of a wall of the tube (12) extend perpendicularly to a longitudinal axis (16) extending along the tube (12). An uncut portion (26) of the tube wall extends along the tube (12) for bonding or fastening the tube to a suitable base, such as a bottom (28) of a seat cushion (30).

  7. [To wash or not to wash the hands? Reasons for a nursing team].

    PubMed

    Martini, Angela Conte; Dall'Agnol, Clarice Maria

    2005-04-01

    A qualitative study was performed by asking the nursing team at an emergency care hospital about the reasons that lead them to wash their hands or not, since this is an important measure to control cross infection in hospitals. The data, obtained by using the focus groups technique were submitted to enunciation analysis, resulting in emerging topics. It was found out that the supply of material and environmental resources is essential but does not solve all problems. The procedure is performed mainly because of visible dirt and it is a neglected and undervalued practice with predominant focus on protecting the professionals.

  8. Microbiological aspects of washing hands in slaughter-houses.

    PubMed

    de Wit, J C; Kampelmacher, E H

    1982-01-01

    The hand hygiene of workers in a number of chicken-, pig-, calf- and cattle slaughter-houses was investigated. The number of E. coli and salmonellae on hands was determined before and after washing hands in order to measure the washing effect on the number of these faecal bacteria. All workers examined carried E. coli on their hands during work. The average logarithmic E. coli count on hands before washing was about 5.0 in chicken-and calf-slaughter-houses, about 3.5 in pig-and 3.0 in cattle-slaughter-houses. Hand washing decreased the E. coli count per hand by about 1.5 log cycle. Salmonellae were isolated from the hands in chicken- (59 pos./145 samples), pig-(42 pos./116 samples) and calf-slaughter-houses (11 pos./68 samples). Even after washing salmonellae were found to be present. Generally 'normal' washing causes a considerable reduction in the number of transient bacteria on hands. The presence of E. coli and Salmonella after washing, however, indicates that the effectiveness of the procedure needs to be improved.

  9. Immersion freezing of birch pollen washing water

    NASA Astrophysics Data System (ADS)

    Augustin, S.; Wex, H.; Niedermeier, D.; Pummer, B.; Grothe, H.; Hartmann, S.; Tomsche, L.; Clauss, T.; Voigtländer, J.; Ignatius, K.; Stratmann, F.

    2013-11-01

    Birch pollen grains are known to be ice nucleating active biological particles. The ice nucleating activity has previously been tracked down to biological macromolecules that can be easily extracted from the pollen grains in water. In the present study, we investigated the immersion freezing behavior of these ice nucleating active (INA) macromolecules. Therefore we measured the frozen fractions of particles generated from birch pollen washing water as a function of temperature at the Leipzig Aerosol Cloud Interaction Simulator (LACIS). Two different birch pollen samples were considered, with one originating from Sweden and one from the Czech Republic. For the Czech and Swedish birch pollen samples, freezing was observed to start at -19 and -17 °C, respectively. The fraction of frozen droplets increased for both samples down to -24 °C. Further cooling did not increase the frozen fractions any more. Instead, a plateau formed at frozen fractions below 1. This fact could be used to determine the amount of INA macromolecules in the droplets examined here, which in turn allowed for the determination of nucleation rates for single INA macromolecules. The main differences between the Swedish birch pollen and the Czech birch pollen were obvious in the temperature range between -17 and -24 °C. In this range, a second plateau region could be seen for Swedish birch pollen. As we assume INA macromolecules to be the reason for the ice nucleation, we concluded that birch pollen is able to produce at least two different types of INA macromolecules. We were able to derive parameterizations for the heterogeneous nucleation rates for both INA macromolecule types, using two different methods: a simple exponential fit and the Soccer ball model. With these parameterization methods we were able to describe the ice nucleation behavior of single INA macromolecules from both the Czech and the Swedish birch pollen.

  10. Hand washing frequencies and procedures used in retail food services.

    PubMed

    Strohbehn, Catherine; Sneed, Jeannie; Paez, Paola; Meyer, Janell

    2008-08-01

    Transmission of viruses, bacteria, and parasites to food by way of improperly washed hands is a major contributing factor in the spread of foodborne illnesses. Field observers have assessed compliance with hand washing regulations, yet few studies have included consideration of frequency and methods used by sectors of the food service industry or have included benchmarks for hand washing. Five 3-h observation periods of employee (n = 80) hand washing behaviors during menu production, service, and cleaning were conducted in 16 food service operations for a total of 240 h of direct observation. Four operations from each of four sectors of the retail food service industry participated in the study: assisted living for the elderly, childcare, restaurants, and schools. A validated observation form, based on 2005 Food Code guidelines, was used by two trained researchers. Researchers noted when hands should have been washed, when hands were washed, and how hands were washed. Overall compliance with Food Code recommendations for frequency during production, service, and cleaning phases ranged from 5% in restaurants to 33% in assisted living facilities. Procedural compliance rates also were low. Proposed benchmarks for the number of times hand washing should occur by each employee for each sector of food service during each phase of operation are seven times per hour for assisted living, nine times per hour for childcare, 29 times per hour for restaurants, and 11 times per hour for schools. These benchmarks are high, especially for restaurant employees. Implementation would mean lost productivity and potential for dermatitis; thus, active managerial control over work assignments is needed. These benchmarks can be used for training and to guide employee hand washing behaviors. PMID:18724759

  11. Damper Spring For Omega Seal

    NASA Technical Reports Server (NTRS)

    Maclaughlin, Scott T.; Montgomery, Stuart K.

    1993-01-01

    Damper spring reduces deflections of omega-cross-section seal, reducing probability of failure and extending life of seal. Spring is split ring with U-shaped cross section. Placed inside omega seal and inserted with seal into seal cavity. As omega seal compressed into cavity, spring and seal make contact near convolution of seal, and spring becomes compressed also. During operation, when seal dynamically loaded, spring limits deflection of seal, reducing stress on seal.

  12. Experimental study of the constituents of space wash water

    NASA Technical Reports Server (NTRS)

    Putnam, D. F.; Colombo, G. V.

    1975-01-01

    This report presents experimental data, obtained under controlled conditions, which quantify the various constituents of human origin that may be expected in space wash water. The experiments were conducted with a simulated crew of two male and two female subjects. The data show that the expected wash water contaminants originating from human secretions are substantially lower than theoretical projections indicated. The data presented are immediately useful and may have considerable impact on the tradeoff comparisons among various unit processes and systems under consideration by NASA for recycling space wash water.

  13. Effects of soap-water wash on human epidermal penetration.

    PubMed

    Zhu, Hanjiang; Jung, Eui-Chang; Phuong, Christina; Hui, Xiaoying; Maibach, Howard

    2016-08-01

    Skin decontamination is a primary interventional method used to decrease dermal absorption of hazardous contaminants, including chemical warfare agents, pesticides and industrial pollutants. Soap and water wash, the most common and readily available decontamination system, may enhance percutaneous absorption through the "wash-in effect." To understand better the effect of soap-water wash on percutaneous penetration, and provide insight to improving skin decontamination methods, in vitro human epidermal penetration rates of four C(14) -labeled model chemicals (hydroquinone, clonidine, benzoic acid and paraoxon) were assayed using flow-through diffusion cells. Stratum corneum (SC) absorption rates of these chemicals at various hydration levels (0-295% of the dry SC weights) were determined and compared with the results of the epidermal penetration study to clarify the effect of SC hydration on skin permeability. Results showed accelerated penetration curves of benzoic acid and paraoxon after surface wash at 30 min postdosing. Thirty minutes after washing (60 min postdosing), penetration rates of hydroquinone and benzoic acid decreased due to reduced amounts of chemical on the skin surface and in the SC. At the end of the experiment (90 min postdosing), a soap-water wash resulted in lower hydroquinone penetration, greater paraoxon penetration and similar levels of benzoic acid and clonidine penetration compared to penetration levels in the non-wash groups. The observed wash-in effect agrees with the enhancement effect of SC hydration on the SC chemical absorption rate. These results suggest SC hydration derived from surface wash to be one cause of the wash-in effect. Further, the occurrence of a wash-in effect is dependent on chemical identity and elapsed time between exposure and onset of decontamination. By reducing chemical residue quantity on skin surface and in the SC reservoir, the soap-water wash may decrease the total quantity of chemical absorbed in the

  14. Endotoxins in cotton: washing effects and size distribution

    SciTech Connect

    Olenchock, S.A.; Mull, J.C.; Jones, W.G.

    1983-01-01

    Endotoxin contamination was measured in washed and unwashed cottons from three distinct growing areas, California, Mississippi, and Texas. The data show differences in endotoxin contamination based upon the geographic source of the cotton. It is also shown that washing bulk cotton before the carding process results in lower endotoxin in the cotton dust. Washing conditions can affect the endotoxin levels, and all size fractions of the airborne dust contain quantifiable endotoxin contamination. Endotoxin analyses provide a simple and reliable method for monitoring the cleanliness of cotton or airborne cotton dusts.

  15. Experimental study of the constituents of space wash water

    NASA Technical Reports Server (NTRS)

    Colombo, G. V.; Putnam, D. F.

    1976-01-01

    Data are presented that quantify some of the various constituents of human origin that may be expected in space wash water. The experiments were conducted under controlled conditions with a simulated crew of two male and two female subjects. The data show that the expected wash water constituents originating from human secretions are substantially lower than theoretical projections have indicated. Average daily quantities as well as individual extremes are given for both shower and laundry water. In addition, concentrations are presented for a projected model of wash water usage in a space station.

  16. Effects of soap-water wash on human epidermal penetration.

    PubMed

    Zhu, Hanjiang; Jung, Eui-Chang; Phuong, Christina; Hui, Xiaoying; Maibach, Howard

    2016-08-01

    Skin decontamination is a primary interventional method used to decrease dermal absorption of hazardous contaminants, including chemical warfare agents, pesticides and industrial pollutants. Soap and water wash, the most common and readily available decontamination system, may enhance percutaneous absorption through the "wash-in effect." To understand better the effect of soap-water wash on percutaneous penetration, and provide insight to improving skin decontamination methods, in vitro human epidermal penetration rates of four C(14) -labeled model chemicals (hydroquinone, clonidine, benzoic acid and paraoxon) were assayed using flow-through diffusion cells. Stratum corneum (SC) absorption rates of these chemicals at various hydration levels (0-295% of the dry SC weights) were determined and compared with the results of the epidermal penetration study to clarify the effect of SC hydration on skin permeability. Results showed accelerated penetration curves of benzoic acid and paraoxon after surface wash at 30 min postdosing. Thirty minutes after washing (60 min postdosing), penetration rates of hydroquinone and benzoic acid decreased due to reduced amounts of chemical on the skin surface and in the SC. At the end of the experiment (90 min postdosing), a soap-water wash resulted in lower hydroquinone penetration, greater paraoxon penetration and similar levels of benzoic acid and clonidine penetration compared to penetration levels in the non-wash groups. The observed wash-in effect agrees with the enhancement effect of SC hydration on the SC chemical absorption rate. These results suggest SC hydration derived from surface wash to be one cause of the wash-in effect. Further, the occurrence of a wash-in effect is dependent on chemical identity and elapsed time between exposure and onset of decontamination. By reducing chemical residue quantity on skin surface and in the SC reservoir, the soap-water wash may decrease the total quantity of chemical absorbed in the

  17. Percutaneous penetration and pharmacodynamics: Wash-in and wash-off of sunscreen and insect repellent.

    PubMed

    Rodriguez, Jocelyn; Maibach, Howard I

    2016-01-01

    Increased awareness of skin cancer and mosquito-transmitted diseases has increased use of insect repellents and sunscreens. The challenge in setting recommendations for use and reapplication, especially when used concomitantly, lies in finding the balance between applying a durable product effective in withstanding natural and physical factors such as water, sweat, temperature and abrasion, while limiting percutaneous absorption and decreasing risk of potential dermal and systemic toxicity. Inorganic sunscreens show no or little percutaneous absorption or toxic effects in comparison to organic sunscreens, which show varying levels of dermal penetration and cutaneous adverse effects. An alternative to N,N-diethyl-m-toluamide (DEET), the traditional gold standard compound in insect repellents, picaridin appears as efficacious, has lower risk of toxicity, and when used simultaneously with sunscreen may decrease percutaneous absorption of both compounds. Conversely, combined use of DEET and sunscreen results in significantly higher absorption of both compounds. It is important to increase consumer awareness of "washing in" of various compounds leading to increased risk of toxicity, as well as differences in reapplication need due to "washing off" caused by water, sweat and abrasion. Although much remains to be studied, to maximize efficacy and decrease toxicity, contemporary research tools, including dermatopharmokinetics, should aid these prospective advances. PMID:26811157

  18. Percutaneous penetration and pharmacodynamics: Wash-in and wash-off of sunscreen and insect repellent.

    PubMed

    Rodriguez, Jocelyn; Maibach, Howard I

    2016-01-01

    Increased awareness of skin cancer and mosquito-transmitted diseases has increased use of insect repellents and sunscreens. The challenge in setting recommendations for use and reapplication, especially when used concomitantly, lies in finding the balance between applying a durable product effective in withstanding natural and physical factors such as water, sweat, temperature and abrasion, while limiting percutaneous absorption and decreasing risk of potential dermal and systemic toxicity. Inorganic sunscreens show no or little percutaneous absorption or toxic effects in comparison to organic sunscreens, which show varying levels of dermal penetration and cutaneous adverse effects. An alternative to N,N-diethyl-m-toluamide (DEET), the traditional gold standard compound in insect repellents, picaridin appears as efficacious, has lower risk of toxicity, and when used simultaneously with sunscreen may decrease percutaneous absorption of both compounds. Conversely, combined use of DEET and sunscreen results in significantly higher absorption of both compounds. It is important to increase consumer awareness of "washing in" of various compounds leading to increased risk of toxicity, as well as differences in reapplication need due to "washing off" caused by water, sweat and abrasion. Although much remains to be studied, to maximize efficacy and decrease toxicity, contemporary research tools, including dermatopharmokinetics, should aid these prospective advances.

  19. Cross contamination of Escherichia coli O157:H7 between lettuce and wash water during home-scale washing.

    PubMed

    Jensen, Dane A; Friedrich, Loretta M; Harris, Linda J; Danyluk, Michelle D; Schaffner, Donald W

    2015-04-01

    Lettuce and leafy greens have been implicated in multiple foodborne disease outbreaks. This study quantifies cross contamination between lettuce pieces in a small-scale home environment. A five-strain cocktail of relevant Escherichia coli O157:H7 strains was used. Bacterial transfer between single inoculated lettuce leaf pieces to 10 non-inoculated lettuce leaf pieces that were washed in a stainless steel bowl of water for 30 s, 1 min, 2 min, and 5 min was quantified. Regardless of washing time, the wash water became contaminated with 90-99% of bacteria originally present on the inoculated lettuce leaf piece. The E. coli O157:H7 concentration on initially inoculated leaf pieces was reduced ∼ 2 log CFU. Each initially uncontaminated lettuce leaf piece had ∼ 1% of the E. coli O157:H7 from the inoculated lettuce piece transferred to it after washing, with more transfer occurring during the shortest (30 s) and longest (5 min) wash times. In all cases the log percent transfer rates were essentially normally distributed. In all scenarios, most of the E. coli O157:H7 (90-99%) transferred from the inoculated lettuce pieces to the wash water. Washing with plain tap water reduces levels of E. coli O157:H7 on the inoculated lettuce leaf pieces, but also spreads contamination to previously uncontaminated leaf pieces. PMID:25475312

  20. Cross contamination of Escherichia coli O157:H7 between lettuce and wash water during home-scale washing.

    PubMed

    Jensen, Dane A; Friedrich, Loretta M; Harris, Linda J; Danyluk, Michelle D; Schaffner, Donald W

    2015-04-01

    Lettuce and leafy greens have been implicated in multiple foodborne disease outbreaks. This study quantifies cross contamination between lettuce pieces in a small-scale home environment. A five-strain cocktail of relevant Escherichia coli O157:H7 strains was used. Bacterial transfer between single inoculated lettuce leaf pieces to 10 non-inoculated lettuce leaf pieces that were washed in a stainless steel bowl of water for 30 s, 1 min, 2 min, and 5 min was quantified. Regardless of washing time, the wash water became contaminated with 90-99% of bacteria originally present on the inoculated lettuce leaf piece. The E. coli O157:H7 concentration on initially inoculated leaf pieces was reduced ∼ 2 log CFU. Each initially uncontaminated lettuce leaf piece had ∼ 1% of the E. coli O157:H7 from the inoculated lettuce piece transferred to it after washing, with more transfer occurring during the shortest (30 s) and longest (5 min) wash times. In all cases the log percent transfer rates were essentially normally distributed. In all scenarios, most of the E. coli O157:H7 (90-99%) transferred from the inoculated lettuce pieces to the wash water. Washing with plain tap water reduces levels of E. coli O157:H7 on the inoculated lettuce leaf pieces, but also spreads contamination to previously uncontaminated leaf pieces.

  1. Respiratory bronchoscopy of subadult American alligators (Alligator mississippiensis) and tracheal wash evaluation.

    PubMed

    Lafortune, Maud; Göbel, Thomas; Jacobson, Elliot; Heard, Darryl; Brown, Dan; Alleman, Rick; Vliet, Kent; Harr, Kendal E; Hernandez, Jorge

    2005-03-01

    Twelve healthy approximately 3-yr-old captive-born 4.5-9 kg American alligators (Alligator mississipiensis) each had bronchoscopy and tracheal washes performed four times during a 10-mo period to evaluate seasonal respiratory microbiology and cytology. Cytologic evaluation of most samples showed a small amount of mucus and low numbers of ciliated columnar epithelium, cubodial epithelium, and keratinized squamous cells. No bacteria or parasites were observed, and there was no seasonal variation in the cytology. No significant bacterial or fungal growth was identified in any season. Hematology performed in the spring and fall evaluations showed seasonal variation in the red blood cell count, hemoglobin concentration, mean corpuscular volume, mean corpuscular hemoglobin concentration, eosinophil count, and thrombocyte count. The lower respiratory tract (at the tracheal level) of healthy subadult alligators appears to be sterile, and cytology is similar to that described in domestic mammals. PMID:17315452

  2. Hydrogeology of the Quitobaquito Springs and La Abra Plain area, Organ Pipe Cactus National Monument, Arizona, and Sonora, Mexico

    USGS Publications Warehouse

    Carruth, R.L.

    1996-01-01

    Quitobaquito Springs, in Organ Pipe Cactus National Monument near the south end of the northwestward-trending Quitobaquito Hills, are less than 0.25 mile north of the international boundary between the United States and Mexico. The National Park Service is concerned that the natural flow from Quitobaquito Springs might be reduced by ground-water withdrawals in the adjacent State of Sonora, Mexico. Quitobaquito and other nearby springs flow from a highly fractured granite that forms the Quitobaquito Hills. Fractures in the granitic intrusive rocks provide conduits for ground water to flow from an alluvial flow system along Aguajita Wash to a line of springs on the southwest side of Quitobaquito Hills. The chemical composition of water from all the springs is similar. Carbon-14 analysis of water from Quitobaquito Springs indicates that the spring water probably is between 500 and several thousand years old. Discharge at Quitobaquito Springs averaged 28 gallons per minute and ranged from 15 to 40 gallons per minute for 1981-92. Rainfall at two gages in the area of recharge to the northeast of Quitobaquito Hills averaged 6.6 inches per year during the 11-year monitoring program ending in September 1992. The lack of correlation between spring discharge and local rainfall indicates that local annual recharge may be small relative to the total quantity of ground water in storage. Surface-geophysical data indicate that a thin alluvial aquifer overlies the shallow crystalline rocks northeast of Quitobaquito Hills along Aguajita Wash. Results of the study indicate that the ground-water flow system along Aguajita Wash provides a source of water to the springs and may be hydraulically connected to the ground-water system that is pumped for agricultural purposes in Mexico. The altitude and low permeability of the granite bedrock near the international boundary, however, may provide a barrier to and (or) delay the effect of a northwestward propagation of water- level declines

  3. Roller belleville spring damper

    SciTech Connect

    Hebel, J.B.

    1981-07-07

    A double acting damper for use in rotary drilling includes a splined tubular telescopic joint and employs plural paralleled stacks of double acting series stacked roller belleville spring washers in an annular pocket between the inner and outer tubular members of the joint. The springs, spline and telescopic bearings are in an oil filled volume sealed from the outside by a pressure seal at the lower end of the damper and a floating seal at the upper end. Electric and magnetic means are provided to check on the condition and quantity of the lubricant.

  4. Washing off intensification of cotton and wool fabrics by ultrasounds.

    PubMed

    Peila, R; Actis Grande, G; Giansetti, M; Rehman, S; Sicardi, S; Rovero, G

    2015-03-01

    Wet textile washing processes were set up for wool and cotton fabrics to evaluate the potential of ultrasound transducers (US) in improving dirt removal. The samples were contaminated with an emulsion of carbon soot in vegetable oil and aged for three hours in fan oven. Before washing, the fabrics were soaked for 3 min in a standard detergent solution and subsequently washed in a water bath. The dirt removal was evaluated through colorimetric measurements. The total color differences ΔE of the samples were measured with respect to an uncontaminated fabric, before and after each washing cycle. The percentage of ΔE variation obtained was calculated and correlated to the dirt removal. The results showed that the US transducers enhanced the dirt removal and temperature was the parameter most influencing the US efficiency on the cleaning process. Better results were obtained at a lower process temperature.

  5. Being washed by someone is therapeutic... and a treat.

    PubMed

    Winterflood, Florence

    2014-08-26

    When in Istanbul, I visited a hamam, a traditional Turkish bath. I'm familiar with other bathing rituals--steam room, sauna, Jacuzzi--but suspected being washed by someone in front of others was not very British.

  6. 11. VIEW LOOKING OUT UPPER LEVEL WINDOW OF WASH HOUSE ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    11. VIEW LOOKING OUT UPPER LEVEL WINDOW OF WASH HOUSE SHOWING SLACK COAL STORAGE TANK - Kaymoor Coal Mine, South side of New River, upstream of New River Gorge Bridge, Fayetteville, Fayette County, WV

  7. 30 CFR 1206.458 - Determination of washing allowances.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... INTERIOR Natural Resources Revenue PRODUCT VALUATION Indian Coal § 1206.458 Determination of washing... bearing. (c) Reporting requirements—(1) Arm's-length contracts. (i) With the exception of those...

  8. 30 CFR 1206.259 - Determination of washing allowances.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... INTERIOR Natural Resources Revenue PRODUCT VALUATION Federal Coal § 1206.259 Determination of washing... not royalty bearing. (c) Reporting requirements—(1) Arm's-length contracts. (i) The lessee must...

  9. 38. Photocopy of ink and wash rendering by N. G. ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    38. Photocopy of ink and wash rendering by N. G. Starkwether in collection of Mr. & Mrs. Richard T. Pratt, Camden REAR ELEVATION OF W. C. PRATT'S COUNTRY SEAT - Camden, Rappahannock River, Port Royal, Caroline County, VA

  10. 17. Photocopy of circa 1839 ink and wash drawing by ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    17. Photocopy of circa 1839 ink and wash drawing by Richard Upjohn in Avery Library, Columbia University, New York, New York FRONT ELEVATION (below) AND REAR ELEVATION (above) - Kingscote, Bellevue Avenue & Bowery Street, Newport, Newport County, RI

  11. 20. Photocopy of ink and wash drawing by Richard Upjohn, ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    20. Photocopy of ink and wash drawing by Richard Upjohn, circa 1839, in Avery Library, Columbia University FIRST AND SECOND FLOOR PLANS - Kingscote, Bellevue Avenue & Bowery Street, Newport, Newport County, RI

  12. 19. Photocopy of circa 1839 ink and wash drawing by ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    19. Photocopy of circa 1839 ink and wash drawing by Richard Upjohn in Avery Library, Columbia University EAST ELEVATION (above) AND SECOND-FLOOR PLAN (below) - Kingscote, Bellevue Avenue & Bowery Street, Newport, Newport County, RI

  13. [The effectiveness of ozonated water for hand washing before surgery].

    PubMed

    Isosu, T; Kan, K; Hayashi, T; Fujii, M

    2001-06-01

    Using an ozonated water-dispensing machine for sterilization of hands (Mediaqua MA-III; Core Medical Co., Ltd, Tokyo, Japan), we investigated the effectiveness of ozonated water as a disinfectant for hand washing before surgery. The effectiveness of this new hand-washing method, using 4 ppm of ozonated water, which is expected to have a short-term bactericidal effect, and 0.2% benzalkonium chloride/83% ethanol solution (Welpas), which is expected to have a long-term bactericidal effect, was compared with that of the conventional hand-washing method (Fürbringer's method using a scrubbing agent containing povidone-iodine). The results showed no significant differences in the numbers of live bacteria and exponential reduction rates in live bacteria. Thus, this new method for hand washing using ozonated water is an effective method for sterilization of the hands before surgery.

  14. 37. Photocopy of ink and wash rendering by N. G. ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    37. Photocopy of ink and wash rendering by N. G. Starkwether in collection of Mr. & Mrs. Richard T. Pratt, Camden SIDE ELEVATION OF ITALIAN VILLA FOR W. C. PRATT, ESQr - Camden, Rappahannock River, Port Royal, Caroline County, VA

  15. Documentation of a decision framework to support enhanced sludge washing

    SciTech Connect

    Brothers, A.J.

    1995-12-31

    This document describes a proposed decision model that, if developed to its fullest, can provide a wide range of analysis options and insights to pretreatment/sludge washing alternatives. A recent decision has been made to terminate this work

  16. Appraisal of guidelines for pre-operative body wash.

    PubMed

    Edström, Elisabet; Westerberg, Lisa; Henricson, Maria

    The pre-operative body wash is a strategy for reducing post-operative infection. However, there is a lack of knowledge about its importance. The purpose of the present study was to evaluate the quality of guidelines for the pre-operative body wash using the AGREE instrument--35 guidelines containing instructions for the pre-operative body wash or preparation were included. The AGREE instrument was employed to establish a quality assessment framework that facilitated a comparison of the guidelines. The results were based on the six domains of the AGREE instrument, all of which were found to have low adherence. Descriptive statistics were used to present the assessment score. The AGREE instrument is useful for evaluating the quality of clinical guidelines. The development of evidence-based guidelines must include clinical activities. Further research is required to clarify the pre-operative body wash process and how it should be performed to reduce post-operative infection. PMID:25426523

  17. Control of helminth contamination of raw vegetables by washing.

    PubMed

    Avcioğlu, Hamza; Soykan, Emel; Tarakci, Umit

    2011-02-01

    This study was conducted to determine the control of helminth egg contamination of raw vegetables by washing. A total of 199 unwashed and 199 washed lettuce, parsley, carrots, dill, rocket, and green-peppers, provided by a catering service in Bursa, Turkey, between March and June 2009, were subjected to helminth egg count under light microscopy. Helminth eggs were detected in six (3.0%) unwashed samples and not in any washed samples (p<0.01). Ascaris lumbricoides and Toxocara spp. were detected in four (2.0%) and two (1.0%) unwashed vegetables, respectively, mostly among leafy vegetables such as lettuce and parsley. Our data confirm that washing procedures before consumption of raw vegetables regardless of the providers' sanitation should be performed to avoid transmission of helminths. PMID:20569015

  18. PARTS WASHING ALTERNATIVES STUDY - UNITED STATES COAST GUARD

    EPA Science Inventory

    This report has been written to assist the United States Coast Guard (USCG) industrial managers in determining the most cost effective and environmentally acceptable parts washing alternatives for their specific applications. An; evaluation was conducted on four different cleane...

  19. SOIL WASHING TREATABILITY TESTS FOR PESTICIDE- CONTAMINATED SOIL

    EPA Science Inventory

    The 1987 Sand Creek Operable Unit 5 record of decision (ROD) identified soil washing as the selected technology to remediate soils contaminated with high levels of organochlorine pesticides, herbicides, and metals. Initial treatability tests conducted to assess the applicability...

  20. 7. CLOSEUP VIEW OF WASHED UP 12' x 12' DAM ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    7. CLOSE-UP VIEW OF WASHED UP 12' x 12' DAM SUPPORT TIMBERS, THREE BEARS LAKE, LOOKING NORTHEAST FROM SOUTH SIDE OF LAKE - Three Bears Lake & Dams, North of Marias Pass, East Glacier Park, Glacier County, MT

  1. 6. VIEW OF THREE BEARS LAKE, SHOWING WASHED UP 12' ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    6. VIEW OF THREE BEARS LAKE, SHOWING WASHED UP 12' x 12' DAM SUPPORT TIMBERS, LOOKING NORTHEAST FROM SOUTH SIDE OF LAKE - Three Bears Lake & Dams, North of Marias Pass, East Glacier Park, Glacier County, MT

  2. Why Is Hand Washing So Important? (For Parents)

    MedlinePlus

    ... Family Campylobacter Infections Hand, Foot, and Mouth Disease MRSA Food Poisoning Diarrhea Tips From School Nurses on ... Hands Without Spreading Germs? Hand Washing Staph Infections MRSA Flu Facts Why Should I Care About Germs? ...

  3. View of Steel Flume Bridge #2 crossing over wash. Looking ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    View of Steel Flume Bridge #2 crossing over wash. Looking downstream, southwest - Childs-Irving Hydroelectric Project, Childs System, Flume Bridge No. 2, Forest Service Road 708/502, Camp Verde, Yavapai County, AZ

  4. BLAISDELL SLOW SAND FILTER WASHING MACHINE. VIEW LOOKING SOUTH. THE ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    BLAISDELL SLOW SAND FILTER WASHING MACHINE. VIEW LOOKING SOUTH. THE OUTSIDE FACE OF THE NORTH WALL OF SETTLING RESERVOIR NO. 3 IS SEEN AT THE RIGHT. THE SETTLING RESERVOIR IS ELEVATED ABOVE THE FILTERING RESERVOIR TO ACHIEVE GRAVITY WATER FLOW FROM THE SETTLING RESERVOIR INTO THE FILTERING RESERVOIR. - Yuma Main Street Water Treatment Plant, Blaisdell Slow Sand Filter Washing Machine, Jones Street at foot of Main Street, Yuma, Yuma County, AZ

  5. Immunotoxicity of washing soda in a freshwater sponge of India.

    PubMed

    Mukherjee, Soumalya; Ray, Mitali; Ray, Sajal

    2015-03-01

    The natural habitat of sponge, Eunapius carteri faces an ecotoxicological threat of contamination by washing soda, a common household cleaning agent of India. Washing soda is chemically known as sodium carbonate and is reported to be toxic to aquatic organisms. Domestic effluent, drain water and various human activities in ponds and lakes have been identified as the major routes of washing soda contamination of water. Phagocytosis and generation of cytotoxic molecules are important immunological responses offered by the cells of sponges against environmental toxins and pathogens. Present study involves estimation of phagocytic response and generation of cytotoxic molecules like superoxide anion, nitric oxide and phenoloxidase in E. carteri under the environmentally realistic concentrations of washing soda. Sodium carbonate exposure resulted in a significant decrease in the phagocytic response of sponge cells under 4, 8, 16 mg/l of the toxin for 96h and all experimental concentrations of the toxin for 192h. Washing soda exposure yielded an initial increase in the generation of the superoxide anion and nitric oxide followed by a significant decrease in generation of these cytotoxic agents. Sponge cell generated a high degree of phenoloxidase activity under the experimental exposure of 2, 4, 8, 16 mg/l of sodium carbonate for 96 and 192 h. Washing soda induced alteration of phagocytic and cytotoxic responses of E. carteri was indicative to an undesirable shift in their immune status leading to the possible crises of survival and propagation of sponges in their natural habitat.

  6. Energy Matters - Spring 2002

    SciTech Connect

    2002-03-01

    Quarterly newsletter from DOE's Industrial Technologies Program to promote the use of energy-efficient industrial systems. The focus of the Spring 2002 Issue of Energy Matters focuses on premium energy efficiency systems, with articles on new gas technologies, steam efficiency, the Augusta Newsprint Showcase, and more.

  7. Spa, springs and safety.

    PubMed

    Sukthana, Yaowalark; Lekkla, Amorn; Sutthikornchai, Chantira; Wanapongse, Paitoon; Vejjajiva, Athasit; Bovornkitti, Somchai

    2005-01-01

    Natural mineral water has long been used worldwide for bathing and health purposes. At present, Thailand is famous for health spas and natural hot springs among local people and tourists. Due to possible risks of exposure to harmful agents, we studied hazardous pollutants at 57 natural hot springs from 11 provinces in northern, central, eastern and southern Thailand. Pathogenic, free-living amebae of the genera Naegleria and Acanthamoeba, which can cause central nervous system infection, were found in 26.3% (15/57) and 15.8% (9/ 57), respectively. Dissolved radon, a soil gas with carcinogenic properties, was present in nearly all hot springs sites, with concentration ranging from 0.87-76,527 Becquerels/m3. There were 5 water samples in which radon concentration exceeded the safety limit for drinking. Legionella pneumoniphila (serogroups 1, 3, 5, 6, 7 10 and 13) were found in samples from 71.9% (41/57) of studied sites. Because spas and natural springs are popular tourist attractions, health authorities should be aware of possible hazards and provide tactful measures and guidelines to ensure safety without causing undue alarm to foreign and Thai tourists.

  8. Echoes of Spring Valley.

    ERIC Educational Resources Information Center

    Boyken, J. Clarine J.

    Designed to preserve the rich heritage of the rural school system which passed from the education scene in the 1930's and 1940's, this narrative, part history and part nostalgia, describes the author's own elementary education and the secure community life centered in the one room Spring Valley School in Hamilton County, Iowa, in the early decades…

  9. Editors' Spring Picks

    ERIC Educational Resources Information Center

    Library Journal, 2011

    2011-01-01

    While they do not represent the rainbow of reading tastes American public libraries accommodate, Book Review editors are a wildly eclectic bunch. One look at their bedside tables and ereaders would reveal very little crossover. This article highlights an eclectic array of spring offerings ranging from print books to an audiobook to ebook apps. It…

  10. A Quadratic Spring Equation

    ERIC Educational Resources Information Center

    Fay, Temple H.

    2010-01-01

    Through numerical investigations, we study examples of the forced quadratic spring equation [image omitted]. By performing trial-and-error numerical experiments, we demonstrate the existence of stability boundaries in the phase plane indicating initial conditions yielding bounded solutions, investigate the resonance boundary in the [omega]…

  11. 1981 Spring Meeting Report

    NASA Astrophysics Data System (ADS)

    Approximately 2150 participants registered for the 1981 Spring Meeting. More than 1500 papers were presented.The spaciousness of the Baltimore Convention Center provided ample opportunity for attendees to exchange ideas and interact with their colleagues. Here are some candid shots.

  12. The News. Spring 2006

    ERIC Educational Resources Information Center

    Giles, Ray, Ed.

    2006-01-01

    This Spring issue of the quarterly newsletter of the Community College League of California contains the following articles: (1) Enrollment Drops; Fees to Blame?; (2) Senate's Grad Proposal Triggers Debate on Mission, Access; (3) Compton Decision has Affected Perceptions of Commission (discussion with Barbara Beno); (4) Dynamic New Architectural…

  13. Planar torsion spring

    NASA Technical Reports Server (NTRS)

    Ihrke, Chris A. (Inventor); Parsons, Adam H. (Inventor); Mehling, Joshua S. (Inventor); Griffith, Bryan Kristian (Inventor)

    2012-01-01

    A torsion spring comprises an inner mounting segment. An outer mounting segment is located concentrically around the inner mounting segment. A plurality of splines extends from the inner mounting segment to the outer mounting segment. At least a portion of each spline extends generally annularly around the inner mounting segment.

  14. Renaissance Administrator, Spring 1998.

    ERIC Educational Resources Information Center

    Dowdy, June P., Ed.

    1998-01-01

    This spring 1998 issue of Renaissance Administrator features the following articles: (1) "Servant Leadership and Higher Education--What is Leadership?" (Richard E. Hasselbach); (2) "Teaching Writing in the 90's--Carnivorous Printers and Dying Grandmothers" (Helen Ruggieri); (3) Assignment--Journal Writing" (Lynn Muscato); and (4) "A Business…

  15. 9. CONTEXTUAL VIEW SOUTHSOUTHEAST TOWARDS SPRING SITE. SPRING LEFT CORNER. ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    9. CONTEXTUAL VIEW SOUTH-SOUTHEAST TOWARDS SPRING SITE. SPRING LEFT CORNER. - Juniata Mill Complex, 22.5 miles Southwest of Hawthorne, between Aurora Crater & Aurora Peak, Hawthorne, Mineral County, NV

  16. Revealing fate of CO2 leakage pathways in the Little Grand Wash Fault, Green River, Utah

    NASA Astrophysics Data System (ADS)

    Han, K.; Han, W. S.; Watson, Z. T.; Guyant, E.; Park, E.

    2015-12-01

    To assure long-term security of geologic carbon sequestration site, evaluation of natural CO2 leakage should be preceded before actual construction of the CO2 facility by comparing natural and artificial reservoir systems. The Little Grand Wash fault is located at the northwestern margin of the Paradox Basin and roles on a bypass of deep subsurface CO2 and brine water onto the surface, e.g., cold water geyser, CO2 spring, and surface travertine deposits. CO2 degassed out from brine at the Little Grand Wash fault zone may react with formation water and minerals while migrating through the fault conduit. Leakage observed by soil CO2 flux on the fault trace shows this ongoing transition of CO2, from supersaturated condition in deep subsurface to shallow surface equilibria. The present study aims to investigate the reactions induced by changes in hydrological and mineralogical factors inside of the fault zone. The methodology to develop site-specific geochemical model of the Little Grand Wash Fault combines calculated mechanical movements of each fluid end-member, along with chemical reactions among fluid, free CO2 gas and rock formations. Reactive transport modeling was conducted to simulate these property changes inside of the fault zone, using chemistry dataset based on 86 effluent samples of CO2 geysers, springs and in situ formation water from Entrada, Carmel, and Navajo Sandstone. Meanwhile, one- and two-dimensional models were separately developed to delineate features mentioned above. The results from the 3000-year simulation showed an appearance of self-sealing processes near the surface of the fault conduit. By tracking physicochemical changes at the depth of 15 m on the 2-dimensional model, significant changes induced by fluid mixing were indicated. Calculated rates of precipitation for calcite, illite, and pyrite showed increase in 2.6 x 10-4, 2.25 x 10-5, and 3.0 x 10-6 in mineral volume fraction at the depth of 15m, respectively. Concurrently

  17. Studying Springs in Series Using a Single Spring

    ERIC Educational Resources Information Center

    Serna, Juan D.; Joshi, Amitabh

    2011-01-01

    Springs are used for a wide range of applications in physics and engineering. Possibly, one of their most common uses is to study the nature of restoring forces in oscillatory systems. While experiments that verify Hooke's law using springs are abundant in the physics literature, those that explore the combination of several springs together are…

  18. Hot Spring Metagenomics

    PubMed Central

    López-López, Olalla; Cerdán, María Esperanza; González-Siso, María Isabel

    2013-01-01

    Hot springs have been investigated since the XIX century, but isolation and examination of their thermophilic microbial inhabitants did not start until the 1950s. Many thermophilic microorganisms and their viruses have since been discovered, although the real complexity of thermal communities was envisaged when research based on PCR amplification of the 16S rRNA genes arose. Thereafter, the possibility of cloning and sequencing the total environmental DNA, defined as metagenome, and the study of the genes rescued in the metagenomic libraries and assemblies made it possible to gain a more comprehensive understanding of microbial communities—their diversity, structure, the interactions existing between their components, and the factors shaping the nature of these communities. In the last decade, hot springs have been a source of thermophilic enzymes of industrial interest, encouraging further study of the poorly understood diversity of microbial life in these habitats. PMID:25369743

  19. Hot spring metagenomics.

    PubMed

    López-López, Olalla; Cerdán, María Esperanza; González-Siso, María Isabel

    2013-01-01

    Hot springs have been investigated since the XIX century, but isolation and examination of their thermophilic microbial inhabitants did not start until the 1950s. Many thermophilic microorganisms and their viruses have since been discovered, although the real complexity of thermal communities was envisaged when research based on PCR amplification of the 16S rRNA genes arose. Thereafter, the possibility of cloning and sequencing the total environmental DNA, defined as metagenome, and the study of the genes rescued in the metagenomic libraries and assemblies made it possible to gain a more comprehensive understanding of microbial communities-their diversity, structure, the interactions existing between their components, and the factors shaping the nature of these communities. In the last decade, hot springs have been a source of thermophilic enzymes of industrial interest, encouraging further study of the poorly understood diversity of microbial life in these habitats. PMID:25369743

  20. The source of groundwater and solutes to Many Devils Wash at a former uranium mill site in Shiprock, New Mexico

    USGS Publications Warehouse

    Robertson, Andrew J.; Ranalli, Anthony J.; Austin, Stephen A.; Lawlis, Bryan R.

    2016-04-21

    The Shiprock Disposal Site is the location of the former Navajo Mill (Mill), a uranium ore-processing facility, located on a terrace overlooking the San Juan River in the town of Shiprock, New Mexico. Following the closure of the Mill, all tailings and associated materials were encapsulated in a disposal cell built on top of the former Mill and tailings piles. The milling operations, conducted at the site from 1954 to 1968, created radioactive tailings and process-related wastes that are now found in the groundwater. Elevated concentrations of constituents of concern—ammonium, manganese, nitrate, selenium, strontium, sulfate, and uranium—have also been measured in groundwater seeps in the nearby Many Devils Wash arroyo, leading to the inference that these constituents originated from the Mill. These constituents have also been reported in groundwater that is associated with Mancos Shale, the bedrock that underlies the site. The objective of this report is to increase understanding of the source of water and solutes to the groundwater beneath Many Devils Wash and to establish the background concentrations for groundwater that is in contact with the Mancos Shale at the site. This report presents evidence on three working hypotheses: (1) the water and solutes in Many Devils Wash originated from the operations at the former Mill, (2) groundwater in deep aquifers is upwelling under artesian pressure to recharge the shallow groundwater beneath Many Devils Wash, and (3) the groundwater beneath Many Devils Wash originates as precipitation that infiltrates into the shallow aquifer system and discharges to Many Devils Wash in a series of springs on the east side of the wash. The solute concentrations in the shallow groundwater of Many Devils Wash would result from the interaction of the water and the Mancos Shale if the source of water was upwelling from deep aquifers or precipitation.In order to compare the groundwater from various wells to groundwater that has been

  1. Spring operated accelerator and constant force spring mechanism therefor

    NASA Technical Reports Server (NTRS)

    Shillinger, G. L., Jr. (Inventor)

    1977-01-01

    A spring assembly consisting of an elongate piece of flat spring material formed into a spiral configuration and a free running spool in circumscribing relation to which this spring is disposed was developed. The spring has a distal end that is externally accessible so that when the distal end is drawn along a path, the spring unwinds against a restoring force present in the portion of the spring that resides in a transition region between a relatively straight condition on the path and a fully wound condition on the spool. When the distal end is released, the distal end is accelerated toward the spool by the force existing at the transition region which force is proportional to the cross-sectional area of the spring.

  2. Evaluating connection of aquifers to springs and streams, Great Basin National Park and vicinity, Nevada

    USGS Publications Warehouse

    Prudic, David E.; Sweetkind, Donald S.; Jackson, Tracie L.; Dotson, K. Elaine; Plume, Russell W.; Hatch, Christine E.; Halford, Keith J.

    2015-12-22

    Groundwater flow from southern Spring Valley continues through the western side of Hamlin Valley before being directed northeast toward the south end of Snake Valley. This flow is constrained by southward-flowing groundwater from Big Spring Wash and northward-flowing groundwater beneath central Hamlin Valley. The redirection to the northeast corresponds to a narrowing of the width of flow in southern Snake Valley caused by a constriction formed by a steeply dipping middle Paleozoic siliciclastic confining unit exposed in the flanks of the mountains and hills on the east side of southern Snake Valley and shallowly buried beneath basin fill in the valley. The narrowing of groundwater flow could be responsible for the large area where groundwater flows to springs or is lost to evapotranspiration between Big Springs in Nevada and Pruess Lake in Utah.

  3. The potential impact of washing machines on laundry malodour generation.

    PubMed

    Stapleton, K; Hill, K; Day, K; Perry, J D; Dean, J R

    2013-04-01

    A multidisciplinary approach has been adopted to investigate and identify the source of malodour in washing machines and the potential for cross-contamination of laundry. Four washing machines were olfactively graded, and the number of colony-forming units (CFUs) bacteria was determined in four specific locations. Then, samples of terry-towel and fleece were washed, without the use of detergent, in the machines, and the occurrence of malodour over a 52-h period was assessed. Analysis of the scrapings from the four locations in the two malodorous machines identified a plethora of volatile organic compounds (VOCs) by either olfactory detection or mass spectral identification post-gas chromatographic separation. In addition, microbiological analysis from the swabs from the four locations within all four washing machines was carried out. Quantitative analysis of VOCs from 66 microbiological isolates from either the washing machines or fabrics was carried out. In total, 10 VOCs were identified: dimethyl disulfide, 3-methyl-1-butanol, 2,4-dithiapentane, dimethyl trisulfide, 2-tridecanone, indole, 2-phenylethanol, isovaleric acid, isobutyric acid and 1-undecene.

  4. Treatment of tunnel wash water and implications for its disposal.

    PubMed

    Hallberg, M; Renman, G; Byman, L; Svenstam, G; Norling, M

    2014-01-01

    The use of road tunnels in urban areas creates water pollution problems, since the tunnels must be frequently cleaned for traffic safety reasons. The washing generates extensive volumes of highly polluted water, for example, more than fivefold higher concentrations of suspended solids compared to highway runoff. The pollutants in the wash water have an affinity for particulate material, so sedimentation should be a viable treatment option. In this study, 12 in situ sedimentation trials were carried out on tunnel wash water, with and without addition of chemical flocculent. Initial suspended solids concentration ranged from 804 to 9,690 mg/L. With sedimentation times of less than 24 hours and use of a chemical flocculent, it was possible to reach low concentrations of suspended solids (<15 mg/L), PAH (<0.1 μg/L), As (<1.0 μg/L), Cd (<0.05 μg/L), Hg (<0.02 μg/L), Fe (<200 μg/L), Ni (<8 μg/L), Pb (<0.5 μg/L), Zn (<60 μg/L) and Cr (<8 μg/L). Acute Microtox(®) toxicity, mainly attributed to detergents used for the tunnel wash, decreased significantly at low suspended solids concentrations after sedimentation using a flocculent. The tunnel wash water did not inhibit nitrification. The treated water should be suitable for discharge into recipient waters or a wastewater treatment plant.

  5. Treatment of car wash wastewater by UF membranes

    NASA Astrophysics Data System (ADS)

    Istirokhatun, Titik; Destianti, Puti; Hargianintya, Adenira; Oktiawan, Wiharyanto; Susanto, Heru

    2015-12-01

    The existence of car wash service facilitates car owners to remove dirt and grime from their vehicles. However, the dirt washed off vehicles as well as the cleaning materials themselves may be harmful to the environment if they are not properly managed and discharged. Many technologies have been proposed to treat car wash wastewater such as coagulation flocculation, tricking filter and flocculation-flotation. Nevertheless, these technologies have low efficiency to eliminate oil and small organic compounds. Ultrafiltration (UF) membranes were used in this study to treat car wash wastewater. This study investigated the performance of UF membranes under various pressures to remove COD, oil and grease, and also turbidity from car wash waste water. The membrane performance was examined by investigation of permeate flux and membrane rejection. The results meet the standard of environmental regulation and it is possible to be reused. The highest rejection was shown by PES10 (polyethersulfone 10 kDa) in 1 bar operation with complete rejection for both turbidity and oil and grace and 95% rejection for COD.

  6. Seepage investigation and selected hydrologic data for the Escalante River drainage basin, Garfield and Kane Counties, Utah, 1909-2002

    USGS Publications Warehouse

    Wilberg, Dale E.; Stolp, Bernard J.

    2005-01-01

    This report contains the results of an October 2001 seepage investigation conducted along a reach of the Escalante River in Utah extending from the U.S. Geological Survey streamflow-gaging station near Escalante to the mouth of Stevens Canyon. Discharge was measured at 16 individual sites along 15 consecutive reaches. Total reach length was about 86 miles. A reconnaissance-level sampling of water for tritium and chlorofluorcarbons was also done. In addition, hydrologic and water-quality data previously collected and published by the U.S. Geological Survey for the 2,020-square-mile Escalante River drainage basin was compiled and is presented in 12 tables. These data were collected from 64 surface-water sites and 28 springs from 1909 to 2002. None of the 15 consecutive reaches along the Escalante River had a measured loss or gain that exceeded the measurement error. All discharge measurements taken during the seepage investigation were assigned a qualitative rating of accuracy that ranged from 5 percent to greater than 8 percent of the actual flow. Summing the potential error for each measurement and dividing by the maximum of either the upstream discharge and any tributary inflow, or the downstream discharge, determined the normalized error for a reach. This was compared to the computed loss or gain that also was normalized to the maximum discharge. A loss or gain for a specified reach is considered significant when the loss or gain (normalized percentage difference) is greater than the measurement error (normalized percentage error). The percentage difference and percentage error were normalized to allow comparison between reaches with different amounts of discharge. The plate that accompanies the report is 36' by 40' and can be printed in 16 tiles, 8.5 by 11 inches. An index for the tiles is located on the lower left-hand side of the plate. Using Adobe Acrobat, the plate can be viewed independent of the report; all Acrobat functions are available.

  7. Monitoring receptor trafficking following retromer and WASH deregulation.

    PubMed

    Osborne, Douglas G; Phillips-Krawczak, Christine A; Billadeau, Daniel D

    2015-01-01

    Cell surface receptors that have been internalized and enter the endocytic pathway have multiple fates including entrance into the multivesicular body pathway on their way to lysosomal degradation, recycling back to the cell surface, or retrograde trafficking out of the endolysosomal system back to the Golgi apparatus. Two ubiquitously expressed protein complexes, WASH and the endosomal coat complex retromer, function together to play a central role in directing the fate of receptors into the latter two pathways. In this chapter, we describe fluorescent- and flow cytometry-based methods for analyzing the recycling and retrograde trafficking of two receptors, α5β1 and CI-M6PR, whose intracellular fates are regulated by WASH and retromer activity. The guidelines presented in this chapter can be applied to the analysis of any cell surface or intracellular membrane protein to determine the impact of WASH or retromer deregulation on its intracellular trafficking route. PMID:26360036

  8. Electrical Switchability and Dry-Wash Durability of Conductive Textiles

    NASA Astrophysics Data System (ADS)

    Wu, Bangting; Zhang, Bowu; Wu, Jingxia; Wang, Ziqiang; Ma, Hongjuan; Yu, Ming; Li, Linfan; Li, Jingye

    2015-06-01

    There is growing interest in the area of conductive textiles in the scientific and industrial community. Herein, we successfully prepared a conductive textile via covalently grafting polyaniline (PANI) onto cotton by a multi-step treatment process. The conductivity of the resultant fabric could be tuned by immersing in water having different pH values. The conductive and insulating properties of the textile could be conveniently switched by alternately immersing in acidic and alkaline bath solutions. Most importantly, the resultant conductive fabrics were able to withstand 40 simulated dry-wash cycles, with almost no decay in the electrical conductivity, indicating their excellent dry-wash durability. The present strategy for fabricating conductive fabrics with excellent switchability of electrical properties and dry-wash durability is expected to provide inspiration for the production of multifunctional conductive textiles for use in hash or sensitive conditions.

  9. Wash-out in N2-dominated leptogenesis

    NASA Astrophysics Data System (ADS)

    Hahn-Woernle, F.

    2010-08-01

    We study the wash-out of a cosmological baryon asymmetry produced via leptogenesis by subsequent interactions. Therefore we focus on a scenario in which a lepton asymmetry is established in the out-of-equilibrium decays of the next-to-lightest right-handed neutrino. We apply the full classical Boltzmann equations without the assumption of kinetic equilibrium and including all quantum statistical factors to calculate the wash-out of the lepton asymmetry by interactions of the lightest right-handed state. We include scattering processes with top quarks in our analysis. This is of particular interest since the wash-out is enhanced by scatterings and the use of mode equations with quantum statistical distribution functions. In this way we provide a restriction on the parameter space for this scenario.

  10. Electrical Switchability and Dry-Wash Durability of Conductive Textiles

    PubMed Central

    Wu, Bangting; Zhang, Bowu; Wu, Jingxia; Wang, Ziqiang; Ma, Hongjuan; Yu, Ming; Li, Linfan; Li, Jingye

    2015-01-01

    There is growing interest in the area of conductive textiles in the scientific and industrial community. Herein, we successfully prepared a conductive textile via covalently grafting polyaniline (PANI) onto cotton by a multi-step treatment process. The conductivity of the resultant fabric could be tuned by immersing in water having different pH values. The conductive and insulating properties of the textile could be conveniently switched by alternately immersing in acidic and alkaline bath solutions. Most importantly, the resultant conductive fabrics were able to withstand 40 simulated dry-wash cycles, with almost no decay in the electrical conductivity, indicating their excellent dry-wash durability. The present strategy for fabricating conductive fabrics with excellent switchability of electrical properties and dry-wash durability is expected to provide inspiration for the production of multifunctional conductive textiles for use in hash or sensitive conditions. PMID:26066704

  11. Washing and caustic leaching of Hanford Tank C-106 sludge

    SciTech Connect

    Lumetta, G.J.; Wagner, M.J.; Hoopes, F.V.; Steele, R.T.

    1996-10-01

    This report describes the results of a laboratory-scale washing and caustic leaching test performed on sludge from Hanford Tank C-106. The purpose of this test was to determine the behavior of important sludge components when subjected to washing with dilute or concentrated sodium hydroxide solutions. The results of this laboratory-scale test were used to support the design of a bench-scale washing and leaching process used to prepare several hundred grams of high-level waste solids for vitrification tests to be done by private contractors. The laboratory-scale test was conducted at Pacific Northwest Laboratory in FY 1996 as part of the Hanford privatization effort. The work was funded by the US Department of Energy through the Tank Waste Remediation System (TWRS; EM-30).

  12. Gravity and magnetic study of Yucca Wash, southwest Nevada

    SciTech Connect

    Langenheim, V.E.; Ponce, D.A.; Oliver, H.W.; Sikora, R.F.

    1993-12-31

    Gravity and ground magnetic data were collected along five traverses across and one traverse along Yucca Wash in the southwest quadrant of the Nevada Test Site. Two additional ground magnetic profiles were collected approximately 100 m to either side of the longitudinal profile. These data do not indicate major vertical offsets greater than 100 m using a density contrast of 0.2 to 0.3 g/cm{sup 3} along the proposed Yucca Wash fault. A broad magnetic high coincides with the location of the hydrologic gradient. Density profiling, a technique used to determine the average density of small topographic features, suggests that the density of near-surface material in the vicinity of Yucca Wash is about 2.0 g/cm{sup 3}.

  13. Increasing hand washing compliance with a simple visual cue.

    PubMed

    Ford, Eric W; Boyer, Brian T; Menachemi, Nir; Huerta, Timothy R

    2014-10-01

    We tested the efficacy of a simple, visual cue to increase hand washing with soap and water. Automated towel dispensers in 8 public bathrooms were set to present a towel either with or without activation by users. We set the 2 modes to operate alternately for 10 weeks. Wireless sensors were used to record entry into bathrooms. Towel and soap consumption rates were checked weekly. There were 97,351 hand-washing opportunities across all restrooms. Towel use was 22.6% higher (P=.05) and soap use was 13.3% higher (P=.003) when the dispenser presented the towel without user activation than when activation was required. Results showed that a visual cue can increase hand-washing compliance in public facilities. PMID:24228670

  14. Improving protein array performance: focus on washing and storage conditions.

    PubMed

    Nath, Nidhi; Hurst, Robin; Hook, Brad; Meisenheimer, Poncho; Zhao, Kate Q; Nassif, Nadine; Bulleit, Robert F; Storts, Douglas R

    2008-10-01

    For protein microarrays, maintaining protein stability during the slide processing steps of washing, drying, and storage is of major concern. Although several studies have focused on the stability of immobilized antibodies in antibody microarrays, studies on protein-protein interaction arrays and enzyme arrays are lacking. In this paper we used five bait-prey protein interaction pairs and three enzymes to optimize the washing, drying, and storage conditions for protein arrays. The protein arrays for the study were fabricated by combining HaloTag technology and cell-free protein expression. The HaloTag technology, in combination with cell-free expression, allowed rapid expression and immobilization of fusion proteins on hydrogel-coated glass slides directly from cell extracts without any prior purification. Experimental results indicate enzyme captured on glass slides undergoes significant loss of activity when washed and spin-dried using only phosphate buffer, as is typically done with antibody arrays. The impact of washing and spin-drying in phosphate buffer on protein-protein interaction arrays was minimal. However, addition of 5% glycerol to the wash buffer helps retain enzyme activity during washing and drying. We observed significant loss of enzyme activity when slides were stored dry at 4 degrees C, however immobilized enzymes remained active for 30 days when stored at -20 degrees C in 50% glycerol. We also found that cell-free extract containing HaloTag-fused enzymes could undergo multiple freeze/thaw cycles without any adverse impact on enzyme activity. The findings indicate that for large ongoing studies, proteins of interest expressed in cell-free extract can be stored at -70 degrees C and repeatedly used to print small batches of protein array slides to be used over a few weeks.

  15. BLAISDELL SLOW SAND FILTER WASHING MACHINE. VIEW LOOKING SOUTHEAST. THE ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    BLAISDELL SLOW SAND FILTER WASHING MACHINE. VIEW LOOKING SOUTHEAST. THE ELECTRIC TROLLEY IS SEEN AT THE LEFT. THE BULKHEAD SEEN AT THE LOWER RIGHT IS NOT PART OF THE MACHINE; IT WAS INSTALLED TO RETAIN THE FILTER SAND AFTER THE MACHINE WAS NO LONGER USED. THE NORTHWEST CORNER OF SETTLING RESERVOIR NO. 4 IS SEEN IN THE DISTANCE BELOW THE RIGHT SIDE OF THE TROLLEY. - Yuma Main Street Water Treatment Plant, Blaisdell Slow Sand Filter Washing Machine, Jones Street at foot of Main Street, Yuma, Yuma County, AZ

  16. BLAISDELL SLOW SAND FILTER WASHING MACHINE. VIEW LOOKING SOUTH. THE ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    BLAISDELL SLOW SAND FILTER WASHING MACHINE. VIEW LOOKING SOUTH. THE SUCTION (INTAKE) HOSE IS SEEN AT THE LEFT RESTING ON THE FILTER BED SURFACE; THE DISCHARGE HOSE IS AT THE RIGHT, RUNNING FROM THE BOTTOM OF THE CENTRAL VERTICAL AXLE TO THE CENTRIFUGAL PUMP. FROM THE PUMP WATER IS DISCHARGED THROUGH THE HORIZONTAL PIPE LOCATED UNDER THE EDGE OF PLATFORM DECK INTO THE WASTE-WATER TROUGH (NOT SEEN IN THIS VIEW). - Yuma Main Street Water Treatment Plant, Blaisdell Slow Sand Filter Washing Machine, Jones Street at foot of Main Street, Yuma, Yuma County, AZ

  17. 100 Area soil washing bench-scale test procedures

    SciTech Connect

    Freeman, H.D.; Gerber, M.A.; Mattigod, S.V.; Serne, R.J.

    1993-03-01

    This document describes methodologies and procedures for conducting soil washing treatability tests in accordance with the 100 Area Soil Washing Treatability Test Plan (DOE-RL 1992, Draft A). The objective of this treatability study is to evaluate the use of physical separation systems and chemical extraction methods as a means of separating chemically and radioactively contaminated soil fractions from uncontaminated soil fractions. These data will be primarily used for determining feasibility of the individual unit operations and defining the requirements for a system, or systems, for pilot-scale testing.

  18. Washing the patient: dignity and aesthetic values in nursing care.

    PubMed

    Pols, Jeannette

    2013-07-01

    Dignity is a fundamental concept, but its meaning is not clear. This paper attempts to clarify the term by analysing and reconnecting two meanings of dignity: humanitas and dignitas. Humanitas refers to citizen values that protect individuals as equal to one another. Dignitas refers to aesthetic values embedded in genres of sociality that relate to differences between people. The paper explores these values by way of an empirical ethical analysis of practices of washing psychiatric patients in nursing care. Nurses legitimate the washing of reluctant patients with reference to dignity. The analysis shows the intertwinement of humanitas and dignitas that gives dignity its fundamental meaning.

  19. Lomonosov In Spring

    NASA Technical Reports Server (NTRS)

    2004-01-01

    26 September 2004 This blue wide angle Mars Global Surveyor (MGS) Mars Orbiter Camera (MOC) image shows the frost-covered rims of Lomonosov Crater in late martian spring. At the north (top) end of the image, low, ground-hugging fog can be seen in association with the retreating seasonal polar cap. Lomonosov Crater is about 150 km (93 mi) in diameter and located at 65oN, 9oW. The image is illuminated by sunlight from the lower left.

  20. Southern Mars: It's Spring!

    NASA Technical Reports Server (NTRS)

    1999-01-01

    August 2, 1999, marks the spring equinox for the martian southern hemisphere. It is also the start of autumn for regions north of the equator. Winter in the south has finally come to a close, and the seasonal frosts of the wintertime south polar cap are retreating. Small, local dust storms frequently occur along the margins of the polar cap, as the colder air blowing off the cap moves northward into warmer regions.

    The wide angle camera view of Mars shown here was obtained by the Mars Global Surveyor Mars Orbiter Camera in late July 1999, about 1 week before the start of southern spring. The frosty, retreating south polar cap (white) is seen in the lower quarter of the image, and wisps of dust storm clouds (grayish-orange in this view) occur just above the cap at the lower left. The southern most of the large environmental changes volcanoes, Arsia Mons, is seen at the upper left. Arsia Mons is about 350 kilometers(220 miles) across.

    Malin Space Science Systems and the California Institute of Technology built the MOC using spare hardware from the Mars Observer mission. MSSS operates the camera from its facilities in San Diego, CA. The Jet Propulsion Laboratory's Mars Surveyor Operations Project operates the Mars Global Surveyor spacecraft with its industrial partner, Lockheed Martin Astronautics, from facilities in Pasadena, CA and Denver, CO.

  1. Effect of Detention Basin Release Rates on Flood Flows - Application of a Model to the Blackberry Creek Watershed in Kane County, Illinois

    USGS Publications Warehouse

    Soong, David T.; Murphy, Elizabeth A.; Straub, Timothy D.

    2009-01-01

    The effects of stormwater detention basins with specified release rates are examined on the watershed scale with a Hydrological Simulation Program - FORTRAN (HSPF) continuous-simulation model. Modeling procedures for specifying release rates from detention basins with orifice and weir discharge configurations are discussed in this report. To facilitate future detention modeling as a tool for watershed management, a chart relating watershed impervious area to detention volume is presented. The report also presents a case study of the Blackberry Creek watershed in Kane County, Ill., a rapidly urbanizing area seeking to avoid future flood damages from increased urbanization, to illustrate the effects of various detention basin release rates on flood peaks and volumes and flood frequencies. The case study compares flows simulated with a 1996 land-use HSPF model to those simulated with four different 2020 projected land-use HSPF model scenarios - no detention, and detention basins with release rates of 0.08, 0.10, and 0.12 cubic feet per second per acre (ft3/s-acre), respectively. Results of the simulations for 15 locations, which included the downstream ends of all tributaries and various locations along the main stem, showed that a release rate of 0.10 ft3/s-acre, in general, can maintain postdevelopment 100-year peak-flood discharge at a similar magnitude to that of 1996 land-use conditions. Although the release rate is designed to reduce the 100-year peak flow, reduction of the 2-year peak flow is also achieved for a smaller proportion of the peak. Results also showed that the 0.10 ft3/s-acre release rate was less effective in watersheds with relatively high percentages of preexisting (1996) development than in watersheds with less preexisting development.

  2. Understanding wash efficiency and chloride transfer in copper solvent extraction

    NASA Astrophysics Data System (ADS)

    Burkhardt, D. J.

    2003-07-01

    Carryover of entrained aqueous from primary leaching operations into copper electrowinning electrolytes introduces impurities that can affect cathode quality and cause corrosion. As a result, more operations are introducing wash stages in their solvent extraction circuits in an attempt to dilute these entrainments with high-quality water.

  3. DEMONSTRATION BULLETIN: SOIL/SEDIMENT WASHING SYSTEM BERGMANN USA

    EPA Science Inventory

    The Bergmann USA Soil/Sediment Washing System is a waste minimization technique designed to separate or "partition" soils and sediments by grain size and density. In this water-based volume reduction process, hazardous contaminants are concentrated into a small residual portion...

  4. Cadmium Removal from Rice by Separating and Washing Protein Isolate.

    PubMed

    Huo, Yinqiang; Du, Hongying; Xue, Bingying; Niu, Meng; Zhao, Siming

    2016-06-01

    In this study detoxification of 3 Chinese Cd-contaminated cultivars (Jinyou463, Yuchi, and Xiangzaoxian 32) of rice was explored. By separation with an alkaline method, Cd concentrations of the starch isolates were decreased from 0.2769, 0.4037, and 0.5156 mg/kg in starting milled rice to 0.1056, 0.1585, and 0.1923 mg/kg, respectively. However, the Cd concentrations reached up to 2.5905, 3.1628, and 4.8593 mg/kg in the protein isolates, respectively. Therefore, 10 common acids in food industry were investigated to remove Cd from protein isolate by washing process. The optimal washing conditions were 0.5 M citric acid, acid to rice protein isolate ratio of 6:1 v/w, shaking time of 1 h at room temperature. The rice protein isolate showed a significant decrease in Cd concentration and the removal efficiency was more than 95% after 2 washings at optimized conditions. Rice proteins were not degraded at all and had very little loss during citric acid washing process. The study presents a promising way of depurating Cd-contaminated rice, and meanwhile it reduces the risk of heavy metal causing food safety issues effectively. PMID:27159878

  5. BERGMANN USA SOIL SEDIMENT WASHING TECHNOLOGY - APPLICATIONS ANALYSIS REPORT

    EPA Science Inventory

    This document provides an evaluation of the performance of the Bergmann USA Soil/Sediment Washing System and its applicability for the treatment of soils or sediments contaminated with organic and/or inorganic compounds. Both the technical and economic aspects of the technology w...

  6. 14. VARIOUS OUTBUILDINGS: a) OCTAGONAL STRUCTURE (center): WASH HOUSE b) ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    14. VARIOUS OUTBUILDINGS: a) OCTAGONAL STRUCTURE (center): WASH HOUSE b) SQUARE BUILDING WITH HIPPED ROOF (right front): SMOKEHOUSE c) BRICK BUILDING WITH END CHIMNEYS (left front): KITCHEN AND COOK'S BUILDING d) LONG BRICK BUILDING (in background): SERVANTS' QUARTERS (?) - Colonel McNeal House, Union & Bills Streets, Bolivar, Hardeman County, TN

  7. Conservation of water for washing beef heads at harvest.

    PubMed

    DeOtte, R E; Spivey, K S; Galloway, H O; Lawrence, T E

    2010-03-01

    The objective of this research was to develop methods to conserve water necessary to cleanse beef heads prior to USDA-FSIS inspection. This was to be accomplished by establishing a baseline for the minimum amount of water necessary to adequately wash a head and application of image analysis to provide an objective measure of head cleaning. Twenty-one beef heads were manually washed during the harvest process. An average 18.75 L (2.49 SD) and a maximum of 23.88 L were required to cleanse the heads to USDA-FSIS standards. Digital images were captured before and after manual washing then evaluated for percentage red saturation using commercially available image analysis software. A decaying exponential curve extracted from these data indicated that as wash water increased beyond 20 L the impact on red saturation decreased. At 4 sigma from the mean of 18.75 L, red saturation is 16.0 percent, at which logistic regression analysis indicates 99.994 percent of heads would be accepted for inspection, or less than 1 head in 15,000 would be rejected. Reducing to 3 sigma would increase red saturation to 27.6 percent, for which 99.730 percent of heads likely would be accepted (less than 1 in 370 would be rejected). PMID:20374798

  8. Radioactive demonstration of the ``late wash`` Precipitate Hydrolysis Process

    SciTech Connect

    Bibler, N.E.; Ferrara, D.M.; Ha, B.C.

    1992-06-30

    This report presents results of the radioactive demonstration of the DWPF Precipitate Hydrolysis Process as it would occur in the ``late wash`` flowsheet in the absence of hydroxylamine nitrate. Radioactive precipitate containing Cs-137 from the April, 1983, in-tank precipitation demonstration in Tank 48 was used for these tests.

  9. Radioactive demonstration of the late wash'' Precipitate Hydrolysis Process

    SciTech Connect

    Bibler, N.E.; Ferrara, D.M.; Ha, B.C.

    1992-06-30

    This report presents results of the radioactive demonstration of the DWPF Precipitate Hydrolysis Process as it would occur in the late wash'' flowsheet in the absence of hydroxylamine nitrate. Radioactive precipitate containing Cs-137 from the April, 1983, in-tank precipitation demonstration in Tank 48 was used for these tests.

  10. Ink and Wash Painting for Children with Visual Impairment

    ERIC Educational Resources Information Center

    Shih, Chih-Ming; Chao, Hsin-Yi

    2010-01-01

    Five children with visual impairments received instruction in drawing, using ink and wash painting and calligraphy techniques. A special system developed by a blind Taiwanese Chinese calligrapher, Tsann-Cherng Liaw, was used to help the children orient and refine their work. Children's performance on simple drawing tasks was compared before and…

  11. 18. Photocopy of circa 1839 ink and wash drawing by ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    18. Photocopy of circa 1839 ink and wash drawing by Richard Upjohn in Avery Library, Columbia University ELEVATION OF ENTRANCE FRONT (above) AND PRELIMINARY OR PARTIAL FIRST FLOOR PLAN WITH TWO SMALL ELEVATION SKETCHES (below) - Kingscote, Bellevue Avenue & Bowery Street, Newport, Newport County, RI

  12. Identification of Enterobacteriaceae from washed and unwashed commercial shell eggs.

    PubMed

    Musgrove, Michael T; Jones, Deana R; Northcutt, Julie K; Cox, Nelson A; Harrison, Mark A

    2004-11-01

    To evaluate the effect of processing on the safety and quality of retail shell eggs, a storage study was conducted with unwashed and commercially washed eggs. This work demonstrated that commercial processing decreased microbial contamination of eggshells. To know which species persisted during storage on washed or unwashed eggs, Enterobacteriaceae isolates were selected and identified biochemically. For each of three replications, shell eggs were purchased from a commercial processing plant, transported back to the laboratory, and stored at 4 degrees C. Once a week for 6 weeks, 12 eggs for each treatment (washed and unwashed control) were rinsed in sterile phosphate-buffered saline. A 1-ml aliquot of each sample was plated onto violet red bile glucose agar with overlay and incubated at 37 degrees C for 24 h. Following incubation, plates were observed for colonies characteristic of the family Enterobacteriaceae. A maximum of 10 isolates per positive sample were streaked for isolation before being identified to the genus or species level using commercially available biochemical strips. Although most of the isolates from the unwashed control eggs belonged to the genera Escherichia or Enterobacter, many other genera and species were identified. These included Citrobacter, Klebsiella, Kluyvera, Pantoea, Providencia, Rahnella, Salmonella, Serratia, and Yersinia. Non-Enterobacteriaceae also recovered from the unwashed egg samples included Xanthomonas and Flavimonas. Very few washed egg samples were contaminated with any of these bacteria. These data provide useful information on the effectiveness of processing in removing microorganisms from commercial shell eggs.

  13. WASHING STUDIES FOR PCP AND CREOSOTE-CONTAMINATED SOIL

    EPA Science Inventory

    The Environmental Protection Agency has conducted a series of bench-scale and pilot-scale studies to evaluate the feasibility of washing pentachlorophenol (PCP) and creosote from the soil at an abandoned wood-treatment Superfund site in Pensacola, FL. The high sand content and lo...

  14. Conservation of water for washing beef heads at harvest.

    PubMed

    DeOtte, R E; Spivey, K S; Galloway, H O; Lawrence, T E

    2010-03-01

    The objective of this research was to develop methods to conserve water necessary to cleanse beef heads prior to USDA-FSIS inspection. This was to be accomplished by establishing a baseline for the minimum amount of water necessary to adequately wash a head and application of image analysis to provide an objective measure of head cleaning. Twenty-one beef heads were manually washed during the harvest process. An average 18.75 L (2.49 SD) and a maximum of 23.88 L were required to cleanse the heads to USDA-FSIS standards. Digital images were captured before and after manual washing then evaluated for percentage red saturation using commercially available image analysis software. A decaying exponential curve extracted from these data indicated that as wash water increased beyond 20 L the impact on red saturation decreased. At 4 sigma from the mean of 18.75 L, red saturation is 16.0 percent, at which logistic regression analysis indicates 99.994 percent of heads would be accepted for inspection, or less than 1 head in 15,000 would be rejected. Reducing to 3 sigma would increase red saturation to 27.6 percent, for which 99.730 percent of heads likely would be accepted (less than 1 in 370 would be rejected).

  15. 30 CFR 206.458 - Determination of washing allowances.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... life of the reserves which the wash plant services, whichever is appropriate, or a unit of production... breached its duty to the lessor to market the production for the mutual benefit of the lessee and the... based on a dollar-per-unit basis, the lessee shall convert whatever consideration is paid to a...

  16. 35. Photocopy of detail of ink and wash rendering by ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    35. Photocopy of detail of ink and wash rendering by N. G. Starkwether in collection of Mr. & Mrs. Richard T. Pratt, Camden ELEVATIONS OF ITALIAN VILLA FOR WILLIAM C. PRATT - CAMDEN PLACE - RIVER FRONT - Camden, Rappahannock River, Port Royal, Caroline County, VA

  17. 36. Photocopy of detail of ink and wash rendering by ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    36. Photocopy of detail of ink and wash rendering by N. G. Starkwether in collection of Mr. & Mrs. Richard T. Pratt, Camden ELEVATIONS OF ITALIAN VILLA FOR WILLIAM C. PRATT - CAMDEN PLACE - DRIVE FRONT - Camden, Rappahannock River, Port Royal, Caroline County, VA

  18. Ultrasonic system for continuous washing of textiles in liquid layers.

    PubMed

    Gallego-Juarez, Juan A; Riera, Enrique; Acosta, Victor; Rodríguez, Germán; Blanco, Alfonso

    2010-01-01

    The use of ultrasonic energy for washing of textiles has been tried several times without achieving practical development. In fact, the softness of the fibres makes the cavitation to produce small erosion effect and the reticulate structure of the fabric favours the formation of air bubble layers which obstruct wave penetration. In addition, a high proportion of water with respect to the wash load and a certain water degassing is required to assure efficiency and homogeneity in the wash performance. Such requirements have hindered the commercial development of the ultrasonic washing machines for domestic purposes. For specific industrial applications, a great part of these limitations may be overcome. This article deals with a new process in which the fabric is exposed to the ultrasonic field in a flat format. Such process has been implemented at laboratory and at semi-industrial stage by using specially designed power ultrasonic transducers with rectangular plate radiators. The cleaning effect is produced by the intense cavitation field generated by the plate radiator within a thin layer of liquid where the fabric is introduced. The homogeneity of such effect is achieved by the successive exposure of all the fabric areas to the intense acoustic field. In this paper the structure and performance of the developed system are shown.

  19. 1. GENERAL VIEW FROM BONY PILE LOOKING SOUTH. WASH HOUSE ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    1. GENERAL VIEW FROM BONY PILE LOOKING SOUTH. WASH HOUSE IN LEFT BACKGROUND. TIPPLE AND CLEANING PLANT TO RIGHT. IN CENTER IS A TANK USED FOR TREATING MINE REFUSE AND ACID RUNOFF. - Eureka No. 40, Tipple & Cleaning Plant, East of State Route 56, north of Little Paint Creek, Scalp Level, Cambria County, PA

  20. 62. May 1985. NORTH END OF WASH HOUSE (Negative slightly ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    62. May 1985. NORTH END OF WASH HOUSE (Negative slightly reticulated. Tree behind fence is common fig, Ficus carica.) - Borough House, West Side State Route 261, about .1 mile south side of junction with old Garners Ferry Road, Stateburg, Sumter County, SC

  1. 21 CFR 211.52 - Washing and toilet facilities.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 21 Food and Drugs 4 2013-04-01 2013-04-01 false Washing and toilet facilities. 211.52 Section 211.52 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) DRUGS: GENERAL CURRENT GOOD MANUFACTURING PRACTICE FOR FINISHED PHARMACEUTICALS Buildings and...

  2. 21 CFR 211.52 - Washing and toilet facilities.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 21 Food and Drugs 4 2012-04-01 2012-04-01 false Washing and toilet facilities. 211.52 Section 211.52 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) DRUGS: GENERAL CURRENT GOOD MANUFACTURING PRACTICE FOR FINISHED PHARMACEUTICALS Buildings and...

  3. 21 CFR 211.52 - Washing and toilet facilities.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 21 Food and Drugs 4 2014-04-01 2014-04-01 false Washing and toilet facilities. 211.52 Section 211.52 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) DRUGS: GENERAL CURRENT GOOD MANUFACTURING PRACTICE FOR FINISHED PHARMACEUTICALS Buildings and...

  4. 21 CFR 211.52 - Washing and toilet facilities.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 4 2010-04-01 2010-04-01 false Washing and toilet facilities. 211.52 Section 211.52 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) DRUGS: GENERAL CURRENT GOOD MANUFACTURING PRACTICE FOR FINISHED PHARMACEUTICALS Buildings and...

  5. 21 CFR 211.52 - Washing and toilet facilities.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 21 Food and Drugs 4 2011-04-01 2011-04-01 false Washing and toilet facilities. 211.52 Section 211.52 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) DRUGS: GENERAL CURRENT GOOD MANUFACTURING PRACTICE FOR FINISHED PHARMACEUTICALS Buildings and...

  6. Hand Washing Among School Children in Bogotá, Colombia

    PubMed Central

    Lopez-Quintero, Catalina; Freeman, Paul

    2009-01-01

    Objectives. We assessed hand-washing behaviors and intentions among school children in Bogotá, Colombia, to help identify and overcome barriers to proper hygiene practices. Methods. Data on hand-washing behavior and intentions and individual and contextual factors were collected from 2042 sixth- through eighth-grade students in 25 schools in Bogotá via anonymous questionnaires. A member of the school administration or teaching staff completed a questionnaire about the school environment. Site inspections of bathroom facilities were conducted. Results. Only 33.6% of the sample reported always or very often washing hands with soap and clean water before eating and after using the toilet. About 7% of students reported regular access to soap and clean water at school. A high level of perceived control was the strongest predictor of positive hand-washing intentions (adjusted odds ratio [AOR] = 6.0; 95% confidence interval [CI] = 4.8, 7.5). Students with proper hand-washing behavior were less likely to report previous-month gastrointestinal symptoms (OR = 0.8; 95% CI = 0.6, 0.9) or previous-year school absenteeism (OR = 0.7; 95% CI = 0.6, 0.9). Conclusions. Scarcity of adequate facilities in most schools in Bogotá prevents children from adopting proper hygienic behavior and thwarts health promotion efforts. The current renovation program of public schools in Bogotá provides a unique opportunity to meet the challenges of providing a supportive environment for adoption of healthy behaviors. PMID:19008513

  7. Bifurcation Instability of sheet metal during spring-back

    NASA Astrophysics Data System (ADS)

    Kim, Jong-Bong; Yang, Dong-Yol; Yoon, Jeong Whan

    2013-05-01

    In automotive and home appliance industries, there are many complex-shaped sheet metal components which need to be fabricated in multiple stamping operations. For example, the manufacturing of an outer case of washing machine consists of stamping followed by a bending operation. After the first stage of the stamping process, a large amount of spring-back takes place, and therefore, it is difficult to proceed to the next stage of the bending process. In the stamping process of that kind of sheet component with low geometric constraint, the forming area is large compared to the forming depth. Therefore, the formed part is in an unstable state and is less geometrically constrained, which causes a large amount of spring-back. To investigate this phenomenon, finite element analyses are carried out. During a spring-back analysis after forming, bifurcation takes place and the finite element solution procedure using the Newton-Raphson scheme becomes unstable. To get a stable post-bifurcation solution, a bifurcation algorithm is introduced at the bifurcation point. The deformed shapes obtained from finite element analyses are in good agreement with the experimental data. From this study, it is shown that the bifurcation behaviour enlarges the spring-back and the degree of dimensional error. To obtain additional possible post-bifurcation solutions, non-bifurcation analyses using initial guesses obtained in a modal analysis are carried. For the initial guesses, lowed four eigenmodes are utilized. Finally, the post-bifurcation behaviour and spring-back amount are investigated for various process parameters including the forming depth, punch width and corner radius.

  8. Spring loaded thermocouple module

    DOEpatents

    McKelvey, T.E.; Guarnieri, J.J.

    1984-03-13

    A thermocouple arrangement is provided for mounting in a blind hole of a specimen. The thermocouple arrangement includes a cup-like holder member, which receives an elongated thermal insulator, one end of which is seated at an end wall of the holder. A pair of thermocouple wires, threaded through passageways in the insulator, extend beyond the insulator member, terminating in free ends which are joined together in a spherical weld bead. A spring, held captive within the holder, applies a bias force to the weld bead, through the insulator member. The outside surface of the holder is threaded for engagement with the blind hole of the specimen. When the thermocouple is installed in the specimen, the spherical contact surface of the weld bead is held in contact with the end wall of the blind hole, with a predetermined bias force.

  9. Spring loaded thermocouple module

    DOEpatents

    McKelvey, Thomas E.; Guarnieri, Joseph J.

    1985-01-01

    A thermocouple arrangement is provided for mounting in a blind hole of a specimen. The thermocouple arrangement includes a cup-like holder member, which receives an elongated thermal insulator, one end of which is seated at an end wall of the holder. A pair of thermocouple wires, threaded through passageways in the insulator, extend beyond the insulator member, terminating in free ends which are joined together in a spherical weld bead. A spring, held captive within the holder, applies a bias force to the weld bead, through the insulator member. The outside surface of the holder is threaded for engagement with the blind hole of the specimen. When the thermocouple is installed in the specimen, the spherical contact surface of the weld bead is held in contact with the end wall of the blind hole, with a predetermined bias force.

  10. Dissipation and Removal of the Etofenprox Residue during Processing in Spring Onion.

    PubMed

    Hwang, Kyu-Won; Bang, Woo-Suk; Jo, Hyeong-Wook; Moon, Joon-Kwan

    2015-08-01

    The dissipation and removal of the etofenprox residue was studied in spring onion grown under greenhouse conditions. Samples of spring onion were collected at 0, 1, 2, 4, 6, 8, 10, 12, and 14 days after last application, and removal rates of etofenprox by washing and drying processes were measured. Samples were extracted with acetone and partitioned with dichloromethane. The dichloromethane layer was then concentrated, cleaned up with florisil column chromatography, and analyzed with high-performance liquid chromatography-ultraviolet detector (HPLC-UVD). At the fortification levels of 0.5, 1.0, and 10 mg/kg, recoveries ranged from 92.0 to 107.7%, with a coefficient of variation of 4.3-7.9% (n = 3). The method limit of quantification (MLOQ) was found to be 0.05 mg/kg in spring onion. The half-lives of etofenprox in spring onion were found to be 9.5 and 7.9 days, at the single or double application rates. Removal rates of etofenprox were 21.6-43.9 and 66.6-88.5% by various washing or drying processes, respectively.

  11. Experimenting with Inexpensive Plastic Springs

    ERIC Educational Resources Information Center

    Perez, Leander; Marques, Adriana; Sánchez, Iván

    2014-01-01

    Acommon undergraduate laboratory experience is the determination of the elastic constant of a spring, whether studying the elongation under a static load or studying the damped harmonic motion of the spring with a suspended mass. An alternative approach to this laboratory experience has been suggested by Menezes et al., aimed at studying the…

  12. Spring loaded locator pin assembly

    DOEpatents

    Groll, Todd A.; White, James P.

    1998-01-01

    This invention deals with spring loaded locator pins. Locator pins are sometimes referred to as captured pins. This is a mechanism which locks two items together with the pin that is spring loaded so that it drops into a locator hole on the work piece.

  13. Spring loaded locator pin assembly

    DOEpatents

    Groll, T.A.; White, J.P.

    1998-03-03

    This invention deals with spring loaded locator pins. Locator pins are sometimes referred to as captured pins. This is a mechanism which locks two items together with the pin that is spring loaded so that it drops into a locator hole on the work piece. 5 figs.

  14. Single-Crystal Springs For Accelerometers

    NASA Technical Reports Server (NTRS)

    Vanzandt, Thomas R.; Kaiser, William J.; Kenny, Thomas W.

    1995-01-01

    Thermal noise reduced, enabling use of smaller proof masses. Spring-and-mass accelerometers in which springs made of single-crystal material being developed. In spring-and-mass accelerometer, proof mass attached to one end of spring, and acceleration of object at other end of spring measured in terms of deflection of spring, provided frequency spectrum of acceleration lies well below resonant frequency of spring-and-proof-mass system. Use of single-crystal spring materials instead of such polycrystalline spring materials as ordinary metals makes possible to construct highly sensitive accelerometers (including seismometers) with small proof masses.

  15. Mallow Springs, County Cork, Ireland

    NASA Astrophysics Data System (ADS)

    Aldwell, C. R.

    1996-03-01

    Because of its copious and reliable rainfall, Ireland has an abundance of springs. Many of the larger ones issue from the Carboniferous limestone that occurs in over 40% of the country. The spring water is mainly a calcium bicarbonate type with a temperature of about 10°C. In the 18th century, warm and cold springs were developed as spas in various parts of Ireland. The popularity of these springs was short and most were in major decline by 1850. Today only one cold spa at Lisdoonvarna, Co. Clare is still operating. Springs in Ireland were places of religious significance for the pre-Christian Druidic religion. In the Christian period they became holy wells, under the patronage of various saints. Cures for many different ailments were attributed to water from these wells.

  16. Apparatus for washing particulate material. [Removal of silicone oil from microspheres by trichloroethylene

    DOEpatents

    Rivera, A.L.; Fowler, V.L.; Justice, G.V.

    1983-12-29

    Transport of nuclear fuel microspheres through a wash liquid is facilitated by feeding a slurry containing the microspheres into the wash liquid via a column having a vibrating tubular screen located under its lower end.

  17. Linear magnetic spring and spring/motor combination

    NASA Technical Reports Server (NTRS)

    Patt, Paul J. (Inventor); Stolfi, Fred R. (Inventor)

    1991-01-01

    A magnetic spring, or a spring and motor combination, providing a linear spring force characteristic in each direction from a neutral position, in which the spring action may occur for any desired coordinate of a typical orthogonal coordinate system. A set of magnets are disposed, preferably symmetrically about a coordinate axis, poled orthogonally to the desired force direction. A second set of magnets, respectively poled opposite the first set, are arranged on the sprung article. The magnets of one of the sets are spaced a greater distance apart than those of the other, such that an end magnet from each set forms a pair having preferably planar faces parallel to the direction of spring force, the faces being offset so that in a neutral position the outer edge of the closer spaced magnet set is aligned with the inner edge of the greater spaced magnet set. For use as a motor, a coil can be arranged with conductors orthogonal to both the magnet pole directions and the direction of desired spring force, located across from the magnets of one set and fixed with respect to the magnets of the other set. In a cylindrical coordinate system having axial spring force, the magnets are radially poled and motor coils are concentric with the cylinder axis.

  18. COMPILATION OF LABORATORY SCALE ALUMINUM WASH AND LEACH REPORT RESULTS

    SciTech Connect

    HARRINGTON SJ

    2011-01-06

    This report compiles and analyzes all known wash and caustic leach laboratory studies. As further data is produced, this report will be updated. Included are aluminum mineralogical analysis results as well as a summation of the wash and leach procedures and results. Of the 177 underground storage tanks at Hanford, information was only available for five individual double-shell tanks, forty-one individual single-shell tanks (e.g. thirty-nine 100 series and two 200 series tanks), and twelve grouped tank wastes. Seven of the individual single-shell tank studies provided data for the percent of aluminum removal as a function of time for various caustic concentrations and leaching temperatures. It was determined that in most cases increased leaching temperature, caustic concentration, and leaching time leads to increased dissolution of leachable aluminum solids.

  19. Effectiveness of a nonrinse, alcohol-free antiseptic hand wash.

    PubMed

    Moadab, A; Rupley, K F; Wadhams, P

    2001-06-01

    This study evaluated the efficacy of a novel surfactant, allantoin, and benzalkonium chloride hand sanitizer using the US Food and Drug Administration's method for testing antiseptic hand washes that podiatric physicians and other health-care personnel use. The alcohol-free product, HandClens, was compared with an alcohol-based product, Purell. Independent researchers from the California College of Podiatric Medicine conducted the study using 40 volunteer students from the class of 2001. The results show that HandClens outperformed Purell and met the regulatory requirements for a hand sanitizer. Purell failed as an antimicrobial hand wash and was less effective than a control soap used in the study. PMID:11420346

  20. A Wash-Free Homogeneous Colorimetric Immunoassay Method

    PubMed Central

    Liu, Huiqiao; Rong, Pengfei; Jia, Hongwei; Yang, Jie; Dong, Bo; Dong, Qiong; Yang, Cejun; Hu, Pengzhi; Wang, Wei; Liu, Haitao; Liu, Dingbin

    2016-01-01

    Rapid and convenient biosensing platforms could be beneficial to timely diagnosis and treatment of diseases in virtually any care settings. Sandwich immunoassays, the most commonly used methods for protein detection, often rely on expensive tags such as enzyme and tedious wash and incubation procedures operated by skilled labor. In this report, we revolutionized traditional sandwich immunoassays by providing a wash-free homogeneous colorimetric immunoassay method without requirement of any separation steps. The proposed strategy was realized by controlling the growth of gold nanoparticles (AuNPs) to mediate the interparticle spacing in the protein-AuNP oligomers. We have demonstrated the successful in vitro detection of cancer biomarker in serum samples from patients with high clinical sensitivity and specificity. PMID:26722373

  1. Inactivation of viruses using novel protein A wash buffers.

    PubMed

    Bolton, Glen R; Selvitelli, Keith R; Iliescu, Ionela; Cecchini, Douglas J

    2015-01-01

    Low pH viral inactivation is typically performed in the eluate pool following the protein A capture step during the manufacturing of monoclonal antibodies and Fc-fusion proteins. However, exposure to low pH has the potential to alter protein quality. To avoid these difficulties, novel wash buffers capable of inactivating viruses while antibodies or Fc-fusion proteins were bound to protein A or mixed mode resins were developed. By equilibrating the column in high salt buffer (2 M ammonium sulfate or 3 M sodium chloride) after loading, the hydrophobic interactions between antibodies and protein A ligands were increased enough to prevent elution at pH 3. The ammonium sulfate was also found to cause binding of an antibody to a mixed mode cation exchange and a mixed mode anion exchange resin at pH values that caused elution in conventional cation and anion exchange resins (pH 3.5 for Capto Adhere and pH 8.0 for Capto MMC), indicating that retention was due to enhanced hydrophobic interactions. The potential of the 2 M ammonium sulfate pH 3 buffer, a 1 M arginine buffer, and a buffer containing the detergent LDAO to inactivate XMuLV virus when used as protein A wash buffers with a 1 hour contact time were studied. The high salt and detergent containing wash buffers provided about five logs of removal, determined using PCR, and complete combined removal and inactivation (> 6 logs), determined by measuring infectivity. The novel protein A washes could provide more rapid, automated viral inactivation steps with lower pool conductivities.

  2. 33 CFR 157.162 - Crude oil washing during a voyage.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 33 Navigation and Navigable Waters 2 2011-07-01 2011-07-01 false Crude oil washing during a voyage... OIL IN BULK Crude Oil Washing (COW) System on Tank Vessels Cow Operations § 157.162 Crude oil washing... § 157.10c(b)(2) shall ensure that each cargo tank that is crude oil washed during a voyage other than...

  3. 33 CFR 157.162 - Crude oil washing during a voyage.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 33 Navigation and Navigable Waters 2 2010-07-01 2010-07-01 false Crude oil washing during a voyage... OIL IN BULK Crude Oil Washing (COW) System on Tank Vessels Cow Operations § 157.162 Crude oil washing... § 157.10c(b)(2) shall ensure that each cargo tank that is crude oil washed during a voyage other than...

  4. Hand Washing Practices Among Emergency Medical Services Providers

    PubMed Central

    Bucher, Joshua; Donovan, Colleen; Ohman-Strickland, Pamela; McCoy, Jonathan

    2015-01-01

    Introduction Hand hygiene is an important component of infection control efforts. Our primary and secondary goals were to determine the reported rates of hand washing and stethoscope cleaning in emergency medical services (EMS) workers, respectively. Methods We designed a survey about hand hygiene practices. The survey was distributed to various national EMS organizations through e-mail. Descriptive statistics were calculated for survey items (responses on a Likert scale) and subpopulations of survey respondents to identify relationships between variables. We used analysis of variance to test differences in means between the subgroups. Results There were 1,494 responses. Overall, reported hand hygiene practices were poor among pre-hospital providers in all clinical situations. Women reported that they washed their hands more frequently than men overall, although the differences were unlikely to be clinically significant. Hygiene after invasive procedures was reported to be poor. The presence of available hand sanitizer in the ambulance did not improve reported hygiene rates but improved reported rates of cleaning the stethoscope (absolute difference 0.4, p=0.0003). Providers who brought their own sanitizer were more likely to clean their hands. Conclusion Reported hand hygiene is poor amongst pre-hospital providers. There is a need for future intervention to improve reported performance in pre-hospital provider hand washing. PMID:26587098

  5. Generation of chlorine by-products in simulated wash water.

    PubMed

    Shen, Cangliang; Norris, Pauline; Williams, Olivia; Hagan, Stephanie; Li, KaWang

    2016-01-01

    Free chlorine (FC) reacting with organic matter in wash water promotes the formation of chlorine by-products. This study aims to evaluate the dynamic impact of FC and organic load on the generation of haloacetic acids (HAAs) and trihalomethanes (THMs) in simulated wash water. Lettuce juice was sequentially added into FC solution with FC periodically replenished. Water samples were collected after each lettuce juice addition to measure water qualities and determine HAAs and THMs using US-Environmental-Protection-Agency (EPA) methods. Concentrations of 88-2103 μg/l of total HAAs and 20.79-859.47 μg/l of total THMs were detected during the study. Monobromoacetic, tribromoacetic, chlorodibromoacetic and trichloroacetic acid were the major HAAs components. Chloroform (trichloromethane) was the primary THMs present. A significant correlation of HAAs with chemical oxygen demand and THMs with FC was observed. Results indicated that optimizing wash water sanitizing systems to limit organic matters and maintain minimal effective FC concentration is critical.

  6. Wash-out of ambient air contaminations for breath measurements.

    PubMed

    Maurer, F; Wolf, A; Fink, T; Rittershofer, B; Heim, N; Volk, T; Baumbach, J I; Kreuer, S

    2014-06-01

    In breath analysis, ambient air contaminations are ubiquitous and difficult to eliminate. This study was designed to investigate the reduction of ambient air background by a lung wash-out with synthetic air. The reduction of the initial ambient air volatile organic compound (VOC) intensity was investigated in the breath of 20 volunteers inhaling synthetic air via a sealed full face mask in comparison to inhaling ambient air. Over a period of 30 minutes, breath analysis was conducted using ion mobility spectrometry coupled to a multi-capillary column. A total of 68 VOCs were identified for inhaling ambient air or inhaling synthetic air. By treatment with synthetic air, 39 VOCs decreased in intensity, whereas 29 increased in comparison to inhaling ambient air. In total, seven VOCs were significantly reduced (P-value < 0.05). A complete wash-out of VOCs in this setting was not observed, whereby a statistically significant reduction up to 65% as for terpinolene was achieved. Our setting successfully demonstrated a reduction of ambient air contaminations from the airways by a lung wash-out with synthetic air.

  7. Recovery of MSWI and soil washing residues as concrete aggregates.

    PubMed

    Sorlini, Sabrina; Abbà, Alessandro; Collivignarelli, Carlo

    2011-02-01

    The aim of the present work was to study if municipal solid waste incinerator (MSWI) residues and aggregates derived from contaminated soil washing could be used as alternative aggregates for concrete production. Initially, chemical, physical and geometric characteristics (according to UNI EN 12620) of municipal solid waste incineration bottom ashes and some contaminated soils were evaluated; moreover, the pollutants release was evaluated by means of leaching tests. The results showed that the reuse of pre-treated MSWI bottom ash and washed soil is possible, either from technical or environmental point of view, while it is not possible for the raw wastes. Then, the natural aggregate was partially and totally replaced with these recycled aggregates for the production of concrete mixtures that were characterized by conventional mechanical and leaching tests. Good results were obtained using the same dosage of a high resistance cement (42.5R calcareous Portland cement instead of 32.5R); the concrete mixture containing 400 kg/m(3) of washed bottom ash and high resistance cement was classified as structural concrete (C25/30 class). Regarding the pollutants leaching, all concrete mixtures respected the limit values according to the Italian regulation. PMID:20537523

  8. Recovery of MSWI and soil washing residues as concrete aggregates.

    PubMed

    Sorlini, Sabrina; Abbà, Alessandro; Collivignarelli, Carlo

    2011-02-01

    The aim of the present work was to study if municipal solid waste incinerator (MSWI) residues and aggregates derived from contaminated soil washing could be used as alternative aggregates for concrete production. Initially, chemical, physical and geometric characteristics (according to UNI EN 12620) of municipal solid waste incineration bottom ashes and some contaminated soils were evaluated; moreover, the pollutants release was evaluated by means of leaching tests. The results showed that the reuse of pre-treated MSWI bottom ash and washed soil is possible, either from technical or environmental point of view, while it is not possible for the raw wastes. Then, the natural aggregate was partially and totally replaced with these recycled aggregates for the production of concrete mixtures that were characterized by conventional mechanical and leaching tests. Good results were obtained using the same dosage of a high resistance cement (42.5R calcareous Portland cement instead of 32.5R); the concrete mixture containing 400 kg/m(3) of washed bottom ash and high resistance cement was classified as structural concrete (C25/30 class). Regarding the pollutants leaching, all concrete mixtures respected the limit values according to the Italian regulation.

  9. Status and progress in sludge washing: A pivotal pretreatment method

    SciTech Connect

    Barton, W.B.; MacLean, G.T.; Meng, C.D.; Winkler, C.M.

    1995-01-01

    Separation of the bulk soluble chemical salts from the insoluble metal hydroxides and radionuclides is central to the strategy of disposing Hanford tank waste. Sludge washing and caustic leaching have been selected as the primary methods for processing the 230 million L (61,000,000 gal) of Hanford tank waste. These processes are very similar to those selected for processing waste at the West Valley Site in New York and the Savannah River Site in South Carolina. The purpose of sludge washing is to dissolve and remove the soluble salts in the waste. Leaching of the insoluble solids with caustic will be used to dissolve aluminum hydroxide and chromium hydroxide, and convert insoluble bismuth phosphate to soluble phosphate. The waste will be separated into a high-level solids fraction and a liquid fraction that can be disposed of as low-level waste after cesium removal. The washing and leaching operations involve batchwise mixing, settling, and decanting within the existing underground storage tanks.

  10. Evaluation of soil washing for radiologically contaminated soils

    SciTech Connect

    Gombert, D. II

    1994-03-01

    Soil washing has been applied internationally to decontaminate soils due to the widespread increase in environmental awareness manifested in the United States by promulgation of the Comprehensive Environmental Response, Compensation and Liability Act, yet we continue to lack understanding on why the technique works in one application and not in another. A soil washing process typically integrates a variety of modules, each designed to decontaminate the matrix by destroying a particular phase or segregating a particle size fraction in which the contaminants are concentrated. The more known about how the contaminants are fixed, the more likely the process will succeed. Much can be learned from bioavailability studies on heavy metals in soils. Sequential extraction experiments designed to destroy one fixation mechanism at a time can be used to determine how contaminants are bound. This knowledge provides a technical basis for designing a processing strategy to efficiently decontaminate soil while creating a minimum of secondary wastes. In this study, a soil from the Idaho National Engineering Laboratory was physically and chemically characterized, then sequentially extracted to determine if soil washing could be effectively used to remove cesium, cobalt and chromium.

  11. Generation of chlorine by-products in simulated wash water.

    PubMed

    Shen, Cangliang; Norris, Pauline; Williams, Olivia; Hagan, Stephanie; Li, KaWang

    2016-01-01

    Free chlorine (FC) reacting with organic matter in wash water promotes the formation of chlorine by-products. This study aims to evaluate the dynamic impact of FC and organic load on the generation of haloacetic acids (HAAs) and trihalomethanes (THMs) in simulated wash water. Lettuce juice was sequentially added into FC solution with FC periodically replenished. Water samples were collected after each lettuce juice addition to measure water qualities and determine HAAs and THMs using US-Environmental-Protection-Agency (EPA) methods. Concentrations of 88-2103 μg/l of total HAAs and 20.79-859.47 μg/l of total THMs were detected during the study. Monobromoacetic, tribromoacetic, chlorodibromoacetic and trichloroacetic acid were the major HAAs components. Chloroform (trichloromethane) was the primary THMs present. A significant correlation of HAAs with chemical oxygen demand and THMs with FC was observed. Results indicated that optimizing wash water sanitizing systems to limit organic matters and maintain minimal effective FC concentration is critical. PMID:26212946

  12. Continuous hydrologic simulation and flood-frequency, hydraulic, and flood-hazard analysis of the Blackberry Creek watershed, Kane County, Illinois

    USGS Publications Warehouse

    Soong, David T.; Straub, Timothy D.; Murphy, Elizabeth A.

    2006-01-01

    Results of hydrologic model, flood-frequency, hydraulic model, and flood-hazard analysis of the Blackberry Creek watershed in Kane County, Illinois, indicate that the 100-year and 500-year flood plains range from approximately 25 acres in the tributary F watershed (a headwater subbasin at the northeastern corner of the watershed) to almost 1,800 acres in Blackberry Creek main stem. Based on 1996 land-cover data, most of the land in the 100-year and 500-year flood plains was cropland, forested and wooded land, and grassland. A relatively small percentage of urban land was in the flood plains. The Blackberry Creek watershed has undergone rapid urbanization in recent decades. The population and urbanized lands in the watershed are projected to double from the 1990 condition by 2020. Recently, flood-induced damage has occurred more frequently in urbanized areas of the watershed. There are concerns about the effect of urbanization on flood peaks and volumes, future flood-mitigation plans, and potential effects on the water quality and stream habitats. This report describes the procedures used in developing the hydrologic models, estimating the flood-peak discharge magnitudes and recurrence intervals for flood-hazard analysis, developing the hydraulic model, and the results of the analysis in graphical and tabular form. The hydrologic model, Hydrological Simulation Program-FORTRAN (HSPF), was used to perform the simulation of continuous water movements through various patterns of land uses in the watershed. Flood-frequency analysis was applied to an annual maximum series to determine flood quantiles in subbasins for flood-hazard analysis. The Hydrologic Engineering Center-River Analysis System (HEC-RAS) hydraulic model was used to determine the 100-year and 500-year flood elevations, and to determine the 100-year floodway. The hydraulic model was calibrated and verified using high water marks and observed inundation maps for the July 17-18, 1996, flood event. Digital

  13. Fostering hand washing before lunch by students attending a special needs young adult program.

    PubMed

    Walmsley, Christopher; Mahoney, Amanda; Durgin, Amy; Poling, Alan

    2013-01-01

    A multiple baseline across groups design was used to investigate the effects of a treatment package on hand washing before lunch by five students with disabilities who attended a young adult educational program. To evaluate hand washing, a lotion called Glo Germ was applied to participants' hands. Glo Germ is visible under a black light, which allowed the quality of hand washing to be assessed by comparing the amount visible before and after hand washing using a 3-point scale. Following a baseline period in which hand washing was assessed, participants were exposed to a hand washing training procedure, which improved one participant's hand washing. Next, a lottery system was imposed in which the number of lottery tickets earned each day depended on the quality of hand washing, specifically, on the rating assigned (0, 1, or 2). This condition was associated with improved hand washing by the other four participants. Finally, a condition adding feedback to the lottery system resulted in further improvements in the quality of hand washing for all participants. Follow up data indicated modest maintenance of hand washing after lunch. These results suggest that treatment packages similar to that used in the present study merit further investigation and that Glo Germ is of value in ascertaining the quality of hand washing. PMID:22940163

  14. Fostering hand washing before lunch by students attending a special needs young adult program.

    PubMed

    Walmsley, Christopher; Mahoney, Amanda; Durgin, Amy; Poling, Alan

    2013-01-01

    A multiple baseline across groups design was used to investigate the effects of a treatment package on hand washing before lunch by five students with disabilities who attended a young adult educational program. To evaluate hand washing, a lotion called Glo Germ was applied to participants' hands. Glo Germ is visible under a black light, which allowed the quality of hand washing to be assessed by comparing the amount visible before and after hand washing using a 3-point scale. Following a baseline period in which hand washing was assessed, participants were exposed to a hand washing training procedure, which improved one participant's hand washing. Next, a lottery system was imposed in which the number of lottery tickets earned each day depended on the quality of hand washing, specifically, on the rating assigned (0, 1, or 2). This condition was associated with improved hand washing by the other four participants. Finally, a condition adding feedback to the lottery system resulted in further improvements in the quality of hand washing for all participants. Follow up data indicated modest maintenance of hand washing after lunch. These results suggest that treatment packages similar to that used in the present study merit further investigation and that Glo Germ is of value in ascertaining the quality of hand washing.

  15. 21 CFR 864.9285 - Automated cell-washing centrifuge for immuno-hematology.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 21 Food and Drugs 8 2014-04-01 2014-04-01 false Automated cell-washing centrifuge for immuno... Establishments That Manufacture Blood and Blood Products § 864.9285 Automated cell-washing centrifuge for immuno-hematology. (a) Identification. An automated cell-washing centrifuge for immuno-hematology is a device...

  16. 21 CFR 864.9285 - Automated cell-washing centrifuge for immuno-hematology.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 21 Food and Drugs 8 2013-04-01 2013-04-01 false Automated cell-washing centrifuge for immuno... Establishments That Manufacture Blood and Blood Products § 864.9285 Automated cell-washing centrifuge for immuno-hematology. (a) Identification. An automated cell-washing centrifuge for immuno-hematology is a device...

  17. 21 CFR 864.9285 - Automated cell-washing centrifuge for immuno-hematology.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 21 Food and Drugs 8 2011-04-01 2011-04-01 false Automated cell-washing centrifuge for immuno... Establishments That Manufacture Blood and Blood Products § 864.9285 Automated cell-washing centrifuge for immuno-hematology. (a) Identification. An automated cell-washing centrifuge for immuno-hematology is a device...

  18. 21 CFR 864.9285 - Automated cell-washing centrifuge for immuno-hematology.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 21 Food and Drugs 8 2012-04-01 2012-04-01 false Automated cell-washing centrifuge for immuno... Establishments That Manufacture Blood and Blood Products § 864.9285 Automated cell-washing centrifuge for immuno-hematology. (a) Identification. An automated cell-washing centrifuge for immuno-hematology is a device...

  19. 21 CFR 864.9285 - Automated cell-washing centrifuge for immuno-hematology.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Automated cell-washing centrifuge for immuno... Establishments That Manufacture Blood and Blood Products § 864.9285 Automated cell-washing centrifuge for immuno-hematology. (a) Identification. An automated cell-washing centrifuge for immuno-hematology is a device...

  20. 40 CFR 447.10 - Applicability; description of the oil-base solvent wash ink subcategory.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ...-base solvent wash ink subcategory. 447.10 Section 447.10 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS INK FORMULATING POINT SOURCE CATEGORY Oil-Base Solvent Wash Ink Subcategory § 447.10 Applicability; description of the oil-base solvent wash...

  1. 40 CFR 447.10 - Applicability; description of the oil-base solvent wash ink subcategory.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ...-base solvent wash ink subcategory. 447.10 Section 447.10 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS INK FORMULATING POINT SOURCE CATEGORY Oil-Base Solvent Wash Ink Subcategory § 447.10 Applicability; description of the oil-base solvent wash...

  2. Live-line insulator washing: Experimental investigation to assess safety and efficiency requirements

    SciTech Connect

    Perin, D.; Pigini, A.; Visintainer, I.; Channakeshava; Ramamoorty, M.

    1994-12-31

    A laboratory investigation was carried out to study live-line washing of insulators, with special attention to the two washing procedures which adopt hand-held nozzles or helicopter mounted nozzles. The aspects related to safety and those related to efficiency and reliability were considered. On the basis of the results, safe working distances and indications to define optimal washing procedures were derived.

  3. Impact of alternative antimicrobial commercial egg washes on reducing Salmonella contamination

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Introduction: Table eggs are washed with an alkaline detergent at approximately pH 11 and at a temperature at least 32°C, followed by a chlorine rinse. Both wash temperature and an antimicrobial rinse are required by regulation, but wash pH is not specified. At this pH, little, if any, free chlorine...

  4. 33 CFR 157.112 - Approved Crude Oil Washing Operations and Equipment Manual.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 33 Navigation and Navigable Waters 2 2011-07-01 2011-07-01 false Approved Crude Oil Washing... RELATING TO TANK VESSELS CARRYING OIL IN BULK Crude Oil Washing (COW) System on Tank Vessels General § 157.112 Approved Crude Oil Washing Operations and Equipment Manual. If the manuals submitted under §...

  5. 33 CFR 157.112 - Approved Crude Oil Washing Operations and Equipment Manual.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 33 Navigation and Navigable Waters 2 2010-07-01 2010-07-01 false Approved Crude Oil Washing... RELATING TO TANK VESSELS CARRYING OIL IN BULK Crude Oil Washing (COW) System on Tank Vessels General § 157.112 Approved Crude Oil Washing Operations and Equipment Manual. If the manuals submitted under §...

  6. 33 CFR 157.114 - Crude Oil Washing Operations and Equipment Manual: Not approved.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 33 Navigation and Navigable Waters 2 2010-07-01 2010-07-01 false Crude Oil Washing Operations and... RELATING TO TANK VESSELS CARRYING OIL IN BULK Crude Oil Washing (COW) System on Tank Vessels General § 157.114 Crude Oil Washing Operations and Equipment Manual: Not approved. If the manuals submitted...

  7. 33 CFR 157.114 - Crude Oil Washing Operations and Equipment Manual: Not approved.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 33 Navigation and Navigable Waters 2 2011-07-01 2011-07-01 false Crude Oil Washing Operations and... RELATING TO TANK VESSELS CARRYING OIL IN BULK Crude Oil Washing (COW) System on Tank Vessels General § 157.114 Crude Oil Washing Operations and Equipment Manual: Not approved. If the manuals submitted...

  8. Testing the Effects of Social Norms and Behavioral Privacy on Hand Washing: A Field Experiment

    ERIC Educational Resources Information Center

    Lapinski, Maria Knight; Maloney, Erin K.; Braz, Mary; Shulman, Hillary C.

    2013-01-01

    A 2-part study examines the influence of normative messages on college males' hand washing perceptions and behaviors. Study 1 tests for the appropriateness of hand washing as a target of social norms campaigns and tests messages designed to change perceived descriptive norms. Results indicated that hand washing behavior is appropriate for health…

  9. 7 CFR 57.801 - Nest run or washed ungraded eggs.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 7 Agriculture 3 2013-01-01 2013-01-01 false Nest run or washed ungraded eggs. 57.801 Section 57... Identification of Restricted Eggs Or Egg Products Not Intended for Human Consumption § 57.801 Nest run or washed ungraded eggs. Nest run or washed ungraded eggs are exempt from the labeling provisions in §...

  10. 7 CFR 57.801 - Nest run or washed ungraded eggs.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 7 Agriculture 3 2014-01-01 2014-01-01 false Nest run or washed ungraded eggs. 57.801 Section 57... Identification of Restricted Eggs Or Egg Products Not Intended for Human Consumption § 57.801 Nest run or washed ungraded eggs. Nest run or washed ungraded eggs are exempt from the labeling provisions in §...

  11. 7 CFR 57.801 - Nest run or washed ungraded eggs.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 7 Agriculture 3 2012-01-01 2012-01-01 false Nest run or washed ungraded eggs. 57.801 Section 57... Identification of Restricted Eggs Or Egg Products Not Intended for Human Consumption § 57.801 Nest run or washed ungraded eggs. Nest run or washed ungraded eggs are exempt from the labeling provisions in §...

  12. 7 CFR 57.801 - Nest run or washed ungraded eggs.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 7 Agriculture 3 2010-01-01 2010-01-01 false Nest run or washed ungraded eggs. 57.801 Section 57... Identification of Restricted Eggs Or Egg Products Not Intended for Human Consumption § 57.801 Nest run or washed ungraded eggs. Nest run or washed ungraded eggs are exempt from the labeling provisions in §...

  13. 7 CFR 57.801 - Nest run or washed ungraded eggs.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 7 Agriculture 3 2011-01-01 2011-01-01 false Nest run or washed ungraded eggs. 57.801 Section 57... Identification of Restricted Eggs Or Egg Products Not Intended for Human Consumption § 57.801 Nest run or washed ungraded eggs. Nest run or washed ungraded eggs are exempt from the labeling provisions in §...

  14. Piston and spring powered engine

    SciTech Connect

    Samodovitz, A. J.

    1985-12-10

    The invention is an improved piston engine, either two stroke or four stroke. In one, two stroke, one cylinder embodiment, the improvement comprises two springs connecting between the piston and the base of the piston. These springs are relatively relaxed when the crank is at top dead center. Then during the power/intake stroke, some of the fuel's energy is delivered to the crankshaft and some is used to compress the springs. The stored energy in the springs is delivered to the crankshaft during the exhaust/compression stroke while the springs return to their relatively relaxed condition. As a result, energy is delivered to the crankshaft during both strokes of the cycle, and the engine runs smooth. In one, four stroke, two cylinder embodiment, each cylinder has springs as described above, the cranks of each cylinder are aligned, and the cam sets one cylinder in the power stroke while the other is in the intake stroke. As a result, the engine runs smooth because energy is delivered to the crankshaft during all four strokes of the cycle, during two of the strokes by the burning fuel and during the other two by the release of energy in the springs. In both embodiments, a heavy crankshaft is not needed because of the more uniform power delivery.

  15. Geologic report on the Sand Wash Drilling Project, Moffat and Routt Counties, Colorado

    SciTech Connect

    Carter, T.E.; Wayland, T.E.

    1981-09-01

    The Sand Wash Basin Drilling Project comprises twenty-seven (27) drill holes located in Moffat and Routt Counties, northwest Colorado, having an aggregate depth of 26,107.5 feet (7957.6 m). The holes penetrate the Browns Park Formation of Miocene age, which is a tuffaceous continental sandstone deposited in fluvial, eolian, and lacustrine environments. Partly based on project drilling results, uranium potential resource estimates for this formation in the $50/lb U/sub 3/O/sub 8/ forward-cost category have been increased by 34,476 tons U/sub 3/O/sub 8/ (35,036 metric tons). Three areas between Maybell and Craig, Colorado, considered favorable for uranium occurrences were verified as favorable by project drilling, and a fourth favorable area northwest of Maybell has been expanded. In addition, project drilling results indicate two new favorable areas, one north and northwest and one south of Steamboat Springs, Colorado. Anomalous radioactivity was detected in drill holes in all six study areas of the project. The most important factor in concentrating significant amounts of uranium in the target formation appears to be the availability of gaseous or liquid hydrocarbons and/or hydrogen sulfide gas as reductants. Where subjacent formations supply these reductants to the Browns Park Formation, project drilling encountered 0.05 percent to 0.01 percent uranium concentrations. Potential, though unproven, sources of these reductants are believed to underlie parts of all six project study areas.

  16. Groundwater flow cycling between a submarine spring and an inland fresh water spring.

    PubMed

    Davis, J Hal; Verdi, Richard

    2014-01-01

    Spring Creek Springs and Wakulla Springs are large first magnitude springs that derive water from the Upper Floridan Aquifer. The submarine Spring Creek Springs are located in a marine estuary and Wakulla Springs are located 18 km inland. Wakulla Springs has had a consistent increase in flow from the 1930s to the present. This increase is probably due to the rising sea level, which puts additional pressure head on the submarine Spring Creek Springs, reducing its fresh water flow and increasing flows in Wakulla Springs. To improve understanding of the complex relations between these springs, flow and salinity data were collected from June 25, 2007 to June 30, 2010. The flow in Spring Creek Springs was most sensitive to rainfall and salt water intrusion, and the flow in Wakulla Springs was most sensitive to rainfall and the flow in Spring Creek Springs. Flows from the springs were found to be connected, and composed of three repeating phases in a karst spring flow cycle: Phase 1 occurred during low rainfall periods and was characterized by salt water backflow into the Spring Creek Springs caves. The higher density salt water blocked fresh water flow and resulted in a higher equivalent fresh water head in Spring Creek Springs than in Wakulla Springs. The blocked fresh water was diverted to Wakulla Springs, approximately doubling its flow. Phase 2 occurred when heavy rainfall resulted in temporarily high creek flows to nearby sinkholes that purged the salt water from the Spring Creek Springs caves. Phase 3 occurred after streams returned to base flow. The Spring Creek Springs caves retained a lower equivalent fresh water head than Wakulla Springs, causing them to flow large amounts of fresh water while Wakulla Springs flow was reduced by about half.

  17. Groundwater flow cycling between a submarine spring and an inland fresh water spring

    USGS Publications Warehouse

    Davis, J. Hal; Verdi, Richard

    2014-01-01

    Spring Creek Springs and Wakulla Springs are large first magnitude springs that derive water from the Upper Floridan Aquifer. The submarine Spring Creek Springs are located in a marine estuary and Wakulla Springs are located 18 km inland. Wakulla Springs has had a consistent increase in flow from the 1930s to the present. This increase is probably due to the rising sea level, which puts additional pressure head on the submarine Spring Creek Springs, reducing its fresh water flow and increasing flows in Wakulla Springs. To improve understanding of the complex relations between these springs, flow and salinity data were collected from June 25, 2007 to June 30, 2010. The flow in Spring Creek Springs was most sensitive to rainfall and salt water intrusion, and the flow in Wakulla Springs was most sensitive to rainfall and the flow in Spring Creek Springs. Flows from the springs were found to be connected, and composed of three repeating phases in a karst spring flow cycle: Phase 1 occurred during low rainfall periods and was characterized by salt water backflow into the Spring Creek Springs caves. The higher density salt water blocked fresh water flow and resulted in a higher equivalent fresh water head in Spring Creek Springs than in Wakulla Springs. The blocked fresh water was diverted to Wakulla Springs, approximately doubling its flow. Phase 2 occurred when heavy rainfall resulted in temporarily high creek flows to nearby sinkholes that purged the salt water from the Spring Creek Springs caves. Phase 3 occurred after streams returned to base flow. The Spring Creek Springs caves retained a lower equivalent fresh water head than Wakulla Springs, causing them to flow large amounts of fresh water while Wakulla Springs flow was reduced by about half.

  18. Characterization, Washing, Leaching, and Filtration of C-104 Sludge

    SciTech Connect

    KP Brooks; PR Bredt; GR Golcar; SA Hartley; LK Jagoda; KG Rappe; MW Urie

    2000-06-09

    Approximately 1,400 g of wet Hanford Tank C-104 Sludge was evaluated by Battelle for the high-level waste (HLW) pretreatment processes of ultrafiltration, dilute caustic washing, and elevated-temperature caustic leaching. The filterability of diluted C-104 sludge was measured with a 0.1-{micro}m sintered metal Mott filter using a 24-inch-long, single-element, crossflow filtration system (cells unit filter [CUF]). While the filtrate was being recirculated prior to washing and leaching, a 6.9 wt% solids slurry was evaluated with a matrix of seven 1-hour conditions of varying trans-membrane pressure (30 to 70 psid) and axial velocity (9 to 15 ft/s). The filtrate flux and backpulse efficiency were determined for each condition. The slurry was concentrated to 23 wt% solids, a second matrix of six 1-hour conditions was performed, and data analogous to that recorded in the first matrix were obtained. The low-solids-concentration matrix produced filtrate flux rates that ranged from 0.038 to 0.083 gpm/ft{sup 2}. The high-solids-concentration matrix produced filtrate flux rates that ranged from 0.0095 to 0.0172 gpm/ft{sup 2}. In both cases, the optimum filtrate flux was at the highest axial velocity (15 ft/s) and transmembrane pressure had little effect. Nearly all of the measured filtrate fluxes were more than an order of magnitude greater than the required plant flux for C-104 of 0.00126 gpm/ft{sup 2}. In both matrices, the filtrate flux appeared to be proportional to axial velocity, and the permeability appeared to be inversely proportional to the trans-membrane pressure. The first test condition was repeated as the last test condition for each matrix. In both cases, there was a significant decrease in filtrate flux, indicating some filter fouling during the test matrix that could not be removed by backpulsing alone, although the backpulse number and duration were not optimized. Following testing of these two matrices, the material was washed within the CUF by

  19. Principal facts for gravity stations in the vicinity of Coyote Spring Valley, Nevada, with initial gravity modeling results

    USGS Publications Warehouse

    Phelps, Geoffrey A.; Jewel, E.B.; Langenheim, V.E.; Jachens, R.C.

    2000-01-01

    Gravity measurements were made along 5 profiles across parts of the Coyote Spring Valley and vicinity in order to aid in modeling the depth and shapes of the underlying basins and to locate faults concealed beneath the basin fill. Measurements were taken at 200 m (660 ft) spacing along the profiles. Models based on these and existing regional data reveal two north-south-trending basins beneath Coyote Spring Valley that reach maximum depths of greater than 1 km (0.6 mi). A small valley, located just east of Coyote Spring Valley and containing Dead Man Wash, includes a small basin about 500 m (1600 ft) deep that appears to be the southern continuation of the northern basin beneath Coyote Spring Valley. The profile gravity data are further used to identify the locations of possible faults concealed beneath the basin fill.

  20. Fusulinid biostratigraphy of Bird Spring Formation in Spring Mountains near Mountain Springs Pass, Clark County, Nevada

    SciTech Connect

    Gamache, M.T.; Webster, G.D.

    1987-05-01

    Fusulinids from a 955.16 m thick section of Chesterian into Wolfcampian rocks of the Indian Springs and Bird Spring formations exposed near Mountain Springs Pass represent the biozones of Millerella to Pseudoschwagerina. Species of Millerella, Plectofusulina, Staffella, Schubertina, Pseudostaffella, Profusulinella, Fusulinella, Beedeina, Oketaella, Pseudofusulina, Triticites, Schwagerina, Eoparafusulina, and Cuniculinella were described. One new species of Millerella and three new species of Tricities were named. The Mountain Springs section can be correlated intraregionally with other sections in Clark County using similar cherty limestones or sandstone-dominated strata in association with biozones recognized in the southern Great Basin. The thickening of strata from the Mountain Springs section to the Arrow Canyon and Lee Canyon sections demonstrated by this method reflects each section's position to the northeast-trending Las Vegas-Wasatch hinge line between thin, shallow shelf sediments and thicker sediments to the west after palinspastic reconstruction. The large diversity of fusulinid species in the Mountain Springs section relative to Arrow Canyon and Lee Canyon suggests that a fusulinid diversity index may be useful in correlating similar paleoenvironments. Fusulinid biozones of the Mountain Springs section can also be correlated regionally with fusulinid subbiozones A through G of the Shasta Lake area in northern California and with fusulinid biozones of the Mid-Continent based on similar species and occurrences.

  1. Geophysical Studies Based on Gravity and Seismic Data of Tule Desert, Meadow Valley Wash, and California Wash Basins, Southern Nevada

    USGS Publications Warehouse

    Scheirer, Daniel S.; Page, William R.; Miller, John J.

    2006-01-01

    Gravity and seismic data from Tule Desert, Meadow Valley Wash, and California Wash, Nevada, provide insight into the subsurface geometry of these three basins that lie adjacent to rapidly developing areas of Clark County, Nevada. Each of the basins is the product of Tertiary extension accommodated with the general form of north-south oriented, asymmetrically-faulted half-grabens. Geophysical inversion of gravity observations indicates that Tule Desert and Meadow Valley Wash basins are segmented into subbasins by shallow, buried basement highs. In this study, basement refers to pre-Cenozoic bedrock units that underlie basins filled with Cenozoic sedimentary and volcanic units. In Tule Desert, a small, buried basement high inferred from gravity data appears to be a horst whose placement is consistent with seismic reflection and magnetotelluric observations. Meadow Valley Wash consists of three subbasins separated by basement highs at structural zones that accommodated different styles of extension of the adjacent subbasins, an interpretation consistent with geologic mapping of fault traces oblique to the predominant north-south fault orientation of Tertiary extension in this area. California Wash is a single structural basin. The three seismic reflection lines analyzed in this study image the sedimentary basin fill, and they allow identification of faults that offset basin deposits and underlying basement. The degree of faulting and folding of the basin-fill deposits increases with depth. Pre-Cenozoic units are observed in some of the seismic reflection lines, but their reflections are generally of poor quality or are absent. Factors that degrade seismic reflector quality in this area are rough land topography due to erosion, deformed sedimentary units at the land surface, rock layers that dip out of the plane of the seismic profile, and the presence of volcanic units that obscure underlying reflectors. Geophysical methods illustrate that basin geometry is more

  2. Late Cenozoic sedimentation and volcanism during transtensional deformation in Wingate Wash and the Owlshead Mountains, Death Valley

    USGS Publications Warehouse

    Luckow, H.G.; Pavlis, T.L.; Serpa, L.F.; Guest, B.; Wagner, D.L.; Snee, L.; Hensley, T.M.; Korjenkov, A.

    2005-01-01

    basement. The unconformity is locally overlain by channelized deposits of older Tertiary(?) red conglomerate, some of which predate the onset of extensive volcanism, but in most of the area is overlain by a moderately thick package of Middle Miocene trachybasalt, trachyandesitic, ash flows, lithic tuff, basaltic cinder, basanites, and dacitic pyroclastic, debris, and lahar flows with localized exposures of sedimentary rocks. The upper part of the Miocene stratigraphic sequence in this domain is comprised of coarse grained-clastic sediments that are apparently middle Miocene based on Ar/Ar dating of interbedded volcanic rocks. This sedimentary sequence, however, is lithologically indistinguishable from the structurally adjacent Late Miocene Lost Lake assemblage and a stratigraphically overlying Plio-Pleistocene alluvial fan; a relationship that handicaps tracing structures through this domain. This domain is also structurally complex and deformed by a series of northwest-southeast-striking, east-dipping, high-angle oblique, sinistral, normal faults that are cut by left-lateral strike-slip faults. The contact between the southern Panamint domain and the adjacent domains is a complex fault system that we interpret as a zone of Late Miocene distributed sinistral slip that is variably overprinted in different portions of the mapped area. The net sinistral slip across the Wingate Wash fault system is estimated at 7-9 km, based on offset of Proterozoic Crystal Springs Formation beneath the middle Miocene unconformity to as much as 15 km based on offset volcanic facies in Middle Miocene rocks. To the south of Wingate Wash, the northern Owlshead Mountains are also cut by a sinistral, northwest-dipping, oblique normal fault, (referred to as the Filtonny Fault) with significant slip that separates the Lower Wingate Wash and central Owlshead domains. The Filtonny Fault may represent a young conjugate fault to the dextral Southern Death Valley fault system and may be the northwest

  3. Physicochemical quality and chemical safety of chlorine as a reconditioning agent and wash water disinfectant for fresh-cut lettuce washing.

    PubMed

    Van Haute, Sam; Sampers, Imca; Holvoet, Kevin; Uyttendaele, Mieke

    2013-05-01

    Chlorine was assessed as a reconditioning agent and wash water disinfectant in the fresh-cut produce industry. Artificial fresh-cut lettuce wash water, made from butterhead lettuce, was used for the experiments. In the reconditioning experiments, chlorine was added to artificial wash water inoculated with Escherichia coli O157 (6 log CFU/ml). Regression models were constructed based on the inactivation data and validated in actual wash water from leafy vegetable processing companies. The model that incorporated chlorine dose and chemical oxygen demand (COD) of the wash water accurately predicted inactivation. Listeria monocytogenes was more resistant to chlorine reconditioning in artificial wash water than Salmonella spp. and Escherichia coli O157. During the washing process with inoculated lettuce (4 log CFU/g), in the absence of chlorine, there was a rapid microbial buildup in the water that accumulated to 5.4 ± 0.4 log CFU/100 ml after 1 h. When maintaining a residual concentration of 1 mg/liter free chlorine, wash water contamination was maintained below 2.7, 2.5, and 2.5 log CFU/100 ml for tap water and artificial process water with COD values of 500 and 1,000 mg O2/liter, respectively. A model was developed to predict water contamination during the dynamic washing process. Only minor amounts of total trihalomethanes were formed in the water during reconditioning. Total trihalomethanes accumulated to larger amounts in the water during the wash water disinfection experiments and reached 124.5 ± 13.4 μg/liter after 1 h of execution of the washing process in water with a COD of 1,000 mg O2/liter. However, no total trihalomethanes were found on the fresh-cut lettuce after rinsing.

  4. Physicochemical Quality and Chemical Safety of Chlorine as a Reconditioning Agent and Wash Water Disinfectant for Fresh-Cut Lettuce Washing

    PubMed Central

    Van Haute, Sam; Holvoet, Kevin; Uyttendaele, Mieke

    2013-01-01

    Chlorine was assessed as a reconditioning agent and wash water disinfectant in the fresh-cut produce industry. Artificial fresh-cut lettuce wash water, made from butterhead lettuce, was used for the experiments. In the reconditioning experiments, chlorine was added to artificial wash water inoculated with Escherichia coli O157 (6 log CFU/ml). Regression models were constructed based on the inactivation data and validated in actual wash water from leafy vegetable processing companies. The model that incorporated chlorine dose and chemical oxygen demand (COD) of the wash water accurately predicted inactivation. Listeria monocytogenes was more resistant to chlorine reconditioning in artificial wash water than Salmonella spp. and Escherichia coli O157. During the washing process with inoculated lettuce (4 log CFU/g), in the absence of chlorine, there was a rapid microbial buildup in the water that accumulated to 5.4 ± 0.4 log CFU/100 ml after 1 h. When maintaining a residual concentration of 1 mg/liter free chlorine, wash water contamination was maintained below 2.7, 2.5, and 2.5 log CFU/100 ml for tap water and artificial process water with COD values of 500 and 1,000 mg O2/liter, respectively. A model was developed to predict water contamination during the dynamic washing process. Only minor amounts of total trihalomethanes were formed in the water during reconditioning. Total trihalomethanes accumulated to larger amounts in the water during the wash water disinfection experiments and reached 124.5 ± 13.4 μg/liter after 1 h of execution of the washing process in water with a COD of 1,000 mg O2/liter. However, no total trihalomethanes were found on the fresh-cut lettuce after rinsing. PMID:23396332

  5. ‘If an Eye Is Washed Properly, It Means It Would See Clearly’: A Mixed Methods Study of Face Washing Knowledge, Attitudes, and Behaviors in Rural Ethiopia

    PubMed Central

    Aiemjoy, Kristen; Stoller, Nicole E.; Gebresillasie, Sintayehu; Shiferaw, Ayalew; Tadesse, Zerihun; Sewnet, Tegene; Ayele, Bezuayehu; Chanyalew, Melsew; Callahan, Kelly; Stewart, Aisha; Emerson, Paul M.; Lietman, Thomas M.; Keenan, Jeremy D.

    2016-01-01

    Background Face cleanliness is a core component of the SAFE (Surgery, Antibiotics, Facial cleanliness, and Environmental improvements) strategy for trachoma control. Understanding knowledge, attitudes, and behaviors related to face washing may be helpful for designing effective interventions for improving facial cleanliness. Methods In April 2014, a mixed methods study including focus groups and a quantitative cross-sectional study was conducted in the East Gojjam zone of the Amhara region of Ethiopia. Participants were asked about face washing practices, motivations for face washing, use of soap (which may reduce bacterial load), and fly control strategies. Results Overall, both knowledge and reported practice of face washing was high. Participants reported they knew that washing their own face and their children’s faces daily was important for hygiene and infection control. Although participants reported high knowledge of the importance of soap for face washing, quantitative data revealed strong variations by community in the use of soap for face washing, ranging from 4.4% to 82.2% of households reporting using soap for face washing. Cost and forgetfulness were cited as barriers to the use of soap for face washing. Keeping flies from landing on children was a commonly cited motivator for regular face washing, as was trachoma prevention. Conclusions Interventions aiming to improve facial cleanliness for trachoma prevention should focus on habit formation (to address forgetfulness) and address barriers to the use of soap, such as reducing cost. Interventions that focus solely on improving knowledge may not be effective for changing face-washing behaviors. PMID:27788186

  6. Spring Small Grains Area Estimation

    NASA Technical Reports Server (NTRS)

    Palmer, W. F.; Mohler, R. J.

    1986-01-01

    SSG3 automatically estimates acreage of spring small grains from Landsat data. Report describes development and testing of a computerized technique for using Landsat multispectral scanner (MSS) data to estimate acreage of spring small grains (wheat, barley, and oats). Application of technique to analysis of four years of data from United States and Canada yielded estimates of accuracy comparable to those obtained through procedures that rely on trained analysis.

  7. Can washing-pretreatment eliminate the health risk of municipal solid waste incineration fly ash reuse?

    PubMed

    Wang, Yao; Pan, Yun; Zhang, Lingen; Yue, Yang; Zhou, Jizhi; Xu, Yunfeng; Qian, Guangren

    2015-01-01

    Although the reuse of washing-pretreated MSWI fly ash bas been a hot topic, the associated risk is still an issue of great concern. The present study investigated the influence of washing-pretreatment on the total contents and bioaccessibility of heavy metals in MSWI fly ash. Furthermore, the study incorporated bioaccessibility adjustment into probabilistic risk assessment, to quantify the health risk from multi-pathway exposure to the concerned chemicals as a result of reusing washed MSWI fly ash. The results revealed that both water-washing and acid-washing process have resulted in the concentrated heavy metal content, and have reduced the bioaccessibility of heavy metals. Besides, the acid-washing process increased the cancer risk in most cases, while the effect of water-washing process was uncertain. However, both water-washing and acid-washing pretreatment could decrease the hazard index based on bioaccesilbility. Despite the uncertainties accompanying these procedures, the results indicated that, in this application scenario, only water-washing or acid-washing process cannot reduce the actual risk from all samples to acceptable level, especially for cancer risk.

  8. Factors influencing hand washing behaviour in primary schools: process evaluation within a randomized controlled trial.

    PubMed

    Chittleborough, Catherine R; Nicholson, Alexandra L; Basker, Elaine; Bell, Sarah; Campbell, Rona

    2012-12-01

    This article explores factors that may influence hand washing behaviour among pupils and staff in primary schools. A qualitative process evaluation within a cluster randomized controlled trial included pupil focus groups (n = 16, aged 6-11 years), semi-structured interviews (n = 16 teachers) and observations of hand washing facilities (n = 57). Pupils and staff in intervention and control schools demonstrated a similar level of understanding of how, when and why they should wash their hands. Lack of time, poor adult modelling of regular hand washing and unattractive facilities were seen as important barriers to regular hand washing. Reminders and explanations for the importance of hand hygiene were thought to have a positive impact. Influencing individual choices about hand washing through education and information may be necessary, but not sufficient, for initiating and maintaining good hand washing practices. Structural factors, including having time to wash hands using accessible, clean facilities, and being encouraged through the existence of hand washing opportunities in the daily routine and hand washing being viewed as the social norm, will also influence hand washing behaviour. The effectiveness of educational interventions at improving hand hygiene in primary schools may be improved by changing priorities of staff and increasing accessibility to quality facilities.

  9. Effect of different soil washing solutions on bioavailability of residual arsenic in soils and soil properties.

    PubMed

    Im, Jinwoo; Yang, Kyung; Jho, Eun Hea; Nam, Kyoungphile

    2015-11-01

    The effect of soil washing used for arsenic (As)-contaminated soil remediation on soil properties and bioavailability of residual As in soil is receiving increasing attention due to increasing interest in conserving soil qualities after remediation. This study investigates the effect of different washing solutions on bioavailability of residual As in soils and soil properties after soil washing. Regardless of washing solutions, the sequential extraction revealed that the residual As concentrations and the amount of readily labile As in soils were reduced after soil washing. However, the bioassay tests showed that the washed soils exhibited ecotoxicological effects - lower seed germination, shoot growth, and enzyme activities - and this could largely be attributed to the acidic pH and/or excessive nutrient contents of the washed soils depending on washing solutions. Overall, this study showed that treated soils having lower levels of contaminants could still exhibit toxic effects due to changes in soil properties, which highly depended on washing solutions. This study also emphasizes that data on the As concentrations, the soil properties, and the ecotoxicological effects are necessary to properly manage the washed soils for reuses. The results of this study can, thus, be utilized to select proper post-treatment techniques for the washed soils. PMID:26086811

  10. Factors influencing hand washing behaviour in primary schools: process evaluation within a randomized controlled trial.

    PubMed

    Chittleborough, Catherine R; Nicholson, Alexandra L; Basker, Elaine; Bell, Sarah; Campbell, Rona

    2012-12-01

    This article explores factors that may influence hand washing behaviour among pupils and staff in primary schools. A qualitative process evaluation within a cluster randomized controlled trial included pupil focus groups (n = 16, aged 6-11 years), semi-structured interviews (n = 16 teachers) and observations of hand washing facilities (n = 57). Pupils and staff in intervention and control schools demonstrated a similar level of understanding of how, when and why they should wash their hands. Lack of time, poor adult modelling of regular hand washing and unattractive facilities were seen as important barriers to regular hand washing. Reminders and explanations for the importance of hand hygiene were thought to have a positive impact. Influencing individual choices about hand washing through education and information may be necessary, but not sufficient, for initiating and maintaining good hand washing practices. Structural factors, including having time to wash hands using accessible, clean facilities, and being encouraged through the existence of hand washing opportunities in the daily routine and hand washing being viewed as the social norm, will also influence hand washing behaviour. The effectiveness of educational interventions at improving hand hygiene in primary schools may be improved by changing priorities of staff and increasing accessibility to quality facilities. PMID:22623617

  11. Occupational Hydrofluoric Acid Injury from Car and Truck Washing--Washington State, 2001-2013.

    PubMed

    Reeb-Whitaker, Carolyn K; Eckert, Carly M; Anderson, Naomi J; Bonauto, David K

    2015-08-21

    Exposure to hydrofluoric acid (HF) causes corrosive chemical burns and potentially fatal systemic toxicity. Car and truck wash cleaning products, rust removers, and aluminum brighteners often contain HF because it is efficient in breaking down roadway matter. The death of a truck wash worker from ingestion of an HF-based wash product and 48 occupational HF burn cases associated with car and truck washing in Washington State during 2001-2013 are summarized in this report. Among seven hospitalized workers, two required surgery, and all but one worker returned to the job. Among 48 injured workers, job titles were primarily auto detailer, car wash worker, truck wash worker, and truck driver. Because HF exposure can result in potentially severe health outcomes, efforts to identify less hazardous alternatives to HF-based industrial wash products are warranted.

  12. Occupational Hydrofluoric Acid Injury from Car and Truck Washing--Washington State, 2001-2013.

    PubMed

    Reeb-Whitaker, Carolyn K; Eckert, Carly M; Anderson, Naomi J; Bonauto, David K

    2015-08-21

    Exposure to hydrofluoric acid (HF) causes corrosive chemical burns and potentially fatal systemic toxicity. Car and truck wash cleaning products, rust removers, and aluminum brighteners often contain HF because it is efficient in breaking down roadway matter. The death of a truck wash worker from ingestion of an HF-based wash product and 48 occupational HF burn cases associated with car and truck washing in Washington State during 2001-2013 are summarized in this report. Among seven hospitalized workers, two required surgery, and all but one worker returned to the job. Among 48 injured workers, job titles were primarily auto detailer, car wash worker, truck wash worker, and truck driver. Because HF exposure can result in potentially severe health outcomes, efforts to identify less hazardous alternatives to HF-based industrial wash products are warranted. PMID:26292206

  13. Mineral resource potential map of the Vermilion Cliffs-Paria Canyon instant study area, Coconino County, Arizona, and Kane County, Utah

    USGS Publications Warehouse

    Bush, Alfred L.; Lane, Michael

    1982-01-01

    Water is perhaps the most significant resource needed in the study area. A number of perennial springs support the few local ranchers and tourist facilities. Some ground water would be available below the plateau, but drilling depths would be more than 2,000 ft (600-700 m).

  14. An Automatic Washing Machine to Remove Aluminum From Astronomical Mirrors

    NASA Astrophysics Data System (ADS)

    Zitelli, Valentina

    Cleaning of large astronomical mirrors, before aluminization, required in the past a large amount of manual operations on the surface. With very large mirrors, 8 meter or more, manual operations become time consuming, expensive and often dangerous, both for mirror surface and operators. A fully automated procedure is thus mandatory when handling large mirrors. To this aim we experimented on a small scale (60 cm) an automatic procedure, free from any manual contact with the mirror, capable of removing old aluminum and leaving a clean, wet surface ready for a successful new aluminization. First we manually treated small borosilicate mirrors, obtained from the LBT primary mirror glass batch, with different sequences of chemicals, commonly used to this purpose. These small mirrors were checked with a Wyko interferometer before and after treating, to trace change in roughness of the surface. Quality and stability of the new aluminum deposition after cleaning was also checked. The washing machine prototype is composed by a water proof box on rigid PVC with a moving arm, a pump and a series of tanks containing the used chemicals. All the adopted components can be used with acids and other corrosive fluids. The machine is designed to hold the mirror in vertical position. An arm with 10 cm spaced nozzles moves up and down in front of the mirror spraying the adopted chemicals in a defined sequence. A pump forces the liquid through the circuit. After the washing, the mirror is left, protected from the dust in the washing machine, for about 2 hours to drip the water, then is moved into the vacuum pump to check the final result of aluminizing the cleaned surface. A homogeneous layer of aluminum follows only after a careful cleaning, otherwise a fast oxidize process, or a inhomogeneous aluminum coating appear. Scaling times, fluxes and costs from this experiment to large size mirrors leads to realistic, affordable figures.

  15. Petrology of Aztec Wash pluton, Eldorado Mountains, southern Nevada

    SciTech Connect

    Falkner, C.M.; Miller, C.F. ); Wooden, J.L. )

    1993-04-01

    Aztec Wash pluton, a 50 km[sup 2] intrusive complex in the northern Eldorado Mountains, was emplaced ca. 16 Ma (Faulds et al., 1990) during extension within the Colorado River Corridor. The pluton displays extreme compositional variability, ranging from olivine gabbro (ca. 50 wt% SiO[sub 2]) to highly evolved aplite (76% SiO[sub 2]). Most of the intrusion is medium grained, homogeneous granite (ca. 72% SiO[sub 2]), but 1/3 is highly heterogeneous and dominated by mafic to intermediate rocks; a 6 [times] 3km, N-S mafic zone almost bisects the pluton. Well-displayed magma mingling and late mafic and felsic dikes verify the coexistence of mafic and felsic melts. Hornblende barometry indicates that the entire exposed portion of Aztec Wash pluton was emplaced at very shallow depth (Wash pluton: felsic magma intruded shallow levels of crust; the base of the magma chamber was intruded by basalt; after the upper portion of the initial magma was largely crystallized, basalt ascended into, perhaps remobilized, and mingled with felsic magma; this ascent may have been facilitated by E-W extension of the crystallizing pluton; more discrete syn- to post-pluton, mafic to felsic dikes mark additional intrusive pulses triggered by basalt intrusion and extensional fracturing. Field relations suggest that the mingling led to mixing in both the main units and the late dikes, but geochemical data indicate that mixing, if it occurred, was not a simple 2-end member process.

  16. Development of a preprototype hyperfiltration wash water recovery subsystem

    NASA Technical Reports Server (NTRS)

    1981-01-01

    The use of hyperfiltration as a mode of reclamation of waste water on board an extended mission spacecraft was investigated. Two basic approaches are considered with respect to hyperfiltration of wash water recovery. The initial approach involves the use of a hollow fiber permeator and a tubular module, operating at ambient temperature. In this system, relatively large doses of biocides are used to control microbial activity. Since biocides require a long contact time, and many have adverse dematological effects as well as many interact with membrane material, a second approach is considered which involves operating at pasturization temperature.

  17. Geomorphology of Upper Palm Wash, Anza Borrego Desert, California

    SciTech Connect

    Clarke, A.O.; Hansen, C.L.

    1988-05-01

    The Anza Borrego Desert has many geomorphic features to attract the attention of earth scientists. Deep, narrow stream channels, cut into Tertiary sedimentary rocks exposed west of the Salton Sea, have reaches that are almost devoid of alluvium and therefore are unprotected from the erosive work of running water. The usually dry, relatively small channels provide a microcosm in which to study desert landforms and processes associated with stream erosion and canyon formation. The processes and characteristics associated with these channels in Palm Wash are described in this article. 7 references.

  18. 49 CFR 230.111 - Spring rigging.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 49 Transportation 4 2012-10-01 2012-10-01 false Spring rigging. 230.111 Section 230.111... Tenders Trucks, Frames and Equalizing System § 230.111 Spring rigging. (a) Arrangement of springs and equalizers. Springs and equalizers shall be arranged to ensure the proper distribution of weight to...

  19. 49 CFR 236.822 - Switch, spring.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... Switch, spring. A switch equipped with a spring device which forces the points to their original position after being trailed through and holds them under spring compression. ... 49 Transportation 4 2014-10-01 2014-10-01 false Switch, spring. 236.822 Section...

  20. 49 CFR 236.822 - Switch, spring.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... Switch, spring. A switch equipped with a spring device which forces the points to their original position after being trailed through and holds them under spring compression. ... 49 Transportation 4 2010-10-01 2010-10-01 false Switch, spring. 236.822 Section...

  1. 49 CFR 236.822 - Switch, spring.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... Switch, spring. A switch equipped with a spring device which forces the points to their original position after being trailed through and holds them under spring compression. ... 49 Transportation 4 2011-10-01 2011-10-01 false Switch, spring. 236.822 Section...

  2. 49 CFR 236.822 - Switch, spring.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... Switch, spring. A switch equipped with a spring device which forces the points to their original position after being trailed through and holds them under spring compression. ... 49 Transportation 4 2013-10-01 2013-10-01 false Switch, spring. 236.822 Section...

  3. 49 CFR 236.822 - Switch, spring.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... Switch, spring. A switch equipped with a spring device which forces the points to their original position after being trailed through and holds them under spring compression. ... 49 Transportation 4 2012-10-01 2012-10-01 false Switch, spring. 236.822 Section...

  4. 49 CFR 229.65 - Spring rigging.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ..., except when that spring is part of a nest of three or more springs and none of the other springs in the nest has its top leaf or any other three leaves broken. An outer coil spring or saddle may not...

  5. 49 CFR 229.65 - Spring rigging.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ..., except when that spring is part of a nest of three or more springs and none of the other springs in the nest has its top leaf or any other three leaves broken. An outer coil spring or saddle may not...

  6. 49 CFR 229.65 - Spring rigging.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ..., except when that spring is part of a nest of three or more springs and none of the other springs in the nest has its top leaf or any other three leaves broken. An outer coil spring or saddle may not...

  7. 49 CFR 229.65 - Spring rigging.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ..., except when that spring is part of a nest of three or more springs and none of the other springs in the nest has its top leaf or any other three leaves broken. An outer coil spring or saddle may not...

  8. 49 CFR 229.65 - Spring rigging.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ..., except when that spring is part of a nest of three or more springs and none of the other springs in the nest has its top leaf or any other three leaves broken. An outer coil spring or saddle may not...

  9. Geohydrologic reconnaissance of Lake Mead National Recreation Area; Las Vegas Wash to Virgin River, Nevada

    USGS Publications Warehouse

    Laney, R.L.; Bales, J.T.

    1996-01-01

    This study is the last of a series of eight geohydrologic reconnaissance studies that were done in the Lake Mead National Recreation Area. The studies were done to evaluate the water resources in the recreation area and to identify areas having potential for the development of water supplies that would be adequate for marinas and campgrounds. The study area includes about 250 square miles north of Lake Mead from Las Vegas Wash to the Virgin River (Overton Arm), Nevada. Volcanic rocks, consolidated sedimentary rocks, and unconsolidated to semiconsolidated sedimentary rocks underlie the area. Surface-water sources include the Colorado River, Virgin River, Muddy River, and Las Vegas Wash. Elsewhere in the area, streamflow is meager and extremely variable. Ground water originates from four sources: (1) subsurface flow in local basins, (2) infiltration of water from Lake Mead into permeable rocks near the lake, (3) subsurface flow in valleys of perennial streams, and (4) subsurface flow in consolidated rocks of the Muddy Mountains. The quantity of water from Lake Mead that has saturated rocks adjacent to the lake probably is greater than the quantity of ground water from all the Other sources. Rocks saturated by water from the lake probably extend less than 0.5 mileinland from the lake shore. The quality of virtually all the ground water in the area is not acceptable for drinking purposes. The most favorable areas for obtaining ground water are those underlain by the coarse-grained deposits of the older alluvium and the younger alluvium adjacent to Lake Mead. The least favorable areas are those underlain by the mudstone facies of the Muddy Creek Formation and fine-grained rocks of the Horse Spring Formation. Four areas identified as having potential for ground-water development are (1) near Overton Beach, (2) west of Callville Bay, (3) near Middle Point, and (4) in the lower Moapa Valley. Usable quantities of water probably can be obtained at these sites, but the

  10. Physical separations soil washing system cold test results

    SciTech Connect

    McGuire, J.P.

    1993-07-28

    This test summary describes the objectives, methodology, and results of a physical separations soil-washing system setup and shakedown test using uncontaminated soil. The test is being conducted in preparation for a treatability test to be conducted in the North Pond of the 300-FF-1 Operable Unit. It will be used to assess the feasibility of using a physical separations process to reduce the volume of contaminated soils in the 300-FF-1 Operable Unit. The test is described in DOE-RL (1993). The setup test was conducted at an uncontrolled area located approximately 3.2 km northwest of the 300-FF-1 Operable Unit. The material processed was free of contamination. The physical separation equipment to be used in the test was transferred to the US Department of Energy (DOE) by the US Environmental Protection Agency (EPA) Risk Reduction Engineering Laboratory. On May 13, 1993, soil-washing equipment was moved to the cold test location. Design assistance and recommendation for operation was provided by the EPA.

  11. Ultrasonic coal washing to leach alkali elements from coals.

    PubMed

    Balakrishnan, S; Reddy, V Midhun; Nagarajan, R

    2015-11-01

    Deposition of fly ash particles onto heat-transfer surfaces is often one of the reasons for unscheduled shut-downs of coal-fired boilers. Fouling deposits encountered in convective sections of a boiler are characterized by arrival of ash particles in solidified (solid) state. Fouling is most frequently caused by condensation and chemical reaction of alkali vapors with the deposited ash particles creating a wet surface conducive to collect impacting ash particles. Hence, the amount of alkali elements present in coals, which, in turn, is available in the flue gas as condensable vapors, determines the formation and growth of fouling deposits. In this context, removal of alkali elements becomes vital when inferior coals having high-ash content are utilized for power generation. With the concept of reducing alkali elements present in a coal entering the combustor, whereby the fouling deposits can either be minimized or be weakened due to absence of alkali gluing effect, the ultrasonic leaching of alkali elements from coals is investigated in this study. Ultrasonic water-washing and chemical-washing, in comparison with agitation, are studied in order to estimate the intensification of the alkali removal process by sonication. PMID:26186840

  12. Final wash precipitate feed simulants for DWPF Cold Chemical Runs

    SciTech Connect

    Marek, J.C.

    1992-05-15

    The Defense Waste Processing Facility (DWPF) is scheduled to start non-radioactive process operation in September, 1992. The Cold Chemical Runs will demonstrate acceptable process operation and provide data required to satisfy the Waste Compliance Plan. Five basic sludge simulants will be required for these tests. Two basic precipitate simulants will be needed to operate the Salt Processing Cell with and without mercury in the precipitate feed. Precipitate feed simulant specifications for DWPF Cold Chemical Runs are revised in this report. All previous specifications of precipitate feed simulants for DWPF Cold Chemical Runs (CCRs) are superceded by this document. The revision is needed to (1) eliminate use of hydroxylamine nitrate (HAN) in the precipitate process operation, (2) simulate the projected composition of the precipitate feed to DWPF produced by final washing to reduce the nitrite concentration to {le} 0.01M without washing the simulated feed, (3) delete organic trim chemical additions to the precipitate feed and (4) specify an additive to prevent foaming of the precipitate. Two specifications are provided to operate the Salt Processing Cell with mercury (Tests 5&6) and without mercury (Tests 1--4) in the precipitate feed.

  13. Final wash precipitate feed simulants for DWPF Cold Chemical Runs

    SciTech Connect

    Marek, J.C.

    1992-05-15

    The Defense Waste Processing Facility (DWPF) is scheduled to start non-radioactive process operation in September, 1992. The Cold Chemical Runs will demonstrate acceptable process operation and provide data required to satisfy the Waste Compliance Plan. Five basic sludge simulants will be required for these tests. Two basic precipitate simulants will be needed to operate the Salt Processing Cell with and without mercury in the precipitate feed. Precipitate feed simulant specifications for DWPF Cold Chemical Runs are revised in this report. All previous specifications of precipitate feed simulants for DWPF Cold Chemical Runs (CCRs) are superceded by this document. The revision is needed to (1) eliminate use of hydroxylamine nitrate (HAN) in the precipitate process operation, (2) simulate the projected composition of the precipitate feed to DWPF produced by final washing to reduce the nitrite concentration to [le] 0.01M without washing the simulated feed, (3) delete organic trim chemical additions to the precipitate feed and (4) specify an additive to prevent foaming of the precipitate. Two specifications are provided to operate the Salt Processing Cell with mercury (Tests 5 6) and without mercury (Tests 1--4) in the precipitate feed.

  14. Accuracy of Different Putty-Wash Impression Techniques with Various Spacer Thickness

    PubMed Central

    Arora, Aman; Singh, Vijay Pratap

    2012-01-01

    ABSTRACT One of the most important steps is accurate impression making for fabrication of fixed partial denture. The two different putty-wash techniques that are commonly used are: (1) Putty-wash one-step technique, (2) putty-wash two-step technique. A uniform wash space is needed for an accurate impression. Nissan et al recommended the use of two-step technique for accurate impression making as there is uniform wash space for the light body material to polymerize. The aim of the present study was to compare the accuracy of stone casts obtained from different putty-wash impression techniques using various spacer thickness. The critical factor that influences the accuracy of putty-wash impression techniques is the controlled wash bulk which is absent in one-step putty-wash impression technique and with polyethylene spacer was used. How to cite this article: Chugh A, Arora A, Singh VP. Accuracy of Different Putty-Wash Impression Techniques with Various Spacer Thickness. Int J Clin Pediatr Dent 2012;5(1):33-38. PMID:25206132

  15. Faecal indicator bacteria on the hands and the effectiveness of hand-washing in Zimbabwe.

    PubMed

    Kaltenthaler, E; Waterman, R; Cross, P

    1991-10-01

    Two aspects of hand-washing were explored in this study. Mothers and children from 80 families in Zimbabwe were asked to wash their hands in the traditional manner in sterile water. Mothers were asked to answere a socio-economic questionnaire. By using the questionnaire and observations in conjunction with the microbiological data from hand-washing, factors were identified which contributed to high counts on the hands. These were: high relative humidity, living on a commercial farm, and having an infant in the family. Mothers and children 1-5 years of age had higher counts than children of 6-12 years. People recently involved in outdoor physical activities such as farming had higher counts than those involved in other activities. The traditional hand-washing method was also compared with two other hand-washing methods: hand-washing using soap and hand-washing using a container known as the mukombe. Hand-washing with soap was the most effective method closely followed by hand-washing using the mukombe. The least effective method was traditional hand-washing.

  16. Accuracy of different putty-wash impression techniques with various spacer thickness.

    PubMed

    Chugh, Anshul; Arora, Aman; Singh, Vijay Pratap

    2012-01-01

    One of the most important steps is accurate impression making for fabrication of fixed partial denture. The two different putty-wash techniques that are commonly used are: (1) Putty-wash one-step technique, (2) putty-wash two-step technique. A uniform wash space is needed for an accurate impression. Nissan et al recommended the use of two-step technique for accurate impression making as there is uniform wash space for the light body material to polymerize. The aim of the present study was to compare the accuracy of stone casts obtained from different putty-wash impression techniques using various spacer thickness. The critical factor that influences the accuracy of putty-wash impression techniques is the controlled wash bulk which is absent in one-step putty-wash impression technique and with polyethylene spacer was used. How to cite this article: Chugh A, Arora A, Singh VP. Accuracy of Different Putty-Wash Impression Techniques with Various Spacer Thickness. Int J Clin Pediatr Dent 2012;5(1):33-38.

  17. Validation of acid washes as critical control points in hazard analysis and critical control point systems.

    PubMed

    Dormedy, E S; Brashears, M M; Cutter, C N; Burson, D E

    2000-12-01

    A 2% lactic acid wash used in a large meat-processing facility was validated as an effective critical control point (CCP) in a hazard analysis and critical control point (HACCP) plan. We examined the microbial profiles of beef carcasses before the acid wash, beef carcasses immediately after the acid wash, beef carcasses 24 h after the acid wash, beef subprimal cuts from the acid-washed carcasses, and on ground beef made from acid-washed carcasses. Total mesophilic, psychrotrophic, coliforms, generic Escherichia coli, lactic acid bacteria, pseudomonads, and acid-tolerant microorganisms were enumerated on all samples. The presence of Salmonella spp. was also determined. Acid washing significantly reduced all counts except for pseudomonads that were present at very low numbers before acid washing. All other counts continued to stay significantly lower (P < 0.05) than those on pre-acid-washed carcasses throughout all processing steps. Total bacteria, coliforms, and generic E. coli enumerated on ground beef samples were more than 1 log cycle lower than those reported in the U.S. Department of Agriculture Baseline data. This study suggests that acid washes may be effective CCPs in HACCP plans and can significantly reduce the total number of microorganisms present on the carcass and during further processing. PMID:11131890

  18. WASH has a critical role in NK cell cytotoxicity through Lck-mediated phosphorylation

    PubMed Central

    Huang, L; Zhu, P; Xia, P; Fan, Z

    2016-01-01

    Natural killer (NK) cells are important effector cells of the innate immune system to kill certain virus-infected and transformed cells. Wiskott–Aldrich Syndrome protein (WASP) and SCAR homolog (WASH) has been identified as a member of WASP family proteins implicated in regulating the cytoskeletal reorganization, yet little is known about its function in lymphocytes. Here we demonstrate that WASH is crucial for NK cell cytotoxicity. WASH was found to colocalize with lytic granules upon NK cell activation. Knockdown of WASH expression substantially inhibited polarization and release of lytic granules to the immune synapse, resulting in the impairment of NK cell cytotoxicity. More importantly, our data also define a previously unappreciated mechanism for WASH function, in which Src family kinase Lck can interact with WASH and induce WASH phosphorylation. Mutation of tyrosine residue Y141, identified here as the major site of WASH phosphorylation, partially blocked WASH tyrosine phosphorylation and NK cell cytotoxicity. Taken together, these observations suggest that WASH has a pivotal role for regulation of NK cell cytotoxicity through Lck-mediated Y141 tyrosine phosphorylation. PMID:27441653

  19. Fossilization Processes in Thermal Springs

    NASA Technical Reports Server (NTRS)

    Farmer, Jack D.; Cady, Sherry; Desmarais, David J.; Chang, Sherwood (Technical Monitor)

    1995-01-01

    To create a comparative framework for the study of ancient examples, we have been carrying out parallel studies of the microbial biosedimentology, taphonomy and geochemistry of modem and sub-Recent thermal spring deposits. One goal of the research is the development of integrated litho- and taphofacies models for siliceous and travertline sinters. Thermal springs are regarded as important environments for the origin and early evolution of life on Earth, and we seek to utilize information from the fossil record to reconstruct the evolution of high temperature ecosystems. Microbial contributions to the fabric of thermal spring sinters occur when population growth rates keep pace with, or exceed rates of inorganic precipitation, allowing for the development of continuous biofilms or mats. In siliceous thermal springs, microorganisms are typically entombed while viable. Modes of preservation reflect the balance between rates of organic matter degradation, silica precipitation and secondary infilling. Subaerial sinters are initially quite porous and permeable and at temperatures higher than about 20 C, organic materials are usually degraded prior to secondary infilling of sinter frameworks. Thus, organically-preserved microfossils are rare and fossil information consists of characteristic biofabrics formed by the encrustation and underplating of microbial mat surfaces. This probably accounts for the typically low total organic carbon values observed in thermal spring deposits. In mid-temperature, (approx. 35 - 59 C) ponds and outflows, the surface morphology of tufted Phormidium mats is preserved through mat underplating by thin siliceous: crusts. Microbial taxes lead to clumping of ceils and/or preferred filament orientations that together define higher order composite fabrics in thermal spring stromatolites (e.g. network, coniform, and palisade). At lower temperatures (less than 35 C), Calothrix mats cover shallow terracette pools forming flat carpets or pustular

  20. Removal, redistribution, and potential risks of soil Cd, Pb, and Zn after washing with various extractants.

    PubMed

    Chen, Chunle; Chen, Yanhui; Xie, Tuanhui; Wang, Ming Kuang; Wang, Guo

    2015-11-01

    The effectiveness of four different washing extractants--HCl, FeCl3, citric acid, and EDTA--in removing Cd, Pb, and Zn from polluted soil was studied. The removal of these metals, their redistribution between fractions, and the potential risks posed by them, in soils washed with the tested extractants, were examined. Although all the rounds of washing removed Cd, Pb, and Zn from soil, the first round removed more metals than subsequent rounds. Each of the four extractants had different effects on the removal of the metals. At the end of the first round of washing, HCl, EDTA, and FeCl3 were the most effective in removing Zn, Pb, and Cd, respectively. Both the single round and five successive rounds of washing with various extractants resulted in significant increases in Pb in the exchangeable/acid extractable fraction. Washing with HCl, EDTA, and FeCl3 significantly reduced potential risks (calculated as the Potential Risk Index, PRI) posed by Cd in washed soil. The first round of washing, using all extractants, increased the risks posed by Pb and Zn. However, five successive rounds of washing with FeCl3 and EDTA reduced the risk posed by Pb, and washing with citric acid and FeCl3 increased the risks posed by Zn. EDTA and HCl were better for reducing Zn risks, and successive washing with EDTA and FeCl3 were more effective in reducing Pb risks than the other extractants. Finally, five successive rounds of washing, with all the extractants, effectively reduced the potential risks posed by Cd. Among the four reagents, EDTA was advised to be the alternative of the washing reagent by significantly reducing the PRI values of Cd, Pb, and Zn.

  1. The Dependence of the Spring Constant in the Linear Range on Spring Parameters

    ERIC Educational Resources Information Center

    Khotimah, Siti Nurul; Viridi, Sparisoma; Widayani; Khairurrijal

    2011-01-01

    In basic physics laboratories, springs are normally used to determine both spring constants and the Earth's gravitational acceleration. Students generally do not notice that the spring constant is not a universal constant, but depends on the spring parameters. This paper shows and verifies that the spring constant in the linear range is inversely…

  2. Wash durability and optimal drying regimen of four brands of long-lasting insecticide-treated nets after repeated washing under tropical conditions

    PubMed Central

    2010-01-01

    Background The current study was undertaken to determine the optimal wash-drying regimen and the effects of different washing procedures on the efficacy, and durability of four brands of newly introduced long-lasting insecticide-treated nets (LLINs) under tropical conditions. Methods In the current study, the following four LLINs were tested: Olyset®, PermaNet ®2.0, BASF® and TNT®. Nets were divided into three sets; one set was washed by hand rubbing and air-dried either hanging or spread on the ground in direct sunlight or hanging or spread on the ground under the shade. A second set was washed using the WHO protocol (machine) and the third set was washed by beating the nets on rocks. The biological activities of the nets were assessed by a three-minute bioassay cone test and the residual insecticide contents were determined using high performance liquid chromatography (HPLC) procedure. Results Nets that were dried hanging under the shade retained more insecticide, 62.5% and recorded higher mortality compared to nets which were dried lying on the ground in direct sunlight 58.8%, nets dried under the shade spread on the ground 56.3%, and 57.8% for nets dried hanging in direct sunlight. It was also observed that nets washed by the standard WHO protocol, retained more insecticide and were more effective in killing mosquitoes compared to nets washed by local methods of hand rubbing and beating on rocks. There were significant differences between drying regimens (p < 0.0001) and between washing procedures (p < 0.001) respectively. However, the effect of net type was statistically insignificant. The statistical differences on individual nets were also compared, for PermaNet® and TNT there were no significant differences observed between the four drying regimens (p = 0.7944 and 0.4703) respectively). For BASF and Olyset, the differences were significant (p < 0.001 and p > 0.0001). Conclusion The results of this study suggest that washing and drying regimen influence

  3. Regulation of an Actin Spring

    NASA Astrophysics Data System (ADS)

    Tam, Barney; Shin, Jennifer; Brau, Ricardo; Lang, Matthew; Mahadevan, L.; Matsudaira, Paul

    2006-03-01

    To produce motion, cells rely on the conversion of potential energy into mechanical work. One such example is the dramatic process involving the acrosome reaction of Limulus sperm, whereby a 60 μm-long bundle of actin filaments straightens from a coiled conformation to extend out of the cell in five seconds. This cellular engine and the motion it produces represent a third type of actin-based motility fundamentally different from polymerization or myosin-driven processes. The motive force for this extension originates from stored elastic energy in the overtwisted, pre-formed coil---much like a compressed mechanical spring. When the actin bundle untwists, this energy is converted to mechanical work powering the extension. We report on experiments probing the regulation of this actin spring by extracellular calcium. We find that extracellular calcium needs to be present for the spring to activate, and that calcium regulates the velocity of the extension.

  4. Bouncing dynamics of a spring

    NASA Astrophysics Data System (ADS)

    Hubert, M.; Ludewig, F.; Dorbolo, S.; Vandewalle, N.

    2014-04-01

    We consider the dynamics of a deformable object bouncing on an oscillating plate and we propose to model its deformations. For this purpose, we use a spring linked to a damper. Elastic properties and viscous effects are taken into account. From the bouncing spring equations of motion, we emphasize the relevant parameters of the dynamics. We discuss the range of parameters in which elastic deformations do not influence the bouncing dynamics of this object and compare this behavior with the bouncing ball dynamics. By calculating the spring bouncing threshold, we evidence the effect of resonance and prove that elastic properties can make the bounce easier. This effect is for example encountered in the case of bouncing droplets. We also consider bifurcation diagrams in order to describe the consequences of a dependence on the frequency. Finally, hysteresis in the dynamics is presented.

  5. Changes in soil toxicity by phosphate-aided soil washing: effect of soil characteristics, chemical forms of arsenic, and cations in washing solutions.

    PubMed

    Jho, Eun Hea; Im, Jinwoo; Yang, Kyung; Kim, Young-Jin; Nam, Kyoungphile

    2015-01-01

    This study was set to investigate the changes in the toxicity of arsenic (As)-contaminated soils after washing with phosphate solutions. The soil samples collected from two locations (A: rice paddy and B: forest land) of a former smelter site were contaminated with a similar level of As. Soil washing (0.5 M phosphate solution for 2 h) removed 24.5% As, on average, in soil from both locations. Regardless of soil washing, Location A soil toxicities, determined using Microtox, were greater than that of Location B and this could be largely attributed to different soil particle size distribution. With soils from both locations, the changes in As chemical forms resulted in either similar or greater toxicities after washing. This emphasizes the importance of considering ecotoxicological aspects, which are likely to differ depending on soil particle size distribution and changes in As chemical forms, in addition to the total concentration based remedial goals, in producing ecotoxicologically-sound soils for reuse. In addition, calcium phosphate used as the washing solution seemed to contribute more on the toxic effects of the washed soils than potassium phosphate and ammonium phosphate. Therefore, it would be more appropriate to use potassium or ammonium phosphate than calcium phosphate for phosphate-aided soil washing of the As-contaminated soils. PMID:25482580

  6. Study of phase transformation and microstructure of alcohol washed titania nanoparticles for thermal stability

    NASA Astrophysics Data System (ADS)

    Kaur, Manpreet; Singh, Gaganjot; Bimbraw, Keshav; Uniyal, Poonam

    2015-08-01

    Nanostructured titania have been successfully synthesized by hydrolysis of alkoxide at calcination temperatures 500 °C, 600 °C and 700 °C. As the calcination temperature increases, alcohol washed samples show lesser rutile content as compared to water washed samples. Morphology and Particle sizes was determined by field emission scanning electron microscopy (FESEM), while thermogravimetric-differential scanning calorimetry (TG-DSC) was used to determine thermal stability. Alcohol washed samples undergo 30% weight loss whereas 16% in water washed samples was observed. The mean particle sizes were found to be increase from 37 nm to 100.9 nm and 35.3 nm to 55.2 nm for water and alcohol washed samples respectively. Hydrolysis of alkoxide was shown to be an effective means to prepare thermally stable titania by using alcohol washed samples as a precursor.

  7. Study of phase transformation and microstructure of alcohol washed titania nanoparticles for thermal stability

    SciTech Connect

    Kaur, Manpreet Singh, Gaganjot; Bimbraw, Keshav; Uniyal, Poonam

    2015-08-28

    Nanostructured titania have been successfully synthesized by hydrolysis of alkoxide at calcination temperatures 500 °C, 600 °C and 700 °C. As the calcination temperature increases, alcohol washed samples show lesser rutile content as compared to water washed samples. Morphology and Particle sizes was determined by field emission scanning electron microscopy (FESEM), while thermogravimetric-differential scanning calorimetry (TG-DSC) was used to determine thermal stability. Alcohol washed samples undergo 30% weight loss whereas 16% in water washed samples was observed. The mean particle sizes were found to be increase from 37 nm to 100.9 nm and 35.3 nm to 55.2 nm for water and alcohol washed samples respectively. Hydrolysis of alkoxide was shown to be an effective means to prepare thermally stable titania by using alcohol washed samples as a precursor.

  8. Environmental assessment of the proposed nonelectric application of geothermal resources at Desert Hot Springs, California

    NASA Technical Reports Server (NTRS)

    Rosenberg, L.

    1978-01-01

    The paper presents an environmental analysis performed in evaluating various proposed geothermal demonstration projects at Desert Hot Springs. These are categorized in two ways: (1) indirect, or (2) direct uses. Among the former are greenhouses, industrial complexes, and car washes. The latter include aquaculture, a cascaded agribusiness system, and a mobile home park. Major categories of environmental impact covered are: (1) site, (2) construction of projects, and (3) the use of the geothermal source. Attention is also given to the disposal of the geothermal fluid after use. Finally, it is concluded that there are no major problems forseen for each project, and future objectives are discussed.

  9. Gravity and magnetic data across the Ghost Dance Fault in WT-2 Wash, Yucca Mountain, Nevada

    SciTech Connect

    Oliver, H.W.; Sikora, R.F.

    1994-12-31

    Detailed gravity and ground magnetic data were obtained in September 1993 along a 4,650 ft-long profile across the Ghost Dance Fault system in WT-2 Wash. Gravity stations were established every 150 feet along the profile. Total-field magnetic measurements made initially every 50 ft along the profile, then remade every 20 ft through the fault zone. These new data are part of a geologic and geophysical study of the Ghost Dance Fault (GDF) which includes detailed geologic mapping, seismic reflection, and some drilling including geologic and geophysical logging. The Ghost Dance Fault is the only through-going fault that has been identified within the potential repository for high-level radioactive waste at Yucca Mountain, Nevada. Preliminary gravity results show a distinct decrease of 0.1 to 0.2 mGal over a 600-ft-wide zone to the east of and including the mapped fault. The gravity decrease probably marks a zone of brecciation. Another fault-offset located about 2,000 ft to the east of the GDF was detected by seismic reflection data and is also marked by a distinct gravity low. The ground magnetic data show a 200-ft-wide magnetic low of about 400 nT centered about 100 ft east of the Ghost Dance Fault. The magnetic low probably marks a zone of brecciation within the normally polarized Topopah Spring Tuff, the top of which is about 170 ft below the surface, and which is known from drilling to extend to a depth of about 1,700 ft. Three-component magnetometer logging in drill hole WT-2 located about 2,700 ft east of the Ghost Dance Fault shows that the Topopah Spring Tuff is strongly polarized magnetically in this area, so that fault brecciation of a vertical zone within the Tuff could provide an average negative magnetic contrast of the 4 Am{sup {minus}1} needed to produce the 400 nT low observed at the surface.

  10. The Effects of Chemical Wash Additives on the Corrosion of Aerospace Alloys in Marine Environments

    NASA Technical Reports Server (NTRS)

    MacDowell, Louis; Calle, Luz Marina; Curran, Joseph; Hodge, Tim; Barile, Ronald; Heidersbach, Robert; Steinrock, T. (Technical Monitor)

    2002-01-01

    This paper presents the methodology for comparing the relative effectiveness of four chemical products used for rinsing airplanes and helicopters. The products were applied on a weekly basis to a series of flat alloy panels exposed to an oceanfront marine environment for one year. The results are presented along with comparisons of exposures of the same alloys that were not washed, were washed with seawater, or washed with de-ionized water.

  11. Live-line insulator washing: Experimental investigation to assess safety and efficiency requirements

    SciTech Connect

    Perin, D.; Pigini, A.; Visintainer, I.; Ramamoorty, C.M.

    1995-01-01

    A laboratory investigation was carried out to study live-line washing of insulators, with special attention to the two washing procedures which adopt hand-held jet nozzles and helicopter mounted nozzles. The aspects related to safety and those related to efficiency and reliability were considered. On the basis of the results, site working distances and indications to define optimal washing procedures were derived.

  12. Superstorm Sandy marine debris wash-ups on Long Island - What happened to them?

    PubMed

    Swanson, R Lawrence; Lwiza, Kamazima; Willig, Kaitlin; Morris, Kaitlin

    2016-07-15

    Superstorm Sandy generated huge quantities of debris in the Long Island, NY coastal zone. However, little appears to have been washed offshore to eventually be returned to Long Island's beaches as marine debris wash-ups. Information for our analysis includes debris collection statistics, very high resolution satellite images, along with wind and sea level data. Rigorous debris collection efforts along with meteorological conditions following the storm appear to have reduced the likelihood of debris wash-ups. PMID:27158045

  13. Genetic stratigraphy of the Williams Fork Formation, Sand Wash Basin, Colorado and Wyoming

    SciTech Connect

    Hamilton, D.S. )

    1993-08-01

    The Williams Fork Formation forms the upper part of the Upper Cretaceous Mesaverde Group, Sand Wash basin. The formation can be divided into four genetic depositional sequences each bounded by regionally extensive, low-resistivity shale markers. The markers are continuous across the basin, extending from the southeastern margin to the southern Flank of the Rock Springs uplift. Recognizing these bounding surfaces was relatively straightforward in the eastern half of the basin, where they are interpreted to be maximum marine-flooding surfaces. Recognizing them in the continental facies to the northwest, however, was more difficult, but still achievable with detailed well-log correlation. Presence of the markers to the northwest indicates that either the marine flooding extended farther west than is generally recognized, or that the controls on the flooding (such as shutting off sediment supply) leave a record in the non-marine environment as surfaces of sediment starvation or non-deposition. The four genetic depositional sequences represent progradational clastic wedges of variable areal extend that were deposited during discrete episodes of basin filling. Geometry of the framework sandstones and log-facies character of each of the genetic units indicate a similar depositional style for genetic units 1-3. These units are characterized by upward-coarsening, sandstone-rich linear shoreline systems in the southeast that are bounded updip by aggradational coals and interbedded mudrocks of the coastal plain that, in turn, pass landward into aggradational log motifs of thick, stacked sandstone units and interbedded mudstones on the alluvial plain. Unit 4 is characterized throughout by mudstone-rich coal-bearing facies interpreted as alluvial-plain deposits with lacustrine influence.

  14. 1. Photocopy of undated wash drawing. The largest building is ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    1. Photocopy of undated wash drawing. The largest building is the Hotel Williams. Next to it is the Williams House (Williams Hotel Annex), HABS No. MI-258 A. Below them are the log cabins built by the American Fur Company (from left to right): Log Building No. 1 (MI-258 C), Log Building No. 2 (MI-258 D), Log Building No. 3 (not documented), Log Building No. 4 (MI-258 E), and Log Building No. 5 (MI-258 F). (Williams Log House, MI-258 B, and Log Building No. 8, MI-258 G, are not shown). The drawing is in the collection of the Michigan Historical Commission. Although it does not have a date, it was painted in the early 20th century after the main building was constructed. - Hotel Williams, Murray Bay, Munising, Alger County, MI

  15. Wash water reclamation technology for advanced manned spacecraft

    NASA Technical Reports Server (NTRS)

    Putnam, D. F.

    1977-01-01

    The results of an analytical study and assessment of state-of-the-art wash water reclamation technology for advanced manned spacecraft is presented. All non-phase-change unit operations, unit processes, and subsystems currently under development by NASA are considered. Included among these are: filtration, ultrafiltration, carbon adsorption, ion exchange, chemical pretreatment, reverse osmosis, hyperfiltration, and certain urea removal techniques. Performance data are given together with the projected weights and sizes of key components and subsystems. In the final assessment, a simple multifiltration approach consisting of surface-type cartridge filters, carbon adsorption and ion exchange resins receives the highest rating for six-man orbital missions of up to 10 years in duration.

  16. [Biosynthesis of enniatin by washed cells of Fusarium sambucinum].

    PubMed

    Minasian, A E; Chermenskĭ, D N; Bezborodov, A M

    1979-01-01

    Biosynthesis of the depsipeptide membrane ionophore--enniatin B by the washed mycelium Fusarium sambucinum Fuck 52 377 was studied. Metabolic precursors of enniatin B, alpha-ketovaleric acid, 14C-L-valine, and 14CH3-methionine, were added to the system after starvation. The amino acid content in the metabolic pool increased 1.5 times after addition of alpha-ketovaleric acid, 2.2 times after that of valine, and 2.5 times after addition of methionine. 14C-L-valine and 14CH3-methionine were incorporated into the molecule of enniatin B. Valine methylation in the molecule occurred at the level of synthesized depsipeptide. Amino acids of the metabolic pool performed the regulatory function in the synthesis. PMID:583180

  17. Tests of disinfection by heat in a bedpan washing machine.

    PubMed

    Ayliffe, G A; Collins, B J; Deverill, C E

    1974-09-01

    Tests of effectiveness of disinfection of metal and polypropylene bedpans were made in a washer fitted with a steam generator. Broth cultures of Escherichia coli, Pseudomonas aeruginosa, Staphylococcus aureus, or Streptococcus faecalis (approximately 4 x 10(8) organisms) were sealed in lengths of capillary tubing and attached to the surface of the pans. In other tests, pans were contaminated with an artificial soil containing Str. faecalis (10(8) organisms/ml). In both series of tests, counts of surviving organisms were made at the end of the washing and disinfection cycle. The tests using capillary tubes showed that the Gram-negative bacilli were effectively killed, but not necessarily Gram-positive cocci. However, when incorporated in standard soil, Str. faecalis was killed or removed during the cycle. The results indicate that the disinfection process was effective for metal bedpans, but less so for polypropylene. Possible disadvantages and modification of the machine are suggested. PMID:4214841

  18. Washing of cut persimmon with thyme or lemon essential oils.

    PubMed

    Almela, Celia; Castelló, María L; Tarrazó, José; Ortolá, María D

    2014-12-01

    The aim of this study was to develop a minimally processed persimmon product by applying different concentrations of thyme essential oil or lemon essential oil on the product in order to increase its shelf life. Essential oils were applied on cut persimmon in a preliminary stage of immersion, and the samples were then stored at 4 ℃ for seven days. Moisture content, soluble solids content, antioxidant capacity, total phenols, pH, optical and mechanical properties and microbiology counts were periodically analysed. Noteworthy was that the application of thyme essential oil in the washing stage improved the preservation of the fruits' colour. All samples would be considered safe according to microbiology requirements and based on the period of study, regardless of the type of essential oil applied.

  19. Diphtheria on Skid Road, Seattle, Wash., 1972-75.

    PubMed Central

    Pedersen, A H; Spearman, J; Tronca, E; Bader, M; Harnisch, J

    1977-01-01

    From July 1972 to December 1975, an unusual outbreak of diphtheria in Seattle, Wash., resulted in a total of 558 cases and carriers, mostly among heavy alcohol users. Skin infections were predominant. Four white men died. The highest attack rate was among native American Indians. Environmental contamination and poor personal hygience were believed to be important in continuation of the epidemic, but could not be proved. Control measures included casefinding, isolation and quarantine, sanitizing dwelling units and mass immunization with Td toxoid. The high-risk geographic area was the city's Skid Road. This area continues to be the reservoir of continuing infection, but not all population subgroups there have been at equal risk. Spread to other geographic areas of the city and county has been minimal and remains under control. PMID:877208

  20. [Bactericidal power's assessment of eight antiseptic products intended to surgeon's hand-washing (author's transl)].

    PubMed

    Charrel, J; Gevaudan, M J; Mallet, M N; Blancard, A; Gevaudan, P

    1977-01-01

    A standard hand-washing technique was used in order to test the relative effectiveness of eight both detergent and alcoholic preparations intended to surgeon's hands disinfection. A single four or seven minutes washing with alcoholic solutions was shown to eliminate a much larger proportion of the skin flora than could be removed by a single four or seven minutes hand-washing with detergent antiseptic preparations. Authors have also determined effect of wearing surgical rubber gloves after skin disinfection and compared viable bacterial counts in hand washings immediately after the antiseptic treatment and when gloves had been worn for one hour.

  1. Characterising nutrients wash-off for effective urban stormwater treatment design.

    PubMed

    Miguntanna, Nandika P; Liu, An; Egodawatta, Prasanna; Goonetilleke, Ashantha

    2013-05-15

    This paper characterises nitrogen and phosphorus wash-off processes on urban road surfaces to create fundamental knowledge to strengthen stormwater treatment design. The study outcomes confirmed that the composition of initially available nutrients in terms of their physical association with solids and chemical speciation determines the wash-off characteristics. Nitrogen and phosphorus wash-off processes are independent of land use, but there are notable differences. Nitrogen wash-off is a "source limiting" process while phosphorus wash-off is "transport limiting". Additionally, a clear separation between nitrogen and phosphorus wash-off processes based on dissolved and particulate forms confirmed that the common approach of replicating nutrients wash-off based on solids wash-off could lead to misleading outcomes particularly in the case of nitrogen. Nitrogen is present primarily in dissolved and organic form and readily removed even by low intensity rainfall events, which is an important consideration for nitrogen removal targeted treatment design. In the case of phosphorus, phosphate constitutes the primary species in wash-off for the particle size fraction <75 μm, while other species are predominant in particle size range >75 μm. This means that phosphorus removal targeted treatment design should consider both phosphorus speciation as well as particle size.

  2. Efficacy of hand washing procedures on bacterial contamination of hydrogel contact lenses.

    PubMed

    Ly, V T; Simmons, P A; Edrington, T B; Wechsler, S; De Land, P N

    1997-05-01

    The effect of various hand washing regimens on transfer of bacterial contaminants from the hands to a hydrogel contact lenses was evaluated. Each of 47 subjects performed 5 different hand washing procedures, and then handled a new, sterile hydrogel contact lens. The lenses were cultured to determine colony-forming units (CFUs) and microbial identity. Median CFUs on lenses handled after washing with water, soap and water, or soap and water followed by towel drying were higher than the median CFU for lenses handled after no hand washing. The median CFU for lenses handled after soap and water washing followed by an alcohol wipe was not different from the no washing group. The majority of the contaminants were identified as Staphylococcus epidermidis. These results show that ordinary hand washing alone does not decrease, and may even increase, the amount of contaminants transferred from the hands to a hydrogel lens. Use of an alcoholic wipe after hand washing reverses this effect. Hand washing is still recommended in contact lens hygiene for removal of more pathogenic contaminants.

  3. [Strengthening Effects of Sodium Salts on Washing Kerosene Contaminated Soil with Surfactants].

    PubMed

    Huang, Zhao-lu; Chen, Quan-yuan; Zhou, Juan; Xie, Mo-han

    2015-05-01

    The impact of sodium salt on kerosene contaminated soil washing with surfactants was investigated. The results indicated that sodium silicate greatly enhanced the washing efficiency of SDS. Sodium tartrate can largely enhance the washing efficiency of SDBS and Brij35. Sodium salts can enhance the washing efficiency on kerosene contaminated with TX-100. No significant differences were observed between different sodium salts. Sodium salt of humic acid and sodium silicate had similar enhancement on kerosene contaminated soil washing with saponin. Sodium humate can be a better choice since its application can also improve soil quality. The enhancement of sodium silicate on kerosene contaminated soil washing with Tw-80 increased with the increase of Tw-80 dosage. However, the impact of sodium chloride and sodium tartrate was opposite to sodium silicate. Sodium salts can reduce surface tension and critical micelle concentration of ionic surfactants to enhance the washing. Sodium salts can also reduce re-adsorption of oil to soil with nonionic surfactants to enhance the washing. Kerosene contamination can increase the contact angle of soil, which indicated the increase of hydrophilicity of soil. Washing with surfactants can reduce the hydrophilicitiy of soil according to contact angle measurement, which indicated that kerosene contaminated soil remediation with surfactant can also benefit nutrient and water transportation in the contaminated soil.

  4. Chelator induced phytoextraction and in situ soil washing of Cu.

    PubMed

    Kos, Bostjan; Lestan, Domen

    2004-11-01

    In a soil column experiment, we investigated the effect of 5 mmol kg(-1) soil addition of citric acid, ethylenediamine tetraacetate (EDTA), diethylenetriamine-pentaacetate (DTPA) and [S,S]-stereoisomer of ethylenediamine-disuccinate (EDDS) on phytoextraction of Cu from a vineyard soil with 162.6 mg kg(-1) Cu, into the test plant Brassica rapa var. pekinensis. We also examined the use of a horizontal permeable barrier, composed of layers of nutrient enriched sawdust and apatite, for reduction of chelator induced Cu leaching. The addition of all chelators, except citric acid, enhanced Cu mobility and caused leaching of 19.5-23% of initial total Cu from the soil column. However, Cu plant uptake did not increase accordingly; the most effective was the EDDS treatment, in which plant Cu concentration reached 37.8 +/-1.3 mg kg(-1) Cu and increased by 3.3-times over the control treatment. The addition of none of the chelators in the concentration range from 5 to 15 mmol kg(-1) exerted any toxic effect on respiratory soil microorganisms. When EDDS was applied into the columns with horizontal permeable barriers, only 0.53 +/- 0.32% of the initial total Cu was leached. Cu (36.7%) was washed from the 18 cm soil layer above the barrier and accumulated in the barrier. Our results indicate that rather than for a reduction of Cu leaching during rather ineffective chelate induced Cu phytoextraction, horizontal permeable barriers could be more effective in a new remediation technique of controlled in situ soil washing of Cu with biodegradable chelates.

  5. Spring for It: First Novels

    ERIC Educational Resources Information Center

    Hoffert, Barbara

    2010-01-01

    How do publishers describe the first novels they will be releasing this spring and summer? "Amazing," "fabulous," and "unique" are words that pop up frequently, though hats off to one publicist forthright or cheeky enough to call a work "weird Western/horror." The proof of such praise is in the reading, but why not check out this preview of first…

  6. A Breath of Spring Air

    ERIC Educational Resources Information Center

    Grady, Marilyn L.

    2009-01-01

    The most promising sights of spring in Nebraska this year were two conferences for women. One event, sponsored by Metropolitan Community College in Omaha, was a Women's History Month Tea. A second conference was the meeting of the Nebraska Women in Higher Education. These two events suggest that there is a continuing interest in women's leadership…

  7. NOVA Spring 1999 Teacher's Guide.

    ERIC Educational Resources Information Center

    Colombo, Luann; Ransick, Kristina; Recio, Belinda

    This teacher's guide complements six programs that aired on the Public Broadcasting System (PBS) in the spring of 1999. Programs include: (1) "Surviving AIDS"; (2) "Secrets of Making Money"; (3) "Escape!: Fire"; (4) "Escape!: Car Crash"; (5) "Volcanoes of the Deep"; and (6) "Odyssey of Life: Part 1. The Ultimate Journey". It provides activity…

  8. Registration of 'Rollag' spring wheat

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Fusarium head blight (FHB) (caused primarily by Fusarium graminearum Schwabe) is a disease that annually threatens wheat (Triticum aestivum L.) grown in the northern plains of the United States. Resistance to this disease is a high priority trait in the University of Minnesota’s spring wheat breedi...

  9. Research Synopsis: Spring 1983 Retention.

    ERIC Educational Resources Information Center

    Peralta Community Coll. District, Oakland, CA. Office of Research, Planning and Development.

    An analysis of spring 1983 retention rates and grade distributions within the Peralta Community College District (PCCD) revealed: (1) College of Alameda had the highest successful retention rate in the PCCD, defined as the total of all students who completed the term with a grade of A, B, C, D, or CR (credit); (2) the PCCD's successful retention…

  10. Voronoi Diagrams and Spring Rain

    ERIC Educational Resources Information Center

    Perham, Arnold E.; Perham, Faustine L.

    2011-01-01

    The goal of this geometry project is to use Voronoi diagrams, a powerful modeling tool across disciplines, and the integration of technology to analyze spring rainfall from rain gauge data over a region. In their investigation, students use familiar equipment from their mathematical toolbox: triangles and other polygons, circumcenters and…

  11. NOVA Spring 2000 Teacher's Guide.

    ERIC Educational Resources Information Center

    Colombo, Luann; Gregoire, Tanya; Ransick, Kristina; Sammons, Fran Lyons; Sammons, James

    This teacher's guide complements six programs that aired on the Public Broadcasting System (PBS) in the spring of 2000. Programs include: (1) "Lost on Everest"; (2) "Lost Tribes of Israel"; (3) "Crocodiles"; (4) "Lost at Sea: The Search for Longitude"; (5) "Global Warming"; and (6) "Secrets of Lost Empires". It provides activity set-ups related to…

  12. The Forced Soft Spring Equation

    ERIC Educational Resources Information Center

    Fay, T. H.

    2006-01-01

    Through numerical investigations, this paper studies examples of the forced Duffing type spring equation with [epsilon] negative. By performing trial-and-error numerical experiments, the existence is demonstrated of stability boundaries in the phase plane indicating initial conditions yielding bounded solutions. Subharmonic boundaries are…

  13. Community Needs Assessment, Spring 1982.

    ERIC Educational Resources Information Center

    Dennis-Rounds, Jan

    In Spring 1982, a districtwide survey was conducted by Cerritos College (CC) to assess the educational needs of the surrounding community. Residents were asked to provide demographic information and respond to questions about their awareness of the college, their perception and evaluation of various CC roles, and their preferences for courses and…

  14. Finding Spring on Planet X

    ERIC Educational Resources Information Center

    Simoson, Andrew J.

    2007-01-01

    For a given orbital period and eccentricity, we determine the maximum time lapse between the winter solstice and the spring equinox on a planet. In addition, given an axial precession path, we determine the effects on the seasons. This material can be used at various levels to illustrate ideas such as periodicity, eccentricity, polar coordinates,…

  15. Carnivorous arthropods after spring flood

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Spring flooding is a common practice in Wisconsin cranberries, but flooding as insect control produces variable results among marshes. This project is aimed at figuring out why it works, and why it sometimes doesn’t. We have focused on tracking arthropod populations to explain the observed patterns ...

  16. The Forced Hard Spring Equation

    ERIC Educational Resources Information Center

    Fay, Temple H.

    2006-01-01

    Through numerical investigations, various examples of the Duffing type forced spring equation with epsilon positive, are studied. Since [epsilon] is positive, all solutions to the associated homogeneous equation are periodic and the same is true with the forcing applied. The damped equation exhibits steady state trajectories with the interesting…

  17. Archaeal Nitrification in Hot Springs

    NASA Astrophysics Data System (ADS)

    Richter, A.; Daims, H.; Reigstad, L.; Wanek, W.; Wagner, M.; Schleper, C.

    2006-12-01

    Biological nitrification, i.e. the aerobic conversion of ammonia to nitrate via nitrite, is a major component of the global nitrogen cycle. Until recently, it was thought that the ability to aerobically oxidize ammonia was confined to bacteria of the phylum Proteobacteria. However, it has recently been shown that Archaea of the phylum Crenarchaeota are also capable of ammonia oxidation. As many Crenarchaeota are thermophilic or hyperthermophilic, and at least some of them are capable of ammonia oxidation we speculated on the existence of (hyper)thermophilic ammonia-oxidizing archaea (AOA). Using PCR primers specifically targeting the archaeal ammonia monooxygenase (amoA) gene, we were indeed able to confirm the presence of such organisms in several hot springs in Reykjadalur, Iceland. These hot springs exhibited temperatures well above 80 °C and pH values ranging from 2.0 to 4.5. To proof that nitrification actually took place under these extreme conditions, we measured gross nitrification rates by the isotope pool dilution method; we added 15N-labelled nitrate to the mud and followed the dilution of the label by nitrate production from ammonium either in situ (incubation in the hot spring) or under controlled conditions in the laboratory (at 80 °C). The nitrification rates in the hot springs ranged from 0.79 to 2.22 mg nitrate-N per L of mud and day. Controls, in which microorganisms were killed before the incubations, demonstrated that the nitrification was of biological origin. Addition of ammonium increased the gross nitrification rate approximately 3-fold, indicating that the nitrification was ammonium limited under the conditions used. Collectively, our study provides evidence that (1) AOA are present in hot springs and (2) that they are actively nitrifying. These findings have major implications for our understanding of nitrogen cycling of hot environments.

  18. Short communication: Automatic washing of hooves can help control digital dermatitis in dairy cows.

    PubMed

    Thomsen, Peter T; Ersbøll, Annette Kjær; Sørensen, Jan Tind

    2012-12-01

    The objectives of this study were to develop and test a system for automatic washing of the hooves of dairy cows and to evaluate the effect of frequent automatic washing on the prevalence of digital dermatitis (DD). An automatic hoof washer was developed in an experimental dairy herd and tested in 6 commercial dairy herds in 2 experiments (1 and 2). In the experimental herd, automatic hoof washing resulted in cleaner hooves. In experiments 1 and 2, cows were washed after each milking on the left side only, leaving the right side unwashed as a within-cow control. In experiment 1, hooves were washed with a water and 0.4% soap solution. In experiment 2, hooves were washed with water only. In each experiment, DD was scored in a hoof-trimming chute approximately 60 d after the start of hoof washing. Data were analyzed using a generalized linear mixed model. The outcome was the DD status of each leg (DD positive or DD negative). Herd and cow within herd were included as random effects, and treatment (washing or control) was included as a fixed effect. The statistical analyses showed that the odds ratio of having DD was 1.48 in the control leg compared with the washed leg in experiment 1. In experiment 2, the odds ratio of having DD was 1.27 in the control leg compared with the washed leg. We concluded that automatic washing of hooves with water and soap can help decrease the prevalence of DD in commercial dairy herds.

  19. Is the wash-off process of road-deposited sediment source limited or transport limited?

    PubMed

    Zhao, Hongtao; Chen, Xuefei; Hao, Shaonan; Jiang, Yan; Zhao, Jiang; Zou, Changliang; Xie, Wenxia

    2016-09-01

    An in-depth understanding of the road-deposited sediments (RDS) wash-off process is essential to estimation of urban surface runoff pollution load and to designing methods to minimize the adverse impacts on the receiving waters. There are two debatable RDS wash-off views: source limited and transport limited. The RDS build-up and wash-off process was characterized to explore what determines the wash-off process to be source limited or transport limited based on twelve RDS sampling activities on an urban road in Beijing. The results showed that two natural rain events (2.0mm and 23.2mm) reduced the total RDS mass by 30%-40%, and that finer particles (<105μm) contributed 60%-80% of the wash-off load. Both single- and multi-rain events caused the RDS particle grain size to become coarser, while dry days made the RDS particle grain size finer. These findings indicated that the bulk RDS particles wash-off tends to be transport limited, but that finer particles tend to be source limited. To further explore and confirm the results of the field experiment, a total of 40 simulated rain events were designed to observe the RDS wash-off with different particle size fractions. The finer particles have a higher wash-off percentage (Fw) than the coarser particles, and the Fw values provide a good view to characterize the wash-off process. The key conclusions drawn from the combined field and simulated experiments data are: (i) Finer and coarser particle wash-off processes tend to be source limited and transport limited, respectively. (ii) The source and transport limited processes occur during the initial period (the first flush) and later periods, respectively. (iii) The smaller and larger rain events tend to be transport limited and source limited, respectively. Overall, the wash-off process is generally a combination of source and transport limited processes.

  20. Is the wash-off process of road-deposited sediment source limited or transport limited?

    PubMed

    Zhao, Hongtao; Chen, Xuefei; Hao, Shaonan; Jiang, Yan; Zhao, Jiang; Zou, Changliang; Xie, Wenxia

    2016-09-01

    An in-depth understanding of the road-deposited sediments (RDS) wash-off process is essential to estimation of urban surface runoff pollution load and to designing methods to minimize the adverse impacts on the receiving waters. There are two debatable RDS wash-off views: source limited and transport limited. The RDS build-up and wash-off process was characterized to explore what determines the wash-off process to be source limited or transport limited based on twelve RDS sampling activities on an urban road in Beijing. The results showed that two natural rain events (2.0mm and 23.2mm) reduced the total RDS mass by 30%-40%, and that finer particles (<105μm) contributed 60%-80% of the wash-off load. Both single- and multi-rain events caused the RDS particle grain size to become coarser, while dry days made the RDS particle grain size finer. These findings indicated that the bulk RDS particles wash-off tends to be transport limited, but that finer particles tend to be source limited. To further explore and confirm the results of the field experiment, a total of 40 simulated rain events were designed to observe the RDS wash-off with different particle size fractions. The finer particles have a higher wash-off percentage (Fw) than the coarser particles, and the Fw values provide a good view to characterize the wash-off process. The key conclusions drawn from the combined field and simulated experiments data are: (i) Finer and coarser particle wash-off processes tend to be source limited and transport limited, respectively. (ii) The source and transport limited processes occur during the initial period (the first flush) and later periods, respectively. (iii) The smaller and larger rain events tend to be transport limited and source limited, respectively. Overall, the wash-off process is generally a combination of source and transport limited processes. PMID:27135567

  1. Portrait of a Geothermal Spring, Hunter's Hot Springs, Oregon.

    PubMed

    Castenholz, Richard W

    2015-01-27

    Although alkaline Hunter's Hot Springs in southeastern Oregon has been studied extensively for over 40 years, most of these studies and the subsequent publications were before the advent of molecular methods. However, there are many field observations and laboratory experiments that reveal the major aspects of the phototrophic species composition within various physical and chemical gradients of these springs. Relatively constant temperature boundaries demark the upper boundary of the unicellular cyanobacterium, Synechococcus at 73-74 °C (the world-wide upper limit for photosynthesis), and 68-70 °C the upper limit for Chloroflexus. The upper limit for the cover of the filamentous cyanobacterium, Geitlerinema (Oscillatoria) is at 54-55 °C, and the in situ lower limit at 47-48 °C for all three of these phototrophs due to the upper temperature limit for the grazing ostracod, Thermopsis. The in situ upper limit for the cyanobacteria Pleurocapsa and Calothrix is at ~47-48 °C, which are more grazer-resistant and grazer dependent. All of these demarcations are easily visible in the field. In addition, there is a biosulfide production in some sections of the springs that have a large impact on the microbiology. Most of the temperature and chemical limits have been explained by field and laboratory experiments.

  2. Triangular springs for modeling nonlinear membranes.

    PubMed

    Delingette, Hervé

    2008-01-01

    This paper provides a formal connexion between springs and continuum mechanics in the context of one-dimensional and two-dimensional elasticity. In a first stage, the equivalence between tensile springs and the finite element discretization of stretching energy on planar curves is established. Furthermore, when considering a quadratic strain function of stretch, we introduce a new type of springs called tensile biquadratic springs. In a second stage, we extend this equivalence to non-linear membranes (St Venant-Kirchhoff materials) on triangular meshes leading to triangular biquadratic and quadratic springs. Those tensile and angular springs produce isotropic deformations parameterized by Young modulus and Poisson ratios on unstructured meshes in an efficient and simple way. For a specific choice of the Poisson ratio, 0.3, we show that regular spring-mass models may be used realistically to simulate a membrane behavior. Finally, the different spring formulations are tested in pure traction and cloth simulation experiments.

  3. 49 CFR 230.111 - Spring rigging.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... considered the top.) Broken springs not exceeding these requirements may be repaired by applying clips providing the clips can be made to remain in place; (2) Any spring with leaves excessively shifting in...

  4. 49 CFR 230.111 - Spring rigging.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... considered the top.) Broken springs not exceeding these requirements may be repaired by applying clips providing the clips can be made to remain in place; (2) Any spring with leaves excessively shifting in...

  5. 14 CFR 23.687 - Spring devices.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... STANDARDS: NORMAL, UTILITY, ACROBATIC, AND COMMUTER CATEGORY AIRPLANES Design and Construction Control Systems § 23.687 Spring devices. The reliability of any spring device used in the control system must be... unsafe flight characteristics....

  6. 14 CFR 23.687 - Spring devices.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... STANDARDS: NORMAL, UTILITY, ACROBATIC, AND COMMUTER CATEGORY AIRPLANES Design and Construction Control Systems § 23.687 Spring devices. The reliability of any spring device used in the control system must be... unsafe flight characteristics....

  7. 14 CFR 23.687 - Spring devices.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... STANDARDS: NORMAL, UTILITY, ACROBATIC, AND COMMUTER CATEGORY AIRPLANES Design and Construction Control Systems § 23.687 Spring devices. The reliability of any spring device used in the control system must be... unsafe flight characteristics....

  8. 14 CFR 23.687 - Spring devices.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... STANDARDS: NORMAL, UTILITY, ACROBATIC, AND COMMUTER CATEGORY AIRPLANES Design and Construction Control Systems § 23.687 Spring devices. The reliability of any spring device used in the control system must be... unsafe flight characteristics....

  9. Time changes in radiocesium wash-off from various land uses after the Fukushima Daiichi NPP accident

    NASA Astrophysics Data System (ADS)

    Onda, Yuichi; Kato, Hiroaki; Yoshimura, Kazuya; Tsujimura, Maki; Wakiyama, Yoshifumi; Taniguchi, Keisuke; Sakaguchi, Aya; Yamamoto, Masayoshi

    2014-05-01

    A number of studies have been conducted to monitor and model the time series change of radiocesium transfer through aquatic systems after significant fallout, especially from the Chernobyl disaster. However, no data is available for the temporal changes of radiocesium concentration in environmental materials such as soil and water after the Fukushima Daiichi nuclear power plant accident. Our research team has been monitoring the environmental consequences of radioactive contamination just after the Fukushima Daiichi NPP accident in Yamakiya-district, Kawamata town, Fukushima prefecture. Research items are listed below. 1. Radiocesium wash-off from the runoff-erosion plot under different land use. 2. Measurement of radiocesium transfer in forest environment, in association with hydrological pathways such as throughfall and overlandflow on hillslope. 3. Monitoring on radiocesium concentration in soil water, ground water, and spring water. 4. Monitoring of dissolved and particulate radiocesium concentration in river water, and stream water from the forested catchment. 5.Measurement of radiocesium content in drain water and suspended sediment from paddy field. Our monitoring result demonstrated that the Cs-137 concentration in eroded sediment from the runoff-erosion plot has been almost constant for the past 3 years, however the Cs-137 concentration of suspended sediment from the forested catchment showed slight decrease through time. On the other hand, the suspended sediment from paddy field and those in river water from large catchments exhibited rapid decrease in Cs-137 concentration with time. The decreasing trend of Cs-137 concentration were fitted by the two-component exponential model, differences in decreasing rate of the model were compared and discussed among various land uses and catchment scales. Such analysis can provide important insights into the future prediction of the radiocesium wash-off from catchments with different land uses.

  10. 40 CFR 429.110 - Applicability; description of the log washing subcategory.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 29 2010-07-01 2010-07-01 false Applicability; description of the log... (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS TIMBER PRODUCTS PROCESSING POINT SOURCE CATEGORY Log Washing Subcategory § 429.110 Applicability; description of the log washing subcategory. This subpart applies...

  11. Evaluation of a Hand Washing Program for 2nd-Graders

    ERIC Educational Resources Information Center

    Tousman, Stuart; Arnold, Dani; Helland, Wealtha; Roth, Ruth; Heshelman, Nannatte; Castaneda, Oralia; Fischer, Emily; O'Neil, Kristen; Bileto, Stephanie

    2007-01-01

    The purpose of this project was to determine if a multiple-week learner-centered hand washing program could improve hand hygiene behaviors of 2nd-graders in a northern Illinois public school system. Volunteers from the Rockford Hand Washing Coalition went into 19 different classrooms for 4 consecutive weeks and taught a learner-centered program.…

  12. Using Olfaction and Unpleasant Reminders to Reduce the Intention-behavior Gap in Hand Washing.

    PubMed

    Pellegrino, Robert; Crandall, Philip G; Seo, Han-Seok

    2016-01-06

    Lack of hand washing is a leading cause of food borne illnesses. To successfully increase hand hygiene compliance, interventions must have continual engagement with employees. This study used a real-time prospective memory (PM) scenario to measure the effectiveness of a control and sensory reminders of disgust to influence hand washing behavior and performance. First, a model of hand washing performance was built by having six participants' hands contaminated with GermGlo (a florescent micro-particle) and then washed their hands using predetermined protocols while monitored by an electronic hand hygiene verification (HHV) system. Next, eighty Hispanic/Latino participants, in a between-group experimental design, performed a PM experiment while one of four reminders were present (hand washing poster, disgusting image, disgusting sound, and disgusting odor) as the HHV recorded their hand washing performance. Visual cues, typical of hand washing campaigns, were not as effective at increasing hand hygiene compliance as disgust-induced sensory cues. Furthermore, olfactory disgust showed a significantly higher probability that individuals would engage in hand washing behaviors than all other conditions. This study provides new insight into the effectiveness of different senses and emotion to reduce the intention-behavior gap associated with modifying behaviors, and broadens current PM research to a real-time application.

  13. 40 CFR 447.10 - Applicability; description of the oil-base solvent wash ink subcategory.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ...-base solvent wash ink subcategory. 447.10 Section 447.10 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS (CONTINUED) INK FORMULATING POINT SOURCE CATEGORY Oil-Base Solvent Wash Ink Subcategory § 447.10 Applicability; description of the oil-base...

  14. 40 CFR 447.10 - Applicability; description of the oil-base solvent wash ink subcategory.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ...-base solvent wash ink subcategory. 447.10 Section 447.10 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS (CONTINUED) INK FORMULATING POINT SOURCE CATEGORY Oil-Base Solvent Wash Ink Subcategory § 447.10 Applicability; description of the oil-base...

  15. 40 CFR 447.10 - Applicability; description of the oil-base solvent wash ink subcategory.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ...-base solvent wash ink subcategory. 447.10 Section 447.10 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS (CONTINUED) INK FORMULATING POINT SOURCE CATEGORY Oil-Base Solvent Wash Ink Subcategory § 447.10 Applicability; description of the oil-base...

  16. Factors Influencing Hand Washing Behaviour in Primary Schools: Process Evaluation within a Randomized Controlled Trial

    ERIC Educational Resources Information Center

    Chittleborough, Catherine R.; Nicholson, Alexandra L.; Basker, Elaine; Bell, Sarah; Campbell, Rona

    2012-01-01

    This article explores factors that may influence hand washing behaviour among pupils and staff in primary schools. A qualitative process evaluation within a cluster randomized controlled trial included pupil focus groups (n = 16, aged 6-11 years), semi-structured interviews (n = 16 teachers) and observations of hand washing facilities (n = 57).…

  17. Hand-washing behaviour and nurses' knowledge after a training programme.

    PubMed

    Erkan, Tulay; Findik, Ummu Yildiz; Tokuc, Burcu

    2011-10-01

    The aim of this study was to evaluate the nurses' hand-washing behaviour and knowledge before and after a training programme. This prospective study involved 200 nurses who participated in hand-washing training at a university hospital in Turkey. The data were collected using a personal information form and pre- and post-test surveys that had been developed by the researchers. During the study, the nurses received 40 min of training on hand washing and a handbook prepared by the researchers. The hand-washing behaviour and knowledge of the nurses were assessed before training and 1 month after the training. To analyse the data, descriptive statistics, a t-test and a Mc Nemar chi-squared test were used. Following the training, there was a significant increase in the frequency of hand washing by the nurses (t = -2.202, P = 0.029), together with an increase in the time allowed for hand washing (P = 0.024, P < 0.05), knowledge of hand-washing practices (t = -16.081, P < 0.05) and quality (t = -10.874, P < 0.05). Planned training programmes for hand washing should be implemented to improve the behaviour and knowledge of nurses. PMID:21939477

  18. Influence of pollutant build-up on variability in wash-off from urban road surfaces.

    PubMed

    Wijesiri, Buddhi; Egodawatta, Prasanna; McGree, James; Goonetilleke, Ashantha

    2015-09-15

    Variability in the pollutant wash-off process is a concept which needs to be understood in-depth in order to better assess the outcomes of stormwater quality models, and thereby strengthen stormwater pollution mitigation strategies. Current knowledge about the wash-off process does not extend to a clear understanding of the influence of the initially available pollutant build-up on the variability of the pollutant wash-off load and composition. Consequently, pollutant wash-off process variability is poorly characterised in stormwater quality models, which can result in inaccurate stormwater quality predictions. Mathematical simulation of particulate wash-off from three urban road surfaces confirmed that the wash-off load of particle size fractions < 150 μm and > 150 μm after a storm event vary with the build-up of the respective particle size fractions available at the beginning of the storm event. Furthermore, pollutant load and composition associated with the initially available build-up of < 150 μm particles predominantly influence the variability in washed-off pollutant load and composition. The influence of the build-up of pollutants associated with > 150 μm particles on wash-off process variability is significant only for relatively shorter duration storm events.

  19. 33 CFR 157.160 - Tanks: Ballasting and crude oil washing.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 33 Navigation and Navigable Waters 2 2013-07-01 2013-07-01 false Tanks: Ballasting and crude oil... CARRYING OIL IN BULK Crude Oil Washing (COW) System on Tank Vessels Cow Operations § 157.160 Tanks: Ballasting and crude oil washing. (a) The owner, operator, and master of a tank vessel under §...

  20. 33 CFR 157.160 - Tanks: Ballasting and crude oil washing.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 33 Navigation and Navigable Waters 2 2014-07-01 2014-07-01 false Tanks: Ballasting and crude oil... CARRYING OIL IN BULK Crude Oil Washing (COW) System on Tank Vessels Cow Operations § 157.160 Tanks: Ballasting and crude oil washing. (a) The owner, operator, and master of a tank vessel under §...