Sample records for kannus tero jrvinen
-
Flügge, Tabea V; Schlager, Stefan; Nelson, Katja; Nahles, Susanne; Metzger, Marc C
2013-09-01
Digital impression devices are used alternatively to conventional impression techniques and materials. The aims of this study were to evaluate the precision of digital intraoral scanning under clinical conditions (iTero; Align Technologies, San Jose, Calif) and to compare it with the precision of extraoral digitization. One patient received 10 full-arch intraoral scans with the iTero and conventional impressions with a polyether impression material (Impregum Penta; 3M ESPE, Seefeld, Germany). Stone cast models manufactured from the impressions were digitized 10 times with an extraoral scanner (D250; 3Shape, Copenhagen, Denmark) and 10 times with the iTero. Virtual models provided by each method were roughly aligned, and the model edges were trimmed with cutting planes to create common borders (Rapidform XOR; Inus Technologies, Seoul, Korea). A second model alignment was then performed along the closest distances of the surfaces (Artec Studio software; Artec Group, Luxembourg, Luxembourg). To assess precision, deviations between corresponding models were compared. Repeated intraoral scanning was evaluated in group 1, repeated extraoral model scanning with the iTero was assessed in group 2, and repeated model scanning with the D250 was assessed in group 3. Deviations between models were measured and expressed as maximums, means, medians, and root mean square errors for quantitative analysis. Color-coded displays of the deviations allowed qualitative visualization of the deviations. The greatest deviations and therefore the lowest precision were in group 1, with mean deviations of 50 μm, median deviations of 37 μm, and root mean square errors of 73 μm. Group 2 showed a higher precision, with mean deviations of 25 μm, median deviations of 18 μm, and root mean square errors of 51 μm. Scanning with the D250 had the highest precision, with mean deviations of 10 μm, median deviations of 5 μm, and root mean square errors of 20 μm. Intraoral and extraoral scanning
-
NASA Astrophysics Data System (ADS)
da Fonseca, Gabriela Magalhães; Jordt-Evangelista, Hanna; Queiroga, Gláucia Nascimento
2018-03-01
In the worldwide known Quadrilátero Ferrífero and the adjacent terrains, southeastern Brazil, many serpentinite and soapstone quarries, and some rare bodies of metaultramafic rocks that partially preserve minerals or textures from the original igneous protolith can be found. It is not known if the protoliths and the ages of the metaultramafic rocks found in the Quadrilátero Ferrífero (and its oriental basement) and Mineiro Belt regions are the same or if they represent distinct magmatic episodes. The petrogenetic investigation, specially concerning the REE contents, aimed to gather informations about the type of magmatism and the mantle source in order to compare the metaultramafic rocks of both regions. The interpretation of the data concerning petrography, mineral chemistry and geochemistry shows that the metaultramafic rocks are similar to komatiitic peridotites, with MgO contents > 22 wt % and TiO2 < 0.9 wt %. The plot of the REE for the lithotypes found in the Quadrilátero Ferrífero shows decrease in LREE possibly reflecting the depletion of the mantle source. On the other hand the samples from the Mineiro Belt are enriched in LREE suggesting a mantle source enriched in these elements. This enrichment may have been caused by mantle metassomatism that occurred during accretion of the Paleoproterozoic magmatic arc that generated the Mineiro belt. In this paper, we therefore suggest two periods of ultramafic magmatism. The first one found in the Archean basement of the Quadrilátero Ferrífero, with a depleted mantle source. The second occurred in the Paleoproterozoic basement of the Mineiro belt, having a metassomatized mantle as source.
-
Activation of immobilized enzymes by acoustic wave resonance oscillation.
Nishiyama, Hiroshi; Watanabe, Tomoya; Inoue, Yasunobu
2014-12-01
Acoustic wave resonance oscillation has been used successfully in the development of methods to activate immobilized enzyme catalysts. In this study, resonance oscillation effects were demonstrated for enzyme reactions on galactose oxidase (GAD), D-amino acid oxidase (DAAO), and L-amino acid oxidase (LAAO), all of which were immobilized covalently on a ferroelectric lead zirconate titanate (PZT) device that could generate thickness-extensional resonance oscillations (TERO) of acoustic waves. For galactose oxidation on immobilized GAD in a microreactor, TERO generation immediately increased enzyme activity 2- to 3-fold. Eliminating TERO caused a slight decrease in the activity, with ∼90% of the enhanced activity retained while the reaction proceeded. Contact of the enhanced enzyme with a galactose-free solution caused almost complete reversion of the activity to the original low level before TERO generation, indicating that, not only TERO-induced GAD activation, but also preservation of the increased activity, required a galactose substrate. Similar activity changes with TERO were observed for enzyme reactions on DAAO and LAAO. Kinetic analysis demonstrated that TERO helped strengthen the interactions of the immobilized enzyme with the reactant substrate and promoted formation of an activation complex. Copyright © 2014 Elsevier Inc. All rights reserved.
-
Effects of acoustic wave resonance oscillation on immobilized enzyme
NASA Astrophysics Data System (ADS)
Nishiyama, Hiroshi; Watanabe, Tomoya; Inoue, Yasunobu
2014-03-01
In aiming at developing a new method to artificially activate enzyme catalysts immobilized on surface, the effects of resonance oscillation of bulk acoustic waves were studied. Glucose oxidase (GOD) was immobilized by a covalent coupling method on a ferroelectric lead zirconate titanate (PZT) device that was able to generate thickness-extensional resonance oscillation (TERO). Glucose oxidation by the GOD enzyme was studied in a microreactor. The generation of TERO immediately increased the catalytic activity of immobilized GOD by a factor of 2-3. With turn-off of TERO, no significant activity decrease occurred, and 80-90% of the enhanced activity was maintained while the reaction proceeded. The almost complete reversion of the activity to the original low level before TERO generation was observed when the immobilized GOD was exposed to a glucose substrate-free solution. These results indicated that the presence of glucose substrate was essential for TERO-induced GOD activation and preservation of the increased activity level. The influences of reaction temperature, glucose concentration, pH, and rf electric power on the TERO activation showed that TERO strengthened the interactions of the immobilized enzyme with glucose substrate and hence promoted the formation of an activation complex.
-
NASA Astrophysics Data System (ADS)
Fabricio-Silva, Wendell; Rosière, Carlos Alberto; Bühn, Bernhard
2018-05-01
Turmalina is an important orogenic gold deposit located in the NW region of the Quadrilátero Ferrífero. The deposit is hosted in an Archean greenstone belt composed of ortho-amphibolites and pelites with interleaved tuffs metamorphosed under amphibolite facies conditions and intruded by a granite stock. The orebodies are controlled by WNW-ESE-trending shear zones, associated with hydrothermal alteration. Three deformation events are recognized in the Turmalina gold deposit: D1 and D2 are the result of a progressive Archean deformation under ductile conditions between 2749 ± 7 and 2664 ± 35 Ma; D3 is characterized by a transpressional event under ductile-brittle conditions with the age still unclear. The three generations of garnet observed show that Grt1 blastesis is pre- to syn-D1 and Grt2 growth during the late to post-deformation stages of the D2 event. The initial temperature (Grt1 core) is around 548-600 °C, whereas during late D2, the temperatures reached 633 °C (metamorphic peak-Grt2 rim), likely as a result of granite intrusion. The Grt3 resulted from re-equilibration under retrograde conditions. Two gold-bearing sulfide stages were identified: pyrrhotite-arsenopyrite ± löllingite ± chalcopyrite ± gold stage I precipitated below a metamorphic peak temperature of 598 ± 19 °C associated with S1 foliation (D1), and pyrrhotite-pyrite-arsenopyrite ± chalcopyrite ± gold stage II is located commonly along V3 quartz-carbonate veinlets with a temperature range between 442 ± 9 and 510 ± 30 °C. We suggest that the granite intrusion imposed an additional thermal effect that promoted further dehydration of country rocks. The Au derived mainly from a metamorphic fluid source but potentially mixed with magmatic fluids from the granite.
-
Benic, Goran I; Mühlemann, Sven; Fehmer, Vincent; Hämmerle, Christoph H F; Sailer, Irena
2016-11-01
Trials comparing the overall performance of fully digital and conventional workflows in reconstructive dentistry are needed. The purpose of the first part of this randomized controlled clinical trial was to determine whether optical impressions produce different results from conventional impressions with respect to time efficiency and patient and operator perceptions of the clinical workflow. Three digital impressions and 1 conventional impression were made in each of 10 participants according to a randomly generated sequence. The digital systems were Lava COS, iTero, and Cerec Bluecam. The conventional impression was made with the closed-mouth technique and polyvinyl siloxane material. The time needed for powdering, impressions, and interocclusal record was recorded. Patient and clinician perceptions of the procedures were rated by means of visual analog scales. The paired t test with Bonferroni correction was applied to detect differences (α=.05/6=.0083). The mean total working time ±standard deviation amounted to 260 ±66 seconds for the conventional impression, 493 ±193 seconds for Lava, 372 ±126 seconds for iTero, and 357 ±55 seconds for Cerec. The total working time for the conventional impression was significantly lower than that for Lava and Cerec. With regard to the working time without powdering, the differences between the methods were not statistically significant. The patient rating (very uncomfortable=0; comfortable=100) measured 61 ±34 for conventional impression, 71 ±18 for Lava, 66 ±20 for iTero, and 48 ±18 for Cerec. The differences were not statistically significant. The clinician rating (simple=0; very difficult=100) was 13 ±13 for the conventional impression, 54 ±27 for Lava, 22 ±11 for iTero, and 36 ±23 for Cerec. The differences between the conventional impression and Lava and between iTero and Lava were statistically significant. The conventional impression was more time-effective than the digital impressions. In terms of
-
NASA Astrophysics Data System (ADS)
Lee, B. K.; Tsikos, H.; Oliveira, E. P.; Lyons, T.
2016-12-01
The rise of atmospheric oxygen (O2) is a milestone in the history of life on Earth. Banded Iron Formations (BIFs) record major episodes of chemical sedimentation, while providing multiple lines of evidence for the environmental conditions present at the time of their deposition during the Archean and Paleoproterozoic. They are direct products of seawater redox, specifically of the balance between iron, sulfide, and oxygen availability. At the same, they are recorders of the broader isotopic and elemental compositions of seawater, which reflect diverse processes in the ocean and on land. In addition to their relevance to the history of environmental oxygen levels, BIFs also have enormous economic importance. BIFs from the Cauê Formation of the Minas Supergroup in the Quadrilátero Ferrífero (QF) ("Iron Quadrangle") are located on the southern edge of the São Francisco Craton. The Cauê Formation, a superior-type iron formation, is likely coeval with iron formations of the Transvaal and Hamersley basins. The geochemical properties of BIFs from the QF are poorly known, although previous studies suggest mild oxygenation of seawater at the depositional onset of the Cauê formation around 200 million years before the Great Oxidation Event (GOE) based on negative anomalies of Ce and Th/U ratios. The ultimate goal of this study is to evaluate environmental conditions proximal to the Archean-Paleoproterozoic boundary, but particularly prior to the GOE, as recorded in the Cauê Formation. Our drill core samples are unweathered and among the least altered materials available from the Itabira Group. These 197 samples cover the entire sequence of the Cauê Formation (dated at 2.65 Ga) as well as the overlying Gandarela Formation (2.4 Ga). We will look at the redox cycling of iron (Fe) and manganese (Mn) from these samples by analyzing variations on Fe and Mn concentrations as well as Fe isotope signatures that will potentially fingerprint the pathways of precipitation of
-
Jung, Yoo-Ran; Park, Ji-Man; Chun, Youn-Sic; Lee, Kkot-Nim; Kim, Minji
The objective of this study was to compare the accuracy of four different digital intraoral scanners and the effects of buccal brackets and orthodontic wire. For this study, three sets of models (Control model, BKT model with buccal bracket, and WBKT model with buccal bracket and orthodontic wire) were scanned using four different types of intraoral scanners: E4D dentist, iTero, Trios, and Zfx IntraScan. The mesiodistal width of the teeth, intercanine width, and intermolar width measured by four scanners were compared. Three-dimensional (3D) images of the brackets were taken using the four scanners. Data were analyzed with one-way ANOVA, independent t test, and post-hoc Tukey test at a significance level of P < 0.05. When comparing the 3D images with manual measurements using a traditional caliper, iTero and Trios showed the highest accuracy in horizontal measurements.iTero had the lowest values in Devmax-min of maxillary intermolar and intercanine widths (0.16 mm and 0.20 mm, respectively), whereas Trios had the lowest values in Devmax-min of mandibular intermolar and intercanine widths (0.36 mm and 0.14 mm, respectively). The horizontal variables were barely affected by the presence of buccal brackets and orthodontic wire. Comparison of 3D bracket images scanned by the four scanners showed differences in image distortion among the scanners. Bracket characteristics did not affect the 3D bracket images. The four intraoral scanners used in this study differed in accuracy. However, the results acquired by iTero and Trios were more reliable. Effects of buccal brackets and orthodontic wire on the 3D images taken by intraoral scanners were not clinically significant.
-
Shembesh, Marwa; Ali, Ala; Finkelman, Matthew; Weber, Hans-Peter; Zandparsa, Roya
2017-10-01
To compare the marginal adaptation of 3-unit zirconia fixed dental prostheses (FDPs) obtained from intraoral digital scanners (Lava True Definition, Cadent iTero), scanning of a conventional silicone impression, and the resulting master cast with an extraoral scanner (3Shape lab scanner). One reference model was fabricated from intact, non-carious, unrestored human mandibular left first premolar and first molar teeth (teeth #19 and 21), prepared for a three-unit all-ceramic FDP. Impressions of the reference model were obtained using four impression systems (n = 10), group 1 (PVS impression scan), group 2 (stone cast scan), group 3 (Cadent iTero), and group 4 (Lava True Defintion). Then the three-unit zirconia FDPs were milled. Marginal adaptation of the zirconia FDPs was evaluated using an optical comparator at four points on each abutment. The mean (SD) was reported for each group. One-way ANOVA was used to assess the statistical significance of the results, with post hoc tests conducted via Tukey's HSD. p < 0.05 was considered statistically significant. All analyses were done using SPSS 22.0. The mean (SD) marginal gaps for the recorded data from highest to lowest were silicone impression scans 81.4 μm (6.8), Cadent iTero scan 62.4 μm (5.0), master cast scan 50.2 μm (6.1), and Lava True definition scan 26.6 μm (4.7). One-way ANOVA revealed significant differences (p < 0.001) in the mean marginal gap among the groups. The Tukey's HSD tests demonstrated that the differences between all groups (silicone impression scan, master cast scan, Lava True definition scan, iTero Cadent scan) were statistically significant (all p < 0.001). On the basis of the criterion of 120 μm as the limit of clinical acceptance, all marginal discrepancy values of all groups were clinically acceptable. Within the confines of this in vitro study, it can be concluded that the marginal gap of all impression techniques was within the acceptable clinical limit (120 μm). Group 4 (Lava True
-
NASA Astrophysics Data System (ADS)
Farina, F.; Albert, C.; Lana, C.; Stevens, G.
2014-12-01
The Bação, Bonfim and Belo Horizonte domes are the largest domes in the Archaean Southern São Francisco craton (Quadrilátero Ferrífero, Brazil). These domes are mainly formed by fine-grained banded gneisses typically intruded by leucogranitic veins and by weakly foliated granites, cropping out as large batholiths and small scale-domains closely associated to the gneisses. Granites and gneisses have high silica content (70-76 wt%), K2O ranging from 2wt% to 6wt%, Sr from 600 to 40 ppm and La/Yb from 150 to 5. Based on their K2O/Na2O ratios, these rocks are subdivided in three groups: sodic (K2O/Na2O≤0.7), transitional (0.7
-
Vial, Diogenes Scipioni; DeWitt, Ed; Lobato, Lydia Maria; Thorman, Charles H.
2007-01-01
The Morro Velho gold deposit, Quadrilátero Ferrífero region, Minas Gerais, Brazil, is hosted by rocks at the base of the Archean Rio das Velhas greenstone belt. The deposit occurs within a thick carbonaceous phyllite package, containing intercalations of felsic and intermediate volcaniclastic rocks and dolomites. Considering the temporal and spatial association of the deposit with the Rio das Velhas orogeny, and location in close proximity to a major NNW-trending fault zone, it can be classified as an orogenic gold deposit. Hydrothermal activity was characterized by intense enrichment in alteration zones of carbonates, sulfides, chlorite, white mica±biotite, albite and quartz, as described in other Archean lode-type gold ores. Two types of ore occur in the deposit: dark gray quartz veins and sulfide-rich gold orebodies. The sulfide-rich orebodies range from disseminated concentrations of sulfide minerals to massive sulfide bodies. The sulfide assemblage comprises (by volume), on average, 74% pyrrhotite, 17% arsenopyrite, 8% pyrite and 1% chalcopyrite. The orebodies have a long axis parallel to the local stretching lineation, with continuity down the plunge of fold axis for at least 4.8 km. The group of rocks hosting the Morro Velho gold mineralization is locally referred to as lapa seca. These were isoclinally folded and metamorphosed prior to gold mineralization. The lapa seca and the orebodies it hosts are distributed in five main tight folds related to F1 (the best examples are the X, Main and South orebodies, in level 25), which are disrupted by NE- to E-striking shear zones. Textural features indicate that the sulfide mineralization postdated regional peak metamorphism, and that the massive sulfide ore has subsequently been neither metamorphosed nor deformed. Lead isotope ratios indicate a model age of 2.82 ± 0.05 Ga for both sulfide and gold mineralization. The lapa seca are interpreted as the results of a pre-gold alteration process and may be
-
Physarum can compute shortest paths.
Bonifaci, Vincenzo; Mehlhorn, Kurt; Varma, Girish
2012-09-21
Physarum polycephalum is a slime mold that is apparently able to solve shortest path problems. A mathematical model has been proposed by Tero et al. (Journal of Theoretical Biology, 244, 2007, pp. 553-564) to describe the feedback mechanism used by the slime mold to adapt its tubular channels while foraging two food sources s(0) and s(1). We prove that, under this model, the mass of the mold will eventually converge to the shortest s(0)-s(1) path of the network that the mold lies on, independently of the structure of the network or of the initial mass distribution. This matches the experimental observations by Tero et al. and can be seen as an example of a "natural algorithm", that is, an algorithm developed by evolution over millions of years. Copyright © 2012 Elsevier Ltd. All rights reserved.
-
2016-01-01
PURPOSE The trueness and precision of acquired images of intraoral digital scanners could be influenced by restoration type, preparation outline form, scanning technology and the application of power. The aim of this study is to perform the comparative evaluation of the 3-dimensional reproducibility of intraoral scanners (IOSs). MATERIALS AND METHODS The phantom containing five prepared teeth was scanned by the reference scanner (Dental Wings) and 5 test IOSs (E4D dentist, Fastscan, iTero, Trios and Zfx Intrascan). The acquired images of the scanner groups were compared with the image from the reference scanner (trueness) and within each scanner groups (precision). Statistical analysis was performed using independent two-samples t-test and analysis of variance (α=.05). RESULTS The average deviations of trueness and precision of Fastscan, iTero and Trios were significantly lower than the other scanners. According to the restoration type, significantly higher trueness was observed in crown and inlay than in bridge. However, no significant difference was observed among four sites of preparation outline form. If compared by the characteristics of IOS, high trueness was observed in the group adopting the active triangulation and using powder. However, there was no significant difference between the still image acquisition and video acquisition groups. CONCLUSION Except for two intraoral scanners, Fastscan, iTero and Trios displayed comparable levels of trueness and precision values in tested phantom model. Difference in trueness was observed depending on the restoration type, the preparation outline form and characteristics of IOS, which should be taken into consideration when the intraoral scanning data are utilized. PMID:27826385
-
Carbon Nanotube Array for Infrared Detection
2008-12-05
ctron Transport Charact eri stic s of a Carbon nanotub es/S i He terodimensional He tero structure." Materials Research Society, Spring meeting (2008). 3...From - To) 05-12-2008 Final 27 09 2006-26 09 2008 4 . TITLE AND SUBTITLE 5a . CONTRACT NUMBER Carbon Nanotube Array for Infrared Detection 5b...Distribution is unlimited 13 . SUPPLEMENTARY NOTES 14 . ABSTRACT We explore the basic science issues and device potential of our carbon nanotube-silicon (CNT
-
ONRASIA Scientific Information Bulletin. Volume 17, Number 4, October - December 1992
1992-12-01
department tero-technology, and technology location is less congested and much Optical devices chair assessment), and eight endowed greener than that of the...chemi- Tel: +81 3-3481-4411 had been a very good advertisement cal compound design. Some details for Al, and in fact had moved stu- and references are...Point ment for online system. Automatesvolume, of Sale data. setting of parameters when new ter- Daa ye m c t o f Facg (ra ne minal is introduced
-
1954-05-13
nont, tho propagation dia- t&IIOo In ldl-tero, tho .,..op rt.to in u .. o/oa along tho x•uh, and tho unoithlt)- in Yolto;lootor/oa al0115 the )’-OJ...root ot the diatoace aDd 01> additional propagation lou at the rato ot about 2 or 3 db,por 1000 km. The ROUEO yield,., otti,...ttd, u aholm, to bo 12...ionbAphorio layer lutlght of about 91) loo. Tho nY .. fono condah of part of the ~OW!d .... .,. pulse, followed by tho £!rat, aooond, third, fourth
-
Renne, Walter; Ludlow, Mark; Fryml, John; Schurch, Zach; Mennito, Anthony; Kessler, Ray; Lauer, Abigail
2017-07-01
As digital impressions become more common and more digital impression systems are released onto the market, it is essential to systematically and objectively evaluate their accuracy. The purpose of this in vitro study was to evaluate and compare the trueness and precision of 6 intraoral scanners and 1 laboratory scanner in both sextant and complete-arch scenarios. Furthermore, time of scanning was evaluated and correlated with trueness and precision. A custom complete-arch model was fabricated with a refractive index similar to that of tooth structure. Seven digital impression systems were used to scan the custom model for both posterior sextant and complete arch scenarios. Analysis was performed using 3-dimensional metrology software to measure discrepancies between the master model and experimental casts. Of the intraoral scanners, the Planscan was found to have the best trueness and precision while the 3Shape Trios was found to have the poorest for sextant scanning (P<.001). The order of trueness for complete arch scanning was as follows: 3Shape D800 >iTero >3Shape TRIOS 3 >Carestream 3500 >Planscan >CEREC Omnicam >CEREC Bluecam. The order of precision for complete-arch scanning was as follows: CS3500 >iTero >3Shape D800 >3Shape TRIOS 3 >CEREC Omnicam >Planscan >CEREC Bluecam. For the secondary outcome evaluating the effect time has on trueness and precision, the complete- arch scan time was highly correlated with both trueness (r=0.771) and precision (r=0.771). For sextant scanning, the Planscan was found to be the most precise and true scanner. For complete-arch scanning, the 3Shape Trios was found to have the best balance of speed and accuracy. Copyright © 2016 Editorial Council for the Journal of Prosthetic Dentistry. Published by Elsevier Inc. All rights reserved.
-
Application of Intra-Oral Dental Scanners in the Digital Workflow of Implantology
van der Meer, Wicher J.; Andriessen, Frank S.; Wismeijer, Daniel; Ren, Yijin
2012-01-01
Intra-oral scanners will play a central role in digital dentistry in the near future. In this study the accuracy of three intra-oral scanners was compared. Materials and methods: A master model made of stone was fitted with three high precision manufactured PEEK cylinders and scanned with three intra-oral scanners: the CEREC (Sirona), the iTero (Cadent) and the Lava COS (3M). In software the digital files were imported and the distance between the centres of the cylinders and the angulation between the cylinders was assessed. These values were compared to the measurements made on a high accuracy 3D scan of the master model. Results: The distance errors were the smallest and most consistent for the Lava COS. The distance errors for the Cerec were the largest and least consistent. All the angulation errors were small. Conclusions: The Lava COS in combination with a high accuracy scanning protocol resulted in the smallest and most consistent errors of all three scanners tested when considering mean distance errors in full arch impressions both in absolute values and in consistency for both measured distances. For the mean angulation errors, the Lava COS had the smallest errors between cylinders 1–2 and the largest errors between cylinders 1–3, although the absolute difference with the smallest mean value (iTero) was very small (0,0529°). An expected increase in distance and/or angular errors over the length of the arch due to an accumulation of registration errors of the patched 3D surfaces could be observed in this study design, but the effects were statistically not significant. Clinical relevance For making impressions of implant cases for digital workflows, the most accurate scanner with the scanning protocol that will ensure the most accurate digital impression should be used. In our study model that was the Lava COS with the high accuracy scanning protocol. PMID:22937030
-
Trend-surface analysis of morphometric parameters: A case study in southeastern Brazil
NASA Astrophysics Data System (ADS)
Grohmann, Carlos Henrique
2005-10-01
Trend-surface analysis was carried out on data from morphometric parameters isobase and hydraulic gradient. The study area, located in the eastern border of Quadrilátero Ferrífero, southeastern Brazil, presents four main geomorphological units, one characterized by fluvial dissection, two of mountainous relief, with a scarp of hundreds of meters of fall between them, and a flat plateau in the central portion of the fluvially dissected terrains. Morphometric maps were evaluated in GRASS-GIS and statistics were made on R statistical language, using the spatial package. Analysis of variance (ANOVA) was made to test the significance of each surface and the significance of increasing polynomial degree. The best results were achieved with sixth-order surface for isobase and second-order surface for hydraulic gradient. Shape and orientation of residual maps contours for selected trends were compared with structures inferred from several morphometric maps, and a good correlation is present.
-
In-situ observation of the chemical erosion of graphite in the scrape-off-layer of TEXTOR
NASA Astrophysics Data System (ADS)
Philipps, V.; Vietzke, E.; Erdweg, M.
1989-04-01
A sniffer probe system has been used to investigate the chemical erosion during interaction of the TEXTOR scrape-off plasma with a pyrolytic graphite plate at temperatures up to 1400 °C. Floating potential conditions as well as 200 V bias has been applied at plasma ion fluxes of about 10 18ions/cm 2 sec.Methane formation was found to be 8 × 10 -3 CH 4/H and 1.5 × 10 -2 CD 4/D + for room temperature graphite and floating potential increasing by a factor of two at temperature around 500 °C. Biasing the graphite decreases the methane yield at room temperature and increase it in the maximum temperature range. CO formation due to chemical interaction of oxygen ions with the graphite reaches ratios between 3 and 6 × 10 -2 CO/D(H) near the limiter edge under normal TEXTOR scrape-off conditions and exceeds the chemical hydro-(deu-tero-carbon formation significantly. The results are discussed in view of the present status of hydro-(deutero-)carbon formation on graphite and carbon impurity observations made in fusion experiments.
-
NASA Astrophysics Data System (ADS)
Shuster, David L.; Farley, Kenneth A.; Vasconcelos, Paulo M.; Balco, Greg; Monteiro, Hevelyn S.; Waltenberg, Kathryn; Stone, John O.
2012-05-01
Helium isotopes were measured in hematite and goethite samples from several lateritiric duricrusts (canga) developed on banded iron formations. These samples uniformly have high 3He concentrations which must arise from long periods of cosmic ray exposure. From coexisting phases from the Quadrilátero Ferrífero in east central Brazil, we determined the ratio of cosmogenic 3He in hematite to that of 21Ne in quartz to be 3.96 ± 0.19. Combined with best current estimates of the 21Ne production rate in quartz, this ratio implies a sea-level high latitude (SLHL) 3He production rate in hematite of 68.1 ± 8.1 atoms/g/yr; from the chemical composition we estimate the 3He production rate in goethite to be ~ 5% higher. We use these production rate estimates to interpret 3He concentrations measured in goethite and hematite from a ~ 10 m depth profile collected from a surface canga in Carajás, in the Amazon basin of Brazil. We find that the Carajás canga has experienced a very low rate of surface erosion (~ 0.16-0.54 m/Myr) over at least the last few millions of years. This iron-rich canga surface is remarkably resistant to erosion despite its location in a wet tropical environment. Details of the depth profile suggest that despite its stability, the canga has also been internally dynamic (translocation of material; solution and reprecipitation) over million-year timescales.
-
Flügge, Tabea Viktoria; Nelson, Katja; Schmelzeisen, Rainer; Metzger, Marc Christian
2013-08-01
To present an efficient workflow for the production of implant drilling guides using virtual planning tools. For this purpose, laser surface scanning, cone beam computed tomography, computer-aided design and manufacturing, and 3-dimensional (3D) printing were combined. Intraoral optical impressions (iTero, Align Technologies, Santa Clara, CA) and digital 3D radiographs (cone beam computed tomography) were performed at the first consultation of 1 exemplary patient. With image processing techniques, the intraoral surface data, acquired using an intraoral scanner, and radiologic 3D data were fused. The virtual implant planning process (using virtual library teeth) and the in-office production of the implant drilling guide was performed after only 1 clinical consultation of the patient. Implant surgery with a computer-aided design and manufacturing produced implant drilling guide was performed during the second consultation. The production of a scan prosthesis and multiple preoperative consultations of the patient were unnecessary. The presented procedure offers another step in facilitating the production of drilling guides in dental implantology. Four main advantages are realized with this procedure. First, no additional scan prosthesis is needed. Second, data acquisition can be performed during the first consultation. Third, the virtual planning is directly transferred to the drilling guide without a loss of accuracy. Finally, the treatment cost and time required are reduced with this facilitated production process. Copyright © 2013 American Association of Oral and Maxillofacial Surgeons. Published by Elsevier Inc. All rights reserved.
-
San José, Verónica; Bellot-Arcís, Carlos; Tarazona, Beatriz; Zamora, Natalia; O Lagravère, Manuel
2017-01-01
Background To compare the reliability and accuracy of direct and indirect dental measurements derived from two types of 3D virtual models: generated by intraoral laser scanning (ILS) and segmented cone beam computed tomography (CBCT), comparing these with a 2D digital model. Material and Methods One hundred patients were selected. All patients’ records included initial plaster models, an intraoral scan and a CBCT. Patients´ dental arches were scanned with the iTero® intraoral scanner while the CBCTs were segmented to create three-dimensional models. To obtain 2D digital models, plaster models were scanned using a conventional 2D scanner. When digital models had been obtained using these three methods, direct dental measurements were measured and indirect measurements were calculated. Differences between methods were assessed by means of paired t-tests and regression models. Intra and inter-observer error were analyzed using Dahlberg´s d and coefficients of variation. Results Intraobserver and interobserver error for the ILS model was less than 0.44 mm while for segmented CBCT models, the error was less than 0.97 mm. ILS models provided statistically and clinically acceptable accuracy for all dental measurements, while CBCT models showed a tendency to underestimate measurements in the lower arch, although within the limits of clinical acceptability. Conclusions ILS and CBCT segmented models are both reliable and accurate for dental measurements. Integration of ILS with CBCT scans would get dental and skeletal information altogether. Key words:CBCT, intraoral laser scanner, 2D digital models, 3D models, dental measurements, reliability. PMID:29410764
-
Ender, Andreas; Mehl, Albert
2015-01-01
To investigate the accuracy of conventional and digital impression methods used to obtain full-arch impressions by using an in-vitro reference model. Eight different conventional (polyether, POE; vinylsiloxanether, VSE; direct scannable vinylsiloxanether, VSES; and irreversible hydrocolloid, ALG) and digital (CEREC Bluecam, CER; CEREC Omnicam, OC; Cadent iTero, ITE; and Lava COS, LAV) full-arch impressions were obtained from a reference model with a known morphology, using a highly accurate reference scanner. The impressions obtained were then compared with the original geometry of the reference model and within each test group. A point-to-point measurement of the surface of the model using the signed nearest neighbour method resulted in a mean (10%-90%)/2 percentile value for the difference between the impression and original model (trueness) as well as the difference between impressions within a test group (precision). Trueness values ranged from 11.5 μm (VSE) to 60.2 μm (POE), and precision ranged from 12.3 μm (VSE) to 66.7 μm (POE). Among the test groups, VSE, VSES, and CER showed the highest trueness and precision. The deviation pattern varied with the impression method. Conventional impressions showed high accuracy across the full dental arch in all groups, except POE and ALG. Conventional and digital impression methods show differences regarding full-arch accuracy. Digital impression systems reveal higher local deviations of the full-arch model. Digital intraoral impression systems do not show superior accuracy compared to highly accurate conventional impression techniques. However, they provide excellent clinical results within their indications applying the correct scanning technique.
-
In vivo precision of conventional and digital methods of obtaining complete-arch dental impressions.
Ender, Andreas; Attin, Thomas; Mehl, Albert
2016-03-01
Digital impression systems have undergone significant development in recent years, but few studies have investigated the accuracy of the technique in vivo, particularly compared with conventional impression techniques. The purpose of this in vivo study was to investigate the precision of conventional and digital methods for complete-arch impressions. Complete-arch impressions were obtained using 5 conventional (polyether, POE; vinylsiloxanether, VSE; direct scannable vinylsiloxanether, VSES; digitized scannable vinylsiloxanether, VSES-D; and irreversible hydrocolloid, ALG) and 7 digital (CEREC Bluecam, CER; CEREC Omnicam, OC; Cadent iTero, ITE; Lava COS, LAV; Lava True Definition Scanner, T-Def; 3Shape Trios, TRI; and 3Shape Trios Color, TRC) techniques. Impressions were made 3 times each in 5 participants (N=15). The impressions were then compared within and between the test groups. The cast surfaces were measured point-to-point using the signed nearest neighbor method. Precision was calculated from the (90%-10%)/2 percentile value. The precision ranged from 12.3 μm (VSE) to 167.2 μm (ALG), with the highest precision in the VSE and VSES groups. The deviation pattern varied distinctly according to the impression method. Conventional impressions showed the highest accuracy across the complete dental arch in all groups, except for the ALG group. Conventional and digital impression methods differ significantly in the complete-arch accuracy. Digital impression systems had higher local deviations within the complete arch cast; however, they achieve equal and higher precision than some conventional impression materials. Copyright © 2016 Editorial Council for the Journal of Prosthetic Dentistry. Published by Elsevier Inc. All rights reserved.
-
Tonelli, Gabriel Barbosa; Tanure, Aline; Rêgo, Felipe Dutra; Carvalho, Gustavo Mayr de Lima; Simões, Taynãna César; Andrade Filho, José Dilermando
2017-01-01
Leishmaniases are a set of parasitic diseases of zoonotic origin that are transmitted by sandfly vectors in wild, rural and urban environments. Their distribution is dependent not only the distribution of vectors, but also on the distribution of mammalian reservoirs. Only by understanding the transmission cycle of these diseases, such as knowing the participating vectors and reservoirs, can one can understand the epidemiology and ecological relationships of leishmaniases. Ecotourism has become an important area of economic growth in Brazil. One of the most visited tourist attractions in the state of Minas Gerais, the Reserva Particular do Patrimônio Natural Santuário do Caraça (RPPNSC) is located in the Quadrilátero Ferrífero. The aim of this study was to contribute to the control of leishmaniasis among tourists of the RPPNPC by surveying its sand fly fauna and testing for the presence of Leishmania DNA in females. Twenty-five CDC light traps were exposed on 7 trails of the RPPNPC where samples were collected bimonthly for a year, starting in June 2013. A total of 376 specimens of 18 species and 10 genera of sandflies were captured. The predominant species were Psychodopygus lloydi (72.34%) and Pintomyia monticola (5.59%). HaeIII restriction enzyme detected and characterized Leishmania braziliensis DNA in 2 of the samples for an infection rate of 0.7% (2/266). Recent studies found specimens of Ps. lloyd infected with Leishmania braziliensis elsewhere in Minas Gerais, which may be an indication that this species is involved in the transmission of Leishmania in this state.
-
(U-Th)/He geochronology of goethite and the origin and evolution of cangas
NASA Astrophysics Data System (ADS)
Monteiro, Hevelyn S.; Vasconcelos, Paulo M.; Farley, Kenneth A.; Spier, Carlos A.; Mello, Claudio L.
2014-04-01
(U-Th)/He geochronology of 147 grains of goethite cements extracted from ferruginous duricrusts (cangas) developed on banded iron-formations from the Quadrilátero Ferrífero region, Minas Gerais, Brazil, records a history of protracted mineral dissolution-reprecipitation that started at ca. 48.1 ± 4.8 Ma and continues intermittently until the Present. A large majority of the samples (more than 30%) are younger than 2 Ma, revealing active mineral dissolution-reprecipitation in the recent past. Within cangas, goethite cements are younger near the surface and become progressively older towards the bottom of the weathering profile, indicating that iron is more effectively cycled in the parts of the weathering profile more strongly affected by biogenic activity. (U-Th)/He geochronology of 14 goethite grains from saprolites in the same profiles yield results ranging from 55.3 ± 5.5 to 25.7 ± 2.6 Ma. For a single weathering profile, goethite cements from cangas are invariably younger than goethite grains from the underlying saprolite, indicating that the duricrust and the saprolite behave as independent and separate systems responding to different environmental controls. Thorium shows conservative behaviour during goethite dissolution-reprecipitation, and it is enriched towards the surface of the weathering profile. Uranium, on the other hand, is preferentially leached from the surface into the saprolite or out of the weathering profile. Recurrent goethite dissolution-reprecipitation lends great textural complexities to cangas, but it is also responsible for its capacity to reheal when physically disrupted. This self-healing property accounts for canga’s role in armoring banded iron-formation landscapes.
-
Goracci, Cecilia; Franchi, Lorenzo; Vichi, Alessandro; Ferrari, Marco
2016-08-01
The interest on intraoral scanners for digital impressions has been growing and new devices are continuously introduced on the market. It is timely to verify whether the several scanners proposed for full-arch digital impressions have been tested under clinical conditions for validity, repeatability, reproducibility, as well as for time efficiency, and patient acceptance. An electronic search of the literature was conducted through PubMed, Scopus, Cochrane Library, Web of Science, and Embase, entering the query terms 'digital impression', 'intraoral digital impression', 'intraoral scanning', 'intraoral scanner', 'intraoral digital scanner', combined by the Boolean operator 'OR'. No language or time limitation was applied. Only studies where digital full-arch impressions had been recorded intraorally were considered. In only eight studies full-arch scans had been performed intraorally. Only four studies reported data on validity, repeatability, reproducibility of digital measurements and their samples were limited to subjects in complete permanent dentition. Only two intraoral scanners, Lava COS and iTero, were tested. Scanning times were measured in six studies and varied largely. Patients' acceptance of intraoral scanning was evaluated in four studies, but it was not specifically assessed for children. The scientific evidence so far collected on intraoral scanning is neither exhaustive, nor up-to-date. Data from full-arch scans performed in children should be collected. For a meaningful assessment of time efficiency, agreement should be reached on the procedural steps to be included in the computation of scanning time. © The Author 2015. Published by Oxford University Press on behalf of the European Orthodontic Society. All rights reserved. For permissions, please email: journals.permissions@oup.com.
-
Ali, Mehreen; Khan, Suleiman A; Wennerberg, Krister; Aittokallio, Tero
2018-04-15
.ali@helsinki.fi or tero.aittokallio@fimm.fi. Supplementary data are available at Bioinformatics online.
-
Impact of digital impression techniques on the adaption of ceramic partial crowns in vitro.
Schaefer, Oliver; Decker, Mike; Wittstock, Frank; Kuepper, Harald; Guentsch, Arndt
2014-06-01
To investigate the effects, digital impression procedures can have on the three-dimensional fit of ceramic partial crowns in vitro. An acrylic model of a mandibular first molar was prepared to receive a partial coverage all-ceramic crown (mesio-occlusal-distal inlay preparation with reduction of all cusps and rounded shoulder finish line of buccal wall). Digital impressions were taken using iTero (ITE), cara TRIOS (TRI), CEREC AC with Bluecam (CBC), and Lava COS (COS) systems, before restorations were designed and machined from lithium disilicate blanks. Both the preparation and the restorations were digitised using an optical reference-scanner. Data were entered into quality inspection software, which superimposed the records (best-fit-algorithm), calculated fit-discrepancies for every pixel, and colour-coded the results to aid visualisation. Furthermore, mean quadratic deviations (RMS) were computed and analysed statistically with a one-way ANOVA. Scheffé's procedure was applied for multiple comparisons (n=5, α=0.05). Mean marginal (internal) discrepancies were: ITE 90 (92) μm, TRI 128 (106) μm, CBC 146 (84) μm, and COS 109 (93) μm. Differences among impression systems were statistically significant at p<0.001 (p=0.039). Qualitatively, partial crowns were undersized especially around cusp tips or the occluso-approximal isthmus. By contrast, potential high-spots could be detected along the preparation finishline and at central occlusal boxes. Marginal and internal fit of milled lithium disilicate partial crowns depended on the employed digital impression technique. The investigated digital impression procedures demonstrated significant fit discrepancies. However, all fabricated restorations showed acceptable marginal and internal gap sizes, when considering clinically relevant thresholds reported in the literature. Copyright © 2014 Elsevier Ltd. All rights reserved.
-
Vecsei, Bálint; Joós-Kovács, Gellért; Borbély, Judit; Hermann, Péter
2017-04-01
To compare the accuracy (trueness, precision) of direct and indirect scanning CAD/CAM methods. A master cast with prepared abutments and edentulous parts was created from polymethyl methacrylate (PMMA). A high-resolution industrial scanner was used to create a reference model. Polyvinyl-siloxane (PVS) impressions and digital impressions with three intraoral scanners (iTero, Cerec, Trios) were made (n=10 for each) from the PMMA model. A laboratory scanner (Scan CS2) was used to digitize the sectioned cast made from the PVS impressions. The stereolithographic (STL) files of the impressions (n=40) were exported. Each file was compared to the reference using Geomagic Verify software. Six points were assigned to enable virtual calliper measurement of three distances of varying size within the arch. Methods were compared using interquartile range regression and equality-of-variance tests for precision, and mixed-effects linear regression for trueness. The mean (SD) deviation of short distance measurements from the reference value was -40.3 (79.7) μm using the indirect, and 22.3 (40.0) μm using the direct method. For the medium distance, indirect measurements deviated by 5.2 (SD: 111.3) μm, and direct measurements by 115.8 (SD: 50.7) μm, on average; for the long distance, the corresponding estimates were -325.8 (SD: 134.1) μm with the indirect, and -163.5 (SD: 145.5) μm with the direct method. Significant differences were found between the two methods (p<0.05). With both methods, the shorter the distance, the more accurate results were achieved. Virtual models obtained by digital impressions can be more accurate than their conventional counterparts. Copyright © 2016 Japan Prosthodontic Society. Published by Elsevier Ltd. All rights reserved.
-
Aragón, Mônica L C; Pontes, Luana F; Bichara, Lívia M; Flores-Mir, Carlos; Normando, David
2016-08-01
The development of 3D technology and the trend of increasing the use of intraoral scanners in dental office routine lead to the need for comparisons with conventional techniques. To determine if intra- and inter-arch measurements from digital dental models acquired by an intraoral scanner are as reliable and valid as the similar measurements achieved from dental models obtained through conventional intraoral impressions. An unrestricted electronic search of seven databases until February 2015. Studies that focused on the accuracy and reliability of images obtained from intraoral scanners compared to images obtained from conventional impressions. After study selection the QUADAS risk of bias assessment tool for diagnostic studies was used to assess the risk of bias (RoB) among the included studies. Four articles were included in the qualitative synthesis. The scanners evaluated were OrthoProof, Lava, iOC intraoral, Lava COS, iTero and D250. These studies evaluated the reliability of tooth widths, Bolton ratio measurements, and image superimposition. Two studies were classified as having low RoB; one had moderate RoB and the remaining one had high RoB. Only one study evaluated the time required to complete clinical procedures and patient's opinion about the procedure. Patients reported feeling more comfortable with the conventional dental impression method. Associated costs were not considered in any of the included study. Inter- and intra-arch measurements from digital models produced from intraoral scans appeared to be reliable and accurate in comparison to those from conventional impressions. This assessment only applies to the intraoral scanners models considered in the finally included studies. Digital models produced by intraoral scan eliminate the need of impressions materials; however, currently, longer time is needed to take the digital images. PROSPERO (CRD42014009702). None. © The Author 2016. Published by Oxford University Press on behalf of the European
-
In vivo precision of conventional and digital methods for obtaining quadrant dental impressions.
Ender, Andreas; Zimmermann, Moritz; Attin, Thomas; Mehl, Albert
2016-09-01
Quadrant impressions are commonly used as alternative to full-arch impressions. Digital impression systems provide the ability to take these impressions very quickly; however, few studies have investigated the accuracy of the technique in vivo. The aim of this study is to assess the precision of digital quadrant impressions in vivo in comparison to conventional impression techniques. Impressions were obtained via two conventional (metal full-arch tray, CI, and triple tray, T-Tray) and seven digital impression systems (Lava True Definition Scanner, T-Def; Lava Chairside Oral Scanner, COS; Cadent iTero, ITE; 3Shape Trios, TRI; 3Shape Trios Color, TRC; CEREC Bluecam, Software 4.0, BC4.0; CEREC Bluecam, Software 4.2, BC4.2; and CEREC Omnicam, OC). Impressions were taken three times for each of five subjects (n = 15). The impressions were then superimposed within the test groups. Differences from model surfaces were measured using a normal surface distance method. Precision was calculated using the Perc90_10 value. The values for all test groups were statistically compared. The precision ranged from 18.8 (CI) to 58.5 μm (T-Tray), with the highest precision in the CI, T-Def, BC4.0, TRC, and TRI groups. The deviation pattern varied distinctly depending on the impression method. Impression systems with single-shot capture exhibited greater deviations at the tooth surface whereas high-frame rate impression systems differed more in gingival areas. Triple tray impressions displayed higher local deviation at the occlusal contact areas of upper and lower jaw. Digital quadrant impression methods achieve a level of precision, comparable to conventional impression techniques. However, there are significant differences in terms of absolute values and deviation pattern. With all tested digital impression systems, time efficient capturing of quadrant impressions is possible. The clinical precision of digital quadrant impression models is sufficient to cover a broad variety of
-
Relationship between resolution and accuracy of four intraoral scanners in complete-arch impressions
Pascual-Moscardó, Agustín; Camps, Isabel
2018-01-01
Background The scanner does not measure the dental surface continually. Instead, it generates a point cloud, and these points are then joined to form the scanned object. This approximation will depend on the number of points generated (resolution), which can lead to low accuracy (trueness and precision) when fewer points are obtained. The purpose of this study is to determine the resolution of four intraoral digital imaging systems and to demonstrate the relationship between accuracy and resolution of the intraoral scanner in impressions of a complete dental arch. Material and Methods A master cast of the complete maxillary arch was prepared with different dental preparations. Using four digital impression systems, the cast was scanned inside of a black methacrylate box, obtaining a total of 40 digital impressions from each scanner. The resolution was obtained by dividing the number of points of each digital impression by the total surface area of the cast. Accuracy was evaluated using a three-dimensional measurement software, using the “best alignment” method of the casts with a highly faithful reference model obtained from an industrial scanner. Pearson correlation was used for statistical analysis of the data. Results Of the intraoral scanners, Omnicam is the system with the best resolution, with 79.82 points per mm2, followed by True Definition with 54.68 points per mm2, Trios with 41.21 points per mm2, and iTero with 34.20 points per mm2. However, the study found no relationship between resolution and accuracy of the study digital impression systems (P >0.05), except for Omnicam and its precision. Conclusions The resolution of the digital impression systems has no relationship with the accuracy they achieve in the impression of a complete dental arch. The study found that the Omnicam scanner is the system that obtains the best resolution, and that as the resolution increases, its precision increases. Key words:Trueness, precision, accuracy, resolution
-
Medication Overdoses at a Public Emergency Department in Santiago, Chile
Aguilera, Pablo; Garrido, Marcela; Lessard, Eli; Swanson, Julian; Mallon, William K.; Saldias, Fernando; Basaure, Carlos; Lara, Barbara; Swadron, Stuart P.
2016-01-01
Introduction While a nationwide poison control registry exists in Chile, reporting to the center is sporadic and happens at the discretion of the treating physician or by patients’ self-report. Moreover, individual hospitals do not monitor accidental or intentional poisoning in a systematic manner. The goal of this study was to identify all cases of intentional medication overdose (MO) that occurred over two years at a large public hospital in Santiago, Chile, and examine its epidemiologic profile. Methods This study is a retrospective, explicit chart review conducted at Hospital Sótero del Rio from July 2008 until June 2010. We included all cases of identified intentional MO. Alcohol and recreational drugs were included only when they were ingested with other medications. Results We identified 1,557 cases of intentional MO and analyzed a total of 1,197 cases, corresponding to 0.51% of all emergency department (ED) presentations between July 2008 and June 2010. The median patient age was 25 years. The majority was female (67.6%). Two peaks were identified, corresponding to the spring of each year sampled. The rate of hospital admission was 22.2%. Benzodiazepines, selective serotonin reuptake inhibitors, and tricyclic antidepressants (TCA) were the causative agents most commonly found, comprising 1,044 (87.2%) of all analyzed cases. Acetaminophen was involved in 81 (6.8%) cases. More than one active substance was involved in 35% of cases. In 7.3% there was ethanol co-ingestion and in 1.0% co-ingestion of some other recreational drug (primarily cocaine). Of 1,557 cases, six (0.39%) patients died. TCA were involved in two of these deaths. Conclusion Similar to other developed and developing nations, intentional MO accounts for a significant number of ED presentations in Chile. Chile is unique in the region, however, in that its spectrum of intentional overdoses includes an excess burden of tricyclic antidepressant and benzodiazepine overdoses, a relatively low rate
-
Pinho-França, José De Ribamar; Chein, Maria Bethânia Da Costa; Thuler, Luiz Claudio Santos
2016-08-12
Disparities in cancer incidence and mortality rates between regions arise due to differences in socioeconomic conditions and in human development factors. The major purpose of this study was to measure the role of the Human Development Index (HDI) in the pattern of cervical cytological abnormalities (CCAs). This was an analytical sectional study involving a review of secondary cervical cytology data collected from women living in the state of Maranhão, Brazil, in 2007-2012 and collected from the Cervical Cancer Information System (Sistema de Informação do Câncer do Colo do Útero - SISCOLO). The cervical screening results were classified according to the Brazilian Classification of Cervical Reporting (Nomenclatura Brasileira para Laudos Cervicais), an adaptation of the Bethesda System. The Municipal Human Development Index (MHDI) was used, which is an adaptation of the global HDI. The association between CCAs and MHDI was evaluated using the chi-squared test and odds ratios (ORs) with 95 % confidence intervals (95 % CI). The significance level used for all tests was 5 %. We analysed 1,363,689 examinations of women living in the state of Maranhão. CCAs were identified in 2.0 % of smears in municipalities with high MHDI, 2.2 % in those with medium or low MHDI and 4.1 % in those with very low MHDI. In addition, potentially malignant changes and suspected cervical cancer (HSIL+) were 40.0 % more frequent (0.3 %) in municipalities with medium or low MHDI and 3.6 times more frequent (0.8 %) in municipalities with very low MHDI compared to those with high MHDI (0.2 %). The association between MHDI and the occurrence of CCAs and HSIL+ shows that more developed areas with more effective health services have a lower prevalence of these lesions. To control cervical cancer, it is necessary to reduce social inequality and improve the availability of health services.
-
On efeito do achatamento nos pontos de equilíbrio e na dinâmica de sistemas coorbitais
NASA Astrophysics Data System (ADS)
Mourão, D. C.; Winter, O. C.; Yokoyama, T.
2003-08-01
Neste trabalho analisamos o efeito do achatamento do corpo principal nos pontos de equilíbrio lagrangianos e na configuração de órbitas girino-ferradura. Enfatizamos os sistemas coorbitais de satélites de Saturno, pois se encontram em relativa proximidade com o planeta, em que o efeito do achatamento se torna mais evidente. O estudo é dividido em três etapas independentes. Na primeira fase analisamos as equações de movimento do problema restrito de três corpos considerando o efeito do achatamento, e através do balanceamento de forças buscamos a nova configuração dos pontos de equilíbrio lagrangianos. Concluímos, nesta etapa, que os pontos de equilíbrio estáveis apresentam um pequeno deslocamento definido pelo parâmetro de achatamento, não podendo ser mais representados por triângulos eqüiláteros. Aplicamos este resultado aos satélites coorbitais de Tetis e Dione, encontrando as posições de equilíbrio levemente deslocadas em relação ao caso sem achatamento. Na segunda fase visamos o sistema Saturno-Jano-Epimeteu, que por se tratar de um sistema de massas comparáveis, optamos por desenvolver as equações de Yoder et al (Icarus 53, pág 431-443, 1983), que permitem determinar os pontos de equilíbrio e a amplitude de oscilação angular das órbitas girino-ferradura para o problema não-restrito de três corpos, porém, no nosso estudo consideramos o efeito do achatamento do corpo principal nestas equações. Encontramos que a distância angular entre satélites, quando em posição de equilíbrio estável, diminui quanto maior for o parâmetro de achatamento do corpo principal. Além disso, a órbita de transição girino-ferradura possui largura angular menor em relação ao caso sem achatamento. Por fim, realizamos integrações numéricas para os casos reais de coorbitais de Saturno comparando com os resultados analíticos. Nestas integrações simulamos diversas órbitas girino-ferradura com diferentes parâmetros de achatamento
-
NASA Astrophysics Data System (ADS)
Afonin, Nikita; Kozlovskaya, Elena
2016-04-01
the SPGF corresponds to a narrow region of low S-wave velocities surrounded by rocks with high S-wave velocities. We interpret this low velocity region as a non-healed mechanically weak fault damage zone (FDZ) remained after the last major earthquake that occurred after the last glaciation. Seismic instruments for the DAFNE/FINLAND experiment were provided by the institute of Seismology of the University of Helsinki and by the Sodankylä Geophysical Observatory. The study was partly funded by Posiva Oy and Geological Survey of Finland. DAFNE/FINLAND Working Group: Ilmo Kukkonen Pekka Heikkinen Kari Komminaho Elena Kozlovskaya Riitta Hurskainen Tero Raita Hanna Silvennoinen
-
NASA Astrophysics Data System (ADS)
Wagner, Christiane; Orberger, Beate; Tudryn, Alina; Baptiste, Benoît; Wirth, Richard; Morgan, Rachel; Miska, Serge
2016-04-01
In low-grade banded iron formations (BIFs), a large part of the iron is related to micro- and nano- metric iron-bearing inclusions within quartz and/or carbonates, mainly dolomite (~ 20 to 50 μm). Low-grade fine grained iron ore present two types of environmental risks: a) they are often stocked as tailings. For example, the recent disaster (5th of November 2015) in the Minas Gerais district, Brazil, was caused by the collapse of the Fundão tailings dam at an open cast mine; b) during beneficiation significant amounts of dust are generated also leading to metal loss. A laminated BIF studied from a drill core at Àguas Claras Mine, Quadrilátero Ferrífero, Brazil, contains 26.71 wt. % total iron, 0.2 wt. % SiO2, 0.32 wt.% MnO, 15.46 wt. % MgO, 22.32 wt.% CaO, 0.09 wt. % P2O5, < 0.05 wt. % Al2O3, 0.15 wt. % H2O and 34.08 wt. % CO2. Environmental hazardous elements are present as traces (As: 3-20 ppm, Cd: 0-0.7 ppm; Cr: 0.05-60 ppm, Pb: up to 55 ppm; U: up to 8 ppm). Dolomite and quartz bands alternate with hematite bands. Raman spectroscopy, X-ray diffraction and FIB-TEM analyses reveal that the micro- and nano- metric inclusions in dolomite are hematite and minor goethite, partly occurring as clusters in voids. Curie Balance analyses were carried out at different heating steps and temperatures on whole rock samples and a synthetic mix of decarbonated sample and pure dolomite. X-ray diffraction on the products of the heating experiments shows that that hematite is stable and new phases: magnesioferrite (MgFe2O4), lime (CaO), periclase (MgO), portlandite (Ca(OH)2) and srebrodoskite (Ca2Fe2O5) were formed between 680 °C and 920 °C. These findings promote the economic use of low grade ores rather than their stockpiling as tailings. The presence of OH-bearing goethite reduces the sintering temperature. After having separated coarse hematite from barren dolomite and quartz, a low temperature sintering of the inclusion-bearing dolomite/quartz leads to transformations
-
Välimäki, Maritta; Kannisto, Kati Anneli; Vahlberg, Tero; Hätönen, Heli; Adams, Clive E
2017-07-12
data can provide clear outcomes for pragmatic randomized trials. SMS messaging tailored with the input of each individual patient did not decrease the rate of psychiatric hospital visits after the 12 months of follow-up. Although there may have been other, more subtle effects, the results of these were not evident in outcomes of agreed importance to clinicians, policymakers, and patients and their families. International Standard Randomized Controlled Trial Number (ISRCTN): 27704027; http://www.isrctn.com/ISRCTN27704027 (Archived by WebCite at http://www.webcitation.org/6rVzZrbuz). ©Maritta Välimäki, Kati Anneli Kannisto, Tero Vahlberg, Heli Hätönen, Clive E Adams. Originally published in the Journal of Medical Internet Research (http://www.jmir.org), 12.07.2017.
-
Identifying knickpoints using elevation breaks and offsets in slope-area scaling
NASA Astrophysics Data System (ADS)
Peifer Bezerra, Daniel; Persano, Cristina
2017-04-01
passive margin river system, the Quadrilátero Ferrífero - Brazil, that exhibits (i) high relief (max. relief is 1400 m, max. elevation is 2080 m); (ii) presence of knickpoints; (iii) an absence of Quaternary glaciation. Therefore, we seek to test the different methods of identification of knickpoints in a mountainous landscape where we had field constraints of knickpoints. There are two main criteria for the identification of knickpoints: (1) elevation/gradient breaks or; (2) offsets in trends of slope-area scaling. Both of those criteria are somehow subjective as the values for the breaks in (1) as well as the regression limits for the slope-area scaling (2) are arbitrary. We show that the use of those different criteria prescribes different results; the knickpoints identified for both methods are not interchangeable. The method (1) define a higher number of knickpoints than (2) that are more easily identified in the field than the knickpoints that stem from (2). Many times the knickpoints identified from (1) are subsequent, meaning that they are a knickzone rather than a knickpoint. The method (2) is more robust for the characterization of knickzones than (1). We suggest a combined approach for the identification of knickpoints as well as arbitrary values for defining it.
-
Jiménez, Elisa; Valls, Nicolás; Astudillo, Patricio; Valls, Cristian; Cavada, Gabriel; Sandoval, Alejandra; Alegría, Angélica; Ortega, Gabriela; Núñez, Daniela; Mena, Patricia
2017-12-01
Antibiotics (ATB) are drugs widely used in hospitalized newborns. The indiscriminate use of ATBs promote the rise of resistant bacteria to the most commonly indicated antimicrobials. In addition, ATB prescription presents associations to morbidity, such as bronchopulmonary dysplasia, necrotizing enterocolitis, late sepsis and even death. All of the above leads to an increase in health care costs. To record and to evaluate trends of antibiotic use over time in hospitalized NB in the Neonatology Unit at Dr. Sótero del Río Hospital, in order to objectify the changes in the usual practice of the ATM indication. A secondary objective was to assess its impact on antimicrobial resistance. Cohort, observational, prospective unicenter study which included all hospitalized patients between January 2011 and December 2014. Birth weight, hospitalization days, ATB indication and days of ATB use were recorded for each patient. The use of ATB was quantified by means of different rates; days of indication of one or more ATBs for global consumption (RUA), total sum of days of use (TSUA) and for the most frequently used ATBs. Each calculated rate for 100 days hospitalized. In addition, the antimicrobial susceptibility of the most frequently isolated bacteria in our service: coagulase-negative Staphylococcus (SCN) and Gram-negative bacilli (BGN) were recorded continuously. The 34.7% of the hospitalized patients received some type of antimicrobial agent. ATBs were 32.3% of medicines used. The most widely used was ampicillin (with 20.2% of the total) and cefadroxyl (with 11.6%). The RUA did not change during the study time, but STUA decreased by 10.7% between 2011 and 2014 with p < 0.05. When subgroup analyzes were divided by weight ranges, in the < 750 g group, the use of vancomycin decreased in use by 9.9% and an increase of 18.8% for metronidazole was observed. On the other hand, there was an increase in the use of the piperacillin-tazobactam regimen in the range > 1,500 g. When
-
Pietilä, Julia; Helander, Elina; Korhonen, Ilkka; Myllymäki, Tero; Kujala, Urho M; Lindholm, Harri
2018-03-16
intraindividual effects of alcohol intake on the ANS regulation were observed also with low alcohol intake (all P<.001). For example, HRV-derived physiological recovery state decreased on average by 9.3, 24.0, and 39.2 percentage units with low, moderate, and high alcohol intake, respectively. The effects of alcohol in suppressing recovery were similar for both genders and for physically active and sedentary subjects but stronger among young than older subjects and for participants with lower baseline sleep HR than with higher baseline sleep HR. Alcohol intake disturbs cardiovascular relaxation during sleep in a dose-dependent manner in both genders. Regular PA or young age do not protect from these effects of alcohol. In health promotion, wearable HR monitoring and HRV-based analysis of recovery might be used to demonstrate the effects of alcohol on sleep on an individual level. ©Julia Pietilä, Elina Helander, Ilkka Korhonen, Tero Myllymäki, Urho M Kujala, Harri Lindholm. Originally published in JMIR Mental Health (http://mental.jmir.org), 16.03.2018.
-
Kannisto, Kati Anneli; Korhonen, Joonas; Adams, Clive E; Koivunen, Marita Hannele; Vahlberg, Tero; Välimäki, Maritta Anneli
2017-02-21
.12% (35/1123) of the participants withdrew from the trial. However, dropout rates from the patient survey (either by paper or telephone interview) were 52.45% (589/1123) and 27.8% (155/558), respectively. Almost all participants (536/563, 95.2%) tolerated the intervention, but those who discontinued were more often women (21/27, 78%; P=.009). Finally, participants' age (P<.001), gender (P<.001), vocational education (P=.04), and employment status (P<.001) seemed to predict their risk of dropping out from the postal survey. Patient recruitment and engagement in the 12-month follow-up conducted with a postal survey were the most vulnerable phases in the SMS text message-based trial. People with serious mental health problems may need extra support during the recruitment process and in engaging them in SMS text message-based trials to ensure robust enough evidence for mental health care. International Standard Randomized Controlled Trial Number (ISRCTN): 27704027; http://www.isrctn.com/ISRCTN27704027 (Archived by WebCite at http://www.webcitation.org/6oHcU2SFp). ©Kati Anneli Kannisto, Joonas Korhonen, Clive E Adams, Marita Hannele Koivunen, Tero Vahlberg, Maritta Anneli Välimäki. Originally published in the Journal of Medical Internet Research (http://www.jmir.org), 21.02.2017.
-
NASA Astrophysics Data System (ADS)
Angerer, Thomas; Hagemann, Steffen G.; Danyushevsky, Leonid
2013-08-01
, carbonate and quartz to form veins and breccia but did not generate significant volumes of iron ore. Ore stage 4 involved Mesozoic(?) to recent supergene oxidation and hydration in a weathering environment reaching down to depths of ˜100 to maximum 200 m below surface. Supergene ore formation involved goethite replacement of dolomite and quartz as well as martitisation. Important `ground preparation' for supergene modification and upgrade were mainly the formation of steep D1 to D4 structures, steep BIF/basalt margins and particularly the syn-D1 to syn-D2 carbonate alteration of BIF that is most susceptible to supergene dissolution. The Windarling deposits are structurally controlled, supergene-modified hydrothermal iron ore systems that share comparable physical, chemical and ore-forming characteristics to other iron ore deposits in the Yilgarn Craton (e.g. Koolyanobbing, Beebyn in the Weld Range, Mt. Gibson). However, the remarkable variety in pre-, syn- and post-deformational ore textures (relative to D1 and D2) has not been described elsewhere in the Yilgarn and are similar to the ore deposits in high-strain zones, such as of Brazil (Quadrilátero Ferrífero or Iron Quadrangle) and Nigeria. The overall similarity of alteration stages, i.e. the sequence of hydrothermal carbonate introduction and hypogene leaching, with other greenstone belt-hosted iron ore deposits supports the interpretation that syn-orogenic BIF alteration and upgrade was crucial in the formation of hypogene-supergene iron ore deposits in the Yilgarn Craton and possibly in other Archean/Paleoproterozoic greenstone belt settings worldwide.