First transmission of electrons and ions through the KATRIN beamline

NASA Astrophysics Data System (ADS)

Arenz, M.; Baek, W.-J.; Beck, M.; Beglarian, A.; Behrens, J.; Bergmann, T.; Berlev, A.; Besserer, U.; Blaum, K.; Bode, T.; Bornschein, B.; Bornschein, L.; Brunst, T.; Buzinsky, N.; Chilingaryan, S.; Choi, W. Q.; Deffert, M.; Doe, P. J.; Dragoun, O.; Drexlin, G.; Dyba, S.; Edzards, F.; Eitel, K.; Ellinger, E.; Engel, R.; Enomoto, S.; Erhard, M.; Eversheim, D.; Fedkevych, M.; Fischer, S.; Formaggio, J. A.; Fränkle, F. M.; Franklin, G. B.; Friedel, F.; Fulst, A.; Gil, W.; Glück, F.; Gonzalez Ureña, A.; Grohmann, S.; Grössle, R.; Gumbsheimer, R.; Hackenjos, M.; Hannen, V.; Harms, F.; Haußmann, N.; Heizmann, F.; Helbing, K.; Herz, W.; Hickford, S.; Hilk, D.; Hillesheimer, D.; Howe, M. A.; Huber, A.; Jansen, A.; Kellerer, J.; Kernert, N.; Kippenbrock, L.; Kleesiek, M.; Klein, M.; Kopmann, A.; Korzeczek, M.; Kovalík, A.; Krasch, B.; Kraus, M.; Kuckert, L.; Lasserre, T.; Lebeda, O.; Letnev, J.; Lokhov, A.; Machatschek, M.; Marsteller, A.; Martin, E. L.; Mertens, S.; Mirz, S.; Monreal, B.; Naumann, U.; Neumann, H.; Niemes, S.; Off, A.; Ortjohann, H.-W.; Osipowicz, A.; Otten, E.; Parno, D. S.; Pollithy, A.; Poon, A. W. P.; Priester, F.; Ranitzsch, P. C.-O.; Rest, O.; Robertson, R. G. H.; Roccati, F.; Rodenbeck, C.; Röllig, M.; Röttele, C.; Ryšavý, M.; Sack, R.; Saenz, A.; Schimpf, L.; Schlösser, K.; Schlösser, M.; Schönung, K.; Schrank, M.; Seitz-Moskaliuk, H.; Sentkerestiová, J.; Sibille, V.; Slezák, M.; Steidl, M.; Steinbrink, N.; Sturm, M.; Suchopar, M.; Suesser, M.; Telle, H. H.; Thorne, L. A.; Thümmler, T.; Titov, N.; Tkachev, I.; Trost, N.; Valerius, K.; Vénos, D.; Vianden, R.; Vizcaya Hernández, A. P.; Weber, M.; Weinheimer, C.; Weiss, C.; Welte, S.; Wendel, J.; Wilkerson, J. F.; Wolf, J.; Wüstling, S.; Zadoroghny, S.

2018-04-01

The Karlsruhe Tritium Neutrino (KATRIN) experiment is a large-scale effort to probe the absolute neutrino mass scale with a sensitivity of 0.2 eV (90% confidence level), via a precise measurement of the endpoint spectrum of tritium β-decay. This work documents several KATRIN commissioning milestones: the complete assembly of the experimental beamline, the successful transmission of electrons from three sources through the beamline to the primary detector, and tests of ion transport and retention. In the First Light commissioning campaign of autumn 2016, photoelectrons were generated at the rear wall and ions were created by a dedicated ion source attached to the rear section; in July 2017, gaseous 83mKr was injected into the KATRIN source section, and a condensed 83mKr source was deployed in the transport section. In this paper we describe the technical details of the apparatus and the configuration for each measurement, and give first results on source and system performance. We have successfully achieved transmission from all four sources, established system stability, and characterized many aspects of the apparatus.

Permanent Monitoring of the Reference Point of the 20m Radio Telescope Wettzell

NASA Technical Reports Server (NTRS)

Neidhardt, Alexander; Losler, Michael; Eschelbach, Cornelia; Schenk, Andreas

2010-01-01

To achieve the goals of the VLBI2010 project and the Global Geodetic Observing System (GGOS), an automated monitoring of the reference points of the various geodetic space techniques, including Very Long Baseline Interferometry (VLBI), is desirable. The resulting permanent monitoring of the local-tie vectors at co-location stations is essential to obtain the sub-millimeter level in the combinations. For this reason a monitoring system was installed at the Geodetic Observatory Wettzell by the Geodetic Institute of the University of Karlsruhe (GIK) to observe the 20m VLBI radio telescope from May to August 2009. A specially developed software from GIK collected data from automated total station measurements, meteorological sensors, and sensors in the telescope monument (e.g., Invar cable data). A real-time visualization directly offered a live view of the measurements during the regular observation operations. Additional scintillometer measurements allowed refraction corrections during the post-processing. This project is one of the first feasibility studies aimed at determining significant deformations of the VLBI antenna due to, for instance, changes in temperature.

Bioactivity of essential oil from lemongrass (Cymbopogon citratus Stapf) as antioxidant agent

NASA Astrophysics Data System (ADS)

Anggraeni, Nenden Indrayati; Hidayat, Ika Wiani; Rachman, Saadah Diana; Ersanda

2018-02-01

Free radical induced oxidative stress that influences the occurrence of various degenerative diseases such as cancer, coronary heart disease and premature aging. In the case that body's antioxidant defense system does not have excessive antioxidants, additional natural antioxidant via food or other nutrients intake is needed. Stems of lemongrass Cymbopogon citratus Stapf are known to contain phenolic compounds that are known to have antioxidant activity. Lemongrass (Cymbopogon citratus Stapf) plant is well known herb in Asia, espesially in Indonesia and used for cooking and has many health benefits. A study has been carried out to determine antioxidant potential of stems of lemongrass. In this the primary study is to examine essential oil Cymbopogon citratus Stapf from Cileles Jatinangor as an antioxidant agent. Essential oil of Cymbopogon citratus Stapf was isolated from 1272 g of dried stem by using Karlsruhe steam distillation methods with 0.24% in yield. The product of essential oil was also tested against antioxidant activity DPPH and resulted low activity compare to ascorbic acid and lemongrass oil standard as reference material.

On the Temporal Stability of Analyte Recognition with an E-Nose Based on a Metal Oxide Sensor Array in Practical Applications

PubMed Central

Kaikov, Igor; Koronczi, Ilona; Adil Akai Tegin, Ruslan; Smanalieva, Jamila; Sommer, Martin; Ilicali, Coskan; Hauptmannl, Michael

2018-01-01

The paper deals with a functional instability of electronic nose (e-nose) units which significantly limits their real-life applications. Here we demonstrate how to approach this issue with example of an e-nose based on a metal oxide sensor array developed at the Karlsruhe Institute of Technology (Germany). We consider the instability of e-nose operation at different time scales ranging from minutes to many years. To test the e-nose we employ open-air and headspace sampling of analyte odors. The multivariate recognition algorithm to process the multisensor array signals is based on the linear discriminant analysis method. Accounting for the received results, we argue that the stability of device operation is mostly affected by accidental changes in the ambient air composition. To overcome instabilities, we introduce the add-training procedure which is found to successfully manage both the temporal changes of ambient and the drift of multisensor array properties, even long-term. The method can be easily implemented in practical applications of e-noses and improve prospects for device marketing. PMID:29439468

PREFACE Preface

NASA Astrophysics Data System (ADS)

Ronning, Filip; Batista, Cristian

2011-01-01

Preface The 2010 International Conference on Strongly Correlated Electron Systems was held in Santa Fe, New Mexico, a reunion of sorts of the 1989 International Conference on the Physics of Highly Correlated Electron Systems that also convened in Santa Fe. SCES 2010 - co-chaired by John Sarrao and Joe Thompson - followed the tradition of earlier conferences in this century, hosted by Buzios ('08), Houston ('07), Vienna ('05), Karlsruhe ('04), Krakow ('02) and Ann Arbor ('01). Every three years since 1997, SCES has joined the International Conference on Magnetism (ICM), held in Recife ('00), Rome ('03), Kyoto ('06) and Karlsruhe ('09). Like its predecessors, SCES 2010 topics included strongly correlated f- and d-electron systems, heavy-fermion behaviors, quantum-phase transitions, non-Fermi liquid phenomena, unconventional superconductivity, and emergent states that arise from electronic correlations. Recent developments from studies of quantum magnetism and cold atoms complemented the traditional subjects and were included in SCES 2010. 2010 celebrated the 400th anniversary of Santa Fe as well as the birth of astronomy. So what is the connection to SCES? The Dutch invention of the first practical telescope and its use by Galileo in 1610 and subsequent years overturned the dogma that the sun revolved about the earth. This revolutionary, and at the time heretical, conclusion required innovative combinations of new instrumentation, observation and mathematics. These same combinations are just as important 400 years later and are the foundation of scientific discoveries that were discussed during SCES 2010. As we learned, past dogmas about strongly correlated materials and phenomena must be re-examined with an open and inquisitive mind. A glimpse at the excitement this conference had to offer can be seen in the SCES 2010 proceedings, which are published simultaneously by the Institute of Physics Publishing in issues of the Journal of Physics: Conference Series

Partitioned fluid-solid coupling for cardiovascular blood flow: left-ventricular fluid mechanics.

PubMed

Krittian, Sebastian; Janoske, Uwe; Oertel, Herbert; Böhlke, Thomas

2010-04-01

We present a 3D code-coupling approach which has been specialized towards cardiovascular blood flow. For the first time, the prescribed geometry movement of the cardiovascular flow model KaHMo (Karlsruhe Heart Model) has been replaced by a myocardial composite model. Deformation is driven by fluid forces and myocardial response, i.e., both its contractile and constitutive behavior. Whereas the arbitrary Lagrangian-Eulerian formulation (ALE) of the Navier-Stokes equations is discretized by finite volumes (FVM), the solid mechanical finite elasticity equations are discretized by a finite element (FEM) approach. Taking advantage of specialized numerical solution strategies for non-matching fluid and solid domain meshes, an iterative data-exchange guarantees the interface equilibrium of the underlying governing equations. The focus of this work is on left-ventricular fluid-structure interaction based on patient-specific magnetic resonance imaging datasets. Multi-physical phenomena are described by temporal visualization and characteristic FSI numbers. The results gained show flow patterns that are in good agreement with previous observations. A deeper understanding of cavity deformation, blood flow, and their vital interaction can help to improve surgical treatment and clinical therapy planning.

Using portfolio assignment to support students individually and sustainably -There's always a first time

NASA Astrophysics Data System (ADS)

Mayer, M.

2009-04-01

The recent education of engineers, using the example of satellite geodesy at the Geodetic Institute of the University Karlsruhe (GIK, Germany), is still suffering from time pressure as well as from heavy curriculum content loading. Within this education students, where the academic teachers have to fulfill high requests from the new generation of students as well as from industry and from research institutions respectively, advanced satellite geodetic knowledge has to be transferred effectively and sustainably. In order to enable the students to train newest aspects related to satellite geodesy as well as important key competences, e.g. capacity for independent and academic work, reflection and evaluation skills, presentation skills, an innovative teaching concept was developed, tested, and evaluated. This teaching concept makes use of very different teaching techniques like portfolio assignment, project work, input from experts, jig saw, advance and post organizer. This presentation will focus on the portfolio assignment component. This teaching technique was used at the GIK during the last two years for the first time, in order to support students individually. The lessons learnt within this teaching experiment are going to be presented.

Experimental and numerical simulation of passive decay heat removal by sump cooling after cool melt down

DOE Office of Scientific and Technical Information (OSTI.GOV)

Knebel, J.U.; Kuhn, D.; Mueller, U.

1997-12-01

This article presents the basic physical phenomena and scaling criteria of passive decay heat removal from a large coolant pool by single-phase and two-phase natural circulation. The physical significance of the dimensionless similarity groups derived is evaluated. The above results are applied to the SUCO program that is performed at the Forschungszentrum Karlsruhe. The SUCO program is a three-step series of scaled model experiments investigating the possibility of a sump cooling concept for future light water reactors. The sump cooling concept is based on passive safety features within the containment. The work is supported by the German utilities and themore » Siemens AG. The article gives results of temperature and velocity measurements in the 1:20 linearly scaled SUCOS-2D test facility. The experiments are backed up by numerical calculations using the commercial software package Fluent. Finally, using the similarity analysis from above, the experimental results of the model geometry are scaled-up to the conditions in the prototype, allowing a first statement with regard to the feasibility of the sump cooling concept. 11 refs., 9 figs., 3 tabs.« less

Ground Motion Relations While TBM Drilling in Unconsolidated Sediments

NASA Astrophysics Data System (ADS)

Grund, Michael; Ritter, Joachim R. R.; Gehrig, Manuel

2016-05-01

The induced ground motions due to the tunnel boring machine (TBM), which has been used for the drilling of the urban metro tunnel in Karlsruhe (SW Germany), has been studied using the continuous recordings of seven seismological monitoring stations. The drilling has been undertaken in unconsolidated sediments of the Rhine River system, relatively close to the surface at 6-20 m depth and in the vicinity of many historic buildings. Compared to the reference values of DIN 4150-3 (1-80 Hz), no exceedance of the recommended peak ground velocity (PGV) limits (3-5 mm/s) was observed at the single recording site locations on building basements during the observation period between October 2014 and February 2015. Detailed analyses in the time and frequency domains helped with the detection of the sources of several specific shaking signals in the recorded time series and with the comparison of the aforementioned TBM-induced signals. The amplitude analysis allowed for the determination of a PGV attenuation relation (quality factor Q ~ 30-50) and the comparison of the TBM-induced ground motion with other artificially induced and natural ground motions of similar amplitudes.

Semi-Technical Cryogenic Molecular Sieve Bed for the Tritium Extraction System of the Test Blanket Module for ITER

DOE Office of Scientific and Technical Information (OSTI.GOV)

Beloglazov, S.; Bekris, N.; Glugla, M.

2005-07-15

The tritium extraction from the ITER Helium Cooled Pebble Bed (HCPB) Test Blanket Module purge gas is proposed to be performed in a two steps process: trapping water in a cryogenic Cold Trap, and adsorption of hydrogen isotopes (H{sub 2}, HT, T{sub 2}) as well as impurities (N{sub 2}, O{sub 2}) in a Cryogenic Molecular Sieve Bed (CMSB) at 77K. A CMSB in a semi-technical scale (one-sixth of the flow rate of the ITER-HCPB) was design and constructed at the Forschungszentrum Karlsruhe. The full capacity of CMSB filled with 20 kg of MS-5A was calculated based on adsorption isotherm datamore » to be 9.4 mol of H{sub 2} at partial pressure 120 Pa. The breakthrough tests at flow rates up to 2 Nm{sup 3}h{sup -1} of He with 110 Pa of H{sub 2} conformed with good agreement the adsorption capacity of the CMSB. The mass-transfer zone was found to be relatively narrow (12.5 % of the MS Bed height) allowing to scale up the CMSB to ITER flow rates.« less

Capture and isotopic exchange method for water and hydrogen isotopes on zeolite catalysts up to technical scale for pre-study of processing highly tritiated water

DOE Office of Scientific and Technical Information (OSTI.GOV)

Michling, R.; Braun, A.; Cristescu, I.

2015-03-15

Highly tritiated water (HTW) may be generated at ITER by various processes and, due to the excessive radio toxicity, the self-radiolysis and the exceedingly corrosive property of HTW, a potential hazard is associated with its storage and process. Therefore, the capture and exchange method for HTW utilizing Molecular Sieve Beds (MSB) was investigated in view of adsorption capacity, isotopic exchange performance and process parameters. For the MSB, different types of zeolite were selected. All zeolite materials were additionally coated with platinum. The following work comprised the selection of the most efficient zeolite candidate based on detailed parametric studies during themore » H{sub 2}/D{sub 2}O laboratory scale exchange experiments (about 25 g zeolite per bed) at the Tritium Laboratory Karlsruhe (TLK). For the zeolite, characterization analytical techniques such as Infrared Spectroscopy, Thermogravimetry and online mass spectrometry were implemented. Followed by further investigation of the selected zeolite catalyst under full technical operation, a MSB (about 22 kg zeolite) was processed with hydrogen flow rates up to 60 mol*h{sup -1} and deuterated water loads up to 1.6 kg in view of later ITER processing of arising HTW. (authors)« less

Lateral distribution of the radio signal in extensive air showers measured with LOPES

NASA Astrophysics Data System (ADS)

Apel, W. D.; Arteaga, J. C.; Asch, T.; Badea, A. F.; Bähren, L.; Bekk, K.; Bertaina, M.; Biermann, P. L.; Blümer, J.; Bozdog, H.; Brancus, I. M.; Brüggemann, M.; Buchholz, P.; Buitink, S.; Cantoni, E.; Chiavassa, A.; Cossavella, F.; Daumiller, K.; de Souza, V.; di Pierro, F.; Doll, P.; Engel, R.; Falcke, H.; Finger, M.; Fuhrmann, D.; Gemmeke, H.; Ghia, P. L.; Glasstetter, R.; Grupen, C.; Haungs, A.; Heck, D.; Hörandel, J. R.; Horneffer, A.; Huege, T.; Isar, P. G.; Kampert, K.-H.; Kang, D.; Kickelbick, D.; Krömer, O.; Kuijpers, J.; Lafebre, S.; Łuczak, P.; Ludwig, M.; Mathes, H. J.; Mayer, H. J.; Melissas, M.; Mitrica, B.; Morello, C.; Navarra, G.; Nehls, S.; Nigl, A.; Oehlschläger, J.; Over, S.; Palmieri, N.; Petcu, M.; Pierog, T.; Rautenberg, J.; Rebel, H.; Roth, M.; Saftoiu, A.; Schieler, H.; Schmidt, A.; Schröder, F.; Sima, O.; Singh, K.; Toma, G.; Trinchero, G. C.; Ulrich, H.; Weindl, A.; Wochele, J.; Wommer, M.; Zabierowski, J.; Zensus, J. A.; LOPES Collaboration

2010-01-01

The antenna array LOPES is set up at the location of the KASCADE-Grande extensive air shower experiment in Karlsruhe, Germany and aims to measure and investigate radio pulses from extensive air showers. The coincident measurements allow us to reconstruct the electric field strength at observation level in dependence of general EAS parameters. In the present work, the lateral distribution of the radio signal in air showers is studied in detail. It is found that the lateral distributions of the electric field strengths in individual EAS can be described by an exponential function. For about 20% of the events a flattening towards the shower axis is observed, preferentially for showers with large inclination angle. The estimated scale parameters R0, describing the slope of the lateral profiles range between 100 and 200 m. No evidence for a direct correlation of R0 with shower parameters like azimuth angle, geomagnetic angle, or primary energy can be found. This indicates that the lateral profile is an intrinsic property of the radio emission during the shower development which makes the radio detection technique suitable for large scale applications.

The cosmic ray energy spectrum in the range 1016-1018 eV measured by KASCADE-Grande

NASA Astrophysics Data System (ADS)

Bertaina, M.; Apel, W. D.; Arteaga-Velázquez, J. C.; Bekk, K.; Blümer, J.; Bozdog, H.; Brancus, I. M.; Buchholz, P.; Cantoni, E.; Chiavassa, A.; Cossavella, F.; Daumiller, K.; de Souza, V.; di Pierro, F.; Doll, P.; Engel, R.; Engler, J.; Finger, M.; Fuhrmann, D.; Ghia, P. L.; Gils, H. J.; Glasstetter, R.; Grupen, C.; Haungs, A.; Heck, D.; Hörandel, J. R.; Huege, T.; Isar, P. G.; Kampert, K.-H.; Kang, D.; Kickelbick, D.; Klages, H. O.; Link, K.; Łuczak, P.; Ludwig, M.; Mathes, H. J.; Mayer, H. J.; Melissas, M.; Milke, J.; Mitrica, B.; Morello, C.; Navarra, G.; Nehls, S.; Oehlschläger, J.; Ostapchenko, S.; Over, S.; Palmieri, N.; Petcu, M.; Pierog, T.; Rebel, H.; Roth, M.; Schieler, H.; Schröder, F.; Sima, O.; Toma, G.; Trinchero, G. C.; Ulrich, H.; Weindl, A.; Wochele, J.; Wommer, M.; Zabierowski, J.

2011-06-01

The KASCADE-Grande experiment, located at Campus North of the Karlsruhe Institute of Technology (Germany) is a multi-component extensive air-shower experiment devoted to the study of cosmic rays and their interactions at primary energies 1014-1018 eV. One of the main goals of the experiment is the measurement of the all particle energy spectrum in the 1016-1018 eV range, i.e. extending the range accessible by KASCADE alone. The Grande detector samples the charged component (Nch) of the air shower while the original KASCADE array provides in addition a measurement of the muon component (Nμ). The combined information of Nch and Nμ is used to estimate the energy on an event-by-event basis and to derive the all-particle energy spectrum. Since the calibration of the observables in terms of the primary energy depends on Monte Carlo simulations, three different methods with partially different sources of uncertainties, have been considered and compared to each other to derive the systematics on the energy spectrum. The different methods employed to derive the spectrum and their uncertainties, as well as the implications of the obtained result, are discussed in detail.

LOPES — Recent Results and Open Questions on the Radio Detection of Air Showers

NASA Astrophysics Data System (ADS)

Schröder, F. G.; Apel, W. D.; Arteaga-Velázquez, J. C.; Bähren, L.; Bekk, K.; Bertaina, M.; Biermann, P. L.; Blümer, J.; Bozdog, H.; Brancus, I. M.; Cantoni, E.; Chiavassa, A.; Daumiller, K.; de Souza, V.; Di Pierro, F.; Doll, P.; Engel, R.; Falcke, H.; Fuchs, B.; Gemmeke, H.; Grupen, C.; Haungs, A.; Heck, D.; Hörandel, J. R.; Horneffer, A.; Huber, D.; Huege, T.; Isar, P. G.; Kampert, K.-H.; Kang, D.; Krömer, O.; Kuijpers, J.; Link, K.; Łuczak, P.; Ludwig, M.; Mathes, H. J.; Melissas, M.; Morello, C.; Oehlschläger, J.; Palmieri, N.; Pierog, T.; Rautenberg, J.; Rebel, H.; Roth, M.; Rühle, C.; Saftoiu, A.; Schieler, H.; Schmidt, A.; Schoo, S.; Sima, O.; Toma, G.; Trinchero, G. C.; Weindl, A.; Wochele, J.; Zabierowski, J.; Zensus, J. A.

2015-08-01

LOPES was a digital antenna array operating for approximately 10 years until spring 2013 at the Karlsruhe Institute of Technology (KIT). Triggered by the co-located KASCADE-Grande air-shower experiment, it measured the radio signal of around 1000 cosmic-ray air showers with energies E ≳ 1017 eV in an effective band of 43 - 74 MHz. Using the interferometric technique of cross-correlation beamforming, LOPES could reconstruct the shower direction with an accuracy < 0.7°, the shower energy with a precision < 20%, and the atmospheric depth of the shower maximum, Xmax, with a precision < 95g/cm2. In particular the reconstruction of the shower maximum suffers from significant measurement uncertainties due to the radio-loud environment of the site. This article summarizes our latest results on the reconstruction of the shower maximum, using two independent methods: the steepness of the hyperbolic radio wavefront and the slope of the lateral distribution of the radio amplitude. Moreover, we show vectorial measurements of the electric field with the tripole antennas of the latest LOPES setup. Finally, we discuss open questions as well as the potential impact of the lessons learned at LOPES for future antenna arrays.

Air oxidation of Zircaloy-4 in the 600-1000 °C temperature range: Modeling for ASTEC code application

NASA Astrophysics Data System (ADS)

Coindreau, O.; Duriez, C.; Ederli, S.

2010-10-01

Progress in the treatment of air oxidation of zirconium in severe accident (SA) codes are required for a reliable analysis of severe accidents involving air ingress. Air oxidation of zirconium can actually lead to accelerated core degradation and increased fission product release, especially for the highly-radiotoxic ruthenium. This paper presents a model to simulate air oxidation kinetics of Zircaloy-4 in the 600-1000 °C temperature range. It is based on available experimental data, including separate-effect experiments performed at IRSN and at Forschungszentrum Karlsruhe. The kinetic transition, named "breakaway", from a diffusion-controlled regime to an accelerated oxidation is taken into account in the modeling via a critical mass gain parameter. The progressive propagation of the locally initiated breakaway is modeled by a linear increase in oxidation rate with time. Finally, when breakaway propagation is completed, the oxidation rate stabilizes and the kinetics is modeled by a linear law. This new modeling is integrated in the severe accident code ASTEC, jointly developed by IRSN and GRS. Model predictions and experimental data from thermogravimetric results show good agreement for different air flow rates and for slow temperature transient conditions.

Recovery of actinides from actinide-aluminium alloys by chlorination: Part III - Chlorination with HCl(g)

NASA Astrophysics Data System (ADS)

Meier, Roland; Souček, Pavel; Walter, Olaf; Malmbeck, Rikard; Rodrigues, Alcide; Glatz, Jean-Paul; Fanghänel, Thomas

2018-01-01

Two steps of a pyrochemical route for the recovery of actinides from spent metallic nuclear fuel are being investigated at JRC-Karlsruhe. The first step consists in electrorefining the fuel in molten salt medium implying aluminium cathodes. The second step is a chlorination process for the separation of actinides (An) from An-Al alloys formed on the cathodes. The chlorination process, in turn, consists of three steps; the distillation of adhered salt (1), the chlorination of An-Al by HCl/Cl2 under formation of AlCl3 and An chlorides (2), and the subsequent sublimation of AlCl3 (3). In the present work UAl2, UAl3, NpAl2, and PuAl2 were chlorinated with HCl(g) in a temperature range between 300 and 400 °C forming UCl4, NpCl4 or PuCl3 as the major An containing phases, respectively. Thermodynamic calculations were carried out to support the experimental work. The results showed a high chlorination efficiency for all used starting materials and indicated that the sublimation step may not be necessary when using HCl(g).

keV-Scale sterile neutrino sensitivity estimation with time-of-flight spectroscopy in KATRIN using self-consistent approximate Monte Carlo

NASA Astrophysics Data System (ADS)

Steinbrink, Nicholas M. N.; Behrens, Jan D.; Mertens, Susanne; Ranitzsch, Philipp C.-O.; Weinheimer, Christian

2018-03-01

We investigate the sensitivity of the Karlsruhe Tritium Neutrino Experiment (KATRIN) to keV-scale sterile neutrinos, which are promising dark matter candidates. Since the active-sterile mixing would lead to a second component in the tritium β-spectrum with a weak relative intensity of order sin ^2θ ≲ 10^{-6}, additional experimental strategies are required to extract this small signature and to eliminate systematics. A possible strategy is to run the experiment in an alternative time-of-flight (TOF) mode, yielding differential TOF spectra in contrast to the integrating standard mode. In order to estimate the sensitivity from a reduced sample size, a new analysis method, called self-consistent approximate Monte Carlo (SCAMC), has been developed. The simulations show that an ideal TOF mode would be able to achieve a statistical sensitivity of sin ^2θ ˜ 5 × 10^{-9} at one σ , improving the standard mode by approximately a factor two. This relative benefit grows significantly if additional exemplary systematics are considered. A possible implementation of the TOF mode with existing hardware, called gated filtering, is investigated, which, however, comes at the price of a reduced average signal rate.

Methodology and application of high performance electrostatic field simulation in the KATRIN experiment

NASA Astrophysics Data System (ADS)

Corona, Thomas

The Karlsruhe Tritium Neutrino (KATRIN) experiment is a tritium beta decay experiment designed to make a direct, model independent measurement of the electron neutrino mass. The experimental apparatus employs strong ( O[T]) magnetostatic and (O[10 5 V/m]) electrostatic fields in regions of ultra high (O[10-11 mbar]) vacuum in order to obtain precise measurements of the electron energy spectrum near the endpoint of tritium beta-decay. The electrostatic fields in KATRIN are formed by multiscale electrode geometries, necessitating the development of high performance field simulation software. To this end, we present a Boundary Element Method (BEM) with analytic boundary integral terms in conjunction with the Robin Hood linear algebraic solver, a nonstationary successive subspace correction (SSC) method. We describe an implementation of these techniques for high performance computing environments in the software KEMField, along with the geometry modeling and discretization software KGeoBag. We detail the application of KEMField and KGeoBag to KATRIN's spectrometer and detector sections, and demonstrate its use in furthering several of KATRIN's scientific goals. Finally, we present the results of a measurement designed to probe the electrostatic profile of KATRIN's main spectrometer in comparison to simulated results.

Experimental validation of a self-calibrating cryogenic mass flowmeter

NASA Astrophysics Data System (ADS)

Janzen, A.; Boersch, M.; Burger, B.; Drache, J.; Ebersoldt, A.; Erni, P.; Feldbusch, F.; Oertig, D.; Grohmann, S.

2017-12-01

The Karlsruhe Institute of Technology (KIT) and the WEKA AG jointly develop a commercial flowmeter for application in helium cryostats. The flowmeter functions according to a new thermal measurement principle that eliminates all systematic uncertainties and enables self-calibration during real operation. Ideally, the resulting uncertainty of the measured flow rate is only dependent on signal noises, which are typically very small with regard to the measured value. Under real operating conditions, cryoplant-dependent flow rate fluctuations induce an additional uncertainty, which follows from the sensitivity of the method. This paper presents experimental results with helium at temperatures between 30 and 70 K and flow rates in the range of 4 to 12 g/s. The experiments were carried out in a control cryostat of the 2 kW helium refrigerator of the TOSKA test facility at KIT. Inside the cryostat, the new flowmeter was installed in series with a Venturi tube that was used for reference measurements. The measurement results demonstrate the self-calibration capability during real cryoplant operation. The influences of temperature and flow rate fluctuations on the self-calibration uncertainty are discussed.

Voxel2MCNP: a framework for modeling, simulation and evaluation of radiation transport scenarios for Monte Carlo codes.

PubMed

Pölz, Stefan; Laubersheimer, Sven; Eberhardt, Jakob S; Harrendorf, Marco A; Keck, Thomas; Benzler, Andreas; Breustedt, Bastian

2013-08-21

The basic idea of Voxel2MCNP is to provide a framework supporting users in modeling radiation transport scenarios using voxel phantoms and other geometric models, generating corresponding input for the Monte Carlo code MCNPX, and evaluating simulation output. Applications at Karlsruhe Institute of Technology are primarily whole and partial body counter calibration and calculation of dose conversion coefficients. A new generic data model describing data related to radiation transport, including phantom and detector geometries and their properties, sources, tallies and materials, has been developed. It is modular and generally independent of the targeted Monte Carlo code. The data model has been implemented as an XML-based file format to facilitate data exchange, and integrated with Voxel2MCNP to provide a common interface for modeling, visualization, and evaluation of data. Also, extensions to allow compatibility with several file formats, such as ENSDF for nuclear structure properties and radioactive decay data, SimpleGeo for solid geometry modeling, ImageJ for voxel lattices, and MCNPX's MCTAL for simulation results have been added. The framework is presented and discussed in this paper and example workflows for body counter calibration and calculation of dose conversion coefficients is given to illustrate its application.

Subsurface urban heat islands in German cities.

PubMed

Menberg, Kathrin; Bayer, Peter; Zosseder, Kai; Rumohr, Sven; Blum, Philipp

2013-01-01

Little is known about the intensity and extension of subsurface urban heat islands (UHI), and the individual role of the driving factors has not been revealed either. In this study, we compare groundwater temperatures in shallow aquifers beneath six German cities of different size (Berlin, Munich, Cologne, Frankfurt, Karlsruhe and Darmstadt). It is revealed that hotspots of up to +20K often exist, which stem from very local heat sources, such as insufficiently insulated power plants, landfills or open geothermal systems. When visualizing the regional conditions in isotherm maps, mostly a concentric picture is found with the highest temperatures in the city centers. This reflects the long-term accumulation of thermal energy over several centuries and the interplay of various factors, particularly in heat loss from basements, elevated ground surface temperatures (GST) and subsurface infrastructure. As a primary indicator to quantify and compare large-scale UHI intensity the 10-90%-quantile range UHII(10-90) of the temperature distribution is introduced. The latter reveals, in comparison to annual atmospheric UHI intensities, an even more pronounced heating of the shallow subsurface. Copyright © 2012 Elsevier B.V. All rights reserved.

Design and development of decentralized water and wastewater technologies: a combination of safe wastewater disposal and fertilizer production.

PubMed

Fach, S; Fuchs, S

2010-01-01

Modern wastewater treatment plants are often inappropriate for communities in developing countries. Such communities lack the funding, resources and skilled labour required to implement, operate, and maintain these plants. This research was conducted to investigate and establish an appropriate wastewater treatment system for the district of Gunung Kidul, Indonesia. Due to its lack of water during the dry season, this district is considered one of the poorest areas in the nation. First, wastewater was stored in septic tank units for a retention time of 26 days. Anaerobic conditions occurred, resulting in an 80% reduction of initial COD. The retained sludge was well stabilized with great potential, if dewatered, for reuse as fertilizer. Consequently, supernatant was separated for experiments consisting of lab scale aerobic sand filtering unit. Through filtration, further removals of COD (about 30%) and pathogens were achieved. Rich in nitrogen, the resulting effluent could be used for irrigation and soil conditioning. With faecal sludge and also a mixture of septic sludge and food waste, the hydrolysis stage of anaerobic digestion was examined. This paper discusses the laboratory findings in Karlsruhe and the design and implementation of a treatment system in Glompong, Indonesia.

Co-combustion of E+E waste plastics in the TAMARA test plant

DOE Office of Scientific and Technical Information (OSTI.GOV)

Vehlow, J.; Wanke, T.; Bergfeldt, B.

1997-12-01

The co-combustion of different amounts of various plastic fractions of electrical and electronic (E+E) waste together with municipal solid waste has been tested in the Karlsruhe test incinerator TAMARA. The tests revealed no negative influences upon the combustion process. In general the increased heating value of the fuel causes an improved burnout in all residue streams. The halogens Cl and Br added with the plastics are mainly transferred as HCl or HBr into the flue gas. An influence upon the formation of chlorinated dioxins and furans could not be observed. With increasing Br feed bromine containing homologues were detected inmore » the raw gas. The furans formed easier than the dioxins and those homologues carrying one Br atom were by far prevailing. Even at high Br input the total amount of mixed halogenated species was limited to approximately 30% of the total load of such compounds which did not leave the typical operation window for PCDD/PCDF in TAMARA. The co-combustion tests demonstrated that MSW combustion is an ecologically acceptable and economically sound disposal route for limited amounts of specific E+E waste.« less

Coupling procedure for TRANSURANUS and KTF codes

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jimenez, J.; Alglave, S.; Avramova, M.

2012-07-01

The nuclear industry aims to ensure safe and economic operation of each single fuel rod introduced in the reactor core. This goal is even more challenging nowadays due to the current strategy of going for higher burn-up (fuel cycles of 18 or 24 months) and longer residence time. In order to achieve that goal, fuel modeling is the key to predict the fuel rod behavior and lifetime under thermal and pressure loads, corrosion and irradiation. In this context, fuel performance codes, such as TRANSURANUS, are used to improve the fuel rod design. The modeling capabilities of the above mentioned toolsmore » can be significantly improved if they are coupled with a thermal-hydraulic code in order to have a better description of the flow conditions within the rod bundle. For LWR applications, a good representation of the two phase flow within the fuel assembly is necessary in order to have a best estimate calculation of the heat transfer inside the bundle. In this paper we present the coupling methodology of TRANSURANUS with KTF (Karlsruhe Two phase Flow subchannel code) as well as selected results of the coupling proof of principle. (authors)« less

Beyond grid security

NASA Astrophysics Data System (ADS)

Hoeft, B.; Epting, U.; Koenig, T.

2008-07-01

While many fields relevant to Grid security are already covered by existing working groups, their remit rarely goes beyond the scope of the Grid infrastructure itself. However, security issues pertaining to the internal set-up of compute centres have at least as much impact on Grid security. Thus, this talk will present briefly the EU ISSeG project (Integrated Site Security for Grids). In contrast to groups such as OSCT (Operational Security Coordination Team) and JSPG (Joint Security Policy Group), the purpose of ISSeG is to provide a holistic approach to security for Grid computer centres, from strategic considerations to an implementation plan and its deployment. The generalised methodology of Integrated Site Security (ISS) is based on the knowledge gained during its implementation at several sites as well as through security audits, and this will be briefly discussed. Several examples of ISS implementation tasks at the Forschungszentrum Karlsruhe will be presented, including segregation of the network for administration and maintenance and the implementation of Application Gateways. Furthermore, the web-based ISSeG training material will be introduced. This aims to offer ISS implementation guidance to other Grid installations in order to help avoid common pitfalls.

A wind tunnel study of gaseous tracer dispersion in the convective boundary layer capped by a temperature inversion

NASA Astrophysics Data System (ADS)

Fedorovich, E.; Thäter, J.

Results are presented from wind tunnel simulations of gaseous pollutant dispersion in the atmospheric convective boundary layer (CBL) capped by a temperature inversion. The experiments were performed in the thermally stratified wind tunnel of the University of Karlsruhe, Germany. In the tunnel, the case of horizontally evolving, sheared CBL is reproduced. This distinguishes the employed experimental setup from the preceding laboratory and numerical CBL dispersion studies. The diffusive and mixing properties of turbulence in the studied CBL case have been found to be essentially dependent on the stage of the CBL evolution. Effects of the point source elevation on the horizontal variability of the concentration field, and on the ground level concentration as function of distance from the source have been investigated. The applicability of bottom-up/top-down diffusion concept in the simulated CBL case has been evaluated. The influence of surface wind shear and capping inversion strength on the pollutant dispersion and turbulent exchange across the CBL top has been demonstrated. The imposed positive shear across the inversion has been identified as inhibitor of the CBL growth. Comparisons of concentration patterns from the wind tunnel with water tank data are presented.

Test results of a 20 kA high temperature superconductor current lead using REBCO tapes

NASA Astrophysics Data System (ADS)

Heller, R.; Fietz, W. H.; Gröner, F.; Heiduk, M.; Hollik, M.; Lange, C.; Lietzow, R.

2018-05-01

The Karlsruhe Institute of Technology has developed a 20 kA high temperature superconductor (HTS) current lead (CL) using the second generation material REBCO, as industry worldwide concentrate on the production of this material. The aim was to demonstrate the possibility of replacing the Bi-2223/AgAu tapes by REBCO tapes, while for easy comparison of results, all other components are copies of the 20 kA HTS CL manufactured for the satellite tokamak JT-60SA. After the manufacture of all CL components including the newly developed REBCO module, the assembly of the CL has been executed at KIT and an experiment has been carried out in the CuLTKa test facility where the REBCO CL was installed and connected to a JT-60SA CL via a superconducting bus bar. The experiment covers steady state operation up to 20 kA, pulsed operation, measurement of the heat load at 4.5 K end, loss-of-flow-accident simulations, and quench performance studies. Here the results of these tests are reported and directly compared to those of the JT-60SA CL.

Impacts of Extreme Hot Weather Events on Electricity Consumption in Baden-Wuerttemberg

NASA Astrophysics Data System (ADS)

Mimler, S.

2009-04-01

Changes in electricity consumption due to hot weather events were examined for the German federal state Baden-Württemberg. The analysis consists of three major steps: Firstly, an analysis of the media coverage on the hot summer of 2003 gives direct and indirect information about changes in electricity demand due to changes in consumption patterns. On the one hand there was an overall increase in electricity demand due to the more frequent use of air conditionings, fans, cooling devices and water pumps. On the other hand shifts in electricity consumption took place due to modifications in daily routines: if possible, core working times were scheduled earlier, visitor streams in gastronomy and at events shifted from noon to evening hours, a temporal shifting of purchases took place in early morning or evening hours, and an increased night-activity was documented by a higher number of police operations due to noise disturbances. In a second step, some of the findings of the media analysis were quantified for households in the city region of Karlsruhe. For the chosen electric device groups refrigerators, mini-coolers, air conditionings, fans and electric stoves the difference between the consumption on a hot summer day and a normal summer day was computed. For this purpose, assumptions had to be made on the share of affected households, affected devices or usage patterns. These assumptions were summarized into three scenarios on low, medium and high heat induced changes in electricity consumption. In total, the quantification resulted in a range of about 7.5 to 9.2 % of heat-induced over-consumption related to the average amount of electrical load that is normally provided to Karlsruhe households on a summer's day. A third analysis of summer load curves aimed at testing the following hypotheses derived from the media analysis regarding changes in every-day routines and their effects on shifts in load profiles. To test the hypotheses, correlation tests were applied. (1

Determination of 3D surface displacement rates in the Upper Rhine Graben based on GURN (GNSS Upper Rhine Graben Network)

NASA Astrophysics Data System (ADS)

Mayer, M.; Knöpfler, A.; Masson, F.; Ulrich, P.; Heck, B.

2012-04-01

In September 2008, the Institut de Physique du Globe de Strasbourg (Ecole et Observatoire des Sciences de la Terre) and the Geodetic Institute of Karlsruhe University (now: Karlsruhe Institute of Technology) established the transnational cooperation GURN (GNSS Upper Rhine Graben Network). Within the GURN initiative, these institutions are cooperating in order to carry out geo-scientific research in the framework of the transnational project TOPO-WECEP (Western and Central European Platform; link: http://www.topo-wecep.eu/), which succeeded the former project URGENT (Upper Rhine Graben Evolution and NeoTectonics; link: http://comp1.geol.unibas.ch) of the EUCOR universities (European Confederation of Upper Rhine Universities). The Rhine Graben is the central segment of the European Cenozoic rift system, which extends from the North Sea through Germany and France to the Mediterranean coast over a distance of some 1100 km. GURN focusses on the Upper Rhine Graben (URG). The URG is a 300 km long and 40 km wide SSW-NNE trending rift, extending from Basel (Switzerland) to Frankfurt (Germany). It is limited to the west by the Vosges Mountains and to the east by the Black Forest Mountains, culminating in elevations of approx. 1500 m. The uplifted area of the Rhenish Massif bounds the URG to the north. To the south, the Leymen, Ferrette, and Vendlincourt folds represent the northernmost structural front of the Jura fold and thrust belt. Present-day distribution of the seismicity in the URG area is classified as moderate but not null. Expected velocities and strain rates are very low (relative velocities lower than 0.1mm/yr). The research is actually based on data of GNSS (Global Navigation Satellite Systems). A highly precise and highly sensitive geodetic network of permanently operating GNSS sites region has been established in the URG region in order to detect recent short-term (data base starting in year 2002) crustal movements based on displacements of GNSS sites. The

Eleventh international CODATA conference, scientific and technical data in a new era, Karlsruhe, Federal Republic of Germany, 26--29 September 1988: Foreign trip report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Tichler, J.L.

Information on release of radioactive materials in airborne and liquid effluents, solid waste shipments and selected operating information from commercial nuclear power plants in the United States is maintained in a computer data base at Brookhaven National Laboratory (BNL) for the United States Nuclear Regulatory Commission (USNRC). The information entered into the data base is obtained from semiannual reports submitted by the operators of the plants to the USNRC in compliance with the USNRC Regulatory Guide 1.21, ''Measuring, Evaluating, and Reporting Radioactivity in Solid Wastes and Releases of Radioactive Materials in Liquid and Gaseous Effluents from Light-Water-Cooled Nuclear Power Plants.''more » The data on releases in the calendar year 1986 include information from 69 plants representing 87 reactors and contain approximately 19,000 entries. Since all the information is contained in a computer data base management system, entry and rapidly respond to inquiries about the data set and to generate computer readable subsets of the data. Such a subset is used as input to the computer program which generates the annual report, ''Population Dose Commitments Due to Radioactive Releases from Nuclear Power Plant Sites,'' prepared by Pacific Northwest Laboratory for the USNRC. BNL began maintaining this data base for the USNRC with the 1978 information and has added information to the data base for each succeeding year. An annual report summarizing the information for each year, prepared by BNL, and published by the USNRC, is available to the general public. Prior to 1978, annual reports were prepared by the USNRC and are available for the years 1972--1977; however, the information for these years is not in a computer accessible data base.« less

Programming Environments for High Level Scientific Problem Solving. IFIP WG 2.5 Working Conference 6 Held in Karlsruhe, Germany on September 23 - 27, 1991

DTIC Science & Technology

1991-09-27

Springer Verlag (1989). (13] Hulshof , B.J.A. and van Hulzen, J.A.: "Automatic error cumulation control", Proceedir EUROSAM 󈨘 (J. Fitch. ed.), Springer...User’s Manual", Dept of Comp. Science. Univ. of Twente (In preparation). 268 [15] van Hulzen, J.A., Hulshof , B.J.A.. Gates, B.L. and van Heerwaarden, M.C

Variations of atmospheric CH4, N2O and SF6 over Japan and the East China Sea

NASA Astrophysics Data System (ADS)

Ishijima, K.; Goto, D.; Ishidoya, S.; Yashiro, H.; Umezawa, T.; Sugawara, S.; Patra, P. K.; Muromachi, A.; Elkins, J. W.; Dutton, G. S.; Dlugokencky, E. J.; Morimoto, S.; Aoki, S.; Nakazawa, T.

2013-12-01

East Asia is one of the most important regions for anthropogenic sources of both short-lived air pollutants and long-lived greenhouse gases (GHGs). According to recent estimates from an emission database, China has become the largest emitter of long-lived GHGs. Since Japan and the East China Sea are located at the east end of Eurasia, atmospheric species emitted from the continent are transported over them throughout the year. Particularly in winter to spring, outflow of the emitted species is enhanced over the East China Sea due to the East Asian Monsoon. To monitor temporal and spatial variability of atmospheric GHGs in the East Asian region, we conducted systematic GHG observations during 2003-2012 from flask samples collected onboard four different commercial ferry boats, which connected between Wakkanai and Rishiri islands (WAK ; 45.4°N, 141.5°E), between Sakaiminato and Oki islands (OKI ; 35.8°N, 133.2°E), between Kagoshima and Okinawa islands (RYU ; 30.0°N, 130.0°E), and between Ishigaki and Hateruma islands (HTR ; 24.0°N, 124.0°E). Air samples were collected almost weekly, and they were sent to Tohoku University and analyzed for GHGs and related gases. In this study, we present analyses of observed CH4, N2O and SF6 concentrations in comparison with simulations by the Atmospheric general circulation model-based Chemistry Transport model (ACTM). The observed three species predictably show higher concentrations than those observed at Cape Kumukahi (KUM), which is a NOAA air sampling site located in the Central Pacific, reflecting strong outflow of the species from East Asia. Annual mean latitudinal gradients found from the four locations as well as decrease toward KUM are generally reproduced by the ACTM. This is mostly because of reasonable spatial distributions in GHG emissions given in the ACTM. The three species also show discernible seasonal cycles. ACTM simulates seasonal cycles of CH4 and SF6 relatively well, but not for N2O, suggesting

Protection of Landscape Values of Historical Post Military Objects - Complexes in Spatial, Urban and Architectural Planning of Polish Cities

NASA Astrophysics Data System (ADS)

Gawryluk, Dorota; Zagroba, Marek

2017-12-01

Within the borders of modern Poland there are numerous barracks units erected at the turn of the 19th and 20th centuries by the invaders from Russia, Austria and Prussia. Former barracks are a clear element of the history of the place. Historical complexes have a strong influence on the urban landscape and on building their former and contemporary identity. The analysis of functional and landscape absorption of postmodern complexes allows for their adaptation and modern use without limiting the readability of historical values. For this reason, their landscape should be protected comprehensively within the scope of subsequent exposure scales. The aim of the work is to justify the conditions of comprehensive protection of the fortified landscape of the former barracks of the former Russian partition in the landscape of contemporary Polish cities. The article contains a review of the literature on the protection, supplement and access to fortified buildings from the turn of the 19th and 20th centuries in contemporary Poland. A review of current research conducted at various academic centres in Poland, concerning the exposition of fortified buildings in the landscape, is presented. Particular attention was paid to the scales and forms of exposition, proposed for the fortifications and barracks. The paper presents justification for the protection of barracks complexes from the turn of the 19th and 20th centuries in the landscape of Polish cities of the former Russian partition area. Protection of the landscape was proposed in the following scales: superregional, landscape (panorama of the centre), urban (urban structure of the complex in the context of the urban space), architectural and landscape interiors of the complex (WAK) such as alleys, alarm squares, greenery) and detail (view of the building from the outside), interior of the building (characteristic interior spaces, e.g. home chapels, staircases). Taking account of exposures analysis of individual scales

Electron {sup 83}Rb/{sup 83m}Kr Source for the Energy Scale Monitoring in the KATRIN Experiment

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zboril, Miroslav; Nuclear Physics Institute of the ASCR, p. r. i., CZ-25068 Rez; Collaboration: KATRIN Collaboration

The KATRIN (KArlsruhe TRItium Neutrino) experiment investigates the endpoint region of the tritium {beta}-spectrum aiming for the sensitivity on the neutrino mass of 0.2 eV (90% C.L.). A spectrometer of the MAC-E filter (Magnetic Adiabatic Collimation with an Electrostatic filter) type will be used for a total time of at least 5 years. An unrecognized shift of the filtering potential would directly influence the resulting neutrino mass. To continuously monitor the filtering potential the high voltage (HV) will be simultaneously applied to an additional MAC-E filter spectrometer. In this monitor spectrometer suitable electron sources based on atomic/nuclear standards will bemore » utilized. As one of such monitoring tools the solid {sup 83}Rb/{sup 83m}Kr source is intended. It provides conversion electrons from {sup 83m}Kr(t{sub 1/2} = 1.83 h) which is continuously generated by {sup 83}Rb(t{sub 1/2}{approx_equal}86 d). The Calibration and Monitoring task of the KATRIN project demands the long-term energy stability {Delta}E/E of the K-32 conversion electron line (E = 17.8 keV, {Gamma} = 2.7 eV) of {+-}1.6 ppm/month.« less

A tritium activity monitor for the KATRIN Experiment

NASA Astrophysics Data System (ADS)

Schmitt, Udo

2008-06-01

The KArlsruhe TRItium Neutrino experiment KATRIN is designed to measure the absolute neutrino mass scale by analyzing the endpoint region of the tritium beta-decay spectrum with a sensitivity of 0.2 eV/c2 (90 % C.L.). A high-luminous windowless gaseous tritium source with an activity of 1.7 · 1011 Bq will produce the decay electrons, their energy spectrum will be analyzed by a combination of two electrostatic retarding spectrometers with magnetic adiabatic collimation (MAC-E-filter). Fluctuations of the source column density and inelastic scattering processes within the source affect the energy distribution of the decay electrons. Hence, a precise and continuous monitoring of the source activity is necessary to correct the data taken by the main detector. A prototype of the beam monitor detector, based on a silicon drift diode, has been developed to measure an expected counting rate in the range of 106/(s · mm2). The detector element shall be moveable across the complete beam in a magnetic field of 0.8 T, resulting in a beam diameter of 20 cm. A precise sensor positioning device has been designed and built to be compatible with the primary beamline vacuum of 10-11 mbar.

Using SRμCT to define water transport capacity in Picea abies

NASA Astrophysics Data System (ADS)

Lautner, Silke; Lenz, Claudia; Hammel, Jörg; Moosmann, Julian; Kühn, Michael; Caselle, Michele; Vogelgesang, Matthias; Kopmann, Andreas; Beckmann, Felix

2017-10-01

Water transport from roots to shoots is a vital necessity in trees in order to sustain their photosynthetic activity and, hence, their physiological activity. The vascular tissue in charge is the woody body of root, stem and branches. In gymnosperm trees, like spruce trees (Picea abies (L.) Karst.), vascular tissue consists of tracheids: elongated, protoplast- free cells with a rigid cell wall that allow for axial water transport via their lumina. In order to analyze the over-all water transport capacity within one growth ring, time-consuming light microscopy analysis of the woody sample still is the conventional approach for calculating tracheid lumen area. In our investigations at the Imaging Beamline (IBL) operated by the Helmholtz-Zentrum Geesthacht (HZG) at PETRA III storage ring of the Deutsches Elektronen-Synchrotron DESY, Hamburg, we applied SRμCT on small wood samples of spruce trees in order to visualize and analyze size and formation of xylem elements and their respective lumina. The selected high-resolution phase-contrast technique makes full use of the novel 20 MPixel CMOS area detector developed within the cooperation of HZG and the Karlsruhe data by light microscopy analysis and, hence, prove, that μCT is a most appropriate method to gain valid information on xylem cell structure and tree water transport capacity.

Progress on the superconducting undulator for ANKA and on the instrumentation for R and D

DOE Office of Scientific and Technical Information (OSTI.GOV)

Casalbuoni, Sara; Baumbach, Tilo; Grau, Andreas

2010-06-23

Superconducting undulators show a larger magnetic field strength for the same gap and period length, as compared to permanent magnet devices, which allows to generate X-ray beams of higher brilliance and with harder spectrum. The worldwide first short period length superconducting undulator is in operation since 2005 at the synchrotron light source ANKA in Karlsruhe [1]. To further drive the development in this field a research and development program is being carried out. In this contribution we report on the last progress of the construction of a 1.5 m long superconducting undulator with a period length of 15 mm, plannedmore » to be installed in ANKA beginning 2010 to be the light source of the new beamline NANO for high resolution X-ray scattering. The key specifications of the system are an undulator parameter K higher than 2 (with a magnetic gap of 5 mm) and a phase error smaller than 3.5 degrees. Cryocoolers will keep the coils at 4.2 K for a beam heat load of 4 W. The ongoing R and D includes improvements in understanding of the magnetic field properties and of the beam heat load mechanisms. The tools and instruments under development to fulfill these tasks are also discussed.« less

Analysis of nonlocal thermodynamic equilibrium CO 4.7 μm fundamental, isotopic, and hot band emissions measured by the Michelson Interferometer for Passive Atmospheric Sounding on Envisat

NASA Astrophysics Data System (ADS)

Funke, B.; López-Puertas, M.; Bermejo-Pantaleón, D.; von Clarmann, T.; Stiller, G. P.; HöPfner, M.; Grabowski, U.; Kaufmann, M.

2007-06-01

Nonlocal thermodynamic equilibrium (non-LTE) simulations of the 12C16O(1 → 0) fundamental band, the 12C16O(2 → 1) hot band, and the isotopic 13C16O(1 → 0) band performed with the Generic Radiative Transfer and non-LTE population Algorithm (GRANADA) and the Karlsruhe Optimized and Precise Radiative Transfer Algorithm (KOPRA) have been compared to spectrally resolved 4.7 μm radiances measured by the Michelson Interferometer for Passive Atmospheric Sounding (MIPAS). The performance of the non-LTE simulation has been assessed in terms of band radiance ratios in order to avoid a compensation of possible non-LTE model errors by retrieval errors in the CO abundances inferred from MIPAS data with the same non-LTE algorithms. The agreement with the measurements is within 5% for the fundamental band and within 10% for the hot band. Simulated 13C16O radiances agree with the measurements within the instrumental noise error. Solar reflectance at the surface or clouds has been identified as an important additional excitation mechanism for the CO(2) state. The study represents a thorough validation of the non-LTE scheme used in the retrieval of CO abundances from MIPAS data.

Cosmic ray measurements with LOPES: Status and recent results

NASA Astrophysics Data System (ADS)

Schröder, F. G.; Apel, W. D.; Arteaga-Velázquez, J. C.; Bähren, L.; Bekk, K.; Bertaina, M.; Biermann, P. L.; Blümer, J.; Bozdog, H.; Brancus, I. M.; Chiavassa, A.; Daumiller, K.; de Souza, V.; Di Pierro, F.; Doll, P.; Engel, R.; Falcke, H.; Fuchs, B.; Fuhrmann, D.; Gemmeke, H.; Grupen, C.; Haungs, A.; Heck, D.; Hörandel, J. R.; Horneffer, A.; Huber, D.; Huege, T.; Isar, P. G.; Kampert, K.-H.; Kang, D.; Krömer, O.; Kuijpers, J.; Link, K.; Łuczak, P.; Ludwig, M.; Mathes, H. J.; Melissas, M.; Morello, C.; Oehlschläger, J.; Palmieri, N.; Pierog, T.; Rautenberg, J.; Rebel, H.; Roth, M.; Rühle, C.; Saftoiu, A.; Schieler, H.; Schmidt, A.; Sima, O.; Toma, G.; Trinchero, G. C.; Weindl, A.; Wochele, J.; Zabierowski, J.; Zensus, J. A.

2013-05-01

LOPES is a digital antenna array at the Karlsruhe Institute of Technology, Germany, for cosmic-ray air-shower measurements. Triggered by the co-located KASCADE-Grande air-shower array, LOPES detects the radio emission of air showers via digital radio interferometry. We summarize the status of LOPES and recent results. In particular, we present an update on the reconstruction of the primary-particle properties based on almost 500 events above 100PeV. With LOPES, the arrival direction can be reconstructed with a precision of at least 0.65°, and the energy with a precision of at least 20%, which, however, does not include systematic uncertainties on the absolute energy scale. For many particle and astrophysics questions the reconstruction of the atmospheric depth of the shower maximum, Xmax, is important, since it yields information on the type of the primary particle and its interaction with the atmosphere. Recently, we found experimental evidence that the slope of the radio lateral distribution is indeed sensitive to the longitudinal development of the air shower, but unfortunately, the Xmax precision at LOPES is limited by the high level of anthropogenic radio background. Nevertheless, the developed methods can be transferred to next generation experiments with lower background, which should provide an Xmax precision competitive to other detection technologies.

Investigations of the radio signal of inclined showers with LOPES

NASA Astrophysics Data System (ADS)

Saftoiu, A.; Apel, W. D.; Arteaga, J. C.; Asch, T.; Bähren, L.; Bekk, K.; Bertaina, M.; Biermann, P. L.; Blümer, J.; Bozdog, H.; Brancus, I. M.; Buchholz, P.; Buitink, S.; Cantoni, E.; Chiavassa, A.; Daumiller, K.; de Souza, V.; Doll, P.; Engel, R.; Falcke, H.; Finger, M.; Fuhrmann, D.; Gemmeke, H.; Grupen, C.; Haungs, A.; Heck, D.; Hörandel, J. R.; Horneffer, A.; Huber, D.; Huege, T.; Isar, P. G.; Kampert, K.-H.; Kang, D.; Krömer, O.; Kuijpers, J.; Lafebre, S.; Link, K.; Łuczak, P.; Ludwig, M.; Mathes, H. J.; Melissas, M.; Morello, C.; Nehls, S.; Oehlschläger, J.; Palmieri, N.; Pierog, T.; Rautenberg, J.; Rebel, H.; Roth, M.; Rühle, C.; Schieler, H.; Schmidt, A.; Schröder, F. G.; Sima, O.; Toma, G.; Trinchero, G. C.; Weindl, A.; Wochele, J.; Wommer, M.; Zabierowski, J.; Zensus, J. A.

2012-01-01

We report in this paper on an analysis of 20 months of data taken with LOPES. LOPES is radio antenna array set-up in coincidence with the Grande array, both located at the Karlsruhe Institute of Technology, Germany. The data used in this analysis were taken with an antenna configuration composed of 30 inverted V-shape dipole antennas.We have restricted the analysis to a special selection of inclined showers—with zenith angle θ>40∘. These inclined showers are of particular interest because they are the events with the largest geomagnetic angles and are therefore suitable to test emission models based on geomagnetic effects.The reconstruction procedure of the emitted radio signal in EAS uses as one ingredient the frequency-dependent antenna gain pattern which is obtained from simulations. Effects of the applied antenna model in the calibration procedure of LOPES are studied. In particular, we have focused on one component of the antenna, a metal pedestal, which generates a resonance effect, a peak in the amplification pattern where it is the most affecting high zenith angles, i.e. inclined showers.In addition, polarization characteristics of inclined showers were studied in detail and compared with the features of more vertical showers for the two cases of antenna models, with and without the pedestal.

Progress on the superconducting undulator for ANKA and on the instrumentation for R&D

NASA Astrophysics Data System (ADS)

Casalbuoni, Sara; Baumbach, Tilo; Grau, Andreas; Hagelstein, Michael; de Jauregui, David Saez; Boffo, Cristian; Borlein, Markus; Walter, Wolfgang; Magerl, Andreas; Mashkina, Elena; Vassiljev, Nikita

2010-06-01

Superconducting undulators show a larger magnetic field strength for the same gap and period length, as compared to permanent magnet devices, which allows to generate X-ray beams of higher brilliance and with harder spectrum. The worldwide first short period length superconducting undulator is in operation since 2005 at the synchrotron light source ANKA in Karlsruhe [1]. To further drive the development in this field a research and development program is being carried out. In this contribution we report on the last progress of the construction of a 1.5 m long superconducting undulator with a period length of 15 mm, planned to be installed in ANKA beginning 2010 to be the light source of the new beamline NANO for high resolution X-ray scattering. The key specifications of the system are an undulator parameter K higher than 2 (with a magnetic gap of 5 mm) and a phase error smaller than 3.5 degrees. Cryocoolers will keep the coils at 4.2 K for a beam heat load of 4 W. The ongoing R&D includes improvements in understanding of the magnetic field properties and of the beam heat load mechanisms. The tools and instruments under development to fulfill these tasks are also discussed.

Experimental investigation on charcoal adsorption for cryogenic pump application

NASA Astrophysics Data System (ADS)

Scannapiego, Matthieu; Day, Christian

2017-12-01

Fusion reactors are generating energy by nuclear fusion between deuterium and tritium. In order to evacuate the high gas throughputs from the plasma exhaust, large pumping speed systems are required. Within the European Fusion Programme, the Karlsruhe Institute of Technology (KIT) has taken the lead to design a three-stage cryogenic pump that can provide a separation function of hydrogen isotopes from the remaining gases; hence limiting the tritium inventory in the machine. A primary input parameter for the detailed design of a cryopump is the sticking coefficient between the gas and the pumping surface. For this purpose, the so-called TIMO open panel pump experiment was conducted in the TIMO-2 test facility at KIT in order to measure pumping speeds on an activated carbon surface cooled at temperatures between 6 K and 22 K, for various pure gases and gas mixtures, under fusion relevant gas flow conditions, and for two different geometrical pump configurations. The influences of the panel temperature, the gas throughput and the intake gas temperature on the pumping speed have been characterized, providing valuable qualitative results for the design of the three-stage cryopump. In a future work, supporting Monte Carlo simulations should allow for derivation of the sticking coefficients.

Research reports (Annual reports). State: end of 1974

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

1975-05-01

This compilation of research reports is the third one to be published once a year in the frame of a comprehensive reporting on current investigations with regard to reactor safety. There are three types of reports: RS Research Reports, LRA Research Reports, GFK Research Reports. The RS Research Reports and the LRA Research Reports give information on the investigations sponsored by the Bundesminister fuer Forschung und Technologie (BMFT) and partly by the Bundesminister des Innern (BMI [SR 100, At T 85 a]) as individual reactor safety research projects. The GFK Research Reports inform about theoretical and experimental investigations on reactormore » safety conducted by the Gesellschaft fuer Kernforschung mbH (GFK), Karlsruhe. The Laboratorium fuer Reaktorregelung und Anlagensicherung (LRA), Muenchen-Garching, executes nine individual research projects comprehended under number At T 85 a. The work carried out by the GFK is included in the main project 'Nuclear Safety' (PNS). The single reports are attached to the main parts and focal points of the Research Program Reactor Safety. Therefore, at the head of the reports, under 'Project Number', not only the RS-, LRA- or GFK-Number but also the number of the main part of the Research Program which the reported investigation contributes to is noted. (orig.)« less

Relationship between anthropometry and motor abilities at pre-school age.

PubMed

De Toia, Daniela; Klein, Daniel; Weber, Sarah; Wessely, Nicolas; Koch, Benjamin; Tokarski, Walter; Dordel, Sigrid; Struder, Heiko; Graf, Christine

2009-01-01

Little is known to date about the relationship between poor motor abilities and overweight or obese pre-school children. Thus, this study examined the association between motor abilities and weight status in 1,228 kindergarten children (45.8% female). Anthropometric data were assessed; age 4.7 + or - 1.0 years; height 108.6 + or - 8.0 cm; weight 19.1 + or - 3.6 kg; BMI 16.1 + or - 1.5 kg/m(2). The modified Karlsruher Motor Ability Screening Test was carried out to determine the motor abilities of speed strength, muscular endurance, coordination, flexibility, and speed. Based on the German BMI reference values, 3.5% of the children were obese, 9.6% overweight, 83.4% normal weight, and 3.5% underweight. During various test tasks, below-average motor abilities were discovered in 44.0-47.3%. In all age groups, overweight and obese children did not differ from their normal and underweight counterparts; except for underweight children which fared worse in flexibility. In contrast to former studies with first graders, overweight or obese pre-school children did not possess worse motor abilities than normal weight children. However, the high number of overweight children and motor deficits suggests that preventive measures should start at this early age. Copyright 2009 S. Karger AG, Basel.

On Kiefer’s American Eucyclops (Copepoda, Eucyclopinae): redescriptions and comments on the historical records of E. delachauxi, E. prionophorus, E. bondi and E. leptacanthus

PubMed Central

Mercado-Salas, Nancy F.; Suárez-Morales, Eduardo

2014-01-01

Abstract The freshwater copepod genus Eucyclops contains many supposedly cosmopolitan species whose taxonomic status is still under discussion; some of them represent species complexes. The problem is not exclusive to these widespread species; there are several American Eucyclops needing a taxonomic re-evaluation. Based on the examination of Friedrich Kiefer’s collection in Karlsruhe, Germany, the type specimens of four American species of Eucyclops (E. delachauxi (Kiefer, 1926), E. prionophorus Kiefer, 1931, E. bondi Kiefer, 1934, E. leptacanthus Kiefer, 1956) were re-examined and redescribed using upgraded descriptive standards. Kiefer’s translated descriptions and unpublished original drawings of these species are also presented. Characters like the ornamentation of the antennal basis, ornamentation of intercoxal sclerites of the swimming legs 1–4, length of basipodal seta of leg 1, ornamentation of caudal rami, the presence of aesthetascs and modified setae on the antennules in male, and the structure of the male sixth leg are compared herein to aid a more accurate separation of these American species. A revision of the American records of these species confirms that some are likely to refer to undescribed species. Overall, the diversity of the American Eucyclops appears to be underestimated and certainly deserves further study. PMID:24843261

Approaches to Manufacturing Alpha Emitters For Radioimmunotherapeutic Drugs

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gaylord King, A.; Givens, Kenneth R.; Miller, William H.

Several alpha emitting isotopes have been proposed for radioimmunotherapy. To produce these nuclides reliably and in quantities needed, unique manufacturing approaches will be required. This paper describes the approaches that are being developed for the manufacture of 225Actinium (225 Ac) that decays to 213Bismuth (213 Bi) and the commercial manufacturing approaches. Oak Ridge National Laboratory (ORNL) currently supplies the actinium used for research and medical use. Today the ORNL 233U stockpiles only provide sufficient material for research quantities of 213 Bi. At the Institute for Transuranium Elements (ITU), in Karlsruhe, researchers have also developed a method of irradiating radium-226 withmore » protons in a cyclotron to produce actinium- 225 through the reaction 226Ra (p, 2n) 225Ac. Researchers from the Missouri University (MU), the Missouri University Research Reactor (MURR), MedActinium, Inc. and Los Alamos National Laboratory (LANL) are working on a collaborative effort to benchmark and optimize the production of 213Bi via neutron bombardment of 226Ra. MedActinium, Inc., in collaboration with commercial and institutional investigators at PG Research Foundation (PGRF) and Memorial Sloan Kettering Cancer Center (MSKCC), is developing commercial approaches to manufacturing these unique radioimmunotherapeutic drugs.« less

In situ treatment of VOCs by recirculation technologies

DOE Office of Scientific and Technical Information (OSTI.GOV)

Siegrist, R.L.; Webb, O.F.; Ally, M.R.

1993-06-01

The project described herein was conducted by Oak Ridge National Laboratory (ORNL) to identify processes and technologies developed in Germany that appeared to have near-term potential for enhancing the cleanup of volatile organic compound (VOC) contaminated soil and groundwater at DOE sites. Members of the ORNL research team identified and evaluated selected German technologies developed at or in association with the University of Karlsruhe (UoK) for in situ treatment of VOC contaminated soils and groundwater. Project activities included contacts with researchers within three departments of the UoK (i.e., Applied Geology, Hydromechanics, and Soil and Foundation Engineering) during fall 1991 andmore » subsequent visits to UoK and private industry collaborators during February 1992. Subsequent analyses consisted of engineering computations, groundwater flow modeling, and treatment process modeling. As a result of these project efforts, two processes were identified as having near-term potential for DOE: (1) the vacuum vaporizer well/groundwater recirculation well and (2) the porous pipe/horizontal well. This document was prepared to summarize the methods and results of the assessment activities completed during the initial year of the project. The project is still ongoing, so not all facets of the effort are completely described in this document. Recommendations for laboratory and field experiments are provided.« less

Heat Transfer Prediction of Film Cooling in Supersonic Flow

NASA Astrophysics Data System (ADS)

Luchi, Riccardo; Salvadori, Simone; Martelli, Francesco

2008-09-01

Considering the modern high pressure stages of gas turbines, the flow over the suction side of the blades can be affected by the presence of shock impingement and boundary layer separation. Furthermore, it should be pointed out that the combustor exit temperature reaches values which are close to the allowable material limit. Then, a cooling system based on the film cooling approach should be designed to prevent failure. The interaction between the ejected coolant and the shock impingement must be studied to achieve a higher efficiency of the cooling system. The proposed approach is based on the numerical evaluation of a film cooled test section experimentally studied at the University of Karlsruhe. The testing rig consists in a converging-diverging nozzle that accelerates the flow up to sonic conditions while an oblique shock is generated at the nozzle exit section. Three cases have been studied, changing the cooling holes position with respect to the shock impingement over the cooled surface. The obtained results are presented and compared with the experimental data. The used solver is the in-house CFD 3D code HybFlow, developed at the University of Florence. This study has been carried out in the frame of the EU funded TATEF2 project.

Modelling of the test of the JT-60SA HTS current leads

NASA Astrophysics Data System (ADS)

Zappatore, A.; Heller, R.; Savoldi, L.; Zanino, R.

2017-07-01

The CURLEAD code, which was developed at the Karlsruhe Institute of Technology (KIT), implements an integrated 1D transient model of a high temperature superconducting (HTS) current lead (CL) including the room termination (RT), the meander-flow type heat exchanger (HX), and the HTS module. CURLEAD was successfully used for the design of the 70 kA ITER demonstrator and of the W7-X and JT-60SA CLs. Recently the code was successfully applied to the prediction and analysis of steady state operation of the ITER correction coils (CC) HTS CL. Here the steady state and pulsed operation of the JT-60SA HTS CLs are analysed, which requires also the modelling of the HX shell and of the vacuum shell, which was not present in the ITER CC. The CURLEAD model extension is presented and the capability of the new version of CURLEAD to reproduce the transient experimental data of the JT-60SA HTS CL is shown. The results obtained provide a better understanding of key parameters of the CL, among which the temperature evolution at the HX-HTS interface, the GHe mass flow rate needed in the HX to achieve the target temperature at that location and the heat load at the cold end.

Stellar neutron capture cross sections of 41K and 45Sc

NASA Astrophysics Data System (ADS)

Heil, M.; Plag, R.; Uberseder, E.; Bisterzo, S.; Käppeler, F.; Mengoni, A.; Pignatari, M.

2016-05-01

The neutron capture cross sections of light nuclei (A <56 ) are important for s -process scenarios since they act as neutron poisons. We report on measurements of the neutron capture cross sections of 41K and 45Sc, which were performed at the Karlsruhe 3.7 MV Van de Graaff accelerator via the activation method in a quasistellar neutron spectrum corresponding to a thermal energy of k T =25 keV. Systematic effects were controlled by repeated irradiations, resulting in overall uncertainties of less than 3%. The measured spectrum-averaged data have been used to normalize the energy-dependent (n ,γ ) cross sections from the main data libraries JEFF-3.2, JENDL-4.0, and ENDF/B-VII.1, and a set of Maxwellian averaged cross sections was calculated for improving the s -process nucleosynthesis yields in AGB stars and in massive stars. At k T =30 keV, the new Maxwellian averaged cross sections of 41K and 45Sc are 19.2 ±0.6 mb and 61.3 ±1.8 mb, respectively. Both values are 20% lower than previously recommended. The effect of neutron poisons is discussed for nuclei with A <56 in general and for the investigated isotopes in particular.

20 years of cosmic muons research performed in IFIN-HH

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mitrica, Bogdan

2012-11-20

During the last two decades a modern direction in particle physics research has been developed in IFIN-HH Bucharest, Romania. The history started with the WILLI detector built in IFIN-HH Bucharest in collaboration with KIT Karlsruhe (formerly Forschungszentrum Karlsruhe). The detector was designed for measurements of the low energy muon charge ratio (< 1GeV) based on a delayed coincidence method, measuring the decay time of the muons stopped in the detector: the positive muons decay freely, but the negative muons are captured in the atom thus creating muonic atoms and decay depending on the nature of the host atom. In amore » first configuration, the WILLI detector was placed in a fixed position for measuring vertical muons. Further WILLI has been transformed in a rotatable device which allows directional measurements of muon charge ratio and muon flux. The results exhibit a pronounced azimuthal asymmetry (East-West effect) due to the different in fluence of the geomagnetic field on the trajectories of positive and negative muons in air. In parallel, flux measurement, taking into account muon events with nergies > 0.4GeV, show a diurnal modulation of the muon flux. The analysis of the muon events for energies < 0.6GeV reveals an aperiodic variation of the muon flux. A new detection system performing coincidence measurements between the WILLI calorimeter and a small array of 12 scintillators plates has been installed in IFIN-HH starting from the autumn of 2010. The aim of the system is to investigate muon charge ratio from individual EAS by using the mini-array as trigger for the WILLI calorimeter. Such experimental studies could provide detailed information on hadronic interaction models and primary cosmic ray composition at energies around 10{sup 15}eV. Simulation studies and preliminary experimental tests, regarding the performances of the mini-array, have been performed using H and Fe primaries, with energies in a range 10{sup 13}eV - 10{sup 15}eV. The results

The Karlsruhe Metabolomics and Nutrition (KarMeN) Study: Protocol and Methods of a Cross-Sectional Study to Characterize the Metabolome of Healthy Men and Women

PubMed Central

Kriebel, Anita; Dörr, Claudia; Bandt, Susanne; Rist, Manuela; Roth, Alexander; Hummel, Eva; Kulling, Sabine; Hoffmann, Ingrid; Watzl, Bernhard

2016-01-01

Background The human metabolome is influenced by various intrinsic and extrinsic factors. A precondition to identify such biomarkers is the comprehensive understanding of the composition and variability of the metabolome of healthy humans. Sample handling aspects have an important impact on the composition of the metabolome; therefore, it is crucial for any metabolomics study to standardize protocols on sample collection, preanalytical sample handling, storage, and analytics to keep the nonbiological variability as low as possible. Objective The main objective of the KarMeN study is to analyze the human metabolome in blood and urine by targeted and untargeted metabolite profiling (gas chromatography-mass spectrometry [GC-MS], GC×GC-MS, liquid chromatography-mass spectrometry [LC-MS/MS], and1H nuclear magnetic resonance [NMR] spectroscopy) and to determine the impact of sex, age, body composition, diet, and physical activity on metabolite profiles of healthy women and men. Here, we report the outline of the study protocol with special regard to all aspects that should be considered in studies applying metabolomics. Methods Healthy men and women, aged 18 years or older, were recruited. In addition to a number of anthropometric (height, weight, body mass index, waist circumference, body composition), clinical (blood pressure, electrocardiogram, blood and urine clinical chemistry) and functional parameters (lung function, arterial stiffness), resting metabolic rate, physical activity, fitness, and dietary intake were assessed, and 24-hour urine, fasting spot urine, and plasma samples were collected. Standard operating procedures were established for all steps of the study design. Using different analytical techniques (LC-MS, GC×GC-MS,1H NMR spectroscopy), metabolite profiles of urine and plasma were determined. Data will be analyzed using univariate and multivariate as well as predictive modeling methods. Results The project was funded in 2011 and enrollment was carried out between March 2012 and July 2013. A total of 301 volunteers were eligible to participate in the study. Metabolite profiling of plasma and urine samples has been completed and data analysis is currently underway. Conclusions We established the KarMeN study applying a broad set of clinical and physiological examinations with a high degree of standardization. Our experimental approach of combining scheduled timing of examinations and sampling with the multiplatform approach (GC×GC-MS, GC-MS, LC-MS/MS, and1H NMR spectroscopy) will enable us to differentiate between current and long-term effects of diet and physical activity on metabolite profiles, while enabling us at the same time to consider confounders such as age and sex in the KarMeN study. Trial Registration German Clinical Trials Register DRKS00004890; https://drks-neu.uniklinik-freiburg.de/drks_web/navigate.do? navigationId=trial.HTML&TRIAL_ID=DRKS00004890 (Archived by WebCite at http://www.webcitation.org/6iyM8dMtx) PMID:27421387

International Annual Conference (29th) of ICT Held in Karlsruhe, Federal Republic of Germany on June 30-July 3, 1998. Energetic Materials; Production, Processing and Characterization

DTIC Science & Technology

1998-06-26

The Final Proceedings for 29th International Annual Conference of ICT, 30 June 1998 - 3 July 1998. This is an interdisciplinary conference. Topics...include: (1) Components; (2) Particle Technology; (3) Synthesis, Production and Processing; (4) Characterization of Energetic Materials; (5) Safety Technology; and (6) Quality Assurance and Environmental Aspects.

Ice nucleating particles measured during the laboratory and field intercomparisons FIN-2 and FIN-3 by the diffusion chamber FRIDGE

NASA Astrophysics Data System (ADS)

Weber, Daniel; Schrod, Jann; Curtius, Joachim; Haunold, Werner; Thomson, Erik; Bingemer, Heinz

2016-04-01

The measurement of atmospheric ice nucleating particles (INP) is still challenging. In the absence of easily applicable INP standards the intercomparison of different methods during collaborative laboratory and field workshops is a valuable tool that can shine light on the performance of individual methods for the measurement of INP [1]. FIN-2 was conducted in March 2015 at the AIDA facility in Karlsruhe as an intercomparison of mobile instruments for measuring INP [2]. FIN-3 was a field campaign at the Desert Research Institutes Storm Peak Laboratory in Colorado in September 2015 [3]. The FRankfurt Ice nucleation Deposition freezinG Experiment (FRIDGE) participated in both experiments. FRIDGE measures ice nucleating particles by electrostatic precipitation of aerosol particles onto Si-wafers in a collection unit, followed by activation, growth, and optical detection of ice crystals on the substrate in an isostatic diffusion chamber [4,5]. We will present and discuss results of our measurements of deposition/condensation INP and of immersion INP with FRIDGE during FIN-2 and FIN-3. Acknowledgements: The valuable contributions of the FIN organizers and their institutions, and of the FIN Workshop Science team are gratefully acknowledged. Our work was supported by Deutsche Forschungsgemeinschaft (DFG) under the Research Unit FOR 1525 (INUIT) and the EU FP7-ENV- 2013 BACCHUS project under Grant Agreement 603445.

First calibration measurements of an FTIR absorption spectroscopy system for liquid hydrogen isotopologues for the isotope separation system of fusion power plants

DOE Office of Scientific and Technical Information (OSTI.GOV)

Groessle, R.; Beck, A.; Bornschein, B.

2015-03-15

Fusion facilities like ITER and DEMO will circulate huge amounts of deuterium and tritium in their fuel cycle with an estimated throughput of kg per hour. One important capability of these fuel cycles is to separate the hydrogen isotopologues (H{sub 2}, D{sub 2}, T{sub 2}, HD, HT, DT). For this purpose the Isotope Separation System (ISS), using cryogenic distillation, as part of the Tritium Enrichment Test Assembly (TRENTA) is under development at Tritium Laboratory Karlsruhe. Fourier transform infrared absorption spectroscopy (FTIR) has been selected to prove its capability for online monitoring of the tritium concentration in the liquid phase atmore » the bottom of the distillation column of the ISS. The actual research-development work is focusing on the calibration of such a system. Two major issues are the identification of appropriate absorption lines and their dependence on the isotopic concentrations and composition. For this purpose the Tritium Absorption IR spectroscopy experiment has been set up as an extension of TRENTA. For calibration a Raman spectroscopy system is used. First measurements, with equilibrated mixtures of H{sub 2}, D{sub 2} and HD demonstrate that FTIR can be used for quantitative analysis of liquid hydro-gen isotopologues and reveal a nonlinear dependence of the integrated absorbance from the D{sub 2} concentration in the second vibrational branch of D{sub 2} FTIR spectra. (authors)« less

Does the choice of nucleotide substitution models matter topologically?

PubMed

Hoff, Michael; Orf, Stefan; Riehm, Benedikt; Darriba, Diego; Stamatakis, Alexandros

2016-03-24

In the context of a master level programming practical at the computer science department of the Karlsruhe Institute of Technology, we developed and make available an open-source code for testing all 203 possible nucleotide substitution models in the Maximum Likelihood (ML) setting under the common Akaike, corrected Akaike, and Bayesian information criteria. We address the question if model selection matters topologically, that is, if conducting ML inferences under the optimal, instead of a standard General Time Reversible model, yields different tree topologies. We also assess, to which degree models selected and trees inferred under the three standard criteria (AIC, AICc, BIC) differ. Finally, we assess if the definition of the sample size (#sites versus #sites × #taxa) yields different models and, as a consequence, different tree topologies. We find that, all three factors (by order of impact: nucleotide model selection, information criterion used, sample size definition) can yield topologically substantially different final tree topologies (topological difference exceeding 10 %) for approximately 5 % of the tree inferences conducted on the 39 empirical datasets used in our study. We find that, using the best-fit nucleotide substitution model may change the final ML tree topology compared to an inference under a default GTR model. The effect is less pronounced when comparing distinct information criteria. Nonetheless, in some cases we did obtain substantial topological differences.

Factors of subjective heat stress of urban citizens in contexts of everyday life

NASA Astrophysics Data System (ADS)

Kunz-Plapp, Tina; Hackenbruch, Julia; Schipper, Janus Willem

2016-04-01

Heat waves and the consequent heat stress of urban populations have a growing relevance in urban risk management and strategies of urban adaptation to climate change. In this context, social science studies on subjective experiencing of heat as stress by urban citizens are a new emerging field. To contribute to the understanding of self-reported subjective heat stress and its major determinants in a daily life perspective, we conducted a questionnaire survey with 323 respondents in Karlsruhe, Germany, after heat waves in July and August 2013. Statistical data analysis showed that subjective heat stress is an issue permeating everyday activities. Subjective heat stress at home was lower than at work and in general. Subjective heat stress in general, at home, and at work was determined by the health impairments experienced during the heat and the feeling of being helplessly exposed to the heat. For subjective heat stress at home, characteristics of the residential building and the built environment additionally played a role. Although the rate of implemented coping measures was rather high, coping measures showed no uniform effect for the subjective heat stress. We conclude that in terms of urban adaptation strategies, further research is needed to understand how various processes of daily social (work) life enable or limit individual coping and that communication strategies are important for building capacities to better cope with future heat waves.

A study of the polyethylene membrane used in diffusion chambers for radon gas concentration measurements

NASA Astrophysics Data System (ADS)

Leung, S. Y. Y.; Nikezic, D.; Leung, J. K. C.; Yu, K. N.

2007-10-01

Solid-state nuclear track detectors (SSNTDs) in diffusion chambers have been routinely used for long-term measurements of radon gas concentrations. In usual practice, a filter is added across the top of the diffusion chamber to stop the progeny from entering. Thoron can also be deterred from entering the diffusion chamber by using a polyethylene (PE) membrane. However, the thickness of the PE membrane is rarely specified in the literature. In this paper, we will present our experimental results for a radon exposure that the number of alpha-particle tracks registered by the LR 115 SSNTD in a Karlsruhe diffusion chamber covered with one layer of PE membrane is actually enhanced. This is explained by enhanced deposition of radon progeny on the outside surface of the PE membrane and the insufficient thickness of the PE membrane to stop the alpha particles emitted from these deposited radon progeny to reach the SSNTD. We will present the PE thickness which can stop the alpha particles emitted from the deposited radon or thoron progeny. For the "twin diffusion chambers method", one of the diffusion chambers is covered with PE membranes. The optimal number of thickness of PE membranes will be determined, which allows the largest amount of radon gas to diffuse into the diffusion chamber while at the same time screening out the largest amount of thoron gas.

Coupled exposure to ingredients of cosmetic products: II. Preservatives.

PubMed

Uter, Wolfgang; Yazar, Kerem; Kratz, Eva-Maria; Mildau, Gerd; Lidén, Carola

2014-04-01

The use of cosmetics exposes consumers to mixtures of ingredients, many of which are potential allergens. Many cosmetics contain one or several preservatives, some being important contact allergens. To examine the pattern of co-exposure to preservatives in different categories of cosmetics. A survey of products marketed in Germany, conducted in 2006-2009 by the Chemical and Veterinary Investigation Office in Karlsruhe, identified 4680 products categorizable according to Annex I to the Cosmetics Directive with information on the presence of preservatives. The occurrence and co-occurrence of preservatives were analysed and presented in tabular and graphical format. Thirty per cent of all products were not declared to contain any preservatives; for 8%, no INCI labelling was present. For the remainder, the number of preservatives used tended to be higher in leave-on than in rinse-off products. Most often, combinations of (up to all five) parabens were used (39% of all products). Combinations with phenoxyethanol were also frequent. Formaldehyde releasers were found in 8% of products overall. The pattern of co-exposure to preservatives in important categories of cosmetic products illustrates the 'cocktail' of allergens that may facilitate sensitization, although, conversely, the combination of preservatives allows individual use levels to be kept lower, thereby possibly reducing sensitization risk. © 2013 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

Absolute neutrino mass measurements

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wolf, Joachim

2011-10-06

The neutrino mass plays an important role in particle physics, astrophysics and cosmology. In recent years the detection of neutrino flavour oscillations proved that neutrinos carry mass. However, oscillation experiments are only sensitive to the mass-squared difference of the mass eigenvalues. In contrast to cosmological observations and neutrino-less double beta decay (0v2{beta}) searches, single {beta}-decay experiments provide a direct, model-independent way to determine the absolute neutrino mass by measuring the energy spectrum of decay electrons at the endpoint region with high accuracy.Currently the best kinematic upper limits on the neutrino mass of 2.2eV have been set by two experiments inmore » Mainz and Troitsk, using tritium as beta emitter. The next generation tritium {beta}-experiment KATRIN is currently under construction in Karlsruhe/Germany by an international collaboration. KATRIN intends to improve the sensitivity by one order of magnitude to 0.2eV. The investigation of a second isotope ({sup 137}Rh) is being pursued by the international MARE collaboration using micro-calorimeters to measure the beta spectrum. The technology needed to reach 0.2eV sensitivity is still in the R and D phase. This paper reviews the present status of neutrino-mass measurements with cosmological data, 0v2{beta} decay and single {beta}-decay.« less

Relative performance of different types of passive dosimeters employing solid state nuclear track detectors.

PubMed

Jamil, K; Al-Ahmady, K K; Fazal-ur-Rehman; Ali, S; Qureshi, A A; Khan, H A

1997-10-01

Radon and its progeny, known to be carcinogenic, are a matter of great concern in underground mines and energy conserved air-tight houses. Different shapes of dosimeters using solid state nuclear track detectors (SSNTDs) have been devised to measure radon concentrations in mines and dwellings. Sometimes intercomparison of results is required by various laboratories working with solid state nuclear track detector-based passive dosimeters. The present work includes the determination of various parameters for a set of dosimeters consisting of (1) box-type, (2) pen-type, (3) tube-type, (4) Karlsruhe Diffusion Chamber, and (5) bare-type dosimeters. In this research two types of plastics, allyl-diglycol-carbonate (C12H18O7) and cellulose nitrate (C6H8O8N2) known as CR-39 and CN-85, respectively, have been employed. The detection efficiency for alpha particles from radon and its progeny for CR-39 and CN-85 have been compared. All experiments have been carried out in a custom-designed exposure chamber connected to a radon source. The calibration factors, in terms of Bq m(-3) per unit track density (1.0 cm(-2)) with respect to box-type dosimeter, have been determined for intercomparison and standardization of measured radon concentrations by a set of passive radon dosimeters used in various laboratories of the world.

Can one measure the Cosmic Neutrino Background?

NASA Astrophysics Data System (ADS)

Faessler, Amand; Hodák, Rastislav; Kovalenko, Sergey; Šimkovic, Fedor

The Cosmic Microwave Background (CMB) yields information about our Universe at around 380,000 years after the Big Bang (BB). Due to the weak interaction of the neutrinos with matter, the Cosmic Neutrino Background (CNB) should give information about a much earlier time of our Universe, around one second after the BB. Probably, the most promising method to “see” the CNB is the capture of the electron neutrinos from the Background by Tritium, which then decays into 3He and an electron with the energy of the the Q-value = 18.562keV plus the electron neutrino rest mass. The “KArlsruhe TRItium Neutrino” (KATRIN) experiment, which is in preparation, seems presently the most sensitive proposed method for measuring the electron antineutrino mass. At the same time, KATRIN can also look by the reaction νe(˜ 1.95K) +3H →3He + e-(Q = 18.6keV + m νec2). The capture of the Cosmic Background Neutrinos (CNB) should show in the electron spectrum as a peak by the electron neutrino rest mass above Q. Here, the possibility to see the CNB with KATRIN is studied. A detection of the CNB by KATRIN seems not to be possible at the moment. But KATRIN should be able to determine an upper limit for the local electron neutrino density of the CNB.

Can one measure the Cosmic Neutrino Background?

NASA Astrophysics Data System (ADS)

Faessler, Amand; Hodák, Rastislav; Kovalenko, Sergey; Šimkovic, Fedor

The Cosmic Microwave Background (CMB) yields information about our Universe at around 380,000 years after the Big Bang (BB). Due to the weak interaction of the neutrinos with matter, the Cosmic Neutrino Background (CNB) should give information about a much earlier time of our Universe, around one second after the BB. Probably, the most promising method to "see" the CNB is the capture of the electron neutrinos from the Background by Tritium, which then decays into 3He and an electron with the energy of the the Q-value = 18.562 keV plus the electron neutrino rest mass. The "KArlsruhe TRItium Neutrino" (KATRIN) experiment, which is in preparation, seems presently the most sensitive proposed method for measuring the electron antineutrino mass. At the same time, KATRIN can also look by the reaction νe(˜1.95K) + 3H → 3He + e-(Q = 18.6keV + mνec2). The capture of the Cosmic Background Neutrinos (CNB) should show in the electron spectrum as a peak by the electron neutrino rest mass above Q. Here, the possibility to see the CNB with KATRIN is studied. A detection of the CNB by KATRIN seems not to be possible at the moment. But KATRIN should be able to determine an upper limit for the local electron neutrino density of the CNB.

Material distribution in light water reactor-type bundles tested under severe accident conditions

DOE Office of Scientific and Technical Information (OSTI.GOV)

Noack, V.; Hagen, S.J.L.; Hofmann, P.

1997-02-01

Severe fuel damage experiments simulating small-break loss-of-coolant accidents have been carried out in the CORA out-of-pile test facility at Forschungszentrum Karlsruhe. Rod bundles with electrically heated fuel rod simulators containing annular UO{sub 2} pellets, UO{sub 2} full pellet rods, and absorber rods of two kinds (Ag/In/Cd to represent pressurized water reactor conditions and B{sub 4}C to represent boiling water reactor and VVER-1000 fuel elements) were subjected to temperature transients up to 2,300 K. A special method was applied to determine the axial mass distribution of bundle materials. The low-temperature melt formation by various interactions between zirconium and components of absorbermore » and spacer grids strongly influences the bundle degradation and material relocation. Absorber materials can separate from the fuel by a noncoherent relocation of the materials at different temperatures. The distributions of solidified materials in the different test bundles show a clear dependence on the axial temperature profile. Coolant channel blockages are observed mainly at the lower end of the bundle, i.e., near the lowest elevation at which an oxidation excursion resulting from the highly exothermic zirconium-steam reaction had been experienced. This elevation corresponds with a steep axial temperature gradient in the maximum temperature attained. Oxide layers on Zircaloy result in reduced melt formation.« less

IFMIF: overview of the validation activities

NASA Astrophysics Data System (ADS)

Knaster, J.; Arbeiter, F.; Cara, P.; Favuzza, P.; Furukawa, T.; Groeschel, F.; Heidinger, R.; Ibarra, A.; Matsumoto, H.; Mosnier, A.; Serizawa, H.; Sugimoto, M.; Suzuki, H.; Wakai, E.

2013-11-01

The Engineering Validation and Engineering Design Activities (EVEDA) for the International Fusion Materials Irradiation Facility (IFMIF), an international collaboration under the Broader Approach Agreement between Japan Government and EURATOM, aims at allowing a rapid construction phase of IFMIF in due time with an understanding of the cost involved. The three main facilities of IFMIF (1) the Accelerator Facility, (2) the Target Facility and (3) the Test Facility are the subject of validation activities that include the construction of either full scale prototypes or smartly devised scaled down facilities that will allow a straightforward extrapolation to IFMIF needs. By July 2013, the engineering design activities of IFMIF matured with the delivery of an Intermediate IFMIF Engineering Design Report (IIEDR) supported by experimental results. The installation of a Linac of 1.125 MW (125 mA and 9 MeV) of deuterons started in March 2013 in Rokkasho (Japan). The world's largest liquid Li test loop is running in Oarai (Japan) with an ambitious experimental programme for the years ahead. A full scale high flux test module that will house ∼1000 small specimens developed jointly in Europe and Japan for the Fusion programme has been constructed by KIT (Karlsruhe) together with its He gas cooling loop. A full scale medium flux test module to carry out on-line creep measurement has been validated by CRPP (Villigen).

Kinase domain-targeted isolation of defense-related receptor-like kinases (RLK/Pelle) in Platanus×acerifolia: phylogenetic and structural analysis.

PubMed

Pilotti, Massimo; Brunetti, Angela; Uva, Paolo; Lumia, Valentina; Tizzani, Lorenza; Gervasi, Fabio; Iacono, Michele; Pindo, Massimo

2014-12-08

Plant receptor-like kinase (RLK/Pelle) family regulates growth and developmental processes and interaction with pathogens and symbionts.Platanaceae is one of the earliest branches of Eudicots temporally located before the split which gave rise to Rosids and Asterids. Thus investigations into the RLK family in Platanus can provide information on the evolution of this gene family in the land plants.Moreover RLKs are good candidates for finding genes that are able to confer resistance to Platanus pathogens. Degenerate oligonucleotide primers targeting the kinase domain of stress-related RLKs were used to isolate for the first time 111 RLK gene fragments in Platanus×acerifolia. Sequences were classified as candidates of the following subfamilies: CrRLK1L, LRR XII, WAK-like, and LRR X-BRI1 group. All the structural features typical of the RLK kinase domain were identified, including the non-RD motif which marks potential pathogen recognition receptors (PRRs). The LRR XII candidates, whose counterpart in Arabidopsis and rice comprises non-RD PRRs, were mostly non-RD kinases, suggesting a group of PRRs. Region-specific signatures of a relaxed purifying selection in the LRR XII candidates were also found, which is novel for plant RLK kinase domain and further supports the role of LRR XII candidates as PRRs. As we obtained CrRLK1L candidates using primers designed on Pto of tomato, we analysed the phylogenetic relationship between CrRLK1L and Pto-like of plant species. We thus classified all non-solanaceous Pto-like genes as CrRLK1L and highlighted for the first time the close phylogenetic vicinity between CrRLK1L and Pto group. The origins of Pto from CrRLK1L is proposed as an evolutionary mechanism. The signatures of relaxed purifying selection highlight that a group of RLKs might have been involved in the expression of phenotypic plasticity and is thus a good candidate for investigations into pathogen resistance.Search of Pto-like genes in Platanus highlighted the close

Simulating Terrestrial Gamma Ray Flashes due to cosmic ray shower electrons and positrons

NASA Astrophysics Data System (ADS)

Connell, Paul

2017-04-01

The University of Valencia has developed a software simulator LEPTRACK to simulate the relativistic runaway electron avalanches, RREA, that are presumed to be the cause of Terrestrial Gamma Ray Flashes and their powerful accompanying Ionization/Excitation Flashes. We show here results of LEPTRACK simulations of RREA by the interaction of MeV energy electrons/positrons and photons in cosmic ray showers traversing plausible electric field geometries expected in storm clouds. The input beams of MeV shower products were created using the CORSIKA software package from the Karlsruhe Institute of Technology. We present images, videos and plots showing the different Ionization, Excitation and gamma-ray photon density fields produced, along with their time and spatial profile evolution, which depend critically on where the line of shower particles intercept the electric field geometry. We also show a new effect of incoming positrons in the shower, which make up a significant fraction of shower products, in particular their apparent "orbiting" within a high altitude negative induced shielding charge layer, which has been conjectured to produce a signature microwave emission, as well as a short range 511 keV annihilation line. The interesting question posed is if this conjectured positron emission can be observed and correlated with TGF orbital observations to show if a TGF originates in the macro E-fields of storm clouds or the micro E-fields of lightning leaders where this positron "orbiting" is not likely to occur.

Radon induced background processes in the KATRIN pre-spectrometer

NASA Astrophysics Data System (ADS)

Fränkle, F. M.; Bornschein, L.; Drexlin, G.; Glück, F.; Görhardt, S.; Käfer, W.; Mertens, S.; Wandkowsky, N.; Wolf, J.

2011-10-01

The KArlsruhe TRItium Neutrino (KATRIN) experiment is a next generation, model independent, large scale tritium β-decay experiment to determine the effective electron anti-neutrino mass by investigating the kinematics of tritium β-decay with a sensitivity of 200 meV/c 2 using the MAC-E filter technique. In order to reach this sensitivity, a low background level of 10 -2 counts per second (cps) is required. This paper describes how the decay of radon in a MAC-E filter generates background events, based on measurements performed at the KATRIN pre-spectrometer test setup. Radon (Rn) atoms, which emanate from materials inside the vacuum region of the KATRIN spectrometers, are able to penetrate deep into the magnetic flux tube so that the α-decay of Rn contributes to the background. Of particular importance are electrons emitted in processes accompanying the Rn α-decay, such as shake-off, internal conversion of excited levels in the Rn daughter atoms and Auger electrons. While low-energy electrons (<100 eV) directly contribute to the background in the signal region, higher energy electrons can be stored magnetically inside the volume of the spectrometer. Depending on their initial energy, they are able to create thousands of secondary electrons via subsequent ionization processes with residual gas molecules and, since the detector is not able to distinguish these secondary electrons from the signal electrons, an increased background rate over an extended period of time is generated.

Chemical and physical characterization of fertile soil-derived ice residuals from the Fifth International Ice Nucleation workshop in November 2014 (FIN-1)

NASA Astrophysics Data System (ADS)

Hiranuma, Naruki; Möhler, Ottmar; Kulkarni, Gourihar; Laskin, Alexander; Zelenyuk, Alla

2017-04-01

The climate impact of ice-nucleating particles (INPs) derived from fertile soils on global scale has been recently accented by their diversity and efficient freezing ability. However, their representation in atmospheric models is limited in part due to our incomplete knowledge of fertile soil composition, abundance and associated sensitivity to heterogeneous ice nucleation. To fill given knowledge gap, we have investigated a unique/rich set of ice crystal residual samples derived from a variety of fertile soil samples obtained through our participation in the Fifth International Ice Nucleation workshop (FIN-1). FIN-1 was held at the Aerosol Interaction and Dynamics in the Atmosphere (AIDA) facility at Karlsruhe Institute of Technology (KIT), which is the world's foremost facility for studying ice clouds in a controlled setting, in November 2014 to comprehensively study the heterogeneous ice formation in the atmosphere with collaboration among 10 international groups that were funded through European consortium, NSF and USDOE agencies. Here, we will present the nanoscale surface morphology and elemental/molecular composition of ice crystal residuals as well as that of total aerosol samples from the FIN-1 activity to identify and classify any specific mineral and organic inclusions that may have promoted nucleation of ice. Comparing total aerosols to residuals will shed light on the composition and abundance of certain particle types in INPs. Acknowledgements: The valuable contributions of the INUIT (Ice Nuclei Research Unit) collaborators, the FIN organizers, their institutions and the FIN-1 Workshop science team are gratefully acknowledged.

Prevalence of obesity and motor performance capabilities in Tyrolean preschool children.

PubMed

Greier, Klaus; Riechelmann, Herbert; Burtscher, Martin

2014-07-01

The childrens' world of movement has changed dramatically during the last decades. As a consequence motor performance decreases particularly in children affected by overweight and obesity. This study analyses the influence of the body mass index (BMI) on motor performance of pre-school children. In a cross-sectional study including 41 kindergartens in Tyrol (Austria), 4- to 5-year-old children (n = 1,063) were recruited. Four BMI groups were used according to a German BMI reference system: Group I (anorexic/underweight), group II (normal weight), group III (overweight) and group IV (obese). Motor performance was assessed by the use of the Karlsruhe Motorik-Screening (KMS 3-6). Out of the 1,063 preschool children (550 ♂, 513 ♀) 7.6 % (n = 81) were overweight and 5.5 % (n = 58) were obese. The results demonstrate that motor performance of under- and overweight preschool-children is not different from children with normal BMI, but obese children had significantly lower motor performance (p < 0.001). The prevalence of overweight and obese Tyrolean preschool children is similar to those of non-mountainous areas of Austria and Germany. The fact that motor performance is reduced only in obese children suggests that targeted promotion of physical activity is urgently needed for preschool children particularly considering children with a risk to develop obesity. Besides the efforts of parents, nursery schools are the ideal setting for intervention measures.

Analysis of Emission Effects Related to Drivers’ Compliance Rates for Cooperative Vehicle-Infrastructure System at Signalized Intersections

PubMed Central

Liao, Ruohua; Yu, Lei; Sun, Xiaofei

2018-01-01

Unknown remaining time of signal phase at a signalized intersection generally results in extra accelerations and decelerations that increase variations of operating conditions and thus emissions. A cooperative vehicle-infrastructure system can reduce unnecessary speed changes by establishing communications between vehicles and the signal infrastructure. However, the environmental benefits largely depend on drivers’ compliance behaviors. To quantify the effects of drivers’ compliance rates on emissions, this study applied VISSIM 5.20 (Planung Transport Verkehr AG, Karlsruhe, Germany) to develop a simulation model for a signalized intersection, in which light duty vehicles were equipped with a cooperative vehicle-infrastructure system. A vehicle-specific power (VSP)-based model was used to estimate emissions. Based on simulation data, the effects of different compliance rates on VSP distributions, emission factors, and total emissions were analyzed. The results show the higher compliance rate decreases the proportion of VSP bin = 0, which means that the frequencies of braking and idling were lower and light duty vehicles ran more smoothly at the intersection if more light duty vehicles complied with the cooperative vehicle-infrastructure system, and emission factors for light duty vehicles decreased significantly as the compliance rate increased. The case study shows higher total emission reductions were observed with higher compliance rate for all of CO2, NOx, HC, and CO emissions. CO2 was reduced most significantly, decreased by 16% and 22% with compliance rates of 0.3 and 0.7, respectively. PMID:29329214

On the distribution of uranium in hair: Non-destructive analysis using synchrotron radiation induced X-ray fluorescence microprobe techniques

NASA Astrophysics Data System (ADS)

Israelsson, A.; Eriksson, M.; Pettersson, H. B. L.

2015-06-01

In the present study the distribution of uranium in single human hair shafts has been evaluated using two synchrotron radiation (SR) based micro X-ray fluorescence techniques; SR μ-XRF and confocal SR μ-XRF. The hair shafts originated from persons that have been exposed to elevated uranium concentrations. Two different groups have been studied, i) workers at a nuclear fuel fabrication factory, exposed mainly by inhalation and ii) owners of drilled bedrock wells exposed by ingestion of water. The measurements were carried out on the FLUO beamline at the synchrotron radiation facility ANKA, Karlsruhe. The experiment was optimized to detect U with a beam size of 6.8 μm × 3 μm beam focus allowing detection down to ppb levels of U in 10 s (SR μ-XRF setup) and 70 s (SR confocal μ-XRF setup) measurements. It was found that the uranium was present in a 10-15 μm peripheral layer of the hair shafts for both groups studied. Furthermore, potential external hair contamination was studied by scanning of unwashed hair shafts from the workers. Sites of very high uranium signal were identified as particles containing uranium. Such particles, were also seen in complementary analyses using variable pressure electron microscope coupled with energy dispersive X-ray analyzer (ESEM-EDX). However, the particles were not visible in washed hair shafts. These findings can further increase the understanding of uranium excretion in hair and its potential use as a biomonitor.

Fluorescence-based calculus detection using a 405-nm excitation wavelength

NASA Astrophysics Data System (ADS)

Brede, O.; Schelle, F.; Krueger, S.; Oehme, B.; Dehn, C.; Frentzen, M.; Braun, A.

2011-03-01

The aim of this study was to assess the difference of fluorescence signals of cement and calculus using a 405 nm excitation wavelength. A total number of 20 freshly extracted teeth was used. The light source used for this study was a blue LED with a wavelength of 405nm. For each tooth the spectra of calculus and cementum were measured separately. Fluorescence light was collimated into an optical fibre and spectrally analyzed using an echelle spectrometer (aryelle 200, Lasertechnik Berlin, Germany) with an additionally bandpass (fgb 67, Edmund Industrial Optics, Karlsruhe, Germany). From these 40 measurements the median values were calculated over the whole spectrum, leading to two different median spectra, one for calculus and one for cementum. For further statistical analysis we defined 8 areas of interest (AOI) in wavelength regions, showing remarkable differences in signal strength. In 7 AOIs the intensity of the calculus spectrum differed statistically significant from the intensity of the cementum spectrum (p < 0.05). A spectral difference could be shown between calculus and cement between 600nm and 700nm. Thus, we can conclude that fluorescence of calculus shows a significant difference to the fluorescence of cement. A differentiation over the intensity is possible as well as over the spectrum. Using a wavelength of 405nm, it is possible to distinguish between calculus and cement. These results could be used for further devices to develop a method for feedback controlled calculus removal.

Participatory evaluation of disaster resilience performance with urban stakeholders: An implementation case study before and after the 2015 Nepal Ghorka earthquake

NASA Astrophysics Data System (ADS)

Khazai, B.; Anhorn, J.; Burton, C.

2016-12-01

Approaches that make resilience tangible and operational for decision makers have to deal effectively with the degree of impact and change required through different strategic actions in addressing agreed-upon resilience goals. A Resilience Performance Scorecard (RPS) has been designed to enable local stakeholders in identifying existing strengths and weaknesses through providing information on key performance targets along six dimensions of urban resilience both at the city and sub-city district level of geography. The purpose in the development of the Scorecard approach is to build a tool that can provide information on the overall resilience performance and capture the key functional and organizational areas for urban resilience with local government officials. The Resilience Performance Scorecard (RPS) was developed jointly by the Center for Disaster Management and Risk Reduction Technology (CEDIM) at Karlsruhe Institute of Technology, the South Asia Institute (SAI) at Heidelberg University, the and Global Earthquake Model (GEM) Foundation. It was initially implemented with the Lalitpur Sub-Metropolitan Municipality in Nepal one year before the 25 April 7.8 magnitude Gorkha earthquake event as a self-evaluation tool through a fully participatory process with local stakeholders. In a follow-up participatory assessment and implementation of the RPS one month after the earthquake, the results of the participatory resilience investigation demonstrate areas where action towards resilience should be prioritized and reflect the change in perception of resilience among the stakeholders in the face of a large damaging event.

X-ray characterization of curved crystals for hard x-ray astronomy

NASA Astrophysics Data System (ADS)

Buffagni, Elisa; Bonnini, Elisa; Ferrari, Claudio; Virgilli, Enrico; Frontera, Filippo

2015-05-01

Among the methods to focus photons the diffraction in crystals results as one of the most effective for high energy photons. An assembling of properly oriented crystals can form a lens able to focus x-rays at high energy via Laue diffraction in transmission geometry; this is a Laue lens. The x-ray diffraction theory provides that the maximum diffraction efficiency is achieved in ideal mosaic crystals, but real mosaic crystals show diffraction efficiencies several times lower than the ideal case due to technological problems. An alternative and convenient approach is the use of curved crystals. We have recently optimized an efficient method based on the surface damage of crystals to produce self-standing uniformly curved Si, GaAs and Ge tiles of thickness up to 2-3 mm and curvature radii R down to a few meters. We show that, for curved diffracting planes, such crystals have a diffraction efficiency nearly forty times higher than the diffraction efficiency of perfect similar flat crystals, thus very close to that of ideal mosaic crystals. Moreover, in an alternative configuration where the diffracting planes are perpendicular to the curved ones, a focusing effect occurs and will be shown. These results were obtained for several energies between 17 and 120 keV with lab sources or at high energy facilities such as LARIX at Ferrara (Italy), ESRF at Grenoble (France), and ANKA at Karlsruhe (Germany).

Push it to the limit: Characterizing the convergence of common sequences of basis sets for intermolecular interactions as described by density functional theory

NASA Astrophysics Data System (ADS)

Witte, Jonathon; Neaton, Jeffrey B.; Head-Gordon, Martin

2016-05-01

With the aim of systematically characterizing the convergence of common families of basis sets such that general recommendations for basis sets can be made, we have tested a wide variety of basis sets against complete-basis binding energies across the S22 set of intermolecular interactions—noncovalent interactions of small and medium-sized molecules consisting of first- and second-row atoms—with three distinct density functional approximations: SPW92, a form of local-density approximation; B3LYP, a global hybrid generalized gradient approximation; and B97M-V, a meta-generalized gradient approximation with nonlocal correlation. We have found that it is remarkably difficult to reach the basis set limit; for the methods and systems examined, the most complete basis is Jensen's pc-4. The Dunning correlation-consistent sequence of basis sets converges slowly relative to the Jensen sequence. The Karlsruhe basis sets are quite cost effective, particularly when a correction for basis set superposition error is applied: counterpoise-corrected def2-SVPD binding energies are better than corresponding energies computed in comparably sized Dunning and Jensen bases, and on par with uncorrected results in basis sets 3-4 times larger. These trends are exhibited regardless of the level of density functional approximation employed. A sense of the magnitude of the intrinsic incompleteness error of each basis set not only provides a foundation for guiding basis set choice in future studies but also facilitates quantitative comparison of existing studies on similar types of systems.

Coupled exposure to ingredients of cosmetic products: III. Ultraviolet filters.

PubMed

Uter, Wolfgang; Gonçalo, Margarida; Yazar, Kerem; Kratz, Eva-Maria; Mildau, Gerd; Lidén, Carola

2014-09-01

The use of cosmetics exposes consumers to mixtures of ingredients, many of which are potential allergens. Ultraviolet (UV) filters are used not just in sunscreens, but also in other products. Many UV filters are known contact allergens and photoallergens. To examine the pattern of co-exposure to UV filters in cosmetics. A survey of products marketed in Germany, conducted in 2006-2009 by the Chemical and Veterinary Investigation Office in Karlsruhe, identified 4447 products (of all 5667 cosmetic products examined) (i) that were categorizable according to Annex I to the Cosmetics Directive, and (ii) with information on the presence of UV filters or zinc oxide. The occurrence and co-occurrence of UV filters were analysed and presented in tabular and graphical format. UV filters or zinc oxide were present in 22.5% of all 4447 products, ranging from almost 100% in sunscreens to a few per cent in, for example, some hair products; they were absent in two product categories. Frequently, several different UV filters were included in one product, for example in sunscreens (median 4) and in perfumes (median 3). The overall most frequent UV filters were butyl methoxydibenzoylmethane and titanium dioxide, combined mostly with octocrylene in sunscreens and with ethylhexyl methoxycinnamate in creams. The frequent co-occurrence of UV filters in cosmetic products possibly facilitates sensitization, and may explain why patients often react to chemically unrelated UV filters. © 2014 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

Upper bounds of deformation in the Upper Rhine Graben from GPS data - First results from GURN (GNSS Upper Rhine Graben Network)

NASA Astrophysics Data System (ADS)

Masson, Frederic; Knoepfler, Andreas; Mayer, Michael; Ulrich, Patrice; Heck, Bernhard

2010-05-01

In September 2008, the Institut de Physique du Globe de Strasbourg (Ecole et Observatoire des Sciences de la Terre, EOST) and the Geodetic Institute (GIK) of Karlsruhe University (TH) established a transnational cooperation called GURN (GNSS Upper Rhine Graben Network). Within the GURN initiative these institutions are cooperating in order to establish a highly precise and highly sensitive network of permanently operating GNSS sites for the detection of crustal movements in the Upper Rhine Graben region. At the beginning, the network consisted of the permanently operating GNSS sites of SAPOS®-Baden-Württemberg, different data providers in France (e.g. EOST, Teria, RGP) and some further sites (e.g. IGS). In July 2009, the network was extended to the South when swisstopo (Switzerland) and to the North when SAPOS®-Rheinland-Pfalz joined GURN. Therefore, actually the GNSS network consists of approx. 80 permanently operating reference sites. The presentation will discuss the actual status of GURN, main research goals, and will present first results concerning the data quality as well as time series of a first reprocessing of all available data since 2002 using GAMIT/GLOBK (EOST working group) and the Bernese GPS Software (GIK working group). Based on these time series, the velocity as well as strain fields will be calculated in the future. The GURN initiative is also aiming for the estimation of the upper bounds of deformation in the Upper Rhine Graben region.

Numerical Simulation of Wall Heat Load in Combustor Flow

NASA Astrophysics Data System (ADS)

Panara, D.; Hase, M.; Krebs, W.; Noll, B.

2007-09-01

Due to the major mechanism of NOx generation, there is generally a temperature trade off between improved cycle efficiency, material constraints and low NOx emission. The cycle efficiency is proportional to the highest cycle temperature, but unfortunately also the NOx production increases with increasing combustion temperature. For this reason, the modern combustion chamber design has been oriented towards lean premixed combustion system and more and more attention must be focused on the cooling air management. The challenge is to ensure sufficiently low temperature of the combustion liner with very low amount of film or effusion cooling air. Correct numerical prediction of temperature fields and wall heat load are therefore of critical interest in the modern combustion chamber design. Moreover, lean combustion technology has shown the appearance of thermo-acoustic instabilities which have to be taken into account in the simulation and, more in general, in the design of reliable combustion systems. In this framework, the present investigation addresses the capability of a commercial multiphysics code (ANSYS CFX) to correctly predict the wall heat load and the core flow temperature field in a scaled power generation combustion chamber with a simplified ceramic liner. Comparison are made with the experimental results from the ITS test rig at the University of Karlsruhe [1] and with a previous numerical campaign from [2]. In addition the effect of flow unsteadyness on the wall heat load is discussed showing some limitations of the traditional steady state flow thermal design.

Thermal footprints in groundwater of central European cities

NASA Astrophysics Data System (ADS)

Bayer, P.; Menberg, K.; Blum, P.

2014-12-01

Atmospheric thermal pollution in densely populated areas is recognized as a severe problem with consequences for human health, and considerable efforts are being taken to mitigate heat stress in cities. However, anthropogenic activities also influence the thermal environment beneath the ground level, with commonly growing temperatures that affect groundwater ecology and geothermal use efficiency. In our work, we identify the controlling mechanisms for the long-term evolution of such urban heat islands. The shallow groundwater temperatures in several central European cities such as Cologne, Karlsruhe, Munich, Berlin and Zurich were mapped at high spatial and temporal resolution. Thermal anomalies were found to be highly heterogeneous with local hot spots showing temperatures of more than 20°C. Accordingly, these urban regions show a considerable groundwater warming in comparison to undisturbed temperatures of 8-11°C. Examination of potential heat sources by analytical modelling reveals that increased ground surface temperatures and basements of buildings act as dominant drivers for the anthropogenic heat input into the groundwater. The factors are revealed to be case-specific and they may have pronounced local or regional effects. Typical local factors are for example buried district heating networks. In selected cities we find that the average urban heat flux is around one order of magnitude higher than the elevated ground heat flux due to recent climate change. Additionally, such as observed in Zurich, naturally controlled temperature variations can be substantial and they are shown to wash out anthropogenic thermal footprints.

High level tritiated water monitoring by Bremsstrahlung counting using a silicon drift detector

DOE Office of Scientific and Technical Information (OSTI.GOV)

Niemes, S.; Sturm, M.; Michling, R.

2015-03-15

The β-ray induced X-ray spectrometry (BIXS) is a promising technique to monitor the tritium concentration in a fuel cycle of a fusion reactor. For in-situ measurements of high level tritiated water by Bremsstrahlung counting, the characteristics of a low-noise silicon drift detector (SDD) have been examined at the Tritium Laboratory Karlsruhe (TLK). In static measurements with constant sample volume and tritium concentration, the Bremsstrahlung spectra of tritiated water samples in a concentration range of 0.02 to 15 MBq/ml have been obtained. The volume has been kept constant at 5 cm{sup 3}. The observed spectra are well above the noise threshold.more » In addition to X-rays induced by β-rays, the spectra feature X-ray fluorescence peaks of the surrounding materials. No indications of memory effects have been observed. A linear relation between the X-ray intensity and the tritium concentration was obtained and the lower detection limit of the setup has been determined to 1 MBq ml{sup -1}, assessed by the Curie criterion. In addition, the spectra obtained experimentally could be reproduced with high agreement by Monte-Carlo simulations using the GEANT4-tool-kit. It was found that the present detection system is applicable to non-invasive measurements of high-level tritiated water and the SDD is a convenient tool to detect the low energy Bremsstrahlung X-rays. (authors)« less

Automatic detection of measurement points for non-contact vibrometer-based diagnosis of cardiac arrhythmias

NASA Astrophysics Data System (ADS)

Metzler, Jürgen; Kroschel, Kristian; Willersinn, Dieter

2017-03-01

Monitoring of the heart rhythm is the cornerstone of the diagnosis of cardiac arrhythmias. It is done by means of electrocardiography which relies on electrodes attached to the skin of the patient. We present a new system approach based on the so-called vibrocardiogram that allows an automatic non-contact registration of the heart rhythm. Because of the contactless principle, the technique offers potential application advantages in medical fields like emergency medicine (burn patient) or premature baby care where adhesive electrodes are not easily applicable. A laser-based, mobile, contactless vibrometer for on-site diagnostics that works with the principle of laser Doppler vibrometry allows the acquisition of vital functions in form of a vibrocardiogram. Preliminary clinical studies at the Klinikum Karlsruhe have shown that the region around the carotid artery and the chest region are appropriate therefore. However, the challenge is to find a suitable measurement point in these parts of the body that differs from person to person due to e. g. physiological properties of the skin. Therefore, we propose a new Microsoft Kinect-based approach. When a suitable measurement area on the appropriate parts of the body are detected by processing the Kinect data, the vibrometer is automatically aligned on an initial location within this area. Then, vibrocardiograms on different locations within this area are successively acquired until a sufficient measuring quality is achieved. This optimal location is found by exploiting the autocorrelation function.

Cold Test Operation of the German VEK Vitrification Plant

DOE Office of Scientific and Technical Information (OSTI.GOV)

Fleisch, J.; Schwaab, E.; Weishaupt, M.

2008-07-01

In 2007 the German High-Level Liquid Waste (HLLW) Vitrification plant VEK (Verglasungseinrichtung Karlsruhe) has passed a three months integral cold test operation as final step before entering the hot phase. The overall performance of the vitrification process equipment with a liquid-fed ceramic glass melter as main component proved to be completely in line with the requirements of the regulatory body. The retention efficiency of main radioactive-bearing elements across melter and wet off-gas treatment system exceeded the design values distinctly. The strategy to produce a specified waste glass could be successfully demonstrated. The results of the cold test operation allow enteringmore » the next step of hot commissioning, i.e. processing of approximately 2 m{sup 3} of diluted HLLW. In summary: An important step of the VEK vitrification plant towards hot operation has been the performance of the cold test operation from April to July 2007. This first integral operation was carried out under boundary conditions and rules established for radioactive operation. Operation and process control were carried out following the procedure as documented in the licensed operational manuals. The function of the process technology and the safe operation could be demonstrated. No severe problems were encountered. Based on the positive results of the cold test, application of the license for hot operation has been initiated and is expected in the near future. (authors)« less

Analysis of Emission Effects Related to Drivers' Compliance Rates for Cooperative Vehicle-Infrastructure System at Signalized Intersections.

PubMed

Liao, Ruohua; Chen, Xumei; Yu, Lei; Sun, Xiaofei

2018-01-12

Unknown remaining time of signal phase at a signalized intersection generally results in extra accelerations and decelerations that increase variations of operating conditions and thus emissions. A cooperative vehicle-infrastructure system can reduce unnecessary speed changes by establishing communications between vehicles and the signal infrastructure. However, the environmental benefits largely depend on drivers' compliance behaviors. To quantify the effects of drivers' compliance rates on emissions, this study applied VISSIM 5.20 (Planung Transport Verkehr AG, Karlsruhe, Germany) to develop a simulation model for a signalized intersection, in which light duty vehicles were equipped with a cooperative vehicle-infrastructure system. A vehicle-specific power (VSP)-based model was used to estimate emissions. Based on simulation data, the effects of different compliance rates on VSP distributions, emission factors, and total emissions were analyzed. The results show the higher compliance rate decreases the proportion of VSP bin = 0, which means that the frequencies of braking and idling were lower and light duty vehicles ran more smoothly at the intersection if more light duty vehicles complied with the cooperative vehicle-infrastructure system, and emission factors for light duty vehicles decreased significantly as the compliance rate increased. The case study shows higher total emission reductions were observed with higher compliance rate for all of CO₂, NO x , HC, and CO emissions. CO₂ was reduced most significantly, decreased by 16% and 22% with compliance rates of 0.3 and 0.7, respectively.

A New Method Using Single-Particle Mass Spectrometry Data to Distinguish Mineral Dust and Biological Aerosols

NASA Astrophysics Data System (ADS)

Al-Mashat, H.; Kristensen, L.; Sultana, C. M.; Prather, K. A.

2016-12-01

The ability to distinguish types of particles present within a cloud is important for determining accurate inputs to climate models. The chemical composition of particles within cloud liquid droplets and ice crystals can have a significant impact on the timing, location, and amount of precipitation that falls. Precipitation efficiency is increased by the presence of ice crystals in clouds, and both mineral dust and biological aerosols have been shown to be effective ice nucleating particles (INPs) in the atmosphere. A current challenge in aerosol science is distinguishing mineral dust and biological material in the analysis of real-time, ambient, single-particle mass spectral data. Single-particle mass spectrometers are capable of measuring the size-resolved chemical composition of individual atmospheric particles. However, there is no consistent analytical method for distinguishing dust and biological aerosols. Sampling and characterization of control samples (i.e. of known identity) of mineral dust and bacteria were performed by the Aerosol Time-of-Flight Mass Spectrometer (ATOFMS) as part of the Fifth Ice Nucleation (FIN01) Workshop at the Aerosol Interaction and Dynamics in the Atmosphere (AIDA) facility in Karlsruhe, Germany. Using data collected by the ATOFMS of control samples, a new metric has been developed to classify single particles as dust or biological independent of spectral cluster analysis. This method, involving the use of a ratio of mass spectral peak areas for organic nitrogen and silicates, is easily reproducible and does not rely on extensive knowledge of particle chemistry or the ionization characteristics of mass spectrometers. This represents a step toward rapidly distinguishing particle types responsible for ice nucleation activity during real-time sampling in clouds. The ability to distinguish types of particles present within a cloud is important for determining accurate inputs to climate models. The chemical composition of particles

Civil Protection issues in urban management of natural hazards

NASA Astrophysics Data System (ADS)

Bostenaru, Maria; Georgescu, Sever; Goretti, Agostino; Markus, Michael

2010-05-01

This paper reviews different approaches of collaboration with the Civil Protection across Europe, from the experience of the author. The first contact came working as a research assistant at the Universität Karlsruhe (TH), Germany, in frame of the SFB (Collaborative Research Centre) 461 "Strong earthquakes", which featured a collaboration Germany-Romania. The subproject C7, where involved, about Novel Rescue technologies was a collaboration between the Institute for Technology and Management in Construction, formerly Institute for Construction Management and Machinery, and the Romanian Civil Protection. The scientific results of the project were to be lated implemented by the Civil Protection. In course of the work contacts were done also through the work of the research associate, sub-project leader, in the THW (German Technical Assistance). Later on work continued at the same institute but in frame of the Research Training Network "Natural Disasters" when also contacts with the Romanian representative to the European Earthquake Engineering Association, were established. Working further in the same field of Natural Disasters, especially seismic risk, brought the author to the ROSE School in Pavia, Italy, researches of which closely collaborate with the EUCENTRE, founded, among other institutions, by the Italian Civil Protection. Particularly the collaboration with specialists from the Italian Civil Protection resulted in several initiatives, such as: - paper contribution to a special issue edited by the author, - organisation of EGU sessions on the topic of "Natural Hazards' Impact on Urban Areas and Infrastructure", - invited review of papers, - attendance of short course coordinated at the ROSE School on post-earthquake safety assessment, - ellaboration of scientific projects submitted for funding on the topic of earthquake hazard impact at various geographic scales, - further publication collaborations are in work, - it is intended to improve the collaboration

EDITORIAL: TaCoNa-Photonics 2008 TaCoNa-Photonics 2008

NASA Astrophysics Data System (ADS)

Chigrin, Dmitry N.; Busch, Kurt; Lavrinenko, Andrei V.

2009-11-01

intensify theoretical discussions and to put them on `solid' ground it was decided to invite world-leading experts in experimental photonics for plenary talks. Over three days, the workshop has brought together more than 70 specialists in theoretical and computational nano-photonics. The workshop took place in the historical `Physikzentrum Bad Honnef', whose unique atmosphere supported a multitude of highly interesting debates and discussions that often lasted until midnight and beyond. Different theoretical and numerical aspects of light generation, control and detection in general inhomogeneous media, photonic crystals, plasmonic structures, metamaterials and integrated optical systems were covered in 15 invited talks and 52 contributed oral and posters presentations. The plenary talks were given by Professor M Wegener (metamaterials) and Professor W Barnes (plasmonics). This special section is a cross-sectional selection of papers which were submitted by the authors of invited and contributed oral presentations. It also includes two papers of the winners of the Best Poster Awards. We hope that these papers will enhance the interest of the scientific community regarding nano-photonics in general and regarding the TaCoNa-Photonics workshop series in particular. It is our distinct pleasure to acknowledge the generous financial support of our sponsors: Karlsruhe School of Optics & Photonics (KSOP) (Germany), U.S. Army International Technology Center-Atlantic, Research Division (USA), and the Office of Naval Research Global (USA). Without the organizational assistance from the International Department of the Universität Karlsruhe GmbH (Germany) this event would simply have been impossible.

A comparison of socio-economic loss analysis from the 2013 Haiyan Typhoon and Bohol Earthquake events in the Philippines in near real-time

NASA Astrophysics Data System (ADS)

Daniell, James; Mühr, Bernhard; Kunz-Plapp, Tina; Brink, Susan A.; Kunz, Michael; Khazai, Bijan; Wenzel, Friedemann

2014-05-01

economic losses. 4. After the initial estimate, damage patterns were examined and the loss estimates calibrated. The economic loss estimates of 9.5 billion USD capital stock and 4.1 billion USD GDP costs and the estimate of 2.1 million long term homeless from the Typhoon Haiyan event from the initial model proved very accurate with around the same values coming from reports around a month after the event. For the Bohol earthquake, the economic loss estimate was reasonable (around 100 million USD), however, the number of fatalities was slightly underestimated given the intensity field being underestimated and due to the number of landslide and other deaths (heart attacks etc.) in the first day. As the damage estimates were reported on post-disaster over the next days, the fatality function was calibrated and produced results closer to 200 deaths. Such parsimonious modelling in the aftermath of a disaster and socioeconomic profiling of the disaster area can prove useful to relief agencies and governments as well as those on the ground giving a first estimate of the extent of the damage and the models will as such continue to be developed in the course of FDA. Daniell J.E. (2014) The development of socio-economic fragility functions for use in worldwide rapid earthquake loss estimation procedures, Ph.D. Thesis (in publishing), Karlsruhe Institute of Technology, Karlsruhe, Germany.

A New Microstructure Device for Efficient Evaporation of Liquids

NASA Astrophysics Data System (ADS)

Brandner, Juergen J.; Maikowske, Stefan; Vittoriosi, Alice

Evaporation of liquids is of major interest for many topics in process engineering. One of these is chemical process engineering, where evaporation of liquids and generation of superheated steam is mandatory for numerous processes. Generally, this is performed by use of classical pool boiling and evaporation process equipment. Another possibility is creating mixtures of gases and liquids, combined with a heating of this haze. Both methods provide relatively limited performance. Due to the advantages of microstructure devices especially in chemical process engineering [1] the interest in microstructure evaporators and steam generators have been increased through the last decade. In this publication several microstructure devices used for evaporation and generation of steam as well as superheating will be described. Here, normally electrically powered devices containing micro channels as well as non-channel microstructures are used due to better controllability of the temperature level. Micro channel heat exchangers have been designed, manufactured and tested at the Institute for Micro Process Engineering of the Karlsruhe Institute of Technology for more than 15 years. Starting with the famous Karlsruhe Cube, a cross-flow micro channel heat exchanger of various dimensions, not only conventional heat transfer between liquids or gases have been theoretically and experimentally examined but also phase transition from liquids to gases (evaporation) and condensation of liquids. However, the results obtained with sealed microstructure devices have often been unsatisfying. Thus, to learn more onto the evaporation process itself, an electrically powered device for optical inspection of the microstructures and the processes inside has been designed and manufactured [2]. This was further optimized and improved for better controllability and reliable experiments [3]. Exchangeable metallic micro channel array foils as well as an optical inspection of the evaporation process by

Relaxometry in soil science

NASA Astrophysics Data System (ADS)

Schaumann, G. E.; Jaeger, F.; Bayer, J. V.

2009-04-01

-destructive way. Recent studies investigated wetting and swelling processes in soil samples, as well as the formation of microbial biofilms in soil the formation. This contribution gives an overview of current applications and the potential of NMR relaxometry in soil science with special emphasis on proton NMR relaxometry. References Bird, N.R.A., Preston, A.R., Randall, E.W., Whalley, W.R. & Whitmore, A.P. 2005. Measurement of the size distribution of water-filled pores at different matric potentials by stray field nuclear magnetic resonance. 56, 135-143. Bryar, T.R. & Knight, R.J. 2002. Sensitivity of Nuclear Magnetic Resonance Relaxation Measurements to Changing Soil Redox Conditions. Geophysical Research Letters, 29, 50/1-50/4. Conte, P., Spaccini, R. & Piccolo, A. 2006. Advanced CPMAS-13C NMR techniques for molecular characterization of size-separated fractions from a soil humic acid. Analytical and Bioanalytical Chemistry, 386, 382-390. Gunasekara, A.S., Simpson, M.I. & Xing, B. 2003. Identification and characterization of sorption domains in soil organic matter using strucuturally modified humic acids. Environmental Science & Technology, 37, 852-858. Jaeger, F., Grohmann, E., Boeckelmann, U. & Schaumann, G.E. 2006. Microbial effects on 1H NMR Relaxometry in soil samples and glass bead reactors. In Humic Substances - Linking Structure to Functions. Proceedings of the 13th Meeting of the International Humic Substances Societyin Karlsruhe eds. F.H. Frimmel & G. Abbt-Braun), pp. 929-932. Universität Karlsruhe, Karlsruhe. Hurraß, J. & Schaumann, G.E. 2007. Hydration kinetics of wettable and water repellent soil samples. Soil Science Society of America Journal, 71, 280-288. Jaeger, F., Grohmann, E. & Schaumann, G.E. 2006. 1H NMR Relaxometry in natural humous soil samples: Insights in microbial effects on relaxation time distributions. Plant and Soil, 280, 209-222. Jaeger, F., Rudolph, N., Lang, F. & Schaumann, G.E. 2008. Effects of soil solution's constituents on proton NMR

Transitional Boundary Layers Under the Influence of High Free Stream Turbulence, Intensive Wall Cooling and High Pressure Gradients in Hot Gas Circulation. Ph.D. Thesis - Technische Hochschule, Karlsruhe, 1985

NASA Technical Reports Server (NTRS)

Rued, Klaus

1987-01-01

The requirements for fundamental experimental studies of the influence of free stream turbulence, pressure gradients and wall cooling are discussed. Under turbine-like free stream conditions, comprehensive tests of transitional boundary layers with laminar, reversing and turbulent flow increments were performed to decouple the effects of the parameters and to determine the effects during mutual interaction.

On the aerodynamic forces of flapping finite-wings in forward flight: a numerical study

NASA Astrophysics Data System (ADS)

Gonzalo, Alejandro; Uhlmann, Markus; Garcia-Villalba, Manuel; Flores, Oscar

2017-11-01

We study the flow around two flapping wings in forward flight at a low Reynolds number, Re = 500 , with 3D direct numerical simulations. The flow solver used is TUCAN, an in-house code which solves the Navier-Stokes equations for incompressible flow using an immersed boundary method to model the presence of the wings. The wings are rectangular with a NACA0012 airfoil of chord c as a cross-section. They are located side by side at a distance 0.5 c between their inboard tips. The wings flap with respect to an axis parallel to the streamwise velocity, without pitching. The angle of rotation is defined using a sinusoidal function with a reduced frequency k = 1 and an amplitude such that the maximum height of the outboard tips is c in all cases. We perform several simulations varying the aspect ratio of the wings (AR = 2 and 4) and the distance between the inboard tip of the wings and the axis of rotation (R = 0 , 2 and ∞), the latter case corresponding to wings in heaving motion. In this way we can study the variation of the fictitious forces on the wings and the induced spanwise flows, and their relation to the vortical structures on the wing (i.e. leading edge vortex, trailing edge votex, tip vortices) and the resulting aerodynamic forces. This work was funded by project TRA2013-41103-P (Mineco/Feder UE). The simulations were partially performed at the Steinbuch Centre for Computing, Karlsruhe, whose support is thankfully acknowledged.

Towards a 20 kA high temperature superconductor current lead module using REBCO tapes

NASA Astrophysics Data System (ADS)

Heller, R.; Bagrets, N.; Fietz, W. H.; Gröner, F.; Kienzler, A.; Lange, C.; Wolf, M. J.

2018-01-01

Most of the large fusion devices presently under construction or in operation consisting of superconducting magnets like EAST, Wendelstein 7-X (W7-X), JT-60SA, and ITER, use high temperature superconductor (HTS) current leads (CL) to reduce the cryogenic load and operational cost. In all cases, the 1st generation HTS material Bi-2223 is used which is embedded in a low-conductivity matrix of AgAu. In the meantime, industry worldwide concentrates on the production of the 2nd generation HTS REBCO material because of the better field performance in particular at higher temperature. As the new material can only be produced in a multilayer thin-film structure rather than as a multi-filamentary tape, the technology developed for Bi-2223-based current leads cannot be transferred directly to REBCO. Therefore, several laboratories are presently investigating the design of high current HTS current leads made of REBCO. Karlsruhe Institute of Technology is developing a 20 kA HTS current lead using brass-stabilized REBCO tapes—as a further development to the Bi-2223 design used in the JT-60SA current leads. The same copper heat exchanger module as in the 20 kA JT-60SA current lead will be used for simplicity, which will allow a comparison of the newly developed REBCO CL with the earlier produced and investigated CL for JT-60SA. The present paper discusses the design and accompanying test of single tape and stack REBCO mock-ups. Finally, the fabrication of the HTS module using REBCO stacks is described.

Posttest calculations of bundle quench test CORA-13 with ATHLET-CD

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bestele, J.; Trambauer, K.; Schubert, J.D.

Gesellschaft fuer Anlagen- und Reaktorsicherheit is developing, in cooperation with the Institut fuer Kernenergetik und Energiesysteme, Stuttgart, the system code Analysis of Thermalhydraulics of Leaks and Transients with Core Degradation (ATHLET-CD). The code consists of detailed models of the thermal hydraulics of the reactor coolant system. This thermo-fluid dynamics module is coupled with modules describing the early phase of the core degradation, like cladding deformation, oxidation and melt relocation, and the release and transport of fission products. The assessment of the code is being done by the analysis of separate effect tests, integral tests, and plant events. The code willmore » be applied to the verification of severe accident management procedures. The out-of-pile test CORA-13 was conducted by Forschungszentrum Karlsruhe in their CORA test facility. The test consisted of two phases, a heatup phase and a quench phase. At the beginning of the quench phase, a sharp peak in the hydrogen generation rate was observed. Both phases of the test have been calculated with the system code ATHLET-CD. Special efforts have been made to simulate the heat losses and the flow distribution in the test facility and the thermal hydraulics during the quench phase. In addition to previous calculations, the material relocation and the quench phase have been modeled. The temperature increase during the heatup phase, the starting time of the temperature escalation, and the maximum temperatures have been calculated correctly. At the beginning of the quench phase, an increased hydrogen generation rate has been calculated as measured in the experiment.« less

Chemical and biological techniques for identifying irradiated foods and food constituents-carbonyls and 2-deoxygluconic acid

DOE Office of Scientific and Technical Information (OSTI.GOV)

Schubert, J.; Esterbauer, H.

1973-01-01

From international colloquium: the identification of irradiated foodstuffs; Karlsruhe, Germany (24 Oct 1973). New microbiological and chemical procedures are described for the detection, concentration, and identification of compounds produced in irradiated foods. The microbiological method employs an equation, by which inhibition of cell growth is expressed in a simple, economic, and consistent manner for identification of different classes of growth inhibitors using a single growth index, namely, concentration of substance at which time needed for log phase cells to double is ten times the controls. The chemical procedure permits carbonyl compounds to be spectrophotometrically determined in the presence of carbohydratesmore » without prior separation. The G(carbonyl) yields have been measured in irradiated hexoses and disaccharide solutions in the presence and absence of OH scavengers (KI and formate) and e/sub aq/ scavengers (N/sub 2/O). It has been demonstrated that the cytotoxic carbonyls produced upon carbohydrate irradiation are dicarbonyl sugars which convert to alpha , BETA -unsaturated carbonyl sugars by enolization or dehydration upon heating. Carbonyl yields in various irradiated foods are reported (e.g., strawberries: G = 2.2 and beef, G = 0.8). Both the carbonyl and microbiological techniques are uniquely applicable to the identification of non- volative compounds produced in irradiated foods. By anion exchange, we can rapidly separate enolizable carbonyls and 2-deoxygluconic acid from neutrnl sugars and obtain concentration factors of 50-fold and greater, thus enabling us to differentiate irradiated from nonirradiated foods at low radiation doses (approximately 1 Krad). (GE)« less

High resolution measurements of the {sup 241}Am(n,2n) reaction cross section

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sage, C.; European Commission, Joint Research Centre, Institute for Reference Materials and Measurements, Retieseweg 111, B-2440 Geel; Commissariat a L'Energie Atomique Cadarache, DEN/CAD/DER/SPRC/LEPh, F-13108 St Paul-lez-Durance

Measurements of the {sup 241}Am(n,2n) reaction cross section have been performed at the Joint Research Centre (JRC) Geel in the frame of a collaboration between the European Commission (EC) JRC and French laboratories from CNRS and the Commissariat a L'Energie Atomique (CEA) Cadarache. Raw material coming from the Atalante facility of CEA Marcoule has been transformed by JRC Karlsruhe into suitable {sup 241}AmO{sub 2} samples embedded in Al{sub 2}O{sub 3} matrices specifically designed for these measurements. The irradiations were carried out at the 7-MV Van de Graaff accelerator. The {sup 241}Am(n,2n) reaction cross section was determined relative to the {supmore » 27}Al(n,alpha){sup 24}Na standard cross section. The measurements were performed in four sessions, using quasi-mono-energetic neutrons with energies ranging from 8 to 21 MeV produced via the {sup 2}H(d,n){sup 3}He and the {sup 3}H(d,n){sup 4}He reactions. The induced activity was measured by standard gamma-ray spectrometry using a high-purity germanium detector. Below 15 MeV, the present results are in agreement with data obtained earlier. Above 15 MeV, these measurements allowed the experimental investigation of the {sup 241}Am(n,2n) reaction cross section for the first time. The present data are in good agreement with predictions obtained with the talys code that uses an optical and fission model developed at CEA.« less

MIPAS IMK/IAA carbon tetrachloride (CCl4) retrieval and first comparison with other instruments

NASA Astrophysics Data System (ADS)

Eckert, Ellen; von Clarmann, Thomas; Laeng, Alexandra; Stiller, Gabriele P.; Funke, Bernd; Glatthor, Norbert; Grabowski, Udo; Kellmann, Sylvia; Kiefer, Michael; Linden, Andrea; Babenhauserheide, Arne; Wetzel, Gerald; Boone, Christopher; Engel, Andreas; Harrison, Jeremy J.; Sheese, Patrick E.; Walker, Kaley A.; Bernath, Peter F.

2017-07-01

MIPAS thermal limb emission measurements were used to derive vertically resolved profiles of carbon tetrachloride (CCl4). Level-1b data versions MIPAS/5.02 to MIPAS/5.06 were converted into volume mixing ratio profiles using the level-2 processor developed at Karlsruhe Institute of Technology (KIT) Institute of Meteorology and Climate Research (IMK) and Consejo Superior de Investigaciones Científicas (CSIC), Instituto de Astrofísica de Andalucía (IAA). Consideration of peroxyacetyl nitrate (PAN) as an interfering species, which is jointly retrieved, and CO2 line mixing is crucial for reliable retrievals. Parts of the CO2 Q-branch region that overlap with the CCl4 signature were omitted, since large residuals were still found even though line mixing was considered in the forward model. However, the omitted spectral region could be narrowed noticeably when line mixing was accounted for. A new CCl4 spectroscopic data set leads to slightly smaller CCl4 volume mixing ratios. In general, latitude-altitude cross sections show the expected CCl4 features with highest values of around 90 pptv at altitudes at and below the tropical tropopause and values decreasing with altitude and latitude due to stratospheric decomposition. Other patterns, such as subsidence in the polar vortex during winter and early spring, are also visible in the distributions. The decline in CCl4 abundance during the MIPAS Envisat measurement period (July 2002 to April 2012) is clearly reflected in the altitude-latitude cross section of trends estimated from the entire retrieved data set.

Thunderstorm observations by air-shower radio antenna arrays

NASA Astrophysics Data System (ADS)

Apel, W. D.; Arteaga, J. C.; Bähren, L.; Bekk, K.; Bertaina, M.; Biermann, P. L.; Blümer, J.; Bozdog, H.; Brancus, I. M.; Buchholz, P.; Buitink, S.; Cantoni, E.; Chiavassa, A.; Daumiller, K.; de Souza, V.; di Pierro, F.; Doll, P.; Ender, M.; Engel, R.; Falcke, H.; Finger, M.; Fuhrmann, D.; Gemmeke, H.; Grupen, C.; Haungs, A.; Heck, D.; Hörandel, J. R.; Horneffer, A.; Huber, D.; Huege, T.; Isar, P. G.; Kampert, K.-H.; Kang, D.; Krömer, O.; Kuijpers, J.; Link, K.; Łuczak, P.; Ludwig, M.; Mathes, H. J.; Melissas, M.; Morello, C.; Nehls, S.; Oehlschläger, J.; Palmieri, N.; Pierog, T.; Rautenberg, J.; Rebel, H.; Roth, M.; Rühle, C.; Saftoiu, A.; Schieler, H.; Schmidt, A.; Schröder, F. G.; Sima, O.; Toma, G.; Trinchero, G. C.; Weindl, A.; Wochele, J.; Wommer, M.; Zabierowski, J.; Zensus, J. A.

2011-10-01

Relativistic, charged particles present in extensive air showers (EAS) lead to a coherent emission of radio pulses which are measured to identify the shower initiating high-energy cosmic rays. Especially during thunderstorms, there are additional strong electric fields in the atmosphere, which can lead to further multiplication and acceleration of the charged particles and thus have influence on the form and strength of the radio emission. For a reliable energy reconstruction of the primary cosmic ray by means of the measured radio signal it is very important to understand how electric fields affect the radio emission. In addition, lightning strikes are a prominent source of broadband radio emissions that are visible over very long distances. This, on the one hand, causes difficulties in the detection of the much lower signal of the air shower. On the other hand the recorded signals can be used to study features of the lightning development. The detection of cosmic rays via the radio emission and the influence of strong electric fields on this detection technique is investigated with the LOPES experiment in Karlsruhe, Germany. The important question if a lightning is initiated by the high electron density given at the maximum of a high-energy cosmic-ray air shower is also investigated, but could not be answered by LOPES. But, these investigations exhibit the capabilities of EAS radio antenna arrays for lightning studies. We report about the studies of LOPES measured radio signals of air showers taken during thunderstorms and give a short outlook to new measurements dedicated to search for correlations of lightning and cosmic rays.

Primary Energy Spectrum as Reconstructed from S(500) Measurements by KASCADE-Grande

NASA Astrophysics Data System (ADS)

Toma, G.; Apel, W. D.; Arteaga, J. C.; Badea, F.; Bekk, K.; Bertaina, M.; Blümer, J.; Bozdog, H.; Brancus, I. M.; Brüggemann, M.; Buchholz, P.; Cantoni, E.; Chiavassa, A.; Cossavella, F.; Daumiller, K.; de Souza, V.; Di Pierro, F.; Doll, P.; Engel, R.; Engler, J.; Finger, M.; Fuhrmann, D.; Ghia, P. L.; Gils, H. J.; Glasstetter, R.; Grupen, C.; Haungs, A.; Heck, D.; Hörandel, J. R.; Huege, T.; Isar, P. G.; Kampert, K.-H.; Kang, D.; Kickelbick, D.; Klages, H. O.; Łuczak, P.; Mathes, H. J.; Mayer, H. J.; Milke, J.; Mitrica, B.; Morello, C.; Navarra, G.; Nehls, S.; Oehlschläger, J.; Ostapchenko, S.; Over, S.; Petcu, M.; Pierog, T.; Rebel, H.; Roth, M.; Schieler, H.; Schröder, F.; Sima, O.; Stümpert, M.; Trinchero, G. C.; Ulrich, H.; Weindl, A.; Wochele, J.; Wommer, M.; Zabierowski, J.

2010-01-01

In cosmic ray investigations by observations of extensive air showers (EAS) the general question arises how to relate the registered EAS observables to the energy of the primary particle from the cosmos entering into the atmosphere. We present results on the reconstruction of the primary energy spectrum of cosmic rays from the experimentally recorded S(500) observable using the KASCADE-Grande detector array. The KASCADE-Grande experiment is installed in Forschungszentrum Karlsruhe, Germany, and driven by an international collaboration. Previous EAS investigations have shown that for a fixed energy the charged particle density becomes independent of the primary mass at certain distances from the shower core. This feature can be used as an estimator for the primary energy. The particular radial distance from the shower core where this effect shows up is a characteristic of the detector. For the KASCADE-Grande experiment it was shown to be around 500 m, hence a notation S(500). Extensive simulation studies have shown that S(500) is mapping the primary energy. The constant intensity cut (CIC) method is applied to evaluate the attenuation of the S(500) observable with the zenith angle. An attenuation correction is applied and all recorded S(500) values are corrected for attenuation. A calibration of S(500) values with the primary energy has been worked out by simulations and was used for conversion providing the possibility to obtain the primary energy spectrum (in the energy range accessible to KASCADE-Grande 1010-1018 eV). The systematic uncertainties induced by different factors are considered.

Rotating optical geometry sensor for inner pipe-surface reconstruction

NASA Astrophysics Data System (ADS)

Ritter, Moritz; Frey, Christan W.

2010-01-01

The inspection of sewer or fresh water pipes is usually carried out by a remotely controlled inspection vehicle equipped with a high resolution camera and a lightning system. This operator-oriented approach based on offline analysis of the recorded images is highly subjective and prone to errors. Beside the subjective classification of pipe defects through the operator standard closed circuit television (CCTV) technology is not suitable for detecting geometrical deformations resulting from e.g. structural mechanical weakness of the pipe, corrosion of e.g. cast-iron material or sedimentations. At Fraunhofer Institute of Optronics, System Technologies and Image Exploitation (IOSB) in Karlsruhe, Germany, a new Rotating Optical Geometry Sensor (ROGS) for pipe inspection has been developed which is capable of measuring the inner pipe geometry very precisely over the whole pipe length. This paper describes the developed ROGS system and the online adaption strategy for choosing the optimal system parameters. These parameters are the rotation and traveling speed dependent from the pipe diameter. Furthermore, a practicable calibration methodology is presented which guarantees an identification of the several internal sensor parameters. ROGS has been integrated in two different systems: A rod based system for small fresh water pipes and a standard inspection vehicle based system for large sewer Pipes. These systems have been successfully applied to different pipe systems. With this measurement method the geometric information can be used efficiently for an objective repeatable quality evaluation. Results and experiences in the area of fresh water pipe inspection will be presented.

Adapted hydropower-driven water supply system: assessment of an underground application in an Indonesian karst area

NASA Astrophysics Data System (ADS)

Oberle, P.; Ikhwan, M.; Stoffel, D.; Nestmann, F.

2016-09-01

Populated karst landscapes can be found all over the world, although their natural boundary conditions mostly lead to distinct challenges regarding a sustainable water supply. Especially in developing and emerging countries, this situation aggravates since appropriate technologies and water management concepts are rarely available. Against this background, the interdisciplinary, German-Indonesian joint project " Integrated Water Resources Management (IWRM) Indonesia", funded by the German Federal Ministry of Education and Research (BMBF), focused on the development and exemplary implementation of adapted techniques to remedy the partly severe water scarcity in the region Gunung Sewu. This karst area, widely known as " Java's poorhouse", is located on the southern coast of Java Island and distinctly suffers from the mentioned constraints. Under the aegis of the Karlsruhe Institute of Technology (KIT), the conceptual and technical achievements of the "IWRM Indonesia" joint research project are characterized by a high potential for multiplication not only for karst areas but also for non-karst regions. One of the project's major accomplishments is the erection of an innovative hydropower-driven water supply facility located in a karst cave 100 m below ground and continuously supplying tens of thousands of people with fresh water. Referring to the plant's innovative character and the demanding conditions on-site, the implementation was a highly iterative process leading to today's autonomous operation by an Indonesian public authority. Based on the experiences gained during design, construction, operation and monitoring phase, this paper introduces an implementation approach for adapted technologies as well as a comprising technical and economical assessment of the plant's operation.

Stability of anthocyanin-rich w/o/w-emulsions designed for intestinal release in gastrointestinal environment.

PubMed

Frank, Kerstin; Walz, Elke; Gräf, Volker; Greiner, Ralf; Köhler, Karsten; Schuchmann, Heike Petra

2012-12-01

Anthocyanins belong to the most important hydrophilic plant pigments. Outside their natural environment, these molecules are extremely unstable. Encapsulating them in submicron-sized containers is one possibility to stabilize them for the use in bioactivity studies or functional foods. The containers have to be designed for a target release in the human gastrointestinal system. In this contribution, an anthocyanin-rich bilberry extract was encapsulated in the inner aqueous phase of water-in-oil-in-water-double emulsions. The physical stability as well as the release of free fatty acids and encapsulated, bioactive substances from the emulsions during an in vitro gastrointestinal passage were investigated. The focus was on the influence of emulsion microstructural parameters (for example, inner and outer droplet size, disperse phase content) and required additives (emulsifier systems), respectively. It could be shown that it is possible to stabilize anthocyanins in the inner phase of double emulsions. The release rate of free fatty acids during incubation was independent of the emulsifier used. However, the exterior (O/W)-emulsifier has an impact on the stability of multiple emulsions in gastrointestinal environment and, thus, the location of release. Long-chained emulsifiers like whey proteins are most suitable to transport a maximum amount of bioactive substances to the effective location, being the small intestine for anthocyanins. In addition, it was shown that the dominating release mechanism for entrapped matter was coalescence of the interior W(1) -droplets with the surrounding W(2) -phase. © 2012 Institute of Process Engineering in Life Science I: Food Process Engineering, Karlsruhe Institute of Technology (KIT).

New Features of the re3data Registry of Research Data Repositories

NASA Astrophysics Data System (ADS)

Elger, K.; Pampel, H.; Vierkant, P.; Witt, M.

2016-12-01

re3data is a registry of research data repositories that lists over 1,600 repositories from around the world, making it the largest and most comprehensive online catalog of data repositories on the web. The registry offers researchers, funding agencies, libraries and publishers a comprehensive overview of the heterogeneous landscape of data repositories. The repositories are described, following the "Metadata Schema for the Description of Research Data Repositories". re3data summarises the properties of a repository into a user-friendly icon system helping users to easily identify an adequate repository for the storage of their datasets. The re3data entries are curated by an international, multi-disciplinary editorial board. An application programming interface (API) enables other information systems to list and fetch metadata for integration and interoperability. Funders like the European Commission (2015) and publishers like Springer Nature (2016) recommend the use of re3data.org in their policies. The original re3data project partners are the GFZ German Research Centre for Geosciences, the Humboldt-Universität zu Berlin, the Purdue University Libraries and the Karlsruhe Institute of Technology (KIT). Since 2015 re3data is operated as a service of DataCite, a global non-profit organisation that provides persistent identifiers (DOIs) for research data. At the 2016 AGU Fall Meeting we will describe the current status of re3data. An overview of the major developments and new features will be given. Furthermore, we will present our plans to increase the quality of the re3data entries.

Thermo-mechanical Modelling of Pebble Beds in Fusion Blankets and its Implementation by a Return-Mapping Algorithm

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gan, Yixiang; Kamlah, Marc

In this investigation, a thermo-mechanical model of pebble beds is adopted and developed based on experiments by Dr. Reimann at Forschungszentrum Karlsruhe (FZK). The framework of the present material model is composed of a non-linear elastic law, the Drucker-Prager-Cap theory, and a modified creep law. Furthermore, the volumetric inelastic strain dependent thermal conductivity of beryllium pebble beds is taken into account and full thermo-mechanical coupling is considered. Investigation showed that the Drucker-Prager-Cap model implemented in ABAQUS can not fulfill the requirements of both the prediction of large creep strains and the hardening behaviour caused by creep, which are of importancemore » with respect to the application of pebble beds in fusion blankets. Therefore, UMAT (user defined material's mechanical behaviour) and UMATHT (user defined material's thermal behaviour) routines are used to re-implement the present thermo-mechanical model in ABAQUS. An elastic predictor radial return mapping algorithm is used to solve the non-associated plasticity iteratively, and a proper tangent stiffness matrix is obtained for cost-efficiency in the calculation. An explicit creep mechanism is adopted for the prediction of time-dependent behaviour in order to represent large creep strains in high temperature. Finally, the thermo-mechanical interactions are implemented in a UMATHT routine for the coupled analysis. The oedometric compression tests and creep tests of pebble beds at different temperatures are simulated with the help of the present UMAT and UMATHT routines, and the comparison between the simulation and the experiments is made. (authors)« less

DOE Office of Scientific and Technical Information (OSTI.GOV)

Witte, Jonathon; Molecular Foundry, Lawrence Berkeley National Laboratory, Berkeley, California 94720; Neaton, Jeffrey B.

With the aim of systematically characterizing the convergence of common families of basis sets such that general recommendations for basis sets can be made, we have tested a wide variety of basis sets against complete-basis binding energies across the S22 set of intermolecular interactions—noncovalent interactions of small and medium-sized molecules consisting of first- and second-row atoms—with three distinct density functional approximations: SPW92, a form of local-density approximation; B3LYP, a global hybrid generalized gradient approximation; and B97M-V, a meta-generalized gradient approximation with nonlocal correlation. We have found that it is remarkably difficult to reach the basis set limit; for the methodsmore » and systems examined, the most complete basis is Jensen’s pc-4. The Dunning correlation-consistent sequence of basis sets converges slowly relative to the Jensen sequence. The Karlsruhe basis sets are quite cost effective, particularly when a correction for basis set superposition error is applied: counterpoise-corrected def2-SVPD binding energies are better than corresponding energies computed in comparably sized Dunning and Jensen bases, and on par with uncorrected results in basis sets 3-4 times larger. These trends are exhibited regardless of the level of density functional approximation employed. A sense of the magnitude of the intrinsic incompleteness error of each basis set not only provides a foundation for guiding basis set choice in future studies but also facilitates quantitative comparison of existing studies on similar types of systems.« less

Analysis and visualization of intracardiac electrograms in diagnosis and research: Concept and application of KaPAVIE.

PubMed

Oesterlein, Tobias Georg; Schmid, Jochen; Bauer, Silvio; Jadidi, Amir; Schmitt, Claus; Dössel, Olaf; Luik, Armin

2016-04-01

Progress in biomedical engineering has improved the hardware available for diagnosis and treatment of cardiac arrhythmias. But although huge amounts of intracardiac electrograms (EGMs) can be acquired during electrophysiological examinations, there is still a lack of software aiding diagnosis. The development of novel algorithms for the automated analysis of EGMs has proven difficult, due to the highly interdisciplinary nature of this task and hampered data access in clinical systems. Thus we developed a software platform, which allows rapid implementation of new algorithms, verification of their functionality and suitable visualization for discussion in the clinical environment. A software for visualization was developed in Qt5 and C++ utilizing the class library of VTK. The algorithms for signal analysis were implemented in MATLAB. Clinical data for analysis was exported from electroanatomical mapping systems. The visualization software KaPAVIE (Karlsruhe Platform for Analysis and Visualization of Intracardiac Electrograms) was implemented and tested on several clinical datasets. Both common and novel algorithms were implemented which address important clinical questions in diagnosis of different arrhythmias. It proved useful in discussions with clinicians due to its interactive and user-friendly design. Time after export from the clinical mapping system to visualization is below 5min. KaPAVIE(2) is a powerful platform for the development of novel algorithms in the clinical environment. Simultaneous and interactive visualization of measured EGM data and the results of analysis will aid diagnosis and help understanding the underlying mechanisms of complex arrhythmias like atrial fibrillation. Copyright © 2015 Elsevier Ireland Ltd. All rights reserved.

The ECRH/ECCD system on Tore Supra, a major step towards continuous operation

NASA Astrophysics Data System (ADS)

Lennholm, M.; Agarici, G.; Berger-By, G.; Bosia, P.; Bouquey, F.; Cellier, E.; Clary, J.; Clapit, M.; Darbos, C.; Giruzzi, G.; Jung, M.; Magne, R.; Roux, D.; Segui, J. L.; Traisnel, E.; Zou, X.

2003-11-01

The 118 GHz electron cyclotron heating and current drive (ECRH/ECCD) system under development in Cadarache, France, for use on the Tore Supra tokamak (Pain M. et al 1994 Proc. 18th SOFT (Karlsruhe) pp 481 4: Darbos C. et al 2000 Proc. 21st SOFT (Madrid) pp 605 9), is designed to launch 2.4 MW of power for up to 10 min into the plasma. At present two out of six gyrotrons are installed and available for injection of up to 800 kW. This paper concentrates on the generation and transmission of the ECRH/ECCD power for very long pulse operation. The power is injected into the plasma as Gaussian beams by an antenna which, using actively cooled mirrors inside the Tore Supra vacuum vessel, allows extensive control of both the poloidal and toroidal injection angles. The toroidal field on Tore Supra is normally in the range of 3.8 4 T, which for 118 GHz gives almost central deposition at the fundamental electron cyclotron resonance. A pair of actively cooled corrugated mirrors is installed in each matching optics unit at the output of each gyrotron allowing complete control of the polarization of the wave transmitted to the antenna, with the result that pure O-mode—or pure X-mode—power injection can be achieved for all injection angles. In tokamak experiments, a world record energy of 17.8 MJ has been injected into the plasma. New upgraded gyrotrons specified to produce 400 kW for up to 10 min will be introduced over the next 3 4 years.

Adaptive pattern for autonomous UAV guidance

NASA Astrophysics Data System (ADS)

Sung, Chen-Ko; Segor, Florian

2013-09-01

The research done at the Fraunhofer IOSB in Karlsruhe within the AMFIS project is focusing on a mobile system to support rescue forces in accidents or disasters. The system consists of a ground control station which has the capability to communicate with a large number of heterogeneous sensors and sensor carriers and provides several open interfaces to allow easy integration of additional sensors into the system. Within this research we focus mainly on UAV such as VTOL (Vertical takeoff and Landing) systems because of their ease of use and their high maneuverability. To increase the positioning capability of the UAV, different onboard processing chains of image exploitation for real time detection of patterns on the ground and the interfacing technology for controlling the UAV from the payload during flight were examined. The earlier proposed static ground pattern was extended by an adaptive component which admits an additional visual communication channel to the aircraft. For this purpose different components were conceived to transfer additive information using changeable patterns on the ground. The adaptive ground pattern and their application suitability had to be tested under external influence. Beside the adaptive ground pattern, the onboard process chains and the adaptations to the demands of changing patterns are introduced in this paper. The tracking of the guiding points, the UAV navigation and the conversion of the guiding point positions from the images to real world co-ordinates in video sequences, as well as use limits and the possibilities of an adaptable pattern are examined.

The KIT Motion-Language Dataset.

PubMed

Plappert, Matthias; Mandery, Christian; Asfour, Tamim

2016-12-01

Linking human motion and natural language is of great interest for the generation of semantic representations of human activities as well as for the generation of robot activities based on natural language input. However, although there have been years of research in this area, no standardized and openly available data set exists to support the development and evaluation of such systems. We, therefore, propose the Karlsruhe Institute of Technology (KIT) Motion-Language Dataset, which is large, open, and extensible. We aggregate data from multiple motion capture databases and include them in our data set using a unified representation that is independent of the capture system or marker set, making it easy to work with the data regardless of its origin. To obtain motion annotations in natural language, we apply a crowd-sourcing approach and a web-based tool that was specifically build for this purpose, the Motion Annotation Tool. We thoroughly document the annotation process itself and discuss gamification methods that we used to keep annotators motivated. We further propose a novel method, perplexity-based selection, which systematically selects motions for further annotation that are either under-represented in our data set or that have erroneous annotations. We show that our method mitigates the two aforementioned problems and ensures a systematic annotation process. We provide an in-depth analysis of the structure and contents of our resulting data set, which, as of October 10, 2016, contains 3911 motions with a total duration of 11.23 hours and 6278 annotations in natural language that contain 52,903 words. We believe this makes our data set an excellent choice that enables more transparent and comparable research in this important area.

Hydrogen combustion in a flat semi-confined layer with respect to the Fukushima Daiichi accident

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kuznetsov, M.; Yanez, J.; Grune, J.

2012-07-01

The hydrogen accumulation at the top of containment or reactor building may occur due to an interaction of molten corium and water followed by a severe accident of a nuclear reactor (TMI, Chernobyl, Fukushima Daiichi). The hydrogen, released from the reactor, accumulates usually as a stratified semi-confined layer of hydrogen-air mixture. A series of large scale experiments on hydrogen combustion and explosion in a semi-confined layer of uniform and non-uniform hydrogen-air mixtures in presence of obstructions or without them was performed at the Karlsruhe Inst. of Technology (KIT). Different flame propagation regimes from slow subsonic to relative fast sonic flamesmore » and then to the detonations were experimentally investigated in different geometries and then simulated with COMSD code with respect to evaluate amount of burnt hydrogen taken place during the Fukushima Daiichi Accident (FDA). The experiments were performed in a horizontal semi-confined layer with dimensions of 9x3x0.6 m with/without obstacles opened from below. The hydrogen concentration in the mixtures with air was varied in the range of 0-34 vol. % without or with a gradient of 0-60 vol. %H{sub 2}/m. Effects of hydrogen concentration gradient, thickness of the layer, geometry of the obstructions, average and maximum hydrogen concentration on flame propagation regimes were investigated with respect to evaluate the maximum pressure loads of internal structures. Blast wave strength and dynamics of propagation after explosion of the layer of hydrogen-air mixture was numerically simulated to reproduce the hydrogen explosion process during the Fukushima Daiichi Accident. (authors)« less

The measurement of the cosmic ray primary energy spectrum at 1016-1018 eV with the KASCADE-Grande experiment

NASA Astrophysics Data System (ADS)

Cantoni, Elena; Apel, W. D.; Arteaga-Velázquez, J. C.; Bekk, K.; Bertaina, M.; Blümer, J.; Bozdog, H.; Brancus, I. M.; Buchholz, P.; Chiavassa, A.; Cossavella, F.; Daumiller, K.; de Souza, V.; di Pierro, F.; Doll, P.; Engel, R.; Engler, J.; Finger, M.; Fuhrmann, D.; Ghia, P. L.; Gils, H. J.; Glasstetter, R.; Grupen, C.; Haungs, A.; Heck, D.; Hörandel, J. R.; Huege, T.; Isar, P. G.; Kampert, K.-H.; Kang, D.; Kickelbick, D.; Klages, H. O.; Link, K.; Łuczak, P.; Ludwig, M.; Mathes, H. J.; Mayer, H. J.; Melissas, M.; Milke, J.; Mitrica, B.; Morello, C.; Navarra, G.; Nehls, S.; Oehlschläger, J.; Ostapchenko, S.; Over, S.; Palmieri, N.; Petcu, M.; Pierog, T.; Rebel, H.; Roth, M.; Schieler, H.; Schröder, F. G.; Sima, O.; Toma, G.; Trinchero, G. C.; Ulrich, H.; Weindl, A.; Wochele, J.; Wommer, M.; Zabierowski, J.

2011-03-01

The KASCADE-Grande experiment operates at Karlsruhe Institute of Technology (KIT) in Germany. It's aim is the study of the primary cosmic radiation, through Extensive Air Shower detection, in the range 1016-1018 eV. Here, measurements are of main interest to understand the high energy evolution of cosmic radiation: a change in the slope of the heavy primary spectrum is expected (as measured at lower energies for lighter primaries) as a possible confirmation of the predicted astrophysical mechanisms; moreover, in this range the transition from galactic to extragalactic radiation is supposed to take place and the observations could clarify the features of this transition, putting the basis for the interpretation of the data at the highest energies. For these tasks KASCADE-Grande fulfills very well the requirements, both concerning the acceptance and the experimental performances. The experiment is constituted by two co-operating arrays of detectors: the KASCADE array, with its 252 detectors in a dense grid of 200×200 m2 and the Grande array, made of 37 detectors arranged on a wider area of 700×700 m2. The Grande array samples the total charged particles size of the air shower, while the KASCADE array provides the muon size In this contribution, KASCADE-Grande measurement of the cosmic ray primary energy spectrum is presented. The exploited technique, calibrated with simulations, combines the charged particles component and muon component on a shower by shower basis, performing the energy estimation of each primary event. Other techniques are also performed, for a better evaluation of systematics and a check of consistency of the hadronic interaction model used in simulations.

Chemical species of sulfur in prostate cancer cells studied by XANES spectroscopy

NASA Astrophysics Data System (ADS)

Czapla, Joanna; Kwiatek, Wojciech M.; Lekki, Janusz; Dulińska-Litewka, Joanna; Steininger, Ralph; Göttlicher, Jörg

2013-12-01

The role of sulfur in prostate cancer progression may be significant for understanding the process of carcinogenesis. This work, based on X-ray Absorption Near Edge Structure (XANES) spectroscopy, is focused on determination of sulfur chemical species occurring in prostate cancer cell lines. The experimental material consisted of four commercially available cell lines: three from metastasized prostate cancer (PC3, LNCaP, and DU145) and one, used as a control, from the non-tumourigenic peripheral zone of the prostate (PZ-HPV-7). The experiment was performed at the SUL-X beamline of the synchrotron radiation source ANKA, Karlsruhe (Germany). The K-edge XANES spectra of sulfur were analyzed by deconvolution in order to establish sulfur species that occur in prostate cancer cells and to find out whether there are any differences in their content between various cell lines. Experimental spectra were fitted in two ways: with two Gaussian peaks and one arctangent step function, and additionally by a Linear Combination Fit with spectra of reference compounds in order to obtain quantitative chemical information. All fitting procedures were performed with the Athena code (Ravel and Newville, 2005) and the results of deconvolution were used to determine the fraction of each sulfur form. The results of data analysis showed that cell lines from different metastasis had different ratio of reduced to oxidized sulfur species. The LCF analysis demonstrated that the highest content of GSH, one of the most important sulfur-bearing compounds in cells, was observed in DU145 cells. These findings may confirm the hypothesis of changes in redox balance in case of cancer initiation and progression.

Gradient Measurements of Nitrous Acid (hono)

NASA Astrophysics Data System (ADS)

Kleffmann, J.; Kurtenbach, R.; Lörzer, J.; Wiesen, P.; Kalthoff, N.; Vogel, B.; Vogel, H.

Nitrous acid (HONO) plays an important role in photochemical air pollution due to its photodissociation by solar UV radiation into hydroxyl radicals and thus significantly enhances photooxidation processes. Furthermore, HONO is an important indoor pol- lutant, which can react with amines leading to nitrosamines, which are known to be carcinogenic. Despite its importance in atmospheric chemistry the mechanisms lead- ing to HONO formation are still not completely understood at present. Although it is commonly proposed that HONO is formed by heterogeneous processes, i.e. by the conversion of NO2 on wet surfaces, it is still under discussion whether HONO produc- tion is dominated by the surface of particles or by the ground surface. Simultaneous vertical profile measurements of HONO, the precursor NO2 and the aerosol surface area, which could answer this question are not available at present. Accordingly, in the present study night-time HONO, NO2 and particle surface area gradients in the altitude range 10-190 m were measured on the meteorological tower at the Forschungszentrum Karlsruhe/Germany using a new, very sensitive HONO in- strument (LOPAP), a commercial NOx monitor and a SMPS system. For all gradient measurements during the campaign it was observed that the [HONO]/[NO2] ratio decreased with increasing altitude. In contrast, the particle sur- face area was found to be more or less constant. Accordingly, no correlation between the [HONO]/[NO2] ratio and the particle surface area was observed showing that HONO formation was dominated by processes on ground surfaces and that signifi- cant HONO formation on particle surfaces could be excluded for the measurement site.

Ambient and laboratory measurements of ice nuclei and their biological faction with the Fast Ice Nuclei CHamber FINCH-HALO using the new 405nm Version of the BIO-IN Sensor

NASA Astrophysics Data System (ADS)

Bundke, U.; Nillius, B.; Bingemer, H.; Curtius, J.

2012-04-01

We have designed the BIO-IN detector as part of the ice nucleus counter FINCH (Fast Ice Nuclei CHamber counter) to distinguish activated Ice Nuclei (IN) ice crystals from water droplets (CCN) (Bundke et al. 2008) and their fraction of biological origin (Bundke 2010). The modified BIO-IN sensor illuminates an aerosol stream with a 405 nm laser, replacing a 365nm LED of the original BIO IN design. Particles will scatter the light and those of biological origin will show intrinsic fluorescence emissions by excitation of mainly Riboflavin, also known as vitamin B2. The incident laser light is circularly polarized by introducing a quarter-wave-plate. The circular depolarization ratio (p44/p11) of the scattering matrix is measured in the backward direction by two photomultipliers at 110° scattering angle using a combination of quarter-wave-plate and a beam splitting cube to analyze the two circular polarization components. The detection limit was lowered towards particle size of about 400nm diameter (non activated particles). It is now possible to calculate the activated fraction of IN of biological origin with respect to all biological particles measured with one detector. The performance of the sensor will be demonstrated showing the circular- depolarization properties of different test aerosol, dust samples, volcanic ashes as well as different biological particles. Measurements on the mountain Puy de Dôme of IN number concentration of ambient air, as well as measurements at the AIDA facility in Karlsruhe of the IN activation curves from different bacteria are shown. Acknowledgements: This work was supported by the German Research Foundation, Grant: BU 1432/3-2 BU 1432/4-1

Roebel cables from REBCO coated conductors: a one-century-old concept for the superconductivity of the future

NASA Astrophysics Data System (ADS)

Goldacker, Wilfried; Grilli, Francesco; Pardo, Enric; Kario, Anna; Schlachter, Sonja I.; Vojenčiak, Michal

2014-09-01

Energy applications employing high-temperature superconductors (HTS), such as motors/generators, transformers, transmission lines and fault current limiters, are usually operated in the alternate current (ac) regime. In order to be efficient, the HTS devices need to have a sufficiently low value of ac loss, in addition to the necessary current-carrying capacity. Most applications are operated with currents beyond the current capacity of single conductors and consequently require cabled conductor solutions with much higher current carrying capacity, from a few kA up to 20-30 kA for large hydro-generators. A century ago, in 1914, Ludwig Roebel invented a low-loss cable design for copper cables, which was successively named after him. The main idea behind Roebel cables is to separate the current in different strands and to provide a full transposition of the strands along the cable direction. Nowadays, these cables are commonly used in the stator of large generators. Based on the same design concept of their conventional material counterparts, HTS Roebel cables from REBCO coated conductors were first manufactured at the Karlsruhe Institute of Technology and have been successively developed in a number of varieties that provide all the required technical features such as fully transposed strands, high transport currents and low ac losses, yet retaining enough flexibility for a specific cable design. In the past few years a large number of scientific papers have been published on the concept, manufacturing and characterization of such cables. Therefore it is timely for a review of those results. The goal is to provide an overview and a succinct and easy-to-consult guide for users, developers, and manufacturers of this kind of HTS cable.

Experimental results of the 140 GHz, 1 MW long-pulse gyrotron for W7-X

NASA Astrophysics Data System (ADS)

Koppenburg, K.; Arnold, A.; Borie, E.; Dammertz, G.; Giguet, E.; Heidinger, R.; Illy, S.; Kuntze, M.; Le Cloarec, G.; Legrand, F.; Leonhardt, W.; Lievin, C.; Neffe, G.; Piosczyk, B.; Schmid, M.; Thumm, M.

2003-02-01

Gyrotrons at high frequency with high output power are mainly developed for microwave heating and current drive in plasmas for thermonuclear fusion. For the stellarator Wendelstein 7-X now under construction at IPP Greifswald, Germany, a 10 MW ECRH system is foreseen. A 1 MW, 140 GHz long-pulse gyrotron has been designed and a pre-prototype (Maquette) has been constructed and tested in an European collaboration between FZK Karlsruhe, CRPP Lausanne, IPF Suttgart, IPP Greifswald, CEA Cadarache and TED Vélizy [1]. The cylindrical cavity is designed for operating in the TE28,8 mode. It is a standard tapered cavity with linear input downtaper and a non-linear uptaper. The diameter of the cylindrical part is 40.96 mm. The transitions between tapers and straight section are smoothly rounded to avoid mode conversion. The TE28,8-cavity mode is transformed to a Gaussian TEM0,0 output mode by a mode converter consisting of a rippled-wall waveguide launcher followed by a three mirror system. The output window uses a single, edge cooled CVD-diamond disk with an outer diameter of 106 mm, a window aperture of 88 mm and a thickness of 1.8 mm corresponding to four half wavelengths. The collector is at ground potential, and a depression voltage for energy recovery can be applied to the cavity and to the first two mirrors. Additional normal-conducting coils are employed to the collector in order to produce an axial magnetic field for sweeping the electron beam with a frequency of 7 Hz. A temperature limited magnetron injection gun without intermediate anode ( diode type ) is used. In short pulse operation at the design current of 40 A an output power of 1 MW could be achieved for an accelerating voltage of 82 kV without depression voltage and with a depression voltage of 25 kV an output power of 1.15 MW at an accelerating voltage of 84 kV has been measured. For these values an efficiency of 49% was obtained. At constant accelerating voltages, the output power did not change up to

Report for borehole explosion data acquired in the 1999 Los Angeles Region Seismic Experiment (LARSE II), Southern California: Part I, description of the survey

USGS Publications Warehouse

Fuis, Gary S.; Murphy, Janice M.; Okaya, David A.; Clayton, Robert W.; Davis, Paul M.; Thygesen, Kristina; Baher, Shirley A.; Ryberg, Trond; Benthien, Mark L.; Simila, Gerry; Perron, J. Taylor; Yong, Alan K.; Reusser, Luke; Lutter, William J.; Kaip, Galen; Fort, Michael D.; Asudeh, Isa; Sell, Russell; Van Schaack, John R.; Criley, Edward E.; Kaderabek, Ronald; Kohler, Will M.; Magnuski, Nickolas H.

2001-01-01

explosions and vibrating-truck sources onshore. The two chief LARSE transects pass near recent moderate earthquakes, including the 1971 M 6.7 San Fernando, 1987 M 5.9 Whittier Narrows, 1991 M 5.8 Sierra Madre, and 1994 M 6.7 Northridge earthquakes. The first transect extended from San Clemente Island northeastward to the Mojave Desert (Line 1, Fig. 1), passing near the epicenter of the Whittier Narrows and Sierra Madre earthquakes. The second transect extended from west of San Clemente Island northward to the western Mojave Desert (Line 2, Figs. 1, 2), passing through the epicenter of the Northridge earthquake and near the epicenter of the San Fernando earthquake. Data along Line 1 were acquired during the years 1993-1994, and data along Line 2, during the years 1994–2000. In this open-file report and that of Murphy and others (in preparation), we present the details of the October 1999 explosion survey along Line 2, which extended from Santa Monica Bay northward to the western Mojave Desert (Figs. 1, 2). This survey is referred to as LARSE II. In this survey, 93 borehole explosions were detonated along the main north-south line and along 5 auxiliary lines in the San Fernando Valley and Santa Monica areas. These explosions were recorded by ~1400 seismographs. A variety of seismic instrumentation was used in these imaging surveys and was obtained from collaborators from around the world, including the Geological Survey of Canada (Ottawa, Canada), IRIS/PASSCAL (Socorro, NM), Lamont-Doherty Earth Observatory (Palisades, NY), Stanford University (Stanford, CA), SCEC (Los Angeles, CA), USGS (Menlo Park, CA, and Woods Hole, MA), University of Texas at El Paso (El Paso, TX), GeoForschungsZentrum (Potsdam, Germany), University of Karlsruhe (Karlsruhe, Germany), and University of Copenhagen (Copenhagen, Denmark). The reader is referred to Table 1 for instrumentation used in LARSE II.

Program and Abstracts of the International Symposium on Detection of Subsurface Flow Phenomena by Self-Potential/Geoelectrical and Thermical Methods Held in Karlsruhe, Federal Republic of Germany on March 14-18, 1988

DTIC Science & Technology

1988-03-18

The tests were carried out at Le Mayet-de-Montagne (Allier). This test site is used by I.N.A.G. (Institut National d’Astronomie et de Geophysique ...study. Dep. Geophysique , Bureau de Recherches Geologiques et Minieres, B.P. 6009, 45060 Orleans Cedex 2, France 41 - THE USE OF INFRARED THERMOGRAPHY

Measurement and reduction of low-level radon background in the KATRIN experiment

DOE Office of Scientific and Technical Information (OSTI.GOV)

Fränkle, F. M.

The KArlsruhe TRItium Neutrino (KATRIN) experiment is a next generation, model independent, large scale experiment to determine the mass of the electron anti-neutrino by investigating the kinematics of tritium beta decay with a sensitivity of 200 meV/c{sup 2}. The measurement setup consists of a high luminosity windowless gaseous molecular tritium source (WGTS), a differential and cryogenic pumped electron transport and tritium retention section, a tandem spectrometer section (pre-spectrometer and main spectrometer) for energy analysis, followed by a detector system for counting transmitted beta decay electrons. Measurements performed at the KATRIN pre-spectrometer test setup showed that the decay of radon (Rn)more » atoms in the volume of the KATRIN spectrometers is a major background source. Rn atoms from low-level radon emanation of materials inside the vacuum region of the KATRIN spectrometers are able to penetrate deep into the magnetic flux tube so that the alpha decay of Rn contributes to the background. Of particular importance are electrons emitted in processes accompanying the Rn alpha decay, such as shake-off, internal conversion of excited levels in the Rn daughter atoms and Auger electrons. Lowenergy electrons (< 100 eV) directly contribute to the background in the signal region. High-energy electrons can be stored magnetically inside the volume of the spectrometer and are able to create thousands of secondary electrons via subsequent ionization processes with residual gas molecules. In order to reduce the Rn induced background different active and passive counter measures were developed and tested. This proceeding will give an overview on Rn sources within the KATRIN spectrometer, describes how Rn decays inside the spectrometer produce background events at the detector and presents different counter measures to reduce the Rn induced background.« less

Forest Type and Above Ground Biomass Estimation Based on Sentinel-2A and WorldView-2 Data Evaluation of Predictor nd Data Suitability

NASA Astrophysics Data System (ADS)

Fritz, Andreas; Enßle, Fabian; Zhang, Xiaoli; Koch, Barbara

2016-08-01

The present study analyses the two earth observation sensors regarding their capability of modelling forest above ground biomass and forest density. Our research is carried out at two different demonstration sites. The first is located in south-western Germany (region Karlsruhe) and the second is located in southern China in Jiangle County (Province Fujian). A set of spectral and spatial predictors are computed from both, Sentinel-2A and WorldView-2 data. Window sizes in the range of 3*3 pixels to 21*21 pixels are computed in order to cover the full range of the canopy sizes of mature forest stands. Textural predictors of first and second order (grey-level-co-occurrence matrix) are calculated and are further used within a feature selection procedure. Additionally common spectral predictors from WorldView-2 and Sentinel-2A data such as all relevant spectral bands and NDVI are integrated in the analyses. To examine the most important predictors, a predictor selection algorithm is applied to the data, whereas the entire predictor set of more than 1000 predictors is used to find most important ones. Out of the original set only the most important predictors are then further analysed. Predictor selection is done with the Boruta package in R (Kursa and Rudnicki (2010)), whereas regression is computed with random forest. Prior the classification and regression a tuning of parameters is done by a repetitive model selection (100 runs), based on the .632 bootstrapping. Both are implemented in the caret R pack- age (Kuhn et al. (2016)). To account for the variability in the data set 100 independent runs are performed. Within each run 80 percent of the data is used for training and the 20 percent are used for an independent validation. With the subset of original predictors mapping of above ground biomass is performed.

Measurement and reduction of low-level radon background in the KATRIN experiment

NASA Astrophysics Data System (ADS)

Fränkle, F. M.

2013-08-01

The KArlsruhe TRItium Neutrino (KATRIN) experiment is a next generation, model independent, large scale experiment to determine the mass of the electron anti-neutrino by investigating the kinematics of tritium beta decay with a sensitivity of 200 meV/c2. The measurement setup consists of a high luminosity windowless gaseous molecular tritium source (WGTS), a differential and cryogenic pumped electron transport and tritium retention section, a tandem spectrometer section (pre-spectrometer and main spectrometer) for energy analysis, followed by a detector system for counting transmitted beta decay electrons. Measurements performed at the KATRIN pre-spectrometer test setup showed that the decay of radon (Rn) atoms in the volume of the KATRIN spectrometers is a major background source. Rn atoms from low-level radon emanation of materials inside the vacuum region of the KATRIN spectrometers are able to penetrate deep into the magnetic flux tube so that the alpha decay of Rn contributes to the background. Of particular importance are electrons emitted in processes accompanying the Rn alpha decay, such as shake-off, internal conversion of excited levels in the Rn daughter atoms and Auger electrons. Lowenergy electrons (< 100 eV) directly contribute to the background in the signal region. High-energy electrons can be stored magnetically inside the volume of the spectrometer and are able to create thousands of secondary electrons via subsequent ionization processes with residual gas molecules. In order to reduce the Rn induced background different active and passive counter measures were developed and tested. This proceeding will give an overview on Rn sources within the KATRIN spectrometer, describes how Rn decays inside the spectrometer produce background events at the detector and presents different counter measures to reduce the Rn induced background.

Cambio : a file format translation and analysis application for the nuclear response emergency community.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lasche, George P.

2009-10-01

Cambio is an application intended to automatically read and display any spectrum file of any format in the world that the nuclear emergency response community might encounter. Cambio also provides an analysis capability suitable for HPGe spectra when detector response and scattering environment are not well known. Why is Cambio needed: (1) Cambio solves the following problem - With over 50 types of formats from instruments used in the field and new format variations appearing frequently, it is impractical for every responder to have current versions of the manufacturer's software from every instrument used in the field; (2) Cambio convertsmore » field spectra to any one of several common formats that are used for analysis, saving valuable time in an emergency situation; (3) Cambio provides basic tools for comparing spectra, calibrating spectra, and isotope identification with analysis suited especially for HPGe spectra; and (4) Cambio has a batch processing capability to automatically translate a large number of archival spectral files of any format to one of several common formats, such as the IAEA SPE or the DHS N42. Currently over 540 analysts and members of the nuclear emergency response community worldwide are on the distribution list for updates to Cambio. Cambio users come from all levels of government, university, and commercial partners around the world that support efforts to counter terrorist nuclear activities. Cambio is Unclassified Unlimited Release (UUR) and distributed by internet downloads with email notifications whenever a new build of Cambio provides for new formats, bug fixes, or new or improved capabilities. Cambio is also provided as a DLL to the Karlsruhe Institute for Transuranium Elements so that Cambio's automatic file-reading capability can be included at the Nucleonica web site.« less

Cloud chamber experiments on the origin of ice crystal complexity in cirrus clouds

NASA Astrophysics Data System (ADS)

Schnaiter, Martin; Järvinen, Emma; Vochezer, Paul; Abdelmonem, Ahmed; Wagner, Robert; Jourdan, Olivier; Mioche, Guillaume; Shcherbakov, Valery N.; Schmitt, Carl G.; Tricoli, Ugo; Ulanowski, Zbigniew; Heymsfield, Andrew J.

2016-04-01

This study reports on the origin of small-scale ice crystal complexity and its influence on the angular light scattering properties of cirrus clouds. Cloud simulation experiments were conducted at the AIDA (Aerosol Interactions and Dynamics in the Atmosphere) cloud chamber of the Karlsruhe Institute of Technology (KIT). A new experimental procedure was applied to grow and sublimate ice particles at defined super- and subsaturated ice conditions and for temperatures in the -40 to -60 °C range. The experiments were performed for ice clouds generated via homogeneous and heterogeneous initial nucleation. Small-scale ice crystal complexity was deduced from measurements of spatially resolved single particle light scattering patterns by the latest version of the Small Ice Detector (SID-3). It was found that a high crystal complexity dominates the microphysics of the simulated clouds and the degree of this complexity is dependent on the available water vapor during the crystal growth. Indications were found that the small-scale crystal complexity is influenced by unfrozen H2SO4 / H2O residuals in the case of homogeneous initial ice nucleation. Angular light scattering functions of the simulated ice clouds were measured by the two currently available airborne polar nephelometers: the polar nephelometer (PN) probe of Laboratoire de Métérologie et Physique (LaMP) and the Particle Habit Imaging and Polar Scattering (PHIPS-HALO) probe of KIT. The measured scattering functions are featureless and flat in the side and backward scattering directions. It was found that these functions have a rather low sensitivity to the small-scale crystal complexity for ice clouds that were grown under typical atmospheric conditions. These results have implications for the microphysical properties of cirrus clouds and for the radiative transfer through these clouds.

Survival and ice nucleation activity of bacteria as aerosols in a cloud simulation chamber

NASA Astrophysics Data System (ADS)

Amato, P.; Joly, M.; Schaupp, C.; Attard, E.; Möhler, O.; Morris, C. E.; Brunet, Y..; Delort, A.-M.

2015-02-01

The residence time of bacterial cells in the atmosphere is predictable by numerical models. However, estimations of their aerial dispersion as living entities are limited by lacks of information concerning survival rates and behavior in relation to atmospheric water. Here we investigate the viability and ice nucleation (IN) activity of typical atmospheric ice nucleation active bacteria (Pseudomonas syringae and P. fluorescens) when airborne in a cloud simulation chamber (AIDA, Karlsruhe, Germany). Cell suspensions were sprayed into the chamber and aerosol samples were collected by impingement at designated times over a total duration of up to 18 h, and at some occasions after dissipation of a cloud formed by depressurization. Aerosol concentration was monitored simultaneously by online instruments. The cultivability of airborne cells decreased exponentially over time with a half-life time of 250 ± 30 min (about 3.5 to 4.5 h). In contrast, IN activity remained unchanged for several hours after aerosolization, demonstrating that IN activity was maintained after cell death. Interestingly, the relative abundance of IN active cells still airborne in the chamber was strongly decreased after cloud formation and dissipation. This illustrates the preferential precipitation of IN active cells by wet processes. Our results indicate that from 106 = cells aerosolized from a surface, one would survive the average duration of its atmospheric journey estimated at 3.4 days. Statistically, this corresponds to the emission of 1 cell that achieves dissemination every ~33 min per m2 of cultivated crops fields, a strong source of airborne bacteria. Based on the observed survival rates, depending on wind speed, the trajectory endpoint could be situated several hundreds to thousands of kilometers from the emission source. These results should improve the representation of the aerial dissemination of bacteria in numeric models.

Results from the FIN-2 formal comparison

NASA Astrophysics Data System (ADS)

Connolly, Paul; Hoose, Corinna; Liu, Xiaohong; Moehler, Ottmar; Cziczo, Daniel; DeMott, Paul

2017-04-01

During the Fifth International Ice Nucleation Workshop (FIN-2) at the AIDA Ice Nucleation facility in Karlsruhe, Germany in March 2015, a formal comparison of ice nucleation measurement methods was conducted. During the experiments the samples of ice nucleating particles were not revealed to the instrument scientists, hence this was referred to as a "blind comparison". The two samples used were later revealed to be Arizona Test Dust and an Argentina soil sample. For these two samples seven mobile ice nucleating particle counters sampled directly from the AIDA chamber or from the aerosol preparation chamber at specified temperatures, whereas filter samples were taken for two offline deposition nucleation instruments. Wet suspension methods for determining IN concentrations were also used with 10 different methods employed. For the wet suspension methods experiments were conducted using INPs collected from the air inside the chambers (impinger sampling) and INPs taken from the bulk samples (vial sampling). Direct comparisons of the ice nucleating particle concentrations are reported as well as derived ice nucleation active site densities. The study highlights the difficulties in performing such analyses, but generally indicates that there is reasonable agreement between the wet suspension techniques. It is noted that ice nucleation efficiency derived from the AIDA chamber (quantified using the ice active surface site density approach) is higher than that for the cold stage techniques. This is both true for the Argentina soil sample and, to a lesser extent, for the Arizona Test Dust sample too. Other interesting effects were noted: for the ATD the impinger sampling demonstrated higher INP efficiency at higher temperatures (>255 K) than the vial sampling, but agreed at the lower temperatures (<255K), whereas the opposite was true for the Argentina soil sample. The results are analysed to better understand the performance of the various techniques and to address any

Survival and ice nucleation activity of bacteria as aerosols in a cloud simulation chamber

NASA Astrophysics Data System (ADS)

Amato, P.; Joly, M.; Schaupp, C.; Attard, E.; Möhler, O.; Morris, C. E.; Brunet, Y.; Delort, A.-M.

2015-06-01

The residence time of bacterial cells in the atmosphere is predictable by numerical models. However, estimations of their aerial dispersion as living entities are limited by a lack of information concerning survival rates and behavior in relation to atmospheric water. Here we investigate the viability and ice nucleation (IN) activity of typical atmospheric ice nucleation active bacteria (Pseudomonas syringae and P. fluorescens) when airborne in a cloud simulation chamber (AIDA, Karlsruhe, Germany). Cell suspensions were sprayed into the chamber and aerosol samples were collected by impingement at designated times over a total duration of up to 18 h, and at some occasions after dissipation of a cloud formed by depressurization. Aerosol concentration was monitored simultaneously by online instruments. The cultivability of airborne cells decreased exponentially over time with a half-life time of 250 ± 30 min (about 3.5 to 4.5 h). In contrast, IN activity remained unchanged for several hours after aerosolization, demonstrating that IN activity was maintained after cell death. Interestingly, the relative abundance of IN active cells still airborne in the chamber was strongly decreased after cloud formation and dissipation. This illustrates the preferential precipitation of IN active cells by wet processes. Our results indicate that from 106 cells aerosolized from a surface, one would survive the average duration of its atmospheric journey estimated at 3.4 days. Statistically, this corresponds to the emission of 1 cell that achieves dissemination every ~ 33 min m-2 of cultivated crops fields, a strong source of airborne bacteria. Based on the observed survival rates, depending on wind speed, the trajectory endpoint could be situated several hundreds to thousands of kilometers from the emission source. These results should improve the representation of the aerial dissemination of bacteria in numeric models.

[Physician assistants in surgery : A young profession through graduates' eyes].

PubMed

Hoffmann, Marcus; Arnegger, Silke; Mend, Bettina; Hoffmann, Reinhard; Marschall, Tanja

2018-06-01

In Germany, physician assistant (PA) is a comparatively young profession. The concept paper by the German Medical Association (BÄK) and the Federation of Statutory Health Insurance Physicians (KBV) from 2017 defines the new occupational profile in detail. In contrast, there is hardly any information on the day to day working life of a PA in Germany OBJECTIVE: The aim of this study was to map the employment reality of the PA graduates of the study program of the Baden-Wuerttemberg Cooperative State University Karlsruhe. Graduates of the PA study program were interviewed using the web-based evaluation system EvaSys V7.1 (Electric Paper Evaluationssysteme GmbH, Lüneburg, Deutschland) in the spring of 2018. The information was evaluated descriptively. The response rate was 70% (48 out of 69 graduates), 44 graduates were employed as a PA and 27 worked in a surgical department. The core tasks of the surgically active PA, which were often performed to varying frequency included assisting surgery and the performance of simple wound closures. In addition, activities in the areas of documentation, communication and information sharing were emphasized. The average salary of a surgical PA was 3718 €. This amount was rated by 44.4% as appropriate or very appropriate. The current occupational situation for 81.5% of the study participants was much better or better than expected before the start of their PA studies. Overall satisfaction was very high: 85.1% of the graduates were satisfied to very satisfied. The graduates' level of job satisfaction is remarkable. Many of the activities mentioned in the concept paper of the BÄK and KBV were carried out frequently or very frequently by the PA. Nonetheless, the PA profession has significant development potential, especially in the realm of surgical PAs.

Maiden flight of the infrared sounder GLORIA

NASA Astrophysics Data System (ADS)

Friedl-Vallon, Felix; Gloria-Team

2013-05-01

The Gimballed Limb Radiance Imager of the Atmosphere (GLORIA) instrument is an imaging Fourier transform spectrometer that is capable to operate on various high altitude research aircraft and on stratospheric balloons. The instrument is a joint development of the Helmholtz Centers Jülich and Karlsruhe Institute of Technology. GLORIA has flown for the first time in December 2011 on board the Russian Geophysica M55 research aircraft. Atmospheric measurements with GLORIA are possible in limb and nadir geometry. The scientific focus in limb sounding mode is on dynamics, tropopause region, TTL and polar UTLS. The nadir mode is tailored to processes in the troposphere such as biomass burning events and high precision methane measurements. The combination of limb and nadir will combine good spatial resolution in both the troposphere and lower stratosphere. In addition, GLORIA serves as a proof of concept instrument for the candidate ESA Earth explorer mission PREMIER. The GLORIA spectrometer consists of a classical Michelson interferometer combined with an infrared camera. The spectral range of the first instrument version extends from 780 cm-1 to 1400 cm-1 with a spectral resolution of up to 0.075 cm-1. The high speed HgCdTe focal plane array with 256×256 elements allows in the limb mode an extremely high spatial sampling of up to 100 m in the vertical domain. The spectrometer is mounted in a gimballed frame that permits agility in elevational and azimuthal direction, as well as image rotation. Scene acquisition and scene stabilisation are accomplished by a control system based on an inertial measurement unit. Limb scenes can be chosen within 45° and 132° to the flight direction of the aircraft allowing tomographic analysis of sampled air volumes.

Cross-validation of IASI/MetOp derived tropospheric δD with TES and ground-based FTIR observations

NASA Astrophysics Data System (ADS)

Lacour, J.-L.; Clarisse, L.; Worden, J.; Schneider, M.; Barthlott, S.; Hase, F.; Risi, C.; Clerbaux, C.; Hurtmans, D.; Coheur, P.-F.

2014-11-01

The Infrared Atmospheric Sounding Interferometer (IASI) flying on-board MetOpA and MetOpB is able to capture fine isotopic variations of the HDO to H2O ratio (δD) in the troposphere. Such observations at the high spatio temporal resolution of the sounder are of great interest to improve our understanding of the mechanisms controlling humidity in the troposphere. In this study we aim to empirically assess the validity of our error estimation previously evaluated theoretically. To achieve this, we compare IASI δD retrieved profiles with other available profiles of δD, from the TES infrared sounder onboard AURA and from three ground-based FTIR stations produced within the MUSICA project: the NDACC (Network for the Detection of Atmospheric Composition Change) sites Kiruna and Izana, and the TCCON site Karlsruhe, which in addition to near-infrared TCCON spectra also records mid-infrared spectra. We describe the achievable level of agreement between the different retrievals and show that these theoretical errors are in good agreement with empirical differences. The comparisons are made at different locations from tropical to Arctic latitudes, above sea and above land. Generally IASI and TES are similarly sensitive to δD in the free troposphere which allows to compare their measurements directly. At tropical latitudes where IASI's sensitivity is lower than that of TES, we show that the agreement improves when taking into account the sensitivity of IASI in the TES retrieval. For the comparison IASI-FTIR only direct comparisons are performed because of similar sensitivities. We identify a quasi negligible bias in the free troposphere (-3‰) between IASI retrieved δD with the TES one, which are bias corrected, but an important with the ground-based FTIR reaching -47‰. We also suggest that model-satellite observations comparisons could be optimized with IASI thanks to its high spatial and temporal sampling.

Comparing LOPES measurements of air-shower radio emission with REAS 3.11 and CoREAS simulations

NASA Astrophysics Data System (ADS)

Apel, W. D.; Arteaga-Velázquez, J. C.; Bähren, L.; Bekk, K.; Bertaina, M.; Biermann, P. L.; Blümer, J.; Bozdog, H.; Brancus, I. M.; Cantoni, E.; Chiavassa, A.; Daumiller, K.; de Souza, V.; di Pierro, F.; Doll, P.; Engel, R.; Falcke, H.; Fuchs, B.; Fuhrmann, D.; Gemmeke, H.; Grupen, C.; Haungs, A.; Heck, D.; Hörandel, J. R.; Horneffer, A.; Huber, D.; Huege, T.; Isar, P. G.; Kampert, K.-H.; Kang, D.; Krömer, O.; Kuijpers, J.; Link, K.; Łuczak, P.; Ludwig, M.; Mathes, H. J.; Melissas, M.; Morello, C.; Oehlschläger, J.; Palmieri, N.; Pierog, T.; Rautenberg, J.; Rebel, H.; Roth, M.; Rühle, C.; Saftoiu, A.; Schieler, H.; Schmidt, A.; Schröder, F. G.; Sima, O.; Toma, G.; Trinchero, G. C.; Weindl, A.; Wochele, J.; Zabierowski, J.; Zensus, J. A.

2013-12-01

Cosmic ray air showers emit radio pulses at MHz frequencies, which can be measured with radio antenna arrays - like LOPES at the Karlsruhe Institute of Technology in Germany. To improve the understanding of the radio emission, we test theoretical descriptions with measured data. The observables used for these tests are the absolute amplitude of the radio signal, and the shape of the radio lateral distribution. We compare lateral distributions of more than 500 LOPES events with two recent and public Monte Carlo simulation codes, REAS 3.11 and CoREAS (v 1.0). The absolute radio amplitudes predicted by REAS 3.11 are in good agreement with the LOPES measurements. The amplitudes predicted by CoREAS are lower by a factor of two, and marginally compatible with the LOPES measurements within the systematic scale uncertainties. In contrast to any previous versions of REAS, REAS 3.11 and CoREAS now reproduce the shape of the measured lateral distributions correctly. This reflects a remarkable progress compared to the situation a few years ago, and it seems that the main processes for the radio emission of air showers are now understood: The emission is mainly due to the geomagnetic deflection of the electrons and positrons in the shower. Less important but not negligible is the Askaryan effect (net charge variation). Moreover, we confirm that the refractive index of the air plays an important role, since it changes the coherence conditions for the emission: Only the new simulations including the refractive index can reproduce rising lateral distributions which we observe in a few LOPES events. Finally, we show that the lateral distribution is sensitive to the energy and the mass of the primary cosmic ray particles.

Distributed sounding of the boundary layer using multiple unmanned aerial systems during the ScaleX campaign 2016

NASA Astrophysics Data System (ADS)

Philipp, Andreas; Petersen, Erik; Groos, Alexander; Ferenci, Pia; Engerer, Stefan; Fiedler, Benedikt; Emeis, Stefan; Schäfer, Klaus; Brosy, Caroline; Zeeman, Matthias; Jacobeit, Jucundus

2017-04-01

In order to observe and better understand micro scale processes of interaction between the surface and the atmosphere and to relate them to meso and macro scale processes, an intensive measurement campaign at the TERENO (Terrestrial Environmental Observatories) site Fendt in southern Germany was organized in summer 2016 by IMK-IFU (Institute of Meteorology and Climate Research - Atmospheric Environmental Research) / KIT (Karlsruher Institute for Technology) under participation of a large number of cooperation partners. While several ground based remote sensing systems were implemented beside already installed long-term observing instruments for turbulence, soil moisture, trace gas emission etc., several flight campaigns with unmanned aerial systems took place. IGUA (Institute for Geography at the Universiy of Augsburg) contributed with spiral profile flights up to 1000 meters above ground level simultaneously at five locations, covering an 1 km x 1 km large area, corresponding to a WRF (Weather and Research Forecast model) grid box. Starting in the afternoon of 6th of July and ending in the morning of 7th of July each full hour an ascent was launched. While there were several technical problems leading to missing values, an all together useful dataset was produced covering the distribution of temperature, humidity and wind for the diurnal cycle. The contribution presents the interpretation of the profiles in respect to stratification of the planetary boundary layer and comparison to the cooperated instruments. An interesting aspect of the observation data is the modification of the wind field by an nearby terrain step which also influences cold air flow near the ground. These observations are compared to mesoscale model data (METRAS and later WRF) in order to check whether the principle mechanisms can be simulated.

First results from different investigations on MHD flow in multichannel U-Bends

DOE Office of Scientific and Technical Information (OSTI.GOV)

Reimann, J.; Barleon, L.; Molokov, S.

1995-04-01

In electrically coupled multichannel ducts with a U-bend geometry, MHD effects can result in strongly non-uniform distributions of flow rates Q{sub i} and pressure drops {Delta}p{sub i} in the individual channels. A multichannel U-bend geometry is part of the KfK self-cooled Pb-17Li blanket design for a fusion reactor (radial-toroidal-radial channels). However, inserts are proposed which decouple electrically the radial channels. The multi-channel effects (MCDs) were investigated by (i) Screening test with InGaSn at LAS, Riga, and (ii) more detailed experiments with NaK at KfK, Karlsruhe. Different flow channel geometries and channel numbers between 1 and 5 were used. Hartmann numbersmore » and interaction parameters were varied between O {le} M {le} 2300 and O {le} N {le} 40000. In parallel, a theoretical analysis was performed, based on the method of core flow approximation (CFA) which is valid for M {r_arrow} {infinity} and N {r_arrow} {infinity}. Significant MCEs occur in all ducts with totally electrically coupled channels. For the mode {Delta}p{sub i} = const, the flow rates in the outer channels can become significantly larger than those in the inner channels. For Q{sub i} = const, the highest pressure drop occurs in the middle channel and the lowest in the outer channels. The CFA predicts correctly the ratios of the pressure drops of the single channels but gives lower values than observed experimentally. No marked MCE was found for flow geometry which is similar to the KfK design, i.e., a fairly uniform flow rate and pressure drop distribution was observed for all values of M and N.« less

Anatomic changes of target vessels after fenestrated and branched aortic aneurysm repair.

PubMed

Kalder, J; Keschenau, P; Tamm, M; Jalaie, H; Jacobs, M J; Greiner, A

2014-04-01

Objective of this study was to evaluate the anatomic changes of the stented target vessels after endovascular repair of complex aortic aneurysms. Between July 2011 and December 2013, 53 aortic aneurysms were treated in our department with fenestrated and branched stent-graft devices. Forty-two of these patients were pre- and postoperatively scanned with a high resolution computer tomography (CT) (Cook Zenith® fenestrated or branched, Australia Pty. Ltd., Brisbane, Australia: N.=19; AnacondaTM fenestrated, Vascutek, Glasgow, Scotland, UK: N.=23). The other 11 out of the 53 patients did not receive a CT scan, because of a pre-existing renal failure. In the CT scans we retrospectively evaluated the anatomic vessel deviation at the origin of the target vessel and the vessel shift distal to the stent. For the first measurement the CT scans were loaded into OsiriX MD®, and the pre- and postoperative angles of the target vessels were measured and subtracted. For matching, the CT-scans were normalized at vertebral body lumbar 2. The second measured angle was the maximal measured angle distal to the target vessel stent-graft. Altogether, 113 target vessels were stented (celiac trunk [CT] 15, superior mesenteric arteries [SMA] 26, renal arteries [RA] 72), with 97 balloon-expandable PTFE stents: 90 Atrium V12 (Maquet Getinge group, Hudson, NH, USA), 7 BeGrafts (Bentley InnoMed, Hechingen, Germany) and 16 self-expandable fluency PTFE stents (Bard, Karlsruhe, Germany). The mean anatomic deviation at the target vessel origin was 28±17.3 and the mean vessel shift distal to the stent was 36.3±18.8. There were no significant differences between the main device and the target vessel stent types. Fenestrated and branched stent-graft solutions for aortic aneurysm repair induce changes of the target vessel anatomy. We did not observe significant differences between the several devices.

Transfer of adapted water supply technologies through a demonstration and teaching facility

NASA Astrophysics Data System (ADS)

Nestmann, F.; Oberle, P.; Ikhwan, M.; Stoffel, D.; Blaß, H. J.; Töws, D.; Schmidt, S.

2016-09-01

Water scarcity can be defined as a lack of sufficient water resources or as the limited or even missing access to a safe water supply. Latter can be classified as `economic water scarcity' which among others can commonly be met in tropical and subtropical karst regions of emerging and developing countries. Karst aquifers, mostly consisting of limestone and carbonate rock, show high infiltration rates which leads to a lack of above ground storage possibilities. Thus, the water will drain rapidly into the underground and evolve vast river networks. Considering the lack of appropriate infrastructure and limited human capacities in the affected areas, these underground water resources cannot be exploited adequately. Against this, background innovative and adapted technologies are required to utilize hard-to-access water resources in a sustainable way. In this context, the German-Indonesian joint R&D project "Integrated Water Resources Management (IWRM) Indonesia" dealt with the development of highly adaptable water technologies and management strategies. Under the aegis of the Karlsruhe Institute of Technology (KIT) and funded by the German Ministry of Education and Research (BMBF), these innovative technical concepts were exemplarily implemented to remedy this deficiency in the model region Gunung Sewu, a karst area situated on the southern coast of Java Island, Indonesia. The experiences gained through the interdisciplinary joint R&D activities clearly showed that even in the case of availability of appropriate technologies, a comprising transfer of knowhow and the buildup of capabilities (Capacity Development) is inevitable to sustainably implement and disseminate new methods. In this context, an adapted water supply facility was developed by KIT which hereafter shall serve for demonstration, teaching, and research purposes. The plant's functionality, its teaching and research concept, as well as the design process, which was accomplished in collaboration with the

Wind Tunnel Study of Turbulent Flow Structure in the Convective Boundary Layer Capped by a Temperature Inversion.

NASA Astrophysics Data System (ADS)

Fedorovich, Evgeni; Kaiser, Rolf; Rau, Matthias; Plate, Erich

1996-05-01

Experiments on simulating the atmospheric convective boundary layer (CBL), capped by a temperature inversion and affected by surface shear, were carried out in the thermally stratified wind tunnel of the Institute of Hydrology and Water Resources, University of Karlsruhe. The tunnel is of the closed-circuit type, with a test section 10 m long, 1.5 m wide, and 1.5 m high. The return section of the tunnel is subdivided into 10 layers, each driven by its own fan and heating system. By this means, velocity and temperature profiles can be preshaped at the inlet of the test section, which allows for the reproduction of developed CBL over comparatively short fetches. The bottom heating is controlled to produce the constant heat flux through the floor of the test section. The flow velocity components in the tunnel are measured with a laser Doppler system; for temperature measurements, the resistance-wire technique is employed.A quasi-stationary, horizontally evolving CBL was reproduced in the tunnel, with convective Richardson numbers RiT and RiN up to 10 and 20, respectively, and the shear/buoyancy dynamic ratio u(/w( in the range of 0.2-0.5. Within the employed modeling approach, means and other statistics of the flow were calculated by temporal averaging. Deardorff mixed-layer scaling was used as a framework for processing and interpreting the experimental results. The comparison of the wind tunnel data with results of atmospheric, water tank, and numerical studies of the CBL shows the crucial dependence of the turbulence statistics in the upper part of the layer on the parameters of entrainment, as well as the modification of the CBL turbulence regime by the surface shear.

Temperature-and field dependent characterization of a twisted stacked-tape cable

NASA Astrophysics Data System (ADS)

Barth, C.; Takayasu, M.; Bagrets, N.; Bayer, C. M.; Weiss, K.-P.; Lange, C.

2015-04-01

The twisted stacked-tape cable (TSTC) is one of the major high temperature superconductor cable concepts combining scalability, ease of fabrication and high current density making it a possible candidate as conductor for large scale magnets. To simulate the boundary conditions of such a magnets as well as the temperature dependence of TSTCs a 1.16 m long sample consisting of 40, 4 mm wide SuperPower REBCO tapes is characterized using the ‘FBI’ (force-field-current) superconductor test facility of the Institute for Technical Physics of the Karlsruhe Institute of Technology. In a first step, the magnetic background field is cycled while measuring the current carrying capabilities to determine the impact of Lorentz forces on the TSTC sample performance. In the first field cycle, the critical current of the TSTC sample is tested up to 12 T. A significant Lorentz force of up to 65.6 kN m-1 at the maximal magnetic background field of 12 T result in a 11.8% irreversible degradation of the current carrying capabilities. The degradation saturates (critical cable current of 5.46 kA at 4.2 K and 12 T background field) and does not increase in following field cycles. In a second step, the sample is characterized at different background fields (4-12 T) and surface temperatures (4.2-37.8 K) utilizing the variable temperature insert of the ‘FBI’ test facility. In a third step, the performance along the length of the sample is determined at 77 K, self-field. A 15% degradation is obtained for the central part of the sample which was within the high field region of the magnet during the in-field measurements.

Quantum Chemical Investigation of the Transition States and Intermediates for the Reaction of the Nitrosonium Ion with the Pentaammineazidocobalt(III) Ion.

PubMed

Rotzinger, François P

2016-12-19

The water exchange reaction on Co(NH 3 ) 5 OH 2 3+ was investigated with various density functionals and basis sets. A Gibbs activation energy (ΔG ⧧ ) agreeing with experiment was obtained with the long-range-corrected functionals ωB97X-D3 and LC-BOP-LRD, SMD hydration, and modified Karlsruhe def2-TZVP basis sets. This computational technique was then applied to the reaction of NO + with Co(NH 3 ) 5 N 3 2+ . All of the possible pathways were investigated, NO + attack at the terminal N of Co(NH 3 ) 5 N 3 2+ via the E and the Z isomers of the transition states, and NO + attack at the bound N of azide, also via both isomers. The most favorable pathway proceeds via the attack at the bound N via the Z isomer. This leads to the intermediate with an oxatetrazole ligand bound to Co(III) at the N in the 3-position, Co(NH 3 ) 5 (cycl-N 4 O) 3+ , which undergoes N 2 elimination to yield the Co(NH 3 ) 5 N 2 O 3+ intermediate. The subsequent substitution of N 2 O by water follows the I d mechanism with retention of the configuration. No evidence for the existence of the square-pyramidal pentacoordinated intermediate Co(NH 3 ) 5 3+ was found. All of the investigated intermediates, Co(NH 3 ) 5 N 2 3+ , Co(NH 3 ) 5 [E-N(N 2 )(NO)] 3+ , Co(NH 3 ) 5 (E-ON 4 ) 3+ , Co(NH 3 ) 5 ON 2 3+ , Co(NH 3 ) 5 (cycl-N 4 O) 3+ , and Co(NH 3 ) 5 N 2 O 3+ , exhibit short lifetimes of less than ∼60 μs and react via the I d mechanism.

Cryogenic experiences during W7-X HTS-current lead tests

DOE Office of Scientific and Technical Information (OSTI.GOV)

Richter, Thomas; Lietzow, Ralph

2014-01-29

The Karlsruhe Institute of Technology (KIT) was responsible for design, production and test of the High Temperature Superconductor (HTS) current leads (CL) for the stellerator Wendelstein 7-X (W7-X). 16 current leads were delivered. Detailed prototype tests as well as the final acceptance tests were performed at KIT, using a dedicated test cryostat assembled beside and connected to the main vacuum vessel of the TOSKA facility. A unique feature is the upside down orientation of the current leads due to the location of the power supplies in the basement of the experimental area of W7-X. The HTS-CL consists of three mainmore » parts: the cold end for the connection to the bus bar at 4.5 K, the HTS part operating in the temperature range from 4.5 K to 65 K and a copper heat exchanger (HEX) in the temperature range from 65 K to room temperature, which is cooled with 50 K helium. Therefore in TOSKA it is possible to cool test specimens simultaneously with helium at two different temperature levels. The current lead tests included different scenarios with currents up to 18.2 kA. In total, 10 cryogenic test campaigns with a total time of about 24 weeks were performed till beginning of 2013. The test facility as well as the 2 kW cryogenic plant of ITEP showed a very good reliability. However, during such a long and complex experimental campaign, one has to deal with failures, technical difficulties and incidents. The paper gives a summary of the test performance comprising the test preparation and operation. This includes the performance and reliability of the refrigerator and the test facility with reference to the process measuring and control system, the data acquisition system, as well as the building infrastructure.« less

Calibration and Application of an Array of Portable FTIR Spectrometers (EM27/SUN) for Detecting Greenhouse Gas Emissions

NASA Astrophysics Data System (ADS)

Frey, M.; Chelin, P.; Fratacci, T.; Schäfer, K.; Xueref-Remy, I.; Te, Y. V.; Jeseck, P.; Janssen, C.; Vogel, F. R.; Hase, F.; Blumenstock, T.; Kiel, M.; Sha, M. K.; Tu, Q.; Gross, J.; Gizaw, G.

2015-12-01

Anthropogenic global warming is mainly driven by a continuing increase of atmospheric greenhouse gases abundances. Precise knowledge of the variable atmospheric concentrations is of utmost importance for the quantification of sinks and sources of these gases. For global observations of column-averaged dry air mole fractions of greenhouse gases, satellite-borne instruments (e.g. GOSAT or OCO-2) are used. These instruments are validated against a network of ground-based high resolution Fourier-Transform Infrared (FTIR) spectrometers. This network, called TCCON (Total Carbon Column Observing Network), provides column-averaged abundances with reference precision and accuracy. However, these instruments are expensive, logistically demanding and stationary, so TCCON is less adequate for the quantification of sinks and sources on a regional scale. Recently the Karlsruhe Institute of Technology developed a portable FTIR spectrometer (EM27/SUN) together with Bruker Optics, Ettlingen. In addition to filling in the spatial gaps of the existing TCCON network for better global coverage, a set of these spectrometers can be arranged for detecting localized sinks and sources of greenhouse gases on a regional level, e.g. major cities or fracking areas. Due to their long lifetime, CO2 and CH4 emissions of these sources only introduce a small enhancement to the accumulated atmospheric background abundance. Therefore, high precision and stability are a prerequisite for the measurements. We present a rigorous calibration procedure for a quintuple of EM27/SUN spectrometers. Moreover, we show results from a test campaign conducted 2014 in the major city of Berlin, Germany. We demonstrate that the CO2 emissions of Berlin can be clearly identified in the observations. Measurement results are compared with a simple dispersion model. Finally, a comparison between Berlin data and data from a recent campaign in the megacity Paris is shown.

GASFLOW: A Computational Fluid Dynamics Code for Gases, Aerosols, and Combustion, Volume 3: Assessment Manual

DOE Office of Scientific and Technical Information (OSTI.GOV)

Müller, C.; Hughes, E. D.; Niederauer, G. F.

1998-10-01

Los Alamos National Laboratory (LANL) and Forschungszentrum Karlsruhe (FzK) are developing GASFLOW, a three-dimensional (3D) fluid dynamics field code as a best- estimate tool to characterize local phenomena within a flow field. Examples of 3D phenomena include circulation patterns; flow stratification; hydrogen distribution mixing and stratification; combustion and flame propagation; effects of noncondensable gas distribution on local condensation and evaporation; and aerosol entrainment, transport, and deposition. An analysis with GASFLOW will result in a prediction of the gas composition and discrete particle distribution in space and time throughout the facility and the resulting pressure and temperature loadings on the wallsmore » and internal structures with or without combustion. A major application of GASFLOW is for predicting the transport, mixing, and combustion of hydrogen and other gases in nuclear reactor containment and other facilities. It has been applied to situations involving transporting and distributing combustible gas mixtures. It has been used to study gas dynamic behavior in low-speed, buoyancy-driven flows, as well as sonic flows or diffusion dominated flows; and during chemically reacting flows, including deflagrations. The effects of controlling such mixtures by safety systems can be analyzed. The code version described in this manual is designated GASFLOW 2.1, which combines previous versions of the United States Nuclear Regulatory Commission code HMS (for Hydrogen Mixing Studies) and the Department of Energy and FzK versions of GASFLOW. The code was written in standard Fortran 90. This manual comprises three volumes. Volume I describes the governing physical equations and computational model. Volume II describes how to use the code to set up a model geometry, specify gas species and material properties, define initial and boundary conditions, and specify different outputs, especially graphical displays. Sample problems are included

Atmospheric limb sounding with imaging FTS

NASA Astrophysics Data System (ADS)

Friedl-Vallon, Felix; Riese, Martin; Preusse, Peter; Oelhaf, Hermann; Fischer, Herbert

Imaging Fourier transform spectrometers in the thermal infrared are a promising new class of sensors for atmospheric science. The availability of fast and sensitive large focal plane arrays with appropriate spectral coverage in the infrared region allows the conception and construction of innovative sensors for Nadir and Limb geometry. Instruments in Nadir geometry have already reached prototype status (e.g. Geostationary Imaging Fourier Transform Spectrometer / U. Wisconsin and NASA) or are in Phase A study (infrared sounding mission on Meteosat third generation / ESA and EUMETSAT). The first application of the new technical possibilities to atmospheric limb sounding from space, the Imaging Michelson Interferometer for Passive Atmospheric Sounding (IMIPAS), is currently studied by industry in the context of preparatory work for the next set of ESA earth explorers. The scientific focus of the instrument is on the processes controlling the composition of the mid/upper troposphere and lower stratosphere. The instrument concept of IMIPAS has been conceived at the research centres Karlsruhe and J¨lich. The development of a precursor instrument (GLORIA-AB) at these research institutions u started already in 2005. The instrument will be able to fly on board of various airborne platforms. First scientific missions are planned for the second half of the year 2009 on board the new German research aircraft HALO. This airborne sensor serves its own scientific purpose, but it also provides a test bed to learn about this new instrument class and its peculiarities and to learn to exploit and interpret the wealth of information provided by a limb imaging IR Fourier transform spectrometer. The presentation will discuss design considerations and challenges for GLORIA-AB and put them in the context of the planned satellite application. It will describe the solutions found, present first laboratory figures of merit for the prototype instrument and outline the new scientific

New German abortion law agreed.

PubMed

Karcher, H L

1995-07-15

The German Bundestag has passed a compromise abortion law that makes an abortion performed within the first three months of pregnancy an unlawful but unpunishable act if the woman has sought independent counseling first. Article 218 of the German penal code, which was established in 1871 under Otto von Bismarck, had allowed abortions for certain medical or ethical reasons. After the end of the first world war, the Social Democrats tried to legalize all abortions performed in the first three months of pregnancy, but failed. In 1974, abortion on demand during the first 12 weeks was declared legal and unpunishable under the social liberal coalition government of chancellor Willy Brandt; however, the same year, the German Federal Constitution Court in Karlsruhe ruled the bill was incompatible with article 2 of the constitution, which guarantees the right to life and freedom from bodily harm to everyone, including the unborn. The highest German court also ruled that a pregnant woman had to seek a second opinion from an independent doctor before undergoing an abortion. A new, extended article 218, which included a clause giving social indications, was passed by the Bundestag. When Germany was unified, East Germans agreed to be governed by all West German laws, except article 218. The Bundestag was given 2 years to revise the article; however, in 1993, the Federal Constitution Court rejected a version legalizing abortion in the first 3 months of the pregnancy if the woman sought counsel from an independent physician, and suggested the recent compromise passed by the Bundestag, the lower house of the German parliament. The upper house, the Bundesrat, where the Social Democrats are in the majority, still has to pass it. Under the bill passed by the Bundestag, national health insurance will pay for an abortion if the monthly income of the woman seeking the abortion falls under a certain limit.

Recent Efforts in Data Compilations for Nuclear Astrophysics

NASA Astrophysics Data System (ADS)

Dillmann, Iris

2008-05-01

Some recent efforts in compiling data for astrophysical purposes are introduced, which were discussed during a JINA-CARINA Collaboration meeting on ``Nuclear Physics Data Compilation for Nucleosynthesis Modeling'' held at the ECT* in Trento/Italy from May 29th-June 3rd, 2007. The main goal of this collaboration is to develop an updated and unified nuclear reaction database for modeling a wide variety of stellar nucleosynthesis scenarios. Presently a large number of different reaction libraries (REACLIB) are used by the astrophysics community. The ``JINA Reaclib Database'' on http://www.nscl.msu.edu/~nero/db/ aims to merge and fit the latest experimental stellar cross sections and reaction rate data of various compilations, e.g. NACRE and its extension for Big Bang nucleosynthesis, Caughlan and Fowler, Iliadis et al., and KADoNiS. The KADoNiS (Karlsruhe Astrophysical Database of Nucleosynthesis in Stars, http://nuclear-astrophysics.fzk.de/kadonis) project is an online database for neutron capture cross sections relevant to the s process. The present version v0.2 is already included in a REACLIB file from Basel university (http://download.nucastro.org/astro/reaclib). The present status of experimental stellar (n,γ) cross sections in KADoNiS is shown. It contains recommended cross sections for 355 isotopes between 1H and 210Bi, over 80% of them deduced from experimental data. A ``high priority list'' for measurements and evaluations for light charged-particle reactions set up by the JINA-CARINA collaboration is presented. The central web access point to submit and evaluate new data is provided by the Oak Ridge group via the http://www.nucastrodata.org homepage. ``Workflow tools'' aim to make the evaluation process transparent and allow users to follow the progress.

Special Issue "Natural Hazards' Impact on Urban Areas and Infrastructure" in Natural Hazards

NASA Astrophysics Data System (ADS)

Bostenaru Dan, M.

2009-04-01

In 2006 and 2007, at the 3rd and 4th General Assembly of the European Geosciences Union respectivelly, the session on "Natural Hazards' Impact on Urban Areas and Infrastructure" was convened by Maria Bostenaru Dan, then at the Istituto Universitario di Studi Superiori di Pavia, ROSE School, Italy, who conducts research on earthquake management and Heidi Kreibich from the GFZ Potsdam, Germany, who conducts research on flood hazards, in 2007 being co-convened also by Agostino Goretti from the Civil Protection in Rome, Italy. The session initially started from an idea of Friedemann Wenzel from the Universität Karlsruhe (TH), Germany, the former speaker of the SFB 461 "Strong earthquakes", the university where also Maria Bostenaru graduated and worked and which runs together with the GFZ Potsdam the CEDIM, the Center for Disaster Management and Risk Reduction Technology. Selected papers from these two sessions as well as invited papers from other specialists were gathered for a special issue to be published in the journal "Natural Hazards" under the guest editorship of Heidi Kreibich and Maria Bostenaru Dan. Unlike the former special issue, this one contains a well balanced mixture of many hazards: climate change, floods, mountain hazards like avalanches, volcanoes, earthquakes. Aim of the issue was to enlarge the co-operation prospects between geosciences and other professions in field of natural hazards. Earthquake engineering and engineering seismology are seen more frequently co-operating, but in field of natural hazards there is a need to co-operate with urban planners, and, looking to the future, also in the field of integrated conservation, which implies co-operation between architecture and urban planning for the preservation of our environment. Integrated conservation is stipulated since the 1970s, which are the years when the participatism, and so the involvment of social sciences started.

Spatial structures in UTLS trace gases imaged by the GLORIA instrument during the TACTS/ESMVal campaign in 2012

NASA Astrophysics Data System (ADS)

Guggenmoser, Tobias; Ungermann, Joern; Blank, Joerg; Kleinert, Anne; Grooss, Jens-Uwe; Vogel, Baerbel

2013-04-01

The combined TACTS/ESMVal measurement campaign was conducted during August and September 2012. Its objective was to improve our understanding of the UTLS region using a combination of airborne in situ and remote sensing devices. While the focus of TACTS was on exchange processes across the tropopause, ESMVal's objective was to obtain a wide latitude coverage from northern to southern polar regions. The campaign was based in Oberpfaffenhofen (D), with support bases in Sal (CV), Malé (MV), and Cape Town (ZA). A total of 13 scientific flights, ranging in latitude from 65°S to 80°N, were performed aboard the High Altitude and LOng Range (HALO) research aircraft, operated by the German Aerospace Agency (DLR). One of the core instruments was GLORIA, the Gimballed Limb Observer for Radiance Imaging of the Atmosphere. GLORIA is a joint development of Forschungszentrum Jülich and Karlsruher Institut für Technologie. It is an imaging Fourier transform spectrometer in the thermal infrared range, designed to optimize either spatial or spectral resolution, so as to yield data for dynamical as well as chemical analysis. In dynamics mode, the instrument also pans between measurements, making it possible to observe the same target volume from multiple directions. Combined with the right flight pattern, a 3D tomographic analysis becomes possible. In this presentation, we will show our first results for temperature and trace gas mixing ratios from a selection of the TACTS/ESMVal flights, concentrating on dynamics mode measurements in the polar regions. We will show the resolution of filaments in the UTLS region in two-dimensional cross-sections along the flight path, as well as preliminary results from true 3D retrievals.

Big Computing in Astronomy: Perspectives and Challenges

NASA Astrophysics Data System (ADS)

Pankratius, Victor

2014-06-01

a distinguished doctorate and a Habilitation degree in Computer Science from the University of Karlsruhe. Contact him at pankrat@mit.edu, victorpankratius.com, or Twitter @vpankratius.

Validation and comparison of two methods to assess human energy expenditure during free-living activities.

PubMed

Anastasopoulou, Panagiota; Tubic, Mirnes; Schmidt, Steffen; Neumann, Rainer; Woll, Alexander; Härtel, Sascha

2014-01-01

The measurement of activity energy expenditure (AEE) via accelerometry is the most commonly used objective method for assessing human daily physical activity and has gained increasing importance in the medical, sports and psychological science research in recent years. The purpose of this study was to determine which of the following procedures is more accurate to determine the energy cost during the most common everyday life activities; a single regression or an activity based approach. For this we used a device that utilizes single regression models (GT3X, ActiGraph Manufacturing Technology Inc., FL., USA) and a device using activity-dependent calculation models (move II, movisens GmbH, Karlsruhe, Germany). Nineteen adults (11 male, 8 female; 30.4±9.0 years) wore the activity monitors attached to the waist and a portable indirect calorimeter (IC) as reference measure for AEE while performing several typical daily activities. The accuracy of the two devices for estimating AEE was assessed as the mean differences between their output and the reference and evaluated using Bland-Altman analysis. The GT3X overestimated the AEE of walking (GT3X minus reference, 1.26 kcal/min), walking fast (1.72 kcal/min), walking up-/downhill (1.45 kcal/min) and walking upstairs (1.92 kcal/min) and underestimated the AEE of jogging (-1.30 kcal/min) and walking upstairs (-2.46 kcal/min). The errors for move II were smaller than those for GT3X for all activities. The move II overestimated AEE of walking (move II minus reference, 0.21 kcal/min), walking up-/downhill (0.06 kcal/min) and stair walking (upstairs: 0.13 kcal/min; downstairs: 0.29 kcal/min) and underestimated AEE of walking fast (-0.11 kcal/min) and jogging (-0.93 kcal/min). Our data suggest that the activity monitor using activity-dependent calculation models is more appropriate for predicting AEE in daily life than the activity monitor using a single regression model.

Degradation of latex and of natural rubber by Streptomyces strain La 7.

PubMed

Gallert, C

2000-10-01

Streptomyces strain La 7 was isolated from the banquete of a city high way in Karlsruhe. According to partial 16S rRNA gene sequencing it was identical with Streptomyces albogriseolus and Streptomyces viridodiastaticus. DNA-DNA-similarity studies revealed 80.3-82.4% similarity between each of two of the three strains. Although phylogenetically closely related, Streptomyces strain La 7 differed from the two reference strains by morphological as well as physiological features and might represent a new species aside of S. albogriseolus and S. viridodiastaticus. The new Streptomyces strain La 7 was grown in a medium containing a latex emulsion or squares of natural rubber gloves as the only carbon source. On agar plates with a latex overlay agar, translucent halo formation around the colonies was observed. The unvulcanized latex was metabolized and the carbon from the isoprene units was apparently used for cell growth. In shake cultures with unlimited oxygen supply, during 60 days of incubation, 140 mg of the 175 mg totally emulgated latex were degraded exponentially. In sterile control flasks about 3% of the initial amount of latex could not be recovered after incubation on a shaker, presumably due to photochemical transformation. During static incubation of sterile medium, the latex formed a sticky layer at the surface of the medium and on the glass walls and recovery of the material was more difficult. Estimation of the protein content of cells from total nitrogen resulted in about 50% of the degraded latex being incorporated into cells, if a standard cell composition was assumed. Direct protein analysis according to Bradford (1976) gave much lower estimates, presumably due to a low content of aromatic amino acids. Stripes of natural rubber were degraded by Streptomyces strain La 7 during 70 days to an extent of about 30%. Scanning electron microscopy demonstrated, that hyphes of Streptomyces strain La 7 colonized and penetrated the latex surface with a concomitant

Seasonal, synoptic and diurnal variation of atmospheric water-isotopologues in the boundary layer of Southwestern Germany caused by plant transpiration, cold-front passages and dewfall.

NASA Astrophysics Data System (ADS)

Christner, Emanuel; Dyroff, Christoph; Kohler, Martin; Zahn, Andreas; Gonzales, Yenny; Schneider, Matthias

2013-04-01

Atmospheric water is an enormously crucial trace gas. It is responsible for ~70 % of the natural greenhouse effect (Schmidt et al., JGR, 2010) and carries huge amounts of latent heat. The isotopic composition of water vapor is an elegant tracer for a better understanding and quantification of the extremely complex and variable hydrological cycle in Earth's atmosphere (evaporation, cloud condensation, rainout, re-evaporation, snow), which in turn is a prerequisite to improve climate modeling and predictions. As H216O, H218O and HDO differ in vapor pressure and mass, isotope fractionation occurs due to condensation, evaporation and diffusion processes. In contrast to that, plants are able to transpire water with almost no isotope fractionation. For that reason the ratio of isotopologue concentrations in the boundary layer (BL) provides, compared to humidity measurements alone, independent and additional constraints for quantifying the strength of evaporation and transpiration. Furthermore the isotope ratios contain information about transport history of an air mass and microphysical processes, that is not accessible by humidity measurements. Within the project MUSICA (MUlti-platform remote Sensing of Isotopologues for investigating the Cycle of Atmospheric water) a commercial Picarro Analyzer L2120-i is operated at Karlsruhe in Southwestern Germany, which is continuously measuring the isotopologues H216O, HDO and H218O of atmospheric water vapor since January 2012. A one year record of H216O, HDO and H218O shows clear seasonal, synoptic and diurnal characteristics and reveals the main driving processes affecting the isotopic composition of water vapor in the Middle European BL. Changes in continental plant transpiration and evaporation throughout the year lead to a slow seasonal HDO/H216O-variation, that cannot be explained by pure Rayleigh condensation. Furthermore, cold-front passages from NW lead to fast and pronounced depletion of the HDO/H216O-ratio within

Cross-validation of IASI/MetOp derived tropospheric δD with TES and ground-based FTIR observations

NASA Astrophysics Data System (ADS)

Lacour, J.-L.; Clarisse, L.; Worden, J.; Schneider, M.; Barthlott, S.; Hase, F.; Risi, C.; Clerbaux, C.; Hurtmans, D.; Coheur, P.-F.

2015-03-01

The Infrared Atmospheric Sounding Interferometer (IASI) flying onboard MetOpA and MetOpB is able to capture fine isotopic variations of the HDO to H2O ratio (δD) in the troposphere. Such observations at the high spatio-temporal resolution of the sounder are of great interest to improve our understanding of the mechanisms controlling humidity in the troposphere. In this study we aim to empirically assess the validity of our error estimation previously evaluated theoretically. To achieve this, we compare IASI δD retrieved profiles with other available profiles of δD, from the TES infrared sounder onboard AURA and from three ground-based FTIR stations produced within the MUSICA project: the NDACC (Network for the Detection of Atmospheric Composition Change) sites Kiruna and Izaña, and the TCCON site Karlsruhe, which in addition to near-infrared TCCON spectra also records mid-infrared spectra. We describe the achievable level of agreement between the different retrievals and show that these theoretical errors are in good agreement with empirical differences. The comparisons are made at different locations from tropical to Arctic latitudes, above sea and above land. Generally IASI and TES are similarly sensitive to δD in the free troposphere which allows one to compare their measurements directly. At tropical latitudes where IASI's sensitivity is lower than that of TES, we show that the agreement improves when taking into account the sensitivity of IASI in the TES retrieval. For the comparison IASI-FTIR only direct comparisons are performed because the sensitivity profiles of the two observing systems do not allow to take into account their differences of sensitivity. We identify a quasi negligible bias in the free troposphere (-3‰) between IASI retrieved δD with the TES, which are bias corrected, but important with the ground-based FTIR reaching -47‰. We also suggest that model-satellite observation comparisons could be optimized with IASI thanks to its high

100G Ethernet in the wild - first experiences

NASA Astrophysics Data System (ADS)

Hoeft, Bruno; Stoy, Robert; Schröder, Frank; Reymund, Aurelie; Niederberger, Ralf; Mextorf, Olaf; Werner, Sabine

2011-12-01

A 100 Gigabit Testbed was established in a collaboration of 6 partners. Three industry partners have contributed the fiber infrastructure, the DWDM equipment, as well as the required routers. 447 kilometer was the distance of the wide area testbed established in collaboration with the German NREN DFN between Karlsruhe Institute of Technology and Forschungszentrum Jülich Before starting, DFN assured the quality of the fiber infrastructure, the operation of the DWDM systems at both locations, as well as the connection of the routers to this WAN link with a bandwidth of 100GE. 12*10GE interfaces were available at each site for connecting the local testnodes to the routers. A monitoring and measurement framework was installed for recording the most important IP network performance metrics, among them the One Way Delay (OWD) and its Variation, Packet Loss and Packet Reordering. The delay measurements were conducted between the GPS time synchronized Hades[1]measurement nodes at each location. Additionally all relevant counters at the routers have been recorded using a SNMP based Network Manangement Station and supplemented special command line interface output gathering and parsing scripts. The interfaces statistics were stored in 60 second intervals. The aim of the testbed was to demonstrate a failure-free transmission of one or more IP datastreams over 100GE during the whole period of 4 weeks.This included the evaluation of the 100 Gbit/s optical transmission system, the 100GE interfaces between the routers and the optical system, and the evaluation of a sustained 100GE transmission as well as the evaluation of the use of 100GE in a production like environment. The evaluation included a circulated (in a routing loop) tunable load between 1 and 100 Gbit/s, measurement of transmission quality of TCP and UDP datastreams between the endsystems, measurements of one way latency, a ramping up data transmission from approx. 8 Gbit/s up to 96 Gbit/s.

Temperature- and field-dependent characterization of a conductor on round core cable

NASA Astrophysics Data System (ADS)

Barth, C.; van der Laan, D. C.; Bagrets, N.; Bayer, C. M.; Weiss, K.-P.; Lange, C.

2015-06-01

The conductor on round core (CORC) cable is one of the major high temperature superconductor cable concepts combining scalability, flexibility, mechanical strength, ease of fabrication and high current density; making it a possible candidate as conductor for large, high field magnets. To simulate the boundary conditions of such magnets as well as the temperature dependence of CORC cables a 1.16 m long sample consisting of 15, 4 mm wide SuperPower REBCO tapes was characterized using the ‘FBI’ (force—field—current) superconductor test facility of the Institute for Technical Physics of the Karlsruhe Institute of Technology. In a five step investigation, the CORC cable’s performance was determined at different transverse mechanical loads, magnetic background fields and temperatures as well as its response to swift current changes. In the first step, the sample’s 77 K, self-field current was measured in a liquid nitrogen bath. In the second step, the temperature dependence was measured at self-field condition and compared with extrapolated single tape data. In the third step, the magnetic background field was repeatedly cycled while measuring the current carrying capabilities to determine the impact of transverse Lorentz forces on the CORC cable sample’s performance. In the fourth step, the sample’s current carrying capabilities were measured at different background fields (2-12 T) and surface temperatures (4.2-51.5 K). Through finite element method simulations, the surface temperatures are converted into average sample temperatures and the gained field- and temperature dependence is compared with extrapolated single tape data. In the fifth step, the response of the CORC cable sample to rapid current changes (8.3 kA s-1) was observed with a fast data acquisition system. During these tests, the sample performance remains constant, no degradation is observed. The sample’s measured current carrying capabilities correlate to those of single tapes assuming

The power of in situ pulsed laser deposition synchrotron characterization for the detection of domain formation during growth of Ba0.5Sr0.5TiO3 on MgO.

PubMed

Bauer, Sondes; Lazarev, Sergey; Molinari, Alan; Breitenstein, Andreas; Leufke, Philipp; Kruk, Robert; Hahn, Horst; Baumbach, Tilo

2014-03-01

A highly sophisticated pulsed laser deposition (PLD) chamber has recently been installed at the NANO beamline at the synchrotron facility ANKA (Karlsruhe, Germany), which allows for comprehensive studies on the PLD growth process of dielectric, ferroelectric and ferromagnetic thin films in epitaxial oxide heterostructures or even multilayer systems by combining in situ reflective high-energy diffraction with the in situ synchrotron high-resolution X-ray diffraction and surface diffraction methods. The modularity of the in situ PLD chamber offers the opportunity to explore the microstructure of the grown thin films as a function of the substrate temperature, gas pressure, laser fluence and target-substrate separation distance. Ba0.5Sr0.5TiO3 grown on MgO represents the first system that is grown in this in situ PLD chamber and studied by in situ X-ray reflectivity, in situ two-dimensional reciprocal space mapping of symmetric X-ray diffraction and acquisition of time-resolved diffraction profiles during the ablation process. In situ PLD synchrotron investigation has revealed the occurrence of structural distortion as well as domain formation and misfit dislocation which all depend strongly on the film thickness. The microstructure transformation has been accurately detected with a time resolution of 1 s. The acquisition of two-dimensional reciprocal space maps during the PLD growth has the advantage of simultaneously monitoring the changes of the crystalline structure as well as the formation of defects. The stability of the morphology during the PLD growth is demonstrated to be remarkably affected by the film thickness. A critical thickness for the domain formation in Ba0.5Sr0.5TiO3 grown on MgO could be determined from the acquisition of time-resolved diffraction profiles during the PLD growth. A splitting of the diffraction peak into two distinguishable peaks has revealed a morphology change due to modification of the internal strain during growth.

Volatile Organic Compounds (VOCs) onboard the HALO research aircraft during OMO-ASIA

NASA Astrophysics Data System (ADS)

Safadi, Layal; Neumaier, Marco; Fischbeck, Garlich; Zahn, Andreas

2016-04-01

We report on first results of VOC measurements during the OMO-Asia campaign that took place in summer 2015 on Cyprus and on the island of Gan (Maldives) to study the free-radical chemistry at higher altitudes during the Asian summer monsoon. The deployed instrument (KMS = Karlsruhe Mass Spectrometer) is based on a commercial PTRMS from Ionicon and was strongly modified for the use onboard the research aircraft HALO (a modified Gulfstream GV-550 having a ceiling altitude of ~15.5 km). By the construction of an aluminum vacuum system, the development of largely custom-made electronics and the use of light-weight pumps, the weight was reduced to ~55 kg compared to 120-130 kg of the commercial instrument. The KMS is in addition very robust and field-compliant. Before OMO-Asia the HALO payload was tested first during a technical field campaign OMO-EU which took place in Oberpfaffenhofen (Germany) in winter 2015. During OMO-Asia the instrument was calibrated before and after each flight by diluting an external gas standard (Apel-Riemer Environmental, Inc. Denver, Colorado) containing ~1 ppm of 10 VOCs. The determined sensitivity for acetone was ~380 cps/ppb showing a variation of ±5% over a period of 8 weeks. The detection limit amounted to ~35 ppt for acetone at an integration time of 6 s. The measurements during all together 17 flights took place over a wide range of Asia, including Saudi Arabia, Bahrain, Oman and Sri Lanka. Referring to the meteorological forecasts of carbon monoxide (CO), remnant of the Asia monsoon outflow was measured during some flights (e.g. over Oman). Acetone mixing ratios of up to ~1500 ppt and up to ~100 ppt of benzene were measured in the outflow of the plume. The gathered data shows a good correlation with the measurements taken with other instruments (e.g. CO measurements by Max Planck Institute for Chemistry). The poster will describe the instrument and the main features derived.

Synthesis, structural, electronic and linear electro-optical features of new quaternary Ag2Ga2SiS6 compound

NASA Astrophysics Data System (ADS)

Piasecki, M.; Myronchuk, G. L.; Parasyuk, O. V.; Khyzhun, O. Y.; Fedorchuk, A. O.; Pavlyuk, V. V.; Kozer, V. R.; Sachanyuk, V. P.; El-Naggar, A. M.; Albassam, A. A.; Jedryka, J.; Kityk, I. V.

2017-02-01

For the first time phase equilibria and phase diagram of the AgGaS2-SiS2 system were successfully explored by differential thermal and X-ray phase analysis methods. Crystal structure of low-temperature (LT) modification of Ag2Ga2SiS6 (LT- Ag2Ga2SiS6) was studied by X-ray powder method and it belongs to tetragonal space group I-42d, with unit cell parameters a=5.7164(4) Å, c=9.8023(7) Å, V=320.32(7) Å3. Additional details regarding the crystal structure exploration are available at the web page Fachinformationszentrum Karlsruhe. X-ray photoelectron core-level and valence-band spectra were measured for pristine LT- Ag2Ga2SiS6 crystal surface. In addition, the X-ray photoelectron valence-band spectrum of LT-Ag2Ga2SiS6 was matched on a common energy scale with the X-ray emission S Kβ1,3 and Ga Kβ2 bands, which give information on the energy distribution of the S 3p and Ga 4p states, respectively. The presented X-ray spectroscopy results indicate that the valence S p and Ga p atomic states contribute mainly to the upper and central parts of the valence band of LT-Ag2Ga2SiS6, respectively, with a less significant contribution also to other valence-band regions. Band gap energy was estimated by measuring the quantum energy in the spectral range of the fundamental absorption. We have found that energy gap Eg is equal to 2.35 eV at 300 K. LT-Ag2Ga2SiS6 is a photosensitive material and reveals two spectral maxima on the curve of spectral photoconductivity spectra at λmax1 =590 nm and λmax2 =860 nm. Additionally, linear electro-optical effect of LT-Ag2Ga2SiS6 for the wavelengths of a cw He-Ne laser at 1150 nm was explored.

Optimization and shelf life of a low-lactose yogurt with Lactobacillus rhamnosus HN001.

PubMed

Ibarra, A; Acha, R; Calleja, M-T; Chiralt-Boix, A; Wittig, E

2012-07-01

Lactose intolerance results in gastrointestinal discomfort and the malabsorption of certain nutrients, such as calcium. The replacement of milk with low-lactose and probiotic-enriched dairy products is an effective strategy of mitigating the symptoms of lactose intolerance. Lactobacillus rhamnosus HN001 (HN001) is a safe, immunity-stimulating probiotic. We have developed a process to increase the hydrolysis of lactose and HN001 growth in yogurt versus β-galactosidase (βG) concentration and enzymatic hydrolysis time (EHT) before bacterial fermentation. The objective of this study was to optimize the conditions by which yogurt is processed as a function of βG and EHT using a multifactorial design, with lactose content, HN001 growth, process time, and sensory quality as dependent variables. Further, the shelf life of the optimized yogurt was evaluated. In the optimization study, polynomials explained the dependent variables. Based on Pearson correlation coefficients, HN001 growth correlated positively with the hydrolysis of lactose. However, low lactose content and high HN001 count increased the fermentation time and lowered the sensory quality. The optimized conditions-using polynomials to obtain yogurt with >1 × 10(7) cfu of HN001/mL, <10 g of lactose/L, and a minimum overall sensory quality of 7 on the Karlsruhe scale-yielded a theoretical value of 910 neutral lactose units/kg for βG and 2.3h for EHT, which were validated in an industrial-scale assay. Based on a shelf-life study at 3 temperatures, the hydrolysis of lactose and the growth of HN001 continue during storage. Arrhenius equations were developed for the variables in the shelf-life study. Our results demonstrate that it is feasible to develop a low-lactose yogurt to which HN001 has been added for lactose-intolerant persons who wish to strengthen their immune system. Copyright © 2012 American Dairy Science Association. Published by Elsevier Inc. All rights reserved.

Investigation of heat flux processes governing the increase of groundwater temperatures beneath cities

NASA Astrophysics Data System (ADS)

Bayer, P.; Menberg, K.; Zhu, K.; Blum, P.

2012-12-01

city of Karlsruhe (Germany), for example, also indicates a spatial correlation between the urban heat island effect in the subsurface and in the atmosphere.

Overview of the IFMIF/EVEDA project

NASA Astrophysics Data System (ADS)

Knaster, J.; Garin, P.; Matsumoto, H.; Okumura, Y.; Sugimoto, M.; Arbeiter, F.; Cara, P.; Chel, S.; Facco, A.; Favuzza, P.; Furukawa, T.; Heidinger, R.; Ibarra, A.; Kanemura, T.; Kasugai, A.; Kondo, H.; Massaut, V.; Molla, J.; Micciche, G.; O'hira, S.; Sakamoto, K.; Yokomine, T.; Wakai, E.; the IFMIF/EVEDA Integrated Project Team

2017-10-01

IFMIF, the International Fusion Materials Irradiation Facility, is presently in its engineering validation and engineering design activities (EVEDA) phase under the Broader Approach Agreement. The engineering design activity (EDA) phase was successfully accomplished within the allocated time. The engineering validation activity (EVA) phase has focused on validating the Accelerator Facility (AF), the Target Facility and the Test Facility (TF) by constructing prototypes. The ELTL at JAEAc, Oarai successfully demonstrated the long-term stability of a Li flow under the IFMIF’s nominal operational conditions keeping the specified free-surface fluctuations below  ±1 mm in a continuous manner for 25 d. A full-scale prototype of the high flux test module (HFTM) was successfully tested in the HELOKA loop (KIT, Karlsruhe), where it was demonstrated that the irradiation temperature can be set individually and kept uniform. LIPAc, designed and constructed in European labs under the coordination of F4E, presently under installation and commissioning in the Rokkasho Fusion Institute, aims at validating the concept of IFMIF accelerators with a D+ beam of 125 mA continuous wave (CW) and 9 MeV. The commissioning phases of the H+/D+ beams at 100 keV are progressing and should be concluded in 2017; in turn, the commissioning of the 5 MeV beam is due to start during 2017. The D+ beam through the superconducting cavities is expected to be achieved within the Broader Approach Agreement time frame with the superconducting cryomodule being assembled in Rokkasho. The realisation of a fusion-relevant neutron source is a necessary step for the successful development of fusion. The ongoing success of the IFMIF/EVEDA involves ruling out concerns about potential technical showstoppers which were raised in the past. Thus, a situation has emerged where soon steps towards constructing a Li(d,xn) fusion-relevant neutron source could be taken, which is also justified in the light of costs

Simulation of background from low-level tritium and radon emanation in the KATRIN spectrometers

DOE Office of Scientific and Technical Information (OSTI.GOV)

Leiber, B.; Collaboration: KATRIN Collaboration

The KArlsruhe TRItium Neutrino (KATRIN) experiment is a large-scale experiment for the model independent determination of the mass of electron anti-neutrinos with a sensitivity of 200 meV/c{sup 2}. It investigates the kinematics of electrons from tritium beta decay close to the endpoint of the energy spectrum at 18.6 keV. To achieve a good signal to background ratio at the endpoint, a low background rate below 10{sup −2} counts per second is required. The KATRIN setup thus consists of a high luminosity windowless gaseous tritium source (WGTS), a magnetic electron transport system with differential and cryogenic pumping for tritium retention, andmore » electro-static retarding spectrometers (pre-spectrometer and main spectrometer) for energy analysis, followed by a segmented detector system for counting transmitted beta-electrons. A major source of background comes from magnetically trapped electrons in the main spectrometer (vacuum vessel: 1240 m{sup 3}, 10{sup −11} mbar) produced by nuclear decays in the magnetic flux tube of the spectrometer. Major contributions are expected from short-lived radon isotopes and tritium. Primary electrons, originating from these decays, can be trapped for hours, until having lost almost all their energy through inelastic scattering on residual gas particles. Depending on the initial energy of the primary electron, up to hundreds of low energetic secondary electrons can be produced. Leaving the spectrometer, these electrons will contribute to the background rate. This contribution describes results from simulations for the various background sources. Decays of {sup 219}Rn, emanating from the main vacuum pump, and tritium from the WGTS that reaches the spectrometers are expected to account for most of the background. As a result of the radon alpha decay, electrons are emitted through various processes, such as shake-off, internal conversion and the Auger deexcitations. The corresponding simulations were done using the

Laboratory and Cloud Chamber Studies of Formation Processes and Properties of Atmospheric Ice Particles

NASA Astrophysics Data System (ADS)

Leisner, T.; Abdelmonem, A.; Benz, S.; Brinkmann, M.; Möhler, O.; Rzesanke, D.; Saathoff, H.; Schnaiter, M.; Wagner, R.

2009-04-01

The formation of ice in tropospheric clouds controls the evolution of precipitation and thereby influences climate and weather via a complex network of dynamical and microphysical processes. At higher altitudes, ice particles in cirrus clouds or contrails modify the radiative energy budget by direct interaction with the shortwave and longwave radiation. In order to improve the parameterisation of the complex microphysical and dynamical processes leading to and controlling the evolution of tropospheric ice, laboratory experiments are performed at the IMK Karlsruhe both on a single particle level and in the aerosol and cloud chamber AIDA. Single particle experiments in electrodynamic levitation lend themselves to the study of the interaction between cloud droplets and aerosol particles under extremely well characterized and static conditions in order to obtain microphysical parameters as freezing nucleation rates for homogeneous and heterogeneous ice formation. They also allow the observation of the freezing dynamics and of secondary ice formation and multiplication processes under controlled conditions and with very high spatial and temporal resolution. The inherent droplet charge in these experiments can be varied over a wide range in order to assess the influence of the electrical state of the cloud on its microphysics. In the AIDA chamber on the other hand, these processes are observable under the realistic dynamic conditions of an expanding and cooling cloud- parcel with interacting particles and are probed simultaneously by a comprehensive set of analytical instruments. By this means, microphysical processes can be studied in their complex interplay with dynamical processes as for example coagulation or particle evaporation and growth via the Bergeron - Findeisen process. Shortwave scattering and longwave absorption properties of the nucleating and growing ice crystals are probed by in situ polarised laser light scattering measurements and infrared extinction

Ice nucleation by plant structural materials and its potential contribution to glaciation in clouds

NASA Astrophysics Data System (ADS)

Hiranuma, N.; Hoose, C.; Järvinen, E.; Kiselev, A. A.; Moehler, O.; Schnaiter, M.; Ullrich, R.; Cziczo, D. J.; Felgitsch, L.; Gourihar, K.; Grothe, H.; Reicher, N.; Rudich, Y.; Tobo, Y.; Zawadowicz, M. A.

2015-12-01

Glaciation of supercooled clouds through immersion freezing is an important atmospheric process affecting the formation of precipitation and the Earth's energy budget. Currently, the climatic impact of ice-nucleating particles (INPs) is being reassessed due to increasing evidence of their diversity and abundance in the atmosphere as well as their ability to influence cloud properties. Recently, it has been found that microcrystalline cellulose (MCC; extracted from natural wood pulp) can act as an efficient INP and may add crucial importance to quantify the role of primary biological INP (BINP) in the troposphere. However, it is still unclear if the laboratory results of MCC can be representatively scaled up to the total cellulose content in the atmosphere to assess the overall role of BINPs in clouds and the climate system. Here, we use the AIDA (Aerosol Interaction and Dynamics in the Atmosphere) cloud simulation chamber in Karlsruhe, Germany to demonstrate that several important plant constituents as well as natural plant debris can act as BINPs in simulated super-cooled clouds of the lower and middle troposphere. More specifically, we measured the surface-scaled ice nucleation activity of a total 16 plant structural materials (i.e., celluloses, lignins, lipids and carbohydrates), which were dispersed and immersed in cloud droplets in the chamber, and compared to that of dried leaf powder as a model proxy for atmospheric BINPs. Using these surface-based activities, we developed parameters describing the ice nucleation ability of these particles. Subsequently, we applied them to observed airborne plant debris concentrations and compared to the background INP simulated in a global aerosol model. Our results suggest that cellulose is the most active BINPs amongst the 16 materials and the concentration of ice nucleating cellulose and plant debris to become significant (>0.1 L-1) below about -20 ˚C. Overall, our findings support the view that MCC may be a good proxy

Advances in Understanding the Role of Aerosols on Ice Clouds from the Fifth International Ice Nucleation (FIN) Workshops

NASA Astrophysics Data System (ADS)

Cziczo, D. J.; Moehler, O.; DeMott, P. J.

2015-12-01

The relationship of ambient aerosol particles to the formation of ice-containing clouds is one of the largest uncertainties in understanding climate. This is due to several poorly understood processes including the microphysics of how particles nucleate ice, the number of effective heterogeneous ice nuclei and their atmospheric distribution, the role of anthropogenic activities in producing or changing the behavior of ice forming particles and the interplay between effective heterogeneous ice nuclei and homogeneous ice formation. Our team recently completed a three-part international workshop to improve our understanding of atmospheric ice formation. Termed the Fifth International Ice Nucleation (FIN) Workshops, our motivation was the limited number of measurements and a lack of understanding of how to compare data acquired by different groups. The first activity, termed FIN1, addressed the characterization of ice nucleating particle size, number and chemical composition. FIN2 addressed the determination of ice nucleating particle number density. Groups modeling ice nucleation joined FIN2 to provide insight on measurements critically needed to model atmospheric ice nucleation and to understand the performance of ice chambers. FIN1 and FIN2 took place at the Aerosol Interaction and Dynamics in the Atmosphere (AIDA) chamber at the Karlsruhe Institute of Technology. A particular emphasis of FIN1 and FIN2 was the use of 'blind' intercomparisons using a highly characterized, but unknown to the instrument operators, aerosol sample. The third activity, FIN3, took place at the Desert Research Institute's Storm Peak Laboratory (SPL). A high elevation site not subject to local emissions, SPL allowed for a comparison of ice chambers and subsequent analysis of the ice residuals under the challenging conditions of low particle loading, temperature and pressure found in the atmosphere. The presentation focuses on the improvement in understanding how mass spectra from different

Harmonization of Initial Estimates of Shale Gas Life Cycle Greenhouse Gas Emissions for Electric Power Generation

NASA Astrophysics Data System (ADS)

Hiranuma, N.; Hoose, C.; Järvinen, E.; Kiselev, A. A.; Moehler, O.; Schnaiter, M.; Ullrich, R.; Cziczo, D. J.; Felgitsch, L.; Gourihar, K.; Grothe, H.; Reicher, N.; Rudich, Y.; Tobo, Y.; Zawadowicz, M. A.

2014-12-01

Glaciation of supercooled clouds through immersion freezing is an important atmospheric process affecting the formation of precipitation and the Earth's energy budget. Currently, the climatic impact of ice-nucleating particles (INPs) is being reassessed due to increasing evidence of their diversity and abundance in the atmosphere as well as their ability to influence cloud properties. Recently, it has been found that microcrystalline cellulose (MCC; extracted from natural wood pulp) can act as an efficient INP and may add crucial importance to quantify the role of primary biological INP (BINP) in the troposphere. However, it is still unclear if the laboratory results of MCC can be representatively scaled up to the total cellulose content in the atmosphere to assess the overall role of BINPs in clouds and the climate system. Here, we use the AIDA (Aerosol Interaction and Dynamics in the Atmosphere) cloud simulation chamber in Karlsruhe, Germany to demonstrate that several important plant constituents as well as natural plant debris can act as BINPs in simulated super-cooled clouds of the lower and middle troposphere. More specifically, we measured the surface-scaled ice nucleation activity of a total 16 plant structural materials (i.e., celluloses, lignins, lipids and carbohydrates), which were dispersed and immersed in cloud droplets in the chamber, and compared to that of dried leaf powder as a model proxy for atmospheric BINPs. Using these surface-based activities, we developed parameters describing the ice nucleation ability of these particles. Subsequently, we applied them to observed airborne plant debris concentrations and compared to the background INP simulated in a global aerosol model. Our results suggest that cellulose is the most active BINPs amongst the 16 materials and the concentration of ice nucleating cellulose and plant debris to become significant (>0.1 L-1) below about -20 ˚C. Overall, our findings support the view that MCC may be a good proxy

Insights Regarding Ice Nucleating Particle Measurement Capabilities from Laboratory and Field Measurements During the Fifth International Ice Nucleation Workshop

NASA Astrophysics Data System (ADS)

DeMott, P. J.; Mohler, O.; Cziczo, D. J.; Hiranuma, N.; Brooks, S. D.; Petters, M.

2017-12-01

Improvement in the ability to quantify the role of aerosols in primary ice formation in clouds is vital to improving prediction of natural and anthropogenic impacts on cold cloud properties and reducing uncertainties in climate predictions. A host of common and new methods for quantifying the atmospheric abundance of ice nucleating particles (INPs) have recently been developed. To realize the utility of such data for numerical model parameterization development and validation, it is important to understand similarities, differences, and biases in different methods. To achieve this goal, it is common to challenge instruments with a range of aerosol types in laboratory studies. Only a few comparisons have occurred in atmospheric situations. This presentation highlights comparisons made in laboratory and field phases of the Fifth International Ice Nucleation workshop (FIN) during 2015. The FIN-2 laboratory workshop was conducted at the AIDA facility of the Karlsruhe Institute of Technology, involving nine real-time INP instruments and several sampling methods for wet suspensions and filter collection and resuspension for INP measurements. The FIN-3 atmospheric activity was conducted at the Desert Research Institute's Storm Peak Laboratory (SPL), with a reduced set of participants. Lessons and insights were gained during analyses of data from both workshops regarding the capabilities and comparability of present ice nucleation measurement systems. The FIN-2 and FIN-3 results show typical one order of magnitude agreement within basic measurement types and overall for characterizing the concentrations (over several orders of magnitude dynamic range from -5 to -35 C) of a variety of INP types and ambient INPs active in the immersion-freezing mode. Discrepancies are least for lab sampling of natural soil particle INPs and greatest for materials with steep d[INP]/dT functions, such as K-feldspar or bacterial INPs processed warmer than -8 C. Varied reasons and implications

High-resolution vertical profiles of stable water isotopes from airborne measurements in the western Mediterranean during HyMeX in October 2012

NASA Astrophysics Data System (ADS)

Sodemann, Harald; Aemisegger, Franziska; Pfahl, Stephan; Corsmeier, Ulrich; Wieser, Andreas; Bitter, Mark; Feuerle, Thomas; Hankers, Rudolf; Schulz, Helmut; Hsiao, Gregor; Wernli, Heini

2013-04-01

Stable water isotopes are useful indicators of meteorological processes on a broad range of scales, reflecting for example evaporation, precipitation and airmass mixing processes. Scientific understanding of water isotope meteorology has long been impeded by the sparsity of observational data. Most measurements of precipitation and water vapour have been made at the surface. Both sampling and isotope measurements had been fairly intricate until recently, and required to transfer samples to a lab environment. With the recent advent of fast laser-based spectroscopic methods it has become possible to measure the isotopic composition of atmospheric water vapour in situ at high temporal resolution, enabling to tremendously extend the measurement data base in space and time. Here we present the first set of airborne spectroscopic stable water isotopes measurements in the Mediterranean. Measurements have been acquired by a customised Picarro L2130i instrument with enhanced data acquisition rate by a dual-laser system. The instrument was deployed in cooperation with the Karlsruhe Institute of Technology (KIT) onboard the Dornier 128-6 research aircraft D-IBUF of the Institute of Flight Guidance, TU Braunschweig together with a meteorological flux measurement package during HYMEX in Corsica, France. Taking into account memory effects of the pipe system, the typical time resolution of the measurements was about 30s, resulting in an average spatial resolution of about 2 km. Cross-calibration of the water vapour observations with other humidity sensors showed good agreement in most flight conditions but very turbulent ones. In total 23 successful stable isotope flights have been performed. We report on the measurement setup, calibration procedures and data quality, and a first interpretation of these new airborne observations. A climatological perspective of the vertical stable isotope composition in the vicinity of Corsica during the campaign reveals for the first time

An aerosol chamber investigation of the heterogeneous ice nucleating potential of refractory nanoparticles

NASA Astrophysics Data System (ADS)

Saunders, R. W.; Möhler, O.; Schnaiter, M.; Benz, S.; Wagner, R.; Saathoff, H.; Connolly, P. J.; Burgess, R.; Gallagher, M.; Wills, R.; Murray, B. J.; Plane, J. M. C.

2009-11-01

Nanoparticles of iron oxide (crystalline and amorphous), silicon oxide and magnesium oxide were investigated for their propensity to nucleate ice over the temperature range 180-250 K, using the AIDA chamber in Karlsruhe, Germany. All samples were observed to initiate ice formation via the deposition mode at threshold ice super-saturations (RHi thresh) ranging from 105% to 140% for temperatures below 220 K. Approximately 10% of amorphous Fe2O3 particles (modal diameter = 30 nm) generated in situ from a photochemical aerosol reactor, led to ice nucleation at RHi thresh = 140% at an initial chamber temperature of 182 K. Quantitative analysis using a singular hypothesis treatment provided a fitted function [ns (190 K) = 10(3.33×sice)+8.16] for the variation in ice-active surface site density (ns: m-2) with ice saturation (sice) for Fe2O3 nanoparticles. This was implemented in an aerosol-cloud model to determine a predicted deposition (mass accommodation) coefficient for water vapour on ice of 0.1 at temperatures appropriate for the upper atmosphere. Classical nucleation theory was used to determine representative contact angles (θ) for the different particle compositions. For the in situ generated Fe2O3 particles, a slight inverse temperature dependence was observed with θ = 10.5° at 182 K, decreasing to 9.0° at 200 K (compared with 10.2° and 11.4°, respectively for the SiO2 and MgO particle samples at the higher temperature). These observations indicate that such refractory nanoparticles are relatively efficient materials for the nucleation of ice under the conditions studied in the chamber which correspond to cirrus cloud formation in the upper troposphere. The results also show that Fe2O3 particles do not act as ice nuclei under conditions pertinent for tropospheric mixed phase clouds, which necessarily form above ~233 K. At the lower temperatures (<150 K) where noctilucent clouds form during summer months in the high latitude mesosphere, higher contact

An aerosol chamber investigation of the heterogeneous ice nucleating potential of refractory nanoparticles

NASA Astrophysics Data System (ADS)

Saunders, R. W.; Möhler, O.; Schnaiter, M.; Benz, S.; Wagner, R.; Saathoff, H.; Connolly, P. J.; Burgess, R.; Murray, B. J.; Gallagher, M.; Wills, R.; Plane, J. M. C.

2010-02-01

Nanoparticles of iron oxide (crystalline and amorphous), silicon oxide and magnesium oxide were investigated for their propensity to nucleate ice over the temperature range 180-250 K, using the AIDA chamber in Karlsruhe, Germany. All samples were observed to initiate ice formation via the deposition mode at threshold ice super-saturations (RHithresh) ranging from 105% to 140% for temperatures below 220 K. Approximately 10% of amorphous Fe2O3 particles (modal diameter = 30 nm) generated in situ from a photochemical aerosol reactor, led to ice nucleation at RHithresh = 140% at an initial chamber temperature of 182 K. Quantitative analysis using a singular hypothesis treatment provided a fitted function [ns(190 K)=10(3.33×sice)+8.16] for the variation in ice-active surface site density (ns:m-2) with ice saturation (sice) for Fe2O3 nanoparticles. This was implemented in an aerosol-cloud model to determine a predicted deposition (mass accommodation) coefficient for water vapour on ice of 0.1 at temperatures appropriate for the upper atmosphere. Classical nucleation theory was used to determine representative contact angles (θ) for the different particle compositions. For the in situ generated Fe2O3 particles, a slight inverse temperature dependence was observed with θ = 10.5° at 182 K, decreasing to 9.0° at 200 K (compared with 10.2° and 11.4° respectively for the SiO2 and MgO particle samples at the higher temperature). These observations indicate that such refractory nanoparticles are relatively efficient materials for the nucleation of ice under the conditions studied in the chamber which correspond to cirrus cloud formation in the upper troposphere. The results also show that Fe2O3 particles do not act as ice nuclei under conditions pertinent for tropospheric mixed phase clouds, which necessarily form above ~233 K. At the lower temperatures (<150 K) where noctilucent clouds form during summer months in the high latitude mesosphere, higher contact angles would

Crustal Models Assessment in Western Part of Romania Employing Active Seismic and Seismologic Methods

NASA Astrophysics Data System (ADS)

Bala, Andrei; Toma-Danila, Dragos; Tataru, Dragos; Grecu, Bogdan

2017-12-01

In the years 1999 - 2000 two regional seismic refraction lines were performed within a close cooperation with German partners from University of Karlsruhe. One of these lines is Vrancea 2001, with 420 km in length, almost half of them recorded in Transylvanian Basin. The structure of the crust along the seismic line revealed a very complicated crustal structure beginning with Eastern Carpathians and continuing in the Transylvanian Basin until Medias. As a result of the development of the National Seismic Network in the last ten years, more than 100 permanent broadband stations are now continuously operating in Romania. Complementary to this national dataset, maintained and developed in the National Institute for Earth Physics, new data emerged from the temporary seismologic networks established during the joint projects with European partners in the last decades. The data gathered so far is valuable both for seismology purposes and crustal structure studies, especially for the western part of the country, where this kind of data were sparse until now. Between 2009 and 2011, a new reference model for the Earth’s crust and mantle of the European Plate was defined through the NERIES project from existing data and models. The database gathered from different kind of measurements in Transylvanian Basin and eastern Pannonian Basin were included in this NERIES model and an improved and upgraded model of the Earth crust emerged for western part of Romania. Although the dataset has its origins in several periods over the last 50 years, the results are homogeneous and they improve and strengthen our image about the depth of the principal boundaries in the crust. In the last chapter two maps regarding these boundaries are constructed, one for mid-crustal boundary and one for Moho. They were build considering all the punctual information available from different sources in active seismic and seismology which are introduced in the general maps from the NERIES project for

Validation of MIPAS IMK-IAA Temperature, Water Vapor, and Ozone Profiles with MOHAVE-2009 Campaign Measurements

NASA Technical Reports Server (NTRS)

Stiller, Gabrielle; Kiefer, M.; Eckert, E.; von Clarmann, T.; Kellmann, S.; Garcia-Comas, M.; Funke, B.; Leblanc, T.; Fetzer, E.; Froidevaux, L.;

Comparison of atmospheric CO2 columns at high latitudes from ground-based and satellite-based methods

NASA Astrophysics Data System (ADS)

Jacobs, N.; Simpson, W. R.; Parker, H. A.; Tu, Q.; Blumenstock, T.; Dubey, M. K.; Hase, F.; Osterman, G. B.

2017-12-01

Total column measurements of carbon-dioxide (CO2) from the Orbiting Carbon Observatory-2 (OCO-2) satellite have been validated at mid-latitudes by comparison to the Total Carbon Column Observing Network (TCCON), but there are still a limited number of sites providing high-latitude validation data for satellite observations of CO2, and no TCCON sites in Alaska. To understand the global distribution of CO2 sources and sinks, it is essential that we increase the abundance of validation sites, particularly in the climate-sensitive high-latitude Boreal forest. Therefore, we began the Arctic Mobile Infrared Greenhouse Gas Observations (AMIGGO) campaign in the Boreal Forest region around Fairbanks, Alaska with the goal of satellite validation and measurement of natural ecosystem fluxes. In this campaign, we used the EM27/SUN mobile solar-viewing Fourier-transform infrared spectrometer (EM27/SUN FTS) to retrieve the total CO2 column and column-averaged dry-air mole fraction of CO2 (XCO2) with the GGG2014 algorithm. The EM27/SUN FTS was developed by the Karlsruhe Institute of Technology (KIT) in collaboration with Bruker optics (Gisi et al., 2012, doi:10.5194/amt-5-2969-2012) and has been deployed in urban areas to measure anthropogenic fluxes of CO2 and CH4. To evaluate the EM27/SUN performance, co-located observations were made with two EM27/SUN spectrometers, and we found that XCO2 differences between spectrometers were small (0.24ppm on average) and very stable over time. In this presentation, we report on 14 OCO-2 targeted overpasses that occurred from August 2016 through July 2017, along with additional targets obtained during ongoing observations in 2017. We investigate underlying reasons for observed differences between OCO-2 and ground-based XCO2 using methods developed by Wunch et al. (2017, doi:10.5194/amt-10-2209-2017). As an additional point of comparison, coincident aircraft observations by NOAA Earth System Research Laboratory (ESRL) Global Monitoring

re3data.org - a global registry of research data repositories

NASA Astrophysics Data System (ADS)

Pampel, Heinz; Vierkant, Paul; Elger, Kirsten; Bertelmann, Roland; Witt, Michael; Schirmbacher, Peter; Rücknagel, Jessika; Kindling, Maxi; Scholze, Frank; Ulrich, Robert

2016-04-01

re3data.org - the registry of research data repositories lists over 1,400 research data repositories from all over the world making it the largest and most comprehensive online catalog of research data repositories on the web. The registry is a valuable tool for researchers, funding organizations, publishers and libraries. re3data.org provides detailed information about research data repositories, and its distinctive icons help researchers to easily identify relevant repositories for accessing and depositing data sets [1]. Funding agencies, like the European Commission [2] and research institutions like the University of Bielefeld [3] already recommend the use of re3data.org in their guidelines and policies. Several publishers and journals like Copernicus Publications, PeerJ, and Nature's Scientific Data recommend re3data.org in their editorial policies as a tool for the easy identification of appropriate data repositories to store research data. Project partners in re3data.org are the Library and Information Services department (LIS) of the GFZ German Research Centre for Geosciences, the Computer and Media Service at the Humboldt-Universität zu Berlin, the Purdue University Libraries and the KIT Library at the Karlsruhe Institute of Technology (KIT). After its fusion with the U.S. American DataBib in 2014, re3data.org continues as a service of DataCite from 2016 on. DataCite is the international organization for the registration of Digital Object Identifiers (DOI) for research data and aims to improve their citation. The poster describes the current status and the future plans of re3data.org. [1] Pampel H, et al. (2013) Making Research Data Repositories Visible: The re3data.org Registry. PLoS ONE 8(11): e78080. doi:10.1371/journal.pone.0078080. [2] European Commission (2015): Guidelines on Open Access to Scientific Publications and Research Data in Horizon 2020. Available: http://ec.europa.eu/research/participants/data/ref/h2020/grants_manual/hi/oa_pilot/h2020-hi

New insights of seismic disturbances due to wind turbines - long and short term measurements in SW Germany

NASA Astrophysics Data System (ADS)

Zieger, Toni; Ritter, Joachim

2017-04-01

Natural Resources" and "KArlsruher BroadBand Array (KABBA)". Meteorological data were provided by "KIT Institute of Meteorology and Climate Research - Department Troposphere Research".

High variability of the heterogeneous ice nucleation potential of oxalic acid dihydrate and sodium oxalate

NASA Astrophysics Data System (ADS)

Wagner, R.; Möhler, O.; Saathoff, H.; Schnaiter, M.; Leisner, T.

2010-04-01

The heterogeneous ice nucleation potential of airborne oxalic acid dihydrate and sodium oxalate particles in the deposition and condensation mode has been investigated by controlled expansion cooling cycles in the AIDA aerosol and cloud chamber of the Karlsruhe Institute of Technology at temperatures between 244 and 228 K. Previous laboratory studies have highlighted the particular role of oxalic acid dihydrate as the only species amongst a variety of other investigated dicarboxylic acids to be capable of acting as a heterogeneous ice nucleus in both the deposition and immersion mode. We could confirm a high deposition mode ice activity for 0.03 to 0.8 μm sized oxalic acid dihydrate particles that were either formed by nucleation from a gaseous oxalic acid/air mixture or by rapid crystallisation of highly supersaturated aqueous oxalic acid solution droplets. The critical saturation ratio with respect to ice required for deposition nucleation was found to be less than 1.1 and the size-dependent ice-active fraction of the aerosol population was in the range from 0.1 to 22%. In contrast, oxalic acid dihydrate particles that had crystallised from less supersaturated solution droplets and had been allowed to slowly grow in a supersaturated environment from still unfrozen oxalic acid solution droplets over a time period of several hours were found to be much poorer heterogeneous ice nuclei. We speculate that under these conditions a crystal surface structure with less-active sites for the initiation of ice nucleation was generated. Such particles partially proved to be almost ice-inactive in both the deposition and condensation mode. At times, the heterogeneous ice nucleation ability of oxalic acid dihydrate significantly changed when the particles had been processed in preceding cloud droplet activation steps. Such behaviour was also observed for the second investigated species, namely sodium oxalate. Our experiments address the atmospheric scenario that coating layers

High variability of the heterogeneous ice nucleation potential of oxalic acid dihydrate and sodium oxalate

NASA Astrophysics Data System (ADS)

Wagner, R.; Möhler, O.; Saathoff, H.; Schnaiter, M.; Leisner, T.

2010-08-01

The heterogeneous ice nucleation potential of airborne oxalic acid dihydrate and sodium oxalate particles in the deposition and condensation mode has been investigated by controlled expansion cooling cycles in the AIDA aerosol and cloud chamber of the Karlsruhe Institute of Technology at temperatures between 244 and 228 K. Previous laboratory studies have highlighted the particular role of oxalic acid dihydrate as the only species amongst a variety of other investigated dicarboxylic acids to be capable of acting as a heterogeneous ice nucleus in both the deposition and immersion mode. We could confirm a high deposition mode ice activity for 0.03 to 0.8 μm sized oxalic acid dihydrate particles that were either formed by nucleation from a gaseous oxalic acid/air mixture or by rapid crystallisation of highly supersaturated aqueous oxalic acid solution droplets. The critical saturation ratio with respect to ice required for deposition nucleation was found to be less than 1.1 and the size-dependent ice-active fraction of the aerosol population was in the range from 0.1 to 22%. In contrast, oxalic acid dihydrate particles that had crystallised from less supersaturated solution droplets and had been allowed to slowly grow in a supersaturated environment from still unfrozen oxalic acid solution droplets over a time period of several hours were found to be much poorer heterogeneous ice nuclei. We speculate that under these conditions a crystal surface structure with less-active sites for the initiation of ice nucleation was generated. Such particles partially proved to be almost ice-inactive in both the deposition and condensation mode. At times, the heterogeneous ice nucleation ability of oxalic acid dihydrate significantly changed when the particles had been processed in preceding cloud droplet activation steps. Such behaviour was also observed for the second investigated species, namely sodium oxalate. Our experiments address the atmospheric scenario that coating layers

[A historic case of Wegener's granulomatosis: the physicist who discovered the electromagnetic waves: Heinrich Hertz].

PubMed

Feldmann, H

2005-06-01

A diary and an extensive correspondence of Heinrich Hertz and his family provide a meticulous documentation of his life, made available by Albrecht Folsing in 1997 through a carefully investigated biography, which permit the conclusion that H. Hertz died of Wegener's granulomatosis, 45 years before this disease had been explored. WEGENER'S GRANULOMATOSIS: The symptoms of the granulomatosis, that was first described by Friedrich Wegener in 1936 and 1939 are presented in short with literal quotations of the author: It begins with a refractory cold that will last until the end, then follow involvement of the paranasal sinuses, ears, mucous lining of mouth and pharynx, slight fever, weakness, in the final phase dissemination with nephritis, septic fever, arthritis, myalgia, paralyses leading to total immobility, exitus. The etiology is not fully understood but probably based on immunoreaction. H. HERTZ: CURRICULUM VITAE: Born in Hamburg, Germany, in 1857: after secondary school academic training in physics at Dresden, Munic and Berlin. 1885 professor of physics in Karlsruhe, then starting in 1889 at Bonn. 1887/88 exploration of the electromagnetic waves, now the basis for all radio communication, and exploration of the photoelectric effect, the basis of solar techniques. Numerous highranking distinctions. H. HERTZ: The case history is presented in detail based on numerous literal quotations from personal letters and the diary. After a few banal affections involving the teeth and toes the systemic disease became manifest in summer 1892 with a refractory cold which remained the focus of treatment until death. Granulation tissue in the nose that was excised several times: no tuberculosis, no carcinoma. Otitis with purulent mastoiditis, in October 1892 mastoidectomy, persistent purulence. Early in 1893 diagnosis of nephritis. Extraction of a superior tooth, punturing of the maxillary sinus, then twice radical opening of the maxillary sinus. Painful ankylosis and paralyses

Crustal investigations of the earthquake-prone Vrancea region in Romania - Part 2: Novel deep seismic reflection experiment in the southeastern Carpathian belt and its foreland basin - survey target, design, and first results

NASA Astrophysics Data System (ADS)

Mocanu, V. I.; Stephenson, R. A.; Diaconescu, C. C.; Knapp, J. H.; Matenco, L.; Dinu, C.; Harder, S.; Prodehl, C.; Hauser, F.; Raileanu, V.; Cloetingh, S. A.; Leever, K.

2001-12-01

Seismic studies of the outer Carpathian Orogen and its foreland (Focsani Basin) in the vicinity of the Vrancea Zone and Danube Delta (Romania) forms one component of a new multidisciplinary initiative of ISES (Netherlands Centre for Integrated Solid Earth Sciences) called DACIA PLAN ("Danube and Carpathian Integrated Action on Processes in the Lithosphere and Neotectonics"). The study area, at the margin of the European craton, constitutes one of the most active seismic zones in Europe, yet has remained a geological and geodynamic enigma within the Alpine-Himalayan orogenic system. Intermediate depth (50-220 km) mantle earthquakes of significant magnitude occur in a geographically restricted area in the south-east Carpathians bend. The adjacent, foreland Focsani Basin appears to exhibit recent extensional deformation in what is otherwise understood to be a zone of convergence. The deep seismic reflection component of DACIA PLAN comprises a ~140-km near-vertical profile across the Vrancea Zone and Focsani Basin. Data acquisition took place in August-September 2001, as part of the integrated refraction/reflection seismic field programme "Vrancea-2001" co-ordinated at Karlsruhe University (cf. Abstract, Part 1), utilising 640 independently deployed recorders provided by UTEP and IRIS/PASSCAL ("Texans"). Station spacing was every 100-m with shots every 1-km. These data are to be integrated with industry seismic as well as planned new medium-high resolution seismic reflection profiling across key neotectonically active structures in the Focsani Basin. Particular goals of DACIA PLAN include: (1) the architecture of the Tertiary/Quaternary basins developed within and adjacent to this zone, including the foreland Focsani Basin; (2) the presence and geometry of structural detachment(s) in relation with foreland basin development, including constraints for balanced cross-sections and geodynamic modelling of basin origin and evolution; (3) the relationship between crustal

Simulation of earthquake caused building damages for the development of fast reconnaissance techniques

NASA Astrophysics Data System (ADS)

Schweier, C.; Markus, M.; Steinle, E.

2004-04-01

Catastrophic events like strong earthquakes can cause big losses in life and economic values. An increase in the efficiency of reconnaissance techniques could help to reduce the losses in life as many victims die after and not during the event. A basic prerequisite to improve the rescue teams' work is an improved planning of the measures. This can only be done on the basis of reliable and detailed information about the actual situation in the affected regions. Therefore, a bundle of projects at Karlsruhe university aim at the development of a tool for fast information retrieval after strong earthquakes. The focus is on urban areas as the most losses occur there. In this paper the approach for a damage analysis of buildings will be presented. It consists of an automatic methodology to model buildings in three dimensions, a comparison of pre- and post-event models to detect changes and a subsequent classification of the changes into damage types. The process is based on information extraction from airborne laserscanning data, i.e. digital surface models (DSM) acquired through scanning of an area with pulsed laser light. To date, there are no laserscanning derived DSMs available to the authors that were taken of areas that suffered damages from earthquakes. Therefore, it was necessary to simulate such data for the development of the damage detection methodology. In this paper two different methodologies used for simulating the data will be presented. The first method is to create CAD models of undamaged buildings based on their construction plans and alter them artificially in such a way as if they had suffered serious damage. Then, a laserscanning data set is simulated based on these models which can be compared with real laserscanning data acquired of the buildings (in intact state). The other approach is to use measurements of actual damaged buildings and simulate their intact state. It is possible to model the geometrical structure of these damaged buildings based

Mobility of engineered inorganic nanoparticles in porous media

NASA Astrophysics Data System (ADS)

Metreveli, George; Heidmann, Ilona; Schaumann, Gabriele Ellen

2013-04-01

Besides the excellent properties and great potential for various industrial, medical, pharmaceutical, cosmetic, and life science applications, engineered inorganic nanoparticles (EINP) can show also disadvantages concerning increasing risk potential with increasing application, if they are released in the environmental systems. EINP can influence microbial activity and can show toxic effects (Fabrega et al., 2009). Similar to the inorganic natural colloids, EINP can be transported in soil and groundwater systems (Metreveli et al., 2005). Furthermore, due to the large surface area and high sorption and complex formation capacity, EINP can facilitate transport of different contaminants. In this study the mobility behaviour of EINP and their effect on the transport of different metal(loid) species in water saturated porous media was investigated. For these experiments laboratory column system was used. The column was filled with quartz sand. The interactions between EINP and metal(loid)s were characterised by coupling of asymmetrical flow field flow fractionation (AF4) with inductively coupled plasma mass spectrometer (ICP-MS). As EINP laponite (synthetic three layer clay mineral), and as metal(loid)s Cu, Pb, Zn, Pt and As were used. In AF4 experiments sorption of metal(loid)s on the surface of EINP could be observed. The extent of interactions was influenced by pH value and was different for different metal(loid)s. Laboratory column experiments showed high mobility of EINP, which facilitated transport of most of metal(loid)s in water saturated porous media. Furthermore the migration of synthetic silver nanoparticles in natural soil columns was determined in leaching experiments. Acknowledgement Financial support by German Research Council (DFG) and Max-Buchner-Research Foundation (MBFSt) is gratefully acknowledged. We thank Karlsruhe Institute of Technology (KIT) for the opportunity to perform the column and AF4 experiments. References: Fabrega, J., Fawcett, S. R

Intercomparison study and optical asphericity measurements of small ice particles in the CERN CLOUD experiment

NASA Astrophysics Data System (ADS)

Nichman, Leonid; Järvinen, Emma; Dorsey, James; Connolly, Paul; Duplissy, Jonathan; Fuchs, Claudia; Ignatius, Karoliina; Sengupta, Kamalika; Stratmann, Frank; Möhler, Ottmar; Schnaiter, Martin; Gallagher, Martin

2017-09-01

Optical probes are frequently used for the detection of microphysical cloud particle properties such as liquid and ice phase, size and morphology. These properties can eventually influence the angular light scattering properties of cirrus clouds as well as the growth and accretion mechanisms of single cloud particles. In this study we compare four commonly used optical probes to examine their response to small cloud particles of different phase and asphericity. Cloud simulation experiments were conducted at the Cosmics Leaving OUtdoor Droplets (CLOUD) chamber at European Organisation for Nuclear Research (CERN). The chamber was operated in a series of multi-step adiabatic expansions to produce growth and sublimation of ice particles at super- and subsaturated ice conditions and for initial temperatures of -30, -40 and -50 °C. The experiments were performed for ice cloud formation via homogeneous ice nucleation. We report the optical observations of small ice particles in deep convection and in situ cirrus simulations. Ice crystal asphericity deduced from measurements of spatially resolved single particle light scattering patterns by the Particle Phase Discriminator mark 2 (PPD-2K, Karlsruhe edition) were compared with Cloud and Aerosol Spectrometer with Polarisation (CASPOL) measurements and image roundness captured by the 3View Cloud Particle Imager (3V-CPI). Averaged path light scattering properties of the simulated ice clouds were measured using the Scattering Intensity Measurements for the Optical detectioN of icE (SIMONE) and single particle scattering properties were measured by the CASPOL. We show the ambiguity of several optical measurements in ice fraction determination of homogeneously frozen ice in the case where sublimating quasi-spherical ice particles are present. Moreover, most of the instruments have difficulties of producing reliable ice fraction if small aspherical ice particles are present, and all of the instruments cannot separate perfectly

Public understanding of geoscientific topics

NASA Astrophysics Data System (ADS)

Münch, Ute; Lauterjung, Jörn

2014-05-01

Centre Geesthacht, Centre for Materials and Coastal Research (HZG). Further participating centres are: the Alfred-Wegener-Institute for Polar and Marine Research (AWI), the German Aerospace Center (DLR), the Research Centre Jülich (FZJ), the Helmholtz-Centre for Ocean Sciences (GEOMAR), the Karlsruher Institute for Technology (KIT) and the Helmholtz Centre for Environmental Research (UFZ). The webpage will be accessible at www.eskp.de.

Ice Nucleation Activity of Various Agricultural Soil Dust Aerosol Particles

NASA Astrophysics Data System (ADS)

Schiebel, Thea; Höhler, Kristina; Funk, Roger; Hill, Thomas C. J.; Levin, Ezra J. T.; Nadolny, Jens; Steinke, Isabelle; Suski, Kaitlyn J.; Ullrich, Romy; Wagner, Robert; Weber, Ines; DeMott, Paul J.; Möhler, Ottmar

2016-04-01

Recent investigations at the cloud simulation chamber AIDA (Aerosol Interactions and Dynamics in the Atmosphere) suggest that agricultural soil dust has an ice nucleation ability that is enhanced up to a factor of 10 compared to desert dust, especially at temperatures above -26 °C (Steinke et al., in preparation for submission). This enhancement might be caused by the contribution of very ice-active biological particles. In addition, soil dust aerosol particles often contain a considerably higher amount of organic matter compared to desert dust particles. To test agricultural soil dust as a source of ice nucleating particles, especially for ice formation in warm clouds, we conducted a series of laboratory measurements with different soil dust samples to extend the existing AIDA dataset. The AIDA has a volume of 84 m3 and operates under atmospherically relevant conditions over wide ranges of temperature, pressure and humidity. By controlled adiabatic expansions, the ascent of an air parcel in the troposphere can be simulated. As a supplement to the AIDA facility, we use the INKA (Ice Nucleation Instrument of the KArlsruhe Institute of Technology) continuous flow diffusion chamber based on the design by Rogers (1988) to expose the sampled aerosol particles to a continuously increasing saturation ratio by keeping the aerosol temperature constant. For our experiments, soil dust was dry dispersed into the AIDA vessel. First, fast saturation ratio scans at different temperatures were performed with INKA, sampling soil dust aerosol particles directly from the AIDA vessel. Then, we conducted the AIDA expansion experiment starting at a preset temperature. The combination of these two different methods provides a robust data set on the temperature-dependent ice activity of various agriculture soil dust aerosol particles with a special focus on relatively high temperatures. In addition, to extend the data set, we investigated the role of biological and organic matter in more

Merged ozone profiles from four MIPAS processors

NASA Astrophysics Data System (ADS)

Laeng, Alexandra; von Clarmann, Thomas; Stiller, Gabriele; Dinelli, Bianca Maria; Dudhia, Anu; Raspollini, Piera; Glatthor, Norbert; Grabowski, Udo; Sofieva, Viktoria; Froidevaux, Lucien; Walker, Kaley A.; Zehner, Claus

2017-04-01

The Michelson Interferometer for Passive Atmospheric Sounding (MIPAS) was an infrared (IR) limb emission spectrometer on the Envisat platform. Currently, there are four MIPAS ozone data products, including the operational Level-2 ozone product processed at ESA, with the scientific prototype processor being operated at IFAC Florence, and three independent research products developed by the Istituto di Fisica Applicata Nello Carrara (ISAC-CNR)/University of Bologna, Oxford University, and the Karlsruhe Institute of Technology-Institute of Meteorology and Climate Research/Instituto de Astrofísica de Andalucía (KIT-IMK/IAA). Here we present a dataset of ozone vertical profiles obtained by merging ozone retrievals from four independent Level-2 MIPAS processors. We also discuss the advantages and the shortcomings of this merged product. As the four processors retrieve ozone in different parts of the spectra (microwindows), the source measurements can be considered as nearly independent with respect to measurement noise. Hence, the information content of the merged product is greater and the precision is better than those of any parent (source) dataset. The merging is performed on a profile per profile basis. Parent ozone profiles are weighted based on the corresponding error covariance matrices; the error correlations between different profile levels are taken into account. The intercorrelations between the processors' errors are evaluated statistically and are used in the merging. The height range of the merged product is 20-55 km, and error covariance matrices are provided as diagnostics. Validation of the merged dataset is performed by comparison with ozone profiles from ACE-FTS (Atmospheric Chemistry Experiment-Fourier Transform Spectrometer) and MLS (Microwave Limb Sounder). Even though the merging is not supposed to remove the biases of the parent datasets, around the ozone volume mixing ratio peak the merged product is found to have a smaller (up to 0.1 ppmv

Magnesium Diboride Current Leads

NASA Technical Reports Server (NTRS)

Panek, John

2010-01-01

A recently discovered superconductor, magnesium diboride (MgB2), can be used to fabricate conducting leads used in cryogenic applications. Dis covered to be superconducting in 2001, MgB2 has the advantage of remaining superconducting at higher temperatures than the previously used material, NbTi. The purpose of these leads is to provide 2 A of electricity to motors located in a 1.3 K environment. The providing environment is a relatively warm 17 K. Requirements for these leads are to survive temperature fluctuations in the 5 K and 11 K heat sinks, and not conduct excessive heat into the 1.3 K environment. Test data showed that each lead in the assembly could conduct 5 A at 4 K, which, when scaled to 17 K, still provided more than the required 2 A. The lead assembly consists of 12 steelclad MgB2 wires, a tensioned Kevlar support, a thermal heat sink interface at 4 K, and base plates. The wires are soldered to heavy copper leads at the 17 K end, and to thin copper-clad NbTi leads at the 1.3 K end. The leads were designed, fabricated, and tested at the Forschungszentrum Karlsruhe - Institut foer Technische Physik before inclusion in Goddard's XRS (X-Ray Spectrometer) instrument onboard the Astro-E2 spacecraft. A key factor is that MgB2 remains superconducting up to 30 K, which means that it does not introduce joule heating as a resistive wire would. Because the required temperature ranges are 1.3-17 K, this provides a large margin of safety. Previous designs lost superconductivity at around 8 K. The disadvantage to MgB2 is that it is a brittle ceramic, and making thin wires from it is challenging. The solution was to encase the leads in thin steel tubes for strength. Previous designs were so brittle as to risk instrument survival. MgB2 leads can be used in any cryogenic application where small currents need to be conducted at below 30 K. Because previous designs would superconduct only at up to 8 K, this new design would be ideal for the 8-30 K range.

Real-time Forensic Disaster Analysis

NASA Astrophysics Data System (ADS)

Wenzel, F.; Daniell, J.; Khazai, B.; Mühr, B.; Kunz-Plapp, T.; Markus, M.; Vervaeck, A.

2012-04-01

The Center for Disaster Management and Risk Reduction Technology (CEDIM, www.cedim.de) - an interdisciplinary research center founded by the German Research Centre for Geoscience (GFZ) and Karlsruhe Institute of Technology (KIT) - has embarked on a new style of disaster research known as Forensic Disaster Analysis. The notion has been coined by the Integrated Research on Disaster Risk initiative (IRDR, www.irdrinternational.org) launched by ICSU in 2010. It has been defined as an approach to studying natural disasters that aims at uncovering the root causes of disasters through in-depth investigations that go beyond the reconnaissance reports and case studies typically conducted after disasters. In adopting this comprehensive understanding of disasters CEDIM adds a real-time component to the assessment and evaluation process. By comprehensive we mean that most if not all relevant aspects of disasters are considered and jointly analysed. This includes the impact (human, economy, and infrastructure), comparisons with recent historic events, social vulnerability, reconstruction and long-term impacts on livelihood issues. The forensic disaster analysis research mode is thus best characterized as "event-based research" through systematic investigation of critical issues arising after a disaster across various inter-related areas. The forensic approach requires (a) availability of global data bases regarding previous earthquake losses, socio-economic parameters, building stock information, etc.; (b) leveraging platforms such as the EERI clearing house, relief-web, and the many sources of local and international sources where information is organized; and (c) rapid access to critical information (e.g., crowd sourcing techniques) to improve our understanding of the complex dynamics of disasters. The main scientific questions being addressed are: What are critical factors that control loss of life, of infrastructure, and for economy? What are the critical interactions

Source apportionment studies on particulate matter in Beijing/China

NASA Astrophysics Data System (ADS)

Suppan, P.; Shen, R.; Shao, L.; Schrader, S.; Schäfer, K.; Norra, S.; Vogel, B.; Cen, K.; Wang, Y.

2013-05-01

More than 15 million people in the greater area of Beijing are still suffering from severe air pollution levels caused by sources within the city itself but also from external impacts like severe dust storms and long range advection from the southern and central part of China. Within this context particulate matter (PM) is the major air pollutant in the greater area of Beijing (Garland et al., 2009). PM did not serve only as lead substance for air quality levels and therefore for adverse health impact effects but also for a strong influence on the climate system by changing e.g. the radiative balance. Investigations on emission reductions during the Olympic Summer Games in 2008 have caused a strong reduction on coarser particles (PM10) but not on smaller particles (PM2.5). In order to discriminate the composition of the particulate matter levels, the different behavior of coarser and smaller particles investigations on source attribution, particle characteristics and external impacts on the PM levels of the city of Beijing by measurements and modeling are performed: a) Examples of long term measurements of PM2.5 filter sampling in 2010/2011 with the objectives of detailed chemical (source attribution, carbon fraction, organic speciation and inorganic composition) and isotopic analyses as well as toxicological assessment in cooperation with several institutions (Karlsruhe Institute of Technology (IfGG/IMG), Helmholtz Zentrum München (HMGU), University Rostock (UR), Chinese University of Mining and Technology Beijing, CUMTB) will be discussed. b) The impact of dust storm events on the overall pollution level of particulate matter in the greater area of Beijing is being assessed by the online coupled comprehensive model system COSMO-ART. First results of the dust storm modeling in northern China (2011, April 30th) demonstrates very well the general behavior of the meteorological parameters temperature and humidity as well as a good agreement between modeled and

Regional Climate Simulations with COSMO-CLM for West Africa using three different soil-vegetation-atmosphere-transfer (SVAT) module

NASA Astrophysics Data System (ADS)

Breil, Marcus; Panitz, Hans-Jürgen

2014-05-01

Climate predictions on decadal timescales constitute a new field of research, closing the gap between short-term and seasonal weather predictions and long-term climate projections. Therefore, the Federal Ministry of Education and Research in Germany (BMBF) has recently funded the research program MiKlip (Mittelfristige Klimaprognosen), which aims to create a model system that can provide reliable decadal climate forecasts. Recent studies have suggested that one region with high potential decadal predictability is West Africa. Therefore, the project DEPARTURE (DEcadal Prediction of African Rainfall and ATlantic HURricanE Activity) was established within the MiKlip program to assess the feasibility and the potential added value of regional decadal climate predictions for West Africa. To quantify the potential decadal climate predictability, a multi-model approach with the three different regional climate models REMO, WRF and COSMO-CLM (CCLM) will be realized. The presented research will contribute to DEPARTURE by performing hindcast ensemble simulations with CCLM, driven by global decadal MPI-ESM-LR simulations. Thereby, one focus is on the dynamic soil-vegetation-climate interaction on decadal timescales. Recent studies indicate that there are significant feedbacks between the land-surface and the atmosphere, which might influence the decadal climate variability substantially. To investigate this connection, two different SVATs (Community Land Model (CLM), and VEG3D) will be coupled with the CCLM, replacing TERRA_ML, the standard SVAT implemented in CCLM. Thus, sensitive model parameters shall be identified, whereby the understanding of important processes might be improved. As a first step, TERRA_ML is substituted by VEG3D, a SVAT developed at the IMK-TRO, Karlsruhe, Germany. Compared to TERRA_ML, VEG3D includes an explicit vegetation layer by using a big leaf approach, inducing higher correlations with observations as it has been shown in previous studies. The

The DACCIWA 2016 radiosonde campaign in southern West Africa

NASA Astrophysics Data System (ADS)

Fink, Andreas H.; Maranan, Marlon; Knippertz, Peter; Ngamini, Jean-Blaise; Francis, Sabastine

2017-04-01

Operational upper-air stations are very sparsely distributed over West Africa, resulting in the necessity to enhance radiosonde observations for the DACCIWA (Dynamics-Aerosol-Chemistry-Cloud Interactions in West Africa) experimental period during June-July 2016. Building on the AMMA (African Monsoon - Multidisciplinary Analyses) experience, existing infrastructures, as well as human networks, the upper air network was successfully augmented to a spatial density that is unprecedented for southern West Africa. Altogether, more than 750 experimental radiosondes were launched at seven stations in three countries along the Guinea Coast. From its outset, the DACCIWA radiosonde campaign had three pillars: (a) enhancing soundings at operational or quiescent AMMA radiosonde stations; (b) launching sondes at DACCIWA supersites and two additional DACCIWA field sites; and (c) collecting standard and - if possible - high-resolution data from other operational RS stations. In terms of (a), it was found during preparing recce visits to West Africa, that the AMMA-activated stations of Cotonou (Benin) and Abuja (Nigeria) were operational though almost "invisible" on the World Meteorological Organisation's Global Teleconnection System (GTS). These and other AMMA legacies facilitated the implementation of enhanced, four-times daily soundings at Abidjan (Ivory Coast), Cotonou and Parakou (both Benin). Two well-instrumented DACCIWA ground sites at Kumasi (Ghana) and Savé (Benin) performed 06 UTC soundings, being enhanced to four-times daily ascents during fifteen Intensive Observing Periods (IOPs). In addition, research staff and students from the Karlsruhe Institute of Technology (KIT) and African partners conducted up to five-times daily soundings at Lamto (Ivory Coast) and Accra (Ghana). Almost all of the experimental DACCIWA ascents were submitted to the GTS in real time and assimilated at least at three European numerical weather prediction centres that helped to improve their

Diabetes-related information-seeking behaviour: a systematic review.

PubMed

Kuske, Silke; Schiereck, Tim; Grobosch, Sandra; Paduch, Andrea; Droste, Sigrid; Halbach, Sarah; Icks, Andrea

2017-10-24

Information-seeking behaviour is necessary to improve knowledge on diabetes therapy and complications. Combined with other self-management skills and autonomous handling of the disease, it is essential for achieving treatment targets. However, a systematic review addressing this topic is lacking. The aims of this systematic review were to identify and analyse existing knowledge of information-seeking behaviour: (1) types information-seeking behaviour, (2) information sources, (3) the content of searched information, and (4) associated variables that may affect information-seeking behaviour. The systematic review follows the Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) requirements. MEDLINE, CINAHL, EMBASE, ScienceDirect, PsycInfo, Cochrane Library, Web of Science, CCMed, ERIC, Journals@OVID, Deutsches Ärzteblatt and Karlsruher virtueller Katalog (KvK) databases were searched. Publications dealing with information-seeking behaviour of people with diabetes mellitus published up to June 2015 were included. A forward citation tracking was performed in September 2016 and June 2017. Additionally, an update of the two main databases (MEDLINE, CINAHL) was conducted, considering studies published up to July 2017. Studies published in languages other than English or German were excluded, as well as letters, short reports, editorials, comments and discussion papers. A study selection and the critical appraisal of the selected studies were performed independently by two reviewers. A third reviewer was consulted if any disagreement was found. Data extraction and content analysis were performed using selected dimensions of Wilson's 'model of information behaviour'. Twenty-six studies were included. Five 'types of information-seeking behaviour' were identified, e.g. passive and active search. The 'Internet' and 'healthcare professionals' were the most frequently reported sources. 'Diet', 'complications', 'exercise' and 'medications and

Inverse modelling of CH4 emissions for 2010-2011 using different satellite retrieval products from GOSAT and SCIAMACHY

NASA Astrophysics Data System (ADS)

Alexe, M.; Bergamaschi, P.; Segers, A.; Detmers, R.; Butz, A.; Hasekamp, O.; Guerlet, S.; Parker, R.; Boesch, H.; Frankenberg, C.; Scheepmaker, R. A.; Dlugokencky, E.; Sweeney, C.; Wofsy, S. C.; Kort, E. A.

2015-01-01

At the beginning of 2009 new space-borne observations of dry-air column-averaged mole fractions of atmospheric methane (XCH4) became available from the Thermal And Near infrared Sensor for carbon Observations-Fourier Transform Spectrometer (TANSO-FTS) instrument on board the Greenhouse Gases Observing SATellite (GOSAT). Until April 2012 concurrent {methane (CH4) retrievals} were provided by the SCanning Imaging Absorption spectroMeter for Atmospheric CartograpHY (SCIAMACHY) instrument on board the ENVironmental SATellite (ENVISAT). The GOSAT and SCIAMACHY XCH4 retrievals can be compared during the period of overlap. We estimate monthly average CH4 emissions between January 2010 and December 2011, using the TM5-4DVAR inverse modelling system. In addition to satellite data, high-accuracy measurements from the Cooperative Air Sampling Network of the National Oceanic and Atmospheric Administration Earth System Research Laboratory (NOAA ESRL) are used, providing strong constraints on the remote surface atmosphere. We discuss five inversion scenarios that make use of different GOSAT and SCIAMACHY XCH4 retrieval products, including two sets of GOSAT proxy retrievals processed independently by the Netherlands Institute for Space Research (SRON)/Karlsruhe Institute of Technology (KIT), and the University of Leicester (UL), and the RemoTeC "Full-Physics" (FP) XCH4 retrievals available from SRON/KIT. The GOSAT-based inversions show significant reductions in the root mean square (rms) difference between retrieved and modelled XCH4, and require much smaller bias corrections compared to the inversion using SCIAMACHY retrievals, reflecting the higher precision and relative accuracy of the GOSAT XCH4. Despite the large differences between the GOSAT and SCIAMACHY retrievals, 2-year average emission maps show overall good agreement among all satellite-based inversions, with consistent flux adjustment patterns, particularly across equatorial Africa and North America. Over North

Modelling the costs of natural hazards in games

NASA Astrophysics Data System (ADS)

Bostenaru-Dan, M.

2012-04-01

planning, as in the regional planning curricula at the Karlsruhe Institute of Technology, including a role playing game based on the Green Revolution Game, which builds the basis for getting data for further project study. This one included natural hazards such as drought, and their costs. They also play a role in building public space, as in case of "Habitat", which was designed to activate the civil society in café. City investigation games may not take only the shape of computer or board games, they may be played in a wider city environment. From activation of public spaces in frame of cultural capitals in Austria, there are models of urban "races" to find landmarks, such as Klosterrallye in Karlsruhe, Germany, also included as a step at another geographic scale in the "Green CCA" game developed at the Canadian Centre for Architecture. Simpler games include the use of software such as Flash/Director to identify quiz like aspects related to architecture features, as employed by the Reseau Art Nouveau but also to disasters such as the San Francisco earthquake. We will present how to program such a game.

The Cost-Optimal Distribution of Wind and Solar Generation Facilities in a Simplified Highly Renewable European Power System

NASA Astrophysics Data System (ADS)

Kies, Alexander; von Bremen, Lüder; Schyska, Bruno; Chattopadhyay, Kabitri; Lorenz, Elke; Heinemann, Detlev

2016-04-01

. "Investigation of balancing effects in long term renewable energy feed-in with respect to the transmission grid." Advances in Science and Research 12.1 (2015): 91-95, doi:10.5194/asr-12-91-2015 [2] Heide, Dominik, et al. "Reduced storage and balancing needs in a fully renewable European power system with excess wind and solar power generation." Renewable Energy 36.9 (2011): 2515-2523 [3] Rodriguez, R.A.: Weather-driven power transmission in a highly renewable European electricity network, PhD Thesis, Aarhus University, November 2014 [4] Pfluger, B. et al.: Tangible ways towards climate protection in the European Union (EU long-term scenarios 2050), Fraunhofer ISI, Karlsruhe, September 2011

Fixedwing UAV soundings of the boundary layer during the ScaleX 2015 summer campaign in southern Germany

NASA Astrophysics Data System (ADS)

Philipp, Andreas; Groos, Alexander; Petersen, Erik; Bischoff, Julian; Szogs, Sebastian; Beck, Christoph; Hähner, Jörg; Jacobeit, Jucundus

2016-04-01

In order to examine the potential to close the local water cycle budget and to evaluate models on different scales (among other aims) a fleet of 6 fixed wing UAVs has been operated by the Institute for Geography and the Institute for Informatics of the University of Augsburg during the ScaleX measurement campaign of the KIT/IMK-IFU (Karlsruher Institut für Technologie/Institut für Meteorologie und Klimatologie, Garmisch Partenkirchen). The site is located in southern Germany in a rural, hilly landscape at a small catchment tributing to the Ammersee and equipped with several ground based and remote sensing hydrological instruments. In order to complement these instruments by in situ measurements of the boundary layer, three intensive observation periods (IOPs) for taking temperature and humidity profiles took place, each with a different set up in order to evaluate optimal operation modes. The UAVs are all operated by the open hardware Apogee autopilot and sensor controller developed by ENAC (Ecole Nationale de l'Aviation Civile, Toulouse) operated by the PPRZ open source software package. The first IOP (30.06.-01.07.2015) was an experiment to cover a small site of 500 by 500 meters (well-apointed with hydrological instruments) in a 24 hours period as dense as possible. Thus three simultaneous helical profile flights (radius 70 m) have been run at each full hour around three different centres with heights ranging up to 1000 m above ground level (with special permissions). During a second IOP (15.07.2015) it has been tried to increase the frequence of profile flights up to 2 flights per hours between 7:30 and 14:00 CEST. These soundings have been accompanied by flyovers of a manned ultra light aircraft of the IMK-IFU. Finally a third experiment (06.08.2015) tried to evaluate longer flights (up to 55 minutes) of two UAVs at constant levels of 300 and 500 m above ground level between 6:00 and 14:00 CEST in order to cover the early diurnal cycle even more constantly

Concepts and Tests for the Remote-Controlled Dismantling of the Biological Shield and Form work of the KNK Reactor - 13425

DOE Office of Scientific and Technical Information (OSTI.GOV)

Neff, Sylvia; Graf, Anja; Petrick, Holger

The compact sodium-cooled nuclear reactor facility Karlsruhe (KNK), a prototype Fast Breeder, is currently in an advanced stage of dismantling. Complete dismantling is based on 10 partial licensing steps. In the frame of the 9. decommissioning permit, which is currently ongoing, the dismantling of the biological shield is foreseen. The biological shield consists of heavy reinforced concrete with built-in steel fitments, such as form-work of the reactor tank, pipe sleeves, ventilation channels, and measuring devices. Due to the activation of the inner part of the biological shield, dismantling has to be done remote-controlled. During a comprehensive basic design phase amore » practical dismantling strategy was developed. Necessary equipment and tools were defined. Preliminary tests revealed that hot wire plasma cutting is the most favorable cutting technology due to the geometrical boundary conditions, the varying distance between cutter and material, and the heavy concrete behind the steel form-work. The cutting devices will be operated remotely via a carrier system with an industrial manipulator. The carrier system has expandable claws to adjust to the varying diameter of the reactor shaft during dismantling progress. For design approval of this prototype development, interaction between manipulator and hot wire plasma cutting was tested in a real configuration. For the demolition of the concrete structure, an excavator with appropriate tools, such as a hydraulic hammer, was selected. Other mechanical cutting devices, such as a grinder or rope saw, were eliminated because of concrete containing steel spheres added to increase the shielding factor of the heavy concrete. Dismantling of the biological shield will be done in a ring-wise manner due to static reasons. During the demolition process, the excavator is positioned on its tripod in three concrete recesses made prior to the dismantling of the separate concrete rings. The excavator and the manipulator carrier

Gender issues in planning with water

NASA Astrophysics Data System (ADS)

Bostenaru-Dan, Maria; Olga Gociman, Cristina

2016-04-01

Numerous cities have (re)discovered their waterside landscapes as urban space and use their landscapal, urban, and architectural potentials to make a riverine city attractive. The fact that some cities only turn today to their rivers lays in the fact that in the past centuries it seemed wiser to build far from the river - it is the case of for example Karlsruhe and the Rhine - as from the river not only blessing, but also danger came. The proposed presentation aims in a first stage to investigate this ambivalence: in the meaning of the water itself. For this purpose views from science and the arts will be embedded. For the science stay insights from engineering hydrology. For the arts stay (urban) landscape planning up to museum planning, ex. a museum of water (incl. aquaria), debating both the content and the container. In a second step the discussion will focus even more on dealing with disasters. Building along the river is not only hazardous in what concerns flooding risk, but also for earthquake impact. Long distance earthquakes can have disastrous effects on high-density urban settlements, if alluvial soil deposits amplify the ground motion, in the case of cities built on river banks. Regarding natural hazards protection a different ambivalence can be identified. Providing safe housing leads to partly antagonic construction requirements in case of envisaging reducing flood and earthquake impact (for example presence or absence of basement spaces). For the purpose of opening discussion along these lines each an introduction on physical flood vulnerability and physical earthquake vulnerability will be made. In this paper a particular focus will be given to architecture at and with water by women. Women are a vulnerable social group when it comes to hazards, and have to be considered accordingly. Their perception of risk and their vulnerability are different. Also, the perception of women architecture varied particularly at pioneering times, and some of their

A catchment-scale groundwater model including sewer pipe leakage in an urban system

NASA Astrophysics Data System (ADS)

Peche, Aaron; Fuchs, Lothar; Spönemann, Peter; Graf, Thomas; Neuweiler, Insa

2016-04-01

-202. itwh (2002). Modellbeschreibung, Institut für technisch-wissenschaftliche Hydrologie GmbH, Hannover. Karpf, C. & Krebs, P. (2013). Modelling of groundwater infiltration into sewer systems. Urban Water Journal, 10:4, 221-229, DOI: 10.1080/1573062X.2012.724077. Kolditz, O., Bauer, S. et al. (2012). OpenGeoSys: an open source initiative for numerical simulation of thermo-hydro-mechanical/chemical (THM/C) processes in porous media. Env. Earth Sci. 67(2):589-599. Wolf, L., Held, I., Eiswirth, M., & Hötzl, H. (2004). Impact of leaky sewers on groundwater quality. Acta Hydrochimica et Hydrobiologica, 32(4-5), 361-373. doi:10.1002/aheh.200400538. Wolf, L. (2006). Influence of leaky sewer systems on groundwater resources beneath the city of Rastatt, Germany. Dissertation, University of Karlsruhe.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Piper, M; Lundquist, J K

Some recent investigations have begun to quantify turbulence and dissipation in frontal zones to address the question of what physical mechanism counteracts the intensification of temperature and velocity gradients across a developing front. Frank (1994) examines the turbulence structure of two fronts that passed a 200m instrumented tower near Karlsruhe, Germany. In addition to showing the mean vertical structure of the fronts as they pass the tower, Frank demonstrates that there is an order of magnitude or more increase in turbulent kinetic energy across the frontal zone. Blumen and Piper (1999) reported turbulence statistics, including dissipation rate measurements, from themore » MICROFRONTS field experiment, where high-frequency turbulence data were collected from tower-mounted hotwire and sonic anemometers in a cold front and in a density current. Chapman and Browning (2001) measured dissipation rate in a precipitating frontal zone with high-resolution Doppler radar. Their measurements were conducted above the surface layer, to heights of 5km. The dissipation rate values they found are comparable to those measured in Kennedy and Shapiro (1975) in an upper-level front. Here, we expand on these recent studies by depicting the behavior of the fine scales of turbulence near the surface in a frontal zone. The primary objective of this study is to quantify the levels of turbulence and dissipation occurring in a frontal zone through the calculation of kinetic energy spectra and dissipation rates. The high-resolution turbulence data used in this study are taken during the cold front that passed the MICROFRONTS site in the early evening hours of 20 March 1995. These new measurements can be used as a basis for parameterizing the effects of surface-layer turbulence in numerical models of frontogenesis. We present three techniques for calculating the dissipation rate: direct dissipation technique, inertial dissipation technique and Kolmogorov's four-fifths law

Composition Changes After the "Halloween" Solar Proton Event: The High-Energy Particle Precipitation in the Atmosphere (HEPPA) Model Versus MIPAS Data Intercomparison Study

NASA Technical Reports Server (NTRS)

Funke, B.; Baumgaertner, A.; Calisto, M.; Egorova, T.; Jackman, C. H.; Kieser, J.; Krivolutsky, A.; Lopez-Puertas, M.; Marsh. D. R.; Reddmann, T.;

Analysis of the seismic wavefield in the Moesian Platform (Bucharest area) for hazard assessment purposes

NASA Astrophysics Data System (ADS)

Manea, Elena Florinela; Michel, Clotaire; Hobiger, Manuel; Fäh, Donat; Cioflan, Carmen Ortanza; Radulian, Mircea

2017-09-01

During large earthquakes generated at intermediate depth in the Vrancea seismic zone, the ground motion recorded in Bucharest (Romania) is characterized by predominant long periods with strong amplification. Time-frequency analysis highlights the generation of low frequency surface waves (<1 Hz) for sufficiently strong and superficial events. This phenomenon has been explained by the influence of both source mechanism (radiation pattern, directivity effects) and mechanical properties of the local geological structure (geological layering and geometry). The main goal of our study is to better characterize and understand the seismic wavefield produced by earthquakes in the area of Bucharest, taking into account its location in the centre of the Moesian Platform, a large sedimentary basin (450 km long, 300 km wide and up to 20 km deep). To this aim, we identify the contribution of different seismic surface waves, such as the ones produced at the edges of this large sedimentary basin or multipath interference waves (Airy phases of Love and Rayleigh waves), on ground motion. The data from a 35 km diameter array (URS experiment) were used. The array was installed by the National Institute for Earth Physics in cooperation with the Karlsruhe Institute for Technology and operated during 10 months in 2003 and 2004 in the urban area of Bucharest and adjacent zones. The earthquake wavefield recorded by the URS array was analysed using the MUSIQUE technique. This technique analyses the three-component signals of all sensors of a seismic array together. The analysis includes 19 earthquakes with epicentral distances from 100 to 1560 km and with various backazimuths with enough energy at low frequencies (0.1-1 Hz), within the resolution range of the array. For all events, the largest portion of energy is arriving from the source direction and the wavefield is dominated by Love waves. The results of the array analyses clearly indicate a significant scattering corresponding to 2-D

[Effectiveness of low emission zones of stage 1: analysis of the changes in fine dust concentrations (PM10) in 19 German cities].

PubMed

Morfeld, P; Groneberg, D A; Spallek, M

2014-03-01

It is not known/is disputed whether introduction of low emission zones (LEZs) leads to a reduction of fine dust pollutants. Data on PM10 concentrations obtained from measurement stations within and outside of LEZs from 19 German cities (Augsburg, Berlin, Dortmund, Duisburg, Düsseldorf, Essen, Frankfurt a. M., Hannover, Herrenberg, Ilsfeld, Karlsruhe, Köln, Ludwigsburg, Mannheim, München, Reutlingen, Stuttgart, Tübingen, Wuppertal) were analyzed in order to investigate the effect of banning vehicles ("tier 1") of the pollutant group 1 (without stickers) on the pollutant concentration, i.e, this study focused on LEZs that restricted cars of EURO 1 standard without appropriate retrofitting systems from entering these zones. For the period from about 2005 until the end of 2009, data from continuous half-hour measurements as well as gravimetrically determined daily measurements of PM10 were collected. The analysis consisted of four pairwise corresponding measurement values as matched quadruples of two index and two reference values (index stations are inside, and reference stations are outside the LEZs). One index value and the simultaneous reference value were measured during the active LEZ period, and the other pair of values was measured before the LEZ was introduced. The pairs of values had a difference in time of 364 days or a multiple of 364 days keeping the season, weekday and time of day constant within the quadruple. Differences in index values were regressed on differences in reference values while meteorological parameters (height of the inversion base, amount of precipitation, wind velocity), school holidays, period of environmental bonus paid, periods when trucks were banned as well as baseline data at index and reference stations were taken into account as covariates in so-called "fixed effects" regression analyses of the quadruples (difference score method in the two-period case). The statistical approach was successfully validated prior to this

Pan-European stochastic flood event set

NASA Astrophysics Data System (ADS)

Kadlec, Martin; Pinto, Joaquim G.; He, Yi; Punčochář, Petr; Kelemen, Fanni D.; Manful, Desmond; Palán, Ladislav

2017-04-01

Impact Forecasting (IF), the model development center of Aon Benfield, has been developing a large suite of catastrophe flood models on probabilistic bases for individual countries in Europe. Such natural catastrophes do not follow national boundaries: for example, the major flood in 2016 was responsible for the Europe's largest insured loss of USD3.4bn and affected Germany, France, Belgium, Austria and parts of several other countries. Reflecting such needs, IF initiated a pan-European flood event set development which combines cross-country exposures with country based loss distributions to provide more insightful data to re/insurers. Because the observed discharge data are not available across the whole Europe in sufficient quantity and quality to permit a detailed loss evaluation purposes, a top-down approach was chosen. This approach is based on simulating precipitation from a GCM/RCM model chain followed by a calculation of discharges using rainfall-runoff modelling. IF set up this project in a close collaboration with Karlsruhe Institute of Technology (KIT) regarding the precipitation estimates and with University of East Anglia (UEA) in terms of the rainfall-runoff modelling. KIT's main objective is to provide high resolution daily historical and stochastic time series of key meteorological variables. A purely dynamical downscaling approach with the regional climate model COSMO-CLM (CCLM) is used to generate the historical time series, using re-analysis data as boundary conditions. The resulting time series are validated against the gridded observational dataset E-OBS, and different bias-correction methods are employed. The generation of the stochastic time series requires transfer functions between large-scale atmospheric variables and regional temperature and precipitation fields. These transfer functions are developed for the historical time series using reanalysis data as predictors and bias-corrected CCLM simulated precipitation and temperature as

Influence of particle aspect ratio on the midinfrared extinction spectra of wavelength-sized ice crystals.

PubMed

Wagner, Robert; Benz, Stefan; Möhler, Ottmar; Saathoff, Harald; Schnaiter, Martin; Leisner, Thomas

2007-12-20

We have used the T-matrix method and the discrete dipole approximation to compute the midinfrared extinction cross-sections (4500-800 cm(-1)) of randomly oriented circular ice cylinders for aspect ratios extending up to 10 for oblate and down to 1/6 for prolate particle shapes. Equal-volume sphere diameters ranged from 0.1 to 10 microm for both particle classes. A high degree of particle asphericity provokes a strong distortion of the spectral habitus compared to the extinction spectrum of compactly shaped ice crystals with an aspect ratio around 1. The magnitude and the sign (increase or diminution) of the shape-related changes in both the absorption and the scattering cross-sections crucially depend on the particle size and the values for the real and imaginary part of the complex refractive index. When increasing the particle asphericity for a given equal-volume sphere diameter, the values for the overall extinction cross-sections may change in opposite directions for different parts of the spectrum. We have applied our calculations to the analysis of recent expansion cooling experiments on the formation of cirrus clouds, performed in the large coolable aerosol and cloud chamber AIDA of Forschungszentrum Karlsruhe at a temperature of 210 K. Depending on the nature of the seed particles and the temperature and relative humidity characteristics during the expansion, ice crystals of various shapes and aspect ratios could be produced. For a particular expansion experiment, using Illite mineral dust particles coated with a layer of secondary organic matter as seed aerosol, we have clearly detected the spectral signatures characteristic of strongly aspherical ice crystal habits in the recorded infrared extinction spectra. We demonstrate that the number size distributions and total number concentrations of the ice particles that were generated in this expansion run can only be accurately derived from the recorded infrared spectra when employing aspect ratios as high as

PREFACE: 15th International Conference on Strangeness in Quark Matter (SQM2015)

NASA Astrophysics Data System (ADS)

Alvarez-Castillo, D.; Blaschke, D.; Kekelidze, V.; Matveev, V.; Sorin, A.

2016-01-01

acknowledge support from the JINR Dubna, the Russian Foundation for Basic Research, the Bundesministerium für Bildung und Forschung via the Heisenberg-Landau program, the Ministerstwo Nauki i Szkolnistwa Wyższego via the Bogoliubov-Infeld program, the LOEWE program via HIC for FAIR, the Helmholtz Association with their centres DESY, FZ Jülich, GSI Darmstadt, HZ Dresden-Rossendorf, Karlsruhe Institute of Technology and the Helmholtz Institutes in Mainz and Jena via the HISS programme. We thank the IAC for their help and advice in planning the conference, and we are grateful to the members of the Local Organisation Committee for their help in during the conference as well as to Niels-Uwe Bastian, Alexandra Friesen, Mark Alexander Kaltenborn and Irina Pirozhenko for their assistance in preparing these Proceedings.

Evaluation of Harvard Lyman-α Hygrometer and Harvard Herriott Hygrometer measurements from the SEAC4RS flight campaign and AquaVIT2 laboratory comparison

NASA Astrophysics Data System (ADS)

Sargent, M. R.; Smith, J. B.; Wilmouth, D. M.; Sayres, D. S.; Anderson, J. G.

2013-12-01

and Instrument Tests (AquaVIT-2), during April 2013 at the Aerosols Interaction and Dynamics in the Atmosphere (AIDA) chamber in Karlsruhe, Germany, and 2) NASA's Studies of Emissions, Atmospheric Composition, Clouds and Climate Coupling by Regional Surveys (SEAC4RS) mission, operated out of Houston, TX, in August and September of 2013. The Aquavit-2 campaign provided an excellent opportunity to evaluate both axes of the HWV instrument under a controlled laboratory setting, and to compare with other state-of-the-art hygrometers within the international community, many of which have contributed substantially to UT/LS water vapor measurements for several decades. Laboratory efforts, however, are limited by their ability to replicate the unique sampling conditions, e.g., temperature, pressure, flow, chemistry, of the flight environment. Differences in instrument implementation between the laboratory and flight environment must also be considered. The SEAC4RS mission provides an excellent opportunity to further evaluate the performance of the dual-axis instrument in situ. Sampling with the Ly-α and HHH instruments on the ER-2 in the proximity of Microwave Limb Sounder (MLS) overpasses and coordinated launches of the Cryogenic Frostpoint Hygrometer (CFH) promises a statistically significant and rich dataset for comparison.

Source apportionment and air quality impact assessment studies in Beijing/China

NASA Astrophysics Data System (ADS)

Suppan, P.; Schrader, S.; Shen, R.; Ling, H.; Schäfer, K.; Norra, S.; Vogel, B.; Wang, Y.

2012-04-01

More than 15 million people in the greater area of Beijing are still suffering from severe air pollution levels caused by sources within the city itself but also from external impacts like severe dust storms and long range advection from the southern and central part of China. Within this context particulate matter (PM) is the major air pollutant in the greater area of Beijing (Garland et al., 2009). PM did not serve only as lead substance for air quality levels and therefore for adverse health impact effects but also for a strong influence on the climate system by changing e.g. the radiative balance. Investigations on emission reductions during the Olympic Summer Games in 2008 have caused a strong reduction on coarser particles (PM10) but not on smaller particles (PM2.5). In order to discriminate the composition of the particulate matter levels, the different behavior of coarser and smaller particles investigations on source attribution, particle characteristics and external impacts on the PM levels of the city of Beijing by measurements and modeling are performed: Examples of long term measurements of PM2.5 filter sampling in 2005 with the objectives of detailed chemical (source attribution, carbon fraction, organic speciation and inorganic composition) and isotopic analyses as well as toxicological assessment in cooperation with several institutions (Karlsruhe Institute of Technology (IfGG/IMG), Helmholtz Zentrum München (HMGU), University Rostock (UR), Chinese University of Mining and Technology Beijing, CUMTB) will be discussed. Further experimental studies include the operation of remote sensing systems to determine continuously the MLH (by a ceilometer) and gaseous air pollutants near the ground (by DOAS systems) as well as at the 320 m measurement tower (adhesive plates at different heights for passive particle collection) in cooperation with the Institute of Atmospheric Physics (IAP) of the Chinese Academy of Sciences (CAS). The influence of the MLH on

Improving the shear wave velocity structure beneath Bucharest (Romania) using ambient vibrations

NASA Astrophysics Data System (ADS)

Manea, Elena Florinela; Michel, Clotaire; Poggi, Valerio; Fäh, Donat; Radulian, Mircea; Balan, Florin Stefan

2016-11-01

Large earthquakes from the intermediate-depth Vrancea seismic zone are known to produce in Bucharest ground motion characterized by predominant long periods. This phenomenon has been interpreted as the combined effect of both seismic source properties and site response of the large sedimentary basin. The thickness of the unconsolidated Quaternary deposits beneath the city is more than 200 m, the total depth of sediments is more than 1000 m. Complex basin geometry and the low seismic wave velocities of the sediments are primarily responsible for the large amplification and long duration experienced during earthquakes. For a better understanding of the geological structure under Bucharest, a number of investigations using non-invasive methods have been carried out. With the goal to analyse and extract the polarization and dispersion characteristics of the surface waves, ambient vibrations and low-magnitude earthquakes have been investigated using single station and array techniques. Love and Rayleigh dispersion curves (including higher modes), Rayleigh waves ellipticity and SH-wave fundamental frequency of resonance (f0SH) have been inverted simultaneously to estimate the shear wave velocity structure under Bucharest down to a depth of about 8 km. Information from existing borehole logs was used as prior to reduce the non-uniqueness of the inversion and to constrain the shallow part of the velocity model (<300 m). In this study, we use data from a 35-km diameter array (the URS experiment) installed by the National Institute for Earth Physics and by the Karlsruhe Institute of Technology during 10 months in the period 2003-2004. The array consisted of 32 three-component seismological stations, deployed in the urban area of Bucharest and adjacent zones. The large size of the array and the broad-band nature of the available sensors gave us the possibility to characterize the surface wave dispersion at very low frequencies (0.05-1 Hz) using frequency-wavenumber techniques

Teaching earth science in the field: GPS-based educational trails as a practically relevant, empirical verified approach

NASA Astrophysics Data System (ADS)

Kisser, Thomas

2015-04-01

GPS devices are common use in the daily life and are used in geography classes increasingly often. Presently, specialist literature is merely descriptive and thematically reduced to the function of orientation. The questions whether they are an applicable tool for teaching earth science circumstances and if the lasting learning success shows any differences compared to normal lessons hold in a class room haven't been answered. Neurobiological and teaching psychological knowledge support the idea that students completing the GPS-based educational trail will learn more successful compared to students in a "normal" class: A successful contextualization of modern geomedia stimulates the motivation. Geocaches are also suitable for didactical structuration. The order of "Geopoints" is chosen in a way that the structure of the landscape is being displayed adequate. The students feel addressed affectively due to the real-life encounters and experience their environment consciously. The presented concept "GPS-based educational trail" is different from a normal geocache, which is merely a hide-and-seek-game. Here, the main focus lays on the field work and earth science. The GPS-decvices are used for the orientation between the Geopoints. In order to get two groups with characteristics as different as possible, due to their developmental psychology, age-related education of cognitive and methodical competence, classes from grade 5 (11 years old) and 11 (17 years old) have been chosen. The different cognitive states of development require different didactical approaches. For the 11 grade the topic "rearrangements of fluvial topography" is a possible one. Using the example of anthropogenic rearrangements of the Rheinaue wetlands near Karlsruhe the interdependency between human and environment can be shown. The "Nördlinger Ries" between the Swabian and the Franconian Jura has been chosen for grade 5. The typical elements of the Swabian Jura (karst formation, hydrogeology

Preliminary Interpretation of a Radionuclide and Colloid Tracer Test in a Granodiorite Shear Zone at the Grimsel Test Site, Switzerland

DOE Office of Scientific and Technical Information (OSTI.GOV)

Reimus, Paul W.

2012-08-30

In February and March 2012, a tracer test involving the injection of a radionuclide-colloid cocktail was conducted in the MI shear zone at the Grimsel Test Site, Switzerland, as part of the Colloids Formation and Migration (CFM) project. The colloids were derived from FEBEX bentonite, which is mined in Spain and is being considered as a potential waste package backfill in a Spanish nuclear waste repository. The tracer test, designated test 12-02 (second test in 2012), involved the injection of the tracer cocktail into borehole CFM 06.002i2 and extraction from the Pinkel surface packer at the main access tunnel wallmore » approximately 6.1 m from the injection interval. The test configuration is depicted in Figure 1. This configuration has been used in several conservative tracer tests and two colloid-homologue tracer tests since 2007, and it is will be employed in an upcoming test involving the emplacement of a radionuclide-doped bentonite plug into CFM 06.002i2 to evaluate the swelling and erosion of the bentonite and the transport of bentonite colloids and radionuclides from the source to the extraction point at the tunnel wall. Interpretive analyses of several of the previous tracer tests, from 09-01 through 12-02 were provided in two previous Used Fuel Disposition Program milestone reports (Arnold et al., 2011; Kersting et al., 2012). However, only the data for the conservative tracer Amino-G Acid was previously analyzed from test 12-02 because the other tracer data from this test were not available at the time. This report documents the first attempt to quantitatively analyze the radionuclide and colloid breakthrough curves from CFM test 12-02. This report was originally intended to also include an experimental assessment of colloid-facilitated transport of uranium by bentonite colloids in the Grimsel system, but this assessment was not conducted because it was reported by German collaborators at the Karlsruhe Institute of Technology (KIT) that neither

Full waveform approach for the automatic detection and location of acoustic emissions from hydraulic fracturing at Äspö (Sweden)

NASA Astrophysics Data System (ADS)

Ángel López Comino, José; Cesca, Simone; Heimann, Sebastian; Grigoli, Francesco; Milkereit, Claus; Dahm, Torsten; Zang, Arno

2017-04-01

seismic event. The relative location accuracy is improved using a master event approach to correct for travel time perturbations. The master event is selected based on a good signal to noise ratio leading to a robust location with small uncertainties. Relative magnitudes are finally estimated upon the decay of the maximal recorded amplitude from the AE location. The resulting catalogue is composed of more than 4000 AEs. Their hypocenters are spatially clustered in a planar region, resembling the main fracture plane; its orientation and size are estimated from the spatial distribution of AEs. This work is funded by the EU H2020 SHEER project. Nova project 54-14-1 was financially supported by the GFZ German Research Center for Geosciences (75%), the KIT Karlsruhe Institute of Technology (15%) and the Nova Center for University Studies, Research and Development (10%). An additional in-kind contribution of SKB for using Äspö Hard Rock Laboratory as test site for geothermal research is greatly acknowledged.

Committees and organizers

NASA Astrophysics Data System (ADS)

2011-07-01

(Orsay) S Hamann (Bochum)R Varga (Košice) U Hannemann (Dresden)P Vavassori (San Sebastian) L Havela (Prague)W Wulfhekel (Karlsruhe) O Heczko (Prague)M Yamashita (Sendai) B Hernando (Oviedo)R Zdyb (Lublin) O Isnard (Grenoble)A Zhukov (San Sebastián) Z Kąkol (Kraków)A K Zvezdin (Moscow) N-T H Kim-Ngan (Kraków) International Advisory Committee (2011): Dominique Givord, President (Grenoble)Ludwig Schultz, Former President (Dresden) Manfred Albrecht (Chemnitz)Burkard Hillebrands (Kaiserslautern) Agnés Barthélémy (Paris)Andrei Kirilyuk (Nijmegen) Roy Chantrell (York)Ron Jansen (Tsukuba) Russell Cowburn (London)Nicoleta Lupu (Iasi) Tomasz Dietl (Warszawa)Caroline A Ross (Cambridge, MA) Claudia Felser (Mainz)Stefano Sanvito (Dublin) Josef Fidler (Wien)Vladimir Sechovsky (Praha) Dino Fiorani (Roma)Roberta Sessoli (Firenze) Pietro Gambardella (Bellaterra)Jozef Spałek (Kraków) Alberto Guimarães (Rio de Janeiro)

241Am (n,gamma) isomer ratio measurement

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bond, Evelyn M; Vieira, David J; Moody, Walter A

The objective of this project is to improve the accuracy of the {sup 242}Cm/{sup 241}Am radiochemistry ratio. We have performed an activation experiment to measure the {sup 241}Am(n,{gamma}) cross section leading to either the ground state of {sup 242g}Am (t{sub 1/2} = 16 hr) which decays to {sup 242}Cm (t{sub 1/2} = 163 d) or the long-lived isomer {sup 242m}Am (t{sub 1/2} = 141 yr). This experiment will develop a new set of americium cross section evaluations that can be used with a measured {sup 242}Cm/{sup 241}Am radiochemical measurement for nuclear forensic purposes. This measurement is necessary to interpret themore » {sup 242}Cm/{sup 241}Am ratio because a good measurement of this neutron capture isomer ratio for {sup 241}Am does not exist. The targets were prepared in 2007 from {sup 241}Am purified from LANL stocks. Gold was added to the purified {sup 241}Am as an internal neutron fluence monitor. These targets were placed into a holder, packaged, and shipped to Forschungszentrum Karlsruhe, where they were irradiated at their Van de Graff facility in February 2008. One target was irradiated with {approx}25 keV quasimonoenergetic neutrons produced by the {sup 7}Li(p,n) reaction for 3 days and a second target was also irradiated for 3 days with {approx}500 keV neutrons. Because it will be necessary to separate the {sup 242}Cm from the {sup 241}Am in order to measure the amount of {sup 242}Cm by alpha spectrometry, research into methods for americium/curium separations were conducted concurrently. We found that anion exchange chromatography in methanol/nitric acid solutions produced good separations that could be completed in one day resulting in a sample with no residue. The samples were returned from Germany in July 2009 and were counted by gamma spectrometry. Chemical separations have commenced on the blank sample. Each sample will be spiked with {sup 244}Cm, dissolved and digested in nitric acid solutions. One third of each sample will be processed at a

Regional climate service in Southern Germany

NASA Astrophysics Data System (ADS)

Schipper, Janus; Hackenbruch, Julia

2013-04-01

Climate change challenges science, politics, business and society at the international, national and regional level. The South German Climate Office at the Karlsruhe Institute of Technology (KIT) is a contact for the structuring and dissemination of information on climate and climate change in the South German region. It provides scientifically based and user-oriented climate information. Thereby it builds a bridge between the climate sciences and society and provides scientific information on climate change in an understandable way. The expertise of KIT, in which several institutions operate on fundamental and applied climate research, and of partner institutions is the basis for the work in the climate office. The regional focus is on the south of Germany. Thematic focuses are e.g. regional climate modeling, trends in extreme weather events such as heavy rain and hail event, and issues for energy and water management. The South German Climate Office is one of four Regional Helmholtz Climate Offices, of which each has a regional and thematic focus. The users of the Climate Office can be summarized into three categories. First, there is the general public. This category consists mainly of non-professionals. Here, special attention is on an understandable translation of climate information. Attention is paid to application-related aspects, because each individual is affected in a different way by climate change. Typical examples of this category are school groups, citizens and the media. The second category consists of experts of other disciplines. Unlike the first category they are mainly interested in the exchange of results and data. It is important to the climate office to provide support for the use of climatological results. Typical representatives of this category are ministries, state offices, and companies. In the third and final category are scientists. In addition to the climatologists, this category also holds representatives from other scientific

PREFACE: International Conference on Superconductivity and Magnetism-ICSM2008

NASA Astrophysics Data System (ADS)

Gencer, Ali; Grasso, Gianni

2009-03-01

Karlsruhe C E Gough Birmingham University R Huebener Tubingen University K Kadowaki NIMS, Tsukuba University M A R LaBlanch UO, CA E Inger Boren E Ozdas Hacettepe University H Ozkan METU, Ankara R Penko ASG V Vlasov Argonne National Laboratory Scientific Programme Committee E H Brandt Max-Planck-Institute, Stuttgart W Goldacker FZ Karlsruhe C Ferdeghini CNR INFM, Genova D M Hampshire Durham University Y Oner ITU, Instanbul B Aktas GYTE, Gebze B Ramaev GYTE, Gebze E Ozdas Hacettepe University—Coordinator M A Aksan Inonu University—Abstract Handling Local Organizing Committee S Safran Ankara University—General Secretary E Ertekin Ankara University—Registrar A Kilic Nigde University U Kolemen G O Pasa University K Guven Kirikkale University—Transport and Accommodation B Ozkurt Mersin University Ö Çiçek Renko D Bumin Boren S Altin Inonu University O Nane Çukurova University Editorial Board for Proceedings A Gencer Ankara University—Guest Editor G Grasso Columbus Superconductors SpA, Genova—Guest Editor B Aktas GYTE, Gebze I Belenli Hakkari University M A Aksan Inonu University—Scientific Secretary M I J Probert York University M E Yakinci Inonu University A Bozbey TOBB, University of Economics and Technology Finance Director S Kervan Nevsehir University Bursary Coordinator H Agil Ankara University

PREFACE: The International Conference on Superconductivity and Magnetism (ICSM2008) (Side, Turkey, 25-29 August 2008) The International Conference on Superconductivity and Magnetism (ICSM2008) (Side, Turkey, 25-29 August 2008)

NASA Astrophysics Data System (ADS)

Gencer, Ali; Grasso, Gianni

2009-03-01

generous contributions from Turkish research institutions, and an Italian firm, Columbus Superconductors SpA. The list of contributors is as follows: TÜBİTAK Boren Columbus Superconductors Ankara University Research Fund. The following small research companies also contributed: Boronsan IMTEK Zeiss Nanomagnetics Optomek Side Municipality Belek Municipality. It is a pleasure to thank them all for their pivotal role in the organization of the conference. We would also like to thank the speakers, the participants, the exhibitors and the Ankara University staff and students for their efforts which made ICSM2008 a very successful meeting. The list of people involved in the organization is given below. More information about the conference can be found at http://www.icsm2008side.org. It is due to the immense demand from most of the attendees that we are planning to organize the second International Conference on Superconductivity and Magnetism (ICSM2010) for April 2010, in Antalya. Further details will be made clear and circulated soon. We will be very happy to host the next conference and look forward to welcoming you again. Conference Director A Gencer Ankara University Conference Co-directors B Aktas GYTE, Gebze M E Yakinci Inonu University Scientific Committee D Abukay IYTE, İzmir M Altunbas KTU, Trabzon I Askerzade Ankara University I Belenli AIBU, Bolu G Grasso Columbus Superconductors SpA, Genova N Guclu G O Pasa University K Kiymac Çukurova University S Nezir Kirikkale University A Oral Sabanci University B Ozcelik Çukurova University Y Oner IYTE, İzmir L Ozyuzer IYTE, İzmir O Uzun G O Pasa University E Yanmaz KTU, Trabzon—Coordinator C Terzioglu AIBU, Bolu International Advisory Board M Tachiki Tokyo University E Aksu TAEK H Akalin Renko O Atiker Boronsan R Cubitt Institut Laue-Langevin, Grenoble G Crabtree Argonne National Laboratory A Elmali Ankara University C Ferdeghini CNR INFM, Genova R Flukiger Genova University W Goldacker FZ Karlsruhe C E Gough

COST Action TU1208 - Working Group 1 - Design and realisation of Ground Penetrating Radar equipment for civil engineering applications

NASA Astrophysics Data System (ADS)

Pajewski, Lara; Benedetto, Andrea; D'Amico, Sebastiano; Ferrara, Vincenzo; Frezza, Fabrizio; Persico, Raffaele; Tosti, Fabio

2017-04-01

challenging environmental situations, description of risks associated to specific applications, instructions for first medical aid, information about GPR electromagnetic emissions and associated risks, and finally suggestions for a safe use of the equipment and for a respectful interaction with the environment. 7. WG1 contributed to the TU1208 Education Pack, an open-access educational package conceived to teach GPR in University courses. 8. Three Training Schools were organised on radar systems and antennas, in cooperation with the European School of Antennas (ESoA): two editions of the Training School "Future Radar Systems: Radar2020" and a Training School on "UWB Antennas, Technologies and Applications". These courses were held in the Karlsruhe Institute of Technology, in Karlsruhe, Germany. Acknowledgement: The Authors are deeply grateful to COST (European Cooperation in Science and Technology, www.cost.eu), for funding and supporting the COST Action TU1208 "Civil engineering applications of Ground Penetrating Radar" (www.GPRadar.eu).

EDITORIAL: Strongly correlated electron systems Strongly correlated electron systems

NASA Astrophysics Data System (ADS)

Ronning, Filip; Batista, Cristian

2011-03-01

Strongly correlated electrons is an exciting and diverse field in condensed matter physics. This special issue aims to capture some of that excitement and recent developments in the field. Given that this issue was inspired by the 2010 International Conference on Strongly Correlated Electron Systems (SCES 2010), we briefly give some history in order to place this issue in context. The 2010 International Conference on Strongly Correlated Electron Systems was held in Santa Fe, New Mexico, a reunion of sorts from the 1989 International Conference on the Physics of Highly Correlated Electron Systems that also convened in Santa Fe. SCES 2010—co-chaired by John Sarrao and Joe Thompson—followed the tradition of earlier conferences, in this century, hosted by Buzios (2008), Houston (2007), Vienna (2005), Karlsruhe (2004), Krakow (2002) and Ann Arbor (2001). Every three years since 1997, SCES has joined the International Conference on Magnetism (ICM), held in Recife (2000), Rome (2003), Kyoto (2006) and Karlsruhe (2009). Like its predecessors, SCES 2010 topics included strongly correlated f- and d-electron systems, heavy-fermion behaviors, quantum-phase transitions, non-Fermi liquid phenomena, unconventional superconductivity, and emergent states that arise from electronic correlations. Recent developments from studies of quantum magnetism and cold atoms complemented the traditional subjects and were included in SCES 2010. 2010 celebrated the 400th anniversary of Santa Fe as well as the birth of astronomy. So what's the connection to SCES? The Dutch invention of the first practical telescope and its use by Galileo in 1610 and subsequent years overturned dogma that the sun revolved about the earth. This revolutionary, and at the time heretical, conclusion required innovative combinations of new instrumentation, observation and mathematics. These same combinations are just as important 400 years later and are the foundation of scientific discoveries that were discussed

Execution of excursions: The development of educational trails with(out) Geocaching - a comparison

NASA Astrophysics Data System (ADS)

Kisser, Thomas

2014-05-01

basic of educational trails, to work further with the gained knowledge and to use it for transfer. In order to get two groups with characteristics as different as possible, due to their developmental psychology, age-related education of cognitive and methodical competence, classes from grade 5 (11 years old) and 11 (17 years old) have been chosen. The different cognitive states of development require different didactical approaches. For the 11 grade the topic "Umgestaltung von Flusslandschaften" (rearrangements of fluvial topography) is a possible one. Using the example of anthropogenic rearrangements of the Rheinaue wetlands near Karlsruhe the interdependency between human and environment can be shown. The "Nördlinger Ries" between the Swabian and the Franconian Jura has been chosen for grade 5. The typical elements of the Swabian Jura (karst formation, hydrogeology, typical vegetation) are provided just as well as the impressive special form of the impact tectonics. The sustainability of educational trails using GPS is evaluated by the learning effect of the 441 probands. The sustainability of trails is evaluated through an anonym, unheralded test in both grades, which prompt the cognitive competence. The learning effect of the educational trail groups is compared to groups that completed the particular topics in a carousel activity.

In situ soil moisture and matrix potential - what do we measure?

NASA Astrophysics Data System (ADS)

Jackisch, Conrad; Durner, Wolfgang

2017-04-01

poses quite some concern about deriving field parameters from lab measurements. We will present some insights from the comparison study and highlight the conceptual concerns arising from it. Through this we hope to stimulate a discussion towards more critical revision of measurement assumptions and towards the development of alternative techniques to monitor subsurface states. The sensor comparison study consortium is a cooperation of Wolfgang Durner2, Ines Andrä2, Kai Germer2, Katrin Schulz2, Marcus Schiedung2, Jaqueline Haller-Jans2, Jonas Schneider2, Julia Jaquemotte2, Philipp Helmer2, Leander Lotz2, Thomas Graeff3, Andreas Bauer3, Irene Hahn3, Conrad Jackisch1, Martin Sanda4, Monika Kumpan5, Johann Dorner5, Gerrit de Rooij6, Stephan Wessel-Bothe7, Lorenz Kottmann8, and Siegfried Schittenhelm8. The great support by the team and the Thünen Institute Braunschweig is gratefully acknowledged. 1 Karlsruhe Institute of Technology, 2 Technical University of Braunschweig, 3 University of Potsdam, 4 Technical University of Prague, 5 Federal Department for Water Management Petzenkirchen, 6 Helmholtz Centre for Environmental Research Halle, 7 ecoTech GmbH Bonn, 8 Julius Kühn Institute Braunschweig

Radar sensing via a Micro-UAV-borne system

NASA Astrophysics Data System (ADS)

Catapano, Ilaria; Ludeno, Giovanni; Gennarelli, Gianluca; Soldovieri, Francesco; Rodi Vetrella, Amedeo; Fasano, Giancarmine

2017-04-01

-equipped drone. The system is made by a commercial radar system, whose mass, size, power and cost budgets is compatible with the installation on micro-UAV. The radar system has been mounted on a DJI 550 UAV, a flexible hexacopter allowing both complex flight operations and static flight, and has been equipped with small size log-periodic antennas, having a 6 dB gain over the frequency range from 2 GHz to 11 GHz. An ad-hoc signal processing chain has been adopted to process the collected raw data and obtain an image of the investigated scenario providing an accurate target detection and localization. This chain involves a SVD-based noise filter procedure and an advanced data processing approach, which assumes a linear model of the underlying scattering phenomenon. REFERENCES [1] K. Whitehead, C. H. Hugenholtz, "Remote sensing of the environment with small unmanned aircraft systems (UASs), part 1: a review of progress and challenges", J. Unmanned Vehicle Systems, vol.2, pp. 69-85, 2014. [2] K. Ouchi, Recent trend and advance of synthetic aperture radar with selected topics, Remote Sens, vol.5, pp.716-807, 2013. [3] D. Altdor et al., UAV-borne electromagnetic induction and ground-penetrating radar measurements: a feasibility test, 74th Annual Meeting of the Deutsche Geophysikalische Gesellschaft in Karlsruhe, Germany, March 9 - 13, 2014.

A new cavity ring-down instrument for airborne monitoring of N2O5, NO3, NO2 and O3 in the upper troposphere lower stratosphere

NASA Astrophysics Data System (ADS)

Ruth, Albert A.; Brown, Steven S.; Dinesan, Hemanth; Dubé, William P.; Goulette, Marc; Hübler, Gerhard; Orphal, Johannes; Zahn, Andreas

2016-04-01

The chemistry of NO3 and N2O5 is important to the regulation of both tropospheric and stratospheric ozone. In situ detection of NO3 and N2O5 in the upper troposphere lower stratosphere (UTLS) represents a new scientific direction as the only previous measurements of these species in this region of the atmosphere has been via remote sensing techniques. Because both the sources and the sinks for NO3 and N2O5 are potentially stratified spatially, their mixing ratios, and their influence on nitrogen oxide and ozone transport and loss at night can show large variability as a function of altitude. Aircraft-based measurements of heterogeneous N2O5 uptake in the lower troposphere have uncovered a surprising degree of variability in the uptake coefficient [1], but there are no corresponding high altitude measurements.The UTLS is routinely sampled by the IAGOS-CARIBIC program (Civil Aircraft for the Regular Investigation of the atmosphere Based on an Instrument Container, www.caribic-atmospheric.com), a European infrastructural program with the aim of studying the chemistry and transport across this part of the atmosphere. An airfreight container with 15 different automated instruments from 8 European research partners is utilized on board a commercial Lufthansa airbus 340-600 to monitor ~ 100 atmospheric species (trace gases and aerosol parameters) in the UTLS. The instrumentation in the CARIBIC container is now to be supplemented by a new cavity ring-down device for monitoring nitrogen oxides, jointly developed by researchers from Cork (Ireland), Boulder (USA) and Karlsruhe (Germany). The compact and light-weight instrument is designed to monitor not only NO3 and N2O5, but also NO2 and O3. The detection is based on 4 high-finesse optical cavities (cavity length ~ 44 cm). Two cavities are operated at 662 nm (maximum absorption of NO3), the other two at 405 nm (maximum absorption of NO2). The inlet to one of the (662)-cavities is heated in order to thermally decompose N2O5

α-Pinene secondary organic aerosol at low temperature: chemical composition and implications for particle viscosity

NASA Astrophysics Data System (ADS)

Huang, Wei; Saathoff, Harald; Pajunoja, Aki; Shen, Xiaoli; Naumann, Karl-Heinz; Wagner, Robert; Virtanen, Annele; Leisner, Thomas; Mohr, Claudia

2018-02-01

Chemical composition, size distributions, and degree of oligomerization of secondary organic aerosol (SOA) from α-pinene (C10H16) ozonolysis were investigated for low-temperature conditions (223 K). Two types of experiments were performed using two simulation chambers at the Karlsruhe Institute of Technology: the Aerosol Preparation and Characterization (APC) chamber, and the Aerosol Interaction and Dynamics in the Atmosphere (AIDA) chamber. Experiment type 1 simulated SOA formation at upper tropospheric conditions: SOA was generated in the AIDA chamber directly at 223 K at 61 % relative humidity (RH; experiment termed cold humid, CH) and for comparison at 6 % RH (experiment termed cold dry, CD) conditions. Experiment type 2 simulated SOA uplifting: SOA was formed in the APC chamber at room temperature (296 K) and < 1 % RH (experiment termed warm dry, WD) or 21 % RH (experiment termed warm humid, WH) conditions, and then partially transferred to the AIDA chamber kept at 223 K, and 61 % RH (WDtoCH) or 30 % RH (WHtoCH), respectively. Precursor concentrations varied between 0.7 and 2.2 ppm α-pinene, and between 2.3 and 1.8 ppm ozone for type 1 and type 2 experiments, respectively. Among other instrumentation, a chemical ionization mass spectrometer (CIMS) coupled to a filter inlet for gases and aerosols (FIGAERO), deploying I- as reagent ion, was used for SOA chemical composition analysis. For type 1 experiments with lower α-pinene concentrations and cold SOA formation temperature (223 K), smaller particles of 100-300 nm vacuum aerodynamic diameter (dva) and higher mass fractions (> 40 %) of adducts (molecules with more than 10 carbon atoms) of α-pinene oxidation products were observed. For type 2 experiments with higher α-pinene concentrations and warm SOA formation temperature (296 K), larger particles ( ˜ 500 nm dva) with smaller mass fractions of adducts (< 35 %) were produced. We also observed differences (up to 20 °C) in

Bed particle entrainment and motion in turbulent open-channel flows: a high-resolution experimental study

NASA Astrophysics Data System (ADS)

Nikora, Vladimir; Cameron, Stuart; Amir, Mohammad; Stewart, Mark; Witz, Matthew

2015-04-01

-bed open-channel flow assessed with multiple-order bulk velocity statistics, spectra, correlations, and structure functions; (2) identification and quantification of coherent motions, with particular focus on 'superstructures' (or 'very large scale motions' up to 40 flow depths in length); (3) assessment of secondary current effects on the flow structure; (4) statistical characteristics of fluctuating pressure acting on multiple bed particles, including spatial pressure correlations and their relations to the coherent structures; (5) estimates and statistical tests of waiting time distributions; (6) statistics of particle trajectories with particular focus on the initial stages of motion; and (7) identification of typical flow features accompanying particle entrainment. Among other findings, it has been shown, for the first time, that particle entrainment is likely to be associated with interactions between flow superstructures. The 'collisions' of superstructures, 'meandering' across the flow, generate regions of a particular velocity pattern leading to the particle entrainment. This study was supported by an EPSRC (UK) Grant EP/G056404/1, which was directly linked to DFG (Germany) Grants FR 1593/5-1/2, focus of which was on direct numerical simulations of mobile-bed flows. The authors are grateful to M. Uhlmann and C. Chan-Braun (Karlsruhe Institute of Technology) and J. Frohlich and B. Vowinckel (Dresden Technical University) for their useful suggestions and insightful discussions throughout the course of this project.

Airborne hygrometer calibration inter-comparison against a metrological water vapour standard

NASA Astrophysics Data System (ADS)

Smorgon, Denis; Boese, Norbert; Ebert, Volker

2014-05-01

Water vapour is the most important atmospheric greenhouse gas, which causes a major feedback to warming and other changes in the climate system. Knowledge of the distribution of water vapour and its climate induced changes is especially important in the upper troposphere and lower stratosphere (UT/LS) where vapour plays a critical role in atmospheric radiative balance, cirrus cloud formation, and photochemistry. But, our understanding of water in the UT/LS is limited by significant uncertainties in current UT/LS water measurements. One of the most comprehensive inter-comparison campaigns for airborne hygrometers, termed AQUAVIT (AV1) [1], took place in 2007 at the AIDA chamber at the Karlsruhe Institute of Technology (KIT) in Germany. AV1 was a well-defined, referred, blind inter-comparison of 22 airborne field instruments from 17 international research groups. One major metrological deficit of AV1, however, was, that no traceable reference instrument participated in the inter-comparison experiments and that the calibration procedures of the participating instruments were not monitored or interrogated. Consequently a follow-up inter-comparison was organized in April 2013, which for the first time also provides a traceable link to the international humidity scale. This AQUAVIT2 (AV2) campaign (details see: http://www.imk-aaf.kit.edu/aquavit/index.php/Main_Page) was again located at KIT/AIDA and organised by an international organizing committee including KIT, PTB, FZJ and others. Generally AV2 is divided in two parallel comparisons: 1) AV2-A uses the AIDA chamber for a simultaneous comparison of all instruments (incl. sampling and in-situ instruments) over a broad range of conditions characteristic for the UT/LS; 2) AV2-B, about which this paper is reporting, is a sequential comparison of selected hygrometers and (when possible) their reference calibration infrastructures by means of a chilled mirror hygrometer traced back to the primary National humidity standard

DACCIWA Cloud-Aerosol Observations in West Africa Field Campaign Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Chiu, J Christine; Blanchard, Yann; Hill, Peter

Leeds (UK). The instrument was supposed to operate in normal aerosol mode in clear-sky conditions for aerosol monitoring, and operate in cloud mode for measuring cloud properties when clouds block the sun. Unfortunately, the robot of the sun photometer did not work properly from the beginning of the deployment, and remained problematic throughout the campaign. No useful data was recovered. The second sun photometer was deployed at Savé, Benin (8.000842°N, 2.413115°E), set up and maintained by the Karlsruher Institut fuer Technologie, Germany. Unlike most sun photometers that are designed to monitor aerosol properties and thus operated in normal aerosol mode, this sun photometer at Savé was operated in a special cloud mode, pointing vertically and measuring zenith radiance continuously at wavelengths of 440, 500, 675, 870, 1020, and 1640 nm with 10-sec temporal resolution. Zenith radiances at 440, 870, and 1640 nm alone can be used to retrieve cloud optical depth and column-mean effective radius (Chiu et al. 2010, 2012). The following section takes 6 and 7 July as an example to highlight a typical diurnal cycle of clouds observed during the campaign. Cloud properties retrieved from zenith radiance are compared against those retrieved from microwave radiometer (MWR) measurements, and against in situ measurements collected from the Twin Otter aircraft.« less

MIPAS IMK/IAA CFC-11 (CCl3F) and CFC-12 (CCl2F2) measurements: accuracy, precision and long-term stability

NASA Astrophysics Data System (ADS)

Eckert, E.; Laeng, A.; Lossow, S.; Kellmann, S.; Stiller, G.; von Clarmann, T.; Glatthor, N.; Höpfner, M.; Kiefer, M.; Oelhaf, H.; Orphal, J.; Funke, B.; Grabowski, U.; Haenel, F.; Linden, A.; Wetzel, G.; Woiwode, W.; Bernath, P. F.; Boone, C.; Dutton, G. S.; Elkins, J. W.; Engel, A.; Gille, J. C.; Kolonjari, F.; Sugita, T.; Toon, G. C.; Walker, K. A.

2015-07-01

Profiles of CFC-11 (CCl3F) and CFC-12 (CCl2F2) of the Michelson Interferometer for Passive Atmospheric Sounding (MIPAS) abord the European satellite Envisat have been retrieved from versions MIPAS/4.61-MIPAS/4.62 and MIPAS/5.02-MIPAS/5.06 level-1b data using the scientific level-2 processor run by Karlsruhe Institute of Technology (KIT), Institute of Meteorology and Climate Research (IMK) and Consejo Superior de Investigaciones Científicas (CSIC), Instituto de Astrofísica de Andalucía (IAA). These profiles have been compared to measurements taken by the balloon borne Cryosampler, Mark IV (MkIV) and MIPAS-Balloon (MIPAS-B), the airborne MIPAS stratospheric aircraft (MIPAS-STR), the satellite borne Atmospheric Chemistry Experiment Fourier transform spectrometer (ACE-FTS) and the High Resolution Dynamic Limb Sounder (HIRDLS) as well as the ground based Halocarbon and other Atmospheric Trace Species (HATS) network for the reduced spectral resolution period (RR: January 2005-April 2012) of MIPAS Envisat. ACE-FTS, MkIV and HATS also provide measurements during the high spectral resolution period (FR: July 2002-March 2004) and were used to validate MIPAS Envisat CFC-11 and CFC-12 products during that time, as well as ILAS-II profiles. In general, we find that MIPAS Envisat shows slightly higher values for CFC-11 at the lower end of the profiles (below ~ 15 km) and in a comparison of HATS ground-based data and MIPAS Envisat measurements at 3 km below the tropopause. Differences range from approximately 10-50 pptv (~ 5-20 %) during the RR period. In general, differences are slightly smaller for the FR period. An indication of a slight high-bias at the lower end of the profile exists for CFC-12 as well, but this bias is far less pronounced than for CFC-11, so that differences at the lower end of the profile (below ~ 15 km) and in the comparison of HATS and MIPAS Envisat measurements taken at 3 km below the tropopause mainly stay within 10-50 pptv (~ 2-10 %) for the RR and

MIPAS IMK/IAA CFC-11 (CCl3F) and CFC-12 (CCl2F2) measurements: accuracy, precision and long-term stability

NASA Astrophysics Data System (ADS)

Eckert, E.; Laeng, A.; Lossow, S.; Kellmann, S.; Stiller, G.; von Clarmann, T.; Glatthor, N.; Höpfner, M.; Kiefer, M.; Oelhaf, H.; Orphal, J.; Funke, B.; Grabowski, U.; Haenel, F.; Linden, A.; Wetzel, G.; Woiwode, W.; Bernath, P. F.; Boone, C.; Dutton, G. S.; Elkins, J. W.; Engel, A.; Gille, J. C.; Kolonjari, F.; Sugita, T.; Toon, G. C.; Walker, K. A.

2016-07-01

Profiles of CFC-11 (CCl3F) and CFC-12 (CCl2F2) of the Michelson Interferometer for Passive Atmospheric Sounding (MIPAS) aboard the European satellite Envisat have been retrieved from versions MIPAS/4.61 to MIPAS/4.62 and MIPAS/5.02 to MIPAS/5.06 level-1b data using the scientific level-2 processor run by Karlsruhe Institute of Technology (KIT), Institute of Meteorology and Climate Research (IMK) and Consejo Superior de Investigaciones Científicas (CSIC), Instituto de Astrofísica de Andalucía (IAA). These profiles have been compared to measurements taken by the balloon-borne cryosampler, Mark IV (MkIV) and MIPAS-Balloon (MIPAS-B), the airborne MIPAS-STRatospheric aircraft (MIPAS-STR), the satellite-borne Atmospheric Chemistry Experiment Fourier transform spectrometer (ACE-FTS) and the High Resolution Dynamic Limb Sounder (HIRDLS), as well as the ground-based Halocarbon and other Atmospheric Trace Species (HATS) network for the reduced spectral resolution period (RR: January 2005-April 2012) of MIPAS. ACE-FTS, MkIV and HATS also provide measurements during the high spectral resolution period (full resolution, FR: July 2002-March 2004) and were used to validate MIPAS CFC-11 and CFC-12 products during that time, as well as profiles from the Improved Limb Atmospheric Spectrometer, ILAS-II. In general, we find that MIPAS shows slightly higher values for CFC-11 at the lower end of the profiles (below ˜ 15 km) and in a comparison of HATS ground-based data and MIPAS measurements at 3 km below the tropopause. Differences range from approximately 10 to 50 pptv ( ˜ 5-20 %) during the RR period. In general, differences are slightly smaller for the FR period. An indication of a slight high bias at the lower end of the profile exists for CFC-12 as well, but this bias is far less pronounced than for CFC-11 and is not as obvious in the relative differences between MIPAS and any of the comparison instruments. Differences at the lower end of the profile (below ˜ 15 km) and in

HEPPA-II model-measurement intercomparison project: EPP indirect effects during the dynamically perturbed NH winter 2008-2009

NASA Astrophysics Data System (ADS)

Funke, Bernd; Ball, William; Bender, Stefan; Gardini, Angela; Harvey, V. Lynn; Lambert, Alyn; López-Puertas, Manuel; Marsh, Daniel R.; Meraner, Katharina; Nieder, Holger; Päivärinta, Sanna-Mari; Pérot, Kristell; Randall, Cora E.; Reddmann, Thomas; Rozanov, Eugene; Schmidt, Hauke; Seppälä, Annika; Sinnhuber, Miriam; Sukhodolov, Timofei; Stiller, Gabriele P.; Tsvetkova, Natalia D.; Verronen, Pekka T.; Versick, Stefan; von Clarmann, Thomas; Walker, Kaley A.; Yushkov, Vladimir

2017-03-01

We compare simulations from three high-top (with upper lid above 120 km) and five medium-top (with upper lid around 80 km) atmospheric models with observations of odd nitrogen (NOx = NO + NO2), temperature, and carbon monoxide from seven satellite instruments (ACE-FTS on SciSat, GOMOS, MIPAS, and SCIAMACHY on Envisat, MLS on Aura, SABER on TIMED, and SMR on Odin) during the Northern Hemisphere (NH) polar winter 2008/2009. The models included in the comparison are the 3-D chemistry transport model 3dCTM, the ECHAM5/MESSy Atmospheric Chemistry (EMAC) model, FinROSE, the Hamburg Model of the Neutral and Ionized Atmosphere (HAMMONIA), the Karlsruhe Simulation Model of the Middle Atmosphere (KASIMA), the modelling tools for SOlar Climate Ozone Links studies (SOCOL and CAO-SOCOL), and the Whole Atmosphere Community Climate Model (WACCM4). The comparison focuses on the energetic particle precipitation (EPP) indirect effect, that is, the polar winter descent of NOx largely produced by EPP in the mesosphere and lower thermosphere. A particular emphasis is given to the impact of the sudden stratospheric warming (SSW) in January 2009 and the subsequent elevated stratopause (ES) event associated with enhanced descent of mesospheric air. The chemistry climate model simulations have been nudged toward reanalysis data in the troposphere and stratosphere while being unconstrained above. An odd nitrogen upper boundary condition obtained from MIPAS observations has further been applied to medium-top models. Most models provide a good representation of the mesospheric tracer descent in general, and the EPP indirect effect in particular, during the unperturbed (pre-SSW) period of the NH winter 2008/2009. The observed NOx descent into the lower mesosphere and stratosphere is generally reproduced within 20 %. Larger discrepancies of a few model simulations could be traced back either to the impact of the models' gravity wave drag scheme on the polar wintertime meridional circulation or

Synthesis, structural, electronic and linear electro-optical features of new quaternary Ag{sub 2}Ga{sub 2}SiS{sub 6} compound

DOE Office of Scientific and Technical Information (OSTI.GOV)

Piasecki, M., E-mail: m.piasecki@ajd.czest.pl; Myronchuk, G.L.; Parasyuk, O.V.

For the first time phase equilibria and phase diagram of the AgGaS{sub 2}–SiS{sub 2} system were successfully explored by differential thermal and X-ray phase analysis methods. Crystal structure of low-temperature (LT) modification of Ag{sub 2}Ga{sub 2}SiS{sub 6} (LРў- Ag{sub 2}Ga{sub 2}SiS{sub 6}) was studied by X-ray powder method and it belongs to tetragonal space group I-42d, with unit cell parameters a=5.7164(4) Å, c=9.8023(7) Å, V=320.32(7) Å{sup 3}. Additional details regarding the crystal structure exploration are available at the web page Fachinformationszentrum Karlsruhe. X-ray photoelectron core-level and valence-band spectra were measured for pristine LРў- Ag{sub 2}Ga{sub 2}SiS{sub 6} crystal surface. Inmore » addition, the X-ray photoelectron valence-band spectrum of LРў-Ag{sub 2}Ga{sub 2}SiS{sub 6} was matched on a common energy scale with the X-ray emission S Kβ{sub 1,3} and Ga Kβ{sub 2} bands, which give information on the energy distribution of the S 3p and Ga 4p states, respectively. The presented X-ray spectroscopy results indicate that the valence S p and Ga p atomic states contribute mainly to the upper and central parts of the valence band of LРў-Ag{sub 2}Ga{sub 2}SiS{sub 6}, respectively, with a less significant contribution also to other valence-band regions. Band gap energy was estimated by measuring the quantum energy in the spectral range of the fundamental absorption. We have found that energy gap Eg is equal to 2.35 eV at 300 K. LT-Ag{sub 2}Ga{sub 2}SiS{sub 6} is a photosensitive material and reveals two spectral maxima on the curve of spectral photoconductivity spectra at λ{sub max1} =590 nm and λ{sub max2} =860 nm. Additionally, linear electro-optical effect of LT-Ag{sub 2}Ga{sub 2}SiS{sub 6} for the wavelengths of a cw He-Ne laser at 1150 nm was explored. - Graphical abstract: Manuscript present the technology of growth and investigation of properties a new quaternary compound Ag{sub 2}Ga{sub 2}Si

PREFACE: International Conference on Strongly Correlated Electron Systems 2014 (SCES2014)

NASA Astrophysics Data System (ADS)

2015-03-01

The 2014 International Conference on Strongly Correlated Electron Systems (SCES) was held in Grenoble from the 7th to 11th of July on the campus of the University of Grenoble. It was a great privilege to have the conference in Grenoble after the series of meetings in Sendai (1992), San Diego (1993), Amsterdam (1994), Goa (1995), Zürich (1996), Paris (1998), Nagano (1999), Ann Arbor (2001), Krakow (2002), Karlsruhe (2004), Vienna (2005), Houston (2007), Buzios (2008), Santa Fe (2010), Cambridge (2011) and Tokyo (2013). Every three years, SCES joins the triennial conference on magnetism ICM. In 2015, ICM will take place in Barcelona. The meeting gathered an audience of 875 participants who actively interacted inside and outside of conference rooms. A large number of posters (530) was balanced with four parallel oral sessions which included 86 invited speakers and 141 short oral contributions. A useful arrangement was the possibility to put poster presentations on the website so participants could see them all through the conference week. Each morning two plenary sessions were held, ending on Friday with experimental and theoretical summaries delivered by Philipp Gegenwart (Augsburg) and Andrew Millis (Columbia). The plenary sessions were given by Gabriel Kotliar (Rutgers), Masashi Kawasaki (Tokyo), Jennifer Hoffman (Harvard), Mathias Vojta (Dresden), Ashvin Vishwanath (Berkeley), Andrea Cavalleri (Hamburg), Marc-Henri Julien (Grenoble), Neil Mathur (Cambridge), Giniyat Khaliullin (Stuttgart), and Toshiro Sakakibara (Tokyo). The parallel oral sessions were prepared by 40 symposium organizers selected by the chairman (Antoine Georges) and co-chairman (Kamran Behnia) of the Program Committee with the supplementary rule that speakers had not delivered an invited talk at the previous SCES conference held in 2013 in Tokyo. Special attention was given to help young researchers via grants to 40 overseas students. Perhaps due to the additional possibility of cheap

The case of the Upper Rhine: unravelling the past, wrapping up the future

NASA Astrophysics Data System (ADS)

Ergenzinger, P.; Bölscher, J.; de Jong, C.

2003-04-01

The southern Upper Rhine was once the most prominent braided river system in Germany. However it lost its character during the last 200 years and is now a trained river used for electricity and carrying ships to Basel(CH). The river sector between Basel and Strasburg(F) was always different to the Hochrhein (Lake Constance Basel) and to the lower Upper Rhine (Strasburg Bingen(D)). This ancient braided river system changed downstream according to the transition of grain sizes from cobbles to gravel and sand. Between Strasburg and Lauterburg(F) the braids were replaced by meanders and this geomorphological change induced many other changes. At thesed times the ecology, including the use of water and land, riparian forests, the development of flood defence and navigation were different. In addition there was a further problem for people living in the time of enlightment: how should the boundary of a state be defined within a braided river? In the German language braided rivers were and are still called “verwildert” and this means the river is going wild. As such, somebody who was able to improve this situation would gain merits. This happened to Johann Gottfried Tulla. He became the responsible engineer for river construction in the Great Duchy Baden. In 1812 he created a memorandum with recommodations for the future development of the river Rhine. Only 5 years later he succeeded with the first cutoff of a meander next to Karlsruhe. After his death a treaty between France and Baden regulated the elimination of the braided system between Basel and Lauterburg. The construction took place between 1840 and 1875. This development was opposed locally and by the Prussian and Dutch authorities who claimed - after the huge flood of 1824 - that the abnormal flood peak was a result of the meander cutoffs created in Baden. Nevertheless the results of training the braided system were technically convincing: a deeper river channel, less floods, a well defined border and finally

Fracture properties from tight reservoir outcrop analogues with application to geothermal exploration

NASA Astrophysics Data System (ADS)

Philipp, Sonja L.; Reyer, Dorothea; Afsar, Filiz; Bauer, Johanna F.; Meier, Silke; Reinecker, John

2015-04-01

ür Wissen¬schaft und Kultur' and 'Baker Hughes' within the gebo research project (http://www.gebo-nds.de), the Bundesministerium für Umwelt, Naturschutz, Bau und Reaktorsicherheit (BMU; FKZ: 0325302, AuGE) and the Deutsche Forschungsgemeinschaft. GeoEnergy GmbH, Karlsruhe, is thanked for explorational data.

PREFACE: XTOP 2004 -- 7th Biennial Conference on High Resolution X-Ray Diffraction and Imaging

NASA Astrophysics Data System (ADS)

Holý, Vaclav

2005-05-01

forward to the next XTOP conference, organized by Tilo Baumbach and his group, which will take place in Karlsruhe, Germany, in 2006.

PREFACE: International Conference on Computing in High Energy and Nuclear Physics (CHEP 2012)

NASA Astrophysics Data System (ADS)

Ernst, Michael; Düllmann, Dirk; Rind, Ofer; Wong, Tony

2012-12-01

Collaborative Tools. We would like to thank Brookhaven Science Associates, New York University, Blue Nest Events, the International Advisory Committee, the Program Committee and the Local Organizing Committee members for all their support and assistance. We also would like to acknowledge the support provided by the following sponsors: ACEOLE, Data Direct Networks, Dell, the European Middleware Initiative and Nexsan. Special thanks to the Program Committee members for their careful choice of conference contributions and enormous effort in reviewing and editing the conference proceedings. The next CHEP conference will be held in Amsterdam, the Netherlands on 14-18 October 2013. Conference Chair Michael Ernst (BNL) Program Committee Daniele Bonacorsi, University of Bologna, Italy Simone Campana, CERN, Switzerland Philippe Canal, Fermilab, United States Sylvain Chapeland, CERN, Switzerland Dirk Düllmann, CERN, Switzerland Johannes Elmsheuser, Ludwig Maximilian University of Munich, Germany Maria Girone, CERN, Switzerland Steven Goldfarb, University of Michigan, United States Oliver Gutsche, Fermilab, United States Benedikt Hegner, CERN, Switzerland Andreas Heiss, Karlsruhe Institute of Technology, Germany Peter Hristov, CERN, Switzerland Tony Johnson, SLAC, United States David Lange, LLNL, United States Adam Lyon, Fermilab, United States Remigius Mommsen, Fermilab, United States Axel Naumann, CERN, Switzerland Niko Neufeld, CERN, Switzerland Rolf Seuster, TRIUMF, Canada Local Organizing Committee Maureen Anderson, John De Stefano, Mariette Faulkner, Ognian Novakov, Ofer Rind, Tony Wong (BNL) Kyle Cranmer (NYU) International Advisory Committee Mohammad Al-Turany, GSI, Germany Lothar Bauerdick, Fermilab, United States Ian Bird, CERN, Switzerland Dominique Boutigny, IN2P3, France Federico Carminati, CERN, Switzerland Marco Cattaneo, CERN, Switzerland Gang Chen, Institute of High Energy Physics, China Peter Clarke, University of Edinburgh, United Kingdom Sridhara Dasu, University of

PREFACE: Proceedings of the 11th European Workshop of the European Microbeam Analysis Society (EMAS) on Modern Developments and Applications in Microbeam Analysis

NASA Astrophysics Data System (ADS)

2010-07-01

) Roenalytic GmbH (Germany) Target-Messtechnik (Germany) Thermo Fisher Scientific BV (The Netherlands) Clive T Walker EMAS President János L Lábár Research Institute for Technical Physics and Materials Science, HAS, Konkoly-Thege M. u. 29-33, HU-1121 Budapest, Hungary Clive T Walker European Commission, Joint Research Centre, Institute for Transuranium Elements, P.O. Box 2340, DE-76125 Karlsruhe, Germany Michal Zelechower Silesian University of Technology, Department of Materials Science, ul. Krasinskiego 8, PL-40019 Katowice, Poland Pawel Zieba Polish Academy of Sciences, Institute of Metallurgy and Materials Science, ul. W. Reymonta 25, PL-30059 Krakow, Poland

Synchrotron FT-IR analyses of microstructured biomineral domains: Hints to the biomineralization processes in freshwater cultured pearls.

NASA Astrophysics Data System (ADS)

Soldati, A. L.; Vicente-Vilas, V.; Gasharova, B.; Jacob, D. E.

2009-04-01

Recent investigations in freshwater cultured pearls (bio-carbonate) by micro-Raman spectroscopy (Wehrmeister et al., 2008; Soldati et al., 2008), Scanning Electron Microscopy (SEM) and Transmission Electron Microscopy (TEM) imaging (Jacob et al., 2008) show that the pearl biomineralisation starts with a self assembling process in which an existing gel matrix of amorphous calcium carbonate (ACC) and organic substances reorganizes and conglomerates in small domains; these conglomerates then form prisms and mature nacreous tablets of aragonite or vaterite. Raman spectroscopy shows that the calcium carbonate polymorphs have decreasing luminescence in the order ACC>Vaterite>Aragonite, coinciding with decreasing quantities of S and P (related to the organic matrix) measured by Laser Ablation Inductively Coupled Plasma Mass Spectroscopy (LA-ICP-MS) and Electron Probe Micro Analyzer (EPMA). Although little is known about the process of transformation of the ACC gel into vaterite and aragonite, it is speculated that this probably involves dehydration and change of the accompanying organic matrix. This is also supported by our laboratory FT-IR analysis. However, due to the small size of the areas of ACC (about 10 ?m) and the biogenic crystals an in-situ high spatially resolved IR-method is needed to record how the water content and organic matrix change in the biomineralisation sequence, to understand which processes take place in the self-organization. The beamline IR-1 at the ANKA synchrotron source (Karlsruhe, Germany) was used for this experiment. Freshwater cultured pearls from China cultured in Hyriopsis cumingii mussels by tissue nucleation methods (so-called beadless pearls) as well as by bead implantation methods (aragonite nucleus) were studied. The pearls were cut in half with a diamond-plated saw and polished with diamond paste on a copper plate. Micro-Raman spectroscopy maps (Department of Geosciences, at the Johannes Gutenberg-University, Mainz) were generated

Manganese speciation in Diplodon chilensis patagonicus shells: a XANES study

NASA Astrophysics Data System (ADS)

Soldati, A. L.; Vicente-Vilas, V.; Goettlicher, J.; Jacob, D. E.

2009-04-01

century, resolving the environmental signal annually and even seasonally (Soldati et al., 2008b). High resolution trace elemental analysis by LA-ICPMS and EPMA in the shells show that elements like Mg and Mn are related to the seasonal pattern and can be enriched along the organic-rich annual shell growth lines. Thus, these elements could possibly be bound organically instead of occupying a defined site in the crystal lattice of the calcium carbonate phase. LA-ICP-MS results show that Mn concentrations in these Diplodon shells range between 1000-300 g/g and 100-10 g/g and that the areas of enrichment are in the micrometer range. Raman and XRD measurements at high spatial resolution failed in recognizing whether the Mn is in carbonate solid solution or not. Therefore, speciation techniques like X-ray absorption fine structure (XAFS) spectroscopy with a high lateral resolution are required to address this question. Prior to XAFS spectroscopy the samples were mapped with the intensity of the Mn Kα fluorescence emission line in order to locate the Mn rich areas of interest. Because of the Mn concentrations in the sub % range the XAFS spectra at the positions of interest have been recorded in fluorescence mode using a 7 element Si(Li) detector. This study focuses on the near edge (XANES: X-ray absorption near edge structure) part of the spectra. For data evaluation, XANES spectra of reference substances were additionally measured in order to get first hints to Mn valence and bonding. As standards were used Mn and Mn rich carbonates, Mn oxides with Mn in different oxidation states, and Mn in organic compounds (Mn-porphyrin and Mn-acetate). The XAFS measurements have been carried out at the SUL-X beamline of the synchrotron radiation source ANKA of the Forschungszentrum Karlsruhe. Data evaluation is ongoing. References MEIBOM, A., CUIF, J.P., HOULBREQUE, F., MOSTEFAOUI, S., DAUPHIN, Y., MEIBOM; K.L. & DUNBAR, R. (2008). Compositional variations at ultra-structure length scales

Guest Editors' introduction

NASA Astrophysics Data System (ADS)

Magee, Jeff; Moffett, Jonathan

1996-06-01

reached a point at which a first generation of systems, based on policy representation within systems and automated monitoring systems, are coming into practical use. The papers also serve to identify many of the issues which are open research questions. In particular, as management systems increase in complexity, how far can we automate the refinement of high-level policies into implementations? How can we detect and resolve conflicts between policies? And how can monitoring services deal efficiently with ever-growing complexity and volume? We wish to acknowledge the many contributors, besides the authors, who have made this issue possible: the anonymous reviewers who have done much to assure the quality of these papers, Morris Sloman and his Programme Committee who convened the Workshop, and Thomas Usländer and his team at the Fraunhofer Institute in Karlsruhe who acted as hosts.

PREFACE: International Conference on Topics in Astroparticle and Underground Physics (TAUP 2011)

NASA Astrophysics Data System (ADS)

Oberauer, Lothar; Raffelt, Georg; Wagner, Robert

2012-07-01

The 12th edition of the International Conference on Topics in Astroparticle and Underground Physics (TAUP 2011) was held 5-9 September 2011 in Munich (and for the first time in Germany). It was organized by the Max Planck Institute for Physics (MPP), the Technical University Munich (TUM) and the Cluster of Excellence 'Origin and Structure of the Universe'. The conference was held in the 'Künstlerhaus', a traditional downtown location for artistic festivities. The meeting attracted 317 participants (61 of which were women) from 29 countries, see figure below. The topics covered by the meeting were Cosmology and particle physics, Dark matter and its detection, Neutrino physics and astrophysics, Gravitational waves and High-energy astrophysics and cosmic rays, and the various interfaces between these areas. The scientific sessions consisted of five mornings of plenary talks, four afternoons of parallel sessions, and an evening poster session. The co-founder of the conference series, Alessandro Bottino, has decided to retire from the position of chairman of the TAUP Steering Committee after the completion of TAUP 2011. On behalf of all followers of this series, we thank him for having started these inspiring events and his many years of dedicated service. We thank all speakers, conveners and participants as well as the members of the organizing, steering and international advisory committee for making this a successful and memorable meeting. Lothar Oberauer, Georg Raffelt, Robert Wagner Proceedings editors Figure Committees International Advisory Committee G AntonUniversity of Erlangen E AprileColumbia University M Baldo-CeolinUniversity of Padova R BattistonUniversity of Perugia & INFN L BergströmUniversity Stockholm R BernabeiUniversity of Rome 'Tor Vergata' A BettiniLSC Canfranc P BinetruyAPC Paris J BlümerKarlsruhe Institute of Technology B CabreraStanford University A CaldwellMax Planck Institute for Physics M ChenQueens University E CocciaUniversity of Rome

A Mediterranean atmospheric and oceanographic observatory in Corsica within the framework of HyMEx, ChArMEx and MERMEx

NASA Astrophysics Data System (ADS)

Lambert, D.

2009-09-01

and in the island area; • Thunderstorm and lightning activity studies; • Observation of Transient Luminous Events associated with thunderstorms; • Deployment of a Lightning Mapping Area; • Forest fire studies; • Numerical studies of heavy precipitation events; • Study of the climatology of the low troposphere composition (ozone and precursors); • Characterization of the aerosol microphysical and optical properties & vertical profiles; • Studies of the aerosol mixing; • Determination of the aerosol direct radiative impact and climate over the Mediterranean; • Determination of solar irradiance (UV and Visible spectrum); • Impact of the long-range transport on the air quality (gas and particles); • Deposition fluxes of desert dust and anthropogenic aerosols and their input of soluble elements (Fe, P, N, Hg…) impacting the marine trophic chain. This Corsican observatory would operate for all HyMEx, ChArMEx and MERMEx Long Observation Period, Enhanced Observation Period and Special Observation Periods. In addition, this observatory will be also supported by the MOOSE network (Mediterranean Ocean Observing System on Environment) to maintain a long term atmospheric observation of key parameters in this site. It is foreseen to deploy the KITcube mobile laboratory operated by the Karlsruhe Institute of Technology (KIT, Germany) on the northern tip of Corsica for an up to 12 month period within the framework of the wind profiler network at the French and Italian coast. All atmospheric (and oceanographic) measurement initiatives in Corsica are welcome to join the project.

Main Parameters of Soil Quality and it's Management Under Changing Climate

NASA Astrophysics Data System (ADS)

László Phd, M., ,, Dr.

2009-04-01

Reviewing Paper Introduction: Malcolm summarised the topic of soil quality and it's management in a well synthetized form in 2000. So, the soils are fundamental to the well-being and productivity of agricultural and natural ecosystems. Soil quality is a concept being developed to characterize the usefulness and health of soils. Soil quality includes soil fertility, potential productivity, contaminant levels and their effects, resource sustainability and environmental quality. A general definition of soil quality is the degree of fitness of a soil for a specific use. The existence of multiple definitions suggests that the soil quality concept continues to evolve (Kádár, 1992; Várallyay, 1992, 1994, 2005; Németh, 1996; Malcolm, 2000; Márton, 2005; Márton et al. 2007). Recent attention has focused on the sustainability of human uses of soil, based on concerns that soil quality may be declining (Boehn and Anderson, 1997). We use sustainable to mean that a use or management of soil will sustain human well-being over time. Lal (1995) described the land resources of the world (of which soil is one component) as "finite, fragile, and nonrenewable," and reported that only about 22% (3.26 billion ha) of the total land area on the globe is suitable for cultivation and at present, only about 3% (450 million ha) has a high agricultural production capacity. Because soil is in large but finite supply, and some soil components cannot be renewed within a human time frame, the condition of soils in agriculture and the environment is an issue of global concern (Howard, 1993; FAO, 1997). Concerns include soil losses from erosion, maintaining agricultural productivity and system sustainability, protecting natural areas, and adverse effects of soil contamination on human health (Haberern, 1992; Howard, 1993; Sims et al., 1997). Parr et al. (1992) state, "...soil degradation is the single most destructive force diminishing the world's soil resource base." Soil quality guidelines are intended to protect the ability of ecosystems to function properly (Kádár, 1992; Várallyay, 1992, 1994, 2005; Cook and Hendershot, 1996; Németh, 1996; Malcolm, 2000; Márton, 2005; Márton et al. 2007). The Hungarian Ministry of Environment and Water (HMEW, 2004) suggests that the Hungarian Regions should adopt a national policy "...that seeks to conserve and enhance soil quality...". Useful evaluation of soil quality requires agreement about why soil quality is important, how it is defined, how it should be measured, and how to respond to measurements with management, restoration, or conservation practices. Because determining soil quality requires one or more value judgments and because we have much to learn about soil, these issues are not easily addressed (Várallyay, 1992, 1994, 2005; Cook and Hendershot, 1996; Németh, 1996; Malcolm, 2000). Definitions of soil quality have been based both on human uses of soil and on the functions of soil within natural and agricultural ecosystems. For purposes of this work, we are showing soil quality within the context of managed agricultural ecosystems. To many in agriculture and agricultural research, productivity is analogous to soil quality. Maintaining soil quality is also a human health concern because air, groundwater and surface water consumed by humans can be adversely affected by mismanaged and contaminated soils, and because humans may be exposed to contaminated soils in residential areas (Kádár, 1992; Várallyay, 2005; Cook and Hendershot, 1996; Németh, 1996; Malcolm, 2000; Márton et al. 2007). Contamination may include heavy metals, toxic elements, excess nutrients, volatile and nonvolatile organics, explosives, radioactive isotopes and inhalable fibers (Sheppard et al., 1992; Cook and Hendershot, 1996). Soil quality is not determined by any single conserving or degrading process or property, and soil has both dynamic and relatively static properties that also vary spatially (Carter et al., 1997). Gregorich et al. (1994) state that "soil quality is a composite measure of both a soil's ability to function and how well it functions, relative to a specific use." Increasingly, contemporary discussion of soil quality includes the environmental cost of production and the potential for reclamation of degraded soils (Várallyay, 2005). Reasons for assessing soil quality in an agricultural or managed system may be somewhat different than reasons for assessing soil quality in a natural ecosystem. In an agricultural context, soil quality may be managed, to maximize production without adverse environmental effect, while in a natural ecosystem, soil quality may be observed, as a baseline value or set of values against which future changes in the system may be compared (Várallyay, 1994; Cook and Hendershot, 1996; Németh, 1996; Malcolm, 2000; Márton et al. 2007). Soil quality has historically been equated with agricultural productivity, and thus is not a new idea. Soil conservation practices to maintain soil productivity are as old as agriculture itself, with documentation dating to the Roman Empire (Jenny, 1961). The Storie Index (Storie, 1932) and USDA Land Capability Classification (Klingebiel and Montgomery, 1973) were developed to separate soils into different quality classes. Soil quality is implied in many decisions farmers make about land purchases and management, and in the economic value rural assessors place on agricultural land for purposes of taxation. Beginning in the 1930s, soil productivity ratings were developed in the United States and elsewhere to help farmers select crops and management practices that would maximize production and minimize erosion or other adverse environmental effects (Huddleston, 1984). These rating systems are important predecessors of recent attempts to quantitatively assess soil quality. In the 1970s, attempts were made to identify and protect soils of the highest productive capacity by defining "prime agricultural lands" (Miller, 1979). An idea related to soil quality is "carrying capacity". Carrying capacity is the number of individuals that can be supported in a given area (Budd, 1992). Soils with high productivity have high carrying capacity, and are considered to be high quality. Sustainability implies that a system does not exceed its carrying capacity over time. Recent attempts to define soil quality and develop indices to measure it have many of the properties of the earlier soil productivity ratings (Doran and Jones, 1996; Snakin et al., 1996; Seybold et al., 1997). Cox (1995) calls for national goals for soil quality that "... recognize the inherent links between soil, water and air quality." Haberern (1992) suggests that the decade of the 1990s is the time to study the soil as we have recognized and studied air quality and water quality in the preceding two decades. Air and water quality standards are generally based on maximum allowable concentrations of materials hazardous to human health. They are specified and enforced by regulators according to public uses of these resources. The result is that changes in air and water quality are now monitored to protect human health. With few exceptions, soil quality standards have not been set, nor have regulations been created regarding maintenance of soil quality (Várallyay, 2005; Cook and Hendershot, 1996; Malcolm, 2000; Márton et al. 2007). To the extent that soil has been the disposal site of hazardous wastes, as well as a pathway by which contamination or other applied chemicals may present a human health risk, sporadic 40 regulations of soil quality (in terms of contamination) does exist in the 27 European Union (EU) countries for not just new ones but an estimated 30 000 existing chemicals, today. These regulations are in the form of laws regulating hazardous waste, toxic substances, and pesticides. However, these standards are often contradictory, inconsistent with each other and with current methods of assessing risk. For example, in the United States, federal regulations supporting CERCLA (40 CFR) is a list of "hazardous substances" and the levels in various media (e.g., soil, water) to which the Environmental Protection Agency (EPA) must respond with a cleanup effort. However, EPA has fielded considerable controversy about contaminant levels and chemical forms that legitimately constitute a human health risk. Target cleanup levels have also been subject to debate and legislation. Soil quality assessment requires definition of a "clean" soil (Sims et al., 1997). From this point of view, good quality soil has been defined as posing "...no harm to any normal use by humans, plants or animals; not adversely affecting natural cycles or functions; and not contaminating other components of the environment" (Moen, 1988). The parallel to air and water quality is easy to draw on a conceptual level, but designation of soil quality standards is significantly complicated by soil variability and heterogeneity (Smith et al., 1993). Among the authors (Merker, 1956; Odell et al. 1984; Johnston et al., 1986; Reganold et al., 1990; Granatstein and Bezdicek, 1992; Kádár, 1992; Beke et al., 1994; Jenkinson et al., 1994; Schjenning et al., 1994; Murata et al., 1995; Biederbeck et al., 1996; Lindert et al., 1996; Romig et al., 1995; Warkentin, 1995; Carter et al., 1997; Gerzabeck et al., 1997; Seybold et al., 1997; Malcolm, 2000; Várallyay, 2005) and organizations defining soil quality are Larson and Pierce (1991), Karlen et al. (1997). The next section reviews some of the definitions and soil characteristics used to define soil quality. The reader should understand that the definition of soil quality and selection of soil characteristics needed to quantify soil quality are continuing to evolve. For example, Bouma (1989) recognized that an essential problem with definitions that produce carefully limited suitability classes is that empirical decisions must be made to separate the classes along what is essentially a continuum. That is, if soil organic matter is part of a soil quality definition, where on the continuum of soil organic matter content does one draw the line between a high quality and low quality soil? Does high organic matter content always indicate high soil quality? These are non-trivial questions under discussion by the soil science community. Carter et al. (1997) suggest a framework for evaluating soil quality that includes: 1. describing each soil function on which quality is to be based, 2. selecting soil characteristics or properties that influence the capacity of the soil to provide each function, 3. choosing indicators of characteristics that can be measured, and 4. using methods that provide accurate measurement of those indicators. The following soil functions appear frequently in the soil science literature: 1. soil maintains biological activity/productivity (Karlen et al., 1997), serves as medium for plant/crop growth (Arshad and Coen, 1992), supports plant productivity/yield (Arshad and Coen, 1992), supports human/animal health (Karlen et al., 1997); 2. partitions and regulates water/ solute flow through environment (Larson and Pierce, 1991; Arshad and Coen, 1992); 3. serves as an environmental buffer/filter (Larson and Pierce, 1991), maintains environmental quality (Arshad and Ccen, 1992); 4. cycles nutrients, water, energy and other elements through the biosphere (Anderson and Gregorich, 1984). Clearly, these functions are interrelated. Later in this chapter, discussion focuses on the first and third functions (productivity and environmental buffering) as encompassing those aspects of soil quality most debated in the literature. Larson and Pierce (1991) defined soil quality as "the capacity of a soil to function within the ecosystem boundaries and interact positively with the environment external to that ecosystem." Three soil functions are considered essential: provide a medium for plant growth, regulate and partition waterllow through the environment, and serve as an effective environmental filter. Arshad and Coen (1992) define soil quality as "the sustaining capability of a soil to accept, store and recycle water, minerals and energy for production of crops at optimum levels while preserving a healthy environment." They discuss terrain, climate and hydrology as site factors that contribute to soil quality and suggest that socioeconomic factors such as land use, operator and management should be included in a soil quality analysis. This approach is consistent with the FAO approach to land quality analysis (FAO, 1997). Karlen et al. (1992) define soil quality as "the ability of the soil to serve as a natural medium for the growth of plants that sustain human and animal life." Their definition is based on the role of soil quality in the long-term productivity of soil and maintenance of environmental quality. Doran and Parkin (1994) defined soil quality as "the capacity of a soil to function within ecosystem boundaries to sustain biological productivity, maintain environmental quality, and promote plant and animal health." Gregorich et al. (1994) define soil quality as "a composite measure of both a soil's ability to function and how well it functions relative to a specific use" or "the degree of fitness of a soil for a specific use." The Soil Science Society of America Ad Hoc Committee on Soil Health proposed that soil quality is "the capacity of a specific kind of soil to function, within natural or managed ecosystem boundaries, to sustain plant and animal productivity, maintain or enhance water and air quality, and support human health and habitation" (Karlen et al., 1997). This definition requires that five functions must be evaluated to describe soil quality: 1. sustaining biological activity, diversity, and productivity; 2. regulating and partitioning water and solute flow; 3. filtering, buffering, degrading, immobilizing and detoxifying organic and inorganic materials, including industrial and municipal byproducts and atmospheric deposition; 4. storing and cycling nutrients and other elements within the earth's biosphere; and 5. providing support of socioeconomic structures and protection for archeological treasures associated with human habitation. No soil is likely to successfully provide all of these functions, some of which occur in natural ecosystems and some of which are the result of human modification. We can summarize by saying that soil quality depends on the extent to which soil functions to benefit humans. Thus, for food production or mediation of contamination, soil quality means the extent to which a soil fulfills the role we have defined for it. Within agriculture, high quality equates to maintenance of high productivity without significant soil or environmental degradation. The Glossary of Soil Science terms produced by the Soil Science Society of America (1996) states that soil quality is an inherent attribute of a soil that is inferred from soil characteristics or indirect observations. To proceed from a dictionary definition to a measure of soil quality, a minimum dataset (MDS) of soil characteristics that represents soil quality must be selected and quantified (Papendick et al., 1995). The MDS may include biological, chemical or physical soil characteristics [Organic matter (OM), Aggregation (A), Bulk density (BD), Depth to hardpan (DH), Electrical conductivity (EC), Fertility (F), Respiration (R), pH, Soil test (ST), Yield (Y), Infiltration (I), Mineralizable nitrogen potential (MNP), Water holding capacity (WHC)]. For agriculture, the measurement of properties should lead to a relatively simple and accurate way to rank soils based on potential plant production without soil degradation. Unfortunately, commonly identified soil quality parameters may not correlate well with yield (Reganold, 1988). In the next section, we consider these four points concerning the selection and quantification of soil characteristics: 1. soil characteristics may be desirable or undesirable, 2. soil renewability involves judgment of the extent to which soil characteristics can be controlled or managed, 3. rates of change in soil characteristics vary, and 4. there may be significant temporal or spatial variation in soil characteristics. Components of soil quality definitions may include desirable and undesirable characteristics. Desirable soil characteristics may either be the presence of a property that benefits soil productivity and/or other important soil functions, or the absence of a property that is detrimental to these functions. A soil characteristic may include a range of values that contributes positively to quality and a range that contributes negatively. Soil pH, for example, may be a positive or negative characteristic depending on its value. Larson and Pierce (1991) suggest that ranges of property values can be defined as optimal, suboptimal or superoptimal. A pH range of 6 to 7.5 is optimal for production of most crops. Outside of this range, pH is suboptimal and soil quality is lower than at the optimal pH range. The complexity of the soil quality concept is illustrated by the fact that the choice of optimal pH range is crop or use dependent. Letey (1985) suggested that identification of a range of water content that is nonlimiting to plant productivity might be a good way of assessing the collective effect of soil physical characteristics that contribute to crop productivity. For soils of decreasing quality, the width of the nonlimiting water range decreases. Undesirable soil characteristics may be either the presence of contaminants or a range of values of soil characteristics that contribute negatively to soil quality. The presence of chemicals that inhibit plant root growth or the absence of nutrients that result in low yields or poor crop quality are examples of undesirable soil characteristics that lower soil quality. The extent to which soil is viewed as a renewable resource shapes our approach to soil quality. "Soil" in this context is the natural, three-dimensional, horizonated individual, not something created by earth moving machinery. For the purpose of assessing human impact on sustainability of soil quality, it may be appropriate to use only those soil properties that are slowly or nonrenewable. Shorter term assessments may be based on those properties that change rapidly and are subject to easy management. Willis and Evans (1977) argued that soil is not renewable over the short term based on studies that suggest that 30 to more than 1,000 years are required to develop 25 mm of surface soil from parent material by natural processes. Jenny (1980) also argued that soil is not renewable over the time scale to which humans relate. Howard (1993) suggests defining soil quality based on undisturbed natural soils and to set quality standards based on changes in soils which cannot be reversed naturally or by ecological approaches. The renewability of soil depends on the soil property considered. For example, once soil depth is reduced by wind or water erosion so that it is too shallow to support crops, it is not renewable within a human or management time frame. Some important soil characteristics are slowly renewable. Organic matter, most nutrients and some physical properties may be renewed through careful long-term management. Certain chemical properties (pH, salinity, N, P, K content) may be altered to a more satisfactory range for agriculture within a growing season or two, while removal of unwanted chemicals may take much longer. No soil property is permanent, but rates and frequency of change vary widely among properties. Soil properties also vary with ecosystem, arguably depending most on climate. In rangelands, for example, temporal variability is high and relatively unpredictable due to the strong dependence of soil properties on soil wetness (Herrick and Whitford, 1995). Variability in soil wetness is not restricted to rangelands and may be an especially important determinant of microbial community structure and function in both irrigated and rainfed agricultural systems. Arnold et al. (1990) suggest that changes in soil properties can be nonsystematic, periodic, or trend. Nonsystematic changes are short term and unpredictable. Periodic are predictable and trend changes tend to be in one direction over time. Carter et al. (1997) distinguish between dynamic soil properties that are most subject to change through human use and are strongly influenced by agronomic practices, and intrinsic or static properties that are not subject to rapid change or management. Examples of dynamic soil characteristics are the size, membership, distribution, and activity of a soil's microbiological community; the soil solution composition, pH, and nutrient ion concentrations, and the exchangeable cation population. Soils respond quickly to changes in conditions such as water content. As a result, the optimal frequency and distribution of soil measurements vary with the property being measured. Soil mineralogy, particle size distribution and soil depth are static soil quality indicators. Although changes occur continuously, they are slow under natural conditions. Organic matter content may be a dynamic variable, but the chemical properties of organic matter may change only over periods on the order of 100 to 1,500 years depending on texture. Soil properties that change quickly present a problem because many measurements are needed to know the average value and to determine if changes in the average indicate improvement or degradation of soil quality. Conversely, properties that change very slowly are insensitive measures of short-term changes in soil quality. Papendick et al. (1995) argue that the MDS required for soil quality analysis includes a mix of "dynamic" and relatively "static" properties. A soil quality assessment must specify area. One could use the pedon (the three-dimensional soil individual) as the unit of measure, or a soil map unit, a landscape, a field or an entire watershed. The choice will depend to some degree on what property is of interest and the spatial variability of the property. Karlen et al. (1997) propose that soil quality can be evaluated at scales ranging from points to regional, national and international. They suggest that the more detailed scales provide an opportunity to "understand" soil quality while larger scale approaches provide interdisciplinary monitoring of soil quality and changes in soil quality. Pennock et al. (1994) discuss scaling up data from discrete sampling points to landscape and regional scales. Soil physical characteristics [Aeration (A), Aggregate stability (AS), Bulk density (BD), Clay mineralogy (CM), Color (C), Consistence (dry (CD), moist (CM), wet (CW)), Depth to root limiting layer (DRLL), Hydraulic conductivity (HC), Oxygen diffusion rate (ODR), Particle size distribution (PSD), Penetration resistence (PR), Pore connectivity (PC), Pore size distribution (PSD), Soil strength (SS), Soil tilth (ST), Structure type (STY), Temperature (T), Total porosity (TP), Water-holding capacity (WHC)] are a necessary part of soil quality assessment because they often cannot be easily improved (Wagenet and Hutson, 1997). Larson and Pierce (1991) summarize the physical indicators of soil quality as those properties that influence crop production by determining: 1. whether a soil can accommodate unobstructed root growth and provide pore space of sufficient size and continuity for root penetration and expansion, 2. the extent to which the soil matrix will resist deformation, and 3. the capacity of soil for water supply and aeration. Factors such as effective rooting depth, porosity or pore size distribution, bulk density, hydraulic conductivity, soil strength and particle size distribution capture these soil functions (Malcolm, 2000; Várallyay, 2005). Reganold and Palmer (1995) use texture, color, dry and moist consistence, structure type, a structure index, bulk density of the 0-5 cm zone, penetration resistance of 0 to 20 and 20 to 40 cm zones and topsoil thickness as physical determinants of soil quality. Letey (1994) suggests that structure, texture, bulk density, and profile characteristics affect management practices in agriculture but are not directly related to plant productivity. He proposes that water potential, oxygen diffusion rate, temperature, and mechanical resistance directly affect plant growth, and thus are the best indicators of the physical quality of a soil for production. Soil tilth, a poorly defined term that describes the physical condition of soil, also may be an indicator of a soil's ability to support crops. Farmers may assess soil tilth by kicking a soil clod. More formal measurements to describe soil ti]th include bulk density, porosity, structure, roughness and aggregate characteristics (Karlen et al., 1992). Many of the processes that contribute to soil structure, aggregate stability, bulk density and porosity are not well understood, making soil tilth a difficult parameter to quantify. Soil depth is an easily measured and independent property that provides direct information about a soil's ability to support plants. Effective soil depth is the depth available for roots to explore for water and nutrients. Layers that restrict root growth or water movement include hard rock, naturally dense soil layers such as fragipans, petrocalcic and, petroferric horizons, duripans, and human-induced layers of high bulk density such as plow pans and traffic pans. Effective soil depth is a problem for agricultural use of over 50% of soils in Africa (Eswaran et al., 1997). Soil depth requirements vary with crop or species. Many vegetable crops, for example, are notably shallow rooted while grain crops and some legumes like alfalfa are deep rooted. Variation will be even greater in unmanaged, natural systems. Wheat yield in Colorado was shown to decrease from 2,700 to 1,150 kg ha' over a 60-yr period of cultivation primarily due to decrease in soil depth (Bowman et al., 1990). Assessment of soil quality based on soil chemistry, whether the property is a contaminant or part of a healthy system, requires a sampling protocol, a method of chemical analysis, an understanding of how its chemistry affects biological systems and interacts with mineral forms, methods for location of possible contamination, and standards for soil characterization (Várallyay, 2005; Németh, 1996; Malcolm, 2000). Some soil chemical properties suggested as soil quality indicators are: Base saturation percentage (BSP), Cation exchange capacity (CEC), Contaminant availability (CA), Contaminant concentration (CC), Contaminant mobility (CM), Contaminant presence (CP), Electrical conductivity (EC), ESP, Nutrient cycling rates (NCR), Ph, Plant nutrient availability (PNA), Plant nutrient content (PNC) and SAR. Nutrient availability depends on soil physical and chemical processes, such as weathering and buffering, and properties such as organic matter content, CEC and pH (Kádár, 1992; Várallyay, 1992, 1994, 2005; Németh, 1996; Malcolm, 2000; Márton, 2005; Márton et al. 2007). At low and high pH, for example, some nutrients become unavailable to plants and some toxic elements become more available. Larson and Pierce (1991) chose those chemical properties that either inhibit root growth or that affect nutrient supply due to the quantity present or the availability. Reganold and Palmer (1995) used chemical parameters related to nutrient availability as measures of soil quality, including CEC, total N and P, pH and extractable P, S, Ca, Mg and K. Karlen et al. (1992) suggest that total and available plant nutrients, and nutrient cycling rates, should be included in soil quality assessments. Soil properties may be severely compromised by intended or unintended human additions of chemical compounds and soil productivity reduced if unwanted chemicals exceed safe thresholds. Data are required to determine whether or not a site is significantly polluted and if it requires clean-up (Sims et al., 1997). International standard methods have been created to maintain the quality of measurements (Hortensius and Welling, 1996). A difficult determination is the level of each chemical that is considered an ecological risk. Beck et al. (1995) provide a list of levels for organic chemicals adopted by The Netherlands and Canada. EPA uses similar lists for compounds considered hazardous (e.g., 40 CFR). Sims et al. (1997) argue that clean and unclean are two extremes of a continuum and that it is more appropriate to define the physical, chemical and biological state of the soil as acceptable or unacceptable. In The Netherlands, soil quality reference values have been created for heavy metals and organic chemicals based on a linear relationship with soil clay and organic matter content. The Dutch Ministry of Housing, Physical Planning and Environment has used the maximum of a range of reference values for a given substance as a provisional reference value for good soil quality (Howard, 1993). The focus of many soil quality definitions is soil biology [Organic carbon (OC), Microbial biomass (MB), C and N, Total bacterial biomass (TBB), Total fungal biomass (TFB), Potentially mineralizable N (PMN), Soil respiration (SR), Enzymes (Dehydrogenase, Phosphatase, Arlysulfatase), Biomass C/total organic carbon, Respiration/biomass, Microbial community fingerprinting (MCF), Substrate utilization (SU), Fatty acid analysis (FAA), Nucleic acid analysis (NAA)]. Soil supports a diverse population of organisms, ranging in size from viruses to large mammals, that usually interacts positively with plants and other system components (Paul and Clark, 1996). However, some soil organisms such as nematodes, bacterial and fungal pathogens reduce plant productivity. Many proposed soil quality definitions focus on the presence of beneficial rather than absence of detrimental organisms, although both are critically important. Various measures of microbial community viability have been suggested as measures or indices of soil quality. Community level studies consider species diversity and frequency of occurrence of species. Visser and Parkinson (1992) found that diverse soil microbiological criteria may be used to indicate deteriorating or improving soil quality. They suggested testing the biological criteria for soil quality at three levels: population, community and ecosystem. Microorganisms and microbial communities are dynamic and diverse, making them sensitive to changes in soil conditions (Kennedy and Papendick, 1995). Their populations include fungi, bacteria including actinomycetes, protozoa, and algae. Soil microorganisms form crucial symbiotic relationships with plants, including mycorrhizal infection for P and N acquisition and bacterial infection for fixation of atmospheric N. Authors emphasizing use of biological factors as indicators of soil quality often equate soil quality with relatively dynamic properties such as microbial biomass, microbial respiration, organic matter mineralization and denitrification, and organic matter content (Yakovchenko et al., 1996; Franzluebbers and Arshad, 1997), or soil microbial C, phospholipid analyses and soil enzymes (Gregorich et al., 1997), or total organic C and N (Franco-Vizcaino, 1997). Visser and Parkinson (1992) question the suitability of enzyme assays for microbial activity and soil quality assessments. Waksman (1927), who studied measurements of soil microorganisms that could indicate soil fertility, found that physical and chemical factors as well as soil biology were needed to predict soil fertility. Meso- and macrofauna populations have also been considered as part of soil quality definitions (Berry, 1994). One could choose to use presence or absence of a particular species or population of a particular species as a measure of soil quality. Stork and Eggleton (1992) discuss species richness as a powerful indicator of invertebrate community and soil quality, although determining the number of species is a problem. They suggest that keystone species, taxonomic diversity at the group level, and species richness of several dominant groups of invertebrates can be used as part of a soil quality definition. Measuring soil fauna populations involves decisions about which organisms to measure and how to measure them. An example is the earthworm population, the size of which is frequently mentioned as an important measure of soil quality. Measurement choices include numbers of organisms per volume or weight of soil, number of species, or a combination of numbers of organisms and species. Reganold and Palmer (1995) use total earthworms per square meter, total earthworm weight (g m-') and average individual earthworm weight as biological indicators of soil quality. Measurement of one or more components of the N cycle including ammonification, nitrification and nitrogen fixation, may be used to assess soil fertility and soil quality (Visser and Parkinson, 1992). Presumably, high rates of N turnover may infer a dynamic and healthy soil biological community. In contrast, low soil quality or poor soil health may be inferred from lack of N turnover. The interpretation of N turnover rates is highly dependent on the kinds of substrates added to soils and climate variables such as soil temperature and moisture. One needs to be careful when comparing N turnover rates within soils and among different soils to be sure that the cause of differences is a soil quality parameter and not natural variability. Presence of pesticide residues, for example, may reduce N turnover rate. In such an instance, both the presence of the pesticide and the N turnover rate would be needed to determine that the soil quality had been impaired. Production incorporates use of and need for functioning soil resources in agriculture, and environmental buffering incorporates the direct and indirect effects of human use on ecosystem function and human health (Kádár, 1992; Várallyay, 1992, 1994, 2005; Németh, 1996; Malcolm, 2000; Márton, 2005; Márton et al. 2007). Worldwide agriculture is the most extensive human land use, and soil characteristics are a critical determinant of agricultural productivity. Agriculture includes irrigated and rainfed cultivated cropland, permanent crops such as orchards and vineyards, irrigated pasture, range, and forestry. Each cropping system has distinct soil and soil management conditions for optimal production. It has been suggested that soil productivity is the net resultant of soil degradation processes and soil conservation practices (Parr et al., 1990). An appropriate definition of soil quality and the criteria necessary to evaluate and monitor soil quality is a step toward "the development of systematic criteria of sustainability". Issues to be considered when discussing soil quality for agriculture include: 1. How are productivity and sustainability related? 2. Is the cropping system in question cultivated or non-cultivated? 3. Is the cropping system in question an irrigated or dryland system? Sustainability of agricultural systems is critical to human welfare and is an a subject of research and debate (Letey, 1994). High productivity and sustainability must be converging goals if the growing human population is to be fed without destroying the resources necessary to produce food. Sustainability implies that a system is at a desirable steady state. Thermodynamically, soil is an open system through which matter and energy flow and a steady state is characterized by a minimum production of entropy (Andiscott, 1995). Ellert et al. (1997) review related literature on ways of assessing soil function on an ecosystem scale, commenting that the complexity and organization of living systems, which seem to defy the second law of thermodynamics (increasing disorder/entropy), may provide a means to broadly assess ecosystem function. The purpose of agriculture is to provide products for human sustenance and by definition is not sustainable unless the nutrients removed in the products are returned to the soil. Many of the arguments about the sustainability of agricultural systems relate to the form in which nutrients are most sustainably returned. No agricultural system will be sustainable in the long run without management that considers nutrient cycling and energy budgets. The more intense the agricultural system, the more energy and resources must be expended to maintain the system. The relative quality of a soil for agriculture can depend on the resources available to farmers. In the United States, resources may be readily available for management of dynamic soil properties such as nutrient or water status. In other countries, farmers may be resource poor, and agricultural systems are generally low input, meaning that large-scale irrigation is absent, use of fertilizers, pesticides, and herbicides is minimal, and high energy, mechanized equipment is not available (Eswaran et a1.,1997). This means, for example, that soil quality for agriculture will be more dependent on climate than if the same soils were part of a highly managed, irrigated system. Similarly, sustainability is more dependent on maintenance of dynamic soil properties because resources may not exist to remedy losses (Várallyay, 2005; Malcolm, 2000; Márton et al. 2007). It is difficult to overstate the importance of irrigation to food production. One-third of the total global harvest of food comes from the 17% (250 million ha) of the world's cropland that is irrigated (Hoffman et al., 1990); three-quarters of which are in developing countries (Tribe, 1994). India, China, the former Soviet Union, the United States and Pakistan have the greatest area of irrigated land. Should soil quality criteria be the same for irrigated and dryland agriculture? Sojka (1996) suggests that the arid and semi-arid soils that support most irrigated agriculture have thin erodible surfaces, characteristics that would classify such soils as having poor quality. Yet under irrigation, they feed much of the world. Without irrigation, for example, in many African soils, moisture stress becomes a significant factor limiting production, and the water-holding capacity of a soil becomes crucial (Eswaran et al., 1997). This suggests that a standard set of criteria based on potential productivity is not a sufficient definition of soil quality. Soils that are not cultivated are a much larger component of agriculture, broadly defined, than those that are cultivated. About 65% of the land in the United States is forest (284 million ha) or range land (312 million ha), with only about 284 million hacultivated (NRC,1994). Herrick and Whitford (1995) suggest that range land soils, which often serve multiple uses, present unique challenges and opportunities for assessing soil quality because spatial and temporal variability are higher than in cropped systems. On range lands and forest lands, food, fiber, timber production, biomass for fuel, wildlife, biodiversity, recreation, and water supply are all potential uses that may have diverse criteria for quality soils. Herrick and Whitford (1995) give the example of a thick O horizon that may be an indicator of good timber production but has no predictive value of soil quality for the rancher. The National Research Council (NRC, 1994) recommends that range land health be determined using three criteria: degree of soil stability and watershed function, integrity of nutrient cycles and energy flows, and presence of functioning recovery mechanisms. Soil erosion by wind and water and infiltration or capture of precipitation were selected as processes that could be used as indicators of soil stability and watershed function. Specific indicators or properties need to be related to these two broad processes. The amount of nutrients available, the speed with which nutrients cycle, and measures of the integrity of energy flow through the system were considered fundamental components of range land health. Finally, the capacity of range land ecosystems to react to change depends on recovery mechanisms that result in capture and cycling of nutrients, capture of energy, conservation of nutrients, energy and water, and resilience to change. Specific indicators include status of vegetation, age class and distribution (Kádár, 1992; Várallyay, 1992, 1994, 2005; Németh, 1996; Malcolm, 2000; Márton et al. 2007). The evaluation of land quality for forestry is a well-known practice. Indices range from quantitative through semi-quantitative to qualitative. Quantitative evaluations, such as site index, use regression equations to predict tree height at a predetermined tree age based on soil and climate data. Qualitative evaluations assign land to classes based on soil and climate properties. In soil science, the term "buffer" refers collectively to processes that constrain shifts in the dissolved concentration of any ion when it is added to or removed from the soil system (Singer and Munns, 1996). Soils "buffer" nutrients as well as contaminants and other solutes, via sorption to or incorporation into clay and organic materials. The extent to which a soil immobilizes or chemically alters substances that are toxic, thus effectively detoxifying them, reflects "quality" in the sense that humans or other biological components of the system are protected from harm. This is the basis for the European concept of soil quality (Moen, 1988; Siegrist, 1989; Denneman and Robberse, 1990). Lack of soil function in this category is reflected as direct toxicity or as contamination of air or water. Identifying substances that qualify as "contaminants" can be challenging because some, such as nitrates and phosphates, are important plant nutrients as well as potential water pollutants. An example is agricultural runoff containing N03 or soluble P (Yli-Halla et al., 1995). This chapter does not attempt a comprehensive review of research in this area, which is covered in an earlier chapter, but instead presents a few sample articles pertinent to this aspect of soil quality. Holden and Firestone (1997) define soil quality in this context as "the degree to which the physical, chemical, and biological characteristics of the soil serve to attenuate environmental pollution." Howard (1993) defines the ecological risk of a chemical in the environment as "the probability that a random species in a large community is exposed to a concentration of the chemical greater than its no-effect level." The extent to which a soil is capable of reducing the probability of exposure is a measure of its quality. A well-studied example of a common soil contaminant is Pb (McBride et al., 1997). Although legislated limits may be on a concentration basis in soil (e.g., 500 ftg kg-'), risk assessment techniques have attempted to account for the chemical form of Pb present, as well as the observed relative relationship between the amount of Pb present in soil and blood levels in local residents (Bowers and Gauthier, 1994). Critics have questioned analytical techniques used to determine bioavailable levels of Pb in soil, as well as the degree to which toxicity data account for its chemical fate and ecologically damaging properties (Cook and Hendershot, 1996). Natural variability of soils and variation within a soil series make average values or average background values inadequate for soil quality assessments. In addition, bioaccumulation and toxicity need to be considered when establishing levels of toxicants that may not be exceeded in a "high quality" soil for a given use (Traas et al. 1996). Another example is the effect of heavy metals such as Cr(VI) on soil biological properties. Based on a study of three New Zealand soils of contrasting texture, organic matter content, and CEC, Speir et al. (1995) propose an "ecological dose value" that represents the inhibitory effects of a heavy metal (in this case, Cr(VI)) on the kinetics of soil biological properties, and serves as a generic index for determination of permissible concentration levels for heavy metals in soils. A single soil characteristic is of limited use in evaluating differences in soil quality (Reganold and Palmer, 1995). Using more than one quantitative variable requires some system for combining the measurements into a useful index (Halvorson et al., 1996). The region, crop, or general soil use for which an index was created will likely limit its effectiveness outside the scope of its intended application. Even an index designed only to rate productivity is not likely to be useful for all crops and soils, leading Gersmehl and Brown (1990) to advocate regionally targeted systems. Rice is a good example of a crop requiring significantly different soil properties than other crops. It is a food staple for a large proportion of the world population. Approximately 146 million ha were in rice production in 1989 (FAO, 1989) mainly (90%) in Asia. High quality soils for paddy rice may be poor quality for most other irrigated and dryland crops because they may be saline or sodic, and high in clay with slow infiltration and permeability. These physical and chemical properties often constrain production of other crops. Although they are not reviewed here, various land suitability classifications specifically for rice have been developed since the turn of the century (Dent, 1978). Examples of several soil quality indexing systems are presented in the following sections. To some extent, recent attempts to enumerate the factors of soil quality resemble Jenny's (1941) introduction of the interrelated factors of soil formation. An index is categorized here as nonquantitative if it does not combine evaluated parameters into a numerical index that rates soils along a continuous scale. Examples are the USDA Land Capability Classification and the US Bureau of Reclamation (USBR) Irrigation Suitability. The purpose of the Land Capability Classification (LCC) was to place arable soils into groups based on their ability to sustain common cultivated crops that do not require specialized site conditioning or treatment (Klingebiel and Montgomery, 1973). Nonarable soils, unsuitable for long-term, sustained cultivation, are grouped according to their ability to support permanent vegetation, and according to the risk of soil damage if mismanaged. The LCC combines three rating values at different levels of abstraction: capability class, subclass, and unit. At the most general level, soils are placed in eight classes according to whether they (a) are capable of producing adapted plants under good management (classes I to N), (b) are capable of producing specialized crops under highly intensive management involving "elaborate practices for soil and water conservation" (classes V to VII), or (c) do not return on-site benefits as a result of management inputs for crops, grasses or trees without major reclamation (Klingebiel and Montgomery, 1973). The four possible limitations/hazards under the subclass rating are erosion hazard, wetness, rooting zone limitations and climate. The capability unit groups soils that have about the same responses to systems of management and have longtime estimated yields that do not vary by more than 25% under comparable management. The issue of critical limits is a difficult one in soils because of the range of potential uses and the interactions among variables (Arshad and Ccen, 1992). Several studies have shown that lands of higher LCC have higher productivity than lands of lower LCC (Patterson and Mackintosh, 1976; van Vliet et al., 1979; Reganold and Singer, 1984). In a study of 744 alfalfa, corn, cotton, sugar beet and wheat growing fields in the San Joaquin Valley of California, those with LCC ratings between 1 and 3 had significantly lower input/output ratios than fields with ratings between 3.01 and 6 (Reganold and Singer, 1984). This suggests that use of the LCC system provides an economically meaningful assessment of soil quality for agriculture. This was a frequently used system of land evaluation for irrigation in the Western US during the period of rapid expansion of water delivery systems (McRae and Burnham, 1981). It combines social and economic evaluations of the land with soil and other ecological variables to determine if the land has the productive capacity, once irrigated, to repay the investment necessary to bring water to an area. It recognizes the unique importance of irrigation to agriculture and the special qualities of soils that make them irrigable. Quantitative systems result in a numerical index, typically with the highest number being assigned to the best quality soils. Systems may be additive, multiplicative or more complex functions. They have two important advantages over nonquantitative systems: 1. they are easier to use with GIS and other automated data retrieval and display systems, and 2. they typically provide a continuous scale of assessment. No single national system is presently in use but several state or regional systems exist. Although he considered the productivity of the land to be dependent on 32 soil, climate and vegetative properties [Surface conditions: Physiographic position, Slope, Microrelief, Erosion deposition, External drainage, runoff. Soil physical conditions: Soil color, Soil depth, Soil density and porosity, Soil permeability, Soil texture, Stoniness, Soil structure, Soil workability-consistence, Internal drainage, Water-holding capacity, Plant-available water. Soil chemical conditions: Organic matter, Nitrogen, Reaction, Calcium carbonate, bases, Exchange capacity, Salts: Cl, SO Na, Toxicities, e.g., B, Available P, Available K, Minor elements, e.g., Zn, Fe, Fertility. Mineralogical conditions: Mineralogy. Climate: Precipitation Temperature Growing season Winds. Vegetativé cover: Natural vegetation], only nine properties were used in the SIR, because incorporating a greater number of factors made the system unwieldy. The nine factors are soil morphology (A), surface texture (B), slope (C), and six variables (X.) that rate drainage class, sodicity, acidity, erosion, microrelief and fertility; rated from 1% to 100%. These are converted to their decimal value and multiplied together (Storie, 1964). Values for each factor were derived from Storie's experience mapping and evaluating soils in California, and in soil productivity studies in cooperation with the California Agricultural Experiment Station cost-efficiency projects relating to orchard crops, grapes and cotton. In describing the SIR (SIR= [AxBxCxIIXi]x100), Storie (1932, 1964) explicitly mentioned "soil quality". Soils that were deep, had no restricting subsoil horizons, and held water well had the greatest potential for the widest range of crops. The usefulness of the SIR as a soil quality index would be greatest if there was a statistically significant relationship between SIR values and an economic indicator of land value. Reganold and Singer (1984) found that area-weighted average SIR values between 60 and 100 for 744 fields in the San Joaquin Valley of California had lower but statistically insignificant input/output ratios than fields with indices < 60. The lack of statistical significance does not mean that better quality lands could not be farmed at economically lower cost or at higher cost and higher output than the lower quality lands. We productivity index model (PI) was developed to evaluate soil productivity in the top 100 cm, especially with reference to potential productivity loss due to soil erosion (Neill, 1979; Kiniry et al., 1983). The PI model rates soils on the sufficiency for root growth based on potential available water storage capacity, bulk density, aeration, pH, and electrical conductivity. A value from zero to one is assigned to each property describing the importance of that parameter for root development. The product of these five index values is used to describe the fractional sufficiency of any soil layer for root development. Pierce et al. (1983) modified the PI to include the assumption that nutrients were not limiting and that climate, management and plant differences are constant. A number of authors found that it is useful to various degrees (Gantzer and McCarty, 1987; Lindstrom et al., 1992). Parr et al. (1992) suggest that a SQI could take the form of Equation: SQI = f (SP, P, E, H, ER, BD, FQ, MI) where SQI is a function of soil properties (SP), potential productivity (P), environmental factors (E), human and animal health (H), erodibility (ER), biological diversity (BD), food quality and safety (FQ) and management inputs (MI). Determination of the specific measurable indicators of each variable and the interactions among these diverse variables is a daunting task. Moreover, the mathematical method of combining these factors, as well as the resulting value that would indicate a high quality soil, is not specified. The inclusion of variables BD, FQ and MI make this a land quality index as suggested by FAO (1997). Larson and Pierce (1991) defined soil quality (Q) as the state of existence of soil relative to a standard or in terms of a degree of excellence. They argue that defining Q in terms of productivity is too limiting and does not serve us well. Rather, Q is defined as the sum of individual soil qualities q. and expressed as Equation: Q=f(qi ...qn). These authors do not identify the best subset of properties or their functional and quantitative relationship, but do suggest that a MDS should be selected from those soil characteristics in which changes are measurable and relatively rapid (i.e., "dynamic" properties), arguing that it is more important to know about changes in soil quality (dQ) than the magnitude of Q (Larson and Pierce, 1991). Changes in soil quality are a function of changes in soil characteristics (q) over time (t): dQ = f[(qi.t - qit0 )... (qn.t-qnt0)]. If dQ/dt is ≥0, the soil or ecosystem is improving relative to the standard at time to. If dQ/dt <0, soil degradation is occurring. Time zero can be selected to meet management needs or goals. If there is a drastic change in management, time zero can be defined as prior to the change. If a longer time period of comparison is considered more appropriate, properties of an uncultivated or pristine soil could be used. The MDS recommended by Larson and Pierce (1991) includes N mineralization potential or P buffering capacity, total organic C, labile organic C, texture, plant-available water capacity, structure (bulk density is recommended as a surrogate variable), strength, maximum rooting depth, pH and EC. In instances when data are unavailable, pedotransfer functions (Bouma, 1989) can be used to estimate values of soil characteristics. These estimates can then be used as part of the minimum dataset to estimate soil quality or changes in soil quality brought about by management. Although this is a quantitative system, some qualitative judgments are needed to make decisions about changes in soil quality. In particular, interpretation of the meaning of magnitude of changes in a characteristic or the number of characteristics to change from time zero to the time of the measurement is qualitative. The authors do not address how large a change in pH, soil depth, bulk density or organic C represents serious soil degradation, or the values that define soil as high or low quality. Karlen et al. (1994) developed QI based on a 10-year crop residue management study. QI is based on four soil functions: (1) accommodating water entry, (2) retaining and supplying water to plants, (3) resisting degradation, and (4) supporting plant growth. Numerous properties were measured and values normalized based on standard scoring functions. One function is based on the concept that more of a property is better, one that less is better and the third that an optimum is better. Lower threshold values receive a score of zero, upper threshold values receive a score of one, and baseline values receive a score of one-half. Priorities are then assigned to each value. For example, aggregate stability was given the highest weight among factors important in water entry. After normalizing, each value is then multiplied by its weighting factor (wt) and products are summed Equation: QI=qwe (wt) + qwt (wt)+qrd (wt) + qspg (wt). Subscripts refer to the four main functions described earlier. It should also be noted that resisting degradation (rd) and sustaining plant growth (spg) are assigned secondary and tertiary levels of properties that themselves are normalized and weighted before a final value is calculated and incorporated into Equation. The resulting index resulted in values between zero and one. Of the three systems in the study, the one with the highest rate of organic matter return to the soil had the highest index value, and the soil with the lowest had the lowest value. The authors suggest that this demonstrates the usefulness of the index for monitoring the status and change in status of a soil as a function of management. They also suggest that the index and the soil characteristics that go into the index may change as the index is refined (Karlen et al. 1994). Snakin et al. (1996) developed an index of soil degradation that assigns three separate values from one to five reflecting the degree to which a soil's physical, chemical, and biological properties are degraded, as well as the rate of degradation. The Canadian soil capability classification system is similar to the older US systems and is quantitative. In a study in southwestern Ontario, Patterson and Mackintosh (1976) found that high gross returns per ha were three times as likely if the productivity index of land, based on the soil capability classification, was between 90 and 100 than if it fell between 80 and 89. Smith et al. (1993) and Halvorson et al. (1996) propose a multiple-variable indicator transform procedure to combine values or ranges of values that represent the best estimate of soil quality. Their system converts measured data values into a single value according to specified criteria. They do not attempt to define soil quality or specify what soil characteristics are to be used. They combine this procedure with kriging to develop maps that indicate the probabilities of meeting a soil quality criterion on a landscape level. Critical threshold values must be known, assumed, or determined in order to separate different soil qualities. Numerous additive productivity rating systems have been developed for specific states, as reviewed by Huddleston (1984). In these systems, soil properties are assigned numerical values according to their expected impact on plant growth. The index is usually calculated as the sum of the values assigned to each property with 100 the maximum value. Huddleston (1984) notes advantages and disadvantages to such a system which are similar to those for many of the soil quality indices previously discussed. Additive systems become complex as the number of factors, cropping systems, and soil and climatic conditions increases. A unique problem of subtractive systems (one in which 100 is the starting point and values are deducted for problem conditions) is that negative values result when multiple factors are less than satisfactory. Soil quality is a concept being developed to characterize the usefulness and health of soils, because soils are fundamental to the well-being and productivity of agricultural and natural ecosystems. It is a compound characteristic that cannot be directly measured. Many definitions of soil quality can be found in the literature and no set of soil characteristics has been universally adopted to quantify definitions. Soil quality is often equated with agricultural productivity and sustainability. An approach toward developing soil quality definitions is one that assesses soil quality in the context of a soil's potential to perform given functions in a system; e.g., maintains productivity, partitions and regulates water and solute flow through an ecosystem, serves as an environmental buffer, and cycles nutrients, water, and energy through the biosphere. Air and water quality standards are usually based on maximum allowable concentrations of materials hazardous to human health. A definition of soil quality based on this concept would encompass only a fraction of the important roles soils play in agriculture and the environment but could be essential to soil remediation. To proceed from a definition to a measure of soil quality, a minimum dataset of soil characteristics that represent soil quality must be selected and quantified. Many soil physical, chemical and biological properties have been suggested to separate soils of different quality. These include desirable and undesirable properties. Desirable soil characteristics may either be the presence of a property that benefits crop productivity and environmental buffering and/or other important soil functions, or the absence of a property that is detrimental to these functions. In particular, absence of contaminants is an important soil quality characteristic. In selecting characteristics, it is necessary to recognize that some soil properties are static, in the sense that they change slowly over time and others are dynamic. In addition, spatial and temporal variability of soil properties must be considered when selecting the properties used to assess soil quality. A single soil property is of limited use in evaluating soil quality. Qualitative and quantitative soil quality indices have been suggested that combine quantitative values of soil properties. Quantitative systems may be additive, multiplicative or more complex functions. Regardless of the definition or suite of soil variables chosen to define and quantify soil quality, it is critical to human welfare that soils be managed to provide for human health and well-being while minimizing soil and environmental degradation. References Anderson, D.W., E.G. Gregorich. 1984. Effect of soil erosion on soil quality and productivity. p. 105-113. In Soil erosion and degradation. Proc. 2nd Ann. Western Prov. Conf. Rational. Water Soil Res. Manag. Sask., Saskatoon, Canada. Andiscott, T.M. 1995. Entropy and sustainability. Europ. J. Soil Sci. 46:161-168. Arnold, R.W., I. Zaboles., V.C. Targulian (ed.). 1990. Global soil change. Report of an IIASA-ISSS-UNEP task force on the role of soil in global change. International Institute for Applied Systems Analysis, Laxanberg, Austria. Arshad, M-A., G.M. Coen. 1992. Characterization of soil quality: Physical and chemical criteria. Am. J. Altern. Agr. 725-3 I . Beck, A.J., S.C. Wilson., R.E. Alcock., K.C. Jones. 1995. Kinetic constraints on the loss of organic chemicals from contaminated soils: Implications for soil-quality limits. Critical Rev. Environ. Sci. Technol. 25:1-43. Beke, G.J., H.H. Janzen., T. Entz. 1994. Salinity and nutrient distribution in soil profiles of long-term crop rota-tions. Can. J. Soil Sci. 74:229-234. Berry, E.C. 1994. Earthworms and other fauna in the soil, p. 61-90. In J.L. Hatfield and B A. Stewart (ed.) Soil biology: effects on soil quality. Lewis Publishers, Boca Raton, FL. Biederbeck, V.O., C.A. Campbell., H.U. Krainetz., D. Curtain., O.T Bouman. 1996. Soil microbial and biochemical properties after ten years of fertilization with urea and anhydrous ammonia. Can. J. Soil Sci. 76:7-14. Boehn, M.M., D.W. Anderson. 1997. A landscape-scale study of soil quality in three prairie farming systems. Soil Sci. Soc. Am. J. 61:1147-1159. Bouma, J. 1989. Land qualities in space and time. p. 3-13. In J. Bouma and A.K. Bregt (ed.) Land qualities in space and time. Pudoc, Wageningen, Netherlands. Bouma, J., A.K. Bregt (ed.). 1989. Land qualities in space and time. Pudoc, Wageningen, Netherlands. Bowers, T.S., T.D. Gauhier. 1994. Use of the output of a lead risk assessment model to establish soil lead cleanup levels. Environ. Geochem. Health 16:191-196. Bowman, R.A., J.D. Reeder., G.E. Schuman. 1990. Evaluation of selected soil physical, chemical and biological parameters as indicators of soil productivity. Proc. Int. Conf. on Soil Quality in Semi-arid Ag. 2:64-70. Univ. of Saskatchewan, Saskatoon, Canada. Budd, W.W. 1992. What capacity the land? J. Soil Water Conserv. 47:28-31. Carter, MR., E.G. Gregorich., D.W Anderson., J.W. Doran., H.H. Janzen., F.J. Pierce. 1997. Concepts of soil quality and their significance: /n E.G. Gregorich and M. Carter (ed.) Soil quality for crop production and ecosys-tem health. Elsevier Science Publishers, Amsterdam, Netherlands. Cook, N., W.H. Hendershot. 1996. The problem of establishing ecologically based soil quality criteria: The case of lead. Can J. Soil Sci. 76:335-342. Cox, C. 1995. Soil quality: Goals for national policy. J. Soil Water Conserv. 50:223. Denneman, C.A.J., J.G. Robberse. 1990. Ecotoxicological risk assessment as a base for development of soil quality criteria. p. 157-164. In F Arendt, M. Hinsenveld and W.J. van den Brink (ed.) Contaminated soil '90. Proc. Intl. KfK/I'NO Conf. on Contaminated Soil, Karlsruhe, Germany, Kluwer Academic Publishers, Dordrecht, Neth-erlands. Dent, F.J. 1978. Land suitability classification. p. 273-293. In Soils and rice. International Ri