Kepler Transit Depths Contaminated By a Phantom Star

NASA Astrophysics Data System (ADS)

Dalba, Paul A.; Muirhead, Philip S.; Croll, Bryce; Kempton, Eliza M.-R.

2017-02-01

We present ground-based observations from the Discovery Channel Telescope (DCT) of three transits of Kepler-445c—a supposed super-Earth exoplanet with properties resembling GJ 1214b—and demonstrate that the transit depth is ˜50% shallower than the depth previously inferred from Kepler spacecraft data. The resulting decrease in planetary radius significantly alters the interpretation of the exoplanet’s bulk composition. Despite the faintness of the M4 dwarf host star, our ground-based photometry clearly recovers each transit and achieves repeatable 1σ precision of ˜0.2% (2 millimags). The transit parameters estimated from the DCT data are discrepant with those inferred from the Kepler data to at least 17σ confidence. This inconsistency is due to a subtle miscalculation of the stellar crowding metric during the Kepler pre-search data conditioning (PDC). The crowding metric, or CROWDSAP, is contaminated by a non-existent phantom star originating in the USNO-B1 catalog and inherited by the Kepler Input Catalog (KIC). Phantom stars in the KIC are likely rare, but they have the potential to affect statistical studies of Kepler targets that use the PDC transit depths for a large number of exoplanets where an individual follow-up observation of each is not possible. The miscalculation of Kepler-445c’s transit depth emphasizes the importance of stellar crowding in the Kepler data, and provides a cautionary tale for the analysis of data from the Transiting Exoplanet Survey Satellite, which will have even larger pixels than Kepler.

VizieR Online Data Catalog: Kepler pipeline transit signal recovery. III. (Christiansen+, 2016)

NASA Astrophysics Data System (ADS)

Christiansen, J. L.; Clarke, B. D.; Burke, C. J.; Jenkins, J. M.; Bryson, S. T.; Coughlin, J. L.; Mullally, F.; Thompson, S. E.; Twicken, J. D.; Batalha, N. M.; Haas, M. R.; Catanzarite, J.; Campbell, J. R.; Uddin, A. K.; Zamudio, K.; Smith, J. C.; Henze, C. E.

2018-03-01

Here we describe the third transit injection experiment, which tests the entire Kepler observing baseline (Q1-Q17) for the first time across all 84 CCD channels. It was performed to measure the sensitivity of the Kepler pipeline used to generate the Q1-Q17 Data Release 24 (DR24) catalog of Kepler Objects of Interest (Coughlin et al. 2016, J/ApJS/224/12) available at the NASA Exoplanet Archive (Akeson et al. 2013PASP..125..989A). The average detection efficiency describes the likelihood that the Kepler pipeline would successfully recover a given transit signal. To measure this property we perform a Monte Carlo experiment where we inject the signatures of simulated transiting planets around 198154 target stars, one per star, across the focal plane starting with the Q1-Q17 DR24 calibrated pixels. The simulated transits are generated using the Mandel & Agol (2002ApJ...580L.171M) model. Of the injections, 159013 resulted in three or more injected transits (the minimum required for detection by the pipeline) and were used for the subsequent analysis. (1 data file).

The K2 Ecliptic Plane Input Catalog (EPIC) and Stellar Classifications of 138,600 Targets in Campaigns 1-8

NASA Astrophysics Data System (ADS)

Huber, Daniel; Bryson, Stephen T.; Haas, Michael R.; Barclay, Thomas; Barentsen, Geert; Howell, Steve B.; Sharma, Sanjib; Stello, Dennis; Thompson, Susan E.

2016-05-01

The K2 Mission uses the Kepler spacecraft to obtain high-precision photometry over ≈80 day campaigns in the ecliptic plane. The Ecliptic Plane Input Catalog (EPIC) provides coordinates, photometry, and kinematics based on a federation of all-sky catalogs to support target selection and target management for the K2 mission. We describe the construction of the EPIC, as well as modifications and shortcomings of the catalog. Kepler magnitudes (Kp) are shown to be accurate to ≈0.1 mag for the Kepler field, and the EPIC is typically complete to Kp ≈ 17 (Kp ≈ 19 for campaigns covered by Sloan Digital Sky Survey). We furthermore classify 138,600 targets in Campaigns 1-8 (≈88% of the full target sample) using colors, proper motions, spectroscopy, parallaxes, and galactic population synthesis models, with typical uncertainties for G-type stars of ≈3% in {T}{{eff}}, ≈0.3 dex in {log} g, ≈40% in radius, ≈10% in mass, and ≈40% in distance. Our results show that stars targeted by K2 are dominated by K-M dwarfs (≈41% of all selected targets), F-G dwarfs (≈36%), and K giants (≈21%), consistent with key K2 science programs to search for transiting exoplanets and galactic archeology studies using oscillating red giants. However, we find significant variation of the fraction of cool dwarfs with galactic latitude, indicating a target selection bias due to interstellar reddening and increased contamination by giant stars near the galactic plane. We discuss possible systematic errors in the derived stellar properties, and differences with published classifications for K2 exoplanet host stars. The EPIC is hosted at the Mikulski Archive for Space Telescopes (MAST): http://archive.stsci.edu/k2/epic/search.php.

Initial Data Release of the Kepler-INT Survey

NASA Astrophysics Data System (ADS)

Greiss, S.; Steeghs, D.; Gänsicke, B. T.; Martín, E. L.; Groot, P. J.; Irwin, M. J.; González-Solares, E.; Greimel, R.; Knigge, C.; Østensen, R. H.; Verbeek, K.; Drew, J. E.; Drake, J.; Jonker, P. G.; Ripepi, V.; Scaringi, S.; Southworth, J.; Still, M.; Wright, N. J.; Farnhill, H.; van Haaften, L. M.; Shah, S.

2012-07-01

This paper describes the first data release of the Kepler-INT Survey (KIS) that covers a 116 deg2 region of the Cygnus and Lyra constellations. The Kepler field is the target of the most intensive search for transiting planets to date. Despite the fact that the Kepler mission provides superior time-series photometry, with an enormous impact on all areas of stellar variability, its field lacks optical photometry complete to the confusion limit of the Kepler instrument necessary for selecting various classes of targets. For this reason, we follow the observing strategy and data reduction method used in the IPHAS and UVEX galactic plane surveys in order to produce a deep optical survey of the Kepler field. This initial release concerns data taken between 2011 May and August, using the Isaac Newton Telescope on the island of La Palma. Four broadband filters were used, U, g, r, i, as well as one narrowband one, Hα, reaching down to a 10σ limit of ~20th mag in the Vega system. Observations covering ~50 deg2, thus about half of the field, passed our quality control thresholds and constitute this first data release. We derive a global photometric calibration by placing the KIS magnitudes as close as possible to the Kepler Input Catalog (KIC) photometry. The initial data release catalog containing around 6 million sources from all the good photometric fields is available for download from the KIS Web site (www.astro.warwick.ac.uk/research/kis/) as well as via MAST (KIS magnitudes can be retrieved using the MAST enhanced target search page http://archive.stsci.edu/kepler/kepler_fov/search.php and also via Casjobs at MAST Web site http://mastweb.stsci.edu/kplrcasjobs/).

INITIAL DATA RELEASE OF THE KEPLER-INT SURVEY

DOE Office of Scientific and Technical Information (OSTI.GOV)

Greiss, S.; Steeghs, D.; Gaensicke, B. T.

2012-07-15

This paper describes the first data release of the Kepler-INT Survey (KIS) that covers a 116 deg{sup 2} region of the Cygnus and Lyra constellations. The Kepler field is the target of the most intensive search for transiting planets to date. Despite the fact that the Kepler mission provides superior time-series photometry, with an enormous impact on all areas of stellar variability, its field lacks optical photometry complete to the confusion limit of the Kepler instrument necessary for selecting various classes of targets. For this reason, we follow the observing strategy and data reduction method used in the IPHAS andmore » UVEX galactic plane surveys in order to produce a deep optical survey of the Kepler field. This initial release concerns data taken between 2011 May and August, using the Isaac Newton Telescope on the island of La Palma. Four broadband filters were used, U, g, r, i, as well as one narrowband one, H{alpha}, reaching down to a 10{sigma} limit of {approx}20th mag in the Vega system. Observations covering {approx}50 deg{sup 2}, thus about half of the field, passed our quality control thresholds and constitute this first data release. We derive a global photometric calibration by placing the KIS magnitudes as close as possible to the Kepler Input Catalog (KIC) photometry. The initial data release catalog containing around 6 million sources from all the good photometric fields is available for download from the KIS Web site (www.astro.warwick.ac.uk/research/kis/) as well as via MAST (KIS magnitudes can be retrieved using the MAST enhanced target search page http://archive.stsci.edu/kepler/kepler{sub f}ov/search.php and also via Casjobs at MAST Web site http://mastweb.stsci.edu/kplrcasjobs/).« less

VizieR Online Data Catalog: 106 Kepler ultra-short-period planets (Sanchis-Ojeda+, 2014)

NASA Astrophysics Data System (ADS)

Sanchis-Ojeda, R.; Rappaport, S.; Winn, J. N.; Kotson, M. C.; Levine, A.; El Mellah, I.

2017-06-01

To carry out an independent search for the shortest-period planets, we used the Kepler long-cadence time-series photometric data (30 minute samples) obtained between quarters 0 and 16. A list was prepared of all ~200000 target stars for which photometry is available for at least one quarter, and the version 5.0 FITS files, which were available for all quarters, were downloaded from the STScI MAST Web site. For estimates of basic stellar properties including not only radii, but also masses and effective temperatures, we relied on the catalog of Huber et al. (2014, J/ApJS/211/2). This catalog is based on a compilation of photospheric properties derived from many different sources. Although it is not a homogeneous catalog, it likely provides the most accurate stellar parameters that are currently available. (1 data file).

Finding Optimal Apertures in Kepler Data

NASA Astrophysics Data System (ADS)

Smith, Jeffrey C.; Morris, Robert L.; Jenkins, Jon M.; Bryson, Stephen T.; Caldwell, Douglas A.; Girouard, Forrest R.

2016-12-01

With the loss of two spacecraft reaction wheels precluding further data collection for the Kepler primary mission, even greater pressure is placed on the processing pipeline to eke out every last transit signal in the data. To that end, we have developed a new method to optimize the Kepler Simple Aperture Photometry (SAP) photometric apertures for both planet detection and minimization of systematic effects. The approach uses a per cadence modeling of the raw pixel data and then performs an aperture optimization based on signal-to-noise ratio and the Kepler Combined Differential Photometric Precision (CDPP), which is a measure of the noise over the duration of a reference transit signal. We have found the new apertures to be superior to the previous Kepler apertures. We can now also find a per cadence flux fraction in aperture and crowding metric. The new approach has also been proven to be robust at finding apertures in K2 data that help mitigate the larger motion-induced systematics in the photometry. The method further allows us to identify errors in the Kepler and K2 input catalogs.

Planetary Candidates Observed by Kepler. VIII. A Fully Automated Catalog with Measured Completeness and Reliability Based on Data Release 25

NASA Astrophysics Data System (ADS)

Thompson, Susan E.; Coughlin, Jeffrey L.; Hoffman, Kelsey; Mullally, Fergal; Christiansen, Jessie L.; Burke, Christopher J.; Bryson, Steve; Batalha, Natalie; Haas, Michael R.; Catanzarite, Joseph; Rowe, Jason F.; Barentsen, Geert; Caldwell, Douglas A.; Clarke, Bruce D.; Jenkins, Jon M.; Li, Jie; Latham, David W.; Lissauer, Jack J.; Mathur, Savita; Morris, Robert L.; Seader, Shawn E.; Smith, Jeffrey C.; Klaus, Todd C.; Twicken, Joseph D.; Van Cleve, Jeffrey E.; Wohler, Bill; Akeson, Rachel; Ciardi, David R.; Cochran, William D.; Henze, Christopher E.; Howell, Steve B.; Huber, Daniel; Prša, Andrej; Ramírez, Solange V.; Morton, Timothy D.; Barclay, Thomas; Campbell, Jennifer R.; Chaplin, William J.; Charbonneau, David; Christensen-Dalsgaard, Jørgen; Dotson, Jessie L.; Doyle, Laurance; Dunham, Edward W.; Dupree, Andrea K.; Ford, Eric B.; Geary, John C.; Girouard, Forrest R.; Isaacson, Howard; Kjeldsen, Hans; Quintana, Elisa V.; Ragozzine, Darin; Shabram, Megan; Shporer, Avi; Silva Aguirre, Victor; Steffen, Jason H.; Still, Martin; Tenenbaum, Peter; Welsh, William F.; Wolfgang, Angie; Zamudio, Khadeejah A.; Koch, David G.; Borucki, William J.

2018-04-01

We present the Kepler Object of Interest (KOI) catalog of transiting exoplanets based on searching 4 yr of Kepler time series photometry (Data Release 25, Q1–Q17). The catalog contains 8054 KOIs, of which 4034 are planet candidates with periods between 0.25 and 632 days. Of these candidates, 219 are new, including two in multiplanet systems (KOI-82.06 and KOI-2926.05) and 10 high-reliability, terrestrial-size, habitable zone candidates. This catalog was created using a tool called the Robovetter, which automatically vets the DR25 threshold crossing events (TCEs). The Robovetter also vetted simulated data sets and measured how well it was able to separate TCEs caused by noise from those caused by low signal-to-noise transits. We discuss the Robovetter and the metrics it uses to sort TCEs. For orbital periods less than 100 days the Robovetter completeness (the fraction of simulated transits that are determined to be planet candidates) across all observed stars is greater than 85%. For the same period range, the catalog reliability (the fraction of candidates that are not due to instrumental or stellar noise) is greater than 98%. However, for low signal-to-noise candidates between 200 and 500 days around FGK-dwarf stars, the Robovetter is 76.7% complete and the catalog is 50.5% reliable. The KOI catalog, the transit fits, and all of the simulated data used to characterize this catalog are available at the NASA Exoplanet Archive.

Kepler Planet Reliability Metrics: Astrophysical Positional Probabilities for Data Release 25

NASA Technical Reports Server (NTRS)

Bryson, Stephen T.; Morton, Timothy D.

2017-01-01

This document is very similar to KSCI-19092-003, Planet Reliability Metrics: Astrophysical Positional Probabilities, which describes the previous release of the astrophysical positional probabilities for Data Release 24. The important changes for Data Release 25 are:1. The computation of the astrophysical positional probabilities uses the Data Release 25 processed pixel data for all Kepler Objects of Interest.2. Computed probabilities now have associated uncertainties, whose computation is described in x4.1.3.3. The scene modeling described in x4.1.2 uses background stars detected via ground-based high-resolution imaging, described in x5.1, that are not in the Kepler Input Catalog or UKIRT catalog. These newly detected stars are presented in Appendix B. Otherwise the text describing the algorithms and examples is largely unchanged from KSCI-19092-003.

Inferring Planet Occurrence Rates With a Q1-Q17 Kepler Planet Candidate Catalog Produced by a Machine Learning Classifier

NASA Astrophysics Data System (ADS)

Catanzarite, Joseph; Jenkins, Jon Michael; McCauliff, Sean D.; Burke, Christopher; Bryson, Steve; Batalha, Natalie; Coughlin, Jeffrey; Rowe, Jason; mullally, fergal; thompson, susan; Seader, Shawn; Twicken, Joseph; Li, Jie; morris, robert; smith, jeffrey; haas, michael; christiansen, jessie; Clarke, Bruce

2015-08-01

NASA’s Kepler Space Telescope monitored the photometric variations of over 170,000 stars, at half-hour cadence, over its four-year prime mission. The Kepler pipeline calibrates the pixels of the target apertures for each star, produces light curves with simple aperture photometry, corrects for systematic error, and detects threshold-crossing events (TCEs) that may be due to transiting planets. The pipeline estimates planet parameters for all TCEs and computes diagnostics used by the Threshold Crossing Event Review Team (TCERT) to produce a catalog of objects that are deemed either likely transiting planet candidates or false positives.We created a training set from the Q1-Q12 and Q1-Q16 TCERT catalogs and an ensemble of synthetic transiting planets that were injected at the pixel level into all 17 quarters of data, and used it to train a random forest classifier. The classifier uniformly and consistently applies diagnostics developed by the Transiting Planet Search and Data Validation pipeline components and by TCERT to produce a robust catalog of planet candidates.The characteristics of the planet candidates detected by Kepler (planet radius and period) do not reflect the intrinsic planet population. Detection efficiency is a function of SNR, so the set of detected planet candidates is incomplete. Transit detection preferentially finds close-in planets with nearly edge-on orbits and misses planets whose orbital geometry precludes transits. Reliability of the planet candidates must also be considered, as they may be false positives. Errors in detected planet radius and in assumed star properties can also bias inference of intrinsic planet population characteristics.In this work we infer the intrinsic planet population, starting with the catalog of detected planet candidates produced by our random forest classifier, and accounting for detection biases and reliabilities as well as for radius errors in the detected population.Kepler was selected as the 10th mission

The Kepler Follow-up Observation Program. I. A Catalog of Companions to Kepler Stars from High-Resolution Imaging

NASA Astrophysics Data System (ADS)

Furlan, E.; Ciardi, D. R.; Everett, M. E.; Saylors, M.; Teske, J. K.; Horch, E. P.; Howell, S. B.; van Belle, G. T.; Hirsch, L. A.; Gautier, T. N., III; Adams, E. R.; Barrado, D.; Cartier, K. M. S.; Dressing, C. D.; Dupree, A. K.; Gilliland, R. L.; Lillo-Box, J.; Lucas, P. W.; Wang, J.

2017-02-01

We present results from high-resolution, optical to near-IR imaging of host stars of Kepler Objects of Interest (KOIs), identified in the original Kepler field. Part of the data were obtained under the Kepler imaging follow-up observation program over six years (2009-2015). Almost 90% of stars that are hosts to planet candidates or confirmed planets were observed. We combine measurements of companions to KOI host stars from different bands to create a comprehensive catalog of projected separations, position angles, and magnitude differences for all detected companion stars (some of which may not be bound). Our compilation includes 2297 companions around 1903 primary stars. From high-resolution imaging, we find that ˜10% (˜30%) of the observed stars have at least one companion detected within 1″ (4″). The true fraction of systems with close (≲4″) companions is larger than the observed one due to the limited sensitivities of the imaging data. We derive correction factors for planet radii caused by the dilution of the transit depth: assuming that planets orbit the primary stars or the brightest companion stars, the average correction factors are 1.06 and 3.09, respectively. The true effect of transit dilution lies in between these two cases and varies with each system. Applying these factors to planet radii decreases the number of KOI planets with radii smaller than 2 {R}\\oplus by ˜2%-23% and thus affects planet occurrence rates. This effect will also be important for the yield of small planets from future transit missions such as TESS.

VizieR Online Data Catalog: Catalog of Kepler flare stars (Van Doorsselaere+, 2017)

NASA Astrophysics Data System (ADS)

van Doorsselaere, T.; Shariati, H.; Debosscher, J.

2017-11-01

With an automated detection method, we have identified stellar flares in the long cadence observations of Kepler during quarter 15. We list each flare time for the respective Kepler objects. Furthermore, we list the flare amplitude and decay time after fitting the flare light curve with an exponential decay. Flare start times in long cadence data of Kepler during quarter 15. (1 data file).

PROBING THE DEEP END OF THE MILKY WAY WITH KEPLER : ASTEROSEISMIC ANALYSIS OF 854 FAINT RED GIANTS MISCLASSIFIED AS COOL DWARFS

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mathur, S.; García, R. A.; Beck, P. G.

Asteroseismology has proven to be an excellent tool to determine not only global stellar properties with good precision, but also to infer the stellar structure, dynamics, and evolution for a large sample of Kepler stars. Prior to the launch of the mission, the properties of Kepler targets were inferred from broadband photometry, leading to the Kepler Input Catalog (KIC). The KIC was later revised in the Kepler Star Properties Catalog, based on literature values and an asteroseismic analysis of stars that were unclassified in the KIC. Here, we present an asteroseismic analysis of 45,400 stars that were classified as dwarfsmore » in the Kepler Star Properties Catalog. We found that around 2% of the sample shows acoustic modes in the typical frequency range that put them in the red-giant category rather than the cool dwarf category. We analyze the asteroseismic properties of these stars, derive their surface gravities, masses, and radii, and present updated effective temperatures and distances. We show that the sample is significantly fainter than the previously known oscillating giants in the Kepler field, with the faintest stars reaching down to a Kepler magnitude of Kp ∼ 16. We demonstrate that 404 stars are at distances beyond 5 kpc and that the stars are significantly less massive than for the original Kepler red-giant sample, consistent with a population of distant halo giants. A comparison with a galactic population model shows that up to 40 stars might be genuine halo giants, which would increase the number of known asteroseismic halo stars by a factor of 4. The detections presented here will provide a valuable sample for galactic archeology studies.« less

VizieR Online Data Catalog: Solar analogs and twins rotation by Kepler (do Nascimento+, 2014)

NASA Astrophysics Data System (ADS)

Do Nascimento, J.-D. Jr; Garcia, R. A.; Mathur, S.; Anthony, F.; Barnes, S. A.; Meibom, S.; da Costa, J. S.; Castro, M.; Salabert, D.; Ceillier, T.

2017-03-01

Our sample of 75 stars consists of a seismic sample of 38 from Chaplin et al. (2014, J/ApJS/210/1), 35 additional stars selected from the Kepler Input Catalog (KIC), and 16 Cyg A and B. We selected 38 well-studied stars from the asteroseismic data with fundamental properties, including ages, estimated by Chaplin et al. (2014, J/ApJS/210/1), and with Teff and log g as close as possible to the Sun's value (5200 K < Teff < 6060 K and 3.63 < log g < 4.40). This seismic sample allows a direct comparison between gyro- and seismic-ages for a subset of eight stars. These seismic samples were observed in short cadence for one month each in survey mode. Stellar properties for these stars have been estimated using two global asteroseismic parameters and complementary photometric and spectroscopic observations as described by Chaplin et al. (2014, J/ApJS/210/1). The median final quoted uncertainties for the full Chaplin et al. (2014, J/ApJS/210/1) sample were approximately 0.020 dex in log g and 150 K in Teff. (1 data file).

Kepler: A Search for Terrestrial Planets. K2 Handbook

NASA Technical Reports Server (NTRS)

Van Cleve, Jeffrey; Bryson, Steve

2017-01-01

The Kepler spacecraft was repurposed for the K2 mission a year after the failure of the second of Kepler's four reaction wheels in 2013 May. The purpose of this document, the K2 Handbook (K2H), is to describe features of K2 operations, performance, data analysis, and archive products which are common to most K2 campaigns, but different in degree or kind from the corresponding features of the Kepler mission.The K2 Handbook is meant to be read with the following companion documents, which are all publicly available:1. Kepler Instrument Handbook (KSCI-19033) provides information about the design, performance and operational constraints of the instrument and an overview of the types of pixel data that are available.2. Kepler Data Processing Handbook (KSCI-19081) describes how pixels downloaded from the spacecraft are converted by the Kepler Data Processing Pipeline into the data products available at the MAST archive3. Kepler Archive Manual (KDMC-100008) describes the format and content of the data products and how to search for them.4. Kepler Data Characteristics Handbook (KSCI-19040) describes recurring non-astrophysical features of the Kepler data due to instrument signatures, spacecraft events or solar activity and explains how these characteristics are handled by the Kepler pipeline.5. The Ecliptic Plane Input Catalog describes the provenance of the positions and Kepler magnitudes used for target management and aperature photometry.6. K2 Data Release Notes (DRN) are on-line documents available on the K2 science website which describe the data inventory, instrumental signatures and events peculiar to individual observing campaigns.

VizieR Online Data Catalog: Fundamental parameters of Kepler stars (Silva Aguirre+, 2015)

NASA Astrophysics Data System (ADS)

Silva Aguirre, V.; Davies, G. R.; Basu, S.; Christensen-Dalsgaard, J.; Creevey, O.; Metcalfe, T. S.; Bedding, T. R.; Casagrande, L.; Handberg, R.; Lund, M. N.; Nissen, P. E.; Chaplin, W. J.; Huber, D.; Serenelli, A. M.; Stello, D.; van Eylen, V.; Campante, T. L.; Elsworth, Y.; Gilliland, R. L.; Hekker, S.; Karoff, C.; Kawaler, S. D.; Kjeldsen, H.; Lundkvist, M. S.

2016-02-01

Our sample has been extracted from the 77 exoplanet host stars presented in Huber et al. (2013, Cat. J/ApJ/767/127). We have made use of the full time-base of observations from the Kepler satellite to uniformly determine precise fundamental stellar parameters, including ages, for a sample of exoplanet host stars where high-quality asteroseismic data were available. We devised a Bayesian procedure flexible in its input and applied it to different grids of models to study systematics from input physics and extract statistically robust properties for all stars. (4 data files).

Transit Timing Observations from Kepler. IX. Catalog of the Full Long-cadence Data Set

NASA Astrophysics Data System (ADS)

Holczer, Tomer; Mazeh, Tsevi; Nachmani, Gil; Jontof-Hutter, Daniel; Ford, Eric B.; Fabrycky, Daniel; Ragozzine, Darin; Kane, Mackenzie; Steffen, Jason H.

2016-07-01

We present a new transit timing catalog of 2599 Kepler Objects of Interest (KOIs), using the PDC-MAP long-cadence light curves that include the full 17 quarters of the mission (ftp://wise-ftp.tau.ac.il/pub/tauttv/TTV/ver_112). The goal is to produce an easy-to-use catalog that can stimulate further analyses of interesting systems. For 779 KOIs with high enough S/N, we derived the timing, duration, and depth of 69,914 transits. For 1820 KOIs with lower SNR, we derived only the timing of 225,273 transits. After removal of outlier timings, we derived various statistics for each KOI that were used to indicate significant variations. Including systems found by previous works, we have detected 260 KOIs that showed significant TTVs with long-term variations (>100 days), and another 14 KOIs with periodic modulations shorter than 100 days and small amplitudes. For five of those, the periodicity is probably due to the crossing of rotating stellar spots by the transiting planets.

Kepler-90 system (Artist's Concept)

NASA Image and Video Library

2017-12-14

Our solar system now is tied for most number of planets around a single star, with the recent discovery of an eighth planet circling Kepler-90, a Sun-like star 2,545 light years from Earth. The planet was discovered in data from NASA's Kepler Space Telescope. The newly-discovered Kepler-90i -- a sizzling hot, rocky planet that orbits its star once every 14.4 days -- was found using machine learning from Google. Machine learning is an approach to artificial intelligence in which computers "learn." In this case, computers learned to identify planets by finding in Kepler data instances where the telescope recorded changes in starlight caused by planets beyond our solar system, known as exoplanets. https://photojournal.jpl.nasa.gov/catalog/PIA22192

Target Characterization and Follow-Up Observations in Support of the Kepler Mission

NASA Technical Reports Server (NTRS)

Latham, David W.

2003-01-01

A variety of experiments were carried out to investigate the number and characteristics of the stars to be included in the Kepler Input Catalog. One result of this work was the proposal that the 2MASS Catalog of astrometry and photometry in the infrared be used as the primary source for the initial selection of candidate target stars, because this would naturally decrease the number of unsuitable hot blue stars and would also increase the number of desirable solar-type dwarf stars. Another advantage of the 2MASS catalogue is that the stellar positions have more than adequate astrometric accuracy for the Kepler target selection. The original plan reported in the Concept Study Report was to use the parallaxes and multi-band photometry from the FAME mission to provide the information needed for reliable separation of giants and dwarfs. As a result of NASA's withdrawal of support for FAME an alternate approach was needed. In November 2002 we proposed to the Kepler Science Team that a ground-based multi-band photometric survey could help alleviate the loss of the FAME data. The Science Team supported this proposal strongly, and we undertook a survey of possible facilities for such a survey. We concluded that the SAO's 4Shooter CCD camera on the 1.2-m telescope at the Whipple Observatory on Mount Hopkins, Arizona, showed promise for this work.

The quality of photometric information in the Hipparcos Input Catalog

NASA Technical Reports Server (NTRS)

Casertano, Stefano; Bell, David J.; Ratnatunga, Kavan U.; Yoss, Kenneth M.

1993-01-01

Comparison with independent photoelectric photometry is used to assess the quality of magnitudes and colors in the Hipparcos Input Catalog. These magnitudes and colors will play an important role in the luminosity calibration of Hipparcos stars. We conclude that photoelectric photometry, available for about 37 percent of the catalog, is of uniformly good quality, and the error estimates in the Catalog are very accurate. On the other hand, colors determined from poor spectral classes suffer from very significant errors, also correctly estimated in the Catalog, which make them essentially unsuited for the purpose of luminosity calibration. Only stars with either photoelectric colors or good 2D spectral classes can be used in a high-accuracy luminosity calibration.

VizieR Online Data Catalog: Detection of 715 Kepler planet candidates host stars (Law+, 2014)

NASA Astrophysics Data System (ADS)

Law, N. M.; Morton, T.; Baranec, C.; Riddle, R.; Ravichandran, G.; Ziegler, C.; Johnson, J. A.; Tendulkar, S. P.; Bui, K.; Burse, M. P.; Das, H. K.; Dekany, R. G.; Kulkarni, S.; Punnadi, S.; Ramaprakash, A. N.

2017-03-01

We selected targets from the KOIs catalog based on a Q1-Q6 Kepler data search (Batalha et al. 2013, J/ApJS/204/24). Our initial targets were selected randomly from the Q1-Q6 KOIs, requiring only that the targets are brighter than mi = 16.0, a restriction which removed only 2% of the KOIs. While it is our intent to observe every KOI with Robo-AO, this initial target selection provides a wide coverage of the range of KOI properties. Given Robo-AO's low time overheads, we took the time to re-observe KOIs which already had detected companions, to produce a complete and homogenous survey. We obtained high-angular-resolution images of the 715 Kepler targeted planet candidate host stars in summer 2012. We performed all the observations in a queue-scheduled mode with the Robo-AO laser adaptive optics system (Baranec et al. 2012SPIE.8447E..04B; 2013, J. Visualized Exp., 72, e50021; Riddle et al. 2012SPIE.8447E..2OR) mounted on the robotic Palomar 60 inch telescope (Cenko et al. 2006PASP..118.1396C). (4 data files).

NASA's Kepler Reveals Potential New Worlds - Raw Video New File

NASA Image and Video Library

2017-06-19

This is a video file, or a collection of unedited video clips for media usage, in support of the Kepler mission's latest discovery announcement. Launched in 2009, the Kepler space telescope is our first mission capable of identifying Earth-size planets around other stars. On Monday, June 19, 2017, scientists announced the results from the latest Kepler candidate catalog of the mission at a press conference at NASA's Ames Research Center.

The First APOKASC Catalog of Kepler Dwarf and Subgiant Stars

NASA Astrophysics Data System (ADS)

Serenelli, Aldo; Johnson, Jennifer; Huber, Daniel; Pinsonneault, Marc; Ball, Warrick H.; Tayar, Jamie; Silva Aguirre, Victor; Basu, Sarbani; Troup, Nicholas; Hekker, Saskia; Kallinger, Thomas; Stello, Dennis; Davies, Guy R.; Lund, Mikkel N.; Mathur, Savita; Mosser, Benoit; Stassun, Keivan G.; Chaplin, William J.; Elsworth, Yvonne; García, Rafael A.; Handberg, Rasmus; Holtzman, Jon; Hearty, Fred; García-Hernández, D. A.; Gaulme, Patrick; Zamora, Olga

2017-12-01

We present the first APOKASC catalog of spectroscopic and asteroseismic data for dwarfs and subgiants. Asteroseismic data for our sample of 415 objects have been obtained by the Kepler mission in short (58.5 s) cadence, and light curves span from 30 up to more than 1000 days. The spectroscopic parameters are based on spectra taken as part of the Apache Point Observatory Galactic Evolution Experiment and correspond to Data Release 13 of the Sloan Digital Sky Survey. We analyze our data using two independent {T}{eff} scales, the spectroscopic values from DR13 and those derived from SDSS griz photometry. We use the differences in our results arising from these choices as a test of systematic temperature uncertainties and find that they can lead to significant differences in the derived stellar properties. Determinations of surface gravity ({log}g), mean density (< ρ > ), radius (R), mass (M), and age (τ) for the whole sample have been carried out by means of (stellar) grid-based modeling. We have thoroughly assessed random and systematic error sources in the spectroscopic and asteroseismic data, as well as in the grid-based modeling determination of the stellar quantities provided in the catalog. We provide stellar properties determined for each of the two {T}{eff} scales. The median combined (random and systematic) uncertainties are 2% (0.01 dex; {log}g), 3.4% (< ρ > ), 2.6% (R), 5.1% (M), and 19% (τ) for the photometric {T}{eff} scale and 2% ({log}g), 3.5% (< ρ > ), 2.7% (R), 6.3% (M), and 23% (τ) for the spectroscopic scale. We present comparisons with stellar quantities in the asteroseismic catalog by Chaplin et al. that highlight the importance of having metallicity measurements for determining stellar parameters accurately. Finally, we compare our results with those coming from a variety of sources, including stellar radii determined from TGAS parallaxes and asteroseismic analyses based on individual frequencies. We find a very good agreement for all

A Catalog of Cool Dwarf Targets for the Transiting Exoplanet Survey Satellite

NASA Astrophysics Data System (ADS)

Muirhead, Philip S.; Dressing, Courtney D.; Mann, Andrew W.; Rojas-Ayala, Bárbara; Lépine, Sébastien; Paegert, Martin; De Lee, Nathan; Oelkers, Ryan

2018-04-01

We present a catalog of cool dwarf targets (V-J> 2.7, T eff ≲ 4000 K) and their stellar properties for the upcoming Transiting Exoplanet Survey Satellite (TESS), for the purpose of determining which cool dwarfs should be observed using two minute observations. TESS has the opportunity to search tens of thousands of nearby, cool, late K- and M-type dwarfs for transiting exoplanets, an order of magnitude more than current or previous transiting exoplanet surveys, such as Kepler, K2, and ground-based programs. This necessitates a new approach to choosing cool dwarf targets. Cool dwarfs are chosen by collating parallax and proper motion catalogs from the literature and subjecting them to a variety of selection criteria. We calculate stellar parameters and TESS magnitudes using the best possible relations from the literature while maintaining uniformity of methods for the sake of reproducibility. We estimate the expected planet yield from TESS observations using statistical results from the Kepler mission, and use these results to choose the best targets for two minute observations, optimizing for small planets for which masses can conceivably be measured using follow-up Doppler spectroscopy by current and future Doppler spectrometers. The catalog is available in machine readable format and is incorporated into the TESS Input Catalog and TESS Candidate Target List until a more complete and accurate cool dwarf catalog identified by ESA’s Gaia mission can be incorporated.

VizieR Online Data Catalog: APOKASC catalog of KIC dwarfs and subgiants (Serenelli+, 2017)

NASA Astrophysics Data System (ADS)

Serenelli, A.; Johnson, J.; Huber, D.; Pinsonneault, M.; Ball, W. H.; Tayar, J.; Aguirre, V. S.; Basu, S.; Troup, N.; Hekker, S.; Kallinger, T.; Stello, D.; Davies, G. R.; Lund, M. N.; Mathur, S.; Mosser, B.; Stassun, K. G.; Chaplin, W. J.; Elsworth, Y.; Garcia, R. A.; Handberg, R.; Holtzman, J.; Hearty, F.; Garcia-Hernandez, D. A.; Gaulme, P.; Zamora, O.

2018-02-01

The catalog consists of stars with detected solar-like oscillations in Kepler short-cadence data as reported in Chaplin+ (2011Sci...332..213C) and with spectroscopic observations from the APOGEE-1 survey (Majewski+ 2017AJ....154...94M). APOGEE spectra cover the H band, between 1.51 and 1.7um, at a resolution R=22500. This work extends the first APOKASC red giants catalog presented in Pinsonneault+ (2014, J/ApJS/215/19) to include 415 dwarf and subgiant stars. It is based on global seismic parameters Δν and νmax obtained from Kepler short-cadence asteroseismic data with length of light curves spanning from 30 up to 1055 days. (3 data files).

Kepler-Daten von BR Cyg

NASA Astrophysics Data System (ADS)

Pagel, Lienhard

2015-01-01

In the Kepler field is the eclipsing binary BR Cyg. He is a BAV program star. In the KIC (Kepler Input Catalogue) he is associated with the identifier kplr009899416 [1]. There have been determined 1084 minima and as many secondary minima. Acknowledgement: This paper makes use of data from the Kepler exoplanetarchive.

VizieR Online Data Catalog: de Houtman, Kepler and Halley star catalogs (Verbunt+ 2011)

NASA Astrophysics Data System (ADS)

Verbunt, F.; van Gent, R. H.

2011-04-01

We present Machine-readable versions of the star catalogues of de Houtman (1602), Kepler (1627: Secunda Classis and Tertia Classis) and Halley (1679). In addition to the data from the Historical catalogue, the machine-readable version contains the modern identification with a Hipparcos star and the latter's magnitude, and based on this identification the positional accuracy. For Kepler's catalogues we also give cross references to the catalogue of Ptolemaios (in the edition by Toomer 1998). (4 data files).

The Kepler Catalog of Stellar Flares

NASA Astrophysics Data System (ADS)

Davenport, James R. A.

2016-09-01

A homogeneous search for stellar flares has been performed using every available Kepler light curve. An iterative light curve de-trending approach was used to filter out both astrophysical and systematic variability to detect flares. The flare recovery completeness has also been computed throughout each light curve using artificial flare injection tests, and the tools for this work have been made publicly available. The final sample contains 851,168 candidate flare events recovered above the 68% completeness threshold, which were detected from 4041 stars, or 1.9% of the stars in the Kepler database. The average flare energy detected is ˜1035 erg. The net fraction of flare stars increases with g - I color, or decreasing stellar mass. For stars in this sample with previously measured rotation periods, the total relative flare luminosity is compared to the Rossby number. A tentative detection of flare activity saturation for low-mass stars with rapid rotation below a Rossby number of ˜0.03 is found. A power-law decay in flare activity with Rossby number is found with a slope of -1, shallower than typical measurements for X-ray activity decay with Rossby number.

VizieR Online Data Catalog: Common proper motion stars in the Kepler field (Janes, 2017)

NASA Astrophysics Data System (ADS)

Janes, K. A.

2017-08-01

In a search of proper motion catalogs for common proper motion stars in the field of the Kepler spacecraft I identified 93 likely binary systems. A comparison of their rotation periods is a test of the gyrochronology concept. To find their periods I calculated the autocorrelation function (ACF) of the Kepler mission photometry for each star. In most systems for which good periods can be found, the cooler star has a longer period than the hotter component, in general agreement with models. However, there is a wide range in the gradients of lines connecting binary pairs in a period-color diagram. Furthermore, near the solar color, only a few stars have longer periods than the Sun, suggesting that they, and their cooler companions, are not much older than the Sun. In addition, there is an apparent gap at intermediate periods in the period distribution of the late K and early M stars. Either star formation in this direction has been variable, or stars evolve in period at a non-uniform rate, or some stars evolve more rapidly than others at the same mass. Finally, using the ACF as a measure of the activity level, I found that while the F, G, and early K stars become less active as their periods increase, there is no correlation between period and activity for the mid K to early M stars. (1 data file).

NASA KEPLER OPENS THE STUDY OF THE GALAXY’S PLANET POPULATION

NASA Image and Video Library

2017-06-20

NASA's Kepler mission released its eighth Kepler Candidate Catalog, which contains the best measured and most reliable planet candidates from the space telescope's final survey of the Cygnus Field. In the data are 219 new planet candidates, of which 10 are less than twice the size of the Earth and orbit in the habitable zone.

VizieR Online Data Catalog: New Kepler planetary candidates (Ofir+, 2013)

NASA Astrophysics Data System (ADS)

Ofir, A.; Dreizler, S.

2013-10-01

We present first results of our efforts to re-analyze the Kepler photometric dataset, searching for planetary transits using an alternative processing pipeline to the one used by the Kepler mission The SARS pipeline was tried and tested extensively by processing all available CoRoT mission data. For this first paper of the series we used this pipeline to search for (additional) planetary transits only in a small subset of stars - the Kepler objects of interest (KOIs), which are already known to include at least one promising planet candidate. (2 data files).

VizieR Online Data Catalog: Robo-AO Kepler planetary candidate survey. II. (Baranec+, 2016)

NASA Astrophysics Data System (ADS)

Baranec, C.; Ziegler, C.; Law, N. M.; Morton, T.; Riddle, R.; Atkinson, D.; Schonhut, J.; Crepp, J.

2016-10-01

We selected targets that we had not previously observed from the KOI Catalog based on the Q1-Q12 Kepler data (Rowe et al. 2015, Cat. J/ApJS/217/16). These targets were added to the Robo-AO intelligent observing queue and observed during the summer of 2013. We obtained high angular resolution images of 956 Kepler planet candidate host stars with the Robo-AO robotic laser AOs system over the course of 19 nights between 2013 July 21 and 2013 October 25, detailed in Table5. We also include 13 images from 2012 (2012 July 16-September 13) that required additional confirmation of the KOI position in the Robo-AO field of view. All the observations were performed in a queue-scheduled mode in combination with other science programs using the Robo-AO autonomous laser AO system mounted on the robotic 1.5m telescope at Palomar Observatory (exposure time: 90s; observation wavelengths: 600-950nm; FWHM resolution: 0.12''-0.15''; field of view: 44''*44''; pixel scale: 43.1mas/pix; detector format: 10242 pixels; targets observed/hour: 20). We obtained images of 50 KOIs with the NIRC2 instrument behind the Keck II AO system that were previously observed with Robo-AO and had evidence of a companion. Observations were conducted on 2013 June 25, 2013 August 24 and 25, 2014 August 17, and 2015 July 25 in the K, Ks, or Kp filters, and in the narrow mode of NIRC2 (9.952mas/pixel). (4 data files).

VizieR Online Data Catalog: Detection of Kepler multiple M-star systems (Rappaport+, 2014)

NASA Astrophysics Data System (ADS)

Rappaport, S.; Swift, J.; Levine, A.; Joss, M.; Sanchis-Ojeda, R.; Barclay, T.; Still, M.; Handler, G.; Olah, K.; Muirhead, P. S.; Huber, D.; Vida, K.

2017-07-01

In all, we find 297 of the 3897 targets exhibit the requisite significant Fourier transform (FT) signal comprising a base frequency plus its harmonic, with the base frequency exceeding 0.5 cycles/day (i.e., Prot<2 days). We believe that the majority of these periodicities are likely to be due to stellar rotation manifested via starspots, but a significant number may be due to planet transits and binary eclipses. The individual FTs for these systems were further examined to eliminate those which were clearly not due to rotating starspots. In all cases we folded the data modulo the detected fundamental period, and were readily able to rule out cases due to transiting planets since their well-known sharp, relatively rectangular dipping profiles are characteristic. Of course, we also checked the KOI list for matches. Any of the objects that appear in the Kepler eclipsing binary ("EB") star catalog (e.g., Matijevic et al. 2012AJ....143..123M) were likewise eliminated. (2 data files).

The California-Kepler Survey. I. High-resolution Spectroscopy of 1305 Stars Hosting Kepler Transiting Planets

NASA Astrophysics Data System (ADS)

Petigura, Erik A.; Howard, Andrew W.; Marcy, Geoffrey W.; Johnson, John Asher; Isaacson, Howard; Cargile, Phillip A.; Hebb, Leslie; Fulton, Benjamin J.; Weiss, Lauren M.; Morton, Timothy D.; Winn, Joshua N.; Rogers, Leslie A.; Sinukoff, Evan; Hirsch, Lea A.; Crossfield, Ian J. M.

2017-09-01

The California-Kepler Survey (CKS) is an observational program developed to improve our knowledge of the properties of stars found to host transiting planets by NASA’s Kepler Mission. The improvement stems from new high-resolution optical spectra obtained using HIRES at the W. M. Keck Observatory. The CKS stellar sample comprises 1305 stars classified as Kepler objects of interest, hosting a total of 2075 transiting planets. The primary sample is magnitude-limited ({Kp}< 14.2) and contains 960 stars with 1385 planets. The sample was extended to include some fainter stars that host multiple planets, ultra-short period planets, or habitable zone planets. The spectroscopic parameters were determined with two different codes, one based on template matching and the other on direct spectral synthesis using radiative transfer. We demonstrate a precision of 60 K in {T}{eff}, 0.10 dex in {log}g, 0.04 dex in [{Fe}/{{H}}], and 1.0 {km} {{{s}}}-1 in V\\sin I. In this paper, we describe the CKS project and present a uniform catalog of spectroscopic parameters. Subsequent papers in this series present catalogs of derived stellar properties such as mass, radius, and age; revised planet properties; and statistical explorations of the ensemble. CKS is the largest survey to determine the properties of Kepler stars using a uniform set of high-resolution, high signal-to-noise ratio spectra. The HIRES spectra are available to the community for independent analyses. Based on observations obtained at the W. M. Keck Observatory, which is operated jointly by the University of California and the California Institute of Technology. Keck time was granted for this project by the University of California, and California Institute of Technology, the University of Hawaii, and NASA.

Kepler-90 System Compared to Our Solar System (Artist's Concept)

NASA Image and Video Library

2017-12-14

Our solar system now is tied for most number of planets around a single star, with the recent discovery of an eighth planet circling Kepler-90, a Sun-like star 2,545 light years from Earth. The planet was discovered in data from NASA's Kepler Space Telescope. This artist's concept depicts the Kepler-90 system compared with our own solar system. The newly-discovered Kepler-90i -- a sizzling hot, rocky planet that orbits its star once every 14.4 days -- was found using machine learning from Google. Machine learning is an approach to artificial intelligence in which computers "learn." In this case, computers learned to identify planets by finding in Kepler data instances where the telescope recorded changes in starlight caused by planets beyond our solar system, known as exoplanets. https://photojournal.jpl.nasa.gov/catalog/PIA22193

A Search for Refraction in the Kepler Gas Giant Data Set

NASA Astrophysics Data System (ADS)

Sheets, Holly; Jacob, Laurent; Cowan, Nicolas; Deming, Drake

2018-01-01

I will present the results of the first systematic search for refraction in the atmospheres of giant planets in the Kepler data set. We used the approximations of Sidis and Sari (ApJ, 2010, 720, 904S) to select the best candidates from the Kepler planet catalog for the search. We set limits on the strength of the effect, and I will relate these limits to other, more recent modeling methods.

Kepler Planet Detection Metrics: Automatic Detection of Background Objects Using the Centroid Robovetter

NASA Technical Reports Server (NTRS)

Mullally, Fergal

2017-01-01

We present an automated method of identifying background eclipsing binaries masquerading as planet candidates in the Kepler planet candidate catalogs. We codify the manual vetting process for Kepler Objects of Interest (KOIs) described in Bryson et al. (2013) with a series of measurements and tests that can be performed algorithmically. We compare our automated results with a sample of manually vetted KOIs from the catalog of Burke et al. (2014) and find excellent agreement. We test the performance on a set of simulated transits and find our algorithm correctly identifies simulated false positives approximately 50 of the time, and correctly identifies 99 of simulated planet candidates.

Revised Stellar Properties of Kepler Targets for the Q1-17 (DR25) Transit Detection Run

NASA Astrophysics Data System (ADS)

Mathur, Savita; Huber, Daniel; Batalha, Natalie M.; Ciardi, David R.; Bastien, Fabienne A.; Bieryla, Allyson; Buchhave, Lars A.; Cochran, William D.; Endl, Michael; Esquerdo, Gilbert A.; Furlan, Elise; Howard, Andrew; Howell, Steve B.; Isaacson, Howard; Latham, David W.; MacQueen, Phillip J.; Silva, David R.

2017-04-01

The determination of exoplanet properties and occurrence rates using Kepler data critically depends on our knowledge of the fundamental properties (such as temperature, radius, and mass) of the observed stars. We present revised stellar properties for 197,096 Kepler targets observed between Quarters 1–17 (Q1-17), which were used for the final transiting planet search run by the Kepler Mission (Data Release 25, DR25). Similar to the Q1–16 catalog by Huber et al., the classifications are based on conditioning published atmospheric parameters on a grid of Dartmouth isochrones, with significant improvements in the adopted method and over 29,000 new sources for temperatures, surface gravities, or metallicities. In addition to fundamental stellar properties, the new catalog also includes distances and extinctions, and we provide posterior samples for each stellar parameter of each star. Typical uncertainties are ∼27% in radius, ∼17% in mass, and ∼51% in density, which is somewhat smaller than previous catalogs because of the larger number of improved {log}g constraints and the inclusion of isochrone weighting when deriving stellar posterior distributions. On average, the catalog includes a significantly larger number of evolved solar-type stars, with an increase of 43.5% in the number of subgiants. We discuss the overall changes of radii and masses of Kepler targets as a function of spectral type, with a particular focus on exoplanet host stars.

Comet 67P Seen by Kepler

NASA Image and Video Library

2016-10-07

The European Space Agency's Rosetta mission concluded its study of comet 67P/Churyumov-Gerasimenko on Sept. 30, 2016. NASA's planet-hunting Kepler spacecraft observed the comet during the final month of the Rosetta mission, while the comet was not visible from Earth. This animation is composed of images from Kepler of the comet. From Sept. 7 through Sept. 20, the Kepler spacecraft, operating in its K2 mission, fixed its gaze on comet 67P. From the distant vantage point of Kepler, the comet's nucleus and tail could be observed. The long-range view from Kepler complements the closeup view of the Rosetta spacecraft, providing context for the high-resolution investigation Rosetta performed as it descended closer and closer to the comet. During the two-week period of study, Kepler took a picture of the comet every 30 minutes. The animation shows a period of 29.5 hours of observation from Sept. 17 thru Sept. 18. The comet is seen passing through Kepler's field of view from top right to bottom left, as outlined by the diagonal strip. The white dots represent stars and other regions in space studied during K2's tenth observing campaign. As a comet travels through space it sheds a tail of gas and dust. The more material that is shed, the more surface area there is to reflect sunlight. A comet's activity level can be obtained by measuring the reflected sunlight. Analyzing the Kepler data, scientists will be able to determine the amount of mass lost each day as comet 67P travels through the solar system. An animation is available at http://photojournal.jpl.nasa.gov/catalog/PIA21072

VizieR Online Data Catalog: The KepVIM catalog (Makarov+, 2016)

NASA Astrophysics Data System (ADS)

Makarov, V. V.; Goldin, A.

2016-07-01

The algorithm described in section 4 was applied to the entire collection of "long-cadence" files archived in the MAST for the principal Kepler mission. A single variability-induced motion (VIM) detection corresponds to a complete data set for a given target collected during one quarter. Therefore, a single target can generate up to 17 VIM detections in the catalog. (2 data files).

Kepler Supernova Remnant: A View from Hubble Space Telescope

NASA Image and Video Library

2004-10-06

This image represents a view of NASA Kepler supernova remnant taken in X-rays, visible light, and infrared radiation, indicating that the bubble of gas that makes up the supernova remnant appears different in various types of light. http://photojournal.jpl.nasa.gov/catalog/PIA06909

VizieR Online Data Catalog: Robo-AO Kepler Planetary Candidate Survey. III. (Ziegler+, 2017)

NASA Astrophysics Data System (ADS)

Ziegler, C.; Law, N. M.; Morton, T.; Baranec, C.; Riddle, R.; Atkinson, D.; Baker, A.; Roberts, S.; Ciardi, D. R.

2018-04-01

KOI targets were selected from the KOI catalog based on Q1-Q17 Kepler data (Borucki et al. 2010ApJ...713L.126B, 2011, J/ApJ/728/117, J/ApJ/736/19; Batalha et al. 2013, J/ApJS/204/24; Burke et al. 2014, J/ApJS/210/19; Rowe et al. 2014, J/ApJ/784/45; Thompson et al. 2015, J/ApJ/812/46). We selected targets not observed in Law et al. 2014ApJ...791...35L and Baranec et al. 2016, J/AJ/152/18, with the objective of completing the Robo-AO survey of all KOIs, including those with already detected companions. We obtained high-angular-resolution images of the 1629 KOIs during 55 separate nights of observations between 2012 July 16 and 2015 June 12 (UT), detailed in Table 9 in the Appendix. The observations were performed using the Robo-AO laser adaptive optics system (Riddle et al. 2012SPIE.8447E..2OR; Baranec et al. 2013JVE....7250021B, 2014ApJ...790L...8B) mounted on the Palomar 1.5 m telescope. (6 data files).

Synthetic Survey of the Kepler Field

NASA Astrophysics Data System (ADS)

Wells, Mark; Prša, Andrej

2018-01-01

In the era of large scale surveys, including LSST and Gaia, binary population studies will flourish due to the large influx of data. In addition to probing binary populations as a function of galactic latitude, under-sampled groups such as low mass binaries will be observed at an unprecedented rate. To prepare for these missions, binary population simulations need to be carried out at high fidelity. These simulations will enable the creation of simulated data and, through comparison with real data, will allow the underlying binary parameter distributions to be explored. In order for the simulations to be considered robust, they should reproduce observed distributions accurately. To this end we have developed a simulator which takes input models and creates a synthetic population of eclipsing binaries. Starting from a galactic single star model, implemented using Galaxia, a code by Sharma et al. (2011), and applying observed multiplicity, mass-ratio, period, and eccentricity distributions, as reported by Raghavan et al. (2010), Duchêne & Kraus (2013), and Moe & Di Stefano (2017), we are able to generate synthetic binary surveys that correspond to any survey cadences. In order to calibrate our input models we compare the results of our synthesized eclipsing binary survey to the Kepler Eclipsing Binary catalog.

Kepler Fine Guidance Sensor Data

NASA Technical Reports Server (NTRS)

Van Cleve, Jeffrey; Campbell, Jennifer Roseanna

2017-01-01

The Kepler and K2 missions collected Fine Guidance Sensor (FGS) data in addition to the science data, as discussed in the Kepler Instrument Handbook (KIH, Van Cleve and Caldwell 2016). The FGS CCDs are frame transfer devices (KIH Table 7) located in the corners of the Kepler focal plane (KIH Figure 24), which are read out 10 times every second. The FGS data are being made available to the user community for scientific analysis as flux and centroid time series, along with a limited number of FGS full frame images which may be useful for constructing a World Coordinate System (WCS) or otherwise putting the time series data in context. This document will describe the data content and file format, and give example MATLAB scripts to read the time series. There are three file types delivered as the FGS data.1. Flux and Centroid (FLC) data: time series of star signal and centroid data. 2. Ancillary FGS Reference (AFR) data: catalog of information about the observed stars in the FLC data. 3. FGS Full-Frame Image (FGI) data: full-frame image snapshots of the FGS CCDs.

Where Kepler Sees

NASA Image and Video Library

2009-04-16

This star chart illustrates the large patch of sky that NASA Kepler mission will stare at for the duration of its three-and-a-half-year lifetime. The planet hunter's full field of view occupies 100 square degrees of our Milky Way galaxy, in the constellations Cygnus and Lyra. Kepler's focal plane, or the area where starlight is focused, is depicted on the star chart as a series of 42 vertical and horizontal rectangles. These rectangles represent the 95-megapixel camera's 42 charge-coupled devices, or CCDs. Scientists selected the orientation of the focal plane's field of view to avoid the region's brightest stars, which are shown as the largest black dots. Some of these bright stars can be seen falling in between the CCD modules, in areas that are not imaged. This was done so that the brightest stars will not saturate large portions of the detectors. Saturation causes signals from the bright stars to spill, or "bloom," into nearby planet-hunting territory. http://photojournal.jpl.nasa.gov/catalog/PIA11983

Exploring exoplanet populations with NASA's Kepler Mission

NASA Astrophysics Data System (ADS)

Batalha, Natalie M.

2014-09-01

The Kepler Mission is exploring the diversity of planets and planetary systems. Its legacy will be a catalog of discoveries sufficient for computing planet occurrence rates as a function of size, orbital period, star type, and insolation flux. The mission has made significant progress toward achieving that goal. Over 3,500 transiting exoplanets have been identified from the analysis of the first 3 y of data, 100 planets of which are in the habitable zone. The catalog has a high reliability rate (85-90% averaged over the period/radius plane), which is improving as follow-up observations continue. Dynamical (e.g., velocimetry and transit timing) and statistical methods have confirmed and characterized hundreds of planets over a large range of sizes and compositions for both single- and multiple-star systems. Population studies suggest that planets abound in our galaxy and that small planets are particularly frequent. Here, I report on the progress Kepler has made measuring the prevalence of exoplanets orbiting within one astronomical unit of their host stars in support of the National Aeronautics and Space Administration's long-term goal of finding habitable environments beyond the solar system.

Exploring exoplanet populations with NASA's Kepler Mission.

PubMed

Batalha, Natalie M

2014-09-02

The Kepler Mission is exploring the diversity of planets and planetary systems. Its legacy will be a catalog of discoveries sufficient for computing planet occurrence rates as a function of size, orbital period, star type, and insolation flux. The mission has made significant progress toward achieving that goal. Over 3,500 transiting exoplanets have been identified from the analysis of the first 3 y of data, 100 planets of which are in the habitable zone. The catalog has a high reliability rate (85-90% averaged over the period/radius plane), which is improving as follow-up observations continue. Dynamical (e.g., velocimetry and transit timing) and statistical methods have confirmed and characterized hundreds of planets over a large range of sizes and compositions for both single- and multiple-star systems. Population studies suggest that planets abound in our galaxy and that small planets are particularly frequent. Here, I report on the progress Kepler has made measuring the prevalence of exoplanets orbiting within one astronomical unit of their host stars in support of the National Aeronautics and Space Administration's long-term goal of finding habitable environments beyond the solar system.

Kepler Planet Detection Metrics: Robovetter Completeness and Effectiveness for Data Release 25

NASA Technical Reports Server (NTRS)

Coughlin, Jeffrey L.

2017-01-01

In general, the Kepler pipeline identifies a list of Threshold Crossing Events (TCEs), which are periodic flux decrements meeting certain criteria (Jenkins, 2017). These TCEs are reviewed and those that appear consistent with astrophysically transiting or eclipsing systems are classified as Kepler Objects of Interest (KOIs). Further review is given to KOIs, which are then dispositioned as Planet Candidates (PCs) or False Positive (FPs). FPs are further denoted by four major flags that indicate if the signal is Not Transit-Like (NTL), due to a Stellar Eclipse (SS; previously referred to as Significant Secondary), and/or due to contamination from a source other than the target as evidenced by a Centroid Offset (CO) oran Ephemeris Match (EM) with another object. This entire TCE review process is known as dispositioning or vetting.In the first five Kepler mission planet candidate catalogs (Borucki et al., 2011a,b; Batalha et al., 2013; Burke et al., 2014; Rowe et al., 2015), TCEs were manually examined on an individual basis and dispositioned using various plots and quantitative diagnostic tests (see e.g., Coughlin, 2017). In the sixth catalog, Mullally et al. (2015a) employed partial automation via simple parameter cuts to automatically disposition a large fraction of TCEs as not transit-like. Mullally et al. (2015a) also used an automated technique known as the centroid Robovetter (Mullally, 2017) to automatically identify some FP KOIs due to centroid offsets - a telltale signature of light contamination from another target. The remaining targets were manually dispositioned. In the seventh catalog, Coughlin et al. (2016) automated theentire dispositioning process using what is collectively known simply as the Robovetter.In the eighth and final mission catalog, Thompson et al. (2017) use a revised Robovetter to automate the dispositioning of all TCEs with an emphasis on creating a catalog suitable for accurately determining planet occurrence rates. In order to

VizieR Online Data Catalog: The hot Jupiter Kepler-13Ab planet's occultation (Shporer+, 2014)

NASA Astrophysics Data System (ADS)

Shporer, A.; O'Rourke, J. G.; Knutson, H. A.; Szabo, G. M.; Zhao, M.; Burrows, A.; Fortney, J.; Agol, E.; Cowan, N. B.; Desert, J.-M.; Howard, A. W.; Isaacson, H.; Lewis, N. K.; Showman, A. P.; Todorov, K. O.

2017-07-01

Here we carry out an atmospheric characterization of Kepler-13Ab by measuring its occultation in four different wavelength bands, from the infrared (IR; Spitzer/Infrared array camera (IRAC) 4.5 um and 3.6 um), through the near-IR (NIR; Ks band), to the optical (Kepler). We also analyze the Kepler phase curve and obtain Keck/high-resolution echelle spectrometer (HIRES) spectra that result in revised parameters for the objects in the system. (4 data files).

Stellar Flares Observed in Long-cadence Data from the Kepler Mission

NASA Astrophysics Data System (ADS)

Van Doorsselaere, Tom; Shariati, Hoda; Debosscher, Jonas

2017-10-01

We aim to perform a statistical study of stellar flares observed by Kepler. We want to study the flare amplitude, duration, energy, and occurrence rates, and how they are related to the spectral type and rotation period. To that end, we have developed an automated flare detection and characterization algorithm. We have harvested the stellar parameters from the Kepler input catalog and the rotation periods from McQuillan et al. We find several new candidate A stars showing flaring activity. Moreover, we find 653 giants with flares. From the statistical distribution of flare properties, we find that the flare amplitude distribution has a similar behavior between F+G types and K+M types. The flare duration and flare energy seem to be grouped between G+K+M types versus F types and giants. We also detect a tail of stars with high flare occurrence rates across all spectral types (but most prominent in the late spectral types), and this is compatible with the existence of “flare stars.” Finally, we have found a strong correlation of the flare occurrence rate and the flare amplitude with the stellar rotation period: a quickly rotating star is more likely to flare often and has a higher chance of generating large flares.

VizieR Online Data Catalog: Kepler-80 transit timing observations (MacDonald+, 2016)

NASA Astrophysics Data System (ADS)

MacDonald, M. G.; Ragozzine, D.; Fabrycky, D. C.; Ford, E. B.; Holman, M. J.; Isaacson, H. T.; Lissauer, J. J.; Lopez, E. D.; Mazeh, T.; Rogers, L.; Rowe, J. F.; Steffen, J. H.; Torres, G.

2017-05-01

Kepler-80 was observed photometrically by the Kepler Space Telescope. We had access to several sets of Transit Timing (TT) measurements, including the publicly available data from Rowe & Thompson (arXiv:1504.00707) and Mazeh et al. 2013 (Cat. J/ApJS/208/16). We also had the updated long-cadence TT estimates from the Mazeh group (Holczer et al. 2016, Cat. J/ApJS/225/9) and short-cadence TT data from both co-authors JR and DF. These were all measured using similar methods (see Mazeh et al. 2013, Cat. J/ApJS/208/16) and had no major differences. Spectra were taken of Kepler-80 by Keck and McDonald Observatories, and these spectra and preliminary interpretations are available on the Kepler Community Follow-up Observing Program (CFOP) website (https://cfop.ipac.caltech.edu). We acquired an 1800s high-resolution spectrum with the Keck I telescope and the High Resolution Echelle Spectrometer (HIRES) on 2011 July 20. The standard California Planet Search setup and data reduction of HIRES was used, resulting in a S/N of 35 at 5500Å. The C2 decker, with dimensions of 0.87''*14'', was used to allow a resolution of ~60000 and sky subtraction. (5 data files).

Advances in the Kepler Transit Search Engine

NASA Astrophysics Data System (ADS)

Jenkins, Jon M.

2016-10-01

Twenty years ago, no planets were known outside our own solar system. Since then, the discoveries of ~1500 exoplanets have radically altered our views of planets and planetary systems. This revolution is due in no small part to the Kepler Mission, which has discovered >1000 of these planets and >4000 planet candidates. While Kepler has shown that small rocky planets and planetary systems are quite common, the quest to find Earth's closest cousins and characterize their atmospheres presses forward with missions such as NASA Explorer Program's Transiting Exoplanet Survey Satellite (TESS) slated for launch in 2017 and ESA's PLATO mission scheduled for launch in 2024. These future missions pose daunting data processing challenges in terms of the number of stars, the amount of data, and the difficulties in detecting weak signatures of transiting small planets against a roaring background. These complications include instrument noise and systematic effects as well as the intrinsic stellar variability of the subjects under scrutiny. In this paper we review recent developments in the Kepler transit search pipeline improving both the yield and reliability of detected transit signatures. Many of the phenomena in light curves that represent noise can also trigger transit detection algorithms. The Kepler Mission has expended great effort in suppressing false positives from its planetary candidate catalogs. Over 18,000 transit-like signatures can be identified for a search across 4 years of data. Most of these signatures are artifacts, not planets. Vetting all such signatures historically takes several months' effort by many individuals. We describe the application of machine learning approaches for the automated vetting and production of planet candidate catalogs. These algorithms can improve the efficiency of the human vetting effort as well as quantifying the likelihood that each candidate is truly a planet. This information is crucial for obtaining valid planet occurrence

Exploring exoplanet populations with NASA’s Kepler Mission

PubMed Central

Batalha, Natalie M.

2014-01-01

The Kepler Mission is exploring the diversity of planets and planetary systems. Its legacy will be a catalog of discoveries sufficient for computing planet occurrence rates as a function of size, orbital period, star type, and insolation flux. The mission has made significant progress toward achieving that goal. Over 3,500 transiting exoplanets have been identified from the analysis of the first 3 y of data, 100 planets of which are in the habitable zone. The catalog has a high reliability rate (85–90% averaged over the period/radius plane), which is improving as follow-up observations continue. Dynamical (e.g., velocimetry and transit timing) and statistical methods have confirmed and characterized hundreds of planets over a large range of sizes and compositions for both single- and multiple-star systems. Population studies suggest that planets abound in our galaxy and that small planets are particularly frequent. Here, I report on the progress Kepler has made measuring the prevalence of exoplanets orbiting within one astronomical unit of their host stars in support of the National Aeronautics and Space Administration’s long-term goal of finding habitable environments beyond the solar system. PMID:25049406

VizieR Online Data Catalog: Kepler-10 chemical composition (Liu+, 2016)

NASA Astrophysics Data System (ADS)

Liu, F.; Yong, D.; Asplund, M.; Ramirez, I.; Melendez, J.; Gustafsson, B.; Howes, L. M.; Roederer, I. U.; Lambert, D. L.; Bensby, T.

2016-09-01

We obtained high resolution and high SNR spectra with the Canada-France-Hawaii Telescope (CFHT), the Hobby-Eberly Telescope (HET) and the Magellan Clay Telescope. We observed Kepler-10 with the Echelle SpectroPolarimetric Device for the Observation of Stars at the CFHT during 2013 June. The spectral revolving power is 68000 and the spectral range is 3800-8900Å. We also observed Kepler-10 with the High Resolution Spectrograph (HRS) on the HET at McDonald Observatory during 2011 May. A total integration time of 6.8h was needed to achieve SNR>350 per pixel. The spectrum has a spectral resolving power of 60000 and covers 4100-7800Å, with a gap of about 100Å around 6000Å. (4 data files).

VizieR Online Data Catalog: Kepler multiple transiting planet systems (Wang+, 2015)

NASA Astrophysics Data System (ADS)

Wang, J.; Fischer, D. A.; Xie, J.-W.; Ciardi, D. R.

2017-10-01

The sample of MTPSs remains the same as that in Wang et al. (2014, J/ApJ/783/4). From the NASA Exoplanet Archive (http://exoplanetarchive.ipac.caltech.edu), we select Kepler objects of interest (KOIs) that satisfy the following criteria: (1) disposition of either Candidate or Confirmed; (2) with at least two planet candidates; (3) Kepler magnitude (KP) brighter than 13.5. The above selection criteria resulted in 138 MTPSs in Wang et al. (2014, J/ApJ/783/4). With the updated Exoplanet Archive, the selection criteria resulted in 208 MTPSs. In this paper, we focus on the 138 MTPSs to be consistent with previous work. (4 data files).

VizieR Online Data Catalog: Final Kepler transiting planet search (DR25) (Twicken+, 2016)

NASA Astrophysics Data System (ADS)

Twicken, J. D.; Jenkins, J. M.; Seader, S. E.; Tenenbaum, P.; Smith, J. C.; Brownston, L. S.; Burke, C. J.; Catanzarite, J. H.; Clarke, B. D.; Cote, M. T.; Girouard, F. R.; Klaus, T. C.; Li, J.; McCauliff, S. D.; Morris, R. L.; Wohler, B.; Campbell, J. R.; Uddin, A. K.; Zamudio, K. A.; Sabale, A.; Bryson, S. T.; Caldwell, D. A.; Christiansen, J. L.; Coughlin, J. L.; Haas, M. R.; Henze, C. E.; Sanderfer, D. T.; Thompson, S. E.

2017-01-01

The Kepler spacecraft is in an Earth-trailing heliocentric orbit and maintained a boresight pointing centered on α=19h22m40s, δ=+44.5° during the primary mission. The Kepler photometer acquired data on a 115-square-degree region of the sky. The data were acquired on 29.4-minute intervals, colloquially known as "long cadences". Long-cadence pixel values were obtained by accumulating 270 consecutive 6.02s exposures. Science acquisition of Q1 data began at 2009-05-13 00:01:07Z, and acquisition of Q17 data concluded at 2013-05-11 12:16:22Z. This time period contains 71427 long-cadence intervals. A total of 198709 targets observed by Kepler were searched for evidence of transiting planets in the final Q1-Q17 pipeline run (see Table1). The results of past Kepler Mission transiting planet searches have been presented in Tenenbaum et al. 2012 (Cat. J/ApJS/199/24) for Quarter 1 through Quarter 3 (i.e., Q1-Q3), Tenenbaum et al. 2013ApJS..206....5T for Q1-Q12, Tenenbaum et al. 2014ApJS..211....6T for Q1-Q16, and Seader et al. 2015 (Cat. J/ApJS/217/18) for Q1-Q17. We now present results of the final Kepler transiting planet search encompassing the complete 17-quarter primary mission. The data release for the final Q1-Q17 pipeline processing is referred to as Data Release 25 (DR25). (3 data files).

The TESS Input Catalog and Selection of Targets for the TESS Transit Search

NASA Astrophysics Data System (ADS)

Pepper, Joshua; Stassun, Keivan G.; Paegert, Martin; Oelkers, Ryan; De Lee, Nathan Michael; Torres, Guillermo; TESS Target Selection Working Group

2018-01-01

The TESS mission will photometrically survey millions of the brightest stars over almost the entire the sky to detect transiting exoplanets. A key step to enable that search is the creation of the TESS Input Catalog (TIC), a compiled catalog of 700 million stars and galaxies with observed and calculated parameters. From the TIC we derive the Candidate Target List (CTL) to identify target stars for the 2-minute TESS postage stamps. The CTL is designed to identify the best stars for the detection of small planets, which includes all bright cool dwarf stars in the sky. I will describe the target selection strategy, the distribution of stars in the current CTL, and how both the TIC and CTL will expand and improve going forward.

Kepler eclipsing binary stars. IV. Precise eclipse times for close binaries and identification of candidate three-body systems

DOE Office of Scientific and Technical Information (OSTI.GOV)

Conroy, Kyle E.; Stassun, Keivan G.; Prša, Andrej

2014-02-01

We present a catalog of precise eclipse times and analysis of third-body signals among 1279 close binaries in the latest Kepler Eclipsing Binary Catalog. For these short-period binaries, Kepler's 30 minute exposure time causes significant smearing of light curves. In addition, common astrophysical phenomena such as chromospheric activity, as well as imperfections in the light curve detrending process, can create systematic artifacts that may produce fictitious signals in the eclipse timings. We present a method to measure precise eclipse times in the presence of distorted light curves, such as in contact and near-contact binaries which exhibit continuously changing light levelsmore » in and out of eclipse. We identify 236 systems for which we find a timing variation signal compatible with the presence of a third body. These are modeled for the light travel time effect and the basic properties of the third body are derived. This study complements J. A. Orosz et al. (in preparation), which focuses on eclipse timing variations of longer period binaries with flat out-of-eclipse regions. Together, these two papers provide comprehensive eclipse timings for all binaries in the Kepler Eclipsing Binary Catalog, as an ongoing resource freely accessible online to the community.« less

Kepler Planet Detection Metrics: Per-Target Detection Contours for Data Release 25

NASA Technical Reports Server (NTRS)

Burke, Christopher J.; Catanzarite, Joseph

2017-01-01

A necessary input to planet occurrence calculations is an accurate model for the pipeline completeness (Burke et al., 2015). This document describes the use of the Kepler planet occurrence rate products in order to calculate a per-target detection contour for the measured Data Release 25 (DR25) pipeline performance. A per-target detection contour measures for a given combination of orbital period, Porb, and planet radius, Rp, what fraction of transit signals are recoverable by the Kepler pipeline (Twicken et al., 2016; Jenkins et al., 2017). The steps for calculating a detection contour follow the procedure outlined in Burke et al. (2015), but have been updated to provide improved accuracy enabled by the substantially larger database of transit injection and recovery tests that were performed on the final version (i.e., SOC 9.3) of the Kepler pipeline (Christiansen, 2017; Burke Catanzarite, 2017a). In the following sections, we describe the main inputs to the per-target detection contour and provide a worked example of the python software released with this document (Kepler Planet Occurrence Rate Tools KeplerPORTs)1 that illustrates the generation of a detection contour in practice. As background material for this document and its nomenclature, we recommend the reader be familiar with the previous method of calculating a detection contour (Section 2 of Burke et al.,2015), input parameters relevant for describing the data quantity and quality of Kepler targets (Burke Catanzarite, 2017b), and the extensive new transit injection and recovery tests of the Kepler pipeline (Christiansen et al., 2016; Burke Catanzarite, 2017a; Christiansen, 2017).

KSWAGS: A Swift X-Ray and UV Survey of the Kepler Field 1

NASA Technical Reports Server (NTRS)

Smith, Krista Lynne; Boyd, Patricia T.; Mushotzky, Richard F.; Gehrels, Neil; Edelson, Rick; Howell, Steve B.; Gelino, Dawn M.; Brown, Alexander; Young, Steve

2015-01-01

We introduce the first phase of the Kepler-Swift Active Galaxies and Stars survey (KSwAGS), a simultaneous X-ray and UV survey of approximately 6 square degrees of the Kepler field using the Swift XRT and UVOT. We detect 93 unique X-ray sources with S/N greater or equal to 3 with the XRT, of which 60 have UV counterparts. We use the Kepler Input Catalog (KIC) to obtain the optical counterparts of these sources, and construct the fX / fV ratio as a first approximation of the classification of the source. The survey produces a mixture of stellar sources, extragalactic sources, and sources which we are not able to classify with certainty. We have obtained optical spectra for thirty of these targets, and are conducting an ongoing observing campaign to fully identify the sample. For sources classified as stellar or AGN with certainty, we construct SEDs using the 2MASS, UBV and GALEX data supplied for their optical counterparts by the KIC, and show that the SEDs differ qualitatively between the source types, and so can offer a method of classification in absence of a spectrum. Future papers in this series will analyze the timing properties of the stars and AGN in our sample separately. Our survey provides the first X-ray and UV data for a number of known variable stellar sources, as well as a large number of new X-ray detections in this well-studied portion of the sky. The KSwAGS survey is currently ongoing in the K2 ecliptic plane fields.

Cluster of Stars in Kepler Sight

NASA Image and Video Library

2009-04-16

This image zooms into a small portion of NASA Kepler full field of view, an expansive, 100-square-degree patch of sky in our Milky Way galaxy. An eight-billion-year-old cluster of stars 13,000 light-years from Earth, called NGC 6791, can be seen in the image. Clusters are families of stars that form together out of the same gas cloud. This particular cluster is called an open cluster, because the stars are loosely bound and have started to spread out from each other. The area pictured is 0.2 percent of Kepler's full field of view, and shows hundreds of stars in the constellation Lyra. The image has been color-coded so that brighter stars appear white, and fainter stars, red. It is a 60-second exposure, taken on April 8, 2009, one day after the spacecraft's dust cover was jettisoned. Kepler was designed to hunt for planets like Earth. The mission will spend the next three-and-a-half years staring at the same stars, looking for periodic dips in brightness. Such dips occur when planets cross in front of their stars from our point of view in the galaxy, partially blocking the starlight. To achieve the level of precision needed to spot planets as small as Earth, Kepler's images are intentionally blurred slightly. This minimizes the number of saturated stars. Saturation, or "blooming," occurs when the brightest stars overload the individual pixels in the detectors, causing the signal to spill out into nearby pixels. http://photojournal.jpl.nasa.gov/catalog/PIA11986

Improving Kepler Pipeline Sensitivity with Pixel Response Function Photometry.

NASA Astrophysics Data System (ADS)

Morris, Robert L.; Bryson, Steve; Jenkins, Jon Michael; Smith, Jeffrey C

2014-06-01

We present the results of our investigation into the feasibility and expected benefits of implementing PRF-fitting photometry in the Kepler Science Processing Pipeline. The Kepler Pixel Response Function (PRF) describes the expected system response to a point source at infinity and includes the effects of the optical point spread function, the CCD detector responsivity function, and spacecraft pointing jitter. Planet detection in the Kepler pipeline is currently based on simple aperture photometry (SAP), which is most effective when applied to uncrowded bright stars. Its effectiveness diminishes rapidly as target brightness decreases relative to the effects of noise sources such as detector electronics, background stars, and image motion. In contrast, PRF photometry is based on fitting an explicit model of image formation to the data and naturally accounts for image motion and contributions of background stars. The key to obtaining high-quality photometry from PRF fitting is a high-quality model of the system's PRF, while the key to efficiently processing the large number of Kepler targets is an accurate catalog and accurate mapping of celestial coordinates onto the focal plane. If the CCD coordinates of stellar centroids are known a priori then the problem of PRF fitting becomes linear. A model of the Kepler PRF was constructed at the time of spacecraft commissioning by fitting piecewise polynomial surfaces to data from dithered full frame images. While this model accurately captured the initial state of the system, the PRF has evolved dynamically since then and has been seen to deviate significantly from the initial (static) model. We construct a dynamic PRF model which is then used to recover photometry for all targets of interest. Both simulation tests and results from Kepler flight data demonstrate the effectiveness of our approach. Kepler was selected as the 10th mission of the Discovery Program. Funding for this mission is provided by NASA’s Science

BEER ANALYSIS OF KEPLER AND CoRoT LIGHT CURVES. I. DISCOVERY OF KEPLER-76b: A HOT JUPITER WITH EVIDENCE FOR SUPERROTATION

DOE Office of Scientific and Technical Information (OSTI.GOV)

Faigler, S.; Tal-Or, L.; Mazeh, T.

We present the first case in which the BEER algorithm identified a hot Jupiter in the Kepler light curve, and its reality was confirmed by orbital solutions based on follow-up spectroscopy. The companion Kepler-76b was identified by the BEER algorithm, which detected the BEaming (sometimes called Doppler boosting) effect together with the Ellipsoidal and Reflection/emission modulations (BEER), at an orbital period of 1.54 days, suggesting a planetary companion orbiting the 13.3 mag F star. Further investigation revealed that this star appeared in the Kepler eclipsing binary catalog with estimated primary and secondary eclipse depths of 5 Multiplication-Sign 10{sup -3} andmore » 1 Multiplication-Sign 10{sup -4}, respectively. Spectroscopic radial velocity follow-up observations with Tillinghast Reflector Echelle Spectrograph and SOPHIE confirmed Kepler-76b as a transiting 2.0 {+-} 0.26 M{sub Jup} hot Jupiter. The mass of a transiting planet can be estimated from either the beaming or the ellipsoidal amplitude. The ellipsoidal-based mass estimate of Kepler-76b is consistent with the spectroscopically measured mass while the beaming-based estimate is significantly inflated. We explain this apparent discrepancy as evidence for the superrotation phenomenon, which involves eastward displacement of the hottest atmospheric spot of a tidally locked planet by an equatorial superrotating jet stream. This phenomenon was previously observed only for HD 189733b in the infrared. We show that a phase shift of 10. Degree-Sign 3 {+-} 2. Degree-Sign 0 of the planet reflection/emission modulation, due to superrotation, explains the apparently inflated beaming modulation, resolving the ellipsoidal/beaming amplitude discrepancy. Kepler-76b is one of very few confirmed planets in the Kepler light curves that show BEER modulations and the first to show superrotation evidence in the Kepler band. Its discovery illustrates for the first time the ability of the BEER algorithm to detect

VizieR Online Data Catalog: California-Kepler Survey (CKS). II. Properties (Johnson+, 2017)

NASA Astrophysics Data System (ADS)

Johnson, J. A.; Petigura, E. A.; Fulton, B. J.; Marcy, G. W.; Howard, A. W.; Isaacson, H.; Hebb, L.; Cargile, P. A.; Morton, T. D.; Weiss, L. M.; Winn, J. N.; Rogers, L. A.; Sinukoff, E.; Hirsch, L. A.

2017-11-01

The California-Kepler Survey (CKS) project and goals are described in detail in Paper I (Petigura et al. 2017, Cat. J/AJ/154/107) of this series. In brief, between 2012 and 2015, we obtained high-resolution (R~50000) spectra of 1305 stars identified as Kepler Objects of Interest (KOIs) with Keck/HIRES. We used an exposure meter to achieve a uniform signal-to-noise ratio ~45 per HIRES pixel on blaze near 5500Å. Using these spectra, we derived effective temperature (Teff), surface gravity (logg), metallicity ([Fe/H]), and projected stellar rotation velocity (vsini). In this work, we convert the observed spectroscopic properties of Paper I (Petigura et al. 2017, Cat. J/AJ/154/107) into physical stellar and planetary properties. (2 data files).

VizieR Online Data Catalog: Kepler planetary candidates. V. 3yr Q1-Q12 (Rowe+, 2015)

NASA Astrophysics Data System (ADS)

Rowe, J. F.; Coughlin, J. L.; Antoci, V.; Barclay, T.; Batalha, N. M.; Borucki, W. J.; Burke, C. J.; Bryson, S. T.; Caldwell, D. A.; Campbell, J. R.; Catanzarite, J. H.; Christiansen, J. L.; Cochran, W.; Gilliland, R. L.; Girouard, F. R.; Haas, M. R.; Helminiak, K. G.; Henze, C. E.; Hoffman, K. L.; Howell, S. B.; Huber, D.; Hunter, R. C.; Jang-Condell, H.; Jenkins, J. M.; Klaus, T. C.; Latham, D. W.; Li, J.; Lissauer, J. J.; McCauliff, S. D.; Morris, R. L.; Mullally, F.; Ofir, A.; Quarles, B.; Quintana, E.; Sabale, A.; Seader, S.; Shporer, A.; Smith, J. C.; Steffen, J. H.; Still, M.; Tenenbaum, P.; Thompson, S. E.; Twicken, J. D.; van Laerhoven, C.; Wolfgang, A.; Zamudio, K. A.

2015-04-01

We began with the transit-event candidate list from Tenenbaum et al. (2013ApJS..206....5T) based on a wavelet, adaptive matched filter to search 192313 Kepler targets for periodic drops in flux indicative of a transiting planet. Detections are known as Threshold Crossing Events (TCEs). Tenenbaum et al. utilized three years of Kepler photometric observations (Q1-Q12) -the same data span employed by this study based on SOC 8.3 as part of Data Release 21 (Thompson S. E., Christiansen J. L., Jenkins J. M. et al. Kepler (KSCI-19061-001)). (3 data files).

The EB factory project. II. Validation with the Kepler field in preparation for K2 and TESS

DOE Office of Scientific and Technical Information (OSTI.GOV)

Parvizi, Mahmoud; Paegert, Martin; Stassun, Keivan G., E-mail: mahmoud.parvizi@vanderbilt.edu

Large repositories of high precision light curve data, such as the Kepler data set, provide the opportunity to identify astrophysically important eclipsing binary (EB) systems in large quantities. However, the rate of classical “by eye” human analysis restricts complete and efficient mining of EBs from these data using classical techniques. To prepare for mining EBs from the upcoming K2 mission as well as other current missions, we developed an automated end-to-end computational pipeline—the Eclipsing Binary Factory (EBF)—that automatically identifies EBs and classifies them into morphological types. The EBF has been previously tested on ground-based light curves. To assess the performancemore » of the EBF in the context of space-based data, we apply the EBF to the full set of light curves in the Kepler “Q3” Data Release. We compare the EBs identified from this automated approach against the human generated Kepler EB Catalog of ∼2600 EBs. When we require EB classification with ⩾90% confidence, we find that the EBF correctly identifies and classifies eclipsing contact (EC), eclipsing semi-detached (ESD), and eclipsing detached (ED) systems with a false positive rate of only 4%, 4%, and 8%, while complete to 64%, 46%, and 32%, respectively. When classification confidence is relaxed, the EBF identifies and classifies ECs, ESDs, and EDs with a slightly higher false positive rate of 6%, 16%, and 8%, while much more complete to 86%, 74%, and 62%, respectively. Through our processing of the entire Kepler “Q3” data set, we also identify 68 new candidate EBs that may have been missed by the human generated Kepler EB Catalog. We discuss the EBF's potential application to light curve classification for periodic variable stars more generally for current and upcoming surveys like K2 and the Transiting Exoplanet Survey Satellite.« less

The Eb Factory Project. Ii. Validation With the Kepler Field in Preparation for K2 and Tess

NASA Astrophysics Data System (ADS)

Parvizi, Mahmoud; Paegert, Martin; Stassun, Keivan G.

2014-12-01

Large repositories of high precision light curve data, such as the Kepler data set, provide the opportunity to identify astrophysically important eclipsing binary (EB) systems in large quantities. However, the rate of classical “by eye” human analysis restricts complete and efficient mining of EBs from these data using classical techniques. To prepare for mining EBs from the upcoming K2 mission as well as other current missions, we developed an automated end-to-end computational pipeline—the Eclipsing Binary Factory (EBF)—that automatically identifies EBs and classifies them into morphological types. The EBF has been previously tested on ground-based light curves. To assess the performance of the EBF in the context of space-based data, we apply the EBF to the full set of light curves in the Kepler “Q3” Data Release. We compare the EBs identified from this automated approach against the human generated Kepler EB Catalog of ˜ 2600 EBs. When we require EB classification with ≥slant 90% confidence, we find that the EBF correctly identifies and classifies eclipsing contact (EC), eclipsing semi-detached (ESD), and eclipsing detached (ED) systems with a false positive rate of only 4%, 4%, and 8%, while complete to 64%, 46%, and 32%, respectively. When classification confidence is relaxed, the EBF identifies and classifies ECs, ESDs, and EDs with a slightly higher false positive rate of 6%, 16%, and 8%, while much more complete to 86%, 74%, and 62%, respectively. Through our processing of the entire Kepler “Q3” data set, we also identify 68 new candidate EBs that may have been missed by the human generated Kepler EB Catalog. We discuss the EBF's potential application to light curve classification for periodic variable stars more generally for current and upcoming surveys like K2 and the Transiting Exoplanet Survey Satellite.

VizieR Online Data Catalog: California-Kepler Survey (CKS). III. Planet radii (Fulton+, 2017)

NASA Astrophysics Data System (ADS)

Fulton, B. J.; Petigura, E. A.; Howard, A. W.; Isaacson, H.; Marcy, G. W.; Cargile, P. A.; Hebb, L.; Weiss, L. M.; Johnson, J. A.; Morton, T. D.; Sinukoff, E.; Crossfield, I. J. M.; Hirsch, L. A.

2017-11-01

We adopt the stellar sample and the measured stellar parameters from the California-Kepler Survey (CKS) program (Petigura et al. 2017, Cat. J/AJ/154/107; Paper I). The measured values of Teff, logg, and [Fe/H] are based on a detailed spectroscopic characterization of Kepler Object of Interest (KOI) host stars using observations from Keck/HIRES. In Johnson et al. 2017 (Cat J/AJ/154/108; Paper II), we associated those stellar parameters from Paper I to Dartmouth isochrones (Dotter et al. 2008ApJS..178...89D) to derive improved stellar radii and masses, allowing us to recalculate planetary radii using the light-curve parameters from Mullally et al. 2015 (Cat. J/ApJS/217/31). (1 data file).

Kepler Diamond Mine of Stars

NASA Image and Video Library

2009-04-16

stars. Blooming is an expected side effect of Kepler's ultra-sensitive camera. Some of the lightly saturated stars are candidates for planet searches, while those that are heavily saturated are not. The grid lines across the picture show how the focal plane is laid out on Kepler's camera —the largest ever launched in space at 95 megapixels. There are 42 charge-coupled devices (CCDs), paired into square-shaped modules, whose outline can be seen in the image. A thin black line in each module shows adjacent pairs of CCDs. The thicker black lines that cross through the image are from structures holding the modules together, and were purposely oriented to block out the very brightest stars in Kepler's field of view. The four black corners of the image show where the fine-guidance sensors reside on the focal plane. These sensors are used to hold the telescope's gaze steady by measuring its position on the sky 10 times every second, and by feeding this information to the spacecraft's attitude control system. Ghost images also appear in the image, which are reflections off the lenses above the CCDs. These expected artifacts were mapped out during ground testing for Kepler, and will not affect science observations because they will be removed as the data are processed. http://photojournal.jpl.nasa.gov/catalog/PIA11984

MARVELS Radial Velocity Solutions to Seven Kepler Eclipsing Binaries

NASA Astrophysics Data System (ADS)

Heslar, Michael Francis; Thomas, Neil B.; Ge, Jian; Ma, Bo; Herczeg, Alec; Reyes, Alan; SDSS-III MARVELS Team

2016-01-01

Eclipsing binaries serve momentous purposes to improve the basis of understanding aspects of stellar astrophysics, such as the accurate calculation of the physical parameters of stars and the enigmatic mass-radius relationship of M and K dwarfs. We report the investigation results of 7 eclipsing binary candidates, initially identified by the Kepler mission, overlapped with the radial velocity observations from the SDSS-III Multi-Object APO Radial-Velocity Exoplanet Large-Area Survey (MARVELS). The RV extractions and spectroscopic solutions of these eclipsing binaries were generated by the University of Florida's 1D data pipeline with a median RV precision of ~60-100 m/s, which was utilized for the DR12 data release. We performed the cross-reference fitting of the MARVELS RV data and the Kepler photometric fluxes obtained from the Kepler Eclipsing Binary Catalog (V2) and modelled the 7 eclipsing binaries in the BinaryMaker3 and PHOEBE programs. This analysis accurately determined the absolute physical and orbital parameters of each binary. Most of the companion stars were determined to have masses of K and M dwarf stars (0.3-0.8 M⊙), and allowed for an investigation into the mass-radius relationship of M and K dwarfs. Among the cases are KIC 9163796, a 122.2 day period "heartbeat star", a recently-discovered class of eccentric binaries known for tidal distortions and pulsations, with a high eccentricity (e~0.75) and KIC 11244501, a 0.29 day period, contact binary with a double-lined spectrum and mass ratio (q~0.45). We also report on the possible reclassification of 2 Kepler eclipsing binary candidates as background eclipsing binaries based on the analysis of the flux measurements, flux ratios of the spectroscopic and photometric solutions, the differences in the FOVs, the image processing of Kepler, and RV and spectral analysis of MARVELS.

Kepler Small Habitable Zone Planets

NASA Image and Video Library

2015-07-23

Of the 1,030 confirmed planets from Kepler, a dozen are less than twice the size of Earth and reside in the habitable zone of their host stars. In this diagram, the sizes of the exoplanets are represented by the size of each sphere. These are arranged by size from left to right, and by the type of star they orbit, from the M stars that are significantly cooler and smaller than the sun, to the K stars that are somewhat cooler and smaller than the sun, to the G stars that include the sun. The sizes of the planets are enlarged by 25 times compared to the stars. The Earth is shown for reference. http://photojournal.jpl.nasa.gov/catalog/PIA19827

Kepler Archive Manual

NASA Technical Reports Server (NTRS)

Thompson, Susan E.; Fraquelli, Dorothy; Van Cleve, Jeffrey E.; Caldwell, Douglas A.

2016-01-01

A description of Kepler, its design, performance and operational constraints may be found in the Kepler Instrument Handbook (KIH, Van Cleve Caldwell 2016). A description of Kepler calibration and data processing is described in the Kepler Data Processing Handbook (KDPH, Jenkins et al. 2016; Fanelli et al. 2011). Science users should also consult the special ApJ Letters devoted to early Kepler results and mission design (April 2010, ApJL, Vol. 713 L79-L207). Additional technical details regarding the data processing and data qualities can be found in the Kepler Data Characteristics Handbook (KDCH, Christiansen et al. 2013) and the Data Release Notes (DRN). This archive manual specifically documents the file formats, as they exist for the last data release of Kepler, Data Release 25(KSCI-19065-002). The earlier versions of the archive manual and data release notes act as documentation for the earlier versions of the data files.

Kepler

NASA Technical Reports Server (NTRS)

Howell, Steve B.

2011-01-01

The NASA Kepler mission recently announced over 1200 exoplanet candidates. While some are common Hot Jupiters, a large number are Neptune size and smaller, transit depths suggest sizes down to the radius of Earth. The Kepler project has a fairly high confidence that most of these candidates are real exoplanets. Many analysis steps and lessons learned from Kepler light curves are used during the vetting process. This talk will cover some new results in the areas of stellar variability, solar systems with multiple planets, and how transit-like signatures are vetted for false positives, especially those indicative of small planets.

Kepler Discovery

NASA Image and Video Library

2011-02-02

Douglas Hudgins, a Kepler Program Scientist, speaks during a news conference, Wednesday, Feb. 2, 2010, at NASA Headquarters in Washington. Scientists using NASA's Kepler, a space telescope, recently discovered six planets made of a mix of rock and gases orbiting a single sun-like star, known as Kepler-11, which is located approximately 2,000 light years from Earth. Photo Credit: (NASA/Paul E. Alers)

Kepler: A Search for Terrestrial Planets - Kepler Data Characterization Handbook

NASA Technical Reports Server (NTRS)

Van Cleve, Jeffrey; Christiansen, J. L.; Jenkins, J. M.; Caldwell, D. A.; Barclay, T.; Bryson, S. T.; Burke, C. J.; Campbell, J.; Catanzarite, J.; Clarke, B. D.;

Kepler's Third Law and NASA's "Kepler Mission"

ERIC Educational Resources Information Center

Gould, Alan; Komatsu, Toshi; DeVore, Edna; Harman, Pamela; Koch, David

2015-01-01

NASA's "Kepler Mission" has been wildly successful in discovering exoplanets. This paper summarizes the mission goals, briefly explains the transit method of finding exoplanets and design of the mission, provides some key findings, and describes useful education materials available at the "Kepler" website.

VizieR Online Data Catalog: M67 variable stars from Kepler/K2-Campaign-5 (Gonzalez, 2016)

NASA Astrophysics Data System (ADS)

Gonzalez, G.

2017-06-01

M 67 was observed continuously between 2015 April 27 and July 10 during the Kepler/K2-Campaign-5 (hereafter, 'Campaign-5 field'). It includes 28 850 long-cadence, 204 short-cadence, and several other special targets. Several data products for the Campaign-5 field were released to the public on the NASA Barbara A. Mikulski Archive for Space Telescopes (MAST) website on 2015 October 30 (https://archive.stsci.edu/k2/). We downloaded tar files containing all the long-cadence light-curve (CLC) files of the Campaign-5 targets from the MAST archive. In addition, we downloaded the comprehensive K2 input catalogue (EPIC) for the Campaign-5 field. We supplemented the NASA K2 data with ground-based data, of which Nardiello et al. (2016, Cat. J/MNRAS/455/2337) is our primary source. Nardiello et al. (2016, Cat. J/MNRAS/455/2337) list the positions and white-light magnitudes for 6905 objects in the M 67 field, but they only list BVRI magnitudes, proper motions and membership probabilities for a subset of this large sample. Cross-referencing (using coordinates) the Campaign-5 input catalogue with the Nardiello et al. (2016, Cat. J/MNRAS/455/2337) catalogue resulted in 3201 matches. Of these, 639 have light curves available in the MAST Campaign-5 archive. This will be the working sample. (1 data file).

Average Albedos of Close-in Super-Earths and Super-Neptunes from Statistical Analysis of Long-cadence Kepler Secondary Eclipse Data

NASA Astrophysics Data System (ADS)

Sheets, Holly A.; Deming, Drake

2017-10-01

We present the results of our work to determine the average albedo for small, close-in planets in the Kepler candidate catalog. We have adapted our method of averaging short-cadence light curves of multiple Kepler planet candidates to long-cadence data, in order to detect an average albedo for the group of candidates. Long-cadence data exist for many more candidates than the short-cadence data, and so we separate the candidates into smaller radius bins than in our previous work: 1-2 {R}\\oplus , 2-4 {R}\\oplus , and 4-6 {R}\\oplus . We find that, on average, all three groups appear darker than suggested by the short-cadence results, but not as dark as many hot Jupiters. The average geometric albedos for the three groups are 0.11 ± 0.06, 0.05 ± 0.04, and 0.23 ± 0.11, respectively, for the case where heat is uniformly distributed about the planet. If heat redistribution is inefficient, the albedos are even lower, since there will be a greater thermal contribution to the total light from the planet. We confirm that newly identified false-positive Kepler Object of Interest (KOI) 1662.01 is indeed an eclipsing binary at twice the period listed in the planet candidate catalog. We also newly identify planet candidate KOI 4351.01 as an eclipsing binary, and we report a secondary eclipse measurement for Kepler-4b (KOI 7.01) of ˜7.50 ppm at a phase of ˜0.7, indicating that the planet is on an eccentric orbit.

VizieR Online Data Catalog: Activity cycles in 3203 Kepler stars (Reinhold+, 2017)

NASA Astrophysics Data System (ADS)

Reinhold, T.; Cameron, R. H.; Gizon, L.

2017-05-01

Rvar time series, sine fit parameters, mean rotation periods, and false alarm probabilities of all 3203 Kepler stars are presented. For simplicity, the KIC number and the fit parameters of a certain star are repeated in each line. The fit function to the Rvar(t) time series equals y_fit=Acyc*sin(2*pi/(Pcyc*365)*(t-t0))+Offset. (2 data files).

Kepler Discovery

NASA Image and Video Library

2011-02-02

A scale model of the Kepler space telescope is seen at a news conference, Wednesday, Feb. 2, 2010, at NASA Headquarters in Washington. Scientists using NASA's Kepler, a space telescope, recently discovered six planets made of a mix of rock and gases orbiting a single sun-like star, known as Kepler-11, which is located approximately 2,000 light years from Earth. Photo Credit: (NASA/Paul E. Alers)

Transiting circumbinary planets Kepler-34 b and Kepler-35 b.

PubMed

Welsh, William F; Orosz, Jerome A; Carter, Joshua A; Fabrycky, Daniel C; Ford, Eric B; Lissauer, Jack J; Prša, Andrej; Quinn, Samuel N; Ragozzine, Darin; Short, Donald R; Torres, Guillermo; Winn, Joshua N; Doyle, Laurance R; Barclay, Thomas; Batalha, Natalie; Bloemen, Steven; Brugamyer, Erik; Buchhave, Lars A; Caldwell, Caroline; Caldwell, Douglas A; Christiansen, Jessie L; Ciardi, David R; Cochran, William D; Endl, Michael; Fortney, Jonathan J; Gautier, Thomas N; Gilliland, Ronald L; Haas, Michael R; Hall, Jennifer R; Holman, Matthew J; Howard, Andrew W; Howell, Steve B; Isaacson, Howard; Jenkins, Jon M; Klaus, Todd C; Latham, David W; Li, Jie; Marcy, Geoffrey W; Mazeh, Tsevi; Quintana, Elisa V; Robertson, Paul; Shporer, Avi; Steffen, Jason H; Windmiller, Gur; Koch, David G; Borucki, William J

2012-01-11

Most Sun-like stars in the Galaxy reside in gravitationally bound pairs of stars (binaries). Although long anticipated, the existence of a 'circumbinary planet' orbiting such a pair of normal stars was not definitively established until the discovery of the planet transiting (that is, passing in front of) Kepler-16. Questions remained, however, about the prevalence of circumbinary planets and their range of orbital and physical properties. Here we report two additional transiting circumbinary planets: Kepler-34 (AB)b and Kepler-35 (AB)b, referred to here as Kepler-34 b and Kepler-35 b, respectively. Each is a low-density gas-giant planet on an orbit closely aligned with that of its parent stars. Kepler-34 b orbits two Sun-like stars every 289 days, whereas Kepler-35 b orbits a pair of smaller stars (89% and 81% of the Sun's mass) every 131 days. The planets experience large multi-periodic variations in incident stellar radiation arising from the orbital motion of the stars. The observed rate of circumbinary planets in our sample implies that more than ∼1% of close binary stars have giant planets in nearly coplanar orbits, yielding a Galactic population of at least several million.

Kepler Media Briefing

NASA Image and Video Library

2009-02-19

Jim Fanson, Kepler project manager, at NASA's Jet Propulsion Laboratory in Pasadena, Calif. holds a model of the Kepler spacecraft as he talks about the Kepler mission during a media briefing, Thursday, Feb. 19, 2008, at NASA Headquarters in Washington. Kepler, the first mission with the ability to find planets like earth, is scheduled to launch on March 5, 2009 from Cape Canaveral Air Force Station, Fla. aboard a Delta II rocket. Photo Credit: (NASA/Paul. E. Alers)

Kepler Discovery

NASA Image and Video Library

2011-02-02

William Borucki, Kepler Science Principal Investigator from NASA's Ames Research Center, second from left, speaks during a news conference, Wednesday, Feb. 2, 2010, at NASA Headquarters in Washington as Douglas Hudgins, left, Jack Lissauer and Debra Fischer, far right, look on. Scientists using NASA's Kepler, a space telescope, recently discovered six planets made of a mix of rock and gases orbiting a single sun-like star, known as Kepler-11, which is located approximately 2,000 light years from Earth. Photo Credit: (NASA/Paul E. Alers)

Kepler Media Briefing

NASA Image and Video Library

2009-02-19

Jon Morse, Director, Astrophysics Division, at NASA Headquarters, left, talks about the Kepler mission during a media briefing, Thursday, Feb. 19, 2008, at NASA Headquarters in Washington. Morse was joined at the briefing by William Borucki, principal investigator for Kepler Science at Ames Research Center, second left, Jim Fanson, Kepler Project Manager at the Jet Propulsion Laboratory and Debra Fischer, professor of Astronomy at San Francisco State University, right. Kepler is scheduled to launch on March 5, 2009 from Cape Canaveral Air Force Station, Fla. aboard a Delta II rocket. Photo Credit: (NASA/Paul. E. Alers)

The 1980-90 shuttle star catalog for onboard and ground programs

NASA Technical Reports Server (NTRS)

Richardson, S.; Killen, R.

1978-01-01

The 1980-90 shuttle star catalog for onboard and ground programs is presented. The data used in this catalog are explained according to derivation, input, format for the catalog, and preparation. The tables include the computer program listing, input star position, and the computed star positions for the years 1980-90.

Kepler Media Briefing

NASA Image and Video Library

2009-02-19

William Borucki, principal investigator for Kepler Science at Ames Research Center, Moffett Field, Calif.,, second from left, talks about the Kepler mission during a media briefing, Thursday, Feb. 19, 2008, at NASA Headquarters in Washington. Kepler, the first mission with the ability to find planets like earth, is scheduled to launch on March 5, 2009 from Cape Canaveral Air Force Station, Fla. aboard a Delta II rocket. Joining Borucki at the briefing were Jon Morse, director, Astrophysics Division, NASA Headquarters, Jim Fanson, Kepler project manager at the Jet Propulsion Laboratory and Debra Fischer, a professor of Astronomy at San Francisco State University. Photo Credit: (NASA/Paul. E. Alers)

Kepler Media Briefing

NASA Image and Video Library

2009-02-19

Jim Fanson, Kepler project manager, right, talks about the Kepler mission as William Borucki, left, listens during a media briefing, Thursday, Feb. 19, 2008, at NASA Headquarters in Washington. Kepler, the first mission with the ability to find planets like earth, is scheduled to launch on March 5, 2009 from Cape Canaveral Air Force Station, Fla. aboard a Delta II rocket. Photo Credit: (NASA/Paul. E. Alers)

Kepler Media Briefing

NASA Image and Video Library

2009-02-19

Jim Fanson, Kepler project manager, at NASA's Jet Propulsion Laboratory in Pasadena, Calif. talks about the Kepler mission during a media briefing, Thursday, Feb. 19, 2008, at NASA Headquarters in Washington. Kepler, the first mission with the ability to find planets like earth, is scheduled to launch on March 5, 2009 from Cape Canaveral Air Force Station, Fla. aboard a Delta II rocket. Photo Credit: (NASA/Paul. E. Alers)

Kepler Media Briefing

NASA Image and Video Library

2009-02-19

William Borucki, principal investigator for Kepler Science at Ames Research Center, Moffett Field, Calif., talks about the Kepler mission during a media briefing, Thursday, Feb. 19, 2008, at NASA Headquarters in Washington. Kepler, the first mission with the ability to find planets like earth, is scheduled to launch on March 5, 2009 from Cape Canaveral Air Force Station, Fla. aboard a Delta II rocket. Photo Credit: (NASA/Paul. E. Alers)

Kepler Media Briefing

NASA Image and Video Library

2009-02-19

Jim Fanson, Kepler project manager, center, talks about the Kepler mission as William Borucki, left, and Debra Fischer, right, listen during a media briefing, Thursday, Feb. 19, 2008, at NASA Headquarters in Washington. Kepler, the first mission with the ability to find planets like earth, is scheduled to launch on March 5, 2009 from Cape Canaveral Air Force Station, Fla. aboard a Delta II rocket. Photo Credit: (NASA/Paul. E. Alers)

Kepler Press Conference

NASA Image and Video Library

2009-08-05

William Bo-Ricki, Kepler principal investigator at NASA's Ames Research Center, speaks during a press conference, Thursday, Aug. 6, 2009, at NASA Headquarters in Washington about the scientific observations coming from the Kepler spacecraft that was launched this past March. Kepler is NASA's first mission that is capable of discovering earth-sized planets in the habitable zones of stars like our Sun. Photo Credit: (NASA/Paul E. Alers)

Potential Habitable Zone Exomoon Candidates and Radial Velocity Estimates for Giant Kepler HZ Candidates.

NASA Astrophysics Data System (ADS)

Hill, M.; Kane, S.; Kopparapu, R.; Seperuelo Duarte, E.; Gelino, D.; Whittenmyer, R.

2017-12-01

The NASA Kepler mission has discovered thousands of new planetary candidates, many of which have been confirmed through follow-up observations. A primary goal of the mission is to determine the occurrence rate of terrestrial-size planets within the Habitable Zone (HZ) of their host stars. A major product of the Habitable Zone Working Group (HZWG) is a list of HZ exoplanet candidates from the Kepler Data Release 24 Q1- Q17 data vetting process [1]. We used a variety of criteria regarding HZ boundaries and planetary sizes to produce complete lists of HZ candidates, including a catalog of 104 candidates within the optimistic HZ. We cross-matched our HZ candidates with the Data Release 25 stellar properties and confirmed planet properties to provide robust stellar parameters and candidate dispositions. We also performed dynamical analysis simulations for multi-planet systems that contain candidates with radii less than two Earth radii as a step toward validation of those systems. From this list we found 39 planet candidates greater than 3 earth radii residing in the Optimistic Habitable Zone of their host star. While giant planets are not favored in the search for eta Earth, they do indicate a potential for large, potentially rocky moons residing in the habitable zone. These giant planets can also provide a potential for a wider range of "habitable" incident flux due to additional energy sources from tidal energy, etc. Thus we analyzed each giant planet, estimating their mass and then calculating the estimated Radial Velocity Semi Amplitudes of each planet for use in follow up observations. We then calculated the planets Hill radius and determined the maximum angular separation of potential moons. This presentation will describe the highlights of the HZ catalog giant planets and the plans for further validation of HZ candidates and follow-up studies. Fig. 1 - Plots both the unconfirmed and confirmed Giant (>3⊕R) Kepler candidates expected Radial Velocity signatures

Kepler Discovery

NASA Image and Video Library

2011-02-02

Jack Lissauer, a planetary scientist and a Kepler science team member at NASA's Ames Research Center, speaks during a news conference, Wednesday, Feb. 2, 2010, at NASA Headquarters in Washington. Scientists using NASA's Kepler, a space telescope, recently discovered six planets made of a mix of rock and gases orbiting a single sun-like star, known as Kepler-11, which is located approximately 2,000 light years from Earth. "It’s amazingly compact, it’s amazingly flat, there’s an amazingly large number of big planets orbiting close to their star - we didn’t know such systems could even exist," he said. Photo Credit: (NASA/Paul E. Alers)

Kepler Discovery

NASA Image and Video Library

2011-02-02

Jack Lissauer, a planetary scientist and a Kepler science team member at NASA's Ames Research Center, speaks during a news conference, Wednesday, Feb. 2, 2010, at NASA Headquarters in Washington. Scientists using NASA's Kepler, a space telescope, recently discovered six planets made of a mix of rock and gases orbiting a single sun-like star, known as Kepler-11, which is located approximately 2,000 light years from Earth."It’s amazingly compact, it’s amazingly flat, there’s an amazingly large number of big planets orbiting close to their star - we didn’t know such systems could even exist." Photo Credit: (NASA/Paul E. Alers)

VizieR Online Data Catalog: Minima of 41 binaries from entire Kepler mission (Gies+, 2015)

NASA Astrophysics Data System (ADS)

Gies, D. R.; Matson, R. A.; Guo, Z.; Lester, K. V.; Orosz, J. A.; Peters, G. J.

2016-06-01

We embarked on a search for eclipse timing variations among a subset of 41 eclipsing binaries that were identified prior to the start of Kepler observations (see our first paper, Gies et al. 2012, cat. J/AJ/143/137). Our first paper documented the eclipse times in observations made over quarters Q0-Q9 (2009.3-2011.5). Now with the Kepler mission complete with observations through Q17 (ending 2013.4), we present here the eclipse timings for our sample of 41 binaries over the entire duration of the mission. The associated times given in our first paper were based upon UTC (Coordinated Universal Time) while the current set uses TDB (Barycentric Dynamical Time), and here we report the times in reduced Barycentric Julian Date (BJD-2400000 days). We used the Simple Aperture Photometry (SAP) flux except in the case of KIC04678873. The list of targets appears in Table1. The eclipse timing measurements were made in almost the same way as described in our first paper. Our measurements appear in Table2. (2 data files).

Transiting circumbinary planets Kepler-34 b and Kepler-35 b

DOE Office of Scientific and Technical Information (OSTI.GOV)

Welsh, William F.; Orosz, Jerome A.; Carter, Joshua A.

Most Sun-like stars in the Galaxy reside in gravitationally-bound pairs of stars called 'binary stars'. While long anticipated, the existence of a 'circumbinary planet' orbiting such a pair of normal stars was not definitively established until the discovery of Kepler-16. Incontrovertible evidence was provided by the miniature eclipses ('transits') of the stars by the planet. However, questions remain about the prevalence of circumbinary planets and their range of orbital and physical properties. Here we present two additional transiting circumbinary planets, Kepler-34 and Kepler-35. Each is a low-density gas giant planet on an orbit closely aligned with that of its parentmore » stars. Kepler-34 orbits two Sun-like stars every 289 days, while Kepler-35 orbits a pair of smaller stars (89% and 81% of the Sun's mass) every 131 days. Due to the orbital motion of the stars, the planets experience large multi-periodic variations in incident stellar radiation. The observed rate of circumbinary planets implies > ~1% of close binary stars have giant planets in nearly coplanar orbits, yielding a Galactic population of at least several million.« less

Kepler Press Conference

NASA Image and Video Library

2009-08-05

Jon Morse, NASA's Astrophysics Division Director, left, speaks during a press conference, Thursday, Aug. 6, 2009, at NASA Headquarters in Washington about the scientific observations coming from the Kepler spacecraft that was launched this past March asWilliam Bo-Ricki, Kepler principal investigator at NASA's Ames Research Center, looks on. Kepler is NASA's first mission that is capable of discovering earth-sized planets in the habitable zones of stars like our Sun. Photo Credit: (NASA/Paul E. Alers)

VizieR Online Data Catalog: Kepler-10 RV measurements by HARPS-N (Dumusque+, 2014)

NASA Astrophysics Data System (ADS)

Dumusque, X.; Bonomo, A. S.; Haywood, R. D.; Malavolta, L.; Segransan, D.; Buchhave, L. A.; Collier, Cameron A.; Latham, D. W.; Molinari, E.; Pepe, F.; Udry, S.; Charbonneau, D.; Cosentino, R.; Dressing, C. D.; Figueira, P.; Fiorenzano, A. F. M.; Gettel, S.; Harutyunyan, A.; Horne, K.; Lopez-Morales, M.; Lovis, C.; Mayor, M.; Micela, G.; Motalebi, F.; Nascimbeni, V.; Phillips, D. F.; Piotto, G.; Pollacco, D.; Queloz, D.; Rice, K.; Sasselov, D.; Sozzetti, A.; Szentgyorgyi, A.; Watson, C.

2017-03-01

We monitored the RV variation of Kepler-10 with the HARPS-N spectrograph installed on the 3.57-m Telescopio Nazionale Galileo at the Spanish Observatorio del Roque de los Muchachos, La Palma Island, Spain (Cosentino et al. 2012SPIE.8446E..1VC). This instrument is an updated version of the original HARPS planet hunter installed on the 3.6-m telescope at the European Southern Observatory on La Silla, Chile (Mayor et al. 2003Msngr.114...20M). Just like its older brother, the HARPS-N instrument is an ultra-stable fiber-fed high-resolution (R = 115,000) optical echelle spectrograph optimized for the measurement of very precise RVs. The use of a more modern monolithic 4kx4k CCD enclosed in a more temperature stable cryostat, and the use of octagonal fibers for a better scrambling of the incoming light fed into the spectrograph should improve the precision of the instrument compared to HARPS. Scientific operations began at HARPS-N in 2012 August. Over the first two observing seasons, we obtained 157 RV measurements of Kepler-10. Four observations that were obtained during bad weather conditions had very low signal to noise (S/N, <10) and were rejected. (1 data file).

Kepler's mathematization of Cosmology

NASA Astrophysics Data System (ADS)

Field, Judith V.

The paper concerns with mathematical knowledge of Johannes Kepler. A part of the paper describes the mathematical education of Kepler which includes the Euclidean geometry and texts by Ptolemy. The first He knew from the Proclus' Commentary which was published in 1533. The author is pointing out that Kepler's epistemology was close to Plato's. The "polyhedral archetype" is discussed in detail. The greatest error was in the case of Mercury (~20%) Kepler's reaction was otherwise absolutely what one would exopect of a theoretician in the twentieth century: he suggested that better observations would imoprouve matter. The author make an analogy with modern discussions on metal abundances in the outer layers of old stars. The author is mentioning also that the Kepler's version of Copernicus' system is noticeably different from Copernicus' original one, including important improvements.

Kepler Press Conference

NASA Image and Video Library

2009-08-05

William Bo-Ricki, Kepler principal investigator at NASA's Ames Research Center, second from left, speaks during a press conference, Thursday, Aug. 6, 2009, at NASA Headquarters in Washington about the scientific observations coming from the Kepler spacecraft that was launched this past March as Jon Morse, NASA's Astrophysics Division Director, left, looks on. Kepler is NASA's first mission that is capable of discovering earth-sized planets in the habitable zones of stars like our Sun. Photo Credit: (NASA/Paul E. Alers)

Kepler Press Conference

NASA Image and Video Library

2009-08-05

William Bo-Ricki, Kepler principal investigator at NASA's Ames Research Center, second from left, is joined by Jon Morse, left, Sara Seager, and Alan Boss while speaking at a press conference, Thursday, Aug. 6, 2009, at NASA Headquarters in Washington about the scientific observations coming from the Kepler spacecraft that was launched this past March. Kepler is NASA's first mission that is capable of discovering earth-sized planets in the habitable zones of stars like our Sun. Photo Credit: (NASA/Paul E. Alers)

Kepler Media Briefing

NASA Image and Video Library

2009-02-19

William Borucki, principal investigator for Kepler Science at Ames Research Center, Moffett Field, Calif., second from left, is seen through a television camer monitor as he talks about the Kepler mission during a media briefing, Thursday, Feb. 19, 2008, at NASA Headquarters in Washington. Kepler, the first mission with the ability to find planets like earth, is scheduled to launch on March 5, 2009 from Cape Canaveral Air Force Station, Fla. aboard a Delta II rocket. Photo Credit: (NASA/Paul. E. Alers)

Kepler Science Operations Center Architecture

NASA Technical Reports Server (NTRS)

Middour, Christopher; Klaus, Todd; Jenkins, Jon; Pletcher, David; Cote, Miles; Chandrasekaran, Hema; Wohler, Bill; Girouard, Forrest; Gunter, Jay P.; Uddin, Kamal;

Kepler Confirms First Earth-Sized Planet Outside Our Solar System (Kepler-20) (Reporter Package)

NASA Image and Video Library

2011-12-19

NASA's Kepler mission has confirmed the discovery of the first Earth-size planets outside our solar system orbiting a sun-like star. Located about 1,000 light years from Earth, the Kepler-20 solar system has five planets orbiting a star similar to the Sun. Kepler-20f, the 4th planet in the system, is about 90 percent the size of Earth. Kepler-20f is slightly larger than Earth,with a radius that is 3 percent larger.

Variability Properties of Four Million Sources in the TESS Input Catalog Observed with the Kilodegree Extremely Little Telescope Survey

NASA Astrophysics Data System (ADS)

Oelkers, Ryan J.; Rodriguez, Joseph E.; Stassun, Keivan G.; Pepper, Joshua; Somers, Garrett; Kafka, Stella; Stevens, Daniel J.; Beatty, Thomas G.; Siverd, Robert J.; Lund, Michael B.; Kuhn, Rudolf B.; James, David; Gaudi, B. Scott

2018-01-01

The Kilodegree Extremely Little Telescope (KELT) has been surveying more than 70% of the celestial sphere for nearly a decade. While the primary science goal of the survey is the discovery of transiting, large-radii planets around bright host stars, the survey has collected more than 106 images, with a typical cadence between 10–30 minutes, for more than four million sources with apparent visual magnitudes in the approximate range 7< V< 13. Here, we provide a catalog of 52,741 objects showing significant large-amplitude fluctuations likely caused by stellar variability, as well as 62,229 objects identified with likely stellar rotation periods. The detected variability ranges in rms-amplitude from ∼3 mmag to ∼2.3 mag, and the detected periods range from ∼0.1 to ≳2000 days. We provide variability upper limits for all other ∼4,000,000 sources. These upper limits are principally a function of stellar brightness, but we achieve typical 1σ sensitivity on 30 min timescales down to ∼5 mmag at V∼ 8, and down to ∼43 mmag at V∼ 13. We have matched our catalog to the TESS Input catalog and the AAVSO Variable Star Index to precipitate the follow-up and classification of each source. The catalog is maintained as a living database on the Filtergraph visualization portal at the URL https://filtergraph.com/kelt_vars.

Advances in the Kepler Transit Search Engine and Automated Approaches to Identifying Likely Planet Candidates in Transit Surveys

NASA Astrophysics Data System (ADS)

Jenkins, Jon Michael

2015-08-01

Twenty years ago, no planets were known outside our own solar system. Since then, the discoveries of ~1500 exoplanets have radically altered our views of planets and planetary systems. This revolution is due in no small part to the Kepler Mission, which has discovered >1000 of these planets and >4000 planet candidates. While Kepler has shown that small rocky planets and planetary systems are quite common, the quest to find Earth’s closest cousins and characterize their atmospheres presses forward with missions such as NASA Explorer Program’s Transiting Exoplanet Survey Satellite (TESS) slated for launch in 2017 and ESA’s PLATO mission scheduled for launch in 2024.These future missions pose daunting data processing challenges in terms of the number of stars, the amount of data, and the difficulties in detecting weak signatures of transiting small planets against a roaring background. These complications include instrument noise and systematic effects as well as the intrinsic stellar variability of the subjects under scrutiny. In this paper we review recent developments in the Kepler transit search pipeline improving both the yield and reliability of detected transit signatures.Many of the phenomena in light curves that represent noise can also trigger transit detection algorithms. The Kepler Mission has expended great effort in suppressing false positives from its planetary candidate catalogs. While over 18,000 transit-like signatures can be identified for a search across 4 years of data, most of these signatures are artifacts, not planets. Vetting all such signatures historically takes several months’ effort by many individuals. We describe the application of machine learning approaches for the automated vetting and production of planet candidate catalogs. These algorithms can improve the efficiency of the human vetting effort as well as quantifying the likelihood that each candidate is truly a planet. This information is crucial for obtaining valid planet

LANDSAT: Non-US standard catalog no. N-33

NASA Technical Reports Server (NTRS)

1975-01-01

A catalog used for dissemination of information regarding the availability of LANDSAT imagery is presented. The Image Processing Facility of the Goddard Space Flight Center, publishes a U.S. and a Non-U.S. Standard Catalog on a monthly schedule, and the catalogs identify imagery which has been processed and input to the data files during the referenced month. The U.S. Standard Catalog includes imagery covering the continental United States, Alaska and Hawaii; the Non-U.S. Catalog identifies all the remaining coverage. Imagery adjacent to the continental U.S. and Alaska borders is included in the U.S. Standard Catalog.

DES Science Portal: II- Creating Science-Ready Catalogs

DOE Office of Scientific and Technical Information (OSTI.GOV)

Fausti Neto, Angelo; et al.

We present a novel approach for creating science-ready catalogs through a software infrastructure developed for the Dark Energy Survey (DES). We integrate the data products released by the DES Data Management and additional products created by the DES collaboration in an environment known as DES Science Portal. Each step involved in the creation of a science-ready catalog is recorded in a relational database and can be recovered at any time. We describe how the DES Science Portal automates the creation and characterization of lightweight catalogs for DES Year 1 Annual Release, and show its flexibility in creating multiple catalogs withmore » different inputs and configurations. Finally, we discuss the advantages of this infrastructure for large surveys such as DES and the Large Synoptic Survey Telescope. The capability of creating science-ready catalogs efficiently and with full control of the inputs and configurations used is an important asset for supporting science analysis using data from large astronomical surveys.« less

Kepler's "War on Mars"

NASA Astrophysics Data System (ADS)

Dorsey, William; Orchiston, W.; Stephenson, F. R.

2011-01-01

This paper presents an interpretation of how Johannes Kepler changed the study of astronomy. We propose that in his metaphorical "War on Mars,” the Astronomia Nova, Kepler used a revolutionary rhetoric to bring about the usurpation of seventeenth-century astronomy. We discuss how Kepler approached the well-established conceptual framework within which the hypotheses of Ptolemy, Copernicus and Tycho Brahe functioned, and how he sought comprehensive physical principles that could determine the true cause and form of the known Universe. We examine Kepler's need to redefine reality and his use of rhetoric in shaping his astronomical argument for a new astronomy, and we show that his new `laws’ represent a fusion of physics and geometry based upon astronomical observations. We suggest that although Kepler may have believed in and defended some Copernican ideas, his innovative Astronomia Nova opened up a whole new vista for international astronomy.

Flare Rate and Statistics for the M Dwarf GJ 1243 With Kepler

NASA Astrophysics Data System (ADS)

Johnson, Emily; Davenport, James R. A.; Hawley, Suzanne L.

2015-01-01

Light curve data taken from the Kepler space telescope have been used to detect stellar flares. These data are a valuable resource for the study of flare rates and morphology, but currently flare samples must be validated by hand. FBEye (Flares By Eye) is an interactive program created to detect and manually validate these flares, with the goal of removing the need for human input. As a first year undergraduate student, I participated in this project by analyzing Kepler light curves and vetting stellar flares. Using 11 months of one-minute cadence data from GJ 1243, an M dwarf star, we classified each flare by energy and morphology. This work has been used to refine the FBEye program, which will eventually be applied to the entire catalogue of Kepler data. It is also part of a research paper on GJ 1243, which is currently in the publication process.

A Computer System for a Union Catalog: Theme and Variations *

PubMed Central

Felter, Jacqueline W.; Tjoeng, Djoeng S.

1965-01-01

This article describes a computer system for the generation and maintenance of a union catalog of periodicals and for printouts of both the entire file and selected portions. Although the system was designed to meet the specifications of the Union Catalog of Medical Periodicals of New York, its use is not limited. Only the basic file maintenance program is indispensable; the subsidiary programs may be used as needed. The scope and content of the catalog are determined by the input. The preparation of the input is described in detail, with comment on the keypunching of library records. Applications to other kinds of catalogs are suggested. PMID:14271111

Kepler-1647b: The Largest and Longest-period Kepler Transiting Circumbinary Planet

NASA Astrophysics Data System (ADS)

Kostov, Veselin B.; Orosz, Jerome A.; Welsh, William F.; Doyle, Laurance R.; Fabrycky, Daniel C.; Haghighipour, Nader; Quarles, Billy; Short, Donald R.; Cochran, William D.; Endl, Michael; Ford, Eric B.; Gregorio, Joao; Hinse, Tobias C.; Isaacson, Howard; Jenkins, Jon M.; Jensen, Eric L. N.; Kane, Stephen; Kull, Ilya; Latham, David W.; Lissauer, Jack J.; Marcy, Geoffrey W.; Mazeh, Tsevi; Müller, Tobias W. A.; Pepper, Joshua; Quinn, Samuel N.; Ragozzine, Darin; Shporer, Avi; Steffen, Jason H.; Torres, Guillermo; Windmiller, Gur; Borucki, William J.

2016-08-01

We report the discovery of a new Kepler transiting circumbinary planet (CBP). This latest addition to the still-small family of CBPs defies the current trend of known short-period planets orbiting near the stability limit of binary stars. Unlike the previous discoveries, the planet revolving around the eclipsing binary system Kepler-1647 has a very long orbital period (˜1100 days) and was at conjunction only twice during the Kepler mission lifetime. Due to the singular configuration of the system, Kepler-1647b is not only the longest-period transiting CBP at the time of writing, but also one of the longest-period transiting planets. With a radius of 1.06 ± 0.01 R Jup, it is also the largest CBP to date. The planet produced three transits in the light curve of Kepler-1647 (one of them during an eclipse, creating a syzygy) and measurably perturbed the times of the stellar eclipses, allowing us to measure its mass, 1.52 ± 0.65 M Jup. The planet revolves around an 11-day period eclipsing binary consisting of two solar-mass stars on a slightly inclined, mildly eccentric (e bin = 0.16), spin-synchronized orbit. Despite having an orbital period three times longer than Earth’s, Kepler-1647b is in the conservative habitable zone of the binary star throughout its orbit.

Kepler Discovery

NASA Image and Video Library

2011-02-02

Debra Fischer, a professor of Astronomy at Yale University, speaks during a news conference, Wednesday, Feb. 2, 2010, at NASA Headquarters in Washington. Scientists using NASA's Kepler, a space telescope, recently discovered six planets made of a mix of rock and gases orbiting a single sun-like star, known as Kepler-11, which is located approximately 2,000 light years from Earth. Photo Credit: (NASA/Paul E. Alers)

Improving SysSim's Planetary Occurrence Rate Estimates

NASA Astrophysics Data System (ADS)

Ashby, Keir; Ragozzine, Darin; Hsu, Danley; Ford, Eric B.

2017-10-01

Kepler's catalog of thousands of transiting planet candidates enables statistical characterization of the underlying planet occurrence rates as a function of period and radius. Due to geometric factors and general noise in measurements, we know that many planets--especially those with a small-radius and/or long-period--were not observed by Kepler.To account for Kepler's detection criteria, Hsu et al. 2017 expanded on work in Lissuaer et al. 2011 to develop the Planetary System Simulator or "SysSim". SysSim uses a forward model to generate simulated catalogs of exoplanet systems, determine which of those simulated planets would have been seen by Kepler in the presence of uncertainties, and then compares those “observed planets” to those actually seen by Kepler. It then uses Approximate Bayesian Computation to infer the posterior probability distributions of the input parameters used to generate the forward model. In Hsu et al. 2017, we focused on matching the observed frequency of planets by solving for the underlying occurrence rate for each bin in a 2-dimensional grid of radius and period. After summarizing the results of Hsu et al. 2017, we show new results that investigate the effect on occurrence rates from including more accurate completeness products (from the Kepler DR25 analysis) into SysSim.

Kepler Press Conference

NASA Image and Video Library

2009-08-05

William Bo-Ricki, Kepler principal investigator at NASA's Ames Research Center, second from left, speaks during a press conference, Thursday, Aug. 6, 2009, at NASA Headquarters in Washington about the scientific observations coming from the Kepler spacecraft that was launched this past March. Others seated include Jon Morse, NASA's Astrophysics Director, Sara Seager, Professor of Planetary Science and Physics at MIT, and Alan Boss, an Astrophysicist at the Carnegie Institution at the Department of Terrestrial Magnetism in Washington, right. Kepler is NASA's first mission that is capable of discovering earth-sized planets in the habitable zones of stars like our Sun. Photo Credit: (NASA/Paul E. Alers)

Prototype of Kepler Processing Workflows For Microscopy And Neuroinformatics

PubMed Central

Astakhov, V.; Bandrowski, A.; Gupta, A.; Kulungowski, A.W.; Grethe, J.S.; Bouwer, J.; Molina, T.; Rowley, V.; Penticoff, S.; Terada, M.; Wong, W.; Hakozaki, H.; Kwon, O.; Martone, M.E.; Ellisman, M.

2016-01-01

We report on progress of employing the Kepler workflow engine to prototype “end-to-end” application integration workflows that concern data coming from microscopes deployed at the National Center for Microscopy Imaging Research (NCMIR). This system is built upon the mature code base of the Cell Centered Database (CCDB) and integrated rule-oriented data system (IRODS) for distributed storage. It provides integration with external projects such as the Whole Brain Catalog (WBC) and Neuroscience Information Framework (NIF), which benefit from NCMIR data. We also report on specific workflows which spawn from main workflows and perform data fusion and orchestration of Web services specific for the NIF project. This “Brain data flow” presents a user with categorized information about sources that have information on various brain regions. PMID:28479932

The Kepler End-to-End Model: Creating High-Fidelity Simulations to Test Kepler Ground Processing

NASA Technical Reports Server (NTRS)

Bryson, Stephen T.; Jenkins, Jon M.; Peters, Dan J.; Tenenbaum, Peter P.; Klaus, Todd C.; Gunter, Jay P.; Cote, Miles T.; Caldwell, Douglas A.

2010-01-01

The Kepler mission is designed to detect the transit of Earth-like planets around Sun-like stars by observing 100,000 stellar targets. Developing and testing the Kepler ground-segment processing system, in particular the data analysis pipeline, requires high-fidelity simulated data. This simulated data is provided by the Kepler End-to-End Model (ETEM). ETEM simulates the astrophysics of planetary transits and other phenomena, properties of the Kepler spacecraft and the format of the downlinked data. Major challenges addressed by ETEM include the rapid production of large amounts of simulated data, extensibility and maintainability.

Kepler Detects Planet Orbiting Two Stars (Kepler-16b) Reporter Package for TWAN

NASA Image and Video Library

2011-09-19

NASA's Kepler Mission has made the first detection of a planet orbiting two stars. About 200 light years away from our solar system, the planet Kepler-16b is cold, gaseous and about the size of Saturn. Its stars are both smaller than the Sun and about 2 billion years younger than our Solar System. They orbit around each other, so from our vantage point they take turns eclipsing each other about every 41 days. The planet Kepler-16b orbits around both stars every 229 days.

Eccentric Companions to Kepler-448b and Kepler-693b: Clues to the Formation of Warm Jupiters

NASA Astrophysics Data System (ADS)

Masuda, Kento

2017-08-01

I report the discovery of non-transiting close companions to two transiting warm Jupiters (WJs), Kepler-448/KOI-12b (orbital period P=17.9 {days}, radius {R}{{p}}={1.23}-0.05+0.06 {R}{Jup}) and Kepler-693/KOI-824b (P=15.4 {days}, {R}{{p}}=0.91+/- 0.05 {R}{Jup}), via dynamical modeling of their transit timing and duration variations (TTVs and TDVs). The companions have masses of {22}-5+7 {M}{Jup} (Kepler-448c) and {150}-40+60 {M}{Jup} (Kepler-693c), and both are on eccentric orbits (e={0.65}-0.09+0.13 for Kepler-448c and e={0.47}-0.06+0.11 for Kepler-693c) with periastron distances of 1.5 {au}. Moderate eccentricities are detected for the inner orbits as well (e={0.34}-0.07+0.08 for Kepler-448b and e={0.2}-0.1+0.2 for Kepler-693b). In the Kepler-693 system, a large mutual inclination between the inner and outer orbits ({53}-9+7 \\deg or {134}-10+11 \\deg ) is also revealed by the TDVs. This is likely to induce a secular oscillation in the eccentricity of the inner WJ that brings its periastron close enough to the host star for tidal star-planet interactions to be significant. In the Kepler-448 system, the mutual inclination is weakly constrained, and such an eccentricity oscillation is possible for a fraction of the solutions. Thus these WJs may be undergoing tidal migration to become hot Jupiters (HJs), although the migration via this process from beyond the snow line is disfavored by the close-in and massive nature of the companions. This may indicate that WJs can be formed in situ and could even evolve into HJs via high-eccentricity migration inside the snow line.

Kepler Media Briefing

NASA Image and Video Library

2009-02-19

Jon Morse, director, Astrophysics Division at NASA Headquarters talks about the Kepler mission during a media briefing, Thursday, Feb. 19, 2008, at NASA Headquarters in Washington. Kepler, the first mission with the ability to find planets like earth, is scheduled to launch on March 5, 2009 from Cape Canaveral Air Force Station, Fla. aboard a Delta II rocket. Photo Credit: (NASA/Paul. E. Alers)

Kepler Media Briefing

NASA Image and Video Library

2009-02-19

Debra Fischer, a professor of Astronomy at San Francisco State University, talks about the Kepler mission during a media briefing, Thursday, Feb. 19, 2008, at NASA Headquarters in Washington. Kepler, the first mission with the ability to find planets like earth, is scheduled to launch on March 5, 2009 from Cape Canaveral Air Force Station, Fla. aboard a Delta II rocket. Photo Credit: (NASA/Paul. E. Alers)

Search for pulsations in M dwarfs in the Kepler short-cadence data base

NASA Astrophysics Data System (ADS)

Rodríguez, E.; Rodríguez-López, C.; López-González, M. J.; Amado, P. J.; Ocando, S.; Berdiñas, Z. M.

2016-04-01

The results of a search for stellar pulsations in M dwarf stars in the Kepler short-cadence (SC) data base are presented. This investigation covers all the cool and dwarf stars in the list of Dressing & Charbonneau, which were also observed in SC mode by the Kepler satellite. The sample has been enlarged via selection of stellar parameters (temperature, surface gravity and radius) with available Kepler Input Catalogue values together with JHK and riz photometry. In total, 87 objects observed by the Kepler mission in SC mode were selected and analysed using Fourier techniques. The detection threshold is below 10 μmag for the brightest objects and below 20 μmag for about 40 per cent of the stars in the sample. However, no significant signal in the [˜10,100] cd-1 frequency domain that can be reliably attributable to stellar pulsations has been detected. The periodograms have also been investigated for solar-like oscillations in the >100 cd-1 region, but with unsuccessful results too. Despite these inconclusive photometric results, M dwarfs pulsation amplitudes may still be detected in radial velocity searches. State-of-the-art coming instruments, like CARMENES near-infrared high-precision spectrograph, will play a key role in the possible detection.

Kepler Press Conference

NASA Image and Video Library

2009-08-05

Alan Boss, an astrophyscist at the Carnegie Institution at the Department of Terrestrial Magnetism speaks during a press conference, Thursday, Aug. 6, 2009, at NASA Headquarters in Washington about the scientific observations coming from the Kepler spacecraft that was launched this past March. Kepler is NASA's first mission that is capable of discovering earth-sized planets in the habitable zones of stars like our Sun. Photo Credit: (NASA/Paul E. Alers)

Kepler Press Conference

NASA Image and Video Library

2009-08-05

Sara Seager, Professor of Planetary Science at the Massachusetts Institute of Technology, speaks during a press conference, Thursday, Aug. 6, 2009, at NASA Headquarters in Washington about the scientific observations coming from the Kepler spacecraft that was launched this past March. Kepler is NASA's first mission that is capable of discovering earth-sized planets in the habitable zones of stars like our Sun. Photo Credit: (NASA/Paul E. Alers)

VizieR Online Data Catalog: Possible planets around A stars (Balona, 2014)

NASA Astrophysics Data System (ADS)

Balona, L. A.

2015-02-01

The Kepler Input Catalogue (KIC; Brown et al., 2011, Cat. V/133) provides estimates of effective temperature, surface gravity and radii for practically all stars in the Kepler field from ground-based multicolour photometry. The light curves for all Kepler A stars, i.e. stars with effective temperatures, Teff, in the range 7500

Search for Variables in the Kepler Field on DASCH Plates

NASA Astrophysics Data System (ADS)

Tang, Sumin; Grindlay, J.; Los, E.; Servillat, M.

2011-01-01

The Digital Access to a Sky Century @ Harvard (DASCH) is a project to digitize the half a million glass photographic plates over the period 1880s-1980s. This 100 year coverage is a unique resource for studying temporal variations in the universe. Here we present our variable search algorithms and variable catalog in the Kepler fields based on 3000 scanned plates. We use the KIC spectral classifications to search for long-term variability of any main sequence stars, particularly M dwarfs. We apply a variability search technique developed for DASCH and set limits on the fraction of main sequence stars, by spectral type, which show detectable (>0.2mag) variability on timescales 10-100y. Such limits are of particular interest for M dwarfs given the recent discoveries of their planet systems.

Johannes Kepler and his contribution to Applied Mathematics

NASA Astrophysics Data System (ADS)

Pichler, Franz

The worldwide renown of Johannes Kepler is based above all on his contribution to astronomy. The 3 Kepler's Laws relating to the planets are well known and will ensure that his name is remembered by future generations. Besides his astronomical work, Kepler also made important contributions in the fields of theology, physics, phylosophy and mathematics. The actual paper discusses the advances by Kepler in the application of mathematics to the solution of "real life problems". The author made a concise account of some of the disciples by Kepler: Klug, Wieleitner, Caspar, Hammer, paying particular attention to works published by Kepler while he was living in Linz (1612-1628). The Kepler's contribution to applied mathematics is an example supremely worthy of emulation, the author concludes.

Obliquity Variations of Habitable Zone Planets Kepler-62f and Kepler-186f

NASA Astrophysics Data System (ADS)

Shan, Yutong; Li, Gongjie

2018-06-01

Obliquity variability could play an important role in the climate and habitability of a planet. Orbital modulations caused by planetary companions and the planet’s spin axis precession due to the torque from the host star may lead to resonant interactions and cause large-amplitude obliquity variability. Here we consider the spin axis dynamics of Kepler-62f and Kepler-186f, both of which reside in the habitable zone around their host stars. Using N-body simulations and secular numerical integrations, we describe their obliquity evolution for particular realizations of the planetary systems. We then use a generalized analytic framework to characterize regions in parameter space where the obliquity is variable with large amplitude. We find that the locations of variability are fine-tuned over the planetary properties and system architecture in the lower-obliquity regimes (≲40°). As an example, assuming a rotation period of 24 hr, the obliquities of both Kepler-62f and Kepler-186f are stable below ∼40°, whereas the high-obliquity regions (60°–90°) allow moderate variabilities. However, for some other rotation periods of Kepler-62f or Kepler-186f, the lower-obliquity regions could become more variable owing to resonant interactions. Even small deviations from coplanarity (e.g., mutual inclinations ∼3°) could stir peak-to-peak obliquity variations up to ∼20°. Undetected planetary companions and/or the existence of a satellite could also destabilize the low-obliquity regions. In all cases, the high-obliquity region allows for moderate variations, and all obliquities corresponding to retrograde motion (i.e., >90°) are stable.

The host stars of Kepler's habitable exoplanets: superflares, rotation and activity

NASA Astrophysics Data System (ADS)

Armstrong, D. J.; Pugh, C. E.; Broomhall, A.-M.; Brown, D. J. A.; Lund, M. N.; Osborn, H. P.; Pollacco, D. L.

2016-01-01

We embark on a detailed study of the light curves of Kepler's most Earth-like exoplanet host stars using the full length of Kepler data. We derive rotation periods, photometric activity indices, flaring energies, mass-loss rates, gyrochronological ages, X-ray luminosities and consider implications for the planetary magnetospheres and habitability. Furthermore, we present the detection of superflares in the light curve of Kepler-438, the exoplanet with the highest Earth Similarity Index to date. Kepler-438b orbits at a distance of 0.166 au to its host star, and hence may be susceptible to atmospheric stripping. Our sample is taken from the Habitable Exoplanet Catalogue, and consists of the stars Kepler-22, Kepler-61, Kepler-62, Kepler-174, Kepler-186, Kepler-283, Kepler-296, Kepler-298, Kepler-438, Kepler-440, Kepler-442, Kepler-443 and KOI-4427, between them hosting 15 of the most habitable transiting planets known to date from Kepler.

VizieR Online Data Catalog: Orbital parameters of 341 new binaries (Murphy+, 2018)

NASA Astrophysics Data System (ADS)

Murphy, S. J.; Moe, M.; Kurtz, D. W.; Bedding, T.; Shibahashi, H.; Boffin, H. M. J.

2018-01-01

Kepler targets with effective temperatures between 6600 and 10000K have been investigated for pulsational phase modulation that can be attributed to binary orbital motion. For each target, we provide a binary status, which also reflects whether or not the target pulsates. For the binary systems, we provide the Kepler Input Catalogue (KIC) number, as well as the binary orbital elements: the period, semi-major axis, eccentricity, longitude of periastron, time of periastron passage, binary mass function and a calculated radial velocity semi-amplitude. (3 data files).

ROTATION PERIODS OF WIDE BINARIES IN THE KEPLER FIELD

DOE Office of Scientific and Technical Information (OSTI.GOV)

Janes, K. A.

In a search of proper motion catalogs for common proper motion stars in the field of the Kepler spacecraft I identified 93 likely binary systems. A comparison of their rotation periods is a test of the gyrochronology concept. To find their periods I calculated the autocorrelation function (ACF) of the Kepler mission photometry for each star. In most systems for which good periods can be found, the cooler star has a longer period than the hotter component, in general agreement with models. However, there is a wide range in the gradients of lines connecting binary pairs in a period–color diagram.more » Furthermore, near the solar color, only a few stars have longer periods than the Sun, suggesting that they, and their cooler companions, are not much older than the Sun. In addition, there is an apparent gap at intermediate periods in the period distribution of the late K and early M stars. Either star formation in this direction has been variable, or stars evolve in period at a non-uniform rate, or some stars evolve more rapidly than others at the same mass. Finally, using the ACF as a measure of the activity level, I found that while the F, G, and early K stars become less active as their periods increase, there is no correlation between period and activity for the mid K to early M stars.« less

VizieR Online Data Catalog: Catalog of Earth-Like Exoplanet Survey Targets (Chandler+, 2016)

NASA Astrophysics Data System (ADS)

Chandler, C. O.; McDonald, I.; Kane, S. R.

2016-07-01

We present the Catalog of Earth-Like Exoplanet Survey Targets (CELESTA), a database of habitable zones around 37000 nearby stars. The first step in creating CELESTA was assembling the input data. The Revised Hipparcos Catalog (van Leeuwen 2007, Cat. I/311) is a stellar catalog based on the original Hipparcos mission (Perryman et al. 1997, Cat. I/239) data set. Hipparcos, launched in 1989, recorded with great precision the parallax of nearby stars, ultimately leading to a database of 118218 stars. McDonald et al. 2012 (cat. J/MNRAS/427/343) calculated effective temperatures and luminosities for the Hipparcos stars. The next step was selecting appropriate stars for the construction of CELESTA. The Stellar Parameter Catalog of 103663 stars included many stars that were not suitable for our purposes, especially stars off the Main-Sequence (MS) branch, e.g., giants. Please refer to Section 3.2 in the paper for additional details about the star selection. The final CELESTA catalog contains 37354 stars (see Table2), each with a set of associated attributes, e.g., estimated mass, measured distance. The complete database can also be found online at a dedicated host (http://www.celesta.info/). (2 data files).

Kepler AutoRegressive Planet Search

NASA Astrophysics Data System (ADS)

Feigelson, Eric

NASA's Kepler mission is the source of more exoplanets than any other instrument, but the discovery depends on complex statistical analysis procedures embedded in the Kepler pipeline. A particular challenge is mitigating irregular stellar variability without loss of sensitivity to faint periodic planetary transits. This proposal presents a two-stage alternative analysis procedure. First, parametric autoregressive ARFIMA models, commonly used in econometrics, remove most of the stellar variations. Second, a novel matched filter is used to create a periodogram from which transit-like periodicities are identified. This analysis procedure, the Kepler AutoRegressive Planet Search (KARPS), is confirming most of the Kepler Objects of Interest and is expected to identify additional planetary candidates. The proposed research will complete application of the KARPS methodology to the prime Kepler mission light curves of 200,000: stars, and compare the results with Kepler Objects of Interest obtained with the Kepler pipeline. We will then conduct a variety of astronomical studies based on the KARPS results. Important subsamples will be extracted including Habitable Zone planets, hot super-Earths, grazing-transit hot Jupiters, and multi-planet systems. Groundbased spectroscopy of poorly studied candidates will be performed to better characterize the host stars. Studies of stellar variability will then be pursued based on KARPS analysis. The autocorrelation function and nonstationarity measures will be used to identify spotted stars at different stages of autoregressive modeling. Periodic variables with folded light curves inconsistent with planetary transits will be identified; they may be eclipsing or mutually-illuminating binary star systems. Classification of stellar variables with KARPS-derived statistical properties will be attempted. KARPS procedures will then be applied to archived K2 data to identify planetary transits and characterize stellar variability.

Atmospheres of Two Super-Puffs: Transmission Spectra of Kepler 51b and Kepler 51d

NASA Astrophysics Data System (ADS)

Roberts, Jessica; Berta-Thompson, Zachory K.; Desert, Jean-Michel; Deck, Katherine; Fabrycky, Daniel; Fortney, Jonathan J.; Line, Michael R.; Lopez, Eric; Masuda, Kento; Morley, Caroline; Sanchis Ojeda, Roberto; Winn, Joshua N.

2018-06-01

The Kepler 51 system hosts three transiting, extremely low-mass, low-density exoplanets. These planets orbit a young G type star at periods of 45, 85 and 130 days, placing them outside of the regime for the inflated hot-Jupiters. Instead, the Kepler 51 planets are part of a rare class of exoplanets: the super-puffs. Models suggest these H/He-rich planets formed outside of the snow-line and migrated inwards, which might imply abundant water in their atmospheres. Because Kepler 51b and 51d have low surface gravities, they also have scale heights 10x larger than a typical hot-Jupiter, making them prime targets for atmospheric investigation. Kepler 51c, while also possessing a large scale height, only grazes its star during transit. We are also presented with a unique opportunity to study two super-puffs in very different temperature regimes around the same star. Therefore, we observed two transits each of both Kepler 51b and 51d with the Hubble Space Telescope’s Wide Field Camera 3 G141 grism spectroscopy. Using these data we created spectroscopic light curves that allow us to compute a transmission spectrum for each planet. We conclude that both planets have a flat transmission spectrum with a precision better than 0.6 scale heights between 1.1 and 1.7 microns. We also analyzed the transit timing variations of each planet by combining re-fitted Kepler mid-transit times with our measured HST times. From these additional timing points, we are able to better constrain the planetary masses and the dynamics of the system. With these updated masses and revisited stellar parameters, we determine precise measurements on the densities of these planets. We will present these results as well as discuss the implications for high altitude aerosols in both Kepler 51b and 51d.

VizieR Online Data Catalog: LAMOST-Kepler MKCLASS spectral classification (Gray+, 2016)

NASA Astrophysics Data System (ADS)

Gray, R. O.; Corbally, C. J.; De Cat, P.; Fu, J. N.; Ren, A. B.; Shi, J. R.; Luo, A. L.; Zhang, H. T.; Wu, Y.; Cao, Z.; Li, G.; Zhang, Y.; Hou, Y.; Wang, Y.

2016-07-01

The data for the LAMOST-Kepler project are supplied by the Large Sky Area Multi Object Fiber Spectroscopic Telescope (LAMOST, also known as the Guo Shou Jing Telescope). This unique astronomical instrument is located at the Xinglong observatory in China, and combines a large aperture (4 m) telescope with a 5° circular field of view (Wang et al. 1996ApOpt..35.5155W). Our role in this project is to supply accurate two-dimensional spectral types for the observed targets. The large number of spectra obtained for this project (101086) makes traditional visual classification techniques impractical, so we have utilized the MKCLASS code to perform these classifications. The MKCLASS code (Gray & Corbally 2014AJ....147...80G, v1.07 http://www.appstate.edu/~grayro/mkclass/), an expert system designed to classify blue-violet spectra on the MK Classification system, was employed to produce the spectral classifications reported in this paper. MKCLASS was designed to reproduce the steps skilled human classifiers employ in the classification process. (2 data files).

Kepler Data Release 4 Notes

NASA Technical Reports Server (NTRS)

Van Cleve, Jeffrey (Editor); Jenkins, Jon; Caldwell, Doug; Allen, Christopher L.; Batalha, Natalie; Bryson, Stephen T.; Chandrasekaran, Hema; Clarke, Bruce D.; Cote, Miles T.; Dotson, Jessie L.;

The Kepler Full Frame Images

NASA Technical Reports Server (NTRS)

Dotson, Jessie L.; Batalha, Natalie; Bryson, Stephen T.; Caldwell, Douglas A.; Clarke, Bruce D.

2010-01-01

NASA's exoplanet discovery mission Kepler provides uninterrupted 1-min and 30-min optical photometry of a 100 square degree field over a 3.5 yr nominal mission. Downlink bandwidth is filled at these short cadences by selecting only detector pixels specific to 105 preselected stellar targets. The majority of the Kepler field, comprising 4 x 10(exp 6) m_v < 20 sources, is sampled at much lower 1-month cadence in the form of a full-frame image. The Full Frame Images (FFIs) are calibrated by the Science Operations Center at NASA Ames Research Center. The Kepler Team employ these images for astrometric and photometric reference but make the images available to the astrophysics community through the Multimission Archive at STScI (MAST). The full-frame images provide a resource for potential Kepler Guest Observers to select targets and plan observing proposals, while also providing a freely-available long-cadence legacy of photometric variation across a swathe of the Galactic disk.

RED GIANTS IN ECLIPSING BINARY AND MULTIPLE-STAR SYSTEMS: MODELING AND ASTEROSEISMIC ANALYSIS OF 70 CANDIDATES FROM KEPLER DATA

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gaulme, P.; McKeever, J.; Rawls, M. L.

2013-04-10

Red giant stars are proving to be an incredible source of information for testing models of stellar evolution, as asteroseismology has opened up a window into their interiors. Such insights are a direct result of the unprecedented data from space missions CoRoT and Kepler as well as recent theoretical advances. Eclipsing binaries are also fundamental astrophysical objects, and when coupled with asteroseismology, binaries provide two independent methods to obtain masses and radii and exciting opportunities to develop highly constrained stellar models. The possibility of discovering pulsating red giants in eclipsing binary systems is therefore an important goal that could potentiallymore » offer very robust characterization of these systems. Until recently, only one case has been discovered with Kepler. We cross-correlate the detected red giant and eclipsing-binary catalogs from Kepler data to find possible candidate systems. Light-curve modeling and mean properties measured from asteroseismology are combined to yield specific measurements of periods, masses, radii, temperatures, eclipse timing variations, core rotation rates, and red giant evolutionary state. After using three different techniques to eliminate false positives, out of the 70 systems common to the red giant and eclipsing-binary catalogs we find 13 strong candidates (12 previously unknown) to be eclipsing binaries, one to be a non-eclipsing binary with tidally induced oscillations, and 10 more to be hierarchical triple systems, all of which include a pulsating red giant. The systems span a range of orbital eccentricities, periods, and spectral types F, G, K, and M for the companion of the red giant. One case even suggests an eclipsing binary composed of two red giant stars and another of a red giant with a {delta}-Scuti star. The discovery of multiple pulsating red giants in eclipsing binaries provides an exciting test bed for precise astrophysical modeling, and follow-up spectroscopic observations

The Kepler Dichotomy in Planetary Disks: Linking Kepler Observables to Simulations of Late-stage Planet Formation

NASA Astrophysics Data System (ADS)

Moriarty, John; Ballard, Sarah

2016-11-01

NASA’s Kepler Mission uncovered a wealth of planetary systems, many with planets on short-period orbits. These short-period systems reside around 50% of Sun-like stars and are similarly prevalent around M dwarfs. Their formation and subsequent evolution is the subject of active debate. In this paper, we simulate late-stage, in situ planet formation across a grid of planetesimal disks with varying surface density profiles and total mass. We compare simulation results with observable characteristics of the Kepler sample. We identify mixture models with different primordial planetesimal disk properties that self-consistently recover the multiplicity, radius, period and period ratio, and duration ratio distributions of the Kepler planets. We draw three main conclusions. (1) We favor a “frozen-in” narrative for systems of short-period planets, in which they are stable over long timescales, as opposed to metastable. (2) The “Kepler dichotomy,” an observed phenomenon of the Kepler sample wherein the architectures of planetary systems appear to either vary significantly or have multiple modes, can naturally be explained by formation within planetesimal disks with varying surface density profiles. Finally, (3) we quantify the nature of the “Kepler dichotomy” for both GK stars and M dwarfs, and find that it varies with stellar type. While the mode of planet formation that accounts for high multiplicity systems occurs in 24% ± 7% of planetary systems orbiting GK stars, it occurs in 63% ± 16% of planetary systems orbiting M dwarfs.

Probability of the Physical Association of 104 Blended Companions to Kepler Objects of Interest Using Visible and Near-infrared Adaptive Optics Photometry

NASA Astrophysics Data System (ADS)

Atkinson, Dani; Baranec, Christoph; Ziegler, Carl; Law, Nicholas; Riddle, Reed; Morton, Tim

2017-01-01

We determine probabilities of physical association for stars in blended Kepler Objects of Interest (KOIs), and find that 14.5{ % }-3.4 % +3.8 % of companions within ˜4″ are consistent with being physically unassociated with their primary. This produces a better understanding of potential false positives in the Kepler catalog and will guide models of planet formation in binary systems. Physical association is determined through two methods of calculating multi-band photometric parallax using visible and near-infrared adaptive optics observations of 84 KOI systems with 104 contaminating companions within ˜4″. We find no evidence that KOI companions with separations of less than 1″ are more likely to be physically associated than KOI companions generally. We also reinterpret transit depths for 94 planet candidates, and calculate that 2.6% ± 0.4% of transits have R> 15{R}\\oplus , which is consistent with prior modeling work.

Extragalactic Science With Kepler

NASA Astrophysics Data System (ADS)

Fanelli, Michael N.; Marcum, P.

2012-01-01

Although designed as an exoplanet and stellar astrophysics experiment, the Kepler mission provides a unique capability to explore the essentially unknown photometric stability of galactic systems at millimag levels using Kepler's blend of high precision and continuous monitoring. Time series observations of galaxies are sensitive to both quasi-continuous variability, driven by accretion activity from embedded active nuclei, and random, episodic events, such as supernovae. In general, galaxies lacking active nuclei are not expected to be variable with the timescales and amplitudes observed in stellar sources and are free of source motions that affect stars (e.g., parallax). These sources can serve as a population of quiescent, non-variable sources, which may be used to quantify the photometric stability and noise characteristics of the Kepler photometer. A factor limiting galaxy monitoring in the Kepler FOV is the overall lack of detailed quantitative information for the galaxy population. Despite these limitations, a significant number of galaxies are being observed, forming the Kepler Galaxy Archive. Observed sources total approximately 100, 250, and 700 in Cycles 1-3 (Cycle 3 began in June 2011). In this poster we interpret the properties of a set of 20 galaxies monitored during quarters 4 through 8, their associated light curves, photometric and astrometric precision and potential variability. We describe data analysis issues relevant to extended sources and available software tools. In addition, we detail ongoing surveys that are providing new photometric and morphological information for galaxies over the entire field. These new datasets will both aid the interpretation of the time series, and improve source selection, e.g., help identify candidate AGNs and starburst systems, for further monitoring.

The Bulgarian Contribution to the Study of variable stars on observational data from the Kepler mission

NASA Astrophysics Data System (ADS)

Kjurkchieva, D. P.; Dimitrov, D. P.; Radeva, V. S.; Vasileva, D. L.; Atanasova, T. V.; Stateva, I. V.; Petrov, N. I.; Iliev, I. Kh.

2018-02-01

This review paper presents the results of investigations of variable stars obtained by Bulgarian astronomers based on observations of Kepler mission. The main contributions are: determination of orbits and global parameters of more than 100 binary stars; creation of the largest catalog of eccentric stars; identification of sixty new binaries with eccentricity over 0.5; discovery of 19 heartbeat stars; detailed investigation of the spot and flare activity of several binary stars; asteroseismic study of three pulsating stars; detection of deep transits of WD 1145+017 due to its disentangling planet system. The paper illustrates not only scientific significance but also educational and social impact of the work on these tasks.

Chemical Abundances of M-Dwarfs from the Apogee Survey. I. The Exoplanet Hosting Stars Kepler-138 and Kepler-186

DOE Office of Scientific and Technical Information (OSTI.GOV)

Souto, D.; Cunha, K.; García-Hernández, D. A.

2017-02-01

We report the first detailed chemical abundance analysis of the exoplanet-hosting M-dwarf stars Kepler-138 and Kepler-186 from the analysis of high-resolution ( R ∼ 22,500) H -band spectra from the SDSS-IV–APOGEE survey. Chemical abundances of 13 elements—C, O, Na, Mg, Al, Si, K, Ca, Ti, V, Cr, Mn, and Fe—are extracted from the APOGEE spectra of these early M-dwarfs via spectrum syntheses computed with an improved line list that takes into account H{sub 2}O and FeH lines. This paper demonstrates that APOGEE spectra can be analyzed to determine detailed chemical compositions of M-dwarfs. Both exoplanet-hosting M-dwarfs display modest sub-solar metallicities:more » [Fe/H]{sub Kepler-138} = −0.09 ± 0.09 dex and [Fe/H]{sub Kepler-186} = −0.08 ± 0.10 dex. The measured metallicities resulting from this high-resolution analysis are found to be higher by ∼0.1–0.2 dex than previous estimates from lower-resolution spectra. The C/O ratios obtained for the two planet-hosting stars are near-solar, with values of 0.55±0.10 for Kepler-138 and 0.52±0.12 for Kepler-186. Kepler-186 exhibits a marginally enhanced [Si/Fe] ratio.« less

Kepler, the Ultimate Aristotelian

NASA Astrophysics Data System (ADS)

Davis, A. E. L.

A comparison is made between Aristotelian and Newtonian versions of Laws of Motion. Kepler was successful in proving the 2 laws of motion of a single planet - to the extent that agreement with a framework of theory constitutes a proof. Of course he invented his framework of causes after the event, to fit the motions that had been already been quantified - but it may seem to you that Kepler's mainly mechanistic way explanation could have been considered by his contemporaries just as reasonable as Newton's action at a distance. It could be now apprecated that there was a window of less than 50 years before Newton's total synthesis. No-one previously had had the motivation to create a system of "celestial physics" based on a judicious use of Aristotelian principles. Yet this is what Kepler achieved.

Kepler Mission IYA Teacher Professional Development Workshops

NASA Astrophysics Data System (ADS)

Devore, E. K.; Harman, P.; Gould, A. D.; Koch, D.

2009-12-01

NASA's Kepler Mission conducted six teacher professional development workshops on the search for Earth-size in the habitable zone of Sun-like stars. The Kepler Mission launched in March, 2009. As a part of International Year of Astronomy 2009, this series of one-day workshops were designed and presented for middle and high school teachers, and science center and planetarium educators prior to and after the launch. The professional development workshops were designed using the best practices and principals from the National Science Education Standards and similar documents. Sharing the outcome of our plans, strategies and formative evaluation results can be of use to other Education and Public Outreach practitioners who plan similar trainings. Each event was supported by a Kepler team scientist, two Education & Public Outreach staff and local hosts. The workshops combined a science content lecture and discussion, making models, kinesthetic activities, and interpretation of transit data. The emphasis was on inquiry-based instruction and supported science education standards in grades 7-12. Participants’ kit included an orrery, optical sensor and software to demonstrate transit detection. The workshop plan, teaching strategies, and lessons learned from evaluation will be discussed. Future events are planned. Kepler's Education and Public Outreach program is jointly conducted by the SETI Institute and Lawrence Hall of Science at UC Berkeley in close coordination with the Kepler Mission at NASA Ames Research Center. The IYA Kepler Teacher Professional Development workshops were supported by NASA Grants to the E. DeVore, SETI Institute NAG2-6066 Kepler Education and Public Outreach and NNX08BA74G, IYA Kepler Mission Pre-launch Workshops. Teachers participate in human orrery.

The fidelity of Kepler eclipsing binary parameters inferred by the neural network

NASA Astrophysics Data System (ADS)

Holanda, N.; da Silva, J. R. P.

2018-04-01

This work aims to test the fidelity and efficiency of obtaining automatic orbital elements of eclipsing binary systems, from light curves using neural network models. We selected a random sample with 78 systems, from over 1400 eclipsing binary detached obtained from the Kepler Eclipsing Binaries Catalog, processed using the neural network approach. The orbital parameters of the sample systems were measured applying the traditional method of light curve adjustment with uncertainties calculated by the bootstrap method, employing the JKTEBOP code. These estimated parameters were compared with those obtained by the neural network approach for the same systems. The results reveal a good agreement between techniques for the sum of the fractional radii and moderate agreement for e cos ω and e sin ω, but orbital inclination is clearly underestimated in neural network tests.

The fidelity of Kepler eclipsing binary parameters inferred by the neural network

NASA Astrophysics Data System (ADS)

Holanda, N.; da Silva, J. R. P.

2018-07-01

This work aims to test the fidelity and efficiency of obtaining automatic orbital elements of eclipsing binary systems, from light curves using neural network models. We selected a random sample with 78 systems, from over 1400 detached eclipsing binaries obtained from the Kepler Eclipsing Binaries Catalog, processed using the neural network approach. The orbital parameters of the sample systems were measured applying the traditional method of light-curve adjustment with uncertainties calculated by the bootstrap method, employing the JKTEBOP code. These estimated parameters were compared with those obtained by the neural network approach for the same systems. The results reveal a good agreement between techniques for the sum of the fractional radii and moderate agreement for e cosω and e sinω, but orbital inclination is clearly underestimated in neural network tests.

Earth Resources Technology Satellite: US standard catalog No. U-12

NASA Technical Reports Server (NTRS)

1973-01-01

To provide dissemination of information regarding the availability of Earth Resources Technology Satellite (ERTS) imagery, a U.S. Standard Catalog is published on a monthly schedule. The catalogs identify imagery which has been processed and input to the data files during the preceding month. The U.S. Standard Catalog includes imagery covering the Continental United States, Alaska, and Hawaii. As a supplement to these catalogs, an inventory of ERTS imagery on 16 millimeter microfilm is available. The catalogs consist of four parts: (1) annotated maps which graphically depict the geographic areas covered by the imagery listed in the current catalog, (2) a computer-generated listing organized by observation identification number (D) with pertinent information on each image, (3) a computer listing of observations organized by longitude and latitude, and (4) observations which have had changes made in their catalog information since the original entry in the data base.

Kepler Data Release 3 Notes

NASA Technical Reports Server (NTRS)

Cleve, Jeffrey E.

2010-01-01

This describes the collection of data and the processing done on it so when researchers around the world get the Kepler data sets (which are a set of pixels from the telescope of a particular target (star, galaxy or whatever) over a 3 month period) they can adjust their algorithms fro things that were done (like subtracting all of one particular wavelength for example). This is used to calibrate their own algorithms so that they know what it is they are starting with. It is posted so that whoever is accessing the publicly available data (not all of it is made public) can understand it .. (most of the Kepler data is under restriction for 1 - 4 years and is not available, but the handbook is for everyone (public and restricted) The Data Analysis Working Group have released long and short cadence materials, including FFls and Dropped Targets for the Public. The Kepler Science Office considers Data Release 3 to provide "browse quality" data. These notes have been prepared to give Kepler users of the Multimission Archive at STScl (MAST) a summary of how the data were collected and prepared, and how well the data processing pipeline is functioning on flight data. They will be updated for each release of data to the public archive and placed on MAST along with other Kepler documentation, at http:// archive.stsci.edu/kepler/documents.html .Data release 3 is meant to give users the opportunity to examine the data for possibly interesting science and to involve the users in improving the pipeline for future data releases. To perform the latter service, users are encouraged to notice and document artifacts, either in the raw or processed data, and report them to the Science Office.

Homogeneous Photodynamical Analysis of Kepler's Multiply-Transiting Systems

NASA Astrophysics Data System (ADS)

Ragozzine, Darin

To search for planets more like our own, NASA s Kepler Space Telescope ( Kepler ) discovered thousands of exoplanet candidates that cross in front of ( transit ) their parent stars (e.g., Twicken et al. 2016). The Kepler exoplanet data represent an incredible observational leap forward as evidenced by hundreds of papers with thousands of citations. In particular, systems with multiple transiting planets combine the determination of physical properties of exoplanets (e.g., radii), the context provided by the system architecture, and insights from orbital dynamics. Such systems are the most information-rich exoplanetary systems (Ragozzine & Holman 2010). Thanks to Kepler s revolutionary dataset, understanding these Multi-Transiting Systems (MTSs) enables a wide variety of major science questions. In conclusion, existing analyses of MTSs are incomplete and suboptimal and our efficient and timely proposal will provide significant scientific gains ( 100 new mass measurements and 100 updated mass measurements). Furthermore, our homogeneous analysis enables future statistical analyses, including those necessary to characterize the small planet mass-radius relation with implications for understanding the formation, evolution, and habitability of planets. The overarching goal of this proposal is a complete homogeneous investigation of Kepler MTSs to provide detailed measurements (or constraints) on exoplanetary physical and orbital properties. Current investigations do not exploit the full power of the Kepler data; here we propose to use better data (Short Cadence observations), better methods (photodynamical modeling), and a better statistical method (Bayesian Differential Evolution Markov Chain Monte Carlo) in a homogenous analysis of all 700 Kepler MTSs. These techniques are particularly valuable for understanding small terrestrial planets. We propose to extract the near-maximum amount of information from these systems through a series of three research objectives

Kepler Mission to Detect Earth-like Planets

NASA Technical Reports Server (NTRS)

Kondo, Yoji

2003-01-01

Kepler Mission to detect Earth-like planets in our Milky Way galaxy was approved by NASA in December 2001 for a 4-5 year mission. The launch is planned in about 5 years. The Kepler observatory will be placed in an Earth-trailing orbit. The unique feature of the Kepler Mission is its ability to detect Earth-like planets orbiting around solar-type stars at a distance similar to that of Earth (from our Sun); such an orbit could provide an environment suitable for supporting life as we know it. The Kepler observatory accomplishes this feat by looking for the transits of planetary object in front of their suns; Kepler has a photometric precision of 10E-5 (0.00001) to achieve such detections. Other ongoing planetary detection programs (based mostly on a technique that looks for the shifting of spectral lines of the primary star due to its planetary companions' motions around it) have detected massive planets (with masses in the range of Jupiter); such massive planets are not considered suitable for supporting life. If our current theories for the formation of planetary systems are valid, we expect to detect about 50 Earth-like planets during Kepler's 4-year mission (assuming a random distribution of the planetary orbital inclinations with respect to the line of sight from Kepler). The number of detection will increase about 640 planets if the planets to be detected are Jupiter-sized.

Kepler Mission to Detect Earth-like Planets

NASA Technical Reports Server (NTRS)

Kondo, Yoji

2002-01-01

Kepler Mission to detect Earth-like planets in our Milky Way galaxy was approved by NASA in December 2001 for a 4-5 year mission. The launch is planned in about 5 years. The Kepler observatory will be placed in an Earth-trailing orbit. The unique feature of the Kepler Mission is its ability to detect Earth-like planets orbiting around solar-type stars at a distance similar to that of Earth (from our Sun); such an orbit could provide an environment suitable for supporting life as we know it. The Kepler observatory accomplishes this feat by looking for the transits of planetary object in front of their suns; Kepler has a photometric precision of 10E-5 (0.00001) to achieve such detections. Other ongoing planetary detection programs (based mostly on a technique that looks for the shifting of spectral lines of the primary star due to its planetary companions' motions around it) have detected massive planets (with masses in the range of Jupiter); such massive planets are not considered suitable for supporting life. If our current theories for the formation of planetary systems are valid, we expect to detect about 50 Earth-like planets during Kepler's 4-year mission (assuming a random distribution of the planetary orbital inclinations with respect to the line of sight from Kepler). The number of detection will increase about 640 planets if the planets to be detected are Jupiter-sized.

WCSTools 3.0: More Tools for Image Astrometry and Catalog Searching

NASA Astrophysics Data System (ADS)

Mink, Douglas J.

For five years, WCSTools has provided image astrometry for astronomers who need accurate positions for objects they wish to observe. Other functions have been added and improved since the package was first released. Support has been added for new catalogs, such as the GSC-ACT, 2MASS Point Source Catalog, and GSC II, as they have been published. A simple command line interface can search any supported catalog, returning information in several standard formats, whether the catalog is on a local disk or searchable over the World Wide Web. The catalog searching routine can be located on either end (or both ends!) of such a web connection, and the output from one catalog search can be used as the input to another search.

Kepler AutoRegressive Planet Search

NASA Astrophysics Data System (ADS)

Caceres, Gabriel Antonio; Feigelson, Eric

2016-01-01

The Kepler AutoRegressive Planet Search (KARPS) project uses statistical methodology associated with autoregressive (AR) processes to model Kepler lightcurves in order to improve exoplanet transit detection in systems with high stellar variability. We also introduce a planet-search algorithm to detect transits in time-series residuals after application of the AR models. One of the main obstacles in detecting faint planetary transits is the intrinsic stellar variability of the host star. The variability displayed by many stars may have autoregressive properties, wherein later flux values are correlated with previous ones in some manner. Our analysis procedure consisting of three steps: pre-processing of the data to remove discontinuities, gaps and outliers; AR-type model selection and fitting; and transit signal search of the residuals using a new Transit Comb Filter (TCF) that replaces traditional box-finding algorithms. The analysis procedures of the project are applied to a portion of the publicly available Kepler light curve data for the full 4-year mission duration. Tests of the methods have been made on a subset of Kepler Objects of Interest (KOI) systems, classified both as planetary `candidates' and `false positives' by the Kepler Team, as well as a random sample of unclassified systems. We find that the ARMA-type modeling successfully reduces the stellar variability, by a factor of 10 or more in active stars and by smaller factors in more quiescent stars. A typical quiescent Kepler star has an interquartile range (IQR) of ~10 e-/sec, which may improve slightly after modeling, while those with IQR ranging from 20 to 50 e-/sec, have improvements from 20% up to 70%. High activity stars (IQR exceeding 100) markedly improve. A periodogram based on the TCF is constructed to concentrate the signal of these periodic spikes. When a periodic transit is found, the model is displayed on a standard period-folded averaged light curve. Our findings to date on real

Photometer Performance Assessment in Kepler Science Data Processing

NASA Technical Reports Server (NTRS)

Li, Jie; Allen, Christopher; Bryson, Stephen T.; Caldwell, Douglas A.; Chandrasekaran, Hema; Clarke, Bruce D.; Gunter, Jay P.; Jenkins, Jon M.; Klaus, Todd C.; Quintana, Elisa V.;

Kepler's Cosmos And The Lathe Of Heaven

NASA Astrophysics Data System (ADS)

Brecher, Kenneth

2011-01-01

Johannes Kepler's Mysterium Cosmographicum, published in 1596, presented his vision of the geometrical structure of the solar system. Kepler sought to account for the number of planets, thought to be six, as well as their orbital radii. He assigned orbits to the planets in three-dimensional space. Kepler proposed that the planets move on six spheres inscribed within and circumscribed around the five platonic solids. How did he arrive at his model? By his own account reported in the book, the central idea occurred to him while giving a lecture about planetary conjunctions. But was this revelation the origin of the model? In this presentation, we discuss the artistic, scientific and mathematical environment in which Kepler was immersed in late 16th century Europe. Examples will be shown of some of the readily available inscribed polyhedra that he may have seen - printed in widely circulated books, included in well-known paintings and engravings, and displayed as three dimensional ornamentally turned sculptures. It is highly likely that he saw such physical models five years later while in the employ of Rudolf II who was an avid ornamental turner. Layered polyhedral ivory turnings were made by the nobility with what were then fairly common lathes. Kepler himself wanted to have his own celestial model made into a punch bowl! Therefore, it seems plausible that Kepler had seen models of inscribed platonic solids well before 1596. Later in life Kepler reprinted the Mysterium Cosmographicum with very little fundamental change in its outlook, even after having found what we now call Kepler's three laws of planetary motion. His interest in nested polyhedra may well have preceded any astronomical evidence or geometrical reasoning, arising from artistic and aesthetic encounters that occurred early in his life. Project LITE is supported by the NSF through DUE Grant # 0715975.

Some Problems Involved in the Shared Cataloging Subsystem of the Ohio College Library Center.

ERIC Educational Resources Information Center

Sacco, Margaret T.

This report outlines the development of the Ohio College Library Center (OCLC) and considers some basic problems in OCLC shared cataloging--e.g., the uneven quality of input cataloging and increasing number of duplicate records. Summaries of findings from an OCLC evaluative study and two surveys of shared cataloging are presented. The report…

Book Catalogs versus Card Catalogs *

PubMed Central

Pizer, Irwin H.

1965-01-01

The development of the library catalog in book form and its abandonment in favor of the card catalog are briefly traced. The advantages and disadvantages of both types of catalogs are enumerated, and several solutions which tried to combine the best features of both are discussed. The present trend back to the book catalog, made possible by recent advances in computer technology, is analyzed, advantages and disadvantages are compared, current examples are illustrated, and finally the computerized catalog is weighed against both the book and card catalog as to main features and practicality. PMID:14271116

WIFIRE Data Model and Catalog for Wildfire Data and Tools

NASA Astrophysics Data System (ADS)

Altintas, I.; Crawl, D.; Cowart, C.; Gupta, A.; Block, J.; de Callafon, R.

2014-12-01

The WIFIRE project (wifire.ucsd.edu) is building an end-to-end cyberinfrastructure for real-time and data-driven simulation, prediction and visualization of wildfire behavior. WIFIRE may be used by wildfire management authorities in the future to predict wildfire rate of spread and direction, and assess the effectiveness of high-density sensor networks in improving fire and weather predictions. WIFIRE has created a data model for wildfire resources including sensed and archived data, sensors, satellites, cameras, modeling tools, workflows and social information including Twitter feeds. This data model and associated wildfire resource catalog includes a detailed description of the HPWREN sensor network, SDG&E's Mesonet, and NASA MODIS. In addition, the WIFIRE data-model describes how to integrate the data from multiple heterogeneous sources to provide detailed fire-related information. The data catalog describes 'Observables' captured by each instrument using multiple ontologies including OGC SensorML and NASA SWEET. Observables include measurements such as wind speed, air temperature, and relative humidity, as well as their accuracy and resolution. We have implemented a REST service for publishing to and querying from the catalog using Web Application Description Language (WADL). We are creating web-based user interfaces and mobile device Apps that use the REST interface for dissemination to wildfire modeling community and project partners covering academic, private, and government laboratories while generating value to emergency officials and the general public. Additionally, the Kepler scientific workflow system is instrumented to interact with this data catalog to access real-time streaming and archived wildfire data and stream it into dynamic data-driven wildfire models at scale.

Orbital and Systemic Parameters for Algol Binaries in the Field-of-View of the Kepler Spacecraft

NASA Astrophysics Data System (ADS)

Peters, Geraldine J.; Vaccaro, Todd R.; Wilson, Robert E.

2013-02-01

We propose observations of seven Algol-type binaries with the 4m Echelle spectrograph necessary for the interpretation of ongoing photometry from the it Kepler spacecraft and archival it Kepler data being analyzed for an approved NASA/ADAP project. These Algols are direct-impact systems (periods range from 1.3-4.5^d) in which the gas stream strikes the photosphere of the gainer, producing a shock. The it Kepler light curves reveal striking long and short-term variability never before seen in ground-based observations. Especially interesting is a long-term oscillation in the relative brightness of the quadrature light that we call L/T variability, which appears to be caused from a migrating variable hot spot. The it Kepler photometry is being interpreted with an updated version of the Wilson & Devinney (WD) program. The KPNO spectra will supply it critical input parameters (e.g. temperatures) and yield radial velocity curves from which we will determine the masses of the stars and absolute dimensions of the systems. Currently there are it no published spectra of most of the program binaries, including WX Dra, the prototype L/T variable and our primary target. We request 4 nights of observing time to cover one orbital cycle in the binaries with the longest periods. This project will yield information on the detailed physics of mass transfer, especially the roles of accretion hot spots and magnetic fields, and also test the new WD program for future applications by others working with the it Kepler database.

VizieR Online Data Catalog: Transit times for Kepler-79's known planets (Jontof-Hutter+, 2014)

NASA Astrophysics Data System (ADS)

Jontof-Hutter, D.; Lissauer, J. J.; Rowe, J. F.; Fabrycky, D. C.

2017-06-01

Variations in the brightness of Kepler-79 were monitored with an effective duty cycle exceeding 90% starting at barycentric Julian date (BJD) 2454964.512, with all data returned to Earth at a cadence of 29.426 minutes (long cadence, LC); data were also returned at a cadence of 58.85 s (short cadence, SC) beginning from BJD 2455093.216. Here and throughout we base our timeline for transit data from T=JD-2454900. Our analysis uses SC data where available, augmented by the LC data set primarily during the epoch prior to T<193 days, for which no SC data were returned to Earth. (1 data file).

Kepler Discovers First Confirmed Planet in the Habitable Zone (Kepler-22); Celebrates 1000 Days

NASA Image and Video Library

2011-12-07

At a press conference held at NASA Ames Research Center,the Kepler team announced the discovery of its first confirmed planet in the 'habitable zone' or the region around a star where liquid water could exist on a planet's surface. Named Kepler-22b, the planet is about 2.4 times the radius of the Earth and orbits a sun-like star about 600 light years away between the constellations of Cygnus and Lyra.

Radius Determination of Solar-type Stars Using Asteroseismology: What to Expect from the Kepler Mission

NASA Astrophysics Data System (ADS)

Stello, Dennis; Chaplin, William J.; Bruntt, Hans; Creevey, Orlagh L.; García-Hernández, Antonio; Monteiro, Mario J. P. F. G.; Moya, Andrés; Quirion, Pierre-Olivier; Sousa, Sergio G.; Suárez, Juan-Carlos; Appourchaux, Thierry; Arentoft, Torben; Ballot, Jerome; Bedding, Timothy R.; Christensen-Dalsgaard, Jørgen; Elsworth, Yvonne; Fletcher, Stephen T.; García, Rafael A.; Houdek, Günter; Jiménez-Reyes, Sebastian J.; Kjeldsen, Hans; New, Roger; Régulo, Clara; Salabert, David; Toutain, Thierry

2009-08-01

For distant stars, as observed by the NASA Kepler satellite, parallax information is currently of fairly low quality and is not complete. This limits the precision with which the absolute sizes of the stars and their potential transiting planets can be determined by traditional methods. Asteroseismology will be used to aid the radius determination of stars observed during NASA's Kepler mission. We report on the recent asteroFLAG hare-and-hounds Exercise#2, where a group of "hares" simulated data of F-K main-sequence stars that a group of "hounds" sought to analyze, aimed at determining the stellar radii. We investigated stars in the range 9 < V < 15, both with and without parallaxes. We further test different uncertainties in T eff, and compare results with and without using asteroseismic constraints. Based on the asteroseismic large frequency spacing, obtained from simulations of 4 yr time series data from the Kepler mission, we demonstrate that the stellar radii can be correctly and precisely determined, when combined with traditional stellar parameters from the Kepler Input Catalogue. The radii found by the various methods used by each independent hound generally agree with the true values of the artificial stars to within 3%, when the large frequency spacing is used. This is 5-10 times better than the results where seismology is not applied. These results give strong confidence that radius estimation can be performed to better than 3% for solar-like stars using automatic pipeline reduction. Even when the stellar distance and luminosity are unknown we can obtain the same level of agreement. Given the uncertainties used for this exercise we find that the input log g and parallax do not help to constrain the radius, and that T eff and metallicity are the only parameters we need in addition to the large frequency spacing. It is the uncertainty in the metallicity that dominates the uncertainty in the radius.

Demystifying Kepler Data: A Primer for Systematic Artifact Mitigation

NASA Technical Reports Server (NTRS)

Kinemuchi, K.; Barclay, T.; Fanelli, M.; Pepper, J.; Still, M.; Howell, B.

2012-01-01

The Kepler spacecraft has collected data of high photometric precision and cadence almost continuously since operations began on 2009 May 2. Primarily designed to detect planetary transits and asteroseismological signals from solar-like stars, Kepler has provided high quality data for many areas of investigation. Unconditioned simple aperture time-series photometry are however affected by systematic structure. Examples of these systematics are differential velocity aberration, thermal gradients across the spacecraft, and pointing variations. While exhibiting some impact on Kepler's primary science, these systematics can critically handicap potentially ground-breaking scientific gains in other astrophysical areas, especially over long timescales greater than 10 days. As the data archive grows to provide light curves for 10(exp 5) stars of many years in length, Kepler will only fulfill its broad potential for stellar astrophysics if these systematics are understood and mitigated. Post-launch developments in the Kepler archive, data reduction pipeline and open source data analysis software have occurred to remove or reduce systematic artifacts. This paper provides a conceptual primer for users of the Kepler data archive to understand and recognize systematic artifacts within light curves and some methods for their removal. Specific examples of artifact mitigation are provided using data available within the archive. Through the methods defined here, the Kepler community will find a road map to maximizing the quality and employment of the Kepler legacy archive.

Discourse following award of Kepler Gold Medal. [Kepler Laws, planetary astronomy and physics, and Jupiter studies

NASA Technical Reports Server (NTRS)

Kuiper, G. P.

1973-01-01

Kuiper briefly reviews Kepler's contributions to the field of planetary astronomy and physics, along with references to his own background in the study of stars, planets, and the solar system. He mentions his participation in NASA programs related to planetary astronomy. He concludes his remarks with thanks for being honored by the award of the Kepler Gold Medal.

Kepler planet-detection mission: introduction and first results.

PubMed

Borucki, William J; Koch, David; Basri, Gibor; Batalha, Natalie; Brown, Timothy; Caldwell, Douglas; Caldwell, John; Christensen-Dalsgaard, Jørgen; Cochran, William D; DeVore, Edna; Dunham, Edward W; Dupree, Andrea K; Gautier, Thomas N; Geary, John C; Gilliland, Ronald; Gould, Alan; Howell, Steve B; Jenkins, Jon M; Kondo, Yoji; Latham, David W; Marcy, Geoffrey W; Meibom, Søren; Kjeldsen, Hans; Lissauer, Jack J; Monet, David G; Morrison, David; Sasselov, Dimitar; Tarter, Jill; Boss, Alan; Brownlee, Don; Owen, Toby; Buzasi, Derek; Charbonneau, David; Doyle, Laurance; Fortney, Jonathan; Ford, Eric B; Holman, Matthew J; Seager, Sara; Steffen, Jason H; Welsh, William F; Rowe, Jason; Anderson, Howard; Buchhave, Lars; Ciardi, David; Walkowicz, Lucianne; Sherry, William; Horch, Elliott; Isaacson, Howard; Everett, Mark E; Fischer, Debra; Torres, Guillermo; Johnson, John Asher; Endl, Michael; MacQueen, Phillip; Bryson, Stephen T; Dotson, Jessie; Haas, Michael; Kolodziejczak, Jeffrey; Van Cleve, Jeffrey; Chandrasekaran, Hema; Twicken, Joseph D; Quintana, Elisa V; Clarke, Bruce D; Allen, Christopher; Li, Jie; Wu, Haley; Tenenbaum, Peter; Verner, Ekaterina; Bruhweiler, Frederick; Barnes, Jason; Prsa, Andrej

2010-02-19

The Kepler mission was designed to determine the frequency of Earth-sized planets in and near the habitable zone of Sun-like stars. The habitable zone is the region where planetary temperatures are suitable for water to exist on a planet's surface. During the first 6 weeks of observations, Kepler monitored 156,000 stars, and five new exoplanets with sizes between 0.37 and 1.6 Jupiter radii and orbital periods from 3.2 to 4.9 days were discovered. The density of the Neptune-sized Kepler-4b is similar to that of Neptune and GJ 436b, even though the irradiation level is 800,000 times higher. Kepler-7b is one of the lowest-density planets (approximately 0.17 gram per cubic centimeter) yet detected. Kepler-5b, -6b, and -8b confirm the existence of planets with densities lower than those predicted for gas giant planets.

Robo-AO Kepler Planetary Candidate Survey. III. Adaptive Optics Imaging of 1629 Kepler Exoplanet Candidate Host Stars

NASA Astrophysics Data System (ADS)

Ziegler, Carl; Law, Nicholas M.; Morton, Tim; Baranec, Christoph; Riddle, Reed; Atkinson, Dani; Baker, Anna; Roberts, Sarah; Ciardi, David R.

2017-02-01

The Robo-AO Kepler Planetary Candidate Survey is observing every Kepler planet candidate host star with laser adaptive optics imaging to search for blended nearby stars, which may be physically associated companions and/or responsible for transit false positives. In this paper, we present the results of our search for stars nearby 1629 Kepler planet candidate hosts. With survey sensitivity to objects as close as ˜0.″15, and magnitude differences Δm ≤slant 6, we find 223 stars in the vicinity of 206 target KOIs; 209 of these nearby stars have not been previously imaged in high resolution. We measure an overall nearby-star probability for Kepler planet candidates of 12.6 % +/- 0.9 % at separations between 0.″15 and 4.″0. Particularly interesting KOI systems are discussed, including 26 stars with detected companions that host rocky, habitable zone candidates and five new candidate planet-hosting quadruple star systems. We explore the broad correlations between planetary systems and stellar binarity, using the combined data set of Baranec et al. and this paper. Our previous 2σ result of a low detected nearby star fraction of KOIs hosting close-in giant planets is less apparent in this larger data set. We also find a significant correlation between detected nearby star fraction and KOI number, suggesting possible variation between early and late Kepler data releases.

Johannes Kepler and the Supernova of 1604

NASA Astrophysics Data System (ADS)

Boner, P. J.

2006-08-01

The brilliant luminary that first appeared in October 1604 was considered by many contemporaries to be a new star of unrivalled magnitude. Shining forth near the historic conjunction of Mars, Jupiter and Saturn, the new star held important implications for several areas of interest, notably astrology, astronomy, chronology and theology. Addressing all of these areas in his comprehensive book, De stella nova (1606), Johannes Kepler (1571-1630) studied the new star extensively under the aegis of Holy Roman Emperor Rudolf II (1552-1612) in Prague. The focus of the following presentation is Kepler's theory of the new star's origins in the celestial ether. Describing the heavens poetically as a fertile expanse of "liquid fields", Kepler suggested that the new star sprung from the celestial ether much like the numerous living beings in the sublunary realm which were spontaneously generated from the Earth. As evidence for his claim, Kepler pointed to the conspicuous mathematical patterns similarly observed in earthly and celestial entities. Kepler's efficient cause for this explanation, known as the animate faculty, accounted for both the generation and form of new phenomena in the celestial and terrestrial realms. The new star of 1604 proved to be no exception.

The architecture and formation of the Kepler-30 planetary system

NASA Astrophysics Data System (ADS)

Panichi, F.; Goździewski, K.; Migaszewski, C.; Szuszkiewicz, E.

2018-04-01

We study the orbital architecture, physical characteristics of planets, formation and long-term evolution of the Kepler-30 planetary system, detected and announced in 2012 by the KEPLER team. We show that the Kepler-30 system belongs to a particular class of very compact and quasi-resonant, yet long-term stable planetary systems. We re-analyse the light curves of the host star spanning Q1-Q17 quarters of the KEPLER mission. A huge variability of the Transit Timing Variations (TTV) exceeding 2 days is induced by a massive Jovian planet located between two Neptune-like companions. The innermost pair is near to the 2:1 mean motion resonance (MMR), and the outermost pair is close to higher order MMRs, such as 17:7 and 7:3. Our re-analysis of photometric data allows us to constrain, better than before, the orbital elements, planets' radii and masses, which are 9.2 ± 0.1, 536 ± 5, and 23.7 ± 1.3 Earth masses for Kepler-30b, Kepler-30c and Kepler-30d, respectively. The masses of the inner planets are determined within ˜1% uncertainty. We infer the internal structures of the Kepler-30 planets and their bulk densities in a wide range from (0.19 ± 0.01) g.cm-3 for Kepler-30d, (0.96 ± 0.15) g.cm-3 for Kepler-30b, to (1.71 ± 0.13) g.cm-3 for the Jovian planet Kepler-30c. We attempt to explain the origin of this unique planetary system and a deviation of the orbits from exact MMRs through the planetary migration scenario. We anticipate that the Jupiter-like planet plays an important role in determining the present dynamical state of this system.

Revised Masses and Densities of the Planets around Kepler-10

NASA Astrophysics Data System (ADS)

Weiss, Lauren M.; Rogers, Leslie A.; Isaacson, Howard T.; Agol, Eric; Marcy, Geoffrey W.; Rowe, Jason F.; Kipping, David; Fulton, Benjamin; Lissauer, Jack; Howard, Andrew; Clark Fabrycky, Daniel

2015-12-01

Determining which small exoplanets have stony-iron compositions is necessary for quantifying the occurrence of such planets and for understanding the physics of planet formation. Kepler-10 hosts the stony-iron world Kepler-10b, and also contains what has been reported to be the largest solid silicate-ice planet, Kepler-10c. Using 220 radial velocities (RVs), including 72 new precise RVs from Keck-HIRES, and 17 quarters of Kepler photometry, we obtain the most complete picture of the Kepler-10 system to date. We find that Kepler-10b (Rp = 1.47 R⊕) has mass 3.70 ± 0.43 M⊕ and density 6.44 ± 0.73 g cm-3. Modeling the interior of Kepler-10b as an iron core overlaid with a silicate mantle, we find that the core constitutes 0.17 ± 0.11 of the planet mass. For Kepler-10c (Rp = 2.35 R⊕) we measure mass 13.32 ± 1.65 M⊕and density 5.67 ± 0.70 g cm-3, significantly lower than the mass in Dumusque et al. (2014, 17.2±1.9 M⊕). Kepler-10c is not sufficiently dense to have a pure stony-iron composition. Internal compositional modeling reveals that at least 10% of the radius of Kepler-10c is a volatile envelope composed of either hydrogen-helium (0.0027 ± 0.0015 of the mass, 0.172±0.037 of the radius) or super-ionic water (0.309±0.11 of the mass, 0.305±0.075 of the radius). Transit timing variations (TTVs) of Kepler-10c indicate the likely presence of a third planet in the system, KOI-72.X. The TTVs and RVs are consistent with KOI-72.X having an orbital period of 24, 71, 82, or 101 days, and a mass from 1-7 M⊕.

Kepler False Positive Rate & Occurrence of Earth-size and Larger Planets

NASA Astrophysics Data System (ADS)

Fressin, Francois; Torres, G.; Charbonneau, D.; Kepler Team

2013-01-01

We model the Kepler exoplanet survey targets and their background stars to estimate the occurrence of astrophysical configurations which could mimic an exoplanetary transit. Using real noise level estimates, we compute the number and the characteristics of detectable eclipsing pairs involving stars or planets. We select the fraction of those that would pass the Kepler candidate vetting procedure, including the modeling of the centroid shift of their position on the Kepler camera. By comparing their distribution with that of the Kepler Object Interests from the first 6 quarters of Kepler data, we quantify the false positive rate of Kepler, as a function of candidate planet size and period. Most importantly, this approach allows quantifying and characterizing the distribution of planets, with no assumption of any prior, as the remaining population of the Kepler candidate list minus the simulated population of alternate astrophysical causes. We study the actual detection recovery rate for Kepler that allows reproducing both the KOI size and period distribution as well as their SNR distribution. We estimate the occurrence of planets down to Earth-size, and study if their frequency is correlated with their host star spectral type. This work is supported by the Spitzer General Observer Proposal #80117 - Validating the First Habitable-Zone Planet Candidates Identified by the NASA Kepler Mission, and by the Kepler Participating Scientist Contract led by David Charbonneau, to confirm the planetary nature of candidates identified by the Kepler mission

Earth Resources Technology Satellite: Non-US standard catalog No. N-13

NASA Technical Reports Server (NTRS)

1973-01-01

To provide dissemination of information regarding the availability of Earth Resources Technology Satellite (ERTS) imagery, a Non-U.S. Standard Catalog is published on a monthly schedule. The catalogs identify imagery which has been processed and input to the data files during the preceding month. The Non-U.S. Standard Catalog includes imagery covering all areas except that of the United States, Hawaii, and Alaska. Imagery adjacent to the Continental U.S. and Alaska borders will normally appear in the U.S. Standard Catalog. As a supplement to these catalogs, an inventory of ERTS imagery on 16 millimeter microfilm is available. The catalogs consist of four parts: (1) annotated maps which graphically depict the geographic areas covered by the imagery listed in the current catalog, (2) a computer-generated listing organized by observation identification number (ID) with pertinent information for each image, (3) a computer listing of observations organized by longitude and latitude, and (4) observations which have had changes made in their catalog information since the original entry in the data base.

Planet Detection: The Kepler Mission

NASA Astrophysics Data System (ADS)

Jenkins, Jon M.; Smith, Jeffrey C.; Tenenbaum, Peter; Twicken, Joseph D.; Van Cleve, Jeffrey

2012-03-01

and another 1100 pixels containing virtual smear measurements used to remove artifacts caused by the lack of a shutter and a finite 0.51-s readout time; and 1070 trailing black measurements that monitor the bias voltage presented at the input of the analog-to-digital converter so that the zero point can be restored to the digitized data during processing [24]. There are a total of up to 6,092,680 pixels containing the stellar and collateral data collected for each LC, with 48 LCs/day. While only 512 SC targets are defined at any given time, there are 30 SC intervals for each LC interval, and an average of 85 pixels are allocated for each SC target star. Smear and black-level measurements are collected for each SC target, but only for the rows and columns occupied by SC stellar target pixels. Approximately 21% of the pixel data returned by Kepler are SC data. The total data rate for both LC and SC data is 1.3 GB/day when the data are expanded to 4 bytes/pixel from the compressed bit stream. Raw pixel data are downlinked at monthly intervals through National Aeronautics and Space Administration's (NASA's) Deep Space Network (DSN) and routed through the ground system to the Kepler Science Operations Center (SOC) at NASA Ames Research Center. The SOC performs a number of critical functions for the mission, including management of the target definitions which specify the pixels needed for each stellar target and the compression tables that allow a ˜5:1 compression of the science data onboard the SSR (from 23 bits/pixel to 4.6 bits/pixel), but its two major tasks are to: 1. Process raw pixel data to produce archival science data products, including calibrated pixels, measurements of the location or centroid of each star in each frame, flux time series representing the brightness of each star in each data frame, and systematic error-corrected flux time series that have instrumental artifacts removed. 2. Search each target-star light curve to identify transit-like features

A Bewildering and Dynamic Picture of Exoplanetary Systems Identified by the Kepler Mission (Invited)

NASA Astrophysics Data System (ADS)

Jenkins, J. M.

2013-12-01

Kepler vaulted into the heavens on March 7, 2009, initiating NASA's search for Earth-size planets orbiting Sun-like stars in the habitable zone, where liquid water could exist on a rocky planetary surface. In the 4 years since, a flood of photometric data of unprecedented precision and continuity on more than 190,000 stars has provoked a watershed of 134+ confirmed or validated planets, 3200+ planetary candidates (most sub-Neptune in size and many comparable to or smaller than Earth), and a revolution in asteroseismology and astrophysics. Recent discoveries include Kepler-62 with 5 planets total, of which 2 are in the habitable zone with radii of 1.4 and 1.7 Re. Approximately 500 of the stars in the Kepler survey with planets host multiple transiting planets: 43% of planet candidates have transiting siblings. Many of these multiple transiting planet systems are dynamically packed and are unlikely, therefore, to have formed in situ. These systems experienced strong migration and evolution to arrive at the configurations we observe today, with important implications for the time-variable habitability of these planets over their histories. The half dozen circumbinary transiting planet systems discovered by Kepler to date highlight the dynamic nature of the habitable zone in systems with multiple host stars where the habitable zone may change significantly on timescales commensurate with the orbital period of the binary. While the catalog of circumbinary planets is small at this point, it already possesses at least one example of an exoplanet in the habitable zone. This implies that the majority of habitable zone planets may be circumbinary planets given the high frequency of multiple star systems and the early detection of Kepler-47b. KIC-12557548 is most likely a disintegrating sub-Mercury-sized planet. While it was probably never habitable, it represents a unique example of the dynamic nature of planetary systems. These amazing discoveries challenge our conventional

LANDSAT non-US standard catalog, 1 May 1977 - 31 May 1977

NASA Technical Reports Server (NTRS)

1977-01-01

Information regarding the availability of LANDSAT imagery processed and input to the data files by the NASA Data Processing Facility is published on a monthly basis. The U.S. Standard Catalog includes imagery covering the continental United States, Alaska and Hawaii. the Non-U.S. Standard Catalog identifies all the remaining coverage. Sections 1 and 2 describe the contents and format for the catalogs and associated microfilm. Section 3 provides a cross-reference defining the beginning and ending dates for LANDSAT cycles. Sections 4 and 5 cover LANDSAT-1 and LANDSAT-2 coverage, respectively.

Limits On Undetected Planets in the Six Transiting Planets Kepler-11 System

NASA Technical Reports Server (NTRS)

Lissauer, Jack

2017-01-01

The Kepler-11 has five inner planets ranging from approx. 2 - 1 times as massive Earth in a tightly-packed configuration, with orbital periods between 10 and 47 days. A sixth planet, Kepler-11 g, with a period of118 days, is also observed. The spacing between planets Kepler-11 f and Kepler-11 g is wide enough to allow room for a planet to orbit stably between them. We compare six and seven planet fits to measured transit timing variations (TTVs) of the six known planets. We find that in most cases an additional planet between Kepler-11 f and Kepler-11 g degrades rather than enhances the fit to the TTV data, and where the fit is improved, the improvement provides no significant evidence of a planet between Kepler-11 f and Kepler-11 g. This implies that any planet in this region must be low in mass. We also provide constraints on undiscovered planets orbiting exterior to Kepler-11 g. representations will be described.

The first comprehensive catalog of γ Dor pulsators and their characteristics

NASA Astrophysics Data System (ADS)

Ibanoglu, C.; Çakırlı, Ö.; Sipahi, E.

2018-07-01

We present the first comprehensive catalog of the γ Doradus type pulsating stars. This catalog covers observational properties of all γ Dor variables obtained until January 2017. The photometric and physical properties of 109 well - known γ Dor pulsators, 18 hybrid stars, 13 anomalous γ Dor stars, and 22 γ Dor stars in eclipsing plus 1 non-eclipsing SB2 binary systems are presented as separate tables. In addition, 291 candidate γ Dor variables discovered by CoRot, 307 candidate γ Dor, 205 hybrid and 11 candidate γ Dor in binaries discovered by Kepler were also presented. Distribution of the genuine single γ Dor pulsators in the Ppuls-Teff, Amplitude-Teff, Amplitude-Ppuls and L-Teff diagrams are presented and discussed. We find following correlations for the γ Dor pulsators in the eclipsing binaries: Ppuls ∝ Porb0.27, Ppuls ∝ Q0.45, and Ppuls ∝ r-0.44, where (Q) is the pulsation constant and r is the fractional radius of the pulsating component in the binary system. The correlation coefficients are not high enough due to limited sample and scattering in the data.

Landsat non-US standard catalog

NASA Technical Reports Server (NTRS)

1975-01-01

The Non-U.S. Standard Catalog lists Non-U.S. imagery acquired by Landsat 1 and 2 which was processed and input to the data files during the referenced month. Data, such as date acquired, cloud cover and image quality are given for each scene. The microfilm roll and frame on which the scene may be found are also given.

The Kepler Science Data Processing Pipeline Source Code Road Map

NASA Technical Reports Server (NTRS)

Wohler, Bill; Jenkins, Jon M.; Twicken, Joseph D.; Bryson, Stephen T.; Clarke, Bruce Donald; Middour, Christopher K.; Quintana, Elisa Victoria; Sanderfer, Jesse Thomas; Uddin, Akm Kamal; Sabale, Anima;

Demystifying Kepler Data: A Primer for Systematic Artifact Mitigation

NASA Astrophysics Data System (ADS)

Kinemuchi, K.; Barclay, T.; Fanelli, M.; Pepper, J.; Still, M.; Howell, Steve B.

2012-09-01

The Kepler spacecraft has collected data of high photometric precision and cadence almost continuously since operations began on 2009 May 2. Primarily designed to detect planetary transits and asteroseismological signals from solar-like stars, Kepler has provided high-quality data for many areas of investigation. Unconditioned simple aperture time-series photometry is, however, affected by systematic structure. Examples of these systematics include differential velocity aberration, thermal gradients across the spacecraft, and pointing variations. While exhibiting some impact on Kepler’s primary science, these systematics can critically handicap potentially ground-breaking scientific gains in other astrophysical areas, especially over long timescales greater than 10 days. As the data archive grows to provide light curves for 105 stars of many years in length, Kepler will only fulfill its broad potential for stellar astrophysics if these systematics are understood and mitigated. Post-launch developments in the Kepler archive, data reduction pipeline and open source data analysis software have helped to remove or reduce systematic artifacts. This paper provides a conceptual primer to help users of the Kepler data archive understand and recognize systematic artifacts within light curves and some methods for their removal. Specific examples of artifact mitigation are provided using data available within the archive. Through the methods defined here, the Kepler community will find a road map to maximizing the quality and employment of the Kepler legacy archive.

Spectroscopy of Kepler Exo-planet Transit Candidate Stars

NASA Astrophysics Data System (ADS)

Howell, Steve B.; Everett, Mark; Silva, David; Rowe, Jason; Szkody, Paula; Mighell, Ken; Ciardi, David

2012-02-01

We propose a long term spectroscopic follow-up program in support of the NASA Kepler exo-planet mission. The Kepler project is now focusing on exo-planet candidates which are smaller in radius (down to Earth- size), have longer period orbits and many of which orbit fainter stars. Our program will spend 85% of the time on our primary goal, spectroscopy of the host stars of exoplanet candidates, and 15% of the time on investigation of other astrophysically interesting stars discovered by Kepler. Our prime goal is to obtain reconnaissance spectra of newly discovered exo-planet stars yielding model fits to T_eff and log g. Secondary goals are to obtain velocity information on EBs with a third component aimed toward discovery of circumbinary planets (such as Kepler 16b) and identification spectra of U-band selected targets in order to find more white dwarfs for Kepler focal plane calibration purposes. All of these tasks can be accomplished using the Kitt Peak 4-m telescope and RCspec as shown by our previous time allocations.

VizieR Online Data Catalog: Basic properties of Kepler and CoRoT targets (Yildiz+, 2016)

NASA Astrophysics Data System (ADS)

Yildiz, M.; Celik Orhan, Z.; Kayhan, C.

2018-01-01

The basic data of certain Kepler (79 stars) and CoRoT (seven stars) target stars, compiled from the literature, are listed in Table A1. Oscillation frequencies of three stars (Procyon A, HD 2151 and HD 146233) were obtained from ground-based observations (Bedding et al., 2010ApJ...713..935B; Bedding et al., 2007ApJ...663.1315B and Bazot et al. 2012, Cat. J/A+A/544/A106, respectively). These stars are also listed in this table, with data for the Sun for comparison. For most stars, we provide B-V and V-K colours (SIMBAD data base) from photometric observations, and surface gravity [log(g)], effective temperature (TeS) and metallicity ([Fe/H]) from spectroscopic observations. (2 data files).

Hydrodynamic Simulations of Kepler's Supernova Remnant

NASA Astrophysics Data System (ADS)

Sullivan, Jessica; Blondin, John; Borkowski, Kazik; Reynolds, Stephen

2018-01-01

Kepler’s supernova remnant contains unusual features that strongly suggest an origin in a single-degenerate Type Ia explosion, including anisotropic circumstellar medium (CSM), a strong brightness gradient, and spatially varying expansion proper motions. We present 3Dhydrodynamic simulations to test a picture in which Kepler's progenitor binary emitted a strong asymmetric wind, densest in the orbital plane, while the system moved at high velocity through the ISM. We simulate the creation of the presupernova environment as well as the supernova blast wave, using the VH-1 grid-based hydrodynamics code. We first modeled an anisotropic wind to create an asymmetric bowshock around the progenitor, then the blast wave from thesupernova. The final simulation places both previous model pieces onto a single grid and allows the blast wave to expand into the bowshock. Models were completed on a Yin-Yang grids with matching angular resolutions. By manipulating parameters that control the asymmetry of the system, we attempted to find conditions that recreated the current state of Kepler. We analyzed these models by comparing images of Kepler from the Chandra X-ray Observatory to line-of-sight projections from the model results. We also present comparisons of simulated expansion velocities with recent observations of X-ray proper motions from Chandra images. We were able to produce models that contained similar features to those seen in Kepler. We find the greatest resemblance to Kepler images with a presupernova wind with an equator-to-pole density contrast of 3 and a moderately disk-like CSM at a 5° angle between equatorial plane and system motion.

NASA's Kepler Spacecraft Discovers Its First Rocky Planet

NASA Image and Video Library

2011-01-10

Animation narrated by Natalie Batalha, describing the location of Kepler-10b and the possible molten landscape. New Field-of-View animation by Marco Librero and new Kepler-10b animation by Dana Berry.

VizieR Online Data Catalog: Kepler follow-up observation program. I. Imaging (Furlan+, 2017)

NASA Astrophysics Data System (ADS)

Furlan, E.; Ciardi, D. R.; Everett, M. E.; Saylors, M.; Teske, J. K.; Horch, E. P.; Howell, S. B.; van Belle, G. T.; Hirsch, L. A.; Gautier, T. N.; Adams, E. R.; Barrado, D.; Cartier, K. M. S.; Dressing, C. D.; Dupree, A. K.; Gilliland, R. L.; Lillo-Box, J.; Lucas, P. W.; Wang, J.

2017-07-01

and then combining only those images with the best quality (i.e., with the highest Strehl ratios). The FWHM of the stellar PSF in their 24''*24'' images was typically 0.21'', which is somewhat larger than the value from AO images (~0.15''). HST imaging using WFC3 was carried out in the F555W and F775W bands (Cartier et al. 2015ApJ...804...97C; Gilliland et al. 2015AJ....149...24G). The images spanned a relatively large field of view of 40''*40'', and the typical FWHM of the stellar PSF was 0.08''. One additional facility, the 8m Large Binocular Telescope, was used with LMIRCam to observe 24 KOI host stars in the Ks band, but results have not yet been published and are not available on CFOP. Except for 1 of these 24 stars (which has only one false positive transit signal), all have been observed with one or more other facilities too. The Kepler field was observed at the United Kingdom Infrared Telescope (UKIRT) in 2010 using the UKIRT Wide Field Camera (WFCAM). The images were taken in the J band and have a typical spatial resolution of 0.8''-0.9''. Everett et al. (2012PASP..124..316E) carried out a survey of the Kepler field in 2011 using the NOAO Mosaic-1.1 Wide Field Imager on the WIYN 0.9m telescope. They observed the field in UBV filters; the FWHM of the stellar PSF due to seeing ranged from 1.2'' to 2.5'' in the V-band (with somewhat larger values in the U and B band). The source catalog and the images are available on CFOP. (6 data files).

Plans for Follow-Up Observations of Kepler Planet Candidates

NASA Astrophysics Data System (ADS)

Gautier, Thomas N., III

2009-05-01

Ground based follow-up observations of transiting planet candidates identified by Kepler are pursued to identify false positives and to search for non-transiting planets in the systems of true transiting planets. I will describe the observational protocols developed by the Kepler team and the web based infrastructure we are using to support the observations. The current state of the Kepler follow-up observations will be reported.

STELLAR MAGNETIC CYCLES IN THE SOLAR-LIKE STARS KEPLER-17 AND KEPLER-63

DOE Office of Scientific and Technical Information (OSTI.GOV)

Estrela, Raissa; Valio, Adriana, E-mail: rlf.estrela@gmail.com, E-mail: avalio@craam.mackenzie.br

2016-11-01

The stellar magnetic field plays a crucial role in the star internal mechanisms, as in the interactions with its environment. The study of starspots provides information about the stellar magnetic field and can characterize the cycle. Moreover, the analysis of solar-type stars is also useful to shed light onto the origin of the solar magnetic field. The objective of this work is to characterize the magnetic activity of stars. Here, we studied two solar-type stars, Kepler-17 and Kepler-63, using two methods to estimate the magnetic cycle length. The first one characterizes the spots (radius, intensity, and location) by fitting themore » small variations in the light curve of a star caused by the occultation of a spot during a planetary transit. This approach yields the number of spots present in the stellar surface and the flux deficit subtracted from the star by their presence during each transit. The second method estimates the activity from the excess in the residuals of the transit light curves. This excess is obtained by subtracting a spotless model transit from the light curve and then integrating all the residuals during the transit. The presence of long-term periodicity is estimated in both time series. With the first method, we obtained P {sub cycle} = 1.12 ± 0.16 year (Kepler-17) and P {sub cycle} = 1.27 ± 0.16 year (Kepler-63), and for the second approach the values are 1.35 ± 0.27 year and 1.27 ± 0.12 year, respectively. The results of both methods agree with each other and confirm their robustness.« less

Kepler-454b: Rocky or Not?

NASA Astrophysics Data System (ADS)

Kohler, Susanna

2016-02-01

Small exoplanets tend to fall into two categories: the smallest ones are predominantly rocky, like Earth, and the larger ones have a lower-density, more gaseous composition, similar to Neptune. The planet Kepler-454b was initially estimated to fall between these two groups in radius. So what is its composition?Small-Planet DichotomyThough Kepler has detected thousands of planet candidates with radii between 1 and 2.7 Earth radii, we have only obtained precise mass measurements for 12 of these planets.Mass-radius diagram (click for a closer look!) for planets with radius 2.7 Earth radii and well-measured masses. The six smallest planets (and Venus and Earth) fall along a single mass-radius curve of Earth-like composition. The six larger planets (including Kepler-454b) have lower-density compositions. [Gettel et al. 2016]These measurements, however, show an interesting dichotomy: planets with radii less than 1.6 Earth radii have rocky, Earth-like compositions, following a single relation between their mass and radius. Planets between 2 and 2.7 Earth radii, however, have lower densities and dont follow a single mass-radius relation. Their low densities suggest they contain a significant fraction of volatiles, likely in the form of a thick gas envelope of water, hydrogen, and/or helium.The planet Kepler-454b, discovered transiting a Sun-like star, was initially estimated to have a radius of 1.86 Earth radii placing it in between these two categories. A team of astronomers led by Sara Gettel (Harvard-Smithsonian Center for Astrophysics) have since followed up on the initial Kepler detection, hoping to determine the planets composition.Low-Density OutcomeGettel and collaborators obtained 63 observations of the host stars radial velocity with the HARPS-N spectrograph on the Telescopio Nazionale Galileo, and another 36 observations with the HIRES spectrograph at Keck Observatory. These observations allowed them to do several things:Obtain a more accurate radius estimate

From emblems to diagrams: Kepler's new pictorial language of scientific representation.

PubMed

Chen-Morris, Raz

2009-01-01

Kepler's treatise on optics of 1604 furnished, along with technical solutions to problems in medieval perspective, a mathematically-based visual language for the observation of nature. This language, based on Kepler's theory of retinal pictures, ascribed a new role to geometrical diagrams. This paper examines Kepler's pictorial language against the backdrop of alchemical emblems that flourished in and around the court of Rudolf II in Prague. It highlights the cultural context in which Kepler's optics was immersed, and the way in which Kepler attempted to demarcate his new science from other modes of the investigation of nature.

Kepler-Astronomer in Astrology and Astrologer in Astronomy

NASA Astrophysics Data System (ADS)

Fempl-Madjarevic, Jasna

The author is discussing a very complicated subject: the astrological aspects in the scientific activity of Johannes Kepler. Sometimes Kepler is considered the last astronomer which confused astrology with astronomy. In fact he composed horoscopes, but he was conscious finally that the astrology was a confusion. The author is discussing also the mistic aspects of the scientifc creation by Kepler. Particularly she emphasized that the "Mysterium Cosmographicum" is one of such works. Meanwhile, that work led to discovery of famous third laws of planets motion.

A Planet Hunters Search of the Kepler TCE Inventory

NASA Astrophysics Data System (ADS)

Schwamb, Meg; Lintott, Chris; Fischer, Debra; Smith, Arfon; Boyajian, Tabetha; Brewer, John; Giguere, Matt; Lynn, Stuart; Schawinski, Kevin; Simpson, Rob; Wang, Ji

2013-07-01

NASA's Kepler spacecraft has spent the past 4 years monitoring ~160,000 stars for the signatures of transiting exoplanets. Planet Hunters (http://www.planethunters.org), part of the Zooniverse (http://www.zooniverse.org) collection of citizen science projects, uses the power of human pattern recognition via the World Wide Web to identify transits in the Kepler public data. We have demonstrated the success of a citizen science approach with the project's discoveries including PH1 b, a transiting circumbinary planet in a four star system., and over 20 previously unknown planet candidates. The Kepler team has released the list of 18,406 potential transit signals or threshold-crossing events (TCEs) identified in Quarters 1-12 (~1000 days) by their automated Transit Planet Search (TPS) algorithm. The majority of these detections found by TPS are triggered by transient events and are not valid planet candidates. To identify planetary candidates from the detected TCEs, a human review of the validation reports, generated by the Kepler pipeline for each TCE, is performed by several Kepler team members. We have undertaken an independent crowd-sourced effort to perform a systematic search of the Kepler Q1-12 TCE list. With the Internet we can obtain multiple assessments of each TCE's data validation report. Planet Hunters volunteers evaluate whether a transit is visible in the Kepler light curve folded on the expected period identified by TPS. We present the first results of this analysis.

Re-cataloging Joint Astronomy Centre (JAC) Library Book Collection

NASA Astrophysics Data System (ADS)

Lucas, A.; Zhang, X.

2007-10-01

The Joint Astronomy Centre operates two telescopes: the James Clerk Maxwell Telescope and the United Kingdom Infrared Telescope. In the JAC's 25-year history, their library was maintained by a number of staff ranging from scientists to student assistants. This resulted in an inconsistent and incomplete catalog as well as a mixture of typed, hand written, and inaccurate call number labels. Further complicating the situation was a backlog of un-cataloged books. In the process of improving the library system, it became obvious that the entire book collection needed to be re-cataloged and re-labeled. Readerware proved to be an inexpensive and efficient tool for this project. The software allows for the scanning of barcodes or the manual input of ISBNs, LCCNs and UPCs. It then retrieves the cataloging records from a number of pre-selected websites. The merged information is then stored in a database that can be manipulated to perform tasks such as printing call number labels. Readerware is also ideal for copy cataloging and has become an indispensable tool in maintaining the JAC's collection of books.

An independent planet search in the Kepler dataset. II. An extremely low-density super-Earth mass planet around Kepler-87

NASA Astrophysics Data System (ADS)

Ofir, Aviv; Dreizler, Stefan; Zechmeister, Mathias; Husser, Tim-Oliver

2014-01-01

Context. The primary goal of the Kepler mission is the measurement of the frequency of Earth-like planets around Sun-like stars. However, the confirmation of the smallest of Kepler's candidates in long periods around FGK dwarfs is extremely difficult or even beyond the limit of current radial velocity technology. Transit timing variations (TTVs) may offer the possibility for these confirmations of near-resonant multiple systems by the mutual gravitational interaction of the planets. Aims: We previously detected the second planet candidate in the KOI 1574 system. The two candidates have relatively long periods (about 114 d and 191 d) and are in 5:3 resonance. We therefore searched for TTVs in this particularly promising system. Methods: The full Kepler data was detrended with the proven SARS pipeline. The entire data allowed one to search for TTVs of the above signals, and to search for additional transit-like signals. Results: We detected strong anti-correlated TTVs of the 114 d and 191 d signals, dynamically confirming them as members of the same system. Dynamical simulations reproducing the observed TTVs allowed us to also determine the masses of the planets. We found KOI 1574.01 (hereafter Kepler-87 b) to have a radius of 13.49 ± 0.55 R⊕ and a mass of 324.2 ± 8.8 M⊕, and KOI 1574.02 (Kepler-87 c) to have a radius of 6.14 ± 0.29 R⊕ and a mass of 6.4 ± 0.8 M⊕. Both planets have low densities of 0.729 and 0.152 g cm-3, respectively, which is non-trivial for such cold and old (7-8 Gyr) planets. Specifically, Kepler-87 c is the lowest-density planet in the super-Earth mass range. Both planets are thus particularly amenable to modeling and planetary structure studies, and also present an interesting case where ground-based photometric follow-up of Kepler planets is very desirable. Finally, we also detected two more short-period super-Earth sized (<2 R⊕) planetary candidates in the system, making the relatively high multiplicity of this system notable

LANDSAT: Non-US standard catalog no. N-36. [LANDSAT imagery for August, 1975

NASA Technical Reports Server (NTRS)

1975-01-01

Information regarding the availability of LANDSAT imagery processed and input to the data files by the NASA Data Processing Facility is published on a monthly basis. The U.S. Standard Catalog includes imagery covering the continental United States, Alaska, and Hawaii. The Non-U.S. Standard Catalog identifies all the remaining coverage. Sections 1 and 2 describe the contents and format for the catalogs and the associated microfilm. Section 3 provides a cross reference defining the beginning and ending dates for LANDSAT cycles.

LANDSAT: Non-US standard catalog no. N-30. [LANDSAT imagery for February, 1975

NASA Technical Reports Server (NTRS)

1975-01-01

Information regarding the availability of LANDSAT imagery processed and input to the data files by the NASA Data Processing Facility is published on a monthly basis. The U.S. Standard Catalog includes imagery covering the continental United States, Alaska, and Hawaii. The Non-U.S. Standard Catalog identifies all the remaining coverage. Sections 1 and 2 describe the contents and format for the catalogs and the associated microfilm. Section 3 provides a cross-reference defining the beginning and ending dates for LANDSAT cycles.

Kepler Certified False Positive Table

NASA Technical Reports Server (NTRS)

Bryson, Stephen T.; Batalha, Natalie Marie; Colon, Knicole Dawn; Coughlin, Jeffrey Langer; Haas, Michael R.; Henze, Chris; Huber, Daniel; Morton, Tim; Rowe, Jason Frank; Mullally, Susan Elizabeth;

No Metallicity Correlation Associated with the Kepler Dichotomy

NASA Astrophysics Data System (ADS)

Munoz Romero, Carlos Eduardo; Kempton, Eliza

2018-01-01

NASA’s Kepler mission has discovered thousands of planetary systems, ∼ 20% of which are found to host multiple transiting planets. This relative paucity (compared to the high fraction of single transiting systems) is postulated to result from a distinction in the architecture between multi-transiting systems and those hosting a single transiting planet: a phenomenon usually referred to as the Kepler dichotomy. We investigate the hypothesis that external giant planets are the main cause behind the over-abundance of single- relative to multi-transiting systems, which would be signaled by higher metallicities in the former sample. To this end, we perform a statistical analysis on the stellar metallicity distribution with respect to planet multiplicity in the Kepler data. We perform our analysis on a variety of samples taken from a population of 1062 Kepler main sequence planetary hosts, using precisely determined metallicities from the California-Kepler survey. Contrary to some predictions, we do not find a significant difference between the stellar metallicities of the single- and multiple-transiting planet systems. However, we do find a 43% upper bound for systems with a single non-giant planet that could also host a hidden giant planet, based on metallicity considerations. While the presence of external giant planets might be one factor behind the Kepler dichotomy, our results also favor alternative explanations. We suggest that additional radial velocity and direct imaging measurements are necessary to constrain the presence of gas giants in systems with a single transiting planet.

Identifying Young Kepler Planet Host Stars from Keck–HIRES Spectra of Lithium

NASA Astrophysics Data System (ADS)

Berger, Travis A.; Howard, Andrew W.; Boesgaard, Ann Merchant

2018-03-01

The lithium doublet at 6708 Å provides an age diagnostic for main sequence FGK dwarfs. We measured the abundance of lithium in 1305 stars with detected transiting planets from the Kepler mission using high-resolution spectroscopy. Our catalog of lithium measurements from this sample has a range of abundance from A(Li) = 3.11 ± 0.07 to an upper limit of ‑0.84 dex. For a magnitude-limited sample that comprises 960 of the 1305 stars, our Keck–HIRES spectra have a median signal-to-noise ratio of 45 per pixel at ∼6700 Å with spectral resolution \\tfrac{λ }{{{Δ }}λ } = R = 55,000. We identify 80 young stars that have A(Li) values greater than the Hyades at their respective effective temperatures; these stars are younger than ∼650 Myr, the approximate age of the Hyades. We then compare the distribution of A(Li) with planet size, multiplicity, orbital period, and insolation flux. We find larger planets preferentially in younger systems, with an A–D two-sided test p-value = 0.002, a > 3σ confidence that the older and younger planet samples do not come from the same parent distribution. This is consistent with planet inflation/photoevaporation at early ages. The other planet parameters (Kepler planet multiplicity, orbital period, and insolation flux) are uncorrelated with age. Based on observations obtained at the W. M. Keck Observatory, which is operated jointly by the University of California and the California Institute of Technology. Keck time has been granted by the University of Hawaii, the University of California, and Caltech.

The Future of Catalogers and Cataloging.

ERIC Educational Resources Information Center

Holley, Robert P.

1981-01-01

Future emphasis in cataloging will be on the sharing of high quality bibliographic records through a national network. As original cataloging decreases, catalogers, rather than disappearing, will more likely be managers of the library's bibliographic control system. (Author/RAA)

Improved parameters of seven Kepler giant companions characterized with SOPHIE and HARPS-N

NASA Astrophysics Data System (ADS)

Bonomo, A. S.; Sozzetti, A.; Santerne, A.; Deleuil, M.; Almenara, J.-M.; Bruno, G.; Díaz, R. F.; Hébrard, G.; Moutou, C.

2015-03-01

Radial-velocity observations of Kepler candidates obtained with the SOPHIE and HARPS-N spectrographs have permitted unveiling the nature of the five giant planets Kepler-41b, Kepler-43b, Kepler-44b, Kepler-74b, and Kepler-75b, the massive companion Kepler-39b, and the brown dwarf KOI-205b. These companions were previously characterized with long-cadence (LC) Kepler data. Here we aim at refining the parameters of these transiting systems by i) modelling the published radial velocities and Kepler short-cadence (SC) data that provide a much better sampling of the transits; ii) performing new spectral analyses of the SOPHIE and ESPaDOnS spectra, after improving our procedure for selecting and co-adding the SOPHIE spectra of faint stars (Kp ≳ 14); and iii) improving stellar rotation periods hence stellar age estimates through gyrochronology, when possible, by using all the available LC data up to quarter Q17. Posterior distributions of the system parameters were derived with a differential evolution Markov chain Monte Carlo approach. Our main results are as follows: a) Kepler-41b is significantly larger and less dense than previously found because a lower orbital inclination is favoured by SC data. This also affects the determination of the geometric albedo that is lower than previously derived: Ag< 0.135; b) Kepler-44b is moderately smaller and denser than reported in the discovery paper, as a consequence of the slightly shorter transit duration found with SC data; c) good agreement was achieved with published Kepler-43, Kepler-75, and KOI-205 system parameters, although the host stars Kepler-75 and KOI-205 were found to be slightly richer in metals and hotter, respectively; d) the previously reported non-zero eccentricities of Kepler-39b and Kepler-74b might be spurious. If their orbits were circular, the two companions would be smaller and denser than in the eccentric case. The radius of Kepler-39b is still larger than predicted by theoretical isochrones. Its

Kepler Mission: Current Status

NASA Astrophysics Data System (ADS)

Borucki, William J.; Koch, D. G.; Lissauer, J. J.; Bryson, S.; Natalie, B.; Caldwell, D. A.; DeVore, E.; Jenkins, J. M.; Christensen-Dalsgaard, J.; Cochran, W. D.; Dunham, E. W.; Gautier, T. N.; Geary, J. C.; Latham, D. W.; Sasselov, D.; Gilliland, R. L.; Gould, A.; Howell, S. B.; Monet, D. G.

2007-12-01

Kepler is a Discovery-class mission designed to determine the frequency of Earth-size planets in and near the habitable zone of solar-like stars. The instrument consists of a high precision photometer with Schmidt-type optics and a focal plane containing 95 million pixels to monitor over 100,000 stars to search for patterns of transits generated by planets as small as Mars. The recent reduction in the mission duration is discussed with regard to the impact on the expected science product and null statistics. Both terrestrial and giant planets discoveries will be followed up with ground-based Doppler-velocity observations to determine mass and density. The first meeting of Kepler Asteroseismic Science Consortium was held in Paris to organize an international team to analyze the Kepler data to determine the characteristics of the brighter target stars including their size and age. Stellar size determinations accurate to a few percent are expected. These will allow very accurate planet sizes to be determined from the depth of the transit signals. NASA HQ received thirty six proposals for the Participating Scientist Program and chose several new members to join the Science Team. Both the 0.95 m Schmidt corrector and 1.4 m aperture primary mirror have been completed and delivered for integration into the photometer. The focal plane with forty-two science CCD detectors and their processing electronics has been assembled and tested. The spacecraft assembly has begun with the mounting of the reaction control system, reaction wheels, attitude determination & control system, and power systems. Both the photometer and spacecraft are nearing final assembly with all subsystems having passed their environmental and performance testing. The photometer to spacecraft integration will begin this spring. The Mission is on schedule for a launch in February 2009. The Kepler Mission is funded by the NASA Astrophysics Division, Science Mission Directorate.

Visualization of Kepler's Laws of Planetary Motion

ERIC Educational Resources Information Center

Lu, Meishu; Su, Jun; Wang, Weiguo; Lu, Jianlong

2017-01-01

For this article, we use a 3D printer to print a surface similar to universal gravitation for demonstrating and investigating Kepler's laws of planetary motion describing the motion of a small ball on the surface. This novel experimental method allows Kepler's laws of planetary motion to be visualized and will contribute to improving the…

Rediscovering Kepler's laws using Newton's gravitation law and NASA data

NASA Astrophysics Data System (ADS)

Springsteen, Paul; Keith, Jason

2010-03-01

Kepler's three laws of planetary motion were originally discovered by using data acquired from Tycho Brache's naked eye observations of the planets. We show how Kepler's third law can be reproduced using planetary data from NASA. We will also be using Newton's Gravitational law to explain why Kepler's three laws exist as they do.

Masses of Kepler-46b, c from Transit Timing Variations

NASA Astrophysics Data System (ADS)

Saad-Olivera, Ximena; Nesvorný, David; Kipping, David M.; Roig, Fernando

2017-04-01

We use 16 quarters of the Kepler mission data to analyze the transit timing variations (TTVs) of the extrasolar planet Kepler-46b (KOI-872). Our dynamical fits confirm that the TTVs of this planet (period P={33.648}-0.005+0.004 days) are produced by a non-transiting planet Kepler-46c (P={57.325}-0.098+0.116 days). The Bayesian inference tool MultiNest is used to infer the dynamical parameters of Kepler-46b and Kepler-46c. We find that the two planets have nearly coplanar and circular orbits, with eccentricities ≃ 0.03 somewhat higher than previously estimated. The masses of the two planets are found to be {M}b={0.885}-0.343+0.374 and {M}c={0.362}-0.016+0.016 Jupiter masses, with M b being determined here from TTVs for the first time. Due to the precession of its orbital plane, Kepler-46c should start transiting its host star a few decades from now.

geoKepler Workflow Module for Computationally Scalable and Reproducible Geoprocessing and Modeling

NASA Astrophysics Data System (ADS)

Cowart, C.; Block, J.; Crawl, D.; Graham, J.; Gupta, A.; Nguyen, M.; de Callafon, R.; Smarr, L.; Altintas, I.

2015-12-01

The NSF-funded WIFIRE project has developed an open-source, online geospatial workflow platform for unifying geoprocessing tools and models for for fire and other geospatially dependent modeling applications. It is a product of WIFIRE's objective to build an end-to-end cyberinfrastructure for real-time and data-driven simulation, prediction and visualization of wildfire behavior. geoKepler includes a set of reusable GIS components, or actors, for the Kepler Scientific Workflow System (https://kepler-project.org). Actors exist for reading and writing GIS data in formats such as Shapefile, GeoJSON, KML, and using OGC web services such as WFS. The actors also allow for calling geoprocessing tools in other packages such as GDAL and GRASS. Kepler integrates functions from multiple platforms and file formats into one framework, thus enabling optimal GIS interoperability, model coupling, and scalability. Products of the GIS actors can be fed directly to models such as FARSITE and WRF. Kepler's ability to schedule and scale processes using Hadoop and Spark also makes geoprocessing ultimately extensible and computationally scalable. The reusable workflows in geoKepler can be made to run automatically when alerted by real-time environmental conditions. Here, we show breakthroughs in the speed of creating complex data for hazard assessments with this platform. We also demonstrate geoKepler workflows that use Data Assimilation to ingest real-time weather data into wildfire simulations, and for data mining techniques to gain insight into environmental conditions affecting fire behavior. Existing machine learning tools and libraries such as R and MLlib are being leveraged for this purpose in Kepler, as well as Kepler's Distributed Data Parallel (DDP) capability to provide a framework for scalable processing. geoKepler workflows can be executed via an iPython notebook as a part of a Jupyter hub at UC San Diego for sharing and reporting of the scientific analysis and results from

The Scattering Outcomes of Kepler Circumbinary Planets: Planet Mass Ratio

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gong, Yan-Xiang; Ji, Jianghui, E-mail: yxgong@pmo.ac.cn, E-mail: jijh@pmo.ac.cn

Recent studies reveal that the free eccentricities of Kepler-34b and Kepler-413b are much larger than their forced eccentricities, implying that scattering events may take place in their formation. The observed orbital configuration of Kepler-34b cannot be well reproduced in disk-driven migration models, whereas a two-planet scattering scenario can play a significant role of shaping the planetary configuration. These studies indicate that circumbinary planets discovered by Kepler may have experienced scattering process. In this work, we extensively investigate the scattering outcomes of circumbinary planets focusing on the effects of planet mass ratio . We find that the planetary mass ratio andmore » the the initial relative locations of planets act as two important parameters that affect the eccentricity distribution of the surviving planets. As an application of our model, we discuss the observed orbital configurations of Kepler-34b and Kepler-413b. We first adopt the results from the disk-driven models as the initial conditions, then simulate the scattering process that occurs in the late evolution stage of circumbinary planets. We show that the present orbital configurations of Kepler-34b and Kepler-413b can be well reproduced when considering a two unequal-mass planet ejection model. Our work further suggests that some of the currently discovered circumbinary single-planet systems may be survivors of original multiple-planet systems. The disk-driven migration and scattering events occurring in the late stage both play an irreplaceable role in sculpting the final systems.« less

Revised Masses and Densities of the Planets around Kepler-10

NASA Astrophysics Data System (ADS)

Weiss, Lauren M.; Rogers, Leslie A.; Isaacson, Howard T.; Agol, Eric; Marcy, Geoffrey W.; Rowe, Jason F.; Kipping, David; Fulton, Benjamin J.; Lissauer, Jack J.; Howard, Andrew W.; Fabrycky, Daniel

2016-03-01

Determining which small exoplanets have stony-iron compositions is necessary for quantifying the occurrence of such planets and for understanding the physics of planet formation. Kepler-10 hosts the stony-iron world Kepler-10b, and also contains what has been reported to be the largest solid silicate-ice planet, Kepler-10c. Using 220 radial velocities (RVs), including 72 precise RVs from Keck-HIRES of which 20 are new from 2014 to 2015, and 17 quarters of Kepler photometry, we obtain the most complete picture of the Kepler-10 system to date. We find that Kepler-10b ({R}{{p}}=1.47 {R}\\oplus ) has mass 3.72\\quad +/- \\quad 0.42\\quad {M}\\oplus and density 6.46\\quad +/- \\quad 0.73\\quad {{g}} {{cm}}-3. Modeling the interior of Kepler-10b as an iron core overlaid with a silicate mantle, we find that the iron core constitutes 0.17 ± 0.11 of the planet mass. For Kepler-10c ({R}{{p}}=2.35 {R}\\oplus ) we measure mass 13.98\\quad +/- \\quad 1.79\\quad {M}\\oplus and density 5.94\\quad +/- \\quad 0.76\\quad {{g}} {{cm}}-3, significantly lower than the mass computed in Dumusque et al. (17.2+/- 1.9 {M}\\oplus ). Our mass measurement of Kepler-10c rules out a pure stony-iron composition. Internal compositional modeling reveals that at least 10% of the radius of Kepler-10c is a volatile envelope composed of hydrogen-helium (0.2% of the mass, 16% of the radius) or super-ionic water (28% of the mass, 29% of the radius). However, we note that analysis of only HIRES data yields a higher mass for planet b and a lower mass for planet c than does analysis of the HARPS-N data alone, with the mass estimates for Kepler-10 c being formally inconsistent at the 3σ level. Moreover, dividing the data for each instrument into two parts also leads to somewhat inconsistent measurements for the mass of planet c derived from each observatory. Together, this suggests that time-correlated noise is present and that the uncertainties in the masses of the planets (especially planet c) likely

Asteroseismic inversions in the Kepler era: application to the Kepler Legacy sample

NASA Astrophysics Data System (ADS)

Buldgen, Gaël; Reese, Daniel; Dupret, Marc-Antoine

2017-10-01

In the past few years, the CoRoT and Kepler missions have carried out what is now called the space photometry revolution. This revolution is still ongoing thanks to K2 and will be continued by the Tess and Plato2.0 missions. However, the photometry revolution must also be followed by progress in stellar modelling, in order to lead to more precise and accurate determinations of fundamental stellar parameters such as masses, radii and ages. In this context, the long-lasting problems related to mixing processes in stellar interior is the main obstacle to further improvements of stellar modelling. In this contribution, we will apply structural asteroseismic inversion techniques to targets from the Kepler Legacy sample and analyse how these can help us constrain the fundamental parameters and mixing processes in these stars. Our approach is based on previous studies using the SOLA inversion technique [1] to determine integrated quantities such as the mean density [2], the acoustic radius, and core conditions indicators [3], and has already been successfully applied to the 16Cyg binary system [4]. We will show how this technique can be applied to the Kepler Legacy sample and how new indicators can help us to further constrain the chemical composition profiles of stars as well as provide stringent constraints on stellar ages.

Teacher Professional Development: Lessons Learned from Six Kepler Mission Workshops

NASA Astrophysics Data System (ADS)

DeVore, Edna; Harman, P.; Gould, A.; Koch, D.

2010-01-01

NASA's Kepler Mission conducted teacher professional development workshops on the search for exoplanets in the habitable zone of Sun-like stars. During late 2008 and into 2009, six workshops were conducted surrounding the launch of the Kepler Mission. These were a part of the Kepler Mission's outreach honoring the International Year of Astronomy. Each workshop was supported by a Kepler team scientist, two Education & Public Outreach staff and local hosts. Activities combined a science content lecture and discussion, making models, kinesthetic activities, and interpretation of transit data. The emphasis was on inquiry-based instruction and supported science education standards in grades 7-12. Participants’ kit included an orrery, optical sensor and software to demonstrate transit detection. The workshop plan, teaching strategies, and lessons learned from evaluation will be discussed. The Kepler Mission teacher professional development workshops were designed using the best practices and principals from the National Science Education Standards and similar documents. Sharing the outcome of our plans, strategies and evaluation results can be of use to other Education and Public Outreach practitioners who plan similar events. In sharing our experiences, we hope to assist others, and to learn from them as well. Future events are planned. Supported by NASA Grants to the SETI Institute: NAG2-6066 Kepler Education and Public Outreach and NNX08BA74G, IYA Kepler Mission Pre-launch Workshops.

Three Great Eyes on Kepler Supernova Remnant

NASA Image and Video Library

2004-10-06

blue) is locatedprimarily in the regions directly behind the shock front. These regions alsoshow up in the Hubble observations, and also align with the faint rim of glowingmaterial seen in the Spitzer data. The X-rays from the region on the lower left(colored blue) may be dominated by extremely high-energy electrons that wereproduced by the shock wave and are radiating at radio through X-ray wavelengthsas they spiral in the intensified magnetic field behind the shock front. CoolerX-ray gas (lower-energy X-rays, colored green) resides in a thick interior shelland marks the location of heated material expelled from the exploded star. Kepler's supernova, the last such object seen to explode in our Milky Waygalaxy, resides about 13,000 light-years away in the constellation Ophiuchus. The Chandra observations were taken in June 2000, the Hubble in August 2003;and the Spitzer in August 2004. http://photojournal.jpl.nasa.gov/catalog/PIA06907

Kepler unbound: Some elegant curiosities of classical mechanics

NASA Astrophysics Data System (ADS)

MacKay, Niall J.; Salour, Sam

2015-01-01

We explain two exotic systems of classical mechanics: the McIntosh-Cisneros-Zwanziger ("MICZ") Kepler system, of motion of a charged particle in the presence of a modified dyon; and Gibbons and Manton's description of the slow motion of well-separated solitonic ("BPS") monopoles using Taub-NUT space. Each system is characterized by the conservation of a Laplace-Runge-Lenz vector, and we use elementary vector techniques to show that each obeys a subtly different variation on Kepler's three laws for the Newton-Coulomb two-body problem, including a new modified Kepler third law for BPS monopoles.

What's the Kepler Spacecraft Been Up To?

NASA Astrophysics Data System (ADS)

Kohler, Susanna

2016-03-01

Remember back in May 2013 when the second of Keplers reaction wheels failed, rendering it unable to control its precision pointing? As a result of a clever backup plan by intrepid scientists, Kepler is still going strong! This January, a paper was published describing some of the results from the first year of the extended Kepler mission, known as K2.K2: A Second ChanceHistograms of the K2 planet candidate sample (solid yellow) compared with planet candidates from the first four months of Kepler observations (blue diagonal lines). The histograms compare planet radius, orbital period, and brightness. [Vanderburg et al. 2016]After an incredibly successful five years discovering transiting exoplanets, the failure of two of Keplers reaction wheels (which allow it to maintain its orientation) looked like it would shut down the mission. Luckily, the scientific community came up with the ingenious plan of stabilizing the telescope using the radiation pressure exerted by the Sun. Though this solution limits Kepler to observing within the ecliptic plane, it has provided a new life lease for the project.Despite the significantly worsened pointing precision in the K2 mission, new analysis techniques have been developed that decouple the motion of the spacecraft from its observations, resulting in an observational precision for K2 thats within 35% of the original precision achieved by Kepler.Using these techniques, a team of scientists led by Andrew Vanderburg (HarvardSmithsonian Center for Astrophysics) analyzed the publicly released data from the first year of the K2 mission. In a new study, they describe the results from the 59,174 targets that Kepler has observed in that time.Planetary CandidatesVanderburg and collaborators report that K2 has detected 234 planetary candidates around 208 stars in its first year. These candidates span a range of sizes from gas-giant to smaller than the Earth, and have orbital periods that range from hours to more than a month. The list

The Kepler DB: a database management system for arrays, sparse arrays, and binary data

NASA Astrophysics Data System (ADS)

McCauliff, Sean; Cote, Miles T.; Girouard, Forrest R.; Middour, Christopher; Klaus, Todd C.; Wohler, Bill

2010-07-01

The Kepler Science Operations Center stores pixel values on approximately six million pixels collected every 30 minutes, as well as data products that are generated as a result of running the Kepler science processing pipeline. The Kepler Database management system (Kepler DB)was created to act as the repository of this information. After one year of flight usage, Kepler DB is managing 3 TiB of data and is expected to grow to over 10 TiB over the course of the mission. Kepler DB is a non-relational, transactional database where data are represented as one-dimensional arrays, sparse arrays or binary large objects. We will discuss Kepler DB's APIs, implementation, usage and deployment at the Kepler Science Operations Center.

The Kepler DB, a Database Management System for Arrays, Sparse Arrays and Binary Data

NASA Technical Reports Server (NTRS)

McCauliff, Sean; Cote, Miles T.; Girouard, Forrest R.; Middour, Christopher; Klaus, Todd C.; Wohler, Bill

2010-01-01

The Kepler Science Operations Center stores pixel values on approximately six million pixels collected every 30-minutes, as well as data products that are generated as a result of running the Kepler science processing pipeline. The Kepler Database (Kepler DB) management system was created to act as the repository of this information. After one year of ight usage, Kepler DB is managing 3 TiB of data and is expected to grow to over 10 TiB over the course of the mission. Kepler DB is a non-relational, transactional database where data are represented as one dimensional arrays, sparse arrays or binary large objects. We will discuss Kepler DB's APIs, implementation, usage and deployment at the Kepler Science Operations Center.

Likely transiting exocomets detected by Kepler

NASA Astrophysics Data System (ADS)

Rappaport, S.; Vanderburg, A.; Jacobs, T.; LaCourse, D.; Jenkins, J.; Kraus, A.; Rizzuto, A.; Latham, D. W.; Bieryla, A.; Lazarevic, M.; Schmitt, A.

2018-02-01

We present the first good evidence for exocomet transits of a host star in continuum light in data from the Kepler mission. The Kepler star in question, KIC 3542116, is of spectral type F2V and is quite bright at Kp = 10. The transits have a distinct asymmetric shape with a steeper ingress and slower egress that can be ascribed to objects with a trailing dust tail passing over the stellar disc. There are three deeper transits with depths of ≃ 0.1 per cent that last for about a day, and three that are several times more shallow and of shorter duration. The transits were found via an exhaustive visual search of the entire Kepler photometric data set, which we describe in some detail. We review the methods we use to validate the Kepler data showing the comet transits, and rule out instrumental artefacts as sources of the signals. We fit the transits with a simple dust-tail model, and find that a transverse comet speed of ˜35-50 km s-1 and a minimum amount of dust present in the tail of ˜1016 g are required to explain the larger transits. For a dust replenishment time of ˜10 d, and a comet lifetime of only ˜300 d, this implies a total cometary mass of ≳3 × 1017 g, or about the mass of Halley's comet. We also discuss the number of comets and orbital geometry that would be necessary to explain the six transits detected over the 4 yr of Kepler prime-field observations. Finally, we also report the discovery of a single comet-shaped transit in KIC 11084727 with very similar transit and host-star properties.

Selecting Pixels for Kepler Downlink

NASA Technical Reports Server (NTRS)

Bryson, Stephen T.; Jenkins, Jon M.; Klaus, Todd C.; Cote, Miles T.; Quintana, Elisa V.; Hall, Jennifer R.; Ibrahim, Khadeejah; Chandrasekaran, Hema; Caldwell, Douglas A.; Van Cleve, Jeffrey E.;

Kepler-Astronomer in Astrology and Astrologer in Astronomy

NASA Astrophysics Data System (ADS)

Fempl-Madarevic, Jasna

The author is discussing the role of astrology and mysticism in the scientific work by Johannes Kepler. This subject is as more important as the astrology and mysticism are actually very widespread. The author is separating the mathematical proofs in the Kepler's writings from astrological beliefs.

Kepler-20e -- The Smallest Exoplanet Artist Concept

NASA Image and Video Library

2011-12-20

Kepler-20e is the first planet smaller than the Earth discovered to orbit a star other than the sun. A year on Kepler-20e only lasts 6 days, as it is much closer to its host star than the Earth is to the sun.

The Kepler Science Operations Center Pipeline Framework Extensions

NASA Technical Reports Server (NTRS)

Klaus, Todd C.; Cote, Miles T.; McCauliff, Sean; Girouard, Forrest R.; Wohler, Bill; Allen, Christopher; Chandrasekaran, Hema; Bryson, Stephen T.; Middour, Christopher; Caldwell, Douglas A.;

Transit Timing Variation analysis with Kepler light curves of KOI 227 and Kepler 93b

NASA Astrophysics Data System (ADS)

Dulz, Shannon; Reed, Mike

2017-01-01

By searching for transit signals in approximately 150,000 stars, NASA’s Kepler Space telescope found thousands of exoplanets over its primary mission from 2009 to 2013 (Tenenbaum et al. 2014, ApJS, 211, 6). Yet, a detailed follow-up examination of Kepler light curves may contribute more evidence on system dynamics and planetary atmospheres of these objects. Kepler’s continuous observing of these systems over the mission duration produced light curves of sufficient duration to allow for the search for transit timing variations. Transit timing variations over the course of many orbits may indicate a precessing orbit or the existence of a non-transiting third body such as another exoplanet. Flux contributions of the planet just prior to secondary eclipse may provide a measurement of bond albedo from the day-side of the transiting planet. Any asymmetries of the transit shape may indicate thermal asymmetries which can measure upper atmosphere motion of the planet. These two factors can constrain atmospheric models of close orbiting exoplanets. We first establish our procedure with the well-documented TTV system, KOI 227 (Nesvorny et al. 2014, ApJ, 790, 31). Using the test case of KOI 227, we analyze Kepler-93b for TTVs and day-side flux contributions. Kepler-93b is likely a rocky planet with R = 1.50 ± 0.03 Earth Radii and M = 2.59 ± 2.0 Earth Masses (Marcy et al. 2014, ApJS, 210, 20). This research is funded by a NASA EPSCoR grant.

Photometry Using Kepler "Superstamps" of Open Clusters NGC 6791 & NGC 6819

NASA Astrophysics Data System (ADS)

Kuehn, Charles A.; Drury, Jason A.; Bellamy, Beau R.; Stello, Dennis; Bedding, Timothy R.; Reed, Mike; Quick, Breanna

2015-09-01

The Kepler space telescope has proven to be a gold mine for the study of variable stars. Usually, Kepler only reads out a handful of pixels around each pre-selected target star, omitting a large number of stars in the Kepler field. Fortunately, for the open clusters NGC 6791 and NGC 6819, Kepler also read out larger "superstamps" which contained complete images of the central region of each cluster. These cluster images can be used to study additional stars in the open clusters that were not originally on Kepler's target list. We discuss our work on using two photometric techniques to analyze these superstamps and present sample results from this project to demonstrate the value of this technique for a wide variety of variable stars.

Kepler's relation to the Jesuits-A study of his correspondence with Paul Guldin.

PubMed

Schuppener, Georg

1997-12-01

First, this article provides a survey of the kind of relationship that existed between Kepler and the Jesuits. Afterwards, it is pondered upon the likelihood of their having been in direct contact with each other while Kepler lived in Prague. The second part of the article is devoted to an investigation into the correspondence between Kepler and Paul Guldin as an example. Thus, the paper describes the key issues of those letters and concludes from this Guldin's attitude to Kepler and the resulting commitment to Kepler's affairs. Finally, the article examines whether the assumption that Kepler and Guldin later discontinued their correspondence intensionally is verifiable and plausible.

THE INTERSTELLAR MEDIUM IN THE KEPLER SEARCH VOLUME

DOE Office of Scientific and Technical Information (OSTI.GOV)

Johnson, Marshall C.; Redfield, Seth; Jensen, Adam G., E-mail: mjohnson@astro.as.utexas.edu

2015-07-10

The properties of the interstellar medium (ISM) surrounding a planetary system can impact planetary climate through a number of mechanisms, including changing the size of the astrosphere (one of the major shields for cosmic rays) as well as direct deposition of material into planetary atmospheres. In order to constrain the ambient ISM conditions for exoplanetary systems, we present observations of interstellar Na i and K i absorption toward seventeen early type stars in the Kepler prime mission field of view (FOV). We identify 39 Na i and 8 K i velocity components, and attribute these to 11 ISM clouds. Sixmore » of these are detected toward more than one star, and for these clouds we put limits on the cloud properties, including distance and hydrogen number density. We identify one cloud with significant (≳1.5 cm{sup −3}) hydrogen number density located within the nominal ∼100 pc boundary of the Local Bubble. We identify systems with confirmed planets within the Kepler FOV that could lie within these ISM clouds, and estimate upper limits on the astrosphere sizes of these systems under the assumption that they do lie within these clouds. Under this condition, the Kepler-20, 42, and 445 multiplanet systems could have compressed astrospheres much smaller than the present-day heliosphere. Among the known habitable zone planet hosts, Kepler-186 could have an astrosphere somewhat smaller than the heliosphere, while Kepler-437 and KOI-4427 could have astrospheres much larger than the heliosphere. The thick disk star Kepler-444 may have an astrosphere just a few AU in radius.« less

Reborn Kepler Discovers First K2 Exoplanet Artist Concept

NASA Image and Video Library

2014-12-18

This artist concept shows NASA planet-hunting Kepler spacecraft operating in a new mission profile called K2. Using publicly available data, astronomers have confirmed K2 first exoplanet discovery proving Kepler can still find planets.

Johannes Kepler on Christmas

NASA Astrophysics Data System (ADS)

Kemp, Martin

2009-12-01

Kepler's interpretation of the supernova of 1604, De Stella Nova, interwove the science of astronomy with astrology and theology in an attempt to determine the correct birthdate of Jesus, explains Martin Kemp.

LANDSAT 2 cumulative non-US standard catalog

NASA Technical Reports Server (NTRS)

1977-01-01

The Non-U.S. Standard Catalog lists imagery acquired by LANDSAT 1 and LANDSAT 2 which has been processed and input to the data files during the referred month. Data, such as data acquired, cloud cover and image quality are given for each scene. The microfilm roll and frame on which the scene may be found is also given.

Compositional Constraints on the Best Characterized Rocky Exoplanet, Kepler-36 b

NASA Astrophysics Data System (ADS)

Rogers, Leslie; Deck, Katherine; Lissauer, Jack J.; Carter, Joshua A.

2015-01-01

Kepler-36 is an extreme planetary system, consisting of two transiting sub-Neptune-size planets that revolve around a sub-giant star with orbital periods of 13.84 and 16.24 days. Mutual gravitational interactions between the two planets perturb the planets' transit times, allowing the planets' masses to be measured. Despite the similarity of their masses and orbital radii, the planets show a stark contrast in their mean densities; the inner planet (Kepler-36 b) is more than eight times as dense as its outer companion planet (Kepler-36 c). We perform a photo-dynamical analysis of the Kepler-36 system based on more than three years of Kepler photometry. With N-body integrations of initial conditions sampled from the photo-dynamical fits, we further refine the properties of the system by ruling out solutions that show large-scale instability within 5 Giga-days. Ultimately, we measure the planets' masses within 4.2% precision, and the planets' radii with 1.8% precision. Kepler-36 b is currently the rocky exoplanet with the most precisely measured mass and radius. Kepler-36 b's mass and radius are consistent with an Earth-like composition, and an iron-enhanced Mercury-like composition is ruled out.

Compositional Constraints on the Best Characterized Rocky Exoplanet, Kepler-36 b

NASA Astrophysics Data System (ADS)

Rogers, Leslie Anne; Deck, Katherine; Lissauer, Jack; Carter, Joshua

2015-08-01

Kepler-36 is an extreme planetary system, consisting of two transiting sub-Neptune-size planets that revolve around a sub-giant star with orbital periods of 13.84 and 16.24 days. Mutual gravitational interactions between the two planets perturb the planets' transit times, allowing the planets' masses to be measured. Despite the similarity of their masses and orbital radii, the planets show a stark contrast in their mean densities; the inner planet (Kepler-36 b) is more than eight times as dense as its outer companion planet (Kepler-36 c). We perform a photo-dynamical analysis of the Kepler-36 system based on more than three years of Kepler photometry. With N-body integrations of initial conditions sampled from the photo-dynamical fits, we further refine the properties of the system by ruling out solutions that show large scale instability within 5 Giga-days. Ultimately, we measure the planets' masses within 4.2% precision, and the planets' radii with 1.8% precision. Kepler-36 b is currently the rocky exoplanet with the most precisely measured mass and radius. Kepler-36 b’s mass and radius are consistent with a Earth-like composition, and an iron-enhanced Mercury-like composition is ruled out.

Compositional Constraints on the Best Characterized Rocky Exoplanet, Kepler-36 b

NASA Astrophysics Data System (ADS)

Rogers, L.; Deck, K.; Lissauer, J. J.; Carter, J.

2014-12-01

Kepler-36 is an extreme planetary system, consisting of two transiting sub-Neptune-size planets that revolve around a sub-giant star with orbital periods of 13.84 and 16.24 days. Mutual gravitational interactions between the two planets perturb the planets' transit times, allowing the planets' masses to be measured. Despite the similarity of their masses and orbital radii, the planets show a stark contrast in their mean densities; the inner planet (Kepler-36 b) is more than eight times as dense as its outer companion planet (Kepler-36 c). We perform a photo-dynamical analysis of the Kepler-36 system based on more than three years of Kepler photometry. With N-body integrations of initial conditions sampled from the photo-dynamical fits, we further refine the properties of the system by ruling out solutions that show large scale instability within 5 Giga-days. Ultimately, we measure the planets' masses within 4.2% precision, and the planets' radii with 1.8% precision. Kepler-36 b is currently the rocky exoplanet with the most precisely measured mass and radius. Kepler-36 b's mass and radius are consistent with a Earth-like composition, and an iron-enhanced Mercury-like composition is ruled out.

Rules for Input to the Library Catalog on Microfiche (A Guide to Librarians at the Eastman Kodak Company).

ERIC Educational Resources Information Center

Freund, Clare E.

The rules for catalog entries and punctuation outlined in this manual were used to prepare a computer-produced union catalog of the holdings of several libraries at the Eastman Kodak Company. The computer sorts digitally, considering first blanks, then punctuation marks, letters, and finally numbers. This results in a filing sequence which differs…

Spitzer, Planck and Kepler Extended by NASA Artist Concept

NASA Image and Video Library

2012-04-05

From left to right, artist concepts of the Spitzer, Planck and Kepler space telescopes. NASA extended Spitzer and Kepler for two additional years; and the U.S. portion of Planck, a European Space Agency mission, for one year.

Forming Circumbinary Planets: N-body Simulations of Kepler-34

NASA Astrophysics Data System (ADS)

Lines, S.; Leinhardt, Z. M.; Paardekooper, S.; Baruteau, C.; Thebault, P.

2014-02-01

Observations of circumbinary planets orbiting very close to the central stars have shown that planet formation may occur in a very hostile environment, where the gravitational pull from the binary should be very strong on the primordial protoplanetary disk. Elevated impact velocities and orbit crossings from eccentricity oscillations are the primary contributors to high energy, potentially destructive collisions that inhibit the growth of aspiring planets. In this work, we conduct high-resolution, inter-particle gravity enabled N-body simulations to investigate the feasibility of planetesimal growth in the Kepler-34 system. We improve upon previous work by including planetesimal disk self-gravity and an extensive collision model to accurately handle inter-planetesimal interactions. We find that super-catastrophic erosion events are the dominant mechanism up to and including the orbital radius of Kepler-34(AB)b, making in situ growth unlikely. It is more plausible that Kepler-34(AB)b migrated from a region beyond 1.5 AU. Based on the conclusions that we have made for Kepler-34, it seems likely that all of the currently known circumbinary planets have also migrated significantly from their formation location with the possible exception of Kepler-47(AB)c.

CITE NLM: Natural-Language Searching in an Online Catalog.

ERIC Educational Resources Information Center

Doszkocs, Tamas E.

1983-01-01

The National Library of Medicine's Current Information Transfer in English public access online catalog offers unique subject search capabilities--natural-language query input, automatic medical subject headings display, closest match search strategy, ranked document output, dynamic end user feedback for search refinement. References, description…

Modeling Kepler Transit Light Curves as False Positives: Rejection of Blend Scenarios for Kepler-9, and Validation of Kepler-9 d, a Super-Earth-Size Planet in a Multiple System

NASA Technical Reports Server (NTRS)

Torres, Guillermo; Fressin, Francois; Batalha, Natalie M.; Borucki, William J.; Brown, Timothy M.; Bryson, Stephen T.; Buchhave, Lars A.; Charbonneau, David; Ciardi, David R.; Dunham, Edward W.;

Kepler Planet Formation

NASA Technical Reports Server (NTRS)

Lissauer, Jack J.

2015-01-01

Kepler has vastly increased our knowledge of planets and planetary systems located close to stars. The new data shows surprising results for planetary abundances, planetary spacings and the distribution of planets on a mass-radius diagram. The implications of these results for theories of planet formation will be discussed.

Activity indicators and stellar parameters of the Kepler targets. An application of the ROTFIT pipeline to LAMOST-Kepler stellar spectra

NASA Astrophysics Data System (ADS)

Frasca, A.; Molenda-Żakowicz, J.; De Cat, P.; Catanzaro, G.; Fu, J. N.; Ren, A. B.; Luo, A. L.; Shi, J. R.; Wu, Y.; Zhang, H. T.

2016-10-01

Aims: A comprehensive and homogeneous determination of stellar parameters for the stars observed by the Kepler space telescope is necessary for statistical studies of their properties. As a result of the large number of stars monitored by Kepler, the largest and more complete databases of stellar parameters published to date are multiband photometric surveys. The LAMOST-Kepler survey, whose spectra are analyzed in the present paper, was the first large spectroscopic project, which started in 2011 and aimed at filling that gap. In this work we present the results of our analysis, which is focused on selecting spectra with emission lines and chromospherically active stars by means of the spectral subtraction of inactive templates. The spectroscopic determination of the atmospheric parameters for a large number of stars is a by-product of our analysis. Methods: We have used a purposely developed version of the code ROTFIT for the determination of the stellar parameters by exploiting a wide and homogeneous collection of real star spectra, namely the Indo US library. We provide a catalog with the atmospheric parameters (Teff, log g, and [Fe/H]), radial velocity (RV), and an estimate of the projected rotation velocity (vsini). For cool stars (Teff≤ 6000 K), we also calculated the Hα and Ca II-IRT fluxes, which are important proxies of chromospheric activity. Results: We have derived the RV and atmospheric parameters for 61 753 spectra of 51 385 stars. The average uncertainties, which we estimate from the stars observed more than once, are about 12 km s-1, 1.3%, 0.05 dex, and 0.06 dex for RV, Teff, log g, and [Fe/H], respectively, although they are larger for the spectra with a very low signal-to-noise ratio. Literature data for a few hundred stars (mainly from high-resolution spectroscopy) were used to peform quality control of our results. The final accuracy of the RV is about 14 km s-1. The accuracy of the Teff, log g, and [Fe/H] measurements is about 3.5%, 0.3 dex

Robo-AO Kepler Asteroseismic Survey. I. Adaptive Optics Imaging of 99 Asteroseismic Kepler Dwarfs and Subgiants

DOE Office of Scientific and Technical Information (OSTI.GOV)

Schonhut-Stasik, Jessica S.; Baranec, Christoph; Huber, Daniel

We used the Robo-AO laser adaptive optics (AOs) system to image 99 main sequence and subgiant stars that have Kepler -detected asteroseismic signals. Robo-AO allows us to resolve blended secondary sources at separations as close as ∼0.″15 that may contribute to the measured Kepler light curves and affect asteroseismic analysis and interpretation. We report eight new secondary sources within 4.″0 of these Kepler asteroseismic stars. We used Subaru and Keck AOs to measure differential infrared photometry for these candidate companion systems. Two of the secondary sources are likely foreground objects, while the remaining six are background sources; however, we cannotmore » exclude the possibility that three of the objects may be physically associated. We measured a range of i ′-band amplitude dilutions for the candidate companion systems from 0.43% to 15.4%. We find that the measured amplitude dilutions are insufficient to explain the previously identified excess scatter in the relationship between asteroseismic oscillation amplitude and the frequency of maximum power.« less

Kepler-424 b: A 'lonely' hot Jupiter that found A companion

DOE Office of Scientific and Technical Information (OSTI.GOV)

Endl, Michael; Caldwell, Douglas A.; Barclay, Thomas

Hot Jupiter systems provide unique observational constraints for migration models in multiple systems and binaries. We report on the discovery of the Kepler-424 (KOI-214) two-planet system, which consists of a transiting hot Jupiter (Kepler-424b) in a 3.31 day orbit accompanied by a more massive outer companion in an eccentric (e = 0.3) 223 day orbit. The outer giant planet, Kepler-424c, is not detected transiting the host star. The masses of both planets and the orbital parameters for the second planet were determined using precise radial velocity (RV) measurements from the Hobby-Eberly Telescope (HET) and its High Resolution Spectrograph (HRS). Inmore » stark contrast to smaller planets, hot Jupiters are predominantly found to be lacking any nearby additional planets; they appear to be {sup l}onely{sup .} This might be a consequence of these systems having a highly dynamical past. The Kepler-424 planetary system has a hot Jupiter in a multiple system, similar to υ Andromedae. We also present our results for Kepler-422 (KOI-22), Kepler-77 (KOI-127), Kepler-43 (KOI-135), and Kepler-423 (KOI-183). These results are based on spectroscopic data collected with the Nordic Optical Telescope (NOT), the Keck 1 telescope, and HET. For all systems, we rule out false positives based on various follow-up observations, confirming the planetary nature of these companions. We performed a comparison with planetary evolutionary models which indicate that these five hot Jupiters have heavy element contents between 20 and 120 M {sub ⊕}.« less

Pantheon of Planets Similar to Earth Artist Concept

NASA Image and Video Library

2015-07-23

A newly discovered exoplanet, Kepler-452b, comes the closest of any found so far to matching our Earth-sun system. This artist's conception of a planetary lineup shows habitable-zone planets with similarities to Earth: from left, Kepler-22b, Kepler-69c, the just announced Kepler-452b, Kepler-62f and Kepler-186f. Last in line is Earth itself. http://photojournal.jpl.nasa.gov/catalog/PIA19830

Kepler-22b -- Comfortably Circling within the Habitable Zone

NASA Image and Video Library

2011-12-05

This diagram compares our own solar system to Kepler-22, a star system containing the first habitable zone planet -- the sweet spot around a star where temperatures are right for water to exist in its liquid form, discovered by NASA Kepler mission.

Take off with NASA's Kepler Mission!: The Search for Other "Earths"

ERIC Educational Resources Information Center

Koch, David; DeVore, Edna K.; Gould, Alan; Harman, Pamela

2009-01-01

Humans have long wondered about life in the universe. Are we alone? Is Earth unique? What is it that makes our planet a habitable one, and are there others like Earth? NASA's Kepler Mission seeks the answers to these questions. Kepler is a space-based, specially designed 0.95 m aperture telescope. Launching in 2009, Kepler is NASA's first mission…

The Kepler Mission and the International Year of Astronomy

NASA Astrophysics Data System (ADS)

Harman, Pamela; DeVore, E.; Gould, A.; Koch, D.

2008-05-01

Johannes Kepler was one of Galileo's contemporaries, publishing New Astronomy defining his first two laws, nearly 400 years ago, in 1609. It is a fitting tribute that the Kepler Mission launches in 2009. Kepler continued his studies of motion and made observations of satellites of Jupiter, and published his third law. We now recognize Kepler's laws as 1. Planets move in elliptical; 2. The planets move such that the line between the Sun and the Planet sweeps out equal areas in equal time no matter where in the orbit; and 3. The square of the period of the orbit of a planet is proportional to the mean distance from the Sun cubed. Kepler's laws were deduced empirically from the motions of the planet Mars in the early 17th century, before Newton deduced the law of gravity and his laws of motion. The Kepler Mission, a NASA Discovery mission, is specifically designed to survey our region of the Milky Way galaxy to detect and characterize hundreds of Earth-size and smaller planets in or near the habitable zone. The habitable zone encompasses the distances from a star where liquid water can exist on a planet's surface. Results from this mission will allow us to place our solar system within the continuum of planetary systems in the Galaxy. The Mission Education and Public Outreach (EPO) Program has developed a Night Sky Network (NSN) outreach kit, Shadows and Silhouettes. This NSN kit is used by amateur astronomers at school and public observing events to illustrate a transit, and explain eclipses.

Hubble Space Telescope Parallel Observations Supporting the Kepler Mission

NASA Astrophysics Data System (ADS)

Caldwell, J.; Borucki, W.

1999-09-01

Kepler will detect Earth-like planets by monitoring 100,000 stars over four years for planetary transits. The required photometric precision is one part in 100.000. It is expected that if such ``Earths" are common, about 200 will be detected. In order to achieve the necessary precision, Kepler will be intentionally unfocussed, spreading the light of a single star over an area of 25 pixels. This will minimize the effect of space-craft jitter on photon counting. However, it will also allow the possibility of confusion with background objects which may be in the line of sight to a Kepler target. The greatest concern is that there may be a distant eclipsing binary star which could introduce a photometric signature that is similar to a planetary transit. For the brightest stars in Kepler's intended magnitude range, which is 9 to 14 mv, this will not be serious, because the profiles are different: eclipses have a ``V" shape, transits are flat-bottomed, and Kepler will differentiate the two. However, in this magnitude range, the number of stars per magnitude doubles at each fainter magnitude. More than half of Kepler's discoveries will be in the magnitude which is the faintest in which the precision of the photometry will be able to reveal a transit. That is, most of the discoveries will be low signal to noise events, in which the reality of a small decrease in the light from the region of the target star is certain, but the details of the decrease are not. Hubble Space Telescope images indicate there will be, on average, 0.5 background objects in the magnitude range that could be a problem for Kepler in the 25 pixel blur region of Kepler's optics. Approximately half of the stars will be binaries. The probability that a binary will be eclipsing is the same as that a planetary orbit will be transitting. In order to reduce the chance of a misidentification, various strategies can be used. Rather than integrating the signal over the 25 pixels and returning only the sum, the

KEPLER PLANETS: A TALE OF EVAPORATION

DOE Office of Scientific and Technical Information (OSTI.GOV)

Owen, James E.; Wu, Yanqin, E-mail: jowen@cita.utoronto.ca, E-mail: wu@astro.utoronto.ca

2013-10-01

Inspired by the Kepler mission's planet discoveries, we consider the thermal contraction of planets close to their parent star, under the influence of evaporation. The mass-loss rates are based on hydrodynamic models of evaporation that include both X-ray and EUV irradiation. We find that only low mass planets with hydrogen envelopes are significantly affected by evaporation, with evaporation being able to remove massive hydrogen envelopes inward of ∼0.1 AU for Neptune-mass objects, while evaporation is negligible for Jupiter-mass objects. Moreover, most of the evaporation occurs in the first 100 Myr of stars' lives when they are more chromospherically active. Wemore » construct a theoretical population of planets with varying core masses, envelope masses, orbital separations, and stellar spectral types, and compare this population with the sizes and densities measured for low-mass planets, both in the Kepler mission and from radial velocity surveys. This exercise leads us to conclude that evaporation is the driving force of evolution for close-in Kepler planets. In fact, some 50% of the Kepler planet candidates may have been significantly eroded. Evaporation explains two striking correlations observed in these objects: a lack of large radius/low density planets close to the stars and a possible bimodal distribution in planet sizes with a deficit of planets around 2 R{sub ⊕}. Planets that have experienced high X-ray exposures are generally smaller than this size, and those with lower X-ray exposures are typically larger. A bimodal planet size distribution is naturally predicted by the evaporation model, where, depending on their X-ray exposure, close-in planets can either hold on to hydrogen envelopes ∼0.5%-1% in mass or be stripped entirely. To quantitatively reproduce the observed features, we argue that not only do low-mass Kepler planets need to be made of rocky cores surrounded with hydrogen envelopes, but few of them should have initial masses above

Absolute densities in exoplanetary systems. Photodynamical modelling of Kepler-138.

NASA Astrophysics Data System (ADS)

Almenara, J. M.; Díaz, R. F.; Dorn, C.; Bonfils, X.; Udry, S.

2018-04-01

In favourable conditions, the density of transiting planets in multiple systems can be determined from photometry data alone. Dynamical information can be extracted from light curves, providing modelling is done self-consistently, i.e. using a photodynamical model, which simulates the individual photometric observations instead of the more generally used transit times. We apply this methodology to the Kepler-138 planetary system. The derived planetary bulk densities are a factor of two more precise than previous determinations, and we find a discrepancy in the stellar bulk density with respect to a previous study. This leads, in turn, to a discrepancy in the determination of masses and radii of the star and the planets. In particular, we find that interior planet, Kepler-138 b, has a size in between Mars and the Earth. Given our mass and density estimates, we characterize the planetary interiors using a generalized Bayesian inference model. This model allows us to quantify for interior degeneracy and calculate confidence regions of interior parameters such as thicknesses of the core, the mantle, and ocean and gas layers. We find that Kepler-138 b and Kepler-138 d have significantly thick volatile layers, and that the gas layer of Kepler-138 b is likely enriched. On the other hand, Kepler-138 c can be purely rocky.

Absolute densities in exoplanetary systems: photodynamical modelling of Kepler-138

NASA Astrophysics Data System (ADS)

Almenara, J. M.; Díaz, R. F.; Dorn, C.; Bonfils, X.; Udry, S.

2018-07-01

In favourable conditions, the density of transiting planets in multiple systems can be determined from photometry data alone. Dynamical information can be extracted from light curves, providing modelling is done self-consistently, i.e. using a photodynamical model, which simulates the individual photometric observations instead of the more generally used transit times. We apply this methodology to the Kepler-138 planetary system. The derived planetary bulk densities are a factor of 2 more precise than previous determinations, and we find a discrepancy in the stellar bulk density with respect to a previous study. This leads, in turn, to a discrepancy in the determination of masses and radii of the star and the planets. In particular, we find that interior planet, Kepler-138b, has a size in between Mars and the Earth. Given our mass and density estimates, we characterize the planetary interiors using a generalized Bayesian inference model. This model allows us to quantify for interior degeneracy and calculate confidence regions of interior parameters such as thicknesses of the core, the mantle, and ocean and gas layers. We find that Kepler-138b and Kepler-138 d have significantly thick volatile layers and that the gas layer of Kepler-138b is likely enriched. On the other hand, Kepler-138c can be purely rocky.

KEPLER OBSERVATIONS OF THE SEYFERT 1 GALAXY II ZW 229.015

DOE Office of Scientific and Technical Information (OSTI.GOV)

Carini, M. T.; Ryle, Wesley T., E-mail: mike.carini@wku.edu

2012-04-10

The Seyfert 1 galaxy II ZW 229.015 has been observed with the Kepler spacecraft since quarter 4 of Kepler science operations. The results of the quarters 4-7 (1 year) Kepler observations are presented in this paper. We find the source to be highly variable on multiple timescales, with discrete variations occurring on timescales as short as tens of hours with amplitudes as small as 0.5%. Such small amplitude, rapid variability has never before been detected in active galactic nuclei. The presence of a strong galaxy component dilutes the variability determined from the photometric aperture used in the standard Kepler PDCmore » analysis. Using the tools provided by the Kepler Guest Observer Office and simultaneous V-band photometry found in the literature, we determine an optimal customized aperture for photometry of this source with Kepler. The results of a PSRESP analysis reveal tentative evidence of a characteristic variability timescale in the power spectrum. Using this timescale, we estimate the mass of the central supermassive black hole and this estimate is consistent with the virial mass estimate from reverberation mapping studies.« less

The U(1)-Kepler Problems

NASA Astrophysics Data System (ADS)

Meng, Guowu

2010-12-01

Let n ⩾ 2 be a positive integer. To each irreducible representation σ of U(1), a U(1)-Kepler problem in dimension (2n - 1) is constructed and analyzed. This system is superintegrable and when n = 2 it is equivalent to a MICZ-Kepler problem. The dynamical symmetry group of this system is widetildeU(n, n), and the Hilbert space of bound states {{H}}(σ ) is the unitary highest weight representation of widetildeU(n, n) with the minimal positive Gelfand-Kirillov dimension. Furthermore, it is shown that the correspondence between σ ^* (the dual of σ) and {H}(σ ) is the theta-correspondence for dual pair (U(1), U(n,n))subseteq Sp_{4n}({R}).

A Search for Lost Planets in the Kepler Multi-planet Systems and the Discovery of the Long-period, Neptune-sized Exoplanet Kepler-150 f

NASA Astrophysics Data System (ADS)

Schmitt, Joseph R.; Jenkins, Jon M.; Fischer, Debra A.

2017-04-01

The vast majority of the 4700 confirmed planets (CPs) and planet candidates discovered by the Kepler mission were first found by the Kepler pipeline. In the pipeline, after a transit signal is found, all data points associated with those transits are removed, creating a “Swiss cheese”-like light curve full of holes, which is then used for subsequent transit searches. These holes could render an additional planet undetectable (or “lost”). We examine a sample of 114 stars with 3+ CPs to evaluate the effect of this “Swiss cheesing.” A simulation determines that the probability that a transiting planet is lost due to the transit masking is low, but non-negligible, reaching a plateau at ˜3.3% lost in the period range of P = 400-500 days. We then model all planet transits and subtract out the transit signals for each star, restoring the in-transit data points, and use the Kepler pipeline to search the transit-subtracted (I.e., transit-cleaned) light curves. However, the pipeline did not discover any credible new transit signals. This demonstrates the validity and robustness of the Kepler pipeline’s choice to use transit masking over transit subtraction. However, a follow-up visual search through all the transit-subtracted data, which allows for easier visual identification of new transits, revealed the existence of a new, Neptune-sized exoplanet (Kepler-150 f) and a potential single transit of a likely false positive (FP) (Kepler-208). Kepler-150 f (P = 637.2 days, {R}{{P}}={3.64}-0.39+0.52 R⊕) is confirmed with >99.998% confidence using a combination of the planet multiplicity argument, an FP probability analysis, and a transit duration analysis.

Kepler AutoRegressive Planet Search (KARPS)

NASA Astrophysics Data System (ADS)

Caceres, Gabriel

2018-01-01

One of the main obstacles in detecting faint planetary transits is the intrinsic stellar variability of the host star. The Kepler AutoRegressive Planet Search (KARPS) project implements statistical methodology associated with autoregressive processes (in particular, ARIMA and ARFIMA) to model stellar lightcurves in order to improve exoplanet transit detection. We also develop a novel Transit Comb Filter (TCF) applied to the AR residuals which provides a periodogram analogous to the standard Box-fitting Least Squares (BLS) periodogram. We train a random forest classifier on known Kepler Objects of Interest (KOIs) using select features from different stages of this analysis, and then use ROC curves to define and calibrate the criteria to recover the KOI planet candidates with high fidelity. These statistical methods are detailed in a contributed poster (Feigelson et al., this meeting).These procedures are applied to the full DR25 dataset of NASA’s Kepler mission. Using the classification criteria, a vast majority of known KOIs are recovered and dozens of new KARPS Candidate Planets (KCPs) discovered, including ultra-short period exoplanets. The KCPs will be briefly presented and discussed.

LANDSAT 2 world standard catalog, 1-31 December 1978

NASA Technical Reports Server (NTRS)

1978-01-01

The World Standard Catalog lists imagery acquired by LANDSAT 2 which was processed and input to the data files during the referenced period. Information on cloud cover and image quality is given for each scene. The microfilm roll and frame on which the scene may be found is presented.

LANDSAT 3 world standard catalog, 1-31 December 1978

NASA Technical Reports Server (NTRS)

1978-01-01

The World Standard Catalog lists imagery acquired by LANDSAT 3 which was processed and input to the data files during the referenced period. Information on cloud cover and image quality is given for each scene. The microfilm roll and frame on which the scene may be found is given.

Kadenza: Kepler/K2 Raw Cadence Data Reader

NASA Astrophysics Data System (ADS)

Barentsen, Geert; Cardoso, José Vinícius de Miranda

2018-03-01

Kadenza enables time-critical data analyses to be carried out using NASA's Kepler Space Telescope. It enables users to convert Kepler's raw data files into user-friendly Target Pixel Files upon downlink from the spacecraft. The primary motivation for this tool is to enable the microlensing, supernova, and exoplanet communities to create quicklook lightcurves for transient events which require rapid follow-up.

Management and systems engineering of the Kepler mission

NASA Astrophysics Data System (ADS)

Fanson, James; Livesay, Leslie; Frerking, Margaret; Cooke, Brian

2010-07-01

Kepler is the National Aeronautics and Space Administration's (NASA's) first mission capable of detecting Earth-size planets orbiting in the habitable zones around stars other than the sun. Selected for implementation in 2001 and launched in 2009, Kepler seeks to determine whether Earth-like planets are common or rare in the galaxy. The investigation requires a large, space-based photometer capable of simultaneously measuring the brightnesses of 100,000 stars at partper- million level of precision. This paper traces the development of the mission from the perspective of project management and systems engineering and describes various methodologies and tools that were found to be effective. The experience of the Kepler development is used to illuminate lessons that can be applied to future missions.

Management and Systems Engineering of the Kepler Mission

NASA Technical Reports Server (NTRS)

Fanson, James; Livesay, Leslie; Frerking, Margaret; Cooke, Brian

2010-01-01

Kepler is the National Aeronautics and Space Administration's (NASA's) first mission capable of detecting Earth-size planets orbiting in the habitable zones around stars other than the sun. Selected for implementation in 2001 and launched in 2009, Kepler seeks to determine whether Earth-like planets are common or rare in the galaxy. The investigation requires a large, space-based photometer capable of simultaneously measuring the brightnesses of 100,000 stars at part-per-million level of precision. This paper traces the development of the mission from the perspective of project management and systems engineering and describes various methodologies and tools that were found to be effective. The experience of the Kepler development is used to illuminate lessons that can be applied to future missions.

A Mathematical Elucidation of the Bases of Kepler's Laws

NASA Astrophysics Data System (ADS)

Davis, A. E. L.

Throughout this analysis I have followed the Keplerian usage, based essentially on considerations of geometrical coherence, by contrast with the Newtonian usage. The discoveries of Law I and Law II in Astronomia Nova have been examined separately, each in three stages. By stipulating an observation -controlled level of accuracy I have proved that it was at the quadrant that Kepler distinguished the mediate (Sun -focused) ellipse from the eccentric circle and from the small-grade curves he had successively proposed. To specify this correct orbit Kepler expressed both the radius vector (effectively equivalent to libration) and the corresponding time (designated by mean anomaly, then reformulated as area) in terms of eccentric anomaly as common independent variable. Subsequently I demonstrate that, by the use of his characteristic Euclidean construction-method, and within this geometrical frame of reference, Kepler could have justified on other orbit. The proofs of Law I and Law II in Epitome have again been treated separately, so enabling me to confirm the soundness of Kepler's resolution of planetary motion into perpendicular radial and transverse components, precisely in accordance with modern standards. The independence of these motions necessitated just two distinct faculties of the Sun to produce them: the magnetic effect activating radially, and the driving/whirling force of the Sun acting transversely; gravity was thereby altogether excluded from the synthesis. Hence it is Kepler's account of the physical causes alone which is quite wrong, owing to his defective (Aristotelian) concept of force. Moreover, by stipulation of a level of analytical exactitude, I have concluded that Kepler's methods of summation and implicit quotient-formation were mathematically valid, leading to results tantamount to those obtained nowadays by integration and differentiation. As a bonus, I have found relevant information, concerning individual plants, in Harmonice Mundi Book V

Kepler Observations of Transiting Hot Compact Objects

DTIC Science & Technology

2010-04-20

1998) and a sample of extremely light WDs are shown with black o’s. The open circle near KOI-81b is the millisecond pulsar companion discovered by...Follow-up observations are planned as well as contin- ued with the Kepler instrument to help unravel their nature. Funding for this Discovery mission is... discoveries possible. Facilities: Kepler REFERENCES Bassa, C. G., van Kerkwijk, M. H., Koester, D., & Verbunt, F. 2006, A&A, 456, 295 Beech, M. 1989, Ap&SS

Transiting Planets from Kepler, K2 & TESS

NASA Technical Reports Server (NTRS)

Lissauer, Jack

2018-01-01

NASA's Kepler spacecraft, launched in 2009, has been a resounding success. More than 4000 planet candidates have been identified using data from Kepler primary mission, which ended in 2013, and greater than 2000 of these candidates have been verified as bona fide exoplanets. After the loss of two reaction wheels ended the primary mission, the Kepler spacecraft was repurposed in 2014 to observe many fields on the sky for short periods. This new mission, dubbed K2, has led to the discovery of greater than 600 planet candidates, approximately 200 of which have been verified to date; most of these exoplanets are closer to us than the majority of exoplanets discovered by the primary Kepler mission. TESS, launching in 2018, will survey most of the sky for exoplanets, with emphasis on those orbiting nearby and/or bright host stars, making these planets especially well-suited for follow-up observations with other observatories to characterize atmospheric compositions and other properties. More than one-third of the planet candidates found by NASA's are associated with target stars that have more than one planet candidate, and such 'multis' account for the majority of candidates that have been verified as true planets. The large number of multis tells us that flat multiplanet systems like our Solar System are common. Virtually all of the candidate planetary systems are stable, as tested by numerical integrations that assume a physically motivated mass-radius relationship. Statistical studies performed on these candidate systems reveal a great deal about the architecture of planetary systems, including the typical spacing of orbits and flatness. The characteristics of several of the most interesting confirmed Kepler & K2 multi-planet systems will also be discussed.

Kepler Science Operations Center Pipeline Framework

NASA Technical Reports Server (NTRS)

Klaus, Todd C.; McCauliff, Sean; Cote, Miles T.; Girouard, Forrest R.; Wohler, Bill; Allen, Christopher; Middour, Christopher; Caldwell, Douglas A.; Jenkins, Jon M.

2010-01-01

The Kepler mission is designed to continuously monitor up to 170,000 stars at a 30 minute cadence for 3.5 years searching for Earth-size planets. The data are processed at the Science Operations Center (SOC) at NASA Ames Research Center. Because of the large volume of data and the memory and CPU-intensive nature of the analysis, significant computing hardware is required. We have developed generic pipeline framework software that is used to distribute and synchronize the processing across a cluster of CPUs and to manage the resulting products. The framework is written in Java and is therefore platform-independent, and scales from a single, standalone workstation (for development and research on small data sets) to a full cluster of homogeneous or heterogeneous hardware with minimal configuration changes. A plug-in architecture provides customized control of the unit of work without the need to modify the framework itself. Distributed transaction services provide for atomic storage of pipeline products for a unit of work across a relational database and the custom Kepler DB. Generic parameter management and data accountability services are provided to record the parameter values, software versions, and other meta-data used for each pipeline execution. A graphical console allows for the configuration, execution, and monitoring of pipelines. An alert and metrics subsystem is used to monitor the health and performance of the pipeline. The framework was developed for the Kepler project based on Kepler requirements, but the framework itself is generic and could be used for a variety of applications where these features are needed.

LANDSAT 1 cumulative US standard catalog, 1976/1977

NASA Technical Reports Server (NTRS)

1977-01-01

The LANDSAT 1 U.S. Cumulative Catalog lists U.S. imagery acquired by LANDSAT 1 which has been processed and input to the data files during the referenced year. Data, such as data acquired, cloud cover and image quality are given for each scene. The microfilm roll and frame on which the scene may be found are also given.

Kepler-424 b: A "Lonely" Hot Jupiter that Found a Companion

NASA Astrophysics Data System (ADS)

Endl, Michael; Caldwell, Douglas A.; Barclay, Thomas; Huber, Daniel; Isaacson, Howard; Buchhave, Lars A.; Brugamyer, Erik; Robertson, Paul; Cochran, William D.; MacQueen, Phillip J.; Havel, Mathieu; Lucas, Phillip; Howell, Steve B.; Fischer, Debra; Quintana, Elisa; Ciardi, David R.

2014-11-01

Hot Jupiter systems provide unique observational constraints for migration models in multiple systems and binaries. We report on the discovery of the Kepler-424 (KOI-214) two-planet system, which consists of a transiting hot Jupiter (Kepler-424b) in a 3.31 day orbit accompanied by a more massive outer companion in an eccentric (e = 0.3) 223 day orbit. The outer giant planet, Kepler-424c, is not detected transiting the host star. The masses of both planets and the orbital parameters for the second planet were determined using precise radial velocity (RV) measurements from the Hobby-Eberly Telescope (HET) and its High Resolution Spectrograph (HRS). In stark contrast to smaller planets, hot Jupiters are predominantly found to be lacking any nearby additional planets; they appear to be "lonely". This might be a consequence of these systems having a highly dynamical past. The Kepler-424 planetary system has a hot Jupiter in a multiple system, similar to \\upsilon Andromedae. We also present our results for Kepler-422 (KOI-22), Kepler-77 (KOI-127), Kepler-43 (KOI-135), and Kepler-423 (KOI-183). These results are based on spectroscopic data collected with the Nordic Optical Telescope (NOT), the Keck 1 telescope, and HET. For all systems, we rule out false positives based on various follow-up observations, confirming the planetary nature of these companions. We performed a comparison with planetary evolutionary models which indicate that these five hot Jupiters have heavy element contents between 20 and 120 M ⊕. Based on observations obtained with the Hobby-Eberly Telescope, which is a joint project of the University of Texas at Austin, the Pennsylvania State University, Stanford University, Ludwig-Maximilians-Universität München, and Georg-August-Universität Göttingen.

Asteroseismology of 16,000 Kepler Red Giants: Global Oscillation Parameters, Masses, and Radii

NASA Astrophysics Data System (ADS)

Yu, Jie; Huber, Daniel; Bedding, Timothy R.; Stello, Dennis; Hon, Marc; Murphy, Simon J.; Khanna, Shourya

2018-06-01

The Kepler mission has provided exquisite data to perform an ensemble asteroseismic analysis on evolved stars. In this work we systematically characterize solar-like oscillations and granulation for 16,094 oscillating red giants, using end-of-mission long-cadence data. We produced a homogeneous catalog of the frequency of maximum power (typical uncertainty {σ }{ν \\max }=1.6 % ), the mean large frequency separation ({σ }{{Δ }ν }=0.6 % ), oscillation amplitude ({σ }{{A}}=4.7 % ), granulation power ({σ }gran}=8.6 % ), power excess width ({σ }width}=8.8 % ), seismically derived stellar mass ({σ }{{M}}=7.8 % ), radius ({σ }{{R}}=2.9 % ), and thus surface gravity ({σ }logg}=0.01 dex). Thanks to the large red giant sample, we confirm that red-giant-branch (RGB) and helium-core-burning (HeB) stars collectively differ in the distribution of oscillation amplitude, granulation power, and width of power excess, which is mainly due to the mass difference. The distribution of oscillation amplitudes shows an extremely sharp upper edge at fixed {ν }\\max , which might hold clues for understanding the excitation and damping mechanisms of the oscillation modes. We find that both oscillation amplitude and granulation power depend on metallicity, causing a spread of 15% in oscillation amplitudes and a spread of 25% in granulation power from [Fe/H] = ‑0.7 to 0.5 dex. Our asteroseismic stellar properties can be used as reliable distance indicators and age proxies for mapping and dating galactic stellar populations observed by Kepler. They will also provide an excellent opportunity to test asteroseismology using Gaia parallaxes, and lift degeneracies in deriving atmospheric parameters in large spectroscopic surveys such as APOGEE and LAMOST.

Harmonical cosmology: Johannes Kepler and Athanasius Kircher. (German Title: Harmonikale Kosmologie: Johannes Kepler und Athanasius Kircher)

NASA Astrophysics Data System (ADS)

Rebohm, Simon

2011-08-01

The connection between musical theory and astronomy is an aspect of Pythagorean cosmology, which still played a role in the 17th century, and was advanced at that time in very different ways: while Johannes Kepler conceives a proper geometrical system of harmonics and tries to connect it with accurate astronomical data, Athanasius Kircher, harshly criticising Kepler's ideas, sets a qualitative system against it, which is based on analogies. The reason for this discrepancy is not only found in the basically different systems of harmonics of both researchers, but also in the different positions that were taken by both within the controversy about the heliocentric system of the world.

LANDSAT 2 world standard catalog, 1-31 January 1979

NASA Technical Reports Server (NTRS)

1979-01-01

The World Standard Catalog lists imagery acquired by LANDSAT 2 which are processed and input to the data files during the referenced period. Information such as cloud cover and image quality is given for each scene. The microfilm roll and frame on which the scene may be found is also given.

LANDSAT 2 world standard catalog, 1-30 November 1978

NASA Technical Reports Server (NTRS)

1978-01-01

The World Standard Catalog lists imagery acquired by LANDSAT 2 which was processed and input to the data files during the referenced period. Information such as cloud cover and image quality is given for each scene. The microfilm roll and frame on which the scene may be found is also given.

LANDSAT 2 world standard catalog, 1-31 October 1978

NASA Technical Reports Server (NTRS)

1978-01-01

The World Standard Catalog lists imagery acquired by LANDSAT 2 which was processed and input to the data files during the referenced period. Information such as cloud cover and image quality is given for each scene. The microfilms roll and frame on which the scene may be found is also given.

Kepler Mission Website: Portal to the International Year of Astronomy

NASA Astrophysics Data System (ADS)

Harman, Pamela; DeVore, E.; Gould, A.; Koch, D.

2008-05-01

The 400th anniversary of Galileo's telescope is an opportunity to turn the public's eyes skyward and to the universe beyond the solar system. The Kepler Mission, launching in 2009, the International Year of Astronomy (IYA) will is specifically designed to survey our region of the Milky Way galaxy to detect and characterize hundreds of Earth-size and smaller planets in or near the habitable zone, using the transit method of detection. The habitable zone encompasses the distances from a star where liquid water can exist on a planet's surface. Results from this mission will allow us to place our solar system within the continuum of planetary systems in the Galaxy. The Kepler Mission is a NASA Discovery Program Mission. The Kepler Mission website http://www.kepler.arc.nasa.gov/ offers classroom activity lesson plans Detecting Planet Transits, The Human Orrery, and Morning Star and Evening Star. The activities are suitable for the informal science education realm. The spacecraft paper model and LEGO model orrerey can be used in the classroom by teachers or at home by families. The mission simulation and animation, as well as lessons and models highlight the science concepts critical to employing the transit method of detection, Kepler's Laws. The Send Your Name to Space on Kepler Spacecraft provides a certificate of participation for all individuals that submit there name to be listed on a DVD placed on the spacecraft. This poster will provide details on each of the items described.

BEER ANALYSIS OF KEPLER AND CoRoT LIGHT CURVES. II. EVIDENCE FOR SUPERROTATION IN THE PHASE CURVES OF THREE KEPLER HOT JUPITERS

DOE Office of Scientific and Technical Information (OSTI.GOV)

Faigler, S.; Mazeh, T.

We analyzed the Kepler light curves of four transiting hot Jupiter systems—KOI-13, HAT-P-7, TrES-2, and Kepler-76, which show BEaming, Ellipsoidal, and Reflection (BEER) phase modulations. The mass of the four planets can be estimated from either the beaming or the ellipsoidal amplitude, given the mass and radius of their parent stars. For KOI-13, HAT-P-7, and Kepler-76 we find that the beaming-based planetary mass estimate is larger than the mass estimated from the ellipsoidal amplitude, consistent with previous studies. This apparent discrepancy may be explained by equatorial superrotation of the planet atmosphere, which induces an angle shift of the planet reflection/emissionmore » phase modulation, as was suggested for Kepler-76 in the first paper of this series. We propose a modified BEER model that supports superrotation, assuming either a Lambertian or geometric reflection/emission phase function, and provides a photometry-consistent estimate of the planetary mass. Our analysis shows that for Kepler-76 and HAT-P-7, the Lambertian superrotation BEER model is highly preferable over an unshifted null model, while for KOI-13 it is preferable only at a 1.4σ level. For TrES-2 we do not find such preference. For all four systems the Lambertian superrotation model mass estimates are in excellent agreement with the planetary masses derived from, or constrained by, radial velocity measurements. This makes the Lambertian superrotation BEER model a viable tool for estimating the masses of hot Jupiters from photometry alone. We conclude that hot Jupiter superrotation may be a common phenomenon that can be detected in the visual light curves of Kepler.« less

NASA's Kepler Mission: Lessons Learned from Teacher Professional Development Workshops

NASA Astrophysics Data System (ADS)

Devore, E.; Harman, P.; Koch, D.; Gould, A.

2010-08-01

NASA's Kepler Mission conducts teacher professional development workshops on the search for exoplanets in the habitable zone of Sun-like stars. Each is supported by a Kepler team scientist, two Education and Public Outreach staff and local hosts. Activities combine a science content lecture and discussion, making models, kinesthetic activities, and interpretation of transit data. The emphasis is on inquiry-based instruction and supports science education standards in grades 7-12. Participants' kit includes an orrery, optical sensor and software to demonstrate transit detection. The workshop plan, teaching strategies, and lessons learned from evaluation will be discussed. Future events are planned. The Kepler Mission teacher professional development workshops are designed using the best practices and principals from the National Science Education Standards and similar documents. Sharing the outcome of our plans, strategies and formative evaluation results can be of use to other Education and Public Outreach practitioners who plan similar events. In sharing our experiences, we hope to assist others, and to learn from them as well. Supported by NASA Grants to the E. DeVore, SETI Institute NAG2-6066 Kepler Education and Public Outreach and NNX08BA74G, IYA Kepler Mission Pre-launch Workshops.

Identifying Exoplanets with Deep Learning: A Five-planet Resonant Chain around Kepler-80 and an Eighth Planet around Kepler-90

NASA Astrophysics Data System (ADS)

Shallue, Christopher J.; Vanderburg, Andrew

2018-02-01

NASA’s Kepler Space Telescope was designed to determine the frequency of Earth-sized planets orbiting Sun-like stars, but these planets are on the very edge of the mission’s detection sensitivity. Accurately determining the occurrence rate of these planets will require automatically and accurately assessing the likelihood that individual candidates are indeed planets, even at low signal-to-noise ratios. We present a method for classifying potential planet signals using deep learning, a class of machine learning algorithms that have recently become state-of-the-art in a wide variety of tasks. We train a deep convolutional neural network to predict whether a given signal is a transiting exoplanet or a false positive caused by astrophysical or instrumental phenomena. Our model is highly effective at ranking individual candidates by the likelihood that they are indeed planets: 98.8% of the time it ranks plausible planet signals higher than false-positive signals in our test set. We apply our model to a new set of candidate signals that we identified in a search of known Kepler multi-planet systems. We statistically validate two new planets that are identified with high confidence by our model. One of these planets is part of a five-planet resonant chain around Kepler-80, with an orbital period closely matching the prediction by three-body Laplace relations. The other planet orbits Kepler-90, a star that was previously known to host seven transiting planets. Our discovery of an eighth planet brings Kepler-90 into a tie with our Sun as the star known to host the most planets.

Kepler Ground-Based Photometry Proof-of-Concept

NASA Technical Reports Server (NTRS)

Brown, Timothy M.; Latham, D.; Howell, S.; Everett, M.

2004-01-01

We report on our efforts to evaluate the feasibility of using the 4-Shooter CCD camera on the 48-inch reflector at the Whipple Observatory to carry out a multi-band photometric survey of the Kepler target region. We also include recommendations for future work. We were assigned 36 nights with the &hooter during 2003 for this feasibility study. Most of the time during the first two dozen nights was dedicated to the development of procedures, test exposures, and a reconnaissance across the Kepler field. The final 12 nights in September and October 2003 were used for "production" observing in the middle of the Kepler field using the full complement of seven filters (SDSS u, g, r, i, z, plus our special Gred and D51 intermediate-band filters). Nine of these 12 nights were clear and photometric, and production observations were obtained at 109 pointings, corresponding to 14.6 square degrees.

The Dynamics of Tightly-packed Planetary Systems in the Presence of an Outer Planet: Case Studies Using Kepler-11 and Kepler-90

NASA Astrophysics Data System (ADS)

Granados Contreras, A. P.; Boley, A. C.

2018-03-01

We explore the effects of an undetected outer giant planet on the dynamics, observability, and stability of Systems with Tightly-packed Inner Planets (STIPs). We use direct numerical simulations along with secular theory and synthetic secular frequency spectra to analyze how analogues of Kepler-11 and Kepler-90 behave in the presence of a nearly co-planar, Jupiter-like outer perturber with semimajor axes between 1 and 5.2 au. Most locations of the outer perturber do not affect the evolution of the inner planetary systems, apart from altering precession frequencies. However, there are locations at which an outer planet causes system instability due to, in part, secular eccentricity resonances. In Kepler-90, there is a range of orbital distances for which the outer perturber drives planets b and c, through secular interactions, onto orbits with inclinations that are ∼16° away from the rest of the planets. Kepler-90 is stable in this configuration. Such secular resonances can thus affect the observed multiplicity of transiting systems. We also compare the synthetic apsidal and nodal precession frequencies with the secular theory and find some misalignment between principal frequencies, indicative of strong interactions between the planets (consistent with the system showing TTVs). First-order libration angles are calculated to identify MMRs in the systems, for which two near-MMRs are shown in Kepler-90, with a 5:4 between b and c, as well as a 3:2 between g and h.

One Hundred Thousand Eyes: Analysis of Kepler Archival Data

NASA Astrophysics Data System (ADS)

Fischer, Debra

We are using a powerful resource, more than 100,000 eyes of users on the successful Planet Hunters Web project, who will identify the best follow-up science targets for this ADAP proposal among the Kepler public archive light curves. Planet Hunters is a Citizen Science program with a user base of more than 50,000 individuals who have already contributed the 24/7 cumulative equivalent of 200 human years assessing Kepler data. They independently identified most of the Kepler candidates with radii greater than 3-4 REARTH and they detected ten transiting planet candidates that were missed by the Kepler pipeline algorithms, including two circumbinary transiting planet candidates. These detections have provided important feedback for the Kepler algorithms about possible leaks where candidates might be lost. Our scientific follow up program will use Planet Hunter classifications of archival data from the Kepler Mission to: "Detect and model new transiting planets: for radii greater than 3 4 REARTH and orbital periods longer than one year, the Planet Hunters should be quite competitive with automated pipelines that require at least 3 transits for a detection and fill in the parameter space for Neptune-size planets over a wide range of orbital periods. For stars where a single transit can be modeled as a long period planet, we will establish a watch list for future transits. We will carry out checks for false positives (pixel centroiding analysis, AO observations, Doppler measurements where appropriate). "Analyze the completeness statistics for Kepler transits and independently determine a corrected planet occurrence rate as a function of planet radius and orbital period. This will be done by injecting synthetic transits into real Kepler light curves and calculating the efficiency with which the transits are detected by Planet Hunters. "Model the full spectroscopic and photometric orbital solutions for a set of ~60 detached eclipsing binary systems with low mass K and M

Kepler and the Star of Bethlehem

NASA Astrophysics Data System (ADS)

Hansen, Rahlf

Johannes Kepler (1571-1630) was a famous astronomer. But like other astronomers he had a problem to find work that would guarantee a regular income. So he was lucky to get work as "Styrian landscape mathematician" in Graz. One of his tasks was to write an annual calendar of weather forecasts and policital developments on the basis of astrological facts. He correctly predicted a conflict with the Osmanic Empire, although it is not clear whether the stars or the newspapers were the cause for that. Both his horoscope for Wallenstein and his book "Warnung an die Gegner der Astrologie" are well known. Kepler believed in some aspects of astrology, the influence of the planets for example. He deduced this front his ideas about physics. He neglected other aspects of astrology. e.g. the significance of the zodiac. In 1604 Kepler observed a new star and believed in a connection to a special and very rare planetary conjunction. After a Jupiter-Saturn-conjunction Jupiter met Mars. Kepler speculated that the star of Bethlehem might be a new star which was generated after a similar conjunction and recalculated it for 6/7 BC. Nowadays examples of both astronomical (and astrological) interpretations of the star of Bethlehem exist. The best known is the three time conjunction of 6/7 BC. But the interpretation of Martin (1980) for 213 BC seems equally excellent. Vardaman (1989) takes the Halley comet of 12 BC to be the star of Bethlehem. Other speculations arise from two Novae in the years 5 and 4 BC, tabulated in sources from the Far East. But historians tell us that there is no need fo a real star. The text in Matthew, book 2 is a legend. What is important in regard to the understanding of the star of Bethlehem is the "sidus Julium" the comet which could be seen in the sky during Caesar's funeral and the match of the King of Armenia Tiridates to Nero in Rome during. There was no real star over Bethlehem. All we have are interesting speculations, like those by Kepler.

Modelling linewidths of Kepler red giants in NGC 6819

NASA Astrophysics Data System (ADS)

Aarslev, Magnus J.; Houdek, Günter; Handberg, Rasmus; Christensen-Dalsgaard, Jørgen

2018-04-01

We present a comparison between theoretical, frequency-dependent, damping rates and linewidths of radial-mode oscillations in red-giant stars located in the open cluster NGC 6819. The calculations adopt a time-dependent non-local convection model, with the turbulent pressure profile being calibrated to results of 3D hydrodynamical simulations of stellar atmospheres. The linewidths are obtained from extensive peakbagging of Kepler lightcurves. These observational results are of unprecedented quality owing to the long continuous observations by Kepler. The uniqueness of the Kepler mission also means that, for asteroseismic properties, this is the best data that will be available for a long time to come. We therefore take great care in modelling nine RGB stars in NGC 6819 using information from 3D simulations to obtain realistic temperature stratifications and calibrated turbulent pressure profiles. Our modelled damping rates reproduce well the Kepler observations, including the characteristic depression in the linewidths around the frequency of maximum oscillation power. Furthermore, we thoroughly test the sensitivity of the calculated damping rates to changes in the parameters of the nonlocal convection model.

Modelling linewidths of Kepler red giants in NGC 6819

NASA Astrophysics Data System (ADS)

Aarslev, Magnus J.; Houdek, Günter; Handberg, Rasmus; Christensen-Dalsgaard, Jørgen

2018-07-01

We present a comparison between theoretical, frequency-dependent, damping rates and linewidths of radial-mode oscillations in red giant stars located in the open cluster NGC 6819. The calculations adopt a time-dependent non-local convection model, with the turbulent pressure profile being calibrated to results of 3D hydrodynamical simulations of stellar atmospheres. The linewidths are obtained from extensive peakbagging of Kepler light curves. These observational results are of unprecedented quality owing to the long continuous observations by Kepler. The uniqueness of the Kepler mission also means that, for asteroseismic properties, this is the best data that will be available for a long time to come. We therefore take great care in modelling nine RGB stars in NGC 6819 using information from 3D simulations to obtain realistic temperature stratifications and calibrated turbulent pressure profiles. Our modelled damping rates reproduce well the Kepler observations, including the characteristic depression in the linewidths around the frequency of maximum oscillation power. Furthermore, we thoroughly test the sensitivity of the calculated damping rates to changes in the parameters of the non-local convection model.

LANDSAT 2 world standard catalog, 1 May - 31 July 1978. [LANDSAT imagery for May through July 1978

NASA Technical Reports Server (NTRS)

1978-01-01

Information regarding the availability of LANDSAT imagery processed and input to the data files by the NASA Data Processing Facility is published on a monthly basis. The U.S. Standard Catalog includes imagery covering the continental United States, Alaska and Hawaii. The Non-U.S. Standard Catalog identifies all the remaining coverage. Sections 1 and 2 describe the contents and format for the catalogs and the associated microfilm. Section 3 provides a cross-reference defining the beginning and ending dates for LANDSAT cycles.

Fossil Cores In The Kepler Data

NASA Astrophysics Data System (ADS)

Jackson, Brian

Most gas giant exoplanets with orbital periods < few days are unstable against tidal decay and may be tidally disrupted before their host stars leave the main sequence. These gas giants probably contain rocky/icy cores, and so their cores will be stranded near their progenitor's Roche limit (few hours orbital period). These fossil cores will evade the Kepler mission's transit search because it is focused on periods > 0.5 days, but finding these fossil cores would provide unprecedented insights into planetary interiors and formation ? e.g., they would be a smoking gun favoring formation of gas giants via core accretion. We propose to search for and characterize fossil cores in the Kepler dataset. We will vet candidates using the Kepler photometry and auxiliary data, collect ground-based spectra of the host stars and radial-velocity (RV) and adaptive optics (AO) data to corroborate candidates. We will also constrain stellar tidal dissipation efficiencies (parameterized by Q) by determining our survey's completeness, elucidating dynamical origins and evolution of exoplanets even if we find no fossil cores. Our preliminary search has already found several dozen candidates, so the proposed survey has a high likelihood of success.

Introducing Triquetrum, A Possible Future for Kepler and Ptolemy II

DOE Office of Scientific and Technical Information (OSTI.GOV)

Brooks, Christopher; Billings, Jay Jay

Triquetrum is an open platform for managing and executing scientific workflows that is under development as an Eclipse project. Both Triquetrum and Kepler use Ptolemy II as their execution engine. Triquetrum presents opportunities and risks for the Kepler community. The opportunities include a possibly larger community for interaction and a path for Kepler to move from Kepler's one-off ant-based build environment towards a more common OSGi-based environment and a way to maintain a stable Ptolemy II core. The risks include the fact that Triquetrum is a fork of Ptolemy II that would result in package name changes and other possiblemore » changes. In addition, Triquetrum is licensed under the Eclipse Public License v1.0, which includes a patent clause that could conflict with the University of California patent clause. This paper describes these opportunities and risks.« less

LANDSAT US standard catalog, 1-31 March 1976

NASA Technical Reports Server (NTRS)

1976-01-01

The U.S. Standard Catalog lists U.S. imagery acquired by LANDSAT 1 and LANDSAT 2 which has been processed and input to the data files during the referenced month. Data, such as date acquired, cloud cover and image quality are given for each scene. The microfilm roll and frame on which the scene may be found is also given.

VALFAST: Secure Probabilistic Validation of Hundreds of Kepler Planet Candidates

NASA Astrophysics Data System (ADS)

Morton, Tim; Petigura, E.; Johnson, J. A.; Howard, A.; Marcy, G. W.; Baranec, C.; Law, N. M.; Riddle, R. L.; Ciardi, D. R.; Robo-AO Team

2014-01-01

The scope, scale, and tremendous success of the Kepler mission has necessitated the rapid development of probabilistic validation as a new conceptual framework for analyzing transiting planet candidate signals. While several planet validation methods have been independently developed and presented in the literature, none has yet come close to addressing the entire Kepler survey. I present the results of applying VALFAST---a planet validation code based on the methodology described in Morton (2012)---to every Kepler Object of Interest. VALFAST is unique in its combination of detail, completeness, and speed. Using the transit light curve shape, realistic population simulations, and (optionally) diverse follow-up observations, it calculates the probability that a transit candidate signal is the result of a true transiting planet or any of a number of astrophysical false positive scenarios, all in just a few minutes on a laptop computer. In addition to efficiently validating the planetary nature of hundreds of new KOIs, this broad application of VALFAST also demonstrates its ability to reliably identify likely false positives. This extensive validation effort is also the first to incorporate data from all of the largest Kepler follow-up observing efforts: the CKS survey of ~1000 KOIs with Keck/HIRES, the Robo-AO survey of >1700 KOIs, and high-resolution images obtained through the Kepler Follow-up Observing Program. In addition to enabling the core science that the Kepler mission was designed for, this methodology will be critical to obtain statistical results from future surveys such as TESS and PLATO.

The mass of the super-Earth orbiting the brightest Kepler planet hosting star

NASA Astrophysics Data System (ADS)

Lopez-Morales, Mercedes; HARPS-N Team

2016-01-01

HD 179070, aka Kepler-21, is a V = 8.25 oscillating F6IV star and the brightest exoplanet host discovered by Kepler. An early analysis of the Q0 - Q5 Kepler light curves by Howell et al. (2012) revealed transits of a planetary companion, Kepler-21b, with a radius of 1.6 R_Earth and an orbital period of 2.7857 days. However, they could not determine the mass of the planet from the initial radial velocity observations with Keck-HIRES, and were only able to impose a 2s upper limit of about 10 M_Earth. Here we present 82 new radial velocity observations of this system obtained with the HARPS-N spectrograph. We detect the Doppler shift signal of Kepler-21b at the 3.6s level, and measure a planetary mass of 5.9 ± 1.6 M_Earth. We also update the radius of the planet to 1.65 ± 0.08 R_Earth, using the now available Kepler Q0 - Q17 photometry for this target. The mass of Kepler-21b appears to fall on the apparent dividing line between super-Earths that have lost all the material in their outer layers and those that have retained a significant amount of volatiles. Based on our results Kepler-21b belongs to the first group. Acknowledgement: This work was supported by funding from the NASA XRP Program and the John Templeton Foundation.

Using Kepler Light Curves for Astronomy Education and Public Outreach

NASA Astrophysics Data System (ADS)

Cash, Jennifer; Rivers, S.; Eleby, J.; Gould, A.; Komatsu, T.

2014-01-01

We will present our efforts related to Education and Public Outreach activities using Kepler Light Curves. We are currently developing interactive web based activities to introduce the public to the general topic of Stellar Variability and Intrinsic Variable Stars in particular using the high quality light curves of over a dozen Kepler targets. Along with the public website, we are exploring areas to develop teacher guides to use Kepler Light Curves in the middle and high school classrooms. These efforts are supported through a NASA EPSCoR grant "South Carolina Joint Venture Program" via a subaward to SC State University.

Size of Kepler Planet Candidates

NASA Image and Video Library

2013-01-07

Kepler data has increased by 20 percent and now totals 2,740 potential planets orbiting 2,036 stars; dramatic increases are seen in the number of Earth-size and super Earth-size candidates discovered.

An independent planet search in the Kepler dataset. I. One hundred new candidates and revised Kepler objects of interest

NASA Astrophysics Data System (ADS)

Ofir, A.; Dreizler, S.

2013-07-01

Aims: We present first results of our efforts to re-analyze the Kepler photometric dataset, searching for planetary transits using an alternative processing pipeline to the one used by the Kepler mission Methods: The SARS pipeline was tried and tested extensively by processing all available CoRoT mission data. For this first paper of the series we used this pipeline to search for (additional) planetary transits only in a small subset of stars - the Kepler objects of interest (KOIs), which are already known to include at least one promising planet candidate. Results: Although less than 1% of the Kepler dataset are KOIs we are able to significantly update the overall statistics of planetary multiplicity: we find 84 new transit signals on 64 systems on these light curves (LCs) only, nearly doubling the number of transit signals in these systems. Forty-one of the systems were singly-transiting systems that are now multiply-transiting. This significantly reduces the chances of false positive in them. Notable among the new discoveries are KOI 435 as a new six-candidate system (of which kind only Kepler-11 was known before), KOI 277 (which includes two candidates in a 6:7 period commensurability that has anti-correlated transit timing variations) - all but validating the system, KOIs 719, 1574, and 1871 that have small planet candidates (1.15,2.05 and 1.71 R⊕) in the habitable zone of their host star, and KOI 1843 that exhibits the shortest period (4.25 h) and is among the smallest (0.63 R⊕) of all planet candidates. We are also able to reject 11 KOIs as eclipsing binaries based on photometry alone, update the ephemeris for five KOIs and otherwise discuss a number of other objects, which brings the total of new signals and revised KOIs in this study to more than one hundred. Interestingly, a large fraction, about ~1/3, of the newly detected candidates participate in period commensurabilities. Finally, we discuss the possible overestimation of parameter errors in the

Vulcan Identification of Eclipsing Binaries in the Kepler Field of View

NASA Astrophysics Data System (ADS)

Mjaseth, Kimberly; Batalha, N.; Borucki, W.; Caldwell, D.; Latham, D.; Martin, K. R.; Rabbette, M.; Witteborn, F.

2007-05-01

We report the discovery of 236 new eclipsing binary stars located in and around the field of view of the Kepler Mission. The binaries were identified from photometric light curves from the Vulcan exoplanet transit survey. The Vulcan camera is comprised of a modest aperture (10cm) f/2.8 Canon lens focusing a 7° x 7° field of view onto a 4096 x 4096 Kodak CCD. The system yields an hour-to-hour relative precision of 0.003 on 12th magnitude stars and saturates at 9th magnitude. The binaries have magnitudes in the range of 9.5 < V < 13.5 and periods ranging from 0.5 to 13 days. The milli-magnitude photometric precision allows detection of transits as shallow as 1%. The catalog contains a total of 273 eclipsing binary stars, including detached systems (high and low mass ratio), contact binaries, and triple systems. We present the derived orbital/transit properties, light curves, and stellar properties for selected targets. In addition, we summarize the results of radial velocity follow-up work. Support for this work came from NASA's Discovery Program and NASA's Origins of the Solar System Program.

A [Ce21] keplerate.

PubMed

Canaj, Angelos B; Siczek, Milosz; Lis, Tadeusz; Murrie, Mark; Brechin, Euan K; Milios, Constantinos J

2017-06-28

The solvothermal reaction between Ce(NO 3 ) 3 ·6H 2 O, 2-amino-isobutyric acid, 2-hydroxy-1-naphthaldehyde and 2-amino-2-methyl-1,3-propanediol in MeOH, in the presence of base, leads to the formation of a unique [CeCe ] keplerate cage.

Detecting planets in Kepler lightcurves using methods developed for CoRoT.

NASA Astrophysics Data System (ADS)

Grziwa, S.; Korth, J.; Pätzold, M.

2011-10-01

Launched in March 2009, Kepler is the second space telescope dedicated to the search for extrasolar planets. NASA released 150.000 lightcurves to the public in 2010 and announced that Kepler has found 1.235 candidates. The Rhenish Institute for Environmental Research (RIU-PF) is one of the detection groups from the CoRoT space mission. RIU-PF developed the software package EXOTRANS for the detection of transits in stellar lightcurves. EXOTRANS is designed for the fast automated processing of huge amounts of data and was easily adapted to the analysis of Kepler lightcurves. The use of different techniques and philosophies helps to find more candidates and to rule out others. We present the analysis of the Kepler lightcurves with EXOTRANS. Results of our filter (trend, harmonic) and detection (dcBLS) techniques are compared with the techniques used by Kepler (PDC, TPS). The different approaches to rule out false positives are discussed and additional candidates found by EXOTRANS are presented.

Validation and Initial Characterization of the Long-period Planet Kepler-1654 b

NASA Astrophysics Data System (ADS)

Beichman, C. A.; Giles, H. A. C.; Akeson, R.; Ciardi, D.; Christiansen, J.; Isaacson, H.; Marcy, G. M.; Sinukoff, E.; Greene, T.; Fortney, J. J.; Crossfield, I.; Hu, R.; Howard, A. W.; Petigura, E. A.; Knutson, H. A.

2018-04-01

Fewer than 20 transiting Kepler planets have periods longer than one year. Our early search of the Kepler light curves revealed one such system, Kepler-1654b (originally KIC 8410697b), which shows exactly two transit events and whose second transit occurred only five days before the failure of the second of two reaction wheels brought the primary Kepler mission to an end. A number of authors have also examined light curves from the Kepler mission searching for long-period planets and identified this candidate. Starting in 2014 September, we began an observational program of imaging, reconnaissance spectroscopy, and precision radial velocity (RV) measurements that confirm with a high degree of confidence that Kepler-1654b is a bona fide transiting planet orbiting a mature G5V star (T eff = 5580 K, [Fe/H] = ‑0.08) with a semimajor axis of 2.03 au, a period of 1047.84 days, and a radius of 0.82 ± 0.02 R Jup. RV measurements using Keck’s HIRES spectrometer obtained over 2.5 years set a limit to the planet’s mass of <0.5 (3σ) M Jup. The bulk density of the planet is similar to that of Saturn or possibly lower. We assess the suitability of temperate gas giants like Kepler-1654b for transit spectroscopy with the James Webb Space Telescope, as their relatively cold equilibrium temperatures (T pl ∼ 200 K) make them interesting from the standpoint of exoplanet atmospheric physics. Unfortunately, these low temperatures also make the atmospheric scale heights small and thus transmission spectroscopy challenging. Finally, the long time between transits can make scheduling JWST observations difficult—as is the case with Kepler-1654b.

Stargate: An Open Stellar Catalog for NASA Exoplanet Exploration

NASA Astrophysics Data System (ADS)

Tanner, Angelle

NASA is invested in a number of space- and ground-based efforts to find extrasolar planets around nearby stars with the ultimate goal of discovering an Earth 2.0 viable for searching for bio-signatures in its atmosphere. With both sky-time and funding resources extremely precious it is crucial that the exoplanet community has the most efficient and functional tools for choosing which stars to observe and then deriving the physical properties of newly discovered planets via the properties of their host stars. Historically, astronomers have utilized a piecemeal set of archives such as SIMBAD, the Washington Double Star Catalog, various exoplanet encyclopedias and electronic tables from the literature to cobble together stellar and planetary parameters in the absence of corresponding images and spectra. The mothballed NStED archive was in the process of collecting such data on nearby stars but its course may have changed if it comes back to NASA mission specific targets and NOT a volume limited sample of nearby stars. This means there is void. A void in the available set of tools many exoplanet astronomers would appreciate to create comprehensive lists of the stellar parameters of stars in our local neighborhood. Also, we need better resources for downloading adaptive optics images and published spectra to help confirm new discoveries and find ideal target stars. With so much data being produced by the stellar and exoplanet community we have decided to propose for the creation of an open access archive in the spirit of the open exoplanet catalog and the Kepler Community Follow-up Program. While we will highly regulate and constantly validate the data being placed into our archive the open nature of its design is intended to allow the database to be updated quickly and have a level of versatility which is necessary in today's fast moving, big data exoplanet community. Here, we propose to develop the Stargate Open stellar catalog for NASA exoplanet exploration.

CHANGING PHASES OF ALIEN WORLDS: PROBING ATMOSPHERES OF KEPLER PLANETS WITH HIGH-PRECISION PHOTOMETRY

DOE Office of Scientific and Technical Information (OSTI.GOV)

Esteves, Lisa J.; Mooij, Ernst J. W. De; Jayawardhana, Ray, E-mail: esteves@astro.utoronto.ca, E-mail: demooij@astro.utoronto.ca, E-mail: rayjay@yorku.ca

We present a comprehensive analysis of planetary phase variations, including possible planetary light offsets, using eighteen quarters of data from the Kepler space telescope. Our analysis found fourteen systems with significant detections in each of the phase curve components: planet’s phase function, secondary eclipse, Doppler boosting, and ellipsoidal variations. We model the full phase curve simultaneously, including primary and secondary transits, and derive albedos, day- and night-side temperatures and planet masses. Most planets manifest low optical geometric albedos (< 0.25), with the exception of Kepler-10b, Kepler-91b, and KOI-13b. We find that KOI-13b, with a small eccentricity of 0.0006 ± 0.0001,more » is the only planet for which an eccentric orbit is favored. We detect a third harmonic for HAT-P-7b for the first time, and confirm the third harmonic for KOI-13b reported in Esteves et al.: both could be due to their spin–orbit misalignments. For six planets, we report a planetary brightness peak offset from the substellar point: of those, the hottest two (Kepler-76b and HAT-P-7b) exhibit pre-eclipse shifts or on the evening-side, while the cooler four (Kepler-7b, Kepler-8b, Kepler-12b, and Kepler-41b) peak post-eclipse or on the morning-side. Our findings dramatically increase the number of Kepler planets with detected planetary light offsets, and provide the first evidence in the Kepler data for a correlation between the peak offset direction and the planet’s temperature. Such a correlation could arise if thermal emission dominates light from hotter planets that harbor hot spots shifted toward the evening-side, as theoretically predicted, while reflected light dominates cooler planets with clouds on the planet’s morning-side.« less

Constraining the Radiation and Plasma Environment of the Kepler Circumbinary Habitable-zone Planets

NASA Astrophysics Data System (ADS)

Zuluaga, Jorge I.; Mason, Paul A.; Cuartas-Restrepo, Pablo A.

2016-02-01

The discovery of many planets using the Kepler telescope includes 10 planets orbiting eight binary stars. Three binaries, Kepler-16, Kepler-47, and Kepler-453, have at least one planet in the circumbinary habitable zone (BHZ). We constrain the level of high-energy radiation and the plasma environment in the BHZ of these systems. With this aim, BHZ limits in these Kepler binaries are calculated as a function of time, and the habitability lifetimes are estimated for hypothetical terrestrial planets and/or moons within the BHZ. With the time-dependent BHZ limits established, a self-consistent model is developed describing the evolution of stellar activity and radiation properties as proxies for stellar aggression toward planetary atmospheres. Modeling binary stellar rotation evolution, including the effect of tidal interaction between stars in binaries, is key to establishing the environment around these systems. We find that Kepler-16 and its binary analogs provide a plasma environment favorable for the survival of atmospheres of putative Mars-sized planets and exomoons. Tides have modified the rotation of the stars in Kepler-47, making its radiation environment less harsh in comparison to the solar system. This is a good example of the mechanism first proposed by Mason et al. Kepler-453 has an environment similar to that of the solar system with slightly better than Earth radiation conditions at the inner edge of the BHZ. These results can be reproduced and even reparameterized as stellar evolution and binary tidal models progress, using our online tool http://bhmcalc.net.

CONSTRAINING THE RADIATION AND PLASMA ENVIRONMENT OF THE KEPLER CIRCUMBINARY HABITABLE-ZONE PLANETS

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zuluaga, Jorge I.; Mason, Paul A.; Cuartas-Restrepo, Pablo A.

The discovery of many planets using the Kepler telescope includes 10 planets orbiting eight binary stars. Three binaries, Kepler-16, Kepler-47, and Kepler-453, have at least one planet in the circumbinary habitable zone (BHZ). We constrain the level of high-energy radiation and the plasma environment in the BHZ of these systems. With this aim, BHZ limits in these Kepler binaries are calculated as a function of time, and the habitability lifetimes are estimated for hypothetical terrestrial planets and/or moons within the BHZ. With the time-dependent BHZ limits established, a self-consistent model is developed describing the evolution of stellar activity and radiation propertiesmore » as proxies for stellar aggression toward planetary atmospheres. Modeling binary stellar rotation evolution, including the effect of tidal interaction between stars in binaries, is key to establishing the environment around these systems. We find that Kepler-16 and its binary analogs provide a plasma environment favorable for the survival of atmospheres of putative Mars-sized planets and exomoons. Tides have modified the rotation of the stars in Kepler-47, making its radiation environment less harsh in comparison to the solar system. This is a good example of the mechanism first proposed by Mason et al. Kepler-453 has an environment similar to that of the solar system with slightly better than Earth radiation conditions at the inner edge of the BHZ. These results can be reproduced and even reparameterized as stellar evolution and binary tidal models progress, using our online tool http://bhmcalc.net.« less

An Introduction to Exoplanets and the Kepler Mission

NASA Technical Reports Server (NTRS)

Lissauer, Jack

2014-01-01

A quarter century ago, the only planets known to humanity were the familiar objects that orbit our Sun. But improved observational techniques allowed astronomers to begin detecting planets around other stars in the 1990s. The first extrasolar planets (often referred to as exoplanets) to be discovered were quite exotic and unfamiliar objects. Most were giant objects that are hundreds of times as massive as the Earth and orbit so close to their star that they are hotter than pizza ovens. But as observational capabilities improved, smaller and cooler planets were found. The most capable planet-hunting tool developed to date is NASA's Kepler telescope, which was launched in 2009. Kepler has found that planets similar in size to our Earth are quite abundant within our galaxy. Results of Kepler's research will be summarized and placed into context within the new and growing discipline of exoplanet studies.

THE POSSIBLE MOON OF KEPLER-90g IS A FALSE POSITIVE

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kipping, D. M.; Torres, G.; Buchhave, L. A.

2015-01-20

The discovery of an exomoon would provide deep insights into planet formation and the habitability of planetary systems, with transiting examples being particularly sought after. Of the hundreds of Kepler planets now discovered, the seven-planet system Kepler-90 is unusual for exhibiting an unidentified transit-like signal in close proximity to one of the transits of the long-period gas-giant Kepler-90g, as noted by Cabrera et al. As part of the ''Hunt for Exomoons with Kepler'' project, we investigate this possible exomoon signal and find it passes all conventional photometric, dynamical, and centroid diagnostic tests. However, pixel-level light curves indicate that the moon-like signalmore » occurs on nearly all of the target's pixels, which we confirm using a novel way of examining pixel-level data which we dub the ''transit centroid''. This test reveals that the possible exomoon to Kepler-90g is likely a false positive, perhaps due to a cosmic ray induced sudden pixel sensitivity dropout. This work highlights the extreme care required for seeking non-periodic low-amplitude transit signals, such as exomoons.« less

No Timing Variations Observed in Third Transit of Snow-line Exoplanet Kepler-421b

NASA Astrophysics Data System (ADS)

Dalba, Paul A.; Muirhead, Philip S.

2016-07-01

We observed Kepler-421 during the anticipated third transit of the snow-line exoplanet Kepler-421b in order to constrain the existence and extent of transit timing variations (TTVs). Previously, the Kepler spacecraft only observed two transits of Kepler-421b, leaving the planet’s transit ephemeris unconstrained. Our visible light, time-series observations from the 4.3 m Discovery Channel Telescope were designed to capture pre-transit baseline and the partial transit of Kepler-421b, barring significant TTVs. We use the light curves to assess the probabilities of various transit models using both the posterior odds ratio and the Bayesian Information Criterion, and find that a transit model with no TTVs is favored to 3.6σ confidence. These observations suggest that Kepler-421b is either alone in its system or is only experiencing minor dynamic interactions with an unseen companion. With the Kepler-421b ephemeris constrained, we calculate future transit times and discuss the opportunity to characterize the atmosphere of this cold, long-period exoplanet via transmission spectroscopy. Our investigation emphasizes the difficulties associated with observing long-period exoplanet transits and the consequences that arise from failing to refine transit ephemerides.

STUDYING ATMOSPHERE-DOMINATED HOT JUPITER KEPLER PHASE CURVES: EVIDENCE THAT INHOMOGENEOUS ATMOSPHERIC REFLECTION IS COMMON

DOE Office of Scientific and Technical Information (OSTI.GOV)

Shporer, Avi; Hu, Renyu

2015-10-15

We identify three Kepler transiting planets, Kepler-7b, Kepler-12b, and Kepler-41b, whose orbital phase-folded light curves are dominated by planetary atmospheric processes including thermal emission and reflected light, while the impact of non-atmospheric (i.e., gravitational) processes, including beaming (Doppler boosting) and tidal ellipsoidal distortion, is negligible. Therefore, those systems allow a direct view of their atmospheres without being hampered by the approximations used in the inclusion of both atmospheric and non-atmospheric processes when modeling the phase-curve shape. We present here the analysis of Kepler-12b and Kepler-41b atmosphere based on their Kepler phase curve, while the analysis of Kepler-7b was already presentedmore » elsewhere. The model we used efficiently computes reflection and thermal emission contributions to the phase curve, including inhomogeneous atmospheric reflection due to longitudinally varying cloud coverage. We confirm Kepler-12b and Kepler-41b show a westward phase shift between the brightest region on the planetary surface and the substellar point, similar to Kepler-7b. We find that reflective clouds located on the west side of the substellar point can explain the phase shift. The existence of inhomogeneous atmospheric reflection in all three of our targets, selected due to their atmosphere-dominated Kepler phase curve, suggests this phenomenon is common. Therefore, it is also likely to be present in planetary phase curves that do not allow a direct view of the planetary atmosphere as they contain additional orbital processes. We discuss the implications of a bright-spot shift on the analysis of phase curves where both atmospheric and gravitational processes appear, including the mass discrepancy seen in some cases between the companion’s mass derived from the beaming and ellipsoidal photometric amplitudes. Finally, we discuss the potential detection of non-transiting but otherwise similar planets, whose mass is

THE ALBEDOS OF KEPLER'S CLOSE-IN SUPER-EARTHS

DOE Office of Scientific and Technical Information (OSTI.GOV)

Demory, Brice-Olivier, E-mail: bod21@cam.ac.uk

Exoplanet research focusing on the characterization of super-Earths is currently limited to the handful of targets orbiting bright stars that are amenable to detailed study. This Letter proposes to look at alternative avenues to probe the surface and atmospheric properties of this category of planets, known to be ubiquitous in our galaxy. I conduct Markov Chain Monte Carlo light-curves analyses for 97 Kepler close-in R{sub P} ≲ 2.0 R {sub ⊕} super-Earth candidates with the aim of detecting their occultations at visible wavelengths. Brightness temperatures and geometric albedos in the Kepler bandpass are constrained for 27 super-Earth candidates. A hierarchicalmore » Bayesian modeling approach is then employed to characterize the population-level reflective properties of these close-in super-Earths. I find median geometric albedos A{sub g} in the Kepler bandpass ranging between 0.16 and 0.30, once decontaminated from thermal emission. These super-Earth geometric albedos are statistically larger than for hot Jupiters, which have medians A{sub g} ranging between 0.06 and 0.11. A subset of objects, including Kepler-10b, exhibit significantly larger albedos (A{sub g} ≳ 0.4). I argue that a better understanding of the incidence of stellar irradation on planetary surface and atmospheric processes is key to explain the diversity in albedos observed for close-in super-Earths.« less

A SEMI-ANALYTICAL MODEL OF VISIBLE-WAVELENGTH PHASE CURVES OF EXOPLANETS AND APPLICATIONS TO KEPLER- 7 B AND KEPLER- 10 B

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hu, Renyu; Demory, Brice-Olivier; Seager, Sara

2015-03-20

Kepler has detected numerous exoplanet transits by measuring stellar light in a single visible-wavelength band. In addition to detection, the precise photometry provides phase curves of exoplanets, which can be used to study the dynamic processes on these planets. However, the interpretation of these observations can be complicated by the fact that visible-wavelength phase curves can represent both thermal emission and scattering from the planets. Here we present a semi-analytical model framework that can be applied to study Kepler and future visible-wavelength phase curve observations of exoplanets. The model efficiently computes reflection and thermal emission components for both rocky andmore » gaseous planets, considering both homogeneous and inhomogeneous surfaces or atmospheres. We analyze the phase curves of the gaseous planet Kepler- 7 b and the rocky planet Kepler- 10 b using the model. In general, we find that a hot exoplanet’s visible-wavelength phase curve having a significant phase offset can usually be explained by two classes of solutions: one class requires a thermal hot spot shifted to one side of the substellar point, and the other class requires reflective clouds concentrated on the same side of the substellar point. Particularly for Kepler- 7 b, reflective clouds located on the west side of the substellar point can best explain its phase curve. The reflectivity of the clear part of the atmosphere should be less than 7% and that of the cloudy part should be greater than 80%, and the cloud boundary should be located at 11° ± 3° to the west of the substellar point. We suggest single-band photometry surveys could yield valuable information on exoplanet atmospheres and surfaces.« less

LANDSAT 2 world standard catalog, 1 Jan. - 30 Apr. 1978

NASA Technical Reports Server (NTRS)

1978-01-01

The World Standard Catalog lists imagery acquired by LANDSAT 2 which has been processed and input to the data files during the referenced months. Data, such as cloud cover and image quality, are given for each scene. The microfilm roll and frame on which the scene may be found is also given.

Precision Astrophysics Experiments with the Kepler Satellite

NASA Astrophysics Data System (ADS)

Jackiewicz, Jason

2012-10-01

Long photometric observations from space of tens of thousands of stars, such as those provided by Kepler, offer unique opportunities to carry out ensemble astrophysics as well as detailed studies of individual objects. One of the primary tools at our disposal for understanding pulsating stars is asteroseismology, which uses observed stellar oscillation frequencies to determine interior properties. This can provide very strict constraints on theories of stellar evolution, structure, and the population characteristics of stars in the Milky Way galaxy. This talk will focus on several of the exciting insights Kepler has enabled through asteroseismology of stars across the H-R diagram.

The discovery of two pulsating subdwarf B stars in NGC 6791 using Kepler data

NASA Astrophysics Data System (ADS)

Reed, M. D.; Baran, A.; Østensen, R. H.; Telting, J.; O'Toole, S. J.

2012-12-01

We report the discovery of two new pulsating subdwarf B (sdB) stars in the open cluster NGC 6791 using data from the Kepler spacecraft. Three sdB stars were observed for one month in short-cadence (1 min) mode and three months in long-cadence (30 min) mode during Quarter 11 (fall 2011). The stars have Kepler Input Catalogue numbers of 2437937, 2569576 and 2569583 with previous designations of B5, B3 and B6, respectively. Another sdB star exists in the cluster and it is also known to be a pulsator. We also obtained Nordic Optical Telescope spectra to update effective temperatures, surface gravities and helium abundances and compare the spectroscopic properties of all four stars on a uniform model grid. We detect four periodicities between 0.9 and 2.4 h in B3 above a detection limit of 0.53 parts per thousand (ppt) and nine periodicities between 1.1 and 2.2 h in B5 above a detection limit of 0.37 ppt. No pulsations were detected in B6 to the detection threshold of 0.29 ppt. The long-cadence data were less useful as few observations are obtained per pulsation period, yet they do indicate that the pulsations are variable from month to month. The spacings between the pulsation periods are similar to other g-mode pulsating sdB stars observed by Kepler, indicating that the periodicities can be associated witquals; 1 modes. A fit to the periods give spacings of 234.6 ± 0.6 and 242.6 ± 1.5 s for B3 and B5, respectively.

Gravity, Rotation, Ages, and Magnetism of Solar-like Stars and Red Giants observed by Kepler and K2

NASA Astrophysics Data System (ADS)

Mathur, Savita

Scientific Objectives: Asteroseismology has proved to be a very powerful tool thanks to the high-precision data obtained by the space missions such as Kepler and CoRoT. Solar-like oscillations have been detected and reported for around 15,600 red giants and 540 main-sequence stars observed by the nominal Kepler mission. Hence, these stars have their surface gravities, masses, and radii obtained with seismology. However, according to the latest Kepler star properties catalog (Mathur et al., in prep.) more than 24,000 red giants, 127,000 FGK dwarfs, and 10,000 subgiants were targeted. K2 has been observing 90,000 red giants and dwarfs. Moreover, the continuous photometric data of 4 yrs (resp. 3 mo) collected by Kepler (resp. K2) contain the signature of other phenomena such as convection, rotation, and magnetism, which are very important to understand stellar evolution and can also be used to obtain precise fundamental stellar parameters even when pulsations are not detected. We propose to perform the largest homogeneous analysis to date of seismic oscillations, convection, and rotation/magnetic activity across the full range of stellar spectral types and evolutionary states present in the K2 and Kepler missions. We will use the longest publicly available time series to derive the most accurate surface gravities, rotation periods, evolutionary states, and magnetic activity levels to characterize rotation-age-magnetic activity relationships and oscillations-magnetism interaction. Relevance: The determination of the gravity, mass, radius, and age of planet host stars allow us to better characterize the planetary systems. By studying the stellar surface rotation periods, we can better understand the angular momentum transport involved during the stellar evolution and have more accurate rotation-age relationships. Finally, the study of the magnetic activity of a large number of stars will allow us to put the Sun in a broader context. This work will also have an impact on

The Kepler Data Processing Handbook: A Field Guide to Prospecting for Habitable Worlds

NASA Technical Reports Server (NTRS)

Jenkins, Jon M.

2017-01-01

The Kepler telescope hurtled into orbit in March 2009, initiating NASA's first mission to discover Earth-size planets orbiting Sun-like stars. Kepler simultaneously collected data for approximately 165,000 target stars at a time over its four-year mission, identifying over 4700 planet candidates, over 2300 confirmed or validated planets, and over 2100 eclipsing binaries. While Kepler was designed to discover exoplanets, the long-term, ultrahigh photometric precision measurements it achieved made it a premier observational facility for stellar astrophysics, especially in the field of asteroseismology, and for variable stars, such as RR Lyrae. The Kepler Science Operations Center (SOC) was developed at NASA Ames Research Center to process the data acquired by Kepler from pixel-level calibrations all the way to identifying transiting planet signatures and subjecting them to a suite of diagnostic tests to establish or break confidence in their planetary nature. Detecting small, rocky planets transiting Sun-like stars presents a variety of daunting challenges, including achieving an unprecedented photometric precision of 20 ppm on 6.5-hour timescales, and supporting the science operations, management, processing, and repeated reprocessing of the accumulating data stream. A newly revised and expanded version of the Kepler Data Processing Handbook (KDPH) has been released to support the legacy archival products. The KDPH details the theory, design and performance of the algorithms supporting each data processing step. This paper presents an overview of the KDPH and features illustrations of several key algorithms in the Kepler Science Data Processing Pipeline. Kepler was selected as the 10th mission of the Discovery Program. Funding for this mission is provided by NASA, Science Mission Directorate.

The Fruits of Kepler's Struggle.

ERIC Educational Resources Information Center

Belonuchkin, B. E.

1992-01-01

Presents six learning activities dealing with planetary motion, the launching of satellites, and Halley's comet, all of which utilize the three laws of Johannes Kepler. These three laws are discussed in detail, and answers to the activities are provided. (KR)

Kepler's theory of force and his medical sources.

PubMed

Regier, Jonathan

2014-01-01

Johannes Kepler (1571-1630) makes extensive use of souls and spiritus in his natural philosophy. Recent studies have highlighted their importance in his accounts of celestial generation and astrology. In this study, I would like to address two pressing issues. The first is Kepler's context. The biological side of his natural philosophy is not naively Aristotelian. Instead, he is up to date with contemporary discussions in medically flavored natural philosophy. I will examine his relationship to Melanchthon's anatomical-theological Liber de anima (1552) and to Jean Femel's very popular Physiologia (1567), two Galenic sources with a noticeable impact on how he understands the functions of life. The other issue that will direct my article is force at a distance. Medical ideas deeply inform Kepler's theories of light and solar force (virtus motrix). It will become clear that they are not a hindrance even to the hardcore of his celestial physics. Instead, he makes use of soul and spiritus in order to develop a fully mathematized dynamics.

LANDSAT non-US standard catalog, 1-31 May 1976

NASA Technical Reports Server (NTRS)

1976-01-01

The non-U.S. standard catalog lists non-U.S. imagery acquired by LANDSAT 1 and LANDSAT 2 which has been processed and input to the data files during the referenced month. Data, such as date acquired, cloud cover and image quality are given for each scene. The microfilm roll and frame on which the scene may be found is also given.

Planet Hunters, Undergraduate Research, and Detection of Extrasolar Planet Kepler-818 b

NASA Astrophysics Data System (ADS)

Baker, David; Crannell, Graham; Duncan, James; Hays, Aryn; Hendrix, Landon

2017-01-01

Detection of extrasolar planets provides an excellent research opportunity for undergraduate students. In Spring 2012, we searched for transiting extrasolar planets using Kepler spacecraft data in our Research Experience in Physics course at Austin College. Offered during the regular academic year, these Research Experience courses engage students in the scientific process, including proposal writing, paper submission, peer review, and oral presentations. Since 2004, over 190 undergraduate students have conducted authentic scientific research through Research Experience courses at Austin College.Zooniverse’s citizen science Planet Hunters web site offered an efficient method for rapid analysis of Kepler data. Light curves from over 5000 stars were analyzed, of which 2.3% showed planetary candidates already tagged by the Kepler team. Another 1.5% of the light curves suggested eclipsing binary stars, and 1.6% of the light curves had simulated planets for training purposes.One of the stars with possible planetary transits had not yet been listed as a planetary candidate. We reported possible transits for Kepler ID 4282872, which later was promoted to planetary candidate KOI-1325 in 2012 and confirmed to host extrasolar planet Kepler-818 b in 2016 (Morton et al. 2016). Kepler-818 b is a “hot Neptune” with period 10.04 days, flux decrease during transit ~0.4%, planetary radius 4.69 Earth radii, and semi-major axis 0.089 au.

LANDSAT 3 world standard catalog, 6 March - 31 July 1978

NASA Technical Reports Server (NTRS)

1978-01-01

The World Standard Catalog lists imagery acquired by LANDSAT 3 which was processed and input to the data files during the referenced period. Information such as date of entry, cloud cover, and image quality is given for each scene. The microfilm roll and frame on which the scene may be found is also indicated.

NO TIMING VARIATIONS OBSERVED IN THIRD TRANSIT OF SNOW-LINE EXOPLANET KEPLER-421b

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dalba, Paul A.; Muirhead, Philip S., E-mail: pdalba@bu.edu

2016-07-20

We observed Kepler-421 during the anticipated third transit of the snow-line exoplanet Kepler-421b in order to constrain the existence and extent of transit timing variations (TTVs). Previously, the Kepler spacecraft only observed two transits of Kepler-421b, leaving the planet’s transit ephemeris unconstrained. Our visible light, time-series observations from the 4.3 m Discovery Channel Telescope were designed to capture pre-transit baseline and the partial transit of Kepler-421b, barring significant TTVs. We use the light curves to assess the probabilities of various transit models using both the posterior odds ratio and the Bayesian Information Criterion, and find that a transit model withmore » no TTVs is favored to 3.6 σ confidence. These observations suggest that Kepler-421b is either alone in its system or is only experiencing minor dynamic interactions with an unseen companion. With the Kepler-421b ephemeris constrained, we calculate future transit times and discuss the opportunity to characterize the atmosphere of this cold, long-period exoplanet via transmission spectroscopy. Our investigation emphasizes the difficulties associated with observing long-period exoplanet transits and the consequences that arise from failing to refine transit ephemerides.« less

Kepler Supernova Remnant: A View from Spitzer Space Telescope

NASA Image and Video Library

2004-10-06

This Spitzer false-color image is a composite of data from the 24 micron channel of Spitzer's multiband imaging photometer (red), and three channels of its infrared array camera: 8 micron (yellow), 5.6 micron (blue), and 4.8 micron (green). Stars are most prominent in the two shorter wavelengths, causing them to show up as turquoise. The supernova remnant is most prominent at 24 microns, arising from dust that has been heated by the supernova shock wave, and re-radiated in the infrared. The 8 micron data shows infrared emission from regions closely associated with the optically emitting regions. These are the densest regions being encountered by the shock wave, and probably arose from condensations in the surrounding material that was lost by the supernova star before it exploded. The composite above (PIA06908, PIA06909, and PIA06910) represent views of Kepler's supernova remnant taken in X-rays, visible light, and infrared radiation. Each top panel in the composite above shows the entire remnant. Each color in the composite represents a different region of the electromagnetic spectrum, from X-rays to infrared light. The X-ray and infrared data cannot be seen with the human eye. Astronomers have color-coded those data so they can be seen in these images. http://photojournal.jpl.nasa.gov/catalog/PIA06910

Tidal Synchronization and Differential Rotation of Kepler Eclipsing Binaries

NASA Astrophysics Data System (ADS)

Lurie, John C.; Vyhmeister, Karl; Hawley, Suzanne L.; Adilia, Jamel; Chen, Andrea; Davenport, James R. A.; Jurić, Mario; Puig-Holzman, Michael; Weisenburger, Kolby L.

2017-12-01

Few observational constraints exist for the tidal synchronization rate of late-type stars, despite its fundamental role in binary evolution. We visually inspected the light curves of 2278 eclipsing binaries (EBs) from the Kepler Eclipsing Binary Catalog to identify those with starspot modulations, as well as other types of out-of-eclipse variability. We report rotation periods for 816 EBs with starspot modulations, and find that 79% of EBs with orbital periods of less than 10 days are synchronized. However, a population of short-period EBs exists, with rotation periods typically 13% slower than synchronous, which we attribute to the differential rotation of high-latitude starspots. At 10 days, there is a transition from predominantly circular, synchronized EBs to predominantly eccentric, pseudosynchronized EBs. This transition period is in good agreement with the predicted and observed circularization period for Milky Way field binaries. At orbital periods greater than about 30 days, the amount of tidal synchronization decreases. We also report 12 previously unidentified candidate δ Scuti and γ Doradus pulsators, as well as a candidate RS CVn system with an evolved primary that exhibits starspot occultations. For short-period contact binaries, we observe a period-color relation and compare it to previous studies. As a whole, these results represent the largest homogeneous study of tidal synchronization of late-type stars.

Federating Metadata Catalogs

NASA Astrophysics Data System (ADS)

Baru, C.; Lin, K.

2009-04-01

The Geosciences Network project (www.geongrid.org) has been developing cyberinfrastructure for data sharing in the Earth Science community based on a service-oriented architecture. The project defines a standard "software stack", which includes a standardized set of software modules and corresponding service interfaces. The system employs Grid certificates for distributed user authentication. The GEON Portal provides online access to these services via a set of portlets. This service-oriented approach has enabled the GEON network to easily expand to new sites and deploy the same infrastructure in new projects. To facilitate interoperation with other distributed geoinformatics environments, service standards are being defined and implemented for catalog services and federated search across distributed catalogs. The need arises because there may be multiple metadata catalogs in a distributed system, for example, for each institution, agency, geographic region, and/or country. Ideally, a geoinformatics user should be able to search across all such catalogs by making a single search request. In this paper, we describe our implementation for such a search capability across federated metadata catalogs in the GEON service-oriented architecture. The GEON catalog can be searched using spatial, temporal, and other metadata-based search criteria. The search can be invoked as a Web service and, thus, can be imbedded in any software application. The need for federated catalogs in GEON arises because, (i) GEON collaborators at the University of Hyderabad, India have deployed their own catalog, as part of the iGEON-India effort, to register information about local resources for broader access across the network, (ii) GEON collaborators in the GEO Grid (Global Earth Observations Grid) project at AIST, Japan have implemented a catalog for their ASTER data products, and (iii) we have recently deployed a search service to access all data products from the EarthScope project in the US

The classical dynamic symmetry for the U(1) -Kepler problems

NASA Astrophysics Data System (ADS)

Bouarroudj, Sofiane; Meng, Guowu

2018-01-01

For the Jordan algebra of hermitian matrices of order n ≥ 2, we let X be its submanifold consisting of rank-one semi-positive definite elements. The composition of the cotangent bundle map πX: T∗ X → X with the canonical map X → CP n - 1 (i.e., the map that sends a given hermitian matrix to its column space), pulls back the Kähler form of the Fubini-Study metric on CP n - 1 to a real closed differential two-form ωK on T∗ X. Let ωX be the canonical symplectic form on T∗ X and μ a real number. A standard fact says that ωμ ≔ωX + 2 μωK turns T∗ X into a symplectic manifold, hence a Poisson manifold with Poisson bracket {,}μ. In this article we exhibit a Poisson realization of the simple real Lie algebra su(n , n) on the Poisson manifold (T∗ X ,{,}μ) , i.e., a Lie algebra homomorphism from su(n , n) to (C∞(T∗ X , R) ,{,}μ). Consequently one obtains the Laplace-Runge-Lenz vector for the classical U(1) -Kepler problem of level n and magnetic charge μ. Since the McIntosh-Cisneros-Zwanziger-Kepler problems (MICZ-Kepler Problems) are the U(1) -Kepler problems of level 2, the work presented here is a direct generalization of the work by A. Barut and G. Bornzin (1971) on the classical dynamic symmetry for the MICZ-Kepler problems.

Using Kepler for Tool Integration in Microarray Analysis Workflows.

PubMed

Gan, Zhuohui; Stowe, Jennifer C; Altintas, Ilkay; McCulloch, Andrew D; Zambon, Alexander C

Increasing numbers of genomic technologies are leading to massive amounts of genomic data, all of which requires complex analysis. More and more bioinformatics analysis tools are being developed by scientist to simplify these analyses. However, different pipelines have been developed using different software environments. This makes integrations of these diverse bioinformatics tools difficult. Kepler provides an open source environment to integrate these disparate packages. Using Kepler, we integrated several external tools including Bioconductor packages, AltAnalyze, a python-based open source tool, and R-based comparison tool to build an automated workflow to meta-analyze both online and local microarray data. The automated workflow connects the integrated tools seamlessly, delivers data flow between the tools smoothly, and hence improves efficiency and accuracy of complex data analyses. Our workflow exemplifies the usage of Kepler as a scientific workflow platform for bioinformatics pipelines.

Exoplanet orbital eccentricities derived from LAMOST-Kepler analysis.

PubMed

Xie, Ji-Wei; Dong, Subo; Zhu, Zhaohuan; Huber, Daniel; Zheng, Zheng; De Cat, Peter; Fu, Jianning; Liu, Hui-Gen; Luo, Ali; Wu, Yue; Zhang, Haotong; Zhang, Hui; Zhou, Ji-Lin; Cao, Zihuang; Hou, Yonghui; Wang, Yuefei; Zhang, Yong

2016-10-11

The nearly circular (mean eccentricity [Formula: see text]) and coplanar (mean mutual inclination [Formula: see text]) orbits of the solar system planets motivated Kant and Laplace to hypothesize that planets are formed in disks, which has developed into the widely accepted theory of planet formation. The first several hundred extrasolar planets (mostly Jovian) discovered using the radial velocity (RV) technique are commonly on eccentric orbits ([Formula: see text]). This raises a fundamental question: Are the solar system and its formation special? The Kepler mission has found thousands of transiting planets dominated by sub-Neptunes, but most of their orbital eccentricities remain unknown. By using the precise spectroscopic host star parameters from the Large Sky Area Multi-Object Fiber Spectroscopic Telescope (LAMOST) observations, we measure the eccentricity distributions for a large (698) and homogeneous Kepler planet sample with transit duration statistics. Nearly half of the planets are in systems with single transiting planets (singles), whereas the other half are multiple transiting planets (multiples). We find an eccentricity dichotomy: on average, Kepler singles are on eccentric orbits with [Formula: see text] 0.3, whereas the multiples are on nearly circular [Formula: see text] and coplanar [Formula: see text] degree) orbits similar to those of the solar system planets. Our results are consistent with previous studies of smaller samples and individual systems. We also show that Kepler multiples and solar system objects follow a common relation [[Formula: see text](1-2)[Formula: see text

Kepler-432 b: a massive planet in a highly eccentric orbit transiting a red giant

NASA Astrophysics Data System (ADS)

Ciceri, S.; Lillo-Box, J.; Southworth, J.; Mancini, L.; Henning, Th.; Barrado, D.

2015-01-01

We report the first disclosure of the planetary nature of Kepler-432 b (aka Kepler object of interest KOI-1299.01). We accurately constrained its mass and eccentricity by high-precision radial velocity measurements obtained with the CAFE spectrograph at the CAHA 2.2-m telescope. By simultaneously fitting these new data and Kepler photometry, we found that Kepler-432 b is a dense transiting exoplanet with a mass of Mp = 4.87 ± 0.48MJup and radius of Rp = 1.120 ± 0.036RJup. The planet revolves every 52.5 d around a K giant star that ascends the red giant branch, and it moves on a highly eccentric orbit with e = 0.535 ± 0.030. By analysing two near-IR high-resolution images, we found that a star is located at 1.1'' from Kepler-432, but it is too faint to cause significant effects on the transit depth. Together with Kepler-56 and Kepler-91, Kepler-432 occupies an almost-desert region of parameter space, which is important for constraining the evolutionary processes of planetary systems. RV data (Table A.1) are only available at the CDS via anonymous ftp to http://cdsarc.u-strasbg.fr (ftp://130.79.128.5) or via http://cdsarc.u-strasbg.fr/viz-bin/qcat?J/A+A/573/L5

Transiting Planet Search in the Kepler Pipeline

NASA Technical Reports Server (NTRS)

Jenkins, Jon M.; Chandrasekaran, Hema; McCauliff, Sean D.; Caldwell, Douglas A.; Tenebaum, Peter; Li, Jie; Klaus, Todd C.; Cote, Mile T.; Middour, Christopher

2010-01-01

The Kepler Mission simultaneously measures the brightness of more than 160,000 stars every 29.4 minutes over a 3.5-year mission to search for transiting planets. Detecting transits is a signal-detection problem where the signal of interest is a periodic pulse train and the predominant noise source is non-white, non-stationary (1/f) type process of stellar variability. Many stars also exhibit coherent or quasi-coherent oscillations. The detection algorithm first identifies and removes strong oscillations followed by an adaptive, wavelet-based matched filter. We discuss how we obtain super-resolution detection statistics and the effectiveness of the algorithm for Kepler flight data.

A Search for Lost Planets in the Kepler Multi-Planet Systems and the Discovery of the Long-Period, Neptune-Sized Exoplanet Kepler-150 f

NASA Technical Reports Server (NTRS)

Schmitt, Joseph R.; Jenkins, Jon M.; Fischer, Debra A.

2017-01-01

The vast majority of the 4700 confirmed planets and planet candidates discovered by the Kepler space telescope were first found by the Kepler pipeline. In the pipeline, after a transit signal is found, all data points associated with those transits are removed, creating a Swiss cheese-like light curve full of holes, which is then used for subsequent transit searches. These holes could render an additional planet undetectable (or lost). We examine a sample of 114 stars with 3+ confirmed planets to see the effect that this Swiss cheesing may have. A simulation determined that the probability that a transiting planet is lost due to the transit masking is low, but non-neglible, reaching a plateau at approximately 3.3% lost in the period range of P = 400 - 500 days. We then model the transits in all quarters of each star and subtract out the transit signals, restoring the in-transit data points, and use the Kepler pipeline to search the transit-subtracted (i.e., transit-cleaned) light curves. However, the pipeline did not discover any credible new transit signals. This demonstrates the validity and robustness of the Kepler pipelines choice to use transit masking over transit subtraction. However, a follow-up visual search through all the transit-subtracted data, which allows for easier visual identification of new transits, revealed the existence of a new, Neptune-sized exoplanet. Kepler-150 f (P = 637.2 days, RP = 3.86 R earth) is confirmed using a combination of false positive probability analysis, transit duration analysis, and the planet multiplicity argument.

A SEARCH FOR LOST PLANETS IN THE KEPLER MULTI-PLANET SYSTEMS AND THE DISCOVERY OF A LONG PERIOD, NEPTUNE-SIZED EXOPLANET KEPLER-150 F.

PubMed

Schmitt, Joseph R; Jenkins, Jon M; Fischer, Debra A

2017-04-01

The vast majority of the 4700 confirmed planets and planet candidates discovered by the Kepler space telescope were first found by the Kepler pipeline. In the pipeline, after a transit signal is found, all data points associated with those transits are removed, creating a "Swiss cheese"-like light curve full of holes, which is then used for subsequent transit searches. These holes could render an additional planet undetectable (or "lost"). We examine a sample of 114 stars with 3+ confirmed planets to see the effect that this "Swiss cheesing" may have. A simulation determined that the probability that a transiting planet is lost due to the transit masking is low, but non-neglible, reaching a plateau at ~3.3% lost in the period range of P = 400 - 500 days. We then model the transits in all quarters of each star and subtract out the transit signals, restoring the in-transit data points, and use the Kepler pipeline to search the transit-subtracted (i.e., transit-cleaned) light curves. However, the pipeline did not discover any credible new transit signals. This demonstrates the validity and robustness of the Kepler pipeline's choice to use transit masking over transit subtraction. However, a follow-up visual search through all the transit-subtracted data, which allows for easier visual identification of new transits, revealed the existence of a new, Neptune-sized exoplanet. Kepler-150 f ( P = 637.2 days, R P = 3.86 R ⊕ ) is confirmed using a combination of false positive probability analysis, transit duration analysis, and the planet multiplicity argument.

A SEARCH FOR LOST PLANETS IN THE KEPLER MULTI-PLANET SYSTEMS AND THE DISCOVERY OF A LONG PERIOD, NEPTUNE-SIZED EXOPLANET KEPLER-150 F

PubMed Central

Schmitt, Joseph R.; Jenkins, Jon M.; Fischer, Debra A.

2018-01-01

The vast majority of the 4700 confirmed planets and planet candidates discovered by the Kepler space telescope were first found by the Kepler pipeline. In the pipeline, after a transit signal is found, all data points associated with those transits are removed, creating a “Swiss cheese”-like light curve full of holes, which is then used for subsequent transit searches. These holes could render an additional planet undetectable (or “lost”). We examine a sample of 114 stars with 3+ confirmed planets to see the effect that this “Swiss cheesing” may have. A simulation determined that the probability that a transiting planet is lost due to the transit masking is low, but non-neglible, reaching a plateau at ~3.3% lost in the period range of P = 400 – 500 days. We then model the transits in all quarters of each star and subtract out the transit signals, restoring the in-transit data points, and use the Kepler pipeline to search the transit-subtracted (i.e., transit-cleaned) light curves. However, the pipeline did not discover any credible new transit signals. This demonstrates the validity and robustness of the Kepler pipeline’s choice to use transit masking over transit subtraction. However, a follow-up visual search through all the transit-subtracted data, which allows for easier visual identification of new transits, revealed the existence of a new, Neptune-sized exoplanet. Kepler-150 f (P = 637.2 days, RP = 3.86 R⊕) is confirmed using a combination of false positive probability analysis, transit duration analysis, and the planet multiplicity argument. PMID:29375142

Johannes Kepler - And the New Astronomy

NASA Astrophysics Data System (ADS)

Voelkel, James R.

1999-11-01

Johannes Kepler (1571-1630) is remembered as one of the greatest medieval astronomers in the tradition of Copernicus and Galileo, a man who made major contributions to physics, astronomy, and mathematics. Born in Germany and trained as a theologian, Kepler did not hesitate to challenge church doctrine by supporting the iconoclastic theory of a Sun-centered solar system. As Imperial Mathematician to the Holy Roman Emperor, he conducted careful observations of the night sky, which led to his discovery of the three Laws of Planetary Motion and the orbit of Mars. He also devised the Rudolphine Tables on planetary movements, and made key improvements to the telescope. Voelkel vividly describes the scientific achievements, providing enough background in physics and trigonometry so even beginners can enjoy this book. The author also gives us a captivating account of Kepler's tumultuous life, plagued by misery, disease, and fervent religious prosecution by the Catholic Church.Oxford Portraits in Science is an ongoing series of scientific biographies for young adults. Written by top scholars and writers, each biography examines the personality of its subject as well as the thought process leading to his or her discoveries. These illustrated biographies combine accessible technical information with compelling personal stories to portray the scientists whose work has shaped our understanding of the natural world.

Accurate parameters of the oldest known rocky-exoplanet hosting system: Kepler-10 revisited

DOE Office of Scientific and Technical Information (OSTI.GOV)

Fogtmann-Schulz, Alexandra; Hinrup, Brian; Van Eylen, Vincent

2014-02-01

Since the discovery of Kepler-10, the system has received considerable interest because it contains a small, rocky planet which orbits the star in less than a day. The system's parameters, announced by the Kepler team and subsequently used in further research, were based on only five months of data. We have reanalyzed this system using the full span of 29 months of Kepler photometric data, and obtained improved information about its star and the planets. A detailed asteroseismic analysis of the extended time series provides a significant improvement on the stellar parameters: not only can we state that Kepler-10 ismore » the oldest known rocky-planet-harboring system at 10.41 ± 1.36 Gyr, but these parameters combined with improved planetary parameters from new transit fits gives us the radius of Kepler-10b to within just 125 km. A new analysis of the full planetary phase curve leads to new estimates on the planetary temperature and albedo, which remain degenerate in the Kepler band. Our modeling suggests that the flux level during the occultation is slightly lower than at the transit wings, which would imply that the nightside of this planet has a non-negligible temperature.« less

Kepler Mission Discovers Trove of Extrasolar Planet Candidates

NASA Astrophysics Data System (ADS)

Showstack, Randy

2011-02-01

NASA's Kepler discovery mission is collecting more than just pennies from heaven. Results from the first 4 months of science operations of the Kepler space telescope, announced on 2 February, include the discovery of 1235 candidate planets orbiting 997 stars in a small portion of the Milky Way galaxy examined by the telescope. Follow-up observations likely could confirm about 80% of the candidates as actual planets rather than false positives, according to researchers. This new trove of possible exoplanets could greatly expand the number of known planets outside of our solar system.

A PSF photometry tool for NASA's Kepler, K2, and TESS missions

NASA Astrophysics Data System (ADS)

Cardoso, Jose Vinicius De Miranda; Barentsen, Geert; Hedges, Christina L.; Gully-Santiago, Michael A.; Cody, Ann Marie; Montet, Ben

2018-01-01

NASA's Kepler and K2 missions have impacted all areas of astrophysics in unique and important ways by delivering high-precision time series data on asteroids, stars, and galaxies. For example, both the official Kepler pipeline and the various community-owned pipelines have been successful at discovering a myriad of transiting exoplanets around a wide range of stellar types. However, the existing pipelines tend to focus on studying isolated stars using simple aperture photometry, and often perform sub-optimally in crowded fields where objects are blended. To address this issue, we present a Point Spread Function (PSF) photometry toolkit for Kepler and K2 which is able to extract light curves from crowded regions, such as the Beehive Cluster, the Lagoon Nebula, and the M67 globular cluster, which were all recently observed by Kepler. We present a detailed discussion on the theory, the practical use, and demonstrate our tool on various levels of crowding. Finally, we discuss the future use of the tool on data from the TESS mission. The code is open source and available on GitHub as part of the PyKE toolkit for Kepler/K2 data analysis.

The EB Factory: Fundamental Stellar Astrophysics with Eclipsing Binary Stars Discovered by Kepler

NASA Astrophysics Data System (ADS)

Stassun, Keivan

Eclipsing binaries (EBs) are key laboratories for determining the fundamental properties of stars. EBs are therefore foundational objects for constraining stellar evolution models, which in turn are central to determinations of stellar mass functions, of exoplanet properties, and many other areas. The primary goal of this proposal is to mine the Kepler mission light curves for: (1) EBs that include a subgiant star, from which precise ages can be derived and which can thus serve as critically needed age benchmarks; and within these, (2) long-period EBs that include low-mass M stars or brown dwarfs, which are increa-singly becoming the focus of exoplanet searches, but for which there are the fewest available fundamental mass- radius-age benchmarks. A secondary goal of this proposal is to develop an end-to-end computational pipeline -- the Kepler EB Factory -- that allows automatic processing of Kepler light curves for EBs, from period finding, to object classification, to determination of EB physical properties for the most scientifically interesting EBs, and finally to accurate modeling of these EBs for detailed tests and benchmarking of theoretical stellar evolution models. We will integrate the most successful algorithms into a single, cohesive workflow environment, and apply this 'Kepler EB Factory' to the full public Kepler dataset to find and characterize new "benchmark grade" EBs, and will disseminate both the enhanced data products from this pipeline and the pipeline itself to the broader NASA science community. The proposed work responds directly to two of the defined Research Areas of the NASA Astrophysics Data Analysis Program (ADAP), specifically Research Area #2 (Stellar Astrophysics) and Research Area #9 (Astrophysical Databases). To be clear, our primary goal is the fundamental stellar astrophysics that will be enabled by the discovery and analysis of relatively rare, benchmark-grade EBs in the Kepler dataset. At the same time, to enable this goal will

The Kepler and K2 Near-Infrared Transit Survey (KNITS)

NASA Astrophysics Data System (ADS)

Colon, Knicole; Rodriguez, Joseph E.; Barentsen, Geert; Cardoso, Jose Vinicius de Miranda; Vanderburg, Andrew

2018-01-01

NASA's Kepler mission discovered a plethora of transiting exoplanets after observing a single region of the Galaxy for four years. After a second reaction wheel failed, NASA's Kepler spacecraft was repurposed as K2 to observe different fields along the ecliptic in ~80 day campaigns. To date, K2 has discovered ~130 exoplanets along with another ~400 candidates. The exoplanets that have been confirmed or validated from Kepler and K2 have been primarily subject to spectroscopic observations, high-resolution imaging, or statistical methods. However, most of these, along with all the remaining candidate exoplanets, have had no follow-up transit photometry. In addition, recent studies have shown that for single-planet systems, statistical validation alone can be unreliable and additional follow-up observations are required to reveal the true nature of the system. I will present the latest results from an ongoing program to use the 3.5-meter WIYN telescope at Kitt Peak National Observatory for near-infrared transit photometry of Kepler and K2 exoplanets and candidates. Our program of high-precision, high-cadence, high-spatial-resolution near-infrared transit photometry is providing new measurements of the transit ephemerides and planetary radii as well as weeding out false positives lurking within the candidate lists. To date, 25 K2 and 5 Kepler targets have been observed with WIYN. I will also describe upcoming observations with WIYN that will take place in January 2018 as part of a campaign to observe exoplanet transits in the near-infrared simultaneously with the Kepler spacecraft during K2 Campaign 16. Our program ultimately provides a vetted sample of exoplanets that could be targeted in the future by NASA’s James Webb Space Telescope (JWST) and also demonstrates WIYN’s capabilities for observations of exoplanets to be discovered by NASA's all-sky Transiting Exoplanet Survey Satellite (TESS).Data presented herein were obtained at the WIYN Observatory from

Flare Activity of Wide Binary Stars with Kepler

NASA Astrophysics Data System (ADS)

Clarke, Riley W.; Davenport, James R. A.; Covey, Kevin R.; Baranec, Christoph

2018-01-01

We present an analysis of flare activity in wide binary stars using a combination of value-added data sets from the NASA Kepler mission. The target list contains a set of previously discovered wide binary star systems identified by proper motions in the Kepler field. We cross-matched these systems with estimates of flare activity for ∼200,000 stars in the Kepler field, allowing us to compare relative flare luminosity between stars in coeval binaries. From a sample of 184 previously known wide binaries in the Kepler field, we find 58 with detectable flare activity in at least 1 component, 33 of which are similar in mass (q > 0.8). Of these 33 equal-mass binaries, the majority display similar (±1 dex) flare luminosity between both stars, as expected for stars of equal mass and age. However, we find two equal-mass pairs where the secondary (lower mass) star is more active than its counterpart, and two equal-mass pairs where the primary star is more active. The stellar rotation periods are also anomalously fast for stars with elevated flare activity. Pairs with discrepant rotation and activity qualitatively seem to have lower mass ratios. These outliers may be due to tidal spin-up, indicating these wide binaries could be hierarchical triple systems. We additionally present high-resolution adaptive optics images for two wide binary systems to test this hypothesis. The demographics of stellar rotation and magnetic activity between stars in wide binaries may be useful indicators for discerning the formation scenarios of these systems.

LANDSAT: Non-US standard catalog. [LANDSAT imagery for August 1977

NASA Technical Reports Server (NTRS)

1977-01-01

The non-U. S. Standard Catalog lists non-U. S. imagery acquired by LANDSAT 1 and 2 which has been processed and input to the data files during the referenced month. Data, such as date acquired, cloud cover and image quality are given for each scene. The microfilm roll and frame on which the scene may be found is also given.

Kepler’s DR25 Most Earth-like Planet Candidates: What To Know Before You Go

NASA Astrophysics Data System (ADS)

Thompson, Susan E.; Kepler Team

2018-01-01

The Kepler mission’s latest catalog of planet candidates (data release 25 KOI catalog at the NASA exoplanet archive) was released in June of 2017. The catalog contains 4034 candidates including a significant population of terrestrial-size planets in the habitable zone of FGK dwarf stars. I will highlight what we know about these planet candidates in the DR25 catalog and discuss some of the caveats when working with these detections. Specifically, I will discuss how the noise in the Kepler light curves (from both the instrument and the stars) is known to occasionally produce weak, transit-like signals. We use simulations of this noise to measure how often these signals sneak into the catalog. I will also demonstrate ways to select a high-reliability sample using information available in the catalog. Such considerations may prove useful for anyone planning to use these planet candidates for occurrence rate calculations, choosing targets for follow-up, or deciding which planet to visit on his/her next holiday.

The KMTNet/K2-C9 (Kepler) Data Release

NASA Astrophysics Data System (ADS)

Kim, H.-W.; Hwang, K.-H.; Kim, D.-J.; Albrow, M. D.; Cha, S.-M.; Chung, S.-J.; Gould, A.; Han, C.; Jung, Y. K.; Kim, S.-L.; Lee, C.-U.; Lee, D.-J.; Lee, Y.; Park, B.-G.; Pogge, R. W.; Ryu, Y.-H.; Shin, I.-G.; Shvartzvald, Y.; Yee, J. C.; Zang, W.; Zhu, W.; KMTNet Collaboration

2018-05-01

We present Korea Microlensing Telescope Network (KMTNet) light curves for microlensing-event candidates in the Kepler K2 C9 field having peaks within three effective timescales of the Kepler observations. These include 181 “clear microlensing” and 84 “possible microlensing” events found by the KMTNet event finder, plus 56 other events found by OGLE and/or MOA that were not found by KMTNet. All data for the first two classes are immediately available for public use without restriction.

KIC2569073, A second Cepheid in the Kepler FOV

NASA Astrophysics Data System (ADS)

Drury, Jason A.; Kuehn, Charles A.; Bellamy, Beau R.; Stello, Dennis; Bedding, Timothy R.

2015-09-01

One particularly interesting new variable discovered via Kepler's 200x200 pixel superstamp images is KIC2569073. With a period of 14.66 days and 0.04mag variability it is only the second Cepheid in the Kepler field, or a rotationally modulated variable. We discuss its classification as a Type II W Virginis Class Cepheid, and present the cycle-to-cycle period variations of this star, as well as the first direct observations of granulation noise within a Cepheid.

Rotational Synchronization May Enhance Habitability for Circumbinary Planets: Kepler Binary Case Studies

NASA Astrophysics Data System (ADS)

Mason, Paul A.; Zuluaga, Jorge I.; Clark, Joni M.; Cuartas-Restrepo, Pablo A.

2013-09-01

We report a mechanism capable of reducing (or increasing) stellar activity in binary stars, thereby potentially enhancing (or destroying) circumbinary habitability. In single stars, stellar aggression toward planetary atmospheres causes mass-loss, which is especially detrimental for late-type stars, because habitable zones are very close and activity is long lasting. In binaries, tidal rotational breaking reduces magnetic activity, thus reducing harmful levels of X-ray and ultraviolet (XUV) radiation and stellar mass-loss that are able to erode planetary atmospheres. We study this mechanism for all confirmed circumbinary (p-type) planets. We find that main sequence twins provide minimal flux variation and in some cases improved environments if the stars rotationally synchronize within the first Gyr. Solar-like twins, like Kepler 34 and Kepler 35, provide low habitable zone XUV fluxes and stellar wind pressures. These wide, moist, habitable zones may potentially support multiple habitable planets. Solar-type stars with lower mass companions, like Kepler 47, allow for protected planets over a wide range of secondary masses and binary periods. Kepler 38 and related binaries are marginal cases. Kepler 64 and analogs have dramatically reduced stellar aggression due to synchronization of the primary, but are limited by the short lifetime. Kepler 16 appears to be inhospitable to planets due to extreme XUV flux. These results have important implications for estimates of the number of stellar systems containing habitable planets in the Galaxy and allow for the selection of binaries suitable for follow-up searches for habitable planets.

ROTATIONAL SYNCHRONIZATION MAY ENHANCE HABITABILITY FOR CIRCUMBINARY PLANETS: KEPLER BINARY CASE STUDIES

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mason, Paul A.; Zuluaga, Jorge I.; Cuartas-Restrepo, Pablo A.

2013-09-10

We report a mechanism capable of reducing (or increasing) stellar activity in binary stars, thereby potentially enhancing (or destroying) circumbinary habitability. In single stars, stellar aggression toward planetary atmospheres causes mass-loss, which is especially detrimental for late-type stars, because habitable zones are very close and activity is long lasting. In binaries, tidal rotational breaking reduces magnetic activity, thus reducing harmful levels of X-ray and ultraviolet (XUV) radiation and stellar mass-loss that are able to erode planetary atmospheres. We study this mechanism for all confirmed circumbinary (p-type) planets. We find that main sequence twins provide minimal flux variation and in somemore » cases improved environments if the stars rotationally synchronize within the first Gyr. Solar-like twins, like Kepler 34 and Kepler 35, provide low habitable zone XUV fluxes and stellar wind pressures. These wide, moist, habitable zones may potentially support multiple habitable planets. Solar-type stars with lower mass companions, like Kepler 47, allow for protected planets over a wide range of secondary masses and binary periods. Kepler 38 and related binaries are marginal cases. Kepler 64 and analogs have dramatically reduced stellar aggression due to synchronization of the primary, but are limited by the short lifetime. Kepler 16 appears to be inhospitable to planets due to extreme XUV flux. These results have important implications for estimates of the number of stellar systems containing habitable planets in the Galaxy and allow for the selection of binaries suitable for follow-up searches for habitable planets.« less

Transit Recovery of Kepler-167e: Providing JWST with an Unprecedented Jupiter-analog Exoplanet Target

NASA Astrophysics Data System (ADS)

Dalba, Paul; Muirhead, Philip; Tamburo, Patrick

2018-05-01

The Kepler Mission has uncovered a handful of long-period transiting exoplanets that orbit in the cold outer reaches of their systems, despite their low transit probabilities. Recent work suggests that cold gas giant exoplanet atmospheres are amenable to transmission spectroscopy (the analysis of the transit depth versus wavelength) enabling novel tests of planetary formation and evolution theories. Of particular scientific interest is Kepler-167e, a low-eccentricity Jupiter-analog exoplanet with a 1,071-day orbital period residing well beyond the snow-line. Transmission spectroscopy of Kepler-167e from JWST can reveal the composition of this planet's atmosphere, constrain its heavy-element abundance, and identify atmospheric photochemical processes. JWST characterization also enables unprecedented direct comparison with Jupiter and Saturn, which show a striking diversity in physical properties that is best investigated through comparative exoplanetology. Since Kepler only observed two transits of Kepler-167e, it is not known if this exoplanet exhibits transit timing variations (TTVs). About half of Kepler's long-period exoplanets have TTVs of up to 40 hours. Such a large uncertainty jeopardizes attempts to characterize the atmosphere of this unique Jovian exoplanet with JWST. To mitigate this risk, the upcoming third transit of Kepler-167e must be observed to test for TTVs. We propose a simple 10-hour, single-channel observation to capture ingress or egress of the next transit of Kepler-167e in December 2018. In the absence of TTVs, our observation will reduce the ephemeris uncertainty from an unknown value to approximately 3 minutes, thereby removing the risk in future transit observations with JWST. The excellent photometric precision of Spitzer is sufficient to identify the transit of Kepler-167e. Given the timing and nature of this program, Spitzer is the only observatory--on the ground or in space--that can make this pivotal observation.

Photometric analysis in the Kepler Science Operations Center pipeline

NASA Astrophysics Data System (ADS)

Twicken, Joseph D.; Clarke, Bruce D.; Bryson, Stephen T.; Tenenbaum, Peter; Wu, Hayley; Jenkins, Jon M.; Girouard, Forrest; Klaus, Todd C.

2010-07-01

We describe the Photometric Analysis (PA) software component and its context in the Kepler Science Operations Center (SOC) Science Processing Pipeline. The primary tasks of this module are to compute the photometric flux and photocenters (centroids) for over 160,000 long cadence (~thirty minute) and 512 short cadence (~one minute) stellar targets from the calibrated pixels in their respective apertures. We discuss science algorithms for long and short cadence PA: cosmic ray cleaning; background estimation and removal; aperture photometry; and flux-weighted centroiding. We discuss the end-to-end propagation of uncertainties for the science algorithms. Finally, we present examples of photometric apertures, raw flux light curves, and centroid time series from Kepler flight data. PA light curves, centroid time series, and barycentric timestamp corrections are exported to the Multi-mission Archive at Space Telescope [Science Institute] (MAST) and are made available to the general public in accordance with the NASA/Kepler data release policy.

Photometric Analysis in the Kepler Science Operations Center Pipeline

NASA Technical Reports Server (NTRS)

Twicken, Joseph D.; Clarke, Bruce D.; Bryson, Stephen T.; Tenenbaum, Peter; Wu, Hayley; Jenkins, Jon M.; Girouard, Forrest; Klaus, Todd C.

2010-01-01

We describe the Photometric Analysis (PA) software component and its context in the Kepler Science Operations Center (SOC) pipeline. The primary tasks of this module are to compute the photometric flux and photocenters (centroids) for over 160,000 long cadence (thirty minute) and 512 short cadence (one minute) stellar targets from the calibrated pixels in their respective apertures. We discuss the science algorithms for long and short cadence PA: cosmic ray cleaning; background estimation and removal; aperture photometry; and flux-weighted centroiding. We discuss the end-to-end propagation of uncertainties for the science algorithms. Finally, we present examples of photometric apertures, raw flux light curves, and centroid time series from Kepler flight data. PA light curves, centroid time series, and barycentric timestamp corrections are exported to the Multi-mission Archive at Space Telescope [Science Institute] (MAST) and are made available to the general public in accordance with the NASA/Kepler data release policy.

Automation and Cataloging.

ERIC Educational Resources Information Center

Furuta, Kenneth; And Others

1990-01-01

These three articles address issues in library cataloging that are affected by automation: (1) the impact of automation and bibliographic utilities on professional catalogers; (2) the effect of the LASS microcomputer software on the cost of authority work in cataloging at the University of Arizona; and (3) online subject heading and classification…

Which of Kepler's Stars Flare?

NASA Astrophysics Data System (ADS)

Kohler, Susanna

2017-12-01

The habitability of distant exoplanets is dependent upon many factors one of which is the activity of their host stars. To learn about which stars are most likely to flare, a recent study examines tens of thousands of stellar flares observed by Kepler.Need for a Broader SampleArtists rendering of a flaring dwarf star. [NASAs Goddard Space Flight Center/S. Wiessinger]Most of our understanding of what causes a star to flare is based on observations of the only star near enough to examine in detail the Sun. But in learning from a sample size of one, a challenge arises: we must determine which conclusions are unique to the Sun (or Sun-like stars), and which apply to other stellar types as well.Based on observations and modeling, astronomers think that stellar flares result from the reconnection of magnetic field lines in a stars outer atmosphere, the corona. The magnetic activity is thought to be driven by a dynamo caused by motions in the stars convective zone.HR diagram of the Kepler stars, with flaring main-sequence (yellow), giant (red) and A-star (green) stars in the authors sample indicated. [Van Doorsselaere et al. 2017]To test whether these ideas are true generally, we need to understand what types of stars exhibit flares, and what stellar properties correlate with flaring activity. A team of scientists led by Tom Van Doorsselaere (KU Leuven, Belgium) has now used an enormous sample of flares observed by Kepler to explore these statistics.Intriguing TrendsVan Doorsselaere and collaborators used a new automated flare detection and characterization algorithm to search through the raw light curves from Quarter 15 of the Kepler mission, building a sample of 16,850 flares on 6,662 stars. They then used these to study the dependence of the flare occurrence rate, duration, energy, and amplitude on the stellar spectral type and rotation period.This large statistical study led the authors to several interesting conclusions, including:Flare star incidence rate as a a

Spots and activity of solar-type stars from Kepler observations

NASA Astrophysics Data System (ADS)

Savanov, I. S.; Dmitrienko, E. S.

2017-05-01

The spot coverages S for 2846 solar-type stars with effective temperatures from 5700 K to 5800 K and gravities from 4.4 to 4.5 have been measured. An analysis based on the MAST catalog, which presents photometric measurements obtained with the Kepler Space Telescope during Q9 is presented. The existence of two groups of solar-type stars, with S values between 0.001 and 0.007 and with S > 0.007, is inferred. The second group (active stars) contains 279 stars (about 10% of the total number of stars analyzed). The mean S parameter for the entire sample is 0.004, comparable to the mean spot coverage of the Sun. In general, the dependence of S on the rotation period for solar-type stars has characteristics similar to those found earlier for stars with exoplanets. For the vast majority of the stars in the sample, the activity is constant, and independent of age. The activity of the small number of active stars with S > 0.007 decreases with age. The age variations of the chromospheric activity index R'HK are compared to variations of the spot coverage S. The relations analyzed have common characteristic features. It is likely that both the spot activity level and the chromospheric activity level abruptly decrease for stars older than 4 billion yrs.

VizieR Online Data Catalog: Abundances of bright metal-poor stars (Schlaufman+, 2014)

NASA Astrophysics Data System (ADS)

Schlaufman, K. C.; Casey, A. R.

2016-11-01

As input to our sample selection, we use the APASS DR6 Catalog, the 2MASS All-Sky Point Source Catalog, and the AllWISE Source Catalog (Henden+ 2012JAVSO..40..430H; Skrutskie+ 2006AJ....131.1163S; Wright+ 2010AJ....140.1868W; Mainzer+ 2011ApJ...731...53M). We followed up our metal-poor star candidates with the Mayall 4m/Echelle, Gemini South/GMOS-S, and Magellan/MIKE telescopes and spectrographs. We observed 98 stars with the Mayall 4m/Echelle on 2013 June 25-27. We observed 90 stars with Gemini South/GMOS-S in service mode from 2014 March to July (R~3700). We observed 416 stars with Magellan/MIKE on 2014 June 21-23 and July 8-10 (R~41000 in the blue and R~35000 in the red). (3 data files).

Proposed Computer System for Library Catalog Maintenance. Part II: System Design.

ERIC Educational Resources Information Center

Stein (Theodore) Co., New York, NY.

The logic of the system presented in this report is divided into six parts for computer processing and manipulation. They are: (1) processing of Library of Congress copy, (2) editing of input into standard format, (3) processing of information into and out from the authority files, (4) creation of the catalog records, (5) production of the…

Update of membership and mean proper motion of open clusters from UCAC5 catalog

NASA Astrophysics Data System (ADS)

Dias, W. S.; Monteiro, H.; Assafin, M.

2018-06-01

We present mean proper motions and membership probabilities of individual stars for optically visible open clusters, which have been determined using data from the UCAC5 catalog. This follows our previous studies with the UCAC2 and UCAC4 catalogs, but now using improved proper motions in the GAIA reference frame. In the present study results were obtained for a sample of 1108 open clusters. For five clusters, this is the first determination of mean proper motion, and for the whole sample, we present results with a much larger number of identified astrometric member stars than on previous studies. It is the last update of our Open cluster Catalog based on proper motion data only. Future updates will count on astrometric, photometric and spectroscopic GAIA data as input for analyses.

Canonical Transformations of Kepler Trajectories

ERIC Educational Resources Information Center

Mostowski, Jan

2010-01-01

In this paper, canonical transformations generated by constants of motion in the case of the Kepler problem are discussed. It is shown that canonical transformations generated by angular momentum are rotations of the trajectory. Particular attention is paid to canonical transformations generated by the Runge-Lenz vector. It is shown that these…

Kepler-62 and the Solar System

NASA Image and Video Library

2013-04-18

This diagram compares the planets of the inner solar system to Kepler-62, a five-planet system about 1,200 light-years from Earth in the constellation Lyra. At seven billion years old, the star is somewhat older than the sun.

Kepler-444 Planetary System Artist Concept

NASA Image and Video Library

2015-01-28

The tightly packed system, named Kepler-444, is home to five small planets in very compact orbits. The planets were detected from the dimming that occurs when they transit the disk of their parent star, as shown in this artist conception.

Kepler's Use of Archetypes in his defence against Aristotelian Scepticism

NASA Astrophysics Data System (ADS)

Martens, Rhonda M.

In 1621, looking back over an impresive career, Johannes Kepler commented that "almost every book on astronomy which I have published since that time could be referred to one or another of the important chapters set out in this little book (the Mysterium Cosmographicum) and would contain either an illustration or a completion of it". Kepler viewed the Mysterium, his first book, as the genesis of hist later works; Here the author is focusing on the conceptual foundations it provided for his approach to physical astronomy and the Aristotelian dominant during his time. It turns out that despite Kepler's arowedly Platonic and Pythagorean sympathies, his physical astronomy comports with Aristotle's directives in the Posterior Analytics. Perhaps paradoxically, his arhetypal cosmology as expressed in the Mysterium enabled the merging Platonic and Aristotelian intuitions in his construction of the new astronomy.

Processing and Managing the Kepler Mission's Treasure Trove of Stellar and Exoplanet Data

NASA Technical Reports Server (NTRS)

Jenkins, Jon M.

2016-01-01

The Kepler telescope launched into orbit in March 2009, initiating NASAs first mission to discover Earth-size planets orbiting Sun-like stars. Kepler simultaneously collected data for 160,000 target stars at a time over its four-year mission, identifying over 4700 planet candidates, 2300 confirmed or validated planets, and over 2100 eclipsing binaries. While Kepler was designed to discover exoplanets, the long term, ultra- high photometric precision measurements it achieved made it a premier observational facility for stellar astrophysics, especially in the field of asteroseismology, and for variable stars, such as RR Lyraes. The Kepler Science Operations Center (SOC) was developed at NASA Ames Research Center to process the data acquired by Kepler from pixel-level calibrations all the way to identifying transiting planet signatures and subjecting them to a suite of diagnostic tests to establish or break confidence in their planetary nature. Detecting small, rocky planets transiting Sun-like stars presents a variety of daunting challenges, from achieving an unprecedented photometric precision of 20 parts per million (ppm) on 6.5-hour timescales, supporting the science operations, management, processing, and repeated reprocessing of the accumulating data stream. This paper describes how the design of the SOC meets these varied challenges, discusses the architecture of the SOC and how the SOC pipeline is operated and is run on the NAS Pleiades supercomputer, and summarizes the most important pipeline features addressing the multiple computational, image and signal processing challenges posed by Kepler.

Mechanization of Cataloging Procedures *

PubMed Central

Kilgour, Frederick G.

1965-01-01

The Columbia-Harvard-Yale Medical Libraries Computerization Project has put into operation its mechanized procedure for the production of catalog cards. Cards produced are in final form ready to be filed into a card catalog. Catalogers prepare copy on a worksheet from which punched cards are punched. An IBM 1401 computer processes the decklets of punched cards on magnetic tape to produce the expanded decklets of punched cards needed to print the various packs of catalog cards required to go into different catalogs. Next, the computer punches the expanded decklets of cards to operate an 870 Document Writer, which types out the catalog cards in final form. Cost of cards ready to file is 12.5 cents per card. Images PMID:14271110

New Catalog, Same Old User. Recommendations for Teaching the Online Catalog.

ERIC Educational Resources Information Center

Fahey, Barbara J.; Campbell, Douglas G.

This study focuses on the planning necessary to support library instruction for an online public access catalog in an academic library. The installation of an online catalog is viewed as an opportunity for librarians to teach effective use of the library catalog. The project report consists of a review of the literature pertaining to the…

Stability of the Kepler-11 system and its origin

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mahajan, Nikhil; Wu, Yanqin

2014-11-01

A significant fraction of Kepler systems are closely packed, largely coplanar, and circular. We study the stability of a six-planet system, Kepler-11, to gain insights on the dynamics and formation history of such systems. Using a technique called 'frequency maps' as fast indicators of long-term stability, we explore the stability of the Kepler-11 system by analyzing the neighborhood space around its orbital parameters. Frequency maps provide a visual representation of chaos and stability, and their dependence on orbital parameters. We find that the current system is stable, but lies within a few percent of several dynamically dangerous two-body mean-motion resonances.more » Planet eccentricities are restricted below a small value, ∼0.04, for long-term stability, but planet masses can be more than twice their reported values (thus allowing for the possibility of mass loss by past photoevaporation). Based on our frequency maps, we speculate on the origin of instability in closely packed systems. We then proceed to investigate how the system could have been assembled. The stability constraints on Kepler-11 (mainly eccentricity constraints) suggest that if the system were assembled in situ, a dissipation mechanism must have been at work to neutralize the eccentricity excitation. On the other hand, if migration was responsible for assembling the planets, there has to be little differential migration among the planets to avoid them either getting trapped into mean motion resonances, or crashing into each other.« less

KEPLER Mission: development and overview

NASA Astrophysics Data System (ADS)

Borucki, William J.

2016-03-01

The Kepler Mission is a space observatory launched in 2009 by NASA to monitor 170 000 stars over a period of four years to determine the frequency of Earth-size and larger planets in and near the habitable zone of Sun-like stars, the size and orbital distributions of these planets, and the types of stars they orbit. Kepler is the tenth in the series of NASA Discovery Program missions that are competitively-selected, PI-directed, medium-cost missions. The Mission concept and various instrument prototypes were developed at the Ames Research Center over a period of 18 years starting in 1983. The development of techniques to do the 10 ppm photometry required for Mission success took years of experimentation, several workshops, and the exploration of many ‘blind alleys’ before the construction of the flight instrument. Beginning in 1992 at the start of the NASA Discovery Program, the Kepler Mission concept was proposed five times before its acceptance for mission development in 2001. During that period, the concept evolved from a photometer in an L2 orbit that monitored 6000 stars in a 50 sq deg field-of-view (FOV) to one that was in a heliocentric orbit that simultaneously monitored 170 000 stars with a 105 sq deg FOV. Analysis of the data to date has detected over 4600 planetary candidates which include several hundred Earth-size planetary candidates, over a thousand confirmed planets, and Earth-size planets in the habitable zone (HZ). These discoveries provide the information required for estimates of the frequency of planets in our galaxy. The Mission results show that most stars have planets, many of these planets are similar in size to the Earth, and that systems with several planets are common. Although planets in the HZ are common, many are substantially larger than Earth.

KEPLER Mission: development and overview.

PubMed

Borucki, William J

2016-03-01

The Kepler Mission is a space observatory launched in 2009 by NASA to monitor 170,000 stars over a period of four years to determine the frequency of Earth-size and larger planets in and near the habitable zone of Sun-like stars, the size and orbital distributions of these planets, and the types of stars they orbit. Kepler is the tenth in the series of NASA Discovery Program missions that are competitively-selected, PI-directed, medium-cost missions. The Mission concept and various instrument prototypes were developed at the Ames Research Center over a period of 18 years starting in 1983. The development of techniques to do the 10 ppm photometry required for Mission success took years of experimentation, several workshops, and the exploration of many 'blind alleys' before the construction of the flight instrument. Beginning in 1992 at the start of the NASA Discovery Program, the Kepler Mission concept was proposed five times before its acceptance for mission development in 2001. During that period, the concept evolved from a photometer in an L2 orbit that monitored 6000 stars in a 50 sq deg field-of-view (FOV) to one that was in a heliocentric orbit that simultaneously monitored 170,000 stars with a 105 sq deg FOV. Analysis of the data to date has detected over 4600 planetary candidates which include several hundred Earth-size planetary candidates, over a thousand confirmed planets, and Earth-size planets in the habitable zone (HZ). These discoveries provide the information required for estimates of the frequency of planets in our galaxy. The Mission results show that most stars have planets, many of these planets are similar in size to the Earth, and that systems with several planets are common. Although planets in the HZ are common, many are substantially larger than Earth.

ATV 2 Johannes Kepler docked

NASA Image and Video Library

2011-02-24

ISS026-E-029294 (24 Feb. 2011) --- Backdropped by the blackness of space, the European Space Agency's "Johannes Kepler" Automated Transfer Vehicle-2 (ATV-2) docks to the aft end of the International Space Station's Zvezda Service Module. Docking of the two spacecraft occurred at 10:59 a.m. (EST) on Feb. 24, 2011.

The California- Kepler Survey. II. Precise Physical Properties of 2025 Kepler Planets and Their Host Stars

DOE Office of Scientific and Technical Information (OSTI.GOV)

Johnson, John Asher; Cargile, Phillip A.; Sinukoff, Evan

We present stellar and planetary properties for 1305 Kepler Objects of Interest hosting 2025 planet candidates observed as part of the California- Kepler Survey. We combine spectroscopic constraints, presented in Paper I, with stellar interior modeling to estimate stellar masses, radii, and ages. Stellar radii are typically constrained to 11%, compared to 40% when only photometric constraints are used. Stellar masses are constrained to 4%, and ages are constrained to 30%. We verify the integrity of the stellar parameters through comparisons with asteroseismic studies and Gaia parallaxes. We also recompute planetary radii for 2025 planet candidates. Because knowledge of planetarymore » radii is often limited by uncertainties in stellar size, we improve the uncertainties in planet radii from typically 42% to 12%. We also leverage improved knowledge of stellar effective temperature to recompute incident stellar fluxes for the planets, now precise to 21%, compared to a factor of two when derived from photometry.« less

Kepler Planetary Systems in Motion Artist Concept

NASA Image and Video Library

2012-01-26

This artist concept shows an overhead view of the orbital position of the planets in systems with multiple transiting planets discovered by NASA Kepler mission. All the colored planets have been verified.

Kepler-47: A Three-Planet Circumbinary System

NASA Astrophysics Data System (ADS)

Welsh, William; Orosz, Jerome; Quarles, Billy; Haghighipour, Nader

2015-12-01

Kepler-47 is the most interesting of the known circumbinary planets. In the discovery paper by Orosz et al. (2012) two planets were detected, with periods of 49.5 and 303 days around the 7.5-day binary. In addition, a single "orphan" transit of a possible third planet was noticed. Since then, five additional transits by this planet candidate have been uncovered, leading to the unambiguous confirmation of a third transiting planet in the system. The planet has a period of 187 days, and orbits in between the previously detected planets. It lies on the inner edge of the optimistic habitable zone, while its outer sibling falls within the conservative habitable zone. The orbit of this new planet is precessing, causing its transits to become significantly deeper over the span of the Kepler observations. Although the planets are not massive enough to measurably perturb the binary, they are sufficiently massive to interact with each other and cause mild transit timing variations (TTVs). This enables our photodynamical model to estimate their masses. We find that all three planets have very low-density and are on remarkably co-planar orbits: all 4 orbits (the binary and three planets) are within ~2 degrees of one another. Thus the Kepler-47 system puts interesting constraints on circumbinary planet formation and migration scenarios.

Devil in the Details: Investigating Astrophysical Phenomena with Kepler Light Curves

NASA Astrophysics Data System (ADS)

Jenkins, Jon Michael; SOC, Kepler; SO, Kepler; Kepler Science Team

2011-05-01

The light curves produced by the Kepler photometer are unprecedented in their photometric precision, completeness, and contiguity. Moreover, although Kepler was designed to detect 100 ppm changes in brightness corresponding to transits of Earth-size planets crossing Sun-size stars, the Kepler light curves preserve intrinsic intensity variations across a large dynamic range, including those of RR Lyrae stars, which can increase their brightness by more than a factor of two over a few hours. The large dynamic range and phenomenal photometric precision of Kepler promises to revolutionize the study of intrinsic stellar variability and a wide variety of variable stars on timescales from minutes to several years. In this paper, we describe the science pipeline processing that produces the uncorrected and the systematic error-corrected light curves, and give examples of residual instrumental artifacts that can be found in the data, such as those caused by thermal changes due to the position of the spacecraft with relation to the sun or heaters cycling on and off on various spacecraft components (which can change the shape of the telescope and alter its focus), as well as examples of processing artifacts that can occur. We also describe algorithms in development that promise to improve our ability to identify and remove instrumental signatures and further reduce the incidence of processing artifacts in the archival light curves, thereby increasing the usability of the corrected light curves for astrophysical investigations. Kepler was selected as the 10th mission of the Discovery Program. Funding for this mission is provided by the NASA Science Mission Directorate.

A Three-Body Simulation of Kepler-91: A Potential Trojan System

NASA Astrophysics Data System (ADS)

D'Angelo, Bryan Daniel

This paper presents a three-body simulation of Kepler-91 (KIC 8219268) using parameters generated by the EXONEST software package. EXONEST uses Bayesian model testing and Bayesian parameter estimation to model photometric variations and three-body motion. A close examination of the Kepler-91 light curve reveals what appears to be a third dimming event that occurs 60° out of phase with the primary transit of the conrmed planet Kepler-91b, which makes a Trojan planet in the L4 or L5 Lagrange point an enticing explanation. EXONEST is also used to model the radial velocity of Kepler-91 based on the three-body motion. The three-body analysis by EXONEST predicts a Jovian planet with mass 2:54 +/- 0:27MJ and radius 2:37 +/- 0:25RJ , and Trojan planet with mass 0:44 +/- 0:26MJ and radius 0:86 +/- 0:14R J that orbits an average of 60:39 +/- 3:74° out of phase with the Jovian, with a maximum separation angle of 68:4 +/- 43:74° and minimum separation angle of 52:33 +/- 3:74°. Both planets are predicted to have an inclination angle of 67:76 +/- 2:26° and eccentricity 0:073 +/- 0:004. The three-body motion predicts Kepler-91 to have a radial velocity semi-amplitude of 66:75 +/- 38:22 m/s and reduced mass times the sine of the inclination angle (mu sin i) of 0:732 +/- 0:385MJ.

LANDSAT 2 cumulative US standard catalog. [LANDSAT imagery for January 1976

NASA Technical Reports Server (NTRS)

1977-01-01

The U.S. Standard Catalog lists U.S. imagery acquired by LANDSAT 1 and LANDSAT 2 which has been processed and input to the data files during the referenced month. Data, such as date acquired, cloud cover and image quality, are given for each scene. The microfilm roll and frame on which the scene may be found is also given.

LANDSAT: US standard catalog, 1 January 1977 through 31 January 1977

NASA Technical Reports Server (NTRS)

1977-01-01

The U.S. Standard Catalog lists U.S. imagery acquired by LANDSAT 1 and LANDSAT 2 which has been processed and input to the data files during the referenced month. Data, such as date acquired, cloud cover and image quality are given for each scene. The microfilm roll and frame on which the scene may be found is also given.

VizieR Online Data Catalog: URAT Parallax Catalog (UPC) (Finch+, 2016)

NASA Astrophysics Data System (ADS)

Finch, C. T.; Zacharias, N.

2016-04-01

The URAT Parallax Catalog (UPC) consists of 112177 parallaxes. The catalog utilizes all Northern Hemisphere epoch data from the United States Naval Observatory (USNO) Robotic Astrometric Telescope (URAT). This data includes all individual exposures from April 2012 to June 2015 giving a larger epoch baseline for determining parallaxes over the 2-year span of the First USNO Robotic Astrometric Telescope Catalog (URAT1) (Zacharias et al., 2015, Cat. I/329) published data. The URAT parallax pipeline is custom code that utilizes routines from (Jao, C.-W., 2004, PhD thesis Georgia Stat), the JPL DE405 ephemeris and Green's parallax factor (Green, R.M., 1985, Spherical Astronomy) for determining parallaxes from a weighted least-squares reduction. The relative parallaxes have been corrected to absolute by using the distance color relation described in (Finch et. al, 2014, Cat. J/AJ/148/119) to determine a mean distance of all UCAC4 reference stars (R=8-16 mag) used in the astrometric reductions. Presented here are all significant parallaxes from the URAT Northern Hemisphere epoch data comprising of 2 groups: a) URAT parallax results for stars with prior published parallax, and b) first time trigonometric parallaxes as obtained from URAT data of stars without prior published parallax. Note, more stringent selection criteria have been applied to the second group than the first in order to keep the rate of false detections low. For specific information about the astrometric reductions please see 'The First U.S. Naval Observatory Robotic Astrometric Telescope Catalog' published paper (Zacharias et al., 2015AJ....150..101Z, Cat. I/329). For complete details regarding the parallax pipeline please see 'Parallax Results From URAT Epoch Data' (Finch and Zacharias, 2016, AJ, in press). This catalog gives all positions on the ICRS at Epoch J2014.0; it covers the magnitude range 6.56 to 16.93 in the URAT band-pass, with an average parallax precision of 4.3mas for stars having no known

Robotic laser adaptive optics imaging of 715 Kepler exoplanet candidates using Robo-AO

DOE Office of Scientific and Technical Information (OSTI.GOV)

Law, Nicholas M.; Ziegler, Carl; Morton, Tim

2014-08-10

The Robo-AO Kepler Planetary Candidate Survey is observing every Kepler planet candidate host star with laser adaptive optics imaging to search for blended nearby stars, which may be physically associated companions and/or responsible for transit false positives. In this paper, we present the results from the 2012 observing season, searching for stars close to 715 Kepler planet candidate hosts. We find 53 companions, 43 of which are new discoveries. We detail the Robo-AO survey data reduction methods including a method of using the large ensemble of target observations as mutual point-spread-function references, along with a new automated companion-detection algorithm designedmore » for large adaptive optics surveys. Our survey is sensitive to objects from ≈0.''15 to 2.''5 separation, with magnitude differences up to Δm ≈ 6. We measure an overall nearby-star probability for Kepler planet candidates of 7.4% ± 1.0%, and calculate the effects of each detected nearby star on the Kepler-measured planetary radius. We discuss several Kepler Objects of Interest (KOIs) of particular interest, including KOI-191 and KOI-1151, which are both multi-planet systems with detected stellar companions whose unusual planetary system architecture might be best explained if they are 'coincident multiple' systems, with several transiting planets shared between the two stars. Finally, we find 98% confidence evidence that short-period giant planets are two to three times more likely than longer-period planets to be found in wide stellar binaries.« less

Kepler-447b: a hot-Jupiter with an extremely grazing transit

NASA Astrophysics Data System (ADS)

Lillo-Box, J.; Barrado, D.; Santos, N. C.; Mancini, L.; Figueira, P.; Ciceri, S.; Henning, Th.

2015-05-01

We present the radial velocity confirmation of the extrasolar planet Kepler-447b, initially detected as a candidate by the Kepler mission. In this work, we analyzeits transit signal and the radial velocity data obtained with the Calar Alto Fiber-fed Echelle spectrograph (CAFE). By simultaneously modeling both datasets, we obtain the orbital and physical properties of the system. According to our results, Kepler-447b is a Jupiter-mass planet (Mp = 1.37+0.48-0.46 MJup), with an estimated radius of Rp = 1.65+0.59-0.56 RJup (uncertainties provided in this work are 3σ unless specified). This translates into a sub-Jupiter density. The planet revolves every ~7.8 days in a slightly eccentric orbit (e = 0.123+0.037-0.036) around a G8V star with detected activity in the Kepler light curve. Kepler-447b transits its host with a large impact parameter (b = 1.076+0.112-0.086), which is one of the few planetary grazing transits confirmed so far and the first in the Kepler large crop of exoplanets. We estimate that only around 20% of the projected planet disk occults the stellar disk. The relatively large uncertainties in the planet radius are due to the large impact parameter and short duration of the transit. Planetary transits with large impact parameters (and in particular grazing transits) can be used to detect and analyze interesting configurations, such as additional perturbing bodies, stellar pulsations, rotation of a non-spherical planet, or polar spot-crossing events. All these scenarios will periodically modify the transit properties (depth, duration, and time of mid-transit), which could be detectable with sufficiently accurate photometry. Short-cadence photometric data (at the 1-min level) would help in the search for these exotic configurations in grazing planetary transits like that of Kepler-447b. This system could then be an excellent target for the forthcoming missions TESS and CHEOPS, which will provide the required photometric precision and cadence to study

Kepler-1649b: An Exo-Venus in the Solar Neighborhood

DOE Office of Scientific and Technical Information (OSTI.GOV)

Angelo, Isabel; Rowe, Jason F.; Huber, Daniel

The Kepler mission has revealed that Earth-sized planets are common, and dozens have been discovered to orbit in or near their host star’s habitable zone. A major focus in astronomy is to determine which of these exoplanets are likely to have Earth-like properties that are amenable to follow-up with both ground- and future space-based surveys, with an ultimate goal of probing their atmospheres to look for signs of life. Venus-like atmospheres will be of particular interest in these surveys. While Earth and Venus evolved to have similar sizes and densities, it remains unclear what factors led to the dramatic divergencemore » of their atmospheres. Studying analogs to both Earth and Venus can thus shed light on the limits of habitability and the potential for life on known exoplanets. Here, we present the discovery and confirmation of Kepler-1649b, an Earth-sized planet orbiting a nearby M5V star that receives incident flux at a level similar to that of Venus. We present our methods for characterizing the star, using a combination of point-spread function photometry, ground-based spectroscopy, and imaging, to confirm the planetary nature of Kepler-1649b. Planets like Kepler-1649b will be prime candidates for atmospheric and habitability studies in the next generation of space missions.« less

VizieR Online Data Catalog: New white dwarf stars in SDSS DR10 (Kepler+, 2015)

NASA Astrophysics Data System (ADS)

Kepler, S. O.; Pelisoli, I.; Koester, D.; Ourique, G.; Kleinman, S. J.; Romero, A. D.; Nitta, A.; Eisenstein, D. J.; Costa, J. E. S.; Kulebi, B.; Jordan, S.; Dufour, P.; Giommi, P.; Rebassa-mansergas, A.

2015-07-01

The targeted white dwarfs were required to be point sources with clean photometry, and to have USNO-B Catalog counterparts (Monet et al.. 2003, Cat. I/284). They were also restricted to regions inside the DR7 imaging footprint and required to have colours within the ranges g<19.2, (u-r)<0.4, -1<(u-g)<0.3, -1<(g-r)<0.5 and to have low Galactic extinction Ar<0.5mag. Additionally, targets that did not have (u-r)<-0.1 and (g-r)<-0.1 were required to have USNO proper motions larger than 2 arcsec per century. Objects satisfying the selection criteria that had not been observed previously by the SDSS were denoted by the WHITEDWARF_NEW target flag, while those with prior SDSS spectra are assigned the WHITEDWARF_SDSS flag. Some of the latter were re-observed with BOSS in order to obtain the extended wavelength coverage that the BOSS spectrograph offers. (1 data file).

High Resolution Active Optics Observations from the Kepler Follow-up Observation Program

NASA Astrophysics Data System (ADS)

Gautier, Thomas N.; Ciardi, D. R.; Marcy, G. W.; Hirsch, L.

2014-01-01

The ground based follow-up observation program for candidate exoplanets discovered with the Kepler observatory has supported a major effort for high resolution imaging of candidate host stars using adaptive optics wave-front correction (AO), speckle imaging and lucky imaging. These images allow examination of the sky as close as a few tenths of an arcsecond from the host stars to detect background objects that might be the source of the Kepler transit signal instead of the host star. This poster reports on the imaging done with AO cameras on the Keck, Palomar 5m and Shane 3m (Lick Observatory) which have been used to obtain high resolution images of over 500 Kepler Object of Interest (KOI) exoplanet candidate host stars. All observations were made at near infrared wavelengths in the J, H and K bands, mostly using the host target star as the AO guide star. Details of the sensitivity to background objects actually attained by these observations and the number of background objects discovered are presented. Implications to the false positive rate of the Kepler candidates are discussed.

Secure Mass Measurements from Transit Timing: 10 Kepler Exoplanets between 3 and 8 M⊕ with Diverse Densities and Incident Fluxes

NASA Astrophysics Data System (ADS)

Jontof-Hutter, Daniel; Ford, Eric B.; Rowe, Jason F.; Lissauer, Jack J.; Fabrycky, Daniel C.; Van Laerhoven, Christa; Agol, Eric; Deck, Katherine M.; Holczer, Tomer; Mazeh, Tsevi

2016-03-01

We infer dynamical masses in eight multiplanet systems using transit times measured from Kepler's complete data set, including short-cadence data where available. Of the 18 dynamical masses that we infer, 10 pass multiple tests for robustness. These are in systems Kepler-26 (KOI-250), Kepler-29 (KOI-738), Kepler-60 (KOI-2086), Kepler-105 (KOI-115), and Kepler-307 (KOI-1576). Kepler-105 c has a radius of 1.3 R⊕ and a density consistent with an Earth-like composition. Strong transit timing variation (TTV) signals were detected from additional planets, but their inferred masses were sensitive to outliers or consistent solutions could not be found with independently measured transit times, including planets orbiting Kepler-49 (KOI-248), Kepler-57 (KOI-1270), Kepler-105 (KOI-115), and Kepler-177 (KOI-523). Nonetheless, strong upper limits on the mass of Kepler-177 c imply an extremely low density of ˜0.1 g cm-3. In most cases, individual orbital eccentricities were poorly constrained owing to degeneracies in TTV inversion. For five planet pairs in our sample, strong secular interactions imply a moderate to high likelihood of apsidal alignment over a wide range of possible eccentricities. We also find solutions for the three planets known to orbit Kepler-60 in a Laplace-like resonance chain. However, nonlibrating solutions also match the transit timing data. For six systems, we calculate more precise stellar parameters than previously known, enabling useful constraints on planetary densities where we have secure mass measurements. Placing these exoplanets on the mass-radius diagram, we find that a wide range of densities is observed among sub-Neptune-mass planets and that the range in observed densities is anticorrelated with incident flux.

Exoplanet orbital eccentricities derived from LAMOST-Kepler analysis

NASA Astrophysics Data System (ADS)

Xie, Ji-Wei; Dong, Subo; Zhu, Zhaohuan; Huber, Daniel; Zheng, Zheng; De Cat, Peter; Fu, Jianning; Liu, Hui-Gen; Luo, Ali; Wu, Yue; Zhang, Haotong; Zhang, Hui; Zhou, Ji-Lin; Cao, Zihuang; Hou, Yonghui; Wang, Yuefei; Zhang, Yong

2016-10-01

The nearly circular (mean eccentricity e¯≈0.06) and coplanar (mean mutual inclination i¯≈3°) orbits of the solar system planets motivated Kant and Laplace to hypothesize that planets are formed in disks, which has developed into the widely accepted theory of planet formation. The first several hundred extrasolar planets (mostly Jovian) discovered using the radial velocity (RV) technique are commonly on eccentric orbits (e¯≈0.3). This raises a fundamental question: Are the solar system and its formation special? The Kepler mission has found thousands of transiting planets dominated by sub-Neptunes, but most of their orbital eccentricities remain unknown. By using the precise spectroscopic host star parameters from the Large Sky Area Multi-Object Fiber Spectroscopic Telescope (LAMOST) observations, we measure the eccentricity distributions for a large (698) and homogeneous Kepler planet sample with transit duration statistics. Nearly half of the planets are in systems with single transiting planets (singles), whereas the other half are multiple transiting planets (multiples). We find an eccentricity dichotomy: on average, Kepler singles are on eccentric orbits with e¯≈0.3, whereas the multiples are on nearly circular (e¯=0.04-0.04+0.03) and coplanar (i¯=1.4-1.1+0.8 degree) orbits similar to those of the solar system planets. Our results are consistent with previous studies of smaller samples and individual systems. We also show that Kepler multiples and solar system objects follow a common relation [×i¯] between mean eccentricities and mutual inclinations. The prevalence of circular orbits and the common relation may imply that the solar system is not so atypical in the galaxy after all.

Exoplanet orbital eccentricities derived from LAMOST–Kepler analysis

PubMed Central

Xie, Ji-Wei; Dong, Subo; Zhu, Zhaohuan; Huber, Daniel; Zheng, Zheng; De Cat, Peter; Fu, Jianning; Liu, Hui-Gen; Luo, Ali; Wu, Yue; Zhang, Haotong; Zhang, Hui; Zhou, Ji-Lin; Cao, Zihuang; Hou, Yonghui; Wang, Yuefei; Zhang, Yong

2016-01-01

The nearly circular (mean eccentricity e¯≈0.06) and coplanar (mean mutual inclination i¯≈3°) orbits of the solar system planets motivated Kant and Laplace to hypothesize that planets are formed in disks, which has developed into the widely accepted theory of planet formation. The first several hundred extrasolar planets (mostly Jovian) discovered using the radial velocity (RV) technique are commonly on eccentric orbits (e¯≈0.3). This raises a fundamental question: Are the solar system and its formation special? The Kepler mission has found thousands of transiting planets dominated by sub-Neptunes, but most of their orbital eccentricities remain unknown. By using the precise spectroscopic host star parameters from the Large Sky Area Multi-Object Fiber Spectroscopic Telescope (LAMOST) observations, we measure the eccentricity distributions for a large (698) and homogeneous Kepler planet sample with transit duration statistics. Nearly half of the planets are in systems with single transiting planets (singles), whereas the other half are multiple transiting planets (multiples). We find an eccentricity dichotomy: on average, Kepler singles are on eccentric orbits with e¯≈ 0.3, whereas the multiples are on nearly circular (e¯=0.04−0.04+0.03) and coplanar (i¯=1.4−1.1+0.8 degree) orbits similar to those of the solar system planets. Our results are consistent with previous studies of smaller samples and individual systems. We also show that Kepler multiples and solar system objects follow a common relation [e¯≈(1–2)×i¯] between mean eccentricities and mutual inclinations. The prevalence of circular orbits and the common relation may imply that the solar system is not so atypical in the galaxy after all. PMID:27671635

Kepler Team Marks Five Years in Space

NASA Image and Video Library

2014-03-07

On March 6, 2009, NASA Kepler Space Telescope rocketed into the night skies above Cape Canaveral Air Force Station in Florida to find planets around other stars, called exoplanets, in search of potentially habitable worlds.

Hubble Observations of the Exomoon Candidate Kepler-1625b I

NASA Astrophysics Data System (ADS)

Teachey, Alexander; Kipping, David; Torres, Guillermo; Bakos, Gaspar A.; Nesvorný, David; Buchhave, Lars; Huang, Chelsea Xu; Hartman, Joel D.

2018-01-01

The exomoon candidate Kepler-1625b I was identified by the Hunt for Exomoons with Kepler (HEK) collaboration in August 2016 following an extensive program to characterize the occurrence rate of exomoons. Follow-up observations of the candidate for the purpose of validating the existence of the moon and constraining its properties were carried out on the Hubble Space Telescope on October 28th-29th 2017, using slitless spectroscopy on Wide Field Camera 3. We report preliminary results of that observation.

Chandra Source Catalog: User Interface

NASA Astrophysics Data System (ADS)

Bonaventura, Nina; Evans, Ian N.; Rots, Arnold H.; Tibbetts, Michael S.; van Stone, David W.; Zografou, Panagoula; Primini, Francis A.; Glotfelty, Kenny J.; Anderson, Craig S.; Chen, Judy C.; Davis, John E.; Doe, Stephen M.; Evans, Janet D.; Fabbiano, Giuseppina; Galle, Elizabeth C.; Gibbs, Danny G., II; Grier, John D.; Hain, Roger; Hall, Diane M.; Harbo, Peter N.; He, Helen; Houck, John C.; Karovska, Margarita; Kashyap, Vinay L.; Lauer, Jennifer; McCollough, Michael L.; McDowell, Jonathan C.; Miller, Joseph B.; Mitschang, Arik W.; Morgan, Douglas L.; Mossman, Amy E.; Nichols, Joy S.; Nowak, Michael A.; Plummer, David A.; Refsdal, Brian L.; Siemiginowska, Aneta L.; Sundheim, Beth A.; Winkelman, Sherry L.

2009-09-01

The Chandra Source Catalog (CSC) is intended to be the definitive catalog of all X-ray sources detected by Chandra. For each source, the CSC provides positions and multi-band fluxes, as well as derived spatial, spectral, and temporal source properties. Full-field and source region data products are also available, including images, photon event lists, light curves, and spectra. The Chandra X-ray Center CSC website (http://cxc.harvard.edu/csc/) is the place to visit for high-level descriptions of each source property and data product included in the catalog, along with other useful information, such as step-by-step catalog tutorials, answers to FAQs, and a thorough summary of the catalog statistical characterization. Eight categories of detailed catalog documents may be accessed from the navigation bar on most of the 50+ CSC pages; these categories are: About the Catalog, Creating the Catalog, Using the Catalog, Catalog Columns, Column Descriptions, Documents, Conferences, and Useful Links. There are also prominent links to CSCview, the CSC data access GUI, and related help documentation, as well as a tutorial for using the new CSC/Google Earth interface. Catalog source properties are presented in seven scientific categories, within two table views: the Master Source and Source Observations tables. Each X-ray source has one ``master source'' entry and one or more ``source observation'' entries, the details of which are documented on the CSC ``Catalog Columns'' pages. The master source properties represent the best estimates of the properties of a source; these are extensively described on the following pages of the website: Position and Position Errors, Source Flags, Source Extent and Errors, Source Fluxes, Source Significance, Spectral Properties, and Source Variability. The eight tutorials (``threads'') available on the website serve as a collective guide for accessing, understanding, and manipulating the source properties and data products provided by the catalog.

Adiabiatic invariants of the Kepler problem: an elementary treatment

NASA Astrophysics Data System (ADS)

Borghi, Riccardo

2013-09-01

An elementary introduction to the adiabatic invariants of the Kepler problem is proposed. Unlike the other didactical expositions already present in the literature, which are based on the Hamilton-Jacobi theory of mechanics, our derivation is suitable to be grasped even by first-year undergraduates. A central role in the present analysis is played by an elementary proof of the virial theorem for the Kepler problem which is based on the chain rule for derivatives. As a byproduct of our analysis, an interpretation of Keplerian orbit eccentricities in terms of the time average of the position vector direction is also provided.

VizieR Online Data Catalog: GUViCS. Ultraviolet Source Catalogs (Voyer+, 2014)

NASA Astrophysics Data System (ADS)

Voyer, E. N.; Boselli, A.; Boissier, S.; Heinis, S.; Cortese, L.; Ferrarese, L.; Cote, P.; Cuillandre, J.-C.; Gwyn, S. D. J.; Peng, E. W.; Zhang, H.; Liu, C.

2014-07-01

These catalogs are based on GALEX NUV and FUV source detections in and behind the Virgo Cluster. The detections are split into catalogs of extended sources and point-like sources. The UV Virgo Cluster Extended Source catalog (UV_VES.fit) provides the deepest and most extensive UV photometric data of extended galaxies in Virgo to date. If certain data is not available for a given source then a null value is entered (e.g. -999, -99). UV point-like sources are matched with SDSS, NGVS, and NED and the relevant photometry and further data from these databases/catalogs are provided in this compilation of catalogs. The primary GUViCS UV Virgo Cluster Point-Like Source catalog is UV_VPS.fit. This catalog provides the most useful GALEX pipeline NUV and FUV photometric parameters, and categorizes sources as stars, Virgo members, and background sources, when possible. It also provides identifiers for optical matches in the SDSS and NED, and indicates if a match exists in the NGVS, only if GUViCS-optical matches are one-to-one. NED spectroscopic redshifts are also listed for GUViCS-NED one-to-one matches. If certain data is not available for a given source a null value is entered. Additionally, the catalog is useful for quick access to optical data on one-to-one GUViCS-SDSS matches.The only parameter available in the catalog for UV sources that have multiple SDSS matches is the total number of multiple matches, i.e. SDSSNUMMTCHS. Multiple GUViCS sources matched to the same SDSS source are also flagged given a total number of matches, SDSSNUMMTCHS, of one. All other fields for multiple matches are set to a null value of -99. In order to obtain full optical SDSS data for multiply matched UV sources in both scenarios, the user can cross-correlate the GUViCS ID of the sources of interest with the full GUViCS-SDSS matched catalog in GUV_SDSS.fit. The GUViCS-SDSS matched catalog, GUV_SDSS.fit, provides the most relevant SDSS data on all GUViCS-SDSS matches, including one

LGS-AO Imaging of Every Kepler Planet Candidate: the Robo-AO KOI Survey

NASA Astrophysics Data System (ADS)

Baranec, Christoph; Law, Nicholas; Morton, Timothy; Ziegler, Carl; Nofi, Larissa; Atkinson, Dani; Riddle, Reed

2015-12-01

The Robo-AO Kepler Planetary Candidate Survey is observing every Kepler planet candidate host star with laser adaptive optics imaging, to search for blended nearby stars which may be physically associated companions and/or responsible for transit false positives. We will present the results from searching for companions around over 3,000 Kepler planet hosts in 2012-2015. We will describe our first data release covering 715 planet candidate hosts, and give a preview of ongoing results including improved statistics on the likelihood of false positive planet detections in the Kepler dataset, many new planets in multiple star systems, and new exotic multiple star systems containing Kepler planets. We will also describe the automated Robo-AO survey data reduction methods, including a method of using the large ensemble of target observations as mutual point-spread-function references, along with a new automated companion-detection algorithm designed for extremely large adaptive optics surveys. Our first data release covered 715 objects, searching for companions from 0.15” to 2.5” separation with contrast up to 6 magnitudes. We measured the overall nearby-star-probability for Kepler planet candidates to be 7.4+/-1.0%, and we will detail the variations in this number with stellar host parameters. We will also discuss plans to extend the survey to other transiting planet missions such as K2 and TESS as Robo-AO is in the process of being re-deployed to the 2.1-m telescope at Kitt Peak for 3 years and a higher-contrast Robo-AO system is being developed for the 2.2-m UH telescope on Maunakea.

Planet Hunters: New Kepler Planet Candidates from Analysis of Quarter 2

NASA Astrophysics Data System (ADS)

Lintott, Chris J.; Schwamb, Megan E.; Barclay, Thomas; Sharzer, Charlie; Fischer, Debra A.; Brewer, John; Giguere, Matthew; Lynn, Stuart; Parrish, Michael; Batalha, Natalie; Bryson, Steve; Jenkins, Jon; Ragozzine, Darin; Rowe, Jason F.; Schwainski, Kevin; Gagliano, Robert; Gilardi, Joe; Jek, Kian J.; Pääkkönen, Jari-Pekka; Smits, Tjapko

2013-06-01

We present new planet candidates identified in NASA Kepler Quarter 2 public release data by volunteers engaged in the Planet Hunters citizen science project. The two candidates presented here survive checks for false positives, including examination of the pixel offset to constrain the possibility of a background eclipsing binary. The orbital periods of the planet candidates are 97.46 days (KIC 4552729) and 284.03 (KIC 10005758) days and the modeled planet radii are 5.3 and 3.8 R ⊕. The latter star has an additional known planet candidate with a radius of 5.05 R ⊕ and a period of 134.49 days, which was detected by the Kepler pipeline. The discovery of these candidates illustrates the value of massively distributed volunteer review of the Kepler database to recover candidates which were otherwise uncataloged. .

Decal Process Document and Catalog

NASA Technical Reports Server (NTRS)

1999-01-01

The Decal Process Document and Catalog, JSC 27260 is the standard flight decal catalog, complete with illustrations and part numbers. As hardware developers identify labels that have common applicability across end items, these labels can be evaluated for "standard decal classification" and entered into the decal catalog for general use. The hardware developer must have a label design that meets current, applicable labeling requirements, and submit to the Decal Design and Production Facility (DDPF) as a standard label candidate. Upon approval, the label will be added to the decal catalog. The Decal Process Document and Catalog provides a selection of decals from which the NASA and NASA contractor customers can easily order. The decals shown in the catalog have been previously produced and have released engineering/fabrication drawings on file in the (DDPF). A released drawing is required before a decal can be produced or placed into the catalog. Some decals included in the catalog have a common applicability and are used in various NASA vehicles/habitats. It is the intent of the DDPF to maintain this catalog as a "living document" to which decals/placards can be added as they are repeatedly used. The advantage of identifYing flight decals in this catalog is that a released drawing is already in place, and the products will be flight certified.

NASA climate data catalog

NASA Technical Reports Server (NTRS)

Reph, M. G.

1984-01-01

This document provides a summary of information available in the NASA Climate Data Catalog. The catalog provides scientific users with technical information about selected climate parameter data sets and the associated sensor measurements from which they are derived. It is an integral part of the Pilot Climate Data System (PCDS), an interactive, scientific management system for locating, obtaining, manipulating, and displaying climate research data. The catalog is maintained in a machine readable representation which can easily be accessed via the PCDS. The purposes, format and content of the catalog are discussed. Summarized information is provided about each of the data sets currently described in the catalog. Sample detailed descriptions are included for individual data sets or families of related data sets.

Chandra Source Catalog: User Interfaces

NASA Astrophysics Data System (ADS)

Bonaventura, Nina; Evans, I. N.; Harbo, P. N.; Rots, A. H.; Tibbetts, M. S.; Van Stone, D. W.; Zografou, P.; Anderson, C. S.; Chen, J. C.; Davis, J. E.; Doe, S. M.; Evans, J. D.; Fabbiano, G.; Galle, E.; Gibbs, D. G.; Glotfelty, K. J.; Grier, J. D.; Hain, R.; Hall, D. M.; He, X.; Houck, J. C.; Karovska, M.; Lauer, J.; McCollough, M. L.; McDowell, J. C.; Miller, J. B.; Mitschang, A. W.; Morgan, D. L.; Nichols, J. S.; Nowak, M. A.; Plummer, D. A.; Primini, F. A.; Refsdal, B. L.; Siemiginowska, A. L.; Sundheim, B. A.; Winkelman, S. L.

2010-03-01

The CSCview data mining interface is available for browsing the Chandra Source Catalog (CSC) and downloading tables of quality-assured source properties and data products. Once the desired source properties and search criteria are entered into the CSCview query form, the resulting source matches are returned in a table along with the values of the requested source properties for each source. (The catalog can be searched on any source property, not just position.) At this point, the table of search results may be saved to a text file, and the available data products for each source may be downloaded. CSCview save files are output in RDB-like and VOTable format. The available CSC data products include event files, spectra, lightcurves, and images, all of which are processed with the CIAO software. CSC data may also be accessed non-interactively with Unix command-line tools such as cURL and Wget, using ADQL 2.0 query syntax. In fact, CSCview features a separate ADQL query form for those who wish to specify this type of query within the GUI. Several interfaces are available for learning if a source is included in the catalog (in addition to CSCview): 1) the CSC interface to Sky in Google Earth shows the footprint of each Chandra observation on the sky, along with the CSC footprint for comparison (CSC source properties are also accessible when a source within a Chandra field-of-view is clicked); 2) the CSC Limiting Sensitivity online tool indicates if a source at an input celestial location was too faint for detection; 3) an IVOA Simple Cone Search interface locates all CSC sources within a specified radius of an R.A. and Dec.; and 4) the CSC-SDSS cross-match service returns the list of sources common to the CSC and SDSS, either all such sources or a subset based on search criteria.

Astronomical catalog desk reference, 1994 edition

NASA Technical Reports Server (NTRS)

1994-01-01

The Astronomical Catalog Desk Reference is designed to aid astronomers in locating machine readable catalogs in the Astronomical Data Center (ADC) archives. The key reference components of this document are as follows: A listing of shortened titles for all catalogs available from the ADC (includes the name of the lead author and year of publication), brief descriptions of over 300 astronomical catalogs, an index of ADC catalog numbers by subject keyword, and an index of ADC catalog numbers by author. The heart of this document is the set of brief descriptions generated by the ADC staff. The 1994 edition of the Astronomical Catalog Desk Reference contains descriptions for over one third of the catalogs in the ADC archives. Readers are encouraged to refer to this section for concise summaries of those catalogs and their contents.

Variable Stars with the Kepler Space Telescope

NASA Astrophysics Data System (ADS)

Molnár, L.; Szabó, R.; Plachy, E.

2016-12-01

The Kepler space telescope has revolutionized our knowledge about exoplanets and stars and is continuing to do so in the K2 mission. The exquisite photometric precision, together with the long, uninterrupted observations opened up a new way to investigate the structure and evolution of stars. Asteroseismology, the study of stellar oscillations, allowed us to investigate solar-like stars, and to peer into the insides of red giants and massive stars. But many discoveries have been made about classical variable stars, too, ranging from pulsators like Cepheids and RR Lyraes to eclipsing binary stars and cataclysmic variables, and even supernovae. In this review, which is far from an exhaustive summary of all results obtained with Kepler, we collected some of the most interesting discoveries, and ponder on the role for amateur observers in this golden era of stellar astrophysics.

Cataloging: Librarianship's Best Bargain.

ERIC Educational Resources Information Center

Morris, Dilys E.; Wool, Gregory

1999-01-01

Iowa State University's cost study proves academic librarians can keep cataloging in-house and save staff costs. Several factors play a role in the productivity surge at ISU: increasing use of shared cataloging; growth of online authoring files; expanding role of support staff; increasing automation of catalogers' work; and structural flattening…

The Online Catalog Revolution.

ERIC Educational Resources Information Center

Kilgour, Frederick G.

1984-01-01

A review of library technological development and card catalog innovations of the past century and a half precedes a discussion of online public access catalog development. Design requirements and purpose of the online catalog, access techniques and provisions, costs, and future integration are highlighted. Twenty-two references are listed. (EJS)

Hubble Source Catalog

NASA Astrophysics Data System (ADS)

Lubow, S.; Budavári, T.

2013-10-01

We have created an initial catalog of objects observed by the WFPC2 and ACS instruments on the Hubble Space Telescope (HST). The catalog is based on observations taken on more than 6000 visits (telescope pointings) of ACS/WFC and more than 25000 visits of WFPC2. The catalog is obtained by cross matching by position in the sky all Hubble Legacy Archive (HLA) Source Extractor source lists for these instruments. The source lists describe properties of source detections within a visit. The calculations are performed on a SQL Server database system. First we collect overlapping images into groups, e.g., Eta Car, and determine nearby (approximately matching) pairs of sources from different images within each group. We then apply a novel algorithm for improving the cross matching of pairs of sources by adjusting the astrometry of the images. Next, we combine pairwise matches into maximal sets of possible multi-source matches. We apply a greedy Bayesian method to split the maximal matches into more reliable matches. We test the accuracy of the matches by comparing the fluxes of the matched sources. The result is a set of information that ties together multiple observations of the same object. A byproduct of the catalog is greatly improved relative astrometry for many of the HST images. We also provide information on nondetections that can be used to determine dropouts. With the catalog, for the first time, one can carry out time domain, multi-wavelength studies across a large set of HST data. The catalog is publicly available. Much more can be done to expand the catalog capabilities.

Detecting Close-In Extrasolar Giant Planets with the Kepler Photometer via Scattered Light

NASA Astrophysics Data System (ADS)

Jenkins, J. M.; Doyle, L. R.; Kepler Discovery Mission Team

2003-05-01

NASA's Kepler Mission will be launched in 2007 primarily to search for transiting Earth-sized planets in the habitable zones of solar-like stars. In addition, it will be poised to detect the reflected light component from close-in extrasolar giant planets (CEGPs) similar to 51 Peg b. Here we use the DIARAD/SOHO time series along with models for the reflected light signatures of CEGPs to evaluate Kepler's ability to detect such planets. We examine the detectability as a function of stellar brightness, stellar rotation period, planetary orbital inclination angle, and planetary orbital period, and then estimate the total number of CEGPs that Kepler will detect over its four year mission. The analysis shows that intrinsic stellar variability of solar-like stars is a major obstacle to detecting the reflected light from CEGPs. Monte Carlo trials are used to estimate the detection threshold required to limit the total number of expected false alarms to no more than one for a survey of 100,000 stellar light curves. Kepler will likely detect 100-760 51 Peg b-like planets by reflected light with orbital periods up to 7 days. LRD was supported by the Carl Sagan Chair at the Center for the Study of Life in the Universe, a division of the SETI Institute. JMJ received support from the Kepler Mission Photometer and Science Office at NASA Ames Research Center.

Passing NASA's Planet Quest Baton from Kepler to TESS

NASA Astrophysics Data System (ADS)

Jenkins, J.

Kepler vaulted into the heavens on March 7, 2009, initiating NASAs search for Earth- size planets orbiting Sun-like stars in the habitable zone, where liquid water could exist on a rocky planetary surface. In the 4 years since Kepler began science operations, a flood of photometric data on upwards of 190,000 stars of unprecedented precision and continuity has provoked a watershed of 134+ confirmed or validated planets, 3200+ planetary candidates (most sub-Neptune in size and many compara- ble to or smaller than Earth), and a resounding revolution in asteroseismology and astrophysics. The most recent discoveries include Kepler-62 with 5 planets total of which 2 are in the habitable zone with radii of 1.4 and 1.7 Re. The focus of the mission is shifting towards how to rapidly vet the 18,000+ threshold crossing events produced with each transiting planet search, and towards those studies that will allow us to understand what the data are saying about the prevalence of planets in the solar neighborhood and throughout the galaxy. This talk will provide an overview of the science results from the Kepler Mission and the work ahead to derive the frequency of Earth-size planets in the habitable zone of solar-like stars from the treasure trove of Kepler data. NASAs quest for exoplanets continues with the Transiting Exoplanet Survey Satel- lite (TESS) mission, slated for launch in May 2017 by NASAs Explorer Program. TESS will conduct an all-sky transit survey to identify the 1000 best small exoplanets in the solar neighborhood for follow up observations and characterization. TESSs targets will include all F, G, K dwarfs from +4 to +12 magnitude and all M dwarfs known within ˜200 light-years. 500,000 target stars will be observed over two years with ˜500 square degrees observed continuously for a year in each hemisphere in the James Webb Space Telescopes continuously viewable zones. Since the typical TESS target star is 5 magnitudes brighter than Kepler’s and 10 times

Exoplanet studies. Spectral confirmation of photometric exoplanet candidates discovered by the "Kepler" mission

NASA Astrophysics Data System (ADS)

Gadelshin, D. R.; Valyavin, G. G.; Yushkin, M. V.; Semenko, E. A.; Galazutdinov, G. A.; Maryeva, O. V.; Valeev, A. F.; Lee, Byeong-Cheol

2017-07-01

We present the results of spectroscopic confirmation of exoplanet candidates from the "Kepler" space mission catalog. We used the NES spectrometer of the 6-m Russian BTA telescope to investigate the Doppler variability of the radial velocities of the host stars of KOI-974.01, KOI-2687.01/02, and KOI-2706.01. According to the derived upper limits, KOI-2706.01 has a mass significantly smaller than 12 Jupiter masses, which directly indicates its planetary nature. We show that KOI-2687.01 and KOI-2687.02, which have Earth-size or white dwarf-size radii according to photometric data, cannot be white dwarfs, and are therefore exoplanets. Radial velocity analysis for KOI-974, an F-type star, has shown noticeable variations with a half-amplitude of 400 ms-1, which correlate poorly with the phase of its orbital rotation. This can indicate a presence of other massive planets in the system, with orbits closer or farther from the host star than the orbit of KOI-974.01, or a low mass star in a distant outer orbit. Using the method of synthetic spectra, we obtained more accurate atmospheric parameter and radius estimates for all the program host stars, which, in turn, allowed us to refine the radii of the studied exoplanet candidates.

Rolling Band Artifact Flagging in the Kepler Data Pipeline

NASA Astrophysics Data System (ADS)

Clarke, Bruce; Kolodziejczak, Jeffery J; Caldwell, Douglas A.

2014-06-01

Instrument-induced artifacts in the raw Kepler pixel data include time-varying crosstalk from the fine guidance sensor (FGS) clock signals, manifestations of drifting moiré pattern as locally correlated nonstationary noise and rolling bands in the images. These systematics find their way into the calibrated pixel time series and ultimately into the target flux time series. The Kepler pipeline module Dynablack models the FGS crosstalk artifacts using a combination of raw science pixel data, full frame images, reverse-clocked pixel data and ancillary temperature data. The calibration module (CAL) uses the fitted Dynablack models to remove FGS crosstalk artifacts in the calibrated pixels by adjusting the black level correction per cadence. Dynablack also detects and flags spatial regions and time intervals of strong time-varying black-level. These rolling band artifact (RBA) flags are produced on a per row per cadence basis by searching for transit signatures in the Dynablack fit residuals. The Photometric Analysis module (PA) generates per target per cadence data quality flags based on the Dynablack RBA flags. Proposed future work includes using the target data quality flags as a basis for de-weighting in the Presearch Data Conditioning (PDC), Transiting Planet Search (TPS) and Data Validation (DV) pipeline modules. We discuss the effectiveness of RBA flagging for downstream users and illustrate with some affected light curves. We also discuss the implementation of Dynablack in the Kepler data pipeline and present results regarding the improvement in calibrated pixels and the expected improvement in cotrending performance as a result of including FGS corrections in the calibration. Funding for the Kepler Mission has been provided by the NASA Science Mission Directorate.

The Kepler Mission: A Photometric Search for Earthlike Planets

NASA Technical Reports Server (NTRS)

Lissauer, Jack J.; Borucki, William; Koch, David; Young, Richard E. (Technical Monitor)

1998-01-01

If Earth lies in or near the orbital plane of an extrasolar planet, that planet passes in front of the disk of its star once each orbit as viewed from Earth. Precise photometry can reveal such transits, which can be distinguished from rotationally-modulated starspots and intrinsic stellar variability by their periodicity, square-well shapes and relative spectral neutrality. Transit observations would provide the size and orbital period of the detected planet. Although geometrical considerations limit the fraction of planets detectable by this technique, many stars can be surveyed within the field of view of one telescope, so transit photometry is quite efficient. Scintillation in and variability of Earth's atmosphere limit photometric precision to roughly one-thousandth of a magnitude, allowing detection of transits by Jupiter-sized planets but not by Earth-sized planets from the ground. The COROT spacecraft will be able to detect Uranus-sized planets orbiting near stars. The Kepler Mission, which is being proposed to NASA's Discovery Program this year, will have a photometer with a larger aperture (1 meter) than will COROT, so it will be able to detect transits by planets as small as Earth. Moreover, the Kepler mission will examine the same star field for four years, allowing confirmation of planets with orbital periods of a year. If the Sun's planetary system is typical for single stars, Kepler should detect approximately 480 terrestrial planets. Assuming the statistics from radial velocity surveys are typical, Kepler should also detect transits of 150 inner giant planets and reflected light variations of 1400 giant planets with orbital periods of less than one week.

PLANET HUNTERS. VIII. CHARACTERIZATION OF 41 LONG-PERIOD EXOPLANET CANDIDATES FROM KEPLER ARCHIVAL DATA

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wang, Ji; Fischer, Debra A.; Picard, Alyssa

2015-12-20

The census of exoplanets is incomplete for orbital distances larger than 1 AU. Here, we present 41 long-period planet candidates in 38 systems identified by Planet Hunters based on Kepler archival data (Q0–Q17). Among them, 17 exhibit only one transit, 14 have two visible transits, and 10 have more than three visible transits. For planet candidates with only one visible transit, we estimate their orbital periods based on transit duration and host star properties. The majority of the planet candidates in this work (75%) have orbital periods that correspond to distances of 1–3 AU from their host stars. We conduct follow-up imaging and spectroscopic observationsmore » to validate and characterize planet host stars. In total, we obtain adaptive optics images for 33 stars to search for possible blending sources. Six stars have stellar companions within 4″. We obtain high-resolution spectra for 6 stars to determine their physical properties. Stellar properties for other stars are obtained from the NASA Exoplanet Archive and the Kepler Stellar Catalog by Huber et al. We validate 7 planet candidates that have planet confidence over 0.997 (3σ level). These validated planets include 3 single-transit planets (KIC-3558849b, KIC-5951458b, and KIC-8540376c), 3 planets with double transits (KIC-8540376b, KIC-9663113b, and KIC-10525077b), and 1 planet with four transits (KIC-5437945b). This work provides assessment regarding the existence of planets at wide separations and the associated false positive rate for transiting observation (17%–33%). More than half of the long-period planets with at least three transits in this paper exhibit transit timing variations up to 41 hr, which suggest additional components that dynamically interact with the transiting planet candidates. The nature of these components can be determined by follow-up radial velocity and transit observations.« less

Kepler: NASA's First Mission Capable of Finding Earth-Size Planets

NASA Technical Reports Server (NTRS)

Borucki, William J.

2009-01-01

Kepler, a NASA Discovery mission, is a spaceborne telescope designed to search a nearby region of our galaxy for Earth-size planets orbiting in the habitable zone of stars like our sun. The habitable zone is that region around a start where the temperature permits water to be liquid on the surface of a planet. Liquid water is considered essential forth existence of life. Mission Phases: Six mission phases have been defined to describe the different periods of activity during Kepler's mission. These are: launch; commissioning; early science operations, science operations: and decommissioning

Pulsation Modes of sdBV Stars Observed with Kepler

NASA Astrophysics Data System (ADS)

Reed, M. D.; Baran, A. S.; Quint, A. C.; Telting, J. H.; Østensen, R. H.; O'Toole, S. J.

2012-03-01

During the Kepler satellite's first year of operation, its short cadence observations were obtained in a survey mode where targets received one month of nearly continuous observations. 48 subdwarf B stars were observed of which 14 were found to be pulsators, with only one of these having predominantly short periods. The other 13 were mostly long-period (g-mode) pulsators. With Kepler's exquisite duty cycle and data quality, an average of 23 periods per star were detected with ranges from 6 to 44. As the g-mode pulsations are high-overtone (typically n > 10), asymptotic period relations could apply and so we searched for evenly spaced periods. We found these for l =1 and 2 modes in all but one of the Kepler stars and that one outlier has a very complex temporal spectrum caused by a close companion. We were able to associate 204 of 299 measured periods with l = 1 and 2 modes. Those results should provide tight constraints on pulsation models. However, they also offer a surprise as current structure models predict significant mode trapping, which is inconsistent with the period spacings we have found.

ROTATING STARS FROM KEPLER OBSERVED WITH GAIA DR1

DOE Office of Scientific and Technical Information (OSTI.GOV)

Davenport, James R. A.

2017-01-20

Astrometric data from the recent Gaia Data Release 1 have been matched against the sample of stars from Kepler with known rotation periods. A total of 1299 bright rotating stars were recovered from the subset of Gaia sources with good astrometric solutions, most with temperatures above 5000 K. From these sources, 894 were selected as lying near the main sequence using their absolute G -band magnitudes. These main-sequence stars show a bimodality in their rotation period distribution, centered roughly around a 600 Myr rotation isochrone. This feature matches the bimodal period distribution found in cooler stars with Kepler , butmore » was previously undetected for solar-type stars due to sample contamination by subgiants. A tenuous connection between the rotation period and total proper motion is found, suggesting that the period bimodality is due to the age distribution of stars within ∼300 pc of the Sun, rather than a phase of rapid angular momentum loss. This work emphasizes the unique power for understanding stellar populations that is created by combining temporal monitoring from Kepler with astrometric data from Gaia .« less

Kepler Mission: Detecting Earth-sized Planets in Habitable Zones

NASA Technical Reports Server (NTRS)

Kondo, Yoji; Fisher, Richard R. (Technical Monitor)

2001-01-01

The Kepler Mission, which is presently in Phase A, is being proposed for launch in 5 years for a 4-year mission to determine the frequency of Earth-sized or larger planets in habitable zones in our galaxy. Kepler will be placed in an Earth-trailing orbit to provide stable physical environments for the sensitive scientific instruments. The satellite is equipped with a photometric system with the precision of 10E-5, which should be sufficient for detecting the transits of Earth-sized or larger planets in front of dwarf stars similar to the Sun. Approximately 100,000 or more sun-like stars brighter than the 14th apparently magnitude will be monitored continuously for 4 years in a preselected region of the sky, which is about 100 square degrees in size. In addition, Kepler will have a participating scientist program that will enable research in intrinsic variable stars, interacting binaries including cataclysmic stars and X-ray binaries, and a large number of solar analogs in our galaxy. Several ten thousand additional stars may be investigated in the guest observer program open to the whole world.

PLANET HUNTERS: NEW KEPLER PLANET CANDIDATES FROM ANALYSIS OF QUARTER 2

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lintott, Chris J.; Schwamb, Megan E.; Schwainski, Kevin, E-mail: cjl@astro.ox.ac.uk

2013-06-15

We present new planet candidates identified in NASA Kepler Quarter 2 public release data by volunteers engaged in the Planet Hunters citizen science project. The two candidates presented here survive checks for false positives, including examination of the pixel offset to constrain the possibility of a background eclipsing binary. The orbital periods of the planet candidates are 97.46 days (KIC 4552729) and 284.03 (KIC 10005758) days and the modeled planet radii are 5.3 and 3.8 R{sub Circled-Plus }. The latter star has an additional known planet candidate with a radius of 5.05 R{sub Circled-Plus} and a period of 134.49 days,more » which was detected by the Kepler pipeline. The discovery of these candidates illustrates the value of massively distributed volunteer review of the Kepler database to recover candidates which were otherwise uncataloged.« less

Had the Planet Mars Not Existed: Kepler's Equant Model and Its Physical Consequences

ERIC Educational Resources Information Center

Bracco, C.; Provost, J.P.

2009-01-01

We examine the equant model for the motion of planets, which was the starting point of Kepler's investigations before he modified it because of Mars observations. We show that, up to first order in eccentricity, this model implies for each orbit a velocity, which satisfies Kepler's second law and Hamilton's hodograph, and a centripetal…

Mars landing site catalog

NASA Technical Reports Server (NTRS)

Greeley, Ronald (Editor)

1990-01-01

The catalog was compiled from material provided by the planetary community for areas on Mars that are of potential interest for future exploration. The catalog has been edited for consistency insofar as practical; however, the proposed scientific objectives and characteristics have not been reviewed. This is a working catalog that is being revised, updated, and expanded continually.

Lifting Transit Signals from the Kepler Noise Floor. I. Discovery of a Warm Neptune

NASA Astrophysics Data System (ADS)

Kunimoto, Michelle; Matthews, Jaymie M.; Rowe, Jason F.; Hoffman, Kelsey

2018-01-01

Light curves from the 4-year Kepler exoplanet hunting mission have been searched for transits by NASA’s Kepler team and others, but there are still important discoveries to be made. We have searched the light curves of 400 Kepler Objects of Interest (KOIs) to find transit signals down to signal-to-noise ratio (S/N) ∼ 6, which is under the limit of S/N ∼ 7.1 that has been commonly adopted as a strict threshold to distinguish between a transit candidate and false alarm. We detect four new and convincing planet candidates ranging in radius from near-Mercury-size to slightly larger than Neptune. We highlight the discovery of KOI-408.05 (period = 637 days; radius = 4.9 R ⊕ incident flux = 0.6 S ⊕), a planet candidate within its host star’s Habitable Zone. We dub this planet a “warm Neptune,” a likely volatile-rich world that deserves closer inspection. KOI-408.05 joins 21 other confirmed and candidate planets in the current Kepler sample with semimajor axes a > 1.4 au. These discoveries are significant as a demonstration that the S/N threshold for detection used by the Kepler project is open to debate.

LANDSAT US standard catalog, 1-30 September 1977. [LANDSAT imagery for September, 1977

NASA Technical Reports Server (NTRS)

1977-01-01

The U. S. Standard Catalog lists U. S. imagery acquired by LANDSAT 1 and 2 which has been processed and input to the data files during the referenced month. Data, such as date acquired, cloud cover, and image quality are given for each scene. The microfilm roll and frame on which the scene may be found is also given.

Amplitude Variability in gamma Dor and delta Sct Stars Observed by Kepler

DOE Office of Scientific and Technical Information (OSTI.GOV)

Guzik, Joyce Ann; Kosak, Mary Katherine; Bradley, Paul Andrew

2015-08-17

The NASA Kepler spacecraft data revealed a large number of new multimode nonradially pulsating gamma Dor and delta Sct variable stars. The Kepler high-precision long time-series photometry makes it possible to study amplitude variations of the frequencies, and recent literature on amplitude and frequency variations in nonradially pulsating variables is summarized. Several methods are applied to study amplitude variability in about a dozen gamma Doradus or delta Scuti candidate variable stars observed for several quarters as part of the Kepler Guest Observer program. The magnitude and timescale of the amplitude variations are discussed, along with the presence or absence ofmore » correlations between amplitude variations for different frequencies of a given star. Proposed causes of amplitude spectrum variability that will require further investigation are also discussed.« less

Centralized automated cataloging of health science materials in the MLC/SUNY/OCLC shared cataloging service.

PubMed Central

Raper, J E

1977-01-01

Since February 1976, The Medical Library Center of New York, with the assistance of the SUNY/OCLC Network, has offered, on a subscription basis, a centralized automated cataloging service to health science libraries in the greater metropolitan New York area. By using workforms and prints of OCLC record (amended by the subscribing participants), technical services personnel at the center have fed cataloging data, via a CRT terminal, into the OCLC system, which provides (1) catalog cards, received in computer filing order; (2) book card, spine, and pocket labels; (3) accessions lists; and (4) data for eventual production of book catalogs and union catalogs. The experience of the center in the development, implementation, operation, and budgeting of its shared cataloging service is discussed. PMID:843650

Centralized automated cataloging of health science materials in the MLC/SUNY/OCLC shared cataloging service.

PubMed

Raper, J E

1977-04-01

Since February 1976, The Medical Library Center of New York, with the assistance of the SUNY/OCLC Network, has offered, on a subscription basis, a centralized automated cataloging service to health science libraries in the greater metropolitan New York area. By using workforms and prints of OCLC record (amended by the subscribing participants), technical services personnel at the center have fed cataloging data, via a CRT terminal, into the OCLC system, which provides (1) catalog cards, received in computer filing order; (2) book card, spine, and pocket labels; (3) accessions lists; and (4) data for eventual production of book catalogs and union catalogs. The experience of the center in the development, implementation, operation, and budgeting of its shared cataloging service is discussed.

Presearch data conditioning in the Kepler Science Operations Center pipeline

NASA Astrophysics Data System (ADS)

Twicken, Joseph D.; Chandrasekaran, Hema; Jenkins, Jon M.; Gunter, Jay P.; Girouard, Forrest; Klaus, Todd C.

2010-07-01

We describe the Presearch Data Conditioning (PDC) software component and its context in the Kepler Science Operations Center (SOC) Science Processing Pipeline. The primary tasks of this component are to correct systematic and other errors, remove excess flux due to aperture crowding, and condition the raw flux light curves for over 160,000 long cadence (~thirty minute) and 512 short cadence (~one minute) stellar targets. Long cadence corrected flux light curves are subjected to a transiting planet search in a subsequent pipeline module. We discuss science algorithms for long and short cadence PDC: identification and correction of unexplained (i.e., unrelated to known anomalies) discontinuities; systematic error correction; and removal of excess flux due to aperture crowding. We discuss the propagation of uncertainties from raw to corrected flux. Finally, we present examples from Kepler flight data to illustrate PDC performance. Corrected flux light curves produced by PDC are exported to the Multi-mission Archive at Space Telescope [Science Institute] (MAST) and are made available to the general public in accordance with the NASA/Kepler data release policy.

Validating the Presence of a Moon Orbiting Kepler-1625b

NASA Astrophysics Data System (ADS)

Teachey, Alex

2017-08-01

The Hunt for Exomoons with Kepler (HEK) project has been engaged in the search for exomoons for the past several years, but so far no reliable exomoon detection can be found in the literature. After our largest survey to date, we have recently detected a strong candidate moon signal in the light curve of Kepler-1625b. The planet exhibits three transits in the Kepler data (P 287 days), in which we detect out-of-transit flux dips consistent with the presence of a large moon to greater than 4 sigma confidence. We propose to observe the next transit of the planet, which will occur October 29th, 2017 (Cycle-25), in the near-infrared using the Wide Field Camera 3 instrument on HST. We request 26 orbits of the telescope, which will allow us to capture the full planet-moon transit event and provide an opportunity to measure the transmission spectra of both the planet and the moon. We anticipate that the proposed measurements would be sufficient to confirm the first unambiguous detection of a moon beyond our Solar System.

About 30% of Sun-like Stars Have Kepler-like Planetary Systems: A Study of Their Intrinsic Architecture

NASA Astrophysics Data System (ADS)

Zhu, Wei; Petrovich, Cristobal; Wu, Yanqin; Dong, Subo; Xie, Jiwei

2018-06-01

We constrain the intrinsic architecture of Kepler planetary systems by modeling the observed multiplicities of the transiting planets (tranets) and their transit timing variations (TTVs). We robustly determine that the fraction of Sun-like stars with Kepler-like planets, η Kepler, is 30 ± 3%. Here, Kepler-like planets are planets that have radii R p ≳ R ⊕ and orbital periods P < 400 days. Our result thus significantly revises previous claims that more than 50% of Sun-like stars have such planets. Combined with the average number of Kepler planets per star (∼0.9), we obtain that on average each planetary system has 3.0 ± 0.3 planets within 400 days. We also find that the dispersion in orbital inclinations of planets within a given planetary system, σ i,k , is a steep function of its number of planets, k. This can be parameterized as {σ }i,k\\propto {k}α and we find that ‑4 < α < ‑2 at the 2σ level. Such a distribution well describes the observed multiplicities of both transits and TTVs with no excess of single-tranet systems. Therefore we do not find evidence supporting the so-called “Kepler dichotomy.” Together with a previous study on orbital eccentricities, we now have a consistent picture: the fewer planets in a system, the hotter it is dynamically. We discuss briefly possible scenarios that lead to such a trend. Despite our solar system not belonging to the Kepler club, it is interesting to notice that the solar system also has three planets within 400 days and that the inclination dispersion is similar to Kepler systems of the same multiplicity.

Boo! Outsourcing from the Cataloging Perspective.

ERIC Educational Resources Information Center

Hill, Janet Swan

1998-01-01

Examines long-accepted ways library cataloging departments have used outsourcing (cataloging records, card production, authority control, card filling, and retrospective conversion) and potential outsourcing activities (original cataloging, and copy cataloging). Discusses reasons why outsourcing is controversial. (PEN)

The mathematics of the Area Law: Kepler's successful proof in Epitome Astronomiae Copernicanae (1621)

NASA Astrophysics Data System (ADS)

Davis, A. E. L.

2003-07-01

After the discovery of his three laws, Kepler invented a way of proving the Area Law when applied to the path of a primary planet (the ellipse with one focus at the Sun). The law states that the area swept out by the line joining the planet to the Sun measures the time taken: Kepler was therefore dealing with a restricted version of Newton's general area-proposition. Kepler's demonstration was set out in Epitome V (1621), and consisted of matching an element of area to an element of time, where each was mathematically determined. His treatment of the area depended solely on the geometry of Euclid's Elements, involving only straight-line and circle propositions - so we have to account for his deliberate avoidance of the sophisticated conic-geometry associated with Apollonius. We show also how his proof could have been made watertight according to modern standards, using methods that lay entirely within his power. The greatest innovation, however, occurred in Kepler's fresh formulation of the measure of time. We trace this concept in relation to early astronomy and conclude that Kepler's treatment unexpectedly entailed the assumption that time varied nonuniformly; meanwhile, a geometrical measure provided the independent variable. Even more surprisingly, this approach turns out to be entirely sound when assessed in present-day terms. Kepler himself attributed the cause of the motion of a single planet around the Sun to a set of 'physical' suppositions which represented his religious as well as his Copernican convictions; and we have pared to a minimum - down to four - the number he actually required to achieve this. In the Appendix we use modern mathematics to emphasize the simplicity, both geometrical and kinematical, that objectively characterizes the Sun-focused ellipse as an orbit. Meanwhile we highlight the subjective simplicity of Kepler's own techniques (most of them extremely traditional, some newly created). These two approaches complement each other to

BIRTH LOCATIONS OF THE KEPLER CIRCUMBINARY PLANETS

DOE Office of Scientific and Technical Information (OSTI.GOV)

Silsbee, Kedron; Rafikov, Roman R., E-mail: ksilsbee@astro.princeton.edu

2015-07-20

The Kepler mission has discovered about a dozen circumbinary planetary systems, all containing planets on ∼1 AU orbits. We place bounds on the locations in the circumbinary protoplanetary disk, where these planets could have formed through collisional agglomeration starting from small (kilometer-sized or less) planetesimals. We first present a model of secular planetesimal dynamics that accounts for the (1) perturbation due to the eccentric precessing binary, as well as the (2) gravity and (3) gas drag from a precessing eccentric disk. Their simultaneous action leads to rich dynamics, with (multiple) secular resonances emerging in the disk. We derive analytic resultsmore » for size-dependent planetesimal eccentricity and demonstrate the key role of the disk gravity for circumbinary dynamics. We then combine these results with a simple model for collisional outcomes and find that in systems like Kepler-16, planetesimal growth starting with 10–100 m planetesimals is possible outside a few AU. The exact location exterior to which this happens is sensitive to disk eccentricity, density, and precession rate, as well as to the size of the first generation of planetesimals. Strong perturbations from the binary in the inner part of the disk, combined with a secular resonance at a few AU, inhibit the growth of kilometer-sized planetesimals within 2–4 AU of the binary. In situ planetesimal growth in the Kepler circumbinary systems is possible only starting from large initial planetesimals (few-kilometer-sized even assuming favorable disk properties, i.e., low surface density)« less

NASA's Kepler Mission Discovers Its Smallest Habitable Zone Planets (Reporter Pkg)

NASA Image and Video Library

2013-04-18

NASA's Kepler mission has discovered two new planetary systems that include three super-Earth-size planets in the 'habitable zone,' the range of distance from a star where the surface temperature of an orbiting planet might be suitable for liquid water. Scientists do not know whether life could exist on the newfound planets, but their discovery signals we are another step closer to finding a world similar to Earth around a star like our sun. Kepler-62 and -69 systems

The Kepler End-to-End Data Pipeline: From Photons to Far Away Worlds

NASA Technical Reports Server (NTRS)

Cooke, Brian; Thompson, Richard; Standley, Shaun

2012-01-01

The Kepler mission is described in overview and the Kepler technique for discovering exoplanets is discussed. The design and implementation of the Kepler spacecraft, tracing the data path from photons entering the telescope aperture through raw observation data transmitted to the ground operations team is described. The technical challenges of operating a large aperture photometer with an unprecedented 95 million pixel detector are addressed as well as the onboard technique for processing and reducing the large volume of data produced by the Kepler photometer. The technique and challenge of day-to-day mission operations that result in a very high percentage of time on target is discussed. This includes the day to day process for monitoring and managing the health of the spacecraft, the annual process for maintaining sun on the solar arrays while still keeping the telescope pointed at the fixed science target, the process for safely but rapidly returning to science operations after a spacecraft initiated safing event and the long term anomaly resolution process.The ground data processing pipeline, from the point that science data is received on the ground to the presentation of preliminary planetary candidates and supporting data to the science team for further evaluation is discussed. Ground management, control, exchange and storage of Kepler's large and growing data set is discussed as well as the process and techniques for removing noise sources and applying calibrations to intermediate data products.

Kepler, Horrocks and the Transit of Venus in 1639

NASA Astrophysics Data System (ADS)

Posch, Thomas; Kerschbaum, Franz

2004-08-01

Kepler was the first astronomer to predict a transit of Venus in his 'Admonitio' from 1629. This prediction was based on his 'Rudolphine Tables', published three years before. Even though both works - making use of his ground-breaking new theory of the planetary motions - and the message of his 'Admonitio' are a great achievement, it turned out some years later that the latter contained some views that needed to be corrected. First of all, there was a small but -- for European observers -- fatal error concerning the exact time of the Venus transit of 1631, leading to its non-observation in Paris. Second, Kepler failed to predict the 1639 Venus transit. It was the English astronomer Horrocks who first recognized this and who did indeed observe the latter. Third, Kepler's ideas about the size of the solar system (and, hence, the apparent diameters of the planets) were substantially wrong. In our contribution, we analyze the historical background to these errors of a genius, based on his original texts, as well as Horrocks' and Hevelius' views and discoveries on the subject. It seems that Hevelius' annotated edition of Horrocks' account 'Venus in sole visa' has scarcely been studied in the way it would deserve -- which is maybe due to the fact that only a few libraries are still in possession of this book. There is little doubt that Kepler, had he lived until 1639, would have had to change his views on the proportions of our solar system dramatically. At the same time, it should be stressed that his predition and Horrocks' observations demonstrate that knowing the mechanism of the planetary motions is by far more important than knowing the actual size of the planetary orbits and planetary bodies.

Finding Kepler's Exoearths

NASA Astrophysics Data System (ADS)

Petigura, Erik; Marcy, G.

2012-05-01

With its unprecedented photometric precision and duty cycle, the Kepler mission offers the first opportunity to detect Earth analog planets. Detecting transits with depths of 0.01%, periods of 1 year, and durations of 10 hours pose a novel challenge, prompting an optimization of both the detrending of the photometry and of the transit search algorithm. We present TERRA, the Transiting Exoearth Robust Reduction Algorithm, designed specifically to find earth analogs. TERRA carefully treats systematic effects with timescales comparable to an exoearth transit and removes features that are not important from the perspective of transit detection. We demonstrate TERRA's detection power through an extensive transit injection and recovery experiment.

Kepler's Third Law Without a Calculator

NASA Astrophysics Data System (ADS)

Ruiz, Michael J.

2004-12-01

At the University of North Carolina at Asheville (UNC-A) we have used Kepler's third law in a liberal-arts conceptual astronomy course to help students sharpen their quantitative skills without using a calculator. Doing quantitative physics without a calculator represents one of the many ways we can study the physical world. Furthermore, it is fun.

NASA Space Science Resource Catalog

NASA Astrophysics Data System (ADS)

Teays, T.

2000-05-01

The NASA Office of Space Science Resource Catalog provides a convenient online interface for finding space science products for use in classrooms, science museums, planetariums, and many other venues. Goals in developing this catalog are: (1) create a cataloging system for all NASA OSS education products, (2) develop a system for characterizing education products which is meaningful to a large clientele, (3) develop a mechanism for evaluating products, (4) provide a user-friendly interface to search and access the data, and (5) provide standardized metadata and interfaces to other cataloging and library systems. The first version of the catalog is being tested at the spring 2000 conventions of the National Science Teachers Association (NSTA) and the National Council of Teachers of Mathematics (NCTM) and will be released in summer 2000. The catalog may be viewed at the Origins Education Forum booth.

Planetary System Comparisons

NASA Image and Video Library

2015-07-23

This size and scale of the Kepler-452 system compared alongside the Kepler-186 system and the solar system. Kepler-186 is a miniature solar system that would fit entirely inside the orbit of Mercury. The habitable zone of Kepler-186 is very small compared to that of Kepler-452 or the sun because it is a much smaller, cooler star. The size and extent of the habitable zone of Kepler-452 is nearly the same as that of the sun, but is slightly bigger because Kepler-452 is somewhat older, bigger and brighter. The size of the orbit of Kepler-452b is nearly the same as that of Earth at 1.05 astronomical units (an astronomical unit is the distance between Earth and the sun). Kepler-452b orbits its star once every 385 days. http://photojournal.jpl.nasa.gov/catalog/PIA19826

A Blind Survey for AGN in the Kepler Field through Optical Variability

NASA Astrophysics Data System (ADS)

Olling, Robert; Shaya, E. J.; Mushotzky, R.

2013-01-01

We present an initial analysis of three quarters of Kepler LLC time series of 400 small galaxies. The Kepler LLC data is sampled about twice per hour, and allows us to investigate variability on time scales between about one day and one month. The calibrated Kepler LLC light curves still contain many instrumental effects that can not be taken out in a robust manner. Instead, our analysis relies on the similarity of variability measures in the three independent quarters to decide if an galaxy shows variability, or not. We estimate that roughly 15% of our small galaxies shows variability at levels exceeding several parts per thousand (mmag) on timescales of days to weeks. However, this estimate is probably uncertain by a factor of two. Our data is more sensitive by several factors of ten as compared to extant data sets.

An Accurate Mass Determination for Kepler-1655b, a Moderately Irradiated World with a Significant Volatile Envelope

NASA Astrophysics Data System (ADS)

Haywood, Raphaëlle D.; Vanderburg, Andrew; Mortier, Annelies; Giles, Helen A. C.; López-Morales, Mercedes; Lopez, Eric D.; Malavolta, Luca; Charbonneau, David; Collier Cameron, Andrew; Coughlin, Jeffrey L.; Dressing, Courtney D.; Nava, Chantanelle; Latham, David W.; Dumusque, Xavier; Lovis, Christophe; Molinari, Emilio; Pepe, Francesco; Sozzetti, Alessandro; Udry, Stéphane; Bouchy, François; Johnson, John A.; Mayor, Michel; Micela, Giusi; Phillips, David; Piotto, Giampaolo; Rice, Ken; Sasselov, Dimitar; Ségransan, Damien; Watson, Chris; Affer, Laura; Bonomo, Aldo S.; Buchhave, Lars A.; Ciardi, David R.; Fiorenzano, Aldo F.; Harutyunyan, Avet

2018-05-01

We present the confirmation of a small, moderately irradiated (F = 155 ± 7 F ⊕) Neptune with a substantial gas envelope in a P = 11.8728787 ± 0.0000085 day orbit about a quiet, Sun-like G0V star Kepler-1655. Based on our analysis of the Kepler light curve, we determined Kepler-1655b’s radius to be 2.213 ± 0.082 R ⊕. We acquired 95 high-resolution spectra with Telescopio Nazionale Galileo/HARPS-N, enabling us to characterize the host star and determine an accurate mass for Kepler-1655b of 5.0{+/- }2.83.1 {M}\\oplus via Gaussian-process regression. Our mass determination excludes an Earth-like composition with 98% confidence. Kepler-1655b falls on the upper edge of the evaporation valley, in the relatively sparsely occupied transition region between rocky and gas-rich planets. It is therefore part of a population of planets that we should actively seek to characterize further.

Small satellite debris catalog maintenance issues

NASA Technical Reports Server (NTRS)

Jackson, Phoebe A.

1991-01-01

The United States Space Command (USSPACECOM) is a unified command of the Department of Defense, and one of its tasks is to detect, track, identify, and maintain a catalog of all man-made objects in Earth orbit. This task is called space surveillance, and the most important tool for space surveillance is the satellite catalog. The command's reasons for performing satellite catalog maintenance is presented. A satellite catalog is described, and small satellite-debris catalog-maintenance issues are identified. The underlying rationale is to describe the catalog maintenance services so that the members of the community can use them with assurance.

Had the planet Mars not existed: Kepler's equant model and its physical consequences

NASA Astrophysics Data System (ADS)

Bracco, C.; Provost, J.-P.

2009-09-01

We examine the equant model for the motion of planets, which was the starting point of Kepler's investigations before he modified it because of Mars observations. We show that, up to first order in eccentricity, this model implies for each orbit a velocity, which satisfies Kepler's second law and Hamilton's hodograph, and a centripetal acceleration with an r-2 dependence on the distance to the Sun. If this dependence is assumed to be universal, Kepler's third law follows immediately. This elementary exercise in kinematics for undergraduates emphasizes the proximity of the equant model coming from ancient Greece with our present knowledge. It adds to its historical interest a didactical relevance concerning, in particular, the discussion of the Aristotelian or Newtonian conception of motion.

Direct measurement and calibration of the Kepler CCD Pixel Response Function for improved photometry and astrometry

NASA Astrophysics Data System (ADS)

Ninkov, Zoran

Stellar images taken with telescopes and detectors in space are usually undersampled, and to correct for this, an accurate pixel response function is required. The standard approach for HST and KEPLER has been to measure the telescope PSF combined ("convolved") with the actual pixel response function, super-sampled by taking into account dithered or offset observed images of many stars (Lauer [1999]). This combined response function has been called the "PRF" (Bryson et al. [2011]). However, using such results has not allowed astrometry from KEPLER to reach its full potential (Monet et al. [2010], [2014]). Given the precision of KEPLER photometry, it should be feasible to use a pre-determined detector pixel response function (PRF) and an optical point spread function (PSF) as separable quantities to more accurately correct photometry and astrometry for undersampling. Wavelength (i.e. stellar color) and instrumental temperature should be affecting each of these differently. Discussion of the PRF in the "KEPLER Instrument Handbook" is limited to an ad-hoc extension of earlier measurements on a quite different CCD. It is known that the KEPLER PSF typically has a sharp spike in the middle, and the main bulk of the PSF is still small enough to be undersampled, so that any substructure in the pixel may interact significantly with the optical PSF. Both the PSF and PRF are probably asymmetric. We propose to measure the PRF for an example of the CCD sensors used on KEPLER at sufficient sampling resolution to allow significant improvement of KEPLER photometry and astrometry, in particular allowing PSF fitting techniques to be used on the data archive.

Cataloging Practices in India: Efforts for Standardization.

ERIC Educational Resources Information Center

Tikku, Upinder Kumar

1984-01-01

Surveys current cataloging practices in Indian libraries and discusses standardization in cataloging, types of catalogs, cataloging codes (Anglo-American and Ranganathan), subject headings, descriptive cataloging, and standardization efforts (international, United States, USSR, Great Britain, India). Footnotes are included. (EJS)

Ensemble asteroseismology of solar-type stars with the NASA Kepler mission.

PubMed

Chaplin, W J; Kjeldsen, H; Christensen-Dalsgaard, J; Basu, S; Miglio, A; Appourchaux, T; Bedding, T R; Elsworth, Y; García, R A; Gilliland, R L; Girardi, L; Houdek, G; Karoff, C; Kawaler, S D; Metcalfe, T S; Molenda-Żakowicz, J; Monteiro, M J P F G; Thompson, M J; Verner, G A; Ballot, J; Bonanno, A; Brandão, I M; Broomhall, A-M; Bruntt, H; Campante, T L; Corsaro, E; Creevey, O L; Doğan, G; Esch, L; Gai, N; Gaulme, P; Hale, S J; Handberg, R; Hekker, S; Huber, D; Jiménez, A; Mathur, S; Mazumdar, A; Mosser, B; New, R; Pinsonneault, M H; Pricopi, D; Quirion, P-O; Régulo, C; Salabert, D; Serenelli, A M; Silva Aguirre, V; Sousa, S G; Stello, D; Stevens, I R; Suran, M D; Uytterhoeven, K; White, T R; Borucki, W J; Brown, T M; Jenkins, J M; Kinemuchi, K; Van Cleve, J; Klaus, T C

2011-04-08

In addition to its search for extrasolar planets, the NASA Kepler mission provides exquisite data on stellar oscillations. We report the detections of oscillations in 500 solar-type stars in the Kepler field of view, an ensemble that is large enough to allow statistical studies of intrinsic stellar properties (such as mass, radius, and age) and to test theories of stellar evolution. We find that the distribution of observed masses of these stars shows intriguing differences to predictions from models of synthetic stellar populations in the Galaxy.

Eta-Sub-Earth Projection from Kepler Data

NASA Technical Reports Server (NTRS)

Traub, Wesley A.

2012-01-01

Outline of talk: (1) The Kepler database (2) Biases (3) The radius distribution (4) The period distribution (5) Projecting from the sam ple to the population (6) Extrapolating the period distribution (7) The Habitable Zone (8) Calculating the number of terrestrial, HZ plan ets (10) Conclusions

VizieR Online Data Catalog: OCARS catalog second version (Malkin, 2016)

NASA Astrophysics Data System (ADS)

Malkin, Z. M.

2016-11-01

Unlike the first version, supported in 2007-2015, the second version of the OCARS catalog includes three files: ocars.txt is the main file containing the source coordinates, source types, redshifts, and approximate magnitudes, together with commentary; this file corresponds to the first version of the OCARS catalog; ocars_m.txt contains photometric data in the 13 uUBgV rRiIzJHK bands; ocars_n.txt contains a table of corresponding source names in various catalogs; currently, only cross-identifications with IVS programs4 and the LQAC catalog [9] are included; The list of objects included in the OCARS catalog is formed from various astrometric and geodeticVLBI programs and catalogs in the following order: - sources in the ICRF2 [2]; - other sources observed in the framework of IVS programs; - sources from the NASA Goddard VLBI group catalog5 ; - sources from the RFC catalog,6 which is the most complete astrometric catalog of radio sources, is updated each quarter, and contributed more than half the OCARS objects; the latest version of OCARS used the RFC-2016a catalog based on observations obtained in 1980-2015 as part of IVS and other radio astrometric programs [19-31]; - sources from the literature. Optical Characteristics of Astrometric Radio Sources (OCARS) ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Last revised: 27-NOV-2016 Latest update: - removed 30+ RFC sources not identified in NED and optics - removed rather long detailed statistics table, which seems to be not interested for most of users; it is always available on request - a few additions and amendments E-mail alerts about updates are available on request. URL of this file is http

Cataloger's Camera Chaos

ERIC Educational Resources Information Center

Farris, Robert C.

1974-01-01

A "cataloger's camera" to facilitate the reproduction of catalog card sets has been sought actively by librarians for more than two decades, never with complete success. Several of the latest library and commercial developments in the continuing quest for this elusive device are described briefly. (Author)

Kepler Planet Detection Metrics: Pixel-Level Transit Injection Tests of Pipeline Detection Efficiency for Data Release 25

NASA Technical Reports Server (NTRS)

Christiansen, Jessie L.

2017-01-01

This document describes the results of the fourth pixel-level transit injection experiment, which was designed to measure the detection efficiency of both the Kepler pipeline (Jenkins 2002, 2010; Jenkins et al. 2017) and the Robovetter (Coughlin 2017). Previous transit injection experiments are described in Christiansen et al. (2013, 2015a,b, 2016).In order to calculate planet occurrence rates using a given Kepler planet catalogue, produced with a given version of the Kepler pipeline, we need to know the detection efficiency of that pipeline. This can be empirically determined by injecting a suite of simulated transit signals into the Kepler data, processing the data through the pipeline, and examining the distribution of successfully recovered transits. This document describes the results for the pixel-level transit injection experiment performed to accompany the final Q1-Q17 Data Release 25 (DR25) catalogue (Thompson et al. 2017)of the Kepler Objects of Interest. The catalogue was generated using the SOC pipeline version 9.3 and the DR25 Robovetter acting on the uniformly processed Q1-Q17 DR25 light curves (Thompson et al. 2016a) and assuming the Q1-Q17 DR25 Kepler stellar properties (Mathur et al. 2017).

Assessing the Effect of Stellar Companions from High-resolution Imaging of Kepler Objects of Interest

NASA Astrophysics Data System (ADS)

Hirsch, Lea A.; Ciardi, David R.; Howard, Andrew W.; Everett, Mark E.; Furlan, Elise; Saylors, Mindy; Horch, Elliott P.; Howell, Steve B.; Teske, Johanna; Marcy, Geoffrey W.

2017-03-01

We report on 176 close (<2″) stellar companions detected with high-resolution imaging near 170 hosts of Kepler Objects of Interest (KOIs). These Kepler targets were prioritized for imaging follow-up based on the presence of small planets, so most of the KOIs in these systems (176 out of 204) have nominal radii <6 {R}\\oplus . Each KOI in our sample was observed in at least two filters with adaptive optics, speckle imaging, lucky imaging, or the Hubble Space Telescope. Multi-filter photometry provides color information on the companions, allowing us to constrain their stellar properties and assess the probability that the companions are physically bound. We find that 60%-80% of companions within 1″ are bound, and the bound fraction is >90% for companions within 0.″5 the bound fraction decreases with increasing angular separation. This picture is consistent with simulations of the binary and background stellar populations in the Kepler field. We also reassess the planet radii in these systems, converting the observed differential magnitudes to a contamination in the Kepler bandpass and calculating the planet radius correction factor, X R = R p (true)/R p (single). Under the assumption that planets in bound binaries are equally likely to orbit the primary or secondary, we find a mean radius correction factor for planets in stellar multiples of X R = 1.65. If stellar multiplicity in the Kepler field is similar to the solar neighborhood, then nearly half of all Kepler planets may have radii underestimated by an average of 65%, unless vetted using high-resolution imaging or spectroscopy.

Stubborn Mars is in search of a domicile. Johannes Kepler to Christian II. elector of Saxony - a rediscovery. (German Title: Der halsstarrige Mars sucht sich eine Wohnung. Johannes Kepler an Kurfürst Christian II. von Sachsen - Eine Wiederentdeckung)

NASA Astrophysics Data System (ADS)

Kothmann, Hella

2011-08-01

The rediscovery of a missing autograph of Johannes Kepler - a dedication letter presenting his "New Astronomy" to the elector of Saxony - was possible through a series of fortunate coincidences. Kepler's most important work "Astronomia Nova", in which he proclaimed the first two planetary laws, has been published at the end of 1609. According to the Latin dedication to emperor Rudolf II., Kepler compares the long period of calculations and observations as a crusade against the planet Mars. Finally he succeeds in defeating him, now he supports his opponent to find a new home. The letter is an extraordinary document of Kepler's ingenious and humorous language, it also proofs the relationship to Dresden and the Saxon court.

Systems engingeering for the Kepler Mission : a search for terrestrial planets

NASA Technical Reports Server (NTRS)

Duren, Riley M.; Dragon, Karen; Gunter, Steve Z.; Gautier, Nick; Koch, Dave; Harvey, Adam; Enos, Alan; Borucki, Bill; Sobeck, Charlie; Mayer, Dave;

High-resolution multi-band imaging for validation and characterization of small Kepler planets

DOE Office of Scientific and Technical Information (OSTI.GOV)

Everett, Mark E.; Silva, David R.; Barclay, Thomas

2015-02-01

High-resolution ground-based optical speckle and near-infrared adaptive optics images are taken to search for stars in close angular proximity to host stars of candidate planets identified by the NASA Kepler Mission. Neighboring stars are a potential source of false positive signals. These stars also blend into Kepler light curves, affecting estimated planet properties, and are important for an understanding of planets in multiple star systems. Deep images with high angular resolution help to validate candidate planets by excluding potential background eclipsing binaries as the source of the transit signals. A study of 18 Kepler Object of Interest stars hosting amore » total of 28 candidate and validated planets is presented. Validation levels are determined for 18 planets against the likelihood of a false positive from a background eclipsing binary. Most of these are validated at the 99% level or higher, including five newly validated planets in two systems: Kepler-430 and Kepler-431. The stellar properties of the candidate host stars are determined by supplementing existing literature values with new spectroscopic characterizations. Close neighbors of seven of these stars are examined using multi-wavelength photometry to determine their nature and influence on the candidate planet properties. Most of the close neighbors appear to be gravitationally bound secondaries, while a few are best explained as closely co-aligned field stars. Revised planet properties are derived for each candidate and validated planet, including cases where the close neighbors are the potential host stars.« less

Long-term Photometric Variability in Kepler Full-frame Images: Magnetic Cycles of Sun–like Stars

NASA Astrophysics Data System (ADS)

Montet, Benjamin T.; Tovar, Guadalupe; Foreman-Mackey, Daniel

2017-12-01

Photometry from the Kepler mission is optimized to detect small, short-duration signals like planet transits at the expense of long-term trends. This long-term variability can be recovered in photometry from the full-frame images (FFIs), a set of calibration data collected approximately monthly during the Kepler mission. Here we present f3, an open-source package to perform photometry on the Kepler FFIs in order to detect changes in the brightness of stars in the Kepler field of view over long time baselines. We apply this package to a sample of 4000 Sun–like stars with measured rotation periods. We find that ≈10% of these targets have long-term variability in their observed flux. For the majority of targets, we find that the luminosity variations are either correlated or anticorrelated with the short-term variability due to starspots on the stellar surface. We find a transition between anticorrelated (starspot-dominated) variability and correlated (facula-dominated) variability between rotation periods of 15 and 25 days, suggesting the transition between the two modes is complete for stars at the age of the Sun. We also identify a sample of stars with apparently complete cycles, as well as a collection of short-period binaries with extreme photometric variation over the Kepler mission.

Spacing of Kepler Planets: Sculpting by Dynamical Instability

NASA Astrophysics Data System (ADS)

Pu, Bonan; Wu, Yanqin

2015-07-01

We study the orbital architecture of multi-planet systems detected by the Kepler transit mission using N-body simulations, focusing on the orbital spacing between adjacent planets in systems showing four or more transiting planets. We find that the observed spacings are tightly clustered around 12 mutual Hill radii, when transit geometry and sensitivity limits are accounted for. In comparison, dynamical integrations reveal that the minimum spacing required for systems of similar masses to survive dynamical instability for as long as 1 billion yr is ∼10 if all orbits are circular and coplanar and ∼12 if planetary orbits have eccentricities of ∼0.02 (a value suggested by studies of planet transit-time variations). This apparent coincidence, between the observed spacing and the theoretical stability threshold, leads us to propose that typical planetary systems were formed with even tighter spacing, but most, except for the widest ones, have undergone dynamical instability, and are pared down to a more anemic version of their former selves, with fewer planets and larger spacings. So while the high-multiple systems (five or more transiting planets) are primordial systems that remain stable, the single or double planetary systems, abundantly discovered by the Kepler mission, may be the descendants of more closely packed high-multiple systems. If this hypothesis is correct, we infer that the formation environment of Kepler systems should be more dissipative than that of the terrestrial planets.

Kepler-423b: a half-Jupiter mass planet transiting a very old solar-like star

NASA Astrophysics Data System (ADS)

Gandolfi, D.; Parviainen, H.; Deeg, H. J.; Lanza, A. F.; Fridlund, M.; Prada Moroni, P. G.; Alonso, R.; Augusteijn, T.; Cabrera, J.; Evans, T.; Geier, S.; Hatzes, A. P.; Holczer, T.; Hoyer, S.; Kangas, T.; Mazeh, T.; Pagano, I.; Tal-Or, L.; Tingley, B.

2015-04-01

We report the spectroscopic confirmation of the Kepler object of interest KOI-183.01 (Kepler-423b), a half-Jupiter mass planet transiting an old solar-like star every 2.7 days. Our analysis is the first to combine the full Kepler photometry (quarters 1-17) with high-precision radial velocity measurements taken with the FIES spectrograph at the Nordic Optical Telescope. We simultaneously modelled the photometric and spectroscopic data-sets using Bayesian approach coupled with Markov chain Monte Carlo sampling. We found that the Kepler pre-search data conditioned light curve of Kepler-423 exhibits quarter-to-quarter systematic variations of the transit depth, with a peak-to-peak amplitude of ~4.3% and seasonal trends reoccurring every four quarters. We attributed these systematics to an incorrect assessment of the quarterly variation of the crowding metric. The host star Kepler-423 is a G4 dwarf with M⋆ = 0.85 ± 0.04 M⊙, R⋆ = 0.95 ± 0.04 R⊙, Teff= 5560 ± 80 K, [M/H] = - 0.10 ± 0.05 dex, and with an age of 11 ± 2 Gyr. The planet Kepler-423b has a mass of Mp= 0.595 ± 0.081MJup and a radius of Rp= 1.192 ± 0.052RJup, yielding a planetary bulk density of ρp = 0.459 ± 0.083 g cm-3. The radius of Kepler-423b is consistent with both theoretical models for irradiated coreless giant planets and expectations based on empirical laws. The inclination of the stellar spin axis suggests that the system is aligned along the line of sight. We detected a tentative secondary eclipse of the planet at a 2σ confidence level (ΔFec = 14.2 ± 6.6 ppm) and found that the orbit might have asmall non-zero eccentricity of 0.019+0.028-0.014. With a Bond albedo of AB = 0.037 ± 0.019, Kepler-423b is one of the gas-giant planets with the lowest albedo known so far. Based on observations obtained with the Nordic Optical Telescope, operated on the island of La Palma jointly by Denmark, Finland, Iceland, Norway, and Sweden, in the Spanish Observatorio del Roque de los Muchachos of

Online Catalogs and Their Users.

ERIC Educational Resources Information Center

Broadus, Robert N.

1983-01-01

Review of research on online public access catalogs sponsored by Council on Library Resources notes the scope and method (questionnaires administered to catalog users and nonusers in 29 participating institutions) and findings and applications (including organizational setting and computer system, catalog use and satisfaction, and implications).…

Instructing the Online Catalog User.

ERIC Educational Resources Information Center

Miller, William

1986-01-01

This essay offers suggestions to make online public access catalogs (OPACs) less idiosyncratic and more usable. Discussion covers qualitative difference between online catalog and predecessors, challenge of debunking assumptions, skills for success, maintaining an instructional perspective, catalog development for the people by the people, and the…

ACTIVITY ANALYSES FOR SOLAR-TYPE STARS OBSERVED WITH KEPLER. I. PROXIES OF MAGNETIC ACTIVITY

DOE Office of Scientific and Technical Information (OSTI.GOV)

He, Han; Wang, Huaning; Yun, Duo, E-mail: hehan@nao.cas.cn

2015-11-15

Light curves of solar-type stars often show gradual fluctuations due to rotational modulation by magnetic features (starspots and faculae) on stellar surfaces. Two quantitative measures of modulated light curves are employed as the proxies of magnetic activity for solar-type stars observed with Kepler telescope. The first is named autocorrelation index i{sub AC}, which describes the degree of periodicity of the light curve; the second is the effective fluctuation range of the light curve R{sub eff}, which reflects the depth of rotational modulation. The two measures are complementary and depict different aspects of magnetic activities on solar-type stars. By using themore » two proxies i{sub AC} and R{sub eff}, we analyzed activity properties of two carefully selected solar-type stars observed with Kepler (Kepler ID: 9766237 and 10864581), which have distinct rotational periods (14.7 versus 6.0 days). We also applied the two measures to the Sun for a comparative study. The result shows that both the measures can reveal cyclic activity variations (referred to as i{sub AC}-cycle and R{sub eff}-cycle) on the two Kepler stars and the Sun. For the Kepler star with the faster rotation rate, i{sub AC}-cycle and R{sub eff}-cycle are in the same phase, while for the Sun (slower rotator), they are in the opposite phase. By comparing the solar light curve with simultaneous photospheric magnetograms, it is identified that the magnetic feature that causes the periodic light curve during solar minima is the faculae of the enhanced network region, which can also be a candidate of magnetic features that dominate the periodic light curves on the two Kepler stars.« less

DISCOVERY AND ATMOSPHERIC CHARACTERIZATION OF GIANT PLANET KEPLER-12b: AN INFLATED RADIUS OUTLIER

DOE Office of Scientific and Technical Information (OSTI.GOV)

Fortney, Jonathan J.; Nutzman, Philip; Demory, Brice-Olivier

We report the discovery of planet Kepler-12b (KOI-20), which at 1.695 {+-} 0.030 R{sub J} is among the handful of planets with super-inflated radii above 1.65 R{sub J}. Orbiting its slightly evolved G0 host with a 4.438 day period, this 0.431 {+-} 0.041 M{sub J} planet is the least irradiated within this largest-planet-radius group, which has important implications for planetary physics. The planet's inflated radius and low mass lead to a very low density of 0.111 {+-} 0.010 g cm{sup -3}. We detect the occultation of the planet at a significance of 3.7{sigma} in the Kepler bandpass. This yields amore » geometric albedo of 0.14 {+-} 0.04; the planetary flux is due to a combination of scattered light and emitted thermal flux. We use multiple observations with Warm Spitzer to detect the occultation at 7{sigma} and 4{sigma} in the 3.6 and 4.5 {mu}m bandpasses, respectively. The occultation photometry timing is consistent with a circular orbit at e < 0.01 (1{sigma}) and e < 0.09 (3{sigma}). The occultation detections across the three bands favor an atmospheric model with no dayside temperature inversion. The Kepler occultation detection provides significant leverage, but conclusions regarding temperature structure are preliminary, given our ignorance of opacity sources at optical wavelengths in hot Jupiter atmospheres. If Kepler-12b and HD 209458b, which intercept similar incident stellar fluxes, have the same heavy-element masses, the interior energy source needed to explain the large radius of Kepler-12b is three times larger than that of HD 209458b. This may suggest that more than one radius-inflation mechanism is at work for Kepler-12b or that it is less heavy-element rich than other transiting planets.« less

The Kepler-10 planetary system revisited by HARPS-N: A hot rocky world and a solid Neptune-mass planet

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dumusque, Xavier; Buchhave, Lars A.; Latham, David W.

Kepler-10b was the first rocky planet detected by the Kepler satellite and confirmed with radial velocity follow-up observations from Keck-HIRES. The mass of the planet was measured with a precision of around 30%, which was insufficient to constrain models of its internal structure and composition in detail. In addition to Kepler-10b, a second planet transiting the same star with a period of 45 days was statistically validated, but the radial velocities were only good enough to set an upper limit of 20 M{sub ⊕} for the mass of Kepler-10c. To improve the precision on the mass for planet b, themore » HARPS-N Collaboration decided to observe Kepler-10 intensively with the HARPS-N spectrograph on the Telescopio Nazionale Galileo on La Palma. In total, 148 high-quality radial-velocity measurements were obtained over two observing seasons. These new data allow us to improve the precision of the mass determination for Kepler-10b to 15%. With a mass of 3.33 ± 0.49 M{sub ⊕} and an updated radius of 1.47{sub −0.02}{sup +0.03} R{sub ⊕}, Kepler-10b has a density of 5.8 ± 0.8 g cm{sup –3}, very close to the value predicted by models with the same internal structure and composition as the Earth. We were also able to determine a mass for the 45-day period planet Kepler-10c, with an even better precision of 11%. With a mass of 17.2 ± 1.9 M{sub ⊕} and radius of 2.35{sub −0.04}{sup +0.09} R{sub ⊕}, Kepler-10c has a density of 7.1 ± 1.0 g cm{sup –3}. Kepler-10c appears to be the first strong evidence of a class of more massive solid planets with longer orbital periods.« less

RADIAL VELOCITY MONITORING OF KEPLER HEARTBEAT STARS

DOE Office of Scientific and Technical Information (OSTI.GOV)

Shporer, Avi; Fuller, Jim; Isaacson, Howard

2016-09-20

Heartbeat stars (HB stars) are a class of eccentric binary stars with close periastron passages. The characteristic photometric HB signal evident in their light curves is produced by a combination of tidal distortion, heating, and Doppler boosting near orbital periastron. Many HB stars continue to oscillate after periastron and along the entire orbit, indicative of the tidal excitation of oscillation modes within one or both stars. These systems are among the most eccentric binaries known, and they constitute astrophysical laboratories for the study of tidal effects. We have undertaken a radial velocity (RV) monitoring campaign of Kepler HB stars inmore » order to measure their orbits. We present our first results here, including a sample of 22 Kepler HB systems, where for 19 of them we obtained the Keplerian orbit and for 3 other systems we did not detect a statistically significant RV variability. Results presented here are based on 218 spectra obtained with the Keck/HIRES spectrograph during the 2015 Kepler observing season, and they have allowed us to obtain the largest sample of HB stars with orbits measured using a single instrument, which roughly doubles the number of HB stars with an RV measured orbit. The 19 systems measured here have orbital periods from 7 to 90 days and eccentricities from 0.2 to 0.9. We show that HB stars draw the upper envelope of the eccentricity–period distribution. Therefore, HB stars likely represent a population of stars currently undergoing high eccentricity migration via tidal orbital circularization, and they will allow for new tests of high eccentricity migration theories.« less

The Kepler Mission on Two Reaction Wheels is K2

NASA Astrophysics Data System (ADS)

Haas, Michael R.; Barclay, T.; Batalha, N. M.; Bryson, S.; Caldwell, D. A.; Campbell, J.; Coughlin, J.; Howell, S. B.; Jenkins, J. M.; Klaus, T. C.; Mullally, F.; Sanderfer, D. T.; Sobeck, C. K.; Still, M. D.; Troeltzsch, J.; Twicken, J. D.

2014-01-01

Although data collection for the original Kepler mission is complete, a repurposed Kepler has the potential to discover many hundreds of new, small exoplanets around low-mass stars located in or near the ecliptic plane. This repurposing of the Kepler spacecraft, dubbed “K2,” seeks to maximize photometric performance using its two operational reaction wheels by observing in the ecliptic plane where solar torques can be carefully balanced to minimize boresight roll. The K2 mission shows great promise and, once approved, will observe many different fields during a sequence of two- to three-month campaigns over the next few years. Like the original Kepler mission, K2 has many challenges, but is anticipated to be well worth the climb scientifically. K2 can observe many thousands of new sources during each campaign and hundreds of thousands of new sources over its lifetime. In addition to its continued search for exoplanets, the K2 mission will provide access to a wide variety of scientifically interesting targets that include young and variable stars, open clusters of differing ages, star-forming regions, supernovae, white dwarfs, microlensing events, solar system objects, AGNs, normal galaxies, and the Galactic Center. Performance testing began in September, 2013, and has continued throughout the fall and early winter. The results of the first ecliptic-plane tests are described and used to predict photometric performance. A trade study reveals the likely number of targets, cadence durations, initial fields of view, and planned observing strategies. K2 is an exciting new mission that addresses a wide variety of scientific questions with expanded opportunities for community participation.

LAMOST OBSERVATIONS IN THE KEPLER FIELD: SPECTRAL CLASSIFICATION WITH THE MKCLASS CODE

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gray, R. O.; Corbally, C. J.; Cat, P. De

2016-01-15

The LAMOST-Kepler project was designed to obtain high-quality, low-resolution spectra of many of the stars in the Kepler field with the Large Sky Area Multi Object Fiber Spectroscopic Telescope (LAMOST) spectroscopic telescope. To date 101,086 spectra of 80,447 objects over the entire Kepler field have been acquired. Physical parameters, radial velocities, and rotational velocities of these stars will be reported in other papers. In this paper we present MK spectral classifications for these spectra determined with the automatic classification code MKCLASS. We discuss the quality and reliability of the spectral types and present histograms showing the frequency of the spectralmore » types in the main table organized according to luminosity class. Finally, as examples of the use of this spectral database, we compute the proportion of A-type stars that are Am stars, and identify 32 new barium dwarf candidates.« less

A Bayesian Approach to Systematic Error Correction in Kepler Photometric Time Series

NASA Astrophysics Data System (ADS)

Jenkins, Jon Michael; VanCleve, J.; Twicken, J. D.; Smith, J. C.; Kepler Science Team

2011-01-01

In order for the Kepler mission to achieve its required 20 ppm photometric precision for 6.5 hr observations of 12th magnitude stars, the Presearch Data Conditioning (PDC) software component of the Kepler Science Processing Pipeline must reduce systematic errors in flux time series to the limit of stochastic noise for errors with time-scales less than three days, without smoothing or over-fitting away the transits that Kepler seeks. The current version of PDC co-trends against ancillary engineering data and Pipeline generated data using essentially a least squares (LS) approach. This approach is successful for quiet stars when all sources of systematic error have been identified. If the stars are intrinsically variable or some sources of systematic error are unknown, LS will nonetheless attempt to explain all of a given time series, not just the part the model can explain well. Negative consequences can include loss of astrophysically interesting signal, and injection of high-frequency noise into the result. As a remedy, we present a Bayesian Maximum A Posteriori (MAP) approach, in which a subset of intrinsically quiet and highly-correlated stars is used to establish the probability density function (PDF) of robust fit parameters in a diagonalized basis. The PDFs then determine a "reasonable” range for the fit parameters for all stars, and brake the runaway fitting that can distort signals and inject noise. We present a closed-form solution for Gaussian PDFs, and show examples using publically available Quarter 1 Kepler data. A companion poster (Van Cleve et al.) shows applications and discusses current work in more detail. Kepler was selected as the 10th mission of the Discovery Program. Funding for this mission is provided by NASA, Science Mission Directorate.

Catalogers and Competition.

ERIC Educational Resources Information Center

Howden, Norman

1987-01-01

Reports the results of a literature review and a survey of catalogers which were conducted to study the problem of the decline in quantity and quality of applications for entry-level cataloging jobs. Factors studied included: competition between types of library professionals, automation, library education, the women's movement, and library…

ECOL Book Catalog.

ERIC Educational Resources Information Center

Minneapolis Public Library, Minn. Environmental Conservation Library.

This catalog represents the collection of the Environmental Conservation Library oF Minnesota (ECOL) as of September 1973, when it contained over 2,800 titles of books and government documents, augmented by periodicals and substantial numbers of pamphlets, papers, brochures, and related materials. The catalog includes an author and main entry…

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gaidos, Eric, E-mail: gaidos@hawaii.edu

A key goal of the Kepler mission is the discovery of Earth-size transiting planets in ''habitable zones'' where stellar irradiance maintains a temperate climate on an Earth-like planet. Robust estimates of planet radius and irradiance require accurate stellar parameters, but most Kepler systems are faint, making spectroscopy difficult and prioritization of targets desirable. The parameters of 2035 host stars were estimated by Bayesian analysis and the probabilities p{sub HZ} that 2738 candidate or confirmed planets orbit in the habitable zone were calculated. Dartmouth Stellar Evolution Program models were compared to photometry from the Kepler Input Catalog, priors for stellar mass,more » age, metallicity and distance, and planet transit duration. The analysis yielded probability density functions for calculating confidence intervals of planet radius and stellar irradiance, as well as p{sub HZ}. Sixty-two planets have p{sub HZ} > 0.5 and a most probable stellar irradiance within habitable zone limits. Fourteen of these have radii less than twice the Earth; the objects most resembling Earth in terms of radius and irradiance are KOIs 2626.01 and 3010.01, which orbit late K/M-type dwarf stars. The fraction of Kepler dwarf stars with Earth-size planets in the habitable zone ({eta}{sub Circled-Plus }) is 0.46, with a 95% confidence interval of 0.31-0.64. Parallaxes from the Gaia mission will reduce uncertainties by more than a factor of five and permit definitive assignments of transiting planets to the habitable zones of Kepler stars.« less

"Cosmomorphistic geometry" in the unconscious geometry of Johannes Kepler

NASA Astrophysics Data System (ADS)

Adam, Adolf

Some mathematical aspects of the Music theory by Johannes Kepler are discussed, paying a special attention to the book "De harmonice mundi". Other scientists interested in Music theory are mentioned throughout the paper: The Pythagorean school, Klaudios Ptolemaios, Leonard Euler, Gottfried Wilhelm Leibniz, Christian von Goldbach, Hermann Ludwig Ferdinand von Helmholz, Karl Friedrich Gauss. The relation with the ancient chinese schools of cosmography has been discussed: From the the Pythagorean to the ancient Chinese schools of cosmography we find arithmo-geometrical applications of numbers which are emblematic, hold meaning or represent the essence of things, the author writes. It was Johannes Kepler who taught us this "transconstructive method" of forming classical and ancient begginings of structuralistic thinking into a system from which deductions can readily be made.

Kepler Data Release 25 Notes (Q0-Q17)

NASA Technical Reports Server (NTRS)

Mullally, Susan E.; Caldwell, Douglas A.; Barclay, Thomas Stewart; Barentsen, Geert; Clarke, Bruce Donald; Bryson, Stephen T.; Burke, Christopher James; Campbell, Jennifer Roseanna; Catanzarite, Joseph H.; Christiansen, Jessie;

Catalog of War Games

DTIC Science & Technology

1992-10-09

PROGRAM CATALOG OF WAR GAMES 92-30805 U *3fl91\\k~o 9 2 SECURITY CLASSIFICATION OF THIS PAGE I ,i REPORT DOCUMENTATION PAGE la. REPORT SECURITY...4401 Ford Ave ELEMENT NO. NO. NO. ACCESSION NO. AIyxndriA. VA 229i2-14O1 --. 11. TITLE (Include Security Classification) Catalog of War Games 12...SCURITY CLASSIFICATiON OF THIS PAGE DECLARATION OF ACCORD 1. PURPOSE This catalog provides information on the primary war games , combat simulations