Three Principles of Perception for Instructional Interface Design.

ERIC Educational Resources Information Center

Lohr, Linda L.

2000-01-01

Discusses graphical user interfaces used for instructional purposes in educational environments, which promote learning goals, and in support environments, which promote performance goals. Explains three key principles of perception and gives guidelines for their use, including the figure/ground principle, the hierarchy principle, and the gestalt…

Nine key principles to guide youth mental health: development of service models in New South Wales.

PubMed

Howe, Deborah; Batchelor, Samantha; Coates, Dominiek; Cashman, Emma

2014-05-01

Historically, the Australian health system has failed to meet the needs of young people with mental health problems and mental illness. In 2006, New South Wales (NSW) Health allocated considerable funds to the reform agenda of mental health services in NSW to address this inadequacy. Children and Young People's Mental Health (CYPMH), a service that provides mental health care for young people aged 12-24 years, with moderate to severe mental health problems, was chosen to establish a prototype Youth Mental Health (YMH) Service Model for NSW. This paper describes nine key principles developed by CYPMH to guide the development of YMH Service Models in NSW. A literature review, numerous stakeholder consultations and consideration of clinical best practice were utilized to inform the development of the key principles. Subsequent to their development, the nine key principles were formally endorsed by the Mental Health Program Council to ensure consistency and monitor the progress of YMH services across NSW. As a result, between 2008 and 2012 YMH Services across NSW regularly reported on their activities against each of the nine key principles demonstrating how each principle was addressed within their service. The nine key principles provide mental health services a framework for how to reorient services to accommodate YMH and provide a high-quality model of care. [Corrections added on 29 November 2013, after first online publication: The last two sentences of the Results section have been replaced with "As a result, between 2008 and 2012 YMH Services across NSW regularly reported on their activities against each of the nine key principles demonstrating how each principle was addressed within their service."]. © 2013 Wiley Publishing Asia Pty Ltd.

Using Green Chemistry and Engineering Principles to Design ...

EPA Pesticide Factsheets

The concepts of green chemistry and engineering (GC&E) have been promoted as an effective qualitative framework for developing more sustainable chemical syntheses, processes, and material management techniques. This has been demonstrated by many theoretical and practical cases. In addition, there are several approaches and frameworks focused on demonstrating that improvements were achieved through GC&E technologies. However, the application of these principles is not always straightforward. We propose using systematic frameworks and tools that help practitioners when deciding which principles can be applied, the levels of implementation, prospective of obtaining simultaneous improvements in all sustainability aspects, and ways to deal with multiobjective problems. Therefore, this contribution aims to provide a systematic combination of three different and complementary design tools for assisting designers in evaluating, developing, and improving chemical manufacturing and material management systems under GC&E perspectives. The WAR Algorithm, GREENSCOPE, and SustainPro were employed for this synergistic approach of incorporating sustainability at early stages of process development. In this demonstration, simulated ammonia production is used as a case study to illustrate this advancement. Results show how to identify process design areas for improvements, key factors, multi-criteria decision-making solutions, and optimal tradeoffs. Finally, conclusions were pre

Computing design principles for robotic telescopes

NASA Astrophysics Data System (ADS)

Bowman, Mark K.; Ford, Martyn J.; Lett, Robert D. J.; McKay, Derek J.; Mücke-Herzberg, Dorothy; Norbury, Martin A.

2002-12-01

Telescopes capable of making observing decisions independent of human supervision have become a reality in the 21st century. These new telescopes are likely to replace automated systems as the telescopes of choice. A fully robotic implementation offers not only reduced operating costs, but also significant gains in scientific output over automated or remotely operated systems. The design goals are to maximise the telescope operating time and minimise the cost of diagnosis and repair. However, the demands of a robotic telescope greatly exceed those of its remotely operated counterpart, and the design of the computing system is key to its operational performance. This paper outlines the challenges facing the designer of these computing systems, and describes some of the principles of design which may be applied. Issues considered include automatic control and efficiency, system awareness, robustness and reliability, access, security and safety, as well as ease-of-use and maintenance. These requirements cannot be considered simply within the context of the application software. Hence, this paper takes into account operating system, hardware and environmental issues. Consideration is also given to accommodating different levels of manual control within robotic telescopes, as well as methods of accessing and overriding the system in the event of failure.

Tailoring and Critical Thinking - Key Principles for Acquisition Success

DTIC Science & Technology

2015-10-01

Defense AT&L: September–October 2015 6 Tailoring and Critical Thinking— Key Principles for Acquisition Success Mike Kotzian, D.M. n Michael Paul...well as program success . 7 Defense AT&L: September–October 2015 The Long Range Anti-Ship Missile Opportunity To ensure DARPA maintains its ability... successful flight demonstra- tions that initially proved the technical approach. Concurrent with these technical accomplishments came two important

Utilization of Design Principles for Hybrid Learning Configurations by Interprofessional Design Teams

ERIC Educational Resources Information Center

Cremers, Petra H. M.; Wals, Arjen E. J.; Wesselink, Renate; Mulder, Martin

2017-01-01

Educational design research yields design knowledge, often in the form of design principles or guidelines that provide the rationale or "know-why" for the design of educational interventions. As such, design principles can be utilized by designers in contexts other than the research context in which they were generated. Although research…

Using Design Principles to Teach Technical Communication.

ERIC Educational Resources Information Center

Markel, Mike

1995-01-01

Compares the writing of two students--a competent writer and a weak one--in a technical communication course before and after discussion of design principles. Finds that a basic understanding of design principles helped them improve document macrostructure but had little effect on document microstructure. Suggests that integrating document design…

The new international certification and design principles

DOE Office of Scientific and Technical Information (OSTI.GOV)

Heijnen, W.H.P.M.; Heineman, H.

1995-12-01

ISO/TC 67 deals with standardization of Equipment for the Petroleum and Natural Gas Industries at a global level. The paper will provide the reader with insight in the Certification system as well as its link with Design. It will explain how the total process fits in the business structure of the Petroleum and Natural Gas Industry, with the focus on the emerging concepts such as partnering, turn key contracts, the developments in the EC and the need to reduce costs at a global basis. The paper will also address the topic of Design Principles based on the results of themore » study performed for ISO/TC 67. The paper will provide a framework that can be used by the industry in how to deal with issues such as, there shall the activity of the Operator be focused on when ordering equipment or services and how the manufacturer or service provider should prepare himself to become an equal partner with regard to the required equipment, service and its associated technology now and in the future. In the changing world with ever increasing focus on Health, Safety and Environment (HSE), the topic efficiency, technology, equipment performance and functionality should not be overlooked or been given less attention. The Certification and Design principles, implemented in standards, aim predominantly at Fitness for Purpose of equipment and/or services to regain the balance. A further aim is to limit consequential costs due to deficiencies in the broadest sense, allowing the Petroleum and Natural Gas Industry to produce oil and gas in a cost effective manner with the highest possible HSE targets.« less

Seeing is believing: good graphic design principles for medical research.

PubMed

Duke, Susan P; Bancken, Fabrice; Crowe, Brenda; Soukup, Mat; Botsis, Taxiarchis; Forshee, Richard

2015-09-30

Have you noticed when you browse a book, journal, study report, or product label how your eye is drawn to figures more than to words and tables? Statistical graphs are powerful ways to transparently and succinctly communicate the key points of medical research. Furthermore, the graphic design itself adds to the clarity of the messages in the data. The goal of this paper is to provide a mechanism for selecting the appropriate graph to thoughtfully construct quality deliverables using good graphic design principles. Examples are motivated by the efforts of a Safety Graphics Working Group that consisted of scientists from the pharmaceutical industry, Food and Drug Administration, and academic institutions. Copyright © 2015 John Wiley & Sons, Ltd.

Design principles for nickel-hydrogen cells and batteries

NASA Technical Reports Server (NTRS)

Thaller, L. H.; Manzo, M. A.; Gonzalez-Sanabria, O. D.

1985-01-01

Nickel-hydrogen cells and, more recently, bipolar batteries have been built by a variety of organizations. The design principles that have been used by the technology group at the NASA Lewis Research Center draw upon their extensive background in separator technology, alkaline fuel cell technology, and several alkaline cell technology areas. These design principles have been incorporated into both the more contemporary individual pressure vessel (IPV) designs that were pioneered by other groups, as well as the more recent bipolar battery designs using active cooling that are being developed at NASA Lewis Research Center and under contract. These principles are rather straightforward applications of capillary force formalisms, coupled with the slowly developing data base resulting from careful post test analyses. The objective of this overall effort is directed towards the low-Earth-orbit (LEO) application where the cycle life requirements are much more severe than the geosynchronous-orbit (GEO) application. A summary of the design principles employed is presented along with a discussion of the recommendations for component pore sizes and pore size distributions, as well as suggested materials of construction. These will be made based on our experience in these areas to show how these design principles have been translated into operating hardware.

Design principles for nickel-hydrogen cells and batteries

NASA Technical Reports Server (NTRS)

Thaller, L. H.; Manzo, M. A.; Gonzalez-Sanabria, O. D.

1985-01-01

Nickel-hydrogen cells and, more recently, bipolar batteries have been built by a variety of organizations. The design principles that have been used by the technology group at the NASA Lewis Research Center draw upon their extensive background in separator technology, alkaline fuel cell technology, and several alkaline cell technology areas. These design principles have been incorporated into both the more contemporary individual pressure vessel (IPV) designs that were pioneered by other groups, as well as the more recent bipolar battery designs using active cooling that are being developed at NASA Lewis Research Center and under contract. These principles are rather straightforward applications of capillary force formalisms, coupled with the slowly developing data base resulting from careful post test analyses. The objective of this overall effort is directed towards the low-earth-orbit (LEO) application where the cycle life requirements are much more severe than the geosynchronous-orbit (GEO) application. A summary of the design principles employed is presented along with a discussion of the recommendations for component pore sizes and pore size distributions, as well as suggested materials of construction. These will be made based on our experience in these areas to show how these design principles have been translated into operating hardware.

Design principles for enhancing phase sensitivity and suppressing phase fluctuations simultaneously in biochemical oscillatory systems.

PubMed

Fei, Chenyi; Cao, Yuansheng; Ouyang, Qi; Tu, Yuhai

2018-04-12

Biological systems need to function accurately in the presence of strong noise and at the same time respond sensitively to subtle external cues. Here we study design principles in biochemical oscillatory circuits to achieve these two seemingly incompatible goals. We show that energy dissipation can enhance phase sensitivity linearly by driving the phase-amplitude coupling and increase timing accuracy by suppressing phase diffusion. Two general design principles in the key underlying reaction loop formed by two antiparallel pathways are found to optimize oscillation performance with a given energy budget: balancing the forward-to-backward flux ratio between the two pathways to reduce phase diffusion and maximizing the net flux of the phase-advancing pathway relative to that of the phase-retreating pathway to enhance phase sensitivity. Experimental evidences consistent with these design principles are found in the circadian clock of cyanobacteria. Future experiments to test the predicted dependence of phase sensitivity on energy dissipation are proposed.

Toward instructional design principles: Inducing Faraday's law with contrasting cases

NASA Astrophysics Data System (ADS)

Kuo, Eric; Wieman, Carl E.

2016-06-01

Although physics education research (PER) has improved instructional practices, there are not agreed upon principles for designing effective instructional materials. Here, we illustrate how close comparison of instructional materials could support the development of such principles. Specifically, in discussion sections of a large, introductory physics course, a pair of studies compare two instructional strategies for teaching a physics concept: having students (i) explain a set of contrasting cases or (ii) apply and build on previously learned concepts. We compare these strategies for the teaching of Faraday's law, showing that explaining a set of related contrasting cases not only improves student performance on Faraday's law questions over building on a previously learned concept (i.e., Lorentz force), but also prepares students to better learn subsequent topics, such as Lenz's law. These differences persist to the final exam. We argue that early exposure to contrasting cases better focuses student attention on a key feature related to both concepts: change in magnetic flux. Importantly, the benefits of contrasting cases for both learning and enjoyment are enhanced for students who did not first attend a Faraday's law lecture, consistent with previous research suggesting that being told a solution can circumvent the benefits of its discovery. These studies illustrate an experimental approach for understanding how the structure of activities affects learning and performance outcomes, a first step toward design principles for effective instructional materials.

Design principles for solid-state lithium superionic conductors.

PubMed

Wang, Yan; Richards, William Davidson; Ong, Shyue Ping; Miara, Lincoln J; Kim, Jae Chul; Mo, Yifei; Ceder, Gerbrand

2015-10-01

Lithium solid electrolytes can potentially address two key limitations of the organic electrolytes used in today's lithium-ion batteries, namely, their flammability and limited electrochemical stability. However, achieving a Li(+) conductivity in the solid state comparable to existing liquid electrolytes (>1 mS cm(-1)) is particularly challenging. In this work, we reveal a fundamental relationship between anion packing and ionic transport in fast Li-conducting materials and expose the desirable structural attributes of good Li-ion conductors. We find that an underlying body-centred cubic-like anion framework, which allows direct Li hops between adjacent tetrahedral sites, is most desirable for achieving high ionic conductivity, and that indeed this anion arrangement is present in several known fast Li-conducting materials and other fast ion conductors. These findings provide important insight towards the understanding of ionic transport in Li-ion conductors and serve as design principles for future discovery and design of improved electrolytes for Li-ion batteries.

Incorporating café design principles into End-of-Life discussions: an innovative method for continuing education.

PubMed

Kanaskie, Mary Louise

2011-04-01

Café design provides an innovative method for conducting continuing education activities. This method was chosen to elicit meaningful conversation based on issues related to End-of-Life care. Café design principles incorporate the following: setting the context, creating hospitable space, exploring questions that matter, encouraging everyone's contributions, connecting diverse perspectives, listening together for insights, and sharing collective discoveries. Key discussion questions were identified from the End-of Life Nursing Education Consortium Core Curriculum. Questions were revised to incorporate the principles of appreciative inquiry, which encourage a shift from traditional methods of problem identification to creation of a positive vision. Participants rated the café design method as an effective way to share their ideas and to stimulate conversation.

Applying multimedia design principles enhances learning in medical education.

PubMed

Issa, Nabil; Schuller, Mary; Santacaterina, Susan; Shapiro, Michael; Wang, Edward; Mayer, Richard E; DaRosa, Debra A

2011-08-01

The Association of American Medical Colleges' Institute for Improving Medical Education's report entitled 'Effective Use of Educational Technology' called on researchers to study the effectiveness of multimedia design principles. These principles were empirically shown to result in superior learning when used with college students in laboratory studies, but have not been studied with undergraduate medical students as participants. A pre-test/post-test control group design was used, in which the traditional-learning group received a lecture on shock using traditionally designed slides and the modified-design group received the same lecture using slides modified in accord with Mayer's principles of multimedia design. Participants included Year 3 medical students at a private, midwestern medical school progressing through their surgery clerkship during the academic year 2009-2010. The medical school divides students into four groups; each group attends the surgery clerkship during one of the four quarters of the academic year. Students in the second and third quarters served as the modified-design group (n=91) and students in the fourth-quarter clerkship served as the traditional-design group (n=39). Both student cohorts had similar levels of pre-lecture knowledge. Both groups showed significant improvements in retention (p<0.0001), transfer (p<0.05) and total scores (p<0.0001) between the pre- and post-tests. Repeated-measures anova analysis showed statistically significant greater improvements in retention (F=10.2, p=0.0016) and total scores (F=7.13, p=0.0081) for those students instructed using principles of multimedia design compared with those instructed using the traditional design. Multimedia design principles are easy to implement and result in improved short-term retention among medical students, but empirical research is still needed to determine how these principles affect transfer of learning. Further research on applying the principles of multimedia

Mechatronics design principles for biotechnology product development.

PubMed

Mandenius, Carl-Fredrik; Björkman, Mats

2010-05-01

Traditionally, biotechnology design has focused on the manufacture of chemicals and biologics. Still, a majority of biotechnology products that appear on the market today is the result of mechanical-electric (mechatronic) construction. For these, the biological components play decisive roles in the design solution; the biological entities are either integral parts of the design, or are transformed by the mechatronic system. This article explains how the development and production engineering design principles used for typical mechanical products can be adapted to the demands of biotechnology products, and how electronics, mechanics and biology can be integrated more successfully. We discuss three emerging areas of biotechnology in which mechatronic design principles can apply: stem cell manufacture, artificial organs, and bioreactors. Copyright 2010 Elsevier Ltd. All rights reserved.

An Exploratory Review of Design Principles in Constructivist Gaming Learning Environments

ERIC Educational Resources Information Center

Rosario, Roberto A. Munoz; Widmeyer, George R.

2009-01-01

Creating a design theory for Constructivist Gaming Learning Environment necessitates, among other things, the establishment of design principles. These principles have the potential to help designers produce games, where users achieve higher levels of learning. This paper focuses on twelve design principles: Probing, Distributed, Multiple Routes,…

Enhancing the Therapy Experience Using Principles of Video Game Design.

PubMed

Folkins, John Wm; Brackenbury, Tim; Krause, Miriam; Haviland, Allison

2016-02-01

This article considers the potential benefits that applying design principles from contemporary video games may have on enhancing therapy experiences. Six principles of video game design are presented, and their relevance for enriching clinical experiences is discussed. The motivational and learning benefits of each design principle have been discussed in the education literature as having positive impacts on student motivation and learning and are related here to aspects of clinical practice. The essential experience principle suggests connecting all aspects of the experience around a central emotion or cognitive connection. The discovery principle promotes indirect learning in focused environments. The risk-taking principle addresses the uncertainties clients face when attempting newly learned skills in novel situations. The generalization principle encourages multiple opportunities for skill transfer. The reward system principle directly relates to the scaffolding of frequent and varied feedback in treatment. Last, the identity principle can assist clients in using their newly learned communication skills to redefine self-perceptions. These principles highlight areas for research and interventions that may be used to reinforce or advance current practice.

Are Key Principles for improved health technology assessment supported and used by health technology assessment organizations?

PubMed

Neumann, Peter J; Drummond, Michael F; Jönsson, Bengt; Luce, Bryan R; Schwartz, J Sanford; Siebert, Uwe; Sullivan, Sean D

2010-01-01

Previously, our group-the International Working Group for HTA Advancement-proposed a set of fifteen Key Principles that could be applied to health technology assessment (HTA) programs in different jurisdictions and across a range of organizations and perspectives. In this commentary, we investigate the extent to which these principles are supported and used by fourteen selected HTA organizations worldwide. We find that some principles are broadly supported: examples include being explicit about HTA goals and scope; considering a wide range of evidence and outcomes; and being unbiased and transparent. Other principles receive less widespread support: examples are addressing issues of generalizability and transferability; being transparent on the link between HTA findings and decision-making processes; considering a full societal perspective; and monitoring the implementation of HTA findings. The analysis also suggests a lack of consensus in the field about some principles--for example, considering a societal perspective. Our study highlights differences in the uptake of key principles for HTA and indicates considerable room for improvement for HTA organizations to adopt principles identified to reflect good HTA practices. Most HTA organizations espouse certain general concepts of good practice--for example, assessments should be unbiased and transparent. However, principles that require more intensive follow-up--for example, monitoring the implementation of HTA findings--have received little support and execution.

Design Principles for Augmented Reality Learning

ERIC Educational Resources Information Center

Dunleavy, Matt

2014-01-01

Augmented reality is an emerging technology that utilizes mobile, context-aware devices (e.g., smartphones, tablets) that enable participants to interact with digital information embedded within the physical environment. This overview of design principles focuses on specific strategies that instructional designers can use to develop AR learning…

Urban Environment Development based on Universal Design Principles

NASA Astrophysics Data System (ADS)

Harsritanto, Bangun Ir

2018-02-01

Universal Design is a design which facilitated full range of human diversity. By applying Universal design principles, urban environment can be more functional and more user-friendly for everyone. This study examined five urban streets of South Korea as a country experienced on developing various urban street designs based on universal design. This study aimed to examine and compare the South Korea cases using seven principles of universal design. The research methods of this study are literature study, case study, and site observation. The results of this study are: South Korea cases are good practices, urgency of implementing the direction into local regulations; and change of urban development paradigm.

Expanded Learning Time and Opportunities: Key Principles, Driving Perspectives, and Major Challenges

ERIC Educational Resources Information Center

Blyth, Dale A.; LaCroix-Dalluhn, Laura

2011-01-01

If expanded learning is going to make a real difference, then three key principles must inform how communities overcome challenges and assure equitable access to learning opportunities. Much of today's debate is framed in the language of formal education systems--students, classrooms, schools--even though part of the expansion seeks to engage a…

Designing for Success: Developing Engineers Who Consider Universal Design Principles

ERIC Educational Resources Information Center

Bigelow, Kimberly Edginton

2012-01-01

Engineers must design for a diverse group of potential users of their products; however, engineering curricula rarely include an emphasis on universal design principles. This research article details the effectiveness of a design project implemented in a first-year engineering course in an effort to raise awareness of the need for engineers to be…

Architectural design of heterogeneous metallic nanocrystals--principles and processes.

PubMed

Yu, Yue; Zhang, Qingbo; Yao, Qiaofeng; Xie, Jianping; Lee, Jim Yang

2014-12-16

CONSPECTUS: Heterogeneous metal nanocrystals (HMNCs) are a natural extension of simple metal nanocrystals (NCs), but as a research topic, they have been much less explored until recently. HMNCs are formed by integrating metal NCs of different compositions into a common entity, similar to the way atoms are bonded to form molecules. HMNCs can be built to exhibit an unprecedented architectural diversity and complexity by programming the arrangement of the NC building blocks ("unit NCs"). The architectural engineering of HMNCs involves the design and fabrication of the architecture-determining elements (ADEs), i.e., unit NCs with precise control of shape and size, and their relative positions in the design. Similar to molecular engineering, where structural diversity is used to create more property variations for application explorations, the architectural engineering of HMNCs can similarly increase the utility of metal NCs by offering a suite of properties to support multifunctionality in applications. The architectural engineering of HMNCs calls for processes and operations that can execute the design. Some enabling technologies already exist in the form of classical micro- and macroscale fabrication techniques, such as masking and etching. These processes, when used singly or in combination, are fully capable of fabricating nanoscopic objects. What is needed is a detailed understanding of the engineering control of ADEs and the translation of these principles into actual processes. For simplicity of execution, these processes should be integrated into a common reaction system and yet retain independence of control. The key to architectural diversity is therefore the independent controllability of each ADE in the design blueprint. The right chemical tools must be applied under the right circumstances in order to achieve the desired outcome. In this Account, after a short illustration of the infinite possibility of combining different ADEs to create HMNC design

DeafSpace and the principles of universal design.

PubMed

Edwards, Claire; Harold, Gill

2014-01-01

Recent debates about the epistemological origins of Universal Design (UD) have questioned how far universalist design approaches can address the particularities and diversities of the human form through a series of standardised, technical responses. This article contributes to these debates by discussing an emergent architectural paradigm known as DeafSpace, which articulates a set of design principles originating from the d/Deaf community in the US. Commentary. DeafSpace has emerged as a design paradigm rooted in an expression of d/Deaf cultural identity based around sign language, rather than as a response designed to compensate for, or minimise, impairment. It distinguishes itself from UD by articulating a more user-centred design process, but its principles are arguably rooted in notions of d/Deaf identity based around consensus and homogeneity, with less attention paid to the socio-political contexts which shape diverse experiences of d/Deafness and the exclusion(s) of d/Deaf people from the built environment. While proponents of DeafSpace argue that UD and DeafSpace are not mutually exclusive, nor DeafSpace principles applicable only to d/Deaf people, questions remain about the type of spaces DeafSpace creates, most notably whether they lead to the creation of particularist spaces of and for the d/Deaf community, or reflect a set of design principles which can be embedded across a range of different environments. Implications for Rehabilitation UD as a basis for rehabilitation has been critiqued on the basis that creates "standardised", or universal solutions, thus negating the particularities of the human form. DeafSpace is an architectural paradigm rooted in socio-linguistic understandings of Deafness and the cultural identity of the Deaf community. It challenges UD's technocratic emphasis on minimising impairment and asserts design which is rooted in a more qualitative understanding of individuals' relationship with their environment. DeafSpace seeks to

Limitations on Design Principles for Public Key Protocols

DTIC Science & Technology

1996-01-01

preserves nonrepudiation|assuming, as in the last example, that signatures are added to each message. Note that for all the messages save one, the...digital money must be put up against any bid in their auction, the attack requires the active partic- ipation of a bank. Second, since they protect...ACM Press, New York, November 1993. [5] R. Bird, I. Gopal, A. Herzberg , P. Janson, S. Kut- ten, R. Molva, and M. Yung. Systematic Design of a Family

Instructional Audio Guidelines: Four Design Principles to Consider for Every Instructional Audio Design Effort

ERIC Educational Resources Information Center

Carter, Curtis W.

2012-01-01

This article contends that instructional designers and developers should attend to four particular design principles when creating instructional audio. Support for this view is presented by referencing the limited research that has been done in this area, and by indicating how and why each of the four principles is important to the design process.…

Design principles for nickel hydrogen cells and batteries

NASA Technical Reports Server (NTRS)

Thaller, L. H.

1985-01-01

Nickel hydrogen cells, and more recently, bipolar batteries have been built by a variety of organizations. The design principles that have been used by the technology group at the Lewis Research Center draw upon their extensive background in separator technology, alkaline fuel cell technology, and several alkaline cell technology areas. These design principles have been incorporated into both the more contemporary individual pressure vessel (IPV) designs that were pioneered by other groups, as well as the more recent bipolar battery designs using active cooling that are being developed at LeRC and their contractors. These principles are rather straightforward applications of capillary force formalisms, coupled with the slowly developing data base resulting from careful post test analyses. The objective of this overall effort is directed towards the low Earth orbit (LEO) application where the cycle life requirements are much more severe than the geosynchronous orbit (GEO) application. Nickel hydrogen cells have already been successfully flown in an increasing number of GEO missions.

Design principles in the development of (public) health information infrastructures.

PubMed

Neame, Roderick

2012-01-01

In this article the author outlines the key issues in the development of a regional health information infrastructure suitable for public health data collections. A set of 10 basic design and development principles as used and validated in the development of the successful New Zealand National Health Information Infrastructure in 1993 are put forward as a basis for future developments. The article emphasises the importance of securing clinical input into any health data that is collected, and suggests strategies whereby this may be achieved, including creating an information economy alongside the care economy. It is suggested that the role of government in such developments is to demonstrate leadership, to work with the sector to develop data, messaging and security standards, to establish key online indexes, to develop data warehouses and to create financial incentives for adoption of the infrastructure and the services it delivers to users. However experience suggests that government should refrain from getting involved in local care services data infrastructure, technology and management issues.

41 CFR Appendix A to Subpart A of... - 3-Key Points and Principles

Code of Federal Regulations, 2010 CFR

2010-07-01

... 41 Public Contracts and Property Management 3 2010-07-01 2010-07-01 false 3-Key Points and Principles A Appendix A to Subpart A of Part 102 Public Contracts and Property Management Federal Property Management Regulations System (Continued) FEDERAL MANAGEMENT REGULATION GENERAL 3-FEDERAL ADVISORY COMMITTEE...

Key principles for a national clinical decision support knowledge sharing framework: synthesis of insights from leading subject matter experts

PubMed Central

Hongsermeier, Tonya; Wright, Adam; Lewis, Janet; Bell, Douglas S; Middleton, Blackford

2013-01-01

Objective To identify key principles for establishing a national clinical decision support (CDS) knowledge sharing framework. Materials and methods As part of an initiative by the US Office of the National Coordinator for Health IT (ONC) to establish a framework for national CDS knowledge sharing, key stakeholders were identified. Stakeholders' viewpoints were obtained through surveys and in-depth interviews, and findings and relevant insights were summarized. Based on these insights, key principles were formulated for establishing a national CDS knowledge sharing framework. Results Nineteen key stakeholders were recruited, including six executives from electronic health record system vendors, seven executives from knowledge content producers, three executives from healthcare provider organizations, and three additional experts in clinical informatics. Based on these stakeholders' insights, five key principles were identified for effectively sharing CDS knowledge nationally. These principles are (1) prioritize and support the creation and maintenance of a national CDS knowledge sharing framework; (2) facilitate the development of high-value content and tooling, preferably in an open-source manner; (3) accelerate the development or licensing of required, pragmatic standards; (4) acknowledge and address medicolegal liability concerns; and (5) establish a self-sustaining business model. Discussion Based on the principles identified, a roadmap for national CDS knowledge sharing was developed through the ONC's Advancing CDS initiative. Conclusion The study findings may serve as a useful guide for ongoing activities by the ONC and others to establish a national framework for sharing CDS knowledge and improving clinical care. PMID:22865671

Key principles for a national clinical decision support knowledge sharing framework: synthesis of insights from leading subject matter experts.

PubMed

Kawamoto, Kensaku; Hongsermeier, Tonya; Wright, Adam; Lewis, Janet; Bell, Douglas S; Middleton, Blackford

2013-01-01

To identify key principles for establishing a national clinical decision support (CDS) knowledge sharing framework. As part of an initiative by the US Office of the National Coordinator for Health IT (ONC) to establish a framework for national CDS knowledge sharing, key stakeholders were identified. Stakeholders' viewpoints were obtained through surveys and in-depth interviews, and findings and relevant insights were summarized. Based on these insights, key principles were formulated for establishing a national CDS knowledge sharing framework. Nineteen key stakeholders were recruited, including six executives from electronic health record system vendors, seven executives from knowledge content producers, three executives from healthcare provider organizations, and three additional experts in clinical informatics. Based on these stakeholders' insights, five key principles were identified for effectively sharing CDS knowledge nationally. These principles are (1) prioritize and support the creation and maintenance of a national CDS knowledge sharing framework; (2) facilitate the development of high-value content and tooling, preferably in an open-source manner; (3) accelerate the development or licensing of required, pragmatic standards; (4) acknowledge and address medicolegal liability concerns; and (5) establish a self-sustaining business model. Based on the principles identified, a roadmap for national CDS knowledge sharing was developed through the ONC's Advancing CDS initiative. The study findings may serve as a useful guide for ongoing activities by the ONC and others to establish a national framework for sharing CDS knowledge and improving clinical care.

Design principles and developmental mechanisms underlying retinal mosaics.

PubMed

Reese, Benjamin E; Keeley, Patrick W

2015-08-01

Most structures within the central nervous system (CNS) are composed of different types of neuron that vary in both number and morphology, but relatively little is known about the interplay between these two features, i.e. about the population dynamics of a given cell type. How such arrays of neurons are distributed within a structure, and how they differentiate their dendrites relative to each other, are issues that have recently drawn attention in the invertebrate nervous system, where the genetic and molecular underpinnings of these organizing principles are being revealed in exquisite detail. The retina is one of the few locations where these principles have been extensively studied in the vertebrate CNS, indeed, where the design principles of 'mosaic regularity' and 'uniformity of coverage' were first explicitly defined, quantified, and related to each other. Recent studies have revealed a number of genes that influence the formation of these histotypical features in the retina, including homologues of those invertebrate genes, although close inspection reveals that they do not always mediate comparable developmental processes nor elucidate fundamental design principles. The present review considers just how pervasive these features of 'mosaic regularity' and 'uniform dendritic coverage' are within the mammalian retina, discussing the means by which such features can be assessed in the mature and developing nervous system and examining the limitations associated with those assessments. We then address the extent to which these two design principles co-exist within different populations of neurons, and how they are achieved during development. Finally, we consider the neural phenotypes obtained in mutant nervous systems, to address whether a prospective gene of interest underlies those very design principles. © 2014 The Authors. Biological Reviews © 2014 Cambridge Philosophical Society.

Design principles for hydrogen evolution reaction catalyst materials

DOE PAGES

Strmcnik, Dusan; Lopes, Pietro Papa; Genorio, Bostjan; ...

2016-04-19

Design and synthesis of active, stable and cost-effective materials for efficient hydrogen production (hydrogen evolution reaction, HER) is of paramount importance for the successful deployment of hydrogen -based alternative energy technologies. The HER, seemingly one of the simplest electrochemical reactions, has served for decades to bridge the gap between fundamental electrocatalysis and practical catalyst design. However, there are still many open questions that need to be answered before it would be possible to claim that design principles of catalyst materials are fully developed for the efficient hydrogen production. Here in this review, by summarizing key results for the HER onmore » well-characterized electrochemical interfaces in acidic and alkaline media, we have broadened our understanding of the HER in the whole range of pH by considering three main parameters: the nature of the proton donor (H 3O + in acid and H 2O in alkaline), the energy of adsorption of H ad and OH ad, and the presence of spectator species. Simply by considering these three parameters we show that great deal has already been learned and new trends are beginning to emerge, giving some predictive ability with respect to the nature of electrochemical interface and electrocatalytic activity of the HER.« less

Mental Capacity Act 2005: statutory principles and key concepts.

PubMed

Griffith, Richard; Tengnah, Cassam

2008-05-01

The Mental Capacity Act 2005 represents the most significant development in the law relating to people who lack decision making capacity since the Mental Health Act 1959 removed the states parens patriae jurisdiction preventing relatives, courts and government bodies consenting on behalf of incapable adults (F vs West Berkshire HA [1990]). The Mental Capacity Act 2005 impacts on the care and treatment provided by district nurses and it is essential that you have a sound working knowledge of its provisions and code of practice. In the first article of a series focusing on how the Mental Capacity Act 2005 applies to district nurse practice, Richard Griffith and Cassam Tengnah consider the principles and key concepts underpinning the Act.

Design principles for elementary gene circuits: Elements, methods, and examples

NASA Astrophysics Data System (ADS)

Savageau, Michael A.

2001-03-01

The control of gene expression involves complex circuits that exhibit enormous variation in design. For years the most convenient explanation for these variations was historical accident. According to this view, evolution is a haphazard process in which many different designs are generated by chance; there are many ways to accomplish the same thing, and so no further meaning can be attached to such different but equivalent designs. In recent years a more satisfying explanation based on design principles has been found for at least certain aspects of gene circuitry. By design principle we mean a rule that characterizes some biological feature exhibited by a class of systems such that discovery of the rule allows one not only to understand known instances but also to predict new instances within the class. The central importance of gene regulation in modern molecular biology provides strong motivation to search for more of these underlying design principles. The search is in its infancy and there are undoubtedly many design principles that remain to be discovered. The focus of this three-part review will be the class of elementary gene circuits in bacteria. The first part reviews several elements of design that enter into the characterization of elementary gene circuits in prokaryotic organisms. Each of these elements exhibits a variety of realizations whose meaning is generally unclear. The second part reviews mathematical methods used to represent, analyze, and compare alternative designs. Emphasis is placed on particular methods that have been used successfully to identify design principles for elementary gene circuits. The third part reviews four design principles that make specific predictions regarding (1) two alternative modes of gene control, (2) three patterns of coupling gene expression in elementary circuits, (3) two types of switches in inducible gene circuits, and (4) the realizability of alternative gene circuits and their response to phased

Key principles in running a successful business in facial plastics.

PubMed

Sufyan, Ahmed S; Williams, Edwin F

2014-04-01

The ultimate goal for most facial plastic surgeons is to develop a successful practice. For those currently owning a practice and those planning on developing a practice, the skills and training necessary to establish and manage a facial plastic practice are not taught in medical school, residency, or most fellowships. The goal of this article is to underline the key principles of running a successful business. This article does not replace an MBA, but it allows you to be aware of potential challenges that all businesses encounter. Thieme Medical Publishers 333 Seventh Avenue, New York, NY 10001, USA.

Principles for computational design of binding antibodies

PubMed Central

Pszolla, M. Gabriele; Lapidoth, Gideon D.; Norn, Christoffer; Dym, Orly; Unger, Tamar; Albeck, Shira; Tyka, Michael D.; Fleishman, Sarel J.

2017-01-01

Natural proteins must both fold into a stable conformation and exert their molecular function. To date, computational design has successfully produced stable and atomically accurate proteins by using so-called “ideal” folds rich in regular secondary structures and almost devoid of loops and destabilizing elements, such as cavities. Molecular function, such as binding and catalysis, however, often demands nonideal features, including large and irregular loops and buried polar interaction networks, which have remained challenging for fold design. Through five design/experiment cycles, we learned principles for designing stable and functional antibody variable fragments (Fvs). Specifically, we (i) used sequence-design constraints derived from antibody multiple-sequence alignments, and (ii) during backbone design, maintained stabilizing interactions observed in natural antibodies between the framework and loops of complementarity-determining regions (CDRs) 1 and 2. Designed Fvs bound their ligands with midnanomolar affinities and were as stable as natural antibodies, despite having >30 mutations from mammalian antibody germlines. Furthermore, crystallographic analysis demonstrated atomic accuracy throughout the framework and in four of six CDRs in one design and atomic accuracy in the entire Fv in another. The principles we learned are general, and can be implemented to design other nonideal folds, generating stable, specific, and precise antibodies and enzymes. PMID:28973872

The Spatial Vision Tree: A Generic Pattern Recognition Engine- Scientific Foundations, Design Principles, and Preliminary Tree Design

NASA Technical Reports Server (NTRS)

Rahman, Zia-ur; Jobson, Daniel J.; Woodell, Glenn A.

2010-01-01

New foundational ideas are used to define a novel approach to generic visual pattern recognition. These ideas proceed from the starting point of the intrinsic equivalence of noise reduction and pattern recognition when noise reduction is taken to its theoretical limit of explicit matched filtering. This led us to think of the logical extension of sparse coding using basis function transforms for both de-noising and pattern recognition to the full pattern specificity of a lexicon of matched filter pattern templates. A key hypothesis is that such a lexicon can be constructed and is, in fact, a generic visual alphabet of spatial vision. Hence it provides a tractable solution for the design of a generic pattern recognition engine. Here we present the key scientific ideas, the basic design principles which emerge from these ideas, and a preliminary design of the Spatial Vision Tree (SVT). The latter is based upon a cryptographic approach whereby we measure a large aggregate estimate of the frequency of occurrence (FOO) for each pattern. These distributions are employed together with Hamming distance criteria to design a two-tier tree. Then using information theory, these same FOO distributions are used to define a precise method for pattern representation. Finally the experimental performance of the preliminary SVT on computer generated test images and complex natural images is assessed.

School Building Designs: Principles and Challenges of the 21st Century.

ERIC Educational Resources Information Center

Chan, T. C.

2002-01-01

Reviews school-facility challenges and design principles described in 2000 U.S. Department of Education report on school planning and design. Describes additional school-facility design challenges and planning principles. Describes five critical facility-planning issues for the 21st Century. (Contains 14 references.) (PKP)

Evolutionary principles and their practical application

PubMed Central

Hendry, Andrew P; Kinnison, Michael T; Heino, Mikko; Day, Troy; Smith, Thomas B; Fitt, Gary; Bergstrom, Carl T; Oakeshott, John; Jørgensen, Peter S; Zalucki, Myron P; Gilchrist, George; Southerton, Simon; Sih, Andrew; Strauss, Sharon; Denison, Robert F; Carroll, Scott P

2011-01-01

Evolutionary principles are now routinely incorporated into medicine and agriculture. Examples include the design of treatments that slow the evolution of resistance by weeds, pests, and pathogens, and the design of breeding programs that maximize crop yield or quality. Evolutionary principles are also increasingly incorporated into conservation biology, natural resource management, and environmental science. Examples include the protection of small and isolated populations from inbreeding depression, the identification of key traits involved in adaptation to climate change, the design of harvesting regimes that minimize unwanted life-history evolution, and the setting of conservation priorities based on populations, species, or communities that harbor the greatest evolutionary diversity and potential. The adoption of evolutionary principles has proceeded somewhat independently in these different fields, even though the underlying fundamental concepts are the same. We explore these fundamental concepts under four main themes: variation, selection, connectivity, and eco-evolutionary dynamics. Within each theme, we present several key evolutionary principles and illustrate their use in addressing applied problems. We hope that the resulting primer of evolutionary concepts and their practical utility helps to advance a unified multidisciplinary field of applied evolutionary biology. PMID:25567966

Evolutionary principles and their practical application.

PubMed

Hendry, Andrew P; Kinnison, Michael T; Heino, Mikko; Day, Troy; Smith, Thomas B; Fitt, Gary; Bergstrom, Carl T; Oakeshott, John; Jørgensen, Peter S; Zalucki, Myron P; Gilchrist, George; Southerton, Simon; Sih, Andrew; Strauss, Sharon; Denison, Robert F; Carroll, Scott P

2011-03-01

Evolutionary principles are now routinely incorporated into medicine and agriculture. Examples include the design of treatments that slow the evolution of resistance by weeds, pests, and pathogens, and the design of breeding programs that maximize crop yield or quality. Evolutionary principles are also increasingly incorporated into conservation biology, natural resource management, and environmental science. Examples include the protection of small and isolated populations from inbreeding depression, the identification of key traits involved in adaptation to climate change, the design of harvesting regimes that minimize unwanted life-history evolution, and the setting of conservation priorities based on populations, species, or communities that harbor the greatest evolutionary diversity and potential. The adoption of evolutionary principles has proceeded somewhat independently in these different fields, even though the underlying fundamental concepts are the same. We explore these fundamental concepts under four main themes: variation, selection, connectivity, and eco-evolutionary dynamics. Within each theme, we present several key evolutionary principles and illustrate their use in addressing applied problems. We hope that the resulting primer of evolutionary concepts and their practical utility helps to advance a unified multidisciplinary field of applied evolutionary biology.

Design principles and issues of rights expression languages for digital rights management

NASA Astrophysics Data System (ADS)

Wang, Xin

2005-07-01

Digital rights management (DRM) provides a unified approach to specifying, interpreting, enforcing and managing digital rights throughout the entire life cycle of digital assets. Using a declarative rights expression language (REL) for specifying rights and conditions in the form of licenses, as opposite to some other approaches (such as data structures and imperative languages), has been considered and adopted as a superior technology for implementing effective, interoperable and scalable DRM systems. This paper discusses some principles and issues for designing RELs, based on the experiences of developing a family of REL"s (DPRL, XrML 1.x, XrML 2.0 and MPEG REL). It starts with an overview of a family tree of the past and current REL"s, and their development history, followed by an analysis of their data models and a comparison with access-control oriented models. It then presents a number of primary design principles such as syntactic and semantic un-ambiguity, system interoperability, expressiveness in supporting business models and future extensibility, and discusses a number of key design issues such as maintaining stateful information, multi-tier issuance of rights, meta rights, identification of individual and aggregate objects, late-binding of to-beidentified entities, as well as some advanced ones on revocation and delegation of rights. The paper concludes with some remarks on REL profiling and extension for specific application domains.

Design principles for data- and change-oriented organisational analysis in workplace health promotion.

PubMed

Inauen, A; Jenny, G J; Bauer, G F

2012-06-01

This article focuses on organizational analysis in workplace health promotion (WHP) projects. It shows how this analysis can be designed such that it provides rational data relevant to the further context-specific and goal-oriented planning of WHP and equally supports individual and organizational change processes implied by WHP. Design principles for organizational analysis were developed on the basis of a narrative review of the guiding principles of WHP interventions and organizational change as well as the scientific principles of data collection. Further, the practical experience of WHP consultants who routinely conduct organizational analysis was considered. This resulted in a framework with data-oriented and change-oriented design principles, addressing the following elements of organizational analysis in WHP: planning the overall procedure, data content, data-collection methods and information processing. Overall, the data-oriented design principles aim to produce valid, reliable and representative data, whereas the change-oriented design principles aim to promote motivation, coherence and a capacity for self-analysis. We expect that the simultaneous consideration of data- and change-oriented design principles for organizational analysis will strongly support the WHP process. We finally illustrate the applicability of the design principles to health promotion within a WHP case study.

Epidemiology and Clinical Research Design, Part 2: Principles.

PubMed

Manja, Veena; Lakshminrusimha, Satyan

This is the third article covering core knowledge in scholarly activities for neonatal physicians. In this article, we discuss various principles of epidemiology and clinical research design. A basic knowledge of these principles is necessary for conducting clinical research and for proper interpretation of studies. This article reviews bias and confounding, causation, incidence and prevalence, decision analysis, cost-effectiveness, sensitivity analysis, and measurement.

Improving quality of care in substance abuse treatment using five key process improvement principles

PubMed Central

Hoffman, Kim A.; Green, Carla A.; Ford, James H.; Wisdom, Jennifer P.; Gustafson, David H.; McCarty, Dennis

2012-01-01

Process and quality improvement techniques have been successfully applied in health care arenas, but efforts to institute these strategies in alcohol and drug treatment are underdeveloped. The Network for the Improvement of Addiction Treatment (NIATx) teaches participating substance abuse treatment agencies to use process improvement strategies to increase client access to, and retention in, treatment. NIATx recommends five principles to promote organizational change: 1) Understand and involve the customer; 2) Fix key problems; 3) Pick a powerful change leader; 4) Get ideas from outside the organization; and 5) Use rapid-cycle testing. Using case studies, supplemented with cross-agency analyses of interview data, this paper profiles participating NIATx treatment agencies that illustrate application of each principle. Results suggest that the most successful organizations integrate and apply most, if not all, of the five principles as they develop and test change strategies. PMID:22282129

Managing clinical education through understanding key principles.

PubMed

Cunningham, Joanne; Wright, Caroline; Baird, Marilyn

2015-01-01

Traditionally, a practicum facilitated the integration of on-campus learning and practical workplace training. Over the past 3 decades, an educative practicum has evolved that promotes clinical reasoning, including analytical and evaluative abilities, through reflective practice. Anecdotal evidence indicates that the delivery of clinical education within medical radiation science entry-level programs continues to vacillate between traditional practicums and the new reflective practicums. To review the literature about clinical education within the medical radiation sciences and identify key principles for practitioners seeking to reflect upon and improve their approach to teaching and supporting students in the clinical environment. A search of 3 major journal databases, Internet searches, and hand searches of reference lists were conducted to identify literature about clinical education in the medical radiation sciences from January 1, 2000, to December 31, 2012. Twenty-two studies were included in this review. The 5 key elements associated with clinical education include the clinical support model and quality, overcoming the theory-practice gap, learning outcomes and reliable and valid assessment, preparing and supporting students, and accommodating differing teaching and learning needs. Many factors influence the quality of clinical education, including the culture of the clinical environment and clinical leadership roles. Several approaches can help students bridge the theory-practice gap, including simulators, role-playing activities, and reflective journals. In addition, clinical educators should use assessment strategies that objectively measure student progress, and they should be positive role models for their students. The successful clinical education of students in the medical radiation sciences depends upon the systems, structures, and people in the clinical environment. Clinical education is accomplished through the collaborative efforts of the

Ten Principles of Effective School Design

ERIC Educational Resources Information Center

New Visions for Public Schools, 2006

2006-01-01

This brief document offers ten principles of effective school design. They are: (1) Clear Focus and High Expectations for staff and students are defining features of an effective school; (2) A Rigorous Instructional Program provides equitable opportunities to learn and enables every student to master challenging content, skills, and learning…

Effective Principles in Designing E-Course in Light of Learning Theories

ERIC Educational Resources Information Center

Afifi, Muhammad K.; Alamri, Saad S.

2014-01-01

The researchers conducted an exploratory study to determine the design quality of some E-courses delivered via the web to a number of colleagues at the university. Results revealed a number of shortcomings in the design of these courses, mostly due to the absence of effective principles in the design of these E-courses, especially principles of…

Investigations into the design principles in the chemotactic behavior of Escherichia coli.

PubMed

Kim, Tae-Hwan; Jung, Sung Hoon; Cho, Kwang-Hyun

2008-01-01

Inspired by the recent studies on the analysis of biased random walk behavior of Escherichia coli[Passino, K.M., 2002. Biomimicry of bacterial foraging for distributed optimization and control. IEEE Control Syst. Mag. 22 (3), 52-67; Passino, K.M., 2005. Biomimicry for Optimization, Control and Automation. Springer-Verlag, pp. 768-798; Liu, Y., Passino, K.M., 2002. Biomimicry of social foraging bacteria for distributed optimization: models, principles, and emergent behaviors. J. Optim. Theory Appl. 115 (3), 603-628], we have developed a model describing the motile behavior of E. coli by specifying some simple rules on the chemotaxis. Based on this model, we have analyzed the role of some key parameters involved in the chemotactic behavior to unravel the underlying design principles. By investigating the target tracking capability of E. coli in a maze through computer simulations, we found that E. coli clusters can be controlled as target trackers in a complex micro-scale-environment. In addition, we have explored the dynamical characteristics of this target tracking mechanism through perturbation of parameters under noisy environments. It turns out that the E. coli chemotaxis mechanism might be designed such that it is sensitive enough to efficiently track the target and also robust enough to overcome environmental noises.

Principles and Heuristics for Designing Minimalist Instruction.

ERIC Educational Resources Information Center

van der Meij, Hans; Carroll, John M.

1995-01-01

Presents an overview of principles and heuristics for designing minimalist instruction, with examples and theoretical or empirical arguments. Provides a starting point from which to create minimalist instruction to suit a variety of uses. (SR)

Epidemiology and Clinical Research Design, Part 2: Principles

PubMed Central

Manja, Veena; Lakshminrusimha, Satyan

2015-01-01

This is the third article covering core knowledge in scholarly activities for neonatal physicians. In this article, we discuss various principles of epidemiology and clinical research design. A basic knowledge of these principles is necessary for conducting clinical research and for proper interpretation of studies. This article reviews bias and confounding, causation, incidence and prevalence, decision analysis, cost-effectiveness, sensitivity analysis, and measurement. PMID:26236171

75 FR 80571 - Core Principles and Other Requirements for Designated Contract Markets

Federal Register 2010, 2011, 2012, 2013, 2014

2010-12-22

... Part II Commodity Futures Trading Commission 17 CFR Parts 1, 16, and 38 Core Principles and Other... CFR Parts 1, 16, and 38 RIN 3038-AD09 Core Principles and Other Requirements for Designated Contract... Principles 1. Subpart B--Designation as Contract Market 2. Subpart C--Compliance With Rules i. Proposed Sec...

The Value of the Operational Principle in Instructional Design

ERIC Educational Resources Information Center

Gibbons, Andrew S.

2009-01-01

Formal design studies are increasing our insight into design processes, including those of instructional design. Lessons are being learned from other design fields, and new techniques and concepts can be imported as they are demonstrated effective. The purpose of this article is to introduce a design concept--the "operational principle"--for…

Emergent features and perceptual objects: re-examining fundamental principles in analogical display design.

PubMed

Holt, Jerred; Bennett, Kevin B; Flach, John M

2015-01-01

Two sets of design principles for analogical visual displays, based on the concepts of emergent features and perceptual objects, are described. An interpretation of previous empirical findings for three displays (bar graph, polar graphic, alphanumeric) is provided from both perspectives. A fourth display (configural coordinate) was designed using principles of ecological interface design (i.e. direct perception). An experiment was conducted to evaluate performance (accuracy and latency of state identification) with these four displays. Numerous significant effects were obtained and a clear rank ordering of performance emerged (from best to worst): configural coordinate, bar graph, alphanumeric and polar graphic. These findings are consistent with principles of design based on emergent features; they are inconsistent with principles based on perceptual objects. Some limitations of the configural coordinate display are discussed and a redesign is provided. Practitioner Summary: Principles of ecological interface design, which emphasise the quality of very specific mappings between domain, display and observer constraints, are described; these principles are applicable to the design of all analogical graphical displays.

Designing User-Computer Dialogues: Basic Principles and Guidelines.

ERIC Educational Resources Information Center

Harrell, Thomas H.

This discussion of the design of computerized psychological assessment or testing instruments stresses the importance of the well-designed computer-user interface. The principles underlying the three main functional elements of computer-user dialogue--data entry, data display, and sequential control--are discussed, and basic guidelines derived…

Evaluating Course Design Principles for Multimedia Learning Materials

ERIC Educational Resources Information Center

Scott, Bernard; Cong, Chunyu

2010-01-01

Purpose: This paper aims to report on evaluation studies of principles of course design for interactive multimedia learning materials. Design/methodology/approach: At the Defence Academy of the UK, Cranfield University has worked with military colleagues to produce multimedia learning materials for courses on "Military Knowledge". The…

Developing design principles for a Virtual Hospice: improving access to care.

PubMed

Taylor, Andrea; French, Tara; Raman, Sneha

2018-03-01

Providing access to hospice services will become increasingly difficult due to the pressures of an ageing population and limited resources. To help address this challenge, a small number of services called Virtual Hospice have been established. This paper presents early-stage design work on a Virtual Hospice to improve access to services provided by a hospice (Highland Hospice) serving a largely remote and rural population in Scotland, UK. The study was structured as a series of Experience Labs with Highland Hospice staff, healthcare professionals and patients. Experience Labs employ a participatory design approach where participants are placed at the centre of the design process, helping to ensure that the resultant service meets their needs. Data from the Experience Labs were analysed using qualitative thematic analysis and design analysis. A number of themes and barriers to accessing Highland Hospice services were identified. In response, an initial set of seven design principles was developed. Design principles are high-level guidelines that are used to improve prioritisation and decision making during the design process by ensuring alignment with research insights. The design principles were piloted with a group of stakeholders and gained positive feedback. The design principles are intended to guide the ongoing development of the Highland Hospice Virtual Hospice. However, the challenges faced by Highland Hospice in delivering services in a largely remote and rural setting are not unique. The design principles, encompassing digital and non-digital guidelines, or the design approach could be applied by other hospices in the UK or overseas. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2018. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

Universal Design for Online Courses: Applying Principles to Pedagogy

ERIC Educational Resources Information Center

Rao, Kavita; Edelen-Smith, Patricia; Wailehua, Cat-Uyen

2015-01-01

Universal design (UD) educational frameworks provide useful guidelines for designing accessible learning environments with the intention of supporting students with and without disabilities. This article describes how one university instructor defined and applied the principles of Universal Instructional Design (UID) to pedagogy, while designing…

Designing the Electronic Classroom: Applying Learning Theory and Ergonomic Design Principles.

ERIC Educational Resources Information Center

Emmons, Mark; Wilkinson, Frances C.

2001-01-01

Applies learning theory and ergonomic principles to the design of effective learning environments for library instruction. Discusses features of electronic classroom ergonomics, including the ergonomics of physical space, environmental factors, and workstations; and includes classroom layouts. (Author/LRW)

Design principles and common pool resource management: an institutional approach to evaluating community management in semi-arid Tanzania.

PubMed

Quinn, Claire H; Huby, Meg; Kiwasila, Hilda; Lovett, Jon C

2007-07-01

This paper analyses the role of institutions in the management of common pool resources (CPRs) in semi-arid Tanzania. Common property regimes have often been considered inadequate for the management of CPRs because of the problems of excludability, but they are becoming more widely supported as the way forward to overcome the problems of resource use and degradation in developing countries. A series of design principles for long enduring common property institutions have been proposed by Ostrom, but there is concern that they are not applicable to a wide range of real life situations or that they may be specific to certain types of CPR. Here, we compare these principles to the situation prevailing in 12 villages in six districts in semi-arid Tanzania. Data on management institutions were collected through semi-structured interviews and meetings at district and village level. The combined information was used to make a qualitative assessment of the strength with which each design principle appeared to operate in the management of forest, pasture and water resources. Boundaries, conflict and negotiation in CPR management are of key importance in semi-arid regions. However, the need for flexibility in order to deal with ecological uncertainty means that many management institutions would be considered weak or absent according to the design principle approach. This supports the view that the design principles should not be used as a 'blueprint to be imposed on resource management regimes' rather that they provide a framework for investigating common property regimes with the proviso that, certainly for semi-arid regions, they may highlight where management cannot be explained by institutional theory alone.

78 FR 32988 - Core Principles and Other Requirements for Designated Contract Markets; Correction

Federal Register 2010, 2011, 2012, 2013, 2014

2013-06-03

... COMMODITY FUTURES TRADING COMMISSION 17 CFR Part 38 RIN 3038-AD09 Core Principles and Other... regarding Core Principles and Other Requirements for Designated Contract Markets by inserting a missing... regarding Core Principles and Other Requirements for Designated Contract Markets (77 FR 36612, June 19, 2012...

A Review: Principles of Design and Analysis of Learning Systems

ERIC Educational Resources Information Center

Durney, Carl H.

1973-01-01

Analyzes a traditional and an innovative course in terms of learning principles, involving Erickson's management methods and Gagne's learning activities. Suggests that learning systems should be designed by applying all principles rather than emphasizing one or two of them. (CC)

10 CFR 433.6 - Sustainable principles for siting, design and construction. [Reserved

Code of Federal Regulations, 2013 CFR

2013-01-01

... 10 Energy 3 2013-01-01 2013-01-01 false Sustainable principles for siting, design and construction... FOR NEW FEDERAL COMMERCIAL AND MULTI-FAMILY HIGH-RISE RESIDENTIAL BUILDINGS § 433.6 Sustainable principles for siting, design and construction. [Reserved] ...

10 CFR 433.6 - Sustainable principles for siting, design and construction. [Reserved

Code of Federal Regulations, 2012 CFR

2012-01-01

... 10 Energy 3 2012-01-01 2012-01-01 false Sustainable principles for siting, design and construction... FOR NEW FEDERAL COMMERCIAL AND MULTI-FAMILY HIGH-RISE RESIDENTIAL BUILDINGS § 433.6 Sustainable principles for siting, design and construction. [Reserved] ...

10 CFR 433.6 - Sustainable principles for siting, design and construction. [Reserved

Code of Federal Regulations, 2014 CFR

2014-01-01

... 10 Energy 3 2014-01-01 2014-01-01 false Sustainable principles for siting, design and construction... FOR NEW FEDERAL COMMERCIAL AND MULTI-FAMILY HIGH-RISE RESIDENTIAL BUILDINGS § 433.6 Sustainable principles for siting, design and construction. [Reserved] ...

Designing for Communication: The Key to Successful Desktop Publishing.

ERIC Educational Resources Information Center

McCain, Ted D. E.

Written for those who are new to design and page layout, this book focuses on providing novice desktop publishers with an understanding of communication, graphic design, typography, page layout, and page layout techniques. The book also discusses how people read, design as a consequence of understanding, and the principles of page layout. Chapters…

Integrating principles and multidisciplinary projects in design education

NASA Technical Reports Server (NTRS)

Nevill, Gale E., Jr.

1992-01-01

The critical need to improve engineering design education in the U.S. is presented and a number of actions to achieve that end are discussed. The importance of teaching undergraduates the latest methods and principles through the means of team design in multidisciplinary projects leading to a testable product is emphasized. Desirable training for design instructors is described and techniques for selecting and managing projects that teach effectively are discussed.

Two Eyes, 3D: Stereoscopic Design Principles

NASA Astrophysics Data System (ADS)

Price, Aaron; Subbarao, M.; Wyatt, R.

2013-01-01

Two Eyes, 3D is a NSF-funded research project about how people perceive highly spatial objects when shown with 2D or stereoscopic ("3D") representations. As part of the project, we produced a short film about SN 2011fe. The high definition film has been rendered in both 2D and stereoscopic formats. It was developed according to a set of stereoscopic design principles we derived from the literature and past experience producing and studying stereoscopic films. Study participants take a pre- and post-test that involves a spatial cognition assessment and scientific knowledge questions about Type-1a supernovae. For the evaluation, participants use iPads in order to record spatial manipulation of the device and look for elements of embodied cognition. We will present early results and also describe the stereoscopic design principles and the rationale behind them. All of our content and software is available under open source licenses. More information is at www.twoeyes3d.org.

Design principles for wave plate metasurfaces using plasmonic L-shaped nanoantennas

NASA Astrophysics Data System (ADS)

Tahir, Asad A.; Schulz, Sebastian A.; De Leon, Israel; Boyd, Robert W.

2017-03-01

Plasmonic L-shaped antennas are an important building block of metasurfaces and have been used to fabricate ultra-thin wave plates. In this work we present principles that can be used to design wave plates at a wavelength of choice and for diverse application requirements using arrays of L-shaped plasmonic antennas. We derive these design principles by studying the behavior of the vast parameter space of these antenna arrays. We show that there are two distinct regimes: a weak inter-particle coupling and a strong inter-particle coupling regime. We describe the behavior of the antenna array in each regime with regards to wave plate functionality, without resorting to approximate theoretical models. Our work is the first to explain these design principles and serves as a guide for designing wave plates for specific application requirements using plasmonic L-shaped antenna arrays.

Design of a Blended Learning Environment Based on Merrill’s Principles

NASA Astrophysics Data System (ADS)

Simarmata, Janner; Djohar, Asari; Purba, Janulis; Juanda, Enjang A.

2018-01-01

Designing blended learning courses requires a systematic approach, in instructional design decisions and implementations, instructional principles help educators not only to specify the elements of the course, but also to provide a solid base from which to build the technology. The blended learning course was designed based on Merrill’s First Principles of Instruction with five phases. This paper helps inform educators about how to develop appropriate learning styles and preferences according to students’ learning needs.

On the search for design principles in biological systems.

PubMed

Poyatos, Juan F

2012-01-01

The search for basic concepts and underlying principles was at the core of the systems approach to science and technology. This approach was somehow abandoned in mainstream biology after its initial proposal, due to the rise and success of molecular biology. This situation has changed. The accumulated knowledge of decades of molecular studies in combination with new technological advances, while further highlighting the intricacies of natural systems, is also bringing back the quest-for-principles research program. Here, I present two lessons that I derived from my own quest: the importance of studying biological information processing to identify common principles in seemingly unrelated contexts and the adequacy of using known design principles at one level of biological organization as a valuable tool to help recognizing principles at an alternative one. These and additional lessons should contribute to the ultimate goal of establishing principles able to integrate the many scales of biological complexity.

Toward Instructional Design Principles: Inducing Faraday's Law with Contrasting Cases

ERIC Educational Resources Information Center

Kuo, Eric; Wieman, Carl E.

2016-01-01

Although physics education research (PER) has improved instructional practices, there are not agreed upon principles for designing effective instructional materials. Here, we illustrate how close comparison of instructional materials could support the development of such principles. Specifically, in discussion sections of a large, introductory…

A Protocol for Evaluating Contextual Design Principles

PubMed Central

Stamps, Arthur

2014-01-01

This paper explains how scientific data can be incorporated into urban design decisions, such as evaluating contextual design principles. The recommended protocols are based on the Cochrane Reviews that have been widely used in medical research. The major concepts of a Cochrane Review are explained, as well as the underlying mathematics. The underlying math is meta-analysis. Data are reported for three applications and seven contextual design policies. It is suggested that use of the Cochrane protocols will be of great assistance to planners by providing scientific data that can be used to evaluate the efficacies of contextual design policies prior to implementing those policies. PMID:25431448

Principles of Space Plasma Wave Instrument Design

NASA Technical Reports Server (NTRS)

Gurnett, Donald A.

1998-01-01

Space plasma waves span the frequency range from somewhat below the ion cyclotron frequency to well above the electron cyclotron frequency and plasma frequency. Because of the large frequency range involved, the design of space plasma wave instrumentation presents many interesting challenges. This chapter discusses the principles of space plasma wave instrument design. The topics covered include: performance requirements, electric antennas, magnetic antennas, and signal processing. Where appropriate, comments are made on the likely direction of future developments.

10 CFR 435.6 - Sustainable principles for siting, design and construction. [Reserved

Code of Federal Regulations, 2014 CFR

2014-01-01

... 10 Energy 3 2014-01-01 2014-01-01 false Sustainable principles for siting, design and construction. [Reserved] 435.6 Section 435.6 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION ENERGY EFFICIENCY STANDARDS...-Rise Residential Buildings. § 435.6 Sustainable principles for siting, design and construction...

10 CFR 435.6 - Sustainable principles for siting, design and construction. [Reserved

Code of Federal Regulations, 2013 CFR

2013-01-01

... 10 Energy 3 2013-01-01 2013-01-01 false Sustainable principles for siting, design and construction. [Reserved] 435.6 Section 435.6 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION ENERGY EFFICIENCY STANDARDS...-Rise Residential Buildings. § 435.6 Sustainable principles for siting, design and construction...

10 CFR 435.6 - Sustainable principles for siting, design and construction. [Reserved

Code of Federal Regulations, 2012 CFR

2012-01-01

... 10 Energy 3 2012-01-01 2012-01-01 false Sustainable principles for siting, design and construction. [Reserved] 435.6 Section 435.6 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION ENERGY EFFICIENCY STANDARDS...-Rise Residential Buildings. § 435.6 Sustainable principles for siting, design and construction...

The design principles of edutainment system for autistic children with communication difficulties

NASA Astrophysics Data System (ADS)

Hussain, Azham; Abdullah, Adil; Husni, Husniza

2016-08-01

Approximately 50% of all individuals with Autism have difficulties in developing functional language owing to communication deterioration. Mobile devices with installed educational games help these individuals feel more comfortable and relaxed doing such activities. Although numerous mobile applications are available for individuals with Autism, they are difficult to use; particularly in terms of user-interface design. From the analysis of existing apps for autistic children, an app design principles are proposed based on interaction design (IxD), that would fulfil the users' requirements in a better manner. Five applications were involved in this analysis. The analysis identified fifteen suggestions for the design principles. These recommendations are offered by this paper towards designing and developing a prototype app for autistic children. This paper introduces an edutainment-system design principle formulated to help develop the communication skills of children with Autism-spectrum disorders.

Seaworthy Quantum Key Distribution Design and Validation (SEAKEY)

DTIC Science & Technology

2016-03-10

Contractor Address: 10 Moulton Street, Cambridge, MA 02138 Title of the Project: Seaworthy Quantum Key Distribution Design and Validation (SEAKEY...Technologies Kathryn Carson Program Manager Quantum Information Processing 2 | P a g e Approved for public release; distribution is...we have continued work calculating the key rates achievable parametrically with receiver performance. In addition, we describe the initial designs

Insurance principles and the design of prospective payment systems.

PubMed

Ellis, R P; McGuire, T G

1988-09-01

This paper applies insurance principles to the issues of optimal outlier payments and designation of peer groups in Medicare's case-based prospective payment system for hospital care. Arrow's principle that full insurance after a deductible is optimal implies that, to minimize hospital risk, outlier payments should be based on hospital average loss per case rather than, as at present, based on individual case-level losses. The principle of experience rating implies defining more homogenous peer groups for the purpose of figuring average cost. The empirical significance of these results is examined using a sample of 470,568 discharges from 469 hospitals.

Design Principles for E-Government Architectures

NASA Astrophysics Data System (ADS)

Sandoz, Alain

The paper introduces a holistic approach for architecting systems which must sustain the entire e-government activity of a public authority. Four principles directly impact the architecture: Legality, Responsibility, Transparency, and Symmetry leading to coherent representations of the architecture for the client, the designer and the builder. The approach enables to deploy multipartite, distributed public services, including legal delegation of roles and outsourcing of non mandatory tasks through PPP.

Conceptual Learning in a Principled Design Problem Solving Environment

ERIC Educational Resources Information Center

Prusak, Naomi; Hershkowitz, Rina; Schwarz, Baruch B.

2013-01-01

To what extent can instructional design be based on principles for instilling a culture of problem solving and conceptual learning? This is the main focus of the study described in this paper, in which third grade students participated in a one-year course designed to foster problem solving and mathematical reasoning. The design relied on five…

Spaceborne receivers: Basic principles

NASA Technical Reports Server (NTRS)

Stacey, J. M.

1984-01-01

The underlying principles of operation of microwave receivers for space observations of planetary surfaces were examined. The design philosophy of the receiver as it is applied to operate functionally as an efficient receiving system, the principle of operation of the key components of the receiver, and the important differences among receiver types are explained. The operating performance and the sensitivity expectations for both the modulated and total power receiver configurations are outlined. The expressions are derived from first principles and are developed through the important intermediate stages to form practicle and easily applied equations. The transfer of thermodynamic energy from point to point within the receiver is illustrated. The language of microwave receivers is applied statistics.

Seaworthy Quantum Key Distribution Design and Validation (SEAKEY)

DTIC Science & Technology

2015-05-27

Address: 10 Moulton Street, Cambridge, MA 02138 Title of the Project: Seaworthy Quantum Key Distribution Design and Validation (SEAKEY...Technologies Kathryn Carson Program Manager Quantum Information Processing Report Documentation Page Form ApprovedOMB No. 0704-0188 Public...2016 4. TITLE AND SUBTITLE Seaworthy Quantum Key Distribution Design and Validation (SEAKEY) 5a. CONTRACT NUMBER 5b. GRANT NUMBER 5c. PROGRAM

The Elements and Principles of Design: A Baseline Study

ERIC Educational Resources Information Center

Adams, Erin

2013-01-01

Critical to the discipline, both professionally and academically, are the fundamentals of interior design. These fundamentals include the elements and principles of interior design: the commonly accepted tools and vocabulary used to create and communicate successful interior environments. Research indicates a lack of consistency in both the…

Design principles for therapeutic angiogenic materials

NASA Astrophysics Data System (ADS)

Briquez, Priscilla S.; Clegg, Lindsay E.; Martino, Mikaël M.; Gabhann, Feilim Mac; Hubbell, Jeffrey A.

2016-01-01

Despite extensive research, pro-angiogenic drugs have failed to translate clinically, and therapeutic angiogenesis, which has potential in the treatment of various cardiovascular diseases, remains a major challenge. Physiologically, angiogenesis — the process of blood-vessel growth from existing vasculature — is regulated by a complex interplay of biophysical and biochemical cues from the extracellular matrix (ECM), angiogenic factors and multiple cell types. The ECM can be regarded as the natural 3D material that regulates angiogenesis. Here, we leverage knowledge of ECM properties to derive design rules for engineering pro-angiogenic materials. We propose that pro-angiogenic materials should be biomimetic, incorporate angiogenic factors and mimic cooperative interactions between growth factors and the ECM. We highlight examples of material designs that demonstrate these principles and considerations for designing better angiogenic materials.

Design principles for simulation games for learning clinical reasoning: A design-based research approach.

PubMed

Koivisto, J-M; Haavisto, E; Niemi, H; Haho, P; Nylund, S; Multisilta, J

2018-01-01

Nurses sometimes lack the competence needed for recognising deterioration in patient conditions and this is often due to poor clinical reasoning. There is a need to develop new possibilities for learning this crucial competence area. In addition, educators need to be future oriented; they need to be able to design and adopt new pedagogical innovations. The purpose of the study is to describe the development process and to generate principles for the design of nursing simulation games. A design-based research methodology is applied in this study. Iterative cycles of analysis, design, development, testing and refinement were conducted via collaboration among researchers, educators, students, and game designers. The study facilitated the generation of reusable design principles for simulation games to guide future designers when designing and developing simulation games for learning clinical reasoning. This study makes a major contribution to research on simulation game development in the field of nursing education. The results of this study provide important insights into the significance of involving nurse educators in the design and development process of educational simulation games for the purpose of nursing education. Copyright © 2017 Elsevier Ltd. All rights reserved.

How bioethics principles can aid design of electronic health records to accommodate patient granular control.

PubMed

Meslin, Eric M; Schwartz, Peter H

2015-01-01

Ethics should guide the design of electronic health records (EHR), and recognized principles of bioethics can play an important role. This approach was recently adopted by a team of informaticists who are designing and testing a system where patients exert granular control over who views their personal health information. While this method of building ethics in from the start of the design process has significant benefits, questions remain about how useful the application of bioethics principles can be in this process, especially when principles conflict. For instance, while the ethical principle of respect for autonomy supports a robust system of granular control, the principles of beneficence and nonmaleficence counsel restraint due to the danger of patients being harmed by restrictions on provider access to data. Conflict between principles has long been recognized by ethicists and has even motivated attacks on approaches that state and apply principles. In this paper, we show how using ethical principles can help in the design of EHRs by first explaining how ethical principles can and should be used generally, and then by discussing how attention to details in specific cases can show that the tension between principles is not as bad as it initially appeared. We conclude by suggesting ways in which the application of these (and other) principles can add value to the ongoing discussion of patient involvement in their health care. This is a new approach to linking principles to informatics design that we expect will stimulate further interest.

Design Principles for New Systems of Assessment

ERIC Educational Resources Information Center

Shepard, Lorrie A.; Penuel, William R.; Davidson, Kristen L.

2017-01-01

The Every Student Succeeds Act grants states new flexibility to create more balanced assessment systems with a greater role for formative assessment. Drawing on lessons learned over three decades of research and reform, we argue that state and local leaders should take the lead in designing new assessments guided by two core principles: First,…

Devising Principles of Design for Numeracy Tasks

ERIC Educational Resources Information Center

Geiger, Vince; Forgasz, Helen; Goos, Merrilyn; Bennison, Anne

2014-01-01

Numeracy is a fundamental component of the Australian National Curriculum as a General Capability identified in each F-10 subject. In this paper, we consider the principles of design necessary for the development of numeracy tasks specific to subjects other than mathematics--in this case, the subject of English. We explore the nature of potential…

Mechanical-Kinetic Modeling of a Molecular Walker from a Modular Design Principle

NASA Astrophysics Data System (ADS)

Hou, Ruizheng; Loh, Iong Ying; Li, Hongrong; Wang, Zhisong

2017-02-01

Artificial molecular walkers beyond burnt-bridge designs are complex nanomachines that potentially replicate biological walkers in mechanisms and functionalities. Improving the man-made walkers up to performance for widespread applications remains difficult, largely because their biomimetic design principles involve entangled kinetic and mechanical effects to complicate the link between a walker's construction and ultimate performance. Here, a synergic mechanical-kinetic model is developed for a recently reported DNA bipedal walker, which is based on a modular design principle, potentially enabling many directional walkers driven by a length-switching engine. The model reproduces the experimental data of the walker, and identifies its performance-limiting factors. The model also captures features common to the underlying design principle, including counterintuitive performance-construction relations that are explained by detailed balance, entropy production, and bias cancellation. While indicating a low directional fidelity for the present walker, the model suggests the possibility of improving the fidelity above 90% by a more powerful engine, which may be an improved version of the present engine or an entirely new engine motif, thanks to the flexible design principle. The model is readily adaptable to aid these experimental developments towards high-performance molecular walkers.

Reconfigurable manufacturing systems: Principles, design, and future trends

NASA Astrophysics Data System (ADS)

Koren, Yoram; Gu, Xi; Guo, Weihong

2018-06-01

Reconfigurable manufacturing systems (RMSs), which possess the advantages of both dedicated serial lines and flexible manufacturing systems, were introduced in the mid-1990s to address the challenges initiated by globalization. The principal goal of an RMS is to enhance the responsiveness of manufacturing systems to unforeseen changes in product demand. RMSs are costeffective because they boost productivity, and increase the lifetime of the manufacturing system. Because of the many streams in which a product may be produced on an RMS, maintaining product precision in an RMS is a challenge. But the experience with RMS in the last 20 years indicates that product quality can be definitely maintained by inserting in-line inspection stations. In this paper, we formulate the design and operational principles for RMSs, and provide a state-of-the-art review of the design and operations methodologies of RMSs according to these principles. Finally, we propose future research directions, and deliberate on how recent intelligent manufacturing technologies may advance the design and operations of RMSs.

Principles for designing future regimens for multidrug-resistant tuberculosis.

PubMed

Brigden, Grania; Nyang'wa, Bern-Thomas; du Cros, Philipp; Varaine, Francis; Hughes, Jennifer; Rich, Michael; Horsburgh, C Robert; Mitnick, Carole D; Nuermberger, Eric; McIlleron, Helen; Phillips, Patrick P J; Balasegaram, Manica

2014-01-01

Fewer than 20% of patients with multidrug-resistant (MDR) tuberculosis are receiving treatment and there is an urgent need to scale up treatment programmes. One of the biggest barriers to scale-up is the treatment regimen, which is lengthy, complex, ineffective, poorly tolerated and expensive. For the first time in over 50 years, new drugs have been developed specifically to treat tuberculosis, with bedaquiline and potentially delamanid expected to be available soon for treatment of MDR cases. However, if the new drugs are merely added to the current treatment regimen, the new regimen will be at least as lengthy, cumbersome and toxic as the existing one. There is an urgent need for strategy and evidence on how to maximize the potential of the new drugs to improve outcomes and shorten treatment. We devised eight key principles for designing future treatment regimens to ensure that, once they are proven safe in clinical trials, they will be clinically effective and programmatically practicable. Regimens should contain at least one new class of drug; be broadly applicable for use against MDR and extensively drug-resistant Mycobacterium tuberculosis complex strains; contain three to five effective drugs, each from a different drug class; be delivered orally; have a simple dosing schedule; have a good side-effect profile that allows limited monitoring; last a maximum of 6 months; and have minimal interaction with antiretrovirals. Following these principles will maximize the potential of new compounds and help to overcome the clinical and programmatic disadvantages and scale-up constraints that plague the current regimen.

Design Principles of Next-Generation Digital Gaming for Education.

ERIC Educational Resources Information Center

Squire, Kurt; Jenkins, Henry; Holland, Walter; Miller, Heather; O'Driscoll, Alice; Tan, Katie Philip; Todd, Katie.

2003-01-01

Discusses the rapid growth of digital games, describes research at MIT that is exploring the potential of digital games for supporting learning, and offers hypotheses about the design of next-generation educational video and computer games. Highlights include simulations and games; and design principles, including context and using information to…

Proof-of-principle experiment of reference-frame-independent quantum key distribution with phase coding

PubMed Central

Liang, Wen-Ye; Wang, Shuang; Li, Hong-Wei; Yin, Zhen-Qiang; Chen, Wei; Yao, Yao; Huang, Jing-Zheng; Guo, Guang-Can; Han, Zheng-Fu

2014-01-01

We have demonstrated a proof-of-principle experiment of reference-frame-independent phase coding quantum key distribution (RFI-QKD) over an 80-km optical fiber. After considering the finite-key bound, we still achieve a distance of 50 km. In this scenario, the phases of the basis states are related by a slowly time-varying transformation. Furthermore, we developed and realized a new decoy state method for RFI-QKD systems with weak coherent sources to counteract the photon-number-splitting attack. With the help of a reference-frame-independent protocol and a Michelson interferometer with Faraday rotator mirrors, our system is rendered immune to the slow phase changes of the interferometer and the polarization disturbances of the channel, making the procedure very robust. PMID:24402550

Four principles for user interface design of computerised clinical decision support systems.

PubMed

Kanstrup, Anne Marie; Christiansen, Marion Berg; Nøhr, Christian

2011-01-01

The paper presents results from a design research project of a user interface (UI) for a Computerised Clinical Decision Support System (CDSS). The ambition has been to design Human-Computer Interaction (HCI) that can minimise medication errors. Through an iterative design process a digital prototype for prescription of medicine has been developed. This paper presents results from the formative evaluation of the prototype conducted in a simulation laboratory with ten participating physicians. Data from the simulation is analysed by use of theory on how users perceive information. The conclusion is a model, which sum up four principles of interaction for design of CDSS. The four principles for design of user interfaces for CDSS are summarised as four A's: All in one, At a glance, At hand and Attention. The model emphasises integration of all four interaction principles in the design of user interfaces for CDSS, i.e. the model is an integrated model which we suggest as a guide for interaction design when working with preventing medication errors.

Design principles for shift current photovoltaics

DOE PAGES

Cook, Ashley M.; M. Fregoso, Benjamin; de Juan, Fernando; ...

2017-01-25

While the basic principles of conventional solar cells are well understood, little attention has gone towards maximizing the efficiency of photovoltaic devices based on shift currents. Furthermore, by analysing effective models, here we outline simple design principles for the optimization of shift currents for frequencies near the band gap. This method allows us to express the band edge shift current in terms of a few model parameters and to show it depends explicitly on wavefunctions in addition to standard band structure. We use our approach to identify two classes of shift current photovoltaics, ferroelectric polymer films and single-layer orthorhombic monochalcogenidesmore » such as GeS, which display the largest band edge responsivities reported so far. Moreover, exploring the parameter space of the tight-binding models that describe them we find photoresponsivities that can exceed 100 mA W -1 . Our results illustrate the great potential of shift current photovoltaics to compete with conventional solar cells.« less

Design principles for shift current photovoltaics

PubMed Central

Cook, Ashley M.; M. Fregoso, Benjamin; de Juan, Fernando; Coh, Sinisa; Moore, Joel E.

2017-01-01

While the basic principles of conventional solar cells are well understood, little attention has gone towards maximizing the efficiency of photovoltaic devices based on shift currents. By analysing effective models, here we outline simple design principles for the optimization of shift currents for frequencies near the band gap. Our method allows us to express the band edge shift current in terms of a few model parameters and to show it depends explicitly on wavefunctions in addition to standard band structure. We use our approach to identify two classes of shift current photovoltaics, ferroelectric polymer films and single-layer orthorhombic monochalcogenides such as GeS, which display the largest band edge responsivities reported so far. Moreover, exploring the parameter space of the tight-binding models that describe them we find photoresponsivities that can exceed 100 mA W−1. Our results illustrate the great potential of shift current photovoltaics to compete with conventional solar cells. PMID:28120823

Design principles for shift current photovoltaics

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cook, Ashley M.; M. Fregoso, Benjamin; de Juan, Fernando

While the basic principles of conventional solar cells are well understood, little attention has gone towards maximizing the efficiency of photovoltaic devices based on shift currents. Furthermore, by analysing effective models, here we outline simple design principles for the optimization of shift currents for frequencies near the band gap. This method allows us to express the band edge shift current in terms of a few model parameters and to show it depends explicitly on wavefunctions in addition to standard band structure. We use our approach to identify two classes of shift current photovoltaics, ferroelectric polymer films and single-layer orthorhombic monochalcogenidesmore » such as GeS, which display the largest band edge responsivities reported so far. Moreover, exploring the parameter space of the tight-binding models that describe them we find photoresponsivities that can exceed 100 mA W -1 . Our results illustrate the great potential of shift current photovoltaics to compete with conventional solar cells.« less

Computer-based teaching module design: principles derived from learning theories.

PubMed

Lau, K H Vincent

2014-03-01

The computer-based teaching module (CBTM), which has recently gained prominence in medical education, is a teaching format in which a multimedia program serves as a single source for knowledge acquisition rather than playing an adjunctive role as it does in computer-assisted learning (CAL). Despite empirical validation in the past decade, there is limited research into the optimisation of CBTM design. This review aims to summarise research in classic and modern multimedia-specific learning theories applied to computer learning, and to collapse the findings into a set of design principles to guide the development of CBTMs. Scopus was searched for: (i) studies of classic cognitivism, constructivism and behaviourism theories (search terms: 'cognitive theory' OR 'constructivism theory' OR 'behaviourism theory' AND 'e-learning' OR 'web-based learning') and their sub-theories applied to computer learning, and (ii) recent studies of modern learning theories applied to computer learning (search terms: 'learning theory' AND 'e-learning' OR 'web-based learning') for articles published between 1990 and 2012. The first search identified 29 studies, dominated in topic by the cognitive load, elaboration and scaffolding theories. The second search identified 139 studies, with diverse topics in connectivism, discovery and technical scaffolding. Based on their relative representation in the literature, the applications of these theories were collapsed into a list of CBTM design principles. Ten principles were identified and categorised into three levels of design: the global level (managing objectives, framing, minimising technical load); the rhetoric level (optimising modality, making modality explicit, scaffolding, elaboration, spaced repeating), and the detail level (managing text, managing devices). This review examined the literature in the application of learning theories to CAL to develop a set of principles that guide CBTM design. Further research will enable educators to

Novel Natural Convection Heat Sink Design Concepts From First Principles

DTIC Science & Technology

2016-06-01

NAVAL POSTGRADUATE SCHOOL MONTEREY, CALIFORNIA THESIS Approved for public release; distribution is unlimited NOVEL NATURAL ...COVERED Master’s Thesis 4. TITLE AND SUBTITLE NOVEL NATURAL CONVECTION HEAT SINK DESIGN CONCEPTS FROM FIRST PRINCIPLES 5. FUNDING NUMBERS 6...geometric structures that incorporate the principles of the stack effect to improve the heat transfer capability of a heat sink under natural convection

Design principles for nuclease-deficient CRISPR-based transcriptional regulators

PubMed Central

Jensen, Michael K

2018-01-01

Abstract The engineering of Clustered Regularly Interspaced Short Palindromic Repeats (CRISPR)-CRISPR-associated proteins continues to expand the toolkit available for genome editing, reprogramming gene regulation, genome visualisation and epigenetic studies of living organisms. In this review, the emerging design principles on the use of nuclease-deficient CRISPR-based reprogramming of gene expression will be presented. The review will focus on the designs implemented in yeast both at the level of CRISPR proteins and guide RNA (gRNA), but will lend due credits to the seminal studies performed in other species where relevant. In addition to design principles, this review also highlights applications benefitting from the use of CRISPR-mediated transcriptional regulation and discusses the future directions to further expand the toolkit for nuclease-deficient reprogramming of genomes. As such, this review should be of general interest for experimentalists to get familiarised with the parameters underlying the power of reprogramming genomic functions by use of nuclease-deficient CRISPR technologies. PMID:29726937

Design principles for nuclease-deficient CRISPR-based transcriptional regulators.

PubMed

Jensen, Michael K

2018-06-01

The engineering of Clustered Regularly Interspaced Short Palindromic Repeats (CRISPR)-CRISPR-associated proteins continues to expand the toolkit available for genome editing, reprogramming gene regulation, genome visualisation and epigenetic studies of living organisms. In this review, the emerging design principles on the use of nuclease-deficient CRISPR-based reprogramming of gene expression will be presented. The review will focus on the designs implemented in yeast both at the level of CRISPR proteins and guide RNA (gRNA), but will lend due credits to the seminal studies performed in other species where relevant. In addition to design principles, this review also highlights applications benefitting from the use of CRISPR-mediated transcriptional regulation and discusses the future directions to further expand the toolkit for nuclease-deficient reprogramming of genomes. As such, this review should be of general interest for experimentalists to get familiarised with the parameters underlying the power of reprogramming genomic functions by use of nuclease-deficient CRISPR technologies.

Representing Clarity: Using Universal Design Principles to Create Effective Hybrid Course Learning Materials

ERIC Educational Resources Information Center

Spiegel, Cheri Lemieux

2012-01-01

This article describes how the author applied principles of universal design to hybrid course materials to increase student understanding and, ultimately, success. Pulling the three principles of universal design--consistency, color, and icon representation--into the author's Blackboard course allowed her to change the types of reading skills…

PubMed on Tap: discovering design principles for online information delivery to handheld computers.

PubMed

Hauser, Susan E; Demner-Fushman, Dina; Ford, Glenn; Thoma, George R

2004-01-01

Online access to biomedical information from handheld computers will be a valuable adjunct to other popular medical applications if information delivery systems are designed with handheld computers in mind. The goal of this project is to discover design principles to facilitate practitioners' access to online medical information at the point-of-care. A prototype system was developed to serve as a testbed for this research. Using the testbed, an initial evaluation has yielded several user interface design principles. Continued research is expected to discover additional user interface design principles as well as guidelines for results organization and system performance

First principles design of a core bioenergetic transmembrane electron-transfer protein

DOE Office of Scientific and Technical Information (OSTI.GOV)

Goparaju, Geetha; Fry, Bryan A.; Chobot, Sarah E.

Here we describe the design, Escherichia coli expression and characterization of a simplified, adaptable and functionally transparent single chain 4-α-helix transmembrane protein frame that binds multiple heme and light activatable porphyrins. Such man-made cofactor-binding oxidoreductases, designed from first principles with minimal reference to natural protein sequences, are known as maquettes. This design is an adaptable frame aiming to uncover core engineering principles governing bioenergetic transmembrane electron-transfer function and recapitulate protein archetypes proposed to represent the origins of photosynthesis. This article is part of a Special Issue entitled Biodesign for Bioenergetics — the design and engineering of electronic transfer cofactors, proteinsmore » and protein networks, edited by Ronald L. Koder and J.L. Ross Anderson.« less

Research-Informed Principles for (Re)Designing Teaching and Learning Spaces

ERIC Educational Resources Information Center

Finkelstein, Adam; Ferris, Jennie; Weston, Cynthia; Winer, Laura

2016-01-01

Designing physical learning environments that connect to indicators of effective educational practice reflects a university's pedagogical commitment to student success. This article describes an approach to teaching and learning space design based on research-informed pedagogical principles successfully implemented at our university. It then…

Concept design theory and model for multi-use space facilities: Analysis of key system design parameters through variance of mission requirements

NASA Astrophysics Data System (ADS)

Reynerson, Charles Martin

This research has been performed to create concept design and economic feasibility data for space business parks. A space business park is a commercially run multi-use space station facility designed for use by a wide variety of customers. Both space hardware and crew are considered as revenue producing payloads. Examples of commercial markets may include biological and materials research, processing, and production, space tourism habitats, and satellite maintenance and resupply depots. This research develops a design methodology and an analytical tool to create feasible preliminary design information for space business parks. The design tool is validated against a number of real facility designs. Appropriate model variables are adjusted to ensure that statistical approximations are valid for subsequent analyses. The tool is used to analyze the effect of various payload requirements on the size, weight and power of the facility. The approach for the analytical tool was to input potential payloads as simple requirements, such as volume, weight, power, crew size, and endurance. In creating the theory, basic principles are used and combined with parametric estimation of data when necessary. Key system parameters are identified for overall system design. Typical ranges for these key parameters are identified based on real human spaceflight systems. To connect the economics to design, a life-cycle cost model is created based upon facility mass. This rough cost model estimates potential return on investments, initial investment requirements and number of years to return on the initial investment. Example cases are analyzed for both performance and cost driven requirements for space hotels, microgravity processing facilities, and multi-use facilities. In combining both engineering and economic models, a design-to-cost methodology is created for more accurately estimating the commercial viability for multiple space business park markets.

The statistical fluctuation study of quantum key distribution in means of uncertainty principle

NASA Astrophysics Data System (ADS)

Liu, Dunwei; An, Huiyao; Zhang, Xiaoyu; Shi, Xuemei

2018-03-01

Laser defects in emitting single photon, photon signal attenuation and propagation of error cause our serious headaches in practical long-distance quantum key distribution (QKD) experiment for a long time. In this paper, we study the uncertainty principle in metrology and use this tool to analyze the statistical fluctuation of the number of received single photons, the yield of single photons and quantum bit error rate (QBER). After that we calculate the error between measured value and real value of every parameter, and concern the propagation error among all the measure values. We paraphrase the Gottesman-Lo-Lutkenhaus-Preskill (GLLP) formula in consideration of those parameters and generate the QKD simulation result. In this study, with the increase in coding photon length, the safe distribution distance is longer and longer. When the coding photon's length is N = 10^{11}, the safe distribution distance can be almost 118 km. It gives a lower bound of safe transmission distance than without uncertainty principle's 127 km. So our study is in line with established theory, but we make it more realistic.

Integrating Quality Matters into Hybrid Course Design: A Principles of Marketing Case Study

ERIC Educational Resources Information Center

Young, Mark R.

2014-01-01

Previous research supports the idea that the success of hybrid or online delivery modes is more a function of course design than delivery media. This article describes a case study of a hybrid Principles of Marketing course that implemented a comprehensive redesign based on design principles espoused by the Quality Matters Program, a center for…

Design principles of water sensitive in settlement area on the river banks

NASA Astrophysics Data System (ADS)

Ryanti, E.; Hasriyanti, N.; Utami, W. D.

2018-03-01

This research will formulate the principle of designing settlement area of Kapuas River Pontianak with the approach of water sensitive concept of urban design (WSUD) the densely populated settlement area. By using a case study the approach that is a dense settlement area located on the banks of the river with literature study techniques to formulate the aspects considered and components that are set in the design, descriptive analysis with the rationalistic paradigm for identification characteristics of the settlement in the river banks areas with consideration of WSUD elements and formulate the principles of designing water-sensitive settlement areas. This research is important to do because the problems related to the water management system in the existing riverside settlement in Pontianak has not been maximal to do. So the primary of this research contains several objectives that will be achieved that is identifying the characteristics of riverside settlement area based on consideration of design aspects of the area that are sensitive to water and the principle of designing the area so that the existing problem structure will be formulated in relation to the community’s need for infrastructure in settlement environment and formulate and develop appropriate technology guidelines for integrated water management systems in riverside settlement areas and design techniques for water-sensitive settlements (WSUD).

Powerful Design Principles and Processes: Lessons from a Case of Ambitious Civics Education Curriculum Planning. A Response to "Reinventing the High School Government Course: Rigor, Simulations, and Learning from Text"

ERIC Educational Resources Information Center

Dinkelman, Todd

2016-01-01

In "Reinventing the High School Government Course," the authors presented the latest iteration of an ambitious AP government course developed over a seven-year design-based implementation research project. Chiefly addressed to curriculum developers and civics teachers, the article elaborates key design principles, provides a description…

Design Principles for Nickel/Hydrogen Cells and Batteries

NASA Technical Reports Server (NTRS)

Thaller, Lawrence H.; Manzo, Michelle A.; Gonzalez-Sanabria, Olga D.

1987-01-01

Individual-pressure-vessel (IPV) nickel/hydrogen cells and bipolar batteries developed for use as energy-storage subsystems for satelite applications. Design principles applied draw upon extensive background in separator technology, alkaline-fuel-cell technology and several alkaline-cell technology areas. Principals are rather straightforward applications of capillary-force formalisms, coupled with slowly developing data base resulting from careful post-test analyses. Based on preconceived assumptions relative to how devices work and how to be designed so they display longer cycle lives at deep discharge.

Design Principles for Cell Phone Learning in EFL

ERIC Educational Resources Information Center

Wang, Feihong

2010-01-01

Cell phone learning (C-learning), as an instructional approach, has been gaining more and more attention in the field of teaching English as a foreign language (EFL) in the last 10 years. While studies have proved C-learning an effective instructional approach in research settings, a review of literature indicates the lack of design principles to…

Elements and Principles of Design Posters. Teacher's Guide.

ERIC Educational Resources Information Center

1996

This book accompanies a poster series and allows the teacher to pre-plan a lesson or activity for students with the objectives shown for each element or principle of design to be presented. Along with a black-and-white reproduction of each poster, major concepts are discussed. Suggested student activities relating to a particular element or…

Design principles for engaging and retaining virtual citizen scientists.

PubMed

Wald, Dara M; Longo, Justin; Dobell, A R

2016-06-01

Citizen science initiatives encourage volunteer participants to collect and interpret data and contribute to formal scientific projects. The growth of virtual citizen science (VCS), facilitated through websites and mobile applications since the mid-2000s, has been driven by a combination of software innovations and mobile technologies, growing scientific data flows without commensurate increases in resources to handle them, and the desire of internet-connected participants to contribute to collective outputs. However, the increasing availability of internet-based activities requires individual VCS projects to compete for the attention of volunteers and promote their long-term retention. We examined program and platform design principles that might allow VCS initiatives to compete more effectively for volunteers, increase productivity of project participants, and retain contributors over time. We surveyed key personnel engaged in managing a sample of VCS projects to identify the principles and practices they pursued for these purposes and led a team in a heuristic evaluation of volunteer engagement, website or application usability, and participant retention. We received 40 completed survey responses (33% response rate) and completed a heuristic evaluation of 20 VCS program sites. The majority of the VCS programs focused on scientific outcomes, whereas the educational and social benefits of program participation, variables that are consistently ranked as important for volunteer engagement and retention, were incidental. Evaluators indicated usability, across most of the VCS program sites, was higher and less variable than the ratings for participant engagement and retention. In the context of growing competition for the attention of internet volunteers, increased attention to the motivations of virtual citizen scientists may help VCS programs sustain the necessary engagement and retention of their volunteers. © 2016 Society for Conservation Biology.

Elastohydrodynamic principles applied to the design of helicopter components.

NASA Technical Reports Server (NTRS)

Townsend, D. P.

1973-01-01

Elastohydrodynamic principles affecting the lubrication of transmission components are presented and discussed. Surface temperatures of the transmission bearings and gears affect elastohydrodynamic film thickness. Traction forces and sliding as well as the inlet temperature determine surface temperatures. High contact ratio gears cause increased sliding and may run at higher surface temperatures. Component life is a function of the ratio of elastohydrodynamic film thickness to composite surface roughness. Lubricant starvation reduces elastohydrodynamic film thickness and increases surface temperatures. Methods are presented which allow for the application of elastohydrodynamic principles to transmission design in order to increase system life and reliability.

Elastohydrodynamic principles applied to the design of helicopter components

NASA Technical Reports Server (NTRS)

Townsend, D. P.

1973-01-01

Elastohydrodynamic principles affecting the lubrication of transmission components are presented and discussed. Surface temperature of the transmission bearings and gears affect elastohydrodynamic film thickness. Traction forces and sliding as well as the inlet temperature determine surface temperatures. High contact ratio gears cause increased sliding and may run at higher surface temperatures. Component life is a function of the ratio of elastohydrodynamic film thickness to composite surface roughness. Lubricant starvation reduces elastrohydrodynamic film thickness and increases surface temperatures. Methods are presented which allow for the application of elastohydrodynamic principles to transmission design in order to increase system life and reliability.

Using the Movies to Illustrate the Principles of Experimental Design

ERIC Educational Resources Information Center

Strelan, Peter

2018-01-01

This article presents an innovative technique for teaching the principles of experimental design in a way that is entertaining and engaging for students. Following a lecture on experimental design, students participate in an experiment in which the teacher uses a funny segment from a movie to test the influence of implicit social norms. Randomly…

Design principles and field performance of a solar spectral irradiance meter

DOE Office of Scientific and Technical Information (OSTI.GOV)

Tatsiankou, V.; Hinzer, K.; Haysom, J.

2016-08-01

A solar spectral irradiance meter (SSIM), designed for measuring the direct normal irradiance (DNI) in six wavelength bands, has been combined with models to determine key atmospheric transmittances and the resulting spectral irradiance distribution of DNI under all sky conditions. The design principles of the SSIM, implementation of a parameterized transmittance model, and field performance comparisons of modeled solar spectra with reference radiometer measurements are presented. Two SSIMs were tested and calibrated at the National Renewable Energy Laboratory (NREL) against four spectroradiometers and an absolute cavity radiometer. The SSIMs' DNI was on average within 1% of the DNI values reportedmore » by one of NREL's primary absolute cavity radiometers. An additional SSIM was installed at the SUNLAB Outdoor Test Facility in September 2014, with ongoing collection of environmental and spectral data. The SSIM's performance in Ottawa was compared against a commercial pyrheliometer and a spectroradiometer over an eight month study. The difference in integrated daily spectral irradiance between the SSIM and the ASD spectroradiometer was found to be less than 1%. The cumulative energy density collected by the SSIM over this duration agreed with that measured by an Eppley model NIP pyrheliometer to within 0.5%. No degradation was observed.« less

Operationalising the Lean principles in maternity service design using 3P methodology

PubMed Central

Smith, Iain

2016-01-01

The last half century has seen significant changes to Maternity services in England. Though rates of maternal and infant mortality have fallen to very low levels, this has been achieved largely through hospital admission. It has been argued that maternity services may have become over-medicalised and service users have expressed a preference for more personalised care. NHS England's national strategy sets out a vision for a modern maternity service that continues to deliver safe care whilst also adopting the principles of personalisation. Therefore, there is a need to develop maternity services that balance safety with personal choice. To address this challenge, a maternity unit in North East England considered improving their service through refurbishment or building new facilities. Using a design process known as the production preparation process (or 3P), the Lean principles of understanding user value, mapping value-streams, creating flow, developing pull processes and continuous improvement were applied to the design of a new maternity department. Multiple stakeholders were engaged in the design through participation in a time-out (3P) workshop in which an innovative pathway and facility for maternity services were co-designed. The team created a hybrid model that they described as “wrap around care” in which the Lean concept of pull was applied to create a service and facility design in which expectant mothers were put at the centre of care with clinicians, skills, equipment and supplies drawn towards them in line with acuity changes as needed. Applying the Lean principles using the 3P method helped stakeholders to create an innovative design in line with the aspirations and objectives of the National Maternity Review. The case provides a practical example of stakeholders applying the Lean principles to maternity services and demonstrates the potential applicability of the Lean 3P approach to design healthcare services in line with policy requirements

Operationalising the Lean principles in maternity service design using 3P methodology.

PubMed

Smith, Iain

2016-01-01

The last half century has seen significant changes to Maternity services in England. Though rates of maternal and infant mortality have fallen to very low levels, this has been achieved largely through hospital admission. It has been argued that maternity services may have become over-medicalised and service users have expressed a preference for more personalised care. NHS England's national strategy sets out a vision for a modern maternity service that continues to deliver safe care whilst also adopting the principles of personalisation. Therefore, there is a need to develop maternity services that balance safety with personal choice. To address this challenge, a maternity unit in North East England considered improving their service through refurbishment or building new facilities. Using a design process known as the production preparation process (or 3P), the Lean principles of understanding user value, mapping value-streams, creating flow, developing pull processes and continuous improvement were applied to the design of a new maternity department. Multiple stakeholders were engaged in the design through participation in a time-out (3P) workshop in which an innovative pathway and facility for maternity services were co-designed. The team created a hybrid model that they described as "wrap around care" in which the Lean concept of pull was applied to create a service and facility design in which expectant mothers were put at the centre of care with clinicians, skills, equipment and supplies drawn towards them in line with acuity changes as needed. Applying the Lean principles using the 3P method helped stakeholders to create an innovative design in line with the aspirations and objectives of the National Maternity Review. The case provides a practical example of stakeholders applying the Lean principles to maternity services and demonstrates the potential applicability of the Lean 3P approach to design healthcare services in line with policy requirements.

Findings in Experimental Psychology as Functioning Principles of Theatrical Design.

ERIC Educational Resources Information Center

Caldwell, George

A gestalt approach to theatrical design seems to provide some ready and stable explanations for a number of issues in the scenic arts. Gestalt serves as the theoretical base for a number of experiments in psychology whose findings appear to delineate the principles of art to be used in scene design. The fundamental notion of gestalt theory…

Urban Principle of Water Sensitive Design in Kampung Kamboja at Pontianak City

NASA Astrophysics Data System (ADS)

Hasriyanti, N.; Ryanti, E.

2017-07-01

This study will define the design principles of settlement area banks of the Kapuas Pontianak to approach the concept of water sensitive urban design (WSUD) in densely populated residential areas. Using a case study of a region densely located on the banks of the river with engineering literature to formulate the aspects taken into consideration and the components are arranged in the design, analysis descriptive paradigm rationalistic to identify the characteristics of residential areas riverbank with consideration of elements WSUD and formulate design principles residential area that is sensitive to water. This research is important to do because of problems related to the water management system in the settlement bank of the river in the city of Pontianak do not maximize. So that the primacy of this study contains several objectives to be achieved is to identify the characteristics of the settlement area riverbanks under consideration aspects areas design that is sensitive to water and principle areas design that will formulate the structure of the existing problems related to the needs of the community infrastructure facilities infrastructure neighborhoods and formulate and create guidelines for appropriate technology for integrated water management systems in the residential area of the riverbank and engineering design for the settlements are sensitive to water (WSUD). The final aim of the study is expected to achieve water management systems in residential areas by utilizing the abundant rainwater availability by using LID (Low Impact Development) through the concept of urban design that sensitive water

How to Present Evidence-Based Usability Design Principles Dedicated to Medication-Related Alerting Systems to Designers and Evaluators? Results from a Workshop.

PubMed

Marcilly, Romaric; Monkman, Helen; Villumsen, Sidsel; Kaufman, David; Beuscart-Zephir, Marie-Catherine

2016-01-01

Medication alerting system use errors and lack of adoption are often attributed to usability issues. Previous work has used evidence from the literature to reveal usability principles specific to medication alerting systems and identify potential consequences of violating these principles. The current study sought to explore how best to convey these principles to designers and evaluators of these systems to facilitate their work. To this aim, a workshop with 19 participants was used to generate ideas and opinions on how to deliver these topic-specific design principles in a way that would be most helpful for them. Participants generated ideas for how (e.g., a collaborative, continuously updated forum) and what (e.g., illustrations, checklists, evidence sources and strength, consequences of violations) information is most useful to disseminate usability principles for medication alerting systems. Participants, especially designers, expressed desire to use these principles in practice and avoid previously documented mistakes and therefore make design and evaluation of these systems more effective and efficient. Those insights are discussed in terms of feasibility and logistical challenges to developing the proposed documentation). To move this work forward, a more collaborative approach of Human Factors specialists in medical informatics is necessary.

Turning challenges into design principles: Telemonitoring systems for patients with multiple chronic conditions.

PubMed

Sultan, Mehwish; Kuluski, Kerry; McIsaac, Warren J; Cafazzo, Joseph A; Seto, Emily

2018-01-01

People with multiple chronic conditions often struggle with managing their health. The purpose of this research was to identify specific challenges of patients with multiple chronic conditions and to use the findings to form design principles for a telemonitoring system tailored for these patients. Semi-structured interviews with 15 patients with multiple chronic conditions and 10 clinicians were conducted to gain an understanding of their needs and preferences for a smartphone-based telemonitoring system. The interviews were analyzed using a conventional content analysis technique, resulting in six themes. Design principles developed from the themes included that the system must be modular to accommodate various combinations of conditions, reinforce a routine, consolidate record keeping, as well as provide actionable feedback to the patients. Designing an application for multiple chronic conditions is complex due to variability in patient conditions, and therefore, design principles developed in this study can help with future innovations aimed to help manage this population.

Top 10 principles for designing healthy coastal ecosystems

USGS Publications Warehouse

Gaydos, Joseph K.; Dierauf, Leslie; Kirby, Grant; Brosnan, Deborah; Gilardi, Kirsten; Davis, Gary E.

2008-01-01

Like other coastal zones around the world, the inland sea ecosystem of Washington (USA) and British Columbia (Canada), an area known as the Salish Sea, is changing under pressure from a growing human population, conversion of native forest and shoreline habitat to urban development, toxic contamination of sediments and species, and overharvest of resources. While billions of dollars have been spent trying to restore other coastal ecosystems around the world, there still is no successful model for restoring estuarine or marine ecosystems like the Salish Sea. Despite the lack of a guiding model, major ecological principles do exist that should be applied as people work to design the Salish Sea and other large marine ecosystems for the future. We suggest that the following 10 ecological principles serve as a foundation for educating the public and for designing a healthy Salish Sea and other coastal ecosystems for future generations: (1) Think ecosystem: political boundaries are arbitrary; (2) Account for ecosystem connectivity; (3) Understand the food web; (4) Avoid fragmentation; (5) Respect ecosystem integrity; (6) Support nature's resilience; (7) Value nature: it's money in your pocket; (8) Watch wildlife health; (9) Plan for extremes; and (10) Share the knowledge.

Just-in-Time Adaptive Interventions (JITAIs) in Mobile Health: Key Components and Design Principles for Ongoing Health Behavior Support.

PubMed

Nahum-Shani, Inbal; Smith, Shawna N; Spring, Bonnie J; Collins, Linda M; Witkiewitz, Katie; Tewari, Ambuj; Murphy, Susan A

2018-05-18

The just-in-time adaptive intervention (JITAI) is an intervention design aiming to provide the right type/amount of support, at the right time, by adapting to an individual's changing internal and contextual state. The availability of increasingly powerful mobile and sensing technologies underpins the use of JITAIs to support health behavior, as in such a setting an individual's state can change rapidly, unexpectedly, and in his/her natural environment. Despite the increasing use and appeal of JITAIs, a major gap exists between the growing technological capabilities for delivering JITAIs and research on the development and evaluation of these interventions. Many JITAIs have been developed with minimal use of empirical evidence, theory, or accepted treatment guidelines. Here, we take an essential first step towards bridging this gap. Building on health behavior theories and the extant literature on JITAIs, we clarify the scientific motivation for JITAIs, define their fundamental components, and highlight design principles related to these components. Examples of JITAIs from various domains of health behavior research are used for illustration. As we enter a new era of technological capacity for delivering JITAIs, it is critical that researchers develop sophisticated and nuanced health behavior theories capable of guiding the construction of such interventions. Particular attention has to be given to better understanding the implications of providing timely and ecologically sound support for intervention adherence and retention.

Design Principles of Bioresorbable Polymeric Scaffolds.

PubMed

Kossuth, Mary Beth; Perkins, Laura E L; Rapoza, Richard J

2016-07-01

The concept for a bioresorbable vascular scaffold combines the best features of the first 3 generations of percutaneous coronary intervention (namely), balloon angioplasty, bare metallic stents, and drug-eluting stents, into a single device. The principles of operation of a BRS follow 3 phases of functionality that reflect the different physiologic requirements over time; revascularization, restoration, and resorption. Most BRS designs make use of the continuum of hydrolytic degradation in aliphatic polyesters, such as poly(l-lactide), in which molecular weight, strength, and mass decrease progressively in 3 distinct stages, consistent with the in vivo requirements of each performance phase. Copyright © 2016 Elsevier Inc. All rights reserved.

Visual Design Principles Applied To World Wide Web Construction.

ERIC Educational Resources Information Center

Luck, Donald D.; Hunter, J. Mark

This paper describes basic types of World Wide Web pages and presents design criteria for page layout based on principles of visual literacy. Discussion focuses on pages that present information in the following styles: billboard; directory/index; textual; and graphics. Problems and solutions in Web page construction are explored according to…

Design principles for robust oscillatory behavior.

PubMed

Castillo-Hair, Sebastian M; Villota, Elizabeth R; Coronado, Alberto M

2015-09-01

Oscillatory responses are ubiquitous in regulatory networks of living organisms, a fact that has led to extensive efforts to study and replicate the circuits involved. However, to date, design principles that underlie the robustness of natural oscillators are not completely known. Here we study a three-component enzymatic network model in order to determine the topological requirements for robust oscillation. First, by simulating every possible topological arrangement and varying their parameter values, we demonstrate that robust oscillators can be obtained by augmenting the number of both negative feedback loops and positive autoregulations while maintaining an appropriate balance of positive and negative interactions. We then identify network motifs, whose presence in more complex topologies is a necessary condition for obtaining oscillatory responses. Finally, we pinpoint a series of simple architectural patterns that progressively render more robust oscillators. Together, these findings can help in the design of more reliable synthetic biomolecular networks and may also have implications in the understanding of other oscillatory systems.

Ten Guiding Principles for Designing Online Modules That Involve International Collaborations

ERIC Educational Resources Information Center

Porcaro, David; Carrier, Carol

2014-01-01

As ideas and personnel flow across borders, there are many opportunities for instructional designers to collaboratively design online modules with international teams. These collaborations can take many shapes, as varying levels of localization and within-team communication are employed. This paper looks at ten guiding principles that are shaping…

In Search of Design Principles for Developing Digital Learning and Performance Support for a Student Design Task

ERIC Educational Resources Information Center

Bollen, Lars; van der Meij, Hans; Leemkuil, Henny; McKenney, Susan

2015-01-01

A digital learning and performance support environment for university student design tasks was developed. This paper describes on the design rationale, process, and the usage results to arrive at a core set of design principles for the construction of such an environment. We present a collection of organizational, technical, and course-related…

Designing future landscapes from principles of form and function

Treesearch

Larry D. Harris; Patrick Kangas

1979-01-01

Future landscapes will consist of a gradient of types ranging from wilderness areas to totally "humanized" environments. The man-dominated landscapes will be required to fulfill multiple functions only one of which is aesthetic enjoyment. It is suggested that basic principles of form and function may contribute to design criteria. Applications to the...

Design principles of a rotating medium speed mechanism

NASA Technical Reports Server (NTRS)

Hostenkamp, R. G.; Achtermann, E.; Bentall, R. H.

1976-01-01

Design principles of a medium speed mechanism (MSM) are presented, including discussion on the relative merits of beryllium and aluminium as structural materials. Rotating at a speed of 60 rpm, the application envisaged for the MSM was as a despin bearing for the despun platform or despun antenna of a spin stabilized satellite. The MSM was built and tested to qualification level and is currently undergoing real time life testing.

Ergonomics and design: its principles applied in the industry.

PubMed

Tavares, Ademario Santos; Silva, Francisco Nilson da

2012-01-01

Industrial Design encompasses both product development and optimization of production process. In this sense, Ergonomics plays a fundamental role, because its principles, methods and techniques can help operators to carry out their tasks most successfully. A case study carried out in an industry shows that the interaction among Design, Production Engineering and Materials Engineering departments may improve some aspects concerned security, comfort, efficiency and performance. In this process, Ergonomics had shown to be of essential importance to strategic decision making to the improvement of production section.

Just-in-Time Adaptive Interventions (JITAIs) in Mobile Health: Key Components and Design Principles for Ongoing Health Behavior Support

PubMed Central

Nahum-Shani, Inbal; Smith, Shawna N.; Spring, Bonnie J.; Collins, Linda M.; Witkiewitz, Katie; Tewari, Ambuj; Murphy, Susan A.

2016-01-01

Background The just-in-time adaptive intervention (JITAI) is an intervention design aiming to provide the right type/amount of support, at the right time, by adapting to an individual's changing internal and contextual state. The availability of increasingly powerful mobile and sensing technologies underpins the use of JITAIs to support health behavior, as in such a setting an individual's state can change rapidly, unexpectedly, and in his/her natural environment. Purpose Despite the increasing use and appeal of JITAIs, a major gap exists between the growing technological capabilities for delivering JITAIs and research on the development and evaluation of these interventions. Many JITAIs have been developed with minimal use of empirical evidence, theory, or accepted treatment guidelines. Here, we take an essential first step towards bridging this gap. Methods Building on health behavior theories and the extant literature on JITAIs, we clarify the scientific motivation for JITAIs, define their fundamental components, and highlight design principles related to these components. Examples of JITAIs from various domains of health behavior research are used for illustration. Conclusion As we enter a new era of technological capacity for delivering JITAIs, it is critical that researchers develop sophisticated and nuanced health behavior theories capable of guiding the construction of such interventions. Particular attention has to be given to better understanding the implications of providing timely and ecologically sound support for intervention adherence and retention. PMID:27663578

Objects and mappings: incompatible principles of display design - a critique of Marino and Mahan.

PubMed

Bennett, Kevin B

2005-01-01

Representation aiding (and similar approaches that share the general orientation) has a great deal of utility, predictive ability, and explanatory power. Marino and Mahan (2005) discuss principles that are critical to the RA approach (configurality, emergent features, and mappings) in a reasonable fashion. However, the application of these principles is far from reasonable. The authors explicitly realize the potential for interactions between nutrients: "The nutritional quality of a food product is a multidimensional concept, and higher order interactions between nutrients may exist" (p. 126). However, they made no effort to discover the nature of these interactions: "No attempt was made to identify contingent interactions between nutrients" (p. 126). Despite not knowing the nature of the interactions between nutrients, they purposely chose a highly configural display that produced numerous emergent features dependent upon these interactions: "A radial spoke display was selected because of the strong configural properties of such display formats (Bennett & Flach, 1992)" (p. 124). Finally, the authors show apparent disdain for the specific mappings among domain, agent, and display that are fundamental to the RA approach: "[O]ther configural display formats could have been used" (p. 124). It is impossible to reconcile these statements and the RA approach to display design. However, these statements make perfect sense if a perceptual object is a guiding principle in one's approach to display design. Marino and Mahan (2005) draw heavily upon the principle of a perceptual object in their design justifications, experimental predictions, and interpretations of results. As we have indicated here and elsewhere (Bennett & Flach, 1992), we believe that these two sets of organizing principles for display design (i.e., objects and mappings) are incompatible. Display design will never be an exact science; there will always be elements of art and creativity. However, the guiding

Achieving integration in mixed methods designs-principles and practices.

PubMed

Fetters, Michael D; Curry, Leslie A; Creswell, John W

2013-12-01

Mixed methods research offers powerful tools for investigating complex processes and systems in health and health care. This article describes integration principles and practices at three levels in mixed methods research and provides illustrative examples. Integration at the study design level occurs through three basic mixed method designs-exploratory sequential, explanatory sequential, and convergent-and through four advanced frameworks-multistage, intervention, case study, and participatory. Integration at the methods level occurs through four approaches. In connecting, one database links to the other through sampling. With building, one database informs the data collection approach of the other. When merging, the two databases are brought together for analysis. With embedding, data collection and analysis link at multiple points. Integration at the interpretation and reporting level occurs through narrative, data transformation, and joint display. The fit of integration describes the extent the qualitative and quantitative findings cohere. Understanding these principles and practices of integration can help health services researchers leverage the strengths of mixed methods. © Health Research and Educational Trust.

Principles for research on ethnicity and health: the Leeds Consensus Statement.

PubMed

Mir, Ghazala; Salway, Sarah; Kai, Joe; Karlsen, Saffron; Bhopal, Raj; Ellison, George Th; Sheikh, Aziz

2013-06-01

There is substantial evidence that health and health-care experiences vary along ethnic lines and the need to understand and tackle ethnic health inequalities has repeatedly been highlighted. Research into ethnicity and health raises ethical, theoretical and methodological issues and, as the volume of research in this area grows, so too do concerns regarding its scientific rigour and reporting, and its contribution to reducing inequalities. Guidance may be helpful in encouraging researchers to adopt standard practices in the design, conduct and reporting of research. However, past efforts at introducing such guidance have had limited impact on research practice, and the diversity of disciplinary perspectives on the key challenges and solutions may undermine attempts to derive and promote guiding principles. A consensus building Delphi exercise--the first of its kind in this area of research practice--was undertaken with leading academics, practitioners and policymakers from a broad range of disciplinary backgrounds to assess whether consensus on key principles could be achieved. Ten key principles for conducting research on ethnicity and health emerged, covering: the aims of research in this field; how such research should be framed and focused; key design-related considerations; and the direction of future research. Despite some areas of dispute, participants were united by a common concern that the generation and application of research evidence should contribute to better health-care experiences and health outcomes for minority ethnic people. The principles provide a strong foundation to guide future ethnicity-related research and build a broader international consensus.

A pilot study designed to acquaint medical educators with basic pedagogic principles.

PubMed

McLeod, P J; Brawer, J; Steinert, Y; Chalk, C; McLeod, A

2008-02-01

Faculty development activities in medical schools regularly target teaching behaviours but rarely address basic pedagogic principles underlying those behaviours. Although many teachers have an intuitive or tacit knowledge of basic pedagogic principles, overt knowledge of fundamental educational principles is rare. We conducted a short-term pilot study designed to transform teachers' tacit knowledge into explicit knowledge of pedagogic principles. We hypothesized that conscious awareness of these principles will positively influence their teaching effectiveness. The intervention included a workshop, provision of a workbook on pedagogic principles and free access to educational consultants. For the intervention, we chose a purposive sample of experienced teachers at our medical school. Evaluation of the impact of the intervention using questionnaires and semi-structured interviews revealed three notable findings; 1. Participants were surprised to discover the existence of an extensive body of pedagogic science underlying teaching and learning. 2. They were enthusiastic about the intervention and expressed interest in learning more about basic pedagogic principles. 3. The knowledge acquired had an immediate impact on their teaching.

Web Interface Design Principles for Adults' Self-Directed Learning

ERIC Educational Resources Information Center

Firat, Mehmet; Sakar, A. Nurhan; Kabakci Yurdakul, Isil

2016-01-01

One of the most important features which e-learning tools and environments must possess within the scope of lifelong learning is self-directed learning, which can be considered as a form of self-learning. The aim of this study was to determine, based on the views and recommendations of experts, interface design principles for the development of…

Teaching for understanding in medical classrooms using multimedia design principles.

PubMed

Issa, Nabil; Mayer, Richard E; Schuller, Mary; Wang, Edward; Shapiro, Michael B; DaRosa, Debra A

2013-04-01

In line with a recent report entitled Effective Use of Educational Technology in Medical Education from the Association of American Medical Colleges Institute for Improving Medical Education (AAMC-IME), this study examined whether revising a medical lecture based on evidence-based principles of multimedia design would lead to improved long-term transfer and retention in Year 3 medical students. A previous study yielded positive effects on an immediate retention test, but did not investigate long-term effects. In a pre-test/post-test control design, a cohort of 37 Year 3 medical students at a private, midwestern medical school received a bullet point-based PowerPoint™ lecture on shock developed by the instructor as part of their core curriculum (the traditional condition group). Another cohort of 43 similar medical students received a lecture covering identical content using slides redesigned according to Mayer's evidence-based principles of multimedia design (the modified condition group). Findings showed that the modified condition group significantly outscored the traditional condition group on delayed tests of transfer given 1 week (d = 0.83) and 4 weeks (d = 1.17) after instruction, and on delayed tests of retention given 1 week (d = 0.83) and 4 weeks (d = 0.79) after instruction. The modified condition group also significantly outperformed the traditional condition group on immediate tests of retention (d = 1.49) and transfer (d = 0.76). This study provides the first evidence that applying multimedia design principles to an actual medical lecture has significant effects on measures of learner understanding (i.e. long-term transfer and long-term retention). This work reinforces the need to apply the science of learning and instruction in medical education. © Blackwell Publishing Ltd 2013.

Teacher's Guide to SERAPHIM Software II. Chemical Principles.

ERIC Educational Resources Information Center

Bogner, Donna J.

Designed to assist chemistry teachers in selecting appropriate software programs, this publication is the second in a series of six teacher's guides from Project SERAPHIM, a program sponsored by the National Science Foundation. This guide is keyed to the chapters of the text "Chemical Principles." Program suggestions are arranged in the…

Principles for valid histopathologic scoring in research

PubMed Central

Gibson-Corley, Katherine N.; Olivier, Alicia K.; Meyerholz, David K.

2013-01-01

Histopathologic scoring is a tool by which semi-quantitative data can be obtained from tissues. Initially, a thorough understanding of the experimental design, study objectives and methods are required to allow the pathologist to appropriately examine tissues and develop lesion scoring approaches. Many principles go into the development of a scoring system such as tissue examination, lesion identification, scoring definitions and consistency in interpretation. Masking (a.k.a. “blinding”) of the pathologist to experimental groups is often necessary to constrain bias and multiple mechanisms are available. Development of a tissue scoring system requires appreciation of the attributes and limitations of the data (e.g. nominal, ordinal, interval and ratio data) to be evaluated. Incidence, ordinal and rank methods of tissue scoring are demonstrated along with key principles for statistical analyses and reporting. Validation of a scoring system occurs through two principal measures: 1) validation of repeatability and 2) validation of tissue pathobiology. Understanding key principles of tissue scoring can help in the development and/or optimization of scoring systems so as to consistently yield meaningful and valid scoring data. PMID:23558974

Babinet principle applied to the design of metasurfaces and metamaterials.

PubMed

Falcone, F; Lopetegi, T; Laso, M A G; Baena, J D; Bonache, J; Beruete, M; Marqués, R; Martín, F; Sorolla, M

2004-11-05

The electromagnetic theory of diffraction and the Babinet principle are applied to the design of artificial metasurfaces and metamaterials. A new particle, the complementary split rings resonator, is proposed for the design of metasurfaces with high frequency selectivity and planar metamaterials with a negative dielectric permittivity. Applications in the fields of frequency selective surfaces and polarizers, as well as in microwave antennas and filter design, can be envisaged. The tunability of all these devices by an applied dc voltage is also achievable if these particles are etched on the appropriate substrate.

Applying design principles to fusion reactor configurations for propulsion in space

NASA Technical Reports Server (NTRS)

Carpenter, Scott A.; Deveny, Marc E.; Schulze, Norman R.

1993-01-01

The application of fusion power to space propulsion requires rethinking the engineering-design solution to controlled-fusion energy. Whereas the unit cost of electricity (COE) drives the engineering-design solution for utility-based fusion reactor configurations; initial mass to low earth orbit (IMLEO), specific jet power (kW(thrust)/kg(engine)), and reusability drive the engineering-design solution for successful application of fusion power to space propulsion. We applied three design principles (DP's) to adapt and optimize three candidate-terrestrial-fusion-reactor configurations for propulsion in space. The three design principles are: provide maximum direct access to space for waste radiation, operate components as passive radiators to minimize cooling-system mass, and optimize the plasma fuel, fuel mix, and temperature for best specific jet power. The three candidate terrestrial fusion reactor configurations are: the thermal barrier tandem mirror (TBTM), field reversed mirror (FRM), and levitated dipole field (LDF). The resulting three candidate space fusion propulsion systems have their IMLEO minimized and their specific jet power and reusability maximized. We performed a preliminary rating of these configurations and concluded that the leading engineering-design solution to space fusion propulsion is a modified TBTM that we call the Mirror Fusion Propulsion System (MFPS).

Human experience and product usability: principles to assist the design of user-product interactions.

PubMed

Chamorro-Koc, Marianella; Popovic, Vesna; Emmison, Michael

2009-07-01

This paper introduces research that investigates how human experience influences people's understandings of product usability. It describes an experiment that employs visual representation of concepts to elicit participants' ideas of a product's use. Results from the experiment lead to the identification of relationships between human experience, knowledge, and context-of-use--relationships that influence designers' and users' concepts of product usability. These relationships are translated into design principles that inform the design activity with respect to the aspects of experience that trigger people's understanding of a product's use. A design tool (ECEDT) is devised to aid designers in the application of these principles. This tool is then trialled in the context of a design task in order to verify applicability of the findings.

Semiconductor-inspired design principles for superconducting quantum computing.

PubMed

Shim, Yun-Pil; Tahan, Charles

2016-03-17

Superconducting circuits offer tremendous design flexibility in the quantum regime culminating most recently in the demonstration of few qubit systems supposedly approaching the threshold for fault-tolerant quantum information processing. Competition in the solid-state comes from semiconductor qubits, where nature has bestowed some very useful properties which can be utilized for spin qubit-based quantum computing. Here we begin to explore how selective design principles deduced from spin-based systems could be used to advance superconducting qubit science. We take an initial step along this path proposing an encoded qubit approach realizable with state-of-the-art tunable Josephson junction qubits. Our results show that this design philosophy holds promise, enables microwave-free control, and offers a pathway to future qubit designs with new capabilities such as with higher fidelity or, perhaps, operation at higher temperature. The approach is also especially suited to qubits on the basis of variable super-semi junctions.

Key Principles of Superfund Remedy Selection

EPA Pesticide Factsheets

Guidance on the primary considerations of remedy selection which are universally applicable at Superfund sites. Key guidance here include: Rules of Thumb for Superfund Remedy Selection and Role of the Baseline Risk Assessment.

10 CFR 433.6 - Sustainable principles for siting, design and construction. [Reserved

Code of Federal Regulations, 2011 CFR

2011-01-01

... 10 Energy 3 2011-01-01 2011-01-01 false Sustainable principles for siting, design and construction. [Reserved] 433.6 Section 433.6 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION ENERGY EFFICIENCY STANDARDS FOR THE DESIGN AND CONSTRUCTION OF NEW FEDERAL COMMERCIAL AND MULTI-FAMILY HIGH-RISE RESIDENTIAL...

10 CFR 433.6 - Sustainable principles for siting, design and construction. [Reserved

Code of Federal Regulations, 2010 CFR

2010-01-01

... 10 Energy 3 2010-01-01 2010-01-01 false Sustainable principles for siting, design and construction. [Reserved] 433.6 Section 433.6 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION ENERGY EFFICIENCY STANDARDS FOR THE DESIGN AND CONSTRUCTION OF NEW FEDERAL COMMERCIAL AND MULTI-FAMILY HIGH-RISE RESIDENTIAL...

Applying core principles to the design and evaluation of the 'Take Charge. Take the Test' campaign: what worked and lessons learned.

PubMed

Fraze, J L; Uhrig, J D; Davis, K C; Taylor, M K; Lee, N R; Spoeth, S; Robinson, A; Smith, K; Johnston, J; McElroy, L

2009-09-01

To describe the application of seven core principles to the design and evaluation of a human immunodeficiency virus (HIV) testing social marketing campaign as a case study example. The Centers for Disease Control and Prevention (CDC) used a structured social marketing approach, informed by the Ecological Model, the Theory of Planned Behaviour and the Health Belief Model, to develop and evaluate a two-city campaign with print, radio and outdoor advertising; HIV telephone hotlines; an HIV website; community partnerships; and events to promote information seeking and HIV testing. The CDC applied seven core principles to design and evaluate the campaign, including formative research, the use of behavioural theories, audience segmentation, message design and pretesting, channel selection, process evaluation and outcome evaluation. Over 200 partners in both cities contributed significantly to campaign efforts. Key informant interviews indicated that, due to increased coordination, city infrastructures for HIV testing improved. More than 9600 individuals attended campaign events in both cities, with 1492 rapid HIV tests administered and 14 newly-identified HIV individuals. Overall, event attendees responded positively to campaign materials and events, and free HIV testing opportunities. The campaign significantly increased information-seeking behaviours in the form of hotline calls and web searches. Audience reaction and receptivity to the final campaign materials was very high. Exposure to campaign messages was associated with increases in key knowledge items, intentions to get tested, and peer-to-peer communication. The seven core principles, including formative research, behavioural theories and extensive partnerships, acted synergistically to help a campaign reach its target audience with compelling, relevant messages and motivate them to seek information and get an HIV test. Rapid testing removes many barriers by providing a testing process that can be accessed and

Extending the generality of leaf economic design principles in the cycads, an ancient lineage.

PubMed

Zhang, Yong-Jiang; Cao, Kun-Fang; Sack, Lawren; Li, Nan; Wei, Xue-Mei; Goldstein, Guillermo

2015-04-01

Cycads are the most ancient lineage of living seed plants, but the design of their leaves has received little study. We tested whether cycad leaves are governed by the same fundamental design principles previously established for ferns, conifers and angiosperms, and characterized the uniqueness of this relict lineage in foliar trait relationships. Leaf structure, photosynthesis, hydraulics and nutrient composition were studied in 33 cycad species from nine genera and three families growing in two botanical gardens. Cycads varied greatly in leaf structure and physiology. Similarly to other lineages, light-saturated photosynthetic rate per mass (Am ) was related negatively to leaf mass per area and positively to foliar concentrations of chlorophyll, nitrogen (N), phosphorus and iron, but unlike angiosperms, leaf photosynthetic rate was not associated with leaf hydraulic conductance. Cycads had lower photosynthetic N use efficiency and higher photosynthetic performance relative to hydraulic capacity compared with other lineages. These findings extend the relationships shown for foliar traits in angiosperms to the cycads. This functional convergence supports the modern synthetic understanding of leaf design, with common constraints operating across lineages, even as they highlight exceptional aspects of the biology of this key relict lineage. © 2015 The Authors. New Phytologist © 2015 New Phytologist Trust.

Conceptual design and proof-of-principle testing of the real-time multispectral imaging system MANTIS

NASA Astrophysics Data System (ADS)

Vijvers, W. A. J.; Mumgaard, R. T.; Andrebe, Y.; Classen, I. G. J.; Duval, B. P.; Lipschultz, B.

2017-12-01

The Multispectral Advanced Narrowband Tokamak Imaging System (MANTIS) is proposed to resolve the steep temperature and density gradients in the scrape-off layer of tokamaks in real-time. The initial design is to deliver two-dimensional distributions of key plasma parameters of the TCV tokamak to a real-time control system in order to enable novel control strategies, while providing new insights into power exhaust physics in the full offline analysis. This paper presents the conceptual system design, the mechanical and optical design of a prototype that was built to assess the optical performance, and the results of the first proof-of-principle tests of the prototype. These demonstrate a central resolving power of 50-46 line pairs per millimeter (CTF50) in the first four channels. For the additional channels, the sharpness is a factor two worse for the odd channels (likely affected by sub-optimal alignment), while the even channels continue the trend observed for the first four channels of 3% degradation per channel. This is explained by the self-cancellation of off-axis aberrations, which is an attractive property of the chosen optical design. The results show that at least a 10-channel real-time multispectral imaging system is feasible.

Design of Learning Objects for Concept Learning: Effects of Multimedia Learning Principles and an Instructional Approach

ERIC Educational Resources Information Center

Chiu, Thomas K. F.; Churchill, Daniel

2016-01-01

Literature suggests using multimedia learning principles in the design of instructional material. However, these principles may not be sufficient for the design of learning objects for concept learning in mathematics. This paper reports on an experimental study that investigated the effects of an instructional approach, which includes two teaching…

10 CFR 435.6 - Sustainable principles for siting, design and construction. [Reserved

Code of Federal Regulations, 2011 CFR

2011-01-01

... FOR NEW FEDERAL LOW-RISE RESIDENTIAL BUILDINGS Mandatory Energy Efficiency Standards for Federal Low-Rise Residential Buildings. § 435.6 Sustainable principles for siting, design and construction...

10 CFR 435.6 - Sustainable principles for siting, design and construction. [Reserved

Code of Federal Regulations, 2010 CFR

2010-01-01

... FOR NEW FEDERAL LOW-RISE RESIDENTIAL BUILDINGS Mandatory Energy Efficiency Standards for Federal Low-Rise Residential Buildings. § 435.6 Sustainable principles for siting, design and construction...

Maximum Principle in the Optimal Design of Plates with Stratified Thickness

DOE Office of Scientific and Technical Information (OSTI.GOV)

Roubicek, Tomas

2005-03-15

An optimal design problem for a plate governed by a linear, elliptic equation with bounded thickness varying only in a single prescribed direction and with unilateral isoperimetrical-type constraints is considered. Using Murat-Tartar's homogenization theory for stratified plates and Young-measure relaxation theory, smoothness of the extended cost and constraint functionals is proved, and then the maximum principle necessary for an optimal relaxed design is derived.

Using articulation and inscription as catalysts for reflection: Design principles for reflective inquiry

NASA Astrophysics Data System (ADS)

Loh, Ben Tun-Bin

2003-07-01

The demand for students to engage in complex student-driven and information-rich inquiry investigations poses challenges to existing learning environments. Students are not familiar with this style of work, and lack the skills, tools, and expectations it demands, often forging blindly forward in the investigation. If students are to be successful, they need to learn to be reflective inquirers, periodically stepping back from an investigation to evaluate their work. The fundamental goal of my dissertation is to understand how to design learning environments to promote and support reflective inquiry. I have three basic research questions: how to define this mode of work, how to help students learn it, and understanding how it facilitates reflection when enacted in a classroom. I take an exploratory approach in which, through iterative cycles of design, development, and reflection, I develop principles of design for reflective inquiry, instantiate those principles in the design of a software environment, and test that software in the context of classroom work. My work contributes to the understanding of reflective inquiry in three ways: First, I define a task model that describes the kinds of operations (cognitive tasks) that students should engage in as reflective inquirers. These operations are defined in terms of two basic tasks: articulation and inscription, which serve as catalysts for externalizing student thinking as objects of and triggers for reflection. Second, I instantiate the task model in the design of software tools (the Progress Portfolio). And, through proof of concept pilot studies, I examine how the task model and tools helped students with their investigative classroom work. Finally, I take a step back from these implementations and articulate general design principles for reflective inquiry with the goal of informing the design of other reflective inquiry learning environments. There are three design principles: (1) Provide a designated work space

Seaworthy Quantum Key Distribution Design and Validation (SEAKEY)

DTIC Science & Technology

2015-11-12

polarization control and the CV state and the LO state are separated at a polarizing beam splitter . The CV state is delayed relative to the LO state, and... splitter or loss imperfections. We have identified a number of risks associated with implementing this design . The two most critical risks are: • The...Contractor Address: 10 Moulton Street, Cambridge, MA 02138 Title of the Project: Seaworthy Quantum Key Distribution Design and Validation (SEAKEY

Active magnetic radiation shielding system analysis and key technologies.

PubMed

Washburn, S A; Blattnig, S R; Singleterry, R C; Westover, S C

2015-01-01

Many active magnetic shielding designs have been proposed in order to reduce the radiation exposure received by astronauts on long duration, deep space missions. While these designs are promising, they pose significant engineering challenges. This work presents a survey of the major systems required for such unconfined magnetic field design, allowing the identification of key technologies for future development. Basic mass calculations are developed for each system and are used to determine the resulting galactic cosmic radiation exposure for a generic solenoid design, using a range of magnetic field strength and thickness values, allowing some of the basic characteristics of such a design to be observed. This study focuses on a solenoid shaped, active magnetic shield design; however, many of the principles discussed are applicable regardless of the exact design configuration, particularly the key technologies cited. Copyright © 2015 The Committee on Space Research (COSPAR). All rights reserved.

Novel Principles and Techniques to Create a Natural Design in Female Hairline Correction Surgery.

PubMed

Park, Jae Hyun

2015-12-01

Female hairline correction surgery is becoming increasingly popular. However, no guidelines or methods of female hairline design have been introduced to date. The purpose of this study was to create an initial framework based on the novel principles of female hairline design and then use artistic ability and experience to fine tune this framework. An understanding of the concept of 5 areas (frontal area, frontotemporal recess area, temporal peak, infratemple area, and sideburns) and 5 points (C, A, B, T, and S) is required for female hairline correction surgery (the 5A5P principle). The general concepts of female hairline correction surgery and natural design methods are, herein, explained with a focus on the correlations between these 5 areas and 5 points. A natural and aesthetic female hairline can be created with application of the above-mentioned concepts. The 5A5P principle of forming the female hairline is very useful in female hairline correction surgery.

Novel Principles and Techniques to Create a Natural Design in Female Hairline Correction Surgery

PubMed Central

2015-01-01

Abstract Background: Female hairline correction surgery is becoming increasingly popular. However, no guidelines or methods of female hairline design have been introduced to date. Methods: The purpose of this study was to create an initial framework based on the novel principles of female hairline design and then use artistic ability and experience to fine tune this framework. An understanding of the concept of 5 areas (frontal area, frontotemporal recess area, temporal peak, infratemple area, and sideburns) and 5 points (C, A, B, T, and S) is required for female hairline correction surgery (the 5A5P principle). The general concepts of female hairline correction surgery and natural design methods are, herein, explained with a focus on the correlations between these 5 areas and 5 points. Results: A natural and aesthetic female hairline can be created with application of the above-mentioned concepts. Conclusion: The 5A5P principle of forming the female hairline is very useful in female hairline correction surgery. PMID:26894014

Serious game design principles: The impact of game design on learning outcomes

NASA Astrophysics Data System (ADS)

Martin, Michael W.

This dissertation examines the research question "How do video game design principles affect learning outcomes in serious games?" This research first develops a theoretical foundation concerning the meaning of the terms "game" and "serious game". This conceptual clarification is broken down into analytic propositions, which state that games have participants, rules, goals and challenges, and synthetic propositions, which state that the games should be intrinsically compelling, provide meaningful choices, and be self encapsulated. Based on these synthetic propositions, three hypotheses were developed. The hypotheses are that games with an enhanced aesthetic presentation, more meaningful choices, or provide player competition will elicit higher learning outcomes than identical games without these factors. These hypotheses were tested via a quantitative experiment involving 172 undergraduate students in the Old Dominion University Chemistry Department. The students were asked to play a chemistry-oriented serious game entitled Element Solitaire©, which was created by the research author. The students were randomly given different treatments of the Element Solitaire© game to play, and the difference between their learning outcomes were compared. The experimental results demonstrated that the aesthetic presentation of a game can have a significant impact upon the learning outcome. The experiment was not able to discern significant effects from the choice or competition conditions, but further examination of the experimental data did reveal some insight into these aspects of serious game design. Choices need to provide the player with options that have a sufficient value that they will be considered and the application of competition within games needs to be judiciously implemented to promote a positive affect for all players. The results of the theoretical foundations and empirical evidence were then combined with additional theoretical research to develop a set of

Proof of principle for epitope-focused vaccine design

PubMed Central

Correia, Bruno E.; Bates, John T.; Loomis, Rebecca J.; Baneyx, Gretchen; Carrico, Christopher; Jardine, Joseph G.; Rupert, Peter; Correnti, Colin; Kalyuzhniy, Oleksandr; Vittal, Vinayak; Connell, Mary J.; Stevens, Eric; Schroeter, Alexandria; Chen, Man; MacPherson, Skye; Serra, Andreia M.; Adachi, Yumiko; Holmes, Margaret A.; Li, Yuxing; Klevit, Rachel E.; Graham, Barney S.; Wyatt, Richard T.; Baker, David; Strong, Roland K.; Crowe, James E.; Johnson, Philip R.; Schief, William R.

2014-01-01

Summary Vaccines prevent infectious disease largely by inducing protective neutralizing antibodies against vulnerable epitopes. Multiple major pathogens have resisted traditional vaccine development, although vulnerable epitopes targeted by neutralizing antibodies have been identified for several such cases. Hence, new vaccine design methods to induce epitope-specific neutralizing antibodies are needed. Here we show, with a neutralization epitope from respiratory syncytial virus (RSV), that computational protein design can generate small, thermally and conformationally stable protein scaffolds that accurately mimic the viral epitope structure and induce potent neutralizing antibodies. These scaffolds represent promising leads for research and development of a human RSV vaccine needed to protect infants, young children and the elderly. More generally, the results provide proof of principle for epitope-focused and scaffold-based vaccine design, and encourage the evaluation and further development of these strategies for a variety of other vaccine targets including antigenically highly variable pathogens such as HIV and influenza. PMID:24499818

Proof of principle for epitope-focused vaccine design

NASA Astrophysics Data System (ADS)

Correia, Bruno E.; Bates, John T.; Loomis, Rebecca J.; Baneyx, Gretchen; Carrico, Chris; Jardine, Joseph G.; Rupert, Peter; Correnti, Colin; Kalyuzhniy, Oleksandr; Vittal, Vinayak; Connell, Mary J.; Stevens, Eric; Schroeter, Alexandria; Chen, Man; MacPherson, Skye; Serra, Andreia M.; Adachi, Yumiko; Holmes, Margaret A.; Li, Yuxing; Klevit, Rachel E.; Graham, Barney S.; Wyatt, Richard T.; Baker, David; Strong, Roland K.; Crowe, James E.; Johnson, Philip R.; Schief, William R.

2014-03-01

Vaccines prevent infectious disease largely by inducing protective neutralizing antibodies against vulnerable epitopes. Several major pathogens have resisted traditional vaccine development, although vulnerable epitopes targeted by neutralizing antibodies have been identified for several such cases. Hence, new vaccine design methods to induce epitope-specific neutralizing antibodies are needed. Here we show, with a neutralization epitope from respiratory syncytial virus, that computational protein design can generate small, thermally and conformationally stable protein scaffolds that accurately mimic the viral epitope structure and induce potent neutralizing antibodies. These scaffolds represent promising leads for the research and development of a human respiratory syncytial virus vaccine needed to protect infants, young children and the elderly. More generally, the results provide proof of principle for epitope-focused and scaffold-based vaccine design, and encourage the evaluation and further development of these strategies for a variety of other vaccine targets, including antigenically highly variable pathogens such as human immunodeficiency virus and influenza.

Principles of Biomimetic Vascular Network Design Applied to a Tissue-Engineered Liver Scaffold

PubMed Central

Hoganson, David M.; Pryor, Howard I.; Spool, Ira D.; Burns, Owen H.; Gilmore, J. Randall

2010-01-01

Branched vascular networks are a central component of scaffold architecture for solid organ tissue engineering. In this work, seven biomimetic principles were established as the major guiding technical design considerations of a branched vascular network for a tissue-engineered scaffold. These biomimetic design principles were applied to a branched radial architecture to develop a liver-specific vascular network. Iterative design changes and computational fluid dynamic analysis were used to optimize the network before mold manufacturing. The vascular network mold was created using a new mold technique that achieves a 1:1 aspect ratio for all channels. In vitro blood flow testing confirmed the physiologic hemodynamics of the network as predicted by computational fluid dynamic analysis. These results indicate that this biomimetic liver vascular network design will provide a foundation for developing complex vascular networks for solid organ tissue engineering that achieve physiologic blood flow. PMID:20001254

Principles of biomimetic vascular network design applied to a tissue-engineered liver scaffold.

PubMed

Hoganson, David M; Pryor, Howard I; Spool, Ira D; Burns, Owen H; Gilmore, J Randall; Vacanti, Joseph P

2010-05-01

Branched vascular networks are a central component of scaffold architecture for solid organ tissue engineering. In this work, seven biomimetic principles were established as the major guiding technical design considerations of a branched vascular network for a tissue-engineered scaffold. These biomimetic design principles were applied to a branched radial architecture to develop a liver-specific vascular network. Iterative design changes and computational fluid dynamic analysis were used to optimize the network before mold manufacturing. The vascular network mold was created using a new mold technique that achieves a 1:1 aspect ratio for all channels. In vitro blood flow testing confirmed the physiologic hemodynamics of the network as predicted by computational fluid dynamic analysis. These results indicate that this biomimetic liver vascular network design will provide a foundation for developing complex vascular networks for solid organ tissue engineering that achieve physiologic blood flow.

Key design features of a new smokefree law to help achieve the Smokefree Aotearoa.

PubMed

Delany, Louise; Thomson, George; Wilson, Nick; Edwards, Richard

2016-08-05

To design new tobacco control legislation to achieve the New Zealand Government's 2025 smokefree goal. An original analysis of the legislative options for New Zealand tobacco control. 'Business as usual' is most unlikely to achieve smoking prevalence that is less than 5% by 2025. Key components of a new Act would ideally include plans and targets with teeth, a focus on the industry, a focus on the product, reduction of supply, and a whole-of-society approach to promote consistency in policy implementation through: i) a public duty on government agencies to act consistently with smokefree law; ii) a general duty on those associated with the tobacco/nicotine industry in relation to tobacco control objectives; and iii) a principle requiring international treaties to be interpreted consistently with tobacco control objectives. Strategies such as those identified in this Viewpoint should be explored further as part of urgently needed planning to achieve the New Zealand Government's goal for Smokefree Aotearoa by 2025.

Biofiltration: Fundamentals, design and operations principles and applications

DOE Office of Scientific and Technical Information (OSTI.GOV)

Swanson, W.J.; Loehr, R.C.

1997-06-01

Biofiltration is a biological air pollution control technology for volatile organic compounds (VOCs). This paper summarizes the fundamentals, design and operation, and application of the process. Biofiltration has been demonstrated to be an effective technology for VOCs from many industries. Large and full-scale systems are in use in Europe and the US. With proper design and operation, VOC removal efficiencies of 95--99% have been achieved. Important parameters for design and performance are empty-bed contact time, gas surface loading, mass loading, elimination capacity, and removal efficiency. Key design and operation factors include chemical and media properties, moisture, pH, temperature, nutrient availability,more » gas pretreatment, and variations in loading.« less

Principles of Good School Building Design. School Buildings Planning, Design, and Construction Series No. 3.

ERIC Educational Resources Information Center

Odell, John H.

A school construction guide offers key personnel in school development projects information on the complex task of master planning and construction of schools in Australia. This chapter of the guide provides advice on school building design issues, such as the fundamentals of good design and designs that accommodate change, issues affecting…

The Effect of Content Representation Design Principles on Users' Intuitive Beliefs and Use of E-Learning Systems

ERIC Educational Resources Information Center

Al-Samarraie, Hosam; Selim, Hassan; Zaqout, Fahed

2016-01-01

A model is proposed to assess the effect of different content representation design principles on learners' intuitive beliefs about using e-learning. We hypothesized that the impact of the representation of course contents is mediated by the design principles of alignment, quantity, clarity, simplicity, and affordance, which influence the…

Development of design principles for automated systems in transport control.

PubMed

Balfe, Nora; Wilson, John R; Sharples, Sarah; Clarke, Theresa

2012-01-01

This article reports the results of a qualitative study investigating attitudes towards and opinions of an advanced automation system currently used in UK rail signalling. In-depth interviews were held with 10 users, key issues associated with automation were identified and the automation's impact on the signalling task investigated. The interview data highlighted the importance of the signallers' understanding of the automation and their (in)ability to predict its outputs. The interviews also covered the methods used by signallers to interact with and control the automation, and the perceived effects on their workload. The results indicate that despite a generally low level of understanding and ability to predict the actions of the automation system, signallers have developed largely successful coping mechanisms that enable them to use the technology effectively. These findings, along with parallel work identifying desirable attributes of automation from the literature in the area, were used to develop 12 principles of automation which can be used to help design new systems which better facilitate cooperative working. The work reported in this article was completed with the active involvement of operational rail staff who regularly use automated systems in rail signalling. The outcomes are currently being used to inform decisions on the extent and type of automation and user interfaces in future generations of rail control systems.

Virtual Worlds; Real Learning: Design Principles for Engaging Immersive Environments

NASA Technical Reports Server (NTRS)

Wu (u. Sjarpm)

2012-01-01

The EMDT master's program at Full Sail University embarked on a small project to use a virtual environment to teach graduate students. The property used for this project has evolved our several iterations and has yielded some basic design principles and pedagogy for virtual spaces. As a result, students are emerging from the program with a better grasp of future possibilities.

Supracolloidal fullerene-like cages: design principles and formation mechanisms.

PubMed

Li, Zhan-Wei; Zhu, You-Liang; Lu, Zhong-Yuan; Sun, Zhao-Yan

2016-11-30

How to create novel desired structures by rational design of building blocks represents a significant challenge in materials science. Here we report a conceptually new design principle for creating supracolloidal fullerene-like cages through the self-assembly of soft patchy particles interacting via directional nonbonded interactions by mimicking non-planar sp 2 hybridized carbon atoms in C 60 . Our numerical investigations demonstrate that the rational design of patch configuration, size, and interaction can drive soft three-patch particles to reversibly self-assemble into a vast collection of supracolloidal fullerene-like cages. We further elucidate the formation mechanisms of supracolloidal fullerene-like cages by analyzing the structural characteristics and the formation process. Our results provide conceptual and practical guidance towards the experimental realization of supracolloidal fullerene-like cages, as well as a new perspective on understanding the fullerene formation mechanisms.

Understanding and responding when things go wrong: key principles for primary care educators.

PubMed

McNab, Duncan; Bowie, Paul; Ross, Alastair; Morrison, Jill

2016-07-01

Learning from events with unwanted outcomes is an important part of workplace based education and providing evidence for medical appraisal and revalidation. It has been suggested that adopting a 'systems approach' could enhance learning and effective change. We believe the following key principles should be understood by all healthcare staff, especially those with a role in developing and delivering educational content for safety and improvement in primary care. When things go wrong, professional accountability involves accepting there has been a problem, apologising if necessary and committing to learn and change. This is easier in a 'Just Culture' where wilful disregard of safe practice is not tolerated but where decisions commensurate with training and experience do not result in blame and punishment. People usually attempt to achieve successful outcomes, but when things go wrong the contribution of hindsight and attribution bias as well as a lack of understanding of conditions and available information (local rationality) can lead to inappropriately blame 'human error'. System complexity makes reduction into component parts difficult; thus attempting to 'find-and-fix' malfunctioning components may not always be a valid approach. Finally, performance variability by staff is often needed to meet demands or cope with resource constraints. We believe understanding these core principles is a necessary precursor to adopting a 'systems approach' that can increase learning and reduce the damaging effects on morale when 'human error' is blamed. This may result in 'human error' becoming the starting point of an investigation and not the endpoint.

Using Gestalt Theory to Teach Document Design and Graphics.

ERIC Educational Resources Information Center

Moore, Patrick; Fitz, Chad

1993-01-01

Presents a brief overview of Gestalt theory. Discusses and illustrates six key principles of Gestalt psychology as they apply to document design and graphics. Presents exercise that students may use to improve their understanding of the principles and develop their document design skills. Distinguishes between Gestalt theory and rhetoric. (RS)

Effective Home Visiting Training: Key Principles and Findings to Guide Training Developers and Evaluators.

PubMed

Schultz, David; Jones, Shelby S; Pinder, Wendy M; Wiprovnick, Alicia E; Groth, Elisabeth C; Shanty, Lisa M; Duggan, Anne

2018-06-23

Purpose Home visiting programs have produced inconsistent outcomes. One challenge for the field is the design and implementation of effective training to support home visiting staff. In part due to a lack of formal training, most home visitors need to develop the majority of their skills on the job. Home visitors typically receive training in their agency's specific model (e.g., HFA, NFP) and, if applicable, curriculum. Increasingly, states and other home visiting systems are developing and/or coordinating more extensive training and support systems beyond model-specific and curricula trainings. To help guide these training efforts and future evaluations of them, this paper reviews research on effective training, particularly principles of training transfer and adult learning. Description Our review summarizes several meta-analyses, reviews, and more recent publications on training transfer and adult learning principles. Assessment Effective training involves not only the introduction and modeling of concepts and skills but also the practice of, evaluation of, and reflection upon these skills. Further, ongoing encouragement of, reward for, and reflection upon use of these skills, particularly by a home visitor's supervisor, are critical for the home visitor's continued use of these skills with families. Conclusion Application of principles of adult learning and training transfer to home visiting training will likely lead to greater transfer of skills from the training environment to work with families. The involvement of both home visitors and their supervisors in training is likely important for this transfer to occur.

Using Principles of Learning to Inform Language Therapy Design for Children with Specific Language Impairment

ERIC Educational Resources Information Center

Alt, Mary; Meyers, Christina; Ancharski, Alexandra

2012-01-01

Background: Language treatment for children with specific language impairment (SLI) often takes months to achieve moderate results. Interventions often do not incorporate the principles that are known to affect learning in unimpaired learners. Aims: To outline some key findings about learning in typical populations and to suggest a model of how…

Proof-of-principle experimental realization of a qubit-like qudit-based quantum key distribution scheme

NASA Astrophysics Data System (ADS)

Wang, Shuang; Yin, Zhen-Qiang; Chau, H. F.; Chen, Wei; Wang, Chao; Guo, Guang-Can; Han, Zheng-Fu

2018-04-01

In comparison to qubit-based protocols, qudit-based quantum key distribution ones generally allow two cooperative parties to share unconditionally secure keys under a higher channel noise. However, it is very hard to prepare and measure the required quantum states in qudit-based protocols in general. One exception is the recently proposed highly error tolerant qudit-based protocol known as the Chau15 (Chau 2015 Phys. Rev. A 92 062324). Remarkably, the state preparation and measurement in this protocol can be done relatively easily since the required states are phase encoded almost like the diagonal basis states of a qubit. Here we report the first proof-of-principle demonstration of the Chau15 protocol. One highlight of our experiment is that its post-processing is based on practical one-way manner, while the original proposal in Chau (2015 Phys. Rev. A 92 062324) relies on complicated two-way post-processing, which is a great challenge in experiment. In addition, by manipulating time-bin qudit and measurement with a variable delay interferometer, our realization is extensible to qudit with high-dimensionality and confirms the experimental feasibility of the Chau15 protocol.

Design Principles of Regulatory Networks: Searching for the Molecular Algorithms of the Cell

PubMed Central

Lim, Wendell A.; Lee, Connie M.; Tang, Chao

2013-01-01

A challenge in biology is to understand how complex molecular networks in the cell execute sophisticated regulatory functions. Here we explore the idea that there are common and general principles that link network structures to biological functions, principles that constrain the design solutions that evolution can converge upon for accomplishing a given cellular task. We describe approaches for classifying networks based on abstract architectures and functions, rather than on the specific molecular components of the networks. For any common regulatory task, can we define the space of all possible molecular solutions? Such inverse approaches might ultimately allow the assembly of a design table of core molecular algorithms that could serve as a guide for building synthetic networks and modulating disease networks. PMID:23352241

Design principles of a microtubule polymerase

PubMed Central

Geyer, Elisabeth A; Miller, Matthew P; Brautigam, Chad A; Biggins, Sue

2018-01-01

Stu2/XMAP215 microtubule polymerases use multiple tubulin-binding TOG domains and a lattice-binding basic region to processively promote faster elongation. How the domain composition and organization of these proteins dictate polymerase activity, end localization, and processivity is unknown. We show that polymerase activity does not require different kinds of TOGs, nor are there strict requirements for how the TOGs are linked. We identify an unexpected antagonism between the tubulin-binding TOGs and the lattice-binding basic region: lattice binding by the basic region is weak when at least two TOGs engage tubulins, strong when TOGs are empty. End-localization of Stu2 requires unpolymerized tubulin, at least two TOGs, and polymerase competence. We propose a ‘ratcheting’ model for processivity: transfer of tubulin from TOGs to the lattice activates the basic region, retaining the polymerase at the end for subsequent rounds of tubulin binding and incorporation. These results clarify design principles of the polymerase. PMID:29897335

Spatial design principles for sustainable hydropower development in river basins

DOE PAGES

Jager, Henriëtte I.; Efroymson, Rebecca A.; Opperman, Jeff J.; ...

2015-02-27

How can dams be arranged within a river basin such that they benefit society? Recent interest in this question has grown in response to the worldwide trend toward developing hydropower as a source of renewable energy in Asia and South America, and the movement toward removing unnecessary dams in the US. Environmental and energy sustainability are important practical concerns, and yet river development has rarely been planned with the goal of providing society with a portfolio of ecosystem services into the future. We organized a review and synthesis of the growing research in sustainable river basin design around four spatialmore » decisions: Is it better to build fewer mainstem dams or more tributary dams? Should dams be clustered or distributed among distant subbasins? Where should dams be placed along a river? At what spatial scale should decisions be made? We came up with the following design principles for increasing ecological sustainability: (i) concentrate dams within a subset of tributary watersheds and avoid downstream mainstems of rivers, (ii) disperse freshwater reserves among the remaining tributary catchments, (iii) ensure that habitat provided between dams will support reproduction and retain offspring, and (iv) formulate spatial decision problems at the scale of large river basins. Based on our review, we discuss trade-offs between hydropower and ecological objectives when planning river basin development. We hope that future testing and refinement of principles extracted from our review will define a path toward sustainable river basin design.« less

High-throughput spectrometer designs in a compact form-factor: principles and applications

NASA Astrophysics Data System (ADS)

Norton, S. M.

2013-05-01

Many compact, portable Raman spectrometers have entered the market in the past few years with applications in narcotics and hazardous material identification, as well as verification applications in pharmaceuticals and security screening. Often, the required compact form-factor has forced designers to sacrifice throughput and sensitivity for portability and low-cost. We will show that a volume phase holographic (VPH)-based spectrometer design can achieve superior throughput and thus sensitivity over conventional Czerny-Turner reflective designs. We will look in depth at the factors influencing throughput and sensitivity and illustrate specific VPH-based spectrometer examples that highlight these design principles.

Principles of thermoacoustic energy harvesting

NASA Astrophysics Data System (ADS)

Avent, A. W.; Bowen, C. R.

2015-11-01

Thermoacoustics exploit a temperature gradient to produce powerful acoustic pressure waves. The technology has a key role to play in energy harvesting systems. A time-line in the development of thermoacoustics is presented from its earliest recorded example in glass blowing through to the development of the Sondhauss and Rijke tubes to Stirling engines and pulse-tube cryo-cooling. The review sets the current literature in context, identifies key publications and promising areas of research. The fundamental principles of thermoacoustic phenomena are explained; design challenges and factors influencing efficiency are explored. Thermoacoustic processes involve complex multi-physical coupling and transient, highly non-linear relationships which are computationally expensive to model; appropriate numerical modelling techniques and options for analyses are presented. Potential methods of harvesting the energy in the acoustic waves are also examined.

Proof-of-principle test of coherent-state continuous variable quantum key distribution through turbulent atmosphere (Conference Presentation)

NASA Astrophysics Data System (ADS)

Derkach, Ivan D.; Peuntinger, Christian; Ruppert, László; Heim, Bettina; Gunthner, Kevin; Usenko, Vladyslav C.; Elser, Dominique; Marquardt, Christoph; Filip, Radim; Leuchs, Gerd

2016-10-01

Continuous-variable quantum key distribution is a practical application of quantum information theory that is aimed at generation of secret cryptographic key between two remote trusted parties and that uses multi-photon quantum states as carriers of key bits. Remote parties share the secret key via a quantum channel, that presumably is under control of of an eavesdropper, and which properties must be taken into account in the security analysis. Well-studied fiber-optical quantum channels commonly possess stable transmittance and low noise levels, while free-space channels represent a simpler, less demanding and more flexible alternative, but suffer from atmospheric effects such as turbulence that in particular causes a non-uniform transmittance distribution referred to as fading. Nonetheless free-space channels, providing an unobstructed line-of-sight, are more apt for short, mid-range and potentially long-range (using satellites) communication and will play an important role in the future development and implementation of QKD networks. It was previously theoretically shown that coherent-state CV QKD should be in principle possible to implement over a free-space fading channel, but strong transmittance fluctuations result in the significant modulation-dependent channel excess noise. In this regime the post-selection of highly transmitting sub-channels may be needed, which can even restore the security of the protocol in the strongly turbulent channels. We now report the first proof-of-principle experimental test of coherent state CV QKD protocol using different levels Gaussian modulation over a mid-range (1.6-kilometer long) free-space atmospheric quantum channel. The transmittance of the link was characterized using intensity measurements for the reference but channel estimation using the modulated coherent states was also studied. We consider security against Gaussian collective attacks, that were shown to be optimal against CV QKD protocols . We assumed a

A review of human factors principles for the design and implementation of medication safety alerts in clinical information systems.

PubMed

Phansalkar, Shobha; Edworthy, Judy; Hellier, Elizabeth; Seger, Diane L; Schedlbauer, Angela; Avery, Anthony J; Bates, David W

2010-01-01

The objective of this review is to describe the implementation of human factors principles for the design of alerts in clinical information systems. First, we conduct a review of alarm systems to identify human factors principles that are employed in the design and implementation of alerts. Second, we review the medical informatics literature to provide examples of the implementation of human factors principles in current clinical information systems using alerts to provide medication decision support. Last, we suggest actionable recommendations for delivering effective clinical decision support using alerts. A review of studies from the medical informatics literature suggests that many basic human factors principles are not followed, possibly contributing to the lack of acceptance of alerts in clinical information systems. We evaluate the limitations of current alerting philosophies and provide recommendations for improving acceptance of alerts by incorporating human factors principles in their design.

Designing Professional Development around Key Principles and Formative Assessments to Improve Teachers' Knowledge to Teach Mathematics

ERIC Educational Resources Information Center

Vendlinski, Terry P.; Hemberg, Bryan; Mundy, Chris; Phelan, Julia

2009-01-01

The authors' hypothesis is that if teachers (as experts) understand and teach concepts from the position of expertise teacher quality will improve. They believe that focusing on the key ideas will deepen both teacher and student understanding and allow learners to build the concepts necessary to form solid foundations for the application of…

76 FR 14825 - Core Principles and Other Requirements for Designated Contact Markets

Federal Register 2010, 2011, 2012, 2013, 2014

2011-03-18

... COMMODITY FUTURES TRADING COMMISSION 17 CFR Parts 1, 16, and 38 RIN 3038-AD09 Core Principles and Other Requirements for Designated Contact Markets AGENCY: Commodity Futures Trading Commission. ACTION... FURTHER INFORMATION CONTACT: Nancy Markowitz, Assistant Deputy Director, 202-418-5453, [email protected

Extending the Principles of Intensive Writing to Large Macroeconomics Classes

ERIC Educational Resources Information Center

Docherty, Peter; Tse, Harry; Forman, Ross; McKenzie, Jo

2010-01-01

The authors report on the design and implementation of a pilot program to extend the principles of intensive writing outlined by W. Lee Hansen (1998), Murray S. Simpson and Shireen E. Carroll (1999) and David Carless (2006) to large macroeconomics classes. The key aspect of this program was its collaborative nature, with staff from two specialist…

Multiscale Homogenization Theory: An Analysis Tool for Revealing Mechanical Design Principles in Bone and Bone Replacement Materials

NASA Astrophysics Data System (ADS)

Hellmich, Christian; Fritsch, Andreas; Dormieux, Luc

Biomimetics deals with the application of nature-made "design solutions" to the realm of engineering. In the quest to understand mechanical implications of structural hierarchies found in biological materials, multiscale mechanics may hold the key to understand "building plans" inherent to entire material classes, here bone and bone replacement materials. Analyzing a multitude of biophysical hierarchical and biomechanical experiments through homogenization theories for upscaling stiffness and strength properties reveals the following design principles: The elementary component "collagen" induces, right at the nanolevel, the mechanical anisotropy of bone materials, which is amplified by fibrillar collagen-based structures at the 100-nm scale, and by pores in the micrometer-to-millimeter regime. Hydroxyapatite minerals are poorly organized, and provide stiffness and strength in a quasi-brittle manner. Water layers between hydroxyapatite crystals govern the inelastic behavior of the nanocomposite, unless the "collagen reinforcement" breaks. Bone replacement materials should mimic these "microstructural mechanics" features as closely as possible if an imitation of the natural form of bone is desired (Gebeshuber et al., Adv Mater Res 74:265-268, 2009).

Design principles and algorithms for automated air traffic management

NASA Technical Reports Server (NTRS)

Erzberger, Heinz

1995-01-01

This paper presents design principles and algorithm for building a real time scheduler. The primary objective of the scheduler is to assign arrival aircraft to a favorable landing runway and schedule them to land at times that minimize delays. A further objective of the scheduler is to allocate delays between high altitude airspace far from the airport and low altitude airspace near the airport. A method of delay allocation is described that minimizes the average operating cost in the presence of errors in controlling aircraft to a specified landing time.

Intuitions, principles and consequences

PubMed Central

Shaw, A

2001-01-01

Some approaches to the assessment of moral intuitions are discussed. The controlled ethical trial isolates a moral issue from confounding factors and thereby clarifies what a person's intuition actually is. Casuistic reasoning from situations, where intuitions are clear, suggests or modifies principles, which can then help to make decisions in situations where intuitions are unclear. When intuitions are defended by a supporting principle, that principle can be tested by finding extreme cases, in which it is counterintuitive to follow the principle. An approach to the resolution of conflict between valid moral principles, specifically the utilitarian and justice principles, is considered. It is argued that even those who justify intuitions by a priori principles are often obliged to modify or support their principles by resort to the consideration of consequences. Key Words: Intuitions • principles • consequences • utilitarianism PMID:11233371

Mutual interferences and design principles for mechatronic devices in magnetic resonance imaging.

PubMed

Yu, Ningbo; Gassert, Roger; Riener, Robert

2011-07-01

Robotic and mechatronic devices that work compatibly with magnetic resonance imaging (MRI) are applied in diagnostic MRI, image-guided surgery, neurorehabilitation and neuroscience. MRI-compatible mechatronic systems must address the challenges imposed by the scanner's electromagnetic fields. We have developed objective quantitative evaluation criteria for device characteristics needed to formulate design guidelines that ensure MRI-compatibility based on safety, device functionality and image quality. The mutual interferences between an MRI system and mechatronic devices working in its vicinity are modeled and tested. For each interference, the involved components are listed, and a numerical measure for "MRI-compatibility" is proposed. These interferences are categorized into an MRI-compatibility matrix, with each element representing possible interactions between one part of the mechatronic system and one component of the electromagnetic fields. Based on this formulation, design principles for MRI-compatible mechatronic systems are proposed. Furthermore, test methods are developed to examine whether a mechatronic device indeed works without interferences within an MRI system. Finally, the proposed MRI-compatibility criteria and design guidelines have been applied to an actual design process that has been validated by the test procedures. Objective and quantitative MRI-compatibility measures for mechatronic and robotic devices have been established. Applying the proposed design principles, potential problems in safety, device functionality and image quality can be considered in the design phase to ensure that the mechatronic system will fulfill the MRI-compatibility criteria. New guidelines and test procedures for MRI instrument compatibility provide a rational basis for design and evaluation of mechatronic devices in various MRI applications. Designers can apply these criteria and use the tests, so that MRI-compatibility results can accrue to build an experiential

Screening of the key volatile organic compounds of Tuber melanosporum fermentation by aroma sensory evaluation combination with principle component analysis

PubMed Central

Liu, Rui-Sang; Jin, Guang-Huai; Xiao, Deng-Rong; Li, Hong-Mei; Bai, Feng-Wu; Tang, Ya-Jie

2015-01-01

Aroma results from the interplay of volatile organic compounds (VOCs) and the attributes of microbial-producing aromas are significantly affected by fermentation conditions. Among the VOCs, only a few of them contribute to aroma. Thus, screening and identification of the key VOCs is critical for microbial-producing aroma. The traditional method is based on gas chromatography-olfactometry (GC-O), which is time-consuming and laborious. Considering the Tuber melanosporum fermentation system as an example, a new method to screen and identify the key VOCs by combining the aroma evaluation method with principle component analysis (PCA) was developed in this work. First, an aroma sensory evaluation method was developed to screen 34 potential favorite aroma samples from 504 fermentation samples. Second, PCA was employed to screen nine common key VOCs from these 34 samples. Third, seven key VOCs were identified by the traditional method. Finally, all of the seven key VOCs identified by the traditional method were also identified, along with four others, by the new strategy. These results indicate the reliability of the new method and demonstrate it to be a viable alternative to the traditional method. PMID:26655663

Principles for designing proteins with cavities formed by curved β sheets

DOE Office of Scientific and Technical Information (OSTI.GOV)

Marcos, Enrique; Basanta, Benjamin; Chidyausiku, Tamuka M.

Active sites and ligand-binding cavities in native proteins are often formed by curved β sheets, and the ability to control β-sheet curvature would allow design of binding proteins with cavities customized to specific ligands. Toward this end, we investigated the mechanisms controlling β-sheet curvature by studying the geometry of β sheets in naturally occurring protein structures and folding simulations. The principles emerging from this analysis were used to design, de novo, a series of proteins with curved β sheets topped with α helices. Nuclear magnetic resonance and crystal structures of the designs closely match the computational models, showing that β-sheetmore » curvature can be controlled with atomic-level accuracy. Our approach enables the design of proteins with cavities and provides a route to custom design ligand-binding and catalytic sites.« less

Synthetic Elucidation of Design Principles for Molecular Qubits

NASA Astrophysics Data System (ADS)

Graham, Michael James

Quantum information processing (QIP) is an emerging computational paradigm with the potential to enable a vast increase in computational power, fundamentally transforming fields from structural biology to finance. QIP employs qubits, or quantum bits, as its fundamental units of information, which can exist in not just the classical states of 0 or 1, but in a superposition of the two. In order to successfully perform QIP, this superposition state must be sufficiently long-lived. One promising paradigm for the implementation of QIP involves employing unpaired electrons in coordination complexes as qubits. This architecture is highly tunable and scalable, however coordination complexes frequently suffer from short superposition lifetimes, or T2. In order to capitalize on the promise of molecular qubits, it is necessary to develop a set of design principles that allow the rational synthesis of complexes with sufficiently long values of T2. In this dissertation, I report efforts to use the synthesis of series of complexes to elucidate design principles for molecular qubits. Chapter 1 details previous work by our group and others in the field. Chapter 2 details the first efforts of our group to determine the impact of varying spin and spin-orbit coupling on T2. Chapter 3 examines the effect of removing nuclear spins on coherence time, and reports a series of vanadyl bis(dithiolene) complexes which exhibit extremely long coherence lifetimes, in excess of the 100 mus threshold for qubit viability. Chapters 4 and 5 form two complimentary halves of a study to determine the exact relationship between electronic spin-nuclear spin distance and the effect of the nuclear spins on T2. Finally, chapter 6 suggests next directions for the field as a whole, including the potential for work in this field to impact the development of other technologies as diverse as quantum sensors and magnetic resonance imaging contrast agents.

Key lessons for designing health literacy professional development courses.

PubMed

Naccarella, Lucio; Murphy, Bernice

2018-02-01

Health literacy courses for health professionals have emerged in response to health professionals' perceived lack of understanding of health literacy issues, and their failure to routinely adopt health literacy practices. Since 2013 in Victoria, Australia, the Centre for Culture, Ethnicity and Health has delivered an annual health literacy demonstration training course that it developed. Course development and delivery partners included HealthWest Partnership and cohealth. The courses are designed to develop the health literacy knowledge, skills and organisational capacity of the health and community services sector in the western metropolitan region of Melbourne. This study presents key learnings from evaluation data from three health literacy courses using Wenger's professional educational learning design framework. The framework has three educational learning architecture components (engagement, imagination and alignment) and four educational learning architecture dimensions (participation, emergent, local/global, identification). Participatory realist evaluation approaches and qualitative methods were used. The evaluations revealed that the health literacy courses are developing leadership in health literacy, building partnerships among course participants, developing health literacy workforce knowledge and skills, developing ways to use and apply health literacy resources and are serving as a catalyst for building organisational infrastructure. Although the courses were not explicitly developed or implemented using Wenger's educational learning design pedagogic features, the course structure (i.e. facilitation role of course coordinators, providing safe learning environments, encouraging small group work amongst participants, requiring participants to conduct mini-projects and sponsor organisation buy-in) provided opportunities for engagement, imagination and alignment. Wenger's educational learning design framework can inform the design of future key

Principles of Protein Stability and Their Application in Computational Design.

PubMed

Goldenzweig, Adi; Fleishman, Sarel

2018-01-26

Proteins are increasingly used in basic and applied biomedical research.Many proteins, however, are only marginally stable and can be expressed in limited amounts, thus hampering research and applications. Research has revealed the thermodynamic, cellular, and evolutionary principles and mechanisms that underlie marginal stability. With this growing understanding, computational stability design methods have advanced over the past two decades starting from methods that selectively addressed only some aspects of marginal stability. Current methods are more general and, by combining phylogenetic analysis with atomistic design, have shown drastic improvements in solubility, thermal stability, and aggregation resistance while maintaining the protein's primary molecular activity. Stability design is opening the way to rational engineering of improved enzymes, therapeutics, and vaccines and to the application of protein design methodology to large proteins and molecular activities that have proven challenging in the past. Expected final online publication date for the Annual Review of Biochemistry Volume 87 is June 20, 2018. Please see http://www.annualreviews.org/page/journal/pubdates for revised estimates.

Synthetic RNAs for Gene Regulation: Design Principles and Computational Tools

DOE Office of Scientific and Technical Information (OSTI.GOV)

Laganà, Alessandro, E-mail: alessandro.lagana@osumc.edu; Shasha, Dennis; Croce, Carlo Maria

The use of synthetic non-coding RNAs for post-transcriptional regulation of gene expression has not only become a standard laboratory tool for gene functional studies but it has also opened up new perspectives in the design of new and potentially promising therapeutic strategies. Bioinformatics has provided researchers with a variety of tools for the design, the analysis, and the evaluation of RNAi agents such as small-interfering RNA (siRNA), short-hairpin RNA (shRNA), artificial microRNA (a-miR), and microRNA sponges. More recently, a new system for genome engineering based on the bacterial CRISPR-Cas9 system (Clustered Regularly Interspaced Short Palindromic Repeats), was shown to havemore » the potential to also regulate gene expression at both transcriptional and post-transcriptional level in a more specific way. In this mini review, we present RNAi and CRISPRi design principles and discuss the advantages and limitations of the current design approaches.« less

Synthetic RNAs for Gene Regulation: Design Principles and Computational Tools

PubMed Central

Laganà, Alessandro; Shasha, Dennis; Croce, Carlo Maria

2014-01-01

The use of synthetic non-coding RNAs for post-transcriptional regulation of gene expression has not only become a standard laboratory tool for gene functional studies but it has also opened up new perspectives in the design of new and potentially promising therapeutic strategies. Bioinformatics has provided researchers with a variety of tools for the design, the analysis, and the evaluation of RNAi agents such as small-interfering RNA (siRNA), short-hairpin RNA (shRNA), artificial microRNA (a-miR), and microRNA sponges. More recently, a new system for genome engineering based on the bacterial CRISPR-Cas9 system (Clustered Regularly Interspaced Short Palindromic Repeats), was shown to have the potential to also regulate gene expression at both transcriptional and post-transcriptional level in a more specific way. In this mini review, we present RNAi and CRISPRi design principles and discuss the advantages and limitations of the current design approaches. PMID:25566532

Open-Shell-Character-Based Molecular Design Principles: Applications to Nonlinear Optics and Singlet Fission.

PubMed

Nakano, Masayoshi

2017-01-01

Open-shell character, e. g., diradical character, is a quantum chemically well-defined quantity in ground-state molecular systems, which is not an observable but can quantify the degree of effective bond weakness in the chemical sense or electron correlation strength in the physical sense. Because this quantity also correlates to specific excited states, physicochemical properties concerned with those states are expected to strongly correlate to the open-shell character. This feature enables us to open a new path to revealing the mechanism of these properties as well as to realizing new design principles for efficient functional molecular systems. This account explains the open-shell-character-based molecular design principles and introduces their applications to the rational design of highly efficient nonlinear optical and singlet fission molecular systems. © 2017 The Chemical Society of Japan & Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

"Citizen Jane": Rethinking Design Principles for Closing the Gender Gap in Computing.

ERIC Educational Resources Information Center

Raphael, Chad

This paper identifies three rationales in the relevant literature for closing the gender gap in computing: economic, cultural and political. Each rationale implies a different set of indicators of present inequalities, disparate goals for creating equality, and distinct principles for software and web site design that aims to help girls overcome…

Basic design principles of colorimetric vision systems

NASA Astrophysics Data System (ADS)

Mumzhiu, Alex M.

1998-10-01

Color measurement is an important part of overall production quality control in textile, coating, plastics, food, paper and other industries. The color measurement instruments such as colorimeters and spectrophotometers, used for production quality control have many limitations. In many applications they cannot be used for a variety of reasons and have to be replaced with human operators. Machine vision has great potential for color measurement. The components for color machine vision systems, such as broadcast quality 3-CCD cameras, fast and inexpensive PCI frame grabbers, and sophisticated image processing software packages are available. However the machine vision industry has only started to approach the color domain. The few color machine vision systems on the market, produced by the largest machine vision manufacturers have very limited capabilities. A lack of understanding that a vision based color measurement system could fail if it ignores the basic principles of colorimetry is the main reason for the slow progress of color vision systems. the purpose of this paper is to clarify how color measurement principles have to be applied to vision systems and how the electro-optical design features of colorimeters have to be modified in order to implement them for vision systems. The subject of this presentation far exceeds the limitations of a journal paper so only the most important aspects will be discussed. An overview of the major areas of applications for colorimetric vision system will be discussed. Finally, the reasons why some customers are happy with their vision systems and some are not will be analyzed.

Design and evaluation of potentiometric principles for bladder volume monitoring: a preliminary study.

PubMed

Chen, Shih-Ching; Hsieh, Tsung-Hsun; Fan, Wen-Jia; Lai, Chien-Hung; Chen, Chun-Lung; Wei, Wei-Feng; Peng, Chih-Wei

2015-06-01

Recent advances in microelectronics and wireless transmission technology have led to the development of various implantable sensors for real-time monitoring of bladder conditions. Although various sensing approaches for monitoring bladder conditions were reported, most such sensors have remained at the laboratory stage due to the existence of vital drawbacks. In the present study, we explored a new concept for monitoring the bladder capacity on the basis of potentiometric principles. A prototype of a potentiometer module was designed and fabricated and integrated with a commercial wireless transmission module and power unit. A series of in vitro pig bladder experiments was conducted to determine the best design parameters for implementing the prototype potentiometric device and to prove its feasibility. We successfully implemented the potentiometric module in a pig bladder model in vitro, and the error of the accuracy of bladder volume detection was <±3%. Although the proposed potentiometric device was built using a commercial wireless module, the design principles and animal experience gathered from this research can serve as a basis for developing new implantable bladder sensors in the future.

Design of virtual simulation experiment based on key events

NASA Astrophysics Data System (ADS)

Zhong, Zheng; Zhou, Dongbo; Song, Lingxiu

2018-06-01

Considering complex content and lacking of guidance in virtual simulation experiments, the key event technology in VR narrative theory was introduced for virtual simulation experiment to enhance fidelity and vividness process. Based on the VR narrative technology, an event transition structure was designed to meet the need of experimental operation process, and an interactive event processing model was used to generate key events in interactive scene. The experiment of" margin value of bees foraging" based on Biologic morphology was taken as an example, many objects, behaviors and other contents were reorganized. The result shows that this method can enhance the user's experience and ensure experimental process complete and effectively.

Basic principles of test-negative design in evaluating influenza vaccine effectiveness.

PubMed

Fukushima, Wakaba; Hirota, Yoshio

2017-08-24

Based on the unique characteristics of influenza, the concept of "monitoring" influenza vaccine effectiveness (VE) across the seasons using the same observational study design has been developed. In recent years, there has been a growing number of influenza VE reports using the test-negative design, which can minimize both misclassification of diseases and confounding by health care-seeking behavior. Although the test-negative designs offer considerable advantages, there are some concerns that widespread use of the test-negative design without knowledge of the basic principles of epidemiology could produce invalid findings. In this article, we briefly review the basic concepts of the test-negative design with respect to classic study design such as cohort studies or case-control studies. We also mention selection bias, which may be of concern in some countries where rapid diagnostic testing is frequently used in routine clinical practices, as in Japan. Copyright © 2017. Published by Elsevier Ltd.

Basic principles of stability.

PubMed

Egan, William; Schofield, Timothy

2009-11-01

An understanding of the principles of degradation, as well as the statistical tools for measuring product stability, is essential to management of product quality. Key to this is management of vaccine potency. Vaccine shelf life is best managed through determination of a minimum potency release requirement, which helps assure adequate potency throughout expiry. Use of statistical tools such a least squares regression analysis should be employed to model potency decay. The use of such tools provides incentive to properly design vaccine stability studies, while holding stability measurements to specification presents a disincentive for collecting valuable data. The laws of kinetics such as Arrhenius behavior help practitioners design effective accelerated stability programs, which can be utilized to manage stability after a process change. Design of stability studies should be carefully considered, with an eye to minimizing the variability of the stability parameter. In the case of measuring the degradation rate, testing at the beginning and the end of the study improves the precision of this estimate. Additional design considerations such as bracketing and matrixing improve the efficiency of stability evaluation of vaccines.

World Key Information Service System Designed For EPCOT Center

NASA Astrophysics Data System (ADS)

Kelsey, J. A.

1984-03-01

An advanced Bell Laboratories and Western Electric designed electronic information retrieval system utilizing the latest Information Age technologies, and a fiber optic transmission system is featured at the Walt Disney World Resort's newest theme park - The Experimental Prototype Community of Tomorrow (EPCOT Center). The project is an interactive audio, video and text information system that is deployed at key locations within the park. The touch sensitive terminals utilizing the ARIEL (Automatic Retrieval of Information Electronically) System is interconnected by a Western Electric designed and manufactured lightwave transmission system.

Design principles for functional liquid crystals

NASA Astrophysics Data System (ADS)

Bedolla Pantoja, Marco A.

dense mats of polymer fibers that extended from the solid substrate across the thickness of the LC film. Remarkably, these fibers possess uniform shapes, diameters and lengths. The results demonstrate that the morphological properties of the fibers (shape, diameter and length) are determined by the orientation, chemical structure and thickness of the LC used during polymerization. In a demonstration of these effects, mats of nanofibers exhibiting left-handed or right-handed optical activity were synthesized using left-handed or right-handed cholesteric LCs. The results presented in this dissertation are also used to motivate the proposal that growth of the nanofibers is controlled by local regions of high elastic strain in the LC at the tip of the nanofiber, which lead to preferential diffusion and subsequent addition of monomer to the apex of the growing polymeric structure. Finally, I discuss two examples that demonstrate potential applications of these nanofibers: (1) functionalization of mats of fibers with biologically-relevant molecules, and (2) fabrication of nanofibers in complex geometries. These experiments suggest that mats of polymeric nanofibers could find applications in biomedicine, filtration, chemical sensing or separation systems. Overall, these studies contribute new principles for the design of LC-based stimuli-responsive materials and for LC-templated synthesis of polymeric nanostructures using chemical vapor deposition. The principles reported in this dissertation provide guidance to the design of LC-based materials with broad potential engineering applications.

Structural principles for computational and de novo design of 4Fe-4S metalloproteins

PubMed Central

Nanda, Vikas; Senn, Stefan; Pike, Douglas H.; Rodriguez-Granillo, Agustina; Hansen, Will; Khare, Sagar D.; Noy, Dror

2017-01-01

Iron-sulfur centers in metalloproteins can access multiple oxidation states over a broad range of potentials, allowing them to participate in a variety of electron transfer reactions and serving as catalysts for high-energy redox processes. The nitrogenase FeMoCO cluster converts di-nitrogen to ammonia in an eight-electron transfer step. The 2(Fe4S4) containing bacterial ferredoxin is an evolutionarily ancient metalloprotein fold and is thought to be a primordial progenitor of extant oxidoreductases. Controlling chemical transformations mediated by iron-sulfur centers such as nitrogen fixation, hydrogen production as well as electron transfer reactions involved in photosynthesis are of tremendous importance for sustainable chemistry and energy production initiatives. As such, there is significant interest in the design of iron-sulfur proteins as minimal models to gain fundamental understanding of complex natural systems and as lead-molecules for industrial and energy applications. Herein, we discuss salient structural characteristics of natural iron-sulfur proteins and how they guide principles for design. Model structures of past designs are analyzed in the context of these principles and potential directions for enhanced designs are presented, and new areas of iron-sulfur protein design are proposed. PMID:26449207

Single service point: it's all in the design.

PubMed

Bradigan, Pamela S; Rodman, Ruey L

2008-01-01

"Design thinking" principles from a leading design firm, IDEO, were key elements in the planning process for a one-desk service model, the ASK Desk, at the John A. Prior Health Sciences Library. The library administration and staff employed the methodology to enhance customer experiences, meet technology challenges, and compete in a changing education environment. The most recent renovations demonstrate how the principles were applied. The concept of "continuous design thinking" is important in the library's daily operations to serve customers most effectively.

Accessible by Design: Applying UDL Principles in a First Year Undergraduate Course

ERIC Educational Resources Information Center

Kumar, Kari Lynne; Wideman, Maureen

2014-01-01

This article presents a case study of a technology-enhanced face-to-face health sciences course in which the principles of Universal Design for Learning (UDL) were applied. Students were offered a variety of means of representation, engagement, and expression throughout the course, and were surveyed and interviewed at the end of the term to…

Design and Properties Prediction of AMCO3F by First-Principles Calculations.

PubMed

Tian, Meng; Gao, Yurui; Ouyang, Chuying; Wang, Zhaoxiang; Chen, Liquan

2017-04-19

Computer simulation accelerates the rate of identification and application of new materials. To search for new materials to meet the increasing demands of secondary batteries with higher energy density, the properties of some transition-metal fluorocarbonates ([CO 3 F] 3- ) were simulated in this work as cathode materials for Li- and Na-ion batteries based on first-principles calculations. These materials were designed by substituting the K + ions in KCuCO 3 F with Li + or Na + ions and the Cu 2+ ions with transition-metal ions such as Fe 2+ , Co 2+ , Ni 2+ , and Mn 2+ ions, respectively. The phase stability, electronic conductivity, ionic diffusion, and electrochemical potential of these materials were calculated by first-principles calculations. After taking comprehensive consideration of the kinetic and thermodynamic properties, LiCoCO 3 F and LiFeCO 3 F are believed to be promising novel cathode materials in all of the calculated AMCO 3 F (A = Li and Na; M = Fe, Mn, Co, and Ni). These results will help the design and discovery of new materials for secondary batteries.

Applying Human Factors Principles to Mitigate Usability Issues Related to Embedded Assumptions in Health Information Technology Design

PubMed Central

Lowry, Svetlana Z; Patterson, Emily S

2014-01-01

Background There is growing recognition that design flaws in health information technology (HIT) lead to increased cognitive work, impact workflows, and produce other undesirable user experiences that contribute to usability issues and, in some cases, patient harm. These usability issues may in turn contribute to HIT utilization disparities and patient safety concerns, particularly among “non-typical” HIT users and their health care providers. Health care disparities are associated with poor health outcomes, premature death, and increased health care costs. HIT has the potential to reduce these disparate outcomes. In the computer science field, it has long been recognized that embedded cultural assumptions can reduce the usability, usefulness, and safety of HIT systems for populations whose characteristics differ from “stereotypical” users. Among these non-typical users, inappropriate embedded design assumptions may contribute to health care disparities. It is unclear how to address potentially inappropriate embedded HIT design assumptions once detected. Objective The objective of this paper is to explain HIT universal design principles derived from the human factors engineering literature that can help to overcome potential usability and/or patient safety issues that are associated with unrecognized, embedded assumptions about cultural groups when designing HIT systems. Methods Existing best practices, guidance, and standards in software usability and accessibility were subjected to a 5-step expert review process to identify and summarize those best practices, guidance, and standards that could help identify and/or address embedded design assumptions in HIT that could negatively impact patient safety, particularly for non-majority HIT user populations. An iterative consensus-based process was then used to derive evidence-based design principles from the data to address potentially inappropriate embedded cultural assumptions. Results Design principles that

Applying Human Factors Principles to Mitigate Usability Issues Related to Embedded Assumptions in Health Information Technology Design.

PubMed

Gibbons, Michael C; Lowry, Svetlana Z; Patterson, Emily S

2014-12-18

There is growing recognition that design flaws in health information technology (HIT) lead to increased cognitive work, impact workflows, and produce other undesirable user experiences that contribute to usability issues and, in some cases, patient harm. These usability issues may in turn contribute to HIT utilization disparities and patient safety concerns, particularly among "non-typical" HIT users and their health care providers. Health care disparities are associated with poor health outcomes, premature death, and increased health care costs. HIT has the potential to reduce these disparate outcomes. In the computer science field, it has long been recognized that embedded cultural assumptions can reduce the usability, usefulness, and safety of HIT systems for populations whose characteristics differ from "stereotypical" users. Among these non-typical users, inappropriate embedded design assumptions may contribute to health care disparities. It is unclear how to address potentially inappropriate embedded HIT design assumptions once detected. The objective of this paper is to explain HIT universal design principles derived from the human factors engineering literature that can help to overcome potential usability and/or patient safety issues that are associated with unrecognized, embedded assumptions about cultural groups when designing HIT systems. Existing best practices, guidance, and standards in software usability and accessibility were subjected to a 5-step expert review process to identify and summarize those best practices, guidance, and standards that could help identify and/or address embedded design assumptions in HIT that could negatively impact patient safety, particularly for non-majority HIT user populations. An iterative consensus-based process was then used to derive evidence-based design principles from the data to address potentially inappropriate embedded cultural assumptions. Design principles that may help identify and address embedded HIT

Principles of visual key construction-with a visual identification key to the Fagaceae of the southeastern United States.

PubMed

Kirchoff, Bruce K; Leggett, Roxanne; Her, Va; Moua, Chue; Morrison, Jessica; Poole, Chamika

2011-01-01

Advances in digital imaging have made possible the creation of completely visual keys. By a visual key we mean a key based primarily on images, and that contains a minimal amount of text. Characters in visual keys are visually, not verbally defined. In this paper we create the first primarily visual key to a group of taxa, in this case the Fagaceae of the southeastern USA. We also modify our recently published set of best practices for image use in illustrated keys to make them applicable to visual keys. Photographs of the Fagaceae were obtained from internet and herbarium databases or were taken specifically for this project. The images were printed and then sorted into hierarchical groups. These hierarchical groups of images were used to create the 'couplets' in the key. A reciprocal process of key creation and testing was used to produce the final keys. Four keys were created, one for each of the parts-leaves, buds, fruits and bark. Species description pages consisting of multiple images were also created for each of the species in the key. Creation and testing of the key resulted in a modified list of best practices for image use visual keys. The inclusion of images into paper and electronic keys has greatly increased their ease of use. However, virtually all of these keys are still based upon verbally defined, atomistic characters. The creation of primarily visual keys allows us to overcome the well-known limitations of linguistic-based characters and create keys that are much easier to use, especially for botanical novices.

Design rules of heteroatom-doped graphene to achieve high performance lithium-sulfur batteries: Both strong anchoring and catalysing based on first principles calculation.

PubMed

Zhang, Lin; Liang, Pei; Shu, Hai B; Man, Xiao L; Du, Xiao Q; Chao, Dong L; Liu, Zu G; Sun, Yu P; Wan, Hou Z; Wang, Hao

2018-06-18

A number of observations have been reported on chemical capture and catalysis of anchoring materials for lithium-sulfur batteries. Here, we propose the design principles for the chemical functioned graphene as an anchor material to realize both strong chemical trapping and catalysis. Through the first principle, the periodic law is calculated from the theory. Seven different co-doping series were investigated, e.g. MN 4 @graphene (M = V, Cr, Mn, Fe, Co, Ni, and Cu). From binding energy, partial density of state, and charge density difference analysis, the FeN 4 and CrN 4 co-doped graphene show good performance for the lithium-sulfur battery from both strong anchoring and catalytic effects. For the most kinds of Li 2 S x (x = 1, 2, 4, 6, 8) absorption, two combinations can be achieved, including S-bonding and Li-bonding. The competition between the MS and the NLi shows the main difference of the co-doped configurations. Moreover, the S-bonding systems have better performance for both moderate chemical trapping and strong catalysis. The binding energies of Li 2 S x and Li decomposed properties considered as the key descriptors for the rational design of lithium-sulfur battery. Lastly, we offer design rules for high performance lithium-sulfur batteries based on the chemical functional graphene materials. Copyright © 2018 Elsevier Inc. All rights reserved.

A Comprehensive Algorithm for Approval of Health Technologies With, Without, or Only in Research: The Key Principles for Informing Coverage Decisions.

PubMed

Claxton, Karl; Palmer, Stephen; Longworth, Louise; Bojke, Laura; Griffin, Susan; Soares, Marta; Spackman, Eldon; Rothery, Claire

The value of evidence about the performance of a technology and the value of access to a technology are central to policy decisions regarding coverage with, without, or only in research and managed entry (or risk-sharing) agreements. We aim to outline the key principles of what assessments are needed to inform "only in research" (OIR) or "approval with research" (AWR) recommendations, in addition to approval or rejection. We developed a comprehensive algorithm to inform the sequence of assessments and judgments that lead to different types of guidance: OIR, AWR, Approve, or Reject. This algorithm identifies the order in which assessments might be made, how similar guidance might be arrived at through different combinations of considerations, and when guidance might change. The key principles are whether the technology is expected to be cost-effective; whether the technology has significant irrecoverable costs; whether additional research is needed; whether research is possible with approval and whether there are opportunity costs that once committed by approval cannot be recovered; and whether there are effective price reductions. Determining expected cost-effectiveness is only a first step. In addition to AWR for technologies expected to be cost-effective and OIR for those not expected to be cost-effective, there are other important circumstances when OIR should be considered. These principles demonstrate that cost-effectiveness is a necessary but not sufficient condition for approval. Even when research is possible with approval, OIR may be appropriate when a technology is expected to be cost-effective due to significant irrecoverable costs. Copyright © 2016 International Society for Pharmacoeconomics and Outcomes Research (ISPOR). Published by Elsevier Inc. All rights reserved.

Beyond Universal Design for Learning: Guiding Principles to Reduce Barriers to Digital & Media Literacy Competence

ERIC Educational Resources Information Center

Dalton, Elizabeth M.

2017-01-01

Universal Design for Learning (UDL), a framework for designing instruction to address the wide range of learner variation in today's inclusive classrooms, can be applied effectively to broaden access, understanding, and engagement in digital and media literacy learning for ALL. UDL supports constructivist learning principles. UDL strategies and…

Using biological principles to design MEMS

NASA Astrophysics Data System (ADS)

Scherge, M.; Gorb, S. N.

2000-09-01

In micromechanics the handling and positioning of microparts involves sophisticated assembly procedures and a good understanding of microtribological phenomena. Due to the very low object mass, adhesion between the micropart and the handling tool (usually a mechanical gripper) becomes a performance-limiting factor. Adhesion effects can be even larger than the force that frees the micropart from the handling tool thus making correct positioning impossible. Many useful design principles for optimized adhesion properties can be found in biological systems. In this paper adhesion between the foot of an insect and a surface was evaluated. The attachment pads of the great green bush cricket (Tettigonia viridissima) - used to attach the insect safely to a variety of different surfaces - were investigated to draw conclusions that could be implemented in future technical microsystems. It is shown that the attachment pads are flexible micromechanical units capable of self-adjusting to different scales of roughness. The erratic influence of capillary action due to adsorbed water is presumably suppressed by a hydrophobic layer on the pads. Attaching and releasing mechanisms as well as accurate measurement of the adhesion force are discussed in detail.

Materials design principles of ancient fish armour

NASA Astrophysics Data System (ADS)

Bruet, Benjamin J. F.; Song, Juha; Boyce, Mary C.; Ortiz, Christine

2008-09-01

Knowledge of the structure-property-function relationships of dermal scales of armoured fish could enable pathways to improved bioinspired human body armour, and may provide clues to the evolutionary origins of mineralized tissues. Here, we present a multiscale experimental and computational approach that reveals the materials design principles present within individual ganoid scales from the `living fossil' Polypterus senegalus. This fish belongs to the ancient family Polypteridae, which first appeared 96 million years ago during the Cretaceous period and still retains many of their characteristics. The mechanistic origins of penetration resistance (approximating a biting attack) were investigated and found to include the juxtaposition of multiple distinct reinforcing composite layers that each undergo their own unique deformation mechanisms, a unique spatial functional form of mechanical properties with regions of differing levels of gradation within and between material layers, and layers with an undetectable gradation, load-dependent effective material properties, circumferential surface cracking, orthogonal microcracking in laminated sublayers and geometrically corrugated junctions between layers.

Materials design principles of ancient fish armour.

PubMed

Bruet, Benjamin J F; Song, Juha; Boyce, Mary C; Ortiz, Christine

2008-09-01

Knowledge of the structure-property-function relationships of dermal scales of armoured fish could enable pathways to improved bioinspired human body armour, and may provide clues to the evolutionary origins of mineralized tissues. Here, we present a multiscale experimental and computational approach that reveals the materials design principles present within individual ganoid scales from the 'living fossil' Polypterus senegalus. This fish belongs to the ancient family Polypteridae, which first appeared 96 million years ago during the Cretaceous period and still retains many of their characteristics. The mechanistic origins of penetration resistance (approximating a biting attack) were investigated and found to include the juxtaposition of multiple distinct reinforcing composite layers that each undergo their own unique deformation mechanisms, a unique spatial functional form of mechanical properties with regions of differing levels of gradation within and between material layers, and layers with an undetectable gradation, load-dependent effective material properties, circumferential surface cracking, orthogonal microcracking in laminated sublayers and geometrically corrugated junctions between layers.

Twelve tips for utilizing principles of learning to support medical education.

PubMed

Cutting, Maris F; Saks, Norma Susswein

2012-01-01

Research in the cognitive sciences on learning and memory conducted across a range of domains, settings, and age groups has resulted in the identification and formulation of a set of generic learning principles. These learning principles have proven relevant and applicable to a wide range of learning situations in a variety of settings, and can be useful in supporting medical education. They can provide guidance to medical students for efficient and effective study, and can be helpful to faculty to support instructional planning and decisions relating to curriculum. This article discusses evidence-based principles of learning and their relationship to effective learning, teaching, pedagogy and curriculum development. We reviewed important principles of learning to determine those most relevant to improving medical student learning, guiding faculty toward more effective teaching, and in designing a curriculum. Our analysis has resulted in the articulation of key learning principles and specific strategies that are broadly applicable to medical school learning, teaching, and instructional planning. The twelve tips highlight principles of learning that can be effectively applied in the complex learning environment of medical education.

Structure of the Trehalose-6-phosphate Phosphatase from Brugia malayi Reveals Key Design Principles for Anthelmintic Drugs

PubMed Central

Farelli, Jeremiah D.; Galvin, Brendan D.; Li, Zhiru; Liu, Chunliang; Aono, Miyuki; Garland, Megan; Hallett, Olivia E.; Causey, Thomas B.; Ali-Reynolds, Alana; Saltzberg, Daniel J.; Carlow, Clotilde K. S.; Dunaway-Mariano, Debra; Allen, Karen N.

2014-01-01

Parasitic nematodes are responsible for devastating illnesses that plague many of the world's poorest populations indigenous to the tropical areas of developing nations. Among these diseases is lymphatic filariasis, a major cause of permanent and long-term disability. Proteins essential to nematodes that do not have mammalian counterparts represent targets for therapeutic inhibitor discovery. One promising target is trehalose-6-phosphate phosphatase (T6PP) from Brugia malayi. In the model nematode Caenorhabditis elegans, T6PP is essential for survival due to the toxic effect(s) of the accumulation of trehalose 6-phosphate. T6PP has also been shown to be essential in Mycobacterium tuberculosis. We determined the X-ray crystal structure of T6PP from B. malayi. The protein structure revealed a stabilizing N-terminal MIT-like domain and a catalytic C-terminal C2B-type HAD phosphatase fold. Structure-guided mutagenesis, combined with kinetic analyses using a designed competitive inhibitor, trehalose 6-sulfate, identified five residues important for binding and catalysis. This structure-function analysis along with computational mapping provided the basis for the proposed model of the T6PP-trehalose 6-phosphate complex. The model indicates a substrate-binding mode wherein shape complementarity and van der Waals interactions drive recognition. The mode of binding is in sharp contrast to the homolog sucrose-6-phosphate phosphatase where extensive hydrogen-bond interactions are made to the substrate. Together these results suggest that high-affinity inhibitors will be bi-dentate, taking advantage of substrate-like binding to the phosphoryl-binding pocket while simultaneously utilizing non-native binding to the trehalose pocket. The conservation of the key residues that enforce the shape of the substrate pocket in T6PP enzymes suggest that development of broad-range anthelmintic and antibacterial therapeutics employing this platform may be possible. PMID:24992307

Using Intelligent Tutoring Design Principles To Integrate Cognitive Theory into Computer-Based Instruction.

ERIC Educational Resources Information Center

Orey, Michael A.; Nelson, Wayne A.

Arguing that the evolution of intelligent tutoring systems better reflects the recent theoretical developments of cognitive science than traditional computer-based instruction (CBI), this paper describes a general model for an intelligent tutoring system and suggests ways to improve CBI using design principles derived from research in cognitive…

Zebrafish housing systems: a review of basic operating principles and considerations for design and functionality.

PubMed

Lawrence, Christian; Mason, Timothy

2012-01-01

The strategies for housing zebrafish used in biomedical research have evolved considerably over the past three decades. To keep pace with the rapid expansion and development of the zebrafish model system, the field has generally moved from keeping fish at the level of aquarium hobbyist to that of industrialized, recirculating aquaculture. Numerous commercial system vendors now offer increasingly sophisticated housing systems based on design principles that maximize the number of animals that can be housed in a given space footprint, and they are thus able to support large and diverse research programs. This review is designed to provide managers, lab animal veterinarians, investigators, and other parties responsible for care and use of these animals with a comprehensive overview of the basic operating and design principles of zebrafish housing systems. This information can be used to help plan the construction of new facilities and/or the upgrade and maintenance of existing operations.

Perceptions of Pre-Service Teachers on the Design of a Learning Environment Based on the Seven Principles of Good Practice

ERIC Educational Resources Information Center

Al-Furaih, Suad Abdul Aziz

2017-01-01

This study explored the perceptions of 88 pre-service teachers on the design of a learning environment using the Seven Principles of Good Practice and its effect on participants' abilities to create their Cloud Learning Environment (CLE). In designing the learning environment, a conceptual model under the name 7 Principles and Integrated Learning…

First-Principles Studies of Structure-Property Relationships: Enabling Design of Functional Materials

NASA Astrophysics Data System (ADS)

Zhou, Qunfei

First-principles calculations based on quantum mechanics have been proved to be powerful for accurately regenerating experimental results, uncovering underlying myths of experimental phenomena, and accelerating the design of innovative materials. This work has been motivated by the demand to design next-generation thermionic emitting cathodes and techniques to allow for synthesis of photo-responsive polymers on complex surfaces with controlled thickness and patterns. For Os-coated tungsten thermionic dispenser cathodes, we used first-principles methods to explore the bulk and surface properties of W-Os alloys in order to explain the previously observed experimental phenomena that thermionic emission varies significantly with W-Os alloy composition. Meanwhile, we have developed a new quantum mechanical approach to quantitatively predict the thermionic emission current density from materials perspective without any semi-empirical approximations or complicated analytical models, which leads to better understanding of thermionic emission mechanism. The methods from this work could be used to accelerate the design of next-generation thermionic cathodes. For photoresponsive materials, we designed a novel type of azobenzene-containing monomer for light-mediated ring-opening metathesis polymerization (ROMP) toward the fabrication of patterned, photo-responsive polymers by controlling ring strain energy (RSE) of the monomer that drives ROMP. This allows for unprecedented remote, noninvasive, instantaneous spatial and temporal control of photo-responsive polymer deposition on complex surfaces.This work on the above two different materials systems showed the power of quantum mechanical calculations on predicting, understanding and discovering the structures and properties of both known and unknown materials in a fast, efficient and reliable way.

Sensor of total hip arthoplasty wear designed on principle of scanning profilometry

NASA Astrophysics Data System (ADS)

Rössler, Tomas; Mandat, Dusan; Gallo, Jiri; Hrabovsky, Miroslav; Pochmon, Michal; Havranek, Vitezslav

2008-12-01

Total hip arthroplasty significantly improves the quality of life in majority of patients with osteoarthritis. However, prosthetic wear is a problem because of inducing the development of aseptic loosening and periprosthetic osteolysis which needs the revision surgery. Thus, the polyethylene wear measurement is the central to contemporary orthopaedics and this interesting has encouraged the development and improvement of both radiologic (in vivo) and non-radiologic (in vitro) methods for polyethylene wear quantification. The principles of polyethylene liner wear measurements are predominantly geometric; nevertheless, the realization of individual types of in vivo measurements brings with it the necessity of many simplifications and compromising steps to acquire approximately accurate values. In fact, the volumetric wear can be obtained by mathematical conversion based on the most linear shift of femoral head in the cup. However, such approach is understood to be somewhat insufficient. Our ongoing research pointed to the development of optical non-contact method for wear measurement and its results are introduced in this paper including the methodology designed for the usability validation of the method for the given purpose and the description of sensor, its principle, technical realization, design and parameters.

Putting Connectivist Principles into Practice: A Case Study of an Online Tertiary Course

ERIC Educational Resources Information Center

Armatas, Christine; Spratt, Christine; Vincent, Andrew

2014-01-01

The Bachelor of Enterprise Learning is a newly accredited undergraduate degree where connectivist principles have been used to guide design of active, student-centered learning activities. A key feature of the curriculum is that it incorporates technology as both a source of information and a tool. Examples from this course are provided in this…

Stiffness Parameter Design of Suspension Element of Under-Chassis-Equipment for A Rail Vehicle

NASA Astrophysics Data System (ADS)

Ma, Menglin; Wang, Chengqiang; Deng, Hai

2017-06-01

According to the frequency configuration requirements of the vibration of railway under-chassis-equipment, the three- dimension stiffness of the suspension elements of under-chassis-equipment is designed based on the static principle and dynamics principle. The design results of the concrete engineering case show that, compared with the design method based on the static principle, the three- dimension stiffness of the suspension elements designed by the dynamic principle design method is more uniform. The frequency and decoupling degree analysis show that the calculation frequency of under-chassis-equipment under the two design methods is basically the same as the predetermined frequency. Compared with the design method based on the static principle, the design method based on the dynamic principle is adopted. The decoupling degree can be kept high, and the coupling vibration of the corresponding vibration mode can be reduced effectively, which can effectively reduce the fatigue damage of the key parts of the hanging element.

Towards automating the discovery of certain innovative design principles through a clustering-based optimization technique

NASA Astrophysics Data System (ADS)

Bandaru, Sunith; Deb, Kalyanmoy

2011-09-01

In this article, a methodology is proposed for automatically extracting innovative design principles which make a system or process (subject to conflicting objectives) optimal using its Pareto-optimal dataset. Such 'higher knowledge' would not only help designers to execute the system better, but also enable them to predict how changes in one variable would affect other variables if the system has to retain its optimal behaviour. This in turn would help solve other similar systems with different parameter settings easily without the need to perform a fresh optimization task. The proposed methodology uses a clustering-based optimization technique and is capable of discovering hidden functional relationships between the variables, objective and constraint functions and any other function that the designer wishes to include as a 'basis function'. A number of engineering design problems are considered for which the mathematical structure of these explicit relationships exists and has been revealed by a previous study. A comparison with the multivariate adaptive regression splines (MARS) approach reveals the practicality of the proposed approach due to its ability to find meaningful design principles. The success of this procedure for automated innovization is highly encouraging and indicates its suitability for further development in tackling more complex design scenarios.

Zebrafish Housing Systems: A Review of Basic Operating Principles and Considerations for Design and Functionality

PubMed Central

Lawrence, Christian; Mason, Timothy

2015-01-01

The strategies for housing zebrafish used in biomedical research have evolved considerably over the past three decades. To keep pace with the rapid expansion and development of the zebrafish model system, the field has generally moved from keeping fish at the level of aquarium hobbyist to that of industrialized, recirculating aquaculture. Numerous commercial system vendors now offer increasingly sophisticated housing systems based on design principles that maximize the number of animals that can be housed in a given space footprint, and they are thus able to support large and diverse research programs. This review is designed to provide managers, lab animal veterinarians, investigators, and other parties responsible for care and use of these animals with a comprehensive overview of the basic operating and design principles of zebrafish housing systems. This information can be used to help plan the construction of new facilities and/or the upgrade and maintenance of existing operations. PMID:23382349

Preferences for Key Ethical Principles that Guide Business School Students

ERIC Educational Resources Information Center

Guyette, Roger; Piotrowski, Chris

2010-01-01

Business ethics is presently a major component of the business school curriculum. Although there has been much attention focused on the impact of such coursework on instilling ethical decision-making (Nguyen et al., 2008), there is sparse research on how business students view the major ethical principles that serve as the foundation of business…

Broadband FBG resonator seismometer: principle, key technique, self-noise, and seismic response analysis.

PubMed

Huang, Wenzhu; Zhang, Wentao; Luo, Yingbo; Li, Li; Liu, Wenyi; Li, Fang

2018-04-16

A broadband optical fiber seismometer based on FBG resonator is proposed for earthquake monitoring. The principle and key technique, high-resolution ultralow-frequency wavelength interrogation by dual-laser swept frequency and beat frequency method, are discussed and analyzed. From the simulation and test results, the seismometer works at broadband range from 0.01 Hz to 10 Hz with a sensitivity of better than 330 pm/g and the wavelength resolution of the interrogation system is better than 0.001 pm/√Hz from 0.1 Hz to 10 Hz. A three-channel correlation method is used to measure the self-noise of the seismometer. It reaches a noise level of 2.7 × 10 -7 ms -2 /√Hz@0.1 Hz, which is lower than the earth's background noise (the new high noise model, NHNM). An earthquake monitoring experiment is conducted in a low noise seismic station. The recorded seismic waves are analyzed, which suggests that the proposed seismometer has the ability to record the close microearthquake and distant great earthquake with a high signal-noise ratio (SNR). This is the first time that a FBG-based middle-long period seismometer with lower self-noise than NHNM and large dynamic range (100 dB) is reported.

Applying human factors principles to alert design increases efficiency and reduces prescribing errors in a scenario-based simulation

PubMed Central

Russ, Alissa L; Zillich, Alan J; Melton, Brittany L; Russell, Scott A; Chen, Siying; Spina, Jeffrey R; Weiner, Michael; Johnson, Elizabette G; Daggy, Joanne K; McManus, M Sue; Hawsey, Jason M; Puleo, Anthony G; Doebbeling, Bradley N; Saleem, Jason J

2014-01-01

Objective To apply human factors engineering principles to improve alert interface design. We hypothesized that incorporating human factors principles into alerts would improve usability, reduce workload for prescribers, and reduce prescribing errors. Materials and methods We performed a scenario-based simulation study using a counterbalanced, crossover design with 20 Veterans Affairs prescribers to compare original versus redesigned alerts. We redesigned drug–allergy, drug–drug interaction, and drug–disease alerts based upon human factors principles. We assessed usability (learnability of redesign, efficiency, satisfaction, and usability errors), perceived workload, and prescribing errors. Results Although prescribers received no training on the design changes, prescribers were able to resolve redesigned alerts more efficiently (median (IQR): 56 (47) s) compared to the original alerts (85 (71) s; p=0.015). In addition, prescribers rated redesigned alerts significantly higher than original alerts across several dimensions of satisfaction. Redesigned alerts led to a modest but significant reduction in workload (p=0.042) and significantly reduced the number of prescribing errors per prescriber (median (range): 2 (1–5) compared to original alerts: 4 (1–7); p=0.024). Discussion Aspects of the redesigned alerts that likely contributed to better prescribing include design modifications that reduced usability-related errors, providing clinical data closer to the point of decision, and displaying alert text in a tabular format. Displaying alert text in a tabular format may help prescribers extract information quickly and thereby increase responsiveness to alerts. Conclusions This simulation study provides evidence that applying human factors design principles to medication alerts can improve usability and prescribing outcomes. PMID:24668841

The evolution of tumour phylogenetics: principles and practice

PubMed Central

Schwartz, Russell; Schäffer, Alejandro A.

2018-01-01

Rapid advances in high-throughput sequencing and a growing realization of the importance of evolutionary theory to cancer genomics have led to a proliferation of phylogenetic studies of tumour progression. These studies have yielded not only new insights but also a plethora of experimental approaches, sometimes reaching conflicting or poorly supported conclusions. Here, we consider this body of work in light of the key computational principles underpinning phylogenetic inference, with the goal of providing practical guidance on the design and analysis of scientifically rigorous tumour phylogeny studies. We survey the range of methods and tools available to the researcher, their key applications, and the various unsolved problems, closing with a perspective on the prospects and broader implications of this field. PMID:28190876

The evolution of tumour phylogenetics: principles and practice.

PubMed

Schwartz, Russell; Schäffer, Alejandro A

2017-04-01

Rapid advances in high-throughput sequencing and a growing realization of the importance of evolutionary theory to cancer genomics have led to a proliferation of phylogenetic studies of tumour progression. These studies have yielded not only new insights but also a plethora of experimental approaches, sometimes reaching conflicting or poorly supported conclusions. Here, we consider this body of work in light of the key computational principles underpinning phylogenetic inference, with the goal of providing practical guidance on the design and analysis of scientifically rigorous tumour phylogeny studies. We survey the range of methods and tools available to the researcher, their key applications, and the various unsolved problems, closing with a perspective on the prospects and broader implications of this field.

The technology improvement and development of the new design-engineering principles of pilot bore directional drilling

NASA Astrophysics Data System (ADS)

Shadrina, A.; Saruev, L.; Vasenin, S.

2016-09-01

This paper addresses the effectiveness of impact energy use in pilot bore directional drilling at pipe driving. We establish and develop new design-engineering principles for this method. These principles are based on a drill string construction with a new nipple thread connection and a generator construction of strain waves transferred through the drill string. The experiment was conducted on a test bench. Strain measurement is used to estimate compression, tensile, shear and bending stresses in the drill string during the propagation of elastic waves. Finally, the main directions of pilot bore directional drilling improvement during pipe driving are determinated. The new engineering design, as components of the pilot bore directional drilling technology are presented.

Design Principles for Rapid Prototyping Forces Sensors using 3D Printing.

PubMed

Kesner, Samuel B; Howe, Robert D

2011-07-21

Force sensors provide critical information for robot manipulators, manufacturing processes, and haptic interfaces. Commercial force sensors, however, are generally not adapted to specific system requirements, resulting in sensors with excess size, cost, and fragility. To overcome these issues, 3D printers can be used to create components for the quick and inexpensive development of force sensors. Limitations of this rapid prototyping technology, however, require specialized design principles. In this paper, we discuss techniques for rapidly developing simple force sensors, including selecting and attaching metal flexures, using inexpensive and simple displacement transducers, and 3D printing features to aid in assembly. These design methods are illustrated through the design and fabrication of a miniature force sensor for the tip of a robotic catheter system. The resulting force sensor prototype can measure forces with an accuracy of as low as 2% of the 10 N measurement range.

Design principles for radiation-resistant solid solutions

NASA Astrophysics Data System (ADS)

Schuler, Thomas; Trinkle, Dallas R.; Bellon, Pascal; Averback, Robert

2017-05-01

We develop a multiscale approach to quantify the increase in the recombined fraction of point defects under irradiation resulting from dilute solute additions to a solid solution. This methodology provides design principles for radiation-resistant materials. Using an existing database of solute diffusivities, we identify Sb as one of the most efficient solutes for this purpose in a Cu matrix. We perform density-functional-theory calculations to obtain binding and migration energies of Sb atoms, vacancies, and self-interstitial atoms in various configurations. The computed data informs the self-consistent mean-field formalism to calculate transport coefficients, allowing us to make quantitative predictions of the recombined fraction of point defects as a function of temperature and irradiation rate using homogeneous rate equations. We identify two different mechanisms according to which solutes lead to an increase in the recombined fraction of point defects; at low temperature, solutes slow down vacancies (kinetic effect), while at high temperature, solutes stabilize vacancies in the solid solution (thermodynamic effect). Extension to other metallic matrices and solutes are discussed.

Learning Effects of a Science Textbook Designed with Adapted Cognitive Process Principles on Grade 5 Students

ERIC Educational Resources Information Center

Cheng, Ming-Chang; Chou, Pei-I; Wang, Ya-Ting; Lin, Chih-Ho

2015-01-01

This study investigates how the illustrations in a science textbook, with their design modified according to cognitive process principles, affected students' learning performance. The quasi-experimental design recruited two Grade 5 groups (N?=?58) as the research participants. The treatment group (n?=?30) used the modified version of the textbook,…

Global sustainability and key needs in future automotive design.

PubMed

McAuley, John W

2003-12-01

The number of light vehicle registrations is forecast to increase worldwide by a factor of 3-5 over the next 50 years. This will dramatically increase environmental impacts worldwide of automobiles and light trucks. If light vehicles are to be environmentally sustainable globally, the automotive industry must implement fundamental changes in future automotive design. Important factors in assessing automobile design needs include fuel economy and reduced emissions. Many design parameters can impact vehicle air emissions and energy consumption including alternative fuel or engine technologies, rolling resistance, aerodynamics, drive train design, friction, and vehicle weight. Of these, vehicle weight is key and will translate into reduced energy demand across all energy distribution elements. A new class of vehicles is needed that combines ultra-light design with a likely hybrid or fuel cell engine technology. This could increase efficiency by a factor of 3-5 and reduce air emissions as well. Advanced lightweight materials, such as plastics or composites, will need to overtake the present metal-based infrastructure. Incorporating design features to facilitate end-of-life recycling and recovery is also important. The trend will be towards fewer materials and parts in vehicle design, combined with ease of disassembly. Mono-material construction can create vehicle design with improved recyclability as well as reduced numbers of parts and weight.

The Baby Care Questionnaire: A measure of parenting principles and practices during infancy☆

PubMed Central

Winstanley, Alice; Gattis, Merideth

2013-01-01

The current report provides a new framework to explore the role of parenting practices and principles during infancy. We identify structure and attunement as key parenting principles during infancy. Structure represents reliance on regularity and routines in daily life. Attunement represents reliance on infant cues and close physical contact. We suggest parents’ relative endorsement of these parenting principles is related to their choices about practices such as feeding, holding and night-time sleeping. We designed the Baby Care Questionnaire to measure parents’ endorsement of structure and attunement, as well as their daily parenting practices. We report data demonstrating the factor structure, reliability and validity of the BCQ. The BCQ, to our knowledge, is the first comprehensive measure of parenting practices and principles during infancy. We conclude with a discussion of future directions for the measure. PMID:24050932

Academic Primer Series: Five Key Papers about Study Designs in Medical Education.

PubMed

Gottlieb, Michael; Chan, Teresa M; Fredette, Jenna; Messman, Anne; Robinson, Daniel W; Cooney, Robert; Boysen-Osborn, Megan; Sherbino, Jonathan

2017-06-01

A proper understanding of study design is essential to creating successful studies. This is also important when reading or peer reviewing publications. In this article, we aimed to identify and summarize key papers that would be helpful for faculty members interested in learning more about study design in medical education research. The online discussions of the 2016-2017 Academic Life in Emergency Medicine Faculty Incubator program included a robust and vigorous discussion about education study design, which highlighted a number of papers on that topic. We augmented this list of papers with further suggestions by expert mentors. Via this process, we created a list of 29 papers in total on the topic of medical education study design. After gathering these papers, our authorship group engaged in a modified Delphi approach to build consensus on the papers that were most valuable for the understanding of proper study design in medical education. We selected the top five most highly rated papers on the topic domain of study design as determined by our study group. We subsequently summarized these papers with respect to their relevance to junior faculty members and to faculty developers. This article summarizes five key papers addressing study design in medical education with discussions and applications for junior faculty members and faculty developers. These papers provide a basis upon which junior faculty members might build for developing and analyzing studies.

Key considerations in designing a speech brain-computer interface.

PubMed

Bocquelet, Florent; Hueber, Thomas; Girin, Laurent; Chabardès, Stéphan; Yvert, Blaise

2016-11-01

Restoring communication in case of aphasia is a key challenge for neurotechnologies. To this end, brain-computer strategies can be envisioned to allow artificial speech synthesis from the continuous decoding of neural signals underlying speech imagination. Such speech brain-computer interfaces do not exist yet and their design should consider three key choices that need to be made: the choice of appropriate brain regions to record neural activity from, the choice of an appropriate recording technique, and the choice of a neural decoding scheme in association with an appropriate speech synthesis method. These key considerations are discussed here in light of (1) the current understanding of the functional neuroanatomy of cortical areas underlying overt and covert speech production, (2) the available literature making use of a variety of brain recording techniques to better characterize and address the challenge of decoding cortical speech signals, and (3) the different speech synthesis approaches that can be considered depending on the level of speech representation (phonetic, acoustic or articulatory) envisioned to be decoded at the core of a speech BCI paradigm. Copyright © 2017 The Author(s). Published by Elsevier Ltd.. All rights reserved.

Key Design Elements of a Data Utility for National Biosurveillance: Event-driven Architecture, Caching, and Web Service Model

PubMed Central

Tsui, Fu-Chiang; Espino, Jeremy U.; Weng, Yan; Choudary, Arvinder; Su, Hoah-Der; Wagner, Michael M.

2005-01-01

The National Retail Data Monitor (NRDM) has monitored over-the-counter (OTC) medication sales in the United States since December 2002. The NRDM collects data from over 18,600 retail stores and processes over 0.6 million sales records per day. This paper describes key architectural features that we have found necessary for a data utility component in a national biosurveillance system. These elements include event-driven architecture to provide analyses of data in near real time, multiple levels of caching to improve query response time, high availability through the use of clustered servers, scalable data storage through the use of storage area networks and a web-service function for interoperation with affiliated systems. The methods and architectural principles are relevant to the design of any production data utility for public health surveillance—systems that collect data from multiple sources in near real time for use by analytic programs and user interfaces that have substantial requirements for time-series data aggregated in multiple dimensions. PMID:16779138

Key design elements of a data utility for national biosurveillance: event-driven architecture, caching, and Web service model.

PubMed

Tsui, Fu-Chiang; Espino, Jeremy U; Weng, Yan; Choudary, Arvinder; Su, Hoah-Der; Wagner, Michael M

2005-01-01

The National Retail Data Monitor (NRDM) has monitored over-the-counter (OTC) medication sales in the United States since December 2002. The NRDM collects data from over 18,600 retail stores and processes over 0.6 million sales records per day. This paper describes key architectural features that we have found necessary for a data utility component in a national biosurveillance system. These elements include event-driven architecture to provide analyses of data in near real time, multiple levels of caching to improve query response time, high availability through the use of clustered servers, scalable data storage through the use of storage area networks and a web-service function for interoperation with affiliated systems. The methods and architectural principles are relevant to the design of any production data utility for public health surveillance-systems that collect data from multiple sources in near real time for use by analytic programs and user interfaces that have substantial requirements for time-series data aggregated in multiple dimensions.

[Anatomical key points and operative principle of "two planes and four landmarks" in extralevator abdominoperineal excision].

PubMed

Ye, Yingjiang; Shen, Zhanlong; Wang, Shan

2014-11-01

Abominoperineal resection (APR) is the main approach of lower rectal cancer treatment. Recently, it was found that conventional APR had higher incidence rate of positive circumferential resection margin(CRM) and intraoperative perforation (IOP), which was the crucial reason of local recurrence and worse prognosis. Extralevator abdominoperineal excision(ELAPE) procedure was proposed by European panels including surgeons, radiologist and pathologists, and considered to lower the positive rates of CRM and IOP. Definitive surgical planes and anatomic landmarks are the cores of this procedure, which are the prerequisite for the guarantee of safety and smoothness of surgery. To realize the anatomy of muscles, fascias, blood vessels and nervous of perineal region is the base of carrying out ELAPE procedure. In this paper, we introduce the key anatomy related to ELAPE procedure and summarize the principle of ELAPE procedure as "two planes and four landmarks", which will be beneficial to the popularization and application.

Using engineering control principles to inform the design of adaptive interventions: a conceptual introduction.

PubMed

Rivera, Daniel E; Pew, Michael D; Collins, Linda M

2007-05-01

The goal of this paper is to describe the role that control engineering principles can play in developing and improving the efficacy of adaptive, time-varying interventions. It is demonstrated that adaptive interventions constitute a form of feedback control system in the context of behavioral health. Consequently, drawing from ideas in control engineering has the potential to significantly inform the analysis, design, and implementation of adaptive interventions, leading to improved adherence, better management of limited resources, a reduction of negative effects, and overall more effective interventions. This article illustrates how to express an adaptive intervention in control engineering terms, and how to use this framework in a computer simulation to investigate the anticipated impact of intervention design choices on efficacy. The potential benefits of operationalizing decision rules based on control engineering principles are particularly significant for adaptive interventions that involve multiple components or address co-morbidities, situations that pose significant challenges to conventional clinical practice.

Using Engineering Control Principles to Inform the Design of Adaptive Interventions: A Conceptual Introduction

PubMed Central

Rivera, Daniel E.; Pew, Michael D.; Collins, Linda M.

2007-01-01

The goal of this paper is to describe the role that control engineering principles can play in developing and improving the efficacy of adaptive, time-varying interventions. It is demonstrated that adaptive interventions constitute a form of feedback control system in the context of behavioral health. Consequently, drawing from ideas in control engineering has the potential to significantly inform the analysis, design, and implementation of adaptive interventions, leading to improved adherence, better management of limited resources, a reduction of negative effects, and overall more effective interventions. This article illustrates how to express an adaptive intervention in control engineering terms, and how to use this framework in a computer simulation to investigate the anticipated impact of intervention design choices on efficacy. The potential benefits of operationalizing decision rules based on control engineering principles are particularly significant for adaptive interventions that involve multiple components or address co-morbidities, situations that pose significant challenges to conventional clinical practice. PMID:17169503

Mammalian designer cells: Engineering principles and biomedical applications.

PubMed

Xie, Mingqi; Fussenegger, Martin

2015-07-01

Biotechnology is a widely interdisciplinary field focusing on the use of living cells or organisms to solve established problems in medicine, food production and agriculture. Synthetic biology, the science of engineering complex biological systems that do not exist in nature, continues to provide the biotechnology industry with tools, technologies and intellectual property leading to improved cellular performance. One key aspect of synthetic biology is the engineering of deliberately reprogrammed designer cells whose behavior can be controlled over time and space. This review discusses the most commonly used techniques to engineer mammalian designer cells; while control elements acting on the transcriptional and translational levels of target gene expression determine the kinetic and dynamic profiles, coupling them to a variety of extracellular stimuli permits their remote control with user-defined trigger signals. Designer mammalian cells with novel or improved biological functions not only directly improve the production efficiency during biopharmaceutical manufacturing but also open the door for cell-based treatment strategies in molecular and translational medicine. In the future, the rational combination of multiple sets of designer cells could permit the construction and regulation of higher-order systems with increased complexity, thereby enabling the molecular reprogramming of tissues, organisms or even populations with highest precision. Copyright © 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

An Analysis of Factors that Inhibit Business Use of User-Centered Design Principles: A Delphi Study

ERIC Educational Resources Information Center

Hilton, Tod M.

2010-01-01

The use of user-centered design (UCD) principles has a positive impact on the use of web-based interactive systems in customer-centric organizations. User-centered design methodologies are not widely adopted in organizations due to intraorganizational factors. A qualitative study using a modified Delphi technique was used to identify the factors…

Translating Behavior Change Principles Into a Blended Exercise Intervention for Older Adults: Design Study.

PubMed

Mehra, Sumit; Visser, Bart; Dadema, Tessa; van den Helder, Jantine; Engelbert, Raoul Hh; Weijs, Peter Jm; Kröse, Ben Ja

2018-05-02

Physical activity can prevent or delay age-related impairments and prolong the ability of older adults to live independently. Community-based programs typically offer classes where older adults can exercise only once a week under the guidance of an instructor. The health benefits of such programs vary. Exercise frequency and the duration of the program play a key role in realizing effectiveness. An auxiliary home-based exercise program can provide older adults the opportunity to exercise more regularly over a prolonged period of time in the convenience of their own homes. Furthermore, mobile electronic devices can be used to motivate and remotely guide older adults to exercise in a safe manner. Such a blended intervention, where technology is combined with personal guidance, needs to incorporate behavior change principles to ensure effectiveness. The aim of this study was to identify theory-based components of a blended intervention that supports older adults to exercise at home. The Medical Research Council framework was used to develop the blended intervention. Insights from focus group, expert panels, and literature were combined into leading design considerations. A client-server system had been developed that combined a tablet app with a database in the cloud and a Web-based dashboard that can be used by a personal coach to remotely monitor and guide older adults. The app contains several components that facilitate behavior change-an interactive module for goal setting, the ability to draw up a personal training schedule from a library containing over 50 exercise videos, progress monitoring, and possibilities to receive remote feedback and guidance of a personal coach. An evidence-based blended intervention was designed to promote physical activity among older adults. The underlying design choices were underpinned by behavior change techniques that are rooted in self-regulation. Key components of the tablet-supported intervention were a tailored program that

On the application of motivation theory to human factors/ergonomics: motivational design principles for human-technology interaction.

PubMed

Szalma, James L

2014-12-01

Motivation is a driving force in human-technology interaction. This paper represents an effort to (a) describe a theoretical model of motivation in human technology interaction, (b) provide design principles and guidelines based on this theory, and (c) describe a sequence of steps for the. evaluation of motivational factors in human-technology interaction. Motivation theory has been relatively neglected in human factors/ergonomics (HF/E). In both research and practice, the (implicit) assumption has been that the operator is already motivated or that motivation is an organizational concern and beyond the purview of HF/E. However, technology can induce task-related boredom (e.g., automation) that can be stressful and also increase system vulnerability to performance failures. A theoretical model of motivation in human-technology interaction is proposed, based on extension of the self-determination theory of motivation to HF/E. This model provides the basis for both future research and for development of practical recommendations for design. General principles and guidelines for motivational design are described as well as a sequence of steps for the design process. Human motivation is an important concern for HF/E research and practice. Procedures in the design of both simple and complex technologies can, and should, include the evaluation of motivational characteristics of the task, interface, or system. In addition, researchers should investigate these factors in specific human-technology domains. The theory, principles, and guidelines described here can be incorporated into existing techniques for task analysis and for interface and system design.

The Roles and Uses of Design Principles for Developing the Trialogical Approach on Learning

ERIC Educational Resources Information Center

Paavola, Sami; Lakkala, Minna; Muukkonen, Hanni; Kosonen, Kari; Karlgren, Klas

2011-01-01

In the present paper, the development and use of a specific set of pedagogical design principles in a large research and development project are analysed. The project (the Knowledge Practices Laboratory) developed technology and a pedagogical approach to support certain kinds of collaborative knowledge creation practices related to the…

Creating, Evaluating, and Improving Humorous Cartoons Related to Design Principles for Gifted Education Programs

ERIC Educational Resources Information Center

Rule, Audrey C.; Schneider, Jean S.

2009-01-01

Humor through cartoons is an interesting way to engage students in learning course content. The purpose of this study was to document the process of graduate student-made cartoons that portrayed content about principles of designing gifted education programs. Seventeen graduate students enrolled in an introductory gifted education course…

Application of Instructional Design Principles in Developing an Online Information Literacy Curriculum.

PubMed

Mi, Misa

2016-01-01

An online information literacy curriculum was developed as an intervention to engage students in independent study and self-assessment of their learning needs and learning outcomes, develop proficiency in information skills, and foster lifelong learning. This column demonstrates how instructional design principles were applied to create the learning experiences integrated into various courses of the medical curriculum to promote active learning of information skills and maximize self-directed learning outcomes for lifelong learning.

Towards Rational Design of Functional Fluoride and Oxyfluoride Materials from First Principles

NASA Astrophysics Data System (ADS)

Charles, Nenian

Complex transition metal compounds (TMCs) research has produced functional materials with a range of properties, including ferroelectricity, colossal magnetoresistance, nonlinear optical activity and high-temperature superconductivity. Conventional routes to tune properties in transition metal oxides, for example, have relied primarily on cation chemical substitution and interfacial effects in thin film heterostructures. In heteroanionic TMCs, exhibiting two chemically distinct anions coordinating the same or different cations, engineering of the anion sub-lattice for property control is a promising alternative approach. The presence of multiple anions provides additional design variables, such as anion order, that are absent in homoanionic counterparts. The more complex structural and chemical phase space of heteroanionic materials provides a unique opportunity to realize enhanced or unanticipated electronic, optical, and magnetic responses. Although there is growing interest in heteroanionic materials, and synthetic and characterization advances are occurring for these materials, the crystal-chemistry principles for realizing structural and property control are only slowing emerging. This dissertation employs anion engineering to investigate phenomena in transition metal fluorides and oxyfluorides compounds using first principles density functional theory calculations. Oxyfluorides are particularly intriguing owing their tendency to stabilize highly ordered anion sublattices as well as the potential to combine the advantageous properties of transition metal oxides and fluorides. This work 1) addresses the challenges of studying fluorides and oxyfluorides using first principles calculations; 2) evaluates the feasibility of using external stimuli, such as epitaxial strain and hydrostatic pressure, to control properties of fluorides and oxyfluorides; and 3) formulates a computational workflow based on multiple levels of theory and computation to elucidate structure

On extracting design principles from biology: I. Method-General answers to high-level design questions for bioinspired robots.

PubMed

Haberland, M; Kim, S

2015-02-02

When millions of years of evolution suggest a particular design solution, we may be tempted to abandon traditional design methods and copy the biological example. However, biological solutions do not often translate directly into the engineering domain, and even when they do, copying eliminates the opportunity to improve. A better approach is to extract design principles relevant to the task of interest, incorporate them in engineering designs, and vet these candidates against others. This paper presents the first general framework for determining whether biologically inspired relationships between design input variables and output objectives and constraints are applicable to a variety of engineering systems. Using optimization and statistics to generalize the results beyond a particular system, the framework overcomes shortcomings observed of ad hoc methods, particularly those used in the challenging study of legged locomotion. The utility of the framework is demonstrated in a case study of the relative running efficiency of rotary-kneed and telescoping-legged robots.

Supporting Teachers in Designing CSCL Activities: A Case Study of Principle-Based Pedagogical Patterns in Networked Second Language Classrooms

ERIC Educational Resources Information Center

Wen, Yun; Looi, Chee-Kit; Chen, Wenli

2012-01-01

This paper proposes the identification and use of principle-based pedagogical patterns to help teachers to translate design principles into actionable teaching activities, and to scaffold student learning with sufficient flexibility and creativity. A set of pedagogical patterns for networked Second language (L2) learning, categorized and…

Teacher Viewpoints of Instructional Design Principles for Visuals in a Middle School Math Curriculum

ERIC Educational Resources Information Center

Clinton, Virginia; Cooper, Jennifer L.

2015-01-01

Instructional design principles for visuals in student materials have been developed through findings based on student-level measures. However, teacher viewpoints may be a rich source of information to better understand how visuals can be optimized for student learning. This study's purpose is to examine teacher viewpoints on visuals. In a…

Achieving Energy Efficiency in Accordance with Bioclimatic Architecture Principles

NASA Astrophysics Data System (ADS)

Bajcinovci, Bujar; Jerliu, Florina

2016-12-01

By using our natural resources, and through inefficient use of energy, we produce much waste that can be recycled as a useful resource, which further contributes to climate change. This study aims to address energy effective bioclimatic architecture principles, by which we can achieve a potential energy savings, estimated at thirty-three per cent, mainly through environmentally affordable reconstruction, resulting in low negative impact on the environment. The study presented in this paper investigated the Ulpiana neighbourhood of Prishtina City, focusing on urban design challenges, energy efficiency and air pollution issues. The research methods consist of empirical observations through the urban spatial area using a comparative method, in order to receive clearer data and information research is conducted within Ulpiana's urban blocks, shapes of architectural structures, with the objective focusing on bioclimatic features in terms of the morphology and microclimate of Ulpiana. Energy supply plays a key role in the economic development of any country, hence, bioclimatic design principles for sustainable architecture and energy efficiency, present an evolutive integrated strategy for achieving efficiency and healthier conditions for Kosovar communities. Conceptual findings indicate that with the integrated design strategy: energy efficiency, and passive bioclimatic principles will result in a bond of complex interrelation between nature, architecture, and community. The aim of this study is to promote structured organized actions to be taken in Prishtina, and Kosovo, which will result in improved energy efficiency in all sectors, and particularly in the residential housing sector.

Designing nanomaterials to maximize performance and minimize undesirable implications guided by the Principles of Green Chemistry.

PubMed

Gilbertson, Leanne M; Zimmerman, Julie B; Plata, Desiree L; Hutchison, James E; Anastas, Paul T

2015-08-21

The Twelve Principles of Green Chemistry were first published in 1998 and provide a framework that has been adopted not only by chemists, but also by design practitioners and decision-makers (e.g., materials scientists and regulators). The development of the Principles was initially motivated by the need to address decades of unintended environmental pollution and human health impacts from the production and use of hazardous chemicals. Yet, for over a decade now, the Principles have been applied to the synthesis and production of engineered nanomaterials (ENMs) and the products they enable. While the combined efforts of the global scientific community have led to promising advances in the field of nanotechnology, there remain significant research gaps and the opportunity to leverage the potential global economic, societal and environmental benefits of ENMs safely and sustainably. As such, this tutorial review benchmarks the successes to date and identifies critical research gaps to be considered as future opportunities for the community to address. A sustainable material design framework is proposed that emphasizes the importance of establishing structure-property-function (SPF) and structure-property-hazard (SPH) relationships to guide the rational design of ENMs. The goal is to achieve or exceed the functional performance of current materials and the technologies they enable, while minimizing inherent hazard to avoid risk to human health and the environment at all stages of the life cycle.

Design Principles for Covalent Organic Frameworks as Efficient Electrocatalysts in Clean Energy Conversion and Green Oxidizer Production.

PubMed

Lin, Chun-Yu; Zhang, Lipeng; Zhao, Zhenghang; Xia, Zhenhai

2017-05-01

Covalent organic frameworks (COFs), an emerging class of framework materials linked by covalent bonds, hold potential for various applications such as efficient electrocatalysts, photovoltaics, and sensors. To rationally design COF-based electrocatalysts for oxygen reduction and evolution reactions in fuel cells and metal-air batteries, activity descriptors, derived from orbital energy and bonding structures, are identified with the first-principle calculations for the COFs, which correlate COF structures with their catalytic activities. The calculations also predict that alkaline-earth metal-porphyrin COFs could catalyze the direct production of H 2 O 2 , a green oxidizer and an energy carrier. These predictions are supported by experimental data, and the design principles derived from the descriptors provide an approach for rational design of new electrocatalysts for both clean energy conversion and green oxidizer production. © 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Design Principles for Creating Locally-Rooted National Science and Mathematics Curricula in Timor-Leste

ERIC Educational Resources Information Center

Gabrielson, Curtis A.; Hsi, Sherry

2012-01-01

This paper articulates and illustrates design principles that guided the development of a set of hands-on teaching activities for the national science and mathematics curricula at junior-high and high-school level education in Timor-Leste, a small, low-income nation in Southeast Asia. A partnership between a university, an international science…

Principles for the formation of an effective concept of multifunctional high-rise construction investment projects

NASA Astrophysics Data System (ADS)

Beliakov, Sergei

2018-03-01

Investment projects of high-rise construction have a number of features that determine specific risks and additional opportunities that require analysis and accounting in the formation of an effective project concept. The most significant features of high-rise construction include long construction time, complexity of technical and technological solutions, complexity of decisions on the organization of construction and operation, high cost of construction and operation, complexity in determining the ratio of areas designed to accommodate different functional areas, when organizing and coordinating the operation of the facility, with internal zoning. Taking into account the specificity of high-rise construction, among the factors determining the effectiveness of projects, it is advisable to consider as key factors: organizational, technological and investment factors. Within the framework of the article, the author singled out key particular functions for each group of factors under consideration, and also developed a system of principles for the formation of an effective concept of multifunctional high-rise construction investment projects, including the principle of logistic efficiency, the principle of optimal functional zoning, the principle of efficiency of equipment use, the principle of optimizing technological processes, the principle maximization of income, the principle of fund management, the principle of risk management . The model of formation of an effective concept of investment projects of multifunctional high-rise construction developed by the author can contribute to the development of methodological tools in the field of managing the implementation of high-rise construction projects, taking into account their specificity in the current economic conditions.

Applying human factors principles to alert design increases efficiency and reduces prescribing errors in a scenario-based simulation.

PubMed

Russ, Alissa L; Zillich, Alan J; Melton, Brittany L; Russell, Scott A; Chen, Siying; Spina, Jeffrey R; Weiner, Michael; Johnson, Elizabette G; Daggy, Joanne K; McManus, M Sue; Hawsey, Jason M; Puleo, Anthony G; Doebbeling, Bradley N; Saleem, Jason J

2014-10-01

To apply human factors engineering principles to improve alert interface design. We hypothesized that incorporating human factors principles into alerts would improve usability, reduce workload for prescribers, and reduce prescribing errors. We performed a scenario-based simulation study using a counterbalanced, crossover design with 20 Veterans Affairs prescribers to compare original versus redesigned alerts. We redesigned drug-allergy, drug-drug interaction, and drug-disease alerts based upon human factors principles. We assessed usability (learnability of redesign, efficiency, satisfaction, and usability errors), perceived workload, and prescribing errors. Although prescribers received no training on the design changes, prescribers were able to resolve redesigned alerts more efficiently (median (IQR): 56 (47) s) compared to the original alerts (85 (71) s; p=0.015). In addition, prescribers rated redesigned alerts significantly higher than original alerts across several dimensions of satisfaction. Redesigned alerts led to a modest but significant reduction in workload (p=0.042) and significantly reduced the number of prescribing errors per prescriber (median (range): 2 (1-5) compared to original alerts: 4 (1-7); p=0.024). Aspects of the redesigned alerts that likely contributed to better prescribing include design modifications that reduced usability-related errors, providing clinical data closer to the point of decision, and displaying alert text in a tabular format. Displaying alert text in a tabular format may help prescribers extract information quickly and thereby increase responsiveness to alerts. This simulation study provides evidence that applying human factors design principles to medication alerts can improve usability and prescribing outcomes. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://group.bmj.com/group/rights-licensing/permissions.

Towards Synergistic Electrode-Electrolyte Design Principles for Nonaqueous Li-O[Formula: see text] batteries.

PubMed

Khetan, Abhishek; Krishnamurthy, Dilip; Viswanathan, Venkatasubramanian

2018-03-20

One route toward sustainable land and aerial transportation is based on electrified vehicles. To enable electrification in transportation, there is a need for high-energy-density batteries, and this has led to an enormous interest in lithium-oxygen batteries. Several critical challenges remain with respect to realizing a practical lithium-oxygen battery. In this article, we present a detailed overview of theoretical efforts to formulate design principles for identifying stable electrolytes and electrodes with the desired functionality and stability. We discuss design principles relating to electrolytes and the additional stability challenges that arise at the cathode-electrolyte interface. Based on a thermodynamic analysis, we discuss two important requirements for the cathode: the ability to nucleate the desired discharge product, Li[Formula: see text]O[Formula: see text], and the ability to selectively activate only this discharge product while suppressing lithium oxide, the undesired secondary discharge product. We propose preliminary guidelines for determining the chemical stability of the electrode and illustrate the challenge associated with electrode selection using the examples of carbon cathodes and transition metals. We believe that a synergistic design framework for identifying electrolyte-electrode formulations is needed to realize a practical Li-O[Formula: see text] battery.

The patient-centered medical home: an ethical analysis of principles and practice.

PubMed

Braddock, Clarence H; Snyder, Lois; Neubauer, Richard L; Fischer, Gary S

2013-01-01

The patient-centered medical home (PCMH), with its focus on patient-centered care, holds promise as a way to reinvigorate the primary care of patients and as a necessary component of health care reform. While its tenets have been the subject of review, the ethical dimensions of the PCMH have not been fully explored. Consideration of the ethical foundations for the core principles of the PCMH can and should be part of the debate concerning its merits. The PCMH can align with the principles of medical ethics and potentially strengthen the patient-physician relationship and aspects of health care that patients value. Patient choice and these ethical considerations are central and at least as important as the economic and practical arguments in support of the PCMH, if not more so. Further, the ethical principles that support key concepts of the PCMH have implications for the design and implementation of the PCMH. This paper explores the PCMH in light of core principles of ethics and professionalism, with an emphasis both on how the concept of the PCMH may reinforce core ethical principles of medical practice and on further implications of these principles.

Design principles for high efficiency small-grain polysilicon solar cells, with supporting experimental studies

NASA Technical Reports Server (NTRS)

Lindholm, F. A.; Neugroschel, A.; Sah, C. T.

1982-01-01

Design principles suggested here aim toward high conversion efficiency (greater than 15 percent) in polysilicon cells. The principles seek to decrease the liabilities of both intragranular and grain-boundary-surface defects. The advantages of a phosphorus atom concentration gradient in a thin (less than 50 microns) base of a p(+)/n(x)/n(+) drift-field solar cell, which produces favorable gradients in chemical potential, minority-carrier mobility and diffusivity, and recombination lifetime (via phosphorus gettering) are suggested. The degrading effects of grain boundaries are reduced by these three gradients and by substituting atoms (P, H, F or Li) for vacancies on the grain-boundary surface. From recent experiments comes support for the benefits of P diffusion down grain boundaries and, for quasi-grain-boundary-free and related structures. New analytic solutions for the n(x)-base include the effect of a power-law dependence between P concentration and lifetime. These provide an upper-bound estimate on the open circuit voltage. Finite-difference numerical solutions of the six Shockley equations furnish complete information about all solar-cell parameters and add insight concerning design.

Urban Space Innovation - “10+” Principles through Designing the New Image of the Existing Shopping Mall in Csepel, Hungary

NASA Astrophysics Data System (ADS)

Gyergyak, Janos

2017-10-01

The first part of the paper is about to introduce the principles of “placemaking” as an innovation and important tool of the cities in the 21st century. The process helps designers to transform the spaces of “nobody” to a community-based space for supporting the connection among humans. The second part of the paper shows the process of the used principles by the author for designing the new image of the existing shopping mall in Csepel, Hungary. This work was selected as one of the best design ideas for renewing the existing underutilized space.

Clinical trial design principles and endpoint definitions for transcatheter mitral valve repair and replacement: part 1: clinical trial design principles: A consensus document from the mitral valve academic research consortium.

PubMed

Stone, Gregg W; Vahanian, Alec S; Adams, David H; Abraham, William T; Borer, Jeffrey S; Bax, Jeroen J; Schofer, Joachim; Cutlip, Donald E; Krucoff, Mitchell W; Blackstone, Eugene H; Généreux, Philippe; Mack, Michael J; Siegel, Robert J; Grayburn, Paul A; Enriquez-Sarano, Maurice; Lancellotti, Patrizio; Filippatos, Gerasimos; Kappetein, Arie Pieter

2015-08-01

Mitral regurgitation (MR) is one of the most prevalent valve disorders and has numerous aetiologies, including primary (organic) MR, due to underlying degenerative/structural mitral valve (MV) pathology, and secondary (functional) MR, which is principally caused by global or regional left ventricular remodelling and/or severe left atrial dilation. Diagnosis and optimal management of MR requires integration of valve disease and heart failure specialists, MV cardiac surgeons, interventional cardiologists with expertise in structural heart disease, and imaging experts. The introduction of transcatheter MV therapies has highlighted the need for a consensus approach to pragmatic clinical trial design and uniform endpoint definitions to evaluate outcomes in patients with MR. The Mitral Valve Academic Research Consortium is a collaboration between leading academic research organizations and physician-scientists specializing in MV disease from the United States and Europe. Three in-person meetings were held in Virginia and New York during which 44 heart failure, valve, and imaging experts, MV surgeons and interventional cardiologists, clinical trial specialists and statisticians, and representatives from the U.S. Food and Drug Administration considered all aspects of MV pathophysiology, prognosis, and therapies, culminating in a 2-part document describing consensus recommendations for clinical trial design (Part 1) and endpoint definitions (Part 2) to guide evaluation of transcatheter and surgical therapies for MR. The adoption of these recommendations will afford robustness and consistency in the comparative effectiveness evaluation of new devices and approaches to treat MR. These principles may be useful for regulatory assessment of new transcatheter MV devices, as well as for monitoring local and regional outcomes to guide quality improvement initiatives. Published on behalf of the European Society of Cardiology. All rights reserved. © American College of Cardiology

Laser beam riding guided system principle and design research

NASA Astrophysics Data System (ADS)

Qu, Zhou; Jin, Yi; Xu, Zhou; Xing, Hao

2016-01-01

With the development of science and technology, precision-strike weapons has been considered to be important for winning victory in military field. Laser guidance is a major method to execute precision-strike in modern warfare. At present, the problems of primary stage of Laser guidance has been solved with endeavors of countries. Several technical aspects of laser-beam riding guided system have been mature, such as atmosphere penetration of laser beam, clutter inhibition on ground, laser irradiator, encoding and decoding of laser beam. Further, laser beam quality, equal output power and atmospheric transmission properties are qualified for warfare situation. Riding guidance instrument is a crucial element of Laser-beam riding guided system, and is also a vital element of airborne, vehicle-mounted and individual weapon. The optical system mainly consist of sighting module and laser-beam guided module. Photoelectric detector is the most important sensing device of seeker, and also the key to acquire the coordinate information of target space. Currently, in consideration of the 1.06 u m of wavelength applied in all the semi-active laser guided weapons systems, lithium drifting silicon photodiode which is sensitive to 1.06 u m of wavelength is used in photoelectric detector. Compared to Solid and gas laser, diode laser has many merits such as small volume, simple construction, light weight, long life, low lost and easy modulation. This article introduced the composition and operating principle of Laser-beam riding guided system based on 980 nm diode laser, and made a analysis of key technology; for instance, laser irradiator, modulating disk of component, laser zooming system. Through the use of laser diode, Laser-beam riding guided system is likely to have smaller shape and very light.

Satellite Test of the Equivalence Principle, Overview and Progress

NASA Technical Reports Server (NTRS)

Kolodziejczak, Jeffery

2006-01-01

An overview of STEP, the Satellite test of the Equivalence Principle will be presented. This space-based experiment will test the Universality of free fall and is designed to advance the present state of knowledge by over 5 orders of magnitude. The international STEP collaboration is pursuing a development plan to improve and verify the technology readiness of key systems. We will discuss recent advances with an emphasis on accelerometer fabrication and test. The transfer of critical technologies successfully demonstrated in flight by the Gravity Probe B mission will be described.

Design principles for high–pressure force fields: Aqueous TMAO solutions from ambient to kilobar pressures

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hölzl, Christoph; Horinek, Dominik, E-mail: dominik.horinek@ur.de; Kibies, Patrick

Accurate force fields are one of the major pillars on which successful molecular dynamics simulations of complex biomolecular processes rest. They have been optimized for ambient conditions, whereas high-pressure simulations become increasingly important in pressure perturbation studies, using pressure as an independent thermodynamic variable. Here, we explore the design of non-polarizable force fields tailored to work well in the realm of kilobar pressures – while avoiding complete reparameterization. Our key is to first compute the pressure-induced electronic and structural response of a solute by combining an integral equation approach to include pressure effects on solvent structure with a quantum-chemical treatmentmore » of the solute within the embedded cluster reference interaction site model (EC-RISM) framework. Next, the solute’s response to compression is taken into account by introducing pressure-dependence into selected parameters of a well-established force field. In our proof-of-principle study, the full machinery is applied to N,N,N-trimethylamine-N-oxide (TMAO) in water being a potent osmolyte that counteracts pressure denaturation. EC-RISM theory is shown to describe well the charge redistribution upon compression of TMAO(aq) to 10 kbar, which is then embodied in force field molecular dynamics by pressure-dependent partial charges. The performance of the high pressure force field is assessed by comparing to experimental and ab initio molecular dynamics data. Beyond its broad usefulness for designing non-polarizable force fields for extreme thermodynamic conditions, a good description of the pressure-response of solutions is highly recommended when constructing and validating polarizable force fields.« less

Design principles for high-pressure force fields: Aqueous TMAO solutions from ambient to kilobar pressures.

PubMed

Hölzl, Christoph; Kibies, Patrick; Imoto, Sho; Frach, Roland; Suladze, Saba; Winter, Roland; Marx, Dominik; Horinek, Dominik; Kast, Stefan M

2016-04-14

Accurate force fields are one of the major pillars on which successful molecular dynamics simulations of complex biomolecular processes rest. They have been optimized for ambient conditions, whereas high-pressure simulations become increasingly important in pressure perturbation studies, using pressure as an independent thermodynamic variable. Here, we explore the design of non-polarizable force fields tailored to work well in the realm of kilobar pressures--while avoiding complete reparameterization. Our key is to first compute the pressure-induced electronic and structural response of a solute by combining an integral equation approach to include pressure effects on solvent structure with a quantum-chemical treatment of the solute within the embedded cluster reference interaction site model (EC-RISM) framework. Next, the solute's response to compression is taken into account by introducing pressure-dependence into selected parameters of a well-established force field. In our proof-of-principle study, the full machinery is applied to N,N,N-trimethylamine-N-oxide (TMAO) in water being a potent osmolyte that counteracts pressure denaturation. EC-RISM theory is shown to describe well the charge redistribution upon compression of TMAO(aq) to 10 kbar, which is then embodied in force field molecular dynamics by pressure-dependent partial charges. The performance of the high pressure force field is assessed by comparing to experimental and ab initio molecular dynamics data. Beyond its broad usefulness for designing non-polarizable force fields for extreme thermodynamic conditions, a good description of the pressure-response of solutions is highly recommended when constructing and validating polarizable force fields.

41 CFR 102-76.55 - What sustainable development principles must Federal agencies apply to the siting, design, and...

Code of Federal Regulations, 2011 CFR

2011-01-01

... construction of new facilities, which include— (a) Optimizing site potential; (b) Minimizing non-renewable... development principles must Federal agencies apply to the siting, design, and construction of new facilities... Federal agencies apply to the siting, design, and construction of new facilities? In keeping with the...

41 CFR 102-76.55 - What sustainable development principles must Federal agencies apply to the siting, design, and...

Code of Federal Regulations, 2014 CFR

2014-01-01

... construction of new facilities, which include— (a) Optimizing site potential; (b) Minimizing non-renewable... development principles must Federal agencies apply to the siting, design, and construction of new facilities... Federal agencies apply to the siting, design, and construction of new facilities? In keeping with the...

41 CFR 102-76.55 - What sustainable development principles must Federal agencies apply to the siting, design, and...

Code of Federal Regulations, 2012 CFR

2012-01-01

... construction of new facilities, which include— (a) Optimizing site potential; (b) Minimizing non-renewable... development principles must Federal agencies apply to the siting, design, and construction of new facilities... Federal agencies apply to the siting, design, and construction of new facilities? In keeping with the...

41 CFR 102-76.55 - What sustainable development principles must Federal agencies apply to the siting, design, and...

Code of Federal Regulations, 2013 CFR

2013-07-01

... construction of new facilities, which include— (a) Optimizing site potential; (b) Minimizing non-renewable... development principles must Federal agencies apply to the siting, design, and construction of new facilities... Federal agencies apply to the siting, design, and construction of new facilities? In keeping with the...

The Collective Black and "Principles to Actions"

ERIC Educational Resources Information Center

Martin, Danny Bernard

2015-01-01

In this commentary, Danny Martin describes five key take-aways and two sets of questions that arose from his reading of "Principles to Actions: Ensuring Mathematics Success for All (National Council of Teachers of Mathematics [NCTM], 2014). Martin begins by noting that "Principles to Actions" is clearly a political document that…

Seven Foundational Principles of Population Health Policy.

PubMed

Bhattacharya, Dru; Bhatt, Jay

2017-10-01

In 2016, Keyes and Galea issued 9 foundational principles of population health science and invited further deliberations by specialists to advance the field. This article presents 7 foundational principles of population health policy whose intersection with health care, public health, preventive medicine, and now population health, presents unique challenges. These principles are in response to a number of overarching questions that have arisen in over a decade of the authors' collective practice in the public and private sectors, and having taught policy within programs of medicine, law, nursing, and public health at the graduate and executive levels. The principles address an audience of practitioners and policy makers, mindful of the pressing health care challenges of our time, including: rising health-related expenditures, an aging population, workforce shortages, health disparities, and a backdrop of inequities rooted in social determinants that have not been adequately translated into formal policies or practices among the key stakeholders in population health. These principles are meant to empower stakeholders-whether it is the planner or the practitioner, the decision maker or the dedicated caregiver-and inform the development of practical tools, research, and education.

Global ethics and principlism.

PubMed

Gordon, John-Stewart

2011-09-01

This article examines the special relation between common morality and particular moralities in the four-principles approach and its use for global ethics. It is argued that the special dialectical relation between common morality and particular moralities is the key to bridging the gap between ethical universalism and relativism. The four-principles approach is a good model for a global bioethics by virtue of its ability to mediate successfully between universal demands and cultural diversity. The principle of autonomy (i.e., the idea of individual informed consent), however, does need to be revised so as to make it compatible with alternatives such as family- or community-informed consent. The upshot is that the contribution of the four-principles approach to global ethics lies in the so-called dialectical process and its power to deal with cross-cultural issues against the background of universal demands by joining them together.

Is three the magic number? The role of ergonomic principles in cross country comprehension of road traffic signs.

PubMed

Jamson, Samantha; Mrozek, Marco

2017-07-01

Road sign comprehension plays an important part in road safety management, particularly for those drivers who are travelling in an unfamiliar country. Previous research has established that comprehension can be improved if signs are designed to adhere to ergonomic principles. However, it may be difficult for sign designers to incorporate all the principles into a single sign and may thus have to make a judgement as to the most effective ones. This study surveyed drivers in three countries to ascertain their understanding of a range of road signs, each of which conformed in varying degrees and combinations to the ergonomic principles. We found that using three of the principles was the most effective and that the most important one was that relating to standardisation; the colours and shapes used were key to comprehension. Other concepts which related to physical and spatial characteristics were less important, whilst conceptual compatibility did not aid comprehension at all. Practitioner Summary: This study explores how road sign comprehension can be improved using ergonomic principles, with particular reference to cross-border drivers. It was found that comprehension can be improved significantly if standardisation is adhered to and if at least three principles are used.

Design for reliability: NASA reliability preferred practices for design and test

NASA Technical Reports Server (NTRS)

Lalli, Vincent R.

1994-01-01

This tutorial summarizes reliability experience from both NASA and industry and reflects engineering practices that support current and future civil space programs. These practices were collected from various NASA field centers and were reviewed by a committee of senior technical representatives from the participating centers (members are listed at the end). The material for this tutorial was taken from the publication issued by the NASA Reliability and Maintainability Steering Committee (NASA Reliability Preferred Practices for Design and Test. NASA TM-4322, 1991). Reliability must be an integral part of the systems engineering process. Although both disciplines must be weighed equally with other technical and programmatic demands, the application of sound reliability principles will be the key to the effectiveness and affordability of America's space program. Our space programs have shown that reliability efforts must focus on the design characteristics that affect the frequency of failure. Herein, we emphasize that these identified design characteristics must be controlled by applying conservative engineering principles.

Moral principles or consumer preferences? Alternative framings of the trolley problem.

PubMed

Rai, Tage S; Holyoak, Keith J

2010-03-01

We created paired moral dilemmas with minimal contrasts in wording, a research strategy that has been advocated as a way to empirically establish principles operative in a domain-specific moral psychology. However, the candidate "principles" we tested were not derived from work in moral philosophy, but rather from work in the areas of consumer choice and risk perception. Participants were paradoxically less likely to choose an action that sacrifices one life to save others when they were asked to provide more reasons for doing so (Experiment 1), and their willingness to sacrifice lives depended not only on how many lives would be saved, but on the number of lives at risk (Experiment 2). The latter effect was also found in a within-subjects design (Experiment 3). These findings suggest caution in the use of artificial dilemmas as a key testbed for revealing principled bases for moral judgment. Copyright © 2009 Cognitive Science Society, Inc.

A game plan: Gamification design principles in mHealth applications for chronic disease management.

PubMed

Miller, Aaron S; Cafazzo, Joseph A; Seto, Emily

2016-06-01

Effective chronic disease management is essential to improve positive health outcomes, and incentive strategies are useful in promoting self-care with longevity. Gamification, applied with mHealth (mobile health) applications, has the potential to better facilitate patient self-management. This review article addresses a knowledge gap around the effective use of gamification design principles, or mechanics, in developing mHealth applications. Badges, leaderboards, points and levels, challenges and quests, social engagement loops, and onboarding are mechanics that comprise gamification. These mechanics are defined and explained from a design and development perspective. Health and fitness applications with gamification mechanics include: bant which uses points, levels, and social engagement, mySugr which uses challenges and quests, RunKeeper which uses leaderboards as well as social engagement loops and onboarding, Fitocracy which uses badges, and Mango Health, which uses points and levels. Specific design considerations are explored, an example of the efficacy of a gamified mHealth implementation in facilitating improved self-management is provided, limitations to this work are discussed, a link between the principles of gaming and gamification in health and wellness technologies is provided, and suggestions for future work are made. We conclude that gamification could be leveraged in developing applications with the potential to better facilitate self-management in persons with chronic conditions. © The Author(s) 2014.

A simulation-based curriculum to introduce key teamwork principles to entering medical students.

PubMed

Banerjee, Arna; Slagle, Jason M; Mercaldo, Nathaniel D; Booker, Ray; Miller, Anne; France, Daniel J; Rawn, Lisa; Weinger, Matthew B

2016-11-16

Failures of teamwork and interpersonal communication have been cited as a major patient safety issue. Although healthcare is increasingly being provided in interdisciplinary teams, medical school curricula have traditionally not explicitly included the specific knowledge, skills, attitudes, and behaviors required to function effectively as part of such teams. As part of a new "Foundations" core course for beginning medical students that provided a two-week introduction to the most important themes in modern healthcare, a multidisciplinary team, in collaboration with the Center for Experiential Learning and Assessment, was asked to create an experiential introduction to teamwork and interpersonal communication. We designed and implemented a novel, all-day course to teach second-week medical students basic teamwork and interpersonal principles and skills using immersive simulation methods. Students' anonymous comprehensive course evaluations were collected at the end of the day. Through four years of iterative refinement based on students' course evaluations, faculty reflection, and debriefing, the course changed and matured. Four hundred twenty evaluations were collected. Course evaluations were positive with almost all questions having means and medians greater than 5 out of 7 across all 4 years. Sequential year comparisons were of greatest interest for examining the effects of year-to-year curricular improvements. Differences were not detected among any of the course evaluation questions between 2007 and 2008 except that more students in 2008 felt that the course further developed their "Decision Making Abilities" (OR 1.69, 95% CI 1.07-2.67). With extensive changes to the syllabus and debriefer selection/assignment, concomitant improvements were observed in these aspects between 2008 and 2009 (OR = 2.11, 95% CI: 1.28-3.50). Substantive improvements in specific exercises also yielded significant improvements in the evaluations of those exercises. This

Impact of first-principles properties of deuterium–tritium on inertial confinement fusion target designs

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hu, S. X., E-mail: shu@lle.rochester.edu; Goncharov, V. N.; Boehly, T. R.

2015-05-15

A comprehensive knowledge of the properties of high-energy-density plasmas is crucial to understanding and designing low-adiabat, inertial confinement fusion (ICF) implosions through hydrodynamic simulations. Warm-dense-matter (WDM) conditions are routinely accessed by low-adiabat ICF implosions, in which strong coupling and electron degeneracy often play an important role in determining the properties of warm dense plasmas. The WDM properties of deuterium–tritium (DT) mixtures and ablator materials, such as the equation of state, thermal conductivity, opacity, and stopping power, were usually estimated by models in hydro-codes used for ICF simulations. In these models, many-body and quantum effects were only approximately taken into accountmore » in the WMD regime. Moreover, the self-consistency among these models was often missing. To examine the accuracy of these models, we have systematically calculated the static, transport, and optical properties of warm dense DT plasmas, using first-principles (FP) methods over a wide range of densities and temperatures that cover the ICF “path” to ignition. These FP methods include the path-integral Monte Carlo (PIMC) and quantum-molecular dynamics (QMD) simulations, which treat electrons with many-body quantum theory. The first-principles equation-of-state table, thermal conductivities (κ{sub QMD}), and first principles opacity table of DT have been self-consistently derived from the combined PIMC and QMD calculations. They have been compared with the typical models, and their effects to ICF simulations have been separately examined in previous publications. In this paper, we focus on their combined effects to ICF implosions through hydro-simulations using these FP-based properties of DT in comparison with the usual model simulations. We found that the predictions of ICF neutron yield could change by up to a factor of ∼2.5; the lower the adiabat of DT capsules, the more variations in hydro-simulations. The FP

Impact of first-principles properties of deuterium–tritium on inertial confinement fusion target designs

DOE PAGES

Hu, S. X.; Goncharov, V. N.; Boehly, T. R.; ...

2015-04-20

In this study, a comprehensive knowledge of the properties of high-energy-density plasmas is crucial to understanding and designing low-adiabat, inertial confinement fusion (ICF) implosions through hydrodynamic simulations. Warm-dense-matter (WDM) conditions are routinely accessed by low-adiabat ICF implosions, in which strong coupling and electron degeneracy often play an important role in determining the properties of warm dense plasmas. The WDM properties of deuterium–tritium (DT) mixtures and ablator materials, such as the equation of state, thermal conductivity, opacity, and stopping power, were usually estimated by models in hydro-codes used for ICF simulations. In these models, many-body and quantum effects were only approximatelymore » taken into account in the WMD regime. Moreover, the self-consistency among these models was often missing. To examine the accuracy of these models, we have systematically calculated the static, transport, and optical properties of warm dense DT plasmas, using first-principles (FP) methods over a wide range of densities and temperatures that cover the ICF “path” to ignition. These FP methods include the path-integral Monte Carlo (PIMC) and quantum-molecular dynamics (QMD) simulations, which treat electrons with many-body quantum theory. The first-principles equation-of-state table, thermal conductivities (K QMD), and first principles opacity table of DT have been self-consistently derived from the combined PIMC and QMD calculations. They have been compared with the typical models, and their effects to ICF simulations have been separately examined in previous publications. In this paper, we focus on their combined effects to ICF implosions through hydro-simulations using these FP-based properties of DT in comparison with the usual model simulations. We found that the predictions of ICF neutron yield could change by up to a factor of –2.5; the lower the adiabat of DT capsules, the more variations in hydro

Examining key design decisions involved in developing a serious game for child sexual abuse prevention.

PubMed

Stieler-Hunt, Colleen; Jones, Christian M; Rolfe, Ben; Pozzebon, Kay

2014-01-01

This paper presents a case study of the key decisions made in the design of Orbit, a child sexual abuse prevention computer game targeted at school students between 8 and 10 years of age. Key decisions include providing supported delivery for the target age group, featuring adults in the program, not over-sanitizing game content, having a focus on building healthy self-concept of players, making the game engaging and relatable for all players and evaluating the program. This case study has implications for the design of Serious Games more generally, including that research should underpin game design decisions, game designers should consider ways of bridging the game to real life, the learning that arises from the game should go beyond rote-learning, designers should consider how the player can make the game-world their own and comprehensive evaluations of Serious Games should be undertaken.

Examining key design decisions involved in developing a serious game for child sexual abuse prevention

PubMed Central

Stieler-Hunt, Colleen; Jones, Christian M.; Rolfe, Ben; Pozzebon, Kay

2014-01-01

This paper presents a case study of the key decisions made in the design of Orbit, a child sexual abuse prevention computer game targeted at school students between 8 and 10 years of age. Key decisions include providing supported delivery for the target age group, featuring adults in the program, not over-sanitizing game content, having a focus on building healthy self-concept of players, making the game engaging and relatable for all players and evaluating the program. This case study has implications for the design of Serious Games more generally, including that research should underpin game design decisions, game designers should consider ways of bridging the game to real life, the learning that arises from the game should go beyond rote-learning, designers should consider how the player can make the game-world their own and comprehensive evaluations of Serious Games should be undertaken. PMID:24550880

Design Principles for the Atomic and Electronic Structure of Halide Perovskite Photovoltaic Materials: Insights from Computation.

PubMed

Berger, Robert F

2018-02-09

In the current decade, perovskite solar cell research has emerged as a remarkably active, promising, and rapidly developing field. Alongside breakthroughs in synthesis and device engineering, halide perovskite photovoltaic materials have been the subject of predictive and explanatory computational work. In this Minireview, we focus on a subset of this computation: density functional theory (DFT)-based work highlighting the ways in which the electronic structure and band gap of this class of materials can be tuned via changes in atomic structure. We distill this body of computational literature into a set of underlying design principles for the band gap engineering of these materials, and rationalize these principles from the viewpoint of band-edge orbital character. We hope that this perspective provides guidance and insight toward the rational design and continued improvement of perovskite photovoltaics. © 2018 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

Designing a 'neotissue' using the principles of biology, chemistry and engineering.

PubMed

Nannaparaju, Madhusudhan; Oragui, Emeka; Khan, Wasim S

2012-01-01

The traditional methods of treating musculoskeletal injuries and disorders are not completely effective and have several limitations. Tissue engineering involves using the principles of biology, chemistry and engineering to design a 'neotissue' that augments a malfunctioning in vivo tissue. The main requirements for functional engineered tissue include reparative cellular components that proliferate on a scaffold grown within a bioreactor that provides specific biochemical and physical signals to regulate cell differentiation and tissue assembly. In this review we provide an overview of the biology of common musculoskeletal tissue and discuss their common pathologies. We also describe the commonly used stem cells, scaffolds and bioreactors and evaluate their role in issue engineering.

Melding Service Learning and Leadership Skills Development: Keys to Effective Course Design

ERIC Educational Resources Information Center

Lester, Scott W.

2015-01-01

The author presents keys to designing a class that successfully melds service learning and student leadership development. These prescriptions are based on the lessons learned over 8 years of teaching a class titled "Community Leadership." This class emphasizes experiential learning and revolves around service learning projects. The…

Design principles and realization of electro-optical circuit boards

NASA Astrophysics Data System (ADS)

Betschon, Felix; Lamprecht, Tobias; Halter, Markus; Beyer, Stefan; Peterson, Harry

2013-02-01

The manufacturing of electro-optical circuit boards (EOCB) is based to a large extent on established technologies. First products with embedded polymer waveguides are currently produced in series. The range of applications within the sensor and data communication markets is growing with the increasing maturity level. EOCBs require design flows, processes and techniques similar to existing printed circuit board (PCB) manufacturing and appropriate for optical signal transmission. A key aspect is the precise and automated assembly of active and passive optical components to the optical waveguides which has to be supported by the technology. The design flow is described after a short introduction into the build-up of EOCBs and the motivation for the usage of this technology within the different application fields. Basis for the design of EOCBs are the required optical signal transmission properties. Thereafter, the devices for the electro-optical conversion are chosen and the optical coupling approach is defined. Then, the planar optical elements (waveguides, splitters, couplers) are designed and simulated. This phase already requires co-design of the optical and electrical domain using novel design flows. The actual integration of an optical system into a PCB is shown in the last part. The optical layer is thereby laminated to the purely electrical PCB using a conventional PCB-lamination process to form the EOCB. The precise alignment of the various electrical and optical layers is thereby essential. Electrical vias are then generated, penetrating also the optical layer, to connect the individual electrical layers. Finally, the board has to be tested electrically and optically.

Core principles of evolutionary medicine

PubMed Central

Grunspan, Daniel Z; Nesse, Randolph M; Barnes, M Elizabeth; Brownell, Sara E

2018-01-01

Abstract Background and objectives Evolutionary medicine is a rapidly growing field that uses the principles of evolutionary biology to better understand, prevent and treat disease, and that uses studies of disease to advance basic knowledge in evolutionary biology. Over-arching principles of evolutionary medicine have been described in publications, but our study is the first to systematically elicit core principles from a diverse panel of experts in evolutionary medicine. These principles should be useful to advance recent recommendations made by The Association of American Medical Colleges and the Howard Hughes Medical Institute to make evolutionary thinking a core competency for pre-medical education. Methodology The Delphi method was used to elicit and validate a list of core principles for evolutionary medicine. The study included four surveys administered in sequence to 56 expert panelists. The initial open-ended survey created a list of possible core principles; the three subsequent surveys winnowed the list and assessed the accuracy and importance of each principle. Results Fourteen core principles elicited at least 80% of the panelists to agree or strongly agree that they were important core principles for evolutionary medicine. These principles over-lapped with concepts discussed in other articles discussing key concepts in evolutionary medicine. Conclusions and implications This set of core principles will be helpful for researchers and instructors in evolutionary medicine. We recommend that evolutionary medicine instructors use the list of core principles to construct learning goals. Evolutionary medicine is a young field, so this list of core principles will likely change as the field develops further. PMID:29493660

Chemical Frustration. A Design Principle for the Discovery of New Complex Alloy and Intermetallic Phases, Final Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Fredrickson, Daniel C

2015-06-23

Final technical report for "Chemical Frustration: A Design Principle for the Discovery of New Complex Alloy and Intermetallic Phases" funded by the Office of Science through the Materials Chemistry Program of the Office of Basic Energy Sciences.

Basic principles for rational design of high-performance nanostructured silicon-based thermoelectric materials.

PubMed

Yang, Chun Cheng; Li, Sean

2011-12-23

Recently, nanostructured silicon-based thermoelectric materials have drawn great attention owing to their excellent thermoelectric performance in the temperature range around 450 °C, which is eminently applicable for concentrated solar thermal technology. In this work, a unified nanothermodynamic model is developed to investigate the predominant factors that determine the lattice thermal conductivity of nanocrystalline, nanoporous, and nanostructured bulk Si. A systematic study shows that the thermoelectric performance of these materials can be substantially enhanced by the following three basic principles: 1) artificial manipulation and optimization of roughness with surface/interface patterning/engineering; 2) grain-size reduction with innovative fabrication techniques in a controllable fashion; and 3) optimization of material parameters, such as bulk solid-vapor transition entropy, bulk vibrational entropy, dimensionality, and porosity, to decrease the lattice thermal conductivity. These principles may be used to rationally design novel nanostructured Si-based thermoelectric materials for renewable energy applications. Copyright © 2011 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Value of Earth Observations: Key principles and techniques of socioeconomic benefits analysis (Invited)

NASA Astrophysics Data System (ADS)

Friedl, L.; Macauley, M.; Bernknopf, R.

2013-12-01

Internationally, multiple organizations are placing greater emphasis on the societal benefits that governments, businesses, and NGOs can derive from applications of Earth-observing satellite observations, research, and models. A growing set of qualitative, anecdotal examples on the uses of Earth observations across a range of sectors can be complemented by the quantitative substantiation of the socioeconomic benefits. In turn, the expanding breadth of environmental data available and the awareness of their beneficial applications to inform decisions can support new products and services by companies, agencies, and civil society. There are, however, significant efforts needed to bridge the Earth sciences and social and economic sciences fields to build capacity, develop case studies, and refine analytic techniques in quantifying socioeconomic benefits from the use of Earth observations. Some government programs, such as the NASA Earth Science Division's Applied Sciences Program have initiated activities in recent years to quantify the socioeconomic benefits from applications of Earth observations research, and to develop multidisciplinary models for organizations' decision-making activities. A community of practice has conducted workshops, developed impact analysis reports, published a book, developed a primer, and pursued other activities to advance analytic methodologies and build capacity. This paper will present an overview of measuring socioeconomic impacts of Earth observations and how the measures can be translated into a value of Earth observation information. It will address key terms, techniques, principles and applications of socioeconomic impact analyses. It will also discuss activities to pursue a research agenda on analytic techniques, develop a body of knowledge, and promote broader skills and capabilities.

DNA based random key generation and management for OTP encryption.

PubMed

Zhang, Yunpeng; Liu, Xin; Sun, Manhui

2017-09-01

One-time pad (OTP) is a principle of key generation applied to the stream ciphering method which offers total privacy. The OTP encryption scheme has proved to be unbreakable in theory, but difficult to realize in practical applications. Because OTP encryption specially requires the absolute randomness of the key, its development has suffered from dense constraints. DNA cryptography is a new and promising technology in the field of information security. DNA chromosomes storing capabilities can be used as one-time pad structures with pseudo-random number generation and indexing in order to encrypt the plaintext messages. In this paper, we present a feasible solution to the OTP symmetric key generation and transmission problem with DNA at the molecular level. Through recombinant DNA technology, by using only sender-receiver known restriction enzymes to combine the secure key represented by DNA sequence and the T vector, we generate the DNA bio-hiding secure key and then place the recombinant plasmid in implanted bacteria for secure key transmission. The designed bio experiments and simulation results show that the security of the transmission of the key is further improved and the environmental requirements of key transmission are reduced. Analysis has demonstrated that the proposed DNA-based random key generation and management solutions are marked by high security and usability. Published by Elsevier B.V.

Design Principles for Computer-Assisted Instruction in Histology Education: An Exploratory Study

ERIC Educational Resources Information Center

Deniz, Hasan; Cakir, Hasan

2006-01-01

The purpose of this paper is to describe the development process and the key components of a computer-assisted histology material. Computer-assisted histology material is designed to supplement traditional histology education in a large Midwestern university. Usability information of the computer-assisted instruction (CAI) material was obtained…

Interactive simulations for quantum key distribution

NASA Astrophysics Data System (ADS)

Kohnle, Antje; Rizzoli, Aluna

2017-05-01

Secure communication protocols are becoming increasingly important, e.g. for internet-based communication. Quantum key distribution (QKD) allows two parties, commonly called Alice and Bob, to generate a secret sequence of 0s and 1s called a key that is only known to themselves. Classically, Alice and Bob could never be certain that their communication was not compromised by a malicious eavesdropper. Quantum mechanics however makes secure communication possible. The fundamental principle of quantum mechanics that taking a measurement perturbs the system (unless the measurement is compatible with the quantum state) also applies to an eavesdropper. Using appropriate protocols to create the key, Alice and Bob can detect the presence of an eavesdropper by errors in their measurements. As part of the QuVis Quantum Mechanics Visualisation Project, we have developed a suite of four interactive simulations that demonstrate the basic principles of three different QKD protocols. The simulations use either polarised photons or spin 1/2 particles as physical realisations. The simulations and accompanying activities are freely available for use online or download, and run on a wide range of devices including tablets and PCs. Evaluation with students over three years was used to refine the simulations and activities. Preliminary studies show that the refined simulations and activities help students learn the basic principles of QKD at both the introductory and advanced undergraduate levels.

Design of integrated laser initiator

NASA Astrophysics Data System (ADS)

Cao, Chunqiang; He, Aifeng; Jing, Bo; Ma, Yue

2018-03-01

This paper analyzes the design principle of integrated laser detonator, introduces the design method of integrated laser Detonators. Based on the integrated laser detonator, structure, laser energy -exchange device, circuit design and the energetic material properties and the charge parameters, developed a high level of integration Antistatic ability Small size of the integrated laser prototype Detonator. The laser detonator prototype antistatic ability of 25 kV. The research of this paper can solve the key design of laser detonator miniaturization and integration of weapons and equipment, satisfy the electromagnetic safety and micro weapons development of explosive demand.

The frequency hopping pattern design for random hopping frequency signal based on stationary phase principle

NASA Astrophysics Data System (ADS)

Liao, Zhikun; Lu, Dawei; Hu, Jiemin; Zhang, Jun

2018-04-01

For the random hopping frequency signal, the modulated frequencies are randomly distributed over given bandwidth. The randomness of modulated frequency not only improves the electronic counter countermeasure capability for radar systems, but also determines its performance of range compression. In this paper, the range ambiguity function of RHF signal is firstly derived. Then, a design method of frequency hopping pattern based on stationary phase principle to improve the peak to side-lobe ratio is proposed. Finally, the simulated experiments show a good effectiveness of the presented design method.

Principles of Sociology in Systems Engineering

NASA Technical Reports Server (NTRS)

Watson, Michael D.; Andrews, James G.; Larsen, Jordan A.

2017-01-01

Systems engineering involves both the integration of the system and the integration of the disciplines which develop and operate the system. Integrating the disciplines is a sociological effort to bring together different groups, often with different terminology, to achieve a common goal, the system. The focus for the systems engineer is information flow through the organization, between the disciplines, to ensure the system is developed and operated with all relevant information informing system decisions. Robert K. Merton studied the sociological principles of the sciences and the sociological principles he developed apply to systems engineering. Concepts such as specification of ignorance, common terminology, opportunity structures, role-sets, and the reclama (reconsideration) process are all important sociological approaches that should be employed by the systems engineer. In bringing the disciplines together, the systems engineer must also be wary of social ambivalence, social anomie, social dysfunction, insider-outsider behavior, unintended consequences, and the self-fulfilling prophecy. These sociological principles provide the systems engineer with key approaches to manage the information flow through the organization as the disciplines are integrated and share their information. This also helps identify key sociological barriers to information flow through the organization. This paper will discuss this theoretical basis for the application of sociological principles to systems engineering.

Branching angles of pyramidal cell dendrites follow common geometrical design principles in different cortical areas.

PubMed

Bielza, Concha; Benavides-Piccione, Ruth; López-Cruz, Pedro; Larrañaga, Pedro; DeFelipe, Javier

2014-08-01

Unraveling pyramidal cell structure is crucial to understanding cortical circuit computations. Although it is well known that pyramidal cell branching structure differs in the various cortical areas, the principles that determine the geometric shapes of these cells are not fully understood. Here we analyzed and modeled with a von Mises distribution the branching angles in 3D reconstructed basal dendritic arbors of hundreds of intracellularly injected cortical pyramidal cells in seven different cortical regions of the frontal, parietal, and occipital cortex of the mouse. We found that, despite the differences in the structure of the pyramidal cells in these distinct functional and cytoarchitectonic cortical areas, there are common design principles that govern the geometry of dendritic branching angles of pyramidal cells in all cortical areas.

Branching angles of pyramidal cell dendrites follow common geometrical design principles in different cortical areas

PubMed Central

Bielza, Concha; Benavides-Piccione, Ruth; López-Cruz, Pedro; Larrañaga, Pedro; DeFelipe, Javier

2014-01-01

Unraveling pyramidal cell structure is crucial to understanding cortical circuit computations. Although it is well known that pyramidal cell branching structure differs in the various cortical areas, the principles that determine the geometric shapes of these cells are not fully understood. Here we analyzed and modeled with a von Mises distribution the branching angles in 3D reconstructed basal dendritic arbors of hundreds of intracellularly injected cortical pyramidal cells in seven different cortical regions of the frontal, parietal, and occipital cortex of the mouse. We found that, despite the differences in the structure of the pyramidal cells in these distinct functional and cytoarchitectonic cortical areas, there are common design principles that govern the geometry of dendritic branching angles of pyramidal cells in all cortical areas. PMID:25081193

Guided-mode resonant filters and reflectors: Principles, design, and fabrication

NASA Astrophysics Data System (ADS)

Niraula, Manoj

In this dissertation, we overview the operational principles of these resonant periodic structures, discuss the methods of their design and fabrication, and propose and demonstrate novel functionalities for spatial and spectral filtering, and unpolarized wideband reflection. Fashioned with materially sparse gratings, these optical devices are easy to fabricate and integration friendly compared to their traditional multi-layer counterparts making their research and development critical for practical applications. We study, theoretically, modal properties and parametric dependence of resonant periodic bandpass filters operating in the mid- and near-infrared spectral domains. We investigate three different device architectures consisting of single, double, and triple layers based on all-transparent dielectric and semiconductor thin films. We present three modal coupling configurations forming complex mixtures of two or three distinct leaky modes coupling at different evanescent diffraction orders. Our modal analysis demonstrates key attributes of subwavelength periodic thin-film structures in multiple-modal blending to achieve desired transmission spectra. We provide the first experimental demonstration of high-efficiency and narrow-linewidth resonant bandpass filter applying a single patterned silicon layer on a quartz substrate. Its performance corresponds to bandpass filters requiring 15 traditional Si/SiO2 thin-film layers. The feasibility of sparse narrowband, high-efficiency bandpass filters with extremely wide, flat, and low sidebands is thereby demonstrated. The proposed technology is integration-friendly and opens doors for further development in various disciplines and spectral regions where thin-film solutions are traditionally applied. We demonstrate concurrent spatial and spectral filtering as a new outstanding attribute of resonant periodic devices. This functionality is enabled by a unique, near-complete, reflection state that is discrete in both

Principle and design of small-sized and high-definition x-ray machine

NASA Astrophysics Data System (ADS)

Zhao, Anqing

2010-10-01

The paper discusses the circuit design and working principles of VMOS PWM type 75KV10mA high frequency X-ray machine. The system mainly consists of silicon controlled rectifier, VMOS tube PWM type high-frequency and highvoltage inverter circuit, filament inverter circuit, high-voltage rectifier filter circuit and as X-ray tube. The working process can be carried out under the control of a single-chip microcomputer. Due to the small size and high resolution in imaging, the X-ray machine is mostly adopted for emergent medical diagnosis and specific circumstances where nondestructive tests are conducted.

Human Factors Principles in Information Dashboard Design

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hugo, Jacques V.; St. Germain, Shawn

strategic modernization program at a nuclear power plant where legacy systems are upgraded to advanced digital technologies through a systematic process that links human factors principles to the systems engineering process. This approach will help to create an integrated control room architecture beyond what is possible for individual subsystem upgrades alone. In addition, several human factors design and evaluation methods were used to develop the end-state concept, including interactive sessions with operators in INL’s Human System Simulation Laboratory, three-dimensional modeling to visualize control board changes.« less

Design principles of nuclear receptor signaling: how complex networking improves signal transduction

PubMed Central

Kolodkin, Alexey N; Bruggeman, Frank J; Plant, Nick; Moné, Martijn J; Bakker, Barbara M; Campbell, Moray J; van Leeuwen, Johannes P T M; Carlberg, Carsten; Snoep, Jacky L; Westerhoff, Hans V

2010-01-01

The topology of nuclear receptor (NR) signaling is captured in a systems biological graphical notation. This enables us to identify a number of ‘design' aspects of the topology of these networks that might appear unnecessarily complex or even functionally paradoxical. In realistic kinetic models of increasing complexity, calculations show how these features correspond to potentially important design principles, e.g.: (i) cytosolic ‘nuclear' receptor may shuttle signal molecules to the nucleus, (ii) the active export of NRs may ensure that there is sufficient receptor protein to capture ligand at the cytoplasmic membrane, (iii) a three conveyor belts design dissipating GTP-free energy, greatly aids response, (iv) the active export of importins may prevent sequestration of NRs by importins in the nucleus and (v) the unspecific nature of the nuclear pore may ensure signal-flux robustness. In addition, the models developed are suitable for implementation in specific cases of NR-mediated signaling, to predict individual receptor functions and differential sensitivity toward physiological and pharmacological ligands. PMID:21179018

Using the Music Industry To Teach Economic Principles.

ERIC Educational Resources Information Center

Stamm, K. Brad

The key purpose of this paper is to provide economics and business professors, particularly those teaching principles courses, with concrete examples of economic theory applied to the music industry. A second objective is to further the interest in economic theory among business majors and expose non-majors to economic principles via real world…

Key influences in the design and implementation of mental health information systems in Ghana and South Africa.

PubMed

Ahuja, S; Mirzoev, T; Lund, C; Ofori-Atta, A; Skeen, S; Kufuor, A

2016-01-01

Strengthening of mental health information systems (MHIS) is essential to monitor and evaluate mental health services in low and middle-income countries. While research exists assessing wider health management information systems, there is limited published evidence exploring the design and implementation of MHIS in these settings. This paper aims to identify and assess the key factors affecting the design and implementation of MHIS, as perceived by the key stakeholders in Ghana and South Africa. We report findings from the Mental Health and Poverty Project, a 5-year research programme implemented within four African countries. The MHIS strengthening in South Africa and Ghana included two related components: intervention and research. The intervention component aimed to strengthen MHIS in the two countries, and the research component aimed to document interventions in each country, including the key influences. Data were collected using semi structured interviews with key stakeholders and reviews of key documents and secondary data from the improved MHIS. We analyzed the qualitative data using a framework approach. Key components of the MHIS intervention involved the introduction of a redesigned patient registration form, entry into computers for analysis every 2 months by clinical managerial staff, and utilization of data in hospital management meetings in three psychiatric hospitals in Ghana; and the introduction of a new set of mental health indicators and related forms and tally sheets at primary care clinics and district hospitals in five districts in the KwaZulu-Natal and Northern Cape provinces in South Africa. Overall, the key stakeholders perceived the MHIS strengthening as an effective intervention in both countries with an enhanced set of indicators in South Africa and introduction of a computerized system in Ghana. Influences on the design and implementation of MHIS interventions in Ghana and South Africa relate to resources, working approaches

To Design and Evaluate a 12th Grade Course in the Principles of Economics; Final Report.

ERIC Educational Resources Information Center

Wiggins, Suzanne E.; Sperling, John G.

Reported is the design, development, and evaluation of a one-semester course on the principles of economics for twelfth grade students. The course is intended to develop students' capacity for economic reasoning through economic theory and empirical research. To do this, teaching materials and innovative techniques for teacher training were…

Key aspects of cost effective collector and solar field design

NASA Astrophysics Data System (ADS)

von Reeken, Finn; Nicodemo, Dario; Keck, Thomas; Weinrebe, Gerhard; Balz, Markus

2016-05-01

A study has been performed where different key parameters influencing solar field cost are varied. By using levelised cost of energy as figure of merit it is shown that parameters like GoToStow wind speed, heliostat stiffness or tower height should be adapted to respective site conditions from an economical point of view. The benchmark site Redstone (Northern Cape Province, South Africa) has been compared to an alternate site close to Phoenix (AZ, USA) regarding site conditions and their effect on cost-effective collector and solar field design.

Cross-hierarchy systems principles.

PubMed

Goentoro, Lea

2017-02-01

One driving motivation of systems biology is the search for general principles that govern the design of biological systems. But questions often arise as to what kind of general principles biology could have. Concepts from engineering such as robustness and modularity are indeed becoming a regular way of describing biological systems. Another source of potential general principles is the emerging similarities found in processes across biological hierarchies. In this piece, I describe several emerging cross-hierarchy similarities. Identification of more cross-hierarchy principles, and understanding the implications these convergence have on the construction of biological systems, I believe, present exciting challenges for systems biology in the decades to come.

Principles of engineering design

PubMed Central

Penny, R. K.

1970-01-01

The paper sets out procedures used in engineering design by listing the various steps in a sequential pattern. This pattern is not universally applicable and the variants on it depend on the type of problem involved and the information available. Of critical importance is the way in which models—physical or mathematical—can be constructed and depending on these, three design methods are described. These types are illustrated by reference to a number of medical aids which have been designed. ImagesFig. 3 PMID:5476130

Dynamics and design principles of a basic regulatory architecture controlling metabolic pathways.

PubMed

Chin, Chen-Shan; Chubukov, Victor; Jolly, Emmitt R; DeRisi, Joe; Li, Hao

2008-06-17

The dynamic features of a genetic network's response to environmental fluctuations represent essential functional specifications and thus may constrain the possible choices of network architecture and kinetic parameters. To explore the connection between dynamics and network design, we have analyzed a general regulatory architecture that is commonly found in many metabolic pathways. Such architecture is characterized by a dual control mechanism, with end product feedback inhibition and transcriptional regulation mediated by an intermediate metabolite. As a case study, we measured with high temporal resolution the induction profiles of the enzymes in the leucine biosynthetic pathway in response to leucine depletion, using an automated system for monitoring protein expression levels in single cells. All the genes in the pathway are known to be coregulated by the same transcription factors, but we observed drastically different dynamic responses for enzymes upstream and immediately downstream of the key control point-the intermediate metabolite alpha-isopropylmalate (alphaIPM), which couples metabolic activity to transcriptional regulation. Analysis based on genetic perturbations suggests that the observed dynamics are due to differential regulation by the leucine branch-specific transcription factor Leu3, and that the downstream enzymes are strictly controlled and highly expressed only when alphaIPM is available. These observations allow us to build a simplified mathematical model that accounts for the observed dynamics and can correctly predict the pathway's response to new perturbations. Our model also suggests that transient dynamics and steady state can be separately tuned and that the high induction levels of the downstream enzymes are necessary for fast leucine recovery. It is likely that principles emerging from this work can reveal how gene regulation has evolved to optimize performance in other metabolic pathways with similar architecture.

On Robust Key Agreement Based on Public Key Authentication

NASA Astrophysics Data System (ADS)

Hao, Feng

We describe two new attacks on the HMQV protocol. The first attack raises a serious question on the basic definition of "authentication" in HMQV, while the second attack is generally applicable to many other protocols. In addition, we present a new authenticated key agreement protocol called YAK. Our approach is to depend on well-established techniques such as Schnorr's signature. Among all the related protocols, YAK appears to be the simplest so far. We believe simplicity is an important engineering principle.

Using in-cell SHAPE-Seq and simulations to probe structure–function design principles of RNA transcriptional regulators

PubMed Central

Takahashi, Melissa K.; Watters, Kyle E.; Gasper, Paul M.; Abbott, Timothy R.; Carlson, Paul D.; Chen, Alan A.

2016-01-01

Antisense RNA-mediated transcriptional regulators are powerful tools for controlling gene expression and creating synthetic gene networks. RNA transcriptional repressors derived from natural mechanisms called attenuators are particularly versatile, though their mechanistic complexity has made them difficult to engineer. Here we identify a new structure–function design principle for attenuators that enables the forward engineering of new RNA transcriptional repressors. Using in-cell SHAPE-Seq to characterize the structures of attenuator variants within Escherichia coli, we show that attenuator hairpins that facilitate interaction with antisense RNAs require interior loops for proper function. Molecular dynamics simulations of these attenuator variants suggest these interior loops impart structural flexibility. We further observe hairpin flexibility in the cellular structures of natural RNA mechanisms that use antisense RNA interactions to repress translation, confirming earlier results from in vitro studies. Finally, we design new transcriptional attenuators in silico using an interior loop as a structural requirement and show that they function as desired in vivo. This work establishes interior loops as an important structural element for designing synthetic RNA gene regulators. We anticipate that the coupling of experimental measurement of cellular RNA structure and function with computational modeling will enable rapid discovery of structure–function design principles for a diverse array of natural and synthetic RNA regulators. PMID:27103533

Scenarios, personas and user stories from design ethnography: Evidence-based design representations of communicable disease investigations

PubMed Central

Turner, Anne M; Reeder, Blaine; Ramey, Judith

2014-01-01

Purpose Despite years of effort and millions of dollars spent to create a unified electronic communicable disease reporting systems, the goal remains elusive. A major barrier has been a lack of understanding by system designers of communicable disease (CD) work and the public health workers who perform this work. This study reports on the application of User Center Design representations, traditionally used for improving interface design, to translate the complex CD work identified through ethnographic studies to guide designers and developers of CD systems. The purpose of this work is to: (1) better understand public health practitioners and their information workflow with respect to communicable disease (CD) monitoring and control at a local health department, and (2) to develop evidence-based design representations that model this CD work to inform the design of future disease surveillance systems. Methods We performed extensive onsite semi-structured interviews, targeted work shadowing and a focus group to characterize local health department communicable disease workflow. Informed by principles of design ethnography and user-centered design (UCD) we created persona, scenarios and user stories to accurately represent the user to system designers. Results We sought to convey to designers the key findings from ethnographic studies: 1) that public health CD work is mobile and episodic, in contrast to current CD reporting systems, which are stationary and fixed 2) health department efforts are focused on CD investigation and response rather than reporting and 3) current CD information systems must conform to PH workflow to ensure their usefulness. In an effort to illustrate our findings to designers, we developed three contemporary design-support representations: persona, scenario, and user story. Conclusions Through application of user centered design principles, we were able to create design representations that illustrate complex public health communicable

Hamilton's Principle for Beginners

ERIC Educational Resources Information Center

Brun, J. L.

2007-01-01

I find that students have difficulty with Hamilton's principle, at least the first time they come into contact with it, and therefore it is worth designing some examples to help students grasp its complex meaning. This paper supplies the simplest example to consolidate the learning of the quoted principle: that of a free particle moving along a…

Quantum Physics Principles and Communication in the Acute Healthcare Setting: A Pilot Study.

PubMed

Helgeson, Heidi L; Peyerl, Colleen Kraft; Solheim-Witt, Marit

This pilot study explores whether clinician awareness of quantum physics principles could facilitate open communication between patients and providers. In the spirit of action research, this study was conceptualized with a holistic view of human health, using a mixed method design of grounded theory as an emergent method. Instrumentation includes surveys and a focus group discussion with twelve registered nurses working in an acute care hospital setting. Findings document that the preliminary core phenomenon, energy as information, influences communication in the healthcare environment. Key emergent themes include awareness, language, validation, open communication, strategies, coherence, incoherence and power. Research participants indicate that quantum physics principles provide a language and conceptual framework for improving their awareness of communication and interactions in the healthcare environment. Implications of this pilot study support the feasibility of future research and education on awareness of quantum physics principles in other clinical settings. Copyright © 2016 Elsevier Inc. All rights reserved.

How to improve medical education website design.

PubMed

Sisson, Stephen D; Hill-Briggs, Felicia; Levine, David

2010-04-21

The Internet provides a means of disseminating medical education curricula, allowing institutions to share educational resources. Much of what is published online is poorly planned, does not meet learners' needs, or is out of date. Applying principles of curriculum development, adult learning theory and educational website design may result in improved online educational resources. Key steps in developing and implementing an education website include: 1) Follow established principles of curriculum development; 2) Perform a needs assessment and repeat the needs assessment regularly after curriculum implementation; 3) Include in the needs assessment targeted learners, educators, institutions, and society; 4) Use principles of adult learning and behavioral theory when developing content and website function; 5) Design the website and curriculum to demonstrate educational effectiveness at an individual and programmatic level; 6) Include a mechanism for sustaining website operations and updating content over a long period of time. Interactive, online education programs are effective for medical training, but require planning, implementation, and maintenance that follow established principles of curriculum development, adult learning, and behavioral theory.

Seaworthy Quantum Key Distribution Design and Validation (SEAKEY)

DTIC Science & Technology

2014-07-25

link in a free- space channel through a marine environment (such as loss, noise and turbulence) and (2) parametrically calculating the secret key rate...width. Parametric calculations of the expected secret key rate As can be seen in Figure 6, the secret key rate of the BB84 protocol in the presence...Figure 9 shows the effect of various detriments on the secret -kay rate, for laser-decoy BB84. Figure 9: Effects of detriments on secret-key rate

Designing for Discovery Learning of Complexity Principles of Congestion by Driving Together in the TrafficJams Simulation

ERIC Educational Resources Information Center

Levy, Sharona T.; Peleg, Ran; Ofeck, Eyal; Tabor, Naamit; Dubovi, Ilana; Bluestein, Shiri; Ben-Zur, Hadar

2018-01-01

We propose and evaluate a framework supporting collaborative discovery learning of complex systems. The framework blends five design principles: (1) individual action: amidst (2) social interactions; challenged with (3) multiple tasks; set in (4) a constrained interactive learning environment that draws attention to (5) highlighted target…

The Seven Principles of Sustainable Leadership

ERIC Educational Resources Information Center

Hargreaves, Andy; Fink, Dean

2004-01-01

A study conducted by Spencer Foundation examining eight US and Canadian schools found that the key force leading to meaningful, long-term change in educational institution is leadership sustainability. The seven principles defining sustainable leadership are discussed.

Profit--The Key. Principles of the American Free Enterprise System for Distributive Education Students. Student Guide.

ERIC Educational Resources Information Center

Hook, Sallie A.; And Others

In this distributive education student's guide on the free enterprise system, principles of the American economic system are introduced as they relate to marketing and distribution. This twenty-four-page document includes directions and an introduction to the material. Twelve "Principle Sheets" on various economic concepts contain…

Basic Scientific Principles of Diving

ERIC Educational Resources Information Center

MacLean, Don

1976-01-01

Described are some of the physical and physiological scientific principles related to diving. The article is written as supplementary information for a teacher and includes suggested activities, a keyed test, and a bibliography. This article complements one on Sea Lab II in the same issue. (MA)

49 CFR 236.786 - Principle, closed circuit.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 49 Transportation 4 2010-10-01 2010-10-01 false Principle, closed circuit. 236.786 Section 236.786 Transportation Other Regulations Relating to Transportation (Continued) FEDERAL RAILROAD ADMINISTRATION... Principle, closed circuit. The principle of circuit design where a normally energized electric circuit which...

Framework for assessing causality in disease management programs: principles.

PubMed

Wilson, Thomas; MacDowell, Martin

2003-01-01

To credibly state that a disease management (DM) program "caused" a specific outcome it is required that metrics observed in the DM population be compared with metrics that would have been expected in the absence of a DM intervention. That requirement can be very difficult to achieve, and epidemiologists and others have developed guiding principles of causality by which credible estimates of DM impact can be made. This paper introduces those key principles. First, DM program metrics must be compared with metrics from a "reference population." This population should be "equivalent" to the DM intervention population on all factors that could independently impact the outcome. In addition, the metrics used in both groups should use the same defining criteria (ie, they must be "comparable" to each other). The degree to which these populations fulfill the "equivalent" assumption and metrics fulfill the "comparability" assumption should be stated. Second, when "equivalence" or "comparability" is not achieved, the DM managers should acknowledge this fact and, where possible, "control" for those factors that may impact the outcome(s). Finally, it is highly unlikely that one study will provide definitive proof of any specific DM program value for all time; thus, we strongly recommend that studies be ongoing, at multiple points in time, and at multiple sites, and, when observational study designs are employed, that more than one type of study design be utilized. Methodologically sophisticated studies that follow these "principles of causality" will greatly enhance the reputation of the important and growing efforts in DM.

Principles of designing cyber-physical system of producing mechanical assembly components at Industry 4.0 enterprise

NASA Astrophysics Data System (ADS)

Gurjanov, A. V.; Zakoldaev, D. A.; Shukalov, A. V.; Zharinov, I. O.

2018-03-01

The task of developing principles of cyber-physical system constitution at the Industry 4.0 company of the item designing components of mechanical assembly production is being studied. The task has been solved by analyzing the components and technologies, which have some practical application in the digital production organization. The list of components has been defined and the authors proposed the scheme of the components and technologies interconnection in the Industry 4.0 of mechanical assembly production to make an uninterrupted manufacturing route of the item designing components with application of some cyber-physical systems.

Designing new institutions for implementing integrated disaster risk management: key elements and future directions.

PubMed

Gopalakrishnan, Chennat; Okada, Norio

2007-12-01

The goal of integrated disaster risk management is to promote an overall improvement in the quality of safety and security in a region, city or community at disaster risk. This paper presents the case for a thorough overhaul of the institutional component of integrated disaster risk management. A review of disaster management institutions in the United States indicates significant weaknesses in their ability to contribute effectively to the implementation of integrated disaster risk management. Our analysis and findings identify eight key elements for the design of dynamic new disaster management institutions. Six specific approaches are suggested for incorporating the identified key elements in building new institutions that would have significant potential for enhancing the effective implementation of integrated disaster risk management. We have developed a possible blueprint for effective design and construction of efficient, sustainable and functional disaster management institutions.

Using in-cell SHAPE-Seq and simulations to probe structure-function design principles of RNA transcriptional regulators.

PubMed

Takahashi, Melissa K; Watters, Kyle E; Gasper, Paul M; Abbott, Timothy R; Carlson, Paul D; Chen, Alan A; Lucks, Julius B

2016-06-01

Antisense RNA-mediated transcriptional regulators are powerful tools for controlling gene expression and creating synthetic gene networks. RNA transcriptional repressors derived from natural mechanisms called attenuators are particularly versatile, though their mechanistic complexity has made them difficult to engineer. Here we identify a new structure-function design principle for attenuators that enables the forward engineering of new RNA transcriptional repressors. Using in-cell SHAPE-Seq to characterize the structures of attenuator variants within Escherichia coli, we show that attenuator hairpins that facilitate interaction with antisense RNAs require interior loops for proper function. Molecular dynamics simulations of these attenuator variants suggest these interior loops impart structural flexibility. We further observe hairpin flexibility in the cellular structures of natural RNA mechanisms that use antisense RNA interactions to repress translation, confirming earlier results from in vitro studies. Finally, we design new transcriptional attenuators in silico using an interior loop as a structural requirement and show that they function as desired in vivo. This work establishes interior loops as an important structural element for designing synthetic RNA gene regulators. We anticipate that the coupling of experimental measurement of cellular RNA structure and function with computational modeling will enable rapid discovery of structure-function design principles for a diverse array of natural and synthetic RNA regulators. © 2016 Takahashi et al.; Published by Cold Spring Harbor Laboratory Press for the RNA Society.

Simple Activity Demonstrates Wind Energy Principles

ERIC Educational Resources Information Center

Roman, Harry T.

2012-01-01

Wind energy is an exciting and clean energy option often described as the fastest-growing energy system on the planet. With some simple materials, teachers can easily demonstrate its key principles in their classroom. (Contains 1 figure and 2 tables.)

Improving the Quality of Online Discussion: The Effects of Strategies Designed Based on Cognitive Load Theory Principles

ERIC Educational Resources Information Center

Darabi, Aubteen; Jin, Li

2013-01-01

This article focuses on heavy cognitive load as the reason for the lack of quality associated with conventional online discussion. Using the principles of cognitive load theory, four online discussion strategies were designed specifically aiming at reducing the discussants' cognitive load and thus enhancing the quality of their online discussion.…

The role of socio-technical principles in leveraging meaningful benefits from IT investments.

PubMed

Doherty, Neil F

2014-03-01

In recent years there has been a great deal of academic and practitioner interest in the role of 'benefits realisation management' [BRM] approaches, as a means of proactively leveraging value from IT investments. This growing body of work owes a very considerable, but as yet unacknowledged, debt to the work of Ken Eason, and other early socio-technical theorists. Consequently, the aim of this paper is to demonstrate, using the literature, how many of the principles, practices and techniques of BRM have evolved either directly or indirectly from socio-technical approaches to systems design. In so doing, this article makes a further important contribution to the literature by explicitly identifying the underlying principles and key practices of benefits realisation management. Copyright © 2012 Elsevier Ltd and The Ergonomics Society. All rights reserved.

First-principles modeling of biological systems and structure-based drug-design.

PubMed

Sgrignani, Jacopo; Magistrato, Alessandra

2013-03-01

Molecular modeling techniques play a relevant role in drug design providing detailed information at atomistic level on the structural, dynamical, mechanistic and electronic properties of biological systems involved in diseases' onset, integrating and supporting commonly used experimental approaches. These information are often not accessible to the experimental techniques taken singularly, but are of crucial importance for drug design. Due to the enormous increase of the computer power in the last decades, quantum mechanical (QM) or first-principles-based methods have become often used to address biological issues of pharmaceutical relevance, providing relevant information for drug design. Due to their complexity and their size, biological systems are often investigated by means of a mixed quantum-classical (QM/MM) approach, which treats at an accurate QM level a limited chemically relevant portion of the system and at the molecular mechanics (MM) level the remaining of the biomolecule and its environment. This method provides a good compromise between computational cost and accuracy, allowing to characterize the properties of the biological system and the (free) energy landscape of the process in study with the accuracy of a QM description. In this review, after a brief introduction of QM and QM/MM methods, we will discuss few representative examples, taken from our work, of the application of these methods in the study of metallo-enzymes of pharmaceutical interest, of metal-containing anticancer drugs targeting the DNA as well as of neurodegenerative diseases. The information obtained from these studies may provide the basis for a rationale structure-based drug design of new and more efficient inhibitors or drugs.

Compound prism design principles, I

PubMed Central

Hagen, Nathan; Tkaczyk, Tomasz S.

2011-01-01

Prisms have been needlessly neglected as components used in modern optical design. In optical throughput, stray light, flexibility, and in their ability to be used in direct-view geometry, they excel over gratings. Here we show that even their well-known weak dispersion relative to gratings has been overrated by designing doublet and double Amici direct-vision compound prisms that have 14° and 23° of dispersion across the visible spectrum, equivalent to 800 and 1300 lines/mm gratings. By taking advantage of the multiple degrees of freedom available in a compound prism design, we also show prisms whose angular dispersion shows improved linearity in wavelength. In order to achieve these designs, we exploit the well-behaved nature of prism design space to write customized algorithms that optimize directly in the nonlinear design space. Using these algorithms, we showcase a number of prism designs that illustrate a performance and flexibility that goes beyond what has often been considered possible with prisms. PMID:22423145

Using the principles of circadian physiology enhances shift schedule design

DOE Office of Scientific and Technical Information (OSTI.GOV)

Connolly, J.J.; Moore-Ede, M.C.

1987-01-01

Nuclear power plants must operate 24 h, 7 days a week. For the most part, shift schedules currently in use at nuclear power plants have been designed to meet operational needs without considering the biological clocks of the human operators. The development of schedules that also take circadian principles into account is a positive step that can be taken to improve plant safety by optimizing operator alertness. These schedules reduce the probability of human errors especially during backshifts. In addition, training programs that teach round-the-clock workers how to deal with the problems of shiftwork can help to optimize performance andmore » alertness. These programs teach shiftworkers the underlying causes of the sleep problems associated with shiftwork and also provide coping strategies for improving sleep and dealing with the transition between shifts. When these training programs are coupled with an improved schedule, the problems associated with working round-the-clock can be significantly reduced.« less

Emerging engineering principles for yield improvement in microbial cell design.

PubMed

Comba, Santiago; Arabolaza, Ana; Gramajo, Hugo

2012-01-01

Metabolic Engineering has undertaken a rapid transformation in the last ten years making real progress towards the production of a wide range of molecules and fine chemicals using a designed cellular host. However, the maximization of product yields through pathway optimization is a constant and central challenge of this field. Traditional methods used to improve the production of target compounds from engineered biosynthetic pathways in non-native hosts include: codon usage optimization, elimination of the accumulation of toxic intermediates or byproducts, enhanced production of rate-limiting enzymes, selection of appropriate promoter and ribosome binding sites, application of directed evolution of enzymes, and chassis re-circuit. Overall, these approaches tend to be specific for each engineering project rather than a systematic practice based on a more generalizable strategy. In this mini-review, we highlight some novel and extensive approaches and tools intended to address the improvement of a target product formation, founded in sophisticated principles such as dynamic control, pathway genes modularization, and flux modeling.

Emerging engineering principles for yield improvement in microbial cell design

PubMed Central

Comba, Santiago; Arabolaza, Ana; Gramajo, Hugo

2012-01-01

Metabolic Engineering has undertaken a rapid transformation in the last ten years making real progress towards the production of a wide range of molecules and fine chemicals using a designed cellular host. However, the maximization of product yields through pathway optimization is a constant and central challenge of this field. Traditional methods used to improve the production of target compounds from engineered biosynthetic pathways in non-native hosts include: codon usage optimization, elimination of the accumulation of toxic intermediates or byproducts, enhanced production of rate-limiting enzymes, selection of appropriate promoter and ribosome binding sites, application of directed evolution of enzymes, and chassis re-circuit. Overall, these approaches tend to be specific for each engineering project rather than a systematic practice based on a more generalizable strategy. In this mini-review, we highlight some novel and extensive approaches and tools intended to address the improvement of a target product formation, founded in sophisticated principles such as dynamic control, pathway genes modularization, and flux modeling. PMID:24688676

A first principles based methodology for design of axial compressor configurations

NASA Astrophysics Data System (ADS)

Iyengar, Vishwas

Axial compressors are widely used in many aerodynamic applications. The design of an axial compressor configuration presents many challenges. Until recently, compressor design was done using 2-D viscous flow analyses that solve the flow field around cascades or in meridional planes or 3-D inviscid analyses. With the advent of modern computational methods it is now possible to analyze the 3-D viscous flow and accurately predict the performance of 3-D multistage compressors. It is necessary to retool the design methodologies to take advantage of the improved accuracy and physical fidelity of these advanced methods. In this study, a first-principles based multi-objective technique for designing single stage compressors is described. The study accounts for stage aerodynamic characteristics, rotor-stator interactions and blade elastic deformations. A parametric representation of compressor blades that include leading and trailing edge camber line angles, thickness and camber distributions was used in this study. A design of experiment approach is used to reduce the large combinations of design variables into a smaller subset. A response surface method is used to approximately map the output variables as a function of design variables. An optimized configuration is determined as the extremum of all extrema. This method has been applied to a rotor-stator stage similar to NASA Stage 35. The study has two parts: a preliminary study where a limited number of design variables were used to give an understanding of the important design variables for subsequent use, and a comprehensive application of the methodology where a larger, more complete set of design variables are used. The extended methodology also attempts to minimize the acoustic fluctuations at the rotor-stator interface by considering a rotor-wake influence coefficient (RWIC). Results presented include performance map calculations at design and off-design speed along with a detailed visualization of the flow field

The free-energy principle: a unified brain theory?

PubMed

Friston, Karl

2010-02-01

A free-energy principle has been proposed recently that accounts for action, perception and learning. This Review looks at some key brain theories in the biological (for example, neural Darwinism) and physical (for example, information theory and optimal control theory) sciences from the free-energy perspective. Crucially, one key theme runs through each of these theories - optimization. Furthermore, if we look closely at what is optimized, the same quantity keeps emerging, namely value (expected reward, expected utility) or its complement, surprise (prediction error, expected cost). This is the quantity that is optimized under the free-energy principle, which suggests that several global brain theories might be unified within a free-energy framework.

CALL Design: Principles and Practice. Proceedings of the 2014 EUROCALL Conference (Groningen, The Netherlands, August 20-23, 2014)

ERIC Educational Resources Information Center

Jager, Sake, Ed.; Bradley, Linda, Ed.; Meima, Estelle J., Ed.; Thouësny, Sylvie, Ed.

2014-01-01

The theme of EUROCALL 2014 was "CALL Design: Principles and Practice," which attracted approximately 280 practitioners, researchers and students from computer-assisted language learning (CALL) and related disciplines of more than 40 different nationalities. Over 170 presentations were delivered on topics related to this overarching…

Designing sensory-substitution devices: Principles, pitfalls and potential1

PubMed Central

Kristjánsson, Árni; Moldoveanu, Alin; Jóhannesson, Ómar I.; Balan, Oana; Spagnol, Simone; Valgeirsdóttir, Vigdís Vala; Unnthorsson, Rúnar

2016-01-01

An exciting possibility for compensating for loss of sensory function is to augment deficient senses by conveying missing information through an intact sense. Here we present an overview of techniques that have been developed for sensory substitution (SS) for the blind, through both touch and audition, with special emphasis on the importance of training for the use of such devices, while highlighting potential pitfalls in their design. One example of a pitfall is how conveying extra information about the environment risks sensory overload. Related to this, the limits of attentional capacity make it important to focus on key information and avoid redundancies. Also, differences in processing characteristics and bandwidth between sensory systems severely constrain the information that can be conveyed. Furthermore, perception is a continuous process and does not involve a snapshot of the environment. Design of sensory substitution devices therefore requires assessment of the nature of spatiotemporal continuity for the different senses. Basic psychophysical and neuroscientific research into representations of the environment and the most effective ways of conveying information should lead to better design of sensory substitution systems. Sensory substitution devices should emphasize usability, and should not interfere with other inter- or intramodal perceptual function. Devices should be task-focused since in many cases it may be impractical to convey too many aspects of the environment. Evidence for multisensory integration in the representation of the environment suggests that researchers should not limit themselves to a single modality in their design. Finally, we recommend active training on devices, especially since it allows for externalization, where proximal sensory stimulation is attributed to a distinct exterior object. PMID:27567755

Designing sensory-substitution devices: Principles, pitfalls and potential1.

PubMed

Kristjánsson, Árni; Moldoveanu, Alin; Jóhannesson, Ómar I; Balan, Oana; Spagnol, Simone; Valgeirsdóttir, Vigdís Vala; Unnthorsson, Rúnar

2016-09-21

An exciting possibility for compensating for loss of sensory function is to augment deficient senses by conveying missing information through an intact sense. Here we present an overview of techniques that have been developed for sensory substitution (SS) for the blind, through both touch and audition, with special emphasis on the importance of training for the use of such devices, while highlighting potential pitfalls in their design. One example of a pitfall is how conveying extra information about the environment risks sensory overload. Related to this, the limits of attentional capacity make it important to focus on key information and avoid redundancies. Also, differences in processing characteristics and bandwidth between sensory systems severely constrain the information that can be conveyed. Furthermore, perception is a continuous process and does not involve a snapshot of the environment. Design of sensory substitution devices therefore requires assessment of the nature of spatiotemporal continuity for the different senses. Basic psychophysical and neuroscientific research into representations of the environment and the most effective ways of conveying information should lead to better design of sensory substitution systems. Sensory substitution devices should emphasize usability, and should not interfere with other inter- or intramodal perceptual function. Devices should be task-focused since in many cases it may be impractical to convey too many aspects of the environment. Evidence for multisensory integration in the representation of the environment suggests that researchers should not limit themselves to a single modality in their design. Finally, we recommend active training on devices, especially since it allows for externalization, where proximal sensory stimulation is attributed to a distinct exterior object.

Mutual Vulnerability: A Key Principle in a Humanising Pedagogy in Post-Conflict Societies

ERIC Educational Resources Information Center

Zinn, Denise; Proteus, Kimberley; Keet, Andre

2009-01-01

In this article we argue that education in post-conflict and traumatised societies should be partly underpinned by the principle of "mutual vulnerability" as central to a humanising pedagogy. We explain the conceptual links between "reconciliation pedagogies", "mutual vulnerability" and "humanising pedagogies" and associate them with the broader…

The Operating Principle of a Fully Solid State Active Magnetic Regenerator

DOE Office of Scientific and Technical Information (OSTI.GOV)

Abdelaziz, Omar

As an alternative refrigeration technology, magnetocaloric refrigeration has the potential to be safer, quieter, more efficient, and more environmentally friendly than the conventional vapor compression refrigeration technology. Most of the reported active magnetic regenerator (AMR) systems that operate based on the magnetocaloric effect use heat transfer fluid to exchange heat, which results in complicated mechanical subsystems and components such as rotating valves and hydraulic pumps. This paper presents an operating principle of a fully solid state AMR, in which an alternative mechanism for heat transfer between the AMR and the heat source/sink is proposed. The operating principle of the fullymore » solid state AMR is based on moving rods/sheets (e.g. copper, brass, iron or aluminum), which are employed to replace the heat transfer fluid. Such fully solid state AMR would provide a significantly higher heat transfer rate than a conventional AMR because the conductivity of moving solid rods/plates is high and it enables the increase in the machine operating frequency hence the cooling capacity. The details of operating principle are presented and discussed here. One of the key enabling features for this technology is the contact between the moving rods/sheets and magnetocaloric material, and heat exchange mechanism at the heat source/sink. This paper provides an overview of the design for a fully solid state magnetocaloric refrigeration system along with guidelines for their optimal design.« less

41 CFR Appendix A to Subpart E of... - 3-Key Points and Principles

Code of Federal Regulations, 2012 CFR

2012-01-01

... Academy of Sciences or the National Academy of Public Administration? Pt. 102-3, Subpt. E, App. A Appendix... principles Section(s) Question(s) Guidance I. Section 15 of the Act allows the National Academy of Sciences... these circumstances, neither the existence of the funding agreement nor the fact that it contemplates...

41 CFR Appendix A to Subpart E of... - 3-Key Points and Principles

Code of Federal Regulations, 2011 CFR

2011-01-01

... Academy of Sciences or the National Academy of Public Administration? Pt. 102-3, Subpt. E, App. A Appendix... principles Section(s) Question(s) Guidance I. Section 15 of the Act allows the National Academy of Sciences... these circumstances, neither the existence of the funding agreement nor the fact that it contemplates...

41 CFR Appendix A to Subpart E of... - 3-Key Points and Principles

Code of Federal Regulations, 2010 CFR

2010-07-01

... Academy of Sciences or the National Academy of Public Administration? Pt. 102-3, Subpt. E, App. A Appendix... principles Section(s) Question(s) Guidance I. Section 15 of the Act allows the National Academy of Sciences... these circumstances, neither the existence of the funding agreement nor the fact that it contemplates...

41 CFR Appendix A to Subpart E of... - 3-Key Points and Principles

Code of Federal Regulations, 2014 CFR

2014-01-01

... Academy of Sciences or the National Academy of Public Administration? Pt. 102-3, Subpt. E, App. A Appendix... principles Section(s) Question(s) Guidance I. Section 15 of the Act allows the National Academy of Sciences... these circumstances, neither the existence of the funding agreement nor the fact that it contemplates...

41 CFR Appendix A to Subpart E of... - 3-Key Points and Principles

Code of Federal Regulations, 2013 CFR

2013-07-01

... Academy of Sciences or the National Academy of Public Administration? Pt. 102-3, Subpt. E, App. A Appendix... principles Section(s) Question(s) Guidance I. Section 15 of the Act allows the National Academy of Sciences... these circumstances, neither the existence of the funding agreement nor the fact that it contemplates...

Principles for designing and delivering psychosocial and mental healthcare.

PubMed

Williams, Richard; Kemp, V

2018-03-08

The development of the UK's military policy includes the potential for military organisations to deploy in support of humanitarian aid operations. This paper offers an overview of the risks to people's mental health of their exposure to emergencies, major incidents, disasters, terrorism, displacement, postconflict environments in which humanitarian aid is delivered, and deployments to conflict zones. It summarises the psychosocial approach recommended by many contemporary researchers and practitioners. It differentiates the extremely common experience of distress from the mental disorders that people who are affected may develop and introduces the construct of psychosocial resilience. The authors recognise the importance of trajectories of response in separating people who are distressed and require psychosocial care from those who require mental healthcare. Finally, this paper summarises a strategic approach to designing, planning and providing psychosocial and mental healthcare, provides a model of care and outlines the principles for early psychosocial interventions that do not require training in mental healthcare to deliver them. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2018. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

Dynamic principle for ensemble control tools.

PubMed

Samoletov, A; Vasiev, B

2017-11-28

Dynamical equations describing physical systems in contact with a thermal bath are commonly extended by mathematical tools called "thermostats." These tools are designed for sampling ensembles in statistical mechanics. Here we propose a dynamic principle underlying a range of thermostats which is derived using fundamental laws of statistical physics and ensures invariance of the canonical measure. The principle covers both stochastic and deterministic thermostat schemes. Our method has a clear advantage over a range of proposed and widely used thermostat schemes that are based on formal mathematical reasoning. Following the derivation of the proposed principle, we show its generality and illustrate its applications including design of temperature control tools that differ from the Nosé-Hoover-Langevin scheme.

Towards computational materials design from first principles using alchemical changes and derivatives.

DOE Office of Scientific and Technical Information (OSTI.GOV)

von Lilienfeld-Toal, Otto Anatole

2010-11-01

The design of new materials with specific physical, chemical, or biological properties is a central goal of much research in materials and medicinal sciences. Except for the simplest and most restricted cases brute-force computational screening of all possible compounds for interesting properties is beyond any current capacity due to the combinatorial nature of chemical compound space (set of stoichiometries and configurations). Consequently, when it comes to computationally optimizing more complex systems, reliable optimization algorithms must not only trade-off sufficient accuracy and computational speed of the models involved, they must also aim for rapid convergence in terms of number of compoundsmore » 'visited'. I will give an overview on recent progress on alchemical first principles paths and gradients in compound space that appear to be promising ingredients for more efficient property optimizations. Specifically, based on molecular grand canonical density functional theory an approach will be presented for the construction of high-dimensional yet analytical property gradients in chemical compound space. Thereafter, applications to molecular HOMO eigenvalues, catalyst design, and other problems and systems shall be discussed.« less

On the design of the PEPSI spectropolarimeter for the LBT

NASA Astrophysics Data System (ADS)

Ilyin, I.; Strassmeier, K. G.; Woche, M.; Dionies, F.; Di Varano, I.

2011-10-01

We present the design concept of the spectropolarimeter for the high-resolution echelle spectrograph PEPSI to be installed at the 2×8.4 m Large Binocular Telescope (LBT) in Arizona. We discuss the optical key elements, the principles of operations of the instrument and its instrumental polarization effects.

Evaluation of medication alerts in electronic health records for compliance with human factors principles

PubMed Central

Phansalkar, Shobha; Zachariah, Marianne; Seidling, Hanna M; Mendes, Chantal; Volk, Lynn; Bates, David W

2014-01-01

Introduction Increasing the adoption of electronic health records (EHRs) with integrated clinical decision support (CDS) is a key initiative of the current US healthcare administration. High over-ride rates of CDS alerts strongly limit these potential benefits. As a result, EHR designers aspire to improve alert design to achieve better acceptance rates. In this study, we evaluated drug–drug interaction (DDI) alerts generated in EHRs and compared them for compliance with human factors principles. Methods We utilized a previously validated questionnaire, the I-MeDeSA, to assess compliance with nine human factors principles of DDI alerts generated in 14 EHRs. Two reviewers independently assigned scores evaluating the human factors characteristics of each EHR. Rankings were assigned based on these scores and recommendations for appropriate alert design were derived. Results The 14 EHRs evaluated in this study received scores ranging from 8 to 18.33, with a maximum possible score of 26. Cohen's κ (κ=0.86) reflected excellent agreement among reviewers. The six vendor products tied for second and third place rankings, while the top system and bottom five systems were home-grown products. The most common weaknesses included the absence of characteristics such as alert prioritization, clear and concise alert messages indicating interacting drugs, actions for clinical management, and a statement indicating the consequences of over-riding the alert. Conclusions We provided detailed analyses of the human factors principles which were assessed and described our recommendations for effective alert design. Future studies should assess whether adherence to these recommendations can improve alert acceptance. PMID:24780721

Design Principles for Applied Learning: Bringing Theory and Practice Together in an Online VET Teacher-Education Degree

ERIC Educational Resources Information Center

Downing, Jillian J.

2017-01-01

This paper reports on a doctoral study that investigated an alternative pedagogical approach in an online VET teacher-education course offered at a mid-sized university in Australia. Students in the course were mature-aged and adding study to their role as in-service VET teachers. Building on previous research, a set of design principles was…

On the Pontryagin maximum principle for systems with delays. Economic applications

NASA Astrophysics Data System (ADS)

Kim, A. V.; Kormyshev, V. M.; Kwon, O. B.; Mukhametshin, E. R.

2017-11-01

The Pontryagin maximum principle [6] is the key stone of finite-dimensional optimal control theory [1, 2, 5]. So beginning with opening the maximum principle it was important to extend the maximum principle on various classes of dynamical systems. In t he paper we consider some aspects of application of i-smooth analysis [3, 4] in the theory of the Pontryagin maximum principle [6] for systems with delays, obtained results can be applied by elaborating optimal program controls in economic models with delays.

Developing Inclusive Teaching and Learning Through the Principles of Universal Design.

PubMed

Knarlag, Kjetil; Olaussen, Elinor

2016-01-01

For decades, the term reasonable accommodations has been the lead strategy and praxis in addressing diversity and disabilities in Higher Education. Universal Design for Learning (UDL) is a well-known theory and a practical approach which challenges these traditions in order to improve inclusive teaching and learning in the American school system. A European funded project, UDLL, has transferred these theories to a European context, and developed best practice guidelines for key stakeholders in European Higher Education Institutions. This universal approach challenges established traditions, methods and mindsets in addressing the diverse student population.

Helping coaches apply the principles of representative learning design: validation of a tennis specific practice assessment tool.

PubMed

Krause, Lyndon; Farrow, Damian; Reid, Machar; Buszard, Tim; Pinder, Ross

2018-06-01

Representative Learning Design (RLD) is a framework for assessing the degree to which experimental or practice tasks simulate key aspects of specific performance environments (i.e. competition). The key premise being that when practice replicates the performance environment, skills are more likely to transfer. In applied situations, however, there is currently no simple or quick method for coaches to assess the key concepts of RLD (e.g. during on-court tasks). The aim of this study was to develop a tool for coaches to efficiently assess practice task design in tennis. A consensus-based tool was developed using a 4-round Delphi process with 10 academic and 13 tennis-coaching experts. Expert consensus was reached for the inclusion of seven items, each consisting of two sub-questions related to (i) the task goal and (ii) the relevance of the task to competition performance. The Representative Practice Assessment Tool (RPAT) is proposed for use in assessing and enhancing practice task designs in tennis to increase the functional coupling between information and movement, and to maximise the potential for skill transfer to competition contexts.

Principles of light harvesting from single photosynthetic complexes.

PubMed

Schlau-Cohen, G S

2015-06-06

Photosynthetic systems harness sunlight to power most life on Earth. In the initial steps of photosynthetic light harvesting, absorbed energy is converted to chemical energy with near-unity quantum efficiency. This is achieved by an efficient, directional and regulated flow of energy through a network of proteins. Here, we discuss the following three key principles of this flow and of photosynthetic light harvesting: thermal fluctuations of the protein structure; intrinsic conformational switches with defined functional consequences; and environmentally triggered conformational switches. Through these principles, photosynthetic systems balance two types of operational costs: metabolic costs, or the cost of maintaining and running the molecular machinery, and opportunity costs, or the cost of losing any operational time. Understanding how the molecular machinery and dynamics are designed to balance these costs may provide a blueprint for improved artificial light-harvesting devices. With a multi-disciplinary approach combining knowledge of biology, this blueprint could lead to low-cost and more effective solar energy conversion. Photosynthetic systems achieve widespread light harvesting across the Earth's surface; in the face of our growing energy needs, this is functionality we need to replicate, and perhaps emulate.

Influence: A Key to Successful Leadership

ERIC Educational Resources Information Center

Hoy, Wayne K.; Smith, Page A.

2007-01-01

Purpose: The purpose of this article is to examine and condense the literature on influence and persuasion. Design/methodology/approach: The article identifies basic principles of influence in the theoretical and research literature, which are supported by empirical study. Findings: Ten principles of influence were identified, empirical support…

Design and Stability of an On-Orbit Attitude Control System Using Reaction Control Thrusters

NASA Technical Reports Server (NTRS)

Hall, Robert A.; Hough, Steven; Orphee, Carolina; Clements, Keith

2016-01-01

Basic principles for the design and stability of a spacecraft on-orbit attitude control system employing on-off Reaction Control System (RCS) thrusters are presented. Both vehicle dynamics and the control system actuators are inherently nonlinear, hence traditional linear control system design approaches are not directly applicable. This paper has two main aspects: It summarizes key RCS design principles from earlier NASA vehicles, notably the Space Shuttle and Space Station programs, and introduces advances in the linear modelling and analyses of a phase plane control system derived in the initial development of the NASA's next upper stage vehicle, the Exploration Upper Stage (EUS). Topics include thruster hardware specifications, phase plane design and stability, jet selection approaches, filter design metrics, and RCS rotational maneuver logic.

Design and Stability of an On-Orbit Attitude Control System Using Reaction Control Thrusters

NASA Technical Reports Server (NTRS)

Hall, Robert A.; Hough, Steven; Orphee, Carolina; Clements, Keith

2015-01-01

Principles for the design and stability of a spacecraft on-orbit attitude control system employing on-off Reaction Control System (RCS) thrusters is presented. Both the vehicle dynamics and the control system actuators are inherently nonlinear, hence traditional linear control system design approaches are not directly applicable. This paper has three main aspects: It summarizes key RCS control System design principles from the Space Shuttle and Space Station programs, it demonstrates a new approach to develop a linear model of a phase plane control system using describing functions, and applies each of these to the initial development of the NASA's next generation of upper stage vehicles. Topics addressed include thruster hardware specifications, phase plane design and stability, jet selection approaches, filter design metrics, and automaneuver logic.

BOOK REVIEW: WETLAND DESIGN, PRINCIPLES AND PRACTICES FOR LANDSCAPE ARCHITECTS AND LAND-USE PLANNERS

EPA Science Inventory

The book is organized in such a way that it provides a stepwise guide that begins with a basic historical and aesthetic overview of wetland design. The book then summarizes the key concepts involved in cumultive impacts from a landscape ecology persepetive, and then delves furth...

Principle of maximum entropy for reliability analysis in the design of machine components

NASA Astrophysics Data System (ADS)

Zhang, Yimin

2018-03-01

We studied the reliability of machine components with parameters that follow an arbitrary statistical distribution using the principle of maximum entropy (PME). We used PME to select the statistical distribution that best fits the available information. We also established a probability density function (PDF) and a failure probability model for the parameters of mechanical components using the concept of entropy and the PME. We obtained the first four moments of the state function for reliability analysis and design. Furthermore, we attained an estimate of the PDF with the fewest human bias factors using the PME. This function was used to calculate the reliability of the machine components, including a connecting rod, a vehicle half-shaft, a front axle, a rear axle housing, and a leaf spring, which have parameters that typically follow a non-normal distribution. Simulations were conducted for comparison. This study provides a design methodology for the reliability of mechanical components for practical engineering projects.

Teaching the foundational principles of rehabilitation psychology.

PubMed

Stiers, William

2016-02-01

Wright (1983) described 20 "value-laden beliefs and principles" that form the foundational principles of rehabilitation psychology, and the education and training of rehabilitation psychologists necessitates that they acquire the specialty-specific knowledge and attitudes/values related to these principles. This article addresses 2 questions about how these principles can be taught in rehabilitation psychology training: (a) What are the core theories and evidence supporting these foundational principles, and what should be the content of a "core curriculum" for teaching these?; and (b) What is known about the most effective methods for teaching these foundational principles, including questions of how to teach values? The foundational principles were grouped into 3 categories: individual psychological processes, social psychological processes, and values related to social integration. A literature review was conducted in these 3 categories, and the results are summarized and discussed. A core curriculum is discussed for teaching about disability-specific individual psychological processes, social psychological processes, and values related to social integration, including methods to reduce group prejudice and promote values relevant to the foundational principles. Specific suggestions for training program content and methods are provided. It is hoped that effective teaching of Wright's (1983) value-laden beliefs and principles will help rehabilitation psychology trainers and trainees focus on the key knowledge and attitude-value competencies that are to be acquired in training. (c) 2016 APA, all rights reserved).

Quantum Key Distribution

NASA Astrophysics Data System (ADS)

Hughes, Richard

2004-05-01

Quantum key distribution (QKD) uses single-photon communications to generate the shared, secret random number sequences that are used to encrypt and decrypt secret communications. The unconditional security of QKD is based on the interplay between fundamental principles of quantum physics and information theory. An adversary can neither successfully tap the transmissions, nor evade detection (eavesdropping raises the key error rate above a threshold value). QKD could be particularly attractive for free-space optical communications, both ground-based and for satellites. I will describe a QKD experiment performed over multi-kilometer line-of-sight paths, which serves as a model for a satellite-to-ground key distribution system. The system uses single-photon polarization states, without active polarization switching, and for the first time implements the complete BB84 QKD protocol including, reconciliation, privacy amplification and the all-important authentication stage. It is capable of continuous operation throughout the day and night, achieving the self-sustaining production of error-free, shared, secret bits. I will also report on the results of satellite-to-ground QKD modeling.

Increase Online Student Retention with Universal Design for Learning

ERIC Educational Resources Information Center

Tobin, Thomas J.

2014-01-01

Adopting Universal Design for Learning (UDL) principles in order to create online course content allows higher education faculty members to reach out, not only to learners with disabilities, but also to learners who are increasingly using mobile devices to connect to campus and to each other. This article outlines 5 key strategies for creating and…

Intermediate experimental vehicle, ESA program aerodynamics-aerothermodynamics key technologies for spacecraft design and successful flight

NASA Astrophysics Data System (ADS)

Dutheil, Sylvain; Pibarot, Julien; Tran, Dac; Vallee, Jean-Jacques; Tribot, Jean-Pierre

2016-07-01

With the aim of placing Europe among the world's space players in the strategic area of atmospheric re-entry, several studies on experimental vehicle concepts and improvements of critical re-entry technologies have paved the way for the flight of an experimental space craft. The successful flight of the Intermediate eXperimental Vehicle (IXV), under ESA's Future Launchers Preparatory Programme (FLPP), is definitively a significant step forward from the Atmospheric Reentry Demonstrator flight (1998), establishing Europe as a key player in this field. The IXV project objectives were the design, development, manufacture and ground and flight verification of an autonomous European lifting and aerodynamically controlled reentry system, which is highly flexible and maneuverable. The paper presents, the role of aerodynamics aerothermodynamics as part of the key technologies for designing an atmospheric re-entry spacecraft and securing a successful flight.

UCXp camera imaging principle and key technologies of data post-processing

NASA Astrophysics Data System (ADS)

Yuan, Fangyan; Li, Guoqing; Zuo, Zhengli; Liu, Jianmin; Wu, Liang; Yu, Xiaoping; Zhao, Haitao

2014-03-01

The large format digital aerial camera product UCXp was introduced into the Chinese market in 2008, the image consists of 17310 columns and 11310 rows with a pixel size of 6 mm. The UCXp camera has many advantages compared with the same generation camera, with multiple lenses exposed almost at the same time and no oblique lens. The camera has a complex imaging process whose principle will be detailed in this paper. On the other hand, the UCXp image post-processing method, including data pre-processing and orthophoto production, will be emphasized in this article. Based on the data of new Beichuan County, this paper will describe the data processing and effects.

Principles and Design of a Zeeman–Sisyphus Decelerator for Molecular Beams

PubMed Central

Tarbutt, M. R.

2016-01-01

Abstract We explore a technique for decelerating molecules using a static magnetic field and optical pumping. Molecules travel through a spatially varying magnetic field and are repeatedly pumped into a weak‐field seeking state as they move towards each strong field region, and into a strong‐field seeking state as they move towards weak field. The method is time‐independent and so is suitable for decelerating both pulsed and continuous molecular beams. By using guiding magnets at each weak field region, the beam can be simultaneously guided and decelerated. By tapering the magnetic field strength in the strong field regions, and exploiting the Doppler shift, the velocity distribution can be compressed during deceleration. We develop the principles of this deceleration technique, provide a realistic design, use numerical simulations to evaluate its performance for a beam of CaF, and compare this performance to other deceleration methods. PMID:27629547

Analysis of the EPSRC Principles of Robotics in regard to key research topics

NASA Astrophysics Data System (ADS)

Gning, A.; Davis, D. N.; Cheng, Y.; Robinson, P.

2017-07-01

In this paper, we review the five rules published in EPSRC Principles of Robotics with a specific focus on future robotics research topics. It is demonstrated through a pictorial representation of the five rules that these rules are questionably not sufficient, overlapping and not explicitly reflecting the true challenges of robotics ethics in relation to the future of robotics research.

Core principles of evolutionary medicine: A Delphi study.

PubMed

Grunspan, Daniel Z; Nesse, Randolph M; Barnes, M Elizabeth; Brownell, Sara E

2018-01-01

Evolutionary medicine is a rapidly growing field that uses the principles of evolutionary biology to better understand, prevent and treat disease, and that uses studies of disease to advance basic knowledge in evolutionary biology. Over-arching principles of evolutionary medicine have been described in publications, but our study is the first to systematically elicit core principles from a diverse panel of experts in evolutionary medicine. These principles should be useful to advance recent recommendations made by The Association of American Medical Colleges and the Howard Hughes Medical Institute to make evolutionary thinking a core competency for pre-medical education. The Delphi method was used to elicit and validate a list of core principles for evolutionary medicine. The study included four surveys administered in sequence to 56 expert panelists. The initial open-ended survey created a list of possible core principles; the three subsequent surveys winnowed the list and assessed the accuracy and importance of each principle. Fourteen core principles elicited at least 80% of the panelists to agree or strongly agree that they were important core principles for evolutionary medicine. These principles over-lapped with concepts discussed in other articles discussing key concepts in evolutionary medicine. This set of core principles will be helpful for researchers and instructors in evolutionary medicine. We recommend that evolutionary medicine instructors use the list of core principles to construct learning goals. Evolutionary medicine is a young field, so this list of core principles will likely change as the field develops further.

Design of internal screw thread measuring device based on the Three-Line method principle

NASA Astrophysics Data System (ADS)

Hu, Dachao; Chen, Jianguo

2010-08-01

In accordance with the principle of Three-Line, this paper analyze the correlation of every main parameter of internal screw thread, and then designed a device to measure the main parameters of internal screw thread. Internal thread parameters, such as the pitch diameter, thread angle and screw-pitch of common screw thread, terraced screw thread, zigzag screw thread were obtained through calculation and measurement. The practical applications have proved that this device is convenience to use, and the measurements have a high accuracy. Meanwhile, the application for the patent of invention has been accepted by the Patent Office (Filing number: 200710044081.5).

Research on key technology of planning and design for AC/DC hybrid distribution network

NASA Astrophysics Data System (ADS)

Shen, Yu; Wu, Guilian; Zheng, Huan; Deng, Junpeng; Shi, Pengjia

2018-04-01

With the increasing demand of DC generation and DC load, the development of DC technology, AC and DC distribution network integrating will become an important form of future distribution network. In this paper, the key technology of planning and design for AC/DC hybrid distribution network is proposed, including the selection of AC and DC voltage series, the design of typical grid structure and the comprehensive evaluation method of planning scheme. The research results provide some ideas and directions for the future development of AC/DC hybrid distribution network.

The inconstant "principle of constancy".

PubMed

Kanzer, M

1983-01-01

A review of the principle of constancy, as it appeared in Freud's writings, shows that it was inspired by his clinical observations, first with Breuer in the field of cathartic therapy and then through experiences in the early usage of psychoanalysis. The recognition that memories repressed in the unconscious created increasing tension, and that this was relieved with dischargelike phenomena when the unconscious was made conscious, was the basis for his claim to originality in this area. The two principles of "neuronic inertia" Freud expounded in the Project (1895), are found to offer the key to the ambiguous definition of the principle of constancy he was to offer in later years. The "original" principle, which sought the complete discharge of energy (or elimination of stimuli), became the forerunner of the death drive; the "extended" principle achieved balances that were relatively constant, but succumbed in the end to complete discharge. This was the predecessor of the life drives. The relation between the constancy and pleasure-unpleasure principles was maintained for twenty-five years largely on an empirical basis which invoked the concept of psychophysical parallelism between "quantity" and "quality." As the links between the two principles were weakened by clinical experiences attendant upon the growth of ego psychology, a revision of the principle of constancy was suggested, and it was renamed the Nirvana principle. Actually it was shifted from alignment with the "extended" principle of inertia to the original, so that "constancy" was incongruously identified with self-extinction. The former basis for the constancy principle, the extended principle of inertia, became identified with Eros. Only a few commentators seem aware of this radical transformation, which has been overlooked in the Standard Edition of Freud's writings. Physiological biases in the history and conception of the principle of constancy are noted in the Standard Edition. The historical

Principles underlying rational design of live attenuated influenza vaccines

PubMed Central

Jang, Yo Han

2012-01-01

Despite recent innovative advances in molecular virology and the developments of vaccines, influenza virus remains a serious burden for human health. Vaccination has been considered a primary countermeasure for prevention of influenza infection. Live attenuated influenza vaccines (LAIVs) are particularly attracting attention as an effective strategy due to several advantages over inactivated vaccines. Cold-adaptation, as a classical means for attenuating viral virulence, has been successfully used for generating safe and effective donor strains of LAIVs against seasonal epidemics and occasional pandemics. Recently, the advent of reverse genetics technique expedited a variety of rational strategies to broaden the pool of LAIVs. Considering the breadth of antigenic diversity of influenza virus, the pool of LAIVs is likely to equip us with better options for controlling influenza pandemics. With a brief reflection on classical attenuating strategies used at the initial stage of development of LAIVs, especially on the principles underlying the development of cold-adapted LAIVs, we further discuss and outline other attenuation strategies especially with respect to the rationales for attenuation, and their practicality for mass production. Finally, we propose important considerations for a rational vaccine design, which will provide us with practical guidelines for improving the safety and effectiveness of LAIVs. PMID:23596576

THE MAXIMIUM POWER PRINCIPLE: AN EMPIRICAL INVESTIGATION

EPA Science Inventory

The maximum power principle is a potential guide to understanding the patterns and processes of ecosystem development and sustainability. The principle predicts the selective persistence of ecosystem designs that capture a previously untapped energy source. This hypothesis was in...

Key principles of community-based natural resource management: a synthesis and interpretation of identified effective approaches for managing the commons.

PubMed

Gruber, James S

2010-01-01

This article examines recent research on approaches to community-based environmental and natural resource management and reviews the commonalities and differences between these interdisciplinary and multistakeholder initiatives. To identify the most effective characteristics of Community-based natural resource management (CBNRM), I collected a multiplicity of perspectives from research teams and then grouped findings into a matrix of organizational principles and key characteristics. The matrix was initially vetted (or "field tested") by applying numerous case studies that were previously submitted to the World Bank International Workshop on CBNRM. These practitioner case studies were then compared and contrasted with the findings of the research teams. It is hoped that the developed matrix may be useful to researchers in further focusing research, understanding core characteristics of effective and sustainable CBNRM, providing practitioners with a framework for developing new CBNRM initiatives for managing the commons, and providing a potential resource for academic institutions during their evaluation of their practitioner-focused environmental management and leadership curriculum.

Practices in Adequate Structural Design

NASA Technical Reports Server (NTRS)

Ryan, Robert S.

1989-01-01

Structural design and verification of space vehicles and space systems is a very tricky and awe inspiring business, particularly for manned missions. Failures in the missions with loss of life is devastating personally and nationally. The scope of the problem is driven by high performance requirements which push state-of-the-art technologies, creating high sensitivites to small variations and uncertainties. Insurance of safe, reliable flight dictates the use of sound principles, procedures, analysis, and testing. Many of those principles which were refocused by the Space Shuttle Challenger (51-L) accident on January 26, 1986, and the activities conducted to insure safe shuttle reflights are discussed. The emphasis will be focused on engineering, while recognizing that project and project management are also key to success.

Practices in adequate structural design

NASA Astrophysics Data System (ADS)

Ryan, Robert S.

1989-01-01

Structural design and verification of space vehicles and space systems is a very tricky and awe inspiring business, particularly for manned missions. Failures in the missions with loss of life is devastating personally and nationally. The scope of the problem is driven by high performance requirements which push state-of-the-art technologies, creating high sensitivites to small variations and uncertainties. Insurance of safe, reliable flight dictates the use of sound principles, procedures, analysis, and testing. Many of those principles which were refocused by the Space Shuttle Challenger (51-L) accident on January 26, 1986, and the activities conducted to insure safe shuttle reflights are discussed. The emphasis will be focused on engineering, while recognizing that project and project management are also key to success.

Security of Color Image Data Designed by Public-Key Cryptosystem Associated with 2D-DWT

NASA Astrophysics Data System (ADS)

Mishra, D. C.; Sharma, R. K.; Kumar, Manish; Kumar, Kuldeep

2014-08-01

In present times the security of image data is a major issue. So, we have proposed a novel technique for security of color image data by public-key cryptosystem or asymmetric cryptosystem. In this technique, we have developed security of color image data using RSA (Rivest-Shamir-Adleman) cryptosystem with two-dimensional discrete wavelet transform (2D-DWT). Earlier proposed schemes for security of color images designed on the basis of keys, but this approach provides security of color images with the help of keys and correct arrangement of RSA parameters. If the attacker knows about exact keys, but has no information of exact arrangement of RSA parameters, then the original information cannot be recovered from the encrypted data. Computer simulation based on standard example is critically examining the behavior of the proposed technique. Security analysis and a detailed comparison between earlier developed schemes for security of color images and proposed technique are also mentioned for the robustness of the cryptosystem.

Efficient and Effective Change Principles in Active Videogames

PubMed Central

Fenner, Ashley A.; Howie, Erin K.; Feltz, Deborah L.; Gray, Cindy M.; Lu, Amy Shirong; Mueller, Florian “Floyd”; Simons, Monique; Barnett, Lisa M.

2015-01-01

Abstract Active videogames have the potential to enhance population levels of physical activity but have not been successful in achieving this aim to date. This article considers a range of principles that may be important to the design of effective and efficient active videogames from diverse discipline areas, including behavioral sciences (health behavior change, motor learning, and serious games), business production (marketing and sales), and technology engineering and design (human–computer interaction/ergonomics and flow). Both direct and indirect pathways to impact on population levels of habitual physical activity are proposed, along with the concept of a game use lifecycle. Examples of current active and sedentary electronic games are used to understand how such principles may be applied. Furthermore, limitations of the current usage of theoretical principles are discussed. A suggested list of principles for best practice in active videogame design is proposed along with suggested research ideas to inform practice to enhance physical activity. PMID:26181680

Efficient and Effective Change Principles in Active Videogames.

PubMed

Straker, Leon M; Fenner, Ashley A; Howie, Erin K; Feltz, Deborah L; Gray, Cindy M; Lu, Amy Shirong; Mueller, Florian Floyd; Simons, Monique; Barnett, Lisa M

2015-02-01

Active videogames have the potential to enhance population levels of physical activity but have not been successful in achieving this aim to date. This article considers a range of principles that may be important to the design of effective and efficient active videogames from diverse discipline areas, including behavioral sciences (health behavior change, motor learning, and serious games), business production (marketing and sales), and technology engineering and design (human-computer interaction/ergonomics and flow). Both direct and indirect pathways to impact on population levels of habitual physical activity are proposed, along with the concept of a game use lifecycle. Examples of current active and sedentary electronic games are used to understand how such principles may be applied. Furthermore, limitations of the current usage of theoretical principles are discussed. A suggested list of principles for best practice in active videogame design is proposed along with suggested research ideas to inform practice to enhance physical activity.

Research on Product Conceptual Design Based on Integrated of TRIZ and HOQ

NASA Astrophysics Data System (ADS)

Xie, Jianmin; Tang, Xiaowo; Shao, Yunfei

The conceptual design determines the success of the final product quality and competition of market. The determination of design parameters and the effective method to resolve parameters contradiction are the key to success. In this paper, the concept of HOQ products designed to determine the parameters, then using the TRIZ contradiction matrix and inventive principles of design parameters to solve the problem of contradictions. Facts have proved that the effective method is to obtain the product concept design parameters and to resolve contradictions line parameters.

The precautionary principle and pharmaceutical risk management.

PubMed

Callréus, Torbjörn

2005-01-01

Although it is often vigorously contested and has several different formulations, the precautionary principle has in recent decades guided environmental policy making in the face of scientific uncertainty. Originating from a criticism of traditional risk assessment, the key element of the precautionary principle is the justification for acting in the face of uncertain knowledge about risks. In the light of its growing invocation in various areas that are related to public health and recently in relation to drug safety issues, this article presents an introductory review of the main elements of the precautionary principle and some arguments conveyed by its advocates and opponents. A comparison of the characteristics of pharmaceutical risk management and environmental policy making (i.e. the setting within which the precautionary principle evolved), indicates that several important differences exist. If believed to be of relevance, in order to avoid arbitrary and unpredictable decision making, both the interpretation and possible application of the precautionary principle need to be adapted to the conditions of pharmaceutical risk management.

The Principle and the Application of Self-cleaning Anti-pollution Coating in Power System

NASA Astrophysics Data System (ADS)

Zhao, Y. J.; Zhang, Z. B.; Liu, Y.; Wang, J. H.; Teng, J. L.; Wu, L. S.; Zhang, Y. L.

2017-11-01

The common problem existed in power system is analyzed in this paper. The main reason for the affection of the safe and stable operation to power equipment is flash-over caused by dirt and discharge. Using the self-cleaning anti-pollution coating in the power equipment surface is the key to solve the problem. In the work, the research progress and design principle about the self-cleaning anti-pollution coating was summarized. Furthermore, the preparation technology was also studied. Finally, the application prospect of hard self-cleaning anti-pollution coating in power system was forecast.

How quantitative measures unravel design principles in multi-stage phosphorylation cascades.

PubMed

Frey, Simone; Millat, Thomas; Hohmann, Stefan; Wolkenhauer, Olaf

2008-09-07

We investigate design principles of linear multi-stage phosphorylation cascades by using quantitative measures for signaling time, signal duration and signal amplitude. We compare alternative pathway structures by varying the number of phosphorylations and the length of the cascade. We show that a model for a weakly activated pathway does not reflect the biological context well, unless it is restricted to certain parameter combinations. Focusing therefore on a more general model, we compare alternative structures with respect to a multivariate optimization criterion. We test the hypothesis that the structure of a linear multi-stage phosphorylation cascade is the result of an optimization process aiming for a fast response, defined by the minimum of the product of signaling time and signal duration. It is then shown that certain pathway structures minimize this criterion. Several popular models of MAPK cascades form the basis of our study. These models represent different levels of approximation, which we compare and discuss with respect to the quantitative measures.

Establishing security of quantum key distribution without monitoring disturbance

NASA Astrophysics Data System (ADS)

Koashi, Masato

2015-10-01

In conventional quantum key distribution (QKD) protocols, the information leak to an eavesdropper is estimated through the basic principle of quantum mechanics dictated in the original version of Heisenberg's uncertainty principle. The amount of leaked information on a shared sifted key is bounded from above essentially by using information-disturbance trade-off relations, based on the amount of signal disturbance measured via randomly sampled or inserted probe signals. Here we discuss an entirely different avenue toward the private communication, which does not rely on the information disturbance trade-off relations and hence does not require a monitoring of signal disturbance. The independence of the amount of privacy amplification from that of disturbance tends to give it a high tolerance on the channel noises. The lifting of the burden of precise statistical estimation of disturbance leads to a favorable finite-key-size effect. A protocol based on the novel principle can be implemented by only using photon detectors and classical optics tools: a laser, a phase modulator, and an interferometer. The protocol resembles the differential-phase-shift QKD protocol in that both share a simple binary phase shift keying on a coherent train of weak pulses from a laser. The difference lies in the use of a variable-delay interferometer in the new protocol, which randomly changes the combination of pulse pairs to be superposed. This extra randomness has turned out to be enough to upper-bound the information extracted by the eavesdropper, regardless of how they have disturbed the quantum signal.

The keys to healthy family child care homes intervention: study design and rationale.

PubMed

Østbye, Truls; Mann, Courtney M; Vaughn, Amber E; Namenek Brouwer, Rebecca J; Benjamin Neelon, Sara E; Hales, Derek; Bangdiwala, Shrikant I; Ward, Dianne S

2015-01-01

Obesity is a major public health problem for which early preventive interventions are needed. Large numbers of young children are enrolled in some form of child care program, making these facilities influential environments in children's development. Family child care homes (FCCH) are a specific type of child care in which children are cared for within the provider's own residence. FCCHs serve approximately 1.5 million children in the U.S.; however, research to date has overlooked FCCH providers and their potential to positively influence children's health-related behaviors. Keys to Healthy Family Child Care Homes (Keys) is a cluster-randomized controlled trial testing the efficacy of an intervention designed to help providers become healthy role models, provide quality food- and physical activity-supportive FCCH environments, and implement effective business practices. The intervention is delivered through workshops, home visits, tailored coaching calls, and educational toolkits. Primary outcomes are child physical activity measured via accelerometry data and dietary intake data collected using direct observation at the FCCH. Secondary outcomes include child body mass index, provider weight-related behaviors, and observed obesogenic environmental characteristics. Keys is an innovative approach to promoting healthy eating and physical activity in young children. The intervention operates in a novel setting, targets children during a key developmental period, and addresses both provider and child behaviors to synergistically promote health. Copyright © 2014. Published by Elsevier Inc.

The Keys to Healthy Family Child Care Homes intervention: Study design and rationale

PubMed Central

Østbye, Truls; Mann, Courtney M.; Vaughn, Amber E.; Namenek Brouwer, Rebecca J.; Benjamin Neelon, Sara E.; Hales, Derek; Bangdiwala, Shrikant I.; Ward, Dianne S.

2014-01-01

Background Obesity is a major public health problem for which early preventive interventions are needed. Large numbers of young children are enrolled in some form of child care program, making these facilities influential environments in children’s development. Family child care homes (FCCH) are a specific type of child care in which children are cared for within the provider’s own residence. FCCHs serve approximately 1.5 million children in the U.S.; however, research to date has overlooked FCCH providers and their potential to positively influence children’s health-related behaviors. Methods Keys to Healthy Family Child Care Homes (Keys) is a cluster-randomized controlled trial testing the efficacy of an intervention designed to help providers become healthy role models, provide quality food- and physical activity-supportive FCCH environments, and implement effective business practices. The intervention is delivered through workshops, home visits, tailored coaching calls, and educational toolkits. Primary outcomes are child physical activity measured via accelerometry data and dietary intake data collected using direct observation at the FCCH. Secondary outcomes include child body mass index, provider weight-related behaviors, and observed obesogenic environmental characteristics. Conclusion Keys is an innovative approach to promoting healthy eating and physical activity in young children. The intervention operates in a novel setting, targets children during a key developmental period, and addresses both provider and child behaviors to synergistically promote health. PMID:25460337

Value-Based Insurance Design Pharmacy Benefits for Children and Youth With Special Health Care Needs: Principles and Opportunities.

PubMed

Helm, Mark E

2017-05-01

Value-based insurance design (VBID) represents an innovative approach to health insurance coverage. In the context of pharmacy benefits, the goal of VBID is to minimize access barriers to the most effective and appropriate treatments for specific medical conditions. Both private and public insurance programs have explored VBID pharmacy projects primarily for medical conditions affecting adults. To date, evidence for VBID pharmacy programs for children and youth with special health care needs (CYSHCN) appears lacking. There appears to be potential for VBID concepts to be applied to pharmacy coverage benefiting CYSHCN. An overview of VBID pharmacy principles and guiding principles are presented. Opportunities for the creation of pharmacy programs with a value-based orientation and challenges to the redesign of pharmacy benefits are identified. VBID pharmacy coverage principles may be helpful to improve medication use and important clinical outcomes while lowering barriers to medication use for the population of CYSHCN. Pilot projects of VBID pharmacy benefits for children and youth should be explored. However, many questions remain. Copyright © 2017 by the American Academy of Pediatrics.

Set Partitions and the Multiplication Principle

ERIC Educational Resources Information Center

Lockwood, Elise; Caughman, John S., IV

2016-01-01

To further understand student thinking in the context of combinatorial enumeration, we examine student work on a problem involving set partitions. In this context, we note some key features of the multiplication principle that were often not attended to by students. We also share a productive way of thinking that emerged for several students who…

Principles of Emergency Department facility design for optimal management of mass-casualty incidents.

PubMed

Halpern, Pinchas; Goldberg, Scott A; Keng, Jimmy G; Koenig, Kristi L

2012-04-01

The Emergency Department (ED) is the triage, stabilization and disposition unit of the hospital during a mass-casualty incident (MCI). With most EDs already functioning at or over capacity, efficient management of an MCI requires optimization of all ED components. While the operational aspects of MCI management have been well described, the architectural/structural principles have not. Further, there are limited reports of the testing of ED design components in actual MCI events. The objective of this study is to outline the important infrastructural design components for optimization of ED response to an MCI, as developed, implemented, and repeatedly tested in one urban medical center. In the authors' experience, the most important aspects of ED design for MCI have included external infrastructure and promoting rapid lockdown of the facility for security purposes; an ambulance bay permitting efficient vehicle flow and casualty discharge; strategic placement of the triage location; patient tracking techniques; planning adequate surge capacity for both patients and staff; sufficient command, control, communications, computers, and information; well-positioned and functional decontamination facilities; adequate, well-located and easily distributed medical supplies; and appropriately built and functioning essential services. Designing the ED to cope well with a large casualty surge during a disaster is not easy, and it may not be feasible for all EDs to implement all the necessary components. However, many of the components of an appropriate infrastructural design add minimal cost to the normal expenditures of building an ED. This study highlights the role of design and infrastructure in MCI preparedness in order to assist planners in improving their ED capabilities. Structural optimization calls for a paradigm shift in the concept of structural and operational ED design, but may be necessary in order to maximize surge capacity, department resilience, and patient and

Structural design principles for delivery of bioactive components in nutraceuticals and functional foods.

PubMed

McClements, David Julian; Decker, Eric Andrew; Park, Yeonhwa; Weiss, Jochen

2009-06-01

There have been major advances in the design and fabrication of structured delivery systems for the encapsulation of nutraceutical and functional food components. A wide variety of delivery systems is now available, each with its own advantages and disadvantages for particular applications. This review begins by discussing some of the major nutraceutical and functional food components that need to be delivered and highlights the main limitations to their current utilization within the food industry. It then discusses the principles underpinning the rational design of structured delivery systems: the structural characteristics of the building blocks; the nature of the forces holding these building blocks together; and, the different ways of assembling these building blocks into structured delivery systems. Finally, we review the major types of structured delivery systems that are currently available to food scientists: lipid-based (simple, multiple, multilayer, and solid lipid particle emulsions); surfactant-based (simple micelles, mixed micelles, vesicles, and microemulsions) and biopolymer-based (soluble complexes, coacervates, hydrogel droplets, and particles). For each type of delivery system we describe its preparation, properties, advantages, and limitations.

Universal Design: Process, Principles, and Applications

ERIC Educational Resources Information Center

Burgstahler, Sheryl

2009-01-01

Designing any product or environment involves the consideration of many factors, including aesthetics, engineering options, environmental issues, safety concerns, industry standards, and cost. Typically, designers focus their attention on the average user. In contrast, universal design (UD), according to the Center for Universal Design," is…

Magnetism: Principles and Applications

NASA Astrophysics Data System (ADS)

Craik, Derek J.

2003-09-01

If you are studying physics, chemistry, materials science, electrical engineering, information technology or medicine, then you'll know that understanding magnetism is fundamental to success in your studies and here is the key to unlocking the mysteries of magnetism....... You can: obtain a simple overview of magnetism, including the roles of B and H, resonances and special techniques take full advantage of modern magnets with a wealth of expressions for fields and forces develop realistic general design programmes using isoparametric finite elements study the subtleties of the general theory of magnetic moments and their dynamics follow the development of outstanding materials appreciate how magnetism encompasses topics as diverse as rock magnetism, chemical reaction rates, biological compasses, medical therapies, superconductivity and levitation understand the basis and remarkable achievements of magnetic resonance imaging In his new book, Magnetism, Derek Craik throws light on the principles and applications of this fascinating subject. From formulae for calculating fields to quantum theory, the secrets of magnetism are exposed, ensuring that whether you are a chemist or engineer, physicist, medic or materials scientist Magnetism is the book for our course.

Design of a Single Motor Based Leg Structure with the Consideration of Inherent Mechanical Stability

NASA Astrophysics Data System (ADS)

Taha Manzoor, Muhammad; Sohail, Umer; Noor-e-Mustafa; Nizami, Muhammad Hamza Asif; Ayaz, Yasar

2017-07-01

The fundamental aspect of designing a legged robot is constructing a leg design that is robust and presents a simple control problem. In this paper, we have successfully designed a robotic leg based on a unique four bar mechanism with only one motor per leg. The leg design parameters used in our platform are extracted from design principles used in biological systems, multiple iterations and previous research findings. These principles guide a robotic leg to have minimal mechanical passive impedance, low leg mass and inertia, a suitable foot trajectory utilizing a practical balance between leg kinematics and robot usage, and the resultant inherent mechanical stability. The designed platform also exhibits the key feature of self-locking. Theoretical tools and software iterations were used to derive these practical features and yield an intuitive sense of the required leg design parameters.

The meaning of the EPSRC principles of robotics

NASA Astrophysics Data System (ADS)

Bryson, Joanna J.

2017-04-01

In revisiting the Principles of Robotics (as we do in this special issue), it is important to carefully consider their full meaning - their history, the intentions behind them, and their actual societal impact to date. Here I address first the meaning of the document as a whole, then of its constituent parts. Further, I describe the nature of policy, and use the Principles as a case study to discuss how government and academia can interact in constructing policy. I defend the Principles and their main themes: that commercially manufactured robots should not be responsible parties under the law, and that users should not be deceived about robots' capacities or moral status. This perspective allows for the incorporation of robots immediately into UK society and law - the objective of the Principles. The Principles were not designed for every conceivable robot, but rather serve in part as design specifications for robots to be incorporated as legal products into British society.

AmI in good care? Developing design principles for ambient intelligent domotics for elderly.

PubMed

Meulendijk, Michiel; Van De Wijngaert, Lidwien; Brinkkemper, Sjaak; Leenstra, Herbert

2011-03-01

The combination of ambient intelligence (AmI) and domotics has the potential to respond to elderly people's desire to live independent from extensive forms of care. Their slow adoption of technological aids shows reluctance, though. This article investigates their motivations to adopt ambient intelligent domotics, and proposes design principles specifically based on their preferences and experiences. Respondents appeared to be more acceptive of tangible problems they expected with AmI domotics than intangible ones. In addition, their opinions seemed to be profoundly influenced by the way they perceived their psychological quality of life, while their physical conditions did not seem to have noticeable impacts.

Architecting the "Third Teacher": Solid Foundations for the Participatory and Principled Design of Schools and (Built) Learning Environments

ERIC Educational Resources Information Center

Hall, Tony

2017-01-01

This issue of the "European Journal of Education" examines a crucially important, though largely overlooked, area in educational design research: architecting and building physical educational environments. Effective policymaking in school design necessitates the negotiated, shared and timely input of key educational stakeholders,…

Designing organizational structures: Key thoughts for development.

PubMed

Killingsworth, Patricia; Eschenbacher, Lynn

2018-04-01

Current strategies and concepts to consider in developing a system-level organizational structure for the pharmacy enterprise are discussed. There are many different ways to design an organizational structure for the pharmacy enterprise within a health system. The size of the organization, the number of states in which it operates, and the geographic spread and complexity of the pharmacy business lines should be among the key considerations in determining the optimal organizational and decision-making structures for the pharmacy enterprise. The structure needs to support incorporation of the pharmacy leadership (both system-level executives and local leaders) into all strategic planning and discussions at the hospital and health-system levels so that they can directly represent the pharmacy enterprise instead of relying on others to develop strategy on their behalf. It is important that leaders of all aspects of the pharmacy enterprise report through the system's top pharmacy executive, who should be a pharmacist and have a title consistent with those of other leaders reporting at the same organizational level (e.g., chief pharmacy officer). Pharmacy leaders need to be well positioned within an organization to advocate for the pharmacy enterprise and use all resources to the best of their ability. As the scope and complexity of pharmacy services grow, it is critical to ensure that leadership of the pharmacy enterprise is unified under a single pharmacy executive team. Copyright © 2018 by the American Society of Health-System Pharmacists, Inc. All rights reserved.

Cognitive Theory of Multimedia Learning, Instructional Design Principles, and Students with Learning Disabilities in Computer-Based and Online Learning Environments

ERIC Educational Resources Information Center

Greer, Diana L.; Crutchfield, Stephen A.; Woods, Kari L.

2013-01-01

Struggling learners and students with Learning Disabilities often exhibit unique cognitive processing and working memory characteristics that may not align with instructional design principles developed with typically developing learners. This paper explains the Cognitive Theory of Multimedia Learning and underlying Cognitive Load Theory, and…

Biologically inspired binaural hearing aid algorithms: Design principles and effectiveness

NASA Astrophysics Data System (ADS)

Feng, Albert

2002-05-01

Despite rapid advances in the sophistication of hearing aid technology and microelectronics, listening in noise remains problematic for people with hearing impairment. To solve this problem two algorithms were designed for use in binaural hearing aid systems. The signal processing strategies are based on principles in auditory physiology and psychophysics: (a) the location/extraction (L/E) binaural computational scheme determines the directions of source locations and cancels noise by applying a simple subtraction method over every frequency band; and (b) the frequency-domain minimum-variance (FMV) scheme extracts a target sound from a known direction amidst multiple interfering sound sources. Both algorithms were evaluated using standard metrics such as signal-to-noise-ratio gain and articulation index. Results were compared with those from conventional adaptive beam-forming algorithms. In free-field tests with multiple interfering sound sources our algorithms performed better than conventional algorithms. Preliminary intelligibility and speech reception results in multitalker environments showed gains for every listener with normal or impaired hearing when the signals were processed in real time with the FMV binaural hearing aid algorithm. [Work supported by NIH-NIDCD Grant No. R21DC04840 and the Beckman Institute.

Principles of VCSEL designing

NASA Astrophysics Data System (ADS)

Nakwaski, W.

2008-03-01

Comprehensive computer simulations are currently the most efficient and cheap methods in designing and optimisation of semiconductor device structures. Seemingly they should be as exact as possible, but in practice it is well known that the most exact approaches are also the most involved and the most time-consuming ones and need powerful computers. In some cases, cheaper somewhat simplified modelling simulations are sufficiently accurate. Therefore, an appropriate modelling approach should be chosen taking into account a compromise between our needs and our possibilities. Modelling of operation and designing of structures of vertical-cavity surface-emitting diode lasers (VCSELs) requires appropriate mathematical description of physical processes crucial for devices operation, i.e., various optical, electrical, thermal, recombination and sometimes also mechanical phenomena taking place within their volumes. Equally important are mutual interactions between above individual processes, usually strongly non-linear and creating a real network of various inter-relations. Chain is as strong as its weakest link. Analogously, model is as exact as its less exact part. Therefore it is useless to improve exactness of its more accurate parts and not to care about less exact ones. All model parts should exhibit similar accuracy. In any individual case, a reasonable compromise should be reached between high modelling fidelity and its practical convenience depending on a main modelling goal, importance and urgency of expected results, available equipment and also financial possibilities. In the present paper, some simplifications used in VCSEL modelling are discussed and their impact on exactness of VCSEL designing is analysed.

Principles that underpin effective school-based drug education.

PubMed

Midford, Richard; Munro, Geoffrey; McBride, Nyanda; Snow, Pamela; Ladzinski, Ursula

2002-01-01

This study identifies the conceptual underpinnings of effective school-based drug education practice in light of contemporary research evidence and the practical experience of a broad range of drug education stakeholders. The research involved a review of the literature, a national survey of 210 Australian teachers and others involved in drug education, and structured interviews with 22 key Australian drug education policy stakeholders. The findings from this research have been distilled and presented as a list of 16 principles that underpin effective drug education. In broad terms, drug education should be evidence-based, developmentally appropriate, sequential, and contextual. Programs should be initiated before drug use commences. Strategies should be linked to goals and should incorporate harm minimization. Teaching should be interactive and use peer leaders. The role of the classroom teacher is central. Certain program content is important, as is social and resistance skills training. Community values, the social context of use, and the nature of drug harm have to be addressed. Coverage needs to be adequate and supported by follow-up. It is envisaged that these principles will provide all those involved in the drug education field with a set of up-to-date, research-based guidelines against which to reference decisions on program design, selection, implementation, and evaluation.

Integrated Approach to Industrial Packaging Design

NASA Astrophysics Data System (ADS)

Vorobeva, O.

2017-11-01

The article reviews studies in the field of industrial packaging design. The major factors which influence technological, ergonomic, economic and ecological features of packaging are established. The main modern trends in packaging design are defined, the principles of marketing communications and their influence on consumers’ consciousness are indicated, and the function of packaging as a transmitter of brand values is specified. Peculiarities of packaging technology and printing techniques in modern printing industry are considered. The role of designers in the stage-by-stage development of the construction, form and graphic design concept of packaging is defined. The examples of authentic packaging are given and the mention of the tetrahedron packaging history is made. At the end of the article, conclusions on the key research aspects are made.

Atomic-scale insight and design principles for turbine engine thermal barrier coatings from theory

PubMed Central

Marino, Kristen A.; Hinnemann, Berit; Carter, Emily A.

2011-01-01

To maximize energy efficiency, gas turbine engines used in airplanes and for power generation operate at very high temperatures, even above the melting point of the metal alloys from which they are comprised. This feat is accomplished in part via the deposition of a multilayer, multicomponent thermal barrier coating (TBC), which lasts up to approximately 40,000 h before failing. Understanding failure mechanisms can aid in designing circumvention strategies. We review results of quantum mechanics calculations used to test hypotheses about impurities that harm TBCs and transition metal (TM) additives that render TBCs more robust. In particular, we discovered a number of roles that Pt and early TMs such as Hf and Y additives play in extending the lifetime of TBCs. Fundamental insight into the nature of the bonding created by such additives and its effect on high-temperature evolution of the TBCs led to design principles that can be used to create materials for even more efficient engines.

Diamonds in the rough: key performance indicators for reticles and design sets

NASA Astrophysics Data System (ADS)

Ackmann, Paul

2008-10-01

The discussion on reticle cost continues to raise questions by many in the semiconductor industry. The diamond industry developed a method to judge and grade diamonds. [1, 11] The diamond-marketing tool of "The 4Cs of Diamonds" and other slogans help explain the multiple, complex variables that determine the value of a particular stone. Understanding the critical factors of Carat, Clarity, Color, and Cut allows all customers to choose a gem that matches their unique desires. I apply the same principles of "The 4Cs of Diamonds" to develop an analogous method for rating and tracking reticle performance. I introduced the first 3Cs of reticle manufacturing during my BACUS presentation panel at SPIE in February 2008. [2] To these first 3Cs (Capital, Complexity, and Content), I now add a fourth, Cycle time. I will look at how our use of reticles changes by node and use "The 4Cs of Reticles" to develop the key performance indicators (KPI) that will help our industry set standards for evaluating reticle technology. Capital includes both cost and utilization. This includes tools, people, facilities, and support systems required for building the most critical reticles. Tools have highest value in the first two years of use, and each new technology node will likely increase the Capital cost of reticles. New technologies, specifications, and materials drive Complexity for reticles, including smaller feature size, increased optical proximity correction (OPC), and more levels at sub-wavelength. The large data files needed to create finer features require the use of the newest tools for writing, inspection, and repair. Content encompasses the customer's specifications and requirements, which the mask shop must meet. The specifications are critical because they drive wafer yield. A clear increase of the number of masking levels has occurred since the 90 nm node. Cycle time starts when the design is finished and lasts until the mask house ships the reticle to the fab. Depending on

Design Principles and Algorithms for Air Traffic Arrival Scheduling

NASA Technical Reports Server (NTRS)

Erzberger, Heinz; Itoh, Eri

2014-01-01

This report presents design principles and algorithms for building a real-time scheduler of arrival aircraft based on a first-come-first-served (FCFS) scheduling protocol. The algorithms provide the conceptual and computational foundation for the Traffic Management Advisor (TMA) of the Center/terminal radar approach control facilities (TRACON) automation system, which comprises a set of decision support tools for managing arrival traffic at major airports in the United States. The primary objective of the scheduler is to assign arrival aircraft to a favorable landing runway and schedule them to land at times that minimize delays. A further objective of the scheduler is to allocate delays between high-altitude airspace far away from the airport and low-altitude airspace near the airport. A method of delay allocation is described that minimizes the average operating cost in the presence of errors in controlling aircraft to a specified landing time. This report is a revision of an earlier paper first presented as part of an Advisory Group for Aerospace Research and Development (AGARD) lecture series in September 1995. The authors, during vigorous discussions over the details of this paper, felt it was important to the air-trafficmanagement (ATM) community to revise and extend the original 1995 paper, providing more detail and clarity and thereby allowing future researchers to understand this foundational work as the basis for the TMA's scheduling algorithms.

A quantitative model for designing keyboard layout.

PubMed

Shieh, K K; Lin, C C

1999-02-01

This study analyzed the quantitative relationship between keytapping times and ergonomic principles in typewriting skills. Keytapping times and key-operating characteristics of a female subject typing on the Qwerty and Dvorak keyboards for six weeks each were collected and analyzed. The results showed that characteristics of the typed material and the movements of hands and fingers were significantly related to keytapping times. The most significant factors affecting keytapping times were association frequency between letters, consecutive use of the same hand or finger, and the finger used. A regression equation for relating keytapping times to ergonomic principles was fitted to the data. Finally, a protocol for design of computerized keyboard layout based on the regression equation was proposed.

Pharmaceutical product development: A quality by design approach

PubMed Central

Pramod, Kannissery; Tahir, M. Abu; Charoo, Naseem A.; Ansari, Shahid H.; Ali, Javed

2016-01-01

The application of quality by design (QbD) in pharmaceutical product development is now a thrust area for the regulatory authorities and the pharmaceutical industry. International Conference on Harmonization and United States Food and Drug Administration (USFDA) emphasized the principles and applications of QbD in pharmaceutical development in their guidance for the industry. QbD attributes are addressed in question-based review, developed by USFDA for chemistry, manufacturing, and controls section of abbreviated new drug applications. QbD principles, when implemented, lead to a successful product development, subsequent prompt regulatory approval, reduce exhaustive validation burden, and significantly reduce post-approval changes. The key elements of QbD viz., target product quality profile, critical quality attributes, risk assessments, design space, control strategy, product lifecycle management, and continual improvement are discussed to understand the performance of dosage forms within design space. Design of experiments, risk assessment tools, and process analytical technology are also discussed for their role in QbD. This review underlines the importance of QbD in inculcating science-based approach in pharmaceutical product development. PMID:27606256

Pharmaceutical product development: A quality by design approach.

PubMed

Pramod, Kannissery; Tahir, M Abu; Charoo, Naseem A; Ansari, Shahid H; Ali, Javed

2016-01-01

The application of quality by design (QbD) in pharmaceutical product development is now a thrust area for the regulatory authorities and the pharmaceutical industry. International Conference on Harmonization and United States Food and Drug Administration (USFDA) emphasized the principles and applications of QbD in pharmaceutical development in their guidance for the industry. QbD attributes are addressed in question-based review, developed by USFDA for chemistry, manufacturing, and controls section of abbreviated new drug applications. QbD principles, when implemented, lead to a successful product development, subsequent prompt regulatory approval, reduce exhaustive validation burden, and significantly reduce post-approval changes. The key elements of QbD viz., target product quality profile, critical quality attributes, risk assessments, design space, control strategy, product lifecycle management, and continual improvement are discussed to understand the performance of dosage forms within design space. Design of experiments, risk assessment tools, and process analytical technology are also discussed for their role in QbD. This review underlines the importance of QbD in inculcating science-based approach in pharmaceutical product development.

Overcoming Navigational Design in a VLE: Students as Agents of Change

ERIC Educational Resources Information Center

Sadoux, Marion; Rzycka, Dorota; Jones, Mizuho; Lopez, Joaquin

2016-01-01

This paper focuses on the outcomes of a project funded by the Teaching and Learning Enhancement Office at the University of Nottingham Ningbo China (UNNC). Students were recruited to design a new navigational architecture for the Moodle pages of the Language Centre. They received some training on the key principles of distributive learning and…

Key parameters design of an aerial target detection system on a space-based platform

NASA Astrophysics Data System (ADS)

Zhu, Hanlu; Li, Yejin; Hu, Tingliang; Rao, Peng

2018-02-01

To ensure flight safety of an aerial aircraft and avoid recurrence of aircraft collisions, a method of multi-information fusion is proposed to design the key parameter to realize aircraft target detection on a space-based platform. The key parameters of a detection wave band and spatial resolution using the target-background absolute contrast, target-background relative contrast, and signal-to-clutter ratio were determined. This study also presented the signal-to-interference ratio for analyzing system performance. Key parameters are obtained through the simulation of a specific aircraft. And the simulation results show that the boundary ground sampling distance is 30 and 35 m in the mid- wavelength infrared (MWIR) and long-wavelength infrared (LWIR) bands for most aircraft detection, and the most reasonable detection wavebands is 3.4 to 4.2 μm and 4.35 to 4.5 μm in the MWIR bands, and 9.2 to 9.8 μm in the LWIR bands. We also found that the direction of detection has a great impact on the detection efficiency, especially in MWIR bands.

Design principles for electrolytes and interfaces for stable lithium-metal batteries

NASA Astrophysics Data System (ADS)

Tikekar, Mukul D.; Choudhury, Snehashis; Tu, Zhengyuan; Archer, Lynden A.

2016-09-01

The future of electrochemical energy storage hinges on the advancement of science and technology that enables rechargeable batteries that utilize reactive metals as anodes. With specific capacity more than ten times that of the LiC6 anode used in present-day lithium-ion batteries, cells based on Li-metal anodes are of particular interest. Effective strategies for stabilizing the anode in such cells are now understood to be a requirement for progress on exceptional storage technologies, including Li-S and Li-O2 batteries. Multiple challenges—parasitic reactions of Li-metal with liquid electrolytes, unstable and dendritic electrodeposition, and dendrite-induced short circuits—derailed early efforts to commercialize such lithium-metal batteries. Here we consider approaches for rationally designing electrolytes and Li-metal/electrolyte interfaces for stable, dendrite-free operation of lithium-metal batteries. On the basis of fundamental understanding of the failure modes of reactive metal anodes, we discuss the key variables that govern the stability of electrodeposition at the Li anode and propose a universal framework for designing stable electrolytes and interfaces for lithium-metal batteries.

Synergy as design principle for metabolic engineering of 1-propanol production in Escherichia coli.

PubMed

Shen, Claire R; Liao, James C

2013-05-01

Synthesis of a desired product can often be achieved via more than one metabolic pathway. Whether naturally evolved or synthetically engineered, these pathways often exhibit specific properties that are suitable for production under distinct conditions and host organisms. Synergy between pathways arises when the underlying pathway characteristics, such as reducing equivalent demand, ATP requirement, intermediate utilization, and cofactor preferences, are complementary to each other. Utilization of such pathways in combination leads to an increased metabolite productivity and/or yield compared to using each pathway alone. This work illustrates the principle of synergy between two different pathways for 1-propanol production in Escherichia coli. A model-guided design based on maximum theoretical yield calculations identified synergy of the native threonine pathway and the heterologous citramalate pathway in terms of production yield across all flux ratios between the two pathways. Characterization of the individual pathways by host gene deletions demonstrates their distinct metabolic characteristics: the necessity of TCA cycle for threonine pathway and the independence of TCA cycle for the citramalate pathway. The two pathways are also complementary in driving force demands. Production experiments verified the synergistic effects predicted by the yield model, in which the platform with dual pathway for 2-ketobutyrate synthesis achieved higher yield (0.15g/g of glucose) and productivity (0.12g/L/h) of 1-propanol than individual ones alone: the threonine pathway (0.09g/g; 0.04g/L/h) or the citramalate pathway (0.11g/g; 0.04g/L/h). Thus, incorporation of synergy into the design principle of metabolic engineering may improve the production yield and rate of the desired compound. Copyright © 2013 Elsevier Inc. All rights reserved.

The Promise and Challenge of Practice-Research Collaborations: Guiding Principles and Strategies for Initiating, Designing, and Implementing Program Evaluation Research

ERIC Educational Resources Information Center

Secret, Mary; Abell, Melissa L.; Berlin, Trey

2011-01-01

The authors present a set of guiding principles and strategies to facilitate the collaborative efforts of social work researchers and practitioners as they initiate, design, and implement outcome evaluations of human service interventions and programs. Beginning with an exploration of the interpersonal barriers to practice-research collaborations,…

Fully device-independent conference key agreement

NASA Astrophysics Data System (ADS)

Ribeiro, Jérémy; Murta, Gláucia; Wehner, Stephanie

2018-02-01

We present a security analysis of conference key agreement (CKA) in the most adversarial model of device independence (DI). Our protocol can be implemented by any experimental setup that is capable of performing Bell tests [specifically, the Mermin-Ardehali-Belinskii-Klyshko (MABK) inequality], and security can in principle be obtained for any violation of the MABK inequality that detects genuine multipartite entanglement among the N parties involved in the protocol. As our main tool, we derive a direct physical connection between the N -partite MABK inequality and the Clauser-Horne-Shimony-Holt (CHSH) inequality, showing that certain violations of the MABK inequality correspond to a violation of the CHSH inequality between one of the parties and the other N -1 . We compare the asymptotic key rate for device-independent conference key agreement (DICKA) to the case where the parties use N -1 device-independent quantum key distribution protocols in order to generate a common key. We show that for some regime of noise the DICKA protocol leads to better rates.