Performance Measurement for Public Services in Academic and Research Libraries. Occasional Paper Number #9.

ERIC Educational Resources Information Center

Cronin, Mary J.

This paper defines performance measurement as the clarification of objectives and standards, identification of key activities, data collection and analysis, and formative evaluation of services. It then examines some of the factors involved in using performance measurement to evaluate public services activities, and analyzes performance…

Biased decoy-state measurement-device-independent quantum cryptographic conferencing with finite resources.

PubMed

Chen, RuiKe; Bao, WanSu; Zhou, Chun; Li, Hongwei; Wang, Yang; Bao, HaiZe

2016-03-21

In recent years, a large quantity of work have been done to narrow the gap between theory and practice in quantum key distribution (QKD). However, most of them are focus on two-party protocols. Very recently, Yao Fu et al proposed a measurement-device-independent quantum cryptographic conferencing (MDI-QCC) protocol and proved its security in the limit of infinitely long keys. As a step towards practical application for MDI-QCC, we design a biased decoy-state measurement-device-independent quantum cryptographic conferencing protocol and analyze the performance of the protocol in both the finite-key and infinite-key regime. From numerical simulations, we show that our decoy-state analysis is tighter than Yao Fu et al. That is, we can achieve the nonzero asymptotic secret key rate in long distance with approximate to 200km and we also demonstrate that with a finite size of data (say 10¹¹ to 10¹³ signals) it is possible to perform secure MDI-QCC over reasonable distances.

Quantifying Faculty Productivity in Japan: Development and Application of the Achievement-Motivated Key Performance Indicator. Research & Occasional Paper Series: CSHE.8.16

ERIC Educational Resources Information Center

Aida, Misako; Watanabe, Satoshi P.

2016-01-01

Universities throughout the world are trending toward more performance based methods to capture their strengths, weaknesses and productivity. Hiroshima University has developed an integrated objective measure for quantifying multifaceted faculty activities, namely the "Achievement-Motivated Key Performance Indicator" (A-KPI), in order to…

Notes on a Continuous-Variable Quantum Key Distribution Scheme

NASA Astrophysics Data System (ADS)

Ichikawa, Tsubasa; Hirano, Takuya; Matsubara, Takuto; Ono, Motoharu; Namiki, Ryo

2017-09-01

We develop a physical model to describe the signal transmission for a continuous-variable quantum key distribution scheme and investigate its security against a couple of eavesdropping attacks assuming that the eavesdropper's power is partly restricted owing to today's technological limitations. We consider an eavesdropper performing quantum optical homodyne measurement on the signal obtained by a type of beamsplitting attack. We also consider the case in which the eavesdropper Eve is unable to access a quantum memory and she performs heterodyne measurement on her signal without performing a delayed measurement. Our formulation includes a model in which the receiver's loss and noise are unaccessible by the eavesdropper. This setup enables us to investigate the condition that Eve uses a practical fiber differently from the usual beamsplitting attack where she can deploy a lossless transmission channel. The secret key rates are calculated in both the direct and reverse reconciliation scenarios.

Performance indicators: healthcare professionals' views.

PubMed

Gu, Xiuzhu; Itoh, Kenji

2016-08-08

Purpose - The purpose of this paper is to capture factors behind professional views of indicator usefulness as a common structure for assessing healthcare performance and their important characteristics to design limited key performance indicators (PIs) for holistic hospital management. Design/methodology/approach - Two surveys were conducted using self-administered questionnaires, in which hospital manager/staff respondents were asked to rate the 52 PIs' usefulness. In total, 228 manager and 894 staff responses were collected. Findings - Eight factors were elicited from manager and staff responses as performance measures with 72 percent cumulative variance accounted for. Hospital managers and staff showed similar performance measure perceptions: high-utility acknowledgment on safety, operational efficiency and patient/employee satisfaction but relatively low-employee development concerns. Manager indicator usefulness perceptions were rather homogeneous and significantly higher than staff for almost all performance measures. Practical implications - Homogeneous manager views mean that a single key PI set for hospital management may be established regardless of hospital attributes. The following aspects may be measures that should be managed in a healthcare organization based on their key PIs: patient/employee safety, operational efficiency, financial effectiveness and patient/employee satisfaction. Originality/value - This is a pilot study on hospital management PIs in Japan. The eight-dimensional factor structure and findings about healthcare provider perceptions may be useful for healthcare management.

Promoting Accountability and Continual Improvement: A Review of the Respective Roles of Performance Measurement, Auditing, Evaluation, and Reporting.

ERIC Educational Resources Information Center

Reid, William

1999-01-01

Provides a synthesis of the literature pertaining to the principles and practices of performance measurement, auditing, evaluation, and reporting. Discusses how bringing these elements together in a performance management system can be achieved through refinement of strategic direction, reporting on key measures, and periodic, systematic…

Device Performance | Photovoltaic Research | NREL

Science.gov Websites

Device Performance Device Performance PV Calibrations Blog Check out the latest updates from the PV than 190 person-years. Capabilities Our capabilities for measuring key performance parameters of solar cells and modules include the use of various solar simulators and tools to measure current-voltage and

Differentiation and Exploration of Model MACP for HE VER 1.0 on Prototype Performance Measurement Application for Higher Education

NASA Astrophysics Data System (ADS)

El Akbar, R. Reza; Anshary, Muhammad Adi Khairul; Hariadi, Dennis

2018-02-01

Model MACP for HE ver.1. Is a model that describes how to perform measurement and monitoring performance for Higher Education. Based on a review of the research related to the model, there are several parts of the model component to develop in further research, so this research has four main objectives. The first objective is to differentiate the CSF (critical success factor) components in the previous model, the two key KPI (key performance indicators) exploration in the previous model, the three based on the previous objective, the new and more detailed model design. The final goal is the fourth designed prototype application for performance measurement in higher education, based on a new model created. The method used is explorative research method and application design using prototype method. The results of this study are first, forming a more detailed new model for measurement and monitoring of performance in higher education, differentiation and exploration of the Model MACP for HE Ver.1. The second result compiles a dictionary of college performance measurement by re-evaluating the existing indicators. The third result is the design of prototype application of performance measurement in higher education.

Public perceptions of key performance indicators of healthcare in Alberta, Canada.

PubMed

Northcott, Herbert C; Harvey, Michael D

2012-06-01

To examine the relationship between public perceptions of key performance indicators assessing various aspects of the health-care system. Cross-sequential survey research. Annual telephone surveys of random samples of adult Albertans selected by random digit dialing and stratified according to age, sex and region (n = 4000 for each survey year). The survey questionnaires included single-item measures of key performance indicators to assess public perceptions of availability, accessibility, quality, outcome and satisfaction with healthcare. Cronbach's α and factor analysis were used to assess the relationship between key performance indicators focusing on the health-care system overall and on a recent interaction with the health-care system. The province of Alberta, Canada during the years 1996-2004. Four thousand adults randomly selected each survey year. Survey questions measuring public perceptions of healthcare availability, accessibility, quality, outcome and satisfaction with healthcare. Factor analysis identified two principal components with key performance indicators focusing on the health system overall loading most strongly on the first component and key performance indicators focusing on the most recent health-care encounter loading most strongly on the second component. Assessments of the quality of care most recently received, accessibility of that care and perceived outcome of care tended to be higher than the more general assessments of overall health system quality and accessibility. Assessments of specific health-care encounters and more general assessments of the overall health-care system, while related, nevertheless comprise separate dimensions for health-care evaluation.

Collective attacks and unconditional security in continuous variable quantum key distribution.

PubMed

Grosshans, Frédéric

2005-01-21

We present here an information theoretic study of Gaussian collective attacks on the continuous variable key distribution protocols based on Gaussian modulation of coherent states. These attacks, overlooked in previous security studies, give a finite advantage to the eavesdropper in the experimentally relevant lossy channel, but are not powerful enough to reduce the range of the reverse reconciliation protocols. Secret key rates are given for the ideal case where Bob performs optimal collective measurements, as well as for the realistic cases where he performs homodyne or heterodyne measurements. We also apply the generic security proof of Christiandl et al. to obtain unconditionally secure rates for these protocols.

From big data to rich data: The key features of athlete wheelchair mobility performance.

PubMed

van der Slikke, R M A; Berger, M A M; Bregman, D J J; Veeger, H E J

2016-10-03

Quantitative assessment of an athlete׳s individual wheelchair mobility performance is one prerequisite needed to evaluate game performance, improve wheelchair settings and optimize training routines. Inertial Measurement Unit (IMU) based methods can be used to perform such quantitative assessment, providing a large number of kinematic data. The goal of this research was to reduce that large amount of data to a set of key features best describing wheelchair mobility performance in match play and present them in meaningful way for both scientists and athletes. To test the discriminative power, wheelchair mobility characteristics of athletes with different performance levels were compared. The wheelchair kinematics of 29 (inter-)national level athletes were measured during a match using three inertial sensors mounted on the wheelchair. Principal component analysis was used to reduce 22 kinematic outcomes to a set of six outcomes regarding linear and rotational movement; speed and acceleration; average and best performance. In addition, it was explored whether groups of athletes with known performance differences based on their impairment classification also differed with respect to these key outcomes using univariate general linear models. For all six key outcomes classification showed to be a significant factor (p<0.05). We composed a set of six key kinematic outcomes that accurately describe wheelchair mobility performance in match play. The key kinematic outcomes were displayed in an easy to interpret way, usable for athletes, coaches and scientists. This standardized representation enables comparison of different wheelchair sports regarding wheelchair mobility, but also evaluation at the level of an individual athlete. By this means, the tool could enhance further development of wheelchair sports in general. Copyright © 2016 Elsevier Ltd. All rights reserved.

What Value "Value Added"?

ERIC Educational Resources Information Center

Richards, Andrew

2015-01-01

Two quantitative measures of school performance are currently used, the average points score (APS) at Key Stage 2 and value-added (VA), which measures the rate of academic improvement between Key Stage 1 and 2. These figures are used by parents and the Office for Standards in Education to make judgements and comparisons. However, simple…

Establishing and integrating performance measures : a TPCB peer exchange

DOT National Transportation Integrated Search

2015-08-31

This report highlights key recommendations and noteworthy practices identified at Establishing and Integrating Performance Measures Peer Exchange held on April 27-28, 2015 in Dimondale, Michigan and via video teleconference. This event was spon...

Using the balanced scorecard to measure Chinese and Japanese hospital performance.

PubMed

Chen, Xiao-yun; Yamauchi, Kazunobu; Kato, Ken; Nishimura, Akio; Ito, Katuski

2006-01-01

The objective of the paper is to confirm the feasibility and value of using the balanced scorecard (BSC) to measure performance in two hospitals in different countries. One hospital from China and another from Japan were chosen and key indicators were selected according to the BSC framework. A comparative hospital performance measurement model was set up using the BSC framework to comprehensively compare hospital performance in two countries. The BSC was found to be effective for underlining existing problems and identifying opportunities for improvements. The BSC also revealed the hospitals' contribution to performance improvement of each country's total health system. Hospital performance comparisons between countries using the BSC depend on the selection of feasible and appropriate key performance indicators, which is occasionally limited by data collection problems. The first use of the BSC to compare hospital performance between China and Japan shows benefits that not only suggests performance improvements in individual hospitals but also reveals effective health factors allowing implementation of valid national health policies.

Development of balanced key performance indicators for emergency departments strategic dashboards following analytic hierarchical process.

PubMed

Safdari, Reza; Ghazisaeedi, Marjan; Mirzaee, Mahboobeh; Farzi, Jebrail; Goodini, Azadeh

2014-01-01

Dynamic reporting tools, such as dashboards, should be developed to measure emergency department (ED) performance. However, choosing an effective balanced set of performance measures and key performance indicators (KPIs) is a main challenge to accomplish this. The aim of this study was to develop a balanced set of KPIs for use in ED strategic dashboards following an analytic hierarchical process. The study was carried out in 2 phases: constructing ED performance measures based on balanced scorecard perspectives and incorporating them into analytic hierarchical process framework to select the final KPIs. The respondents placed most importance on ED internal processes perspective especially on measures related to timeliness and accessibility of care in ED. Some measures from financial, customer, and learning and growth perspectives were also selected as other top KPIs. Measures of care effectiveness and care safety were placed as the next priorities too. The respondents placed least importance on disease-/condition-specific "time to" measures. The methodology can be presented as a reference model for development of KPIs in various performance related areas based on a consistent and fair approach. Dashboards that are designed based on such a balanced set of KPIs will help to establish comprehensive performance measurements and fair benchmarks and comparisons.

Continuous Variable Quantum Key Distribution Using Polarized Coherent States

NASA Astrophysics Data System (ADS)

Vidiella-Barranco, A.; Borelli, L. F. M.

We discuss a continuous variables method of quantum key distribution employing strongly polarized coherent states of light. The key encoding is performed using the variables known as Stokes parameters, rather than the field quadratures. Their quantum counterpart, the Stokes operators Ŝi (i=1,2,3), constitute a set of non-commuting operators, being the precision of simultaneous measurements of a pair of them limited by an uncertainty-like relation. Alice transmits a conveniently modulated two-mode coherent state, and Bob randomly measures one of the Stokes parameters of the incoming beam. After performing reconciliation and privacy amplification procedures, it is possible to distill a secret common key. We also consider a non-ideal situation, in which coherent states with thermal noise, instead of pure coherent states, are used for encoding.

Using system-of-systems simulation modeling and analysis to measure energy KPP impacts for brigade combat team missions.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lawton, Craig R.; Welch, Kimberly M.; Kerper, Jessica

2010-06-01

The Department of Defense's (DoD) Energy Posture identified dependence of the US Military on fossil fuel energy as a key issue facing the military. Inefficient energy consumption leads to increased costs, effects operational performance and warfighter protection through large and vulnerable logistics support infrastructures. Military's use of energy is a critical national security problem. DoD's proposed metrics Fully Burdened Cost of Fuel and Energy Efficiency Key Performance Parameter (FBCF and Energy KPP) are a positive step to force energy use accountability onto Military programs. The ability to measure impacts of sustainment are required to fully measure Energy KPP. Sandia's workmore » with Army demonstrates the capability to measure performance which includes energy constraint.« less

Delay and cost performance analysis of the diffie-hellman key exchange protocol in opportunistic mobile networks

NASA Astrophysics Data System (ADS)

Soelistijanto, B.; Muliadi, V.

2018-03-01

Diffie-Hellman (DH) provides an efficient key exchange system by reducing the number of cryptographic keys distributed in the network. In this method, a node broadcasts a single public key to all nodes in the network, and in turn each peer uses this key to establish a shared secret key which then can be utilized to encrypt and decrypt traffic between the peer and the given node. In this paper, we evaluate the key transfer delay and cost performance of DH in opportunistic mobile networks, a specific scenario of MANETs where complete end-to-end paths rarely exist between sources and destinations; consequently, the end-to-end delays in these networks are much greater than typical MANETs. Simulation results, driven by a random node movement model and real human mobility traces, showed that DH outperforms a typical key distribution scheme based on the RSA algorithm in terms of key transfer delay, measured by average key convergence time; however, DH performs as well as the benchmark in terms of key transfer cost, evaluated by total key (copies) forwards.

Approaches for Combining Multiple Measures of Teacher Performance: Reliability, Validity, and Implications for Evaluation Policy

ERIC Educational Resources Information Center

Martínez, José Felipe; Schweig, Jonathan; Goldschmidt, Pete

2016-01-01

A key question facing teacher evaluation systems is how to combine multiple measures of complex constructs into composite indicators of performance. We use data from the Measures of Effective Teaching (MET) study to investigate the measurement properties of composite indicators obtained under various conjunctive, disjunctive (or complementary),…

Examining financial performance indicators for acute care hospitals.

PubMed

Burkhardt, Jeffrey H; Wheeler, John R C

2013-01-01

Measuring financial performance in acute care hospitals is a challenge for those who work daily with financial information. Because of the many ways to measure financial performance, financial managers and researchers must decide which measures are most appropriate. The difficulty is compounded for the non-finance person. The purpose of this article is to clarify key financial concepts and describe the most common measures of financial performance so that researchers and managers alike may understand what is being measured by various financial ratios.

Finite-key analysis for measurement-device-independent quantum key distribution.

PubMed

Curty, Marcos; Xu, Feihu; Cui, Wei; Lim, Charles Ci Wen; Tamaki, Kiyoshi; Lo, Hoi-Kwong

2014-04-29

Quantum key distribution promises unconditionally secure communications. However, as practical devices tend to deviate from their specifications, the security of some practical systems is no longer valid. In particular, an adversary can exploit imperfect detectors to learn a large part of the secret key, even though the security proof claims otherwise. Recently, a practical approach--measurement-device-independent quantum key distribution--has been proposed to solve this problem. However, so far its security has only been fully proven under the assumption that the legitimate users of the system have unlimited resources. Here we fill this gap and provide a rigorous security proof against general attacks in the finite-key regime. This is obtained by applying large deviation theory, specifically the Chernoff bound, to perform parameter estimation. For the first time we demonstrate the feasibility of long-distance implementations of measurement-device-independent quantum key distribution within a reasonable time frame of signal transmission.

Passive measurement-device-independent quantum key distribution with orbital angular momentum and pulse position modulation

NASA Astrophysics Data System (ADS)

Wang, Lian; Zhou, Yuan-yuan; Zhou, Xue-jun; Chen, Xiao

2018-03-01

Based on the orbital angular momentum and pulse position modulation, we present a novel passive measurement-device-independent quantum key distribution (MDI-QKD) scheme with the two-mode source. Combining with the tight bounds of the yield and error rate of single-photon pairs given in our paper, we conduct performance analysis on the scheme with heralded single-photon source. The numerical simulations show that the performance of our scheme is significantly superior to the traditional MDI-QKD in the error rate, key generation rate and secure transmission distance, since the application of orbital angular momentum and pulse position modulation can exclude the basis-dependent flaw and increase the information content for each single photon. Moreover, the performance is improved with the rise of the frame length. Therefore, our scheme, without intensity modulation, avoids the source side channels and enhances the key generation rate. It has greatly utility value in the MDI-QKD setups.

Key performance outcomes of patient safety curricula: root cause analysis, failure mode and effects analysis, and structured communications skills.

PubMed

Fassett, William E

2011-10-10

As colleges and schools of pharmacy develop core courses related to patient safety, course-level outcomes will need to include both knowledge and performance measures. Three key performance outcomes for patient safety coursework, measured at the course level, are the ability to perform root cause analyses and healthcare failure mode effects analyses, and the ability to generate effective safety communications using structured formats such as the Situation-Background-Assessment-Recommendation (SBAR) situational briefing model. Each of these skills is widely used in patient safety work and competence in their use is essential for a pharmacist's ability to contribute as a member of a patient safety team.

Expert opinions and scientific evidence for colonoscopy key performance indicators.

PubMed

Rees, Colin J; Bevan, Roisin; Zimmermann-Fraedrich, Katharina; Rutter, Matthew D; Rex, Douglas; Dekker, Evelien; Ponchon, Thierry; Bretthauer, Michael; Regula, Jaroslaw; Saunders, Brian; Hassan, Cesare; Bourke, Michael J; Rösch, Thomas

2016-12-01

Colonoscopy is a widely performed procedure with procedural volumes increasing annually throughout the world. Many procedures are now performed as part of colorectal cancer screening programmes. Colonoscopy should be of high quality and measures of this quality should be evidence based. New UK key performance indicators and quality assurance standards have been developed by a working group with consensus agreement on each standard reached. This paper reviews the scientific basis for each of the quality measures published in the UK standards. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/.

Multi-party Measurement-Device-Independent Quantum Key Distribution Based on Cluster States

NASA Astrophysics Data System (ADS)

Liu, Chuanqi; Zhu, Changhua; Ma, Shuquan; Pei, Changxing

2018-03-01

We propose a novel multi-party measurement-device-independent quantum key distribution (MDI-QKD) protocol based on cluster states. A four-photon analyzer which can distinguish all the 16 cluster states serves as the measurement device for four-party MDI-QKD. Any two out of four participants can build secure keys after the analyzers obtains successful outputs and the two participants perform post-processing. We derive a security analysis for the protocol, and analyze the key rates under different values of polarization misalignment. The results show that four-party MDI-QKD is feasible over 280 km in the optical fiber channel when the key rate is about 10- 6 with the polarization misalignment parameter 0.015. Moreover, our work takes an important step toward a quantum communication network.

KEY COMPARISON Final report on international comparison CCQM-K71: Measurement of stack gas

NASA Astrophysics Data System (ADS)

Nieuwenkamp, G.; van der Veen, A. M. H.; Wessel, R. M.; Qiao, Han; Oh, Sang-Hyub; Kim, Byung-Moon; Kim, Kwang-Sub; Pérez Castorena, Alejandro; Ramírez Nambo, Carlos; Koelliker Delgado, Jorge; Serrano Caballero, Victor M.; Rangel Murillo, Francisco; Avila Salas, Manuel de Jesus; Dias, Florbela; Baptista, Gonçalo; Konopelko, L. A.; Kustikov, Y. A.; Pankratov, V. V.; Selyukov, D. N.; Balandovich, V. S.; Vishnyakov, I. M.; Pavlov, M. V.; Maltsev, M. A.; Botha, Angelique; Valkova, Miroslava; Stovcik, Viliam; Musil, Stanislav; Milton, M. J. T.; Uprichard, I. J.; Vargha, G. M.; Guenther, F.; Gameson, L.; da Cunha, V.

2010-01-01

Industrial stack gas emission measurements are important for process control, control of air pollution, and for implementing legislation regarding carbon dioxide emission rights. Measurements are typically performed using a range of process analysers for carbon monoxide (CO), carbon dioxide (CO2), nitrogen oxides (NOx), sulphur dioxide (SO2) and miscellaneous hydrocarbons. The calibration of these analysers is often performed using a series of binary mixtures of each component in nitrogen. For reasons of efficiency as well as a better match with true stack gas, the use of multi-component mixtures for this purpose would be preferred. The aim of this key comparison is to evaluate the measurement capabilities of national metrology institutes for carbon monoxide, carbon dioxide, nitrogen monoxide, sulphur dioxide and propane in nitrogen. Ten laboratories participated in the key comparison and one in the associated study. The key comparison reference value is based on the gravimetric preparation data. Main text. To reach the main text of this paper, click on Final Report. Note that this text is that which appears in Appendix B of the BIPM key comparison database kcdb.bipm.org/. The final report has been peer-reviewed and approved for publication by the CCQM, according to the provisions of the CIPM Mutual Recognition Arrangement (MRA).

Multi-party quantum key agreement with five-qubit brown states

NASA Astrophysics Data System (ADS)

Cai, Tao; Jiang, Min; Cao, Gang

2018-05-01

In this paper, we propose a multi-party quantum key agreement protocol with five-qubit brown states and single-qubit measurements. Our multi-party protocol ensures each participant to contribute equally to the agreement key. Each party performs three single-qubit unitary operations on three qubits of each brown state. Finally, by measuring brown states and decoding the measurement results, all participants can negotiate a shared secret key without classical bits exchange between them. With the analysis of security, our protocol demonstrates that it can resist against both outsider and participant attacks. Compared with other schemes, it also possesses a higher information efficiency. In terms of physical operation, it requires single-qubit measurements only which weakens the hardware requirements of participant and has a better operating flexibility.

Two-party quantum key agreement with five-particle entangled states

NASA Astrophysics Data System (ADS)

He, Ye-Feng; Ma, Wen-Ping

A two-party quantum key agreement protocol is proposed with five-particle entangled states and the delayed measurement technique. According to the measurement correlation property of five-particle entangled states, two participants can deduce the measurement results of each other’s initial quantum states. As a result, two parties can extract the secret keys of each other by using the publicly announced value or by performing the delayed measurement, respectively. Thus, a shared key is fairly established. Since each particle is transmitted only once in quantum channel, the protocol is congenitally free from the Trojan horse attacks. It is shown that the protocol not only is secure against both participant and outsider attacks but also has no information leakage problem. Moreover, it has high qubit efficiency.

Lean Information Management: Criteria For Selecting Key Performance Indicators At Shop Floor

NASA Astrophysics Data System (ADS)

Iuga, Maria Virginia; Kifor, Claudiu Vasile; Rosca, Liviu-Ion

2015-07-01

Most successful organizations worldwide use key performance indicators as an important part of their corporate strategy in order to forecast, measure and plan their businesses. Performance metrics vary in their purpose, definition and content. Therefore, the way organizations select what they think are the optimal indicators for their businesses varies from company to company, sometimes even from department to department. This study aims to answer the question of what is the most suitable way to define and select key performance indicators. More than that, it identifies the right criteria to select key performance indicators at shop floor level. This paper contributes to prior research by analysing and comparing previously researched selection criteria and proposes an original six-criteria-model, which caters towards choosing the most adequate KPIs. Furthermore, the authors take the research a step further by further steps to closed research gaps within this field of study.

Multidimensional evaluation of performance with experimental application of balanced scorecard: a two year experience

PubMed Central

2011-01-01

Background In today's dynamic health-care system, organizations such as hospitals are required to improve their performance for multiple stakeholders and deliver an integrated care that means to work effectively, be innovative and organize efficiently. Achieved goals and levels of quality can be successfully measured by a multidimensional approach like Balanced Scorecard (BSC). The aim of the study was to verify the opportunity to introduce BSC framework to measure performance in St. Anna University Hospital of Ferrara, applying it to the Clinical Laboratory Operative Unit in order to compare over time performance results and achievements of assigned targets. Methods In the first experience with BSC we distinguished four perspectives, according to Kaplan and Norton, identified Key Performance Areas and Key Performance Indicators, set standards and weights for each objective, collected data for all indicators, recognized cause-and-effect relationships in a strategic map. One year later we proceeded with the next data collection and analysed the preservation of framework aptitude to measure Operative Unit performance. In addition, we verified the ability to underline links between strategic actions belonging to different perspectives in producing outcomes changes. Results The BSC was found to be effective for underlining existing problems and identifying opportunities for improvements. The BSC also revealed the specific perspective contribution to overall performance enhancement. After time results comparison was possible depending on the selection of feasible and appropriate key performance indicators, which was occasionally limited by data collection problems. Conclusions The first use of BSC to compare performance at Operative Unit level, in course of time, suggested this framework can be successfully adopted for results measuring and revealing effective health factors, allowing health-care quality improvements. PMID:21586111

Multidimensional evaluation of performance with experimental application of balanced scorecard: a two year experience.

PubMed

Lupi, Silvia; Verzola, Adriano; Carandina, Gianni; Salani, Manuela; Antonioli, Paola; Gregorio, Pasquale

2011-05-17

In today's dynamic health-care system, organizations such as hospitals are required to improve their performance for multiple stakeholders and deliver an integrated care that means to work effectively, be innovative and organize efficiently. Achieved goals and levels of quality can be successfully measured by a multidimensional approach like Balanced Scorecard (BSC). The aim of the study was to verify the opportunity to introduce BSC framework to measure performance in St. Anna University Hospital of Ferrara, applying it to the Clinical Laboratory Operative Unit in order to compare over time performance results and achievements of assigned targets. In the first experience with BSC we distinguished four perspectives, according to Kaplan and Norton, identified Key Performance Areas and Key Performance Indicators, set standards and weights for each objective, collected data for all indicators, recognized cause-and-effect relationships in a strategic map. One year later we proceeded with the next data collection and analysed the preservation of framework aptitude to measure Operative Unit performance. In addition, we verified the ability to underline links between strategic actions belonging to different perspectives in producing outcomes changes. The BSC was found to be effective for underlining existing problems and identifying opportunities for improvements. The BSC also revealed the specific perspective contribution to overall performance enhancement. After time results comparison was possible depending on the selection of feasible and appropriate key performance indicators, which was occasionally limited by data collection problems. The first use of BSC to compare performance at Operative Unit level, in course of time, suggested this framework can be successfully adopted for results measuring and revealing effective health factors, allowing health-care quality improvements.

FY 2016 Annual Performance Report

EPA Pesticide Factsheets

Presents detailed performance results, as measured against the targets established in EPA’s FY 2016 Annual Plan and Budget. The Executive Overview section analyzes key performance outcomes and links to FY 2016 program evaluations.

FY 2017 Annual Performance Report (APR)

EPA Pesticide Factsheets

Presents detailed performance results, as measured against the targets established in EPA’s FY 2017 Annual Plan and Budget. The Executive Overview section analyzes key performance outcomes and links to FY 2017 program evaluations.

FY 2015 Annual Performance Report

EPA Pesticide Factsheets

Presents detailed performance results, as measured against the targets established in EPA’s FY 2015 Annual Plan and Budget. The Executive Overview section analyzes key performance outcomes and links to FY 2015 program evaluations.

The Sentinel-4 detectors: architecture and performance

NASA Astrophysics Data System (ADS)

Skegg, Michael P.; Hermsen, Markus; Hohn, Rüdiger; Williges, Christian; Woffinden, Charles; Levillain, Yves; Reulke, Ralf

2017-09-01

The Sentinel-4 instrument is an imaging spectrometer, developed by Airbus under ESA contract in the frame of the joint European Union (EU)/ESA COPERNICUS program. SENTINEL-4 will provide accurate measurements of trace gases from geostationary orbit, including key atmospheric constituents such as ozone, nitrogen dioxide, sulfur dioxide, formaldehyde, as well as aerosol and cloud properties. Key to achieving these atmospheric measurements are the two CCD detectors, covering the wavelengths in the ranges 305 nm to 500 nm (UVVIS) and 750 to 775 nm (NIR) respectively. The paper describes the architecture, and operation of these two CCD detectors, which have an unusually high full-well capacity and a very specific architecture and read-out sequence to match the requirements of the Sentinel- 4 instrument. The key performance aspects and their verification through measurement are presented, with a focus on an unusual, bi-modal dark signal generation rate observed during test.

Emergency department performance measures updates: proceedings of the 2014 emergency department benchmarking alliance consensus summit.

PubMed

Wiler, Jennifer L; Welch, Shari; Pines, Jesse; Schuur, Jeremiah; Jouriles, Nick; Stone-Griffith, Suzanne

2015-05-01

The objective was to review and update key definitions and metrics for emergency department (ED) performance and operations. Forty-five emergency medicine leaders convened for the Third Performance Measures and Benchmarking Summit held in Las Vegas, February 21-22, 2014. Prior to arrival, attendees were assigned to workgroups to review, revise, and update the definitions and vocabulary being used to communicate about ED performance and operations. They were provided with the prior definitions of those consensus summits that were published in 2006 and 2010. Other published definitions from key stakeholders in emergency medicine and health care were also reviewed and circulated. At the summit, key terminology and metrics were discussed and debated. Workgroups communicated online, via teleconference, and finally in a face-to-face meeting to reach consensus regarding their recommendations. Recommendations were then posted and open to a 30-day comment period. Participants then reanalyzed the recommendations, and modifications were made based on consensus. A comprehensive dictionary of ED terminology related to ED performance and operation was developed. This article includes definitions of operating characteristics and internal and external factors relevant to the stratification and categorization of EDs. Time stamps, time intervals, and measures of utilization were defined. Definitions of processes and staffing measures are also presented. Definitions were harmonized with performance measures put forth by the Centers for Medicare and Medicaid Services (CMS) for consistency. Standardized definitions are necessary to improve the comparability of EDs nationally for operations research and practice. More importantly, clear precise definitions describing ED operations are needed for incentive-based pay-for-performance models like those developed by CMS. This document provides a common language for front-line practitioners, managers, health policymakers, and researchers. © 2015 by the Society for Academic Emergency Medicine.

Quantum key distribution with an entangled light emitting diode

NASA Astrophysics Data System (ADS)

Dzurnak, B.; Stevenson, R. M.; Nilsson, J.; Dynes, J. F.; Yuan, Z. L.; Skiba-Szymanska, J.; Farrer, I.; Ritchie, D. A.; Shields, A. J.

2015-12-01

Measurements performed on entangled photon pairs shared between two parties can allow unique quantum cryptographic keys to be formed, creating secure links between users. An advantage of using such entangled photon links is that they can be adapted to propagate entanglement to end users of quantum networks with only untrusted nodes. However, demonstrations of quantum key distribution with entangled photons have so far relied on sources optically excited with lasers. Here, we realize a quantum cryptography system based on an electrically driven entangled-light-emitting diode. Measurement bases are passively chosen and we show formation of an error-free quantum key. Our measurements also simultaneously reveal Bell's parameter for the detected light, which exceeds the threshold for quantum entanglement.

Investigating General Chemistry Students' Metacognitive Monitoring of Their Exam Performance by Measuring Postdiction Accuracies over Time

ERIC Educational Resources Information Center

Hawker, Morgan J.; Dysleski, Lisa; Rickey, Dawn

2016-01-01

Metacognitive monitoring of one's own understanding plays a key role in learning. An aspect of metacognitive monitoring can be measured by comparing a student's prediction or postdiction of performance (a judgment made before or after completing the relevant task) with the student's actual performance. In this study, we investigated students'…

Measuring Perceptions of Engagement in Teamwork in Youth Development Programs

ERIC Educational Resources Information Center

Cater, Melissa; Jones, Kimberly Y.

2014-01-01

The literature regarding teamwork has supported the idea that the key to improving team performance is to understand team processes. Early work within the realm of teamwork focused on quantifiable measures of team performance, like number of products developed. The measure of a successful team hinged on whether or not the team accomplished the end…

Summary of Key Operating Statistics: Data Collected from the 2009 Annual Institutional Report

ERIC Educational Resources Information Center

Accrediting Council for Independent Colleges and Schools, 2010

2010-01-01

The Accrediting Council for Independent Colleges and Schools (ACICS) provides the Summary of Key Operating Statistics (KOS) as an annual review of the performance and key measurements of the more than 800 private post-secondary institutions we accredit. This edition of the KOS contains information based on the 2009 Annual Institutional Reports…

Total quality through computer integrated manufacturing in the pharmaceutical industry.

PubMed

Ufret, C M

1995-01-01

The role of Computer Integrated Manufacturing (CIM) in the pursue of total quality in pharmaceutical manufacturing is assessed. CIM key objectives, design criteria, and performance measurements, in addition to its scope and implementation in a hierarchical structure, are explored in detail. Key elements for the success of each phase in a CIM project and a brief status of current CIM implementations in the pharmaceutical industry are presented. The role of World Class Manufacturing performance standards and other key issues to achieve full CIM benefits are also addressed.

Development of Performance Dashboards in Healthcare Sector: Key Practical Issues.

PubMed

Ghazisaeidi, Marjan; Safdari, Reza; Torabi, Mashallah; Mirzaee, Mahboobeh; Farzi, Jebraeil; Goodini, Azadeh

2015-10-01

Static nature of performance reporting systems in health care sector has resulted in inconsistent, incomparable, time consuming, and static performance reports that are not able to transparently reflect a round picture of performance and effectively support healthcare managers' decision makings. So, the healthcare sector needs interactive performance management tools such as performance dashboards to measure, monitor, and manage performance more effectively. The aim of this article was to identify key issues that need to be addressed for developing high-quality performance dashboards in healthcare sector. A literature review was established to search electronic research databases, e-journals collections, and printed journals, books, dissertations, and theses for relevant articles. The search strategy interchangeably used the terms of "dashboard", "performance measurement system", and "executive information system" with the term of "design" combined with operator "AND". Search results (n=250) were adjusted for duplications, screened based on their abstract relevancy and full-text availability (n=147) and then assessed for eligibility (n=40). Eligible articles were included if they had explicitly focused on dashboards, performance measurement systems or executive information systems design. Finally, 28 relevant articles included in the study. Creating high-quality performance dashboards requires addressing both performance measurement and executive information systems design issues. Covering these two fields, identified contents were categorized to four main domains: KPIs development, Data Sources and data generation, Integration of dashboards to source systems, and Information presentation issues. This study implies the main steps to develop dashboards for the purpose of performance management. Performance dashboards developed on performance measurement and executive information systems principles and supported by proper back-end infrastructure will result in creation of dynamic reports that help healthcare managers to consistently measure the performance, continuously detect outliers, deeply analyze causes of poor performance, and effectively plan for the future.

National Assessment Program--Science Literacy Year 6 Technical Report, 2006

ERIC Educational Resources Information Center

Wu, Margaret; Donovan, Jenny; Hutton, Penny; Lennon, Melissa

2008-01-01

In July 2001, the Ministerial Council on Education, Employment, Training and Youth Affairs (MCEETYA) agreed to the development of assessment instruments and key performance measures for reporting on student skills, knowledge and understandings in primary science. It directed the newly established Performance Measurement and Reporting Taskforce…

National Assessment Program--Science Literacy Year 6 School Release Materials, 2006

ERIC Educational Resources Information Center

Donovan, Jenny; Hutton, Penny; Lennon, Melissa; O'Connor, Gayl; Morrissey, Noni

2008-01-01

In July 2001, the Ministerial Council on Education, Employment, Training and Youth Affairs (MCEETYA) agreed to the development of assessment instruments and key performance measures for reporting on student skills, knowledge and understandings in primary science. It directed the newly established Performance Measurement and Reporting Taskforce…

Free-space measurement-device-independent quantum-key-distribution protocol using decoy states with orbital angular momentum

NASA Astrophysics Data System (ADS)

Wang, Le; Zhao, Sheng-Mei; Gong, Long-Yan; Cheng, Wei-Wen

2015-12-01

In this paper, we propose a measurement-device-independent quantum-key-distribution (MDI-QKD) protocol using orbital angular momentum (OAM) in free space links, named the OAM-MDI-QKD protocol. In the proposed protocol, the OAM states of photons, instead of polarization states, are used as the information carriers to avoid the reference frame alignment, the decoy-state is adopted to overcome the security loophole caused by the weak coherent pulse source, and the high efficient OAM-sorter is adopted as the measurement tool for Charlie to obtain the output OAM state. Here, Charlie may be an untrusted third party. The results show that the authorized users, Alice and Bob, could distill a secret key with Charlie’s successful measurements, and the key generation performance is slightly better than that of the polarization-based MDI-QKD protocol in the two-dimensional OAM cases. Simultaneously, Alice and Bob can reduce the number of flipping the bits in the secure key distillation. It is indicated that a higher key generation rate performance could be obtained by a high dimensional OAM-MDI-QKD protocol because of the unlimited degree of freedom on OAM states. Moreover, the results show that the key generation rate and the transmission distance will decrease as the growth of the strength of atmospheric turbulence (AT) and the link attenuation. In addition, the decoy states used in the proposed protocol can get a considerable good performance without the need for an ideal source. Project supported by the National Natural Science Foundation of China (Grant Nos. 61271238 and 61475075), the Specialized Research Fund for the Doctoral Program of Higher Education of China (Grant No. 20123223110003), the Natural Science Research Foundation for Universities of Jiangsu Province of China (Grant No. 11KJA510002), the Open Research Fund of Key Laboratory of Broadband Wireless Communication and Sensor Network Technology, Ministry of Education, China (Grant No. NYKL2015011), and the Innovation Program of Graduate Education of Jiangsu Province, China (Grant No. KYLX0810). Gong Long-Yan is partially supported by Qinglan Project of Jiangsu Province, China.

An Application of the Impact Evaluation Process for Designing a Performance Measurement and Evaluation Framework in K-12 Environments

ERIC Educational Resources Information Center

Guerra-Lopez, Ingrid; Toker, Sacip

2012-01-01

This article illustrates the application of the Impact Evaluation Process for the design of a performance measurement and evaluation framework for an urban high school. One of the key aims of this framework is to enhance decision-making by providing timely feedback about the effectiveness of various performance improvement interventions. The…

Flow Control and Measurement in Electric Propulsion Systems: Towards an AIAA Reference Standard

DTIC Science & Technology

2013-10-01

the spacecraft sensors, although some improvement can be made by averaging several measurements together. 3. Thermal Mass Gauging Thermal Mass...flow controllers (MFCs) to measure and control propellant into EP devices. To determine several key thruster performance parameters with a low level...the specified time interval may not be known. A first recourse is to perform several measurements and examine the linearity. In cases where the

Novel image compression-encryption hybrid algorithm based on key-controlled measurement matrix in compressive sensing

NASA Astrophysics Data System (ADS)

Zhou, Nanrun; Zhang, Aidi; Zheng, Fen; Gong, Lihua

2014-10-01

The existing ways to encrypt images based on compressive sensing usually treat the whole measurement matrix as the key, which renders the key too large to distribute and memorize or store. To solve this problem, a new image compression-encryption hybrid algorithm is proposed to realize compression and encryption simultaneously, where the key is easily distributed, stored or memorized. The input image is divided into 4 blocks to compress and encrypt, then the pixels of the two adjacent blocks are exchanged randomly by random matrices. The measurement matrices in compressive sensing are constructed by utilizing the circulant matrices and controlling the original row vectors of the circulant matrices with logistic map. And the random matrices used in random pixel exchanging are bound with the measurement matrices. Simulation results verify the effectiveness, security of the proposed algorithm and the acceptable compression performance.

Firm Fixed Price and Cost Plus Fixed Fee Construction Contracts in Iraq and Afghanistan

DTIC Science & Technology

2012-03-01

The second goal was to establish key performance indicators ( KPIs ) that could be used to measure project success. An extensive literature review of...projects are dependent on the outcome of several overarching critical success factors (CSFs) and also specific key performance indicators ( KPIs ). The...capability, participant teamwork, and environmental factors can be identified and accounted. KPIs are suggested to evaluate actual project

Performance analysis of Supply Chain Management with Supply Chain Operation reference model

NASA Astrophysics Data System (ADS)

Hasibuan, Abdurrozzaq; Arfah, Mahrani; Parinduri, Luthfi; Hernawati, Tri; Suliawati; Harahap, Bonar; Rahmah Sibuea, Siti; Krianto Sulaiman, Oris; purwadi, Adi

2018-04-01

This research was conducted at PT. Shamrock Manufacturing Corpora, the company is required to think creatively to implement competition strategy by producing goods/services that are more qualified, cheaper. Therefore, it is necessary to measure the performance of Supply Chain Management in order to improve the competitiveness. Therefore, the company is required to optimize its production output to meet the export quality standard. This research begins with the creation of initial dimensions based on Supply Chain Management process, ie Plan, Source, Make, Delivery, and Return with hierarchy based on Supply Chain Reference Operation that is Reliability, Responsiveness, Agility, Cost, and Asset. Key Performance Indicator identification becomes a benchmark in performance measurement whereas Snorm De Boer normalization serves to equalize Key Performance Indicator value. Analiytical Hierarchy Process is done to assist in determining priority criteria. Measurement of Supply Chain Management performance at PT. Shamrock Manufacturing Corpora produces SC. Responsiveness (0.649) has higher weight (priority) than other alternatives. The result of performance analysis using Supply Chain Reference Operation model of Supply Chain Management performance at PT. Shamrock Manufacturing Corpora looks good because its monitoring system between 50-100 is good.

Can You Show You Are a Good Lecturer?

ERIC Educational Resources Information Center

Wood, Leigh N.; Harding, Ansie

2007-01-01

Measurement of the quality of teaching activities is becoming increasingly important since universities are rewarding performance in terms of promotion, awards and bonuses and research is no longer the only key performance indicator. Good teaching is not easy to identify and measure. This paper specifically deals with the issue of good teaching in…

Vision and academic performance of learning disabled children.

PubMed

Wharry, R E; Kirkpatrick, S W

1986-02-01

The purpose of this study was to assess difference in academic performance among myopic, hyperopic, and emmetropic children who were learning disabled. More specifically, myopic children were expected to perform better on mathematical and spatial tasks than would hyperopic ones and that hyperopic and emmetropic children would perform better on verbal measures than would myopic ones. For 439 learning disabled students visual anomalies were determined via a Generated Retinal Reflex Image Screening System. Test data were obtained from school files. Partial support for the hypothesis was obtained. Myopic learning disabled children outperformed hyperopic and emmetropic children on the Key Math test. Myopic children scored better than hyperopic children on the WRAT Reading subtest and on the Durrell Analysis of Reading Difficulty Oral Reading Comprehension, Oral Rate, Flashword, and Spelling subtests, and on the Key Math Measurement and Total Scores. Severity of refractive error significantly affected the Wechsler Intelligence Scale for Children--Revised Full Scale, Performance Scale, Verbal Scale, and Digit Span scores but did not affect any academic test scores. Several other findings were also reported. Those with nonametropic problems scored higher than those without problems on the Key Math Time subtest. Implications supportive of the theories of Benbow and Benbow and Geschwind and Behan were stated.

Evaluation of the durability of 3D printed keys produced by computational processing of image data

NASA Astrophysics Data System (ADS)

Straub, Jeremy; Kerlin, Scott

2016-05-01

Possession of a working 3D printed key can, for most practical purposes, convince observers that an illicit attempt to gain premises access is authorized. This paper seeks to assess three things. First, work has been performed to determine how easily the data for making models of keys can be obtained through manual measurement. It then presents work done to create a model of the key and determine how easy key modeling could be (particularly after a first key of a given key `blank' has been made). Finally, it seeks to assess the durability of the keys produced using 3D printing.

Simulating of the measurement-device independent quantum key distribution with phase randomized general sources

PubMed Central

Wang, Qin; Wang, Xiang-Bin

2014-01-01

We present a model on the simulation of the measurement-device independent quantum key distribution (MDI-QKD) with phase randomized general sources. It can be used to predict experimental observations of a MDI-QKD with linear channel loss, simulating corresponding values for the gains, the error rates in different basis, and also the final key rates. Our model can be applicable to the MDI-QKDs with arbitrary probabilistic mixture of different photon states or using any coding schemes. Therefore, it is useful in characterizing and evaluating the performance of the MDI-QKD protocol, making it a valuable tool in studying the quantum key distributions. PMID:24728000

A cost-effective measurement-device-independent quantum key distribution system for quantum networks

NASA Astrophysics Data System (ADS)

Valivarthi, Raju; Zhou, Qiang; John, Caleb; Marsili, Francesco; Verma, Varun B.; Shaw, Matthew D.; Nam, Sae Woo; Oblak, Daniel; Tittel, Wolfgang

2017-12-01

We experimentally realize a measurement-device-independent quantum key distribution (MDI-QKD) system. It is based on cost-effective and commercially available hardware such as distributed feedback lasers and field-programmable gate arrays that enable time-bin qubit preparation and time-tagging, and active feedback systems that allow for compensation of time-varying properties of photons after transmission through deployed fiber. We examine the performance of our system, and conclude that its design does not compromise performance. Our demonstration paves the way for MDI-QKD-based quantum networks in star-type topology that extend over more than 100 km distance.

Measuring collections effort improves cash performance.

PubMed

Shutts, Joe

2009-09-01

Having a satisfied work force can lead to an improved collections effort. Hiring the right people and training them ensures employee engagement. Measuring collections effort and offering incentives is key to revenue cycle success.

Satellite-to-Ground Entanglement-Based Quantum Key Distribution.

PubMed

Yin, Juan; Cao, Yuan; Li, Yu-Huai; Ren, Ji-Gang; Liao, Sheng-Kai; Zhang, Liang; Cai, Wen-Qi; Liu, Wei-Yue; Li, Bo; Dai, Hui; Li, Ming; Huang, Yong-Mei; Deng, Lei; Li, Li; Zhang, Qiang; Liu, Nai-Le; Chen, Yu-Ao; Lu, Chao-Yang; Shu, Rong; Peng, Cheng-Zhi; Wang, Jian-Yu; Pan, Jian-Wei

2017-11-17

We report on entanglement-based quantum key distribution between a low-Earth-orbit satellite equipped with a space borne entangled-photon source and a ground observatory. One of the entangled photons is measured locally at the satellite, and the other one is sent via a down link to the receiver in the Delingha ground station. The link attenuation is measured to vary from 29 dB at 530 km to 36 dB at 1000 km. We observe that the two-photon entanglement survives after being distributed between the satellite and the ground, with a measured state fidelity of ≥0.86. We then perform the entanglement-based quantum key distribution protocol and obtain an average final key rate of 3.5  bits/s at the distance range of 530-1000 km.

Post-processing techniques to enhance reliability of assignment algorithm based performance measures : [technical summary].

DOT National Transportation Integrated Search

2011-01-01

Travel demand modeling plays a key role in the transportation system planning and evaluation process. The four-step sequential travel demand model is the most widely used technique in practice. Traffic assignment is the key step in the conventional f...

NPS National Transit Inventory and Performance Report, 2014

DOT National Transportation Integrated Search

2015-09-09

This document summarizes key highlights and performance measures from the National Park Service (NPS) 2014 National Transit Inventory, and presents data for NPS transit systems system-wide. The document discusses statistics related to ridership, busi...

Mobility and reliability performance measurement.

DOT National Transportation Integrated Search

2013-06-01

This project grew out of the fact that mobility was identified early on as one of the key performance focus areas of NCDOTs : strategic transformation effort. The Transformation Management Team (TMT) established a TMT Mobility Workstream Team : in...

Setting Foundations for Developing Disaster Response Metrics.

PubMed

Abir, Mahshid; Bell, Sue Anne; Puppala, Neha; Awad, Osama; Moore, Melinda

2017-08-01

There are few reported efforts to define universal disaster response performance measures. Careful examination of responses to past disasters can inform the development of such measures. As a first step toward this goal, we conducted a literature review to identify key factors in responses to 3 recent events with significant loss of human life and economic impact: the 2003 Bam, Iran, earthquake; the 2004 Indian Ocean tsunami; and the 2010 Haiti earthquake. Using the PubMed (National Library of Medicine, Bethesda, MD) database, we identified 710 articles and retained 124 after applying inclusion and exclusion criteria. Seventy-two articles pertained to the Haiti earthquake, 38 to the Indian Ocean tsunami, and 14 to the Bam earthquake. On the basis of this review, we developed an organizational framework for disaster response performance measurement with 5 key disaster response categories: (1) personnel, (2) supplies and equipment, (3) transportation, (4) timeliness and efficiency, and (5) interagency cooperation. Under each of these, and again informed by the literature, we identified subcategories and specific items that could be developed into standardized performance measures. The validity and comprehensiveness of these measures can be tested by applying them to other recent and future disaster responses, after which standardized performance measures can be developed through a consensus process. (Disaster Med Public Health Preparedness. 2017;11:505-509).

Warning Lights: New Dashboard Reports Help Institutions Gauge Their Performance

ERIC Educational Resources Information Center

Butler, Lawrence M.

2007-01-01

Dashboard reports--like an automobile's instrument panel--present quick, comprehensible overviews of the institution's status and direction. Instead of speed, RPM and engine temperature, dashboard reports display comparable measures of organizational performance and mission effectiveness. These key performance indicators (KPIs) are presented in…

Quantum key distribution using basis encoding of Gaussian-modulated coherent states

NASA Astrophysics Data System (ADS)

Huang, Peng; Huang, Jingzheng; Zhang, Zheshen; Zeng, Guihua

2018-04-01

The continuous-variable quantum key distribution (CVQKD) has been demonstrated to be available in practical secure quantum cryptography. However, its performance is restricted strongly by the channel excess noise and the reconciliation efficiency. In this paper, we present a quantum key distribution (QKD) protocol by encoding the secret keys on the random choices of two measurement bases: the conjugate quadratures X and P . The employed encoding method can dramatically weaken the effects of channel excess noise and reconciliation efficiency on the performance of the QKD protocol. Subsequently, the proposed scheme exhibits the capability to tolerate much higher excess noise and enables us to reach a much longer secure transmission distance even at lower reconciliation efficiency. The proposal can work alternatively to strengthen significantly the performance of the known Gaussian-modulated CVQKD protocol and serve as a multiplier for practical secure quantum cryptography with continuous variables.

W-state Analyzer and Multi-party Measurement-device-independent Quantum Key Distribution

PubMed Central

Zhu, Changhua; Xu, Feihu; Pei, Changxing

2015-01-01

W-state is an important resource for many quantum information processing tasks. In this paper, we for the first time propose a multi-party measurement-device-independent quantum key distribution (MDI-QKD) protocol based on W-state. With linear optics, we design a W-state analyzer in order to distinguish the four-qubit W-state. This analyzer constructs the measurement device for four-party MDI-QKD. Moreover, we derived a complete security proof of the four-party MDI-QKD, and performed a numerical simulation to study its performance. The results show that four-party MDI-QKD is feasible over 150 km standard telecom fiber with off-the-shelf single photon detectors. This work takes an important step towards multi-party quantum communication and a quantum network. PMID:26644289

Simultaneous wavelength conversion of ASK and DPSK signals based on four-wave-mixing in dispersion engineered silicon waveguides.

PubMed

Xu, Lin; Ophir, Noam; Menard, Michael; Lau, Ryan Kin Wah; Turner-Foster, Amy C; Foster, Mark A; Lipson, Michal; Gaeta, Alexander L; Bergman, Keren

2011-06-20

We experimentally demonstrate four-wave-mixing (FWM)-based continuous wavelength conversion of optical differential-phase-shift-keyed (DPSK) signals with large wavelength conversion ranges as well as simultaneous wavelength conversion of dual-wavelength channels with mixed modulation formats in 1.1-cm-long dispersion-engineered silicon waveguides. We first validate up to 100-nm wavelength conversion range for 10-Gb/s DPSK signals, showcasing the capability to perform phase-preserving operations at high bit rates in chip-scale devices over wide conversion ranges. We further validate the wavelength conversion of dual-wavelength channels modulated with 10-Gb/s packetized phase-shift-keyed (PSK) and amplitude-shift-keyed (ASK) signals; demonstrate simultaneous operation on multiple channels with mixed formats in chip-scale devices. For both configurations, we measure the spectral and temporal responses and evaluate the performances using bit-error-rate (BER) measurements.

Development of Performance Dashboards in Healthcare Sector: Key Practical Issues

PubMed Central

Ghazisaeidi, Marjan; Safdari, Reza; Torabi, Mashallah; Mirzaee, Mahboobeh; Farzi, Jebraeil; Goodini, Azadeh

2015-01-01

Background: Static nature of performance reporting systems in health care sector has resulted in inconsistent, incomparable, time consuming, and static performance reports that are not able to transparently reflect a round picture of performance and effectively support healthcare managers’ decision makings. So, the healthcare sector needs interactive performance management tools such as performance dashboards to measure, monitor, and manage performance more effectively. The aim of this article was to identify key issues that need to be addressed for developing high-quality performance dashboards in healthcare sector. Methods: A literature review was established to search electronic research databases, e-journals collections, and printed journals, books, dissertations, and theses for relevant articles. The search strategy interchangeably used the terms of “dashboard”, “performance measurement system”, and “executive information system” with the term of “design” combined with operator “AND”. Search results (n=250) were adjusted for duplications, screened based on their abstract relevancy and full-text availability (n=147) and then assessed for eligibility (n=40). Eligible articles were included if they had explicitly focused on dashboards, performance measurement systems or executive information systems design. Finally, 28 relevant articles included in the study. Results: Creating high-quality performance dashboards requires addressing both performance measurement and executive information systems design issues. Covering these two fields, identified contents were categorized to four main domains: KPIs development, Data Sources and data generation, Integration of dashboards to source systems, and Information presentation issues. Conclusion: This study implies the main steps to develop dashboards for the purpose of performance management. Performance dashboards developed on performance measurement and executive information systems principles and supported by proper back-end infrastructure will result in creation of dynamic reports that help healthcare managers to consistently measure the performance, continuously detect outliers, deeply analyze causes of poor performance, and effectively plan for the future. PMID:26635442

Quantum key distribution with an entangled light emitting diode

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dzurnak, B.; Stevenson, R. M.; Nilsson, J.

Measurements performed on entangled photon pairs shared between two parties can allow unique quantum cryptographic keys to be formed, creating secure links between users. An advantage of using such entangled photon links is that they can be adapted to propagate entanglement to end users of quantum networks with only untrusted nodes. However, demonstrations of quantum key distribution with entangled photons have so far relied on sources optically excited with lasers. Here, we realize a quantum cryptography system based on an electrically driven entangled-light-emitting diode. Measurement bases are passively chosen and we show formation of an error-free quantum key. Our measurementsmore » also simultaneously reveal Bell's parameter for the detected light, which exceeds the threshold for quantum entanglement.« less

Measuring competition in health care markets.

PubMed Central

Baker, L C

2001-01-01

OBJECTIVE: Measuring competition is increasingly important for analysis of health care markets and policies. Measurement of competition in health care is made complex by the breadth of potential issues under study, by the lack of necessary data, and by rapid changes in health care financing and delivery. This study reviews key issues in the measurement of competition and is designed to familiarize researchers and policymakers interested in competition measurement, but not steeped in its practice, with key concepts, data sources, and ways of adapting measures to fit ongoing changes in health care markets. PRINCIPAL FINDINGS: Attention to several key issues will strengthen measurement. Important components of successful measurement are: careful identification of the products and market areas for study; selection of Herfindahl-Hirschman or other indices to fit the issues being considered; consideration of econometric problems, like endogeneity, with common measures; and attention to the ways that current marketplace changes, like growth in managed care, affect the performance of classic measures. Data needed for constructing measures are also frequently scarce, insufficient, or both. Measurement could be improved with access to better data. PMID:11327175

Transforming Oncology Care: Developing a Strategy and Measuring Success.

PubMed

Reid Ponte, Patricia; Berry, Donna; Buswell, Lori; Gross, Anne; Hayes, Carolyn; Kostka, Judy; Poyner-Reed, Mary; West, Colleen

2016-05-01

To examine accountability and performance measurement in health care and present a case study that illustrates the link between goal setting and measurement and how a strategic plan can provide a framework for metric selection. National reports, literature review and institutional experience. Nurse leaders and clinicians in oncology settings are challenged to anticipate future trends in oncology care and create a culture, infrastructure, and practice environment that supports innovation, advancement of oncology nursing practice and excellence in patient- and family-centered care. Performance metrics assessing key processes and outcomes of care are essential to meet this challenge. With an increasing number of national organizations offering their version of key quality standards and metrics, it is critical for nurses to have a formal process in place to determine and implement the measures most useful in guiding change for a particular clinical setting. Copyright © 2016 Elsevier Inc. All rights reserved.

The Social Mobility Index: Further Information

ERIC Educational Resources Information Center

Sutton Trust, 2015

2015-01-01

The "Social Mobility Index" ranks all 533 parliamentary constituencies in England according to five measures of social mobility through education: (1) Performance of disadvantaged pupils in early years test; (2) Performance of disadvantaged pupils in Key Stage 2 tests; (3) Performance of disadvantaged pupils at GCSE; (4) Progress of…

Understanding key performance indicators for breast support: An analysis of breast support effects on biomechanical, physiological and subjective measures during running.

PubMed

Risius, Debbie; Milligan, Alexandra; Berns, Jason; Brown, Nicola; Scurr, Joanna

2017-05-01

To assess the effectiveness of breast support previous studies monitored breast kinematics and kinetics, subjective feedback, muscle activity (EMG), ground reaction forces (GRFs) and physiological measures in isolation. Comparing these variables within one study will establish the key performance variables that distinguish between breast supports during activities such as running. This study investigates the effects of changes in breast support on biomechanical, physiological and subjective measures during running. Ten females (34D) ran for 10 min in high and low breast supports, and for 2 min bare breasted (2.8 m·s -1 ). Breast and body kinematics, EMG, expired air and heart rate were recorded. GRFs were recorded during 10 m overground runs (2.8 m·s -1 ) and subjective feedback obtained after each condition. Of the 62 variables measured, 22 kinematic and subjective variables were influenced by changes in breast support. Willingness to exercise, time lag and superio-inferior breast velocity were most affected. GRFs, EMG and physiological variables were unaffected by breast support changes during running. Breast displacement reduction, although previously advocated, was not the most sensitive variable to breast support changes during running. Instead breast support products should be assessed using a battery of performance indicators, including the key kinematic and subjective variables identified here.

Mapping photopolarimeter spectrometer instrument feasibility study for future planetary flight missions

NASA Technical Reports Server (NTRS)

1990-01-01

Evaluations are summarized directed towards defining optimal instrumentation for performing planetary polarization measurements from a spacecraft platform. An overview of the science rationale for polarimetric measurements is given to point out the importance of such measurements for future studies and exploration of the outer planets. The key instrument features required to perform the needed measurements are discussed and applied to the requirements for the Cassini mission to Saturn. The resultant conceptual design of a spectro-polarimeter photometer for Cassini is described in detail.

EPA Monthly Key Performance Indicator Dashboards 2018

EPA Pesticide Factsheets

2018 reports are added each month, which measure how well EPA web content is meeting three performance goals: increases in how much users consume content, are able to find or discover what they need, and their level of engagement.

Performance Indicators in Math: Implications for Brief Experimental Analysis of Academic Performance

ERIC Educational Resources Information Center

VanDerheyden, Amanda M.; Burns, Matthew K.

2009-01-01

Brief experimental analysis (BEA) can be used to specify intervention characteristics that produce positive learning gains for individual students. A key challenge to the use of BEA for intervention planning is the identification of performance indicators (including topography of the skill, measurement characteristics, and decision criteria) that…

Analytical simulation of SPS system performance, volume 3, phase 3

NASA Technical Reports Server (NTRS)

Kantak, A. V.; Lindsey, W. C.

1980-01-01

The simulation model for the Solar Power Satellite spaceantenna and the associated system imperfections are described. Overall power transfer efficiency, the key performance issue, is discussed as a function of the system imperfections. Other system performance measures discussed include average power pattern, mean beam gain reduction, and pointing error.

Analysis of travel time reliability on Indiana interstates.

DOT National Transportation Integrated Search

2009-09-15

Travel-time reliability is a key performance measure in any transportation system. It is a : measure of quality of travel time experienced by transportation system users and reflects the efficiency : of the transportation system to serve citizens, bu...

Comparison of Aerosol Optical Depth from Four Solar Radiometers During the Fall 1997 ARM Intensive Observation Period

NASA Technical Reports Server (NTRS)

Schmid, B.; Michalsky, J.; Halthore, R.; Beauharnois, M.; Harrison, L.; Livingston, J.; Russell, P.; Holben, B.; Eck, T.; Smirnov, A.

2000-01-01

In the Fall of 1997 the Atmospheric Radiation Measurement (ARM) program conducted an Intensive Observation Period (IOP) to study aerosols. Five sun-tracking radiometers were present to measure the total column aerosol optical depth. This comparison performed on the Southern Great Plains (SGP) demonstrates the capabilities and limitations of modern tracking sunphotometers at a location typical of where aerosol measurements are required. The key result was agreement in aerosol optical depth measured by 4 of the 5 instruments within 0.015 (rms). The key to this level of agreement was meticulous care in the calibrations of the instruments.

National Unmanned Aerial System Standardized Performance Testing and Rating (NUSTAR)

NASA Technical Reports Server (NTRS)

Kopardekar, Parimal

2016-01-01

The overall objective of the NUSTAR Capability is to offer standardized tests and scenario conditions to assess performance of the UAS. The following are goals of the NU-STAR: 1. Create a prototype standardized tests and scenarios that vehicles can be tested against. 2. Identify key performance parameters of all UAS and their standardized measurement strategy. 3. Develop standardized performance reporting method (e.g., consumer report style) to assist prospective buyers. 4. Identify key performance metrics that could be used by judged towards overall safety of the UAS and operations. 5. If vehicle certification standard is made by a regulatory agency, the performance of individual UAS could be compared against the minimum requirement (e.g., sense and avoid detection time, stopping distance, kinetic energy, etc.).

UK key performance indicators and quality assurance standards for colonoscopy.

PubMed

Rees, Colin J; Thomas Gibson, Siwan; Rutter, Matt D; Baragwanath, Phil; Pullan, Rupert; Feeney, Mark; Haslam, Neil

2016-12-01

Colonoscopy should be delivered by endoscopists performing high quality procedures. The British Society of Gastroenterology, the UK Joint Advisory Group on GI Endoscopy, and the Association of Coloproctology of Great Britain and Ireland have developed quality assurance measures and key performance indicators for the delivery of colonoscopy within the UK. This document sets minimal standards for delivery of procedures along with aspirational targets that all endoscopists should aim for. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/.

Measuring Integration of Cancer Services to Support Performance Improvement: The CSI Survey

PubMed Central

Dobrow, Mark J.; Paszat, Lawrence; Golden, Brian; Brown, Adalsteinn D.; Holowaty, Eric; Orchard, Margo C.; Monga, Neerav; Sullivan, Terrence

2009-01-01

Objective: To develop a measure of cancer services integration (CSI) that can inform clinical and administrative decision-makers in their efforts to monitor and improve cancer system performance. Methods: We employed a systematic approach to measurement development, including review of existing cancer/health services integration measures, key-informant interviews and focus groups with cancer system leaders. The research team constructed a Web-based survey that was field- and pilot-tested, refined and then formally conducted on a sample of cancer care providers and administrators in Ontario, Canada. We then conducted exploratory factor analysis to identify key dimensions of CSI. Results: A total of 1,769 physicians, other clinicians and administrators participated in the survey, responding to a 67-item questionnaire. The exploratory factor analysis identified 12 factors that were linked to three broader dimensions: clinical, functional and vertical system integration. Conclusions: The CSI Survey provides important insights on a range of typically unmeasured aspects of the coordination and integration of cancer services, representing a new tool to inform performance improvement efforts. PMID:20676250

Satellite-instrument system engineering best practices and lessons

NASA Astrophysics Data System (ADS)

Schueler, Carl F.

2009-08-01

This paper focuses on system engineering development issues driving satellite remote sensing instrumentation cost and schedule. A key best practice is early assessment of mission and instrumentation requirements priorities driving performance trades among major instrumentation measurements: Radiometry, spatial field of view and image quality, and spectral performance. Key lessons include attention to technology availability and applicability to prioritized requirements, care in applying heritage, approaching fixed-price and cost-plus contracts with appropriate attention to risk, and assessing design options with attention to customer preference as well as design performance, and development cost and schedule. A key element of success either in contract competition or execution is team experience. Perhaps the most crucial aspect of success, however, is thorough requirements analysis and flowdown to specifications driving design performance with sufficient parameter margin to allow for mistakes or oversights - the province of system engineering from design inception to development, test and delivery.

CONTINUOUS PERFORMANCE MONITORING TECHNIQUES FOR HAZARDOUS WASTE INCINERATORS

EPA Science Inventory

The report describes a study to determine the feasibility of utilizing realtime continuous exhaust measurements of combustion intermediates as a way to monitor incinerator performance. The key issue was to determine if a direct correlation exists between destruction efficiency (D...

The Compass Rose Effectiveness Model

ERIC Educational Resources Information Center

Spiers, Cynthia E.; Kiel, Dorothy; Hohenrink, Brad

2008-01-01

The effectiveness model focuses the institution on mission achievement through assessment and improvement planning. Eleven mission criteria, measured by key performance indicators, are aligned with the accountability interest of internal and external stakeholders. A Web-based performance assessment application supports the model, documenting the…

Diagnostic colonoscopy: performance measurement study.

PubMed

Kuznets, Naomi

2002-07-01

This is the fifth of a series of best practices studies undertaken by the Performance Measurement Initiative (PMI), the centerpiece of the Institute for Quality Improvement (IQI), a not-for-profit quality improvement subsidiary of the Accreditation Association for Ambulatory Health Care (AAAHC) (Performance Measurement Initiative, 1999a, 1999b, 2000a, 2000b). The IQI was created to offer clinical performance measurement and improvement opportunities to ambulatory health care organizations and others interested in quality patient care. The purpose of the study was to provide opportunities to initiate clinical performance measurement on key processes and outcomes for this procedure and use this information for clinical quality improvement. This article provides performance measurement information on how organizations that have demonstrated and validated differences in clinical practice can have similar outcomes, but at a dramatically lower cost. The intent of the article is to provide organizations with alternatives in practice to provide a better value to their patients.

Quantum-noise randomized data encryption for wavelength-division-multiplexed fiber-optic networks

DOE Office of Scientific and Technical Information (OSTI.GOV)

Corndorf, Eric; Liang Chuang; Kanter, Gregory S.

2005-06-15

We demonstrate high-rate randomized data-encryption through optical fibers using the inherent quantum-measurement noise of coherent states of light. Specifically, we demonstrate 650 Mbit/s data encryption through a 10 Gbit/s data-bearing, in-line amplified 200-km-long line. In our protocol, legitimate users (who share a short secret key) communicate using an M-ry signal set while an attacker (who does not share the secret key) is forced to contend with the fundamental and irreducible quantum-measurement noise of coherent states. Implementations of our protocol using both polarization-encoded signal sets as well as polarization-insensitive phase-keyed signal sets are experimentally and theoretically evaluated. Different from the performancemore » criteria for the cryptographic objective of key generation (quantum key-generation), one possible set of performance criteria for the cryptographic objective of data encryption is established and carefully considered.« less

A balanced perspective: using nonfinancial measures to assess financial performance.

PubMed

Watkins, Ann L

2003-11-01

Assessments of hospitals' financial performance have traditionally been based exclusively on analysis of a concise set of key financial ratios. One study, however, demonstrates that analysis of a hospital's financial condition can be significantly enhanced with the addition of several nonfinancial measures, including case-mix adjusted admissions, case-mix adjusted admissions per full-time equivalent, and case-mix adjusted admissions per beds in service.

Recent advances in ultrafast-laser-based spectroscopy and imaging for reacting plasmas and flames

NASA Astrophysics Data System (ADS)

Patnaik, Anil K.; Adamovich, Igor; Gord, James R.; Roy, Sukesh

2017-10-01

Reacting flows and plasmas are prevalent in a wide array of systems involving defense, commercial, space, energy, medical, and consumer products. Understanding the complex physical and chemical processes involving reacting flows and plasmas requires measurements of key parameters, such as temperature, pressure, electric field, velocity, and number densities of chemical species. Time-resolved measurements of key chemical species and temperature are required to determine kinetics related to the chemical reactions and transient phenomena. Laser-based, noninvasive linear and nonlinear spectroscopic approaches have proved to be very valuable in providing key insights into the physico-chemical processes governing reacting flows and plasmas as well as validating numerical models. The advent of kilohertz rate amplified femtosecond lasers has expanded the multidimensional imaging of key atomic species such as H, O, and N in a significant way, providing unprecedented insight into preferential diffusion and production of these species under chemical reactions or electric-field driven processes. These lasers not only provide 2D imaging of chemical species but have the ability to perform measurements free of various interferences. Moreover, these lasers allow 1D and 2D temperature-field measurements, which were quite unimaginable only a few years ago. The rapid growth of the ultrafast-laser-based spectroscopic measurements has been fueled by the need to achieve the following when measurements are performed in reacting flows and plasmas. They are: (1) interference-free measurements (collision broadening, photolytic dissociation, Stark broadening, etc), (2) time-resolved single-shot measurements at a rate of 1-10 kHz, (3) spatially-resolved measurements, (4) higher dimensionality (line, planar, or volumetric), and (5) simultaneous detection of multiple species. The overarching goal of this article is to review the current state-of-the-art ultrafast-laser-based spectroscopic techniques and their remarkable development in the past two decades in meeting one or all of the above five goals for the spectroscopic measurement of temperature, number density of the atomic and molecular species, and electric field.

Impact of Intended and Unintended Outcomes of Performance-Based Funding on Community Colleges

ERIC Educational Resources Information Center

Smith, Charanne P.

2015-01-01

Nationally, state and federal legislative bodies are increasingly requiring higher education institutions to demonstrate a solid return on investment. One of the key ways to do this is through performance based funding which links funding received to specific institutional performance measures and outcomes including graduation, and/or completion…

Instrumentation for measuring and recording streamflow data at river-control structures

USGS Publications Warehouse

,

1983-01-01

Instrumentation was developed in the mid to late 60 's to resolve the dilemma of intolerably high percentages of missing streamflow records on certain large and highly controlled streams in industrialized parts of the United States. Analysis of the field situation at specific problem sites quickly suggested that conventional stream gaging techniques should be supplanted by new instruments, designed to measure key hydraulic data at the nearest stream control structures. The key data were found universally to include some combination of a length measurement to specify the vertical height of a gate opening in a dam; measurement of pressure head differential in a turbine; a count of lockages; and precise measurement of time, to give one master reference scale to which all measurements could be keyed. The instruments designed to collect such key data are the shaft position digitizer, the shaft output follower, the STACOM manometer, the lock pressure switch, and the digital data collection console. Although their design was prompted by the need to collect data at river control structures their potential for field use is not that restrictive. Several of these instruments have already found widespread use in the hydrologic data collection program at large. In the 12-1/2 yr period from June 1968 to December 1980 nineteen different river control structures were instrumented. The general experience to date has been a marked improvement in completeness of record, with the average performance somewhere in the 80 percentile range. Performance percentiles at individual sites have ranged from the mid 90 's to about 70. Maintenance records show the instruments to be virtually trouble free, except for the unpredictable acts of nature and man. (Author 's abstract)

Measuring Patients' Experience of Rehabilitation Services Across the Care Continuum. Part II: Key Dimensions.

PubMed

McMurray, Josephine; McNeil, Heather; Lafortune, Claire; Black, Samantha; Prorok, Jeanette; Stolee, Paul

2016-01-01

To identify key dimensions of patients' experience across the rehabilitative care system and to recommend a framework to develop survey items that measure the rehabilitative care experience. Data were sourced from a literature review that searched MEDLINE (PubMed), CINAHL (Ebsco), and PsycINFO (APA PsycNET) databases from 2004 to 2014, the reference lists of the final accepted articles, and hand searches of relevant journals. Four reviewers performed the screening process on 2472 articles; 33 were included for analysis. Interrater reliability was confirmed through 2 rounds of title review and 1 round of abstract review, with an average κ score of .69. The final sample of 33 accepted articles was imported into a qualitative data analysis software application. Multiple levels of coding and a constant comparative methodology generated 6 themes. There were 502 discreet survey questions measuring patient experience that were categorized using the following dimensions: rehabilitative care ecosystem, client and informal caregiver engagement, patient and health care provider relation, pain and functional status, group and individual identity, and open ended. The most common survey questions examine the care delivery ecosystem (37%), the engagement of clients and their informal caregivers (24.9%), and the quality of relations between providers and patients (21.7%). Examination of patient's functional status and management of pain yielded (15.3%) of the instruments' questions. Currently available instruments and questions that measure patients' experience in rehabilitative care are unable to assess the performance of rehabilitative delivery systems that aspire to integrate care across the continuum. However, question panels derived from our 6 key themes may measure the key concepts that define rehabilitative care and facilitate measurement of patient experience at the system level. Copyright © 2016 American Congress of Rehabilitation Medicine. Published by Elsevier Inc. All rights reserved.

Key on demand (KoD) for software-defined optical networks secured by quantum key distribution (QKD).

PubMed

Cao, Yuan; Zhao, Yongli; Colman-Meixner, Carlos; Yu, Xiaosong; Zhang, Jie

2017-10-30

Software-defined optical networking (SDON) will become the next generation optical network architecture. However, the optical layer and control layer of SDON are vulnerable to cyberattacks. While, data encryption is an effective method to minimize the negative effects of cyberattacks, secure key interchange is its major challenge which can be addressed by the quantum key distribution (QKD) technique. Hence, in this paper we discuss the integration of QKD with WDM optical networks to secure the SDON architecture by introducing a novel key on demand (KoD) scheme which is enabled by a novel routing, wavelength and key assignment (RWKA) algorithm. The QKD over SDON with KoD model follows two steps to provide security: i) quantum key pools (QKPs) construction for securing the control channels (CChs) and data channels (DChs); ii) the KoD scheme uses RWKA algorithm to allocate and update secret keys for different security requirements. To test our model, we define a security probability index which measures the security gain in CChs and DChs. Simulation results indicate that the security performance of CChs and DChs can be enhanced by provisioning sufficient secret keys in QKPs and performing key-updating considering potential cyberattacks. Also, KoD is beneficial to achieve a positive balance between security requirements and key resource usage.

Using a nursing balanced scorecard approach to measure and optimize nursing performance.

PubMed

Jeffs, Lianne; Merkley, Jane; Richardson, Sandy; Eli, Jackie; McAllister, Mary

2011-04-01

The authors give an overview of one healthcare organization's experience in developing a nursing strategic plan and nursing balanced scorecard (NBS) using a focused planning process involving strategy mapping. The NBS is being used at this organization to manage the nursing strategic plan by leveraging and improving nursing processes and organizational capabilities as required, based on data and transparent communication of performance results to key stakeholders. Key strategies and insights may help other nurse leaders in developing or refining strategic approaches to measuring nursing performance. Vital to the success of an organization's strategic plan are ongoing endorsement, engagement and visibility of senior leaders. Quality of decisions made depends on the organization's ability to collect data from multiple sources using standardized definitions, mine data and extract them for statistical analysis and effectively present them in a compelling and understandable way to users and decision-makers.

Data warehouse model for monitoring key performance indicators (KPIs) using goal oriented approach

NASA Astrophysics Data System (ADS)

Abdullah, Mohammed Thajeel; Ta'a, Azman; Bakar, Muhamad Shahbani Abu

2016-08-01

The growth and development of universities, just as other organizations, depend on their abilities to strategically plan and implement development blueprints which are in line with their vision and mission statements. The actualizations of these statements, which are often designed into goals and sub-goals and linked to their respective actors are better measured by defining key performance indicators (KPIs) of the university. The proposes ReGADaK, which is an extended the GRAnD approach highlights the facts, dimensions, attributes, measures and KPIs of the organization. The measures from the goal analysis of this unit serve as the basis of developing the related university's KPIs. The proposed data warehouse schema is evaluated through expert review, prototyping and usability evaluation. The findings from the evaluation processes suggest that the proposed data warehouse schema is suitable for monitoring the University's KPIs.

A Robust Strategy for Total Ionizing Dose Testing of Field Programmable Gate Arrays

NASA Technical Reports Server (NTRS)

Wilcox, Edward; Berg, Melanie; Friendlich, Mark; Lakeman, Joseph; KIm, Hak; Pellish, Jonathan; LaBel, Kenneth

2012-01-01

We present a novel method of FPGA TID testing that measures propagation delay between flip-flops operating at maximum speed. Measurement is performed on-chip at-speed and provides a key design metric when building system-critical synchronous designs.

Emergency department operations dictionary: results of the second performance measures and benchmarking summit.

PubMed

Welch, Shari J; Stone-Griffith, Suzanne; Asplin, Brent; Davidson, Steven J; Augustine, James; Schuur, Jeremiah D

2011-05-01

The public, payers, hospitals, and Centers for Medicare and Medicaid Services (CMS) are demanding that emergency departments (EDs) measure and improve performance, but this cannot be done unless we define the terms used in ED operations. On February 24, 2010, 32 stakeholders from 13 professional organizations met in Salt Lake City, Utah, to standardize ED operations metrics and definitions, which are presented in this consensus paper. Emergency medicine (EM) experts attending the Second Performance Measures and Benchmarking Summit reviewed, expanded, and updated key definitions for ED operations. Prior to the meeting, participants were provided with the definitions created at the first summit in 2006 and relevant documents from other organizations and asked to identify gaps and limitations in the original work. Those responses were used to devise a plan to revise and update the definitions. At the summit, attendees discussed and debated key terminology, and workgroups were created to draft a more comprehensive document. These results have been crafted into two reference documents, one for metrics and the operations dictionary presented here. The ED Operations Dictionary defines ED spaces, processes, patient populations, and new ED roles. Common definitions of key terms will improve the ability to compare ED operations research and practice and provide a common language for frontline practitioners, managers, and researchers. © 2011 by the Society for Academic Emergency Medicine.

Demonstration of differential phase-shift keying demodulation at 10 Gbit/s optimal fiber Bragg grating filters.

PubMed

Gatti, Davide; Galzerano, Gianluca; Laporta, Paolo; Longhi, Stefano; Janner, Davide; Guglierame, Andrea; Belmonte, Michele

2008-07-01

Optimal demodulation of differential phase-shift keying signals at 10 Gbit/s is experimentally demonstrated using a specially designed structured fiber Bragg grating composed by Fabry-Perot coupled cavities. Bit-error-rate measurements show that, as compared with a conventional Gaussian-shaped filter, our demodulator gives approximately 2.8 dB performance improvement.

Transforming revenue management.

PubMed

Silveria, Richard; Alliegro, Debra; Nudd, Steven

2008-11-01

Healthcare organizations that want to undertake a patient administrative/revenue management transformation should: Define the vision with underlying business objectives and key performance measures. Strategically partner with key vendors for business process development and technology design. Create a program organization and governance infrastructure. Develop a corporate design model that defines the standards for operationalizing the vision. Execute the vision through technology deployment and corporate design model implementation.

Genetics at school level: addressing the difficulties

NASA Astrophysics Data System (ADS)

Chu, Yu-Chien; Reid, Norman

2012-11-01

Background : A wide range of studies has offered suggestions why genetics is difficult and some of their key findings are summarised. Underpinning all of this is the way the brain works when handling information. The limitations of working memory capacity offer an interpretation of these difficulties Purpose : The aim is to confirm that working memory capacity (and the related concept of field dependency) controls performance in understanding genetics and whether it is possible to improve performance by changing the teaching approach to mininise overload. Programme description : The curriculum in Taiwan in genetics is outlined briefly. A wide range of measurements were made. Using a diagnostic test of understanding of underpinning ideas, the key areas of weakness were detected before the pupils started the course. Sample : Stage 1: 141 students in Taiwan, aged 13, boys and girls, drawn from a cross-section of Taiwanese pupils at this age, following their first course in genetics. Stage 2: 361 students, drawn from a cross-section of Taiwanese pupils at the same age, and divided into two groups (experimental-control) which both encompass the same ability range. Design and methods : Stage 1: test of pre-knowledge using structural communication grids, applied before the course commenced; working memory capacity using the figural intersection test; extent of field dependency using the group embedded figure test; understanding of genetics was measured at end of course; school test data collated. Stage 2: following a completely revised approach, performance in genetics was measured using traditional school tests and a word association test. Student perspectives were measured. Results : The test of pre-knowledge revealed key areas of difficulty. In addition, it was found that working memory capacity and extent of field dependency both correlated extremely highly with all measures of performance. Given that it has been established that working memory capacity controls performance, working memory demand explains why genetics is difficult. It was found that re-structuring the teaching approach to minimise mental overload brought about a very marked improvement in performance. Conclusions : The findings suggest that it is possible to reduce difficulties in understanding genetics by means of teaching re-design to minimise potential working memory overload, with concomitant improvements in learner confidence.

Performance measurement in healthcare: part II--state of the science findings by stage of the performance measurement process.

PubMed

Adair, Carol E; Simpson, Elizabeth; Casebeer, Ann L; Birdsell, Judith M; Hayden, Katharine A; Lewis, Steven

2006-07-01

This paper summarizes findings of a comprehensive, systematic review of the peer-reviewed and grey literature on performance measurement according to each stage of the performance measurement process--conceptualization, selection and development, data collection, and reporting and use. It also outlines implications for practice. Six hundred sixty-four articles about organizational performance measurement from the health and business literature were reviewed after systematic searches of the literature, multi-rater relevancy ratings, citation checks and expert author nominations. Key themes were extracted and summarized from the most highly rated papers for each performance measurement stage. Despite a virtually universal consensus on the potential benefits of performance measurement, little evidence currently exists to guide practice in healthcare. Issues in conceptualizing systems include strategic alignment and scope. There are debates on the criteria for selecting measures and on the types and quality of measures. Implementation of data collection and analysis systems is complex and costly, and challenges persist in reporting results, preventing unintended effects and putting findings for improvement into action. There is a need for further development and refinement of performance measures and measurement systems, with a particular focus on strategies to ensure that performance measurement leads to healthcare improvement.

International Space Station Major Constituent Analyzer On-Orbit Performance

NASA Technical Reports Server (NTRS)

Gardner, Ben D.; Erwin, Phillip M.; Thoresen, Souzan; Granahan, John; Matty, Chris

2012-01-01

The Major Constituent Analyzer is a mass spectrometer based system that measures the major atmospheric constituents on the International Space Station. A number of limited-life components require periodic changeout, including the ORU 02 analyzer and the ORU 08 Verification Gas Assembly. Over the past two years, two ORU 02 analyzer assemblies have operated nominally while two others have experienced premature on-orbit failures. These failures as well as nominal performances demonstrate that ORU 02 performance remains a key determinant of MCA performance and logistical support. It can be shown that monitoring several key parameters can maximize the capacity to monitor ORU health and properly anticipate end of life. Improvements to ion pump operation and ion source tuning are expected to improve lifetime performance of the current ORU 02 design.

Aerodynamic Performance of a Compact, High Work-Factor Centrifugal Compressor at the Stage and Subcomponent Level

NASA Technical Reports Server (NTRS)

Braunscheidel, Edward P.; Welch, Gerard E.; Skoch, Gary J.; Medic, Gorazd; Sharma, Om P.

2014-01-01

The measured aerodynamic performance of a compact, high work factor, single-stage centrifugal compressor, comprising an impeller, diffuser, 90-bend, and exit guide vane (EGV), is reported. Performance levels are based on steady-state total-pressure and total-temperature rake and angularity-probe data acquired at key machine rating planes during recent testing at NASA Glenn Research Center. Aerodynamic performance at the stage level are reported for operation between 70 to 105 of design corrected speed, with subcomponent (impeller, diffuser, and exitguide-vane) detailed flow field measurements presented and discussed at the 100 design-speed condition. Individual component losses from measurements are compared with pre-test predictions on a limited basis.

Data Collection Manual for Academic and Research Library Network Statistics and Performance Measures.

ERIC Educational Resources Information Center

Shim, Wonsik "Jeff"; McClure, Charles R.; Fraser, Bruce T.; Bertot, John Carlo

This manual provides a beginning approach for research libraries to better describe the use and users of their networked services. The manual also aims to increase the visibility and importance of developing such statistics and measures. Specific objectives are: to identify selected key statistics and measures that can describe use and users of…

Laser diode technology for coherent communications

NASA Technical Reports Server (NTRS)

Channin, D. J.; Palfrey, S. L.; Toda, M.

1989-01-01

The effect of diode laser characteristics on the overall performance capabilities of coherent communication systems is discussed. In particular, attention is given to optical performance issues for diode lasers in coherent systems, measurements of key performance parameters, and optical requirements for coherent single-channel and multichannel communication systems. The discussion also covers limitations imposed by diode laser optical performance on multichannel system capabilities and implications for future developments.

Integrating optical finger motion tracking with surface touch events.

PubMed

MacRitchie, Jennifer; McPherson, Andrew P

2015-01-01

This paper presents a method of integrating two contrasting sensor systems for studying human interaction with a mechanical system, using piano performance as the case study. Piano technique requires both precise small-scale motion of fingers on the key surfaces and planned large-scale movement of the hands and arms. Where studies of performance often focus on one of these scales in isolation, this paper investigates the relationship between them. Two sensor systems were installed on an acoustic grand piano: a monocular high-speed camera tracking the position of painted markers on the hands, and capacitive touch sensors attach to the key surfaces which measure the location of finger-key contacts. This paper highlights a method of fusing the data from these systems, including temporal and spatial alignment, segmentation into notes and automatic fingering annotation. Three case studies demonstrate the utility of the multi-sensor data: analysis of finger flexion or extension based on touch and camera marker location, timing analysis of finger-key contact preceding and following key presses, and characterization of individual finger movements in the transitions between successive key presses. Piano performance is the focus of this paper, but the sensor method could equally apply to other fine motor control scenarios, with applications to human-computer interaction.

Integrating optical finger motion tracking with surface touch events

PubMed Central

MacRitchie, Jennifer; McPherson, Andrew P.

2015-01-01

This paper presents a method of integrating two contrasting sensor systems for studying human interaction with a mechanical system, using piano performance as the case study. Piano technique requires both precise small-scale motion of fingers on the key surfaces and planned large-scale movement of the hands and arms. Where studies of performance often focus on one of these scales in isolation, this paper investigates the relationship between them. Two sensor systems were installed on an acoustic grand piano: a monocular high-speed camera tracking the position of painted markers on the hands, and capacitive touch sensors attach to the key surfaces which measure the location of finger-key contacts. This paper highlights a method of fusing the data from these systems, including temporal and spatial alignment, segmentation into notes and automatic fingering annotation. Three case studies demonstrate the utility of the multi-sensor data: analysis of finger flexion or extension based on touch and camera marker location, timing analysis of finger-key contact preceding and following key presses, and characterization of individual finger movements in the transitions between successive key presses. Piano performance is the focus of this paper, but the sensor method could equally apply to other fine motor control scenarios, with applications to human-computer interaction. PMID:26082732

Assessing the Analytical Performance of Systems for Self-Monitoring of Blood Glucose: Concepts of Performance Evaluation and Definition of Metrological Key Terms

PubMed Central

Schnell, Oliver; Hinzmann, Rolf; Kulzer, Bernd; Freckmann, Guido; Erbach, Michael; Lodwig, Volker; Heinemann, Lutz

2013-01-01

Reliability of blood glucose (BG) measurements is a prerequisite for successful diabetes management. Publications on the evaluation of self-monitored glucose values, however, are frequently characterized by a confusion in terminology. We provide an inventory of key terms such as accuracy, trueness, precision, traceability, calibration, and matrix effect to avoid future misunderstanding. Definitions are taken from the metrological literature and international norms and explained in a language intended for nonspecialists in metrology. The terms are presented in light of the need to apply generally accepted definitions. In addition, a description of requirements and components for a sound evaluation of BG measurement systems is presented. These factors will also enable improvement in future comparisons of study results. PMID:24351185

Medicaid nursing home pay for performance: where do we stand?

PubMed

Arling, Greg; Job, Carol; Cooke, Valerie

2009-10-01

Nursing home pay-for-performance (P4P) programs are intended to maximize the value obtained from public and private expenditures by measuring and rewarding better nursing home performance. We surveyed the 6 states with operational P4P systems in 2007. We describe key features of six Medicaid nursing home P4P systems and make recommendations for further development of nursing home P4P. We surveyed the six states with operational P4P systems in 2007. The range of performance measures employed by the states is quite broad: staffing level and satisfaction, findings from the regulatory system, clinical quality indicators, resident quality of life or satisfaction with care, family satisfaction, access to care for special populations, and efficiency. The main data sources for the measures are the Minimum Data Set (MDS), nursing home inspections, special surveys of nursing home residents, consumers or employees, and facility cost reports or other administrative systems. The most common financial incentive for better performance is a percentage bonus or an add-on to a facility's per diem rate. The bonus is generally proportional to a facility performance score, which consists of simple or weighted sums of scores on individual measures. States undertaking nursing home P4P programs should involve key stakeholders at all stages of P4P system design and implementation. Performance measures should be comprehensive, valid and reliable, risk adjusted where appropriate, and communicated clearly to providers and consumers. The P4P system should encourage provider investment in better care yet recognize state fiscal restraints. Consumer report cards, quality improvement initiatives, and the regulatory process should complement and reinforce P4P. Finally, the P4P system should be transparent and continuously evaluated.

Rotor Hover Performance and Flowfield Measurements with Untwisted and Highly-Twisted Blades

NASA Technical Reports Server (NTRS)

Ramasamy, Manikandan; Gold, Nili P.; Bhagwat, Mahendra J.

2010-01-01

The flowfield and performance characteristics of highly-twisted blades were analyzed at various thrust conditions to improve the fundamental understanding relating the wake effects on rotor performance. Similar measurements made using untwisted blades served as the baseline case. Twisted blades are known to give better hover performance than untwisted blades at high thrust coefficients typical of those found in full-scale rotors. However, the present experiments were conducted at sufficiently low thrust (beginning from zero thrust), where the untwisted blades showed identical, if not better, performance when compared with the highly-twisted blades. The flowfield measurements showed some key wake differences between the two rotors, as well. These observations when combined with simple blade element momentum theory (also called annular disk momentum theory) helped further the understanding of rotor performance characteristics.

Experimentally feasible quantum-key-distribution scheme using qubit-like qudits and its comparison with existing qubit- and qudit-based protocols

NASA Astrophysics Data System (ADS)

Chau, H. F.; Wang, Qinan; Wong, Cardythy

2017-02-01

Recently, Chau [Phys. Rev. A 92, 062324 (2015), 10.1103/PhysRevA.92.062324] introduced an experimentally feasible qudit-based quantum-key-distribution (QKD) scheme. In that scheme, one bit of information is phase encoded in the prepared state in a 2n-dimensional Hilbert space in the form (|i > ±|j >) /√{2 } with n ≥2 . For each qudit prepared and measured in the same two-dimensional Hilbert subspace, one bit of raw secret key is obtained in the absence of transmission error. Here we show that by modifying the basis announcement procedure, the same experimental setup can generate n bits of raw key for each qudit prepared and measured in the same basis in the noiseless situation. The reason is that in addition to the phase information, each qudit also carries information on the Hilbert subspace used. The additional (n -1 ) bits of raw key comes from a clever utilization of this extra piece of information. We prove the unconditional security of this modified protocol and compare its performance with other existing provably secure qubit- and qudit-based protocols on market in the one-way classical communication setting. Interestingly, we find that for the case of n =2 , the secret key rate of this modified protocol using nondegenerate random quantum code to perform one-way entanglement distillation is equal to that of the six-state scheme.

Parameter Estimation with Almost No Public Communication for Continuous-Variable Quantum Key Distribution

NASA Astrophysics Data System (ADS)

Lupo, Cosmo; Ottaviani, Carlo; Papanastasiou, Panagiotis; Pirandola, Stefano

2018-06-01

One crucial step in any quantum key distribution (QKD) scheme is parameter estimation. In a typical QKD protocol the users have to sacrifice part of their raw data to estimate the parameters of the communication channel as, for example, the error rate. This introduces a trade-off between the secret key rate and the accuracy of parameter estimation in the finite-size regime. Here we show that continuous-variable QKD is not subject to this constraint as the whole raw keys can be used for both parameter estimation and secret key generation, without compromising the security. First, we show that this property holds for measurement-device-independent (MDI) protocols, as a consequence of the fact that in a MDI protocol the correlations between Alice and Bob are postselected by the measurement performed by an untrusted relay. This result is then extended beyond the MDI framework by exploiting the fact that MDI protocols can simulate device-dependent one-way QKD with arbitrarily high precision.

Identifying Key Performance Indicators for Holistic Hospital Management with a Modified DEMATEL Approach.

PubMed

Si, Sheng-Li; You, Xiao-Yue; Liu, Hu-Chen; Huang, Jia

2017-08-19

Performance analysis is an important way for hospitals to achieve higher efficiency and effectiveness in providing services to their customers. The performance of the healthcare system can be measured by many indicators, but it is difficult to improve them simultaneously due to the limited resources. A feasible way is to identify the central and influential indicators to improve healthcare performance in a stepwise manner. In this paper, we propose a hybrid multiple criteria decision making (MCDM) approach to identify key performance indicators (KPIs) for holistic hospital management. First, through integrating evidential reasoning approach and interval 2-tuple linguistic variables, various assessments of performance indicators provided by healthcare experts are modeled. Then, the decision making trial and evaluation laboratory (DEMATEL) technique is adopted to build an interactive network and visualize the causal relationships between the performance indicators. Finally, an empirical case study is provided to demonstrate the proposed approach for improving the efficiency of healthcare management. The results show that "accidents/adverse events", "nosocomial infection", ''incidents/errors", "number of operations/procedures" are significant influential indicators. Also, the indicators of "length of stay", "bed occupancy" and "financial measures" play important roles in performance evaluation of the healthcare organization. The proposed decision making approach could be considered as a reference for healthcare administrators to enhance the performance of their healthcare institutions.

University Performance Evaluations: What Are We Really Measuring?

ERIC Educational Resources Information Center

Bedggood, Rowan E.; Donovan, Jerome D.

2012-01-01

Surveying students to garner feedback on teaching and subject quality is a common occurrence in many universities globally. Despite the criticisms surrounding whether measures associated with these surveys are indeed valid, university managers continue to utilise them in key decision making. These surveys mirror business practices where measuring…

Long-distance measurement-device-independent quantum key distribution with coherent-state superpositions.

PubMed

Yin, H-L; Cao, W-F; Fu, Y; Tang, Y-L; Liu, Y; Chen, T-Y; Chen, Z-B

2014-09-15

Measurement-device-independent quantum key distribution (MDI-QKD) with decoy-state method is believed to be securely applied to defeat various hacking attacks in practical quantum key distribution systems. Recently, the coherent-state superpositions (CSS) have emerged as an alternative to single-photon qubits for quantum information processing and metrology. Here, in this Letter, CSS are exploited as the source in MDI-QKD. We present an analytical method that gives two tight formulas to estimate the lower bound of yield and the upper bound of bit error rate. We exploit the standard statistical analysis and Chernoff bound to perform the parameter estimation. Chernoff bound can provide good bounds in the long-distance MDI-QKD. Our results show that with CSS, both the security transmission distance and secure key rate are significantly improved compared with those of the weak coherent states in the finite-data case.

Improved statistical fluctuation analysis for measurement-device-independent quantum key distribution with four-intensity decoy-state method.

PubMed

Mao, Chen-Chen; Zhou, Xing-Yu; Zhu, Jian-Rong; Zhang, Chun-Hui; Zhang, Chun-Mei; Wang, Qin

2018-05-14

Recently Zhang et al [ Phys. Rev. A95, 012333 (2017)] developed a new approach to estimate the failure probability for the decoy-state BB84 QKD system when taking finite-size key effect into account, which offers security comparable to Chernoff bound, while results in an improved key rate and transmission distance. Based on Zhang et al's work, now we extend this approach to the case of the measurement-device-independent quantum key distribution (MDI-QKD), and for the first time implement it onto the four-intensity decoy-state MDI-QKD system. Moreover, through utilizing joint constraints and collective error-estimation techniques, we can obviously increase the performance of practical MDI-QKD systems compared with either three- or four-intensity decoy-state MDI-QKD using Chernoff bound analysis, and achieve much higher level security compared with those applying Gaussian approximation analysis.

Psychometric properties of the Transitions from Foster Care Key Leader Survey.

PubMed

Salazar, Amy M; Brown, Eric C; Monahan, Kathryn C; Catalano, Richard F

2016-04-01

This study summarizes the development and piloting of the Transitions from Foster Care Key Leader Survey (TFC-KLS), an instrument designed to measure change in systems serving young people transitioning from foster care to adulthood. The Jim Casey Youth Opportunity Initiative's logic model was used as a basis for instrument development. The instrument was piloted with 119 key leaders in six communities. Seven of eight latent scales performed well in psychometric testing. The relationships among the 24 measures of system change were explored. A CFA testing overall model fit was satisfactory following slight modifications. Finally, a test of inter-rater reliability between two raters did not find reliable reporting of service availability in a supplemental portion of the survey. The findings were generally positive and supported the validity and utility of the instrument for measuring system change, following some adaptations. Implications for the field are discussed. Copyright © 2015 Elsevier Ltd. All rights reserved.

The evaluation and enhancement of quality, environmental protection and seaport safety by using FAHP

NASA Astrophysics Data System (ADS)

Tadic, Danijela; Aleksic, Aleksandar; Popovic, Pavle; Arsovski, Slavko; Castelli, Ana; Joksimovic, Danijela; Stefanovic, Miladin

2017-02-01

The evaluation and enhancement of business processes in any organization in an uncertain environment presents one of the main requirements of ISO 9000:2008 and has a key effect on competitive advantage and long-term sustainability. The aim of this paper can be defined as the identification and discussion of some of the most important business processes of seaports and the performances of business processes and their key performance indicators (KPIs). The complexity and importance of the treated problem call for analytic methods rather than intuitive decisions. The existing decision variables of the considered problem are described by linguistic expressions which are modelled by triangular fuzzy numbers (TFNs). In this paper, the modified fuzzy extended analytic hierarchy process (FAHP) is proposed. The assessment of the relative importance of each pair of performances and their key performance indicators are stated as a fuzzy group decision-making problem. By using the modified fuzzy extended analytic hierarchy process, the fuzzy rank of business processes of a seaport is obtained. The model is tested through an illustrative example with real-life data, where the obtained data suggest measures which should enhance business strategy and improve key performance indicators. The future improvement is based on benchmark and knowledge sharing.

An Investigation of Measurement Invariance of the Key Stage 2 National Curriculum Science Sampling Test in England

ERIC Educational Resources Information Center

He, Qingping; Anwyll, Steve; Glanville, Matthew; Opposs, Dennis

2014-01-01

Since 2010, the whole national cohort Key Stage 2 (KS2) National Curriculum test in science in England has been replaced with a sampling test taken by pupils at the age of 11 from a nationally representative sample of schools annually. The study reported in this paper compares the performance of different subgroups of the samples (classified by…

International Space Station Major Constituent Analyzer On-Orbit Performance

NASA Technical Reports Server (NTRS)

Gardner, Ben D.; Erwin, Phillip M.; Thoresen, Souzan; Wiedemann, Rachel; Matty, Chris

2015-01-01

The Major Constituent Analyzer is a mass spectrometer based system that measures the major atmospheric constituents on the International Space Station. A number of limited-life components require periodic change-out, including the ORU 02 analyzer and the ORU 08 Verification Gas Assembly. Improvements to ion pump operation and ion source tuning have improved lifetime performance of the current ORU 02 design. The most recent ORU 02 analyzer assemblies, as well as ORU 08, have operated nominally. For ORU 02, the ion source filaments and ion pump lifetime continue to be key determinants of MCA performance and logistical support. Monitoring several key parameters provides the capacity to monitor ORU health and properly anticipate end of life.

The Changing Nature of Performance: Implications for Staffing, Motivation, and Development. Frontiers of Industrial and Organizational Psychology.

ERIC Educational Resources Information Center

Ilgen, Daniel R., Ed.; Pulakos, Elaine D., Ed.

This volume provides a discussion of the relationship between the changing nature of work and the understanding, measurement, and influence of human performance. Chapter 1, Employee Performance in Today's Organizations (Daniel R. Ilgen, Elaine D. Pulakos), introduces seven key changes in the nature of work--changes in technology, job design, type…

An Examination of Performance-Based Teacher Evaluation Systems in Five States. Summary. Issues & Answers. REL 2012-No. 129

ERIC Educational Resources Information Center

Shakman, Karen; Riordan, Julie; Sanchez, Maria Teresa; Cook, Kyle DeMeo; Fournier, Richard; Brett, Jessica

2012-01-01

This study reports on performance-based teacher evaluation systems in five states that have implemented such systems. It investigates two primary research questions: (1) What are the key characteristics of state-level performance-based teacher evaluation systems in the study states?; and (2) How do state teacher evaluation measures, the teaching…

Medicaid Nursing Home Pay for Performance: Where Do We Stand?

ERIC Educational Resources Information Center

Arling, Greg; Job, Carol; Cooke, Valerie

2009-01-01

Purpose: Nursing home pay-for-performance (P4P) programs are intended to maximize the value obtained from public and private expenditures by measuring and rewarding better nursing home performance. We surveyed the 6 states with operational P4P systems in 2007. We describe key features of six Medicaid nursing home P4P systems and make…

Evaluation of the Aurora Application Shade Measurement Accuracy

DOE Office of Scientific and Technical Information (OSTI.GOV)

2015-12-01

Aurora is an integrated, Web-based application that helps solar installers perform sales, engineering design, and financial analysis. One of Aurora's key features is its high-resolution remote shading analysis.

CCQM K6.2 determination of total cholesterol in human serum

NASA Astrophysics Data System (ADS)

Wise, Stephen A.; Phinney, Karen W.; Duewer, David L.; Sniegoski, Lorna T.; Welch, Michael J.; Pabello, Guiomar; Avila Caldero, Marco A.; Qinde, Liu; Kooi, Lee Tong; Rego, Eliane; Garrido, Bruno; Allegri, Gabriella; de La Cruz, Marcia; Barrabin, Juliana; Puglisi, Celia; Lopez, Eduardo; Lee, Hwashim; Kim, Byungjoo; Delatour, Vincent; Heuillet, Maud; Nammoonnoy, Jintana; Ceyhan Gören, Ahmet; Bilsel, Gokhan; Konopelko, L.; Krylov, A.; Lopushanskaya, E.

2018-01-01

Cholesterol is one of the most frequently measured substances in human blood/serum to assist in assessing the health status of individuals. Because of its clinical significance, CCQM-K6 determination of cholesterol in serum was completed in 2000 as one of the first key comparison (KC) studies performed within the Organic Analysis Working Group (OAWG). The first subsequent KC for cholesterol, CCQM-K6.1, was completed in 2001. Measurements for this second subsequent, CCQM-K6.2, were completed in 2012. These subsequent comparisons were conducted to enable CCQM members that had not participated in earlier studies to demonstrate their capabilities to measure a nonpolar (pKow < ‑2), low molecular mass (100 g/mol to 500 g/mol) metabolite in human serum at relatively high concentrations (1 mg/g to 3 mg/g) found in normal populations. Successful participation in CCQM-K6.2 demonstrated capabilities in analysis of complex biological matrices including sample preparation (extraction, derivatization), LC or GC separation, and quantification using an isotope dilution mass spectrometry approach. Normally in a subsequent KC, no key comparison reference value (KCRV) would be established and assessment of performance would be via the deviation of participants' results to the anchor institute's results, adjusted to account for the anchor's performance in the original comparison versus its KCRV. Due to the very long-time period since the original key comparison, the OAWG decided that this did not represent the best approach to assess performance in what is a relatively complex measurement. Given the excellent agreement between the anchor institute's results and robust consensus summary of the participants' values, the reference value for this study was taken as the anchor institute's result and treated as a 'KCRV'. Seven of the nine participants demonstrated agreement with the reference value. Main text To reach the main text of this paper, click on Final Report. Note that this text is that which appears in Appendix B of the BIPM key comparison database kcdb.bipm.org/. The final report has been peer-reviewed and approved for publication by the CCQM, according to the provisions of the CIPM Mutual Recognition Arrangement (CIPM MRA).

Multispectral and hyperspectral measurements of soldier's camouflage equipment

NASA Astrophysics Data System (ADS)

Kastek, Mariusz; Piątkowski, Tadeusz; Dulski, Rafal; Chamberland, Martin; Lagueux, Philippe; Farley, Vincent

2012-06-01

In today's electro-optic warfare era, it is more than vital for one nation's defense to possess the most advanced measurement and signature intelligence (MASINT) capabilities. This is critical to gain a strategic advantage in the planning of the military operations and deployments. The thermal infrared region of the electromagnetic spectrum is a key region that is exploited for infrared reconnaissance and surveillance missions. The Military University of Technology has conducted an intensive measurement campaign of various soldier's camouflage devices in the scope of building a database of infrared signatures. One of today's key technologies required to perform signature measurements has become infrared hyperspectral and broadband/multispectral imaging sensors. The Telops Hyper-Cam LW product represents a unique commercial offering with outstanding performances and versatility for the collection of hyperspectral infrared images. The Hyper-Cam allows for the infrared imagery of a target (320 × 256 pixels) at a very high spectral resolution (down to 0.25 cm-1). Moreover, the Military University of Technology has made use of a suite of scientific grade commercial infrared cameras to further measure and assess the targets from a broadband/multispectral perspective. The experiment concept and measurement results are presented in this paper.

Channel-Based Key Generation for Encrypted Body-Worn Wireless Sensor Networks.

PubMed

Van Torre, Patrick

2016-09-08

Body-worn sensor networks are important for rescue-workers, medical and many other applications. Sensitive data are often transmitted over such a network, motivating the need for encryption. Body-worn sensor networks are deployed in conditions where the wireless communication channel varies dramatically due to fading and shadowing, which is considered a disadvantage for communication. Interestingly, these channel variations can be employed to extract a common encryption key at both sides of the link. Legitimate users share a unique physical channel and the variations thereof provide data series on both sides of the link, with highly correlated values. An eavesdropper, however, does not share this physical channel and cannot extract the same information when intercepting the signals. This paper documents a practical wearable communication system implementing channel-based key generation, including an implementation and a measurement campaign comprising indoor as well as outdoor measurements. The results provide insight into the performance of channel-based key generation in realistic practical conditions. Employing a process known as key reconciliation, error free keys are generated in all tested scenarios. The key-generation system is computationally simple and therefore compatible with the low-power micro controllers and low-data rate transmissions commonly used in wireless sensor networks.

2 Tbit/s free-space data transmission on two orthogonal orbital-angular-momentum beams each carrying 25 WDM channels.

PubMed

Fazal, Irfan M; Ahmed, Nisar; Wang, Jian; Yang, Jeng-Yuan; Yan, Yan; Shamee, Bishara; Huang, Hao; Yue, Yang; Dolinar, Sam; Tur, Moshe; Willner, Alan E

2012-11-15

We demonstrate a 2 Tbit/s free-space data link using two orthogonal orbital angular momentum beams each carrying 25 different wavelength-division-multiplexing channels. We measure the performance for different modulation formats, including directly detected 40 Gbit/s nonreturn-to-zero (NRZ) differential phase-shift keying, 40 Gbit/s NRZ on-off keying, and coherently-detected 10 Gbaud NRZ quadrature phase-shift keying, and achieve low bit error rates with penalties less than 5 dB.

Reaction time, inhibition, working memory and ‘delay aversion’ performance: genetic influences and their interpretation

PubMed Central

KUNTSI, JONNA; ROGERS, HANNAH; SWINARD, GREER; BÖRGER, NORBERT; van der MEERE, JAAP; RIJSDIJK, FRUHLING; ASHERSON, PHILIP

2013-01-01

Background For candidate endophenotypes to be useful for psychiatric genetic research, they first of all need to show significant genetic influences. To address the relative lack of previous data, we set to investigate the extent of genetic and environmental influences on performance in a set of theoretically driven cognitive-experimental tasks in a large twin sample. We further aimed to illustrate how test–retest reliability of the measures affects the estimates. Method Four-hundred 7- to 9-year-old twin pairs were assessed individually on tasks measuring reaction time, inhibition, working memory and ‘delay aversion’ performance. Test–retest reliability data on some of the key measures were available from a previous study. Results Several key measures of reaction time, inhibition and working-memory performance indicated a moderate degree of genetic influence. Combining data across theoretically related tasks increased the heritability estimates, as illustrated by the heritability estimates of 60% for mean reaction time and 50% for reaction-time variability. Psychometric properties (reliability or ceiling effects) had a substantial influence on the estimates for some measures. Conclusions The data support the usefulness of several of the variables for endophenotype studies that aim to link genes to cognitive and motivational processes. Importantly, the data also illustrate specific conditions under which the true extent of genetic influences may be underestimated and hence the usefulness for genetic mapping studies compromised, and suggest ways to address this. PMID:16882357

Self-referenced continuous-variable quantum key distribution

DOEpatents

Soh, Daniel B. S.; Sarovar, Mohan; Camacho, Ryan

2017-01-24

Various technologies for continuous-variable quantum key distribution without transmitting a transmitter's local oscillator are described herein. A receiver on an optical transmission channel uses an oscillator signal generated by a light source at the receiver's location to perform interferometric detection on received signals. An optical reference pulse is sent by the transmitter on the transmission channel and the receiver computes a phase offset of the transmission based on quadrature measurements of the reference pulse. The receiver can then compensate for the phase offset between the transmitter's reference and the receiver's reference when measuring quadratures of received data pulses.

Aerodynamic Performance of a Compact, High Work-Factor Centrifugal Compressor at the Stage and Subcomponent Level

NASA Technical Reports Server (NTRS)

Braunscheidel, Edward P.; Welch, Gerard E.; Skoch, Gary J.; Medic, Gorazd; Sharma, Om P.

2015-01-01

The measured aerodynamic performance of a compact, high work-factor, single-stage centrifugal compressor, comprising an impeller, diffuser, 90deg-bend, and exit guide vane is reported. Performance levels are based on steady-state total-pressure and total-temperature rake and angularity-probe data acquired at key machine rating planes during recent testing at NASA Glenn Research Center. Aerodynamic performance at the stage level is reported for operation between 70 to 105 percent of design corrected speed, with subcomponent (impeller, diffuser, and exit-guide-vane) flow field measurements presented and discussed at the 100 percent design-speed condition. Individual component losses from measurements are compared with pre-test CFD predictions on a limited basis.

Aerodynamic Performance of a Compact, High Work-Factor Centrifugal Compressor at the Stage and Subcomponent Level

NASA Technical Reports Server (NTRS)

Braunscheidel, Edward P.; Welch, Gerard E.; Skoch, Gary J.; Medic, Gorazd; Sharma, Om P.

2014-01-01

The measured aerodynamic performance of a compact, high work-factor, single-stage centrifugal compressor, comprising an impeller, diffuser, 90º-bend, and exit guide vane is reported. Performance levels are based on steady-state total-pressure and total-temperature rake and angularity-probe data acquired at key machine rating planes during recent testing at NASA Glenn Research Center. Aerodynamic performance at the stage level is reported for operation between 70 to 105% of design corrected speed, with subcomponent (impeller, diffuser, and exit-guide-vane) flow field measurements presented and discussed at the 100% design-speed condition. Individual component losses from measurements are compared with pre-test CFD predictions on a limited basis.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hong, Tao; Niu, Zhenbin; Hu, Xunxiang

The development of high performance materials for CO 2 separation and capture will significantly contribute to a solution for climate change. In this work, (bicycloheptenyl) ethyl terminated polydimethylsiloxane (PDMSPNB) membranes with varied cross-link densities were synthesized via ring-opening metathesis polymerization. The developed polymer membranes show higher permeability and better selectivity than those of conventional cross-linked PDMS membrane. The achieved performance (CO 2 permeability ~ 6800 Barrer and CO 2/N 2 selectivity ~ 14) is very promising for practical applications. The key to achieving this high performance is the use of an in-situ cross-linking method of the difunctional PDMS macromonomers, whichmore » provides lightly cross-linked membranes. By combining positron annihilation lifetime spectroscopy, broadband dielectric spectroscopy and gas solubility measurements, we have elucidated the key parameters necessary for achieving their excellent performance.« less

KPI Student Executive Summary Report, Winter 2002.

ERIC Educational Resources Information Center

Sheridan Coll. (Ontario).

In the mid-1990s, the Ontario Government decided to enhance the accountability of the Colleges of Applied Arts and Technology by measuring and rewarding their performance in meeting specific goals and outcomes. The KPI (Key Performance Indicators) Satisfaction Survey is a tool developed by the Ministry of Training Colleges and Universities in…

A National Estimate of Performance: Statewide Highway Safety Program Assessment.

ERIC Educational Resources Information Center

National Highway Traffic Safety Administration (DOT), Washington, DC.

A nationwide systematic approach to assess the developments and achievements of highway safety activities was conducted to measure program outputs from 1969 through 1974 using key indicators of performance such as ratios and percentages. A sample of 10 states was selected with overall sample of 105 local jurisdictions which would provide estimated…

Performance Indicators, Accountability, and Quality: An Analysis of Key Indicators at Two Georgia Postsecondary Institutions

ERIC Educational Resources Information Center

Christopher, Minolar T.

2010-01-01

Quality in higher education today is often measured by institutional accountability indicators. The purpose of this study was to examine trends and explore correlational relationships of the performance indicators deemed important to the stakeholders of two postsecondary institutions in the State of Georgia--retention rate, graduation rate, and…

Earth Observing Scanning Polarimeter (EOSP), phase B

NASA Technical Reports Server (NTRS)

1990-01-01

Evaluations performed during a Phase B study directed towards defining an optimal design for the Earth Observing Scanning Polarimeter (EOSP) instrument is summarized. An overview of the experiment approach is included which provides a summary of the scientific objectives, the background of the measurement approach, and the measurement method. In the instrumentation section, details of the design are discussed starting with the key instrument features required to accomplish the scientific objectives and a system characterization in terms of the Stokes vector/Mueller matrix formalism. This is followed by a detailing of the instrument design concept, the design of the individual elements of the system, the predicted performance, and a summary of appropriate instrument testing and calibration. The selected design makes use of key features of predecessor polarimeters and is fully compatible with the Earth Observing System spacecraft requirements.

Biased three-intensity decoy-state scheme on the measurement-device-independent quantum key distribution using heralded single-photon sources.

PubMed

Zhang, Chun-Hui; Zhang, Chun-Mei; Guo, Guang-Can; Wang, Qin

2018-02-19

At present, most of the measurement-device-independent quantum key distributions (MDI-QKD) are based on weak coherent sources and limited in the transmission distance under realistic experimental conditions, e.g., considering the finite-size-key effects. Hence in this paper, we propose a new biased decoy-state scheme using heralded single-photon sources for the three-intensity MDI-QKD, where we prepare the decoy pulses only in X basis and adopt both the collective constraints and joint parameter estimation techniques. Compared with former schemes with WCS or HSPS, after implementing full parameter optimizations, our scheme gives distinct reduced quantum bit error rate in the X basis and thus show excellent performance, especially when the data size is relatively small.

MTF measurement of IR optics in different temperature ranges

NASA Astrophysics Data System (ADS)

Bai, Alexander; Duncker, Hannes; Dumitrescu, Eugen

2017-10-01

Infrared (IR) optical systems are at the core of many military, civilian and manufacturing applications and perform mission critical functions. To reliably fulfill the demanding requirements imposed on today's high performance IR optics, highly accurate, reproducible and fast lens testing is of crucial importance. Testing the optical performance within different temperature ranges becomes key in many military applications. Due to highly complex IR-Applications in the fields of aerospace, military and automotive industries, MTF Measurement under realistic environmental conditions become more and more relevant. A Modulation Transfer Function (MTF) test bench with an integrated thermal chamber allows measuring several sample sizes in a temperature range from -40 °C to +120°C. To reach reliable measurement results under these difficult conditions, a specially developed temperature stable design including an insulating vacuum are used. The main function of this instrument is the measurement of the MTF both on- and off-axis at up to +/-70° field angle, as well as measurement of effective focal length, flange focal length and distortion. The vertical configuration of the system guarantees a small overall footprint. By integrating a high-resolution IR camera with focal plane array (FPA) in the detection unit, time consuming measurement procedures such as scanning slit with liquid nitrogen cooled detectors can be avoided. The specified absolute accuracy of +/- 3% MTF is validated using internationally traceable reference optics. Together with a complete and intuitive software solution, this makes the instrument a turn-key device for today's state-of- the-art optical testing.

Achieving continuous improvement in laboratory organization through performance measurements: a seven-year experience.

PubMed

Salinas, Maria; López-Garrigós, Maite; Gutiérrez, Mercedes; Lugo, Javier; Sirvent, Jose Vicente; Uris, Joaquin

2010-01-01

Laboratory performance can be measured using a set of model key performance indicators (KPIs). The design and implementation of KPIs are important issues. KPI results from 7 years are reported and their implementation, monitoring, objectives, interventions, result reporting and delivery are analyzed. The KPIs of the entire laboratory process were obtained using Laboratory Information System (LIS) registers. These were collected automatically using a data warehouse application, spreadsheets and external quality program reports. Customer satisfaction was assessed using surveys. Nine model laboratory KPIs were proposed and measured. The results of some examples of KPIs used in our laboratory are reported. Their corrective measurements or the implementation of objectives led to improvement in the associated KPIs results. Measurement of laboratory performance using KPIs and a data warehouse application that continuously collects registers and calculates KPIs confirmed the reliability of indicators, indicator acceptability and usability for users, and continuous process improvement.

Multiparty Quantum Direct Secret Sharing of Classical Information with Bell States and Bell Measurements

NASA Astrophysics Data System (ADS)

Song, Yun; Li, Yongming; Wang, Wenhua

2018-02-01

This paper proposed a new and efficient multiparty quantum direct secret sharing (QDSS) by using swapping quantum entanglement of Bell states. In the proposed scheme, the quantum correlation between the possible measurement results of the members (except dealer) and the original local unitary operation encoded by the dealer was presented. All agents only need to perform Bell measurements to share dealer's secret by recovering dealer's operation without performing any unitary operation. Our scheme has several advantages. The dealer is not required to retain any photons, and can further share a predetermined key instead of a random key to the agents. It has high capacity as two bits of secret messages can be transmitted by an EPR pair and the intrinsic efficiency approaches 100%, because no classical bit needs to be transmitted except those for detection. Without inserting any checking sets for detecting the eavesdropping, the scheme can resist not only the existing attacks, but also the cheating attack from the dishonest agent.

What's working, what's not: The monitoring and reporting system for Tasmania's national parks and reserves

Treesearch

Glenys Jones

2015-01-01

This paper describes the Australian State of Tasmania's management effectiveness Monitoring and Reporting System for national parks and reserves. This jurisdictional performance measurement system is designed to provide all interested parties with reliable factual information and measured evidence about reserve management achievements, progress and challenges. Key...

Key Performance Indicators in Radiology: You Can't Manage What You Can't Measure.

PubMed

Harvey, H Benjamin; Hassanzadeh, Elmira; Aran, Shima; Rosenthal, Daniel I; Thrall, James H; Abujudeh, Hani H

2016-01-01

Quality assurance (QA) is a fundamental component of every successful radiology operation. A radiology QA program must be able to efficiently and effectively monitor and respond to quality problems. However, as radiology QA has expanded into the depths of radiology operations, the task of defining and measuring quality has become more difficult. Key performance indicators (KPIs) are highly valuable data points and measurement tools that can be used to monitor and evaluate the quality of services provided by a radiology operation. As such, KPIs empower a radiology QA program to bridge normative understandings of health care quality with on-the-ground quality management. This review introduces the importance of KPIs in health care QA, a framework for structuring KPIs, a method to identify and tailor KPIs, and strategies to analyze and communicate KPI data that would drive process improvement. Adopting a KPI-driven QA program is both good for patient care and allows a radiology operation to demonstrate measurable value to other health care stakeholders. Copyright © 2015 Mosby, Inc. All rights reserved.

Performance Simulations for a Spaceborne Methane Lidar Mission

NASA Technical Reports Server (NTRS)

Kiemle, C.; Kawa, Stephan Randolph; Quatrevalet, Mathieu; Browell, Edward V.

2014-01-01

Future spaceborne lidar measurements of key anthropogenic greenhouse gases are expected to close current observational gaps particularly over remote, polar, and aerosol-contaminated regions, where actual in situ and passive remote sensing observation techniques have difficulties. For methane, a "Methane Remote Lidar Mission" was proposed by Deutsches Zentrum fuer Luft- und Raumfahrt and Centre National d'Etudes Spatiales in the frame of a German-French climate monitoring initiative. Simulations assess the performance of this mission with the help of Moderate Resolution Imaging Spectroradiometer and Cloud-Aerosol Lidar and Infrared Pathfinder Satellite Observations of the earth's surface albedo and atmospheric optical depth. These are key environmental parameters for integrated path differential absorption lidar which uses the surface backscatter to measure the total atmospheric methane column. Results showthat a lidar with an average optical power of 0.45W at 1.6 µm wavelength and a telescope diameter of 0.55 m, installed on a low Earth orbit platform(506 km), will measure methane columns at precisions of 1.2%, 1.7%, and 2.1% over land, water, and snow or ice surfaces, respectively, for monthly aggregated measurement samples within areas of 50 × 50 km2. Globally, the mean precision for the simulated year 2007 is 1.6%, with a standard deviation of 0.7%. At high latitudes, a lower reflectance due to snow and ice is compensated by denser measurements, owing to the orbital pattern. Over key methane source regions such as densely populated areas, boreal and tropical wetlands, or permafrost, our simulations show that the measurement precision will be between 1 and 2%.

Management Practices. U.S. Companies Improve Performance through Quality Efforts. Report to the Honorable Donald Ritter, House of Representatives.

ERIC Educational Resources Information Center

General Accounting Office, Washington, DC. National Security and International Affairs Div.

The General Accounting Office (GAO) examined the impact of formal total quality management (TQM) practices on the performance of 20 selected U.S. companies that were among the highest-scoring applicants in 1988 and 1989 for the Malcolm Baldridge National Quality Award. Several key indicators used by companies to measure performance were analyzed.…

Changes in Serial Optical Topography and TMS during Task Performance after Constraint-Induced Movement Therapy in Stroke: A Case Study

PubMed Central

Park, Si-Woon; Butler, Andrew J.; Cavalheiro, Vanessa; Alberts, Jay L.; Wolf, Steven L.

2013-01-01

The authors examined serial changes in optical topography in a stroke patient performing a functional task, as well as clinical and physiologic measures while undergoing constraint-induced therapy (CIT). A 73-year-old right hemiparetic patient, who had a subcortical stroke 4 months previously, received 2 weeks of CIT. During the therapy, daily optical topography imaging using near-infrared light was measured serially while the participant performed a functional key-turning task. Clinical outcome measures included the Wolf Motor Function Test (WMFT), Motor Activity Log (MAL), and functional key grip test. Transcranial magnetic stimulation (TMS) and functional magnetic resonance imaging (fMRI) were also used to map cortical areas and hemodynamic brain responses, respectively. Optical topography measurement showed an overall decrease in oxy-hemoglobin concentration in both hemispheres as therapy progressed and the laterality index increased toward the contralateral hemisphere. An increased TMS motor map area was observed in the contralateral cortex following treatment. Posttreatment fMRI showed bilateral primary motor cortex activation, although slightly greater in the contralateral hemisphere, during affected hand movement. Clinical scores revealed marked improvement in functional activities. In one patient who suffered a stroke, 2 weeks of CIT led to improved function and cortical reorganization in the hemisphere contralateral to the affected hand. PMID:15228805

GUI for Coordinate Measurement of an Image for the Estimation of Geometric Distortion of an Opto-electronic Display System

NASA Astrophysics Data System (ADS)

Saini, Surender Singh; Sardana, Harish Kumar; Pattnaik, Shyam Sundar

2017-06-01

Conventional image editing software in combination with other techniques are not only difficult to apply to an image but also permits a user to perform some basic functions one at a time. However, image processing algorithms and photogrammetric systems are developed in the recent past for real-time pattern recognition applications. A graphical user interface (GUI) is developed which can perform multiple functions simultaneously for the analysis and estimation of geometric distortion in an image with reference to the corresponding distorted image. The GUI measure, record, and visualize the performance metric of X/Y coordinates of one image over the other. The various keys and icons provided in the utility extracts the coordinates of distortion free reference image and the image with geometric distortion. The error between these two corresponding points gives the measure of distortion and also used to evaluate the correction parameters for image distortion. As the GUI interface minimizes human interference in the process of geometric correction, its execution just requires use of icons and keys provided in the utility; this technique gives swift and accurate results as compared to other conventional methods for the measurement of the X/Y coordinates of an image.

Body measurements of Chinese males in dynamic postures and application.

PubMed

Wang, Y J; Mok, P Y; Li, Y; Kwok, Y L

2011-11-01

It is generally accepted that there is a relationship between body dimensions, body movement and clothing wearing ease design, and yet previous research in this area has been neither sufficient nor systematic. This paper proposes a method to measure the human body in the static state and in 17 dynamic postures, so as to understand dimensional changes of different body parts during dynamic movements. Experimental work is carried out to collect 30 measurements of 10 male Chinese subjects in both static and dynamic states. Factor analysis is used to analyse body measurement data in a static state, and such key measurements describe the characteristics of different body figures. Moreover, one-way ANOVA is used to analyse how dynamic postures affect these key body measurements. Finally, an application of the research results is suggested: a dynamic block patternmaking method for high-performance clothing design. Copyright © 2011 Elsevier Ltd and The Ergonomics Society. All rights reserved.

Making Professional Decisions in Research: Measurement and Key Predictors

PubMed Central

Antes, Alison L.; Chibnall, John T.; Baldwin, Kari A.; Tait, Raymond C.; Vander Wal, Jillon S.; DuBois, James M.

2016-01-01

The professional decision-making in research (PDR) measure was administered to 400 NIH-funded and industry-funded investigators, along with measures of cynicism, moral disengagement, compliance disengagement, impulsivity, work stressors, knowledge of responsible conduct of research (RCR), and socially desirable response tendencies. Negative associations were found for the PDR and measures of cynicism, moral disengagement, and compliance disengagement, while positive associations were found for the PDR and RCR knowledge and positive urgency, an impulsivity subscale. PDR scores were not related to socially desirable responding, or to measures of work stressors and the remaining impulsivity subscales. In a multivariate logistic regression analysis, lower moral disengagement scores, higher RCR knowledge, and identifying the United States as one’s nation of origin emerged as key predictors of stronger performance on the PDR. The implications of these findings for understanding the measurement of decision-making in research and future directions for research and RCR education are discussed. PMID:27093003

A measurement-based performability model for a multiprocessor system

NASA Technical Reports Server (NTRS)

Ilsueh, M. C.; Iyer, Ravi K.; Trivedi, K. S.

1987-01-01

A measurement-based performability model based on real error-data collected on a multiprocessor system is described. Model development from the raw errror-data to the estimation of cumulative reward is described. Both normal and failure behavior of the system are characterized. The measured data show that the holding times in key operational and failure states are not simple exponential and that semi-Markov process is necessary to model the system behavior. A reward function, based on the service rate and the error rate in each state, is then defined in order to estimate the performability of the system and to depict the cost of different failure types and recovery procedures.

Quality of Type II Diabetes Care in Primary Health Care Centers in Kuwait: Employment of a Diabetes Quality Indicator Set (DQIS).

PubMed

Badawi, Dalia; Saleh, Shadi; Natafgi, Nabil; Mourad, Yara; Behbehani, Kazem

2015-01-01

Diabetes Mellitus is one of the major public health challenges, affecting more than 347 million adults worldwide. The impact of diabetes necessitates assessing the quality of care received by people with diabetes, especially in countries with a significant diabetes burden such as Kuwait. This paper aimed at piloting an approach for measuring Type II diabetes care performance through the use of a diabetes quality indicator set (DQIS) in primary health care. The DQIS for Kuwait was adapted from that developed by the National Diabetes Quality Improvement Alliance and the International Diabetes Federation. Five key care domains/measures were employed: (1) Blood glucose level measurement, (2) Cholesterol level measurement, (3) Blood pressure measurement, (4) Kidney function testing and (5) Smoking status check. The sample included the four major primary health care centers with the highest case load in Kuwait City, 4,241 patients in 2012 and 3,211 in 2010. Findings revealed the applicability and utility of employing performance indicators for diabetes care in Kuwait. Furthermore, findings revealed that many of the primary health care centers have achieved noteworthy improvement in diabetes care between 2010 and 2012, with the exception of smoking status check. The DQIS can help policymakers identify performance gaps and investigate key system roadblocks related to diabetes care in Kuwait.

Emotional Intelligence and Emotions Associated with Optimal and Dysfunctional Athletic Performance

PubMed Central

Lane, Andrew M.; Devonport, Tracey J.; Soos, Istvan; Karsai, Istvan; Leibinger, Eva; Hamar, Pal

2010-01-01

This study investigated relationships between self-report measures of emotional intelligence and memories of pre-competitive emotions before optimal and dysfunctional athletic performance. Participant-athletes (n = 284) completed a self-report measure of emotional intelligence and two measures of pre-competitive emotions; a) emotions experienced before an optimal performance, and b) emotions experienced before a dysfunctional performance. Consistent with theoretical predictions, repeated MANOVA results demonstrated pleasant emotions associated with optimal performance and unpleasant emotions associated with dysfunctional performance. Emotional intelligence correlated with pleasant emotions in both performances with individuals reporting low scores on the self-report emotional intelligence scale appearing to experience intense unpleasant emotions before dysfunctional performance. We suggest that future research should investigate relationships between emotional intelligence and emotion-regulation strategies used by athletes. Key points Athletes reporting high scores of self-report emotional intelligence tend to experience pleasant emotions. Optimal performance is associated with pleasant emotions and dysfunctional performance is associated with unpleasant emotions. Emotional intelligence might help athletes recognize which emotional states help performance. PMID:24149631

Emotional intelligence and emotions associated with optimal and dysfunctional athletic performance.

PubMed

Lane, Andrew M; Devonport, Tracey J; Soos, Istvan; Karsai, Istvan; Leibinger, Eva; Hamar, Pal

2010-01-01

This study investigated relationships between self-report measures of emotional intelligence and memories of pre-competitive emotions before optimal and dysfunctional athletic performance. Participant-athletes (n = 284) completed a self-report measure of emotional intelligence and two measures of pre-competitive emotions; a) emotions experienced before an optimal performance, and b) emotions experienced before a dysfunctional performance. Consistent with theoretical predictions, repeated MANOVA results demonstrated pleasant emotions associated with optimal performance and unpleasant emotions associated with dysfunctional performance. Emotional intelligence correlated with pleasant emotions in both performances with individuals reporting low scores on the self-report emotional intelligence scale appearing to experience intense unpleasant emotions before dysfunctional performance. We suggest that future research should investigate relationships between emotional intelligence and emotion-regulation strategies used by athletes. Key pointsAthletes reporting high scores of self-report emotional intelligence tend to experience pleasant emotions.Optimal performance is associated with pleasant emotions and dysfunctional performance is associated with unpleasant emotions.Emotional intelligence might help athletes recognize which emotional states help performance.

Improved reliability of pH measurements.

PubMed

Spitzer, Petra; Werner, Barbara

2002-11-01

Measurements of pH are performed on a large scale at laboratory level, and in industry. To meet the quality-control requirements and other technical specifications there is a need for traceability in measurement results. The prerequisite for the international acceptance of analytical data is reliability. To measure means to compare. Comparability entails use of recognised references to which the standard buffer solutions used for calibration of pH meter-electrode assemblies can be traced. The new recommendation on the measurement of pH recently published as a provisional document by the International Union on Pure and Applied Chemistry (IUPAC) enables traceability for measured pH values to a conventional reference frame which is recognised world-wide. The primary method for pH will be described. If analytical data are to be accepted internationally it is necessary to demonstrate the equivalence of the national traceability structures, including national measurement standards. For the first time key comparisons for pH have been performed by the Consultative Committee for Amount of Substance (CCQM, set up by the International Bureau of Weights and Measures, BIPM) to assess the equivalence of the national measurement procedures used to determine the pH of primary standard buffer solutions. The results of the first key comparison on pH CCQM-K9, and other international initiatives to improve the consistency of the results of measurement for pH, are reported.

Reducing the overlay metrology sensitivity to perturbations of the measurement stack

NASA Astrophysics Data System (ADS)

Zhou, Yue; Park, DeNeil; Gutjahr, Karsten; Gottipati, Abhishek; Vuong, Tam; Bae, Sung Yong; Stokes, Nicholas; Jiang, Aiqin; Hsu, Po Ya; O'Mahony, Mark; Donini, Andrea; Visser, Bart; de Ruiter, Chris; Grzela, Grzegorz; van der Laan, Hans; Jak, Martin; Izikson, Pavel; Morgan, Stephen

2017-03-01

Overlay metrology setup today faces a continuously changing landscape of process steps. During Diffraction Based Overlay (DBO) metrology setup, many different metrology target designs are evaluated in order to cover the full process window. The standard method for overlay metrology setup consists of single-wafer optimization in which the performance of all available metrology targets is evaluated. Without the availability of external reference data or multiwafer measurements it is hard to predict the metrology accuracy and robustness against process variations which naturally occur from wafer-to-wafer and lot-to-lot. In this paper, the capabilities of the Holistic Metrology Qualification (HMQ) setup flow are outlined, in particular with respect to overlay metrology accuracy and process robustness. The significance of robustness and its impact on overlay measurements is discussed using multiple examples. Measurement differences caused by slight stack variations across the target area, called grating imbalance, are shown to cause significant errors in the overlay calculation in case the recipe and target have not been selected properly. To this point, an overlay sensitivity check on perturbations of the measurement stack is presented for improvement of the overlay metrology setup flow. An extensive analysis on Key Performance Indicators (KPIs) from HMQ recipe optimization is performed on µDBO measurements of product wafers. The key parameters describing the sensitivity to perturbations of the measurement stack are based on an intra-target analysis. Using advanced image analysis, which is only possible for image plane detection of μDBO instead of pupil plane detection of DBO, the process robustness performance of a recipe can be determined. Intra-target analysis can be applied for a wide range of applications, independent of layers and devices.

Enrichment Assay Methods Development for the Integrated Cylinder Verification System

DOE Office of Scientific and Technical Information (OSTI.GOV)

Smith, Leon E.; Misner, Alex C.; Hatchell, Brian K.

2009-10-22

International Atomic Energy Agency (IAEA) inspectors currently perform periodic inspections at uranium enrichment plants to verify UF6 cylinder enrichment declarations. Measurements are typically performed with handheld high-resolution sensors on a sampling of cylinders taken to be representative of the facility's entire product-cylinder inventory. Pacific Northwest National Laboratory (PNNL) is developing a concept to automate the verification of enrichment plant cylinders to enable 100 percent product-cylinder verification and potentially, mass-balance calculations on the facility as a whole (by also measuring feed and tails cylinders). The Integrated Cylinder Verification System (ICVS) could be located at key measurement points to positively identify eachmore » cylinder, measure its mass and enrichment, store the collected data in a secure database, and maintain continuity of knowledge on measured cylinders until IAEA inspector arrival. The three main objectives of this FY09 project are summarized here and described in more detail in the report: (1) Develop a preliminary design for a prototype NDA system, (2) Refine PNNL's MCNP models of the NDA system, and (3) Procure and test key pulse-processing components. Progress against these tasks to date, and next steps, are discussed.« less

Experimental quantum key distribution with finite-key security analysis for noisy channels.

PubMed

Bacco, Davide; Canale, Matteo; Laurenti, Nicola; Vallone, Giuseppe; Villoresi, Paolo

2013-01-01

In quantum key distribution implementations, each session is typically chosen long enough so that the secret key rate approaches its asymptotic limit. However, this choice may be constrained by the physical scenario, as in the perspective use with satellites, where the passage of one terminal over the other is restricted to a few minutes. Here we demonstrate experimentally the extraction of secure keys leveraging an optimal design of the prepare-and-measure scheme, according to recent finite-key theoretical tight bounds. The experiment is performed in different channel conditions, and assuming two distinct attack models: individual attacks or general quantum attacks. The request on the number of exchanged qubits is then obtained as a function of the key size and of the ambient quantum bit error rate. The results indicate that viable conditions for effective symmetric, and even one-time-pad, cryptography are achievable.

Choice with a fixed requirement for food, and the generality of the matching relation

PubMed Central

Stubbs, D. Alan; Dreyfus, Leon R.; Fetterman, J. Gregor; Dorman, Lana G.

1986-01-01

Pigeons were trained on choice procedures in which responses on each of two keys were reinforced probabilistically, but only after a schedule requirement had been met. Under one arrangement, a fixed-interval choice procedure was used in which responses were not reinforced until the interval was over; then a response on one key would be reinforced, with the effective key changing irregularly from interval to interval. Under a second, fixed-ratio choice procedure, responses on either key counted towards completion of the ratio and then, once the ratio had been completed, a response on the probabilistically selected key would produce food. In one experiment, the schedule requirements were varied for both fixed-interval and fixed-ratio schedules. In the second experiment, relative reinforcement rate was varied. And in a third experiment, the duration of an intertrial interval separating choices was varied. The results for 11 pigeons across all three experiments indicate that there were often large deviations between relative response rates and relative reinforcement rates. Overall performance measures were characterized by a great deal of variability across conditions. More detailed measures of choice across the schedule requirement were also quite variable across conditions. In spite of this variability, performance was consistent across conditions in its efficiency of producing food. The absence of matching of behavior allocation to reinforcement rate indicates an important difference between the present procedures and other choice procedures; that difference raises questions about the specific conditions that lead to matching as an outcome. PMID:16812452

Practical issues in quantum-key-distribution postprocessing

NASA Astrophysics Data System (ADS)

Fung, Chi-Hang Fred; Ma, Xiongfeng; Chau, H. F.

2010-01-01

Quantum key distribution (QKD) is a secure key generation method between two distant parties by wisely exploiting properties of quantum mechanics. In QKD, experimental measurement outcomes on quantum states are transformed by the two parties to a secret key. This transformation is composed of many logical steps (as guided by security proofs), which together will ultimately determine the length of the final secret key and its security. We detail the procedure for performing such classical postprocessing taking into account practical concerns (including the finite-size effect and authentication and encryption for classical communications). This procedure is directly applicable to realistic QKD experiments and thus serves as a recipe that specifies what postprocessing operations are needed and what the security level is for certain lengths of the keys. Our result is applicable to the BB84 protocol with a single or entangled photon source.

Benchmarking can add up for healthcare accounting.

PubMed

Czarnecki, M T

1994-09-01

In 1993, a healthcare accounting and finance benchmarking survey of hospital and nonhospital organizations gathered statistics about key common performance areas. A low response did not allow for statistically significant findings, but the survey identified performance measures that can be used in healthcare financial management settings. This article explains the benchmarking process and examines some of the 1993 study's findings.

Measuring Performance Excellence: Key Performance Indicators for Institutions Accepted into the Academic Quality Improvement Program (AQIP)

ERIC Educational Resources Information Center

Ballard, Paul J.

2013-01-01

Given growing interest in accountability and outcomes, the North Central Association's Higher Learning Commission developed a new path for accreditation, the Academic Quality Improvement Program (AQIP). The goal is to infuse continuous improvement and quality in the culture of higher education, and to blend traditional accreditation with the…

Australia's Vocational Education & Training System. Annual National Report. Volume 3: Vocational Education & Training Performance.

ERIC Educational Resources Information Center

Australian National Training Authority, Brisbane.

The state of vocational education and training (VET) in Australia in 1997 was evaluated by collecting data on the following key performance measures: participation and achievement in VET; employer views on VET; student outcomes from VET; VET's benefits for particular client groups (females, people from rural and remote areas, indigenous…

Determinants of Educational Achievement in Morocco: A Micro-Econometric Analysis Applied to the TIMSS Study

ERIC Educational Resources Information Center

Ibourk, Aomar

2013-01-01

Based on data from international surveys measuring learning (TIMSS), this article focuses on the analysis of the academic performance Moroccan students. The results of the econometric model show that the students' characteristics, their family environment and school context are key determinants of these performances. The study also shows that the…

Results of Statewide TerraNova Testing, Fall 1998.

ERIC Educational Resources Information Center

La Marca, Paul M.

This summary provides key findings about state, district, and school level performance on the TerraNova examinations (CTB/McGraw Hill) in Nevada in 1998-1999. The TerraNova tests are used to assess students in grades 4, 8, and 10 as stipulated by Nevada law. Within this summary, a description of performance as measured by national percentile…

Disease management as a performance improvement strategy.

PubMed

McClatchey, S

2001-11-01

Disease management is a strategy of organizing care and services for a patient population across the continuum. It is characterized by a population database, interdisciplinary and interagency collaboration, and evidence-based clinical information. The effectiveness of a disease management program has been measured by a combination of clinical, financial, and quality of life outcomes. In early 1997, driven by a strategic planning process that established three Centers of Excellence (COE), we implemented disease management as the foundation for a new approach to performance improvement utilizing five key strategies. The five implementation strategies are outlined, in addition to a review of the key elements in outcome achievement.

Quantum network with trusted and untrusted relays

NASA Astrophysics Data System (ADS)

Ma, Xiongfeng; Annabestani, Razieh; Fung, Chi-Hang Fred; Lo, Hoi-Kwong; Lütkenhaus, Norbert; PitkäNen, David; Razavi, Mohsen

2012-02-01

Quantum key distribution offers two distant users to establish a random secure key by exploiting properties of quantum mechanics, whose security has proven in theory. In practice, many lab and field demonstrations have been performed in the last 20 years. Nowadays, quantum network with quantum key distribution systems are tested around the world, such as in China, Europe, Japan and US. In this talk, I will give a brief introduction of recent development for quantum network. For the untrusted relay part, I will introduce the measurement-device-independent quantum key distribution scheme and a quantum relay with linear optics. The security of such scheme is proven without assumptions on the detection devices, where most of quantum hacking strategies are launched. This scheme can be realized with current technology. For the trusted relay part, I will introduce so-called delayed privacy amplification, with which no error correction and privacy amplification is necessarily to be performed between users and the relay. In this way, classical communications and computational power requirement on the relay site will be reduced.

Factors influencing hand/eye synchronicity in the computer age.

PubMed

Grant, A H

1992-09-01

In using a computer, the relation of vision to hand/finger actuated keyboard usage in performing fine motor-coordinated functions is influenced by the physical location, size, and collective placement of the keys. Traditional nonprehensile flat/rectangular keyboard applications usually require a high and nearly constant level of visual attention. Biometrically shaped keyboards would allow for prehensile hand-posturing, thus affording better tactile familiarity with the keys, requiring less intense and less constant level of visual attention to the task, and providing a greater measure of freedom from having to visualize the key(s). Workpace and related physiological changes, aging, onset of monocularization (intermittent lapsing of binocularity for near vision) that accompanies presbyopia, tool colors, and background contrast are factors affecting constancy of visual attention to task performance. Capitas extension, excessive excyclotorsion, and repetitive strain injuries (such as carpal tunnel syndrome) are common and debilitating concomitants to computer usage. These problems can be remedied by improved keyboard design. The salutary role of mnemonics in minimizing visual dependency is discussed.

The Search is on for Coherent Performance Measurement in Healthcare Organizations. Has Quebec Reached a Crossroads?

PubMed

Fache, Philippe; Sicotte, Claude; Minvielle, Étienne

2016-05-01

This research looks back at a 10-year period (2004-2014) to understand the development and outlook for healthcare organization performance measurement in the Quebec healthcare system, in an attempt to objectivize relationships within the configuration of its principal institutional actors. This is a qualitative study combining the use of official publications and fieldwork based on 13 semi-directed interviews, conducted in 2014, with informers in key performance measurement positions within the Quebec healthcare system. Performance measurement has generated tensions, both internally between different branches of the Department of Health and externally against a strong coalition of external institutional actors, which were defending a shared homogeneous vision of performance. Four major types of political power plays, owing to the power struggles around performance models and indicators, converged around the same implicit issue of the need to attain greater legitimacy in order to impose an authoritative frame of reference. Copyright © 2016 Longwoods Publishing.

Initial Performance of the Attitude Control and Aspect Determination Subsystems on the Chandra Observatory

NASA Technical Reports Server (NTRS)

Cameron, R.; Aldcroft, T.; Podgorski, W. A.; Freeman, M. D.

2000-01-01

The aspect determination system of the Chandra X-ray Observatory plays a key role in realizing the full potential of Chandra's X-ray optics and detectors. We review the performance of the spacecraft hardware components and sub-systems, which provide information for both real time control of the attitude and attitude stability of the Chandra Observatory and also for more accurate post-facto attitude reconstruction. These flight components are comprised of the aspect camera (star tracker) and inertial reference units (gyros), plus the fiducial lights and fiducial transfer optics which provide an alignment null reference system for the science instruments and X-ray optics, together with associated thermal and structural components. Key performance measures will be presented for aspect camera focal plane data, gyro performance both during stable pointing and during maneuvers, alignment stability and mechanism repeatability.

FMCSA safety program effectiveness measurement : Roadside Intervention Effectiveness Model FY 2012, [analysis brief].

DOT National Transportation Integrated Search

2016-02-01

Roadside Inspection and Traffic Enforcement are two of : the Federal Motor Carrier Safety Administrations : (FMCSAs) key safety programs. The Roadside : Inspection Program consists of roadside inspections : performed by qualified safety inspect...

FMCSA safety program effectiveness measurement : roadside intervention effectiveness model FY 2011 : [analysis brief].

DOT National Transportation Integrated Search

2015-06-01

Roadside Inspection and Traffic Enforcement are two of the Federal Motor Carrier Safety Administrations (FMCSAs) key safety programs. The Roadside Inspection program consists of roadside inspections performed by qualified safety inspectors. The...

Testing Math or Testing Language? The Construct Validity of the KeyMath-Revised for Children With Intellectual Disability and Language Difficulties.

PubMed

Rhodes, Katherine T; Branum-Martin, Lee; Morris, Robin D; Romski, MaryAnn; Sevcik, Rose A

2015-11-01

Although it is often assumed that mathematics ability alone predicts mathematics test performance, linguistic demands may also predict achievement. This study examined the role of language in mathematics assessment performance for children with intellectual disability (ID) at less severe levels, on the KeyMath-Revised Inventory (KM-R) with a sample of 264 children, in grades 2-5. Using confirmatory factor analysis, the hypothesis that the KM-R would demonstrate discriminant validity with measures of language abilities in a two-factor model was compared to two plausible alternative models. Results indicated that KM-R did not have discriminant validity with measures of children's language abilities and was a multidimensional test of both mathematics and language abilities for this population of test users. Implications are considered for test development, interpretation, and intervention.

Realizing the measure-device-independent quantum-key-distribution with passive heralded-single photon sources

PubMed Central

Wang, Qin; Zhou, Xing-Yu; Guo, Guang-Can

2016-01-01

In this paper, we put forward a new approach towards realizing measurement-device-independent quantum key distribution with passive heralded single-photon sources. In this approach, both Alice and Bob prepare the parametric down-conversion source, where the heralding photons are labeled according to different types of clicks from the local detectors, and the heralded ones can correspondingly be marked with different tags at the receiver’s side. Then one can obtain four sets of data through using only one-intensity of pump light by observing different kinds of clicks of local detectors. By employing the newest formulae to do parameter estimation, we could achieve very precise prediction for the two-single-photon pulse contribution. Furthermore, by carrying out corresponding numerical simulations, we compare the new method with other practical schemes of measurement-device-independent quantum key distribution. We demonstrate that our new proposed passive scheme can exhibit remarkable improvement over the conventional three-intensity decoy-state measurement-device-independent quantum key distribution with either heralded single-photon sources or weak coherent sources. Besides, it does not need intensity modulation and can thus diminish source-error defects existing in several other active decoy-state methods. Therefore, if taking intensity modulating errors into account, our new method will show even more brilliant performance. PMID:27759085

Optical image cryptosystem using chaotic phase-amplitude masks encoding and least-data-driven decryption by compressive sensing

NASA Astrophysics Data System (ADS)

Lang, Jun; Zhang, Jing

2015-03-01

In our proposed optical image cryptosystem, two pairs of phase-amplitude masks are generated from the chaotic web map for image encryption in the 4f double random phase-amplitude encoding (DRPAE) system. Instead of transmitting the real keys and the enormous masks codes, only a few observed measurements intermittently chosen from the masks are delivered. Based on compressive sensing paradigm, we suitably refine the series expansions of web map equations to better reconstruct the underlying system. The parameters of the chaotic equations can be successfully calculated from observed measurements and then can be used to regenerate the correct random phase-amplitude masks for decrypting the encoded information. Numerical simulations have been performed to verify the proposed optical image cryptosystem. This cryptosystem can provide a new key management and distribution method. It has the advantages of sufficiently low occupation of the transmitted key codes and security improvement of information transmission without sending the real keys.

Necessary detection efficiencies for secure quantum key distribution and bound randomness

NASA Astrophysics Data System (ADS)

Acín, Antonio; Cavalcanti, Daniel; Passaro, Elsa; Pironio, Stefano; Skrzypczyk, Paul

2016-01-01

In recent years, several hacking attacks have broken the security of quantum cryptography implementations by exploiting the presence of losses and the ability of the eavesdropper to tune detection efficiencies. We present a simple attack of this form that applies to any protocol in which the key is constructed from the results of untrusted measurements performed on particles coming from an insecure source or channel. Because of its generality, the attack applies to a large class of protocols, from standard prepare-and-measure to device-independent schemes. Our attack gives bounds on the critical detection efficiencies necessary for secure quantum key distribution, which show that the implementation of most partly device-independent solutions is, from the point of view of detection efficiency, almost as demanding as fully device-independent ones. We also show how our attack implies the existence of a form of bound randomness, namely nonlocal correlations in which a nonsignalling eavesdropper can find out a posteriori the result of any implemented measurement.

Experimental measurement-device-independent verification of quantum steering

NASA Astrophysics Data System (ADS)

Kocsis, Sacha; Hall, Michael J. W.; Bennet, Adam J.; Saunders, Dylan J.; Pryde, Geoff J.

2015-01-01

Bell non-locality between distant quantum systems—that is, joint correlations which violate a Bell inequality—can be verified without trusting the measurement devices used, nor those performing the measurements. This leads to unconditionally secure protocols for quantum information tasks such as cryptographic key distribution. However, complete verification of Bell non-locality requires high detection efficiencies, and is not robust to typical transmission losses over long distances. In contrast, quantum or Einstein-Podolsky-Rosen steering, a weaker form of quantum correlation, can be verified for arbitrarily low detection efficiencies and high losses. The cost is that current steering-verification protocols require complete trust in one of the measurement devices and its operator, allowing only one-sided secure key distribution. Here we present measurement-device-independent steering protocols that remove this need for trust, even when Bell non-locality is not present. We experimentally demonstrate this principle for singlet states and states that do not violate a Bell inequality.

Experimental measurement-device-independent verification of quantum steering.

PubMed

Kocsis, Sacha; Hall, Michael J W; Bennet, Adam J; Saunders, Dylan J; Pryde, Geoff J

2015-01-07

Bell non-locality between distant quantum systems--that is, joint correlations which violate a Bell inequality--can be verified without trusting the measurement devices used, nor those performing the measurements. This leads to unconditionally secure protocols for quantum information tasks such as cryptographic key distribution. However, complete verification of Bell non-locality requires high detection efficiencies, and is not robust to typical transmission losses over long distances. In contrast, quantum or Einstein-Podolsky-Rosen steering, a weaker form of quantum correlation, can be verified for arbitrarily low detection efficiencies and high losses. The cost is that current steering-verification protocols require complete trust in one of the measurement devices and its operator, allowing only one-sided secure key distribution. Here we present measurement-device-independent steering protocols that remove this need for trust, even when Bell non-locality is not present. We experimentally demonstrate this principle for singlet states and states that do not violate a Bell inequality.

Error behaviors associated with loss of competency in Alzheimer's disease.

PubMed

Marson, D C; Annis, S M; McInturff, B; Bartolucci, A; Harrell, L E

1999-12-10

To investigate qualitative behavioral changes associated with declining medical decision-making capacity (competency) in patients with AD. Qualitative measures can yield clinical information about functional changes in neurologic disease not available through quantitative measures. Normal older controls (n = 21) and patients with mild and moderate probable AD (n = 72) were compared using a standardized competency measure and neuropsychological measures. A system of 16 qualitative error scores representing conceptual domains of language, executive dysfunction, affective dysfunction, and compensatory responses was used to analyze errors produced on the competency measure. Patterns of errors were examined across groups. Relationships between error behaviors and competency performance were determined, and neurocognitive correlates of specific error behaviors were identified. AD patients demonstrated more miscomprehension, factual confusion, intrusions, incoherent responses, nonresponsive answers, loss of task, and delegation than controls. Errors in the executive domain (loss of task, nonresponsive answer, and loss of detachment) were key predictors of declining competency performance by AD patients. Neuropsychological analyses in the AD group generally confirmed the conceptual domain assignments of the qualitative scores. Loss of task, nonresponsive answers, and loss of detachment were key behavioral changes associated with declining competency of AD patients and with neurocognitive measures of executive dysfunction. These findings support the growing linkage between executive dysfunction and competency loss.

Paediatric International Nursing Study: using person-centred key performance indicators to benchmark children's services.

PubMed

McCance, Tanya; Wilson, Val; Kornman, Kelly

2016-07-01

The aim of the Paediatric International Nursing Study was to explore the utility of key performance indicators in developing person-centred practice across a range of services provided to sick children. The objective addressed in this paper was evaluating the use of these indicators to benchmark services internationally. This study builds on primary research, which produced indicators that were considered novel both in terms of their positive orientation and use in generating data that privileges the patient voice. This study extends this research through wider testing on an international platform within paediatrics. The overall methodological approach was a realistic evaluation used to evaluate the implementation of the key performance indicators, which combined an integrated development and evaluation methodology. The study involved children's wards/hospitals in Australia (six sites across three states) and Europe (seven sites across four countries). Qualitative and quantitative methods were used during the implementation process, however, this paper reports the quantitative data only, which used survey, observations and documentary review. The findings demonstrate the quality of care being delivered to children and their families across different international sites. The benchmarking does, however, highlight some differences between paediatric and general hospitals, and between the different key performance indicators across all the sites. The findings support the use of the key performance indicators as a novel method to benchmark services internationally. Whilst the data collected across 20 paediatric sites suggest services are more similar than different, benchmarking illuminates variations that encourage a critical dialogue about what works and why. The transferability of the key performance indicators and measurement framework across different settings has significant implications for practice. The findings offer an approach to benchmarking and celebrating the successes within practice, while learning from partners across the globe in further developing person-centred cultures. © 2016 John Wiley & Sons Ltd.

Quality, Satisfaction, and Financial Efficiency Associated With Elements of Primary Care Practice Transformation: Preliminary Findings

PubMed Central

Day, Julie; Scammon, Debra L.; Kim, Jaewhan; Sheets-Mervis, Annie; Day, Rachel; Tomoaia-Cotisel, Andrada; Waitzman, Norman J.; Magill, Michael K.

2013-01-01

PURPOSE We examined quality, satisfaction, financial, and productivity outcomes associated with implementation of Care by Design (CBD), the University of Utah’s version of the patient-centered medical home. METHODS We measured the implementation of individual elements of CBD using a combination of observation, chart audit, and collection of data from operational reports. We assessed correlations between level of implementation of each element and measures of quality, patient and clinician satisfaction, financial performance, and efficiency. RESULTS Team function elements had positive correlations (P ≤.05) with 6 quality measures, 4 patient satisfaction measure, and 3 clinician satisfaction measures. Continuity elements had positive correlations with 2 satisfaction measures and 1 quality measure. Clinician continuity was the key driver in the composite element of appropriate access. Unexpected findings included the negative correlation of use of templated questionnaires with 3 patient satisfaction measures. Trade-offs were observed for performance of blood draws in the examination room and the efficiency of visits, with some positive and some negative correlations depending on the outcome. CONCLUSIONS Elements related to care teams and continuity appear to be key elements of CBD as they influence all 3 CBD organizing principles: appropriate access, care teams, and planned care. These relationships, as well as unexpected, unfavorable ones, require further study and refined analyses to identify causal associations. PMID:23690386

Monitoring work zone safety and mobility impacts in Texas.

DOT National Transportation Integrated Search

2009-05-01

In this report, Texas Transportation Institute researchers identify key work zone safety and mobility : performance measures that the Texas Department of Transportation (TxDOT) should target as part of a work : zone monitoring program within a distri...

SmartWay strategic plan : 2007 annual report

DOT National Transportation Integrated Search

2007-12-01

This document presents an update to the ITS Strategic Plan, effective December 2007. The key plan elements are listed below: a definition of ITS, ITS user services relevant to the agency; performance measures to identify roadway segments and corridor...

FMCSA safety program effectiveness measurement : Roadside Intervention Effectiveness Model, fiscal year 2010 : [analysis brief].

DOT National Transportation Integrated Search

2014-11-01

Two of the Federal Motor Carrier Safety Administrations (FMCSAs) key safety programs are the Roadside Inspection and Traffic Enforcement programs. The Roadside Inspection program consists of roadside inspections performed by qualified safety in...

Unnatural selection: talent identification and development in sport.

PubMed

Abbott, Angela; Button, Chris; Pepping, Gert-Jan; Collins, Dave

2005-01-01

The early identification of talented individuals has become increasingly important across many performance domains. Current talent identification (TI) schemes in sport typically select on the basis of discrete, unidimensional measures at unstable periods in the athlete's development. In this article, the concept of talent is revised as a complex, dynamical system in which future behaviors emerge from an interaction of key performance determinants such as psychological behaviors, motor abilities, and physical characteristics. Key nonlinear dynamics concepts are related to TI approaches such as sensitivity to initial conditions, transitions, and exponential behavioral distributions. It is concluded that many TI models place an overemphasis on early identification rather than the development of potentially talented performers. A generic model of talent identification and development is proposed that addresses these issues and provides direction for future research.

Computer keyboard interaction as an indicator of early Parkinson’s disease

PubMed Central

Giancardo, L.; Sánchez-Ferro, A.; Arroyo-Gallego, T.; Butterworth, I.; Mendoza, C. S.; Montero, P.; Matarazzo, M.; Obeso, J. A.; Gray, M. L.; Estépar, R. San José

2016-01-01

Parkinson’s disease (PD) is a slowly progressing neurodegenerative disease with early manifestation of motor signs. Objective measurements of motor signs are of vital importance for diagnosing, monitoring and developing disease modifying therapies, particularly for the early stages of the disease when putative neuroprotective treatments could stop neurodegeneration. Current medical practice has limited tools to routinely monitor PD motor signs with enough frequency and without undue burden for patients and the healthcare system. In this paper, we present data indicating that the routine interaction with computer keyboards can be used to detect motor signs in the early stages of PD. We explore a solution that measures the key hold times (the time required to press and release a key) during the normal use of a computer without any change in hardware and converts it to a PD motor index. This is achieved by the automatic discovery of patterns in the time series of key hold times using an ensemble regression algorithm. This new approach discriminated early PD groups from controls with an AUC = 0.81 (n = 42/43; mean age = 59.0/60.1; women = 43%/60%;PD/controls). The performance was comparable or better than two other quantitative motor performance tests used clinically: alternating finger tapping (AUC = 0.75) and single key tapping (AUC = 0.61). PMID:27703257

Computer keyboard interaction as an indicator of early Parkinson’s disease

NASA Astrophysics Data System (ADS)

Giancardo, L.; Sánchez-Ferro, A.; Arroyo-Gallego, T.; Butterworth, I.; Mendoza, C. S.; Montero, P.; Matarazzo, M.; Obeso, J. A.; Gray, M. L.; Estépar, R. San José

2016-10-01

Parkinson’s disease (PD) is a slowly progressing neurodegenerative disease with early manifestation of motor signs. Objective measurements of motor signs are of vital importance for diagnosing, monitoring and developing disease modifying therapies, particularly for the early stages of the disease when putative neuroprotective treatments could stop neurodegeneration. Current medical practice has limited tools to routinely monitor PD motor signs with enough frequency and without undue burden for patients and the healthcare system. In this paper, we present data indicating that the routine interaction with computer keyboards can be used to detect motor signs in the early stages of PD. We explore a solution that measures the key hold times (the time required to press and release a key) during the normal use of a computer without any change in hardware and converts it to a PD motor index. This is achieved by the automatic discovery of patterns in the time series of key hold times using an ensemble regression algorithm. This new approach discriminated early PD groups from controls with an AUC = 0.81 (n = 42/43 mean age = 59.0/60.1 women = 43%/60%PD/controls). The performance was comparable or better than two other quantitative motor performance tests used clinically: alternating finger tapping (AUC = 0.75) and single key tapping (AUC = 0.61).

Computer keyboard interaction as an indicator of early Parkinson's disease.

PubMed

Giancardo, L; Sánchez-Ferro, A; Arroyo-Gallego, T; Butterworth, I; Mendoza, C S; Montero, P; Matarazzo, M; Obeso, J A; Gray, M L; Estépar, R San José

2016-10-05

Parkinson's disease (PD) is a slowly progressing neurodegenerative disease with early manifestation of motor signs. Objective measurements of motor signs are of vital importance for diagnosing, monitoring and developing disease modifying therapies, particularly for the early stages of the disease when putative neuroprotective treatments could stop neurodegeneration. Current medical practice has limited tools to routinely monitor PD motor signs with enough frequency and without undue burden for patients and the healthcare system. In this paper, we present data indicating that the routine interaction with computer keyboards can be used to detect motor signs in the early stages of PD. We explore a solution that measures the key hold times (the time required to press and release a key) during the normal use of a computer without any change in hardware and converts it to a PD motor index. This is achieved by the automatic discovery of patterns in the time series of key hold times using an ensemble regression algorithm. This new approach discriminated early PD groups from controls with an AUC = 0.81 (n = 42/43; mean age = 59.0/60.1; women = 43%/60%;PD/controls). The performance was comparable or better than two other quantitative motor performance tests used clinically: alternating finger tapping (AUC = 0.75) and single key tapping (AUC = 0.61).

On the vulnerability of basic quantum key distribution protocols and three protocols stable to attack with 'blinding' of avalanche photodetectors

DOE Office of Scientific and Technical Information (OSTI.GOV)

Molotkov, S. N., E-mail: sergei.molotkov@gmail.com

2012-05-15

The fundamental quantum mechanics prohibitions on the measurability of quantum states allow secure key distribution between spatially remote users to be performed. Experimental and commercial implementations of quantum cryptography systems, however, use components that exist at the current technology level, in particular, one-photon avalanche photodetectors. These detectors are subject to the blinding effect. It was shown that all the known basic quantum key distribution protocols and systems based on them are vulnerable to attacks with blinding of photodetectors. In such attacks, an eavesdropper knows all the key transferred, does not produce errors at the reception side, and remains undetected. Threemore » protocols of quantum key distribution stable toward such attacks are suggested. The security of keys and detection of eavesdropping attempts are guaranteed by the internal structure of protocols themselves rather than additional technical improvements.« less

Making Decisions about Adult Learners Based on Performances on Functional Competency Measures.

ERIC Educational Resources Information Center

Bunch, Michael B.

The validity and dependability of functional competency tests for adults are examined as they relate to the information needs of instructional decision makers. Test data from the Adult Performance Level (APL) Program (funded by the U.S. Office of Education at the University of Texas at Austin) is used to illustrate key points. In the discussion of…

A Financial Ratio Analysis of For-Profit and Non-Profit Rural Referral Centers

ERIC Educational Resources Information Center

McCue, Michael J.; Nayar, Preethy

2009-01-01

Context: National financial data show that rural referral center (RRC) hospitals have performed well financially. RRC hospitals' median cash flow margin ratio was 10.04% in 2002 and grew to 11.04% in 2004. Purpose: The aim of this study is to compare the ratio analysis of key operational and financial performance measures of for-profit RRCs to…

A Culture of Evidence: Postsecondary Assessment and Learning Outcomes. Recommendations to Policymakers and the Higher Education Community

ERIC Educational Resources Information Center

Dwyer, Carol A.; Millett, Catherine M.; Payne, David G.

2006-01-01

Developing a comprehensive strategy for postsecondary education that will meet the needs of America's diverse population and help ensure our ability to compete in the global economy is vital to the growth of our nation. Key to improving performance of our colleges and universities is measuring that performance. In this paper, the authors assert…

LABORATORY EVALUATION OF SIX NEW/MODIFIED PORTABLE X-RAY FLUORESCENCE SPECTROMETERS FOR THE MEASUREMENT OF LEAD IN CHARACTERIZED PAINT FILMS AND RESEARCH MATERIAL BOARDS (TECHNICAL REPORT)

EPA Science Inventory

A laboratory study was performed in 1994-1995 to identify and estimate the influence of key characteristics for evaluating the performance of portable X-ray fluorescence (XRF) spectrometers. Six new/modified spectrometers, including HNU SEFA-Pb, Metorex X-MET, Niton X-L, Radiat...

LABORATORY EVALUATION OF SIX NEW/MODIFIED PORTABLE X-RAY FLUORESCENCE SPECTROMETERS FOR THE MEASUREMENT OF LEAD IN CHARACTERIZED PAINT FILMS AND RESEARCH MATERIAL BOARDS (APPENDICES)

EPA Science Inventory

A laboratory study was performed in 1994-1995 to identify and estimate the influence of key characteristics for evaluating the performance of portable X-ray fluorescence (XRF) spectrometers. Six new/modified spectrometers, including HNU SEFA-Pb, Metorex X-MET, Niton X-L, Radiat...

JHR Project: a future Material Testing Reactor working as an International user Facility: The key-role of instrumentation in support to the development of modern experimental capacity

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bignan, G.; Gonnier, C.; Lyoussi, A.

2015-07-01

Research and development on fuel and material behaviour under irradiation is a key issue for sustainable nuclear energy in order to meet specific needs by keeping the best level of safety. These needs mainly deal with a constant improvement of performances and safety in order to optimize the fuel cycle and hence to reach nuclear energy sustainable objectives. A sustainable nuclear energy requires a high level of performances in order to meet specific needs such as: - Pursuing improvement of the performances and safety of present and coming water cooled reactor technologies. This will require a continuous R and Dmore » support following a long-term trend driven by the plant life management, safety demonstration, flexibility and economics improvement. Experimental irradiations of structure materials are necessary to anticipate these material behaviours and will contribute to their optimisation. - Upgrading continuously nuclear fuel technology in present and future nuclear power plants to achieve better performances and to optimise the fuel cycle keeping the best level of safety. Fuel evolution for generation II, III and III+ is a key stake requiring developments, qualification tests and safety experiments to ensure the competitiveness and safety: experimental tests exploring the full range of fuel behaviour determine fuel stability limits and safety margins, as a major input for the fuel reliability analysis. To perform such accurate and innovative progress and developments, specific and ad hoc instrumentation, irradiation devices, measurement methods are necessary to be set up inside or beside the material testing reactor (MTR) core. These experiments require beforehand in situ and on line sophisticated measurements to accurately determine different key parameters such as thermal and fast neutron fluxes and nuclear heating in order to precisely monitor and control the conducted assays. The new Material Testing Reactor JHR (Jules Horowitz Reactor) currently under construction at CEA Cadarache research centre in the south of France will represent a major Research Infrastructure for scientific studies regarding material and fuel behavior under irradiation. It will also be devoted to medical isotopes production. Hence JHR will offer a real opportunity to perform R and D programs regarding needs above and hence will crucially contribute to the selection, optimization and qualification of these innovative materials and fuels. The JHR reactor objectives, principles and main characteristics associated to specific experimental devices associated to measurement techniques and methodology, their performances, their limitations and field of applications will be presented and discussed. (authors)« less

Team Synergies in Sport: Theory and Measures

PubMed Central

Araújo, Duarte; Davids, Keith

2016-01-01

Individual players act as a coherent unit during team sports performance, forming a team synergy. A synergy is a collective property of a task-specific organization of individuals, such that the degrees of freedom of each individual in the system are coupled, enabling the degrees of freedom of different individuals to co-regulate each other. Here, we present an explanation for the emergence of such collective behaviors, indicating how these can be assessed and understood through the measurement of key system properties that exist, considering the contribution of each individual and beyond These include: to (i) dimensional compression, a process resulting in independent degree of freedom being coupled so that the synergy has fewer degrees of freedom than the set of components from which it arises; (ii) reciprocal compensation, if one element do not produce its function, other elements should display changes in their contributions so that task goals are still attained; (iii) interpersonal linkages, the specific contribution of each element to a group task; and (iv), degeneracy, structurally different components performing a similar, but not necessarily identical, function with respect to context. A primary goal of our analysis is to highlight the principles and tools required to understand coherent and dynamic team behaviors, as well as the performance conditions that make such team synergies possible, through perceptual attunement to shared affordances in individual performers. A key conclusion is that teams can be trained to perceive how to use and share specific affordances, explaining how individual’s behaviors self-organize into a group synergy. Ecological dynamics explanations of team behaviors can transit beyond mere ratification of sport performance, providing a comprehensive conceptual framework to guide the implementation of diagnostic measures by sport scientists, sport psychologists and performance analysts. Complex adaptive systems, synergies, group behaviors, team sport performance, ecological dynamics, performance analysis. PMID:27708609

Team Synergies in Sport: Theory and Measures.

PubMed

Araújo, Duarte; Davids, Keith

2016-01-01

Individual players act as a coherent unit during team sports performance, forming a team synergy. A synergy is a collective property of a task-specific organization of individuals, such that the degrees of freedom of each individual in the system are coupled, enabling the degrees of freedom of different individuals to co-regulate each other. Here, we present an explanation for the emergence of such collective behaviors, indicating how these can be assessed and understood through the measurement of key system properties that exist, considering the contribution of each individual and beyond These include: to (i) dimensional compression, a process resulting in independent degree of freedom being coupled so that the synergy has fewer degrees of freedom than the set of components from which it arises; (ii) reciprocal compensation, if one element do not produce its function, other elements should display changes in their contributions so that task goals are still attained; (iii) interpersonal linkages, the specific contribution of each element to a group task; and (iv), degeneracy, structurally different components performing a similar, but not necessarily identical, function with respect to context. A primary goal of our analysis is to highlight the principles and tools required to understand coherent and dynamic team behaviors, as well as the performance conditions that make such team synergies possible, through perceptual attunement to shared affordances in individual performers. A key conclusion is that teams can be trained to perceive how to use and share specific affordances, explaining how individual's behaviors self-organize into a group synergy. Ecological dynamics explanations of team behaviors can transit beyond mere ratification of sport performance, providing a comprehensive conceptual framework to guide the implementation of diagnostic measures by sport scientists, sport psychologists and performance analysts. Complex adaptive systems, synergies, group behaviors, team sport performance, ecological dynamics, performance analysis.

Final report of CCQM-K136 measurement of porosity properties (specific adsorption, BET specific surface area, specific pore volume and pore diameter) of nanoporous Al2O3

NASA Astrophysics Data System (ADS)

Sobina, E.; Zimathis, A.; Prinz, C.; Emmerling, F.; Unger, W.; de Santis Neves, R.; Galhardo, C. E.; De Robertis, E.; Wang, H.; Mizuno, K.; Kurokawa, A.

2016-01-01

CCQM key comparison K-136 Measurement of porosity properties (specific adsorption, BET specific surface area, specific pore volume and pore diameter) of nanoporous Al2O3 has been performed by the Surface Analysis Working Group (SAWG) of the Consultative Committee for Amount of Substance (CCQM). The objective of this key comparison is to compare the equivalency of the National Metrology Institutes (NMIs) and Designated Institutes (DIs) for the measurement of specific adsorption, BET specific surface area, specific pore volume and pore diameter) of nanoporous substances (sorbents, catalytic agents, cross-linkers, zeolites, etc) used in advanced technology. In this key comparison, a commercial sorbent (aluminum oxide) was supplied as a sample. Five NMIs participated in this key comparison. All participants used a gas adsorption method, here nitrogen adsorption at 77.3 K, for analysis according to the international standards ISO 15901-2 and 9277. In this key comparison, the degrees of equivalence uncertainties for specific adsorption, BET specific surface area, specific pore volume and pore diameter was established. Main text To reach the main text of this paper, click on Final Report. Note that this text is that which appears in Appendix B of the BIPM key comparison database kcdb.bipm.org/. The final report has been peer-reviewed and approved for publication by the CCQM, according to the provisions of the CIPM Mutual Recognition Arrangement (CIPM MRA).

Research Findings on a Virtual Training Center--Measuring Web Based Training as an Effective Project Management Facilitation Intervention.

ERIC Educational Resources Information Center

Hoyt, Brian; Stockman, Mark

This paper focuses on the design of an assessment plan that can accurately measure the impact of using World Wide Web-based deliveries to increase performance. Key trends in technology and training are reviewed, and effective assessment of online training deliveries is examined. The Virtual Business Training Center (VBTC) is an integrated business…

How Good Is Your School Library Resource Centre? An Introduction to Performance Measurement.

ERIC Educational Resources Information Center

Scott, Elspeth S.

Reflection and evaluation are key to improving the effectiveness of the school library resource center (LRC). The idea of measuring success may seem initially daunting, or even threatening, and be seen as yet another call on already limited time, but we should not be put off: much of the information required is already there, either explicit or…

Application of maximum likelihood methods to laser Thomson scattering measurements of low density plasmas

DOE Office of Scientific and Technical Information (OSTI.GOV)

Washeleski, Robert L.; Meyer, Edmond J. IV; King, Lyon B.

2013-10-15

Laser Thomson scattering (LTS) is an established plasma diagnostic technique that has seen recent application to low density plasmas. It is difficult to perform LTS measurements when the scattered signal is weak as a result of low electron number density, poor optical access to the plasma, or both. Photon counting methods are often implemented in order to perform measurements in these low signal conditions. However, photon counting measurements performed with photo-multiplier tubes are time consuming and multi-photon arrivals are incorrectly recorded. In order to overcome these shortcomings a new data analysis method based on maximum likelihood estimation was developed. Themore » key feature of this new data processing method is the inclusion of non-arrival events in determining the scattered Thomson signal. Maximum likelihood estimation and its application to Thomson scattering at low signal levels is presented and application of the new processing method to LTS measurements performed in the plume of a 2-kW Hall-effect thruster is discussed.« less

Application of maximum likelihood methods to laser Thomson scattering measurements of low density plasmas.

PubMed

Washeleski, Robert L; Meyer, Edmond J; King, Lyon B

2013-10-01

Laser Thomson scattering (LTS) is an established plasma diagnostic technique that has seen recent application to low density plasmas. It is difficult to perform LTS measurements when the scattered signal is weak as a result of low electron number density, poor optical access to the plasma, or both. Photon counting methods are often implemented in order to perform measurements in these low signal conditions. However, photon counting measurements performed with photo-multiplier tubes are time consuming and multi-photon arrivals are incorrectly recorded. In order to overcome these shortcomings a new data analysis method based on maximum likelihood estimation was developed. The key feature of this new data processing method is the inclusion of non-arrival events in determining the scattered Thomson signal. Maximum likelihood estimation and its application to Thomson scattering at low signal levels is presented and application of the new processing method to LTS measurements performed in the plume of a 2-kW Hall-effect thruster is discussed.

Analysis of digital communication signals and extraction of parameters

NASA Astrophysics Data System (ADS)

Al-Jowder, Anwar

1994-12-01

The signal classification performance of four types of electronics support measure (ESM) communications detection systems is compared from the standpoint of the unintended receiver (interceptor). Typical digital communication signals considered include binary phase shift keying (BPSK), quadrature phase shift keying (QPSK), frequency shift keying (FSK), and on-off keying (OOK). The analysis emphasizes the use of available signal processing software. Detection methods compared include broadband energy detection, FFT-based narrowband energy detection, and two correlation methods which employ the fast Fourier transform (FFT). The correlation methods utilize modified time-frequency distributions, where one of these is based on the Wigner-Ville distribution (WVD). Gaussian white noise is added to the signal to simulate various signal-to-noise ratios (SNR's).

Extended analysis of the Trojan-horse attack in quantum key distribution

NASA Astrophysics Data System (ADS)

Vinay, Scott E.; Kok, Pieter

2018-04-01

The discrete-variable quantum key distribution protocols based on the 1984 protocol of Bennett and Brassard (BB84) are known to be secure against an eavesdropper, Eve, intercepting the flying qubits and performing any quantum operation on them. However, these protocols may still be vulnerable to side-channel attacks. We investigate the Trojan-horse side-channel attack where Eve sends her own state into Alice's apparatus and measures the reflected state to estimate the key. We prove that the separable coherent state is optimal for Eve among the class of multimode Gaussian attack states, even in the presence of thermal noise. We then provide a bound on the secret key rate in the case where Eve may use any separable state.

Diversity and cultural competence training in health care organizations: hallmarks of success.

PubMed

Curtis, Ellen Foster; Dreachslin, Janice L; Sinioris, Marie

2007-01-01

The authors reviewed recent literature on diversity training interventions and identified effective practices for health care organizations. Self-reported satisfaction was especially likely to be found as a result of training, whereas attitude change measured by standardized instruments was mixed. Although those responsible for diversity training in the workplace agree that behavioral change is key, awareness building and associated attitude change remain the focus of most diversity training in the workplace. Consequently, the authors recommend a systems approach to diversity training interventions wherein training is a key component of a health care organization's strategic approach to organizational performance, and diversity training is linked to the organizations' strategic goals for improved quality of care. The systems approach requires these steps: determine diversity and cultural competence goals in the context of strategy, measure current performance against needs, design training to address the gap, implement the training, assess training effectiveness, and strive for continuous improvement. Higher level evaluations measuring whether employees have transferred learning from training to their jobs are paramount to the systems approach to diversity training interventions. Measuring other positive changes in a "return on investment" format can be used to convince stakeholders of training's value.

Developing information literacy: a key to evidence-based nursing.

PubMed

Shorten, A; Wallace, M C; Crookes, P A

2001-06-01

This report describes the evaluation of a curriculum-integrated programme designed to help students develop an awareness of the nursing literature, the skills to locate and retrieve it, and skills required in its evaluation; in other words'information literacy'. Positive changes in student performance on objective measures of information-literacy skills were revealed as well as a significant increase in the levels of confidence of the student in performing those skills. Students who had undertaken the information-literacy programme ('programme' students) performed better on a range of objective measures of information literacy, as well as reporting higher levels of confidence in these skills, than students who had not participated in the programme ('non-programme' students). Evaluation of this programme provides evidence of the potential usefulness of a curriculum-integrated approach for the development of information-literacy skills within nursing education. With these underlying skills, students will be better equipped to consolidate and extend their key information-literacy skills to include research appreciation and application. These are vital for effective lifelong learning and a prerequisite to evidence-based practice.

A rapid method to score stream reaches based on the overall performance of their main ecological functions.

PubMed

Rowe, David K; Parkyn, Stephanie; Quinn, John; Collier, Kevin; Hatton, Chris; Joy, Michael K; Maxted, John; Moore, Stephen

2009-06-01

A method was developed to score the ecological condition of first- to third-order stream reaches in the Auckland region of New Zealand based on the performance of their key ecological functions. Such a method is required by consultants and resource managers to quantify the reduction in ecological condition of a modified stream reach relative to its unmodified state. This is a fundamental precursor for the determination of fair environmental compensation for achieving no-net-loss in overall stream ecological value. Field testing and subsequent use of the method indicated that it provides a useful measure of ecological condition related to the performance of stream ecological functions. It is relatively simple to apply compared to a full ecological study, is quick to use, and allows identification of the degree of impairment of each of the key ecological functions. The scoring system was designed so that future improvements in the measurement of stream functions can be incorporated into it. Although the methodology was specifically designed for Auckland streams, the principles can be readily adapted to other regions and stream types.

A Hierarchical structure of key performance indicators for operation management and continuous improvement in production systems

PubMed Central

Kang, Ningxuan; Zhao, Cong; Li, Jingshan; Horst, John A.

2018-01-01

Key performance indicators (KPIs) are critical for manufacturing operation management and continuous improvement (CI). In modern manufacturing systems, KPIs are defined as a set of metrics to reflect operation performance, such as efficiency, throughput, availability, from productivity, quality and maintenance perspectives. Through continuous monitoring and measurement of KPIs, meaningful quantification and identification of different aspects of operation activities can be obtained, which enable and direct CI efforts. A set of 34 KPIs has been introduced in ISO 22400. However, the KPIs in a manufacturing system are not independent, and they may have intrinsic mutual relationships. The goal of this paper is to introduce a multi-level structure for identification and analysis of KPIs and their intrinsic relationships in production systems. Specifically, through such a hierarchical structure, we define and layer KPIs into levels of basic KPIs, comprehensive KPIs and their supporting metrics, and use it to investigate the relationships and dependencies between KPIs. Such a study can provide a useful tool for manufacturing engineers and managers to measure and utilize KPIs for CI. PMID:29398722

A Hierarchical structure of key performance indicators for operation management and continuous improvement in production systems.

PubMed

Kang, Ningxuan; Zhao, Cong; Li, Jingshan; Horst, John A

2016-01-01

Key performance indicators (KPIs) are critical for manufacturing operation management and continuous improvement (CI). In modern manufacturing systems, KPIs are defined as a set of metrics to reflect operation performance, such as efficiency, throughput, availability, from productivity, quality and maintenance perspectives. Through continuous monitoring and measurement of KPIs, meaningful quantification and identification of different aspects of operation activities can be obtained, which enable and direct CI efforts. A set of 34 KPIs has been introduced in ISO 22400. However, the KPIs in a manufacturing system are not independent, and they may have intrinsic mutual relationships. The goal of this paper is to introduce a multi-level structure for identification and analysis of KPIs and their intrinsic relationships in production systems. Specifically, through such a hierarchical structure, we define and layer KPIs into levels of basic KPIs, comprehensive KPIs and their supporting metrics, and use it to investigate the relationships and dependencies between KPIs. Such a study can provide a useful tool for manufacturing engineers and managers to measure and utilize KPIs for CI.

Challenges in Melt Furnace Tests

NASA Astrophysics Data System (ADS)

Belt, Cynthia

2014-09-01

Measurement is a critical part of running a cast house. Key performance indicators such as energy intensity, production (or melt rate), downtime (or OEE), and melt loss must all be understood and monitored on a weekly or monthly basis. Continuous process variables such as bath temperature, flue temperature, and furnace pressure should be used to control the furnace systems along with storing the values in databases for later analysis. While using measurement to track furnace performance over time is important, there is also a time and place for short-term tests.

Differential carrier phase recovery for QPSK optical coherent systems with integrated tunable lasers.

PubMed

Fatadin, Irshaad; Ives, David; Savory, Seb J

2013-04-22

The performance of a differential carrier phase recovery algorithm is investigated for the quadrature phase shift keying (QPSK) modulation format with an integrated tunable laser. The phase noise of the widely-tunable laser measured using a digital coherent receiver is shown to exhibit significant drift compared to a standard distributed feedback (DFB) laser due to enhanced low frequency noise component. The simulated performance of the differential algorithm is compared to the Viterbi-Viterbi phase estimation at different baud rates using the measured phase noise for the integrated tunable laser.

Building the foundation to generate a fundamental care standardised data set.

PubMed

Jeffs, Lianne; Muntlin Athlin, Asa; Needleman, Jack; Jackson, Debra; Kitson, Alison

2018-06-01

This paper provides an overview of the current state of performance measurement, key trends and a methodological approach to leverage in efforts to generate a standardised data set for fundamental care. Considerable transformation is occurring in health care globally with organisations focusing on achieving the quadruple aim of improving the experience of care, the health of populations, and the experience of providing care while reducing per capita costs of health care. In response, healthcare organisations are employing performance measurement and quality improvement methods to achieve the quadruple aim. Despite the plethora of measures available to health managers, there is no standardised data set and virtually no indicators reflecting how patients actually experience the delivery of fundamental care, such as nutrition, hydration, mobility, respect, education and psychosocial support. Given the linkages of fundamental care to safety and quality metrics, efforts to build the evidence base and knowledge that captures the impact of enacting fundamental care across the healthcare continuum and lifespan should include generating a routinely collected data set of relevant measures. This paper provides an overview of the current state of performance measurement, key trends and a methodological approach to leverage in efforts to generate a standardised data set for fundamental care. Standardised data sets enable comparability of data across clinical populations, healthcare sectors, geographic locations and time and provide data about care to support clinical, administrative and health policy decision-making. © 2018 John Wiley & Sons Ltd.

Full Core TREAT Kinetics Demonstration Using Rattlesnake/BISON Coupling Within MAMMOTH

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ortensi, Javier; DeHart, Mark D.; Gleicher, Frederick N.

2015-08-01

This report summarizes key aspects of research in evaluation of modeling needs for TREAT transient simulation. Using a measured TREAT critical measurement and a transient for a small, experimentally simplified core, Rattlesnake and MAMMOTH simulations are performed building from simple infinite media to a full core model. Cross sections processing methods are evaluated, various homogenization approaches are assessed and the neutronic behavior of the core studied to determine key modeling aspects. The simulation of the minimum critical core with the diffusion solver shows very good agreement with the reference Monte Carlo simulation and the experiment. The full core transient simulationmore » with thermal feedback shows a significantly lower power peak compared to the documented experimental measurement, which is not unexpected in the early stages of model development.« less

Building and measuring a high performance network architecture

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kramer, William T.C.; Toole, Timothy; Fisher, Chuck

2001-04-20

Once a year, the SC conferences present a unique opportunity to create and build one of the most complex and highest performance networks in the world. At SC2000, large-scale and complex local and wide area networking connections were demonstrated, including large-scale distributed applications running on different architectures. This project was designed to use the unique opportunity presented at SC2000 to create a testbed network environment and then use that network to demonstrate and evaluate high performance computational and communication applications. This testbed was designed to incorporate many interoperable systems and services and was designed for measurement from the very beginning.more » The end results were key insights into how to use novel, high performance networking technologies and to accumulate measurements that will give insights into the networks of the future.« less

Effect of cross-link density on carbon dioxide separation in polydimethylsiloxane-norbornene membranes

DOE PAGES

Hong, Tao; Niu, Zhenbin; Hu, Xunxiang; ...

2015-10-20

The development of high performance materials for CO 2 separation and capture will significantly contribute to a solution for climate change. In this work, (bicycloheptenyl) ethyl terminated polydimethylsiloxane (PDMSPNB) membranes with varied cross-link densities were synthesized via ring-opening metathesis polymerization. The developed polymer membranes show higher permeability and better selectivity than those of conventional cross-linked PDMS membrane. The achieved performance (CO 2 permeability ~ 6800 Barrer and CO 2/N 2 selectivity ~ 14) is very promising for practical applications. The key to achieving this high performance is the use of an in-situ cross-linking method of the difunctional PDMS macromonomers, whichmore » provides lightly cross-linked membranes. By combining positron annihilation lifetime spectroscopy, broadband dielectric spectroscopy and gas solubility measurements, we have elucidated the key parameters necessary for achieving their excellent performance.« less

Key performance indicators for Australian mental health court liaison services.

PubMed

Davidson, Fiona; Heffernan, Ed; Greenberg, David; Butler, Tony; Burgess, Philip

2017-12-01

The aim of this paper is to describe the development and technical specifications of a framework and national key performance indicators (KPIs) for Australian mental health Court Liaison Services (CLSs) by the National Mental Health Court Liaison Performance Working Group (Working Group). Representatives from each Australian State and Territory were invited to form a Working Group. Through a series of national workshops and meetings, a framework and set of performance indicators were developed using a review of literature and expert opinion. A total of six KPIs for CLSs have been identified and a set of technical specifications have been formed. This paper describes the process and outcomes of a national collaboration to develop a framework and KPIs. The measures have been developed to support future benchmarking activities and to assist services to identify best practice in this area of mental health service delivery.

Six steps to an effective denials management program.

PubMed

Robertson, Brian; Doré, Alexander

2005-09-01

The following six steps can help you manage denials management issues in your organization: Create standard definitions of denial types. Establish a denial hierarchy. Establish a centralized denial database. Develop key performance indicators. Build responsibility matrices. Measure, monitor, and take action.

Proof-of-principle experiment of measurement-device-independent quantum key distribution with vector vortex beams

NASA Astrophysics Data System (ADS)

Dong, Chen; Zhao, Shang-Hong; Li, Wei; Yang, Jian

2018-03-01

In this paper, by combining measurement-device-independent quantum key distribution (MDI-QKD) scheme with entangled photon sources, we present a modified MDI-QKD scheme with pairs of vector vortex(VV) beams, which shows a structure of hybrid entangled entanglement corresponding to intrasystem entanglement and intersystem entanglement. The former entanglement, which is entangled between polarization and orbit angular momentum within each VV beam, is adopted to overcome the polarization misalignment associated with random rotations in quantum key distribution. The latter entanglement, which is entangled between the two VV beams, is used to perform entangled-based MDI-QKD protocol with pair of VV beams to inherit the merit of long distance. The numerical simulations show that our modified scheme can tolerate 97dB with practical detectors. Furthermore, our modified protocol only needs to insert q-plates in practical experiment.

What does a Performance Measurement System Tell Us about the National Comprehensive Cancer Control Program?

PubMed Central

Townsend, Julie S.; Moore, Angela R.; Mulder, Tiffani N.; Boyd, Mary

2015-01-01

Context The National Comprehensive Cancer Control Program (NCCCP) performance measurement system seeks to understand both the processes that funded programs undertake with their respective coalitions to implement the objectives of their cancer plans and outcomes of those efforts. Objective To identify areas of achievement and technical assistance needs of NCCCP awardees. Design Program performance was assessed through surveys completed by program directors on performance indicators in 2009 and 2010 and queries from a web-based management information system in 2011 and 2012. Setting Programs funded by CDC’s NCCCP. Participants 69 programs. Main Outcome Measure(s) The key performance measures assessed were: inclusion of diverse partners and key sectors in cancer coalitions; partners’ involvement in activities; receiving in-kind resources from partners; using evidence-based interventions and data for setting priorities; conducting program evaluation; using community- or organization-level strategies to address cancer control efforts; and demonstrating progress toward achieving health outcomes. Results Most programs reported having active coalitions that represent diverse organizational sectors. Nearly all programs routinely assess the burden of cancer. In-kind resources to implement activities peaked at $64,716 in the second year of a five year funding cycle, and declined in subsequent project years. By year 3, over 70% of programs reported having an evaluation plan. While programs reported that nearly two-thirds of their interventions were evidence-based, some programs implemented non-evidence-based interventions. A majority of programs successfully used at least one community- or organization-level change strategy. However, many programs did not incorporate objectives linked to health outcomes as they reported progress in implementing interventions. Conclusions: While NCCCP programs were strong at building and maintaining infrastructure, some programs may need additional technical assistance to increase the adoption of evidence-based interventions, develop solid and responsive evaluation plans, and better link efforts to population-based measures that demonstrate impact toward reducing the burden of cancer. PMID:25136936

Trustworthiness of detectors in quantum key distribution with untrusted detectors

DOE PAGES

Qi, Bing

2015-02-25

Measurement-device-independent quantum key distribution (MDI-QKD) protocol has been demonstrated as a viable solution to detector side-channel attacks. One of the main advantages of MDI-QKD is that the security can be proved without making any assumptions about how the measurement device works. The price to pay is the relatively low secure key rate comparing with conventional quantum key distribution (QKD), such as the decoy-state BB84 protocol. Recently a new QKD protocol, aiming at bridging the strong security of MDI-QKD with the high e ciency of conventional QKD, has been proposed. In this protocol, the legitimate receiver employs a trusted linear opticsmore » network to encode information on photons received from an insecure quantum channel, and then performs a Bell state measurement (BSM) using untrusted detectors. One crucial assumption made in most of these studies is that the untrusted BSM located inside the receiver's laboratory cannot send any unwanted information to the outside. Here in this paper, we show that if the BSM is completely untrusted, a simple scheme would allow the BSM to send information to the outside. Combined with Trojan horse attacks, this scheme could allow Eve to gain information of the quantum key without being detected. Ultimately, to prevent the above attack, either countermeasures to Trojan horse attacks or some trustworthiness to the "untrusted" BSM device is required.« less

Final report on key comparison COOMET.QM-K36 (Project COOMET 540/UA/11) 'Electrolytic Conductivity 0,5 S/m'

NASA Astrophysics Data System (ADS)

Gavrilkin, V.; Prokopenko, L.; Bakovec, N.; Zolotorevich, E.; Suvorov, V.; Ovchinnikov, Yu; Pilishvili, T.; Buleishvili, M.; Zhasanbaeva, B.; Aytzhatova, G.; Ticona, G.; Vyskocil, L.

2015-01-01

The COOMET.QM-K36 key comparison 'Electrolytic conductivity: 0.5 S/m' is a comparison in the field of electrolytic conductivity measurements conducted by COOMET and carried out in 2012. It used a solution of KCl in water and the results are connected to those of the CCQM key comparison CCQM-K36.a through common participation of VNIIFTRI (Russia), SMU (Slovakia) and Ukrmetrteststandart (Ukraine). The purpose of this key comparison was to establish the equivalence of measurements of electrolytic conductivity performed at the National Metrology Institutes of COOMET member states for the value of 0.5 S/m. The results can be used to support the CMCs claims over the range of 0.1 S/m to 1.3 S/m. Main text. To reach the main text of this paper, click on Final Report. Note that this text is that which appears in Appendix B of the BIPM key comparison database kcdb.bipm.org/. The final report has been peer-reviewed and approved for publication by CCQM, according to the provisions of the CIPM Mutual Recognition Arrangement (CIPM MRA).

Islamic value to the modification of BSC model (a case study in evaluating company performance)

NASA Astrophysics Data System (ADS)

Harwati; Permana, Y.

2017-12-01

Halal is the key word for the Muslim community in consuming goods or services. Providing halal products is the main focus for companies with the largest consumers from the Muslim community. Halal is not only from the ingredients but also from the process in its production. The purpose of this study is to design a model of performance measurement for a company in order to provide halal products. Balance Score Card (BSC) is used as a framework. BSC as a performance measurement system has advantages not only focus on financial aspect but also non finance. Islamic values are incorporated into four perspective of BSC. They are: Selection of sharia financial institutions in financial perspective, payment method by consumer in consumer perspective, number of product with halal certificate and menu clarify in internal business process perspective, then accuracy of payroll time in learning and growth perspective. The modified BSC model obtains 17 Key Performance Indicators (KPI). The model is applied in a culinary industry (restaurant). Structured questionnaires and scheduled interviews are used to collect the important data. The result show that these industry fail to meet 8 from total 17 KPI so performance achievement is only 70.81%, and only reach 22.58% in Islamic value aspect. This is recorded by the company as an input to improve their performance in order to compete in halal food business.

Development of a Mass Casualty Triage Performance Assessment Tool

DTIC Science & Technology

2015-02-01

mass casualty triage and interviews with members of the unit, the triage assessment development involved three steps: (1) identification of key...Unlimited c. THIS PAGE Unlimited Unlimited Unclassified 35 19b. TELEPHONE NUMBER (include area code ) i Technical...in this report was initiated by ARI-FHRU to develop a prototype measure of performance for one of the three collective tasks identified in the

National Sample Assessment Protocols

ERIC Educational Resources Information Center

Ministerial Council on Education, Employment, Training and Youth Affairs (NJ1), 2012

2012-01-01

These protocols represent a working guide for planning and implementing national sample assessments in connection with the national Key Performance Measures (KPMs). The protocols are intended for agencies involved in planning or conducting national sample assessments and personnel responsible for administering associated tenders or contracts,…

Factors Impacting Student Service Utilization at Ontario Colleges: Key Performance Indicators as a Measure of Success: A Niagara College View

ERIC Educational Resources Information Center

Veres, David

2015-01-01

Student success in Ontario College is significantly influenced by the utilization of student services. At Niagara College there has been a significant investment in student services as a strategy to support student success. Utilizing existing KPI data, this quantitative research project is aimed at measuring factors that influence both the use of…

Evaluation of Advanced Stirling Convertor Net Heat Input Correlation Methods Using a Thermal Standard

NASA Technical Reports Server (NTRS)

Briggs, Maxwell; Schifer, Nicholas

2011-01-01

Test hardware used to validate net heat prediction models. Problem: Net Heat Input cannot be measured directly during operation. Net heat input is a key parameter needed in prediction of efficiency for convertor performance. Efficiency = Electrical Power Output (Measured) divided by Net Heat Input (Calculated). Efficiency is used to compare convertor designs and trade technology advantages for mission planning.

Initial Performance of the Aspect System on the Chandra Observatory: Post-Facto Aspect Reconstruction

NASA Technical Reports Server (NTRS)

Aldcroft, T.; Karovska, M.; Cresitello-Dittmar, M.; Cameron, R.

2000-01-01

The aspect system of the Chandra Observatory plays a key role in realizing the full potential of Chandra's x-ray optics and detectors. To achieve the highest spatial and spectral resolution (for grating observations), an accurate post-facto time history of the spacecraft attitude and internal alignment is needed. The CXC has developed a suite of tools which process sensor data from the aspect camera assembly and gyroscopes, and produce the spacecraft aspect solution. In this poster, the design of the aspect pipeline software is briefly described, followed by details of aspect system performance during the first eight months of flight. The two key metrics of aspect performance are: image reconstruction accuracy, which measures the x-ray image blurring introduced by aspect; and celestial location, which is the accuracy of detected source positions in absolute sky coordinates.

Sustaining Reliability on Accountability Measures at The Johns Hopkins Hospital.

PubMed

Pronovost, Peter J; Holzmueller, Christine G; Callender, Tiffany; Demski, Renee; Winner, Laura; Day, Richard; Austin, J Matthew; Berenholtz, Sean M; Miller, Marlene R

2016-02-01

In 2012 Johns Hopkins Medicine leaders challenged their health system to reliably deliver best practice care linked to nationally vetted core measures and achieve The Joint Commission Top Performer on Key Quality Measures ®program recognition and the Delmarva Foundation award. Thus, the Armstrong Institute for Patient Safety and Quality implemented an initiative to ensure that ≥96% of patients received care linked to measures. Nine low-performing process measures were targeted for improvement-eight Joint Commission accountability measures and one Delmarva Foundation core measure. In the initial evaluation at The Johns Hopkins Hospital, all accountability measures for the Top Performer program reached the required ≥95% performance, gaining them recognition by The Joint Commission in 2013. Efforts were made to sustain performance of accountability measures at The Johns Hopkins Hospital. Improvements were sustained through 2014 using the following conceptual framework: declare and communicate goals, create an enabling infrastructure, engage clinicians and connect them in peer learning communities, report transparently, and create accountability systems. One part of the accountability system was for teams to create a sustainability plan, which they presented to senior leaders. To support sustained improvements, Armstrong Institute leaders added a project management office for all externally reported quality measures and concurrent reviewers to audit performance on care processes for certain measure sets. The Johns Hopkins Hospital sustained performance on all accountability measures, and now more than 96% of patients receive recommended care consistent with nationally vetted quality measures. The initiative methods enabled the transition of quality improvement from an isolated project to a way of leading an organization.

Six Key Principles for Music Assessment

ERIC Educational Resources Information Center

Hale, Connie L.; Green, Susan K.

2009-01-01

Evaluating students' performance and measuring growth are ongoing foundational activities in the educational process. This article evolved from conversations between the authors about essential information that preservice teachers need to be able to assess their students fairly and effectively. Although the authors' expertise is in different…

77 FR 24458 - Submission for OMB Review; Comment Request

Federal Register 2010, 2011, 2012, 2013, 2014

2012-04-24

... financial data for the manufacturing, mining, wholesale trade, retail trade, information, and professional... provides financial data essential to calculation of key U.S. Government measures of national economic performance. The importance of this data collection is reflected by the granting of specific authority to...

A Generic Framework of Performance Measurement in Networked Enterprises

NASA Astrophysics Data System (ADS)

Kim, Duk-Hyun; Kim, Cheolhan

Performance measurement (PM) is essential for managing networked enterprises (NEs) because it greatly affects the effectiveness of collaboration among members of NE.PM in NE requires somewhat different approaches from PM in a single enterprise because of heterogeneity, dynamism, and complexity of NE’s. This paper introduces a generic framework of PM in NE (we call it NEPM) based on the Balanced Scorecard (BSC) approach. In NEPM key performance indicators and cause-and-effect relationships among them are defined in a generic strategy map. NEPM could be applied to various types of NEs after specializing KPIs and relationships among them. Effectiveness of NEPM is shown through a case study of some Korean NEs.

An analysis of image storage systems for scalable training of deep neural networks

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lim, Seung-Hwan; Young, Steven R; Patton, Robert M

This study presents a principled empirical evaluation of image storage systems for training deep neural networks. We employ the Caffe deep learning framework to train neural network models for three different data sets, MNIST, CIFAR-10, and ImageNet. While training the models, we evaluate five different options to retrieve training image data: (1) PNG-formatted image files on local file system; (2) pushing pixel arrays from image files into a single HDF5 file on local file system; (3) in-memory arrays to hold the pixel arrays in Python and C++; (4) loading the training data into LevelDB, a log-structured merge tree based key-valuemore » storage; and (5) loading the training data into LMDB, a B+tree based key-value storage. The experimental results quantitatively highlight the disadvantage of using normal image files on local file systems to train deep neural networks and demonstrate reliable performance with key-value storage based storage systems. When training a model on the ImageNet dataset, the image file option was more than 17 times slower than the key-value storage option. Along with measurements on training time, this study provides in-depth analysis on the cause of performance advantages/disadvantages of each back-end to train deep neural networks. We envision the provided measurements and analysis will shed light on the optimal way to architect systems for training neural networks in a scalable manner.« less

Exploring the effect of at-risk case management compensation on hospital pay-for-performance outcomes: tools for change.

PubMed

Granata, Randy L; Hamilton, Karen

2015-01-01

Acute care nurse case managers are charged with compliance oversight, managing throughput, and ensuring safe care transitions. Leveraging the roles of nurse case managers and social workers during care transitions translates into improved fiscal performance under the Affordable Care Act. This article aims to equip leaders in the field of case management with tools to facilitate the alignment of case management systems with hospital pay-for-performance measures. A quality improvement project was implemented at a hospital in south Alabama to examine the question: for acute care case managers, what is the effect of key performance indictors using an at-risk compensation model in comparison to past nonincentive models on hospital readmissions, lengths of stay, and patient satisfaction surrounding the discharge process. Inpatient acute care hospital. The implementation of an at-risk compensation model using key performance indicators, Lean Six Sigma methodology, and Creative Health Care Management's Relationship-Based Care framework demonstrated reduced length of stay, hospital readmissions, and improved patient experiences. Regulatory changes and new models of reimbursement in the acute care environment have created the perfect storm for case management leaders. Hospital fiscal performance is dependent on effective case management processes and the ability to optimize scarce resources. The quality improvement project aimed to further align case management systems and structures with hospital pay-for-performance measures. Tools for change were presented to assist leaders with the change acceleration process.

The OCO-3 Mission: Science Objectives and Instrument Performance

NASA Astrophysics Data System (ADS)

Eldering, A.; Basilio, R. R.; Bennett, M. W.

2017-12-01

The Orbiting Carbon Observatory 3 (OCO-3) will continue global CO2 and solar-induced chlorophyll fluorescence (SIF) using the flight spare instrument from OCO-2. The instrument is currently being tested, and will be packaged for installation on the International Space Station (ISS) (launch readiness in early 2018.) This talk will focus on the science objectives, updated simulations of the science data products, and the outcome of recent instrument performance tests. The low-inclination ISS orbit lets OCO-3 sample the tropics and sub-tropics across the full range of daylight hours with dense observations at northern and southern mid-latitudes (+/- 52º). The combination of these dense CO2 and SIF measurements provides continuity of data for global flux estimates as well as a unique opportunity to address key deficiencies in our understanding of the global carbon cycle. The instrument utilizes an agile, 2-axis pointing mechanism (PMA), providing the capability to look towards the bright reflection from the ocean and validation targets. The PMA also allows for a snapshot mapping mode to collect dense datasets over 100km by 100km areas. Measurements over urban centers could aid in making estimates of fossil fuel CO2 emissions. Similarly, the snapshot mapping mode can be used to sample regions of interest for the terrestrial carbon cycle. In addition, there is potential to utilize data from ISS instruments ECOSTRESS (ECOsystem Spaceborne Thermal Radiometer Experiment on Space Station) and GEDI (Global Ecosystem Dynamics Investigation), which measure other key variables of the control of carbon uptake by plants, to complement OCO-3 data in science analysis. In 2017, the OCO-2 instrument was transformed into the ISS-ready OCO-3 payload. The transformed instrument was thoroughly tested and characterized. Key characteristics, such as instrument ILS, spectral resolution, and radiometric performance will be described. Analysis of direct sun measurements taken during testing will also be discussed.

Applying the balanced scorecard to local public health performance measurement: deliberations and decisions

PubMed Central

Weir, Erica; d'Entremont, Nadine; Stalker, Shelley; Kurji, Karim; Robinson, Victoria

2009-01-01

Background All aspects of the heath care sector are being asked to account for their performance. This poses unique challenges for local public health units with their traditional focus on population health and their emphasis on disease prevention, health promotion and protection. Reliance on measures of health status provides an imprecise and partial picture of the performance of a health unit. In 2004 the provincial Institute for Clinical Evaluative Sciences based in Ontario, Canada introduced a public-health specific balanced scorecard framework. We present the conceptual deliberations and decisions undertaken by a health unit while adopting the framework. Discussion Posing, pondering and answering key questions assisted in applying the framework and developing indicators. Questions such as: Who should be involved in developing performance indicators? What level of performance should be measured? Who is the primary intended audience? Where and how do we begin? What types of indicators should populate the health status and determinants quadrant? What types of indicators should populate the resources and services quadrant? What type of indicators should populate the community engagement quadrant? What types of indicators should populate the integration and responsiveness quadrants? Should we try to link the quadrants? What comparators do we use? How do we move from a baseline report card to a continuous quality improvement management tool? Summary An inclusive, participatory process was chosen for defining and creating indicators to populate the four quadrants. Examples of indicators that populate the four quadrants of the scorecard are presented and key decisions are highlighted that facilitated the process. PMID:19426508

Applying the balanced scorecard to local public health performance measurement: deliberations and decisions.

PubMed

Weir, Erica; d'Entremont, Nadine; Stalker, Shelley; Kurji, Karim; Robinson, Victoria

2009-05-08

All aspects of the heath care sector are being asked to account for their performance. This poses unique challenges for local public health units with their traditional focus on population health and their emphasis on disease prevention, health promotion and protection. Reliance on measures of health status provides an imprecise and partial picture of the performance of a health unit. In 2004 the provincial Institute for Clinical Evaluative Sciences based in Ontario, Canada introduced a public-health specific balanced scorecard framework. We present the conceptual deliberations and decisions undertaken by a health unit while adopting the framework. Posing, pondering and answering key questions assisted in applying the framework and developing indicators. Questions such as: Who should be involved in developing performance indicators? What level of performance should be measured? Who is the primary intended audience? Where and how do we begin? What types of indicators should populate the health status and determinants quadrant? What types of indicators should populate the resources and services quadrant? What type of indicators should populate the community engagement quadrant? What types of indicators should populate the integration and responsiveness quadrants? Should we try to link the quadrants? What comparators do we use? How do we move from a baseline report card to a continuous quality improvement management tool? An inclusive, participatory process was chosen for defining and creating indicators to populate the four quadrants. Examples of indicators that populate the four quadrants of the scorecard are presented and key decisions are highlighted that facilitated the process.

Examining the influence of family physician supply on district health system performance in South Africa: An ecological analysis of key health indicators.

PubMed

Von Pressentin, Klaus B; Mash, Bob J; Esterhuizen, Tonya M

2017-04-28

The supply of appropriate health workers is a key building block in the World Health Organization's model of effective health systems. Primary care teams are stronger if they contain doctors with postgraduate training in family medicine. The contribution of such family physicians to the performance of primary care systems has not been evaluated in the African context. Family physicians with postgraduate training entered the South African district health system (DHS) from 2011. This study aimed to evaluate the impact of family physicians within the DHS of South Africa. The objectives were to evaluate the impact of an increase in family physician supply in each district (number per 10 000 population) on key health indicators. All 52 South African health districts were included as units of analysis. An ecological study evaluated the correlations between the supply of family physicians and routinely collected data on district performance for two time periods: 2010/2011 and 2014/2015. Five years after the introduction of the new generation of family physicians, this study showed no demonstrable correlation between family physician supply and improved health indicators from the macro-perspective of the district. The lack of a measurable impact at the level of the district is most likely because of the very low supply of family physicians in the public sector. Studies which evaluate impact closer to the family physician's circle of control may be better positioned to demonstrate a measurable impact in the short term.

HVAC modifications and computerized energy analysis for the Operations Support Building at the Mars Deep Space Station at Goldstone

NASA Technical Reports Server (NTRS)

Halperin, A.; Stelzmuller, P.

1986-01-01

The key heating, ventilation, and air-conditioning (HVAC) modifications implemented at the Mars Deep Space Station's Operation Support Building at Jet Propulsion Laboratories (JPL) in order to reduce energy consumption and decrease operating costs are described. An energy analysis comparison between the computer simulated model for the building and the actual meter data was presented. The measurement performance data showed that the cumulative energy savings was about 21% for the period 1979 to 1981. The deviation from simulated data to measurement performance data was only about 3%.

Performance measures in the earth observations commercialization applications program

NASA Astrophysics Data System (ADS)

Macauley, Molly K.

1996-03-01

Performance measures in the Earth Observations Commercialization Application Program (EOCAP) are key to its success and include net profitability; enhancements to industry productivity through generic innovations in industry practices, standards, and protocols; and documented contributions to public policy governing the newly developing remote sensing industry. Because EOCAP requires company co-funding, both parties to the agreement (the government and the corporate partner) have incentives to pursue these goals. Further strengthening progress towards these goals are requirements for business plans in the company's EOCAP proposal, detailed scrutiny given these plans during proposal selection, and regularly documented progress reports during project implementation.

Proposed Performance Measures and Strategies for Implementation of the Fatigue Risk Management Guidelines for Emergency Medical Services.

PubMed

Martin-Gill, Christian; Higgins, J Stephen; Van Dongen, Hans P A; Buysse, Daniel J; Thackery, Ronald W; Kupas, Douglas F; Becker, David S; Dean, Bradley E; Lindbeck, George H; Guyette, Francis X; Penner, Josef H; Violanti, John M; Lang, Eddy S; Patterson, P Daniel

2018-02-15

Performance measures are a key component of implementation, dissemination, and evaluation of evidence-based guidelines (EBGs). We developed performance measures for Emergency Medical Services (EMS) stakeholders to enable the implementation of guidelines for fatigue risk management in the EMS setting. Panelists associated with the Fatigue in EMS Project, which was supported by the National Highway Traffic Safety Administration (NHTSA), used an iterative process to develop a draft set of performance measures linked to 5 recommendations for fatigue risk management in EMS. We used a cross-sectional survey design and the Content Validity Index (CVI) to quantify agreement among panelists on the wording and content of draft measures. An anonymous web-based tool was used to solicit the panelists' perceptions of clarity and relevance of draft measures. Panelists rated the clarity and relevance separately for each draft measure on a 4-point scale. CVI scores ≥0.78 for clarity and relevance were specified a priori to signify agreement and completion of measurement development. Panelists judged 5 performance measures for fatigue risk management as clear and relevant. These measures address use of fatigue and/or sleepiness survey instruments, optimal duration of shifts, access to caffeine as a fatigue countermeasure, use of napping during shift work, and the delivery of education and training on fatigue risk management for EMS personnel. Panelists complemented performance measures with suggestions for implementation by EMS agencies. Performance measures for fatigue risk management in the EMS setting will facilitate the implementation and evaluation of the EBG for Fatigue in EMS.

Music performance and the perception of key.

PubMed

Thompson, W F; Cuddy, L L

1997-02-01

The effect of music performance on perceived key movement was examined. Listeners judged key movement in sequences presented without performance expression (mechanical) in Experiment 1 and with performance expression in Experiment 2. Modulation distance varied. Judgments corresponded to predictions based on the cycle of fifths and toroidal models of key relatedness, with the highest correspondence for performed versions with the toroidal model. In Experiment 3, listeners compared mechanical sequences with either performed sequences or modifications of performed sequences. Modifications preserved expressive differences between chords, but not between voices. Predictions from Experiments 1 and 2 held only for performed sequences, suggesting that differences between voices are informative of key movement. Experiment 4 confirmed that modifications did not disrupt musicality. Analyses of performances further suggested a link between performance expression and key.

From Data to Bonuses: A Case Study of the Issues Related to Awarding Teachers Pay on the Basis of Their Students' Progress. Working Paper 2008-14

ERIC Educational Resources Information Center

McCaffrey, Daniel F.; Han, Bing; Lockwood, J. R.

2008-01-01

A key component to the new wave of performance-based pay initiatives is the use of student achievement data to evaluate teacher performance. As greater amounts of student achievement data are being collected, researchers have been developing and applying innovative statistical and econometric models to longitudinal data to develop measures of an…

The Value of Smarter Teachers: International Evidence on Teacher Cognitive Skills and Student Performance. Program on Education Policy and Governance Working Papers Series. PEPG 14-06

ERIC Educational Resources Information Center

Hanushek, Eric A.; Piopiunik, Marc; Wiederhold, Simon

2014-01-01

Differences in teacher quality are commonly cited as a key determinant of the huge international student performance gaps. However, convincing evidence on this relationship is still lacking, in part because it is unclear how to measure teacher quality consistently across countries. We use unique international assessment data to investigate the…

Improved performance of analog and digital acousto-optic modulation with feedback under profiled beam propagation for secure communication using chaos

NASA Astrophysics Data System (ADS)

Almehmadi, Fares S.; Chatterjee, Monish R.

2014-12-01

Using intensity feedback, the closed-loop behavior of an acousto-optic hybrid device under profiled beam propagation has been recently shown to exhibit wider chaotic bands potentially leading to an increase in both the dynamic range and sensitivity to key parameters that characterize the encryption. In this work, a detailed examination is carried out vis-à-vis the robustness of the encryption/decryption process relative to parameter mismatch for both analog and pulse code modulation signals, and bit error rate (BER) curves are used to examine the impact of additive white noise. The simulations with profiled input beams are shown to produce a stronger encryption key (i.e., much lower parametric tolerance thresholds) relative to simulations with uniform plane wave input beams. In each case, it is shown that the tolerance for key parameters drops by factors ranging from 10 to 20 times below those for uniform plane wave propagation. Results are shown to be at consistently lower tolerances for secure transmission of analog and digital signals using parameter tolerance measures, as well as BER performance measures for digital signals. These results hold out the promise for considerably greater information transmission security for such a system.

Security of quantum key distribution with multiphoton components

PubMed Central

Yin, Hua-Lei; Fu, Yao; Mao, Yingqiu; Chen, Zeng-Bing

2016-01-01

Most qubit-based quantum key distribution (QKD) protocols extract the secure key merely from single-photon component of the attenuated lasers. However, with the Scarani-Acin-Ribordy-Gisin 2004 (SARG04) QKD protocol, the unconditionally secure key can be extracted from the two-photon component by modifying the classical post-processing procedure in the BB84 protocol. Employing the merits of SARG04 QKD protocol and six-state preparation, one can extract secure key from the components of single photon up to four photons. In this paper, we provide the exact relations between the secure key rate and the bit error rate in a six-state SARG04 protocol with single-photon, two-photon, three-photon, and four-photon sources. By restricting the mutual information between the phase error and bit error, we obtain a higher secure bit error rate threshold of the multiphoton components than previous works. Besides, we compare the performances of the six-state SARG04 with other prepare-and-measure QKD protocols using decoy states. PMID:27383014

A more secure parallel keyed hash function based on chaotic neural network

NASA Astrophysics Data System (ADS)

Huang, Zhongquan

2011-08-01

Although various hash functions based on chaos or chaotic neural network were proposed, most of them can not work efficiently in parallel computing environment. Recently, an algorithm for parallel keyed hash function construction based on chaotic neural network was proposed [13]. However, there is a strict limitation in this scheme that its secret keys must be nonce numbers. In other words, if the keys are used more than once in this scheme, there will be some potential security flaw. In this paper, we analyze the cause of vulnerability of the original one in detail, and then propose the corresponding enhancement measures, which can remove the limitation on the secret keys. Theoretical analysis and computer simulation indicate that the modified hash function is more secure and practical than the original one. At the same time, it can keep the parallel merit and satisfy the other performance requirements of hash function, such as good statistical properties, high message and key sensitivity, and strong collision resistance, etc.

Initial empirical analysis of nuclear power plant organization and its effect on safety performance

DOE Office of Scientific and Technical Information (OSTI.GOV)

Olson, J.; McLaughlin, S.D.; Osborn, R.N.

This report contains an analysis of the relationship between selected aspects of organizational structure and the safety-related performance of nuclear power plants. The report starts by identifying and operationalizing certain key dimensions of organizational structure that may be expected to be related to plant safety performance. Next, indicators of plant safety performance are created by combining existing performance measures into more reliable indicators. Finally, the indicators of plant safety performance using correlational and discriminant analysis. The overall results show that plants with better developed coordination mechanisms, shorter vertical hierarchies, and a greater number of departments tend to perform more safely.

A Review and Annotated Bibliography of Training Performance Measurement and Assessment Literature

DTIC Science & Technology

1988-10-01

work envirorments and orgoIizational climate questomaires. Identifies empirical eaures of Army unit effectiveness . Key Points: Looks at inspection reparts, mission accompil lsl’nt results, eff iclwy measures etc. A-63 ...PROJECT TASK WORK UNIT TRADE/ARI), 12350 Research Parkway ELEMENT NO. NO. NO. ACCESSION NO. Orlando, FL 32826-3276 (continued) 6.3.7.43 A794 4.3.2 C.1 11... effectiveness . Researchers should investigate means for developing more empirical data, better analytic methods, and standardized measurement. Increased

Procurement performance measurement system in the health care industry.

PubMed

Kumar, Arun; Ozdamar, Linet; Ng, Chai Peng

2005-01-01

The rising operating cost of providing healthcare is of concern to health care providers. As such, measurement of procurement performance will enable competitive advantage and provide a framework for continuous improvement. The objective of this paper is to develop a procurement performance measurement system. The paper reviews the existing literature in procurement performance measurement to identify the key areas of purchasing performance. By studying the three components in the supply chain collectively with the resources, procedures and output, a model is been developed. Additionally, a balanced scorecard is proposed by establishing a set of generic measures and six perspectives. A case study conducted at the Singapore Hospital applies the conceptual model to describe the purchasing department and the activities within and outside the department. The results indicate that the material management department has already made a good start in measuring the procurement process through the implementation of the balanced scorecard. There are many data that are collected but not properly collated and utilized. Areas lacking measurement include cycle time of delivery, order processing time, effectiveness, efficiency and reliability. Though a lot of hard work was involved, the advantages of establishing a measurement system outweigh the costs and efforts involved in its implementation. Results of balanced scorecard measurements provide decision-makers with critical information on efficiency and effectiveness of the purchasing department's work. The measurement model developed could be used for any hospital procurement system.

Development of an automated analysis system for data from flow cytometric intracellular cytokine staining assays from clinical vaccine trials

PubMed Central

Shulman, Nick; Bellew, Matthew; Snelling, George; Carter, Donald; Huang, Yunda; Li, Hongli; Self, Steven G.; McElrath, M. Juliana; De Rosa, Stephen C.

2008-01-01

Background Intracellular cytokine staining (ICS) by multiparameter flow cytometry is one of the primary methods for determining T cell immunogenicity in HIV-1 clinical vaccine trials. Data analysis requires considerable expertise and time. The amount of data is quickly increasing as more and larger trials are performed, and thus there is a critical need for high throughput methods of data analysis. Methods A web based flow cytometric analysis system, LabKey Flow, was developed for analyses of data from standardized ICS assays. A gating template was created manually in commercially-available flow cytometric analysis software. Using this template, the system automatically compensated and analyzed all data sets. Quality control queries were designed to identify potentially incorrect sample collections. Results Comparison of the semi-automated analysis performed by LabKey Flow and the manual analysis performed using FlowJo software demonstrated excellent concordance (concordance correlation coefficient >0.990). Manual inspection of the analyses performed by LabKey Flow for 8-color ICS data files from several clinical vaccine trials indicates that template gates can appropriately be used for most data sets. Conclusions The semi-automated LabKey Flow analysis system can analyze accurately large ICS data files. Routine use of the system does not require specialized expertise. This high-throughput analysis will provide great utility for rapid evaluation of complex multiparameter flow cytometric measurements collected from large clinical trials. PMID:18615598

Defining and Measuring Cognitive-Entropy and Cognitive Self-Synchronization

DTIC Science & Technology

2011-06-01

16th ICCRTS: “Collective C2 in Multinational Civil-Military Operations” Defining and Measuring Cognitive-Entropy and Cognitive Self- Synchronization ...shared awareness and enabling self- synchronization across the range of participating entities (Alberts and Hayes 2009, pp.106). We consider the...aspect of self- synchronization (Alberts and Hayes, 2006) a key one in the context of modern operations and in performing C2 assessments. Based on (Manso

Inorganic Substrates and Encapsulation Layers for Transient Electronics

DTIC Science & Technology

2014-07-01

surface oxidation of the nitrides, the measurements were conducted shortly after oxide removal in buffered oxide etchant (BOE) 6:1 (Transene Company Inc...values for the time-dependent dissolution of thermally grown SiO2 (dry oxidation) in buffer solutions (black, pH 7.4; red, pH 8; blue, pH 10...22 5.1.3 Contractor will Identify and Measure Key Performance Characteristics of Candidate Metal Conductive Layers for

First measurements of the new ClO-mm-wave sounder at the Jungfraujoch Alpine Station

NASA Technical Reports Server (NTRS)

Gerber, Louis; Kaempfer, Niklaus

1994-01-01

In the last years much progress has been made in the field of the detection of stratospheric trace constituents. However, only few techniques are suitable to detect ClO, one of the key constituents in ozone depletion chemistry. One of these techniques is mm-wave radiometry. This work presents the first measurements performed by a new 204 GHz radiometer at the Jungfraujoch Alpine Station.

Continuous-variable measurement-device-independent quantum key distribution with photon subtraction

NASA Astrophysics Data System (ADS)

Ma, Hong-Xin; Huang, Peng; Bai, Dong-Yun; Wang, Shi-Yu; Bao, Wan-Su; Zeng, Gui-Hua

2018-04-01

It has been found that non-Gaussian operations can be applied to increase and distill entanglement between Gaussian entangled states. We show the successful use of the non-Gaussian operation, in particular, photon subtraction operation, on the continuous-variable measurement-device-independent quantum key distribution (CV-MDI-QKD) protocol. The proposed method can be implemented based on existing technologies. Security analysis shows that the photon subtraction operation can remarkably increase the maximal transmission distance of the CV-MDI-QKD protocol, which precisely make up for the shortcoming of the original CV-MDI-QKD protocol, and one-photon subtraction operation has the best performance. Moreover, the proposed protocol provides a feasible method for the experimental implementation of the CV-MDI-QKD protocol.

One-sided measurement-device-independent quantum key distribution

NASA Astrophysics Data System (ADS)

Cao, Wen-Fei; Zhen, Yi-Zheng; Zheng, Yu-Lin; Li, Li; Chen, Zeng-Bing; Liu, Nai-Le; Chen, Kai

2018-01-01

Measurement-device-independent quantum key distribution (MDI-QKD) protocol was proposed to remove all the detector side channel attacks, while its security relies on the trusted encoding systems. Here we propose a one-sided MDI-QKD (1SMDI-QKD) protocol, which enjoys detection loophole-free advantage, and at the same time weakens the state preparation assumption in MDI-QKD. The 1SMDI-QKD can be regarded as a modified MDI-QKD, in which Bob's encoding system is trusted, while Alice's is uncharacterized. For the practical implementation, we also provide a scheme by utilizing coherent light source with an analytical two decoy state estimation method. Simulation with realistic experimental parameters shows that the protocol has a promising performance, and thus can be applied to practical QKD applications.

Ultrasound Metrology in Mexico: a round robin test for medical diagnostics

NASA Astrophysics Data System (ADS)

Amezola Luna, R.; López Sánchez, A. L.; Elías Juárez, A. A.

2011-02-01

This paper presents preliminary statistical results from an on-going imaging medical ultrasound study, of particular relevance for gynecology and obstetrics areas. Its scope is twofold, firstly to compile the medical ultrasound infrastructure available in cities of Queretaro-Mexico, and second to promote the use of traceable measurement standards as a key aspect to assure quality of ultrasound examinations performed by medical specialists. The experimental methodology is based on a round robin test using an ultrasound phantom for medical imaging. The physician, using its own ultrasound machine, couplant and facilities, measures the size and depth of a set of pre-defined reflecting and absorbing targets of the reference phantom, which simulate human illnesses. Measurements performed give the medical specialist an objective feedback regarding some performance characteristics of their ultrasound examination systems, such as measurement system accuracy, dead zone, axial resolution, depth of penetration and anechoic targets detection. By the end of March 2010, 66 entities with medical ultrasound facilities, from both public and private institutions, have performed measurements. A network of medical ultrasound calibration laboratories in Mexico, with traceability to The International System of Units via national measurement standards, may indeed contribute to reduce measurement deviations and thus attain better diagnostics.

Occurrence of 'super soft' wheat kernel texture in hexaploid and tetraploid wheats

USDA-ARS?s Scientific Manuscript database

Wheat kernel texture is a key trait that governs milling performance, flour starch damage, flour particle size, flour hydration properties, and baking quality. Kernel texture is commonly measured using the Perten Single Kernel Characterization System (SKCS). The SKCS returns texture values (Hardness...

Australian Vocational Education and Training Statistics: VET in Schools, 2008

ERIC Educational Resources Information Center

National Centre for Vocational Education Research (NCVER), 2010

2010-01-01

This report presents information about senior secondary school students undertaking vocational education and training (VET) through the program known as "VET in Schools" during 2008. It includes information on participation, students, courses and qualifications, and subjects. The information on key performance measures and program…

77 FR 2510 - Proposed Information Collection; Comment Request; Quarterly Financial Report

Federal Register 2010, 2011, 2012, 2013, 2014

2012-01-18

... scope of collection. The current collection includes the Manufacturing, Mining, Wholesale Trade, Retail... economic indicator that also provides financial data essential to the estimation of key Government measures of national economic performance. The importance of this data collection is reflected by the granting...

Framework for Assessing Environmental, Social, and Economic Sustainability of ICT Organizations

ERIC Educational Resources Information Center

Odeh, Khuloud

2013-01-01

Key challenges that confront the Information and Communication Technology (ICT) industry today in defining and achieving social, environmental, and economic sustainability goals include identifying sustainable operating standards and best practices and measuring and assessing performance against those practices. The industry lacks a framework for…

Key Performance Indicators to Measure Improvement After Implementation of Total Laboratory Automation Abbott Accelerator a3600.

PubMed

Miler, Marijana; Nikolac Gabaj, Nora; Dukic, Lora; Simundic, Ana-Maria

2017-12-27

The aim of the study was to estimate improvement of work efficiency in the laboratory after implementation of total laboratory automation (TLA) by Abbott Accelerator a3600 in the laboratory with measuring different key performance indicators (KPIs) before and after TLA implementation. The objective was also to recommend steps for defining KPIs in other laboratories. For evaluation of improvement 10 organizational and/or technical KPIs were defined for all phases of laboratory work and measured before (November 2013) and after (from 2015 to 2017) TLA implementation. Out of 10 defined KPIs, 9 were successfully measured and significantly improved. Waiting time for registration of samples in the LIS was significantly reduced from 16 (9-28) to 9 (6-16) minutes after TLA (P < 0.001). After TLA all tests were performed at core biochemistry analyzers which significantly reduced walking distance for sample management (for more than 800 m per worker) and number of tube touches (for almost 50%). Analyzers downtime and engagement time for analyzers maintenance was reduced for 50 h and 28 h per month, respectively. TLA eliminated manual dilution of samples with extreme results with sigma values increment from 3.4 to >6 after TLA. Although median turnaround time TAT for potassium and troponin was higher (for approximately 20 min), number of outliers with TAT >60 min expressed as sigma values were satisfying (>3). Implementation of the TLA improved the most of the processes in our laboratory with 9 out of 10 properly defined and measured KPIs. With proper planning and defining of KPIs, every laboratory could measure changes in daily workflow.

Conceptual framework for holistic dialysis management based on key performance indicators.

PubMed

Liu, Hu-Chen; Itoh, Kenji

2013-10-01

This paper develops a theoretical framework of holistic hospital management based on performance indicators that can be applied to dialysis hospitals, clinics or departments in Japan. Selection of a key indicator set and its validity tests were performed primarily by a questionnaire survey to dialysis experts as well as their statements obtained through interviews. The expert questionnaire asked respondents to rate the degree of "usefulness" for each of 66 indicators on a three-point scale (19 responses collected). Applying the theoretical framework, we selected a minimum set of key performance indicators for dialysis management that can be used in the Japanese context. The indicator set comprised 27 indicators and items that will be collected through three surveys: patient satisfaction, employee satisfaction, and safety culture. The indicators were confirmed by expert judgment from viewpoints of face, content and construct validity as well as their usefulness. This paper established a theoretical framework of performance measurement for holistic dialysis management from primary healthcare stakeholders' perspectives. In this framework, performance indicators were largely divided into healthcare outcomes and performance shaping factors. Indicators of the former type may be applied for the detection of operational problems or weaknesses in a dialysis hospital, clinic or department, while latent causes of each problem can be more effectively addressed by the latter type of indicators in terms of process, structure and culture/climate within the organization. © 2013 The Authors. Therapeutic Apheresis and Dialysis © 2013 International Society for Apheresis.

Time assignment system and its performance aboard the Hitomi satellite

NASA Astrophysics Data System (ADS)

Terada, Yukikatsu; Yamaguchi, Sunao; Sugimoto, Shigenobu; Inoue, Taku; Nakaya, Souhei; Murakami, Maika; Yabe, Seiya; Oshimizu, Kenya; Ogawa, Mina; Dotani, Tadayasu; Ishisaki, Yoshitaka; Mizushima, Kazuyo; Kominato, Takashi; Mine, Hiroaki; Hihara, Hiroki; Iwase, Kaori; Kouzu, Tomomi; Tashiro, Makoto S.; Natsukari, Chikara; Ozaki, Masanobu; Kokubun, Motohide; Takahashi, Tadayuki; Kawakami, Satoko; Kasahara, Masaru; Kumagai, Susumu; Angelini, Lorella; Witthoeft, Michael

2018-01-01

Fast timing capability in x-ray observation of astrophysical objects is one of the key properties for the ASTRO-H (Hitomi) mission. Absolute timing accuracies of 350 or 35 μs are required to achieve nominal scientific goals or to study fast variabilities of specific sources. The satellite carries a GPS receiver to obtain accurate time information, which is distributed from the central onboard computer through the large and complex SpaceWire network. The details of the time system on the hardware and software design are described. In the distribution of the time information, the propagation delays and jitters affect the timing accuracy. Six other items identified within the timing system will also contribute to absolute time error. These error items have been measured and checked on ground to ensure the time error budgets meet the mission requirements. The overall timing performance in combination with hardware performance, software algorithm, and the orbital determination accuracies, etc. under nominal conditions satisfies the mission requirements of 35 μs. This work demonstrates key points for space-use instruments in hardware and software designs and calibration measurements for fine timing accuracy on the order of microseconds for midsized satellites using the SpaceWire (IEEE1355) network.

The effect of biological movement variability on the performance of the golf swing in high- and low-handicapped players.

PubMed

Bradshaw, Elizabeth J; Keogh, Justin W L; Hume, Patria A; Maulder, Peter S; Nortje, Jacques; Marnewick, Michel

2009-06-01

The purpose of this study was to examine the role of neuromotor noise on golf swing performance in high- and low-handicap players. Selected two-dimensional kinematic measures of 20 male golfers (n=10 per high- or low-handicap group) performing 10 golf swings with a 5-iron club was obtained through video analysis. Neuromotor noise was calculated by deducting the standard error of the measurement from the coefficient of variation obtained from intra-individual analysis. Statistical methods included linear regression analysis and one-way analysis of variance using SPSS. Absolute invariance in the key technical positions (e.g., at the top of the backswing) of the golf swing appears to be a more favorable technique for skilled performance.

Physician performance assessment using a composite quality index.

PubMed

Liu, Kaibo; Jain, Shabnam; Shi, Jianjun

2013-07-10

Assessing physician performance is important for the purposes of measuring and improving quality of service and reducing healthcare delivery costs. In recent years, physician performance scorecards have been used to provide feedback on individual measures; however, one key challenge is how to develop a composite quality index that combines multiple measures for overall physician performance evaluation. A controversy arises over establishing appropriate weights to combine indicators in multiple dimensions, and cannot be easily resolved. In this study, we proposed a generic unsupervised learning approach to develop a single composite index for physician performance assessment by using non-negative principal component analysis. We developed a new algorithm named iterative quadratic programming to solve the numerical issue in the non-negative principal component analysis approach. We conducted real case studies to demonstrate the performance of the proposed method. We provided interpretations from both statistical and clinical perspectives to evaluate the developed composite ranking score in practice. In addition, we implemented the root cause assessment techniques to explain physician performance for improvement purposes. Copyright © 2012 John Wiley & Sons, Ltd.

The Proposal of Key Performance Indicators in Facility Management and Determination the Weights of Significance

NASA Astrophysics Data System (ADS)

Rimbalová, Jarmila; Vilčeková, Silvia

2013-11-01

The practice of facilities management is rapidly evolving with the increasing interest in the discourse of sustainable development. The industry and its market are forecasted to develop to include non-core functions, activities traditionally not associated with this profession, but which are increasingly being addressed by facilities managers. The scale of growth in the built environment and the consequential growth of the facility management sector is anticipated to be enormous. Key Performance Indicators (KPI) are measure that provides essential information about performance of facility services delivery. In selecting KPI, it is critical to limit them to those factors that are essential to the organization reaching its goals. It is also important to keep the number of KPI small just to keep everyone's attention focused on achieving the same KPIs. This paper deals with the determination of weights of KPI of FM in terms of the design and use of sustainable buildings.

Transceivers and receivers for quantum key distribution and methods pertaining thereto

DOE Office of Scientific and Technical Information (OSTI.GOV)

DeRose, Christopher; Sarovar, Mohan; Soh, Daniel B.S.

Various technologies for performing continuous-variable (CV) and discrete-variable (DV) quantum key distribution (QKD) with integrated electro-optical circuits are described herein. An integrated DV-QKD system uses Mach-Zehnder modulators to modulate a polarization of photons at a transmitter and select a photon polarization measurement basis at a receiver. An integrated CV-QKD system uses wavelength division multiplexing to send and receive amplitude-modulated and phase-modulated optical signals with a local oscillator signal while maintaining phase coherence between the modulated signals and the local oscillator signal.

Performance indicators and indices of sludge management in urban wastewater treatment plants.

PubMed

Silva, C; Saldanha Matos, J; Rosa, M J

2016-12-15

Sludge (or biosolids) management is highly complex and has a significant cost associated with the biosolids disposal, as well as with the energy and flocculant consumption in the sludge processing units. The sludge management performance indicators (PIs) and indices (PXs) are thus core measures of the performance assessment system developed for urban wastewater treatment plants (WWTPs). The key PIs proposed cover the sludge unit production and dry solids concentration (DS), disposal/beneficial use, quality compliance for agricultural use and costs, whereas the complementary PIs assess the plant reliability and the chemical reagents' use. A key PI was also developed for assessing the phosphorus reclamation, namely through the beneficial use of the biosolids and the reclaimed water in agriculture. The results of a field study with 17 Portuguese urban WWTPs in a 5-year period were used to derive the PI reference values which are neither inherent to the PI formulation nor literature-based. Clusters by sludge type (primary, activated, trickling filter and mixed sludge) and by digestion and dewatering processes were analysed and the reference values for sludge production and dry solids were proposed for two clusters: activated sludge or biofilter WWTPs with primary sedimentation, sludge anaerobic digestion and centrifuge dewatering; activated sludge WWTPs without primary sedimentation and anaerobic digestion and with centrifuge dewatering. The key PXs are computed for the DS after each processing unit and the complementary PXs for the energy consumption and the operating conditions DS-determining. The PX reference values are treatment specific and literature based. The PI and PX system was applied to a WWTP and the results demonstrate that it diagnosis the situation and indicates opportunities and measures for improving the WWTP performance in sludge management. Copyright © 2016 Elsevier Ltd. All rights reserved.

A New Design of the Test Rig to Measure the Transmission Error of Automobile Gearbox

NASA Astrophysics Data System (ADS)

Hou, Yixuan; Zhou, Xiaoqin; He, Xiuzhi; Liu, Zufei; Liu, Qiang

2017-12-01

Noise and vibration affect the performance of automobile gearbox. And transmission error has been regarded as an important excitation source in gear system. Most of current research is focused on the measurement and analysis of single gear drive, and few investigations on the transmission error measurement in complete gearbox were conducted. In order to measure transmission error in a complete automobile gearbox, a kind of electrically closed test rig is developed. Based on the principle of modular design, the test rig can be used to test different types of gearbox by adding necessary modules. The test rig for front engine, rear-wheel-drive gearbox is constructed. And static and modal analysis methods are taken to verify the performance of a key component.

The imperative of culture: a quantitative analysis of the impact of culture on workforce engagement, patient experience, physician engagement, value-based purchasing, and turnover.

PubMed

Owens, Katie; Eggers, Jim; Keller, Stephanie; McDonald, Audrey

2017-01-01

Current uncertainty for the future of the health care landscape is placing an increasing amount of pressure on leadership teams to be prepared to steer their organization forward in a number of potential directions. It is commonly recognized among health care leaders that culture will either enable or disable organizational success. However, very few studies empirically link culture to health care-specific performance outcomes. Nearly every health care organization in the US specifies its cultural aspirations through mission and vision statements and values. Ambitions of patient-centeredness, care for the community, workplace of choice, and world-class quality are frequently cited; yet, little definitive research exists to quantify the importance of building high-performing cultures. Our study examined the impact of cultural attributes defined by a culture index (Cronbach's alpha = 0.88) on corresponding performance with key health care measures. We mapped results of the culture index across data sets, compared results, and evaluated variations in performance among key indicators for leaders. Organizations that perform in the top quartile for our culture index statistically significantly outperformed those in the bottom quartile on all but one key performance indicator tested. The culture top quartile organizations outperformed every domain for employee engagement, physician engagement, patient experience, and overall value-based purchasing performance with statistical significance. Culture index top quartile performers also had a 3.4% lower turnover rate than the bottom quartile performers. Finally, culture index top quartile performers earned an additional 1% on value-based purchasing. Our findings demonstrate a meaningful connection between performance in the culture index and organizational performance. To best impact these key performance outcomes, health care leaders should pay attention to culture and actively steer workforce engagement in attributes that represent the culture index, such as treating patients as valued customers, having congruency between employee and organizational values, promoting employee pride, and encouraging the feeling that being a member of the organization is rewarding, in order to leverage culture as a competitive advantage.

The imperative of culture: a quantitative analysis of the impact of culture on workforce engagement, patient experience, physician engagement, value-based purchasing, and turnover

PubMed Central

Owens, Katie; Eggers, Jim; Keller, Stephanie; McDonald, Audrey

2017-01-01

Current uncertainty for the future of the health care landscape is placing an increasing amount of pressure on leadership teams to be prepared to steer their organization forward in a number of potential directions. It is commonly recognized among health care leaders that culture will either enable or disable organizational success. However, very few studies empirically link culture to health care-specific performance outcomes. Nearly every health care organization in the US specifies its cultural aspirations through mission and vision statements and values. Ambitions of patient-centeredness, care for the community, workplace of choice, and world-class quality are frequently cited; yet, little definitive research exists to quantify the importance of building high-performing cultures. Our study examined the impact of cultural attributes defined by a culture index (Cronbach’s alpha = 0.88) on corresponding performance with key health care measures. We mapped results of the culture index across data sets, compared results, and evaluated variations in performance among key indicators for leaders. Organizations that perform in the top quartile for our culture index statistically significantly outperformed those in the bottom quartile on all but one key performance indicator tested. The culture top quartile organizations outperformed every domain for employee engagement, physician engagement, patient experience, and overall value-based purchasing performance with statistical significance. Culture index top quartile performers also had a 3.4% lower turnover rate than the bottom quartile performers. Finally, culture index top quartile performers earned an additional 1% on value-based purchasing. Our findings demonstrate a meaningful connection between performance in the culture index and organizational performance. To best impact these key performance outcomes, health care leaders should pay attention to culture and actively steer workforce engagement in attributes that represent the culture index, such as treating patients as valued customers, having congruency between employee and organizational values, promoting employee pride, and encouraging the feeling that being a member of the organization is rewarding, in order to leverage culture as a competitive advantage. PMID:29355220

Describing the performance of U.S. hospitals by applying big data analytics.

PubMed

Downing, Nicholas S; Cloninger, Alexander; Venkatesh, Arjun K; Hsieh, Angela; Drye, Elizabeth E; Coifman, Ronald R; Krumholz, Harlan M

2017-01-01

Public reporting of measures of hospital performance is an important component of quality improvement efforts in many countries. However, it can be challenging to provide an overall characterization of hospital performance because there are many measures of quality. In the United States, the Centers for Medicare and Medicaid Services reports over 100 measures that describe various domains of hospital quality, such as outcomes, the patient experience and whether established processes of care are followed. Although individual quality measures provide important insight, it is challenging to understand hospital performance as characterized by multiple quality measures. Accordingly, we developed a novel approach for characterizing hospital performance that highlights the similarities and differences between hospitals and identifies common patterns of hospital performance. Specifically, we built a semi-supervised machine learning algorithm and applied it to the publicly-available quality measures for 1,614 U.S. hospitals to graphically and quantitatively characterize hospital performance. In the resulting visualization, the varying density of hospitals demonstrates that there are key clusters of hospitals that share specific performance profiles, while there are other performance profiles that are rare. Several popular hospital rating systems aggregate some of the quality measures included in our study to produce a composite score; however, hospitals that were top-ranked by such systems were scattered across our visualization, indicating that these top-ranked hospitals actually excel in many different ways. Our application of a novel graph analytics method to data describing U.S. hospitals revealed nuanced differences in performance that are obscured in existing hospital rating systems.

Performance Analysis, Design Considerations, and Applications of Extreme-Scale In Situ Infrastructures

DOE PAGES

Ayachit, Utkarsh; Bauer, Andrew; Duque, Earl P. N.; ...

2016-11-01

A key trend facing extreme-scale computational science is the widening gap between computational and I/O rates, and the challenge that follows is how to best gain insight from simulation data when it is increasingly impractical to save it to persistent storage for subsequent visual exploration and analysis. One approach to this challenge is centered around the idea of in situ processing, where visualization and analysis processing is performed while data is still resident in memory. Our paper examines several key design and performance issues related to the idea of in situ processing at extreme scale on modern platforms: Scalability, overhead,more » performance measurement and analysis, comparison and contrast with a traditional post hoc approach, and interfacing with simulation codes. We illustrate these principles in practice with studies, conducted on large-scale HPC platforms, that include a miniapplication and multiple science application codes, one of which demonstrates in situ methods in use at greater than 1M-way concurrency.« less

Self-referenced continuous-variable quantum key distribution protocol

DOE PAGES

Soh, Daniel Beom Soo; Sarovar, Mohan; Brif, Constantin; ...

2015-10-21

We introduce a new continuous-variable quantum key distribution (CV-QKD) protocol, self-referenced CV-QKD, that eliminates the need for transmission of a high-power local oscillator between the communicating parties. In this protocol, each signal pulse is accompanied by a reference pulse (or a pair of twin reference pulses), used to align Alice’s and Bob’s measurement bases. The method of phase estimation and compensation based on the reference pulse measurement can be viewed as a quantum analog of intradyne detection used in classical coherent communication, which extracts the phase information from the modulated signal. We present a proof-of-principle, fiber-based experimental demonstration of themore » protocol and quantify the expected secret key rates by expressing them in terms of experimental parameters. Our analysis of the secret key rate fully takes into account the inherent uncertainty associated with the quantum nature of the reference pulse(s) and quantifies the limit at which the theoretical key rate approaches that of the respective conventional protocol that requires local oscillator transmission. The self-referenced protocol greatly simplifies the hardware required for CV-QKD, especially for potential integrated photonics implementations of transmitters and receivers, with minimum sacrifice of performance. Furthermore, it provides a pathway towards scalable integrated CV-QKD transceivers, a vital step towards large-scale QKD networks.« less

Self-referenced continuous-variable quantum key distribution protocol

DOE Office of Scientific and Technical Information (OSTI.GOV)

Soh, Daniel Beom Soo; Sarovar, Mohan; Brif, Constantin

We introduce a new continuous-variable quantum key distribution (CV-QKD) protocol, self-referenced CV-QKD, that eliminates the need for transmission of a high-power local oscillator between the communicating parties. In this protocol, each signal pulse is accompanied by a reference pulse (or a pair of twin reference pulses), used to align Alice’s and Bob’s measurement bases. The method of phase estimation and compensation based on the reference pulse measurement can be viewed as a quantum analog of intradyne detection used in classical coherent communication, which extracts the phase information from the modulated signal. We present a proof-of-principle, fiber-based experimental demonstration of themore » protocol and quantify the expected secret key rates by expressing them in terms of experimental parameters. Our analysis of the secret key rate fully takes into account the inherent uncertainty associated with the quantum nature of the reference pulse(s) and quantifies the limit at which the theoretical key rate approaches that of the respective conventional protocol that requires local oscillator transmission. The self-referenced protocol greatly simplifies the hardware required for CV-QKD, especially for potential integrated photonics implementations of transmitters and receivers, with minimum sacrifice of performance. Furthermore, it provides a pathway towards scalable integrated CV-QKD transceivers, a vital step towards large-scale QKD networks.« less

Self-Referenced Continuous-Variable Quantum Key Distribution Protocol

NASA Astrophysics Data System (ADS)

Soh, Daniel B. S.; Brif, Constantin; Coles, Patrick J.; Lütkenhaus, Norbert; Camacho, Ryan M.; Urayama, Junji; Sarovar, Mohan

2015-10-01

We introduce a new continuous-variable quantum key distribution (CV-QKD) protocol, self-referenced CV-QKD, that eliminates the need for transmission of a high-power local oscillator between the communicating parties. In this protocol, each signal pulse is accompanied by a reference pulse (or a pair of twin reference pulses), used to align Alice's and Bob's measurement bases. The method of phase estimation and compensation based on the reference pulse measurement can be viewed as a quantum analog of intradyne detection used in classical coherent communication, which extracts the phase information from the modulated signal. We present a proof-of-principle, fiber-based experimental demonstration of the protocol and quantify the expected secret key rates by expressing them in terms of experimental parameters. Our analysis of the secret key rate fully takes into account the inherent uncertainty associated with the quantum nature of the reference pulse(s) and quantifies the limit at which the theoretical key rate approaches that of the respective conventional protocol that requires local oscillator transmission. The self-referenced protocol greatly simplifies the hardware required for CV-QKD, especially for potential integrated photonics implementations of transmitters and receivers, with minimum sacrifice of performance. As such, it provides a pathway towards scalable integrated CV-QKD transceivers, a vital step towards large-scale QKD networks.

Practical passive decoy state measurement-device-independent quantum key distribution with unstable sources.

PubMed

Liu, Li; Guo, Fen-Zhuo; Wen, Qiao-Yan

2017-09-12

Measurement-device-independent quantum key distribution (MDI-QKD) with the active decoy state method can remove all detector loopholes, and resist the imperfections of sources. But it may lead to side channel attacks and break the security of QKD system. In this paper, we apply the passive decoy state method to the MDI-QKD based on polarization encoding mode. Not only all attacks on detectors can be removed, but also the side channel attacks on sources can be overcome. We get that the MDI-QKD with our passive decoy state method can have a performance comparable to the protocol with the active decoy state method. To fit for the demand of practical application, we discuss intensity fluctuation in the security analysis of MDI-QKD protocol using passive decoy state method, and derive the key generation rate for our protocol with intensity fluctuation. It shows that intensity fluctuation has an adverse effect on the key generation rate which is non-negligible, especially in the case of small data size of total transmitting signals and long distance transmission. We give specific simulations on the relationship between intensity fluctuation and the key generation rate. Furthermore, the statistical fluctuation due to the finite length of data is also taken into account.

Effect of motion on speech recognition.

PubMed

Davis, Timothy J; Grantham, D Wesley; Gifford, René H

2016-07-01

The benefit of spatial separation for talkers in a multi-talker environment is well documented. However, few studies have examined the effect of talker motion on speech recognition. In the current study, we evaluated the effects of (1) motion of the target or distracters, (2) a priori information about the target and distracter spatial configurations, and (3) target and distracter location. In total, seventeen young adults with normal hearing were tested in a large anechoic chamber in two experiments. In Experiment 1, seven stimulus conditions were tested using the Coordinate Response Measure (Bolia et al., 2000) speech corpus, in which subjects were required to report the key words in a target sentence presented simultaneously with two distracter sentences. As in previous studies, there was a significant improvement in key word identification for conditions in which the target and distracters were spatially separated as compared to the co-located conditions. In addition, 1) motion of either talker or distracter resulted in improved performance compared to stationary presentation (talker motion yielded significantly better performance than distracter motion) 2) a priori information regarding stimulus configuration was not beneficial, and 3) performance was significantly better with key words at 0° azimuth as compared to -60° (on the listener's left). Experiment 2 included two additional conditions designed to assess whether the benefit of motion observed in Experiment 1 was due to the motion itself or to the fact that the motion conditions introduced small spatial separations in the target and distracter key words. Results showed that small spatial separations (on the order of 5-8°) resulted in improved performance (relative to co-located key words) whether the sentences were moving or stationary. These results suggest that in the presence of distracting messages, motion of either target or distracters and/or small spatial separation of the key words may be beneficial for sound source segregation and thus for improved speech recognition. Copyright © 2016 Elsevier B.V. All rights reserved.

Strategic Reporting Tool: Balanced Scorecards in Higher Education

ERIC Educational Resources Information Center

Lyddon, Jan W.; McComb, Bruce E.

2008-01-01

In this toolbox article, the authors describe the recommended steps for creating a community college balanced scorecard that measures and reports on key performance indicators based on targets and signal values to end-users, college constituents and external stakeholders. Based on extensive experience in the field, the authors provide a…

KPI Graduate Executive Summary Report, Summer 2000-Winter 2001.

ERIC Educational Resources Information Center

Sheridan Coll. (Ontario).

Summarizes findings from the Key Performance Indicator Satisfaction Survey administered by Sheridan College in the summer 2000, fall 2000, and winter 2001 terms. This survey was administered in compliance with the Ontario government's efforts to increase the accountability of the Colleges of Applied Arts and Technology through the measurement of…

The Case of Public Schools in Argentina

ERIC Educational Resources Information Center

Adrogue, Cecilia; Orlicki, Maria Eugenia

2013-01-01

As Argentina presents problems of malnutrition, the federal in-school feeding program has become a key policy because it provides an important nutritional intervention during a relevant growth period. This paper estimates the effect of the program on academic performance--measured by standardized test scores--with a difference in difference model,…

A Curriculum without Foundation

ERIC Educational Resources Information Center

Boyle, Bill; Bragg, Joanna

2006-01-01

Peter Tymms has written recently ("BERJ", August 2004) on the subject of measuring whether standards are rising in English and mathematics in primary schools based on pupil outcomes from national end of key stage tests. This article takes the position that the performance data debate is an interesting one but peripheral to a far bigger…

Teamwork Key for Pilot Plans on Teacher Pay

ERIC Educational Resources Information Center

Sawchuk, Stephen

2008-01-01

A variety of federally financed grants based on performance pay are providing insights into how districts and teachers can collaborate to implement sustainable programs designed to improve teaching and learning. The question of whether those Teacher Incentive Fund grants will yield measurably higher student achievement, applicant pools with…

Data-Driven Decision Making in Community Colleges: An Integrative Model for Institutional Effectiveness

ERIC Educational Resources Information Center

Callery, Claude Adam

2012-01-01

This qualitative study identified the best practices utilized by community colleges to achieve systemic and cultural agreement in support of the integration of institutional effectiveness measures (key performance indicators) to inform decision making. In addition, the study identifies the relevant motives, organizational structure, and processes…

Customer service: moving from slogan to point of differentiation.

PubMed

Thies, S

1999-01-01

To make its commitment to customer-centered care real, Dean Medical Center interviewed patients and created a "Vital Signs" scorecard. Performance is now measured according to those key areas specified by patients. Face-to-face communication from upper management to all employees and employee training has facilitated the program.

The Logic of Equity Practice in "Queensland State Education"--2010

ERIC Educational Resources Information Center

Taylor, Sandra; Singh, Parlo

2005-01-01

This paper reports on an interview-based study which explored the implementation of a major policy initiative in Queensland, Australia, with particular attention to social justice issues. Interviews were conducted with key policy actors in three sections of the bureaucracy: strategic directions, performance and measurement; curriculum and…

Design of Diaphragm and Coil for Stable Performance of an Eddy Current Type Pressure Sensor.

PubMed

Lee, Hyo Ryeol; Lee, Gil Seung; Kim, Hwa Young; Ahn, Jung Hwan

2016-07-01

The aim of this work was to develop an eddy current type pressure sensor and investigate its fundamental characteristics affected by the mechanical and electrical design parameters of sensor. The sensor has two key components, i.e., diaphragm and coil. On the condition that the outer diameter of sensor is 10 mm, two key parts should be designed so as to keep a good linearity and sensitivity. Experiments showed that aluminum is the best target material for eddy current detection. A round-grooved diaphragm is suggested in order to measure more precisely its deflection caused by applied pressures. The design parameters of a round-grooved diaphragm can be selected depending on the measuring requirements. A developed pressure sensor with diaphragm of t = 0.2 mm and w = 1.05 mm was verified to measure pressure up to 10 MPa with very good linearity and errors of less than 0.16%.

Internet Performance Analysis of South Asian Countries Using End-to-End Internet Performance Measurements

DOE PAGES

Ali, Saqib; Wang, Guojun; Cottrell, Roger Leslie; ...

2018-05-28

Internet performance is highly correlated with key economic development metrics of a region. According to World Bank, the economic growth of a country increases 1.3% with a 10% increase in the speed of the Internet. Therefore, it is necessary to monitor and understand the performance of the Internet links in the region. It helps to figure out the infrastructural inefficiencies, poor resource allocation, and routing issues in the region. Moreover, it provides healthy suggestions for future upgrades. Therefore, the objective of this paper is to understand the Internet performance and routing infrastructure of South Asian countries in comparison to themore » developed world and neighboring countries using end-to-end Internet performance measurements. The South Asian countries comprise nearly 32% of the Internet users in Asia and nearly 16% of the world. The Internet performance metrics in the region are collected through the PingER framework. The framework is developed by the SLAC National Accelerator Laboratory, USA and is running for the last 20 years. PingER has 16 monitoring nodes in the region, and in the last year PingER monitors about 40 sites in South Asia using the ubiquitous ping facility. The collected data is used to estimate the key Internet performance metrics of South Asian countries. The performance metrics are compared with the neighboring countries and the developed world. Particularly, the TCP throughput of the countries is also correlated with different development indices. Further, worldwide Internet connectivity and routing patterns of the countries are investigated to figure out the inconsistencies in the region. Furthermore, the performance analysis revealed that the South Asia region is 7-10 years behind the developed regions of North America (USA and Canada), Europe, and East Asia.« less

Internet Performance Analysis of South Asian Countries Using End-to-End Internet Performance Measurements

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ali, Saqib; Wang, Guojun; Cottrell, Roger Leslie

Internet performance is highly correlated with key economic development metrics of a region. According to World Bank, the economic growth of a country increases 1.3% with a 10% increase in the speed of the Internet. Therefore, it is necessary to monitor and understand the performance of the Internet links in the region. It helps to figure out the infrastructural inefficiencies, poor resource allocation, and routing issues in the region. Moreover, it provides healthy suggestions for future upgrades. Therefore, the objective of this paper is to understand the Internet performance and routing infrastructure of South Asian countries in comparison to themore » developed world and neighboring countries using end-to-end Internet performance measurements. The South Asian countries comprise nearly 32% of the Internet users in Asia and nearly 16% of the world. The Internet performance metrics in the region are collected through the PingER framework. The framework is developed by the SLAC National Accelerator Laboratory, USA and is running for the last 20 years. PingER has 16 monitoring nodes in the region, and in the last year PingER monitors about 40 sites in South Asia using the ubiquitous ping facility. The collected data is used to estimate the key Internet performance metrics of South Asian countries. The performance metrics are compared with the neighboring countries and the developed world. Particularly, the TCP throughput of the countries is also correlated with different development indices. Further, worldwide Internet connectivity and routing patterns of the countries are investigated to figure out the inconsistencies in the region. Furthermore, the performance analysis revealed that the South Asia region is 7-10 years behind the developed regions of North America (USA and Canada), Europe, and East Asia.« less

Electro-optical characterization of GaAs solar cells

NASA Technical Reports Server (NTRS)

Olsen, Larry C.; Dunham, Glen; Addis, F. W.; Huber, Dan; Daling, Dave

1987-01-01

The electro-optical characterization of gallium arsenide p/n solar cells is discussed. The objective is to identify and understand basic mechanisms which limit the performance of high efficiency gallium arsenide solar cells. The approach involves conducting photoresponse and temperature dependent current-voltage measurements, and interpretation of the data in terms of theory to determine key device parameters. Depth concentration profiles are also utilized in formulating a model to explain device performance.

Thermal performance evaluation of the infrared telescope dewar subsystem

NASA Technical Reports Server (NTRS)

Urban, E. W.

1986-01-01

Thermal performance evaluations (TPE) were conducted with the superfluid helium dewar of the Infrared Telescope (IRT) experiment from November 1981 to August 1982. Test included measuring key operating parameters, simulating operations with an attached instrument cryostat and validating servicing, operating and safety procedures. Test activities and results are summarized. All objectives are satisfied except for those involving transfer of low pressure liquid helium (LHe) from a supply dewar into the dewar subsystem.

Differing Roles of Functional Movement Variability as Experience Increases in Gymnastics

PubMed Central

Busquets, Albert; Marina, Michel; Davids, Keith; Angulo-Barroso, Rosa

2016-01-01

Current theories, like Ecological Dynamics, propose that inter-trial movement variability is functional when acquiring or refining movement coordination. Here, we examined how age-based experience levels of gymnasts constrained differences in emergent movement pattern variability during task performance. Specifically, we investigated different roles of movement pattern variability when gymnasts in different age groups performed longswings on a high bar, capturing the range of experience from beginner to advanced status. We also investigated the functionality of the relationships between levels of inter-trial variability and longswing amplitude during performance. One-hundred and thirteen male gymnasts in five age groups were observed performing longswings (with three different experience levels: beginners, intermediates and advanced performers). Performance was evaluated by analysis of key events in coordination of longswing focused on the arm-trunk and trunk-thigh segmental relations. Results revealed that 10 of 18 inter-trial variability measures changed significantly as a function of increasing task experience. Four of ten variability measures conformed to a U-shaped function with age implying exploratory strategies amongst beginners and functional adaptive variability amongst advanced performers. Inter-trial variability of arm-trunk coordination variables (6 of 10) conformed to a \\-shaped curve, as values were reduced to complete the longswings. Changes in coordination variability from beginner to intermediate status were largely restrictive, with only one variability measure related to exploration. Data revealed how inter-trial movement variability in gymnastics, relative to performance outcomes, needs careful interpretation, implying different roles as task experience changes. Key points Inter-trial variability while performing longswings on a high bar was assessed in a large sample (113 participants) divided into five age groups (form beginners to advanced gymnasts). Longswing assessment allowed us to evaluate inter-trial variability in representative performance context. Coordination variability presented two different configurations across experience levels depending on the variable of interest: either a U-shaped or a L- or \\-shaped graph. Increased inter-trial variability of the functional phase events offered flexibility to adapt the longswing performance in the advanced gymnasts, while decreasing variability in arm-trunk coordination modes was critical to improve longswing and to achieve the most advanced level. In addition, the relationship between variability measures and the global performance outcome (i.e. the swing amplitude) revealed different functional roles of movement variability (exploratory or restrictive) as a function of changes in experience levels. PMID:27274664

Development of key performance indicators for prehospital emergency care.

PubMed

Murphy, Adrian; Wakai, Abel; Walsh, Cathal; Cummins, Fergal; O'Sullivan, Ronan

2016-04-01

Key performance indicators (KPIs) are used to monitor and evaluate critical areas of clinical and support functions that influence patient outcome. Traditional prehospital emergency care performance monitoring has focused solely on response time metrics. The landscape of emergency care delivery in Ireland is in the process of significant national reconfiguration. The development of KPIs is therefore considered one of the key priorities in prehospital research. The aim of this study was to develop a suite of KPIs for prehospital emergency care in Ireland. A systematic literature review of prehospital care performance measurement was undertaken followed by a three-round Delphi consensus process facilitated by a broad-based multidisciplinary group of panellists. The consensus process was conducted between June 2012 and October 2013. Each candidate indicator on the Delphi survey questionnaire was rated using a 5-point Likert-type rating scale. Agreement was defined as at least 70% of responders rating an indicator as 'agree' or 'strongly agree' on the rating scale. Data were analysed using descriptive statistics. Sensitivity of the ratings was examined for robustness by bootstrapping the original sample. Of the 78 citations identified by the systematic review, 5 relevant publications were used to select candidate indicators for the Delphi round 1 questionnaire. Response rates in Delphi rounds 1 and 2 were 89% and 83%, respectively. Following the consensus development conference, 101 KPIs reached consensus. Based on the Donabedian framework for quality-of-care indicators, 7 of the KPIs which reached agreement were structure KPIs, 74 were process KPIs and 20 were outcome KPIs. The highest ranked indicator was a process KPI ('Direct transport of ST-elevation myocardial infarction patients to a primary percutaneous intervention (PCI)-capable facility for ECG to PCI time <90 min'). Improving the quality of prehospital care requires the development and implementation of performance measurement using scientifically valid and reliable KPIs. Employing a Delphi panel of key multidisciplinary Emergency Medical Service stakeholders, it was feasible to develop a suite of 101 KPIs for performance monitoring of prehospital emergency care in Ireland. This suite of KPIs may contribute to a framework for achieving safer, better care in the prehospital environment. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/

Rocket Engine Health Management: Early Definition of Critical Flight Measurements

NASA Technical Reports Server (NTRS)

Christenson, Rick L.; Nelson, Michael A.; Butas, John P.

2003-01-01

The NASA led Space Launch Initiative (SLI) program has established key requirements related to safety, reliability, launch availability and operations cost to be met by the next generation of reusable launch vehicles. Key to meeting these requirements will be an integrated vehicle health management ( M) system that includes sensors, harnesses, software, memory, and processors. Such a system must be integrated across all the vehicle subsystems and meet component, subsystem, and system requirements relative to fault detection, fault isolation, and false alarm rate. The purpose of this activity is to evolve techniques for defining critical flight engine system measurements-early within the definition of an engine health management system (EHMS). Two approaches, performance-based and failure mode-based, are integrated to provide a proposed set of measurements to be collected. This integrated approach is applied to MSFC s MC-1 engine. Early identification of measurements supports early identification of candidate sensor systems whose design and impacts to the engine components must be considered in engine design.

In vivo functional neurochemistry of human cortical cholinergic function during visuospatial attention

PubMed Central

Lindner, Michael; Bell, Tiffany; Iqbal, Somya; Mullins, Paul Gerald

2017-01-01

Cortical acetylcholine is involved in key cognitive processes such as visuospatial attention. Dysfunction in the cholinergic system has been described in a number of neuropsychiatric disorders. Levels of brain acetylcholine can be pharmacologically manipulated, but it is not possible to directly measure it in vivo in humans. However, key parts of its biochemical cascade in neural tissue, such as choline, can be measured using magnetic resonance spectroscopy (MRS). There is evidence that levels of choline may be an indirect but proportional measure of acetylcholine availability in brain tissue. In this study, we measured relative choline levels in the parietal cortex using functional (event-related) MRS (fMRS) during performance of a visuospatial attention task, with a modelling approach verified using simulated data. We describe a task-driven interaction effect on choline concentration, specifically driven by contralateral attention shifts. Our results suggest that choline MRS has the potential to serve as a proxy of brain acetylcholine function in humans. PMID:28192451

Particle Engineering in Pharmaceutical Solids Processing: Surface Energy 
Considerations

PubMed Central

Williams, Daryl R.

2015-01-01

During the past 10 years particle engineering in the pharmaceutical industry has become a topic of increasing importance. Engineers and pharmacists need to understand and control a range of key unit manufacturing operations such as milling, granulation, crystallisation, powder mixing and dry powder inhaled drugs which can be very challenging. It has now become very clear that in many of these particle processing operations, the surface energy of the starting, intermediate or final products is a key factor in understanding the processing operation and or the final product performance. This review will consider the surface energy and surface energy heterogeneity of crystalline solids, methods for the measurement of surface energy, effects of milling on powder surface energy, adhesion and cohesion on powder mixtures, crystal habits and surface energy, surface energy and powder granulation processes, performance of DPI systems and finally crystallisation conditions and surface energy. This review will conclude that the importance of surface energy as a significant factor in understanding the performance of many particulate pharmaceutical products and processes has now been clearly established. It is still nevertheless, work in progress both in terms of development of methods and establishing the limits for when surface energy is the key variable of relevance. PMID:25876912

An Engine Research Program Focused on Low Pressure Turbine Aerodynamic Performance

NASA Technical Reports Server (NTRS)

Castner, Raymond; Wyzykowski, John; Chiapetta, Santo; Adamczyk, John

2002-01-01

A comprehensive test program was performed in the Propulsion Systems Laboratory at the NASA Glenn Research Center, Cleveland Ohio using a highly instrumented Pratt and Whitney Canada PW 545 turbofan engine. A key objective of this program was the development of a high-altitude database on small, high-bypass ratio engine performance and operability. In particular, the program documents the impact of altitude (Reynolds Number) on the aero-performance of the low-pressure turbine (fan turbine). A second objective was to assess the ability of a state-of-the-art CFD code to predict the effect of Reynolds number on the efficiency of the low-pressure turbine. CFD simulation performed prior and after the engine tests will be presented and discussed. Key findings are the ability of a state-of-the art CFD code to accurately predict the impact of Reynolds Number on the efficiency and flow capacity of the low-pressure turbine. In addition the CFD simulations showed the turbulent intensity exiting the low-pressure turbine to be high (9%). The level is consistent with measurements taken within an engine.

Monitoring the metering performance of an electronic voltage transformer on-line based on cyber-physics correlation analysis

NASA Astrophysics Data System (ADS)

Zhang, Zhu; Li, Hongbin; Tang, Dengping; Hu, Chen; Jiao, Yang

2017-10-01

Metering performance is the key parameter of an electronic voltage transformer (EVT), and it requires high accuracy. The conventional off-line calibration method using a standard voltage transformer is not suitable for the key equipment in a smart substation, which needs on-line monitoring. In this article, we propose a method for monitoring the metering performance of an EVT on-line based on cyber-physics correlation analysis. By the electrical and physical properties of a substation running in three-phase symmetry, the principal component analysis method is used to separate the metering deviation caused by the primary fluctuation and the EVT anomaly. The characteristic statistics of the measured data during operation are extracted, and the metering performance of the EVT is evaluated by analyzing the change in statistics. The experimental results show that the method successfully monitors the metering deviation of a Class 0.2 EVT accurately. The method demonstrates the accurate evaluation of on-line monitoring of the metering performance on an EVT without a standard voltage transformer.

Perception of touch quality in piano tones.

PubMed

Goebl, Werner; Bresin, Roberto; Fujinaga, Ichiro

2014-11-01

Both timbre and dynamics of isolated piano tones are determined exclusively by the speed with which the hammer hits the strings. This physical view has been challenged by pianists who emphasize the importance of the way the keyboard is touched. This article presents empirical evidence from two perception experiments showing that touch-dependent sound components make sounds with identical hammer velocities but produced with different touch forms clearly distinguishable. The first experiment focused on finger-key sounds: musicians could identify pressed and struck touches. When the finger-key sounds were removed from the sounds, the effect vanished, suggesting that these sounds were the primary identification cue. The second experiment looked at key-keyframe sounds that occur when the key reaches key-bottom. Key-bottom impact was identified from key motion measured by a computer-controlled piano. Musicians were able to discriminate between piano tones that contain a key-bottom sound from those that do not. However, this effect might be attributable to sounds associated with the mechanical components of the piano action. In addition to the demonstrated acoustical effects of different touch forms, visual and tactile modalities may play important roles during piano performance that influence the production and perception of musical expression on the piano.

Guiding Principles and Checklist for Population-Based Quality Metrics

PubMed Central

Brunelli, Steven M.; Maddux, Franklin W.; Parker, Thomas F.; Johnson, Douglas; Nissenson, Allen R.; Collins, Allan; Lacson, Eduardo

2014-01-01

The Centers for Medicare and Medicaid Services oversees the ESRD Quality Incentive Program to ensure that the highest quality of health care is provided by outpatient dialysis facilities that treat patients with ESRD. To that end, Centers for Medicare and Medicaid Services uses clinical performance measures to evaluate quality of care under a pay-for-performance or value-based purchasing model. Now more than ever, the ESRD therapeutic area serves as the vanguard of health care delivery. By translating medical evidence into clinical performance measures, the ESRD Prospective Payment System became the first disease-specific sector using the pay-for-performance model. A major challenge for the creation and implementation of clinical performance measures is the adjustments that are necessary to transition from taking care of individual patients to managing the care of patient populations. The National Quality Forum and others have developed effective and appropriate population-based clinical performance measures quality metrics that can be aggregated at the physician, hospital, dialysis facility, nursing home, or surgery center level. Clinical performance measures considered for endorsement by the National Quality Forum are evaluated using five key criteria: evidence, performance gap, and priority (impact); reliability; validity; feasibility; and usability and use. We have developed a checklist of special considerations for clinical performance measure development according to these National Quality Forum criteria. Although the checklist is focused on ESRD, it could also have broad application to chronic disease states, where health care delivery organizations seek to enhance quality, safety, and efficiency of their services. Clinical performance measures are likely to become the norm for tracking performance for health care insurers. Thus, it is critical that the methodologies used to develop such metrics serve the payer and the provider and most importantly, reflect what represents the best care to improve patient outcomes. PMID:24558050

Perceptual-cognitive skills and performance in orienteering.

PubMed

Guzmán, José F; Pablos, Ana M; Pablos, Carlos

2008-08-01

The goal was analysis of the perceptual-cognitive skills associated with sport performance in orienteering in a sample of 22 elite and 17 nonelite runners. Variables considered were memory, basic orienteering techniques, map reading, symbol knowledge, map-terrain-map identification, and spatial organisation. A computerised questionnaire was developed to measure the variables. The reliability of the test (agreement between experts) was 90%. Findings suggested that competence in performing basic orienteering techniques efficiently was a key variable differentiating between the elite and the nonelite athletes. The results are discussed in comparison with previous studies.

Examining the influence of family physician supply on district health system performance in South Africa: An ecological analysis of key health indicators

PubMed Central

Mash, Robert J.

2017-01-01

Background The supply of appropriate health workers is a key building block in the World Health Organization’s model of effective health systems. Primary care teams are stronger if they contain doctors with postgraduate training in family medicine. The contribution of such family physicians to the performance of primary care systems has not been evaluated in the African context. Family physicians with postgraduate training entered the South African district health system (DHS) from 2011. Aim This study aimed to evaluate the impact of family physicians within the DHS of South Africa. The objectives were to evaluate the impact of an increase in family physician supply in each district (number per 10 000 population) on key health indicators. Setting All 52 South African health districts were included as units of analysis. Methods An ecological study evaluated the correlations between the supply of family physicians and routinely collected data on district performance for two time periods: 2010/2011 and 2014/2015. Results Five years after the introduction of the new generation of family physicians, this study showed no demonstrable correlation between family physician supply and improved health indicators from the macro-perspective of the district. Conclusion The lack of a measurable impact at the level of the district is most likely because of the very low supply of family physicians in the public sector. Studies which evaluate impact closer to the family physician’s circle of control may be better positioned to demonstrate a measurable impact in the short term. PMID:28470076

Low energy range dielectronic recombination of Fluorine-like Fe17+ at the CSRm

NASA Astrophysics Data System (ADS)

Khan, Nadir; Huang, Zhong-Kui; Wen, Wei-Qiang; Mahmood, Sultan; Dou, Li-Jun; Wang, Shu-Xing; Xu, Xin; Wang, Han-Bing; Chen, Chong-Yang; Chuai, Xiao-Ya; Zhu, Xiao-Long; Zhao, Dong-Mei; Mao, Li-Jun; Li, Jie; Yin, Da-Yu; Yang, Jian-Cheng; Yuan, You-Jin; Zhu, Lin-Fan; Ma, Xin-Wen

2018-05-01

The accuracy of dielectronic recombination (DR) data for astrophysics related ions plays a key role in astrophysical plasma modeling. The absolute DR rate coefficient of Fe17+ ions was measured at the main cooler storage ring at the Institute of Modern Physics, Lanzhou, China. The experimental electron-ion collision energy range covers the first Rydberg series up to n = 24 for the DR resonances associated with the {}2P1/2\\to {}2P3/2{{Δ }}n=0 core excitations. A theoretical calculation was performed by using FAC code and compared with the measured DR rate coefficient. Overall reasonable agreement was found between the experimental results and calculations. Moreover, the plasma rate coefficient was deduced from the experimental DR rate coefficient and compared with the available results from the literature. At the low energy range, significant discrepancies were found, and the measured resonances challenge state-of-the-art theory at low collision energies. Supported by the National Key R&D Program of China (2017YFA0402300), the National Natural Science Foundation of China through (11320101003, U1732133, 11611530684) and Key Research Program of Frontier Sciences, CAS (QYZDY-SSW-SLH006)

Preliminary Evaluation of Air Quality Model Performance Utilizing Measurements at the University of Houston Moody Tower and others during the TexAQS-II

NASA Astrophysics Data System (ADS)

Byun, D. W.; Rappenglueck, B.; Lefer, B.

2007-12-01

Accurate meteorological and photochemical modeling efforts are necessary to understand the measurements made during the Texas Air Quality Study (TexAQS-II). The main objective of the study is to understand the meteorological and chemical processes of high ozone and regional haze events in the Eastern Texas, including the Houston-Galveston metropolitan area. Real-time and retrospective meteorological and photochemical model simulations were performed to study key physical and chemical processes in the Houston Galveston Area. In particular, the Vertical Mixing Experiment (VME) at the University of Houston campus was performed on selected days during the TexAQS-II. Results of the MM5 meteorological model and CMAQ air quality model simulations were compared with the VME and other TexAQS-II measurements to understand the interaction of the boundary layer dynamics and photochemical evolution affecting Houston air quality.

The current state of nursing performance measurement, public reporting, and value-based purchasing.

PubMed

Kurtzman, Ellen T; Dawson, Ellen M; Johnson, Jean E

2008-08-01

Over the last decade, there has been a substantial investment in holding health care providers accountable for the quality of care provided in hospitals and other settings of care. This investment has been realized through the proliferation of national policies that address performance measurement, public reporting, and value-based purchasing. Although nurses represent the largest segment of the health care workforce and despite their acknowledged role in patient safety and health care outcomes, they have been largely absent from policy setting in these areas. This article provides an analysis of current nursing performance measurement and public reporting initiatives and presents a summary of emerging trends in value-based purchasing, with an emphasis on activities in the United States. The article synthesizes issues of relevance to advancing the current climate for nursing quality and concludes with key issues for future policy setting.

Introducing a Short Measure of Shared Servant Leadership Impacting Team Performance through Team Behavioral Integration.

PubMed

Sousa, Milton; Van Dierendonck, Dirk

2015-01-01

The research reported in this paper was designed to study the influence of shared servant leadership on team performance through the mediating effect of team behavioral integration, while validating a new short measure of shared servant leadership. A round-robin approach was used to collect data in two similar studies. Study 1 included 244 undergraduate students in 61 teams following an intense HRM business simulation of 2 weeks. The following year, study 2 included 288 students in 72 teams involved in the same simulation. The most important findings were that (1) shared servant leadership was a strong determinant of team behavioral integration, (2) information exchange worked as the main mediating process between shared servant leadership and team performance, and (3) the essence of servant leadership can be captured on the key dimensions of empowerment, humility, stewardship and accountability, allowing for a new promising shortened four-dimensional measure of shared servant leadership.

CCQM-K104 key comparison (avermectin B1a) on the characterization of organic substances for chemical purity

NASA Astrophysics Data System (ADS)

Dai, Xinhua; Zhang, Wei; Li, Hongmei; Huang, Ting; Li, Mengwan; Quan, Can; Zhang, Qinghe; Davies, Stephen R.; Warren, John; Lo, Man-fung; Kakoulides, Elias; Ceyhan Gören, Ahmet; Marbumrung, Sornkrit; Pfeifer, Dietmar; Ün, İlker; Gündüz, Simay; Yilmaz, Hasibe; Kankaew, Pornhatai; Sudsiri, Nittaya; Shearman, Kittiya; Pookrod, Preeyaporn; Polzer, Joachim; Radeck, Wolfgang

2017-01-01

Under the Comité Consultatif pour la Quantité de Matière (CCQM), a key comparison, CCQM-K104, was coordinated by the National Institute of Metrology (NIM). The comparison was designed to demonstrate a laboratory's performance in determining the mass fraction of the main component in a complex high purity organic material. Nine NMIs or DIs participated in the comparison. Eight participants reported their results. An additional impurity was resolved from the avermectin B1a peak and was tentatively identified as an unknown impurity by NMIA (National Measurement Institute (Australia)). It was subsequently identified by NIM as a diastereoisomer of avermectin B1a at the C-26 position. Final reference value (KCRV) = 924.63 mg/g, with uncertainty (k=1) = 3.89 mg/g, and expanded uncertainty = 8.97 mg/g. The degrees of equivalence with the avermectin B1a KCRV for each participant were reported. The measurement results and degrees of equivalence should be indicative of the performance of a laboratory's measurement capability for the purity assignment of organic compounds of high structural complexity (relative molecular mass range of 500 Da -1000 Da and low polarity (-log KOW <= -2). Main text To reach the main text of this paper, click on Final Report. Note that this text is that which appears in Appendix B of the BIPM key comparison database kcdb.bipm.org/. The final report has been peer-reviewed and approved for publication by the CCQM, according to the provisions of the CIPM Mutual Recognition Arrangement (CIPM MRA).

Sustainability in the AAP Bronchiolitis Quality Improvement Project.

PubMed

Shadman, Kristin A; Ralston, Shawn L; Garber, Matthew D; Eickhoff, Jens; Mussman, Grant M; Walley, Susan C; Rice-Conboy, Elizabeth; Coller, Ryan J

2017-11-01

Adherence to American Academy of Pediatrics (AAP) bronchiolitis clinical practice guideline recommendations improved significantly through the AAP's multiinstitutional collaborative, the Bronchiolitis Quality Improvement Project (BQIP). We assessed sustainability of improvements at participating institutions for 1 year following completion of the collaborative. Twenty-one multidisciplinary hospital-based teams provided monthly data for key inpatient bronchiolitis measures during baseline and intervention bronchiolitis seasons. Nine sites provided data in the season following completion of the collaborative. Encounters included children younger than 24 months who were hospitalized for bronchiolitis without comorbid chronic illness, prematurity, or intensive care. Changes between baseline-, intervention-, and sustainability-season data were assessed using generalized linear mixed-effects models with site-specific random effects. Differences between hospital characteristics, baseline performance, and initial improvement between sites that did and did not participate in the sustainability season were compared. A total of 2275 discharges were reviewed, comprising 995 baseline, 877 intervention, and 403 sustainability- season encounters. Improvements in all key bronchiolitis quality measures achieved during the intervention season were maintained during the sustainability season, and orders for intermittent pulse oximetry increased from 40.6% (95% confidence interval [CI], 22.8-61.1) to 79.2% (95% CI, 58.0- 91.3). Sites that did and did not participate in the sustainability season had similar characteristics. BQIP participating sites maintained improvements in key bronchiolitis quality measures for 1 year following the project's completion. This approach, which provided an evidence-based best-practice toolkit while building the quality-improvement capacity of local interdisciplinary teams, may support performance gains that persist beyond the active phase of the collaborative. © 2017 Society of Hospital Medicine

Error analysis of integrated water vapor measured by CIMEL photometer

NASA Astrophysics Data System (ADS)

Berezin, I. A.; Timofeyev, Yu. M.; Virolainen, Ya. A.; Frantsuzova, I. S.; Volkova, K. A.; Poberovsky, A. V.; Holben, B. N.; Smirnov, A.; Slutsker, I.

2017-01-01

Water vapor plays a key role in weather and climate forming, which leads to the need for continuous monitoring of its content in different parts of the Earth. Intercomparison and validation of different methods for integrated water vapor (IWV) measurements are essential for determining the real accuracies of these methods. CIMEL photometers measure IWV at hundreds of ground-based stations of the AERONET network. We analyze simultaneous IWV measurements performed by a CIMEL photometer, an RPG-HATPRO MW radiometer, and a FTIR Bruker 125-HR spectrometer at the Peterhof station of St. Petersburg State University. We show that the CIMEL photometer calibrated by the manufacturer significantly underestimates the IWV obtained by other devices. We may conclude from this intercomparison that it is necessary to perform an additional calibration of the CIMEL photometer, as well as a possible correction of the interpretation technique for CIMEL measurements at the Peterhof site.

INNOVATIVE TECHNOLOGY VERIFICATION REPORT " ...

EPA Pesticide Factsheets

The EnSys Petro Test System developed by Strategic Diagnostics Inc. (SDI), was demonstrated under the U.S. Environmental Protection Agency Superfund Innovative Technology Evaluation Program in June 2000 at the Navy Base Ventura County site in Port Hueneme, California. The purpose of the demonstration was to collect reliable performance and cost data for the EnSys Petro Test System and six other field measurement devices for total petroleum hydrocarbons (TPH) in soil. In addition to assessing ease of device operation, the key objectives of the demonstration included determining the (1) method detection limit, (2) accuracy and precision, (3) effects of interferents and soil moisture content on TPH measurement, (4) sample throughput, and (5) TPH measurement costs for each device. The demonstration involved analysis of both performance evaluation samples and environmental samples collected in four areas contaminated with gasoline, diesel, or other petroleum products. The performance and cost results for a given field measurement device were compared to those for an off-site laboratory reference method,

INNOVATIVE TECHNOLOGY VERIFICATION REPORT " ...

EPA Pesticide Factsheets

The Synchronous Scanning Luminoscope (Luminoscope) developed by the Oak Ridge National Laboratory in collaboration with Environmental Systems Corporation (ESC) was demonstrated under the U.S. Environmental Protection Agency Superfund Innovative Technology Evaluation Program in June 2000 at the Navy Base Ventura County site in Port Hueneme, California. The purpose of the demonstration was to collect reliable performance and cost data for the Luminoscope and six other field measurement devices for total petroleum hydrocarbons (TPH) in soil. In addition to assessing ease of device operation, the key objectives of the demonstration included determining the (1) method detection limit, (2) accuracy and precision, (3) effects of interferents and soil moisture content on TPH measurement, (4) sample throughput, and (5) TPH measurement costs for each device. The demonstration involved analysis of both performance evaluation samples and environmental samples collected in five areas contaminated with gasoline, diesel, lubricating oil, or other petroleum products. The performance and cost results for a given field measurement device were compared to those for an off-site laboratory reference method,

Advanced density profile reflectometry; the state-of-the-art and measurement prospects for ITER

NASA Astrophysics Data System (ADS)

Doyle, E. J.

2006-10-01

Dramatic progress in millimeter-wave technology has allowed the realization of a key goal for ITER diagnostics, the routine measurement of the plasma density profile from millimeter-wave radar (reflectometry) measurements. In reflectometry, the measured round-trip group delay of a probe beam reflected from a plasma cutoff is used to infer the density distribution in the plasma. Reflectometer systems implemented by UCLA on a number of devices employ frequency-modulated continuous-wave (FM-CW), ultrawide-bandwidth, high-resolution radar systems. One such system on DIII-D has routinely demonstrated measurements of the density profile over a range of electron density of 0-6.4x10^19,m-3, with ˜25 μs time and ˜4 mm radial resolution, meeting key ITER requirements. This progress in performance was made possible by multiple advances in the areas of millimeter-wave technology, novel measurement techniques, and improved understanding, including: (i) fast sweep, solid-state, wide bandwidth sources and power amplifiers, (ii) dual polarization measurements to expand the density range, (iii) adaptive radar-based data analysis with parallel processing on a Unix cluster, (iv) high memory depth data acquisition, and (v) advances in full wave code modeling. The benefits of advanced system performance will be illustrated using measurements from a wide range of phenomena, including ELM and fast-ion driven mode dynamics, L-H transition studies and plasma-wall interaction. The measurement capabilities demonstrated by these systems provide a design basis for the development of the main ITER profile reflectometer system. This talk will explore the extent to which these reflectometer system designs, results and experience can be translated to ITER, and will identify what new studies and experimental tests are essential.

Final report, on-going key comparison BIPM.QM-K1, ozone at ambient level, comparison with CMS-ITRI, June 2016

NASA Astrophysics Data System (ADS)

Viallon, Joële; Idrees, Faraz; Moussay, Philippe; Wielgosz, Robert; Lin, Tsai-Yin; Norris, James E.; Hodges, Joseph T.

2017-01-01

As part of the on-going key comparison BIPM.QM-K1, a comparison has been performed between the ozone national standard of the ITRI Center for Measurement Standards (CMS-ITRI) and the common reference standard of the key comparison, maintained by the Bureau International des Poids et Mesures (BIPM), via a transfer standard maintained by the National Institute of Standards and Technology (NIST). The instruments have been compared over a nominal ozone amount-of-substance fraction range of 0 nmol/mol to 500 nmol/mol. Main text To reach the main text of this paper, click on Final Report. Note that this text is that which appears in Appendix B of the BIPM key comparison database kcdb.bipm.org/. The final report has been peer-reviewed and approved for publication by the CCQM, according to the provisions of the CIPM Mutual Recognition Arrangement (CIPM MRA).

Final report, on-going key comparison BIPM.QM-K1: ozone at ambient level, comparison with DMDM, July 2015

NASA Astrophysics Data System (ADS)

Viallon, J.; Moussay, P.; Wielgosz, R.; Bebic, J.; Norris, J. E.; Guenther, F.

2016-01-01

As part of the on-going key comparison BIPM.QM-K1, a comparison has been performed between the ozone national standard of the Directorate of Measures and Precious Metals (DMDM) and the common reference standard of the key comparison, maintained by the Bureau International des Poids et Mesures (BIPM), via a transfer standard maintained by the National Institute of Standards and Technology (NIST). The instruments have been compared over a nominal ozone amount-of-substance fraction range of 0 nmol/mol to 500 nmol/mol Main text To reach the main text of this paper, click on Final Report. Note that this text is that which appears in Appendix B of the BIPM key comparison database kcdb.bipm.org/. The final report has been peer-reviewed and approved for publication by the CCQM, according to the provisions of the CIPM Mutual Recognition Arrangement (CIPM MRA).

Quantum key distribution using continuous-variable non-Gaussian states

NASA Astrophysics Data System (ADS)

Borelli, L. F. M.; Aguiar, L. S.; Roversi, J. A.; Vidiella-Barranco, A.

2016-02-01

In this work, we present a quantum key distribution protocol using continuous-variable non-Gaussian states, homodyne detection and post-selection. The employed signal states are the photon added then subtracted coherent states (PASCS) in which one photon is added and subsequently one photon is subtracted from the field. We analyze the performance of our protocol, compared with a coherent state-based protocol, for two different attacks that could be carried out by the eavesdropper (Eve). We calculate the secret key rate transmission in a lossy line for a superior channel (beam-splitter) attack, and we show that we may increase the secret key generation rate by using the non-Gaussian PASCS rather than coherent states. We also consider the simultaneous quadrature measurement (intercept-resend) attack, and we show that the efficiency of Eve's attack is substantially reduced if PASCS are used as signal states.

Quantum key distribution without detector vulnerabilities using optically seeded lasers

NASA Astrophysics Data System (ADS)

Comandar, L. C.; Lucamarini, M.; Fröhlich, B.; Dynes, J. F.; Sharpe, A. W.; Tam, S. W.-B.; Yuan, Z. L.; Penty, R. V.; Shields, A. J.

2016-05-01

Security in quantum cryptography is continuously challenged by inventive attacks targeting the real components of a cryptographic set-up, and duly restored by new countermeasures to foil them. Owing to their high sensitivity and complex design, detectors are the most frequently attacked components. It was recently shown that two-photon interference from independent light sources can be used to remove any vulnerability from detectors. This new form of detection-safe quantum key distribution (QKD), termed measurement-device-independent (MDI), has been experimentally demonstrated but with modest key rates. Here, we introduce a new pulsed laser seeding technique to obtain high-visibility interference from gain-switched lasers and thereby perform MDI-QKD with unprecedented key rates in excess of 1 megabit per second in the finite-size regime. This represents a two to six orders of magnitude improvement over existing implementations and supports the new scheme as a practical resource for secure quantum communications.

The Key to Successful Achievement as an Undergraduate Student: Confidence and Realistic Expectations?

ERIC Educational Resources Information Center

Nicholson, Laura; Putwain, David; Connors, Liz; Hornby-Atkinson, Pat

2013-01-01

This study examined how expectations of independent study and academic behavioural confidence predicted end-of-semester marks in a sample of undergraduate students. Students' expectations and academic behavioural confidence were measured near the beginning of the semester, and academic performance was taken from aggregated end-of-semester marks.…

A Working Model for the Development, Implementation and Evaluation of an Art Program on the College Level.

ERIC Educational Resources Information Center

Demery, Marie; And Others

Components of an art program that was developed with federal funding are outlined. The model contains information on the grant proposal, including the rationale for funding, implementation strategies, activity timetable, qualifications of key personnel, activity objectives and performance measures, intitutional goals, activity milestones, and…

Threats to Validity in the edTPA Video Component

ERIC Educational Resources Information Center

Choppin, Jeffrey; Meuwissen, Kevin

2017-01-01

The edTPA, a performance assessment designed to generate reliable and valid measures of teaching practice, increasingly is used as a gatekeeping mechanism for beginning teacher licensure in various states, including New York, Washington State, Wisconsin, and Georgia. One of the edTPA's key components is the demonstration of instructional practice…

Assessment in Immersive Virtual Environments: Cases for Learning, of Learning, and as Learning

ERIC Educational Resources Information Center

Code, Jillianne; Zap, Nick

2017-01-01

The key to education reform lies in exploring alternative forms of assessment. Alternative performance assessments provide a more valid measure than multiple-choice tests of students' conceptual understanding and higher-level skills such as problem solving and inquiry. Advances in game-based and virtual environment technologies are creating new…

Examining Neurochemical Determinants of Inspection Time: Development of a Biological Model.

ERIC Educational Resources Information Center

Stough, Con; Thompson, J. C.; Bates, T. C.; Nathan, P. J.

2001-01-01

Describes results of several studies of the neurochemical determinants of inspection time (IT), outlining the significance of several studies in which performance on the IT task is measured before and after modulating key human central nervous system neurotransmitters and receptor systems. Results of these studies suggest a primarily cholinergic…

3D TRUMP - A GBI launch window tool

NASA Astrophysics Data System (ADS)

Karels, Steven N.; Hancock, John; Matchett, Gary

3D TRUMP is a novel GPS and communicatons-link software analysis tool developed for the SDIO's Ground-Based Interceptor (GBI) program. 3D TRUMP uses a computationally efficient analysis tool which provides key GPS-based performance measures for an entire GBI mission's reentry vehicle and interceptor trajectories. Algorithms and sample outputs are presented.

School and Behavioral Outcomes among Inner City Children: Five-Year Follow-Up

ERIC Educational Resources Information Center

Kim, Seijeoung; Mazza, Jessica; Zwanziger, Jack; Henry, David

2014-01-01

Educational achievement is a key determinant of future life chances, but children growing up in poverty tend to do worse by many academic measures. Family, school, and neighborhood contextual characteristics may affect academic outcomes. In an attempt to explore neighborhood and individual-level factors, we performed multilevel analyses to explain…

Quality Differences of Higher Education and Its Determinants in a Less-Developed Country

ERIC Educational Resources Information Center

Sarmiento Espinel, Jaime Andrés; Silva Arias, Adriana Carolina; Van Gameren, Edwin

2015-01-01

Two key measures to determine the quality of higher education are the performance of students and the accreditation of a programme's quality. We analyse the difference in the distributions of the student's scores in a standardised test of economics knowledge between accredited and non-accredited undergraduate economics programmes in a…

Student Success in Higher Education Is Everybody's Business. Report 11-08

ERIC Educational Resources Information Center

Wilson, Stacy; Fuller, Ryan; Mykhaylichenko, Olena

2011-01-01

In this report the authors use key outcome measures to summarize student performance within each higher education system; describe the degree of progress derived from system-level initiatives; and offer recommendations to address impediments and reduce demographic disparities. This report is a starting point for determining how everyone can…

Emerging technology for advancing the treatment of epilepsy using a dynamic control framework.

PubMed

Stanslaski, Scott; Giftakis, John; Stypulkowski, Paul; Carlson, Dave; Afshar, Pedram; Cong, Peng; Denison, Timothy

2011-01-01

We briefly describe a dynamic control system framework for neuromodulation for epilepsy, with an emphasis on its practical challenges and the preliminary validation of key prototype technologies in a chronic animal model. The current state of neuromodulation can be viewed as a classical dynamic control framework such that the nervous system is the classical "plant", the neural stimulator is the controller/actuator, clinical observation, patient diaries and/or measured bio-markers are the sensor, and clinical judgment applied to these sensor inputs forms the state estimator. Technology can potentially address two main factors contributing to the performance limitations of existing systems: "observability," the ability to observe the state of the system from output measurements, and "controllability," the ability to drive the system to a desired state. In addition to improving sensors and actuator performance, methods and tools to better understand disease state dynamics and state estimation are also critical for improving therapy outcomes. We describe our preliminary validation of key "observability" and "controllability" technology blocks using an implanted research tool in an epilepsy disease model. This model allows for testing the key emerging technologies in a representative neural network of therapeutic importance. In the future, we believe these technologies might enable both first principles understanding of neural network behavior for optimizing therapy design, and provide a practical pathway towards clinical translation.

Positivity in healthcare: relation of optimism to performance.

PubMed

Luthans, Kyle W; Lebsack, Sandra A; Lebsack, Richard R

2008-01-01

The purpose of this paper is to explore the linkage between nurses' levels of optimism and performance outcomes. The study sample consisted of 78 nurses in all areas of a large healthcare facility (hospital) in the Midwestern United States. The participants completed surveys to determine their current state of optimism. Supervisory performance appraisal data were gathered in order to measure performance outcomes. Spearman correlations and a one-way ANOVA were used to analyze the data. The results indicated a highly significant positive relationship between the nurses' measured state of optimism and their supervisors' ratings of their commitment to the mission of the hospital, a measure of contribution to increasing customer satisfaction, and an overall measure of work performance. This was an exploratory study. Larger sample sizes and longitudinal data would be beneficial because it is probable that state optimism levels will vary and that it might be more accurate to measure state optimism at several points over time in order to better predict performance outcomes. Finally, the study design does not imply causation. Suggestions for effectively developing and managing nurses' optimism to positively impact their performance are provided. To date, there has been very little empirical evidence assessing the impact that positive psychological capacities such as optimism of key healthcare professionals may have on performance. This paper was designed to help begin to fill this void by examining the relationship between nurses' self-reported optimism and their supervisors' evaluations of their performance.

Sensitivity studies for a space-based methane lidar mission

NASA Astrophysics Data System (ADS)

Kiemle, C.; Quatrevalet, M.; Ehret, G.; Amediek, A.; Fix, A.; Wirth, M.

2011-10-01

Methane is the third most important greenhouse gas in the atmosphere after water vapour and carbon dioxide. A major handicap to quantify the emissions at the Earth's surface in order to better understand biosphere-atmosphere exchange processes and potential climate feedbacks is the lack of accurate and global observations of methane. Space-based integrated path differential absorption (IPDA) lidar has potential to fill this gap, and a Methane Remote Lidar Mission (MERLIN) on a small satellite in polar orbit was proposed by DLR and CNES in the frame of a German-French climate monitoring initiative. System simulations are used to identify key performance parameters and to find an advantageous instrument configuration, given the environmental, technological, and budget constraints. The sensitivity studies use representative averages of the atmospheric and surface state to estimate the measurement precision, i.e. the random uncertainty due to instrument noise. Key performance parameters for MERLIN are average laser power, telescope size, orbit height, surface reflectance, and detector noise. A modest-size lidar instrument with 0.45 W average laser power and 0.55 m telescope diameter on a 506 km orbit could provide 50-km averaged methane column measurement along the sub-satellite track with a precision of about 1% over vegetation. The use of a methane absorption trough at 1.65 μm improves the near-surface measurement sensitivity and vastly relaxes the wavelength stability requirement that was identified as one of the major technological risks in the pre-phase A studies for A-SCOPE, a space-based IPDA lidar for carbon dioxide at the European Space Agency. Minimal humidity and temperature sensitivity at this wavelength position will enable accurate measurements in tropical wetlands, key regions with largely uncertain methane emissions. In contrast to actual passive remote sensors, measurements in Polar Regions will be possible and biases due to aerosol layers and thin ice clouds will be minimised.

Sensitivity studies for a space-based methane lidar mission

NASA Astrophysics Data System (ADS)

Kiemle, C.; Quatrevalet, M.; Ehret, G.; Amediek, A.; Fix, A.; Wirth, M.

2011-06-01

Methane is the third most important greenhouse gas in the atmosphere after water vapour and carbon dioxide. A major handicap to quantify the emissions at the Earth's surface in order to better understand biosphere-atmosphere exchange processes and potential climate feedbacks is the lack of accurate and global observations of methane. Space-based integrated path differential absorption (IPDA) lidar has potential to fill this gap, and a Methane Remote Lidar Mission (MERLIN) on a small satellite in Polar orbit was proposed by DLR and CNES in the frame of a German-French climate monitoring initiative. System simulations are used to identify key performance parameters and to find an advantageous instrument configuration, given the environmental, technological, and budget constraints. The sensitivity studies use representative averages of the atmospheric and surface state to estimate the measurement precision, i.e. the random uncertainty due to instrument noise. Key performance parameters for MERLIN are average laser power, telescope size, orbit height, surface reflectance, and detector noise. A modest-size lidar instrument with 0.45 W average laser power and 0.55 m telescope diameter on a 506 km orbit could provide 50-km averaged methane column measurement along the sub-satellite track with a precision of about 1 % over vegetation. The use of a methane absorption trough at 1.65 μm improves the near-surface measurement sensitivity and vastly relaxes the wavelength stability requirement that was identified as one of the major technological risks in the pre-phase A studies for A-SCOPE, a space-based IPDA lidar for carbon dioxide at the European Space Agency. Minimal humidity and temperature sensitivity at this wavelength position will enable accurate measurements in tropical wetlands, key regions with largely uncertain methane emissions. In contrast to actual passive remote sensors, measurements in Polar Regions will be possible and biases due to aerosol layers and thin ice clouds will be minimised.

The European Society of Gastrointestinal Endoscopy Quality Improvement Initiative: developing performance measures.

PubMed

Rutter, Matthew D; Senore, Carlo; Bisschops, Raf; Domagk, Dirk; Valori, Roland; Kaminski, Michal F; Spada, Cristiano; Bretthauer, Michael; Bennett, Cathy; Bellisario, Cristina; Minozzi, Silvia; Hassan, Cesare; Rees, Colin; Dinis-Ribeiro, Mário; Hucl, Tomas; Ponchon, Thierry; Aabakken, Lars; Fockens, Paul

2016-02-01

The European Society of Gastrointestinal Endoscopy (ESGE) and United European Gastroenterology (UEG) have a vision to create a thriving community of endoscopy services across Europe, collaborating with each other to provide high quality, safe, accurate, patient-centered and accessible endoscopic care. Whilst the boundaries of what can be achieved by advanced endoscopy are continually expanding, we believe that one of the most fundamental steps to achieving our goal is to raise the quality of everyday endoscopy. The development of robust, consensus- and evidence-based key performance measures is the first step in this vision. ESGE and UEG have identified quality of endoscopy as a major priority. This paper explains the rationale behind the ESGE Quality Improvement Initiative and describes the processes that were followed. We recommend that all units develop mechanisms for audit and feedback of endoscopist and service performance using the ESGE performance measures that will be published in future issues of this journal over the next year. We urge all endoscopists and endoscopy services to prioritize quality and to ensure that these performance measures are implemented and monitored at a local level, so that we can provide the highest possible care for our patients.

Performance Indicators in Spine Surgery.

PubMed

St-Pierre, Godefroy Hardy; Yang, Michael H; Bourget-Murray, Jonathan; Thomas, Ken C; Hurlbert, Robin John; Matthes, Nikolas

2018-02-15

Systematic review. To elucidate how performance indicators are currently used in spine surgery. The Patient Protection and Affordable Care Act has given significant traction to the idea that healthcare must provide value to the patient through the introduction of hospital value-based purchasing. The key to implementing this new paradigm is to measure this value notably through performance indicators. MEDLINE, CINAHL Plus, EMBASE, and Google Scholar were searched for studies reporting the use of performance indicators specific to spine surgery. We followed the Prisma-P methodology for a systematic review for entries from January 1980 to July 2016. All full text articles were then reviewed to identify any measure of performance published within the article. This measure was then examined as per the three criteria of established standard, exclusion/risk adjustment, and benchmarking to determine if it constituted a performance indicator. The initial search yielded 85 results among which two relevant studies were identified. The extended search gave a total of 865 citations across databases among which 15 new articles were identified. The grey literature search provided five additional reports which in turn led to six additional articles. A total of 27 full text articles and reports were retrieved and reviewed. We were unable to identify performance indicators. The articles presenting a measure of performance were organized based on how many criteria they lacked. We further examined the next steps to be taken to craft the first performance indicator in spine surgery. The science of performance measurement applied to spine surgery is still in its infancy. Current outcome metrics used in clinical settings require refinement to become performance indicators. Current registry work is providing the necessary foundation, but requires benchmarking to truly measure performance. 1.

From Board to Bedside: How the Application of Financial Structures to Safety and Quality Can Drive Accountability in a Large Health Care System.

PubMed

Austin, J Matthew; Demski, Renee; Callender, Tiffany; Lee, K H Ken; Hoffman, Ann; Allen, Lisa; Radke, Deborah A; Kim, Yungjin; Werthman, Ronald J; Peterson, Ronald R; Pronovost, Peter J

2017-04-01

As the health care system in the United States places greater emphasis on the public reporting of quality and safety data and its use to determine payment, provider organizations must implement structures that ensure discipline and rigor regarding these data. An academic health system, as part of a performance management system, applied four key components of a financial reporting structure to support the goal of top-to-bottom accountability for improving quality and safety. The four components implemented by Johns Hopkins Medicine were governance, accountability, reporting of consolidated quality performance statements, and auditing. Governance is provided by the health system's Patient Safety and Quality Board Committee, which reviews goals and strategy for patient safety and quality, reviews quarterly performance for each entity, and holds organizational leaders accountable for performance. An accountability plan includes escalating levels of review corresponding to the number of months an entity misses the defined performance target for a measure. A consolidated quality statement helps inform the Patient Safety and Quality Board Committee and leadership on key quality and safety issues. An audit evaluates the efficiency and effectiveness of processes for data collection, validation, and storage, as to ensure the accuracy and completeness of quality measure reporting. If hospitals and health systems truly want to prioritize improvements in safety and quality, they will need to create a performance management system that ensures data validity and supports performance accountability. Without valid data, it is difficult to know whether a performance gap is due to data quality or clinical quality. Copyright © 2017 The Joint Commission. Published by Elsevier Inc. All rights reserved.

Infection prevention and control.

PubMed

Pegram, Anne; Bloomfield, Jacqueline

2015-03-18

All newly registered graduate nurses are required to have the appropriate knowledge and understanding to perform the skills required for patient care, specifically the competencies identified in the Nursing and Midwifery Council's essential skills clusters. This article focuses on the third essential skills cluster - infection prevention and control. It provides an overview and discussion of the key skills and behaviours that must be demonstrated to meet the standards set by the Nursing and Midwifery Council. In doing so, it considers the key principles of infection prevention and control, including local and national policies, standard infection control precautions, risk assessment, standard isolation measures and asepsis.

Efficiency of coherent-state quantum cryptography in the presence of loss: Influence of realistic error correction

DOE Office of Scientific and Technical Information (OSTI.GOV)

Heid, Matthias; Luetkenhaus, Norbert

2006-05-15

We investigate the performance of a continuous-variable quantum key distribution scheme in a practical setting. More specifically, we take a nonideal error reconciliation procedure into account. The quantum channel connecting the two honest parties is assumed to be lossy but noiseless. Secret key rates are given for the case that the measurement outcomes are postselected or a reverse reconciliation scheme is applied. The reverse reconciliation scheme loses its initial advantage in the practical setting. If one combines postselection with reverse reconciliation, however, much of this advantage can be recovered.

The internal processes and behavioral dynamics of hospital boards: an exploration of differences between high- and low-performing hospitals.

PubMed

Kane, Nancy M; Clark, Jonathan R; Rivenson, Howard L

2009-01-01

Nonprofit hospital boards are under increasing pressure to improve financial, clinical, and charitable and community benefit performance. Most research on board effectiveness focuses on variables measuring board structure and attributes associated with competing ideal models of board roles. However, the results do not provide clear evidence that one role is superior to another and suggest that in practice boards pursue hybrid roles. Board dynamics and processes have received less attention from researchers, but emerging theoretical frameworks highlight them as key to effective corporate governance. We explored differences in board processes and behavioral dynamics between financially high- and low-performing hospitals, with the goal of developing a better understanding of the best board practices in nonprofit hospitals. A comparative case study approach allowed for in-depth, qualitative assessments of how the internal workings of boards differ between low- and high-performing facilities. Boards of hospitals with strong financial performance exhibited behavioral dynamics and internal processes that differed in important ways from those of hospitals with poor financial performance. Boards need to actively attend to key processes and foster positive group dynamics in decision making to be more effective in governing hospitals.

The opportunity of tracking food waste in school canteens: Guidelines for self-assessment.

PubMed

Derqui, Belén; Fernandez, Vicenc

2017-11-01

Reducing food waste is one of the key challenges of the food system and addressing it in the institutional catering industry can be a quick win. In particular, school canteens are a significant source of food waste and therefore embody a great opportunity to address food waste. The goal of our research is the development of guidelines for audit and self-assessment in measuring and managing food waste produced at school canteens. The purpose of the tool is to standardise food waste audits to be executed either by scholars, school staff or by catering companies with the objective of measuring and reducing food waste at schools. We performed a research among public and private schools and catering companies from which we obtained the key performance indicators to be measured and then pilot-tested the resulting tool in four schools with over 2900 pupil participants, measuring plate waste from over 10,000 trays. This tool will help managers in their efforts towards more sustainable organisations at the same time as the standardisation of food waste audits will provide researchers with comparable data. The study suggests that although there is low awareness on the amount of food wasted at school canteens, managers and staff are highly interested in the topic and would be willing to implement audits and reduction measures. The case study also showed that our tool is easy to implement and not disruptive. Copyright © 2017 Elsevier Ltd. All rights reserved.

Analysis of key technologies for virtual instruments metrology

NASA Astrophysics Data System (ADS)

Liu, Guixiong; Xu, Qingui; Gao, Furong; Guan, Qiuju; Fang, Qiang

2008-12-01

Virtual instruments (VIs) require metrological verification when applied as measuring instruments. Owing to the software-centered architecture, metrological evaluation of VIs includes two aspects: measurement functions and software characteristics. Complexity of software imposes difficulties on metrological testing of VIs. Key approaches and technologies for metrology evaluation of virtual instruments are investigated and analyzed in this paper. The principal issue is evaluation of measurement uncertainty. The nature and regularity of measurement uncertainty caused by software and algorithms can be evaluated by modeling, simulation, analysis, testing and statistics with support of powerful computing capability of PC. Another concern is evaluation of software features like correctness, reliability, stability, security and real-time of VIs. Technologies from software engineering, software testing and computer security domain can be used for these purposes. For example, a variety of black-box testing, white-box testing and modeling approaches can be used to evaluate the reliability of modules, components, applications and the whole VI software. The security of a VI can be assessed by methods like vulnerability scanning and penetration analysis. In order to facilitate metrology institutions to perform metrological verification of VIs efficiently, an automatic metrological tool for the above validation is essential. Based on technologies of numerical simulation, software testing and system benchmarking, a framework for the automatic tool is proposed in this paper. Investigation on implementation of existing automatic tools that perform calculation of measurement uncertainty, software testing and security assessment demonstrates the feasibility of the automatic framework advanced.

Benchmarking surgeon satisfaction at academic health centers: a nationwide comparative survey.

PubMed

Drachman, D A

1996-01-01

Forty-six academic health centers (AHCs) belonging to the University HealthSystem consortium joined forces to compare the efficiency of their surgical services and to identify best practices. In addition to measures of operational performance, surgeon satisfaction with the surgical services provided was measured by using a standardized questionnaire. From hospital records, indicators of the efficiency of surgical services were collected in three main areas: scheduling, preoperative testing and assessment, and the intraoperative process. Responding to a mail questionnaire, a sample of surgeons rated their satisfaction with key aspects of surgical services including scheduling, operating room staff, and equipment/supplies. On the basis of a review of the operational measures and the survey results, high performers were identified. Site visits were made to several of these high performers to uncover the critical factors responsible for their success. The survey revealed distinct variations in surgeon satisfaction across the participating institutions. Numerical benchmarks were obtained for surgeon satisfaction with each key component of surgical services. Scheduling was the most important component of overall surgeon satisfaction, explaining 71% of the variance in the rating of overall satisfaction with surgical services. High operational efficiency and high surgeon satisfaction were not incompatible. Several of the participating institutions were able to achieve both. These results were disseminated to all of the participants at a national meeting as well as in written form. The surgeon satisfaction survey allowed the participants to establish benchmarks for surgeon satisfaction for each key component of the surgical services they receive. The site visits revealed several common characteristics of highly efficient surgical services. Taken by themselves, the participating institutions might have been reluctant to consider adopting these best practices for fear of alienating the surgical staff. The availability of data on surgeon satisfaction showed the participants that these best practices can coexist with high levels of surgeon satisfaction. This has helped to promote their adoption by the other participating institutions.

Is the Web as good as the lab? Comparable performance from Web and lab in cognitive/perceptual experiments.

PubMed

Germine, Laura; Nakayama, Ken; Duchaine, Bradley C; Chabris, Christopher F; Chatterjee, Garga; Wilmer, Jeremy B

2012-10-01

With the increasing sophistication and ubiquity of the Internet, behavioral research is on the cusp of a revolution that will do for population sampling what the computer did for stimulus control and measurement. It remains a common assumption, however, that data from self-selected Web samples must involve a trade-off between participant numbers and data quality. Concerns about data quality are heightened for performance-based cognitive and perceptual measures, particularly those that are timed or that involve complex stimuli. In experiments run with uncompensated, anonymous participants whose motivation for participation is unknown, reduced conscientiousness or lack of focus could produce results that would be difficult to interpret due to decreased overall performance, increased variability of performance, or increased measurement noise. Here, we addressed the question of data quality across a range of cognitive and perceptual tests. For three key performance metrics-mean performance, performance variance, and internal reliability-the results from self-selected Web samples did not differ systematically from those obtained from traditionally recruited and/or lab-tested samples. These findings demonstrate that collecting data from uncompensated, anonymous, unsupervised, self-selected participants need not reduce data quality, even for demanding cognitive and perceptual experiments.

The dysfunctional consequences of a performance measurement system: the case of the Iranian national hospital grading programme.

PubMed

Aryankhesal, Aidin; Sheldon, Trevor A; Mannion, Russell; Mahdipour, Saeade

2015-07-01

Performance measurement systems are increasingly used to reward and improve provider performance. However, such initiatives may also inadvertently induce a range of unintended and dysfunctional side-effects. This study explores the unintended and adverse consequences induced by the Iranian national hospital grading programme, which incorporates financial incentives for meeting nationally defined standards. We interviewed key informants across four key groups with a legitimate interest in healthcare performance: four purposively selected hospitals; four health insurance organizations; the Iranian hospital accreditation body; and one grading agency. The transcribed interviews and field notes were analysed thematically, and subsequently, member checking was conducted. Seven dysfunctional consequences were identified: misrepresentation of data by hospitals; increased anxiety and stress among hospital employees; tunnel vision; financial pressures on poorly graded hospitals; incentives to purchase unnecessary equipment; erosion of public trust; and restricting access to hospital services by patients. These were caused by the way the grading system was implemented: poor standards of audit; the way in which the audit process was conducted; and the timing of audits. The pay for performance element of the grading system and the focus on structural aspects in the standards made improvement in grading particularly difficult for those hospitals that had been assessed as under-performing. Although the Iranian hospital grading system has resulted in a significant increase in the adoption of national standards, it has nevertheless induced a range of perverse outcomes. To mitigate these requires further refinement and recalibration of the system. © The Author(s) 2015.

Continuous performance task in ADHD: Is reaction time variability a key measure?

PubMed

Levy, Florence; Pipingas, Andrew; Harris, Elizabeth V; Farrow, Maree; Silberstein, Richard B

2018-01-01

To compare the use of the Continuous Performance Task (CPT) reaction time variability (intraindividual variability or standard deviation of reaction time), as a measure of vigilance in attention-deficit hyperactivity disorder (ADHD), and stimulant medication response, utilizing a simple CPT X-task vs an A-X-task. Comparative analyses of two separate X-task vs A-X-task data sets, and subgroup analyses of performance on and off medication were conducted. The CPT X-task reaction time variability had a direct relationship to ADHD clinician severity ratings, unlike the CPT A-X-task. Variability in X-task performance was reduced by medication compared with the children's unmedicated performance, but this effect did not reach significance. When the coefficient of variation was applied, severity measures and medication response were significant for the X-task, but not for the A-X-task. The CPT-X-task is a useful clinical screening test for ADHD and medication response. In particular, reaction time variability is related to default mode interference. The A-X-task is less useful in this regard.

Mediators of the relationship between social anxiety and post-event rumination.

PubMed

Chen, Junwen; Rapee, Ronald M; Abbott, Maree J

2013-01-01

A variety of cognitive and attentional factors are hypothesised to be associated with post-event rumination, a key construct that has been proposed to contribute to the maintenance of social anxiety disorder (SAD). The present study aimed to explore factors contributing to post-event rumination following delivery of a speech in a clinical population. 121 participants with SAD completed measures of trait social anxiety a week before they undertook a speech task. After the speech, participants answered several questionnaires assessing their state anxiety, self-evaluation of performance, perceived focus of attention and probability and cost of expected negative evaluation. One-week later, participants completed measures of negative rumination experienced over the week. Results showed two pathways leading to post-event rumination: (1) a direct path from trait social anxiety to post-event rumination and (2) indirect paths from trait social anxiety to post-event rumination via its relationships with inappropriate attentional focus and self-evaluation of performance. The results suggest that post event rumination is at least partly predicted by the extent to which socially anxious individuals negatively perceive their own performance and their allocation of attentional resources to this negative self-image. Current findings support the key relationships among cognitive processes proposed by cognitive models. Copyright © 2012 Elsevier Ltd. All rights reserved.

Surface micromachined MEMS deformable mirror based on hexagonal parallel-plate electrostatic actuator

NASA Astrophysics Data System (ADS)

Ma, Wenying; Ma, Changwei; Wang, Weimin

2018-03-01

Deformable mirrors (DM) based on microelectromechanical system (MEMS) technology are being applied in adaptive optics (AO) system for astronomical telescopes and human eyes more and more. In this paper a MEMS DM with hexagonal actuator is proposed and designed. The relationship between structural design and performance parameters, mainly actuator coupling, is analyzed carefully and calculated. The optimum value of actuator coupling is obtained. A 7-element DM prototype is fabricated using a commercial available standard three-layer polysilicon surface multi-user-MEMS-processes (PolyMUMPs). Some key performances, including surface figure and voltage-displacement curve, are measured through a 3D white light profiler. The measured performances are very consistent with the theoretical values. The proposed DM will benefit the miniaturization of AO systems and lower their cost.

Performability modeling based on real data: A case study

NASA Technical Reports Server (NTRS)

Hsueh, M. C.; Iyer, R. K.; Trivedi, K. S.

1988-01-01

Described is a measurement-based performability model based on error and resource usage data collected on a multiprocessor system. A method for identifying the model structure is introduced and the resulting model is validated against real data. Model development from the collection of raw data to the estimation of the expected reward is described. Both normal and error behavior of the system are characterized. The measured data show that the holding times in key operational and error states are not simple exponentials and that a semi-Markov process is necessary to model system behavior. A reward function, based on the service rate and the error rate in each state, is then defined in order to estimate the performability of the system and to depict the cost of apparent types of errors.

Performability modeling based on real data: A casestudy

NASA Technical Reports Server (NTRS)

Hsueh, M. C.; Iyer, R. K.; Trivedi, K. S.

1987-01-01

Described is a measurement-based performability model based on error and resource usage data collected on a multiprocessor system. A method for identifying the model structure is introduced and the resulting model is validated against real data. Model development from the collection of raw data to the estimation of the expected reward is described. Both normal and error behavior of the system are characterized. The measured data show that the holding times in key operational and error states are not simple exponentials and that a semi-Markov process is necessary to model the system behavior. A reward function, based on the service rate and the error rate in each state, is then defined in order to estimate the performability of the system and to depict the cost of different types of errors.

Employee performance in the knowledge economy: Capturing the keys to success

PubMed Central

Fauth, Rebecca; Bevan, Stephen; Mills, Peter

2009-01-01

The present study examines the key determinants of employee performance in a knowledge-intensive service firm located in the UK. Using data from a pilot study, we mapped eight performance-related behaviors to two measures of global performance to isolate the strongest predictors of the latter. We also examined the degree to which these associations varied depending on whether employees or their managers reported on performance as well as according to the degree of complexity (eg, ongoing learning, multitasking, problem solving, etc.) present in workers’ jobs. Findings revealed that more traditional employee performance-related behaviors (eg, dependability) as well as behaviors that have likely increased in importance in the knowledge economy (eg, sharing ideas and information) accounted for the most variance in reported global performance. Sharing ideas and information was a particularly important predictor for workers in complex jobs. When the performance-related behaviors were regressed on the organization’s annual employee appraisal ratings, only dependability and time management behaviors were significantly associated with the outcome. As organizational success increasingly is dependent on intangible inputs stemming from the ideas, innovations and creativity of its workforce, organizations need to ensure that they are capturing the full range of behaviors that help to define their success. Further research with a diverse range of organizations will help define this further. PMID:22110316

A non-invasive experimental approach for surface temperature measurements on semi-crystalline thermoplastics

NASA Astrophysics Data System (ADS)

Boztepe, Sinan; Gilblas, Remi; de Almeida, Olivier; Le Maoult, Yannick; Schmidt, Fabrice

2017-10-01

Most of the thermoforming processes of thermoplastic polymers and their composites are performed adopting a combined heating and forming stages at which a precursor is heated prior to the forming. This step is done in order to improve formability by softening the thermoplastic polymer. Due to low thermal conductivity and semi-transparency of polymers, infrared (IR) heating is widely used for thermoforming of such materials. Predictive radiation heat transfer models for temperature distributions are therefore critical for optimizations of thermoforming process. One of the key challenges is to build a predictive model including the physical background of radiation heat transfer phenomenon in semi-crystalline thermoplastics as their microcrystalline structure introduces an optically heterogeneous medium. In addition, the accuracy of a predictive model is required to be validated experimentally where IR thermography is one of the suitable methods for such a validation as it provides a non-invasive, full-field surface temperature measurement. Although IR cameras provide a non-invasive measurement, a key issue for obtaining a reliable measurement depends on the optical characteristics of a heated material and the operating spectral band of IR camera. It is desired that the surface of a material to be measured has a spectral band where the material behaves opaque and an employed IR camera operates in the corresponding band. In this study, the optical characteristics of the PO-based polymer are discussed and, an experimental approach is proposed in order to measure the surface temperature of the PO-based polymer via IR thermography. The preliminary analyses showed that IR thermographic measurements may not be simply performed on PO-based polymers and require a correction method as their semi-transparent medium introduce a challenge to obtain reliable surface temperature measurements.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gehin, Jess C; Godfrey, Andrew T; Evans, Thomas M

The Consortium for Advanced Simulation of Light Water Reactors (CASL) is developing a collection of methods and software products known as VERA, the Virtual Environment for Reactor Applications, including a core simulation capability called VERA-CS. A key milestone for this endeavor is to validate VERA against measurements from operating nuclear power reactors. The first step in validation against plant data is to determine the ability of VERA to accurately simulate the initial startup physics tests for Watts Bar Nuclear Power Station, Unit 1 (WBN1) cycle 1. VERA-CS calculations were performed with the Insilico code developed at ORNL using cross sectionmore » processing from the SCALE system and the transport capabilities within the Denovo transport code using the SPN method. The calculations were performed with ENDF/B-VII.0 cross sections in 252 groups (collapsed to 23 groups for the 3D transport solution). The key results of the comparison of calculations with measurements include initial criticality, control rod worth critical configurations, control rod worth, differential boron worth, and isothermal temperature reactivity coefficient (ITC). The VERA results for these parameters show good agreement with measurements, with the exception of the ITC, which requires additional investigation. Results are also compared to those obtained with Monte Carlo methods and a current industry core simulator.« less

High performance optical encryption based on computational ghost imaging with QR code and compressive sensing technique

NASA Astrophysics Data System (ADS)

Zhao, Shengmei; Wang, Le; Liang, Wenqiang; Cheng, Weiwen; Gong, Longyan

2015-10-01

In this paper, we propose a high performance optical encryption (OE) scheme based on computational ghost imaging (GI) with QR code and compressive sensing (CS) technique, named QR-CGI-OE scheme. N random phase screens, generated by Alice, is a secret key and be shared with its authorized user, Bob. The information is first encoded by Alice with QR code, and the QR-coded image is then encrypted with the aid of computational ghost imaging optical system. Here, measurement results from the GI optical system's bucket detector are the encrypted information and be transmitted to Bob. With the key, Bob decrypts the encrypted information to obtain the QR-coded image with GI and CS techniques, and further recovers the information by QR decoding. The experimental and numerical simulated results show that the authorized users can recover completely the original image, whereas the eavesdroppers can not acquire any information about the image even the eavesdropping ratio (ER) is up to 60% at the given measurement times. For the proposed scheme, the number of bits sent from Alice to Bob are reduced considerably and the robustness is enhanced significantly. Meantime, the measurement times in GI system is reduced and the quality of the reconstructed QR-coded image is improved.

Child-Report Measures of Occupational Performance: A Systematic Review

PubMed Central

Totino, Rebekah; Doma, Kenji; Leicht, Anthony; Brown, Nicole; Cuomo, Belinda

2016-01-01

Introduction Improving occupational performance is a key service of occupational therapists and client-centred approach to care is central to clinical practice. As such it is important to comprehensively evaluate the quality of psychometric properties reported across measures of occupational performance; in order to guide assessment and treatment planning. Objective To systematically review the literature on the psychometric properties of child-report measures of occupational performance for children ages 2–18 years. Methods A systematic search of the following six electronic databases was conducted: CINAHL; PsycINFO; EMBASE; PubMed; the Health and Psychosocial Instruments (HAPI) database; and Google Scholar. The quality of the studies was evaluated against the COSMIN taxonomy of measurement properties and the overall quality of psychometric properties was evaluated using pre-set psychometric criteria. Results Fifteen articles and one manual were reviewed to assess the psychometric properties of the six measures–the PEGS, MMD, CAPE, PAC, COSA, and OSA- which met the inclusion criteria. Most of the measures had conducted good quality studies to evaluate the psychometric properties of measures (PEGS, CAPE, PAC, OSA); however, the quality of the studies for two of these measures was relatively weak (MMD, COSA). When integrating the quality of the psychometric properties of the measures with the quality of the studies, the PAC stood out as having superior psychometric qualities. Conclusions The overall quality of the psychometric properties of most measures was limited. There is a need for continuing research into the psychometric properties of child-report measures of occupational performance, and to revise and improve the psychometric properties of existing measures. PMID:26808674

48 CFR 2452.237-70 - Key personnel.

Code of Federal Regulations, 2010 CFR

2010-10-01

... contracts when it is necessary for contract performance to identify the contractor's key personnel: Key... perform as follows: [List Key Personnel and/or positions, and tasks, percentage of effort, number of hours...

Mars environment and magnetic orbiter scientific and measurement objectives.

PubMed

Leblanc, F; Langlais, B; Fouchet, T; Barabash, S; Breuer, D; Chassefière, E; Coates, A; Dehant, V; Forget, F; Lammer, H; Lewis, S; Lopez-Valverde, M; Mandea, M; Menvielle, M; Pais, A; Paetzold, M; Read, P; Sotin, C; Tarits, P; Vennerstrom, S

2009-01-01

In this paper, we summarize our present understanding of Mars' atmosphere, magnetic field, and surface and address past evolution of these features. Key scientific questions concerning Mars' surface, atmosphere, and magnetic field, along with the planet's interaction with solar wind, are discussed. We also define what key parameters and measurements should be performed and the main characteristics of a martian mission that would help to provide answers to these questions. Such a mission--Mars Environment and Magnetic Orbiter (MEMO)--was proposed as an answer to the Cosmic Vision Call of Opportunity as an M-class mission (corresponding to a total European Space Agency cost of less than 300 Meuro). MEMO was designed to study the strong interconnection between the planetary interior, atmosphere, and solar conditions, which is essential to our understanding of planetary evolution, the appearance of life, and its sustainability. The MEMO main platform combined remote sensing and in situ measurements of the atmosphere and the magnetic field during regular incursions into the martian upper atmosphere. The micro-satellite was designed to perform simultaneous in situ solar wind measurements. MEMO was defined to conduct: * Four-dimensional mapping of the martian atmosphere from the surface up to 120 km by measuring wind, temperature, water, and composition, all of which would provide a complete view of the martian climate and photochemical system; Mapping of the low-altitude magnetic field with unprecedented geographical, altitude, local time, and seasonal resolutions; A characterization of the simultaneous responses of the atmosphere, magnetic field, and near-Mars space to solar variability by means of in situ atmospheric and solar wind measurements.

Identifying critical success factors (CSFs) of Facilities Management (FM) in non-low cost high-rise residential buildings

NASA Astrophysics Data System (ADS)

Dahlan, F. M.; Zainuddin, A.

2018-02-01

Critical success factors (CSFs) are important key areas of activity that must be performed well in any Facilities Management (FM) organisation to achieve its missions, objectives or goals. Before implementing CSFs, an FM organisation must identify the key areas where things must be done properly to enable the business to flourish. Although many performance measurements in FM organisation have been discussed in previous research, not much research has been done on CSFs from the perspective of FM business in non-low cost high-rise residential buildings. The purpose of this study is to develop a methodology in developing the CSFs group and CSFs for FM organisation in non-low cost residential buildings. This research will involve three (3) phases of research strategy to achieve the objective of this research.

Analysis of CPolSK-based FSO system working in space-to-ground channel

NASA Astrophysics Data System (ADS)

Su, Yuwei; Sato, Takuro

2018-03-01

In this article, the transmission performance of a circle polarization shift keying (CPolSK)-based free space optical (FSO) system working in space-to-ground channel is analyzed. Formulas describing the optical polarization distortion caused by the atmospheric turbulence and the communication qualities in terms of signal-to-noise-ratio (SNR), bit-error-ratio (BER) and outage probability of the proposed system are derived. Based on the Stokes parameters data measured by a Japanese optical communication satellite, we evaluate the space-to-ground FSO link and simulate the system performance under a varying regime of turbulence strength. The proposed system provides a more efficient way to compensate scintillation effects in a comparison with the on-off-keying (OOK)-based FSO system. These results are useful to the designing and evaluating of a deep space FSO communication system.

Laser based bi-directional Gbit ground links with the Tesat transportable adaptive optical ground station

NASA Astrophysics Data System (ADS)

Heine, Frank; Saucke, Karen; Troendle, Daniel; Motzigemba, Matthias; Bischl, Hermann; Elser, Dominique; Marquardt, Christoph; Henninger, Hennes; Meyer, Rolf; Richter, Ines; Sodnik, Zoran

2017-02-01

Optical ground stations can be an alternative to radio frequency based transmit (forward) and receive (return) systems for data relay services and other applications including direct to earth optical communications from low earth orbit spacecrafts, deep space receivers, space based quantum key distribution systems and Tbps capacity feeder links to geostationary spacecrafts. The Tesat Transportable Adaptive Optical Ground Station is operational since September 2015 at the European Space Agency site in Tenerife, Spain.. This paper reports about the results of the 2016 experimental campaigns including the characterization of the optical channel from Tenerife for an optimized coding scheme, the performance of the T-AOGS under different atmospheric conditions and the first successful measurements of the suitability of the Alphasat LCT optical downlink performance for future continuous variable quantum key distribution systems.

A Taxonomy-Based Approach to Shed Light on the Babel of Mathematical Models for Rice Simulation

NASA Technical Reports Server (NTRS)

Confalonieri, Roberto; Bregaglio, Simone; Adam, Myriam; Ruget, Francoise; Li, Tao; Hasegawa, Toshihiro; Yin, Xinyou; Zhu, Yan; Boote, Kenneth; Buis, Samuel;

Testing cognition in the wild: factors affecting performance and individual consistency in two measures of avian cognition.

PubMed

Shaw, Rachael C

2017-01-01

Developing cognitive tasks to reliably quantify individual differences in cognitive ability is critical to advance our understanding of the fitness consequences of cognition in the wild. Several factors may influence individual performance in a cognitive task, with some being unrelated to the cognitive ability that is the target of the test. It is therefore essential to assess how extraneous factors may affect task performance, particularly for those tasks that are frequently used to quantify individual differences in cognitive ability. The current study therefore measured the performance of wild North Island robins in two tasks commonly used to measure individual differences in avian cognition: a novel motor task and a detour reaching task. The robins' performance in the motor task was affected by prior experience; individuals that had previously participated in a similar task that required a different motor action pattern outperformed naïve subjects. By contrast, detour reaching performance was influenced by an individual's body condition, suggesting that energetic state may affect inhibitory control in robins. Designing tasks that limit the influence of past experience and developing means of standardising motivation across animals tested in the wild remain key challenges to improving current measurements of cognitive ability in birds. Copyright © 2016 Elsevier B.V. All rights reserved.

Performance Analysis Tool for HPC and Big Data Applications on Scientific Clusters

DOE Office of Scientific and Technical Information (OSTI.GOV)

Yoo, Wucherl; Koo, Michelle; Cao, Yu

Big data is prevalent in HPC computing. Many HPC projects rely on complex workflows to analyze terabytes or petabytes of data. These workflows often require running over thousands of CPU cores and performing simultaneous data accesses, data movements, and computation. It is challenging to analyze the performance involving terabytes or petabytes of workflow data or measurement data of the executions, from complex workflows over a large number of nodes and multiple parallel task executions. To help identify performance bottlenecks or debug the performance issues in large-scale scientific applications and scientific clusters, we have developed a performance analysis framework, using state-ofthe-more » art open-source big data processing tools. Our tool can ingest system logs and application performance measurements to extract key performance features, and apply the most sophisticated statistical tools and data mining methods on the performance data. It utilizes an efficient data processing engine to allow users to interactively analyze a large amount of different types of logs and measurements. To illustrate the functionality of the big data analysis framework, we conduct case studies on the workflows from an astronomy project known as the Palomar Transient Factory (PTF) and the job logs from the genome analysis scientific cluster. Our study processed many terabytes of system logs and application performance measurements collected on the HPC systems at NERSC. The implementation of our tool is generic enough to be used for analyzing the performance of other HPC systems and Big Data workows.« less

Authenticated Quantum Key Distribution with Collective Detection using Single Photons

NASA Astrophysics Data System (ADS)

Huang, Wei; Xu, Bing-Jie; Duan, Ji-Tong; Liu, Bin; Su, Qi; He, Yuan-Hang; Jia, Heng-Yue

2016-10-01

We present two authenticated quantum key distribution (AQKD) protocols by utilizing the idea of collective (eavesdropping) detection. One is a two-party AQKD protocol, the other is a multiparty AQKD protocol with star network topology. In these protocols, the classical channels need not be assumed to be authenticated and the single photons are used as the quantum information carriers. To achieve mutual identity authentication and establish a random key in each of the proposed protocols, only one participant should be capable of preparing and measuring single photons, and the main quantum ability that the rest of the participants should have is just performing certain unitary operations. Security analysis shows that these protocols are free from various kinds of attacks, especially the impersonation attack and the man-in-the-middle (MITM) attack.

Tool Efficiency Analysis model research in SEMI industry

NASA Astrophysics Data System (ADS)

Lei, Ma; Nana, Zhang; Zhongqiu, Zhang

2018-06-01

One of the key goals in SEMI industry is to improve equipment through put and ensure equipment production efficiency maximization. This paper is based on SEMI standards in semiconductor equipment control, defines the transaction rules between different tool states, and presents a TEA system model which is to analysis tool performance automatically based on finite state machine. The system was applied to fab tools and verified its effectiveness successfully, and obtained the parameter values used to measure the equipment performance, also including the advices of improvement.

Environmentally Responsible Aviation (ERA) Project - N+2 Advanced Vehicle Concepts Study and Conceptual Design of Subscale Test Vehicle (STV) Final Report

NASA Technical Reports Server (NTRS)

Bonet, John T.; Schellenger, Harvey G.; Rawdon, Blaine K.; Elmer, Kevin R.; Wakayama, Sean R.; Brown, Derrell L.; Guo, Yueping

2011-01-01

NASA has set demanding goals for technology developments to meet national needs to improve fuel efficiency concurrent with improving the environment to enable air transportation growth. A figure shows NASA's subsonic transport system metrics. The results of Boeing ERA N+2 Advanced Vehicle Concept Study show that the Blended Wing Body (BWB) vehicle, with ultra high bypass propulsion systems have the potential to meet the combined NASA ERA N+2 goals. This study had 3 main activities. 1) The development of an advanced vehicle concepts that can meet the NASA system level metrics. 2) Identification of key enabling technologies and the development of technology roadmaps and maturation plans. 3) The development of a subscale test vehicle that can demonstrate and mature the key enabling technologies needed to meet the NASA system level metrics. Technology maturation plans are presented and include key performance parameters and technical performance measures. The plans describe the risks that will be reduced with technology development and the expected progression of technical maturity.

Simulating visibility under reduced acuity and contrast sensitivity.

PubMed

Thompson, William B; Legge, Gordon E; Kersten, Daniel J; Shakespeare, Robert A; Lei, Quan

2017-04-01

Architects and lighting designers have difficulty designing spaces that are accessible to those with low vision, since the complex nature of most architectural spaces requires a site-specific analysis of the visibility of mobility hazards and key landmarks needed for navigation. We describe a method that can be utilized in the architectural design process for simulating the effects of reduced acuity and contrast on visibility. The key contribution is the development of a way to parameterize the simulation using standard clinical measures of acuity and contrast sensitivity. While these measures are known to be imperfect predictors of visual function, they provide a way of characterizing general levels of visual performance that is familiar to both those working in low vision and our target end-users in the architectural and lighting-design communities. We validate the simulation using a letter-recognition task.

Simulating Visibility Under Reduced Acuity and Contrast Sensitivity

PubMed Central

Thompson, William B.; Legge, Gordon E.; Kersten, Daniel J.; Shakespeare, Robert A.; Lei, Quan

2017-01-01

Architects and lighting designers have difficulty designing spaces that are accessible to those with low vision, since the complex nature of most architectural spaces requires a site-specific analysis of the visibility of mobility hazards and key landmarks needed for navigation. We describe a method that can be utilized in the architectural design process for simulating the effects of reduced acuity and contrast on visibility. The key contribution is the development of a way to parameterize the simulation using standard clinical measures of acuity and contrast sensitivity. While these measures are known to be imperfect predictors of visual function, they provide a way of characterizing general levels of visual performance that is familiar to both those working in low vision and our target end-users in the architectural and lighting design communities. We validate the simulation using a letter recognition task. PMID:28375328

Integration of analytical measurements and wireless communications--current issues and future strategies.

PubMed

Diamond, Dermot; Lau, King Tong; Brady, Sarah; Cleary, John

2008-05-15

Rapid developments in wireless communications are opening up opportunities for new ways to perform many types of analytical measurements that up to now have been restricted in scope due to the need to have access to centralised facilities. This paper will address both the potential for new applications and the challenges that currently inhibit more widespread integration of wireless communications with autonomous sensors and analytical devices. Key issues are identified and strategies for closer integration of analytical information and wireless communications systems discussed.

Comparative Analysis of Mass Spectral Similarity Measures on Peak Alignment for Comprehensive Two-Dimensional Gas Chromatography Mass Spectrometry

PubMed Central

2013-01-01

Peak alignment is a critical procedure in mass spectrometry-based biomarker discovery in metabolomics. One of peak alignment approaches to comprehensive two-dimensional gas chromatography mass spectrometry (GC×GC-MS) data is peak matching-based alignment. A key to the peak matching-based alignment is the calculation of mass spectral similarity scores. Various mass spectral similarity measures have been developed mainly for compound identification, but the effect of these spectral similarity measures on the performance of peak matching-based alignment still remains unknown. Therefore, we selected five mass spectral similarity measures, cosine correlation, Pearson's correlation, Spearman's correlation, partial correlation, and part correlation, and examined their effects on peak alignment using two sets of experimental GC×GC-MS data. The results show that the spectral similarity measure does not affect the alignment accuracy significantly in analysis of data from less complex samples, while the partial correlation performs much better than other spectral similarity measures when analyzing experimental data acquired from complex biological samples. PMID:24151524

Analysis of the secrecy of the running key in quantum encryption channels using coherent states of light

NASA Astrophysics Data System (ADS)

Nikulin, Vladimir V.; Hughes, David H.; Malowicki, John; Bedi, Vijit

2015-05-01

Free-space optical communication channels offer secure links with low probability of interception and detection. Despite their point-to-point topology, additional security features may be required in privacy-critical applications. Encryption can be achieved at the physical layer by using quantized values of photons, which makes exploitation of such quantum communication links extremely difficult. One example of such technology is keyed communication in quantum noise, a novel quantum modulation protocol that offers ultra-secure communication with competitive performance characteristics. Its utilization relies on specific coherent measurements to decrypt the signal. The process of measurements is complicated by the inherent and irreducible quantum noise of coherent states. This problem is different from traditional laser communication with coherent detection; therefore continuous efforts are being made to improve the measurement techniques. Quantum-based encryption systems that use the phase of the signal as the information carrier impose aggressive requirements on the accuracy of the measurements when an unauthorized party attempts intercepting the data stream. Therefore, analysis of the secrecy of the data becomes extremely important. In this paper, we present the results of a study that had a goal of assessment of potential vulnerability of the running key. Basic results of the laboratory measurements are combined with simulation studies and statistical analysis that can be used for both conceptual improvement of the encryption approach and for quantitative comparison of secrecy of different quantum communication protocols.

Empirical Analysis of Optical Attenuator Performance in Quantum Key Distribution Systems Using a Particle Model

DTIC Science & Technology

2012-03-01

EMPIRICAL ANALYSIS OF OPTICAL ATTENUATOR PERFORMANCE IN QUANTUM KEY DISTRIBUTION SYSTEMS USING A...DISTRIBUTION IS UNLIMITED AFIT/GCS/ENG/12-01 EMPIRICAL ANALYSIS OF OPTICAL ATTENUATOR PERFORMANCE IN QUANTUM KEY DISTRIBUTION SYSTEMS USING ...challenging as the complexity of actual implementation specifics are considered. Two components common to most quantum key distribution

World University Ranking Systems: An Alternative Approach Using Partial Least Squares Path Modelling

ERIC Educational Resources Information Center

Jajo, Nethal K.; Harrison, Jen

2014-01-01

University rankings are key drivers in national and institutional strategic planning. The increase in the number of university ranking systems and the diversity of methods and indicators used by these systems necessitate the development of an index that can measure a university's performance in all these systems at once. This article presents…

Heterogeneity image patch index and its application to consumer video summarization.

PubMed

Dang, Chinh T; Radha, Hayder

2014-06-01

Automatic video summarization is indispensable for fast browsing and efficient management of large video libraries. In this paper, we introduce an image feature that we refer to as heterogeneity image patch (HIP) index. The proposed HIP index provides a new entropy-based measure of the heterogeneity of patches within any picture. By evaluating this index for every frame in a video sequence, we generate a HIP curve for that sequence. We exploit the HIP curve in solving two categories of video summarization applications: key frame extraction and dynamic video skimming. Under the key frame extraction frame-work, a set of candidate key frames is selected from abundant video frames based on the HIP curve. Then, a proposed patch-based image dissimilarity measure is used to create affinity matrix of these candidates. Finally, a set of key frames is extracted from the affinity matrix using a min–max based algorithm. Under video skimming, we propose a method to measure the distance between a video and its skimmed representation. The video skimming problem is then mapped into an optimization framework and solved by minimizing a HIP-based distance for a set of extracted excerpts. The HIP framework is pixel-based and does not require semantic information or complex camera motion estimation. Our simulation results are based on experiments performed on consumer videos and are compared with state-of-the-art methods. It is shown that the HIP approach outperforms other leading methods, while maintaining low complexity.

COOMET.QM-K93 (COOMET 615/RU/13): key comparison in the field of measuring of the ethanol amount fraction in nitrogen (120 μmol/mol)

NASA Astrophysics Data System (ADS)

Konopelko, L. A.; Efremova, O. V.; Fatina, O. V.; Orshanskaia, A. A.; Rozhnov, M. S.; Melnyk, D. M.; Petryshyn, P. V.

2016-01-01

The relevance of the COOMET.QM-K93 comparison is founded on paying particular attention to reliability of measurements which are performed during the medical examination of drivers of vehicles in order to assess the degree of alcoholic intoxication. Standard gas mixtures of ethanol in nitrogen in cylinders under pressure play a key role in providing metrological assurance of breath-alcohol analyzers. Participating laboratories: VNIIM and Ukrmetrteststandart. This comparison was carried out in 2014-2015. This supplementary comparison supports CMC claims for: ethanol in the range 50-500 μmol/mol in a matrix of either nitrogen or synthetic air. Results: The results are consistent with the reference values. Main text To reach the main text of this paper, click on Final Report. Note that this text is that which appears in Appendix B of the BIPM key comparison database kcdb.bipm.org/. The final report has been peer-reviewed and approved for publication by the CCQM, according to the provisions of the CIPM Mutual Recognition Arrangement (CIPM MRA).

In-situ Monitoring of Internal Local Temperature and Voltage of Proton Exchange Membrane Fuel Cells

PubMed Central

Lee, Chi-Yuan; Fan, Wei-Yuan; Hsieh, Wei-Jung

2010-01-01

The distribution of temperature and voltage of a fuel cell are key factors that influence performance. Conventional sensors are normally large, and are also useful only for making external measurements of fuel cells. Centimeter-scale sensors for making invasive measurements are frequently unable to accurately measure the interior changes of a fuel cell. This work focuses mainly on fabricating flexible multi-functional microsensors (for temperature and voltage) to measure variations in the local temperature and voltage of proton exchange membrane fuel cells (PEMFC) that are based on micro-electro-mechanical systems (MEMS). The power density at 0.5 V without a sensor is 450 mW/cm2, and that with a sensor is 426 mW/cm2. Since the reaction area of a fuel cell with a sensor is approximately 12% smaller than that without a sensor, but the performance of the former is only 5% worse. PMID:22163556

In-situ monitoring of internal local temperature and voltage of proton exchange membrane fuel cells.

PubMed

Lee, Chi-Yuan; Fan, Wei-Yuan; Hsieh, Wei-Jung

2010-01-01

The distribution of temperature and voltage of a fuel cell are key factors that influence performance. Conventional sensors are normally large, and are also useful only for making external measurements of fuel cells. Centimeter-scale sensors for making invasive measurements are frequently unable to accurately measure the interior changes of a fuel cell. This work focuses mainly on fabricating flexible multi-functional microsensors (for temperature and voltage) to measure variations in the local temperature and voltage of proton exchange membrane fuel cells (PEMFC) that are based on micro-electro-mechanical systems (MEMS). The power density at 0.5 V without a sensor is 450 mW/cm(2), and that with a sensor is 426 mW/cm(2). Since the reaction area of a fuel cell with a sensor is approximately 12% smaller than that without a sensor, but the performance of the former is only 5% worse.

Measurement-based reliability/performability models

NASA Technical Reports Server (NTRS)

Hsueh, Mei-Chen

1987-01-01

Measurement-based models based on real error-data collected on a multiprocessor system are described. Model development from the raw error-data to the estimation of cumulative reward is also described. A workload/reliability model is developed based on low-level error and resource usage data collected on an IBM 3081 system during its normal operation in order to evaluate the resource usage/error/recovery process in a large mainframe system. Thus, both normal and erroneous behavior of the system are modeled. The results provide an understanding of the different types of errors and recovery processes. The measured data show that the holding times in key operational and error states are not simple exponentials and that a semi-Markov process is necessary to model the system behavior. A sensitivity analysis is performed to investigate the significance of using a semi-Markov process, as opposed to a Markov process, to model the measured system.

Sensitivity of CAM-Chem/DART MOPITT CO Assimilation Performance to the Choice of Ensemble System Configuration: A Case Study for Fires in the Amazon

NASA Astrophysics Data System (ADS)

Arellano, A. F., Jr.; Tang, W.

2017-12-01

Assimilating observational data of chemical constituents into a modeling system is a powerful approach in assessing changes in atmospheric composition and estimating associated emissions. However, the results of such chemical data assimilation (DA) experiments are largely subject to various key factors such as: a) a priori information, b) error specification and representation, and c) structural biases in the modeling system. Here we investigate the sensitivity of an ensemble-based data assimilation state and emission estimates to these key factors. We focus on investigating the assimilation performance of the Community Earth System Model (CESM)/CAM-Chem with the Data Assimilation Research Testbed (DART) in representing biomass burning plumes in the Amazonia during the 2008 fire season. We conduct the following ensemble DA MOPITT CO experiments: 1) use of monthly-average NCAR's FINN surface fire emissionss, 2) use of daily FINN surface fire emissions, 3) use of daily FINN emissions with climatological injection heights, and 4) use of perturbed FINN emission parameters to represent not only the uncertainties in combustion activity but also in combustion efficiency. We show key diagnostics of assimilation performance for these experiments and verify with available ground-based and aircraft-based measurements.

Characterization Of Dissolved Organic Mattter In The Florida Keys Ecosystem

NASA Astrophysics Data System (ADS)

Adams, D. G.; Shank, G. C.

2009-12-01

Over the past few decades, Scleractinian coral populations in the Florida Keys have increasingly experienced mortality due to bleaching events as well as microbial mediated illnesses such as black band and white band disease. Such pathologies seem to be most correlated with elevated sea surface temperatures, increased UV exposures, and shifts in the microbial community living on the coral itself. Recent studies indicate that corals’ exposure to UV in the Florida Keys is primarily controlled by the concentration of CDOM (Chromophoric Dissolved Organic Matter) in the water column. Further, microbial community alterations may be linked to changes in concentration and chemical composition of the larger DOM (Dissolved Organic Matter) pool. Our research characterized the spatial and temporal properties of DOM in Florida Bay and along the Keys ecosystems using DOC analyses, in-situ water column optical measurements, and spectral analyses including absorbance and fluorescence measurements. We analyzed DOM characteristics along transects running from the mouth of the Shark River at the southwest base of the Everglades, through Florida Bay, and along near-shore Keys coastal waters. Two 12 hour time-series samplings were also performed at the Seven-Mile Bridge, the primary Florida Bay discharge channel to the lower Keys region. Photo-bleaching experiments showed that the chemical characteristics of the DOM pool are altered by exposure to solar radiation. Results also show that DOC (~0.8-5.8 mg C/L) and CDOM (~0.5-16.5 absorbance coefficient at 305nm) concentrations exhibit seasonal fluctuations in our study region. EEM analyses suggest seasonal transitions between primarily marine (summer) and terrestrial (winter) sources along the Keys. We are currently combining EEM-PARAFAC analysis with in-situ optical measurements to model changes in the spectral properties of DOM in the water column. Additionally, we are using stable δ13C isotopic analysis to further characterize DOM sources. Information generated by our study will provide a valuable data set for better understanding DOM bio-geochemical dynamics along the Florida Keys ecosystem and information for future studies linking DOM and the coral community.

The performance measurement manifesto.

PubMed

Eccles, R G

1991-01-01

The leading indicators of business performance cannot be found in financial data alone. Quality, customer satisfaction, innovation, market share--metrics like these often reflect a company's economic condition and growth prospects better than its reported earnings do. Depending on an accounting department to reveal a company's future will leave it hopelessly mired in the past. More and more managers are changing their company's performance measurement systems to track nonfinancial measures and reinforce new competitive strategies. Five activities are essential: developing an information architecture; putting the technology in place to support this architecture; aligning bonuses and other incentives with the new system; drawing on outside resources; and designing an internal process to ensure the other four activities occur. New technologies and more sophisticated databases have made the change to nonfinancial performance measurement systems possible and economically feasible. Industry and trade associations, consulting firms, and public accounting firms that already have well-developed methods for assessing market share and other performance metrics can add to the revolution's momentum--as well as profit from the business opportunities it presents. Every company will have its own key measures and distinctive process for implementing the change. But making it happen will always require careful preparation, perseverance, and the conviction of the CEO that it must be carried through. When one leading company can demonstrate the long-term advantage of its superior performance on quality or innovation or any other nonfinancial measure, it will change the rules for all its rivals forever.

Key performance indicators in British military trauma.

PubMed

Stannard, Adam; Tai, Nigel R; Bowley, Douglas M; Midwinter, Mark; Hodgetts, Tim J

2008-08-01

Key performance indicators (KPI) are tools for assessing process and outcome in systems of health care provision and are an essential component in performance improvement. Although KPI have been used in British military trauma for 10 years, they remain poorly defined and are derived from civilian metrics that do not adjust for the realities of field trauma care. Our aim was to modify current trauma KPI to ensure they more faithfully reflect both the military setting and contemporary evidence in order to both aid accurate calibration of the performance of the British Defence Medical Services and act as a driver for performance improvement. A workshop was convened that was attended by senior, experienced doctors and nurses from all disciplines of trauma care in the British military. "Speciality-specific" KPI were developed by interest groups using evidence-based data where available and collective experience where this was lacking. In a final discussion these were streamlined into 60 KPI covering each phase of trauma management. The introduction of these KPI sets a number of important benchmarks by which British military trauma can be measured. As part of a performance improvement programme, these will allow closer monitoring of our performance and assist efforts to develop, train, and resource British military trauma providers.

Analysis of performance measurement at HR-GR Department using the balance scorecard method

NASA Astrophysics Data System (ADS)

Vienni; Bachtiar, M.

2017-12-01

PT. X is a company engaged in logistics service in Indonesia. Every company will certainly face a dynamic business environment. Competitors not only from domestic but also from overseas. To be successful in achieving its objectives, company should have a comprehensive measurement system as a strategy feedback that will drive the performance of company. HR-GA department is department that coordinate directly with company’s management. Company through departments expect development goals in individual and also support of infrastructure will run smoothly. In 2015, company has taken steps to conduct a balanced scorecard as performance measurement. Nevertheless, a number of factors so it cannot run optimally. This study aims to analyse the current system and provided suggestions in order to give an overview to department related to its current performance. The results of data processing show that there are 8 objective strategies that have been formulated with 9 key performance indicators. Based on the results of scorecard, obtained values of 4.44 for customer perspective, 4.32 for internal business process perspective & 5.00 for learning and growth perspective. It concludes that performance based on perspectives are categorized very well

Position calibration of a 3-DOF hand-controller with hybrid structure

NASA Astrophysics Data System (ADS)

Zhu, Chengcheng; Song, Aiguo

2017-09-01

A hand-controller is a human-robot interactive device, which measures the 3-DOF (Degree of Freedom) position of the human hand and sends it as a command to control robot movement. The device also receives 3-DOF force feedback from the robot and applies it to the human hand. Thus, the precision of 3-DOF position measurements is a key performance factor for hand-controllers. However, when using a hybrid type 3-DOF hand controller, various errors occur and are considered originating from machining and assembly variations within the device. This paper presents a calibration method to improve the position tracking accuracy of hybrid type hand-controllers by determining the actual size of the hand-controller parts. By re-measuring and re-calibrating this kind of hand-controller, the actual size of the key parts that cause errors is determined. Modifying the formula parameters with the actual sizes, which are obtained in the calibrating process, improves the end position tracking accuracy of the device.

GPS synchronized power system phase angle measurements

NASA Astrophysics Data System (ADS)

Wilson, Robert E.; Sterlina, Patrick S.

1994-09-01

This paper discusses the use of Global Positioning System (GPS) synchronized equipment for the measurement and analysis of key power system quantities. Two GPS synchronized phasor measurement units (PMU) were installed before testing. It was indicated that PMUs recorded the dynamic response of the power system phase angles when the northern California power grid was excited by the artificial short circuits. Power system planning engineers perform detailed computer generated simulations of the dynamic response of the power system to naturally occurring short circuits. The computer simulations use models of transmission lines, transformers, circuit breakers, and other high voltage components. This work will compare computer simulations of the same event with field measurement.

Research of the high performance low temperature vortex street flowmeter

NASA Astrophysics Data System (ADS)

Gao, Feng; Chen, Yang; Zhang, Zhen-peng; Geng, Wei-guo

2007-07-01

Flow measurement is the key method for R&D and operation monitoring of liquid rocket engine. Therefore, it is important to measure flux of low temperature liquid propellants for the liquid hydrogen/liquid oxygen or the liquid oxygen/kerosene rocket engine. Presently in China, the level meter and the turbine flowmeter are usually used in the experimentation of the liquid hydrogen/liquid oxygen rocket engine. The level meter can only scale average flux and the precision of the turbine flowmeter (the measuring wild point is 1.5%) can not be ensured due to the reason which there is not devices of low temperature real-time demarcation in China. Therefore, it is required to research the high performance low temperature flow measurement equipment and the vortex street flowmeter is selected because of its advantages. In the paper, some key techniques of low temperature vortex street flowmeter are researched from the design aspect. Firstly, the basic theoretical research of vortex street flowmeter includes signal detection method, shape of vortex producer and effects of dimension of vertex producer to vortex quality. Secondly, low temperature vortex street flowmeter adopts the method of piezoelectric components stress mode. As for the weakness of phase-change, lattice change and fragility for many piezoelectric materials in low temperature, it can not be fulfilled piezoelectric signal and mechanism performance under this condition. Some piezoelectric materials which can be used in low temperature are illustrated in the paper by lots of research in order for the farther research. The article places emphasis upon low temperature trait of piezoelectric materials, and the structure designs of signal detector and calculation of stress, electric charge quantity and heat transfer.

International comparison CCQM-K101: oxygen in nitrogen—a track B comparison and that the matrix contains argon

NASA Astrophysics Data System (ADS)

Zhou, Z.; Han, Q.; Wang, D.; Macé, T.; Kipphardt, H.; Maiwald, M.; Tuma, D.; Uehara, S.; Akima, D.; Shimosaka, T.; Jung, J.; Oh, S.-H.; van der Veen, A.; van Wijk, J. I. T.; Ziel, P. R.; Konopelko, L.; Valkova, M.; Mogale, David M.; Botha, A.; Brewer, P.; Murugan, A.; Doval Minnaro, M.; Miller, M.; Guenther, F.; Kelly, M. E.

2016-01-01

This key comparison aims to assess the capabilities of the participants to determine the amount-of-substance fraction oxygen in nitrogen. The GAWG has classified this as a track B comparison, due to the unexpected 50 μmol/mol argon mole fraction content of the transfer standards, which effects the achievable performance of some measurement techniques such a GC-TCD. The separation of oxygen and argon is challenging, and not all systems in use are equally well designed for it. As this analytical challenge due to a substantial fraction of argon in the transfer standards became a reality, the Gas Analysis Working Group (GAWG) decided to qualify this key comparison as a regular key comparison and not as a core comparison, which may be used to support calibration and measurement capabilities (CMCs) for oxygen in nitrogen, or for oxygen in nitrogen mixtures containing argon only (see also the section on support to CMCs). Main text To reach the main text of this paper, click on Final Report. Note that this text is that which appears in Appendix B of the BIPM key comparison database kcdb.bipm.org/. The final report has been peer-reviewed and approved for publication by the CCQM, according to the provisions of the CIPM Mutual Recognition Arrangement (CIPM MRA).

Modification of a compressor performance test bench for liquid slugging observation in refrigeration compressors

NASA Astrophysics Data System (ADS)

Ola, Max; Thomas, Christiane; Hesse, Ullrich

2017-08-01

Compressor performance test procedures are defined by the standard DIN EN 13771, wherein a variety of possible calorimeter and flow rate measurement methods are suggested. One option is the selection of two independent measurement methods. The accuracies of both selected measurement methods are essential. The second option requires only one method. However the measurement accuracy of the used device has to be verified and recalibrated on a regular basis. The compressor performance test facility at the Technische Universitaet Dresden uses a calibrated flow measurement sensor, a hot gas bypass and a mixed flow heat exchanger. The test bench can easily be modified for tests of various compressor types at different operating ranges and with various refrigerants. In addition, the modified test setup enables the investigation of long term liquid slug and its effects on the compressor. The modification comprises observational components, adjustments of the control system, safety measures and a customized oil recirculation system for compressors which do not contain an integrated oil sump or oil level regulation system. This paper describes the setup of the test bench, its functional principle, the key modifications, first test results and an evaluation of the energy balance.

Getting something out of nothing in the measurement-device-independent quantum key distribution

NASA Astrophysics Data System (ADS)

Tan, Yong-Gang; Cai, Qing-Yu; Yang, Hai-Feng; Hu, Yao-Hua

2015-11-01

Because of the monogamy of entanglement, the measurement-device-independent quantum key distribution is immune to the side-information leaking of the measurement devices. When the correlated measurement outcomes are generated from the dark counts, no entanglement is actually obtained. However, secure key bits can still be proven to be generated from these measurement outcomes. Especially, we will give numerical studies on the contributions of dark counts to the key generation rate in practical decoy state MDI-QKD where a signal source, a weaker decoy source and a vacuum decoy source are used by either legitimate key distributer.

Experience measuring performance improvement in multiphase picture archiving and communications systems implementations.

PubMed

Reed, G; Reed, D H

1999-05-01

When planning a picture archiving and communications system (PACS) implementation and determining which equipment will be implemented in earlier and later phases, collection and analysis of selected data will aid in setting implementation priorities. If baseline data are acquired relative to performance objectives, the same information used for implementation planning can be used to measure performance improvement and outcomes. The main categories of data to choose from are: (1) financial data; (2) productivity data; (3) operational parameters; (4) clinical data; and (5) information about customer satisfaction. In the authors' experience, detailed workflow data have not proved valuable in measuring PACS performance and outcomes. Reviewing only one category of data in planning will not provide adequate basis for targeting operational improvements that will lead to the most significant gains. Quality improvement takes into account all factors in production: human capacity, materials, operating capital and assets. Once we have identified key areas of focus for quality improvement in each phase, we can translate objectives into implementation requirements and finally into detailed functional and performance requirements. Here, Integration Resources reports its experience measuring PACS performance relative to phased implementation strategies for three large medical centers. Each medical center had its own objectives for overcoming image management, physical/geographical, and functional/technical barriers. The report outlines (1) principal financial and nonfinancial measures used as performance indicators; (2) implementation strategies chosen by each of the three medical centers; and (3) the results of those strategies as compared with baseline data.

The nonlinear, complex sequential organization of behavior in schizophrenic patients: neurocognitive strategies and clinical correlations.

PubMed

Paulus, M P; Perry, W; Braff, D L

1999-09-01

Thought disorder is a hallmark of schizophrenia and can be inferred from disorganized behavior. Measures of the sequential organization of behavior are important because they reflect the cognitive processes of the selection and sequencing of behavioral elements, which generate observable and analyzable behavioral patterns. In this context, sequences of choices generated by schizophrenic patients in a two-choice guessing task fluctuate significantly, which reflects an "oscillating dysregulation" between highly predictable and highly unpredictable subsequences within a single test session. In this study, we aimed to clarify the significance of dysregulation by seeing whether demographic, clinical, neuropsychological, and psychological measures predict the degree of dysregulation observed on this two-choice task. Thirty schizophrenic patients repeatedly performed a LEFT or RIGHT key press that was followed by a stimulus, which occurred randomly on the left or right side of the computer screen. Thus, the stimulus location had nothing to do with the key press behavior. The range of key press sequence predictabilities as measured by the dynamical entropy was used to quantify the dysregulation of response sequences and reflects the range of fixity and randomness of the responses. A factor analysis was performed and step-wise multiple regression analyses were used to relate the factor scores to demographic, clinical, symptomatic, Wisconsin Card Sorting Test (WCST), and Rorschach variables. The LEFT/RIGHT key press sequences were determined by three factors: 1) the degree of win-stay/lose-shift strategy; 2) the degree of contextual influence on the current choice; and 3) the degree of dysregulation on the choice task. Demographic and clinical variables did not predict any of the three response patterns on the choice task. In contrast, the WCST and Rorschach test predicted performance on various factors of choice task response patterns. Schizophrenic patients employ several rules, i.e., "win-stay/lose-shift" and "decide according to the previous choice," that fluctuate significantly when generating sequences on this task, confirming that a basic behavioral dysregulation occurs in a single schizophrenic subject across a single test session. The organization or the "temporal architecture" of the behavioral sequences is not related to symptoms per se, but is related to deficits in executive functioning, problem solving, and perceptual organizational abilities.

First Measurement of Several β-Delayed Neutron Emitting Isotopes Beyond N=126.

PubMed

Caballero-Folch, R; Domingo-Pardo, C; Agramunt, J; Algora, A; Ameil, F; Arcones, A; Ayyad, Y; Benlliure, J; Borzov, I N; Bowry, M; Calviño, F; Cano-Ott, D; Cortés, G; Davinson, T; Dillmann, I; Estrade, A; Evdokimov, A; Faestermann, T; Farinon, F; Galaviz, D; García, A R; Geissel, H; Gelletly, W; Gernhäuser, R; Gómez-Hornillos, M B; Guerrero, C; Heil, M; Hinke, C; Knöbel, R; Kojouharov, I; Kurcewicz, J; Kurz, N; Litvinov, Yu A; Maier, L; Marganiec, J; Marketin, T; Marta, M; Martínez, T; Martínez-Pinedo, G; Montes, F; Mukha, I; Napoli, D R; Nociforo, C; Paradela, C; Pietri, S; Podolyák, Zs; Prochazka, A; Rice, S; Riego, A; Rubio, B; Schaffner, H; Scheidenberger, Ch; Smith, K; Sokol, E; Steiger, K; Sun, B; Taín, J L; Takechi, M; Testov, D; Weick, H; Wilson, E; Winfield, J S; Wood, R; Woods, P; Yeremin, A

2016-07-01

The β-delayed neutron emission probabilities of neutron rich Hg and Tl nuclei have been measured together with β-decay half-lives for 20 isotopes of Au, Hg, Tl, Pb, and Bi in the mass region N≳126. These are the heaviest species where neutron emission has been observed so far. These measurements provide key information to evaluate the performance of nuclear microscopic and phenomenological models in reproducing the high-energy part of the β-decay strength distribution. This provides important constraints on global theoretical models currently used in r-process nucleosynthesis.

Comparison of Various Similarity Measures for Average Image Hash in Mobile Phone Application

NASA Astrophysics Data System (ADS)

Farisa Chaerul Haviana, Sam; Taufik, Muhammad

2017-04-01

One of the main issue in Content Based Image Retrieval (CIBR) is similarity measures for resulting image hashes. The main key challenge is to find the most benefits distance or similarity measures for calculating the similarity in term of speed and computing costs, specially under limited computing capabilities device like mobile phone. This study we utilize twelve most common and popular distance or similarity measures technique implemented in mobile phone application, to be compared and studied. The results show that all similarity measures implemented in this study was perform equally under mobile phone application. This gives more possibilities for method combinations to be implemented for image retrieval.

Black Carbon Measurement Intercomparison during the 2017 Black Carbon Shootout

NASA Astrophysics Data System (ADS)

Shingler, T.; Moore, R.; Winstead, E.; Robinson, C. E.; Shook, M.; Crosbie, E.; Ziemba, L. D.; Thornhill, K. L., II; Sorooshian, A.; Anderson, B. E.

2017-12-01

The NASA Langley Aerosol Research Group (LARGE) provides multiple black carbon (BC) based aerosol particle measurements and engine emission factors for airborne and ground-based field campaigns and laboratory studies. These datasets are made available to the general public where accuracy is key to enable further use in environmental assessments, models, and validation studies. Studies are needed to establish the accuracy and precision of BC measurements of particles with varying physical properties using a variety of detection techniques. Work is also needed to develop calibration and correction schemes for new sensors and to link these measurements to heritage instruments on which our understanding of BC emissions and characteristics has been established. A BC measurement intercomparison was performed at Langley Research Center using particles generated from a mini-CAST (Jing) diffusion flame soot generator. The particles were passed to instruments measuring optical absorption, extinction, scattering and black carbon mass. Filter based measurements of optical absorption were performed using a PSAP (Radiance Research) and a TAP (BMI). Absorption was also measured using two photoacoustic based instruments: the MSS-plus (AVL) and PASS-3 (DMT). Measurements of aerosol extinction were performed using three CAPS PM-ex (Aerodyne Research) instruments at multiple wavelengths. Two Artium LII-300 units (standard and high-sensitivity) were used to measure black carbon mass via laser incandescence. Black carbon measurements were correlated to mass collected concurrently on a filter and analyzed by OC/EC analysis (Sunset Labs). Black carbon quantification measurements are analyzed between instruments to assess agreement between platforms using manufacturer's calibration settings as well as after calibrations performed to a single standard soot source (mini-CAST). Sampling was also performed from behind a Falcon aircraft at multiple thrust settings and downwind of runway at an international airport with commercial takeoffs and landings.

Measuring Information Security Performance with 10 by 10 Model for Holistic State Evaluation.

PubMed

Bernik, Igor; Prislan, Kaja

Organizations should measure their information security performance if they wish to take the right decisions and develop it in line with their security needs. Since the measurement of information security is generally underdeveloped in practice and many organizations find the existing recommendations too complex, the paper presents a solution in the form of a 10 by 10 information security performance measurement model. The model-ISP 10×10M is composed of ten critical success factors, 100 key performance indicators and 6 performance levels. Its content was devised on the basis of findings presented in the current research studies and standards, while its structure results from an empirical research conducted among information security professionals from Slovenia. Results of the study show that a high level of information security performance is mostly dependent on measures aimed at managing information risks, employees and information sources, while formal and environmental factors have a lesser impact. Experts believe that information security should evolve systematically, where it's recommended that beginning steps include technical, logical and physical security controls, while advanced activities should relate predominantly strategic management activities. By applying the proposed model, organizations are able to determine the actual level of information security performance based on the weighted indexing technique. In this manner they identify the measures they ought to develop in order to improve the current situation. The ISP 10×10M is a useful tool for conducting internal system evaluations and decision-making. It may also be applied to a larger sample of organizations in order to determine the general state-of-play for research purposes.

Identifying Key Performance Indicators for Holistic Hospital Management with a Modified DEMATEL Approach

PubMed Central

Si, Sheng-Li; You, Xiao-Yue; Huang, Jia

2017-01-01

Performance analysis is an important way for hospitals to achieve higher efficiency and effectiveness in providing services to their customers. The performance of the healthcare system can be measured by many indicators, but it is difficult to improve them simultaneously due to the limited resources. A feasible way is to identify the central and influential indicators to improve healthcare performance in a stepwise manner. In this paper, we propose a hybrid multiple criteria decision making (MCDM) approach to identify key performance indicators (KPIs) for holistic hospital management. First, through integrating evidential reasoning approach and interval 2-tuple linguistic variables, various assessments of performance indicators provided by healthcare experts are modeled. Then, the decision making trial and evaluation laboratory (DEMATEL) technique is adopted to build an interactive network and visualize the causal relationships between the performance indicators. Finally, an empirical case study is provided to demonstrate the proposed approach for improving the efficiency of healthcare management. The results show that “accidents/adverse events”, “nosocomial infection”, ‘‘incidents/errors”, “number of operations/procedures” are significant influential indicators. Also, the indicators of “length of stay”, “bed occupancy” and “financial measures” play important roles in performance evaluation of the healthcare organization. The proposed decision making approach could be considered as a reference for healthcare administrators to enhance the performance of their healthcare institutions. PMID:28825613

Implementation of renal key performance indicators: promoting improved clinical practice.

PubMed

Toussaint, Nigel D; McMahon, Lawrence P; Dowling, Gregory; Soding, Jenny; Safe, Maria; Knight, Richard; Fair, Kathleen; Linehan, Leanne; Walker, Rowan G; Power, David A

2015-03-01

In the Australian state of Victoria, the Renal Health Clinical Network (RHCN) of the Department of Health Victoria established a Renal Key Performance Indicator (KPI) Working Group in 2011. The group developed four KPIs related to chronic kidney disease and dialysis. A transplant working group of the RHCN developed two additional KPIs. The aim was to develop clinical indicators to measure performance of renal services to drive service improvement. A data collection and benchmarking programme was established, with data provided monthly to the Department using a purpose-designed website portal. The KPI Working Group is responsible for analysing data each quarter and ensuring indicators remain accurate and relevant. Each indicator has clear definitions and targets, and assess (i) patient education, (ii) timely creation of vascular access for haemodialysis, (iii) proportion of patients dialysing at home, (iv) incidence of dialysis-related peritonitis, (v) incidence of pre-emptive renal transplantation, and (vi) timely listing of patients for deceased donor transplantation. Most KPIs have demonstrated improved performance over time with limited gains notably in two: the proportion of patients dialysing at home (KPI 3) and timely listing patients for transplantation (KPI 6). KPI implementation has been established in Victoria for 2 years, providing performance data without additional funding. The six Victorian KPIs are measurable, relevant and modifiable, and implementation relies on enthusiasm and goodwill of physicians and nurses involved in collecting data. The KPIs require further evaluation, but adoption of a similar programme by other jurisdictions could lead to improved national outcomes. © 2014 Asian Pacific Society of Nephrology.

Linking performance benchmarking of refinery process chemicals to refinery key performance indicators

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cook, J.M.; Nieman, L.D.

In 1977 Solomon Associates, Inc. issued its first study of refining in the US entitled, Comparative Performance Analysis for Fuel Product Refineries, most commonly referred to as the Solomon Study, or the Fuels Study. In late 1993, both the Water and Waste Water Management, and Petroleum Divisions of Nalco Chemical Company came to the same conclusion; that they must have a better understanding of the Solomon Study process, and have some input to this system of measurement. The authors first approached Solomon Associates with the idea that a specific study should be done of specialty chemicals used in the refinery.more » They felt that this would result in two studies, one for water treatment applications, and one for process. The water treatment study came first, and was completed in 1993 with the United States Petroleum Refineries Water Treatment Performance Analysis for Operating Year 1993. The process study, entitled United States Petroleum Refinery Process Treatment Performance Analysis for Operating Years 1994--95 will be issued in the 2nd quarter of this year by Nalco/Exxon Energy Chemicals, L.P, which includes the combined resources of the former Petroleum Division of Nalco Chemical Company (including the petroleum related portions of most of its overseas companies), and the petroleum related specialty chemical operations of Exxon Chemical on a global basis. What follows is a recap of the process study focus, some examples of output, and comment on both the linkage to key refinery operating indicators, as well as the perception of the effect of such measurement on the supplier relationship of the future.« less

Evaluating stereoscopic displays: both efficiency measures and perceived workload sensitive to manipulations in binocular disparity

NASA Astrophysics Data System (ADS)

van Beurden, Maurice H. P. H.; Ijsselsteijn, Wijnand A.; de Kort, Yvonne A. W.

2011-03-01

Stereoscopic displays are known to offer a number of key advantages in visualizing complex 3D structures or datasets. The large majority of studies that focus on evaluating stereoscopic displays for professional applications use completion time and/or the percentage of correct answers to measure potential performance advantages. However, completion time and accuracy may not fully reflect all the benefits of stereoscopic displays. In this paper, we argue that perceived workload is an additional valuable indicator reflecting the extent to which users can benefit from using stereoscopic displays. We performed an experiment in which participants were asked to perform a visual path-tracing task within a convoluted 3D wireframe structure, varying in level of complexity of the visualised structure and level of disparity of the visualisation. The results showed that an optimal performance (completion time, accuracy and workload), depend both on task difficulty and disparity level. Stereoscopic disparity revealed a faster and more accurate task performance, whereas we observed a trend that performance on difficult tasks stands to benefit more from higher levels of disparity than performance on easy tasks. Perceived workload (as measured using the NASA-TLX) showed a similar response pattern, providing evidence that perceived workload is sensitive to variations in disparity as well as task difficulty. This suggests that perceived workload could be a useful concept, in addition to standard performance indicators, in characterising and measuring human performance advantages when using stereoscopic displays.

Formulation of the age-education index: measuring age and education effects in neuropsychological performance.

PubMed

Lam, Max; Eng, Goi Khia; Rapisarda, Attilio; Subramaniam, Mythily; Kraus, Michael; Keefe, Richard S E; Collinson, Simon Lowes

2013-03-01

The complex interplay of education, age, and cognitive performance on various neuropsychological tests is examined in the current study. New education indices were formulated and further investigated to reveal how age and education variances work together to account for performance on neuropsychological tests. Participants were 830 English-speaking ethnic Chinese. Neuropsychological measures such as Verbal Memory, Digit Sequencing, Token Motor Task, Semantic Fluency, Symbol Coding, Tower of London, Judgment of Line Orientation, and Matrix Reasoning of the Wechsler Adult Intelligence Scale were administered. Education was measured by total years of education and adjusted years of education, as well as ratios of both measures with age. Age and education were associated with neuropsychological performance. Adjusted years of education was associated with fluency and higher cognitive processes, while the ratio between adjusted years of education and age was associated with tasks implicating working memory. Changes in education modalities implicated tasks requiring language abilities. Education and age represent key neurodevelopmental milestones. In light of our findings, special consideration should to be given when neuropsychological assessments are carried out in cross-cultural contexts and in societies where educational systems and pedagogy tend to be complex. PsycINFO Database Record (c) 2013 APA, all rights reserved.

A computerized tutor prototype for prostate cryotherapy: key building blocks and system evaluation

NASA Astrophysics Data System (ADS)

Rabin, Yoed; Shimada, Kenji; Joshi, Purva; Sehrawat, Anjali; Keelan, Robert; Wilfong, Dona M.; McCormick, James T.

2017-02-01

This paper focuses on the evaluation of a prototype for a computer-based tutoring system for prostate cryosurgery, while reviewing its key building blocks and their benchmark performance. The tutoring system lists geometrical constraints of cryoprobe placement, displays a rendered shape of the prostate, simulates cryoprobe insertion, enables distance measurements, simulates the corresponding thermal history, and evaluates the mismatch between the target region shape and a pre-selected planning isotherm. The quality of trainee planning is measured in comparison with a computergenerated plan, created for each case study by a previously developed planning algorithm, known as bubble-packing. While the tutoring level in this study aims only at geometrical constraints on cryoprobe placement and the resulting thermal history, it creates a unique opportunity to gain insight into the process outside of the operation room. System validation of the tutor has been performed by collecting training data from surgical residents, having no prior experience or advanced knowledge of cryotherapy. Furthermore, the system has been evaluated by graduate engineering students having no formal education in medicine. In terms of match between a planning isotherm and the target region shape, results demonstrate medical residents' performance improved from 4.4% in a pretest to 37.8% in a posttest over a course of 50 minutes of training (within 10% margins from a computer-optimized plan). Comparing those results with the performance of engineering students indicates similar results, suggesting that planning of the cryoprobe layout essentially revolves around geometric considerations.

Addressing social aspects associated with wastewater treatment facilities

DOE Office of Scientific and Technical Information (OSTI.GOV)

Padilla-Rivera, Alejandro; Morgan-Sagastume, Juan Manuel; Noyola, Adalberto

In wastewater treatment facilities (WWTF), technical and financial aspects have been considered a priority, while other issues, such as social aspects, have not been evaluated seriously and there is not an accepted methodology for assessing it. In this work, a methodology focused on social concerns related to WWTF is presented. The methodology proposes the use of 25 indicators as a framework for measuring social performance to evaluate the progress in moving towards sustainability. The methodology was applied to test its applicability and effectiveness in two WWTF in Mexico (urban and rural). This evaluation helped define the key elements, stakeholders andmore » barriers in the facilities. In this context, the urban facility showed a better overall performance, a result that may be explained mainly by the better socioeconomic context of the urban municipality. Finally, the evaluation of social aspects using the semi-qualitative approach proposed in this work allows for a comparison between different facilities and for the identification of strengths and weakness, and it provides an alternative tool for achieving and improving wastewater management. - Highlights: • The methodology proposes 25 indicators as a framework for measuring social performance in wastewater treatment facilities. • The evaluation helped to define the key elements, stakeholders and barriers in the wastewater treatment facilities. • The evaluation of social aspects allows the identification of strengths and weakness for improving wastewater management. • It provides a social profile of the facility that highlights the best and worst performances.« less

The Development of Quality Measures for the Performance and Interpretation of Esophageal Manometry

PubMed Central

Yadlapati, Rena; Gawron, Andrew J.; Keswani, Rajesh N.; Bilimoria, Karl; Castell, Donald O.; Dunbar, Kerry B.; Gyawali, Chandra P.; Jobe, Blair A.; Katz, Philip O.; Katzka, David A.; Lacy, Brian E.; Massey, Benson T.; Richter, Joel E.; Schnoll-Sussman, Felice; Spechler, Stuart J.; Tatum, Roger; Vela, Marcelo F.; Pandolfino, John E.

2016-01-01

Background and Aims Esophageal manometry (EM) is the gold standard for the diagnosis of esophageal motility disorders. Variations in the performance and interpretation of EM result in discrepant diagnoses and unnecessary repeated procedures, and may negatively impact patient outcomes. A method to benchmark the procedural quality of EM is needed. The primary aim of this study was to develop quality measures for performing and interpreting EM. Methods The RAND/University of California, Los Angeles Appropriateness Methodology (RAM) was utilized. Fifteen experts in esophageal manometry were invited to be a part of the panel. Potential quality measures were identified through a literature search and interviews with experts. The expert panel ranked the proposed quality measures for appropriateness via a two-round process on the basis of RAM. Results Fourteen experts participated in all processes. A total of 29 measures were considered; 17 of these measures were ranked as appropriate and related to competency (2), pre-procedure (2), procedure (3) and interpretation (10). The latter 10 were integrated into a single composite measure. Thus, 8 final measures were determined to be appropriate quality measures for EM. Five strong recommendations were also endorsed by the experts, however they were not ranked as appropriate quality measures. Conclusions Eight formally validated quality measures for the performance and interpretation of EM were developed on the basis of RAM. These measures represent key aspects of a high-quality EM study and should be uniformly adopted. Evaluation of these measures in clinical practice is needed to assess their impact on outcomes. PMID:26499925

Introducing care pathway commissioning to primary dental care: measuring performance.

PubMed

Harris, R; Bridgman, C; Ahmad, M; Bowes, L; Haley, R; Saleem, S; Singh, R; Taylor, S

2011-12-09

Care pathways have been used in a variety of ways: firstly to support quality improvement through standardising clinical processes, but also for secondary purposes, by purchasers of healthcare, to monitor activity and health outcomes and to commission services. This paper focuses on reporting a secondary use of care pathways: to commission and monitor performance of primary dental care services. Findings of a project involving three dental practices implementing a system based on rating patients according to their risk of disease and need for care are outlined. Data from surgery-based clinical databases and interviews from commissioners and providers are reported. The use of both process and outcome key performance indicators in this context is discussed, as well as issues which arise such as attributability of outcome measures and strategic approaches to improving quality of care.

Quality of Education Predicts Performance on the Wide Range Achievement Test-4th Edition Word Reading Subtest

PubMed Central

Sayegh, Philip; Arentoft, Alyssa; Thaler, Nicholas S.; Dean, Andy C.; Thames, April D.

2014-01-01

The current study examined whether self-rated education quality predicts Wide Range Achievement Test-4th Edition (WRAT-4) Word Reading subtest and neurocognitive performance, and aimed to establish this subtest's construct validity as an educational quality measure. In a community-based adult sample (N = 106), we tested whether education quality both increased the prediction of Word Reading scores beyond demographic variables and predicted global neurocognitive functioning after adjusting for WRAT-4. As expected, race/ethnicity and education predicted WRAT-4 reading performance. Hierarchical regression revealed that when including education quality, the amount of WRAT-4's explained variance increased significantly, with race/ethnicity and both education quality and years as significant predictors. Finally, WRAT-4 scores, but not education quality, predicted neurocognitive performance. Results support WRAT-4 Word Reading as a valid proxy measure for education quality and a key predictor of neurocognitive performance. Future research should examine these findings in larger, more diverse samples to determine their robust nature. PMID:25404004

Experimental demonstration of polarization encoding quantum key distribution system based on intrinsically stable polarization-modulated units.

PubMed

Wang, Jindong; Qin, Xiaojuan; Jiang, Yinzhu; Wang, Xiaojing; Chen, Liwei; Zhao, Feng; Wei, Zhengjun; Zhang, Zhiming

2016-04-18

A proof-of-principle demonstration of a one-way polarization encoding quantum key distribution (QKD) system is demonstrated. This approach can automatically compensate for birefringence and phase drift. This is achieved by constructing intrinsically stable polarization-modulated units (PMUs) to perform the encoding and decoding, which can be used with four-state protocol, six-state protocol, and the measurement-device-independent (MDI) scheme. A polarization extinction ratio of about 30 dB was maintained for several hours over a 50 km optical fiber without any adjustments to our setup, which evidences its potential for use in practical applications.

Automatization of hardware configuration for plasma diagnostic system

NASA Astrophysics Data System (ADS)

Wojenski, A.; Pozniak, K. T.; Kasprowicz, G.; Kolasinski, P.; Krawczyk, R. D.; Zabolotny, W.; Linczuk, P.; Chernyshova, M.; Czarski, T.; Malinowski, K.

2016-09-01

Soft X-ray plasma measurement systems are mostly multi-channel, high performance systems. In case of the modular construction it is necessary to perform sophisticated system discovery in parallel with automatic system configuration. In the paper the structure of the modular system designed for tokamak plasma soft X-ray measurements is described. The concept of the system discovery and further automatic configuration is also presented. FCS application (FMC/ FPGA Configuration Software) is used for running sophisticated system setup with automatic verification of proper configuration. In order to provide flexibility of further system configurations (e.g. user setup), common communication interface is also described. The approach presented here is related to the automatic system firmware building presented in previous papers. Modular construction and multichannel measurements are key requirement in term of SXR diagnostics with use of GEM detectors.

Guiding principles and checklist for population-based quality metrics.

PubMed

Krishnan, Mahesh; Brunelli, Steven M; Maddux, Franklin W; Parker, Thomas F; Johnson, Douglas; Nissenson, Allen R; Collins, Allan; Lacson, Eduardo

2014-06-06

The Centers for Medicare and Medicaid Services oversees the ESRD Quality Incentive Program to ensure that the highest quality of health care is provided by outpatient dialysis facilities that treat patients with ESRD. To that end, Centers for Medicare and Medicaid Services uses clinical performance measures to evaluate quality of care under a pay-for-performance or value-based purchasing model. Now more than ever, the ESRD therapeutic area serves as the vanguard of health care delivery. By translating medical evidence into clinical performance measures, the ESRD Prospective Payment System became the first disease-specific sector using the pay-for-performance model. A major challenge for the creation and implementation of clinical performance measures is the adjustments that are necessary to transition from taking care of individual patients to managing the care of patient populations. The National Quality Forum and others have developed effective and appropriate population-based clinical performance measures quality metrics that can be aggregated at the physician, hospital, dialysis facility, nursing home, or surgery center level. Clinical performance measures considered for endorsement by the National Quality Forum are evaluated using five key criteria: evidence, performance gap, and priority (impact); reliability; validity; feasibility; and usability and use. We have developed a checklist of special considerations for clinical performance measure development according to these National Quality Forum criteria. Although the checklist is focused on ESRD, it could also have broad application to chronic disease states, where health care delivery organizations seek to enhance quality, safety, and efficiency of their services. Clinical performance measures are likely to become the norm for tracking performance for health care insurers. Thus, it is critical that the methodologies used to develop such metrics serve the payer and the provider and most importantly, reflect what represents the best care to improve patient outcomes. Copyright © 2014 by the American Society of Nephrology.

The European Society of Gastrointestinal Endoscopy Quality Improvement Initiative: developing performance measures.

PubMed

Rutter, Matthew D; Senore, Carlo; Bisschops, Raf; Domagk, Dirk; Valori, Roland; Kaminski, Michal F; Spada, Cristiano; Bretthauer, Michael; Bennett, Cathy; Bellisario, Cristina; Minozzi, Silvia; Hassan, Cesare; Rees, Colin; Dinis-Ribeiro, Mário; Hucl, Tomas; Ponchon, Thierry; Aabakken, Lars; Fockens, Paul

2016-01-01

The European Society of Gastrointestinal Endoscopy (ESGE) and United European Gastroenterology (UEG) have a vision to create a thriving community of endoscopy services across Europe, collaborating with each other to provide high quality, safe, accurate, patient-centered and accessible endoscopic care. Whilst the boundaries of what can be achieved by advanced endoscopy are continually expanding, we believe that one of the most fundamental steps to achieving our goal is to raise the quality of everyday endoscopy. The development of robust, consensus- and evidence-based key performance measures is the first step in this vision.ESGE and UEG have identified quality of endoscopy as a major priority. This paper explains the rationale behind the ESGE Quality Improvement Initiative and describes the processes that were followed. We recommend that all units develop mechanisms for audit and feedback of endoscopist and service performance using the ESGE performance measures that will be published in future issues of this journal over the next year. We urge all endoscopists and endoscopy services to prioritize quality and to ensure that these performance measures are implemented and monitored at a local level, so that we can provide the highest possible care for our patients. © Georg Thieme Verlag KG Stuttgart · New York.

Assessing the influence of reactor system design criteria on the performance of model colon fermentation units.

PubMed

Moorthy, Arun S; Eberl, Hermann J

2014-04-01

Fermentation reactor systems are a key platform in studying intestinal microflora, specifically with respect to questions surrounding the effects of diet. In this study, we develop computational representations of colon fermentation reactor systems as a way to assess the influence of three design elements (number of reactors, emptying mechanism, and inclusion of microbial immobilization) on three performance measures (total biomass density, biomass composition, and fibre digestion efficiency) using a fractional-factorial experimental design. It was determined that the choice of emptying mechanism showed no effect on any of the performance measures. Additionally, it was determined that none of the design criteria had any measurable effect on reactor performance with respect to biomass composition. It is recommended that model fermentation systems used in the experimenting of dietary effects on intestinal biomass composition be streamlined to only include necessary system design complexities, as the measured performance is not benefited by the addition of microbial immobilization mechanisms or semi-continuous emptying scheme. Additionally, the added complexities significantly increase computational time during simulation experiments. It was also noted that the same factorial experiment could be directly adapted using in vitro colon fermentation systems. Copyright © 2013 The Society for Biotechnology, Japan. Published by Elsevier B.V. All rights reserved.

Introducing a Short Measure of Shared Servant Leadership Impacting Team Performance through Team Behavioral Integration

PubMed Central

Sousa, Milton; Van Dierendonck, Dirk

2016-01-01

The research reported in this paper was designed to study the influence of shared servant leadership on team performance through the mediating effect of team behavioral integration, while validating a new short measure of shared servant leadership. A round-robin approach was used to collect data in two similar studies. Study 1 included 244 undergraduate students in 61 teams following an intense HRM business simulation of 2 weeks. The following year, study 2 included 288 students in 72 teams involved in the same simulation. The most important findings were that (1) shared servant leadership was a strong determinant of team behavioral integration, (2) information exchange worked as the main mediating process between shared servant leadership and team performance, and (3) the essence of servant leadership can be captured on the key dimensions of empowerment, humility, stewardship and accountability, allowing for a new promising shortened four-dimensional measure of shared servant leadership. PMID:26779104

Study of ultrasonic thermometry based on ultrasonic time-of-flight measurement

NASA Astrophysics Data System (ADS)

Jia, Ruixi; Xiong, Qingyu; Wang, Lijie; Wang, Kai; Shen, Xuehua; Liang, Shan; Shi, Xin

2016-03-01

Ultrasonic thermometry is a kind of acoustic pyrometry and it has been evolving as a new temperature measurement technology for various environment. However, the accurate measurement of the ultrasonic time-of-flight is the key for ultrasonic thermometry. In this paper, we study the ultrasonic thermometry technique based on ultrasonic time-of-flight measurement with a pair of ultrasonic transducers for transmitting and receiving signal. The ultrasonic transducers are installed in a single path which ultrasonic travels. In order to validate the performance of ultrasonic thermometry, we make a contrast about the absolute error between the measured temperature value and the practical one. With and without heater source, the experimental results indicate ultrasonic thermometry has high precision of temperature measurement.

Stereotype Threat and College Academic Performance: A Latent Variables Approach*

PubMed Central

Owens, Jayanti; Massey, Douglas S.

2013-01-01

Stereotype threat theory has gained experimental and survey-based support in helping explain the academic underperformance of minority students at selective colleges and universities. Stereotype threat theory states that minority students underperform because of pressures created by negative stereotypes about their racial group. Past survey-based studies, however, are characterized by methodological inefficiencies and potential biases: key theoretical constructs have only been measured using summed indicators and predicted relationships modeled using ordinary least squares. Using the National Longitudinal Survey of Freshman, this study overcomes previous methodological shortcomings by developing a latent construct model of stereotype threat. Theoretical constructs and equations are estimated simultaneously from multiple indicators, yielding a more reliable, valid, and parsimonious test of key propositions. Findings additionally support the view that social stigma can indeed have strong negative effects on the academic performance of pejoratively stereotyped racial-minority group members, not only in laboratory settings, but also in the real world. PMID:23950616

DMSK: A practical 2400-bps receiver for the mobile satellite service: An MSAT-X Report

NASA Technical Reports Server (NTRS)

Davarian, F.; Simon, M. K.; Sumida, J.

1985-01-01

The partical aspects of a 2400-bps differential detection minimum-shift-keying (DMSK) receiver are investigated. Fundamental issues relating to hardware precision, Doppler shift, fading, and frequency offset are examined, and it is concluded that the receiver's implementation at baseband is more advantageous both in cost and simplicity than its IF implementation. The DMSK receiver has been fabricated and tested under simulated mobile satellite environment conditions. The measured receiver performance in the presence of anomalies pertinent to the link is presented in this report. Furthermore, the receiver behavior in a band-limited channel (GMSK) is also investigated. The DMSK receiver performs substantially better than a coherent minimum-shift-keying (MSK) receiver in a heavily fading environment. The DMSK radio is simple and robust, and results in a lower error floor than its coherent counterpart. Moreover, this receiver is suitable for burst-type signals, and its recovery from deep fades is fast.

Financial gains and risks in pay-for-performance bonus algorithms.

PubMed

Cromwell, Jerry; Drozd, Edward M; Smith, Kevin; Trisolini, Michael

2007-01-01

Considerable attention has been given to evidence-based process indicators associated with quality of care, while much less attention has been given to the structure and key parameters of the various pay-for-performance (P4P) bonus and penalty arrangements using such measures. In this article we develop a general model of quality payment arrangements and discuss the advantages and disadvantages of the key parameters. We then conduct simulation analyses of four general P4P payment algorithms by varying seven parameters, including indicator weights, indicator intercorrelation, degree of uncertainty regarding intervention effectiveness, and initial baseline rates. Bonuses averaged over several indicators appear insensitive to weighting, correlation, and the number of indicators. The bonuses are sensitive to disease manager perceptions of intervention effectiveness, facing challenging targets, and the use of actual-to-target quality levels versus rates of improvement over baseline.

Health-care process improvement decisions: a systems perspective.

PubMed

Walley, Paul; Silvester, Kate; Mountford, Shaun

2006-01-01

The paper seeks to investigate decision-making processes within hospital improvement activity, to understand how performance measurement systems influence decisions and potentially lead to unsuccessful or unsustainable process changes. A longitudinal study over a 33-month period investigates key events, decisions and outcomes at one medium-sized hospital in the UK. Process improvement events are monitored using process control methods and by direct observation. The authors took a systems perspective of the health-care processes, ensuring that the impacts of decisions across the health-care supply chain were appropriately interpreted. The research uncovers the ways in which measurement systems disguise failed decisions and encourage managers to take a low-risk approach of "symptomatic relief" when trying to improve performance metrics. This prevents many managers from trying higher risk, sustainable process improvement changes. The behaviour of the health-care system is not understood by many managers and this leads to poor analysis of problem situations. Measurement using time-series methodologies, such as statistical process control are vital for a better understanding of the systems impact of changes. Senior managers must also be aware of the behavioural influence of similar performance measurement systems that discourage sustainable improvement. There is a risk that such experiences will tarnish the reputation of performance management as a discipline. Recommends process control measures as a way of creating an organization memory of how decisions affect performance--something that is currently lacking.

On the security of compressed encryption with partial unitary sensing matrices embedding a secret keystream

NASA Astrophysics Data System (ADS)

Yu, Nam Yul

2017-12-01

The principle of compressed sensing (CS) can be applied in a cryptosystem by providing the notion of security. In this paper, we study the computational security of a CS-based cryptosystem that encrypts a plaintext with a partial unitary sensing matrix embedding a secret keystream. The keystream is obtained by a keystream generator of stream ciphers, where the initial seed becomes the secret key of the CS-based cryptosystem. For security analysis, the total variation distance, bounded by the relative entropy and the Hellinger distance, is examined as a security measure for the indistinguishability. By developing upper bounds on the distance measures, we show that the CS-based cryptosystem can be computationally secure in terms of the indistinguishability, as long as the keystream length for each encryption is sufficiently large with low compression and sparsity ratios. In addition, we consider a potential chosen plaintext attack (CPA) from an adversary, which attempts to recover the key of the CS-based cryptosystem. Associated with the key recovery attack, we show that the computational security of our CS-based cryptosystem is brought by the mathematical intractability of a constrained integer least-squares (ILS) problem. For a sub-optimal, but feasible key recovery attack, we consider a successive approximate maximum-likelihood detection (SAMD) and investigate the performance by developing an upper bound on the success probability. Through theoretical and numerical analyses, we demonstrate that our CS-based cryptosystem can be secure against the key recovery attack through the SAMD.

Effects of ocean thermocline variability on noncoherent underwater acoustic communications.

PubMed

Siderius, Martin; Porter, Michael B; Hursky, Paul; McDonald, Vincent

2007-04-01

The performance of acoustic modems in the ocean is strongly affected by the ocean environment. A storm can drive up the ambient noise levels, eliminate a thermocline by wind mixing, and whip up violent waves and thereby break up the acoustic mirror formed by the ocean surface. The combined effects of these and other processes on modem performance are not well understood. The authors have been conducting experiments to study these environmental effects on various modulation schemes. Here the focus is on the role of the thermocline on a widely used modulation scheme (frequency-shift keying). Using data from a recent experiment conducted in 100-m-deep water off the coast of Kauai, HI, frequency-shift-key modulation performance is shown to be strongly affected by diurnal cycles in the thermocline. There is dramatic variation in performance (measured by bit error rates) between receivers in the surface duct and receivers in the thermocline. To interpret the performance variations in a quantitative way, a precise metric is introduced based on a signal-to-interference-noise ratio that encompasses both the ambient noise and intersymbol interference. Further, it will be shown that differences in the fading statistics for receivers in and out of the thermocline explain the differences in modem performance.

The experimental study of heat transfer around molds inside a model autoclave

NASA Astrophysics Data System (ADS)

Ghamlouch, Taleb; Roux, Stéphane; Lefèvre, Nicolas; Bailleul, Jean-Luc; Sobotka, Vincent

2018-05-01

The temperature distribution within composite parts manufactured inside autoclaves plays a key role in determining the parts quality at the end of the curing cycle. Indeed, heat transfer between the parts and the surroundings inside an autoclave is strongly coupled with the flow field around the molds and can be modeled through the convective heat transfer coefficient (HTC). The aerodynamically unsuitable geometry of the molds generates complex turbulent non-uniform flows around them accompanied with the presence of dead zones. This heterogeneity can imply non-uniform convective heat transfers leading to temperature gradients inside parts that can be prejudicial. Given this fact, the purpose of this study is to perform experimental measurements in order to describe the flow field and the convective heat transfer behavior around representative industrial molds installed inside a home-made model. A key point of our model autoclave is the ease of use of non-intrusive measuring instruments: the Particle Image Velocimetry (PIV) technique and infrared imaging camera for the study of the flow field and the heat transfer coefficient distribution around the molds respectively. The experimental measurements are then compared to computational fluid dynamics (CFD) calculations performed on the computer code ANSYS Fluent 16.0®. This investigation has revealed, as expected, a non-uniform distribution of the convective heat transfer coefficient around the molds and therefore the presence of thermal gradients which can reduce the composite parts quality during an autoclave process. A good agreement has been achieved between the experimental and the numerical results leading then to the validation of the performed numerical simulations.

Elementary School Students' Science Talk Ability in Inquiry-Oriented Settings in Taiwan: Test Development, Verification, and Performance Benchmarks

ERIC Educational Resources Information Center

Lin, Sheau-Wen; Liu, Yu; Chen, Shin-Feng; Wang, Jing-Ru; Kao, Huey-Lien

2016-01-01

The purpose of this study was to develop a computer-based measure of elementary students' science talk and to report students' benchmarks. The development procedure had three steps: defining the framework of the test, collecting and identifying key reference sets of science talk, and developing and verifying the science talk instrument. The…

Motivation, Satisfaction, and Morale in Army Careers: A Review of Theory and Measurement

DTIC Science & Technology

1976-12-01

subjective goali on performance. Their model of "task motivation" has the following key features (Locke, Cartledge, & Knerr, 1968, p. 135): I. The... pulling himself up in the world and should work hard with the hope of being promoted to a higher level job. "* A man should choose the Job which pays the

Competency-Based Degree Programs in the U.S.: Postsecondary Credentials for Measurable Student Learning and Performance

ERIC Educational Resources Information Center

Klein-Collins, Rebecca

2012-01-01

Today the U.S. higher education system is facing a crisis regarding its perceived quality. One model for improving quality is competency-based education, in which an institution clearly defines the specific competencies expected of its graduates. A key challenge is how to help more people, particularly adults, succeed at the post¬secondary level…

Left Inferior Frontal Cortex and Syntax: Function, Structure and Behaviour in Patients with Left Hemisphere Damage

ERIC Educational Resources Information Center

Tyler, Lorraine K.; Marslen-Wilson, William D.; Randall, Billi; Wright, Paul; Devereux, Barry J.; Zhuang, Jie; Papoutsi, Marina; Stamatakis, Emmanuel A.

2011-01-01

For the past 150 years, neurobiological models of language have debated the role of key brain regions in language function. One consistently debated set of issues concern the role of the left inferior frontal gyrus in syntactic processing. Here we combine measures of functional activity, grey matter integrity and performance in patients with left…

Toward the Development of a Program Quality Framework for Career and Technical Education Programs: A Researcher-Practitioner Collaborative Project

ERIC Educational Resources Information Center

Brodersen, R. Marc; Yanoski, David; Hyslop, Alisha; Imperatore, Catherine

2016-01-01

Career and technical education (CTE) programs of study are subject to rigorous state and federal accountability systems that provide information on key student outcomes. However, while these outcome measures can form a basis for identifying high- and low-performing programs, they are insufficient for answering underlying questions about how or why…

Corrosion rates of fasteners in treated wood exposed to 100% relative humidity

Treesearch

Samuel L. Zelinka; Douglas R. Rammer

2009-01-01

In the past, gravimetric corrosion data for fasteners exposed to treated wood has been reported as a percent weight loss. Although percent weight loss is a valid measure of corrosion for comparing identical fasteners, it can distort the corrosion performance of fasteners with different geometries and densities. This report reevaluates a key report on the corrosiveness...

Development of a smart timber bridge - a five-year plan

Treesearch

Brent M. Phares; Terry J. Wipf; Ursula Deza; James P. Wacker

2011-01-01

This paper outlines a 5-year research plan for the development of a structural health monitoring system for timber bridges. A series of studies identify and evaluate various sensing technologies for measurement of structural adequacy and/or deterioration parameters. The overall goal is to develop a turn-key system to analyze, monitor, and report on the performance and...

Assessing the Effectiveness of Learning Opportunities: Improving Course Availability through Demand Balancing

ERIC Educational Resources Information Center

Rizvi, Syed A.; Jacobsen, Tanja E.

2017-01-01

Four-year graduation rates have become a key performance measure for the institutions of higher education. However, with less than 30% of the first-time freshmen being able to graduate in four years from a four-year program suggests an investigation of the factors that affect a timely progress of students through their course of study. Many would…

Taking up the Challenge of Evidencing Value in Educational Development: From Theory to Practice

ERIC Educational Resources Information Center

Bamber, Veronica; Stefani, Lorraine

2016-01-01

Measurable targets, key performance indicators, value for money--whatever we may think of the "impact agenda," it looks like it is here to stay. Are we trapped in a positivist, new managerialist spiral of demonstrating the value of our work, or can we take the lead in reframing the discourse on how educational development proves its…

Primary Health Care as a Foundation for Strengthening Health Systems in Low- and Middle-Income Countries.

PubMed

Bitton, Asaf; Ratcliffe, Hannah L; Veillard, Jeremy H; Kress, Daniel H; Barkley, Shannon; Kimball, Meredith; Secci, Federica; Wong, Ethan; Basu, Lopa; Taylor, Chelsea; Bayona, Jaime; Wang, Hong; Lagomarsino, Gina; Hirschhorn, Lisa R

2017-05-01

Primary health care (PHC) has been recognized as a core component of effective health systems since the early part of the twentieth century. However, despite notable progress, there remains a large gap between what individuals and communities need, and the quality and effectiveness of care delivered. The Primary Health Care Performance Initiative (PHCPI) was established by an international consortium to catalyze improvements in PHC delivery and outcomes in low- and middle-income countries through better measurement and sharing of effective models and practices. PHCPI has developed a framework to illustrate the relationship between key financing, workforce, and supply inputs, and core primary health care functions of first-contact accessibility, comprehensiveness, coordination, continuity, and person-centeredness. The framework provides guidance for more effective assessment of current strengths and gaps in PHC delivery through a core set of 25 key indicators ("Vital Signs"). Emerging best practices that foster high-performing PHC system development are being codified and shared around low- and high-income countries. These measurement and improvement approaches provide countries and implementers with tools to assess the current state of their PHC delivery system and to identify where cross-country learning can accelerate improvements in PHC quality and effectiveness.

Superlinear threshold detectors in quantum cryptography

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lydersen, Lars; Maroey, Oystein; Skaar, Johannes

2011-09-15

We introduce the concept of a superlinear threshold detector, a detector that has a higher probability to detect multiple photons if it receives them simultaneously rather than at separate times. Highly superlinear threshold detectors in quantum key distribution systems allow eavesdropping the full secret key without being revealed. Here, we generalize the detector control attack, and analyze how it performs against quantum key distribution systems with moderately superlinear detectors. We quantify the superlinearity in superconducting single-photon detectors based on earlier published data, and gated avalanche photodiode detectors based on our own measurements. The analysis shows that quantum key distribution systemsmore » using detector(s) of either type can be vulnerable to eavesdropping. The avalanche photodiode detector becomes superlinear toward the end of the gate. For systems expecting substantial loss, or for systems not monitoring loss, this would allow eavesdropping using trigger pulses containing less than 120 photons per pulse. Such an attack would be virtually impossible to catch with an optical power meter at the receiver entrance.« less

Development and validation of a virtual reality simulator: human factors input to interventional radiology training.

PubMed

Johnson, Sheena Joanne; Guediri, Sara M; Kilkenny, Caroline; Clough, Peter J

2011-12-01

This study developed and validated a virtual reality (VR) simulator for use by interventional radiologists. Research in the area of skill acquisition reports practice as essential to become a task expert. Studies on simulation show skills learned in VR can be successfully transferred to a real-world task. Recently, with improvements in technology, VR simulators have been developed to allow complex medical procedures to be practiced without risking the patient. Three studies are reported. In Study I, 35 consultant interventional radiologists took part in a cognitive task analysis to empirically establish the key competencies of the Seldinger procedure. In Study 2, 62 participants performed one simulated procedure, and their performance was compared by expertise. In Study 3, the transferability of simulator training to a real-world procedure was assessed with 14 trainees. Study I produced 23 key competencies that were implemented as performance measures in the simulator. Study 2 showed the simulator had both face and construct validity, although some issues were identified. Study 3 showed the group that had undergone simulator training received significantly higher mean performance ratings on a subsequent patient procedure. The findings of this study support the centrality of validation in the successful design of simulators and show the utility of simulators as a training device. The studies show the key elements of a validation program for a simulator. In addition to task analysis and face and construct validities, the authors highlight the importance of transfer of training in validation studies.

Relay discovery and selection for large-scale P2P streaming

PubMed Central

Zhang, Chengwei; Wang, Angela Yunxian

2017-01-01

In peer-to-peer networks, application relays have been commonly used to provide various networking services. The service performance often improves significantly if a relay is selected appropriately based on its network location. In this paper, we studied the location-aware relay discovery and selection problem for large-scale P2P streaming networks. In these large-scale and dynamic overlays, it incurs significant communication and computation cost to discover a sufficiently large relay candidate set and further to select one relay with good performance. The network location can be measured directly or indirectly with the tradeoffs between timeliness, overhead and accuracy. Based on a measurement study and the associated error analysis, we demonstrate that indirect measurements, such as King and Internet Coordinate Systems (ICS), can only achieve a coarse estimation of peers’ network location and those methods based on pure indirect measurements cannot lead to a good relay selection. We also demonstrate that there exists significant error amplification of the commonly used “best-out-of-K” selection methodology using three RTT data sets publicly available. We propose a two-phase approach to achieve efficient relay discovery and accurate relay selection. Indirect measurements are used to narrow down a small number of high-quality relay candidates and the final relay selection is refined based on direct probing. This two-phase approach enjoys an efficient implementation using the Distributed-Hash-Table (DHT). When the DHT is constructed, the node keys carry the location information and they are generated scalably using indirect measurements, such as the ICS coordinates. The relay discovery is achieved efficiently utilizing the DHT-based search. We evaluated various aspects of this DHT-based approach, including the DHT indexing procedure, key generation under peer churn and message costs. PMID:28410384

Relay discovery and selection for large-scale P2P streaming.

PubMed

Zhang, Chengwei; Wang, Angela Yunxian; Hei, Xiaojun

2017-01-01

In peer-to-peer networks, application relays have been commonly used to provide various networking services. The service performance often improves significantly if a relay is selected appropriately based on its network location. In this paper, we studied the location-aware relay discovery and selection problem for large-scale P2P streaming networks. In these large-scale and dynamic overlays, it incurs significant communication and computation cost to discover a sufficiently large relay candidate set and further to select one relay with good performance. The network location can be measured directly or indirectly with the tradeoffs between timeliness, overhead and accuracy. Based on a measurement study and the associated error analysis, we demonstrate that indirect measurements, such as King and Internet Coordinate Systems (ICS), can only achieve a coarse estimation of peers' network location and those methods based on pure indirect measurements cannot lead to a good relay selection. We also demonstrate that there exists significant error amplification of the commonly used "best-out-of-K" selection methodology using three RTT data sets publicly available. We propose a two-phase approach to achieve efficient relay discovery and accurate relay selection. Indirect measurements are used to narrow down a small number of high-quality relay candidates and the final relay selection is refined based on direct probing. This two-phase approach enjoys an efficient implementation using the Distributed-Hash-Table (DHT). When the DHT is constructed, the node keys carry the location information and they are generated scalably using indirect measurements, such as the ICS coordinates. The relay discovery is achieved efficiently utilizing the DHT-based search. We evaluated various aspects of this DHT-based approach, including the DHT indexing procedure, key generation under peer churn and message costs.

Improving benchmarking by using an explicit framework for the development of composite indicators: an example using pediatric quality of care

PubMed Central

2010-01-01

Background The measurement of healthcare provider performance is becoming more widespread. Physicians have been guarded about performance measurement, in part because the methodology for comparative measurement of care quality is underdeveloped. Comprehensive quality improvement will require comprehensive measurement, implying the aggregation of multiple quality metrics into composite indicators. Objective To present a conceptual framework to develop comprehensive, robust, and transparent composite indicators of pediatric care quality, and to highlight aspects specific to quality measurement in children. Methods We reviewed the scientific literature on composite indicator development, health systems, and quality measurement in the pediatric healthcare setting. Frameworks were selected for explicitness and applicability to a hospital-based measurement system. Results We synthesized various frameworks into a comprehensive model for the development of composite indicators of quality of care. Among its key premises, the model proposes identifying structural, process, and outcome metrics for each of the Institute of Medicine's six domains of quality (safety, effectiveness, efficiency, patient-centeredness, timeliness, and equity) and presents a step-by-step framework for embedding the quality of care measurement model into composite indicator development. Conclusions The framework presented offers researchers an explicit path to composite indicator development. Without a scientifically robust and comprehensive approach to measurement of the quality of healthcare, performance measurement will ultimately fail to achieve its quality improvement goals. PMID:20181129

Polarized training has greater impact on key endurance variables than threshold, high intensity, or high volume training

PubMed Central

Stöggl, Thomas; Sperlich, Billy

2014-01-01

Endurance athletes integrate four conditioning concepts in their training programs: high-volume training (HVT), “threshold-training” (THR), high-intensity interval training (HIIT) and a combination of these aforementioned concepts known as polarized training (POL). The purpose of this study was to explore which of these four training concepts provides the greatest response on key components of endurance performance in well-trained endurance athletes. Methods: Forty eight runners, cyclists, triathletes, and cross-country skiers (peak oxygen uptake: (VO2peak): 62.6 ± 7.1 mL·min−1·kg−1) were randomly assigned to one of four groups performing over 9 weeks. An incremental test, work economy and a VO2peak tests were performed. Training intensity was heart rate controlled. Results: POL demonstrated the greatest increase in VO2peak (+6.8 ml·min·kg−1 or 11.7%, P < 0.001), time to exhaustion during the ramp protocol (+17.4%, P < 0.001) and peak velocity/power (+5.1%, P < 0.01). Velocity/power at 4 mmol·L−1 increased after POL (+8.1%, P < 0.01) and HIIT (+5.6%, P < 0.05). No differences in pre- to post-changes of work economy were found between the groups. Body mass was reduced by 3.7% (P < 0.001) following HIIT, with no changes in the other groups. With the exception of slight improvements in work economy in THR, both HVT and THR had no further effects on measured variables of endurance performance (P > 0.05). Conclusion: POL resulted in the greatest improvements in most key variables of endurance performance in well-trained endurance athletes. THR or HVT did not lead to further improvements in performance related variables. PMID:24550842

Prediction of HDR quality by combining perceptually transformed display measurements with machine learning

NASA Astrophysics Data System (ADS)

Choudhury, Anustup; Farrell, Suzanne; Atkins, Robin; Daly, Scott

2017-09-01

We present an approach to predict overall HDR display quality as a function of key HDR display parameters. We first performed subjective experiments on a high quality HDR display that explored five key HDR display parameters: maximum luminance, minimum luminance, color gamut, bit-depth and local contrast. Subjects rated overall quality for different combinations of these display parameters. We explored two models | a physical model solely based on physically measured display characteristics and a perceptual model that transforms physical parameters using human vision system models. For the perceptual model, we use a family of metrics based on a recently published color volume model (ICT-CP), which consists of the PQ luminance non-linearity (ST2084) and LMS-based opponent color, as well as an estimate of the display point spread function. To predict overall visual quality, we apply linear regression and machine learning techniques such as Multilayer Perceptron, RBF and SVM networks. We use RMSE and Pearson/Spearman correlation coefficients to quantify performance. We found that the perceptual model is better at predicting subjective quality than the physical model and that SVM is better at prediction than linear regression. The significance and contribution of each display parameter was investigated. In addition, we found that combined parameters such as contrast do not improve prediction. Traditional perceptual models were also evaluated and we found that models based on the PQ non-linearity performed better.

Performance-Based Empathy Mediates the Influence of Working Memory on Social Competence in Schizophrenia

PubMed Central

Smith, Matthew J.; Horan, William P.; Cobia, Derin J.; Karpouzian, Tatiana M.; Fox, Jaclyn M.; Reilly, James L.; Breiter, Hans C.

2014-01-01

Empathic deficits have been linked to poor functioning in schizophrenia, but this work is mostly limited to self-report data. This study examined whether performance-based empathy measures account for incremental variance in social competence and social attainment above and beyond self-reported empathy, neurocognition, and clinical symptoms. Given the importance of working memory in theoretical models of empathy and in the prediction of functioning in schizophrenia, we also examined whether empathy mediates the relationship between working memory and functioning. Sixty outpatients and 45 healthy controls were compared on performance-based measures of 3 key components of empathic responding, including facial affect perception, emotional empathy (affective responsiveness), and cognitive empathy (emotional perspective-taking). Participants also completed measures of self-reported empathy, neurocognition, clinical symptoms, and social competence and attainment. Patients demonstrated lower accuracy than controls across the 3 performance-based empathy measures. Among patients, these measures showed minimal relations to self-reported empathy but significantly correlated with working memory and other neurocognitive functions as well as symptom levels. Furthermore, cognitive empathy explained significant incremental variance in social competence (∆R 2 = .07, P < .05) and was found to mediate the relation between working memory and social competence. Performance-based measures of empathy were sensitive to functionally relevant disturbances in schizophrenia. Working memory deficits appear to have an important effect on these disruptions in empathy. Empathy is emerging as a promising new area for social cognitive research and for novel recovery-oriented treatment development. PMID:23770935

Measurements, modeling, control and simulation - as applied to the human left ventricle for purposeful physiological monitoring.

NASA Technical Reports Server (NTRS)

Ghista, D. N.; Rasmussen, D. N.; Linebarger, R. N.; Sandler, H.

1971-01-01

Interdisciplinary engineering research effort in studying the intact human left ventricle has been employed to physiologically monitor the heart and to obtain its 'state-of-health' characteristics. The left ventricle was selected for this purpose because it plays a key role in supplying energy to the body cells. The techniques for measurement of the left ventricular geometry are described; the geometry is effectively displayed to bring out the abnormalities in cardiac function. Methods of mathematical modeling, which make it possible to determine the performance of the intact left ventricular muscle, are also described. Finally, features of a control system for the left ventricle for predicting the effect of certain physiological stress situations on the ventricle performance are discussed.

Lightweight dew-/frost-point hygrometer based on a surface-acoustic-wave sensor for balloon-borne atmospheric water vapor profile sounding

NASA Astrophysics Data System (ADS)

Hansford, Graeme M.; Freshwater, Ray A.; Eden, Louise; Turnbull, Katharine F. V.; Hadaway, David E.; Ostanin, Victor P.; Jones, Roderic L.

2006-01-01

The design of a very lightweight dew-/frost-point hygrometer for balloon-borne atmospheric water vapor profiling is described. The instrument is based on a surface-acoustic-wave sensor. The low instrument weight is a key feature, allowing flights on meteorological balloons which brings many more flight opportunities. The hygrometer shows consistently good performance in the troposphere and while water vapor measurements near the tropopause and in the stratosphere are possible with the current instrument, the long-time response in these regions hampers realistic measurements. The excellent intrinsic sensitivity of the surface-acoustic-wave sensor should permit considerable improvement in the hygrometer performance in the very dry regions of the atmosphere.

SPOKES: An end-to-end simulation facility for spectroscopic cosmological surveys

DOE PAGES

Nord, B.; Amara, A.; Refregier, A.; ...

2016-03-03

The nature of dark matter, dark energy and large-scale gravity pose some of the most pressing questions in cosmology today. These fundamental questions require highly precise measurements, and a number of wide-field spectroscopic survey instruments are being designed to meet this requirement. A key component in these experiments is the development of a simulation tool to forecast science performance, define requirement flow-downs, optimize implementation, demonstrate feasibility, and prepare for exploitation. We present SPOKES (SPectrOscopic KEn Simulation), an end-to-end simulation facility for spectroscopic cosmological surveys designed to address this challenge. SPOKES is based on an integrated infrastructure, modular function organization, coherentmore » data handling and fast data access. These key features allow reproducibility of pipeline runs, enable ease of use and provide flexibility to update functions within the pipeline. The cyclic nature of the pipeline offers the possibility to make the science output an efficient measure for design optimization and feasibility testing. We present the architecture, first science, and computational performance results of the simulation pipeline. The framework is general, but for the benchmark tests, we use the Dark Energy Spectrometer (DESpec), one of the early concepts for the upcoming project, the Dark Energy Spectroscopic Instrument (DESI). As a result, we discuss how the SPOKES framework enables a rigorous process to optimize and exploit spectroscopic survey experiments in order to derive high-precision cosmological measurements optimally.« less

DOE Office of Scientific and Technical Information (OSTI.GOV)

Nord, B.; Amara, A.; Refregier, A.

The nature of dark matter, dark energy and large-scale gravity pose some of the most pressing questions in cosmology today. These fundamental questions require highly precise measurements, and a number of wide-field spectroscopic survey instruments are being designed to meet this requirement. A key component in these experiments is the development of a simulation tool to forecast science performance, define requirement flow-downs, optimize implementation, demonstrate feasibility, and prepare for exploitation. We present SPOKES (SPectrOscopic KEn Simulation), an end-to-end simulation facility for spectroscopic cosmological surveys designed to address this challenge. SPOKES is based on an integrated infrastructure, modular function organization, coherentmore » data handling and fast data access. These key features allow reproducibility of pipeline runs, enable ease of use and provide flexibility to update functions within the pipeline. The cyclic nature of the pipeline offers the possibility to make the science output an efficient measure for design optimization and feasibility testing. We present the architecture, first science, and computational performance results of the simulation pipeline. The framework is general, but for the benchmark tests, we use the Dark Energy Spectrometer (DESpec), one of the early concepts for the upcoming project, the Dark Energy Spectroscopic Instrument (DESI). As a result, we discuss how the SPOKES framework enables a rigorous process to optimize and exploit spectroscopic survey experiments in order to derive high-precision cosmological measurements optimally.« less

Minding the gap: Children's difficulty conceptualizing spatial intervals as linear measurement units.

PubMed

Solomon, Tracy L; Vasilyeva, Marina; Huttenlocher, Janellen; Levine, Susan C

2015-11-01

Understanding measurement units is critical to mathematics and science learning, but it is a topic that American students find difficult. In 3 studies, we investigated the challenges underlying this difficulty in kindergarten and second grade by comparing performance on different versions of a linear measurement task. Children measured crayons that were either aligned or shifted relative to the left edge of either a continuous ruler or a row of discrete units. The alignment (aligned, shifted) and the measuring tool (ruler, discrete units) were crossed to form 4 types of problems. Study 1 showed good performance in both grades on both types of aligned problems as well as on the shifted problems with discrete units. In contrast, performance was at chance on the shifted ruler problems. Study 2 showed that performance on shifted discrete unit problems declined when numbers were placed on the units, particularly for kindergarteners, suggesting that on the shifted ruler problems, the presence of numbers may have contributed to children's difficulty. However, Study 3 showed that the difficulty on the shifted ruler problems persisted even when the numbers were removed from the ruler. Taken together, these findings suggest that there are multiple challenges to understanding measurement, but that a key challenge is conceptualizing the ruler as a set of countable spatial interval units. (c) 2015 APA, all rights reserved).

Performance Improvement of Power Analysis Attacks on AES with Encryption-Related Signals

NASA Astrophysics Data System (ADS)

Lee, You-Seok; Lee, Young-Jun; Han, Dong-Guk; Kim, Ho-Won; Kim, Hyoung-Nam

A power analysis attack is a well-known side-channel attack but the efficiency of the attack is frequently degraded by the existence of power components, irrelative to the encryption included in signals used for the attack. To enhance the performance of the power analysis attack, we propose a preprocessing method based on extracting encryption-related parts from the measured power signals. Experimental results show that the attacks with the preprocessed signals detect correct keys with much fewer signals, compared to the conventional power analysis attacks.

International Space Station Major Constituent Analyzer On-Orbit Performance

NASA Technical Reports Server (NTRS)

Gardner, Ben D.; Erwin, Phillip M.; Cougar, Tamara; Ulrich, BettyLynn

2017-01-01

The Major Constituent Analyzer (MCA) is a mass spectrometer based system that measures the major atmospheric constituents on the International Space Station. A number of limited-life components require periodic change-out, including the ORU 02 analyzer and the ORU 08 Verification Gas Assembly. The most recent ORU 02 and ORU 08 assemblies in the LAB MCA are operating nominally. For ORU 02, the ion source filaments and ion pump lifetime continue to be key determinants of MCA performance. Finally, the Node 3 MCA is being brought to an operational configuration.

Statistical analysis of CCSN/SS7 traffic data from working CCS subnetworks

NASA Astrophysics Data System (ADS)

Duffy, Diane E.; McIntosh, Allen A.; Rosenstein, Mark; Willinger, Walter

1994-04-01

In this paper, we report on an ongoing statistical analysis of actual CCSN traffic data. The data consist of approximately 170 million signaling messages collected from a variety of different working CCS subnetworks. The key findings from our analysis concern: (1) the characteristics of both the telephone call arrival process and the signaling message arrival process; (2) the tail behavior of the call holding time distribution; and (3) the observed performance of the CCSN with respect to a variety of performance and reliability measurements.

Operation and performance of the LHCb calorimeters

NASA Astrophysics Data System (ADS)

Chefdeville, M.

2018-03-01

The LHCb calorimeters play a key role in the hardware trigger of the experiment. They also serve the measurement of radiative heavy flavor decays and the identification of electrons. Located at twelve meters from the interaction region, they are composed of a plane of scintillating tiles, a preshower detector, an electromagnetic and a hadronic sampling calorimeters using scintillators as active elements. In these proceedings, technical and operational aspects of these detectors are described. Emphasis is then put on calorimeter reconstruction and calibration. Finally, performance for benchmark physics modes are briefly reported.

A framework for operationalization of strategic plans and metrics for corporate performance measurement in transportation asset management

NASA Astrophysics Data System (ADS)

Mteri, Hassan H.

This thesis investigated the business processes required to translate corporate-level strategic plans into tactical and operational plans in the context of transportation asset management. The study also developed a framework for effective performance measure for departments of transportation. The thesis was based on a case study of transportation agencies in the U.S.A. and Canada. The scope is therefore limited or more directly applicable to transportation assets such as pavement, bridges and culverts. The goal was to address the problem of translating or managing strategic plans, especially in the context of the public sector responsible for operating transportation infrastructure. It was observed that many agencies have been successful in formulating good strategic plans but they have performed relatively poorly in translating such corporate-level strategic plans into operational activities. A questionnaire survey was designed and targeted about 30 state agencies that are currently active in transportation asset management. Twenty one (21) transportation agencies in the USA and Canada responded to the questionnaire. The analysis of the questionnaire data showed that there is a lack of a standard approach to managing corporate strategic plans in transportation agencies. The results also indicated that most transportation agencies operate in three organizational levels but there was no systematic approach of translating goal and objectives from high level to lower levels. Approaches in performance measurement were found to vary from agency to agency. A number of limitations were identified in the existing practice on performance measurements. Key weaknesses include the large number of measures in use (as many as 25 or more), and the disconnection between the measures used and the corporate goals and objectives. Lessons from the private sector were thoroughly reviewed in order to build the groundwork for adapting existing tools to the public sector. The existing literature, assumptions and characteristics that make the Balanced Scorecards and strategy maps work effectively in the private sector were identified. Gaps in implementation of strategic plans and the use of Balanced Scorecard in the public sector were derived. Although Balanced Scorecards have previously been used to a limited extent in transportation agencies, the use of combined Balanced Scorecards and strategy maps with a much broader utility of translating strategic plans into tactical and operational activities for Transportation Asset Management is yet to be established. The thesis presents a framework to operationalize strategic plans through the combined application of Balanced Scorecards and strategy maps. The proposed framework aligns overarching objectives in all organizational levels: corporate, tactical, and operation, in which detail information is delegated from top level to lower levels. Furthermore, the thesis presents a proposed framework for developing and using effective corporate performance measures. The framework for performance measures provides a key tool for tracking progress and ensuring overall operationalization of strategic plans in transportation agencies. The thesis presents a methodology to assess existing performance measures so that agencies can reduce the number of measures, to be more effective and manageable. It was found that among other good characteristics, corporate performance measures must be tied to agency's goals and objectives and must be sensitive or responsive to program delivery activities and to the impacts of decisions about resource allocation.

Two-photon absorption laser-induced fluorescence measurements of atomic nitrogen in a radio-frequency atmospheric-pressure plasma jet

NASA Astrophysics Data System (ADS)

Wagenaars, E.; Gans, T.; O'Connell, D.; Niemi, K.

2012-08-01

The first direct measurements of atomic nitrogen species in a radio-frequency atmospheric-pressure plasma jet (APPJ) are presented. Atomic nitrogen radicals play a key role in new plasma medicine applications of APPJs. The measurements were performed with a two-photon absorption laser-induced fluorescence diagnostic, using 206.65 nm laser photons for the excitation of ground-state N atoms and observing fluorescence light around 744 nm. The APPJ was run with a helium gas flow of 1 slm and varying small admixtures of molecular nitrogen of 0-0.7 vol%. A maximum in the measured N concentration was observed for an admixture of 0.25 vol% N2.

Objective comparison of particle tracking methods.

PubMed

Chenouard, Nicolas; Smal, Ihor; de Chaumont, Fabrice; Maška, Martin; Sbalzarini, Ivo F; Gong, Yuanhao; Cardinale, Janick; Carthel, Craig; Coraluppi, Stefano; Winter, Mark; Cohen, Andrew R; Godinez, William J; Rohr, Karl; Kalaidzidis, Yannis; Liang, Liang; Duncan, James; Shen, Hongying; Xu, Yingke; Magnusson, Klas E G; Jaldén, Joakim; Blau, Helen M; Paul-Gilloteaux, Perrine; Roudot, Philippe; Kervrann, Charles; Waharte, François; Tinevez, Jean-Yves; Shorte, Spencer L; Willemse, Joost; Celler, Katherine; van Wezel, Gilles P; Dan, Han-Wei; Tsai, Yuh-Show; Ortiz de Solórzano, Carlos; Olivo-Marin, Jean-Christophe; Meijering, Erik

2014-03-01

Particle tracking is of key importance for quantitative analysis of intracellular dynamic processes from time-lapse microscopy image data. Because manually detecting and following large numbers of individual particles is not feasible, automated computational methods have been developed for these tasks by many groups. Aiming to perform an objective comparison of methods, we gathered the community and organized an open competition in which participating teams applied their own methods independently to a commonly defined data set including diverse scenarios. Performance was assessed using commonly defined measures. Although no single method performed best across all scenarios, the results revealed clear differences between the various approaches, leading to notable practical conclusions for users and developers.

Deception studies manipulating centrally acting performance modifiers: a review.

PubMed

Williams, Emily L; Jones, Hollie S; Sparks, Sandy; Marchant, David C; Micklewright, Dominic; McNaughton, Lars R

2014-07-01

Athletes anticipatorily set and continuously adjust pacing strategies before and during events to produce optimal performance. Self-regulation ensures maximal effort is exerted in correspondence with the end point of exercise, while preventing physiological changes that are detrimental and disruptive to homeostatic control. The integration of feedforward and feedback information, together with the proposed brain's performance modifiers is said to be fundamental to this anticipatory and continuous regulation of exercise. The manipulation of central, regulatory internal and external stimuli has been a key focus within deception research, attempting to influence the self-regulation of exercise and induce improvements in performance. Methods of manipulating performance modifiers such as unknown task end point, deceived duration or intensity feedback, self-belief, or previous experience create a challenge within research, as although they contextualize theoretical propositions, there are few ecological and practical approaches which integrate theory with practice. In addition, the different methods and measures demonstrated in manipulation studies have produced inconsistent results. This review examines and critically evaluates the current methods of how specific centrally controlled performance modifiers have been manipulated, within previous deception studies. From the 31 studies reviewed, 10 reported positive effects on performance, encouraging future investigations to explore the mechanisms responsible for influencing pacing and consequently how deceptive approaches can further facilitate performance. The review acts to discuss the use of expectation manipulation not only to examine which methods of deception are successful in facilitating performance but also to understand further the key components used in the regulation of exercise and performance.

Ku-band signal design study. [space shuttle orbiter data processing network

NASA Technical Reports Server (NTRS)

Rubin, I.

1978-01-01

Analytical tools, methods and techniques for assessing the design and performance of the space shuttle orbiter data processing system (DPS) are provided. The computer data processing network is evaluated in the key areas of queueing behavior synchronization and network reliability. The structure of the data processing network is described as well as the system operation principles and the network configuration. The characteristics of the computer systems are indicated. System reliability measures are defined and studied. System and network invulnerability measures are computed. Communication path and network failure analysis techniques are included.

ComPAQS: a compact concentric UV/visible spectrometer, providing a new tool for air quality monitoring from space

NASA Astrophysics Data System (ADS)

Leigh, Roland J.; Whyte, C.; Cutter, M. A.; Lobb, D. R.; Monks, P. S.

2017-11-01

Under the first phase of the Centre for Earth Observation Instrumentation (CEOI), a breadboard demonstrator of a novel UV/VIS spectrometer has been developed. Using designs from Surrey Satellite Technology Ltd (SSTL) the demonstrator has been constructed and tested at the University of Leicester's Space Research Centre. This spectrometer provides an exceptionally compact instrument for differential optical absorption spectroscopy (DOAS) applications from LEO, GEO, HAP or ground-based platforms. Measurement of atmo spheric compounds with climate change or air quality implications is a key driver for the ground and space-based Earth Observation communities. Techniques using UV/VIS spectroscopy such as DOAS provide measurements of ozone profiles, aerosol optical depth, certain Volatile Organic Compounds, halogenated species, and key air quality parameters including tropospheric nitrogen dioxide. Compact instruments providing the necessary optical performance and spectral resolution are therefore a key enabling technology. The Compact Air Quality Spectrometer (CompAQS) features a concentric arrangement of a spherical meniscus lens, a concave spherical mirror and a suitable curved diffraction grating. This compact design provides efficiency and performance benefits over traditional concepts, improving the precision and spatial resolution available from space borne instruments with limited weight and size budgets. The breadboard spectrometer currently operating at the University of Leicester offers high throughput with a spectral range from 310 to 450 nm at 0.5nm(UV) to 1.0nm (visible) resolution, suitable for DOAS applications. The concentric design is capable of handling high relative apertures, owing to spherical aberration and coma being near zero at all surfaces. The design also provides correction for transverse chromatic aberration and distortion, in addition to correcting for the distortion called `smile' - the curvature of the slit image formed at each wavelength. These properties render this design capable of superior spectral and spatial performance with size and weight budgets significantly lower than standard configurations. In this presentation, the design of the spectrometer is detailed, with results from instrument characterisations undertaken at the University of Leicester, including demonstrations of DOAS fits for key air quality species.

Strategic management system in a healthcare setting--moving from strategy to results.

PubMed

Devitt, Rob; Klassen, Wolf; Martalog, Julian

2005-01-01

One of the historical challenges in the healthcare system has been the identification and collection of meaningful data to measure an organization's progress towards the achievement of its strategic goals and the concurrent alignment of internal operating practices with this strategy. Over the last 18 months the Toronto East General Hospital (TEGH) has adopted a strategic management system and organizing framework that has led to a metric-based strategic plan. It has allowed for formal and measurable linkages across a full range of internal business processes, from the annual operating plan to resource allocation decisions, to the balanced scorecard and individual performance evaluations. The Strategic Management System (SMS) aligns organizational planning and performance measurement, facilitates an appropriate balance between organizational priorities and resolving "local" problems, and encourages behaviours that are consistent with the values upon which the organization is built. The TEGH Accountability Framework serves as the foundation for the entire system. A key tool of the system is the rolling three-year strategic plan for the organization that sets out specific annual improvement targets on a number of key strategic measures. Individual program/department plans with corresponding measures ensure that the entire organization is moving forward strategically. Each year, all plans are reviewed, with course adjustments made to reflect changes in the hospital's environment and with re-calibration of performance targets for the next three years to ensure continued improvement and organizational progress. This system has been used through one annual business cycle. Results from the past year show measurable success. The hospital has improved on 12 of the 15 strategic plan metrics, including achieving the targeted 1% operating surplus while operating in an environment of tremendous change and uncertainty. This article describes the strategic management system used at TEGH and demonstrates the formal integration of the plan into its operating and decision making processes. It also provides examples of the metrics, their use in decision-making and the variance reporting and improvement mechanisms. The article also demonstrates that a measurement-oriented approach to the planning and delivery of community hospital service is both achievable and valuable in terms of accountability and organizational responsiveness.

Results and evaluation of key comparison CCM.P-K12.1 for very low helium flow rates (leak rates)

NASA Astrophysics Data System (ADS)

Šetina, Janez; Vičar, Martin; Pražák, Dominik

2015-01-01

The Czech Metrology Institute (CMI) took part and failed to prove equivalence in the Key Comparison CCM.P-K12 of helium leak artefacts (leak rates) into vacuum. After identifying and eliminating the cause of the failure, the Institute of Metals and Technology (IMT) of Slovenia, a successful participant in CCM.P-K12, volunteered to serve as pilot and link in a following bilateral comparison of IMT and CMI that obtained designation CCM.P-K12.1 in June 2012. It was decided to perform the comparison with a glass permeation helium leak artefact at nominally 3.10-11 mol/s (7.4.10-7 mbar.L.s-1) at 23 °C. Both the laboratory standards took part in CCM.P-K12 and were considered as primary. The comparison measurements were performed in October 2012. CMI proved equivalence both with IMT and with the reference value of the key comparison CCM.P-K12. Main text. To reach the main text of this paper, click on Final Report. Note that this text is that which appears in Appendix B of the BIPM key comparison database kcdb.bipm.org/. The final report has been peer-reviewed and approved for publication by CCM, according to the provisions of the CIPM Mutual Recognition Arrangement (CIPM MRA).

Performance Measurement: A Proposal to Increase Use of SBIRT and Decrease Alcohol Consumption during Pregnancy

PubMed Central

O’Brien, Peggy L.

2013-01-01

Objectives Alcohol consumption during pregnancy has negative implications for maternal and child health. Appropriate early universal Screening, Brief Intervention and Referral to Treatment (SBIRT) for pregnant women is necessary to identify women at risk and reduce the likelihood of continued drinking. Because SBIRT is not consistently used, the development and use of performance measures to assure implementation of SBIRT are key steps towards intervention and reduction of alcohol consumption during pregnancy. Methods Practice guidelines provide ample support for specific instruments designed for SBIRT in prenatal care. An examination of existing performance measures related to alcohol consumption during pregnancy, however, reveals no comprehensive published performance measure designed to quantify the use of SBIRT for alcohol use in prenatal care. Results Process performance measures were developed that can determine the proportion of pregnant women who are screened during the course of prenatal care and the proportion of women requiring either brief intervention or referral to substance use disorder treatment who received those interventions. The measures require use of screening instruments validated for use with pregnant women. Conclusions The two proposed measures would represent a significant step in efforts to assure appropriate intervention for women who drink during pregnancy, hold accountable providers who do not employ SBIRT, and provide a basis from which necessary systemic changes might occur. Pregnancy is a time when many women are motivated to stop drinking. That opportunity should be seized, with timely intervention offering assistance for pregnant women who have not stopped drinking of their own accord. PMID:23483413

The role of health informatics in clinical audit: part of the problem or key to the solution?

PubMed

Georgiou, Andrew; Pearson, Michael

2002-05-01

The concepts of quality assurance (for which clinical audit is an essential part), evaluation and clinical governance each depend on the ability to derive and record measurements that describe clinical performance. Rapid IT developments have raised many new possibilities for managing health care. They have allowed for easier collection and processing of data in greater quantities. These developments have encouraged the growth of quality assurance as a key feature of health care delivery. In the past most of the emphasis has been on hospital information systems designed predominantly for the administration of patients and the management of financial performance. Large, hi-tech information system capacity does not guarantee quality information. The task of producing information that can be confidently used to monitor the quality of clinical care requires attention to key aspects of the design and operation of the audit. The Myocardial Infarction National Audit Project (MINAP) utilizes an IT-based system to collect and process data on large numbers of patients and make them readily available to contributing hospitals. The project shows that IT systems that employ rigorous health informatics methodologies can do much to improve the monitoring and provision of health care.

SMART marine goals, targets and management - Is SDG 14 operational or aspirational, is 'Life Below Water' sinking or swimming?

PubMed

Cormier, Roland; Elliott, Michael

2017-10-15

The United Nations Sustainable Development Goals (SDG), adopted in September 2015, are accompanied by targets which have to be met individually and collectively by the signatory states. SDG14 Life Below Water aims to lay the foundation for the integrated and sustainable management of the oceans. However, any environmental management has to be based around targets which are SMART - specific, measurable, achievable, realistic and time bounded - otherwise it is not possible to determine whether management actions are successful and achieve the desired aims. The discussion here shows that many of the targets adopted for SDG14, and especially a detailed analysis of Target 1, are aspirational rather than fully quantified. In order to move towards making the targets operational, we advocate merging the language of environmental management with that used by industry for linking risks to the environment, management performance and ensuing controls. By adopting an approach which uses Key Performance Indicators ('KPIs'), Key Risk Indicators ('KRIs') and Key Control Indicators ('KCIs'), we advocate that a degree of rigour leading to defendable actions can be brought to marine management. Copyright © 2017 Elsevier Ltd. All rights reserved.

Public assessment of key performance indicators of healthcare in a Canadian province: the effect of age and chronic health problems.

PubMed

Nurullah, Abu Sadat; Northcott, Herbert C; Harvey, Michael D

2014-01-15

This study explores the effect of age and chronic conditions on public perceptions of the health system, as measured by the Key Performance Indicators (KPIs) of healthcare, in the province of Alberta in Canada. Drawing from data collected by Government of Alberta's Department of Health and Wellness, this research examines two key questions: (1) Do people in the 65+ age group rate the KPIs of healthcare (i.e., availability, accessibility, quality, outcome, and satisfaction) more favorably compared to people in younger age groups in Alberta? (2) Does the rating of KPIs of healthcare in Alberta vary with different chronic conditions (i.e., no chronic problem, chronic illnesses without pain, and chronic pain)? The findings indicate that people in the older age group tend to rate the KPIs of healthcare more favorably compared to younger age groups in Alberta, net of socio-demographic factors, self-reported health status, and knowledge and utilization of health services. However, people experiencing chronic pain are less likely to rate the KPIs of healthcare favorably compared to people with no chronic health problem in Alberta. Discussion includes implications of the findings for the healthcare system in the province.

UK national audit against the key performance indicators in the British Association for Sexual Health and HIV Medical Foundation for AIDS and Sexual Health Sexually Transmitted Infections Management Standards.

PubMed

McClean, H; Sullivan, A K; Carne, C A; Warwick, Z; Menon-Johansson, A; Clutterbuck, D

2012-10-01

A national audit of practice performance against the key performance indicators in the British Association for Sexual Health and HIV (BASHH) and HIV Medical Foundation for AIDS Sexual Health Standards for the Management of Sexually Transmitted Infections (STIs) was conducted in 2011. Approximately 60% and 8% of level 3 and level 2 services, respectively, participated. Excluding partner notification performance, the five lowest areas of performance for level 3 clinics were the STI/HIV risk assessment, care pathways linking care in level 2 clinics to local level 3 services, HIV test offer to patients with concern about STIs, information governance and receipt of chlamydial test results by clinicians within seven working days (the worst area of performance). The five lowest areas of performance for level 2 clinics were participating in audit, having an audit plan for the management of STIs for 2009-2010, the STI/HIV risk assessment, HIV test offer to patients with concern about STIs and information governance. The results are discussed with regard to the importance of adoption of the standards by commissioners of services because of their relevance to other national quality assurance drivers, and the need for development of a national system of STI management quality assurance measurement and reporting.

Measuring Information Security Performance with 10 by 10 Model for Holistic State Evaluation

PubMed Central

2016-01-01

Organizations should measure their information security performance if they wish to take the right decisions and develop it in line with their security needs. Since the measurement of information security is generally underdeveloped in practice and many organizations find the existing recommendations too complex, the paper presents a solution in the form of a 10 by 10 information security performance measurement model. The model—ISP 10×10M is composed of ten critical success factors, 100 key performance indicators and 6 performance levels. Its content was devised on the basis of findings presented in the current research studies and standards, while its structure results from an empirical research conducted among information security professionals from Slovenia. Results of the study show that a high level of information security performance is mostly dependent on measures aimed at managing information risks, employees and information sources, while formal and environmental factors have a lesser impact. Experts believe that information security should evolve systematically, where it’s recommended that beginning steps include technical, logical and physical security controls, while advanced activities should relate predominantly strategic management activities. By applying the proposed model, organizations are able to determine the actual level of information security performance based on the weighted indexing technique. In this manner they identify the measures they ought to develop in order to improve the current situation. The ISP 10×10M is a useful tool for conducting internal system evaluations and decision-making. It may also be applied to a larger sample of organizations in order to determine the general state-of-play for research purposes. PMID:27655001

Enhancing performance of next generation FSO communication systems using soft computing-based predictions.

PubMed

Kazaura, Kamugisha; Omae, Kazunori; Suzuki, Toshiji; Matsumoto, Mitsuji; Mutafungwa, Edward; Korhonen, Timo O; Murakami, Tadaaki; Takahashi, Koichi; Matsumoto, Hideki; Wakamori, Kazuhiko; Arimoto, Yoshinori

2006-06-12

The deterioration and deformation of a free-space optical beam wave-front as it propagates through the atmosphere can reduce the link availability and may introduce burst errors thus degrading the performance of the system. We investigate the suitability of utilizing soft-computing (SC) based tools for improving performance of free-space optical (FSO) communications systems. The SC based tools are used for the prediction of key parameters of a FSO communications system. Measured data collected from an experimental FSO communication system is used as training and testing data for a proposed multi-layer neural network predictor (MNNP) used to predict future parameter values. The predicted parameters are essential for reducing transmission errors by improving the antenna's accuracy of tracking data beams. This is particularly essential for periods considered to be of strong atmospheric turbulence. The parameter values predicted using the proposed tool show acceptable conformity with original measurements.

Calorimetric thermal-vacuum performance characterization of the BAe 80 K space cryocooler

NASA Technical Reports Server (NTRS)

Kotsubo, V. Y.; Johnson, D. L.; Ross, R. G., Jr.

1992-01-01

A comprehensive characterization program is underway at JPL to generate test data on long-life, miniature Stirling-cycle cryocoolers for space application. The key focus of this paper is on the thermal performance of the British Aerospace (BAe) 80 K split-Stirling-cycle cryocooler as measured in a unique calorimetric thermal-vacuum test chamber that accurately simulates the heat-transfer interfaces of space. Two separate cooling fluid loops provide precise individual control of the compressor and displacer heatsink temperatures. In addition, heatflow transducers enable calorimetric measurements of the heat rejected separately by the compressor and displacer. Cooler thermal performance has been mapped for coldtip temperatures ranging from below 45 K to above 150 K, for heatsink temperatures ranging from 280 K to 320 K, and for a wide variety of operational variables including compressor-displacer phase, compressor-displacer stroke, drive frequency, and piston-displacer dc offset.

The Relationship Between Artificial and Second Language Learning.

PubMed

Ettlinger, Marc; Morgan-Short, Kara; Faretta-Stutenberg, Mandy; Wong, Patrick C M

2016-05-01

Artificial language learning (ALL) experiments have become an important tool in exploring principles of language and language learning. A persistent question in all of this work, however, is whether ALL engages the linguistic system and whether ALL studies are ecologically valid assessments of natural language ability. In the present study, we considered these questions by examining the relationship between performance in an ALL task and second language learning ability. Participants enrolled in a Spanish language class were evaluated using a number of different measures of Spanish ability and classroom performance, which was compared to IQ and a number of different measures of ALL performance. The results show that success in ALL experiments, particularly more complex artificial languages, correlates positively with indices of L2 learning even after controlling for IQ. These findings provide a key link between studies involving ALL and our understanding of second language learning in the classroom. Copyright © 2015 Cognitive Science Society, Inc.

Developing Emergency Room Key Performance Indicators: What to Measure and Why Should We Measure It?

PubMed

Khalifa, Mohamed; Zabani, Ibrahim

2016-01-01

Emergency Room (ER) performance has been a timely topic for both healthcare practitioners and researchers. King Faisal Specialist Hospital and Research Center, Saudi Arabia worked on developing a comprehensive set of KPIs to monitor, evaluate and improve the performance of the ER. A combined approach using quantitative and qualitative methods was used to collect and analyze the data. 34 KPIs were developed and sorted into the three components of the ER patient flow model; input, throughput and output. Input indicators included number and acuity of ER patients, patients leaving without being seen and revisit rates. Throughput indicators included number of active ER beds, ratio of ER patients to ER staff and the length of stay including waiting time and treatment time. The turnaround time of supportive services, such as lab, radiology and medications, were also included. Output indicators include boarding time and available hospital beds, ICU beds and patients waiting for admission.

Cognitive Ability: Social Correlates and Consequences in Contemporary China*

PubMed Central

Huang, Guoying; Xie, Yu; Xu, Hongwei

2016-01-01

In this paper, we describe the measurement of cognitive ability in the China Family Panel Studies (CFPS), especially for verbal skill, mathematical skill, memory, and quantitative reasoning. The available CFPS cognitive measurements can be useful for studies on the importance of cognitive ability in many substantive domains of interest. Using the CFPS data, we show that measures of cognitive ability are clearly related to key demographic and social characteristics, such as age, gender, education, and hukou status. We also illustrate how cognitive ability influences school performance and deviant behaviors among children, income and political capital among adults, and daily functioning among the elderly. PMID:27570709

Experimental measurement-device-independent quantum digital signatures over a metropolitan network

NASA Astrophysics Data System (ADS)

Yin, Hua-Lei; Wang, Wei-Long; Tang, Yan-Lin; Zhao, Qi; Liu, Hui; Sun, Xiang-Xiang; Zhang, Wei-Jun; Li, Hao; Puthoor, Ittoop Vergheese; You, Li-Xing; Andersson, Erika; Wang, Zhen; Liu, Yang; Jiang, Xiao; Ma, Xiongfeng; Zhang, Qiang; Curty, Marcos; Chen, Teng-Yun; Pan, Jian-Wei

2017-04-01

Quantum digital signatures (QDSs) provide a means for signing electronic communications with information-theoretic security. However, all previous demonstrations of quantum digital signatures assume trusted measurement devices. This renders them vulnerable against detector side-channel attacks, just like quantum key distribution. Here we exploit a measurement-device-independent (MDI) quantum network, over a metropolitan area, to perform a field test of a three-party MDI QDS scheme that is secure against any detector side-channel attack. In so doing, we are able to successfully sign a binary message with a security level of about 10-7. Remarkably, our work demonstrates the feasibility of MDI QDSs for practical applications.

Multi-wavelength emissivity measurement of stainless steel substrate

NASA Astrophysics Data System (ADS)

Zhang, Y. F. F.; Dai, J. M. M.; Zhang, L.; Pan, W. D. D.

2013-01-01

The emissivity is a key parameter to measure the surface temperature of materials in the radiation thermometry. In this paper, the surface emissivity of metallic substrates is measured by the multi-wavelength emissivity measurement apparatus developed by the Harbin Institute of Technology (HIT). The measuring principle of this apparatus is based on the energy comparison. Several radiation thermometers, whose emissivity coefficients corrected by the measured emissivity from this apparatus, are used to measure the surface temperature of stainless steel substrates. The temperature values measured by means of radiation thermometry are compared to those measured by means of contact thermometry. The relative error between the two means is less than 2% at temperatures from 700K to 1300K, it suggests that the emissivity of stainless steel substrate measured by the multi-wavelength emissivity measurement apparatus are accurate and reliable. Emissivity measurements performed with this apparatus present an uncertainty of 5.9% (cover factor=2).

Quality of psychiatric care in the general hospital: referrer perceptions of an inpatient liaison psychiatry service.

PubMed

Solomons, Luke C; Thachil, Ajoy; Burgess, Caroline; Hopper, Adrian; Glen-Day, Vicky; Ranjith, Gopinath; Hodgkiss, Andrew

2011-01-01

To explore the experience of senior staff on acute medical wards using an established inpatient liaison psychiatry service and obtain their views on clinically relevant performance measures. Semistructured face-to-face interviews with consultants and senior nurses were taped, transcribed and analyzed manually using the framework method of analysis. Twenty-five referrers were interviewed. Four key themes were identified - benefits of the liaison service, potential areas of improvement, indices of service performance such as speed and quality of response and expanded substance misuse service. Respondents felt the liaison service benefited patients, staff and service delivery in the general hospital. Medical consultants wanted stepped management plans devised by consultant liaison psychiatrists. Senior nurses, who perceived themselves as frontline crisis managers, valued on-the-spot input on patient management. Consultants and senior nurses differed in their expectations of liaison psychiatry. Referrers valued speed of response and regarded time from referral to definitive management plan as a key performance indicator for benchmarking services. Copyright © 2011 Elsevier Inc. All rights reserved.

Origins of Highly Stable Al-evaporated Solution-processed ZnO Thin Film Transistors: Insights from Low Frequency and Random Telegraph Signal Noise

NASA Astrophysics Data System (ADS)

Kim, Joo Hyung; Kang, Tae Sung; Yang, Jung Yup; Hong, Jin Pyo

2015-11-01

One long-standing goal in the emerging field of flexible and transparent electronic devices is to meet the demand of key markets, such as enhanced output performance for metal oxide semiconductor thin film transistors (TFTs) prepared by a solution process. While solution-based fabrication techniques are cost-effective and ensure large-area coverage at low temperature, their utilization has the disadvantage of introducing large trap states into TFTs. Such states, the formation of which is induced by intrinsic defects initially produced during preparation, have a significant impact on electrical performance. Therefore, the ability to enhance the electrical characteristics of solution-processed TFTs, along with attaining a firm understanding of their physical nature, remains a key step towards extending their use. In this study, measurements of low-frequency noise and random telegraph signal noise are employed as generic alternative tools to examine the origins of enhanced output performance for solution-processed ZnO TFTs through the control of defect sites by Al evaporation.

Learning Collaborations between ACE and Vocational Education and Training Providers: Good Practice Partnerships. A National Vocational Education and Training Research and Evaluation Program Report

ERIC Educational Resources Information Center

Gelade, Sue; Stehlik, Tom; Willis, Peter

2006-01-01

This project developed in response to the national research priority of the role of vocational education and training (VET) in building economic and social capital in regions and communities. Several key streams of work have been identified in relation to this objective, including regional segmentation, indicators and performance measures, and…

Changing the Subject: How Are the EBacc and Attainment 8 Reforms Changing Results? Research Brief. Edition 13

ERIC Educational Resources Information Center

Allen, Rebecca; Thompson, Dave

2016-01-01

Secondary schools have managed significant changes in the Key Stage 4 curriculum they offer in response to changes in performance tables and accountability measures from 2010 onwards. In this piece, the authors assess how these changes are starting to affect the educational choices and successes of pupils at the ages of 16 and 18. This is…

Evaluation of Rambouillet, Polypay, and Romanov-White Dorper x Rambouillet ewes mated to terminal sires in an extensive rangeland production system: Lamb production

USDA-ARS?s Scientific Manuscript database

Ewe productivity (i.e., total numbers or weight of lamb weaned ÷ number of breeding ewes) is a key indicator of lamb production efficiency. This second-generation study compared various measures of ewe productivity and ewe and lamb performance in an extensive rangeland production system of ewes of 3...

A Low Cost TDRSS Compatible Transmitter Option

NASA Technical Reports Server (NTRS)

Whiteman, Don

2005-01-01

The NASA Space-based Telemetry and Range Safety (STARS) program has developed and tested a low cost Ku-Band transmitter alternative for TDRSS applications based on an existing IRIG shaped offset quaternary phase shift keying (SOQPSK) transmitter. This paper presents information related to the implementation of this low cost system, as well as performance measurements of the alternative TDRSS transmitter system compared with an existing QPSK TDRSS transmitter.

Using a Theory of Action to Develop Performance Indicators to Measure Progress toward a SIMR

ERIC Educational Resources Information Center

Schiller, Ellen; Hayes, Susan; Nagle, Katherine

2015-01-01

This white paper offers an approach for using a theory of action as an outline to develop the SSIP [State Systemic Improvement Plan] Phase II evaluation questions and plan that will guide the SSIP work in Phase III and beyond. Key areas of focus include generating evaluation questions at each level of outcomes, identifying essential steps and…

Junior doctors' extended work hours and the effects on their performance: the Irish case.

PubMed

Flinn, Fiona; Armstrong, Claire

2011-04-01

To explore the relationship between junior doctors' long working hours and their performance in a variety of cognitive and clinical decision-making tests. Also, to consider the implications of performance decrements in such tests for healthcare quality. A within-subject design was used to eliminate variation related to individual differences. Each participant was tested twice, once post call and once rested. At each session, participants were tested on cognitive functioning and clinical decision-making. The study was based on six acute Irish hospitals during 2008. Thirty junior hospital doctors, ages ranged from 23 to 30 years; of them, 17 of the participants were female and 13 were male. Measures Cognitive functioning was measured by the MindStreams Global Assessment Battery (NeuroTrax Corp., NY, USA). This is a set of computerized tests, designed for use in medical settings, that assesses performance in memory, executive function, visual spatial perception, verbal function, attention, information processing speed and motor skills. Clinical decision-making was tested using Key Features Problems. Each Key Features Problem consists of a case scenario and then three to four questions about this scenario. In an effort to make it more realistic, the speed with which participants completed the three problems was also recorded. Participants' global cognitive scores, attention, information processing speed and motor skills were significantly worse post call than when rested. They also took longer to complete clinical decision-making questions in the post-call condition and obtained lower scores than when rested. There are significant negative changes in doctors' cognitive functioning and clinical decision-making performance that appear to be attributable to long working hours. This therefore raises the important question of whether working long hours decreases healthcare quality and compromises patient safety.

Physical employment standards for U.K. fire and rescue service personnel.

PubMed

Blacker, S D; Rayson, M P; Wilkinson, D M; Carter, J M; Nevill, A M; Richmond, V L

2016-01-01

Evidence-based physical employment standards are vital for recruiting, training and maintaining the operational effectiveness of personnel in physically demanding occupations. (i) Develop criterion tests for in-service physical assessment, which simulate the role-related physical demands of UK fire and rescue service (UK FRS) personnel. (ii) Develop practical physical selection tests for FRS applicants. (iii) Evaluate the validity of the selection tests to predict criterion test performance. Stage 1: we conducted a physical demands analysis involving seven workshops and an expert panel to document the key physical tasks required of UK FRS personnel and to develop 'criterion' and 'selection' tests. Stage 2: we measured the performance of 137 trainee and 50 trained UK FRS personnel on selection, criterion and 'field' measures of aerobic power, strength and body size. Statistical models were developed to predict criterion test performance. Stage 3: matter experts derived minimum performance standards. We developed single person simulations of the key physical tasks required of UK FRS personnel as criterion and selection tests (rural fire, domestic fire, ladder lift, ladder extension, ladder climb, pump assembly, enclosed space search). Selection tests were marginally stronger predictors of criterion test performance (r = 0.88-0.94, 95% Limits of Agreement [LoA] 7.6-14.0%) than field test scores (r = 0.84-0.94, 95% LoA 8.0-19.8%) and offered greater face and content validity and more practical implementation. This study outlines the development of role-related, gender-free physical employment tests for the UK FRS, which conform to equal opportunities law. © The Author 2015. Published by Oxford University Press on behalf of the Society of Occupational Medicine. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

Shared periodic performer movements coordinate interactions in duo improvisations.

PubMed

Eerola, Tuomas; Jakubowski, Kelly; Moran, Nikki; Keller, Peter E; Clayton, Martin

2018-02-01

Human interaction involves the exchange of temporally coordinated, multimodal cues. Our work focused on interaction in the visual domain, using music performance as a case for analysis due to its temporally diverse and hierarchical structures. We made use of two improvising duo datasets-(i) performances of a jazz standard with a regular pulse and (ii) non-pulsed, free improvizations-to investigate whether human judgements of moments of interaction between co-performers are influenced by body movement coordination at multiple timescales. Bouts of interaction in the performances were manually annotated by experts and the performers' movements were quantified using computer vision techniques. The annotated interaction bouts were then predicted using several quantitative movement and audio features. Over 80% of the interaction bouts were successfully predicted by a broadband measure of the energy of the cross-wavelet transform of the co-performers' movements in non-pulsed duos. A more complex model, with multiple predictors that captured more specific, interacting features of the movements, was needed to explain a significant amount of variance in the pulsed duos. The methods developed here have key implications for future work on measuring visual coordination in musical ensemble performances, and can be easily adapted to other musical contexts, ensemble types and traditions.

Multi-party Semi-quantum Key Agreement with Delegating Quantum Computation

NASA Astrophysics Data System (ADS)

Liu, Wen-Jie; Chen, Zhen-Yu; Ji, Sai; Wang, Hai-Bin; Zhang, Jun

2017-10-01

A multi-party semi-quantum key agreement (SQKA) protocol based on delegating quantum computation (DQC) model is proposed by taking Bell states as quantum resources. In the proposed protocol, the participants only need the ability of accessing quantum channel and preparing single photons {|0〉, |1〉, |+〉, |-〉}, while the complicated quantum operations, such as the unitary operations and Bell measurement, will be delegated to the remote quantum center. Compared with previous quantum key agreement protocols, this client-server model is more feasible in the early days of the emergence of quantum computers. In order to prevent the attacks from outside eavesdroppers, inner participants and quantum center, two single photon sequences are randomly inserted into Bell states: the first sequence is used to perform the quantum channel detection, while the second is applied to disorder the positions of message qubits, which guarantees the security of the protocol.

Evaluation of the effectiveness of color attributes for video indexing

NASA Astrophysics Data System (ADS)

Chupeau, Bertrand; Forest, Ronan

2001-10-01

Color features are reviewed and their effectiveness assessed in the application framework of key-frame clustering for abstracting unconstrained video. Existing color spaces and associated quantization schemes are first studied. Description of global color distribution by means of histograms is then detailed. In our work, 12 combinations of color space and quantization were selected, together with 12 histogram metrics. Their respective effectiveness with respect to picture similarity measurement was evaluated through a query-by-example scenario. For that purpose, a set of still-picture databases was built by extracting key frames from several video clips, including news, documentaries, sports and cartoons. Classical retrieval performance evaluation criteria were adapted to the specificity of our testing methodology.

Evaluation of the effectiveness of color attributes for video indexing

NASA Astrophysics Data System (ADS)

Chupeau, Bertrand; Forest, Ronan

2001-01-01

Color features are reviewed and their effectiveness assessed in the application framework of key-frame clustering for abstracting unconstrained video. Existing color spaces and associated quantization schemes are first studied. Description of global color distribution by means of histograms is then detailed. In our work, twelve combinations of color space and quantization were selected, together with twelve histogram metrics. Their respective effectiveness with respect to picture similarity measurement was evaluated through a query-be-example scenario. For that purpose, a set of still-picture databases was built by extracting key-frames from several video clips, including news, documentaries, sports and cartoons. Classical retrieval performance evaluation criteria were adapted to the specificity of our testing methodology.

Evaluation of the effectiveness of color attributes for video indexing

NASA Astrophysics Data System (ADS)

Chupeau, Bertrand; Forest, Ronan

2000-12-01

Color features are reviewed and their effectiveness assessed in the application framework of key-frame clustering for abstracting unconstrained video. Existing color spaces and associated quantization schemes are first studied. Description of global color distribution by means of histograms is then detailed. In our work, twelve combinations of color space and quantization were selected, together with twelve histogram metrics. Their respective effectiveness with respect to picture similarity measurement was evaluated through a query-be-example scenario. For that purpose, a set of still-picture databases was built by extracting key-frames from several video clips, including news, documentaries, sports and cartoons. Classical retrieval performance evaluation criteria were adapted to the specificity of our testing methodology.

Development of Bread Board Model of TRMM precipitation radar

NASA Astrophysics Data System (ADS)

Okamoto, Ken'ichi; Ihara, Toshio; Kumagai, Hiroshi

The active array radar was selected as a reliable candidate for the TRMM (Tropical Rainfall Measuring Mission) precipitation radar after the trade off studies performed by Communications Research Laboratory (CRL) in the US-Japan joint feasibility study of TRMM in 1987-1988. Main system parameters and block diagram for TRMM precipitation radar are shown as the result of feasibility study. CRL developed key devices for the active array precipitation radar such as 8-element slotted waveguide array antenna, the 5 bit PIN diode phase shifters, solid state power amplifiers and low noise amplifiers in 1988-1990. Integration of these key devices was made to compose 8-element Bread Board Model of TRMM precipitation radar.

Alcohol & drug abuse: Revisiting employee assistance programs and substance use problems in the workplace: key issues and a research agenda.

PubMed

Merrick, Elizabeth S Levy; Volpe-Vartanian, Joanna; Horgan, Constance M; McCann, Bernard

2007-10-01

This column describes employee assistance program (EAPs) and identifies key issues for contemporary EAPs. These programs began as occupational alcohol programs and have evolved into more comprehensive resources. To better understand contemporary EAPs, the authors suggest a research agenda that includes descriptive studies to provide an up-to-date picture of services; investigations of how contemporary EAPs address substance use problems, including management consultation for early identification; further study of EAPs' effects on outcomes, such as productivity and work group outcomes; examination of the relationship between EAPs and other workplace resources; further examination of influences on EAP utilization; and development and testing of EAP performance measures.

Revisiting Employee Assistance Programs and Substance Use Problems in the Workplace: Key Issues and a Research Agenda

PubMed Central

Levy Merrick, Elizabeth S.; Volpe-Vartanian, Joanna; Horgan, Constance M.; McCann, Bernard

2012-01-01

This column describes employee assistance program (EAPs) and identifies key issues for contemporary EAPs. These programs began as occupational alcohol programs and have evolved into more comprehensive resources. To better understand contemporary EAPs, the authors suggest a research agenda at includes descriptive studies to provide an up-to-date picture of services; investigations of how contemporary EAPs address substance use problems, including management consultation for early identification; further study of EAPs’ effects on outcomes, such as productivity and work group outcomes; examination of the relationship between EAPs and other workplace resources; further examination of influences on EAP utilization; and development and testing of EAP performance measures. PMID:17914000

Working Memory and Speech Comprehension in Older Adults With Hearing Impairment.

PubMed

Nagaraj, Naveen K

2017-10-17

This study examined the relationship between working memory (WM) and speech comprehension in older adults with hearing impairment (HI). It was hypothesized that WM would explain significant variance in speech comprehension measured in multitalker babble (MTB). Twenty-four older (59-73 years) adults with sensorineural HI participated. WM capacity (WMC) was measured using 3 complex span tasks. Speech comprehension was assessed using multiple passages, and speech identification ability was measured using recall of sentence final-word and key words. Speech measures were performed in quiet and in the presence of MTB at + 5 dB signal-to-noise ratio. Results suggested that participants' speech identification was poorer in MTB, but their ability to comprehend discourse in MTB was at least as good as in quiet. WMC did not explain significant variance in speech comprehension before and after controlling for age and audibility. However, WMC explained significant variance in low-context sentence key words identification in MTB. These results suggest that WMC plays an important role in identifying low-context sentences in MTB, but not when comprehending semantically rich discourse passages. In general, data did not support individual variability in WMC as a factor that predicts speech comprehension ability in older adults with HI.

Prospective memory in schizophrenia: relationship to medication management skills, neurocognition, and symptoms in individuals with schizophrenia.

PubMed

Raskin, Sarah A; Maye, Jacqueline; Rogers, Alexandra; Correll, David; Zamroziewicz, Marta; Kurtz, Matthew

2014-05-01

Impaired adherence to medication regimens is a serious concern for individuals with schizophrenia linked to relapse and poorer outcomes. One possible reason for poor adherence to medication is poor ability to remember future intentions, labeled prospective memory skills. It has been demonstrated in several studies that individuals with schizophrenia have impairments in prospective memory that are linked to everyday life skills. However, there have been no studies, to our knowledge, examining the relationship of a clinical measure of prospective memory to medication management skills, a key element of successful adherence. In this Study 41 individuals with schizophrenia and 25 healthy adults were administered a standardized test battery that included measures of prospective memory, medication management skills, neurocognition, and symptoms. Individuals with schizophrenia demonstrated impairments in prospective memory (both time and event-based) relative to healthy controls. Performance on the test of prospective memory was correlated with the standardized measure of medication management in individuals with schizophrenia. Moreover, the test of prospective memory predicted skills in medication adherence even after measures of neurocognition were accounted for. This suggests that prospective memory may play a key role in medication management skills and thus should be a target of cognitive remediation programs.

EPA Monthly Key Performance Indicator Dashboards 2017

EPA Pesticide Factsheets

Each month, the Web Analytics Program posts updated Key Performance Indicator (KPI) dashboards that correspond to three Web performance goals: content consumption, content discovery, and audience engagement.

Development of a Magneto-Resistive Angular Position Sensor for Space Mechanisms

NASA Technical Reports Server (NTRS)

Hahn, Robert; Schmidt, Tilo; Seifart, Klaus; Olberts, Bastian; Romera, Fernando

2016-01-01

Magnetic microsystems in the form of magneto-resistive (MR) sensors are firmly established in automobiles and industrial applications. They are used to measure travel, angle, electrical current, or magnetic fields. MR technology opens up new sensor possibilities in space applications and can be an enabling technology for optimal performance, high robustness and long lifetime at reasonable costs. In some science missions, the technology is already applied, however, the designs are proprietary and case specific, for instance in case of the angular sensors used for JPL/NASA's Mars rover Curiosity [1]. Since 2013 HTS GmbH and Sensitec GmbH have teamed up to develop and qualify a standardized yet flexible to use MR angular sensor for space mechanisms. Starting with a first assessment study and market survey performed under ESA contract, a very strong industry interest in novel, contactless position measurement means was found. Currently a detailed and comprehensive development program is being performed by HTS and Sensitec. The objective of this program is to advance the sensor design up to Engineering Qualification Model level and to perform qualification testing for a representative space application. The paper briefly reviews the basics of magneto-resistive effects and possible sensor applications and describes the key benefits of MR angular sensors with reference to currently operational industrial and space applications. The key applications and specification are presented and the preliminary baseline mechanical and electrical design will be discussed. An outlook on the upcoming development and test stages as well as the qualification program will be provided.