Summary of Key Issues Raised in the Technology for Early Awareness of Addiction and Mental Illness (TEAAM-I) Meeting.

PubMed

Baumel, Amit; Baker, Justin; Birnbaum, Michael L; Christensen, Helen; De Choudhury, Munmun; Mohr, David C; Muench, Fred; Schlosser, Danielle; Titov, Nick; Kane, John M

2018-05-01

Technology provides an unparalleled opportunity to remove barriers to earlier identification and engagement in services for mental and addictive disorders by reaching people earlier in the course of illness and providing links to just-in-time, cost-effective interventions. Achieving this opportunity, however, requires stakeholders to challenge underlying assumptions about traditional pathways to mental health care. In this Open Forum, the authors highlight key issues discussed in the Technology for Early Awareness of Addiction and Mental Illness (TEAAM-I) meeting-held October 13-14, 2016, in New York City-that are related to three identified areas in which technology provides important and unique opportunities to advance early identification, increase service engagement, and decrease the duration of untreated mental and addictive disorders.

Developing Open Source Software To Advance High End Computing. Report to the President.

ERIC Educational Resources Information Center

National Coordination Office for Information Technology Research and Development, Arlington, VA.

This is part of a series of reports to the President and Congress developed by the President's Information Technology Advisory Committee (PITAC) on key contemporary issues in information technology. This report defines open source software, explains PITAC's interest in this model, describes the process used to investigate issues in open source…

Network Centric Communications for Expeditionary or Carrier Strike Groups

DTIC Science & Technology

2011-12-01

known as Modulating Retroreflector (MRR) mode. In this configuration, a source laser transmits a beam to an optical receiver which receives the...be adapted for use at sea and found that interference was a key issue. SPAWAR Systems Center Pacific has spent over a decade trying to address this...ad-hoc wireless technology non-proprietary and radio agnostic. One of the issues with wireless technologies used at sea is the issue of ― beam

A Primer on Taming the Beast.

ERIC Educational Resources Information Center

Ohler, Jason

1999-01-01

Discusses a book, "Taming the Beast: Choice and Control in the Electronic Jungle" that explores 27 key issues about technology in order to understand its impact on ourselves, social structures, and the environment. Highlights include the effective use of technology in schools; anxiety concerning technology; technological literacy; and…

Special issue : safety advancements

DOT National Transportation Integrated Search

1999-04-24

This issue of 'Status Report' focuses on some of the most recent key safety technology improvements. The crash protection in passenger vehicles is improving substantially; advanced frontal airbags will soon be available in a number of models and side...

Issues in the Management of Distance Education.

ERIC Educational Resources Information Center

Murgatroyd, Stephen; Woudstra, Andrew

1989-01-01

Examines key issues facing administrators at Athabasca University and discusses their implications for distance education organizations. Topics discussed include strategic planning; accountability and cost effectiveness; consortia and cooperation; instructional design; managing technological innovation; marketing; quality assurance; and…

Current Issues Survey Report, 2007

ERIC Educational Resources Information Center

Camp, John S.; DeBlois, Peter B.

2007-01-01

The Eighth Annual EDUCAUSE Current Issues Survey asked campus information technology leaders to rate the most critical IT challenges facing them, their campuses, and/or their systems. Four findings associated with all respondents to this year's survey merit special mention. First, for the 2007 survey, the CIC decided to split a key issue choice…

Multidisciplinary optimization in aircraft design using analytic technology models

NASA Technical Reports Server (NTRS)

Malone, Brett; Mason, W. H.

1991-01-01

An approach to multidisciplinary optimization is presented which combines the Global Sensitivity Equation method, parametric optimization, and analytic technology models. The result is a powerful yet simple procedure for identifying key design issues. It can be used both to investigate technology integration issues very early in the design cycle, and to establish the information flow framework between disciplines for use in multidisciplinary optimization projects using much more computational intense representations of each technology. To illustrate the approach, an examination of the optimization of a short takeoff heavy transport aircraft is presented for numerous combinations of performance and technology constraints.

An Integrated Approach for Preservice Teachers' Acceptance and Use of Technology: UTAUT-PST Scale

ERIC Educational Resources Information Center

Kabakçi-Yurdakul, Isil; Ursavas, Ömer Faruk; Becit-Isçitürk, Gökçe

2014-01-01

Problem Statement: In educational systems, teachers and preservice teachers are the keys to the effective use of technology in the teaching and learning processes. Predicting teachers' technology acceptance and use remains an important issue. Models and theories have been developed to explain and predict technology acceptance. The Unified Theory…

Technological Literacy. Research into Practice Series No. 4.

ERIC Educational Resources Information Center

Luke, Carmen

This booklet, which was written for adult literacy practitioners in Australia, examines some key issues currently being raised about new information technologies and technological literacy. The following are among the topics discussed in the booklet's nine sections: innovation and dissemination (effects of videocassette recorders, computers, and…

New technology and regional studies in human ecology: A Papua New Guinea example

NASA Technical Reports Server (NTRS)

Morren, George E. B., Jr.

1991-01-01

Two key issues in using technologies such as digital image processing and geographic information systems are a conceptually and methodologically valid research design and the exploitation of varied sources of data. With this realized, the new technologies offer anthropologists the opportunity to test hypotheses about spatial and temporal variations in the features of interest within a regionally coherent mosaic of social groups and landscapes. Current research on the Mountain OK of Papua New Guinea is described with reference to these issues.

Classrooms.

ERIC Educational Resources Information Center

Butin, Dan

This paper addresses classroom design trends and the key issues schools should consider for better classroom space flexibility and adaptability. Classroom space design issues when schools embrace technology are discussed, as are design considerations when rooms must accommodate different grade levels, the importance of lighting, furniture…

Ten key issues in modern flow chemistry.

PubMed

Wegner, Jens; Ceylan, Sascha; Kirschning, Andreas

2011-04-28

Ten essentials of synthesis in the flow mode, a new enabling technology in organic chemistry, are highlighted as flashlighted providing an insight into current and future issues and developments in this field. © The Royal Society of Chemistry 2011

Space benefits: The secondary application of aerospace technology in other sectors of the economy

NASA Technical Reports Server (NTRS)

1976-01-01

A 'Benefit Briefing Notebook' was prepared for the NASA Technology Utilization Office to provide accurate, convenient, and integrated resource information on the transfer of aerospace technology to other sectors of the U.S. economy. The contents are divided into three sections: (1) transfer overview, (2) benefit cases, and (3) indexes. The transfer overview section provides a general perspective for technology transfer from NASA to other organizations. In addition to a description of the basic transfer modes, the selection criteria for notebook examples and the kinds of benefit data they contain are also presented. The benefits section is subdivided into nineteen subject areas. Each subsection presents one or more key issues of current interest, with discrete transfer cases related to each key issue. Additional transfer examples relevant to each subject area are then presented. Pertinent transfer data are given at the end of each example.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Miller, M.J.

The author outlines what he considers to be the key environmental issues affecting Clean Coal Technology (CCT) deployment both in the US and internationally. Since the international issues are difficult to characterize given different environmental drivers in various countries and regions, the primary focus of his remarks is on US deployment. However, he makes some general remarks, particularly regarding the environmental issues in developing vs. developed countries and how these issues may affect CCT deployment. Further, how environment affects deployment depends on which particular type of clean coal technology one is addressing. It is not the author`s intention to mentionmore » many specific technologies other than to use them for the purposes of example. He generally categorizes CCTs into four groups since environment is likely to affect deployment for each category somewhat differently. These four categories are: Precombustion technologies such as coal cleaning; Combustion technologies such as low NOx burners; Postcombustion technologies such as FGD systems and postcombustion NOx control; and New generation technologies such as gasification and fluidized bed combustion.« less

Using Citygml to Deploy Smart-City Services for Urban Ecosystems

NASA Astrophysics Data System (ADS)

Prandi, F.; De Amicis, R.; Piffer, S.; Soave, M.; Cadzow, S.; Gonzalez Boix, E.; D'Hont, E.

2013-05-01

The rapid technological evolution, which is characterizing all the disciplines involved within the wide concept of smart cities, becomes a key factor to trigger true user-driven innovation. In this context 3D city models will play an increasingly important role in our daily lives and become an essential part of the modern city information infrastructure (Spatial Data Infrastructure). The goal of this paper is to introduce the i-SCOPE (interoperable Smart City services through an Open Platform for urban Ecosystems) project methodology and implementations together with key technologies and open standards. Based on interoperable 3D CityGML UIMs, the aim of i-Scope is to deliver an open platform on top of which it possible to develop, within different domains, various "smart city" services. Moreover, in i-SCOPE different issues, transcending the mere technological domain, are being tackled, including aspects dealing with social and environmental issues. Indeed several tasks including citizen awareness, crowd source and voluntary based data collection as well as privacy issue concerning involved people should be considered.

Wastes to Resources: Appropriate Technologies for Sewage Treatment and Conversion.

ERIC Educational Resources Information Center

Anderson, Stephen P.

Appropriate technology options for sewage management systems are explained in this four-chapter report. The use of appropriate technologies is advocated for its health, environmental, and economic benefits. Chapter 1 presents background information on sewage treatment in the United States and the key issues facing municipal sewage managers.…

Perspectives on Technology in Learning and Teaching Languages

ERIC Educational Resources Information Center

Kern, Richard

2006-01-01

Rapid evolution of communication technologies has changed language pedagogy and language use, enabling new forms of discourse, new forms of authorship, and new ways to create and participate in communities. The first section of this article identifies and discusses four key issues arising from the recent technology-related literature (the status…

Legal Issues & Education Technology: A School Leader's Guide.

ERIC Educational Resources Information Center

National School Boards Association, Alexandria, VA. Council of School Attorneys.

Rapid development of new technologies has outpaced the development of related law, leaving educators in doubt about the management of copyright, privacy, liability, and security. A key provision of facilitating a healthy and safe environment for technology use is the school district's "Acceptable Use Policy" (AUP), which states that use…

Cases on Technological Adaptability and Transnational Learning: Issues and Challenges

ERIC Educational Resources Information Center

Mukerji, Siran, Ed.; Tripathi, Purnendu, Ed.

2010-01-01

Technology holds the key for bridging the gap between access to quality education and the need for enhanced learning experiences. This book contains case studies on divergent themes of personalized learning environments, inclusive learning for social change, innovative learning and assessment techniques, technology and international partnership…

Theorising Knowledge Practices: A Missing Piece of the Educational Technology Puzzle

ERIC Educational Resources Information Center

Howard, Sarah; Maton, Karl

2011-01-01

Educational technology research has been characterised as lacking theoretical frameworks that can enable cumulative knowledge-building across the field. This article explores the value of Legitimation Code Theory (LCT) for addressing these issues by discussing research into the key of integration of information and communication technologies in…

Key technology issues for space robotic systems

NASA Technical Reports Server (NTRS)

Schappell, Roger T.

1987-01-01

Robotics has become a key technology consideration for the Space Station project to enable enhanced crew productivity and to maximize safety. There are many robotic functions currently being studied, including Space Station assembly, repair, and maintenance as well as satellite refurbishment, repair, and retrieval. Another area of concern is that of providing ground based experimenters with a natural interface that they might directly interact with their hardware onboard the Space Station or ancillary spacecraft. The state of the technology is such that the above functions are feasible; however, considerable development work is required for operation in this gravity-free vacuum environment. Furthermore, a program plan is evolving within NASA that will capitalize on recent government, university, and industrial robotics research and development (R and D) accomplishments. A brief summary is presented of the primary technology issues and physical examples are provided of the state of the technology for the initial operational capability (IOC) system as well as for the eventual final operational capability (FOC) Space Station.

Technological Proficiency as a Key to Job Security. Trends and Issues Alert No. 6.

ERIC Educational Resources Information Center

Imel, Susan

Although not all current jobs require basic computer skills, technological advances in society have created new jobs and changed the ways many existing jobs are performed. Clearly, workers who are proficient in technology have a greater advantage in the current workplace and the need for technologically proficient workers will only continue to…

Key Issues in the Networking Field Today. Proceedings of the Library of Congress Network Advisory Committee Meeting (Washington, DC, May 6-8, 1985). Network Planning Paper No. 12.

ERIC Educational Resources Information Center

Library of Congress, Washington, DC. Network Development Office.

The May 1985 program session of the Library of Congress Network Advisory Committee focused on the identification of key issues in the networking field. Presentations included discussions of major network developments in the last two decades, the changing network players, the impact of technology on networks, and library networks and the law. The…

What does voice-processing technology support today?

PubMed Central

Nakatsu, R; Suzuki, Y

1995-01-01

This paper describes the state of the art in applications of voice-processing technologies. In the first part, technologies concerning the implementation of speech recognition and synthesis algorithms are described. Hardware technologies such as microprocessors and DSPs (digital signal processors) are discussed. Software development environment, which is a key technology in developing applications software, ranging from DSP software to support software also is described. In the second part, the state of the art of algorithms from the standpoint of applications is discussed. Several issues concerning evaluation of speech recognition/synthesis algorithms are covered, as well as issues concerning the robustness of algorithms in adverse conditions. Images Fig. 3 PMID:7479720

Biotechnology: Impact on sugarcane agriculture and industry

USDA-ARS?s Scientific Manuscript database

Of the nine key technology issues that affect the sustainability of the sugar- or bio-energy- cane industry, namely: land, fertility, water, variety, planting density, crop protection, cultural practices, harvesting and processing, and lately, information technology, growing the right varieties rema...

Intended and Unintended Consequences of Educational Technology on Social Inequality

ERIC Educational Resources Information Center

Tawfik, Andrew A.; Reeves, Todd D.; Stich, Amy

2016-01-01

While much has been written in the field of educational technology regarding educational excellence and efficiency, less attention has been paid to issues of equity. Along these lines, the field of educational technology often does not address key equity problems such as academic achievement and attainment gaps, and inequality of educational…

APA Summit on Medical Student Education Task Force on Informatics and Technology: Learning about Computers and Applying Computer Technology to Education and Practice

ERIC Educational Resources Information Center

Hilty, Donald M.; Hales, Deborah J.; Briscoe, Greg; Benjamin, Sheldon; Boland, Robert J.; Luo, John S.; Chan, Carlyle H.; Kennedy, Robert S.; Karlinsky, Harry; Gordon, Daniel B.; Yager, Joel; Yellowlees, Peter M.

2006-01-01

Objective: This article provides a brief overview of important issues for educators regarding medical education and technology. Methods: The literature describes key concepts, prototypical technology tools, and model programs. A work group of psychiatric educators was convened three times by phone conference to discuss the literature. Findings…

Research on the architecture and key technologies of SIG

NASA Astrophysics Data System (ADS)

Fu, Zhongliang; Meng, Qingxiang; Huang, Yan; Liu, Shufan

2007-06-01

Along with the development of computer network, Grid has become one of the hottest issues of researches on sharing and cooperation of Internet resources throughout the world. This paper illustrates a new architecture of SIG-a five-hierarchy architecture (including Data Collecting Layer, Grid Layer, Service Layer, Application Layer and Client Layer) of SIG from the traditional three hierarchies (only including resource layer, service layer and client layer). In the paper, the author proposes a new mixed network mode of Spatial Information Grid which integrates CAG (Certificate Authority of Grid) and P2P (Peer to Peer) in the Grid Layer, besides, the author discusses some key technologies of SIG and analysis the functions of these key technologies.

Medical technology as a key driver of rising health expenditure: disentangling the relationship

PubMed Central

Sorenson, Corinna; Drummond, Michael; Bhuiyan Khan, Beena

2013-01-01

Health care spending has risen steadily in most countries, becoming a concern for decision-makers worldwide. Commentators often point to new medical technology as the key driver for burgeoning expenditures. This paper critically appraises this conjecture, based on an analysis of the existing literature, with the aim of offering a more detailed and considered analysis of this relationship. Several databases were searched to identify relevant literature. Various categories of studies (eg, multivariate and cost-effectiveness analyses) were included to cover different perspectives, methodological approaches, and issues regarding the link between medical technology and costs. Selected articles were reviewed and relevant information was extracted into a standardized template and analyzed for key cross-cutting themes, ie, impact of technology on costs, factors influencing this relationship, and methodological challenges in measuring such linkages. A total of 86 studies were reviewed. The analysis suggests that the relationship between medical technology and spending is complex and often conflicting. Findings were frequently contingent on varying factors, such as the availability of other interventions, patient population, and the methodological approach employed. Moreover, the impact of technology on costs differed across technologies, in that some (eg, cancer drugs, invasive medical devices) had significant financial implications, while others were cost-neutral or cost-saving. In light of these issues, we argue that decision-makers and other commentators should extend their focus beyond costs solely to include consideration of whether medical technology results in better value in health care and broader socioeconomic benefits. PMID:23807855

Ethics in Evaluating a Sociotechnical Intervention With Socially Isolated Older Adults.

PubMed

Waycott, Jenny; Morgans, Amee; Pedell, Sonja; Ozanne, Elizabeth; Vetere, Frank; Kulik, Lars; Davis, Hilary

2015-11-01

The purpose of this article is to consider how ethical principles can inform the effective design and implementation of technology-based interventions that aim to promote the well-being of socially isolated older adults. We evaluated a new iPad application with small groups of older adults. In this article, we reflect on the ethical issues encountered at each stage of the research process. Drawing on the ethical principles of beneficence, research merit and integrity, justice, and respect, we identify key issues to consider in the future design and implementation of social isolation interventions that use new technologies. Key issues include (a) providing sufficient support to facilitate ongoing social interactions, (b) managing older adults' expectations, (c) providing encouragement without coercion, and (d) responding to individual needs. We conclude that it is important to report on ethical challenges incurred when evaluating social isolation interventions to inform future research in this important area. © The Author(s) 2015.

From Seurat to Snapshots: What the Visual Arts Could Contribute to Education.

ERIC Educational Resources Information Center

Duncum, Paul

1996-01-01

Advocates reconceptualizing visual arts as a core subject embodying key elements of experiential learning and critical thinking through an interdisciplinary approach. Illustrates this approach with a discussion of the interconnected issues surrounding family snapshots (social history, aesthetics, technological advancement). Discusses issues of…

Internet Issues and Applications, 1997-1998.

ERIC Educational Resources Information Center

Dempsey, Bert J., Ed.; Jones, Paul, Ed.

This book gives an overview of the leading-edge Internet application areas (streaming multimedia, collaborative tools, Web databases) and key information policy issues (privacy, censorship, information quality, and more). The text serves as a primer on understanding the forces--economic, legal, social, as well as technological--that are shaping…

Intentionality and Wisdom in Language, Information, and Technology

ERIC Educational Resources Information Center

Lin, Lin; Ross, Haj; O'Connor, Brian; Spector, J. Michael

2015-01-01

An interdisciplinary approach from linguistics, information sciences, learning sciences, and educational technology is used to explore the concept of information. Several key issues are highlighted, including: (1) learning language through meaning or probability; (2) the situational difference between message and meaning; (3) relationship between…

Physics Matters: An Introduction to Conceptual Physics

NASA Astrophysics Data System (ADS)

Trefil, James; Hazen, Robert M.

2003-12-01

From amusement park rides to critical environmental issues such as energy generation-physics affects almost every aspect of our world. In PHYSICS MATTERS, James Trefil and Robert Hazen examine the fundamental physics principles at work behind the many practical applications that fuel our society and individual lives. Their goal is to promote a deeper understanding of how the great ideas of physics connect to form a much larger understanding of the universe in which we live. Highlights Helps readers build a general knowledge of key ideas in physics and their connection to technology and other areas of science. Promotes an appreciation of what science is, how scientific knowledge is developed, and how it differs from other intellectual activities. Examines modern technologies, including GPS, the Internet, and information technologies, as well as medical technologies, such as MRI, PET scans, CAT scans, and radioisotope tracers. Explores key issues facing the world today, such as global warning, nuclear waste, and government funding for research.

Physics Matters: An Introduction to Conceptual Physics, Activity Book

NASA Astrophysics Data System (ADS)

Trefil, James; Hazen, Robert M.

2004-02-01

From amusement park rides to critical environmental issues such as energy generation-physics affects almost every aspect of our world. In PHYSICS MATTERS, James Trefil and Robert Hazen examine the fundamental physics principles at work behind the many practical applications that fuel our society and individual lives. Their goal is to promote a deeper understanding of how the great ideas of physics connect to form a much larger understanding of the universe in which we live. Highlights Helps readers build a general knowledge of key ideas in physics and their connection to technology and other areas of science. Promotes an appreciation of what science is, how scientific knowledge is developed, and how it differs from other intellectual activities. Examines modern technologies, including GPS, the Internet, and information technologies, as well as medical technologies, such as MRI, PET scans, CAT scans, and radioisotope tracers. Explores key issues facing the world today, such as global warning, nuclear waste, and government funding for research.

Space Transportation Propulsion Technology Symposium. Volume 1: Executive summary

NASA Technical Reports Server (NTRS)

1991-01-01

The Space Transportation Propulsion Technology Symposium was held to provide a forum for communication within the propulsion within the propulsion technology developer and user communities. Emphasis was placed on propulsion requirements and initiatives to support current, next generation, and future space transportation systems, with the primary objectives of discerning whether proposed designs truly meet future transportation needs and identifying possible technology gaps, overlaps, and other programmatic deficiencies. Key space transportation propulsion issues were addressed through four panels with government, industry, and academia membership. The panels focused on systems engineering and integration; development, manufacturing and certification; operational efficiency; and program development and cultural issues.

Model of the Students' Key Competences Development through Interactive Whiteboard in the Subject of Technology

ERIC Educational Resources Information Center

Brecka, Peter; Valentová, Monika

2017-01-01

The basis of the submitted study are the continuously rising demands to alter the curricula with the aim to develop students' key competences in order to increase their professional versatility. The lack of scientific research and discussions show that little investigation has been done on the issue of development of key competences. Therefore,…

Technology and Technological Knowledge: A Challenge for School Curricula

ERIC Educational Resources Information Center

Gibson, Ken

2008-01-01

In contrast to subjects such as mathematics and the sciences, it has been argued that technology education lacks a clear definition and a clearly defined knowledge base. This discursive article seeks to inform the debate by highlighting the matter of subject definition and in addition to examine the key issue of the knowledge which underpins…

Developing Communities of Enquiry: Dealing with Social and Ethical Issues in Science at Key Stage 3

ERIC Educational Resources Information Center

Dunlop, Lynda; Humes, Gill; Clarke, Linda; Martin, Valerie McKelvey

2011-01-01

Reproductive technologies, drug discovery and exploration of the universe are areas of contemporary research that raise issues for individuals and society. Forward Thinking, Northern Ireland uses the development of communities of enquiry to promote discussion of these and other social and ethical issues in science with students aged 11-14 years.…

Impact Assessment and Forecasts of Information and Telecommunications Technologies Applied to Education and Training: Volume II--Main Report and Issues Analyses. Analysis for the Orientation of the Work of Sector Actors in the Framework of DELTA.

ERIC Educational Resources Information Center

Commission of the European Communities, Brussels (Belgium).

This report, the second volume in a three volume set, summarizes the results of a study performed by the DELTA (Developing European Learning through Technological Advance) unit in parallel with the projects underway in the research and development Exploratory Action. The report identifies the key issues, associated requirements and options, and…

A review of technology and safety aspects of erbium lasers in dentistry.

PubMed

Clarkson, D M

2001-01-01

This article reviews aspects of the probable mechanisms used by erbium dental lasers for cutting dentine and enamel, describes key issues of the risk of temperature elevation and speed of cutting relative to conventional techniques and looks at issues concerned with the safety of lasers.

Technological Innovations and Intervention Practices for Children with Cochlear Implants.

ERIC Educational Resources Information Center

Ertmer, David J.

2002-01-01

This epilogue to a forum on children with hearing impairments who have cochlear implants discusses innovation in implant technology and considers intervention issues. Key factors influencing outcomes are discussed, including educational programming, amount and length of communication intervention, and the targeting of both developmental and…

Space Transportation Propulsion Technology Symposium. Volume 3: Panel Session Summaries and Presentations

NASA Technical Reports Server (NTRS)

1991-01-01

The Space Transportation Propulsion Technology Symposium was held at the Pennsylvania State University on June 25 to 29, 1990. Emphasis was placed on propulsion requirements and initiatives to support current, next generation, and future space transportation systems, with the primary objectives of discerning whether proposed designs truly meet future transportation needs and identifying possible technology gaps, overlaps and other programmatic deficiencies. Key space transportation propulsion issues are addressed through four panels with government, industry, and academia membership. The panel focused on systems engineering and integration; development, manufacturing, and certification; operational efficiency; program development; and cultural issues.

Space Transportation Propulsion Technology Symposium. Volume 2: Symposium proceedings

NASA Technical Reports Server (NTRS)

1991-01-01

The Space Transportation Propulsion Symposium was held to provide a forum for communication within the propulsion technology developer and user communities. Emphasis was placed on propulsion requirements and initiatives to support current, next generation, and future space transportation systems, with the primary objectives of discerning whether proposed designs truly meet future transportation needs and identifying possible technology gaps, overlaps, and other programmatic deficiencies. Key space transportation propulsion issues were addressed through four panels with government, industry, and academia membership. The panels focused on systems engineering and integration; development, manufacturing and certification; operational efficiency; and program development and cultural issues.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

This report contains papers on the following topics: NREN Security Issues: Policies and Technologies; Layer Wars: Protect the Internet with Network Layer Security; Electronic Commission Management; Workflow 2000 - Electronic Document Authorization in Practice; Security Issues of a UNIX PEM Implementation; Implementing Privacy Enhanced Mail on VMS; Distributed Public Key Certificate Management; Protecting the Integrity of Privacy-enhanced Electronic Mail; Practical Authorization in Large Heterogeneous Distributed Systems; Security Issues in the Truffles File System; Issues surrounding the use of Cryptographic Algorithms and Smart Card Applications; Smart Card Augmentation of Kerberos; and An Overview of the Advanced Smart Card Access Control System.more » Selected papers were processed separately for inclusion in the Energy Science and Technology Database.« less

Disaster Mental Health and Positive Psychology-Considering the Context of Natural and Technological Disasters: An Introduction to the Special Issue.

PubMed

Schulenberg, Stefan E

2016-12-01

This article serves as an introduction to the Journal of Clinical Psychology's special issue on disaster mental health and positive psychology. The special issue comprises two sections. The first section presents a series of data-driven articles and research-informed reviews examining meaning and resilience in the context of natural and technological disasters. The second section presents key topics in the area of disaster mental health, with particular relevance for positive psychology and related frameworks. The special issue is intended to bridge the gap between these two areas of applied science, with the audience being experienced clinicians or clinicians in training. © 2016 Wiley Periodicals, Inc.

HSCT noise reduction technology development at GE Aircraft Engines

NASA Technical Reports Server (NTRS)

Majjigi, Rudramuni K.

1992-01-01

The topics covered include the following: High Speed Civil Transport (HSCT) exhaust nozzle design approaches; GE aircraft engine (GEAE) HSCT acoustics research; 2DCD non-IVP suppressor ejector; key sensitivities from reference aircraft; acoustic experiments; aero-mixing experimental set-up; fluid shield nozzle; HSCT Mach 2.4 flade nozzle; noise prediction; nozzle concept for GE/Boeing joint test; scale model hot core flow path modified to prevent hub-choking CFL3-D solution; HSCT exhaust nozzle status; and key acoustic technology issues for HSCT's.

HSCT noise reduction technology development at GE Aircraft Engines

NASA Astrophysics Data System (ADS)

Majjigi, Rudramuni K.

1992-04-01

The topics covered include the following: High Speed Civil Transport (HSCT) exhaust nozzle design approaches; GE aircraft engine (GEAE) HSCT acoustics research; 2DCD non-IVP suppressor ejector; key sensitivities from reference aircraft; acoustic experiments; aero-mixing experimental set-up; fluid shield nozzle; HSCT Mach 2.4 flade nozzle; noise prediction; nozzle concept for GE/Boeing joint test; scale model hot core flow path modified to prevent hub-choking CFL3-D solution; HSCT exhaust nozzle status; and key acoustic technology issues for HSCT's.

Making the audience a key participant in the science communication process.

PubMed

Rogers, C L

2000-10-01

The public communication of science and technology has become increasingly important over the last several decades. However, understanding the audience that receives this information remains the weak link in the science communication process. This essay provides a brief review of some of the issues involved, discusses results from an audience-based study, and suggests some strategies that both scientists and journalists can use to modify media coverage in ways that can help audiences better understand major public issues that involve science and technology.

Pretreatment of woody biomass for biofuel production: energy efficiency, technologies, and recalcitrance

Treesearch

J.Y. Zhu; Xuejun Pan; Ronald S. Jr. Zalesny

2010-01-01

This mini review discusses several key technical issues associated with cellulosic ethanol production from woody biomass: energy consumption for woody biomass pretreatment, pretreatment energy efficiency, woody biomass pretreatment technologies, and quantification of woody biomass recalcitrance. Both total sugar yield and pretreatment energy efficiency, defined as the...

Framing Pre-Service Teachers' Professional Learning Using Web2.0 Tools: Positioning Pre-Service Teachers as Agents of Cultural and Technological Change

ERIC Educational Resources Information Center

Kidd, Warren

2013-01-01

This article addresses key issues in pre-service teachers' professional learning. The argument explores pre-service teachers' learning and practice, which is both informed by technology and which uses technologically enhanced practices in classrooms as learning and teaching strategies. The article is contextualized by current…

Exoskeleton for Soldier Enhancement Systems Feasibility Study

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jansen, J.F.

2000-09-28

The development of a successful exoskeleton for human performance augmentation (EHPA) will require a multi-disciplinary systems approach based upon sound biomechanics, power generation and actuation systems, controls technology, and operator interfaces. The ability to integrate key components into a system that enhances performance without impeding operator mobility is essential. The purpose of this study and report are to address the issue of feasibility of building a fieldable EHPA. Previous efforts, while demonstrating progress and enhancing knowledge, have not approached the level required for a fully functional, fieldable system. It is doubtless that the technologies required for a successful exoskeleton havemore » advanced, and some of them significantly. The question to be addressed in this report is have they advanced to the point of making a system feasible in the next three to five years? In this study, the key technologies required to successfully build an exoskeleton have been examined. The primary focus has been on the key technologies of power sources, actuators, and controls. Power sources, including internal combustion engines, fuel cells, batteries, super capacitors, and hybrid sources have been investigated and compared with respect to the exoskeleton application. Both conventional and non-conventional actuator technologies that could impact EHPA have been assessed. In addition to the current state of the art of actuators, the potential for near-term improvements using non-conventional actuators has also been addressed. Controls strategies, and their implication to the design approach, and the exoskeleton to soldier interface have also been investigated. In addition to these key subsystems and technologies, this report addresses technical concepts and issues relating to an integrated design. A recommended approach, based on the results of the study is also presented.« less

University Interdisciplinary Research Organizations in the Process of Collaborative Innovation: Advantages, Difficulties and Strategies

ERIC Educational Resources Information Center

Bi Ying; Yang, Liansheng

2015-01-01

Under the background of collaborative innovation, interdisciplinary research organizations due to its structural advantages should actively target frontier science and the great needs of national development, key research and strategic issues of solving the country's need, prospective issues in the frontier of science and technology and major…

Introduction to the Special Issue on "Advances in Research on Networked Learning."

ERIC Educational Resources Information Center

Banks, Sheena; Goodyear, Peter; Hodgson, Vivian; McConnell, David

2003-01-01

Taken together, the articles in this special issue contribute to the collective sense of recent progress in research on networked learning in higher education. In combination, they help explain some of the key relationships between teachers' and learners' intentions and experiences, the affordances of text-based communications technologies and…

Key Technologies of Phone Storage Forensics Based on ARM Architecture

NASA Astrophysics Data System (ADS)

Zhang, Jianghan; Che, Shengbing

2018-03-01

Smart phones are mainly running Android, IOS and Windows Phone three mobile platform operating systems. The android smart phone has the best market shares and its processor chips are almost ARM software architecture. The chips memory address mapping mechanism of ARM software architecture is different with x86 software architecture. To forensics to android mart phone, we need to understand three key technologies: memory data acquisition, the conversion mechanism from virtual address to the physical address, and find the system’s key data. This article presents a viable solution which does not rely on the operating system API for a complete solution to these three issues.

Low Gravity Issues of Deep Space Refueling

NASA Technical Reports Server (NTRS)

Chato, David J.

2005-01-01

This paper discusses the technologies required to develop deep space refueling of cryogenic propellants and low cost flight experiments to develop them. Key technologies include long term storage, pressure control, mass gauging, liquid acquisition, and fluid transfer. Prior flight experiments used to mature technologies are discussed. A plan is presented to systematically study the deep space refueling problem and devise low-cost experiments to further mature technologies and prepare for full scale flight demonstrations.

Research and Development initiative of Satellite Technology Application for Environmental Issues in Asia Region

NASA Astrophysics Data System (ADS)

Hamamoto, K.; Kaneko, Y.; Sobue, S.; Oyoshi, K.

2016-12-01

Climate change and human activities are directly or indirectly influence the acceleration of environmental problems and natural hazards such as forest fires, drought and floods in the Asia-Pacific countries. Satellite technology has become one of the key information sources in assessment, monitoring and mitigation of these hazards and related phenomenon. However, there are still gaps between science and application of space technology in practical usage. Asia-Pacific Regional Space Agency Forum (APRSAF) recommended to initiate the Space Applications for Environment (SAFE) proposal providing opportunity to potential user agencies in the Asia Pacific region to develop prototype applications of space technology for number of key issues including forest resources management, coastal monitoring and management, agriculture and food security, water resource management and development user-friendly tools for application of space technology. The main activity of SAFE is SAFE prototyping. SAFE prototyping is a demonstration for end users and decision makers to apply space technology applications for solving environmental issues in Asia-Pacific region. By utilizing space technology and getting technical support by experts, prototype executers can develop the application system, which could support decision making activities. SAFE holds a workshop once a year. In the workshop, new prototypes are approved and the progress of on-going prototypes are confirmed. Every prototype is limited for two years period and all activities are operated by volunteer manner. As of 2016, 20 prototypes are completed and 6 prototypes are on-going. Some of the completed prototypes, for example drought monitoring in Indonesia were applied to operational use by a local official organization.

The Importance of Technology Readiness in NASA Earth Venture Missions

NASA Technical Reports Server (NTRS)

Wells, James E.; Komar, George J.

2009-01-01

The first set of Venture-class investigations share the characteristic that the technology should be mature and all investigations must use mature technology that has been modeled or demonstrated in a relevant environment (Technology Readiness Level (TRL) >5). Technology Readiness Levels are a systematic metric/measurement system that supports assessments of the maturity of a particular technology and the consistent comparison of maturity between different types of technology. The TRL is used in NASA technology planning. A major step in the level of fidelity of the technology demonstration follows the completion of TRL 5. At TRL 6, a system or subsystem model or prototype must be demonstrated in a relevant environment (ground or space) representative model or prototype system or system, which would go well beyond ad hoc, "patch-cord," or discrete component level breadboarding. These TRL levels are chosen as target objectives for the Program. The challenge for offerors is that they must identify key aspects (uncertainty, multi subsystem complexity, etc) of the TRL estimate that should be properly explained in a submitted proposal. Risk minimization is a key component of the Earth Venture missions. Experiences of prior airborne missions will be shared. The discussion will address aspects of uncertainty and issues surrounding three areas of airborne earth science missions: (1) Aircraft or proposed flight platform -- Expressing the capability of the aircraft in terms of the supporting mission requirements. These issues include airplane performance characteristics (duration, range, altitude, among others) and multiship complexities. (2) Instruments -- Establishing that the instruments have been demonstrated in a relevant environment. Instruments with heritage in prior space missions meet this requirement, as do instruments tested on the ground. Evidence that the instruments have demonstrated the ability to collect data as advertised will be described. The complexity of the integration of multiple subsystems will also be addressed. Issues associated with tailoring the instrument to meet the specific Venture mission objectives must be thoroughly explained and justified. (3) Aircraft/Instrument Integration -- Explicitly defining what development may be required to harden the instrument and integrate the instrument. The challenges associated with this key aspect of major airborne earth science investigations will be presented.

Examining hydrogen transitions.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Plotkin, S. E.; Energy Systems

2007-03-01

This report describes the results of an effort to identify key analytic issues associated with modeling a transition to hydrogen as a fuel for light duty vehicles, and using insights gained from this effort to suggest ways to improve ongoing modeling efforts. The study reported on here examined multiple hydrogen scenarios reported in the literature, identified modeling issues associated with those scenario analyses, and examined three DOE-sponsored hydrogen transition models in the context of those modeling issues. The three hydrogen transition models are HyTrans (contractor: Oak Ridge National Laboratory), MARKAL/DOE* (Brookhaven National Laboratory), and NEMS-H2 (OnLocation, Inc). The goals ofmore » these models are (1) to help DOE improve its R&D effort by identifying key technology and other roadblocks to a transition and testing its technical program goals to determine whether they are likely to lead to the market success of hydrogen technologies, (2) to evaluate alternative policies to promote a transition, and (3) to estimate the costs and benefits of alternative pathways to hydrogen development.« less

Feasibility Study of a Satellite Solar Power Station

NASA Technical Reports Server (NTRS)

Glaser, P. E.; Maynard, O. E.; Mackovciak, J. J. R.; Ralph, E. I.

1974-01-01

A feasibility study of a satellite solar power station (SSPS) was conducted to: (1) explore how an SSPS could be flown and controlled in orbit; (2) determine the techniques needed to avoid radio frequency interference (RFI); and (3) determine the key environmental, technological, and economic issues involved. Structural and dynamic analyses of the SSPS structure were performed, and deflections and internal member loads were determined. Desirable material characteristics were assessed and technology developments identified. Flight control performance of the SSPS baseline design was evaluated and parametric sizing studies were performed. The study of RFI avoidance techniques covered (1) optimization of the microwave transmission system; (2) device design and expected RFI; and (3) SSPS RFI effects. The identification of key issues involved (1) microwave generation, transmissions, and rectification and solar energy conversion; (2) environmental-ecological impact and biological effects; and (3) economic issues, i.e., costs and benefits associated with the SSPS. The feasibility of the SSPS based on the parameters of the study was established.

Assessment and E-Learning: Current Issues and Future Trends

ERIC Educational Resources Information Center

Cowie, Neil; Sakui, Keiko

2015-01-01

This paper describes different ways in which digital technology can be used for language learning. It then identifies some key trends connecting assessment and technology in language learning and higher education: the use of automated systems to enhance traditional assessment practices; the use of Web 2.0 tools to facilitate new assessment…

Investigating Elementary School Students' Technology Acceptance by Applying Digital Game-Based Learning to Environmental Education

ERIC Educational Resources Information Center

Cheng, Yuh-Ming; Lou, Shi-Jer; Kuo, Sheng-Huang; Shih, Ru-Chu

2013-01-01

In order to improve and promote students' environmental knowledge, attitudes, and behaviour, integrating environmental education into the primary education curriculum has become a key issue for environmental education. For this reason, this study aimed to investigate elementary school students' acceptance of technology applying digital game-based…

Social Marketing and the "New" Technology: Proceedings of a Washington Roundtable (Washington, DC, March 25, 1998).

ERIC Educational Resources Information Center

Academy for Educational Development, Washington, DC.

This document examines some of the key issues raised during the second Washington Roundtable on Social Marketing, convened by the Academy for Educational Development (AED) in 1998. AED invited participants to examine whether the interactive technologies that are revolutionizing commercial marketing--personal computers, the Internet (especially the…

Identifying Employer Needs from Accounting Information Systems Programs

ERIC Educational Resources Information Center

Dillon, Thomas W.; Kruck, S. E.

2008-01-01

As the need for new hires with accounting and information technology knowledge increases, a new major in accounting information systems (AIS) has emerged. This new AIS degree is a hybrid of accounting concepts and common business subjects combined with key information technology issues. Employers were presented with 56 core content areas found in…

A Study of the Effects of Digital Learning on Learning Motivation and Learning Outcome

ERIC Educational Resources Information Center

Lin, Ming-Hung; Chen, Huang-Cheng; Liu, Kuang-Sheng

2017-01-01

In the modern society when intelligent mobile devices become popular, the Internet breaks through the restrictions on time and space and becomes a ubiquitous learning tool. Designing teaching activity for digital learning and flexibly applying technology tools are the key issues for current information technology integrated education. In this…

An Independent Scientific Assessment of Well Stimulation in California Volume III

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jane C.S. Long; Laura C. Feinstein; Birkholzer, Jens

This study is issued in three volumes. Volume I, issued in January 2015, describes how well stimulation technologies work, how and where operators deploy these technologies for oil and gas production in California, and where they might enable production in the future. Volume II, issued in July 2015, discusses how well stimulation could affect water, atmosphere, seismic activity, wildlife and vegetation, and human health. Volume II reviews available data, and identifies knowledge gaps and alternative practices that could avoid or mitigate these possible impacts. Volume III, this volume, presents case studies that assess environmental issues and qualitative risks for specificmore » geographic regions. The Summary Report summarizes key findings, conclusions and recommendations of all three volumes.« less

An Independent Scientific Assessment of Well Stimulation in California Volume II

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jane C.S. Long; Laura C. Feinstein; Corinne E. Bachmann

This study is issued in three volumes. Volume I, issued in January 2015, describes how well stimulation technologies work, how and where operators deploy these technologies for oil and gas production in California, and where they might enable production in the future. Volume II, the present volume, discusses how well stimulation could affect water, atmosphere, seismic activity, wildlife and vegetation, and human health. Volume II reviews available data, and identifies knowledge gaps and alternative practices that could avoid or mitigate these possible impacts. Volume III, also issued in July 2015, presents case studies that assess environmental issues and qualitative risksmore » for specific geographic regions. A final Summary Report summarizes key findings, conclusions and recommendations of all three volumes.« less

Impact of the Patient-Reported Outcomes Management Information System (PROMIS) upon the design and operation of multi-center clinical trials: a qualitative research study.

PubMed

Eisenstein, Eric L; Diener, Lawrence W; Nahm, Meredith; Weinfurt, Kevin P

2011-12-01

New technologies may be required to integrate the National Institutes of Health's Patient Reported Outcome Management Information System (PROMIS) into multi-center clinical trials. To better understand this need, we identified likely PROMIS reporting formats, developed a multi-center clinical trial process model, and identified gaps between current capabilities and those necessary for PROMIS. These results were evaluated by key trial constituencies. Issues reported by principal investigators fell into two categories: acceptance by key regulators and the scientific community, and usability for researchers and clinicians. Issues reported by the coordinating center, participating sites, and study subjects were those faced when integrating new technologies into existing clinical trial systems. We then defined elements of a PROMIS Tool Kit required for integrating PROMIS into a multi-center clinical trial environment. The requirements identified in this study serve as a framework for future investigators in the design, development, implementation, and operation of PROMIS Tool Kit technologies.

Impact of the Patient-Reported Outcomes Management Information System (PROMIS) upon the Design and Operation of Multi-center Clinical Trials: a Qualitative Research Study

PubMed Central

Diener, Lawrence W.; Nahm, Meredith; Weinfurt, Kevin P.

2013-01-01

New technologies may be required to integrate the National Institutes of Health’s Patient Reported Outcome Management Information System (PROMIS) into multi-center clinical trials. To better understand this need, we identified likely PROMIS reporting formats, developed a multi-center clinical trial process model, and identified gaps between current capabilities and those necessary for PROMIS. These results were evaluated by key trial constituencies. Issues reported by principal investigators fell into two categories: acceptance by key regulators and the scientific community, and usability for researchers and clinicians. Issues reported by the coordinating center, participating sites, and study subjects were those faced when integrating new technologies into existing clinical trial systems. We then defined elements of a PROMIS Tool Kit required for integrating PROMIS into a multi-center clinical trial environment. The requirements identified in this study serve as a framework for future investigators in the design, development, implementation, and operation of PROMIS Tool Kit technologies. PMID:20703765

High-κ/Metal Gate Science and Technology

NASA Astrophysics Data System (ADS)

Guha, Supratik; Narayanan, Vijay

2009-08-01

High-κ/metal gate technology is on the verge of replacing conventional oxynitride dielectrics in state-of-the-art transistors for both high-performance and low-power applications. In this review we discuss some of the key materials issues that complicated the introduction of high-κ dielectrics, including reduced electron mobility, oxygen-based thermal instabilities, and the absence of thermally stable dual-metal electrodes. We show that through a combination of materials innovations and engineering ingenuity these issues were successfully overcome, thereby paving the way for high-κ/metal gate implementation.

Technology in New York's Classrooms: One Key To Improving Educational Outcomes.

ERIC Educational Resources Information Center

Public Policy Inst., Albany, NY.

This report discusses the potential for computers and other educational technologies to aid in school restructuring in New York State. Issues involved in such a restructuring are examined and include: (1) the need for a common effort in creating a state program; (2) current practices and current realities in the classroom; (3) current uses of such…

The Internet and the Law: What Educators Need To Know.

ERIC Educational Resources Information Center

Conn, Kathleen

This book discusses the key legal issues public schools face in using the World Wide Web, e-mail, and other computer technologies. Chapter 1 covers the foundations of school Internet law, including Supreme Court decisions, the legal standard of conduct, standards for technology literacy, and federal vs. state law. Chapter 2 discusses freedom of…

Distance Learning in the 21st Century University: Key Issues for Leaders and Faculty

ERIC Educational Resources Information Center

Amirault, Ray J.

2012-01-01

The changes precipitated by today's computer-based technologies are perhaps no more keenly felt than in the field of education, where technological innovation signals fundamental transformations in the manner in which educational programs will be delivered to 21st century students. Online learning is providing higher education institutions with an…

Dancing with the Web: Students Bring Meaning to the Semantic Web

ERIC Educational Resources Information Center

Brooks, Pauline

2012-01-01

This article will discuss the issues concerning the storage, retrieval and use of multimedia technology in dance, and how semantic web technologies can support those requirements. It will identify the key aims and outcomes of four international telematic dance projects, and review the use of reflective practice to engage students in their learning…

"Completely empowering": A qualitative study of the impact of technology on the wilderness experience in New Zealand

Treesearch

John D. Shultis

2015-01-01

Recent academic literature has expressed concern over the potential impact of the increasing types and levels of electronic (largely communication-related) technology brought by visitors into the wilderness. A key issue has been perceived changes in risktaking behavior by wilderness and backcountry users. Despite these concerns, extremely limited empirical assessment...

ADMET biosensors: up-to-date issues and strategies.

PubMed

Fang, Yan; Offenhaeusser, Andrease

2004-12-01

This insight review introduces the new concepts, theories, technology, instruments, frontier issues, and key strategies of ADMET (absorption, distribution, metabolism, elimination, and toxicity) biosensors, from the fermi to the quantum levels. Information about ADMET, originating from one author's invention, a patented pharmacotherapy for rescuing cardio-cerebral vascular stunning and regulating vascular endothelial growth-factor signaling at the post-genomic level, can be detected by a new generation of ADMET biosensor. This is a single-cell/single-molecule field-effect transistor (FET) hybrid system, where single molecules or single cells are assembled at the FET surface in a high density array manner via complementary metal-oxide-semiconductor (CMOS)-compatible technologies. Within a given nanometer distance, ADMET-mediated oxidation-reduction (redox) potentials, electrochemistry responses, and electron transfer processes can be simultaneously and directly probed by the gates of field-effect transistor arrays. The nanometer details of the functional coupling principles and characterization technologies of DNA single-molecule/single-cell FETs, as well as the design of lab-on-a-chip instruments, are indicated. Four frontier issues and key strategies are elucidated in detail. This can lead to innovative technology for high-throughout screening of labs-on-chips to resolve the pharmaceutical industry's current bottleneck via novel, FET-based drug discovery and single-molecule/single-cell screening methods, which can bring about a pharmaceutical industry revolution in the 21st century.

Challenges in verification and validation of autonomous systems for space exploration

NASA Technical Reports Server (NTRS)

Brat, Guillaume; Jonsson, Ari

2005-01-01

Space exploration applications offer a unique opportunity for the development and deployment of autonomous systems, due to limited communications, large distances, and great expense of direct operation. At the same time, the risk and cost of space missions leads to reluctance to taking on new, complex and difficult-to-understand technology. A key issue in addressing these concerns is the validation of autonomous systems. In recent years, higher-level autonomous systems have been applied in space applications. In this presentation, we will highlight those autonomous systems, and discuss issues in validating these systems. We will then look to future demands on validating autonomous systems for space, identify promising technologies and open issues.

A New Frontier: The National Information Infrastructure. Proceedings from the State-of-the-Art Institute (8th, Washington, D.C., November 3-4, 1994).

ERIC Educational Resources Information Center

Special Libraries Association, New York, NY.

These conference proceedings address the key issues relating to the National Information Infrastructure, including social policy, cultural issues, government policy, and technological applications. The goal is to provide the knowledge and resources needed to conceptualize and think clearly about this topic. Proceedings include: "Opening…

Trialing a Tablet PC Based Language Test

ERIC Educational Resources Information Center

Litzler, Mary Frances; Garcia Laborda, Jesus

2015-01-01

Designing tests is a sophisticated task due to issues such as rubrics, validation and impact. Delivery has become another key issue in recent years. Recent research projects in Spain (García Laborda et al.s, 2010, García Laborda, 2012; García Laborda et al., 2014; Bueno Alastuey et al., 2014) have been working mainly with technological devices as…

Technologies for Achieving Field Ubiquitous Computing

NASA Astrophysics Data System (ADS)

Nagashima, Akira

Although the term “ubiquitous” may sound like jargon used in information appliances, ubiquitous computing is an emerging concept in industrial automation. This paper presents the author's visions of field ubiquitous computing, which is based on the novel Internet Protocol IPv6. IPv6-based instrumentation will realize the next generation manufacturing excellence. This paper focuses on the following five key issues: 1. IPv6 standardization; 2. IPv6 interfaces embedded in field devices; 3. Compatibility with FOUNDATION fieldbus; 4. Network securities for field applications; and 5. Wireless technologies to complement IP instrumentation. Furthermore, the principles of digital plant operations and ubiquitous production to support the above key technologies to achieve field ubiquitous systems are discussed.

Advanced manufacturing: Technology and international competitiveness

DOE Office of Scientific and Technical Information (OSTI.GOV)

Tesar, A.

1995-02-01

Dramatic changes in the competitiveness of German and Japanese manufacturing have been most evident since 1988. All three countries are now facing similar challenges, and these challenges are clearly observed in human capital issues. Our comparison of human capital issues in German, Japanese, and US manufacturing leads us to the following key judgments: Manufacturing workforces are undergoing significant changes due to advanced manufacturing technologies. As companies are forced to develop and apply these technologies, the constituency of the manufacturing workforce (especially educational requirements, contingent labor, job content, and continuing knowledge development) is being dramatically and irreversibly altered. The new workforcemore » requirements which result due to advanced manufacturing require a higher level of worker sophistication and responsibility.« less

Conference Proceedings of NASA/DoD Control Structures Interaction Technology Held in Norfolk, Virginia on 18-21 November 1986. Part 2,

DTIC Science & Technology

1987-06-01

INDUSTRY JOINT ENDEAVOR AGREEMENTS o PRESENT CSI TECHNOLOGY SOA FOR KEY ISSUES o SPECIFIC CSI TECHNOLOGY PROGRAMS/TASKS o SCHEDULE - WHAT IS EXPECTED...RESULTS BE USED IN THIS REGARD? o WHAT ARE SELECTION CRITERIA FOR GUEST INVESTIGATORS? o WHAT IS CURRENT COFS SCHEDULE ? o ARE USERS AND TECHNOLOGY...build to cost and schedule , meeting both the presidentially mandated milestone for permanent manned presence in 1994 and the budget constraints placed

APA Summit on Medical Student Education Task Force on Informatics and Technology: learning about computers and applying computer technology to education and practice.

PubMed

Hilty, Donald M; Hales, Deborah J; Briscoe, Greg; Benjamin, Sheldon; Boland, Robert J; Luo, John S; Chan, Carlyle H; Kennedy, Robert S; Karlinsky, Harry; Gordon, Daniel B; Yager, Joel; Yellowlees, Peter M

2006-01-01

This article provides a brief overview of important issues for educators regarding medical education and technology. The literature describes key concepts, prototypical technology tools, and model programs. A work group of psychiatric educators was convened three times by phone conference to discuss the literature. Findings were presented to and input was received from the 2005 Summit on Medical Student Education by APA and the American Directors of Medical Student Education in Psychiatry. Knowledge of, skills in, and attitudes toward medical informatics are important to life-long learning and modern medical practice. A needs assessment is a starting place, since student, faculty, institution, and societal factors bear consideration. Technology needs to "fit" into a curriculum in order to facilitate learning and teaching. Learning about computers and applying computer technology to education and clinical care are key steps in computer literacy for physicians.

DARPA Concurrent Design/Concurrent Engineering Workshop Held in Key West, Florida on December 6-8, 1988

DTIC Science & Technology

1988-12-01

engineering disciplines. (Here I refer to training in multifunction team mana ement dir’lplines, quality engineering methods, experimental design by such...4001 SSOME ISSUES S• View of strategic issues has been evolving - Speed of design and product deployment - to accelerate experimentation with new...manufacturingprocess design n New technologies (e.g., composites) which can revolutionize prod-uct technical design in some cases Issue still to be faced: " non

Development of inexpensive blood imaging systems: where are we now?

PubMed

Chu, Kaiqin; Smith, Zachary J; Wachsmann-Hogiu, Sebastian

2015-01-01

Clinical applications in the developing world, such as malaria and anemia diagnosis, demand a change in the medical paradigm of expensive care given in central locations by highly trained professionals. There has been a recent explosion in optical technologies entering the consumer market through the widespread adoption of smartphones and LEDs. This technology commoditization has enabled the development of small, portable optical imaging systems at an unprecedentedly low cost. Here, we review the state-of-the-field of the application of these systems for low-cost blood imaging with an emphasis on cellular imaging systems. In addition to some promising results addressing specific clinical issues, an overview of the technology landscape is provided. We also discuss several key issues that need to be addressed before these technologies can be commercialized.

Identification of crew-systems interactions and decision related trends

DOT National Transportation Integrated Search

2013-05-01

National Aeronautics and Space Administration (NASA) Vehicle System Safety Technology (VSST) project management uses systems analysis to identify key issues and maintain a portfolio of research leading to potential solutions to its three identified t...

Using Future Trends to Inform Planning/Marketing.

ERIC Educational Resources Information Center

Nichols, John V.

1995-01-01

Explores the reasons for incorporating trend analysis of librarianship into library planning and marketing. Key financial and technological issues are reviewed, and the techniques of environmental scanning and alternative scenario-building to incorporate future trends are discussed. (AEF)

Lay and professional stakeholder involvement in scoping palliative care issues: Methods used in seven European countries.

PubMed

Brereton, Louise; Ingleton, Christine; Gardiner, Clare; Goyder, Elizabeth; Mozygemba, Kati; Lysdahl, Kristin Bakke; Tummers, Marcia; Sacchini, Dario; Leppert, Wojciech; Blaževičienė, Aurelija; van der Wilt, Gert Jan; Refolo, Pietro; De Nicola, Martina; Chilcott, James; Oortwijn, Wija

2017-02-01

Stakeholders are people with an interest in a topic. Internationally, stakeholder involvement in palliative care research and health technology assessment requires development. Stakeholder involvement adds value throughout research (from prioritising topics to disseminating findings). Philosophies and understandings about the best ways to involve stakeholders in research differ internationally. Stakeholder involvement took place in seven countries (England, Germany, Italy, Lithuania, the Netherlands, Norway and Poland). Findings informed a project that developed concepts and methods for health technology assessment and applied these to evaluate models of palliative care service delivery. To report on stakeholder involvement in the INTEGRATE-HTA project and how issues identified informed project development. Using stakeholder consultation or a qualitative research design, as appropriate locally, stakeholders in seven countries acted as 'advisors' to aid researchers' decision making. Thematic analysis was used to identify key issues across countries. A total of 132 stakeholders (82 professionals and 50 'lay' people) aged ⩾18 participated in individual face-to-face or telephone interviews, consultation meetings or focus groups. Different stakeholder involvement methods were used successfully to identify key issues in palliative care. A total of 23 issues common to three or more countries informed decisions about the intervention and comparator of interest, sub questions and specific assessments within the health technology assessment. Stakeholders, including patients and families undergoing palliative care, can inform project decision making using various involvement methods according to the local context. Researchers should consider local understandings about stakeholder involvement as views of appropriate and feasible methods vary. Methods for stakeholder involvement, especially consultation, need further development.

Facing the Challenges--Using Information and Communications Technology To Support Teaching and Learning.

ERIC Educational Resources Information Center

Heaney, Liam

2003-01-01

This article explores some of the key issues associated with the use of information and communications technology (ICT) in the classroom. To illustrate ICT integration, a teaching project on dinosaurs, which has been developed with students ages 10-11, is presented. A detailed scheme of work and lesson plans is included. (Contains 4 references.)…

Enabling the Future: Linking Science and Technology to Societal Goals. A Report.

ERIC Educational Resources Information Center

Carnegie Commission on Science, Technology, and Government, New York, NY.

This report seeks ways to improve the knowledge, understanding, and information available to the federal government on the long-term nature of the science and technology (S&T) enterprise as it relates to societal goals. The recommendations focus on a few key issues: improving the national capacity to define and revise long-term S&T goals; linking…

The Methodological Illumination of a Blind Spot: Information and Communication Technology and International Research Team Dynamics in a Higher Education Research Program

ERIC Educational Resources Information Center

Hoffman, David M.; Blasi, Brigida; Culum, Bojana; Dragšic, Žarko; Ewen, Amy; Horta, Hugo; Nokkala, Terhi; Rios-Aguilar, Cecilia

2014-01-01

This "self-ethnography" complements the other articles in this special issue by spotlighting a set of key challenges facing international research teams. The study is focused on the relationship between information and communication technology (ICT)-based collaboration and research team dynamics. Our diverse team, drawn from researchers…

Space Experiment Concepts: Cup-Burner Flame Extinguishment

NASA Technical Reports Server (NTRS)

Takahashi, Fumiaki

2004-01-01

Space Fire Suppression Processes & Technology. Space experiment concepts of cup-burner flame extinguishment have been conceived to address to the key issues (i.e., organizing questions) in space fire suppression. Cup-burner flame extinguishment experiment can reveal physical and chemical suppression processes and provide agent effectiveness data useful for technology development of space fire suppression systems in various reduced-gravity platforms.

Electrical actuation technology bridging, volume 1

NASA Astrophysics Data System (ADS)

Hammond, Monica S.; Doane, George B., III

1993-01-01

This document contains the proceedings from the conference. The workshop addressed key technologies bridging the entire field of electrical actuation including systems methodology, control electronics, power source systems, reliability, maintainability, and vehicle health management with special emphasis on thrust vector control (TVC) applications on NASA launch vehicles. Speakers were drawn primarily from industry with participation from universities and government. In addition, prototype hardware demonstrations were held at the MSFC Propulsion Laboratory each afternoon. Splinter sessions held on the final day afforded the opportunity to discuss key issues and to provide overall recommendations. Presentations are included in this document.

Toward an Informatics Research Agenda

PubMed Central

Kaplan, Bonnie; Brennan, Patricia Flatley; Dowling, Alan F.; Friedman, Charles P.; Peel, Victor

2001-01-01

As we have advanced in medical informatics and created many impressive innovations, we also have learned that technologic developments are not sufficient to bring the value of computer and information technologies to health care systems. This paper proposes a model for improving how we develop and deploy information technology. The authors focus on trends in people, organizational, and social issues (POI/OSI), which are becoming more complex as both health care institutions and information technologies are changing rapidly. They outline key issues and suggest high-priority research areas. One dimension of the model concerns different organizational levels at which informatics applications are used. The other dimension draws on social science disciplines for their approaches to studying implications of POI/OSI in informatics. By drawing on a wide variety of research approaches and asking questions based in social science disciplines, the authors propose a research agenda for high-priority issues, so that the challenges they see ahead for informatics may be met better. PMID:11320068

Space-based solar power conversion and delivery systems study. Volume 3: Economic analysis of space-based solar power systems

NASA Technical Reports Server (NTRS)

Hazelrigg, G. A., Jr.

1976-01-01

A variety of economic and programmatic issues are discussed concerning the development and deployment of a fleet of space-based solar power satellites (SSPS). The costs, uncertainties and risks associated with the current photovoltaic SSPS configuration, and with issues affecting the development of an economically viable SSPS development program are analyzed. The desirability of a low earth orbit (LEO) demonstration satellite and a geosynchronous (GEO) pilot satellite is examined and critical technology areas are identified. In addition, a preliminary examination of utility interface issues is reported. The main focus of the effort reported is the development of SSPS unit production, and operation and maintenance cost models suitable for incorporation into a risk assessment (Monte Carlo) model (RAM). It is shown that the key technology area deals with the productivity of man in space, not, as might be expected, with some hardware component technology.

Key Technology Research on Open Architecture for The Sharing of Heterogeneous Geographic Analysis Models

NASA Astrophysics Data System (ADS)

Yue, S. S.; Wen, Y. N.; Lv, G. N.; Hu, D.

2013-10-01

In recent years, the increasing development of cloud computing technologies laid critical foundation for efficiently solving complicated geographic issues. However, it is still difficult to realize the cooperative operation of massive heterogeneous geographical models. Traditional cloud architecture is apt to provide centralized solution to end users, while all the required resources are often offered by large enterprises or special agencies. Thus, it's a closed framework from the perspective of resource utilization. Solving comprehensive geographic issues requires integrating multifarious heterogeneous geographical models and data. In this case, an open computing platform is in need, with which the model owners can package and deploy their models into cloud conveniently, while model users can search, access and utilize those models with cloud facility. Based on this concept, the open cloud service strategies for the sharing of heterogeneous geographic analysis models is studied in this article. The key technology: unified cloud interface strategy, sharing platform based on cloud service, and computing platform based on cloud service are discussed in detail, and related experiments are conducted for further verification.

Computer-Managed Instruction: Theory, Application, and Some Key Implementation Issues.

DTIC Science & Technology

1984-03-01

who have endorsed computer technology but fail to adopt it . As one educational consultant claims: "Educators appear to have a deep-set skepticism toward...widespread use. i-1 II. BACKGROUND A. HISTORICAL PERSPECTIVE In the mid-1950’s, while still in its infancy, computer technology entered the world of education...to utilize the new technology , and to do it most.. extensively. Implementation of CMI in a standalone configuration using microcomputers has been

Emerging technology: A key enabler for modernizing pharmaceutical manufacturing and advancing product quality.

PubMed

O'Connor, Thomas F; Yu, Lawrence X; Lee, Sau L

2016-07-25

Issues in product quality have produced recalls and caused drug shortages in United States (U.S.) in the past few years. These quality issues were often due to outdated manufacturing technologies and equipment as well as lack of an effective quality management system. To ensure consistent supply of safe, effective and high-quality drug products available to the patients, the U.S. Food and Drug Administration (FDA) supports modernizing pharmaceutical manufacturing for improvements in product quality. Specifically, five new initiatives are proposed here to achieve this goal. They include: (i) advancing regulatory science for pharmaceutical manufacturing; (ii) establishing a public-private institute for pharmaceutical manufacturing innovation; (iii) creating incentives for investment in the technological upgrade of manufacturing processes and facilities; (iv) leveraging external expertise for regulatory quality assessment of emerging technologies; and (v) promoting the international harmonization of approaches for expediting the global adoption of emerging technologies. Published by Elsevier B.V.

Workshop on Critical Issues in Microgravity Fluids, Transport, and Reaction Processes in Advanced Human Support Technology

NASA Technical Reports Server (NTRS)

Chiaramonte, Francis P.; Joshi, Jitendra A.

2004-01-01

This workshop was designed to bring the experts from the Advanced Human Support Technologies communities together to identify the most pressing and fruitful areas of research where success hinges on collaborative research between the two communities. Thus an effort was made to bring together experts in both advanced human support technologies and microgravity fluids, transport and reaction processes. Expertise was drawn from academia, national laboratories, and the federal government. The intent was to bring about a thorough exchange of ideas and develop recommendations to address the significant open design and operation issues for human support systems that are affected by fluid physics, transport and reaction processes. This report provides a summary of key discussions, findings, and recommendations.

Third NASA Workshop on Wiring for Space Applications

NASA Technical Reports Server (NTRS)

Hammoud, Ahmad (Compiler); Stavnes, Mark (Compiler)

1995-01-01

This workshop addressed key technology issues in the field of electrical power wiring for space applications, and transferred information and technology related to space wiring for use in government and commercial applications. Speakers from space agencies, U.S. Federal labs, industry, and academia presented program overviews and discussed topics on arc tracking phenomena, advancements in insulation materials and constructions, and new wiring system topologies.

Structured Approaches to Participatory Design for Children: Can Targeting the Needs of Children with Autism Provide Benefits for a Broader Child Population?

ERIC Educational Resources Information Center

Benton, Laura; Johnson, Hilary

2014-01-01

In the past technology products created to overcome accessibility and usability issues experienced by individuals with special needs have also resulted in greater usability for the wider population. Technology is increasingly being seen as a key component within the education of children with special needs and recently researchers have developed…

Industrial Waste Heat Recovery - Potential Applications, Available Technologies and Crosscutting R&D Opportunities

DOE Office of Scientific and Technical Information (OSTI.GOV)

Thekdi, Arvind; Nimbalkar, Sachin U.

2015-01-01

The purpose of this report was to explore key areas and characteristics of industrial waste heat and its generation, barriers to waste heat recovery and use, and potential research and development (R&D) opportunities. The report also provides an overview of technologies and systems currently available for waste heat recovery and discusses the issues or barriers for each. Also included is information on emerging technologies under development or at various stages of demonstrations, and R&D opportunities cross-walked by various temperature ranges, technology areas, and energy-intensive process industries.

Non-invasive prenatal diagnosis using cell-free fetal DNA technology: applications and implications.

PubMed

Hall, Alison; Bostanci, A; Wright, C F

2010-01-01

Cell-free fetal DNA and RNA circulating in maternal blood can be used for the early non-invasive prenatal diagnosis (NIPD) of an increasing number of genetic conditions, both for pregnancy management and to aid reproductive decision-making. Here we present a brief review of the scientific and clinical status of the technology, and an overview of key ethical, legal and social issues raised by the analysis of cell-free fetal DNA for NIPD. We suggest that the less invasive nature of the technology brings some distinctive issues into focus, such as the possibility of broader uptake of prenatal diagnosis and access to the technology directly by the consumer via the internet, which have not been emphasised in previous work in this area. We also revisit significant issues that are familiar from previous debates about prenatal testing. Since the technology seems to transect existing distinctions between screening and diagnostic tests, there are important implications for the form and process involved in obtaining informed consent or choice. This analysis forms part of the work undertaken by a multidisciplinary group of experts which made recommendations about the implementation of this technology within the UK National Health Service. Copyright 2010 S. Karger AG, Basel.

Vocational Psychology: An Analysis and Directions for the Future.

ERIC Educational Resources Information Center

Russell, Joyce E. A.

2001-01-01

Key areas of future research in vocational psychology include changing organizational structures, changing career attitudes, diversity of career development opportunities, international focus, increasing diversity, changing nature of technology, evolving educational systems, increased entrepreneurship, work and family issues, and career-leisure…

Key issues on ITS deployment and evaluation : KOCHI 2001 Plan and KoCoRo

DOT National Transportation Integrated Search

2000-11-09

Presentation at the International Workshop on ITS benefits held Thursday, November 9, 2000, Madrid Room, Lingotto Centre, Turin, Italy. The KOCHI prefecture offers a new lifestyle in rural regions using information technologies, and conducts experime...

Impact of biotechnology on sugarcane agriculture and industry

USDA-ARS?s Scientific Manuscript database

There are nine key issues that can influence the productivity and sustainability of the sugarcane industry. These include land, soil fertility, water, variety, planting density, crop protection, cultural practices, harvesting and processing, and information technology. To all sugarcane farmers, it r...

Numerical simulation of intelligent compaction technology for construction quality control.

DOT National Transportation Integrated Search

2015-02-01

For eciently updating models of large-scale structures, the response surface (RS) method based on radial basis : functions (RBFs) is proposed to model the input-output relationship of structures. The key issues for applying : the proposed method a...

Redox flow cell development and demonstration project, calendar year 1976

NASA Technical Reports Server (NTRS)

1977-01-01

The major focus of the effort was the key technology issues that directly influence the fundamental feasibility of the overall redox concept. These issues were the development of a suitable semipermeable separator membrane for the system, the screening and study of candidate redox couples to achieve optimum cell performance, and the carrying out of systems analysis and modeling to develop system performance goals and cost estimates.

The quest for engaging AmI: Patient engagement and experience design tools to promote effective assisted living.

PubMed

Triberti, Stefano; Barello, Serena

2016-10-01

Recent research highlights that patient engagement, conceived as a patient's behavioral, cognitive and emotional commitment to his own care management, is a key issue while implementing new technologies in the healthcare process. Indeed, eHealth interventions may systematically fail when the patient's subjective experience has not been taken into consideration since the first steps of the technology design. In the present contribution, we argue that such an issue is more and more crucial as regarded to the field of Ambient Intelligence (AmI). Specifically, the exact concept of technologies embedded in the patients' surrounding environment implies a strong impact on their everyday life, which can be perceived as a limitation to autonomy and privacy, and therefore refused or even openly opposed by the final users. The present contribution tackles this issue directly, highlighting: (1) a theoretical framework to include patient engagement in the design of AmI technologies; (2) assessment measures for patient engagement while developing and testing the effectiveness of AmI prototypes for healthcare. Finally (3) this contribution provides an overview of the main issues emerging while implementing AmI technologies and suggests specific design solutions to address them. Copyright © 2016 Elsevier Inc. All rights reserved.

"Let Me Keep My Dead Husband's Sperm": Ethical Issues in Posthumous Reproduction.

PubMed

Panagiotopoulou, Nikoletta; Karavolos, Stamatios

2015-01-01

The feasibility of posthumous reproduction when the surviving partner is female has brought to light many ethical, moral, social, and legal issues. This review aims to summarize these issues and to assist clinicians who may be faced with such requests. A question list, used for health technologies assessment, was utilized in a question-answer approach as the review methodology. Of the 1,208 publications identified through a comprehensive literature search in biomedical, psychological, and ethical databases, 31 articles included arguments related to one or more questions from the predefined question set. Key stakeholders identified include the deceased, the requesting party, the resultant child, the physician, and society. Key ethical issues relevant to posthumous reproduction include the four traditional pillars of medical ethics--autonomy, beneficence, nonmaleficence, justice--as well as the stakeholders' rights and sociocultural attitudes. The ethical framework formulated by these issues has been incorporated in a clinical ethics decision-making tool that could prove useful to clinicians and decision makers. Copyright 2015 The Journal of Clinical Ethics. All rights reserved.

Mg-Ca Alloys Produced by Reduction of CaO: Understanding of ECO-Mg Alloy Production

NASA Astrophysics Data System (ADS)

Jung, In-Ho; Lee, Jin Kyu; Kim, Shae K.

2017-04-01

There have been long debates about the environment conscious (ECO) Mg technology which utilizes CaO to produce Ca-containing Mg alloys. Two key process technologies of the ECO-Mg process are the chemical reduction of CaO by liquid Mg and the maintenance of melt cleanliness during the alloying of Ca. Thermodynamic calculations using FactSage software were performed to explain these two key issues. In addition, an experimental study was performed to compare the melt cleanliness of the Ca-containing Mg alloys produced by the conventional route with metallic Ca and the ECO-Mg route with CaO.

Iris Cryptography for Security Purpose

NASA Astrophysics Data System (ADS)

Ajith, Srighakollapu; Balaji Ganesh Kumar, M.; Latha, S.; Samiappan, Dhanalakshmi; Muthu, P.

2018-04-01

In today's world, the security became the major issue to every human being. A major issue is hacking as hackers are everywhere, as the technology was developed still there are many issues where the technology fails to meet the security. Engineers, scientists were discovering the new products for security purpose as biometrics sensors like face recognition, pattern recognition, gesture recognition, voice authentication etcetera. But these devices fail to reach the expected results. In this work, we are going to present an approach to generate a unique secure key using the iris template. Here the iris templates are processed using the well-defined processing techniques. Using the encryption and decryption process they are stored, traversed and utilized. As of the work, we can conclude that the iris cryptography gives us the expected results for securing the data from eavesdroppers.

Choosing a CD-ROM Network Solution.

ERIC Educational Resources Information Center

Doering, David

1996-01-01

Discusses issues to consider in selecting a CD-ROM network solution, including throughput (speed of data delivery), security, access, servers, key features, training, jukebox support, documentation, and licenses. Reviews software products offered by Novell, Around Technology, Micro Design, Smart Storage, Microtest, Meridian, CD-Connection,…

The innovation process centre stage.

PubMed

2005-09-01

London's Olympia 2 was the venue for the first Medical Device Technology Innovation Forum. The event was characterised by dialogue and discussion that explored the key issues involved in delivering clinical need through innovative products to the end user. Highlights of the event are reported here.

E-DECIDER Disaster Response and Decision Support Cyberinfrastructure: Technology and Challenges

NASA Astrophysics Data System (ADS)

Glasscoe, M. T.; Parker, J. W.; Pierce, M. E.; Wang, J.; Eguchi, R. T.; Huyck, C. K.; Hu, Z.; Chen, Z.; Yoder, M. R.; Rundle, J. B.; Rosinski, A.

2014-12-01

Timely delivery of critical information to decision makers during a disaster is essential to response and damage assessment. Key issues to an efficient emergency response after a natural disaster include rapidly processing and delivering this critical information to emergency responders and reducing human intervention as much as possible. Essential elements of information necessary to achieve situational awareness are often generated by a wide array of organizations and disciplines, using any number of geospatial and non-geospatial technologies. A key challenge is the current state of practice does not easily support information sharing and technology interoperability. NASA E-DECIDER (Emergency Data Enhanced Cyber-Infrastructure for Disaster Evaluation and Response) has worked with the California Earthquake Clearinghouse and its partners to address these issues and challenges by adopting the XChangeCore Web Service Data Orchestration technology and participating in several earthquake response exercises. The E-DECIDER decision support system provides rapid delivery of advanced situational awareness data products to operations centers and emergency responders in the field. Remote sensing and hazard data, model-based map products, information from simulations, damage detection, and crowdsourcing is integrated into a single geospatial view and delivered through a service oriented architecture for improved decision-making and then directly to mobile devices of responders. By adopting a Service Oriented Architecture based on Open Geospatial Consortium standards, the system provides an extensible, comprehensive framework for geospatial data processing and distribution on Cloud platforms and other distributed environments. While the Clearinghouse and its partners are not first responders, they do support the emergency response community by providing information about the damaging effects earthquakes. It is critical for decision makers to maintain a situational awareness that is knowledgeable of potential and current conditions, possible impacts on populations and infrastructure, and other key information. E-DECIDER and the Clearinghouse have worked together to address many of these issues and challenges to deliver interoperable, authoritative decision support products.

Electrical Actuation Technology Bridging

NASA Technical Reports Server (NTRS)

Hammond, Monica (Compiler); Sharkey, John (Compiler)

1993-01-01

This document contains the proceedings of the NASA Electrical Actuation Technology Bridging (ELA-TB) Workshop held in Huntsville, Alabama, September 29-October 1, 1992. The workshop was sponsored by the NASA Office of Space Systems Development and Marshall Space Flight Center (MSFC). The workshop addressed key technologies bridging the entire field of electrical actuation including systems methodology, control electronics, power source systems, reliability, maintainability, and vehicle health management with special emphasis on thrust vector control (TVC) applications on NASA launch vehicles. Speakers were drawn primarily from industry with participation from universities and government. In addition, prototype hardware demonstrations were held at the MSFC Propulsion Laboratory each afternoon. Splinter sessions held on the final day afforded the opportunity to discuss key issues and to provide overall recommendations. Presentations are included in this document.

Electrical Actuation Technology Bridging

NASA Astrophysics Data System (ADS)

Hammond, Monica; Sharkey, John

1993-05-01

This document contains the proceedings of the NASA Electrical Actuation Technology Bridging (ELA-TB) Workshop held in Huntsville, Alabama, September 29-October 1, 1992. The workshop was sponsored by the NASA Office of Space Systems Development and Marshall Space Flight Center (MSFC). The workshop addressed key technologies bridging the entire field of electrical actuation including systems methodology, control electronics, power source systems, reliability, maintainability, and vehicle health management with special emphasis on thrust vector control (TVC) applications on NASA launch vehicles. Speakers were drawn primarily from industry with participation from universities and government. In addition, prototype hardware demonstrations were held at the MSFC Propulsion Laboratory each afternoon. Splinter sessions held on the final day afforded the opportunity to discuss key issues and to provide overall recommendations. Presentations are included in this document.

Plant stress analysis technology deployment

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ebadian, M.A.

1998-01-01

Monitoring vegetation is an active area of laser-induced fluorescence imaging (LIFI) research. The Hemispheric Center for Environmental Technology (HCET) at Florida International University (FIU) is assisting in the transfer of the LIFI technology to the agricultural private sector through a market survey. The market survey will help identify the key eco-agricultural issues of the nations that could benefit from the use of sensor technologies developed by the Office of Science and Technology (OST). The principal region of interest is the Western Hemisphere, particularly, the rapidly growing countries of Latin America and the Caribbean. The analysis of needs will assure thatmore » the focus of present and future research will center on economically important issues facing both hemispheres. The application of the technology will be useful to the agriculture industry for airborne crop analysis as well as in the detection and characterization of contaminated sites by monitoring vegetation. LIFI airborne and close-proximity systems will be evaluated as stand-alone technologies and additions to existing sensor technologies that have been used to monitor crops in the field and in storage.« less

Technology transfer and other public policy implications of multi-national arrangements for the production of commercial airframes

NASA Technical Reports Server (NTRS)

Gellman, A. J.; Price, J. P.

1978-01-01

A study to examine the question of technology transfer through international arrangements for production of commercial transport aircraft is presented. The likelihood of such transfer under various representative conditions was determined and an understanding of the economic motivations for, effects of, joint venture arrangements was developed. Relevant public policy implications were also assessed. Multinational consortia with U.S. participation were focused upon because they generate the full range of pertinent public issues (including especially technology transfer), and also because of recognized trends toward such arrangements. An extensive search and analysis of existing literature to identify the key issues, and in-person interviews with executives of U.S. and European commercial airframe producers was reviewed. Distinctions were drawn among product-embodied, process, and management technologies in terms of their relative possibilities of transfer and the significance of such transfer. Also included are observations on related issues such as the implications of U.S. antitrust policy with respect to the formation of consortia and the competitive viability of the U.S. aircraft manufacturing industry.

Prospects for public participation on nuclear risks and policy options: innovations in governance practices for sustainable development in the European Union.

PubMed

O'Connor, M; van den Hove, S

2001-09-14

We outline the potential participative governance and risk management in application to technological choices in the nuclear sector within the European Union (EU). Well-conducted public participation, stakeholder consultation and deliberation procedures can enhance the policy process and improve the robustness of strategies dealing with high-stakes investment and risk management challenges. Key nuclear issues now confronting EU member states are: public concern with large-scale environmental and health issues; the Chernobyl accident (and others less catastrophic) whose effect has been to erode public confidence and trust in the nuclear sector; the maturity of the nuclear plant, hence the emerging prominence of waste transportation, reprocessing and disposal issues as part of historical liability within the EU; the nuclear energy heritage of central and eastern European candidate countries to EU accession. The obligatory management of inherited technological risks and uncertainties on large temporal and geographical scales, is a novel feature of technology assessment and governance. Progress in the nuclear sector will aid the development of methodologies for technological foresight and risk governance in fields other than the nuclear alone.

Recent Trends in Robotics Research

NASA Astrophysics Data System (ADS)

Ejiri, Masakazu

My views on recent trends in the strategy and practice of Japan's robotics research are briefly introduced. To meet ever-increasing public expectations, robotics researchers and engineers have to be more seriously concerned about robots' intrinsic weaknesses. Examples of these are power-related and reliability issues. Resolving these issues will increase the feasibility of creating successful new industry, and the likelihood of robotics becoming a key technology for providing a safe and stress-free society in the future.

Recent Developments in Smart Adaptive Structures for Solar Sailcraft

NASA Technical Reports Server (NTRS)

Whorton, M. S.; Kim, Y. K.; Oakley, J.; Adetona, O.; Keel, L. H.

2007-01-01

The "Smart Adaptive Structures for Solar Sailcraft" development activity at MSFC has investigated issues associated with understanding how to model and scale the subsystem and multi-body system dynamics of a gossamer solar sailcraft with the objective of designing sailcraft attitude control systems. This research and development activity addressed three key tasks that leveraged existing facilities and core competencies of MSFC to investigate dynamics and control issues of solar sails. Key aspects of this effort included modeling and testing of a 30 m deployable boom; modeling of the multi-body system dynamics of a gossamer sailcraft; investigation of control-structures interaction for gossamer sailcraft; and development and experimental demonstration of adaptive control technologies to mitigate control-structures interaction.

Technology Issues for Mobile Ka-band Communications

NASA Technical Reports Server (NTRS)

Satorius, E.; Jedrey, T.; Davarian, F.; Divsalar, D.

1993-01-01

The key to success of any future telecommunications System is its ability to provide many users with a diversity of services in a cost-effective manner. An important consideration is system capacity which is requred to suport a large pool of users and their varied demands.

Management and Leadership: A Dual Role in Nursing Education.

ERIC Educational Resources Information Center

Calpin-Davies, Philomena J.

2003-01-01

Caring is the end purpose of nursing. The management and leadership of education for empowered caring requires teaching and learning that develop creative, flexible, interdependent nurses. Key issues are investing in technology, supporting lifelong learning, and creating a community workplace. (Contains 68 references.) (SK)

Technology Helps Increase Poverty Awareness.

ERIC Educational Resources Information Center

Samaras, Anastasia P.

2002-01-01

Discusses the importance of developing curricular initiatives that educate students on the major facts and issues associated with poverty in America. Provides key poverty statistics and highlights useful Internet resources that offer resource lists, success stories, relevant press releases, and curriculum guides. For example, the PovertyUSA Web…

Indigenous Digital Collections

ERIC Educational Resources Information Center

Nakata, N. M.

2007-01-01

The intersection of public institutions managing large amounts of information and knowledge and new information and communication technologies has brought forward exciting and innovative changes to the ways information and knowledge have been traditionally managed. This paper provides a brief snapshot of some of the key issues facing the library…

Critical transport issues for improving the performance of aqueous redox flow batteries

NASA Astrophysics Data System (ADS)

Zhou, X. L.; Zhao, T. S.; An, L.; Zeng, Y. K.; Wei, L.

2017-01-01

As the fraction of electricity generated from intermittent renewable sources (such as solar and wind) grows, developing reliable energy storage technologies to store electrical energy in large scale is of increasing importance. Redox flow batteries are now enjoying a renaissance and regarded as a leading technology in providing a well-balanced solution for current daunting challenges. In this article, state-of-the-art studies of the complex multicomponent transport phenomena in aqueous redox flow batteries, with a special emphasis on all-vanadium redox flow batteries, are reviewed and summarized. Rather than elaborating on the details of previous experimental and numerical investigations, this article highlights: i) the key transport issues in each battery's component that need to be tackled so that the rate capability and cycling stability of flow batteries can be significantly improved, ii) the basic mechanisms that control the active species/ion/electron transport behaviors in each battery's component, and iii) the key experimental and numerical findings regarding the correlations between the multicomponent transport processes and battery performance.

Science and technology issues in spacecraft fire safety

NASA Technical Reports Server (NTRS)

Friedman, Robert; Sacksteder, Kurt R.

1987-01-01

The space station, a permanently-inhabited orbiting laboratory, places new demands on spacecraft fire safety. Long-duration missions may call for more-constrained fire controls, but the accessibility of the space station to a variety of users may call for less-restrictive measures. This paper discusses fire safety issues through a review of the state of the art and a presentation of key findings from a recent NASA Lewis Research Center Workshop. The subjects covered are the fundamental science of low-gravity combustion and the technology advances in fire detection, extinguishment, materials assessment, and atmosphere selection. Key concerns are for the adoption of a fire-safe atmosphere and the substitution for the effective but toxic extinguishant, halon 1301. The fire safety studies and reviews provide several recommendations for further action. One is the expanded research in combustion, sensors, and materials in the low-gravity environment of space. Another is the development of generalized fire-safety standards for spacecraft through cooperative endeavors with aerospace and outside Government and industry sources.

Environmental and economic comparisons of the satellite power system and six alternative energy technologies

DOE Office of Scientific and Technical Information (OSTI.GOV)

Whitfield, R.G.; Habegger, L.J.; Levine, E.P.

1981-04-01

The objective of the comparative assessment is to provide an initial, traceable and consistent comparison of the SPS and selected current, near-term, and advanced energy technologies. Terrestrial alternatives were selected, and their cost, performance, and environmental and societal attributes were specified for use in the comparison with the SPS in the post-2000 era. The framework for comparisons was established. The SPS was compared with alternative systems in terms of key issues such as life-cycle cost and environmental impacts. The results of the assessments were assembled and integrated into a consistent comparative assessment. Environmental and economic effects are evaluated, which weremore » subdivided into the following issue areas: human health and safety, environmental welfare, resources (land, materials, energy, water, labor), macroeconomics, socioeconomics, and institutional. These evaluations were based on technology characterization data and alternative futures scenarios, which were developed as part of CDEP by supporting studies. The technologies and the scenarios are described. An additional major issue area concerned the cost and performance of the SPS and the alternative technologies: results in this area provided part of the basis of the macroeconomic analyses. 159 references.« less

An experimental protocol for the definition of upper limb anatomical frames on children using magneto-inertial sensors.

PubMed

Ricci, L; Formica, D; Tamilia, E; Taffoni, F; Sparaci, L; Capirci, O; Guglielmelli, E

2013-01-01

Motion capture based on magneto-inertial sensors is a technology enabling data collection in unstructured environments, allowing "out of the lab" motion analysis. This technology is a good candidate for motion analysis of children thanks to the reduced weight and size as well as the use of wireless communication that has improved its wearability and reduced its obtrusivity. A key issue in the application of such technology for motion analysis is its calibration, i.e. a process that allows mapping orientation information from each sensor to a physiological reference frame. To date, even if there are several calibration procedures available for adults, no specific calibration procedures have been developed for children. This work addresses this specific issue presenting a calibration procedure for motion capture of thorax and upper limbs on healthy children. Reported results suggest comparable performance with similar studies on adults and emphasize some critical issues, opening the way to further improvements.

A proposed model of factors influencing hydrogen fuel cell vehicle acceptance

NASA Astrophysics Data System (ADS)

Imanina, N. H. Noor; Kwe Lu, Tan; Fadhilah, A. R.

2016-03-01

Issues such as environmental problem and energy insecurity keep worsening as a result of energy use from household to huge industries including automotive industry. Recently, a new type of zero emission vehicle, hydrogen fuel cell vehicle (HFCV) has received attention. Although there are argues on the feasibility of hydrogen as the future fuel, there is another important issue, which is the acceptance of HFCV. The study of technology acceptance in the early stage is a vital key for a successful introduction and penetration of a technology. This paper proposes a model of factors influencing green vehicle acceptance, specifically HFCV. This model is built base on two technology acceptance theories and other empirical studies of vehicle acceptance. It aims to provide a base for finding the key factors influencing new sustainable energy fuelled vehicle, HFCV acceptance which is achieved by explaining intention to accept HFCV. Intention is influenced by attitude, subjective norm and perceived behavioural control from Theory of Planned Behaviour and personal norm from Norm Activation Theory. In the framework, attitude is influenced by perceptions of benefits and risks, and social trust. Perceived behavioural control is influenced by government interventions. Personal norm is influenced by outcome efficacy and problem awareness.

Response to issues on GM agriculture in Africa: Are transgenic crops safe?

PubMed

Adenle, Ademola A

2011-10-08

The controversies surrounding transgenic crops, often called Genetically Modified Organisms (GMOs), call for a need to raise the level of public awareness of Genetic Modification (GM) technology in Africa. This should be accomplished by educating the public about the potential benefits and risks that may be associated with this new technology. In the last 15 years, GM crop producing countries have benefited from adoption of this new technology in the form of improved crop productivity, food security, and quality of life. The increased income to resource-poor farmers is a key benefit at the individual level especially as most countries using this technology are in the developing world, including three African countries (South Africa, Burkina Faso and Egypt). Despite clear benefits to countries and farmers who grow GMOs, many people are concerned about suspected potential risks associated with GMOs. This sparks debate as to whether GM technology should be adopted or not. Given the concerns regarding the safety of GMO products, thorough scientific investigation of safe application of GMOs is required. The objective of this paper is to respond to the issues of GM agriculture in Africa and some of the issues surrounding the adoption of GM crops between developed and developing countries. In this article, I analyse relevant papers relating to the adoption of GM technology particularly in developing countries including the few African countries that have adopted GM crops. The issues discussed span a wide range including: safety; potential benefits and risks; disputes between the United States of America (USA) and the European Union (EU) over adoption of GM crops with a focus on Africa continent. This article is concluded by summarising the issues raised and how GM technology can be adopted for agricultural development in Africa.

Response to issues on GM agriculture in Africa: Are transgenic crops safe?

PubMed Central

2011-01-01

The controversies surrounding transgenic crops, often called Genetically Modified Organisms (GMOs), call for a need to raise the level of public awareness of Genetic Modification (GM) technology in Africa. This should be accomplished by educating the public about the potential benefits and risks that may be associated with this new technology. In the last 15 years, GM crop producing countries have benefited from adoption of this new technology in the form of improved crop productivity, food security, and quality of life. The increased income to resource-poor farmers is a key benefit at the individual level especially as most countries using this technology are in the developing world, including three African countries (South Africa, Burkina Faso and Egypt). Despite clear benefits to countries and farmers who grow GMOs, many people are concerned about suspected potential risks associated with GMOs. This sparks debate as to whether GM technology should be adopted or not. Given the concerns regarding the safety of GMO products, thorough scientific investigation of safe application of GMOs is required. The objective of this paper is to respond to the issues of GM agriculture in Africa and some of the issues surrounding the adoption of GM crops between developed and developing countries. In this article, I analyse relevant papers relating to the adoption of GM technology particularly in developing countries including the few African countries that have adopted GM crops. The issues discussed span a wide range including: safety; potential benefits and risks; disputes between the United States of America (USA) and the European Union (EU) over adoption of GM crops with a focus on Africa continent. This article is concluded by summarising the issues raised and how GM technology can be adopted for agricultural development in Africa. PMID:21981823

Facilities removal working group

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

This working group`s first objective is to identify major economic, technical, and regulatory constraints on operator practices and decisions relevant to offshore facilities removal. Then, the group will try to make recommendations as to regulatory and policy adjustments, additional research, or process improvements and/or technological advances, that may be needed to improve the efficiency and effectiveness of the removal process. The working group will focus primarily on issues dealing with Gulf of Mexico platform abandonments. In order to make the working group sessions as productive as possible, the Facilities Removal Working Group will focus on three topics that address amore » majority of the concerns and/or constraints relevant to facilities removal. The three areas are: (1) Explosive Severing and its Impact on Marine Life, (2) Pile and Conductor Severing, and (3) Deep Water Abandonments This paper will outline the current state of practice in the offshore industry, identifying current regulations and specific issues encountered when addressing each of the three main topics above. The intent of the paper is to highlight potential issues for panel discussion, not to provide a detailed review of all data relevant to the topic. Before each panel discussion, key speakers will review data and information to facilitate development and discussion of the main issues of each topic. Please refer to the attached agenda for the workshop format, key speakers, presentation topics, and panel participants. The goal of the panel discussions is to identify key issues for each of the three topics above. The working group will also make recommendations on how to proceed on these key issues.« less

Application of Ethics for Providing Telemedicine Services and Information Technology.

PubMed

Langarizadeh, Mostafa; Moghbeli, Fatemeh; Aliabadi, Ali

2017-10-01

Advanced technology has increased the use of telemedicine and Information Technology (IT) in treating or rehabilitating diseases. An increased use of technology increases the importance of the ethical issues involved. The need for keeping patients' information confidential and secure, controlling a number of therapists' inefficiency as well as raising the quality of healthcare services necessitates adequate heed to ethical issues in telemedicine provision. The goal of this review is gathering all articles that are published through 5 years until now (2012-2017) for detecting ethical issues for providing telemedicine services and Information technology. The reason of this time is improvement of telemedicine and technology through these years. This article is important for clinical practice and also to world, because of knowing ethical issues in telemedicine and technology are always important factors for physician and health providers. the required data in this research were derived from published electronic sources and credible academic articles published in such databases as PubMed, Scopus and Science Direct. The following key words were searched for in separation and combination: tele-health, telemedicine, ethical issues in telemedicine. A total of 503 articles were found. After excluding the duplicates (n= 93), the titles and abstracts of 410 articles were skimmed according to the inclusion criteria. Finally, 64 articles remained. They were reviewed in full text and 36 articles were excluded. At the end, 28 articles were chosen which met our eligibility criteria and were included in this study. Ethics has been of a great significance in IT and telemedicine especially the Internet since there are more chances provided for accessing information. It is, however, accompanied by a threat to patients' personal information. Therefore, suggestions are made to investigate ethics in technology, to offer standards and guidelines to therapists. Due to the advancement in technology, access to information has become simpler than the past. This has prompted hackers to seize the opportunity. This research shows that the ethical issues in telemedicine can be investigated from several aspects like technology, doctor-patient relationship, data confidentiality and security, informed consent, patient's and family's satisfaction with telemedicine services. Following ethical issues in telemedicine is a primary aspect of high quality services. In other words, if therapists abide by ethical rules, they can provide better services for patients. Attention to ethical issues in telemedicine guarantees a safer use of the services.

Transforming care: medical practice design and information technology.

PubMed

Kilo, Charles M

2005-01-01

The transformation of the medical practice is possible today because of the advancement of system design knowledge coupled with innovations in information technology (IT). Examples of such transformed care are present today, and they are creating a roadmap for others. Those efforts are also elucidating critical issues in the use of IT to advance health care quality. Connectivity, electronic integration, and knowledge management are the key functionalities emerging as levers to promote this transformation.

PROCEEDINGS: EIGHTH SYMPOSIUM ON THE TRANSFER AND UTILIZATION OF PARTICULATE CONTROL TECHNOLOGY - VOLUME 1. ELECTROSTATIC PRECIPITATORS

EPA Science Inventory

The two-volume proceedings describe the latest research and development efforts to improve particulate control devices, while treating traditional concerns of operational cost and compliance. Overall, particulate control remains a key issue in the cost and applicability of furnac...

Role of CCTs in the evolving domestic electricity market

DOE Office of Scientific and Technical Information (OSTI.GOV)

Grahame, T.J.

1997-12-31

The paper summarizes the key points and issues in the role of clean coal technologies in the domestic marketplace. Then suggested solutions to bringing precommercial CCTs to the market are presented. Finally, the outlook for possible actions by government and the private sector are briefly discussed.

Learners on the Move: Mobile Modalities in Development Studies

ERIC Educational Resources Information Center

Beckmann, Elizabeth A.

2010-01-01

Many careers involve mobile lifestyles, yet require specialised postgraduate qualifications for career progression. Mobile technologies offer new opportunities by providing more choice in when, where, and how students learn. Experiences in an Australian postgraduate development studies program illustrate the choices. Three key issues are explored:…

Initial MPTS study results: Design considerations and issues

NASA Astrophysics Data System (ADS)

Maynard, O. E.

1980-12-01

One of the key issues identified during investigations of microwave power transmission systems from 1965 to 1976 was the need to assure that the billions of diodes on ground-based rectennas are sufficiently reliable to support long life times of approximately 30 years. Major systems studies conducted focused on waveguides; radio frequency interference and biological considerations; the relationship between performance, weight, and cost; risk assessment; crossed field directional amplifier noise; a 48 kW klystron; effects of the environment on propagation and phase control; rectenna technology; a rationale for the ground power density region; alternate technologies for orbital assembly; ionospheric effects and phase control; and reception conversion (rf to dc collector/converter).

Preface to the special issue on "Integrated Microwave Photonic Signal Processing"

NASA Astrophysics Data System (ADS)

Azaña, José; Yao, Jianping

2016-08-01

As Guest Editors, we are pleased to introduce this special issue on ;Integrated Microwave Photonic Signal Processing; published by the Elsevier journal Optics Communications. Microwave photonics is a field of growing importance from both scientific and practical application perspectives. The field of microwave photonics is devoted to the study, development and application of optics-based techniques and technologies aimed to the generation, processing, control, characterization and/or distribution of microwave signals, including signals well into the millimeter-wave frequency range. The use of photonic technologies for these microwave applications translates into a number of key advantages, such as the possibility of dealing with high-frequency, wide bandwidth signals with minimal losses and reduced electromagnetic interferences, and the potential for enhanced reconfigurability. The central purpose of this special issue is to provide an overview of the state of the art of generation, processing and characterization technologies for high-frequency microwave signals. It is now widely accepted that the practical success of microwave photonics at a large scale will essentially depend on the realization of high-performance microwave-photonic signal-processing engines in compact and integrated formats, preferably on a chip. Thus, the focus of the issue is on techniques implemented using integrated photonic technologies, with the goal of providing an update of the most recent advances toward realization of this vision.

Network Computing Infrastructure to Share Tools and Data in Global Nuclear Energy Partnership

NASA Astrophysics Data System (ADS)

Kim, Guehee; Suzuki, Yoshio; Teshima, Naoya

CCSE/JAEA (Center for Computational Science and e-Systems/Japan Atomic Energy Agency) integrated a prototype system of a network computing infrastructure for sharing tools and data to support the U.S. and Japan collaboration in GNEP (Global Nuclear Energy Partnership). We focused on three technical issues to apply our information process infrastructure, which are accessibility, security, and usability. In designing the prototype system, we integrated and improved both network and Web technologies. For the accessibility issue, we adopted SSL-VPN (Security Socket Layer-Virtual Private Network) technology for the access beyond firewalls. For the security issue, we developed an authentication gateway based on the PKI (Public Key Infrastructure) authentication mechanism to strengthen the security. Also, we set fine access control policy to shared tools and data and used shared key based encryption method to protect tools and data against leakage to third parties. For the usability issue, we chose Web browsers as user interface and developed Web application to provide functions to support sharing tools and data. By using WebDAV (Web-based Distributed Authoring and Versioning) function, users can manipulate shared tools and data through the Windows-like folder environment. We implemented the prototype system in Grid infrastructure for atomic energy research: AEGIS (Atomic Energy Grid Infrastructure) developed by CCSE/JAEA. The prototype system was applied for the trial use in the first period of GNEP.

Modern medicine and the "uncertain body": from corporeality to hyperreality?

PubMed

Williams, S J

1997-10-01

This paper (re)considers the role of medical technology at three interrelated levels: first, the extent to which medical technology renders our bodies increasingly "uncertain" at the turn of the century; second, the analytical purchase which the notion of the (medical) cyborg provides regarding contemporary forms of human embodiment; and finally, at a broader level, the issues this raises in relation to a (late) modernist or postmodernist reading of contemporary medical practice. Key themes here include the plastic body, the bionic body, communal/interchangeable bodies, (genetically) engineered/ chosen bodies, and virtual bodies. The paper concludes with a critical appraisal of these themes and issues, arguing for a late modernist position on medical technology as both a positive and negative rationalising force, and a "life political agenda" in which the "all-too-human" quality of human nature is seen as inviolable.

Telerehabilitation Technologies: Accessibility and Usability

PubMed Central

Pramuka, Michael; van Roosmalen, Linda

2009-01-01

In the fields of telehealth and telemedicine, phone and/or video technologies are key to the successful provision of services such as remote monitoring and visits. How do these technologies affect service accessibility, effectiveness, quality, and usefulness when applied to rehabilitation services in the field of telerehabilitation? To answer this question, we provide a overview of the complex network of available technologies and discuss how they link to rehabilitation applications, services, and practices as well as to the telerehabilitation end-user. This white paper will first present the numerous professional considerations that shape the use of technology in telerehabilitation service and set it somewhat apart from telemedicine. It will then provide an overview of concepts essential to usability analysis; present a summary of various telerehabilitation technologies and their strengths and limitations, and consider how the technologies interface with end users’ clinical needs for service accessibility, effectiveness, quality, and usefulness. The paper will highlight a conceptual framework (including task analyses and usability issues) that underlies a functional match between telerehabilitation technologies, clinical applications, and end-user capabilities for telerehabilitation purposes. Finally, we will discuss pragmatic issues related to user integration of telerehabilitation technology versus traditional face-to-face approaches. PMID:25945165

Actualities and Development of Heavy-Duty CNC Machine Tool Thermal Error Monitoring Technology

NASA Astrophysics Data System (ADS)

Zhou, Zu-De; Gui, Lin; Tan, Yue-Gang; Liu, Ming-Yao; Liu, Yi; Li, Rui-Ya

2017-09-01

Thermal error monitoring technology is the key technological support to solve the thermal error problem of heavy-duty CNC (computer numerical control) machine tools. Currently, there are many review literatures introducing the thermal error research of CNC machine tools, but those mainly focus on the thermal issues in small and medium-sized CNC machine tools and seldom introduce thermal error monitoring technologies. This paper gives an overview of the research on the thermal error of CNC machine tools and emphasizes the study of thermal error of the heavy-duty CNC machine tool in three areas. These areas are the causes of thermal error of heavy-duty CNC machine tool and the issues with the temperature monitoring technology and thermal deformation monitoring technology. A new optical measurement technology called the "fiber Bragg grating (FBG) distributed sensing technology" for heavy-duty CNC machine tools is introduced in detail. This technology forms an intelligent sensing and monitoring system for heavy-duty CNC machine tools. This paper fills in the blank of this kind of review articles to guide the development of this industry field and opens up new areas of research on the heavy-duty CNC machine tool thermal error.

The Course Development Plan: Macro-Level Decisions and Micro-Level Processes

ERIC Educational Resources Information Center

Franker, Karen; James, Dennis

2016-01-01

A key step in distance learning project management is the creation of a course development plan. The plan should account for decisions related to materials, curriculum, delivery methods, staffing, technology applications, resources, reporting lines, and project management--issues that may require administrator involvement and support, particularly…

Student Cooperative Training Units. Business Partnerships Final Performance Report.

ERIC Educational Resources Information Center

Wheeles, Rebecca

The North Clackamas School District (Oregon) conducted the Student Cooperative Training Units (CTU) program. The CTU program addressed two key issues that disrupted the development and maintenance of local high technology businesses: (1) The aerospace parts casting, health care, and graphic reproduction industries have experienced a shortage of…

Presidential Opinions on Today's Key Issues.

ERIC Educational Resources Information Center

Budig, Gene A.

1986-01-01

Interviews with chief executives of large state universities by the chancellor of the University of Kansas are described. The need to work more closely with state officials, concern about faculty morale, new campus-statehouse initiatives to advance high technology and fuel state economic growth, and college athletics are discussed. (MLW)

Climate change : preliminary observations on geoengineering science, federal efforts, and governance issues : testimony before the Committee on Science and Technology, House of Representatives.

DOT National Transportation Integrated Search

2010-03-18

Key scientific assessments have underscored the urgency of reducing emissions of carbon dioxide to help mitigate potentially negative effects of climate change; however, many countries with significant greenhouse gas emissions, including the United S...

Palomar College: A Technological Transformation.

ERIC Educational Resources Information Center

Halttunen, Lynda Gavigan

2002-01-01

Offers advice for colleges intending to undergo software conversions, asserting that sufficient resources are key to a smooth process. Describes the conversion process at Palomar College (California) in 1997, when Palomar purchased PeopleSoft enterprise-wide software in response to Y2K compliance issues. Stresses the ongoing need for training and…

Identity and Access Management: Technological Implementation of Policy

ERIC Educational Resources Information Center

von Munkwitz-Smith, Jeff; West, Ann

2004-01-01

Navigating the multiple processes for accessing ever-multiplying campus information systems can be a daunting task for students, faculty, and staff. This article provides a brief overview of Identity and Access Management Services. The authors review key characteristics and components of this new information architecture and address the issue of…

Technology transfer for adaptation

NASA Astrophysics Data System (ADS)

Biagini, Bonizella; Kuhl, Laura; Gallagher, Kelly Sims; Ortiz, Claudia

2014-09-01

Technology alone will not be able to solve adaptation challenges, but it is likely to play an important role. As a result of the role of technology in adaptation and the importance of international collaboration for climate change, technology transfer for adaptation is a critical but understudied issue. Through an analysis of Global Environment Facility-managed adaptation projects, we find there is significantly more technology transfer occurring in adaptation projects than might be expected given the pessimistic rhetoric surrounding technology transfer for adaptation. Most projects focused on demonstration and early deployment/niche formation for existing technologies rather than earlier stages of innovation, which is understandable considering the pilot nature of the projects. Key challenges for the transfer process, including technology selection and appropriateness under climate change, markets and access to technology, and diffusion strategies are discussed in more detail.

Radiation response issues for infrared detectors

NASA Technical Reports Server (NTRS)

Kalma, Arne H.

1990-01-01

Researchers describe the most important radiation response issues for infrared detectors. In general, the two key degradation mechanisms in infrared detectors are the noise produced by exposure to a flux of ionizing particles (e.g.; trapped electronics and protons, debris gammas and electrons, radioactive decay of neutron-activated materials) and permanent damage produced by exposure to total dose. Total-dose-induced damage is most often the result of charge trapping in insulators or at interfaces. Exposure to short pulses of ionization (e.g.; prompt x rays or gammas, delayed gammas) will cause detector upset. However, this upset is not important to a sensor unless the recovery time is too long. A few detector technologies are vulnerable to neutron-induced displacement damage, but fortunately most are not. Researchers compare the responses of the new technologies with those of the mainstream technologies of PV HgCdTe and IBC Si:As. One important reason for this comparison is to note where some of the newer technologies have the potential to provide significantly improved radiation hardness compared with that of the mainstream technologies, and thus to provide greater motivation for the pursuit of these technologies.

Integration of Technology-based Behavioral Health Interventions in Substance Abuse and Addiction Services

PubMed Central

Ramsey, Alex

2015-01-01

The past decade has witnessed revolutionary changes to the delivery of health services, ushered in to a great extent by the introduction of electronic health record systems. More recently, a new class of technological advancements—technology-based behavioral health interventions, which involve the delivery of evidence-informed practices via computers, web-based applications, mobile phones, wearable sensors, or other technological platforms—has emerged and is primed to once again radically shift current models for behavioral healthcare. Despite the promise and potential of these new therapeutic approaches, a greater understanding of the impact of technology-based interventions on cornerstone issues of mental health and addiction services—namely access, quality, and cost—is needed. The current review highlights 1) relevant conceptual frameworks that guide this area of research, 2) key studies that inform the relevance of technology-based interventions for behavioral healthcare access, quality, and cost, 3) pressing methodological issues that require attention, 4) unresolved questions that warrant further investigation, and 5) practical implications that underscore important new directions for this emerging area of research. PMID:26161047

Integration of Technology-based Behavioral Health Interventions in Substance Abuse and Addiction Services.

PubMed

Ramsey, Alex

2015-08-01

The past decade has witnessed revolutionary changes to the delivery of health services, ushered in to a great extent by the introduction of electronic health record systems. More recently, a new class of technological advancements-technology-based behavioral health interventions, which involve the delivery of evidence-informed practices via computers, web-based applications, mobile phones, wearable sensors, or other technological platforms-has emerged and is primed to once again radically shift current models for behavioral healthcare. Despite the promise and potential of these new therapeutic approaches, a greater understanding of the impact of technology-based interventions on cornerstone issues of mental health and addiction services-namely access, quality, and cost -is needed. The current review highlights 1) relevant conceptual frameworks that guide this area of research, 2) key studies that inform the relevance of technology-based interventions for behavioral healthcare access, quality, and cost, 3) pressing methodological issues that require attention, 4) unresolved questions that warrant further investigation, and 5) practical implications that underscore important new directions for this emerging area of research.

The Prospect of Increased Japanese Military Burdensharing

DTIC Science & Technology

1988-03-30

defense issues, the understanding of Japan’s future will be a key asset in formulating an effective negotiation strategy. 5 I,~ SOME COMMON MISPERCEPTIONS...entire Warsaw Pact nations and the Soviet Union together. 3 A Rand Corporation study also concluded that Asia’s economy will play a larger part in a...military roles in the area, they warfi that Japan will steal our technologies for other uses. Bashing a key friend and ally in this manner is, to say

Stakeholders' views on ethical issues in the practice of in-vitro fertilisation and embryo transfer in Nigeria.

PubMed

Ajayi, R A; Dibosa-Osadolor, O J

2011-09-01

The provision of IVF for the specialized treatment of infertility has grown very rapidly in Nigeria in recent times, especially within the private sector. The objective of this study was to document the views of key stakeholders regarding salient ethical issues relating to the practice of in-vitro fertilisation (IVF) in Nigeria. A think-tank session was convened with participants drawn from different backgrounds and disciplines to deliberate on ethical issues in IVF. Ten key issues were discussed at this inaugural session. It was unanimously agreed that there are no right or wrong answers when considering the ethics and morality of IVF as these are principally dependent on choice and circumstances. However within the legal and socio-cultural dictates of the Nigerian society, right and wrong may be clearly determined on some issues. With the expansion of the IVF industry and technology in Nigeria, the need to address related ethical issues have become paramount. The forum recommended that it is important that regulatory guidelines are put in place to regulate the practice of IVF in Nigeria and to protect patients' rights and safety.

Biomedical technology prosperity game{trademark}

DOE Office of Scientific and Technical Information (OSTI.GOV)

Berman, M.; Boyack, K.W.; Wesenberg, D.L.

1996-07-01

Prosperity Games{trademark} are an outgrowth and adaptation of move/countermove and seminar War Games. Prosperity Games{trademark} are simulations that explore complex issues in a variety of areas including economics, politics, sociology, environment, education and research. These issues can be examined from a variety of perspectives ranging from a global, macroeconomic and geopolitical viewpoint down to the details of customer/supplier/market interactions in specific industries. All Prosperity Games{trademark} are unique in that both the game format and the player contributions vary from game to game. This report documents the Biomedical Technology Prosperity Game{trademark} conducted under the sponsorship of Sandia National Laboratories, the Defensemore » Advanced Research Projects Agency, and the Koop Foundation, Inc. Players were drawn from all stakeholders involved in biomedical technologies including patients, hospitals, doctors, insurance companies, legislators, suppliers/manufacturers, regulators, funding organizations, universities/laboratories, and the legal profession. The primary objectives of this game were to: (1) Identify advanced/critical technology issues that affect the cost and quality of health care. (2) Explore the development, patenting, manufacturing and licensing of needed technologies that would decrease costs while maintaining or improving quality. (3) Identify policy and regulatory changes that would reduce costs and improve quality and timeliness of health care delivery. (4) Identify and apply existing resources and facilities to develop and implement improved technologies and policies. (5) Begin to develop Biomedical Technology Roadmaps for industry and government cooperation. The deliberations and recommendations of these players provided valuable insights as to the views of this diverse group of decision makers concerning biomedical issues. Significant progress was made in the roadmapping of key areas in the biomedical technology field.« less

A quasi-Delphi study on technological barriers to the uptake of hydrogen as a fuel for transport applications-Production, storage and fuel cell drivetrain considerations

NASA Astrophysics Data System (ADS)

Hart, David; Anghel, Alexandra T.; Huijsmans, Joep; Vuille, François

The introduction of hydrogen in transport, particularly using fuel cell vehicles, faces a number of technical and non-technical hurdles. However, their relative importance is unclear, as are the levels of concern accorded them within the expert community conducting research and development within this area. To understand what issues are considered by experts working in the field to have significant potential to slow down or prevent the introduction of hydrogen technology in transport, a study was undertaken, primarily during 2007. Three key technology areas within hydrogen transport were selected - hydrogen storage, fuel cell drivetrains, and small-scale hydrogen production - and interviews with selected experts conducted. Forty-nine experts from 34 organisations within the fuel cell, automotive, industrial gas and other related industries participated, in addition to some key academic and government figures. The survey was conducted in China, Japan, North America and Europe, and analysed using conventional mathematical techniques to provide weighted and averaged rankings of issues viewed as important by the experts. It became clear both from the interviews and the subsequent analysis that while a primary concern in China was fundamental technical performance, in the other regions cost and policy were rated more highly. Although a few individual experts identified possible technical showstoppers, the overall message was that pre-commercial hydrogen fuel cell vehicles could realistically be on the road in tens of thousands within 5 years, and that full commercialisation could take place within 10-15 years, without the need for radical technical breakthroughs. Perhaps surprisingly, the performance of hydrogen storage technologies was not viewed as a showstopper, though cost was seen as a significant challenge. Overall, however, coherent policy development was more frequently identified as a major issue to address.

Patient and nurse safety: how information technology makes a difference.

PubMed

Simpson, Roy L

2005-01-01

The Institute of Medicine's landmark report asserted medical error is seldom the fault of individuals, but the result of faulty healthcare policy/procedure systems. Numerous studies have shown that information technology can shore up weak systems. For nursing, information technology plays a key role in protecting patients by eliminating nursing mistakes and protecting nurses by reducing their negative exposure. However, managing information technology is a function of managing the people who use it. This article examines critical issues that impact patient and nurse safety, both physical and professional. It discusses the importance of eliminating the culture of blame, the requirements of process change, how to implement technology in harmony with the organization and the significance of vision.

Introduction. Information, knowledge and technology.

PubMed

MacFarlane, Alistair G J

2003-08-15

Technology is the sum of the ways in which social groups manipulate order in the world to achieve their ends. It enables our active engagement with the world. Technology is central to our present well-being and vital for our future survival. As such it needs a coherent world view, a conceptual framework which will enable the fundamental problems that it poses for society to be approached in an illuminating way. Furthermore, such an approach, while remaining convincing, must not be overwhelmed by an ever-increasing welter of specialization and diversity of application. It is the purpose of the set of papers presented here to examine some key aspects of such a conceptual framework; not in the sense of offering a fully worked out philosophy of technology--that would be a huge and complex undertaking--but rather by considering some key topics. Subsidiary aims are to survey important relevant areas, to identify key sources that can provide access points for further study, and to consider some possible future developments. Major, coherent domains of activity are characterized by a few, fundamental, extensively used and essentially unifying concepts. Technology is such a domain, and its fundamental concepts are information, knowledge and agency. The following sections give a synoptic overview of the material presented in this theme issue, and set it within a wider context.

Avoiding dangerous climate change

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hans Joachim Schellnhuber; Wolfgang Cramer; Nebojsa Nakicenovic

2006-02-15

In 2005 the UK Government hosted the Avoiding Dangerous Climate Change conference to take an in-depth look at the scientific issues associated with climate change. This volume presents the most recent findings from the leading international scientists that attended the conference. The topics addressed include critical thresholds and key vulnerabilities of the climate system, impacts on human and natural systems, socioeconomic costs and benefits of emissions pathways, and technological options for meeting different stabilisation levels of greenhouse gases in the atmosphere. Contents are: Foreword from Prime Minister Tony Blair; Introduction from Rajendra Pachauri, Chairman of the IPCC; followed by 41more » papers arranged in seven sections entitled: Key Vulnerabilities of the Climate System and Critical Thresholds; General Perspectives on Dangerous Impacts; Key Vulnerabilities for Ecosystems and Biodiversity; Socio-Economic Effects; Regional Perspectives; Emission Pathways; and Technological Options. Four papers have been abstracted separately for the Coal Abstracts database.« less

Technology support to a telehealth in the home service: Qualitative observations.

PubMed

Taylor, Alan; Wade, Victoria; Morris, Greg; Pech, Joanne; Rechter, Stuart; Kidd, Michael; Carati, Colin

2016-07-01

The Flinders University Telehealth in the Home (FTH) trial was an action research initiative that introduced and evaluated the impact of telehealth services on palliative care patients living in the community, home-based rehabilitation services for the elderly, and services to the elderly in residential aged care. The aim of this study was to understand the issues encountered during the provision of technology services that supported this trial. A mixed methods approach was undertaken to analyse the roles of information and communication technology (ICT) and clinical staff in design, technology management and training. The data sources were staff observations and documents including job logs, meetings, emails and technology descriptions. Use of consumer technology for telehealth required customisation of applications and services. Clinicians played a key role in definition of applications and the embedding of workflow into applications. Usability of applications was key to their subsequent use. Management of design creep and technology services, coupled with support and training for clinicians were important to maintenance of a telehealth service. In the setting described, an iterative approach to the development of telehealth services to the home using consumer technologies was needed. The efficient management of consumer devices in multiple settings will become critical as telehealth services grow in scale. Effective collaboration between clinical and technical stakeholders and further workforce education in telehealth can be key enablers for the transition of face-to-face care to a telehealth mode of delivery. © The Author(s) 2015.

Commercialization of Plasma-Assisted Technologies: The Indian Experience

NASA Astrophysics Data System (ADS)

John, P. I.

The paper describes an initiative by the Institute for Plasma Research (IPR), India in establishing links with the Indian industry for developing and commercialising advanced plasma-based industrial technologies. This has culminated in the creation of a self-financing technology development, incubation, demonstration and delivery facility. A business plan for converting the knowledge base to commercially viable technologies conceived technology as a product and the industry as the market and addressed issues like resistance to new technologies, the key role of entrepreneur, thrust areas and the necessity of technology incubation and delivery. Success of this strategy is discussed in a few case studies. We conclude by identifying the cost, environmental, strategic and techno-economic aspects, which would be the prime drivers for plasma-assisted manufacturing technology in India.

Low-rank coal study: national needs for resource development. Volume 3. Technology evaluation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1980-11-01

Technologies applicable to the development and use of low-rank coals are analyzed in order to identify specific needs for research, development, and demonstration (RD and D). Major sections of the report address the following technologies: extraction; transportation; preparation, handling and storage; conventional combustion and environmental control technology; gasification; liquefaction; and pyrolysis. Each of these sections contains an introduction and summary of the key issues with regard to subbituminous coal and lignite; description of all relevant technology, both existing and under development; a description of related environmental control technology; an evaluation of the effects of low-rank coal properties on the technology;more » and summaries of current commercial status of the technology and/or current RD and D projects relevant to low-rank coals.« less

Proceedings from the Workshop on Phytoremediation of Inorganic Contaminants

DOE Office of Scientific and Technical Information (OSTI.GOV)

Brown, Jay Thatcher; Matthern, Gretchen Elise; Glenn, Anne Williams

The Metals and Radionuclides Product Line of the U.S. Department of Energy (DOE) Subsurface Contaminants Focus Area (SCFA) is responsible for the development of technologies and systems that reduce the risk and cost of remediation of radionuclide and hazardous metal contamination in soils and groundwater. The rapid and efficient remediation of these sites and the areas surrounding them represents a technological challenge. Phytoremediation, the use of living plants to cleanup contaminated soils, sediments, surface water and groundwater, is an emerging technology that may be applicable to the problem. The use of phytoremediation to cleanup organic contamination is widely accepted andmore » is being implemented at numerous sites. This workshop was held to initiate a discussion in the scientific community about whether phytoremediation is applicable to inorganic contaminants, such as metals and radionuclides, across the DOE complex. The Workshop on Phytoremediation of Inorganic Contaminants was held at Argonne National Laboratory from November 30 through December 2, 1999. The purpose of the workshop was to provide SCFA and the DOE Environmental Restoration Program with an understanding of the status of phytoremediation as a potential remediation technology for DOE sites. The workshop was expected to identify data gaps, technologies ready for demonstration and deployment, and to provide a set of recommendations for the further development of these technologies. More specifically, the objectives of the workshop were to: · Determine the status of the existing baseline, including technological maturation, · Identify areas for future potential research, · Identify the key issues and recommendations for issue resolution, · Recommend a strategy for maturing key aspects of phytoremediation, · Improve communication and collaboration among organizations currently involved in phytoremediation research, and · Identify technical barriers to making phytoremediation commercially successful in more areas.« less

Novel Material Integration for Reliable and Energy-Efficient NEM Relay Technology

NASA Astrophysics Data System (ADS)

Chen, I.-Ru

Energy-efficient switching devices have become ever more important with the emergence of ubiquitous computing. NEM relays are promising to complement CMOS transistors as circuit building blocks for future ultra-low-power information processing, and as such have recently attracted significant attention from the semiconductor industry and researchers. Relay technology potentially can overcome the energy efficiency limit for conventional CMOS technology due to several key characteristics, including zero OFF-state leakage, abrupt switching behavior, and potentially very low active energy consumption. However, two key issues must be addressed for relay technology to reach its full potential: surface oxide formation at the contacting surfaces leading to increased ON-state resistance after switching, and high switching voltages due to strain gradient present within the relay structure. This dissertation advances NEM relay technology by investigating solutions to both of these pressing issues. Ruthenium, whose native oxide is conductive, is proposed as the contacting material to improve relay ON-state resistance stability. Ruthenium-contact relays are fabricated after overcoming several process integration challenges, and show superior ON-state resistance stability in electrical measurements and extended device lifetime. The relay structural film is optimized via stress matching among all layers within the structure, to provide lower strain gradient (below 10E-3/microm -1) and hence lower switching voltage. These advancements in relay technology, along with the integration of a metallic interconnect layer, enable complex relay-based circuit demonstration. In addition to the experimental efforts, this dissertation theoretically analyzes the energy efficiency limit of a NEM switch, which is generally believed to be limited by the surface adhesion energy. New compact (<1 microm2 footprint), low-voltage (<0.1 V) switch designs are proposed to overcome this limit. The results pave a pathway to scaled energy-efficient electronic device technology.

CONTACT: An Air Force technical report on military satellite control technology

NASA Astrophysics Data System (ADS)

Weakley, Christopher K.

1993-07-01

This technical report focuses on Military Satellite Control Technologies and their application to the Air Force Satellite Control Network (AFSCN). This report is a compilation of articles that provide an overview of the AFSCN and the Advanced Technology Program, and discusses relevant technical issues and developments applicable to the AFSCN. Among the topics covered are articles on Future Technology Projections; Future AFSCN Topologies; Modeling of the AFSCN; Wide Area Communications Technology Evolution; Automating AFSCN Resource Scheduling; Health & Status Monitoring at Remote Tracking Stations; Software Metrics and Tools for Measuring AFSCN Software Performance; Human-Computer Interface Working Group; Trusted Systems Workshop; and the University Technical Interaction Program. In addition, Key Technology Area points of contact are listed in the report.

Key Tasks of Science in Improving Effectiveness of Hard Coal Production in Poland

NASA Astrophysics Data System (ADS)

Dubiński, Józef; Prusek, Stanisław; Turek, Marian

2017-09-01

The article presents an array of specific issues regarding the employed technology and operational efficiency of mining activities, which could and should become the subject of conducted scientific research. Given the circumstances of strong market competition and increasing requirements concerning environmental conditions, both in terms of conducted mining activities and produced coal quality parameters, it is imperative to develop and implement innovative solutions regarding the employed production technology, the safety of work conducted under the conditions of increasing natural hazards, as well as the mining enterprise management systems that enable its effective functioning. The article content pertains to the last group of issues in the most detailed way, particularly in terms of the possibility for rational conducted operation cost reduction.

OverView of Space Applications for Environment (SAFE) initiative

NASA Astrophysics Data System (ADS)

Hamamoto, Ko; Fukuda, Toru; Tajima, Yoshimitsu; Takeuchi, Wataru; Sobue, Shinichi; Nukui, Tomoyuki

2014-06-01

Climate change and human activities have a direc or indirect influence on the acceleration of environmental problems and natural hazards such as forest fires, draughts and floods in the Asia-Pacific countries. Satellite technology has become one of the key information sources in assessment, monitoring and mitigation of these disasters and related phenomenon. However, there are still gaps between science and application of satellite technology in real-world usage. Asia-Pacific Regional Space Agency Forum (APRSAF) recommended to initiate the Space Applications for Environment (SAFE) proposal providing opportunity to potential user agencies in the Asia Pacific region to develop prototype applications of satellite technology for number of key issues including forest resources management, coastal monitoring and management, agriculture and food security, water resource management and development user-friendly tools for application of satellite technology. This paper describes the overview of SAFE initiative and outcomes of two selected prototypes; agricultural drought monitoring in Indonesia and coastal management in Sri Lanka, as well as the current status of on-going prototypes.

Development of DEMO-FNS tokamak for fusion and hybrid technologies

NASA Astrophysics Data System (ADS)

Kuteev, B. V.; Azizov, E. A.; Alexeev, P. N.; Ignatiev, V. V.; Subbotin, S. A.; Tsibulskiy, V. F.

2015-07-01

The history of fusion-fission hybrid systems based on a tokamak device as an extremely efficient DT-fusion neutron source has passed through several periods of ample research activity in the world since the very beginning of fusion research in the 1950s. Recently, a new roadmap of the hybrid program has been proposed with the goal to build a pilot hybrid plant (PHP) in Russia by 2030. Development of the DEMO-FNS tokamak for fusion and hybrid technologies, which is planned to be built by 2023, is the key milestone on the path to the PHP. This facility is in the phase of conceptual design aimed at providing feasibility studies for a full set of steady state tokamak technologies at a fusion energy gain factor Q ˜ 1, fusion power of ˜40 MW and opportunities for testing a wide range of hybrid technologies with the emphasis on continuous nuclide processing in molten salts. This paper describes the project motivations, its current status and the key issues of the design.

1992 NASA Life Support Systems Analysis workshop

NASA Technical Reports Server (NTRS)

Evanich, Peggy L.; Crabb, Thomas M.; Gartrell, Charles F.

1992-01-01

The 1992 Life Support Systems Analysis Workshop was sponsored by NASA's Office of Aeronautics and Space Technology (OAST) to integrate the inputs from, disseminate information to, and foster communication among NASA, industry, and academic specialists. The workshop continued discussion and definition of key issues identified in the 1991 workshop, including: (1) modeling and experimental validation; (2) definition of systems analysis evaluation criteria; (3) integration of modeling at multiple levels; and (4) assessment of process control modeling approaches. Through both the 1991 and 1992 workshops, NASA has continued to seek input from industry and university chemical process modeling and analysis experts, and to introduce and apply new systems analysis approaches to life support systems. The workshop included technical presentations, discussions, and interactive planning, with sufficient time allocated for discussion of both technology status and technology development recommendations. Key personnel currently involved with life support technology developments from NASA, industry, and academia provided input to the status and priorities of current and future systems analysis methods and requirements.

Workplace exposure to engineered nanomaterials: the Italian path for the definition of occupational health and safety policies.

PubMed

Mirabile, Marco; Boccuni, Fabio; Gagliardi, Diana; Rondinone, Bruna Maria; Iavicoli, Sergio

2014-07-01

This study explores the way the publication of a National White Book on health and safety risks that affect workers in jobs involving Nanotechnologies and Nanomaterials influenced the key Italian stakeholders attitude toward this issue and identifies the standpoints and priorities shared among researchers and stakeholders to develop a policy framework to address this issue. The study not only highlights some important assumptions (i.e. the acknowledgment by the key stakeholders of the need for actions and the identification of objectives which can gain a wide consensus) for the establishment of a policy community that sustains the development of a policymaking process on the issue but, through the interaction between stakeholders and OSH researchers, it also identifies some in nuce proposals that represent the starting point for policy interventions aimed at meeting the needs of both stakeholders and scientific community. Results obtained in terms of clarification of interests at stake, identification of potential areas of consensus and level of key national actors' engagement achieved, show the potentialities of adopting a knowledge based and inclusive approach to policy-making to address the issue of prevention and management of health and safety risks related to technological innovation within a framework of scientific uncertainty. Copyright © 2014 Elsevier Ireland Ltd. All rights reserved.

Transparency in practice: Evidence from 'verification analyses' issued by the Polish Agency for Health Technology Assessment in 2012-2015.

PubMed

Ozierański, Piotr; Löblová, Olga; Nicholls, Natalia; Csanádi, Marcell; Kaló, Zoltán; McKee, Martin; King, Lawrence

2018-01-08

Transparency is recognised to be a key underpinning of the work of health technology assessment (HTA) agencies, yet it has only recently become a subject of systematic inquiry. We contribute to this research field by considering the Polish Agency for Health Technology Assessment (AHTAPol). We situate the AHTAPol in a broader context by comparing it with the National Institute for Health and Care Excellence (NICE) in England. To this end, we analyse all 332 assessment reports, called verification analyses, that the AHTAPol issued from 2012 to 2015, and a stratified sample of 22 Evidence Review Group reports published by NICE in the same period. Overall, by increasingly presenting its key conclusions in assessment reports, the AHTAPol has reached the transparency standards set out by NICE in transparency of HTA outputs. The AHTAPol is more transparent than NICE in certain aspects of the HTA process, such as providing rationales for redacting assessment reports and providing summaries of expert opinions. Nevertheless, it is less transparent in other areas of the HTA process, such as including information on expert conflicts of interest. Our findings have important implications for understanding HTA in Poland and more broadly. We use them to formulate recommendations for policymakers.

The Temporal Impact and Implications of E-Learning

ERIC Educational Resources Information Center

Graham, Deryn

2014-01-01

The concept of time is a key issue incorporated in most educational theories, and the notion of time has been considered in different ways in diverse approaches, such as behaviourism, genetic epistemology, cultural psychology and didactic. In research leading to the development of a nine-stage Transnational Framework for E-Learning Technologies,…

Modeling Public School Partnerships: Merging Corporate and Community Issues.

ERIC Educational Resources Information Center

Clark, Cynthia E.; Brill, Dale A.

This paper describes a model that merges corporate community relations strategy and public relations pedagogy to accelerate the rate at which Internet-based technologies are integrated into the public schools system. The model provides Internet-based training for a select group of Key Contacts drawn from two urban middle schools. Training is…

The Best of CAUSE/EFFECT: 1978-1991.

ERIC Educational Resources Information Center

Rudy, Julia A., Ed.

This issue of the higher education information technology magazine, CAUSE/EFFECT, presents in six articles six summaries of the best from this journal since 1978. The articles each summarize the writing done over the years in one of six key areas. The articles are as follows: (1) "Rise of Infrastructure" by Kenneth J. Klingenstein and…

PROCEEDINGS: EIGHTH SYMPOSIUM ON THE TRANSFER AND UTILIZATION OF PARTICULATE CONTROL TECHNOLOGY - VOLUME 2. BAGHOUSES AND PARTICULATE CONTROL FOR NEW APPLICATIONS

EPA Science Inventory

The two-volume proceedings describe the latest research and development efforts to improve particulate control devices, while treating traditional concerns of operational cost and compliance. Overall, particulate control remains a key issue in the cost and applicability of furnac...

Connecting to Learn: Promoting Digital Equity among America's Hispanic Families

ERIC Educational Resources Information Center

Katz, Vikki S.; Levine, Michael H.

2015-01-01

This brief combines original research and policy analysis to examine a key issue that is often overlooked in debates about the proliferation of new technologies, education, and equity: the potential for digital media investments to support a promising learning pathway for children in our nation's increasingly diverse, low-income families. A…

Integrating Healthcare Ethical Issues into IS Education

ERIC Educational Resources Information Center

Cellucci, Leigh W.; Layman, Elizabeth J.; Campbell, Robert; Zeng, Xiaoming

2011-01-01

Federal initiatives are encouraging the increase of IS graduates to work in the healthcare environment because they possess knowledge of datasets and dataset management that are key to effective management of electronic health records (EHRs) and health information technology (IT). IS graduates will be members of the healthcare team, and as such,…

Investing in People: The Human Capital Needs of Rural America. Rural Studies Series.

ERIC Educational Resources Information Center

Beaulieu, Lionel J., Ed.; Mulkey, David, Ed.

This book provides an overview of existing human resource conditions in rural America; examines key economic, social, and technological forces shaping the future viability of rural areas; describes human capital issues for rural women and minority groups; and outlines strategies to strengthen rural human capital resources. Chapters are: (1)…

Administrative Aspects of Third World Library Development: The Five "Pillars" of Sustainable Information Transfer.

ERIC Educational Resources Information Center

Emerson, Susan Vince; And Others

Third World libraries, as a rule, receive information technology, technical assistance, and training as part of international development projects. Library improvements and their intended objective, information transfer, are more effective and lasting if key administrative and policy issues are addressed by the projects. Critical success factors…

Utilization of point soil moisture measurements for field scale soil moisture averages and variances in agricultural landscapes

USDA-ARS?s Scientific Manuscript database

Soil moisture is a key variable in understanding the hydrologic processes and energy fluxes at the land surface. In spite of new technologies for in-situ soil moisture measurements and increased availability of remotely sensed soil moisture data, scaling issues between soil moisture observations and...

Backlash, Backwater, or Back to the Drawing Board: Feminist Thinking and Librarianship in the 1990s.

ERIC Educational Resources Information Center

Pritchard, Sarah

1994-01-01

Discusses the feminist perspective of librarianship, including following key issues: salaries, pay equity, and occupational segregation; faculty status, professional education, and recruitment; access to information; technology; and sociology of the workplace. A number of myths relating to this topic are addressed, and a bibliography of 18 recent…

Integration of Computers in Education: A Curriculum Perspective.

ERIC Educational Resources Information Center

Plomp, Tjeerd

This discussion of a major problem area in education--the curricular and implementation aspects of the application of the computer or new information technologies--focuses first on the use and integration of computers in existing courses or subjects in the curriculum, and defines some key terms. The next section considers issues in the…

Educational Media in Asia. Perspectives on Distance Education

ERIC Educational Resources Information Center

Reddi, Usha V., Ed.; Mishra, Sanjaya, Ed.

2005-01-01

This is the first book to survey the region's use of educational media and summarise the experiences of different Commonwealth Asian countries in one collection. It includes a review of the key issues, country studies, research reviews and several case studies on harnessing technologies for distance-learning initiatives. The book is designed to…

Social Software for Life-Long Learning

ERIC Educational Resources Information Center

Klamma, Ralf; Chatti, Mohamed Amine; Duval, Erik; Hummel, Hans; Hvannberg, Ebba Thora; Kravcik, Milos; Law, Effie; Naeve, Ambjorn; Scott, Peter

2007-01-01

Life-long learning is a key issue for our knowledge society. With social software systems new heterogeneous kinds of technology enhanced informal learning are now available to the life-long learner. Learners outside of learning institutions now have access to powerful social communities of experts and peers who are together forging a new web 2.0.…

Woody biomass pretreatment for cellulosic ethanol production : technology and energy consumption evaluation

Treesearch

Junyong Zhu; X.J. Pan

2010-01-01

This review presents a comprehensive discussion of the key technical issues in woody biomass pretreatment: barriers to efficient cellulose saccharification, pretreatment energy consumption, in particular energy consumed for wood-size reduction, and criteria to evaluate the performance of a pretreatment. A post-chemical pretreatment size-reduction approach is proposed...

Secure and Robust Overlay Content Distribution

ERIC Educational Resources Information Center

Kang, Hun Jeong

2010-01-01

With the success of applications spurring the tremendous increase in the volume of data transfer, efficient and reliable content distribution has become a key issue. Peer-to-peer (P2P) technology has gained popularity as a promising approach to large-scale content distribution due to its benefits including self-organizing, load-balancing, and…

Ethical Considerations Regarding the Use of Smart Home Technologies for Older Adults: An Integrative Review.

PubMed

Chung, Jane; Demiris, George; Thompson, Hilaire J

2016-01-01

With the wide adoption and use of smart home applications, there is a need for examining ethical issues regarding smart home use at the intersection of aging, technology, and home environment. The purpose of this review is to provide an overview of ethical considerations and the evidence on these ethical issues based on an integrative literature review with regard to the utilization of smart home technologies by older adults and their family members. REVIEW DESIGN AND METHODS: We conducted an integrative literature review of the scientific literature from indexed databases (e. g., MEDLINE, CINAHL, and PsycINFO). The framework guiding this review is derived from previous work on ethical considerations related to telehealth use for older adults and smart homes for palliative care. Key ethical issues of the framework include privacy, informed consent, autonomy, obtrusiveness, equal access, reduction in human touch, and usability. Six hundred and thirty-five candidate articles were identified between the years 1990 and 2014. Sixteen articles were included in the review. Privacy and obtrusiveness issues appear to be the most important factors that can affect smart home technology adoption. In addition, this article recommends that stigmatization and reliability and maintenance of the system are additional factors to consider. When smart home technology is used appropriately, it has the potential to improve quality of life and maintain safety among older adults, ultimately supporting the desire of older adults for aging in place. The ability to respond to potential ethical concerns will be critical to the future development and application of smart home technologies that aim to enhance safety and independence.

Key factors influencing the intention of telecare adoption: an institutional perspective.

PubMed

Liu, Chung-Feng

2011-05-01

The objective of this study was to explore key factors of influence on the adoption of telecare by care institutions. This investigation was based on an extensive Technology-Organization-Environment framework comprising the four constructs of technology, organization, environment, and the project planning as well as corresponding variables. This study utilized a self-administered questionnaire for data collection, focusing on the managers of all 339 nursing homes in Taiwan for the census survey. A total of 70 valid questionnaires yielded a response rate of 20.65%. After analyzing the responses through the Partial Least Squares approach, government support, technological knowledge, supplier support, team skills, and compatibility were found to be the five key factors that positively impact intention to adopt telecare from an institutional perspective. The results of this study indicated that care institutions, for the most part, are willing to develop telecare and are already incorporating preliminary applications of telecare, such as distance learning and resident positioning. Solutions to potential issues related to implementing telecare in practice are also proposed in this study.

Micromachining technology for thermal ink-jet products

NASA Astrophysics Data System (ADS)

Verdonckt-Vandebroek, Sophie

1997-09-01

This paper reviews recent trends and evolutions in the low- end color printing market which is currently dominated by thermal inkjet (TIJ) based products. Micro electromechanical systems technology has been an enabler for the unprecedented cost/performance ratio of these printing products. The generic TIJ operating principles are based on an intimate blend of thermodynamics, fluid dynamics and LSI electronics. The key principles and design issues are outlined and the fabrication of TIJ printheads illustrated with an implementation by the Xerox Corporation.

Impact Assessment and Forecasts of Information and Telecommunications Technologies Applied to Education and Training: Volume III--Annex & Glossary. Analysis of Key Issues for the Orientation of the Work of Sector Actors in the Framework of DELTA.

ERIC Educational Resources Information Center

Commission of the European Communities, Brussels (Belgium).

This annex to the main report, the third volume in a three volume set, is based on a study performed by the DELTA (Developing European Learning through Technological Advance) unit in parallel with the projects underway in the research and development Exploratory Action. It provides an assessment of the world situation in flexible and distance…

Interoperability for Space Mission Monitor and Control: Applying Technologies from Manufacturing Automation and Process Control Industries

NASA Technical Reports Server (NTRS)

Jones, Michael K.

1998-01-01

Various issues associated with interoperability for space mission monitor and control are presented in viewgraph form. Specific topics include: 1) Space Project Mission Operations Control Architecture (SuperMOCA) goals and methods for achieving them; 2) Specifics on the architecture: open standards ad layering, enhancing interoperability, and promoting commercialization; 3) An advertisement; 4) Status of the task - government/industry cooperation and architecture and technology demonstrations; and 5) Key features of messaging services and virtual devices.

Nursing acceptance of a speech-input interface: a preliminary investigation.

PubMed

Dillon, T W; McDowell, D; Norcio, A F; DeHaemer, M J

1994-01-01

Many new technologies are being developed to improve the efficiency and productivity of nursing staffs. User acceptance is a key to the success of these technologies. In this article, the authors present a discussion of nursing acceptance of computer systems, review the basic design issues for creating a speech-input interface, and report preliminary findings of a study of nursing acceptance of a prototype speech-input interface. Results of the study showed that the 19 nursing subjects expressed acceptance of the prototype speech-input interface.

Application of Ethics for Providing Telemedicine Services and Information Technology

PubMed Central

Langarizadeh, Mostafa; Moghbeli, Fatemeh; Aliabadi, Ali

2017-01-01

Introduction: Advanced technology has increased the use of telemedicine and Information Technology (IT) in treating or rehabilitating diseases. An increased use of technology increases the importance of the ethical issues involved. The need for keeping patients’ information confidential and secure, controlling a number of therapists’ inefficiency as well as raising the quality of healthcare services necessitates adequate heed to ethical issues in telemedicine provision. Aim: The goal of this review is gathering all articles that are published through 5 years until now (2012-2017) for detecting ethical issues for providing telemedicine services and Information technology. The reason of this time is improvement of telemedicine and technology through these years. This article is important for clinical practice and also to world, because of knowing ethical issues in telemedicine and technology are always important factors for physician and health providers. Material and methods: the required data in this research were derived from published electronic sources and credible academic articles published in such databases as PubMed, Scopus and Science Direct. The following key words were searched for in separation and combination: tele-health, telemedicine, ethical issues in telemedicine. A total of 503 articles were found. After excluding the duplicates (n= 93), the titles and abstracts of 410 articles were skimmed according to the inclusion criteria. Finally, 64 articles remained. They were reviewed in full text and 36 articles were excluded. At the end, 28 articles were chosen which met our eligibility criteria and were included in this study. Results: Ethics has been of a great significance in IT and telemedicine especially the Internet since there are more chances provided for accessing information. It is, however, accompanied by a threat to patients’ personal information. Therefore, suggestions are made to investigate ethics in technology, to offer standards and guidelines to therapists. Due to the advancement in technology, access to information has become simpler than the past. This has prompted hackers to seize the opportunity. Discussion: This research shows that the ethical issues in telemedicine can be investigated from several aspects like technology, doctor-patient relationship, data confidentiality and security, informed consent, patient’s and family’s satisfaction with telemedicine services. Following ethical issues in telemedicine is a primary aspect of high quality services. In other words, if therapists abide by ethical rules, they can provide better services for patients. Attention to ethical issues in telemedicine guarantees a safer use of the services. PMID:29284905

Medical technologies: flows, frictions and new socialities

PubMed Central

Hardon, Anita; Moyer, Eileen

2014-01-01

While social scientists often highlight the way medical technologies mediate biomedical hegemony, this special issue focuses on the creative and often unexpected ways in which medical technologies are appropriated by diverse actors in homes, clinics and communities. The authors highlight key insights from twelve ethnographic case studies conducted in North and South America, Western Europe, Sub-Saharan Africa and Southeast Asia. The case studies focus on, among other issues, how sperm donors in Denmark, despite being subjugated to medical surveillance, experience the act of donating sperm as liberating; how sex workers in Indonesia turn to psychoactive painkillers to feel confident when approaching clients; why some anorexic patients in the United States resist prescribed antidepressant drugs; and how adolescent sex education workshops in Ecuador are appropriated by mothers to monitor their daughters and shame their ‘lying husbands’. Hardon and Moyer conclude that studies of medical technology need to be sensitive to the micro-dynamics of power, the specificities of local markets in which medical technologies generate value, the social and intergenerational relations in which they are embedded, and their intersections with class hierarchies. PMID:25175289

Pilot/Controller Coordinated Decision Making in the Next Generation Air Transportation System

NASA Technical Reports Server (NTRS)

Bearman, Chris; Miller, Ronald c.; Orasanu, Judith M.

2011-01-01

Introduction: NextGen technologies promise to provide considerable benefits in terms of enhancing operations and improving safety. However, there needs to be a thorough human factors evaluation of the way these systems will change the way in which pilot and controllers share information. The likely impact of these new technologies on pilot/controller coordinated decision making is considered in this paper using the "operational, informational and evaluative disconnect" framework. Method: Five participant focus groups were held. Participants were four experts in human factors, between x and x research students and a technical expert. The participant focus group evaluated five key NextGen technologies to identify issues that made different disconnects more or less likely. Results: Issues that were identified were: Decision Making will not necessarily improve because pilots and controllers possess the same information; Having a common information source does not mean pilots and controllers are looking at the same information; High levels of automation may lead to disconnects between the technology and pilots/controllers; Common information sources may become the definitive source for information; Overconfidence in the automation may lead to situations where appropriate breakdowns are not initiated. Discussion: The issues that were identified lead to recommendations that need to be considered in the development of NextGen technologies. The current state of development of these technologies provides a good opportunity to utilize recommendations at an early stage so that NextGen technologies do not lead to difficulties in resolving breakdowns in coordinated decision making.

Pharmacology podcasts: a qualitative study of non-medical prescribing students' use, perceptions and impact on learning.

PubMed

Meade, Oonagh; Bowskill, Dianne; Lymn, Joanne S

2011-01-11

There is growing research on student use of podcasts in academic settings. However, there is little in-depth research focusing on student experience of podcasts, in particular in terms of barriers to, and facilitators of, podcast use and students' perceptions of the usefulness of podcasts as learning tools. This study aimed to explore the experiences of non-medical prescribing students who had access to podcasts of key pharmacology lectures as supplementary learning tools to their existing course materials. Semi-structured interviews were carried out with seven non-medical prescribing students (average age = 43 years), all of whom were nurses, who had access to seven podcasts of key pharmacology lectures. These podcasts took the form of downloadable audio lecture recordings available through the virtual learning environment WebCT. Low, medium and high users of the podcasts took part in the interviews in order to access a variety of student experiences. Interview data was analysed using thematic template analysis to identify key themes surrounding student experience of podcast availability, particularly in relation to barriers to and facilitators of podcast use, and students' experiences of podcasts as a learning tool. Students used podcasts for a variety of reasons such as revisiting lectures, preparing for exams, to clarify or revise specific topics and, to a lesser extent, to catch up on a missed lecture. Barriers to podcast use centred mainly around technological issues. Lack of experience of the technology required to access podcasts proved a barrier for some students. A lack of access to suitable technology was also a reported barrier. Family assistance and I.T. assistance from the university helped facilitate students' use of the podcasts. Students found that using podcasts allowed them to have greater control over their learning and to gauge their learning needs, as well as helping them build their understanding of a complex topic. Students used podcasts for a variety of reasons. Barriers to podcasts use were generally related to technological issues. Students often found that once assistance had been gained regarding these technological issues, they accessed the podcasts more easily. Students felt that access to podcasts added value to their learning materials by allowing them to better manage their learning and build their understanding. Podcasts represent a valuable additional learning tool for this specific group of older students.

Pharmacology podcasts: a qualitative study of non-medical prescribing students' use, perceptions and impact on learning

PubMed Central

2011-01-01

Background There is growing research on student use of podcasts in academic settings. However, there is little in-depth research focusing on student experience of podcasts, in particular in terms of barriers to, and facilitators of, podcast use and students' perceptions of the usefulness of podcasts as learning tools. This study aimed to explore the experiences of non-medical prescribing students who had access to podcasts of key pharmacology lectures as supplementary learning tools to their existing course materials. Methods Semi-structured interviews were carried out with seven non-medical prescribing students (average age = 43 years), all of whom were nurses, who had access to seven podcasts of key pharmacology lectures. These podcasts took the form of downloadable audio lecture recordings available through the virtual learning environment WebCT. Low, medium and high users of the podcasts took part in the interviews in order to access a variety of student experiences. Interview data was analysed using thematic template analysis to identify key themes surrounding student experience of podcast availability, particularly in relation to barriers to and facilitators of podcast use, and students' experiences of podcasts as a learning tool. Results Students used podcasts for a variety of reasons such as revisiting lectures, preparing for exams, to clarify or revise specific topics and, to a lesser extent, to catch up on a missed lecture. Barriers to podcast use centred mainly around technological issues. Lack of experience of the technology required to access podcasts proved a barrier for some students. A lack of access to suitable technology was also a reported barrier. Family assistance and I.T. assistance from the university helped facilitate students' use of the podcasts. Students found that using podcasts allowed them to have greater control over their learning and to gauge their learning needs, as well as helping them build their understanding of a complex topic. Conclusions Students used podcasts for a variety of reasons. Barriers to podcasts use were generally related to technological issues. Students often found that once assistance had been gained regarding these technological issues, they accessed the podcasts more easily. Students felt that access to podcasts added value to their learning materials by allowing them to better manage their learning and build their understanding. Podcasts represent a valuable additional learning tool for this specific group of older students. PMID:21223547

Progress in Fire Detection and Suppression Technology for Future Space Missions

NASA Technical Reports Server (NTRS)

Friedman, Robert; Urban, David L.

2000-01-01

Fire intervention technology (detection and suppression) is a critical part of the strategy of spacecraft fire safety. This paper reviews the status, trends, and issues in fire intervention, particularly the technology applied to the protection of the International Space Station and future missions beyond Earth orbit. An important contribution to improvements in spacecraft fire safety is the understanding of the behavior of fires in the non-convective (microgravity) environment of Earth-orbiting and planetary-transit spacecraft. A key finding is the strong influence of ventilation flow on flame characteristics, flammability limits and flame suppression in microgravity. Knowledge of these flow effects will aid the development of effective processes for fire response and technology for fire suppression.

Authenticated multi-user quantum key distribution with single particles

NASA Astrophysics Data System (ADS)

Lin, Song; Wang, Hui; Guo, Gong-De; Ye, Guo-Hua; Du, Hong-Zhen; Liu, Xiao-Fen

2016-03-01

Quantum key distribution (QKD) has been growing rapidly in recent years and becomes one of the hottest issues in quantum information science. During the implementation of QKD on a network, identity authentication has been one main problem. In this paper, an efficient authenticated multi-user quantum key distribution (MQKD) protocol with single particles is proposed. In this protocol, any two users on a quantum network can perform mutual authentication and share a secure session key with the assistance of a semi-honest center. Meanwhile, the particles, which are used as quantum information carriers, are not required to be stored, therefore the proposed protocol is feasible with current technology. Finally, security analysis shows that this protocol is secure in theory.

What principles should govern the use of managed entry agreements?

PubMed

Klemp, Marianne; Frønsdal, Katrine B; Facey, Karen

2011-01-01

To ensure rapid access to new potentially beneficial health technologies, obtain best value for money, and ensure affordability, healthcare payers are adopting a range of innovative reimbursement approaches that may be called Managed Entry Agreements (MEAs). The Health Technology Assessment International (HTAi) Policy Forum sought to identify why MEAs might be used, issues associated with implementation and develop principles for their use. A 2-day deliberative workshop discussed key papers, members' experiences, and collectively addressed four policy questions that resulted in this study. MEAs are used to give access to new technologies where traditional reimbursement is deemed inappropriate. Three different forms of MEAs have been identified: management of budget impact, management of uncertainty relating to clinical and/or cost-effectiveness, and management of utilization to optimize performance. The rationale for using these approaches and their advantages and disadvantages differ. However, all forms of MEA should take the form of a formal written agreement among stakeholders, clearly identifying the rationale for the agreement, aspects to be assessed, methods of data collection and review, and the criteria for ending the agreement. MEAs should only be used when HTA identifies issues or concerns about key outcomes and/or costs and/or organizational/budget impacts that are material to a reimbursement decision. They provide patient access and can be useful to manage technology diffusion and optimize use. However, they are administratively complex and may be difficult to negotiate and their effectiveness has yet to be evaluated.

Emerging issues and current trends in assistive technology use 2007-2010: practising, assisting and enabling learning for all.

PubMed

Abbott, Chris; Brown, David; Evett, Lindsay; Standen, Penny

2014-11-01

Following an earlier review in 2007, a further review of the academic literature relating to the uses of assistive technology (AT) by children and young people was completed, covering the period 2007-2011. As in the earlier review, a tripartite taxonomy: technology uses to train or practise, technology uses to assist learning and technology uses to enable learning, was used in order to structure the findings. The key markers for research in this field and during these three years were user involvement, AT on mobile mainstream devices, the visibility of AT, technology for interaction and collaboration, new and developing interfaces and inclusive design principles. The paper concludes by locating these developments within the broader framework of the Digital Divide.

X-43D Conceptual Design and Feasibility Study

NASA Technical Reports Server (NTRS)

Johnson, Donald B.; Robinson, Jeffrey S.

2005-01-01

NASA s Next Generation Launch Technology (NGLT) Program, in conjunction with the office of the Director of Defense Research and Engineering (DDR&E), developed an integrated hypersonic technology demonstration roadmap. This roadmap is an integral part of the National Aerospace Initiative (NAI), a multi-year, multi-agency cooperative effort to invest in and develop, among other things, hypersonic technologies. This roadmap contains key ground and flight demonstrations required along the path to developing a reusable hypersonic space access system. One of the key flight demonstrations required for systems that will operate in the high Mach number regime is the X-43D. As currently conceived, the X-43D is a Mach 15 flight test vehicle that incorporates a hydrogen-fueled scramjet engine. The purpose of the X-43D is to gather high Mach number flight environment and engine operability information which is difficult, if not impossible, to gather on the ground. During 2003, the NGLT Future Hypersonic Flight Demonstration Office initiated a feasibility study on the X-43D. The objective of the study was to develop a baseline conceptual design, assess its performance, and identify the key technical issues. The study also produced a baseline program plan, schedule, and cost, along with a list of key programmatic risks.

Mars Aerocapture Systems Study

NASA Technical Reports Server (NTRS)

Wright, Henry S.; Oh, David Y.; Westhelle, Carlos H.; Fisher, Jody L.; Dyke, R. Eric; Edquist, Karl T.; Brown, James L.; Justh, Hilary L.; Munk, Michelle M.

2006-01-01

Mars Aerocapture Systems Study (MASS) is a detailed study of the application of aerocapture to a large Mars robotic orbiter to assess and identify key technology gaps. This study addressed use of an Opposition class return segment for use in the Mars Sample Return architecture. Study addressed mission architecture issues as well as system design. Key trade studies focused on design of aerocapture aeroshell, spacecraft design and packaging, guidance, navigation and control with simulation, computational fluid dynamics, and thermal protection system sizing. Detailed master equipment lists are included as well as a cursory cost assessment.

Measuring Conditions and Consequences of Tracking in the High School Curriculum

ERIC Educational Resources Information Center

Archbald, Doug; Keleher, Julia

2008-01-01

Despite a decade of advocacy and advances in technology, data driven decision making remains an elusive vision for most high schools. This article identifies key data systems design needs and presents methods for monitoring, managing, and improving programs. Because of its continuing salience, we focus on the issue of tracking (ability grouping).…

The Need for a Strategic Foundation for Digital Learning and Knowledge Management Solutions

ERIC Educational Resources Information Center

Asgarkhani, Mehdi

2004-01-01

This paper elaborates on the importance of a strategic foundation when digital learning or knowledge management (KM) solutions are planned and developed. It looks at some key issues of e-Learning and knowledge management (KM) through discussing the various stages (technologies) and potential benefits of e-Learning; the state of the e-Learning…

Teaching Energy Concepts by Working on Themes of Cultural and Environmental Value

ERIC Educational Resources Information Center

Besson, Ugo; De Ambrosis, Anna

2014-01-01

Energy is a central topic in physics and a key concept for understanding the physical, biological and technological worlds. It is a complex topic with multiple connections with different areas of science and with social, environmental and philosophical issues. In this paper we discuss some aspects of the teaching and learning of the energy…

Computing the Average Square: An Agent-Based Introduction to Aspects of Current Psychometric Practice

ERIC Educational Resources Information Center

Stroup, Walter M.; Hills, Thomas; Carmona, Guadalupe

2011-01-01

This paper summarizes an approach to helping future educators to engage with key issues related to the application of measurement-related statistics to learning and teaching, especially in the contexts of science, mathematics, technology and engineering (STEM) education. The approach we outline has two major elements. First, students are asked to…

Maintaining Professional Competence. Approaches to Career Enhancement, Vitality, and Success throughout a Work Life.

ERIC Educational Resources Information Center

Willis, Sherry L., Ed.; Dubin, Samuel S., Ed.

In response to the issues of global competition, the aging workforce, and the rapid rate of technological innovation and how today's professionals must meet these challenges, an examination is made of the key developmental approaches to maintaining and enhancing the knowledge and skills of midcareer and senior-level professionals. Twenty-one…

Spellings Joins Passage to India on Education: Trip Tied to Initiatives on Competitiveness Issues

ERIC Educational Resources Information Center

Klein, Alyson

2006-01-01

Secretary of Education Margaret Spellings and several key senators traveled to India last week to examine how that country, whose schools generally have fewer resources than those in the United States, has managed to produce top-notch engineers and technology professionals. Secretary Spellings arrived in India early in the week and met with…

Redox flow cell development and demonstration project, calendar year 1977

NASA Technical Reports Server (NTRS)

1979-01-01

Research and development on the redox flow cell conducted from January 1, 1977, to December 31, 1977, are described in this report. The major focus of the effort during 1977 was the key technology issues that directly influence the fundamental feasibility of the overall redox concept. These issues were the development of a suitable ion exchange membrane for the system, the screening and study of candidate redox couples to achieve optimum cell performance, and the carrying out of systems analysis and modeling to develop system performance goals and cost estimates.

Who reaps the benefits, who bears the risks? Comparative optimism, comparative utility, and regulatory preferences for mobile phone technology.

PubMed

White, Mathew P; Eiser, J Richard; Harris, Peter R; Pahl, Sabine

2007-06-01

Although the issue of risk target (e.g., self, others, children) is widely acknowledged in risk perception research, its importance appears underappreciated. To date, most research has been satisfied with demonstrating comparative optimism, i.e., lower perceived risk for the self than others, and exploring its moderators, such as perceived controllability and personal exposure. Much less research has investigated how the issue of target may affect benefit perceptions or key outcomes such as stated preferences for hazard regulation. The current research investigated these issues using data from a public survey of attitudes toward mobile phone technology (N= 1,320). First, results demonstrated comparative optimism for this hazard, and also found moderating effects of both controllability and personal exposure. Second, there was evidence of comparative utility, i.e., users believed that the benefits from mobile phone technology are greater for the self than others. Third, and most important for policy, preferences for handset regulation were best predicted by perceptions of the risks to others but perceived benefits for the self. Results suggest a closer awareness of target can improve prediction of stated preferences for hazard regulation and that it would be profitable for future research to pay more attention to the issue of target for both risk and benefit perceptions.

Ge-Photodetectors for Si-Based Optoelectronic Integration

PubMed Central

Wang, Jian; Lee, Sungjoo

2011-01-01

High speed photodetectors are a key building block, which allow a large wavelength range of detection from 850 nm to telecommunication standards at optical fiber band passes of 1.3–1.55 μm. Such devices are key components in several applications such as local area networks, board to board, chip to chip and intrachip interconnects. Recent technological achievements in growth of high quality SiGe/Ge films on Si wafers have opened up the possibility of low cost Ge-based photodetectors for near infrared communication bands and high resolution spectral imaging with high quantum efficiencies. In this review article, the recent progress in the development and integration of Ge-photodetectors on Si-based photonics will be comprehensively reviewed, along with remaining technological issues to be overcome and future research trends. PMID:22346598

Effect of culture on acceptance of telemedicine in Middle Eastern countries: case study of Jordan and Syria.

PubMed

Alajlani, Mohannad; Clarke, Malcolm

2013-04-01

We investigated issues that affect the use and adoption of telemedicine in Middle Eastern countries, taking the Hashemite Kingdom of Jordan and the Syrian Arab Republic as case studies. Our study is based on interviews with key stakeholders (including doctors, technicians, engineers, and decision makers) and questionnaires administered to key stakeholders (including patients), ensuring opinion was gained from people from a full range of backgrounds and roles in the healthcare system. We found doctor and patient resistance was a major issue preventing the adoption of telemedicine in both countries, followed by poor infrastructure, lack of funding, and lack of information technology training. Our research identifies that culture is a greater issue than technical matters for the adoption of telemedicine in Middle Eastern countries. Based on our preliminary results we developed a guideline framework for each country that might be applied to telemedicine projects at the pre-implementation phase. The proposed guideline framework was validated through a return visit to the stakeholders and seeking further opinion.

Gutter oil: an overview of Chinese food safety issues and policies.

PubMed

Li, Jia; Cui, Naixue; Liu, Jianghong

2017-09-01

Food safety has become a focus of attention worldwide. In China, one of the top concerns in food safety is gutter oil, known as 'swill-cooked oil'. This Commentary summarizes the key incidents disclosed to the public by the media, and the policies regarding gutter oil at national, regional, and provincial or city levels. Several challenges the country still faces in tackling this issue are identified, including a lack of evaluation of the implementation and effect of the policies, a lack of effective technology to detect and recycle gutter oil, and the overlooking of the hazardous effect of gutter oil on health. This commentary suggests that strengthening policy implementation and evaluation, improving measurement and recycling technologies, and launching public health campaigns would help eliminate gutter oil from dining tables.

3D printing awareness: the future of making things

NASA Astrophysics Data System (ADS)

Valpreda, F.

2015-03-01

The advent of 3D printing is giving us new production opportunities but is creating new economic and social assets. In the paper we will analyze the new conditions we will live in. The current industrial production scenario will be analyzed to see how it works and how 3D printing is being introduced into it: where the traditional production comes from and how it actually works, from the historical, technological, social and economic point of view, including transports of materials and products. This asset is being "polluted" and possibly transformed by 3D printing: what is it, how it works, but most important, how this technology is transforming our personal approach to industrial products. This technological innovation will transform our lives, possibly even more than how movable type printing did: we will see the opportunities offered to adopt this innovation not only for our everyday life, but also looking forward for environmental issues, (e)commerce reorganization and social quality improvement. In the final part we will also see what will be the keys to open a new kind of developing path, where technology will take an important part, what relationship with it humans will have, and which will be the keys to succeed in this challenge, identifying in knowledge, awareness and culture of innovation those keys.

Green survivability in Fiber-Wireless (FiWi) broadband access network

NASA Astrophysics Data System (ADS)

Liu, Yejun; Guo, Lei; Gong, Bo; Ma, Rui; Gong, Xiaoxue; Zhang, Lincong; Yang, Jiangzi

2012-03-01

Fiber-Wireless (FiWi) broadband access network is a promising "last mile" access technology, because it integrates wireless and optical access technologies in terms of their respective merits, such as high capacity and stable transmission from optical access technology, and easy deployment and flexibility from wireless access technology. Since FiWi is expected to carry a large amount of traffic, numerous traffic flows may be interrupted by the failure of network components. Thus, survivability in FiWi is a key issue aiming at reliable and robust service. However, the redundant deployment of backup resource required for survivability usually causes huge energy consumption, which aggravates the global warming and accelerates the incoming of energy crisis. Thus, the energy-saving issue should be considered when it comes to survivability design. In this paper, we focus on the green survivability in FiWi, which is an innovative concept and remains untouched in the previous works to our best knowledge. We first review and discuss some challenging issues about survivability and energy-saving in FiWi, and then we propose some instructive solutions for its green survivability design. Therefore, our work in this paper will provide the technical references and research motivations for the energy-efficient and survivable FiWi development in the future.

Technological aspects of hospital communication challenges: an observational study.

PubMed

Popovici, Ilinca; Morita, Plinio P; Doran, Diane; Lapinsky, Stephen; Morra, Dante; Shier, Ashleigh; Wu, Robert; Cafazzo, Joseph A

2015-06-01

To gain insights into how technological communication tools impact effective communication among clinicians, which is critical for patient safety. This multi-site observational study analyzes inter-clinician communication and interaction with information technology, with a focus on the critical process of patient transfer from the Emergency Department to General Internal Medicine. Mount Sinai Hospital, Sunnybrook Health Sciences Centre and Toronto General Hospital. At least five ED and general internal medicine nurses and physicians directly involved in patient transfers were observed on separate occasions at each institution. N/A. N/A. The study provides insight into clinician workflow, evaluates current hospital communication systems and identifies key issues affecting communication: interruptions, issues with numeric pagers, lack of integrated communication tools, lack of awareness of consultation status, inefficiencies related to the paper chart, unintuitive user interfaces, mixed use of electronic and paper systems and lack of up-to-date contact information. It also identifies design trade-offs to be negotiated: synchronous communication vs. reducing interruptions, notification of patient status vs. reducing interruptions and speed vs. quality of handovers. The issues listed should be considered in the design of new technology for hospital communications. © The Author 2015. Published by Oxford University Press in association with the International Society for Quality in Health Care; all rights reserved.

Habitats and Surface Construction Technology and Development Roadmap

NASA Technical Reports Server (NTRS)

Cohen, Marc; Kennedy, Kriss J.

1997-01-01

The vision of the technology and development teams at NASA Ames and Johnson Research Centers is to provide the capability for automated delivery and emplacement of habitats and surface facilities. The benefits of the program are as follows: Composites and Inflatables: 30-50% (goal) lighter than Al Hard Structures; Capability for Increased Habitable Volume, Launch Efficiency; Long Term Growth Potential; and Supports initiation of commercial and industrial expansion. Key Habitats and Surface Construction (H&SC) technology issues are: Habitat Shell Structural Materials; Seals and Mechanisms; Construction and Assembly: Automated Pro-Deploy Construction Systems; ISRU Soil/Construction Equipment: Lightweight and Lower Power Needs; Radiation Protection (Health and Human Performance Tech.); Life Support System (Regenerative Life Support System Tech.); Human Physiology of Long Duration Space Flight (Health and Human Performance Tech.); and Human Psychology of Long Duration Space Flight (Health and Human Performance Tech.) What is being done regarding these issues?: Use of composite materials for X-38 CRV, RLV, etc.; TransHAB inflatable habitat design/development; Japanese corporations working on ISRU-derived construction processes. What needs to be done for the 2004 Go Decision?: Characterize Mars Environmental Conditions: Civil Engineering, Material Durability, etc.; Determine Credibility of Inflatable Structures for Human Habitation; and Determine Seal Technology for Mechanisms and Hatches, Life Cycle, and Durability. An overview encompassing all of the issues above is presented.

The Imperative of Solving Nurses' Usability Problems With Health Information Technology.

PubMed

Staggers, Nancy; Elias, Beth L; Makar, Ellen; Alexander, Gregory L

2018-04-01

Health information technology (IT) usability issues are a key concern for nurse executives and nurses. The aims of this study are to understand usability pain points faced by nurses regarding the use of health IT, identify their impact and importance, discuss responsibilities, and develop possible solutions to improve the health IT-user experience for nurses. Twenty-seven experts were interviewed including nursing leaders, informaticists, executives, engineers, researchers, and human factors experts across acute care, long-term care, and vendor settings. Semistructured questions guided the interviews, and content analysis was used to identify themes. Four themes emerged: 1) user experience pain points, 2) importance of the issues, 3) the responsibility gap, and 4) acting on usability issues. Nurses continue to endure significant health IT-usability issues that negatively impact patients, nurses, and healthcare organizations. Solutions include enhancing the voice of nursing at the national and local levels, creating a digital strategy for nursing, providing incentives to improve usability in health IT, and accelerating the understanding of nurses' work intended to inform and translate nurses' work into health IT design.

Applications of Intelligent Technology to Power System Supervisory Control and Protection Systems

NASA Astrophysics Data System (ADS)

Nagata, Takeshi

Power system supervisory control and protection systems provide utilities with capabilities that are key to a planning business function, i.e., delivering power in a reliable and safe manner. A quality system solution is central to effective operation of a utility's most critical and costly generation, transmission, and distribution assets. The challenging issues for these systems today are not the same as they were few years ago. Today, there is much more placed on integration, use of new IT technologies, and access to information for more purposes. This article presents the topics of intelligent technology to the power system supervisory control and protection systems.

Valve-regulated lead/acid batteries

NASA Astrophysics Data System (ADS)

Rand, D. A. J.; Holden, L. S.; May, G. J.; Newnham, R. H.; Peters, K.

Given the growing importance of valve-regulated lead/acid technology in many existing and emerging market areas, an expert panel was assembled at the Sixth Asian Battery Conference to answer questions from delegates on various technical and operational aspects of such batteries. Key issues included: advantantages; performance and reliability; thermal runaway; and failure modes. The interaction between the audience and the panel was both vigorous and informative. Overwhelmingly, it was agreed that valve-regulated technology has come of age and offers a dynamic solution to many of the world's energy-storage requirements and opportunities.

Tag Content Access Control with Identity-based Key Exchange

NASA Astrophysics Data System (ADS)

Yan, Liang; Rong, Chunming

2010-09-01

Radio Frequency Identification (RFID) technology that used to identify objects and users has been applied to many applications such retail and supply chain recently. How to prevent tag content from unauthorized readout is a core problem of RFID privacy issues. Hash-lock access control protocol can make tag to release its content only to reader who knows the secret key shared between them. However, in order to get this shared secret key required by this protocol, reader needs to communicate with a back end database. In this paper, we propose to use identity-based secret key exchange approach to generate the secret key required for hash-lock access control protocol. With this approach, not only back end database connection is not needed anymore, but also tag cloning problem can be eliminated at the same time.

Implementation science approaches for integrating eHealth research into practice and policy.

PubMed

Glasgow, Russell E; Phillips, Siobhan M; Sanchez, Michael A

2014-07-01

To summarize key issues in the eHealth field from an implementation science perspective and to highlight illustrative processes, examples and key directions to help more rapidly integrate research, policy and practice. We present background on implementation science models and emerging principles; discuss implications for eHealth research; provide examples of practical designs, measures and exemplar studies that address key implementation science issues; and make recommendations for ways to more rapidly develop and test eHealth interventions as well as future research, policy and practice. The pace of eHealth research has generally not kept up with technological advances, and many of our designs, methods and funding mechanisms are incapable of providing the types of rapid and relevant information needed. Although there has been substantial eHealth research conducted with positive short-term results, several key implementation and dissemination issues such as representativeness, cost, unintended consequences, impact on health inequities, and sustainability have not been addressed or reported. Examples of studies in several of these areas are summarized to demonstrate this is possible. eHealth research that is intended to translate into policy and practice should be more contextual, report more on setting factors, employ more responsive and pragmatic designs and report results more transparently on issues important to potential adopting patients, clinicians and organizational decision makers. We outline an alternative development and assessment model, summarize implementation science findings that can help focus attention, and call for different types of more rapid and relevant research and funding mechanisms. Published by Elsevier Ireland Ltd.

Information superhighway: Issues affecting development

NASA Astrophysics Data System (ADS)

1994-09-01

Technological advances in the transmission of voice, video, and data are fostering fundamental changes in the telecommunications industry. For example, large local telephone companies plan to offer video services in competition with cable and broadcast television, while cable television companies plan to offer local telephone service over their wires in competition with the local telephone companies. The administration believes that these technological changes provide the opportunity to develop an 'Information Superhighway' that could provide every element of society with ready access to data, voice, and video communications. Concurrently, the Congress is considering sweeping changes to telecommunications regulations to keep pace with this dynamic industry. GAO prepared this report to serve as an overview of three key issues that decisionmakers may face as they deliberate telecommunications legislation; it focuses on three pivotal issues they face in formulating new telecommunications legislation: (1) managing the transition to a more competitive local telecommunications marketplace; (2) ensuring that all consumers have access to affordable telecommunications as competition develops; and (3) ensuring that the Information Superhighway provides adequate security, privacy, reliability, and interoperability.

A Survey on Energy Conserving Mechanisms for the Internet of Things: Wireless Networking Aspects.

PubMed

Abbas, Zeeshan; Yoon, Wonyong

2015-09-25

The Internet of Things (IoT) is an emerging key technology for future industries and everyday lives of people, where a myriad of battery operated sensors, actuators, and smart objects are connected to the Internet to provide services such as mobile healthcare, intelligent transport system, environmental monitoring, etc. Since energy efficiency is of utmost importance to these battery constrained IoT devices, IoT-related standards and research works have focused on the device energy conserving issues. This paper presents a comprehensive survey on energy conserving issues and solutions in using diverse wireless radio access technologies for IoT connectivity, e.g., the 3rd Generation Partnership Project (3GPP) machine type communications, IEEE 802.11ah, Bluetooth Low Energy (BLE), and Z-Wave. We look into the literature in broad areas of standardization, academic research, and industry development, and structurally summarize the energy conserving solutions based on several technical criteria. We also propose future research directions regarding energy conserving issues in wireless networking-based IoT.

A Survey on Energy Conserving Mechanisms for the Internet of Things: Wireless Networking Aspects

PubMed Central

Abbas, Zeeshan; Yoon, Wonyong

2015-01-01

The Internet of Things (IoT) is an emerging key technology for future industries and everyday lives of people, where a myriad of battery operated sensors, actuators, and smart objects are connected to the Internet to provide services such as mobile healthcare, intelligent transport system, environmental monitoring, etc. Since energy efficiency is of utmost importance to these battery constrained IoT devices, IoT-related standards and research works have focused on the device energy conserving issues. This paper presents a comprehensive survey on energy conserving issues and solutions in using diverse wireless radio access technologies for IoT connectivity, e.g., the 3rd Generation Partnership Project (3GPP) machine type communications, IEEE 802.11ah, Bluetooth Low Energy (BLE), and Z-Wave. We look into the literature in broad areas of standardization, academic research, and industry development, and structurally summarize the energy conserving solutions based on several technical criteria. We also propose future research directions regarding energy conserving issues in wireless networking-based IoT. PMID:26404275

Advances Made in the Next Generation of Satellite Networks

NASA Technical Reports Server (NTRS)

Bhasin, Kul B.

1999-01-01

Because of the unique networking characteristics of communications satellites, global satellite networks are moving to the forefront in enhancing national and global information infrastructures. Simultaneously, broadband data services, which are emerging as the major market driver for future satellite and terrestrial networks, are being widely acknowledged as the foundation for an efficient global information infrastructure. In the past 2 years, various task forces and working groups around the globe have identified pivotal topics and key issues to address if we are to realize such networks in a timely fashion. In response, industry, government, and academia undertook efforts to address these topics and issues. A workshop was organized to provide a forum to assess the current state-of-the-art, identify key issues, and highlight the emerging trends in the next-generation architectures, data protocol development, communication interoperability, and applications. The Satellite Networks: Architectures, Applications, and Technologies Workshop was hosted by the Space Communication Program at the NASA Lewis Research Center in Cleveland, Ohio. Nearly 300 executives and technical experts from academia, industry, and government, representing the United States and eight other countries, attended the event (June 2 to 4, 1998). The program included seven panels and invited sessions and nine breakout sessions in which 42 speakers presented on technical topics. The proceedings covers a wide range of topics: access technology and protocols, architectures and network simulations, asynchronous transfer mode (ATM) over satellite networks, Internet over satellite networks, interoperability experiments and applications, multicasting, NASA interoperability experiment programs, NASA mission applications, and Transmission Control Protocol/Internet Protocol (TCP/IP) over satellite: issues, relevance, and experience.

The Ecology of Exercise: Mechanisms Underlying Individual Variation in Behavior, Activity, and Performance: An Introduction to Symposium.

PubMed

Killen, Shaun S; Calsbeek, Ryan; Williams, Tony D

2017-08-01

Wild animals often engage in intense physical activity while performing tasks vital for their survival and reproduction associated with foraging, avoiding predators, fighting, providing parental care, and migrating. In this theme issue we consider how viewing these tasks as "exercise"-analogous to that performed by human athletes-may help provide insight into the mechanisms underlying individual variation in these types of behaviors and the importance of physical activity in an ecological context. In this article and throughout this issue, we focus on four key questions relevant to the study of behavioral ecology that may be addressed by studying wild animal behavior from the perspective of exercise physiology: (1) How hard do individual animals work in response to ecological (or evolutionary) demands?; (2) Do lab-based studies of activity provide good models for understanding activity in free-living animals and individual variation in traits?; (3) Can animals work too hard during "routine" activities?; and (4) Can paradigms of "exercise" and "training" be applied to free-living animals? Attempts to address these issues are currently being facilitated by rapid technological developments associated with physiological measurements and the remote tracking of wild animals, to provide mechanistic insights into the behavior of free-ranging animals at spatial and temporal scales that were previously impossible. We further suggest that viewing the behaviors of non-human animals in terms of the physical exercise performed will allow us to fully take advantage of these technological advances, draw from knowledge and conceptual frameworks already in use by human exercise physiologists, and identify key traits that constrain performance and generate variation in performance among individuals. It is our hope that, by highlighting mechanisms of behavior and performance, the articles in this issue will spur on further synergies between physiologists and ecologists, to take advantage of emerging cross-disciplinary perspectives and technologies. © The Author 2017. Published by Oxford University Press on behalf of the Society for Integrative and Comparative Biology.

Research Trends in Mobile Learning in Higher Education: A Systematic Review of Articles (2011-2015)

ERIC Educational Resources Information Center

Krull, Greig; Duart, Josep M.

2017-01-01

The potential and use of mobile devices in higher education has been a key issue for educational research and practice since the widespread adoption of these devices. Due to the evolving nature and affordances of mobile technologies, it is an area that requires ongoing investigation. This study aims to identify emerging trends in mobile learning…

Key issues in making and using satellite-based maps in ecology: a primer.

Treesearch

Karin S. Fassnacht; Warren B. Cohen; Thomas A. Spies

2006-01-01

The widespread availability of satellite imagery and image processing software has made it relatively easy for ecologists to use satellite imagery to address questions at the landscape and regional scales. However, as often happens with complex tools that are rendered easy to use by computer software, technology may be misused or used without an understanding of some...

PNNLs Data Intensive Computing research battles Homeland Security threats

ScienceCinema

David Thurman; Joe Kielman; Katherine Wolf; David Atkinson

2018-05-11

The Pacific Northwest National Laboratorys (PNNL's) approach to data intensive computing (DIC) is focused on three key research areas: hybrid hardware architecture, software architectures, and analytic algorithms. Advancements in these areas will help to address, and solve, DIC issues associated with capturing, managing, analyzing and understanding, in near real time, data at volumes and rates that push the frontiers of current technologies.

An Open IMS-Based User Modelling Approach for Developing Adaptive Learning Management Systems

ERIC Educational Resources Information Center

Boticario, Jesus G.; Santos, Olga C.

2007-01-01

Adaptive LMS have not yet reached the eLearning marketplace due to methodological, technological and management open issues. At aDeNu group, we have been working on two key challenges for the last five years in related research projects. Firstly, develop the general framework and a running architecture to support the adaptive life cycle (i.e.,…

Staff Report on the Hispanic Access to Higher Education of the Committee on Education and Labor. House of Representatives, Ninety-Ninth Congress, First Session.

ERIC Educational Resources Information Center

Congress of the U.S., Washington, DC. House Committee on Education and Labor.

Key issues affecting Hispanic participation in higher education are evaluated, with attention to access, retention, and transfer. Societal factors influencing access are also covered: migration, technology, employment and income levels, and secondary schooling. In addition, postsecondary education in Puerto Rico is addressed. Hispanics constitute…

Raising the Awareness of Children on Global Issues

NASA Astrophysics Data System (ADS)

Korczynska, Audrey

2016-08-01

Space Awareness uses the excitement and challenges of space to interest young people into science and technology and develop their sense of European and global citizenship. Latest news and key advancements of the European space initiatives greatly contribute to it, showing the applications that space sciences have in the everyday life and how understanding the Universe can help understanding our own planet.

A Framework for K-12 Science Education: Practices, Crosscutting Concepts, and Core Ideas

ERIC Educational Resources Information Center

National Academies Press, 2012

2012-01-01

Science, engineering, and technology permeate nearly every facet of modern life and hold the key to solving many of humanity's most pressing current and future challenges. The United States' position in the global economy is declining, in part because U.S. workers lack fundamental knowledge in these fields. To address the critical issues of U.S.…

Strategies for integrating computer-based activities into your educational environment: a practical guide.

PubMed Central

Miller, J G; Wolf, F M

1996-01-01

Strategies for implementing instructional technology are based on recent experiences at the University of Michigan Medical Center. The issues covered include 1) addressing facilities, hardware, and staffing needs, 2) determining learners' skill requirements and appropriate training activities, and 3) selecting and customizing educational software. Many examples are provided, and nine key points for success are emphasized. PMID:8653447

Afterschool: A Natural Platform for Career Development. Afterschool Alert. Issue Brief No. 19

ERIC Educational Resources Information Center

Afterschool Alliance, 2004

2004-01-01

As technology evolves and the economy changes, greater demands will be placed on the workforce of the future. Myriad opportunities are and will be available to those who have the knowledge and the skills to meet those challenges. Afterschool programs offer a key opportunity to expose students to ideas and teach them skills that can unlock doors to…

The DHS Directorate of Science and Technology: Key Issues for Congress

DTIC Science & Technology

2009-06-22

recently under the authority of the Homeland Security Act. Environmental Measurements Laboratory The Environmental Measurements Laboratory ( EML ) in...Historically, the focus of EML was detection and monitoring of low-level radiation releases. The transfer of EML to the S&T Directorate required a realignment...debated whether EML is most appropriately positioned in 7 EML realignment and related

Mobilizing Learning: A Thematic Review of Apps in K-12 and Higher Education

ERIC Educational Resources Information Center

Stevenson, Michael Eric; Hedberg, John Gordon

2017-01-01

Purpose: This paper presents a thematic review of app-enabled learning in the context of recent developments in mobile technology and m-learning. Three key themes are presented that reflect the issues that teachers, school leaders and systems have grappled with in recent years. Design/Methodology/Approach: Drawing on findings from a range of case…

Accounting Control Technology Using SAP: A Case-Based Approach

ERIC Educational Resources Information Center

Ragan, Joseph; Puccio, Christopher; Talisesky, Brandon

2014-01-01

The Sarbanes-Oxley Act (SOX) revolutionized the accounting and audit industry. The use of preventative and process controls to evaluate the continuous audit process done via an SAP ERP ECC 6.0 system is key to compliance with SOX and managing costs. This paper can be used in a variety of ways to discuss issues associated with auditing and testing…

Toward Ubiquitous BCIs

NASA Astrophysics Data System (ADS)

Allison, Brendan Z.

The preceding chapters in this book described modern BCI systems. This concluding chapter instead discusses future directions. While there are some specific predictions, I mainly analyze key factors and trends relating to practical mainstream BCI development. While I note some disruptive technologies that could dramatically change BCIs, this chapter focuses mainly on realistic, incremental progress and how progress could affect user groups and ethical issues.

PNNL pushing scientific discovery through data intensive computing breakthroughs

ScienceCinema

Deborah Gracio; David Koppenaal; Ruby Leung

2018-05-18

The Pacific Northwest National Laboratory's approach to data intensive computing (DIC) is focused on three key research areas: hybrid hardware architectures, software architectures, and analytic algorithms. Advancements in these areas will help to address, and solve, DIC issues associated with capturing, managing, analyzing and understanding, in near real time, data at volumes and rates that push the frontiers of current technologies.

Inequalities in Students' Choice of STEM Subjects: An Exploration of Intersectional Relationships. CLS Working Paper 2015/6

ERIC Educational Resources Information Center

Codiroli, Natasha

2015-01-01

The relative lack of students studying post-compulsory STEM (Science, Technology, Engineering and Mathematics) subjects is a key policy concern. A particular issue is the disparities in uptake by students' family background, gender and ethnicity. It remains unclear whether the effects of family background can be explained by academic disparities,…

Privacy and Security within Biobanking: The Role of Information Technology.

PubMed

Heatherly, Raymond

2016-03-01

Along with technical issues, biobanking frequently raises important privacy and security issues that must be resolved as biobanks continue to grow in scale and scope. Consent mechanisms currently in use range from fine-grained to very broad, and in some cases participants are offered very few privacy protections. However, developments in information technology are bringing improvements. New programs and systems are being developed to allow researchers to conduct analyses without distributing the data itself offsite, either by allowing the investigator to communicate with a central computer, or by having each site participate in meta-analysis that results in a shared statistic or final significance result. The implementation of security protocols into the research biobanking setting requires three key elements: authentication, authorization, and auditing. Authentication is the process of making sure individuals are who they claim to be, frequently through the use of a password, a key fob, or a physical (i.e., retinal or fingerprint) scan. Authorization involves ensuring that every individual who attempts an action has permission to do that action. Finally, auditing allows for actions to be logged so that inappropriate or unethical actions can later be traced back to their source. © 2016 American Society of Law, Medicine & Ethics.

An exploratory investigation of barriers and enablers affecting investment in renewable companies and technologies in the UK

PubMed Central

Wells, Victoria; Greenwell, Felicity; Covey, Judith; Rosenthal, Harriet E. S.; Adcock, Mike; Gregory-Smith, Diana

2013-01-01

The last few years have seen considerable research expenditure on renewable fuel technologies. However, in many cases, the necessary sustained and long-term funding from the investment community has not been realized at a level needed to allow technologies to become reality. According to global consulting firm Deloitte's recent renewable energy report (http://www.deloitte.com/energypredictions2012), many renewable energy projects stalled or were not completed because of issues including the global economy, the state of government finances, difficulties in funding and regulatory uncertainty. This investigation concentrates on the funding aspect and explores the perceived barriers and enablers to renewable technologies within the investment and renewables community. Thematic analysis of 14 in-depth interviews with representatives from renewable energy producers, banks and investment companies identified key factors affecting the psychology of investor behaviour in renewables. Eight key issues are highlighted, including a range of barriers and enablers, the role of the government, balance between cost/risk, value/return on investment, investment time scales, personality/individual differences of investors and the level of innovation in the renewable technology. It was particularly notable that in the findings the role of the government was discussed more than other themes and generally in quite critical terms, highlighting the need to ensure consistency in government funding and policy and a greater understanding of how government decision-making happens. Specific findings such as these illustrate the value of crossing disciplinary boundaries and highlight potential further research. Behavioural science and economic psychology in particular have much to offer at the interface of other disciplines such as political science and financial economics. PMID:24427512

An exploratory investigation of barriers and enablers affecting investment in renewable companies and technologies in the UK.

PubMed

Wells, Victoria; Greenwell, Felicity; Covey, Judith; Rosenthal, Harriet E S; Adcock, Mike; Gregory-Smith, Diana

2013-02-06

The last few years have seen considerable research expenditure on renewable fuel technologies. However, in many cases, the necessary sustained and long-term funding from the investment community has not been realized at a level needed to allow technologies to become reality. According to global consulting firm Deloitte's recent renewable energy report (http://www.deloitte.com/energypredictions2012), many renewable energy projects stalled or were not completed because of issues including the global economy, the state of government finances, difficulties in funding and regulatory uncertainty. This investigation concentrates on the funding aspect and explores the perceived barriers and enablers to renewable technologies within the investment and renewables community. Thematic analysis of 14 in-depth interviews with representatives from renewable energy producers, banks and investment companies identified key factors affecting the psychology of investor behaviour in renewables. Eight key issues are highlighted, including a range of barriers and enablers, the role of the government, balance between cost/risk, value/return on investment, investment time scales, personality/individual differences of investors and the level of innovation in the renewable technology. It was particularly notable that in the findings the role of the government was discussed more than other themes and generally in quite critical terms, highlighting the need to ensure consistency in government funding and policy and a greater understanding of how government decision-making happens. Specific findings such as these illustrate the value of crossing disciplinary boundaries and highlight potential further research. Behavioural science and economic psychology in particular have much to offer at the interface of other disciplines such as political science and financial economics.

Satellite Power Systems /SPS/ - Overview of system studies and critical technology

NASA Technical Reports Server (NTRS)

Manson, S. V.

1980-01-01

Systems studies and critical technology issues for the development and evaluation of Satellite Power Systems (SPS) for the photovoltaic generation of electrical energy and its transmission to earth are reviewed. Initial concept studies completed in 1976 and system definition studies initiated in the same year have indicated the technical feasibility of SPS and identified challenging issues to be addressed as part of the SPS Concept Development and Evaluation Program. Systems considered in the study include photovoltaic and solar thermal power conversion configurations employing klystron or solid state microwave generators or lasers for power transmission, and power transmission options, system constructability and in-orbit and ground operations. Technology investigations are being performed in the areas of microwave power transmission, structure/controls interactions and the behavior of key materials in the space/SPS environment. Favorable results have been obtained in the areas of microwave phase distribution and phase control, dc-RF conversion, antenna radiating element, and no insurmountable problems have been discovered in any of the investigations to date.

Space-based solar power conversion and delivery systems study. Volume 5: Economic analysis

NASA Technical Reports Server (NTRS)

1977-01-01

Space-based solar power conversion and delivery systems are studied along with a variety of economic and programmatic issues relevant to their development and deployment. The costs, uncertainties and risks associated with the current photovoltaic Satellite Solar Power System (SSPS) configuration, and issues affecting the development of an economically viable SSPS development program are addressed. In particular, the desirability of low earth orbit (LEO) and geosynchronous (GEO) test satellites is examined and critical technology areas are identified. The development of SSPS unit production (nth item), and operation and maintenance cost models suitable for incorporation into a risk assessment (Monte Carlo) model (RAM) are reported. The RAM was then used to evaluate the current SSPS configuration expected costs and cost-risk associated with this configuration. By examining differential costs and cost-risk as a function of postulated technology developments, the critical technologies, that is, those which drive costs and/or cost-risk, are identified. It is shown that the key technology area deals with productivity in space, that is, the ability to fabricate and assemble large structures in space, not, as might be expected, with some hardware component technology.

Marketability requirements for fault detection and diagnostics in commercial buildings

DOE Office of Scientific and Technical Information (OSTI.GOV)

Heinemeier, K.H.

Fault Detection and Diagnostics (FDD) is a technology that has a great potential for improving performance and reducing energy consumed in commercial buildings, and is rapidly becoming feasible for the buildings sector. Scientists have developed algorithms for FDD, and are making plans for field-testing and demonstration of these methods in real buildings. These efforts will provide a sound technical basis for FDD product offerings. FDD has the potential to dramatically improve the quality of operation of buildings. However, progress on technical issues is only one step towards implementing FDD in the market. FDD cannot be expected to have a majormore » impact on buildings unless market issues are addressed. Many questions will have to be answered regarding the users of FDD systems, the usability of the product, the market for FDD, and the nature of possible FDD offerings. It is crucial to consider marketing issues in parallel with the more technical issues. Constraints and opportunities that will be faced in marketing the products must be recognized early in technology development, and addressed and integrated into designs to ensure an appropriate system design. This paper identified a number of key questions that will arise in addressing marketability issues. These questions will have to be answered individually by technology developers and entities intending to market FDD. This paper presents some of the considerations that must go into the answering the questions, and provides a framework for analyzing the market requirements.« less

Space-based solar power conversion and delivery systems study. Volume 1: Executive summary

NASA Technical Reports Server (NTRS)

Hazelrigg, G. A., Jr.

1976-01-01

The technical and economic aspects of satellite solar power systems are presented with a focus on the current configuration 5000 MW system. The technical studies include analyses of the orbital system structures, control and stationkeeping, and the formulation of program plans and costs for input to the economic analyses. The economic analyses centered about the development and use of a risk analysis model for a system cost assessment, identification of critical issues and technologies, and to provide information for programmatic decision making. A preliminary economic examination of some utility interface issues is included. Under the present state-of-knowledge, it is possible to formulate a program plan for the development of a satellite solar power system that can be economically justified. The key area of technological uncertainty is man's ability to fabricate and assemble large structures in space.

Innovation: an emerging focus from cells to societies.

PubMed

Hochberg, Michael E; Marquet, Pablo A; Boyd, Robert; Wagner, Andreas

2017-12-05

Innovations are generally unexpected, often spectacular changes in phenotypes and ecological functions. The contributions to this theme issue are the latest conceptual, theoretical and experimental developments, addressing how ecology, environment, ontogeny and evolution are central to understanding the complexity of the processes underlying innovations. Here, we set the stage by introducing and defining key terms relating to innovation and discuss their relevance to biological, cultural and technological change. Discovering how the generation and transmission of novel biological information, environmental interactions and selective evolutionary processes contribute to innovation as an ecosystem will shed light on how the dominant features across life come to be, generalize to social, cultural and technological evolution, and have applications in the health sciences and sustainability.This article is part of the theme issue 'Process and pattern in innovations from cells to societies'. © 2017 The Author(s).

Innovation: an emerging focus from cells to societies

PubMed Central

Boyd, Robert

2017-01-01

Innovations are generally unexpected, often spectacular changes in phenotypes and ecological functions. The contributions to this theme issue are the latest conceptual, theoretical and experimental developments, addressing how ecology, environment, ontogeny and evolution are central to understanding the complexity of the processes underlying innovations. Here, we set the stage by introducing and defining key terms relating to innovation and discuss their relevance to biological, cultural and technological change. Discovering how the generation and transmission of novel biological information, environmental interactions and selective evolutionary processes contribute to innovation as an ecosystem will shed light on how the dominant features across life come to be, generalize to social, cultural and technological evolution, and have applications in the health sciences and sustainability. This article is part of the theme issue ‘Process and pattern in innovations from cells to societies’. PMID:29061887

Medical sociology and technology: critical engagements.

PubMed

Casper, Monica J; Morrison, Daniel R

2010-01-01

In this selective review of the literature on medical sociology's engagement with technology, we outline the concurrent developments of the American Sociological Association section on medicine and advances in medical treatment. We then describe theoretical and epistemological issues with scholars' treatment of technology in medicine. Using symbolic interactionist concepts, as well as work from the interdisciplinary field of science and technology studies, we review and synthesize critical connections in and across sociology's intellectual relationship with medical technology. Next, we discuss key findings in these literatures, noting a shift from a focus on the effects of technology on practice to a reconfiguration of human bodies. We also look toward the future, focusing on connections between technoscientific identities and embodied health movements. Finally, we call for greater engagement by medical sociologists in studying medical technology and the process of policy-making--two areas central to debates in health economics and public policy.

Thermal Control Working Group report

NASA Technical Reports Server (NTRS)

Haslett, Robert; Mahefkey, E. Thomas

1986-01-01

The Thermal Control Working Group limited its evaluation to issues associated with Earth orbiting and planetary spacecraft with power levels up to 50 kW. It was concluded that the space station technology is a necessary precursor but does not meet S/C 2000 needs (life, high heat flux, long term cryogenics, and survivability). Additional basic and applied research are required (fluid/materials compatibility and two phase system modeling). Scaling, the key issue, must define accelerated life test criteria. The two phase systems require 0g to 1 g correlation. Additional ground test beds are required and combined space environment tests of materials.

When children have children: the teen pregnancy predicament.

PubMed

Carter, D M; Felice, M E; Rosoff, J; Zabin, L S; Beilenson, P L; Dannenberg, A L

1994-01-01

Despite developments in contraceptive technology and changes in societal norms, adolescent pregnancy remains a key issue for politicians, social scientists, health care providers, and educators. The adolescent's access to contraception and abortion services continues to spark legal debate. The implications of research call for the development of innovative programs to address larger issues, such as poverty and limited access to health care, in the management and prevention of adolescent pregnancies. Clinical interventions, such as school-linked clinics to provide contraception and prenatal care programs to reduce perinatal morbidity, have varied in their approaches and their subsequent success.

Modelling of additive manufacturing processes: a review and classification

NASA Astrophysics Data System (ADS)

Stavropoulos, Panagiotis; Foteinopoulos, Panagis

2018-03-01

Additive manufacturing (AM) is a very promising technology; however, there are a number of open issues related to the different AM processes. The literature on modelling the existing AM processes is reviewed and classified. A categorization of the different AM processes in process groups, according to the process mechanism, has been conducted and the most important issues are stated. Suggestions are made as to which approach is more appropriate according to the key performance indicator desired to be modelled and a discussion is included as to the way that future modelling work can better contribute to improving today's AM process understanding.

Enhancing LoRaWAN Security through a Lightweight and Authenticated Key Management Approach.

PubMed

Sanchez-Iborra, Ramon; Sánchez-Gómez, Jesús; Pérez, Salvador; Fernández, Pedro J; Santa, José; Hernández-Ramos, José L; Skarmeta, Antonio F

2018-06-05

Luckily, new communication technologies and protocols are nowadays designed considering security issues. A clear example of this can be found in the Internet of Things (IoT) field, a quite recent area where communication technologies such as ZigBee or IPv6 over Low power Wireless Personal Area Networks (6LoWPAN) already include security features to guarantee authentication, confidentiality and integrity. More recent technologies are Low-Power Wide-Area Networks (LP-WAN), which also consider security, but present initial approaches that can be further improved. An example of this can be found in Long Range (LoRa) and its layer-two supporter LoRa Wide Area Network (LoRaWAN), which include a security scheme based on pre-shared cryptographic material lacking flexibility when a key update is necessary. Because of this, in this work, we evaluate the security vulnerabilities of LoRaWAN in the area of key management and propose different alternative schemes. Concretely, the application of an approach based on the recently specified Ephemeral Diffie⁻Hellman Over COSE (EDHOC) is found as a convenient solution, given its flexibility in the update of session keys, its low computational cost and the limited message exchanges needed. A comparative conceptual analysis considering the overhead of different security schemes for LoRaWAN is carried out in order to evaluate their benefits in the challenging area of LP-WAN.

An Overview of Power Capability Requirements for Exploration Missions

NASA Technical Reports Server (NTRS)

Davis, Jose M.; Cataldo, Robert L.; Soeder, James F.; Manzo, Michelle A.; Hakimzadeh, Roshanak

2005-01-01

Advanced power is one of the key capabilities that will be needed to achieve NASA's missions of exploration and scientific advancement. Significant gaps exist in advanced power capabilities that are on the critical path to enabling human exploration beyond Earth orbit and advanced robotic exploration of the solar system. Focused studies and investment are needed to answer key development issues for all candidate technologies before down-selection. The viability of candidate power technology alternatives will be a major factor in determining what exploration mission architectures are possible. Achieving the capabilities needed to enable the CEV, Moon, and Mars missions is dependent on adequate funding. Focused investment in advanced power technologies for human and robotic exploration missions is imperative now to reduce risk and to make informed decisions on potential exploration mission decisions beginning in 2008. This investment would begin the long lead-time needed to develop capabilities for human exploration missions in the 2015 to 2030 timeframe. This paper identifies some of the key technologies that will be needed to fill these power capability gaps. Recommendations are offered to address capability gaps in advanced power for Crew Exploration Vehicle (CEV) power, surface nuclear power systems, surface mobile power systems, high efficiency power systems, and space transportation power systems. These capabilities fill gaps that are on the critical path to enabling robotic and human exploration missions. The recommendations address the following critical technology areas: Energy Conversion, Energy Storage, and Power Management and Distribution.

Deployment Effects of Marine Renewable Energy Technologies: Wave Energy Scenarios

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mirko Previsic

2010-06-17

Given proper care in siting, design, deployment, operation and maintenance, wave energy conversion could become one of the more environmentally benign sources of electricity generation. In order to accelerate the adoption of these emerging hydrokinetic and marine energy technologies, navigational and environmental concerns must be identified and addressed. All developing hydrokinetic projects involve a wide variety of stakeholders. One of the key issues that site developers face as they engage with this range of stakeholders is that, due to a lack of technical certainty, many of the possible conflicts (e.g., shipping and fishing) and environmental issues are not well-understood,. Inmore » September 2008, re vision consulting, LLC was selected by the Department of Energy (DoE) to apply a scenario-based assessment to the emerging hydrokinetic technology sector in order to evaluate the potential impact of these technologies on the marine environment and navigation constraints. The project’s scope of work includes the establishment of baseline scenarios for wave and tidal power conversion at potential future deployment sites. The scenarios capture variations in technical approaches and deployment scales to properly identify and characterize environmental effects and navigational effects. The goal of the project is to provide all stakeholders with an improved understanding of the potential range of technical attributes and potential effects of these emerging technologies and focus all stakeholders on the critical issues that need to be addressed. By identifying and addressing navigational and environmental concerns in the early stages of the industry’s development, serious mistakes that could potentially derail industry-wide development can be avoided. This groundwork will also help in streamlining siting and associated permitting processes, which are considered key hurdles for the industry’s development in the U.S. today. Re vision is coordinating its efforts with two other project teams funded by DoE which are focused on regulatory issues (Pacific Energy Ventures) and navigational issues (PCCI). The results of this study are structured into three reports: (1) Wave power scenario description (2) Tidal power scenario description (3) Framework for Identifying Key Environmental Concerns This is the first report in the sequence and describes the results of conceptual feasibility studies of wave power plants deployed in Humboldt County, California and Oahu, Hawaii. These two sites contain many of the same competing stakeholder interactions identified at other wave power sites in the U.S. and serve as representative case studies. Wave power remains at an early stage of development. As such, a wide range of different technologies are being pursued by different manufacturers. In order to properly characterize potential effects, it is useful to characterize the range of technologies that could be deployed at the site of interest. An industry survey informed the process of selecting representative wave power devices. The selection criteria requires that devices are at an advanced stage of development to reduce technical uncertainties, and that enough data are available from the manufacturers to inform the conceptual design process of this study. Further, an attempt is made to cover the range of different technologies under development to capture variations in potential environmental effects. Table 1 summarizes the selected wave power technologies. A number of other developers are also at an advanced stage of development, but are not directly mentioned here. Many environmental effects will largely scale with the size of the wave power plant. In many cases, the effects of a single device may not be measurable, while larger scale device arrays may have cumulative impacts that differ significantly from smaller scale deployments. In order to characterize these effects, scenarios are established at three deployment scales which nominally represent (1) a small pilot deployment, (2) a small commercial deployment, and (3) a large commercial scale plant. It is important to understand that the purpose of this study was to establish baseline scenarios based on basic device data that was provided to use by the manufacturer for illustrative purposes only.« less

Biomedical informatics and the convergence of Nano-Bio-Info-Cogno (NBIC) technologies.

PubMed

Martin-Sanchez, F; Maojo, V

2009-01-01

To analyze the role that biomedical informatics could play in the application of the NBIC Converging Technologies in the medical field and raise awareness of these new areas throughout the Biomedical Informatics community. Review of the literature and analysis of the reference documents in this domain from the biomedical informatics perspective. Detailing existing developments showing that partial convergence of technologies have already yielded relevant results in biomedicine (such as bioinformatics or biochips). Input from current projects in which the authors are involved is also used. Information processing is a key issue in enabling the convergence of NBIC technologies. Researchers in biomedical informatics are in a privileged position to participate and actively develop this new scientific direction. The experience of biomedical informaticians in five decades of research in the medical area and their involvement in the completion of the Human and other genome projects will help them participate in a similar role for the development of applications of converging technologies -particularly in nanomedicine. The proposed convergence will bring bridges between traditional disciplines. Particular attention should be placed on the ethical, legal, and social issues raised by the NBIC convergence. These technologies provide new directions for research and education in Biomedical Informatics placing a greater emphasis in multidisciplinary approaches.

Progress Toward National Aeronautics Goals

NASA Technical Reports Server (NTRS)

Russo, Carlo J.; Sehra, Arun K.

1999-01-01

NASA has made definitive progress towards achieving several bold U.S. goals in aeronautics related to air breathing engines. The advanced technologies developed towards these goals span applications from general aviation to large subsonic and supersonic aircraft. The proof of successful technology development is demonstrated through successful technology transfer to U.S. industry and projected fleet impact. Specific examples of progress are discussed that quantifies the achievement towards these goals. In addition, a more detailed vision for NASA aeronautics is defined and key strategic issues are explored which invite international and national debate and involvement especially in reduced environmental impact for subsonic and supersonic aircraft, dramatic new capabilities in general aviation engines, and reduced development cycle time and costs.

Reusable Cryogenic Tank VHM Using Fiber Optic Distributed Sensing Technology

NASA Technical Reports Server (NTRS)

Bodan-Sanders, Patricia; Bouvier, Carl

1998-01-01

The reusable oxygen and hydrogen tanks are key systems for both the X-33 (sub-scale, sub-orbital technology demonstrator) and the commercial Reusable Launch Vehicle (RLV). The backbone of the X-33 Reusable Cryogenic Tank Vehicle Health Management (VHM) system lies in the optical network of distributed strain temperature and hydrogen sensors. This network of fiber sensors will create a global strain and temperature map for monitoring the health of the tank structure, cryogenic insulation, and Thermal Protection System. Lockheed Martin (Sanders and LMMSS) and NASA Langley have developed this sensor technology for the X-33 and have addressed several technical issues such as fiber bonding and laser performance in this harsh environment.

Production and energetic use of biogas from energy crops and wastes in Germany.

PubMed

Weiland, Peter

2003-01-01

The production of biogas for reducing fossil CO2 emissions is one of the key strategic issues of the German government and has resulted in the development of new process techniques and new technologies for the energetic use of biogas. Progress has been made in cultivating energy crops for biogas production, in using new reactor systems for anaerobic digestion, and in applying more efficient technologies for combined heat and power production. Recently, integration of fuel cells within the anaerobic digestion process was started, and new technologies for biogas upgrading and conversion to hydrogen were tested. This article describes the trends in Germany for achieving more efficient energy production.

Wind shear detection. Forward-looking sensor technology

NASA Technical Reports Server (NTRS)

Bracalente, E. M. (Compiler); Delnore, V. E. (Compiler)

1987-01-01

A meeting took place at NASA Langley Research Center in February 1987 to discuss the development and eventual use of forward-looking remote sensors for the detection and avoidance of wind shear by aircraft. The participants represented industry, academia, and government. The meeting was structured to provide first a review of the current FAA and NASA wind shear programs, then to define what really happens to the airplane, and finally to give technology updates on the various types of forward-looking sensors. This document is intended to informally record the essence of the technology updates (represented here through unedited duplication of the vugraphs used), and the floor discussion following each presentation. Also given are key issues remaining unresolved.

The nitrogen-vacancy colour centre in diamond

NASA Astrophysics Data System (ADS)

Doherty, Marcus W.; Manson, Neil B.; Delaney, Paul; Jelezko, Fedor; Wrachtrup, Jörg; Hollenberg, Lloyd C. L.

2013-07-01

The nitrogen-vacancy (NV) colour centre in diamond is an important physical system for emergent quantum technologies, including quantum metrology, information processing and communications, as well as for various nanotechnologies, such as biological and sub-diffraction limit imaging, and for tests of entanglement in quantum mechanics. Given this array of existing and potential applications and the almost 50 years of NV research, one would expect that the physics of the centre is well understood, however, the study of the NV centre has proved challenging, with many early assertions now believed false and many remaining issues yet to be resolved. This review represents the first time that the key empirical and ab initio results have been extracted from the extensive NV literature and assembled into one consistent picture of the current understanding of the centre. As a result, the key unresolved issues concerning the NV centre are identified and the possible avenues for their resolution are examined.

Engineering model system study for a regenerative fuel cell: Study report

NASA Technical Reports Server (NTRS)

Chang, B. J.; Schubert, F. H.; Kovach, A. J.; Wynveen, R. A.

1984-01-01

Key design issues of the regenerative fuel cell system concept were studied and a design definition of an alkaline electrolyte based engineering model system or low Earth orbit missions was completed. Definition of key design issues for a regenerative fuel cell system include gaseous reactant storage, shared heat exchangers and high pressure pumps. A power flow diagram for the 75 kW initial space station and the impact of different regenerative fuel cell modular sizes on the total 5 year to orbit weight and volume are determined. System characteristics, an isometric drawing, component sizes and mass and energy balances are determined for the 10 kW engineering model system. An open loop regenerative fuel cell concept is considered for integration of the energy storage system with the life support system of the space station. Technical problems and their solutions, pacing technologies and required developments and demonstrations for the regenerative fuel cell system are defined.

System Study: Technology Assessment and Prioritizing

NASA Technical Reports Server (NTRS)

2005-01-01

The objective of this NASA funded project is to assess and prioritize advanced technologies required to achieve the goals for an "Intelligent Propulsion System" through collaboration among GEAE, NASA, and Georgia Tech. Key GEAE deliverables are parametric response surface equations (RSE's) relating technology features to system benefits (sfc, weight, fuel burn, design range, acoustics, emission, etc...) and listings of Technology Impact Matrix (TIM) with benefits, debits, and approximate readiness status. TIM has been completed for GEAE and NASA proposed technologies. The combined GEAE and NASA TIM input requirement is shown in Table.1. In the course of building the RSE's and TIM, significant parametric technology modeling and RSE accuracy improvements were accomplished. GEAE has also done preliminary ranking of the technologies using Georgia Tech/GEAE USA developed technology evaluation tools. System level impact was performed by combining beneficial technologies with minimum conflict among various system figures of merits to assess their overall benefits to the system. The shortfalls and issues with modeling the proposed technologies are identified, and recommendations for future work are also proposed.

Telemental Health for Children and Adolescents: An Overview of Legal, Regulatory, and Risk Management Issues.

PubMed

Kramer, Gregory M; Luxton, David D

2016-04-01

The use of technology to provide telemental healthcare continues to increase; however, little has been written about the legal and regulatory issues involved in providing this form of care to children and adolescents. This article reviews existing laws and regulations to summarize the risk management issues relevant to providing telemental healthcare to children and adolescents. There are several legal and regulatory areas in which telemental health clinicians need to have awareness. These areas include: 1) Licensure, 2) malpractice liability, 3) credentialing and privileging, 4) informed consent, 5) security and privacy, and 6) emergency management. Although legal and regulatory challenges remain in providing telemental healthcare to children and adolescents, it is possible to overcome these challenges with knowledge of the issues and appropriate risk management strategies. We provide general knowledge of these key legal and regulatory issues, along with some risk management recommendations.

Research on application of carbon fiber heating material in clothing

NASA Astrophysics Data System (ADS)

Yang, Huanhong

2017-08-01

With the development of society, the way of keeping warm clothing is also developing. Carbon fiber has the advantages of high efficiency, safety, mobility and comfort. As a heating element, it has good application prospect. In this paper, the main technology, application issues and design method of carbon fiber heating garment are analyzed, and the key problems in industrialization are also put forward.

Bottom up and Top Down: Making IT a Key Part of the Campus Sustainability Effort

ERIC Educational Resources Information Center

Cromwell, Dennis; Hanks, Kristin; Engel, Sarah

2009-01-01

Information technology (IT) is regarded globally as a voracious consumer of energy. According to a 2007 research paper issued by the United Kingdom's Global Action Plan, IT accounts for 10 percent of the electrical usage in the U.K. In the United States, Stanford University estimates that IT accounts for 15 percent of its overall electrical use.…

Who Studies STEM Subjects at a Level and Degree in England? An Investigation into the Intersections between Students' Family Background, Gender and Ethnicity in Determining Choice

ERIC Educational Resources Information Center

Codiroli Mcmaster, Natasha

2017-01-01

The relative lack of students studying post-compulsory STEM (Science, Technology, Engineering and Mathematics) subjects is a key policy concern. A particular issue is the disparities in uptake by students' family background, gender and ethnicity. It remains unclear whether the relationship between student characteristics and choice can be…

Web-Based Instruction Systems: Correlation of First Year Online Student Acceptance and Use Variables Related to Intent to Use

ERIC Educational Resources Information Center

Butler, William T.

2014-01-01

The online education population is growing among all age groups but the connection that allows students to interface to the online classroom has been ignored as an issue for research. Web-based instructional systems are the key technology that enables students to enter the virtual classroom of the internet. The study of student perceptions of the…

E3: Organizing for Environment, Energy, and the Economy in the Executive Branch of the U.S. Government.

ERIC Educational Resources Information Center

Carnegie Commission on Science, Technology, and Government, New York, NY.

A Task Force created in 1989 was asked to provide the Carnegie Commission on Science, Technology, and Government with a brief statement outlining both functional needs in environment and energy and institutional forms to enhance the government's capability to address the emergent issues. One key need the Task Force has identified is for a greater…

Vocational Education & Training: Key Considerations when Designing Vocational Models and Curriculums Intended for Under-Educated and Socially Deprived Youths and Adults in Developing Countries

ERIC Educational Resources Information Center

Cully, John H.

2008-01-01

In the past decades there has been a significant transformation in global fiscal trends from a traditional resource based to a fast moving knowledge and technologically centered market. While this readjustment has triggered a significant number of advantages, issues and consequences upon industrialized countries, it has created even more concerns…

Mission Completed? Changing Visibility of Women's Colleges in England and Japan and Their Roles in Promoting Gender Equality in Science

ERIC Educational Resources Information Center

Kodate, Naonori; Kodate, Kashiko; Kodate, Takako

2010-01-01

The global community, from UNESCO to NGOs, is committed to promoting the status of women in science, engineering and technology, despite long-held prejudices and the lack of role models. Previously, when equality was not firmly established as a key issue on international or national agendas, women's colleges played a great role in mentoring female…

Laser diode technology for coherent communications

NASA Technical Reports Server (NTRS)

Channin, D. J.; Palfrey, S. L.; Toda, M.

1989-01-01

The effect of diode laser characteristics on the overall performance capabilities of coherent communication systems is discussed. In particular, attention is given to optical performance issues for diode lasers in coherent systems, measurements of key performance parameters, and optical requirements for coherent single-channel and multichannel communication systems. The discussion also covers limitations imposed by diode laser optical performance on multichannel system capabilities and implications for future developments.

Overview of RFID technology and its applications in the food industry.

PubMed

Kumar, P; Reinitz, H W; Simunovic, J; Sandeep, K P; Franzon, P D

2009-10-01

Radio frequency identification (RFID) is an alternative technology with a potential to replace traditional universal product code (UPC) barcodes. RFID enables identification of an object from a distance without requiring a line of sight. RFID tags can also incorporate additional data such as details of product and manufacturer and can transmit measured environmental factors such as temperature and relative humidity. This article presents key concepts and terminology related to RFID technology and its applications in the food industry. Components and working principles of an RFID system are described. Numerous applications of RFID technology in the food industry (supply chain management, temperature monitoring of foods, and ensuring food safety) are discussed. Challenges in implementation of RFID technology are also discussed in terms of read range, read accuracy, nonuniform standards, cost, recycling issues, privacy, and security concerns.

Bioanalysis in microfluidic devices.

PubMed

Khandurina, Julia; Guttman, András

2002-01-18

Microfabricated bioanalytical devices (also referred to as laboratory-on-a-chip or micro-TAS) offer highly efficient platforms for simultaneous analysis of a large number of biologically important molecules, possessing great potential for genome, proteome and metabolome studies. Development and implementation of microfluidic-based bioanalytical tools involves both established and evolving technologies, including microlithography, micromachining, micro-electromechanical systems technology and nanotechnology. This article provides an overview of the latest developments in the key device subject areas and the basic interdisciplinary technologies. Important aspects of DNA and protein analysis, interfacing issues and system integration are all thoroughly discussed, along with applications for this novel "synergized" technology in high-throughput separations of biologically important molecules. This review also gives a better understanding of how to utilize these technologies as well as to provide appropriate technical solutions to problems perceived as being more fundamental.

Proceedings of the 1991 Oil Heat Technology Conference and Workshop

DOE Office of Scientific and Technical Information (OSTI.GOV)

McDonald, R.J.

This Conference, which was the sixth held since 1984, is a key technology-transfer activity supported by the ongoing Combustion Equipment Technology program at BNL, and is aimed at providing a forum for the exchange of information among international researchers, engineers, manufacturers, and marketers of oil-fired space-conditioning equipment. The objectives of the Conference were to: Identify and evaluate the state-of-the-art and recommend; new initiatives to satisfy consumer needs cost-effectively, reliably, and safely; Foster cooperation among federal and industrial representatives with the common goal of national security via energy conservation. The 1991 Oil Technology Conference comprised: (a) two plenary sessions devoted tomore » presentations and summations by public and private sector representatives from the United States, Europe, and Canada; and, (b) four workshops which focused on mainstream issues in oil-heating technology. Selected papers have been processed separately for inclusion in the Energy Science and Technology Database.« less

A range/depth modulation transfer function (RMTF) framework for characterizing 3D imaging LADAR performance

NASA Astrophysics Data System (ADS)

Staple, Bevan; Earhart, R. P.; Slaymaker, Philip A.; Drouillard, Thomas F., II; Mahony, Thomas

2005-05-01

3D imaging LADARs have emerged as the key technology for producing high-resolution imagery of targets in 3-dimensions (X and Y spatial, and Z in the range/depth dimension). Ball Aerospace & Technologies Corp. continues to make significant investments in this technology to enable critical NASA, Department of Defense, and national security missions. As a consequence of rapid technology developments, two issues have emerged that need resolution. First, the terminology used to rate LADAR performance (e.g., range resolution) is inconsistently defined, is improperly used, and thus has become misleading. Second, the terminology does not include a metric of the system"s ability to resolve the 3D depth features of targets. These two issues create confusion when translating customer requirements into hardware. This paper presents a candidate framework for addressing these issues. To address the consistency issue, the framework utilizes only those terminologies proposed and tested by leading LADAR research and standards institutions. We also provide suggestions for strengthening these definitions by linking them to the well-known Rayleigh criterion extended into the range dimension. To address the inadequate 3D image quality metrics, the framework introduces the concept of a Range/Depth Modulation Transfer Function (RMTF). The RMTF measures the impact of the spatial frequencies of a 3D target on its measured modulation in range/depth. It is determined using a new, Range-Based, Slanted Knife-Edge test. We present simulated results for two LADAR pulse detection techniques and compare them to a baseline centroid technique. Consistency in terminology plus a 3D image quality metric enable improved system standardization.

Workshop 8 (synthesis): challenges of expanding ecological sanitation into urban areas.

PubMed

Milburn, A; Matsui, S; Malmqvist, P A

2002-01-01

After seven papers discussing specific examples of ecological sanitation projects, the workshop considered the background, motivation and feasibility of this technology. It was agreed that ecological sanitation could help tackle water scarcity, health protection and, by recycling water and nutrients into agriculture, food scarcity. Dense cities are probably unsuitable for its implementation, but rural, town and peri-urban areas are promising. Key issues that remains are: the microbiological and chemical risks associated with the technology; the need for major information, education and support programmes; effective linking to reuse schemes; tailoring systems to meet local physical, socio-economic and cultural circumstances.

Precision medicine in the age of big data: The present and future role of large-scale unbiased sequencing in drug discovery and development.

PubMed

Vicini, P; Fields, O; Lai, E; Litwack, E D; Martin, A-M; Morgan, T M; Pacanowski, M A; Papaluca, M; Perez, O D; Ringel, M S; Robson, M; Sakul, H; Vockley, J; Zaks, T; Dolsten, M; Søgaard, M

2016-02-01

High throughput molecular and functional profiling of patients is a key driver of precision medicine. DNA and RNA characterization has been enabled at unprecedented cost and scale through rapid, disruptive progress in sequencing technology, but challenges persist in data management and interpretation. We analyze the state-of-the-art of large-scale unbiased sequencing in drug discovery and development, including technology, application, ethical, regulatory, policy and commercial considerations, and discuss issues of LUS implementation in clinical and regulatory practice. © 2015 American Society for Clinical Pharmacology and Therapeutics.

Radiation Effects on Emerging Technologies: Implications of Space Weather Risk Management

NASA Technical Reports Server (NTRS)

LaBel, Kenneth A.; Barth, Janet L.

2000-01-01

As NASA and its space partners endeavor to develop a network of satellites capable of supporting humankind's needs for advanced space weather prediction and understanding, one of the key challenges is to design a space system to operate in the natural space radiation environment In this paper, we present a description of the natural space radiation environment, the effects of interest to electronic or photonic systems, and a sample of emerging technologies and their specific issues. We conclude with a discussion of operations in the space radiation hazard and considerations for risk management.

Advanced Reactor Technologies - Regulatory Technology Development Plan (RTDP)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Moe, Wayne L.

This DOE-NE Advanced Small Modular Reactor (AdvSMR) regulatory technology development plan (RTDP) will link critical DOE nuclear reactor technology development programs to important regulatory and policy-related issues likely to impact a “critical path” for establishing a viable commercial AdvSMR presence in the domestic energy market. Accordingly, the regulatory considerations that are set forth in the AdvSMR RTDP will not be limited to any one particular type or subset of advanced reactor technology(s) but rather broadly consider potential regulatory approaches and the licensing implications that accompany all DOE-sponsored research and technology development activity that deal with commercial non-light water reactors. However,more » it is also important to remember that certain “minimum” levels of design and safety approach knowledge concerning these technology(s) must be defined and available to an extent that supports appropriate pre-licensing regulatory analysis within the RTDP. Final resolution to advanced reactor licensing issues is most often predicated on the detailed design information and specific safety approach as documented in a facility license application and submitted for licensing review. Because the AdvSMR RTDP is focused on identifying and assessing the potential regulatory implications of DOE-sponsored reactor technology research very early in the pre-license application development phase, the information necessary to support a comprehensive regulatory analysis of a new reactor technology, and the resolution of resulting issues, will generally not be available. As such, the regulatory considerations documented in the RTDP should be considered an initial “first step” in the licensing process which will continue until a license is issued to build and operate the said nuclear facility. Because a facility license application relies heavily on the data and information generated by technology development studies, the anticipated regulatory importance of key DOE reactor research initiatives should be assessed early in the technology development process. Quality assurance requirements supportive of later licensing activities must also be attached to important research activities to ensure resulting data is usable in that context. Early regulatory analysis and licensing approach planning thus provides a significant benefit to the formulation of research plans and also enables the planning and development of a compatible AdvSMR licensing framework, should significant modification be required.« less

Advanced Reactor Technology -- Regulatory Technology Development Plan (RTDP)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Moe, Wayne Leland

This DOE-NE Advanced Small Modular Reactor (AdvSMR) regulatory technology development plan (RTDP) will link critical DOE nuclear reactor technology development programs to important regulatory and policy-related issues likely to impact a “critical path” for establishing a viable commercial AdvSMR presence in the domestic energy market. Accordingly, the regulatory considerations that are set forth in the AdvSMR RTDP will not be limited to any one particular type or subset of advanced reactor technology(s) but rather broadly consider potential regulatory approaches and the licensing implications that accompany all DOE-sponsored research and technology development activity that deal with commercial non-light water reactors. However,more » it is also important to remember that certain “minimum” levels of design and safety approach knowledge concerning these technology(s) must be defined and available to an extent that supports appropriate pre-licensing regulatory analysis within the RTDP. Final resolution to advanced reactor licensing issues is most often predicated on the detailed design information and specific safety approach as documented in a facility license application and submitted for licensing review. Because the AdvSMR RTDP is focused on identifying and assessing the potential regulatory implications of DOE-sponsored reactor technology research very early in the pre-license application development phase, the information necessary to support a comprehensive regulatory analysis of a new reactor technology, and the resolution of resulting issues, will generally not be available. As such, the regulatory considerations documented in the RTDP should be considered an initial “first step” in the licensing process which will continue until a license is issued to build and operate the said nuclear facility. Because a facility license application relies heavily on the data and information generated by technology development studies, the anticipated regulatory importance of key DOE reactor research initiatives should be assessed early in the technology development process. Quality assurance requirements supportive of later licensing activities must also be attached to important research activities to ensure resulting data is usable in that context. Early regulatory analysis and licensing approach planning thus provides a significant benefit to the formulation of research plans and also enables the planning and development of a compatible AdvSMR licensing framework, should significant modification be required.« less

Data Access, Interoperability and Sustainability: Key Challenges for the Evolution of Science Capabilities

NASA Astrophysics Data System (ADS)

Walton, A. L.

2015-12-01

In 2016, the National Science Foundation (NSF) will support a portfolio of activities and investments focused upon challenges in data access, interoperability, and sustainability. These topics are fundamental to science questions of increasing complexity that require multidisciplinary approaches and expertise. Progress has become tractable because of (and sometimes complicated by) unprecedented growth in data (both simulations and observations) and rapid advances in technology (such as instrumentation in all aspects of the discovery process, together with ubiquitous cyberinfrastructure to connect, compute, visualize, store, and discover). The goal is an evolution of capabilities for the research community based on these investments, scientific priorities, technology advances, and policies. Examples from multiple NSF directorates, including investments by the Advanced Cyberinfrastructure Division, are aimed at these challenges and can provide the geosciences research community with models and opportunities for participation. Implications for the future are highlighted, along with the importance of continued community engagement on key issues.

Key global environmental impacts of genetically modified (GM) crop use 1996–2012

PubMed Central

Barfoot, Peter; Brookes, Graham

2014-01-01

Against the background of increasing awareness and appreciation of issues such as global warming and the impact of mankind’s activities such as agriculture on the global environment, this paper updates previous assessments of some key environmental impacts that crop biotechnology has had on global agriculture. It focuses on the environmental impacts associated with changes in pesticide use and greenhouse gas emissions arising from the use of GM crops. The adoption of the technology has reduced pesticide spraying by 503 million kg (-8.8%) and, as a result, decreased the environmental impact associated with herbicide and insecticide use on these crops (as measured by the indicator the Environmental Impact Quotient [EIQ]) by 18.7%. The technology has also facilitated a significant reduction in the release of greenhouse gas emissions from this cropping area, which, in 2012, was equivalent to removing 11.88 million cars from the roads. PMID:24637726

Workshop on technology issues of superconducting Maglev transportation systems

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wegrzyn, J.E.; Shaw, D.T.

1991-09-27

There exists a critical need in the United States to improve its ground transportation system. One suggested system that offers many advantages over the current transportation infrastructure is Maglev. Maglev represents the latest evolution in very high and speed ground transportation, where vehicles are magnetically levitated, guided, and propelled over elevated guideways at speeds of 300 miles per hour. Maglev is not a new concept but is, however, receiving renewed interest. The objective of this workshop was to further promote these interest by bringing together a small group of specialists in Maglev technology to discuss Maglev research needs and tomore » identify key research issues to the development of a successful Maglev system. The workshop was organized into four sessions based on the following technical areas: Materials, Testing, and Shielding; Magnet Design and Cryogenic Systems; Propulsion and Levitation Systems; and, System Control and Integration.« less

Research on data collection key technology of smart electric energy meters

NASA Astrophysics Data System (ADS)

Chen, Xiangqun; Huang, Rui; Shen, Liman; Chen, Hao; Xiong, Dezhi; Xiao, Xiangqi; Mouhailiu; Renheng, Xu

2018-02-01

In recent years, smart electric energy meters are demand at 70 million to 90 million with the strong smart grid construction every year in China. However, there are some issues in smart electric energy meters data collection such as the interference of environment, low collection efficiency and inability to work when the power is off. In order to solve these issues above, it uses the RFID communication technology to collect the numbers and electric energy information of smart electric energy meters on the basis of the existing smart electric energy meters, and the related data collection communication experiments were made. The experimental result shows that the electric information and other data batch collection of RFID smart electric energy meters are realized in power and power off. It improves the efficiency and the overall success rate is 99.2% within 2 meters. It provides a new method for smart electric energy meters data collection.

The thermodynamic origin of hysteresis in insertion batteries

NASA Astrophysics Data System (ADS)

Dreyer, Wolfgang; Jamnik, Janko; Guhlke, Clemens; Huth, Robert; Moškon, Jože; Gaberšček, Miran

2010-05-01

Lithium batteries are considered the key storage devices for most emerging green technologies such as wind and solar technologies or hybrid and plug-in electric vehicles. Despite the tremendous recent advances in battery research, surprisingly, several fundamental issues of increasing practical importance have not been adequately tackled. One such issue concerns the energy efficiency. Generally, charging of 1010-1017 electrode particles constituting a modern battery electrode proceeds at (much) higher voltages than discharging. Most importantly, the hysteresis between the charge and discharge voltage seems not to disappear as the charging/discharging current vanishes. Herein we present, for the first time, a general explanation of the occurrence of inherent hysteretic behaviour in insertion storage systems containing multiple particles. In a broader sense, the model also predicts the existence of apparent equilibria in battery electrodes, the sequential particle-by-particle charging/discharging mechanism and the disappearance of two-phase behaviour at special experimental conditions.

The thermodynamic origin of hysteresis in insertion batteries.

PubMed

Dreyer, Wolfgang; Jamnik, Janko; Guhlke, Clemens; Huth, Robert; Moskon, Joze; Gaberscek, Miran

2010-05-01

Lithium batteries are considered the key storage devices for most emerging green technologies such as wind and solar technologies or hybrid and plug-in electric vehicles. Despite the tremendous recent advances in battery research, surprisingly, several fundamental issues of increasing practical importance have not been adequately tackled. One such issue concerns the energy efficiency. Generally, charging of 10(10)-10(17) electrode particles constituting a modern battery electrode proceeds at (much) higher voltages than discharging. Most importantly, the hysteresis between the charge and discharge voltage seems not to disappear as the charging/discharging current vanishes. Herein we present, for the first time, a general explanation of the occurrence of inherent hysteretic behaviour in insertion storage systems containing multiple particles. In a broader sense, the model also predicts the existence of apparent equilibria in battery electrodes, the sequential particle-by-particle charging/discharging mechanism and the disappearance of two-phase behaviour at special experimental conditions.

GAIA - A New Approach To Decision Making on Climate Disruption Issues

NASA Astrophysics Data System (ADS)

Paxton, L. J.; Weiss, M.; Schaefer, R. K.; Swartz, W. H.; Nix, M.; Strong, S. B.; Fountain, G. H.; Babin, S. M.; Pikas, C. K.; Parker, C. L.; Global Assimilation of InformationAction

2011-12-01

GAIA - the Global Assimilation of Information for Action program - provides a broadly extensible framework for enabling the development of a deeper understanding of the issues associated with climate disruption. The key notion of GAIA is that the global climate problem is so complex that a "system engineering" approach is needed in order to make it understandable. The key tenet of system engineering is to focus on requirements and to develop a cost-effective process for satisfying those requirements. To demonstrate this approach we focused first on the impact of climate disruption on public health. GAIA is described in some detail on our website (http://gaia.jhuapl.edu). Climate disruption is not just a scientific problem; one of the key issues that our community has is that of translating scientific results into knowledge that can be used to make informed decisions. In order to support decision makers we have to understand their issues and how to communicate with them. In this talk, we describe how we have built a community of interest that combines subject matter experts from diverse communities (public health, climate change, government, public policy, industry, etc) with policy makers and representatives from industry to develop, on a "level playing field", an understanding of each other's points of view and issues. The first application of this technology was the development of a workshop on Climate, Climate Change and Public Health held April 12-14, 2011. This paper describes our approach to going beyond the workshop environment to continue to engage the decision maker's community in a variety of ways that translate abstract scientific data into actionable information. Key ideas we will discuss include the development of social media, simulations of global/national/local environments affected by climate disruption, and visualizations of the monetary and health impacts of choosing not to address mitigation or adaptation to climate disruption.

Different Perspectives on Technology Acceptance: The Role of Technology Type and Age

NASA Astrophysics Data System (ADS)

Arning, Katrin; Ziefle, Martina

Although eHealth technologies offer an enormous potential to improve healthcare, the knowledge about key determinants of acceptance for eHealth technology is restricted. While the underlying technology of eHealth technologies and Information and Communication technology (ICT) is quite similar, utilization contexts and using motives are quite different. In order to explore the role of technology type on acceptance, we contrasted central application characteristics of both technology types using the scenario technique. A questionnaire was administered (n = 104) measuring individual variables (age, gender) and attitudes regarding an eHealth application (blood sugar meter) in contrast to an ICT device (Personal Digital Assistant, PDA). Older users basically approved the utilization of health-related technologies and perceived lower usability barriers. In addition, we identified main utilization motives of eHealth technology and technology-specific acceptance patterns, especially regarding issues of data safety in the eHealth context. Effects of age and gender in acceptance ratings suggest a differential perspective on eHealth acceptance. Finally, practical interventions were derived in order to support eHealth device design and to promote acceptance of eHealth technology.

The use of virtual communities of practice to improve interprofessional collaboration and education: findings from an integrated review.

PubMed

McLoughlin, Clodagh; Patel, Kunal D; O'Callaghan, Tom; Reeves, Scott

2018-03-01

The recent growth in online technology has led to a rapid increase in the sharing of health related information globally. Health and social care professionals are now using a wide range of virtual communities of practice (VCoPs) for learning, support, continuing professional education, knowledge management and information sharing. In this article, we report the findings from a review of the literature that explored the use of VCoPs by health and social care professionals to determine their potential for interprofessional education and collaboration. We employed integrated review methods to search and identify relevant VCoP articles. We undertook searches of PubMed and Google Scholar from 2000, which after screening, resulted in the inclusion of 19 articles. A thematic analysis generated the following key issues related to the use of VCoPs: 'definitions and approaches', 'technological infrastructure', 'reported benefits', 'participation issues', 'trust and privacy and 'technical ability'. Based on the findings from this review, there is some evidence that VCoPs can offer an informal method of professional and interprofessional development for clinicians, and can decrease social and professional isolation. However, for VCoPs to be successful, issues of privacy, trust, encouragement and technology need to be addressed.

DataHub: Knowledge-based data management for data discovery

NASA Astrophysics Data System (ADS)

Handley, Thomas H.; Li, Y. Philip

1993-08-01

Currently available database technology is largely designed for business data-processing applications, and seems inadequate for scientific applications. The research described in this paper, the DataHub, will address the issues associated with this shortfall in technology utilization and development. The DataHub development is addressing the key issues in scientific data management of scientific database models and resource sharing in a geographically distributed, multi-disciplinary, science research environment. Thus, the DataHub will be a server between the data suppliers and data consumers to facilitate data exchanges, to assist science data analysis, and to provide as systematic approach for science data management. More specifically, the DataHub's objectives are to provide support for (1) exploratory data analysis (i.e., data driven analysis); (2) data transformations; (3) data semantics capture and usage; analysis-related knowledge capture and usage; and (5) data discovery, ingestion, and extraction. Applying technologies that vary from deductive databases, semantic data models, data discovery, knowledge representation and inferencing, exploratory data analysis techniques and modern man-machine interfaces, DataHub will provide a prototype, integrated environement to support research scientists' needs in multiple disciplines (i.e. oceanography, geology, and atmospheric) while addressing the more general science data management issues. Additionally, the DataHub will provide data management services to exploratory data analysis applications such as LinkWinds and NCSA's XIMAGE.

VOLATILE ORGANIC COMPOUNDS (VOC) RECOVERY ...

EPA Pesticide Factsheets

The purpose of the seminar was to bring researchers, technology developers, and industry representatives together to discuss recovery technologies and techniques for VOCs. The seminar focused on the specific VOC recovery needs of industry and on case studies that summarize effective VOC product recovery techniques applicable to air, water, and solid waste. The case studies highlighted examples in which existing and new recovery technologies resulted in significant cost savings to industry. The seminar focused on the following key issues:. Status and future direction of EPA< DOE, and other major research programs.. What are the latest technology innovations in VOC treatment and recovery?. Performance and cost effectiveness of VOC recovery techniques.. How are recovery techniques applied to air, water, and solid waste?Presenters were from industry, academia, EPA, and various consulting firms. The presentations were followed by several facilitated breakout sessions; these sessions allowed participants an opportunity to discuss their needs and opinions on VOC recovery trends, research, and other issues.This document contains summaries of the presentations and discussions during the seminar. It does not constitute an actual proceedings, since the presentations were informal and no written versions were required. The list of participants and contact information are included in Appendix A. Information

Design of a Customized Multipurpose Nano-Enabled Implantable System for In-Vivo Theranostics

PubMed Central

Juanola-Feliu, Esteve; Miribel-Català, Pere Ll.; Páez Avilés, Cristina; Colomer-Farrarons, Jordi; González-Piñero, Manel; Samitier, Josep

2014-01-01

The first part of this paper reviews the current development and key issues on implantable multi-sensor devices for in vivo theranostics. Afterwards, the authors propose an innovative biomedical multisensory system for in vivo biomarker monitoring that could be suitable for customized theranostics applications. At this point, findings suggest that cross-cutting Key Enabling Technologies (KETs) could improve the overall performance of the system given that the convergence of technologies in nanotechnology, biotechnology, micro&nanoelectronics and advanced materials permit the development of new medical devices of small dimensions, using biocompatible materials, and embedding reliable and targeted biosensors, high speed data communication, and even energy autonomy. Therefore, this article deals with new research and market challenges of implantable sensor devices, from the point of view of the pervasive system, and time-to-market. The remote clinical monitoring approach introduced in this paper could be based on an array of biosensors to extract information from the patient. A key contribution of the authors is that the general architecture introduced in this paper would require minor modifications for the final customized bio-implantable medical device. PMID:25325336

Towards a Geocognition of Geothermal Energy: an Evolving Research Partnership in South West England

NASA Astrophysics Data System (ADS)

Gibson, H.; Stewart, I. S.; Ledingham, P.

2017-12-01

The development and deployment of novel geological technologies in industry often raise anxiety in the public sphere. New technologies are intrinsically unfamiliar, not only to the public, but also to other technical specialists in the field. This can focus conflict and uncertainty around issues that may not actually be problematic, or obscure other issues that may actually warrant closer inspection. An example of an emergent geo-technology that has received little attention in the public or general technical spheres is the introduction of Enhanced Geothermal Power in the UK. In early 2018, a project testing the viability of deep geothermal heat and power will begin in Cornwall, England, and is likely to face contested issues of public perception that have confronted other novel geological technologies, such as Carbon Capture and Storage and hydraulic fracturing. To address concerns about how the UK public will conceptualise this new technology, the Cornish deep geothermal project has developed an innovative partnership between the industry partner operating the test drilling site and a geoscience cognition research partner. That research partner integrates geoscience, cognitive psychology and media communication specialists in a three-year project that will track evolving public perceptions of and community attitudes to geothermal energy; from initial community engagements to the drilling operations and, ultimately, to the operation of the facility. Key in this study will be an exploration of how the industrial partnership impacts and affects the research process as the site testing proceeds, but also how the research process can engage with issues of communication between the industrial partner and the public. Overall, the interdisciplinary research aims to better understand how public/industry partnerships develop and evolve over the lifetime of an active geo-energy project and thereby help inform and improve community-centred geo-communication around novel energy technologies in the future.

Development of an innovative sandwich common bulkhead for cryogenic upper stage propellant tank

NASA Astrophysics Data System (ADS)

Szelinski, B.; Lange, H.; Röttger, C.; Sacher, H.; Weiland, S.; Zell, D.

2012-12-01

In the frame of the Future Launcher Preparatory Program (FLPP) investigating advancing technologies for the Next Generation of Launchers (NGL) a number of novel key technologies are presently under development for significantly improving vehicle performance in terms of payload capacity and mission versatility. As a respective ESA guided technology development program, Cryogenic Upper Stage Technologies (CUST) has been launched within FLPP that hosts among others the development of a common bulkhead to separate liquid hydrogen from the liquid oxygen compartment. In this context, MT Aerospace proposed an advanced sandwich design concept which is currently in the development phase reaching for TRL4 under MT Aerospace responsibility. Key components of this sandwich common bulkhead are a specific core material, situated in-between two thin aluminum face sheets, and an innovative thermal decoupling element at the equatorial region. The combination of these elements provides excellent thermal insulation capabilities and mechanical performance at a minimum weight, since mechanical and thermal functions are merged in the same component. This improvement is expressed by substantial performance figures of the proposed concept that include high resistance against reverse pressure, an optimized heat leak and minimized mass, involving the sandwich dome structure and the adjacent interface rings. The development of single sub-technologies, all contributing to maturate the sandwich common bulkhead towards the desired technology readiness level (TRL), is described in the context of the given design constraints as well as technical, functional and programmatic requirements, issued from the stage level. This includes the thermal and mechanical characterization of core materials, manufacturing issues as well as non-destructive testing and the thermal and structural analyses and dimensioning of the complete common bulkhead system. Dedicated TRL assessments in the Ariane 5 Mid-life Evolution (A5-ME) program track the progress of these technology developments and analyze their applicability in time for A5-ME. In order to approximate A5-ME concerned preconditions, activities are initiated aiming at harmonization of the available specifications. Hence, a look-out towards a further technology step approaching TRL6 in a subsequent phase is given, briefly addressing topics of full scale manufacture and appropriate thermo-mechanical testing of an entire sandwich common bulkhead.

Cloud Computing Fundamentals

NASA Astrophysics Data System (ADS)

Furht, Borko

In the introductory chapter we define the concept of cloud computing and cloud services, and we introduce layers and types of cloud computing. We discuss the differences between cloud computing and cloud services. New technologies that enabled cloud computing are presented next. We also discuss cloud computing features, standards, and security issues. We introduce the key cloud computing platforms, their vendors, and their offerings. We discuss cloud computing challenges and the future of cloud computing.

National Center for Food Safety and Technology

DTIC Science & Technology

2013-12-05

on the Determination of Copper, Iron, Manganese and Zinc in Beef and Goat Liver American Chemical Society (ACS) – September, 2013 22. Meng Xu...addresses key food safety issues facing the country and supports the development of safe food with health-promoting properties from farm to fork. This...Reddy, Renate Reimschuessel. 2013. Proficiency Test on the Determination of Copper, Iron, Manganese and Zinc in Beef and Goat Liver American

African Science Leaders Focus on Key Challenges and Opportunities

NASA Astrophysics Data System (ADS)

Showstack, Randy

2014-08-01

While dozens of African presidents were in Washington, D. C., in early August to meet with U.S. president Barack Obama during the first U.S.-Africa Leaders Summit, African science ministers and science academy officials held their own gathering at the U.S. National Academy of Sciences (NAS) to focus on challenges and opportunities related to environmental protection, climate change, development, health, poverty, technology, and other issues.

Numerical aerodynamic simulation facility preliminary study, volume 2 and appendices

NASA Technical Reports Server (NTRS)

1977-01-01

Data to support results obtained in technology assessment studies are presented. Objectives, starting points, and future study tasks are outlined. Key design issues discussed in appendices include: data allocation, transposition network design, fault tolerance and trustworthiness, logic design, processing element of existing components, number of processors, the host system, alternate data base memory designs, number representation, fast div 521 instruction, architectures, and lockstep array versus synchronizable array machine comparison.

DOE/NASA Automotive Stirling Engine Project overview '83

NASA Technical Reports Server (NTRS)

Beremand, D. G.

1982-01-01

An overview of the DOE/NASA Automotive Stirling Engine Project is presented. The background and objectives of the project are reviewed. Project activities are described and technical progress and status are presented and assessed. Prospects for achieving the objective 30% fuel economy improvement are considered good. The key remaining technology issues are primarily related to life, reliability and cost, such as piston rod seals, and low cost heat exchanges.

Children's Use of Electronic Technologies in the Home (Based on Discussions with 190 K-6 Children in Three Sydney Metropolitan Schools). October 1995.

ERIC Educational Resources Information Center

Downes, Toni; Reddacliff, Cathy; Moont, Sue

This study examined how children, drawn from K-6 grades in 3 primary schools in southwest Sydney, use computers in their homes and the physical and social environments within which they use them. Key issues explored were diversity of access, range of uses, and factors which influence use, including gender, age, and parental and sibling role…

Accelerated Insertion of Materials - Composites (AIM-C) Methodology

DTIC Science & Technology

2004-05-12

the groups even after this point in the maturation process, but the key is that the applications team must know what the technology development team...Threats ( SWOT ) analysis? Was a check made of past showstoppers/major issues related to problem statements of a similar nature? (This will be...in this methodology and in the AIM-C system is helpful to performing strength, weakness, opportunities, and threats ( SWOT ) analyses on the materials

Schools Serving as Centres for Dissemination of Alternative Energy Know-How and Technologies: Evidence from Southern Ethiopia

ERIC Educational Resources Information Center

Dalelo, Aklilu

2008-01-01

The school curricula are widely believed to be the best vehicle for generating public awareness of and action related to areas of energy concern. In an attempt to build the capacity of schools to address key environmental issues in Ethiopia, a pilot project had been designed in 2004. The principal aim of the project was to bring about positive…

Research on computer-aided design of modern marine power systems

NASA Astrophysics Data System (ADS)

Ding, Dongdong; Zeng, Fanming; Chen, Guojun

2004-03-01

To make the MPS (Marine Power System) design process more economical and easier, a new CAD scheme is brought forward which takes much advantage of VR (Virtual Reality) and AI (Artificial Intelligence) technologies. This CAD system can shorten the period of design and reduce the requirements on designers' experience in large scale. And some key issues like the selection of hardware and software of such a system are discussed.

Editorial: emerging issues in sociotechnical systems thinking and workplace safety.

PubMed

Noy, Y Ian; Hettinger, Lawrence J; Dainoff, Marvin J; Carayon, Pascale; Leveson, Nancy G; Robertson, Michelle M; Courtney, Theodore K

2015-01-01

The burden of on-the-job accidents and fatalities and the harm of associated human suffering continue to present an important challenge for safety researchers and practitioners. While significant improvements have been achieved in recent decades, the workplace accident rate remains unacceptably high. This has spurred interest in the development of novel research approaches, with particular interest in the systemic influences of social/organisational and technological factors. In response, the Hopkinton Conference on Sociotechnical Systems and Safety was organised to assess the current state of knowledge in the area and to identify research priorities. Over the course of several months prior to the conference, leading international experts drafted collaborative, state-of-the-art reviews covering various aspects of sociotechnical systems and safety. These papers, presented in this special issue, cover topics ranging from the identification of key concepts and definitions to sociotechnical characteristics of safe and unsafe organisations. This paper provides an overview of the conference and introduces key themes and topics. Sociotechnical approaches to workplace safety are intended to draw practitioners' attention to the critical influence that systemic social/organisational and technological factors exert on safety-relevant outcomes. This paper introduces major themes addressed in the Hopkinton Conference within the context of current workplace safety research and practice challenges.

Editorial: emerging issues in sociotechnical systems thinking and workplace safety

PubMed Central

Noy, Y. Ian; Hettinger, Lawrence J.; Dainoff, Marvin J.; Carayon, Pascale; Leveson, Nancy G.; Robertson, Michelle M.; Courtney, Theodore K.

2015-01-01

The burden of on-the-job accidents and fatalities and the harm of associated human suffering continue to present an important challenge for safety researchers and practitioners. While significant improvements have been achieved in recent decades, the workplace accident rate remains unacceptably high. This has spurred interest in the development of novel research approaches, with particular interest in the systemic influences of social/organisational and technological factors. In response, the Hopkinton Conference on Sociotechnical Systems and Safety was organised to assess the current state of knowledge in the area and to identify research priorities. Over the course of several months prior to the conference, leading international experts drafted collaborative, state-of-the-art reviews covering various aspects of sociotechnical systems and safety. These papers, presented in this special issue, cover topics ranging from the identification of key concepts and definitions to sociotechnical characteristics of safe and unsafe organisations. This paper provides an overview of the conference and introduces key themes and topics. Practitioner Summary: Sociotechnical approaches to workplace safety are intended to draw practitioners' attention to the critical influence that systemic social/organisational and technological factors exert on safety-relevant outcomes. This paper introduces major themes addressed in the Hopkinton Conference within the context of current workplace safety research and practice challenges. PMID:25819595

Clinical Implementation of Pharmacogenomics for Personalized Precision Medicine: Barriers and Solutions.

PubMed

Klein, Michelle E; Parvez, Md Masud; Shin, Jae-Gook

2017-09-01

Clinical implementation of pharmacogenomics (PGx) leads to personalized medicine, which improves the efficacy, safety, and cost-effectiveness of treatments. Although PGx-based research has been conducted for more than a decade, several barriers have slowed down its widespread implementation in clinical practice. Globally, there is an imbalance in programs and solutions required to empower the clinical implementation of PGx between countries. Therefore, we aimed to review these issues comprehensively, determine the major barriers, and find the best solutions. Through an extensive review of ongoing clinical implementation programs, scientific, educational, ethical, legal, and social issues, information technology, and reimbursement were identified as the key barriers. The pace of global implementation of genomic medicine coincided with the resource limitations of each country. The key solutions identified for the earlier mentioned barriers are as follows: building of secure and suitable information technology infrastructure with integrated clinical decision support systems along with increasing PGx evidence, more regulations, reimbursement strategies for stakeholder's acceptance, incorporation of PGx education in all institutions and clinics, and PGx promotion to all health care professionals and patients. In conclusion, this review will be helpful for the better understanding of common barriers and solutions pertaining to the clinical application of PGx. Copyright © 2017 American Pharmacists Association®. Published by Elsevier Inc. All rights reserved.

Setting research priorities across science, technology, and health sectors: the Tanzania experience.

PubMed

de Haan, Sylvia; Kingamkono, Rose; Tindamanyire, Neema; Mshinda, Hassan; Makandi, Harun; Tibazarwa, Flora; Kubata, Bruno; Montorzi, Gabriela

2015-03-12

Identifying research priorities is key to innovation and economic growth, since it informs decision makers on effectively targeting issues that have the greatest potential public benefit. As such, the process of setting research priorities is of pivotal importance for favouring the science, technology, and innovation (STI)-driven development of low- and middle-income countries. We report herein on a major cross-sectoral nationwide research priority setting effort recently carried out in Tanzania by the Tanzania Commission for Science and Technology (COSTECH) in partnership with the Council on Health Research for Development (COHRED) and the NEPAD Agency. The first of its type in the country, the process brought together stakeholders from 42 sub-sectors in science, technology, and health. The cross-sectoral research priority setting process consisted of a 'training-of-trainers' workshop, a demonstration workshop, and seven priority setting workshops delivered to representatives from public and private research and development institutions, universities, non-governmental organizations, and other agencies affiliated to COSTECH. The workshops resulted in ranked listings of research priorities for each sub-sector, totalling approximately 800 priorities. This large number was significantly reduced by an expert panel in order to build a manageable instrument aligned to national development plans that could be used to guide research investments. The Tanzania experience is an instructive example of the challenges and issues to be faced in when attempting to identify research priority areas and setting an STI research agenda in low- and middle-income countries. As countries increase their investment in research, it is essential to increase investment in research management and governance as well, a key and much needed capacity for countries to make proper use of research investments.

Science & Technology Review November 2006

DOE Office of Scientific and Technical Information (OSTI.GOV)

Radousky, H

This months issue has the following articles: (1) Expanded Supercomputing Maximizes Scientific Discovery--Commentary by Dona Crawford; (2) Thunder's Power Delivers Breakthrough Science--Livermore's Thunder supercomputer allows researchers to model systems at scales never before possible. (3) Extracting Key Content from Images--A new system called the Image Content Engine is helping analysts find significant but hard-to-recognize details in overhead images. (4) Got Oxygen?--Oxygen, especially oxygen metabolism, was key to evolution, and a Livermore project helps find out why. (5) A Shocking New Form of Laserlike Light--According to research at Livermore, smashing a crystal with a shock wave can result in coherent light.

Managing the three 'P's to improve patient safety: nursing administration's role in managing information technology.

PubMed

Simpson, Roy L

2004-08-01

The Institute of Medicine's landmark report asserted that medical error is seldom the fault of individuals, but the result of faulty healthcare policy/procedure systems. Numerous studies have shown that information technology (IT) can shore up weak systems. For nursing, IT plays a key role in eliminating nursing mistakes. However, managing IT is a function of managing the people who use it. For nursing administrators, successful IT implementations depend on adroit management of the three 'P's: People, processes and (computer) programs. This paper examines critical issues for managing each entity. It discusses the importance of developing trusting organizations, the requirements of process change, how to implement technology in harmony with the organization and the significance of vision.

Accelerating Innovation that Enhances Resource Recovery in the Wastewater Sector: Advancing a National Testbed Network.

PubMed

Mihelcic, James R; Ren, Zhiyong Jason; Cornejo, Pablo K; Fisher, Aaron; Simon, A J; Snyder, Seth W; Zhang, Qiong; Rosso, Diego; Huggins, Tyler M; Cooper, William; Moeller, Jeff; Rose, Bob; Schottel, Brandi L; Turgeon, Jason

2017-07-18

This Feature examines significant challenges and opportunities to spur innovation and accelerate adoption of reliable technologies that enhance integrated resource recovery in the wastewater sector through the creation of a national testbed network. The network is a virtual entity that connects appropriate physical testing facilities, and other components needed for a testbed network, with researchers, investors, technology providers, utilities, regulators, and other stakeholders to accelerate the adoption of innovative technologies and processes that are needed for the water resource recovery facility of the future. Here we summarize and extract key issues and developments, to provide a strategy for the wastewater sector to accelerate a path forward that leads to new sustainable water infrastructures.

Information technology and medical missteps: evidence from a randomized trial.

PubMed

Javitt, Jonathan C; Rebitzer, James B; Reisman, Lonny

2008-05-01

We analyze the effect of a decision support tool designed to help physicians detect and correct medical "missteps". The data comes from a randomized trial of the technology on a population of commercial HMO patients. The key findings are that the new information technology lowers average charges by 6% relative to the control group. This reduction in resource utilization was the result of reduced in-patient charges (and associated professional charges) for the most costly patients. The rate at which identified issues were resolved was generally higher in the study group than in the control group, suggesting the possibility of improvements in care quality along measured dimensions and enhanced diffusion of new protocols based on new clinical evidence.

From medical invention to clinical practice: the reimbursement challenge facing new device procedures and technology--part 2: coverage.

PubMed

Raab, G Gregory; Parr, David H

2006-10-01

This paper, the second of 3 that discuss the reimbursement challenges facing new medical device technology in various issues of this journal, explains the key aspects of coverage that affect the adoption of medical devices. The process Medicare uses to make coverage determinations has become more timely and open over the past several years, but it still lacks the predictability that product innovators prefer. The continued uncertainty surrounding evidence requirements undermines the predictability needed for optimal product planning and innovation. Recent steps taken by the Centers for Medicare and Medicaid Services to provide coverage in return for evidence development should provide patients with access to promising new technologies and procedures while generating important evidence concerning their effectiveness.

"Through the looking glass": optical physics, issues, and the evolution of neuroendoscopy.

PubMed

Zada, Gabriel; Liu, Charles; Apuzzo, Michael L J

2013-02-01

Although the concept of endoscopy has existed for centuries, a practical, working neuroendoscopic system did not emerge until last century, as a result of numerous contributions and refinements in optical technology, illumination sources, and instrumentation. Modern neuroendoscopy would not be a flourishing field, as it is today, without the dedication, innovation, and implementation of emerging technology by key contributors including Maximilian Nitze, Walter Dandy, and Harold Hopkins. Despite several inherent and unique limitations, neuroendoscopic surgery is now performed for a variety of intraventricular, skull base, and spinal operations. In this review, the history of neuroendoscopy, key players who envisioned how the inner workings of the human body could be visualized "through the looking glass," and current state and future potential for neuroendoscopic surgery are discussed. Future directions of neuroendoscopic surgery will likely be guided by further miniaturization in camera and optical technology, innovations in surgical instrumentation design, the introduction of robotics, multi-port minimally invasive surgery, and an enhanced ability to perform bimanual microdissection. Copyright © 2012 Elsevier Inc. All rights reserved.

State of the Art Assessment of NDE Techniques for Aging Cable Management in Nuclear Power Plants FY2015

DOE Office of Scientific and Technical Information (OSTI.GOV)

Glass, Samuel W.; Fifield, Leonard S.; Dib, Gerges

2015-09-08

This milestone report presents an update on the state-of-the-art review and research being conducted to identify key indicators of in-containment cable aging at nuclear power plants (NPPs), and devise in-situ measurement techniques that are sensitive to these key indicators. The motivation for this study stems from the need to address open questions related to nondestructive evaluation (NDE) of aging cables for degradation detection and estimation of condition-based remaining service life. These questions arise within the context of a second round of license extension for NPPs that would extend the operating license to 60 and 80 years. Within the introduction, amore » review of recently published U.S. and international research and guidance for cable aging management programs including NDE technologies is provided. As with any “state-of-the-art” report, the observations are deemed accurate as of the publication date but cannot anticipate evolution of the technology. Moreover, readers are advised that research and development of cable NDE technology is an ongoing issue of global concern.« less

The QKD network: model and routing scheme

NASA Astrophysics Data System (ADS)

Yang, Chao; Zhang, Hongqi; Su, Jinhai

2017-11-01

Quantum key distribution (QKD) technology can establish unconditional secure keys between two communicating parties. Although this technology has some inherent constraints, such as the distance and point-to-point mode limits, building a QKD network with multiple point-to-point QKD devices can overcome these constraints. Considering the development level of current technology, the trust relaying QKD network is the first choice to build a practical QKD network. However, the previous research didn't address a routing method on the trust relaying QKD network in detail. This paper focuses on the routing issues, builds a model of the trust relaying QKD network for easily analysing and understanding this network, and proposes a dynamical routing scheme for this network. From the viewpoint of designing a dynamical routing scheme in classical network, the proposed scheme consists of three components: a Hello protocol helping share the network topology information, a routing algorithm to select a set of suitable paths and establish the routing table and a link state update mechanism helping keep the routing table newly. Experiments and evaluation demonstrates the validity and effectiveness of the proposed routing scheme.

Advanced Technology Composite Fuselage: Program Overview

NASA Technical Reports Server (NTRS)

Ilcewicz, L. B.; Smith, P. J.; Hanson, C. T.; Walker, T. H.; Metschan, S. L.; Mabson, G. E.; Wilden, K. S.; Flynn, B. W.; Scholz, D. B.; Polland, D. R.;

White LEDs and modules in chip-on-board technology for general lighting

NASA Astrophysics Data System (ADS)

Hartmann, Paul; Wenzl, Franz P.; Sommer, Christian; Pachler, Peter; Hoschopf, Hans; Schweighart, Marko; Hartmann, Martin; Kuna, Ladislav; Jakopic, Georg; Leising, Guenther; Tasch, Stefan

2006-08-01

At present, light-emitting diode (LED) modules in various shapes are developed and designed for the general lighting, advertisement, emergency lighting, design and architectural markets. To compete with and to surpass the performance of traditional lighting systems, enhancement of Lumen output and the white light quality as well as the thermal management and the luminary integration are key factors for success. Regarding these issues, white LEDs based on the chip-on-board (COB) technology show pronounced advantages. State-of-the-art LEDs exploiting this technology are now ready to enter the general lighting segments. We introduce and discuss the specific properties of the Tridonic COB technology dedicated for general lighting. This technology, in combination with a comprehensive set of tools to improve and to enhance the Lumen output and the white light quality, including optical simulation, is the scaffolding for the application of white LEDs in emerging areas, for which an outlook will be given.

Lung cancer disparities and African-Americans.

PubMed

Sin, Mo-Kyung

2017-07-01

African-Americans, as historically disadvantaged minorities, have more advanced stages of cancer when diagnosed, lower survival rates, and lower rates of accessing timely care than do Caucasians. Lung cancer incidence and mortality, in particular, are high among African-Americans. The U.S. Preventive Services Task Force recently released an evidence-based lung cancer screening technology called low-dose computerized tomography. High-risk African-Americans might benefit greatly from such screening but not many are aware of this technology. Public health nurses can play a key role in increasing awareness of the technology among African-American communities and encouraging qualified African-Americans to obtain screening. This study discusses issues with lung cancer and smoking among African-Americans, a recently released evidence-based lung cancer screening technology, and implications for public health nurses to enhance uptake of the new screening technology among high-risk African-Americans. © 2017 Wiley Periodicals, Inc.

Information technologies and the sharing of disaster knowledge: the critical role of professional culture.

PubMed

Marincioni, Fausto

2007-12-01

A comparative survey of a diverse sample of 96 US and Italian emergency management agencies shows that the diffusion of new information technologies (IT) has transformed disaster communications. Although these technologies permit access to and the dissemination of massive amounts of disaster information with unprecedented speed and efficiency, barriers rooted in the various professional cultures still hinder the sharing of disaster knowledge. To be effective the available IT must be attuned to the unique settings and professional cultures of the local emergency management communities. Findings show that available technology, context, professional culture and interaction are key factors that affect the knowledge transfer process. Cultural filters appear to influence emergency managers' perceptions of their own professional roles, their vision of the applicability of technology to social issues, and their perspective on the transferability of disaster knowledge. Four cultural approaches to the application of IT to disaster communications are defined: technocentric; geographic,; anthropocentric; and ecocentric.

Creativity as a Key Driver for Designing Context Sensitive Health Informatics.

PubMed

Zhou, Chunfang; Nøhr, Christian

2017-01-01

In order to face the increasing challenges of complexity and uncertainty in practice of health care, this paper aims to discuss how creativity can contribute to design new technologies in health informatics systems. It will firstly introduce the background highlighting creativity as a missing element in recent studies on context sensitive health informatics. Secondly, the concept of creativity and its relationship with activities of technology design will be discussed from a socio-culture perspective. This will be thirdly followed by understanding the roles of creativity in designing new health informatics technologies for meeting needs of high context sensitivity. Finally, a series of potential strategies will be suggested to improve creativity among technology designers working in healthcare industries. Briefly, this paper innovatively bridges two areas studies on creativity and context sensitive health informatics by issues of technology design that also indicates its important significances for future research.

Microbial technology with major potentials for the urgent environmental needs of the next decades.

PubMed

Verstraete, Willy; De Vrieze, Jo

2017-09-01

Several needs in the context of the water-energy-food nexus will become more prominent in the next decades. It is crucial to delineate these challenges and to find opportunities for innovative microbial technologies in the framework of sustainability and climate change. Here, we focus on four key issues, that is the imbalance in the nitrogen cycle, the diffuse emission of methane, the necessity for carbon capture and the deterioration of freshwater reserves. We suggest a set of microbial technologies to deal with each of these issues, such as (i) the production of microbial protein as food and feed, (ii) the control of methanogenic archaea and better use of methanotrophic consortia, (iii) the avoidance of nitrification and (iv) the upgrading of CO 2 to microbial bioproducts. The central message is that instead of using crude methods to exploit microorganisms for degradations, the potentials of the microbiomes should be used to create processes and products that fit the demands of the cyclic market economy. © 2017 The Authors. Microbial Biotechnology published by Society for Applied Microbiology and John Wiley & Sons Ltd.

Unleashing the power of human genetic variation knowledge: New Zealand stakeholder perspectives.

PubMed

Gu, Yulong; Warren, James Roy; Day, Karen Jean

2011-01-01

This study aimed to characterize the challenges in using genetic information in health care and to identify opportunities for improvement. Taking a grounded theory approach, semistructured interviews were conducted with 48 participants to collect multiple stakeholder perspectives on genetic services in New Zealand. Three themes emerged from the data: (1) four service delivery models were identified in operation, including both those expected models involving genetic counselors and variations that do not route through the formal genetic service program; (2) multiple barriers to sharing and using genetic information were perceived, including technological, organizational, institutional, legal, ethical, and social issues; and (3) impediments to wider use of genetic testing technology, including variable understanding of genetic test utilities among clinicians and the limited capacity of clinical genetic services. Targeting these problems, information technologies and knowledge management tools have the potential to support key tasks in genetic services delivery, improve knowledge processes, and enhance knowledge networks. Because of the effect of issues in genetic information and knowledge management, the potential of human genetic variation knowledge to enhance health care delivery has been put on a "leash."

Ethical Considerations in Tissue Engineering Research: Case Studies in Translation

PubMed Central

Baker, Hannah B.; McQuilling, John P.

2016-01-01

Tissue engineering research is a complex process that requires investigators to focus on the relationship between their research and anticipated gains in both knowledge and treatment improvements. The ethical considerations arising from tissue engineering research are similarly complex when addressing the translational progression from bench to bedside, and investigators in the field of tissue engineering act as moral agents at each step of their research along the translational pathway, from early benchwork and preclinical studies to clinical research. This review highlights the ethical considerations and challenges at each stage of research, by comparing issues surrounding two translational tissue engineering technologies: the bioartificial pancreas and a tissue engineered skeletal muscle construct. We present relevant ethical issues and questions to consider at each step along the translational pathway, from the basic science bench to preclinical research to first-in-human clinical trials. Topics at the bench level include maintaining data integrity, appropriate reporting and dissemination of results, and ensuring that studies are designed to yield results suitable for advancing research. Topics in preclinical research include the principle of “modest translational distance” and appropriate animal models. Topics in clinical research include key issues that arise in early-stage clinical trials, including selection of patient-subjects, disclosure of uncertainty, and defining success. The comparison of these two technologies and their ethical issues brings to light many challenges for translational tissue engineering research and provides guidance for investigators engaged in development of any tissue engineering technology. PMID:26282436

Ethical considerations in tissue engineering research: Case studies in translation.

PubMed

Baker, Hannah B; McQuilling, John P; King, Nancy M P

2016-04-15

Tissue engineering research is a complex process that requires investigators to focus on the relationship between their research and anticipated gains in both knowledge and treatment improvements. The ethical considerations arising from tissue engineering research are similarly complex when addressing the translational progression from bench to bedside, and investigators in the field of tissue engineering act as moral agents at each step of their research along the translational pathway, from early benchwork and preclinical studies to clinical research. This review highlights the ethical considerations and challenges at each stage of research, by comparing issues surrounding two translational tissue engineering technologies: the bioartificial pancreas and a tissue engineered skeletal muscle construct. We present relevant ethical issues and questions to consider at each step along the translational pathway, from the basic science bench to preclinical research to first-in-human clinical trials. Topics at the bench level include maintaining data integrity, appropriate reporting and dissemination of results, and ensuring that studies are designed to yield results suitable for advancing research. Topics in preclinical research include the principle of "modest translational distance" and appropriate animal models. Topics in clinical research include key issues that arise in early-stage clinical trials, including selection of patient-subjects, disclosure of uncertainty, and defining success. The comparison of these two technologies and their ethical issues brings to light many challenges for translational tissue engineering research and provides guidance for investigators engaged in development of any tissue engineering technology. Copyright © 2015 Elsevier Inc. All rights reserved.

Technology for libraries and information centers: A seminar in Greece, Portugal, and Turkey

NASA Technical Reports Server (NTRS)

Cotter, Gladys A.

1992-01-01

Information technologies are evolving at a rapid pace in today's world. But the electronic technologies needed to transform today's libraries and information centers into electronic 'libraries without walls', where an end-user has instantaneous access to all the information needed from a desktop workstation, have not yet arrived. Even so, there are many technologies available today that can be applied in the library/information center environment to yield increased productivity. However, not all technologies are right for or successful in every environment. Mission, budget, infrastructure, client profiles, and staff skills are a few of the 'environmental' issues that must be considered when selecting and introducing new technologies into a particular information center. Key technologies used in libraries today are reviewed; it can be used as background for targeting technologies that could be successfully implemented in your own environment to further service goals. Before focusing on a selection of technologies, you must first focus on the strategic goal of your organization. The same technology is not right for every library/information center. An overview of technologies that are readily available and can be applied today is presented.

The injured and diseased farmer: occupational health, embodiment and technologies of harm and care.

PubMed

Lovelock, Kirsten

2012-05-01

Occupational health in agriculture is a significant public health issue in industrialised agricultural nations. This article reports on 26 in-depth interviews with farmers throughout New Zealand. Farmers are exposed to a range of technologies which place them at risk of injury and disease and/or prevent injury and disease. In this article these technologies are respectively conceptualised as technologies of harm and technologies of care. Despite being vulnerable to high rates of injury, fatality and occupationally related diseases the uptake of technologies of care amongst farmers in New Zealand is poor. The analysis draws on body theory to explore the meaning attached to injury and disease and to examine the socio-cultural field of agriculture. It is argued that the key features of subjective embodiment and social, cultural and symbolic capital can undermine the uptake of technologies of care, ensuring poor occupational health outcomes on New Zealand farms. © 2011 The Author. Sociology of Health & Illness © 2011 Foundation for the Sociology of Health & Illness/Blackwell Publishing Ltd.

Beyond STS: A research-based framework for socioscientific issues education

NASA Astrophysics Data System (ADS)

Zeidler, Dana L.; Sadler, Troy D.; Simmons, Michael L.; Howes, Elaine V.

2005-05-01

An important distinction can be made between the science, technology, and society (STS) movement of past years and the domain of socioscientific issues (SSI). STS education as typically practiced does not seem embedded in a coherent developmental or sociological framework that explicitly considers the psychological and epistemological growth of the child, nor the development of character or virtue. In contrast, the SSI movement focuses on empowering students to consider how science-based issues reflect, in part, moral principles and elements of virtue that encompass their own lives, as well as the physical and social world around them. The focus of this paper is to describe a research-based framework of current research and practice that identifies factors associated with reasoning about socioscientific issues and provide a working model that illustrates theoretical and conceptual links among key psychological, sociological, and developmental factors central to SSI and science education.

Random patterns and biometrics for counterfeit deterrence

DOE Office of Scientific and Technical Information (OSTI.GOV)

Tolk, K.M.

1993-12-31

Sandia National Laboratories (SNL) has been working on non-counterfeitable seals, tags, and documents for over fifteen years. During that time, several technologies have been developed that can be applied to deter counterfeiting of identification documents such as ID cards, passports, and possibly credit cards. Two technologies are presented in some detail. The first is reflective particle tagging technology that was developed to help verify treaties limiting the numbers of nuclear weapons that participating parties may possess. This approach uses the random locations and orientations of reflective particles applied to the surface of an item to uniquely identify the item. Themore » resulting tags are secure against even the most determined adversaries. The second technology uses biometric information printed on the document and public key cryptography to ensure that an adversary cannot issue identification documents to unauthorized individuals.« less

Heterogeneous Wireless Mesh Network Technology Evaluation for Space Proximity and Surface Applications

NASA Technical Reports Server (NTRS)

DeCristofaro, Michael A.; Lansdowne, Chatwin A.; Schlesinger, Adam M.

2014-01-01

NASA has identified standardized wireless mesh networking as a key technology for future human and robotic space exploration. Wireless mesh networks enable rapid deployment, provide coverage in undeveloped regions. Mesh networks are also self-healing, resilient, and extensible, qualities not found in traditional infrastructure-based networks. Mesh networks can offer lower size, weight, and power (SWaP) than overlapped infrastructure-perapplication. To better understand the maturity, characteristics and capability of the technology, we developed an 802.11 mesh network consisting of a combination of heterogeneous commercial off-the-shelf devices and opensource firmware and software packages. Various streaming applications were operated over the mesh network, including voice and video, and performance measurements were made under different operating scenarios. During the testing several issues with the currently implemented mesh network technology were identified and outlined for future work.

Telemedicine: Pediatric Applications

PubMed Central

Burke, Bryan L.; Hall, R. W.

2017-01-01

Telemedicine is a technological tool that is improving the health of children around the world. This report chronicles the use of telemedicine by pediatricians and pediatric medical and surgical specialists to deliver inpatient and outpatient care, educate physicians and patients, and conduct medical research. It also describes the importance of telemedicine in responding to emergencies and disasters and providing access to pediatric care to remote and underserved populations. Barriers to telemedicine expansion are explained, such as legal issues, inadequate payment for services, technology costs and sustainability, and the lack of technology infrastructure on a national scale. Although certain challenges have constrained more widespread implementation, telemedicine’s current use bears testimony to its effectiveness and potential. Telemedicine’s widespread adoption will be influenced by the implementation of key provisions of the Patient Protection and Affordable Care Act, technological advances, and growing patient demand for virtual visits. PMID:26122813

Novel Multi-Party Quantum Key Agreement Protocol with G-Like States and Bell States

NASA Astrophysics Data System (ADS)

Min, Shi-Qi; Chen, Hua-Ying; Gong, Li-Hua

2018-03-01

A significant aspect of quantum cryptography is quantum key agreement (QKA), which ensures the security of key agreement protocols by quantum information theory. The fairness of an absolute security multi-party quantum key agreement (MQKA) protocol demands that all participants can affect the protocol result equally so as to establish a shared key and that nobody can determine the shared key by himself/herself. We found that it is difficult for the existing multi-party quantum key agreement protocol to withstand the collusion attacks. Put differently, it is possible for several cooperated and untruthful participants to determine the final key without being detected. To address this issue, based on the entanglement swapping between G-like state and Bell states, a new multi-party quantum key agreement protocol is put forward. The proposed protocol makes full use of EPR pairs as quantum resources, and adopts Bell measurement and unitary operation to share a secret key. Besides, the proposed protocol is fair, secure and efficient without involving a third party quantum center. It demonstrates that the protocol is capable of protecting users' privacy and meeting the requirement of fairness. Moreover, it is feasible to carry out the protocol with existing technologies.

Novel Multi-Party Quantum Key Agreement Protocol with G-Like States and Bell States

NASA Astrophysics Data System (ADS)

Min, Shi-Qi; Chen, Hua-Ying; Gong, Li-Hua

2018-06-01

A significant aspect of quantum cryptography is quantum key agreement (QKA), which ensures the security of key agreement protocols by quantum information theory. The fairness of an absolute security multi-party quantum key agreement (MQKA) protocol demands that all participants can affect the protocol result equally so as to establish a shared key and that nobody can determine the shared key by himself/herself. We found that it is difficult for the existing multi-party quantum key agreement protocol to withstand the collusion attacks. Put differently, it is possible for several cooperated and untruthful participants to determine the final key without being detected. To address this issue, based on the entanglement swapping between G-like state and Bell states, a new multi-party quantum key agreement protocol is put forward. The proposed protocol makes full use of EPR pairs as quantum resources, and adopts Bell measurement and unitary operation to share a secret key. Besides, the proposed protocol is fair, secure and efficient without involving a third party quantum center. It demonstrates that the protocol is capable of protecting users' privacy and meeting the requirement of fairness. Moreover, it is feasible to carry out the protocol with existing technologies.

Genome editing systems in novel therapies.

PubMed

Jang, Yoon-Young; Cai, Liuhong; Ye, Zhaohui

2016-01-01

Genome editing is the process in which DNA sequences at precise genomic locations are modified. In the past three decades, genome editing by homologous recombination has been successfully performed in mouse for generating genetic models. The low efficiency of this process in human cells, however, had prevented its clinical application until the recent advancements in designer endonuclease technologies. The significantly improved genome editing efficiencies aided by ZFN, TALEN, and CRISPR systems provide unprecedented opportunities not only for biomedical research, but also for developing novel therapies. Applications based on these genome editing tools to disrupt deleterious genes, correct genetic mutations, deliver functional transgenes more effectively or even modify the epigenetic landscape are being actively investigated for gene and cell therapy purposes. Encouraging results have been obtained in limited clinical trials in the past two years. While most of the applications are still in proof-of-principle or preclinical development stages, it is anticipated that the coming years will see increasing clinical success in novel therapies based on the modern genome editing technologies. It should be noted that critical issues still remain before the technologies can be translated into more reliable therapies. These key issues include off-target evaluation, establishing appropriate preclinical models and improving the currently low efficiency of homology-based precise gene replacement. In this review we discuss the preclinical and clinical studies aiming at translating the genome editing technologies as well as the issues that are important for more successful translation.

Satellite Power Systems (SPS) concept definition study (exhibit C)

NASA Technical Reports Server (NTRS)

Hanley, G. M.

1978-01-01

A coplanar satellite conceptual approach was defined. This effort included several trade studies related to satellite design and also construction approaches for this satellite. A transportation system, consistent with this concept, was also studied, including an electric orbit transfer vehicle and a parallel-burn heavy lift launch vehicle. Work on a solid state microwave concept continued and several alternative approaches were evaluated. Computer determination of an optimized transistor and circuit design was also continued. Experiment/verification planning resulted in the development of a total solar array and microwave technology development plan, as well as definition of near-term research to evaluate key technology issues.

Migration to Broadband and Ubiquitous Environments by Using Fiber-Optic Technologies in Access/Home Areas

NASA Astrophysics Data System (ADS)

Oguchi, Kimio

2016-03-01

The recent dramatic advances in information and communication technologies have yielded new environments. However, adoption still differs area by area. To realize the future broadband environment that everyone can enjoy everywhere, several technical issues have to be resolved before network penetration becomes ubiquitous. One such key is the use of fiber optics for the home and mobile services. This article overviews initial observations drawn from numerical survey data gathered over the last decade in several countries/regions, and gives some example scenarios for network/service evolution. One result implies that implementing new/future services must consider the gross domestic product impact.

Second NASA Workshop on Wiring for Space Applications

NASA Technical Reports Server (NTRS)

1994-01-01

This document contains the proceedings of the Second NASA Workshop on Wiring for Space Applications held at NASA LeRC in Cleveland, OH, 6-7 Oct. 1993. The workshop was sponsored by NASA Headquarters Code QW Office of Safety and Mission Quality, Technical Standards Division and hosted by NASA LeRC, Power Technology Division, Electrical Components and Systems Branch. The workshop addressed key technology issues in the field of electrical power wiring for space applications. Speakers from government, industry, and academia presented and discussed topics on arc tracking phenomena, wiring system design, insulation constructions, and system protection. Presentation materials provided by the various speakers are included in this document.

Surface chemistry: Key to control and advance myriad technologies

PubMed Central

Yates, John T.; Campbell, Charles T.

2011-01-01

This special issue on surface chemistry is introduced with a brief history of the field, a summary of the importance of surface chemistry in technological applications, a brief overview of some of the most important recent developments in this field, and a look forward to some of its most exciting future directions. This collection of invited articles is intended to provide a snapshot of current developments in the field, exemplify the state of the art in fundamental research in surface chemistry, and highlight some possibilities in the future. Here, we show how those articles fit together in the bigger picture of this field. PMID:21245359

Perovskite Solar Cells and Devices at EPFL Valais Wallis.

PubMed

Nazeeruddin, Mohammad Khaja

2016-09-22

Stability required! Perovskite solar cells have emerged as one of the most exciting fields of research, owing to their impressive rise in power conversion efficiency surpassing 22% in six short years of research. Current research is focused on ways to improve stability of perovskite-based devices, a key characteristic required to bring this technology from the lab into the market. In this Editorial, guest editor Prof. Mohammad Khaja Nazeeruddin describes the context of this Special Issue, and summarizes the work being performed in his research group toward this low-cost near-future photovoltaic technology. © 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Crew systems: integrating human and technical subsystems for the exploration of space.

PubMed

Connors, M M; Harrison, A A; Summit, J

1994-07-01

Space exploration missions will require combining human and technical subsystems into overall "crew systems" capable of performing under the rigorous conditions of outer space. This report describes substantive and conceptual relationships among humans, intelligent machines, and communication systems, and explores how these components may be combined to complement and strengthen one another. We identify key research issues in the combination of humans and technology and examine the role of individual differences, group processes, and environmental conditions. We conclude that a crew system is, in effect, a social cyborg, a living system consisting of multiple individuals whose capabilities are extended by advanced technology.

Crew systems: integrating human and technical subsystems for the exploration of space

NASA Technical Reports Server (NTRS)

Connors, M. M.; Harrison, A. A.; Summit, J.

1994-01-01

Space exploration missions will require combining human and technical subsystems into overall "crew systems" capable of performing under the rigorous conditions of outer space. This report describes substantive and conceptual relationships among humans, intelligent machines, and communication systems, and explores how these components may be combined to complement and strengthen one another. We identify key research issues in the combination of humans and technology and examine the role of individual differences, group processes, and environmental conditions. We conclude that a crew system is, in effect, a social cyborg, a living system consisting of multiple individuals whose capabilities are extended by advanced technology.

Target Fabrication Technology and New Functional Materials for Laser Fusion and Laser-Plasma Experiment

NASA Astrophysics Data System (ADS)

Nagai, Keiji; Norimatsu, Takayoshi; Izawa, Yasukazu

Target fabrication technique is a key issue of laser fusion. We present a comprehensive, up-to-data compilation of laser fusion target fabrication and relating new materials. To achieve highly efficient laser implosion, organic and inorganic highly spherical millimeter-sized capsules and cryogenic hydrogen layers inside should be uniform in diameter and thickness within sub-micrometer ˜ nanometer error. Porous structured targets and molecular cluster targets are required for laser-plasma experiments and applications. Various technologies and new materials concerning above purposes are summarized including fast-ignition targets, equation-of-state measurement targets, high energy ion generation targets, etc.

Toward a patient-centric medical information model: issues and challenges for US adoption.

PubMed

Lorence, Daniel; Monatesti, Sabatini; Margenthaler, Robert; Hoadley, Ellen

2005-01-01

As the USA moves, incrementally, toward evidence-based medicine, there is growing awareness of the importance of innovation in information management. Mandates for change include improved use of resources, accelerated diffusion of knowledge and an advanced consumer role. Key among these requirements is the need for a fundamentally different patient information recording system. Within the challenges identified in the most recent national health information technology initiative, we propose a model for an electronic, patient-centric medical information infrastructure, highlighting a transportable, scalable and integrated resource. We identify resources available for technology transfer, promoting consumers as integral parts of the collaborative medical decision-making process.

Preservation of Fertility Potential for Gender and Sex Diverse Individuals.

PubMed

Johnson, Emilie K; Finlayson, Courtney

2016-01-01

Gender and sex diverse individuals-transgender individuals and those with disorders of sex development (DSD)-both face medical treatments that may impair biological fertility potential. Young DSD patients also often have abnormal gonadal development. Fertility preservation for these populations has historically been poorly understood and rarely addressed. Future fertility should be discussed with gender and sex diverse individuals, particularly given recent advances in fertility preservation technologies and evolving views of fertility potential. Key ethical issues include parental proxy decision-making and uncertainty regarding prepubertal fertility preservation technologies. Many opportunities exist for advancing fertility-related care and research for transgender and DSD patients.

Advanced technologies for encryption of satellite links

NASA Astrophysics Data System (ADS)

McMahan, Sherry S.

The use of encryption on satellite links is discussed. Advanced technology exists to provide transmission security for large earth station with data rates up to 50 megabits per second. One of the major concerns in the use of encryption equipment with very small aperture terminals (VSAT) is the key management issue and the related operational costs. The low cost requirement and the lack of physical protection of remote VSATs place severe constraints on the design of encryption equipment. Encryption may be accomplished by embedding a tamper proof encryption module into the baseband unit of each VSAT. VSAT networks are usually star networks where there is a single large earth station that serves as a hub and all satellite communications takes place between each VSAT and the hub earth station. The hub earth station has the secret master key of each VSAT. These master keys are used to downline load encrypted session keys to each VSAT. A more secure alternative is to use public key techniques where each embedded VSAT encryption module internally generates its own secret and public numbers. The secret number never leaves the module while the public number is sent to the hub at the time of initialization of the encryption module into the VSAT. Physical access control to encryption modules of VSAT systems can be implemented using passwords, smart cards or biometrics.

The future of consumer cameras

NASA Astrophysics Data System (ADS)

Battiato, Sebastiano; Moltisanti, Marco

2015-03-01

In the last two decades multimedia, and in particular imaging devices (camcorders, tablets, mobile phones, etc.) have been dramatically diffused. Moreover the increasing of their computational performances, combined with an higher storage capability, allows them to process large amount of data. In this paper an overview of the current trends of consumer cameras market and technology will be given, providing also some details about the recent past (from Digital Still Camera up today) and forthcoming key issues.

Common Technologies for Environmental Research Infrastructures in ENVRIplus

NASA Astrophysics Data System (ADS)

Paris, Jean-Daniel

2016-04-01

Environmental and geoscientific research infrastructures (RIs) are dedicated to distinct aspects of the ocean, atmosphere, ecosystems, or solid Earth research, yet there is significant commonality in the way they conceive, develop, operate and upgrade their observation systems and platforms. Many environmental Ris are distributed network of observatories (be it drifting buoys, geophysical observatories, ocean-bottom stations, atmospheric measurements sites) with needs for remote operations. Most RIs have to deal with calibration and standardization issues. RIs use a variety of measurements technologies, but this variety is based on a small, common set of physical principles. All RIs have set their own research and development priorities, and developed their solution to their problems - however many problems are common across RIs. Finally, RIs may overlap in terms of scientific perimeter. In ENVRIplus we aim, for the first time, to identify common opportunities for innovation, to support common research and development across RIs on promising issues, and more generally to create a forum to spread state of the art techniques among participants. ENVRIplus activities include 1) measurement technologies: where are the common types of measurement for which we can share expertise or common development? 2) Metrology : how do we tackle together the diversified challenge of quality assurance and standardization? 3) Remote operations: can we address collectively the need for autonomy, robustness and distributed data handling? And 4) joint operations for research: are we able to demonstrate that together, RIs are able to provide relevant information to support excellent research. In this process we need to nurture an ecosystem of key players. Can we involve all the key technologists of the European RIs for a greater mutual benefit? Can we pave the way to a growing common market for innovative European SMEs, with a common programmatic approach conducive to targeted R&D? Can we develop a common metrological language adapted to the observation of our environment? We aim at creating a space for exchange on the "hardware" issues of our networks of observatories, a forum that allows fast transmission across RIs of best practices and state of the art technology, a laboratory for joint research and co-development, where research infrastructures and their communities join efforts on well-identified objectives.

Implicit prosody mining based on the human eye image capture technology

NASA Astrophysics Data System (ADS)

Gao, Pei-pei; Liu, Feng

2013-08-01

The technology of eye tracker has become the main methods of analyzing the recognition issues in human-computer interaction. Human eye image capture is the key problem of the eye tracking. Based on further research, a new human-computer interaction method introduced to enrich the form of speech synthetic. We propose a method of Implicit Prosody mining based on the human eye image capture technology to extract the parameters from the image of human eyes when reading, control and drive prosody generation in speech synthesis, and establish prosodic model with high simulation accuracy. Duration model is key issues for prosody generation. For the duration model, this paper put forward a new idea for obtaining gaze duration of eyes when reading based on the eye image capture technology, and synchronous controlling this duration and pronunciation duration in speech synthesis. The movement of human eyes during reading is a comprehensive multi-factor interactive process, such as gaze, twitching and backsight. Therefore, how to extract the appropriate information from the image of human eyes need to be considered and the gaze regularity of eyes need to be obtained as references of modeling. Based on the analysis of current three kinds of eye movement control model and the characteristics of the Implicit Prosody reading, relative independence between speech processing system of text and eye movement control system was discussed. It was proved that under the same text familiarity condition, gaze duration of eyes when reading and internal voice pronunciation duration are synchronous. The eye gaze duration model based on the Chinese language level prosodic structure was presented to change previous methods of machine learning and probability forecasting, obtain readers' real internal reading rhythm and to synthesize voice with personalized rhythm. This research will enrich human-computer interactive form, and will be practical significance and application prospect in terms of disabled assisted speech interaction. Experiments show that Implicit Prosody mining based on the human eye image capture technology makes the synthesized speech has more flexible expressions.

Ergonomics issues in national identity card for homeland security.

PubMed

Yeow, Paul H P; Yuen, Y Y; Loo, W H

2013-09-01

Ever since the 9/11 terrorist attack, many countries are considering the use of smart national identity card (SNIC) which has the ability to identify terrorists due to its biometric verification function. However, there are many ergonomics issues in the use of SNIC, e.g. card credibility. This research presents a case study survey of Malaysian users. Although most citizens (>96%) own MyKad (Malaysia SNIC), many do not carry it around and use its applications. This defeats one of its main purposes, i.e. combating terrorism. Thus, the research investigates ergonomics issues affecting the citizens' Intention to Use (ITU) MyKad for homeland security by using an extended technology acceptance model. Five hundred questionnaires were collected and analysed using structural equation modelling. Results show that perceived credibility and performance expectancy are the key issues. The findings provide many countries with insights into methods of addressing ergonomics issues and increasing adoption of SNIC for homeland security. Copyright © 2012 Elsevier Ltd and The Ergonomics Society. All rights reserved.

Human Choice and CCS Deployment: What have we learned from the social sciences about CCS?

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dooley, James J.

2013-08-20

It is my pleasure to present this Virtual Special Issue of key social science papers that have been published in the International Journal of Greenhouse Gas Control (IJGCC). These papers show that the social science research community has significantly advanced the state-of-the-art from vague discussions about the “acceptance of CCS” to a body of deeply insightful and actionable knowledge about how CCS is likely to be framed and how framing will impact the ultimate deployment of CCS as a means of mitigating anthropogenic climate change. The papers assembled here shed light on core issues such as how do humans makemore » decisions about a new technology like CCS that they have no direct personal experience with and what is it is about “new” technologies that we find unsettling. These papers also speak to what are the best, and for that matter the worst, ways of presenting inherently highly technical information to lay audiences, including insights about the substance of the information, the form in which the information is delivered, and who delivers it. An extended editorial about this virtual special issue is freely available on ScienceDirect. I hope you find the papers contained in this Virtual Issue to be as informative and insightful as I do.« less

Modeling and analysis of tritium dynamics in a DT fusion fuel cycle

NASA Astrophysics Data System (ADS)

Kuan, William

1998-11-01

A number of crucial design issues have a profound effect on the dynamics of the tritium fuel cycle in a DT fusion reactor, where the development of appropriate solutions to these issues is of particular importance to the introduction of fusion as a commercial system. Such tritium-related issues can be classified according to their operational, safety, and economic impact to the operation of the reactor during its lifetime. Given such key design issues inherent in next generation fusion devices using the DT fuel cycle development of appropriate models can then lead to optimized designs of the fusion fuel cycle for different types of DT fusion reactors. In this work, two different types of modeling approaches are developed and their application to solving key tritium issues presented. For the first approach, time-dependent inventories, concentrations, and flow rates characterizing the main subsystems of the fuel cycle are simulated with a new dynamic modular model of a fusion reactor's fuel cycle, named X-TRUFFLES (X-Windows TRitiUm Fusion Fuel cycLE dynamic Simulation). The complex dynamic behavior of the recycled fuel within each of the modeled subsystems is investigated using this new integrated model for different reactor scenarios and design approaches. Results for a proposed fuel cycle design taking into account current technologies are presented, including sensitivity studies. Ways to minimize the tritium inventory are also assessed by examining various design options that could be used to minimize local and global tritium inventories. The second modeling approach involves an analytical model to be used for the calculation of the required tritium breeding ratio, i.e., a primary design issue which relates directly to the feasibility and economics of DT fusion systems. A time-integrated global tritium balance scheme is developed and appropriate analytical expressions are derived for tritium self-sufficiency relevant parameters. The easy exploration of the large parameter space of the fusion fuel cycle can thus be conducted as opposed to previous modeling approaches. Future guidance for R&D (research and development) in fusion nuclear technology is discussed in view of possible routes to take in reducing the tritium breeding requirements of DT fusion reactors.

The U.S. Department of Energy - Office of Environmental Management Cooperation Program with the Russian Federal Atomic Energy Agency (ROSATOM)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gerdes, K.D.; Holtzscheiter, E.W.

2006-07-01

The U.S. Department of Energy's (DOE) Office of Environmental Management (EM) has collaborated with the Russian Federal Atomic Energy Agency - Rosatom (formerly Minatom) for 14 years on waste management challenges of mutual concern. Currently, EM is cooperating with Rosatom to explore issues related to high-level waste and investigate Russian experience and technologies that could support EM site cleanup needs. EM and Rosatom are currently implementing six collaborative projects on high-level waste issues: 1) Advanced Melter Technology Application to the U.S. DOE Defense Waste Processing Facility (DWPF) - Cold Crucible Induction Heated Melter (CCIM); 2) - Design Improvements to themore » Cold Crucible Induction Heated Melter; 3) Long-term Performance of Hanford Low-Activity Glasses in Burial Environments; 4) Low-Activity-Waste (LAW) Glass Sulfur Tolerance; 5) Improved Retention of Key Contaminants of Concern in Low Temperature Immobilized Waste Forms; and, 6) Documentation of Mixing and Retrieval Experience at Zheleznogorsk. Preliminary results and the path forward for these projects will be discussed. An overview of two new projects 7) Entombment technology performance and methodology for the Future 8) Radiation Migration Studies at Key Russian Nuclear Disposal Sites is also provided. The purpose of this paper is to provide an overview of EM's objectives for participating in cooperative activities with the Russian Federal Atomic Energy Agency, present programmatic and technical information on these activities, and outline specific technical collaborations currently underway and planned to support DOE's cleanup and closure mission. (authors)« less

Economic evaluation of integrated new technologies for health and social care: Suggestions for policy makers, users and evaluators.

PubMed

Wildman, John; McMeekin, Peter; Grieve, Eleanor; Briggs, Andrew

2016-11-01

With an ageing population there is a move towards the use of assisted living technologies (ALTs) to provide social care and health care services, and to improve service processes. These technologies are at the forefront of the integration of health and social care. However, economic evaluations of ALTs, and indeed economic evaluations of any interventions providing both health benefits and benefits beyond health are complex. This paper considers the challenges faced by evaluators and presents a method of economic evaluation for use with interventions where traditional methods may not be suitable for informing funders and decision makers. We propose a method, combining economic evaluation techniques, that can accommodate health outcomes and outcomes beyond health through the use of a common numeraire. Such economic evaluations can benefit both the public and private sector, firstly by ensuring the efficient allocation of resources. And secondly, by providing information for individuals who, in the market for ALTs, face consumption decisions that are infrequent and for which there may be no other sources of information. We consider these issues in the welfarist, extra-welfarist and capabilities frameworks, which we link to attributes in an individual production model. This approach allows for the valuation of the health component of any such intervention and the valuation of key social care attributes and processes. Finally, we present a set of considerations for evaluators highlighting the key issues that need to be considered in this type of economic evaluation. Crown Copyright © 2016. Published by Elsevier Ltd. All rights reserved.

Immersion lithography defectivity analysis at DUV inspection wavelength

NASA Astrophysics Data System (ADS)

Golan, E.; Meshulach, D.; Raccah, N.; Yeo, J. Ho.; Dassa, O.; Brandl, S.; Schwarz, C.; Pierson, B.; Montgomery, W.

2007-03-01

Significant effort has been directed in recent years towards the realization of immersion lithography at 193nm wavelength. Immersion lithography is likely a key enabling technology for the production of critical layers for 45nm and 32nm design rule (DR) devices. In spite of the significant progress in immersion lithography technology, there remain several key technology issues, with a critical issue of immersion lithography process induced defects. The benefits of the optical resolution and depth of focus, made possible by immersion lithography, are well understood. Yet, these benefits cannot come at the expense of increased defect counts and decreased production yield. Understanding the impact of the immersion lithography process parameters on wafer defects formation and defect counts, together with the ability to monitor, control and minimize the defect counts down to acceptable levels is imperative for successful introduction of immersion lithography for production of advanced DR's. In this report, we present experimental results of immersion lithography defectivity analysis focused on topcoat layer thickness parameters and resist bake temperatures. Wafers were exposed on the 1150i-α-immersion scanner and 1200B Scanner (ASML), defect inspection was performed using a DUV inspection tool (UVision TM, Applied Materials). Higher sensitivity was demonstrated at DUV through detection of small defects not detected at the visible wavelength, indicating on the potential high sensitivity benefits of DUV inspection for this layer. The analysis indicates that certain types of defects are associated with different immersion process parameters. This type of analysis at DUV wavelengths would enable the optimization of immersion lithography processes, thus enabling the qualification of immersion processes for volume production.

French Health Technology Assessment of Antineoplastic Drugs Indicated in the Treatment of Solid Tumours: Perspective for Future Trends.

PubMed

Chouaid, Christos; Borget, Isabelle; Braun, Eric; Bazil, Marie-Laure; Schaetz, Dominique; Rémuzat, Cécile; Toumi, Mondher

2016-08-01

France is one of the European countries that spend the most on oncology drugs. To keep pharmaceutical expenditure under control, Health Authorities highly scrutinize market access of costly medicines. To assess current and future trends in French health technology assessment (HTA) of antineoplastic drugs indicated in the treatment of solid tumours. A review of the SMR and ASMR drivers of the Transparency Committee (CT) opinions issued for antineoplastic drugs indicated in the treatment of solid tumours and approved between 2009 and 2014 was performed to assess current trends in French health technology assessment (HTA), complemented by an expert board consultation to capture the critical issues on the future of antineoplastic drugs HTA. Thirty-one drugs indicated for the treatment of solid tumours were identified (77 % targeted therapies). Initial CT assessments were available for 26 drugs. Four key items in the CT assessment were identified: 1) Clinical trial methodology; 2) Acceptance of progression-free survival (PFS) as a valuable endpoint; 3) Transferability of clinical trials in clinical practice; 4) Unpredictability of CT decisions. Experts raised the important development of personalised medicines in oncology and key challenges for oncology products to generate information expected from HTA perspective. The French system remains committed to its values and philosophy (access of all innovations for everybody) which are threatened by the increasing launch of innovative therapies and budget constraint. Both HTA decision framework evolution and revision of the current pricing process should be considered in France to cope with these new challenges.

Recent advances in the development of new transgenic animal technology.

PubMed

Miao, Xiangyang

2013-03-01

Transgenic animal technology is one of the fastest growing biotechnology areas. It is used to integrate exogenous genes into the animal genome by genetic engineering technology so that these genes can be inherited and expressed by offspring. The transgenic efficiency and precise control of gene expression are the key limiting factors in the production of transgenic animals. A variety of transgenic technologies are available. Each has its own advantages and disadvantages and needs further study because of unresolved technical and safety issues. Further studies will allow transgenic technology to explore gene function, animal genetic improvement, bioreactors, animal disease models, and organ transplantation. This article reviews the recently developed animal transgenic technologies, including the germ line stem cell-mediated method to improve efficiency, gene targeting to improve accuracy, RNA interference-mediated gene silencing technology, zinc-finger nuclease gene targeting technology and induced pluripotent stem cell technology. These new transgenic techniques can provide a better platform to develop transgenic animals for breeding new animal varieties and promote the development of medical sciences, livestock production, and other fields.

[The principle of caution in medical education].

PubMed

Binetti, P

2004-10-01

The relationship between the modern man and technology is full of paradoxes, even if it has been continuously proven that they cannot do without each other. From the debate in this field the superiority of the man on the world of technology has emerged, but not for those owning new generation technologies on the other men in the pre-tech era. The dominance belongs always to the man, as creator of the technology and user of the same, but above all to those having a competitive advantage because capable of grasping the innovation of new generation technologies and dedicating them to their service. The real problem is the intentional use done of technology seen as a service instrument to old and new patients or as an instrument of power for defining one's supremacy. The key point of the issue is ethics that is the responsibility with which men, who own the new generation technologies, renounce to exploit the other men using these new technologies, and show their superiority on technology, controlling their procedure and aims, since the man is definitively the person who re-invents it continuously.

Design principles in the development of (public) health information infrastructures.

PubMed

Neame, Roderick

2012-01-01

In this article the author outlines the key issues in the development of a regional health information infrastructure suitable for public health data collections. A set of 10 basic design and development principles as used and validated in the development of the successful New Zealand National Health Information Infrastructure in 1993 are put forward as a basis for future developments. The article emphasises the importance of securing clinical input into any health data that is collected, and suggests strategies whereby this may be achieved, including creating an information economy alongside the care economy. It is suggested that the role of government in such developments is to demonstrate leadership, to work with the sector to develop data, messaging and security standards, to establish key online indexes, to develop data warehouses and to create financial incentives for adoption of the infrastructure and the services it delivers to users. However experience suggests that government should refrain from getting involved in local care services data infrastructure, technology and management issues.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kenji Akagi; Masayuki Ishiwata; Kenji Araki

In nuclear power plant construction, countless variety of parts, products, and jigs more than one million are treated under construction. Furthermore, strict traceability to the history of material, manufacturing, and installation is required for all products from the start to finish of the construction, which enforce much workforce and many costs at every project. In an addition, the operational efficiency improvement is absolutely essential for the effective construction to reduce the initial investment for construction. As one solution, RFID (Radio Frequent Identification) application technology, one of the fundamental technologies to realize a ubiquitous society, currently expands its functionality and generalmore » versatility at an accelerating pace in mass-production industry. Hitachi believes RFID technology can be useful of one of the key solutions for the issues in non-mass production industry as well. Under this situation, Hitachi initiated the development of next generation plant concept (ubiquitous plant construction technology) which utilizes information and RFID technologies. In this paper, our application plans of RFID technology to nuclear power is described. (authors)« less

Policy implications of technologies for cognitive enhancement

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sarewitz, Daniel R.; Karas, Thomas H.

2007-02-01

The Advanced Concepts Group at Sandia National Laboratory and the Consortium for Science, Policy and Outcomes at Arizona State University convened a workshop in May 2006 to explore the potential policy implications of technologies that might enhance human cognitive abilities. The group's deliberations sought to identify core values and concerns raised by the prospect of cognitive enhancement. The workshop focused on the policy implications of various prospective cognitive enhancements and on the technologies/nanotechnology, biotechnology, information technology, and cognitive science--that enable them. The prospect of rapidly emerging technological capabilities to enhance human cognition makes urgent a daunting array of questions, tensions,more » ambitions, and concerns. The workshop elicited dilemmas and concerns in ten overlapping areas: science and democracy; equity and justice; freedom and control; intergenerational issues; ethics and competition; individual and community rights; speed and deliberations; ethical uncertainty; humanness; and sociocultural risk. We identified four different perspectives to encompass the diverse issues related to emergence of cognitive enhancement technologies: (1) Laissez-faire--emphasizes freedom of individuals to seek and employ enhancement technologies based on their own judgment; (2) Managed technological optimism--believes that while these technologies promise great benefits, such benefits cannot emerge without an active government role; (3) Managed technological skepticism--views that the quality of life arises more out of society's institutions than its technologies; and (4) Human Essentialism--starts with the notion of a human essence (whether God-given or evolutionary in origin) that should not be modified. While the perspectives differ significantly about both human nature and the role of government, each encompasses a belief in the value of transparency and reliable information that can allow public discussion and decisions about cognitive enhancement. The practical question is how to foster productive discussions in a society whose attention is notably fragmented and priorities notably diverse. The question of what to talk about remains central, as each of the four perspectives is concerned about different things. Perhaps the key issue for initial clarification as a condition for productive democratic discussion has to do with the intended goals of cognitive enhancement, and the mechanisms for allowing productive deliberation about these goals.« less

Positive change: connecting the virtual and the real.

PubMed

Wiederhold, Brenda K; Riva, Giuseppe

2014-01-01

How do we lastingly change our lives for the better? There is not an easy answer to this question. However, due to the advances in psychology and neuroscience, now we have a better view of personal change, that is not limited to a specific viewpoint. In particular, the emergence of integrative and transdiagnostic accounts suggests that change is contextual, depending on the person, the issues, and the situation. More, personal change is a process, happening in discontinuous and nonlinear ways, following life transitions and traumatic events. In this process a key role can be played by technology: using the "Positive Technology" approach it is possible to use technology to manipulate the quality of experience, with the goal of increasing wellness, and generating strengths and resilience in individuals, organizations and society.

Are Key Principles for improved health technology assessment supported and used by health technology assessment organizations?

PubMed

Neumann, Peter J; Drummond, Michael F; Jönsson, Bengt; Luce, Bryan R; Schwartz, J Sanford; Siebert, Uwe; Sullivan, Sean D

2010-01-01

Previously, our group-the International Working Group for HTA Advancement-proposed a set of fifteen Key Principles that could be applied to health technology assessment (HTA) programs in different jurisdictions and across a range of organizations and perspectives. In this commentary, we investigate the extent to which these principles are supported and used by fourteen selected HTA organizations worldwide. We find that some principles are broadly supported: examples include being explicit about HTA goals and scope; considering a wide range of evidence and outcomes; and being unbiased and transparent. Other principles receive less widespread support: examples are addressing issues of generalizability and transferability; being transparent on the link between HTA findings and decision-making processes; considering a full societal perspective; and monitoring the implementation of HTA findings. The analysis also suggests a lack of consensus in the field about some principles--for example, considering a societal perspective. Our study highlights differences in the uptake of key principles for HTA and indicates considerable room for improvement for HTA organizations to adopt principles identified to reflect good HTA practices. Most HTA organizations espouse certain general concepts of good practice--for example, assessments should be unbiased and transparent. However, principles that require more intensive follow-up--for example, monitoring the implementation of HTA findings--have received little support and execution.

Satellite mirror systems for providing terrestrial power - System concept

NASA Technical Reports Server (NTRS)

Billman, K. W.; Gilbreath, W. P.; Bowen, S. W.

1978-01-01

A system of orbiting reflectors, SOLARES, has been studied as a possible means of providing terrestrial power with a space system of minimum mass and complexity. The key impact that such a system, providing continuous and slightly concentrated insolation, makes on the economic viability of solar farming is demonstrated. New developments in solar sailing are incorporated to reduce mirror mass and transportation cost. The system is compatible with incremental implementation and continual expansion to produce the world's power needs. Key technology, environmental, and economic issues and payoffs are identified. SOLARES appears to be economically superior to other advanced, and even conventional, energy systems and could be scaled to completely abate our fossil fuel usage for power generation.

An Overview of Key Indicators and Evaluation Tools for Assessing Housing Quality: A Literature Review

NASA Astrophysics Data System (ADS)

Sinha, Rajan Chandra; Sarkar, Satyaki; Mandal, Nikhil Ranjan

2017-09-01

The issue of the housing quality has been addressed for various stakeholders at different levels. There exist varied opinion about its measurability and possible applications. Thus the study is carried out to have an insight into the concept of housing quality and its relevance in the changing demographics, technological, socio-economic and socio-cultural conditions. This study attempts to summarize the literature that addresses past research concerned with factors related to housing quality, its measurement methodology and critically examines the broad key indicators identified to have impact upon enhancing the housing quality. This work discusses the recent techniques which are extensively used for analysis of housing quality.

Physician leaders of medical groups face increasing challenges.

PubMed

Gerbarg, Zack

2002-10-01

Physician leadership has emerged as one of the biggest challenges and opportunities for medical group success. The environment for medical groups has become increasingly complex as the result of five major factors: 1) varying reimbursement methods, 2) growth in the size of groups, 3) technology investments, 4) sale and merger of groups, and 5) regulatory and legal issues. Striking the right balance between too little or too much physician involvement in leading medical groups is a key business decision. Most large, successful businesses view investment in their leaders as critical for success. Medical groups can learn from other businesses that investment in education, coaching, and succession planning for leaders is a key to long-term success.

Technologies to measure and modify physical activity and eating environments.

PubMed

King, Abby C; Glanz, Karen; Patrick, Kevin

2015-05-01

The explosion of technologic advances in information capture and delivery offers unparalleled opportunities to assess and modify built and social environments in ways that can positively impact health behaviors. This paper highlights some potentially transformative current and emerging trends in the technology arena applicable to environmental context-based assessment and intervention relevant to physical activity and dietary behaviors. A team of experts convened in 2013 to discuss the main issues related to technology use in assessing and changing built environments for health behaviors particularly relevant to obesity prevention. Each expert was assigned a specific domain to describe, commensurate with their research and expertise in the field, along with examples of specific applications. This activity was accompanied by selective examination of published literature to cover the main issues and elucidate relevant applications of technologic tools and innovations in this field. Decisions concerning which technology examples to highlight were reached through discussion and consensus-building among the team of experts. Two levels of impact are highlighted: the "me" domain, which primarily targets measurement and intervention activities aimed at individual-level behaviors and their surrounding environments; and the "we" domain, which generally focuses on aggregated data aimed at groups and larger population segments and locales. The paper ends with a set of challenges and opportunities for significantly advancing the field. Key areas for progress include data collection and expansion, managing technologic considerations, and working across sectors to maximize the population potential of behavioral health technologies. Copyright © 2015 American Journal of Preventive Medicine. Published by Elsevier Inc. All rights reserved.

Postharvest technology for developing countries: challenges and opportunities in research, outreach and advocacy.

PubMed

Kitinoja, Lisa; Saran, Sunil; Roy, Susanta K; Kader, Adel A

2011-03-15

This article discusses the needs and challenges of developing good, science-based, simple methods for postharvest handling that can be made available in developing countries. Some of the traditional challenges have been successfully met (i.e. identifying causes and sources of losses for key crops, identifying many potential postharvest technologies of practical use for reducing losses), but many challenges remain. These include the characterization of indigenous crops in terms of their unique postharvest physiology (e.g. respiration rate, susceptibility to water loss, chilling sensitivity, ethylene sensitivity), ascertaining the differences between handling recommendations made for well-known varieties and the needs of local varieties of crops, and determining cost effectiveness of scale-appropriate postharvest technologies in each locale and for each crop. Key issues include building capacity at the local level in postharvest science, university teaching and extension, and continued adaptive research efforts to match emerging postharvest technologies to local needs as these continue to change over time. Development of appropriate postharvest technology relies upon many disciplines that are relevant to the overall success of horticulture, i.e. plant biology, engineering, agricultural economics, food processing, nutrition, food safety, and environmental conservation. The expanding pool of new information derived from postharvest research and outreach efforts in these areas can lead in many directions which are likely to have an impact on relieving poverty in developing countries. Copyright © 2011 Society of Chemical Industry.

Evaluation of the Introduction of an e-Health Skills Component for Dietetics Students.

PubMed

Rollo, Megan E; Collins, Clare E; MacDonald-Wicks, Lesley

2017-11-01

Appropriate and effective use of technology within practice is a key competency outlined in Australian dietetics training standards. An e-health skills component (lecture and workshop) was introduced to undergraduate students enrolled in an Australian nutrition and dietetics program. The lecture orientated students to key e-health terms and concepts relating to telehealth and m-health technologies, while the workshop provided an opportunity to apply knowledge. The workshop consisted of four stations with activities relating to (1) orientation to telehealth equipment; (2) comparison of dietetic consultation components completed in person versus remotely via video call; (3) quality assessment of mobile apps; and (4) exploration of advantages and disadvantages, and the ethical, security, and privacy issues relating to use of e-health technologies in dietetic practice. Student experience of the training was evaluated via questionnaire. Forty-five students (62.2% aged ≤19-24 years, 86.7% female) completed the survey. Following the workshop, the level of understanding relating to each key e-health concept improved significantly (p < 0.001). The aspects relating to the impact and need for initial training and ongoing professional education to support the use of e-health technologies within dietetic practice were rated a high level of importance by most students (78-80%). The majority of students (93.3% to 97.8%) reported a positive experience at each of the four workshop stations, with "informative" the most common word selected to rate each station (37.8% to 44.4% of students across the four stations). The introduction of an e-health skills component resulted in an improved understanding of concepts for using these technologies. These findings provide preliminary support for integration of further e-health training within the dietetics program.

Product reliability and thin-film photovoltaics

NASA Astrophysics Data System (ADS)

Gaston, Ryan; Feist, Rebekah; Yeung, Simon; Hus, Mike; Bernius, Mark; Langlois, Marc; Bury, Scott; Granata, Jennifer; Quintana, Michael; Carlson, Carl; Sarakakis, Georgios; Ogden, Douglas; Mettas, Adamantios

2009-08-01

Despite significant growth in photovoltaics (PV) over the last few years, only approximately 1.07 billion kWhr of electricity is estimated to have been generated from PV in the US during 2008, or 0.27% of total electrical generation. PV market penetration is set for a paradigm shift, as fluctuating hydrocarbon prices and an acknowledgement of the environmental impacts associated with their use, combined with breakthrough new PV technologies, such as thin-film and BIPV, are driving the cost of energy generated with PV to parity or cost advantage versus more traditional forms of energy generation. In addition to reaching cost parity with grid supplied power, a key to the long-term success of PV as a viable energy alternative is the reliability of systems in the field. New technologies may or may not have the same failure modes as previous technologies. Reliability testing and product lifetime issues continue to be one of the key bottlenecks in the rapid commercialization of PV technologies today. In this paper, we highlight the critical need for moving away from relying on traditional qualification and safety tests as a measure of reliability and focus instead on designing for reliability and its integration into the product development process. A drive towards quantitative predictive accelerated testing is emphasized and an industrial collaboration model addressing reliability challenges is proposed.

A primer on brain-machine interfaces, concepts, and technology: a key element in the future of functional neurorestoration.

PubMed

Lee, Brian; Liu, Charles Y; Apuzzo, Michael L J

2013-01-01

Conventionally, the practice of neurosurgery has been characterized by the removal of pathology, congenital or acquired. The emerging complement to the removal of pathology is surgery for the specific purpose of restoration of function. Advents in neuroscience, technology, and the understanding of neural circuitry are creating opportunities to intervene in disease processes in a reparative manner, thereby advancing toward the long-sought-after concept of neurorestoration. Approaching the issue of neurorestoration from a biomedical engineering perspective is the rapidly growing arena of implantable devices. Implantable devices are becoming more common in medicine and are making significant advancements to improve a patient's functional outcome. Devices such as deep brain stimulators, vagus nerve stimulators, and spinal cord stimulators are now becoming more commonplace in neurosurgery as we utilize our understanding of the nervous system to interpret neural activity and restore function. One of the most exciting prospects in neurosurgery is the technologically driven field of brain-machine interface, also known as brain-computer interface, or neuroprosthetics. The successful development of this technology will have far-reaching implications for patients suffering from a great number of diseases, including but not limited to spinal cord injury, paralysis, stroke, or loss of limb. This article provides an overview of the issues related to neurorestoration using implantable devices with a specific focus on brain-machine interface technology. Copyright © 2013 Elsevier Inc. All rights reserved.

Global information infrastructure.

PubMed

Lindberg, D A

1994-01-01

The High Performance Computing and Communications Program (HPCC) is a multiagency federal initiative under the leadership of the White House Office of Science and Technology Policy, established by the High Performance Computing Act of 1991. It has been assigned a critical role in supporting the international collaboration essential to science and to health care. Goals of the HPCC are to extend USA leadership in high performance computing and networking technologies; to improve technology transfer for economic competitiveness, education, and national security; and to provide a key part of the foundation for the National Information Infrastructure. The first component of the National Institutes of Health to participate in the HPCC, the National Library of Medicine (NLM), recently issued a solicitation for proposals to address a range of issues, from privacy to 'testbed' networks, 'virtual reality,' and more. These efforts will build upon the NLM's extensive outreach program and other initiatives, including the Unified Medical Language System (UMLS), MEDLARS, and Grateful Med. New Internet search tools are emerging, such as Gopher and 'Knowbots'. Medicine will succeed in developing future intelligent agents to assist in utilizing computer networks. Our ability to serve patients is so often restricted by lack of information and knowledge at the time and place of medical decision-making. The new technologies, properly employed, will also greatly enhance our ability to serve the patient.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mundaca, Luis; Neij, Lena; Worrell, Ernst

The growing complexities of energy systems, environmental problems and technology markets are driving and testing most energy-economy models to their limits. To further advance bottom-up models from a multidisciplinary energy efficiency policy evaluation perspective, we review and critically analyse bottom-up energy-economy models and corresponding evaluation studies on energy efficiency policies to induce technological change. We use the household sector as a case study. Our analysis focuses on decision frameworks for technology choice, type of evaluation being carried out, treatment of market and behavioural failures, evaluated policy instruments, and key determinants used to mimic policy instruments. Although the review confirms criticismmore » related to energy-economy models (e.g. unrealistic representation of decision-making by consumers when choosing technologies), they provide valuable guidance for policy evaluation related to energy efficiency. Different areas to further advance models remain open, particularly related to modelling issues, techno-economic and environmental aspects, behavioural determinants, and policy considerations.« less

Introduction to special issue: moving forward in pediatric neuropsychology.

PubMed

Daly, Brian P; Giovannetti, Tania; Zabel, T Andrew; Chute, Douglas L

2011-08-01

This special issue of The Clinical Neuropsychologist focuses on advances in the emerging subspecialty of pediatric neuropsychology. The national and international contributions in this issue cover a range of key clinical, research, training, and professional issues specific to pediatric neuropsychology. The genesis for this project developed out of a series of talks at the Philadelphia Pediatric Neuropsychology Symposium in 2010, hosted by the Stein Family Fellow, the Department of Psychology of the College of Arts and Sciences at Drexel University, and the Philadelphia Neuropsychology Society. Articles that explore clinical practice issue focus on the assessment of special medical populations with congenital and/or acquired central nervous system insults. Research articles investigate the core features of developmental conditions, the use of technology in neuropsychological research studies, and large sample size genomic, neuropsychological, and imaging studies of under-represented populations. The final series of articles examine new considerations in training, advocacy, and subspecialty board certification that have emerged in pediatric neuropsychology. This introductory article provides an overview of the articles in this special issue and concluding thoughts about the future of pediatric neuropsychology.

A Review of the Relationships among the Key Determinants Affecting the Mental Health Disorders of the People in Greater Mekong Subregion Countries

PubMed Central

Nget, Manndy; Muijeen, Kasorn

2017-01-01

Background: ASEAN integration aims to transform the GMS into a single market with free flows of products, services, and skilled labor, as well as investment openness, which will ultimately force regional economic growth. Therefore, this integration is likely to bring about a big change to this area in the new era; it can subsequently cause many problems as well, including mental health issues of the people in this region. The characteristic differences among the GMS member countries in terms of trade and investment, social and cultural values, medical information and technology, and the living and working environment have become major problems affecting mental health disorders, which are usually identified as depression, stress, and substance abuse. Methods: This review paper is a literature review of the relationship of the determinants affecting GMS mental disorders conducted using the following strategies: 1) collecting data from previous qualitative and quantitative research studies, comparatively analyzing the literature, articles, published papers, and reports relevant to the existing policies on economic, environmental, and healthcare issues obtained from the GMS; and 2) exchanging information from the institutions involved, including reports and papers regarding the determinants affecting mental health disorders of the people in the GMS, which were used to generate the synthesis of the existing knowledge of the mental health and to provide recommendation programs for the GMS people. Results: Based on the reviewed literature there are four key factors affecting mental health, especially mental health in GMS populations: 1) the living and work environments; 2) trade and investment; 3) technology and medical information; and 4) social and cultural values. The study found that the increasing number of mental health disorders is a big burden for national healthcare spending. Financial issues have become a major key to the wide prevalence of mental disorders in the GMS. Health issues related to mental health disorders are also caused by the environment and other related factors and therefore a stable and a well-balanced environment is an indicator of healthy mental status. In addition, the environment is a way to pursue both physical and mental health because green spaces serve as a mood freshener and can alleviate anxiety, stress, and depression. Conclusion: Globalization and urbanization should follow sustainable development instructions and concerns about the population’s health, especially regarding mental health. These key determinants affect the people’s life, especially in terms of mental health thus leading to mental health disorders. PMID:29527146

A Review of the Relationships among the Key Determinants Affecting the Mental Health Disorders of the People in Greater Mekong Subregion Countries.

PubMed

Nget, Manndy; Muijeen, Kasorn

2017-12-01

ASEAN integration aims to transform the GMS into a single market with free flows of products, services, and skilled labor, as well as investment openness, which will ultimately force regional economic growth. Therefore, this integration is likely to bring about a big change to this area in the new era; it can subsequently cause many problems as well, including mental health issues of the people in this region. The characteristic differences among the GMS member countries in terms of trade and investment, so-cial and cultural values, medical information and technology, and the living and working environment have become major problems affecting mental health disorders, which are usually identified as depression, stress, and substance abuse. This review paper is a literature review of the relationship of the determinants affecting GMS mental disorders conducted using the following strategies: 1) collecting data from previous qualitative and quantitative research studies, com-paratively analyzing the literature, articles, published papers, and reports relevant to the existing policies on economic, environmental, and healthcare issues obtained from the GMS; and 2) exchanging information from the institutions involved, including reports and papers regarding the determinants affecting mental health disorders of the people in the GMS, which were used to generate the synthesis of the existing knowledge of the mental health and to provide recommenda-tion programs for the GMS people. Based on the reviewed literature there are four key factors affecting mental health, especially mental health in GMS populations: 1) the living and work environments; 2) trade and investment; 3) technology and medical information; and 4) social and cultural values. The study found that the increasing number of mental health dis-orders is a big burden for national healthcare spending. Financial issues have become a major key to the wide prevalence of mental disorders in the GMS. Health issues related to mental health disorders are also caused by the environment and other related factors and therefore a stable and a well-balanced environment is an indicator of healthy mental status. In addition, the environment is a way to pursue both physical and mental health because green spaces serve as a mood freshener and can al-leviate anxiety, stress, and depression. Globalization and urbanization should follow sustainable development instructions and concerns about the population's health, especially regarding mental health. These key determinants affect the people's life, especially in terms of mental health thus leading to mental health disorders.

Global trade and assisted reproductive technologies: regulatory challenges in international surrogacy.

PubMed

Nelson, Erin

2013-01-01

International surrogacy is an increasingly common phenomenon and an important global health challenge. Legal rules are a key consideration for the participants in international surrogacy arrangements. In some cases the law can help to resolve the complex issues that arise in this context, but it is important to consider the role played by law in contributing to the complex conflicts that such arrangements can generate. © 2013 American Society of Law, Medicine & Ethics, Inc.

DOE/NASA Automotive Stirling Engine Project Overview 83

NASA Technical Reports Server (NTRS)

Beremand, D. G.

1983-01-01

An overview of the DOE/NASA Automotive Stirling Engine Project is presented. The background and objectives of the project are reviewed. Project activities are described and technical progress and status are presented and assessed. Prospects for achieving the objective 30 percent fuel economy improvement are considered good. The key remaining technology issues are primarily related to life, reliability and cost, such as piston rod seals, and low cost heat exchanges. Previously announced in STAR as N83-27924

Passengers, Crew, Life Support, and Insurance Considerations

NASA Technical Reports Server (NTRS)

ONeil, Daniel A.; Young, Lawrence R.

1999-01-01

This section describes the key issues, barriers, opportunities, and potential trip packages related to the needs and expectations of initial space adventure travelers. A variety of ideas to overcome barriers is presented that address financial, psychological, and sociological problems expected to be encountered in establishing a general PST and tourism business. Tour package descriptions range from near-term surface training facilities to far-term lunar ones. Recommendations include requirements pertaining to human factors in design and needed technology.

Water security - Nation state and international security implications

USGS Publications Warehouse

Tindall, James A.; Andrew A. Campbell,

2009-01-01

A terrorist attack such as poisoning and sabotage of the national water supply and water-quality infrastructure of the continental United States or any country, could disrupt the delivery of vital human services, threaten both public health and the environment, potentially cause mass casualties and pose grave public concern for homeland security. Most significantly, an attack on water resources would weaken social cohesion and trust in government. A threat to continuity of services is a potential threat to continuity of government since both are necessary for continuity of operations. Water infrastructure is difficult to protect, as it extends over vast areas across the U.S. and for which ownership is overwhelmingly nonfederal (approximately 85 percent). Since the 9111 attacks, federal dam operators and water and wastewater utilities have established counter measures. Similar measures have been taken in countries around the world. These include enhanced physical security, improved coordination between corporate ownership, Department of Homeland Security, and local law enforcement, and research into risk assessment and vulnerability analysis to ensure greater system safety. A key issue is the proportionate additional resources directed at public and private sector specific priorities. Agencies that have the scientific and technological ability to leverage resources, exploit integrated science approaches, focus on interdisciplinary practices, utilize informatics expertise and employ a wide use of evolving technologies should play a key role in water security and related issues.

Dynamic assessment of urban economy-environment-energy system using system dynamics model: A case study in Beijing.

PubMed

Wu, Desheng; Ning, Shuang

2018-07-01

Economic development, accompanying with environmental damage and energy depletion, becomes essential nowadays. There is a complicated and comprehensive interaction between economics, environment and energy. Understanding the operating mechanism of Energy-Environment-Economy model (3E) and its key factors is the inherent part in dealing with the issue. In this paper, we combine System Dynamics model and Geographic Information System to analyze the energy-environment-economy (3E) system both temporally and spatially, which explicitly explore the interaction of economics, energy, and environment and effects of the key influencing factors. Beijing is selected as a case study to verify our SD-GIS model. Alternative scenarios, e.g., current, technology, energy and environment scenarios are explored and compared. Simulation results shows that, current scenario is not sustainable; technology scenario is applicable to economic growth; environment scenario maintains a balanced path of development for long term stability. Policy-making insights are given based on our results and analysis. Copyright © 2018 Elsevier Inc. All rights reserved.

Advances and challenges in sustainable tourism toward a green economy.

PubMed

Pan, Shu-Yuan; Gao, Mengyao; Kim, Hyunook; Shah, Kinjal J; Pei, Si-Lu; Chiang, Pen-Chi

2018-09-01

This paper provides an overview of the interrelationships between tourism and sustainability from a cross-disciplinary perspective. The current challenges and barriers in the tourism sustainability, such as high energy use, extensive water consumption and habitat destruction, are first reviewed. Then the key cross-disciplinary elements in sustainable tourism, including green energy, green transportation, green buildings, green infrastructure, green agriculture and smart technologies, are discussed. To overcome the challenges and barriers, a few implementation strategies on achieving sustainable tourism from the aspects of policy/regulation, institution, finance, technology and culture are proposed, along with the framework and details of a key performance indicator system. Finally, prospects of the potential for tourism to contribute to the transformative changes, e.g., a green economy system, are illustrated. This paper shine a light on issues of importance within sustainable tourism and encourage researchers from different disciplines in investigating the inter-relationships among community/culture, environment/ecology, and energy/water/food more broadly. Copyright © 2018 Elsevier B.V. All rights reserved.

Modeling of Steady-state Scenarios for the Fusion Nuclear Science Facility, Advanced Tokamak Approach

NASA Astrophysics Data System (ADS)

Garofalo, A. M.; Chan, V. S.; Prater, R.; Smith, S. P.; St. John, H. E.; Meneghini, O.

2013-10-01

A Fusion National Science Facility (FNSF) would complement ITER in addressing the community identified science and technology gaps to a commercially attractive DEMO, including breeding tritium and completing the fuel cycle, qualifying nuclear materials for high fluence, developing suitable materials for the plasma-boundary interface, and demonstrating power extraction. Steady-state plasma operation is highly desirable to address the requirements for fusion nuclear technology testing [1]. The Advanced Tokamak (AT) is a strong candidate for an FNSF as a consequence of its mature physics base, capability to address the key issues with a more compact device, and the direct relevance to an attractive target power plant. Key features of AT are fully noninductive current drive, strong plasma cross section shaping, internal profiles consistent with high bootstrap fraction, and operation at high beta, typically above the free boundary limit, βN > 3 . Work supported by GA IR&D funding, DE-FC02-04ER54698, and DE-FG02-95ER43309.

Considerations for sustainable influenza vaccine production in developing countries.

PubMed

Nannei, Claudia; Chadwick, Christopher; Fatima, Hiba; Goldin, Shoshanna; Grubo, Myriam; Ganim, Alexandra

2016-10-26

Through its Global Action Plan for Influenza Vaccines (GAP), the World Health Organization (WHO) in collaboration with the United States Department of Health and Human Services has produced a checklist to support policy-makers and influenza vaccine manufacturers in identifying key technological, political, financial, and logistical issues affecting the sustainability of influenza vaccine production. This checklist highlights actions in five key areas that are beneficial for establishing successful local vaccine manufacturing. These five areas comprise: (1) the policy environment and health-care systems; (2) surveillance systems and influenza evidence; (3) product development and manufacturing; (4) product approval and regulation; and (5) communication to support influenza vaccination. Incorporating the checklist into national vaccine production programmes has identified the policy gaps and next steps for countries involved in GAP's Technology Transfer Initiative. Lessons learnt from country experiences provide context and insight that complement the checklist's goal of simplifying the complexities of influenza prevention, preparedness, and vaccine manufacturing. Copyright © 2016 The Authors. Published by Elsevier Ltd.. All rights reserved.

A survey of simultaneous localization and mapping on unstructured lunar complex environment

NASA Astrophysics Data System (ADS)

Wang, Yiqiao; Zhang, Wei; An, Pei

2017-10-01

Simultaneous localization and mapping (SLAM) technology is the key to realizing lunar rover's intelligent perception and autonomous navigation. It embodies the autonomous ability of mobile robot, and has attracted plenty of concerns of researchers in the past thirty years. Visual sensors are meaningful to SLAM research because they can provide a wealth of information. Visual SLAM uses merely images as external information to estimate the location of the robot and construct the environment map. Nowadays, SLAM technology still has problems when applied in large-scale, unstructured and complex environment. Based on the latest technology in the field of visual SLAM, this paper investigates and summarizes the SLAM technology using in the unstructured complex environment of lunar surface. In particular, we focus on summarizing and comparing the detection and matching of features of SIFT, SURF and ORB, in the meanwhile discussing their advantages and disadvantages. We have analyzed the three main methods: SLAM Based on Extended Kalman Filter, SLAM Based on Particle Filter and SLAM Based on Graph Optimization (EKF-SLAM, PF-SLAM and Graph-based SLAM). Finally, this article summarizes and discusses the key scientific and technical difficulties in the lunar context that Visual SLAM faces. At the same time, we have explored the frontier issues such as multi-sensor fusion SLAM and multi-robot cooperative SLAM technology. We also predict and prospect the development trend of lunar rover SLAM technology, and put forward some ideas of further research.

Reliable Freestanding Position-Based Routing in Highway Scenarios

PubMed Central

Galaviz-Mosqueda, Gabriel A.; Aquino-Santos, Raúl; Villarreal-Reyes, Salvador; Rivera-Rodríguez, Raúl; Villaseñor-González, Luis; Edwards, Arthur

2012-01-01

Vehicular Ad Hoc Networks (VANETs) are considered by car manufacturers and the research community as the enabling technology to radically improve the safety, efficiency and comfort of everyday driving. However, before VANET technology can fulfill all its expected potential, several difficulties must be addressed. One key issue arising when working with VANETs is the complexity of the networking protocols compared to those used by traditional infrastructure networks. Therefore, proper design of the routing strategy becomes a main issue for the effective deployment of VANETs. In this paper, a reliable freestanding position-based routing algorithm (FPBR) for highway scenarios is proposed. For this scenario, several important issues such as the high mobility of vehicles and the propagation conditions may affect the performance of the routing strategy. These constraints have only been partially addressed in previous proposals. In contrast, the design approach used for developing FPBR considered the constraints imposed by a highway scenario and implements mechanisms to overcome them. FPBR performance is compared to one of the leading protocols for highway scenarios. Performance metrics show that FPBR yields similar results when considering freespace propagation conditions, and outperforms the leading protocol when considering a realistic highway path loss model. PMID:23202159

Reliable freestanding position-based routing in highway scenarios.

PubMed

Galaviz-Mosqueda, Gabriel A; Aquino-Santos, Raúl; Villarreal-Reyes, Salvador; Rivera-Rodríguez, Raúl; Villaseñor-González, Luis; Edwards, Arthur

2012-10-24

Vehicular Ad Hoc Networks (VANETs) are considered by car manufacturers and the research community as the enabling technology to radically improve the safety, efficiency and comfort of everyday driving. However, before VANET technology can fulfill all its expected potential, several difficulties must be addressed. One key issue arising when working with VANETs is the complexity of the networking protocols compared to those used by traditional infrastructure networks. Therefore, proper design of the routing strategy becomes a main issue for the effective deployment of VANETs. In this paper, a reliable freestanding position-based routing algorithm (FPBR) for highway scenarios is proposed. For this scenario, several important issues such as the high mobility of vehicles and the propagation conditions may affect the performance of the routing strategy. These constraints have only been partially addressed in previous proposals. In contrast, the design approach used for developing FPBR considered the constraints imposed by a highway scenario and implements mechanisms to overcome them. FPBR performance is compared to one of the leading protocols for highway scenarios. Performance metrics show that FPBR yields similar results when considering freespace propagation conditions, and outperforms the leading protocol when considering a realistic highway path loss model.

Teamwork Reasoning and Multi-Satellite Missions

NASA Technical Reports Server (NTRS)

Marsella, Stacy C.; Plaunt, Christian (Technical Monitor)

2002-01-01

NASA is rapidly moving towards the use of spatially distributed multiple satellites operating in near Earth orbit and Deep Space. Effective operation of such multi-satellite constellations raises many key research issues. In particular, the satellites will be required to cooperate with each other as a team that must achieve common objectives with a high degree of autonomy from ground based operations. The multi-agent research community has made considerable progress in investigating the challenges of realizing such teamwork. In this report, we discuss some of the teamwork issues that will be faced by multi-satellite operations. The basis of the discussion is a particular proposed mission, the Magnetospheric MultiScale mission to explore Earth's magnetosphere. We describe this mission and then consider how multi-agent technologies might be applied in the design and operation of these missions. We consider the potential benefits of these technologies as well as the research challenges that will be raised in applying them to NASA multi-satellite missions. We conclude with some recommendations for future work.

Superconducting rebalance acceleration and rate sensor

NASA Technical Reports Server (NTRS)

Torti, R.; Gerver, M.; Gondhalekar, V.; Maxwell, B.

1994-01-01

The goal of this program is the development of a high precision multisensor based on a high T(sub c) superconducting proof mass. The design of a prototype is currently underway. Key technical issues appear resolvable. High temperature superconductors have complicated, hysteretic flux dynamics but the forces on them can be linearly controlled for small displacements. Current data suggests that the forces on the superconductors decay over a short time frame and then stabilize, though very long term data is not available. The hysteretic force characteristics are substantial for large scale excursions, but do not appear to be an issue for the very small displacements required in this device. Sufficient forces can be exerted for non-contact suspension of a centimeter sized proof mass in a vacuum sealed nitrogen jacket cryostat. High frequency capacitive sensing using stripline technology will yield adequate position resolution for 0.1 micro-g measurements at 100 Hz. Overall, a reasonable cost, but very high accuracy, system is feasible with this technology.

Superconducting rebalance acceleration and rate sensor

NASA Astrophysics Data System (ADS)

Torti, R.; Gerver, M.; Gondhalekar, V.; Maxwell, B.

1994-05-01

The goal of this program is the development of a high precision multisensor based on a high T(sub c) superconducting proof mass. The design of a prototype is currently underway. Key technical issues appear resolvable. High temperature superconductors have complicated, hysteretic flux dynamics but the forces on them can be linearly controlled for small displacements. Current data suggests that the forces on the superconductors decay over a short time frame and then stabilize, though very long term data is not available. The hysteretic force characteristics are substantial for large scale excursions, but do not appear to be an issue for the very small displacements required in this device. Sufficient forces can be exerted for non-contact suspension of a centimeter sized proof mass in a vacuum sealed nitrogen jacket cryostat. High frequency capacitive sensing using stripline technology will yield adequate position resolution for 0.1 micro-g measurements at 100 Hz. Overall, a reasonable cost, but very high accuracy, system is feasible with this technology.

Real-Time Monitoring of Critical Care Analytes in the Bloodstream with Chemical Sensors: Progress and Challenges.

PubMed

Frost, Megan C; Meyerhoff, Mark E

2015-01-01

We review approaches and challenges in developing chemical sensor-based methods to accurately and continuously monitor levels of key analytes in blood related directly to the status of critically ill hospitalized patients. Electrochemical and optical sensor-based technologies have been pursued to measure important critical care species in blood [i.e., oxygen, carbon dioxide, pH, electrolytes (K(+), Na(+), Cl(-), etc.), glucose, and lactate] in real-time or near real-time. The two main configurations examined to date for achieving this goal have been intravascular catheter sensors and patient attached ex vivo sensors with intermittent blood sampling via an attached indwelling catheter. We discuss the status of these configurations and the main issues affecting the accuracy of the measurements, including cell adhesion and thrombus formation on the surface of the sensors, sensor drift, sensor selectivity, etc. Recent approaches to mitigate these nagging performance issues that have prevented these technologies from clinical use are also discussed.

NASA's UAS NAS Access Project

NASA Technical Reports Server (NTRS)

Johnson, Charles W.

2011-01-01

The vision of the Unmanned Aircraft System (UAS) Integration in the National Airspace System (NAS) Project is "A global transportation system which allows routine access for all classes of UAS." The goal of the UAS Integration in the NAS Project is to "contribute capabilities that reduce technical barriers related to the safety and operational challenges associated with enabling routine UAS access to the NAS." This goal will be accomplished through a two-phased approach based on development of system-level integration of key concepts, technologies and/or procedures, and demonstrations of integrated capabilities in an operationally relevant environment. Phase 1 will take place the first two years of the Project and Phase 2 will take place the following three years. The Phase 1 and 2 technical objectives are: Phase 1: Developing a gap analysis between current state of the art and the Next Generation Air Transportation System (NextGen) UAS Concept of Operations . Validating the key technical areas identified by this Project . Conducting initial modeling, simulation, and flight testing activities . Completing Sub-project Phase 1 deliverables (spectrum requirements, comparative analysis of certification methodologies, etc.) and continue Phase 2 preparation (infrastructure, tools, etc.) Phase 2: Providing regulators with a methodology for developing airworthiness requirements for UAS, and data to support development of certifications standards and regulatory guidance . Providing systems-level, integrated testing of concepts and/or capabilities that address barriers to routine access to the NAS. Through simulation and flight testing, address issues including separation assurance, communications requirements, and human systems integration in operationally relevant environments. The UAS in the NAS Project will demonstrate solutions in specific technology areas, which will address operational/safety issues related to UAS access to the NAS. Since the resource allocation for this Project is limited ($150M over the five years), the focus is on reducing the technical barriers where NASA has unique capabilities. As a result, technical areas, such as Sense and Avoid (SAA) and beyond line of sight command and control will not be addressed. While these are critical barriers to UAS access, currently, there is a great deal of global effort being exercised to address these challenge areas. Instead, specific technology development in areas where there is certainty that NASA can advance the research to high technology readiness levels will be the Project's focus. Specific sub-projects include Separation Assurance, Human Systems Integration, Communications, Certification, and Integrated Test and Evaluation. Each sub-project will transfer technologies to relevant key stakeholders and decision makers through research transition teams, technology forums, or through other analogous means.

Mars transit vehicle thermal protection system: Issues, options, and trades

NASA Technical Reports Server (NTRS)

Brown, Norman

1986-01-01

A Mars mission is characterized by different mission phases. The thermal control of cryogenic propellant in a propulsive vehicle must withstand the different mission environments. Long term cryogenic storage may be achieved by passive or active systems. Passive cryo boiloff management features will include multilayer insulation, vapor cooled shield, and low conductance structural supports and penetrations. Active boiloff management incorporates the use of a refrigeration system. Key system trade areas include active verses passive system boiloff management (with respect to safety, reliability, and cost) and propellant tank insulation optimizations. Technology requirements include refrigeration technology advancements, insulation performance during long exposure, and cryogenic fluid transfer system for mission vehicle propellant tanking during vehicle buildip in LEO.

First NASA Workshop on Wiring for Space Applications

NASA Technical Reports Server (NTRS)

Hammond, Ahmad (Compiler); Stavnes, Mark W. (Compiler)

1994-01-01

This document contains the proceedings of the First NASA Workshop on Wiring for Space Applications held at NASA Lewis Research Center in Cleveland, OH, July 23-24, 1991. The workshop was sponsored by NASA Headquarters Code QE Office of Safety and Mission Quality, Technical Standards Division and hosted by the NASA Lewis Research Center, Power Technology Division, Electrical Components and Systems Branch. The workshop addressed key technology issues in the field of electrical power wiring for space applications. Speakers from government, industry and academia presented and discussed topics on arc tracking phenomena, wiring applications and requirements, and new candidate insulation materials and constructions. Presentation materials provided by the various speakers are included in this document.

Multijunction cells for concentrators: Technology prospects

NASA Technical Reports Server (NTRS)

Ferber, R. R. (Compiler); Costogue, E. N. (Compiler); Shimada, K. (Compiler)

1984-01-01

Development of high-efficiency multijunction solar cells for concentrator applications is a key step in achieving the goals of the U.S. Department of Energy National Photovoltaics Program. This report summarizes findings of an issue study conducted by the Jet Propulsion Laboratory Photovoltaic Analysis and Integration Center, with the assistance of the Solar Energy Research Institute and Sandia National laboratoies, which surveyed multijunction cell research for concentrators undertaken by federal agencies and by private industry. The team evaluated the potentials of research activities sponsored by DOE and by corporate funding to achieve projected high-efficiency goals and developed summary statements regarding industry expectations. Recommendations are made for the direction of future work to address specific unresolved aspects of multijunction cell technology.

An Improvement of Robust and Efficient Biometrics Based Password Authentication Scheme for Telecare Medicine Information Systems Using Extended Chaotic Maps.

PubMed

Moon, Jongho; Choi, Younsung; Kim, Jiye; Won, Dongho

2016-03-01

Recently, numerous extended chaotic map-based password authentication schemes that employ smart card technology were proposed for Telecare Medical Information Systems (TMISs). In 2015, Lu et al. used Li et al.'s scheme as a basis to propose a password authentication scheme for TMISs that is based on biometrics and smart card technology and employs extended chaotic maps. Lu et al. demonstrated that Li et al.'s scheme comprises some weaknesses such as those regarding a violation of the session-key security, a vulnerability to the user impersonation attack, and a lack of local verification. In this paper, however, we show that Lu et al.'s scheme is still insecure with respect to issues such as a violation of the session-key security, and that it is vulnerable to both the outsider attack and the impersonation attack. To overcome these drawbacks, we retain the useful properties of Lu et al.'s scheme to propose a new password authentication scheme that is based on smart card technology and requires the use of chaotic maps. Then, we show that our proposed scheme is more secure and efficient and supports security properties.

Effective implementation of health information technologies in U.S. hospitals.

PubMed

Khatri, Naresh; Gupta, Vishal

2016-01-01

Two issues pertaining to the effective implementation of health information technologies (HITs) in U.S. hospitals are examined. First, which information technology (IT) system is better--a homegrown or an outsourced one? In the second issue, the critical role of in-house IT expertise/capabilities in the effective implementation of HITs is investigated. The data on type of HIT system and IT expertise/capabilities were collected from a national sample of senior executives of U.S. hospitals. The data on quality of patient care were gathered from the Hospital Compare Web site. The quality of patient care was significantly higher in hospitals deploying a homegrown HIT system than hospitals deploying an outsourced HIT system. Furthermore, the professional competence and compelling vision of the chief information officer was found to be a major driver of another key IT capability of hospitals-professionalism of IT staff. The positive relationship of professionalism of IT staff with quality of patient care was mediated by proactive employee behavior. A homegrown HIT system achieves better quality of patient care than an outsourced one. The chief information officer's IT vision and the professional expertise and professionalism of IT staff are important IT capabilities in U.S. hospitals.

Modeling and simulation: A key to future defense technology

NASA Technical Reports Server (NTRS)

Muccio, Anthony B.

1993-01-01

The purpose of this paper is to express the rationale for continued technological and scientific development of the modeling and simulation process for the defense industry. The defense industry, along with a variety of other industries, is currently being forced into making sacrifices in response to the current economic hardships. These sacrifices, which may not compromise the safety of our nation, nor jeopardize our current standing as the world peace officer, must be concentrated in areas which will withstand the needs of the changing world. Therefore, the need for cost effective alternatives of defense issues must be examined. This paper provides support that the modeling and simulation process is an economically feasible process which will ensure our nation's safety as well as provide and keep up with the future technological developments and demands required by the defense industry. The outline of this paper is as follows: introduction, which defines and describes the modeling and simulation process; discussion, which details the purpose and benefits of modeling and simulation and provides specific examples of how the process has been successful; and conclusion, which summarizes the specifics of modeling and simulation of defense issues and lends the support for its continued use in the defense arena.

Regulatory framework in assisted reproductive technologies, relevance and main issues.

PubMed

Merlet, Françoise

2009-01-01

Assisted reproductive technologies (ART) have changed life for the past 25 years and many ethical and social issues have emerged following this new method of conception. In order to protect individuals against scientific and ethical abuses without inhibiting scientific progress, a specific legal framework is necessary. The first French law on Bioethics was voted after an extensive debate in 1994 then reviewed in 2004. This review previously scheduled every five years is currently being discussed. Legal provisions applying to ART are part of a large framework including the protection of the patients' rights and biomedical research. The key principles consist of respect for human life and ban on commercial practices of human body parts, eugenic practices and any kind of cloning. These key principles apply to ART. Donation is anonymous and free. Created in 2004, the Agence de la biomédecine is a government agency and one of the main tools of the French regulations. The missions focus on improving the quality and the safety of the management of ART. Evaluation of activities is available to all from the annual report. The agency represents the French competent authority for medical and scientific aspects of ART. Substantial differences in European legislations exist from the open-up "laissez faire" to the most restrictive one. As a consequence a large reproductive tourism has developed particularly for egg donation or surrogacy. The medical and ethical conditions of management of patients and donors represent the main critical points. In order to avoid ethical abuses, homogenization regarding the key principles is necessary in Europe. It is an opportunity to reassert that human body parts should not be a source of financial gain.

A Survey Of Architectural Approaches for Managing Embedded DRAM and Non-volatile On-chip Caches

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mittal, Sparsh; Vetter, Jeffrey S; Li, Dong

Recent trends of CMOS scaling and increasing number of on-chip cores have led to a large increase in the size of on-chip caches. Since SRAM has low density and consumes large amount of leakage power, its use in designing on-chip caches has become more challenging. To address this issue, researchers are exploring the use of several emerging memory technologies, such as embedded DRAM, spin transfer torque RAM, resistive RAM, phase change RAM and domain wall memory. In this paper, we survey the architectural approaches proposed for designing memory systems and, specifically, caches with these emerging memory technologies. To highlight theirmore » similarities and differences, we present a classification of these technologies and architectural approaches based on their key characteristics. We also briefly summarize the challenges in using these technologies for architecting caches. We believe that this survey will help the readers gain insights into the emerging memory device technologies, and their potential use in designing future computing systems.« less

Advanced Propfan Engine Technology (APET) definition study, single and counter-rotation gearbox/pitch change mechanism design

NASA Technical Reports Server (NTRS)

Anderson, R. D.

1985-01-01

Single-rotation propfan-powered regional transport aircraft were studied to identify key technology development issues and programs. The need for improved thrust specific fuel consumption to reduce fuel burned and aircraft direct operating cost is the dominant factor. Typical cycle trends for minimizing fuel consumption are reviewed, and two 10,000 shp class engine configurations for propfan propulsion systems for the 1990's are presented. Recommended engine configurations are both three-spool design with dual spool compressors and free power turbines. The benefits of these new propulsion system concepts were evaluated using an advanced airframe, and results are compared for single-rotation propfan and turbofan advanced technology propulsion systems. The single-rotation gearbox is compared to a similar design with current technology to establish the benefits of the advanced gearbox technology. The conceptual design of the advanced pitch change mechanism identified a high pressure hydraulic system that is superior to the other contenders and completely external to the gearboxes.

Health care technology assessment

NASA Astrophysics Data System (ADS)

Goodman, Clifford

1994-12-01

The role of technology in the cost of health care is a primary issue in current debates concerning national health care reform. The broad scope of studies for understanding technological impacts is known as technology assessment. Technology policy makers can improve their decision making by becoming more aware, and taking greater advantage, of key trends in health care technology assessment (HCTA). HCTA is the systematic evaluation of the properties, impacts, and other attributes of health care technologies, including: technical performance; clinical safety and efficacy/effectiveness; cost-effectiveness and other economic attributes; appropriate circumstances/indications for use; and social, legal, ethical, and political impacts. The main purpose of HCTA is to inform technology-related policy making in health care. Among the important trends in HCTA are: (1) proliferation of HCTA groups in the public and private sectors; (2) higher standards for scientific evidence concerning technologies; (3) methodological development in cost analyses, health-related quality of life measurement, and consolidation of available scientific evidence (e.g., meta-analysis); (4) emphasis on improved data on how well technologies work in routine practice and for traditionally under-represented patient groups; (5) development of priority-setting methods; (6) greater reliance on medical informatics to support and disseminate HCTA findings.

NASA/industry advanced turboprop technology program

NASA Technical Reports Server (NTRS)

Ziemianski, Joseph A.; Whitlow, John B., Jr.

1988-01-01

Experimental and analytical effort shows that use of advanced turboprop (propfan) propulsion instead of conventional turbofans in the older narrow-body airline fleet could reduce fuel consumption for this type of aircraft by up to 50 percent. The NASA Advanced Turboprop (ATP) program was formulated to address the key technologies required for these thin, swept-blade propeller concepts. A NASA, industry, and university team was assembled to develop and validate applicable design codes and prove by ground and flight test the viability of these propeller concepts. Some of the history of the ATP project, an overview of some of the issues, and a summary of the technology developed to make advanced propellers viable in the high-subsonic cruise speed application are presented. The ATP program was awarded the prestigious Robert J. Collier Trophy for the greatest achievement in aeronautics and astronautics in America in 1987.

Unknown Safety and Efficacy of Smartphone Bolus Calculator Apps Puts Patients at Risk for Severe Adverse Outcomes.

PubMed

Hirsch, Irl B; Parkin, Christopher G

2016-07-01

Manual calculation of bolus insulin dosages can be challenging for individuals treated with multiple daily insulin injections (MDI) therapy. Automated bolus calculator capability has recently been made available via enhanced blood glucose meters and smartphone apps. Use of this technology has been shown to improve glycemic control and reduce glycemic variability without changing hypoglycemia; however, the clinical utility of app-based bolus calculators has not been demonstrated. Moreover, recent evidence challenges the safety and efficacy of these smartphone apps. Although the ability to automatically calculate bolus insulin dosages addresses a critical need of MDI-treated individuals, this technology raises concerns about efficacy of treatment and the protection of patient safety. This article discusses key issues and considerations associated with automated bolus calculator use. © 2016 Diabetes Technology Society.

Innovative Seismological Techniques for Investigating the Interior Structure of Venus

NASA Astrophysics Data System (ADS)

Stevenson, D. J.; Cutts, J. A.; Mimoun, D.

2014-12-01

The formation, evolution and structure of Venus remain a mystery more than fifty years after the first visit by a robotic spacecraft. Radar images have revealed a surface that is much younger than those of the Moon, Mercury and Mars as well as a variety of enigmatic volcanic and tectonic features quite unlike those generated by plate tectonics on Earth. To understand how Venus works as a planet it is necessary to probe the interior of Venus. To accomplish this seismology must play a key role. Conventional seismology employs sensors in contact with the planetary surface but for Venus theses sensors must tolerate the Venus environment (460oC and 90 bars) for up to a year. The dense atmosphere of Venus, which efficiently couples seismic energy into the atmosphere as infrasonic waves, enables an alternative: detection of infrasonic waves in the upper atmosphere using either high altitude balloons or orbiting spacecraft. In June 2014, the Keck Institute for Space Studies (KISS) at the California Institute of Technology sponsored a one week workshop with 30 specialists in the key techniques and technologies that can bring these technique to readiness. In this paper, we describe the key synergies with earth science drawing on methods from terrestrial seismology and oceanography and identify key technical issues that need to be solved as well as important precursor measurements that should be made.

Liposome production by microfluidics: potential and limiting factors

PubMed Central

Carugo, Dario; Bottaro, Elisabetta; Owen, Joshua; Stride, Eleanor; Nastruzzi, Claudio

2016-01-01

This paper provides an analysis of microfluidic techniques for the production of nanoscale lipid-based vesicular systems. In particular we focus on the key issues associated with the microfluidic production of liposomes. These include, but are not limited to, the role of lipid formulation, lipid concentration, residual amount of solvent, production method (including microchannel architecture), and drug loading in determining liposome characteristics. Furthermore, we propose microfluidic architectures for the mass production of liposomes with a view to potential industrial translation of this technology. PMID:27194474

Science and Technology Review June 2000

DOE Office of Scientific and Technical Information (OSTI.GOV)

de Pruneda, J.H.

2000-06-01

This issue contains the following articles: (1) ''Accelerating on the ASCI Challenge''. (2) ''New Day Daws in Supercomputing'' When the ASCI White supercomputer comes online this summer, DOE's Stockpile Stewardship Program will make another significant advanced toward helping to ensure the safety, reliability, and performance of the nation's nuclear weapons. (3) ''Uncovering the Secrets of Actinides'' Researchers are obtaining fundamental information about the actinides, a group of elements with a key role in nuclear weapons and fuels. (4) ''A Predictable Structure for Aerogels''. (5) ''Tibet--Where Continents Collide''.

Revitalizing Personalized Medicine: Respecting Biomolecular Complexities Beyond Gene Expression

PubMed Central

Jayachandran, D; Ramkrishna, U; Skiles, J; Renbarger, J; Ramkrishna, D

2014-01-01

Despite recent advancements in “omic” technologies, personalized medicine has not realized its fullest potential due to isolated and incomplete application of gene expression tools. In many instances, pharmacogenomics is being interchangeably used for personalized medicine, when actually it is one of the many facets of personalized medicine. Herein, we highlight key issues that are hampering the advancement of personalized medicine and highlight emerging predictive tools that can serve as a decision support mechanism for physicians to personalize treatments. PMID:24739991

The National Shipbuilding Research Program. 1997 Ship Production Symposium, Paper Number 20: Design and Production of ANZAC Frigates for the RAN and RNZN: Progress Towards International Competitiveness

DTIC Science & Technology

1997-04-01

and New Zealand Industry Involvement ANZIP Australian and New Zealand Industry Program ASSC ANZAC Ship Support Centre ASTEC Australian Science...of performance measurement systems and benchmarking.” In September 1994, the Australian Science, Technology and Engineering Council ( ASTEC ) commenced...more in- depth analysis of the key issues facing Australia in a number of areas. Five Partnerships have been established, one of which is the ASTEC

JPRS Report Science & Technology China.

DTIC Science & Technology

1989-04-18

0081] of the Department of Virology, Xi’an Medical University] [ Text ] An ACCA -ELISA (IgA complex capture assay) method was established to detect...Resources: "Some Strategic Issues in the Development of Geological S&T"] [ Text ] During the Sixth 5-Year Plan, the completion of attacks on key S&T...1367 3843], et al., of the Institute of Physics, Chinese Academy of Sciences] [ Text ] The 5.8, 3.0 and 1.2 MeV Li ions were used to study the MBE Ino

RNAi-based GM plants: food for thought for risk assessors.

PubMed

Ramon, Matthew; Devos, Yann; Lanzoni, Anna; Liu, Yi; Gomes, Ana; Gennaro, Andrea; Waigmann, Elisabeth

2014-12-01

RNA interference (RNAi) is an emerging technology that offers new opportunities for the generation of new traits in genetically modified (GM) plants. Potential risks associated with RNAi-based GM plants and issues specific to their risk assessment were discussed during an international scientific workshop (June 2014) organized by the European Food Safety Authority (EFSA). Selected key outcomes of the workshop are reported here. © 2014 Society for Experimental Biology, Association of Applied Biologists and John Wiley & Sons Ltd.

Methane Storage in Biosilica-Supported Semiclathrates at Ambient Temperature and Pressure

NASA Astrophysics Data System (ADS)

Li, Liang; Wang, Suying; Wang, Weixing

2018-01-01

Two key issues regarding the use of clathrates and semiclathrates for practical gas storage and transport is the pressure-temperature stability of the material and very low formation kinetics. For many practical applications, the avoidance of cooling, gas overpressure, and mechanical mixing would be very desirable. Here, we show that biosilica supports from rice husks greatly enhance gases uptake kinetics in tetra-iso-amyl ammonium bromide semiclathrates without introducing complex mixing technologies. These systems show excellent thermal stability and good recyclability.

Cybersecurity in Artificial Pancreas Experiments.

PubMed

O'Keeffe, Derek T; Maraka, Spyridoula; Basu, Ananda; Keith-Hynes, Patrick; Kudva, Yogish C

2015-09-01

Medical devices have transformed modern health care, and ongoing experimental medical technology trials (such as the artificial pancreas) have the potential to significantly improve the treatment of several chronic conditions, including diabetes mellitus. However, we suggest that, to date, the essential concept of cybersecurity has not been adequately addressed in this field. This article discusses several key issues of cybersecurity in medical devices and proposes some solutions. In addition, it outlines the current requirements and efforts of regulatory agencies to increase awareness of this topic and to improve cybersecurity.

The arms race and nuclear war

DOE Office of Scientific and Technical Information (OSTI.GOV)

Barash, D.P.

Addressing the history, physics, biology, economics, politics, psychology, and ethics of nuclear armaments, the author provides a survey of diverse facets of the nuclear controversy. The study encompasses such key areas as nuclear hardware and technology; the short- and long-term effects of nuclear weapons; strategic doctrine, deterrence and defense policy; the arms race, arms control, and nuclear proliferation; and the economic impact, psychology, and ethics of nuclear armaments. A ''Policy Issues'' section, presenting both the advocate and opponent sides of the debate, is included with each chapter.

Liposome production by microfluidics: potential and limiting factors.

PubMed

Carugo, Dario; Bottaro, Elisabetta; Owen, Joshua; Stride, Eleanor; Nastruzzi, Claudio

2016-05-19

This paper provides an analysis of microfluidic techniques for the production of nanoscale lipid-based vesicular systems. In particular we focus on the key issues associated with the microfluidic production of liposomes. These include, but are not limited to, the role of lipid formulation, lipid concentration, residual amount of solvent, production method (including microchannel architecture), and drug loading in determining liposome characteristics. Furthermore, we propose microfluidic architectures for the mass production of liposomes with a view to potential industrial translation of this technology.

Demonstration of the Potential of Magnetic Tunnel Junctions for a Universal RAM Technology

NASA Astrophysics Data System (ADS)

Gallagher, William J.

2000-03-01

Over the past four years, tunnel junctions with magnetic electrodes have emerged as promising devices for future magnetoresistive sensing and for information storage. This talk will review advances in these devices, focusing particularly on the use of magnetic tunnel junctions for magnetic random access memory (MRAM). Exchange-biased versions of magnetic tunnel junctions (MTJs) in particular will be shown to have useful properties for forming magnetic memory storage elements in a novel cross-point architecture. Exchange-biased MTJ elements have been made with areas as small as 0.1 square microns and have shown magnetoresistance values exceeding 40 The potential of exchange-biased MTJs for MRAM has been most seriously explored in a demonstration experiment involving the integration of 0.25 micron CMOS technology with a special magnetic tunnel junction "back end." The magnetic back end is based upon multi-layer magnetic tunnel junction growth technology which was developed using research-scale equipment and one-inch size substrates. For the demonstration, the CMOS wafers processed through two metal layers were cut into one-inch squares for depositions of bottom-pinned exchange-biased magnetic tunnel junctions. The samples were then processed through four additional lithographic levels to complete the circuits. The demonstration focused attention on a number of processing and device issues that were addressed successfully enough that key performance aspects of MTJ MRAM were demonstrated in 1 K bit arrays, including reads and writes in less than 10 ns and nonvolatility. While other key issues remain to be addressed, these results suggest that MTJ MRAM might simultaneously provide much of the functionality now provided separately by SRAM, DRAM, and NVRAM.

"Harnessing genomics to improve health in Africa" - an executive course to support genomics policy.

PubMed

Smith, Alyna C; Mugabe, John; Singer, Peter A; Daar, Abdallah S

2005-01-24

BACKGROUND: Africa in the twenty-first century is faced with a heavy burden of disease, combined with ill-equipped medical systems and underdeveloped technological capacity. A major challenge for the international community is to bring scientific and technological advances like genomics to bear on the health priorities of poorer countries. The New Partnership for Africa's Development has identified science and technology as a key platform for Africa's renewal. Recognizing the timeliness of this issue, the African Centre for Technology Studies and the University of Toronto Joint Centre for Bioethics co-organized a course on Genomics and Public Health Policy in Nairobi, Kenya, the first of a series of similar courses to take place in the developing world. This article presents the findings and recommendations that emerged from this process, recommendations which suggest that a regional approach to developing sound science and technology policies is the key to harnessing genome-related biotechnology to improve health and contribute to human development in Africa. METHODS: The objectives of the course were to familiarize participants with the current status and implications of genomics for health in Africa; to provide frameworks for analyzing and debating the policy and ethical questions; and to begin developing a network across different sectors by sharing perspectives and building relationships. To achieve these goals the course brought together a diverse group of stakeholders from academic research centres, the media, non-governmental, voluntary and legal organizations to stimulate multi-sectoral debate around issues of policy. Topics included scientific advances in genomics innovation systems and business models, international regulatory frameworks, as well as ethical and legal issues. RESULTS: Seven main recommendations emerged: establish a network for sustained dialogue among participants; identify champions among politicians; use the New Plan for African Development (NEPAD) as entry point onto political agenda; commission an African capacity survey in genomics-related R&D to determine areas of strength; undertake a detailed study of R&D models with demonstrated success in the developing world, i.e. China, India, Cuba, Brazil; establish seven regional research centres of excellence; and, create sustainable financing mechanisms. A concrete outcome of this intensive five-day course was the establishment of the African Genome Policy Forum, a multi-stakeholder forum to foster further discussion on policy. CONCLUSION: With African leaders engaged in the New Partnership for Africa's Development, science and technology is well poised to play a valuable role in Africa's renewal, by contributing to economic development and to improved health. Africa's first course on Genomics and Public Health Policy aspired to contribute to the effort to bring this issue to the forefront of the policy debate, focusing on genomics through the lens of public health. The process that has led to this course has served as a model for three subsequent courses (in India, Venezuela and Oman), and the establishment of similar regional networks on genomics and policy, which could form the basis for inter-regional dialogue in the future.

Satellite-instrument system engineering best practices and lessons

NASA Astrophysics Data System (ADS)

Schueler, Carl F.

2009-08-01

This paper focuses on system engineering development issues driving satellite remote sensing instrumentation cost and schedule. A key best practice is early assessment of mission and instrumentation requirements priorities driving performance trades among major instrumentation measurements: Radiometry, spatial field of view and image quality, and spectral performance. Key lessons include attention to technology availability and applicability to prioritized requirements, care in applying heritage, approaching fixed-price and cost-plus contracts with appropriate attention to risk, and assessing design options with attention to customer preference as well as design performance, and development cost and schedule. A key element of success either in contract competition or execution is team experience. Perhaps the most crucial aspect of success, however, is thorough requirements analysis and flowdown to specifications driving design performance with sufficient parameter margin to allow for mistakes or oversights - the province of system engineering from design inception to development, test and delivery.

[New image of home nursing created by point of care testing (POCT) - examination of issues in the introduction of POCT].

PubMed

Hata, Kiyomi

2014-12-01

With the rising number of patients who rely on medical care, it is necessary to use evolving health care technology appropriately, to control health care costs, and to enhance the well-being of patients in the home care setting. Point of care testing (POCT)is instrumental system for such demands for home care; however, this term remains relatively unknown in Japan. For this research, I conducted a qualitative analysis of factors based on stories obtained through group interviews of 11 experienced home visiting nurses who work at three home-visit nursing stations for the purpose of clarifying issues in the introduction of POCT. The results of the research identified five categories and 16 subcategories for issues in the introduction of POCT. The identified categories are expected to be useful for the spread of POCT in the future. Key words: Point of care testing, Home care nursing.

Feasibility and benefits of laminar flow control on supersonic cruise airplanes

NASA Technical Reports Server (NTRS)

Powell, A. G.; Agrawal, S.; Lacey, T. R.

1989-01-01

An evaluation was made of the applicability and benefits of laminar flow control (LFC) technology to supersonic cruise airplanes. Ancillary objectives were to identify the technical issues critical to supersonic LFC application, and to determine how those issues can be addressed through flight and wind-tunnel testing. Vehicle types studied include a Mach 2.2 supersonic transport configuration, a Mach 4.0 transport, and two Mach 2-class fighter concepts. Laminar flow control methodologies developed for subsonic and transonic wing laminarization were extended and applied. No intractible aerodynamic problems were found in applying LFC to airplanes of the Mach 2 class, even ones of large size. Improvements of 12 to 17 percent in lift-drag ratios were found. Several key technical issues, such as contamination avoidance and excresence criteria were identified. Recommendations are made for their resolution. A need for an inverse supersonic wing design methodology is indicated.

Parametric Modeling of the Safety Effects of NextGen Terminal Maneuvering Area Conflict Scenarios

NASA Technical Reports Server (NTRS)

Rogers, William H.; Waldron, Timothy P.; Stroiney, Steven R.

2011-01-01

The goal of this work was to analytically identify and quantify the issues, challenges, technical hurdles, and pilot-vehicle interface issues associated with conflict detection and resolution (CD&R)in emerging operational concepts for a NextGen terminal aneuvering area, including surface operations. To this end, the work entailed analytical and trade studies focused on modeling the achievable safety benefits of different CD&R strategies and concepts in the current and future airport environment. In addition, crew-vehicle interface and pilot performance enhancements and potential issues were analyzed based on review of envisioned NextGen operations, expected equipage advances, and human factors expertise. The results of perturbation analysis, which quantify the high-level performance impact of changes to key parameters such as median response time and surveillance position error, show that the analytical model developed could be useful in making technology investment decisions.

Issues deserve attention in encapsulating probiotics: Critical review of existing literature.

PubMed

Chen, Jun; Wang, Qi; Liu, Cheng-Mei; Gong, Joshua

2017-04-13

Probiotic bacteria are being increasingly added to food for developing products with health-promoting properties. However, the efficacy of probiotics in commercial products is often questioned due to the loss of their viability during shelf storage and in human gastrointestinal tracts. Encapsulation of probiotics has been expected to provide protection to probiotics, but not many commercial products contain encapsulated and viable probiotic cells owing to various reasons. To promote the development and application of encapsulation technologies, this paper has critically reviewed previous publications with a focus on the areas where studies have fallen short, including insufficient consideration of structural effects of encapsulating material, general defects in encapsulating methods and issues in evaluation methodologies and risk assessments for application. Corresponding key issues that require further studies are highlighted. Some emerging trends in the field, such as current treads in encapsulating material and recently advanced encapsulation techniques, have also been discussed.

Bioinformatics and Microarray Data Analysis on the Cloud.

PubMed

Calabrese, Barbara; Cannataro, Mario

2016-01-01

High-throughput platforms such as microarray, mass spectrometry, and next-generation sequencing are producing an increasing volume of omics data that needs large data storage and computing power. Cloud computing offers massive scalable computing and storage, data sharing, on-demand anytime and anywhere access to resources and applications, and thus, it may represent the key technology for facing those issues. In fact, in the recent years it has been adopted for the deployment of different bioinformatics solutions and services both in academia and in the industry. Although this, cloud computing presents several issues regarding the security and privacy of data, that are particularly important when analyzing patients data, such as in personalized medicine. This chapter reviews main academic and industrial cloud-based bioinformatics solutions; with a special focus on microarray data analysis solutions and underlines main issues and problems related to the use of such platforms for the storage and analysis of patients data.

Architecture and System Engineering Development Study of Space-Based Satellite Networks for NASA Missions

NASA Technical Reports Server (NTRS)

Ivancic, William D.

2003-01-01

Traditional NASA missions, both near Earth and deep space, have been stovepipe in nature and point-to-point in architecture. Recently, NASA and others have conceptualized missions that required space-based networking. The notion of networks in space is a drastic shift in thinking and requires entirely new architectures, radio systems (antennas, modems, and media access), and possibly even new protocols. A full system engineering approach for some key mission architectures will occur that considers issues such as the science being performed, stationkeeping, antenna size, contact time, data rates, radio-link power requirements, media access techniques, and appropriate networking and transport protocols. This report highlights preliminary architecture concepts and key technologies that will be investigated.

A Socio-technical Approach for Transient SME Alliances

NASA Astrophysics Data System (ADS)

Rezgui, Yacine

The paper discusses technical requirements to promote the adoption of alliance modes of operation by SMEs in the construction sector. These requirements have provided a basis for specifying a set of functionality to support the collaboration and cooperation needs of SMEs. While service-oriented architectures and semantic web services provide the middleware technology to implement the identified functionality, a number of key technical limitations have been identified, including lack of support for the dynamic and non-functional characteristics of SME alliances distributed business processes, lack of execution monitoring functionality to manage running business processes, and lack of support for semantic reasoning to enable SME business process service composition. The paper examines these issues and provides key directions for supporting SME alliances effectively.

Government/Industry Workshop on Payload Loads Technology

NASA Technical Reports Server (NTRS)

1978-01-01

A fully operational space shuttle is discussed which will offer science the opportunity to explore near earth orbit and finally interplanetary space on nearly a limitless basis. This multiplicity of payload/experiment combinations and frequency of launches places many burdens on dynamicists to predict launch and landing environments accurately and efficiently. Two major problems are apparent in the attempt to design for the diverse environments: (1) balancing the design criteria (loads, etc.) between launch and orbit operations, and (2) developing analytical techniques that are reliable, accurate, efficient, and low cost to meet the challenge of multiple launches and payloads. This paper deals with the key issues inherent in these problems, the key trades required, the basic approaches needed, and a summary of the state-of-the-art techniques.

Space Station Freedom advanced photovoltaics and battery technology development planning

NASA Technical Reports Server (NTRS)

Brender, Karen D.; Cox, Spruce M.; Gates, Mark T.; Verzwyvelt, Scott A.

1993-01-01

Space Station Freedom (SSF) usable electrical power is planned to be built up incrementally during assembly phase to a peak of 75 kW end-of-life (EOL) shortly after Permanently Manned Capability (PMC) is achieved in 1999. This power will be provided by planar silicon (Si) arrays and nickel-hydrogen (NiH2) batteries. The need for power is expected to grow from 75 kW to as much as 150 kW EOL during the evolutionary phase of SSF, with initial increases beginning as early as 2002. Providing this additional power with current technology may not be as cost effective as using advanced technology arrays and batteries expected to develop prior to this evolutionary phase. A six-month study sponsored by NASA Langley Research Center and conducted by Boeing Defense and Space Group was initiated in Aug. 1991. The purpose of the study was to prepare technology development plans for cost effective advanced photovoltaic (PV) and battery technologies with application to SSF growth, SSF upgrade after its arrays and batteries reach the end of their design lives, and other low Earth orbit (LEO) platforms. Study scope was limited to information available in the literature, informal industry contacts, and key representatives from NASA and Boeing involved in PV and battery research and development. Ten battery and 32 PV technologies were examined and their performance estimated for SSF application. Promising technologies were identified based on performance and development risk. Rough order of magnitude cost estimates were prepared for development, fabrication, launch, and operation. Roadmaps were generated describing key issues and development paths for maturing these technologies with focus on SSF application.

Venus entry probe technology reference mission

NASA Astrophysics Data System (ADS)

van den Berg, M. L.; Falkner, P.; Atzei, A. C.; Phipps, A.; Mieremet, A.; Kraft, S.; Peacock, A.

The Venus Entry Probe is one of ESA's Technology Reference Missions (TRM). TRMs are model science-driven missions that are, although not part of the ESA science programme, able to provide focus to future technology requirements. This is accomplished through the study of several technologically demanding and scientifically meaningful mission concepts, which are strategically chosen to address diverse technological issues. The TRMs complement ESA's current mission specific development programme and allow the ESA Science Directorate to strategically plan the development of technologies that will enable potential future scientific missions. Key technological objectives for future planetary exploration include the use of small orbiters and in-situ probes with highly miniaturized and highly integrated payload suites. The low resource, and therefore low cost, spacecraft allow for a phased strategic approach to planetary exploration. The aim of the Venus Entry Probe TRM (VEP) is to study approaches for low cost in-situ exploration of the Venusian atmosphere. The mission profile consists of two minisats. The first satellite enters low Venus orbit. This satellite contains a highly integrated remote sensing payload suite primarily dedicated to support the in-situ atmospheric measurements of the aerobot. The second minisat enters deep elliptical orbit, deploys the aerobot, and subsequently operates as a data relay, data processing and overall resource allocation satellite. The micro-aerobot consists of a long-duration balloon that will analyze the Venusian middle cloud layer at an altitude of ˜ 55 km, where the environment is relatively benign (T = 20 C and p = 0.45 bars). The balloon will deploy a swarm of active ballast probes, which determine vertical profiles of selected properties of the lower atmosphere. In this presentation, the mission objectives and profile of the Venus Entry Probe TRM will be given as well as the key technological challenges.

Surrogacy in modern obstetric practice.

PubMed

Burrell, Celia; Edozien, Leroy C

2014-10-01

Surrogacy is rising in profile and prevalence, which means that perinatal care providers face an increasing likelihood of encountering a case in their clinical practice. Rapidly expanding scientific knowledge (for example, fetal programming) and technological advances (for example, prenatal screening and diagnosis) pose challenges in the management of the surrogate mother; in particular, they could exacerbate conflict between the interests of the baby, the surrogate mother, and the intending parent(s). Navigating these often-tranquil-but-sometimes-stormy waters is facilitated if perinatal care providers are aware of the relevant ethical, legal, and service delivery issues. This paper describes the ethical and legal context of surrogacy, and outlines key clinical practice issues in management of the surrogate mother. Copyright © 2014 Elsevier Ltd. All rights reserved.

The Dawning of the Ethics of Environmental Robots.

PubMed

van Wynsberghe, Aimee; Donhauser, Justin

2017-10-23

Environmental scientists and engineers have been exploring research and monitoring applications of robotics, as well as exploring ways of integrating robotics into ecosystems to aid in responses to accelerating environmental, climatic, and biodiversity changes. These emerging applications of robots and other autonomous technologies present novel ethical and practical challenges. Yet, the critical applications of robots for environmental research, engineering, protection and remediation have received next to no attention in the ethics of robotics literature to date. This paper seeks to fill that void, and promote the study of environmental robotics. It provides key resources for further critical examination of the issues environmental robots present by explaining and differentiating the sorts of environmental robotics that exist to date and identifying unique conceptual, ethical, and practical issues they present.

Technical viability and development needs for waste forms and facilities

DOE Office of Scientific and Technical Information (OSTI.GOV)

Pegg, I.; Gould, T.

1996-05-01

The objective of this breakout session was to provide a forum to discuss technical issues relating to plutonium-bearing waste forms and their disposal facilities. Specific topics for discussion included the technical viability and development needs associated with the waste forms and/or disposal facilities. The expected end result of the session was an in-depth (so far as the limited time would allow) discussion of key issues by the session participants. The session chairs expressed allowance for, and encouragement of, alternative points of view, as well as encouragement for discussion of any relevant topics not addressed in the paper presentations. It wasmore » not the intent of this session to recommend or advocate any one technology over another.« less

The future of very large subsonic transports

NASA Technical Reports Server (NTRS)

Justice, R. Steven; Hays, Anthony P.; Parrott, Ed L.

1996-01-01

The Very Large Subsonic Transport (VLST) is a multi-use commercial passenger, commercial cargo, and military airlifter roughly 50% larger than the current Lockheed C-5 and Boeing 747. Due to the large size and cost of the VLST, it is unlikely that the commercial market can support more than one aircraft production line, while declining defense budgets will not support a dedicated military VLST. A successful VLST must therefore meet airline requirements for more passenger and cargo capacity on congested routes into slot-limited airports and also provide a cost effective heavy airlift capacity to support the overseas deployment of US military forces. A successful VLST must satisfy three key missions: commercial passenger service with nominal seating capacity at a minimum of 650 passengers with a range capability of 7,000 to 10,000 miles; commercial air cargo service for containerized cargo to support global manufacturing of high value added products, 'just-in-time' parts delivery, and the general globalization of trade; and military airlift with adequate capacity to load current weapon systems, with minimal break-down, over global ranges (7,000 to 10,000 miles) required to reach the operational theater without need of overseas bases and midair refueling. The development of the VLST poses some technical issues specific to large aircraft, but also key technologies applicable to a wide range of subsonic transport aircraft. Key issues and technologies unique to the VLST include: large composite structures; dynamic control of a large, flexible structure; aircraft noise requirements for aircraft over 850,000 pounds; and increased aircraft separation due to increased wake vortex generation. Other issues, while not unique to the VLST, will critically impact the ability to build an efficient and affordable aircraft include: active control systems: Fly-By-Light/Power-By-Wire (FBL/PBW); high lift systems; flight deck associate systems; laminar flow; emergency egress; and modular design. The VLST will encounter severe restrictions on weight, ground flotation, span, length, and door height to operate at current airports/bases, gates, and cargo loading systems. One option under consideration is for a sea-based VLST, either a conventional seaplane or Wing-In-Ground effect (WIG) vehicle, which would allow greater operational flexibility, while introducing other design challenges such as water impact loads and salt-water corrosion. Lockheed Martin is currently developing a floatplane version of the C-130 Hercules which will provide experience with a modern sea-based aircraft. In addition to its own ongoing research activities, Lockheed Martin is also participating in the NASA Advanced Subsonic Technology, High Speed Research (HSR), and other programs which address some of the technologies needed for the VLST. The VLST will require NASA and US aerospace companies to work together to develop new capabilities and technologies for make the VLST a viable part of transportation beyond 2000.

NEET In-Pile Ultrasonic Sensor Enablement-FY 2012 Status Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

JE Daw; JL Rempe; BR Tittmann

2012-09-01

Several Department Of Energy-Nuclear Energy (DOE-NE) programs, such as the Fuel Cycle Research and Development, Advanced Reactor Concepts, Light Water Reactor Sustainability, and Next Generation Nuclear Plant programs, are investigating new fuels and materials for advanced and existing reactors. A key objective of such programs is to understand the performance of these fuels and materials when irradiated. The Nuclear Energy Enabling Technology (NEET) Advanced Sensors and Instrumentation (ASI) in-pile instrumentation development activities are focused upon addressing cross-cutting needs for DOE-NE irradiation testing by providing higher fidelity, real-time data, with increased accuracy and resolution from smaller, compact sensors that are lessmore » intrusive. Ultrasonic technologies offer the potential to measure a range of parameters, including geometry changes, temperature, crack initiation and growth, gas pressure and composition, and microstructural changes, under harsh irradiation test conditions. There are two primary issues associated with in-pile deployment of ultrasonic sensors. The first is transducer survivability. The ability of ultrasonic transducer materials to maintain their useful properties during an irradiation must be demonstrated. The second issue is signal processing. Ultrasonic testing is typically performed in a lab or field environment, where the sensor and sample are accessible. Due to the harsh nature of in-pile testing, and the range of measurements that are desired, an enhanced signal processing capability is needed to make in-pile ultrasonic sensors viable. This project addresses these technology deployment issues.« less

Study of high-speed civil transports

NASA Technical Reports Server (NTRS)

1989-01-01

A systems study to identify the economic potential for a high-speed commercial transport (HSCT) has considered technology, market characteristics, airport infrastructure, and environmental issues. Market forecasts indicate a need for HSCT service in the 2000/2010 time frame conditioned on economic viability and environmental acceptability. Design requirements focused on a 300 passenger, 3 class service, and 6500 nautical mile range based on the accelerated growth of the Pacific region. Compatibility with existing airports was an assumed requirement. Mach numbers between 2 and 25 were examined in conjunction with the appropriate propulsion systems, fuels, structural materials, and thermal management systems. Aircraft productivity was a key parameter with aircraft worth, in comparison to aircraft price, being the airline-oriented figure of merit. Aircraft screening led to determination that Mach 3.2 (TSJF) would have superior characteristics to Mach 5.0 (LNG) and the recommendation that the next generation high-speed commercial transport aircraft use a kerosene fuel. The sensitivity of aircraft performance and economics to environmental constraints (e.g., sonic boom, engine emissions, and airport/community noise) was identified together with key technologies. In all, current technology is not adequate to produce viable HSCTs for the world marketplace. Technology advancements must be accomplished to meet environmental requirements (these requirements are as yet undetermined for sonic boom and engine emissions). High priority is assigned to aircraft gross weight reduction which benefits both economics and environmental aspects. Specific technology requirements are identified and national economic benefits are projected.

Interstellar Propulsion Research Within NASA

NASA Technical Reports Server (NTRS)

Johnson, Les; Cook, Stephen (Technical Monitor)

2001-01-01

NASA is actively conducting advanced propulsion research and technology development in various in-space transportation technologies with potential application to interstellar missions and precursors. Within the last few years, interest in the scientific community in interstellar missions as well as outer heliospheric missions, which could function as interstellar precursor missions, has increased. A mission definition team was charted by NASA to define such a precursor, The Interstellar Probe, which resulted in a prioritization of relatively near-term transportation technologies to support its potential implementation. In addition, the goal of finding and ultimately imaging extra solar planets has raised the issue of our complete inability to mount an expedition to such as planet, should one be found. Even contemplating such a mission with today's technology is a stretch of the imagination. However, there are several propulsion concepts, based on known physics, that have promise to enable interstellar exploration in the future. NASA is making small, incremental investments in some key advanced propulsion technologies in an effort to advance their state-of-the-art in support potential future mission needs. These technologies, and their relative maturity, are described.

[New advances in animal transgenic technology].

PubMed

Sun, Zhen-Hong; Miao, Xiang-Yang; Zhu, Rui-Liang

2010-06-01

Animal transgenic technology is one of the fastest growing biotechnology in the 21st century. It is used to integrate foreign genes into the animal genome by genetic engineering technology so that foreign genes can be expressed and inherited to the offspring. The transgenic efficiency and precise control of gene expression are the key limiting factors on preparation of transgenic animals. A variety of transgenic techniques are available, each of which has its own advantages and disadvantages and still needs further study because of unresolved technical and safety issues. With the in-depth research, the transgenic technology will have broad application prospects in the fields of exploration of gene function, animal genetic improvement, bioreactor, animal disease models, organ transplantation and so on. This article reviews the recently developed animal gene transfer techniques, including germline stem cell mediated method to improve the efficiency, gene targeting to improve the accuracy, RNA interference (RNAi)-mediated gene silencing technology, and the induced pluripotent stem cells (iPS) transgenic technology. The new transgenic techniques can provide a better platform for the study of trans-genic animals and promote the development of medical sciences, livestock production, and other fields.

Critical issues for the application of integrated MEMS/CMOS technologies to inertial measurement units

DOE Office of Scientific and Technical Information (OSTI.GOV)

Smith, J.H.; Ellis, J.R.; Montague, S.

1997-03-01

One of the principal applications of monolithically integrated micromechanical/microelectronic systems has been accelerometers for automotive applications. As integrated MEMS/CMOS technologies such as those developed by U.C. Berkeley, Analog Devices, and Sandia National Laboratories mature, additional systems for more sensitive inertial measurements will enter the commercial marketplace. In this paper, the authors will examine key technology design rules which impact the performance and cost of inertial measurement devices manufactured in integrated MEMS/CMOS technologies. These design parameters include: (1) minimum MEMS feature size, (2) minimum CMOS feature size, (3) maximum MEMS linear dimension, (4) number of mechanical MEMS layers, (5) MEMS/CMOS spacing.more » In particular, the embedded approach to integration developed at Sandia will be examined in the context of these technology features. Presently, this technology offers MEMS feature sizes as small as 1 {micro}m, CMOS critical dimensions of 1.25 {micro}m, MEMS linear dimensions of 1,000 {micro}m, a single mechanical level of polysilicon, and a 100 {micro}m space between MEMS and CMOS. This is applicable to modern precision guided munitions.« less

Collective movement in ecology: from emerging technologies to conservation and management.

PubMed

Westley, Peter A H; Berdahl, Andrew M; Torney, Colin J; Biro, Dora

2018-05-19

Recent advances in technology and quantitative methods have led to the emergence of a new field of study that stands to link insights of researchers from two closely related, but often disconnected disciplines: movement ecology and collective animal behaviour. To date, the field of movement ecology has focused on elucidating the internal and external drivers of animal movement and the influence of movement on broader ecological processes. Typically, tracking and/or remote sensing technology is employed to study individual animals in natural conditions. By contrast, the field of collective behaviour has quantified the significant role social interactions play in the decision-making of animals within groups and, to date, has predominantly relied on controlled laboratory-based studies and theoretical models owing to the constraints of studying interacting animals in the field. This themed issue is intended to formalize the burgeoning field of collective movement ecology which integrates research from both movement ecology and collective behaviour. In this introductory paper, we set the stage for the issue by briefly examining the approaches and current status of research in these areas. Next, we outline the structure of the theme issue and describe the obstacles collective movement researchers face, from data acquisition in the field to analysis and problems of scale, and highlight the key contributions of the assembled papers. We finish by presenting research that links individual and broad-scale ecological and evolutionary processes to collective movement, and finally relate these concepts to emerging challenges for the management and conservation of animals on the move in a world that is increasingly impacted by human activity.This article is part of the theme issue 'Collective movement ecology'. © 2018 The Author(s).

Deployment Effects of Marin Renewable Energy Technologies

DOE Office of Scientific and Technical Information (OSTI.GOV)

Brian Polagye; Mirko Previsic

2010-06-17

Given proper care in siting, design, deployment, operation and maintenance, marine and hydrokinetic technologies could become one of the more environmentally benign sources of electricity generation. In order to accelerate the adoption of these emerging hydrokinetic and marine energy technologies, navigational and environmental concerns must be identified and addressed. All developing hydrokinetic projects involve a wide variety of stakeholders. One of the key issues that site developers face as they engage with this range of stakeholders is that many of the possible conflicts (e.g., shipping and fishing) and environmental issues are not well-understood, due to a lack of technical certainty.more » In September 2008, re vision consulting, LLC was selected by the Department of Energy (DoE) to apply a scenario-based approach to the emerging wave and tidal technology sectors in order to evaluate the impact of these technologies on the marine environment and potentially conflicting uses. The project’s scope of work includes the establishment of baseline scenarios for wave and tidal power conversion at potential future deployment sites. The scenarios will capture variations in technical approaches and deployment scales to properly identify and characterize environmental impacts and navigational effects. The goal of the project is to provide all stakeholders with an improved understanding of the potential effects of these emerging technologies and focus all stakeholders onto the critical issues that need to be addressed. This groundwork will also help in streamlining siting and associated permitting processes, which are considered key hurdles for the industry’s development in the U.S. today. Re vision is coordinating its efforts with two other project teams funded by DoE which are focused on regulatory and navigational issues. The results of this study are structured into three reports: 1. Wave power scenario description 2. Tidal power scenario description 3. Framework for Identifying Key Environmental Concerns This is the second report in the sequence and describes the results of conceptual feasibility studies of tidal power plants deployed in Tacoma Narrows, Washington. The Narrows contain many of the same competing stakeholder interactions identified at other tidal power sites and serves as a representative case study. Tidal power remains at an early stage of development. As such, a wide range of different technologies are being pursued by different manufacturers. In order to properly characterize impacts, it is useful to characterize the range of technologies that could be deployed at the site of interest. An industry survey informs the process of selecting representative tidal power devices. The selection criteria is that such devices are at an advanced stage of development to reduce technical uncertainties and that enough data are available from the manufacturers to inform the conceptual design process of this study. Further, an attempt is made to cover the range of different technologies under development to capture variations in potential environmental effects. A number of other developers are also at an advanced stage of development including Verdant Power, which has demonstrated an array of turbines in the East River of New York, Clean Current, which has demonstrated a device off Race Rocks, BC, and OpenHydro, which has demonstrated a device at the European Marine Energy Test Center and is on the verge of deploying a larger device in the Bay of Fundy. MCT demonstrated their device both at Devon (UK) and Strangford Narrows (Northern Ireland). Furthermore OpenHydro, CleanCurrent, and MCT are the three devices being installed at the Minas Passage (Canada). Environmental effects will largely scale with the size of tidal power development. In many cases, the effects of a single device may not be measurable, while larger scale device arrays may have cumulative impacts that differ significantly from smaller scale deployments. In order to characterize these effects, scenarios are established at three deployment scales which nominally represent (1) a small pilot deployment, (2) an early, small commercial deployment, and (3) a large commercial scale plant. For the three technologies and scales at the selected site, this results in a total of nine deployment scenarios outlined in the report.« less

Hot air ablowin! 'Media-speak', social conflict, and the Australian 'decoupled' wind farm controversy.

PubMed

Hindmarsh, Richard

2014-04-01

In work in science, technology, and society social conflict around wind farms has a growing profile, not least because it draws our attention to two key interrelated themes: 'science, technology and governance' and 'socio-technological systems'. In this article on Australian wind farm development and siting, these themes are highlighted in contexts of sustainability, legitimacy, and competency for policy effectiveness. There is enduring social conflict around wind farms at the local community level, but little government understanding of this conflict or willingness to respond adequately to resolve it. This article examines the conflict through the lens of print media analysis. A key finding of the five identified is that people seeing wind farms as spoiling a sense of place is a primary cause of enduring social conflict at the local community level around wind farms, alongside significant environmental issues and inadequate community engagement; this finding also indicates a central reason for the highly problematic state of Australian wind energy transitions. In turn, by identifying this problematic situation as one of a significantly 'decoupled' and 'dysfunctional' condition of the Australian socio-technological wind farm development and siting system, I suggest remedies including those of a deliberative nature that also respond to the Habermas-Mouffe debate. These inform a socio-technical siting approach or pathway to better respect and navigate contested landscapes for enhanced renewable energy transitions at the local level.

Evaluating rare earth element availability: a case with revolutionary demand from clean technologies.

PubMed

Alonso, Elisa; Sherman, Andrew M; Wallington, Timothy J; Everson, Mark P; Field, Frank R; Roth, Richard; Kirchain, Randolph E

2012-03-20

The future availability of rare earth elements (REEs) is of concern due to monopolistic supply conditions, environmentally unsustainable mining practices, and rapid demand growth. We present an evaluation of potential future demand scenarios for REEs with a focus on the issue of comining. Many assumptions were made to simplify the analysis, but the scenarios identify some key variables that could affect future rare earth markets and market behavior. Increased use of wind energy and electric vehicles are key elements of a more sustainable future. However, since present technologies for electric vehicles and wind turbines rely heavily on dysprosium (Dy) and neodymium (Nd), in rare-earth magnets, future adoption of these technologies may result in large and disproportionate increases in the demand for these two elements. For this study, upper and lower bound usage projections for REE in these applications were developed to evaluate the state of future REE supply availability. In the absence of efficient reuse and recycling or the development of technologies which use lower amounts of Dy and Nd, following a path consistent with stabilization of atmospheric CO(2) at 450 ppm may lead to an increase of more than 700% and 2600% for Nd and Dy, respectively, over the next 25 years if the present REE needs in automotive and wind applications are representative of future needs.

Theory and application for the promotion of wheat production in China: past, present and future.

PubMed

Xu, Zhenzhu; Yu, Zhenwen; Zhao, Junye

2013-08-15

Food security is becoming a crucial concern worldwide. In this study, we focus on wheat - a staple crop in China - as a model to review its history, status quo and future scenarios, with regard to key production technologies and management practices for wheat production and associated food security issues since the new era in China: the post-1949 era. First, the dominant technologies and management practices over the past 60 years are reviewed. Secondly, we outline several key innovative technologies and their theoretical bases over the last decade, including (i) prohibiting excessively early senescence at a later growth stage to maintain viable leaves with higher photosynthetic capacity, (ii) postponing top dressing nitrogen application to balance carbon and nitrogen nutrition, and (iii) achieving both high yield and better grain quality mainly by increasing soil productivity and balancing the ratio of nutrient elements. Finally, concerns such as water shortages and excessive application of chemical fertilizers are presented. Nevertheless, under high negative conditions, including global warming, rapid population growth, decreasing amounts of arable land, increasing competition with cash crops and severe environmental pollution, we conclude that domestic food production will be able to meet Chinese demand in the mid to long term, because increasingly innovative technologies and improved management practices have been and may continue to be applied appropriately. © 2013 Society of Chemical Industry.

Microorganisms: Good or Evil, MIRRI Provides Biosecurity Awareness.

PubMed

Smith, David; Martin, Dunja; Novossiolova, Tatyana

2017-03-01

The life-science community is a key stakeholder in the effort to ensure that the advances in biotechnology are not misused. Unfortunately, to date, the engagement of life scientists with issues of biosecurity has been limited. Microorganisms have been harnessed for the benefit of humankind but in the wrong hands could be used in direct or indirect acts against humans, livestock, crops, food, water infrastructure and other economically valuable entities. The Microbial Resources Research Infrastructure in its preparatory phase has addressed the topic implementing a code of conduct as part of its programme of prevention of malicious use and continues to work with the international community to raise awareness of best practice to avoid misuse of microorganisms. Biosecurity has become a major concern for several countries creating numerous activities to put in place counter measures, risk assessment, legislation and emergency response. The goal is to implement measures to protect us against malicious use of microorganisms, their products, information and technology transfer. Through this paper, we wish to discuss some of the activities that are underway, mention key educational tools and provide scientists with information on addressing biosecurity issues.

Digital Traces of Behaviour Within Addiction: Response to Griffiths (2017).

PubMed

Ellis, David A; Kaye, Linda K; Wilcockson, Thomas D W; Ryding, Francesca C

2018-01-01

Griffiths' (2017) response to the recent commentary piece by Ryding and Kaye (2017) on "Internet Addiction: A conceptual minefield" provided a useful critique and extension of some key issues. We take this opportunity to further build upon on one of these issues to provide some further insight into how the field of "internet addiction" (IA) or technological addictions more generally, may benefit from capitalising on behavioural data. As such, this response extends Griffiths' (2007) points surrounding the efficacy of behavioural data previously used in studies on problematic gambling, to consider its merit for future research on IA or associated topics such as Internet Gaming Disorder (IGD) or "Smartphone addiction". Within this, we highlight the challenges associated with utilising behavioural data but provide some practical solutions which may support researchers and practitioners in this field. These recent developments could, in turn, advance our understanding and potentially validate such concepts by establishing behavioural correlates, conditions and contexts. Indeed, corroborating behavioural metrics alongside self-report measures presents a key opportunity if scholars and practitioners are to move the field forward.

Dating Violence among College Students: Key Issues for College Counselors

ERIC Educational Resources Information Center

Murray, Christine E.; Kardatzke, Kerrie N.

2007-01-01

The authors present a review of literature examining dating violence among college students. They describe 6 key issues related to dating violence among college students that affect college counselors' work. These key issues relate to the incidence and prevalence of physical, sexual, and psychological violence in college students' dating…

Perovskite/silicon-based heterojunction tandem solar cells with 14.8% conversion efficiency via adopting ultrathin Au contact

NASA Astrophysics Data System (ADS)

Fan, Lin; Wang, Fengyou; Liang, Junhui; Yao, Xin; Fang, Jia; Zhang, Dekun; Wei, Changchun; Zhao, Ying; Zhang, Xiaodan

2017-01-01

A rising candidate for upgrading the performance of an established narrow-bandgap solar technology without adding much cost is to construct the tandem solar cells from a crystalline silicon bottom cell and a high open-circuit voltage top cell. Here, we present a four-terminal tandem solar cell architecture consisting of a self-filtered planar architecture perovskite top cell and a silicon heterojunction bottom cell. A transparent ultrathin gold electrode has been used in perovskite solar cells to achieve a semi-transparent device. The transparent ultrathin gold contact could provide a better electrical conductivity and optical reflectance-scattering to maintain the performance of the top cell compared with the traditional metal oxide contact. The four-terminal tandem solar cell yields an efficiency of 14.8%, with contributions of the top (8.98%) and the bottom cell (5.82%), respectively. We also point out that in terms of optical losses, the intermediate contact of self-filtered tandem architecture is the uppermost problem, which has been addressed in this communication, and the results show that reducing the parasitic light absorption and improving the long wavelength range transmittance without scarifying the electrical properties of the intermediate hole contact layer are the key issues towards further improving the efficiency of this architecture device. Project supported by the International Cooperation Projects of the Ministry of Science and Technology (No. 2014DFE60170), the National Natural Science Foundation of China (Nos. 61474065, 61674084), the Tianjin Research Key Program of Application Foundation and Advanced Technology (No. 15JCZDJC31300), the Key Project in the Science & Technology Pillar Program of Jiangsu Province (No. BE2014147-3), and the 111 Project (No. B16027).

Identification of Crew-Systems Interactions and Decision Related Trends

NASA Technical Reports Server (NTRS)

Jones, Sharon Monica; Evans, Joni K.; Reveley, Mary S.; Withrow, Colleen A.; Ancel, Ersin; Barr, Lawrence

2013-01-01

NASA Vehicle System Safety Technology (VSST) project management uses systems analysis to identify key issues and maintain a portfolio of research leading to potential solutions to its three identified technical challenges. Statistical data and published safety priority lists from academic, industry and other government agencies were reviewed and analyzed by NASA Aviation Safety Program (AvSP) systems analysis personnel to identify issues and future research needs related to one of VSST's technical challenges, Crew Decision Making (CDM). The data examined in the study were obtained from the National Transportation Safety Board (NTSB) Aviation Accident and Incident Data System, Federal Aviation Administration (FAA) Accident/Incident Data System and the NASA Aviation Safety Reporting System (ASRS). In addition, this report contains the results of a review of safety priority lists, information databases and other documented references pertaining to aviation crew systems issues and future research needs. The specific sources examined were: Commercial Aviation Safety Team (CAST) Safety Enhancements Reserved for Future Implementation (SERFIs), Flight Deck Automation Issues (FDAI) and NTSB Most Wanted List and Open Recommendations. Various automation issues taxonomies and priority lists pertaining to human factors, automation and flight design were combined to create a list of automation issues related to CDM.

Diagnostic microbiology in veterinary dermatology: present and future.

PubMed

Guardabassi, Luca; Damborg, Peter; Stamm, Ivonne; Kopp, Peter A; Broens, Els M; Toutain, Pierre-Louis

2017-02-01

The microbiology laboratory can be perceived as a service provider rather than an integral part of the healthcare team. The aim of this review is to discuss the current challenges of providing a state-of-the-art diagnostic veterinary microbiology service including the identification (ID) and antimicrobial susceptibility testing (AST) of key pathogens in veterinary dermatology. The Study Group for Veterinary Microbiology (ESGVM) of the European Society of Clinical Microbiology and Infectious Diseases (ESCMID) identified scientific, technological, educational and regulatory issues impacting the predictive value of AST and the quality of the service offered by microbiology laboratories. The advent of mass spectrometry has significantly reduced the time required for ID of key pathogens such as Staphylococcus pseudintermedius. However, the turnaround time for validated AST methods has remained unchanged for many years. Beyond scientific and technological constraints, AST methods are not harmonized and clinical breakpoints for some antimicrobial drugs are either missing or inadequate. Small laboratories, including in-clinic laboratories, are usually not adequately equipped to run up-to-date clinical microbiologic diagnostic tests. ESGVM recommends the use of laboratories employing mass spectrometry for ID and broth micro-dilution for AST, and offering assistance by expert microbiologists on pre- and post-analytical issues. Setting general standards for veterinary clinical microbiology, promoting antimicrobial stewardship, and the development of new, validated and rapid diagnostic methods, especially for AST, are among the missions of ESGVM. © 2017 The Authors. Veterinary Dermatology published by John Wiley & Sons Ltd on behalf of the ESVD and ACVD.

Maternity leave in normal pregnancy.

PubMed

Leduc, Dean

2011-08-01

To assist maternity care providers in recognizing and discussing health- and illness-related issues in pregnancy and their relationship to maternity benefits. Published literature was retrieved through searches of PubMed or Medline, CINAHL, and The Cochrane Library in 2009 using appropriate controlled vocabulary (e.g., maternity benefits) and key words (e.g., maternity, benefits, pregnancy). Results were restricted to systematic reviews, randomized controlled trials/controlled clinical trials, and observational studies. There were no date or language restrictions. Searches were updated on a regular basis and incorporated in the guideline to December 2009. Grey (unpublished) literature was identified through searching the web sites of health technology assessment and health technology assessment-related agencies, clinical practice guideline collections, clinical trial registries, and national and international medical specialty societies.

Desktop supercomputer: what can it do?

NASA Astrophysics Data System (ADS)

Bogdanov, A.; Degtyarev, A.; Korkhov, V.

2017-12-01

The paper addresses the issues of solving complex problems that require using supercomputers or multiprocessor clusters available for most researchers nowadays. Efficient distribution of high performance computing resources according to actual application needs has been a major research topic since high-performance computing (HPC) technologies became widely introduced. At the same time, comfortable and transparent access to these resources was a key user requirement. In this paper we discuss approaches to build a virtual private supercomputer available at user's desktop: a virtual computing environment tailored specifically for a target user with a particular target application. We describe and evaluate possibilities to create the virtual supercomputer based on light-weight virtualization technologies, and analyze the efficiency of our approach compared to traditional methods of HPC resource management.

Dark scenarios

NASA Astrophysics Data System (ADS)

Ahonen, Pasi; Alahuhta, Petteri; Daskala, Barbara; Delaitre, Sabine; Hert, Paul De; Lindner, Ralf; Maghiros, Ioannis; Moscibroda, Anna; Schreurs, Wim; Verlinden, Michiel

In this chapter, we present four "dark scenarios" that highlight the key socio-economic, legal, technological and ethical risks to privacy, identity, trust, security and inclusiveness posed by new AmI technologies. We call them dark scenarios, because they show things that could go wrong in an AmI world, because they present visions of the future that we do not want to become reality. The scenarios expose threats and vulnerabilities as a way to inform policy-makers and planners about issues they need to take into account in developing new policies or updating existing legislation. Before presenting the four scenarios and our analysis of each, we describe the process of how we created the scenarios as well as the elements in our methodology for analysing the scenarios.

Multipurpose prevention technologies: the future of HIV and STI protection

PubMed Central

2015-01-01

Every day, more than 1 million people are newly infected with sexually transmitted infections (STIs) that can lead to morbidity, mortality, and an increased risk of human immunodeficiency virus (HIV) acquisition. Existing prevention and management strategies, including behavior change, condom promotion, and therapy have not reduced the global incidence and prevalence, pointing to the need for novel innovative strategies. This review summarizes important issues raised during a satellite session at the first HIV R4P conference, held in Cape Town, on October 31, 2014. We explore key STIs that are challenging public health today; new biomedical prevention approaches including multipurpose prevention technologies (MPTs); and the scientific and regulatory hurdles that must be overcome to make combination prevention tools a reality. PMID:25759332

Toward Large-Area Sub-Arcsecond X-Ray Telescopes

NASA Technical Reports Server (NTRS)

O'Dell, Stephen L.; Aldcroft, Thomas L.; Allured, Ryan; Atkins, Carolyn; Burrows, David N.; Cao, Jian; Chalifoux, Brandon D.; Chan, Kai-Wing; Cotroneo, Vincenzo; Elsner, Ronald F.;

From a lunar outpost to Mars - Science, policy and the U.S. Space Exploration Initiative

NASA Technical Reports Server (NTRS)

Pilcher, Carl B.

1992-01-01

The technological developments required for the Space Exploration Initiative (SEI) objectives are discussed in terms of scientific investigation and present U.S. space policy. The results of the 90-Day Study are listed which include explicit suggestions for the successful exploration of the moon and Mars. The Outreach/Synthesis program is described which provides four methods for eliciting ideas, technologies, and research venues for lunar and Martian missions. The results of the studies include 5 scientific objectives such as the relationship between the sun, planetary atmospheres, and climate. The protection of human life from potential extraterrestrial hazards such as radiation is also found to be a key objective of SEI as are the theoretical and practical issues of scientific research.

Nuclear Materials Focus Area Fiscal Year 2002 Mid Year Review

DOE Office of Scientific and Technical Information (OSTI.GOV)

Thiel, Elizabeth Chilcote

2002-05-01

The Nuclear Materials Focus Area (NMFA) held its annual mid-year review on February 12 and 14, 2002, in Santa Fe, New Mexico. The purpose of this review was to examine both the technical aspects and the programmatic aspects of its technology development program. The focus area activities were reviewed by a panel consisting of personnel representing the end users of the technologies, and technical experts in nuclear materials. This year's review was somewhat different than in the past, as the stress was on how well the various projects being managed through the NMFA aligned with the two thrust areas andmore » nine key goals and priorities recently issued by the Deputy Assistant Secretary for DOE's Office of Environmental Management (EM).« less

Nuclear Materials Focus Area Fiscal Year 2002 Mid Year Review

DOE Office of Scientific and Technical Information (OSTI.GOV)

Thiel, E.C.; Fuhrman, P.W.

2002-05-30

The Nuclear Materials Focus Area (NMFA) held its annual mid-year review on February 12 and 14, 2002, in Santa Fe, New Mexico. The purpose of this review was to examine both the technical aspects and the programmatic aspects of its technology development program. The focus area activities were reviewed by a panel consisting of personnel representing the end users of the technologies, and technical experts in nuclear materials. This year's review was somewhat different than in the past, as the stress was on how well the various projects being managed through the NMFA aligned with the two thrust areas andmore » nine key goals and priorities recently issued by the Deputy Assistant Secretary for DOE's Office of Environmental Management (EM).« less

Recent Advancements towards Full-System Microfluidics

PubMed Central

Miled, Amine

2017-01-01

Microfluidics is quickly becoming a key technology in an expanding range of fields, such as medical sciences, biosensing, bioactuation, chemical synthesis, and more. This is helping its transformation from a promising R&D tool to commercially viable technology. Fuelling this expansion is the intensified focus on automation and enhanced functionality through integration of complex electrical control, mechanical properties, in situ sensing and flow control. Here we highlight recent contributions to the Sensors Special Issue series called “Microfluidics-Based Microsystem Integration Research” under the following categories: (i) Device fabrication to support complex functionality; (ii) New methods for flow control and mixing; (iii) Towards routine analysis and point of care applications; (iv) In situ characterization; and (v) Plug and play microfluidics. PMID:28757587

University students as recipients of and contributors to information on climate change: insights from South Africa and implications for well-being.

PubMed

El Zoghbi, Mona Betour; El Ansari, Walid

2014-06-01

This study aimed to enhance the in-depth understanding of the contextual dimensions that shape the relationships between climate change communication approach and youth well-being. The study focused on university students who constitute the key stakeholders and future decision-makers and leaders for managing the long-term climate risks. A total of 10 focus group interviews were conducted with 117 undergraduate and graduate South African university students from over 12 universities located in different provinces of South Africa. In addition, another 16 interviews were also undertaken with university students, 10 interviews with key experts, and 3 youth national events were attended as participant-observation. As recipients of information on climate change, students' well-being was negatively affected by the media's pessimism of communicating risks and the inadequate or restricted networking of communicating solutions and strategies. As contributors to information on climate change, students faced key barriers to their efficacy and agency that entailed socio-cultural inequalities (e.g. race and language) and a lack of formal forums for community recognition, policy consultation and collaboration. In addition, for some students (e.g. journalism students), the lack of sufficient knowledge and skills on climate change and sustainability issues limited their ability to effectively communicate these issues to their audience. Platforms for interactive and reflective discussions, access to innovative technologies and social media, and opportunities for multi-stakeholder partnerships are keys to the success of youth-targeted and youth-initiated communication on climate change.

How Can We Mobilize Action to Realize UHC in Asia?

PubMed

Akaza, Hideyuki; Kawahara, Norie; Fukuda, Takashi; Horie, Shigeo; Thabrany, Hasbullah; Nozaki, Shinjiro

2017-11-26

The 2016 World Cancer Congress, organised by UICC, was held in Paris in November 2016, under the theme “Mobilizing action – Inspiring Change.” As part of Track 4 presentations on the theme of “Strengthening cancer control: optimizing outcomes of health systems,” UICC-Asian Regional Office (UICC-ARO) held a symposium to discuss the issue of mobilizing action to realize UHC in Asia. Introducing the symposium, Hideyuki Akaza noted that universal health coverage (UHC) is included in the Sustainable Development Goals and one of the key issues for achieving UHC will be how to balance patient needs with the economic burden of cancer. Speakers from Japan and Indonesia addressed various issues, including the current status and challenges for medical economic evaluation in Asia, the importance of resource stratification, prospects for precision medicine, and the outlook for cancer control and UHC in developing and emerging countries in Asia. Key issues raised included how to respond to the rising costs of treating cancer as new and increasingly expensive drugs come to the market. Speakers and participants noted that health technology assessment programs are being developed around Asia in order to evaluate the cost-effectiveness of drugs in the face of budgetary constraints within increasingly pressurized national health systems. The importance of screening and early detection was also noted as effective means that have the potential to reduce reliance on expensive drugs for advanced cancers. The symposium was chaired jointly by Hideyuki Akaza and Shinjiro Nozaki (WHO Kobe Centre). Creative Commons Attribution License

Liquid lithium loop system to solve challenging technology issues for fusion power plant

DOE PAGES

Ono, Masayuki; Majeski, Richard P.; Jaworski, Michael A.; ...

2017-07-12

Here, steady-state fusion power plant designs present major divertor technology challenges, including high divertor heat flux both in steady-state and during transients. In addition to these concerns, there are the unresolved technology issues of long term dust accumulation and associated tritium inventory and safety issues. It has been suggested that radiation-based liquid lithium (LL) divertor concepts with a modest lithium-loop could provide a possible solution for these outstanding fusion reactor technology issues, while potentially improving reactor plasma performance. The application of lithium (Li) in NSTX resulted in improved H-mode confinement, H-mode power threshold reduction, and reduction in the divertor peakmore » heat flux while maintaining essentially Li-free core plasma operation even during H-modes. These promising results in NSTX and related modeling calculations motivated the radiative liquid lithium divertor (RLLD) concept and its variant, the active liquid lithium divertor concept (ARLLD), taking advantage of the enhanced or non-coronal Li radiation in relatively poorly confined divertor plasmas. To maintain the LL purity in a 1 GW-electric class fusion power plant, a closed LL loop system with a modest circulating capacity of ~ 1 liter/second (l/sec) is envisioned. We examined two key technology issues: 1) dust or solid particle removal and 2) real time recovery of tritium from LL while keeping the tritium inventory level to an acceptable level. By running the LL-loop continuously, it can carry the dust particles and impurities generated in the vacuum vessel to the outside where the dust / impurities can be removed by relatively simple dust filter, cold trap and/or centrifugal separation systems. With ~ 1 l/sec LL flow, even a small 0.1% dust content by weight (or 0.5 g per sec) suggests that the LL-loop could carry away nearly 16 tons of dust per year. In a 1 GW-electric (or ~ 3 GW fusion power) fusion power plant, about 0.5 g / sec of tritium is needed to maintain the fusion fuel cycle assuming ~ 1 % fusion burn efficiency. It appears feasible to recover tritium (T) in real time from LL while maintaining an acceptable T inventory level. Laboratory tests are being conducted to investigate T recovery feasibility with the surface cold trap (SCT) concept.« less

Liquid lithium loop system to solve challenging technology issues for fusion power plant

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ono, Masayuki; Majeski, Richard P.; Jaworski, Michael A.

Here, steady-state fusion power plant designs present major divertor technology challenges, including high divertor heat flux both in steady-state and during transients. In addition to these concerns, there are the unresolved technology issues of long term dust accumulation and associated tritium inventory and safety issues. It has been suggested that radiation-based liquid lithium (LL) divertor concepts with a modest lithium-loop could provide a possible solution for these outstanding fusion reactor technology issues, while potentially improving reactor plasma performance. The application of lithium (Li) in NSTX resulted in improved H-mode confinement, H-mode power threshold reduction, and reduction in the divertor peakmore » heat flux while maintaining essentially Li-free core plasma operation even during H-modes. These promising results in NSTX and related modeling calculations motivated the radiative liquid lithium divertor (RLLD) concept and its variant, the active liquid lithium divertor concept (ARLLD), taking advantage of the enhanced or non-coronal Li radiation in relatively poorly confined divertor plasmas. To maintain the LL purity in a 1 GW-electric class fusion power plant, a closed LL loop system with a modest circulating capacity of ~ 1 liter/second (l/sec) is envisioned. We examined two key technology issues: 1) dust or solid particle removal and 2) real time recovery of tritium from LL while keeping the tritium inventory level to an acceptable level. By running the LL-loop continuously, it can carry the dust particles and impurities generated in the vacuum vessel to the outside where the dust / impurities can be removed by relatively simple dust filter, cold trap and/or centrifugal separation systems. With ~ 1 l/sec LL flow, even a small 0.1% dust content by weight (or 0.5 g per sec) suggests that the LL-loop could carry away nearly 16 tons of dust per year. In a 1 GW-electric (or ~ 3 GW fusion power) fusion power plant, about 0.5 g / sec of tritium is needed to maintain the fusion fuel cycle assuming ~ 1 % fusion burn efficiency. It appears feasible to recover tritium (T) in real time from LL while maintaining an acceptable T inventory level. Laboratory tests are being conducted to investigate T recovery feasibility with the surface cold trap (SCT) concept.« less

Liquid lithium loop system to solve challenging technology issues for fusion power plant

NASA Astrophysics Data System (ADS)

Ono, M.; Majeski, R.; Jaworski, M. A.; Hirooka, Y.; Kaita, R.; Gray, T. K.; Maingi, R.; Skinner, C. H.; Christenson, M.; Ruzic, D. N.

2017-11-01

Steady-state fusion power plant designs present major divertor technology challenges, including high divertor heat flux both in steady-state and during transients. In addition to these concerns, there are the unresolved technology issues of long term dust accumulation and associated tritium inventory and safety issues. It has been suggested that radiation-based liquid lithium (LL) divertor concepts with a modest lithium-loop could provide a possible solution for these outstanding fusion reactor technology issues, while potentially improving reactor plasma performance. The application of lithium (Li) in NSTX resulted in improved H-mode confinement, H-mode power threshold reduction, and reduction in the divertor peak heat flux while maintaining essentially Li-free core plasma operation even during H-modes. These promising results in NSTX and related modeling calculations motivated the radiative liquid lithium divertor concept and its variant, the active liquid lithium divertor concept, taking advantage of the enhanced or non-coronal Li radiation in relatively poorly confined divertor plasmas. To maintain the LL purity in a 1 GW-electric class fusion power plant, a closed LL loop system with a modest circulating capacity of ~1 l s-1 is envisioned. We examined two key technology issues: (1) dust or solid particle removal and (2) real time recovery of tritium from LL while keeping the tritium inventory level to an acceptable level. By running the LL-loop continuously, it can carry the dust particles and impurities generated in the vacuum vessel to the outside where the dust/impurities can be removed by relatively simple dust filter, cold trap and/or centrifugal separation systems. With ~1 l s-1 LL flow, even a small 0.1% dust content by weight (or 0.5 g s-1) suggests that the LL-loop could carry away nearly 16 tons of dust per year. In a 1 GW-electric (or ~3 GW fusion power) fusion power plant, about 0.5 g s-1 of tritium is needed to maintain the fusion fuel cycle assuming ~1% fusion burn efficiency. It appears feasible to recover tritium (T) in real time from LL while maintaining an acceptable T inventory level. Laboratory tests are being conducted to investigate T recovery feasibility with the surface cold trap concept.

Ethical, legal, and social issues in health technology assessment for prenatal/preconceptional and newborn screening: a workshop report.

PubMed

Potter, B K; Avard, D; Entwistle, V; Kennedy, C; Chakraborty, P; McGuire, M; Wilson, B J

2009-01-01

Prenatal/preconceptional and newborn screening programs have been a focus of recent policy debates that have included attention to ethical, legal, and social issues (ELSIs). In parallel, there has been an ongoing discussion about whether and how ELSIs may be addressed in health technology assessment (HTA). We conducted a knowledge synthesis study to explore both guidance and current practice regarding the consideration of ELSIs in HTA for prenatal/preconceptional and newborn screening. As the concluding activity for this project, we held a Canadian workshop to discuss the issues with a diverse group of stakeholders. Based on key workshop themes integrated with our study results, we suggest that population-based genetic screening programs may present particular types of ELSIs and that a public health ethics perspective is potentially highly relevant when considering them. We also suggest that approaches to addressing ELSIs in HTA for prenatal/preconceptional and newborn screening may need to be flexible enough to respond to diversity in HTA organizations, cultural values, stakeholder communities, and contextual factors. Finally, we highlight a need for transparency in the way that HTA producers move from evidence to conclusions and the ways in which screening policy decisions are made. Copyright © 2008 S. Karger AG, Basel.

Ethical, Legal, and Social Issues in Health Technology Assessment for Prenatal/Preconceptional and Newborn Screening: A Workshop Report

PubMed Central

Potter, B.K.; Avard, D.; Entwistle, V.; Kennedy, C.; Chakraborty, P.; McGuire, M.; Wilson, B.J.

2008-01-01

Prenatal/preconceptional and newborn screening programs have been a focus of recent policy debates that have included attention to ethical, legal, and social issues (ELSIs). In parallel, there has been an ongoing discussion about whether and how ELSIs may be addressed in health technology assessment (HTA). We conducted a knowledge synthesis study to explore both guidance and current practice regarding the consideration of ELSIs in HTA for prenatal/preconceptional and newborn screening. As the concluding activity for this project, we held a Canadian workshop to discuss the issues with a diverse group of stakeholders. Based on key workshop themes integrated with our study results, we suggest that population-based genetic screening programs may present particular types of ELSIs and that a public health ethics perspective is potentially highly relevant when considering them. We also suggest that approaches to addressing ELSIs in HTA for prenatal/preconceptional and newborn screening may need to be flexible enough to respond to diversity in HTA organizations, cultural values, stakeholder communities, and contextual factors. Finally, we highlight a need for transparency in the way that HTA producers move from evidence to conclusions and the ways in which screening policy decisions are made. PMID:19023190

Single-nm resolution approach by applying DDRP and DDRM

NASA Astrophysics Data System (ADS)

Shibayama, Wataru; Shigaki, Shuhei; Takeda, Satoshi; Nakajima, Makoto; Sakamoto, Rikimaru

2017-03-01

EUV lithography has been desired as the leading technology for 1x or single nm half-pitch patterning. However, the source power, masks and resist materials still have critical issues for mass production. Especially in resist materials, RLS trade-off has been the key issue. To overcome this issue, we are suggesting Dry Development Rinse Process (DDRP) and Materials (DDRM) as the pattern collapse mitigation approach. This DDRM can perform not only as pattern collapse free materials for fine pitch, but also as the etching hard mask against bottom layer (spin on carbon : SOC). In this paper, we especially propose new approaches to achieve high resolution around hp1X nm L/S and single nm line patterning. Especially, semi iso 8nm line was successfully achieved with good LWR (2.5nm) and around 3 times aspect ratio. This single nm patterning technique also helped to enhance sensitivity about 33%. On the other hand, pillar patterning thorough CH pattern by applying DDRP also showed high resolution below 20nm pillar CD with good LCDU and high sensitivity. This new DDRP technology can be the promising approach not only for hp1Xnm level patterning but also single nm patterning in N7/N5 and beyond.

Model-based assist feature insertion for sub-40nm memory device

NASA Astrophysics Data System (ADS)

Suh, Sungsoo; Lee, Suk-joo; Choi, Seong-woon; Lee, Sung-Woo; Park, Chan-hoon

2009-04-01

Many issues need to be resolved for a production-worthy model based assist feature insertion flow for single and double exposure patterning process to extend low k1 process at 193 nm immersion technology. Model based assist feature insertion is not trivial to implement either for single and double exposure patterning compared to rule based methods. As shown in Fig. 1, pixel based mask inversion technology in itself has difficulties in mask writing and inspection although it presents as one of key technology to extend single exposure for contact layer. Thus far, inversion technology is tried as a cooptimization of target mask to simultaneously generate optimized main and sub-resolution assists features for a desired process window. Alternatively, its technology can also be used to optimize for a target feature after an assist feature types are inserted in order to simplify the mask complexity. Simplification of inversion mask is one of major issue with applying inversion technology to device development even if a smaller mask feature can be fabricated since the mask writing time is also a major factor. As shown in Figure 2, mask writing time may be a limiting factor in determining whether or not an inversion solution is viable. It can be reasoned that increased number of shot counts relates to increase in margin for inversion methodology. On the other hand, there is a limit on how complex a mask can be in order to be production worthy. There is also source and mask co-optimization which influences the final mask patterns and assist feature sizes and positions for a given target. In this study, we will discuss assist feature insertion methods for sub 40-nm technology.

Electric and Hybrid Vehicle Technology: TOPTEC

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1992-12-01

Today, growing awareness of environmental and energy issues associated with the automobile has resulted in renewed interest in the electric vehicle. In recognition of this, the Society of Automotive Engineers has added a TOPTEC on electric vehicles to the series of technical symposia focused on key issues currently facing industry and government. This workshop on the Electric and Hybrid Vehicle provides an opportunity to learn about recent progress in these rapidly changing technologies. Research and development of both the vehicle and battery system has accelerated sharply and in fact, the improved technologies of the powertrain system make the performance ofmore » today`s electric vehicle quite comparable to the equivalent gasoline vehicle, with the exception of driving range between ``refueling`` stops. Also, since there is no tailpipe emission, the electric vehicle meets the definition of ``Zero Emission Vehicle: embodied in recent air quality regulations. The discussion forum will include a review of the advantages and limitations of electric vehicles, where the technologies are today and where they need to be in order to get to production level vehicles, and the service and maintenance requirements once they get to the road. There will be a major focus on the status of battery technologies, the various approaches to recharge of the battery systems and the activities currently underway for developing standards throughout the vehicle and infrastructure system. Intermingled in all of this technology discussion will be a view of the new relationships emerging between the auto industry, the utilities, and government. Since the electric vehicle and its support system will be the most radical change ever introduced into the private vehicle sector of the transportation system, success in the market requires an understanding of the role of all of the partners, as well as the new technologies involved.« less

Electric and Hybrid Vehicle Technology: TOPTEC

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1992-01-01

Today, growing awareness of environmental and energy issues associated with the automobile has resulted in renewed interest in the electric vehicle. In recognition of this, the Society of Automotive Engineers has added a TOPTEC on electric vehicles to the series of technical symposia focused on key issues currently facing industry and government. This workshop on the Electric and Hybrid Vehicle provides an opportunity to learn about recent progress in these rapidly changing technologies. Research and development of both the vehicle and battery system has accelerated sharply and in fact, the improved technologies of the powertrain system make the performance ofmore » today's electric vehicle quite comparable to the equivalent gasoline vehicle, with the exception of driving range between refueling'' stops. Also, since there is no tailpipe emission, the electric vehicle meets the definition of Zero Emission Vehicle: embodied in recent air quality regulations. The discussion forum will include a review of the advantages and limitations of electric vehicles, where the technologies are today and where they need to be in order to get to production level vehicles, and the service and maintenance requirements once they get to the road. There will be a major focus on the status of battery technologies, the various approaches to recharge of the battery systems and the activities currently underway for developing standards throughout the vehicle and infrastructure system. Intermingled in all of this technology discussion will be a view of the new relationships emerging between the auto industry, the utilities, and government. Since the electric vehicle and its support system will be the most radical change ever introduced into the private vehicle sector of the transportation system, success in the market requires an understanding of the role of all of the partners, as well as the new technologies involved.« less

Electric and hybrid vehicle technology: TOPTEC

NASA Astrophysics Data System (ADS)

Today, growing awareness of environmental and energy issues associated with the automobile has resulted in renewed interest in the electric vehicle. In recognition of this, the Society of Automotive Engineers has added a TOPTEC on electric vehicles to the series of technical symposia focused on key issues currently facing industry and government. This workshop on the Electric and Hybrid Vehicle provides an opportunity to learn about recent progress in these rapidly changing technologies. Research and development of both the vehicle and battery system has accelerated sharply and in fact, the improved technologies of the powertrain system make the performance of today's electric vehicle quite comparable to the equivalent gasoline vehicle, with the exception of driving range between 'refueling' stops. Also, since there is no tailpipe emission, the electric vehicle meets the definition of 'Zero Emission Vehicle: embodied in recent air quality regulations. The discussion forum will include a review of the advantages and limitations of electric vehicles, where the technologies are today and where they need to be in order to get to production level vehicles, and the service and maintenance requirements once they get to the road. There will be a major focus on the status of battery technologies, the various approaches to recharge of the battery systems and the activities currently underway for developing standards throughout the vehicle and infrastructure system. Intermingled in all of this technology discussion will be a view of the new relationships emerging between the auto industry, the utilities, and government. Since the electric vehicle and its support system will be the most radical change ever introduced into the private vehicle sector of the transportation system, success in the market requires an understanding of the role of all of the partners, as well as the new technologies involved.

Closedure - Mine Closure Technologies Resource

NASA Astrophysics Data System (ADS)

Kauppila, Päivi; Kauppila, Tommi; Pasanen, Antti; Backnäs, Soile; Liisa Räisänen, Marja; Turunen, Kaisa; Karlsson, Teemu; Solismaa, Lauri; Hentinen, Kimmo

2015-04-01

Closure of mining operations is an essential part of the development of eco-efficient mining and the Green Mining concept in Finland to reduce the environmental footprint of mining. Closedure is a 2-year joint research project between Geological Survey of Finland and Technical Research Centre of Finland that aims at developing accessible tools and resources for planning, executing and monitoring mine closure. The main outcome of the Closedure project is an updatable wiki technology-based internet platform (http://mineclosure.gtk.fi) in which comprehensive guidance on the mine closure is provided and main methods and technologies related to mine closure are evaluated. Closedure also provides new data on the key issues of mine closure, such as performance of passive water treatment in Finland, applicability of test methods for evaluating cover structures for mining wastes, prediction of water effluents from mine wastes, and isotopic and geophysical methods to recognize contaminant transport paths in crystalline bedrock.

NASA/industry advanced turboprop technology program

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ziemianski, J.A.; Whitlow, J.B. Jr.

1988-01-01

Experimental and analytical effort shows that use of advanced turboprop (propfan) propulsion instead of conventional turbofans in the older narrow-body airline fleet could reduce fuel consumption for this type of aircraft by up to 50 percent. The NASA Advanced Turboprop (ATP) program was formulated to address the key technologies required for these thin, swept-blade propeller concepts. A NASA, industry, and university team was assembled to develop and validate applicable design codes and prove by ground and flight test the viability of these propeller concepts. Some of the history of the ATP project, an overview of some of the issues, andmore » a summary of the technology developed to make advanced propellers viable in the high-subsonic cruise speed application are presented. The ATP program was awarded the prestigious Robert J. Collier Trophy for the greatest achievement in aeronautics and astronautics in America in 1987.« less

Technology Development for a Stirling Radioisotope Power System for Deep Space Missions

NASA Technical Reports Server (NTRS)

Thieme, Lanny G.; Qiu, Songgang; White, Maurice A.

2000-01-01

NASA Glenn Research Center and the Department of Energy (DOE) are developing a Stirling convertor for an advanced radioisotope power system to provide spacecraft on-board electric power for NASA deep space missions. NASA Glenn is addressing key technology issues through the use of two NASA Phase 2 SBIRs with Stirling Technology Company (STC) of Kennewick, WA. Under the first SBIR, STC demonstrated a 40 to 50 fold reduction in vibrations, compared to an unbalanced convertor, with a synchronous connection of two thermodynamically independent free-piston Stirling convertors. The second SBIR is for the development of an Adaptive Vibration Reduction System (AVRS) that will essentially eliminate vibrations over a mission lifetime, even in the unlikely event of a failed convertor. This paper discusses the status and results for these two SBIR projects and also presents results for characterizing the friction factor of high-porosity random fiber regenerators that are being used for this application.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Black, Billy D.; Akhil, Abbas Ali

This is the final report on a field evaluation by the Department of the Navy of twenty 5-kW PEM fuel cells carried out during 2004 and 2005 at five Navy sites located in New York, California, and Hawaii. The key objective of the effort was to obtain an engineering assessment of their military applications. Particular issues of interest were fuel cell cost, performance, reliability, and the readiness of commercial fuel cells for use as a standalone (grid-independent) power option. Two corollary objectives of the demonstration were to promote technological advances and to improve fuel performance and reliability. From a costmore » perspective, the capital cost of PEM fuel cells at this stage of their development is high compared to other power generation technologies. Sandia National Laboratories technical recommendation to the Navy is to remain involved in evaluating successive generations of this technology, particularly in locations with greater environmental extremes, and it encourages their increased use by the Navy.« less