Style in knitted textiles and fashion

NASA Astrophysics Data System (ADS)

Štemberger, M.; Pavko-Čuden, A.

2017-10-01

The presented research relates the basic elements of the art theory with the concept of style and fashion design. The objective of the research was to determine how style is manifested in knitting in different periods of fashion seasons. The collections of three designers were compared: Missoni, Issey Miyake and Sonia Rykiel, in four different seasons in three different years. The basic artistic elements used in the presented research were: point, line, light-dark and colour together with syntactic rules. A combination of different elements and syntactic rules refers to different artistic languages, which have their own artistic grammar, i.e. a different style. All three investigated fashion designers used knitting in their collections as a significant element which defined their style. Different knitting technologies as well as different yarns made of synthetic or natural fibres in all colour spectra significantly influence the surface of a knitted fabric. Even when the technology is the same, the use of different materials, structures, colours, etc. creates various unique surfaces. The method used in the presented research was a style matrix which is developed from the axiomatic system. Only the part dealing with the language of fine arts and the pictorial speech - the style of a certain designer and a certain work of art/knitted fabric was used. After the selected three designers were examined through all the periods, it was concluded that each designer can be characterised by his own style. Despite the influencing fashion trends, all the compared designers still retained their own style, their own techniques, their own inspirations.

Study on magnetic force of electromagnetic levitation circular knitting machine

NASA Astrophysics Data System (ADS)

Wu, X. G.; Zhang, C.; Xu, X. S.; Zhang, J. G.; Yan, N.; Zhang, G. Z.

2018-06-01

The structure of the driving coil and the electromagnetic force of the test prototype of electromagnetic-levitation (EL) circular knitting machine are studied. In this paper, the driving coil’s structure and working principle of the EL circular knitting machine are firstly introduced, then the mathematical modelling analysis of the driving electromagnetic force is carried out, and through the Ansoft Maxwell finite element simulation software the coil’s magnetic induction intensity and the needle’s electromagnetic force is simulated, finally an experimental platform is built to measure the coil’s magnetic induction intensity and the needle’s electromagnetic force. The results show that the theoretical analysis, the simulation analysis and the results of the test are very close, which proves the correctness of the proposed model.

Tactile Comfort Evaluation of Conductive Knitted Fabric Using KES-FB

NASA Astrophysics Data System (ADS)

Tadesse, M. G.; Chen, Y.; Wang, L.; Nierstrasz, V.; Loghin, C.

2018-06-01

Tactile comfort has a strong relation with low-stress mechanical properties of textile fabrics having close contact with the human skin. In this work, we attempt to analyse the low-stress mechanical properties of the functional knitted fabric obtained using Kawabata’s fabric evaluation system (KES-FB). The measured results were compared with those of the controlled polyester fabric. The bending ability of the product increased from 0.2448 to 0.8010gf.cm2/cm and hence the rigidity influenced when copper yarn is introduced. However, the compressibility increased from 0.173 to 0.449gf.cm/cm2 and hence the compressibility slightly boosted. The surface roughness (SMD) highly increased from 7.196 to 14.258 μm. It was observed that the incorporation of conductive copper yarn during knitting brought an effect on the tactile comfort of the fabrics and reduced by 69%. The overall comfort properties of the conductive textile fabric were reduced due to the introduction of copper yarn during knitting operations. Focus should be given when functional fabric developed which has close contact to the human skin.

Thermo-Mechanical Behavior of Textile Heating Fabric Based on Silver Coated Polymeric Yarn

PubMed Central

Hamdani, Syed Talha Ali; Potluri, Prasad; Fernando, Anura

2013-01-01

This paper presents a study conducted on the thermo-mechanical properties of knitted structures, the methods of manufacture, effect of contact pressure at the structural binding points, on the degree of heating. The test results also present the level of heating produced as a function of the separation between the supply terminals. The study further investigates the rate of heating and cooling of the knitted structures. The work also presents the decay of heating properties of the yarn due to overheating. Thermal images were taken to study the heat distribution over the surface of the knitted fabric. A tensile tester having constant rate of extension was used to stretch the fabric. The behavior of temperature profile of stretched fabric was observed. A comparison of heat generation by plain, rib and interlock structures was studied. It was observed from the series of experiments that there is a minimum threshold force of contact at binding points of a knitted structure is required to pass the electricity. Once this force is achieved, stretching the fabric does not affect the amount of heat produced. PMID:28809358

Legitimate Fidgeting: Knitting with Kids

ERIC Educational Resources Information Center

Austen, Judith

2006-01-01

In this article, the author relates how she learned knitting and how she taught this craft to her own students. She learned knitting at the age of 40. After learning how to knit, she introduced the craft to her students as part of the art curriculum at Shady Hill School. She realized how knitting not only promotes intimacy, but it also helps…

Aspects of the dimensional changes of jersey structures after knitting process

NASA Astrophysics Data System (ADS)

Szabo, M.; Barbu, I.; Jiaru, L.

2017-08-01

The study proposes a statistical analysis by applying a mathematical model for the study of the dimensional changes of jersey structures made of 100% cotton yarn, with 58/1 metric count of yarn. The Structures are presented as tubular knitted metrage and are designed for underwear and/or outer garments. By analysing the jersey structures, from dimensional stability point of view, there can be observed that values in the limits are within the ±2% interval, values which are considered appropriate. Following the experimental researches, there are proposed solutions for the reduction of dimensional changes on both directions of the knit, on the stich course direction and also on the stich courses in vertical direction, being analyzed the behaviour of the knitted fabrics during relaxation after knitting process. The problem of the dimensional stability of the knitted fabrics is extensive researched. The knitted structures are elastic structures, this being a reason for which dimensional stability will always be a topical theme. The jersey structures, due to the distribution of the platinum loop in the knit plane, due to the relative small number of yarn-yarn contact points that causes the threads to slide into the structure, due to the spiral of the tubular metrage structure, are among those whose dimensional stability is difficult to control. The technical characteristics of the yarns, the technical characteristics of the knitting machines and the technological parameters of the knitting machine are the elements which will be correlated in order to obtain structures with minimum dimensional changes. In order to obtain knitted structures with adequate dimensional stability, this means within ±2%, it is necessary that the dimensional changes during the relaxation periods after knitting and chemical finishing being minimum. For this, all the processes to be applied will be conducted with appropriate and uniform tensions throughout the technological flow. The relaxation periods of 72 hours should be strictly respected, folded and under standard atmospheric conditions, both after knitting and after chemical finishing. The jersey structures are plane structured made on knitting machines equiped with font. There will be analyzed the dimensional changes of the jersey structures made of 100% cotton yarn, Nm 58/1, after the relaxation after knitting process througout the corelation between the technical characteristics of the yarns, of the technological parameter of the knitting operation and of some technical characteristici of the knitting machine.

Data on kilometer scale production of stretchable conductive multifilaments enables knitting wearable strain sensing textiles.

PubMed

Seyedin, Shayan; Moradi, Sepehr; Singh, Charanpreet; Razal, Joselito M

2018-06-01

This data article contains analyzed data for the article "Continuous Production of Stretchable Conductive Multifilaments in Kilometer Scale Enables Facile Knitting of Wearable Strain Sensing Textiles" (Seyedin et al., 2018) [1]. Details of wet-spinning conditions to achieve scaled-up production of stretchable and conducting polyurethane/poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PU/PEDOT:PSS) multifilaments are provided. The stress-strain curves for tensile and stretch-relaxation tests on the multifilament and different knitted textile structures (plain-knit, co-knit, co-knit-alternate, co-knit with conductive stitch, and plain with non-conductive stitch) are presented. It is shown that the PU/PEDOT:PSS multifilaments can also be knitted into fabrics that when worn on various body parts, such as knee, elbow, and finger, can monitor their various movements.

Knitted Strain Sensor Textiles of Highly Conductive All-Polymeric Fibers.

PubMed

Seyedin, Shayan; Razal, Joselito M; Innis, Peter C; Jeiranikhameneh, Ali; Beirne, Stephen; Wallace, Gordon G

2015-09-30

A scaled-up fiber wet-spinning production of electrically conductive and highly stretchable PU/PEDOT:PSS fibers is demonstrated for the first time. The PU/PEDOT:PSS fibers possess the mechanical properties appropriate for knitting various textile structures. The knitted textiles exhibit strain sensing properties that were dependent upon the number of PU/PEDOT:PSS fibers used in knitting. The knitted textiles show sensitivity (as measured by the gauge factor) that increases with the number of PU/PEDOT:PSS fibers deployed. A highly stable sensor response was observed when four PU/PEDOT:PSS fibers were co-knitted with a commercial Spandex yarn. The knitted textile sensor can distinguish different magnitudes of applied strain with cyclically repeatable sensor responses at applied strains of up to 160%. When used in conjunction with a commercial wireless transmitter, the knitted textile responded well to the magnitude of bending deformations, demonstrating potential for remote strain sensing applications. The feasibility of an all-polymeric knitted textile wearable strain sensor was demonstrated in a knee sleeve prototype with application in personal training and rehabilitation following injury.

Comfort and microbial barrier properties of garments worn next to the skin

NASA Astrophysics Data System (ADS)

Kopitar, D.; Rogina-Car, B.; Skenderi, Z.

2017-10-01

Compared with viscose fibre, modal fibre is characterized by some advantageous properties such as higher dry and wet tenacities, higher wet modulus, lower water retention capacity and lower level of swelling. Impact of different knitted fabric structure made of cotton and 97 % CMD/3 % EL fibres on thermo-physiological comfort and microbial barrier properties were investigated. All knitted fabrics have very good physiological properties. The microbial barrier permeability of knitted fabric after extreme contamination with bacterial spores in dry state showed that double jersey offered more effective microbial barrier than the single jersey knitted fabrics respectively the greater thickness of double jersey knitted fabric provide more difficult barrier to bacterial spores to pass. In wet state all knitted fabrics have more effective microbial barrier which could be explained by cellulose fibres swelling. In wet state 97 % CMD/3 % EL single jersey knitted fabric have more effective microbial barrier then cotton double and single jersey knitted fabrics.

40 CFR 410.50 - Applicability; description of the knit fabric finishing subcategory.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 40 Protection of Environment 29 2011-07-01 2009-07-01 true Applicability; description of the knit... AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS TEXTILE MILLS POINT SOURCE CATEGORY Knit Fabric Finishing Subcategory § 410.50 Applicability; description of the knit fabric finishing subcategory. The...

Energy harvesting “3-D knitted spacer” based piezoelectric textiles

NASA Astrophysics Data System (ADS)

Anand, S.; Soin, N.; Shah, T. H.; Siores, E.

2016-07-01

The piezoelectric effect in Poly(vinylidene fluoride), PVDF, was discovered over four decades ago and since then, significant work has been carried out aiming at the production of high p-phase fibres and their integration into fabric structures for energy harvesting. However, little work has been done in the area of production of “true piezoelectric fabric structures” based on flexible polymeric materials such as PVDF. In this work, we demonstrate “3-D knitted spacer” technology based all-fibre piezoelectric fabrics as power generators and energy harvesters. The knitted single-structure piezoelectric generator consists of high p-phase (~80%) piezoelectric PVDF monofilaments as the spacer yarn interconnected between silver (Ag) coated polyamide multifilament yarn layers acting as the top and bottom electrodes. The novel and unique textile structure provides an output power density in the range of 1.105.10 gWcm-2 at applied impact pressures in the range of 0.02-0.10 MPa, thus providing significantly higher power outputs and efficiencies over the existing 2-D woven and nonwoven piezoelectric structures. The high energy efficiency, mechanical durability and comfort of the soft, flexible and all-fibre based power generator is highly attractive for a variety of potential applications such as wearable electronic systems and energy harvesters charged from ambient environment or by human movement.

Knitting: A Craft Makes a Comeback

ERIC Educational Resources Information Center

McIntosh, Phyllis

2011-01-01

Hand knitting is one of the most popular hobbies in the United States. Once considered the province of grannies and expectant mothers stitching layettes, knitting is enjoying a 21st century resurgence, especially among young people. Knitting, it turns out, is a trendy, often eco-friendly pastime with a wide range of appeals. And, thanks to the…

Non-destructive X-ray examination of weft knitted wire structures

NASA Astrophysics Data System (ADS)

Obermann, M.; Ellouz, M.; Aumann, S.; Martens, Y.; Bartelt, P.; Klöcker, M.; Kordisch, T.; Ehrmann, A.; Weber, M. O.

2016-07-01

Conductive yarns or wires are often integrated in smart textiles to enable data or energy transmission. In woven fabrics, these conductive parts are fixed at defined positions and thus protected from external loads. Knitted fabrics, however, have relatively loose structures, resulting in higher impacts of possible mechanical forces on the individual yarns. Hence, metallic wires with smaller diameters in particular are prone to break when integrated in knitted fabrics. In a recent project, wires of various materials including copper, silver and nickel with diameters varying between 0.05 mm and 0.23 mm were knitted in combination with textile yarns. Hand flat knitting machines of appropriate gauges were used to produce different structures. On these samples, non-destructive examinations, using an industrial X-ray system Seifert x|cube (225 kV) equipped with a minifocus X-ray tube, were carried out, directly after knitting as well as after different mechanical treatments (tensile, burst, and washing tests). In this way, structural changes of the stitch geometry could be visualized before failure. In this paper, the loop geometries in the knitted fabrics are depicted depending on knitted structures, wire properties and the applied mechanical load. Consequently, it is shown which metallic wires and yarns are most suitable to be integrated into knitted smart textiles.

76 FR 30394 - St. John Knits, Inc. Irvine, CA; Amended Certification Regarding Eligibility To Apply for Worker...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-05-25

... DEPARTMENT OF LABOR Employment and Training Administration [TA-W-74,839] St. John Knits, Inc..., 2011, applicable to workers of St. John Knits, Inc., Irvine, California. The workers are engaged in the... adjustment assistance was issued for all workers of St. John Knits, Sample Manufacturing Department, Irvine...

76 FR 16447 - St. John Knits, Inc., Irvine, CA; Amended Certification Regarding Eligibility To Apply for Worker...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-03-23

... DEPARTMENT OF LABOR Employment and Training Administration [TA-W-74,839] St. John Knits, Inc..., 2011, applicable to workers of St. John Knits, Inc., Irvine, California. The workers are engaged in the... adjustment assistance was issued for all workers of St. John Knits, Sample Manufacturing Department, Irvine...

The research of knitting needle status monitoring setup

NASA Astrophysics Data System (ADS)

Liu, Lu; Liao, Xiao-qing; Zhu, Yong-kang; Yang, Wei; Zhang, Pei; Zhao, Yong-kai; Huang, Hui-jie

2013-09-01

In textile production, quality control and testing is the key to ensure the process and improve the efficiency. Defect of the knitting needles is the main factor affecting the quality of the appearance of textiles. Defect detection method based on machine vision and image processing technology is universal. This approach does not effectively identify the defect generated by damaged knitting needles and raise the alarm. We developed a knitting needle status monitoring setup using optical imaging, photoelectric detection and weak signal processing technology to achieve real-time monitoring of weaving needles' position. Depending on the shape of the knitting needle, we designed a kind of Glass Optical Fiber (GOF) light guides with a rectangular port used for transmission of the signal light. To be able to capture the signal of knitting needles accurately, we adopt a optical 4F system which has better imaging quality and simple structure and there is a rectangle image on the focal plane after the system. When a knitting needle passes through position of the rectangle image, the reflected light from needle surface will back to the GOF light guides along the same optical system. According to the intensity of signals, the computer control unit distinguish that the knitting needle is broken or curving. The experimental results show that this system can accurately detect the broken needles and the curving needles on the knitting machine in operating condition.

A Study on Ultraviolet Protection of 100% Cotton Knitted Fabric: Effect of Fabric Parameters

PubMed Central

Kan, C. W.

2014-01-01

The effect of fabric parameters such as weight, thickness, and stitch density on the ultraviolet (UV) protection of knitted fabrics was studied. Different knitting structures such as plain, pineapple, lacoste, and other combinations of different knitting stitches of knit, tuck, and miss as well as half milano, full milano, half cardigan, full cardigan, 1 × 1 rib, and interlock were prepared. Experimental results revealed that weight was the most important factor that affected UV protection while thickness and stitch density were not the leading factor in determining UV protection. PMID:24955409

Outlook Tower.

ERIC Educational Resources Information Center

Cosgrave, Mary Silva

1979-01-01

Reviews eight new adult books of interest to high school readers. The books include biographies, works of fiction, and books about dragons, Cubism and Futurism in art, and designing, knitting, and crocheting clothes. (GT)

Moisture Management Behaviour of Knitted Fabric from Structurally Modified Ring and Vortex Spun Yarn

NASA Astrophysics Data System (ADS)

Sharma, Navendu; Kumar, Pawan; Bhatia, Dinesh; Sinha, Sujit Kumar

2016-10-01

The acceptability of a new product is decided by its performance, level of improvement in quality and economy of production. The basic aim of generating micro pores in a textile structure is to provide better thermo-physiological comfort by enhancing the breathability and hence improving moisture management behaviour. In the present study, an attempt has been made to create a relatively more open structure through removal of a component. A comparative assessment with a homogeneous and parent yarn was also made. Yarns of two linear densities, each from ring and vortex spinning systems were produced using 100 % polyester and 80:20 polyester/cotton blend. The modified yarn was produced by removing a component, viz; cotton, by treatment with sulphuric acid from the blended yarn. The knitted fabric from modified yarn was found to show significant improvement in air permeability, water vapour permeability and total absorbency while the wicking characteristic was found to decline.

New knitted fabric concepts for denim products

NASA Astrophysics Data System (ADS)

Marmaralı, A.; Ertekin, G.; Oğlakcıoğlu, N.; Kertmen, M.; Seçil Aydın, İ.

2017-10-01

“Denim” like knitted fabric is a new trend combining the appearance of woven denim with the knitted structures’ characteristics such as flexibility, softness, wrinkle resistance, user-friendliness, and comfortable. According to the requirements of markets, it can be obviously seen that, this fabric will be a new era for denim industry which can be competitive with woven denim garments. This study presents general information and literature survey about denim production, knitted denim structures and their characteristics.

29 CFR 530.1 - Definitions.

Code of Federal Regulations, 2014 CFR

2014-07-01

... knitting process is performed; and the manufacture of bathing suits from any purchased fabric: Provided... other finishing of knitted shirts made in the same establishment as that where the knitting process is... embroidery, thread splitting, embroidery thread cutting, scallop cutting, lace cutting, lace making-up...

29 CFR 530.1 - Definitions.

Code of Federal Regulations, 2013 CFR

2013-07-01

... knitting process is performed; and the manufacture of bathing suits from any purchased fabric: Provided... other finishing of knitted shirts made in the same establishment as that where the knitting process is... embroidery, thread splitting, embroidery thread cutting, scallop cutting, lace cutting, lace making-up...

29 CFR 530.1 - Definitions.

Code of Federal Regulations, 2011 CFR

2011-07-01

... knitting process is performed; and the manufacture of bathing suits from any purchased fabric: Provided... other finishing of knitted shirts made in the same establishment as that where the knitting process is... embroidery, thread splitting, embroidery thread cutting, scallop cutting, lace cutting, lace making-up...

29 CFR 530.1 - Definitions.

Code of Federal Regulations, 2012 CFR

2012-07-01

... knitting process is performed; and the manufacture of bathing suits from any purchased fabric: Provided... other finishing of knitted shirts made in the same establishment as that where the knitting process is... embroidery, thread splitting, embroidery thread cutting, scallop cutting, lace cutting, lace making-up...

Investigation of Comfort Properties of Knitted Denim

NASA Astrophysics Data System (ADS)

Akbar, Abdul R.; Su, Siwei; Khalid, Junaid; Cai, Yingjie; Lin, Lina

2017-12-01

Knitted denim was designed by using cross terry structure on circular knitting machine. Knitted denim looks like a denim fabric which has visual appearance like woven denim. Two type of cross terry structure 2/1 and 3/1 were used which gives twill effect with 2 and 3 floats respectively. Four types of materials, cotton, polyester, flax and polypropylene were used. With four materials and two structural combinations 8 samples were produced. Comfort properties of knitted denim including moisture management, air permeability, thermal, and bursting strength were tested. For checking the inherent anti-microbial property of materials anti-microbial test was also applied. Samples containing flax and polyester were found with best results and not even a single sample was found anti-microbial.

General View of Kinckley Knitting Mill site, east end of ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

General View of Kinckley Knitting Mill site, east end of site along Wister Street, looking north, showing ruin of stone mill building and smoke stack of the Germantown Dyeworks in background - Hinckley Knitting Mills, 21-35 East Wister Street, Philadelphia, Philadelphia County, PA

40 CFR 410.52 - Effluent limitations representing the degree of effluent reduction attainable by the application...

Code of Federal Regulations, 2010 CFR

2010-07-01

... (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS TEXTILE MILLS POINT SOURCE CATEGORY Knit Fabric Finishing... attributable to the finishing of knit fabrics through simple manufacturing operations employing a natural and..., controlled by this section and attributable to the finishing of knit fabrics through complex manufacturing...

19 CFR 10.244 - Certificate of Origin.

Code of Federal Regulations, 2011 CFR

2011-04-01

... assembled from U.S. formed, dyed, printed and finished fabrics or fabric components, or U.S. formed knit-to... llama, alpaca or vicuña fabrics, fabric components, or knit-to-shape components, from Andean yarns 10... more yarns, fabrics, fabric components, or knit-to-shape components described in preference groups A...

40 CFR 410.52 - Effluent limitations representing the degree of effluent reduction attainable by the application...

Code of Federal Regulations, 2011 CFR

2011-07-01

... (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS TEXTILE MILLS POINT SOURCE CATEGORY Knit Fabric Finishing... attributable to the finishing of knit fabrics through simple manufacturing operations employing a natural and..., controlled by this section and attributable to the finishing of knit fabrics through complex manufacturing...

19 CFR 10.244 - Certificate of Origin.

Code of Federal Regulations, 2010 CFR

2010-04-01

... assembled from U.S. formed, dyed, printed and finished fabrics or fabric components, or U.S. formed knit-to... llama, alpaca or vicuña fabrics, fabric components, or knit-to-shape components, from Andean yarns 10... more yarns, fabrics, fabric components, or knit-to-shape components described in preference groups A...

78 FR 7414 - Determination Under the Textile and Apparel Commercial Availability Provision of the Dominican...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-02-01

... Agreements (``CITA'') has determined that certain cotton/polyester three-thread circular knit fleece fabric... behalf of Intradeco Apparel, Inc. for certain cotton/polyester three-thread circular knit fleece fabric.... Specifications: Certain Cotton/Polyester Three-Thread Circular Knit Fleece Fabric HTS: 6001.21 Fiber content...

Properties of honeycomb polyester knitted fabrics

NASA Astrophysics Data System (ADS)

Feng, A. F.

2016-07-01

The properties of honeycomb polyester weft-knitted fabrics were studied to understand their advantages. Seven honeycomb polyester weft-knitted fabrics and one common polyester weft-knitted fabric were selected for testing. Their bursting strengths, fuzzing and pilling, air permeability, abrasion resistance and moisture absorption and perspiration were studied. The results show that the honeycomb polyester weft-knitted fabrics have excellent moisture absorption and liberation. The smaller their thicknesses and area densities are, the better their moisture absorption and liberation will be. Their anti-fuzzing and anti-pilling is good, whereas their bursting strengths and abrasion resistance are poorer compared with common polyester fabric's. In order to improve the hygroscopic properties of the fabrics, the proportion of the honeycomb microporous structure modified polyester in the fabrics should not be less than 40%.

Case Study -- Improving Management Performance

ERIC Educational Resources Information Center

Stait, Norman

1970-01-01

The Knitting, Lace, and Net Industry Training Board in Great Britain is beginning to work with management training, using three firms for experimental pilot projects. The Board plans to introduce this management system throughout the industry. (MF)

"Knitting Nannas" and "Frackman": A Gender Analysis of Australian Anti-Coal Seam Gas Documentaries (CSG) and Implications for Environmental Adult Education

ERIC Educational Resources Information Center

Larri, Larraine J.; Newlands, Maxine

2017-01-01

"Frackman" ("FM") and "Knitting Nannas" ("KN") are two documentaries about the anti-coal seam gas movement in Australia. "Frackman" features a former construction worker turned eco-activist, Dayne Pratzky (DP), fighting coal seam gas extraction. "Knitting Nannas" follows a group of women…

19 CFR 10.844 - Value-content requirement.

Code of Federal Regulations, 2011 CFR

2011-04-01

... assembled or knit-to-shape in Haiti and are entered during the initial applicable one-year period (except as... assembled or knit-to-shape in Haiti and are entered during the preceding applicable one-year period (except... calculation. The entry of an apparel article that is wholly assembled or knit-to-shape in Haiti and is...

Knitted Patterns as a Model for Anisotropy

ERIC Educational Resources Information Center

Cepic, Mojca

2012-01-01

Anisotropy is a difficult concept, although it is often met in everyday life. This paper describes a simple model--knitted patterns--having anisotropic elastic properties. The elastic constant is measured for the force applied in different directions with respect to the knitting direction. It is also shown that the deformation of the knitted…

[Compression treatment for burned skin].

PubMed

Jaafar, Fadhel; Lassoued, Mohamed A; Sahnoun, Mahdi; Sfar, Souad; Cheikhrouhou, Morched

2012-02-01

The regularity of a compressive knit is defined as its ability to perform its function in a burnt skin. This property is essential to avoid the phenomenon of rejection of the material or toxicity problems But: Make knits biocompatible with high burnet of human skin. We fabric knits of elastic material. To ensure good adhesion to the skin, we made elastic material, typically a tight loop knitted. The Length of yarn absorbed by stitch and the raw matter are changed with each sample. The physical properties of each sample are measured and compared. Surface modifications are made to these samples by impregnation of microcapsules based on jojoba oil. Knits are compressif, elastic in all directions, light, thin, comfortable, and washable for hygiene issues. In addition, the washing can find their compressive properties. The Jojoba Oil microcapsules hydrated the human burnet skin. This moisturizer is used to the firmness of the wound and it gives flexibility to the skin. Compressive Knits are biocompatible with burnet skin. The mixture of natural and synthetic fibers is irreplaceable in terms comfort and regularity.

High sensitivity knitted fabric strain sensors

NASA Astrophysics Data System (ADS)

Xie, Juan; Long, Hairu; Miao, Menghe

2016-10-01

Wearable sensors are increasingly used in smart garments for detecting and transferring vital signals and body posture, movement and respiration. Existing fabric strain sensors made from metallized yarns have low sensitivity, poor comfort and low durability to washing. Here we report a knitted fabric strain sensor made from a cotton/stainless steel (SS) fibre blended yarn which shows much higher sensitivity than sensors knitted from metallized yarns. The fabric feels softer than pure cotton textiles owing to the ultrafine stainless steel fibres and does not lose its electrical property after washing. The reason for the high sensitivity of the cotton/SS knitted fabric sensor was explored by comparing its sensing mechanism with the knitted fabric sensor made from metallized yarns. The results show that the cotton/SS yarn-to-yarn contact resistance is highly sensitive to strain applied to hooked yarn loops.

75 FR 38459 - Certain Woven Electric Blankets From the People's Republic of China: Final Determination of Sales...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-07-02

... Industries (``Perfect Fit''), a U.S. importer of knitted electric blankets, submitted comments on the scope... investigation to include the following two statements: (1) ``knitted electric blankets in any form, whether... acknowledged that knitted electric blankets and electric mattress pads are not within the scope of the U.S...

Knitted outer gloves in primary hip and knee arthroplasty.

PubMed

Tanner, J; Wraighte, P; Howard, P

2006-01-01

A randomised trial was carried out to determine the rate of perforation to inner gloves when comparing latex with knitted gloves during hip and knee arthroplasty. Members of the surgical team were randomised to wear either two pairs of latex gloves (standard double gloving) or a knitted glove on top of a latex glove. In addition, participants completed a visual analogue assessment of their overall satisfaction with the gloves. A total of 406 inner gloves were tested for perforations over a four-month period: 23% of inner gloves were perforated when latex outer gloves were used and 6% of inner gloves were perforated when knitted outer gloves were used. In total, there were 64 perforations to the inner gloves; only one of these perforations was detected by the glove wearer. Wearing knitted outer gloves during hip and knee arthroplasty statistically significantly reduces the risk of perforation to inner latex gloves (p<0.0001).

Multi-Scaled Modeling the Mechanical Properties of Tubular Composites Reinforced with Innovated 3D Weft Knitted Spacer Fabrics

NASA Astrophysics Data System (ADS)

Omrani, Elahe; Hasani, Hossein; Dibajian, Sayed Houssain

2018-02-01

Textile composites of 3D integrated spacer configurations have been recently focused by several researchers all over the world. In the present study, newly-designed tubular composites reinforced with 3D spacer weft knitted fabrics were considered and the effects of their structural parameters on some applicable mechanical properties were investigated. For this purpose, two different samples of 3D spacer weft knitted textile types in tubular form were produced on an electronic flat knitting machine, using glass/nylon hybrid yarns. Thermoset tubular-shaped composite parts were manufactured via vacuum infusion molding process using epoxy resin. The mechanical properties of the produced knitted composites in term of external static and internal hydrostatic pressures were evaluated. Resistance of the produced composites against the external static and internal hydrostatic pressures was numerically simulated using multi-scale modeling method. The finding revealed that there is acceptable correlation between experimental and theoretical results.

19 CFR 10.607 - Goods eligible for tariff preference level claims.

Code of Federal Regulations, 2011 CFR

2011-04-01

..., HTSUS, that are both cut (or knit-to-shape) and sewn or otherwise assembled in the territory of... wool fabric of subheading 5111.11.70, 5111.19.60, or 5111.90.90, HTSUS, the goods are both cut (or knit... U.S. Note 15(c), Subchapter XV, Chapter 99, HTSUS; (d) Apparel goods of Costa Rica, not knitted or...

Knitting as an Aesthetic of Civic Engagement: Re-Conceptualizing Feminist Pedagogy through Touch

ERIC Educational Resources Information Center

Springgay, Stephanie

2010-01-01

Everyone is in the midst of an explosion in the popularity of knitting. Shifting the traditional stereotype of what a knitter should be, the youth of today have taken up knitting as a tactile and embodied form of connectivity. In a rapidly changing and unpredictable world, characterized by, among other factors, the unprecedented expansion of…

Antifungal activity of fabrics knitted by metalized Silver/Polyester composite yarn

NASA Astrophysics Data System (ADS)

Özkan, İ.; Duru Baykal, P.

2017-10-01

In this study, antifungal properties of fabric knitted from metalized silver/polyester composite yarn were investigated. Intermingling is an alternative technique for yarn blending process. Yarns having different features can be combined by feeding the same intermingling jet. This process is defined as commingling. In the study, intermingling process was used to produce metalized silver/polyester composite yarn. Commingled yarns were knitted to single jersey fabrics by IPM brand sample type circular knitting machine. Antifungal activity test was applied to samples against Aspergillus Niger according to AATCC 30 test procedure. It has been identified that the application provides antifungal activity to fabric.

Knitting for heart valve tissue engineering

PubMed Central

Ayad, Nadia; Wojciechowska, Dorota; Zielińska, Dorota; Struszczyk, Marcin H.; Latif, Najma; Yacoub, Magdi

Knitting is a versatile technology which offers a large portfolio of products and solutions of interest in heart valve (HV) tissue engineering (TE). One of the main advantages of knitting is its ability to construct complex shapes and structures by precisely assembling the yarns in the desired position. With this in mind, knitting could be employed to construct a HV scaffold that closely resembles the authentic valve. This has the potential to reproduce the anisotropic structure that is characteristic of the heart valve with the yarns, in particular the 3-layered architecture of the leaflets. These yarns can provide oriented growth of cells lengthwise and consequently enable the deposition of extracellular matrix (ECM) proteins in an oriented manner. This technique, therefore, has a potential to provide a functional knitted scaffold, but to achieve that textile engineers need to gain a basic understanding of structural and mechanical aspects of the heart valve and in addition, tissue engineers must acquire the knowledge of tools and capacities that are essential in knitting technology. The aim of this review is to provide a platform to consolidate these two fields as well as to enable an efficient communication and cooperation among these two research areas. PMID:29043276

Advanced Exploration Systems (AES) Logistics Reduction and Repurposing Project: Advanced Clothing Ground Study Final Report

NASA Technical Reports Server (NTRS)

Byrne, Vicky; Orndoff, Evelyne; Poritz, Darwin; Schlesinger, Thilini

2013-01-01

All human space missions require significant logistical mass and volume that will become an excessive burden for long duration missions beyond low Earth orbit. The goal of the Advanced Exploration Systems (AES) Logistics Reduction & Repurposing (LRR) project is to bring new ideas and technologies that will enable human presence in farther regions of space. The LRR project has five tasks: 1) Advanced Clothing System (ACS) to reduce clothing mass and volume, 2) Logistics to Living (L2L) to repurpose existing cargo, 3) Heat Melt Compactor (HMC) to reprocess materials in space, 4) Trash to Gas (TTG) to extract useful gases from trash, and 5) Systems Engineering and Integration (SE&I) to integrate these logistical components. The current International Space Station (ISS) crew wardrobe has already evolved not only to reduce some of the logistical burden but also to address crew preference. The ACS task is to find ways to further reduce this logistical burden while examining human response to different types of clothes. The ACS task has been broken into a series of studies on length of wear of various garments: 1) three small studies conducted through other NASA projects (MMSEV, DSH, HI-SEAS) focusing on length of wear of garments treated with an antimicrobial finish; 2) a ground study, which is the subject of this report, addressing both length of wear and subject perception of various types of garments worn during aerobic exercise; and 3) an ISS study replicating the ground study, and including every day clothing to collect information on perception in reduced gravity in which humans experience physiological changes. The goal of the ground study is first to measure how long people can wear the same exercise garment, depending on the type of fabric and the presence of antimicrobial treatment, and second to learn why. Human factors considerations included in the study consist of the Institutional Review Board approval, test protocol and participants' training, and a web-based data collection questionnaire. Cardiovascular exercise was chosen as the activity in this experiment for its profuse sweating effect and because it is considered a more severe treatment applied to the clothes than every-day usage. Study garments were exercise T-shirts and shorts purchased from various vendors. Fabric construction, fabric composition, and finishing treatment were defined as the key variables. The study was divided into three balanced experiments: a cotton-polyester-wool (CPW) T-shirts study with 61 participants, a polyester-modacrylic-polyester/cocona (PMC) T-shirts study with 40 participants, and a shorts study with 70 participants. In the CPW study, the T-shirts were made of 100% cotton, or of 100% polyester or of 100% wool, and categorized into open and tight knit constructions. In the PMC study, the T-shirts were made of 100% polyester, or of 82% modacrylic, or of 95% polyester with 5% cocona fiber, without construction distinction. The shorts were made either of 100% cotton or of 100% polyester, and were knitted or woven. Some garments were treated with Bio-Protect 500 antimicrobial finish according to the experimental design. The data collected from the questionnaire included garment identification, level of exertion, duration of exercise session, number of exercise sessions, an ordinal preference scale for nine sensory elements, and reason for retiring a used garment. From the analysis of the combined CPW and PMC shirt studies, there are statistically significant differences among the mean lifetimes of various types of shirts. The exercise shirts with the longest mean lifetimes are untreated wool (600 minutes), treated cotton (526 minutes), and untreated modacrylic (515 minutes). From the combined CPW and PMC shirt studies, the most preferred material was untreated open-knit wool, which is one of the two materials that jointly were worn the longest, untreated wool, both open-knit and tight-knit. For the CP shorts study, there were no statistically significant differences in mean lifetimes of the exercise shorts at the 5% significance level due to the treatment combinations. There was therefore no justification to examine differences among levels of main effects or interactions. The preference for shorts was in this order: untreated woven polyester, untreated knitted polyester, untreated woven cotton, and treated knitted cotton. The nine preference scales were tabulated to determine the preference responses at the end of those exercise periods which were prior to the period when a garment was retired and a new garment was started. The assumption is that an unfavorable assessment of a garment leads to its retirement. The scent scale response was predominantly unfavorable at the end of the exercise period immediately prior to the exercise period when a new garment was started.

Overview of Theme Issue with Title "Securing and Supporting Good Teaching: Views from the Schools."

ERIC Educational Resources Information Center

Education and Urban Society, 1985

1985-01-01

Contains 11 articles, including first-person accounts, on the work and work environment of teachers. Discusses the factors that make teaching satisfying or frustrating and offers suggestions for change in both the policy and organizational framework of the schools and the roles, relationships, and ethos knitting together individuals in particular…

Investigation of changes in the electrical properties of novel knitted conductive textiles during cyclic loading.

PubMed

Isaia, Cristina; McNally, Donal; McMaster, Simon A; Branson, David T

2016-08-01

Combining stainless steel with polyester fibres adds an attractive conductive behaviour to the yarn. Once knitted in such a manner, fabrics develop sensing properties that make the textiles, also known as e-textiles, suitable for smart/wearable applications. Structural deformations of the fibres (e.g. stretching) will cause changes in the conductivity of the fabric. This work investigates changes in the electrical properties exhibited by four knitted conductive textiles made of 20% stainless steel and 80% polyester fibres during cyclic loading. The samples were preconditioned first with 500 hundred cycles of unidirectional elongation and, after a rest interval, tested again for repeatability at the same conditions. In both cases the electrical behaviour stabilises after a few tens of cycles. In particular the repeatability test exhibited a considerably smaller settling time and a larger resistance due to the mechanical stabilisation and the loosening of the fabrics, respectively. It was found that the current provided to the fabrics affects the resistance measurements by decreasing the resistance value at which the samples become electrically stable. The reported findings present a valid method for the electrical characterisation of conductive textiles for use in further studies as a wearable technology.

In vitro assessment of ultraviolet protection of coloured cotton knitted fabrics with different structures under stretched and wet conditions.

PubMed

Wong, W Y; Lam, J K C; Kan, C W; Postle, R

2015-04-01

Clothing provides intrinsic ultraviolet (UV) protection that can be improved by colouration. However, the daily wearing condition can undermine the UV protection of coloured clothing wherein garments are stretched by body movement and/or wetted by perspiration of wearers. Knitwear is an indispensable clothing in summer, but its UV protection against wearing conditions lacks extensive study especially in a fabric structural approach. This article aimed at narrowing the research gap by focusing on the UV protection against stretch and wetness provided by various knitted fabric constructions incorporating the knit, tuck and miss stitches. The results show that the black knitted fabrics exhibit a significant reduction in the UV protection factor by 53% on average at a 10% stretch level. Knitted fabrics with miss stitches retained good UV protection even when the fabrics were stretched by 20% of its original dimensions. © The Author 2014. Published by Oxford University Press. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

Attachment Parenting: A Style That Works.

ERIC Educational Resources Information Center

Sears, William

1995-01-01

Discusses the benefits of attachment parenting, which emphasizes parental commitment, a low-stress pregnancy, childbirth preparation, breast-feeding with child-led weaning, prompt response to the baby's crying, flexible sleeping arrangements, close-knit father-mother-baby functioning, and the avoidance of detachment parenting. Attachment parenting…

Social Interactions and Learning in an Informal Setting: An Ethnography of Communication in a Knitting Circle.

ERIC Educational Resources Information Center

Jacobson, Anna

This paper describes a study of a speech community, a group of approximately 10 women, aged 25 to 65, who met at least 3 times a month to knit, drink coffee, and chat. The paper notes that knitting circles have survived through history because they serve a social function that surpasses historical events--they are communities that co-construct the…

Evaluation of materials proposed for use in space flight

NASA Technical Reports Server (NTRS)

Duncan, W. C.

1981-01-01

The primary irritancy and allergenicity of flame resistant treated cotton knit shirts proposed for use in space flight were evaluated. The knitted shirts were supplied by NASA as follows: knitted shirts with collars were made of two-ply mercerized single-knit cotton jersey. The fabric was treated with tetrakis (hydroxymethyl) phosphonium hydroxide and subsequently cured with gaseous ammonia (THPOH/NH3). The final treatment comprised adding on diammonium phosphate (DAP)/urea. The treated fabric was process scoured to remove extraneous materials, top softened and mechanically or chemically finished as required for specific needs. Diammonium phosphate is a more efficient flame inhabitant than the phosphonium; thus, the combination treatment served to impart higher resistance to ignition and sustained combustion as required by NASA test standard.

Effects of thermal energy harvesting on the human - clothing - environment microsystem

NASA Astrophysics Data System (ADS)

Myers, A. C.; Jur, J. S.

2017-10-01

The objective of this work is to perform an in depth investigation of garment-based thermal energy harvesting. The effect of human and environmental factors on the working efficiency of a thermal energy harvesting devices, or a thermoelectric generator (TEG), placed on the body is explored.. Variables that strongly effect the response of the TEG are as follows: skin temperature, human motion or speed, body location, environmental conditions, and the textile properties surrounding the TEG. In this study, the use of textiles for managing thermal comfort of wearable technology and energy harvesting are defined. By varying the stitch length and/or knit structure, one can manipulate the thermal conductivity of the garment in a specific location. Another method of improving TEG efficiency is through the use of a heat spreader, which increases the effective collection area of heat on the TEG hot side. Here we show the effect of a TEG on the thermal properties of a garment with regard to two knit stitches, jersey and 1 × 1 rib.

Direct Integration of Dynamic Emissive Displays into Knitted Fabric Structures

NASA Astrophysics Data System (ADS)

Bellingham, Alyssa

Smart textiles are revolutionizing the textile industry by combining technology into fabric to give clothing new abilities including communication, transformation, and energy conduction. The advent of electroluminescent fibers, which emit light in response to an applied electric field, has opened the door for fabric-integrated emissive displays in textiles. This thesis focuses on the development of a flexible and scalable emissive fabric display with individually addressable pixels disposed within a fabric matrix. The pixels are formed in areas where a fiber supporting the dielectric and phosphor layers of an electroluminescent structure contacts a conductive surface. This conductive surface can be an external conductive fiber, yarn or wire, or a translucent conductive material layer deposited at set points along the electroluminescent fibers. Different contacting methods are introduced and the different ways the EL yarns can be incorporated into the knitted fabric are discussed. EL fibers were fabricated using a single yarn coating system with a custom, adjustable 3D printed slot die coater for even distribution of material onto the supporting fiber substrates. These fibers are mechanically characterized inside of and outside of a knitted fabric matrix to determine their potential for various applications, including wearables. A 4-pixel dynamic emissive display prototype is fabricated and characterized. This is the first demonstration of an all-knit emissive display with individually controllable pixels. The prototype is composed of a grid of fibers supporting the dielectric and phosphor layers of an electroluminescent (EL) device structure, called EL fibers, and conductive fibers acting as the top electrode. This grid is integrated into a biaxial weft knit structure where the EL fibers make up the rows and conductive fibers make up the columns of the reinforcement yarns inside the supporting weft knit. The pixels exist as individual segments of electroluminescence that occur where the conductive fibers contact the EL fibers. A passive matrix addressing scheme was used to apply a voltage to each pixel individually, creating a display capable of dynamically communicating information. Optical measurements of the intensity and color of emitted light were used to quantify the performance of the display and compare it to state-of-the-art display technologies. The charge-voltage (Q-V) electrical characterization technique is used to gain information about the ACPEL fiber device operation, and mechanical tests were performed to determine the effect everyday wear and tear would have on the performance of the display. The presented textile display structure and method of producing fibers with individual sections of electroluminescence addresses the shortcomings in existing textile display technology and provides a route to directly integrated communicative textiles for applications ranging from biomedical research and monitoring to fashion. An extensive discussion of the materials and methods of production needed to scale this textile display technology and incorporate it into wearable applications is presented.

A new design concept for knitted external vein-graft support mesh.

PubMed

Singh, Charanpreet; Wang, Xungai

2015-08-01

Autologous vein-graft failure significantly limits the long-term efficacy of coronary artery bypass procedures. The major cause behind this complication is biomechanical mismatch between the vein and coronary artery. The implanted vein experiences a sudden increase (10-12 fold) in luminal pressures. The resulting vein over-distension or 'ballooning' initiates wall thickening phenomenon and ultimate occlusion. Therefore, a primary goal in improving the longevity of a coronary bypass procedure is to inhibit vein over-distension using mechanical constriction. The idea of using an external vein-graft support mesh has demonstrated sustained benefits and wide acceptance in experimental studies. Nitinol based knitted structures have offered more promising mechanical features than other mesh designs owing to their unique loosely looped construction. However, the conventional plain knit construction still exhibits limitations (radial compliance, deployment ease, flexibility, and bending stresses) which limit this design from proving its real clinical advantage. The new knitted mesh design presented in this study is based on the concept of composite knitting utilising high modulus (nitinol and polyester) and low modulus (polyurethane) material components. The experimental comparison of the new design with a plain knit design demonstrated significant improvement in biomechanical (compliance, flexibility, extensibility, viscoelasticity) and procedural (deployment limit) parameters. The results are indicative of the promising role of new mesh in restoring the lost compliance and pulsatility of vein-graft at high arterial pressures. This way it can assist in controlled vein-graft remodelling and stepwise restoration of vein mechanical homoeostasis. Also, improvement in deployment limit parameter offers more flexibility for a surgeon to use a wide range of vein diameters, which may otherwise be rendered unusable for a plain knit mesh. Copyright © 2015 Elsevier Ltd. All rights reserved.

Preparation of collagen/polyurethane/knitted silk as a composite scaffold for tendon tissue engineering.

PubMed

Sharifi-Aghdam, Maryam; Faridi-Majidi, Reza; Derakhshan, Mohammad Ali; Chegeni, Arash; Azami, Mahmoud

2017-07-01

The main objective of this study was to prepare a hybrid three-dimensional scaffold that mimics natural tendon tissues. It has been found that a knitted silk shows good mechanical strength; however, cell growth on the bare silk is not desirable. Hence, electrospun collagen/polyurethane combination was used to cover knitted silk. A series of collagen and polyurethane solutions (4%-7% w/v) in aqueous acetic acid were prepared and electrospun. According to obtained scanning electron microscopy images from pure collagen and polyurethane nanofibers, concentration was set constant at 5% (w/v) for blend solutions of collagen/polyurethane. Afterward, blend solutions with the weight ratios of 75/25, 50/50 and 25/75 were electrospun. Scanning electron microscopy images demonstrated the smooth and uniform morphology for the optimized nanofibers. The least fibers diameter among three weight ratios was found for collagen/polyurethane (25/75) which was 100.86 ± 40 nm and therefore was selected to be electrospun on the knitted silk. Attenuated total reflectance-Fourier transform infrared spectra confirmed the chemical composition of obtained electrospun nanofibers on the knitted silk. Tensile test of the specimens including blend nanofiber, knitted silk and commercial tendon substitute examined and indicated that collagen/polyurethane-coated knitted silk has appropriate mechanical properties as a scaffold for tendon tissue engineering. Then, Alamar Blue assay of the L929 fibroblast cell line seeded on the prepared scaffolds demonstrated appropriate viability of the cells with a significant proliferation on the scaffold containing more collagen content. The results illustrate that the designed structure would be promising for being used as a temporary substitute for tendon repair.

A two-dimensional analytical model and experimental validation of garter stitch knitted shape memory alloy actuator architecture

NASA Astrophysics Data System (ADS)

Abel, Julianna; Luntz, Jonathan; Brei, Diann

2012-08-01

Active knits are a unique architectural approach to meeting emerging smart structure needs for distributed high strain actuation with simultaneous force generation. This paper presents an analytical state-based model for predicting the actuation response of a shape memory alloy (SMA) garter knit textile. Garter knits generate significant contraction against moderate to large loads when heated, due to the continuous interlocked network of loops of SMA wire. For this knit architecture, the states of operation are defined on the basis of the thermal and mechanical loading of the textile, the resulting phase change of the SMA, and the load path followed to that state. Transitions between these operational states induce either stick or slip frictional forces depending upon the state and path, which affect the actuation response. A load-extension model of the textile is derived for each operational state using elastica theory and Euler-Bernoulli beam bending for the large deformations within a loop of wire based on the stress-strain behavior of the SMA material. This provides kinematic and kinetic relations which scale to form analytical transcendental expressions for the net actuation motion against an external load. This model was validated experimentally for an SMA garter knit textile over a range of applied forces with good correlation for both the load-extension behavior in each state as well as the net motion produced during the actuation cycle (250% recoverable strain and over 50% actuation). The two-dimensional analytical model of the garter stitch active knit provides the ability to predict the kinetic actuation performance, providing the basis for the design and synthesis of large stroke, large force distributed actuators that employ this novel architecture.

40 CFR 410.51 - Specialized definitions.

Code of Federal Regulations, 2010 CFR

2010-07-01

... STANDARDS TEXTILE MILLS POINT SOURCE CATEGORY Knit Fabric Finishing Subcategory § 410.51 Specialized... the knit fabric finishing subcategory for facilities that are engaged primarily in dyeing or finishing...

40 CFR 410.51 - Specialized definitions.

Code of Federal Regulations, 2011 CFR

2011-07-01

... STANDARDS TEXTILE MILLS POINT SOURCE CATEGORY Knit Fabric Finishing Subcategory § 410.51 Specialized... the knit fabric finishing subcategory for facilities that are engaged primarily in dyeing or finishing...

Thermo-mechanical behavior of stainless steel knitted structures

NASA Astrophysics Data System (ADS)

Hamdani, Syed Talha Ali; Fernando, Anura; Maqsood, Muhammad

2016-09-01

Heating fabric is an advanced textile material that is extensively researched by the industrialists and the scientists alike. Ability to create highly flexible and drapeable heating fabrics has many applications in everyday life. This paper presents a study conducted on the comparison of heatability of knitted fabric made of stainless steel yarn. The purpose of the study is to find a suitable material for protective clothing against cold environments. In the current research the ampacity of stainless steel yarn is observed in order to prevent the overheating of the heating fabrics. The behavior of the knitted structure is studied for different levels of supply voltage. Infrared temperature sensing is used to measure the heat generated from the fabrics in order to measure the temperature of the fabrics without physical contact. It is concluded that interlock structure is one of the most suited structures for knitted heating fabrics. As learnt through this research, fabrics made of stainless steel yarn are capable of producing a higher level of heating compared to that of knitted fabric made using silver coated polymeric yarn at the same supply voltage.

A knitted glove sensing system with compression strain for finger movements

NASA Astrophysics Data System (ADS)

Ryu, Hochung; Park, Sangki; Park, Jong-Jin; Bae, Jihyun

2018-05-01

Development of a fabric structure strain sensor has received considerable attention due to its broad application in healthcare monitoring and human–machine interfaces. In the knitted textile structure, it is critical to understand the surface structural deformation from a different body motion, inducing the electrical signal characteristics. Here, we report the electromechanical properties of the knitted glove sensing system focusing on the compressive strain behavior. Compared with the electrical response of the tensile strain, the compressive strain shows much higher sensitivity, stability, and linearity via different finger motions. Additionally, the sensor exhibits constant electrical properties after repeated cyclic tests and washing processes. The proposed knitted glove sensing system can be readily extended to a scalable and cost-effective production due to the use of a commercialized manufacturing system.

Study the relation between the yarn pulling force and the bursting strength of single jersey knitted fabric

NASA Astrophysics Data System (ADS)

El-Tarfawy, S. Y.

2017-10-01

There are various methods to evaluate knitted fabric’s properties; the yarn pulling force is a suitable experimental method to investigate the properties of single jersey knitted fabric.In this study, a frame is attached to the electronic tensile strength tester to fix different single jersey knitted fabrics with different dimensional properties. A hook is connected to the upper load cell in the tensile tester to ravel the first upper course then records the values of the yarn pulling force. In addition to that, the effect of the loop length, yarn count, and raw material on yarn pulling force and specific fabric bursting strength are studied. It is concluded that yarn pulling force has a significant relation with specific fabric bursting strength.

The Effect of Stretching on Ultraviolet Protection of Cotton and Cotton/Coolmax-Blended Weft Knitted Fabric in a Dry State

PubMed Central

Kan, Chi-wai; Yam, Lim-yung; Ng, Sun-pui

2013-01-01

In this paper, the ultraviolet protection factor (UPF) of weft knitted fabrics made from 20Ne cotton yarn, Coolmax yarn and their blends in dry, relaxed and stretched states were studied. According to the fibre composition, samples were divided into three groups: Group I (single cotton yarn); Group II (cotton/cotton combination); and Group III (Coolmax/cotton combination) for discussion. In addition, yarn and fabric properties such as yarn tenacity, yarn strength, fibre combination and water vapour transmission that affect the corresponding UPF values are used for formulating a prediction model in order to determine UPF. Generally speaking, when samples are measured under stretched conditions in a dry state, they exhibit a remarkable reduction in ultraviolet protective power, as pores are opened up and UV radiation can easily penetrate through these pores. In addition, greater stretch percentage came along with greater reduction in UPF. This can be explained by the fact that the amount and the size of pores increase when samples are subjected to greater tension. PMID:28788371

Innovative cellular distance structures from polymeric and metallic threads

NASA Astrophysics Data System (ADS)

Wieczorek, F.; Trümper, W.; Cherif, C.

2017-10-01

Knitting allows a high individual adaptability of the geometry and properties of flat-knitted spacer fabrics. This offers advantages for the specific adjustment of the mechanical properties of innovative composites based on highly viscous matrix systems such as bone cement, elastomer or foam and cellular reinforcing structures made from e. g. polymeric monofilaments or metallic wires. The prerequisite is the availability of binding solutions for highly productive production of functional, cellular, self-stabilized spacer flat knitted fabrics as supporting and functionalized structures.

High-Impact Practices for Cultural Competency

ERIC Educational Resources Information Center

Talbani, Aziz

2013-01-01

The world has closely-knitted economic, social, and cultural relations that offer greater entrepreneurial and professional opportunities than ever before. Students in the 21st century global society will live and work in a rapidly changing social, economic, and political world; they will require global cultural competencies to be successful. Study…

16 CFR 1611.31 - Terms defined.

Code of Federal Regulations, 2011 CFR

2011-01-01

..., which is woven, knitted, felted or otherwise produced from any natural or man-made fiber, or substitute... include those fabrics having fancy woven, knitted or flock printed surfaces. (h) The term raised surface...

Comparison of cotton and acrylic socks using a generic cushion sole design for runners.

PubMed

Herring, K M; Richie, D H

1993-09-01

A longitudinal single-blind study was conducted to test the friction blister prevention properties of synthetic acrylic socks in a generic construction. This study serves as a comparison with the authors' previous work comparing acrylic and cotton socks in a patented padded construction. Twenty-seven long-distance runners provided data regarding dampness, temperature, friction blister incidence, severity, and size. Two different socks were tested; each was identical in every aspect of construction except the fiber content. One test sock was composed of 100% synthetic acrylic fibers, and the other was composed of 100% natural cotton fibers. These results were unsuccessful at demonstrating any superiority of cotton or acrylic fibers when knitting produced a generic "cushion sole" sock. The superiority of acrylic fibers has thus far been demonstrated only when sock knitting provides adequate anatomical padding [corrected].

Order Without Intellectual Property Law: Open Science in Influenza.

PubMed

Kapczynski, Amy

Today, intellectual property (IP) scholars accept that IP as an approach to information production has serious limits. But what lies beyond IP? A new literature on "intellectual production without IP" (or "IP without IP") has emerged to explore this question, but its examples and explanations have yet to convince skeptics. This Article reorients this new literature via a study of a hard case: a global influenza virus-sharing network that has for decades produced critically important information goods, at significant expense, and in a loose-knit group--all without recourse to IP. I analyze the Network as an example of "open science," a mode of information production that differs strikingly from conventional IP, and yet that successfully produces important scientific goods in response to social need. The theory and example developed here refute the most powerful criticisms of the emerging "IP without IP" literature, and provide a stronger foundation for this important new field. Even where capital costs are high, creation without IP can be reasonably effective in social terms, if it can link sources of funding to reputational and evaluative feedback loops like those that characterize open science. It can also be sustained over time, even by loose-knit groups and where the stakes are high, because organizations and other forms of law can help to stabilize cooperation. I also show that contract law is well suited to modes of information production that rely upon a "supply side" rather than "demand side" model. In its most important instances, "order without IP" is not order without governance, nor order without law. Recognizing this can help us better ground this new field, and better study and support forms of knowledge production that deserve our attention, and that sometimes sustain our very lives.

Experimental investigation of active rib stitch knitted architecture for flow control applications

NASA Astrophysics Data System (ADS)

Abel, Julianna M.; Mane, Poorna; Pascoe, Benjamin; Luntz, Jonathan; Brei, Diann

2010-04-01

Actively manipulating flow characteristics around the wing can enhance the high-lift capability and reduce drag; thereby, increasing fuel economy, improving maneuverability and operation over diverse flight conditions which enables longer, more varied missions. Active knits, a novel class of cellular structural smart material actuator architectures created by continuous, interlocked loops of stranded active material, produce distributed actuation that can actively manipulate the local surface of the aircraft wing to improve flow characteristics. Rib stitch active knits actuate normal to the surface, producing span-wise discrete periodic arrays that can withstand aerodynamic forces while supplying the necessary displacement for flow control. This paper presents a preliminary experimental investigation of the pressuredisplacement actuation performance capabilities of a rib stitch active knit based upon shape memory alloy (SMA) wire. SMA rib stitch prototypes in both individual form and in stacked and nestled architectures were experimentally tested for their quasi-static load-displacement characteristics, verifying the parallel and series relationships of the architectural configurations. The various configurations tested demonstrated the potential of active knits to generate the required level of distributed surface displacements while under aerodynamic level loads for various forms of flow control.

Effects of wearing knitted or rubber gloves on the transfer of Escherichia cohi between hands and meat.

PubMed

Gill, C O; Jones, T

2002-06-01

On eight occasions, five volunteers each handled five pieces of meat with bare hands or while wearing dry or wet knitted gloves or rubber gloves after hands had been inoculated with Escherichia coli or after handling a piece of meat inoculated with E. coli. On each occasion, after all meat was handled, each piece of meat, glove, and hand were sampled to recover E. coli. When hands were inoculated, E. coli was recovered from all meat handled with bare hands, in lesser numbers from some pieces handled with knitted gloves, and from only one piece handled with rubber gloves. When pieces of inoculated meat were handled, the numbers of E. coli transferred to uninoculated meat from bare hands or rubber gloves decreased substantially with each successive piece of uninoculated meat, but decreases were small with knitted gloves. The findings indicate that, compared with bare hands, the use of knitted gloves could reduce the transfer of bacteria from hands to meat but could increase the transfer of bacteria between meat pieces, whereas the use of rubber gloves could largely prevent the first and greatly reduce the second type of bacteria transfer.

19 CFR 10.850 - Verification of claim for duty-free treatment.

Code of Federal Regulations, 2011 CFR

2011-04-01

... yarn, fabric, fabric components, and knit-to-shape components that were used in the production of the..., fabric, fabric components and knit-to-shape components. The affidavit or statement of origin should...

16 CFR 303.1 - Terms defined.

Code of Federal Regulations, 2011 CFR

2011-01-01

... covering to which the pile, face, or outer surface is woven, tufted, hooked, knitted, or otherwise attached..., knitted, or felted into a wool product which, after having been used in any way by the ultimate consumer...

Analysis of knitted fabric reinforced flexible composites and applications in thermoforming

NASA Astrophysics Data System (ADS)

Bekisli, Burak

In this study, large deformation behavior of knitted fabric reinforced composites is investigated. In order to fully utilize the unique stretchability of knitted fabric reinforcements, elastomeric materials are used as the matrix material, resulting in "flexible composites" capable of reaching several hundred percent stretch before failing. These non-traditional composites are ideal candidates for many engineering applications where large deformation is desired, including energy/impact absorption and novel forming processes. A multi-level nonlinear finite element (FE) procedure is developed to analyze the deformation behavior of plain weft-knitted fabrics and the composites derived from these materials. The hierarchy of the model is composed of a 3D unit cell analysis (micro/meso-scale) and a 2D global analysis (macro scale). Using results from different numerical experiments performed in the micro/meso scale, a mechanical behavior database of knit fabric geometries is constructed, both for the uniaxial and biaxial stretch cases. Through an optimization procedure, these results are used to determine the mechanical properties of nonlinear truss elements needed for modeling in the macro scale. A hexagonal honeycomb structure, which closely resembles the knit fabric architecture, is formed using these nonlinear trusses. This truss structure is then used to efficiently model a large number of loops generally found in a fabric. Results from uniaxial experimental measurements are presented for knitted fabrics to validate the FE model. Appropriate hyperelastic material models are determined for the elastomeric matrix, using a curve fit to experimental data. Examples of raw fabric and composite deformation simulations in the global scale are presented in this study. Two types of composites are studied experimentally and numerically: (1) knitted fabric embedded in an elastomeric medium, and (2) the sandwich type composites with elastomeric skins and fabric core. The strain energy dissipation is found to be superior in the latter case, since yarns are not restricted by the elastomer. In addition, yarns used in this type of composite move to effectively align along the load direction, yielding a better utilization of the fibers' high axial stiffness. Fabrication methods, including novel techniques involving twin-sheet thermoforming, for both types of composites are discussed. Tensile test results for glassfiber reinforced, TPE/polyurea based specimens are also presented. Innovative concepts related to the thermoforming process are also investigated using the developed numerical model. It is shown that some of the most critical problems in this forming process, such as non-uniform thickness distribution in the final part and the sensitivity of part quality to minor thermal variations, can be beneficially addressed using carefully "tailored" knit fabrics. Common thermoformed part geometries, such as a 3D box corner and a long U-shaped channel, are studied in numerical simulations to illustrate the effects of knitted fabric reinforcements on the stabilization of the forming process.

Current Research on Sleep and Dreams.

ERIC Educational Resources Information Center

National Inst. of Mental Health (DHEW), Bethesda, MD.

This monograph summarizes an extensive body of sleep and dream research in order to indicate the major trends of work in this area. Although a mosaic of disciplines are represented, a spirit of cooperation has made it possible to knit together data which might have remained unrelated. The research reported here provides knowledge about: (1) the…

The Knitting Lesson.

ERIC Educational Resources Information Center

Smith, Pamela

1987-01-01

Based on Jean-Francois Millet's 1869 painting, "The Knitting Lesson," this lesson's goal is to introduce students in grades seven through nine to genre (everyday life) painting the nineteenth century. The lesson is also designed to show that some aspects of genre may be timeless. (BSR)

Knitting Mochilas: A Sociocultural, Developmental Practice in Arhuaco Indigenous Communities

PubMed Central

Rodríguez-Burgos, Lilian Patricia; Rodríguez-Castro, Jennifer; Bojacá-Rodríguez, Sandra Milena; Izquierdo-Martínez, Dwrya Elena; Amórtegui-Lozano, Allain Alexander; Prieto-Castellanos, Miguel Angel

2016-01-01

The purpose of this article is to analyze the psycho-cultural processes involved in knitting “mochilas” (traditional bags), a common craft in the Arhuaco indigenous community located in the Sierra Nevada de Santa Marta, Colombia. The article is structured in three parts, as follows: first, issues related to child development are discussed; then, the analysis method used to study the processes involved in the practice of knitting is presented and, finally, we reflect on the importance of recovering the sense and meaning of this everyday practice as a way to study child development. PMID:27298634

19 CFR 10.819 - Goods eligible for tariff preference claims.

Code of Federal Regulations, 2010 CFR

2010-04-01

... Chapters 61 or 62 of the HTSUS that are cut or knit to shape, or both, and sewn or otherwise assembled in... HTSUS that are cut or knit to shape, or both, and sewn or otherwise assembled in the territory of...

19 CFR 10.819 - Goods eligible for tariff preference claims.

Code of Federal Regulations, 2011 CFR

2011-04-01

... Chapters 61 or 62 of the HTSUS that are cut or knit to shape, or both, and sewn or otherwise assembled in... HTSUS that are cut or knit to shape, or both, and sewn or otherwise assembled in the territory of...

Emergence of scale-free close-knit friendship structure in online social networks.

PubMed

Cui, Ai-Xiang; Zhang, Zi-Ke; Tang, Ming; Hui, Pak Ming; Fu, Yan

2012-01-01

Although the structural properties of online social networks have attracted much attention, the properties of the close-knit friendship structures remain an important question. Here, we mainly focus on how these mesoscale structures are affected by the local and global structural properties. Analyzing the data of four large-scale online social networks reveals several common structural properties. It is found that not only the local structures given by the indegree, outdegree, and reciprocal degree distributions follow a similar scaling behavior, the mesoscale structures represented by the distributions of close-knit friendship structures also exhibit a similar scaling law. The degree correlation is very weak over a wide range of the degrees. We propose a simple directed network model that captures the observed properties. The model incorporates two mechanisms: reciprocation and preferential attachment. Through rate equation analysis of our model, the local-scale and mesoscale structural properties are derived. In the local-scale, the same scaling behavior of indegree and outdegree distributions stems from indegree and outdegree of nodes both growing as the same function of the introduction time, and the reciprocal degree distribution also shows the same power-law due to the linear relationship between the reciprocal degree and in/outdegree of nodes. In the mesoscale, the distributions of four closed triples representing close-knit friendship structures are found to exhibit identical power-laws, a behavior attributed to the negligible degree correlations. Intriguingly, all the power-law exponents of the distributions in the local-scale and mesoscale depend only on one global parameter, the mean in/outdegree, while both the mean in/outdegree and the reciprocity together determine the ratio of the reciprocal degree of a node to its in/outdegree. Structural properties of numerical simulated networks are analyzed and compared with each of the four real networks. This work helps understand the interplay between structures on different scales in online social networks.

Emergence of Scale-Free Close-Knit Friendship Structure in Online Social Networks

PubMed Central

Cui, Ai-Xiang; Zhang, Zi-Ke; Tang, Ming; Hui, Pak Ming; Fu, Yan

2012-01-01

Although the structural properties of online social networks have attracted much attention, the properties of the close-knit friendship structures remain an important question. Here, we mainly focus on how these mesoscale structures are affected by the local and global structural properties. Analyzing the data of four large-scale online social networks reveals several common structural properties. It is found that not only the local structures given by the indegree, outdegree, and reciprocal degree distributions follow a similar scaling behavior, the mesoscale structures represented by the distributions of close-knit friendship structures also exhibit a similar scaling law. The degree correlation is very weak over a wide range of the degrees. We propose a simple directed network model that captures the observed properties. The model incorporates two mechanisms: reciprocation and preferential attachment. Through rate equation analysis of our model, the local-scale and mesoscale structural properties are derived. In the local-scale, the same scaling behavior of indegree and outdegree distributions stems from indegree and outdegree of nodes both growing as the same function of the introduction time, and the reciprocal degree distribution also shows the same power-law due to the linear relationship between the reciprocal degree and in/outdegree of nodes. In the mesoscale, the distributions of four closed triples representing close-knit friendship structures are found to exhibit identical power-laws, a behavior attributed to the negligible degree correlations. Intriguingly, all the power-law exponents of the distributions in the local-scale and mesoscale depend only on one global parameter, the mean in/outdegree, while both the mean in/outdegree and the reciprocity together determine the ratio of the reciprocal degree of a node to its in/outdegree. Structural properties of numerical simulated networks are analyzed and compared with each of the four real networks. This work helps understand the interplay between structures on different scales in online social networks. PMID:23272067

Smarten up garments through knitting

NASA Astrophysics Data System (ADS)

Schwarz-Pfeiffer, A.; Obermann, M.; Weber, M. O.; Ehrmann, A.

2016-07-01

Smart textiles are a growing and fascinating field with enormous potential in the field of wearable electronics: shirts with integrated electrodes, socks stimulating the blood circulation or heating clothing are just a few examples of wearable, smart textile products. Most often, the technology of choice for on-the-body-worn smart textiles is knitting as it results in stretchable and, hence comfortable garments. This presentation explores the knitting technology in respect to smart textiles giving an overview of current research activities as well as commercially available products on the market. It further intends to foster the transfer of research approaches into business applications as well as to develop new challenging research ideas.

40 CFR 410.50 - Applicability; description of the knit fabric finishing subcategory.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 40 Protection of Environment 28 2010-07-01 2010-07-01 true Applicability; description of the knit fabric finishing subcategory. 410.50 Section 410.50 Protection of Environment ENVIRONMENTAL PROTECTION... operations: Bleaching, mercerizing, dyeing, printing, resin treatment, water proofing, flame proofing, soil...

19 CFR 10.842 - Definitions.

Code of Federal Regulations, 2011 CFR

2011-04-01

... Harmonized Tariff Schedule of the United States; (j) Knit-to-shape articles. “Knit-to-shape,” when used with... the meanings indicated unless either the context in which they are used requires a different meaning..., 2010, and ending on December 19, 2011; (c) Customs territory of the United States. “Customs territory...

19 CFR 10.842 - Definitions.

Code of Federal Regulations, 2010 CFR

2010-04-01

... Harmonized Tariff Schedule of the United States; (j) Knit-to-shape articles. “Knit-to-shape,” when used with... the meanings indicated unless either the context in which they are used requires a different meaning..., 2010, and ending on December 19, 2011; (c) Customs territory of the United States. “Customs territory...

19 CFR 10.842 - Definitions.

Code of Federal Regulations, 2013 CFR

2013-04-01

... controls the production process in Haiti through a contractual relationship or other indirect means; (g... process in Haiti; (n) Self-start edge. “Self-start edge,” when used with reference to knit-to-shape... components with finished edges may be linked by yarn or thread as they are produced from the knitting machine...

19 CFR 10.842 - Definitions.

Code of Federal Regulations, 2014 CFR

2014-04-01

... controls the production process in Haiti through a contractual relationship or other indirect means; (g... process in Haiti; (n) Self-start edge. “Self-start edge,” when used with reference to knit-to-shape... components with finished edges may be linked by yarn or thread as they are produced from the knitting machine...

19 CFR 10.842 - Definitions.

Code of Federal Regulations, 2012 CFR

2012-04-01

... controls the production process in Haiti through a contractual relationship or other indirect means; (g... process in Haiti; (n) Self-start edge. “Self-start edge,” when used with reference to knit-to-shape... components with finished edges may be linked by yarn or thread as they are produced from the knitting machine...

75 FR 68394 - Small Business Size Standards: Waiver of the Nonmanufacturer Rule

Federal Register 2010, 2011, 2012, 2013, 2014

2010-11-05

... Woven and Knit impregnated with Flat Dipped Rubber/Plastic Gloves. SUMMARY: The U. S. Small Business... Flat Dipped Rubber/Plastic Gloves, under North American Industry Classification System (NAICS) code... Rule for Woven and Knit impregnated with Flat Dipped Rubber/Plastic Gloves under PSC 9999...

75 FR 52789 - Small Business Size Standards: Waiver of the Nonmanufacturer Rule

Federal Register 2010, 2011, 2012, 2013, 2014

2010-08-27

... for Woven and Knit impregnated with Flat Dipped Rubber/Plastic Gloves. SUMMARY: The U.S. Small... for woven and knit impregnated with flat dipped rubber/plastic gloves, under the North American... Dipped Rubber/Plastic Gloves manufacturers. If granted, the waiver would allow otherwise qualified small...

Towards the Knittability of Graphene Oxide Fibres

PubMed Central

Seyedin, Shayan; Romano, Mark S.; Minett, Andrew I.; Razal, Joselito M.

2015-01-01

Recent developments in graphene oxide fibre (GO) processing include exciting demonstrations of hand woven textile structures. However, it is uncertain whether the fibres produced can meet the processing requirements of conventional textile manufacturing. This work reports for the first time the production of highly flexible and tough GO fibres that can be knitted using textile machinery. The GO fibres are made by using a dry-jet wet-spinning method, which allows drawing of the spinning solution (the GO dispersion) in several stages of the fibre spinning process. The coagulation composition and spinning conditions are evaluated in detail, which led to the production of densely packed fibres with near-circular cross-sections and highly ordered GO domains. The results are knittable GO fibres with Young’s modulus of ~7.9 GPa, tensile strength of ~135.8 MPa, breaking strain of ~5.9%, and toughness of ~5.7 MJ m−3. The combination of suitable spinning method, coagulation composition, and spinning conditions led to GO fibres with remarkable toughness; the key factor in their successful knitting. This work highlights important progress in realising the full potential of GO fibres as a new class of textile. PMID:26459866

Needle bar for warp knitting machines

DOEpatents

Hagel, Adolf; Thumling, Manfred

1979-01-01

Needle bar for warp knitting machines with a number of needles individually set into slits of the bar and having shafts cranked to such an extent that the head section of each needle is in alignment with the shaft section accommodated by the slit. Slackening of the needles will thus not influence the needle spacing.

Knitting-Machine Operator (knit goods) 4-14.061--Technical Report.

ERIC Educational Resources Information Center

Manpower Administration (DOL), Washington, DC. U.S. Training and Employment Service.

The United States Training and Employment Service General Aptitude Test Battery (GATB), first published in 1947, has been included in a continuing program of research to validate the tests against success in many different occupations. The GATB consists of 12 tests which measure nine aptitudes: General Learning Ability; Verbal Aptitude; Numerical…

A facile fabrication of multifunctional knit polyester fabric based on chitosan and polyaniline polymer nanocomposite

NASA Astrophysics Data System (ADS)

Tang, Xiaoning; Tian, Mingwei; Qu, Lijun; Zhu, Shifeng; Guo, Xiaoqing; Han, Guangting; Sun, Kaikai; Hu, Xili; Wang, Yujiao; Xu, Xiaoqi

2014-10-01

Knit polyester fabric was successively modified and decorated with chitosan layer and polyaniline polymer nanocomposite layer in this paper. The fabric was firstly treated with chitosan to form a stable layer through the pad-dry-cure process, and then the polyaniline polymer nanocomposite layer was established on the outer layer by in situ chemical polymerization method using ammonium persulfate as oxidant and chlorhydric acid as dopant. The surface morphology of coated fabric was characterized by scanning electron microscopy (SEM), and the co-existence of chitosan layer and granular polyaniline polymer nanocomposite was confirmed and well dispersed on the fabric surface. The resultant fabric was endowed with remarkable electrical conductivity properties and efficient water-repellent capability, which also have been found stable after water laundering. In addition, the photocatalytic decomposition activity for reactive red dye was observed when the multifunctional knit polyester fabric was exposed to the illumination of ultraviolet lamp. These results indicated that chitosan and polyaniline polymer nanocomposite could form ideal multifunctional coatings on the surface of knit polyester fabric.

The properties of weft knitted fabric medical and preventive treatment action using eco-raw materials

NASA Astrophysics Data System (ADS)

Halavska, L.; Batrak, O.

2016-07-01

A new trend in the world is the clothing production using the new types of ecological raw materials application - milk, pineapple, coconut, hemp, banana, eucalyptus, clams, corn, bamboo, soya, nettle yarn. This makes it possible to create textile materials of new generation with unique antibacterial and antiseptic properties. Such materials have a positive preventive and sometimes therapeutic effect on people, and their health. Eco-raw materials clothing is able to protect the human body from the environment harmful effects: cold, heat, rain, dust, opportunely remove from underclothing layer the steam and gases, sweat; maintain in underclothing layer the necessary microclimate for normal organism functioning. Study of knitwear consumer properties, produced with eco-materials, is an urgent task of the world vector, directed on ecological environmental protection. This paper presents the research results of hygroscopicity and capillarity weft knitted fabrics, what knitted from different types of eco-raw materials: bamboo yarn, yarn containing soybean and nettle yarn. Character of influence of the liquid raising level changes depending on the experiment time and the knitting structure is revealed.

Experimental Observations of a Stitched Composite with a Notch Subjected to Combined Bending and Tension Loading

NASA Technical Reports Server (NTRS)

Palmer, Susan O.; Nettles, Alan T.; Poe, C. C.

1998-01-01

A series of tests was conducted to support development of an analytical model for predicting the failure strains of stitched warp-knit carbon/epoxy composite materials with through-thicknesss damage in the form of a crack-like notch. Measurements of strain near notch tips, crack opening displacement (COD), and applied load were monitored in all tests. The out-of-plane displacement at the center of the notch was also measured when the specimen was subjected to bending. Three types of loading were applied: pure bending, pure tension, and combined bending and tension.

SCARF: maximizing next-generation EST assemblies for evolutionary and population genomic analyses.

PubMed

Barker, Michael S; Dlugosch, Katrina M; Reddy, A Chaitanya C; Amyotte, Sarah N; Rieseberg, Loren H

2009-02-15

Scaffolded and Corrected Assembly of Roche 454 (SCARF) is a next-generation sequence assembly tool for evolutionary genomics that is designed especially for assembling 454 EST sequences against high-quality reference sequences from related species. The program was created to knit together 454 contigs that do not assemble during traditional de novo assembly, using a reference sequence library to orient the 454 sequences. SCARF is freely available at http://msbarker.com/software.htm, and is released under the open source GPLv3 license (http://www.opensource.org/licenses/gpl-3.0.html.

A constitutive model for the warp-weft coupled non-linear behavior of knitted biomedical textiles.

PubMed

Yeoman, Mark S; Reddy, Daya; Bowles, Hellmut C; Bezuidenhout, Deon; Zilla, Peter; Franz, Thomas

2010-11-01

Knitted textiles have been used in medical applications due to their high flexibility and low tendency to fray. Their mechanics have, however, received limited attention. A constitutive model for soft tissue using a strain energy function was extended, by including shear and increasing the number and order of coefficients, to represent the non-linear warp-weft coupled mechanics of coarse textile knits under uniaxial tension. The constitutive relationship was implemented in a commercial finite element package. The model and its implementation were verified and validated for uniaxial tension and simple shear using patch tests and physical test data of uniaxial tensile tests of four very different knitted fabric structures. A genetic algorithm with step-wise increase in resolution and linear reduction in range of the search space was developed for the optimization of the fabric model coefficients. The numerically predicted stress-strain curves exhibited non-linear stiffening characteristic for fabrics. For three fabrics, the predicted mechanics correlated well with physical data, at least in one principal direction (warp or weft), and moderately in the other direction. The model exhibited limitations in approximating the linear elastic behavior of the fourth fabric. With proposals to address this limitation and to incorporate time-dependent changes in the fabric mechanics associated with tissue ingrowth, the constitutive model offers a tool for the design of tissue regenerative knit textile implants. Copyright (c) 2010 Elsevier Ltd. All rights reserved.

Aligned poly(L-lactic-co-e-caprolactone) electrospun microfibers and knitted structure: a novel composite scaffold for ligament tissue engineering.

PubMed

Vaquette, Cédryck; Kahn, Cyril; Frochot, Céline; Nouvel, Cécile; Six, Jean-Luc; De Isla, Natalia; Luo, Li-Hua; Cooper-White, Justin; Rahouadj, Rachid; Wang, Xiong

2010-09-15

We developed a novel technique involving knitting and electrospinning to fabricate a composite scaffold for ligament tissue engineering. Knitted structures were coated with poly(L-lactic-co-e-caprolactone) (PLCL) and then placed onto a rotating cylinder and a PLCL solution was electrospun onto the structure. Highly aligned 2-microm-diameter microfibers covered the space between the stitches and adhered to the knitted scaffolds. The stress-strain tensile curves exhibited an initial toe region similar to the tensile behavior of ligaments. Composite scaffolds had an elastic modulus (150 +/- 14 MPa) similar to the modulus of human ligaments. Biological evaluation showed that cells proliferated on the composite scaffolds and they spontaneously orientated along the direction of microfiber alignment. The microfiber architecture also induced a high level of extracellular matrix secretion, which was characterized by immunostaining. We found that cells produced collagen type I and type III, two main components found in ligaments. After 14 days of culture, collagen type III started to form a fibrous network. We fabricated a composite scaffold having the mechanical properties of the knitted structure and the morphological properties of the aligned microfibers. It is difficult to seed a highly macroporous structure with cells, however the technique we developed enabled an easy cell seeding due to presence of the microfiber layer. Therefore, these scaffolds presented attractive properties for a future use in bioreactors for ligament tissue engineering. (c) 2010 Wiley Periodicals, Inc.

Younger and Older Adults' Use of Verb Aspect and World Knowledge in the Online Interpretation of Discourse

ERIC Educational Resources Information Center

Mozuraitis, Mindaugas; Chambers, Craig G.; Daneman, Meredyth

2013-01-01

Eye tracking was used to explore the role of grammatical aspect and world knowledge in establishing temporal relationships across sentences in discourse. Younger and older adult participants read short passages that included sentences such as "Mrs. Adams was knitting/knitted a new sweater"..."She wore her new garment...".…

Knitting Teacher: A Narrative Inquiry of a Researcher Who Has Been Researched

ERIC Educational Resources Information Center

Heydon, Rachel

2010-01-01

From the vantages of a teacher who has been researched and an educational researcher who has researched teachers, this inquiry constructs a knitted narrative from journals, letters, and stories written about my time teaching English studies in a remote First Nations' community and articles written about me when I was a research participant in a…

Recent developments in multi-layer flat knitting technology for waste free production of complex shaped 3D-reinforcing structures for composites

NASA Astrophysics Data System (ADS)

Trümper, W.; Lin, H.; Callin, T.; Bollengier, Q.; Cherif, C.; Krzywinski, S.

2016-07-01

Constantly increasing prices for raw materials and energy as well as the current discourse on the reduction of CO2-emissions places a special emphasis on the advantages of lightweight constructions and its resource conserving production methods. Fibre-reinforced composites are already seeing a number of applications in automobile, energy and mechanical engineering. Future applications within the named areas require greater material and energy efficiency and therefore manufacturing methods for textile preforms and lightweight constructions enabling an optimal arrangement of the reinforcing fibres while in the same time limiting waste to a minimum. One manufacturing method for textile reinforced preforms fulfilling quite many of the named requirements is the multilayer weft knitting technology. Multilayer weft knitted fabrics containing straight reinforcing yarns at least in two directions. The arrangement of these yarns is fixed by the loop yarn. Used yarn material in each knitting row is adaptable e. g. according to the load requirements or for the local integration of sensors. Draping properties of these fabrics can be varied within a great range and through this enabling draping of very complex shaped 3D-preforms without wrinkles from just one uncut fabric. The latest developments at ITM are concentrating on the development of a full production chain considering the 3D-CAD geometry, the load analysis, the generation of machine control programs as well as the development of technology and machines to enable the manufacturing of innovative net shape 3D-multilayer weft knitted fabrics such as complex shaped spacer fabrics and tubular fabrics with biaxial reinforcement.

Tricot-Knitting-Machine Operator (knit goods) 685.885--Technical Report on Development of USTES Aptitude Test Battery.

ERIC Educational Resources Information Center

Manpower Administration (DOL), Washington, DC. U.S. Training and Employment Service.

The United States Training and Employment Service General Aptitude Test Battery (GATB), first published in 1947, has been included in a continuing program of research to validate the tests against success in many different occupations. The GATB consists of 12 tests which measure nine aptitudes: General Learning Ability; Verbal Aptitude; Numerical…

Effect of Stretching on Ultraviolet Protection of Cotton and Cotton/Coolmax Blended Weft Knitted Fabric in a Wet State

PubMed Central

Kan, Chi-wai; Yam, Lim-yung; Ng, Sun-pui

2014-01-01

In this paper, the ultraviolet protection factor (UPF) of plain knitted fabrics made from 20Ne cotton yarns, Coolmax yarn and their combinations in wet, relaxed and stretched states were studied. According to the fiber composition, fabric samples are divided into three groups including Group I (single cotton yarn), Group II (cotton/cotton combination) and Group III (Coolmax/cotton combination) for discussion. In order to study the effect of wet condition on the UPF of different plain knitted fabrics, five wetting solutions, namely: (i) chlorinated pool water; (ii) sea water, (iii) acidic perspiration; (iv) alkaline perspiration and (v) deionized water (DI water) were prepared and the fabrics were wetted with different percentages of 50%, 75% and 100%. The UPF of the plain knitted fabrics in wet, relaxed and stretched states was measured and the results were discussed. In addition, yarn and fabric properties such as yarn tenacity, yarn strength, fiber combination and water vapor transmission, which affect the corresponding UPF values, were used for generating a prediction model in order to determine UPF. Verification of the prediction model was also conducted. PMID:28788440

Heat Treatment of Tools in Light Industry

NASA Astrophysics Data System (ADS)

Petukhov, V. A.

2005-09-01

Heat treatment processes for some tools (knitting needles, travelers for thimbles of spinning and doubling frames, thread-forming spinnerets) used for the production of cloths, hosiery, and other articles) in the knitting and textile industries are considered. Problems of the choice of steel and the kind and parameters of heat treatment are discussed in connection with the special features of tool design and operating conditions.

Some Effects of a Skill Learned in Youth on Relearning in Later Maturity and Old Age.

ERIC Educational Resources Information Center

Kiss, Rosalia Ann

A study was made of the relative merits of recall and learning in providing older persons with a choice of activity. Data were collected on the knitting performance of 73 subjects. A form of pretest-posttest experimental design with nine subgroups was used. Subjects were grouped by age (45-65 versus 65 and over) experience with knitting (no…

Industrial applications of multiaxial warp knit composites

NASA Technical Reports Server (NTRS)

Kaufmann, James R.

1992-01-01

Over the past few years, multiaxial warp knit (MWK) fabrics have made significant inroads into the industrial composites arena. This paper examines the use of MWK fabrics in industrial composite applications. Although the focus is on current applications of MWK fabrics in composites, this paper also discusses the physical properties, advantages and disadvantages of MWK fabrics. The author also offers possibilities for the future of MWK fabrics in the industrial composites arena.

Blooming Knit Flowers: Loop-Linked Soft Morphing Structures for Soft Robotics.

PubMed

Han, Min-Woo; Ahn, Sung-Hoon

2017-04-01

A loop-linked structure, which is capable of morphing in various modes, including volumetric transformation, is developed based on knitting methods. Morphing flowers (a lily-like, a daffodil-like, gamopetalous, and a calla-like flower) are fabricated using loop patterning, and their blooming motion is demonstrated by controlling a current that selectively actuates the flowers petals. © 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

JPRS Report. Soviet Union, International Affairs.

DTIC Science & Technology

1989-08-15

dresses, jackets, and furniture uphol- stery, capacities to manufacture panty hose, shoes, paints, and toothpaste are being refitted. Clothing and...enterprises. As a result the annual production of knitted wear will increase by 22.5 million units, that of panty hose by 200 million pairs. Production of...new and high-fashion types of panty hose, knitted outer wear made from lighter linen, highly elastic bathing suits, and clothing for leisure and

Development of a socket-type rib coaptation device made of poly-L-lactide fibers: feasibility study in a canine model

PubMed Central

Komatsu, Teruya; Sakaguchi, Yasuto; Muranishi, Yusuke; Yutaka, Yojiro; Date, Hiroshi; Nakamura, Tatsuo

2018-01-01

Background Costal coaptation pins made of poly-L-lactide (PLA) are clinically available for fixing surgically divided ribs. However, the clinical results of such rib fixation have not been completely satisfactory. We aimed to develop a new rib coaptation socket system and explore its clinical applicability. Methods We surgically divided three consecutive ribs of each beagle dog, and rib coaptation sockets were implanted to stabilize each rib. Fifteen 3-dimensional (3D)-printed and 30 PLA fiber knitted sockets were implanted in five and ten dogs, respectively, to stabilize the artificially divided ribs. Mechanical analysis of the sockets and radiographical examination of costal fixation were performed to evaluate the effectiveness of the newly developed socket system for rib stabilization. Results All 15 ribs with 3D-printed sockets had displaced 1 month after the operation. Three ribs in one dog with implanted PLA fiber knitted sockets were displaced radiographically after 1 month, and the grade of displacement remained unchanged after 6 months. The remaining 27 ribs fixed with PLA fiber knitted sockets did not show any displacement. Conclusions The PLA fiber knitted rib coaptation socket system was sufficiently durable for the stabilization of divided ribs with biocompatibility. This promising finding can be applied for clinical stabilization of divided ribs. PMID:29850125

Three-dimensionally deformable, highly stretchable, permeable, durable and washable fabric circuit boards.

PubMed

Li, Qiao; Tao, Xiao Ming

2014-11-08

This paper reports fabric circuit boards (FCBs), a new type of circuit boards, that are three-dimensionally deformable, highly stretchable, durable and washable ideally for wearable electronic applications. Fabricated by using computerized knitting technologies at ambient dry conditions, the resultant knitted FCBs exhibit outstanding electrical stability with less than 1% relative resistance change up to 300% strain in unidirectional tensile test or 150% membrane strain in three-dimensional ball punch test, extraordinary fatigue life of more than 1 000 000 loading cycles at 20% maximum strain, and satisfactory washing capability up to 30 times. To the best of our knowledge, the performance of new FCBs has far exceeded those of previously reported metal-coated elastomeric films or other organic materials in terms of changes in electrical resistance, stretchability, fatigue life and washing capability as well as permeability. Theoretical analysis and numerical simulation illustrate that the structural conversion of knitted fabrics is attributed to the effective mitigation of strain in the conductive metal fibres, hence the outstanding mechanical and electrical properties. Those distinctive features make the FCBs particularly suitable for next-to-skin electronic devices. This paper has further demonstrated the application potential of the knitted FCBs in smart protective apparel for in situ measurement during ballistic impact.

Development of a socket-type rib coaptation device made of poly-L-lactide fibers: feasibility study in a canine model.

PubMed

Komatsu, Teruya; Sato, Toshihiko; Sakaguchi, Yasuto; Muranishi, Yusuke; Yutaka, Yojiro; Date, Hiroshi; Nakamura, Tatsuo

2018-04-01

Costal coaptation pins made of poly-L-lactide (PLA) are clinically available for fixing surgically divided ribs. However, the clinical results of such rib fixation have not been completely satisfactory. We aimed to develop a new rib coaptation socket system and explore its clinical applicability. We surgically divided three consecutive ribs of each beagle dog, and rib coaptation sockets were implanted to stabilize each rib. Fifteen 3-dimensional (3D)-printed and 30 PLA fiber knitted sockets were implanted in five and ten dogs, respectively, to stabilize the artificially divided ribs. Mechanical analysis of the sockets and radiographical examination of costal fixation were performed to evaluate the effectiveness of the newly developed socket system for rib stabilization. All 15 ribs with 3D-printed sockets had displaced 1 month after the operation. Three ribs in one dog with implanted PLA fiber knitted sockets were displaced radiographically after 1 month, and the grade of displacement remained unchanged after 6 months. The remaining 27 ribs fixed with PLA fiber knitted sockets did not show any displacement. The PLA fiber knitted rib coaptation socket system was sufficiently durable for the stabilization of divided ribs with biocompatibility. This promising finding can be applied for clinical stabilization of divided ribs.

Swine Model of Thrombotic Caval Occlusion Created by Autologous Thrombus Injection with Assistance of Intra-caval Net Knitting

PubMed Central

Shi, Wan-Yin; Wu, Shuang; Hu, Lan-Yue; Liu, Chang-Jian; Gu, Jian-Ping

2015-01-01

To evaluate the feasibility of a swine model of thrombotic inferior vena cava (IVC) occlusion (IVCO) created by autologous thrombus injection with assistance of intra-caval net knitting. Sixteen pigs were included and divided into two groups: Group A (n = 10), IVCO model created by knitting a caval net followed by autologous thrombus injection; Group B (n = 6), control model created by knitting a net and normal saline injection. Venography was performed to assess each model and the associated thrombotic occlusion. The vessels were examined histologically to analyse the pathological changes postoperatively. IVCO model was successfully created in 10 animals in Group A (100%). Immediate venography showed extensive clot burden in the IVC. Postoperative venography revealed partial caval occlusion at 7 days, and complete occlusion coupled with collateral vessels at 14 days. Histologically, Group A animals had significantly greater venous wall thickening, with CD163-positive and CD3-positive cell infiltration. Recanalization channels were observed at the margins of the thrombus. By contrast, no thrombotic occlusion of the IVC was observed in Group B. The thrombotic IVCO model can be reliably established in swine. The inflammatory reaction may contribute to the caval thrombus propagation following occlusion. PMID:26680253

Three-dimensionally deformable, highly stretchable, permeable, durable and washable fabric circuit boards

PubMed Central

Li, Qiao; Tao, Xiao Ming

2014-01-01

This paper reports fabric circuit boards (FCBs), a new type of circuit boards, that are three-dimensionally deformable, highly stretchable, durable and washable ideally for wearable electronic applications. Fabricated by using computerized knitting technologies at ambient dry conditions, the resultant knitted FCBs exhibit outstanding electrical stability with less than 1% relative resistance change up to 300% strain in unidirectional tensile test or 150% membrane strain in three-dimensional ball punch test, extraordinary fatigue life of more than 1 000 000 loading cycles at 20% maximum strain, and satisfactory washing capability up to 30 times. To the best of our knowledge, the performance of new FCBs has far exceeded those of previously reported metal-coated elastomeric films or other organic materials in terms of changes in electrical resistance, stretchability, fatigue life and washing capability as well as permeability. Theoretical analysis and numerical simulation illustrate that the structural conversion of knitted fabrics is attributed to the effective mitigation of strain in the conductive metal fibres, hence the outstanding mechanical and electrical properties. Those distinctive features make the FCBs particularly suitable for next-to-skin electronic devices. This paper has further demonstrated the application potential of the knitted FCBs in smart protective apparel for in situ measurement during ballistic impact. PMID:25383032

Evaluation of textiles proposed for spacecraft crew apparel

NASA Technical Reports Server (NTRS)

Duncan, W. C.

1976-01-01

Textiles proposed for spacecraft wearing apparel were tested for possible primary irritancy and allergenicity using guinea pigs and human subjects. The materials submitted for testing were: (1) blue, loosely knit fabric of a copolymer of chlorotrifluoroethylene and ethylene (CTFE), (2) a white fabric, 100% cotton double knit, treated with fire retardant Tetrakis (hydroxymethyl) phosphonium hydroxide/ammonia, and (3) a gold colored polyimide fabric. There were no adverse reactions to any of the fabrics.

Entropy Generation Analysis through Helical Coil Heat Exchanger in an Agitated Vessel

NASA Astrophysics Data System (ADS)

Ashok Reddy, K.

2018-03-01

Entropy Generation have been obtained while conducting the experiments for different sodium carboxymethyl cellulose concentrations 0.05%,0.1%,0.15% and 0.2% of Newtonian and non Newtonian fluids and the data made available by passing the test fluid at different flow rates through a helical coil in a mixing coil using paddle impeller. Heating of fluids depend on operational parameters, geometry of the mixing vessel and the type of impeller used. A new design of heating element was design and fabricated by providing kanthal wire inserted into a glove knitted with fiber glass yarn as glass fabric is flexible, heat resistant and can accommodate to adopt small difference in size of the vessel, perfectly. The knitted fabric is made to the shape of vessel used in the experiment and the heating elements are inserted so that it gets embedded and forms part of the glove knitted with yarn of fiber glass.

New single-layer compression bandage system for chronic venous leg ulcers.

PubMed

Lee, Gillian; Rajendran, Subbiyan; Anand, Subhash

A new single-layer bandage system for the treatment of venous leg ulcers has been designed and developed at the University of Bolton. This three-dimensional (3D) knitted spacer fabric structure has been designed by making use of mathematical modelling and Laplace's law. The sustained graduated compression of the developed 3D knitted spacer bandages were tested and characterized, and compared with that of commercially available compression bandages. It was observed that the developed 3D single-layer bandage meets the ideal criteria stipulated for compression therapy. The laboratory results were verified by carrying out a pilot user study incorporating volunteers from different age groups. This article examines the insight into the design and development of the new 3D knitted spacer bandage, along with briefly discussing the issues of compression therapy systems intended for the treatment of venous leg ulcers.

Knitting and weaving artificial muscles

PubMed Central

Maziz, Ali; Concas, Alessandro; Khaldi, Alexandre; Stålhand, Jonas; Persson, Nils-Krister; Jager, Edwin W. H.

2017-01-01

A need exists for artificial muscles that are silent, soft, and compliant, with performance characteristics similar to those of skeletal muscle, enabling natural interaction of assistive devices with humans. By combining one of humankind’s oldest technologies, textile processing, with electroactive polymers, we demonstrate here the feasibility of wearable, soft artificial muscles made by weaving and knitting, with tunable force and strain. These textile actuators were produced from cellulose yarns assembled into fabrics and coated with conducting polymers using a metal-free deposition. To increase the output force, we assembled yarns in parallel by weaving. The force scaled linearly with the number of yarns in the woven fabric. To amplify the strain, we knitted a stretchable fabric, exhibiting a 53-fold increase in strain. In addition, the textile construction added mechanical stability to the actuators. Textile processing permits scalable and rational production of wearable artificial muscles, and enables novel ways to design assistive devices. PMID:28138542

Handbook of Analytical Methods for Textile Composites

NASA Technical Reports Server (NTRS)

Cox, Brian N.; Flanagan, Gerry

1997-01-01

The purpose of this handbook is to introduce models and computer codes for predicting the properties of textile composites. The handbook includes several models for predicting the stress-strain response all the way to ultimate failure; methods for assessing work of fracture and notch sensitivity; and design rules for avoiding certain critical mechanisms of failure, such as delamination, by proper textile design. The following textiles received some treatment: 2D woven, braided, and knitted/stitched laminates and 3D interlock weaves, and braids.

Metabolic response of granulocytes and platelets to synthetic vascular grafts: preliminary results with an in vitro technique.

PubMed

Pärsson, H; Nässberger, L; Thörne, J; Norgren, L

1995-04-01

The metabolism of granulocytes as well as platelets evoked by incubation with different synthetic vascular grafts was monitored during 6-h batch experiments using microcalorimetry. Standard knitted Dacron grafts, ePTFE-grafts, knitted Dacron grafts with collagen impregnation, and knitted Dacron grafts with external collagen-coating were used. The heat production per cell was calculated. A rapid increase of metabolic activity followed by a gradual decrease was demonstrated with both granulocyte suspension and platelet concentrate. Significant differences were obtained between the materials with a maximum response of Dacron grafts with collagen impregnation for both granulocyte and platelet response. The materials had different surface morphologies regarding cell adhesion after incubation as demonstrated with scanning electron microscopy with more pronounced adhesion on the collagen-impregnated grafts. The results suggest that microcalorimetry may be useful for the evaluation of cellular reactions on different biomaterials. However, further studies have to reveal the specificity of the reactions.

Color prediction in textile application

NASA Astrophysics Data System (ADS)

De Lucia, Maurizio; Buonopane, Massimo

2004-09-01

Nowadays production systems of fancy yarns for knits allow the creation of extremely complex products in which many effects are obtained by means of color alteration. Current production technique consists in defining type and quantity of fibers by making preliminary samples. This samples are then compared with a reference one. This comparison is based on operator experience. Many samples are required in order to achieve a sample similar to the reference one. This work requires time and then additional costs for a textile manufacturer. In addition, the methodology is subjective. Nowadays, spectrophotometers are the only devices that seem to be able to provide objective indications. They are based on a spectral analysis of the light reflected by the knit material. In this paper the study of a new method for color evaluation of a mix of wool fibers with different colors is presented. First of all fiber characterization were carried out through scattering and absorption coefficients using the Kubelka-Munk theory. Then the estimated color was compared with a reference item, in order to define conformity by means of objective parameters. Finally, theoretical characterization was compared with the measured quantity. This allowed estimation of prediction quality.

A knitted garment using intarsia technique for Heart Rate Variability biofeedback: Evaluation of initial prototype.

PubMed

Abtahi, F; Ji, G; Lu, K; Rödby, K; Seoane, F

2015-01-01

Heart rate variability (HRV) biofeedback is a method based on paced breathing at specific rate called resonance frequency by giving online feedbacks from user respiration and its effect on HRV. Since the HRV is also influence by different factors like stress and emotions, stress related to an unfamiliar measurement device, cables and skin electrodes may cover the underling effect of such kind of intervention. Wearable systems are usually considered as intuitive solutions which are more familiar to the end-user and can help to improve usability and hence reducing the stress. In this work, a prototype of a knitted garment using intarsia technique is developed and evaluated. Results show the satisfactory level of quality for Electrocardiogram and thoracic electrical bioimpedance i.e. for respiration monitoring as a part of HRV biofeedback system. Using intarsia technique and conductive yarn for making the connection instead of cables will reduce the complexity of fabrication in textile production and hence reduce the final costs in a final commercial product. Further development of garment and Android application is ongoing and usability and efficiency of final prototype will be evaluated in detail.

Knitted polylactide 96/4 L/D structures and scaffolds for tissue engineering: Shelf life, in vitro and in vivo studies

PubMed Central

Ellä, Ville; Annala, Tuija; Länsman, Satu; Nurminen, Manu; Kellomäki, Minna

2011-01-01

This study covers the whole production cycle, from biodegradable polymer processing to an in vivo tissue engineered construct. Six different biodegradable polylactide 96/4 L/D single jersey knits were manufactured using either four or eight multifilament fiber batches. The properties of those were studied in vitro for 42 weeks and in 0- to 3-year shelf life studies. Three types (Ø 12, 15 and 19 mm) of cylindrical scaffolds were manufactured from the knit, and the properties of those were studied in vitro for 48 weeks. For the Ø 15 mm scaffold type, mechanical properties were also studied in a one-year in vivo experiment. The scaffolds were implanted in the rat subcutis. All the scaffolds were g-irradiated prior to the studies. In vitro, all the knits lost 99% of their mechanical strength in 30 weeks. In the three-year follow up of shelf life properties, there was no decrease in the mechanical properties due to the storage time and only a 12% decrease in molecular weight. The in vitro and in vivo scaffolds lost their mechanical properties after 1 week. In the case of the in vivo samples, the mechanical properties were restored again, stepwise, by the presence of growing/maturing tissue between weeks 3 and 12. Faster degradation was observed with in vitro scaffolds compared to in vivo scaffolds during the one-year follow up. PMID:23507732

Thermoregulatory Responses to Intermittent Exercise Are Influenced by Knit Structure of Underwear

DTIC Science & Technology

1990-01-01

determined at 120 min, when Swo,(K3) and Swt(K4) were lower compared to both Sw,,(K2) and Swot (K5) 400 (Fig. 3). 300 Skin wettednessEE The knit...dew Pugh LGC (1966) Clothing insulation and accidential hypo- point temperature sensor. J Appl Physiol 52: 1658- 1660 thermia in youth. Nature 209: 1281...insulation. J Appl Physiol 8:539-545 cise and thermal stress. Physiol Rev 54:75-159 Hardy JI), )uBois EF (1938) Basal metabolism, radiation, Saltin B

Modifying the mechanical properties of silk nanofiber scaffold by knitted orientation for regenerative medicine applications.

PubMed

Dodel, M; Hemmati Nejad, N; Bahrami, S H; Soleimani, M; Hanaee-Ahvaz, H

2016-08-31

Tissue reconstruction is among the increasing applications of polymer nanofibers. Fibrous scaffolds (mats) can be easily produced using the electrospinning method with structure and biomechanical properties similar to those of a cellular matrix. Electrospinning is widely used in the production of nanofibers and the GAP-method electrospinning is one of the means of producing fully aligned nanofibers. In this research, using the GAP-method, knitted fibrous scaffolds were made of silk fibroin, which is a biocompatible and biodegradable polymer. To extract fibroin from cocoons, the sodium chloride solution as well as dialysis and freeze-drying techniques were employed. The molecular weight of the extracted fibroin was measured with the SDS-Page electrophoresis technique. Moreover, the pure fibroin structure was examined using the ATR-FTIR method, and the viscosity of the solution used for electrospinning was measured with the Brookfield rotational viscometer. The scaffolds were prepared through electrospinning of the silk fibroin in pure formic acid solution. The following three structures were electrospun: 1) a random structure; 2) a knitted structure with an interstitial angle of 60 degrees; 3) a knitted structure with an interstitial angle of 90 degrees. Morphology of the resulting fibers was studied with a SEM (scanning electron microscope). Fibroin scaffolds are degradable in water. Therefore, they were fixated through immersion in methanol to be prepared for assays. The mechanical properties of the scaffolds were also studied using a tensile strength test device. The effect of methanol on the strength properties of the samples was also assessed. The hydrophilic potential of the samples was measured via a contact angle test. To increase the hydrophilicity of the scaffold surfaces, the cold oxygen plasma technique was employed. Finally, the biocompatibility and cell adhesion of the resulting scaffolds were examined through a HEK 293 cell culture, and the results were analyzed through the MTT, DAPI staining, and SEM imaging techniques. Results revealed that the oriented knitted structure contributed to the increase in Young's modulus and the maximum strength of scaffolds as compared to the random samples. Moreover, this structure can also be a suitable alternative to the typical chemical means of increasing strength.

Unit cell geometry of multiaxial preforms for structural composites

NASA Technical Reports Server (NTRS)

Ko, Frank; Lei, Charles; Rahman, Anisur; Du, G. W.; Cai, Yun-Jia

1993-01-01

The objective of this study is to investigate the yarn geometry of multiaxial preforms. The importance of multiaxial preforms for structural composites is well recognized by the industry but, to exploit their full potential, engineering design rules must be established. This study is a step in that direction. In this work the preform geometry for knitted and braided preforms was studied by making a range of well designed samples and studying them by photo microscopy. The structural geometry of the preforms is related to the processing parameters. Based on solid modeling and B-spline methodology a software package is developed. This computer code enables real time structural representations of complex fiber architecture based on the rule of preform manufacturing. The code has the capability of zooming and section plotting. These capabilities provide a powerful means to study the effect of processing variables on the preform geometry. the code also can be extended to an auto mesh generator for downstream structural analysis using finite element method. This report is organized into six sections. In the first section the scope and background of this work is elaborated. In section two the unit cell geometries of braided and multi-axial warp knitted preforms is discussed. The theoretical frame work of yarn path modeling and solid modeling is presented in section three. The thin section microscopy carried out to observe the structural geometry of the preforms is the subject in section four. The structural geometry is related to the processing parameters in section five. Section six documents the implementation of the modeling techniques into the computer code MP-CAD. A user manual for the software is also presented here. The source codes and published papers are listed in the Appendices.

Modeling and testing of a knitted-sleeve fluidic artificial muscle

NASA Astrophysics Data System (ADS)

Ball, Erick J.; Meller, Michael A.; Chipka, Jordan B.; Garcia, Ephrahim

2016-11-01

The knitted-sleeve fluidic muscle is similar in design to a traditional McKibben muscle, with a separate bladder and sleeve. However, in place of a braided sleeve, it uses a tubular-knit sleeve made from a thin strand of flexible but inextensible yarn. When the bladder is pressurized, the sleeve expands by letting the loops of fiber slide past each other, changing the dimensions of the rectangular cells in the stitch pattern. Ideally, the internal volume of the sleeve would reach a maximum when its length has contracted by 2/3 from its maximum length, and although this is not reachable in practice, preliminary tests show that free contraction greater than 50% is achievable. The motion relies on using a fiber with a low coefficient of friction in order to reduce hysteresis to an acceptable level. In addition to increased stroke length, potential advantages of this technique include slower force drop-off during the stroke, more useable energy in certain applications, and greater similarity to the force-length relationship of skeletal muscle. Its main limitation is its potentially greater effect from friction compared to other fluidic muscle designs.

Towards an ideal polymer scaffold for tendon/ligament tissue engineering

NASA Astrophysics Data System (ADS)

Sahoo, Sambit; Ouyang, Hong Wei; Goh, James Cho-Hong; Tay, Tong-Earn; Toh, Siew Lok

2005-04-01

Tissue engineering holds promise in treating injured tendons and ligaments by replacing the injured tissues with "engineered tissues" with identical mechanical and functional characteristics. A biocompatible, biodegradable, porous scaffold with optimized architecture, sufficient surface area for cell attachment, growth and proliferation, faborable mechanical properties, and suitable degradation rate is a pre-requisite to achieve success with this aproach. Knitted poly(lactide-co-glycolide) (PLGA) scaffolds comprising of microfibers of 25 micron diameter were coated with PLGA nanofibers on their surfaces by electrospinning technique. A cell suspension of pig bone marrow stromal cells (BMSC) was seeded on the scaffolds by pipetting, and the cell-scaffold constructs were cultured in a CO2 incubator, at 37°C for 1-2 weeks. The "engineered tissues" were then assessed for cell attachment and proliferation, tissue formation, and mechanical properties. Nanofibers, of diameter 300-900 nm, were spread randomly over the knitted scaffold. The reduction in pore-size from about 1 mm (in the knitted scaffold) to a few micrometers (in the nano-microscaffold) allowed cell seeding by direct pipetting, and eliminated the need of a cell-delivery system like fibrin gel. BMSCs were seen to attach and proliferate well on the nano-microscaffold, producing abundant extracellular matrix. Mechanical testing revealed that the cell-seeded nano-microscaffolds possessed slightly higher values of failure load, elastic-region stiffness and toe-region stiffness, than the unseeded scaffolds. The combination of superior mechanical strength and integrity of knitted microfibers, with the large surface area and improved hydrophilicity of the electrospun nanofibers facilitated cell attachment and new tissue formation. This holds promise in tissue engineering of tendon/ligament.

Structure and yarn sensor for fabric

DOEpatents

Mee, David K.; Allgood, Glenn O.; Mooney, Larry R.; Duncan, Michael G.; Turner, John C.; Treece, Dale A.

1998-01-01

A structure and yarn sensor for fabric directly determines pick density in a fabric thereby allowing fabric length and velocity to be calculated from a count of the picks made by the sensor over known time intervals. The structure and yarn sensor is also capable of detecting full length woven defects and fabric. As a result, an inexpensive on-line pick (or course) density measurement can be performed which allows a loom or knitting machine to be adjusted by either manual or automatic means to maintain closer fiber density tolerances. Such a sensor apparatus dramatically reduces fabric production costs and significantly improves fabric consistency and quality for woven or knitted fabric.

Structure and yarn sensor for fabric

DOEpatents

Mee, D.K.; Allgood, G.O.; Mooney, L.R.; Duncan, M.G.; Turner, J.C.; Treece, D.A.

1998-10-20

A structure and yarn sensor for fabric directly determines pick density in a fabric thereby allowing fabric length and velocity to be calculated from a count of the picks made by the sensor over known time intervals. The structure and yarn sensor is also capable of detecting full length woven defects and fabric. As a result, an inexpensive on-line pick (or course) density measurement can be performed which allows a loom or knitting machine to be adjusted by either manual or automatic means to maintain closer fiber density tolerances. Such a sensor apparatus dramatically reduces fabric production costs and significantly improves fabric consistency and quality for woven or knitted fabric. 13 figs.

Design of a thermal waist-pad

NASA Astrophysics Data System (ADS)

Kursun Bahadir, S.; Sahin, U. K.; Acikgoz Tufan, H.

2017-10-01

The objective of the current study is designing a thermal waist-pad for people who have backaches with a sandwich-like multi-layered structure. Two model is developed; one is three-layered and second is five-layered with waterproof woven outer layer fabric, Thermolite® knitted fabric (for five-layered structures), wool knitted, polyester nonwoven fabric, polypropylene nonwoven fabric and viscose nonwoven fabric for mid-layer. 10 different structures are designed and produced. All samples are tested for thermal comfort properties of waist-pad. Multi-layer structures were tested, and according to their thermal performance and thermal comfort criteria, all results are evaluated for identifying the best product. These three factors are examined by analysis of thermal conductivity, thermal resistance, thermal absorptivity, relative water vapour/air permeability, water absorption. Highest thermal resistance test result, 150,42 mK/Wm2, is achieved in five-layered sandwich structure with waterproof fabric, Thermolite® fabric, wool based knitted fabric, Thermolite® fabric and waterproof fabric, respectively. Thermal conductivity result of this structure is 46,2 mW/mK, which is one of the lowest results among the alternative structures. Structures with Thermolite® fabric show higher thermal comfort when compared to others.

Finite element analysis of the stiffness of fabric reinforced composites

NASA Technical Reports Server (NTRS)

Foye, R. L.

1992-01-01

The objective of this work is the prediction of all three dimensional elastic moduli of textile fabric reinforced composites. The analysis is general enough for use with complex reinforcing geometries and capable of subsequent improvements. It places no restrictions on fabric microgeometry except that the unit cell be determinate and rectangular. The unit cell is divided into rectangular subcells in which the reinforcing geometries are easier to define and analyze. The analysis, based on inhomogeneous finite elements, is applied to a variety of weave, braid, and knit reinforced composites. Some of these predictions are correlated to test data.

Heat resistant protective hand covering

NASA Technical Reports Server (NTRS)

Sidman, K. R.; Arons, I. J. (Inventor)

1984-01-01

The heat resistant, protective glove is made up of first and second shell sections which define a palm side and a backside, respectively. The first shell section is made of a twill wave fabric of a temperature-resistant aromatic polyamide fiber. The second shell section is made of a knitted fabric of a temperature-resistant aromatic polyamide fiber. The first and second shell sections are secured to one another, e.g., by sewing, to provide the desired glove configuration and an opening for insertion of the wearer's hand. The protective glove also includes a first liner section which is secured to and overlies the inner surface of the first shell section and is made of a felt fabric of a temperature-resistant aromatic polyamide fiber and has a flame resistant, elastomenic coating on the surface facing and overlying the inner surface of the first shell section.

New Mycobacterium tuberculosis LAM sublineage with geographical specificity for the Old World revealed by phylogenetical and Bayesian analyses.

PubMed

Reynaud, Yann; Rastogi, Nalin

2016-12-01

We recently showed that the Mycobacterium tuberculosis sublineage LAM9 could be subdivided as two distinct subpopulations - each reflecting its unique biogeographical structure and evolutionary history. We subsequently attempted to verify if this genetic structuration could be traced in an enlarged global sample. For this purpose, we analyzed global evolutionary relationships of LAM strains in a large dataset (n = 1923 isolates from 35 countries worldwide) with concomitant spoligotyping and MIRU-VNTR data, followed by a deeper analysis of LAM9 sublineage (n = 851 isolates). Based on a combination of phylogenetical analysis and Bayesian statistics, a total of three different clusters, tentatively named LAM9C1, C2 and C3 were described in this dataset. Closer inspection of the phylogenetic tree with concomitant data on origin of isolates with genetic clusterization revealed LAM9C3 being the most tightly knit group exclusively found in the Old World as opposed to LAM9C2 being a loosely-knit group without any phylogeographical specificity; while LAM9C1 appeared with a majority of strains being well-clustered despite some isolates that intermixed with unrelated LAM clusters. Subsequently, we hereby describe a new M. tuberculosis LAM sublineage named LAM9C3 with phylogeographical specificity for the Old World. These findings open new perspectives to study respective migration histories and adaptation to human hosts of specific M. tuberculosis clones during the exploration and conquest of the New World. We therefore plan to reevaluate the nomenclature and evolutionary history of various LAM sublineages using Whole Genome Sequencing (WGS). Copyright © 2016 Elsevier Ltd. All rights reserved.

Methanex sticks to its knitting

DOE Office of Scientific and Technical Information (OSTI.GOV)

Morris, G.D.L.

1997-04-30

Methanex was created just six years ago by the breakup of Ocelot Industries (Calgary, AB), a conglomerate with too many different business and too much debt. Those demons have since been banished, but management remains obsessive about focused, low-cost operations and a squeaky-clean balance sheet. The results show in a company that is generally admired, occasionally resented, and always speculated about. The top two questions are what it will do with its cash hoard,more » $$413 million as of first-quarter 1997, and when it will diversify. Pierre Choquette, who became president in December 1994, hears the questions often but says he is more amused by them than irritated, because the answers are so obvious. {open_quotes}We review the situation at every board meeting, but usually we prefer to have the liquid assets - it gives you a lot of advantages - and to reinvest in the core business,{close_quotes} says Choquette. {open_quotes}We paid $$275 million for our second plant in Chile, which we just completed, and the third one now under construction will cost about $300 million. I sit on a nonchemical company`s board, and we wonder at every downturn, {open_quote}How are we going to survive?{close_quote} [Having a cushion] is a lot nicer.{close_quotes}« less

Investigation of the influence of textiles and surface treatments on blistering using a novel simulant.

PubMed

Guerra, C; Schwartz, C J

2012-02-01

Friction blisters occur when shear loading causes the separation of dermal layers. Consequences range from minor pain to life-threatening infection. Past research in blister formation has focused on in vivo experiments, which complicate a mechanics-based study of the phenomenon. A Synthetic Skin Simulant Platform (3SP) approach was developed to investigate the effect of textile fabrics (t-shirt knit and denim cottons) and surface treatments (dry and wet lubricants) on blister formation. 3SP samples consist of bonded elastomeric layers that are surrogates for various dermal layers. These layers display frictional and mechanical properties similar to their anatomical analogues. Blistering was assessed by the measurement of deboned area between layers. Denim caused greater blistering than did the t-shirt knit cotton, and both lubricants significantly reduced blister area and surface damage. A triglyceride-based lubricant had a more pronounced effect on blister reduction than corn starch. The triglyceride lubricant used with t-shirt knit cotton resulted in no blisters being formed. The performance of the 3SP approach follows previously reported frictional behavior of skin in vivo. The results of textile and surface treatment performance suggest that future 3SP iterations can be focused on specific anatomical sites based on application type. © 2011 John Wiley & Sons A/S.

In-Vitro Analysis of the Effect of Constructional Parameters and Dye Class on the UV Protection Property of Cotton Knitted Fabrics.

PubMed

Kan, Chi-Wai; Au, Chui-Ha

2015-01-01

Cotton knitted fabrics were manufactured with different yarn types (conventional ring spun yarn and torque-free ring spun yarn) with different fibre types (combed cotton and combed Supima cotton) and yarn fineness (Ne30 and Ne40). These fabrics were then dyed with three types of dye (reactive, direct and sulphur dye) with three dye concentrations (0.1%, 1.0% and 5.0% on-weight of fabric (owf)) in three colours (red, yellow and blue). This study examined the impact of constructional parameters and dyeing on ultraviolet (UV) protection properties of cotton knitted fabric. In-vitro test with spectrophotometer was used for evaluating the UV protection property of dyed cotton knitted fabrics. Among the six parameters investigated, fineness of yarn and dye concentration were the most significant factors affecting UPF while the color effect is the least significant. Experimental results revealed that the UPF value of dyed fabrics made from combed cotton is generally higher than the combed Supima cotton since combed cotton is composed of shorter fibres which facilitate the blocking or absorption of UV radiation. Second, fabrics made with twist yarn (i.e. ring spun yarn) have higher UPF value than the corresponding ESTex one (i.e. torque-free yarn) in general since fabrics made with ring spun yarn tend to shrink during wet processing and so it is more compact. Third, the UPF value of fabrics made with 30Ne yarn was higher than the 40Ne one since it is thicker and has lower fabric porosity. Fourth, fabrics dyed with lower concentration of dye gave the lowest UPF. Fifth, the sulphur dyed samples performed worse than the reactive and direct dyed samples in terms of UV protection property. Sixth, there is no significant difference in UPF for red, yellow and blue coloured fabrics. Seventh, this study also demonstrated that lightness of fabric is negatively related to UV protection property.

In-Vitro Analysis of the Effect of Constructional Parameters and Dye Class on the UV Protection Property of Cotton Knitted Fabrics

PubMed Central

2015-01-01

Cotton knitted fabrics were manufactured with different yarn types (conventional ring spun yarn and torque-free ring spun yarn) with different fibre types (combed cotton and combed Supima cotton) and yarn fineness (Ne30 and Ne40). These fabrics were then dyed with three types of dye (reactive, direct and sulphur dye) with three dye concentrations (0.1%, 1.0% and 5.0% on-weight of fabric (owf)) in three colours (red, yellow and blue). This study examined the impact of constructional parameters and dyeing on ultraviolet (UV) protection properties of cotton knitted fabric. In-vitro test with spectrophotometer was used for evaluating the UV protection property of dyed cotton knitted fabrics. Among the six parameters investigated, fineness of yarn and dye concentration were the most significant factors affecting UPF while the color effect is the least significant. Experimental results revealed that the UPF value of dyed fabrics made from combed cotton is generally higher than the combed Supima cotton since combed cotton is composed of shorter fibres which facilitate the blocking or absorption of UV radiation. Second, fabrics made with twist yarn (i.e. ring spun yarn) have higher UPF value than the corresponding ESTex one (i.e. torque-free yarn) in general since fabrics made with ring spun yarn tend to shrink during wet processing and so it is more compact. Third, the UPF value of fabrics made with 30Ne yarn was higher than the 40Ne one since it is thicker and has lower fabric porosity. Fourth, fabrics dyed with lower concentration of dye gave the lowest UPF. Fifth, the sulphur dyed samples performed worse than the reactive and direct dyed samples in terms of UV protection property. Sixth, there is no significant difference in UPF for red, yellow and blue coloured fabrics. Seventh, this study also demonstrated that lightness of fabric is negatively related to UV protection property. PMID:26222792

Mechanical Characteristics of Composite Knitted Stents

DOE Office of Scientific and Technical Information (OSTI.GOV)

Tokuda, Takanori, E-mail: tkdtknr@gmail.com; Shomura, Yuzo; Tanigawa, Noboru

2009-09-15

We used metal wires and fibers to fabricate a composite knitted stent and then compare the mechanical characteristics of this stent with those of a pure metallic stent of the same construction in order to develop a stent that offers a comparable degree of expandability as metallic stents but can be used for highly curved lesions that cannot be treated using metallic stents. We fabricated two types of composite knitted stent (N-Z stents), using nitinol wire with a diameter of 0.12 mm and polypara-phenylene-benzobisoxazole (PBO) multifilament fiber (Zyron AS; Toyobo, Osaka, Japan). Stents were knitted into a cylindrical shape usingmore » the same textile pattern as a Strecker stent. Two loop lengths (L) of nitinol wire were used in the N-Z stents: L = 1.84 mm (N-Z stent L = 1.84) and L = 2.08 mm (N-Z stent L = 2.08). For the sake of comparison, we fabricated a metallic stent of nitinol using the same textile pattern (N-N stent L = 1.92). We applied a radial compression force diametrically to each stent and applied a bending force diametrically at the free end of a stent with one end fixed in order to evaluate the relationship between stent elasticity and load values. In addition, we macroscopically evaluated the generation of kinks when the stent was bent 180{sup o}. The radial compressive force when the stent diameter was reduced by 53% was 6.44 N in the case of N-Z stent L = 1.84, 6.14 N in the case of N-Z stent L = 2.08, and 4.96 N in the case of N-N stent L = 1.92 mm. The composite stent had a radial compressive force higher than that of a metallic stent. The restoring force to longitudinal direction at a 90{sup o} bending angle was 0.005 N for N-Z stent L = 1.84, 0.003 N for N-Z stent L = 2.08, and 0.034 N for N-N stent L = 1.92. The restoring force of the composite stent was significantly lower. Finally, the composite stent generated no definitive kinks at a bending angle of 180{sup o}, regardless of loop length. However, the N-N stent clearly produced kinks, causing blockage of the inner cavity. In conclusion, the use of a metal and fiber composite in the construction of a knitted stent ensures an expansion performance comparable to that of metallic stents, while providing better kink resistance.« less

Direct patterning of organic conductors on knitted textiles for long-term electrocardiography

NASA Astrophysics Data System (ADS)

Takamatsu, Seiichi; Lonjaret, Thomas; Crisp, Dakota; Badier, Jean-Michel; Malliaras, George G.; Ismailova, Esma

2015-10-01

Wearable sensors are receiving a great deal of attention as they offer the potential to become a key technological tool for healthcare. In order for this potential to come to fruition, new electroactive materials endowing high performance need to be integrated with textiles. Here we present a simple and reliable technique that allows the patterning of conducting polymers on textiles. Electrodes fabricated using this technique showed a low impedance contact with human skin, were able to record high quality electrocardiograms at rest, and determine heart rate even when the wearer was in motion. This work paves the way towards imperceptible electrophysiology sensors for human health monitoring.

Textile-Based Weft Knitted Strain Sensors: Effect of Fabric Parameters on Sensor Properties

PubMed Central

Atalay, Ozgur; Kennon, William Richard; Husain, Muhammad Dawood

2013-01-01

The design and development of textile-based strain sensors has been a focus of research and many investigators have studied this subject. This paper presents a new textile-based strain sensor design and shows the effect of base fabric parameters on its sensing properties. Sensing fabric could be used to measure articulations of the human body in the real environment. The strain sensing fabric was produced by using electronic flat-bed knitting technology; the base fabric was produced with elastomeric yarns in an interlock arrangement and a conductive yarn was embedded in this substrate to create a series of single loop structures. Experimental results show that there is a strong relationship between base fabric parameters and sensor properties. PMID:23966199

Comparison of stiffness and interface pressure during rest and exercise among various arm sleeves.

PubMed

Hirai, M; Niimi, K; Iwata, H; Sugimoto, I; Ishibashi, H; Ota, T; Nakamura, H

2010-08-01

To compare the interface pressure during rest and exercise among various kinds of arm sleeves. The interface pressure underneath nine different arm sleeves was measured during 10 maximal opening and closing movements of fingers using a pressure transducer (Air Pack Type Analyser) in 16 healthy volunteers. Furthermore, in order to evaluate the characteristics of each arm sleeve, the extensibility, stiffness and thickness were determined in vitro by several apparatuses. There was a significant correlation between stiffness and extensibility. The stiffness was significantly correlated with the pressure difference between muscle contraction and relaxation during exercise. The higher the value of stiffness, the greater the pressure amplitude during exercise. Short-stretch arm sleeves characterized with a high level stiffness, including thick round- and flat-knitted arm sleeves, are more beneficial for the augmentation of muscle pumping than long-stretch arm sleeves, in the same way as short-stretch bandages or stockings applied to the leg.

African American Elders' Serious Illness Experiences: Narratives of "God Did," "God Will," and "Life Is Better".

PubMed

Coats, Heather; Crist, Janice D; Berger, Ann; Sternberg, Esther; Rosenfeld, Anne G

2017-04-01

The foundation of culturally sensitive patient-centered palliative care is formed from one's social, spiritual, psychological, and physical experiences of serious illness. The purpose of this study was to describe categories and patterns of psychological, social, and spiritual healing from the perspectives of aging seriously ill African American (AA) elders. Using narrative analysis methodology, 13 open-ended interviews were collected. Three main patterns were "prior experiences," "I changed," and "across past, present experiences and future expectations." Themes were categorized within each pattern: been through it . . . made me strong, I thought about . . . others, went down little hills . . . got me down, I grew stronger, changed priorities, do things I never would have done, quit doing, God did and will take care of me, close-knit relationships, and life is better. "Faith" in God helped the aging seriously ill AA elders "overcome things," whether their current illness or other life difficulties.

The effect of fabric structure on the mechanical properties of warp knitted surgical mesh for hernia repair.

PubMed

Mirjavan, Mohammad; Asayesh, Azita; Asgharian Jeddi, Ali Asghar

2017-02-01

Surgical mesh is being used for healing hernia, pelvic organ prolapse, skull injuries and urinary incontinence. In this research the effect of fabric structure on the mechanical properties of warp knitted surgical meshes in comparison to abdominal fascia has been investigated. For this purpose, warp knitted surgical mesh with five different structures (Tricot, Pin-hole-net, quasi-Sandfly, Sandfly and quasi-Marquissite) were produced using polypropylene monofilament. Thereafter, their mechanical properties such as uniaxial tensile behavior in various directions (wale-wise (90°), course-wise (0°) and diagonal (45°)), bending resistance and crease recovery were analyzed. The meshes demonstrated different elastic modulus in various directions, which can be attributed to the pore shape (pore angle) and underlap angle in the structure of mesh. Except Pin-hole-net mesh, other produced meshes exhibited better level of orthotropy in comparison to abdominal fascia. The most flexible mesh in both wale-wise and course-wise directions was quasi-Sandfly and thereafter quasi-Marquissite. Tricot and Pin-hole-net manifested the highest crease recovery in wale-wise and coursewise directions respectively. The most desirable mesh in terms of porosity was quasi-Marquissite mesh. Overall, the quasi-Marquissite mesh was selected as the most suitable surgical mesh considering all advantages and disadvantages of each produced mesh in this study. Copyright © 2016 Elsevier Ltd. All rights reserved.

Evaluation of High Temperature Knitted Spring Tubes for Structural Seal Applications

NASA Technical Reports Server (NTRS)

Taylor, Shawn C.; DeMange, Jeffrey J.; Dunlap, Patrick H., Jr.; Steinetz, Bruce M.

2004-01-01

Control surface seals are crucial to current and future space vehicles, as they are used to seal the gaps surrounding body flaps, elevons, and other actuated exterior surfaces. During reentry, leakage of high temperature gases through these gaps could damage underlying lower temperature structures such as rudder drive motors and mechanical actuators, resulting in impaired vehicle control. To be effective, control surface seals must shield lower temperature structures from heat transfer by maintaining sufficient resiliency to remain in contact with opposing sealing surfaces through multiple compression cycles. The current seal exhibits significant loss of resiliency after a few compression cycles at elevated temperatures (i.e., 1900 F) and therefore would be inadequate for advanced space vehicles. This seal utilizes a knitted Inconel X-750 spring tube as its primary resilient element. As part of a larger effort to enhance seal resiliency, researchers at the NASA Glenn Research Center performed high temperature compression testing (up to 2000 F) on candidate spring tube designs employing material substitutions and modified geometries. These tests demonstrated significant improvements in spring tube resiliency (5.5x better at 1750 F) through direct substitution of heat treated Rene 41 alloy in the baseline knit design. The impact of geometry modification was minor within the range of parameters tested, however trends did suggest that moderate resiliency improvements could be obtained by optimizing the current spring tube geometry.

Textile Supercapacitors

NASA Astrophysics Data System (ADS)

Jost, Kristy Alana

Innovative and interdisciplinary solutions to wearable textile energy storage are explored as power sources for wearable electronics and smart textiles. Due to their long cycle life, non-toxic and inexpensive materials, supercapacitors were converted into textiles. Textile supercapacitors were developed using scalable fabrication methods including screen-printing, yarn making, and 3D computerized knitting. The electrode materials reported in this thesis undergo thorough electrochemical analysis, and are capable of storing up to 0.5 F/cm2 which is on par with conventionally solid supercapacitors (0.6 F/cm2). Capacitive yarns are capable of storing up to 37 mF/cm and are shown to be knittable on industrial knitting equipment. Both are some of the highest reported capacitance for all-carbon systems in the field. Yet both are the only systems composed of inexpensive and non-toxic activated carbon, the most commonly used electrode material used in supercapacitors, opposed to carbon nanotubes or graphene, which are typically more 10-100 times more expensive. However, all of the fabrication techniques reported here are also capable of incorporating a wide variety of materials, ultimately broadening the applications of textile energy storage as a whole. Fully machine knitted supercapacitors are also explored and electrochemically characterized in order to determine how the textile structure affects the capacitance. In conclusion, a wide variety of fabrication techniques for making textile supercapacitors were successfully explored.

Kid's Play.

ERIC Educational Resources Information Center

Whalen, Susan L.

1998-01-01

Examines the use of fabric mesh knitting as canopies for children's playgrounds. Its benefits and drawbacks are addressed as are how innovative design and choice of materials can help eliminate function difficulties. (GR)

Intarsia-sensorized band and textrodes for real-time myoelectric pattern recognition.

PubMed

Brown, Shannon; Ortiz-Catalan, Max; Petersson, Joel; Rodby, Kristian; Seoane, Fernando

2016-08-01

Surface Electromyography (sEMG) has applications in prosthetics, diagnostics and neuromuscular rehabilitation. Self-adhesive Ag/AgCl are the electrodes preferentially used to capture sEMG in short-term studies, however their long-term application is limited. In this study we designed and evaluated a fully integrated smart textile band with electrical connecting tracks knitted with intarsia techniques and knitted textile electrodes. Real-time myoelectric pattern recognition for motor volition and signal-to-noise ratio (SNR) were used to compare its sensing performance versus the conventional Ag-AgCl electrodes. After a comprehending measurement and performance comparison of the sEMG recordings, no significant differences were found between the textile and the Ag-AgCl electrodes in SNR and prediction accuracy obtained from pattern recognition classifiers.

Direct patterning of organic conductors on knitted textiles for long-term electrocardiography

PubMed Central

Takamatsu, Seiichi; Lonjaret, Thomas; Crisp, Dakota; Badier, Jean-Michel; Malliaras, George G.; Ismailova, Esma

2015-01-01

Wearable sensors are receiving a great deal of attention as they offer the potential to become a key technological tool for healthcare. In order for this potential to come to fruition, new electroactive materials endowing high performance need to be integrated with textiles. Here we present a simple and reliable technique that allows the patterning of conducting polymers on textiles. Electrodes fabricated using this technique showed a low impedance contact with human skin, were able to record high quality electrocardiograms at rest, and determine heart rate even when the wearer was in motion. This work paves the way towards imperceptible electrophysiology sensors for human health monitoring. PMID:26446346

Running functional sport vest and short for e-textile applications

NASA Astrophysics Data System (ADS)

Baskan, H.; Acikgoz, H.; Atakan, R.; Eryuruk, H.; Akalın, N.; Kose, H.; Li, Y.; Kursun Bahadir, S.; Kalaoglu, F.

2017-10-01

Sports garments with functional properties have become crucial as well as comfort properties since they improve the wearer performance. For this reason, sport vest and short having high elastic recovery with fall detection sensor, were designed and produced by using flat-bed knitting machine. Comfort properties of short and vest were tested with several test instruments and; tensile strength of elastomeric yarn, air permeability, moisture management, drape and objective handle (FAST tests) of garments were achieved. It was proved that short and vest samples have good comfort properties as a functional sport garment. It was also tested that fall-detection sensor can work efficiently by using a mobile phone application.

Alien Sunset Artist Concept

NASA Image and Video Library

2007-03-29

Observations from NASA Spitzer Space Telescope have revealed that mature planetary systems -- dusty disks of asteroids, comets and possibly planets -- are more frequent around close-knit twin, or binary, stars than single stars like our sun.

[Total cavopulmonary connection using a knitted dacron prosthesis impregnated with gelatin (GELSEAL) as an intracardiac conduit].

PubMed

Iwaya, F; Tanji, M; Ono, T; Tsuda, A; Hoshino, S

1996-05-01

It is important to find a suitable vascular prosthesis as an intracardiac conduit for a total cavopulmonary connection because of the need for long-term patency. A 7-year-old girl with a double outlet of right ventricle, hypoplastic left ventricle, pulmonary atresia and single atrium with azygos connection underwent a total cavopulmonary connection using a knitted dacron prosthesis impregnated with gelatin (GELSEAL) as an intracardiac conduit. Her postoperative course was uneventful. GELSEAL is soft, easy to hand and effective at preventing blood loss. The conduit is also expected to have long-term patency because of good healing with thin and uniform pseudointimal formation. However, long-term patency especially in the right side of the heart is still unknown. She should be followed with close anticoagulant therapy and careful observation.

From industrially weavable and knittable highly conductive yarns to large wearable energy storage textiles.

PubMed

Huang, Yan; Hu, Hong; Huang, Yang; Zhu, Minshen; Meng, Wenjun; Liu, Chang; Pei, Zengxia; Hao, Chonglei; Wang, Zuankai; Zhi, Chunyi

2015-05-26

Wearable electronic textiles that store capacitive energy are a next frontier in personalized electronics. However, the lack of industrially weavable and knittable conductive yarns in conjunction with high capacitance, limits the wide-scale application of such textiles. Here pristine soft conductive yarns are continuously produced by a scalable method with the use of twist-bundle-drawing technique, and are mechanically robust enough to be knitted to a cloth by a commercial cloth knitting machine. Subsequently, the reduced-graphene-oxide-modified conductive yarns covered with a hierarchical structure of MnO2 nanosheets and a polypyrrole thin film were used to fabricate weavable, knittable and wearable yarn supercapacitors. The resultant modified yarns exhibit specific capacitances as high as 36.6 mF cm(-1) and 486 mF cm(-2) in aqueous electrolyte (three-electrode cell) or 31 mF cm(-1) and 411 mF cm(-2) in all solid-state two-electrode cell. The symmetric solid-state supercapacitor has high energy densities of 0.0092 mWh cm(-2) and 1.1 mWh cm(-3) (both normalized to the whole device) with a long cycle life. Large energy storage textiles are fabricated by weaving our flexible all-solid-state supercapacitor yarns to a 15 cm × 10 cm cloth on a loom and knitting in a woollen wrist band to form a pattern, enabling dual functionalities of energy storage capability and wearability.

Novel Third-Law Demonstration.

ERIC Educational Resources Information Center

Lonc, William

1995-01-01

Presents an easy method to demonstrate Third-Law interactions using identical button magnets sliding along a smooth (nonmagnetic) knitting needle. Explains the gravitational and magnetic interactions in the case of horizontal and vertical positions of the needle. (JRH)

Spool-Loom Creations Take Center Stage.

ERIC Educational Resources Information Center

Herberholz, Barbara

2002-01-01

Presents an art lesson in which students used the spool knitting technique to create finger puppets. Describes the process in detail for creating the puppets. Lists the learning objectives and the materials needed for the project. (CMK)

19 CFR 10.223 - Articles eligible for preferential treatment.

Code of Federal Regulations, 2010 CFR

2010-04-01

... “sleeve header,” of woven or weft-inserted warp knit construction and of coarse animal hair or man-made... expenses incurred in the growth, production, manufacture, or other processing of the components, findings...

19 CFR 10.223 - Articles eligible for preferential treatment.

Code of Federal Regulations, 2014 CFR

2014-04-01

... “sleeve header,” of woven or weft-inserted warp knit construction and of coarse animal hair or man-made... expenses incurred in the growth, production, manufacture, or other processing of the components, findings...

19 CFR 10.223 - Articles eligible for preferential treatment.

Code of Federal Regulations, 2011 CFR

2011-04-01

... “sleeve header,” of woven or weft-inserted warp knit construction and of coarse animal hair or man-made... expenses incurred in the growth, production, manufacture, or other processing of the components, findings...

19 CFR 10.223 - Articles eligible for preferential treatment.

Code of Federal Regulations, 2012 CFR

2012-04-01

... “sleeve header,” of woven or weft-inserted warp knit construction and of coarse animal hair or man-made... expenses incurred in the growth, production, manufacture, or other processing of the components, findings...

19 CFR 10.223 - Articles eligible for preferential treatment.

Code of Federal Regulations, 2013 CFR

2013-04-01

... “sleeve header,” of woven or weft-inserted warp knit construction and of coarse animal hair or man-made... expenses incurred in the growth, production, manufacture, or other processing of the components, findings...

37. MILL NO. 2, 2nd FLOOR, CLOSE SHOT OF 2 ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

37. MILL NO. 2, 2nd FLOOR, CLOSE SHOT OF 2 CREEL MACHINES, WHICH FEED YARN INTO KNITTING MACHINES. - Prattville Manufacturing Company, Number One, 242 South Court Street, Prattville, Autauga County, AL

Building D interior, looking south showing same stone wall as ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Building D interior, looking south showing same stone wall as it attaches to the east wall of Building D - Hinckley Knitting Mills, Building D, 21-35 East Wister Street, Philadelphia, Philadelphia County, PA

Feminist Framework Plus: Knitting Feminist Theories of Rape Etiology Into a Comprehensive Model.

PubMed

McPhail, Beverly A

2016-07-01

The radical-liberal feminist perspective on rape posits that the assault is motivated by power and control rather than sexual gratification and is a violent rather than a sexual act. However, rape is a complex act. Relying on only one early strand of feminist thought to explain the etiology of rape limits feminists' understanding of rape and the practice based upon the theory. The history of the adoption of the "power, not sex" theory is presented and the model critiqued. A more integrated model is developed and presented, the Feminist Framework Plus, which knits together five feminist theories into a comprehensive model that better explains the depth and breadth of the etiology of rape. Empirical evidence that supports each theory is detailed as well as the implications of the model on service provision, education, and advocacy. © The Author(s) 2015.

Wearable Atmospheric Pressure Plasma Fabrics Produced by Knitting Flexible Wire Electrodes for the Decontamination of Chemical Warfare Agents

PubMed Central

Jung, Heesoo; Seo, Jin Ah; Choi, Seungki

2017-01-01

One of the key reasons for the limited use of atmospheric pressure plasma (APP) is its inability to treat non-flat, three-dimensional (3D) surface structures, such as electronic devices and the human body, because of the rigid electrode structure required. In this study, a new APP system design—wearable APP (WAPP)—that utilizes a knitting technique to assemble flexible co-axial wire electrodes into a large-area plasma fabric is presented. The WAPP device operates in ambient air with a fully enclosed power electrode and grounded outer electrode. The plasma fabric is flexible and lightweight, and it can be scaled up for larger areas, making it attractive for wearable APP applications. Here, we report the various plasma properties of the WAPP device and successful test results showing the decontamination of toxic chemical warfare agents, namely, mustard (HD), soman (GD), and nerve (VX) agents. PMID:28098192

Wearable Atmospheric Pressure Plasma Fabrics Produced by Knitting Flexible Wire Electrodes for the Decontamination of Chemical Warfare Agents

NASA Astrophysics Data System (ADS)

Jung, Heesoo; Seo, Jin Ah; Choi, Seungki

2017-01-01

One of the key reasons for the limited use of atmospheric pressure plasma (APP) is its inability to treat non-flat, three-dimensional (3D) surface structures, such as electronic devices and the human body, because of the rigid electrode structure required. In this study, a new APP system design—wearable APP (WAPP)—that utilizes a knitting technique to assemble flexible co-axial wire electrodes into a large-area plasma fabric is presented. The WAPP device operates in ambient air with a fully enclosed power electrode and grounded outer electrode. The plasma fabric is flexible and lightweight, and it can be scaled up for larger areas, making it attractive for wearable APP applications. Here, we report the various plasma properties of the WAPP device and successful test results showing the decontamination of toxic chemical warfare agents, namely, mustard (HD), soman (GD), and nerve (VX) agents.

Wearable Atmospheric Pressure Plasma Fabrics Produced by Knitting Flexible Wire Electrodes for the Decontamination of Chemical Warfare Agents.

PubMed

Jung, Heesoo; Seo, Jin Ah; Choi, Seungki

2017-01-18

One of the key reasons for the limited use of atmospheric pressure plasma (APP) is its inability to treat non-flat, three-dimensional (3D) surface structures, such as electronic devices and the human body, because of the rigid electrode structure required. In this study, a new APP system design-wearable APP (WAPP)-that utilizes a knitting technique to assemble flexible co-axial wire electrodes into a large-area plasma fabric is presented. The WAPP device operates in ambient air with a fully enclosed power electrode and grounded outer electrode. The plasma fabric is flexible and lightweight, and it can be scaled up for larger areas, making it attractive for wearable APP applications. Here, we report the various plasma properties of the WAPP device and successful test results showing the decontamination of toxic chemical warfare agents, namely, mustard (HD), soman (GD), and nerve (VX) agents.

"Close-knit" defines a healthy Native American Indian family.

PubMed

Martin, Donna; Yurkovich, Eleanor

2014-02-01

In the United States, the most significant health disparities occur among members of the American Indian and Alaskan Native populations. Because their health beliefs, values, and cultural practices are learned within a family system, this study used a focused ethnography to explore American Indians' perceptions of a healthy family. Seventeen interviews were performed with 21 adults residing on a reservation on the Northern Plains of the United States. Participant observation was conducted during 100 hr of fieldwork. All informants identified a healthy family as being "close-knit," indicating that the major defining feature of these families is the degree of connectedness among members, immediate and extended. In this paper, we present adult tribal members' descriptions of a healthy family. It is evident that culturally appropriate programs, which consider American Indians' values/beliefs and build on community assets, are urgently needed to reduce health disparities.

Digital fabrication of textiles: an analysis of electrical networks in 3D knitted functional fabrics

NASA Astrophysics Data System (ADS)

Vallett, Richard; Knittel, Chelsea; Christe, Daniel; Castaneda, Nestor; Kara, Christina D.; Mazur, Krzysztof; Liu, Dani; Kontsos, Antonios; Kim, Youngmoo; Dion, Genevieve

2017-05-01

Digital fabrication methods are reshaping design and manufacturing processes through the adoption of pre-production visualization and analysis tools, which help minimize waste of materials and time. Despite the increasingly widespread use of digital fabrication techniques, comparatively few of these advances have benefited the design and fabrication of textiles. The development of functional fabrics such as knitted touch sensors, antennas, capacitors, and other electronic textiles could benefit from the same advances in electrical network modeling that revolutionized the design of integrated circuits. In this paper, the efficacy of using current state-of-the-art digital fabrication tools over the more common trialand- error methods currently used in textile design is demonstrated. Gaps are then identified in the current state-of-the-art tools that must be resolved to further develop and streamline the rapidly growing field of smart textiles and devices, bringing textile production into the realm of 21st century manufacturing.

Method of making a catalytic reactor for automobile

DOE Office of Scientific and Technical Information (OSTI.GOV)

Vroman, W.R.

1976-09-07

A catalytic reactor is made by providing a generally cylindrical catalytic substrate of oval transverse section and clamping the same between paired housing shells to form a housing of oval section spaced from the substrate by means of a pair of wire mesh ropes seated within a corresponding pair of grooves extending around the periphery of the substrate at axially spaced locations. Each rope is compacted from a matrix of multiple layers of resilient stainless steel knitted wire and is interlocked with the housing by means of a pair of inwardly opening channels of the housing spaced axially by anmore » inwardly projecting rib of the housing. The grooves in the substrate are pressed radially into the latter while the same is in a plastic uncured condition, thereby to compact and reinforce the grooves to withstand the localized compressional force of the ropes seated therein after the substrate is cured and hardened and clamped between the housing shells.« less

Hydrogen peroxide bleaching of cotton in ultrasonic energy.

PubMed

Mistik, S Ilker; Yükseloglu, S Müge

2005-12-01

It is well known that, conventional hydrogen peroxide bleaching process is an important and a specific step for wet processors; however it has some problems such as long time, high energy consumption. On the other hand, using ultrasonic energy in bleaching is an alternative method for the conventional processes. In this work, 100% cotton materials of different forms such as raw fibre, ring-spun yarns and knitted fabrics produced from these cottons, were treated with hydrogen peroxide in two different concentrations (5 mL/L and 10 mL/L), at three different temperatures (20 degrees C, 30 degrees C, 40 degrees C) and times (20 min, 30 min, 60 min). Whiteness Index of the samples were then measured spectrophotometrically and the overall results were compared.

Building C interior, looking north showing skylight and shared walls ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Building C interior, looking north showing skylight and shared walls of Germantown Dyeworks Building E to the east (right side of photograph) - Hinckley Knitting Mills, Building C, 21-35 East Wister Street, Philadelphia, Philadelphia County, PA

The Perils of Knitting New Life

ERIC Educational Resources Information Center

Lappe, Marc

1977-01-01

Reviews history of "recombinant DNA" research, including early experiments and origins of bioethical debates between concerned scientists. Discusses National Institutes of Health (NIH) guidelines and accompanying Environmental Impact statement regarding recombinant DNA research and possibilities of human error covered by neither…

75 FR 4415 - National Register of Historic Places; Notification of Pending Nominations and Related Actions

Federal Register 2010, 2011, 2012, 2013, 2014

2010-01-27

... comments should be submitted by Dated: February 11, 2010. J. Paul Loether, Chief, National Register of... Building, 125 Cherry St., Buffalo, 10000027 Montgomery County Chalmers Knitting Mills, 21-41 Bridge St...

China Report, Economic Affairs, No. 349

DTIC Science & Technology

1983-06-13

production techniques. The Zhengzhou Second State Cotton Mill used funds it raised itself to construct a new. polyester fibre warp knitting workshop...rubber, coconuts , areca nuts, sugarcane, and cassava, col- lectives’ and individuals* income derived from diversification throughout the county last

Knitting Up the Safety Net.

ERIC Educational Resources Information Center

Nebgen, Mary

1991-01-01

In Washoe County, Nevada, public and private social service organizations, the public schools, and the business community joined together in a partnership. The Children's Cabinet has proved to be an innovative and successful model for coordinating government services and community resources for children. (MLF)

JPRS Report China

DTIC Science & Technology

1990-02-21

in the case of the labor-intensive industries and trades such as art craft, embroidery , sewing and knitting, the opportunities offered are good for...Its agricultural production has the name of " embroidery agriculture." Because of the insufficient attention given agriculture during the past several

Silk-based anisotropical 3D biotextiles for bone regeneration.

PubMed

Ribeiro, Viviana P; Silva-Correia, Joana; Nascimento, Ana I; da Silva Morais, Alain; Marques, Alexandra P; Ribeiro, Ana S; Silva, Carla J; Bonifácio, Graça; Sousa, Rui A; Oliveira, Joaquim M; Oliveira, Ana L; Reis, Rui L

2017-04-01

Bone loss in the craniofacial complex can been treated using several conventional therapeutic strategies that face many obstacles and limitations. In this work, novel three-dimensional (3D) biotextile architectures were developed as a possible strategy for flat bone regeneration applications. As a fully automated processing route, this strategy as potential to be easily industrialized. Silk fibroin (SF) yarns were processed into weft-knitted fabrics spaced by a monofilament of polyethylene terephthalate (PET). A comparative study with a similar 3D structure made entirely of PET was established. Highly porous scaffolds with homogeneous pore distribution were observed using micro-computed tomography analysis. The wet state dynamic mechanical analysis revealed a storage modulus In the frequency range tested, the storage modulus values obtained for SF-PET scaffolds were higher than for the PET scaffolds. Human adipose-derived stem cells (hASCs) cultured on the SF-PET spacer structures showed the typical pattern for ALP activity under osteogenic culture conditions. Osteogenic differentiation of hASCs on SF-PET and PET constructs was also observed by extracellular matrix mineralization and expression of osteogenic-related markers (osteocalcin, osteopontin and collagen type I) after 28 days of osteogenic culture, in comparison to the control basal medium. The quantification of convergent macroscopic blood vessels toward the scaffolds by a chick chorioallantoic membrane assay, showed higher angiogenic response induced by the SF-PET textile scaffolds than PET structures and gelatin sponge controls. Subcutaneous implantation in CD-1 mice revealed tissue ingrowth's accompanied by blood vessels infiltration in both spacer constructs. The structural adaptability of textile structures combined to the structural similarities of the 3D knitted spacer fabrics to craniofacial bone tissue and achieved biological performance, make these scaffolds a possible solution for tissue engineering approaches in this area. Copyright © 2017 Elsevier Ltd. All rights reserved.

Training for Skill in Fault Diagnosis

ERIC Educational Resources Information Center

Turner, J. D.

1974-01-01

The Knitting, Lace and Net Industry Training Board has developed a training innovation called fault diagnosis training. The entire training process concentrates on teaching based on the experiences of troubleshooters or any other employees whose main tasks involve fault diagnosis and rectification. (Author/DS)

76 FR 66914 - Amendment of Limitation of Duty- and Quota-Free Imports of Apparel Articles Assembled in...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-10-28

... eligible fabrics, fabric components, or components knit-to-shape. Title VII of the Tax Relief and Health... Clothing (ATC), and the conversion factors for units of measure into square meter equivalents used by the...

Characterization of Silk/Poly 3-Hydroxybutyrate-chitosan-multi-walled Carbon Nanotube Micro-nano Scaffold: A New Hybrid Scaffold for Tissue Engineering Applications.

PubMed

Mirmusavi, Mohammad Hossein; Karbasi, Saeed; Semnani, Dariush; Kharazi, Anousheh Zargar

2018-01-01

Long-term healing tissue engineering scaffolds must hold its full mechanical strength at least for 12 weeks. Nano-micro scaffolds consist of electrospinning nanofibers and textile microfibers to support cell behavior and mechanical strength, respectively. The new nano-micro hybrid scaffold was fabricated by electrospinning poly 3-hydroxybutyrate-chitosan-multi-walled carbon nanotube (MWNT functionalized by COOH) solution on knitted silk in a random manner with different amounts of MWNT. The physical, mechanical, and biodegradation properties were assessed through scanning electron microscopy, Fourier-transform infrared (FTIR) spectroscopy, water contact angle test, tensile strength test, and weight loss test. The scaffold without MWNT was chosen as control sample. An increase in the amount of MWNT up to 1 wt% leads to better fiber diameter distribution, more hydrophilicity, biodegradation rate, and higher tensile strength in comparison with other samples. The porosity percentage of all scaffolds is more than 80%. According to FTIR spectra, the nanofibrous coat on knitted silk did not have any effect on silk fibroin crystallinity structures, and according to tensile strength test, the coat had a significant effect on tensile strength in comparison with pure knitted silk ( P ≤ 0.05). The average fiber diameter decreased due to an increase in electrical conductivity of the solution and fiber stretch in electrical field due to MWNTs. The scaffold containing 1 wt% MWNT was more hydrophilic due to the presence of many COOH groups of functionalized MWNT, thus an increase in the hydrolysis and degradation rate of this sample. High intrinsic tensile strength of MWNTs and improvement of nano-micro interface connection lead to an increase in tensile strength in scaffolds containing MWNT.

Characterization of Silk/Poly 3-Hydroxybutyrate-chitosan-multi-walled Carbon Nanotube Micro-nano Scaffold: A New Hybrid Scaffold for Tissue Engineering Applications

PubMed Central

Mirmusavi, Mohammad Hossein; Karbasi, Saeed; Semnani, Dariush; Kharazi, Anousheh Zargar

2018-01-01

Background: Long-term healing tissue engineering scaffolds must hold its full mechanical strength at least for 12 weeks. Nano-micro scaffolds consist of electrospinning nanofibers and textile microfibers to support cell behavior and mechanical strength, respectively. Methods: The new nano-micro hybrid scaffold was fabricated by electrospinning poly 3-hydroxybutyrate-chitosan-multi-walled carbon nanotube (MWNT functionalized by COOH) solution on knitted silk in a random manner with different amounts of MWNT. The physical, mechanical, and biodegradation properties were assessed through scanning electron microscopy, Fourier-transform infrared (FTIR) spectroscopy, water contact angle test, tensile strength test, and weight loss test. The scaffold without MWNT was chosen as control sample. Results: An increase in the amount of MWNT up to 1 wt% leads to better fiber diameter distribution, more hydrophilicity, biodegradation rate, and higher tensile strength in comparison with other samples. The porosity percentage of all scaffolds is more than 80%. According to FTIR spectra, the nanofibrous coat on knitted silk did not have any effect on silk fibroin crystallinity structures, and according to tensile strength test, the coat had a significant effect on tensile strength in comparison with pure knitted silk (P ≤ 0.05). The average fiber diameter decreased due to an increase in electrical conductivity of the solution and fiber stretch in electrical field due to MWNTs. The scaffold containing 1 wt% MWNT was more hydrophilic due to the presence of many COOH groups of functionalized MWNT, thus an increase in the hydrolysis and degradation rate of this sample. Conclusions: High intrinsic tensile strength of MWNTs and improvement of nano-micro interface connection lead to an increase in tensile strength in scaffolds containing MWNT. PMID:29535924

Land of Three Suns Artist Concept Animation

NASA Image and Video Library

2005-07-13

This frame from an artist animation shows the view from a hypothetical moon in orbit around the first known planet to reside in a tight-knit triple-star system. HD 188553 Ab is a gas giant planet, about 1.14 times the mass of Jupiter.

19 CFR 10.242 - Definitions.

Code of Federal Regulations, 2010 CFR

2010-04-01

... knitting machine. Several components with finished edges may be linked by yarn or thread as they are... reference to fabric components, means that all of the production processes, starting with the production of... fabric(s), means that all of the production processes, starting with polymers, fibers, filaments, textile...

19 CFR 10.242 - Definitions.

Code of Federal Regulations, 2011 CFR

2011-04-01

... knitting machine. Several components with finished edges may be linked by yarn or thread as they are... reference to fabric components, means that all of the production processes, starting with the production of... fabric(s), means that all of the production processes, starting with polymers, fibers, filaments, textile...

19 CFR 10.212 - Definitions.

Code of Federal Regulations, 2013 CFR

2013-04-01

... in” means that all of the components of the textile or apparel article (including thread, decorative...,” when used with reference to fabric(s), means that all of the production processes, starting with... with a fabric by a weaving, knitting, needling, tufting, felting, entangling or other process, took...

19 CFR 10.242 - Definitions.

Code of Federal Regulations, 2012 CFR

2012-04-01

... knitting machine. Several components with finished edges may be linked by yarn or thread as they are... reference to fabric components, means that all of the production processes, starting with the production of... fabric(s), means that all of the production processes, starting with polymers, fibers, filaments, textile...

19 CFR 10.212 - Definitions.

Code of Federal Regulations, 2010 CFR

2010-04-01

... in” means that all of the components of the textile or apparel article (including thread, decorative...,” when used with reference to fabric(s), means that all of the production processes, starting with... with a fabric by a weaving, knitting, needling, tufting, felting, entangling or other process, took...

19 CFR 10.212 - Definitions.

Code of Federal Regulations, 2011 CFR

2011-04-01

... in” means that all of the components of the textile or apparel article (including thread, decorative...,” when used with reference to fabric(s), means that all of the production processes, starting with... with a fabric by a weaving, knitting, needling, tufting, felting, entangling or other process, took...

19 CFR 10.242 - Definitions.

Code of Federal Regulations, 2014 CFR

2014-04-01

... knitting machine. Several components with finished edges may be linked by yarn or thread as they are... reference to fabric components, means that all of the production processes, starting with the production of... fabric(s), means that all of the production processes, starting with polymers, fibers, filaments, textile...

19 CFR 10.242 - Definitions.

Code of Federal Regulations, 2013 CFR

2013-04-01

... knitting machine. Several components with finished edges may be linked by yarn or thread as they are... reference to fabric components, means that all of the production processes, starting with the production of... fabric(s), means that all of the production processes, starting with polymers, fibers, filaments, textile...

19 CFR 10.212 - Definitions.

Code of Federal Regulations, 2012 CFR

2012-04-01

... in” means that all of the components of the textile or apparel article (including thread, decorative...,” when used with reference to fabric(s), means that all of the production processes, starting with... with a fabric by a weaving, knitting, needling, tufting, felting, entangling or other process, took...

19 CFR 10.212 - Definitions.

Code of Federal Regulations, 2014 CFR

2014-04-01

... in” means that all of the components of the textile or apparel article (including thread, decorative...,” when used with reference to fabric(s), means that all of the production processes, starting with... with a fabric by a weaving, knitting, needling, tufting, felting, entangling or other process, took...

40 CFR 410.54 - Pretreatment standards for existing sources (PSES).

Code of Federal Regulations, 2011 CFR

2011-07-01

... 40 Protection of Environment 29 2011-07-01 2009-07-01 true Pretreatment standards for existing sources (PSES). 410.54 Section 410.54 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS TEXTILE MILLS POINT SOURCE CATEGORY Knit Fabric Finishing Subcategory...

40 CFR 410.56 - Pretreatment standards for new sources (PSNS).

Code of Federal Regulations, 2011 CFR

2011-07-01

... 40 Protection of Environment 29 2011-07-01 2009-07-01 true Pretreatment standards for new sources (PSNS). 410.56 Section 410.56 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS TEXTILE MILLS POINT SOURCE CATEGORY Knit Fabric Finishing Subcategory...

Research as Art and Art as Research: A Living Relationship.

ERIC Educational Resources Information Center

Jeffers, Carol S.

1993-01-01

Explores the interrelationship of educational research to art. Recommends using art as a part of research methodology. Describes the use of a nineteenth-century painting, "The Knitting Lesson," as a metaphor for incorporating the use of research in preservice art education. (CFR)

40 CFR 410.54 - Pretreatment standards for existing sources (PSES).

Code of Federal Regulations, 2010 CFR

2010-07-01

... 40 Protection of Environment 28 2010-07-01 2010-07-01 true Pretreatment standards for existing sources (PSES). 410.54 Section 410.54 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS TEXTILE MILLS POINT SOURCE CATEGORY Knit Fabric Finishing Subcategory...

40 CFR 410.56 - Pretreatment standards for new sources (PSNS).

Code of Federal Regulations, 2010 CFR

2010-07-01

... 40 Protection of Environment 28 2010-07-01 2010-07-01 true Pretreatment standards for new sources (PSNS). 410.56 Section 410.56 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS TEXTILE MILLS POINT SOURCE CATEGORY Knit Fabric Finishing Subcategory...

7 CFR 2902.33 - Carpets.

Code of Federal Regulations, 2010 CFR

2010-01-01

... Carpets. (a) Definition. Floor coverings composed of woven, tufted, or knitted fiber and a backing system... manufacturers of these qualifying biobased products provide information for the BioPreferred Web site of qualifying biobased products about the intended uses of the product, information on whether or not the...

7 CFR 2902.33 - Carpets.

Code of Federal Regulations, 2011 CFR

2011-01-01

... Carpets. (a) Definition. Floor coverings composed of woven, tufted, or knitted fiber and a backing system... manufacturers of these qualifying biobased products provide information for the BioPreferred Web site of qualifying biobased products about the intended uses of the product, information on whether or not the...

Cryogenic line insulation made from prefabricated polyurethane shells

NASA Technical Reports Server (NTRS)

Lerma, G.

1975-01-01

Prefabricated polyurethane foam insulation is inexpensive and easily installed on cryogenic lines. Insulation sections are semicircular half shells. Pair of half shells is placed to surround cryogenic line. Cylindrically-shaped knit sock is pulled over insulation then covered with polyurethane resin to seal system.

High School Credit by Contract: Correspondence Study.

ERIC Educational Resources Information Center

Alaska State Dept. of Education, Juneau.

A series of fifteen correspondence studies for high school credit by contract are presented. Contracts are included for boating skills and seamanship; boatbuilding; food and food preparation; gardening; livestock raising; salmon aquaculture; sewing, knitting, and needlework; small engine repair; taxidermy and tanning; trapping; training animals;…

Stress adapted embroidered meshes with a graded pattern design for abdominal wall hernia repair

NASA Astrophysics Data System (ADS)

Hahn, J.; Bittrich, L.; Breier, A.; Spickenheuer, A.

2017-10-01

Abdominal wall hernias are one of the most relevant injuries of the digestive system with 25 million patients in 2013. Surgery is recommended primarily using allogenic non-absorbable wrap-knitted meshes. These meshes have in common that their stress-strain behaviour is not adapted to the anisotropic behaviour of native abdominal wall tissue. The ideal mesh should possess an adequate mechanical behaviour and a suitable porosity at the same time. An alternative fabrication method to wrap-knitting is the embroidery technology with a high flexibility in pattern design and adaption of mechanical properties. In this study, a pattern generator was created for pattern designs consisting of a base and a reinforcement pattern. The embroidered mesh structures demonstrated different structural and mechanical characteristics. Additionally, the investigation of the mechanical properties exhibited an anisotropic mechanical behaviour for the embroidered meshes. As a result, the investigated pattern generator and the embroidery technology allow the production of stress adapted mesh structures that are a promising approach for hernia reconstruction.

46 CFR 164.009-3 - Noncombustible materials not requiring specific approval.

Code of Federal Regulations, 2010 CFR

2010-10-01

... subpart: (a) Sheet glass, block glass, clay, ceramics, and uncoated fibers. (b) All metals, except... only sand, gravel, expanded vermiculite, expanded or vesicular slags, diatomaceous silica, perlite, or pumice. (d) Woven, knitted or needle punched glass fabric containing no additives other than lubricants...

40 CFR 410.55 - New source performance standards (NSPS).

Code of Federal Regulations, 2010 CFR

2010-07-01

... 40 Protection of Environment 28 2010-07-01 2010-07-01 true New source performance standards (NSPS). 410.55 Section 410.55 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS TEXTILE MILLS POINT SOURCE CATEGORY Knit Fabric Finishing Subcategory § 410.55 New...

Sticking to Their Knitting.

ERIC Educational Resources Information Center

Jacobs, Richard M.

1996-01-01

Discusses the participation of a Pennsylvania Catholic elementary school faculty in an inservice training program designed to improve the school's capacity to meet the needs of its students. Indicates that the program was intended to foster the faculty's Catholic identity as the primary means of addressing problems affecting its students. (MAB)

40 CFR 410.55 - New source performance standards (NSPS).

Code of Federal Regulations, 2011 CFR

2011-07-01

... 40 Protection of Environment 29 2011-07-01 2009-07-01 true New source performance standards (NSPS). 410.55 Section 410.55 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS TEXTILE MILLS POINT SOURCE CATEGORY Knit Fabric Finishing Subcategory § 410.55 New...

DIY Activists: Communities of Practice, Cultural Dialogism, and Radical Knowledge Sharing

ERIC Educational Resources Information Center

Hemphill, David; Leskowitz, Shari

2013-01-01

This study explored innovative alternative processes of living, learning, and knowledge sharing of a loosely knit community of anarchist, anticapitalist "Do-It-Yourself" (DIY) activists. Generated through participant observation and interviews, findings reinforced adult education theories--that adults can diagnose their own learning…

75 FR 30861 - Proposed Extension of the Approval of Information Collection Requirements

Federal Register 2010, 2011, 2012, 2013, 2014

2010-06-02

...., knitted outerwear, women's apparel, jewelry manufacturing, gloves and mittens, button and buckle... homeworkers in all restricted industries, except women's apparel and hazardous jewelry manufacturing [[Page... under the FLSA into a single OMB control number, 1235-0001. A list of the current control numbers...

Fabric strain sensor integrated with CNPECs for repeated large deformation

NASA Astrophysics Data System (ADS)

Yi, Weijing

Flexible and soft strain sensors that can be used in smart textiles for wearable applications are much desired. They should meet the requirements of low modulus, large working range and good fatigue resistance as well as good sensing performances. However, there were no commercial products available and the objective of the thesis is to investigate fabric strain sensors based on carbon nanoparticle (CNP) filled elastomer composites (CNPECs) for potential wearing applications. Conductive CNPECs were fabricated and investigated. The introduction of silicone oil (SO) significantly decreased modulus of the composites to less than 1 MPa without affecting their deformability and they showed good stability after heat treatment. With increase of CNP concentration, a percolation appeared in electrical resistivity and the composites can be divided into three ranges. I-V curves and impedance spectra together with electro-mechanical studies demonstrated a balance between sensitivity and working range for the composites with CNP concentrations in post percolation range, and were preferred for sensing applications only if the fatigue life was improved. Due to the good elasticity and failure resist property of knitted fabric under repeated extension, it was adopted as substrate to increase the fatigue life of the conductive composites. After optimization of processing parameters, the conductive fabric with CNP concentration of 9.0CNP showed linear I-V curves when voltage is in the range of -1 V/mm and 1 V/mm and negligible capacitive behavior when frequency below 103 Hz even with strain of 60%. It showed higher sensitivity due to the combination of nonlinear resistance-strain behavior of the CNPECs and non-even strain distribution of knitted fabric under extension. The fatigue life of the conductive fabric was greatly improved. Extended on the studies of CNPECs and the coated conductive fabrics, a fabric strain sensor was designed, fabricated and packaged. The Young's modulus of the packaged fabric strain sensor was less than 1 MPa; the strain gauge factor was 4.76 within the strain range of 0-40% and the hysteresis was 5.5%; the resistance relaxation was 5.56% with a constant strain of 40%; the fatigue life of the sensor was more than 100,000 cycles.

Knitting Local History Together: Collaborating To Construct Curriculum.

ERIC Educational Resources Information Center

Black, Mary S.; Blake, Marie E.

2001-01-01

Discusses a collaboration among an educator, a historical archaeologist, and a historian in order to create a local history curriculum that focuses on the life of African Americans on a Texas farm. Discusses how the curriculum was actually developed focusing on the role of the three team members. (CMK)

Felting as Expressive Art Form.

ERIC Educational Resources Information Center

Cirillo, Sandi

1998-01-01

Describes felting as the process of making felt using sheep's wool from fibers without weaving or knitting. Explains that teachers can incorporate felting into a lesson exploring the background behind this process, as an extension of collage or textile arts, as a means to studying abstract art, or in a fashion design unit. (CMK)

Where Are We?

ERIC Educational Resources Information Center

Waiveris, Charles; Craine, Timothy V.

1996-01-01

Discusses a simple procedure for determining our exact location on Earth based on the motion of celestial bodies and latitude and longitude. This hands-on activity requires students to design and construct an apparatus that will produce accurate measurements. The materials required are a knitting needle, a tape measure, and a sunny day. (AIM)

16 CFR 303.33 - Country where textile fiber products are processed or manufactured.

Code of Federal Regulations, 2011 CFR

2011-01-01

... “Scarf made in USA of fabric made in China” or “Comforter Filled, Sewn and Finished in the U.S. With Shell Made in China” or “Made in [Foreign Country]/fabric made in USA” or “Knit in USA, assembled in...

16 CFR 303.33 - Country where textile fiber products are processed or manufactured.

Code of Federal Regulations, 2010 CFR

2010-01-01

... “Scarf made in USA of fabric made in China” or “Comforter Filled, Sewn and Finished in the U.S. With Shell Made in China” or “Made in [Foreign Country]/fabric made in USA” or “Knit in USA, assembled in...

Building C west elevation showing south elevation of Building B ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Building C west elevation showing south elevation of Building B (on left) and north elevation of Building D (on right). The Germantown Dyeworks complex and smoke stack appear in the background. View looking east - Hinckley Knitting Mills, Building C, 21-35 East Wister Street, Philadelphia, Philadelphia County, PA

The hydroentanglement system of producing nonwoven fabrics of certain specific attributes and functionalities

USDA-ARS?s Scientific Manuscript database

Although the traditional technologies and processes of producing fabric structures, via yarn spinning, weaving, knitting, lacing, tufting, or the like, continue to be the ‘major league’ players in textile manufacturing today, the modern hydroentanglement system, commonly known as “spunlacing,” has a...

The Hub of a Wheel: A Neighborhood Support Network.

ERIC Educational Resources Information Center

Rosel, Natalie

1983-01-01

Describes a closely knit neighborhood network of mutual assistance that has developed among older residents, highlighting how the "old old" people help each other daily and how the assistance is taken for granted. Theoretical and practical implications for social integration and independent living are summarized. (Author/JAC)

Mapping Playgrids for Learning across Space, Time, and Scale

ERIC Educational Resources Information Center

Hollett, Ty; Kalir, Jeremiah H.

2017-01-01

In this article, we analyze the production of learner-generated playgrids. Playgrids are produced when learners knit together social media tools to participate across settings and scales, accomplish their goals, pursue interests, and make their learning more enjoyable and personally meaningful. Through case study methodology we examine how two…

Custom-shaping system for bone regeneration by seeding marrow stromal cells onto a web-like biodegradable hybrid sheet.

PubMed

Tsuchiya, Kohei; Mori, Taisuke; Chen, Guoping; Ushida, Takashi; Tateishi, Tetsuya; Matsuno, Takeo; Sakamoto, Michiie; Umezawa, Akihiro

2004-05-01

New bone for the repair or the restoration of the function of traumatized, damaged, or lost bone is a major clinical need, and bone tissue engineering has been heralded as an alternative strategy for regenerating bone. A novel web-like structured biodegradable hybrid sheet has been developed for bone tissue engineering by preparing knitted poly(DL-lactic-co-glycolic acid) sheets (PLGA sheets) with collagen microsponges in their openings. The PLGA skeleton facilitates the formation of the hybrid sheets into desired shapes, and the collagen microsponges in the pores of the PLGA sheet promote cell adhesion and uniform cell distribution throughout the sheet. A large number of osteoblasts established from marrow stroma adhere to the scaffolds and generate the desired-shaped bone in combination with these novel sheets. These results indicate that the web-like structured novel sheet shows promise for use as a tool for custom-shaped bone regeneration in basic research on osteogenesis and for the development of therapeutic applications. Copyright 2004 Springer-Verlag

Crystal structure of the ATP-gated P2X[subscript 4] ion channel in the closed state

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kawate, Toshimitsu; Michel, Jennifer Carlisle; Birdsong, William T.

2009-08-13

P2X receptors are cation-selective ion channels gated by extracellular ATP, and are implicated in diverse physiological processes, from synaptic transmission to inflammation to the sensing of taste and pain. Because P2X receptors are not related to other ion channel proteins of known structure, there is at present no molecular foundation for mechanisms of ligand-gating, allosteric modulation and ion permeation. Here we present crystal structures of the zebrafish P2X{sub 4} receptor in its closed, resting state. The chalice-shaped, trimeric receptor is knit together by subunit-subunit contacts implicated in ion channel gating and receptor assembly. Extracellular domains, rich in {beta}-strands, have largemore » acidic patches that may attract cations, through fenestrations, to vestibules near the ion channel. In the transmembrane pore, the 'gate' is defined by an {approx}8 {angstrom} slab of protein. We define the location of three non-canonical, intersubunit ATP-binding sites, and suggest that ATP binding promotes subunit rearrangement and ion channel opening.« less

African American Elders’ Serious Illness Experiences: Narratives of “God Did,” “God Will,” and “Life Is Better”

PubMed Central

Coats, Heather; Crist, Janice D.; Berger, Ann; Sternberg, Esther; Rosenfeld, Anne G.

2017-01-01

The foundation of culturally sensitive patient-centered palliative care is formed from one’s social, spiritual, psychological, and physical experiences of serious illness. The purpose of this study was to describe categories and patterns of psychological, social, and spiritual healing from the perspectives of aging seriously ill African American (AA) elders. Using narrative analysis methodology, 13 open-ended interviews were collected. Three main patterns were “prior experiences,” “I changed,” and “across past, present experiences and future expectations.” Themes were categorized within each pattern: been through it … made me strong, I thought about … others, went down little hills … got me down, I grew stronger, changed priorities, do things I never would have done, quit doing, God did and will take care of me, close-knit relationships, and life is better. “Faith” in God helped the aging seriously ill AA elders “overcome things,” whether their current illness or other life difficulties. PMID:26701962

Compression Testing of Textile Composite Materials

NASA Technical Reports Server (NTRS)

Masters, John E.

1996-01-01

The applicability of existing test methods, which were developed primarily for laminates made of unidirectional prepreg tape, to textile composites is an area of concern. The issue is whether the values measured for the 2-D and 3-D braided, woven, stitched, and knit materials are accurate representations of the true material response. This report provides a review of efforts to establish a compression test method for textile reinforced composite materials. Experimental data have been gathered from several sources and evaluated to assess the effectiveness of a variety of test methods. The effectiveness of the individual test methods to measure the material's modulus and strength is determined. Data are presented for 2-D triaxial braided, 3-D woven, and stitched graphite/epoxy material. However, the determination of a recommended test method and specimen dimensions is based, primarily, on experimental results obtained by the Boeing Defense and Space Group for 2-D triaxially braided materials. They evaluated seven test methods: NASA Short Block, Modified IITRI, Boeing Open Hole Compression, Zabora Compression, Boeing Compression after Impact, NASA ST-4, and a Sandwich Column Test.

Double gloving to reduce surgical cross-infection.

PubMed

Tanner, J; Parkinson, H

2006-07-19

The invasive nature of surgery, with its increased exposure to blood, means that during surgery there is a high risk of transfer of pathogens. Pathogens can be transferred through contact between surgical patients and the surgical team, resulting in post-operative or blood borne infections in patients or blood borne infections in the surgical team. Both patients and the surgical team need to be protected from this risk. This risk can be reduced by implementing protective barriers such as wearing surgical gloves. Wearing two pairs of surgical gloves, triple gloves, glove liners or cloth outer gloves, as opposed to one pair, is considered to provide an additional barrier and further reduce the risk of contamination. The primary objective of this review was to determine if additional glove protection reduces the number of surgical site or blood borne infections in patients or the surgical team. The secondary objective was to determine if additional glove protection reduces the number of perforations to the innermost pair of surgical gloves. The innermost gloves (next to skin) compared with the outermost gloves are considered to be the last barrier between the patient and the surgical team. We searched the Cochrane Wounds Group Specialised Register (January 2006), and the Cochrane Central Register of Controlled Trials (CENTRAL)(The Cochrane Library Issue 4, 2005). We also contacted glove manufacturing companies and professional organisations. Randomised controlled trials involving: single gloving, double gloving, triple gloving, glove liners, knitted outer gloves, steel weave outer gloves and perforation indicator systems. Both authors independently assessed the relevance and quality of each trial. Data was extracted by one author and cross checked for accuracy by the second author. Two trials were found which addressed the primary outcome, namely, surgical site infections in patients. Both trials reported no infections. Thirty one randomised controlled trials measuring glove perforations were identified and included in the review. Fourteen trials of double gloving (wearing two pairs of surgical latex gloves) were pooled and showed that there were significantly more perforations to the single glove than the innermost of the double gloves (OR 4.10, 95% CI 3.30 to 5.09). Eight trials of indicator gloves (coloured latex gloves worn underneath latex gloves to more rapidly alert the team to perforations) showed that significantly fewer perforations were detected with single gloves compared with indicator gloves (OR 0.10, 95% CI 0.06 to 0.16) or with standard double glove compared with indicator gloves (OR 0.08, 95% CI 0.04 to 0.17). Two trials of glove liners (a glove knitted with cloth or polymers worn between two pairs of latex gloves)(OR 26.36, 95% CI 7.91 to 87.82), three trials of knitted gloves (knitted glove worn on top of latex surgical gloves)(OR 5.76, 95% CI 3.25 to 10.20) and one trial of triple gloving (three pairs of latex surgical gloves)(OR 69.41, 95% CI 3.89 to 1239.18) all compared with standard double gloves, showed there were significantly more perforations to the innermost glove of a standard double glove in all comparisons. There is no direct evidence that additional glove protection worn by the surgical team reduces surgical site infections in patients, however the review has insufficient power for this outcome. The addition of a second pair of surgical gloves significantly reduces perforations to innermost gloves. Triple gloving, knitted outer gloves and glove liners also significantly reduce perforations to the innermost glove. Perforation indicator systems results in significantly more innermost glove perforations being detected during surgery.

Managing Sustainable Data Infrastructures: The Gestalt of EOSDIS

NASA Astrophysics Data System (ADS)

Behnke, J.; Lindsay, F. E.; Lowe, D. R.; Mitchell, A. E.; Lynnes, C.

2016-12-01

NASA's Earth Observing System Data and Information System (EOSDIS) has been a central component of the NASA Earth observation program since the 1990's. The data collected by NASA's remote sensing instruments represent a significant public investment in research. EOSDIS provides free and open access to this data to a worldwide public research community. From the very beginning, EOSDIS was conceived as a system built on partnerships between NASA Centers, US agencies and academia. EOSDIS manages a wide range of Earth science discipline data that include cryosphere, land cover change, polar processes, field campaigns, ocean surface, digital elevation, atmosphere dynamics and composition, and inter-disciplinary research, among many others. Over the years, EOSDIS has evolved to support increasingly complex and diverse NASA Earth Science data collections. EOSDIS epitomizes a System of Systems, whose many varied and distributed parts are integrated into a single, highly functional organized science data system. A distributed architecture was adopted to ensure discipline-specific support for the science data, while also leveraging standards and establishing policies and tools to enable interdisciplinary research, and analysis across multiple scientific instruments. The EOSDIS is composed of system elements such as geographically distributed archive centers used to manage the stewardship of data. The infrastructure consists of underlying capabilities/connections that enable the primary system elements to function together. For example, one key infrastructure component is the common metadata repository, which enables discovery of all data within the EOSDIS system. . EOSDIS employs processes and standards to ensure partners can work together effectively, and provide coherent services to users. While the separation into domain-specific science archives helps to manage the wide variety of missions and datasets, the common services and practices serve to knit the overall system together into a coherent whole, with sharing of data, metadata, information and software making EOSDIS more than the simple sum of its parts. This paper will describe those parts and how the whole system works together to deliver Earth science data to millions of users.

Bioinformatics in the Netherlands: the value of a nationwide community.

PubMed

van Gelder, Celia W G; Hooft, Rob W W; van Rijswijk, Merlijn N; van den Berg, Linda; Kok, Ruben G; Reinders, Marcel; Mons, Barend; Heringa, Jaap

2017-09-15

This review provides a historical overview of the inception and development of bioinformatics research in the Netherlands. Rooted in theoretical biology by foundational figures such as Paulien Hogeweg (at Utrecht University since the 1970s), the developments leading to organizational structures supporting a relatively large Dutch bioinformatics community will be reviewed. We will show that the most valuable resource that we have built over these years is the close-knit national expert community that is well engaged in basic and translational life science research programmes. The Dutch bioinformatics community is accustomed to facing the ever-changing landscape of data challenges and working towards solutions together. In addition, this community is the stable factor on the road towards sustainability, especially in times where existing funding models are challenged and change rapidly. © The Author 2017. Published by Oxford University Press.

Auxetic textiles.

PubMed

Rant, Darja; Rijavec, Tatjana; Pavko-Čuden, Alenka

2013-01-01

Common materials have Poisson's ratio values ranging from 0.0 to 0.5. Auxetic materials exhibit negative Poisson's ratio. They expand laterally when stretched longitudinally and contract laterally when compressed. In recent years the use of textile technology to fabricate auxetic materials has attracted more and more attention. It is reflected in the extent of available research work exploring the auxetic potential of various textile structures and subsequent increase in the number of research papers published. Generally there are two approaches to producing auxetic textiles. The first one includes the use of auxetic fibers to produce an auxetic textile structure, whereas the other utilizes conventional fibres to produce a textile structure with auxetic properties. This review deals with auxetic materials in general and in the specific context of auxetic polymers, auxetic fibers, and auxetic textile structures made from conventional fibers and knitted structures with auxetic potential.

Machine vision inspection of lace using a neural network

NASA Astrophysics Data System (ADS)

Sanby, Christopher; Norton-Wayne, Leonard

1995-03-01

Lace is particularly difficult to inspect using machine vision since it comprises a fine and complex pattern of threads which must be verified, on line and in real time. Small distortions in the pattern are unavoidable. This paper describes instrumentation for inspecting lace actually on the knitting machine. A CCD linescan camera synchronized to machine motions grabs an image of the lace. Differences between this lace image and a perfect prototype image are detected by comparison methods, thresholding techniques, and finally, a neural network (to distinguish real defects from false alarms). Though produced originally in a laboratory on SUN Sparc work-stations, the processing has subsequently been implemented on a 50 Mhz 486 PC-look-alike. Successful operation has been demonstrated in a factory, but over a restricted width. Full width coverage awaits provision of faster processing.

Equity from a Large City Director's Perspective. Research and Development Series No. 214P.

ERIC Educational Resources Information Center

Campbell-Thrane, Lucille

Equity in vocational education cannot be addressed until the question of urban cultural pluralism has been fully analyzed. This question involves problems of minorities, the disadvantaged, and those with limited English proficiency. Barriers facing urban youths enrolling in vocational education include close-knit ethnic pockets attempting to…

Provincialising the World Culture Theory Debate: Critical Insights from a Margin

ERIC Educational Resources Information Center

Takayama, Keita

2015-01-01

Neo-institutionalist theory of global "isomorphism", or so-called World Culture Theory (WCT), has been much debated in comparative education. One notable feature of the debate is that the vast majority of its participants belong to a handful of closely knit comparative education communities. Ironically enough then, a debate that…

Exploring Nonfiction

ERIC Educational Resources Information Center

Wyatt, Neal

2007-01-01

Readers often think of nonfiction as an information experience and not as a story experience, and indeed many nonfiction titles are task oriented, teaching readers how to knit or outlining the process of building a fence. But there is a huge body of nonfiction that is both informative and story-based. New nonfiction classics like Jon Krakauer's…

19 CFR 10.248 - Additional requirements for preferential treatment of brassieres.

Code of Federal Regulations, 2010 CFR

2010-04-01

... the port of exportation; (C) In the case of fabric components purchased by the producer or entity... expenses for cutting or other processing to create the fabric components other than knitting to shape, that... shape, that the producer or entity controlling production can verify; or (2) If no exportation to an...

19 CFR 10.228 - Additional requirements for preferential treatment of brassieres.

Code of Federal Regulations, 2010 CFR

2010-04-01

... the port of exportation; (C) In the case of fabric components purchased by the producer or entity... expenses for cutting or other processing to create the fabric components other than knitting to shape, that... shape, that the producer or entity controlling production can verify; or (2) If no exportation to a...

19 CFR 10.228 - Additional requirements for preferential treatment of brassieres.

Code of Federal Regulations, 2011 CFR

2011-04-01

... the port of exportation; (C) In the case of fabric components purchased by the producer or entity... expenses for cutting or other processing to create the fabric components other than knitting to shape, that... shape, that the producer or entity controlling production can verify; or (2) If no exportation to a...

19 CFR 10.248 - Additional requirements for preferential treatment of brassieres.

Code of Federal Regulations, 2011 CFR

2011-04-01

... the port of exportation; (C) In the case of fabric components purchased by the producer or entity... expenses for cutting or other processing to create the fabric components other than knitting to shape, that... shape, that the producer or entity controlling production can verify; or (2) If no exportation to an...

19 CFR 10.843 - Articles eligible for duty-free treatment.

Code of Federal Regulations, 2010 CFR

2010-04-01

... paragraphs (a) through (j) of this section that are imported directly from Haiti or the Dominican Republic...-shape, and yarns, subject to the applicable quantitative limits set forth in U.S. Note 6(g), Subchapter...-shape, and yarns, without regard to the source of the fabric, fabric components, components knit-to...

19 CFR 10.843 - Articles eligible for duty-free treatment.

Code of Federal Regulations, 2011 CFR

2011-04-01

... paragraphs (a) through (j) of this section that are imported directly from Haiti or the Dominican Republic...-shape, and yarns, subject to the applicable quantitative limits set forth in U.S. Note 6(g), Subchapter...-shape, and yarns, without regard to the source of the fabric, fabric components, components knit-to...

4-H Textile Science Textile Arts Projects.

ERIC Educational Resources Information Center

Scholl, Jan

This packet contains three 4-H textile arts projects for students in the textile sciences area. The projects cover weaving, knitting, and crocheting. Each project provides an overview of what the student will learn, what materials are needed, and suggested projects for the area. Projects can be adapted for beginning, intermediate, or advanced…

Early Childhood Curriculum and the Definition of Knowledge.

ERIC Educational Resources Information Center

Spodek, Bernard

This paper delineates conceptions of early childhood programs from the 18th through the 20th centuries, and reveals how the programs changed as the concept of what constitutes knowledge changed. Discussion begins with reading instruction and hornbooks in Colonial America, and national language learning in the knitting school of Jean Frederick…

The 2015 Enterprise Application Market in Higher Education: Customer Relationship Management Systems

ERIC Educational Resources Information Center

Lang, Leah; Pirani, Judith A.

2016-01-01

Institutions face both challenges and opportunities in communicating with external constituent groups, from marketing new programs to attracting visitors and soliciting alumni. A college or university's tight-knit community of students, alums, and friends adds a special dimension to the higher education experience; bonds formed in college often…

"SDI--Where are We? The Challenge of the Future." The Information Dissemination Center View.

ERIC Educational Resources Information Center

Carmon, James L.

The historical and current status of information dissemination centers and the problem of user interface are reviewed. During the past decade, the problems of technical data processing have been conquered; information dissemination has evolved from a loosely knit group of experimental centers to an organization of established centers, many…

Puppet Resource Handbook for Teachers.

ERIC Educational Resources Information Center

Vogelsang, Robert; And Others

Designed as a teacher and therapist training tool, this booklet demonstrates how to make several types or kinds of puppets, and how to use them in a variety of classroom situations. The first section includes instructions for the following hand puppets: simple cloth, paper mache, knitted finger, paper bag, and Muppet types. The second section…

BJORN HAAVARD WIIK: The man and his accelerator projects

NASA Astrophysics Data System (ADS)

Johnsen, Kjell

2001-04-01

Björn Haavard Wiik died in an accident on 26th February, 1999. The high-energy community lost an outstanding scientist, DESY lost a highly appreciated and widely respected director, a closely knit family lost a husband, a father and a son and many of us lost an extraordinary friend...

An efficient process for producing economical and eco-friendly cotton textile composites for mobile industry

USDA-ARS?s Scientific Manuscript database

The mobile industry comprised of airplanes, automotives, and ships uses enormous quantities of various types of textiles. Just a few decades ago, most of these textile products and composites were made with woven or knitted fabrics that were mostly made with the then only available natural fibers, i...

The Workplace Literacy System Project (WLS). Final Performance Report.

ERIC Educational Resources Information Center

Poulton, Bruce R.

The Workplace Literacy System Project (WLS) prepared interactive CD-ROM discs containing about 50 hours of instruction and drill in basic skills presented within the context of the textile/apparel manufacturing industry. The project was conducted at a Sara Lee knit products plant in North Carolina. During the project, literacy task analyses were…

The Orbit of Water Droplets around Charged Rod

ERIC Educational Resources Information Center

Ferstl, Andrew; Burns, Andrew

2013-01-01

The motion of charges around a centrally charged object is often compared to gravitational orbits (such as satellites around planets). Recently, a video taken by astronaut Don Pettit onboard the International Space Station shows water droplets orbiting a charged knitting needle. Here we attempt to model this motion and estimate the charges on the…

Further Investigations of High Temperature Knitted Spring Tubes for Advanced Control Surface Seal Applications

NASA Technical Reports Server (NTRS)

Taylor, Shawn C.; DeMange, Jeffrey J.; Dunlap, Patrick H., Jr.; Steinetz, Bruce M.

2006-01-01

Knitted metallic spring tubes are the structural backbones that provide resiliency in control surface seals for use on current and future reusable space launch vehicles. Control surface seals fill the space between movable control surfaces such as body flaps, rudders and elevons, and the static body structures to which they are attached. These seals must remain in continuous contact with opposing surfaces to prevent the ingestion of damaging hot gases encountered during atmospheric re-entry. The Inconel X-750 (Special Metals Corporation) spring tube utilized in the baseline control surface seal shows significant resiliency loss when compressed at temperatures as low as 1200 F. High temperature compression testing and microstructural analysis show that creep is the dominant deformation mechanism leading to permanent set and resiliency loss in tested spring tube samples. Additional evaluation using a structured design of experiments approach shows that spring tube performance, primarily high temperature resiliency, can be enhanced through material substitution of Rene 41 (Allvac) alloy (for the baseline Inconel X-750 material) when coupled with specialized thermal processing.

3D Printed Structures Filled with Carbon Fibers and Functionalized with Mesenchymal Stem Cell Conditioned Media as In Vitro Cell Niches for Promoting Chondrogenesis.

PubMed

García-Ruíz, Josefa Predestinación; Díaz Lantada, Andrés

2017-12-24

In this study, we present a novel approach towards the straightforward, rapid, and low-cost development of biomimetic composite scaffolds for tissue engineering strategies. The system is based on the additive manufacture of a computer-designed lattice structure or framework, into which carbon fibers are subsequently knitted or incorporated. The 3D-printed lattice structure acts as support and the knitted carbon fibers perform as driving elements for promoting cell colonization of the three-dimensional construct. A human mesenchymal stem cell (h-MSC) conditioned medium (CM) is also used for improving the scaffold's response and promoting cell adhesion, proliferation, and viability. Cell culture results-in which scaffolds become buried in collagen type II-provide relevant information regarding the viability of the composite scaffolds used and the prospective applications of the proposed approach. In fact, the advanced composite scaffold developed, together with the conditioned medium functionalization, constitutes a biomimetic stem cell niche with clear potential, not just for tendon and ligament repair, but also for cartilage and endochondral bone formation and regeneration strategies.

Factors of persistence among graduates of athletic training education programs.

PubMed

Bowman, Thomas G; Dodge, Thomas M

2011-01-01

Previous researchers have indicated that athletic training education programs (ATEPs) appear to retain students who are motivated and well integrated into their education programs. However, no researchers have examined the factors leading to successful persistence to graduation of recent graduates from ATEPs. To determine the factors that led students enrolled in a postprofessional education program accredited by the National Athletic Trainers' Association (NATA) to persist to graduation from accredited undergraduate ATEPs. Qualitative study. Postprofessional education program accredited by the NATA. Fourteen graduates (12 women, 2 men) of accredited undergraduate entry-level ATEPs who were enrolled in an NATA-accredited postprofessional education program volunteered to participate. We conducted semistructured interviews and analyzed data through a grounded theory approach. We used open, axial, and selective coding procedures. To ensure trustworthiness, 2 independent coders analyzed the data. The researchers then negotiated over the coding categories until they reached 100% agreement. We also performed member checks and peer debriefing. Four themes emerged from the data. Decisions to persist to graduation from ATEPs appeared to be influenced by students' positive interactions with faculty, clinical instructors, and peers. The environment of the ATEPs also affected their persistence. Participants thought they learned much in both the clinic and the classroom, and this learning motivated them to persist. Finally, participants could see themselves practicing athletic training as a career, and this greatly influenced their eventual persistence. Our study gives athletic training educators insight into the reasons students persist to graduation from ATEPs. Specifically, athletic training programs should strive to develop close-knit learning communities that stress positive interactions between students and instructors. Athletic training educators also must work to present the athletic training field as exciting and dynamic.

Development of test methods for textile composites

NASA Technical Reports Server (NTRS)

Masters, John E.; Ifju, Peter G.; Fedro, Mark J.

1993-01-01

NASA's Advanced Composite Technology (ACT) Program was initiated in 1990 with the purpose of developing less costly composite aircraft structures. A number of innovative materials and processes were evaluated as a part of this effort. Chief among them are composite materials reinforced with textile preforms. These new forms of composite materials bring with them potential testing problems. Methods currently in practice were developed over the years for composite materials made from prepreg tape or simple 2-D woven fabrics. A wide variety of 2-D and 3-D braided, woven, stitched, and knit preforms were suggested for application in the ACT program. The applicability of existing test methods to the wide range of emerging materials bears investigation. The overriding concern is that the values measured are accurate representations of the true material response. The ultimate objective of this work is to establish a set of test methods to evaluate the textile composites developed for the ACT Program.

Entrepreneurs: Women and Minorities.

ERIC Educational Resources Information Center

Akers, Lilialyce

A program was designed to meet the needs of Kentucky women who wished to supplement their incomes by producing articles in their homes for sale. Its three-phase objective was to identify women who already had knitting skills and train them to produce a finished product; to provide basic knowledge about how to run a small business; and to provide…

16 CFR 1609.1 - Text of the Flammable Fabrics Act of 1953, as amended in 1954.

Code of Federal Regulations, 2014 CFR

2014-01-01

... be worn by individuals except hats, gloves, and footwear: Provided, however, That such hats do not... form an integral part of another garment: And provided further, That such footwear does not consist of...) The term fabric means any material (other than fiber, filament, or yarn) woven, knitted, felted, or...

16 CFR 1609.1 - Text of the Flammable Fabrics Act of 1953, as amended in 1954.

Code of Federal Regulations, 2012 CFR

2012-01-01

... be worn by individuals except hats, gloves, and footwear: Provided, however, That such hats do not... form an integral part of another garment: And provided further, That such footwear does not consist of...) The term fabric means any material (other than fiber, filament, or yarn) woven, knitted, felted, or...

The Triad Research University or a Post 20th Century Research University Model

ERIC Educational Resources Information Center

Tadmor, Zehev

2006-01-01

In this paper, a model for the future research university is proposed, which answers some of the key challenges facing universities. It consists of three independent yet closely knitted entities: a research institute, a university teaching college and a business unit creating a "triad" structure. The possible inevitability, the advantages and…

75 FR 6169 - Request for Public Comment on a Commercial Availability Request Under the U.S.-Singapore Free...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-02-08

... centimeters (52 inches). Finish: (Piece) dyed. Fabric 2 HTS Subheading: 6004.10.00. Fiber Content: 35% rayon...). Finish: (Piece) dyed. Fabric 3 HTS Subheading: 6001.22.00. Fiber Content: 79% rayon made from bamboo/15...: (Piece) dyed. (2) Certain knit fabrics of polyester fiber, of the specifications detailed below...

Otto Salomon in Nääs and His First Icelandic Students in Nordic Sloyd

ERIC Educational Resources Information Center

Thorsteinsson, Gisli; Ólafsson, Brynjar

2014-01-01

Pedagogically aimed craft education was established around the same time as the school-based system of formative education, under the term Sloyd. This refers to a pedagogical system of manual training that promotes general child development, through the acquisition of the technical skills employed in woodwork, metalwork, sewing, knitting and the…

Making a Difference in the Classroom: Strategies that Connect with Students

ERIC Educational Resources Information Center

Balli, Sandra J.

2009-01-01

This book is about the energy, substance, hope, and determination that excellent teachers bring to the rhythm of classrooms every day, year in and year out. Balli offers experiences and important lessons about teaching and classroom life at all grade levels, illuminating the perspective of both teachers and students. Knitting teacher and student…

Employers' Guide to Grants Scheme, 1969/70.

ERIC Educational Resources Information Center

Knitting, Lace, and Net Industry Training Board, Nottingham (England).

This booklet gives details, approved by the British Secretary of State for Employment and Productivity, of grants which will be paid by the Knitting, Lace, and Net Industry Board for training and further education during the training year, 1 August 1969-31 July 1970. Two categories are stressed: (1) day, block, release, and full time courses and…

What Is It "To Lead?": A Nuanced Exploration of Leadership by 3M National Student Fellows

ERIC Educational Resources Information Center

Bajer-Koulack, Ameena; Csorba, Emerson Thomas; Lee, Kyuwon Rosa; Smrke, Brianna; Smyth, Tristan

2014-01-01

In Canadian higher education, students from across the world interact within tight-knit communities, sharing ideas and developing a wealth of soft and disciplinary skills. With many universities playing host to dozens if not hundreds of student groups, the word "leadership" is uttered by students and faculty in hallways, gymnasiums,…

Knitted Patterns or Contagious Hotspots?: Linking Views on Knowledge and Organizational Networked Learning

ERIC Educational Resources Information Center

Cornelissen, Frank; de Jong, Tjip; Kessels, Joseph

2012-01-01

Purpose: This paper aims to propose a framework which connects perspectives on knowledge and learning to various approaches of social networks studies. The purpose is twofold: providing input for the discourse in organizational studies about the way different views on knowledge and networks drive design choices and activities of researchers,…

19 CFR 10.779 - Goods eligible for tariff preference claims.

Code of Federal Regulations, 2010 CFR

2010-04-01

...; DEPARTMENT OF THE TREASURY ARTICLES CONDITIONALLY FREE, SUBJECT TO A REDUCED RATE, ETC. United States-Morocco... goods provided for in Chapters 51, 52, 54, 55, 58, and 60 of the HTSUS that are wholly formed in Morocco... that are cut or knit to shape, or both, and sewn or otherwise assembled in Morocco, regardless of the...

An Epistemic Frame Analysis of Neoliberal Culture and Politics in the US, UK, and the UAE

ERIC Educational Resources Information Center

Mullen, Carol A.; Samier, Eugenie A.; Brindley, Sue; English, Fenwick W.; Carr, Nora K.

2013-01-01

Neoliberalism is a loosely knit bricolage from economics, politics, and various forms of reactionary populism that can be envisioned as a kind of epistemic frame in which largely counterrevolutionary forces engage in the "creative destruction" of institutional frameworks and powers, forging divisions across society that include labor and…

The Shift in Generational Leadership

ERIC Educational Resources Information Center

Goings, Amy Morrison

2016-01-01

Amy Morrison Goings was 40 years old in 2013 when she began her presidency at Lake Washington Institute of Technology. She didn't consider herself a representative of all Generation X community college presidents, but as a member of this tight-knit group, she does feel a need to share her insight into what's on the minds of that community.…

19 CFR 10.882 - Goods eligible for tariff preference claims.

Code of Federal Regulations, 2012 CFR

2012-04-01

...; DEPARTMENT OF THE TREASURY ARTICLES CONDITIONALLY FREE, SUBJECT TO A REDUCED RATE, ETC. United States-Oman... knit to shape, or both, and sewn or otherwise assembled in the territory of Oman from fabric or yarn produced or obtained outside the territory of Oman or the United States are eligible for a TPL claim filed...

19 CFR 10.882 - Goods eligible for tariff preference claims.

Code of Federal Regulations, 2014 CFR

2014-04-01

...; DEPARTMENT OF THE TREASURY ARTICLES CONDITIONALLY FREE, SUBJECT TO A REDUCED RATE, ETC. United States-Oman... knit to shape, or both, and sewn or otherwise assembled in the territory of Oman from fabric or yarn produced or obtained outside the territory of Oman or the United States are eligible for a TPL claim filed...

19 CFR 10.882 - Goods eligible for tariff preference claims.

Code of Federal Regulations, 2011 CFR

2011-04-01

...; DEPARTMENT OF THE TREASURY ARTICLES CONDITIONALLY FREE, SUBJECT TO A REDUCED RATE, ETC. United States-Oman... knit to shape, or both, and sewn or otherwise assembled in the territory of Oman from fabric or yarn produced or obtained outside the territory of Oman or the United States are eligible for a TPL claim filed...

19 CFR 10.882 - Goods eligible for tariff preference claims.

Code of Federal Regulations, 2013 CFR

2013-04-01

...; DEPARTMENT OF THE TREASURY ARTICLES CONDITIONALLY FREE, SUBJECT TO A REDUCED RATE, ETC. United States-Oman... knit to shape, or both, and sewn or otherwise assembled in the territory of Oman from fabric or yarn produced or obtained outside the territory of Oman or the United States are eligible for a TPL claim filed...

76 FR 54691 - Rules of Origin for Imported Merchandise

Federal Register 2010, 2011, 2012, 2013, 2014

2011-09-02

... where the good is knit to shape in accordance with 19 U.S.C. 3592(b)(2)(A)(ii). Comment Period The July... Cust. Ct. 499, C.D. 4026, 313 F. Supp. 951 (1970), appeal dismissed, 57 CCP 141 (1970), and that the... change in origin) results for purposes of the country of marking statute (19 U.S.C. 1304) from the...

Knitting-Machine Fixer, Socks (hosiery) 689.280 -- Technical Report on Development of the USTES Aptitude Test Battery.

ERIC Educational Resources Information Center

Manpower Administration (DOL), Washington, DC. U.S. Training and Employment Service.

The United States Training and Employment Service General Aptitude Test Battery (GATB), first published in 1947, has been included in a continuing program of research to validate the tests against success in many different occupations. The GATB consists of 12 tests which measure nine aptitudes: General Learning Ability; Verbal Aptitude; Numerical…

Situational Awareness -- Evolving Knowledge into Understanding: A Competency Critical to US National Interest

DTIC Science & Technology

2009-05-01

implications and practical consequences Communicates effectively with others in determining solutions to complex problems.” 20...and communicating • it becomes possible for certain skills to be performed while doing something else; for example, knitting while watching...has been employed extensively in the aeronautical, space and intelligence communities . Yet there is no single mutually acceptable definition of SA

Rural Students in Washington State: STEM as a Strategy for Building Rigor, Postsecondary Aspirations, and Relevant Career Opportunities

ERIC Educational Resources Information Center

Peterson, Barbara; Bornemann, Greta; Lydon, Cheryl; West, Kimberly

2015-01-01

In rural settings, leaving for college can mean a young person's first step in leaving home forever (Sherman & Sage, 2011). That presents a serious challenge for college recruiters as they ask parents from Indian reservations or close-knit Hispanic or rural farming communities to allow their children to consider postsecondary opportunities. In…

Weak Ties and Self-Regulation in Job Search: The Effects of Goal Orientation on Networking

ERIC Educational Resources Information Center

Hatala, John-Paul; Yamkovenko, Bogdan

2016-01-01

The purpose of this study is to empirically investigate the relationship between the self-regulatory variable of goal orientation and the extent to which job seekers reach out to and use weak ties in their job search. Weak ties, as defined by Granovettor, are connections to densely knit networks outside the individual's direct contacts who could…

A strategic plan for forest research and development in the south

Treesearch

Richard A. Harper; Cassandra Johnson; H. Michael Rauscher; Carol Whitlock

2007-01-01

In many ways, the southern region of the United States is our nation's best kept secret. Although each is unique, the 13 southern States from Virginia to Texas share several important attributes: long growing seasons and plentiful water, close-knit communities with strong ties to the land, terrains ranging from lush wetlands to rolling hills to sheltering...

[The physical and psychological rehabilitation of women who have had a myocardial infarct].

PubMed

Aronov, D M; Karadzhaeva, O A

1992-01-01

The study was performed of the effect of bicycle exercise and occupational therapy (embroidery, knitting, sewing, drawing, etc.) on physical and psychological status of postmyocardial infarction females at the in-hospital stage of rehabilitation. It was found that occupational therapy improved the psychological status and life quality, whereas low-intensity physical training increased performance status in relevant women.

Comparison of resin film infusion, resin transfer molding, and consolidation of textile preforms for primary aircraft structure

NASA Technical Reports Server (NTRS)

Suarez, J.; Dastin, S.

1992-01-01

Innovative design concepts and cost effective fabrication processes were developed for damage tolerant primary structures that can perform at a design ultimate strain level of 6000 micro inch/inch. Attention focused on the use of textile high performance fiber reinforcement concepts that provide improved damage tolerance and out-of-plane load capability, low cost resin film infusion (RFI) and resin transfer molding (RTM) processes, and thermoplastic forming concepts. The fabrication of wing 'Y' spars by four different materials and/or processes methods is described: fabricated using IM7 angle interlock 0 to 90 deg woven preforms with + or - 45 deg plies stitched with Toray high strength graphite thread and processed using RFI and 3501-6 epoxy; fabricated using G40-800 knitted/stitched preforms and processed using RFI and 3501-6 epoxy; fabricated using G40-800 knitted/stitched preforms using RTM and Tactix 123/H41 epoxy; and fabricated preforms using AS4(6K)/PEEK 150 g commingled angle interlock 0 to 90 deg woven preforms with + or - 45 deg commingled plies stitched using high strength graphite thread and processed by consolidation. Structural efficiency, processability, and acquisition cost are compared.

Design for Health and Well Being: Knitted Products for Diabetics

NASA Astrophysics Data System (ADS)

Gault, A.

2016-07-01

This paper will discuss the design development, manufacturing and testing of knitted products maximizing the use of new innovations in Nano- technology and the integration of Phase Changing Materials specifically for diabetics. The project identified key aspects requiring design solutions to bring improvement to the circulatory problems with specific reference to the diabetic condition. Diabetics have particular difficulty in regulating their body temperature and this can result in the condition worsening, and resulting in loss of digits or limbs. The design of products to prevent the deterioration of the diabetic condition and to help those with limb loss was developed in collaboration with a Northern Ireland diabetic consultant, a product engineer and a knitwear designer. The fusion of ideas between the stakeholders resulted in the development and manufacture of a range of products that have been successfully tested at the yarn and fabric development stage and have been proven to maintain body temperature by either cooling or warming and therefore bring improvement to health and well-being. Whilst the product has a performance element the design ideas created desirable products that not only provided solutions to the brief but also resulted in products that had further market applications.

An infiltration/cure model for manufacture of fabric composites by the resin infusion process

NASA Technical Reports Server (NTRS)

Weideman, Mark H.; Loos, Alfred C.; Dexter, H. Benson; Hasko, Gregory H.

1992-01-01

A 1-D infiltration/cure model was developed to simulate fabrication of advanced textile composites by the resin film infusion process. The simulation model relates the applied temperature and pressure processing cycles, along with the experimentally measured compaction and permeability characteristics of the fabric preforms, to the temperature distribution, the resin degree of cure and viscosity, and the infiltration flow front position as a function of time. The model also predicts the final panel thickness, fiber volume fraction, and resin mass for full saturation as a function of compaction pressure. Composite panels were fabricated using the RTM (Resin Transfer Molding) film infusion technique from knitted, knitted/stitched, and 2-D woven carbon preforms and Hercules 3501-6 resin. Fabric composites were fabricated at different compaction pressures and temperature cycles to determine the effects of the processing on the properties. The composites were C-scanned and micrographed to determine the quality of each panel. Advanced cure cycles, developed from the RTM simulation model, were used to reduce the total cure cycle times by a factor of 3 and the total infiltration times by a factor of 2.

Morphology and spelling in French students with dyslexia: the case of silent final letters.

PubMed

Quémart, Pauline; Casalis, Séverine

2017-04-01

Spelling is a challenge for individuals with dyslexia. Phoneme-to-grapheme correspondence rules are highly inconsistent in French, which make them very difficult to master, in particular for dyslexics. One recurrent manifestation of this inconsistency is the presence of silent letters at the end of words. Many of these silent letters perform a morphological function. The current study examined whether students with dyslexia (aged between 10 and 15 years) benefit from the morphological status of silent final letters when spelling. We compared, their ability to spell words with silent final letters that are either morphologically justified (e.g., tricot, "knit," where the final "t" is pronounced in morphologically related words such as tricoter, "to knit" and tricoteur "knitter") or not morphologically justified (e.g., effort, "effort") to that of a group of younger children matched for reading and spelling level. Results indicated that the dyslexic students' spelling of silent final letters was impaired in comparison to the control group. Interestingly, morphological status helped the dyslexics improve the accuracy of their choice of final letters, contrary to the control group. This finding provides new evidence of morphological processing in dyslexia during spelling.

Finger materials for air cushion vehicles. Volume 1: Flexible coatings for finger materials

NASA Astrophysics Data System (ADS)

Conn, P. K.; Snell, I. C.; Klemens, W.

1984-12-01

Twenty polymer formulations from ten selected gum rubber polymers or polymer blends and fourteen formulations of castable liquid polyurethane polymers were characterized as coatings for the coated fabric that is the type material used to make flexible fingers for air cushion vehicles. The formulations were screened for crack growth and flexural fatigue resistance; the results were compared to results from a natural rubber/cisabutadiene blend control coating. In addition, selected polymers were evaluated with primary and secondary characterization tests and the results compared to results from the control formulation. One polymer also was used to evaluate the use of a reticulated carbon black to improve thermal conductivity. Several polymers had better crack growth resistance and a number had better flexural fatique resistance than the control polymer. A clorinated polyethylene polymer coated on nylon fabric had properties equivalent to the control polymer coated on nylon fabric. Hysteresis tests at different rates of deformation yielded results which suggested that the standard tests may not identify polymers with improved performance on air cushion vehicles. Woven fabric, knit, and mat structures were evaluated as reinforcements for polymer coatings; the knit and mat structures were not as efficient on a strength-to-weight basis as woven fabrics.

Material, process, and product design of thermoplastic composite materials

NASA Astrophysics Data System (ADS)

Dai, Heming

Thermoplastic composites made of polypropylene (PP) and E-glass fibers were investigated experimentally as well as theoretically for two new classes of product designs. The first application was for reinforcement of wood. Commingled PP/glass yarn was consolidated and bonded on wood panel using a tie layer. The processing parameters, including temperature, pressure, heating time, cooling time, bonding strength, and bending strength were tested experimentally and evaluated analytically. The thermoplastic adhesive interface was investigated with environmental scanning electron microscopy. The wood/composite structural design was optimized and evaluated using a Graphic Method. In the second application, we evaluated use of thermoplastic composites for explosion containment in an arrester. PP/glass yarn was fabricated in a sleeve form and wrapped around the arrester. After consolidation, the flexible composite sleeve forms a solid composite shell. The composite shell acts as a protection layer in a surge test to contain the fragments of the arrester. The manufacturing process for forming the composite shell was designed. Woven, knitted, and braided textile composite shells made of commingled PP/glass yarn were tested and evaluated. Mechanical performance of the woven, knitted, and braided composite shells was examined analytically. The theoretical predictions were used to verify the experimental results.

Active Knits for Radical Change Air Force Structures

DTIC Science & Technology

2012-10-01

for self - healing structures, but the material distribution could be optimized to achieve desired mechanical properties or obtain a predetermined...causes the material to transition from the soft martensite phase to the stiff austenite phase. When heated the loops attempt to return to their...nominally straight, is bent into the loop shape when in the cold, relatively soft martensite state. When heated to the relatively stiff austenite

Applications of Computed Tomography to Evaluate Cellular Solid Interfaces

NASA Technical Reports Server (NTRS)

Maisano, Josephine; Marse, Daryl J.; Schilling, Paul J.

2008-01-01

The major morphological features - foam cells, voids, knit lines, and the bondline interface were evaluated. The features identified by micro-CT correlate well to those observed by SEM. 3D reconstructions yielded volumetric dimensions for large voids (max 30 mm). Internal voids and groupings of smaller cells at the bondline are concluded to be the cause of the indications noted during the NDE prescreening process.

Job Language Performance Requirements for MOS 13B, Cannon Crewman. Volume I & II.

DTIC Science & Technology

1982-10-01

COMPOUND :. Two or more sentences joined by: -1. Coordinating conjunction Explain the task and ask the trainees if they understand the task, end the...protective equipment belt loops boots closures )utton boot socks gas flap button )uttornhole fastened impregnated socks -lothing fastener knitted cuffs...liner t~seiuble it over performing. .. .duties protective ovtrboots )loves primary duties protective socks hours protective clothing shirt liner .nside

78 FR 16661 - Determination Under the Textile and Apparel Commercial Availability Provision of the Dominican...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-03-18

... fabric). Overall weight: 287-351 grams per square meter. Overall width: Selvedge: 150.4-154.4 cm; Minimum... per cm x 43-45 picks per cm Weight: 121.5-148.5 grams per square meter Width: Selvedge: 150.4-154.4 cm... yarns: filament Knitting gauge: 27-29 Weight: 140.4-171.6 grams per square meter Width: Selvedge: 150.4...

Know the Network, Knit the Network: Applying SNA to N2C2 Maturity Model Experiments

DTIC Science & Technology

2010-06-01

Networks (COINS) 2009. Procedia - Social and Behavioral Sciences (2009). Snijders, Tom A.B., Christian E. G. Steglich and Michael Schweinberger...8217 patterning that create social structures. As an interdisciplinary behavioural science specialty, SNA defends that social actors are interdependent...production of social science data involve a process of interpretation. To carry out such interpretation robustly it is understood that it is imperative to

Intrinsically Stretchable and Conductive Textile by a Scalable Process for Elastic Wearable Electronics.

PubMed

Wang, Chunya; Zhang, Mingchao; Xia, Kailun; Gong, Xueqin; Wang, Huimin; Yin, Zhe; Guan, Baolu; Zhang, Yingying

2017-04-19

The prosperous development of stretchable electronics poses a great demand on stretchable conductive materials that could maintain their electrical conductivity under tensile strain. Previously reported strategies to obtain stretchable conductors usually involve complex structure-fabricating processes or utilization of high-cost nanomaterials. It remains a great challenge to produce stretchable and conductive materials via a scalable and cost-effective process. Herein, a large-scalable pyrolysis strategy is developed for the fabrication of intrinsically stretchable and conductive textile in utilizing low-cost and mass-produced weft-knitted textiles as raw materials. Due to the intrinsic stretchability of the weft-knitted structure and the excellent mechanical and electrical properties of the as-obtained carbonized fibers, the obtained flexible and durable textile could sustain tensile strains up to 125% while keeping a stable electrical conductivity (as shown by a Modal-based textile), thus ensuring its applications in elastic electronics. For demonstration purposes, stretchable supercapacitors and wearable thermal-therapy devices that showed stable performance with the loading of tensile strains have been fabricated. Considering the simplicity and large scalability of the process, the low-cost and mass production of the raw materials, and the superior performances of the as-obtained elastic and conductive textile, this strategy would contribute to the development and industrial production of wearable electronics.

Nitinol Esophageal Stents: New Designs and Clinical Indications

DOE Office of Scientific and Technical Information (OSTI.GOV)

Strecker, Ernst-Peter; Boos, Irene; Vetter, Sylvia

1996-11-15

Purpose: To evaluate the clinical use of covered and noncovered, knitted nitinol stents in patients presenting new stent indications. Methods: Self-expandable, knitted nitinol stents were implanted in four patients for treatment of dysphagia. In two patients who had malignant strictures and had esophago-respiratory fistulae and in one patient with an esophagocutaneous fistula, polytetrafluoroethylene (PTFE)-covered stents were implanted. One patient received a noncovered stent, but a retrograde approach through a percutaneous endoscopic gastrostomy (PEG) fistula had to be chosen for recanalization of an esophageal occlusion. Two patients received stents for treatment of benign strictures. Results: Recanalization of the stricture and stentmore » implantation were performed under fluoroscopic control without any procedure-related morbidity or mortality. Dysphagia improved in all patients and the esophageal fistulae could be sealed off by covered stents. During a maximum follow-up of 18 months, there was no stent migration or esophageal perforation. Complications observed were stent stenosis due to food impaction (1/4) and benign stent stenosis (2/2). Most complications could be treated by the interventional radiologist. Conclusion: Self-expandable, covered Nitinol stents provide an option for the treatment of dysphagia combined with esophageal fistulae. In combination with interventional radiology techniques, even complex strictures are accessible. For benign strictures, the value of stent treatment has not yet been proven.« less

Knitting aromatic polymers for efficient solid-phase microextraction of trace organic pollutants.

PubMed

Liu, Shuqin; Hu, Qingkun; Zheng, Juan; Xie, Lijun; Wei, Songbo; Jiang, Ruifen; Zhu, Fang; Liu, Yuan; Ouyang, Gangfeng

2016-06-10

A series of knitting aromatic polymers (KAPs) were successfully synthesized using a simple one-step Friedel-Crafts alkylation of aromatic monomers and were characterized by transmission electron microscopy (TEM), Fourier transform infrared (FTIR) spectroscopy, and X-ray photoelectron spectroscopy (XPS). Then, as-synthesized KAPs with large surface areas, unique pore structures and high thermal stability were prepared as solid-phase microextraction (SPME) coatings that exhibited good extraction abilities for a series of benzene compounds (i.e., benzene, toluene, ethylbenzene and m-xylene, which are referred to as BTEX) and polycyclic aromatic hydrocarbons (PAHs). Under the optimized conditions, the methodologies established for the determination of BTEX and PAHs using the KAPs-triPB and KAPs-B coatings, respectively, possessed wide linear ranges, low limits of detection (LODs, 0.10-1.13ngL(-1) for BTEX and 0.05-0.49ngL(-1) for PAHs) and good reproducibility. Finally, the proposed methods were successfully applied to the determination of BTEX and PAHs in environmental water samples, and satisfactory recoveries (93.6-124.2% for BTEX and 77.2-113.3% for PAHs) were achieved. This study provides a benchmark for exploiting novel microporous organic polymers (MOPs) for SPME applications. Copyright © 2016 Elsevier B.V. All rights reserved.

Physical Characteristics of Medical Textile Prostheses Designed for Hernia Repair: A Comprehensive Analysis of Select Commercial Devices

PubMed Central

Miao, Linli; Wang, Fang; Wang, Lu; Zou, Ting; Brochu, Gaétan; Guidoin, Robert

2015-01-01

Inguinal hernia repairs are among the most frequent operations performed worldwide. This study aims to provide further understanding of structural characteristics of hernia prostheses, and better comprehensive evaluation. Weight, porosity, pore size and other physical characteristics were evaluated; warp knitting structures were thoroughly discussed. Two methods referring to ISO 7198:1998, i.e., weight method and area method, were employed to calculate porosity. Porosity ranged from 37.3% to 69.7% measured by the area method, and 81.1% to 89.6% by the weight method. Devices with two-guide bar structures displayed both higher porosity (57.7%–69.7%) and effective porosity (30.8%–60.1%) than single-guide bar structure (37.3%–62.4% and 0%–5.9%, respectively). Filament diameter, stitch density and loop structure combined determined the thickness, weight and characteristics of pores. They must be well designed to avoid zero effective porosity regarding a single-bar structure. The area method was more effective in characterizing flat sheet meshes while the weight method was perhaps more accurate in describing stereoscopic void space for 3D structure devices. This article will give instructive clues for engineers to improve mesh structures, and better understanding of warp knitting meshes for surgeons. PMID:28793704

Utilization of flax fibers for biomedical applications.

PubMed

Michel, Sophie A A X; Vogels, Ruben R M; Bouvy, Nicole D; Knetsch, Menno L W; van den Akker, Nynke M S; Gijbels, Marion J J; van der Marel, Cees; Vermeersch, Jan; Molin, Daniel G M; Koole, Leo H

2014-04-01

Over the past decades, a large number of animal-derived materials have been introduced for several biomedical applications. Surprisingly, the use of plant-based materials has lagged behind. To study the feasibility of plant-derived biomedical materials, we chose flax (Linum usitatissimum). Flax fibers possess excellent physical-mechanical properties, are nonbiodegradable, and there is extensive know-how on weaving/knitting of them. One area where they could be useful is as implantable mesh structures in surgery, in particular for the repair of incisional hernias of the abdominal wall. Starting with a bleached flax thread, a prototype mesh was specifically knitted for this study, and its cytocompatibility was studied in vitro and in vivo. The experimental data revealed that application of flax in surgery first requires a robust method to remove endotoxins and purify the flax fiber. Such a method was developed, and purified meshes did not cause loss of cell viability in vitro. In addition, endotoxins determined using limulus amebocyte lysate test were at acceptable levels. In vivo, the flax meshes showed only mild inflammation, comparable to commercial polypropylene meshes. This study revealed that plant-derived biomaterials can provide a new class of implantable materials that could be used as surgical meshes or for other biomedical applications. Copyright © 2013 Wiley Periodicals, Inc.

Design Study Conducted of a Stirred and Perfused Specimen Chamber for Culturing Suspended Cells on the International Space Station

NASA Technical Reports Server (NTRS)

Nelson, Emily S.; Kizito, John P.

2003-01-01

A tightly knit numerical/experimental collaboration among the NASA Ames Research Center, NASA Glenn Research Center, and Payload Systems, Inc., was formed to analyze cell culturing systems for the International Space Station. The Cell Culture Unit is a facility scheduled for deployment on the space station by the Cell Culture Unit team at Ames. The facility houses multiple cell specimen chambers (CSCs), all of which have inlets and outlets to allow for replenishment of nutrients and for waste removal. For improved uniformity of nutrient and waste concentrations, each chamber has a pair of counterrotating stir bars as well. Although the CSC can be used to grow a wide variety of organic cells, the current study uses yeast as a model cell. Previous work identified groundbased protocols for perfusion and stirring to achieve yeast growth within the CSC that is comparable to that for yeast cultures grown in a shaken Ehrlenmeyer flask.

Bohr's Creation of his Quantum Atom

NASA Astrophysics Data System (ADS)

Heilbron, John

2013-04-01

Fresh letters throw new light on the content and state of Bohr's mind before and during his creation of the quantum atom. His mental furniture then included the atomic models of the English school, the quantum puzzles of Continental theorists, and the results of his own studies of the electron theory of metals. It also included the poetry of Goethe, plays of Ibsen and Shakespeare, novels of Dickens, and rhapsodies of Kierkegaard and Carlyle. The mind that held these diverse ingredients together oscillated between enthusiasm and dejection during the year in which Bohr took up the problem of atomic structure. He spent most of that year in England, which separated him for extended periods from his close-knit family and friends. Correspondence with his fianc'ee, Margrethe Nørlund, soon to be published, reports his ups and downs as he adjusted to J.J. Thomson, Ernest Rutherford, the English language, and the uneven course of his work. In helping to smooth out his moods, Margrethe played an important and perhaps an enabling role in his creative process.

Clothing creator trademark : Business plan

DOE Office of Scientific and Technical Information (OSTI.GOV)

Stern, B.

SYMAGERY has developed a patented process to manufacture clothing without direct human labor. This CLOTHING CREATOR{trademark}, will have the ability to produce two (2) perfect garments every 45 seconds or one (1) every 30 seconds. The process will combine Computer Integrated Manufacturing (CIM) technology with heat molding and ultrasonic bonding/cutting techniques. This system for garment production, will have the capacity to produce garments of higher quality and at lower productions costs than convention cut and sew methods. ADVANTAGES of the process include: greatly reduced production costs; increased quality of garments; reduction in lead time; and capacity to make new classmore » of garments. This technology will accommodate a variety of knit, woven and nonwoven materials containing a majority of synthetic fibers. Among the many style of garments that could be manufactured by this process are: work clothing, career apparel, athletic garments, medical disposables, health care products, activewear, haz/mat garments, military clothing, cleanroom clothing, outdoor wear, upholstery, and highly contoured stuffed toy shells. 3 refs.« less

Green synthesis of AuNPs for eco-friendly functionalization of cellulosic substrates

NASA Astrophysics Data System (ADS)

Ibrahim, Nabil A.; Eid, Basma M.; Abdel-Aziz, Mohamed S.

2016-12-01

In this research work, extracellular biosynthesis of gold nanoparticles (AuNPs) using marine bacterial isolates (Streptomyces sp.) as a reducing/capping/stabilizing bio-agent and chlolauric acid (HAuCl4) as a precursor has been investigated. Surface modification of cotton and viscose knitted fabrics using O2-plasma followed by subsequent treatment with bio-synthesized AuNPs alone and in combination with TiO2NPs or ZnONPs to impart new functional properties namely antibacterial and UV-blocking were studied. The results show that loading of nominated nanomaterials onto the activated fabric samples results in a significant improvement in antibacterial activity against both G+ve (S. aureus) and G-ve (E. coli) along with a remarkable enhancement in the UV-protection functionality of the treated fabrics. The highest antibacterial and anti-UV values were obtained when O2-plasma treated fabrics were loaded with AuNPs/ZnONPs combination, irrespective of the used substrate. The imparted functional properties demonstrated remarkable retention even after 15 washings.

Material and fabrication strategies for artificial muscles (Conference Presentation)

NASA Astrophysics Data System (ADS)

Spinks, Geoffrey M.

2017-04-01

Soft robotic and wearable robotic devices seek to exploit polymer based artificial muscles and sensor materials to generate biomimetic movements and forces. A challenge is to integrate the active materials into a complex, three-dimensional device with integrated electronics, power supplies and support structures. Both 3D printing and textiles technologies offer attractive fabrication strategies, but require suitable functional materials. 3D printing of actuating hydrogels has been developed to produce simple devices, such as a prototype valve. Tough hydrogels based on interpenetrating networks of ionicially crosslinked alginate and covalently crosslinked polyacrylamide and poly(N-isopropylacrylamide) have been developed in a form suitable for extrusion printing with UV curing. Combined with UV-curable and extrudable rigid acrylated urethanes, the tough hydrogels can be 3D printed into composite materials or complex shapes with multiple different materials. An actuating valve was printed that operated thermally to open or close the flow path using 6 parallel hydrogel actuators. Textile processing methods such as knitting and weaving can be used to generate assemblies of actuating fibres. Low cost and high performance coiled fibres made from oriented polymers have been used for developing actuating textiles. Similarly, braiding methods have been developed to fabricate new forms of McKibben muscles that operate without any external apparatus, such as pumps, compressors or piping.

Material characterization of rigid foam insulation at low temperature

NASA Astrophysics Data System (ADS)

Barrios, Matthew

There is a continuing need for improved rigid foam insulation, particularly for cryogenic storage aboard aerospace vehicles. The present work is a material characterization of spray-on foam insulation used on the Space Shuttle External Tank. The characterization includes imaging and measurements of thermal conductivity, ultimate tensile strength, and moisture absorption. Thermal conductivity measurements are the main focus of the present work, as it is the most relevant property to insulation performance. A novel apparatus was developed to measure the thermal conductivity of rigid foam at temperatures ranging from 20 K to 300 K with a DeltaT of 10 K between the sides of the foam sample. The effective thermal conductivity of three samples of NCFI 24-124 foam insulation was measured over the full temperature range. Additionally, the effects of different residual gases and moisture absorption on the thermal conductivity of the foam were studied. The data were compared to data from the literature and to mathematical models developed to predict the thermal conductivity. The data show that gas condensation can play a significant role in the thermal conductivity of the foam at low temperature. Moisture absorption can occur in the foam in application when cryogenic fuel is filled into a tank which sits in a warm, humid environment. An apparatus was developed to subject foam samples to these conditions. The moisture content in the samples was then measured. The samples were then imaged using the 900 MHz NMR magnet at the National High Magnetic Field Laboratory to determine the location of the water within the foam. Samples conditioned for 9 hours exhibited a 50% weight increase, and samples conditioned for 69 hours exhibited a 284% weight increase. The NMR images showed that the moisture collects first near the warm side of the foam, and permeates through the foam over time. However, the moisture appears to not collect near the knit lines (areas between sprayed layers of foam, containing cells about 10 times smaller than those that make up the bulk of the foam). The 100 kN mechanical testing system at the NHMFL was used to measure the ultimate tensile strength of the foam. The number of samples available limited the amount of measurements, but the data show that the orientation of the foam (parallel or perpendicular to the knit lines) has a greater effect on the tensile strength than does the moisture absorption or exposure to cryogenic temperature.

USSR Report, International Affairs

DTIC Science & Technology

1986-09-25

FRG has already surpassed the United States, and in terms of volume of capital investment per worker the United States lags behind the FRG, Japan and...countries, workers ’ real income is decreasing. For instance, in the United States this figure is currently 14 percent lower than at the beginning of the...enterprises, specifically, a tannery in Yerevan, a shoe-making complex in Voroshilovgrad and a knitted cloth factory in the city of Zhodino.12 The

[Hygienic evaluation of experimental samples of antimicrobial underwear containing hexachlorophene].

PubMed

Borshchenko, V V; Savinich, F K; Gorshkov, V P; Rogatovskaia, A P

1976-01-01

The hygienic examination of 12 samples of knitted underwear which contained hexachlorophene added during fiber formation allowed the selection of four types that can be used under poor sanitation conditions. Taking into consideration possible changes in the proportion of various micoorganisms during prolonged space flights, it is recommended to carry out a complex investigation in order to allow the use of the antimicrobial underwear by specific crewmembers during a certain period of time.

Exploratory Development of Improved Fatigue Strength Adhesives

DTIC Science & Technology

1974-11-01

fiber reinforced adhesives. A fifty-fold in-j crease in fatigue life at equivalent stress levels was achieved when a woven high modulus graphite...the stress level which could survive 10’ fatigue cycles was increased from approximately 30 percent of the ultimate shear strength with nylor knit...supports to as much as fifty percent with the high modulus fiber bond line reinforcement. The stress level which could withstand 10’ fatigue cycles

The Impact of a Knitting Intervention on Compassion Fatigue in Oncology Nurses.

PubMed

Anderson, Lyndsay W; Gustavson, Christina U

2016-02-01

Compassion fatigue is the emotional exhaustion and stress that nurses can feel when caring for terminally ill patients. This can contribute to high nursing turnover rates, result in poor job satisfaction, and lead to decreased ability to provide quality care. Oncology nurses are vulnerable to compassion fatigue because they develop relationships with patients battling life-threatening illnesses, provide end-of-life care, and encounter ethical dilemmas related to cancer treatment. 
.

New generation of wearable goniometers for motion capture systems

PubMed Central

2014-01-01

Background Monitoring joint angles through wearable systems enables human posture and gesture to be reconstructed as a support for physical rehabilitation both in clinics and at the patient’s home. A new generation of wearable goniometers based on knitted piezoresistive fabric (KPF) technology is presented. Methods KPF single-and double-layer devices were designed and characterized under stretching and bending to work as strain sensors and goniometers. The theoretical working principle and the derived electromechanical model, previously proved for carbon elastomer sensors, were generalized to KPF. The devices were used to correlate angles and piezoresistive fabric behaviour, to highlight the differences in terms of performance between the single layer and the double layer sensors. A fast calibration procedure is also proposed. Results The proposed device was tested both in static and dynamic conditions in comparison with standard electrogoniometers and inertial measurement units respectively. KPF goniometer capabilities in angle detection were experimentally proved and a discussion of the device measurement errors of is provided. The paper concludes with an analysis of sensor accuracy and hysteresis reduction in particular configurations. Conclusions Double layer KPF goniometers showed a promising performance in terms of angle measurements both in quasi-static and dynamic working mode for velocities typical of human movement. A further approach consisting of a combination of multiple sensors to increase accuracy via sensor fusion technique has been presented. PMID:24725669

Assessment of Pain and Quality of Life in Lichtenstein Hernia Repair Using a New Monofilament PTFE Mesh: Comparison of Suture vs. Fibrin-Sealant Mesh Fixation

PubMed Central

Fortelny, René H.; Petter-Puchner, Alexander H.; Redl, Heinz; May, Christopher; Pospischil, Wolfgang; Glaser, Karl

2014-01-01

Background: Inguinal hernia repair is one of the most common operations in general surgery. The Lichtenstein tension-free operation has become the gold standard in open inguinal hernia repair. Despite the low recurrence rates, pain and discomfort remain a problem for a large number of patients. The aim of this study was to compare suture fixation vs. fibrin sealing by using a new monofilament PTFE mesh, i.e., the Infinit® mesh by W. L. Gore & Associates. Methods: This study was designed as a controlled prospective single-center two-cohort study. A total of 38 patients were enrolled and operated in Lichtenstein technique either standard suture mesh fixation or fibrin-sealant mesh fixation were used as described in the TIMELI trial. Primary outcome parameters were postoperative complications with the new mesh (i.e., seroma, infection), pain, and quality of life evaluated by the VAS and the SF-36 questionnaire. Secondary outcome was recurrence assessed by ultrasound and physical examination. Follow-up time was 1 year. Results: Significantly, less postoperative pain was reported in the fibrin-sealant group compared to the suture group at 6 weeks (P = 0.035), 6 months (P = 0.023), and 1 year (P = 0.011) postoperatively. Additionally, trends toward a higher postoperative quality of life, a faster surgical procedure, and a shorter hospital stay were seen in the fibrin-sealant group. Conclusion: Fibrin-sealant mesh fixation in Lichtenstein hernioplasty effectively reduces acute and chronic postoperative pain. Monofilament, macro-porous, knitted PTFE meshes seem to be a practicable alternative to commonly used polypropylene meshes in open inguinal hernia repair. PMID:25593969

Assessment of Pain and Quality of Life in Lichtenstein Hernia Repair Using a New Monofilament PTFE Mesh: Comparison of Suture vs. Fibrin-Sealant Mesh Fixation.

PubMed

Fortelny, René H; Petter-Puchner, Alexander H; Redl, Heinz; May, Christopher; Pospischil, Wolfgang; Glaser, Karl

2014-01-01

Inguinal hernia repair is one of the most common operations in general surgery. The Lichtenstein tension-free operation has become the gold standard in open inguinal hernia repair. Despite the low recurrence rates, pain and discomfort remain a problem for a large number of patients. The aim of this study was to compare suture fixation vs. fibrin sealing by using a new monofilament PTFE mesh, i.e., the Infinit(®) mesh by W. L. Gore & Associates. This study was designed as a controlled prospective single-center two-cohort study. A total of 38 patients were enrolled and operated in Lichtenstein technique either standard suture mesh fixation or fibrin-sealant mesh fixation were used as described in the TIMELI trial. Primary outcome parameters were postoperative complications with the new mesh (i.e., seroma, infection), pain, and quality of life evaluated by the VAS and the SF-36 questionnaire. Secondary outcome was recurrence assessed by ultrasound and physical examination. Follow-up time was 1 year. Significantly, less postoperative pain was reported in the fibrin-sealant group compared to the suture group at 6 weeks (P = 0.035), 6 months (P = 0.023), and 1 year (P = 0.011) postoperatively. Additionally, trends toward a higher postoperative quality of life, a faster surgical procedure, and a shorter hospital stay were seen in the fibrin-sealant group. Fibrin-sealant mesh fixation in Lichtenstein hernioplasty effectively reduces acute and chronic postoperative pain. Monofilament, macro-porous, knitted PTFE meshes seem to be a practicable alternative to commonly used polypropylene meshes in open inguinal hernia repair.

Comfort Characterization of Various Fabrics for Extremity Protection

DTIC Science & Technology

2013-09-01

comfort, permeability, drape , stretch 16. SECURITY CLASSIFICATION OF: 17. LIMITATION OF ABSTRACT UU 18. NUMBER OF PAGES 48 19a. NAME OF...such as fabric “ drape ” (i.e., the ability to conform to a surface), which is thought to be a function of bending and in-plane shear stiffness (2...test (17), Kawabata tests (18), and the Cusick drape test (19). In general, knits appear to provide the best combination of breathability and ease of

Effect of Stitching on Debonding in Composite Structural Elements

NASA Technical Reports Server (NTRS)

Raju, I. S.; Glaessgen, E. H.

2001-01-01

Stitched multiaxial warp knit materials have been suggested as viable alternatives to laminated prepreg materials for large aircraft structures such as wing skins. Analyses have been developed to quantify the effectiveness of stitching for reducing strain energy release rates in skin-stiffener debond, lap joint and sandwich debond configurations. Strain energy release rates were computed using the virtual crack closure technique. In all configurations, the stitches were shown to significantly reduce the strain energy release rate.

Comparison of resin film infusion, resin transfer molding, and consolidation of textile preforms for primary aircraft structure

NASA Technical Reports Server (NTRS)

Suarez, J.; Dastin, S.

1992-01-01

Under NASA's Novel Composites for Wing and Fuselage Applications (NCWFA) Program, Grumman is developing innovative design concepts and cost-effective fabrication processes for damage-tolerant primary structures that can perform at a design ultimate strain level of 6000 micro-inch/inch. Attention has focused on the use of textile high-performance fiber-reinforcement concepts that provide improved damage tolerance and out-of-plane load capability, low-cost resin film infusion (RFI) and resin transfer molding (RTM) processes, and thermoplastic forming concepts. The fabrication of wing 'Y' spars by four different materials/processes methods is described: 'Y' spars fabricated using IM7 angle interlock 0/90 deg woven preforms with +/- 45 deg plies stitched with Toray high-strength graphite thread and processed using RFI and 3501-6 epoxy; 'Y' spars fabricated using G40-800 knitted/stitched preforms and processed using RFI and 3501-6 epoxy; 'Y' spars fabricated using G40-800 knitted/stitched preforms and processed using RTM and Tactix 123/H41 epoxy; and 'Y' spars fabricated using AS4(6k)/PEEK 150-g commingled angle interlock 0/90 deg woven preforms with +/- 45 deg commingled plies stitched using high-strength graphite thread and processed by consolidation. A comparison of the structural efficiency, processability, and projected acquisition cost of these representative spars is presented.

In vivo evaluation of hybrid patches composed of PLA based copolymers and collagen/chondroitin sulfate for ligament tissue regeneration.

PubMed

Pinese, Coline; Gagnieu, Christian; Nottelet, Benjamin; Rondot-Couzin, Capucine; Hunger, Sylvie; Coudane, Jean; Garric, Xavier

2017-10-01

Biomaterials for soft tissues regeneration should exhibit sufficient mechanical strength, demonstrating a mechanical behavior similar to natural tissues and should also promote tissues ingrowth. This study was aimed at developing new hybrid patches for ligament tissue regeneration by synergistic incorporation of a knitted structure of degradable polymer fibers to provide mechanical strength and of a biomimetic matrix to help injured tissues regeneration. PLA- Pluronic ® (PLA-P) and PLA-Tetronic ® (PLA-T) new copolymers were shaped as knitted patches and were associated with collagen I (Coll) and collagen I/chondroitine-sulfate (Coll CS) 3-dimensional matrices. In vitro study using ligamentocytes showed the beneficial effects of CS on ligamentocytes proliferation. Hybrid patches were then subcutaneously implanted in rats for 4 and 12 weeks. Despite degradation, patches retained strength to answer the mechanical physiological needs. Tissue integration capacity was assessed with histological studies. We showed that copolymers, associated with collagen and chondroitin sulfate sponge, exhibited very good tissue integration and allowed neotissue synthesis after 12 weeks in vivo. To conclude, PLA-P/CollCS and PLA-T/CollCS hybrid patches in terms of structure and composition give good hopes for tendon and ligament regeneration. © 2016 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater, 105B: 1778-1788, 2017. © 2016 Wiley Periodicals, Inc.

Translating textiles to tissue engineering: Creation and evaluation of microporous, biocompatible, degradable scaffolds using industry relevant manufacturing approaches and human adipose derived stem cells.

PubMed

Haslauer, Carla M; Avery, Matthew R; Pourdeyhimi, Behnam; Loboa, Elizabeth G

2015-07-01

Polymeric scaffolds have emerged as a means of generating three-dimensional tissues, such as for the treatment of bone injuries and nonunions. In this study, a fibrous scaffold was designed using the biocompatible, degradable polymer poly-lactic acid in combination with a water dispersible sacrificial polymer, EastONE. Fibers were generated via industry relevant, facile scale-up melt-spinning techniques with an islands-in-the-sea geometry. Following removal of EastONE, a highly porous fiber remained possessing 12 longitudinal channels and pores throughout all internal and external fiber walls. Weight loss and surface area characterization confirmed the generation of highly porous fibers as observed via focused ion beam/scanning electron microscopy. Porous fibers were then knit into a three-dimensional scaffold and seeded with human adipose-derived stem cells (hASC). Confocal microscopy images confirmed hASC attachment to the fiber walls and proliferation throughout the knit structure. Quantification of cell-mediated calcium accretion following culture in osteogenic differentiation medium confirmed hASC differentiation throughout the porous constructs. These results suggest incorporation of a sacrificial polymer within islands-in-the-sea fibers generates a highly porous scaffold capable of supporting stem cell viability and differentiation with the potential to generate large three-dimensional constructs for bone regeneration and/or other tissue engineering applications. © 2014 Wiley Periodicals, Inc.

Advanced stitching technology

NASA Technical Reports Server (NTRS)

Scardino, Frank L.

1992-01-01

In the design of textile composites, the selection of materials and constructional techniques must be matched with product performance, productivity, and cost requirements. Constructional techniques vary. A classification of various textile composite systems is given. In general, the chopped fiber system is not suitable for structural composite applications because of fiber discontinuity, uncontrolled fiber orientation and a lack of fiber integration or entanglement. Linear filament yarn systems are acceptable for structural components which are exposed to simple tension in their applications. To qualify for more general use as structural components, filament yarn systems must be multi-directionally positioned. With the most sophisticated filament winding and laying techniques, however, the Type 2 systems have limited potential for general load-bearing applications because of a lack of filament integration or entanglement, which means vulnerability to splitting and delamination among filament layers. The laminar systems (Type 3) represented by a variety of simple fabrics (woven, knitted, braided and nonwoven) are especially suitable for load-bearing panels in flat form and for beams in a roled up to wound form. The totally integrated, advanced fabric system (Type 4) are thought to be the most reliable for general load-bearing applications because of fiber continuity and because of controlled multiaxial fiber orientation and entanglement. Consequently, the risk of splitting and delamination is minimized and practically omitted. Type 4 systems can be woven, knitted, braided or stitched through with very special equipment. Multiaxial fabric technologies are discussed.

Medical Textiles as Vascular Implants and Their Success to Mimic Natural Arteries

PubMed Central

Singh, Charanpreet; Wong, Cynthia S.; Wang, Xungai

2015-01-01

Vascular implants belong to a specialised class of medical textiles. The basic purpose of a vascular implant (graft and stent) is to act as an artificial conduit or substitute for a diseased artery. However, the long-term healing function depends on its ability to mimic the mechanical and biological behaviour of the artery. This requires a thorough understanding of the structure and function of an artery, which can then be translated into a synthetic structure based on the capabilities of the manufacturing method utilised. Common textile manufacturing techniques, such as weaving, knitting, braiding, and electrospinning, are frequently used to design vascular implants for research and commercial purposes for the past decades. However, the ability to match attributes of a vascular substitute to those of a native artery still remains a challenge. The synthetic implants have been found to cause disturbance in biological, biomechanical, and hemodynamic parameters at the implant site, which has been widely attributed to their structural design. In this work, we reviewed the design aspect of textile vascular implants and compared them to the structure of a natural artery as a basis for assessing the level of success as an implant. The outcome of this work is expected to encourage future design strategies for developing improved long lasting vascular implants. PMID:26133386

Distributed Spacing Stochastic Feature Selection and its Application to Textile Classification

DTIC Science & Technology

2011-09-01

Spandex, (b) 65% Polyester / 35% Cot- ton vs 94% Polyester / 6% Spandex, (c) 65% Polyester / 35% Cotton vs 100% Cotton , and (d) 65% Polyester / 35% Cotton ...3-29 3.10. This is an example of the final feature selection process for 100% Cotton Woven, with acceptable distributed spacing set to a 35...3-40 4.1. Representative samples from the 12 class textile data set: 65% Polyester 35% Cotton Woven (red), 80% Nylon 20% Spandex Knit (green), 97

Cardiac transplantation. Organ procurement to patient discharge.

PubMed

Rudolphi, D M; Nagy, K M; Verne, D J

1987-01-01

The care of the cardiac transplant patient is complex, yet rewarding. During the hospital stay, the patients, families, and nurses develop close-knit relationships that last after discharge. The cardiac transplant patients at Hershey Medical Center have formed a support group. To promote organ donation, they wear T-shirts, hats, and coats with the logo, "I got my heart at HMC," (Hershey Medical Center). This not only increases awareness of the need for organ donation, but also gives Hershey Medical Center recognition for its cardiac transplantation program.

High-performance two-ply yarn supercapacitors based on carbon nanotubes and polyaniline nanowire arrays.

PubMed

Wang, Kai; Meng, Qinghai; Zhang, Yajie; Wei, Zhixiang; Miao, Menghe

2013-03-13

Fine count two-ply yarn supercapacitors are constructed from carbon nanotube yarns and polyaniline nanowires. The thread-like supercapacitor possess excellent electrochemical capacity and are very strong and flexible. When being woven or knitted into wearable electronic devices, alone or in combination with conventional textile yarns, the two-ply yarn supercapacitors can be flexed and stretched repeatedly without significant loss of capacitance. Copyright © 2013 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

The role of ethics in data governance of large neuro-ICT projects.

PubMed

Stahl, Bernd Carsten; Rainey, Stephen; Harris, Emma; Fothergill, B Tyr

2018-05-14

We describe current practices of ethics-related data governance in large neuro-ICT projects, identify gaps in current practice, and put forward recommendations on how to collaborate ethically in complex regulatory and normative contexts. We undertake a survey of published principles of data governance of large neuro-ICT projects. This grounds an approach to a normative analysis of current data governance approaches. Several ethical issues are well covered in the data governance policies of neuro-ICT projects, notably data protection and attribution of work. Projects use a set of similar policies to ensure users behave appropriately. However, many ethical issues are not covered at all. Implementation and enforcement of policies remain vague. The data governance policies we investigated indicate that the neuro-ICT research community is currently close-knit and that shared assumptions are reflected in infrastructural aspects. This explains why many ethical issues are not explicitly included in data governance policies at present. With neuro-ICT research growing in scale, scope, and international involvement, these shared assumptions should be made explicit and reflected in data governance.

Effect of fabric mounting method and backing material on bloodstain patterns of drip stains on textiles.

PubMed

Chang, J Y M; Michielsen, S

2016-05-01

Textiles may provide valuable bloodstain evidence to help piece together events or activities at violent crime scenes. However, in spite of over 75 years of research, there are still difficulties encountered in many cases in the interpretation and identification of bloodstains on textiles. In this study, we dripped porcine blood onto three types of fabric (plain woven, single jersey knit, and denim) that are supported in four different ways (hard, taut, loose, and semi-hard, i.e., fabric laid on denim). These four mounting methods represent different ways in which a textile may be present when blood from a violent act lands on it. This study investigates how the fabric mounting method and backing material affect the appearance of drip stains on textiles. We found that bloodstain patterns formed on fabric lying flat on a hard surface were very different from when the same fabric was suspended loosely. We also found that bloodstains formed on the technical back of single jersey knit were vastly different from those on the technical face. Interestingly, some drip stains showed blood passing through the textile and leaving a stain behind it that resembled insect stains. By observing, recording, and describing how a blood stained textile is found or presented at the scene, the analyst may be able to better understand bloodstains and bloodstain patterns on textiles, which could be useful to confirm or refute a witness's account of how blood came to be where it was found after a bloodshed event.

Resin Film Infusion (RFI) Process Modeling for Large Transport Aircraft Wing Structures

NASA Technical Reports Server (NTRS)

Knott, Tamara W.; Loos, Alfred C.

2000-01-01

Resin film infusion (RFI) is a cost-effective method for fabricating stiffened aircraft wing structures. The RFI process lends itself to the use of near net shape textile preforms manufactured through a variety of automated textile processes such as knitting and braiding. Often, these advanced fiber architecture preforms have through-the-thickness stitching for improved damage tolerance and delamination resistance. The challenge presently facing RFI is to refine the process to ensure complete infiltration and cure of a geometrically complex shape preform with the high fiber volume fraction needed for structural applications. An accurate measurement of preform permeability is critical for successful modeling of the RFI resin infiltration process. Small changes in the permeability can result in very different infiltration behavior and times. Therefore, it is important to accurately measure the permeabilities of the textile preforms used in the RFI process. The objective of this investigation was to develop test methods that can be used to measure the compaction behavior and permeabilities of high fiber volume fraction, advanced fiber architecture textile preforms. These preforms are often highly compacted due to through-the-thickness stitching used to improve damage tolerance. Test fixtures were designed and fabricated and used to measure both transverse and in-plane permeabilities. The fixtures were used to measure the permeabilities of multiaxial warp knit and triaxial braided preforms at fiber volume fractions from 55% to 65%. In addition, the effects of stitching characteristics, thickness, and batch variability on permeability and compaction behavior were investigated.

Effects of chitosan and bioactive glass modifications of knitted and rolled polylactide-based 96/4 L/D scaffolds on chondrogenic differentiation of adipose stem cells.

PubMed

Ahtiainen, Katja; Sippola, Laura; Nurminen, Manu; Mannerström, Bettina; Haimi, Suvi; Suuronen, Riitta; Hyttinen, Jari; Ylikomi, Timo; Kellomäki, Minna; Miettinen, Susanna

2015-01-01

The performance of biodegradable knitted and rolled 3-dimensional (3D) polylactide-based 96/4 scaffolds modified with bioactive glass (BaG) 13-93, chitosan and both was compared with regard to the viability, proliferation and chondrogenic differentiation of rabbit adipose stem cells (ASCs). Scaffold porosities were determined by micro-computed tomography (μCT). Water absorption and degradation of scaffolds were studied during 28-day hydrolysis in Tris-buffer. Viability, number and differentiation of ASCs in PLA96/4 scaffolds were examined in vitro. The dimensions of the scaffolds were maintained during hydrolysis and mass loss was detected only in the BaG13-93 containing scaffolds. ASCs adhered and proliferated on each scaffold type. Cell aggregation and expression of chondral matrix components improved in all scaffold types in chondrogenic medium. Signs of hypertrophy were detected in the modified scaffolds but not in the plain PLA96/4 scaffold. Chondrogenic differentiation was most enhanced in the presence of chitosan. These findings indicate that the plain P scaffold provided a good 3D-matrix for ASC proliferation whereas the addition of chitosan to the PLA96/4 scaffold induced chondrogenic differentiation independent of the medium. Accordingly, a PLA96/4 scaffold modified by chitosan could provide a functional and bioactive basis for tissue-engineered chondral implants. Copyright © 2012 John Wiley & Sons, Ltd.

Protective constriction of coronary vein grafts with knitted nitinol

PubMed Central

Moodley, Loven; Franz, Thomas; Human, Paul; Wolf, Michael F.; Bezuidenhout, Deon; Scherman, Jacques; Zilla, Peter

2013-01-01

OBJECTIVES Different flow patterns and shear forces were shown to cause significantly more luminal narrowing and neointimal tissue proliferation in coronary than in infrainguinal vein grafts. As constrictive external mesh support of vein grafts led to the complete suppression of intimal hyperplasia (IH) in infrainguinal grafts, we investigated whether mesh constriction is equally effective in the coronary position. METHODS Eighteen senescent Chacma baboons (28.8 ± 3.6 kg) received aorto-coronary bypass grafts to the left anterior descending artery (LAD). Three groups of saphenous vein grafts were compared: untreated controls (CO); fibrin sealant-sprayed controls (CO + FS) and nitinol mesh-constricted grafts (ME + FS). Meshes consisted of pulse-compliant, knitted nitinol (eight needles; 50 μm wire thickness; 3.4 mm resting inner diameter, ID) spray attached to the vein grafts with FS. After 180 days of implantation, luminal dimensions and IH were analysed using post-explant angiography and macroscopic and histological image analysis. RESULTS At implantation, the calibre mismatch between control grafts and the LAD expressed as cross-sectional quotient (Qc) was pronounced [Qc = 0.21 ± 0.07 (CO) and 0.18 ± 0.05 (CO + FS)]. Mesh constriction resulted in a 29 ± 7% reduction of the outer diameter of the vein grafts from 5.23 ± 0.51 to 3.68 ± 0 mm, significantly reducing the calibre discrepancy to a Qc of 0.41 ± 0.17 (P < 0.02). After 6 months of implantation, explant angiography showed distinct luminal irregularities in control grafts (ID difference between widest and narrowest segment 74 ± 45%), while diameter variations were mild in mesh-constricted grafts. In all control grafts, thick neointimal tissue was present [600 ± 63 μm (CO); 627 ± 204 μm (CO + FS)] as opposed to thin, eccentric layers of 249 ± 83 μm in mesh-constricted grafts (ME + FS; P < 0.002). The total wall thickness had increased by 363 ± 39% (P < 0.00001) in CO and 312 ± 61% (P < 0.00001) in CO + FS vs 82 ± 61% in ME + FS (P < 0.007). CONCLUSIONS In a senescent non-human primate model for coronary artery bypass grafts, constrictive, external mesh support of saphenous veins with knitted nitinol prevented focal, irregular graft narrowing and suppressed neointimal tissue proliferation by a factor of 2.5. The lower degree of suppression of IH compared with previous infrainguinal grafts coincided with a lesser reduction of calibre mismatch in the coronary grafts. PMID:23295444

Energy Landscape of Social Balance

NASA Astrophysics Data System (ADS)

Marvel, Seth A.; Strogatz, Steven H.; Kleinberg, Jon M.

2009-11-01

We model a close-knit community of friends and enemies as a fully connected network with positive and negative signs on its edges. Theories from social psychology suggest that certain sign patterns are more stable than others. This notion of social “balance” allows us to define an energy landscape for such networks. Its structure is complex: numerical experiments reveal a landscape dimpled with local minima of widely varying energy levels. We derive rigorous bounds on the energies of these local minima and prove that they have a modular structure that can be used to classify them.

Energy landscape of social balance.

PubMed

Marvel, Seth A; Strogatz, Steven H; Kleinberg, Jon M

2009-11-06

We model a close-knit community of friends and enemies as a fully connected network with positive and negative signs on its edges. Theories from social psychology suggest that certain sign patterns are more stable than others. This notion of social "balance" allows us to define an energy landscape for such networks. Its structure is complex: numerical experiments reveal a landscape dimpled with local minima of widely varying energy levels. We derive rigorous bounds on the energies of these local minima and prove that they have a modular structure that can be used to classify them.

Reduction of noise generated by air conditioning and ventilation plants and transmitted to inhabited areas. [application of silencers

NASA Technical Reports Server (NTRS)

Harastaseanu, E.; Cristescu, G.; Mercea, F.

1974-01-01

The fans with which the conditioning and ventilation plants of weaving and spinning mills are equipped and the conditioning devices used in certain confection and knit wear departments of the textile industry generate loud noise. Solutions are presented for reducing the noise generated by the fans of ventilation and conditioning plants and transmitted to inhabited regions down to the admissible level, as well as the results obtained by experimental application of some noise reduction solutions in the conditioning plants of a spinning mill.

How the brain goes out of its mind

NASA Technical Reports Server (NTRS)

Hobson, J. A.

1996-01-01

Dreaming is characterized by formal visual imagery (akin to hallucination), by inconstancy of time, place and person (akin to disorientation), by a scenario-like knitting together of disparate elements (akin to confabulation) and by an inability to recall (akin to amnesia). Taken together, these four dream features are similar to the delirium of organic brain disease. By studying the brain during rapid-eye-movement (REM) sleep--the phase of sleep in which most dreaming occurs--we can begin to understand its basis in the altered neurophysiology of REM.

Thermoplastic coating of carbon fibers

NASA Technical Reports Server (NTRS)

Edie, D. D.; Lickfield, G. C.; Drews, M. J.; Ellison, M. S.; Allen, L. E.; Mccollum, J. R.; Thomas, H. L.

1988-01-01

Now that quantities of prepreg were made on the thermoplastic coating line, they are being formed into both textile preform structures and directly into composite samples. The textile preforms include both woven and knitted structures which will be thermoformed into a finished part. In order to determine if the matrix resin is properly adhering to the fibers or if voids are being formed in the coating process, the tensile strength and modulus of these samples will be tested. The matrix uniformity of matrix distribution in these samples is also being determined using an image analyzer.

Material Property Characterization of AS4/VRM-34 Textile Laminates

NASA Technical Reports Server (NTRS)

Grenoble, Ray W.; Johnston, William M

2013-01-01

Several material properties (modulus, strengths, and fracture toughness) of a textile composite have been evaluated to provide input data to analytical models of Pultruded Rod Stiffened Efficient Unitized Structure (PRSEUS). The material system is based on warp-knitted preforms of AS4 carbon fibers and VRM-34 epoxy resin, which have been processed via resin infusion and oven curing. Tensile, compressive, shear, and fracture toughness properties have been measured at ambient and elevated temperatures. All specimens were tested in as-fabricated (dry) condition. Specimens were tested with and without through-thickness stitching.

The Effects of Industrial Protective Gloves and Hand Skin Temperatures on Hand Grip Strength and Discomfort Rating

PubMed Central

2017-01-01

Daily working activities and functions require a high contribution of hand and forearm muscles in executing grip force. To study the effects of wearing different gloves on grip strength, under a variety of hand skin temperatures, an assessment of the maximum grip strength was performed with 32 healthy male workers with a mean age (standard deviation) of 30.44 (5.35) years wearing five industrial gloves at three hand skin temperatures. Their ages and anthropometric characteristics including body mass index (BMI), hand length, hand width, hand depth, hand palm, and wrist circumference were measured. The hand was exposed to different bath temperatures (5 °C, 25 °C, and 45 °C) and hand grip strength was measured using a Jamar hydraulic hand dynamometer with and without wearing the gloves (chemical protection glove, rubber insulating glove, anti-vibration impact glove, cotton yarn knitted glove, and RY-WG002 working glove). The data were analyzed using the Shapiro–Wilk test, Pearson correlation coefficient, Tukey test, and analysis of variance (ANOVA) of the within-subject design analysis. The results showed that wearing gloves significantly affected the maximum grip strength. Wearing the RY-WG002 working glove produced a greater reduction on the maximum grip when compared with the bare hand, while low temperatures (5 °C) had a significant influence on grip when compared to medium (25 °C) and high (45 °C) hand skin temperatures. In addition, participants felt more discomfort in both environmental extreme conditions. Furthermore, they reported more discomfort while wearing neoprene, rubber, and RY-WG002 working gloves. PMID:29207573

Insurance-related Practices at Title X-funded Family Planning Centers under the Affordable Care Act: Survey and Interview Findings.

PubMed

Zolna, Mia R; Kavanaugh, Megan L; Hasstedt, Kinsey

Given the recent reforms in the United States health care system, including the passage and implementation of the Affordable Care Act, as well as anticipated upcoming changes to health care coverage, it is critical that publicly funded health care providers understand how to effectively work with their states' Medicaid programs and the private health insurance plans in their service areas to provide high-quality contraceptive care to the millions of women relying on services at these sites annually. We collected survey data from a nationally representative sample of 535 clinics providing family planning services that received Title X funding and conducted semistructured interviews with 23 administrators at a subsample of surveyed clinics to explore provider-reported experiences working with health plans and to identify barriers to, and practices that lead to, adequate reimbursement for services provided. Providers report that knowledgeable staff are crucial to securing contracts with both public and private insurance plan issuers, and that the contracts they secure often include coverage restrictions on methods or services clinics offer their clients. Good staff relationships with issuers are key to obtaining adequate and consistent reimbursement for all covered services. Providers are trying to understand how insurance programs in their area knit together. Regardless of how U.S. health policies and delivery systems may change in the coming years, it is imperative that publicly funded family planning centers continue to work with health plans and maximize their third-party revenue to provide services to those in need. Copyright © 2017 The Authors. Published by Elsevier Inc. All rights reserved.

Insurance-related Practices at Title X-funded Family Planning Centers under the Affordable Care Act: Survey and Interview Findings

PubMed Central

Zolna, Mia R.; Kavanaugh, Megan L.; Hasstedt, Kinsey

2018-01-01

Introduction Given the recent reforms in the United States health care system, including the passage and implementation of the Affordable Care Act, as well as anticipated upcoming changes to health care coverage, it is critical that publicly funded health care providers understand how to effectively work with their states’ Medicaid programs and the private health insurance plans in their service areas to provide high-quality contraceptive care to the millions of women relying on services at these sites annually. Methods We collected survey data from a nationally representative sample of 535 clinics providing family planning services that received Title X funding and conducted semistructured interviews with 23 administrators at a subsample of surveyed clinics to explore provider-reported experiences working with health plans and to identify barriers to, and practices that lead to, adequate reimbursement for services provided. Results Providers report that knowledgeable staff are crucial to securing contracts with both public and private insurance plan issuers, and that the contracts they secure often include coverage restrictions on methods or services clinics offer their clients. Good staff relationships with issuers are key to obtaining adequate and consistent reimbursement for all covered services. Conclusions Providers are trying to understand how insurance programs in their area knit together. Regardless of how U.S. health policies and delivery systems may change in the coming years, it is imperative that publicly funded family planning centers continue to work with health plans and maximize their third-party revenue to provide services to those in need. PMID:29108987

Capitalizing on Community: the Small College Environment and the Development of Researchers

NASA Astrophysics Data System (ADS)

Stoneking, M. R.

2014-03-01

Liberal arts colleges constitute an important source of and training ground for future scientists. At Lawrence University, we take advantage of our small college environment to prepare physics students for research careers by complementing content acquisition with skill development and project experience distributed throughout the curriculum and with co-curricular elements that are tied to our close-knit supportive physics community. Small classes and frequent contact between physics majors and faculty members offer opportunities for regular and detailed feedback on the development of research relevant skills such as laboratory record-keeping, data analysis, electronic circuit design, computational programming, experimental design and modification, and scientific communication. Part of our approach is to balance collaborative group work on small projects (such as Arduino-based electronics projects and optical design challenges) with independent work (on, for example, advanced laboratory experimental extensions and senior capstone projects). Communal spaces and specialized facilities (experimental and computational) and active on-campus research programs attract eager students to the program, establish a community-based atmosphere, provide unique opportunities for the development of research aptitude, and offer opportunities for genuine contribution to a research program. Recently, we have also been encouraging innovativetendencies in physics majors through intentional efforts to develop personal characteristics, encouraging students to become more tolerant of ambiguity, risk-taking, initiative-seeking, and articulate. Indicators of the success of our approach include the roughly ten physics majors who graduate each year and our program's high ranking among institutions whose graduates go on to receive the Ph.D. in physics. Work supported in part by the National Science Foundation.

How Do My Friends Matter? Examining Latino Adolescents' Friendships, School Belonging, and Academic Achievement.

PubMed

Delgado, Melissa Y; Ettekal, Andrea Vest; Simpkins, Sandra D; Schaefer, David R

2016-06-01

Are Latino adolescents' friendships an untapped resource for academic achievement or perhaps one of the reasons why these youth struggle academically? Using data from the National Longitudinal Study of Adolescent Health (N = 6782; 7th through 12th graders; 52.9 % female), we examined whether the process of Latino students' school belonging mediated the relationships between the context of friendships (i.e., friendship network indicators) and their academic outcomes (i.e., a context-process-outcomes model), and tested whether the process-context link varied by friends' characteristics (i.e., GPA and problem behavior; social capital). Moreover, we tested whether all relationships varied across the four largest Latino subgroups in the U.S. (i.e., Mexican, Central/South American, Puerto Rican, and Cuban). Our findings indicate that being nominated as a friend by peers and perceiving to have friends exerted both direct effects on school belonging in all but one of the Latino ethnic samples (i.e., Puerto Rican samples) and indirect effects on academic achievement in the full Latino, Mexican, and Central/South American samples. As such, school belonging was more likely to explain the links between academic achievement with nominations by peers as a friend and perceived friends than with having close-knit friendship groups. However, having a close-knit group of average or low-achieving friends predicted more school belonging for Mexican youth, but less school belonging for Cubans. Our findings suggest that friendships may be particularly beneficial for the school belonging process of highly marginalized groups in the U.S. (i.e., Mexican-origin).

Development of Textile Reinforced Composites for Aircraft Structures

NASA Technical Reports Server (NTRS)

Dexter, H. Benson

1998-01-01

NASA has been a leader in development of composite materials for aircraft applications during the past 25 years. In the early 1980's NASA and others conducted research to improve damage tolerance of composite structures through the use of toughened resins but these resins were not cost-effective. The aircraft industry wanted affordable, robust structures that could withstand the rigors of flight service with minimal damage. The cost and damage tolerance barriers of conventional laminated composites led NASA to focus on new concepts in composites which would incorporate the automated manufacturing methods of the textiles industry and which would incorporate through-the-thickness reinforcements. The NASA Advanced Composites Technology (ACT) Program provided the resources to extensively investigate the application of textile processes to next generation aircraft wing and fuselage structures. This paper discusses advanced textile material forms that have been developed, innovative machine concepts and key technology advancements required for future application of textile reinforced composites in commercial transport aircraft. Multiaxial warp knitting, triaxial braiding and through-the-thickness stitching are the three textile processes that have surfaced as the most promising for further development. Textile reinforced composite structural elements that have been developed in the NASA ACT Program are discussed. Included are braided fuselage frames and window-belt reinforcements, woven/stitched lower fuselage side panels, stitched multiaxial warp knit wing skins, and braided wing stiffeners. In addition, low-cost processing concepts such as resin transfer molding (RTM), resin film infusion (RFI), and vacuum-assisted resin transfer molding (VARTM) are discussed. Process modeling concepts to predict resin flow and cure in textile preforms are also discussed.

Cultural and Intellectual Openness Differentially Relate to Social Judgments of Potential Work Partners.

PubMed

Porter, Caitlin M; Parrigon, Scott E; Woo, Sang Eun; Saef, Rachel M; Tay, Louis

2017-10-01

This study investigates the differential functioning of cultural and intellectual openness (the two aspects of Openness to Experience) in relation to social cognitive processes by examining how they influence people's perceptions and interpretations of social information when deciding to initiate working relationships. Using a policy-capturing design, 681 adult participants were asked to rate their similarity to and preference to work with potential work partners characterized by varying nationalities and levels of work-related competence. Multilevel moderated mediation was conducted to simultaneously evaluate whether the indirect effects of potential work partners' characteristics (i.e., nationalities and levels of work-related competence) on work partner preference through perceived similarity were moderated by cultural and intellectual openness. Perceived similarity mediated the relationships between work partner nationality and work-related competence and participants' work partner preferences. Furthermore, the negative indirect effect of work partner nationality on work partner preference via perceived similarity was attenuated by cultural openness, and the positive indirect effect of work partner work-related competence on work partner preference via perceived similarity was strengthened by intellectual openness. Cultural and intellectual openness may have distinct functions that influence how people perceive, evaluate, and appreciate social information when making social judgments. © 2016 Wiley Periodicals, Inc.

Developing an Acoustic Sensing Yarn for Health Surveillance in a Military Setting.

PubMed

Hughes-Riley, Theodore; Dias, Tilak

2018-05-17

Overexposure to high levels of noise can cause permanent hearing disorders, which have a significant adverse effect on the quality of life of those affected. Injury due to noise can affect people in a variety of careers including construction workers, factory workers, and members of the armed forces. By monitoring the noise exposure of workers, overexposure can be avoided and suitable protective equipment can be provided. This work focused on the creation of a noise dosimeter suitable for use by members of the armed forces, where a discrete dosimeter was integrated into a textile helmet cover. In this way the sensing elements could be incorporated very close to the ears, providing a highly representative indication of the sound level entering the body, and also creating a device that would not interfere with military activities. This was achieved by utilising commercial microelectromechanical system microphones integrated within the fibres of yarn to create an acoustic sensing yarn. The acoustic sensing yarns were fully characterised over a range of relevant sound levels and frequencies at each stage in the yarn production process. The yarns were ultimately integrated into a knitted helmet cover to create a functional acoustic sensing helmet cover prototype.

Impact of disguise on identification decisions and confidence with simultaneous and sequential lineups.

PubMed

Mansour, Jamal K; Beaudry, Jennifer L; Bertrand, Michelle I; Kalmet, Natalie; Melsom, Elisabeth I; Lindsay, Roderick C L

2012-12-01

Prior research indicates that disguise negatively affects lineup identifications, but the mechanisms by which disguise works have not been explored, and different disguises have not been compared. In two experiments (Ns = 87 and 91) we manipulated degree of coverage by two different types of disguise: a stocking mask or sunglasses and toque (i.e., knitted hat). Participants viewed mock-crime videos followed by simultaneous or sequential lineups. Disguise and lineup type did not interact. In support of the view that disguise prevents encoding, identification accuracy generally decreased with degree of disguise. For the stocking disguise, however, full and 2/3 coverage led to approximately the same rate of correct identifications--which suggests that disrupting encoding of specific features may be as detrimental as disrupting a whole face. Accuracy was most affected by sunglasses and we discuss the role metacognitions may have played. Lineup selections decreased more slowly than accuracy as coverage by disguise increased, indicating witnesses are insensitive to the effect of encoding conditions on accuracy. We also explored the impact of disguise and lineup type on witnesses' confidence in their lineup decisions, though the results were not straightforward.

Public Health Nurses' Activities for Suicide Prevention in Japan.

PubMed

Marutani, Miki; Yamamoto-Mitani, Noriko; Kodama, Shimpei

2016-07-01

Suicide is a major health issue worldwide, including in Japan. Japanese public health nurses (PHNs) play a distinctive role in suicide prevention, although few studies have delineated this role. The purpose of this study was to develop a conceptual framework that elucidates PHNs' activities for suicide prevention. Semi-structured interviews were conducted in 2012-2013 with 15 PHNs who worked in Tokyo metropolitan regions. Data were analyzed qualitatively using grounded theory, and a conceptual framework with seven categories was developed. Three phases that depict the PHNs' suicide prevention activities emerged. Phase I, Pursuing to understand suicide cases, included two categories: tracing back individual suicide cases and raising consciousness among the general public. Phase II, Spreading a web of care, included three categories: knitting a caring network, weaving regular programs into the web, and continuing to be a member of the web. Phase III, Maintaining motivation and commitment, included two categories: legitimatizing suicide prevention and cultivating continued commitment in the community. The activities of suicide prevention by PHNs included a process of developing a caring network that lead to the enhancement of the caring capacity of the community as a whole. © 2016 Wiley Periodicals, Inc.

The LINKS motif zippers trans-acyltransferase polyketide synthase assembly lines into a biosynthetic megacomplex.

PubMed

Gay, Darren C; Wagner, Drew T; Meinke, Jessica L; Zogzas, Charles E; Gay, Glen R; Keatinge-Clay, Adrian T

2016-03-01

Polyketides such as the clinically-valuable antibacterial agent mupirocin are constructed by architecturally-sophisticated assembly lines known as trans-acyltransferase polyketide synthases. Organelle-sized megacomplexes composed of several copies of trans-acyltransferase polyketide synthase assembly lines have been observed by others through transmission electron microscopy to be located at the Bacillus subtilis plasma membrane, where the synthesis and export of the antibacterial polyketide bacillaene takes place. In this work we analyze ten crystal structures of trans-acyltransferase polyketide synthases ketosynthase domains, seven of which are reported here for the first time, to characterize a motif capable of zippering assembly lines into a megacomplex. While each of the three-helix LINKS (Laterally-INteracting Ketosynthase Sequence) motifs is observed to similarly dock with a spatially-reversed copy of itself through hydrophobic and ionic interactions, the amino acid sequences of this motif are not conserved. Such a code is appropriate for mediating homotypic contacts between assembly lines to ensure the ordered self-assembly of a noncovalent, yet tightly-knit, enzymatic network. LINKS-mediated lateral interactions would also have the effect of bolstering the vertical association of the polypeptides that comprise a polyketide synthase assembly line. Copyright © 2015 Elsevier Inc. All rights reserved.

The LINKS motif zippers trans-acyltransferase polyketide synthase assembly lines into a biosynthetic megacomplex

PubMed Central

Gay, Darren C.; Wagner, Drew T.; Meinke, Jessica L.; Zogzas, Charles E.; Gay, Glen R.; Keatinge-Clay, Adrian T.

2016-01-01

Polyketides such as the clinically-valuable antibacterial agent mupirocin are constructed by architecturally-sophisticated assembly lines known as trans-acyltransferase polyketide synthases. Organelle-sized megacomplexes composed of several copies of trans-acyltransferase polyketide synthase assembly lines have been observed by others through transmission electron microscopy to be located at the Bacillus subtilis plasma membrane, where the synthesis and export of the antibacterial polyketide bacillaene takes place. In this work we analyze ten crystal structures of trans-acyltransferase polyketide synthases ketosynthase domains, seven of which are reported here for the first time, to characterize a motif capable of zippering assembly lines into a megacomplex. While each of the three-helix LINKS (Laterally-INteracting Ketosynthase Sequence) motifs is observed to similarly dock with a spatially-reversed copy of itself through hydrophobic and ionic interactions, the amino acid sequences of this motif are not conserved. Such a code is appropriate for mediating homotypic contacts between assembly lines to ensure the ordered self-assembly of a noncovalent, yet tightly-knit, enzymatic network. LINKS-mediated lateral interactions would also have the effect of bolstering the vertical association of the polypeptides that comprise a polyketide synthase assembly line. PMID:26724270

Developing an Acoustic Sensing Yarn for Health Surveillance in a Military Setting

PubMed Central

Dias, Tilak

2018-01-01

Overexposure to high levels of noise can cause permanent hearing disorders, which have a significant adverse effect on the quality of life of those affected. Injury due to noise can affect people in a variety of careers including construction workers, factory workers, and members of the armed forces. By monitoring the noise exposure of workers, overexposure can be avoided and suitable protective equipment can be provided. This work focused on the creation of a noise dosimeter suitable for use by members of the armed forces, where a discrete dosimeter was integrated into a textile helmet cover. In this way the sensing elements could be incorporated very close to the ears, providing a highly representative indication of the sound level entering the body, and also creating a device that would not interfere with military activities. This was achieved by utilising commercial microelectromechanical system microphones integrated within the fibres of yarn to create an acoustic sensing yarn. The acoustic sensing yarns were fully characterised over a range of relevant sound levels and frequencies at each stage in the yarn production process. The yarns were ultimately integrated into a knitted helmet cover to create a functional acoustic sensing helmet cover prototype. PMID:29772756

Interpreting the formation of bloodstains on selected apparel fabrics.

PubMed

de Castro, Therese; Nickson, Tania; Carr, Debra; Knock, Clare

2013-01-01

Bloodstain pattern analysis (BPA) is the investigation and interpretation of blood deposited at crime scenes. However, the interaction of blood and apparel fabrics has not been widely studied. In this work, the development of bloodstains (passive, absorbed and transferred) dropped from three different heights (500, 1,000, 1,500 mm) on two cotton apparel fabrics (1 × 1 rib knit, drill) was investigated. High-speed video was used to investigate the interaction of the blood and fabric at impact. The effect of drop height on the development of passive, absorbed and transferred bloodstains was investigated using image analysis and statistical tools. Visually, the passive bloodstain patterns produced on the technical face of fabrics from the different drop heights were similar. The blood soaked unequally through to the technical rear of both fabrics. Very little blood was transferred between a bloody fabric and a second piece of fabric. Statistically, drop height did not affect the size of the parent bloodstain (wet or dry), but did affect the number of satellite bloodstains formed. Some differences between the two fabrics were noted, therefore fabric structure and properties must be considered when conducting BPA on apparel fabrics.

Heat sealable, flame and abrasion resistant coated fabric

NASA Technical Reports Server (NTRS)

Tschirch, R. P.; Sidman, K. R. (Inventor)

1983-01-01

Flame retardant, abrasion resistant elastomeric compositions are disclosed which are comprised of thermoplastic polyurethane polymer and flame retarding amounts of a filler selected from decabromodiphenyloxide and antimony oxide in a 3:1 weight ratio, and decabromodiphenyloxide, antimony oxide, and ammonium polyphosphate in a 3:1:3 weight ratio respectively. Heat sealable coated fabrics employing such elastomeric compositions as coating film are produced by dissolving the elastomeric composition to form a solution, casting the solution onto a release paper and drying it to form an elastomeric film. The film is then bonded to a woven, knitted, or felted fabric.

Evaluating the effect of spinning systems on thermal comfort properties of modal fabrics

NASA Astrophysics Data System (ADS)

Seçil Aydın, İ.; Kertmen, M.; Marmarali, A.

2017-10-01

In recent years the importance of clothing comfort became one of the most important feature of the fabrics. The aim of this study is to characterize thermal comfort properties of single jersey fabrics were knitted using 100% modal yarns which were spun in various types of yarn spinning methods such as ring spinning, compact spinning, rotor spinning and airjet spinning. Thermal comfort properties like air permeability, thermal resistance, thermal absorptivity and water vapour permeability of fabrics were tested. The results indicate that compact spinning technology will be appropriate for the summer climate casual wear.

Some studies to prevent the production of some types of moire effects in fabrics

NASA Astrophysics Data System (ADS)

Serrano, Alfonso; Ponce, Rodrigo; Serroukh, Ibrahim

2004-09-01

The symmetry concerning the fabric pattern is not always suitable for the quality that we expected from fabric textile. The moire effects produced by a periodic structure may be caused by various and diverse factors as folds, lines, etc. The defect that we are concern is bright and dark fringes appearing in the Nylon Fabric are viewed with necked eye, from a particular angle using white light. To prevent these annoying effects, one should be focusing the research basically on geometrical fabric structure, physical, optical and dyeing. We start this work by an exhaustive study made to obtain enough information in order to identify and analyze the problem in order to identify, explain and prevent it appearance. To realize that we may define the factors that causes the phenomena. Concerning the experimental results, we begin with a conventional experiment called "Flat table examination" using Fluorescent white light bulb as types of illumination. We have used as well a microscope examination. It is useful to inspect the fiber and yarns which may have different characteristics of size and form. The light interaction with the fiber will produce especially kind of reflection and absorption. We finish the work by designing and developing an optical system able not only for detecting those kinds of fringes. As well to allow some defects inspection. We believe that some measurements are necessary during some process of fabrication (dyeing, spinning and knitting), at least to reduce this types of defects.

Openness to experience, work experience and patient safety.

PubMed

Chang, Hao-Yuan; Friesner, Daniel; Lee, I-Chen; Chu, Tsung-Lan; Chen, Hui-Ling; Wu, Wan-Er; Teng, Ching-I

2016-11-01

The purpose of this study is to examine how the interaction between nurse openness and work experience is related to patient safety. No study has yet examined the interactions between these, and how openness and work experience jointly impact patient safety. This study adopts a cross-sectional design, using self-reported work experience, perceived time pressure and measures of patient safety, and was conducted in a major medical centre. The sample consisted of 421 full-time nurses from all available units in the centre. Proportionate random sampling was used. Patient safety was measured using the self-reported frequency of common adverse events. Openness was self-rated using items identified in the relevant literature. Nurse openness is positively related to the patient safety construct (B = 0.08, P = 0.03). Moreover, work experience reduces the relation between openness and patient safety (B = -0.12, P < 0.01). The relationship between openness, work experience and patient safety suggests a new means of improving patient care in a health system setting. Nurse managers may enhance patient safety by assessing nurse openness and assigning highly open nurses to duties that make maximum use of that trait. © 2016 John Wiley & Sons Ltd.

Grassroots inter-professional networks: the case of organizing care for older cancer patients.

PubMed

Bagayogo, Fatou Farima; Lepage, Annick; Denis, Jean-Louis; Lamothe, Lise; Lapointe, Liette; Vedel, Isabelle

2016-09-19

Purpose The purpose of this paper of inter-professional networks is to analyze the evolution of relationships between professional groups enacting new forms of collaboration to address clinical imperatives. Design/methodology/approach This paper uses a case study based on semi-structured interviews with physicians and nurses, document analysis and informal discussions. Findings This study documents how two inter-professional networks were developed through professional agency. The findings show that the means by which networks are developed influence the form of collaboration therein. One of the networks developed from day-to-day, immediately relevant, exchange, for patient care. The other one developed from more formal and infrequent research and training exchanges that were seen as less decisive in facilitating patient care. The latter resulted in a loosely knit network based on a small number of ad hoc referrals while the other resulted in a tightly knit network based on frequent referrals and advice seeking. Practical implications Developing inter-professional networks likely require a sustained phase of interpersonal contacts characterized by persuasion, knowledge sharing, skill demonstration and trust building from less powerful professional groups to obtain buy-in from more powerful professional groups. The nature of the collaboration in any resulting network depends largely on the nature of these initial contacts. Originality/value The literature on inter-professional healthcare networks focusses on mandated networks such as NHS managed care networks. There is a lack of research on inter-professional networks that emerged from the bottom up at the initiative of healthcare professionals in response to clinical imperatives. This study looks at some forms of collaboration that these "grass-root" initiatives engender and how they are consolidated.

Long-term follow-up of saphenous vein, internal jugular vein, and knitted Dacron patches for carotid artery endarterectomy.

PubMed

Jacobowitz, G R; Kalish, J A; Lee, A M; Adelman, M A; Riles, T S; Landis, R

2001-05-01

To determine whether choice of material used for patch closure following carotid artery endarterectomy (CAE) influences rates of early or late restenosis, stroke, and death, 274 consecutive CAEs were retrospectively reviewed. Saphenous vein (SV) was used in 159 (58.0%) procedures; everted, double-thickness jugular vein (JV) was used in 25 (9.1%); and knitted Dacron (KD) was used in 90 (32.9%). Primary closure was not used in this series. There were four perioperative strokes: two (1.3%) in SV, one (4%) in JV, and one (1.1%) in KD (NS). Follow-up was obtained on 263 (96%) operated arteries (mean 41.5 months). Duplex scan results were available for 236 (89.7%) of these arteries (mean follow-up time 33.7 months). There were three (2%) late strokes in SV and two (2.2%) in KD (NS). In long-term follow-up, one patient (0.7%) in SV and two (2.4%) in KD developed > 80% stenosis (NS). One patient (0.7%) in SV, one (5.3%) in JV, and one (1.2%) in KD had total occlusion of the operated vessel (NS). Three procedures (2.2%) in SV, 1 (5.3%) in JV, and 7 (8.5%) in KD demonstrated moderate stenosis (50-79%) (NS). Three-year follow-up shows that choice of patch material does not affect early or late stroke rate, stroke-related death rate, rate of high-grade (> 80%) restenosis, or rate of total occlusion. There is a higher incidence of moderate stenosis in KD. Although our results and a review of the literature do not indicate that these patients are at increased risk for symptoms or progression of stenosis, they should be followed by duplex scanning to ensure that this is the case.

Effect of fibroin sponge coating on in vivo performance of knitted silk small diameter vascular grafts

PubMed Central

Fukayama, Toshiharu; Ozai, Yusuke; Shimokawadoko, Haruka; Aytemiz, Derya; Tanaka, Ryou; Machida, Noboru; Asakura, Tetsuo

2015-01-01

ABSTRACT Vascular grafts under 5 mm or less in diameter are not developed due to a problem caused by early thrombus formation, neointimal hyperplasia, etc. Bombyx mori silk fibroin (SF) which has biodegradability and tissue infiltration is focused as tube and coating material of vascular grafts. Coating is an important factor to maintain the strength of the anastomotic region of vascular grafts, and to prevent the blood leak from the vascular grafts after implantation. Therefore, in this research, we focused on the SF concentration of the coating solution, and tissue infiltration and remodeling were compared among each SF concentration. Silk poly (-ethylene) glycol diglycidyl ether (PGDE) coating with concentrations of 1.0%, 2.5%, 5.0%, and 7.5% SF were applied for the double-raschel knitted small-sized vessel with 1.5 mm diameter and 1cm in length. The grafts were implanted in the rat abdominal aorta and removed after 3 weeks or 3 months. Vascular grafts patency was monitored by ultrasound, and morphological evaluation was performed by histopathological examination. SF concentration had no significant effects on the patency rate. However, tissue infiltration was significantly higher in the sample of 2.5% SF in 3 weeks, and 1.0% and 2.5% SF in 3 months. Also, in comparison of length inside of the graft, stenosis were not found in 3 weeks, however, found with 5.0% and 7.5% in 3 months. From these results, it is clear that 2.5% SF coating is the most suitable concentration, based on the characteristics of less stenosis, early tissue infiltration, and less neointimal hyperplasia. PMID:26496652

Peer work in Open Dialogue: A discussion paper.

PubMed

Bellingham, Brett; Buus, Niels; McCloughen, Andrea; Dawson, Lisa; Schweizer, Richard; Mikes-Liu, Kristof; Peetz, Amy; Boydell, Katherine; River, Jo

2018-03-25

Open Dialogue is a resource-oriented approach to mental health care that originated in Finland. As Open Dialogue has been adopted across diverse international healthcare settings, it has been adapted according to contextual factors. One important development in Open Dialogue has been the incorporation of paid, formal peer work. Peer work draws on the knowledge and wisdom gained through lived experience of distress and hardship to establish mutual, reciprocal, and supportive relationships with service users. As Open Dialogue is now being implemented across mental health services in Australia, stakeholders are beginning to consider the role that peer workers might have in this model of care. Open Dialogue was not, initially, conceived to include a specific role for peers, and there is little available literature, and even less empirical research, in this area. This discussion paper aims to surface some of the current debates and ideas about peer work in Open Dialogue. Examples and models of peer work in Open Dialogue are examined, and the potential benefits and challenges of adopting this approach in health services are discussed. Peer work in Open Dialogue could potentially foster democracy and disrupt clinical hierarchies, but could also move peer work from reciprocal to a less symmetrical relationship of 'giver' and 'receiver' of care. Other models of care, such as lived experience practitioners in Open Dialogue, can be conceived. However, it remains uncertain whether the hierarchical structures in healthcare and current models of funding would support any such models. © 2018 Australian College of Mental Health Nurses Inc.

Lessons Learned for Online Health Community Moderator Roles: A Mixed-Methods Study of Moderators Resigning From WebMD Communities

PubMed Central

Marmor, Rebecca; Jiang, Xiaoqian

2016-01-01

Background Online health community (OHC) moderators help facilitate conversations and provide information to members. However, the necessity of the moderator in helping members achieve goals by providing the support they need remains unclear, with some prior research suggesting that moderation is unnecessary or even harmful for close-knit OHCs. Similarly, members’ perceptions of moderator roles are underexplored. Starting January of 2013, WebMD moderators stopped working for WebMD communities. This event provided an opportunity for us to study the perceived role of moderators in OHCs. Objective We examine the OHC members’ perception on OHC moderators by studying their reactions toward the departure of moderators in their communities. We also analyzed the relative posting activity on OHCs before and after the departure of moderators from the communities among all members and those who discussed moderators’ departures. Methods We applied a mixed-methods approach to study the posts of all 55 moderated WebMD communities by querying the terms relating to discussions surrounding moderators’ disappearance from the WebMD community. We performed open and axial coding and affinity diagramming to thematically analyze patients’ reactions to the disappeared moderators. The number of posts and poster groups (members and moderators) were analyzed over time to understand posting patterns around moderators’ departure. Results Of 821 posts retrieved under 95 threads, a total of 166 open codes were generated. The codes were then grouped into 2 main themes with 6 total subthemes. First, patients attempted to understand why moderators had left and what could be done to fill the void left by the missing moderators. During these discussions, the posts revealed that patients believed that moderators played critical roles in the communities by making the communities vibrant and healthy, finding solutions, and giving medical information. Some patients felt personally attached with moderators, expressing they would cease their community participation. On the other hand, patients also indicated that moderators were not useful or sometimes even harmful for peer interactions. The overall communities’ posting activity, which was already in decline, showed no significant difference before and after the moderators’ departure. In fact, the overall posting activities of the communities were declining well before the moderators’ departure. These declining posting activities might be the reason why WebMD removed the moderators. Conclusion Compassionate moderators who provide medical expertise, control destructive member posts, and help answer questions can provide important support for patient engagement in OHCs. Moderators are in general received positively by community members and do not appear to interfere with peer interactions. Members are well aware of the possibility of misinformation spreading in OHCs. Further investigation into the attitudes of less vocal community members should be conducted. PMID:27608721

Methodology of selecting dozers for lignite open pit mines in Serbia

DOE Office of Scientific and Technical Information (OSTI.GOV)

Stojanovic, D.; Ignjatovic, D.; Kovacevic, S.

1996-12-31

Apart from the main production processes (coal and overburden mining, rail conveyors transportation and storage of excavated masses) performed by great-capacity mechanization at open pit mines, numerous and different auxiliary works, that often have crucial influence on both the work efficiency of main equipment and the maintenance of optimum technical conditions of machines and plants covering technological system of open pit, are present. Successful realization of work indispensably requires a proper and adequate selection of auxiliary machines according to their type quantity, capacity, power etc. thus highly respecting specific conditions existing at each and every open pit mine. A dozermore » is certainly the most important and representative auxiliary machine at single open pit mine. It is widely used in numerous works that, in fact, are preconditions for successful work of the main mechanization and consequently the very selection of a dozer ranges among the most important operations when selecting mechanization. This paper presents the methodology of dozers selection when lignite open pit mines are concerned. A mathematical model defining the volume of work required for dozers to perform at open pit mines and consequently the number of necessary dozers was designed. The model underwent testing in practice at big open pit mines and can be used in design of future open pits mines.« less

Mental Health and Sociocultural Determinants in an Asian Indian Community

PubMed Central

Roberts, Lisa R.; Mann, Semran K.; Montgomery, Susanne B.

2015-01-01

In a US population of adult male and female Sikh immigrant participants (N = 350), we explored sociocultural factors related to depression, giving participants a choice between English or Punjabi surveys. Language preference pointed to a subgroup with higher levels of depression and lower satisfaction with life. Underreporting of depression suggests a general reluctance to discuss depression. While multiple sociocultural variables were associated with depression bivariably, multivariate analysis identified negative religious coping and anxiety as unique predictors of depression. Community interventions should tap into the protective close-knit social fabric of this community as an opportunity to change the stigma of mental health. PMID:26605953

Textile Technologies and Tissue Engineering: A Path Towards Organ Weaving

PubMed Central

Akbari, Mohsen; Tamayol, Ali; Bagherifard, Sara; Serex, Ludovic; Mostafalu, Pooria; Faramarzi, Negar; Mohammadi, Mohammad Hossein

2016-01-01

Textile technologies have recently attracted great attention as potential biofabrication tools for engineering tissue constructs. Using current textile technologies, fibrous structures can be designed and engineered to attain the required properties that are demanded by different tissue engineering applications. Several key parameters such as physiochemical characteristics of fibers, pore size and mechanical properties of the fabrics play important role in the effective use of textile technologies in tissue engineering. This review summarizes the current advances in the manufacturing of biofunctional fibers. Different textile methods such as knitting, weaving, and braiding are discussed and their current applications in tissue engineering are highlighted. PMID:26924450

The Network of Global Corporate Control

PubMed Central

Vitali, Stefania; Glattfelder, James B.; Battiston, Stefano

2011-01-01

The structure of the control network of transnational corporations affects global market competition and financial stability. So far, only small national samples were studied and there was no appropriate methodology to assess control globally. We present the first investigation of the architecture of the international ownership network, along with the computation of the control held by each global player. We find that transnational corporations form a giant bow-tie structure and that a large portion of control flows to a small tightly-knit core of financial institutions. This core can be seen as an economic “super-entity” that raises new important issues both for researchers and policy makers. PMID:22046252

Mental Health and Sociocultural Determinants in an Asian Indian Community.

PubMed

Roberts, Lisa R; Mann, Semran K; Montgomery, Susanne B

2016-01-01

In a US population of adult male and female Sikh immigrant participants (N = 350), we explored sociocultural factors related to depression, giving participants a choice between English or Punjabi surveys. Language preference pointed to a subgroup with higher levels of depression and lower satisfaction with life. Underreporting of depression suggests a general reluctance to discuss depression. While multiple sociocultural variables were associated with depression bivariably, multivariate analysis identified negative religious coping and anxiety as unique predictors of depression. Community interventions should tap into the protective close-knit social fabric of this community as an opportunity to change the stigma of mental health.

Carbon Fiber Reinforced Carbon Composites Rotary Valves for Internal Combustion Engines

NASA Technical Reports Server (NTRS)

Northam, G. Burton (Inventor); Ransone, Philip O. (Inventor); Rivers, H. Kevin (Inventor)

1999-01-01

Carbon fiber reinforced carbon composite rotary, sleeve, and disc valves for internal combustion engines and the like are disclosed. The valves are formed from knitted or braided or warp-locked carbon fiber shapes. Also disclosed are valves fabricated from woven carbon fibers and from molded carbon matrix material. The valves of the present invention with their very low coefficient of thermal expansion and excellent thermal and self-lubrication properties, do not present the sealing and lubrication problems that have prevented rotary, sleeve, and disc valves from operating efficiently and reliably in the past. Also disclosed are a sealing tang to further improve sealing capabilities and anti-oxidation treatments.

[Graft Pseudoaneurysm after Ascending to Abdominal Aorta Bypass for Atypical Coarctation Due to Aortitis Syndrome;Report of a Case].

PubMed

Yada, Masashi; Yamanaka, Kazuo; Miwa, Senri; Hirose, Keiichi; Sakaguchi, Hisashi; Yoshida, Yukiyo; Onga, Youhei; Tara, Yuichi

2017-05-01

We present a case of a 44-year-old woman, with pseudoaneurysm formation at the middle of the prosthetic graft, 60 mm in diameter. She had been diagnosed with atypical coarctation due to aortitis 27 years before, and had undergone a bypass operation with 14 mm-diameter Cooley double velour graft from the ascending aorta to the abdominal aorta. This time, endovascular aortic repair was performed to prevent rupture of the pseudoaneurysm. Though a knitted Dacron graft has a risk of psuedaneurysm formation long patency could be obtained when used in ascending aorta-abdominal aorta bypass.

Flame retardant treatments of PBI fabric.

NASA Technical Reports Server (NTRS)

Temin, S. C.

1972-01-01

Fabrics knitted or woven from polybenzimidazole (PBI) fibers were treated to reduce flammability in oxygen atmospheres, particularly that of 5 psia oxygen. Bromination to approximately 15% weight gain of such fabrics led to markedly lower burning rates; samples brominated to over 80% weight gain were self-extinguishing in 5 psia oxygen. The loss in tensile strength of fabrics due to bromination was negligible although shrinkage was observed. Free fibers showed negligible losses on bromination. Treatment of PBI fabric with organophosphorus compounds also achieved self-extinguishing character in 5 psia oxygen but the enhanced flameproofing was largely lost on leaching. Reaction with POCl3 in pyridine led to a permanent reduction in flammability.

A comparison of the accuracy of the smart sock system to force platform and optical system for measurement of temporal parameters of locomotion

NASA Astrophysics Data System (ADS)

Oks, A.; Katashev, A.; Bernans, E.; Abolins, V.

2017-10-01

The aim of the study was to present a new DAid®Pressure Sock System for feet locomotion monitoring and to verify it’s temporal characteristics by data comparison with the same obtained by two other widely used methods as reference. Designed system is based on sensors which can be knitted directly in the garment or hosiery items. DAid®Pressure Sock System was created for sport and medical applications. Comparison of temporal characteristics of different types of locomotion, obtained using designed system and reference devises, showed good agreement between data.

The Potential of Improving Medical Textile for Cutaneous Diseases

NASA Astrophysics Data System (ADS)

Radu, C. D.; Cerempei, A.; Salariu, M.; Parteni, O.; Ulea, E.; Campagne, Chr

2017-10-01

The paper dwells on the prospect of medical textiles designed to release a drug/active principle to the dermis of patients suffering from cutaneous disease (allergic dermatitis, psoriasis, bacterial/infectious conditions and inflammatory conditions). The paper is an overview of general and experimental data from textile applications. An adequate medical textile may have a cellulosic structure, mainly knitted cotton fabric. In special cases, one may use woven fabric for multilayer drug-releasing systems. As far as controlled release systems are concerned, we carried out a critical comparison between the systems described in literature and our experimental findings as concerns cyclodextrin, hydrogel, film charged with active principles and multilayer system.

Textile sensors for stab and cut detection

NASA Astrophysics Data System (ADS)

Graßmann, C.; Obermann, M.; Lempa, E.; Bache, T.; Siegel, P. K.; Freyer, T.; Paschko, S.; Beyer, T.; Kirsche, M.; Schwarz-Pfeiffer, A.

2017-10-01

Manufacturers are aiming for more flexible and lightweight protective clothing to increase wearing comfort. A cardigan with a knitted stab-resistant inlay and an alarm system is presented. The stab-resistant inlay is based on a multilayer ultra-high molecular weight poly ethylene (UHMW-PE) fabric. Stab resistance was evaluated according to the standard of the Association of Test Laboratories for Bullet, Stab or Pike Resistant Materials and Construction Standard (VPAM 2011). Furthermore sensors for the detection of cuts and pressure were integrated. Both sensors can trigger alarms if the wearer is attacked. Normal pressure occurring through leaning on a wall or sitting is filtered out and does not trigger an alarm.

The hub of a wheel: a neighborhood support network.

PubMed

Rosel, N

1983-01-01

In a neighborhood where elderly residents have known each other for years, a closely-knit network of mutual assistance and support has developed among a few of the oldest residents. The network and its functions are described in detail, and two features are discussed as being unusual. First, the "old old" people help each other on a daily basis, and second, the routine nature of the assistance is taken for granted by all concerned, except for the author, who observed the evolution of this network over a period of several years. The network's theoretical implications for social integration and its practical implications for the maintenance of independent living are summarized.

A preliminary evaluation of the potential of Beauveria bassiana for bed bug control.

PubMed

Barbarin, Alexis M; Jenkins, Nina E; Rajotte, Edwin G; Thomas, Matthew B

2012-09-15

Residual biopesticide treatments of Beauveria bassiana were tested against the bed bug Cimex lectularius. An oil formulation of conidia was applied to different substrates. Bed bugs were exposed for 1 h, transferred to an unsprayed environment and monitored for mortality. Separate bioassays evaluated the effect of bed bug strain, sex, life stage, and exposure substrate on mortality. Rapid mortality was observed in all bioassays, with bed bugs exposed to treated jersey knit cotton dying most rapidly. A further assay demonstrated efficient autodissemination of conidia from exposed bed bugs to unexposed bed bugs within artificial harborages. Copyright © 2012 Elsevier Inc. All rights reserved.

Contemporary Scientists Discuss the Need for Openness and Open-Mindedness in Science and Society

NASA Astrophysics Data System (ADS)

Mulhall, Pamela J.; Smith, Dorothy V.; Hart, Christina E.; Gunstone, Richard F.

2017-10-01

We report on findings from a qualitative study of Australian scientists whose work brings them into contact with the public. This research sought to understand how a school science curriculum could better represent the work of scientists today. We discuss the views expressed by our participant scientists about the importance of openness and open-mindedness in their work, including their engagement with the public. They described openness as an important characteristic of science. Our participants also see open-mindedness on the part of both scientists and members of the public as important for productive relationships. They see the development of such relationships as an essential facet of their work. The views expressed by these scientists provide a provocative insight into the ways in which contemporary scientists see their work and relationships with their communities. Their perspectives have important implications for approaches to teaching science in schools.

Thermoplastic Composites Reinforced with Textile Grids: Development of a Manufacturing Chain and Experimental Characterisation

NASA Astrophysics Data System (ADS)

Böhm, R.; Hufnagl, E.; Kupfer, R.; Engler, T.; Hausding, J.; Cherif, C.; Hufenbach, W.

2013-12-01

A significant improvement in the properties of plastic components can be achieved by introducing flexible multiaxial textile grids as reinforcement. This reinforcing concept is based on the layerwise bonding of biaxially or multiaxially oriented, completely stretched filaments of high-performance fibers, e.g. glass or carbon, and thermoplastic components, using modified warp knitting techniques. Such pre-consolidated grid-like textiles are particularly suitable for use in injection moulding, since the grid geometry is very robust with respect to flow pressure and temperature on the one hand and possesses an adjustable spacing to enable a complete filling of the mould cavity on the other hand. The development of pre-consolidated textile grids and their further processing into composites form the basis for providing tailored parts with a large number of additional integrated functions like fibrous sensors or electroconductive fibres. Composites reinforced in that way allow new product groups for promising lightweight structures to be opened up in future. The article describes the manufacturing process of this new composite class and their variability regarding reinforcement and function integration. An experimentally based study of the mechanical properties is performed. For this purpose, quasi-static and highly dynamic tensile tests have been carried out as well as impact penetration experiments. The reinforcing potential of the multiaxial grids is demonstrated by means of evaluating drop tower experiments on automotive components. It has been shown that the load-adapted reinforcement enables a significant local or global improvement of the properties of plastic components depending on industrial requirements.

Humor doesn't retire: Improvisation as a health-promoting intervention for older adults.

PubMed

Morse, Lucy A; Xiong, Linda; Ramirez-Zohfeld, Vanessa; Anne, Seltzer; Barish, Becca; Lindquist, Lee A

As our population ages and aging in place continues to remain a priority of older adults, identifying novel ways to promote the wellbeing of older adults and reduce isolation is of the utmost importance. The Second City is a Chicago-based comedy improvisation organization that provides training in improvisation. One of their training courses, Humor Doesn't Retire, specifically teaches adults 55 and over, on improvisation. This study sought to explore the experiences of older adults enrolled in Humor Doesn't Retire, and to characterize any benefits that older adult participants perceived following participation in the comedy improvisation course. Qualitative analysis was used to identify and describe common themes that emerged in a survey of open-ended questions regarding benefits of the improvisation course on outlook and mood as well as behavior changes. Results for perceived benefits showed main themes of increased positivity, an increased sense of comfort and ease with the unexpected, a sense of self-development and self-awareness, and a feeling of acceptance by their social group. Participants reported that these changes fed into their behaviors, and resulted in enhanced problem solving abilities, greater facility in social situations, and the tangible outcome of an expanded and closer-knit social circle. As the first study in our knowledge to examine the effect of improvisation comedy on healthy older adults, this exploratory analysis has suggested that improvisation comedy may be a mechanism by which to combat several geriatric syndromes, including depression, stress, and isolation - all of which are detrimental to older adults. Copyright © 2017 Elsevier B.V. All rights reserved.

The new biology: beyond the Modern Synthesis

PubMed Central

Rose, Michael R; Oakley, Todd H

2007-01-01

Background The last third of the 20th Century featured an accumulation of research findings that severely challenged the assumptions of the "Modern Synthesis" which provided the foundations for most biological research during that century. The foundations of that "Modernist" biology had thus largely crumbled by the start of the 21st Century. This in turn raises the question of foundations for biology in the 21st Century. Conclusion Like the physical sciences in the first half of the 20th Century, biology at the start of the 21st Century is achieving a substantive maturity of theory, experimental tools, and fundamental findings thanks to relatively secure foundations in genomics. Genomics has also forced biologists to connect evolutionary and molecular biology, because these formerly Balkanized disciplines have been brought together as actors on the genomic stage. Biologists are now addressing the evolution of genetic systems using more than the concepts of population biology alone, and the problems of cell biology using more than the tools of biochemistry and molecular biology alone. It is becoming increasingly clear that solutions to such basic problems as aging, sex, development, and genome size potentially involve elements of biological science at every level of organization, from molecule to population. The new biology knits together genomics, bioinformatics, evolutionary genetics, and other such general-purpose tools to supply novel explanations for the paradoxes that undermined Modernist biology. Open Peer Reviewers This article was reviewed by W.F. Doolittle, E.V. Koonin, and J.M. Logsdon. For the full reviews, please go to the Reviewers' Comments section. PMID:18036242

Evaluation of an open-rota system in a Danish psychiatric hospital: a mechanism for improving job satisfaction and work-life balance.

PubMed

Pryce, Joanna; Albertsen, Karen; Nielsen, Karina

2006-05-01

To evaluate the impact of an open-rota scheduling system on the health, work-life balance and job satisfaction of nurses working in a psychiatric ward in Denmark. The effects of shift rotation and scheduling are well known; however, little is known about the wider benefits of open-rota systems. Method A structured questionnaire was distributed to control and intervention groups preintervention and postintervention (20 months). Nurses within the intervention group trialed an open-rota system in which nurses designed their own work-rest schedules. Nurses in the intervention group reported that they were more satisfied with their work hours, less likely to swap their shift when working within the open-rota system and reported significant increases in work-life balance, job satisfaction, social support and community spirit when compared with nurses in the control groups. The ownership and choice over work-rest schedules has benefits for nurses, and potentially the hospital.

The history and development of the Human Genetics Society of Australasia.

PubMed

Sutherland, Grant R

2008-08-01

The Human Genetics Society of Australasia is a vibrant professional society with more than 900 members that promotes and regulates the practice of human and medical genetics in Australia and New Zealand. The growth of human genetics was stimulated by the development of diagnostic clinical cytogenetics laboratories in the early to mid 1960s. This coincided with the recognition by medical specialists, mainly pediatricians, that genetic disorders, especially inborn errors of metabolism and birth defects, were of clinical interest and potentially challenging areas for their skills. The organization of professionals in human genetics was slow to evolve. There was an early Western Australian Human Genetics Society, and the cytogenetics community had begun to meet annually from about 1966 but was coordinated by a mailing list rather than as a formal organization. In 1976, as part of the celebrations of the Centenary Year of the Adelaide Children's Hospital, a clinical genetics meeting involving several high profile international speakers and most of the senior medical geneticists in Australia and New Zealand along with the annual meeting of the loose-knit cytogeneticists group agreed that a small working group be charged with setting up a Human Genetics Society. The society was formally incorporated in South Australia in 1977.

Histologic and biomechanical evaluation of a novel macroporous polytetrafluoroethylene knit mesh compared to lightweight and heavyweight polypropylene mesh in a porcine model of ventral incisional hernia repair

PubMed Central

Melman, L.; Jenkins, E. D.; Hamilton, N. A.; Bender, L. C.; Brodt, M. D.; Deeken, C. R.; Greco, S. C.; Frisella, M. M.

2013-01-01

Purpose To evaluate the biocompatibility of heavyweight polypropylene (HWPP), lightweight polypropylene (LWPP), and monofilament knit polytetrafluoroethylene (mkPTFE) mesh by comparing biomechanics and histologic response at 1, 3, and 5 months in a porcine model of incisional hernia repair. Methods Bilateral full-thickness abdominal wall defects measuring 4 cm in length were created in 27 Yucatan minipigs. Twenty-one days after hernia creation, animals underwent bilateral preperitoneal ventral hernia repair with 8 × 10 cm pieces of mesh. Repairs were randomized to Bard®Mesh (HWPP, Bard/Davol, http://www.davol.com), ULTRAPRO® (LWPP, Ethicon, http://www.ethicon.com), and GORE®INFINIT Mesh (mkPTFE, Gore & Associates, http://www.gore.com). Nine animals were sacrificed at each timepoint (1, 3, and 5 months). At harvest, a 3 × 4 cm sample of mesh and incorporated tissue was taken from the center of the implant site and subjected to uniaxial tensile testing at a rate of 0.42 mm/s. The maximum force (N) and tensile strength (N/cm) were measured with a tensiometer, and stiffness (N/mm) was calculated from the slope of the force-versus-displacement curve. Adjacent sections of tissue were stained with hematoxylin and eosin (H&E) and analyzed for inflammation, fibrosis, and tissue ingrowth. Data are reported as mean ± SEM. Statistical significance (P < 0.05) was determined using a two-way ANOVA and Bonferroni post-test. Results No significant difference in maximum force was detected between meshes at any of the time points (P > 0.05 for all comparisons). However, for each mesh type, the maximum strength at 5 months was significantly lower than that at 1 month (P < 0.05). No significant difference in stiffness was detected between the mesh types or between timepoints (P > 0.05 for all comparisons). No significant differences with regard to inflammation, fibrosis, or tissue ingrowth were detected between mesh types at any time point (P > 0.09 for all comparisons). However, over time, inflammation decreased significantly for all mesh types (P < 0.001) and tissue ingrowth reached a slight peak between 1 and 3 months (P = 0.001) but did not significantly change thereafter (P > 0.09). Conclusions The maximum tensile strength of mesh in the abdominal wall decreased over time for HWPP, LWPP, and mkPTFE mesh materials alike. This trend may actually reflect inability to adequately grip specimens at later time points rather than any mesh-specific trend. Histologically, inflammation decreased with time (P = 0.000), and tissue ingrowth increased (P = 0.019) for all meshes. No specific trends were observed between the polypropylene meshes and the monofilament knit PTFE, suggesting that this novel construction may be a suitable alternative to existing polypropylene meshes. PMID:21279663

Histologic and biomechanical evaluation of a novel macroporous polytetrafluoroethylene knit mesh compared to lightweight and heavyweight polypropylene mesh in a porcine model of ventral incisional hernia repair.

PubMed

Melman, L; Jenkins, E D; Hamilton, N A; Bender, L C; Brodt, M D; Deeken, C R; Greco, S C; Frisella, M M; Matthews, B D

2011-08-01

To evaluate the biocompatibility of heavyweight polypropylene (HWPP), lightweight polypropylene (LWPP), and monofilament knit polytetrafluoroethylene (mkPTFE) mesh by comparing biomechanics and histologic response at 1, 3, and 5 months in a porcine model of incisional hernia repair. Bilateral full-thickness abdominal wall defects measuring 4 cm in length were created in 27 Yucatan minipigs. Twenty-one days after hernia creation, animals underwent bilateral preperitoneal ventral hernia repair with 8 × 10 cm pieces of mesh. Repairs were randomized to Bard(®)Mesh (HWPP, Bard/Davol, http://www.davol.com), ULTRAPRO(®) (LWPP, Ethicon, http://www.ethicon.com), and GORE(®)INFINIT Mesh (mkPTFE, Gore & Associates, http://www.gore.com). Nine animals were sacrificed at each timepoint (1, 3, and 5 months). At harvest, a 3 × 4 cm sample of mesh and incorporated tissue was taken from the center of the implant site and subjected to uniaxial tensile testing at a rate of 0.42 mm/s. The maximum force (N) and tensile strength (N/cm) were measured with a tensiometer, and stiffness (N/mm) was calculated from the slope of the force-versus-displacement curve. Adjacent sections of tissue were stained with hematoxylin and eosin (H&E) and analyzed for inflammation, fibrosis, and tissue ingrowth. Data are reported as mean ± SEM. Statistical significance (P < 0.05) was determined using a two-way ANOVA and Bonferroni post-test. No significant difference in maximum force was detected between meshes at any of the time points (P > 0.05 for all comparisons). However, for each mesh type, the maximum strength at 5 months was significantly lower than that at 1 month (P < 0.05). No significant difference in stiffness was detected between the mesh types or between timepoints (P > 0.05 for all comparisons). No significant differences with regard to inflammation, fibrosis, or tissue ingrowth were detected between mesh types at any time point (P > 0.09 for all comparisons). However, over time, inflammation decreased significantly for all mesh types (P < 0.001) and tissue ingrowth reached a slight peak between 1 and 3 months (P = 0.001) but did not significantly change thereafter (P > 0.09). The maximum tensile strength of mesh in the abdominal wall decreased over time for HWPP, LWPP, and mkPTFE mesh materials alike. This trend may actually reflect inability to adequately grip specimens at later time points rather than any mesh-specific trend. Histologically, inflammation decreased with time (P = 0.000), and tissue ingrowth increased (P = 0.019) for all meshes. No specific trends were observed between the polypropylene meshes and the monofilament knit PTFE, suggesting that this novel construction may be a suitable alternative to existing polypropylene meshes.

The Institute Bibliography 1990: Published and Unpublished Work by Members of the Institute of Educational Technology, 1990 [and] 1991 Supplement.

ERIC Educational Resources Information Center

Whitehead, Don J., Ed.

This annotated bibliography is introduced by a description of the work of the Open University's Institute of Educational Technology (IET), which is concerned with all aspects of the academic work of the Open University and, increasingly, in wider spheres through its consultancy work and program of workshops on open and distance learning. The 1990…

Social Work Education through Open and Distance Learning: An Indian Perspective

ERIC Educational Resources Information Center

Dash, Bishnu Mohan; Botcha, Rambabu

2018-01-01

The paper traces the historical perspectives of open and distance education in India. It also discusses the various modalities and standards followed by various universities in offering social work education through open and distance learning (ODL) mode. It also highlights the achievements and challenges of social work education through ODL mode…

Perception of the Work Environment and Support for Open Education.

ERIC Educational Resources Information Center

King, Dennis R.; And Others

1978-01-01

Forty male and 45 female educators were administered the Work Preference Schedule and the Barth Scale for purposes of determining the relationship between educators' perceptions of work environment and degree of support for open education. Those supporting open education tended not to prefer rules, regulations, and standard operating procedures.…

Behind Linus's Law: Investigating Peer Review Processes in Open Source

ERIC Educational Resources Information Center

Wang, Jing

2013-01-01

Open source software has revolutionized the way people develop software, organize collaborative work, and innovate. The numerous open source software systems that have been created and adopted over the past decade are influential and vital in all aspects of work and daily life. The understanding of open source software development can enhance its…

THE FORMATION OF BONE CALLUS DURING RADIATION SICKNESS (in Russian)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Nazarishvill, G.P.; Vepkhvadze, R.Ya.; Vakhtangashvili, T.A.

1957-01-01

>Six dogs were irradiated with an x-ray dose of 408 r, and the skin bone was thee broken immediately after radiation. The healing process was followed by x rays in the control group of dogs in which a well-developed bone callus could be observed on the 50th day. No sign of the formation of a bone callus at the fracture site could be observed in any of the irradiated dogs. Even on the l02nd day after the fracture a wide slit could be seen on thee x-ray diagram at the point of fracture where the bones had not knit togethermore » in the irradiated dogs. (TTT)« less

Carbon Fiber Reinforced Carbon Composite Rotary Valve for an Internal Combustion Engine

NASA Technical Reports Server (NTRS)

Northam, G.Burton (Inventor); Ransone, Philip O. (Inventor); Rivers, H. Kevin (Inventor)

2000-01-01

Carbon fiber reinforced carbon composite rotary sleeve, and disc valves for internal combustion engines and the like are disclosed. The valves are formed from knitted or braided or wrap-locked carbon fiber shapes. Also disclosed are valves fabricated from woven carbon fibers and from molded carbon matrix material. The valves of the present invention with their very low coefficient of thermal expansion and excellent thermal and self-lubrication properties do not present the sealing and lubrication problems that have prevented rotary sleeve and disc valves from operating efficiently and reliably in the past. Also disclosed are a sealing tang to further improve sealing capabilities and anti-oxidation treatments.

[Research Progress and Development Prospect of Biomedical Plate].

PubMed

Li, Xiao; Liu, Jing; Wu, Qiang; Wang, Yanjie; Xiao, Tao; Liu, Lihong; Yu, Shu

2016-12-01

Different generations of biomedical materials are analyzed in this paper.The current clinical uses of plates made of metals,polymers or composite materials are evaluated,and nano hydroxyapatite/polylactic acid composites and carbon/carbon composite plates are introduced as emphasis.It is pointed out that the carbon/carbon composites are of great feasibility and advantage as a new generation of biomedical materials,especially in the field of bone plate.Compared to other biomaterials,carbon/carbon composites have a good biocompatibility and mechanical compatibility because they have similar elastic modulus,porosity and density to that of human bones.With the development of the technology in knitting and material preparation,carbon/carbon composite plates have a good application prospect.

Lightweight 3.66-meter-diameter conical mesh antenna reflector

NASA Technical Reports Server (NTRS)

Moore, D. M.

1974-01-01

A description is given of a 3.66 m diameter nonfurlable conical mesh antenna incorporating the line source feed principle recently developed. The weight of the mesh reflector and its support structure is 162 N. An area weighted RMS surface deviation of 0.28 mm was obtained. The RF performance measurements show a gain of 48.3 db at 8.448 GHz corresponding to an efficiency of 66%. During the design and development of this antenna, the technology for fabricating the large conical membranes of knitted mesh was developed. As part of this technology a FORTRAN computer program, COMESH, was developed which permits the user to predict the surface accuracy of a stretched conical membrane.

Change in challenging times: a plan for extending and improving health coverage.

PubMed

Lambrew, Jeanne M; Podesta, John D; Shaw, Teresa L

2005-01-01

Some speculate that Americans are neither politically capable of nor morally committed to solving the health system problems. We disagree. We propose a plan that insures all and improves the value and cost-effectiveness of health care by knitting together employer-sponsored insurance and Medicaid; promoting prevention, research, and information technology; and financing its investments through a dedicated value-added tax. By prioritizing practicality, fairness, and responsibility, the plan aims to avoid ideological battles and prevent fear of major change. By emphasizing the moral imperative for change, especially relative to other options on the policy agenda, it aims to create momentum for expanding and improving health coverage for all.

Pakistan: family planning expands in non-governmental organizations.

PubMed

1977-01-01

The Family Planning Association of Pakistan has begun a program of integration of family planning activities with other voluntary welfare agencies. 1 of the more successful projects has been in cooperation with the Family Welfare Cooperative Society of Lahore. Volunteers have provided facilities to very low-income women to help supplement income. At 1st it was knitting, embroidery, and cloth manufacture, but over several years it developed into a complex of several buildings with a comprehensive vocational training center, a showroom, schools for the children of mothers in training, a secretarial school, and a hostel for homeless women there. There is a medical unit, a full-time doctor, and family planning services.

Literature review of tufted reinforcement for composite structures

NASA Astrophysics Data System (ADS)

Gnaba, I.; Legrand, X.; Wang, P.; Soulat, D.

2017-10-01

In order to minimize the damage caused by the 2D structures, several research have been done on more complex structures (3D-preforms) which have more interesting mechanical characteristics. Divers textile technologies are used to manufacture 3D preforms such as weaving, knitting, stitching, z-pinning, tufting… This kind of reinforcement aims to achieve a balance between the in-plane and out-of-plane properties. Recently, the tufting technology shows more opportunities to develop 3D reinforcements especially with the advances in robotics. The present paper focuses not only on the various technologies of reinforcement through the thickness but also on the mechanical behaviour of a tufted preform in a stamping process.

Textile Technologies and Tissue Engineering: A Path Toward Organ Weaving.

PubMed

Akbari, Mohsen; Tamayol, Ali; Bagherifard, Sara; Serex, Ludovic; Mostafalu, Pooria; Faramarzi, Negar; Mohammadi, Mohammad Hossein; Khademhosseini, Ali

2016-04-06

Textile technologies have recently attracted great attention as potential biofabrication tools for engineering tissue constructs. Using current textile technologies, fibrous structures can be designed and engineered to attain the required properties that are demanded by different tissue engineering applications. Several key parameters such as physiochemical characteristics of fibers, microarchitecture, and mechanical properties of the fabrics play important roles in the effective use of textile technologies in tissue engineering. This review summarizes the current advances in the manufacturing of biofunctional fibers. Different textile methods such as knitting, weaving, and braiding are discussed and their current applications in tissue engineering are highlighted. © 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Thermal comfort of aeroplane seats: influence of different seat materials and the use of laboratory test methods.

PubMed

Bartels, Volkmar T

2003-07-01

This study determined the influence of different cover and cushion materials on the thermal comfort of aeroplane seats. Different materials as well as ready made seats were investigated by the physiological laboratory test methods Skin Model and seat comfort tester. Additionally, seat trials with human test subjects were performed in a climatic chamber. Results show that a fabric cover produces a considerably higher sweat transport than leather. A three-dimensional knitted spacer fabric turns out to be the better cushion alternative in comparison to a moulded foam pad. Results from the physiological laboratory test methods nicely correspond to the seat trials with human test subjects.

The Release of a Captive-Raised Female African Elephant (Loxodonta africana) in the Okavango Delta, Botswana

PubMed Central

Evans, Kate; Moore, Randall J.; Harris, Stephen

2013-01-01

Simple Summary Managing captive elephants poses a significant challenge because of their complex social behaviour. While wild female elephants live in close-knit family groups of related individuals, captive herds often consist of unrelated animals. Some of the elephants in captive groups may be excluded by their companions and experience increased aggression, so that their welfare is compromised. There is no easy solution to this problem and novel approaches are required since slaughter of captive elephants is not publicly acceptable. We show that captive-raised female elephants can be released into the wild, survive and reproduce, and suggest that this management option should be explored further for female elephants currently held under various captive conditions. Abstract Wild female elephants live in close-knit matrilineal groups and housing captive elephants in artificial social groupings can cause significant welfare issues for individuals not accepted by other group members. We document the release of a captive-raised female elephant used in the safari industry because of welfare and management problems. She was fitted with a satellite collar, and spatial and behavioural data were collected over a 17-month period to quantify her interactions with the wild population. She was then monitored infrequently for a further five-and-a-half years. We observed few signs of aggression towards her from the wild elephants with which she socialized. She used an area of comparable size to wild female elephants, and this continued to increase as she explored new areas. Although she did not fully integrate into a wild herd, she had three calves of her own, and formed a social unit with another female and her calf that were later released from the same captive herd. We recommend that release to the wild be considered as a management option for other captive female elephants. PMID:26487408

Comparison of a lightweight polypropylene mesh (Optilene® LP) and a large-pore knitted PTFE mesh (GORE® INFINIT® mesh)--Biocompatibility in a standardized endoscopic extraperitoneal hernia model.

PubMed

Jacob, Dietmar A; Schug-Pass, Christine; Sommerer, Florian; Tannapfel, Andrea; Lippert, Hans; Köckerling, Ferdinand

2012-02-01

The use of a mesh with good biocompatibility properties is of decisive importance for the avoidance of recurrences and chronic pain in endoscopic hernia repair surgery. As we know from numerous experiments and clinical experience, large-pore, lightweight polypropylene meshes possess the best biocompatibility. However, large-pore meshes of different polymers may be used as well and might be an alternative solution. Utilizing a totally extraperitoneal technique in an established animal model, 20 domestic pigs were implanted with either a lightweight large-pore polypropylene (PP) mesh (Optilene® LP) or a medium-weight large-pore knitted polytetrafluorethylene (PTFE) mesh (GORE® INFINIT® mesh). After 94 days, the pigs were sacrificed and postmortem diagnostic laparoscopy was performed, followed by explantation of the specimens for macroscopic, histological and immunohistochemical evaluation. The mean mesh shrinkage rate was 14.2% for Optilene® LP vs. 24.7% for INFINIT® mesh (p = 0.017). The partial volume of the inflammatory cells was 11.2% for Optilene® LP vs. 13.9% for INFINIT (n.s.). CD68 was significantly higher for INFINIT (11.8% vs. 5.6%, p = 0.007). The markers of cell turnover, namely Ki67 and the apoptotic index, were comparable at 6.4% vs. 12.4% (n.s.) and 1.6% vs. 2.0% (n.s.). In the extracellular matrix, TGF-β was 35.4% for Optilene® LP and 31.0% for INFINIT® (n.s.). Collagen I (pos/300 μm) deposits were 117.8 and 114.9, respectively. In our experimental examinations, Optilene® LP and INFINIT® showed a comparable biocompatibility in terms of chronic inflammatory reaction; however, the shrinkage rate was significantly higher for INFINIT® after 3 months. The higher shrinkage rate of INFINIT® should be taken into account when choosing the mesh size for an adequate hernia overlap.

10. Interior view of open work station area looking from ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

10. Interior view of open work station area looking from southwest corner of space; showing opened doorway to office with exterior window; center of north wing; view to northeast. - Ellsworth Air Force Base, Administration Office, 2704 George Drive, Blackhawk, Meade County, SD

Efficiency analysis of semi-open sorption heat pump systems

DOE PAGES

Gluesenkamp, Kyle R.; Chugh, Devesh; Abdelaziz, Omar; ...

2016-08-10

Sorption systems traditionally fall into two categories: closed (heat pumps and chillers) and open (dehumidification). Recent work has explored the possibility of semi-open systems, which can perform heat pumping or chilling while utilizing ambient humidity as the working fluid of the cycle, and are still capable of being driven by solar, waste, or combustion heat sources. The efficiencies of closed and open systems are well characterized, and can typically be determined from four temperature s. In this work, the performance potential of semi-open systems is explored by adapting expressions for the efficiency of closed and open systems to the novelmore » semi-open systems. A key new parameter is introduced, which involves five temperatures, since both the ambient dry bulb and ambient dew point are used. Furthermore, this additional temperature is necessary to capture the open absorber performance in terms of both the absorption of humidity and sensible heat transfer with surrounding air.« less

Efficiency analysis of semi-open sorption heat pump systems

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gluesenkamp, Kyle R.; Chugh, Devesh; Abdelaziz, Omar

Sorption systems traditionally fall into two categories: closed (heat pumps and chillers) and open (dehumidification). Recent work has explored the possibility of semi-open systems, which can perform heat pumping or chilling while utilizing ambient humidity as the working fluid of the cycle, and are still capable of being driven by solar, waste, or combustion heat sources. The efficiencies of closed and open systems are well characterized, and can typically be determined from four temperature s. In this work, the performance potential of semi-open systems is explored by adapting expressions for the efficiency of closed and open systems to the novelmore » semi-open systems. A key new parameter is introduced, which involves five temperatures, since both the ambient dry bulb and ambient dew point are used. Furthermore, this additional temperature is necessary to capture the open absorber performance in terms of both the absorption of humidity and sensible heat transfer with surrounding air.« less

77 FR 26743 - The Manufacturing Council: Work Session of the Manufacturing Council

Federal Register 2010, 2011, 2012, 2013, 2014

2012-05-07

... DEPARTMENT OF COMMERCE International Trade Administration The Manufacturing Council: Work Session.... ACTION: Notice of an Open Work Session. SUMMARY: This notice sets forth the schedule and agenda for an open work session of the Manufacturing Council (Council). The agenda may change to accommodate Council...

Automatic identification of gait events using an instrumented sock

PubMed Central

2011-01-01

Background Textile-based transducers are an emerging technology in which piezo-resistive properties of materials are used to measure an applied strain. By incorporating these sensors into a sock, this technology offers the potential to detect critical events during the stance phase of the gait cycle. This could prove useful in several applications, such as functional electrical stimulation (FES) systems to assist gait. Methods We investigated the output of a knitted resistive strain sensor during walking and sought to determine the degree of similarity between the sensor output and the ankle angle in the sagittal plane. In addition, we investigated whether it would be possible to predict three key gait events, heel strike, heel lift and toe off, with a relatively straight-forward algorithm. This worked by predicting gait events to occur at fixed time offsets from specific peaks in the sensor signal. Results Our results showed that, for all subjects, the sensor output exhibited the same general characteristics as the ankle joint angle. However, there were large between-subjects differences in the degree of similarity between the two curves. Despite this variability, it was possible to accurately predict gait events using a simple algorithm. This algorithm displayed high levels of trial-to-trial repeatability. Conclusions This study demonstrates the potential of using textile-based transducers in future devices that provide active gait assistance. PMID:21619570

Matrix management: not a structure, a frame of mind.

PubMed

Barlett, C A; Ghoshal, S

1990-01-01

In many of the world's leading corporations, strategic thinking has outdistanced organizational capability. As business challenges have grown more complex over the past 20 years, most companies have avoided the trap of one-dimensional strategic responses-stick to your knitting, stick to the big markets. But many of them have fallen into a second, structural trap and adopted elaborate organizational matrices that actually impair their ability to implement sophisticated strategies. Keeping a company light on its feet strategically while still coordinating its activities across divisions, functions, even continents, means eliminating parochialism, improving communications, and weaving the decision-making process into the company's social fabric. Altering formal structure from the top down is a poor way to achieve these goals. It is easier to work from the bottom up, focusing on the attitudes and behavior of individual managers. The companies that have made best use of this focus-among them NEC, Philips, and Unilever-employ three techniques to capture the capabilities and commitment of each manager: 1. They communicate a clear, consistent corporate vision. 2. They use training and career-path management to broaden individual perspectives and increase identification with corporate goals. 3. They co-opt individual energies and ambitions into the broader corporate-wide agenda. The goal is to build a matrix of corporate values and priorities in the minds of managers and let them make the judgments and negotiate the deals that make strategy pay off.

75 FR 22165 - Publication of Open Government Directive

Federal Register 2010, 2011, 2012, 2013, 2014

2010-04-27

... Government Plan by May 27, 2010 to ensure prompt consideration by MSPB's Open Government Working Group. Comments received after May 27, 2010 will also be provided to MSPB's Open Government Working Group... specific actions are: (1) Publication of three high- value data sets; (2) designation of a senior agency...

Open Access

ERIC Educational Resources Information Center

Suber, Peter

2012-01-01

The Internet lets us share perfect copies of our work with a worldwide audience at virtually no cost. We take advantage of this revolutionary opportunity when we make our work "open access": digital, online, free of charge, and free of most copyright and licensing restrictions. Open access is made possible by the Internet and copyright-holder…

Youth masculinities: compelling male heterosexuality.

PubMed

Richardson, Diane

2010-12-01

This article seeks to extend understandings of heterosexual masculine identities through an examination of young men's constructions of what motivates young men to engage in heterosexual practices and relationships, and what not having sex might mean for them. Using the masculinity literature and work on heterosexuality to frame the discussion and to contextualize the findings, it explores the complex dynamics that frame the relationship between masculinity and heterosexuality. Specifically, how dominant or 'hegemonic' discourses of heterosexuality shape young men's identities, beliefs and behaviour. It considers these questions using empirical data from a qualitative study of young people living in close-knit working-class communities in the North East of England, with a specific focus on cultural and social attitudes towards sexuality and sexual practices. Peer group networks are a key site for the construction and (re)production of masculinity and, therefore, an important arena within which gendered social approval and acceptance is both sought and gained. In this article, I explore the reasons why young men engage in specific types of heterosexual practice in order to gain social approval. A central question is the extent to which heterosexuality is compelling for young men. That young men do feel compelled to behave in certain ways sexually, behaviours that they may be uncomfortable with and/or dislike, and the fact that they feel they are restricted in terms of how they can talk about their experiences within their peer group networks, demonstrates the power of dominant discourses of masculinity in everyday life. This is addressed through an examination of the restrictive effects of normative discourses about male heterosexuality, including their privatizing effects, which suggest that youth masculinities are often experienced in ways that are highly contradictory requiring young men to adopt a range of strategies to deal with this.

Flexible Environments for Grand-Challenge Simulation in Climate Science

NASA Astrophysics Data System (ADS)

Pierrehumbert, R.; Tobis, M.; Lin, J.; Dieterich, C.; Caballero, R.

2004-12-01

Current climate models are monolithic codes, generally in Fortran, aimed at high-performance simulation of the modern climate. Though they adequately serve their designated purpose, they present major barriers to application in other problems. Tailoring them to paleoclimate of planetary simulations, for instance, takes months of work. Theoretical studies, where one may want to remove selected processes or break feedback loops, are similarly hindered. Further, current climate models are of little value in education, since the implementation of textbook concepts and equations in the code is obscured by technical detail. The Climate Systems Center at the University of Chicago seeks to overcome these limitations by bringing modern object-oriented design into the business of climate modeling. Our ultimate goal is to produce an end-to-end modeling environment capable of configuring anything from a simple single-column radiative-convective model to a full 3-D coupled climate model using a uniform, flexible interface. Technically, the modeling environment is implemented as a Python-based software component toolkit: key number-crunching procedures are implemented as discrete, compiled-language components 'glued' together and co-ordinated by Python, combining the high performance of compiled languages and the flexibility and extensibility of Python. We are incrementally working towards this final objective following a series of distinct, complementary lines. We will present an overview of these activities, including PyOM, a Python-based finite-difference ocean model allowing run-time selection of different Arakawa grids and physical parameterizations; CliMT, an atmospheric modeling toolkit providing a library of 'legacy' radiative, convective and dynamical modules which can be knitted into dynamical models, and PyCCSM, a version of NCAR's Community Climate System Model in which the coupler and run-control architecture are re-implemented in Python, augmenting its flexibility and adaptability.

Impact of Nutrient Restriction on the Structure of Listeria monocytogenes Biofilm Grown in a Microfluidic System.

PubMed

Cherifi, Tamazight; Jacques, Mario; Quessy, Sylvain; Fravalo, Philippe

2017-01-01

Biofilm formation by the pathogen Listeria monocytogenes is a major concern in food industries. The aim of this work was to elucidate the effect of nutrient limitation on both biofilm architecture and on the viability of the bacteria in microfluidic growth conditions. Biofilm formation by two L. monocytogenes strains was performed in a rich medium (BHI) and in a 10-fold diluted BHI (BHI/10) at 30°C for 24 h by using both static conditions and the microfluidic system Bioflux. In dynamic conditions, biofilms grown in rich and poor medium showed significant differences as well in structure and in the resulting biovolume. In BHI/10, biofilm was organized in a knitted network where cells formed long chains, whereas in the rich medium, the observed structure was homogeneous cellular multilayers. Biofilm biovolume production in BHI/10 was significantly higher than in BHI in these dynamic conditions. Interestingly, biovolume of dead cells in biofilms formed under limited nutrient conditions (BHI/10) was significantly higher than in biofilms formed in the BHI medium. In the other hand, in static conditions, biofilm is organized in a multilayer cells and dispersed cells in a rich medium BHI and poor medium BHI/10 respectively. There was significantly more biomass in the rich medium compared to BHI/10 but no difference was noted in the dead/damaged subpopulation showing how L. monocytogenes biofilm could be affected by the growth conditions. This work demonstrated that nutrient concentration affects biofilm structure and the proportion of dead cells in biofilms under microfluidic condition. Our study also showed that limited nutrients play an important role in the structural stability of L. monocytogenes biofilm by enhancing cell death and liberating extracellular DNA.

Impact of Nutrient Restriction on the Structure of Listeria monocytogenes Biofilm Grown in a Microfluidic System

PubMed Central

Cherifi, Tamazight; Jacques, Mario; Quessy, Sylvain; Fravalo, Philippe

2017-01-01

Biofilm formation by the pathogen Listeria monocytogenes is a major concern in food industries. The aim of this work was to elucidate the effect of nutrient limitation on both biofilm architecture and on the viability of the bacteria in microfluidic growth conditions. Biofilm formation by two L. monocytogenes strains was performed in a rich medium (BHI) and in a 10-fold diluted BHI (BHI/10) at 30°C for 24 h by using both static conditions and the microfluidic system Bioflux. In dynamic conditions, biofilms grown in rich and poor medium showed significant differences as well in structure and in the resulting biovolume. In BHI/10, biofilm was organized in a knitted network where cells formed long chains, whereas in the rich medium, the observed structure was homogeneous cellular multilayers. Biofilm biovolume production in BHI/10 was significantly higher than in BHI in these dynamic conditions. Interestingly, biovolume of dead cells in biofilms formed under limited nutrient conditions (BHI/10) was significantly higher than in biofilms formed in the BHI medium. In the other hand, in static conditions, biofilm is organized in a multilayer cells and dispersed cells in a rich medium BHI and poor medium BHI/10 respectively. There was significantly more biomass in the rich medium compared to BHI/10 but no difference was noted in the dead/damaged subpopulation showing how L. monocytogenes biofilm could be affected by the growth conditions. This work demonstrated that nutrient concentration affects biofilm structure and the proportion of dead cells in biofilms under microfluidic condition. Our study also showed that limited nutrients play an important role in the structural stability of L. monocytogenes biofilm by enhancing cell death and liberating extracellular DNA. PMID:28567031

Linking behavior in the physics education research coauthorship network

NASA Astrophysics Data System (ADS)

Anderson, Katharine A.; Crespi, Matthew; Sayre, Eleanor C.

2017-06-01

There is considerable long-term interest in understanding the dynamics of collaboration networks, and how these networks form and evolve over time. Most of the work done on the dynamics of social networks focuses on well-established communities. Work examining emerging social networks is rarer, simply because data are difficult to obtain in real time. In this paper, we use thirty years of data from an emerging scientific community to look at that crucial early stage in the development of a social network. We show that when the field was very young, islands of individual researchers labored in relative isolation, and the coauthorship network was disconnected. Thirty years later, rather than a cluster of individuals, we find a true collaborative community, bound together by a robust collaboration network. However, this change did not take place gradually—the network remained a loose assortment of isolated individuals until the mid 2000s, when those smaller parts suddenly knit themselves together into a single whole. In the rest of this paper, we consider the role of three factors in these observed structural changes: growth, changes in social norms, and the introduction of institutions such as field-specific conferences and journals. We have data from the very earliest years of the field, a period which includes the introduction of two different institutions: the first field-specific conference, and the first field-specific journals. We also identify two relevant behavioral shifts: a discrete increase in coauthorship coincident with the first conference, and a shift among established authors away from collaborating with outsiders, towards collaborating with each other. The interaction of these factors gives us insight into the formation of collaboration networks more broadly.

Basic Aspects of Deep Soil Mixing Technology Control

NASA Astrophysics Data System (ADS)

Egorova, Alexandra A.; Rybak, Jarosław; Stefaniuk, Damian; Zajączkowski, Przemysław

2017-10-01

Improving a soil is a process of increasing its physical/mechanical properties without changing its natural structure. Improvement of soil subbase is reached by means of the knitted materials, or other methods when strong connection between soil particles is established. The method of DSM (Deep Soil Mixing) columns has been invented in Japan in 1970s. The main reason of designing cement-soil columns is to improve properties of local soils (such as strength and stiffness) by mixing them with various cementing materials. Cement and calcium are the most commonly used binders. However new research undertaken worldwide proves that apart from these materials, also gypsum or fly ashes can also be successfully implemented. As the Deep Soil Mixing is still being under development, anticipating mechanical properties of columns in particular soils and the usage of cementing materials in formed columns is very difficult and often inappropriate to predict. That is why a research is carried out in order to find out what binders and mixing technology should be used. The paper presents several remarks on the testing procedures related to quality and capacity control of Deep Soil Mixing columns. Soil improvement methods, their advantages and limitations are briefly described. The authors analyse the suitability of selected testing methods on subsequent stages of design and execution of special foundations works. Chosen examples from engineering practice form the basis for recommendations for the control procedures. Presented case studies concerning testing the on capacity field samples and laboratory procedures on various categories of soil-cement samples were picked from R&D and consulting works offered by Wroclaw University of Science and Technology. Special emphasis is paid to climate conditions which may affect the availability of performing and controlling of DSM techniques in polar zones, with a special regard to sample curing.

Embolomycotic Aneurysm of External Iliac Artery

PubMed Central

Terán, Nemesio A.; Gonzalez, Nerio M.; García, Luis; Gonzalez, Freddy E.; Rivera, Humberto E.

1989-01-01

We report a case of embolomycotic aneurysm of the right iliac artery secondary to bacterial endocarditis. The patient, a 33-year-old woman, presented with unilateral hydronephrosis and lower extremity edema caused by aneurysmal compression of the ipsilateral ureter and the external iliac vein. She was treated with ligation and an extraperitoneal left-external-iliac-artery to right-femoral-artery bypass using a knitted Dacron prosthesis. Since her surgery, our patient has been well except for persistence of moderate leg edema. To the best of our knowledge, we are reporting the 1st case of embolomycotic external-iliac-artery aneurysm secondary to bacterial endocarditis and resulting in hydronephrosis and venous insufficiency. (Texas Heart Institute Journal 1989;16:51-55) Images PMID:15227238

Electrostatic Model Applied to ISS Charged Water Droplet Experiment

NASA Technical Reports Server (NTRS)

Stevenson, Daan; Schaub, Hanspeter; Pettit, Donald R.

2015-01-01

The electrostatic force can be used to create novel relative motion between charged bodies if it can be isolated from the stronger gravitational and dissipative forces. Recently, Coulomb orbital motion was demonstrated on the International Space Station by releasing charged water droplets in the vicinity of a charged knitting needle. In this investigation, the Multi-Sphere Method, an electrostatic model developed to study active spacecraft position control by Coulomb charging, is used to simulate the complex orbital motion of the droplets. When atmospheric drag is introduced, the simulated motion closely mimics that seen in the video footage of the experiment. The electrostatic force's inverse dependency on separation distance near the center of the needle lends itself to analytic predictions of the radial motion.

Comparing Biofouling Control Treatments for Use on Aquaculture Nets

PubMed Central

Swain, Geoffrey; Shinjo, Nagahiko

2014-01-01

Test panels comprised of uncoated, copper coated and silicone coated 7/8'' (22 mm) mesh knitted nylon net were evaluated to compare their properties and the effectiveness to prevent biofouling. This paper describes test procedures that were developed to quantify the performance in terms of antifouling, cleanability, drag and cost. The copper treatment was the most effective at controlling fouling, however, the silicone treated nets were the easiest to clean. The drag forces on the net were a function of twine diameter, twine roughness and fouling. After immersion, the uncoated nets had the most drag followed by the silicone and copper treatments. The cost of applying silicone to nets is high; however, improved formulations may provide a non-toxic alternative to control fouling. PMID:25474085

Process analysis of an in store production of knitted clothing

NASA Astrophysics Data System (ADS)

Buecher, D.; Kemper, M.; Schmenk, B.; Gloy, Y.-S.; Gries, T.

2017-10-01

In the textile and clothing industry, global value-added networks are widespread for textile and clothing production. As a result of global networking, the value chain is fragmented and a great deal of effort is required to coordinate the production processes [1]. In addition, the planning effort on the quantity and design of the goods is high and risky. Today the fashion industry is facing an increasing customer demand for individual and customizable products in addition to short delivery times [2]. These challenges are passed down to the textile and clothing industry decreasing batch sizes and production times. Conventional clothing production cannot fulfill those demands especially when combined with more and more individual or customizable designs. Hence new production concepts have to be developed.

Superelastic Orthopedic Implant Coatings

NASA Astrophysics Data System (ADS)

Fournier, Eric; Devaney, Robert; Palmer, Matthew; Kramer, Joshua; El Khaja, Ragheb; Fonte, Matthew

2014-07-01

The demand for hip and knee replacement surgery is substantial and growing. Unfortunately, most joint replacement surgeries will fail within 10-25 years, thereby requiring an arduous, painful, and expensive revision surgery. To address this issue, a novel orthopedic implant coating material ("eXalt") has been developed. eXalt is comprised of super elastic nitinol wire that is knit into a three-dimensional spacer fabric structure. eXalt expands in vivo to conform to the implantation site and is porous to allow for bone ingrowth. The safety and efficacy of eXalt were evaluated through structural analysis, mechanical testing, and a rabbit implantation model. The results demonstrate that eXalt meets or exceeds the performance of current coating technologies with reduced micromotion, improved osseointegration, and stronger implant fixation in vivo.

Looking south at the open hearth steelmaking plant; open hearth ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Looking south at the open hearth steelmaking plant; open hearth stockhouse in foreground and open hearth furnace building in background - U.S. Steel Edgar Thomson Works, Open Hearth Steelmaking Plant, Along Monongahela River, Braddock, Allegheny County, PA

The work experience of undocumented Mexican migrants in Los Angeles.

PubMed

Simon, R J; Deley, M

1984-01-01

This study, based on interviews with Mexican documented and undocumented women workers in Los Angeles county, finds that most of the women in both categories work in factories. Contrary to popular impression, only 10% of the undocumented women in this survey are engaged in private household employment, although 19% were so employed when they 1st came to the US. Despite this obvious change in occupation, in general occupational mobility from 1st jobs is insignificant. On the average, undocumented women's hourly rate of pay was 40 US cents higher than the minimum wage, and US$1.57 lower than the average documented women's wages. Within the same occupational category, the undocumented women earned less per hour. The smallest difference occured in the 'laborer's' category. Another departure from popular impression was that, 76% of undocumented workers were paid by check. The figure was 94% for documented women workers. The respondents who said they were paid in cash were most likely to be in the private household sector. 80% of the undocumented workers did not think that they were discriminated against in their jobs, suggesting that they are a rather timid group of workers who believe that they have no real options regarding their work life, and are relatively satisfied with what they have. Almost all the women said that they came to the US with the intention of staying permanently, or as long as they are not caught and sent back to Mexico, which is their biggest fear. Better job and better pay are the most important reasons given by most women for coming. Being temporarily laid off would not prompt them to return to Mexico, as they are confident that their chances of finding another minimum wage paying job are better in the US. A closek knit network of support usually tides them over during their period of joblessness.

The Privacy and Security Implications of Open Data in Healthcare.

PubMed

Kobayashi, Shinji; Kane, Thomas B; Paton, Chris

2018-04-22

 The International Medical Informatics Association (IMIA) Open Source Working Group (OSWG) initiated a group discussion to discuss current privacy and security issues in the open data movement in the healthcare domain from the perspective of the OSWG membership.  Working group members independently reviewed the recent academic and grey literature and sampled a number of current large-scale open data projects to inform the working group discussion.  This paper presents an overview of open data repositories and a series of short case reports to highlight relevant issues present in the recent literature concerning the adoption of open approaches to sharing healthcare datasets. Important themes that emerged included data standardisation, the inter-connected nature of the open source and open data movements, and how publishing open data can impact on the ethics, security, and privacy of informatics projects.  The open data and open source movements in healthcare share many common philosophies and approaches including developing international collaborations across multiple organisations and domains of expertise. Both movements aim to reduce the costs of advancing scientific research and improving healthcare provision for people around the world by adopting open intellectual property licence agreements and codes of practice. Implications of the increased adoption of open data in healthcare include the need to balance the security and privacy challenges of opening data sources with the potential benefits of open data for improving research and healthcare delivery. Georg Thieme Verlag KG Stuttgart.

Supporting Real-Time Computer Vision Workloads using OpenVX on Multicore+GPU Platforms

DTIC Science & Technology

2015-05-01

a registered trademark of the NVIDIA Corporation . Report Documentation Page Form ApprovedOMB No. 0704-0188 Public reporting burden for the collection...from NVIDIA , we adapted an alpha- version of an NVIDIA OpenVX implementation called VisionWorks® [3] to run atop PGMRT (a graph-based mid- dleware...time support to an OpenVX implementation by NVIDIA called VisionWorks. Our modifications were applied to an alpha-version of VisionWorks. This alpha

Work environment perceptions following relocation to open-plan offices: A twelve-month longitudinal study.

PubMed

Bergström, Jessica; Miller, Michael; Horneij, Eva

2015-01-01

A workplace's design can have various positive or negative effects on the employees and since the 1970s the advantages and disadvantages of open-plan offices have been discussed. The aim of this study was to investigate perceived health, work environment and self-estimated productivity one month before and at three, six and twelve months after relocation from individual offices to an open-plan office environment. Employees from three departments within the same company group and who worked with relatively similar tasks and who were planned to be relocated from private offices to open-plan offices were invited to participate. Questionnaires comprising items from The Salutogenic Health Indicator Scale, The Work Experience Measurement Scale, the questionnaire by Brennan et al. about perceived performance and one question from the Work Ability Index were sent to participants one month before relocation (baseline) to open-plan offices and then at three, six and twelve months after relocation. At baseline, 82 questionnaires were sent out. The response rate was 85%. At the follow-ups 77-79 questionnaires were sent out and the response-rate was 70%-81%. At follow-ups, perceived health, job satisfaction and performance had generally deteriorated. The results of the study indicate that employees' perception of health, work environment and performance decreased during a 12 month period following relocation from individual offices to open-plan offices.

A ROSE-based OpenMP 3.0 Research Compiler Supporting Multiple Runtime Libraries

DOE Office of Scientific and Technical Information (OSTI.GOV)

Liao, C; Quinlan, D; Panas, T

2010-01-25

OpenMP is a popular and evolving programming model for shared-memory platforms. It relies on compilers for optimal performance and to target modern hardware architectures. A variety of extensible and robust research compilers are key to OpenMP's sustainable success in the future. In this paper, we present our efforts to build an OpenMP 3.0 research compiler for C, C++, and Fortran; using the ROSE source-to-source compiler framework. Our goal is to support OpenMP research for ourselves and others. We have extended ROSE's internal representation to handle all of the OpenMP 3.0 constructs and facilitate their manipulation. Since OpenMP research is oftenmore » complicated by the tight coupling of the compiler translations and the runtime system, we present a set of rules to define a common OpenMP runtime library (XOMP) on top of multiple runtime libraries. These rules additionally define how to build a set of translations targeting XOMP. Our work demonstrates how to reuse OpenMP translations across different runtime libraries. This work simplifies OpenMP research by decoupling the problematic dependence between the compiler translations and the runtime libraries. We present an evaluation of our work by demonstrating an analysis tool for OpenMP correctness. We also show how XOMP can be defined using both GOMP and Omni and present comparative performance results against other OpenMP compilers.« less

Effects of acoustic environment on work in private office rooms and open-plan offices - longitudinal study during relocation.

PubMed

Kaarlela-Tuomaala, A; Helenius, R; Keskinen, E; Hongisto, V

2009-11-01

The aim was to determine how the perceived work environment, especially acoustic environment, and its effects differed in private office rooms and in open-plan offices. The subjects consisted of 31 workers who moved from private office rooms to open-plan offices and who answered the questionnaire before and after the relocation. Private office rooms were occupied only by one person while open-plan offices were occupied by more than 20 persons. Room acoustical descriptors showed a significant reduction in speech privacy after relocation. The noise level averaged over the whole work day did not change but the variability of noise level reduced significantly. Negative effects of acoustic environment increased significantly, including increased distraction, reduced privacy, increased concentration difficulties and increased use of coping strategies. Self-rated loss of work performance because of noise doubled. Cognitively demanding work and phone conversations were most distracted by noise. The benefits that are often associated with open-plan offices did not appear: cooperation became less pleasant and direct and information flow did not change. Nowadays, most office workers, independent of job type, are located in open-plan offices without the individual needs of privacy, concentration and interaction being analysed. This intervention study consisted of professional workers. Their work tasks mainly required individual efforts, and interaction between other workers was not of primary concern, although necessary. The results suggest that the open-plan office is not recommended for professional workers. Similar intervention studies should also be made for other job types.

Effect of minimally invasive technique on return to work and narcotic use following transforaminal lumbar inter-body fusion: a review.

PubMed

Parker, Scott L; Lerner, Jason; McGirt, Matthew J

2012-01-01

Low back pain is one of the most prevalent and disabling musculoskeletal conditions affecting the working population in the United States. Informed, shared decision making among patients, clinicians, and case managers about treatment options for chronic low back pain-including the role of spinal fusion where medically necessary-can have a meaningful impact on return to work, normal function, and economic outcomes. Minimally invasive techniques for lumbar spinal fusion, including transforaminal lumbar interbody fusion (MIS TLIF) have recently been introduced with the goal of smaller operative wounds, less tissue trauma, and faster postoperative recovery when compared with open fusion. Although similar long-term clinical outcomes have been reported for MIS TLIF and open TLIF, the relative merits with respect to workplace productivity have not been comprehensively investigated. Time to return to work and narcotic independence after MIS TLIF and open TLIF are important parameters that may affect overall workplace productivity, and as such are the focus of this study. This study was performed via a review of the literature. We performed a systematic literature review to identify all published articles that reported on the postoperative outcomes of patients, as assessed by return to work or narcotic independence status or both, following MIS TLIF or open TLIF. A cumulative comparison was made for all included MIS TLIF versus open TLIF surgeries. Seventy-four published studies reported postoperative outcomes following MIS TLIF or open TLIF; only five (6.8%) studies directly described time to return to work or duration of narcotic use postoperatively or both, and were therefore included into the analysis of this review. Four studies in the published literature describe time to return to work following MIS TLIF or open TLIF, and two studies describe time to narcotic independence. Overall, the reviewed literature suggests that MIS TLIF may be associated with an accelerated time to narcotic independence and return to work versus open TLIF. There are limited data regarding time to return to work and duration of postoperative narcotic use following TLIF for low back pain. The available data appear to suggest that MIS TLIF may be associated with accelerated return to work and narcotic independence compared with open TLIF. Further analysis will be necessary to quantify the impact of MIS TLIF on workplace productivity and the indirect costs borne by patients and employers. Such information will be of value to case managers, disability managers, employers, patients, and clinicians aligned on reducing morbidity and hastening return to normal function.

Contemporary Scientists Discuss the Need for Openness and Open-Mindedness in Science and Society

ERIC Educational Resources Information Center

Mulhall, Pamela J.; Smith, Dorothy V.; Hart, Christina E.; Gunstone, Richard F.

2017-01-01

We report on findings from a qualitative study of Australian scientists whose work brings them into contact with the public. This research sought to understand how a school science curriculum could better represent the work of scientists today. We discuss the views expressed by our participant scientists about the importance of openness and…

Science Practical Work Instructional Technologies and Open Distance Learning in Science Teacher Training: A Case Study in Zimbabwe

ERIC Educational Resources Information Center

Bhukuvhani, Crispen; Mupa, Mathew; Mhishi, Misheck; Dziva, Daimond

2012-01-01

The practical work component offers unique challenges for university science courses. This is even more pertinent in an Open and Distance Learning (ODL) environment like the Bindura University of Science Education's Virtual and Open Distance Learning (VODL) programme. Effective ODL education should be flexible enough to accommodate science…

In Praise of Openness

NASA Astrophysics Data System (ADS)

Arunachalam, S.

2010-10-01

Open access brings greater visibility and impact to the work of scientists as is evidenced in the examples discussed in this paper. Researchers are often reluctant and afraid to deposit their works in Institutional Repositories. However, as is shown here, once they do so, they do not regret it. Open access will shortly become the norm and will be accepted by the vast majority of scientists. Seen through the lens of the philosophy of Bertrand Russell, the moral, economic and philosophical imperatives for open access are indeed strong.

Neonatal Intensive Care Unit Nurses Working in an Open Ward: Stress and Work Satisfaction.

PubMed

Lavoie-Tremblay, Mélanie; Feeley, Nancy; Lavigne, Geneviève L; Genest, Christine; Robins, Stéphanie; Fréchette, Julie

2016-01-01

There is some research on the impact of open-ward unit design on the health of babies and the stress experienced by parents and nurses in neonatal intensive care units. However, few studies have explored the factors associated with nurse stress and work satisfaction among nurses practicing in open-ward neonatal intensive care units. The purpose of this study was to examine what factors are associated with nurse stress and work satisfaction among nurses practicing in an open-ward neonatal intensive care unit. A cross-sectional correlational design was used in this study. Participants were nurses employed in a 34-bed open-ward neonatal intensive care unit in a major university-affiliated hospital in Montréal, Quebec, Canada. A total of 94 nurses were eligible, and 86 completed questionnaires (91% response rate). Descriptive statistics were computed to describe the participants' characteristics. To identify factors associated with nurse stress and work satisfaction, correlational analysis and multiple regression analyses were performed with the Nurse Stress Scale and the Global Work Satisfaction scores as the dependent variables. Different factors predict neonatal intensive care unit nurses' stress and job satisfaction, including support, family-centered care, performance obstacles, work schedule, education, and employment status. In order to provide neonatal intensive care units nurses with a supportive environment, managers can provide direct social support to nurses and influence the culture around teamwork.

VIEW FACING EAST LOOKING DOWN FROM OPEN HEARTH TAPPING FLOOR ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

VIEW FACING EAST LOOKING DOWN FROM OPEN HEARTH TAPPING FLOOR AREA, NOTE FOUNDATIONS OF OPEN HEARTH FURNACES. - Pittsburgh Steel Company, Monessen Works, Open Hearth Plant, Donner Avenue, Monessen, Westmoreland County, PA

Michigan Magnetic and Gravity Maps and Data: A Website for the Distribution of Data

USGS Publications Warehouse

Daniels, David L.; Kucks, Robert P.; Hill, Patricia L.; Snyder, Stephen L.

2009-01-01

This web site provides the best available, public-domain, aeromagnetic and gravity data in the State of Michigan and merges these data into composite grids that are available for downloading. The magnetic grid is compiled from 25 separate magnetic surveys that have been knit together to form a single composite digital grid and map. The magnetic survey grids have been continued to 305 meters (1,000 feet) above ground and merged together to form the State compilation. A separate map shows the location of the aeromagnetic surveys, color-coded to the survey flight-line spacing. In addition, a complete Bouguer gravity anomaly grid and map were generated from more than 20,000 gravity station measurements from 33 surveys. A table provides the facts about each gravity survey where known.

Antropometric parameters problem solving of shoe lasts by deforming membranes with medium weight

NASA Astrophysics Data System (ADS)

Albu, A. V.; Anghel Drugarin, C. V.; Barla, E. M.; Porav, V.

2018-01-01

The paper presents research results into getting a virtual model of shoe last and anthropometric parameters change. The most important change occurs in the fingers region. Alternatives CAD-CAM technology for next generation is based on DELCAM software for the CAM procedure and simulation of MATLAB software. This research has led to the virtual changes of the last, anthropometric parameter - the width of the fingers (ld) and shoe last length - (Lp) and images have been achieved with the representation in section of the shoe last changed from the original shoe lasts by FEM method (Finite element method) in MATLAB environment. The results are applied in the textile industry and in the elaboration of linings consumption or in the development of leather substitutes on fabric, knitted or woven material type.

Empowering rural women's groups for strengthening economic linkages: some Indian experiments.

PubMed

Rajagopal

1999-05-01

Through organizing informal self-help groups (SHGs), rural women in India are provided credit and extension support for various production-oriented income-generating activities. These activities usually include garment-making, embroidery, food processing, bee-keeping, basketry, gem cutting, weaving, and knitting. SHGs are self-governed, with decisions about production and marketing taken collectively, although the group leader is responsible for identifying potential marketing centers and consumers. These groups represent a new culture in rural development, breaking with traditional bureaucracy and top-down management. Informal groups empower rural women to manage rural industries and make decisions collectively for their common economic interests. Experience with SHGs in Orissa, lessons from nongovernmental organization intervention, and a model for empowering poor people in a small town in Kerala are discussed.

Physical activity in Latinas: social and environmental influences

PubMed Central

Larsen, Britta A; Pekmezi, Dorothy; Marquez, Becky; Benitez, Tanya J; Marcus, Bess H

2013-01-01

Latinas are the largest, fastest growing female ethnic minority group in the USA, and also report the lowest levels of physical activity. Following the framework of the social ecological model, this review examines unique social and environmental factors that influence physical activity in Latinas. Research shows that Latinas receive little social support for activity despite having large, close-knit social networks. Interventions incorporating social support components are generally effcacious. Latinas also face many environmental barriers, including crime, heat, traffic, lack of facilities and a fear of immigration enforcement, and there have been few attempts to address environmental barriers in Latino communities. Successful future interventions will need to consider unique social and environmental barriers affecting Latinas, and help Latinas learn to incorporate social networks into physical activity participation. PMID:23477325

Microcirculation and the physiome projects.

PubMed

Bassingthwaighte, James B

2008-11-01

The Physiome projects comprise a loosely knit worldwide effort to define the Physiome through databases and theoretical models, with the goal of better understanding the integrative functions of cells, organs, and organisms. The projects involve developing and archiving models, providing centralized databases, and linking experimental information and models from many laboratories into self-consistent frameworks. Increasingly accurate and complete models that embody quantitative biological hypotheses, adhere to high standards, and are publicly available and reproducible, together with refined and curated data, will enable biological scientists to advance integrative, analytical, and predictive approaches to the study of medicine and physiology. This review discusses the rationale and history of the Physiome projects, the role of theoretical models in the development of the Physiome, and the current status of efforts in this area addressing the microcirculation.

Open versus laparoscopic appendectomy.

PubMed

Herman, J; Duda, M; Lovecek, M; Svach, I

2003-01-01

To asses the role of laparoscopic appendectomy in the treatment of acute as well as chronic appendicitis on the basis of our own experiences. From the set of 849 patients treated with appendectomy (from January 1993 to December 2000) 331 were singled out, i.e.; those unable to work for some time and thus being on sickness benefit who asked for a medical certificate. They were operated on for either acute or chronic appendicitis. In our set of 331 patients (158 males, 173 females, the average age 29.4) open appendectomy was performed on 179 patients and laparoscopic appendectomy on 152. Laparoscopic appendectomy was performed in 43 males (28%) and 109 females (72%); open appendectomy in 115 males (64%) and 64 females (36%). Laparoscopic appendectomy took 53.7 +/- 18.1 minutes, open appendectomy took 43.6 +/- 8.99 minutes. The time of work disablement is longer in open appendectomy (open appendectomy: 41.2 +/- 9.91 days; laparoscopic appendectomy; 29.1 +/- 15.11 days). A significant difference (p < 0.00001) can be seen in the length of hospitalization (laparoscopic appendectomy: 5.0 +/- 2.75 days, open appendectomy: 8.3 +/- 2.83 days). Patients who undergo laparoscopic appendectomy spent less time in hospital, and they can return to work rather earlier. On the other hand the time of surgery is longer. Higher cost is compensated for with shorter hospitalization and early return to work.

Is Openness to Using Empirically Supported Treatments Related to Organizational Culture and Climate?

PubMed

Patterson Silver Wolf Adelv Unegv Waya, David A; Dulmus, Catherine N; Maguin, Eugene

2013-01-01

The overall purpose of this study is to investigate workers' openness towards implementing a new empirically supported treatment (EST) and whether the workers' openness scores relate to their workplace culture and climate scores. Participants in this study (N=1273) worked in a total of 55 different programs in a large child and family services organization and completed a survey measuring their attitudes toward ESTs. Results indicate that work groups that measure themselves as being more open to using ESTs rated their organizational cultures as being significantly more proficient and significantly less resistant to change. With ESTs becoming the gold standard for professional social work practices, it is important to have accessible pathways to EST implementation.

Work-based learning: challenges and opportunities.

PubMed

Gallagher, Ann; Holland, Lesley

This article discusses some of the challenges and opportunities arising from the development and implementation of an innovative work-based open and distance learning programme available exclusively to healthcare assistants working in general health and mental health practice. The programme is based on a partnership between the sponsoring organisation and the Open University. The focus is on the development of standards of proficiency, service user involvement, partnership working, skills development and the pedagogic implications of a work-based learning format.

Three Forms of the Knowledge Economy: Learning, Creativity and Openness

ERIC Educational Resources Information Center

Peters, Michael A.

2010-01-01

This paper outlines and reviews three forms and associated discourses of the "knowledge economy": the "learning economy", based on the work of Bengt-Ake Lundvall; the "creative economy" based on the work of Charles Landry, John Howkins and Richard Florida; and the "open knowledge economy" based on the work of Yochai Benkler and others. Arguably,…

Electromechanical properties of polyamide/lycra fabric treated with PEDOT:PSS

NASA Astrophysics Data System (ADS)

Tadesse, M. G.; Mengistie, D. A.; Loghin, C.; Chen, Y.; Wang, L.; Catalin, D.; Müller, C.; Nierstrasz, V.

2017-10-01

One of the challenges in smart textiles is to develop suitable multifunctional materials that can address simultaneously several characteristics such as durability, stretchability, lightweight, and conductivity. Conductive polymers which showed success in different technological fields like polymer solar cells and light emitting diodes are promising in many smart textile applications. In this work, we treated a common polyamide/lycra knitted fabric with PEDOT:PSS for stretchable e-textiles. PEDOT:PSS, with DMSO as a conductivity enhancer and different ratios of water-based polyurethane dispersions as a binder, was applied to the fabric with simple immersion and coating applications. The effect of different application methods and binder ratio on the surface resistance of the fabric was monitored with four point probe electrical surface resistance measurement systems. Samples prepared by immersion technique are more uniform and have higher conductivity than those prepared by a coating technique. SEM images showed that PEDOT:PSS is incorporated into the structure in the immersion method while in the coating it is majorly present on the surface of the fabric. The tensile measurement showed that the acidic PEDOT:PSS and polyurethane dispersion coating has no adverse effect on the tensile strength of the fabric. The coated samples can be stretched up to 700% while still reasonably conductive. The resistance increases only by a small amount when samples were stretched cyclically by stretching 100%. Generally, samples prepared by the immersion method maintained better conductivity while stretching than those by a coating method. The washing fastness of the samples was also assessed.

A process evaluation: does recruitment for an exercise program through ethnically specific channels and key figures contribute to its reach and receptivity in ethnic minority mothers?

PubMed

Hartman, Marieke A; Nierkens, Vera; Cremer, Stephan W; Stronks, Karien; Verhoeff, Arnoud P

2013-08-19

Ethnic minority women from low-income countries who live in high-income countries are more physically inactive than ethnic majority women in those countries. At the same time, they can be harder to reach with health promotion programs. Targeting recruitment channels and execution to ethnic groups could increase reach and receptivity to program participation. We explored using ethnically specific channels and key figures to reach Ghanaian, Antillean, and Surinamese mothers with an invitation for an exercise program, and subsequently, to determine the mothers' receptivity and participation. We conducted a mixed methods process evaluation in Amsterdam, The Netherlands. To recruit mothers, we employed ethnically specific community organizations and ethnically matched key figures as recruiters over Dutch health educators. Reach and participation were measured using reply cards and the attendance records from the exercise programs. Observations were made of the recruitment process. We interviewed 14 key figures and 32 mothers to respond to the recruitment channel and recruiter used. Content analysis was used to analyze qualitative data. Recruitment through ethnically specific community channels was successful among Ghanaian mothers, but less so among Antillean and Surinamese mothers. The more close-knit an ethnic community was, retaining their own culture and having poorer comprehension of the Dutch language, the more likely we were to reach mothers through ethnically specific organizations. Furthermore, we found that using ethnically matched recruiters resulted in higher receptivity to the program and, among the Ghanaian mothers in particular, in greater participation. This was because the ethnically matched recruiter was a familiar, trusted person, a translator, and a motivator who was enthusiastic, encouraging, and able to adapt her message (targeting/tailoring). Using a health expert was preferred in order to increase the credibility and professionalism of the recruitment. Recruitment for an exercise program through ethnically specific organizations seems to contribute to its reach, particularly in close-knit, highly organized ethnic communities with limited fluency in the local language. Using ethnically matched recruiters as motivator, translator, and trusted person seems to enhance receptivity of a health promotion program. An expert is likely to be needed for effective information delivery.

Successful Feasibility Human Trial of a New Self-Expandable Percutaneous Pulmonary Valve (Pulsta Valve) Implantation Using Knitted Nitinol Wire Backbone and Trileaflet α-Gal-Free Porcine Pericardial Valve in the Native Right Ventricular Outflow Tract.

PubMed

Kim, Gi Beom; Song, Mi Kyoung; Bae, Eun Jung; Park, Eun-Ah; Lee, Whal; Lim, Hong-Gook; Kim, Yong Jin

2018-06-01

Self-expandable percutaneous pulmonary valve implantation (PPVI) for native right ventricular outflow tract lesions is still in the clinical trial phase. The aim of this study is to present the result of feasibility study of a novel self-expandable knitted nitinol wire stent mounted with a treated trileaflet α-Gal-free porcine pericardial valve for PPVI. A feasibility study using Pulsta valve (TaeWoong Medical Co, Gyeonggi-do, South Korea) was designed for patients with severe pulmonary regurgitation in the native right ventricular outflow tract, and 6-month follow-up outcomes were reviewed. Ten tetralogy of Fallot patients were enrolled. Before PPVI, severe pulmonary regurgitation (mean pulmonary regurgitation fraction, 45.5%±7.2%; range, 34.9%-56%) and enlarged right ventricular volume (mean indexed right ventricular end-diastolic volume, 176.7±14.3 mL/m 2 ; range, 158.9-205.9 mL/m 2 ) were present. The median age at PPVI was 21.7±6.5 years (range, 13-36 years). Five patients were successfully implanted with 28 mm and the other 5 with 26 mm valves loaded on the 18F delivery cable. No significant periprocedural complications were noted in any patient. At the 6-month follow-up, indexed right ventricular end-diastolic volume was dramatically decreased to 126.3±20.3 mL/m 2 (range, 99-164.2 mL/m 2 ), and the mean value of peak instantaneous pressure gradient between the right ventricle and the pulmonary artery decreased from 6.8±3.5 mm Hg (range, 2-12 mm Hg) before PPVI to 5.7±6.7 mm Hg (range, 2-12 mm Hg) without significant pulmonary regurgitation. There was no adverse event associated with the valve. A feasibility study of the Pulsta valve for native right ventricular outflow tract lesions was completed successfully with planned Pulsta valve implantation and demonstrated good short-term effectiveness without serious adverse events. URL: https://www.clinicaltrials.gov. Unique identifier: NCT02555319. © 2018 American Heart Association, Inc.

Comparative effectiveness of minimally invasive versus open transforaminal lumbar interbody fusion: 2-year assessment of narcotic use, return to work, disability, and quality of life.

PubMed

Adogwa, Owoicho; Parker, Scott L; Bydon, Ali; Cheng, Joseph; McGirt, Matthew J

2011-12-01

Retrospective cohort comparison between minimally invasive (MIS) and open transforaminal lumbar interbody fusion (TLIF). To assess 2 earlier unstudied endpoints (duration of narcotic use and return to work) and long-term pain, disability, and quality of life (QOL) for MIS-TLIF versus open-TLIF. MIS-TLIF for lumbar spondylolithesis theoretically allows for surgical treatment of back and leg pain while minimizing blood loss and tissue injury. Although earlier studies have shown shorter hospital stay and equivocal 6 and 24 month outcomes with MIS-TLIF versus open-TLIF, the effect of MIS techniques on postoperative narcotic use and return to work are poorly understood. Thirty patients undergoing MIS-TLIF (n = 15) or open-TLIF (n = 15) for grade I degenerative spondylolithesis-associated back and leg pain were enrolled. Two-year outcomes were assessed through phone interview and it included pain [visual analog scale (VAS)], low-back disability (Oswestry disability index), EuroQol-5D, occupational disability, and narcotic use. MIS-TLIF versus open-TLIF cohorts were similar at baseline. Median [interquartile range (IQR)] length of hospitalization after surgery was significantly less for MIS-TLIF versus open-TLIF [3 (3 to 3) vs 5.5 (4 to 6) d], P = 0.001. MIS-TLIF versus open-TLIF patients showed similar 2-year improvement in VAS for back pain, VAS for leg pain, Oswestry disability index, and EuroQol-5D scores. Overall, median (IQR) length of postoperative narcotic use was 3.0 (1.4 to 4.6) weeks and significantly shorter for MIS-TLIF versus open-TLIF patients [2.0 (1.0 to 3.0) vs 4.0 (1.4 to 4.6) wk, P = 0.008]. Overall, median (IQR) time to return to work was 13.9 (2.2 to 25.5) weeks and significantly shorter for MIS-TLIF versus open-TLIF patients [8.5 (4.4 to 21.4) vs 17.1 (1.8 to 35.9) wk, P = 0.02]. Both MIS-TLIF and open-TLIF provide long-term improvement in pain, disability, and EuroQol-5D in patients with back and leg pain from grade I degenerative spondylolithesis. However, MIS-TLIF may allow for shortened hospital stays, reduced postoperative narcotic use, and accelerated return to work, reducing both direct medical costs and indirect costs of lost work productivity associated with TLIF procedures.

Characterizing and Mitigating Work Time Inflation in Task Parallel Programs

DOE PAGES

Olivier, Stephen L.; de Supinski, Bronis R.; Schulz, Martin; ...

2013-01-01

Task parallelism raises the level of abstraction in shared memory parallel programming to simplify the development of complex applications. However, task parallel applications can exhibit poor performance due to thread idleness, scheduling overheads, and work time inflation – additional time spent by threads in a multithreaded computation beyond the time required to perform the same work in a sequential computation. We identify the contributions of each factor to lost efficiency in various task parallel OpenMP applications and diagnose the causes of work time inflation in those applications. Increased data access latency can cause significant work time inflation in NUMA systems.more » Our locality framework for task parallel OpenMP programs mitigates this cause of work time inflation. Our extensions to the Qthreads library demonstrate that locality-aware scheduling can improve performance up to 3X compared to the Intel OpenMP task scheduler.« less

DOE Office of Scientific and Technical Information (OSTI.GOV)

Barbara Chapman

OpenMP was not well recognized at the beginning of the project, around year 2003, because of its limited use in DoE production applications and the inmature hardware support for an efficient implementation. Yet in the recent years, it has been graduately adopted both in HPC applications, mostly in the form of MPI+OpenMP hybrid code, and in mid-scale desktop applications for scientific and experimental studies. We have observed this trend and worked deligiently to improve our OpenMP compiler and runtimes, as well as to work with the OpenMP standard organization to make sure OpenMP are evolved in the direction close tomore » DoE missions. In the Center for Programming Models for Scalable Parallel Computing project, the HPCTools team at the University of Houston (UH), directed by Dr. Barbara Chapman, has been working with project partners, external collaborators and hardware vendors to increase the scalability and applicability of OpenMP for multi-core (and future manycore) platforms and for distributed memory systems by exploring different programming models, language extensions, compiler optimizations, as well as runtime library support.« less

The relationship between different exercise modes and visuospatial working memory in older adults: a cross-sectional study.

PubMed

Guo, Wei; Wang, Biye; Lu, Yue; Zhu, Qin; Shi, Zhihao; Ren, Jie

2016-01-01

The purpose of the study was to investigate the relationship between different exercise modes and visuospatial working memory in healthy older adults. A cross-sectional design was adopted. A total of 111 healthy older adults were enrolled in the study. They were classified by the exercise-related questionnaire to be in an open-skill group, closed-skill group or sedentary group. In experiment 1, the participants performed a visuospatial working memory task. The results indicated that both closed-skill (p < 0.05) and open-skill (p < 0.01) groups reached a higher accuracy than the sedentary group. Experiment 2 examined whether the exercise-induced benefit of working memory was manifested in passive maintenance or active manipulation of working memory which was assessed by visuospatial short-term memory task and visuospatial mental rotation task, respectively. The results showed that the open-skill (p < 0.01) group was more accurate than the sedentary group in the visuospatial short-term memory task, whereas the group difference in the visuospatial mental rotation task was not significant. These findings combined to suggest that physical exercise was associated with better visuospatial working memory in older adults. Furthermore, open-skill exercises that demand higher cognitive processing showed selective benefit for passive maintenance of working memory.

5. EXTERIOR VIEW OF ELECTROSTATIC PRECIPITATORS FOR OPEN HEARTH NO. ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

5. EXTERIOR VIEW OF ELECTROSTATIC PRECIPITATORS FOR OPEN HEARTH NO. 5 (Martin Stupich) - U.S. Steel Homestead Works, Open Hearth Steelmaking Plant, Along Monongahela River, Homestead, Allegheny County, PA

4. EXTERIOR VIEW OF ELECTROSTATIC PRECIPITATORS FOR OPEN HEARTH NO. ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

4. EXTERIOR VIEW OF ELECTROSTATIC PRECIPITATORS FOR OPEN HEARTH NO. 5 (Martin Stupich) - U.S. Steel Homestead Works, Open Hearth Steelmaking Plant, Along Monongahela River, Homestead, Allegheny County, PA

VIEW LOOKING NORTHEAST WITH OPEN HEARTH TO THE LEFT, PITTSBURGH ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

VIEW LOOKING NORTHEAST WITH OPEN HEARTH TO THE LEFT, PITTSBURGH & LAKE ERIE RAILROAD TRACKS CENTER. - Pittsburgh Steel Company, Monessen Works, Open Hearth Plant, Donner Avenue, Monessen, Westmoreland County, PA

Knitting the Threads of Silk through Time: Behçet's Disease—Past, Present, and Future

PubMed Central

Stack, Austin G.; Fraser, Alexander D.

2017-01-01

Behçet's disease (BD) is a chronic relapsing vasculitis that affects vessels of all types and sizes with a broad spectrum of phenotypic heterogeneity and complex immunopathogenesis. Efforts by the scientific community to resolve the unmet needs of BD and gaps in our knowledge have been hampered by considerable challenges that primarily relate to the rare nature of the disease in many parts of the world and its heterogeneity. Controversies remain in many aspects of the disease including the diagnostic criteria, immunopathogenesis and biomarker discovery, geographical variation, and therapeutic considerations. In this review, we highlight recent advances in our scientific understanding of BD, shed new insights into diagnostic and treatment strategies, and discuss residual gaps in our knowledge that will serve as the basis for current and future research. PMID:29081805

Computationally designed high specificity inhibitors delineate the roles of BCL2 family proteins in cancer.

PubMed

Berger, Stephanie; Procko, Erik; Margineantu, Daciana; Lee, Erinna F; Shen, Betty W; Zelter, Alex; Silva, Daniel-Adriano; Chawla, Kusum; Herold, Marco J; Garnier, Jean-Marc; Johnson, Richard; MacCoss, Michael J; Lessene, Guillaume; Davis, Trisha N; Stayton, Patrick S; Stoddard, Barry L; Fairlie, W Douglas; Hockenbery, David M; Baker, David

2016-11-02

Many cancers overexpress one or more of the six human pro-survival BCL2 family proteins to evade apoptosis. To determine which BCL2 protein or proteins block apoptosis in different cancers, we computationally designed three-helix bundle protein inhibitors specific for each BCL2 pro-survival protein. Following in vitro optimization, each inhibitor binds its target with high picomolar to low nanomolar affinity and at least 300-fold specificity. Expression of the designed inhibitors in human cancer cell lines revealed unique dependencies on BCL2 proteins for survival which could not be inferred from other BCL2 profiling methods. Our results show that designed inhibitors can be generated for each member of a closely-knit protein family to probe the importance of specific protein-protein interactions in complex biological processes.

Phototoxicity testing by online irradiation and HPLC.

PubMed

Schröder, Sven; Surmann, J P

2006-11-01

A high-performance liquid chromatography (HPLC) system was developed for the determination of drug photostability and phototoxicity based on an automated column-switching system with aqueous online UV-A irradiation and hyphenated organic separation of the drug and its photoproducts. The photoreactor is built with an poly(ethylene-co-tetrafluoroethylene) (ETFE) reaction coil knitted around a UV-A light source. The chromatographic separation was performed with two special C18 columns, which are also suitable for using with pure water as eluent. Degradation of chlorpromazine (CPZ) by ultraviolet light was investigated at pH 7 and pH 3. Furthermore chlorpromazine was irradiated in the presence of guanosine-5-monophosphate (GMP) in pH 7 buffered solution, leading to a new photoproduct. In the pH 3 irradiation studies of CPZ and GMP, no reaction was detected between the molecules.

Oregon Magnetic and Gravity Maps and Data: A Web Site for Distribution of Data

USGS Publications Warehouse

Roberts, Carter W.; Kucks, Robert P.; Hill, Patricia L.

2008-01-01

This web site gives the results of a USGS project to acquire the best available, public-domain, aeromagnetic and gravity data in the United States and merge these data into uniform, composite grids for each State. The results for the State of Oregon are presented here on this site. Files of aeromagnetic and gravity grids and images are available for these States for downloading. In Oregon, 49 magnetic surveys have been knit together to form a single digital grid and map. Also, a complete Bouguer gravity anomaly grid and map was generated from 40,665 gravity station measurements in and adjacent to Oregon. In addition, a map shows the location of the aeromagnetic surveys, color-coded to the survey flight-line spacing. This project was supported by the Mineral Resource Program of the USGS.

Establishing a Nation Wide Infrastructure for Systematic Use of Patient Reported Information.

PubMed

Jensen, Sanne; Lyng, Karen Marie

2018-01-01

In Denmark, we have set up a program to establish a nationwide infrastructure for Patient Reported Outcome (PRO) questionnaires. The effort is divided into an IT infrastructure part and a questionnaire development part. This paper describes how development and evaluation are closely knit together in the two tracks, as complexity is high in the PRO field and IT infrastructure, legal issues, various clinical workflows and the numerous stakeholders have to be taken into account concurrently. In the design process, we have thus used a participatory design approach to ensure a high level of active stakeholder involvement and capability of addressing all the relevant issues. In the next phases, we will apply the IT infrastructure in the planned full-scale evaluation of the questionnaires developed in the first phase, while we continue to develop new national questionnaires.

Development of a stitched/RFI composite transport wing

NASA Technical Reports Server (NTRS)

Kropp, Yury

1995-01-01

Development of a composite wing primary structure for commercial transport aircraft is being undertaken at McDonnell Douglas under NASA contract. The focus of the program is to design and manufacture a low cost composite wing which can effectively compete with conventional metal wing structures in terms of cost, weight, and ability to withstand damage. These goals are being accomplished by utilizing the stitched/RFI manufacturing process during which the dry fiber preforms consisting of several stacks of warp-knit material are stitched together, impregnated with resin and cured. The stitched/RFI wing skin panels have exceptional damage tolerance and fatigue characteristics, are easily repairable, and can carry higher gross stress than their metal counterparts. This paper gives an overview of the program, describes the key features of the composite wing design and addresses major issues on analysis and manufacturing.

Advances in Mechanical Architectures of Large Precision Space Apertures

NASA Astrophysics Data System (ADS)

Datashvili, Leri; Maghaldadze, Nikoloz; Endler, Stephan; Pauw, Julian; He, Peng; Baier, Horst; Ihle, Alexander; Santiago Prowlad, Julian

2014-06-01

Recent advances in development of mechanical architectures of large deployable reflectors (LDRs) through the projects of the European Space Agency are addressed in this paper. Two different directions of LDR architectures are being investigated and developed at LSS and LLB. These are LDRs with knitted metal mesh and with flexible shell-membrane reflecting surfaces. The first direction is matured and required advancing of the novel architecture of the supporting structure that provides deployment and final shape accuracy of the metal mesh is underway. The second direction is rather new and its current development stage is focused on investigations of dimensional stability of the flexible shell-membrane reflecting surface. In both directions 5 m diameter functional models will be built to demonstrate achieved performances, which shall prepare the basis for further improvement of their technology readiness levels.

Novel Composites for Wing and Fuselage Applications. Task 1; Novel Wing Design Concepts

NASA Technical Reports Server (NTRS)

Suarez, J. A.; Buttitta, C.; Flanagan, G.; DeSilva, T.; Egensteiner, W.; Bruno, J.; Mahon, J.; Rutkowski, C.; Collins, R.; Fidnarick, R.;

Bonelike apatite formation on ethylene-vinyl alcohol copolymer modified with silane coupling agent and calcium silicate solutions.

PubMed

Oyane, Ayako; Kawashita, Masakazu; Nakanishi, Kazuki; Kokubo, Tadashi; Minoda, Masahiko; Miyamoto, Takeaki; Nakamura, Takashi

2003-05-01

An ethylene-vinyl alcohol copolymer (EVOH) was treated with a silane coupling agent and calcium silicate solutions, and then soaked in a simulated body fluid (SBF) with ion concentrations approximately equal to those of human blood plasma. A smooth and uniform bonelike apatite layer was successfully formed on both the EVOH plate and the EVOH-knitted fibers in SBF within 2 days. Part of the structure of the resulting apatite-EVOH fiber composite was similar to that of natural bone. If this kind of composite can be fabricated into a three-dimensional structure similar to natural bone, the resultant composite is expected to exhibit both mechanical properties analogous to those of natural bone and bone-bonding ability. Hence, it has great potential as a bone substitute. Copyright 2003 Elsevier Science Ltd.

Looking southeast at bottom house with open hearth building attached ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Looking southeast at bottom house with open hearth building attached to the right. - U.S. Steel National Tube Works, Open Hearth Steelmaking Plant, Along Monongahela River, McKeesport, Allegheny County, PA

Using Peer Feedback to Promote Reflection on Open-Ended Problems

NASA Astrophysics Data System (ADS)

Reinholz, Daniel L.; Dounas-Frazer, Dimitri R.

2016-09-01

This paper describes a new approach for learning from homework called Peer-Assisted Reflection (PAR). PAR involves students using peer feedback to improve their work on open-ended homework problems. Collaborating with peers and revising one's work based on the feedback of others are important aspects of doing and learning physics. While notable exceptions exist, homework and exams are generally individual activities that do not support collaboration and refinement, which misses important opportunities to use assessment for learning. In contrast, PAR provides students with a structure to iteratively engage with challenging, open-ended problems and solicit the input of their peers to improve their work.

This presentation will discuss how PLOS ONE collaborates with many different scientific communities to help create, share, and preserve the scholarly works produced by their researchers with emphasis on current common difficulties faced by communities, practical solutions, and a broader view of the importance of open data and reproducibility.

NASA Astrophysics Data System (ADS)

Kroffe, K.

2017-12-01

The mission of the Public Library of Science is to accelerate progress in science and medicine by leading a transformation in research communication. Researchers' ability to share their work without restriction is essential, but critical to sharing is open data, transparency in peer review, and an open approach to science assessment. In this session, we will discuss how PLOS ONE collaborates with many different scientific communities to help create, share, and preserve the scholarly works produced by their researchers with emphasis on current common difficulties faced by communities, practical solutions, and a broader view of the importance of open data and reproducibility.

Distance Education and Open Learning in Sub-Saharan Africa: Criteria and Conditions for Quality and Critical Success Factor-- Working Group on Distance Education and Open Learning. A Survey of Policy and Practice. Final Report

ERIC Educational Resources Information Center

Commonwealth of Learning, 2004

2004-01-01

Both of these "Surveys of policy and practice" were conducted on behalf of COL by the South African Institute for Distance Education (SAIDE) as part of COL's partnership agreement with the Association for the Development of Education in Africa (ADEA) Working Group on Distance Education and Open Learning. The first report identifies…

29 CFR 1918.35 - Open hatches.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 29 Labor 7 2014-07-01 2014-07-01 false Open hatches. 1918.35 Section 1918.35 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR (CONTINUED) SAFETY AND HEALTH REGULATIONS FOR LONGSHORING Working Surfaces § 1918.35 Open hatches. Open weather deck...

29 CFR 1918.35 - Open hatches.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 29 Labor 7 2010-07-01 2010-07-01 false Open hatches. 1918.35 Section 1918.35 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR (CONTINUED) SAFETY AND HEALTH REGULATIONS FOR LONGSHORING Working Surfaces § 1918.35 Open hatches. Open weather deck...

29 CFR 1918.35 - Open hatches.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 29 Labor 7 2011-07-01 2011-07-01 false Open hatches. 1918.35 Section 1918.35 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR (CONTINUED) SAFETY AND HEALTH REGULATIONS FOR LONGSHORING Working Surfaces § 1918.35 Open hatches. Open weather deck...

29 CFR 1918.35 - Open hatches.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 29 Labor 7 2012-07-01 2012-07-01 false Open hatches. 1918.35 Section 1918.35 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR (CONTINUED) SAFETY AND HEALTH REGULATIONS FOR LONGSHORING Working Surfaces § 1918.35 Open hatches. Open weather deck...

78 FR 18579 - State Energy Advisory Board; Open Teleconference

Federal Register 2010, 2011, 2012, 2013, 2014

2013-03-27

...; Open Teleconference AGENCY: Office of Energy Efficiency and Renewable Energy, Department of Energy. ACTION: Notice of Open Teleconference. SUMMARY: This notice announces a teleconference call of the State... work on agenda items and details for the June 2013 meeting. Public Participation: The meeting is open...

29 CFR 1918.35 - Open hatches.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 29 Labor 7 2013-07-01 2013-07-01 false Open hatches. 1918.35 Section 1918.35 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR (CONTINUED) SAFETY AND HEALTH REGULATIONS FOR LONGSHORING Working Surfaces § 1918.35 Open hatches. Open weather deck...

Support of Multidimensional Parallelism in the OpenMP Programming Model

NASA Technical Reports Server (NTRS)

Jin, Hao-Qiang; Jost, Gabriele

2003-01-01

OpenMP is the current standard for shared-memory programming. While providing ease of parallel programming, the OpenMP programming model also has limitations which often effect the scalability of applications. Examples for these limitations are work distribution and point-to-point synchronization among threads. We propose extensions to the OpenMP programming model which allow the user to easily distribute the work in multiple dimensions and synchronize the workflow among the threads. The proposed extensions include four new constructs and the associated runtime library. They do not require changes to the source code and can be implemented based on the existing OpenMP standard. We illustrate the concept in a prototype translator and test with benchmark codes and a cloud modeling code.

The effect of different types of employment on quality of life.

PubMed

Kober, R; Eggleton, I R C

2005-10-01

Despite research that has investigated whether the financial benefits of open employment exceed the costs, there has been scant research as to the effect sheltered and open employment have upon the quality of life of participants. The importance of this research is threefold: it investigates outcomes explicitly in terms of quality of life; the sample size is comparatively large; and it uses an established and validated questionnaire. One hundred and seventeen people with intellectual disability (ID) who were employed in either open or sheltered employment by disability employment agencies were interviewed. Quality of life was assessed using the Quality of Life Questionnaire. After making an initial assessment to see whether the outcomes achieved depended on type of employment, quality of life scores were analyzed controlling for participants' level of functional work ability (assessed via the Functional Assessment Inventory). The results showed that participants placed in open employment reported statistically significant higher quality of life scores. When the sample was split based upon participants' functional work ability, the type of employment had no effect on the reported quality of life for participants with a low functional work ability. However, for those participants with a high functional work ability, those in open employment reported statistically significantly higher quality of life. The results of this study support the placement of people with ID with high functional work ability into open employment. However, a degree of caution needs to be taken in interpreting the results presented given the disparity in income levels between the two types of employment.

3. EXTERIOR VIEW INTO PART OF OPEN HEARTH NO. 5 ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

3. EXTERIOR VIEW INTO PART OF OPEN HEARTH NO. 5 WITH RAILROAD TRESTLE IN FOREGROUND. (Jet Lowe) - U.S. Steel Homestead Works, Open Hearth Steelmaking Plant, Along Monongahela River, Homestead, Allegheny County, PA

Open Hands, Open Hearts: Working with Native Youth in the Schools.

ERIC Educational Resources Information Center

Garrett, Michael Tlanusta; Bellon-Harn, Monica L.; Torres-Rivera, Edil; Garrett, J. T.; Roberts, Lisen C.

2003-01-01

A comprehensive discussion of the potential for cultural discontinuity experienced by native youth in the schools is offered with implications for culturally responsive service delivery. Practical recommendations are provided for special educators and related service professionals working with native youth to improve knowledge, awareness, and…

29 CFR 1915.73 - Guarding of deck openings and edges.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 29 Labor 7 2010-07-01 2010-07-01 false Guarding of deck openings and edges. 1915.73 Section 1915..., Ladders and Other Working Surfaces § 1915.73 Guarding of deck openings and edges. (a) The provisions of... coamings to a height of 24 inches or around other large openings, the edge of the opening shall be guarded...

A social survey on the noise impact in open-plan working environments in China.

PubMed

Zhang, Mei; Kang, Jian; Jiao, Fenglei

2012-11-01

The aim of this study is to reveal noise impact in open-plan working environments in China, through a series of questionnaire surveys and acoustic measurements in typical open-plan working environments. It has been found that compared to other physical environmental factors in open-plan working environments, people are much less satisfied with the acoustic environment. The noise impact in the surveyed working environments is rather significant, in terms of sound level inside the office, understanding of colleagues' conversation, and the use of background music such as music players. About 30-50% of the interviewees think that various noise sources inside and outside offices are 'very disturbing' and 'disturbing', and the most annoying sounds include noises from outside, ventilation systems, office equipment, and keyboard typing. Using higher panels to separate work space, or working in enclosed offices, are regarded as effective improvement measures, whereas introducing natural sounds to mask unwanted sounds seems to be not preferable. There are significant correlations between the evaluation of acoustic environment and office symptoms, including hypersensitivity to loud sounds, easily getting tired and depression. There are also significant correlations between evaluation of various acoustics-related factors and certain statements relating to job satisfaction, including sensitivity to noise, as well as whether conversations could be heard by colleagues. Copyright © 2012 Elsevier B.V. All rights reserved.

Design Support System for Open Distance Learning Student Teamwork

NASA Astrophysics Data System (ADS)

Putranto, A.; Pradipto, Y. D.

2017-01-01

Open distance learning students in doing team assignment, they seldom face to some problems such as student fell unfair in numbers of workload contribution, instructors also do not know which students do more work than others. So there are some questions ie: how to connect between instructor, team members, and working documents. Methods will be used are first, analyzing current condition and last by designing systems to connect between instructor, team members, and document. The expected result is support systems for open distance learning student teamwork.

LONGITUDINAL VIEW OF THE SOAKING PIT BUILDING INTERIOR WITH OPEN ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

LONGITUDINAL VIEW OF THE SOAKING PIT BUILDING INTERIOR WITH OPEN HEARTH IN BACKGROUND AND FURNACE PIT/ STACK AREA TO THE LEFT. - Pittsburgh Steel Company, Monessen Works, Open Hearth Plant, Donner Avenue, Monessen, Westmoreland County, PA

How open science helps researchers succeed.

PubMed

McKiernan, Erin C; Bourne, Philip E; Brown, C Titus; Buck, Stuart; Kenall, Amye; Lin, Jennifer; McDougall, Damon; Nosek, Brian A; Ram, Karthik; Soderberg, Courtney K; Spies, Jeffrey R; Thaney, Kaitlin; Updegrove, Andrew; Woo, Kara H; Yarkoni, Tal

2016-07-07

Open access, open data, open source and other open scholarship practices are growing in popularity and necessity. However, widespread adoption of these practices has not yet been achieved. One reason is that researchers are uncertain about how sharing their work will affect their careers. We review literature demonstrating that open research is associated with increases in citations, media attention, potential collaborators, job opportunities and funding opportunities. These findings are evidence that open research practices bring significant benefits to researchers relative to more traditional closed practices.

Caught in the middle? How women deal with conflicting pregnancy-advice from health professionals and their social networks.

PubMed

Schölmerich, Vera L N; Ghorashi, Halleh; Denktaş, Semiha; Groenewegen, Peter

2016-04-01

to investigate how pregnant women deal with conflicting advice from their social networks and their caregivers and how this influenced their pregnancy-related behaviours. a qualitative study based on face-to-face interviews and focus-groups. We applied an inductive analysis technique closely following the 'Gioia method'. impoverished neighbourhoods in Rotterdam, the Netherlands. 40 women who were pregnant, or had given birth within the last 12 months. 12 women were Native Dutch, 16 had a Moroccan background, and 12 had a Turkish background. all women faced a misalignment of advice by health professionals and social networks. For the native Dutch respondents, this misalignment did not seem to present a challenge. They had a strongly articulated preference for the advice of health professionals, and did not fear any social consequences for openly following their advice. For the women with a Turkish/Moroccan background, however, this discrepancy in advice presented a dilemma. Following one piece of advice seemed to exclude also following the other one, which would possibly entail social consequences. These women employed one of the three strategies to deal with this dilemma: a) avoiding the dilemma (secretly not following the advice of one side), b) embracing the dilemma (combining conflicting advice), and c) resolving the dilemma (communicating between both sides). we argue that the currently popular interventions geared towards increasing the health literacy of non-Western ethnic minority pregnant women and improving communication between ethnic minority clients and caregivers are not sufficient, and might even exacerbate the dilemma some pregnant women face. As an alternative, we recommend involving not only caregivers but also women's social network in intervention efforts. Interventions could aim to increase the negotiation capacity of the target group, but also to increase the health literacy of the members of their social network to enable the circulation of 'new' information within a rather homogeneous, tight-knit network. Copyright © 2016 Elsevier Ltd. All rights reserved.

Business model configuration and dynamics for technology commercialization in mature markets.

PubMed

Flammini, Serena; Arcese, Gabriella; Lucchetti, Maria Claudia; Mortara, Letizia

2017-01-01

The food industry is a well-established and complex industry. New entrants attempting to penetrate it via the commercialization of a new technological innovation could face high uncertainty and constraints. The capability to innovate through collaboration and to identify suitable strategies and innovative business models (BMs) can be particularly important for bringing a technological innovation to this market. However, although the potential for these capabilities has been advocated, we still lack a complete understanding of how new ventures could support the technology commercialization process via the development of BMs. The paper aims to discuss these issues. To address this gap, this paper builds a conceptual framework that knits together the different bodies of extant literature (i.e. entrepreneurship, strategy and innovation) to analyze the BM innovation processes associated with the exploitation of emerging technologies; determines the suitability of the framework using data from the exploratory case study of IT IS 3D - a firm which has started to exploit 3D printing in the food industry; and improves the initial conceptual framework with the findings that emerged in the case study. From this analysis it emerged that: companies could use more than one BM at a time; hence, BM innovation processes could co-exist and be run in parallel; the facing of high uncertainty might lead firms to choose a closed and/or a familiar BM, while explorative strategies could be pursued with open BMs; significant changes in strategies during the technology commercialization process are not necessarily reflected in a radical change in the BM; and firms could deliberately adopt interim strategies and BMs as means to identify the more suitable ones to reach the market. This case study illustrates how firms could innovate the processes of their BM development to face the uncertainties linked with the entry into a mature and highly conservative industry (food).

Structure of an Odorant-Vinding Protein form the Mosquito Aedes aegypti Suggests a Binding Pocket Covered by a pH-Sensitive

DOE Office of Scientific and Technical Information (OSTI.GOV)

N Leite; R Krogh; W Xu

The yellow fever mosquito, Aedes aegypti, is the primary vector for the viruses that cause yellow fever, mostly in tropical regions of Africa and in parts of South America, and human dengue, which infects 100 million people yearly in the tropics and subtropics. A better understanding of the structural biology of olfactory proteins may pave the way for the development of environmentally-friendly mosquito attractants and repellents, which may ultimately contribute to reduction of mosquito biting and disease transmission. Previously, we isolated and cloned a major, female-enriched odorant-binding protein (OBP) from the yellow fever mosquito, AaegOBP1, which was later inadvertently renamedmore » AaegOBP39. We prepared recombinant samples of AaegOBP1 by using an expression system that allows proper formation of disulfide bridges and generates functional OBPs, which are indistinguishable from native OBPs. We crystallized AaegOBP1 and determined its three-dimensional structure at 1.85 {angstrom} resolution by molecular replacement based on the structure of the malaria mosquito OBP, AgamOBP1, the only mosquito OBP structure known to date. The structure of AaegOBP1 (= AaegOBP39) shares the common fold of insect OBPs with six {alpha}-helices knitted by three disulfide bonds. A long molecule of polyethylene glycol (PEG) was built into the electron-density maps identified in a long tunnel formed by a crystallographic dimer of AaegOBP1. Circular dichroism analysis indicated that delipidated AaegOBP1 undergoes a pH-dependent conformational change, which may lead to release of odorant at low pH (as in the environment in the vicinity of odorant receptors). A C-terminal loop covers the binding cavity and this 'lid' may be opened by disruption of an array of acid-labile hydrogen bonds thus explaining reduced or no binding affinity at low pH.« less

Gender in relation to work motivation, satisfaction and use of day center services among people with psychiatric disabilities.

PubMed

Eklund, Mona; Eklund, Lisa

2017-05-01

Day centres can prepare for open-market employment, and attendees' work motivation is key in this. Adopting a gender perspective, this study investigated (1) motivation for day centre attendance, satisfaction with the day centre services, number of hours spent there, and number and type of occupations performed; and (2) whether those factors were related with motivation for open-market employment. Women (n = 164) and men (n = 160) with psychiatric disabilities completed self-report questionnaires. There were no gender differences regarding satisfaction with the day centre services or number of hours spent there, but women engaged in more occupations. More women than men performed externally-oriented services and textile work, while men were in the majority in workshops. Externally oriented services, working in workshops, and low satisfaction with the day centre services were associated with higher motivation for employment. Women and men were equally motivated for employment. Women scored higher on motivation for attending the day centre, something that may deter transition into open-market employment. For men, less motivation for attending day centres may reduce their possibilities of gaining skills that can facilitate transitioning to open-market employment. Thus, the possibility for transitioning from day centre activities to open-market employment may be gendered.

Data Products | Energy Analysis | NREL

Science.gov Websites

Project Finance Provides information on the Solar Access to Public Capital working group, Market Insights in the NSRDB Viewer. Open EI (Open Energy Information) OpenEI is a knowledge sharing online community efficiency. The Open PV Project A collaborative effort between government, industry, and the public to

Effective small group teaching strategies for research supervision - A case study

NASA Astrophysics Data System (ADS)

Pathirana, Assela

2010-05-01

UNESCO-IHE's students are unique in several aspects: they are mid-career professionals separated from their last university experience by a number of years in the profession, they are from diverse social and cultural backgrounds, and they often have relatively clear understanding on the diverse problems in the practice of engineering in their respective countries and are focused on solving those. As a result of the diversity in many forms, managing effective groups during the research phase of the UNESCO-IHE master's course pose considerable challenge. In this paper, we present a unique combination of tools and approaches that are employed in managing a small group of students (between five and ten) in one study area, who were working on diverse research topics that had the common denominator of mathematical modelling. We blend a number of traditional (e.g. seminars, group discussions, focused training sessions) and non-traditional (e.g. Using collaboration platforms like WIKI, peer-learning) approaches so that the cohesion of the group in maintained and every member benefits from being a part of the group. Four years of experience with employing this blend of tools on a six-month long master's research programme showed us: The approach motivates the students to perform focusing not only on the end-goal of their research study, but on the process of day to day work that lead to that goal. The students' self-confidence is often enhanced by being a part of close-knit group. Initial workload of the teacher increases significantly by this approach, but later this is more than compensated by the fact that the teacher has to do little maintain the momentum. Both strong and not so-strong students equally benefit from the approach. A significant number of students develop a keen interest in being involved in research further. (e.g. engaging in doctoral studies.)

Envisioning successful teamwork: An exploratory qualitative study of team processes used by nursing teams in a paediatric hospital unit.

PubMed

Whitehair, Leeann; Hurley, John; Provost, Steve

2018-06-12

To explore how team processes support nursing teams in hospital units during every day work. Due to their close proximity to patients, nurses are central to the process of maintaining patient safety. Globally, changes in models of care delivery by nurses, inclusive of team nursing are being considered. This qualitative study used purposive sampling in a single hospital and participants were nurses employed to work on a paediatric unit. Data was collected using non-participant observation. Thematic analysis was used to analyse and code data to create themes. Three clear themes emerged. Theme 1:"We are a close knit team"; Behaviours building a successful team"- outlines expectations regarding how members are to behave when establishing, nurturing and managing a team. Theme 2: "Onto it"; Ways of interacting with each other" - Identifies the expected pattern of relating within the team which contribute to shared understanding and actions. Theme 3: "No point in second guessing"; Maintaining a global view of the unit" - focuses on the processes for monitoring and reporting signals that team performance is on course or breaking down and includes accepting responsibility to lead the team and team members having a widespread sensitivity to what needs to happen. Essential to successful teamwork is the interplay and mutuality of team members and team leaders. Leadership behaviours exhibited in this study provide useful insights to how informal and shared or distributed leadership of teams may be achieved. Without buy-in from team members, teams may not achieve successful desired outcomes. It is not sufficient for teams to rely on current successful outcomes, as they need to be on the look-out for new ways to ensure that they can anticipate possible risks or threats to the team before harm is done. This article is protected by copyright. All rights reserved. This article is protected by copyright. All rights reserved.

VIEW LOOKING WEST DOWN TRACKS WITH OPEN HEARTH ON THE ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

VIEW LOOKING WEST DOWN TRACKS WITH OPEN HEARTH ON THE RIGHT FOREGROUND AND BRICK POWER HOUSE TO LEFT, BLOOMING MILL IN BACKGROUND. - Pittsburgh Steel Company, Monessen Works, Open Hearth Plant, Donner Avenue, Monessen, Westmoreland County, PA

Reliable early opening strength for concrete pavements and patch work

DOT National Transportation Integrated Search

2016-06-01

Early opening strengths for concrete vary greatly around the country for many different reasons. DOTD specifies early opening strengths and will benefit from understanding the latest thinking and practices adopted by similar agencies. Knowing the bes...

Open Source in Higher Education: Towards an Understanding of Networked Universities

ERIC Educational Resources Information Center

Quint-Rapoport, Mia

2012-01-01

This article addresses the question of understanding more about networked universities by looking at open source software developers working in academic contexts. It sketches their identities and work as an emerging professional community that both relies upon and develops digitally mediated networks and contributes to the progress of academic…

Using Peer Feedback to Promote Reflection on Open-Ended Problems

ERIC Educational Resources Information Center

Reinholz, Daniel L.; Dounas-Frazer, Dimitri R.

2016-01-01

This paper describes a new approach for learning from homework called Peer-Assisted Reflection (PAR). PAR involves students using peer feedback to improve their work on open-ended homework problems. Collaborating with peers and revising one's work based on the feedback of others are important aspects of doing and learning physics. While notable…

Proteus in a Kaleidoscope: The Educational Technologist in Open University Course Production.

ERIC Educational Resources Information Center

Gale, Janet

1980-01-01

Describes the educational technologist's work in Open University course production in terms of the work's context and the potential roles and tasks that may be assumed, and concludes that the educational technologist must continually construct and reconstruct his/her own role according to a number of sets of criteria. (Author/CMV)

An open science approach to modeling and visualizing ...

EPA Pesticide Factsheets

It is expected that cyanobacteria blooms will increase in frequency, duration, and severity as inputs of nutrients increase and the impacts of climate change are realized. Partly in response to this, federal, state, and local entities have ramped up efforts to better understand blooms which has resulted in new life for old datasets, new monitoring programs, and novel uses for non-traditional sources of data. To fully benefit from these datasets, it is also imperative that the full body of work including data, code, and manuscripts be openly available (i.e., open science). This presentation will provide several examples of our work which occurs at the intersection of open science and research on cyanobacetria blooms in lakes and ponds. In particular we will discuss 1) why open science is particularly important for environmental human health issues; 2) the lakemorpho and elevatr R packages and how we use those to model lake morphometry; 3) Shiny server applications to visualize data collected as part of the Cyanobacteria Monitoring Collaborative; and 4) distribution of our research and models via open access publications and as R packages on GitHub. Modelling and visualizing information on cyanobacteria blooms is important as it provides estimates of the extent of potential problems associated with these blooms. Furthermore, conducting this work in the open allows others to access our code, data, and results. In turn, this allows for a greater impact because the

SOFIA Closed- and Open-Door Aerodynamic Analyses

NASA Technical Reports Server (NTRS)

Cumming, Stephen; Frederick, Mike; Smith, Mark

2012-01-01

Work to evaluate the aerodynamic characteristics and the cavity acoustic environment of the SOFIA (Stratospheric Observatory for Infrared Astronomy) airplane has been completed. The airplane has been evaluated in its closed-door configuration, as well as several open-door configurations. Work performed included: acoustic analysis tool development, cavity acoustic evaluation, stability and control parameter estimation, air data calibration, and external flow evaluation. Qualitative airflow data were obtained during the closed- and open-door flights using tufts on the aft portion of the fuselage. Video was taken from a chase plane. This video was analyzed for various flight conditions, and general flow descriptions of the aft fuselage of the 747SP were developed for the different closed and open door configurations.

8. VIEW OF OPEN HEARTH NO. 5 FROM THE HOMESTEAD ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

8. VIEW OF OPEN HEARTH NO. 5 FROM THE HOMESTEAD HIGH LEVEL BRIDGE. NO. 2 FORGE SHOP IS VISIBLE ON THE RIGHT - U.S. Steel Homestead Works, Open Hearth Steelmaking Plant, Along Monongahela River, Homestead, Allegheny County, PA

9. VIEW OF OPEN HEARTH NO. 5 FROM THE HOMESTEAD ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

9. VIEW OF OPEN HEARTH NO. 5 FROM THE HOMESTEAD HIGH LEVEL BRIDGE. NO. 2 FORGE SHOP IS VISIBLE ON THE RIGHT. - U.S. Steel Homestead Works, Open Hearth Steelmaking Plant, Along Monongahela River, Homestead, Allegheny County, PA

Hemodialysis Catheters: How to Keep Yours Working Well

MedlinePlus

... Catheters have two openings inside; one is a red (arterial) opening to draw blood from your vein and out of your body into the dialysis pathway and the other is a blue (venous) opening that allows cleaned blood to return ...

Defining Openness: Updating the Concept of "Open" for a Connected World

ERIC Educational Resources Information Center

McAndrew, Patrick

2010-01-01

The release of free resources by the education sector has led to reconsideration of how the open approach implied by Open Educational Resources (OER) impacts on the educator and the learner. However this work has tended to consider the replication of standard campus based approaches and the characteristics of content that will encourage other…

The Open Learning Object Model to Promote Open Educational Resources

ERIC Educational Resources Information Center

Fulantelli, Giovanni; Gentile, Manuel; Taibi, Davide; Allegra, Mario

2008-01-01

In this paper we present the results of research work, that forms part of the activities of the EU-funded project SLOOP: Sharing Learning Objects in an Open Perspective, aimed at encouraging the definition, development and management of Open Educational Resources based on the Learning Object paradigm (Wiley, 2000). We present a model of Open…

The Need for Participation in Open and Distance Education: The Open University Malaysia Experience

ERIC Educational Resources Information Center

Raghavan, Santhi; Kumar, P. Rajesh

2007-01-01

This paper provides an overview of adult learner participation in open and distance education by focusing participation needs based on selected socio-demographic variables such as age, years of working experience and monthly income. The related study involved a sample of 454 Open University Malaysia students from a number of learning centres…