Introduction of a fresh cadaver laboratory during the surgery clerkship improves emergency technical skills.

PubMed

Nematollahi, Saman; Kaplan, Stephen J; Knapp, Christopher M; Ho, Hang; Alvarado, Jared; Viscusi, Rebecca; Adamas-Rappaport, William

2015-08-01

Student acquisition of technical skills during the clinical years of medical school has been steadily declining. To address this issue, the authors instituted a fresh cadaver-based Emergency Surgical Skills Laboratory (ESSL). Sixty-three medical students rotating through the third-year surgery clerkship participated in a 2-hour, fresh cadaver-based ESSL conducted during the first 2 days of the clerkship. The authors evaluated students utilizing both surgical skills and written examination before the ESSL and at 4 weeks post ESSL. Students demonstrated a mean improvement of 64% (±11) (P < .001) and 38% (±17) (P < .001) in technical skills and clinical knowledge, respectively. When technical skills were compared between cohorts, there were no differences observed in both pre- and post-testing (P = .08). A fresh cadaver laboratory is an effective method to provide proficiency in emergency technical skills not acquired during the clinical years of medical school. Copyright © 2015 Elsevier Inc. All rights reserved.

Peer Learning in an Introductory Programming Course.

ERIC Educational Resources Information Center

Lippert, Susan K.; Granger, Mary J.

The role of Information Systems within organizations is constantly changing. Undergraduates concentrating in Information Systems need to acquire the knowledge and skills to compete in this dynamic arena. The undergraduate curriculum must not only address technical knowledge, but also communications and collaborative skills necessary for…

Technical Skill, Industry Knowledge and Experience, and Interpersonal Skill Competencies for Fashion Design Careers: A Comparison of Perspectives between Fashion Industry Professionals and Fashion Educators

ERIC Educational Resources Information Center

Yang, Eunyoung

2010-01-01

In updating fashion and apparel related design programs, many educators are striving to address the perspective of the fashion industry to obtain the career-specific skill and knowledge requirements sought by employers when hiring college or university graduates. Identifying such competencies from the view of fashion industry professionals as well…

The Educational and Technical Courses in the ELT Program in Turkey: Do They Contribute to ICT Skills?

ERIC Educational Resources Information Center

Uzun, Levent

2016-01-01

The present study investigated the contribution of the educational and technical courses in the English Language Teacher Training Program (ELTTP) at universities in Turkey to the information and communication technologies (ICT) knowledge and skills of the students. The participants were 74 teachers/trainees who were attending their last year in…

Positioning Research and Practice in Career and Technical Education: A Framework for College and Career Preparation in the 21st Century

ERIC Educational Resources Information Center

Rojewski, Jay W.; Hill, Roger B.

2014-01-01

Workforce preparation, including Career and Technical Education (CTE), provides opportunities for people to become successful participants in the global workplace. To accomplish this purpose, people must be equipped with knowledge and skills necessary to fulfill personal interests and goals, develop leadership skills, and become qualified and…

Elements of Emotional Intelligence that Facilitate Exper-to-Peer Tacit Knowledge Transfer

ERIC Educational Resources Information Center

Berry, Catherine M.

2010-01-01

The purpose of this quantitative study was to compare the emotional intelligence competencies of a group of technical experts with high skills in problem-solving, leadership and mentoring (Group A) with a group of technical experts with lower skills in problem solving, leadership, and mentoring (Group B) at a semiconductor manufacturing factory in…

Identifying Students' Difficulties When Learning Technical Skills via a Wireless Sensor Network

ERIC Educational Resources Information Center

Wang, Jingying; Wen, Ming-Lee; Jou, Min

2016-01-01

Practical training and actual application of acquired knowledge and techniques are crucial for the learning of technical skills. We established a wireless sensor network system (WSNS) based on the 5E learning cycle in a practical learning environment to improve students' reflective abilities and to reduce difficulties for the learning of technical…

Executive Perceptions of the Top 10 Soft Skills Needed in Today's Workplace

ERIC Educational Resources Information Center

Robles, Marcel M.

2012-01-01

Hard skills are the technical expertise and knowledge needed for a job. Soft skills are interpersonal qualities, also known as people skills, and personal attributes that one possesses. Business executives consider soft skills a very important attribute in job applicants. Employers want new employees to have strong soft skills, as well as hard…

Efficacy of simulation-based trauma team training of non-technical skills. A systematic review.

PubMed

Gjeraa, K; Møller, T P; Østergaard, D

2014-08-01

Trauma resuscitation is a complex situation, and most organisations have multi-professional trauma teams. Non-technical skills are challenged during trauma resuscitation, and they play an important role in the prevention of critical incidents. Simulation-based training of these is recommended. Our research question was: Does simulation-based trauma team training of non-technical skills have effect on reaction, learning, behaviour or patient outcome? The authors searched PubMed, EMBASE and the Cochrane Library and found 13 studies eligible for analysis. We described and compared the educational interventions and the evaluations of effect according to the four Kirkpatrick levels: reaction, learning (knowledge, skills, attitudes), behaviour (in a clinical setting) and patient outcome. No studies were randomised, controlled and blinded, resulting in a moderate to high risk of bias. The multi-professional trauma teams had positive reactions to simulation-based training of non-technical skills. Knowledge and skills improved in all studies evaluating the effect on learning. Three studies found improvements in team performance (behaviour) in the clinical setting. One of these found difficulties in maintaining these skills. Two studies evaluated on patient outcome, of which none showed improvements in mortality, complication rate or duration of hospitalisation. A significant effect on learning was found after simulation-based training of the multi-professional trauma team in non-technical skills. Three studies demonstrated significantly increased clinical team performance. No effect on patient outcome was found. All studies had a moderate to high risk of bias. More comprehensive randomised studies are needed to evaluate the effect on patient outcome. © 2014 The Acta Anaesthesiologica Scandinavica Foundation. Published by John Wiley & Sons Ltd.

Lessons from Successes in Medical Communication Training and Their Applications to Accounting Education

ERIC Educational Resources Information Center

Daff, Lyn

2012-01-01

Accountants interact with people from diverse backgrounds. While accounting knowledge and technical skills are essential, it is well-developed interpersonal skills that will enhance their relationships with clients and staff alike. Similarly, patients want their doctors to have extensive medical knowledge and an agreeable bedside manner. To…

Addiction Counseling Competencies: The Knowledge, Skills, and Attitudes of Professional Practice. Technical Assistance Publication Series.

ERIC Educational Resources Information Center

1999

This document presents knowledge, skills, and attitudes that are needed for achieving and practicing the competencies listed in Addiction Counseling Competencies, as written by the National Curriculum Committee of the Addiction Technology Transfer Center Program. The document is intended to provide guidance for the professional treatment of…

Learning Styles of ICT Specialisation Students: Do Differences in Disciplines Exist?

ERIC Educational Resources Information Center

de Salas, Kristy; Lewis, Ian; Dermoudy, Julian

2014-01-01

Within existing ICT degrees there is a widely-held belief that content must be tailored for different "kinds" of students--often two differing student groups: a technical group requiring detailed Computer Science knowledge and a separate group requiring less technical, more strategic ICT knowledge and skills. Our institution has produced…

29 CFR 29.4 - Criteria for apprenticeable occupations.

Code of Federal Regulations, 2011 CFR

2011-07-01

... by industry and which must: (a) Involve skills that are customarily learned in a practical way... technical skills and knowledge which, in accordance with the industry standard for the occupation, would...

The Future Cybersecurity Workforce: Going Beyond Technical Skills for Successful Cyber Performance.

PubMed

Dawson, Jessica; Thomson, Robert

2018-01-01

One of the challenges in writing an article reviewing the current state of cyber education and workforce development is that there is a paucity of quantitative assessment regarding the cognitive aptitudes, work roles, or team organization required by cybersecurity professionals to be successful. In this review, we argue that the people who operate within the cyber domain need a combination of technical skills, domain specific knowledge, and social intelligence to be successful. They, like the networks they operate, must also be reliable, trustworthy, and resilient. Defining the knowledge, skills, attributes, and other characteristics is not as simple as defining a group of technical skills that people can be trained on; the complexity of the cyber domain makes this a unique challenge. There has been little research devoted to exactly what attributes individuals in the cyber domain need. What research does exist places an emphasis on technical and engineering skills while discounting the important social and organizational influences that dictate success or failure in everyday settings. This paper reviews the literature on cyber expertise and cyber workforce development to identify gaps and then argues for the important contribution of social fit in the highly complex and heterogenous cyber workforce. We then identify six assumptions for the future of cybersecurity workforce development, including the requirement for systemic thinkers, team players, a love for continued learning, strong communication ability, a sense of civic duty, and a blend of technical and social skill. Finally, we make recommendations for social and cognitive metrics which may be indicative of future performance in cyber work roles to provide a roadmap for future scholars.

Non-Technical Skills in Undergraduate Degrees in Business: Development and Transfer

ERIC Educational Resources Information Center

Jackson, Denise; Hancock, Phil

2010-01-01

The development of discipline-specific skills and knowledge is no longer considered sufficient in graduates of Bachelor level degrees in Business. Higher education providers are becoming increasingly responsible for the development of a generic skill set deemed essential in undergraduates. This required skill set comprises a broad range of…

Intensive skills week for military medical students increases technical proficiency, confidence, and skills to minimize negative stress.

PubMed

Mueller, Genevieve; Hunt, Bonnie; Wall, Van; Rush, Robert; Molof, Alan; Schoeff, Jonathan; Wedmore, Ian; Schmid, James; Laporta, Anthony

2012-01-01

The effects of stress induced cortisol on learning and memory is well documented in the literature.1-3 Memory and learning are enhanced at low levels while high levels are detrimental. Repetitive training in stressful situations enables management of the stress response4 as demonstrated by the high intensity training military members undergo to prepare for tactical situations. Appropriate management of one?s stress response is critical in the medical field, as the negative effects of stress can potentially hinder life-saving procedures and treatments. This also applies to physicians-in-training as they learn and practice triage, emergency medicine, and surgical skills prior to graduation. Rocky Vista University?s Military Medicine Honor?s Track (MMHT) held a week long high-intensity emergency medicine and surgical Intensive Skills Week (ISW), facilitated by military and university physicians, to advance students? skills and maximize training using the Human Worn Partial Surgical Task Simulator (Cut Suit). The short-term goal of the ISW was to overcome negative stress responses to increase confidence, technical and non-technical knowledge, and skill in surgery and emergency medicine in an effort to improve performance as third-year medical students. The long-term goal was to enhance performance and proficiency in residency and future medical practice. The metrics for the short-term goals were the focus of this pilot study. Results show an increase in confidence and decrease in perceived stress as well as statistically significant improvements in technical and non-technical skills and surgical instrumentation knowledge throughout the week. There is a correlative benefit to physician and non-physician military personnel, especially Special Operations Forces (SOF) medical personnel, from developing and implementing similar training programs when live tissue or cadaver models are unavailable or unfeasible. 2012.

Physics Doctorates: Skills Used & Satisfaction with Employment. Data from the Degree Recipient Follow-Up Survey for the Classes of 2013 and 2014. Focus On

ERIC Educational Resources Information Center

Pold, Jack; Mulvey, Patrick

2016-01-01

By the time people earn physics PhDs, they have learned a great deal about physics and how research is conducted. However, physics PhDs also develop skills and knowledge in a number of related areas, such as advanced mathematics, programming, modeling, and technical writing. Physics PhDs draw upon an arsenal of skills and knowledge in their…

NASA/DOD Aerospace Knowledge Diffusion Research Project. Report 28: The technical communication practices of aerospace engineering and science students: Results of the phase 4 cross-national surveys

NASA Technical Reports Server (NTRS)

Pinelli, Thomas E.; Hecht, Laura M.; Barclay, Rebecca O.; Kennedy, John M.

1994-01-01

This report describes similarities and differences between undergraduate and graduate aerospace engineering and science students in the context of two general aspects of the educational experience. First, we explore the extent to which students differ regarding the factors that lead to the choice of becoming an aerospace engineer or a scientist, current satisfaction with that choice, and career-related goals and objectives. Second, we look at the technical communication skills, practices, habits, and training of aerospace engineering and science students. The reported data were obtained from a survey of students enrolled in aerospace engineering and science programs at universities in India, Japan, Russia, and the United Kingdom. The surveys were undertaken as part of the NASA/DOD Aerospace Knowledge Diffusion Research Project. Data are reported for the following categories: student demographics; skill importance, skill training, and skill helpfulness; collaborative writing; computer and information technology use and importance, use of electronic networks; use and importance of libraries and library services; use and importance of information sources and products; use of foreign language technical reports; and foreign language (reading and speaking) skills.

Employment Opportunities and Job Analysis for Selected Environmental Occupations.

ERIC Educational Resources Information Center

Stitt, Thomas R.

Clusters of environmental occupations have been surveyed to identify and describe those occupations at the professional, technical, skilled, semi-skilled, and unskilled levels. The duties and responsibilities, special knowledge, and special skills required are listed for each. Occupational clusters covered are (1) applied biological and…

NASA/DOD Aerospace Knowledge Diffusion Research Project. Report 26: The technical communication practices of aerospace engineering students: Results of the phase 3 AIAA National Student Survey

NASA Technical Reports Server (NTRS)

Pinelli, Thomas E.; Hecht, Laura M.; Barclay, Rebecca O.; Kennedy, John M.

1994-01-01

This report describes similarities and differences between undergraduate and graduate engineering students in the context of two general aspects of the educational experience. First, we explore the extent to which students differ regarding the factors that lead to the choice of becoming an engineer, current satisfaction with that choice, and career-related goals and objectives. Second, we look at the technical communication practices, habits, and training of aerospace engineering students. The reported data were obtained from a survey of student members of the American Institute of Aeronautics and Astronautics (AIAA). The survey was undertaken as a phase 3 activity of the NASA/DoD Aerospace Knowledge Diffusion Research Project. Data are reported for the following categories: student demographics; skill importance, skill training, and skill helpfulness; collaborative writing; computer and information technology use and importance; use of electronic networks; use and importance of libraries and library services; use and importance of information sources and products; use of foreign language technical reports; and foreign language (reading and speaking) skills.

An Interesting Review on Soft Skills and Dental Practice

PubMed Central

Ishaquddin, Syed; Ghadage, Mahesh; Hatte, Geeta

2015-01-01

In today’s world of education, we concentrate on teaching activities and academic knowledge. We are taught to improve our clinical skills. Soft skills refer to the cluster of personality traits, social graces, and personal habits, facility with language, friendliness and personal habits that mark people to varying degrees. Soft Skills are interpersonal, psychological, self-promoted and non-technical qualities for every practitioner and academician, whereas hard skills are new tools or equipment and professional knowledge. Hence, more and more clinicians now days consider soft skills as important job criteria. An increase in service industry and competitive practices emphasizes the need for soft skills. Soft Skills are very important and useful in personal and professional life. PMID:25954720

An interesting review on soft skills and dental practice.

PubMed

Dalaya, Maya; Ishaquddin, Syed; Ghadage, Mahesh; Hatte, Geeta

2015-03-01

In today's world of education, we concentrate on teaching activities and academic knowledge. We are taught to improve our clinical skills. Soft skills refer to the cluster of personality traits, social graces, and personal habits, facility with language, friendliness and personal habits that mark people to varying degrees. Soft Skills are interpersonal, psychological, self-promoted and non-technical qualities for every practitioner and academician, whereas hard skills are new tools or equipment and professional knowledge. Hence, more and more clinicians now days consider soft skills as important job criteria. An increase in service industry and competitive practices emphasizes the need for soft skills. Soft Skills are very important and useful in personal and professional life.

An approach to developing independent learning and non-technical skills amongst final year mining engineering students

NASA Astrophysics Data System (ADS)

Knobbs, C. G.; Grayson, D. J.

2012-06-01

There is mounting evidence to show that engineers need more than technical skills to succeed in industry. This paper describes a curriculum innovation in which so-called 'soft' skills, specifically inter-personal and intra-personal skills, were integrated into a final year mining engineering course. The instructional approach was designed to promote independent learning and to develop non-technical skills, essential for students on the threshold of becoming practising engineers. Three psychometric tests were administered at the beginning of the course to make students aware of their own and their classmates' characteristics. Substantial prescribed reading assignments preceded weekly group discussions. Several projects during the course required team work skills and application of content knowledge to real-world contexts. Results obtained from students' reflection papers, assignments related to 'soft' skills and end of course evaluations suggest that students' appreciation of the need for these skills, as well as their own perceived competence, increased during the course. Their ability to function as independent learners also increased.

Recent Physics Doctorates: Skills Used & Satisfaction with Employment. Data from the Degree Recipient Follow-Up Survey for the Classes of 2009 and 2010. Focus On

ERIC Educational Resources Information Center

Anderson, Garrett; Mulvey, Patrick

2013-01-01

By the time people earn physics PhDs, they have learned a great deal about physics and how research is conducted. However, physics PhDs also develop skills and knowledge in a number of related areas, such as advanced mathematics, programming, modeling, and technical writing. New physics PhDs draw upon an arsenal of skills and knowledge in their…

Barriers to Employment among Unemployed Drug Users: Age Predicts Severity

PubMed Central

Sigurdsson, Sigurdur Oli; Ring, Brandon M.; O’Reilly, Kristen; Silverman, Kenneth

2014-01-01

Background Drug users in treatment or exiting treatment face many barriers to employment when entering the job market, such as low levels of education and technical skills, and low levels of interpersonal skills. As a result of these and other barriers, employment rates in these groups are generally low. Objective This article examines the existence and possible predictors of specific barriers to employment related to interpersonal and technical skills in a sample of participants enrolled in a therapeutic workplace intervention for substance abuse. Methods In Study I (N = 77), we characterized and examined predictors of participant scores on a staff-rated scale of interpersonal skills (Work Behavior Inventory). In Study II (N = 29), we examined whether participants had lower levels of computer knowledge than job seekers in the general population, and investigated possible predictors of computer knowledge in the sample. Results In general, participants in Study I displayed low levels of interpersonal skills, and participants in Study II scored lower on the computer knowledge test than job seekers in the general population. Older participants tended to have lower levels of interpersonal skills and lower levels of computer knowledge. Conclusions and Scientific Significance These results suggest that providers of workforce development services for drug users in treatment or exiting treatment should attend to these specific barriers to employment, which may also be more pronounced among older clients. PMID:22242680

Determining the Critical Skills Beginning Agriculture Teachers Need to Successfully Teach Welding

ERIC Educational Resources Information Center

Pate, Michael L.; Warnick, Brian K.; Meyers, Tiffany

2012-01-01

Using the Delphi technique, agriculture teachers with significant experience teaching welding were asked to help determine the critical skills beginning agriculture teachers need to successfully teach welding. The study's objectives sought to (1) identify the knowledge and technical skill competencies that beginning agriculture teachers need to…

Spinning the Web

ERIC Educational Resources Information Center

Wiggins, Alexis

2014-01-01

Skills in communication and collaboration can be just as important as content knowledge and technical skills in the workplace. So what are schools doing to foster these skills? English language arts teacher Alexis Wiggins adapted the Socratic seminar model to make it student-led and collaborative. Under her new approach, the Spider Web…

The Boston Study: Analysis of a Major Metropolitan Business- and Technical-Communication Market.

ERIC Educational Resources Information Center

Buchholz, William J.

1989-01-01

Presents a year-long study of the duties, skills, and knowledge required of business- and technical-communication professionals in Boston, Massachusetts. Focuses on six categories of practice: technical communication, publishing, public relations, marketing, development, and training. Suggests that in the next decade communication practitioners…

V-TECS Career Cluster Frameworks.

ERIC Educational Resources Information Center

Vocational Technical Education Consortium of States, Decatur, GA.

This document includes 16 vocational-technical crosswalk wheels relating the 14 Vocational Technical Education Consortium of States (V-TECS) Career Families to the 16 Career Clusters developed by the U.S. Department of Education. The career clusters are based on the common academic, workplace, and technical knowledge and skills that cut across all…

The Development of Skill and Knowledge during a Sport Education Season of Track and Field Athletics

ERIC Educational Resources Information Center

Hastie, Peter A.; Calderón, Antonio; Rolim, Ramiro J.; Guarino, Anthony J.

2013-01-01

Purpose: The purpose of this study was to examine the relative effectiveness of 2 forms of physical education instruction on students' skill and technical performance, as well as content knowledge in 3 track and field events. Method: Students from 6 classes in 3 Portuguese schools completed 900-min units conducted under the auspices of sport…

Cognitive Apprenticeship: Teaching the Craft of Reading, Writing, and Mathematics. Technical Report No. 403.

ERIC Educational Resources Information Center

Collins, Allan; And Others

Noting that skills and knowledge taught in schools have become abstracted from their uses in the world, this paper clarifies some of the implications for the nature of the knowledge that students acquire through a proposal for the retooling of apprenticeship methods for the teaching and learning of cognitive skills. The paper specifically proposes…

Allied restorative functions training in Minnesota: a case study.

PubMed

Cooper, Brigette R; Monson, Angela L

2007-03-01

In 2003, the Minnesota Dental Practice Act was modified to allow dental hygienists and assistants to place amalgam, composite, glass ionomer, and stainless steel crowns. The concept of utilizing allied professionals to perform expanded functions has been suggested as a way to increase access to care and productivity. A continuing education course was offered to provide required certification for interested dental practitioners (N=12). The objectives of this study were to examine confidence levels and effectiveness of the continuing education program. Pre- and post-course restorative content knowledge, along with confidence levels in knowledge, technical skills, and the ability to implement skills were measured. A matched pairs t-test found a significant increase in participants' restorative content knowledge (p<.001). Wilcoxen signed rank tests revealed an increase in confidence in all content knowledge (p<.01) and technical skill (p<.05) categories. Participants did not significantly increase in confidence to implement restorative functions skills into practice (p<.7). Interview data revealed that participants remain unclear about ways to incorporate restorative functions into the schedule. Findings in this case study suggest that content knowledge and confidence levels increase following completion of a restorative functions course. To improve education and training, research is needed to identify why participants' confidence in implementation did not increase.

The Future Cybersecurity Workforce: Going Beyond Technical Skills for Successful Cyber Performance

PubMed Central

Dawson, Jessica; Thomson, Robert

2018-01-01

One of the challenges in writing an article reviewing the current state of cyber education and workforce development is that there is a paucity of quantitative assessment regarding the cognitive aptitudes, work roles, or team organization required by cybersecurity professionals to be successful. In this review, we argue that the people who operate within the cyber domain need a combination of technical skills, domain specific knowledge, and social intelligence to be successful. They, like the networks they operate, must also be reliable, trustworthy, and resilient. Defining the knowledge, skills, attributes, and other characteristics is not as simple as defining a group of technical skills that people can be trained on; the complexity of the cyber domain makes this a unique challenge. There has been little research devoted to exactly what attributes individuals in the cyber domain need. What research does exist places an emphasis on technical and engineering skills while discounting the important social and organizational influences that dictate success or failure in everyday settings. This paper reviews the literature on cyber expertise and cyber workforce development to identify gaps and then argues for the important contribution of social fit in the highly complex and heterogenous cyber workforce. We then identify six assumptions for the future of cybersecurity workforce development, including the requirement for systemic thinkers, team players, a love for continued learning, strong communication ability, a sense of civic duty, and a blend of technical and social skill. Finally, we make recommendations for social and cognitive metrics which may be indicative of future performance in cyber work roles to provide a roadmap for future scholars. PMID:29946276

Surgical resident technical skill self-evaluation: increased precision with training progression.

PubMed

Quick, Jacob A; Kudav, Vishal; Doty, Jennifer; Crane, Megan; Bukoski, Alex D; Bennett, Bethany J; Barnes, Stephen L

2017-10-01

Surgical resident ability to accurately evaluate one's own skill level is an important part of educational growth. We aimed to determine if differences exist between self and observer technical skill evaluation of surgical residents performing a single procedure. We prospectively enrolled 14 categorical general surgery residents (six post-graduate year [PGY] 1-2, three PGY 3, and five PGY 4-5). Over a 6-month period, following each laparoscopic cholecystectomy, residents and seven faculty each completed the Objective Structured Assessment of Technical Skills (OSATS). Spearman's coefficient was calculated for three groups: senior (PGY 4-5), PGY3, and junior (PGY 1-2). Rho (ρ) values greater than 0.8 were considered well correlated. Of the 125 paired assessments (resident-faculty each evaluating the same case), 58 were completed for senior residents, 54 for PGY3 residents, and 13 for junior residents. Using the mean from all OSATS categories, trainee self-evaluations correlated well to faculty (senior ρ 0.97, PGY3 ρ 0.9, junior ρ 0.9). When specific OSATS categories were analyzed, junior residents exhibited poor correlation in categories of respect for tissue (ρ -0.5), instrument handling (ρ 0.71), operative flow (ρ 0.41), use of assistants (ρ 0.05), procedural knowledge (ρ 0.32), and overall comfort with the procedure (ρ 0.73). PGY3 residents lacked correlation in two OSATS categories, operative flow (ρ 0.7) and procedural knowledge (ρ 0.2). Senior resident self-evaluations exhibited strong correlations to observers in all areas. Surgical residents improve technical skill self-awareness with progressive training. Less-experienced trainees have a tendency to over-or-underestimate technical skill. Copyright © 2017 Elsevier Inc. All rights reserved.

Not just trust: factors influencing learners' attempts to perform technical skills on real patients.

PubMed

Bannister, Susan L; Dolson, Mark S; Lingard, Lorelei; Keegan, David A

2018-06-01

As part of their training, physicians are required to learn how to perform technical skills on patients. The previous literature reveals that this learning is complex and that many opportunities to perform these skills are not converted into attempts to do so by learners. This study sought to explore and understand this phenomenon better. A multi-phased qualitative study including ethnographic observations, interviews and focus groups was conducted to explore the factors that influence technical skill learning. In a tertiary paediatric emergency department, staff physician preceptors, residents, nurses and respiratory therapists were observed in the delivery and teaching of technical skills over a 3-month period. A constant comparison methodology was used to analyse the data and to develop a constructivist grounded theory. We conducted 419 hours of observation, 18 interviews and four focus groups. We observed 287 instances of technical skills, of which 27.5% were attempted by residents. Thematic analysis identified 14 factors, grouped into three categories, which influenced whether residents attempted technical skills on real patients. Learner factors included resident initiative, perceived need for skill acquisition and competing priorities. Teacher factors consisted of competing priorities, interest in teaching, perceived need for residents to acquire skills, attributions about learners, assessments of competency, and trust. Environmental factors were competition from other learners, judgement that the patient was appropriate, buy-in from team members, consent from patient or caregivers, and physical environment constraints. Our findings suggest that neither the presence of a learner in a clinical environment nor the trust of the supervisor is sufficient to ensure the learner will attempt a technical skill. We characterise this phenomenon as representing a pool of opportunities to conduct technical skills on live patients that shrinks to a much smaller pool of technical skill attempts. Learners, teachers and educators can use this knowledge to maximise the number of attempts learners make to perform technical skills on real patients. © 2018 John Wiley & Sons Ltd and The Association for the Study of Medical Education.

Practical implications of pre-employment nurse assessments.

PubMed

Kuthy, James E; Ramon, Cheree; Gonzalez, Ronald; Biddle, Dan A

2013-01-01

Hiring nurses is a difficult task that can have serious repercussions for medical facilities. If nurses without proper skills are hired, patients can suffer from insufficient quality of care and potentially life-threatening conditions. Nurse applicants' technical knowledge is extremely important to avoid negative outcomes; however, there are soft skills that factor into their success, such as bedside manner, personality, communication, and decision making. In order for medical facilities to select and maintain high-performing nurse staff, hiring managers must incorporate evaluations for these types of skills in their hiring process. The current study focused on using content/criterion-related validation design to create assessments by which nurse applicants can be evaluated for both technical knowledge/skills and soft skills. The study included participation of more than 876 nursing staff members. To rank applicants on divergent skills, 3 assessment types were investigated, resulting in the creation of an assessment with 3 components. The clinical, situational, and behavioral components that were created measure applicants' job knowledge, interpersonal competency in medical facility-related situations, and aspects of personality and behavior, respectively. Results indicate that using the assessment can predict 45% of a nurse applicant's future job performance. Practical implications include hiring and maintaining a higher quality of nurses and decreased hiring costs.

Learning Soft Skills at Work: An Interview with Annalee Luhman

ERIC Educational Resources Information Center

Davis, Barbara D.; Muir, Clive

2004-01-01

Soft skills are attitudes and behaviors displayed in interactions among individuals that affect the outcomes of such encounters. These differ from hard skills, which are the technical knowledge and abilities required to perform specific job-related tasks more formally stated in job descriptions. In the past, it was felt that managers and employees…

National Occupational Skill Standards. CADD: Computer Aided Drafting and Design.

ERIC Educational Resources Information Center

National Coalition for Advanced Manufacturing, Washington, DC.

This document identifies computer-aided drafting and design (CADD) skills that companies require of training programs and future employees. The information was developed by two committees of technically knowledgeable CADD users from across the United States and validated by several hundred other CADD users. The skills are aimed at a beginner CADD…

A Career-Oriented Foreign Language Program for Keystone Oaks School District, Pittsburgh, Pennsylvania.

ERIC Educational Resources Information Center

Grubesky, Marcia R.

A career-oriented foreign language program is discussed that takes into account marketable skills of foreign language majors for a number of careers. The program is threefold. First, it recognizes the need for language skills to supplement technical, business, and professional skills to expand educational knowledge; capabilities in diplomacy and…

Skilling for the Workforce: A Tertiary Education Response to Enrich Professional Development

ERIC Educational Resources Information Center

Murphy, Gerald A.; Calway, Bruce A.

2008-01-01

Tertiary educators are being directed by government policy: to develop a learning environment where participants become more than passive receivers of knowledge and to skill the workforce through technical skills and competency-based education. Professional development is needed for compliance, and to develop and maintain generic, productivity,…

Learning to Become a Professional Orchestral Musician: Going beyond Skill and Technique

ERIC Educational Resources Information Center

Hager, Paul; Johnsson, Mary C.

2009-01-01

Current theories of learning hold dominant assumptions about the type and scope of knowledge and skills taught in formal courses that prepare novices for professional practice at work. In performing arts educational contexts, a common emphasis continues to hone individual performance skills in order to gain technical mastery and to differentiate…

TECHNICAL MANPOWER IN NEW YORK STATE. VOLUME II.

ERIC Educational Resources Information Center

AMATULLI, ANGELO; AND OTHERS

THE JOB CONTENT OF THE TECHNICAL OCCUPATIONS AND THE TECHNICAL SKILLS AND SUBJECT MATTER KNOWLEDGES REQUIRED ARE BASED PRIMARILY ON INFORMATION SUPPLIED BY EMPLOYERS FROM 17,414 ESTABLISHMENTS IN NEW YORK STATE. DATA ARE ALSO GIVEN ON GRADE STRUCTURE, EDUCATION AND EXPERIENCE REQUIREMENTS, TESTS AND LICENSES REQUIRED FOR THE JOB, SOURCES OF…

How to develop and write a case for technical writing

NASA Technical Reports Server (NTRS)

Couture, B.; Goldstein, J.

1981-01-01

Case of different sizes and shapes for teaching technical writing to engineers at Wayne State University have been developed. The case approach was adopted for some assignments because sophomores and juniors lacked technical expertise and professional knowledge of the engineering world. Cases were found to be good exercises, providing realistic practice in specific writing tasks or isolating particular skills in the composing process. A special kind of case which narrates the experiences of one technical person engaged in the problem-solving process in a professional rhetorical situation was developed. This type of long, realistic fiction is called a an "holistic" case. Rather than asking students to role-play a character, an holistic case realistically encompasses the whole of the technical writing process. It allows students to experience the total communication act in which the technical task and data are fully integrated into the rhetorical situation and gives an opportunity to perform in a realistic context, using skills and knowledge required in communication on the job. It is believed that the holistic case most fully exploits the advantages of the case method for students of professional communication.

Bench model surgical skill training improves novice ability to multitask: a randomized controlled study.

PubMed

Grierson, Lawrence; Melnyk, Megan; Jowlett, Nathan; Backstein, David; Dubrowski, Adam

2011-01-01

Skills training in simulation laboratories is becoming increasingly common. However, the educational benefit of these laboratories remains unclear. This study examined whether such training enables better performance on the simultaneous execution of technical skill and knowledge retention. Twenty-four novice trainees completed the elliptical excision on baseline testing. Following baseline testing twelve of the novices completed a technical practice (simulation training group) session, while the other twelve did not (control group). One week later, all participants returned for dual-task follow up testing in which they performed the excision while listening to a didactic lesson on the staging and treatment of cutaneous melanoma. The dual-tasking during the post test was standardized, whereby excision sutures 3 and 5 were performed alone (single), and sutures 4 and 6 were performed concurrently with the didactic lecture (dual). Seven additional trainees also participated as controls that were randomized to listen to the didactic lesson alone (knowledge retention alone group). Knowledge retention was assessed by a multiple choice questionnaire (MCQ). Technical performance was evaluated with computer and expert-based measures. Time to complete the performance improved among both groups completing the elliptical excision on follow-up testing (p<0.01). The simulation training group demonstrated superior hand motion performance on simultaneous didactic lesson testing (p<0.01). Novices from the no-training group performed statistically worse while suturing concurrently with the didactic lesson (p<0.01). The pretraining of novices in surgical skills laboratories leads to improved technical performance during periods of increased attention demands.

Core trainee boot camp-A method for improving technical and non-technical skills of novice surgical trainees. A before and after study.

PubMed

Bamford, R; Langdon, L; Rodd, C A; Eastaugh-Waring, S; Coulston, J E

2018-04-10

The transition to surgical training can be a stressful time for trainees and is most evident during national handover periods where new graduates start and senior trainees rotate to new programmes. During this time, patient mortality can increase and Hospital efficiency reduces. This influence is compounded by the impact of working time directives. Intensive, simulation rich training programmes or "Boot Camps" have been postulated as a solution. This article highlights the development of a surgical boot camp for novice surgical trainees and the impact this can have on training. A novel surgical boot camp was developed for all trainees within a surgical training region including nine acute NHS trusts. Participating cohort of trainees completed pre and post course questionnaires to assess technical and non-technical skills. 25 trainees attended and completed the pre and post boot camp questionnaire. Significant improvements were seen with technical skills (p = 0.0429), overall non-technical skills (p < 0.001) including leadership (p = 0.022), communication (p = 0.010), situational awareness (p = 0.022), patient handover (p = 0.003), ward round skills (p = 0.005) and outpatient skill (p = 0.002). Trainees reported significantly increased ability to assess and manage a critically unwell patient (p = 0.001) and a trauma patient (p = 0.001). 96% of trainees have utilised the skills they learnt on Boot Camp and all trainees would recommend it as an induction programme. Surgical Boot Camps offer a timely chance to develop technical and non-technical skills whilst enhancing a trainee's confidence and knowledge and reduce the patient safety impact of the handover period. Copyright © 2018. Published by Elsevier Ltd.

Health information technology knowledge and skills needed by HIT employers.

PubMed

Fenton, S H; Gongora-Ferraez, M J; Joost, E

2012-01-01

To evaluate the health information technology (HIT) workforce knowledge and skills needed by HIT employers. Statewide face-to-face and online focus groups of identified HIT employer groups in Austin, Brownsville, College Station, Dallas, El Paso, Houston, Lubbock, San Antonio, and webinars for rural health and nursing informatics. HIT employers reported needing an HIT workforce with diverse knowledge and skills ranging from basic to advanced, while covering information technology, privacy and security, clinical practice, needs assessment, contract negotiation, and many other areas. Consistent themes were that employees needed to be able to learn on the job and must possess the ability to think critically and problem solve. Many employers wanted persons with technical skills, yet also the knowledge and understanding of healthcare operations. The HIT employer focus groups provided valuable insight into employee skills needed in this fast-growing field. Additionally, this information will be utilized to develop a statewide HIT workforce needs assessment survey.

NASA/DOD Aerospace Knowledge Diffusion Research Project. Report 27: The technical communication practices of engineering and science students: Results of the phase 3 academic surveys

NASA Technical Reports Server (NTRS)

Pinelli, Thomas E.; Barclay, Rebecca O.; Hecht, Laura M.; Kennedy, John M.

1994-01-01

This report describes similarities and differences between undergraduate and graduate engineering science students in the context of two general aspects of the educational experience. First, we explore the extent to which students differ regarding the factors that lead to the choice of becoming an engineer or a scientist, current satisfaction with that choice, and career-related goals and objectives. Second, we look at the technical communication practices, habits, and training of engineers and science (Physics) students. The reported data were obtained from a survey of students enrolled in the College of Engineering at the University of Illinois at Urbana-Champaign, Bowling Green State University, and Texas A&M University. The survey was undertaken as part of the NASA/DOD Aerospace Knowledge Diffusion Research Project. Data are reported for the following categories: student demographics; skill importance, skill training, and skill helpfulness; collaborative writing; computer and information technology use and importance, use of electronic networks; use and importance of libraries and library services; use and importance of information sources and products; use of foreign technical reports; and foreign language (reading and speaking) skills.

On-line Naval Engineering Skills Supplemental Training Program

DTIC Science & Technology

2010-01-01

Defense Technical University ( DTU ), the technical content for courses would have to be provided by the Naval technical authorities...of technological knowledge related to design engineering such as the DTU , or expanded within the mission scope of an existing organization such as...management program as a training tool for naval design engineers such as the DTU or a technical extension of the DAU program for acquisition training

Female and Male Interns and Their Mentors? Perception of Workforce Skill Development

NASA Technical Reports Server (NTRS)

Hall, Cathy W.; Pinelli, Thomas E.; Brush, Kimberly M.

2013-01-01

Participants in this study were student interns and mentors taking part in the 2012, 10- week Langley Aerospace Research Student Scholars (LARSS) summer internship program in Hampton, Virginia. The study examined mentors and student interns' ratings of their preparedness in basic knowledge and skills. The study focused on three primary areas: 1) overall evaluation of knowledge and skills by mentors and interns; 2) male and female interns' perceptions of their own skills in these key areas; and 3) mentors' perceptions of their student interns' knowledge and skills in the same areas by gender. Overall mentors were more positive about their interns' improvement in 12 of 17 areas assessed than were the student interns. There were no significant gender differences in how mentors rated their male and female interns' abilities in these workforce skills, but there were four key areas where female interns rated their own abilities lower than did their male peers: analytical thinking, computational skills, computer skills and technical skills. Implications of these findings are discussed.

An Exploratory Investigation of Requisite Skills Needed by Developers of E-Commerce Systems.

ERIC Educational Resources Information Center

Aladwani, Adel M.

The aim of this exploratory study is to identify the skills needed by developers of Electronic Commerce (e-Commerce) systems. The paper proposes a framework pertaining to three categories of e-Commerce development knowledge: technical, human, and organizational. The initial findings reveal that there are some 16 possible e-Commerce skills tapping…

Radio Frequency Identification (RFID) for Naval Medical Treatment Facilities (MTF)

DTIC Science & Technology

2006-09-01

education and develop my technical knowledge in the field of Information Technology Management. The skills and understanding I gained from my...place, preventing the need for manipulation. The passes can also be used to locate skiers in case of injuries or for the location of children. RFID...created and backed by the leaders of the industry [24]. Intellectual property, patents, 42 intimate technical knowledge and publicity are all

The Effect of an Integrated Course Cluster Learning Community on the Oral and Written Communication Skills and Technical Content Knowledge of Upper-Level College of Agriculture Students

ERIC Educational Resources Information Center

Barnett, Cynthia; Miller, Greg; Polito, Thomas A.; Gibson, Lance

2009-01-01

The purpose of this quasi-experimental study was to determine if upper-level college students who participated in AgPAQ, an integrated course cluster learning community, would demonstrate enhanced learning in the areas of oral communication, written communication, and agronomic/economic technical content knowledge. The population (N = 182)…

Credit Quandaries: How Career and Technical Education Teachers Can Teach Courses That Include Academic Credit. Ask the Team

ERIC Educational Resources Information Center

Jacques, Catherine

2014-01-01

Many career and technical education (CTE) courses not only provide students with vocational and technical skills and knowledge, but engage them in academic content as well. Designed thoughtfully, these courses can address rigorous academic content standards and be as intellectually demanding as traditional academic courses (Southern Regional…

Community and Technical Colleges at a Glance. Washington's Community and Technical Colleges

ERIC Educational Resources Information Center

Washington State Board for Community and Technical Colleges, 2015

2015-01-01

The vision of Washington State Board for Community and Technical Colleges is to build strong communities, individuals and families, and achieve a greater global competitiveness and prosperity for the state and its economy by raising the knowledge and skills of the state's residents. The most urgent mission of the Washington State Board for…

Essential managerial skills for financial and budgetary management in medical universities: The top managers' perspective

PubMed Central

Javani, Ali; Abolhallaje, Masoud; Jafari, Javad; Fazl Hashemi, Seyed Mohammad Esmaeil

2017-01-01

Background: Achieving organizational objectives depends on the effectiveness of administrators. However, managerial efficacy largely depends on the knowledge and skills of managers. This study aimed at assessing the skills of financial and budget management of the Ministry of Health from the perspective of resource development assistants of universities of medical sciences nationwide. Methods: This cross- sectional study was conducted in 2012. Study participants were resource development assistants of universities of medical sciences in Iran. We adopted simple random sampling method in locating participants. Data were collected using pretested questionnaires and analyzed using descriptive statistics and Mann-Whitney test (as a non-parametric test) and Friedman test. Results: The highest mean recorded under financial management skills was technical skills (3.58±0.50), followed by human skills (3.50±.048), and perceptual skills (3.32±0.52). With regards to financial and budget management and performance monitoring, the means of technical skills, as prioritized by directors, was 3.72±0.71, followed by human skills (3.72±0.70), and perceptual skills (3.66±0.75). A significant association was found between perceptual skills of financial managers and budgeting and performance monitoring managers (p= 0.014). Conclusion: Operational level managers, such as financial and budgetary managers, need to acquire more technical skills. Therefore, we support activities that promote technical skills and awareness of managers within organizations, such as organizational training courses and distribution of educational materials like brochures.

Hazardous Materials Technician. Technical Committee on Occupational Curriculum Development.

ERIC Educational Resources Information Center

Northern Montana Coll., Havre. Montana Center for Vocational Education, Research, Curriculum and Personnel Development.

This document describes Montana's postsecondary curriculum to prepare hazardous materials technicians. Basic general education requirements are described. The technical skills and the knowledge associated with each are listed in the following categories: (1) site assessment; (2) sampling materials; (3) handling materials; (4) recording data; (5)…

North Carolina Agricultural and Technical State University Drug Education Policy.

ERIC Educational Resources Information Center

Welborne, Sullivan; And Others

This drug education policy statement for North Carolina Agricultural and Technical State University establishes two educational objectives: to develop an educational program that increases the university community's knowledge and competency regarding controlled substances and to increase the skills required to take corrective action for potential…

Utah's 1988-93 Vocational-Technical Education Master Plan: A Powerful Resource for Human and Economic Development.

ERIC Educational Resources Information Center

Utah State Board of Higher Education, Salt Lake City.

For Utah residents to remain in the forefront or even stay competitive economically, the state's work force must acquire the knowledge and skills that match or exceed those of their most technically advanced competitors. A powerful engine for economic growth is a high-quality system of vocational-technical education. The majority of Utah public…

A Pilot Program to Provide Ownership Skills to Seniors in the Vocational Technical Schools and Other Educational Institutions, Year Two. Final Report.

ERIC Educational Resources Information Center

Norwich Regional Vocational Technical School, CT.

Responding to a Small Business Administration statement that technical school graduates lack knowledge of business principles, the Norwich (Connecticut) Regional Vocational Technical School conducted a course in small business ownership/management for all of its seniors. The required course, a fifty-four-hour module, replaced one English,…

Development and validation of trauma surgical skills metrics: Preliminary assessment of performance after training.

PubMed

Shackelford, Stacy; Garofalo, Evan; Shalin, Valerie; Pugh, Kristy; Chen, Hegang; Pasley, Jason; Sarani, Babak; Henry, Sharon; Bowyer, Mark; Mackenzie, Colin F

2015-07-01

Maintaining trauma-specific surgical skills is an ongoing challenge for surgical training programs. An objective assessment of surgical skills is needed. We hypothesized that a validated surgical performance assessment tool could detect differences following a training intervention. We developed surgical performance assessment metrics based on discussion with expert trauma surgeons, video review of 10 experts and 10 novice surgeons performing three vascular exposure procedures and lower extremity fasciotomy on cadavers, and validated the metrics with interrater reliability testing by five reviewers blinded to level of expertise and a consensus conference. We tested these performance metrics in 12 surgical residents (Year 3-7) before and 2 weeks after vascular exposure skills training in the Advanced Surgical Skills for Exposure in Trauma (ASSET) course. Performance was assessed in three areas as follows: knowledge (anatomic, management), procedure steps, and technical skills. Time to completion of procedures was recorded, and these metrics were combined into a single performance score, the Trauma Readiness Index (TRI). Wilcoxon matched-pairs signed-ranks test compared pretraining/posttraining effects. Mean time to complete procedures decreased by 4.3 minutes (from 13.4 minutes to 9.1 minutes). The performance component most improved by the 1-day skills training was procedure steps, completion of which increased by 21%. Technical skill scores improved by 12%. Overall knowledge improved by 3%, with 18% improvement in anatomic knowledge. TRI increased significantly from 50% to 64% with ASSET training. Interrater reliability of the surgical performance assessment metrics was validated with single intraclass correlation coefficient of 0.7 to 0.98. A trauma-relevant surgical performance assessment detected improvements in specific procedure steps and anatomic knowledge taught during a 1-day course, quantified by the TRI. ASSET training reduced time to complete vascular control by one third. Future applications include assessing specific skills in a larger surgeon cohort, assessing military surgical readiness, and quantifying skill degradation with time since training.

Endoscopic non-technical skills team training: the next step in quality assurance of endoscopy training.

PubMed

Matharoo, Manmeet; Haycock, Adam; Sevdalis, Nick; Thomas-Gibson, Siwan

2014-12-14

To investigate whether novel, non-technical skills training for Bowel Cancer Screening (BCS) endoscopy teams enhanced patient safety knowledge and attitudes. A novel endoscopy team training intervention for BCS teams was developed and evaluated as a pre-post intervention study. Four multi-disciplinary BCS teams constituting BCS endoscopist(s), specialist screening practitioners, endoscopy nurses and administrative staff (A) from English BCS training centres participated. No patients were involved in this study. Expert multidisciplinary faculty delivered a single day's training utilising real clinical examples. Pre and post-course evaluation comprised participants' patient safety awareness, attitudes, and knowledge. Global course evaluations were also collected. Twenty-three participants attended and their patient safety knowledge improved significantly from 43%-55% (P ≤ 0.001) following the training intervention. 12/41 (29%) of the safety attitudes items significantly improved in the areas of perceived patient safety knowledge and awareness. The remaining safety attitude items: perceived influence on patient safety, attitudes towards error management, error management actions and personal views following an error were unchanged following training. Both qualitative and quantitative global course evaluations were positive: 21/23 (91%) participants strongly agreed/agreed that they were satisfied with the course. Qualitative evaluation included mandating such training for endoscopy teams outside BCS and incorporating team training within wider endoscopy training. Limitations of the study include no measure of increased patient safety in clinical practice following training. A novel comprehensive training package addressing patient safety, non-technical skills and adverse event analysis was successful in improving multi-disciplinary teams' knowledge and safety attitudes.

Endoscopic non-technical skills team training: The next step in quality assurance of endoscopy training

PubMed Central

Matharoo, Manmeet; Haycock, Adam; Sevdalis, Nick; Thomas-Gibson, Siwan

2014-01-01

AIM: To investigate whether novel, non-technical skills training for Bowel Cancer Screening (BCS) endoscopy teams enhanced patient safety knowledge and attitudes. METHODS: A novel endoscopy team training intervention for BCS teams was developed and evaluated as a pre-post intervention study. Four multi-disciplinary BCS teams constituting BCS endoscopist(s), specialist screening practitioners, endoscopy nurses and administrative staff (A) from English BCS training centres participated. No patients were involved in this study. Expert multidisciplinary faculty delivered a single day’s training utilising real clinical examples. Pre and post-course evaluation comprised participants’ patient safety awareness, attitudes, and knowledge. Global course evaluations were also collected. RESULTS: Twenty-three participants attended and their patient safety knowledge improved significantly from 43%-55% (P ≤ 0.001) following the training intervention. 12/41 (29%) of the safety attitudes items significantly improved in the areas of perceived patient safety knowledge and awareness. The remaining safety attitude items: perceived influence on patient safety, attitudes towards error management, error management actions and personal views following an error were unchanged following training. Both qualitative and quantitative global course evaluations were positive: 21/23 (91%) participants strongly agreed/agreed that they were satisfied with the course. Qualitative evaluation included mandating such training for endoscopy teams outside BCS and incorporating team training within wider endoscopy training. Limitations of the study include no measure of increased patient safety in clinical practice following training. CONCLUSION: A novel comprehensive training package addressing patient safety, non-technical skills and adverse event analysis was successful in improving multi-disciplinary teams’ knowledge and safety attitudes. PMID:25516665

Team-Teaching a Digital Senior Capstone Project in CTE

ERIC Educational Resources Information Center

Ryan, Melanie D.; Tews, Nichole M.; Washer, Barton A.

2012-01-01

Secondary career and technical education (CTE) students are faced with the unique challenge of learning not only specific content-related knowledge and skills, but also postsecondary preparation, 21st century technology, employability and self-marketing skills. At Cass Career Center in Harrisonville, Missouri, a senior capstone project was…

Experiences of New Information Technology Managers: A Qualitative Hermeneutic Phenomenological Study of IT Managers

ERIC Educational Resources Information Center

Snyder, Walter Wesley, V.

2012-01-01

Transitioning from a technical role to a managerial role has many challenges, particularly in information technology (IT) (Lester & Parnell, 2006). These challenges include people or soft skills, language skills, knowledge, intuition, mentoring, and delegation (Brokett, 2007; Feyerherm & Rice, 2002; Lester & Parnell, 2006). The IT…

Training in Socio-Emotional Skills through On-Site Training

ERIC Educational Resources Information Center

Talavera, Elvira Repetto; Perez-Gonzalez, Juan Carlos

2007-01-01

Socio-emotional skills are highly prized on the labour market these days; many writers say that competencies of this type help to increase individuals' employability, but educational institutions consistently forget their responsibility for providing training in them. Most jobs call not only for knowledge and specific technical competencies, but…

Report of the Technical Committee for Hospitality, Tourism, Recreation.

ERIC Educational Resources Information Center

Oregon State Dept. of Education, Salem. Div. of Vocational Education.

This color-coded committee report identifies the skills and knowledge required by employees in the hospitality/tourism/recreation occupational area. The reports of four subcommittees focused on food/beverage, hotel/motel, recreation/leisure, and travel/tourism skills are also included. Introductory materials include a general statement of the…

Learning Teamwork Skills in University Programming Courses

ERIC Educational Resources Information Center

Sancho-Thomas, Pilar; Fuentes-Fernandez, Ruben; Fernandez-Manjon, Baltasar

2009-01-01

University courses about computer programming usually seek to provide students not only with technical knowledge, but also with the skills required to work in real-life software projects. Nowadays, the development of software applications requires the coordinated efforts of the members of one or more teams. Therefore, it is important for software…

Implementation of a Project-Based Telecommunications Engineering Design Course

ERIC Educational Resources Information Center

Aliakbarian, Hadi; Soh, Ping Jack; Farsi, Saeed; Xu, Hantao; Van Lil, Emmanuel H. E. M. J. C.; Nauwelaers, Bart K. J. C.; Vandenbosch, Guy A. E.; Schreurs, Dominique M. M.-P.

2014-01-01

This paper describes and discusses the implementation of a project-based graduate design course in telecommunications engineering. This course, which requires a combination of technical and soft skills for its completion, enables guided independent learning (GIL) and application of technical knowledge acquired from classroom learning. Its main…

Health Information Technology Knowledge and Skills Needed by HIT Employers

PubMed Central

Fenton, S.H.; Gongora-Ferraez, M.J.; Joost, E.

2012-01-01

Objective To evaluate the health information technology (HIT) workforce knowledge and skills needed by HIT employers. Methods Statewide face-to-face and online focus groups of identified HIT employer groups in Austin, Brownsville, College Station, Dallas, El Paso, Houston, Lubbock, San Antonio, and webinars for rural health and nursing informatics. Results HIT employers reported needing an HIT workforce with diverse knowledge and skills ranging from basic to advanced, while covering information technology, privacy and security, clinical practice, needs assessment, contract negotiation, and many other areas. Consistent themes were that employees needed to be able to learn on the job and must possess the ability to think critically and problem solve. Many employers wanted persons with technical skills, yet also the knowledge and understanding of healthcare operations. Conclusion The HIT employer focus groups provided valuable insight into employee skills needed in this fast-growing field. Additionally, this information will be utilized to develop a statewide HIT workforce needs assessment survey. PMID:23646090

[Assessment of surgical competence. A Mexican pilot study].

PubMed

Anaya-Prado, Roberto; Ortega-León, Luis Humberto; Ramirez-Solis, Mauro Eduardo; Vázquez-García, José Arturo; Medina-Portillo, Juan Bernardo; Ayala-López, Ernesto Alonso

2012-01-01

Assessment of technical dexterity is currently the weakest issue in surgical evaluation. It is imperative to develop an objective exam that allows us to correct training deficiencies and abilities and to objectively feedback education programs and hospitals. The purpose of this study was to perform a correlation between theoretical knowledge and surgical skills. We performed a national pilot study in in surgeons certifying by the Mexican Board of Surgery in 2010. This was a two-stage study: written exam (stage I) and oral exam (viva voce) to all surgeons approving the written exam (stage II). In stage II we utilized an objective structured assessment of technical skills (OSATS) whose results were correlated with those of the written and oral exams. The assessment involved seven skill stations and a global rating scale to indicate correctly performed or not and a fail/pass exam, respectively. Sixty-two surgeons approved the written exam in two places. We found no statistical difference among skills in open surgery (bowel anastomosis, liver and vascular suture), laparoscopic surgery (grape pilling, cutting a circle and intracorporeal knot tying) and instrument identification. There was a statistically significant difference (p <0.001) when median values were compared between laparoscopic surgery vs. open surgery and the identification of surgical instruments. There was a correlation between theoretical knowledge and surgical skills. When applying an OSATS, we found a positive correlation between theoretical knowledge and surgical skills. This assessment proves to to be valid and reliable for the evaluation of surgical dexterity.

48 CFR 642.271 - Government Technical Monitor (GTM).

Code of Federal Regulations, 2014 CFR

2014-10-01

... MANAGEMENT CONTRACT ADMINISTRATION AND AUDIT SERVICES Contract Administration Services 642.271 Government..., or because of special skills or knowledge necessary for monitoring the contractor's work. The...

48 CFR 642.271 - Government Technical Monitor (GTM).

Code of Federal Regulations, 2012 CFR

2012-10-01

... MANAGEMENT CONTRACT ADMINISTRATION AND AUDIT SERVICES Contract Administration Services 642.271 Government..., or because of special skills or knowledge necessary for monitoring the contractor's work. The...

48 CFR 642.271 - Government Technical Monitor (GTM).

Code of Federal Regulations, 2013 CFR

2013-10-01

... MANAGEMENT CONTRACT ADMINISTRATION AND AUDIT SERVICES Contract Administration Services 642.271 Government..., or because of special skills or knowledge necessary for monitoring the contractor's work. The...

What We Feel and What We Do: Emotional Capital in Early Childhood Work

ERIC Educational Resources Information Center

Andrew, Yarrow

2015-01-01

The ancient Greeks articulated three types of knowledge, "episteme," "techne" and "phronesis." Education has emphasised two of these--"pure" knowledge and technical skills--while neglecting the latter. Within early childhood a key aspect of "phronesis"--practical wisdom--is emotion work, and its…

Developing clinical skills in paediatric dysphagia management using human patient simulation (HPS).

PubMed

Ward, Elizabeth C; Hill, Anne E; Nund, Rebecca L; Rumbach, Anna F; Walker-Smith, Katie; Wright, Sarah E; Kelly, Kris; Dodrill, Pamela

2015-06-01

The use of simulated learning environments to develop clinical skills is gaining momentum in speech-language pathology training programs. The aim of the current study was to examine the benefits of adding Human Patient Simulation (HPS) into the university curriculum in the area of paediatric dysphagia. University students enrolled in a mandatory dysphagia course (n = 29) completed two, 2-hour HPS scenarios: (a) performing a clinical feeding assessment with a medically complex infant; and (b) conducting a clinical swallow examination (CSE) with a child with a tracheostomy. Scenarios covered technical and non-technical skills in paediatric dysphagia management. Surveys relating to students' perceived knowledge, skills, confidence and levels of anxiety were conducted: (a) pre-lectures; (b) post-lectures, but pre-HPS; and (c) post-HPS. A fourth survey was completed following clinical placements with real clients. Results demonstrate significant additive value in knowledge, skills and confidence obtained through HPS. Anxiety about working clinically reduced following HPS. Students rated simulation as very useful in preparing for clinical practice. Post-clinic, students indicated that HPS was an important component in their preparation to work as a clinician. This trial supports the benefits of incorporating HPS as part of clinical preparation for paediatric dysphagia management.

Auto Body Repair and Refinishing 2; Automotive Refinishing 1: 9035.04.

ERIC Educational Resources Information Center

Dade County Public Schools, Miami, FL.

This course will provide the student with the general information, technical knowledge, basic skills, attitudes and values required for job entry as an auto body repair helper. Course content includes goals, specific objectives, orientation, service tools and bench skills, paint spray equipment, paint materials, and preparation of automobile body…

An Inquiry into the Development of Future Speech-Language Pathologists: A Mixed Methods Study

ERIC Educational Resources Information Center

Plotts, Kimberly P.

2017-01-01

Upon graduating college, many students seek employment within the degree area in which they obtained. Employers are seeking skills in individuals that encompass interpersonal, technical, analytical, personal, and professional abilities. As with many careers, the allied health field requires content specific knowledge and specialized skills, which…

Training as an E-Commerce Enabler.

ERIC Educational Resources Information Center

Darch, Helen; Lucas, Trevor

2002-01-01

An investigation into lack of skills and awareness as barriers to the use of electronic commerce by 20 small- to medium enterprises within the food industry in Queensland, Australia, found that lack of knowledge and technical skills and structural issues are barriers. A range of training and development strategies are needed. (Contains 20…

Issues of Teacher Identity in a Restructuring Australian Vocational Education and Training (VET) System.

ERIC Educational Resources Information Center

Chappell, Clive

2001-01-01

Recent change discourses on skill development, new vocationalism, and economic rationalism imply a need for new teacher knowledge, skills, and practices. These discourses construct a new professional identity for vocational teachers that competes with traditional identities and limits the goals of technical and further education in Australia to…

Goal Orientations and Metacognitive Skills of Normal Technical and Normal Academic Students on Project Work

ERIC Educational Resources Information Center

Ee, J.; Wang, C.; Koh, C.; Tan, O.; Liu, W.

2009-01-01

In 2000, the Singapore Ministry of Education launched Project Work (PW) to encourage the application of knowledge across disciplines, and to develop thinking, communication, collaboration and metacognitive skills. This preliminary findings of a large scale study examines the role of goal orientations (achievement goals and social goals) in…

Professional Development Needs of Online Instructors of the Louisiana Technical College System

ERIC Educational Resources Information Center

Laycock, Sharon P.

2010-01-01

The purpose of this study was to determine perceptions of importance and the knowledge of skill levels required to develop and deliver distance learning successfully by the Louisiana Technical College (LTC) instructors as related to professional development needs. The study sample consisted of a group of approximately 200 instructors/teachers…

Report of the Education Technical Subcommittee on Food/Beverage Occupations.

ERIC Educational Resources Information Center

Oregon State Dept. of Education, Salem. Div. of Vocational Education.

Written by a technical committee of persons from industry, professional associations, and labor, as well as persons with special expertise, state officials, and educators in Oregon, this document lists the skills and knowledge required of employees in food and beverage occupations. It also identifies the industry standards (performance objectives)…

College Readiness and Workforce Challenges

ERIC Educational Resources Information Center

Evans, Thomas G.; Cook, Harry J.

2011-01-01

One of the key points of agreement among educators is that highly successful schools must disseminate best practices so that all can benefit. Eastern Technical High School, part of Baltimore County (MD) Public Schools, is a career and technical education (CTE) high school where students gain the knowledge and skills they need to pursue a career in…

Design and Assessment of an Associate Degree-Level Plant Operations Technical Education Program

ERIC Educational Resources Information Center

Selwitz, Jason Lawrence

2017-01-01

Research was undertaken to develop and evaluate an associate degree-level technical education program in Plant Operations oriented towards training students in applied science, technology, engineering, and mathematics (STEM) skills and knowledge relevant to a spectrum of processing industries. This work focuses on four aspects of the curriculum…

Report of the Subcommittee for Travel/Tourism of the Hospitality/Tourism/Recreation Technical Committee.

ERIC Educational Resources Information Center

Oregon State Dept. of Education, Salem. Div. of Vocational Education.

Written by a technical committee's industry representatives, state officials, and educators in Oregon, this document lists the skills and knowledge required by employees in travel and tourism occupations. The following occupations are considered: rental representative; service agent; travel agent; bus/tour/driver/guide/sightseeing leader; manager…

75 FR 47573 - Career and Technical Education Program-Promoting Rigorous Career and Technical Education Programs...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-08-06

... program is to use 10 key components based on the ``Program of Study Design Framework'' [[Page 47574...., the States' Career Clusters \\2\\), and offer students the opportunities to earn postsecondary credits... extent to which students are attaining necessary knowledge and skills, we agree that administrators...

Public Safety Core. Integrated Academic and Technical Competencies (ITAC).

ERIC Educational Resources Information Center

Ohio State Dept. of Education, Columbus. Div. of Career-Technical and Adult Education.

This document, which lists the public safety core competencies that are part of the Integrated Academic and Technical Competencies (ITAC) in Ohio, is intended to assist individuals and organizations develop a course to provide students with knowledge and skills applicable to public safety careers, including but not limited to firefighter,…

An Inventory of Skills and Knowledge Necessary for a Career as a Nurse's Aide.

ERIC Educational Resources Information Center

Hawaii State Board for Vocational Education, Honolulu.

In September 1985, the State Board for Vocational Education in Hawaii, in conformance with federal mandates, established technical committees to assess the entry-level employment requirements for a number of occupations. Drawing from an examination of relevant curriculum materials, the Statewide Technical Committee on Health Services developed an…

Cognitive skills training in digital era: A paradigm shift in surgical education using the TaTME model.

PubMed

Knol, Joep; Keller, Deborah S

2018-04-30

Surgical competence is a complex, multifactorial process, requiring ample time and training. Optimal training is based on acquiring knowledge and psychomotor and cognitive skills. Practicing surgical skills is one of the most crucial tasks for both the novice surgeon learning new procedures and surgeons already in practice learning new techniques. Focus is placed on teaching traditional technical skills, but the importance of cognitive skills cannot be underestimated. Cognitive skills allow recognizing environmental cues to improve technical performance including situational awareness, mental readiness, risk assessment, anticipating problems, decision-making, adaptation, and flexibility, and may also accelerate the trainee's understanding of a procedure, formalize the steps being practiced, and reduce the overall training time to become technically proficient. The introduction and implementation of the transanal total mesorectal excision (TaTME) into practice may be the best demonstration of this new model of teaching and training, including pre-training, course attendance, and post-course guidance on technical and cognitive skills. To date, the TaTME framework has been the ideal model for structured training to ensure safe implementation. Further development of metrics to grade successful learning and assessment of long term outcomes with the new pathway will confirm the success of this training model. Copyright © 2018 Royal College of Surgeons of Edinburgh (Scottish charity number SC005317) and Royal College of Surgeons in Ireland. All rights reserved.

Involvement of Technical Reasoning More Than Functional Knowledge in Development of Tool Use in Childhood

PubMed Central

Remigereau, Chrystelle; Roy, Arnaud; Costini, Orianne; Osiurak, François; Jarry, Christophe; Le Gall, Didier

2016-01-01

It is well-known that even toddlers are able to manipulate tools in an appropriate manner according to their physical properties. The ability of children to make novel tools in order to solve problems is, however, surprisingly limited. In adults, mechanical problem solving (MPS) has been proposed to be supported by “technical reasoning skills,” which are thought to be involved in every situation requiring the use of a tool (whether conventional or unusual). The aim of this study was to investigate the typical development of real tool use (RTU) skills and its link with technical reasoning abilities in healthy children. Three experimental tasks were adapted from those used with adults: MPS (three different apparatus), RTU (10 familiar tool-object pairs), and functional knowledge (FK; 10 functional picture matching with familiar tools previously used). The tasks were administered to 85 healthy children divided into six age groups (from 6 to 14 years of age). The results revealed that RTU (p = 0.01) and MPS skills improve with age, even if this improvement differs according to the apparatus for the latter (p < 0.01 for the Hook task and p < 0.05 for the Sloping task). Results also showed that MPS is a better predictor of RTU than FK, with a significant and greater weight (importance weight: 0.65; Estimate ± Standard Error: 0.27 ± 0.08). Ours findings suggest that RTU and technical reasoning develop jointly in children, independently from development of FK. In addition, technical reasoning appears partially operative from the age of six onward, even though the outcome of these skills depends of the context in which they are applied (i.e., the type of apparatus). PMID:27877141

A Method of Sharing Tacit Knowledge by a Bulletin Board Link to Video Scene and an Evaluation in the Field of Nursing Skill

NASA Astrophysics Data System (ADS)

Shimada, Satoshi; Azuma, Shouzou; Teranaka, Sayaka; Kojima, Akira; Majima, Yukie; Maekawa, Yasuko

We developed the system that knowledge could be discovered and shared cooperatively in the organization based on the SECI model of knowledge management. This system realized three processes by the following method. (1)A video that expressed skill is segmented into a number of scenes according to its contents. Tacit knowledge is shared in each scene. (2)Tacit knowledge is extracted by bulletin board linked to each scene. (3)Knowledge is acquired by repeatedly viewing the video scene with the comment that shows the technical content to be practiced. We conducted experiments that the system was used by nurses working for general hospitals. Experimental results show that the nursing practical knack is able to be collected by utilizing bulletin board linked to video scene. Results of this study confirmed the possibility of expressing the tacit knowledge of nurses' empirical nursing skills sensitively with a clue of video images.

Texas Endangered Species Activity Book.

ERIC Educational Resources Information Center

Jackson, Kathleen Marie; Campbell, Linda

This publication is the result of the Texas Parks and Wildlife Division's (TPWD's) commitment to education and the fertile partnerships formed between TPWD biologists and educators. This activity book brings together the expertise and practical knowledge of a classroom teacher with the technical knowledge and skills of a TPWD biologist and artist.…

"They Start to Get "Malicia"": Teaching Tacit and Technical Knowledge

ERIC Educational Resources Information Center

Stephens, Neil; Delamont, Sara

2009-01-01

The sociological study of education involves focusing upon teaching and learning, upon explicit instruction and the acquisition of the tacit knowledge and skills that are essential if learners are to become enculturated into a new "habitus". Sociological insight into these processes can come from research on conventional educational…

[Critical thinking skills in the nursing diagnosis process].

PubMed

Bittencourt, Greicy Kelly Gouveia Dias; Crossetti, Maria da Graça Oliveira

2013-04-01

The aim of this study was to identify the critical thinking skills utilized in the nursing diagnosis process. This was an exploratory descriptive study conducted with seven nursing students on the application of a clinical case to identify critical thinking skills, as well as their justifications in the nursing diagnosis process. Content analysis was performed to evaluate descriptive data. Six participants reported that analysis, scientific and technical knowledge and logical reasoning skills are important in identifying priority nursing diagnoses; clinical experience was cited by five participants, knowledge about the patient and application of standards were mentioned by three participants; Furthermore, discernment and contextual perspective were skills noted by two participants. Based on these results, the use of critical thinking skills related to the steps of the nursing diagnosis process was observed. Therefore, that the application of this process may constitute a strategy that enables the development of critical thinking skills.

Decision-Making, Tacit Knowledge, and Motivation in Semi-Professional Practice: Humanizing the Environment through Anthropomorphism in Clinical Laboratory Science

ERIC Educational Resources Information Center

Mortier, Teresa

2017-01-01

The clinical laboratory science field requires an abundance of technical knowledge; however, the importance of implicit or tacit knowledge gained through observation and practice is often discounted in this field, even though it is a critical part of reflective thinking, critical thinking, and reflective practice. The "de-skilling" of…

An Alternative Expert Knowledge Transfer Model: A Case Study of an Indigenous Storytelling Approach

ERIC Educational Resources Information Center

Spaulding, Roderick Jay

2010-01-01

The increasing complexity of technical work, the demand for highly skilled workers, and the vital challenges facing the world at large have combined to create a need for better ways to transfer knowledge, especially expert knowledge. In this dissertation, I attempted to see if an approach to this process that is more holistic than is typical in…

Relatedness of Students' Work Industrial Experience to the Professional Skills and Competence Development in Engineering Career at Nigerian Universities

ERIC Educational Resources Information Center

Azodo, Adinife Patrick

2018-01-01

Qualitative occupational training and assessment through acquaintance with the knowledge and insight for transference of concepts and procedure of the fundamental scientific and mathematical skills obtainable in engineering profession produces effective and efficient engineering graduates. Thus, it is a guarantee of effective technical manpower…

A Real-Life Case Study of Audit Interactions--Resolving Messy, Complex Problems

ERIC Educational Resources Information Center

Beattie, Vivien; Fearnley, Stella; Hines, Tony

2012-01-01

Real-life accounting and auditing problems are often complex and messy, requiring the synthesis of technical knowledge in addition to the application of generic skills. To help students acquire the necessary skills to deal with these problems effectively, educators have called for the use of case-based methods. Cases based on real situations (such…

Taxonomy of Learning Skills. Interim Technical Report for the Period February 1986-1987.

ERIC Educational Resources Information Center

Kyllonen, Patrick C.; Shute, Valerie J.

Questions concerning individual differences in learning ability may be more precisely addressed in light of an agreed-upon taxonomy of learning skills. Existing taxonomies are reviewed, and their shortcomings are described. A taxonomy is then proposed based on a synthesis of current thought consisting of four dimensions: the forms of knowledge;…

Learning Style Preferences of Adult Students Enrolled in Career Technical Education Programs

ERIC Educational Resources Information Center

Standridge, Gloria A.

2010-01-01

The Problem: The problem to be addressed by this study is the abundance of low-performing American schools that do not sufficiently prepare students with the updated vocational skills and higher order knowledge skills required to compete in the global economy. Method: A qualitative study was used as a survey approach to determine the…

The Effect of Vee Maps and Laboratory Reports on High- and Low-Order Content-Knowledge Achievement in Agriscience Education

ERIC Educational Resources Information Center

Thoron, Andrew C.; Rubenstein, Eric D.

2013-01-01

Instruction in the laboratory is essential to the success of a total agricultural education program. The development of students' critical thinking, argumentation skills, technical skills, reasoning ability, and engagement are all found within the agriscience laboratory. Yet, utilizing the laboratory setting to its maximum potential is challenging…

Diversifying Assessment through Multimedia Creation in a Non-Technical Module: Reflections on the MAIK Project

ERIC Educational Resources Information Center

Cox, Andrew M.; Vasconcelos, Ana Cristina; Holdridge, Peter

2010-01-01

Creation of multimedia (MM) could be a valuable diversification of assessment methods within non-technical modules. The apparent popularity of sites based on user-generated video content such as YouTube and also of podcasting suggests that relevant skills and interest are becoming more mainstream. Translating book learned knowledge into visual…

38 CFR 21.6120 - Educational and vocational training services.

Code of Federal Regulations, 2010 CFR

2010-07-01

... oriented courses of study and training, completion of which usually results in a diploma, certificate... offered provides the technical skills and knowledge generally regarded as specific to, and required for...

A Continuing Educational Initiative to Develop Nurses' Mental Health Knowledge and Skills in Rural and Remote Areas.

ERIC Educational Resources Information Center

Chang, Esther; Daly, John; Bell, Pamela; Brown, Tracey; Allan, Jan; Hancock, Karen

2002-01-01

Australian nurses (n=202) participated in mental health continuing education delivered via distance methods and regional workshops in rural areas. The majority increased content knowledge and thought audio- and videotapes were effective despite technical difficulties; 90% felt the experiential learning workshops and distance modules integrated…

A Survey of Cooperative Engineering Education. Bulletin, 1949, No. 15

ERIC Educational Resources Information Center

Armsby, Henry H.

1949-01-01

Engineers are increasingly being called to occupy positions of leadership in which they need knowledge of society and of social processes sometimes to a greater degree than they need engineering skill. Many educators are deeply concerned over the question of how engineering students may acquire this knowledge in addition to the technical knowledge…

A comparison of basic and state-of-the-arts skills sets of biomedical science technical staff in Lagos public universities.

PubMed

John, T A

2011-12-01

Biomedical science has advanced drastically in developed countries in the last two decades with many health and economic benefits. In Nigeria, biomedical science has not thrived and the contribution from Nigerian universities, indeed African universities, to publications in global high impact journals is low. The present work was based on the hypothesis that there is a lack of state-of-the-arts experimentation in Nigerian biomedical science experiments. An investigation was carried out on the professional skills of biomedical science technical staff of the two (federal and state) public universities in Lagos, Nigeria using a closed-ended questionnaire survey. The 17 respondents were asked about their training, the frequency of utilization of 99 skills, and their expertise. The respondents were "untrained" more in state-of-the-arts skills (34% for electrophoresis, 28% for genomics, 22% for immunochemistry, and 34% for proteomics skills) than in general professional skills (5%), basic technical equipment skills (16%), or general biomedical science knowledge and skills (16%). Frequencies of responses were higher for general skills than for state-of-the-arts skills in the responses "utilizing frequently" (9.96%-31-61% versus 0.36%-4.2%), and "I'm expert" (9.55%-19.88% versus 5.88%-8.48%). It was projected that with continued investment in modern equipment and infrastructure, there will be increased drive for training and usage of modern bioscience research skills and multidisciplinary approaches and production of high-tech scientific publications.

Knowledge Claims, Jurisdictional Control and Professional Status: The Case of Nurse Prescribing

PubMed Central

Kroezen, Marieke; van Dijk, Liset; Groenewegen, Peter P.; Francke, Anneke L.

2013-01-01

Over the past decades, professional boundaries in health care have come under pressure, and the expansion of prescriptive authority to include nurses touches on issues of professional domains and interprofessional competition. Knowledge claims play an important role in achieving jurisdictional control. Knowledge can take on multiple forms, ranging from indeterminate to technical (I/T ratio) and from everyday to exclusive knowledge. To investigate the interrelatedness of jurisdiction, knowledge claims and professional status, we examine which knowledge claims were made by the medical and nursing professions in the Netherlands to secure or obtain, respectively, jurisdictional control over prescribing, and which form this knowledge took. The study is based on thirteen semi-structured stakeholder interviews and an extensive document analysis. We found that the nursing profession in its knowledge claims strongly emphasized the technicality and everyday knowledge character of the prescribing task, by asserting that nurses were already prescribing medicines, albeit on an illegal basis. Their second claim focused on the indeterminate knowledge skills of nurses and stated that nurse prescribing would do justice to nurses’ skills and expertise. This is a strong claim in a quest for (higher) professional status. Results showed that the medical profession initially proclaimed that prescribing should be reserved for doctors as it is a task requiring medical knowledge, i.e. indeterminate knowledge. Gradually, however, the medical profession adjusted its claims and tried to reduce nurse prescribing to a task almost exclusively based on technicality knowledge, among others by stating that nurses could prescribe in routine cases, which would generate little professional status. By investigating the form that professional knowledge claims took, this study was able to show the interconnectedness of jurisdictional control, knowledge claims and professional status. Knowledge claims are not mere rhetoric, but actively influence the everyday realities of professional status, interprofessional competition and jurisdictional division between professions. PMID:24124613

Robotic surgical skill acquisition: What one needs to know?

PubMed Central

Sood, Akshay; Jeong, Wooju; Ahlawat, Rajesh; Campbell, Logan; Aggarwal, Shruti; Menon, Mani; Bhandari, Mahendra

2015-01-01

Robotic surgery has been eagerly adopted by patients and surgeons alike in the field of urology, over the last decade. However, there is a lack of standardization in training curricula and accreditation guidelines to ensure surgeon competence and patient safety. Accordingly, in this review, we aim to highlight ‘who’ needs to learn ‘what’ and ‘how’, to become competent in robotic surgery. We demonstrate that both novice and experienced open surgeons require supervision and mentoring during the initial phases of robotic surgery skill acquisition. The experienced open surgeons possess domain knowledge, however, need to acquire technical knowledge under supervision (either in simulated or clinical environment) to successfully transition to robotic surgery, whereas, novice surgeons need to acquire both domain as well as technical knowledge to become competent in robotic surgery. With regard to training curricula, a variety of training programs such as academic fellowships, mini-fellowships, and mentored skill courses exist, and cater to the needs and expectations of postgraduate surgeons adequately. Fellowships provide the most comprehensive training, however, may not be suitable to all surgeon-learners secondary to the long-term time commitment. For these surgeon-learners short-term courses such as the mini-fellowships or mentored skill courses might be more apt. Lastly, with regards to credentialing uniformity in criteria regarding accreditation is lacking but earnest efforts are underway. Currently, accreditation for competence in robotic surgery is institutional specific. PMID:25598593

Robotic surgical skill acquisition: What one needs to know?

PubMed

Sood, Akshay; Jeong, Wooju; Ahlawat, Rajesh; Campbell, Logan; Aggarwal, Shruti; Menon, Mani; Bhandari, Mahendra

2015-01-01

Robotic surgery has been eagerly adopted by patients and surgeons alike in the field of urology, over the last decade. However, there is a lack of standardization in training curricula and accreditation guidelines to ensure surgeon competence and patient safety. Accordingly, in this review, we aim to highlight 'who' needs to learn 'what' and 'how', to become competent in robotic surgery. We demonstrate that both novice and experienced open surgeons require supervision and mentoring during the initial phases of robotic surgery skill acquisition. The experienced open surgeons possess domain knowledge, however, need to acquire technical knowledge under supervision (either in simulated or clinical environment) to successfully transition to robotic surgery, whereas, novice surgeons need to acquire both domain as well as technical knowledge to become competent in robotic surgery. With regard to training curricula, a variety of training programs such as academic fellowships, mini-fellowships, and mentored skill courses exist, and cater to the needs and expectations of postgraduate surgeons adequately. Fellowships provide the most comprehensive training, however, may not be suitable to all surgeon-learners secondary to the long-term time commitment. For these surgeon-learners short-term courses such as the mini-fellowships or mentored skill courses might be more apt. Lastly, with regards to credentialing uniformity in criteria regarding accreditation is lacking but earnest efforts are underway. Currently, accreditation for competence in robotic surgery is institutional specific.

Automotive Mechanics as Applied to Auto Body; Auto Body Repair and Refinishing 3: 9037.02.

ERIC Educational Resources Information Center

Dade County Public Schools, Miami, FL.

This is a course in which the student will receive the general information, technical knowledge, basic skills, attitudes, and values required for job entry level as an auto body repair helper. Course content includes general and specific goals, orientation, instruction in service tools and bench skills, and auto mechanics as applied to auto body.…

Military Curriculum Materials for Vocational and Technical Education. Masonry 3-4.

ERIC Educational Resources Information Center

Ohio State Univ., Columbus. National Center for Research in Vocational Education.

This independent, self-study course on masonry was developed from military sources for use in vocational education. The course provides basic instruction in the skills and knowledge required to enter the masonry trade. The course involves theory and is intended to be used with laboratory or on-the-job training. Some of the job skills included are…

"'Practitioner Learning" not "Professional Learning:" Towards a Non-Technocratic Model of Autonomous Development for Post-Compulsory Sector Teachers

ERIC Educational Resources Information Center

Derrick, J.

2013-01-01

This paper argues for an understanding of teaching and teacher development that is realistic and based on research. It maintains that teaching is a highly complex job requiring technical knowledge, the highest levels of communication skills, empathy, maturity, intuitive understanding and skills in planning and organisation. It argues that debates…

Beyond knowledge and skills: the use of a Delphi study to develop a technology-mediated teaching strategy.

PubMed

Rowe, Michael; Frantz, Jose; Bozalek, Vivienne

2013-04-10

While there is evidence to suggest that teaching practices in clinical education should include activities that more accurately reflect the real world, many educators base their teaching on transmission models that encourage the rote learning of knowledge and technical skills. Technology-mediated instruction may facilitate the development of professional attributes that go beyond "having" knowledge and skills, but there is limited evidence for how to integrate technology into these innovative teaching approaches. This study used a modified Delphi method to help identify the professional attributes of capable practitioners, the approaches to teaching that may facilitate the development of these attributes, and finally, how technology could be integrated with those teaching strategies in order to develop capable practitioners. Open-ended questions were used to gather data from three different expert panels, and results were thematically analysed. Clinical educators should not view knowledge, skills and attitudes as a set of products of learning, but rather as a set of attributes that are developed during a learning process. Participants highlighted the importance of continuing personal and professional development that emphasised the role of values and emotional response to the clinical context. To develop these attributes, clinical educators should use teaching activities that are learner-centred, interactive, integrated, reflective and that promote engagement. When technology-mediated teaching activities are considered, they should promote the discussion of clinical encounters, facilitate the sharing of resources and experiences, encourage reflection on the learning process and be used to access content outside the classroom. In addition, educational outcomes must drive the integration of technology into teaching practice, rather than the features of the technology. There is a need for a cultural change in clinical education, in which those involved with the professional training of healthcare professionals perceive teaching as more than the transmission of knowledge and technical skills. Process-oriented teaching practices that integrate technology as part of a carefully designed curriculum may have the potential to facilitate the development of capable healthcare graduates who are able to navigate the complexity of health systems and patient management in ways that go beyond the application of knowledge and skills.

Beyond knowledge and skills: the use of a Delphi study to develop a technology-mediated teaching strategy

PubMed Central

2013-01-01

Background While there is evidence to suggest that teaching practices in clinical education should include activities that more accurately reflect the real world, many educators base their teaching on transmission models that encourage the rote learning of knowledge and technical skills. Technology-mediated instruction may facilitate the development of professional attributes that go beyond “having” knowledge and skills, but there is limited evidence for how to integrate technology into these innovative teaching approaches. Methods This study used a modified Delphi method to help identify the professional attributes of capable practitioners, the approaches to teaching that may facilitate the development of these attributes, and finally, how technology could be integrated with those teaching strategies in order to develop capable practitioners. Open-ended questions were used to gather data from three different expert panels, and results were thematically analysed. Results Clinical educators should not view knowledge, skills and attitudes as a set of products of learning, but rather as a set of attributes that are developed during a learning process. Participants highlighted the importance of continuing personal and professional development that emphasised the role of values and emotional response to the clinical context. To develop these attributes, clinical educators should use teaching activities that are learner-centred, interactive, integrated, reflective and that promote engagement. When technology-mediated teaching activities are considered, they should promote the discussion of clinical encounters, facilitate the sharing of resources and experiences, encourage reflection on the learning process and be used to access content outside the classroom. In addition, educational outcomes must drive the integration of technology into teaching practice, rather than the features of the technology. Conclusions There is a need for a cultural change in clinical education, in which those involved with the professional training of healthcare professionals perceive teaching as more than the transmission of knowledge and technical skills. Process-oriented teaching practices that integrate technology as part of a carefully designed curriculum may have the potential to facilitate the development of capable healthcare graduates who are able to navigate the complexity of health systems and patient management in ways that go beyond the application of knowledge and skills. PMID:23574731

Research in Fiber Optics: Implications for Fiber Optics in Vocational-Technical Education. Final Report 1984-85.

ERIC Educational Resources Information Center

Bergen County Vocational-Technical High School, Hackensack, NJ.

This project was conducted to determine the vocational, technical, and scientific skills and knowledge needed to work with the fiber optics applications that are in all areas of technology. A research assistant was hired by the project director to collect data and develop a research base for the project. Information was gathered through a…

Cultural Literacy and Student Engagement: The Case of Technical and Vocational Education and Training (TVET) in Hong Kong

ERIC Educational Resources Information Center

Hui, Sammy King Fai; Cheung, Hoi Yan

2015-01-01

Technical and vocational education and training (TVET) is often seen to be constraining and focused on specific skill development for specific occupations. This goal is at odds with the demands of a knowledge economy that requires more general educational outcomes for an uncertain and unpredictable labour market. For this reason, Hui (2012) has…

37 CFR 11.101 - Competence.

Code of Federal Regulations, 2013 CFR

2013-07-01

... competent representation to a client. Competent representation requires the legal, scientific, and technical knowledge, skill, thoroughness and preparation reasonably necessary for the representation. ... COMMERCE REPRESENTATION OF OTHERS BEFORE THE UNITED STATES PATENT AND TRADEMARK OFFICE USPTO Rules of...

37 CFR 11.101 - Competence.

Code of Federal Regulations, 2014 CFR

2014-07-01

... competent representation to a client. Competent representation requires the legal, scientific, and technical knowledge, skill, thoroughness and preparation reasonably necessary for the representation. ... COMMERCE REPRESENTATION OF OTHERS BEFORE THE UNITED STATES PATENT AND TRADEMARK OFFICE USPTO Rules of...

Virtual reality training for improving the skills needed for performing surgery of the ear, nose or throat.

PubMed

Piromchai, Patorn; Avery, Alex; Laopaiboon, Malinee; Kennedy, Gregor; O'Leary, Stephen

2015-09-09

Virtual reality simulation uses computer-generated imagery to present a simulated training environment for learners. This review seeks to examine whether there is evidence to support the introduction of virtual reality surgical simulation into ear, nose and throat surgical training programmes. 1. To assess whether surgeons undertaking virtual reality simulation-based training achieve surgical ('patient') outcomes that are at least as good as, or better than, those achieved through conventional training methods.2. To assess whether there is evidence from either the operating theatre, or from controlled (simulation centre-based) environments, that virtual reality-based surgical training leads to surgical skills that are comparable to, or better than, those achieved through conventional training. The Cochrane Ear, Nose and Throat Disorders Group (CENTDG) Trials Search Co-ordinator searched the CENTDG Trials Register; Central Register of Controlled Trials (CENTRAL 2015, Issue 6); PubMed; EMBASE; ERIC; CINAHL; Web of Science; ClinicalTrials.gov; ICTRP and additional sources for published and unpublished trials. The date of the search was 27 July 2015. We included all randomised controlled trials and controlled trials comparing virtual reality training and any other method of training in ear, nose or throat surgery. We used the standard methodological procedures expected by The Cochrane Collaboration. We evaluated both technical and non-technical aspects of skill competency. We included nine studies involving 210 participants. Out of these, four studies (involving 61 residents) assessed technical skills in the operating theatre (primary outcomes). Five studies (comprising 149 residents and medical students) assessed technical skills in controlled environments (secondary outcomes). The majority of the trials were at high risk of bias. We assessed the GRADE quality of evidence for most outcomes across studies as 'low'. Operating theatre environment (primary outcomes) In the operating theatre, there were no studies that examined two of three primary outcomes: real world patient outcomes and acquisition of non-technical skills. The third primary outcome (technical skills in the operating theatre) was evaluated in two studies comparing virtual reality endoscopic sinus surgery training with conventional training. In one study, psychomotor skill (which relates to operative technique or the physical co-ordination associated with instrument handling) was assessed on a 10-point scale. A second study evaluated the procedural outcome of time-on-task. The virtual reality group performance was significantly better, with a better psychomotor score (mean difference (MD) 1.66, 95% CI 0.52 to 2.81; 10-point scale) and a shorter time taken to complete the operation (MD -5.50 minutes, 95% CI -9.97 to -1.03). Controlled training environments (secondary outcomes) In a controlled environment five studies evaluated the technical skills of surgical trainees (one study) and medical students (three studies). One study was excluded from the analysis. Surgical trainees: One study (80 participants) evaluated the technical performance of surgical trainees during temporal bone surgery, where the outcome was the quality of the final dissection. There was no difference in the end-product scores between virtual reality and cadaveric temporal bone training. Medical students: Two other studies (40 participants) evaluated technical skills achieved by medical students in the temporal bone laboratory. Learners' knowledge of the flow of the operative procedure (procedural score) was better after virtual reality than conventional training (SMD 1.11, 95% CI 0.44 to 1.79). There was also a significant difference in end-product score between the virtual reality and conventional training groups (SMD 2.60, 95% CI 1.71 to 3.49). One study (17 participants) revealed that medical students acquired anatomical knowledge (on a scale of 0 to 10) better during virtual reality than during conventional training (MD 4.3, 95% CI 2.05 to 6.55). No studies in a controlled training environment assessed non-technical skills. There is limited evidence to support the inclusion of virtual reality surgical simulation into surgical training programmes, on the basis that it can allow trainees to develop technical skills that are at least as good as those achieved through conventional training. Further investigations are required to determine whether virtual reality training is associated with better real world outcomes for patients and the development of non-technical skills. Virtual reality simulation may be considered as an additional learning tool for medical students.

Succession planning for technical experts

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kirk, Bernadette Lugue; Cain, Ronald A.; Dewji, Shaheen A.

This report describes a methodology for identifying, evaluating, and mitigating the loss of key technical skills at nuclear operations facilities. The methodology can be adapted for application within regulatory authorities and research and development organizations, and can be directly applied by international engagement partners of the Department of Energy’s National Nuclear Security Administration (NNSA). The resultant product will be of direct benefit to two types of NNSA missions: (1) domestic human capital development programs tasked to provide focused technical expertise to succeed an aging nuclear operations workforce, and (2) international safeguards programs charged with maintaining operational safeguards for developing/existing nuclearmore » power program in nations where minimal available resources must be used effectively. This report considers succession planning and the critical skills necessary to meet an institution’s goals and mission. Closely tied to succession planning are knowledge management and mentorship. In considering succession planning, critical skill sets are identified and are greatly dependent on the subject matter expert in question. This report also provides examples of critical skills that are job specific.« less

Restructuring the Pleas for the Liberal Arts in an Age of Technology in Ascendancy

ERIC Educational Resources Information Center

Doughty, Howard A.

2010-01-01

Education is many things, but it is primarily the mode of production and reproduction of socially sanctioned knowledge, including the technical skills and sustaining ideology needed to maintain cultural continuity while adapting to social change. To teach creatively and to explore and shape knowledge amidst vast technological changes is the test…

78 FR 60887 - Expressions of Interest (EOI) for Chemical Defense Demonstration Projects

Federal Register 2010, 2011, 2012, 2013, 2014

2013-10-02

..., first responder, and first receiver groups with the knowledge, skills and tools to act swiftly and... designated performers to have access to all outdoor and indoor spaces; (c) review and provide technical input...

Emotionally Intelligent Principals: Addressing the Affective Demands of Newcomers through One-on-One Coaching

ERIC Educational Resources Information Center

Bloom, Gary S.

2004-01-01

In this article, the author points out that it is no secret that school leaders fail not because they lack brains, determination, knowledge and technical skills, but because of what is characterized as "style" or "people skills." Daniel Goleman, author of several books on the subject, cites his own research and the work of others in arguing that…

Content and Language Integrated Learning in Higher Technical Education Using the "InGenio" Online Multimedia Authoring Tool

ERIC Educational Resources Information Center

Gimeno, Ana; Seiz, Rafael; de Siqueira, Jose Macario; Martinez, Antonio

2010-01-01

The future professional world of today's students is becoming a life-long learning process where they have to adapt to a changing market and an environment full of new opportunities and challenges. Thus, the development of a number of personal and professional skills, in addition to technical content and knowledge, is a crucial part of their…

Confidence, knowledge, and skills at the beginning of residency. A survey of pathology residents.

PubMed

Hsieh, Cindy M; Nolan, Norris J

2015-01-01

To document the pathology learning experiences of pathology residents prior to residency and to determine how confident they were in their knowledge and technical skills. An online survey was distributed to all pathology residency program directors in the United States, who were requested to forward the survey link to their residents. Data were obtained on pathology electives, grossing experience, and frozen section experience. Likert scale questions assessed confidence level in knowledge and skills. In total, 201 pathology residents responded (8% of residents in the United States). Prior to starting residency, most respondents had exposure to anatomic pathology through elective rotations. Few respondents had work-related experience. Most did not feel confident in their pathology-related knowledge or skills, and many did not understand what pathology resident duties entail. Respondents gained exposure to pathology primarily through elective rotations, and most felt the elective experience prepared them for pathology residency. However, elective time may be enhanced by providing opportunities for students to increase hands-on experience and understanding of resident duties. Copyright© by the American Society for Clinical Pathology.

77 FR 43616 - Office of the Assistant Secretary for Office of Disability Employment Program, National Technical...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-07-25

... center, the National Collaborative on Workforce and Disability for Youth (NCWD/Y). The Center will... Development and Leadership: Increasing the knowledge and leadership skills of youth receiving services from a...

Self-Centered Management Skills and Knowledge Appropriation by Students in High Schools and Private Secondary Schools of the City of Maroua

ERIC Educational Resources Information Center

Oyono, Tadjuidje Michel

2016-01-01

Knowledge in its process of appropriation necessitates on the part of the learner, the mobilization of an efficient management strategy of adapted competencies. The present article in its problematic presents the theoretical perspective of Desaunay (1985) which estimates that three fundamental competences (relational, technical and affective) have…

The Impact of Farmer Field Schools on Human and Social Capital: A Case Study from Ghana

ERIC Educational Resources Information Center

David, Soniia; Asamoah, Christopher

2011-01-01

Based on a case study of Ghanaian cocoa farmers who attended farmer field schools (FFS), this paper explores the impact of the FFS methodology on farmers' technical knowledge, experimentation, knowledge diffusion, group formation and social skills as a way of assessing whether the relatively high costs associated with the method is justified. We…

Preparing Students for Extension Careers and Expanding U.S. Extension Reach through International Service Learning

ERIC Educational Resources Information Center

Ebner, Paul; Constantinescu, Alina; Borlea, Florian; Indrea, Alexandru; Russell, Mark

2017-01-01

As U.S. Extension broadens its reach around the globe, an increased need exists for Extension professionals who have not only technical knowledge but also the cultural competencies to apply that knowledge in international settings. We describe a course that provides students with the opportunity to develop skills needed for potential careers in…

Introducing a Fresh Cadaver Model for Ultrasound-guided Central Venous Access Training in Undergraduate Medical Education

PubMed Central

Miller, Ryan; Ho, Hang; Ng, Vivienne; Tran, Melissa; Rappaport, Douglas; Rappaport, William J.A.; Dandorf, Stewart J.; Dunleavy, James; Viscusi, Rebecca; Amini, Richard

2016-01-01

Introduction Over the past decade, medical students have witnessed a decline in the opportunities to perform technical skills during their clinical years. Ultrasound-guided central venous access (USG-CVA) is a critical procedure commonly performed by emergency medicine, anesthesia, and general surgery residents, often during their first month of residency. However, the acquisition of skills required to safely perform this procedure is often deficient upon graduation from medical school. To ameliorate this lack of technical proficiency, ultrasound simulation models have been introduced into undergraduate medical education to train venous access skills. Criticisms of simulation models are the innate lack of realistic tactile qualities, as well as the lack of anatomical variances when compared to living patients. The purpose of our investigation was to design and evaluate a life-like and reproducible training model for USG-CVA using a fresh cadaver. Methods This was a cross-sectional study at an urban academic medical center. An 18-point procedural knowledge tool and an 18-point procedural skill evaluation tool were administered during a cadaver lab at the beginning and end of the surgical clerkship. During the fresh cadaver lab, procedure naïve third-year medical students were trained on how to perform ultrasound-guided central venous access of the femoral and internal jugular vessels. Preparation of the fresh cadaver model involved placement of a thin-walled latex tubing in the anatomic location of the femoral and internal jugular vein respectively. Results Fifty-six third-year medical students participated in this study during their surgical clerkship. The fresh cadaver model provided high quality and lifelike ultrasound images despite numerous cannulation attempts. Technical skill scores improved from an average score of 3 to 12 (p<0.001) and procedural knowledge scores improved from an average score of 4 to 8 (p<0.001). Conclusion The use of this novel cadaver model prevented extravasation of fluid, maintained ultrasound-imaging quality, and proved to be an effective educational model allowing third-year medical students to improve and maintain their technical skills. PMID:27330672

Introducing a Fresh Cadaver Model for Ultrasound-guided Central Venous Access Training in Undergraduate Medical Education.

PubMed

Miller, Ryan; Ho, Hang; Ng, Vivienne; Tran, Melissa; Rappaport, Douglas; Rappaport, William J A; Dandorf, Stewart J; Dunleavy, James; Viscusi, Rebecca; Amini, Richard

2016-05-01

Over the past decade, medical students have witnessed a decline in the opportunities to perform technical skills during their clinical years. Ultrasound-guided central venous access (USG-CVA) is a critical procedure commonly performed by emergency medicine, anesthesia, and general surgery residents, often during their first month of residency. However, the acquisition of skills required to safely perform this procedure is often deficient upon graduation from medical school. To ameliorate this lack of technical proficiency, ultrasound simulation models have been introduced into undergraduate medical education to train venous access skills. Criticisms of simulation models are the innate lack of realistic tactile qualities, as well as the lack of anatomical variances when compared to living patients. The purpose of our investigation was to design and evaluate a life-like and reproducible training model for USG-CVA using a fresh cadaver. This was a cross-sectional study at an urban academic medical center. An 18-point procedural knowledge tool and an 18-point procedural skill evaluation tool were administered during a cadaver lab at the beginning and end of the surgical clerkship. During the fresh cadaver lab, procedure naïve third-year medical students were trained on how to perform ultrasound-guided central venous access of the femoral and internal jugular vessels. Preparation of the fresh cadaver model involved placement of a thin-walled latex tubing in the anatomic location of the femoral and internal jugular vein respectively. Fifty-six third-year medical students participated in this study during their surgical clerkship. The fresh cadaver model provided high quality and lifelike ultrasound images despite numerous cannulation attempts. Technical skill scores improved from an average score of 3 to 12 (p<0.001) and procedural knowledge scores improved from an average score of 4 to 8 (p<0.001). The use of this novel cadaver model prevented extravasation of fluid, maintained ultrasound-imaging quality, and proved to be an effective educational model allowing third-year medical students to improve and maintain their technical skills.

An overview of conceptual understanding in science education curriculum in Indonesia

NASA Astrophysics Data System (ADS)

Widiyatmoko, A.; Shimizu, K.

2018-03-01

The purpose of this article is to discuss the term of “conceptual understanding” in science education curriculum in Indonesia. The implementation of 2013 Curriculum focuses on the acquisition of contextual knowledge in respective areas and environments. The curriculum seeks to develop students' evaluation skills in three areas: attitude, technical skills, and scientific knowledge. It is based on two layers of competencies: core and basic competencies. The core competencies in the curriculum 2013 represent the ability level to achieve the gradute competency standards of a students at each grade level. There are four mandatory core competencies for all educational levels and all subjects including science, which are spiritual, social, knowledge and skills competencies. In terms of knowledge competencies, conceptual understanding is an inseparable part of science concept since conceptual understanding is one of the basic competencies in science learning. This competency is a part of science graduation standard indicated in MoEC article number 20 in 2016. Therefore, conceptual understanding is needed by students for learning science successfully.

A culture of technical knowledge: Professionalizing science and engineering education in late-nineteenth century America

NASA Astrophysics Data System (ADS)

Nienkamp, Paul

This manuscript examines the intellectual, cultural, and practical approaches to science and engineering education as a part of the land-grant college movement in the Midwest between the 1850s and early 1900s. These land-grant institutions began and grew within unique frontier societies that both cherished self-reliance and diligently worked to make themselves part of the larger national experience. College administrators and professors encountered rapidly changing public expectations, regional needs, and employment requirements. They recognized a dire need for technically skilled men and women who could quickly adapt to changes in equipment and processes, and implement advances in scientific knowledge in American homes, fields, and factories. Charged with educating the "industrial classes in the several pursuits and professions in life," land-grant college supporters and professors sought out the most modern and innovative instructional methods. Combining the humanities, sciences, and practical skills that they believed uniquely suited student needs, these pioneering educators formulated new curricula and training programs that advanced both the knowledge and the social standing of America's agricultural and mechanical working classes.

Recognising Potential: Trade Educators Transforming a Workforce

ERIC Educational Resources Information Center

Maurice-Takerei, Lisa

2017-01-01

The importance of developing a knowledgeable, skilled, adaptable and flexible workforce that engages in continuous learning is outlined in the 2015 United Nations Educational, Scientific and Cultural Organization (UNESCO) document "Unleashing the Potential: Transforming Technical and Vocational Education and Training". While this…

Efforts to improve aviation medical examiner performance through continuing medical education and annual performance reports.

DOT National Transportation Integrated Search

1984-01-01

Continuing medical education (CME) serves to maintain or increase the knowledge, interpretive proficiencies, and technical skills that a physician uses in his/her practice of medicine. Resulting improvement in professional performance is frequently d...

Proceedings: National silvicultural workshop

Treesearch

Stanley J. Barras

2001-01-01

Silviculture, as an integrative discipline, must combine management skills with scientific and technical knowledge in the management of forests and woodlands. While traditionally, silviculturists worked in fine resolution landscapes, today's practitioner must look at encompassing both larger geographic areas (adjacent stands, watersheds, regions, subregions) and...

Study on establishment of Body of Knowledge of Taiwan's Traditional Wooden Structure Technology

NASA Astrophysics Data System (ADS)

Huang, M. T.; Chiou, S. C.; Hsu, T. W.; Su, P. C.

2015-08-01

The timber technology of the Taiwan traditional architecture is brought by the immigrants in the Southern Fujian of China in the early, which has been inherited for a hundred years. In the past, these traditional timber technologies were taught by mentoring, however, due to the change of the social form, the construction of the traditional architecture was faded away, and what is gradually replaced is the repair work of the traditional architecture, therefore, the construction method of the timber technology, use form of the tool and other factors are very different from previous one, and the core technology is faced with the dilemma of endangered loss. There are many relevant studies on architectural style, construction method of technology, schools of craftsman, technical capacity of craftsman and other timber technologies, or the technology preservation is carried out by dictating the historical record, studying the skills and other ways, but for the timber craftsman repairing the traditional architecture on the front line, there is still space for discussing whether to maintain the original construction method and maintain the due repair quality for the core technology. This paper classified the timber technology knowledge with the document analysis method and expert interview method, carried out the architecture analysis of knowledge hierarchy, and finally, built the preliminary framework of the timber technology knowledge system of the Taiwan traditional architecture, and built the standard formulation available for craftsman training and skills identification by virtue of the knowledge system, so that the craftsman did not affect the technical capacity due to the change of the knowledge instruction system, thus, affecting the repair quality of the traditional architecture; and in addition, the building of the database system can also be derived by means of the knowledge structure, so as to integrate the consistency of the contents of core technical capacity. It can be used as the interpretation data; the knowledge is standardized and the authority file is established, which is regarded as a technical specification, so that the technology is standardized, thus, avoid loss or distort.

Work-based learning: A training model for state wide system changes.

PubMed

Clay, Zakia; Barrett, Nora; Reilly, Ann; Zazzarino, Anthony

2016-12-01

Despite the substantial amount of money invested in staff training each year, many people trained fail to transfer what they learn to the workplace. We document a training initiative that was implemented to develop and maintain a competent workforce. A work-based learning (WBL) model was used as a guide to teach the knowledge and skills necessary to effectively deliver psychiatric rehabilitation services. This training framework afforded practitioners an opportunity to acquire the critical knowledge and skills to improve the quality of life for individuals living with serious mental illnesses. Preliminary pre and posttest results show an overall increase in practitioner knowledge. Additionally, individualized technical assistance has the potential to increase positive learning outcomes. (PsycINFO Database Record (c) 2016 APA, all rights reserved).

Deaf college students' mathematical skills relative to morphological knowledge, reading level, and language proficiency.

PubMed

Kelly, Ronald R; Gaustad, Martha G

2007-01-01

This study of deaf college students examined specific relationships between their mathematics performance and their assessed skills in reading, language, and English morphology. Simple regression analyses showed that deaf college students' language proficiency scores, reading grade level, and morphological knowledge regarding word segmentation and meaning were all significantly correlated with both the ACT Mathematics Subtest and National Technical Institute for the Deaf (NTID) Mathematics Placement Test scores. Multiple regression analyses identified the best combination from among these potential independent predictors of students' performance on both the ACT and NTID mathematics tests. Additionally, the participating deaf students' grades in their college mathematics courses were significantly and positively associated with their reading grade level and their knowledge of morphological components of words.

Cognitive task analysis for teaching technical skills in an inanimate surgical skills laboratory.

PubMed

Velmahos, George C; Toutouzas, Konstantinos G; Sillin, Lelan F; Chan, Linda; Clark, Richard E; Theodorou, Demetrios; Maupin, Fredric

2004-01-01

The teaching of surgical skills is based mostly on the traditional "see one, do one, teach one" resident-to-resident method. Surgical skills laboratories provide a new environment for teaching skills but their effectiveness has not been adequately tested. Cognitive task analysis is an innovative method to teach skills, used successfully in nonmedical fields. The objective of this study is to evaluate the effectiveness of a 3-hour surgical skills laboratory course on central venous catheterization (CVC), taught by the principles of cognitive task analysis to surgical interns. Upon arrival to the Department of Surgery, 26 new interns were randomized to either receive a surgical skills laboratory course on CVC ("course" group, n = 12) or not ("traditional" group, n = 14). The course consisted mostly of hands-on training on inanimate CVC models. All interns took a 15-item multiple-choice question test on CVC at the beginning of the study. Within two and a half months all interns performed CVC on critically ill patients. The outcome measures were cognitive knowledge and technical-skill competence on CVC. These outcomes were assessed by a 14-item checklist evaluating the interns while performing CVC on a patient and by the 15-item multiple-choice-question test, which was repeated at that time. There were no differences between the two groups in the background characteristics of the interns or the patients having CVC. The scores at the initial multiple-choice test were similar (course: 7.33 +/- 1.07, traditional: 8 +/- 2.15, P = 0.944). However, the course interns scored significantly higher in the repeat test compared with the traditional interns (11 +/- 1.86 versus 8.64 +/- 1.82, P = 0.03). Also, the course interns achieved a higher score on the 14-item checklist (12.6 +/- 1.1 versus 7.5 +/- 2.2, P <0.001). They required fewer attempts to find the vein (3.3 +/- 2.2 versus 6.4 +/- 4.2, P = 0.046) and showed a trend toward less time to complete the procedure (15.4 +/- 9.5 versus 20.6 +/- 9.1 minutes, P = 0.149). A surgical skills laboratory course on CVC, taught by the principles of cognitive task analysis and using inanimate models, improves the knowledge and technical skills of new surgical interns on this task.

20 CFR 627.422 - Selection of service providers.

Code of Federal Regulations, 2011 CFR

2011-04-01

... operational controls; and (7) The technical skills to perform the work. (e) In selecting service providers to... community-based organizations (section 107(a)). These community-based organizations, including women's organizations with knowledge about or experience in nontraditional training for women, shall be organizations...

Groundwater and Distribution Workbook.

ERIC Educational Resources Information Center

Ekman, John E.

Presented is a student manual designed for the Wisconsin Vocational, Technical and Adult Education Groundwater and Distribution Training Course. This program introduces waterworks operators-in-training to basic skills and knowledge required for the operation of a groundwater distribution waterworks facility. Arranged according to the general order…

Tacit knowledge: A refinement and empirical test of the Academic Tacit Knowledge Scale.

PubMed

Insch, Gary S; McIntyre, Nancy; Dawley, David

2008-11-01

Researchers have linked tacit knowledge to improved organizational performance, but research on how to measure tacit knowledge is scarce. In the present study, the authors proposed and empirically tested a model of tacit knowledge and an accompanying measurement scale of academic tacit knowledge. They present 6 hypotheses that support the proposed tacit knowledge model regarding the role of cognitive (self-motivation, self-organization); technical (individual task, institutional task); and social (task-related, general) skills. The authors tested these hypotheses with 542 responses to the Academic Tacit Knowledge Scale, which included the respondents' grade point average-the performance variable. All 6 hypotheses were supported.

Quantitative Evaluation of Performance in Interventional Neuroradiology: An Integrated Curriculum Featuring Theoretical and Practical Challenges.

PubMed

Ernst, Marielle; Kriston, Levente; Romero, Javier M; Frölich, Andreas M; Jansen, Olav; Fiehler, Jens; Buhk, Jan-Hendrik

2016-01-01

We sought to develop a standardized curriculum capable of assessing key competencies in Interventional Neuroradiology by the use of models and simulators in an objective, quantitative, and efficient way. In this evaluation we analyzed the associations between the practical experience, theoretical knowledge, and the skills lab performance of interventionalists. We evaluated the endovascular skills of 26 participants of the Advanced Course in Endovascular Interventional Neuroradiology of the European Society of Neuroradiology with a set of three tasks (aneurysm coiling and thrombectomy in a virtual simulator and placement of an intra-aneurysmal flow disruptor in a flow model). Practical experience was assessed by a survey. Participants completed a written and oral examination to evaluate theoretical knowledge. Bivariate and multivariate analyses were performed. In multivariate analysis knowledge of materials and techniques in Interventional Neuroradiology was moderately associated with skills in aneurysm coiling and thrombectomy. Experience in mechanical thrombectomy was moderately associated with thrombectomy skills, while age was negatively associated with thrombectomy skills. We found no significant association between age, sex, or work experience and skills in aneurysm coiling. Our study gives an example of how an integrated curriculum for reasonable and cost-effective assessment of key competences of an interventional neuroradiologist could look. In addition to traditional assessment of theoretical knowledge practical skills are measured by the use of endovascular simulators yielding objective, quantitative, and constructive data for the evaluation of the current performance status of participants as well as the evolution of their technical competency over time.

Formula student as part of a mechanical engineering curriculum

NASA Astrophysics Data System (ADS)

Davies, Huw Charles

2013-10-01

Formula Student (FS) is a multi-university student design competition managed by the UK Institution of Mechanical Engineers. Students are required to demonstrate and prove their creativity and engineering skills through the design, manufacture and financing of a small formula style race car. This paper seeks to explore the educational value that derives from the FS activity through a series of semi-structured interviews with key stakeholders. Through the analysis of the interview data, it was found that the FS activity supported development of student skills and competencies in the following areas: use of engineering knowledge to support the application of existing and emerging technology; application of theoretical and practical knowledge to the solution of engineering problems; development of technical and commercial management skills; development of effective interpersonal skills, including communication skills; and demonstration of personal commitment to professional development. In addition, a number of areas for implementing 'good practise' have been identified. The information herein supports educators in their responsibility to help meet the needs of the engineering industry for high quality graduates.

Simulation center training as a means to improve resident performance in percutaneous noncontinuous CT-guided fluoroscopic procedures with dose reduction.

PubMed

Mendiratta-Lala, Mishal; Williams, Todd R; Mendiratta, Vivek; Ahmed, Hafeez; Bonnett, John W

2015-04-01

The purpose of this study was to evaluate the effectiveness of a multifaceted simulation-based resident training for CT-guided fluoroscopic procedures by measuring procedural and technical skills, radiation dose, and procedure times before and after simulation training. A prospective analysis included 40 radiology residents and eight staff radiologists. Residents took an online pretest to assess baseline procedural knowledge. Second-through fourth-year residents' baseline technical skills with a procedural phantom were evaluated. First-through third-year residents then underwent formal didactic and simulation-based procedural and technical training with one of two interventional radiologists and followed the training with 1 month of supervised phantom-based practice. Thereafter, residents underwent final written and practical examinations. The practical examination included essential items from a 20-point checklist, including site and side marking, consent, time-out, and sterile technique along with a technical skills portion assessing pedal steps, radiation dose, needle redirects, and procedure time. The results indicated statistically significant improvement in procedural and technical skills after simulation training. For residents, the median number of pedal steps decreased by three (p=0.001), median dose decreased by 15.4 mGy (p<0.001), median procedure time decreased by 4.0 minutes (p<0.001), median number of needle redirects decreased by 1.0 (p=0.005), and median number of 20-point checklist items successfully completed increased by three (p<0.001). The results suggest that procedural skills can be acquired and improved by simulation-based training of residents, regardless of experience. CT simulation training decreases procedural time, decreases radiation dose, and improves resident efficiency and confidence, which may transfer to clinical practice with improved patient care and safety.

Challenges for PISA

ERIC Educational Resources Information Center

Schleicher, Andreas

2016-01-01

The OECD Programme for International Student Assessment (PISA) provides a framework in which over 80 countries collaborate to build advanced global metrics to assess the knowledge, skills and character attributes of the students. The design of assessments poses major conceptual and technical challenges, as successful learning. Beyond a sound…

Writing Effectively as Counseling Center Directors and Administrators: Lessons Learned from a 2-Minute Speech

ERIC Educational Resources Information Center

Sevig, Todd; Bogan, Yolanda; Dunkle, John; Gong-Guy, Elizabeth

2015-01-01

Administrative writing is a crucial skill needed for the counseling center professional to be able to transmit knowledge and values for the rest of the campus community. This article highlights both conceptual and technical aspects of effective writing.

Report of the Technical Committee for Marketing.

ERIC Educational Resources Information Center

Oregon State Dept. of Education, Salem. Div. of Vocational Education.

This committee report identifies the skills and knowledge required by employees in the marketing occupational area. It also provides performance objectives from which competencies and instructional objectives may be developed. Introductory materials include a list of committee members, statement of the marketing committee, information on marketing…

Job Prospects for Computer Engineers.

ERIC Educational Resources Information Center

Basta, Nicholas

1988-01-01

Discusses the computer engineering industry in the United States. Recounts recent shifts in the computer industry and notes that despite foreign competition, the industry offers graduating computer engineers ample opportunities for employment. Claims that skill and technical knowledge are the most important assets for getting a job. (TW)

Using interactive problem-solving techniques to enhance control systems education for non English-speakers

NASA Astrophysics Data System (ADS)

Lamont, L. A.; Chaar, L.; Toms, C.

2010-03-01

Interactive learning is beneficial to students in that it allows the continual development and testing of many skills. An interactive approach enables students to improve their technical capabilities, as well as developing both verbal and written communicative ability. Problem solving and communication skills are vital for engineering students; in the workplace they will be required to communicate with people of varying technical abilities and from different linguistic and engineering backgrounds. In this paper, a case study is presented that discusses how the traditional method of teaching control systems can be improved. 'Control systems' is a complex engineering topic requiring students to process an extended amount of mathematical formulae. MATLAB software, which enables students to interactively compare a range of possible combinations and analyse the optimal solution, is used to this end. It was found that students became more enthusiastic and interested when given ownership of their learning objectives. As well as improving the students' technical knowledge, other important engineering skills are also improved by introducing an interactive method of teaching.

Predictors of employer satisfaction: technical and non-technical skills.

PubMed

Danielson, Jared A; Wu, Tsui-Feng; Fales-Williams, Amanda J; Kirk, Ryan A; Preast, Vanessa A

2012-01-01

Employers of 2007-2009 graduates from Iowa State University College of Veterinary Medicine were asked to respond to a survey regarding their overall satisfaction with their new employees as well as their new employees' preparation in several technical and non-technical skill areas. Seventy-five responses contained complete data and were used in the analysis. Four technical skill areas (data collection, data interpretation, planning, and taking action) and five non-technical skill areas (interpersonal skills, ability to deal with legal issues, business skills, making referrals, and problem solving) were identified. All of the skill area subscales listed above had appropriate reliability (Cronbach's alpha>0.70) and were positively and significantly correlated with overall employer satisfaction. Results of two simultaneous regression analyses indicated that of the four technical skill areas, taking action is the most salient predictor of employer satisfaction. Of the five non-technical skill areas, interpersonal skills, business skills, making referrals, and problem solving were the most important skills in predicting employer satisfaction. Hierarchical regression analysis revealed that all technical skills explained 25% of the variation in employer satisfaction; non-technical skills explained an additional 42% of the variation in employer satisfaction.

Teaching communication and supporting autonomy with a team-based operative simulator.

PubMed

Cook, Mackenzie R; Deal, Shanley B; Scott, Jessica M; Moren, Alexis M; Kiraly, Laszlo N

2016-09-01

Changing residency structure emphasizes the need for formal instruction on team leadership and intraoperative teaching skills. A high fidelity, multi-learner surgical simulation may offer opportunities for senior learners (SLs) to learn these skills while teaching technical skills to junior learners (JLs). We designed and optimized a low-cost inguinal hernia model that paired JLs and SLs as an operative team. This was tested in 3 pilot simulations. Participants' feedback was analyzed using qualitative methods. JL feedback to SLs included the themes "guiding and instructing" and "allowing autonomy." Senior Learner feedback to JLs focused on "mechanics," "knowledge," and "perspective/flow." Both groups focused on "communication" and "professionalism." A multi-learner simulation can successfully meet the technical learning needs of JLs and the teaching and communication learning needs of SLs. This model of resident-driven simulation may illustrate future opportunities for operative simulation. Copyright © 2016 Elsevier Inc. All rights reserved.

Workplace training for senior trainees: a systematic review and narrative synthesis of current approaches to promote patient safety.

PubMed

Walton, Merrilyn; Harrison, Reema; Burgess, Annette; Foster, Kirsty

2015-10-01

Preventable harm is one of the top six health problems in the developed world. Developing patient safety skills and knowledge among advanced trainee doctors is critical. Clinical supervision is the main form of training for advanced trainees. The use of supervision to develop patient safety competence has not been established. To establish the use of clinical supervision and other workplace training to develop non-technical patient safety competency in advanced trainee doctors. Keywords, synonyms and subject headings were used to search eight electronic databases in addition to hand-searching of relevant journals up to 1 March 2014. Titles and abstracts of retrieved publications were screened by two reviewers and checked by a third. Full-text articles were screened against the eligibility criteria. Data on design, methods and key findings were extracted. Clinical supervision documents were assessed against components common to established patient safety frameworks. Findings from the reviewed articles and document analysis were collated in a narrative synthesis. Clinical supervision is not identified as an avenue for embedding patient safety skills in the workplace and is consequently not evaluated as a method to teach trainees these skills. Workplace training in non-technical patient safety skills is limited, but one-off training courses are sometimes used. Clinical supervision is the primary avenue for learning in postgraduate medical education but the most overlooked in the context of patient safety learning. The widespread implementation of short courses is not matched by evidence of rigorous evaluation. Supporting supervisors to identify teaching moments during supervision and to give weight to non-technical skills and technical skills equally is critical. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://group.bmj.com/group/rights-licensing/permissions.

Optics education for machine operators in the semiconductor industry: moving beyond button pushing

NASA Astrophysics Data System (ADS)

Karakekes, Meg; Currier, Deborah

1995-10-01

In the competitive semiconductor manufacturing industry, employees who operate equipment are able to make greater contributions if they understand how the equipment works. By understanding the 'why' behind the 'what', the equipment operators can better partner with other technical staff to produce quality integrated circuits efficiently and effectively. This additional knowledge also opens equipment operators to job enrichment and enlargement opportunities. Advanced Micro Devices (AMD) is in the process of upgrading the skills of its equipment operators. This paper is an overview of a pilot program that employs optics education to upgrade stepper operators' skills. The paper starts with stepper tasks that require optics knowledge, examines teaching methods, reports both end-of-course and three months post-training knowledge retention, and summarizes how the training has impacted the production floor.

Computer-assisted surgery simulations and directed practice of total knee arthroplasty: educational benefits to the trainee.

PubMed

Myden, C A; Anglin, C; Kopp, G D; Hutchison, C R

2012-01-01

Orthopaedic residents typically learn to perform total knee arthroplasty (TKA) through an apprenticeship-type model, which is a necessarily slow process. Surgical skills courses, using artificial bones, have been shown to improve technical and cognitive skills significantly within a couple of days. The addition of computer-assisted surgery (CAS) simulations challenges the participants to consider the same task in a different context, promoting cognitive flexibility. We designed a hands-on educational intervention for junior residents with a conventional tibiofemoral TKA station, two different tibiofemoral CAS stations, and a CAS and conventional patellar resection station, including both qualitative and quantitative analyses. Qualitatively, structured interviews before and after the course were analyzed for recurring themes. Quantitatively, subjects were evaluated on their technical skills before and after the course, and on a multiple-choice knowledge test and error detection test after the course, in comparison to senior residents who performed only the testing. Four themes emerged: confidence, awareness, deepening knowledge and changed perspectives. The residents' attitudes to CAS changed from negative before the course to neutral or positive afterwards. The junior resident group completed 23% of tasks in the pre-course skills test and 75% of tasks on the post-test (p<0.01), compared to 45% of tasks completed by the senior resident group. High-impact educational interventions, promoting cognitive flexibility, would benefit trainees, attending surgeons, the healthcare system and patients.

[Preparedness of health personnel in a highly industrialized health area of Asturias to respond to industrial disasters].

PubMed

Castro Delgado, Rafael; Arcos González, Pedro; Cuartas Alvarez, Tatiana

2003-01-01

In order to provide a response to industrial accidents with a view to minimizing their consequences, the healthcare personnel working in areas at risk must be properly trained. This study is aimed at determining the degree of subjective perception that healthcare professional have with regard to how well-prepared they are to take action in response to an industrial accident resulting in a large number of injuries, as well as their knowledge of industrial hazards inherent to the area. A questionnaire was designed to measure five dimensions related to the response to industrial accidents (technical knowledge, knowledge of the Area, practical skills, attitudes and training). The sample was comprised of all of the Primary Care physicians and nursing staff in the District and from the Emergency Department at the related hospital. The response rate was 61.2%. The results for the questions related to each dimension, on a maximum scale of 4, were: Technical skills (mu = 1.3; delta = 0.81); Knowledge of the District (mu = 0.75; delta = 0.96); Practical skills (mu = 0.9; delta = 0.8); Attitudes (mu = 3.25; delta = 0.73) and Training (mu = 0.75; delta = 0.88). Those working in hospital emergency departments and those hired under indefinite or temporary contracts scored higher than those employed under permanent contracts. Information and training is lacking among these healthcare professionals, contrasting with the interest shown in correcting these lacks. It is necessary for a basic training and information program to be set up in order to deal with industrial disasters in our Healthcare District.

[Cultural Competence in Intervention with Immigrants: A Comparative Analysis Between Health Professionals, Social Workers and Police Officers].

PubMed

Gonçalves, Mariana; Matos, Marlene

2016-10-01

Cultural diversity places increased demands on services to multicultural populations, so the development of cultural competence by help professionals is currently a concern in institutional practices. This study evaluated the perception of cultural competence of help professional of three distinct areas: health services, social services and criminal police. Through an online questionnaire, we questioned the perception of cultural competence, at four dimensions: cultural awareness, cultural knowledge, technical skills, and organizational support. There were 610 participants, mostly female (58%), with a mean age of 39.74 years, developing activity in the social area (37%), health (33%) or the police (30%). The professionals showed, in general, a positive perception of their cultural competence. Those who had formative experiences on the subject and had more time service, perceived themselves, significantly, as more culturally competent. Significant differences were found between professionals from different areas: health professionals were more effective in terms of technical skills, the social workers at the level of cultural knowledge and polices at the level of cultural awareness. Health professionals were the ones that showed a lower perception at the level of organizational support. Despite the positive perception that technicians have about their awareness and knowledge of the values, norms and customs of immigrant communities, they realize technical aptitude as less positive, showing difficulty in practical application of their knowledge. Cultural competence has implications for good professional practice in serving multicultural populations, being urgent to invest in the development of culturally competent interventions to ensure more effective services, namely in hospitals and health centres.

Utilitiesman 3 and 2. Rate Training Manual. Revised 1973.

ERIC Educational Resources Information Center

Naval Training Command, Pensacola, FL.

This Rate Training Manual provides the technical knowledge and skill requirements necessary to prepare Utilitiesmen to perform tasks involved in the installation, maintenance, and repair of plumbing, heating, steam, fuel storage and distribution systems, water treatment and distribution systems, air conditioning and refrigeration equipment, and…

25 CFR 286.17 - Grant limitations and requirements.

Code of Federal Regulations, 2014 CFR

2014-04-01

... of the enterprise to be funded and the knowledge and management skills of the applicant. (f) Grant... operation of the economic enterprise, or (3) Did not follow and use the management and technical assistance... Indians BUREAU OF INDIAN AFFAIRS, DEPARTMENT OF THE INTERIOR ECONOMIC ENTERPRISES INDIAN BUSINESS...

25 CFR 286.17 - Grant limitations and requirements.

Code of Federal Regulations, 2012 CFR

2012-04-01

... of the enterprise to be funded and the knowledge and management skills of the applicant. (f) Grant... operation of the economic enterprise, or (3) Did not follow and use the management and technical assistance... Indians BUREAU OF INDIAN AFFAIRS, DEPARTMENT OF THE INTERIOR ECONOMIC ENTERPRISES INDIAN BUSINESS...

25 CFR 286.17 - Grant limitations and requirements.

Code of Federal Regulations, 2013 CFR

2013-04-01

... of the enterprise to be funded and the knowledge and management skills of the applicant. (f) Grant... operation of the economic enterprise, or (3) Did not follow and use the management and technical assistance... Indians BUREAU OF INDIAN AFFAIRS, DEPARTMENT OF THE INTERIOR ECONOMIC ENTERPRISES INDIAN BUSINESS...

25 CFR 286.17 - Grant limitations and requirements.

Code of Federal Regulations, 2011 CFR

2011-04-01

... of the enterprise to be funded and the knowledge and management skills of the applicant. (f) Grant... operation of the economic enterprise, or (3) Did not follow and use the management and technical assistance... Indians BUREAU OF INDIAN AFFAIRS, DEPARTMENT OF THE INTERIOR ECONOMIC ENTERPRISES INDIAN BUSINESS...

Improving Vocational Curriculum.

ERIC Educational Resources Information Center

Duenk, Lester G., Ed.

This book provides guidelines for those responsible for the development of contemporary curriculum for instruction in vocational-technical fields. It is a compendium of the various systems of teaching and testing for students training for a variety of occupations requiring specialized knowledge and skill development. The guide consists of 12…

5 CFR 551.204 - Nonexemption of certain employees.

Code of Federal Regulations, 2010 CFR

2010-01-01

....204 Section 551.204 Administrative Personnel OFFICE OF PERSONNEL MANAGEMENT CIVIL SERVICE REGULATIONS... period of time on FLSA exemption status) or § 551.212 (Foreign exemption criteria)) because they do not..., technical skills and knowledge that can be acquired only through prolonged job training and experience, such...

25 CFR 286.17 - Grant limitations and requirements.

Code of Federal Regulations, 2010 CFR

2010-04-01

... Indians BUREAU OF INDIAN AFFAIRS, DEPARTMENT OF THE INTERIOR ECONOMIC ENTERPRISES INDIAN BUSINESS... of the enterprise to be funded and the knowledge and management skills of the applicant. (f) Grant... operation of the economic enterprise, or (3) Did not follow and use the management and technical assistance...

Integrating technical and non-technical skills coaching in an acute trauma surgery team training: Is it too much?

PubMed

Alken, Alexander; Luursema, Jan-Maarten; Weenk, Mariska; Yauw, Simon; Fluit, Cornelia; van Goor, Harry

2017-08-25

Research on effective integration of technical and non-technical skills in surgery team training is sparse. In a previous study we found that surgical teachers predominantly coached on technical and hardly on non-technical skills during the Definitive Surgical and Anesthetic Trauma Care (DSATC) integrated acute trauma surgery team training. This study aims to investigate whether the priming of teachers could increase the amount of non-technical skills coaching during such a training. Coaching activities of 12 surgical teachers were recorded on audio and video. Six teachers were primed on non-technical skills coaching prior to the training. Six others received no priming and served as controls. Blind observers reviewed the recordings of 2 training scenario's and scored whether the observed behaviors were directed on technical or non-technical skills. We compared the frequency of the non-technical skills coaching between the primed and the non-primed teachers and analyzed for differences according to the trainees' level of experience. Surgical teachers coached trainees during the highly realistic DSATC integrated acute trauma surgery team training. Trainees performed damage control surgery in operating teams on anesthetized porcine models during 6 training scenario's. Twelve experienced surgical teachers participated in this study. Coaching on non-technical skills was limited to about 5%. The primed teachers did not coach more often on non-technical skills than the non-primed teachers. We found no differences in the frequency of non-technical skills coaching based on the trainees' level of experience. Priming experienced surgical teachers does not increase the coaching on non-technical skills. The current DSATC acute trauma surgery team training seems too complex for integrating training on technical and non-technical skills. Patient care, Practice based learning and improvement. Copyright © 2017 Elsevier Inc. All rights reserved.

Technical communications in aerospace - An analysis of the practices reported by U.S. and European aerospace engineers and scientists

NASA Technical Reports Server (NTRS)

Pinelli, Thomas E.; Barclay, Rebecca O.; Kennedy, John M.; Glassman, Myron

1990-01-01

The flow of scientific and technical information (STI) at the individual, organizational, national, and international levels is studied. The responses of U.S and European aerospace engineers and scientists to questionnaires concerning technical communications in aerospace are examined. Particular attention is given to the means used to communicate information and the social system of the aerospace knowledge diffusion process. Demographic data about the survey respondents are provided. The methods used to communicate technical data and the sources utilized to solve technical problems are described. The importance of technical writing skills and the use of computer technology in the aerospace field are discussed. The derived data are useful for R&D and information managers in order to improve access to and utilization of aerospace STI.

Mentoring SFRM: A New Approach to International Space Station Flight Controller Training

NASA Technical Reports Server (NTRS)

Huning, Therese; Barshi, Immanuel; Schmidt, Lacey

2008-01-01

The Mission Operations Directorate (MOD) of the Johnson Space Center is responsible for providing continuous operations support for the International Space Station (ISS). Operations support requires flight controllers who are skilled in team performance as well as the technical operations of the ISS. Space Flight Resource Management (SFRM), a NASA adapted variant of Crew Resource Management (CRM), is the competency model used in the MOD. ISS flight controller certification has evolved to include a balanced focus on development of SFRM and technical expertise. The latest challenge the MOD faces is how to certify an ISS flight controller (operator) to a basic level of effectiveness in 1 year. SFRM training uses a two-pronged approach to expediting operator certification: 1) imbed SFRM skills training into all operator technical training and 2) use senior flight controllers as mentors. This paper focuses on how the MOD uses senior flight controllers as mentors to train SFRM skills. Methods: A mentor works with an operator throughout the training flow. Inserted into the training flow are guided-discussion sessions and on-the-job observation opportunities focusing on specific SFRM skills, including: situational leadership, conflict management, stress management, cross-cultural awareness, self care and team care while on-console, communication, workload management, and situation awareness. The mentor and operator discuss the science and art behind the skills, cultural effects on skills applications, recognition of good and bad skills applications, recognition of how skills application changes subtly in different situations, and individual goals and techniques for improving skills. Discussion: This mentoring program provides an additional means of transferring SFRM knowledge compared to traditional CRM training programs. Our future endeavors in training SFRM skills (as well as other organization s) may benefit from adding team performance skills mentoring. This paper explains our mentoring approach and discusses its effectiveness and future applicability in promoting SFRM/CRM skills.

Quantitative Evaluation of Performance in Interventional Neuroradiology: An Integrated Curriculum Featuring Theoretical and Practical Challenges

PubMed Central

Ernst, Marielle; Kriston, Levente; Romero, Javier M.; Frölich, Andreas M.; Jansen, Olav; Fiehler, Jens; Buhk, Jan-Hendrik

2016-01-01

Purpose We sought to develop a standardized curriculum capable of assessing key competencies in Interventional Neuroradiology by the use of models and simulators in an objective, quantitative, and efficient way. In this evaluation we analyzed the associations between the practical experience, theoretical knowledge, and the skills lab performance of interventionalists. Materials and Methods We evaluated the endovascular skills of 26 participants of the Advanced Course in Endovascular Interventional Neuroradiology of the European Society of Neuroradiology with a set of three tasks (aneurysm coiling and thrombectomy in a virtual simulator and placement of an intra-aneurysmal flow disruptor in a flow model). Practical experience was assessed by a survey. Participants completed a written and oral examination to evaluate theoretical knowledge. Bivariate and multivariate analyses were performed. Results In multivariate analysis knowledge of materials and techniques in Interventional Neuroradiology was moderately associated with skills in aneurysm coiling and thrombectomy. Experience in mechanical thrombectomy was moderately associated with thrombectomy skills, while age was negatively associated with thrombectomy skills. We found no significant association between age, sex, or work experience and skills in aneurysm coiling. Conclusion Our study gives an example of how an integrated curriculum for reasonable and cost-effective assessment of key competences of an interventional neuroradiologist could look. In addition to traditional assessment of theoretical knowledge practical skills are measured by the use of endovascular simulators yielding objective, quantitative, and constructive data for the evaluation of the current performance status of participants as well as the evolution of their technical competency over time. PMID:26848840

Representations in Simulated Workplaces

ERIC Educational Resources Information Center

van Schaik, Martijn; Terwel, Jan; van Oers, Bert

2014-01-01

In vocational education students are to be prepared to participate in communities of practice. Hence they need technical skills as well as content knowledge e.g. science and mathematics. Research has shown that the instructional strategy of guided co-construction may lead to deeper understandings within a practice. The research questions in this…

Developing POS via a Statewide Career-Focused Reform Policy

ERIC Educational Resources Information Center

Mobley, Catherine; Hammond, Cathy; Withington, Cairen; Stringfield, Sam; Stipanovic, Natalie; Sharp, Julia L.; Drew, Sam

2012-01-01

Career-focused education offered through programs of study (POS), career pathways, and career and technical education (CTE) can provide students with opportunities to engage in career exploration and development, to establish career goals, to increase academic knowledge and skills, to test career preferences in applied settings, and to make links…

Lithographic Stripping; Printing 2: 9755.03.

ERIC Educational Resources Information Center

Dade County Public Schools, Miami, FL.

The course is one of a group which provides 11th grade students with the general information, technical knowledge, basic skills, attitudes, and values required for job entry level in printing. The course is 90 hours in length. Course content includes goals, specific objectives, orientation, safety in the stripping department, and a stripping…

Automotive Body Fillers; Auto Body Repair and Refinishing 2: 9035.03.

ERIC Educational Resources Information Center

Dade County Public Schools, Miami, FL.

This course provides students with the general information, technical knowledge, basic skills, attitudes, and values required for job entry level as an auto body repair helper. Course content includes goals, specific objectives, orientation, filling with body solder, and plastic filler. A post-test sample is appended. (NH)

Platemaking; Printing 2: 9755.04.

ERIC Educational Resources Information Center

Dade County Public Schools, Miami, FL.

The course is one of a group which provides 11th grade students with the general information, technical knowledge, basic skills, attitudes, and values required for job entry level in the printing industry. Course content includes goals, specific objectives, orientation, types of lithographic plates, surface plates for offset, wipe-on plates,…

Business-Industry-Labor Involvement in Lifelong Vocational-Technical Education.

ERIC Educational Resources Information Center

Warmbrod, Catharine P.

The knowledge explosion dramatizes the need for education throughout peoples' lives, while technological change in particular fuels business, industry, and labor's imperative to cooperate closely with education to prepare people for work. In order to obtain the training, retraining, upgrading, and recycling of persons and skills, changes in work…

National Assessment Program--Science Literacy Year 6 Technical Report, 2006

ERIC Educational Resources Information Center

Wu, Margaret; Donovan, Jenny; Hutton, Penny; Lennon, Melissa

2008-01-01

In July 2001, the Ministerial Council on Education, Employment, Training and Youth Affairs (MCEETYA) agreed to the development of assessment instruments and key performance measures for reporting on student skills, knowledge and understandings in primary science. It directed the newly established Performance Measurement and Reporting Taskforce…

7 CFR 3400.21 - Scientific peer review for research activities.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 7 Agriculture 15 2011-01-01 2011-01-01 false Scientific peer review for research activities. 3400... § 3400.21 Scientific peer review for research activities. Scientific peer review is an evaluation of a... with the scientific knowledge and technical skills to conduct the proposed research work. Peer...

Measurement for Work. Teaching Guide and Sample Learning Activities.

ERIC Educational Resources Information Center

Angel, Margo; Bolton, Chris

This document is intended to help Australian technical and further education instructors in New South Wales (TAFE NSW) identify teaching principles and learning activities that they can use to help adult learners master the mathematics processes, knowledge, and skills needed to perform basic measurement tasks in today's workplace. The materials…

Practical Literacy Matters: Teacher Confidence Is Key

ERIC Educational Resources Information Center

Santamaria, Laura A.; Taylor, Marissa K.; Park, Travis D.; Keene, Barrett L.; van der Mandele, Elizabeth

2010-01-01

Literacy is important to career and technical education (CTE) teachers, who strive to integrate core academic and cognitive skills and knowledge into their classrooms. There is little question that educators need to continually address literacy within CTE. Rather, the issue for many CTE teachers and administrators becomes how to effectively…

Assessing the Impact of a Summer Internship Program for Teachers and Counselors.

ERIC Educational Resources Information Center

Russell, Jill F.; Reiser, Mary Lynn

1999-01-01

Discusses an evaluation of a summer internship program for Omaha, Nebraska, educators that stressed scientific/technical work experience. Results suggest that internship programs can provide a growth experience for teachers and can positively influence students' knowledge, skills, and readiness for the world of work. (MLH)

Supporting the Educational Needs of Students with Orthopedic Impairments.

ERIC Educational Resources Information Center

Heller, Kathryn Wolff; Swinehart-Jones, Dawn

2003-01-01

This article provides information on orthopedic impairments and the unique knowledge and skills required to provide these students with an appropriate education. Information on current practice is provided, as well as training and technical assistance models that can be used to help provide teachers with the necessary training. (Contains…

AADE position statement: education for continuous subcutaneous insulin infusion pump users. American Association of Diabetes Educators.

PubMed

1997-01-01

Successful implementation of CSII requires a motivated patient with a range of technical skills and self-management capabilities. Patients develop this expertise through an ongoing program of education and the support that a healthcare team knowledgeable in insulin pump therapy can provide.

A Research Proposal to Evaluate the Merits of Writing across the Curriculum

ERIC Educational Resources Information Center

Dana, Heather; Hancock, Carol; Phillips, JoDee

2011-01-01

Students live in an information and knowledge management economy in which the dissemination and analysis of information requires intellectual, technical and interpersonal skills. As a direct response to higher education's challenge to produce more engineers, scientists, and business professionals, universities have increased the numbers of…

Digital Literacy and Informal Learning Environments: An Introduction

ERIC Educational Resources Information Center

Meyers, Eric M.; Erickson, Ingrid; Small, Ruth V.

2013-01-01

New technologies and developments in media are transforming the way that individuals, groups and societies communicate, learn, work and govern. This new socio-technical reality requires participants to possess not only skills and abilities related to the use of technological tools, but also knowledge regarding the norms and practices of…

Technologies of the '80s: Their Impact on Technical Occupations.

ERIC Educational Resources Information Center

Jaffe, J. A., Ed.; And Others

This report is one of seven that identify major new and emerging technological advances expected to influence major vocational education program areas and to describe the programmatic implications in terms of skill-knowledge requirements, occupations most directly affected, and the anticipated diffusion rate. Chapter 1 considers technology as…

Looking at Learning as Preparation for Teaching

ERIC Educational Resources Information Center

Hughes-McDonnell, Fiona J.

2016-01-01

One of the more heated and consequential debates in teacher education today concerns the instructional methods used in preparation programs and the knowledge and skills that teacher candidates should acquire. In this study, I examine looking at learning as a pedagogical approach to transition teacher candidates from the technical conceptions of…

Retention and Professional Mentoring of Beginning Career and Technical Education Teachers

ERIC Educational Resources Information Center

Mordan, Benjamin R.

2012-01-01

A fundamental requirement for providing quality education in schools is to encourage highly qualified individuals with the necessary knowledge and skill to enter the teaching profession and remain employed in this occupation. Attracting and retaining effective teachers has historically presented a considerable challenge for schools across many…

Quantitative Comparisons to Promote Inquiry in the Introductory Physics Lab

ERIC Educational Resources Information Center

Holmes, N. G.; Bonn, D. A.

2015-01-01

In a recent report, the American Association of Physics Teachers has developed an updated set of recommendations for curriculum of undergraduate physics labs. This document focuses on six major themes: constructing knowledge, modeling, designing experiments, developing technical and practical laboratory skills, analyzing and visualizing data, and…

Defining and Measuring Creativity: Are Creativity Tests Worth Using?

ERIC Educational Resources Information Center

Cropley, Arthur J.

2000-01-01

This article argues that creativity tests are best thought of as measures of creative potential because creative achievement depends on additional factors not measured by creativity tests, such as technical skill, field knowledge, mental health, and opportunity. The need for assessment to be based on several tests is emphasized. (Contains…

Nurturing Soft Skills Among High School Students Through Space Weather Competition

NASA Astrophysics Data System (ADS)

Abdullah, Mardina; Abd Majid, Rosadah; Bais, Badariah; Syaidah Bahri, Nor

2016-07-01

Soft skills fulfill an important role in shaping an individual's personality. It is of high importance for every student to acquire adequate skills beyond academic or technical knowledge. The objective of this project was to foster students' enthusiasm in space science and develop their soft skills such as; interpersonal communication, critical thinking and problem-solving, team work, lifelong learning and information management, and leadership skills. This is a qualitative study and the data was collected via group interviews. Soft skills development among high school students were nurtured through space weather competition in solar flare detection. High school students (16 to 17 years old) were guided by mentors consisting of science teachers to carry out this project based on a module developed by UKM's researchers. Students had to acquire knowledge on antenna development and construct the antenna with recyclable materials. They had to capture graphs and identify peaks that indicate solar flare. Their findings were compared to satellite data for verification. They also presented their work and their findings to the panel of judges. After observation, it can be seen that students' soft skills and interest in learning space science had become more positive after being involved in this project.

Multidisciplinary crisis simulations: the way forward for training surgical teams.

PubMed

Undre, Shabnam; Koutantji, Maria; Sevdalis, Nick; Gautama, Sanjay; Selvapatt, Nowlan; Williams, Samantha; Sains, Parvinderpal; McCulloch, Peter; Darzi, Ara; Vincent, Charles

2007-09-01

High-reliability organizations have stressed the importance of non-technical skills for safety and of regularly providing such training to their teams. Recently safety skills training has been applied in the practice of medicine. In this study, we developed and piloted a module using multidisciplinary crisis scenarios in a simulated operating theatre to train entire surgical teams. Twenty teams participated (n = 80); each consisted of a trainee surgeon, anesthetist, operating department practitioner (ODP), and scrub nurse. Crisis scenarios such as difficult intubation, hemorrhage, or cardiac arrest were simulated. Technical and non-technical skills (leadership, communication, team skills, decision making, and vigilance), were assessed by clinical experts and by two psychologists using relevant technical and human factors rating scales. Participants received technical and non-technical feedback, and the whole team received feedback on teamwork. Trainees assessed the training favorably. For technical skills there were no differences between surgical trainees' assessment scores and the assessment scores of the trainers. However, nurses overrated their technical skill. Regarding non-technical skills, leadership and decision making were scored lower than the other three non-technical skills (communication, team skills, and vigilance). Surgeons scored lower than nurses on communication and teamwork skills. Surgeons and anesthetists scored lower than nurses on leadership. Multidisciplinary simulation-based team training is feasible and well received by surgical teams. Non-technical skills can be assessed alongside technical skills, and differences in performance indicate where there is a need for further training. Future work should focus on developing team performance measures for training and on the development and evaluation of systematic training for technical and non-technical skills to enhance team performance and safety in surgery.

The importance of comprehensive agricultural education in land-grant institutions: a historical perspective.

PubMed

Grant, P M; Field, T G; Green, R D; Rollin, B E

2000-06-01

Any thorough examination of the present and future of agricultural education must certainly begin with a look into its past. Since the creation of the United States, many leading American philosophers have viewed a strong agrarian culture as the bedrock of American vigor. These same philosophers repeatedly noted the significance of comprehensive agricultural education to a nation rich in agricultural wealth. The signing of the Agricultural Colleges Act legitimized the concept of formal education in the agricultural sciences and provided funding for such education. The Act, which came to be known as the Morrill Act, after one of its primary authors, stressed the importance of comprehensive education. In fact, the inclusion of liberal studies was specifically mentioned in the Morrill Act and was defended repeatedly by Morrill himself. Comprehensive education prevented graduating technically trained students who were lacking in the basic outcomes of education--critical, comprehensive problem solving, cohesive thought, and effective communication. However, throughout history, the demands of a growing population coupled with rapid advancements in scientific knowledge led to a gradual move away from comprehensive education in agricultural sciences toward increasing specialization, resulting in more narrowly trained students. Today's agricultural students are technically well versed but often lack the skill and knowledge required for cohesive thought and critical problem solving. Addressing the multitude of challenges facing leaders in the future of agriculture requires much more than technical skill. These challenges require quick, yet careful thinkers and communicators who can respond to changing market structure and consumer demand in a dynamic way. Students who are a product of a conscious move toward amalgamation of burgeoning scientific knowledge and technical prowess with an integrative education emphasizing relationships between disciplines would better serve tomorrow's agriculture.

A Fresh Cadaver Model for the Instruction of Ultrasound-Guided Fine-Needle Aspiration of Thyroid Nodules.

PubMed

McCrary, Hilary C; Faucett, Erynne A; Hurbon, Audriana N; Milinic, Tijana; Cervantes, Jose A; Kent, Sean L; Adamas-Rappaport, William J

2017-07-01

Objective The aim of our study is to determine if a fresh cadaver model (FCM) for the instruction of ultrasound (US)-guided fine-needle aspiration (FNA) of thyroid nodules is a practical method for instruction. Study Design Pre- and postinstruction assessment of medical students' ability to perform US-guided FNA of artificially created thyroid nodules placed adjacent to the thyroid gland of a fresh cadaver. Setting University-based fresh cadaver laboratory. Subjects and Methods Study participants included a total of 17 first- and second-year medical students with minimal US training. Technical skills were assessed using a 10-item checklist. In addition, a cognitive assessment regarding the indications, contraindications, and complications of the procedure was completed. A postinstruction assessment was provided for participants 5 weeks after their initial assessment. Differences between pre- and postinstruction assessment scores of technical skills were analyzed using McNemar's test. The mean cognitive knowledge gain was analyzed using a paired 2-sample t test. Results Eight of 10 items on the skills checklist were statistically significant between pre- and postinstruction skills assessment ( P < .05). There was a statistically significant change in cognitive knowledge gain regarding the contraindications of the procedure ( P = .001), but not for indications or complications ( P = .104 and P = .111, respectively). Conclusion US-guided FNA continues to be an important diagnostic procedure in the workup of thyroid nodules, making it an essential skill to integrate into surgical skills lab. Our FCM for the instruction of US-guided FNA is the first of its kind, and this pilot study shows this is a viable method for instruction.

Assessment of technical and nontechnical skills in surgical residents.

PubMed

Ponton-Carss, Alicia; Kortbeek, John B; Ma, Irene W Y

2016-11-01

Surgical competence encompasses both technical and nontechnical skills. This study seeks to evaluate the validity evidence for a comprehensive surgical skills examination and to examine the relationship between technical and nontechnical skills. Six examination stations assessing both technical and nontechnical skills, conducted yearly for surgical trainees (n = 120) between 2010 and 2014 are included. The assessment tools demonstrated acceptable internal consistency. Interstation reliability for technical skills was low (alpha = .39). Interstation reliability for the nontechnical skills was lower (alpha range -.05 to .31). Nontechnical skills domains were strongly correlated, ranging from r = .65, P < .001 to .86, P < .001. The associations between nontechnical and technical skills were inconsistent, ranging from poor (r = -.06; P = .54) to moderate (r = .45; P < .001). Multiple samplings of integrated technical and nontechnical skills are necessary to assess overall surgical competency. Copyright © 2016 Elsevier Inc. All rights reserved.

[Simulation training in pulmonary medicine: Rationale, review of the literature and perspectives].

PubMed

Hureaux, J; Urban, T

2015-12-01

Training in pulmonary medicine requires the acquisition of a great deal of knowledge, but also technical know-how and interpersonal skills. The prevailing teaching pattern is mentorship. It implies a direct transmission of knowledge, but also entails some drawbacks such as disparity in learning opportunities, subjective evaluation of the trainee and potential risks for patients. There is growing interest in simulation training as a teaching technique, where students practice their skills in a secure environment, then analyse their performance in a debriefing session. It is complementary to other learning methods (abstraction, observation or mentorship) and forms part of an ethical approach: 'never practice on a real patient for the first time'. We have reviewed the literature related to simulation training in pulmonary medicine and in particular for physical examination, technical skills, pathologies, communication with patients and therapeutic education. In most of the studies, simulation training is a way of speeding up students' training - without necessarily yielding better results - and of respecting the procedures. We then present the French regulations and official guidelines regarding the use of this training method in the teaching of medicine. Finally, we shall consider some prospects of this approach for the community of pulmonologists. Copyright © 2015 SPLF. Published by Elsevier Masson SAS. All rights reserved.

NASA/DOD Aerospace Knowledge Diffusion Research Project. Paper 40: Technical communications in aerospace education: A study of AIAA student members

NASA Technical Reports Server (NTRS)

Kennedy, John M.; Pinelli, Thomas E.; Barclay, Rebecca O.

1994-01-01

This paper describes the preliminary analysis of a survey of the American Institute of Aeronautics and Astronautics (AIAA) student members. In the paper we examine (1) the demographic characteristics of the students, (2) factors that affected their career decisions, (3) their career goals and aspirations, and (4) their training in technical communication and techniques for finding and using aerospace scientific and technical information (STI). We determine that aerospace engineering students receive training in technical communication skills and the use of STI. While those in the aerospace industry think that more training is needed, we believe the students receive the appropriate amount of training. We think that the differences between the amount of training students receive and the perception of training needs is related partially to the characteristics of the students and partially to the structure of the aerospace STI dissemination system. Overall, we conclude that the students' technical communication training and knowledge of STI, while limited by external forces, makes it difficult for students to achieve their career goals.

Rotation placements help students' understanding of intensive care.

PubMed

Abbott, Lisa

2011-07-01

It is vital that children's nursing students are fit for practice when they qualify and are able to meet various essential skills as defined by the Nursing and Midwifery Council (NMC). To gain the knowledge and skills required, students need placements in areas where high dependency and potentially intensive care are delivered. Efforts to maximise the number of students experiencing intensive care as a placement have led to the development of the paediatric intensive care unit (PICU) rotation, increasing placements on the PICU from 5 to 40 per cent of the student cohort per year. The lecturer practitioner organises the rotation, providing credible links between university and practice areas, while supporting students and staff in offering a high-quality placement experience. Students say the rotation offers a positive insight into PICU nursing, helping them develop knowledge and skills in a technical area and creating an interest in this specialty.

Comprehensive Surgical Coaching Enhances Surgical Skill in the Operating Room: A Randomized Controlled Trial.

PubMed

Bonrath, Esther M; Dedy, Nicolas J; Gordon, Lauren E; Grantcharov, Teodor P

2015-08-01

The aim of the study was to determine whether individualized coaching improved surgical technical skill in the operating room to a higher degree than current residency training. Clinical training in the operating room is a valuable opportunity for surgeons to acquire skill and knowledge; however, it often remains underutilized. Coaching has been successfully used in various industries to enhance performance, but its role in surgery has been insufficiently investigated. This randomized controlled trial was conducted at one surgical training program. Trainees undergoing a minimally invasive surgery rotation were randomized to either conventional training (CT) or comprehensive surgical coaching (CSC). CT included ward and operating room duties, and regular departmental teaching sessions. CSC comprised performance analysis, debriefing, feedback, and behavior modeling. Primary outcome measures were technical performance as measured on global and procedure-specific rating scales, and surgical safety parameters, measured by error count. Operative performance was assessed by blinded video analysis of the first and last cases recorded by the participants during their rotation. Twenty residents were randomized and 18 completed the study. At posttraining the CSC group (n = 9) scored significantly higher on a procedure-specific skill scale compared with the CT group (n = 9) [median, 3.90 (interquartile range, 3.68-4.30) vs 3.60 (2.98-3.70), P = 0.017], and made fewer technical errors [10 (7-13) vs 18 (13-21), P = 0.003]. Significant within-group improvements for all skill metrics were only noted in the CSC group. Comprehensive surgical coaching enhances surgical training and results in skill acquisition superior to conventional training.

Identifying management competencies for health care executives: review of a series of Delphi studies.

PubMed

Hudak, R P; Brooke, P P; Finstuen, K

2000-01-01

This analysis reviews a selected body of research that identifies the essential areas of management expertise required of future health care executives. To ensure consistency, six studies are analyzed, utilizing the Delphi technique, to query a broad spectrum of experts in different fields and sites of health care management. The analysis identifies a number of management competencies, i.e., managerial capabilities, which current and aspiring health care executives, in various settings and with differing educational backgrounds, should possess to enhance the probability of their success in current and future positions of responsibility. In addition, this review identifies the skills (technical expertise), knowledge (facts and principles) and abilities (physical, mental or legal power) required to support achievement of these competencies. Leadership and resource management, including cost and finance dimensions, are the highest-rated requisite management competencies. The dominant skills, knowledge and abilities (SKAs) are related to interpersonal skills. The lowest-rated SKAs are related to job-specific, technical skills. Recommendations include the review of this research by formal and continuing education programs to determine the content of their courses and areas for future research. Similarly, current health care executives should assess this research to assist in identifying competency gaps. Lastly, this analysis recommends that the Delphi technique, as a valid and replicable methodology, be applied toward the study of non-executive health care managers, e.g., students, clinicians, mid-level managers and integrated systems administrators, to determine their requisite management competencies and SKAs.

Motor-Reducer Sizing through a MATLAB-Based Graphical Technique

ERIC Educational Resources Information Center

Giberti, H.; Cinquemani, S.

2012-01-01

The design of the drive system for an automatic machine and its correct sizing is a very important competence for an electrical or mechatronic engineer. This requires knowledge that crosses the fields of electrical engineering, electronics and mechanics, as well as the skill to choose commercial components based upon their technical documentation.…

Establishment of Institutional Policies for Enhancing Education Quality in Cambodian Universities

ERIC Educational Resources Information Center

Rany, Sam; Zain, Ahmad Nurulazam Md; Jamil, Hazri

2012-01-01

In the context of global and national economic development, higher education in Cambodia plays a significant role to develop human capital with technical knowledge, skills, values, and attitudes for sustainable economic growth, social development, and alleviation of poverty. When the civil war in 1998 was over, the Royal Government of Cambodia…

Tech Reading/Small Engines: Performance Package, Minnesota Profile of Learning.

ERIC Educational Resources Information Center

Minnesota State Dept. of Children, Families, and Learning, St. Paul.

Developed by classroom teachers during the development phase of Minnesota's Graduation Standards, this performance package is made up of locally designed assignments that, taken together, show whether a student has learned and can apply the knowledge and skills related to technical reading regarding small engines. It begins with reference to the…

Values Education and the Board of Education for the City of Hamilton.

ERIC Educational Resources Information Center

Kocmarek, Ivan; Barrs, Steve

1988-01-01

Describes a values education program developed in the city of Hamilton, Ontario. Advocates removing values education from the realm of the hidden curriculum as found in the traditional school model of knowledge of facts, mastery of technical skills, and awareness of attitudes. Emphasizes the importance of continual interaction between school and…

Vocational Electronics Second Year Teacher's Guide and Student Workbook.

ERIC Educational Resources Information Center

Solanik, Chuck

This guide is intended to help teachers give preparatory instruction in the development of basic manipulative skills, safety practices, technical knowledge, and related industrial information in order to prepare students for useful employment in the field of electronics. This second-year guide contains 7 units organized into 21 lesson plans. Each…

Digital Equity and Intercultural Education

ERIC Educational Resources Information Center

Resta, Paul; Laferrière, Thérèse

2015-01-01

Digital equity and intercultural education continue to be areas of concern in the emerging knowledge-based society. The digital divide is present across the globe as the result of a complex of factors such as the inequality in: access to hardware and connectivity; autonomy of use; digital and literacy skills; availability of technical and social…

AUTOMOTIVE DIESEL MAINTENANCE 2. UNIT I, UNDERSTANDING MECHANICAL CLUTCHES.

ERIC Educational Resources Information Center

Minnesota State Dept. of Education, St. Paul. Div. of Vocational and Technical Education.

ONE OF A 25-MODULE COURSE DESIGNED TO UPGRADE THE JOB SKILLS AND TECHNICAL KNOWLEDGE OF DIESEL MAINENANCE MECHANICS THIS MATERIAL WAS DEVELOPED BY INDUSTRIAL TRAINING AND SUBJECT-MATTER SPECIALISTS AND TESTED IN INDUSTRIAL TRAINING SITUATIONS. THE PURPOSE OF THIS FIRST UNIT IS TO DEVELOP AN UNDERSTANDING OF COMPONENTS, OPERATION, AND ADJUSTMENTS…

Cultivating Our Own: Helping Dreams Become a Reality

ERIC Educational Resources Information Center

Decken, Grace

2012-01-01

For many students, participating in a Career and Technical Student Organization empowers them with knowledge and skills they find invaluable in college and careers. In this article, the author talks about some of her student success stories and their participation in Health Occupations Students of America. She begins by discussing the role of…

A Study on Relationship between Personality Traits and Employment Factors of College Students

ERIC Educational Resources Information Center

Kai-Wen, Cheng

2011-01-01

The goal of vocational education is to enhance students' professional knowledge, technical skills, and professional ethics to make them readily available for employment and capable of satisfying the needs of economic constructions. Vocational education plays an important role in guiding and assisting students in seeking employment. However, in…

Engineers of the Future: The Colorado School of Mines' McBride Honors Program.

ERIC Educational Resources Information Center

Olds, Barbara M.

1988-01-01

More educators argue that science and technology students must be more liberally educated. The McBride Honors Program at Colorado School of Mines addresses the needs of a global society by preparing engineers to be technically competent, with strong communication skills, and knowledge of societal issues. (MLW)

Examining the Factors of a Technology Professional Development Intervention

ERIC Educational Resources Information Center

Unger, Kelly L.

2012-01-01

In response to the ever increasing demand to compete in a global economy, the United States needs to prepare its students with the appropriate technical knowledge and communication skills to be competitive in the 21st century (Watson, 2007). Students must begin utilizing current technology tools during their K-12 educational experience and online…

Effective University Leadership as Predictor of Academic Excellence in Southern Nigerian Universities

ERIC Educational Resources Information Center

Ofoegbu, Felicia O.; Alonge, Hezekiah O.

2017-01-01

The University is an educational system where high level manpower is trained for socio-economic and political growth of any nation. The leadership of a University plays invaluable roles in achieving academic excellence in dissemination and acquisition of universal knowledge, values; functional, technical and scientific skills and competencies…

TVET Teacher Professionalism in Leadership Personality Formation

ERIC Educational Resources Information Center

Muhammad, Siti Nur Hidayah; Jaafar, Siti Norain

2015-01-01

This study aims to look at the professionalism of teachers in Technical and Vocational Education and their role as teachers. Applying leadership personality drove to the skills of the teachers. Therefore, this article is important in helping the teachers TVET build basic knowledge with respect to the leadership personality who should be planted…

External Degree Project. Summaries of Areas of Competency in Business Administration.

ERIC Educational Resources Information Center

Syracuse Univ., NY. School of Management.

The School of Management at Syracuse University recently undertook the task of classifying the kinds of competency one should demonstrate in order to function effectively in positions within the field of Business Administration. The study is aimed at identifying the mix of technical skills, general ability, and background knowledge that fits…

Developing Theory to Guide Building Practitioners' Capacity to Implement Evidence-Based Interventions

ERIC Educational Resources Information Center

Leeman, Jennifer; Calancie, Larissa; Kegler, Michelle C.; Escoffery, Cam T.; Herrmann, Alison K.; Thatcher, Esther; Hartman, Marieke A.; Fernandez, Maria E.

2017-01-01

Public health and other community-based practitioners have access to a growing number of evidence-based interventions (EBIs), and yet EBIs continue to be underused. One reason for this underuse is that practitioners often lack the capacity (knowledge, skills, and motivation) to select, adapt, and implement EBIs. Training, technical assistance, and…

A Modest Proposal for Improving the Education of Reading Teachers. Technical Report No. 487.

ERIC Educational Resources Information Center

Anderson, Richard C.; And Others

A gap exists between talk about teaching that is featured in most preservice teacher education and the working knowledge and problem-solving expertise that characterize skilled teaching. This gap exists because typical teacher training does not embody the principles of modeling, coaching, scaffolding, articulation, and reflection. Three methods…

Vocational Electronics First Year Teacher's Guide and Student Workbook.

ERIC Educational Resources Information Center

Solanik, Chuck

This guide is intended to help teachers give preparatory instruction in the development of basic manipulative skills, safety practices, technical knowledge, and related industrial information in order to prepare students for useful employment in the field of electronics. This first-year guide contains 6 units organized in 21 lesson plans. Each…

Organizational Change, Informal Learning, and Adaptation: Emerging Trends in Training and Continuing Education.

ERIC Educational Resources Information Center

Kozlowski, Steve W. J.

1995-01-01

Trends such as technological innovation, downsizing, self-managed teams, and continuous learning imply that in continuing education technical content must be considered in the context in which skills are used. Knowledge of learning processes and workplace socialization suggests that formal training and informal learning must be integrated to…

A Programme for Future Audit Professionals: Using Action Research to Nurture Student Engagement

ERIC Educational Resources Information Center

Van Peursem, Karen; Samujh, R. Helen; Nath, Nirmala

2016-01-01

Professionals require decision-making skills as well as technical knowledge. One might assume that their university education prepares them for this role yet, and least for future audit professionals, traditional text--and lecture--methods dominate teaching practice. This Participation Action Research study develops with auditing students a…

Initiating technical refinements in high-level golfers: Evidence for contradictory procedures.

PubMed

Carson, Howie J; Collins, Dave; Richards, Jim

2016-01-01

When developing motor skills there are several outcomes available to an athlete depending on their skill status and needs. Whereas the skill acquisition and performance literature is abundant, an under-researched outcome relates to the refinement of already acquired and well-established skills. Contrary to current recommendations for athletes to employ an external focus of attention and a representative practice design,  Carson and  Collins' (2011) [Refining and regaining skills in fixation/diversification stage performers: The Five-A Model. International Review of Sport and Exercise Psychology, 4, 146-167. doi: 10.1080/1750984x.2011.613682 ] Five-A Model requires an initial narrowed internal focus on the technical aspect needing refinement: the implication being that environments which limit external sources of information would be beneficial to achieving this task. Therefore, the purpose of this paper was to (1) provide a literature-based explanation for why techniques counter to current recommendations may be (temporarily) appropriate within the skill refinement process and (2) provide empirical evidence for such efficacy. Kinematic data and self-perception reports are provided from high-level golfers attempting to consciously initiate technical refinements while executing shots onto a driving range and into a close proximity net (i.e. with limited knowledge of results). It was hypothesised that greater control over intended refinements would occur when environmental stimuli were reduced in the most unrepresentative practice condition (i.e. hitting into a net). Results confirmed this, as evidenced by reduced intra-individual movement variability for all participants' individual refinements, despite little or no difference in mental effort reported. This research offers coaches guidance when working with performers who may find conscious recall difficult during the skill refinement process.

A Procedural Skills OSCE: Assessing Technical and Non-Technical Skills of Internal Medicine Residents

ERIC Educational Resources Information Center

Pugh, Debra; Hamstra, Stanley J.; Wood, Timothy J.; Humphrey-Murto, Susan; Touchie, Claire; Yudkowsky, Rachel; Bordage, Georges

2015-01-01

Internists are required to perform a number of procedures that require mastery of technical and non-technical skills, however, formal assessment of these skills is often lacking. The purpose of this study was to develop, implement, and gather validity evidence for a procedural skills objective structured clinical examination (PS-OSCE) for internal…

Impact of a simulation training curriculum on technical and nontechnical skills in colonoscopy: a randomized trial.

PubMed

Grover, Samir C; Garg, Ankit; Scaffidi, Michael A; Yu, Jeffrey J; Plener, Ian S; Yong, Elaine; Cino, Maria; Grantcharov, Teodor P; Walsh, Catharine M

2015-12-01

GI endoscopy simulation-based training augments early clinical performance; however, the optimal manner by which to deliver training is unknown. We aimed to validate a simulation-based structured comprehensive curriculum (SCC) designed to teach technical, cognitive, and integrative competencies in colonoscopy. Single-blinded, randomized, controlled trial. Endoscopic simulation course at an academic hospital. Thirty-three novice endoscopists were allocated to an SCC group or self-regulated learning (SRL) group. The SCC group received a curriculum consisting of 6 hours of didactic lectures and 8 hours of virtual reality simulation-based training with expert feedback. The SRL group was provided a list of desired objectives and was instructed to practice on the simulator for an equivalent time (8 hours). Clinical transfer was assessed during 2 patient colonoscopies using the Joint Advisory Group Direct Observation of Procedural Skills (JAG DOPS) scale. Secondary outcome measures included differences in procedural knowledge, immediate post-training simulation performance, and delayed post-training (4-6 weeks) performance during an integrated scenario test on the JAG DOPS communication and integrated scenario global rating scales. There was no significant difference in baseline or post-training performance on the simulator task. The SCC group performed superiorly during their first and second clinical colonoscopies. Additionally, the SCC group demonstrated significantly better knowledge and colonoscopy-specific performance, communication, and global performance during the integrated scenario. We were unable to measure SRL participants' effort outside of mandatory training. In addition, feedback metrics and number of available simulation cases are limited. These results support integration of endoscopy simulation into a structured curriculum incorporating instructional feedback and complementary didactic knowledge as a means to augment technical, cognitive, and integrative skills acquisition, as compared with SRL on virtual reality simulators. ( NCT01991522.) Copyright © 2015 American Society for Gastrointestinal Endoscopy. Published by Elsevier Inc. All rights reserved.

Organizational Culture - Education of the Department of Defense Program Managers Under Defense Acquisition Workforce Improvement Act

DTIC Science & Technology

1993-01-01

ability to recognize unstated assumptions. Skill in distinguishing facts from hypotheses. 4.20 Analyses Of Relationships The connections and interactions...technical and business knowledge while lacking in appreciation and knowledge of self and relationship with others. (Attachment C) (10) 16 CONCLUSION...N = 15.00 300.0 320.0 340.0 360.0 380.0 400.0 420.0 Perry Level 24 Mar 94 SPSS for MS WINDOWS Release 6.0 Page 10 MBTI: 8 INTP PERRY1 Perry Level

Non-technical skills and health care provision in low- and middle-income countries: a systematic review.

PubMed

Scott, John; Revera Morales, Dianali; McRitchie, Andrew; Riviello, Robert; Smink, Douglas; Yule, Steven

2016-04-01

Health care workers must possess high levels of medical knowledge, technical skills and also non-technical skills (NTS) in order to provide safe, effective and patient-centred care. Although there has been a recent proliferation of NTS assessment and training tools developed in high-income countries, little is known about NTS in low- and middle-income countries (LMICs), which face a variety of provider-level and system-level challenges. The aim of this study was to identify the NTS used by providers in LMICs that have been studied, describe how they are assessed and taught, and explain the contextual factors in LMICs that affect their use. We conducted a systematic literature review in accordance with preferred reporting items for systematic reviews and meta-analyses guidelines for primary research publications from January 1994 to December 2013 on evaluation or teaching of NTS used by health care workers in LMICs using MEDLINE, Embase, CIHHAL and Web of Science. Bibliographies of relevant manuscripts were also hand-searched to identify all potentially eligible manuscripts. We identified 21 manuscripts from 17 LMICs involving eight types of health care providers and trainees. These studies covered five NTS categories: decision making, communication, teamwork, leadership and stress management. The most commonly used methods were questionnaires, interviews and observations, and 43% (n = 9) scored > 10 points using the Medical Education Research Study Quality Instrument. Although many studies highlighted the ways in which overburdened health care systems, lack of provider empowerment and deficiencies in provider training had an impact on providers' use of these NTS, no context-specific assessment or educational tools were identified. There is growing worldwide interest in understanding and teaching critical non-technical skills to health care providers. This review highlights several studies describing a variety of important non-technical skills. However, these skills must be further characterised in order to develop context-specific tools for assessing and teaching NTS that are sensitive to the local challenges that are common across a variety of LMIC contexts. © 2016 John Wiley & Sons Ltd.

Are leaders portable?

PubMed

Groysberg, Boris; McLean, Andrew N; Nohria, Nitin

2006-05-01

Does management talent transfer from one company to another? The market certainly seems to think so. Stock prices spike when companies announce new CEOs from a talent generator like General Electric. But how do these executives perform over the long term? The authors studied the careers of 20 former GE executives who went on to lead other major organizations, with strikingly uneven results. Even the best management talent, the authors found, is transferable only if it maps to the challenges of the new environment. More specifically, the authors identified five types of skills that may or may not transfer to a new job: general management human capital, or the skills to gather, cultivate, and deploy financial, technical, and human resources; strategic human capital, or individuals' expertise in cost cutting, growth, or cyclical markets; industry human capital, meaning the technical and regulatory knowledge unique to an industry; relationship human capital, or the extent to which a manager's effectiveness can be attributed to his or her experience working with colleagues or as part of a team; and company-specific human capital, or the knowledge about routines and procedures, corporate culture and informal structures, and systems and processes that are unique to a company. The GE executives' performance as CEOs depended on whether their new organizations were able to leverage each type of skill. The authors'findings challenge the conventional wisdom on human capital, which holds that there are two types of skill: general management, which is readily transferable, and company specific, which is not. In fact, they argue, other types of management capabilities can make a significant contribution to performance, and company-specific skills can be an asset in a new job.

The Imperial Paediatric Emergency Training Toolkit (IPETT) for use in paediatric emergency training: development and evaluation of feasibility and validity.

PubMed

Lambden, Simon; DeMunter, Claudine; Dowson, Anne; Cooper, Mehrengise; Gautama, Sanjay; Sevdalis, Nick

2013-06-01

To develop and test the feasibility, reliability, and validity of a practical toolkit for the assessment and feedback of skills required to manage paediatric emergencies in critical care settings. The Imperial Paediatric Emergency Training Toolkit (IPETT) was developed based on current evidence-base and expert input. IPETT assesses both technical and non-technical skills. The technical component covers skills in the areas of clinical assessment, airway and breathing, cardiovascular, and drugs. The non-technical component is based on the validated NOTECHS tool and covers communication and interaction, cooperation and team skills, leadership and managerial skills, and decision-making. The reliability (internal consistency), content validity (inter-correlations between different skills) and concurrent validity (correlations between global technical and non-technical scores) of IPETT were prospectively evaluated in 45 simulated paediatric crises carried out in a PICU with anaesthetic and paediatric trainees (N=52). Non-parametric analyses were carried out. Significance was set at P<0.05. Cronbach alpha reliability coefficients were overall acceptable for the technical (alpha range=0.638-0.810) and good for the non-technical (alpha range=0.701-0.899) component of IPETT. The median inter-skill correlation was rho=0.564 and rho=0.549 for the technical and non-technical components, respectively. These indicate good content validity, as the skills were inter-related but not redundant. We also demonstrate a correlation between the global technical and non-technical scores (rho=0.471) - all Ps<0.05 during the assessments. IPETT offers a psychometrically viable and feasible to use tool in the context of paediatric emergencies training. This study shows that assessment of technical and non-technical skills in combination may offer a more clinically relevant model for training in paediatric emergencies. Further validation should aim to demonstrate skill retention over time and skill transfer from simulation-based training to real emergencies. Copyright © 2013. Published by Elsevier Ireland Ltd.

Alaska's Secondary Science Teachers and Students Receive Earth Systems Science Knowledge, GIS Know How and University Technical Support for Pre- College Research Experiences: The EDGE Project

NASA Astrophysics Data System (ADS)

Connor, C. L.; Prakash, A.

2007-12-01

Alaska's secondary school teachers are increasingly required to provide Earth systems science (ESS) education that integrates student observations of local natural processes related to rapid climate change with geospatial datasets and satellite imagery using Geographic Information Systems (GIS) technology. Such skills are also valued in various employment sectors of the state where job opportunities requiring Earth science and GIS training are increasing. University of Alaska's EDGE (Experiential Discoveries in Geoscience Education) program has provided training and classroom resources for 3 cohorts of inservice Alaska science and math teachers in GIS and Earth Systems Science (2005-2007). Summer workshops include geologic field experiences, GIS instruction, computer equipment and technical support for groups of Alaska high school (HS) and middle school (MS) science teachers each June and their students in August. Since 2005, EDGE has increased Alaska science and math teachers' Earth science content knowledge and developed their GIS and computer skills. In addition, EDGE has guided teachers using a follow-up, fall online course that provided more extensive ESS knowledge linked with classroom standards and provided course content that was directly transferable into their MS and HS science classrooms. EDGE teachers were mentored by University faculty and technical staff as they guided their own students through semester-scale, science fair style projects using geospatial data that was student- collected. EDGE program assessment indicates that all teachers have improved their ESS knowledge, GIS knowledge, and the use of technology in their classrooms. More than 230 middle school students have learned GIS, from EDGE teachers and 50 EDGE secondary students have conducted original research related to landscape change and its impacts on their own communities. Longer-term EDGE goals include improving student performance on the newly implemented (spring 2008) 10th grade, standards-based, High School Qualifying Exam, on recruiting first-generation college students, and on increasing the number of Earth science majors in the University of Alaska system.

Teaching and assessing procedural skills using simulation: metrics and methodology.

PubMed

Lammers, Richard L; Davenport, Moira; Korley, Frederick; Griswold-Theodorson, Sharon; Fitch, Michael T; Narang, Aneesh T; Evans, Leigh V; Gross, Amy; Rodriguez, Elliot; Dodge, Kelly L; Hamann, Cara J; Robey, Walter C

2008-11-01

Simulation allows educators to develop learner-focused training and outcomes-based assessments. However, the effectiveness and validity of simulation-based training in emergency medicine (EM) requires further investigation. Teaching and testing technical skills require methods and assessment instruments that are somewhat different than those used for cognitive or team skills. Drawing from work published by other medical disciplines as well as educational, behavioral, and human factors research, the authors developed six research themes: measurement of procedural skills; development of performance standards; assessment and validation of training methods, simulator models, and assessment tools; optimization of training methods; transfer of skills learned on simulator models to patients; and prevention of skill decay over time. The article reviews relevant and established educational research methodologies and identifies gaps in our knowledge of how physicians learn procedures. The authors present questions requiring further research that, once answered, will advance understanding of simulation-based procedural training and assessment in EM.

The Impact of Training on Women's Micro-Enterprise Development. Education Research Paper. Knowledge & Research.

ERIC Educational Resources Information Center

Leach, Fiona; Abdulla, Salwa; Appleton, Helen; el-Bushra, Judy; Cardenas, Nora; Kebede, Kibre; Lewis, Viv; Sitaram, Shashikala

A study investigated the impact of training on women's micro-enterprise development in four programs in Ethiopia, India, Peru, and Sudan. Research design was a series of case studies of projects and programs providing training in technical or business skills. Impact of training was measured against these four indicators: income, access to and…

Decisions on Implementing Service-Learning: Perceptions of Physical Therapist Assistant Faculty within a State Technical College System

ERIC Educational Resources Information Center

Herlitzke, Mary Ann

2012-01-01

The Commission on Accreditation of Physical Therapy Education (CAPTE) requires that graduates of physical therapist assistant programs demonstrate a commitment to social responsibility. Service-learning, a method of instruction in which students apply knowledge and skills learned in the classroom to a community need, can assist in the development…

An Alignment Analysis of Washington State's College Readiness Mathematics Standards with Various Local Placement Tests

ERIC Educational Resources Information Center

Achieve, Inc., 2006

2006-01-01

For the past two years, Achieve, Inc. has worked with the Transition Mathematics Project (TMP), a collaborative project of K-12 schools, community and technical colleges, and baccalaureate institutions within the state of Washington, as it developed mathematics standards that "define the core knowledge and skills expected of students entering…

The Promise of Law-Related Education as Delinquency Prevention. Technical Assistance Bulletin.

ERIC Educational Resources Information Center

Parrini, Michelle, Ed.

According to the Law Related Education Act of 1978, Law-Related Education (LRE) can be defined as "education to equip nonlawyers with knowledge and skills pertaining to the law, the legal process, the legal system, and the fundamental principles and values on which these are based." LRE teaches essential concepts of democracy, including…

AUTOMOTIVE DIESEL MAINTENANCE 1. UNIT I, GENERAL INTRODUCTION TO DIESEL ENGINES.

ERIC Educational Resources Information Center

Human Engineering Inst., Cleveland, OH.

ONE OF A 30-MODULE COURSE DESIGNED TO UPGRADE THE JOB SKILLS AND TECHNICAL KNOWLEDGE OF DIESEL MAINTENANCE MECHANICS, THIS MATERIAL WAS DEVELOPED BY INDUSTRIAL TRAINING AND SUBJECT-MATTER SPECIALISTS AND TESTED IN INDUSTRIAL TRAINING SITUATIONS. THE PURPOSE OF THIS FIRST UNIT IS TO PROVIDE AN INTRODUCTION TO DIESEL ENGINES BY DEVELOPING AN…

Development of an Effective School-Based Financial Management Profile in Malaysia: The Delphi Method Application

ERIC Educational Resources Information Center

Radzi, Norfariza Mohd; Ghani, Muhammad Faizal A.; Siraj, Saedah

2015-01-01

The agenda for national development requires a persistent improvement in education as a tool for creating knowledgeable human capital, highly skilled labour, a high technology society and ultimately a highly civilized nation for the future challenging world. It requires considerable financial and technical investment as well as effective and…

Learning as Becoming in Vocational Education and Training: Class, Gender and the Role of Vocational Habitus

ERIC Educational Resources Information Center

Colley, Helen; James, David; Tedder, Michael; Diment, Kim

2003-01-01

Official accounts of learning in vocational education and training emphasise the acquisition of technical skills and knowledge to foster behavioural competence in the workplace. However, such accounts fail to acknowledge the relationship between learning and identity. Drawing on detailed case studies of three vocational courses--in childcare,…

Educational Needs and Employment Trends of Environmental Hazardous Materials Technicians and Related Workers.

ERIC Educational Resources Information Center

Hudis, Paula M.; And Others

A study was conducted to assess trends in the supply and demand for environmental hazardous materials (EHM) technical and related workers and to identify the skills and knowledge required of personnel in these positions. Information for the study was gathered through interviews, focus groups, and data from a mailed survey of employers of EHM…

State Secondary CTE Standards: Developing a Framework out of a Patchwork of Policies

ERIC Educational Resources Information Center

Castellano, Marisa; Harrison, Linda; Schneider, Sherrie

2007-01-01

Many state educational administrators are currently working to define secondary career and technical education (CTE) content standards that specify the knowledge and skills students are expected to master in CTE program areas. The two-phase project on which this report is based explored (a) the progress and status of states in developing statewide…

Automotive Electrical and Electronic Systems I; Automotive Mechanics 2: 9045.03.

ERIC Educational Resources Information Center

Dade County Public Schools, Miami, FL.

The automotive electrical and electronic system I course is designed as one of a group of quinmester courses offered in the field of automotive mechanics. General information will be given along with technical knowledge, basic skills, attitudes and values that are required for job entry level. The nine week (135 clock hour) course overcomes some…

Investigating the Differences between Girls and Boys Regarding the Factors of Frustration, Boredom and Insecurity They Experience during Science Lessons

ERIC Educational Resources Information Center

Wegner, Claas; Strehlke, Friederike; Weber, Phillip

2014-01-01

Science, technology, engineering and mathematics (STEM) are subjects comprising knowledge whose schooling is essential for every country striving after long-term economic success. Despite the already existing shortage of skilled labour within the mathematic-technical-scientific professional field, men still dominate the respective subjects and…

Training New Instructors to Implement Discrete Trial Teaching Strategies with Children with Autism in a Community-Based Intervention Program

ERIC Educational Resources Information Center

Downs, Andrew; Downs, Robyn Conley

2013-01-01

The effects of training and supervision on instructor knowledge and performance of discrete trial teaching (DTT) within three domains (DTT Technical Skills; Work Session Preparation/Conclusion; and Student Engagement/Management) were examined in this study. Eight undergraduate student instructors received an 8-[hour] training in DTT and support…

Professional Capabilities for Twenty-First Century Creative Careers: Lessons from Outstandingly Successful Australian Artists and Designers

ERIC Educational Resources Information Center

Bridgstock, Ruth

2013-01-01

Artists and designers are positioned at the centre of the twenty-first century creative economy. In order to recognise and make the most of the opportunities afforded by this new era, artists and designers still require the creativity, disciplinary depth of knowledge and technical skills traditionally possessed by professionals in these…

Sex Differences in Spatial Abilities of Medical Graduates Entering Residency Programs

ERIC Educational Resources Information Center

Langlois, Jean; Wells, Georges A.; Lecourtois, Marc; Bergeron, Germain; Yetisir, Elizabeth; Martin, Marcel

2013-01-01

Sex differences favoring males in spatial abilities have been known by cognitive psychologists for more than half a century. Spatial abilities have been related to three-dimensional anatomy knowledge and the performance in technical skills. The issue of sex differences in spatial abilities has not been addressed formally in the medical field. The…

Can We Expect to Recruit Future Engineers among Students Who Have Never Repaired a Toy?

ERIC Educational Resources Information Center

Virtic, Mateja Ploj; Šorgo, Andrej

2016-01-01

Education has traditionally focused primarily on content and cognitive goals. While content knowledge is important, to enter to the labour market today, graduates must also develop manual skills and technical literacy. The paper deals with engineering and technology education in Slovenia. It portrays the problem of the decline in interest in…

Highway Surveying. Instructor's Guide for an Adult Course. Highway Technicians Program Unit III.

ERIC Educational Resources Information Center

Fimmano, Ralph; Kacharian, John C.

The revised instructor's guide, which is part of the New York State Highway Technician's Program to provide needed technicians and engineers by upgrading people in the lower-level technician jobs, is geared toward the improvement of technical skills and knowledge in highway surveying. In view of the shortage of qualified technicians and engineers…

A Rubric for Assessing a Student's Ability to Use the Light Microscope

ERIC Educational Resources Information Center

Fitch, Greg K.

2007-01-01

All teachers do assessments. Biology teachers, by grading exams, quizzes, papers, and lab reports, assess mostly "knowledge." An important part of being a modern biologist, however, is the ability to perform certain technical or manual skills (known in the trade as "techniques") such as running gels, pipetting, recording from excitable cells with…

Student and Staff Perceptions of Key Aspects of Computer Science Engineering Capstone Projects

ERIC Educational Resources Information Center

Olarte, Juan José; Dominguez, César; Jaime, Arturo; Garcia-Izquierdo, Francisco José

2016-01-01

In carrying out their capstone projects, students use knowledge and skills acquired throughout their degree program to create a product or provide a technical service. An assigned advisor guides the students and supervises the work, and a committee assesses the projects. This study compares student and staff perceptions of key aspects of…

NASA/DOD Aerospace Knowledge Diffusion Research Project. Paper 43: The role of information resource training in aerospace education. Expanded version

NASA Technical Reports Server (NTRS)

Lawrence, Barbara; Pinelli, Thomas E.; Barclay, Rebecca O.; Kennedy, John M.; Holloway, Karen

1994-01-01

Information resource instruction for undergraduate aerospace engineering students has traditionally been limited to an occasional part of the education process--a written paper required in the capstone design course or a library tour. Efforts to encourage the use of aerospace literature and information resources have been made in the past decade, with a recent push from information and, especially, networking technology. This paper presents data from a survey of U.S. aerospace engineering students regarding their instruction in the use of information resources. We find that more than 25 percent of the students surveyed had no instruction in technical communications skills or the use of information resources. We consider the need for instruction in the use of information resources and technical communications skills and the opportunities presented for improvement.

A mixed methods investigation into the use of non-technical skills by community and hospital pharmacists.

PubMed

Irwin, A; Weidmann, A E

2015-01-01

Non-technical skills refer to the social and cognitive factors that may influence efficient and safe job performance. Non-technical skills are an important element of patient safety in a variety of health care disciplines, including surgery, anesthesia and nursing. However, the use of non-technical skills in pharmacy practice has not yet been fully assessed. To examine attitudes toward, and use of, non-technical skills by pharmacy personnel. A mixed methods approach was used: An attitude survey explored pharmacy personnel attitudes towards non-technical skills and inter-professional collaboration, with community and hospital pharmacy staff (n = 62). Qualitative interviews were then conducted using the critical incident technique, with community pharmacists (n = 11). The survey results demonstrated differences in the opinions of community and hospital pharmacists on three non-technical skill constructs: team structure, mutual support, and situation monitoring, with community pharmacists reporting significantly more positive attitudes about all three constructs. Both groups reported low levels of collaboration with primary care physicians. The interviews identified five non-technical skills as key elements of successful pharmacist performance from the interview transcripts: teamwork; leadership; task management; situation awareness; decision-making. The survey and interviews identified the non-technical skills that are important to pharmacists. This represents the first step towards the development of a behavioral rating system for training purposes that could potentially improve the non-technical skills of pharmacists and enhance patient safety. Copyright © 2015 Elsevier Inc. All rights reserved.

Diabetic foot workshop: Improving technical and educational skills for nurses.

PubMed

Aalaa, Maryam; Sanjari, Mahnaz; Shahbazi, Samimeh; Shayeganmehr, Zahra; Abooeirad, Maryam; Amini, Mohammad Reza; Adibi, Hossien; Mehrdad, Neda

2017-01-01

Diabetes mellitus as one of the most common metabolic disorders has some complications, one of the main ones is diabetic foot (DF). Appropriate care and education prevents 85% of diabetic foot amputations. An ideal management to prevent and treat diabetic foot necessitates a close collaboration between the health team members and the diabetic patient. Therefore, improving nurses' knowledge about DF care and advancement in the quality of care provided by the nurses could significantly improve diabetic foot prevention and management. Therefore, the aim of DF workshop was to improve technical and educational skills of the nurses to prevent and manage diabetic foot. Considering the vital role of the nurses in providing DF care, EMRI decided to conduct Diabetic foot workshop for them. The following five steps were designed for the 14 coordinating sessions in the workshop: Goals definition, deciding about attendees, location selection, creating agenda, and developing a follow-up plan. "Diabetic Foot Workshop for Nurses" provides appropriate training to DF nurses at the national level; and combining theory and practice in this workshop not only increases nurses' knowledge, but also improves their skills in the field of the diabetic foot. Providing education and care to patients by DF nurse specialists instead of general nurses could be an important output of this workshop, which may lead to DF prevention and amputation decrease in the long term.

A Geoscience Workforce Model for Non-Geoscience and Non-Traditional STEM Students

NASA Astrophysics Data System (ADS)

Liou-Mark, J.; Blake, R.; Norouzi, H.; Vladutescu, D. V.; Yuen-Lau, L.

2016-12-01

The Summit on the Future of Geoscience Undergraduate Education has recently identified key professional skills, competencies, and conceptual understanding necessary in the development of undergraduate geoscience students (American Geosciences Institute, 2015). Through a comprehensive study involving a diverse range of the geoscience academic and employer community, the following professional scientist skills were rated highly important: 1) critical thinking/problem solving skills; 2) effective communication; 3) ability to access and integrate information; 4) strong quantitative skills; and 5) ability to work in interdisciplinary/cross cultural teams. Based on the findings of the study above, the New York City College of Technology (City Tech) has created a one-year intensive training program that focusses on the development of technical and non-technical geoscience skills for non-geoscience, non-traditional STEM students. Although City Tech does not offer geoscience degrees, the primary goal of the program is to create an unconventional pathway for under-represented minority STEM students to enter, participate, and compete in the geoscience workforce. The selected cohort of STEM students engage in year-round activities that include a geoscience course, enrichment training workshops, networking sessions, leadership development, research experiences, and summer internships at federal, local, and private geoscience facilities. These carefully designed programmatic elements provide both the geoscience knowledge and the non-technical professional skills that are essential for the geoscience workforce. Moreover, by executing this alternate, robust geoscience workforce model that attracts and prepares underrepresented minorities for geoscience careers, this unique pathway opens another corridor that helps to ameliorate the dire plight of the geoscience workforce shortage. This project is supported by NSF IUSE GEOPATH Grant # 1540721.

Relationship between non-technical skills and technical performance during cardiopulmonary resuscitation: does stress have an influence?

PubMed

Krage, Ralf; Zwaan, Laura; Tjon Soei Len, Lian; Kolenbrander, Mark W; van Groeningen, Dick; Loer, Stephan A; Wagner, Cordula; Schober, Patrick

2017-11-01

Non-technical skills, such as task management, leadership, situational awareness, communication and decision-making refer to cognitive, behavioural and social skills that contribute to safe and efficient team performance. The importance of these skills during cardiopulmonary resuscitation (CPR) is increasingly emphasised. Nonetheless, the relationship between non-technical skills and technical performance is poorly understood. We hypothesise that non-technical skills become increasingly important under stressful conditions when individuals are distracted from their tasks, and investigated the relationship between non-technical and technical skills under control conditions and when external stressors are present. In this simulator-based randomised cross-over study, 30 anaesthesiologists and anaesthesia residents from the VU University Medical Center, Amsterdam, the Netherlands, participated in two different CPR scenarios in random order. In one scenario, external stressors (radio noise and a distractive scripted family member) were added, while the other scenario without stressors served as control condition. Non-technical performance of the team leader and technical performance of the team were measured using the 'Anaesthetists' Non-technical Skill' score and a recently developed technical skills score. Analysis of variance and Pearson correlation coefficients were used for statistical analyses. Non-technical performance declined when external stressors were present (adjusted mean difference 3.9 points, 95% CI 2.4 to 5.5 points). A significant correlation between non-technical and technical performance scores was observed when external stressors were present (r=0.67, 95% CI 0.40 to 0.83, p<0.001), while no evidence for such a relationship was observed under control conditions (r=0.15, 95% CI -0.22 to 0.49, p=0.42). This was equally true for all individual domains of the non-technical performance score (task management, team working, situation awareness, decision-making). During CPR with external stressors, the team's technical performance is related to the non-technical skills of the team leader. This may have important implications for training of CPR teams. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2017. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

Current concepts in simulation-based trauma education.

PubMed

Cherry, Robert A; Ali, Jameel

2008-11-01

The use of simulation-based technology in trauma education has focused on providing a safe and effective alternative to the more traditional methods that are used to teach technical skills and critical concepts in trauma resuscitation. Trauma team training using simulation-based technology is also being used to develop skills in leadership, team-information sharing, communication, and decision-making. The integration of simulators into medical student curriculum, residency training, and continuing medical education has been strongly recommended by the American College of Surgeons as an innovative means of enhancing patient safety, reducing medical errors, and performing a systematic evaluation of various competencies. Advanced human patient simulators are increasingly being used in trauma as an evaluation tool to assess clinical performance and to teach and reinforce essential knowledge, skills, and abilities. A number of specialty simulators in trauma and critical care have also been designed to meet these educational objectives. Ongoing educational research is still needed to validate long-term retention of knowledge and skills, provide reliable methods to evaluate teaching effectiveness and performance, and to demonstrate improvement in patient safety and overall quality of care.

Computer Simulation and Digital Resources for Plastic Surgery Psychomotor Education.

PubMed

Diaz-Siso, J Rodrigo; Plana, Natalie M; Stranix, John T; Cutting, Court B; McCarthy, Joseph G; Flores, Roberto L

2016-10-01

Contemporary plastic surgery residents are increasingly challenged to learn a greater number of complex surgical techniques within a limited period. Surgical simulation and digital education resources have the potential to address some limitations of the traditional training model, and have been shown to accelerate knowledge and skills acquisition. Although animal, cadaver, and bench models are widely used for skills and procedure-specific training, digital simulation has not been fully embraced within plastic surgery. Digital educational resources may play a future role in a multistage strategy for skills and procedures training. The authors present two virtual surgical simulators addressing procedural cognition for cleft repair and craniofacial surgery. Furthermore, the authors describe how partnerships among surgical educators, industry, and philanthropy can be a successful strategy for the development and maintenance of digital simulators and educational resources relevant to plastic surgery training. It is our responsibility as surgical educators not only to create these resources, but to demonstrate their utility for enhanced trainee knowledge and technical skills development. Currently available digital resources should be evaluated in partnership with plastic surgery educational societies to guide trainees and practitioners toward effective digital content.

Simple, but not easy - Opportunities and challenges from teachers' and students' perspectives in the 21st century of veterinary parasitology teaching.

PubMed

Strube, Christina; Raue, Katharina; Janecek, Elisabeth

2018-03-15

One of the main goals in academia is, and has been, high quality education of students to provide theoretical and practical knowledge essential for professional life. Achieving this goal is highly dependent on teaching procedures and, consequently, on a constant adaptation of teaching styles to align to technical advances and cutting-edge topics. Technical advances can strongly influence teaching and learning in the complex subject area of veterinary parasitology. Today's students are provided with extensive, digital lecture notes, and e-learning offers including virtual microscope technology to independently obtain intensified theoretical knowledge and understanding. As veterinary parasitology is also highly reliant on proficient practical skills, lectures with integrated diagnostic exercises are mandatory. Nowadays, such practical skills, such as carrying out faecal examination procedures, can be strengthened by having access to clinical skills labs. Advances such as digital lecture notes, e-learning and virtual microscopes do not only provide new, innovative opportunities, but can also comprise challenges. In this context, provision of sufficient relevant studying material may discourage students to take on responsibilities for autonomous gathering of information. Besides technical advances, 'Zeitgeist' changes are shaping teaching contents, which are progressively expanding as zoonoses are increasingly being focused on. With the aim of adopting the one-health concept, students today are expected not only to bear responsibilities for animals, but also for their owners and public health. This article will cast light on some key challenges and opportunities in modern veterinary parasitology teaching from the teachers´ and the students´ perspectives. Copyright © 2018 Elsevier B.V. All rights reserved.

Integration of Hands-On Team Training into Existing Curriculum Improves Both Technical and Nontechnical Skills in Laparoscopic Cholecystectomy.

PubMed

Caskey, Robert C; Owei, Lily; Rao, Raghavendra; Riddle, Elijah W; Brooks, Ari D; Dempsey, Daniel T; Morris, Jon B; Neylan, Christopher J; Williams, Noel N; Dumon, Kristoffel R

Nontechnical skills are an essential component of surgical education and a major competency assessed by the ACGME milestones project. However, the optimal way to integrate nontechnical skills training into existing curricula and then objectively evaluate the outcome is still unknown. The aim of this study was to determine the effect laparoscopic team-based task training would have on the nontechnical skills needed for laparoscopic surgery. 9 PGY-1 residents underwent an established training curriculum for teaching the knowledge and technical skills involved in laparoscopic cholecystectomy. Initial training involved a didactic session, expert-led practice on a porcine model in a simulated operating room and laparoscopic skills practice on a virtual reality trainer. Residents then performed a laparoscopic cholecystectomy on the same porcine model as a preintervention test. Three to four months following this, residents were subjected to specific nontechnical skills training involving 2 simple team-based laparoscopic tasks. They then practiced a further 4 to 6 hours on the virtual reality trainer. A repeat postintervention laparoscopic cholecystectomy was then performed 3 to 4 months after nontechnical skills training. Both the preintervention and postintervention laparoscopic cholecystectomies were audiovisually recorded and then evaluated by 2 independent surgeons in a blinded fashion. Technical skills were assessed using objective structured assessment of technical skills (OSATS) and a technique specific rating scale (TRS) that we developed for laparoscopic cholecystectomy. Nontechnical skills were assessed using nontechnical skills for surgeons (NOTSS). Residents also completed a survey at the beginning and end of the training. Tertiary care, university based teaching institution. A total of 9 general surgery residents at the intern level. The mean OSATS score improved from 13.7 ± 1.24 to 26.7 ± 0.31 (p < 0.001), the mean TRS score improved from 6 ± 0.46 to 13.1 ± 0.36 (p < 0.001) and the mean NOTSS score improved from 21.7 ± 1.83 to 36.3 ± 0.87 (p < 0.001) following the training. There was a strong correlation between OSATS and NOTSS scores (Pearson's R = 0.98) and TRS and NOTSS (R = 0.94). The inter-rater agreement was 0.79 for NOTSS, 0.9 for OSATS, and 0.82 for TRS. Following completion of the training, residents self-reported improvements in exchanging information (p < 0.01), coordinating activities (p < 0.01) and coping with pressure in the operating room (p < 0.001). Simple, team-based nontechnical skills training for laparoscopic cholecystectomy that was separate from technical skills training led to a sustained increase in residents' nontechnical skills 3 to 4 months after training. This was associated with a self-reported improvement in many nontechnical skills based on resident survey. Based on these results, we recommend that such designated nontechnical skills training is a valid alternative to other methods such as coaching and debriefing. We, therefore, plan to continue our efforts to develop team-based simulation tasks aimed at improving nontechnical skills for multiple surgical modalities. Copyright © 2017 Association of Program Directors in Surgery. Published by Elsevier Inc. All rights reserved.

NASA/DOD Aerospace Knowledge Diffusion Research Project. Paper 50: From student to entry-level professional: Examining the role of language and written communications in the reacculturation of aerospace engineering students

NASA Technical Reports Server (NTRS)

Pinelli, Thomas E.; Barclay, Rebecca O.; Keene, Michael L.; Kennedy, John M.; Hecht, Laura F.

1995-01-01

When students graduate and enter the world of work, they must make the transition from an academic to a professional knowledge community. Kenneth Bruffee's model of the social construction of knowledge suggests that language and written communication play a critical role in the reacculturation process that enables successful movement from one knowledge community to another. We present the results of a national (mail) survey that examined the technical communications abilities, skills, and competencies of 1,673 aerospace engineering students, who represent an academic knowledge community. These results are examined within the context of the technical communications behaviors and practices reported by 2,355 aerospace engineers and scientists employed in government and industry, who represent a professional knowledge community that the students expect to join. Bruffee's claim of the importance of language and written communication in the successful transition from an academic to a professional knowledge community is supported by the responses from the two communities we surveyed. Implications are offered for facilitating the reacculturation process of students to entry-level engineering professionals.

Knowledge-based graphical interfaces for presenting technical information

NASA Technical Reports Server (NTRS)

Feiner, Steven

1988-01-01

Designing effective presentations of technical information is extremely difficult and time-consuming. Moreover, the combination of increasing task complexity and declining job skills makes the need for high-quality technical presentations especially urgent. We believe that this need can ultimately be met through the development of knowledge-based graphical interfaces that can design and present technical information. Since much material is most naturally communicated through pictures, our work has stressed the importance of well-designed graphics, concentrating on generating pictures and laying out displays containing them. We describe APEX, a testbed picture generation system that creates sequences of pictures that depict the performance of simple actions in a world of 3D objects. Our system supports rules for determining automatically the objects to be shown in a picture, the style and level of detail with which they should be rendered, the method by which the action itself should be indicated, and the picture's camera specification. We then describe work on GRIDS, an experimental display layout system that addresses some of the problems in designing displays containing these pictures, determining the position and size of the material to be presented.

Knowledge Acquisition and Job Training for Advanced Technical Skills Using Immersive Virtual Environment

NASA Astrophysics Data System (ADS)

Watanuki, Keiichi; Kojima, Kazuyuki

The environment in which Japanese industry has achieved great respect is changing tremendously due to the globalization of world economies, while Asian countries are undergoing economic and technical development as well as benefiting from the advances in information technology. For example, in the design of custom-made casting products, a designer who lacks knowledge of casting may not be able to produce a good design. In order to obtain a good design and manufacturing result, it is necessary to equip the designer and manufacturer with a support system related to casting design, or a so-called knowledge transfer and creation system. This paper proposes a new virtual reality based knowledge acquisition and job training system for casting design, which is composed of the explicit and tacit knowledge transfer systems using synchronized multimedia and the knowledge internalization system using portable virtual environment. In our proposed system, the education content is displayed in the immersive virtual environment, whereby a trainee may experience work in the virtual site operation. Provided that the trainee has gained explicit and tacit knowledge of casting through the multimedia-based knowledge transfer system, the immersive virtual environment catalyzes the internalization of knowledge and also enables the trainee to gain tacit knowledge before undergoing on-the-job training at a real-time operation site.

[Change management: An analysis of actors; perceptions about technical assistance in the Democratic Republic of Congo].

PubMed

Ribesse, Nathalie; Iyeti, Alain; Macq, Jean

2015-01-01

Technical assistance (TA) is a common component of health system strengthening interventions. This type of intervention is too often designed and evaluated according to a logic that fails to take into account social complexity. Actors' perceptions are one element of this complexity. This article presents a study conducted in the Democratic Republic of Congo designed to identify perceptions concerning two types of technical support providers for health system strengthening: long-term technical assistants (agents of development agencies) and provincial technical advisors (agents of the Ministry of Health). Interviews were conducted with an innovative tool inspired by the principles of systems thinking. Interviewees were actors involved in a TA intervention in the province of Bandundu. Their expectations regarding TA providers were identified in terms of personal characteristics (knowledge, know-how and interpersonal skills), roles, and styles of interaction for capacity building ("interventionist/ prescriptive axes"). Interviewees emphasized the importance of mutual learning and the quality of interactions, which depends on TA provider's interpersonal skills and mutual willingness. Perceptions of TA provider's characteristics tend to be similar, but several differences were observed concerning the expectations about the roles of TAs, and the style that should be adopted for capacity building. Ignoring these differences in expectations may be a threat to the effectiveness of TA.

Information revolution in nursing and health care: educating for tomorrow's challenge.

PubMed

Kooker, B M; Richardson, S S

1994-06-01

Current emphasis on the national electronic highway and a national health database for comparative health care reporting demonstrates society's increasing reliance on information technology. The efficient electronic processing and managing of data, information, and knowledge are critical for survival in tomorrow's health care organization. To take a leadership role in this information revolution, informatics nurse specialists must possess competencies that incorporate information science, computer science, and nursing science for successful information system development. In selecting an appropriate informatics educational program or to hire an individual capable of meeting this challenge, nurse administrators must look for the following technical knowledge and skill set: information management principles, system development life cycle, programming languages, file design and access, hardware and network architecture, project management skills, and leadership abilities.

Technical skills requirement of Indonesian construction labors to work in Malaysia

NASA Astrophysics Data System (ADS)

Adi, Henny Pratiwi

2017-03-01

Labors skills is an important part of construction projects implementation. Suitability between the skills possessed by labors with the skills needed by user is required to increase employment opportunities. Malaysia is a country that using construction labors from Indonesia. This study aims to get the kind of technical skills required by users of Indonesian constructian labors in Malaysia and also the importance level of technical skills. Data collecting in this research was conducted through interviews and questionnaires on contractors in Malaysia. The next stage was determine the importance level of technical skills in work field of carpenter, bricklayer, plumber and painters. The importance level of technical skills analyzed using the Relative Importance Index (RII). The results showed that mastering the operation of both instruments either manually or electrically is the most importance in the technical skills. Therefore, an understanding of the types of equipment for work field and the manner of operation is need to had by Indonesian construction labors who will work in Malaysia.

3D-printed tracheoesophageal puncture and prosthesis placement simulator.

PubMed

Barber, Samuel R; Kozin, Elliott D; Naunheim, Matthew R; Sethi, Rosh; Remenschneider, Aaron K; Deschler, Daniel G

A tracheoesophageal prosthesis (TEP) allows for speech after total laryngectomy. However, TEP placement is technically challenging, requiring a coordinated series of steps. Surgical simulators improve technical skills and reduce operative time. We hypothesize that a reusable 3-dimensional (3D)-printed TEP simulator will facilitate comprehension and rehearsal prior to actual procedures. The simulator was designed using Fusion360 (Autodesk, San Rafael, CA). Components were 3D-printed in-house using an Ultimaker 2+ (Ultimaker, Netherlands). Squid simulated the common tracheoesophageal wall. A Blom-Singer TEP (InHealth Technologies, Carpinteria, CA) replicated placement. Subjects watched an instructional video and completed pre- and post-simulation surveys. The simulator comprised 3D-printed parts: the esophageal lumen and superficial stoma. Squid was placed between components. Ten trainees participated. Significant differences existed between junior and senior residents with surveys regarding anatomy knowledge(p<0.05), technical details(p<0.01), and equipment setup(p<0.01). Subjects agreed that simulation felt accurate, and rehearsal raised confidence in future procedures. A 3D-printed TEP simulator is feasible for surgical training. Simulation involving multiple steps may accelerate technical skills and improve education. Copyright © 2017 Elsevier Inc. All rights reserved.

Innovative methods of popularizing technical education

NASA Astrophysics Data System (ADS)

Shkitsa, L. Y.; Panchuk, V. G.; Kornuta, V. A.

2017-05-01

There have been analyzed reasons of the loss of technical education’s popularity. Also, the analysis of known educational and production methods, oriented at the innovative model of development of society, was performed. It is stated that the acquisition of 21st century’s skills as a result of competition of technical education are natural for the DIY ideology, which was realized in the institutions like Fab Lab. The new educational strategy, based on project-based learning, is proposed to be implemented as a special laboratory with equipment, which would be a center of innovative development for students at the Technical University. Moreover, the list of projects planned for implementation, that includes not only projects, specific to a particular university, but also projects, demanded by society as a whole, is specified. It is worth to implement trendy projects in the laboratory, such as toy-like, ecological projects; projects of the energy dependence decrease or the energy efficiency increase, modern digital or innovative projects etc. The student should gain knowledge, skills and, possibly, equipment that are available for immediate usage on the labor market or for the realization of his own projects or the community’s projects in everyday life after the realization of the particular project at the laboratory

Developing Research-Ready Skills: Preparing Early Academic Students for Participation in Research Experiences

NASA Astrophysics Data System (ADS)

Charlevoix, D. J.; Morris, A. R.

2015-12-01

Engaging lower-division undergraduates in research experiences is a key but challenging aspect of guiding talented students into the geoscience research pipeline. UNAVCO conducted a summer internship program to prepare first and second year college students for participation in authentic, scientific research. Many students in their first two years of academic studies do not have the science content knowledge or sufficient math skills to conduct independent research. Students from groups historically underrepresented in the geosciences may face additional challenges in that they often have a less robust support structure to help them navigate the university environment and may be less aware of professional opportunities in the geosciences.UNAVCO, manager of NSF's geodetic facility, hosted four students during summer 2015 internship experience aimed to help them develop skills that will prepare them for research internships and skills that will help them advance professionally. Students spent eight weeks working with UNAVCO technical staff learning how to use equipment, prepare instrumentation for field campaigns, among other technical skills. Interns also participated in a suite of professional development activities including communications workshops, skills seminars, career circles, geology-focused field trips, and informal interactions with research interns and graduate student interns at UNAVCO. This presentation will outline the successes and challenges of engaging students early in their academic careers and outline the unique role such experiences can have in students' academic careers.

Technical writing versus technical writing

NASA Technical Reports Server (NTRS)

Dillingham, J. W.

1981-01-01

Two terms, two job categories, 'technical writer' and 'technical author' are discussed in terms of industrial and business requirements and standards. A distinction between 'technical writing' and technical 'writing' is made. The term 'technical editor' is also considered. Problems inherent in the design of programs to prepare and train students for these jobs are discussed. A closer alliance between industry and academia is suggested as a means of preparing students with competent technical communication skills (especially writing and editing skills) and good technical skills.

Providing specialist clinical skills in soft tissue and intra-articular injection through a postgraduate masters module.

PubMed

Stevenson, Kay; Waterfield, Jackie

2005-01-01

Current philosophy and policy changes in the National Health Service are encouraging healthcare practitioners to extend their clinical skills to create a more patient-centred approach thus allowing patients to be seen in a timely and more appropriate manner. This often requires further development of the practitioners' skills and knowledge. One approach to achieve this is through collaboration between employers and educational providers to ensure that educational experience is not only evidence based but also responsive to the needs of the current and future workforce. A postgraduate module was developed to raise critical and evaluative skills, as well as the technical skills of practitioners using injections in the management of joint and soft tissue pathology, while developing a professional responsibility towards injection practice. The module emphasized learning though experience by contextualizing the theoretical aspects of the module and by its student centred assessments. Further strengths of this module are that it has utilized academic and clinical expertise and knowledge to enable clinicians to gain additional skills and the multidisciplinary approach engendered good working practice Overall the module was evaluated positively by both tutors and students and not only met its aims but also addressed the current professional and policy issues around continuing professional development. Copyright (c) 2005 John Wiley & Sons, Ltd.

Coaching Non-technical Skills Improves Surgical Residents' Performance in a Simulated Operating Room.

PubMed

Yule, Steven; Parker, Sarah Henrickson; Wilkinson, Jill; McKinley, Aileen; MacDonald, Jamie; Neill, Adrian; McAdam, Tim

2015-01-01

To investigate the effect of coaching on non-technical skills and performance during laparoscopic cholecystectomy in a simulated operating room (OR). Non-technical skills (situation awareness, decision making, teamwork, and leadership) underpin technical ability and are critical to the success of operations and the safety of patients in the OR. The rate of developing assessment tools in this area has outpaced development of workable interventions to improve non-technical skills in surgical training and beyond. A randomized trial was conducted with senior surgical residents (n = 16). Participants were randomized to receive either non-technical skills coaching (intervention) or to self-reflect (control) after each of 5 simulated operations. Coaching was based on the Non-Technical Skills For Surgeons (NOTSS) behavior observation system. Surgeon-coaches trained in this method coached participants in the intervention group for 10 minutes after each simulation. Primary outcome measure was non-technical skills, assessed from video by a surgeon using the NOTSS system. Secondary outcomes were time to call for help during bleeding, operative time, and path length of laparoscopic instruments. Non-technical skills improved in the intervention group from scenario 1 to scenario 5 compared with those in the control group (p = 0.04). The intervention group was faster to call for help when faced with unstoppable bleeding in the final scenario (no. 5; p = 0.03). Coaching improved residents' non-technical skills in the simulated OR compared with those in the control group. Important next steps are to implement non-technical skills coaching in the real OR and assess effect on clinically important process measures and patient outcomes. Copyright © 2015 Association of Program Directors in Surgery. Published by Elsevier Inc. All rights reserved.

76 FR 62455 - Announcement of Updated Funding Availability for H-1B Technical Skills Training Grants

Federal Register 2010, 2011, 2012, 2013, 2014

2011-10-07

... 10-13] Announcement of Updated Funding Availability for H-1B Technical Skills Training Grants AGENCY... the availability of $240 million for the H-1B Technical Skills Training Grants to be awarded through a... additional applicants to apply for the H-1B Technical Skills Training Grants competition that will close on...

Unintended benefits: leadership skills and behavioral change among Guatemalan fieldworkers employed in a longitudinal household air pollution study.

PubMed

Kuo, Devina; Thompson, Lisa M; Lee, Amy; Romero, Carolina; Smith, Kirk R

2010-01-01

The RESPIRE and CRECER studies measured the effects of reduced household air pollution (HAP) from wood-fired cookstoves on respiratory health in rural highland Guatemala. This article examines behavior change and leadership skill development in local community members who were hired as fieldworkers to assist with research. Fieldworkers administered household questionnaires, shared functions similar to community health workers, and bridged health resources to communities. A mixed-methods design for data collection (in-depth interviews, focus groups, impact drawings, knowledge questionnaire, and retrospective pre-test) was used. Purposive sampling included 10 fieldworkers and 13 local service providers. Fieldworkers showed an increase in knowledge, positive attitudes, and practices around HAP. They developed new technical, interpersonal, and leadership skills. Fieldworkers played a crucial role in building confianza (trust) with the community, bridging resources, and improving outside researchers' relationships with locals. Recommendations for future researchers include inclusion of additional training courses and adoption of community participatory approaches.

UNINTENDED BENEFITS: LEADERSHIP SKILLS AND BEHAVIORAL CHANGE AMONG GUATEMALAN FIELDWORKERS EMPLOYED IN A LONGITUDINAL HOUSEHOLD AIR POLLUTION STUDY*

PubMed Central

KUO, DEVINA; THOMPSON, LISA M.; LEE, AMY; ROMERO, CAROLINA; SMITH, KIRK R.

2015-01-01

The RESPIRE and CRECER studies measured the effects of reduced household air pollution (HAP) from wood-fired cookstoves on respiratory health in rural highland Guatemala. This article examines behavior change and leadership skill development in local community members who were hired as fieldworkers to assist with research. Fieldworkers administered household questionnaires, shared functions similar to community health workers, and bridged health resources to communities. A mixed-methods design for data collection (in-depth interviews, focus groups, impact drawings, knowledge questionnaire, and retrospective pre-test) was used. Purposive sampling included 10 fieldworkers and 13 local service providers. Fieldworkers showed an increase in knowledge, positive attitudes, and practices around HAP. They developed new technical, interpersonal, and leadership skills. Fieldworkers played a crucial role in building confianza (trust) with the community, bridging resources, and improving outside researchers’ relationships with locals. Recommendations for future researchers include inclusion of additional training courses and adoption of community participatory approaches. PMID:22192940

Simulation-based ureteroscopy skills training curriculum with integration of technical and non-technical skills: a randomised controlled trial.

PubMed

Brunckhorst, Oliver; Shahid, Shahab; Aydin, Abdullatif; McIlhenny, Craig; Khan, Shahid; Raza, Syed Johar; Sahai, Arun; Brewin, James; Bello, Fernando; Kneebone, Roger; Khan, Muhammad Shamim; Dasgupta, Prokar; Ahmed, Kamran

2015-09-01

Current training modalities within ureteroscopy have been extensively validated and must now be integrated within a comprehensive curriculum. Additionally, non-technical skills often cause surgical error and little research has been conducted to combine this with technical skills teaching. This study therefore aimed to develop and validate a curriculum for semi-rigid ureteroscopy, integrating both technical and non-technical skills teaching within the programme. Delphi methodology was utilised for curriculum development and content validation, with a randomised trial then conducted (n = 32) for curriculum evaluation. The developed curriculum consisted of four modules; initially developing basic technical skills and subsequently integrating non-technical skills teaching. Sixteen participants underwent the simulation-based curriculum and were subsequently assessed, together with the control cohort (n = 16) within a full immersion environment. Both technical (Time to completion, OSATS and a task specific checklist) and non-technical (NOTSS) outcome measures were recorded with parametric and non-parametric analyses used depending on the distribution of our data as evaluated by a Shapiro-Wilk test. Improvements within the intervention cohort demonstrated educational value across all technical and non-technical parameters recorded, including time to completion (p < 0.01), OSATS scores (p < 0.001), task specific checklist scores (p = 0.011) and NOTSS scores (p < 0.001). Content validity, feasibility and acceptability were all demonstrated through curriculum development and post-study questionnaire results. The current developed curriculum demonstrates that integrating both technical and non-technical skills teaching is both educationally valuable and feasible. Additionally, the curriculum offers a validated simulation-based training modality within ureteroscopy and a framework for the development of other simulation-based programmes.

Relationship between non-technical skills and technical performance during cardiopulmonary resuscitation: does stress have an influence?

PubMed Central

Krage, Ralf; Zwaan, Laura; Tjon Soei Len, Lian; Kolenbrander, Mark W; van Groeningen, Dick; Loer, Stephan A; Wagner, Cordula; Schober, Patrick

2017-01-01

Background Non-technical skills, such as task management, leadership, situational awareness, communication and decision-making refer to cognitive, behavioural and social skills that contribute to safe and efficient team performance. The importance of these skills during cardiopulmonary resuscitation (CPR) is increasingly emphasised. Nonetheless, the relationship between non-technical skills and technical performance is poorly understood. We hypothesise that non-technical skills become increasingly important under stressful conditions when individuals are distracted from their tasks, and investigated the relationship between non-technical and technical skills under control conditions and when external stressors are present. Methods In this simulator-based randomised cross-over study, 30 anaesthesiologists and anaesthesia residents from the VU University Medical Center, Amsterdam, the Netherlands, participated in two different CPR scenarios in random order. In one scenario, external stressors (radio noise and a distractive scripted family member) were added, while the other scenario without stressors served as control condition. Non-technical performance of the team leader and technical performance of the team were measured using the ‘Anaesthetists’ Non-technical Skill’ score and a recently developed technical skills score. Analysis of variance and Pearson correlation coefficients were used for statistical analyses. Results Non-technical performance declined when external stressors were present (adjusted mean difference 3.9 points, 95% CI 2.4 to 5.5 points). A significant correlation between non-technical and technical performance scores was observed when external stressors were present (r=0.67, 95% CI 0.40 to 0.83, p<0.001), while no evidence for such a relationship was observed under control conditions (r=0.15, 95% CI −0.22 to 0.49, p=0.42). This was equally true for all individual domains of the non-technical performance score (task management, team working, situation awareness, decision-making). Conclusions During CPR with external stressors, the team’s technical performance is related to the non-technical skills of the team leader. This may have important implications for training of CPR teams. PMID:28844039

New Skills, New Jobs: Return Migration, Skill Transfers, and Business Formation in Mexico.

PubMed

Hagan, Jacqueline Maria; Wassink, Joshua

2016-11-01

Numerous studies have documented a high propensity for self-employment and business formation among return migrants relative to non-migrants. The literature points to the importance of remitted savings, migration duration, and number and types of jobs abroad for business formation upon return. Implicit in this scholarship is the assumption that migrants acquire not only financial capital, but also human capital, which expands their opportunities upon return. Empirical work has demonstrated how the transfer of formal human capital, such as language skills and professional credentials, influences the mobility pathways of professional return migrants. More recent research has also found that the transfer of informal human capital, such as social and technical skills learned on the job, shape the mobility pathways of return migrants with little schooling. Absent from this scholarship, however, are studies that directly test the relationship between the transfer of informal human capital and the odds of business formation among return migrants. In this paper, we address this gap. Using a multidimensional skills variable, which includes social, technical, and English language competences, we measure and test the relationship between skill acquisition and transfer and business formation among return migrants. Drawing on findings from a survey of 200 return migrants and 200 non-migrants in Mexico, we show that return migrants who successfully acquire and transfer new skills across the migratory circuit often leverage their new knowledge to launch businesses. Our findings have wide implications for how social scientists conceptualize and measure human capital formation across the migratory circuit.

Human Factors in Training - Space Flight Resource Management Training

NASA Technical Reports Server (NTRS)

Bryne, Vicky; Connell, Erin; Barshi, Immanuel; Arsintescu, L.

2009-01-01

Accidents and incidents show that high workload-induced stress and poor teamwork skills lead to performance decrements and errors. Research on teamwork shows that effective teams are able to adapt to stressful situations, and to reduce workload by using successful strategies for communication and decision making, and through dynamic redistribution of tasks among team members. Furthermore, superior teams are able to recognize signs and symptoms of workload-induced stress early, and to adapt their coordination and communication strategies to the high workload, or stress conditions. Mission Control Center (MCC) teams often face demanding situations in which they must operate as an effective team to solve problems with crew and vehicle during onorbit operations. To be successful as a team, flight controllers (FCers) must learn effective teamwork strategies. Such strategies are the focus of Space Flight Resource Management (SFRM) training. SFRM training in MOD has been structured to include some classroom presentations of basic concepts and case studies, with the assumption that skill development happens in mission simulation. Integrated mission simulations do provide excellent opportunities for FCers to practice teamwork, but also require extensive technical knowledge of vehicle systems, mission operations, and crew actions. Such technical knowledge requires lengthy training. When SFRM training is relegated to integrated simulations, FCers can only practice SFRM after they have already mastered the technical knowledge necessary for these simulations. Given the centrality of teamwork to the success of MCC, holding SFRM training till late in the flow is inefficient. But to be able to train SFRM earlier in the flow, the training cannot rely on extensive mission-specific technical knowledge. Hence, the need for a generic SFRM training framework that would allow FCers to develop basic teamwork skills which are mission relevant, but without the required mission knowledge. Work on SFRM training has been conducted in collaboration with the Expedition Vehicle Division at the Mission Operations Directorate (MOD) and with United Space Alliance (USA) which provides training to Flight Controllers. The space flight resource management training work is part of the Human Factors in Training Directed Research Project (DRP) of the Space Human Factors Engineering (SHFE) Project under the Space Human Factors and Habitability (SHFH) Element of the Human Research Program (HRP). Human factors researchers at the Ames Research Center have been investigating team work and distributed decision making processes to develop a generic SFRM training framework for flight controllers. The work proposed for FY10 continues to build on this strong collaboration with MOD and the USA Training Group as well as previous research in relevant domains such as aviation. In FY10, the work focuses on documenting and analyzing problem solving strategies and decision making processes used in MCC by experienced FCers.

Towards an Online Bachelor of Information Science Degree Programme in a Nigerian University: Part 1--Lessons from the Literature and Existing Curricula

ERIC Educational Resources Information Center

Ajiferuke, Isola; Tiamiyu, Mutawakilu; Longe, Folake; Nwagwu, Williams; Ogunsola, Kemi; Opesade, Adeola; Olatokun, Wole

2012-01-01

Training programmes for the information professions worldwide have been shifting and diversifying the scope of their claimed domains and curricula in order to empower their graduates with diverse knowledge and versatile technical skills required to compete successfully in the highly competitive job markets in the information industries. In line…

Multimedia Courseware Development for World Heritage Sites and Its Trial Integration into Instruction in Higher Technical Education

ERIC Educational Resources Information Center

Tsai, Shu-Chiao

2011-01-01

This study reports on creative ways of using technology in the classroom, specifically the development of multimedia courseware on World Heritage through which learners are able to upgrade their knowledge and cognition regarding historical and cultural legacies from the past, and to improve English skills. The content of the pilot courseware…

1982 Massachusetts Employers' Satisfaction Survey. To Determine the Level of Employers' Satisfaction with the Skills of Vocational Education Graduates in Massachusetts. Final Report.

ERIC Educational Resources Information Center

TDR Associates, Inc., Newton, MA.

A survey conducted between April 1982 and January 1983 collected ratings of vocational training from former students, employers, and supervisors. Over 1,500 former students (completers and leavers) rated their vocational education in terms of technical knowledge, work attitude, work quality, overall rating, relative preparation in comparison to…

Issues of Teacher Identity in a Restructuring VET [Vocational Education and Training] System. Working Paper.

ERIC Educational Resources Information Center

Chappell, Clive

Much recent debate has suggested Australia's technical and further education (TAFE) teachers not only need new knowledge and skills but need to perform their professional practices in new ways and in new contexts. What this debate has failed to recognize is that these change discourses are in effect constructing new professional identities for…

The Association between Tolerance for Ambiguity and Fear of Negative Evaluation: A Study of Engineering Technology Capstone Courses

ERIC Educational Resources Information Center

Dubikovsky, Sergey I.

2016-01-01

For many students in engineering and engineering technology programs in the US, senior capstone design courses require students to form a team, define a problem, and find a feasible technical solution to address this problem. Students must integrate the knowledge and skills acquired during their studies at the college or university level. These…

Development of Model Systematic Trilateral Approach to Provide Continuing Education for Nursing Home and Small Hospital Personnel. Final Report.

ERIC Educational Resources Information Center

Schrader, Marvin A.; And Others

The project was designed to determine the feasibility of having a vocational technical adult education (VTAE) district provide continuing education inservice training for health care facilities using videotape equipment so that employees could gain knowledge and skills without leaving the facility or having to involve time outside the normal…

Team-Based Peer Review as a Form of Formative Assessment--The Case of a Systems Analysis and Design Workshop

ERIC Educational Resources Information Center

Lavy, Ilana; Yadin, Aharon

2010-01-01

The present study was carried out within a systems analysis and design workshop. In addition to the standard analysis and design tasks, this workshop included practices designed to enhance student capabilities related to non-technical knowledge areas, such as critical thinking, interpersonal and team skills, and business understanding. Each task…

[High fidelity simulation : a new tool for learning and research in pediatrics].

PubMed

Bragard, I; Farhat, N; Seghaye, M-C; Schumacher, K

2016-10-01

Caring for a sick child represents a high risk activity that requires technical and non-technical skills related to several factors such as the rarity of certain events or the stress of caring for a child. As regard these conditions, medi¬cal simulation provides a learning environment without risk, the control of variables, the reproducibility of situations, and the confrontation with rare events. In this article, we des¬cribe the steps of a simulation session and outline the current knowledge of the use of simulation in paediatrics. A session of simulation includes seven phases following the model of Peter Dieckmann, particularly the scenario and the debriefing that form the heart of the learning experience. Several studies have shown the advantages of simulation for paediatric trai¬ning in terms of changes in attitudes, skills and knowledge. Some studies have demonstrated a beneficial transfer to prac¬tice. In conclusion, simulation provides great potential for training and research in paediatrics. The establishment of a collaborative research program by the whole simulation com¬munity would help ensure that this type of training improves the quality of care.

Effect of a video on developing skills in undergraduate nursing students for the management of totally implantable central venous access ports.

PubMed

Cardoso, Ariane F; Moreli, Lucimara; Braga, Fernanda T M M; Vasques, Christiane I; Santos, Claudia B; Carvalho, Emilia C

2012-08-01

Handling Totally Implantable Access Ports (TIAP) is a nursing procedure that requires skill and knowledge to avoid adverse events. No studies addressing this procedure with undergraduate students were identified prior to this study. Communication technologies, such as videos, have been increasingly adopted in the teaching of nursing and have contributed to the acquisition of competencies for clinical performance. To evaluate the effect of a video on the puncture and heparinization of TIAP in the development of cognitive and technical competencies of undergraduate nursing students. Quasi-experimental study with a pretest-posttest design. 24 individuals participated in the study. Anxiety scores were kept at levels 1 and 2 in the pretest and posttest. In relation to cognitive knowledge concerning the procedure, the proportion of correct answers in the pretest was 0.14 (SD=0.12) and 0.90 in the posttest (SD=0.05). After watching the video, the average score obtained by the participants in the mock session was 27.20. The use of an educational video with a simulation of puncture and heparinization of TIAP proved to be a strategy that increased both cognitive and technical knowledge. This strategy is viable in the teaching-learning process and is useful as a support tool for professors and for the development of undergraduate nursing students. Copyright © 2011 Elsevier Ltd. All rights reserved.

Guiding dental student learning and assessing performance in critical thinking with analysis of emerging strategies.

PubMed

Johnsen, David C; Lipp, Mitchell J; Finkelstein, Michael W; Cunningham-Ford, Marsha A

2012-12-01

Patient-centered care involves an inseparable set of knowledge, abilities, and professional traits on the part of the health care provider. For practical reasons, health professions education is segmented into disciplines or domains like knowledge, technical skills, and critical thinking, and the culture of dental education is weighted toward knowledge and technical skills. Critical thinking, however, has become a growing presence in dental curricula. To guide student learning and assess performance in critical thinking, guidelines have been developed over the past several decades in the educational literature. Prominent among these guidelines are the following: engage the student in multiple situations/exercises reflecting critical thinking; for each exercise, emulate the intended activity for validity; gain agreement of faculty members across disciplines and curriculum years on the learning construct, application, and performance assessment protocol for reliability; and use the same instrument to guide learning and assess performance. The purposes of this article are 1) to offer a set of concepts from the education literature potentially helpful to guide program design or corroborate existing programs in dental education; 2) to offer an implementation model consolidating these concepts as a guide for program design and execution; 3) to cite specific examples of exercises and programs in critical thinking in the dental education literature analyzed against these concepts; and 4) to discuss opportunities and challenges in guiding student learning and assessing performance in critical thinking for dentistry.

Do failures in non-technical skills contribute to fatal medical accidents in Japan? A review of the 2010–2013 national accident reports

PubMed Central

Uramatsu, Masashi; Fujisawa, Yoshikazu; Mizuno, Shinya; Souma, Takahiro; Komatsubara, Akinori; Miki, Tamotsu

2017-01-01

Objectives We sought to clarify how large a proportion of fatal medical accidents can be considered to be caused by poor non-technical skills, and to support development of a policy to reduce number of such accidents by making recommendations about possible training requirements. Design Summaries of reports of fatal medical accidents, published by the Japan Medical Safety Research Organization, were reviewed individually. Three experienced clinicians and one patient safety expert conducted the reviews to determine the cause of death. Views of the patient safety expert were given additional weight in the overall determination. Setting A total of 73 summary reports of fatal medical accidents were reviewed. These reports had been submitted by healthcare organisations across Japan to the Japan Medical Safety Research Organization between April 2010 and March 2013. Primary and secondary outcome measures The cause of death in fatal medical accidents, categorised into technical skills, non-technical skills and inevitable progress of disease were evaluated. Non-technical skills were further subdivided into situation awareness, decision making, communication, team working, leadership, managing stress and coping with fatigue. Results Overall, the cause of death was identified as non-technical skills in 34 cases (46.6%), disease progression in 33 cases (45.2%) and technical skills in two cases (5.5%). In two cases, no consensual determination could be achieved. Further categorisation of cases of non-technical skills were identified as 14 cases (41.2%) of problems with situation awareness, eight (23.5%) with team working and three (8.8%) with decision making. These three subcategories, or combinations of them, were identified as the cause of death in 33 cases (97.1%). Conclusions Poor non-technical skills were considered to be a significant cause of adverse events in nearly half of the fatal medical accidents examined. Improving non-technical skills may be effective for reducing accidents, and training in particular subcategories of non-technical skills may be especially relevant. PMID:28209605

The role of simulation training in anesthesiology resident education.

PubMed

Yunoki, Kazuma; Sakai, Tetsuro

2018-06-01

An increasing number of reports indicate the efficacy of simulation training in anesthesiology resident education. Simulation education helps learners to acquire clinical skills in a safe learning environment without putting real patients at risk. This useful tool allows anesthesiology residents to obtain medical knowledge and both technical and non-technical skills. For faculty members, simulation-based settings provide the valuable opportunity to evaluate residents' performance in scenarios including airway management and regional, cardiac, and obstetric anesthesiology. However, it is still unclear what types of simulators should be used or how to incorporate simulation education effectively into education curriculums. Whether simulation training improves patient outcomes has not been fully determined. The goal of this review is to provide an overview of the status of simulation in anesthesiology resident education, encourage more anesthesiologists to get involved in simulation education to propagate its influence, and stimulate future research directed toward improving resident education and patient outcomes.

If it takes two to tango, then why not teach both partners to dance? Collaboration instruction for all educators.

PubMed

Hudson, P; Glomb, N

1997-01-01

Being able to collaborate effectively is important for teachers who work together to serve students with learning disabilities in general education classrooms. Effective collaboration requires that teachers have knowledge and skills in how to effectively communicate and share their technical expertise for the purpose of solving classroom problems and providing continuity across instructional settings. Although both special education and general education preparation programs provide preservice teachers with the technical expertise for their respective areas of certification, few programs provide both special education and general education majors with instruction in interpersonal communication skills and collaboration strategies. The purpose of this article is to suggest guidelines and strategies to help teacher preparation programs move toward collaboration instruction for all educators. Suggestions for what to teach and how to teach it are offered, as well as an overview of factors that influence the implementation of collaboration instruction for all educators.

Surgeons' and trainees' perceived self-efficacy in operating theatre non-technical skills.

PubMed

Pena, G; Altree, M; Field, J; Thomas, M J W; Hewett, P; Babidge, W; Maddern, G J

2015-05-01

An important factor that may influence an individual's performance is self-efficacy, a personal judgement of capability to perform a particular task successfully. This prospective study explored newly qualified surgeons' and surgical trainees' self-efficacy in non-technical skills compared with their non-technical skills performance in simulated scenarios. Participants undertook surgical scenarios challenging non-technical skills in two simulation sessions 6 weeks apart. Some participants attended a non-technical skills workshop between sessions. Participants completed pretraining and post-training surveys about their perceived self-efficacy in non-technical skills, which were analysed and compared with their performance in surgical scenarios in two simulation sessions. Change in performance between sessions was compared with any change in participants' perceived self-efficacy. There were 40 participants in all, 17 of whom attended the non-technical skills workshop. There was no significant difference in participants' self-efficacy regarding non-technical skills from the pretraining to the post-training survey. However, there was a tendency for participants with the highest reported self-efficacy to adjust their score downwards after training and for participants with the lowest self-efficacy to adjust their score upwards. Although there was significant improvement in non-technical skills performance from the first to second simulation sessions, a correlation between participants' self-efficacy and performance in scenarios in any of the comparisons was not found. The results suggest that new surgeons and surgical trainees have poor insight into their non-technical skills. Although it was not possible to correlate participants' self-belief in their abilities directly with their performance in a simulation, in general they became more critical in appraisal of their abilities as a result of the intervention. © 2015 BJS Society Ltd Published by John Wiley & Sons Ltd.

A novel approach to assessing technical competence of colorectal surgery residents: the development and evaluation of the Colorectal Objective Structured Assessment of Technical Skill (COSATS).

PubMed

de Montbrun, Sandra L; Roberts, Patricia L; Lowry, Ann C; Ault, Glenn T; Burnstein, Marcus J; Cataldo, Peter A; Dozois, Eric J; Dunn, Gary D; Fleshman, James; Isenberg, Gerald A; Mahmoud, Najjia N; Reznick, Richard K; Satterthwaite, Lisa; Schoetz, David; Trudel, Judith L; Weiss, Eric G; Wexner, Steven D; MacRae, Helen

2013-12-01

To develop and evaluate an objective method of technical skills assessment for graduating subspecialists in colorectal (CR) surgery-the Colorectal Objective Structured Assessment of Technical Skill (COSATS). It may be reasonable for the public to assume that surgeons certified as competent have had their technical skills assessed. However, technical skill, despite being the hallmark of a surgeon, is not directly assessed at the time of certification by surgical boards. A procedure-based, multistation technical skills examination was developed to reflect a sample of the range of skills necessary for CR surgical practice. These consisted of bench, virtual reality, and cadaveric models. Reliability and construct validity were evaluated by comparing 10 graduating CR residents with 10 graduating general surgery (GS) residents from across North America. Expert CR surgeons, blinded to level of training, evaluated performance using a task-specific checklist and a global rating scale. The mean global rating score was used as the overall examination score and a passing score was set at "borderline competent for CR practice." The global rating scale demonstrated acceptable interstation reliability (0.69) for a homogeneous group of examinees. Both the overall checklist and global rating scores effectively discriminated between CR and GS residents (P < 0.01), with 27% of the variance attributed to level of training. Nine CR residents but only 3 GS residents were deemed competent. The Colorectal Objective Structured Assessment of Technical Skill effectively discriminated between CR and GS residents. With further validation, the Colorectal Objective Structured Assessment of Technical Skill could be incorporated into the colorectal board examination where it would be the first attempt of a surgical specialty to formally assess technical skill at the time of certification.

Classroom Journal Club: Collaborative Study of Contemporary Primary Literature in the Biomechanics Classroom.

PubMed

Kuxhaus, Laurel; Corbiere, Nicole C

2016-07-01

Current engineering pedagogy primarily focuses on developing technical proficiency and problem solving skills; the peer-review process for sharing new research results is often overlooked. The use of a collaborative classroom journal club can engage students with the excitement of scientific discovery and the process of dissemination of research results, which are also important lifelong learning skills. In this work, a classroom journal club was implemented and a survey of student perceptions spanning three student cohorts was collected. In this collaborative learning activity, students regularly chose and discussed a recent biomechanics journal article, and were assessed based on specific, individual preparation tasks. Most student-chosen journal articles were relevant to topics discussed in the regular class lecture. Surveys assessed student perceptions of the activity. The survey responses show that, across all cohorts, students both enjoyed the classroom journal club and recognized it as an important learning experience. Many reported discussing their journal articles with others outside of the classroom, indicating good engagement. The results demonstrate that student engagement with primary literature can foster both technical knowledge and lifelong learning skills.

Framework for incorporating simulation into urology training.

PubMed

Arora, Sonal; Lamb, Benjamin; Undre, Shabnam; Kneebone, Roger; Darzi, Ara; Sevdalis, Nick

2011-03-01

• Changes to working hours, new technologies and increased accountability have rendered the need for alternative training environments for urologists. • Simulation offers a promising arena for learning to take place in a safe, realistic setting. • Despite its benefits, the incorporation of simulation into urological training programmes remains minimal. • The current status and future directions of simulation for training in technical and non-technical skills are reviewed as they pertain to urology. • A framework is presented for how simulation-based training could be incorporated into the entire urological curriculum. • The literature on simulation in technical and non-technical skills training is reviewed, with a specific focus upon urology. • To fully integrate simulation into a training curriculum, its possibilities for addressing all the competencies required by a urologist must be realized. • At an early stage of training, simulation has been used to develop basic technical skills and cognitive skills, such as decision-making and communication. • At an intermediate stage, the studies focus upon more advanced technical skills learnt with virtual reality simulators. • Non-technical skills training would include leadership and could be delivered with in situ models. • At the final stage, experienced trainees can practise technical and non-technical skills in full crisis simulations situated within a fully-simulated operating rooms. • Simulation can provide training in the technical and non-technical skills required to be a competent urologist. • The framework presented may guide how best to incorporate simulation into training curricula. • Future work should determine whether acquired skills transfer to clinical practice and improve patient care. © 2010 THE AUTHORS. BJU INTERNATIONAL © 2010 BJU INTERNATIONAL.

Technical Skill Attainment and Post-Program Outcomes: An Analysis of Pennsylvania Secondary Career and Technical Education Graduates

ERIC Educational Resources Information Center

Staklis, Sandra; Klein, Steven

2010-01-01

Since the mid-1990s, the Pennsylvania Department of Education (PDE) has required all students concentrating in career and technical education (CTE) programs to complete a standardized technical skill assessment at or near the end of their program. Results of technical skill assessments are used for a number of purposes, including recognizing…

The role of non-technical skills in surgery

PubMed Central

Agha, Riaz A.; Fowler, Alexander J.; Sevdalis, Nick

2015-01-01

Non-technical skills are of increasing importance in surgery and surgical training. A traditional focus on technical skills acquisition and competence is no longer enough for the delivery of a modern, safe surgical practice. This review discusses the importance of non-technical skills and the values that underpin successful modern surgical practice. This narrative review used a number of sources including written and online, there was no specific search strategy of defined databases. Modern surgical practice requires; technical and non-technical skills, evidence-based practice, an emphasis on lifelong learning, monitoring of outcomes and a supportive institutional and health service framework. Finally these requirements need to be combined with a number of personal and professional values including integrity, professionalism and compassionate, patient-centred care. PMID:26904193

Sales skills for health-care professionals: the emotional side of sales.

PubMed

Nigon, D L

2001-01-01

Health-care sales continues to be an area of opportunity for many laboratory professionals. For those who possess the necessary skills and the desire to enthusiastically embrace the unique challenges of a sales career, a new CLMA publication by CLMR contributor Donna L. Nigon, MT(ASCP), titled Sales Skills for Health-Care Professionals, will provide the knowledge of sales structure and techniques needed to succeed. This Sales Skills excerpt, "The Emotional Side of Sales," describes many of the emotional aspects of sales and selling, including how to handle the transition from a technical or medical role to that of sales representative, relationship building, maintaining personal and professional support systems, dealing with rejection, avoiding burnout, time management, and customer concerns. For more information about this book, please see the order form that accompanies this excerpt, or visit www.clma.org.

Non-technical skills assessment in surgery.

PubMed

Sharma, Bharat; Mishra, Amit; Aggarwal, Rajesh; Grantcharov, Teodor P

2011-09-01

Adverse events in surgery have highlighted the importance of non-technical skills, such as communication, decision-making, teamwork, situational awareness and leadership, to effective organizational performance. These skills carry particular importance to surgical oncology, as members of a multidisciplinary team must work cohesively to formulate effective patient care plans. Several non-technical skills evaluation tools have been developed for use in surgery, without adequate comparison and consensus on which should be standard for training. Eleven articles describing the use of three non-technical evaluation tools related to surgery: NOTSS (Non Technical Skills for Surgeons), NOTECHS (Non Technical Skills) and OTAS (Observational Teamwork Assessment for Surgery) were analyzed with respect to scale formulation, validity, reliability and feasibility. Furthermore, their use in training thus far and the future of non-technical rating scales in surgical curricula was discussed. Future work should focus on incorporating these assessment tools into training and into a real operating room setting to provide formative evaluations for surgical residents. Copyright © 2010 Elsevier Ltd. All rights reserved.

The Relationship Between Technical And Nontechnical Skills Within A Simulation-Based Ureteroscopy Training Environment.

PubMed

Brunckhorst, Oliver; Shahid, Shahab; Aydin, Abdullatif; Khan, Shahid; McIlhenny, Craig; Brewin, James; Sahai, Arun; Bello, Fernando; Kneebone, Roger; Shamim Khan, Muhammad; Dasgupta, Prokar; Ahmed, Kamran

2015-01-01

Little integration of technical and nontechnical skills (e.g., situational awareness, communication, decision making, teamwork, and leadership) teaching exists within surgery. We therefore aimed to (1) evaluate the relationship between these 2 skill sets within a simulation-based environment and (2) assess if certain nontechnical skill components are of particular relevance to technical performance. A prospective analysis of data acquired from a comparative study of simulation vs nonsimulation training was conducted. Half of the participants underwent training of technical and nontechnical skills within ureteroscopy, with the remaining half undergoing no training. All were assessed within a full immersion environment against both technical (time to completion, Objective Structured Assessment of Technical Skills, and task-specific checklist scores) and nontechnical parameters (Nontechnical Skills for Surgeons [NOTSS] rating scale). The data of whole and individual cohorts were analyzed using Pearson correlation coefficient. The trial took place within the Simulation and Interactive Learning Centre at Guy's Hospital, London, UK. In total, 32 novice participants with no prior practical ureteroscopy experience were included within the data analysis. A correlation was found within all outcome measures analyzed. For the whole cohort, a strong negative correlation was found between time to completion and NOTSS scores (r = -0.75, p < 0.001), with strong positive correlations identified when NOTSS scores were compared with Objective Structured Assessment of Technical Skills (r = 0.89, p < 0.001) and task-specific checklist scores (r = 0.91, p < 0.001). Similar results were observed when each cohort was analyzed separately. Finally, all individual nontechnical skill components demonstrated a strong correlation with all technical skill parameters, regardless of training. A strong correlation between technical and nontechnical performance exists, which was demonstrated to be irrespective of training received. This may suggest an inherent link between skill sets. Furthermore, all nontechnical skill sets are important in technical performance. This supports the notion that both of these skills should be trained and assessed together within 1 curriculum. Copyright © 2015 Association of Program Directors in Surgery. Published by Elsevier Inc. All rights reserved.

Soft Skills: The New Curriculum for Hard-Core Technical Professionals

ERIC Educational Resources Information Center

Bancino, Randy; Zevalkink, Claire

2007-01-01

In this article, the authors talk about the importance of soft skills for hard-core technical professionals. In many technical professions, the complete focus of education and training is on technical topics either directly or indirectly related to a career or discipline. Students are generally required to master various mathematics skills,…

Training experiences immediately after medical school.

PubMed

Roche, A M; Sanson-Fisher, R W; Cockburn, J

1997-01-01

Trainees in all teaching hospitals in New South Wales were surveyed using a self-completion, postal questionnaire to assess perceptions of the quality and extent of training received for interactional and technical skills. The response rate was 67.1%. Mean age was 25.4 years and 38.8% were female. Overall, training was found to be generally poor in terms of time and educational strategies used. Interactional skills were found to receive lower levels of training than technical skills both prior to and during the intern year with significantly fewer (P < 0.000) educational strategies reported for training received in interactional skills than for technical skills. Trainees' perceptions of the adequacy of training was significantly more negative for interactional than technical skills (P < 0.001). Assessment of competence was also significantly lower for interactional than technical skills (P < 0.001). On average, fewer than one in three trainees considered themselves to be competent in interactional skills compared to two-thirds who reported themselves as competent for technical skills. The findings of this study highlight the need for improved efforts with regard to both the quality and quantity of training provided during the intern year. Considerable scope exists for improved educational experiences for both interactional and technical skill areas, but particularly for interactional skills. Overall, greater use of a range of basic educational strategies such as the provision of 'observation' and 'critical feedback' is indicated. Efforts also need to be directed toward the training of clinical educators to optimize the potential of the preregistration period.

The Native Telehealth Outreach and Technical Assistance Program: a community-based approach to the development of multimedia-focused health care information.

PubMed

Dick, Rhonda Wiegman; Manson, Spero M; Hansen, Amy L; Huggins, Annie; Trullinger, Lori

2007-01-01

The development and dissemination of culturally relevant health care information has traditionally taken a "top-down" approach. Governmental funding agencies and research institutions have too often dictated the importance and focus of health-related research and information dissemination. In addition, the digital divide has affected rural communities in such a way that their members often do not possess the knowledge or experience necessary to use technological resources. And, even when they do, their skills may be limited, adequate only for implementing applications and programs designed by others who live and work outside of these communities. This need became the driving force in the creation of the Native Telehealth Outreach and Technical Assistance Program. The goal of the program is to equip Native community members, at both the lay and professional levels, with the means to use technology to address tribal health care needs. The transfer of relevant technical knowledge and skills enables participants to develop projects which enhance the community-wide dissemination of health care information. Nine community health advocates and professionals participated in the initial cohort. Eight of the participants successfully developed multimedia-based projects including Web sites, interactive CD-ROMs, and video focusing on a variety of health concerns. At the conclusion of the 18-month program period, projects were disseminated throughout rural communities. The NTOTAP staff continues to evaluate the use of these projects and their benefits within the rural communities.

Non-technical skills of surgical trainees and experienced surgeons.

PubMed

Gostlow, H; Marlow, N; Thomas, M J W; Hewett, P J; Kiermeier, A; Babidge, W; Altree, M; Pena, G; Maddern, G

2017-05-01

In addition to technical expertise, surgical competence requires effective non-technical skills to ensure patient safety and maintenance of standards. Recently the Royal Australasian College of Surgeons implemented a new Surgical Education and Training (SET) curriculum that incorporated non-technical skills considered essential for a competent surgeon. This study sought to compare the non-technical skills of experienced surgeons who completed their training before the introduction of SET with the non-technical skills of more recent trainees. Surgical trainees and experienced surgeons undertook a simulated scenario designed to challenge their non-technical skills. Scenarios were video recorded and participants were assessed using the Non-Technical Skills for Surgeons (NOTSS) scoring system. Participants were divided into subgroups according to years of experience and their NOTSS scores were compared. For most NOTSS elements, mean scores increased initially, peaking around the time of Fellowship, before decreasing roughly linearly over time. There was a significant downward trend in score with increasing years since being awarded Fellowship for six of the 12 NOTSS elements: considering options (score -0·015 units per year), implementing and reviewing decisions (-0·020 per year), establishing a shared understanding (-0·014 per year), setting and maintaining standards (-0·024 per year), supporting others (-0·031 per year) and coping with pressure (-0·015 per year). The drop in NOTSS score was unexpected and highlights that even experienced surgeons are not immune to deficiencies in non-technical skills. Consideration should be given to continuing professional development programmes focusing on non-technical skills, regardless of the level of professional experience. © 2017 BJS Society Ltd Published by John Wiley & Sons Ltd.

Crowdsourcing: a valid alternative to expert evaluation of robotic surgery skills.

PubMed

Polin, Michael R; Siddiqui, Nazema Y; Comstock, Bryan A; Hesham, Helai; Brown, Casey; Lendvay, Thomas S; Martino, Martin A

2016-11-01

Robotic-assisted gynecologic surgery is common, but requires unique training. A validated assessment tool for evaluating trainees' robotic surgery skills is Robotic-Objective Structured Assessments of Technical Skills. We sought to assess whether crowdsourcing can be used as an alternative to expert surgical evaluators in scoring Robotic-Objective Structured Assessments of Technical Skills. The Robotic Training Network produced the Robotic-Objective Structured Assessments of Technical Skills, which evaluate trainees across 5 dry lab robotic surgical drills. Robotic-Objective Structured Assessments of Technical Skills were previously validated in a study of 105 participants, where dry lab surgical drills were recorded, de-identified, and scored by 3 expert surgeons using the Robotic-Objective Structured Assessments of Technical Skills checklist. Our methods-comparison study uses these previously obtained recordings and expert surgeon scores. Mean scores per participant from each drill were separated into quartiles. Crowdworkers were trained and calibrated on Robotic-Objective Structured Assessments of Technical Skills scoring using a representative recording of a skilled and novice surgeon. Following this, 3 recordings from each scoring quartile for each drill were randomly selected. Crowdworkers evaluated the randomly selected recordings using Robotic-Objective Structured Assessments of Technical Skills. Linear mixed effects models were used to derive mean crowdsourced ratings for each drill. Pearson correlation coefficients were calculated to assess the correlation between crowdsourced and expert surgeons' ratings. In all, 448 crowdworkers reviewed videos from 60 dry lab drills, and completed a total of 2517 Robotic-Objective Structured Assessments of Technical Skills assessments within 16 hours. Crowdsourced Robotic-Objective Structured Assessments of Technical Skills ratings were highly correlated with expert surgeon ratings across each of the 5 dry lab drills (r ranging from 0.75-0.91). Crowdsourced assessments of recorded dry lab surgical drills using a validated assessment tool are a rapid and suitable alternative to expert surgeon evaluation. Copyright © 2016 Elsevier Inc. All rights reserved.

IRT Analysis of General Outcome Measures in Grades 1-8. Technical Report # 0916

ERIC Educational Resources Information Center

Alonzo, Julie; Anderson, Daniel; Tindal, Gerald

2009-01-01

We present scaling outcomes for mathematics assessments used in the fall to screen students at risk of failing to learn the knowledge and skills described in the National Council of Teachers of Mathematics (NCTM) Focal Point Standards. At each grade level, the assessment consisted of a 48-item test with three 16-item sub-test sets aligned to the…

Promoting Health Through Schools. Report of a WHO Expert Committee on Comprehensive School Health Education and Promotion. WHO Technical Report Series 870.

ERIC Educational Resources Information Center

WHO Technical Report Series, 1997

1997-01-01

By acquiring health-related knowledge, values, skills, and practices, children can be empowered to pursue a healthy life and to work as change agents for community health. This report of the WHO Expert Committee on Comprehensive School Health Education and Promotion reviews the global state of school health; identifies opportunities for and…

High educational impact of a national simulation-based urological curriculum including technical and non-technical skills.

PubMed

de Vries, Anna H; Schout, Barbara M A; van Merriënboer, Jeroen J G; Pelger, Rob C M; Koldewijn, Evert L; Muijtjens, Arno M M; Wagner, Cordula

2017-02-01

Although simulation training is increasingly used to meet modern technology and patient safety demands, its successful integration within surgical curricula is still rare. The Dutch Urological Practical Skills (D-UPS) curriculum provides modular simulation-based training of technical and non-technical basic urological skills in the local hospital setting. This study aims to assess the educational impact of implementing the D-UPS curriculum in the Netherlands and to provide focus points for improvement of the D-UPS curriculum according to the participants. Educational impact was assessed by means of qualitative individual module-specific feedback and a quantitative cross-sectional survey among residents and supervisors. Twenty out of 26 Dutch teaching hospitals participated. The survey focussed on practical aspects, the D-UPS curriculum in general, and the impact of the D-UPS curriculum on the development of technical and non-technical skills. A considerable survey response of 95 % for residents and 76 % for supervisors was obtained. Modules were attended by junior and senior residents, supervised by a urologist, and peer teaching was used. Ninety percent of supervisors versus 67 % of residents judged the D-UPS curriculum as an important addition to current residency training (p = 0.007). Participants' aggregated general judgement of the modules showed a substantial percentage favorable score (M ± SE: 57 ± 4 %). The impact of training on, e.g., knowledge of materials/equipment and ability to anticipate on complications was high, especially for junior residents (77 ± 5 and 71 ± 7 %, respectively). Focus points for improvement of the D-UPS curriculum according to the participants include adaptation of the training level to residents' level of experience and focus on logistics. The simulation-based D-UPS curriculum has a high educational impact. Residents and supervisors consider the curriculum to be an important addition to current residency training. Focus points for improvement of the D-UPS curriculum according to the participants include increased attention to logistics and integration of a spiral learning approach.

Impact of clinical leadership in teams’ course on quality, efficiency, responsiveness and trust in the emergency department: study protocol of a trailing research study

PubMed Central

Husebø, Sissel Eikeland; Olsen, Øystein Evjen

2016-01-01

Introduction Clinical leadership has long been recognised as critical for optimising patient safety, quality of care and interprofessional teamwork in busy and stressful healthcare settings. There is a need to compensate for the absence of the conventional mentor-to-apprentice transfer of clinical leadership knowledge and skills. While young doctors and nurses are increasingly proficient in medical, surgical and technical skills, their training in, and knowledge of clinical leadership skills, is not adequate to meet the demands for these non-technical skills in the emergency department. Thus, the purpose of the paper is to present and discuss the study protocol of clinical leadership in a course for teams that aims to improve quality, efficiency, responsiveness of healthcare services and collegial trust in the emergency department. Methods and analysis The study employs a trailing research design using multiple quantitative and qualitative methods in the summative (pretest and post-test) and formative evaluation. Quantitative data have been collected from a patient questionnaire, the emergency departments’ database and by the observation of team performance. Qualitative data have been collected by shadowing healthcare professionals and through focus group interviews. To ensure trustworthiness in the data analysis, we will apply member checks and analyst triangulation, in addition to providing contextual and sample description to allow for evaluation of transferability of our results to other contexts and groups. Ethics and dissemination The study is approved by the ethics committee of the western part of Norway and the hospital. The study is based on voluntary participation and informed written consent. Informants can withdraw at any point in time. The results will be disseminated at research conferences, peer review journals and through public presentations to people outside the scientific community. PMID:27515758

English Skills for Engineers Required by the English Technical Writing Test

NASA Astrophysics Data System (ADS)

Kyouno, Noboru

Japanese English education has focused mainly on teaching passive skills such as reading and listening, whereas actual business activities in society require active skills such as writing and speaking in addition to the passive skills. This educational situation is estimated to be a reason Japanese engineers are less confident in writing and speaking than in reading and listening. This paper focuses on details of the English Technical Writing Test provided by the Japan Society of Technical Communication and emphasizes the importance of the active skills, mainly focusing on what skills should be taught in the future and how to develop these skills. This paper also stresses the necessity of learning rhetoric-related skills, concept of information words, as well as paragraph reading and writing skills based on the concept of the 3Cs (Correct, Clear, and Concise) as a means to develop technical writing skills for engineers.

NASA/DOD Aerospace Knowledge Diffusion Research Project. Paper 61: The Technical Communications Practices of ESL Aerospace Engineering Students in the United States: Results of a National Survey

NASA Technical Reports Server (NTRS)

Webb, John R.; Pinelli, Thomas E.; Barclay, Rebecca O.; Kennedy, John M.

1997-01-01

When engineering students graduate and enter the world of work, they make the transition from an academic to a professional community of knowledge. The importance of oral and written communication to the professional success and advancement of engineers is well documented. For example, studies such as those conducted by Mailloux (1989) indicate that communicating data, information, and knowledge takes up as much as 80% of an engineer's time. However, these same studies also indicate that many engineering graduates cannot (a) write technical reports that effectively inform and influence decisionmaking, (b) present their ideas persuasively, and (c) communicate with their peers. If these statements are true, how is learning to communicate effectively in their professional knowledge community different for engineering students educated in the United States but who come from other cultures-cultures in which English is not the primary language of communication? Answering this question requires adequate and generalizable data about these students' communications abilities, skills, and competencies. To contribute to the answer, we undertook a national (mail) survey of 1,727 student members of the American Institute of Aeronautics and Astronautics (AIAA). The focus of our analysis and this paper is a comparison of the responses of 297 student members for whom English is a second language with the responses of 1,430 native English speaking students to queries regarding career choice, bilingualism and language fluency, communication skills, collaborative writing, computer use, and the use of electronic (computer) networks.

Development of a behavioural marker system for scrub practitioners' non-technical skills (SPLINTS system).

PubMed

Mitchell, Lucy; Flin, Rhona; Yule, Steven; Mitchell, Janet; Coutts, Kathy; Youngson, George

2013-04-01

Adverse events still occur despite ongoing efforts to reduce harm to patients. Contributory factors to adverse events are often due to limitations in clinicians' non-technical skills (e.g. communication, situation awareness), rather than deficiencies in technical competence. We developed a behavioural rating system to provide a structured means for teaching and assessing scrub practitioners' (i.e. nurse, technician, operating department practitioner) non-technical skills. Psychologists facilitated focus groups (n = 4) with experienced scrub practitioners (n = 16; 4 in each group) to develop a preliminary taxonomy. Focus groups reviewed lists of non-technical-skill-related behaviours that were extracted from an interview study. The focus groups labelled skill categories and elements and also provided examples of good and poor behaviours for those skills. An expert panel (n = 2 psychologists; n = 1 expert nurse) then used an iterative process to individually and collaboratively review and refine those data to produce a prototype skills taxonomy. A preliminary taxonomy containing eight non-technical skill categories with 28 underlying elements was produced. The expert panel reduced this to three categories (situation awareness, communication and teamwork, task management), each with three underlying elements. The system was called the Scrub Practitioners' List of Intraoperative Non-Technical Skills system. A scoring system and a user handbook were also developed. A prototype behavioural rating system for scrub practitioners' non-technical skills was developed, to aid in teaching and providing formative assessment. This important aspect of performance is not currently explicitly addressed in any educational route to qualify as a scrub practitioner. © 2012 Blackwell Publishing Ltd.

Do failures in non-technical skills contribute to fatal medical accidents in Japan? A review of the 2010-2013 national accident reports.

PubMed

Uramatsu, Masashi; Fujisawa, Yoshikazu; Mizuno, Shinya; Souma, Takahiro; Komatsubara, Akinori; Miki, Tamotsu

2017-02-16

We sought to clarify how large a proportion of fatal medical accidents can be considered to be caused by poor non-technical skills, and to support development of a policy to reduce number of such accidents by making recommendations about possible training requirements. Summaries of reports of fatal medical accidents, published by the Japan Medical Safety Research Organization, were reviewed individually. Three experienced clinicians and one patient safety expert conducted the reviews to determine the cause of death. Views of the patient safety expert were given additional weight in the overall determination. A total of 73 summary reports of fatal medical accidents were reviewed. These reports had been submitted by healthcare organisations across Japan to the Japan Medical Safety Research Organization between April 2010 and March 2013. The cause of death in fatal medical accidents, categorised into technical skills, non-technical skills and inevitable progress of disease were evaluated. Non-technical skills were further subdivided into situation awareness, decision making, communication, team working, leadership, managing stress and coping with fatigue. Overall, the cause of death was identified as non-technical skills in 34 cases (46.6%), disease progression in 33 cases (45.2%) and technical skills in two cases (5.5%). In two cases, no consensual determination could be achieved. Further categorisation of cases of non-technical skills were identified as 14 cases (41.2%) of problems with situation awareness, eight (23.5%) with team working and three (8.8%) with decision making. These three subcategories, or combinations of them, were identified as the cause of death in 33 cases (97.1%). Poor non-technical skills were considered to be a significant cause of adverse events in nearly half of the fatal medical accidents examined. Improving non-technical skills may be effective for reducing accidents, and training in particular subcategories of non-technical skills may be especially relevant. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/.

The Relationship between Self-Concept and Self-Ratings of Generalizable Skills of Students in Postsecondary Career and Technical Programs

ERIC Educational Resources Information Center

Kraebber, Sharon L.; Greenan, James P.

2012-01-01

Increasingly, employers desire skills that have traditionally been the purview of high schools and postsecondary career and technical training systems: reading and writing, applied mathematics, and technical and functional skills specific to an occupational area. However, employers also want employees to possess generic skills, employability…

Integration of role-playing into technical skills training: a randomized controlled trial.

PubMed

Nikendei, C; Kraus, B; Schrauth, M; Weyrich, P; Zipfel, S; Herzog, W; Jünger, J

2007-11-01

Recently, efforts have been undertaken to enhance the face validity of technical skills training by introducing role-plays and standardised patients. Since little is known about the effects of role-playing with respect to the realism of a training situation and students' objective performance, we performed a randomized controlled trial. 36 medical students participated in videotaped small group skills-lab sessions on the topics of Doppler sonography and gastric tube insertion. One half of the students participated in role-plays and the other half practised without role-playing. Realism of the training situation was analysed by means of post-intervention self-selected student survey evaluations. Technical performance and patient-physician communication were assessed by independent ratings of the videotaped sessions. The physician's role was regarded to be significantly more realistic when performing role-plays. Assessment of videotaped sessions showed that practising technical skills by performing role-plays resulted in significantly better patient-physician communication whereas students' technical performance did not differ between groups. Introducing role-plays enhances the realism of technical skills training and leads to better patient-physician communication. Students do not seem to be overstrained by practising clinical technical skills using role-plays. We conclude that role-playing is a valuable method in practising technical skills.

[Quality assurance in airway management: education and training for difficult airway management].

PubMed

Kaminoh, Yoshiroh

2006-01-01

Respiratory problem is one of the main causes of death or severe brain damage in perioperative period. Three major factors of respiratory problem are esophageal intubation, inadequate ventilation, and difficult airway. The wide spread of pulse oximeter and capnograph reduced the incidences of esophageal intubation and inadequate ventilation, but the difficult airway still occupies the large portion in the causes of adverse events during anesthesia. "Practice guideline for management of the difficult airway" was proposed by American Society of Anesthesiologists (ASA) in 1992 and 2002. Improvement of knowledge, technical skills, and cognitive skills are necessary for the education and training of the difficult airway management. "The practical seminar of difficult airway management (DAM practical seminar)" has been cosponsored by the Japanese Association of Medical Simulation (JAMS) in the 51 st and 52 nd annual meetings of Japanese Society of Anesthesiologists and the 24th annual meeting of Japanese Society for Clinical Anesthesia. The DAM practical seminar is composed of the lecture session for ASA difficult airway algorithm, the hands-on training session for technical skills, and the scenario-based training session for cognitive skills. Ninty six Japanese anesthesiologists have completed the DAM practical seminar in one year. "The DAM instructor course" should be immediately prepared to organize the seminar more frequently.

The Effects of In-Nature and Virtual-Nature Field Trip Experiences On Proenvironmental Attitudes and Behaviors, And Environmental Knowledge Of Middle School Students

NASA Astrophysics Data System (ADS)

Ferderbar, Catherine A.

To develop sustainable solutions to remediate the complex ecological problems of earth's soil, water, and air degradation requires the talents and skills of knowledgeable, motivated people (UNESCO, 1977; UNESCO, 2010). Researchers historically emphasized that time spent in outdoor, nature activities (Wells & Lekies, 2006), particularly with an adult mentor (Chawla & Cushing, 2007), promotes environmental knowledge and nature-relatedness, precursors to environmental literacy. Research has also demonstrated that technology is integral to the lives of youth, who spend 7:38 hours daily (Rideout, et al., 2010), engaged in electronics. Educators would benefit from knowing if in-nature and virtual-nature field trip experiences provide comparable levels of knowledge and connectedness, to nurture student proenvironmentalism. To investigate field trip phenomena, the researcher studied the impact of virtual-nature and in-nature experiences during which students analyzed water quality along Midwestern rivers. The quasi-experimental, mixed method convergent parallel design with a purposeful sample (n=131) of middle school students from two Midwestern K-8 schools, utilized scientist participant observer field records and narrative response, written assessment aligned to field trip content to evaluate knowledge acquisition. To gain insight into student environmental dispositions, participant observers recorded student comments and behaviors throughout field trips. A survey, administered Pre-Treatment, Post-Treatment 1 and Post-Treatment 2, focused on family water-related behaviors and student perceptions of the need for local government water protection. The findings demonstrated both field trips increased content knowledge significantly, with large effect size. Content knowledge gain from one experience transferred to and was augmented by the second experience. Skill gain (technical and observational) varied by type of field trip and did not transfer. Technical skill was often paired with critical thinking/reasoning. Survey results demonstrated that the virtual-nature, in-nature order evinced a greater proenvironmental attitude and behavioral change. The initial experience provided greater proenvironmental impact, regardless of order. Several students exhibited a Connection to Life Experience that reinforced their nature-relatedness during either field trip. These findings inform best practices associated with environmental education. The implications include teacher-practitioner collaboration with IT personnel, naturalists, hydrologists, zoological and botanical experts, to design local, site-based virtual-nature and in-nature (or hybrid) field trips to nurture environmental literacy goals.

New Skills, New Jobs: Return Migration, Skill Transfers, and Business Formation in Mexico

PubMed Central

Wassink, Joshua

2017-01-01

Numerous studies have documented a high propensity for self-employment and business formation among return migrants relative to non-migrants. The literature points to the importance of remitted savings, migration duration, and number and types of jobs abroad for business formation upon return. Implicit in this scholarship is the assumption that migrants acquire not only financial capital, but also human capital, which expands their opportunities upon return. Empirical work has demonstrated how the transfer of formal human capital, such as language skills and professional credentials, influences the mobility pathways of professional return migrants. More recent research has also found that the transfer of informal human capital, such as social and technical skills learned on the job, shape the mobility pathways of return migrants with little schooling. Absent from this scholarship, however, are studies that directly test the relationship between the transfer of informal human capital and the odds of business formation among return migrants. In this paper, we address this gap. Using a multidimensional skills variable, which includes social, technical, and English language competences, we measure and test the relationship between skill acquisition and transfer and business formation among return migrants. Drawing on findings from a survey of 200 return migrants and 200 non-migrants in Mexico, we show that return migrants who successfully acquire and transfer new skills across the migratory circuit often leverage their new knowledge to launch businesses. Our findings have wide implications for how social scientists conceptualize and measure human capital formation across the migratory circuit. PMID:28316348

Spatial abilities and technical skills performance in health care: a systematic review.

PubMed

Langlois, Jean; Bellemare, Christian; Toulouse, Josée; Wells, George A

2015-11-01

The aim of this study was to conduct a systematic review and meta-analysis of the relationship between spatial abilities and technical skills performance in health care in beginners and to compare this relationship with those in intermediate and autonomous learners. Search criteria included 'spatial abilities' and 'technical skills'. Keywords related to these criteria were defined. A literature search was conducted to 20 December, 2013 in Scopus (including MEDLINE) and in several databases on EBSCOhost platforms (CINAHL Plus with Full Text, ERIC, Education Source and PsycINFO). Citations were obtained and reviewed by two independent reviewers. Articles related to retained citations were reviewed and a final list of eligible articles was determined. Articles were assessed for quality using the Scottish Intercollegiate Guidelines Network-50 assessment instrument. Data were extracted from articles in a systematic way. Correlations between spatial abilities test scores and technical skills performance were identified. A series of 8289 citations was obtained. Eighty articles were retained and fully reviewed, yielding 36 eligible articles. The systematic review found a tendency for spatial abilities to be negatively correlated with the duration of technical skills and positively correlated with the quality of technical skills performance in beginners and intermediate learners. Pooled correlations of studies were -0.46 (p = 0.03) and -0.38 (95% confidence interval [CI] -0.53 to -0.21) for duration and 0.33 (95% CI 0.20-0.44) and 0.41 (95% CI 0.26-0.54) for quality of technical skills performance in beginners and intermediate learners, respectively. However, correlations between spatial abilities test scores and technical skills performance were not statistically significant in autonomous learners. Spatial abilities are an important factor to consider in selecting and training individuals in technical skills in health care. © 2015 John Wiley & Sons Ltd.

Important Non-Technical Skills in Video-Assisted Thoracoscopic Surgery Lobectomy: Team Perspectives.

PubMed

Gjeraa, Kirsten; Mundt, Anna S; Spanager, Lene; Hansen, Henrik J; Konge, Lars; Petersen, René H; Østergaard, Doris

2017-07-01

Safety in the operating room is dependent on the team's non-technical skills. The importance of non-technical skills appears to be different for minimally invasive surgery as compared with open surgery. The aim of this study was to identify which non-technical skills are perceived by team members to be most important for patient safety, in the setting of video-assisted thoracoscopic surgery (VATS) lobectomy. This was an explorative, semistructured interview-based study with 21 participants from all four thoracic surgery centers in Denmark that perform VATS lobectomy. Data analysis was deductive, and directed content analysis was used to code the text into the Oxford Non-Technical Skills system for evaluating operating teams' non-technical skills. The most important non-technical skills described by the VATS teams were planning and preparation, situation awareness, problem solving, leadership, risk assessment, and teamwork. These non-technical skills enabled the team to achieve shared mental models, which in turn facilitated their efforts to anticipate next steps. This was viewed as important by the participants as they saw VATS lobectomy as a high-risk procedure with complementary and overlapping scopes of practice between surgical and anesthesia subteams. This study identified six non-technical skills that serve as the foundation for shared mental models of the patient, the current situation, and team resources. These findings contribute three important additions to the shared mental model construct: planning and preparation, risk assessment, and leadership. Shared mental models are crucial for patient safety because they enable VATS teams to anticipate problems through adaptive patterns of both implicit and explicit coordination. Copyright © 2017 The Society of Thoracic Surgeons. Published by Elsevier Inc. All rights reserved.

Customisation of an instrument to assess anaesthesiologists' non-technical skills.

PubMed

Jepsen, Rikke M H G; Spanager, Lene; Lyk-Jensen, Helle T; Dieckmann, Peter; Østergaard, Doris

2015-02-22

The objectives of the study were to identify Danish anaesthesiologists' non-technical skills and to customise the Scottish-developed Anaesthetists' Non-Technical Skills instrument for Danish anaesthesiologists. Six semi-structured group interviews were conducted with 31 operating room team members: anaes-thesiologists, nurse anaesthetists, surgeons, and scrub nurses. Interviews were transcribed verbatim and analysed using directed content analysis. Anaesthesiologists' non-technical skills were identified, coded, and sorted using the original instrument as a basis. The resulting prototype instrument was discussed with anaesthesiologists from 17 centres to ensure face validity. Interviews lasted 46-67 minutes. Identified examples of anaesthesiologists' good or poor non-technical skills fit the four categories in the original instrument: situation awareness; decision making; team working; and task management. Anaesthesiologists' leadership role in the operating room was emphasised: the original 'Task Management' category was named 'Leadership'. One new element, 'Demonstrating self-awareness' was added under the category 'Situation Awareness'. Compared with the original instrument, half of the behavioural markers were new, which reflected that being aware of and communicating one's own abilities to the team; working systematically; and speaking up to avoid adverse events were important skills. The Anaesthetists' Non-Technical Skills instrument was customised to a Danish setting using the identified non-technical skills for anaesthesiologists and the original instrument as basis. The customised instrument comprises four categories and 16 underpinning elements supported by multiple behavioural markers. Identifying non-technical skills through semi-structured group interviews and analysing them using direct content analysis proved a useful method for customising an assessment instrument to another setting.

The impact of nontechnical skills on technical performance in surgery: a systematic review.

PubMed

Hull, Louise; Arora, Sonal; Aggarwal, Rajesh; Darzi, Ara; Vincent, Charles; Sevdalis, Nick

2012-02-01

Failures in nontechnical and teamwork skills frequently lie at the heart of harm and near-misses in the operating room (OR). The purpose of this systematic review was to assess the impact of nontechnical skills on technical performance in surgery. MEDLINE, EMBASE, PsycINFO databases were searched, and 2,041 articles were identified. After limits were applied, 341 articles were retrieved for evaluation. Of these, 28 articles were accepted for this review. Data were extracted from the articles regarding sample population, study design and setting, measures of nontechnical skills and technical performance, study findings, and limitations. Of the 28 articles that met inclusion criteria, 21 articles assessed the impact of surgeons' nontechnical skills on their technical performance. The evidence suggests that receiving feedback and effectively coping with stressful events in the OR has a beneficial impact on certain aspects of technical performance. Conversely, increased levels of fatigue are associated with detriments to surgical skill. One article assessed the impact of anesthesiologists' nontechnical skills on anesthetic technical performance, finding a strong positive correlation between the 2 skill sets. Finally, 6 articles assessed the impact of multiple nontechnical skills of the entire OR team on surgical performance. A strong relationship between teamwork failure and technical error was empirically demonstrated in these studies. Evidence suggests that certain nontechnical aspects of performance can enhance or, if lacking, contribute to deterioration of surgeons' technical performance. The precise extent of this effect remains to be elucidated. Copyright © 2012 American College of Surgeons. Published by Elsevier Inc. All rights reserved.

Physics Department Accreditation: Preparing our physics students to enter the workforce

NASA Astrophysics Data System (ADS)

Svinarich, Kathryn

Most undergraduate physics majors enter the workforce after graduation instead of heading to graduate school. For most careers, it's clear that subject matter knowledge is not enough. Graduates must be able to effectively articulate that knowledge to multiple audiences at vastly different levels of technical expertise. Foreign language skills, global awareness, an entrepreneurial mindset, and knowledge of societal context are all important to employers today. These facets of workplace readiness are incorporated into learning outcomes at the heart of the ABET accreditation process. Through ABET accreditation, we are assuring employers that our applied physics graduates are achieving these outcomes and are better prepared for careers, both in and outside academia.

What makes a good LOFT scenario? Issues in advancing current knowledge of scenario design. [Line Oriented Flight Training

NASA Technical Reports Server (NTRS)

Gregorich, Steven E.

1991-01-01

An effort is made to ascertain which combinations of technical demands and crew coordination should be incorporated in training scenarios in order to maximize the effectiveness of training for crew members. Such high-fidelity simulation, which has come to be known as 'line-oriented flight training' or LOFT, involves the practice of both technical and crew coordination skills in a realistic setting, in conjunction with periodic reviews of performance via videotaped feedback. Attention is given to the integration of appropriate information, the measurement of objective task demands, the character of information from LOFT students, and the leeway allowed LOFT instructors.

TACT glossary: technology.

PubMed

Marcos, A

2010-01-01

The term technology is derived from the Greek words tékhne and lógos. Technique and technic(s) also come from tékhne. This Greek word and its Latin equivalent ars both belong to the same semantic field, referring primarily to a skill or practical process, a know-how and its products, be they objects or actions. Technology can, therefore, mean two things: i) either a scientific knowledge of tékhne or ii) a tékhne accompanied by science, that is, a know-how accompanied by a know-why. We shall normally understand technology to have this second meaning, as tékhne accompanied by or derived from science.

Non-technical skills of the operating theatre scrub nurse: literature review.

PubMed

Mitchell, Lucy; Flin, Rhona

2008-07-01

This paper is a report of a review to identify the non-technical (cognitive and social) skills used by scrub nurses. Recognition that failures in non-technical skills contributed to accidents in high-risk industries led to the development of research programmes to study the role of cognition and social interactions in operational safety. Recently, psychological research in operating theatres has revealed the importance of non-technical skills in safe and efficient performance. Most of the studies to date have focused on anaesthetists and surgeons. On-line sources and university library catalogues, publications of the Association for Perioperative Practice, National Association of Theatre Nurses and Association of Peri-Operative Registered Nurses were searched in 2007. Studies were included in the review if they presented data from scrub nurses on one or more of their non-technical skills. These findings were examined in relation to an existing medical non-technical skills framework with categories of communication, teamwork, leadership, situation awareness and decision-making. Of 424 publications retrieved, 13 were reviewed in detail. Ten concerned communication and eight of those also had data on teamwork. In 11 papers teamwork was examined, and one focused on nurses' situation awareness, teamwork and communication. None of the papers we reviewed examined leadership or decision-making by scrub nurses. Further work is needed to identify formally the non-technical skills which are important to the role of scrub nurse and then to design training in the identified non-technical skills during the education and development of scrub nurses.

Factors that influence the non-technical skills performance of scrub nurses: a prospective study.

PubMed

Kang, Evelyn; Massey, Debbie; Gillespie, Brigid M

2015-12-01

To identify and describe the factors that impact on the performance of scrub nurses' non-technical skills performance during the intra-operative phase of surgery. Non-technical skills have been identified as important precursors to errors in the operating room. However, few studies have investigated factors influencing non-technical skills of scrub nurses. Prospective observational study. Structured observations were performed on a sample of 182 surgical procedures across eight specialities by two trained observers from August 2012-April 2013 at two hospital sites. Participants were purposively selected scrub nurses. Bivariate correlations and a multiple linear regression model were used to identify associations among length of surgery, patients' acuity using the American Society of Anesthesiologists classification system, team familiarity, number of occasions scout nurses leave the operating room, change of scout nurse and the outcome, the non-technical skills performance of scrub nurses. Patient acuity and team familiarity were the strongest predictors of scrub nurses' non-technical skills performance at hospital site A. There were no correlations between the predictors and the performance of scrub nurses at hospital site B. A dedicated surgical team and patient acuity potentially influence the performance of scrub nurses' non-technical skills. Familiarity with team members foster advanced planning, thus minimizing distractions and interruptions that impact on scrub nurses' performance. Development of interventions aimed at improving non-technical skills has the potential to make a substantial difference and enhance patient care. © 2015 John Wiley & Sons Ltd.

An Alumni Assessment of MIS Related Job Skill Importance and Skill Gaps

ERIC Educational Resources Information Center

Wilkerson, Jerod W.

2012-01-01

This paper presents the results of a job skill survey of Management Information Systems (MIS) alumni from a Northeastern U.S. university. The study assesses job skill importance and skill gaps associated with 104 technical and non-technical skill items. Survey items were grouped into 6 categories based on prior research. Skill importance and skill…

The Relationship Between Technical Errors and Decision Making Skills in the Junior Resident

PubMed Central

Nathwani, J. N.; Fiers, R.M.; Ray, R.D.; Witt, A.K.; Law, K. E.; DiMarco, S.M.; Pugh, C.M.

2017-01-01

Objective The purpose of this study is to co-evaluate resident technical errors and decision-making capabilities during placement of a subclavian central venous catheter (CVC). We hypothesize that there will be significant correlations between scenario based decision making skills, and technical proficiency in central line insertion. We also predict residents will have problems in anticipating common difficulties and generating solutions associated with line placement. Design Participants were asked to insert a subclavian central line on a simulator. After completion, residents were presented with a real life patient photograph depicting CVC placement and asked to anticipate difficulties and generate solutions. Error rates were analyzed using chi-square tests and a 5% expected error rate. Correlations were sought by comparing technical errors and scenario based decision making. Setting This study was carried out at seven tertiary care centers. Participants Study participants (N=46) consisted of largely first year research residents that could be followed longitudinally. Second year research and clinical residents were not excluded. Results Six checklist errors were committed more often than anticipated. Residents performed an average of 1.9 errors, significantly more than the 1 error, at most, per person expected (t(44)=3.82, p<.001). The most common error was performance of the procedure steps in the wrong order (28.5%, P<.001). Some of the residents (24%) had no errors, 30% committed one error, and 46 % committed more than one error. The number of technical errors committed negatively correlated with the total number of commonly identified difficulties and generated solutions (r(33)= −.429, p=.021, r(33)= −.383, p=.044 respectively). Conclusions Almost half of the surgical residents committed multiple errors while performing subclavian CVC placement. The correlation between technical errors and decision making skills suggests a critical need to train residents in both technique and error management. ACGME Competencies Medical Knowledge, Practice Based Learning and Improvement, Systems Based Practice PMID:27671618

NASA/DOD Aerospace Knowledge Diffusion Research Project. Paper 54: The technical communications practices of engineering technology students: Results of the NASA/DOD Aerospace Knowledge Diffusion Research Project phase 3 student surveys

NASA Technical Reports Server (NTRS)

Pinelli, Thomas E.; England, Mark; Barclay, Rebecca O.; Kennedy, John M.

1995-01-01

Engineering technology programs are characterized by their focus on application and practice, and by their approximately 50/50 mix of theory and laboratory experience. Engineering technology graduates are employed across the technological spectrum and are often found in areas that deal with application, implementation, and production. Yet we know very little about the communications practices and information-use skills of engineering technology students. In this paper, we report selected results of an exploratory study of engineering technology students enrolled in three U.S. institutions of higher education. Data are presented for the following topics: career goals and aspirations; the importance of, receipt of, and helpfulness of communications and information-use skills instruction; collaborative writing; use of libraries; and the use of electronic (computer) networks.

Teaching Standard Deviation by Building from Student Invention

NASA Astrophysics Data System (ADS)

Day, James; Nakahara, Hiroko; Bonn, Doug

2010-11-01

First-year physics laboratories are often driven by a mix of goals that includes the illustration or discovery of basic physics principles and a myriad of technical skills involving specific equipment, data analysis, and report writing. The sheer number of such goals seems guaranteed to produce cognitive overload, even when highly detailed "cookbook" instructions are given. Recent studies indicate that this approach leaves students with a poor conceptual understanding of one of the most important features of laboratory physics and of the real world of science, in general: the development of an understanding of the nature of measurement and its attendant uncertainty . While students might be able to reproduce certain technical manipulations of data, as novice thinkers they lack the mental scaffolding that allows an expert to organize and apply this knowledge.2,3 Our goal is to put novices on the path to expertise, so that they will be able to transfer their knowledge to novel situations.

Leadership Skills among Technical and Vocational Educators

ERIC Educational Resources Information Center

Zakaria, Nurazyan Zahidah; Jizat, Nor Atikah Md.; Zakaria, Normah

2015-01-01

The purpose of leadership skills among technical and vocational educator are to prepare them towards effective organization. Effective leadership is widely accepted as being a key constituent in achieving organization improvement and to examine. This study aimed to gauge the leadership skills among technical and vocational educators effectiveness…

Technical Health Training Manual. Volume 1. Training for Development. Peace Corps Information Collection & Exchange Training Manual No. T-35a.

ERIC Educational Resources Information Center

Clark, Mari; And Others

This manual is designed as a resource for trainers who provide preservice training, either in-country or state-side, to health specialists and generalists assigned to health projects at the community and clinical levels. The training is intended to assist the volunteer in developing knowledge and skill in the areas of primary health care and the…

Bringing Together Mentoring, Technology, and Whole-School Reform: A First Look at the iMentor College Ready Program. Technical Appendices

ERIC Educational Resources Information Center

Merrill, Lisa; Siman, Nina; Wulach, Suzanne; Kang, David

2015-01-01

iMentor's College Ready Program is a unique approach that combines elements of school-based mentoring, whole school reform, and technology in an effort to help students develop the full suite of knowledge, behaviors, and skills they need to complete high school and enroll and thrive in college. iMentor partners with high schools that serve…

Technical Health Training Manual. Volume 2. Training for Development. Peace Corps Information Collection & Exchange Training Manual No. T-35a.

ERIC Educational Resources Information Center

Clark, Mari; And Others

This manual is designed as a resource for trainers who provide preservice training, either in-country or state-side, to health specialists and generalists assigned to health projects at the community and clinical levels. The training is intended to assist the volunteer in developing knowledge and skill in the areas of primary health care and the…

Total Quality Leadership Knowledge, Skills, and Abilities for Surface Warfare Officers

DTIC Science & Technology

1994-03-01

Leadership Management Training (LMT), continued. The senior enlisted and junior officers received the training, though the course content differed...designed blueprint for the development of the 9 Leadership , Management , Education, and Training program (LMET). (Ref. 6: p. 201] In 1976, the Navy...placing a greater emphasis on leadership , management , and HRM and down-playing the role of technical training. This continuum would consolidate the more

A Framework for Advancing Career and Technical Education: Recommendations for the Reauthorization of the Carl D. Perkins Act. Policy Brief

ERIC Educational Resources Information Center

Alliance for Excellent Education, 2012

2012-01-01

The nation's economy is only as strong as the educational foundation that supports it. Economic success in the twenty-first century requires a labor force capable of demonstrating an advanced level of both knowledge and skill. To be a true engine of growth, the nation's education system must be aligned with these demands. This is why the…

Teaching Materials to Enhance the Visual Expression of Web Pages for Students Not in Art or Design Majors

ERIC Educational Resources Information Center

Ariga, T.; Watanabe, T.

2008-01-01

The explosive growth of the Internet has made the knowledge and skills for creating Web pages into general subjects that all students should learn. It is now common to teach the technical side of the production of Web pages and many teaching materials have been developed. However teaching the aesthetic side of Web page design has been neglected,…

AN EIGHT WEEK SEMINAR IN AN INTRODUCTION TO NUMERICAL CONTROL ON TWO- AND THREE-AXIS MACHINE TOOLS FOR VOCATIONAL AND TECHNICAL MACHINE TOOL INSTRUCTORS. FINAL REPORT.

ERIC Educational Resources Information Center

BOLDT, MILTON; POKORNY, HARRY

THIRTY-THREE MACHINE SHOP INSTRUCTORS FROM 17 STATES PARTICIPATED IN AN 8-WEEK SEMINAR TO DEVELOP THE SKILLS AND KNOWLEDGE ESSENTIAL FOR TEACHING THE OPERATION OF NUMERICALLY CONTROLLED MACHINE TOOLS. THE SEMINAR WAS GIVEN FROM JUNE 20 TO AUGUST 12, 1966, WITH COLLEGE CREDIT AVAILABLE THROUGH STOUT STATE UNIVERSITY. THE PARTICIPANTS COMPLETED AN…

76 FR 24917 - Notice of Funding Opportunity and Solicitation for Grant Applications (SGA) for H-1B Technical...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-05-03

... Solicitation for Grant Applications (SGA) for H-1B Technical Skills Training Grants AGENCY: Employment and... million in funds for an H-1B Technical Skills Training Grants program. This grant program is designed to... training. H-1B technical skills training grants are financed by a user fee paid by employers to bring...

Innovation strategies for generic drug companies: moving into supergenerics.

PubMed

Ross, Malcolm S F

2010-04-01

Pharmaceutical companies that market generic products generally are not regarded as innovators, but rather as companies that produce copies of originator products to be launched at patent expiration. However, many generics companies have developed excellent scientific innovative skills in an effort to circumvent the defense patents of originator companies. More patents per product, in terms of both drug substances (process patents and polymorph patents) and formulations, are issued to generics companies than to companies that are traditionally considered to be 'innovators'. This quantity of issued patents highlights the technical knowledge and skill sets that are available in generics companies. In order to adopt a completely innovative model (ie, the development of NCEs), a generics company would require a completely new set of skills in several fields, including a sufficient knowledge base, project and risk management experience, and capability for clinical data evaluation. However, with relatively little investment, generics companies should be able to progress into the so-called 'supergeneric' drug space - an area of innovation that reflects the existing competencies of both innovative and generics companies.

NASA/DOD Aerospace Knowledge Diffusion Research Project. Paper 46: Technical communications in aerospace: A comparison across four countries

NASA Technical Reports Server (NTRS)

Kennedy, John M.; Pinelli, Thomas E.; Hecht, Laura Frye; Barclay, Rebecca O.

1995-01-01

In this paper we describe the preliminary analysis of four groups of aerospace engineering and science students -- student members of the American Institute of Aeronautics and Astronautics (AIAA) and students from universities in Japan, Russia, and Great Britain. We compare: (1) the demographic characteristics of the students; (2) factors that affected their career decision; (3) their career goals and aspirations; (4) their training in technical communication; and (5) their training in techniques for finding and using aerospace scientific and technical information (STI). Many employers in the US aerospace industry think there is a need for increased training of engineering students in technical communication. Engineers in the US and other countries believe that technical communication skills are critical for engineers' professional success. All students in our study agree about the importance of technical communication training for professional success, yet relatively few are happy with the instruction they receive. Overall, we conclude that additional instruction in technical communication and accessing STI would make it easier for students to achieve their career goals.

Development of technical skills in Electrical Power Engineering students: A case study of Power Electronics as a Key Course

NASA Astrophysics Data System (ADS)

Hussain, I. S.; Azlee Hamid, Fazrena

2017-08-01

Technical skills are one of the attributes, an engineering student must attain by the time of graduation, as per recommended by Engineering Accreditation Council (EAC). This paper describes the development of technical skills, Programme Outcome (PO) number 5, in students taking the Bachelor of Electrical Power Engineering (BEPE) programme in Universiti Tenaga Nasional (UNITEN). Seven courses are identified to address the technical skills development. The course outcomes (CO) of the courses are designed to instill the relevant technical skills with suitable laboratory activities. Formative and summative assessments are carried out to gauge students’ acquisition of the skills. Finally, to measure the attainment of the technical skills, key course concept is used. The concept has been implemented since 2013, focusing on improvement of the programme instead of the cohort. From the PO attainment analysis method, three different levels of PO attainment can be calculated: from the programme level, down to the course and student levels. In this paper, the attainment of the courses mapped to PO5 is measured. It is shown that Power Electronics course, which is the key course for PO5, has a strong attainment at above 90%. PO5 of other six courses are also achieved. As a conclusion, by embracing outcome-based education (OBE), the BEPE programme has a sound method to develop technical psychomotor skills in the degree students.

The Skills that Technical Communicators Need: An Investigation of Technical Communication Graduates, Managers, and Curricula

ERIC Educational Resources Information Center

Whiteside, Aimee L.

2003-01-01

This study examines the skills that recent technical communication graduates and managers believe technical communication students need before entering business and industry as new technical communicators. Through questionnaires and interviews with recent graduates and managers of technical communication departments as well as an analysis of the…

Expectations of Graduate Communication Skills in Professional Veterinary Practice.

PubMed

Haldane, Sarah; Hinchcliff, Kenneth; Mansell, Peter; Baik, Chi

Good communication skills are an important entry-level attribute of graduates of professional degrees. The inclusion of communication training within the curriculum can be problematic, particularly in programs with a high content load, such as veterinary science. This study examined the differences between the perceptions of students and qualified veterinarians with regards to the entry-level communication skills required of new graduates in clinical practice. Surveys were distributed to students in each of the four year levels of the veterinary science degree at the University of Melbourne and to recent graduates and experienced veterinarians registered in Victoria, Australia. Respondents were asked to rank the relative importance of six different skill sets: knowledge base; medical and technical skills; surgical skills; verbal communication and interpersonal skills; written communication skills; and critical thinking and problem solving. They were then asked to rate the importance of specific communication skills for new graduate veterinarians. Veterinarians and students ranked verbal communication and interpersonal skills as the most important skill set for an entry-level veterinarian. Veterinarians considered many new graduates to be deficient in these skills. Students often felt they lacked confidence in this area. This has important implications for veterinary educators in terms of managing the expectations of students and improving the delivery of communication skills courses within the veterinary curriculum.

Undergraduate basic surgical skills education: impact on attitudes to a career in surgery and surgical skills acquisition.

PubMed

McAnena, P F; O'Halloran, N; Moloney, B M; Courtney, D; Waldron, R M; Flaherty, G; Kerin, M J

2018-05-01

Basic surgical skills modules in medical education are effective in teaching skills and increasing confidence among students approaching surgery. However, these modules are not delivered universally and their effect on the professional development of graduates has not been established. We aimed to assess the impact of a 10-week basic surgical skills module on attitudes and technical skills of first year medical students compared to interns. Eighteen students participated and were assessed using a 4-part questionnaire. Technical skills were assessed by observing students perform a basic interrupted suture, using the objective structured assessment of technical skills (OSATS) tool. Fourteen interns were recruited. Students were more confident in surgical scrubbing (mean score 4.0 vs. 2.86, p = 0.001), and performing a basic suture (4.05 vs. 1.93, p = 0.000), more enthusiastic about assisting with an operation (4.5 vs. 3.0, p = 0.001) and more likely to consider a career in surgery (4.16 vs. 2.28, p = 0.000). Technical skills were greater in the student group (mean score 30.8 vs. 19.6, p = 0.001). Five interns had taken part in surgical skills modules as undergraduates. Their technical skills were significantly higher compared to interns who had not (n = 9) (28.8 vs. 14.5, p = 0.006), and they were more likely to consider a career in surgery (3.6 vs. 1.5, p = 0.036). The introduction of surgical skills teaching to the undergraduate medical curriculum has a positive impact on students' attitudes towards surgery and accelerates basic technical skills development. Consideration should be given to development of a standardised undergraduate core curriculum in basic surgical skills teaching.

A Perkins Challenge: Assessing Technical Skills in CTE

ERIC Educational Resources Information Center

Stone, James R., III

2009-01-01

Federal law requires state to develop performance measures and data-collection systems for secondary and postsecondary technical-skill attainment. This poses many challenges, such as defining a technical skills, measurement and when to assess students. In this article, the author outlines various assessment models and looks at the challenges…

Non-Technical Skill Gaps in Australian Business Graduates

ERIC Educational Resources Information Center

Jackson, Denise; Chapman, Elaine

2012-01-01

Purpose: The need for "job-ready" graduates has catalysed the development of non-technical skills in higher education institutions worldwide. Continued criticism of business school outcomes has provoked this examination of non-technical skill deficiencies in Australian business graduates. The purpose of this paper is to compare findings…

A Taxonomy of Technical Assistance Skills.

ERIC Educational Resources Information Center

Ogden, Evelyn; Musumeci, Marilyn

To operationalize the Technical Assistance Brokerage System, the first major task called for the development of a taxonomy of training and technical assistance services specifying requisite skills and skill clusters by the dimensions of client type, stages of dissemination, and levels of experience. From a literature search approximately 400…

Non-technical skills evaluation in the critical care air ambulance environment: introduction of an adapted rating instrument--an observational study.

PubMed

Myers, Julia A; Powell, David M C; Psirides, Alex; Hathaway, Karyn; Aldington, Sarah; Haney, Michael F

2016-03-08

In the isolated and dynamic health-care setting of critical care air ambulance transport, the quality of clinical care is strongly influenced by non-technical skills such as anticipating, recognising and understanding, decision making, and teamwork. However there are no published reports identifying or applying a non-technical skills framework specific to an intensive care air ambulance setting. The objective of this study was to adapt and evaluate a non-technical skills rating framework for the air ambulance clinical environment. In the first phase of the project the anaesthetists' non-technical skills (ANTS) framework was adapted to the air ambulance setting, using data collected directly from clinician groups, published literature, and field observation. In the second phase experienced and inexperienced inter-hospital transport clinicians completed a simulated critical care air transport scenario, and their non-technical skills performance was independently rated by two blinded assessors. Observed and self-rated general clinical performance ratings were also collected. Rank-based statistical tests were used to examine differences in the performance of experienced and inexperienced clinicians, and relationships between different assessment approaches and assessors. The framework developed during phase one was referred to as an aeromedical non-technical skills framework, or AeroNOTS. During phase two 16 physicians from speciality training programmes in intensive care, emergency medicine and anaesthesia took part in the clinical simulation study. Clinicians with inter-hospital transport experience performed more highly than those without experience, according to both AeroNOTS non-technical skills ratings (p = 0.001) and general performance ratings (p = 0.003). Self-ratings did not distinguish experienced from inexperienced transport clinicians (p = 0.32) and were not strongly associated with either observed general performance (r(s) = 0.4, p = 0.11) or observed non-technical skills performance (r(s) = 0.4, p = 0.1). This study describes a framework which characterises the non-technical skills required by critical care air ambulance clinicians, and distinguishes higher and lower levels of performance. The AeroNOTS framework could be used to facilitate education and training in non-technical skills for air ambulance clinicians, and further evaluation of this rating system is merited.

Improving Surgical Safety and Nontechnical Skills in Variable-Resource Contexts: A Novel Educational Curriculum.

PubMed

Lin, Yihan; Scott, John W; Yi, Sojung; Taylor, Kathryn K; Ntakiyiruta, Georges; Ntirenganya, Faustin; Banguti, Paulin; Yule, Steven; Riviello, Robert

2017-10-23

A substantial proportion of adverse intraoperative events are attributed to failures in nontechnical skills. To strengthen these skills and improve surgical safety, the Non-Technical Skills for Surgeons (NOTSS) taxonomy was developed as a common framework. The NOTSS taxonomy was adapted for low- and middle-income countries, where variable resources pose a significant challenge to safe surgery. The NOTSS for variable-resource contexts (VRC) curriculum was developed and implemented in Rwanda, with the aim of enhancing knowledge and attitudes about nontechnical skills and promoting surgical safety. The NOTSS-VRC curriculum was developed through a rigorous process of integrating contextually appropriate values. It was implemented as a 1-day training course for surgical and anesthesia postgraduate trainees. The curriculum comprises lectures, videos, and group discussions. A pretraining and posttraining questionnaire was administered to compare knowledge and attitudes regarding nontechnical skills, and their potential to improve surgical safety. The setting of this study was in the tertiary teaching hospital of Kigali, Rwanda. Participants were residents of the University of Kigali. A total of 55 residents participated from general surgery (31.4%), obstetrics (25.5%), anesthesia (17.6%), and other surgical specialties (25.5%). In a paired analysis, understanding of NOTSS improved significantly (55.6% precourse, 80.9% postcourse, p<0.01). All residents reported that the course would improve their ability to provide safer patient care, and 97.4% believed developing nontechnical skills would improve patient outcomes. Nontechnical skills must be highlighted in surgical training in low- and middle-income countries. The NOTSS-VRC curriculum can be implemented without additional technology or significant financial cost. Its deliberate design for resource-constrained settings allows it to be used both as an educational course and a quality improvement strategy. Our research demonstrates it is feasible to improve knowledge and attitudes about NOTSS through a 1-day course, and represents a novel approach to improving global surgical safety. Copyright © 2017 The Authors. Published by Elsevier Inc. All rights reserved.

Culture in great apes: using intricate complexity in feeding skills to trace the evolutionary origin of human technical prowess.

PubMed

Byrne, Richard W

2007-04-29

Geographical cataloguing of traits, as used in human ethnography, has led to the description of 'culture' in some non-human great apes. Culture, in these terms, is detected as a pattern of local ignorance resulting from environmental constraints on knowledge transmission. However, in many cases, the geographical variations may alternatively be explained by ecology. Social transmission of information can reliably be identified in many other animal species, by experiment or distinctive patterns in distribution; but the excitement of detecting culture in great apes derives from the possibility of understanding the evolution of cumulative technological culture in humans. Given this interest, I argue that great ape research should concentrate on technically complex behaviour patterns that are ubiquitous within a local population; in these cases, a wholly non-social ontogeny is highly unlikely. From this perspective, cultural transmission has an important role in the elaborate feeding skills of all species of great ape, in conveying the 'gist' or organization of skills. In contrast, social learning is unlikely to be responsible for local stylistic differences, which are apt to reflect sensitive adaptations to ecology.

Gauging Skills of Hospital Security Personnel: a Statistically-driven, Questionnaire-based Approach.

PubMed

Rinkoo, Arvind Vashishta; Mishra, Shubhra; Rahesuddin; Nabi, Tauqeer; Chandra, Vidha; Chandra, Hem

2013-01-01

This study aims to gauge the technical and soft skills of the hospital security personnel so as to enable prioritization of their training needs. A cross sectional questionnaire based study was conducted in December 2011. Two separate predesigned and pretested questionnaires were used for gauging soft skills and technical skills of the security personnel. Extensive statistical analysis, including Multivariate Analysis (Pillai-Bartlett trace along with Multi-factorial ANOVA) and Post-hoc Tests (Bonferroni Test) was applied. The 143 participants performed better on the soft skills front with an average score of 6.43 and standard deviation of 1.40. The average technical skills score was 5.09 with a standard deviation of 1.44. The study avowed a need for formal hands on training with greater emphasis on technical skills. Multivariate analysis of the available data further helped in identifying 20 security personnel who should be prioritized for soft skills training and a group of 36 security personnel who should receive maximum attention during technical skills training. This statistically driven approach can be used as a prototype by healthcare delivery institutions worldwide, after situation specific customizations, to identify the training needs of any category of healthcare staff.

Gauging Skills of Hospital Security Personnel: a Statistically-driven, Questionnaire-based Approach

PubMed Central

Rinkoo, Arvind Vashishta; Mishra, Shubhra; Rahesuddin; Nabi, Tauqeer; Chandra, Vidha; Chandra, Hem

2013-01-01

Objectives This study aims to gauge the technical and soft skills of the hospital security personnel so as to enable prioritization of their training needs. Methodology A cross sectional questionnaire based study was conducted in December 2011. Two separate predesigned and pretested questionnaires were used for gauging soft skills and technical skills of the security personnel. Extensive statistical analysis, including Multivariate Analysis (Pillai-Bartlett trace along with Multi-factorial ANOVA) and Post-hoc Tests (Bonferroni Test) was applied. Results The 143 participants performed better on the soft skills front with an average score of 6.43 and standard deviation of 1.40. The average technical skills score was 5.09 with a standard deviation of 1.44. The study avowed a need for formal hands on training with greater emphasis on technical skills. Multivariate analysis of the available data further helped in identifying 20 security personnel who should be prioritized for soft skills training and a group of 36 security personnel who should receive maximum attention during technical skills training. Conclusion This statistically driven approach can be used as a prototype by healthcare delivery institutions worldwide, after situation specific customizations, to identify the training needs of any category of healthcare staff. PMID:23559904

Does teaching non-technical skills to medical students improve those skills and simulated patient outcome?

PubMed

Hagemann, Vera; Herbstreit, Frank; Kehren, Clemens; Chittamadathil, Jilson; Wolfertz, Sandra; Dirkmann, Daniel; Kluge, Annette; Peters, Jürgen

2017-03-29

The purpose of this study is to evaluate the effects of a tailor-made, non-technical skills seminar on medical student's behaviour, attitudes, and performance during simulated patient treatment. Seventy-seven students were randomized to either a non-technical skills seminar (NTS group, n=43) or a medical seminar (control group, n=34). The human patient simulation was used as an evaluation tool. Before the seminars, all students performed the same simulated emergency scenario to provide baseline measurements. After the seminars, all students were exposed to a second scenario, and behavioural markers for evaluating their non-technical skills were rated. Furthermore, teamwork-relevant attitudes were measured before and after the scenarios, and perceived stress was measured following each simulation. All simulations were also evaluated for various medical endpoints. Non-technical skills concerning situation awareness (p<.01, r=0.5) and teamwork (p<.01, r=0.45) improved from simulation I to II in the NTS group. Decision making improved in both groups (NTS: p<.01, r=0.39; control: p<.01, r=0.46). The attitude 'handling errors' improved significantly in the NTS group (p<.05, r=0.34). Perceived stress decreased from simulation I to II in both groups. Medical endpoints and patients´ outcome did not differ significantly between the groups in simulation II. This study highlights the effectiveness of a single brief seminar on non-technical skills to improve student's non-technical skills. In a next step, to improve student's handling of emergencies and patient outcomes, non-technical skills seminars should be accompanied by exercises and more broadly embedded in the medical school curriculum.

Up to the Challenge: The Role of Career and Technical Education and 21st Century Skills in College and Career Readiness

ERIC Educational Resources Information Center

Partnership for 21st Century Skills, 2010

2010-01-01

This report highlights the demand for skills in the global economy and the ways in which educators can meet this demand by drawing on both career and technical education and the Partnership for 21st Century Skills' Framework for 21st Century Learning. Twenty-first century skills and career and technical education are essential in every state,…

Tools don't-and won't-make the man: A cognitive look at the future.

PubMed

Osiurak, François; Navarro, Jordan; Reynaud, Emanuelle; Thomas, Gauthier

2018-05-01

The question of whether tools erase cognitive and physical interindividual differences has been surprisingly overlooked in the literature. Yet if technology is profusely available in a near or far future, will we be equal in our capacity to use it? We sought to address this unexplored, fundamental issue, asking 200 participants to perform 3 physical (e.g., fine manipulation) and 3 cognitive tasks (e.g., calculation) in both non-tool-use and tool-use conditions. Here we show that tools do not erase but rather extend our intrinsic physical and cognitive skills. Moreover, this phenomenon of extension is task specific because we found no evidence for superusers, benefitting from the use of a tool irrespective of the task concerned. These results challenge the possibility that technical solutions could always be found to make people equal. Rather, technical innovation might be systematically limited by the user's initial degree of knowledge or skills for a given task. (PsycINFO Database Record (c) 2018 APA, all rights reserved).

Collective and experimental research project for master's students on the pathophysiology of obesity.

PubMed

Bourlier, Virginie; Conte, Caroline; Denis, Colette; Dray, Cédric; Guillou, Pascale; Belliure, Manuela; Lorsignol, Anne; Noël, Marion; Buffin-Meyer, Bénédicte

2017-12-01

We describe here a collective and experimental research project-based learning (ERPBL) for master's students that can be used to illustrate some basic concepts on glucose/lipid homeostasis and renal function around a topical issue. The primary objective of this ERPBL was to strengthen students' knowledge and understanding of physiology and pathophysiology. The secondary objectives were to help students to develop technical/practical abilities and acquire transversal skills with real-world connections. Obesity is a worldwide public health problem that increases the risk for developing type 2 diabetes and nephropathies. To study the impact of western dietary habits, students evaluated the effects of a diet enriched with fat and cola [high-fat and cola diet (HFCD)] on metabolism and renal function in mice. Students mainly worked in tandem to prepare and perform experiments, but also collectively to compile, analyze, and discuss data. Students showed that HFCD-fed mice 1 ) developed obesity; 2 ) exhibited glucose homeostasis impairments associated to ectopic fat storage; and 3 ) displayed reduced glomerular filtration. The educational benefit of the program was estimated using three evaluation metrics: a conventional multicriteria assessment by teachers, a pre-/posttest, and a self-evaluation questionnaire. They showed that the current approach successfully strengthened scientific student knowledge and understanding of physiology/pathophysiology. In addition, it helped students develop new skills, such as technical and transversal skills. We concluded that this ERPBL dealing with the pathophysiology of obesity was strongly beneficial for master's students, thereby appearing as an efficient and performing educational tool. Copyright © 2017 the American Physiological Society.

Enhancing Non-Technical Skills by a Multidisciplinary Engineering Summer School

ERIC Educational Resources Information Center

Larsen, Peter Gorm; Kristiansen, Erik Lasse; Bennedsen, Jens; Bjerge, Kim

2017-01-01

In general engineering studies focus on the technical skills in their own discipline. However, in their subsequent industrial careers, a significant portion of their time needs to be devoted to non-technical skills. In addition, in an increasingly globalised world collaboration in teams across cultures and disciplines is paramount to the creation…

The assessment of surgical skills as a complement to the training method. Revision.

PubMed

Sánchez-Fernández, J; Bachiller-Burgos, J; Serrano-Pascual, Á; Cózar-Olmo, J M; Díaz-Güemes Martín-Portugués, I; Pérez-Duarte, F J; Hernández-Hurtado, L; Álvarez-Ossorio, J L; Sánchez-Margallo, F M

2016-01-01

The acquisition and improvement of surgical skills constitute a fundamental element in the training of any practitioner. At present, however, the assessment of these skills is a scarcely developed area of research. The aim of this study was to analyse the peculiarities of the various assessment systems and establish the minimum criteria that a skills and knowledge assessment system should meet as a method for assessing surgical skills in urological surgery. Scientific literature review aimed at the various currently available assessment systems for skills and competencies (technical and nontechnical), with a special focus on the systematic reviews and prospective studies. After conducting the review, we found that the various assessment systems for surgical competence have, in our opinion, a number of shortcomings. There is a certain degree of subjectivity in the assessment of surgeons by the evaluators. The assessment of nontechnical competencies is not formally recorded. There is no description of a follow-up assessment or any basic parameters associated with healthcare quality. There is no registration of associated competencies associated with the various surgical techniques. There is also no ranking of these competencies and the specific peculiarities for their application. We believe that the development of a new assessment system for surgical competencies (technical and nontechnical) aimed at assessing urologists in the various surgical techniques is necessary. To this end, our team has worked on developing the Evaluation System for Surgical Competencies on Laparoscopy, which is based on the definition, ranking and assessment of competencies demonstrated by surgeons. Copyright © 2015 AEU. Publicado por Elsevier España, S.L.U. All rights reserved.

Skill, Judgement and Conduct for the First Generation of Neurosurgeons, 1900-1930.

PubMed

Gavrus, Delia

2015-07-01

Historical contingency complicates a reading of skill as a self-explanatory and always positive attribute. By focusing on the attempts of the first generation of neurosurgeons to build a community and fashion a collective neurosurgical self, this article highlights the extent to which the relationship between surgical skill and professional judgement is reflected in broader concerns that shape the landscape of medicine at a given time. Some early twentieth-century surgeons expressed concern about the spectacularisation of surgery and the skilful but problematic work of 'brilliant operators'. The neurosurgeons' policies of inclusion and exclusion show that in the process of fashioning a neurosurgical persona, this first generation sanctioned specific norms of conduct underwritten by similar moral imperatives, such as self-control. These norms governed the doctors' work both in the operating room and on the public stage (in their engagement with the press). The meetings of the first neurosurgical society staged a critical encounter between the host neurosurgeon and the members who watched him perform surgery. These technical performances in the operating theatre, followed by discussions, were designed to encourage particular norms, to negotiate surgical knowledge, and to demonstrate the skills and character of the neurosurgeon. The performances acted as a technology of the self that aligned the operator to a community and helped that community refine its norms of surgical conduct. The awkward surgeon with inferior technical ability was preferable to the brilliant but vain operator who lacked the capacity to judge when he should not deploy his spectacular skills.

Training considerations for the intracoelomic implantation of electronic tags in fish with a summary of common surgical errors

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cooke, Steven J.; Wagner, Glenn N.; Brown, Richard S.

2011-01-01

Training is a fundamental part of all scientific and technical disciplines. This is particularly true for all types of surgeons. For surgical procedures, a number of skills are necessary to reduce mistakes. Trainees must learn an extensive yet standardized set of problem-solving and technical skills to handle challenges as they arise. There are currently no guidelines or consistent training methods for those intending to implant electronic tags in fish; this is surprising, considering documented cases of negative consequences of fish surgeries and information from studies having empirically tested fish surgical techniques. Learning how to do fish surgery once is insufficientmore » for ensuring the maintenance or improvement of surgical skill. Assessment of surgical skills is rarely incorporated into training, and is needed. Evaluation provides useful feedback that guides future learning, fosters habits of self-reflection and self-remediation, and promotes access to advanced training. Veterinary professionals should be involved in aspects of training to monitor basic surgical principles. We identified attributes related to knowledge, understanding, and skill that surgeons must demonstrate prior to performing fish surgery including a “hands-on” assessment using live fish. Included is a summary of common problems encountered by fish surgeons. We conclude by presenting core competencies that should be required as well as outlining a 3-day curriculum for training surgeons to conduct intracoelomic implantation of electronic tags. This curriculum could be offered through professional fisheries societies as professional development courses.« less

Design and Assessment of an Associate Degree-Level Plant Operations Technical Education Program

NASA Astrophysics Data System (ADS)

Selwitz, Jason Lawrence

Research was undertaken to develop and evaluate an associate degree-level technical education program in Plant Operations oriented towards training students in applied science, technology, engineering, and mathematics (STEM) skills and knowledge relevant to a spectrum of processing industries. This work focuses on four aspects of the curriculum and course development and evaluation research. First, the context of, and impetus for, what was formerly called vocational education, now referred to as technical or workforce education, is provided. Second, the research that was undertaken to design and evaluate an associate degree-level STEM workforce education program is described. Third, the adaptation of a student self-assessment of learning gains instrument is reviewed, and an analysis of the resulting data using an adapted logic model is provided, to evaluate the extent to which instructional approaches, in two process control/improvement-focused courses, were effective in meeting course-level intended learning outcomes. Finally, eight integrative multiscale exercises were designed from two example process systems, wastewater treatment and fast pyrolysis. The integrative exercises are intended for use as tools to accelerate the formation of an operator-technician's multiscale vision of systems, unit operations, underlying processes, and fundamental reactions relevant to multiple industries. Community and technical colleges serve a vital function in STEM education by training workers for medium- and high-skilled technical careers and providing employers the labor necessary to operate and maintain thriving business ventures. Through development of the curricular, course, and assessment-related instruments and tools, this research helps ensure associate degree-level technical education programs can engage in a continual process of program evaluation and improvement.

Defining the Key Competencies in Radiation Protection for Endovascular Procedures: A Multispecialty Delphi Consensus Study.

PubMed

Doyen, Bart; Maurel, Blandine; Cole, Jonathan; Maertens, Heidi; Mastracci, Tara; Van Herzeele, Isabelle

2018-02-01

Radiation protection training courses currently focus on broad knowledge topics which may not always be relevant in daily practice. The goal of this study was to determine the key competencies in radiation protection that every endovascular team member should possess and apply routinely, through multispecialty clinical content expert consensus. Consensus was obtained through a two round modified Delphi methodology. The expert panel consisted of European vascular surgeons, interventional radiologists, and interventional cardiologists/angiologists experienced in endovascular procedures. An initial list of statements, covering knowledge skills, technical skills and attitudes was created, based on a literature search. Additional statements could be suggested by the experts in the first Delphi round. Each of the statements had to be rated on a 5- point Likert scale. A statement was considered to be a key competency when the internal consistency was greater than alpha = 0.80 and at least 80% of the experts agreed (rating 4/5) or strongly agreed (rating 5/5) with the statement. Questionnaires were emailed to panel members using the Surveymonkey service. Forty-one of 65 (63.1%) invited experts agreed to participate in the study. The response rates were 36 out of 41 (87.8%): overall 38 out of 41(92.6%) in the first round and 36 out of 38 (94.7%) in the second round. The 71 primary statements were supplemented with nine items suggested by the panel. The results showed excellent consensus among responders (Cronbach's alpha = 0.937 first round; 0.958 s round). Experts achieved a consensus that 30 of 33 knowledge skills (90.9%), 23 of 27 technical skills (82.1%), and 15 of 20 attitudes (75.0%) should be considered as key competencies. A multispecialty European endovascular expert panel reached consensus about the key competencies in radiation protection. These results may serve to create practical and relevant radiation protection training courses in the future, enhancing radiation safety for both patients and the entire endovascular team. Copyright © 2017 European Society for Vascular Surgery. All rights reserved.

A survey-based cross-sectional study of doctors’ expectations and experiences of non-technical skills for Out of Hours work

PubMed Central

Brown, Michael; Shaw, Dominick; Sharples, Sarah; Jeune, Ivan Le; Blakey, John

2015-01-01

Objectives The skill set required for junior doctors to work efficiently and safely Out of Hours (OoH) in hospitals has not been established. This is despite the OoH period representing 75% of the year and it being the time of highest mortality. We set out to explore the expectations of medical students and experiences of junior doctors of the non-technical skills needed to work OoH. Design Survey-based cross-sectional study informed by focus groups. Setting Online survey with participants from five large teaching hospitals across the UK. Participants 300 Medical Students and Doctors Outcome measure Participants ranked the importance of non-technical skills, as identified by literature review and focus groups, needed for OoH care. Results The focus groups revealed a total of eight non-technical skills deemed to be important. In the survey ‘Task Prioritisation’ (mean rank 1.617) was consistently identified as the most important non-technical skill. Stage of training affected the ranking of skills, with significant differences for ‘Communication with Senior Doctors’, ‘Dealing with Clinical Isolation’, ‘Task Prioritisation’ and ‘Communication with Patients’. Importantly, there was a significant discrepancy between the medical student expectations and experiences of doctors undertaking work. Conclusions Our findings suggest that medical staff particularly value task prioritisation skills; however, these are not routinely taught in medical schools. The discrepancy between expectations of students and experience of doctors reinforces the idea that there is a gap in training. Doctors of different grades place different importance on specific non-technical skills with implications for postgraduate training. There is a pressing need for medical schools and deaneries to review non-technical training to include more than communication skills. PMID:25687899

A didactic and hands-on module enhances resident microsurgical knowledge and technical skill.

PubMed

El Ahmadieh, Tarek Y; Aoun, Salah G; El Tecle, Najib E; Nanney, Allan D; Daou, Marc R; Harrop, James; Batjer, Hunt H; Bendok, Bernard R

2013-10-01

Simulation has been adopted as a powerful training tool in many areas of health care. However, it has not yet been systematically embraced in neurosurgery because of the absence of validated tools, assessment scales, and curricula. To use our validated microanastomosis module and scale to evaluate the effects of an educational intervention on the performance of neurosurgery residents at the 2012 Congress of Neurological Surgeons Annual Meeting. The module consisted of an end-to-end microanastomosis of a 3-mm vessel and was divided into 3 phases: (1) a cognitive and microsuture prelecture testing phase, (2) a didactic lecture, and (3) a cognitive and microsuture postlecture testing phase. We compared resident knowledge and technical proficiency from the pretesting and posttesting phases. One neurosurgeon and 7 neurosurgery residents participated in the study. None had previous experience in microsurgery. The average score on the microsuture prelecture and postlecture tests, as measured by our assessment scale, was 32.50 and 39.75, respectively (P = .001). The number of completed sutures at the end of each procedure was higher for 75% of participants in the postlecture testing phase (P = .03). The average score on the cognitive postlecture test (12.75) was significantly better than that of the cognitive prelecture test (8.38; P = .001). Simulation has the potential to enhance resident education and to elevate proficiency levels. Our data suggest that a focused microsurgical module that incorporates a didactic component and a technical component can enhance resident knowledge and technical proficiency in microsurgical anastomosis.

Development and evaluation of a patient-centred measurement tool for surgeons' non-technical skills.

PubMed

Yule, J; Hill, K; Yule, S

2018-06-01

Non-technical skills are essential for safe and effective surgery. Several tools to assess surgeons' non-technical skills from the clinician's perspective have been developed. However, a reliable measurement tool using a patient-centred approach does not currently exist. The aim of this study was to translate the existing Non-Technical Skills for Surgeons (NOTSS) tool into a patient-centred evaluation tool. Data were gathered from four cohorts of patients using an iterative four-stage mixed-methods research design. Exploratory and confirmatory factor analyses were performed to establish the psychometric properties of the tool, focusing on validity, reliability, usability and parsimony. Some 534 patients were recruited to the study. A total of 24 patient-centred non-technical skill items were developed in stage 1, and reduced to nine items in stage 2 using exploratory factor analysis. In stage 3, confirmatory factor analysis demonstrated that these nine items each loaded on to one of three factors, with excellent internal consistency: decision-making, leadership, and communication and teamwork. In stage 4, validity testing established that the new tool was independent of physician empathy and predictive of surgical quality. Surgical leadership emerged as the most dominant skill that patients could recognize and evaluate. A novel nine-item assessment tool has been developed. The Patients' Evaluation of Non-Technical Skills (PENTS) tool allows valid and reliable measurement of surgeons' non-technical skills from the patient perspective. © 2018 BJS Society Ltd Published by John Wiley & Sons Ltd.

Dental Education Required for the Changing Health Care Environment.

PubMed

Fontana, Margherita; González-Cabezas, Carlos; de Peralta, Tracy; Johnsen, David C

2017-08-01

To be able to meet the demands for care in 2040, dental graduates will need to address challenges resulting from the rapidly changing health care environment with knowledge and sets of skills to build on current standards and adapt to the future. The purposes of this article are to 1) analyze key challenges likely to evolve considerably between now and 2040 that will impact dental education and practice and 2) propose several sets of skills and educational outcomes necessary to address these challenges. The challenges discussed include changes in prevalence of oral diseases, dental practice patterns, materials and technologies, integrated medical-dental care, role of electronic health records, cultural competence, integrated curricula, interprofessional education, specialty-general balance, and web/cloud-based collaborations. To meet these challenges, the dental graduate will need skills such as core knowledge in basic and clinical dentistry, technical proficiency, critical thinking skills for lifelong learning, ethical and professional values, ability to manage a practice, social responsibility, and ability to function in a collegial intra- and interprofessional setting. Beyond the skills of the individual dentist will be the need for leadership in academia and the practice community. Academic and professional leaders will need to engage key constituencies to develop strategic directions and agendas with all parties pointed toward high standards for individual patients and the public at large. This article was written as part of the project "Advancing Dental Education in the 21 st Century."

Instructional Alignment of Workplace Readiness Skills in Career and Technical Education

ERIC Educational Resources Information Center

Martin, Sarah Jane

2009-01-01

The United States faces a skills shortage that goes beyond academic and technical skills. Employers report entry-level workers lack the necessary "soft" skills, also referred to as workplace readiness skills, needed for success in the workforce; thus, calling on educational institutions to make improvements in high school curriculum in…

[Training program design of acupuncture and moxibustion manipulation techniques].

PubMed

Dong, Qin

2009-12-01

As an important component of acupuncture-moxibustion science, needling and moxibustion is one methodology and technology and its technical characteristics determine its special status and role in training programs. It is closely ralated to meridians-collaterals-acupoints and acupuncture treatment. Therefore, it demands an overall planning for acupuncture professional skills that consists of meridians-collaterals-acupoints knowledge and acupuncture treatment techniques. The practical training courses are the step by step progress involving repeated practices.

MANPOWER NEEDS AND EMPLOYMENT OPPORTUNITIES FOR WORKERS NEEDING KNOWLEDGE AND SKILL IN AGRICULTURE. TECHNICAL EDUCATION IN AND FOR RURAL AREAS, REPORT NUMBER 2.

ERIC Educational Resources Information Center

WARMBROD, J. ROBERT

THREE TYPES OF FIRMS IN A 14-COUNTY AREA WERE SURVEYED TO DETERMINE THE NUMBER OF WORKERS WITH AGRICULTURAL COMPETENCIES REQUIRED IN THE OFF-FARM AGRICULTURAL OCCUPATIONS AND TO COMPARE EMPLOYMENT OPPORTUNITIES IN FARM AND OFF-FARM AGRICULTURAL OCCUPATIONS. OF 77,868 WORKERS IN 384 FIRMS IN AREAS OF LESS THAN 25,000 POPULATION, 18 PERCENT WERE IN…

TECHNICIANS FOR THE HEALTH FIELD--A COMMUNITY COLLEGE HEALTH CAREERS STUDY PROGRAM. A FINAL REPORT ON PHASE I OF THE COMMUNITY COLLEGE HEALTH CAREERS PROJECT, OCTOBER 1, 1964 - MARCH 31, 1966.

ERIC Educational Resources Information Center

KINSINGER, ROBERT E.; RATNER, MURIEL

THIS REPORT OF THE COMPLETION OF PHASE I OF A FIVE-PHASE PROGRAM CONSISTS OF CURRICULUM GUIDELINES AND RECOMMENDATIONS FOR INSTRUCTOR TRAINING, BASED ON A STATEWIDE SURVEY IN NEW YORK. OBJECTIVES AND REQUIRED KNOWLEDGE, UNDERSTANDING, AND SKILLS ARE DESCRIBED FOR TECHNICAL EDUCATION IN X-RAY, INHALATION THERAPY, DENTAL AUXILIARY, MEDICAL RECORDS,…

New York City Goes to College: A First Look at Patterns of College Enrollment, Persistence, and Degree Attainment for NYC High School Students. Technical Appendices

ERIC Educational Resources Information Center

Coca, Vanessa

2014-01-01

Over the past 15 years, in New York City and across the country, expectations for high schools--and high school students--have changed dramatically. Increasingly, high schools are being asked not only to reduce dropout rates and boost graduation rates, but also to impart knowledge, skills, and experiences that will prepare students to succeed in…

The non-technical skills used by anaesthetic technicians in critical incidents reported to the Australian Incident Monitoring System between 2002 and 2008.

PubMed

Rutherford, J S; Flin, R; Irwin, A

2015-07-01

The outcome of critical incidents in the operating theatre has been shown to be influenced by the behaviour of anaesthetic technicians (ATs) assisting anaesthetists, but the specific non-technical skills involved have not been described. We performed a review of critical incidents (n=1433) reported to the Australian Incident Monitoring System between 2002 and 2008 to identify which non-technical skills were used by ATs. The reports were assessed if they mentioned anaesthetic assistance or had the boxes ticked to identify "inadequate assistance" or "absent supervision or assistance". A total of 90 critical incidents involving ATs were retrieved, 69 of which described their use of non-technical skills. In 20 reports, the ATs ameliorated the critical incident, whilst in 46 they exacerbated the critical incident, and three cases had both positive and negative non-technical skills described. Situation awareness was identified in 39 reports, task management in 23, teamwork in 21 and decision-making in two, but there were no descriptions of issues related to leadership, stress or fatigue management. Situation awareness, task management and teamwork appear to be important non-technical skills for ATs in the development or management of critical incidents in the operating theatre. This analysis has been used to support the development of a non-technical skills taxonomy for anaesthetic assistants.

Developing skills for youth in the 21st century: The role of elite International Baccalaureate Diploma Programme schools in China

NASA Astrophysics Data System (ADS)

Wright, Ewan; Lee, Moosung

2014-04-01

There is a growing body of research suggesting that schools need to respond to changing social and economic dynamics by prioritising "21st-century skills". Proponents of this view, who have been termed "the 21st century skills movement", have called for greater emphasis on cognitive and non-cognitive skills development, alongside the learning of subject content and technical skills. This paper explores the potential of International Baccalaureate Diploma Programme (IBDP) schools to respond to this mandate in China, one of the fastest-growing markets for International Baccalaureate® (IB) schools globally. The authors' research team undertook a multi-site case study of five elite IBDP schools in China. Their findings revealed confidence among interviewees that the IB educational philosophy was conducive to 21st-century skills development, especially through the provision of the three IBDP "Core Requirements", which are Creativity, Action, Service (CAS), Extended Essay (EE) and Theory of Knowledge (TOK). Despite this confidence, concerns remain about the implementation of the IB educational philosophy in the context of IBDP schools in China.

Enlarging the `knowledge toolbox': helping students prepare for an innovation-driven world

NASA Astrophysics Data System (ADS)

Nilsen, Elizabeth

2015-03-01

Physics students graduate from their course of studies to enter the ``world of work.'' While for many years that transition meant joining a large corporation for a life-long career, this is no longer the case. Today's graduates will find their career with a series of organizations - often start-ups and small to mid-sized organizations - whose future depends on the ability to rapidly leverage technical knowledge into useful products and services. This session will discuss the value of preparing physics students to be innovators and entrepreneurs, both as a strategy to prepare them for future careers, as well as an opportunity to fully engage students in seeing the relevance of physics to ``real world'' challenges. The session will feature three case studies: 1) embedding core knowledge and skills within a technical content course; 2) building learning experiences around a team-based start-up exploration; 3) engaging an entire department in considering how to comprehensively include innovation & entrepreneurship themes in the curriculum. The session will conclude with information about how faculty members and institutions can access resources for adopting this approach to their course offerings.

Training the Technical Editor.

ERIC Educational Resources Information Center

Cathcart, Margaret E.

The demand for skilled technical editors is growing as society places increasing emphasis on receiving accurate, concise, and complete technical data. Since many organizations do not have inhouse programs for training technical editors, a need exists to provide inexperienced people with basic editing skills. One organization has developed two…

Interprofessional non-technical skills for surgeons in disaster response: a qualitative study of the Australian perspective.

PubMed

Willems, Anneliese; Waxman, Buce; Bacon, Andrew K; Smith, Julian; Peller, Jennifer; Kitto, Simon

2013-03-01

Interprofessional non-technical skills for surgeons in disaster response have not yet been developed. The aims of this study were to identify the non-technical skills required of surgeons in disaster response and training for disaster response and to explore the barriers and facilitators to interprofessional practice in surgical teams responding to disasters. Twenty health professionals, with prior experience in natural disaster response or education, participated in semi-structured in-depth interviews. A qualitative matrix analysis design was used to thematically analyze the data. Non-technical skills for surgeons in disaster response identified in this study included skills for austere environments, cognitive strategies and interprofessional skills. Skills for austere environments were physical self-care including survival skills, psychological self-care, flexibility, adaptability, innovation and improvisation. Cognitive strategies identified in this study were "big picture" thinking, situational awareness, critical thinking, problem solving and creativity. Interprofessional attributes include communication, team-player, sense of humor, cultural competency and conflict resolution skills. "Interprofessionalism" in disaster teams also emerged as a key factor in this study and incorporated elements of effective teamwork, clear leadership, role adjustment and conflict resolution. The majority of participants held the belief that surgeons needed training in non-technical skills in order to achieve best practice in disaster response. Surgeons considerring becoming involved in disaster management should be trained in these skills, and these skills should be incorporated into disaster preparation courses with an interprofessional focus.

Cognitive training for technical and non-technical skills in robotic surgery: a randomised controlled trial.

PubMed

Raison, Nicholas; Ahmed, Kamran; Abe, Takashige; Brunckhorst, Oliver; Novara, Giacomo; Buffi, Nicolò; McIlhenny, Craig; van der Poel, Henk; van Hemelrijck, Mieke; Gavazzi, Andrea; Dasgupta, Prokar

2018-05-07

To investigate the effectiveness of motor imagery (MI) for technical skill and non-technical skill (NTS) training in minimally invasive surgery (MIS). A single-blind, parallel-group randomised controlled trial was conducted at the Vattikuti Institute of Robotic Surgery, King's College London. Novice surgeons were recruited by open invitation in 2015. After basic robotic skills training, participants underwent simple randomisation to either MI training or standard training. All participants completed a robotic urethrovesical anastomosis task within a simulated operating room. In addition to the technical task, participants were required to manage three scripted NTS scenarios. Assessment was performed by five blinded expert surgeons and a NTS expert using validated tools for evaluating technical skills [Global Evaluative Assessment of Robotic Skills (GEARS)] and NTS [Non-Technical Skills for Surgeons (NOTSS)]. Quality of MI was assessed using a revised Movement Imagery Questionnaire (MIQ). In all, 33 participants underwent MI training and 29 underwent standard training. Interrater reliability was high, Krippendorff's α = 0.85. After MI training, the mean (sd) GEARS score was significantly higher than after standard training, at 13.1 (3.25) vs 11.4 (2.97) (P = 0.03). There was no difference in mean NOTSS scores, at 25.8 vs 26.4 (P = 0.77). MI training was successful with significantly higher imagery scores than standard training (mean MIQ score 5.1 vs 4.5, P = 0.04). Motor imagery is an effective training tool for improving technical skill in MIS even in novice participants. No beneficial effect for NTS was found. © 2018 The Authors BJU International © 2018 BJU International Published by John Wiley & Sons Ltd.

Improving the Acquisition of Basic Technical Surgical Skills with VR-Based Simulation Coupled with Computer-Based Video Instruction.

PubMed

Rojas, David; Kapralos, Bill; Dubrowski, Adam

2016-01-01

Next to practice, feedback is the most important variable in skill acquisition. Feedback can vary in content and the way that it is used for delivery. Health professions education research has extensively examined the different effects provided by the different feedback methodologies. In this paper we compared two different types of knowledge of performance (KP) feedback. The first type was video-based KP feedback while the second type consisted of computer generated KP feedback. Results of this study showed that computer generated performance feedback is more effective than video based performance feedback. The combination of the two feedback methodologies provides trainees with a better understanding.

Assessing neurosurgical non-technical skills: an exploratory study of a new behavioural marker system.

PubMed

Michinov, Estelle; Jamet, Eric; Dodeler, Virginie; Haegelen, Claire; Jannin, Pierre

2014-10-01

The management of non-technical skills is a major factor affecting teamwork quality and patient safety. This article presents a behavioural marker system for assessing neurosurgical non-technical skills (BMS-NNTS). We tested the BMS during deep brain stimulation surgery. We developed the BMS in three stages. First, we drew up a provisional assessment tool based on the literature and observation tools developed for other surgical specialties. We then analysed videos made in an operating room (OR) during deep brain stimulation operations in order to ensure there were no significant omissions from the skills list. Finally, we used five videos of operations to identify the behavioural markers of non-technical skills in verbal communications. Analyses of more than six hours of observations revealed 3515 behaviours from which we determined the neurosurgeon's non-technical skills behaviour pattern. The neurosurgeon frequently engaged in explicit coordination, situation awareness and leadership behaviours. In addition, the neurosurgeon's behaviours differed according to the stage of the operation and the OR staff members with whom she was communicating. Our behavioural marker system provides a structured approach to assessing non-technical skills in the field of neurosurgery. It can also be transferred to other surgical specialties and used in surgeon training curricula. © 2014 John Wiley & Sons, Ltd.

Teaching the "Soft Skills": A Professional Development Curriculum to Enhance the Employability Skills of Business Graduates

ERIC Educational Resources Information Center

Winstead, Ann S.; Adams, Barbara L.; Sillah, Marion Rogers

2009-01-01

Today's business climate requires that management recruits not only know the technical aspects of their jobs, but also possess communication, teambuilding and leadership skills. Most business school curricula, however, focus only on technical skills, and do not address the "soft skills" in a formal setting or on a consistent basis. As…

Toward an objective assessment of technical skills: a national survey of surgical program directors in Saudi Arabia.

PubMed

Alkhayal, Abdullah; Aldhukair, Shahla; Alselaim, Nahar; Aldekhayel, Salah; Alhabdan, Sultan; Altaweel, Waleed; Magzoub, Mohi Elden; Zamakhshary, Mohammed

2012-01-01

After almost a decade of implementing competency-based programs in postgraduate training programs, the assessment of technical skills remains more subjective than objective. National data on the assessment of technical skills during surgical training are lacking. We conducted this study to document the assessment tools for technical skills currently used in different surgical specialties, their relationship with remediation, the recommended tools from the program directors' perspective, and program directors' attitudes toward the available objective tools to assess technical skills. This study was a cross-sectional survey of surgical program directors (PDs). The survey was initially developed using a focus group and was then sent to 116 PDs. The survey contains demographic information about the program, the objective assessment tools used, and the reason for not using assessment tools. The last section discusses the recommended tools to be used from the PDs' perspective and the PDs' attitude and motivation to apply these tools in each program. The associations between the responses to the assessment questions and remediation were statistically evaluated. Seventy-one (61%) participants responded. Of the respondents, 59% mentioned using only nonstandardized, subjective, direct observation for technical skills assessment. Sixty percent use only summative evaluation, whereas 15% perform only formative evaluations of their residents, and the remaining 22% conduct both summative and formative evaluations of their residents' technical skills. Operative portfolios are kept by 53% of programs. The percentage of programs with mechanisms for remediation is 29% (19 of 65). The survey showed that surgical training programs use different tools to assess surgical skills competency. Having a clear remediation mechanism was highly associated with reporting remediation, which reflects the capability to detect struggling residents. Surgical training leadership should invest more in standardizing the assessment of surgical skills.

Observation of behavioural markers of non-technical skills in the operating room and their relationship to intra-operative incidents.

PubMed

Siu, Joey; Maran, Nikki; Paterson-Brown, Simon

2016-06-01

The importance of non-technical skills in improving surgical safety and performance is now well recognised. Better understanding is needed of the impact that non-technical skills of the multi-disciplinary theatre team have on intra-operative incidents in the operating room (OR) using structured theatre-based assessment. The interaction of non-technical skills that influence surgical safety of the OR team will be explored and made more transparent. Between May-August 2013, a range of procedures in general and vascular surgery in the Royal Infirmary of Edinburgh were performed. Non-technical skills behavioural markers and associated intra-operative incidents were recorded using established behavioural marking systems (NOTSS, ANTS and SPLINTS). Adherence to the surgical safety checklist was also observed. A total of 51 procedures were observed, with 90 recorded incidents - 57 of which were considered avoidable. Poor situational awareness was a common area for surgeons and anaesthetists leading to most intra-operative incidents. Poor communication and teamwork across the whole OR team had a generally large impact on intra-operative incidents. Leadership was shown to be an essential set of skills for the surgeons as demonstrated by the high correlation of poor leadership with intra-operative incidents. Team-working and management skills appeared to be especially important for anaesthetists in the recovery from an intra-operative incident. A significant number of avoidable incidents occur during operative procedures. These can all be linked to failures in non-technical skills. Better training of both individual and team in non-technical skills is needed in order to improve patient safety in the operating room. Copyright © 2014 Royal College of Surgeons of Edinburgh (Scottish charity number SC005317) and Royal College of Surgeons in Ireland. Published by Elsevier Ltd. All rights reserved.

A procedural skills OSCE: assessing technical and non-technical skills of internal medicine residents.

PubMed

Pugh, Debra; Hamstra, Stanley J; Wood, Timothy J; Humphrey-Murto, Susan; Touchie, Claire; Yudkowsky, Rachel; Bordage, Georges

2015-03-01

Internists are required to perform a number of procedures that require mastery of technical and non-technical skills, however, formal assessment of these skills is often lacking. The purpose of this study was to develop, implement, and gather validity evidence for a procedural skills objective structured clinical examination (PS-OSCE) for internal medicine (IM) residents to assess their technical and non-technical skills when performing procedures. Thirty-five first to third-year IM residents participated in a 5-station PS-OSCE, which combined partial task models, standardized patients, and allied health professionals. Formal blueprinting was performed and content experts were used to develop the cases and rating instruments. Examiners underwent a frame-of-reference training session to prepare them for their rater role. Scores were compared by levels of training, experience, and to evaluation data from a non-procedural OSCE (IM-OSCE). Reliability was calculated using Generalizability analyses. Reliabilities for the technical and non-technical scores were 0.68 and 0.76, respectively. Third-year residents scored significantly higher than first-year residents on the technical (73.5 vs. 62.2%) and non-technical (83.2 vs. 75.1%) components of the PS-OSCE (p < 0.05). Residents who had performed the procedures more frequently scored higher on three of the five stations (p < 0.05). There was a moderate disattenuated correlation (r = 0.77) between the IM-OSCE and the technical component of the PS-OSCE scores. The PS-OSCE is a feasible method for assessing multiple competencies related to performing procedures and this study provides validity evidence to support its use as an in-training examination.

26 CFR 1.971-1 - Definitions with respect to export trade corporations.

Code of Federal Regulations, 2012 CFR

2012-04-01

..., industrial, financial, technical, scientific, managerial, engineering, architectural, skilled, or other..., industrial, financial, technical, scientific, managerial, engineering, architectural, skilled, or other... performance for any person of commercial, industrial, financial, technical, scientific, managerial...

26 CFR 1.971-1 - Definitions with respect to export trade corporations.

Code of Federal Regulations, 2010 CFR

2010-04-01

..., industrial, financial, technical, scientific, managerial, engineering, architectural, skilled, or other..., industrial, financial, technical, scientific, managerial, engineering, architectural, skilled, or other... performance for any person of commercial, industrial, financial, technical, scientific, managerial...

Impact of sleep deprivation on anaesthesia residents' non-technical skills: a pilot simulation-based prospective randomized trial.

PubMed

Neuschwander, A; Job, A; Younes, A; Mignon, A; Delgoulet, C; Cabon, P; Mantz, J; Tesniere, A

2017-07-01

Sleep deprivation is common in anaesthesia residents, but its impact on performance remains uncertain. Non-technical skills (team working, situation awareness, decision making, and task management) are key components of quality of care in anaesthesia, particularly in crisis situations occurring in the operating room. The impact of sleep deprivation on non-technical skills is unknown. We tested the hypothesis that in anaesthesia residents sleep deprivation is associated with impaired non-technical skills. Twenty anaesthesia residents were randomly allocated to undergo a simulation session after a night shift [sleep-deprived (SLD) group, n =10] or after a night of rest [rested (R) group, n =10] from January to March 2015. The simulated scenario was a situation of crisis management in the operating room. The primary end point was a composite score of anaesthetists' non-technical skills (ANTS) assessed by two blinded evaluators. Non-technical skills were significantly impaired in the SLD group [ANTS score 12.2 (interquartile range 10.5-13)] compared with the R group [14.5 (14-15), P <0.02]. This difference was mainly accounted for by a difference in the team working item. On the day of simulation, the SLD group showed increased sleepiness and decreased confidence in anaesthesia skills. In this randomized pilot trial, sleep deprivation was associated with impaired non-technical skills of anaesthesia residents in a simulated anaesthesia intraoperative crisis scenario. NCT02622217. © The Author 2017. Published by Oxford University Press on behalf of the British Journal of Anaesthesia. All rights reserved. For Permissions, please email: journals.permissions@oup.com

Employers' Perception of Graduates with Entry-Level Technical Skills from Construction Industry Programs in Ghana and Nigeria

ERIC Educational Resources Information Center

Acheampong, Philip

2013-01-01

The purpose of this comparative study was to identify the technical skills and abilities needed by prospective employees of construction industries in Ghana and Nigeria. Potential employees were defined here as recent graduates of construction industry programs with entry-level technical skills. The continuous growth in and expansion of these two…

Tactical and operational response to major incidents: feasibility and reliability of skills assessment using novel virtual environments.

PubMed

Cohen, Daniel; Sevdalis, Nick; Patel, Vishal; Taylor, Michael; Lee, Henry; Vokes, Mick; Heys, Mick; Taylor, David; Batrick, Nicola; Darzi, Ara

2013-07-01

To determine feasibility and reliability of skills assessment in a multi-agency, triple-site major incident response exercise carried out in a virtual world environment. Skills assessment was carried out across three scenarios. The pre-hospital scenario required paramedics to triage and treat casualties at the site of an explosion. Technical skills assessment forms were developed using training syllabus competencies and national guidelines identified by pre-hospital response experts. Non-technical skills were assessed using a seven-point scale previously developed for use by pre-hospital paramedics. The two in-hospital scenarios, focusing on a trauma team leader and a silver/clinical major incident co-ordinator, utilised the validated Trauma-NOTECHS scale to assess five domains of performance. Technical competencies were assessed using an ATLS-style competency scale for the trauma scenario. For the silver scenario, the assessment document was developed using competencies described from a similar role description in a real-life hospital major incident plan. The technical and non-technical performance of all participants was assessed live by two experts in each of the three scenarios and inter-assessor reliability was computed. Participants also self-assessed their performance using identical proformas immediately after the scenarios were completed. Self and expert assessments were correlated (assessment cross-validation). Twenty-three participants underwent all scenarios and assessments. Performance assessments were feasible for both experts as well as the participants. Non-technical performance was generally scored higher than technical performance. Very good inter-rater reliability was obtained between expert raters across all scenarios and both technical and non-technical aspects of performance (reliability range 0.59-0.90, Ps<0.01). Significant positive correlations were found between self and expert assessment in technical skills across all three scenarios (correlation range 0.52-0.84, Ps<0.05), although no such correlations were observed in non-technical skills. This study establishes feasibility and reliability of virtual environment technical and non-technical skills assessment in major incident scenarios for the first time. The development for further scenarios and validated assessment scales will enable major incident planners to utilise virtual technologies for improved major incident preparation and training. Copyright © 2012 Elsevier Ireland Ltd. All rights reserved.

Interdisciplinary Instructional Reading Strategies: An Applied Application for Business Education

ERIC Educational Resources Information Center

Polkinghorne, Frederick W.; Bland, Zinna L.

2011-01-01

The contemporary workforce requires technical and reading skills (Shanahan & Shanahan, 2008; The Conference Board, Corporate Voices for Working Families, Partnership for 21st Century Skills, Society of Human Resource Management, 2006). Technical skills allow workers to perform specific workforce tasks, while reading skills are generally needed by…

Assessing Students' Technical Skill Attainment

ERIC Educational Resources Information Center

Jorgensen, Haley

2010-01-01

The Wisconsin Technical College System (WTCS) is working to comply with the Carl D. Perkins Career and Technical Education Improvement Act of 2006 (Perkins) to ensure that its graduates have mastered the technical skills needed by business and industry. The legislation requires that each state identify and approve program assessment strategies…

Defining and assessing professional competence.

PubMed

Epstein, Ronald M; Hundert, Edward M

2002-01-09

Current assessment formats for physicians and trainees reliably test core knowledge and basic skills. However, they may underemphasize some important domains of professional medical practice, including interpersonal skills, lifelong learning, professionalism, and integration of core knowledge into clinical practice. To propose a definition of professional competence, to review current means for assessing it, and to suggest new approaches to assessment. We searched the MEDLINE database from 1966 to 2001 and reference lists of relevant articles for English-language studies of reliability or validity of measures of competence of physicians, medical students, and residents. We excluded articles of a purely descriptive nature, duplicate reports, reviews, and opinions and position statements, which yielded 195 relevant citations. Data were abstracted by 1 of us (R.M.E.). Quality criteria for inclusion were broad, given the heterogeneity of interventions, complexity of outcome measures, and paucity of randomized or longitudinal study designs. We generated an inclusive definition of competence: the habitual and judicious use of communication, knowledge, technical skills, clinical reasoning, emotions, values, and reflection in daily practice for the benefit of the individual and the community being served. Aside from protecting the public and limiting access to advanced training, assessments should foster habits of learning and self-reflection and drive institutional change. Subjective, multiple-choice, and standardized patient assessments, although reliable, underemphasize important domains of professional competence: integration of knowledge and skills, context of care, information management, teamwork, health systems, and patient-physician relationships. Few assessments observe trainees in real-life situations, incorporate the perspectives of peers and patients, or use measures that predict clinical outcomes. In addition to assessments of basic skills, new formats that assess clinical reasoning, expert judgment, management of ambiguity, professionalism, time management, learning strategies, and teamwork promise a multidimensional assessment while maintaining adequate reliability and validity. Institutional support, reflection, and mentoring must accompany the development of assessment programs.

Assessing Nurse Anaesthetists' Non-Technical Skills in the operating room.

PubMed

Lyk-Jensen, H T; Jepsen, R M H G; Spanager, L; Dieckmann, P; Østergaard, D

2014-08-01

Incident reporting and fieldwork in operating rooms have shown that some of the errors that arise in anaesthesia relate to inadequate use of non-technical skills. To provide a tool for training and feedback on nurse anaesthetists' non-technical skills, this study aimed to adapt the Anaesthetists' Non-Technical Skills (ANTS) as a behavioural marker system for the formative assessment of nurse anaesthetists' non-technical skills in the operating room. A qualitative approach with focus group interviews was used to identify the non-technical skills of nurse anaesthetists in the operating room. The interview data were transcribed verbatim. Directed content analysis was used to code and sort data deductively into the ANTS categories: task management, team working, situation awareness and decision making. The prototype named Nurse Anaesthetists' Non-Technical Skills (N-ANTS) was presented and discussed in a group of subject matter experts to ensure face validity. The N-ANTS system consists of the same four categories as ANTS and 15 underlying elements. Three to five good and poor behavioural markers for each element were identified. The headings and definitions of the categories and elements were adjusted to encompass the behavioural markers in N-ANTS. The differences that emerged mainly reflected statements regarding the establishment of role, competence, and task delegation. A behavioural marker system, N-ANTS, for nurse anaesthetists was adapted from a behavioural marker system, ANTS, for anaesthesiologists. © 2014 The Acta Anaesthesiologica Scandinavica Foundation. Published by John Wiley & Sons Ltd.

Are general surgeons able to accurately self-assess their level of technical skills?

PubMed

Rizan, C; Ansell, J; Tilston, T W; Warren, N; Torkington, J

2015-11-01

Self-assessment is a way of improving technical capabilities without the need for trainer feedback. It can identify areas for improvement and promote professional medical development. The aim of this review was to identify whether self-assessment is an accurate form of technical skills appraisal in general surgery. The PubMed, MEDLINE(®), Embase(™) and Cochrane databases were searched for studies assessing the reliability of self-assessment of technical skills in general surgery. For each study, we recorded the skills assessed and the evaluation methods used. Common endpoints between studies were compared to provide recommendations based on the levels of evidence. Twelve studies met the inclusion criteria from 22,292 initial papers. There was no level 1 evidence published. All papers compared the correlation between self-appraisal versus an expert score but differed in the technical skills assessment and the evaluation tools used. The accuracy of self-assessment improved with increasing experience (level 2 recommendation), age (level 3 recommendation) and the use of video playback (level 3 recommendation). Accuracy was reduced by stressful learning environments (level 2 recommendation), lack of familiarity with assessment tools (level 3 recommendation) and in advanced surgical procedures (level 3 recommendation). Evidence exists to support the reliability of self-assessment of technical skills in general surgery. Several variables have been shown to affect the accuracy of self-assessment of technical skills. Future work should focus on evaluating the reliability of self-assessment during live operating procedures.

Trainees' perceptions of practitioner competence during patient transfer.

PubMed

Grierson, Lawrence; Dubrowski, Adam; So, Steph; Kistner, Nicole; Carnahan, Heather

2012-01-01

Technical and communicative skills are both important features for one's perception of practitioner competence. This research examines how trainees' perceptions of practitioner competence change as they view health care practitioners who vary in their technical and communicative skill proficiencies. Occupational therapy students watched standardized encounters of a practitioner performing a patient transfer in combinations of low and high technical and communicative proficiency and then reported their perceptions of practitioner competence. The reports indicate that technical and communicative skills have independently identifiable impacts on the perceptions of practitioner competency, but technical proficiency has a special impact on the students' perceptions of practitioner communicative competence. The results are discussed with respect to the way in which students may evaluate their own competence on the basis of either technical or communicative skill. The issue of how this may lead trainees to dedicate their independent learning efforts to an incomplete set of features needed for the development of practitioner competency is raised.

Expansion Policy of Secondary Technical Education as a Correlate to the Acquisition of Basic Technical Skills by Students in Cameroon

ERIC Educational Resources Information Center

Efande, Lyonga John

2015-01-01

This study aims at investigating the relationship between the expansion of secondary Technical Education on the acquisition of technical skills by students. Technical Vocational Education and Training (TVET) has been expanding quantitatively yearly without paying enough attention to its adverse effect on quality and the acquisition of the…

Crowd-sourced assessment of technical skills: an opportunity for improvement in the assessment of laparoscopic surgical skills.

PubMed

Deal, Shanley B; Lendvay, Thomas S; Haque, Mohamad I; Brand, Timothy; Comstock, Bryan; Warren, Justin; Alseidi, Adnan

2016-02-01

Objective, unbiased assessment of surgical skills remains a challenge in surgical education. We sought to evaluate the feasibility and reliability of Crowd-Sourced Assessment of Technical Skills. Seven volunteer general surgery interns were given time for training and then testing, on laparoscopic peg transfer, precision cutting, and intracorporeal knot-tying. Six faculty experts (FEs) and 203 Amazon.com Mechanical Turk crowd workers (CWs) evaluated 21 deidentified video clips using the Global Objective Assessment of Laparoscopic Skills validated rating instrument. Within 19 hours and 15 minutes we received 662 eligible ratings from 203 CWs and 126 ratings from 6 FEs over 10 days. FE video ratings were of borderline internal consistency (Krippendorff's alpha = .55). FE ratings were highly correlated with CW ratings (Pearson's correlation coefficient = .78, P < .001). We propose the use of Crowd-Sourced Assessment of Technical Skills as a reliable, basic tool to standardize the evaluation of technical skills in general surgery. Copyright © 2016 Elsevier Inc. All rights reserved.

Examining the Professional Development Experiences and Non-Technical Skills Desired for Geoscience Employment

NASA Astrophysics Data System (ADS)

Houlton, H. R.; Ricci, J.; Wilson, C. E.; Keane, C.

2014-12-01

Professional development experiences, such as internships, research presentations and professional network building, are becoming increasingly important to enhance students' employability post-graduation. The practical, non-technical skills that are important for succeeding during these professional development experiences, such as public speaking, project management, ethical practices and writing, transition well and are imperative to the workplace. Thereby, graduates who have honed these skills are more competitive candidates for geoscience employment. Fortunately, the geoscience community recognizes the importance of these professional development opportunities and the skills required to successfully complete them, and are giving students the chance to practice non-technical skills while they are still enrolled in academic programs. The American Geosciences Institute has collected data regarding students' professional development experiences, including the preparation they receive in the corresponding non-technical skills. This talk will discuss the findings of two of AGI's survey efforts - the Geoscience Student Exit Survey and the Geoscience Careers Master's Preparation Survey (NSF: 1202707). Specifically, data highlighting the role played by internships, career opportunities and the complimentary non-technical skills will be discussed. As a practical guide, events informed by this research, such as AGI's professional development opportunities, networking luncheons and internships, will also be included.

Summer Workshop in Metagenomics: One Week Plus Eight Students Equals Gigabases of Cloned DNA †

PubMed Central

Rios-Velazquez, Carlos; Williamson, Lynn L.; Cloud-Hansen, Karen A.; Allen, Heather K.; McMahon, Mathew D.; Sabree, Zakee L.; Donato, Justin J.; Handelsman, Jo

2011-01-01

We designed a week-long laboratory workshop in metagenomics for a cohort of undergraduate student researchers. During this course, students learned and utilized molecular biology and microbiology techniques to construct a metagenomic library from Puerto Rican soil. Pre-and postworkshop assessments indicated student learning gains in technical knowledge, skills, and confidence in a research environment. Postworkshop construction of additional libraries demonstrated retention of research techniques by the students. PMID:23653755

Strategies to promote infection prevention and control in acute care hospitals with the help of infection control link nurses: A systematic literature review.

PubMed

Peter, Daniel; Meng, Michael; Kugler, Christiane; Mattner, Frauke

2018-02-01

Infection control link nurses (ICLNs) are important backup personnel for the prevention and control of infections in hospitals. To identify facilitators and barriers for the implementation of and long-term collaboration with ICLNs. We conducted a systematic literature review, following the preferred reporting items for systematic reviews and meta-analyses guidelines. Inclusion criteria were defined as description of de novo implementation of an ICLN system, strengthening of an existing ICLN system, or analysis of an ICLN system. In 10 publications, facilitators and barriers were identified for mode of selection of ICLN candidates, characteristics and responsibilities of ICLNs, composition of a training curriculum, educational strategies, and external influencing factors. Experienced nurses with an interest in infection control seemed appropriate candidates. The importance of psychological skills in addition to technical knowledge was emphasized. A clear definition of responsibilities was important. Viable tasks for ICLNs included surveillance and teaching activities and the implementation of prevention measures. Ongoing teaching was superior to a single course. Management support was pivotal for success. Research on ICLNs is scarce. The potential to decrease health care-associated infections with the help of ICLNs has been demonstrated. The training in psychological skills in addition to technical knowledge deserves more attention. Copyright © 2018 Association for Professionals in Infection Control and Epidemiology, Inc. Published by Elsevier Inc. All rights reserved.

A survey-based cross-sectional study of doctors' expectations and experiences of non-technical skills for Out of Hours work.

PubMed

Brown, Michael; Shaw, Dominick; Sharples, Sarah; Jeune, Ivan Le; Blakey, John

2015-02-16

The skill set required for junior doctors to work efficiently and safely Out of Hours (OoH) in hospitals has not been established. This is despite the OoH period representing 75% of the year and it being the time of highest mortality. We set out to explore the expectations of medical students and experiences of junior doctors of the non-technical skills needed to work OoH. Survey-based cross-sectional study informed by focus groups. Online survey with participants from five large teaching hospitals across the UK. 300 Medical Students and Doctors Participants ranked the importance of non-technical skills, as identified by literature review and focus groups, needed for OoH care. The focus groups revealed a total of eight non-technical skills deemed to be important. In the survey 'Task Prioritisation' (mean rank 1.617) was consistently identified as the most important non-technical skill. Stage of training affected the ranking of skills, with significant differences for 'Communication with Senior Doctors', 'Dealing with Clinical Isolation', 'Task Prioritisation' and 'Communication with Patients'. Importantly, there was a significant discrepancy between the medical student expectations and experiences of doctors undertaking work. Our findings suggest that medical staff particularly value task prioritisation skills; however, these are not routinely taught in medical schools. The discrepancy between expectations of students and experience of doctors reinforces the idea that there is a gap in training. Doctors of different grades place different importance on specific non-technical skills with implications for postgraduate training. There is a pressing need for medical schools and deaneries to review non-technical training to include more than communication skills. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://group.bmj.com/group/rights-licensing/permissions.

Impact of clinical leadership in teams' course on quality, efficiency, responsiveness and trust in the emergency department: study protocol of a trailing research study.

PubMed

Husebø, Sissel Eikeland; Olsen, Øystein Evjen

2016-08-10

Clinical leadership has long been recognised as critical for optimising patient safety, quality of care and interprofessional teamwork in busy and stressful healthcare settings. There is a need to compensate for the absence of the conventional mentor-to-apprentice transfer of clinical leadership knowledge and skills. While young doctors and nurses are increasingly proficient in medical, surgical and technical skills, their training in, and knowledge of clinical leadership skills, is not adequate to meet the demands for these non-technical skills in the emergency department. Thus, the purpose of the paper is to present and discuss the study protocol of clinical leadership in a course for teams that aims to improve quality, efficiency, responsiveness of healthcare services and collegial trust in the emergency department. The study employs a trailing research design using multiple quantitative and qualitative methods in the summative (pretest and post-test) and formative evaluation. Quantitative data have been collected from a patient questionnaire, the emergency departments' database and by the observation of team performance. Qualitative data have been collected by shadowing healthcare professionals and through focus group interviews. To ensure trustworthiness in the data analysis, we will apply member checks and analyst triangulation, in addition to providing contextual and sample description to allow for evaluation of transferability of our results to other contexts and groups. The study is approved by the ethics committee of the western part of Norway and the hospital. The study is based on voluntary participation and informed written consent. Informants can withdraw at any point in time. The results will be disseminated at research conferences, peer review journals and through public presentations to people outside the scientific community. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/

Developing an occupational skills profile for the emerging profession of "big-data-enabled professional"

NASA Astrophysics Data System (ADS)

Kastens, K. A.; Malyn-Smith, J.; Ippolito, J.; Krumhansl, R.

2014-12-01

In August of 2014, the Oceans of Data Institute at Education Development Center, Inc. (EDC) is convening an expert panel to begin the process of developing an occupational skills profile for the "big-data-enabled professional." We define such a professional as an "individual who works with large complex data sets on a regular basis, asking and answering questions, analyzing trends, and finding meaningful patterns, in order to increase the efficiency of processes, make decisions and predictions, solve problems, generate hypotheses, and/or develop new understandings." The expert panel includes several geophysicists, as well as data professionals from engineering, higher education, analytical journalism, forensics, bioinformatics, and telecommunications. Working with experienced facilitators, the expert panel will create a detailed synopsis of the tasks and responsibilities characteristic of their profession, as well as the skills, knowledge and behaviors that enable them to succeed in the workplace. After the panel finishes their work, the task matrix and associated narrative will be vetted and validated by a larger group of additional professionals, and then disseminated for use by educators and employers. The process we are using is called DACUM (Developing a Curriculum), adapted by EDC and optimized for emergent professions, such as the "big-data-enabled professional." DACUM is a well-established method for analyzing jobs and occupations, commonly used in technical fields to develop curriculum and training programs that reflect authentic work tasks found in scientific and technical workplaces. The premises behind the DACUM approach are that: expert workers are better able to describe their own occupation than anyone else; any job can be described in terms of the tasks that successful workers in the occupation perform; all tasks have direct implications for the knowledge, skills, understandings and attitudes that must be taught and learned in preparation for the targeted career. At AGU, we will describe the process and present the finalized occupational profile.

Engineering and management experience at Texas A&M Transportation Institute

NASA Astrophysics Data System (ADS)

Chowdhury, Arif Tahjibul

This manuscript presents the author's engineering and management experience during his internship in the Materials and Pavements (M&P) Division at the Texas A&M Transportation Institute (TTI), and is a record of study for the Doctor of Engineering at Texas A&M University. Through this internship, he met his established internship objectives of gaining technical knowledge as well as knowledge and skills in project management, organizational communication, and quality management of pavement condition data, and of attaining professional development. In meeting these objectives, the author describes the history, mission, and organizational structure of his workplace. He also presents his experience of developing and delivering a two-week training course on pavement design and construction in Kosovo. Participating in a number of professional development training courses and other activities prepared him for working as an engineering manager. These activities include Delta-T leadership training, an instructor development course, a time management and organizational skills course, and the M&P Division lecture series. Leadership and skills learned through the Delta-T program were beneficial for the employee as well as the employer. For the class project, the author and his teammates performed a study dealing with improving TTI's deliverables. The Delta-T team composed a report summarizing their efforts of examining the current state of TTI's project deliverables, the deliverables' shortcomings, and potential enhancements to expand the deliverables' appeal to additional types of potential users outside the traditional research community. The team also developed a prototype web-based model of deliverables and presented some implementation recommendations. Participating in the Texas Department of Transportation's (TxDOT's) pavement surface distress data collection program enabled the author to become familiar with pavement distress data quality management and thus attain the technical and nontechnical skills required for project management. He noticed some areas for improvement in TxDOT's rater's manual, rater's training class, and acceptance criteria for visual distress data.

Replacing Technically Skilled Workers: Challenges and Suggestions

ERIC Educational Resources Information Center

Evanciew, Cheryl E. P.; Wither, Steven V.

2004-01-01

Throughout the early 1900s, the United States could either find technically skilled workers based upon their backgrounds or was able to train workers quickly. Farmers, military personnel, and other sources of skilled workers were available to fill the needs of the workforce. These sources of readily available skilled workers are no longer as…

Work Force Education: Beyond Technical Skills. Trends and Issues Alert No. 1.

ERIC Educational Resources Information Center

Imel, Susan

This brief suggests that during the past 2 decades, the skills needed to succeed in the workplace have changed significantly. Technical skills remain important, but, increasingly, employers recognize another category of skills crucial to a worker's ability to work "smarter, not harder." These "soft,""core,""nontechnical,""essential,""generic," and…

Reliable assessment of general surgeons' non-technical skills based on video-recordings of patient simulated scenarios.

PubMed

Spanager, Lene; Beier-Holgersen, Randi; Dieckmann, Peter; Konge, Lars; Rosenberg, Jacob; Oestergaard, Doris

2013-11-01

Nontechnical skills are essential for safe and efficient surgery. The aim of this study was to evaluate the reliability of an assessment tool for surgeons' nontechnical skills, Non-Technical Skills for Surgeons dk (NOTSSdk), and the effect of rater training. A 1-day course was conducted for 15 general surgeons in which they rated surgeons' nontechnical skills in 9 video recordings of scenarios simulating real intraoperative situations. Data were gathered from 2 sessions separated by a 4-hour training session. Interrater reliability was high for both pretraining ratings (Cronbach's α = .97) and posttraining ratings (Cronbach's α = .98). There was no statistically significant development in assessment skills. The D study showed that 2 untrained raters or 1 trained rater was needed to obtain generalizability coefficients >.80. The high pretraining interrater reliability indicates that videos were easy to rate and Non-Technical Skills for Surgeons dk easy to use. This implies that Non-Technical Skills for Surgeons dk (NOTSSdk) could be an important tool in surgical training, potentially improving safety and quality for surgical patients. Copyright © 2013 Elsevier Inc. All rights reserved.

The core content of the undergraduate curriculum in Manchester.

PubMed

O'Neill, P A; Metcalfe, D; David, T J

1999-02-01

To identify the core content for the new undergraduate medical curriculum in Manchester. The initial step was to produce a list of 'index clinical situations' (ICSs), for which a newly graduated doctor must have a required level of competence. Using repeated consultation with consultants and general practitioners involved in medical education in the North-West of England, a list of 215 ICSs was agreed. Specialists and generalists were then asked to identify the components of the knowledge base and the performance (skills) base for each ICS. The knowledge base was divided into technical (biomedical facts/concepts) and contextual (effect/management of disease within the individual, family and society) domains. The performance base was divided into intellectual (problem solving and decision making) and interpersonal (history, examination, communication and procedural skills) domains. Forty specialties were consulted and 11,021 items (defined as a piece of knowledge, a concept or a skill) were identified. There was considerable overlap in the items listed, such that when the returns for each ICS were amalgamated, the 215 ICSs contained 6434 items with a mean of 34 +/- 14.2 per situation (range 6-85). UTILISATION: We have used the defined ICSs in the design of the trigger material used in the weekly problem-based learning sessions. Over 4 years almost all (207/215, 96%) of the ICS are covered, with many being revisited at several points in the curriculum.

Effectiveness of Health Education Teachers and School Nurses Teaching Sexually Transmitted Infections/Human Immunodeficiency Virus Prevention Knowledge and Skills in High School

PubMed Central

Borawski, Elaine A.; Tufts, Kimberly Adams; Trapl, Erika S.; Hayman, Laura L.; Yoder, Laura D.; Lovegreen, Loren D.

2015-01-01

BACKGROUND We examined the differential impact of a well-established human immunodeficiency virus (HIV)/sexually transmitted infections (STIs) curriculum, Be Proud! Be Responsible!, when taught by school nurses and health education classroom teachers within a high school curricula. METHODS Group-randomized intervention study of 1357 ninth and tenth grade students in 10 schools. Twenty-seven facilitators (6 nurses, 21 teachers) provided programming; nurse-led classrooms were randomly assigned. RESULTS Students taught by teachers were more likely to report their instructor to be prepared, comfortable with the material, and challenged them to think about their health than students taught by a school nurse. Both groups reported significant improvements in HIV/STI/condom knowledge immediately following the intervention, compared to controls. Yet, those taught by school nurses reported significant and sustained changes (up to 12 months after intervention) in attitudes, beliefs, and efficacy, whereas those taught by health education teachers reported far fewer changes, with sustained improvement in condom knowledge only. CONCLUSIONS Both classroom teachers and school nurses are effective in conveying reproductive health information to high school students; however, teaching the technical (eg, condom use) and interpersonal (eg, negotiation) skills needed to reduce high-risk sexual behavior may require a unique set of skills and experiences that health education teachers may not typically have. PMID:25611941

An evaluation of abdominal wall closure in general surgical and gynecological residents.

PubMed

Williams, Z; Williams, S; Easley, H A; Seita, H M; Hope, W W

2017-12-01

To evaluate abdominal wall closure knowledge base and technical skills in surgical and OB/GYN residents. Residents consented to participate in a skills laboratory and quiz. The skills portion involved closure of a 10-cm incision on a simulated abdominal wall. Participants were timed, filmed, and graded using a standardized grading system. Thirty surgical and OB/GYN residents participated. All residents reported closing the abdominal wall continuously, 97% preferred slowly absorbing sutures (28/29), 97% preferred taking 1-cm bites (29/30), and 93% spaced bites 1 cm apart (27/29). However, 77% (10/13) of surgery residents identified 4:1 as the ideal suture to wound length ratio; 47% (7/15) of OB/GYN residents believed it to be 2:1, and another 40% (6/15) indicated 3:1 (p < 0.0001). In the simulation, OB/GYN residents used significantly fewer stitches (p = 0.0028), significantly more distance between bites (p < 0.0001), and significantly larger bite size (p < 0.0001) than surgery residents. When graded, there was no significant difference between programs. Despite some knowledge regarding the principles of abdominal wall closure among surgical and OB/GYN residents, more instruction is needed. We identified some differences in knowledge base and techniques for abdominal wall closure among general surgery and OB/GYN residents, which are likely due to differences in educational curriculums.

Effectiveness of health education teachers and school nurses teaching sexually transmitted infections/human immunodeficiency virus prevention knowledge and skills in high school.

PubMed

Borawski, Elaine A; Tufts, Kimberly Adams; Trapl, Erika S; Hayman, Laura L; Yoder, Laura D; Lovegreen, Loren D

2015-03-01

We examined the differential impact of a well-established human immunodeficiency virus (HIV)/sexually transmitted infections (STIs) curriculum, Be Proud! Be Responsible!, when taught by school nurses and health education classroom teachers within a high school curricula. Group-randomized intervention study of 1357 ninth and tenth grade students in 10 schools. Twenty-seven facilitators (6 nurses, 21 teachers) provided programming; nurse-led classrooms were randomly assigned. Students taught by teachers were more likely to report their instructor to be prepared, comfortable with the material, and challenged them to think about their health than students taught by a school nurse. Both groups reported significant improvements in HIV/STI/condom knowledge immediately following the intervention, compared to controls. Yet, those taught by school nurses reported significant and sustained changes (up to 12 months after intervention) in attitudes, beliefs, and efficacy, whereas those taught by health education teachers reported far fewer changes, with sustained improvement in condom knowledge only. Both classroom teachers and school nurses are effective in conveying reproductive health information to high school students; however, teaching the technical (eg, condom use) and interpersonal (eg, negotiation) skills needed to reduce high-risk sexual behavior may require a unique set of skills and experiences that health education teachers may not typically have. © 2015, American School Health Association.

How well do second-year students learn physical diagnosis? Observational study of an Objective Structured Clinical Examination (OSCE).

PubMed

Hamann, Claus; Volkan, Kevin; Fishman, Mary B; Silvestri, Ronald C; Simon, Steven R; Fletcher, Suzanne W

2002-01-01

Little is known about using the Objective Structured Clinical Examination (OSCE) in physical diagnosis courses. The purpose of this study was to describe student performance on an OSCE in a physical diagnosis course. Cross-sectional study at Harvard Medical School, 1997-1999, for 489 second-year students. Average total OSCE score was 57% (range 39-75%). Among clinical skills, students scored highest on patient interaction (72%), followed by examination technique (65%), abnormality identification (62%), history-taking (60%), patient presentation (60%), physical examination knowledge (47%), and differential diagnosis (40%) (p <.0001). Among 16 OSCE stations, scores ranged from 70% for arthritis to 29% for calf pain (p <.0001). Teaching sites accounted for larger adjusted differences in station scores, up to 28%, than in skill scores (9%) (p <.0001). Students scored higher on interpersonal and technical skills than on interpretive or integrative skills. Station scores identified specific content that needs improved teaching.

How well do second-year students learn physical diagnosis? Observational study of an objective structured clinical examination (OSCE)

PubMed Central

Hamann, Claus; Volkan, Kevin; Fishman, Mary B; Silvestri, Ronald C; Simon, Steven R; Fletcher, Suzanne W

2002-01-01

Background Little is known about using the Objective Structured Clinical Examination (OSCE) in physical diagnosis courses. The purpose of this study was to describe student performance on an OSCE in a physical diagnosis course. Methods Cross-sectional study at Harvard Medical School, 1997–1999, for 489 second-year students. Results Average total OSCE score was 57% (range 39–75%). Among clinical skills, students scored highest on patient interaction (72%), followed by examination technique (65%), abnormality identification (62%), history-taking (60%), patient presentation (60%), physical examination knowledge (47%), and differential diagnosis (40%) (p < .0001). Among 16 OSCE stations, scores ranged from 70% for arthritis to 29% for calf pain (p < .0001). Teaching sites accounted for larger adjusted differences in station scores, up to 28%, than in skill scores (9%) (p < .0001). Conclusions Students scored higher on interpersonal and technical skills than on interpretive or integrative skills. Station scores identified specific content that needs improved teaching. PMID:11888484

Towson University's Professional Science Master's Program in Applied Physics: The first 5 years

NASA Astrophysics Data System (ADS)

Kolagani, Rajeswari

It is a well-established fact that the scientific knowledge and skills acquired in the process of obtaining a degree in physics meet the needs of a variety of positions in multiple science and technology sectors. However, in addition to scientific competence, challenging careers often call for skills in advanced communication, leadership and team functions. The professional science master's degree, which has been nick-named as the `Science MBA', aims at providing science graduates an edge both in terms of employability and earning levels by imparting such skills. Our Professional Science Master's Program in Applied Physics is designed to develop these `plus' skills through multiple avenues. In addition to advanced courses in Applied Physics, the curriculum includes graduate courses in project management, business and technical writing, together with research and internship components. I will discuss our experience and lessons learned over the 5 years since the inception of the program in 2010. The author acknowledges support from the Elkins Professorship of the University System of Maryland.

Development and implementation of centralized simulation training: evaluation of feasibility, acceptability and construct validity.

PubMed

Shamim Khan, Mohammad; Ahmed, Kamran; Gavazzi, Andrea; Gohil, Rishma; Thomas, Libby; Poulsen, Johan; Ahmed, Munir; Jaye, Peter; Dasgupta, Prokar

2013-03-01

WHAT'S KNOWN ON THE SUBJECT? AND WHAT DOES THE STUDY ADD?: A competent urologist should not only have effective technical skills, but also other attributes that would make him/her a complete surgeon. These include team-working, communication and decision-making skills. Although evidence for effectiveness of simulation exists for individual simulators, there is a paucity of evidence for utility and effectiveness of these simulators in training programmes that aims to combine technical and non-technical skills training. This article explains the process of development and validation of a centrally coordinated simulation program (Participants - South-East Region Specialist Registrars) under the umbrella of the British Association for Urological Surgeons (BAUS) and the London Deanery. This program incorporated training of both technical (synthetic, animal and virtual reality models) and non-technical skills (simulated operating theatres). To establish the feasibility and acceptability of a centralized, simulation-based training-programme. Simulation is increasingly establishing its role in urological training, with two areas that are relevant to urologists: (i) technical skills and (ii) non-technical skills. For this London Deanery supported pilot Simulation and Technology enhanced Learning Initiative (STeLI) project, we developed a structured multimodal simulation training programme. The programme incorporated: (i) technical skills training using virtual-reality simulators (Uro-mentor and Perc-mentor [Symbionix, Cleveland, OH, USA], Procedicus MIST-Nephrectomy [Mentice, Gothenburg, Sweden] and SEP Robotic simulator [Sim Surgery, Oslo, Norway]); bench-top models (synthetic models for cystocopy, transurethral resection of the prostate, transurethral resection of bladder tumour, ureteroscopy); and a European (Aalborg, Denmark) wet-lab training facility; as well as (ii) non-technical skills/crisis resource management (CRM), using SimMan (Laerdal Medical Ltd, Orpington, UK) to teach team-working, decision-making and communication skills. The feasibility, acceptability and construct validity of these training modules were assessed using validated questionnaires, as well as global and procedure/task-specific rating scales. In total 33, three specialist registrars of different grades and five urological nurses participated in the present study. Construct-validity between junior and senior trainees was significant. Of the participants, 90% rated the training models as being realistic and easy to use. In total 95% of the participants recommended the use of simulation during surgical training, 95% approved the format of the teaching by the faculty and 90% rated the sessions as well organized. A significant number of trainees (60%) would like to have easy access to a simulation facility to allow more practice and enhancement of their skills. A centralized simulation programme that provides training in both technical and non-technical skills is feasible. It is expected to improve the performance of future surgeons in a simulated environment and thus improve patient safety. © 2012 BJU International.

SoSTeM Model Development for Application of Soft Skills to Engineering Students at Malaysian Polytechnics

ERIC Educational Resources Information Center

Esa, Ahmad; Padil, Suhaili; Selamat, Asri; Idris, Mohammad Talha Mohamed

2015-01-01

Soft skills are some of the skills needed to ensure that graduates fulfill the needs of the job market. Until 2010, almost 30% of unemployed graduates in Malaysia are technical graduates and one third comes are graduates from polytechnic. Most engineering graduates are proficient in technical skills but lack in soft skills. The lack of relevant…

Progressive learning in endoscopy simulation training improves clinical performance: a blinded randomized trial.

PubMed

Grover, Samir C; Scaffidi, Michael A; Khan, Rishad; Garg, Ankit; Al-Mazroui, Ahmed; Alomani, Tareq; Yu, Jeffrey J; Plener, Ian S; Al-Awamy, Mohamed; Yong, Elaine L; Cino, Maria; Ravindran, Nikila C; Zasowski, Mark; Grantcharov, Teodor P; Walsh, Catharine M

2017-11-01

A structured comprehensive curriculum (SCC) that uses simulation-based training (SBT) can improve clinical colonoscopy performance. This curriculum may be enhanced through the application of progressive learning, a training strategy centered on incrementally challenging learners. We aimed to determine whether a progressive learning-based curriculum (PLC) would lead to superior clinical performance compared with an SCC. This was a single-blinded randomized controlled trial conducted at a single academic center. Thirty-seven novice endoscopists were recruited and randomized to either a PLC (n = 18) or to an SCC (n = 19). The PLC comprised 6 hours of SBT, which progressed in complexity and difficulty. The SCC included 6 hours of SBT, with cases of random order of difficulty. Both groups received expert feedback and 4 hours of didactic teaching. Participants were assessed at baseline, immediately after training, and 4 to 6 weeks after training. The primary outcome was participants' performance during their first 2 clinical colonoscopies, as assessed by using the Joint Advisory Group Direct Observation of Procedural Skills assessment tool (JAG DOPS). Secondary outcomes were differences in endoscopic knowledge, technical and communication skills, and global performance in the simulated setting. The PLC group outperformed the SCC group during first and second clinical colonoscopies, measured by JAG DOPS (P < .001). Additionally, the PLC group had superior technical and communication skills and global performance in the simulated setting (P < .05). There were no differences between groups in endoscopic knowledge (P > .05). Our findings demonstrate the superiority of a PLC for endoscopic simulation, compared with an SCC. Challenging trainees progressively is a simple, theory-based approach to simulation whereby the performance of clinical colonoscopies can be improved. (Clinical trial registration number: NCT02000180.). Copyright © 2017 American Society for Gastrointestinal Endoscopy. Published by Elsevier Inc. All rights reserved.

Instructional Changes Adopted for an Engineering Course: Cluster Analysis on Academic Failure

PubMed Central

Álvarez-Bermejo, José A.; Belmonte-Ureña, Luis J.; Martos-Martínez, África; Barragán-Martín, Ana B.; Simón-Márquez, María M.

2016-01-01

As first year students come from diverse backgrounds, basic skills should be accessible to everyone as soon as possible. Transferring such skills to these students is challenging, especially in highly technical courses. Ensuring that essential knowledge is acquired quickly promotes the student’s self-esteem and may positively influence failure rates. Metaphors can help do this. Metaphors are used to understand the unknown. This paper shows how we made a turn in student learning at the University of Almeria. Our hypothesis assumed that metaphors accelerate the acquisition of basic knowledge so that other skills built on that foundation are easily learned. With these goals in mind, we changed the way we teach by using metaphors and abstract concepts in a computer organization course, a technical course in the first year of an information technology engineering degree. Cluster analysis of the data on collective student performance after this methodological change clearly identified two distinct groups. These two groups perfectly matched the “before and after” scenarios of the use of metaphors. The study was conducted during 11 academic years (2002/2003 to 2012/2013). The 475 observations made during this period illustrate the usefulness of this change in teaching and learning, shifting from a propositional teaching/learning model to a more dynamic model based on metaphors and abstractions. Data covering the whole period showed favorable evolution of student achievement and reduced failure rates, not only in this course, but also in many of the following more advanced courses. The paper is structured in five sections. The first gives an introduction, the second describes the methodology. The third section describes the sample and the study carried out. The fourth section presents the results and, finally, the fifth section discusses the main conclusions. PMID:27895611

Skill, Judgement and Conduct for the First Generation of Neurosurgeons, 1900–1930

PubMed Central

Gavrus, Delia

2015-01-01

Historical contingency complicates a reading of skill as a self-explanatory and always positive attribute. By focusing on the attempts of the first generation of neurosurgeons to build a community and fashion a collective neurosurgical self, this article highlights the extent to which the relationship between surgical skill and professional judgement is reflected in broader concerns that shape the landscape of medicine at a given time. Some early twentieth-century surgeons expressed concern about the spectacularisation of surgery and the skilful but problematic work of ‘brilliant operators’. The neurosurgeons’ policies of inclusion and exclusion show that in the process of fashioning a neurosurgical persona, this first generation sanctioned specific norms of conduct underwritten by similar moral imperatives, such as self-control. These norms governed the doctors’ work both in the operating room and on the public stage (in their engagement with the press). The meetings of the first neurosurgical society staged a critical encounter between the host neurosurgeon and the members who watched him perform surgery. These technical performances in the operating theatre, followed by discussions, were designed to encourage particular norms, to negotiate surgical knowledge, and to demonstrate the skills and character of the neurosurgeon. The performances acted as a technology of the self that aligned the operator to a community and helped that community refine its norms of surgical conduct. The awkward surgeon with inferior technical ability was preferable to the brilliant but vain operator who lacked the capacity to judge when he should not deploy his spectacular skills. PMID:26090734

Ultrasound-Guided Regional Anesthesia Simulation Training: A Systematic Review.

PubMed

Chen, Xiao Xu; Trivedi, Vatsal; AlSaflan, AbdulHadi A; Todd, Suzanne Clare; Tricco, Andrea C; McCartney, Colin J L; Boet, Sylvain

Ultrasound-guided regional anesthesia (UGRA) has become the criterion standard of regional anesthesia practice. Ultrasound-guided regional anesthesia teaching programs often use simulation, and guidelines have been published to help guide URGA education. This systematic review aimed to examine the effectiveness of simulation-based education for the acquisition and maintenance of competence in UGRA. Studies identified in MEDLINE, EMBASE, CINAHL, Cochrane Central Register of Controlled Trials, and ERIC were included if they assessed simulation-based UGRA teaching with outcomes measured at Kirkpatrick level 2 (knowledge and skills), 3 (transfer of learning to the workplace), or 4 (patient outcomes). Two authors independently reviewed all identified references for eligibility, abstracted data, and appraised quality. After screening 176 citations and 45 full-text articles, 12 studies were included. Simulation-enhanced training improved knowledge acquisition (Kirkpatrick level 2) when compared with nonsimulation training. Seven studies measuring skill acquisition (Kirkpatrick level 2) found that simulation-enhanced UGRA training was significantly more effective than alternative teaching methods or no intervention. One study measuring transfer of learning into the clinical setting (Kirkpatrick level 3) found no difference between simulation-enhanced UGRA training and non-simulation-based training. However, this study was discontinued early because of technical challenges. Two studies examined patient outcomes (Kirkpatrick level 4), and one of these found that simulation-based UGRA training improved patient outcomes compared with didactic teaching. Ultrasound-guided regional anesthesia knowledge and skills significantly improved with simulation training. The acquired UGRA skills may be transferred to the clinical setting; however, further studies are required to confirm these changes translate to improved patient outcomes.

Developing physician-leaders: key competencies and available programs.

PubMed

Stoller, James K

2008-01-01

Because effective leadership is critical to organizational success, frontrunner organizations cultivate leaders for bench depth and pipeline development. The many challenges in healthcare today create a special need for great leadership. This paper reviews the leadership competencies needed by physician-leaders and current experience with developing physician-leaders in healthcare institution-sponsored programs. On the basis of this review, six key leadership competency domains are proposed: 1. technical skills and knowledge (regarding operational, financial, and information systems, human resources, and strategic planning), 2. industry knowledge (e.g., regarding clinical processes, regulation, and healthcare trends), 3. problem-solving skills, 4. emotional intelligence, 5. communication, and 6. a commitment to lifelong learning. Review of current experience indicates that, in addition to leadership training through degree and certificate-granting programs (e.g., by universities and/or official medical societies), healthcare institutions themselves are developing intramural programs to cultivate physician-leaders. Greater attention is needed to assessing the impact and effectiveness of such programs in developing leaders and benefiting organizational outcomes.

Advanced interdisciplinary undergraduate program: light engineering

NASA Astrophysics Data System (ADS)

Bakholdin, Alexey; Bougrov, Vladislav; Voznesenskaya, Anna; Ezhova, Kseniia

2016-09-01

The undergraduate educational program "Light Engineering" of an advanced level of studies is focused on development of scientific learning outcomes and training of professionals, whose activities are in the interdisciplinary fields of Optical engineering and Technical physics. The program gives practical experience in transmission, reception, storage, processing and displaying information using opto-electronic devices, automation of optical systems design, computer image modeling, automated quality control and characterization of optical devices. The program is implemented in accordance with Educational standards of the ITMO University. The specific features of the Program is practice- and problem-based learning implemented by engaging students to perform research and projects, internships at the enterprises and in leading Russian and international research educational centers. The modular structure of the Program and a significant proportion of variable disciplines provide the concept of individual learning for each student. Learning outcomes of the program's graduates include theoretical knowledge and skills in natural science and core professional disciplines, deep knowledge of modern computer technologies, research expertise, design skills, optical and optoelectronic systems and devices.

Representation of dental care and oral health in children's drawings.

PubMed

Torriani, D D; Goettems, M L; Cademartori, M G; Fernandez, R R; Bussoletti, D M

2014-06-01

Paediatric dentistry requires knowledge of preventive measures, restorative skills and an understanding of child development. This exploratory, descriptive and qualitative study has analysed children's drawings regarding their perception of dental treatment and oral health. Children aged from six to ten years attending a dental school for treatment were randomly invited to create a drawing about 'dental treatment' and 'oral health'. Verbal expressions made by the children whilst drawing were also recorded and attached to the drawings. These representations were analysed and categorised using Vygotsky postulations for context reading. During the drawing analysis different themes emerged. Five categories regarding perceptions of dental treatment were identified: personal relationship; power relation; trauma; childhood resistance; and contextualisation of dental care in the child's life. Three categories relating to oral health were determined: dichotomy of health/sickness; ludic representation of health; and sickness seen as a process. Drawing can be used to understand children's emotions and expectations about dental treatment. Besides possessing technical skills and scientific knowledge, dentists have an obligation to pay attention to children's feelings.

A New Approach to Teaching Biomechanics Through Active, Adaptive, and Experiential Learning.

PubMed

Singh, Anita

2017-07-01

Demand of biomedical engineers continues to rise to meet the needs of healthcare industry. Current training of bioengineers follows the traditional and dominant model of theory-focused curricula. However, the unmet needs of the healthcare industry warrant newer skill sets in these engineers. Translational training strategies such as solving real world problems through active, adaptive, and experiential learning hold promise. In this paper, we report our findings of adding a real-world 4-week problem-based learning unit into a biomechanics capstone course for engineering students. Surveys assessed student perceptions of the activity and learning experience. While students, across three cohorts, felt challenged to solve a real-world problem identified during the simulation lab visit, they felt more confident in utilizing knowledge learned in the biomechanics course and self-directed research. Instructor evaluations indicated that the active and experiential learning approach fostered their technical knowledge and life-long learning skills while exposing them to the components of adaptive learning and innovation.

The lived experiences of operating theatre scrub nurses learning technical scrub skills 'I'm doing this right, aren't I? Am I doing this right?'

PubMed

Radford, Eleanor J; Fotis, Theo

2018-01-01

Operating theatre scrub nurses (OTSNs) are not required to have undertaken a secondary or specialist post-registration theatre qualification to work in the operating theatre (OT) setting in the UK. From the systematic review there is only very limited literature or research in how technical scrub skills are acquired. This study explores the lived experiences of OTSNs learning technical scrub skills. The study employed the qualitative methodology of interpretative phenomenological analysis. Data was collected from six participating OTSNs using semi-structured interviews. Four superordinate themes emerged: How technical scrub skills are established, Gatekeepers, How the learner feels whilst learning and, Reflections of the experienced scrub nurse. The study found that the experiences of OTSNs learning technical scrub skills are varied and a variety of teaching and learning methods are utilised. These experiences were influenced by the team, mentor and surgeon within the OT environment. Lived experiences were also influenced by organisational structure and service pressures within the NHS.

Non-Technical Skills for Surgeons (NOTSS): Critical appraisal of its measurement properties.

PubMed

Jung, James J; Borkhoff, Cornelia M; Jüni, Peter; Grantcharov, Teodor P

2018-02-17

To critically appraise the development and measurement properties, including sensibility, reliability, and validity of the Non-Technical Skills of Surgeons (NOTSS) system. Articles that described development process of the NOTSS system were identified. Relevant primary studies that presented evidence of reliability and validity were identified through a comprehensive literature review. NOTSS was developed through robust item generation and reduction strategies. It was shown to have good content validity, acceptability, and feasibility. Inter-rater reliability increased with greater expertise and number of assessors. Studies demonstrated evidence of cross-sectional construct validity, in that the tool was able to differentiate known groups of varied non-technical skill levels. Evidence of longitudinal construct validity also existed to demonstrate that NOTSS detected changes in non-technical skills before and after targeted training. In populations and settings presented in our critical appraisal, NOTSS provided reliable and valid measurements of intraoperative non-technical skills of surgeons. Copyright © 2018 Elsevier Inc. All rights reserved.

Non-technical skills training to enhance patient safety.

PubMed

Gordon, Morris

2013-06-01

  Patient safety is an increasingly recognised issue in health care. Systems-based and organisational methods of quality improvement, as well as education focusing on key clinical areas, are common, but there are few reports of educational interventions that focus on non-technical skills to address human factor sources of error. A flexible model for non-technical skills training for health care professionals has been designed based on the best available evidence, and with sound theoretical foundations.   Educational sessions to improve non-technical skills in health care have been described before. The descriptions lack the details to allow educators to replicate and innovate further.   A non-technical skills training course that can be delivered as either a half- or full-day intervention has been designed and delivered to a number of mixed groups of undergraduate medical students and doctors in postgraduate training. Participant satisfaction has been high and patient safety attitudes have improved post-intervention.   This non-technical skills educational intervention has been built on a sound evidence base, and is described so as to facilitate replication and dissemination. With the key themes laid out, clinical educators will be able to build interventions focused on numerous clinical issues that pay attention to human factor contributors to safety. © 2013 John Wiley & Sons Ltd.

A Human Factors Analysis of Technical and Team Skills Among Surgical Trainees During Procedural Simulations in a Simulated Operating Theatre

PubMed Central

Moorthy, Krishna; Munz, Yaron; Adams, Sally; Pandey, Vikas; Darzi, Ara

2005-01-01

Background: High-risk organizations such as aviation rely on simulations for the training and assessment of technical and team performance. The aim of this study was to develop a simulated environment for surgical trainees using similar principles. Methods: A total of 27 surgical trainees carried out a simulated procedure in a Simulated Operating Theatre with a standardized OR team. Observation of OR events was carried out by an unobtrusive data collection system: clinical data recorder. Assessment of performance consisted of blinded rating of technical skills, a checklist of technical events, an assessment of communication, and a global rating of team skills by a human factors expert and trained surgical research fellows. The participants underwent a debriefing session, and the face validity of the simulated environment was evaluated. Results: While technical skills rating discriminated between surgeons according to experience (P = 0.002), there were no differences in terms of the checklist and team skills (P = 0.70). While all trainees were observed to gown/glove and handle sharps correctly, low scores were observed for some key features of communication with other team members. Low scores were obtained by the entire cohort for vigilance. Interobserver reliability was 0.90 and 0.89 for technical and team skills ratings. Conclusions: The simulated operating theatre could serve as an environment for the development of surgical competence among surgical trainees. Objective, structured, and multimodal assessment of performance during simulated procedures could serve as a basis for focused feedback during training of technical and team skills. PMID:16244534

Academic & Technical Skills + Life/Work Skills + Career Information & Guidance = Success in Career Building.

ERIC Educational Resources Information Center

Jarvis, Phillip S.

There has been a renaissance in the thinking about career development. It is becoming accepted that information is not enough; in addition to academic and technical skills, youth and adults need to learn life/work designing and building skills to become healthy, productive, and self-reliant citizens. Despite the fact that Canadian students have…

The Inculcation of Generic Skills among Juveniles through Technical and Vocational Education

ERIC Educational Resources Information Center

Wan-Mohamed, Wan Azlinda; Yunus, Mohamed Hafis

2009-01-01

Generic skills are skills which contribute towards individual's effective and successful participation in the workplace. For juveniles, Technical and Vocational Education (TVE) is one of the platforms that provide them generic skills which enable them to compete for job market. The purpose of this study is to investigate the level of generic…

Technical skills rotation for general surgery residents.

PubMed

Gonzalez, Ray I; Martinez, Jose M; Iglesias, Alberto R; Lo Menzo, Emanuele; Hutson, Duane; Sleeman, Danny; Livingstone, Alan S; Madan, Atul K

2010-06-15

Technical skills are an important part of any general surgery residency curriculum. With the demands of limited work weeks, it is imperative that educators create novel methods of teaching technical skills to their residents. Our program utilizes a dedicated month to help accomplish this. This study hypothesized that general surgery residents would report a positive effect of a dedicated technical skills rotation. Residents who had undergone a 1 mo rotation in technical skills during their first year were asked to fill out a survey concerning their experience. During the 1-mo rotation, the residents had almost no clinical responsibilities. Teaching of technical skills was performed with various activities, including video content (VC), virtual reality simulators (VR), open foam procedures (OF), laparoscopic box trainers (BT), surgical equipment in-service (SE), and animate sessions (AS). Responses were given on a Likert scale (1-10) with higher numbers being more positive responses. There were seven residents in this study. The residents gave a very positive response to the overall rotation (9.4) and exposure to laparoscopic procedures (9.6). The other responses were enthusiastic as well: exposure to open procedures (8.9) and preparation for operative room (9.4). After their rotation, the residents were comfortable performing a laparoscopic cholecystectomy (9.2), a hand-sewn anastomosis (8.7), and a stapled anastomosis (9.4). The residents found theses activities helpful in increasing order: VC (7.8), VR (8.0), BT (9.0), ES (9.7), OF (9.8), and AS (9.8). A 1-mo dedicated technical skills rotations was perceived to be extremely positive by the residents. The residents felt very comfortable performing a laparoscopic cholecystectomy, a hand-sewn anastomosis, and a stapled anastomosis. With the 80-h work week, alternatives to learning technical skills in the operating room are essential. Further studies need to be performed to determine if this rotation aids in accomplishing this goal. Copyright 2010. Published by Elsevier Inc.

Environmental Engineering Curricula assessment in the global world

NASA Astrophysics Data System (ADS)

Caporali, Enrica; Catelani, Marcantonio; Manfrida, Giampaolo; Valdiserri, Juna

2014-05-01

Environmental engineers are technicians with specific expertise on the sustainability of human presence in the environment. Among other global dilemmas, to the environmental engineers it is often demanded to be able in developing systematic, innovative solutions in order to simultaneously meet water and energy needs, to build resilience to natural and technological disasters, to more accurately gauge and manage countries' greenhouse gas emissions. The general objectives of the Environmental Engineers are to establish actions of environmental sustainability as well as to verify progress toward global goals or international commitments. The globalization of challenges and problems to be faced, leads, in general, to the globalization of the engineering profession. In particular, since the environmental issues are without boundaries, and many and different are the involved professions and the competences, the environmental engineer must have a multidisciplinary and interdisciplinary approach to adequately answer to the demand of technical innovative knowledge at global scale. The environmental engineers, more and more, are involved in international projects were the effective collaboration requires not only the capacity to communicate in a common technical language, but also the assurance of an adequate and common level of technical competences, knowledge and understanding. The Europe-based EUR ACE system, currently operated by ENAEE - European Network for Accreditation of Engineering Education, can represent the proper framework and accreditation system in order to provide a set of measures to assess the quality of engineering degree programmes in Europe and abroad. In the global frame of the knowledge triangle: education-innovation-research, the accreditation and quality assurance of engineering curricula in Europe is discussed with reference to the Environmental engineering curricula, of the 1st and 2nd cycle, based on the European Credit Transfer System and in accordance with the Bologna Process, offered at School of Engineering, University of Firenze. The application of the accreditation model EUR-ACE to the multidisciplinary first cycle degree in Civil, Building and Environmental Engineering and the more specific second cycle degree in Environmental Engineering is discussed. Particularly, the critical issues to guarantee the quality and the status of environmental engineering graduates, in terms of applying knowledge capacities and technical innovative competences are examined. The expected learning outcomes of the quality assessment according the Dublin descriptors or the more engineering focused EUR-ACE skill descriptors, and at local and global scale are analysed. The system for educating engineers in communicating knowledge and understanding, making informed judgments and choices, capacities to lifelong learning is also assessed. The involvement of the professional working world in the definition of goals in skills, of typical expectations of achievements and abilities, and in general in comparing the teaching profile with the actual needs of the technical workforce, is described. With the aim to promote the innovative aspects related with the environmental engineering education, the important role that science and technology could play is also taken into consideration.

Science, Technology and Innovation as Social Goods for Development: Rethinking Research Capacity Building from Sen's Capabilities Approach.

PubMed

Mormina, Maru

2018-03-01

Science and technology are key to economic and social development, yet the capacity for scientific innovation remains globally unequally distributed. Although a priority for development cooperation, building or developing research capacity is often reduced in practice to promoting knowledge transfers, for example through North-South partnerships. Research capacity building/development tends to focus on developing scientists' technical competencies through training, without parallel investments to develop and sustain the socioeconomic and political structures that facilitate knowledge creation. This, the paper argues, significantly contributes to the scientific divide between developed and developing countries more than any skills shortage. Using Charles Taylor's concept of irreducibly social goods, the paper extends Sen's Capabilities Approach beyond its traditional focus on individual entitlements to present a view of scientific knowledge as a social good and the capability to produce it as a social capability. Expanding this capability requires going beyond current fragmented approaches to research capacity building to holistically strengthen the different social, political and economic structures that make up a nation's innovation system. This has implications for the interpretation of human rights instruments beyond their current focus on access to knowledge and for focusing science policy and global research partnerships to design approaches to capacity building/development beyond individual training/skills building.

Educational robotics as an Innovative teaching practice using technology: minimization of risks

NASA Astrophysics Data System (ADS)

Kvesko, S. B.; Kvesko, N. G.; Korniyenko, A. A.; Kabanova, N. N.

2018-05-01

This research is focused on studying educational robotics, specifically robots which provide functions of educational activity. We have considered the questions of intelligent agents’ behavior and have studied their educational opportunities. Educational robotics is a powerful tool of developing person’s skills and abilities in various fields of technical creativity and professional activity. The evolutionary development of robotics is connected with development of artificial intelligence, where emotions play a great role in operations. Nowadays the main thing is to form the ability and skills of optimum interaction with social environment when a person, based on gained knowledge, is capable to put goals of the activity in strict accordance with laws and society conditions and using current technology.

Peoria Housing Authority(PHA) Weatherization Training Project

DOE Office of Scientific and Technical Information (OSTI.GOV)

Phillip Chrismon; Jason Dollarhide

2011-12-31

The DOE Weatherization Training Project's goal is to obtain a solid foundation of administrative and technical knowledge so the Peoria Housing Authority (PHA) can establish and implement a successful Weatherization Program by 2011. The DOE weatherization Training Project's two objectives are to (1) build PHA's capabilities by (2) developing its staff members capacities via the acquisition of weatherization skills and competencies. The impacts from this project include: (a) the improvement and expansion of PHA staff skills, (b) the overall enhancement of the quality of the PHA workforce, which will (c) foster employment, (d) the ability to properly weatherize PHA housingmore » stock, tribal buildings, and tribal members houses, which will (e) result in reduced energy use, and (f) improved tribal and household economies.« less

[Situational awareness: you won't see it unless you understand it].

PubMed

Graafland, Maurits; Schijven, Marlies P

2015-01-01

In dynamic, high-risk environments such as the modern operating theatre, healthcare providers are required to identify a multitude of signals correctly and in time. Errors resulting from failure to identify or interpret signals correctly lead to calamities. Medical training curricula focus largely on teaching technical skills and knowledge, not on the cognitive skills needed to interact appropriately with fast-changing, complex environments in practice. The term 'situational awareness' describes the dynamic process of receiving, interpreting and processing information in such dynamic environments. Improving situational awareness in high-risk environments should be part of medical curricula. In addition, the flood of information in high-risk environments should be presented more clearly and effectively. It is important that physicians become more involved in this regard.

Implementing and Evaluating a National Certification Technical Skills Examination: The Colorectal Objective Structured Assessment of Technical Skill.

PubMed

de Montbrun, Sandra; Roberts, Patricia L; Satterthwaite, Lisa; MacRae, Helen

2016-07-01

To implement the Colorectal Objective Structured Assessment of Technical skill (COSATS) into American Board of Colon and Rectal Surgery (ABCRS) certification and build evidence of validity for the interpretation of the scores of this high stakes assessment tool. Currently, technical skill assessment is not a formal component of board certification. With the technical demands of surgical specialties, documenting competence in technical skill at the time of certification with a valid tool is ideal. In September 2014, the COSATS was a mandatory component of ABCRS certification. Seventy candidates took the examination, with their performance evaluated by expert colorectal surgeons using a task-specific checklist, global rating scale, and overall performance scale. Passing scores were set and compared using 2 standard setting methodologies, using a compensatory and conjunctive model. Inter-rater reliability and the reliability of the pass/fail decision were calculated using Cronbach alpha and Subkoviak methodology, respectively. Overall COSATS scores and pass/fail status were compared with results on the ABCRS oral examination. The pass rate ranged from 85.7% to 90%. Inter-rater reliability (0.85) and reliability of the pass/fail decision (0.87 and 0.84) were high. A low positive correlation (r= 0.25) was seen between the COSATS and oral examination. All individuals who failed the COSATS passed the ABCRS oral examination. COSATS is the first technical skill examination used in national surgical board certification. This study suggests that the current certification process may be failing to identify individuals who have demonstrated technical deficiencies on this standardized assessment tool.

An ergonomic approach to improve work conditions of older employees in social housing.

PubMed

Biquand, Sylvain; Heddad, Nadia

2012-01-01

French companies are legally required to develop action plans to improve employment and work conditions for older workers ("plans seniors"). These plans contain measures oriented towards recruiting, career evolution, skills developme1nt, knowledge transmission and improvement of work conditions. A tool for assessing work situations experienced by council buildings caretakers ("gardiens") was used in such a plan on behalf of the main agency of council housing in Paris, and we developed. This assessment tool was developed after ergonomic work analysis on a sample of 36 older caretakers (age > 57 y.o). The technical inspectors in charge of technical interventions on buildings and managing caretakers were trained to use the assessment tool and apply it to all caretakers aged 50 and over.

From Online to Ubiquitous Cities: The Technical Transformation of Virtual Communities

NASA Astrophysics Data System (ADS)

Anthopoulos, Leonidas; Fitsilis, Panos

Various digital city projects, from the online cases (e.g. the America on Line) to the ubiquitous cities of South Korea, have achieved in creating technically 'physical' areas for the virtual communities, which share knowledge of common interest. Moreover, digital cities can succeed in simplifying citizen access to public information and services. Early digital cities deliver 'smart' and social services to citizens even with no digital skills, closing digital divide and establishing digital areas of trust in local communities. This paper presents the evolution of the digital cities, from the web to the ubiquitous architecture. It uses the latest digital city architecture and the current conditions of the digital city of Trikala (Greece), in order to present the evolution procedure of a digital city.

Use of internet technologies for students' communicative competence development in the process of professional foreign language study in technical universities

NASA Astrophysics Data System (ADS)

Khasanova, A. N.

2017-01-01

Problems of mature thinking formation and development of foreign-language professional communicative competence of competitive graduates of technical universities are considered in the article. The most important factors influencing the achievement of high standard of knowledge, students' abilities and skills and increase of their abilities to establish deep meta-subject connections due to Internet technologies in the course of professional foreign language training are analyzed. The article is written on the basis of project material "Network School of National Research Nuclear University MEPhI" aimed at optimization of technological aspect of training. The given academic on-line program assigns to the teacher a part of an organizer who only coordinates creative, academic students' activity.

Measuring non-technical skills in medical emergency care: a review of assessment measures

PubMed Central

Cooper, Simon; Endacott, Ruth; Cant, Robyn

2010-01-01

Aim To review the literature on non-technical skills and assessment methods relevant to emergency care. Background Non-technical skills (NTS) include leadership, teamwork, decision making and situation awareness, all of which have an impact on healthcare outcomes. Significant concerns have been raised about the rates of adverse medical events, many of which are attributed to NTS failures. Methods Ovid, Medline, ProQUEST, PsycINFO and specialty websites were searched for NTS measures using applicable access strategies, inclusion and exclusion criteria. Publications identified were assessed for relevance. Results A range of non-technical skill measures relevant to emergency care was identified: leadership (n = 5), teamwork (n = 7), personality/behavior (n = 3) and situation awareness tools (n = 1). Of these, 9 have been used with emergency care populations/clinicians. All had varying degrees of reliability and validity. In the last decade there has been some development of teamwork measures specific to emergency care with a predominantly global and collective rating of broad skills. Conclusion A variety of non-technical skill measures are available; only a few have been used in the emergency care arena. There is a need for an increase in the focused assessment of teamwork skills for a greater understanding of team performance to enhance patient safety in medical emergency care. PMID:27147832

Two case reports of unexpected tracheal agenesis in the neonate: 3 C's beyond algorithms for difficult airway management.

PubMed

Grass, Beate; Simma, Leopold; Reinehr, Michael; Zimmermann, Urs; Gysin, Claudine; Henze, Georg; Cannizzaro, Vincenzo

2017-02-08

Handling neonates with postnatal respiratory failure due to congenital airway malformations implies knowledge about emergency management of unexpected difficult airway. In these stressful situations both technical and communication skills of the caretakers are essential. Two cases with prenatally unknown tracheal agenesis are reported. In the presented cases, airway malformation and subsequent difficulties upon endotracheal intubation were not adequately communicated between caretakers. We discuss the aspects of culture, communication, and capnography.

White Paper: Landscape on Technical and Conceptual Requirements and Competence Framework in Drug/Disease Modeling and Simulation

PubMed Central

Vlasakakis, G; Comets, E; Keunecke, A; Gueorguieva, I; Magni, P; Terranova, N; Della Pasqua, O; de Lange, E C; Kloft, C

2013-01-01

Pharmaceutical sciences experts and regulators acknowledge that pharmaceutical development as well as drug usage requires more than scientific advancements to cope with current attrition rates/therapeutic failures. Drug disease modeling and simulation (DDM&S) creates a paradigm to enable an integrated and higher-level understanding of drugs, (diseased)systems, and their interactions (systems pharmacology) through mathematical/statistical models (pharmacometrics)1—hence facilitating decision making during drug development and therapeutic usage of medicines. To identify gaps and challenges in DDM&S, an inventory of skills and competencies currently available in academia, industry, and clinical practice was obtained through survey. The survey outcomes revealed benefits, weaknesses, and hurdles for the implementation of DDM&S. In addition, the survey indicated that no consensus exists about the knowledge, skills, and attributes required to perform DDM&S activities effectively. Hence, a landscape of technical and conceptual requirements for DDM&S was identified and serves as a basis for developing a framework of competencies to guide future education and training in DDM&S. PMID:23887723

Models and Methods for Adaptive Management of Individual and Team-Based Training Using a Simulator

NASA Astrophysics Data System (ADS)

Lisitsyna, L. S.; Smetyuh, N. P.; Golikov, S. P.

2017-05-01

Research of adaptive individual and team-based training has been analyzed and helped find out that both in Russia and abroad, individual and team-based training and retraining of AASTM operators usually includes: production training, training of general computer and office equipment skills, simulator training including virtual simulators which use computers to simulate real-world manufacturing situation, and, as a rule, the evaluation of AASTM operators’ knowledge determined by completeness and adequacy of their actions under the simulated conditions. Such approach to training and re-training of AASTM operators stipulates only technical training of operators and testing their knowledge based on assessing their actions in a simulated environment.

Development and Application of Skill Standards for Security Practitioners

DTIC Science & Technology

2006-07-01

Development and Application of Skill Standards for Security Practitioners Henry K. Simpson Northrop Grumman Technical Services Lynn F. Fischer...and Application of Skill Standards for Security Practitioners Henry K. Simpson, Northrop Grumman Technical Services Lynn F. Fischer, Defense...described in the present report was driven by a JSTC tasking to develop skill standards for security practitioners in seven different security

Is Three-Dimensional Videography the Cutting Edge of Surgical Skill Acquisition?

ERIC Educational Resources Information Center

Roach, Victoria A.; Brandt, Michael G.; Moore, Corey C.; Wilson, Timothy D.

2012-01-01

The process of learning new surgical technical skills is vital to the career of a surgeon. The acquisition of these new skills is influenced greatly by visual-spatial ability (VSA) and may be difficult for some learners to rapidly assimilate. In many cases, the role of VSA on the acquisition of a novel technical skill has been explored; however,…

S&MA Internship to Support Orion and the European Service Module

NASA Technical Reports Server (NTRS)

Hutcheson, Connor

2016-01-01

As a University Space Research Association (USRA) intern for NASA Johnson Space Center (JSC) during the summer 2016 work term, I worked on three main projects for the Space Exploration Division (NC) of the Safety and Mission Assurance (S&MA) Directorate. I worked on all three projects concurrently. One of the projects involved facilitating the status and closure of technical actions that were created during European Service Module (ESM) safety reviews by the MPCV Safety & Engineering Review Panel (MSERP). The two main duties included accurately collecting and summarizing qualitative data, and communicating that information to the European Space Agency (ESA) and Airbus (ESA's prime contractor) in a clear, succinct and precise manner. This project also required that I create a report on the challenges and opportunities of international S&MA. With its heavy emphasis on soft skills, this project taught me how to communicate better, by showing me how to present and share information in an easy-to-read and understandable format, and by showing me how to cooperate with and culturally respect international partners on a technical project. The second project involved working with the Orion Thermal Protection System (TPS) Process Failure Modes and Effects Analysis (PFMEA) Working Group to create the first full version of the Orion TPS PFMEA. The Orion TPS PFMEA Working Group met twice a week to analyze the Avcoat block installation process for failure modes, the failure modes effects, and how such failure modes could be controlled. I was in charge of implementing changes that were discussed in meeting, but were not implemented real time. Another major task included creating a significant portion of the content alongside another team member outside the two weekly meetings. This project caused me to become knowledgeable about TPS, heatshields, space-rated manufacturing, and non-destructive evaluation (NDE). The project also helped me to become better at working with a small team and helped improved my technical communication skills. My main duty for the third project was creating a Safety Verification Tracking Log (SVTL) for the Orbital Maneuvering System Engine (OMS-E), and contacting subject matter experts to close Hazard Report (HR) control verifications. This project also required me to support other OMS-E safety process tasks, like monitoring OMS-E vibration testing for Quality Assurance (QA) purposes. This project helped me become even more proficient in Excel. Throughout the project, I gained knowledge about the OMS-E system and improved my understanding of pressure systems and propellant systems. In terms of education goals, this work term has affirmed my desire to take a few more space-related courses, like orbital mechanics, so that I can have a better understanding of human spaceflight and the industry surrounding it. However, the work term did not persuade me to pursue a master's degree. In terms of career goals, this work term has helped me clarify the direction I would like to head in the future. The perspective of three summer terms working for NASA in S&MA has allowed me to observe that most S&MA employees joined S&MA after working in other NASA directorates, such as Engineering or Flight Operations. It is my belief that it would be advantageous for both NASA and I for me to broaden my knowledge base and technical skill set by completing hands-on technical work on human spaceflight projects, and for me to integrate my safety experience directly into technical work in other directorates. The other significant advantage to this proposed situation is that if I were to eventually return to S&MA, I would be returning with a substantial set of hands-on technical experience and knowledge, which would be a significant resource for S&MA tasks and projects.

Illinois Occupational Skill Standards: Chemical Process Technical Operators.

ERIC Educational Resources Information Center

Illinois Occupational Skill Standards and Credentialing Council, Carbondale.

This document, which is intended for workforce preparation program providers, details the Illinois Occupational Skill Standards for programs preparing students for employment as chemical process technical operators. The document begins with a brief overview of the Illinois perspective on occupational skill standards and credentialing, the process…

Middlesex Community College Software Technical Writing Program.

ERIC Educational Resources Information Center

Middlesex Community Coll., Bedford, MA.

This document describes the Software Technical Writing Program at Middlesex Community College (Massachusetts). The program is a "hands-on" course designed to develop job-related skills in three major areas: technical writing, software, and professional skills. The program was originally designed in cooperation with the Massachusetts High…

Factors that Influence Women's Technical Skill Development in Outdoor Adventure

ERIC Educational Resources Information Center

Warren, Karen; Loeffler, TA

2006-01-01

This article provides a theoretical foundation for understanding women's technical skill development (TSD) in outdoor adventure. An examination of societal and biological factors influencing women's TSD focuses on gender role socialization, sense of competence, technical conditioning, sexism, spatial ability, and risk-taking. The article suggests…

Associations between therapy skills and patient experiences of change processes in cognitive behavioral therapy for psychosis.

PubMed

Wittorf, Andreas; Jakobi-Malterre, Ute E; Beulen, Silke; Bechdolf, Andreas; Müller, Bernhard W; Sartory, Gudrun; Wagner, Michael; Wiedemann, Georg; Wölwer, Wolfgang; Herrlich, Jutta; Klingberg, Stefan

2013-12-30

Despite the promising findings in relation to the efficacy of cognitive behavioral therapy for psychosis (CBTp), little attention has been paid to the therapy skills necessary to deliver CBTp and to the influence of such skills on processes underlying therapeutic change. Our study investigated the associations between general and technical therapy skills and patient experiences of change processes in CBTp. The study sample consisted of 79 patients with psychotic disorders who had undergone CBTp. We randomly selected one tape-recorded therapy session from each of the cases. General and technical therapy skills were assessed by the Cognitive Therapy Scale for Psychosis. The Bern Post Session Report for Patients was applied to measure patient experiences of general change processes in the sense of Grawe's psychological therapy. General skills, such as feedback and understanding, explained 23% of the variance of patients' self-esteem experience, but up to 10% of the variance of mastery, clarification, and contentment experiences. The technical skill of guided discovery consistently showed negative associations with patients' alliance, contentment, and control experiences. The study points to the importance of general therapy skills for patient experiences of change processes in CBTp. Some technical skills, however, could detrimentally affect the therapeutic relationship. © 2013 Elsevier Ireland Ltd. All rights reserved.

Non-technical skills of surgeons and anaesthetists in simulated operating theatre crises.

PubMed

Doumouras, A G; Hamidi, M; Lung, K; Tarola, C L; Tsao, M W; Scott, J W; Smink, D S; Yule, S

2017-07-01

Deficiencies in non-technical skills (NTS) have been increasingly implicated in avoidable operating theatre errors. Accordingly, this study sought to characterize the impact of surgeon and anaesthetist non-technical skills on time to crisis resolution in a simulated operating theatre. Non-technical skills were assessed during 26 simulated crises (haemorrhage and airway emergency) performed by surgical teams. Teams consisted of surgeons, anaesthetists and nurses. Behaviour was assessed by four trained raters using the Non-Technical Skills for Surgeons (NOTSS) and Anaesthetists' Non-Technical Skills (ANTS) rating scales before and during the crisis phase of each scenario. The primary endpoint was time to crisis resolution; secondary endpoints included NTS scores before and during the crisis. A cross-classified linear mixed-effects model was used for the final analysis. Thirteen different surgical teams were assessed. Higher NTS ratings resulted in significantly faster crisis resolution. For anaesthetists, every 1-point increase in ANTS score was associated with a decrease of 53·50 (95 per cent c.i. 31·13 to 75·87) s in time to crisis resolution (P < 0·001). Similarly, for surgeons, every 1-point increase in NOTSS score was associated with a decrease of 64·81 (26·01 to 103·60) s in time to crisis resolution in the haemorrhage scenario (P = 0·001); however, this did not apply to the difficult airway scenario. Non-technical skills scores were lower during the crisis phase of the scenarios than those measured before the crisis for both surgeons and anaesthetists. A higher level of NTS of surgeons and anaesthetists led to quicker crisis resolution in a simulated operating theatre environment. © 2017 BJS Society Ltd Published by John Wiley & Sons Ltd.

Do technical skills correlate with non-technical skills in crisis resource management: a simulation study.

PubMed

Riem, N; Boet, S; Bould, M D; Tavares, W; Naik, V N

2012-11-01

Both technical skills (TS) and non-technical skills (NTS) are key to ensuring patient safety in acute care practice and effective crisis management. These skills are often taught and assessed separately. We hypothesized that TS and NTS are not independent of each other, and we aimed to evaluate the relationship between TS and NTS during a simulated intraoperative crisis scenario. This study was a retrospective analysis of performances from a previously published work. After institutional ethics approval, 50 anaesthesiology residents managed a simulated crisis scenario of an intraoperative cardiac arrest secondary to a malignant arrhythmia. We used a modified Delphi approach to design a TS checklist, specific for the management of a malignant arrhythmia requiring defibrillation. All scenarios were recorded. Each performance was analysed by four independent experts. For each performance, two experts independently rated the technical performance using the TS checklist, and two other experts independently rated NTS using the Anaesthetists' Non-Technical Skills score. TS and NTS were significantly correlated to each other (r=0.45, P<0.05). During a simulated 5 min resuscitation requiring crisis resource management, our results indicate that TS and NTS are related to one another. This research provides the basis for future studies evaluating the nature of this relationship, the influence of NTS training on the performance of TS, and to determine whether NTS are generic and transferrable between crises that require different TS.

Developing Professional Skills in Undergraduate Engineering Students through Cocurricular Involvement

ERIC Educational Resources Information Center

Fisher, Dara R.; Bagiati, Aikaterini; Sarma, Sanjay

2017-01-01

As nations have sought to keep pace with rapid technological innovation, governments have renewed their focus on science, technology, engineering, and mathematics (STEM) education, with emphasis on developing both technical and non-technical skills in STEM students. This article examines which engineering-relevant skills may be developed by…

Build It and They Will Come: Addressing the Problem of Declining Entry-Level Skills.

ERIC Educational Resources Information Center

Koontz, Paul

2000-01-01

The growing gap between the skills of the work force and the technical requirements of today's jobs have reemphasized the need to transform the educational system to provide the solid academic and technical skills required by the jobs of today and tomorrow. (Author)

Attracting Cutting-Edge Skills Through Reserve Component Participation

DTIC Science & Technology

2003-01-01

specific recruitment pool of faculty and students within these institutions who possess the state-of-the- art science and technical skills or the most...identify a specific recruitment pool of faculty and students within these institutions who possess the state-of-the- art science and technical skills or

Workplace Skills in Practice. Case Studies of Technical Work.

ERIC Educational Resources Information Center

Stasz, Cathleen; And Others

A study was conducted to explore skills and work-related dispositions in technical work. It used a sociocultural approach to examine skills in seven target jobs in worksites representing diverse industries--health care, traffic management, transportation, and semiconductor manufacturing. It explored employers' strategies for obtaining the skills…

Enhancing non-technical skills by a multidisciplinary engineering summer school

NASA Astrophysics Data System (ADS)

Larsen, Peter Gorm; Kristiansen, Erik Lasse; Bennedsen, Jens; Bjerge, Kim

2017-11-01

In general engineering studies focus on the technical skills in their own discipline. However, in their subsequent industrial careers, a significant portion of their time needs to be devoted to non-technical skills. In addition, in an increasingly globalised world collaboration in teams across cultures and disciplines is paramount to the creation of new and innovative products. In order to enhance the non-technical skills for groups of engineering students a series of innovation courses has been arranged and delivered in close collaboration with an industrial company (Bang & Olufsen). These courses have been organised as summer schools called 'Conceptual Design and Development of Innovative Products' (CD-DIP) and delivered outside the usual educational environment. In order to explore the impact of this single course, we have conducted a study among the students participating from 2007 to 2013. This has been carried out both qualitatively using interviews with selected students as well as quantitatively using a survey. The results are outstanding in demonstrating that the non-technical skills obtained in this single course have been of high value for a large portion of the students' subsequent professional life.

Developing Technical Skill Assessments

ERIC Educational Resources Information Center

Hyslop, Alisha

2009-01-01

One of the biggest challenges facing the career and technical education (CTE) community as it works to implement the 2006 Perkins Act is responding to more rigorous requirements for reporting on CTE students' technical skill attainment. The U.S. Department of Education suggested in non-regulatory guidance that states and locals use the number of…

Environmental engineering education: examples of accreditation and quality assurance

NASA Astrophysics Data System (ADS)

Caporali, E.; Catelani, M.; Manfrida, G.; Valdiserri, J.

2013-12-01

Environmental engineers respond to the challenges posed by a growing population, intensifying land-use pressures, natural resources exploitation as well as rapidly evolving technology. The environmental engineer must develop technically sound solutions within the framework of maintaining or improving environmental quality, complying with public policy, and optimizing the utilization of resources. The engineer provides system and component design, serves as a technical advisor in policy making and legal deliberations, develops management schemes for resources, and provides technical evaluations of systems. Through the current work of environmental engineers, individuals and businesses are able to understand how to coordinate society's interaction with the environment. There will always be a need for engineers who are able to integrate the latest technologies into systems to respond to the needs for food and energy while protecting natural resources. In general, the environment-related challenges and problems need to be faced at global level, leading to the globalization of the engineering profession which requires not only the capacity to communicate in a common technical language, but also the assurance of an adequate and common level of technical competences, knowledge and understanding. In this framework, the Europe-based EUR ACE (European Accreditation of Engineering Programmes) system, currently operated by ENAEE - European Network for Accreditation of Engineering Education can represent the proper framework and accreditation system in order to provide a set of measures to assess the quality of engineering degree programmes in Europe and abroad. The application of the accreditation model EUR-ACE, and of the National Italian Degree Courses Accreditation System, promoted by the Italian National Agency for the Evaluation of Universities and Research Institutes (ANVUR), to the Environmental Engineering Degree Courses at the University of Firenze is presented. In particular, the accreditation models of the multidisciplinary first cycle degree in Civil, Building and Environmental Engineering and the more specific second cycle degree in Environmental Engineering are discussed. The critical issues to assure the quality and the status of environmental engineering graduates, in terms of applying knowledge capacities and technical innovative competences, according to the more engineering focused EUR-ACE skill descriptors as well as with respect to the Dublin descriptors, at local and global scale are also compared. The involvement of the professional working world in the definition of goals in skills, of typical expectations of achievements and abilities is also described. The system for educating engineers in communicating knowledge and understanding, making informed judgments and choices, capacities to lifelong learning is in addition assessed. The promotion of innovative aspects related with the environmental engineering education, and of the role that science and technology could play in environmental engineering education is also taken into consideration.

The Development of a Novel Perfused Cadaver Model With Dynamic Vital Sign Regulation and Real-World Scenarios to Teach Surgical Skills and Error Management.

PubMed

Minneti, Michael; Baker, Craig J; Sullivan, Maura E

The landscape of graduate medical education has changed dramatically over the past decade and the traditional apprenticeship model has undergone scrutiny and modifications. The mandate of the 80-hour work-week, the introduction of integrated residency programs, increased global awareness about patient safety along with financial constraints have spurred changes in graduate educational practices. In addition, new technologies, more complex procedures, and a host of external constraints have changed where and how we teach technical and procedural skills. Simulation-based training has been embraced by the surgical community and has quickly become an essential component of most residency programs as a method to add efficacy to the traditional learning model. The purpose of this paper is twofold: (1) to describe the development of a perfused cadaver model with dynamic vital sign regulation, and (2) to assess the impact of a curriculum using this model and real world scenarios to teach surgical skills and error management. By providing a realistic training environment our aim is to enhance the acquisition of surgical skills and provide a more thorough assessment of resident performance. Twenty-six learners participated in the scenarios. Qualitative data showed that participants felt that the simulation model was realistic, and that participating in the scenarios helped them gain new knowledge, learn new surgical techniques and increase their confidence performing the skill in a clinical setting. Identifying the importance of both technical and nontechnical skills in surgical education has hastened the need for more realistic simulators and environments in which they are placed. Team members should be able to interact in ways that allow for a global display of their skills thus helping to provide a more comprehensive assessment by faculty and learners. Copyright © 2017 Association of Program Directors in Surgery. Published by Elsevier Inc. All rights reserved.

Use of technical skills and medical devices among new registered nurses: A questionnaire study.

PubMed

Ewertsson, Mona; Gustafsson, Margareta; Blomberg, Karin; Holmström, Inger K; Allvin, Renée

2015-12-01

One comprehensive part of nursing practice is performing technical skills and handling of medical equipment. This might be challenging for new registered nurses (RNs) to do in patient-safe way. The aim of this study was to describe and compare the extent to which new RNs perform various technical skills and handle medical devices in different settings, and to investigate their possibility for continued learning in this respect. A further aim was to describe their perceptions of incident reporting related to technical skills and medical devices. A cross-sectional study with descriptive and comparative design. RNs who recently graduated from a nursing programme at three Swedish universities and had worked as a RN for up to 1 year were included in the study (n=113, response rate 57%). Data were collected by means of a postal questionnaire. Half of the RNs reported that they performed several of the listed tasks every day or every week, regardless of workplace. These tasks were most frequently performed in surgical departments. The majority of the participants (76%) stated a need of continued practical training. However, less than half of them (48%) had access to a training environment. Several participants (43%) had been involved in incidents related to technical skills or medical devices, which were not always reported. Nearly a third of the participants (31%) did not use the existing guidelines when performing technical skills, and reflection on performance was uncommon. This study highlights the importance of shared responsibilities between nurse educators and health care employers to provide learning opportunities for new RNs in technical skills, to maintain patient safety. To increase the safety culture where nursing students and new RNs understand the importance of using evidence-based guidelines and taking a reflective approach in the performance of technical tasks is needed. Copyright © 2015 Elsevier Ltd. All rights reserved.

The use of a checklist improves anaesthesiologists' technical and non-technical performance for simulated malignant hyperthermia management.

PubMed

Hardy, Jean-Baptiste; Gouin, Antoine; Damm, Cédric; Compère, Vincent; Veber, Benoît; Dureuil, Bertrand

2018-02-01

Anaesthesiologists may occasionally manage life-threatening operating room (OR) emergencies. Managing OR emergencies implies real-time analysis of often complicated situations, prompt medical knowledge retrieval, coordinated teamwork and effective decision making in stressful settings. Checklists are recommended to improve performance and reduce the risk of medical errors. This study aimed to assess the usefulness of the French Society of Anaesthesia and Intensive Care's (SFAR) "Malignant Hyperthermia" (MH) checklist on a simulated episode of MH crisis and management thereof by registered anesthesiologists. Twenty-four anaesthesiologists were allocated to 2 groups (checklist and control). Their technical performance in adherence with the SFAR guidelines was assessed by a 30-point score and their non-technical performance was assessed by the Anaesthetists' Non-Technical Skills (ANTS) score. Every task completion was assessed independently. Data are shown as median (first-third quartiles). Anaesthesiologists in the checklist group had higher technical performance scores (24/30 (21.5-25) vs 18/30 (15.5-19.5), P=0.002) and ANTS scores (56.5/60 (47.5-58) vs 48.5/60 (41-50.5), P=0.024). They administered the complete initial dose of dantrolene (2mg/kg) more quickly (15.7 minutes [13.9-18.3] vs 22.4 minutes [18.6-25]) than the control group (P=0.017). However, anaesthesiologists deemed the usability of the checklist to be perfectible. Registered anaesthesiologists' use of the MH checklist during a simulation session widely improved their adherence to guidelines and non-technical skills. This study strongly suggests the benefit of checklist tools for emergency management. Notwithstanding, better awareness and training for anaesthesiologists could further improve the use of this tool. Copyright © 2017 Société française d'anesthésie et de réanimation (Sfar). Published by Elsevier Masson SAS. All rights reserved.

A National Survey on Teaching and Assessing Technical Proficiency in Vascular Surgery in Canada.

PubMed

Drudi, Laura; Hossain, Sajjid; Mackenzie, Kent S; Corriveau, Marc-Michel; Abraham, Cherrie Z; Obrand, Daniel I; Vassiliou, Melina; Gill, Heather; Steinmetz, Oren K

2016-05-01

This survey aims to explore trainees' perspectives on how Canadian vascular surgery training programs are using simulation in teaching and assessing technical skills through a cross-sectional national survey. A 10-min online questionnaire was sent to Program Directors of Canada's Royal College of Physicians and Surgeons' of Canada approved training programs in vascular surgery. This survey was distributed among residents and fellows who were studying in the 2013-2014 academic year. Twenty-eight (58%) of the 48 Canadian vascular surgery trainees completed the survey. A total of 68% of the respondents were part of the 0 + 5 integrated vascular surgery training program. The use of simulation in the assessment of technical skills at the beginning of training was reported by only 3 (11%) respondents, whereas 43% reported that simulation was used in their programs in the assessment of technical skills at some time during their training. Training programs most often provided simulation as a method of teaching and learning endovascular abdominal aortic or thoracic aneurysm repair (64%). Furthermore, 96% of trainees reported the most common resource to learn and enhance technical skills was dialog with vascular surgery staff. Surveyed vascular surgery trainees in Canada report that simulation is rarely used as a tool to assess baseline technical skills at the beginning of training. Less than half of surveyed trainees in vascular surgery programs in Canada report that simulation is being used for skills acquisition. Currently, in Canadian training programs, simulation is most commonly used to teach endovascular skills. Copyright © 2016 Elsevier Inc. All rights reserved.

Educating for action: Aligning skills with policies for sustainable development in the Danube river basin.

PubMed

Irvine, Kenneth; Weigelhofer, Gabriele; Popescu, Ioana; Pfeiffer, Ellen; Păun, Andrei; Drobot, Radu; Gettel, Gretchen; Staska, Bernadette; Stanica, Adrian; Hein, Thomas; Habersack, Helmut

2016-02-01

Sustainable river basin management depends on knowledge, skills and education. The DANCERS project set out to identify feasible options for achieving education for sustainable water management across the Danube river basin, and its integration with broader education and economic development. The study traced the historic, regulatory and educational landscape of water management in the basin, contrasting it with the complex political decision-making, data-heavy decision support, learning-centred collaboration, and information-based participation that are all inherent components of Integrated Water Resource Management (IWRM). While there is a wide range of educational opportunities and mobility schemes available to individuals, there is no coherent network related to training in water management and sustainable development in the study region. Progress in addressing the multi-layered environmental challenges within the basin requires further aligning of economic, environmental and educational policies, advancing the EU Bologna Process across the region, and the development of dedicated training programmes that combine technical and relational skills. The DANCERS project identified key short and medium term needs for education and research to support progressive adoption of sustainable development, and the necessary dialogue across the public and private sectors to align policies. These include the development of new education networks for masters and PhD programmes, including joint programmes; improved access to technical training and life-long learning programmes for skills development; developing formalized and certified competency structures and associated accreditation of institutions where such skilled individuals work; and developing a co-ordinated research infrastructure and pan-basin programme for research for water management and sustainable development. Copyright © 2015 Elsevier B.V. All rights reserved.

Development of perceived competence, tactical skills, motivation, technical skills, and speed and agility in young soccer players.

PubMed

Forsman, Hannele; Gråstén, Arto; Blomqvist, Minna; Davids, Keith; Liukkonen, Jarmo; Konttinen, Niilo

2016-07-01

The objective of this 1-year, longitudinal study was to examine the development of perceived competence, tactical skills, motivation, technical skills, and speed and agility characteristics of young Finnish soccer players. We also examined associations between latent growth models of perceived competence and other recorded variables. Participants were 288 competitive male soccer players ranging from 12 to 14 years (12.7 ± 0.6) from 16 soccer clubs. Players completed the self-assessments of perceived competence, tactical skills, and motivation, and participated in technical, and speed and agility tests. Results of this study showed that players' levels of perceived competence, tactical skills, motivation, technical skills, and speed and agility characteristics remained relatively high and stable across the period of 1 year. Positive relationships were found between these levels and changes in perceived competence and motivation, and levels of perceived competence and speed and agility characteristics. Together these results illustrate the multi-dimensional nature of talent development processes in soccer. Moreover, it seems crucial in coaching to support the development of perceived competence and motivation in young soccer players and that it might be even more important in later maturing players.

Integrated Basic Education and Skills Training (I-BEST). Washington's Community and Technical Colleges

ERIC Educational Resources Information Center

Washington State Board for Community and Technical Colleges, 2014

2014-01-01

Washington's Integrated Basic Education and Skills Training Program (I-BEST) quickly teaches students literacy, work, and college-readiness skills so they can move through school and into living wage jobs faster. Pioneered by Washington's community and technical colleges, I-BEST uses a team-teaching approach to combine college-readiness classes…

Gateway to the Future. Skill Standards for the Bioscience Industry for Technical Workers in Pharmaceutical Companies, Biotechnology Companies, and Clinical Laboratories.

ERIC Educational Resources Information Center

Education Development Center, Inc., Newton, MA.

The Bioscience Industry Skills Standards Project (BISSP) is developing national, voluntary skill standards for technical jobs in biotechnology and pharmaceutical companies and clinical laboratories in hospitals, universities, government, and independent settings. Research with employees and educators has pinpointed three issues underscoring the…

Exposing Hidden Relations: Storytelling, Pedagogy, and the Study of Policy

ERIC Educational Resources Information Center

Moore, Kristen

2013-01-01

Within a Technical Communication classroom, policywork has been used to teach students the vital discursive and conceptual skills valued by technical fields. However, given the move of technical communicators into the public sphere, these skills can and should be expanded to include diverse practices and modes of thought. As such, this article…

Learning Computing Topics in Undergraduate Information Systems Courses: Managing Perceived Difficulty

ERIC Educational Resources Information Center

Wall, Jeffrey D.; Knapp, Janice

2014-01-01

Learning technical computing skills is increasingly important in our technology driven society. However, learning technical skills in information systems (IS) courses can be difficult. More than 20 percent of students in some technical courses may dropout or fail. Unfortunately, little is known about students' perceptions of the difficulty of…

The Intra-Rater Reliability of Nine Content-Validated Technical Skill Assessment Instruments (TSAI) for Athletic Taping Skills

ERIC Educational Resources Information Center

Lagumen, Niko G.; Butterwick, Dale J.; Paskevich, David M.; Fung, Tak S.; Donnon, Tyrone L.

2008-01-01

Objective: To establish the intra-rater reliability of nine content-validated Technical Skill Assessment Instruments (TSAI) for the skills of athletic taping. Setting: University of Calgary. Subjects: Canadian Certified Athletic Therapists, CAT(C), with a mean ± SD of 9.6 ± 10.8 years as a CAT(C), 7.8 ± 10.9 years as a Supervisory Athletic…

Too much small talk? Medical students' pelvic examination skills falter with pleasant patients.

PubMed

Posner, Glenn D; Hamstra, Stanley J

2013-12-01

The competent performance of a female pelvic examination requires both technical proficiency and superlative communication skills. However, the ideal medium with which to assess these skills remains to be elucidated. Part-task trainers (PTTs) offer an effective and affordable means of testing technical skills, but may not allow students to demonstrate their communication skills. Hybrids involving standardised patients (SPs) (SP-PTT) offer a more realistic assessment of communication, but students may feel awkward when examining the female genitalia. The objective of this study was to compare the use of PTTs with that of SP-PTT hybrids in the assessment of technical and communication skills in the female pelvic examination. A total of 145 medical students were randomised to one of three conditions during their summative objective structured clinical examination (OSCE) at the completion of clerkship. Students performed the female pelvic examination on: (i) a PTT alone ('plastic' condition); (ii) an SP-PTT hybrid with an SP who did not engage in any superfluous conversation ('perfunctory' condition), or (iii) an SP-PTT hybrid with an SP who was trained to offer small talk and banter, which was judged to better reflect the typical doctor-patient interaction ('pleasant' condition). Communication skills did not differ significantly among the three groups (p = 0.354). There was a significant difference among groups in technical skills scores (p = 0.0018). Students in the 'plastic' condition performed best, followed by those in the 'perfunctory' and 'pleasant' conditions, respectively. Medical students demonstrate equivalent communication skills whether they work with a PTT or an SP-PTT hybrid, but their technical skills suffer in the presence of an SP. Working with the PTT alone does not appear to disadvantage students in terms of communication skills, but may offer better conditions for performing technical aspects of the procedure. Whether the 'plastic patient' is the most meaningful and valid means of predicting overall competence in the clinical setting is still a matter for debate. © 2013 John Wiley & Sons Ltd.

Chief Resident Immersion Training in the Care of Older Adults: A Successful National Replication of an Interspecialty Educational Intervention.

PubMed

Levine, Sharon A; Chao, Serena H; Caruso, Lisa B; Jackson, Angela H; Russell, Matthew L; Young, Megan E; Brett, Belle

2018-06-05

Nongeriatricians must acquire skills and knowledge in geriatric medicine to ensure coordinated care of older adults' complex conditions by interspecialty and interprofessional teams. Chief residents (CRs) are an ideal target for an educational intervention. This study examined whether the Boston Medical Center (BMC) Chief Resident Immersion Training (CRIT) in the Care of Older Adults was replicable at diverse medical institutions. Between 2008 and 2010, 12 institutions in 11 states received funding, technical support, and a common program model. Each implemented 2.5-day CRITs, consisting of a patient case, geriatrics-related lectures, CR leadership sessions, action project planning, and networking time. Site faculty conducted 21 CRITs for 295 CRs representing 28 specialties. CRs completed knowledge pre- and post-tests, and self-report baseline and 6-month follow-up surveys. Outcome measures were change in pre- and post-test score; and change from baseline to six-months in self-reported surveys. Response rate for CRs was 99% (n = 293) for the pre-post tests and 78% (n = 231) for matchable baseline and six-month follow-up surveys. Participants' knowledge increased from 6.32 to 8.39 (P < .001) averaged from 12 questions. CRs' self-reported ability to apply clinical problem-solving skills to older patients (P < .001), number of geriatrics topics taught (P < .001), frequency of geriatrician consultations s (P = .017), confidence in leadership skills (P < .001), and confidence to conduct CR work (P < .001) increased from baseline to follow-up. CRIT is an innovative way to give non-geriatricians knowledge and skills to treat complex older patients.Written work prepared by employees of the Federal Government as part of their official duties is, under the U.S. Copyright Act, a "work of the United States Government" for which copyright protection under Title 17 of the United States Code is not available. As such, copyright does not extend to the contributions of employees of the Federal Government.

'I can actually talk to them now': qualitative results of an educational intervention for emergency nurses caring for clients who self-injure.

PubMed

McAllister, Margaret; Moyle, Wendy; Billett, Stephen; Zimmer-Gembeck, Melanie

2009-10-01

This Australian study evaluated the effectiveness of a solution-focused education intervention in extending and improving emergency nursing responses to patients who present because of self-injury. Emergency nurses commonly report lack of training and feeling unskilled in managing people who present because of self-harm. Most educational interventions have provided content knowledge, yet rarely have they focused on conveying the value of health promotion strategies such as proactive skills and coping strategies. A mixed method pretest-posttest group design was used. Nurses (n = 36) were interviewed to examine differences in professional identity, awareness of self-injury and clinical reasoning. The qualitative results are presented in this paper and these showed improvements in knowledge and understanding of self-harm, self-belief in nurses' capacity to positively influence clients and the value of health promotion skills. The intervention produced a positive attitudinal shift towards clients and an expressed intention to act in ways that were more person-centred and change oriented. The solution-focused education intervention appears to show promise as an intervention for enabling nurses to value their unique contribution to providing a health service that is more proactive and health-promoting. Interactive education bringing psychosocial skills to technical nursing staff builds confidence, competence and more person-focused care.

[Working as a clinician-scientist in psychosomatic medicine: status, skills and research productivity].

PubMed

Hartmann, Mechthild; Wild, Beate; Herzog, Wolfgang; Nikendei, Christoph; Zipfel, Stephan; Henningsen, Peter; Löwe, Bernd

2008-06-01

Even though there is a high need of clinical research for the medical and psychotherapeutic practice in Germany, the interest in clinical research seems to be decreasing. The aim of this study was to assess the circumstances under which clinical research in psychosocial medicine is performed and to identify opportunities for improvement. n = 53 residents of the departments for Psychosomatic Medicine of the University Hospitals of Heidelberg and Tübingen and of the Technical University of Munich were asked about their research activities, their subjective research skills, and their productivity in clinical psychosocial research. In addition, objective research knowledge was investigated using a multiple-choice test. Both, subjective research skills and objective research knowledge were relatively low. The percentage of correct answers in the multiple choice test was 33 %. Subjective problems were predominately stated regarding "biostatistics" and "study design". In terms of research productivity, 33 % of residents had published as first authors of an original journal article, and 12 % had submitted a successful grant proposal. Altogether, there is a high need of training in the field of clinical psychosomatic research. We are presenting a training model that is adapted to the conditions of young clinicians and that addresses both general clinical research and specific psychosocial clinical research.

Examining why ethics is taught to veterinary students: a qualitative study of veterinary educators' perspectives.

PubMed

Magalhães-Sant'Ana, Manuel; Lassen, Jesper; Millar, Kate M; Sandøe, Peter; Olsson, I Anna S

2014-01-01

Although it is widely agreed that veterinary students need to be introduced to ethics, there is limited empirical research investigating the reasons why veterinary ethics is being taught. This study presents the first extensive investigation into the reasons for teaching veterinary ethics and reports data collected in semi-structured interviews with educators involved in teaching undergraduate veterinary ethics at three European schools: the University of Copenhagen, the University of Nottingham, and the Technical University of Lisbon (curricular year 2010-2011). The content of the interview transcripts were analyzed using Toulmin's argumentative model. Ten objectives in teaching veterinary ethics were identified, which can be grouped into four overarching themes: ethical awareness, ethical knowledge, ethical skills, and individual and professional qualities. These objectives include recognizing values and ethical viewpoints, identifying norms and regulations, developing skills of communication and decision making, and contributing to a professional identity. Whereas many of the objectives complement each other, there is tension between the view that ethics teaching should promote knowledge of professional rules and the view that ethics teaching should emphasize critical reasoning skills. The wide range of objectives and the possible tensions between them highlight the challenges faced by educators as they attempt to prioritize among these goals of ethics teaching within a crowded veterinary curriculum.

The Rocket Engine Advancement Program 2 (REAP2)

NASA Technical Reports Server (NTRS)

Harper, Brent (Technical Monitor); Hawk, Clark W.

2004-01-01

The Rocket Engine Advancement Program (REAP) 2 program is being conducted by a university propulsion consortium consisting of the University of Alabama in Huntsville, Penn State University, Purdue University, Tuskegee University and Auburn University. It has been created to bring their combined skills to bear on liquid rocket combustion stability and thrust chamber cooling. The research team involves well established and known researchers in the propulsion community. The cure team provides the knowledge base, research skills, and commitment to achieve an immediate and continuing impact on present and future propulsion issues. through integrated research teams composed of analysts, diagnosticians, and experimentalists working together in an integrated multi-disciplinary program. This paper provides an overview of the program, its objectives and technical approaches. Research on combustion instability and thrust chamber cooling are being accomplished

Medical Teachers' Humanistic Perspective on Pedagogy: A New Starting Point for Faculty Development.

PubMed

Barrett, Jenny; Yates, Lyn; McColl, Geoffrey

2016-01-01

This study investigated the perspectives on pedagogy held by medical teachers in hospitals. The teachers were interviewed after they had been observed in both clinical and classroom settings. The study showed the teachers' reliance on the relational aspects of pedagogy more than on technical pedagogical knowledge. Teachers referred to their aims and approaches as "interactive," but this does not refer to any deliberate pedagogical design or acts. Asking questions was the technique used most commonly but not always skillfully, and they cited influences from the past rather than the present or the future. This research suggests the pedagogic approach of these medical teachers is "humanistic." It emphasizes personal and interpersonal factors, meaningful learning, and the affective, as well as cognitive aspects of clinical knowledge. It also captures a commitment to nonthreatening, nonhumiliating environments. Acknowledgment of this particular pedagogical perspective, it is argued, could better connect the health professional teachers with the education and development missions of universities, professional bodies, and governments. The teachers' expressed values and goals offer a new starting point for faculty development. Their reliance on the relational over the technical and on their own biographical experience, could be more respectfully valued and addressed to advance a more productive balance with the technical pedagogical elements that often concern educationalists, researchers, and administrators.

Housing, health and master planning: rules of engagement.

PubMed

Harris, P; Haigh, F; Thornell, M; Molloy, L; Sainsbury, P

2014-04-01

Knowledge about health focussed policy collaboration to date has been either tactical or technical. This article focusses on both technical and tactical issues to describe the experience of cross-sectoral collaboration between health and housing stakeholders across the life of a housing master plan, including but not limited to a health impact assessment (HIA). A single explanatory case study of collaboration on a master plan to regenerate a deprived housing estate in Western Sydney was developed to explain why and how the collaboration worked or did not work. Data collection included stakeholder interviews, document review, and reflections by the health team. Following a realist approach, data was analysed against established public policy theory dimensions. Tactically we did not know what we were doing. Despite our technical knowledge and skills with health focussed processes, particularly HIA, we failed to appreciate complexities inherent in master planning. This limited our ability to provide information at the right points. Eventually however the HIA did provide substantive connections between the master plan and health. We use our analysis to develop technical and tactical rules of engagement for future cross-sectoral collaboration. This case study from the field provides insight for future health focussed policy collaboration. We demonstrate the technical and tactical requirements for future intersectoral policy and planning collaborations, including HIAs, with the housing sector on master planning. The experience also suggested how HIAs can be conducted flexibly alongside policy development rather than at a specific point after a policy is drafted. Copyright © 2014 The Royal Society for Public Health. All rights reserved.

Aiming for excellence - A simulation-based study on adapting and testing an instrument for developing non-technical skills in Norwegian student nurse anaesthetists.

PubMed

Flynn, Fiona M; Sandaker, Kjersti; Ballangrud, Randi

2017-01-01

There is increasing focus on building safety into anaesthesia practice, with excellence in anaesthesia as an aspirational goal. Non-technical skills are an important factor in excellence and improved patient safety, though there have been few systematic attempts at integrating them into anaesthesia nursing education. This study aimed to test the reliability of NANTS-no, a specially adapted behavioural marker system for nurse anaesthetists in Norway, and explore the development of non-technical skills in student nurse anaesthetists. The pre-test post-test design incorporated a 10-week simulation-based programme, where non-technical skills in 14 student nurse anaesthetists were rated on three different occasions during high-fidelity simulation, before and after taking part in a training course. NANTS-no demonstrated high overall inter-rater reliability (ICC = 0.91), high test-retest reliability (ICC = 0.94) and good internal consistency (Cronbach's α of 0.85-0.92). A significant improvement was demonstrated across all categories of non-technical skills, with greatest improvements between the first and third and second and third sessions. There was also a significant improvement in two categories between the first and second sessions. NANTS-no is therefore suitable for assessing non-technical skills during simulation training in anaesthesia nursing education. More research is needed to validate its use in clinical practice. Copyright © 2016 Elsevier Ltd. All rights reserved.

Training opportunities and the role of virtual reality simulation in acquisition of basic laparoscopic skills.

PubMed

Aggarwal, Rajesh; Balasundaram, Indran; Darzi, Ara

2008-03-01

Within the past decade, there has been increasing interest in simulation-based devices for training and assessment of technical skills, especially for minimally invasive techniques such as laparoscopy. The aim of this study was to investigate the perceptions of senior and junior surgeons to virtual reality simulation within the context of current training opportunities for basic laparoscopic procedures. A postal questionnaire was sent to 245 consultants and their corresponding specialist registrar (SpR), detailing laparoscopic surgical practice and their knowledge and use of virtual reality (VR) surgical simulators. One hundred ninety-one (78%) consultants and 103(42%) SpRs returned questionnaires; 16%(10/61) of junior SpRs (year 1-4) had performed more than 50 laparoscopic cholecystectomies to date compared with 76% (32/42) of senior SpRs (year 5-6) (P < 0.001); 90% (55/61) of junior SpRs and 67% (28/42) of senior SpRs were keen to augment their training with VR (P = 0.007); 81% (238/294) of all surgeons agreed that VR has a useful role in the laparoscopic surgical training curriculum. There is a lack of experience in index laparoscopic cases of junior SpRs, and laparoscopic VR simulation is recognized as a useful mode of practice to acquire technical skills. This should encourage surgical program directors to drive the integration of simulation-based training into the surgical curriculum.

The Transition into the Workforce by Early-Career Geoscientists, a Preliminary Investigation

NASA Astrophysics Data System (ADS)

Wilson, C. E.; Keane, C.

2017-12-01

The American Geosciences Institute's Geoscience Student Exit Survey asks recent graduates about their immediate plans after graduation. Though some respondents indicate their employment or continuing education intention, many of the respondents are still in the process of looking for a job in the geosciences. Recent discussions about geoscience workforce development have focused on the critical technical and professional skills that graduates need to be successful in the workforce, but there is little data about employment success and skills development as early-career geoscientists. AGI developed a short preliminary survey to follow up with past participants in AGI's Exit Survey investigating their career path, their skills development after entering the workforce, and their opinions on skills and knowledge they wished they had prior to entering the workforce. The results from this survey will begin to indicate the occupation availability for early-career geoscientists, the continuing education completed by these recent graduates, and the possible attrition away from the geoscience workforce. This presentation presents the results from this short survey and the implications for further research in this area of workforce development and preparation.

Quantitative Comparisons to Promote Inquiry in the Introductory Physics Lab

NASA Astrophysics Data System (ADS)

Holmes, N. G.; Bonn, D. A.

2015-09-01

In a recent report, the American Association of Physics Teachers has developed an updated set of recommendations for curriculum of undergraduate physics labs. This document focuses on six major themes: constructing knowledge, modeling, designing experiments, developing technical and practical laboratory skills, analyzing and visualizing data, and communicating physics. These themes all tie together as a set of practical skills in scientific measurement, analysis, and experimentation. In addition to teaching students how to use these skills, it is important for students to know when to use them so that they can use them autonomously. This requires, especially in the case of analytical skills, high levels of inquiry behaviors to reflect on data and iterate measurements, which students rarely do in lab experiments. Often, they perform lab experiments in a plug-and-chug frame, procedurally completing each activity with little to no sensemaking. An emphasis on obtaining true theoretical values or agreement on individual measurements also reinforces inauthentic behaviors such as retroactively inflating measurement uncertainties. This paper aims to offer a relatively simple pedagogical framework for engaging students authentically in experimentation and inquiry in physics labs.