Optimal distribution of medical backpacks and health surveillance assistants in Malawi.

PubMed

Kunkel, Amber G; Van Itallie, Elizabeth S; Wu, Duo

2014-09-01

Despite recent progress, Malawi continues to perform poorly on key health indicators such as child mortality and life expectancy. These problems are exacerbated by a severe lack of access to health care. Health Surveillance Assistants (HSAs) help bridge this gap by providing community-level access to basic health care services. However, the success of these HSAs is limited by a lack of supplies and long distances between HSAs and patients. To address this issue, we used large-scale weighted p-median and capacitated facility location problems to create a scalable, three-tiered plan for optimal allocation of HSAs, HSA designated medical backpacks, and backpack resupply centers. Our analysis uses real data on the location and characteristics of hospitals, health centers, and the general population. In addition to offering specific recommendations for HSA, backpack, and resupply center locations, it provides general insights into the scope of the proposed HSA backpack program scale-up. In particular, it demonstrates the importance of local health centers to the resupply network. The proposed assignments are robust to changes in the underlying population structure, and could significantly improve access to medical supplies for both HSAs and patients.

The Effects of Load Distribution and Gradient on Load Carriage

DTIC Science & Technology

2010-12-01

and injury (Knapik & Reynolds, 1997). Grimmer, Danise, Milanese, Pirunsan, & Trott (2002) studied postural responses to backpack loads in... Innovations in Load Carriage System Design and Evaluation” (1-7). Kingston, Canada, 27–29 June 2000. Bloom, D. & Woodhull-McNeal, A.P. (1987...Danise, B., Milanese, S., Pirunsan, U., & Trott , P. (2002). Adolescent standing postural response to backpack loads: a randomized controlled

Backpack-related musculoskeletal symptoms among Nigerian secondary school students.

PubMed

Hamzat, T K; Abdulkareem, T A; Akinyinka, O O; Fatoye, F A

2014-09-01

Musculoskeletal discomfort in schoolchildren is significantly related to the weight and mode of carrying backpack to school. Prevalence and patterns of musculoskeletal discomfort among Nigerian secondary school students carrying backpack was investigated. Systematic sampling technique was used in the selection of the participating junior secondary schools for this study. Participants comprised 1,785 students aged 10-15 years. Standardised Nordic musculoskeletal questionnaire was used to collect information on musculoskeletal pain. Backpack weight and participants' body weight were measured using a weighing scale. The visual analogue scale was used to assess pain intensity. Gender differences in backpack weight, backpack percentage and musculoskeletal discomfort were studied using Mann-Whitney U test; Kruskal-Wallis test was used to study the influence of backpack carrying style on musculoskeletal discomfort; and Spearman rho correlation to determine the relationships between backpack weight, backpack to body weight ratio, age and pain intensity. There were 882 boys and 903 girls recruited into the study. Shoulder pain was the most prevalent discomfort (63.5 %), and pain was significantly higher in girls (p = 0.013). There were weak relationships between pain intensity, body weight and backpack to body weight ratio (r range 0.433-0.442; p < 0.001), and a weak negative relationship between pain intensity and age [r = -0.135; p < 0.001; 95 % confidence interval (CI) -0.168, -0.075]. There was a strong relationship between backpack weight and age (r = 0.892; p < 0.001; 95 % CI -0.129, -0.013); however, there was a weak relationship between backpack weight and body weight (r = 0.136; p < 0.001). Prevalence of shoulder pain was high, particularly among the girls, in this sample. We suggest that factors other than the weight of backpack may predispose to musculoskeletal pain. Parents, teachers and clinicians can influence the mode of carrying backpack by secondary school students.

Impact of backpack load on ventilatory function among 9-12 year old Saudi girls.

PubMed

Al-Katheri, Abeer E

2013-12-01

To explore the backpack load as a percentile of body weight (BW) and its impact on ventilatory function including tidal volume (Vt), vital capacity (VC), forced vital capacity (FVC), forced expiratory volume in one second (FEV1), FEV1/FVC, peak expiratory flow (PEF), and maximum voluntary ventilation (MVV) among 9-12 year old Saudi girls. This is a prospective, experimental study of 91 Saudi girls aged between 9-12 years from primary schools in Riyadh, Saudi Arabia. The study took place in King Saud University, Riyadh, Saudi Arabia between April 2012 and May 2012. Ventilatory function was measured under 2 conditions: a free standing position without carrying a backpack, and while carrying a backpack. The backpack load observed was 13.8% of the BW, which is greater than the recommended limit (10% BW). All values of ventilatory function were significantly reduced after carrying the backpack (p<0.001) with the exception of FEV1/FVC (p>0.178). The reduction was observed even with the lowest backpack load (7.4% BW). A significant reduction was reported for most of the ventilatory function parameters while carrying the backpack. This reduction was apparent even with the least backpack load (7.4% BW) carried by the participants. This study recommends that the upper safe limit of backpack load carried by Saudi girls aged 9-12 years should be less than 7.4% of BW.

Time Series Analysis of Vegetation Change using Hyperspectral and Multispectral Data

DTIC Science & Technology

2012-09-01

rivers clogged with sediment” (Hartman, 2008). In addition, backpackers, campers, and skiers are in danger of being hit by falling trees. Mountain...information from hyperspectral data without a priori knowledge or requiring ground observations” (Kruse & Perry, 2009). Figure 16. Spectral...known endmembers and the scene spectra (Boardman & Kruse, 2011). Known endmembers come from analysts’ knowledge of an area in a scene, or from

Experimental verification and optimization of a linear electromagnetic energy harvesting device

NASA Astrophysics Data System (ADS)

Mullen, Christopher; Lee, Soobum

2017-04-01

Implementation of energy harvesting technology can provide a sustainable, remote power source for soldiers by reducing the battery weight and allowing them to stay in the field for longer periods of time. Among multiple energy conversion principles, electromagnetic induction can scavenge energy from wasted kinematic and vibration energy found from human motion. Hip displacement during human gait acts as a base excitation for an energy harvesting backpack system. The placement of a permanent magnet in this vibration environment results in relative motion of the magnet to the coil of copper wire, which induces an electric current. This current can be saved to a battery or capacitor bank installed on the backpack to be used to power electronic devices. The purpose of this research is to construct a reliable simulation model for an electromagnetic vibration energy harvester and use it for a multi-variable optimization algorithm to identify an optimal coil and magnet layout for highest power output. Key components of the coupled equations of motion such as the magnetic flux density and coil inductance are obtained using ANSYS multi-physics software or by measuring them. These components are fed into a harvester simulation model (e.g. coupled field equations of motion for the backpack harvester) that generates the electrical power output. The developed simulation model is verified with a case study including an experimental test. Then the optimal design parameters in the simulation model (e.g., magnet layout, coil width, outer coil diameter, external load resistance) are identified for maximum power. Results from this study will pave the way for a more efficient energy harvesting backpack while providing better insight into the efficiency of magnet and coil layout for electromagnetic applications.

Effects of Backpackers and Stock Use on Wilderness Water Quality in Sequoia & Kings Canyon National Parks

NASA Astrophysics Data System (ADS)

Forrester, H.; Roop, H. A.; Clow, D. W.

2011-12-01

Backpackers and pack animals, primarily horses and mules, may impair water quality in high-use zones of federally designated wilderness areas within Sequoia and Kings Canyon National Parks (SEKI). Impacts include erosion from trails, campsites and grazing sites, which increases suspended sediment concentrations and turbidity in downstream water bodies; and fecal matter that may be washed into surface waters during rainstorms or snowmelt periods. The fecal matter also may contain pathogenic bacteria such as Escherichia coli (E. coli) that can pose a health threat to humans. This study aims to establish a working methodology to document and assess effects from backpackers and stock use on physical, chemical and biological water quality parameters. In July 2010, monitoring stations were established within the high-use Crabtree Ranger Station zone. Sites were selected to represent high backpacker use, high pack-animal use, and background conditions. Monitoring stations are instrumented to continuously record water level, temperature, and turbidity and to automatically collect storm samples. Water samples are analyzed for dissolved and particulate nutrients, suspended sediment, and E. coli concentrations. Preliminary data show E. coli counts averaged 4.5 Colony Forming Units/100ml (CFUs) at the high backpacker use, 29.0 CFUs at the high-pack animal use, and 3.4 CFUs at the background sites. Results from the nutrients and suspended sediment analyses are pending. Data collection continued throughout the 2011 field season, with the objective of better quantifying differences in water quality among the study sites.

Performance of a Multifunctional Space Evaporator- Absorber-Radiator (SEAR)

NASA Technical Reports Server (NTRS)

Izenson, Michael G.; Chen, Weibo; Bue, Grant; Quinn, Gregory

2013-01-01

The Space Evaporator-Absorber-Radiator (SEAR) is a nonventing thermal control subsystem that combines a Space Water Membrane Evaporator (SWME) with a Lithium Chloride Absorber Radiator (LCAR). The LCAR is a heat pump radiator that absorbs water vapor produced in the SWME. Because of the very low water vapor pressure at equilibrium with lithium chloride solution, the LCAR can absorb water vapor at a temperature considerably higher than the SWME, enabling heat rejection by thermal radiation from a relatively small area radiator. Prior SEAR prototypes used a flexible LCAR that was designed to be installed on the outer surface of a portable life support system (PLSS) backpack. This paper describes a SEAR subsystem that incorporates a very compact LCAR. The compact, multifunctional LCAR is built in the form of thin panels that can also serve as the PLSS structural shell. We designed and assembled a 2 sq ft prototype LCAR based on this design and measured its performance in thermal vacuum tests when supplied with water vapor by a SWME. These tests validated our models for SEAR performance and showed that there is enough area available on the PLSS backpack shell to enable heat rejection from the LCAR.

School children's backpacks, back pain and back pathologies.

PubMed

Rodríguez-Oviedo, Paloma; Ruano-Ravina, Alberto; Pérez-Ríos, Mónica; García, Francisco Blanco; Gómez-Fernández, Dorotea; Fernández-Alonso, Anselmo; Carreira-Núñez, Isabel; García-Pacios, Pilar; Turiso, Javier

2012-08-01

To investigate whether backpack weight is associated with back pain and back pathology in school children. Cross-sectional study. Schools in Northern Galicia, Spain. All children aged 12-17. Backpack weight along with body mass index, age and gender. Back pain and back pathology. 1403 school children were analysed. Of these, 61.4% had backpacks exceeding 10% of their body weight. Those carrying the heaviest backpacks had a 50% higher risk of back pain (OR 1.50 CI 95% 1.06 to 2.12) and a 42% higher risk of back pathology, although this last result was not statistically significant (OR 1.42 CI 95% 0.86 to 2.32). Girls presented a higher risk of back pain compared with boys. Carrying backpacks increases the risk of back pain and possibly the risk of back pathology. The prevalence of school children carrying heavy backpacks is extremely high. Preventive and educational activities should be implemented in this age group.

The Effect of Backpack Load Carriage on the Kinetics and Kinematics of Ankle and Knee Joints During Uphill Walking.

PubMed

Lee, Jinkyu; Yoon, Yong-Jin; Shin, Choongsoo S

2017-12-01

The purpose of this study was to investigate the effect of load carriage on the kinematics and kinetics of the ankle and knee joints during uphill walking, including joint work, range of motion (ROM), and stance time. Fourteen males walked at a self-selected speed on an uphill (15°) slope wearing military boots and carrying a rifle in hand without a backpack (control condition) and with a backpack. The results showed that the stance time significantly decreased with backpack carriage (p < .05). The mediolateral impulse significantly increased with backpack carriage (p < .05). In the ankle joints, the inversion-eversion, and dorsi-plantar flexion ROM in the ankle joints increased with backpack carriage (p < .05). The greater dorsi-plantar flexion ROM with backpack carriage suggested 1 strategy for obtaining high plantar flexor power during uphill walking. The result of the increased mediolateral impulse and inversion-eversion ROM in the ankle joints indicated an increase in body instability caused by an elevated center of mass with backpack carriage during uphill walking. The decreased stance time indicated that an increase in walking speed could be a compensatory mechanism for reducing the instability of the body during uphill walking while carrying a heavy backpack.

Population attributable risk for chlamydia infection in a cohort of young international travellers (backpackers) and residents in Australia

PubMed Central

Guy, Rebecca; Donovan, Basil; McNulty, Anna

2011-01-01

Aim To estimate the population attributable risk (PAR) for Chlamydia trachomatis infection in young men and women in Sydney, Australia. Method Multivariate logistic regression was used to examine the association between demographic, sexual behaviour and other potential risk factors and chlamydia positivity in young (≤30 years) heterosexual international travellers (backpackers) and Australian residents attending a sexual health clinic. Point and interval estimates of PAR were calculated to quantify the proportion of chlamydia infections that can theoretically be prevented if a combination of risk factors is eliminated from a target population. Results In males, the PAR associated with inconsistent condom use in the past 3 months was 65% (95% CI 56% to 71%) in backpackers compared to 50% (95% CI 41% to 56%) in non-backpackers and the PAR associated with reporting three or more female sexual partners in the past 3 months was similar between male backpackers and non-backpackers (33% (95% CI 28% to 40%) and 36% (95% CI 32% to 41%), respectively). In females, the PAR associated with inconsistent condom use in the past 3 months was 51% (95% CI 42% to 59%) in backpackers compared to 41% (95% CI 31% to 51%) in non-backpackers, and the PAR associated with reporting three or more male sexual partners in the past 3 months was 14% (95% CI 11% to 18%) in backpackers compared to 30% (95% CI 25% to 37%) in non-backpackers. Conclusion These findings suggest that the largest number of chlamydia infections could be avoided by increasing condom use, particularly in backpackers. Reporting multiple partners was also associated with a large proportion of infections and the risk associated with this behaviour should be considered in health promotion strategies. PMID:22021720

Population attributable risk for chlamydia infection in a cohort of young international travellers (backpackers) and residents in Australia.

PubMed

Wand, Handan; Guy, Rebecca; Donovan, Basil; McNulty, Anna

2011-02-23

To estimate the population attributable risk (PAR) for Chlamydia trachomatis infection in young men and women in Sydney, Australia. Multivariate logistic regression was used to examine the association between demographic, sexual behaviour and other potential risk factors and chlamydia positivity in young (≤ 30 years) heterosexual international travellers (backpackers) and Australian residents attending a sexual health clinic. Point and interval estimates of PAR were calculated to quantify the proportion of chlamydia infections that can theoretically be prevented if a combination of risk factors is eliminated from a target population. In males, the PAR associated with inconsistent condom use in the past 3 months was 65% (95% CI 56% to 71%) in backpackers compared to 50% (95% CI 41% to 56%) in non-backpackers and the PAR associated with reporting three or more female sexual partners in the past 3 months was similar between male backpackers and non-backpackers (33% (95% CI 28% to 40%) and 36% (95% CI 32% to 41%), respectively). In females, the PAR associated with inconsistent condom use in the past 3 months was 51% (95% CI 42% to 59%) in backpackers compared to 41% (95% CI 31% to 51%) in non-backpackers, and the PAR associated with reporting three or more male sexual partners in the past 3 months was 14% (95% CI 11% to 18%) in backpackers compared to 30% (95% CI 25% to 37%) in non-backpackers. These findings suggest that the largest number of chlamydia infections could be avoided by increasing condom use, particularly in backpackers. Reporting multiple partners was also associated with a large proportion of infections and the risk associated with this behaviour should be considered in health promotion strategies.

A New TS Algorithm for Solving Low-Carbon Logistics Vehicle Routing Problem with Split Deliveries by Backpack-From a Green Operation Perspective.

PubMed

Xia, Yangkun; Fu, Zhuo; Tsai, Sang-Bing; Wang, Jiangtao

2018-05-10

In order to promote the development of low-carbon logistics and economize logistics distribution costs, the vehicle routing problem with split deliveries by backpack is studied. With the help of the model of classical capacitated vehicle routing problem, in this study, a form of discrete split deliveries was designed in which the customer demand can be split only by backpack. A double-objective mathematical model and the corresponding adaptive tabu search (TS) algorithm were constructed for solving this problem. By embedding the adaptive penalty mechanism, and adopting the random neighborhood selection strategy and reinitialization principle, the global optimization ability of the new algorithm was enhanced. Comparisons with the results in the literature show the effectiveness of the proposed algorithm. The proposed method can save the costs of low-carbon logistics and reduce carbon emissions, which is conducive to the sustainable development of low-carbon logistics.

The behaviour and sexual health of young international travellers (backpackers) in Australia.

PubMed

McNulty, A M; Egan, C; Wand, H; Donovan, B

2010-06-01

To study the demographics, risk behaviours and morbidity of young long-term international travellers (backpackers) attending a sexual health service in Sydney, Australia. Data on new patients were extracted from the Sydney Sexual Health Centre database for the period 1998 to 2006. The sexual risk behaviours and morbidity of the backpackers were compared with other patients of a similar age. The 5698 backpackers who attended the centre reported higher numbers of sexual partners (three or more partners in the past 3 months, 18% vs 12%, p<0.001) and a greater proportion drank alcohol at hazardous levels (22%) than the comparison group (9%, p<0.001). Rates of consistent (100%) condom use in the past 3 months were low in both backpackers (22%) and the comparison population (19%). Backpackers had higher rates of genital chlamydia infection (7% vs 5%, p<0.001) and reported higher rates of previous sexually transmitted infections (15% vs 10%, p<0.001). Backpackers should be a priority population for sexual health promotion and access to services.

Immediate responses to backpack carriage on postural angles in young adults: A crossover randomized self-controlled study with repeated measures.

PubMed

Abaraogu, Ukachukwu O; Ezenwankwo, Elochukwu F; Nwadilibe, Ijeoma B; Nwafor, Geoffrey C; Ugwuele, Bianca O; Uzoh, Pascal C; Ani, Ifunanya; Amarachineke, Kinsley; Atuma, Collins; Ewelunta, Obed

2017-01-01

Heavy backpacks have been associated with various postural changes and consequently musculoskeletal disorders. We evaluated the immediate responses of varying backpack loads on cranio-vertebral angle (CVA), sagittal shoulder angle (SSA) and trunk forward lean (TFL) of young adults between the ages of 18-25 years. This was a 3×3 cross over randomized controlled study with repeated measures among a convenience sample of young adults (n = 30; 50% male, 50% female). Each participant in a standing posture was assessed at four different loads: no backpack, carrying backpack of 5%, 10%, and 15% of body weight (BW). A sagittal photograph was taken of the area of the body corresponding to spinal angle during each of these test conditions to allow for later analysis of postural deviations. Comparisons of the mean deviations of the different postural angles from baseline and between test conditions were made using ANOVA at p≤0.05. Generally, there was a trend toward a decrease in the CVA and TFL with increasing backpack loads. Specifically, a significant decrease was seen for TFL at10% and 15% BW loads when compared with no load condition. In contrast, the decrease in CVA was only significant between no load condition and 15% body weight load. The SSA remained unchanged with backpack weight within 15% BW. Whereas the SSA of young adults may not be upset by an acute loading with a backpack within 15% of body weight, a 15% BW backpack led to more forward posture of the head on the neck. In addition, backpack load as low as 10% BW is enough to cause an immediate forward lean of the trunk.

Bridge-in-a-Backpack(TM). Task 2 : reduction of costs through design modifications and optimization.

DOT National Transportation Integrated Search

2011-09-01

The cost effective use of FRP composites in infrastructure requires the efficient use of the : composite materials in the design. Previous work during the development phase and : demonstration phase illustrated the need to refine the design methods f...

An Investigation of the Inertial Properties of Backpacks Loaded in Various Configurations

DTIC Science & Technology

1982-05-01

and Richard C. Nelson, Ph.D. S. PERFORMING ORGANIZATION NAME AND ADDRESS 10. PROGRAM ELEMENT, PROJECT, TASK AREA & WORK UNIT NUMBERS Biomechanics ...backpacks loads backpack system load carrying military clothing human backpack system military equipment loading configurations inertial properties 2i04...configuration, a 12.00-kg load, consisting of military clothing and equip- ment, was placed in the packs. The locations of the items were manipulated

Monocyte-mediated delivery of polymeric backpacks to inflamed tissues: a generalized strategy to deliver drugs to treat inflammation.

PubMed

Anselmo, Aaron C; Gilbert, Jonathan B; Kumar, Sunny; Gupta, Vivek; Cohen, Robert E; Rubner, Michael F; Mitragotri, Samir

2015-02-10

Targeted delivery of drugs and imaging agents to inflamed tissues, as in the cases of cancer, Alzheimer's disease, Parkinson's disease, and arthritis, represents one of the major challenges in drug delivery. Monocytes possess a unique ability to target and penetrate into sites of inflammation. Here, we describe a broad approach to take advantage of the natural ability of monocytes to target and deliver flat polymeric particles ("Cellular Backpacks") to inflamed tissues. Cellular backpacks attach strongly to the surface of monocytes but do not undergo phagocytosis due to backpack's size, disk-like shape and flexibility. Following attachment of backpacks, monocytes retain important cellular functions including transmigration through an endothelial monolayer and differentiation into macrophages. In two separate in vivo inflammation models, backpack-laden monocytes exhibit increased targeting to inflamed tissues. Cellular backpacks, and their abilities to attach to monocytes without impairing monocyte functions and 'hitchhike' to a variety of inflamed tissues, offer a new platform for both cell-mediated therapies and broad targeting of inflamed tissues. Copyright © 2014 Elsevier B.V. All rights reserved.

Effects of a postural education program on school backpack habits related to low back pain in children.

PubMed

Vidal, Josep; Borràs, Pere A; Ponseti, Francisco J; Cantallops, Jaume; Ortega, Francisco B; Palou, Pere

2013-04-01

Population based studies have demonstrated that children and adolescents often complain of low back pain. A group-randomized controlled trial was carried out to investigate the effects of a postural education program on school backpack habits related to low back pain in children aged 10-12 year. The study sample included 137 children aged 10.7 years (SD = 0.672). Six classes from two primary schools were randomly allocated into experimental group (EG) (N = 63) or control group (CG) (N = 74). The EG received a postural education program over 6 weeks consisting of six sessions, while the CG followed the usual school curriculum. A questionnaire was fulfilled by the participants at pre-test, post-test, and 3 months after the intervention finished. The outcomes collected were: (1) try to load the minimum weight possible, (2) carry school backpack on two shoulders, (3) belief that school backpack weight does not affect to the back, and (4) the use of locker or something similar at school. A sum score was computed from the four items. Single healthy items mostly improved after the intervention and remained improved after 3-month follow-up in EG, while no substantial changes were observed in the CG. Healthy backpack use habits score was significantly increased at post-test compared to baseline in the EG (P < 0.000), and remained significantly increased after 3-month, compared to baseline (P = 0.001). No significant changes were observed in the CG (P > 0.2). The present study findings confirm that children are able to learn healthy backpack habits which might prevent future low back pain.

Taming a Tiger in the City: Comparison of Motorized Backpack Applications and Source Reduction Against the Asian Tiger Mosquito, Aedes albopictus

DTIC Science & Technology

2014-06-01

TAMING A TIGER IN THE CITY: COMPARISON OF MOTORIZED BACKPACK APPLICATIONS AND SOURCE REDUCTION AGAINST THE ASIAN TIGER MOSQUITO, AEDES ALBOPICTUS...FONSECA2 AND ARY FARAJOLLAHI2,3,7 ABSTRACT. We evaluated 2 strategies to manage Aedes albopictus: 1) motorized backpack applications and 2) source...the community level. KEY WORDS Bacillus thuringiensis israelensis, Bti, methoprene, hand applications, backpack applications INTRODUCTION Aedes

Effects of carrying a backpack in an asymmetrical manner on the asymmetries of the trunk and parameters defining lateral flexion of the spine.

PubMed

Drzał-Grabiec, Justyna; Snela, Sławomir; Rachwał, Maciej; Podgórska, Justyna; Rykała, Justyna

2015-03-01

The aim of this study was to examine changes in the body posture parameters defining asymmetry of the trunk and lateral flexion of the spine in children while carrying a backpack weighing 10% of a child's weight. Carrying a backpack may negatively affect the posture of schoolchildren and contribute to spinal pain. The study involved 162 primary school students ages 11 to 13 years. The parameters describing body posture were assessed with a backpack carried on the right or left shoulder as well as without a load. To assess the predefined parameters, we used the CQ Elektronik System, employing the photogrammetric method. Trunk inclination shifted significantly in the opposite direction to the shoulder the backpack was carried on, and an increase in shoulder asymmetry was also found. We also observed a more pronounced right-side lateral flexion of the spine when the backpack was carried on the right shoulder and an analogous relationship for the left side. The results of this study show that carrying a backpack in an asymmetrical manner negatively affects spine, even if the backpack weight constitutes 10% of the child's weight, which has been previously recommended as a safe load for a child's shoulders. We suggest that the issue of safe backpack weight be reassessed and that students be taught basic ergonomic principles on how to carry loads. Changes to the management pattern of carrying textbooks to and from school also should be considered. © 2014, Human Factors and Ergonomics Society.

Backpack Strategies for Parents and Students

MedlinePlus

... in different sizes for different ages. Choose the right size pack for your child as well as one with enough room for necessary school items. Need More Information? For more facts on backpack safety, see “Backpack Facts: What’s All the Flap About?” ...

Running economy and energy cost of running with backpacks.

PubMed

Scheer, Volker; Cramer, Leoni; Heitkamp, Hans-Christian

2018-05-02

Running is a popular recreational activity and additional weight is often carried in backpacks on longer runs. Our aim was to examine running economy and other physiological parameters while running with a 1kg and 3 kg backpack at different submaximal running velocities. 10 male recreational runners (age 25 ± 4.2 years, VO2peak 60.5 ± 3.1 ml·kg-1·min-1) performed runs on a motorized treadmill of 5 minutes durations at three different submaximal speeds of 70, 80 and 90% of anaerobic lactate threshold (LT) without additional weight, and carrying a 1kg and 3 kg backpack. Oxygen consumption, heart rate, lactate and RPE were measured and analysed. Oxygen consumption, energy cost of running and heart rate increased significantly while running with a backpack weighing 3kg compared to running without additional weight at 80% of speed at lactate threshold (sLT) (p=0.026, p=0.009 and p=0.003) and at 90% sLT (p<0.001, p=0.001 and p=0.001). Running with a 1kg backpack showed a significant increase in heart rate at 80% sLT (p=0.008) and a significant increase in oxygen consumption and heart rate at 90% sLT (p=0.045 and p=0.007) compared to running without additional weight. While running at 70% sLT running economy and cardiovascular effort increased with weighted backpack running compared to running without additional weight, however these increases did not reach statistical significance. Running economy deteriorates and cardiovascular effort increases while running with additional backpack weight especially at higher submaximal running speeds. Backpack weight should therefore be kept to a minimum.

An Assessment of Diarrhea Among Long-Distance Backpackers in the Sierra Nevada.

PubMed

Meyer, Derek J; Costantino, Amber; Spano, Susanne

2017-03-01

Diarrhea is a common problem among long-distance backpackers, ranging in overall incidence from 11-56% as reported by previous studies on the Appalachian Trail and Long Trail. Differences in age, sex, and regularity of standard backcountry hygiene recommendations and practices have been shown to significantly affect the incidence of diarrhea. No study to date has investigated these trends among long-distance backpackers on the John Muir Trail (JMT) in the Sierra Nevada mountain range of California. Retrospective analysis of online survey data gathered from long-distance backpackers who attempted a JMT trek in 2014. Data were assessed for the significance of variables that might contribute to the incidence and severity of on-trail diarrhea. Of 737 valid responders, 16.4% reported experiencing diarrhea (82% with minimal/mild severity; 18% with significant severity). Regular hand sanitizer use was significantly correlated with more severe diarrhea (P < .05), but had no effect on incidence. Regular hand sanitizer users followed all other recommended hygiene practices as frequently as or better than those not using hand sanitizer regularly. Of all backpackers, 88% filtered or treated their drinking water regularly, with 18% of those reporting diarrhea of any severity. JMT backpackers have a comparatively lower incidence of diarrhea than backpackers on other major long-distance backpacking routes in the United States. Most JMT backpackers follow standard backcountry hygiene recommendations, including regular filtration or treatment of drinking water. No statistical significance was found between the incidence of diarrhea and compliance with standard hygiene recommendations. Regular hand sanitizer use was significantly correlated with more severe diarrhea but was not associated with incidence. There was no significant difference in compliance with standard backcountry hygiene practices between regular and infrequent hand sanitizer users. Copyright © 2017 Wilderness Medical Society. Published by Elsevier Inc. All rights reserved.

Feasibility Study of 2000 Foot Underwater Breathing Apparatus

DTIC Science & Technology

1978-08-14

It was found that a backpack mounted scrubber , with integral gas heating and P02 control, with a fan-driven circulation system, could be inte’faced...PROGRAMS.............................5 K BACKPACK FAN- SCRUBBER ...................................... . 5 The Backpack...9 The Scrubber .................................... .......... 9 Gas Heating ......................................... ..... 9 The Helmet

Bridge-in-a-Backpack(TM) task 5: guidelines for quality assurance.

DOT National Transportation Integrated Search

2016-03-01

This report includes fulfillment of Task 5 of a multi-task contract to further enhance concrete filled FRP tubes, or : the Bridge in a Backpack. Task 6 provides guidelines for quality assurance. : The Bridge-in-a-Backpack or hybrid composite arch ...

Repair of lesser tuberosity osteotomy for shoulder arthroplasty: biomechanical evaluation of the Backpack and Dual Row techniques.

PubMed

Heckman, Daniel S; Hoover, Stephen A; Weinhold, Paul S; Spang, Jeffrey T; Creighton, R Alexander

2011-04-01

Subscapularis dysfunction following total shoulder arthroplasty can result in permanent loss of function. The lesser tuberosity osteotomy (LTO) has been proposed as a method which utilizes bone-to-bone healing to improve subscapularis function. This study evaluates the biomechanical properties of two described techniques for LTO repair. We hypothesized that a Dual Row repair would be stronger and demonstrate less cyclic displacement than a Backpack repair. Ten matched pairs of cadaveric humeri were dissected, leaving the subscapularis intact, and a lesser tuberosity osteotomy was performed. Matched shoulders were randomized to either a Backpack repair or a Dual Row repair. Repairs were subjected to cyclic loading to 180 N for 500 cycles, followed by ramp-up loading to ultimate failure. Clinical failure was defined as displacement >5 mm after 500 cycles. Displacement after 500 cycles was significantly greater for the Backpack repair (6.9 mm) than for the Dual Row repair (4.6 mm) (P = .007). Most displacement occurred on the first cycle (Backpack, 4.6 mm; Dual Row, 2.1 mm) (P < .001). There was a trend toward a higher clinical failure rate for the Backpack repair (8/10) than the Dual Row repair (3/10). Ultimate tensile strength was significantly greater for the Dual Row repair (632.3 N) than for the Backpack repair (510.9 N) (P = .01). The Dual Row technique is significantly stronger and demonstrates less cyclic displacement than the Backpack technique. Clinical studies are needed to determine the impact of LTO repair technique on subscapularis function following shoulder arthroplasty. Copyright © 2011. Published by Mosby, Inc.

Effect of backpack carrying on forced vital capacity in cystic fibrosis: A randomized crossover-controlled trial.

PubMed

Combret, Yann; Medrinal, Clement; Prieur, Guillaume; Robledo Quesada, Aurora; Le Roux, Pascal; Reychler, Grégory

2018-01-01

Backpack carrying impacts lung function in healthy children but the effect in children with cystic fibrosis (CF) is unknown. Three backpack positions were tested: no backpack (NB), a 12.5% body-weight backpack carried bilaterally (BB) or unilaterally (UB), at rest and during a 10 minute walk. Primary outcome was forced vital capacity (FVC). Secondary outcomes included comparison of cardio-respiratory variables within and between groups. Nine children with CF (13.3±2.6 years; FEV1 66±22%) and 18 healthy children (13.8±1.8 years; FEV1 107±30%) were included. FVC was reduced with UB compared to NB (68.5±23.3% vs 72.1±24.3%, p = 0.024) in children with CF. FEV1, MIP and MEP decreased more with UB in children with CF than in healthy peers. Increases in VO2, VCO2 and minute ventilation with UB were greater in the CF group during walking. Unilateral backpack wearing affects FVC in children with CF and requires greater cardio-respiratory adjustments compared to healthy peers.

Performance of a Multifunctional Space Evaporator-Absorber-Radiator (SEAR)

NASA Technical Reports Server (NTRS)

Izenson, Michael G.; Chen, Weibo; Phillips, Scott; Chepko, Ariane; Bue, Grant; Quinn, Gregory

2014-01-01

The Space Evaporator-Absorber-Radiator (SEAR) is a nonventing thermal control subsystem that combines a Space Water Membrane Evaporator (SWME) with a Lithium Chloride Absorber Radiator (LCAR). The LCAR is a heat pump radiator that absorbs water vapor produced in the SWME. Because of the very low water vapor pressure at equilibrium with lithium chloride solution, the LCAR can absorb water vapor at a temperature considerably higher than the SWME, enabling heat rejection sufficient for most EVA activities by thermal radiation from a relatively small area radiator. Prior SEAR prototypes used a flexible LCAR that was designed to be installed on the outer surface of a portable life support system (PLSS) backpack. This paper describes a SEAR subsystem that incorporates a very compact LCAR. The compact, multifunctional LCAR is built in the form of thin panels that can also serve as the PLSS structural shell. We designed and assembled a 2 ft² prototype LCAR based on this design and measured its performance in thermal vacuum tests when supplied with water vapor by a SWME. These tests validated our models for SEAR performance and showed that there is enough area available on the PLSS backpack shell to enable rejection of metabolic heat from the LCAR. We used results of these tests to assess future performance potential and suggest approaches for integrating the SEAR system with future space suits.

Relative Weights of the Backpacks of Elementary-Aged Children

ERIC Educational Resources Information Center

Bryant, Benjamin P.; Bryant, Judith B.

2014-01-01

The purpose of the study was to describe the range of relative backpack weights of one group of elementary-aged children and the extent to which they exceeded recommended levels. A second purpose was to explore whether gender and age help predict the relative weight of children's backpacks. Ninety-five 8- to 12-year-old elementary school students…

Backpack Cookery. Instructor Manual: Outdoor Living Skills Series.

ERIC Educational Resources Information Center

Phillips, Jan

The material on backpack cookery has been written with the classroom teacher in mind, but it can be adapted by camp leaders, 4-H clubs, scouting organizations, and other youth groups. Basic instructions in planning and preparing meals for the backpacking trip are given, along with a discussion on traveling light and a list of essential and…

Backpack Weight and the Scaling of the Human Frame - II

NASA Astrophysics Data System (ADS)

O'Shea, Michael J.

2018-02-01

The backpack weight a hiker is capable of carrying depends on several factors. These include the hiker's weight, body mass index (BMI), fitness, and training. It can also depend on the terrain on which the hiker travels, e.g., off-trail or on-trail. However, online advice has tended to focus on the hiker's weight and suggests that pack weight should be a certain percentage of the hiker's weight. We developed a model of how the ability of a hiker to carry a backpack depends on the weight of the hiker. Modeling such real-life situations helps grab the attention of students in introductory physics. We have expanded on our earlier idea and present a more sophisticated model of an adult backpacker. In particular, we generalize our model for scaling of the human frame, and investigate how the ability to carry a backpack (within our model) varies with the form of scaling used.

Effects of Packstock Use and Backpackers on Water Quality in Yosemite National Park, California

NASA Astrophysics Data System (ADS)

Forrester, H.; Clow, D. W.; Roche, J. W.; Heyvaert, A.

2016-12-01

Visitor use, primarily backpacker camping, packstock (horse and mule) trail use, and packstock grazing, in designated Wilderness, increases the potential for negative effects on water quality. To determine the effects of visitor use on water quality in Wilderness in Yosemite National Park, we collected and analyzed surface-water samples for water quality indicators, consisting of fecal indicator bacteria (Escherichia coli), nutrients (nitrogen, phosphorus), suspended sediment concentration (SSC), and hormones (e.g. estrogen compounds) during the summers of 2012-2014. We collected samples upstream and downstream from different types of visitor use at routine intervals (weekly or biweekly) and during storms. Additionally, we sampled upstream and downstream from meadows, and targeted different types of visitor use during a park-wide synoptic sampling campaign (n=63). At packstock stream crossings, statistically significant (P≤0.05) increases in Escherichia coli (E. coli) and SSC occurred downstream from crossings compared to upstream conditions during routine sampling (median difference: 3 CFU 100ml-1, and >0.3 mg l-1, respectively) and during storms (median difference: 32 CFU 100ml-1, and 2.9 mg l-1). At backpacker campsites, during routine sampling, significant increases occurred downstream from backpacker camping for E. coli (median difference: 1 CFU 100ml-1), and estrogen hormones were detected. At packstock grazing areas, which are located in meadows, no significant increases were detected for any of the measured water quality indicators downstream from grazing. Most synoptic sample concentrations were near or below detection limits. Our results indicate that under current use levels: 1) packstock trail use and backpacker camping are associated with detectable effects on water quality, which are most pronounced during storms; 2) increases in water quality indicators were not detected downstream from meadows where packstock were grazed; and 3) environmental processes in meadows provide a valuable ecosystem service by reducing human related sources of microbial contamination.

Effects of running with backpack loads during simulated gravitational transitions: Improvements in postural control

NASA Astrophysics Data System (ADS)

Brewer, Jeffrey David

The National Aeronautics and Space Administration is planning for long-duration manned missions to the Moon and Mars. For feasible long-duration space travel, improvements in exercise countermeasures are necessary to maintain cardiovascular fitness, bone mass throughout the body and the ability to perform coordinated movements in a constant gravitational environment that is six orders of magnitude higher than the "near weightlessness" condition experienced during transit to and/or orbit of the Moon, Mars, and Earth. In such gravitational transitions feedback and feedforward postural control strategies must be recalibrated to ensure optimal locomotion performance. In order to investigate methods of improving postural control adaptation during these gravitational transitions, a treadmill based precision stepping task was developed to reveal changes in neuromuscular control of locomotion following both simulated partial gravity exposure and post-simulation exercise countermeasures designed to speed lower extremity impedance adjustment mechanisms. The exercise countermeasures included a short period of running with or without backpack loads immediately after partial gravity running. A novel suspension type partial gravity simulator incorporating spring balancers and a motor-driven treadmill was developed to facilitate body weight off loading and various gait patterns in both simulated partial and full gravitational environments. Studies have provided evidence that suggests: the environmental simulator constructed for this thesis effort does induce locomotor adaptations following partial gravity running; the precision stepping task may be a helpful test for illuminating these adaptations; and musculoskeletal loading in the form of running with or without backpack loads may improve the locomotor adaptation process.

Understanding the Virtualization of the Backpacker Culture and the Emergence of the Flashpacker: A Mixed-Method

ERIC Educational Resources Information Center

Paris, Cody Morris

2010-01-01

Backpackers are pioneers of mobility, who provide a unique domain for critical tourism research. The lineage of backpacker ideals, including pursuit of authentic experiences, independence, escape and social interaction, can be traced back to the "tramps" of the 1880s and the "drifters" of the 1970s. The recent emergence of the…

Blood lactate thresholds and walking/running economy are determinants of backpack-running performance in trained soldiers.

PubMed

Simpson, Richard J; Graham, Scott M; Connaboy, Christopher; Clement, Richard; Pollonini, Luca; Florida-James, Geraint D

2017-01-01

We developed a standardized laboratory treadmill protocol for assessing physiological responses to a simulated backpack load-carriage task in trained soldiers, and assessed the efficacy of blood lactate thresholds (LTs) and economy in predicting future backpack running success over an 8-mile course in field conditions. LTs and corresponding physiological responses were determined in 17 elite British soldiers who completed an incremental treadmill walk/run protocol to exhaustion carrying 20 kg backpack load. Treadmill velocity at the breakpoint (r = -0.85) and Δ 1 mmol l(-1) (r = -0.80) LTs, and relative V˙O2 at 4 mmol l(-1) (r = 0.76) and treadmill walk/run velocities of 6.4 (r = 0.76), 7.4 (r = 0.80), 11.4 (r = 0.66) and 12.4 (r = 0.65) km h(-1) were significantly associated with field test completion time. We report for the first time that LTs and backpack walk/run economy are major determinants of backpack load-carriage performance in trained soldiers. Copyright © 2016 Elsevier Ltd. All rights reserved.

Kayak Design Challenge

ERIC Educational Resources Information Center

Wood, Anson

2011-01-01

Living in the Adirondack Park and being an avid outdoorsman has often resulted in the author's love of the outdoors working its way into class projects. In 2010, the author gave a group of 25 students in grades 9-12 a challenge that required them to design and construct a prototype inexpensive, lightweight kayak for backpackers and fisherman. In…

Effects of carrying a backpack in a symmetrical manner on the shape of the feet.

PubMed

Drzał-Grabiec, Justyna; Snela, Sławomir; Rachwał, Maciej; Rykała, Justyna; Podgórska, Justyna

2013-01-01

The aim of this study was to assess changes in the shape of the feet while carrying a backpack constituting 10% of a child's weight. It was an observational, cross-sectional study involving 118 primary school children aged 11-13 years. Selected parameters of foot shape were assessed in both a normal position and with a backpack using podoscopy and a CQ-ST examination device. The study revealed significant differences in the length and width of the right and left feet between assessments. Moreover, the longitudinal arch of the foot was significantly lowered and deformity of the great toe was reported. Carrying a backpack constituting 10% of a child's weight results in lowering of the longitudinal and traverse arches of the feet and advanced toe deformities. We performed an observational, cross-sectional study examining the effect of carrying a backpack constituting 10% of a child's weight on parameters of foot shape and observed significant lowering of the longitudinal and traverse arches of the feet and advanced toe deformities.

Equipment of medical backpacks in mountain rescue.

PubMed

Elsensohn, Fidel; Soteras, Inigo; Resiten, Oliver; Ellerton, John; Brugger, Hermann; Paal, Peter

2011-01-01

We conducted a survey of equipment in medical backpacks for mountain rescuers and mountain emergency physicians. The aim was to investigate whether there are standards for medical equipment in mountain rescue organizations associated with the International Commission for Mountain Emergency Medicine (ICAR MEDCOM). A questionnaire was completed by 18 member organizations from 14 countries. Backpacks for first responders are well equipped to manage trauma, but deficiencies in equipment to treat medical emergencies were found. Paramedic and physicians' backpacks were well equipped to provide advanced life support and contained suitable drugs. We recommend that medical backpacks should be equipped in accordance with national laws, the medical emergencies in a given region, and take into account the climate, geography, medical training of rescuers, and funding of the organization. Automated external defibrillator provision should be improved. The effects of temperature on the drugs and equipment should be considered. Standards for training in the use and maintenance of medical tools should be enforced. First responders and physicians should only use familiar tools and drugs.

Association of Relative Backpack Weight with Reported Pain, Pain Sites, Medical Utilization, and Lost School Time in Children and Adolescents

ERIC Educational Resources Information Center

Moore, Michael J.; White, Gregory L.; Moore, Donna L.

2007-01-01

Background: There is debate about a 10% versus 15% of body weight cutoff point for safe weight of school backpacks. Estimation of the cutoff may be affected by use of survey methods and failure to assess pain experienced while wearing a backpack. Previous research also suggests that younger students and females are more at risk for developing…

Phthalates and alternative plasticizers and potential for contact exposure from children's backpacks and toys.

PubMed

Xie, Mingjie; Wu, Yaoxing; Little, John C; Marr, Linsey C

2016-01-01

This work focuses on the mass content of plasticizers in children's backpacks and toys, and their mass transfer from product surfaces to cotton wipes. The mass content of plasticizers in six backpacks and seven toys was measured by extracting them in tetrahydrofuran. Bis(2-ethylhexyl) terephthalate (DEHT) was the most common plasticizer, dominating the composition of plasticizers in four backpacks (average mass content in product polyvinyl chloride, 5.38 ± 1.98%-25.5 ± 3.54%) and six plastic toys (8.17 ± 1.85%-21.2 ± 1.11%). The surface of each product was wiped with three dry and three wet (by isopropanol) cotton wipes, so as to evaluate the mass transfer of plasticizers to clothing and human skin, respectively. DEHT was the most common plasticizer detected on wipe samples. There were strong correlations (backpacks r=0.90; plastic toys r=0.96) between average mass transfer of DEHT to wet wipes and its average mass content in the product. The mass transfers of the five dominant plasticizers in one backpack to both dry and wet wipes were also correlated (both r=1.00) with their mass contents. These results suggest that the mass transfer of plasticizers from products to clothing or human skin is strongly associated with their mass content.

Tests of an experimental slash ignition unit

Treesearch

James L. Murphy; Harry E. Schimke

1965-01-01

A prototype ignition package containing an incendiary powder and designed for slash and brush burning jobs showed some promise, but the unit tested was not superior to such conventional devices as fusees, diesel backpack type flamethrowers, Very pistols, and drip torches.

From Boffing to Body Flying, UCSC Students Are Discovering the Joys of New Athletics

ERIC Educational Resources Information Center

College and University Business, 1973

1973-01-01

The new athletic program at the University of California, Santa Cruz, is designed to provide noncompetitive, nonspectator physical activities and recreational opportunities, including jogging, sailing, mountaineering, aikido, backpacking, kayaking and body flying. (Author/PG)

Bridge-in-a-Backpack(TM). Task 4 : monitoring and load rating.

DOT National Transportation Integrated Search

2015-01-01

Five bridges were constructed utilizing UMaines hybrid composite arch technology as part of the Maine : Department of Transportations Composites Initiative. Three were constructed in 2010, one in 2011 and the final : one in 2012. The designs fo...

Evaluation of Three Commercial Backpack Sprayers with Aqualuer (registered trademark) 20-20 Against Caged Adult Aedes aegypti

DTIC Science & Technology

2016-03-11

institutions, research libraries, and research funders in the common goal of maximizing access to critical research. Evaluation of Three Commercial Backpack...strictly limited to personal, educational, and non- commercial use. Commercial inquiries or rights and permissions requests should be directed to the...individual publisher as copyright holder. SCIENTIFIC NOTE EVALUATION OF THREE COMMERCIAL BACKPACK SPRAYERS WITH AQUALUERH 20–20 AGAINST CAGED ADULT

Characterization of the mechanical properties of backpacks and their influence on the energetics of walking.

PubMed

Foissac, Matthieu; Millet, Guillaume Y; Geyssant, André; Freychat, Philippe; Belli, Alain

2009-01-19

The objectives of the experiment were (i) to characterize the mechanical properties of backpacks and (ii) to study the influence of a flexible backpack on the energetics and kinematics of walking. Twelve subjects walked at different speeds on a treadmill with each of two backpacks loaded with 25% bodyweight, with either a rigid or a flexible link between the body attachment and the suspended loads. A single degree of freedom linear model of the link between the pack and the trunk was used to calculate the stiffness and damping coefficient of the two backpacks. The oxygen consumption (VO2) and the vertical acceleration of both the backpack and trunk were measured. The vertical excursion of the pack given by the model was significantly correlated with that actually measured (R=0.87, p<0.001). At 3.7 and 4.5 km h(-1) the flexible pack induced lower acceleration peaks (respectively -22% and -8%; p<0.05) and tended to reduce VO2 (p=0.055 at 4.5 km h(-1)) compared with the rigid one. At 5.2 and 6 km h(-1) both the accelerative forces and VO2 increased with the flexible pack (p<0.05) mainly because of the high vertical movement of the pack. It was concluded that a simple model can be used to predict the vertical excursion of the pack and that a flexible backpack can provide energetic benefits when its oscillations are nearly in phase with those of the trunk. However, any resonance effect can lead to a modified walking pattern and an increased metabolic cost.

Ergonomics evaluation of school bags in Tehran female primary school children.

PubMed

Mohammadi, Somayeh; Mokhtarinia, Hamidreza; Nejatbakhsh, Reza; Scuffham, Andrew

2017-01-01

More than 90% of the elementary school students in the world and most of the Iranian students use backpacks. Heavy school bags, failure to apply ergonomics standards in student's backpacks, and also mismatch between anthropometrics dimensions and schoolbag size are important issues for children's health. The purpose of this study was to gather baseline information on the average weight carried by female primary students. It also aimed to evaluate ergonomics standards for student backpacks. A cross-sectional study was conducted on 212 Iranian girl students aged 6- 11 years. Body weight and bag weight were measured with electronic scales and body mass index calculated with WHO software 2007. A questionnaire was constructed to gather information about the backpacks. Body dimensions were measured with VICON motion Analyze system (460). Ergonomics factors were recorded using a checklist. 80.8% of the students used a backpack at a higher weight than recommended by the standards of 10% of body weight. The most common type of schoolbag used was double strap packs (92.5%). The majority of the students carried packs on their backs; however, most of them did not make any adjustments (79.8%). The results have shown a mismatch between the anthropometric measures and the student's backpack dimensions. Parents, students and school staff should be informed about these critical issues as well as suitable controls should be implemented in buying and using the bags.

Backpack Basics

MedlinePlus

... or not used properly can make for some heavy health problems. How Can Backpacks Cause Problems? Your ... as natural shock absorbers. When you put a heavy weight on your shoulders in the wrong way, ...

The evolution of Israeli public policy for drug-using backpackers.

PubMed

Bonny-Noach, Hagit

2018-05-04

Over the past 20 years, the young-adult backpacking trip has emerged as a significant social phenomenon in Israeli society. This has received attention from scholars specializing in anthropology and tourism research, but only a few analytical studies exist on the drug policy processes and few provide Israeli social and health perspectives. The interaction of policymakers, media, and health deviancy is an important focus of inquiry. This study charts the establishment of a drug policy for Israeli backpackers. It covers the period from the emergence of the problem in the early 1990s until the present. This study employs content analysis of newspaper articles and official documents, protocols, and reports written by policymakers and professionals. The latter were mostly produced by the Israel Anti-Drug Authority (IADA) and the Special Committee on Drug and Alcohol Abuse (SCDAA) in the Israeli Knesset. These are the two major Israeli agencies responsible for drug policy. Three periods in the establishment of backpacker drug policy can be identified. First period - until late 1995: No drug problem was recognized. The subject was not part of the public agenda. Even so, many backpackers were actually taking drugs. Second Period - late 1995 to 2000: The Israeli media started to report intensively on backpacker drug use. The issue then flared up into a significant 'social problem' demanding health and social solutions. In this phase, policymakers capitalized on a window of opportunity, and formulated a policy emphasizing prevention. Third period - from 2001 until the present: A sea change in institutional attitude occurred. In this period, drug-policy emphasis shifted from prevention to therapeutic-treatment approaches. As a result, harm reduction and unique treatment strategies were developed. Policymakers should continue to improve health prevention, treatment, and harm reduction resources. It is recommended that the Ministry of Health set up consultation centers at clinics for travelers. These would provide support and assistance to backpackers before, during, and after their trips. The attention that Israel's drug policy for backpackers gives to prevention, treatment, and harm reduction is the first of its kind and unique. It can therefore serve as a model for other countries.

The Challenge of Winter Backpacking.

ERIC Educational Resources Information Center

Cavanaugh, Michael; Mapes, Alan

1981-01-01

Tips and techniques for safe and enjoyable winter backpacking are offered. Topics covered include cross county skis, snowshoes, clothing, footwear, shelter, sleeping bags, food, hypothermia prevention, as well as general rules and requirements. (CO)

Combatting Sexist Attitudes through Writing.

ERIC Educational Resources Information Center

Popham, Rae Jeane

A composition activity designed to raise students' consciousness of sexually stereotyped language and to encourage exploration of assumptions about men, women, and language had three parts: students were given a list of ten concrete details about an activity commonly associated with men or women (backpacking, cooking hamburgers, and grocery…

Energy harvesting from a backpack instrumented with piezoelectric shoulder straps

NASA Astrophysics Data System (ADS)

Granstrom, Jonathan; Feenstra, Joel; Sodano, Henry A.; Farinholt, Kevin

2007-10-01

Over the past few decades the use of portable and wearable electronics has grown steadily. These devices are becoming increasingly more powerful. However, the gains that have been made in the device performance have resulted in the need for significantly higher power to operate the electronics. This issue has been further complicated due to the stagnant growth of battery technology over the past decade. In order to increase the life of these electronics, researchers have begun investigating methods of generating energy from ambient sources such that the life of the electronics can be prolonged. Recent developments in the field have led to the design of a number of mechanisms that can be used to generate electrical energy, from a variety of sources including thermal, solar, strain, inertia, etc. Many of these energy sources are available for use with humans, but their use must be carefully considered such that parasitic effects that could disrupt the user's gait or endurance are avoided. These issues have arisen from previous attempts to integrate power harvesting mechanisms into a shoe such that the energy released during a heal strike could be harvested. This study develops a novel energy harvesting backpack that can generate electrical energy from the differential forces between the wearer and the pack. The goal of this system is to make the energy harvesting device transparent to the wearer such that his or her endurance and dexterity is not compromised. This will be accomplished by replacing the traditional strap of the backpack with one made of the piezoelectric polymer polyvinylidene fluoride (PVDF). Piezoelectric materials have a structure such that an applied electrical potential results in a mechanical strain. Conversely, an applied stress results in the generation of an electrical charge, which makes the material useful for power harvesting applications. PVDF is highly flexible and has a high strength, allowing it to effectively act as the load bearing member. In order to preserve the performance of the backpack and user, the design of the pack will be held as close to existing systems as possible. This paper develops a theoretical model of the piezoelectric strap and uses experimental testing to identify its performance in this application.

Harvesting of electrical energy from a backpack using piezoelectric shoulder straps

NASA Astrophysics Data System (ADS)

Sodano, Henry A.; Granstrom, Jonathan; Feenstra, Joel; Farinholt, Kevin

2007-04-01

Over the past few decades the use of portable and wearable electronics has grown steadily. These devices are becoming increasingly more powerful, however, the gains that have been made in the device performance has resulted in the need for significantly higher power to operate the electronics. This issue has been further complicated due to the stagnate growth of battery technology over the past decade. In order to increase the life of these electronics, researchers have begun investigating methods of generating energy from ambient sources such that the life of the electronics can be prolonged. Recent developments in the field have led to the design of a number of mechanisms that can be used to generate electrical energy, from a variety of sources including thermal, solar, strain, inertia, etc. Many of these energy sources are available for use with humans, but their use must be carefully considered such that parasitic effects that could disrupt the user's gait or endurance are avoided. These issues have arisen from previous attempts to integrate power harvesting mechanisms into a shoe such that the energy released during a heal strike could be harvested. This study develops a novel energy harvesting backpack that can generate electrical energy from the differential forces between the wearer and the pack. The goal of this system is to make the energy harvesting device transparent to the wearer such that his or her endurance and dexterity is not compromised. This will be accomplished by replacing the traditional strap of the backpack with one made of the piezoelectric polymer polyvinylidene fluoride (PVDF). Piezoelectric materials have a structure such that an applied electrical potential results in a mechanical strain. Conversely, an applied stress results in the generation of an electrical charge, which makes the material useful for power harvesting applications. PVDF is highly flexible and has a high strength allowing it to effectively act as the load bearing member. In order to preserve the performance of the backpack and user, the design of the pack will be held as close to existing systems as possible. This paper develops a theoretical model of the piezoelectric strap and uses experimental testing to identify its performance in this application.

[Effect of different backpack loads on physiological parame ters in walking].

PubMed

Zhao, Meiya; Tian, Shan; Tang, Qiaohong; Ni, Yikun; Wang, Lizhen; Fan, Yubo

2014-10-01

This study investigated the effect of prolonged walking with load carriage on body posture, muscle fatigue, heart rate and blood pressure of the tested subjects. Ten healthy volunteers performed 30 min walking trials on treadmill (speed = 1.1 m/s) with different backpack loads [0% body weight (BW), 10% BW, 15% BW and 20% BW]. The change of body posture, muscle fatigue, heart rate and blood pressure before and after walking and the recovery of muscle fatigue during the rest time (0, 5, 10 and 15 min) were collected using the Bortec AMT-8 and the NDI Optotrak Certus. Results showed that the forward trunk and head angle, muscle fatigue, heart rate and blood pressure increased with the increasing backpack loads and bearing time. With the 20% BW load, the forward angle, muscle fatigue and systolic pressure were significantly higher than with lighter weights. No significantly increased heart rate and diastolic pressure were found. Decreased muscle fatigue was found after removing the backpack in each load trial. But the recovery of the person with 20% BW load was slower than that of 0% BW, 10% BW and 15% BW. These findings indicated that the upper limit of backpack loads for college-aged students should be between 15% BW and 20% BW according to muscle fatigue and forward angle. It is suggested that backpack loads should be restricted to no more than 15% BW for walks of up to 30 min duration to avoid irreversible muscle fatigue.

Kinetic potential influences visual and remote haptic perception of affordances for standing on an inclined surface.

PubMed

Malek, Eric A; Wagman, Jeffrey B

2008-01-01

The ability of a perceiver-actor to perform a particular behaviour depends on their ability to generate and control the muscular forces required to perform that behaviour. If an intended behaviour is to be successful, perception must be relative to this ability. We investigated whether perceiver-actors were sensitive to how changes in their mass distribution influenced their ability to stand on an inclined surface. Participants reported whether they would be able to stand on an inclined surface while wearing a weighted backpack on their back, while wearing a weighted backpack on their front, and while not wearing a weighted backpack. In addition, participants performed this task by either viewing the surface or exploring it with a hand-held rod (while blindfolded). The results showed that perception of affordances for standing on the inclined surface depended on how the backpack influenced the ability of the participant to stand on the surface. Specifically, perceptual boundaries occurred at steeper inclinations when participants wore the backpack on their front than when they wore it on their back. Moreover, this pattern occurred regardless of the perceptual modality by which the participants explored the inclined surface.

Changes in postural sway as a consequence of wearing a military backpack.

PubMed

Heller, Michelle F; Challis, John H; Sharkey, Neil A

2009-07-01

Military personnel are often required to carry all of their personal supplies and equipment for long distances during both training and combat situations, creating many biomechanical and postural challenges for these individuals. In addition to other problems such as generalized fatigue and the development of stress fractures, significant external loads may also affect a soldier's postural sway. The purpose of this study was to assess changes in postural sway as a consequence of wearing a military backpack in females. Forty-three female subjects between the ages of 18 and 25 volunteered to participate. There were two conditions: unloaded and while wearing an 18.1 kg military backpack. Each subject stood with two feet on a force platform for 30s under both conditions while center of pressure (COP) data were collected. COP path length increased 64%, medial-lateral excursion increased 131%, anterior-posterior excursion increased 54%, and COP area increased 229% with addition of the backpack (p<0.0001 for all of these measures). These data show that wearing 18.1 kg of external weight in a military backpack increases the postural sway of females, which may in turn increase the likelihood of falls and injury.

Five Things Girls Want to Know about Periods

MedlinePlus

... supplies." Even better, keep extras in your backpack, locker, or gym bag. 5. What If Blood Leaks ... regularly and keep extras in your backpack or locker. For extra protection on heavy days, some girls ...

Eco-Challenge: A 4-Week Approach to Eco-Action.

ERIC Educational Resources Information Center

Raines, J. Thayer

1991-01-01

Describes Challenge Wilderness Camp (Bradford, Vermont), a 4-week residential program designed to teach boys, ages 9-16, environmental ethics through first-hand experiences. The camp incorporates land and waste management policies and procedures; programs in outdoor skills instruction; and wilderness trips including backpacking, off-trail hiking,…

Mars EVA Suit Airlock (MESA)

NASA Astrophysics Data System (ADS)

Ransom, Stephen; Böttcher, Jörg; Steinsiek, Frank

The Astrium Space Infrastructure Division has begun an in-house research activity of an Earth-based simulation facility supporting future manned missions to Mars. This research unit will help to prepare and support planned missions in the following ways: 1) to enable the investigation and analysis of contamination issues in advance of a human visit to Mars; 2) as a design tool to investigate and simulate crew operations; 3) to simulate crew operation during an actual mission; 4) to enable on-surface scientific operations without leaving the shirt-sleeve habitation environment ("glove box principle"). The MESA module is a surface EVA facility attached to the main habitation or laboratory module, or mobile pressurized rover. It will be sealed, but not pressurized, and provide protection against the harsh Martian environment. This module will include a second crew airlock for safety reasons. The compartment can also be used to provide an external working bench and experiment area for the crew. A simpler MESA concept provides only an open shelter against wind and dust. This concept does not incorporate working and experimental areas. The principle idea behind the MESA concept is to tackle the issue of contamination by minimizing the decontamination processes needed to clean surface equipment and crew suit surfaces after an EVA excursion prior to the astronaut re-entering the habitable area. The technical solution envisages the use of a dedicated crew suit airlock. This airlock uses an EVA suit which is externally attached by its back-pack to the EVA compartment area facing the Martian environment. The crew donns the suit from inside the habitable volume through the airlock on the back of the suit. The surface EVA can be accomplished after closing the back-pack and detaching the suit. A special technical design concept foresees an extendable suit back-pack, so that the astronaut can operate outside and in the vincinity of the module. The key driver in the investigation is the problem of contamination of the habitable volume by EVA and sampling activities and the transport of Earth-generated contaminants to Mars.

Experimental measurement of energy harvesting with backpack

NASA Astrophysics Data System (ADS)

Pavelkova, Radka; Vala, David; Suranek, Pavel; Mahdal, Miroslav

2017-08-01

This article deals with the energy harvesting systems, especially the energy harvesting backpack, which appears as a convenient means for energy harvesting for mobile sensors power. Before starting the experiment, it was necessary to verify whether this energy will be sufficient to get acquainted with the human kinematics and analyze problematics itself. For this purpose there was used motion capture technology from Xsens. Measured data on the position of a particle moving man and back when walking, these data were then used for experimental realization of energy harvesting backpack and as input data to the simulation in Simulink, which brought us a comparison between theoretical assumptions and practical implementation. When measuring characteristics of energy harvesting system we have a problem with measurements on backpack solved when redoing of the hydraulic cylinder as a source of a suitable movement corresponding to the amplitude and frequency of human walk.

Developing hands-on ergonomics lessons for youth

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bennett, C; Alexandre, M; Jacobs, K

2006-02-22

By the time students are ready to enter the workforce they have been exposed to up to 20 years of ergonomics risk factors. As technology evolves, it provides more opportunities for intensive repetitive motion and with computers, cell phones, personal digital assistants (PDAs), and electronic games. The average student engages in fewer active physical activities, sit stationary in mismatched furniture in schools for hours and carry heavy backpacks. While long-term effects remain to be identified, increasingly ergonomists and others concerned with musculoskeletal health and wellness, see a need for early ergonomics education. This interactive session provides a hands-on approach tomore » introducing ergonomics to students. Although different approaches may effectively introduce ergonomics at even early stages of development, this program was designed for youth at the middle to high school age. Attendees will participate in four activities designed to introduce ergonomics at an experiential level. The modules focus on grip strength, effective breathing, optimizing your chair, and backpack safety. The workshop will include presentation and worksheets designed for use by teachers with minimal ergonomics training. Feedback from the participants will be sought for further refining the usability and safety of the training package.« less

Intermountain Lesiure Symposium Proceedings (10th, Provo, Utah, November 16, 1989).

ERIC Educational Resources Information Center

Palmer, Gary K., Ed.; Giles, Scott B., Ed.

The following papers were among those presented at the symposium hosted by Brigham Young University: (1) "Situational Leadership Styles of Four Recreation and Sport Supervisors Using a Time Series Design" (Maurice Phipps, and others; (2) "Backpacking Sitting Down: Reminiscences from the Great Siberian Railroad" (Daniel L. Dustin); (3) "The…

First Aid Challenge

ERIC Educational Resources Information Center

Roman, Harry T.

2011-01-01

This article describes a challenge wherein students will be asked to design a portable first aid kit that is normally carried in a recreational vehicle (RV), but can also be hand-carried or backpacked off road for distances of approximately 1-2 miles. This can be a very practical challenge for the students because it touches everyone. Everybody…

Evaluation of spray drift from backpack and UTV spraying

USDA-ARS?s Scientific Manuscript database

The objective of these tests was to evaluate pesticide drift from ground applications using a standard manual pump backpack sprayer and a UTV-mounted boomless sprayer. Three deposition sampler types were deployed: Mylar cards, water-sensitive papers, and artificial foliage. This study indicates that...

Assessing the efficacy of single-pass backpack electrofishing to characterize fish community structure

USGS Publications Warehouse

Meador, M.R.; McIntyre, J.P.; Pollock, K.H.

2003-01-01

Two-pass backpack electrofishing data collected as part of the U.S. Geological Survey's National Water-Quality Assessment Program were analyzed to assess the efficacy of single-pass backpack electrofishing. A two-capture removal model was used to estimate, within 10 river basins across the United States, proportional fish species richness from one-pass electrofishing and probabilities of detection for individual fish species. Mean estimated species richness from first-pass sampling (ps1) ranged from 80.7% to 100% of estimated total species richness for each river basin, based on at least seven samples per basin. However, ps1 values for individual sites ranged from 40% to 100% of estimated total species richness. Additional species unique to the second pass were collected in 50.3% of the samples. Of these, cyprinids and centrarchids were collected most frequently. Proportional fish species richness estimated for the first pass increased significantly with decreasing stream width for 1 of the 10 river basins. When used to calculate probabilities of detection of individual fish species, the removal model failed 48% of the time because the number of individuals of a species was greater in the second pass than in the first pass. Single-pass backpack electrofishing data alone may make it difficult to determine whether characterized fish community structure data are real or spurious. The two-pass removal model can be used to assess the effectiveness of sampling species richness with a single electrofishing pass. However, the two-pass removal model may have limited utility to determine probabilities of detection of individual species and, thus, limit the ability to assess the effectiveness of single-pass sampling to characterize species relative abundances. Multiple-pass (at least three passes) backpack electrofishing at a large number of sites may not be cost-effective as part of a standardized sampling protocol for large-geographic-scale studies. However, multiple-pass electrofishing at some sites may be necessary to better evaluate the adequacy of single-pass electrofishing and to help make meaningful interpretations of fish community structure.

Bridge-in-a-Backpack(TM). Task 8 : investigation of bridge performance under extreme temperatures.

DOT National Transportation Integrated Search

2014-12-01

This report includes fulfillment of Task 8 of a multi-task contract to further enhance concrete filled FRP tubes, or : the Bridge in a Backpack. : One recurring question has been its performance in fire conditions, mainly small campfires and handheld...

Bridge-in-a-Backpack(TM). Task 1 : investigation of span lengths up to 70 feet.

DOT National Transportation Integrated Search

2011-08-01

The Bridge-in-a-Backpack has previously been demonstrated with short spans. The first : constructed one, Neal Bridge in Pittsfield, Maine had a span of 34 feet. This task includes : research and development that demonstrates the technology can be ...

Lightweight Passive Microclimate Cooling Device

DTIC Science & Technology

1993-03-01

rabrication. No consideration was given to weight. We have examined alternate methods of construction of the backpack and cylinder assembly and thin...13 Figure 7. Water Adsorption on Magnesium Chloride ........... 14 Figure 8. Cylinder Assembly ................................ 20...Figure 9. Backpack Assembly ............................... 21 Figure 10. Unwrapped Vest ................................... 22 Figure 11. Adsorption

Space Shuttle Projects

NASA Image and Video Library

1994-09-16

Astronaut Mark Lee floats freely as he tests the new backpack called the Simplified Aid for EVA Rescue (SAFER) system. SAFER is designed for use in the event a crew member becomes untethered while conducting an EVA. The STS-64 mission marked the first untethered U.S. EVA in 10 years, and was launched on September 9, 1994, aboard the Space Shuttle Orbiter Discovery.

Bridge-in-a-backpack(TM) task 4 : development of improved arch concrete mix to facilitate field use.

DOT National Transportation Integrated Search

2016-02-01

This report includes fulfillment of Task 4 of a multi-task contract to further enhance concrete filled FRP tubes, or : the Bridge in a Backpack. Task 4 investigates the development of improved concrete mixes for filling the FRP : tubes. : One critica...

Bridge-in-a-Backpack(TM) task 4 : development of improved arch concrete mix to facilitate field use.

DOT National Transportation Integrated Search

2016-02-01

This report includes fulfillment of Task 4 of a multi-task contract to further enhance concrete filled FRP tubes, or : the Bridge in a Backpack. Task 4 investigates the development of improved concrete mixes for filling the FRP : tubes. : One critica...

Bridge-in-a-Backpack(TM) task 6 : guidelines for long term inspection and maintenance.

DOT National Transportation Integrated Search

2016-01-01

This report includes fulfillment of Task 6 of a multi-task contract to further enhance concrete filled FRP tubes, or the Bridge in a Backpack. Task 6 provides guidelines for long term inspection and maintenance.This bridge consists of a buried arch s...

International Learning Adventures: A Phenomenological Exploration of International Backpacker Style Study Abroad

ERIC Educational Resources Information Center

Thatcher, Chad Alan

2010-01-01

Self-awareness, cultural competency, environmental consciousness, and economic empathy are often achieved through study abroad travel experiences. This phenomenological study was intended to shed light on the international backpacking study abroad experiences for college students, describing the phenomenon from the perspective of the participants…

Bridge-in-a-Backpack(TM) task 6 : guidelines for long term inspection and maintenance.

DOT National Transportation Integrated Search

2016-01-01

This report includes fulfillment of Task 6 of a multi-task contract to further enhance concrete filled FRP tubes, or : the Bridge in a Backpack. Task 6 provides guidelines for long term inspection and maintenance. : This bridge consists of a buried a...

Assessment of the "Bridge in a Backpack" bridge system from Advanced Infrastructure Technologies (AIT).

DOT National Transportation Integrated Search

2014-12-01

The Vermont Agency of Transportation (VTrans) installed a Bridge in a Backpack (BiaB) : system, or also referred to as a Rigified FRP Tube Arch (RFTA) Structure on a low volume : road in a rural setting. The value of using this system is the potentia...

Current Backpack Weight Status for Primary Schoolchildren in Colima, Mexico

ERIC Educational Resources Information Center

Olmedo-Buenrostro, Bertha Alicia; Delgado-Enciso, Iván; Sánchez-Ramírez, Carmen Alicia; Cruz, Sergio Adrián Montero; Vásquez, Clemente; Mora-Brambila, Ana Bertha; Rodríguez-Sánchez, Iram P.; Martínez-Fierro, Margarita L.

2016-01-01

The purpose of the study was to identify the current status of backpack weight in primary schoolchildren in Colima, Mexico, in relation to gender, school grade level, and body mass index. A cross-sectional study was conducted on 240 randomly selected children from 20 primary schools. The participating children's parents signed statements of…

Carrying Backpacks: Physical Effects

ERIC Educational Resources Information Center

Illinois State Board of Education, 2006

2006-01-01

It is estimated that more than 40 million U.S. youth carry school materials in backs, routinely carrying books, laptop computers, personal and other items used on a daily basis. The Consumer Product Safety Commission (CPSC) estimates that 7,277 emergency visits each year result from injuries related to backpacks. Injury can occur when a child…

Bridge-in-a-Backpack(TM). Task 2.1 and 2.2 : investigate alternative shapes with varying radii.

DOT National Transportation Integrated Search

2015-02-01

This report includes fulfillment of Tasks 2.1 and 2.2 of a multi-task contract to further enhance concrete filled FRP : tubes, or the Bridge in a Backpack. Task 2 is an investigation of alternative shapes for the FRP tubes with varying : radii. Task ...

Bridge-in-a-Backpack(TM). Task 7 : investigation of damage and repairs for concrete filled FRP tubular arches.

DOT National Transportation Integrated Search

2015-04-01

This report includes fulfillment of Task 7 of a multi-task contract to further enhance concrete filled FRP tubes, or : the Bridge in a Backpack. : Damage due to impact of the FRP shell of the concrete filled FRP tubular arch bridges has been and stil...

The Contents of My Backpack

ERIC Educational Resources Information Center

Goldman, Arthur

2004-01-01

As Mr. Goldman empties his backpack, his philosophy of teaching spills out, along with an interesting assortment of odds and ends. In this article Mr. Goldman describes the contents of his L.L. Bean daypack with two large compartments in the back, a smaller forward compartment, and a little zippered pocket in the very front, along with his…

Awareness, practices, and health problems of backpackers traveling during flooding in Thailand during 2011.

PubMed

Piyaphanee, Watcharapong; Olanwijitwong, Jutarmas; Kusolsuk, Teera; Silachamroon, Udomsak

2012-09-01

During late 2011, Thailand experienced its worst flooding in 50 years with over 4.6 million people directly affected. During the flooding we conducted a cross sectional survey of backpackers in the Khao San Road area of Bangkok to determine awareness, practices, and their incidence of health problems during the flooding. A total of 422 subjects completed questionnaires which were analyzed. Seventy percent were European and 12.3% were North American. The overall median age was 27 years and the median stay in Thailand was 22 days. Most of the backpackers were aware of the flooding in Thailand; some had sought travel health information prior to their trip from various sources including the internet, their family physician or a travel clinic. However, even in travel clinics specific health advice related to flooding, such as leptospirosis risk/prevention, was rarely given to travelers. Fifteen point four percent of subjects (65/422) had come into contact with floodwater; 30.8% of those (20/65) washed their feet/legs afterward. Our findings indicate most backpackers were inadequately aware of potential health hazards, such as leptospirosis, during the floods.

Macrophages with cellular backpacks for targeted drug delivery to the brain.

PubMed

Klyachko, Natalia L; Polak, Roberta; Haney, Matthew J; Zhao, Yuling; Gomes Neto, Reginaldo J; Hill, Michael C; Kabanov, Alexander V; Cohen, Robert E; Rubner, Michael F; Batrakova, Elena V

2017-09-01

Most potent therapeutics are unable to cross the blood-brain barrier following systemic administration, which necessitates the development of unconventional, clinically applicable drug delivery systems. With the given challenges, biologically active vehicles are crucial to accomplishing this task. We now report a new method for drug delivery that utilizes living cells as vehicles for drug carriage across the blood brain barrier. Cellular backpacks, 7-10 μm diameter polymer patches of a few hundred nanometers in thickness, are a potentially interesting approach, because they can act as drug depots that travel with the cell-carrier, without being phagocytized. Backpacks loaded with a potent antioxidant, catalase, were attached to autologous macrophages and systemically administered into mice with brain inflammation. Using inflammatory response cells enabled targeted drug transport to the inflamed brain. Furthermore, catalase-loaded backpacks demonstrated potent therapeutic effects deactivating free radicals released by activated microglia in vitro. This approach for drug carriage and release can accelerate the development of new drug formulations for all the neurodegenerative disorders. Copyright © 2017. Published by Elsevier Ltd.

Effects of Different Backpack Loads in Acceleration Transmission during Recreational Distance Walking.

PubMed

Lucas-Cuevas, Angel G; Pérez-Soriano, Pedro; Bush, Michael; Crossman, Aaron; Llana, Salvador; Cortell-Tormo, Juan M; Pérez-Turpin, José A

2013-01-01

It is well established nowadays the benefits that physical activity can have on the health of individuals. Walking is considered a fundamental method of movement and using a backpack is a common and economical manner of carrying load weight. Nevertheless, the shock wave produced by the impact forces when carrying a backpack can have detrimental effects on health status. Therefore, the aim of this study was to investigate differences in the accelerations placed on males and females whilst carrying different loads when walking. Twenty nine sports science students (16 males and 13 females) participated in the study under 3 different conditions: no weight, 10% and 20% body weight (BW) added in a backpack. Accelerometers were attached to the right shank and the centre of the forehead. Results showed that males have lower accelerations than females both in the head (2.62 ± 0.43G compared to 2.83 + 0.47G) and shank (1.37 ± 0.14G compared to 1.52 ± 0.15G; p<0.01). Accelerations for males and females were consistent throughout each backpack condition (p>0.05). The body acts as a natural shock absorber, reducing the amount of force that transmits through the body between the foot (impact point) and head. Anthropometric and body mass distribution differences between males and females may result in women receiving greater impact acceleration compared to men when the same load is carried.

Effects of Different Backpack Loads in Acceleration Transmission during Recreational Distance Walking

PubMed Central

Lucas-Cuevas, Angel G.; Pérez-Soriano, Pedro; Bush, Michael; Crossman, Aaron; Llana, Salvador; Cortell-Tormo, Juan M.; Pérez-Turpin, José A.

It is well established nowadays the benefits that physical activity can have on the health of individuals. Walking is considered a fundamental method of movement and using a backpack is a common and economical manner of carrying load weight. Nevertheless, the shock wave produced by the impact forces when carrying a backpack can have detrimental effects on health status. Therefore, the aim of this study was to investigate differences in the accelerations placed on males and females whilst carrying different loads when walking. Twenty nine sports science students (16 males and 13 females) participated in the study under 3 different conditions: no weight, 10% and 20% body weight (BW) added in a backpack. Accelerometers were attached to the right shank and the centre of the forehead. Results showed that males have lower accelerations than females both in the head (2.62 ± 0.43G compared to 2.83 + 0.47G) and shank (1.37 ± 0.14G compared to 1.52 ± 0.15G; p<0.01). Accelerations for males and females were consistent throughout each backpack condition (p>0.05). The body acts as a natural shock absorber, reducing the amount of force that transmits through the body between the foot (impact point) and head. Anthropometric and body mass distribution differences between males and females may result in women receiving greater impact acceleration compared to men when the same load is carried. PMID:24146708

Controlled banked turns in coleopteran flight measured by a miniature wireless inertial measurement unit.

PubMed

Li, Yao; Cao, Feng; Thang Vo Doan, Tat; Sato, Hirotaka

2016-09-28

The mechanisms and principles of insect flight have long been investigated by researchers working on micro and nano air vehicles (MAVs/NAVs). However, studies of insect flight maneuvers require high speed filming and high spatial resolution in a small experimental space, or the tethering of the insect to a fixed place. Under such artificial conditions, the insects may deviate its flying behavior from that of regular flight. In this study, we mounted a tiny wireless system, or 'backpack', on live beetles (Mecynorrhina torquata; length 62 ± 8 mm; mass 7.4 ± 1.3 g) freely flying in a large laboratory space. The backpack contains a micro inertial measurement unit (IMU) that was especially designed and manufactured for this purpose. Owing to the small mass (∼1.30 g) and dimensions (∼2.3 cm 2 ) of the backpack and the high accuracy of the IMU, we could remotely record the beetle in free flight. The free flight data revealed a strong linear correlation between the roll angle and yaw angular velocity. The strength of the correlation was quantified by the correlation coefficients and mean values. The change in roll angle preceded the change in yaw angular velocity. Moreover, there were frequent fluctuations in the roll angular velocity, which were uncorrelated with the yaw angular velocity. Apart from the strong correlation, these findings imply that Mecynorrhina torquata actively manipulates its roll rotation without coupling to the yaw rotation.

Effects of stock use and backpackers on water quality in wilderness in Sequoia and Kings Canyon National Parks, USA.

PubMed

Clow, David W; Forrester, Harrison; Miller, Benjamin; Roop, Heidi; Sickman, James O; Ryu, Hodon; Domingo, Jorge Santo

2013-12-01

During 2010-2011, a study was conducted in Sequoia and Kings Canyon National Parks (SEKI) to evaluate the influence of pack animals (stock) and backpackers on water quality in wilderness lakes and streams. The study had three main components: (1) a synoptic survey of water quality in wilderness areas of the parks, (2) paired water quality sampling above and below several areas with differing types and amounts of visitor use, and (3) intensive monitoring at six sites to document temporal variations in water quality. Data from the synoptic water quality survey indicated that wilderness lakes and streams are dilute and have low nutrient and Escherichia coli concentrations. The synoptic survey sites were categorized as minimal use, backpacker-use, or mixed use (stock and backpackers), depending on the most prevalent type of use upstream from the sampling locations. Sites with mixed use tended to have higher concentrations of most constituents (including E. coli) than those categorized as minimal-use (P ≤ 0.05); concentrations at backpacker-use sites were intermediate. Data from paired-site sampling indicated that E. coli, total coliform, and particulate phosphorus concentrations were greater in streams downstream from mixed-use areas than upstream from those areas (P ≤ 0.05). Paired-site data also indicated few statistically significant differences in nutrient, E. coli, or total coliform concentrations in streams upstream and downstream from backpacker-use areas. The intensive-monitoring data indicated that nutrient and E. coli concentrations normally were low, except during storms, when notable increases in concentrations of E. coli, nutrients, dissolved organic carbon, and turbidity occurred. In summary, results from this study indicate that water quality in SEKI wilderness generally is good, except during storms; and visitor use appears to have a small, but statistically significant influence on stream water quality.

Effects of Stock Use and Backpackers on Water Quality in Wilderness in Sequoia and Kings Canyon National Parks, USA

NASA Astrophysics Data System (ADS)

Clow, David W.; Forrester, Harrison; Miller, Benjamin; Roop, Heidi; Sickman, James O.; Ryu, Hodon; Domingo, Jorge Santo

2013-12-01

During 2010-2011, a study was conducted in Sequoia and Kings Canyon National Parks (SEKI) to evaluate the influence of pack animals (stock) and backpackers on water quality in wilderness lakes and streams. The study had three main components: (1) a synoptic survey of water quality in wilderness areas of the parks, (2) paired water quality sampling above and below several areas with differing types and amounts of visitor use, and (3) intensive monitoring at six sites to document temporal variations in water quality. Data from the synoptic water quality survey indicated that wilderness lakes and streams are dilute and have low nutrient and Escherichia coli concentrations. The synoptic survey sites were categorized as minimal use, backpacker-use, or mixed use (stock and backpackers), depending on the most prevalent type of use upstream from the sampling locations. Sites with mixed use tended to have higher concentrations of most constituents (including E. coli) than those categorized as minimal-use ( P ≤ 0.05); concentrations at backpacker-use sites were intermediate. Data from paired-site sampling indicated that E. coli, total coliform, and particulate phosphorus concentrations were greater in streams downstream from mixed-use areas than upstream from those areas ( P ≤ 0.05). Paired-site data also indicated few statistically significant differences in nutrient, E. coli, or total coliform concentrations in streams upstream and downstream from backpacker-use areas. The intensive-monitoring data indicated that nutrient and E. coli concentrations normally were low, except during storms, when notable increases in concentrations of E. coli, nutrients, dissolved organic carbon, and turbidity occurred. In summary, results from this study indicate that water quality in SEKI wilderness generally is good, except during storms; and visitor use appears to have a small, but statistically significant influence on stream water quality.

Effects of stock use and backpackers on water quality in wilderness in Sequoia and Kings Canyon National Parks, USA

USGS Publications Warehouse

Clow, David W.; Forrester, Harrison; Miller, Benjamin; Roop, Heidi; Sickman, James O.; Ryu, Hodon; Santo Domingo, Jorge

2013-01-01

During 2010-2011, a study was conducted in Sequoia and Kings Canyon National Parks (SEKI) to evaluate the influence of pack animals (stock) and backpackers on water quality in wilderness lakes and streams. The study had three main components: (1) a synoptic survey of water quality in wilderness areas of the parks, (2) paired water-quality sampling above and below several areas with differing types and amounts of visitor use, and (3) intensive monitoring at six sites to document temporal variations in water quality. Data from the synoptic water-quality survey indicated that wilderness lakes and streams are dilute and have low nutrient and Escherichia coli (E. coli) concentrations. The synoptic survey sites were categorized as minimal use, backpacker use, or mixed use (stock and backpackers), depending on the most prevalent type of use upstream from the sampling locations. Sites with mixed use tended to have higher concentrations of most constituents (including E.coli) than those categorized as minimal-use (p≤0.05); concentrations at backpacker-use sites were intermediate. Data from paired-site sampling indicated that E.coli, total coliform, and particulate phosphorus concentrations were greater in streams downstream from mixed-use areas than upstream from those areas (p≤0.05). Paired-site data also indicated few statistically significant differences in nutrient, E. coli, or total coliform concentrations in streams upstream and downstream from backpacker-use areas. The intensive-monitoring data indicated that nutrient and E. coli concentrations normally were low, except during storms, when notable increases in concentrations of E.coli, nutrients, dissolved organic carbon, and turbidity occurred. In summary, results from this study indicate that water quality in SEKI wilderness generally is good, except during storms; and visitor use appears to have a small, but statistically significant influence on stream water quality.

The impact of carrying supplemental oxygen on exercise capacity and dyspnea in patients with interstitial lung disease.

PubMed

Ramadurai, Deepa; Riordan, Maeveen; Graney, Bridget; Churney, Tara; Olson, Amy L; Swigris, Jeffrey J

2018-05-01

May patients with interstitial lung disease (ILD) require supplementary oxygen (O 2 ) therapy to maintain normoxia. However, ambulatory O 2 delivery devices are constraining and cumbersome. The physiologic and symptomatic impact of these devices on ILD patients is unknown. We conducted a prospective study of 30 clinically stable ILD patients (with varying disease severity), half of whom used O 2 at baseline. Each subject completed two six-minute walk tests (6MWTs); for O 2 users, one walk was completed while wearing a backpack (weight 7.2 pounds) containing a tank with compressed O 2 , and for non-users, one walk was completed with a similarly-weighted backpack. For each subject, during the second walk, no backpack was worn; for the second walk, O 2 users received oxygen via a stationary delivery system. For both walks, O 2 non-users wore a portable metabolic system, which measured variables related to respiratory physiology and gas exchange. Borg dyspnea and exertion ratings were recorded after each walk. Wearing the O 2 -containing backpack resulted in decreased distance covered during the 6MWT, and increased dyspnea and perceived exertion among O 2 users. While wearing the weighted backpack, O 2 non-users had a significantly lower peripheral O 2 saturation and distance-saturation product. Compared with carrying O 2 in the backpack, receiving O 2 via the stationary concentrator resulted in the largest improvement in walk distance for the three subjects with greatest impairment at baseline (6MWT ≤ 300 m). Among ILD patients, carrying portable O 2 versus receiving O 2 via a stationary concentrator results in significantly greater dyspnea and shorter distances covered in timed testing. Patients with the greatest impairment may be affected most. When prescribing O 2 , practitioners should alert patients to this effect and help patients decide on the best O 2 delivery mode to meet their needs. Copyright © 2018 Elsevier Ltd. All rights reserved.

You Alone in the North Woods: The Lost Hunter's Guide.

ERIC Educational Resources Information Center

New Hampshire State Fish and Game Dept., Concord.

Although designed for the lost hunter, this 4 by 5 1/2 inch handbook of survival guidelines is compact enough to be included in the backpack of anyone venturing on an outdoor, wilderness expedition in the north woods. Twenty-one major sections provide information and some illustrations about: what to include in a survival kit; the importance of…

TOTE Project. A Curriculum Source Book for Teaching Human Relations, Environmental Education, and Camping Skills in the Classroom and on the Trail.

ERIC Educational Resources Information Center

Maughan, Durrell A.; And Others

Backpacking serves as the vehicle for teaching basic secondary school subjects in this curriculum guide which suggests various learning activities for teaching human relations, environmental education, and camping. The activities, some for the classroom and some for the trail, are designed to help students observe, draw conclusions, and develop…

Bridge-in-a-backpack(TM) : task 3.2: investigating soil - structure interaction - modeling and experimental results of steel arches.

DOT National Transportation Integrated Search

2015-07-01

This report includes fulfillment of Task 3.2 of a multi-task contract to further enhance concrete filled FRP tubes, or : the Bridge in a Backpack. Task 3 is an investigation of soil-structure interaction for the FRP tubes. Task 3.2 is the : modeling ...

Bridge-in-a-backpack(TM) task 3.3 : investigate soil-structure interaction-modeling and experimental results of concrete filled FRP tube arches.

DOT National Transportation Integrated Search

2015-12-01

This report includes fulfillment of Task 3.3 of a multi-task contract to further enhance concrete filled FRP tubes, or : the Bridge in a Backpack. Task 3 is an investigation of soil-structure interaction for the FRP tubes. Task 3.3 is the : modeling ...

The Backpack Food Program's Effects on U.S. Elementary Students' Hunger and On-Task Behavior

ERIC Educational Resources Information Center

Ecker, Meghan E.; Sifers, Sarah K.

2013-01-01

Purpose/Objectives: The purpose of this study was to evaluate the BackPack Food Program's effectiveness in combating students' hunger over the weekends and school breaks, as well as analyze the program's effects on students' on-task behavior in the classroom. Additionally, this study examined program satisfaction from students, parents, and…

Camping and Backpacking. A Guide to Information Sources. Volume 2 in the Sports, Games and Pastimes Information Guide Series.

ERIC Educational Resources Information Center

Clotfelter, Cecil F.; Clotfelter, Mary L.

Sources of information regarding camping, backpacking, and related activities are annotated in a comprehensive listing of books, films and other non-print media, pamphlets, and periodicals largely dating from 1960. The volume contains chapters pertaining to: general directories, general camping, organized camping, camp related activities,…

The Family Backpack Project: Responding to Dual-Language Texts through Family Journals

ERIC Educational Resources Information Center

Rowe, Deborah; Fain, Jeanne Gilliam

2013-01-01

The Family Backpack Project provided 249 low-income, prekindergarten children and their families with opportunities to read and listen to audio recordings of 3 sets of books in their homes. Families received English or dual-language texts (English plus Spanish, Arabic, Kurdish, or Somali) matched to their home languages. Children and their…

Bridge-in-a-Backpack(TM). Task 2.3 : low-rise arch study with soil-structure interaction and spread footing foundation.

DOT National Transportation Integrated Search

2015-01-01

This report includes fulfillment of Task 2.3 of a multi-task contract to further enhance concrete filled FRP tubes, or : the Bridge in a Backpack. Task 2 is an investigation of alternative shapes for the FRP tubes with varying radii. Task : 2.3 explo...

Back-pack unit for capturing waterfowl and upland game by night-lighting

USGS Publications Warehouse

Drewien, R.C.; Reeves, H.M.; Springer, P.F.; Kuck, T.L.

1967-01-01

A night-lighting unit, designed as a light weight back-pack, proved successful for capturing waterfowl pairs, pheasants (Phasianus colchicus), and cottontail rabbits (Sylvilagus floridanus) during the spring and summer when most breeding populations are widely dispersed. Eighty ducks of seven species were captured in 48 hours (1.7 ducks per hour) of night-lighting in marsh habitat. Similarly, 30 pheasants were trapped in 25 hours (1.2 birds per hour) and 63 cottontail rabbits were either observed at close range (6-12 ft) or captured during night-lighting operations in upland habitat. Catch per hour of effort increased for all species as their night habitat requirements and reaction to night-lights became known. The mobile unit proved well suited for intensive use on small areas where other methods of capture were unfeasible and where representative coverage of various habitat types was desired. Besides its utility for capturing animals, the unit provided a method for studying nocturnal movements, behavior, and habitat use of marked animals.

A New TS Algorithm for Solving Low-Carbon Logistics Vehicle Routing Problem with Split Deliveries by Backpack—From a Green Operation Perspective

PubMed Central

Fu, Zhuo; Wang, Jiangtao

2018-01-01

In order to promote the development of low-carbon logistics and economize logistics distribution costs, the vehicle routing problem with split deliveries by backpack is studied. With the help of the model of classical capacitated vehicle routing problem, in this study, a form of discrete split deliveries was designed in which the customer demand can be split only by backpack. A double-objective mathematical model and the corresponding adaptive tabu search (TS) algorithm were constructed for solving this problem. By embedding the adaptive penalty mechanism, and adopting the random neighborhood selection strategy and reinitialization principle, the global optimization ability of the new algorithm was enhanced. Comparisons with the results in the literature show the effectiveness of the proposed algorithm. The proposed method can save the costs of low-carbon logistics and reduce carbon emissions, which is conducive to the sustainable development of low-carbon logistics. PMID:29747469

Gender differences among long-distance backpackers: A prospective study of women Appalachian Trail backpackers.

PubMed

Boulware, David R

2004-01-01

Backpacking is a popular recreational activity, yet the differential experiences of women are unknown. The objective was to compare women with men backpackers to determine the extent to which injuries and illnesses limit endurance outdoor recreational activities. This was a prospective cohort surveillance survey of 334 persons who hiked the Appalachian Trail for > or =7 days. At the end of their hike, 280 subjects completed a questionnaire. Male hikers served as controls for injury and illness. Women comprised 26% (72 of 280) of the sample. The mean (+/-SD) duration of hiking was 144 +/- 66 days covering 1570 +/- 680 miles. Fifty-seven percent (41 of 72) of women and 72% (150 of 208) of men attained their goal (P = .02). The occurrence of individual musculoskeletal problems, such as strains, sprains, arthralgias, tendonitis, and fractures, were similar (P = .9) between sexes. The occurrence of diarrhea (56%) was also similar (relative risk [RR] 1.0; P = .9) between sexes. Of regularly menstruating women, 87% (43 of 49) had menstrual changes while hiking, such as change in frequency (45%) or character (43%) (RR 3.1; 95% CI, 2.0-4.8; P < .001). Shortened duration of menses was most common (41%). Amenorrhea occurred in 22% (11 of 49) of women, including 5 of 25 taking oral contraceptive pills (OCPs). Breakthrough, midcycle bleeding occurred in 20% (10 of 49) of women. Women had similar experiences as compared with men when backpacking. Menstrual changes were very common including amenorrhea. Prolonged amenorrhea raises concern for potential bone mineral density loss, and OCPs should be considered to prevent such loss.

Backpack Weight and the Scaling of the Human Frame--II

ERIC Educational Resources Information Center

O'Shea, Michael J.

2018-01-01

The backpack weight a hiker is capable of carrying depends on several factors. These include the hiker's weight, body mass index (BMI), fitness, and training. It can also depend on the terrain on which the hiker travels, e.g., off-trail or on-trail. However, online advice has tended to focus on the hiker's weight and suggests that pack weight…

Confirmation of the Conditional Outdoor Leadership Theory.

ERIC Educational Resources Information Center

Dixon, Tim; Priest, Simon

1991-01-01

Responses of 75 expert outdoor leaders from Canada and the United States concerning leadership in 12 hypothetical backpacking scenarios provided partial support for a theory that predicted probability of leadership style (democratic, autocratic, or abdicratic) based on favorability of conditions, task orientation, and relationship orientation.…

Effects of Backpack Carriage on Dual-Task Performance in Children During Standing and Walking.

PubMed

Beurskens, Rainer; Muehlbauer, Thomas; Grabow, Lena; Kliegl, Reinhold; Granacher, Urs

2016-01-01

Primary school children perform parts of their everyday activities while carrying school supplies and being involved in attention-demanding situations. Twenty-eight children (8-10 years old) performed a 1-legged stance and a 10 m walking test under single- and dual-task situations in unloaded (i.e., no backpack) and loaded conditions (i.e., backpack with 20% of body mass). Results showed that load carriage did not significantly influence children's standing and walking performance (all p > .05), while divided attention affected all proxies of walking (all p < .001). Last, no significant load by attention interactions was detected. The single application of attentional but not load demand negatively affects children's walking performance. A combined application of both did not further deteriorate their gait behavior.

Load-Speed Interaction Effects on the Biomechanics of Backpack Load Carriage

DTIC Science & Technology

2001-05-01

Duchenn muscular dystrophy . Developmental Med and Child Neurology, 23:3- 22, 1981. 39. Winter, D.A. Biomechanics of Human Movement. John Wiley & Sons, Inc...and C.J. De Luca. Muscle fatigue monitor: A noninvasive device for observing localized muscular fatigue. IEEE Transactions on Biomedical Engineering...joint forces, muscle torques, muscle electrical activity and backpack acceleration increased when speed andlor load increased, likely increasing the

What's in Your Back Pack? Three Essential Items for Survival in the Tough and Changing World of Campus Construction

ERIC Educational Resources Information Center

del Monte, Rick

2009-01-01

As students know, the tools in their backpacks can influence success. If they are off to math class, a good calculator is essential. When on their way to English class, a laptop is fundamental. Building facility executives too have tools in their backpacks to assure the successful creation of educational buildings. Only their tools are…

Quality of life, school backpack weight, and nonspecific low back pain in children and adolescents.

PubMed

Macedo, Rosangela B; Coelho-e-Silva, Manuel J; Sousa, Nuno F; Valente-dos-Santos, João; Machado-Rodrigues, Aristides M; Cumming, Sean P; Lima, Alessandra V; Gonçalves, Rui S; Martins, Raul A

2015-01-01

To describe the degree of disability, anthropometric variables, quality of life (QoL), and school backpack weight in boys and girls aged 11-17 years. The differences in QoL between those who did or did not report low back pain (LBP) were also analyzed. Eighty-six girls (13.9 ± 1.9 years of age) and 63 boys (13.7 ± 1.7 years of age) participated. LBP was assessed by questionnaire, and disability using the Roland-Morris Disability Questionnaire. QoL was assessed by the Pediatric Quality of Life Inventory (PedsQL). Multivariate analyses of variance and covariance were used to assess differences between groups. Girls reported higher disability than boys (p = 0.01), and lower QoL in the domains of physical (p < 0.001) and emotional functioning (p < 0.01), psychosocial health (p = 0.02) and physical health summary score (p < 0.001), and on the total PedsQL score (p < 0.01). School backpack weight was similar in both genders (p = 0.61) and in participants with and without LBP (p = 0.15). After adjustments, participants with LBP reported lower physical functioning (p < 0.01), influencing lower physical health summary score (p < 0.01). Girls had higher disability and lower QoL than boys in the domains of physical and emotional functioning, psychosocial health, and physical health summary scores, and on the total PedsQL score; however, similar school backpack weight was reported. Participants with LBP revealed lower physical functioning and physical health summary score, yet had similar school backpack weight to those without LBP. Copyright © 2015 Sociedade Brasileira de Pediatria. Published by Elsevier Editora Ltda. All rights reserved.

Fabric Structures Team Technology Update

DTIC Science & Technology

2011-11-01

Command Posts – • Julia McAdams – Chemical Engineer • Liz Swisher – Electrical Engineer • Chris Aall – Mechanical Engineer • Clinton McAdams...TEMPER design originally built for AMED through Force Provider (640 sq ft with a 20 ft long airlock) • The entire airlock is made of textiles and...Activity (USAMMDA) UNCLASSIFIED Large Command Post Airbeam Shelter NSRDEC Deployment – Sept 2011 UNCLASSIFIED Airbeam & Frame Backpackable Tents • Primary

Travel style is a major risk factor for diarrhoea in India: a prospective cohort study.

PubMed

Schindler, V M; Jaeger, V K; Held, L; Hatz, C; Bühler, S

2015-07-01

Although some studies suggested specific foods/beverages as risk factors for travellers' diarrhoea (TD), details of transmission remain unclear. We assessed the influence of travel style (luxury/middle-class versus backpacking) on TD risk. TD attack rates were compared in a prospective study among travellers to India at the University of Zurich's Travel Clinic. Information on consumption of foods/beverages was collected. Seventy-one luxury/middle-class travellers and 21 backpackers completed the study; overall 37% suffered from TD (62% backpackers, 30% luxury/middle-class travellers, OR 4.43, p 0.022). Travel style rather than the consumption of specific foods/beverages appears to be a risk factor for TD development. Copyright © 2015 European Society of Clinical Microbiology and Infectious Diseases. Published by Elsevier Ltd. All rights reserved.

[The set of wearable medical equipment for medical and nursing teams].

PubMed

Efimenko, N a; Valevskii, V V; Lyutov, V V; Makhnovskii, A I; Sorokin, S I; Blinda, I V

2015-06-01

The kit is designed in accordance with the list of the first medical aid procedures and syndromic standards of emergency medical care providing. The kit contains modern local hemostatic agents, vent tubes, cricothyrotomy, needles to eliminate pneumothorax, portable oxygen machine, sets for intravenous and intraosseous infusion therapy, collapsible plastic tires, anti-shock pelvic girdle, and other medical products and pharmaceuticals. As containers used backpack and trolley bag on wheels camouflage colours. For the convenience and safety of the personnel of the vest is designed discharge to be converted in the body armour.

Predicting the safe load on backpacker's arm using Lagrange multipliers method

NASA Astrophysics Data System (ADS)

Abdalla, Faisal Saleh; Rambely, Azmin Sham

2014-09-01

In this study, a technique has been suggested to reduce a backpack load by transmitting determined loads to the children arm. The purpose of this paper is to estimate school children arm muscles while load carriage as well as to determine the safe load can be carried at wrist while walking with backpack. A mathematical model, as three DOFs model, was investigated in the sagittal plane and Lagrange multipliers method (LMM) was utilized to minimize a quadratic objective function of muscle forces. The muscle forces were minimized with three different load conditions which are termed as 0-L=0 N, 1-L=21.95 N, and 2-L=43.9 N. The investigated muscles were estimated and compared to their maximum forces throughout the load conditions. Flexor and extensor muscles were estimated and the results showed that flexor muscles were active while extensor muscles showed inactivity. The estimated muscle forces were didn't exceed their maximum forces with 0-L and 1-L conditions whereas biceps and FCR muscles exceeded their maximum forces with 2-L condition. Consequently, 1-L condition is quiet safe to be carried by hand whereas 2-L condition is not. Thus to reduce the load in the backpack the transmitted load shouldn't exceed 1-L condition.

Effects of load mass carried in a backpack upon respiratory muscle fatigue.

PubMed

Faghy, Mark; Blacker, Sam; Brown, Peter I

2016-11-01

The purpose of this study was to investigate whether loads carried in a backpack, with a load mass ranging from 0 to 20 kg, causes respiratory muscle fatigue. Eight males performed four randomised load carriage (LC) trials comprising 60 min walking at 6.5 km h(-1) wearing a backpack of either 0 (LC0), 10 (LC10), 15 (LC15) or 20 kg (LC20). Inspiratory (PImax) and expiratory (PEmax) mouth pressures were assessed prior to and immediately following each trial. Pulmonary gas exchange, heart rate (HR), blood lactate and glucose concentration and perceptual responses were recorded during the first and final 60 s of each trial. Group mean PImax and PEmax were unchanged following 60-min load carriage in all conditions (p > .05). There was an increase over time in pulmonary gas exchange, HR and perceptions of effort relative to baseline measures during each trial (p < .05) with changes not different between trials (p > .05). These findings indicate that sub-maximal walking with no load or carrying 10, 15 or 20 kg in a backpack for up to 60 min does not cause respiratory muscle fatigue despite causing an increase in physiological, metabolic and perceptual parameters.

Biofuel cell backpacked insect and its application to wireless sensing.

PubMed

Shoji, Kan; Akiyama, Yoshitake; Suzuki, Masato; Nakamura, Nobuhumi; Ohno, Hiroyuki; Morishima, Keisuke

2016-04-15

This study investigated an enzymatic biofuel cell (BFC) which can be backpacked by cockroaches. The BFC generates electric power from trehalose in insect hemolymph by the trehalase and glucose dehydrogenase (GDH) reaction systems which dehydrogenate β-glucose obtained by hydrolyzing trehalose. First, an insect-mountable BFC (imBFC) was designed and fabricated with a 3D printer. The electrochemical reaction of anode-modified poly-L-lysine, vitamin K3, diaphorase, nicotinamide adenine dinucleotide, GDH and poly(sodium 4-styrenesulfonate) in the imBFC was evaluated and an oxidation current of 1.18 mAcm(-2) (at +0.6 V vs. Ag|AgCl) was observed. Then, the performance of the imBFC was evaluated and a maximum power output of 333 μW (285 μW cm(-)(2)) (at 0.5 V) was obtained. Furthermore, driving of both an LED device and a wireless temperature and humidity sensor device were powered by the imBFC. These results indicate that the imBFC has sufficient potential as a battery for novel ubiquitous robots such as insect cyborgs. Copyright © 2015 Elsevier B.V. All rights reserved.

The Impact of Nature Experience on Willingness to Support Conservation

PubMed Central

Zaradic, Patricia A.; Pergams, Oliver R. W.; Kareiva, Peter

2009-01-01

We hypothesized that willingness to financially support conservation depends on one's experience with nature. In order to test this hypothesis, we used a novel time-lagged correlation analysis to look at times series data concerning nature participation, and evaluate its relationship with future conservation support (measured as contributions to conservation NGOs). Our results suggest that the type and timing of nature experience may determine future conservation investment. Time spent hiking or backpacking is correlated with increased conservation contributions 11–12 years later. On the other hand, contributions are negatively correlated with past time spent on activities such as public lands visitation or fishing. Our results suggest that each hiker or backpacker translates to $200–$300 annually in future NGO contributions. We project that the recent decline in popularity of hiking and backpacking will negatively impact conservation NGO contributions from approximately 2010–2011 through at least 2018. PMID:19809511

Global UAS Proliferation Challenges USAF Air Superiority

DTIC Science & Technology

2016-01-18

wingspan or rotor -blade diameter less than six feet, can be concealed within the confines of a vehicle, suitcase or backpack, costs less than $25K... helicopters at designated locations governed by the rules and requirements of the local club’s airfield. With the arrival of electric, quiet, easy to...the strength and reliability of plastics and composites as a weight saver has allowed for tremendous capability in endless applications. A leader in

It's in the Bag: Digital Backpacks for Project-Based Learning

ERIC Educational Resources Information Center

Basham, James D.; Perry, Ernest; Meyer, Helen

2011-01-01

When it comes to technology, many schools know what they want. They want targeted and scalable solutions that enhance learning and meet the NETS.S. And the teachers in those schools want simple, strategic instructional frameworks for developing their students' basic and digital age skills while meeting diverse learning needs. But as many…

An analysis of wilderness water in Kings Canyon, Sequoia, and Yosemite national parks for coliform and pathologic bacteria.

PubMed

Derlet, Robert W; Carlson, James R

2004-01-01

To determine the prevalence of coliform and potentially pathogenic bacteria in remote backcountry alpine lakes and streams of national parks in the Sierra Nevada mountains. Water was sampled at 55 predetermined lakes and streams that would stratify the risk, based on sites used by backpackers, sites used by pack animals, and uncontaminated wild areas. Sites were distributed among Kings Canyon (15), Sequoia (17), and Yosemite (23). Water was collected using Millipore bacterial samplers, which provided specific counts of coliform and other bacteria in each water sample and also served as a transport media from the wilderness to the laboratory. On return to the laboratory, bacteria were harvested from the samplers and subjected to specific identification and qualitative analysis using standard microbiology techniques for the analysis of water. Coliform bacteria were detected in 22 of the 55 sites. All of these sites were below areas used by backpackers or pack animals. Thirty-three sites were free of coliforms. These sites included both those used lightly by backpackers and those with no human or domestic animal use. All samples contained expected amounts of normal aquatic bacteria including Pseudomonas, Rahnella aquatilis, Serratia spp, and nonpathogenic species of Yersinia. Most sampling sites in these national parks are free of coliform or pathogenic organisms. Low levels of coliform bacteria are found in some bodies of water where the watershed has been affected by human or pack animal travel.

Fast, Automated, Photo realistic, 3D Modeling of Building Interiors

DTIC Science & Technology

2016-09-12

project, we developed two algorithmic pipelines for GPS-denied indoor mobile 3D mapping using an ambulatory backpack system. By mounting scanning...equipment on a backpack system, a human operator can traverse the interior of a building to produce a high-quality 3D reconstruction. In each of our...Unlimited UU UU UU UU 12-09-2016 1-May-2011 30-Jun-2015 Final Report: Fast, Automated, Photo-realistic, 3D Modeling of Building Interiors (ATTN

Defense Science Board 1998 Summer Study. Joint Operations Superiority in the 21st Century: Integrating Capabilities Underwriting Joint Vision 2010 and Beyond. Volume 2: Supporting Reports

DTIC Science & Technology

1998-10-01

of motivation , acculturation, education, training and potentially action. This is a process of years. The timelines associated with each level of...payload and approximately $5K cost). This backpack robot clearly is most suited to visual scouting of threatening environments, including inside...Organic Man Portable, Ground Vehicle Backpack , Reusable Launch Techniques Command, Telemetry, and Image Return Deployment VTOL, Ship-Capable Autonomous

CTC Sentinel. Volume 2, Issue 1, January 2009. Al-Qa’ida’s Five Aspects of Power

DTIC Science & Technology

2009-01-01

far beyond message projection and brand awareness efforts. Indeed, the efforts to segment its audience have enabled a far more nuanced messaging...eight of the suspected terrorists, carrying backpacks and handbags, were spotted moving to another quarter of Barcelona’s old town, an urban...services cannot come.”10 Moreover, the explosive devices were to be carried in backpacks or bags—not around the body—ready for remote detonation

The effect of military load carriage on 3-D lower limb kinematics and spatiotemporal parameters.

PubMed

Birrell, Stewart A; Haslam, Roger A

2009-10-01

The 3-D gait analysis of military load carriage is not well represented, if at all, within the available literature. This study collected 3-D lower limb kinematics and spatiotemporal parameters in order to assess the subsequent impact of carrying loads in a backpack of up to 32 kg. Results showed the addition of load significantly decreased the range of motion of flexion/extension of the knee and pelvic rotation. Also seen were increases in adduction/abduction and rotation of the hip and pelvis tilt. No changes to ankle kinematics were observed. Alterations to the spatiotemporal parameters of gait were also of considerable interest, namely, an increase in double support and a decrease in preferred stride length as carried load increased. Analysing kinematics during military or recreational load carriage broadens the knowledge regarding the development of exercise-related injuries, while helping to inform the human-centred design process for future load carrying systems. The importance of this study is that limited available research has investigated 3-D lower limb joint kinematics when carrying loads.

Feasibility and demonstration of a cloud-based RIID analysis system

NASA Astrophysics Data System (ADS)

Wright, Michael C.; Hertz, Kristin L.; Johnson, William C.; Sword, Eric D.; Younkin, James R.; Sadler, Lorraine E.

2015-06-01

A significant limitation in the operational utility of handheld and backpack radioisotope identifiers (RIIDs) is the inability of their onboard algorithms to accurately and reliably identify the isotopic sources of the measured gamma-ray energy spectrum. A possible solution is to move the spectral analysis computations to an external device, the cloud, where significantly greater capabilities are available. The implementation and demonstration of a prototype cloud-based RIID analysis system have shown this type of system to be feasible with currently available communication and computational technology. A system study has shown that the potential user community could derive significant benefits from an appropriately implemented cloud-based analysis system and has identified the design and operational characteristics required by the users and stakeholders for such a system. A general description of the hardware and software necessary to implement reliable cloud-based analysis, the value of the cloud expressed by the user community, and the aspects of the cloud implemented in the demonstrations are discussed.

ADVANCED WORKER PROTECTION SYSTEM

DOE Office of Scientific and Technical Information (OSTI.GOV)

Judson Hedgehock

2001-03-16

From 1993 to 2000, OSS worked under a cost share contract from the Department of Energy (DOE) to develop an Advanced Worker Protection System (AWPS). The AWPS is a protective ensemble that provides the user with both breathing air and cooling for a NIOSH-rated duration of two hours. The ensemble consists of a liquid air based backpack, a Liquid Cooling Garment (LCG), and an outer protective garment. The AWPS project was divided into two phases. During Phase 1, OSS developed and tested a full-scale prototype AWPS. The testing showed that workers using the AWPS could work twice as long asmore » workers using a standard SCBA. The testing also provided performance data on the AWPS in different environments that was used during Phase 2 to optimize the design. During Phase 1, OSS also performed a life-cycle cost analysis on a representative clean up effort. The analysis indicated that the AWPS could save the DOE millions of dollars on D and D activities and improve the health and safety of their workers. During Phase 2, OSS worked to optimize the AWPS design to increase system reliability, to improve system performance and comfort, and to reduce the backpack weight and manufacturing costs. To support this design effort, OSS developed and tested several different generations of prototype units. Two separate successful evaluations of the ensemble were performed by the International Union of Operation Engineers (IUOE). The results of these evaluations were used to drive the design. During Phase 2, OSS also pursued certifying the AWPS with the applicable government agencies. The initial intent during Phase 2 was to finalize the design and then to certify the system. OSS and Scott Health and Safety Products teamed to optimize the AWPS design and then certify the system with the National Institute of Occupational Health and Safety (NIOSH). Unfortunately, technical and programmatic difficulties prevented us from obtaining NIOSH certification. Despite the inability of NIOSH to certify the design, OSS was able to develop and successfully test, in both the lab and in the field, a prototype AWPS. They clearly demonstrated that a system which provides cooling can significantly increase worker productivity by extending the time they can function in a protective garment. They were also able to develop mature outer garment and LCG designs that provide considerable benefits over current protective equipment, such as self donning and doffing, better visibility, and machine washable. A thorough discussion of the activities performed during Phase 1 and Phase 2 is presented in the AWPS Final Report. The report also describes the current system design, outlines the steps needed to certify the AWPS, discusses the technical and programmatic issues that prevented the system from being certified, and presents conclusions and recommendations based upon the seven year effort.« less

20. NBS SUIT LAB. TABLE WITH MISCELLANEOUS SUIT PARTS AND ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

20. NBS SUIT LAB. TABLE WITH MISCELLANEOUS SUIT PARTS AND TERRY WEST, A SPACE SUIT ASSEMBLY TECHNICIAN LOGGING SUIT PART DATA. PARTS ON THE TABLE ARE A HARD UPPER TORSO (HUT) (REAR LEFT), FULL HELMET (FRONT LEFT), TWO HELMETS WITHOUT PROTECTIVE VISORS, A PAIR OF GLOVES, AND A BACKPACK WITHOUT VOLUMETRIC COVER (REAR RIGHT). THE BACKPACK ATTACHES TO THE HUT TO MAKE-UP THE UPPER TORSO COMPONENTS OF THE SUIT. - Marshall Space Flight Center, Neutral Buoyancy Simulator Facility, Rideout Road, Huntsville, Madison County, AL

Investigative studies into the recovery of DNA from improvised explosive device containers.

PubMed

Hoffmann, Shane G; Stallworth, Shawn E; Foran, David R

2012-05-01

Apprehending those who utilize improvised explosive devices (IEDs) is a national priority owing to their use both domestically and abroad. IEDs are often concealed in bags, boxes, or backpacks to prevent their detection. Given this, the goal of the research presented was to identify IED handlers through postblast DNA recovery from IED containers. Study participants were asked to use backpacks for 11 days, after which they served as containers for pipe bombs. Eleven postdeflagration backpack regions likely to be handled were swabbed and analyzed via mini-short tandem repeats (miniSTRs) and alleles were called blind. An experimental consensus method was examined in which profiles from all regions were considered, to help identify spurious drop-in/out. Results were correct for all loci, except one that remained ambiguous. The results show that recovering DNA from IED containers is a viable approach for aiding in the identification of those who may have been involved in an IED event. © 2011 American Academy of Forensic Sciences.

Evaluation of a sticky trap for collecting Aedes (Stegomyia) adults in a dengue-endemic area in Thailand.

PubMed

Facchinelli, Luca; Koenraadt, Constantianus J M; Fanello, Caterina; Kijchalao, Udom; Valerio, Laura; Jones, James W; Scott, Thomas W; della Torre, Alessandra

2008-06-01

Development of new operational techniques for collection and monitoring of adult Stegomyia mosquitoes is considered a pressing need for surveillance and prevention of arboviruses. Here we report the results from a trial carried out in 2 dengue-endemic villages in Thailand to compare the ability to collect Aedes adults of a sticky trap versus a CDC backpack aspirator, which has been used routinely at the study area for entomological/epidemiological surveys. Our comparison was based on a comparable sampling effort required to carry out collections with 2 approaches. Over 19,000 specimens were collected, approximately 90% of which were Culex spp. Sticky traps collected significantly more Aedes aegypti and Aedes albopictus females than did backpack aspirators when located outdoors. The percentage of positive sticky-trap catches was double for Ae. aegypti and almost 20 times higher for Ae. albopictus. Operational benefits of the sticky trap are discussed within the context of the results obtained.

Recovery of brachial plexus lesions resulting from heavy backpack use: A follow-up case series

PubMed Central

2011-01-01

Background Brachial plexus lesions as a consequence of carrying a heavy backpack have been reported, but the typical clinical course and long-term consequences are not clear. Here we evaluated the clinical course and pattern of recovery of backpack palsy (BPP) in a large series of patients. Methods Thirty-eight consecutive patients with idiopathic BPP were identified from our population of 193,450 Finnish conscripts by means of computerised register. A physiotherapist provided instructions for proper hand use and rehabilitative exercises at disease onset. The patients were followed up for 2 to 8 years from the diagnosis. We also searched for genetic markers of hereditary neuropathy with pressure palsies. Mann-Whitney U-test was used to analyze continuous data. The Fischer's exact test was used to assess two-way tables. Results Eighty percent of the patients recovered totally within 9 months after the onset of weakness. Prolonged symptoms occurred in 15% of the patients, but daily activities were not affected. The weight of the carried load at the symptom onset significantly affected the severity of the muscle strength loss in the physiotherapeutic testing at the follow-up. The initial electromyography did not predict recovery. Genetic testing did not reveal de novo hereditary neuropathy with pressure palsies. Conclusions The prognosis of BPP is favorable in the vast majority of cases. Electromyography is useful for diagnosis. To prevent brachial plexus lesions, backpack loads greater than 40 kg should be avoided. PMID:21429232

Effectiveness of backpack electrofishing for removal of non-native fishes from a small warm-water stream

USGS Publications Warehouse

Ward, David L.; O'neill, Matthew W.; Ka'apu-Lyons, Cassie

2015-01-01

Electrofishing is commonly used when renovating small streams to remove nuisance fishes but the likelihood of complete eradication of unwanted species, particularly warm-water fishes, is unknown. In October of 2008, we electrofished Bonita Creek, a small stream with base flows (<0.56 m3/s) in southern Arizona, and then treated the stream with rotenone to kill all of the remaining fish and quantify the effectiveness of single and multiple-pass electro fishing. Six, 100-m transects were electro fished on three consecutive days followed by a single treatment with rotenone. Fish caught using electrofishing were identified, counted and removed from each transect daily and then compared to numbers of dead fish collected during the subsequent rotenone application. Electrofishing effectiveness was highly variable among transects. Single-pass electrofishing caught an average of 23% (95% CI=5 to 40%) of the fish present, and three-pass electrofishing on consecutive days caught on average 55% (95% CI=28 to 83%) of the fish in each transect. Native Arizona fishes were more susceptible to electrofishing (77 % captured) than non-native species (54% captured), though native fish were rare. Transects in Bonita Creek averaged 3.6±1.5 m wide and 0.25±0.20 m deep (max depth 1.2 m). Bonita Creek is a small first-order stream which exhibits ideal conditions for backpack electrofishing, yet we captured a relatively small percentage of the fish present. This suggests that complete removal of non-native warm-water fishes using backpack electrofishing is not likely to be successful, especially in larger more complex streams.

Extravehicular Activity/Air Traffic Control (EVA/ATC) test report. [communication links to the astronaut

NASA Technical Reports Server (NTRS)

Tomaro, D. J.

1982-01-01

During extravehicular activity (EVA), communications between the EVA astronaut and the space shuttle orbiter are maintained by means of transceiver installed in the environmental support system backpack. Onboard the orbiter, a transceiver line replaceable unit and its associated equipment performs the task of providing a communications link to the astronaut in the extravehicular activity/air traffic control (EVA/ATC) mode. Results of the acceptance tests that performed on the system designed and fabricated for EVA/ATC testing are discussed.

Army AL&T, April-June 2008

DTIC Science & Technology

2008-06-01

IR )/laser designator (LD)/laser range finder (LRF) sensor. The Class I UAS consists of a Class I UAV, a cen- tralized controller and a minimal set...utility of a backpackable, affordable, easy-to- operate and responsive reconnais- sance and surveillance system through experimentation. • Use EO/ IR ...ARMY AL&T 33APRIL - JUNE 2008 • “The IR sensor pinpointed the enemy even after the sun went down. We could have really used this in Iraq.” • “The UAV

Flexible Packaging Concept for a Space Suit Portable Life Support Subsystem

NASA Technical Reports Server (NTRS)

Thomas, Gretchen; Dillon, Paul; Oliver, Joe; Zapata, Felipe

2009-01-01

Neither the Shuttle Extravehicular Mobility Unit (EMU), the space suit currently used for space shuttle and International Space Station (ISS) missions, nor the Apollo EMU, the space suit successfully used on previous lunar missions, will satisfy the requirements for the next generation Constellation Program (CxP) lunar suit. The CxP system or Constellation Space Suit Element (CSSE) must be able to tolerate more severe environmental and use conditions than any previous system. These conditions include missions to the severely cold lunar poles and up to 100 Extravehicular Activity (EVA) excursions without ground maintenance. Much effort is focused on decreasing the mass and volume of the Portable Life Support Subsystem (PLSS) over previous suit designs in order to accommodate the required increase in functionality. This paper documents the progress of a conceptual packaging effort of a flexible backpack for the CSSE PLSS. The flexible backpack concept relies on a foam protection system to absorb, distribute, and dissipate the energy from falls on the lunar surface. Testing and analysis of the foam protection system concept that was conducted during this effort indicates that this method of system packaging is a viable solution.

Traveling with and through Your Backpack: A Personal Reflection on the Infrastructure of Science Education

ERIC Educational Resources Information Center

Sammel, Alison

2008-01-01

In this paper I respond to Ajay Sharma's "Portrait of a Science Teacher as a Bricoleur: A case study from India," by speaking to two aspects of the bricoleur: the subject and the discursive in relation to pedagogic perspective. I highlight that our subjectivities are negotiated based on the desires of the similar and competing discourses…

GEMINI-TITAN (GT)-9 - EXTRAVEHICULAR LIFE SUPPORT SYSTEM (ELSS) - ASTRONAUT MANEUVERING UNIT (AMU) - MSC

NASA Image and Video Library

1966-05-01

S66-33162 (May 1966) --- Test subject Fred Spross, Crew Systems Division, wears configured extravehicular spacesuit assembly and Extravehicular Life Support System chest pack. The spacesuit legs are covered with Chromel R, which is a cloth woven from stainless steel fibers, used to protect the suit and astronaut from the hot exhaust thrust of the Astronaut Maneuvering Unit backpack. The Gemini spacesuit, backpack and chest pack comprise the AMU, a system which is essentially a miniature manned spacecraft. Astronaut Eugene A. Cernan will wear the AMU during his Gemini-9A extravehicular activity (EVA). Photo credit: NASA

Determinants of pre-exposure rabies vaccination among foreign backpackers in Bangkok, Thailand.

PubMed

Gautret, Philippe; Tantawichien, Terapong; Vu Hai, Vinh; Piyaphanee, Watcharapong

2011-05-23

Important variations were observed regarding the proportion of backpackers seeking information about travel-associated diseases before departing for Thailand. The main determinants were nationality, reason for travel and age. Sources of information used by travelers varied substantially according to nationality. Moreover, significant differences were recorded regarding pre-exposure vaccination rates against rabies. Having British or Irish citizenship and seeking advice from travel clinic specialists or friends were the strongest and most significant determinants of rabies vaccination history. A significant relationship between vaccine cost and vaccination coverage was also evidenced. Copyright © 2011 Elsevier Ltd. All rights reserved.

Rugged Video System For Inspecting Animal Burrows

NASA Technical Reports Server (NTRS)

Triandafils, Dick; Maples, Art; Breininger, Dave

1992-01-01

Video system designed for examining interiors of burrows of gopher tortoises, 5 in. (13 cm) in diameter or greater, to depth of 18 ft. (about 5.5 m), includes video camera, video cassette recorder (VCR), television monitor, control unit, and power supply, all carried in backpack. Polyvinyl chloride (PVC) poles used to maneuver camera into (and out of) burrows, stiff enough to push camera into burrow, but flexible enough to bend around curves. Adult tortoises and other burrow inhabitants observable, young tortoises and such small animals as mice obscured by sand or debris.

A Discussion of Knowledge Based Design

NASA Technical Reports Server (NTRS)

Wood, Richard M.; Bauer, Steven X. S.

1999-01-01

A discussion of knowledge and Knowledge- Based design as related to the design of aircraft is presented. The paper discusses the perceived problem with existing design studies and introduces the concepts of design and knowledge for a Knowledge- Based design system. A review of several Knowledge-Based design activities is provided. A Virtual Reality, Knowledge-Based system is proposed and reviewed. The feasibility of Virtual Reality to improve the efficiency and effectiveness of aerodynamic and multidisciplinary design, evaluation, and analysis of aircraft through the coupling of virtual reality technology and a Knowledge-Based design system is also reviewed. The final section of the paper discusses future directions for design and the role of Knowledge-Based design.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ainsworth, Nathan; Heaps, Colton; Symko-Davies, Martha

The purpose of this report is to propose a technical roadmap for power supply technology to power the Tactical Assault Light Operator Suit (TALOS), an armored, powered exoskeleton currently in development for U.S. Special Operations Command operators. TALOS' power supply system must meet size targets similar to the size of a large backpack while providing significant electrical power for an entire mission cycle without resupply. This report proposes a staged development path based on three fundamental technical approaches.

Effects of backpack radiotags on female northern pintails wintering in California

USGS Publications Warehouse

Fleskes, Joseph P.

2003-01-01

To test whether backpack radiotags impacted the wintering biology of northern pintails (Anas acuta), I attached spear-suture (SSU, n=82 in 1993) or harness (HAR, n=337 in 1991-1993) backpack radiotags to female Hatch-Year (HY) and After-Hatch-Year (AHY) pintails after their autumn arrival in California. I evaluated impacts of radiotags on 1) wintering population distribution; 2) flock status, flock size, and body mass at harvest; and 3) August-March survival. I also compared retention of SSU and HAR following attachment. Distribution, flock status, and flock size at harvest of HAR, SSU, and unmarked (UMK) pintails were similar. However, harvest mass of HAR pintails averaged 1 33 g (SE=25 g) less than UMK pintails; loss tended to be greatest for heavier HY females in 1 993. Daily survival rates during 1 993-1 994 of HAR vs. SSU pintails were similar for both HY (0.9979 vs. 0.9974) and AHY (0.9988 vs. 0.9986) female pintails. Retention ranged from 30-1 58 days (x=81 d, SE=5 d) for the 37 SSU that I confirmed as being shed; all other SSU failed 1-month studies due to poor retention past a month.

Harvesting energy from the natural vibration of human walking.

PubMed

Yang, Weiqing; Chen, Jun; Zhu, Guang; Yang, Jin; Bai, Peng; Su, Yuanjie; Jing, Qingsheng; Cao, Xia; Wang, Zhong Lin

2013-12-23

The triboelectric nanogenerator (TENG), a unique technology for harvesting ambient mechanical energy based on the triboelectric effect, has been proven to be a cost-effective, simple, and robust approach for self-powered systems. However, a general challenge is that the output current is usually low. Here, we demonstrated a rationally designed TENG with integrated rhombic gridding, which greatly improved the total current output owing to the structurally multiplied unit cells connected in parallel. With the hybridization of both the contact-separation mode and sliding electrification mode among nanowire arrays and nanopores fabricated onto the surfaces of two contact plates, the newly designed TENG produces an open-circuit voltage up to 428 V, and a short-circuit current of 1.395 mA with the peak power density of 30.7 W/m(2). Relying on the TENG, a self-powered backpack was developed with a vibration-to-electric energy conversion efficiency up to 10.62(±1.19) %. And it was also demonstrated as a direct power source for instantaneously lighting 40 commercial light-emitting diodes by harvesting the vibration energy from natural human walking. The newly designed TENG can be a mobile power source for field engineers, explorers, and disaster-relief workers.

Generating electricity while walking with loads.

PubMed

Rome, Lawrence C; Flynn, Louis; Goldman, Evan M; Yoo, Taeseung D

2005-09-09

We have developed the suspended-load backpack, which converts mechanical energy from the vertical movement of carried loads (weighing 20 to 38 kilograms) to electricity during normal walking [generating up to 7.4 watts, or a 300-fold increase over previous shoe devices (20 milliwatts)]. Unexpectedly, little extra metabolic energy (as compared to that expended carrying a rigid backpack) is required during electricity generation. This is probably due to a compensatory change in gait or loading regime, which reduces the metabolic power required for walking. This electricity generation can help give field scientists, explorers, and disaster-relief workers freedom from the heavy weight of replacement batteries and thereby extend their ability to operate in remote areas.

20--500 watt AMTEC auxiliary electric power system

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ivanenok, J.F. III; Sievers, R.K.

1996-12-31

Numerous design studies have been completed on Alkali Metal Thermal to Electric Converter (AMTEC) power systems for space applications demonstrating their substantial increase in performance. Recently design studies have been initiated to couple AMTEC power conversion with fossil fueled combustion systems. This paper describes the results of a Phase 1 SBIR effort to design an innovative, efficient, reliable, long life AMTEC Auxiliary Electric Power System (AEPS) for remote site applications (20--500 watts). The concept uses high voltage AMTEC cells, each containing 7 to 9 small electrolyte tubes, integrated with a combustor and recuperator. These multi-tube AMTEC cells are low cost,more » reliable, long life static converters. AMTEC technology is ideal for auxiliary electric power supplies that must operate reliably over a broad range of temperatures, fuel sources, power levels, and operational specifications. The simplicity, efficiency (20% systems) and modularity of this technology allow it to fill applications as varied as light-weight backpacks, remote site power supplies, and military base power. Phase 1 demonstrated the feasibility of a 20% system design, and showed that the development needs to focus on identifying long life AMTEC cell components, determining the AMTEC cell and system reliability, and demonstrating that a 20 watt AMTEC system is 3--5 times more efficient than existing systems for the same application.« less

Development of a multimetric index for fish assemblages in a cold tailwater in Tennessee

USGS Publications Warehouse

Ivasauskas, Tomas J.; Bettoli, Phillip William

2014-01-01

Tailwaters downstream of hypolimnetic-release hydropeaking dams exhibit a unique combination of stressors that affects the structure and function of resident fish assemblages. We developed a statistically and biologically defensible multimetric index of fish assemblages for the Caney Fork River below Center Hill Dam, Tennessee. Fish assemblages were sampled at five sites using boat-mounted and backpack electrofishing gear from fall 2009 through summer 2011. A multivariate statistical approach was used to select metrics that best reflected the downstream gradients in abiotic variables. Five metrics derived from boat electrofishing samples and four metrics derived from backpack electrofishing samples were selected for incorporation into the index based on their high correlation with environmental data. The nine metrics demonstrated predictable patterns of increase or decrease with increasing distance downstream of the dam. The multimetric index generally exhibited a pattern of increasing scores with increasing distance from the dam, indicating a downstream recovery gradient in fish assemblage composition. The index can be used to monitor anticipated changes in the fish communities of the Caney Fork River when repairs to Center Hill Dam are completed later this decade, resulting in altered dam operations.

Design of Composite Structures Using Knowledge-Based and Case Based Reasoning

NASA Technical Reports Server (NTRS)

Lambright, Jonathan Paul

1996-01-01

A method of using knowledge based and case based reasoning to assist designers during conceptual design tasks of composite structures was proposed. The cooperative use of heuristics, procedural knowledge, and previous similar design cases suggests a potential reduction in design cycle time and ultimately product lead time. The hypothesis of this work is that the design process of composite structures can be improved by using Case-Based Reasoning (CBR) and Knowledge-Based (KB) reasoning in the early design stages. The technique of using knowledge-based and case-based reasoning facilitates the gathering of disparate information into one location that is easily and readily available. The method suggests that the inclusion of downstream life-cycle issues into the conceptual design phase reduces potential of defective, and sub-optimal composite structures. Three industry experts were interviewed extensively. The experts provided design rules, previous design cases, and test problems. A Knowledge Based Reasoning system was developed using the CLIPS (C Language Interpretive Procedural System) environment and a Case Based Reasoning System was developed using the Design Memory Utility For Sharing Experiences (MUSE) xviii environment. A Design Characteristic State (DCS) was used to document the design specifications, constraints, and problem areas using attribute-value pair relationships. The DCS provided consistent design information between the knowledge base and case base. Results indicated that the use of knowledge based and case based reasoning provided a robust design environment for composite structures. The knowledge base provided design guidance from well defined rules and procedural knowledge. The case base provided suggestions on design and manufacturing techniques based on previous similar designs and warnings of potential problems and pitfalls. The case base complemented the knowledge base and extended the problem solving capability beyond the existence of limited well defined rules. The findings indicated that the technique is most effective when used as a design aid and not as a tool to totally automate the composites design process. Other areas of application and implications for future research are discussed.

Reusing Design Knowledge Based on Design Cases and Knowledge Map

ERIC Educational Resources Information Center

Yang, Cheng; Liu, Zheng; Wang, Haobai; Shen, Jiaoqi

2013-01-01

Design knowledge was reused for innovative design work to support designers with product design knowledge and help designers who lack rich experiences to improve their design capacity and efficiency. First, based on the ontological model of product design knowledge constructed by taxonomy, implicit and explicit knowledge was extracted from some…

Microcapitalism and the mega-corporation.

PubMed

Dunn, Debra; Yamashita, Keith

2003-08-01

More than 100 miles from Bangalore, India, there's a rural area called Kuppam where one in three citizens is illiterate, more than half of the households have no electricity, and there's a high rate of AIDS. It's exactly this challenging atmosphere that prompted Hewlett-Packard to choose Kuppam as one of its first "i-communities" initiatives. Through the program, HP creates public-private partnerships to accelerate economic development through the application of technology while simultaneously opening new markets and developing new products and services. HP brings to these initiatives the management disciplines of a successful technology business. For example, it unearths customer needs using an iterative cycle that involves prototyping products and services and then closely observing residents' experiences with them. It fields a diversely talented team that brings many skills to the initiative, including deep technical ability, management acumen, and market knowledge. It takes a systems approach, simultaneously examining all the elements that must come together to create a working solution to a given problem. It establishes a "leading platform" on which other players--comapnies, nonprofits, and government agencies--can build technologies and applications. Practices like these help ensure that HP's investment yields real, sustainable results for the community in question. But HP also sees returns to its own business. In Kuppam, the company is discovering the need for (and developing) new products like a solar-powered digital camera, with printer, that fits in a backpack. By engaging the community and its leaders and working with them to design valuable new tools and capabilities, HP is gaining the knowledge it needs to be a stronger competitor in other developing regions.

Ultrasonic ranging and data telemetry system

DOEpatents

Brashear, Hugh R.; Blair, Michael S.; Phelps, James E.; Bauer, Martin L.; Nowlin, Charles H.

1990-01-01

An ultrasonic ranging and data telemetry system determines a surveyor's position and automatically links it with other simultaneously taken survey data. An ultrasonic and radio frequency (rf) transmitter are carried by the surveyor in a backpack. The surveyor's position is determined by calculations that use the measured transmission times of an airborne ultrasonic pulse transmitted from the backpack to two or more prepositioned ultrasonic transceivers. Once a second, rf communications are used both to synchronize the ultrasonic pulse transmission-time measurements and to transmit other simultaneously taken survey data. The rf communications are interpreted by a portable receiver and microcomputer which are brought to the property site. A video display attached to the computer provides real-time visual monitoring of the survey progress and site coverage.

Evaluation of Expedient Decontamination Options with Activated Peroxide-based Liquid Sporicides

DTIC Science & Technology

2013-02-05

H2O2 (6% immediately post mixing) was verified by potassium permanganate titration (see Appendix B, DTRL MOP #3177) and then monitored throughout testing...H2O2 Concentration in AHP The concentration of H2O2 in the AHP solution was verified by analyzing with the potassium permanganate (KMnO4) titration...Concentration of H2O2 in the working decontamination solution was measured via permanganate titration in 24 samples of AHP taken from the backpack sprayer

A nonventing cooling system for space environment extravehicular activity, using radiation and regenerable thermal storage

NASA Technical Reports Server (NTRS)

Bayes, Stephen A.; Trevino, Luis A.; Dinsmore, Craig E.

1988-01-01

This paper outlines the selection, design, and testing of a prototype nonventing regenerable astronaut cooling system for extravehicular activity space suit applications, for mission durations of four hours or greater. The selected system consists of the following key elements: a radiator assembly which serves as the exterior shell of the portable life support subsystem backpack; a layer of phase change thermal storage material, n-hexadecane paraffin, which acts as a regenerable thermal capacitor; a thermoelectric heat pump; and an automatic temperature control system. The capability for regeneration of thermal storage capacity with and without the aid of electric power is provided.

Comparison of electrofishing techniques to detect larval lampreys in wadeable streams in the Pacific Northwest

USGS Publications Warehouse

Dunham, Jason B.; Chelgren, Nathan D.; Heck, Michael P.; Clark, Steven M.

2013-01-01

We evaluated the probability of detecting larval lampreys using different methods of backpack electrofishing in wadeable streams in the U.S. Pacific Northwest. Our primary objective was to compare capture of lampreys using electrofishing with standard settings for salmon and trout to settings specifically adapted for capture of lampreys. Field work consisted of removal sampling by means of backpack electrofishing in 19 sites in streams representing a broad range of conditions in the region. Captures of lampreys at these sites were analyzed with a modified removal-sampling model and Bayesian estimation to measure the relative odds of capture using the lamprey-specific settings compared with the standard salmonid settings. We found that the odds of capture were 2.66 (95% credible interval, 0.87–78.18) times greater for the lamprey-specific settings relative to standard salmonid settings. When estimates of capture probability were applied to estimating the probabilities of detection, we found high (>0.80) detectability when the actual number of lampreys in a site was greater than 10 individuals and effort was at least two passes of electrofishing, regardless of the settings used. Further work is needed to evaluate key assumptions in our approach, including the evaluation of individual-specific capture probabilities and population closure. For now our results suggest comparable results are possible for detection of lampreys by using backpack electrofishing with salmonid- or lamprey-specific settings.

Giardia: General Information

MedlinePlus

... with giardiasis People who drink water or use ice made from places where Giardia may live (for example, untreated or improperly treated water from lakes, streams, or wells) Backpackers, hikers, and campers who ...

Application of backpack Lidar to geological cross-section measurement

NASA Astrophysics Data System (ADS)

Lin, Jingyu; Wang, Ran; Xiao, Zhouxuan; Li, Lu; Yao, Weihua; Han, Wei; Zhao, Baolin

2017-11-01

As the traditional geological cross section measurement, the artificial traverse method was recently substituted by using point coordinates data. However, it is still the crux of the matter that how to acquire the high-precision point coordinates data quickly and economically. Thereby, the backpack Lidar is presented on the premise of the principle of using point coordinates in this issue. Undoubtedly, Lidar technique, one of booming and international active remote sensing techniques, is a powerful tool in obtaining precise topographic information, high-precision 3-D coordinates and building a real 3-D model. With field practice and date processing indoors, it is essentially accomplished that geological sections maps could be generated simply, accurately and automatically in the support of relevant software such as ArcGIS and LiDAR360.

Manned maneuvering unit: User's guide

NASA Technical Reports Server (NTRS)

Lenda, J. A.

1978-01-01

The space shuttle will provide an opportunity to extend and enhance the crew's inherent capabilities in orbit by allowing them to operate effectively outside of their spacecraft by means of extravehicular activity. For this role, the shuttle crew will have a new, easier to don and operate space suit with integral life support system, and a self-contained propulsive backpack. The backpack, called the manned maneuvering unit, will allow the crew to operate beyond the confines of the Shuttle cargo bay and fly to any part of their own spacecraft or to nearby free-flying payloads or structure. This independent mobility will be used to support a wide variety of activities including free-space transfer of cargo and personnel, inspection and monitoring of orbital operations, and construction and assembly of large structures in orbit.

A Segway RMP-based robotic transport system

NASA Astrophysics Data System (ADS)

Nguyen, Hoa G.; Kogut, Greg; Barua, Ripan; Burmeister, Aaron; Pezeshkian, Narek; Powell, Darren; Farrington, Nathan; Wimmer, Matt; Cicchetto, Brett; Heng, Chana; Ramirez, Velia

2004-12-01

In the area of logistics, there currently is a capability gap between the one-ton Army robotic Multifunction Utility/Logistics and Equipment (MULE) vehicle and a soldier"s backpack. The Unmanned Systems Branch at Space and Naval Warfare Systems Center (SPAWAR Systems Center, or SSC), San Diego, with the assistance of a group of interns from nearby High Tech High School, has demonstrated enabling technologies for a solution that fills this gap. A small robotic transport system has been developed based on the Segway Robotic Mobility Platform (RMP). We have demonstrated teleoperated control of this robotic transport system, and conducted two demonstrations of autonomous behaviors. Both demonstrations involved a robotic transporter following a human leader. In the first demonstration, the transporter used a vision system running a continuously adaptive mean-shift filter to track and follow a human. In the second demonstration, the separation between leader and follower was significantly increased using Global Positioning System (GPS) information. The track of the human leader, with a GPS unit in his backpack, was sent wirelessly to the transporter, also equipped with a GPS unit. The robotic transporter traced the path of the human leader by following these GPS breadcrumbs. We have additionally demonstrated a robotic medical patient transport capability by using the Segway RMP to power a mock-up of the Life Support for Trauma and Transport (LSTAT) patient care platform, on a standard NATO litter carrier. This paper describes the development of our demonstration robotic transport system and the various experiments conducted.

Backpack Safety (For Parents)

MedlinePlus

... backaches because they're lugging around their entire locker's worth of books, school supplies, and personal items ... rests with kids: Encourage kids to use their locker or desk often throughout the day instead of ...

A long-duration (118-day) backpacking trip (2669 km) normalizes lipids without medication: a case study.

PubMed

Devoe, Dale; Israel, Richard Gay; Lipsey, Tiffany; Voyles, Wyatt

2009-01-01

To evaluate the effects of a long-distance backpacking trip on body composition, weight, blood lipids, and lipoproteins. Single-subject (male, aged 49 years) study of an experienced backpacker who hiked 118 days on the Appalachian Trail. Outcome measures that were assessed pre-hike and post-hike included body fat (%) by hydrostatic weighing and skinfold assessment, height and weight, body mass index (BMI), circumference measurements (umbilicus, anterior suprailiac, maximum hip, greater trochanter, minimum waist, umbilicus/anterior suprailiac ratio), and blood pressure (systolic and diastolic at rest and peak). Dietary analyses (total kilocalories, protein, carbohydrate, fat, cholesterol, saturated fat, monounsaturated fat, polyunsaturated fat, dietary fiber) were conducted pre-hike, on days 54 through 56, and on days 98 through 100. Blood lipids and lipoproteins (triglycerides, high-density lipoprotein, low-density lipoprotein) were measured pre-hike, on day 89, and post-hike. Pre-post differences showed decreases in body weight, from 85.3 kg to 73.9 kg (-11.4 [-13.4%]); percent body fat, hydrostatic weighing, from 25.18 to 14.31 (-10.87 [-43.2%]); percent body fat, skinfolds (7-site), from 23.79 to 11.61 (12.18 [-51.2%]); and BMI, from 29.37 to 25.46 (-3.91 [-13.3%]). Pre-post differences in blood lipid changes over the course of 118 days were as follows: triglycerides (mg x dL(-1)) fell from 319 to 79 (-240 [-75%]); total cholesterol (mg x dL(-1)) fell from 276 to 196 (-80 [-29%]); high-density lipoprotein (HDL) (mg x dL(-1)) rose from 46 to 63 (+17 [+37%]); low-density lipoprotein (LDL) (mg.dL(-1)) fell from 167 to 118 (-49 [-29%]); LDL/HDL ratio fell from 3.63 to 1.87 (-1.76 [-48%]); and total cholesterol/HDL ratio fell from 6.00 to 3.11 (-2.89 [-48%]). The physical activity and diet associated with an extended backpacking adventure can considerably reduce and clinically normalize blood lipids and lipoproteins without medication and can very positively affect body composition and weight.

SILTECH OP-40

EPA Pesticide Factsheets

Technical product bulletin: this surface collecting agent used in oil spill cleanups should be sprayed on water around the perimeter of an oil slick using a pressurized backpack sprayer or aerial applicator, to aid in situ burning.

History of Chiropractic Care

MedlinePlus

... Shareable Graphics Back Pain Prevention Headaches and Chiropractic Neck Pain and Chiropractic Posture Backpack Safety Spinal Health Winter ... new science and healing art. Among his early students were Palmer’s son, Bartlett Joshua (BJ), as well ...

Locomotion control of hybrid cockroach robots

PubMed Central

Sanchez, Carlos J.; Chiu, Chen-Wei; Zhou, Yan; González, Jorge M.; Vinson, S. Bradleigh; Liang, Hong

2015-01-01

Natural systems retain significant advantages over engineered systems in many aspects, including size and versatility. In this research, we develop a hybrid robotic system using American (Periplaneta americana) and discoid (Blaberus discoidalis) cockroaches that uses the natural locomotion and robustness of the insect. A tethered control system was firstly characterized using American cockroaches, wherein implanted electrodes were used to apply an electrical stimulus to the prothoracic ganglia. Using this approach, larger discoid cockroaches were engineered into a remotely controlled hybrid robotic system. Locomotion control was achieved through electrical stimulation of the prothoracic ganglia, via a remotely operated backpack system and implanted electrodes. The backpack consisted of a microcontroller with integrated transceiver protocol, and a rechargeable battery. The hybrid discoid roach was able to walk, and turn in response to an electrical stimulus to its nervous system with high repeatability of 60%. PMID:25740855

[Materials for the paediatric resuscitation trolley or backpack: Expert recommendations].

PubMed

López-Herce Cid, Jesús; Rodríguez Núñez, Antonio; Carrillo Álvarez, Ángel; Zeballos Sarrato, Gonzalo; Martínez Fernández-Llamazares, Cecilia; Calvo Macías, Custodio

2018-03-01

Cardio-respiratory arrest (CPA) is infrequent in children, but it can occur in any place and at any time. This fact means that every health care facility must always have the staff and material ready to resuscitate a child. These recommendations are the consensus of experts of the Spanish Paediatric and Neonatal Resuscitation Group on the material and medication for paediatric and neonatal resuscitation and their distribution and use. CPR trolleys and backpacks must include the essential material to quickly and efficiently perform a paediatric CPR. At least one CPR trolley must be available in every Primary Care facility, Paediatric Intensive Care Unit, Emergency Department, and Pre-hospital Emergency Areas, as well as in paediatric wards, paediatric ambulatory areas, and radiology suites. This trolley must be easily accessible and exclusively include the essential items to perform a CPR and to assist children (from newborns to adolescents) who present with a life-threatening event. Such material must be familiar to all healthcare staff and also include the needed spare parts, as well as enough drug doses. It must also be re-checked periodically. The standardisation and unification of the material and medication of paediatric CPR carts, trolleys, and backpacks, as well as the training of the personnel in their use are an essential part of the paediatric CPR. Copyright © 2017 Asociación Española de Pediatría. Publicado por Elsevier España, S.L.U. All rights reserved.

Comparison of Low Cost Photogrammetric Survey with Tls and Leica Pegasus Backpack 3d Modelss

NASA Astrophysics Data System (ADS)

Masiero, A.; Fissore, F.; Guarnieri, A.; Piragnolo, M.; Vettore, A.

2017-11-01

This paper considers Leica backpack and photogrammetric surveys of a mediaeval bastion in Padua, Italy. Furhtermore, terrestrial laser scanning (TLS) survey is considered in order to provide a state of the art reconstruction of the bastion. Despite control points are typically used to avoid deformations in photogrammetric surveys and ensure correct scaling of the reconstruction, in this paper a different approach is considered: this work is part of a project aiming at the development of a system exploiting ultra-wide band (UWB) devices to provide correct scaling of the reconstruction. In particular, low cost Pozyx UWB devices are used to estimate camera positions during image acquisitions. Then, in order to obtain a metric reconstruction, scale factor in the photogrammetric survey is estimated by comparing camera positions obtained from UWB measurements with those obtained from photogrammetric reconstruction. Compared with the TLS survey, the considered photogrammetric model of the bastion results in a RMSE of 21.9cm, average error 13.4cm, and standard deviation 13.5cm. Excluding the final part of the bastion left wing, where the presence of several poles make reconstruction more difficult, (RMSE) fitting error is 17.3cm, average error 11.5cm, and standard deviation 9.5cm. Instead, comparison of Leica backpack and TLS surveys leads to an average error of 4.7cm and standard deviation 0.6cm (4.2cm and 0.3cm, respectively, by excluding the final part of the left wing).

Micro Electron MicroProbe and Sample Analyzer

NASA Technical Reports Server (NTRS)

Manohara, Harish; Bearman, Gregory; Douglas, Susanne; Bronikowski, Michael; Urgiles, Eduardo; Kowalczyk, Robert; Bryson, Charles

2009-01-01

A proposed, low-power, backpack-sized instrument, denoted the micro electron microprobe and sample analyzer (MEMSA), would serve as a means of rapidly performing high-resolution microscopy and energy-dispersive x-ray spectroscopy (EDX) of soil, dust, and rock particles in the field. The MEMSA would be similar to an environmental scanning electron microscope (ESEM) but would be much smaller and designed specifically for field use in studying effects of geological alteration at the micrometer scale. Like an ESEM, the MEMSA could be used to examine uncoated, electrically nonconductive specimens. In addition to the difference in size, other significant differences between the MEMSA and an ESEM lie in the mode of scanning and the nature of the electron source.

The elements of design knowledge capture

NASA Technical Reports Server (NTRS)

Freeman, Michael S.

1988-01-01

This paper will present the basic constituents of a design knowledge capture effort. This will include a discussion of the types of knowledge to be captured in such an effort and the difference between design knowledge capture and more traditional knowledge base construction. These differences include both knowledge base structure and knowledge acquisition approach. The motivation for establishing a design knowledge capture effort as an integral part of major NASA programs will be outlined, along with the current NASA position on that subject. Finally the approach taken in design knowledge capture for Space Station will be contrasted with that used in the HSTDEK project.

Study of Design Knowledge Capture (DKC) schemes implemented in magnetic bearing applications

NASA Technical Reports Server (NTRS)

1990-01-01

A design knowledge capture (DKC) scheme was implemented using frame-based techniques. The objective of such a system is to capture not only the knowledge which describes a design, but also that which explains how the design decisions were reached. These knowledge types were labelled definitive and explanatory, respectively. Examination of the design process helped determine what knowledge to retain and at what stage that knowledge is used. A discussion of frames resulted in the recognition of their value to knowledge representation and organization. The FORMS frame system was used as a basis for further development, and for examples using magnetic bearing design. The specific contributions made by this research include: determination that frame-based systems provide a useful methodology for management and application of design knowledge; definition of specific user interface requirements, (this consists of a window-based browser); specification of syntax for DKC commands; and demonstration of the feasibility of DKC by applications to existing designs. It was determined that design knowledge capture could become an extremely valuable engineering tool for complicated, long-life systems, but that further work was needed, particularly the development of a graphic, window-based interface.

Spectrum of Imported Infectious Diseases: A Comparative Prevalence Study of 16,817 German Travelers and 977 Immigrants from the Tropics and Subtropics

PubMed Central

Herbinger, Karl-Heinz; Alberer, Martin; Berens-Riha, Nicole; Schunk, Mirjam; Bretzel, Gisela; von Sonnenburg, Frank; Nothdurft, Hans Dieter; Löscher, Thomas; Beissner, Marcus

2016-01-01

The aim of this study was to assess the spectrum of imported infectious diseases (IDs) among patients consulting the University of Munich, Germany, between 1999 and 2014 after being in the sub-/tropics. The analysis investigated complete data sets of 16,817 diseased German travelers (2,318 business travelers, 4,029 all-inclusive travelers, and 10,470 backpackers) returning from Latin America (3,225), Africa (4,865), or Asia (8,727), and 977 diseased immigrants, originating from the same regions (112, 654 and 211 respectively). The most frequent symptoms assessed were diarrhea (38%), fever (29%), and skin disorder (22%). The most frequent IDs detected were intestinal infections with species of Blastocystis (900), Giardia (730), Campylobacter (556), Shigella (209), and Salmonella (183). Also frequently observed were cutaneous larva migrans (379), dengue (257), and malaria (160). The number of IDs with significantly elevated proportions was higher among backpackers (18) and immigrants (17), especially among those from Africa (18) and Asia (17), whereas it was lower for business travelers (5), all-inclusive travelers (1), and those from Latin America (5). This study demonstrates a large spectrum of imported IDs among returning German travelers and immigrants, which varies greatly based not only on travel destination and origin of immigrants, but also on type of travel. PMID:26903611

Spectrum of Imported Infectious Diseases: A Comparative Prevalence Study of 16,817 German Travelers and 977 Immigrants from the Tropics and Subtropics.

PubMed

Herbinger, Karl-Heinz; Alberer, Martin; Berens-Riha, Nicole; Schunk, Mirjam; Bretzel, Gisela; von Sonnenburg, Frank; Nothdurft, Hans Dieter; Löscher, Thomas; Beissner, Marcus

2016-04-01

The aim of this study was to assess the spectrum of imported infectious diseases (IDs) among patients consulting the University of Munich, Germany, between 1999 and 2014 after being in the sub-/tropics. The analysis investigated complete data sets of 16,817 diseased German travelers (2,318 business travelers, 4,029 all-inclusive travelers, and 10,470 backpackers) returning from Latin America (3,225), Africa (4,865), or Asia (8,727), and 977 diseased immigrants, originating from the same regions (112, 654 and 211 respectively). The most frequent symptoms assessed were diarrhea (38%), fever (29%), and skin disorder (22%). The most frequent IDs detected were intestinal infections with species of Blastocystis(900),Giardia(730),Campylobacter(556),Shigella(209), and Salmonella(183). Also frequently observed were cutaneous larva migrans (379), dengue (257), and malaria (160). The number of IDs with significantly elevated proportions was higher among backpackers (18) and immigrants (17), especially among those from Africa (18) and Asia (17), whereas it was lower for business travelers (5), all-inclusive travelers (1), and those from Latin America (5). This study demonstrates a large spectrum of imported IDs among returning German travelers and immigrants, which varies greatly based not only on travel destination and origin of immigrants, but also on type of travel. © The American Society of Tropical Medicine and Hygiene.

The research on construction and application of machining process knowledge base

NASA Astrophysics Data System (ADS)

Zhao, Tan; Qiao, Lihong; Qie, Yifan; Guo, Kai

2018-03-01

In order to realize the application of knowledge in machining process design, from the perspective of knowledge in the application of computer aided process planning(CAPP), a hierarchical structure of knowledge classification is established according to the characteristics of mechanical engineering field. The expression of machining process knowledge is structured by means of production rules and the object-oriented methods. Three kinds of knowledge base models are constructed according to the representation of machining process knowledge. In this paper, the definition and classification of machining process knowledge, knowledge model, and the application flow of the process design based on the knowledge base are given, and the main steps of the design decision of the machine tool are carried out as an application by using the knowledge base.

Outdoors America: recreational opportunites on public lands

USGS Publications Warehouse

,

1992-01-01

What comes to your mind when you think of outdoor recreation? Boating? Camping? Hiking or backpacking? Horse-back riding? Hunting or fishing? Chances are, if you can name an outdoor activity, you can do it on public lands.

Educate a Hang Glider Pilot, a Backpacker.

ERIC Educational Resources Information Center

Kaufmann, Robert B.

1983-01-01

Outdoor education should educate people in, about, and for the out-of-doors, regardless of age or activity setting, and must document the effects technology has had on leisure as well as on outdoor education. (Author/MH)

Locomotion control of hybrid cockroach robots.

PubMed

Sanchez, Carlos J; Chiu, Chen-Wei; Zhou, Yan; González, Jorge M; Vinson, S Bradleigh; Liang, Hong

2015-04-06

Natural systems retain significant advantages over engineered systems in many aspects, including size and versatility. In this research, we develop a hybrid robotic system using American (Periplaneta americana) and discoid (Blaberus discoidalis) cockroaches that uses the natural locomotion and robustness of the insect. A tethered control system was firstly characterized using American cockroaches, wherein implanted electrodes were used to apply an electrical stimulus to the prothoracic ganglia. Using this approach, larger discoid cockroaches were engineered into a remotely controlled hybrid robotic system. Locomotion control was achieved through electrical stimulation of the prothoracic ganglia, via a remotely operated backpack system and implanted electrodes. The backpack consisted of a microcontroller with integrated transceiver protocol, and a rechargeable battery. The hybrid discoid roach was able to walk, and turn in response to an electrical stimulus to its nervous system with high repeatability of 60%. © 2015 The Author(s) Published by the Royal Society. All rights reserved.

Spray Nozzles, Pressures, Additives and Stirring Time on Viability and Pathogenicity of Entomopathogenic Nematodes (Nematoda: Rhabditida) for Greenhouses

PubMed Central

Moreira, Grazielle Furtado; Batista, Elder Simões de Paula; Campos, Henrique Borges Neves; Lemos, Raphael Emilio; Ferreira, Marcelo da Costa

2013-01-01

The objective of this study was to evaluate different strategies for the application of entomopathogenic nematodes (EPN). Three different models of spray nozzles with air induction (AI 11003, TTI 11003 and AD-IA 11004), three spray pressures (207, 413 and 720 kPa), four different additives for tank mixtures (cane molasses, mineral oil, vegetable oil and glycerin) and the influence of tank mixture stirring time were all evaluated for their effect on EPN (Steinernema feltiae) viability and pathogenicity. The different nozzles, at pressures of up to 620 kPa, were found to be compatible with S. feltiae. Vegetable oil, mineral oil and molasses were found to be compatible adjuvants for S. feltiae, and stirring in a motorized backpack sprayer for 30 minutes did not impact the viability or pathogenicity of this nematode. Appropriate techniques for the application of nematodes with backpack sprayers are discussed. PMID:23755280

Spray nozzles, pressures, additives and stirring time on viability and pathogenicity of entomopathogenic nematodes (nematoda: rhabditida) for greenhouses.

PubMed

Moreira, Grazielle Furtado; Batista, Elder Simões de Paula; Campos, Henrique Borges Neves; Lemos, Raphael Emilio; Ferreira, Marcelo da Costa

2013-01-01

The objective of this study was to evaluate different strategies for the application of entomopathogenic nematodes (EPN). Three different models of spray nozzles with air induction (AI 11003, TTI 11003 and AD-IA 11004), three spray pressures (207, 413 and 720 kPa), four different additives for tank mixtures (cane molasses, mineral oil, vegetable oil and glycerin) and the influence of tank mixture stirring time were all evaluated for their effect on EPN (Steinernema feltiae) viability and pathogenicity. The different nozzles, at pressures of up to 620 kPa, were found to be compatible with S. feltiae. Vegetable oil, mineral oil and molasses were found to be compatible adjuvants for S. feltiae, and stirring in a motorized backpack sprayer for 30 minutes did not impact the viability or pathogenicity of this nematode. Appropriate techniques for the application of nematodes with backpack sprayers are discussed.

Load-carriage distance run and push-ups tests: no body mass bias and occupationally relevant.

PubMed

Vanderburgh, Paul M; Mickley, Nicholas S; Anloague, Philip A

2011-09-01

Recent research has demonstrated body mass (M) bias in military physical fitness tests favoring lighter, not just leaner, service members. Mathematical modeling predicts that a distance run carrying a backpack of 30 lbs would eliminate M-bias. The purpose of this study was to empirically test this prediction for the U.S. Army push-ups and 2-mile run tests. Two tests were performed for both events for each of 56 university Reserve Officer Training Corps male cadets: with (loaded) and without backpack (unloaded). Results indicated significant M-bias in the unloaded and no M-bias in the loaded condition for both events. Allometrically scaled scores for both events were worse in the loaded vs. unloaded conditions, supporting a hypothesis not previously tested. The loaded push-ups and 2-mile run appear to remove M-bias and are probably more occupationally relevant as military personnel are often expected to carry external loads.

A Comparison of Functional Models for Use in the Function-Failure Design Method

NASA Technical Reports Server (NTRS)

Stock, Michael E.; Stone, Robert B.; Tumer, Irem Y.

2006-01-01

When failure analysis and prevention, guided by historical design knowledge, are coupled with product design at its conception, shorter design cycles are possible. By decreasing the design time of a product in this manner, design costs are reduced and the product will better suit the customer s needs. Prior work indicates that similar failure modes occur with products (or components) with similar functionality. To capitalize on this finding, a knowledge base of historical failure information linked to functionality is assembled for use by designers. One possible use for this knowledge base is within the Elemental Function-Failure Design Method (EFDM). This design methodology and failure analysis tool begins at conceptual design and keeps the designer cognizant of failures that are likely to occur based on the product s functionality. The EFDM offers potential improvement over current failure analysis methods, such as FMEA, FMECA, and Fault Tree Analysis, because it can be implemented hand in hand with other conceptual design steps and carried throughout a product s design cycle. These other failure analysis methods can only truly be effective after a physical design has been completed. The EFDM however is only as good as the knowledge base that it draws from, and therefore it is of utmost importance to develop a knowledge base that will be suitable for use across a wide spectrum of products. One fundamental question that arises in using the EFDM is: At what level of detail should functional descriptions of components be encoded? This paper explores two approaches to populating a knowledge base with actual failure occurrence information from Bell 206 helicopters. Functional models expressed at various levels of detail are investigated to determine the necessary detail for an applicable knowledge base that can be used by designers in both new designs as well as redesigns. High level and more detailed functional descriptions are derived for each failed component based on NTSB accident reports. To best record this data, standardized functional and failure mode vocabularies are used. Two separate function-failure knowledge bases are then created aid compared. Results indicate that encoding failure data using more detailed functional models allows for a more robust knowledge base. Interestingly however, when applying the EFDM, high level descriptions continue to produce useful results when using the knowledge base generated from the detailed functional models.

Advances in flexible optrode hardware for use in cybernetic insects

NASA Astrophysics Data System (ADS)

Register, Joseph; Callahan, Dennis M.; Segura, Carlos; LeBlanc, John; Lissandrello, Charles; Kumar, Parshant; Salthouse, Christopher; Wheeler, Jesse

2017-08-01

Optogenetic manipulation is widely used to selectively excite and silence neurons in laboratory experiments. Recent efforts to miniaturize the components of optogenetic systems have enabled experiments on freely moving animals, but further miniaturization is required for freely flying insects. In particular, miniaturization of high channel-count optical waveguides are needed for high-resolution interfaces. Thin flexible waveguide arrays are needed to bend light around tight turns to access small anatomical targets. We present the design of lightweight miniaturized optogentic hardware and supporting electronics for the untethered steering of dragonfly flight. The system is designed to enable autonomous flight and includes processing, guidance sensors, solar power, and light stimulators. The system will weigh less than 200mg and be worn by the dragonfly as a backpack. The flexible implant has been designed to provide stimuli around nerves through micron scale apertures of adjacent neural tissue without the use of heavy hardware. We address the challenges of lightweight optogenetics and the development of high contrast polymer waveguides for this purpose.

Biomechanical analysis of the single‐leg decline squat

PubMed Central

Zwerver, J; Bredeweg, S W; Hof, A L

2007-01-01

Background The single‐leg squat on a 25° decline board has been described as a clinical assessment tool and as a rehabilitation exercise for patients with patellar tendinopathy. Several assumptions have been made about its working mechanism on patellar load and patellofemoral forces, but these are not substantiated by biomechanical evaluations. Aim To investigate knee moment and patellofemoral contact force as a function of decline angle in the single‐leg squat. Methods Five subjects performed single‐leg eccentric squats at decline angles of 0°, 5°, 10°, 15°, 20° and 25° (with/without a backpack of 10 kg), and 30° on a board that was placed over a forceplate. Kinematic and forceplate data were recorded by the Optotrak system. Joint moments of ankle, knee and hip were calculated by two‐dimensional inverse dynamics. Results Knee moment increased by 40% at decline angles of 15° and higher, whereas hip and ankle moment decreased. Maximum knee and ankle angles increased with steeper decline. With a 10 kg backpack at 25° decline, the knee moment was 23% higher than unloaded. Both patellar tendon and patellofemoral forces increased with higher decline angles, but beyond 60°, the patellofemoral force rose steeper than the tendon force. Conclusions All single‐leg squats at decline angles >15° result in 40% increase in maximum patellar tendon force. In knee flexions >60°, patellofemoral forces increase more than patellar tendon forces. Higher tendon load can be achieved by the use of a backpack with extra weight. PMID:17224441

Neuromuscular Impairment Following Backpack Load Carriage

PubMed Central

Blacker, Sam D.; Fallowfield, Joanne L.; Bilzon, James L.J.; Willems, Mark E.T.

Load Carriage using backpacks is an occupational task and can be a recreational pursuit. The aim of this study was to investigate the mechanisms responsible for changes in neuromuscular function of the m. quadriceps femoris following load carriage. The physiological responses of 10 male participants to voluntary and electrically stimulated isometric contractions were measured before and immediately after two hours of treadmill walking at 6.5 km•h −1 during level walking with no load [LW], and level walking with load carriage (25 kg backpack) [LC]. Maximal voluntary contraction force decreased by 15 ± 11 % following LC (p=0.006), with no change following LW (p=0.292). Voluntary activation decreased after LW and LC (p=0.033) with no difference between conditions (p=0.405). Doublet contraction time decreased after both LW and LC (p=0.002), with no difference between conditions (p=0.232). There were no other changes in electrically invoked doublet parameters in either condition. The 20:50 Hz ratio did not change following LW (p=0.864) but decreased from 0.88 ± 0.04 to 0.84 ± 0.04 after LC (p=0.011) indicating reduced Ca2+ release from the sarcoplasmic reticulum during excitation contraction coupling. In conclusion, two hours of load carriage carrying a 25 kg back pack caused neuromuscular impairment through a decrease in voluntary activation (i.e. central drive) and fatigue or damage to the peripheral muscle, including impairment of the excitation contraction coupling process. This may reduce physical performance and increase the risk of musculoskeletal injury. PMID:24146709

Development of Ultra Low Temperature, Impact Resistant Lithium Battery for the Mars Microprobe

NASA Technical Reports Server (NTRS)

Frank, H.; Deligiannis, F.; Davies, E.; Ratnakumar, Bugga V.; Surampudi, S.; Russel, P. G.; Reddy, T. B.

1998-01-01

The requirements of the power source for the Mars Microprobe, to be backpacked on the Mars 98 Spacecraft, are fairly demanding, with survivability to a shock of the order of 80,000 g combined with an operational requirement at -80 C. Development of a suitable power system, based on primary lithium-thionyl chloride is underway for the last eighteen months, together with Yardney Technical Products Inc., Pawcatuck, CT. The battery consists of 4 cells of 2 Ah capacity at 25 C, of which at least 25 % would be available at -80 C, at a moderate rate of C/20. Each probe contains two batteries and two such probes will be deployed. The selected cell is designed around an approximate 1/2 "D" cells, with flat plate electrodes. Significant improvements to the conventional Li-SOCl2 cell include: (a) use of tetrachlorogallate salt instead of aluminate for improved low temperature performance and reduced voltage delay, (b) optimization of the salt concentration, and (c) modification of the cell design to develop shock resistance to 80,000 g. We report here results from our several electrical performance tests, mission simulation tests, microcalorimetry and AC impedance studies, and Air gun tests. The cells have successfully gone through mission-enabling survivability and performance tests for the Mars Microprobe penetrator.

A low noise remotely controllable wireless telemetry system for single-unit recording in rats navigating in a vertical maze.

PubMed

Chen, Hsin-Yung; Wu, Jin-Shang; Hyland, Brian; Lu, Xiao-Dong; Chen, Jia Jin Jason

2008-08-01

The use of cables for recording neural activity limits the scope of behavioral tests used in conscious free-moving animals. Particularly, cable attachments make it impossible to record in three-dimensional (3D) mazes where levels are vertically stacked or in enclosed spaces. Such environments are of particular interest in investigations of hippocampal place cells, in which neural activity is correlated with spatial position in the environment. We developed a flexible miniaturized Bluetooth-based wireless data acquisition system. The wireless module included an 8-channel analogue front end, digital controller, and Bluetooth transceiver mounted on a backpack. Our bidirectional wireless design allowed all data channels to be previewed at 1 kHz sample rate, and one channel, selected by remote control, to be sampled at 10 kHz. Extracellular recordings of neuronal activity are highly susceptible to ambient electrical noise due to the high electrode impedance. Through careful design of appropriate shielding and hardware configuration to avoid ground loops, mains power and Bluetooth hopping frequency noise were reduced sufficiently to yield signal quality comparable to those recorded by wired systems. With this system we were able to obtain single-unit recordings of hippocampal place cells in rats running an enclosed vertical maze, over a range of 5 m.

Mobile Agents: A Distributed Voice-Commanded Sensory and Robotic System for Surface EVA Assistance

NASA Technical Reports Server (NTRS)

Clancey, William J.; Sierhuis, Maarten; Alena, Rick; Crawford, Sekou; Dowding, John; Graham, Jeff; Kaskiris, Charis; Tyree, Kim S.; vanHoof, Ronnie

2003-01-01

A model-based, distributed architecture integrates diverse components in a system designed for lunar and planetary surface operations: spacesuit biosensors, cameras, GPS, and a robotic assistant. The system transmits data and assists communication between the extra-vehicular activity (EVA) astronauts, the crew in a local habitat, and a remote mission support team. Software processes ("agents"), implemented in a system called Brahms, run on multiple, mobile platforms, including the spacesuit backpacks, all-terrain vehicles, and robot. These "mobile agents" interpret and transform available data to help people and robotic systems coordinate their actions to make operations more safe and efficient. Different types of agents relate platforms to each other ("proxy agents"), devices to software ("comm agents"), and people to the system ("personal agents"). A state-of-the-art spoken dialogue interface enables people to communicate with their personal agents, supporting a speech-driven navigation and scheduling tool, field observation record, and rover command system. An important aspect of the engineering methodology involves first simulating the entire hardware and software system in Brahms, and then configuring the agents into a runtime system. Design of mobile agent functionality has been based on ethnographic observation of scientists working in Mars analog settings in the High Canadian Arctic on Devon Island and the southeast Utah desert. The Mobile Agents system is developed iteratively in the context of use, with people doing authentic work. This paper provides a brief introduction to the architecture and emphasizes the method of empirical requirements analysis, through which observation, modeling, design, and testing are integrated in simulated EVA operations.

Knowledge-based environment for optical system design

NASA Astrophysics Data System (ADS)

Johnson, R. Barry

1991-01-01

Optical systems are extensively utilized by industry government and military organizations. The conceptual design engineering design fabrication and testing of these systems presently requires significant time typically on the order of 3-5 years. The Knowledge-Based Environment for Optical System Design (KB-OSD) Program has as its principal objectives the development of a methodology and tool(s) that will make a notable reduction in the development time of optical system projects reduce technical risk and overall cost. KB-OSD can be considered as a computer-based optical design associate for system engineers and design engineers. By utilizing artificial intelligence technology coupled with extensive design/evaluation computer application programs and knowledge bases the KB-OSD will provide the user with assistance and guidance to accomplish such activities as (i) develop system level and hardware level requirements from mission requirements (ii) formulate conceptual designs (iii) construct a statement of work for an RFP (iv) develop engineering level designs (v) evaluate an existing design and (vi) explore the sensitivity of a system to changing scenarios. The KB-OSD comprises a variety of computer platforms including a Stardent Titan supercomputer numerous design programs (lens design coating design thermal materials structural atmospherics etc. ) data bases and heuristic knowledge bases. An important element of the KB-OSD Program is the inclusion of the knowledge of individual experts in various areas of optics and optical system engineering. This knowledge is obtained by KB-OSD knowledge engineers performing

Investigations of belukha whales in coastal waters of western and northern Alaska, 1982-1983: marking and tracking of whales in Bristol Bay

DOE Office of Scientific and Technical Information (OSTI.GOV)

Frost, K.J.; Lowry, L.F.; Nelson, R.R.

1983-12-01

A 2-year study was conducted in Bristol Bay, Alaska, to develop and test techniques for marking belukha whales with visual and radio tags. Information was also gathered on belukha distribution and abundance, foods and feeding, and rates and causes of mortality. Two types of radio packages were developed: an OAR backpack designed to be bolted through the dorsal ridge, and a Telonics barnacle tag with an umbrella-stake attachment. Testing of tags and attachments revealed that the more-powerful OAR radio could be received at longer distances and lower antenna heights, and the the umbrella-stake attachment penetrated too deeply for reliable usemore » on belukhas.« less

Enhancing Users' Participation in Business Process Modeling through Ontology-Based Training

NASA Astrophysics Data System (ADS)

Macris, A.; Malamateniou, F.; Vassilacopoulos, G.

Successful business process design requires active participation of users who are familiar with organizational activities and business process modelling concepts. Hence, there is a need to provide users with reusable, flexible, agile and adaptable training material in order to enable them instil their knowledge and expertise in business process design and automation activities. Knowledge reusability is of paramount importance in designing training material on process modelling since it enables users participate actively in process design/redesign activities stimulated by the changing business environment. This paper presents a prototype approach for the design and use of training material that provides significant advantages to both the designer (knowledge - content reusability and semantic web enabling) and the user (semantic search, knowledge navigation and knowledge dissemination). The approach is based on externalizing domain knowledge in the form of ontology-based knowledge networks (i.e. training scenarios serving specific training needs) so that it is made reusable.

ELECTROFISHING EFFORT REQUIREMENTS FOR ASSESSING SPECIES RICHNESS AND BIOTIC INTEGRITY IN WESTERN OREGON STREAMS

EPA Science Inventory

We empirically examined the sampling effort required to adequately represent species richness and proportionate abundance when backpack electrofishing western Oregon streams. When sampling, we separately recorded data for each habitat unit. In data analyses, we repositioned each...

Splicing and local reinforcement of concrete filled FRP tubes.

DOT National Transportation Integrated Search

2014-01-01

This report includes fulfillment of Task 1 of a multi-task contract to further enhance concrete filled FRP tubes, or : the Bridge in a Backpack. Task 1 investigates and develops a feasible solution for splicing the concrete filled FRP : tubes. This w...

Manning's roughness coefficient for buried composite arch bridges.

DOT National Transportation Integrated Search

2014-08-01

This report includes fulfillment of Task 9 of a multi-task contract to further enhance concrete filled FRP tubes, or : the Bridge in a Backpack. Task 9 investigates the interaction of water flow under the bridge with the tubes and : decking and recom...

An Object-Oriented Software Architecture for the Explorer-2 Knowledge Management Environment

PubMed Central

Tarabar, David B.; Greenes, Robert A.; Slosser, Eric T.

1989-01-01

Explorer-2 is a workstation based environment to facilitate knowledge management. It provides consistent access to a broad range of knowledge on the basis of purpose, not type. We have developed a software architecture based on Object-Oriented programming for Explorer-2. We have defined three classes of program objects: Knowledge ViewFrames, Knowledge Resources, and Knowledge Bases. This results in knowledge management at three levels: the screen level, the disk level and the meta-knowledge level. We have applied this design to several knowledge bases, and believe that there is a broad applicability of this design.

Designing for designers: insights into the knowledge users of inclusive design.

PubMed

Dong, Hua; McGinley, Chris; Nickpour, Farnaz; Cifter, Abdusselam Selami

2015-01-01

Over the last twenty years, research on inclusive design has delivered a wealth of publications and initiatives, forming an emerging knowledge base for inclusive design. The inclusive design knowledge base breaks down into two discrete areas - understanding end users from many different perspectives, and understanding the information needs of the knowledge users (e.g. designers) who are involved in promoting and delivering inclusive design solutions. Much research has focused on the end users, but in recent years, understanding the needs and the characteristics of knowledge users has added a new dimension to the research task. This paper focuses on the knowledge users of inclusive design. It discusses the different types of knowledge users and their knowledge needs. The research programmes undertaken by the Inclusive Design Research Group (IDRG) are used to illustrate the process of understanding knowledge needs of designers, developing different types of tools to meet those needs and evaluating their effectiveness. The paper concludes with a discussion on how to adopt an inclusive design research methodology to effectively engage the knowledge users in the development of inclusive design tools. Crown Copyright © 2013. Published by Elsevier Ltd. All rights reserved.

Establishment of a Digital Knowledge Conversion Architecture Design Learning with High User Acceptance

ERIC Educational Resources Information Center

Wu, Yun-Wu; Weng, Apollo; Weng, Kuo-Hua

2017-01-01

The purpose of this study is to design a knowledge conversion and management digital learning system for architecture design learning, helping students to share, extract, use and create their design knowledge through web-based interactive activities based on socialization, internalization, combination and externalization process in addition to…

Vertical Profile of Aerosol Properties at Pico Mountain, Azores

NASA Astrophysics Data System (ADS)

Wright, K.; Mazzoleni, C.; Mazzoleni, L. R.; Dzepina, K.; Hueber, J.; China, S.; Sharma, N.

2013-12-01

Pico Mountain (2325m asl) is a dormant volcano in the archipelago of the Azores1500 km west of Lisbon, Portugal in the North Atlantic. It differs from typical mountain ranges such as the Alps or the Rockies, which are large and present a complex orography. Pico Mountain has a simple cone-like structure with only one main peak and is thousands of kilometers away from any other significant mountain range. In summer months, it is typical for air masses to move around the mountain rather than traveling up its face. This implies that often the peak of the mountain lies above the marine boundary layer in the free troposphere, while the lower part of the mountain is affected by marine clouds and marine air-masses. An atmospheric monitoring station, the Pico Mountain Observatory was established in 2001 in the summit caldera of the volcano at 2225m above sea level. The observatory is far from large populations or pollution sources, which makes the station ideal to study atmospheric gases and aerosols transported over long-ranges in the free troposphere. The station is reachable only by foot following a steep and strenuous hiking trail. In the summer of 2013 we began to collect vertical profiles of aerosol by carrying an instrumented backpack up to the summit of the mountain, with the goal of studying the vertical structure of atmospheric aerosols from the marine boundary layer to the free troposphere. The backpack was carried from the base of trail at 1200m asl. The backpack was equipped with the following instruments: 1. Nephelometer to measure light scattering from aerosol 2. 2-size optical particle counter (300-500 nm) 3. Portable micro-aethalometer to measure absorbing aerosols 4. SEM/TEM sampler to collect particles for off-line electron microscopy analysis 5. Battery powered data logger to measure relative humidity, temperature and pressure 6. GPS tracking device We provide a preliminary analysis of data collected in 2013 to gain insight on the vertical distribution of aerosol properties in a marine environment from the boundary layer to the free troposphere. The analysis of these data will help us understand the role of aerosol aging, vertical transport and distribution in a marine environment.

Effects of backpacker use, pack stock trail use, and pack stock grazing on water-quality indicators, including nutrients, E. coli, hormones, and pharmaceuticals, in Yosemite National Park, USA

USGS Publications Warehouse

Forrester, Harrison; Clow, David W.; Roche, James W.; Heyvaert, Alan C.; Battaglin, William A.

2017-01-01

We investigated how visitor-use affects water quality in wilderness in Yosemite National Park. During the summers of 2012–2014, we collected and analyzed surface-water samples for water-quality indicators, including fecal indicator bacteria Escherichia coli, nutrients (nitrogen, phosphorus, carbon), suspended sediment concentration, pharmaceuticals, and hormones. Samples were collected upstream and downstream from different types of visitor use at weekly to biweekly intervals and during summer storms. We conducted a park-wide synoptic sampling campaign during summer 2014, and sampled upstream and downstream from meadows to evaluate the mitigating effect of meadows on water quality. At pack stock stream crossings, Escherichia coli concentrations were greater downstream from crossings than upstream (median downstream increase in Escherichia coli of three colony forming units 100 mL−1), with the greatest increases occurring during storms (median downstream increase in Escherichia coli of 32 CFU 100 mL−1). At backpacker use sites, hormones, and pharmaceuticals (e.g., insect repellent) were detected at downstream sites, and Escherichia coli concentrations were greater at downstream sites (median downstream increase in Escherichia coli of 1 CFU 100 mL−1). Differences in water quality downstream vs. upstream from meadows grazed by pack stock were not detectable for most water-quality indicators, however, Escherichia coli concentrations decreased downstream, suggesting entrapment and die-off of fecal indicator bacteria in meadows. Our results indicate that under current-use levels pack stock trail use and backpacker use are associated with detectable, but relatively minor, effects on water quality, which are most pronounced during storms.

Effects of electrofishing gear type on spatial and temporal variability in fish community sampling

USGS Publications Warehouse

Meador, M.R.; McIntyre, J.P.

2003-01-01

Fish community data collected from 24 major river basins between 1993 and 1998 as part of the U.S. Geological Survey's National Water-Quality Assessment Program were analyzed to assess multiple-reach (three consecutive reaches) and multiple-year (three consecutive years) variability in samples collected at a site. Variability was assessed using the coefficient of variation (CV; SD/mean) of species richness, the Jaccard index (JI), and the percent similarity index (PSI). Data were categorized by three electrofishing sample collection methods: backpack, towed barge, and boat. Overall, multiple-reach CV values were significantly lower than those for multiple years, whereas multiple-reach JI and PSI values were significantly greater than those for multiple years. Multiple-reach and multiple-year CV values did not vary significantly among electrofishing methods, although JI and PSI values were significantly greatest for backpack electrofishing across multiple reaches and multiple years. The absolute difference between mean species richness for multiple-reach samples and mean species richness for multiple-year samples was 0.8 species (9.5% of total species richness) for backpack samples, 1.7 species (10.1%) for towed-barge samples, and 4.5 species (24.4%) for boat-collected samples. Review of boat-collected fish samples indicated that representatives of four taxonomic families - Catostomidae, Centrarchidae, Cyprinidae, and Ictaluridae - were collected at all sites. Of these, catostomids exhibited greater interannual variability than centrarchids, cyprinids, or ictalurids. Caution should be exercised when combining boat-collected fish community data from different years because of relatively high interannual variability, which is primarily due to certain relatively mobile species. Such variability may obscure longer-term trends.

Effects of Backpacker Use, Pack Stock Trail Use, and Pack Stock Grazing on Water-Quality Indicators, Including Nutrients, E. coli, Hormones, and Pharmaceuticals, in Yosemite National Park, USA

NASA Astrophysics Data System (ADS)

Forrester, Harrison; Clow, David; Roche, James; Heyvaert, Alan; Battaglin, William

2017-09-01

We investigated how visitor-use affects water quality in wilderness in Yosemite National Park. During the summers of 2012-2014, we collected and analyzed surface-water samples for water-quality indicators, including fecal indicator bacteria Escherichia coli, nutrients (nitrogen, phosphorus, carbon), suspended sediment concentration, pharmaceuticals, and hormones. Samples were collected upstream and downstream from different types of visitor use at weekly to biweekly intervals and during summer storms. We conducted a park-wide synoptic sampling campaign during summer 2014, and sampled upstream and downstream from meadows to evaluate the mitigating effect of meadows on water quality. At pack stock stream crossings, Escherichia coli concentrations were greater downstream from crossings than upstream (median downstream increase in Escherichia coli of three colony forming units 100 mL-1), with the greatest increases occurring during storms (median downstream increase in Escherichia coli of 32 CFU 100 mL-1). At backpacker use sites, hormones, and pharmaceuticals (e.g., insect repellent) were detected at downstream sites, and Escherichia coli concentrations were greater at downstream sites (median downstream increase in Escherichia coli of 1 CFU 100 mL-1). Differences in water quality downstream vs. upstream from meadows grazed by pack stock were not detectable for most water-quality indicators, however, Escherichia coli concentrations decreased downstream, suggesting entrapment and die-off of fecal indicator bacteria in meadows. Our results indicate that under current-use levels pack stock trail use and backpacker use are associated with detectable, but relatively minor, effects on water quality, which are most pronounced during storms.

Design of Portable Mass Spectrometers with Handheld Probes: Aspects of the Sampling and Miniature Pumping Systems

NASA Astrophysics Data System (ADS)

Chen, Chien-Hsun; Chen, Tsung-Chi; Zhou, Xiaoyu; Kline-Schoder, Robert; Sorensen, Paul; Cooks, R. Graham; Ouyang, Zheng

2015-02-01

Miniature mass spectrometry analytical systems of backpack configuration fitted with sampling probes could potentially be of significant interest for in-field, real-time chemical analysis. In this study, various configurations were explored in which a long narrow tube was used to connect the turbo and backing pumps used to create and maintain vacuum. Also, for the first time we introduced two new types of pumps for miniature mass spectrometers, the Creare 130 g drag pump and Creare 350 g scroll backing pump. These pumps, along with another Creare 550 turbo pump and the commercially available Pfeiffer HiPace 10 turbo and KnF diaphragm backing pumps, were tested with the backpack configurations. The system performance, especially the scan time, was characterized when used with a discontinuous atmospheric pressure interface (DAPI) for ion introduction. The pumping performance in the pressure region above 1 mtorr is critical for DAPI operation. The 550 g turbo pump was shown to have a relatively higher pumping speed above 1 mtorr and gave a scan time of 300 ms, almost half the value obtained with the larger, heavier HiPace 10 often used with miniature mass spectrometers. The 350 g scroll pump was also found to be an improvement over the diaphragm pumps generally used as backing pumps. With a coaxial low temperature plasma ion source, direct analysis of low volatility compounds glass slides was demonstrated, including 1 ng DNP (2,4-Dinitrophenol) and 10 ng TNT (2,4,6-trinitrotoluene) with Creare 550 g turbo pump as well as 10 ng cocaine and 20 ng DNP with Creare 130 g drag pump.

Design of Portable Mass Spectrometers with Handheld Probes: Aspects of the Sampling and Miniature Pumping Systems

PubMed Central

Chen, Chien-Hsun; Chen, Tsung-Chi; Zhou, Xiaoyu; Kline-Schoder, Robert; Sorensen, Paul; Cooks, R. Graham; Ouyang, Zheng

2014-01-01

Miniature mass spectrometry analytical systems of backpack configuration fitted with sampling probes could potentially be of significant interest for in-field, real-time chemical analysis. In this study, various configurations were explored in which a long narrow tube was used to connect the turbo and backing pumps used to create and maintain vacuum. Also, for the first time we introduced two new types of pumps for miniature mass spectrometers, the Creare 130g drag pump and Creare 350g scroll backing pump. These pumps, along with another Creare 550 turbo pump and the commercially available Pfeiffer HiPace 10 turbo and KnF diaphragm backing pumps, were tested with the backpack configurations. The system performance, especially the scan time, was characterized when used with a discontinuous atmospheric pressure interface (DAPI) for ion introduction. The pumping performance in the pressure region above 1 mtorr is critical for DAPI operation. The 550g turbo pump was shown to have a relatively higher pumping speed above 1 mtorr and gave a scan time of 300 ms, almost half the value obtained with the larger, heavier HiPace 10 often used with miniature mass spectrometers. The 350 g scroll pump was also found to be an improvement over the diaphragm pumps generally used as backing pumps. With a coaxial low temperature plasma ion source, direct analysis of low volatility compounds glass slides was demonstrated, including 1 ng DNP (2,4-Dinitrophenol) and 10ng TNT (2,4,6-trinitrotoluene) with Creare 550g turbo pump as well as 10 ng cocaine and 20 ng DNP with Creare 130g drag pump. PMID:25404157

Design of portable mass spectrometers with handheld probes: aspects of the sampling and miniature pumping systems.

PubMed

Chen, Chien-Hsun; Chen, Tsung-Chi; Zhou, Xiaoyu; Kline-Schoder, Robert; Sorensen, Paul; Cooks, R Graham; Ouyang, Zheng

2015-02-01

Miniature mass spectrometry analytical systems of backpack configuration fitted with sampling probes could potentially be of significant interest for in-field, real-time chemical analysis. In this study, various configurations were explored in which a long narrow tube was used to connect the turbo and backing pumps used to create and maintain vacuum. Also, for the first time we introduced two new types of pumps for miniature mass spectrometers, the Creare 130 g drag pump and Creare 350 g scroll backing pump. These pumps, along with another Creare 550 turbo pump and the commercially available Pfeiffer HiPace 10 turbo and KnF diaphragm backing pumps, were tested with the backpack configurations. The system performance, especially the scan time, was characterized when used with a discontinuous atmospheric pressure interface (DAPI) for ion introduction. The pumping performance in the pressure region above 1 mtorr is critical for DAPI operation. The 550 g turbo pump was shown to have a relatively higher pumping speed above 1 mtorr and gave a scan time of 300 ms, almost half the value obtained with the larger, heavier HiPace 10 often used with miniature mass spectrometers. The 350 g scroll pump was also found to be an improvement over the diaphragm pumps generally used as backing pumps. With a coaxial low temperature plasma ion source, direct analysis of low volatility compounds glass slides was demonstrated, including 1 ng DNP (2,4-Dinitrophenol) and 10 ng TNT (2,4,6-trinitrotoluene) with Creare 550 g turbo pump as well as 10 ng cocaine and 20 ng DNP with Creare 130 g drag pump.

Battery driven 8 channel pulse height analyzer with compact, single gamma-peak display

DOEpatents

Morgan, John P.; Piper, Thomas C.

1991-01-01

The invention comprises a hand-held wand including an l.e.d. display and a aI photomultiplier tube encased in lead or other suitable gamma shielding material, and an electronics and battery back-pack package connected to the wand.

Comparative efficacy of existing surveillance tools for Aedes aegypti in Western Kenya.

PubMed

Yalwala, Sancto; Clark, Jeffrey; Oullo, David; Ngonga, Daniel; Abuom, David; Wanja, Elizabeth; Bast, Joshua

2015-12-01

All traditional surveillance techniques for Aedes aegypti have been developed for the cosmopolitan domestic subspecies Ae. aegypti aegypti, and not the sylvatic subspecies, Ae. aegypti formosus. The predominant form in Western Kenya is Ae. aegypti formosus that is rarely associated with human habitations but is linked to transmission of sylvatic dengue virus strains. We compared five surveillance methods for their effectiveness in sampling Ae. aegypti formosus with the goal of determining a sustainable surveillance strategy in Kenya. The methods included larval and pupal surveys, oviposition trapping, BG-Sentinel trapping, resting boxes, and backpack aspirations. Larval and pupal surveys collected the highest number of Ae. aegypti formosus (51.3%), followed by oviposition traps (45.7%), BG-Sentinel traps (3.0%), and zero collected with either backpack aspiration or resting box collections. No Ae. aegypti formosus larvae or pupae were found indoors. The results indicate that oviposition traps and outdoor larval and pupal surveys were better surveillance methods for Ae. aegypti formosus in Western Kenya. © 2015 The Society for Vector Ecology.

Dispersal of Male Aedes aegypti in a Coastal Village in Southern Mexico

PubMed Central

Valerio, Laura; Facchinelli, Luca; Ramsey, Janine M.; Scott, Thomas W.

2012-01-01

Most Aedes aegypti dispersal studies have focused on females because of their central role in dengue virus transmission. Only a few mark-release-recapture (MRR) studies provided insights into male Ae. aegypti dispersal. To fill this knowledge gap, we conducted five male Ae. aegypti MRR experiments in a coastal village in southern Mexico. Small and large male cohorts were marked with fluorescent dusts, released outside buildings, and recaptures were carried out by using backpack aspirators. Recapture rates ranged between 0.35% and 6.55% and median distance traveled was 12–166 meters. A statistically significant difference in median distance traveled with large males dispersing farther than small ones was detected only in one experiment (MRR5: U = 3.5, P < 0.01). Male dispersal data will be useful for constructing and estimating parameter values and validating models that will be used to plan the most effective release strategies for genetically modified male Ae. aegypti. PMID:22492152

Effects of radiomarking on prairie falcons: Attachment failures provide insights about survival

USGS Publications Warehouse

Steenhof, Karen; Bates, Kirk K.; Fuller, Mark R.; Kochert, Michael N.; McKinley, James O.; Lukacs, Paul M.

2006-01-01

From 1999–2002, we attached satellite-received platform transmitter terminals (PTTs) to 40 adult female prairie falcons (Falco mexicanus) on their nesting grounds in the Snake River Birds of Prey National Conservation Area (NCA) in southwest Idaho. We used 3 variations of a backpack harness design that had been used previously on raptors. Each radiomarked falcon also received a color leg band with a unique alphanumeric code. We monitored survival of birds using radiotelemetry and searched for marked birds on their nesting grounds during breeding seasons after marking. Because 6 falcons removed their harnesses during the first year, we were able to compare survival rates of birds that shed PTTs with those that retained them. We describe a harness design that failed prematurely as well as designs that proved successful for long-term PTT attachment. We resighted 21 marked individuals on nesting areas 1–5 years after they were radiomarked and documented 13 mortalities of satellite-tracked falcons. We used a Cormack-Jolly-Seber model to estimate apparent survival probability based on band resighting and telemetry data. Platform transmitter terminals had no short-term effects on falcons or their nesting success during the nesting season they were marked, but birds that shed their transmitters increased their probability of survival. Estimated annual survival for birds that shed their transmitters was 87% compared to 49% for birds wearing transmitters. We discuss possible reasons for differences in apparent survival rates and offer recommendations for future marking of falcons.

Effects of radio marking on prairie falcons: Attachment failures provide insights about survival

USGS Publications Warehouse

Steenhof, Karen; Bates, Kirk K.; Fuller, Mark R.; Kochert, Michael N.; McKinley, J.O.; Lukacs, Paul M.

2006-01-01

From 1999-2002, we attached satellite-received platform transmitter terminals (PTTs) to 40 adult female prairie falcons (Falco mexicanus) on their nesting grounds in the Snake River Birds of Prey National Conservation Area (NCA) in southwest Idaho. We used 3 variations of a backpack harness design that had been used previously on raptors. Each radiomarked falcon also received a color leg band with a unique alphanumeric code. We monitored survival of birds using radiotelemetry and searched for marked birds on their nesting grounds during breeding seasons after marking. Because 6 falcons removed their harnesses during the first year, we were able to compare survival rates of birds that shed PTTs with those that retained them. We describe a harness design that failed prematurely as well as designs that proved successful for long-term PTT attachment. We resighted 21 marked individuals on nesting areas 1-5 years after they were radiomarked and documented 13 mortalities of satellite-tracked falcons. We used a Cormack-Jolly-Seber model to estimate apparent survival probability based on band resighting and telemetry data. Platform transmitter terminals had no short-term effects on falcons or their nesting success during the nesting season they were marked, but birds that shed their transmitters increased their probability of survival. Estimated annual survival for birds that shed their transmitters was 87% compared to 49% for birds wearing transmitters. We discuss possible reasons for differences in apparent survival rates and offer recommendations for future marking of falcons.

Widespread skin rash following travel to South-East Asia.

PubMed

Creamer, Andrew

2014-02-20

A 21-year-old man presented with a widespread, intensely pruritic skin rash, which developed acutely 5 days after returning from a backpacking holiday in Thailand. On initial presentation to his general practitioner, an erythematous, papular rash was noted in the upper right back, with smaller clusters of lesions on the buttocks and right arm. Based on the anatomical distribution of the lesions, a preliminary diagnosis of shingles was made. Over the following 2 weeks, the lesions failed to improve, and new snake-like lesions appeared. A dermatologist made the diagnosis of cutaneous larva migrans. The skin lesions rapidly resolved following oral albendazole therapy.

Bridge-in-a-Backpack(TM). Task 3 : investigation of durability enhancements relative to abrasion from ice and other sources.

DOT National Transportation Integrated Search

2013-02-01

The arch-shaped concrete filled fiber reinforced polymer tube bridges are being constructed throughout New : England and elsewhere. The composite system durability and maintenance requirements need to be evaluated. For : this study, an asymmetric hyb...

Ontological modelling of knowledge management for human-machine integrated design of ultra-precision grinding machine

NASA Astrophysics Data System (ADS)

Hong, Haibo; Yin, Yuehong; Chen, Xing

2016-11-01

Despite the rapid development of computer science and information technology, an efficient human-machine integrated enterprise information system for designing complex mechatronic products is still not fully accomplished, partly because of the inharmonious communication among collaborators. Therefore, one challenge in human-machine integration is how to establish an appropriate knowledge management (KM) model to support integration and sharing of heterogeneous product knowledge. Aiming at the diversity of design knowledge, this article proposes an ontology-based model to reach an unambiguous and normative representation of knowledge. First, an ontology-based human-machine integrated design framework is described, then corresponding ontologies and sub-ontologies are established according to different purposes and scopes. Second, a similarity calculation-based ontology integration method composed of ontology mapping and ontology merging is introduced. The ontology searching-based knowledge sharing method is then developed. Finally, a case of human-machine integrated design of a large ultra-precision grinding machine is used to demonstrate the effectiveness of the method.

Rubber airplane: Constraint-based component-modeling for knowledge representation in computer-aided conceptual design

NASA Technical Reports Server (NTRS)

Kolb, Mark A.

1990-01-01

Viewgraphs on Rubber Airplane: Constraint-based Component-Modeling for Knowledge Representation in Computer Aided Conceptual Design are presented. Topics covered include: computer aided design; object oriented programming; airfoil design; surveillance aircraft; commercial aircraft; aircraft design; and launch vehicles.

Exploration and implementation of ontology-based cultural relic knowledge map integration platform

NASA Astrophysics Data System (ADS)

Yang, Weiqiang; Dong, Yiqiang

2018-05-01

To help designers to better carry out creative design and improve the ability of searching traditional cultural relic information, the ontology-based knowledge map construction method was explored and an integrated platform for cultural relic knowledge map was developed. First of all, the construction method of the ontology of cultural relics was put forward, and the construction of the knowledge map of cultural relics was completed based on the constructed cultural relic otology. Then, a personalized semantic retrieval framework for creative design was proposed. Finally, the integrated platform of the knowledge map of cultural relics was designed and realized. The platform was divided into two parts. One was the foreground display system, which was used for designers to search and browse cultural relics. The other was the background management system, which was for cultural experts to manage cultural relics' knowledge. The research results showed that the platform designed could improve the retrieval ability of cultural relic information. To sum up, the platform can provide a good support for the designer's creative design.

Terrestrial applications of FEP-encapsulated solar cell modules. [power systems using Fluorinated Ethylene Propylene encapsulation

NASA Technical Reports Server (NTRS)

Forestieri, A. F.; Ratajczak, A. F.

1974-01-01

The NASA-Lewis Research Center program of transferring the FEP-encapsulated solar cell technology developed for the space program to terrestrial applications is presented. The electrical power system design and the array mechanical design are described, and power systems being tested are discussed. The latter are located at NOAA-RAMOS weather stations at Sterling, Va., and Mammoth Mountain, Calif.; on the roof of the Lewis Research Center; on a NOAA-Coast Guard buoy in the Gulf of Mexico; in a U.S. Forest Service mountaintop voice repeater station in the Inyo National Forest, Calif., and in a backpack charger for portable transmitter/receivers being used in the same place. Preliminary results of testing are still incomplete, but show that rime ice can cause cracks in modular cells without damaging the FEP though, which keeps the grid lines intact, and that electrically active elements of the module must be completely sealed from salt water to prevent FEP delamination.

Hubble Space Telescope Design Engineering Knowledgebase (HSTDEK)

NASA Technical Reports Server (NTRS)

Johannes, James D.; Everetts, Clark

1989-01-01

The research covered here pays specific attention to the development of tools to assist knowledge engineers in acquiring knowledge and to assist other technical, engineering, and management personnel in automatically performing knowledge capture as part of their everyday work without adding any extra work to what they already do. Requirements for data products, the knowledge base, and methods for mapping knowledge in the documents onto the knowledge representations are discussed, as are some of the difficulties of capturing in the knowledge base the structure of the design process itself, along with a model of the system designed. The capture of knowledge describing the interactions of different components is also discussed briefly.

Knowledge workers and knowledge-intense organizations, Part 2: Designing and managing for productivity.

PubMed

Weaver, D; Sorrells-Jones, J

1999-09-01

Our economy is shifting from a hard goods and material products base to one in which knowledge is the primary mode of production. Organizations are experimenting with designs that support knowledge work by clustering individuals with different but complementary skills in focused teams. The goal is to increase applied knowledge that furthers the organization's strategic intent. The team-based knowledge work model holds promise for healthcare organizations that are under pressure to use knowledge to improve clinical care, integrate care across disciplines and settings, and accept accountability for costs. However, the shift from the traditional bureaucratic model to the flexible team-based design mandates changes in the design of the organization, the role of leadership, and the attributes of the teams and team members. In Part 2 of this three-part series, the authors explore the necessary design changes and the new roles for leadership, teams, and their members. Additionally, implications for healthcare clinicians, particularly nurses, are discussed.

All-Girls Adventure Programmes: What Are the Benefits?

ERIC Educational Resources Information Center

Whittington, Anja; Mack, Erica Nixon; Budbill, Nadine W.; McKenney, Priscilla

2011-01-01

This study examined the benefits of all-girls adventure programmes from the perspective of adolescent girls. Participants included 361 girls aged 10-17 years from diverse ethnic and socio-economic backgrounds who completed a variety of adventure programmes. Adventure activities included rock climbing, sea kayaking, mountaineering, backpacking,…

75 FR 11132 - Marine Mammals; File No. 15261

Federal Register 2010, 2011, 2012, 2013, 2014

2010-03-10

... form for a permit to conduct research on leopard seals (Hydrurga leptonyx) in Antarctica. DATES.... Ponganis proposes to study the foraging behavior of leopard seals at Cape Washington, Antarctica. Backpack digital cameras and time depth recorders would be deployed on up to five leopard seals annually over five...

Internet-Savvy Students.

ERIC Educational Resources Information Center

Van Horn, Royal

2003-01-01

Describes national study of the attitudes and behaviors of middle and high school students who use the Internet. Finds that Internet-savvy students use the Internet as a virtual book and reference library, a tutor and study shortcut, a study group, a guidance counselor, and a locker, backpack, and notebook. Offers several explanations about the…

SR450 and Superhawk XP applications of Bacillus thuringiensis israelensis de Barjac against Culex quinquefasciatus Say

USDA-ARS?s Scientific Manuscript database

Sprayer comparisons and larval morality assays were conducted following SR450 backpack mist blower and Superhawk XP thermal fogger applications of Vectobac® WDG Bacillus thuringiensis israelensis (Bti) de Barjac against Culex quinquefasciatus Say. Bacillus thuringiensis israelensis was applied at m...

Texting Identities: Lessons for Classrooms from Multiethnic Youth Space

ERIC Educational Resources Information Center

Paris, Django

2010-01-01

Paris examines texts worn on objects (like clothing or backpacks), delivered over electronic media, and rapped by youth emcees at a multiethnic high school. He argues that these are identity texts, used by young people to express ethnic and linguistic differences. (Contains 2 figures and 7 notes.)

The Backpack Generation and Art History

ERIC Educational Resources Information Center

Curtis, James M.

2001-01-01

Many aspects of the current cultural situation bode well for undergraduate art education. Today's college students have had more experience of the visual arts, at least in their vernacular forms, than any generation in history. They have watched thousands of hours of television, watched hundreds of feature films, and often have mastered computer…

Predicting Metabolic Cost of Running with and without Backpack Loads

DTIC Science & Technology

1987-01-01

would higher than generated by our prediction model. he more demanding for the cardiorespiratory sys - These differences, however, could be accounted...197) nabes te pedicionof rg cost ill women walking and running in %hoes and metabol cot aor walki) nande runin arditio af wieoots. I rgiinomics 29:439

Virtually Unpacking Your Backpack: Educational Philosophy and Pedagogical Praxis

ERIC Educational Resources Information Center

Franklin, Yvette

2014-01-01

In this autoethnographic, conceptual philosophical reflection, the author inquires: "Can my students and I, in a technologically mediated virtual space, harness the work of philosophy of education scholars to engage in a shared experience of (re)considering paths to sensitivity to diversity for equity and equality?" The author engages…

Load Carriage Induced Alterations of Pulmonary Function

DTIC Science & Technology

1989-01-01

pulmonar , function reductions are directh’ related to the backpack load carried due to the mechanical constraint it imposes on the thoracic cage.2 To...and Fish- man. A.P.. 1965. The regulation of venttlation in diffuse Agostor. E.. D’Angelc, E. and Piolini, M., 1978. Breathing pulmonary fibrosis . J

Multimodal Sensor Fusion for Personnel Detection

DTIC Science & Technology

2011-07-01

video ). Efficacy of UGS systems is often limited by high false alarm rates because the onboard data processing algorithms may not be able to correctly...humans) and animals (e.g., donkeys , mules, and horses). The humans walked alone and in groups with and without backpacks; the animals were led by their

Outdoorsman, Unit II.

ERIC Educational Resources Information Center

Alberta Dept. of Agriculture, Edmonton.

The second of three units of the 4-H Outdoorsman Program introduces more advanced camping and survival techniques for 4-H members in British Columbia, Alberta, Saskatchewan, and Manitoba. Backpacking, finding food in the wild, making a fire without matches, lashing techniques, axemanship, finding your way (with and without a compass), making a…

Automated extraction of knowledge for model-based diagnostics

NASA Technical Reports Server (NTRS)

Gonzalez, Avelino J.; Myler, Harley R.; Towhidnejad, Massood; Mckenzie, Frederic D.; Kladke, Robin R.

1990-01-01

The concept of accessing computer aided design (CAD) design databases and extracting a process model automatically is investigated as a possible source for the generation of knowledge bases for model-based reasoning systems. The resulting system, referred to as automated knowledge generation (AKG), uses an object-oriented programming structure and constraint techniques as well as internal database of component descriptions to generate a frame-based structure that describes the model. The procedure has been designed to be general enough to be easily coupled to CAD systems that feature a database capable of providing label and connectivity data from the drawn system. The AKG system is capable of defining knowledge bases in formats required by various model-based reasoning tools.

Shared Knowledge among Graphic Designers, Instructional Designers and Subject Matter Experts in Designing Multimedia-Based Instructional Media

ERIC Educational Resources Information Center

Razak, Rafiza Abdul

2013-01-01

The research identified and explored the shared knowledge among the instructional multimedia design and development experts comprising of subject matter expert, graphic designer and instructional designer. The knowledge shared by the team was categorized into three groups of multimedia design principles encompasses of basic principles, authoring…

Tabletop computed lighting for practical digital photography.

PubMed

Mohan, Ankit; Bailey, Reynold; Waite, Jonathan; Tumblin, Jack; Grimm, Cindy; Bodenheimer, Bobby

2007-01-01

We apply simplified image-based lighting methods to reduce the equipment, cost, time, and specialized skills required for high-quality photographic lighting of desktop-sized static objects such as museum artifacts. We place the object and a computer-steered moving-head spotlight inside a simple foam-core enclosure and use a camera to record photos as the light scans the box interior. Optimization, guided by interactive user sketching, selects a small set of these photos whose weighted sum best matches the user-defined target sketch. Unlike previous image-based relighting efforts, our method requires only a single area light source, yet it can achieve high-resolution light positioning to avoid multiple sharp shadows. A reduced version uses only a handheld light and may be suitable for battery-powered field photography equipment that fits into a backpack.

Using diagnostic experiences in experience-based innovative design

NASA Astrophysics Data System (ADS)

Prabhakar, Sattiraju; Goel, Ashok K.

1992-03-01

Designing a novel class of devices requires innovation. Often, the design knowledge of these devices does not identify and address the constraints that are required for their performance in the real world operating environment. So any new design adapted from these devices tend to be similarly sketchy. In order to address this problem, we propose a case-based reasoning method called performance driven innovation (PDI). We model the design as a dynamic process, arrive at a design by adaptation from the known designs, generate failures for this design for some new constraints, and then use this failure knowledge to generate the required design knowledge for the new constraints. In this paper, we discuss two aspects of PDI: the representation of PDI cases and the translation of the failure knowledge into design knowledge for a constraint. Each case in PDI has two components: design and failure knowledge. Both of them are represented using a substance-behavior-function model. Failure knowledge has internal device failure behaviors and external environmental behaviors. The environmental behavior, for a constraint, interacting with the design behaviors, results in the failure internal behavior. The failure adaptation strategy generates functions, from the failure knowledge, which can be addressed using the routine design methods. These ideas are illustrated using a coffee-maker example.

Current Standardization and Cooperative Efforts Related to Industrial Information Infrastructures.

DTIC Science & Technology

1993-05-01

Data Management Systems: Components used to store, manage, and retrieve data. Data management includes knowledge bases, database management...Application Development Tools and Methods X/Open and POSIX APIs Integrated Design Support System (IDS) Knowledge -Based Systems (KBS) Application...IDEFlx) Yourdon Jackson System Design (JSD) Knowledge -Based Systems (KBSs) Structured Systems Development (SSD) Semantic Unification Meta-Model

Preliminary Design of a Consultation Knowledge-Based System for the Minimization of Distortion in Welded Structures

DTIC Science & Technology

1989-02-01

which capture the knowledge of such experts. These Expert Systems, or Knowledge-Based Systems’, differ from the usual computer programming techniques...their applications in the fields of structural design and welding is reviewed. 5.1 Introduction Expert Systems, or KBES, are computer programs using Al...procedurally constructed as conventional computer programs usually are; * The knowledge base of such systems is executable, unlike databases 3 "Ill

Deliberate Excellence

ERIC Educational Resources Information Center

Weast, Jerry D.

2010-01-01

Every autumn, 50 million children load their backpacks and head off to public school. Most children embark on the adventure of a new school year with a mix of anxiety and anticipation. Many excuses are offered for the failures of public education. Still, on their very first day of school, kindergartners and new teachers alike arrive with the…

JPRS Report, Proliferation Issues

DTIC Science & Technology

1993-06-07

Ruta Skatikaite; RESPUBLIKA, 19 May 93] ................................................................................ 20 Radioactive Beryllium...nuclear fuel will be transported around 2000 to a reprocessing facility in [Yi] IAEA surveillance cameras are said to take four photos Tokai, Ibaraki...Comparing these two methods, the method of extracting May 93 pp 342-346. plutonium is similar to carrying a backpack to transport goods, while

Factors Determining Peer Status in Outdoor Adventure Groups

ERIC Educational Resources Information Center

Richmond, Dan; Sibthorp, Jim; Jostad, Jeremy; Gookin, John

2016-01-01

In this study of 227 students enrolled on 30-day backpacking courses, we examined how certain demographic factors relate to status within the task (goal-related) and social (interpersonal) domains of group functioning. Of particular interest were socioeconomic status (SES) and gender. Using a mixed methods approach, we found that female students…

A multigear protocol for sampling crayfish assemblages in Gulf of Mexico coastal streams

Treesearch

William R. Budnick; William E. Kelso; Susan B. Adams; Michael D. Kaller

2018-01-01

Identifying an effective protocol for sampling crayfish in streams that vary in habitat and physical/chemical characteristics has proven problematic. We evaluated an active, combined-gear (backpack electrofishing and dipnetting) sampling protocol in 20 Coastal Plain streams in Louisiana. Using generalized linear models and rarefaction curves, we evaluated environmental...

Laptops Unleashed A Middle School Experience

ERIC Educational Resources Information Center

Livingston, Pamela

2004-01-01

The day starts. Students arrive in their parents' cars, climb out, and carry or wheel backpacks in a morning scene similar to most independent day schools in the country. But there's a difference--the older students are carrying metal briefcases. The briefcases, bright silver and durable-looking, carry the clear marks of middle school ownership as…

Astronaut Bruce McCandless tests astronaut maneuvering unit

NASA Image and Video Library

1973-08-16

S72-30704 (1972) --- Astronaut Bruce McCandless II, backup pilot for Skylab 2, tests the balance and control of an astronaut maneuvering unit (AMU) test model at Martin Marietta Corporation's Denver division. The jet-powered backpack can fly for 30 minutes and can be worn over normal clothing or spacesuit. Photo credit: NASA

Are block nets necessary? Movement of stream-dwelling salmonids in response to three common survey methods

Treesearch

James T. Peterson; Nolan P. Banish; Russell F. Thurow

2005-01-01

Fish movement during sampling may negatively bias sample data and population estimates. We evaluated the short-term movements of stream-dwelling salmonids by recapture of marked individuals during day and night snorkeling and backpack electrofishing. Bull trout Salvelinus confluentus and rainbow trout Oncorhynchus mykiss were...

The Oh! Oh! Factor: A Primer on Gear (Part One of Two).

ERIC Educational Resources Information Center

Fish, Peter

1994-01-01

Describes appropriate gear for day hikers and backpackers including boots, clothing, insulators, raingear, and parkas. Discusses the advantages and disadvantages of natural and synthetic fibers and materials. Describes methods for keeping moisture away from sleeping bags. Stresses the importance of being prepared for any type of weather when…

Thought Textbooks Would All Be Gone by Now? Well, Think Again

ERIC Educational Resources Information Center

Trotter, Andrew

2007-01-01

Compared with a couple of years ago, children in many California schools have one less tome to lug in their backpacks. Instead of standard textbooks, they use what publisher Pearson Education Inc. calls its "digital path" to California's elementary history and social sciences curriculum. Since the state school board approved it in…

Beyond Backpacks and Bus Tokens: Next Steps for a District Homeless Student Initiative

ERIC Educational Resources Information Center

Hallett, Ronald E.; Low, Justin A.; Skrla, Linda

2015-01-01

How policies get translated and enacted by school districts frame how students experience reforms associated with federal law. This qualitative case study of a Northern California school district explores the importance of integrating homeless student initiatives within all aspects of the district functioning. Drawing from the equity framework of…

Will the Real Eco-Educator Please Stand Up?

ERIC Educational Resources Information Center

Ross, Janet

This paper examines the long-term impact on public lands of human-powered adventure activities. These activities take individuals into federal- or state-owned wild areas to enjoy backpacking, hiking, camping, and a wide variety of sports. Trends in supply and demand for outdoor opportunities are explored. Factors influencing demand include growing…

Trends in Media Use

ERIC Educational Resources Information Center

Roberts, Donald F.; Foehr, Ulla G.

2008-01-01

American youth are awash in media. They have television sets in their bedrooms, personal computers in their family rooms, and digital music players and cell phones in their backpacks. They spend more time with media than any single activity other than sleeping, with the average American eight- to eighteen-year-old reporting more than six hours of…

Herbicide site preparation and release options for eucalyptus plantation establishment in the western gulf

Treesearch

Michael A. Blazier; John Johnson; Eric L. Taylor; Brad Osbon

2012-01-01

Cold-tolerant species of eucalyptus (Eucalyptus spp.) are increasingly grown in the Western Gulf region as short-rotation pulpwood feedstock. Operational chemical suppression of competing vegetation has been relatively costly and inefficient because it requires frequent applications of glyphosate applied via backpack sprayers. A series of studies...

Using Family Backpacks as a Tool to Involve Families in Teaching Young Children about Healthy Eating

ERIC Educational Resources Information Center

Hong, Jisoo; Bales, Diane W.; Wallinga, Charlotte R.

2018-01-01

Children's obesity rates have increased substantially over the past several decades, due in part to unhealthy eating habits. About 75% of preschool-aged children consume fewer fruits and vegetables than recommended for health. Because children begin developing eating habits during early childhood, obesity prevention programs are increasingly…

Conviction of the Heart: Implementing Leave-No-Trace Principles in Outdoor Recreation

ERIC Educational Resources Information Center

Morley, Laurie; Chase, Matthew R.; Day, Ralph W.; Lawhon, Ben

2008-01-01

As a result of the increased interest in nontraditional activities, such as mountain biking and backpacking, many public schools are incorporating outdoor education into their curriculum. However, little attention has been given to educating students about the impacts that outdoor activities can have on the environment. It is important that…

Career Guidance in Multicultural Societies: Identity, Alterity, Epiphanies and Pitfalls

ERIC Educational Resources Information Center

Sultana, Ronald G.

2017-01-01

This paper provides a scoping approach to the issue of career guidance in multicultural societies. It starts off by exploring the meaning of "culture," moving away from "back-pack" approaches that consider culture as a set of worldviews and dispositions that are readily shed or put on, to anthropological understandings of…

Techniques for Improving the Performance of Future EVA Maneuvering Systems

NASA Technical Reports Server (NTRS)

Williams, Trevor W.

1995-01-01

The Simplified Aid for EVA Rescue (SAFER) is a small propulsive backpack that was developed as an in-house effort at Johnson Space Center; it is a lightweight system which attaches to the underside of the Primary Life Support Subsystem (PLSS) backpack of the Extravehicular Mobility Unit (EMU). SAFER provides full six-axis control, as well as Automatic Attitude Hold (AAH), by means of a set of cold-gas nitrogen thrusters and a rate sensor-based control system. For compactness, a single hand controller is used, together with mode switching, to command all six axes. SAFER was successfully test-flown on the STS-64 mission in September 1994 as a Development Test Objective (DTO); development of an operational version is now proceeding. This version will be available for EVA self-rescue on the International Space Station and Mir, starting with the STS-86/Mir-7 mission in September 1997. The DTO SAFER was heavily instrumented, and produced in-flight data that was stored in a 12 MB computer memory on-board. This has allowed post-flight analysis to yield good estimates for the actual mass properties (moments and products of inertia and center of mass location) encountered on-orbit. By contrast, Manned Maneuvering Unit (MMU) post-flight results were generated mainly from analysis of video images, and so were not very accurate. The main goal of the research reported here was to use the detailed SAFER on-orbit mass properties data to optimize the design of future EVA maneuvering systems, with the aim being to improve flying qualities and/or reduce propellant consumption. The Automation, Robotics and Simulation Division Virtual Reality (VR) Laboratory proved to be a valuable research tool for such studies. A second objective of the grant was to generate an accurate dynamics model in support of the reflight of the DTO SAFER on STS-76/Mir-3. One complicating factor was the fact that a hand controller stowage box was added to the underside of SAFER on this flight; the position of this box was such that two of the SAFER jets plume it. A second complication was that the EVA astronaut will sometimes be transporting a massive experiment package. This will not only alter the overall mass properties significantly, but can itself also be plumed.

Design of a Knowledge Driven HIS

PubMed Central

Pryor, T. Allan; Clayton, Paul D.; Haug, Peter J.; Wigertz, Ove

1987-01-01

Design of the software architecture for a knowledge driven HIS is presented. In our design the frame has been used as the basic unit of knowledge representation. The structure of the frame is being designed to be sufficiently universal to contain knowledge required to implement not only expert systems, but almost all traditional HIS functions including ADT, order entry and results review. The design incorporates a two level format for the knowledge. The first level as ASCII records is used to maintain the knowledge base while the second level converted by special knowledge compilers to standard computer languages is used for efficient implementation of the knowledge applications.

Knowledge Acquisition and Job Training for Advanced Technical Skills Using Immersive Virtual Environment

NASA Astrophysics Data System (ADS)

Watanuki, Keiichi; Kojima, Kazuyuki

The environment in which Japanese industry has achieved great respect is changing tremendously due to the globalization of world economies, while Asian countries are undergoing economic and technical development as well as benefiting from the advances in information technology. For example, in the design of custom-made casting products, a designer who lacks knowledge of casting may not be able to produce a good design. In order to obtain a good design and manufacturing result, it is necessary to equip the designer and manufacturer with a support system related to casting design, or a so-called knowledge transfer and creation system. This paper proposes a new virtual reality based knowledge acquisition and job training system for casting design, which is composed of the explicit and tacit knowledge transfer systems using synchronized multimedia and the knowledge internalization system using portable virtual environment. In our proposed system, the education content is displayed in the immersive virtual environment, whereby a trainee may experience work in the virtual site operation. Provided that the trainee has gained explicit and tacit knowledge of casting through the multimedia-based knowledge transfer system, the immersive virtual environment catalyzes the internalization of knowledge and also enables the trainee to gain tacit knowledge before undergoing on-the-job training at a real-time operation site.

Identified research directions for using manufacturing knowledge earlier in the product lifecycle

PubMed Central

Hedberg, Thomas D.; Hartman, Nathan W.; Rosche, Phil; Fischer, Kevin

2016-01-01

Design for Manufacturing (DFM), especially the use of manufacturing knowledge to support design decisions, has received attention in the academic domain. However, industry practice has not been studied enough to provide solutions that are mature for industry. The current state of the art for DFM is often rule-based functionality within Computer-Aided Design (CAD) systems that enforce specific design requirements. That rule-based functionality may or may not dynamically affect geometry definition. And, if rule-based functionality exists in the CAD system, it is typically a customization on a case-by-case basis. Manufacturing knowledge is a phrase with vast meanings, which may include knowledge on the effects of material properties decisions, machine and process capabilities, or understanding the unintended consequences of design decisions on manufacturing. One of the DFM questions to answer is how can manufacturing knowledge, depending on its definition, be used earlier in the product lifecycle to enable a more collaborative development environment? This paper will discuss the results of a workshop on manufacturing knowledge that highlights several research questions needing more study. This paper proposes recommendations for investigating the relationship of manufacturing knowledge with shape, behavior, and context characteristics of product to produce a better understanding of what knowledge is most important. In addition, the proposal includes recommendations for investigating the system-level barriers to reusing manufacturing knowledge and how model-based manufacturing may ease the burden of knowledge sharing. Lastly, the proposal addresses the direction of future research for holistic solutions of using manufacturing knowledge earlier in the product lifecycle. PMID:27990027

Identified research directions for using manufacturing knowledge earlier in the product lifecycle.

PubMed

Hedberg, Thomas D; Hartman, Nathan W; Rosche, Phil; Fischer, Kevin

2017-01-01

Design for Manufacturing (DFM), especially the use of manufacturing knowledge to support design decisions, has received attention in the academic domain. However, industry practice has not been studied enough to provide solutions that are mature for industry. The current state of the art for DFM is often rule-based functionality within Computer-Aided Design (CAD) systems that enforce specific design requirements. That rule-based functionality may or may not dynamically affect geometry definition. And, if rule-based functionality exists in the CAD system, it is typically a customization on a case-by-case basis. Manufacturing knowledge is a phrase with vast meanings, which may include knowledge on the effects of material properties decisions, machine and process capabilities, or understanding the unintended consequences of design decisions on manufacturing. One of the DFM questions to answer is how can manufacturing knowledge, depending on its definition, be used earlier in the product lifecycle to enable a more collaborative development environment? This paper will discuss the results of a workshop on manufacturing knowledge that highlights several research questions needing more study. This paper proposes recommendations for investigating the relationship of manufacturing knowledge with shape, behavior, and context characteristics of product to produce a better understanding of what knowledge is most important. In addition, the proposal includes recommendations for investigating the system-level barriers to reusing manufacturing knowledge and how model-based manufacturing may ease the burden of knowledge sharing. Lastly, the proposal addresses the direction of future research for holistic solutions of using manufacturing knowledge earlier in the product lifecycle.

An expert system for the design of heating, ventilating, and air-conditioning systems

NASA Astrophysics Data System (ADS)

Camejo, Pedro Jose

1989-12-01

Expert systems are computer programs that seek to mimic human reason. An expert system shelf, a software program commonly used for developing expert systems in a relatively short time, was used to develop a prototypical expert system for the design of heating, ventilating, and air-conditioning (HVAC) systems in buildings. Because HVAC design involves several related knowledge domains, developing an expert system for HVAC design requires the integration of several smaller expert systems known as knowledge bases. A menu program and several auxiliary programs for gathering data, completing calculations, printing project reports, and passing data between the knowledge bases are needed and have been developed to join the separate knowledge bases into one simple-to-use program unit.

A Capstone Wiki Knowledge Base: A Case Study of an Online Tool Designed to Promote Life-Long Learning through Engineering Literature Research

ERIC Educational Resources Information Center

Clarke, James B.; Coyle, James R.

2011-01-01

This article reports the results of a case study in which an experimental wiki knowledge base was designed, developed, and tested by the Brill Science Library at Miami University for an undergraduate engineering senior capstone project. The wiki knowledge base was created to determine if the science library could enhance the engineering literature…

Challenging the Knowledge-Transfer Orthodoxy: Knowledge Co-construction in Technology-Enhanced Learning for Children with Autism

ERIC Educational Resources Information Center

Guldberg, Karen; Parsons, Sarah; Porayska-Pomsta, Kaska; Keay-Bright, Wendy

2017-01-01

Experimental intervention studies constitute the current dominant research designs in the autism education field. Such designs are based on a "knowledge-transfer" model of evidence-based practice in which research is conducted by researchers, and is then "transferred" to practitioners to enable them to implement evidence-based…

PVDaCS - A prototype knowledge-based expert system for certification of spacecraft data

NASA Technical Reports Server (NTRS)

Wharton, Cathleen; Shiroma, Patricia J.; Simmons, Karen E.

1989-01-01

On-line data management techniques to certify spacecraft information are mandated by increasing telemetry rates. Knowledge-based expert systems offer the ability to certify data electronically without the need for time-consuming human interaction. Issues of automatic certification are explored by designing a knowledge-based expert system to certify data from a scientific instrument, the Orbiter Ultraviolet Spectrometer, on an operating NASA planetary spacecraft, Pioneer Venus. The resulting rule-based system, called PVDaCS (Pioneer Venus Data Certification System), is a functional prototype demonstrating the concepts of a larger system design. A key element of the system design is the representation of an expert's knowledge through the usage of well ordered sequences. PVDaCS produces a certification value derived from expert knowledge and an analysis of the instrument's operation. Results of system performance are presented.

The Violence of Collection: "Indian Killer"'s Archives

ERIC Educational Resources Information Center

Dean, Janet

2008-01-01

At the close of Sherman Alexie's "Indian Killer," in a final chapter titled "Creation Story," a killer carries a backpack containing, among other things, "dozens of owl feathers, a scrapbook, and two bloody scalps in a plastic bag." Readers schooled in the psychopathologies of real and fictional serial killers will be familiar with the detail:…

The Application of Recognition-Primed Decision Theory to Decisions Made in an Outdoor Education Context

ERIC Educational Resources Information Center

Boyes, Mike; Potter, Tom

2015-01-01

This research examined the decisions that highly experienced outdoor leaders made on backpacking expeditions conducted by a tertiary institution in the Southern Alps of New Zealand. The purpose of the research was to document decision problems and explore them as Recognition-Primed Decisions (RPD) within naturalistic decision making (NDM)…

76 FR 1129 - Agency Information Collection Activities: Proposed Collection; Comment Request-Evaluation of the...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-01-07

... districts as eligible for free and reduced-price school meals will be eligible to receive delivered meals. Children, age 18 and younger, normally eligible to receive meals at SFSP sites, will be eligible to receive weekend and holiday meals under the Food Backpack Demonstration Project. In addition, the Act directed the...

Don't Stop Stuffing the Backpacks!: Parents of English Language Learners Share School-Home Communication Preferences

ERIC Educational Resources Information Center

Hoffman, Lisa; Podikunju-Hussain, Shifa; Ridout, Susan

2015-01-01

As communications in U.S. society become more digitally focused, many schools have transitioned toward using more digital technology for school-home communications. Across the country, many schools and teachers now disseminate information to students' parents using email listserv, text message, Twitter, Facebook, and other applications such as…

Why Is There a Gay Pride Flag on My 9-Year-Old's Backpack?

ERIC Educational Resources Information Center

Sedillo, Paul James

2018-01-01

Gifted children are often empathetic, morally sensitive, and feel a responsibility toward others. As they become aware of the injustices in their surrounding communities, they may embark on a quest for justice for individuals who are oppressed, marginalized, or misunderstood. With Gay Pride Month in June bringing increased visibility and awareness…

Cellular Telephone Use: A Survey of College Business Students

ERIC Educational Resources Information Center

Braguglia, Kay H.

2008-01-01

Whether it is hand held, in a pocket, on a backpack, clipped to a belt, or hidden in a brief case or purse, college students and cellular telephones go together. Communication with fellow students, professors, parents, and everyone else is just a click away. While walking across campus and down the halls of academic buildings, cellular telephones…

The Social Psychology of Perception Experiments: Hills, Backpacks, Glucose, and the Problem of Generalizability

ERIC Educational Resources Information Center

Durgin, Frank H.; Klein, Brennan; Spiegel, Ariana; Strawser, Cassandra J.; Williams, Morgan

2012-01-01

Experiments take place in a physical environment but also a social environment. Generalizability from experimental manipulations to more typical contexts may be limited by violations of ecological validity with respect to either the physical or the social environment. A replication and extension of a recent study (a blood glucose manipulation) was…

A Thematic Unit: Let's Go to School in Japan!

ERIC Educational Resources Information Center

Haxhi, Jessica

2009-01-01

During this five-day unit, students will enter the world of a Japanese classroom. They will talk about school uniforms, "fill" their backpacks with school items, and learn how to do a simple self-introduction in front of their peers. Students will participate in the cultural customs of a Japanese classroom and view pictures, videos, and…

Apollo Portable Life Support System

NASA Image and Video Library

1968-06-11

S68-34580 (1968) --- With its exterior removed, the Apollo portable life support system (PLSS) can be easily studied. The PLSS is worn as a backpack over the Extravehicular Mobility Unit (EMU), a multi-layered spacesuit used for outside-the-spacecraft activity. JSC photographic frame no. S68-34582 is a close-up view of the working parts of the PLSS.

Association mapping analysis of the response to Macrophomina phaseolina in the Andean Diversity Panel

USDA-ARS?s Scientific Manuscript database

The Andean Diversity Panel was evaluated for response to inoculation with charcoal rot in a field trial in Isabela, Puerto Rico in 2012. The trial was inoculated with backpack sprayers at flowering and a visual evaluation was conducted three weeks later. There was a broad range of response, with abo...

Bring It to Class: Unpacking Pop Culture in Literacy Learning (Grades 4 through 12)

ERIC Educational Resources Information Center

Hagood, Margaret C.; Alvermann, Donna E.; Heron-Hruby, Alison

2010-01-01

Students' backpacks bulge not just with oversize textbooks, but with paperbacks, graphic novels, street lit, and electronics such as iPods and handheld video games. This book is about unpacking those texts to explore previously unexamined assumptions regarding their usefulness to classroom learning. With a strong theoretical grounding and many…

Survival and reproduction of radio-marked adult spotted owls.

Treesearch

C.C. Foster; E.D. Forsman; E.C. Meslow; G.S. Miller; J.A. Reid; F.F. Wagner; A.B. Carey; J.B. Lint

1992-01-01

We compared survival, reproduction, and body mass of radio-marked and non radio-marked spotted owls (Strix occidentalis) to determine if backpack radios influenced reproduction or survival. In most study areas and years, there were no differences (P > 0.05) in survival of males and females or in survival of radio-marked versus banded owls. There...

Visitor satisfactions: backcountry and wilderness users in the White Mountain National Forest

Treesearch

Chad P. Dawson; Rebecca Oreskes; Frederick Kacprzynski; Tom More

2002-01-01

The opportunities and conditions sought by visitors in national forest backcountry and wilderness areas can affect the satisfaction they have with the experience. This study measured the recreation satisfaction ratings of hikers and backpackers during their trips to backcountry and wilderness areas in the White Mountain National Forest. Field interviews were conducted...

Before You Search that Locker.

ERIC Educational Resources Information Center

Dowling-Sendor, Benjamin

1998-01-01

In DesRoches v Caprio, federal district court ruled in favor of Jim DesRoches who had decided not to consent to a search of his backpack for a pair of allegedly stolen sneakers. Judge Robert G. Doumar decided the need to find the stolen sneakers did not outweigh the students' privacy interest and offered guidelines about school searches for stolen…

VIP: A knowledge-based design aid for the engineering of space systems

NASA Technical Reports Server (NTRS)

Lewis, Steven M.; Bellman, Kirstie L.

1990-01-01

The Vehicles Implementation Project (VIP), a knowledge-based design aid for the engineering of space systems is described. VIP combines qualitative knowledge in the form of rules, quantitative knowledge in the form of equations, and other mathematical modeling tools. The system allows users rapidly to develop and experiment with models of spacecraft system designs. As information becomes available to the system, appropriate equations are solved symbolically and the results are displayed. Users may browse through the system, observing dependencies and the effects of altering specific parameters. The system can also suggest approaches to the derivation of specific parameter values. In addition to providing a tool for the development of specific designs, VIP aims at increasing the user's understanding of the design process. Users may rapidly examine the sensitivity of a given parameter to others in the system and perform tradeoffs or optimizations of specific parameters. A second major goal of VIP is to integrate the existing corporate knowledge base of models and rules into a central, symbolic form.

Innovation and design of a web-based pain education interprofessional resource.

PubMed

Lax, Leila; Watt-Watson, Judy; Lui, Michelle; Dubrowski, Adam; McGillion, Michael; Hunter, Judith; Maclennan, Cameron; Knickle, Kerry; Robb, Anja; Lapeyre, Jaime

2011-01-01

The present article describes educational innovation processes and design of a web-based pain interprofessional resource for prelicensure health science students in universities across Canada. Operationalization of educational theory in design coupled with formative evaluation of design are discussed, along with strategies that support collaborative innovation. Educational design was driven by content, theory and evaluation. Pain misbeliefs and teaching points along the continuum from acute to persistent pain were identified. Knowledge-building theory, situated learning, reflection and novel designs for cognitive scaffolding were then employed. Design research principles were incorporated to inform iterative and ongoing design. An authentic patient case was constructed, situated in interprofessional complex care to highlight learning objectives related to pre-operative, postoperative and treatment up to one year, for a surgical cancer patient. Pain mechanisms, assessment and management framed content creation. Knowledge building scaffolds were used, which included video simulations, embedded resources, concurrent feedback, practice-based reflective exercises and commentaries. Scaffolds were refined to specifically support knowledge translation. Illustrative commentaries were designed to explicate pain misbeliefs and best practices. Architecture of the resource was mapped; a multimedia, interactive prototype was created. This pain education resource was developed primarily for individual use, with extensions for interprofessional collective discourse. Translation of curricular content scripts into representation maps supported the collaborative design process by establishing a common visual language. The web-based prototype will be formatively and summatively evaluated to assess pedagogic design, knowledge-translation scaffolds, pain knowledge gains, relevance, feasibility and fidelity of this educational innovation.

Expert system for the design of heating, ventilating, and air-conditioning systems. Master's thesis

DOE Office of Scientific and Technical Information (OSTI.GOV)

Camejo, P.J.

1989-12-01

Expert systems are computer programs that seek to mimic human reason. An expert system shelf, a software program commonly used for developing expert systems in a relatively short time, was used to develop a prototypical expert system for the design of heating, ventilating, and air-conditioning (HVAC) systems in buildings. Because HVAC design involves several related knowledge domains, developing an expert system for HVAC design requires the integration of several smaller expert systems known as knowledge bases. A menu program and several auxiliary programs for gathering data, completing calculations, printing project reports, and passing data between the knowledge bases are neededmore » and have been developed to join the separate knowledge bases into one simple-to-use program unit.« less

Knowledge repositories for multiple uses

NASA Technical Reports Server (NTRS)

Williamson, Keith; Riddle, Patricia

1991-01-01

In the life cycle of a complex physical device or part, for example, the docking bay door of the Space Station, there are many uses for knowledge about the device or part. The same piece of knowledge might serve several uses. Given the quantity and complexity of the knowledge that must be stored, it is critical to maintain the knowledge in one repository, in one form. At the same time, because of quantity and complexity of knowledge that must be used in life cycle applications such as cost estimation, re-design, and diagnosis, it is critical to automate such knowledge uses. For each specific use, a knowledge base must be available and must be in a from that promotes the efficient performance of that knowledge base. However, without a single source knowledge repository, the cost of maintaining consistent knowledge between multiple knowledge bases increases dramatically; as facts and descriptions change, they must be updated in each individual knowledge base. A use-neutral representation of a hydraulic system for the F-111 aircraft was developed. The ability to derive portions of four different knowledge bases is demonstrated from this use-neutral representation: one knowledge base is for re-design of the device using a model-based reasoning problem solver; two knowledge bases, at different levels of abstraction, are for diagnosis using a model-based reasoning solver; and one knowledge base is for diagnosis using an associational reasoning problem solver. It was shown how updates issued against the single source use-neutral knowledge repository can be propagated to the underlying knowledge bases.

Developing effective web-based regional anesthesia education: a randomized study evaluating case-based versus non-case-based module design.

PubMed

Kopp, Sandra L; Smith, Hugh M

2011-01-01

Little is known about the use of Web-based education in regional anesthesia training. Benefits of Web-based education include the ability to standardize learning material quality and content, build appropriate learning progressions, use interactive multimedia technologies, and individualize delivery of course materials. The goals of this investigation were (1) to determine whether module design influences regional anesthesia knowledge acquisition, (2) to characterize learner preference patterns among anesthesia residents, and (3) to determine whether learner preferences play a role in knowledge acquisition. Direct comparison of knowledge assessments, learning styles, and learner preferences will be made between an interactive case-based and a traditional textbook-style module design. Forty-three Mayo Clinic anesthesiology residents completed 2 online modules, a knowledge pretest, posttest, an Index of Learning Styles assessment, and a participant satisfaction survey. Interscalene and lumbar plexus regional techniques were selected as the learning content for 4 Web modules constructed using the Blackboard Vista coursework application. One traditional textbook-style module and 1 interactive case-based module were designed for each of the interscalene and lumbar plexus techniques. Participants scored higher on the postmodule knowledge assessment for both of the interscalene and lumbar plexus modules. Postmodule knowledge performance scores were independent of both module design (interactive case-based versus traditional textbook style) and learning style preferences. However, nearly all participants reported a preference for Web-based learning and believe that it should be used in anesthesia resident education. Participants did not feel that Web-base learning should replace the current lecture-based curriculum. All residents scored higher on the postmodule knowledge assessment, but this improvement was independent of the module design and individual learning styles. Although residents believe that online learning should be used in anesthesia training, the results of this study do not demonstrate improved learning or justify the time and expense of developing complex case-based training modules. While there may be practical benefits of Web-based education, educators in regional anesthesia should be cautious about developing curricula based on learner preference data.

An Investigation of Knowledge-Building Activities in an Online Community of Practice at Subaru of America

ERIC Educational Resources Information Center

Land, Susan M.; Draper, Darryl C.; Ma, Ziyan; Hsieh, Hsiu-Wei; Smith, Brian K.; Jordan, Robert

2009-01-01

Current approaches to workplace learning emphasize designing communities of practice that are intended to support both formal and informal knowledge acquisition. This article presents the design and research of a knowledge-based community of practice for Subaru, based on principles outlined by Scardamalia (2002) and Zhang, Scardamalia, Lamon,…

Energy harvesting through a backpack employing a mechanically amplified piezoelectric stack

NASA Astrophysics Data System (ADS)

Feenstra, Joel; Granstrom, Jon; Sodano, Henry

2008-04-01

Over the past few decades, the use of portable and wearable electronics has grown steadily. These devices are becoming increasingly more powerful, however, the gains that have been made in the device performance has resulted in the need for significantly higher power to operate the electronics. This issue has been further complicated due to the stagnate growth of battery technology over the past decade. In order to increase the life of these electronics, researchers have begun investigating methods of generating energy from ambient sources such that the life of the electronics can be prolonged. Recent developments in the field have led to the design of a number of mechanisms that can be used to generate electrical energy, from a variety of sources including thermal, solar, strain, inertia, etc. Many of these energy sources are available for use with humans, but their use must be carefully considered such that parasitic effects that could disrupt the user's gait or endurance are avoided. This study develops a novel energy harvesting backpack that can generate electrical energy from the differential forces between the wearer and the pack. The goal of this system is to make the energy harvesting device transparent to the wearer such that his or her endurance and dexterity is not compromised. This will be accomplished by replacing the strap buckle with a mechanically amplified piezoelectric stack actuator. Piezoelectric stack actuators have found little use in energy harvesting applications due to their high stiffness which makes straining the material difficult. This issue will be alleviated using a mechanically amplified stack which allows the relatively low forces generated by the pack to be transformed to high forces on the piezoelectric stack. This paper will develop a theoretical model of the piezoelectric buckle and perform experimental testing to validate the model accuracy and energy harvesting performance.

Integrating a hip belt with body armour reduces the magnitude and changes the location of shoulder pressure and perceived discomfort in soldiers.

PubMed

Lenton, Gavin K; Doyle, Tim L A; Saxby, David J; Billing, Dan; Higgs, Jeremy; Lloyd, David G

2018-04-01

Soldiers carry heavy loads that may cause general discomfort, shoulder pain and injury. This study assessed if new body armour designs that incorporated a hip belt reduced shoulder pressures and improved comfort. Twenty-one Australian soldiers completed treadmill walking trials wearing six different body armours with two different loads (15 and 30 kg). Contact pressures applied to the shoulders were measured using pressure pads, and qualitative assessment of comfort and usability were acquired from questionnaires administered after walking trials. Walking with hip belt compared to no hip belt armour resulted in decreased mean and maximum shoulder pressures (p < 0.005), and 30% fewer participants experiencing shoulder discomfort (p < 0.005) in best designs, although hip discomfort did increase. Laterally concentrated shoulder pressures were associated with 1.34-times greater likelihood of discomfort (p = 0.026). Results indicate body armour and backpack designs should integrate a hip belt and distribute load closer to shoulder midline to reduce load carriage discomfort and, potentially, injury risk. Practitioner Summary: Soldiers carry heavy loads that increase their risk of discomfort and injury. New body armour designs are thought to ease this burden by transferring the load to the hips. This study demonstrated that designs incorporating a hip belt reduced shoulder pressure and shoulder discomfort compared to the current armour design.

Interoperability-oriented Integration of Failure Knowledge into Functional Knowledge and Knowledge Transformation based on Concepts Mapping

NASA Astrophysics Data System (ADS)

Koji, Yusuke; Kitamura, Yoshinobu; Kato, Yoshikiyo; Tsutsui, Yoshio; Mizoguchi, Riichiro

In conceptual design, it is important to develop functional structures which reflect the rich experience in the knowledge from previous design failures. Especially, if a designer learns possible abnormal behaviors from a previous design failure, he or she can add an additional function which prevents such abnormal behaviors and faults. To do this, it is a crucial issue to share such knowledge about possible faulty phenomena and how to cope with them. In fact, a part of such knowledge is described in FMEA (Failure Mode and Effect Analysis) sheets, function structure models for systematic design and fault trees for FTA (Fault Tree Analysis).

The Shuttle Radar Topography Mission: A Global DEM

NASA Technical Reports Server (NTRS)

Farr, Tom G.; Kobrick, Mike

2000-01-01

Digital topographic data are critical for a variety of civilian, commercial, and military applications. Scientists use Digital Elevation Models (DEM) to map drainage patterns and ecosystems, and to monitor land surface changes over time. The mountain-building effects of tectonics and the climatic effects of erosion can also be modeled with DEW The data's military applications include mission planning and rehearsal, modeling and simulation. Commercial applications include determining locations for cellular phone towers, enhanced ground proximity warning systems for aircraft, and improved maps for backpackers. The Shuttle Radar Topography Mission (SRTM) (Fig. 1), is a cooperative project between NASA and the National Imagery and Mapping Agency (NIMA) of the U.S. Department of Defense. The mission is designed to use a single-pass radar interferometer to produce a digital elevation model of the Earth's land surface between about 60 degrees north and south latitude. The DEM will have 30 m pixel spacing and about 15 m vertical errors.

Automated knowledge base development from CAD/CAE databases

NASA Technical Reports Server (NTRS)

Wright, R. Glenn; Blanchard, Mary

1988-01-01

Knowledge base development requires a substantial investment in time, money, and resources in order to capture the knowledge and information necessary for anything other than trivial applications. This paper addresses a means to integrate the design and knowledge base development process through automated knowledge base development from CAD/CAE databases and files. Benefits of this approach include the development of a more efficient means of knowledge engineering, resulting in the timely creation of large knowledge based systems that are inherently free of error.

KBGIS-II: A knowledge-based geographic information system

NASA Technical Reports Server (NTRS)

Smith, Terence; Peuquet, Donna; Menon, Sudhakar; Agarwal, Pankaj

1986-01-01

The architecture and working of a recently implemented Knowledge-Based Geographic Information System (KBGIS-II), designed to satisfy several general criteria for the GIS, is described. The system has four major functions including query-answering, learning and editing. The main query finds constrained locations for spatial objects that are describable in a predicate-calculus based spatial object language. The main search procedures include a family of constraint-satisfaction procedures that use a spatial object knowledge base to search efficiently for complex spatial objects in large, multilayered spatial data bases. These data bases are represented in quadtree form. The search strategy is designed to reduce the computational cost of search in the average case. The learning capabilities of the system include the addition of new locations of complex spatial objects to the knowledge base as queries are answered, and the ability to learn inductively definitions of new spatial objects from examples. The new definitions are added to the knowledge base by the system. The system is performing all its designated tasks successfully. Future reports will relate performance characteristics of the system.

Physiological evaluation of men wearing three different toxicological protective systems

DOE Office of Scientific and Technical Information (OSTI.GOV)

Levine, L.; Cadarette, B.S.; Sawka, M.N.

1989-08-01

This study examined the physiological responses of seven volunteers exercising in the heat while wearing three different toxicological protective systems. The Toxicological Agent Protective (TAP) suit has been available for use for more than 30 years while the other two protective systems are developmental efforts. The Self-Contained Toxicological Environmental Protection Outfit (STEPO) includes either a backpack-rebreather (with CO{sub 2} scrubber) and ice-cooling vest (STEPO-R), or a tether system which supplies breathing/cooling air inside the suit (STEPO-T). After the volunteers were heat acclimated, the three toxicological protection systems were evaluated utilizing a counter-balanced experimental design initially in a hot and thenmore » in a cool environment while subjects walked at 1.12 m/s, 0% grade for an attempted two hours. There was no statistical advantage of any one system in terms of exercise time in the cool environment. While evaporated sweating rate was greater for the STEPO-T in the cool environment compared to both STEPO-R and TAP. Development efforts to improve the STEPO system designs continue, and physiological evaluation of new developmental models is underway.« less

Applications of artificial intelligence 1993: Knowledge-based systems in aerospace and industry; Proceedings of the Meeting, Orlando, FL, Apr. 13-15, 1993

NASA Technical Reports Server (NTRS)

Fayyad, Usama M. (Editor); Uthurusamy, Ramasamy (Editor)

1993-01-01

The present volume on applications of artificial intelligence with regard to knowledge-based systems in aerospace and industry discusses machine learning and clustering, expert systems and optimization techniques, monitoring and diagnosis, and automated design and expert systems. Attention is given to the integration of AI reasoning systems and hardware description languages, care-based reasoning, knowledge, retrieval, and training systems, and scheduling and planning. Topics addressed include the preprocessing of remotely sensed data for efficient analysis and classification, autonomous agents as air combat simulation adversaries, intelligent data presentation for real-time spacecraft monitoring, and an integrated reasoner for diagnosis in satellite control. Also discussed are a knowledge-based system for the design of heat exchangers, reuse of design information for model-based diagnosis, automatic compilation of expert systems, and a case-based approach to handling aircraft malfunctions.

Knowledge modeling tool for evidence-based design.

PubMed

Durmisevic, Sanja; Ciftcioglu, Ozer

2010-01-01

The aim of this study is to take evidence-based design (EBD) to the next level by activating available knowledge, integrating new knowledge, and combining them for more efficient use by the planning and design community. This article outlines a framework for a performance-based measurement tool that can provide the necessary decision support during the design or evaluation of a healthcare environment by estimating the overall design performance of multiple variables. New knowledge in EBD adds continuously to complexity (the "information explosion"), and it becomes impossible to consider all aspects (design features) at the same time, much less their impact on final building performance. How can existing knowledge and the information explosion in healthcare-specifically the domain of EBD-be rendered manageable? Is it feasible to create a computational model that considers many design features and deals with them in an integrated way, rather than one at a time? The found evidence is structured and readied for computation through a "fuzzification" process. The weights are calculated using an analytical hierarchy process. Actual knowledge modeling is accomplished through a fuzzy neural tree structure. The impact of all inputs on the outcome-in this case, patient recovery-is calculated using sensitivity analysis. Finally, the added value of the model is discussed using a hypothetical case study of a patient room. The proposed model can deal with the complexities of various aspects and the relationships among variables in a coordinated way, allowing existing and new pieces of evidence to be integrated in a knowledge tree structure that facilitates understanding of the effects of various design interventions on overall design performance.

Scaffolding knowledge building in a Web-based communication and cultural competence program for international medical graduates.

PubMed

Lax, Leila R; Russell, M Lynn; Nelles, Laura J; Smith, Cathy M

2009-10-01

Professional behaviors, tacitly understood by Canadian-trained physicians, are difficult to teach and often create practice barriers for IMGs. The purpose of this design research study was to develop a Web-based program simulating Canadian medical literacy and culture, and to evaluate strategies of scaffolding individual knowledge building. Study 1 (N = 20) examined usability and pedagogic design. Studies 2 (N = 39) and 3 (N = 33) examined case participation patterns. Model design was validated in Study 1. Studies 2 and 3 demonstrated high levels of participation, on unprompted third tries, on knowledge tests. Recursive patterns were strongest on Reflective Exercises. Five strategies scaffolded knowledge building: (1) video simulations, (2) contextualized resources, (3) concurrent feedback, (4) Reflective Exercises, and (5) commentaries prompting "reflection on reflection." Scaffolded design supports complex knowledge building. These findings are concurrent with educational research on the importance of recursion and revision of knowledge for improvable and relational understanding.

Expert System for Automated Design Synthesis

NASA Technical Reports Server (NTRS)

Rogers, James L., Jr.; Barthelemy, Jean-Francois M.

1987-01-01

Expert-system computer program EXADS developed to aid users of Automated Design Synthesis (ADS) general-purpose optimization program. EXADS aids engineer in determining best combination based on knowledge of specific problem and expert knowledge stored in knowledge base. Available in two interactive machine versions. IBM PC version (LAR-13687) written in IQ-LISP. DEC VAX version (LAR-13688) written in Franz-LISP.

Design, Analysis and User Acceptance of Architectural Design Education in Learning System Based on Knowledge Management Theory

ERIC Educational Resources Information Center

Wu, Yun-Wu; Lin, Yu-An; Wen, Ming-Hui; Perng, Yeng-Hong; Hsu, I-Ting

2016-01-01

The major purpose of this study is to develop an architectural design knowledge management learning system with corresponding learning activities to help the students have meaningful learning and improve their design capability in their learning process. Firstly, the system can help the students to obtain and share useful knowledge. Secondly,…

The swing of it: Hammock camping

USGS Publications Warehouse

Marion, Jeff

2016-01-01

Hammock camping is dramatically expanding along the Appalachian Trail and raising both questions and concerns among Trail land managers, club members, and backpackers. This article examines some of the advantages and disadvantages of hammock camping, including resource and social impacts. Some Leave No Trace hammock camping practices are included for those using hammocks at well-established campsites and when "pristine-site" camping.

ASTRONAUT MANEUVERING UNIT (AMU) - GEMINI 12 - EVALUATION - ASTRONAUT ALDRIN - MCDONNELL AIRCRAFT CORP. (MDAC), M0

NASA Image and Video Library

1966-08-15

S66-51073 (15 Aug. 1966) --- Astronaut Edwin E. Aldrin Jr., prime crew pilot of the Gemini-12 spaceflight, undergoes evaluation procedures with the Astronaut Maneuvering Unit in the 30-foot altitude chamber at McDonnell. The suited Aldrin is wearing an AMU backpack and an Extravehicular Life Support System (ELSS) chest pack. Photo credit: NASA

Digital Learning for All, Now--A School Leader's Guide for 1:1 on a Budget

ERIC Educational Resources Information Center

Costa, Jonathan P., Sr.

2012-01-01

Instead of carrying bulging backpacks, imagine students carrying mobile devices that allow them to access information from anywhere at any time. How do we transition from print to digital learning in the midst of economic challenges? This breakthrough guide shows educators how to affordably make the shift to one-to-one computing and transform…

Outdoor Pursuits: Self to Nature Activities -- A Supplement to the Physical Education Course of Study. The Protestant School Board of Greater Montreal, March 1974.

ERIC Educational Resources Information Center

Mingie, Walter; And Others

In keeping with the Department of Education's course content in physical education, this supplement to the Physical Education Course of Study was prepared. Suggestions for teaching and organizing classes in 16 "Self to Nature" activities are outlined. Activities are: backpacking, bicycling, boating, camping, canoeing, fishing, hebertisme (an…

The effects of burning and grazing on survival, home range, and prey dynamics of the Texas horned lizard in a thornscrub ecosystem

Treesearch

Anna L. Burrow; Richard T. Kazmaier; Eric C. Hellgren; Donald C. Ruthven, III

2002-01-01

We examined the effects of rotational livestock grazing and prescribed winter burning on the state threatened Texas horned lizard, Phrynosoma cornutum, by comparing home range sizes, survival estimates and prey abundance across burning and grazing treatments in southern Texas. Adult lizards were fitted with backpacks carrying radio transmitters and...

Astronaut Edwin Aldrin in EMU verifies fit of Portable Life Support System

NASA Image and Video Library

1969-06-25

Astronaut Edwin E. Aldrin Jr., wearing an Extravehicular Mobility Unit (EMU), verifies fit of the Portable Life Support System (PLSS) strap length during lunar surface training at the Kennedy Space Center. Aldrin is the prime crew lunar module pilot of the Apollo 11 lunar landing mission. Aldrin's PLSS backpack is attached to a lunar weight simulator.

Obstacles and Opportunites of iPad Use Balance of Acceptance in a Texas School System

ERIC Educational Resources Information Center

Gros, Lisa Horst

2013-01-01

"A Kindle in Every Backpack", a proposal written by Thomas Z. Freedman and published by the Democratic Leadership council called for a Kindle or some other electronic reading device for every child in the United States in grades kindergarten through 12. The proposal stated that while the electronic reading devices, eReaders, would be…

Apollo Portable Life Support System

NASA Image and Video Library

1968-06-11

S68-34582 (1968) --- With its exterior removed, the Apollo portable life support system (PLSS) can be easily studied. The PLSS is worn as a backpack over the Extravehicular Mobility Unit (EMU) a multi-layered spacesuit used for outside-the-spacecraft activity. JSC photographic frame no. S68-34582 is a wider view of the exposed interior working parts of the PLSS and its removed cover.

Korean Affairs Report.

DTIC Science & Technology

1986-10-24

Meets Japanese Delegation 112 Foreign Visitors 112 CSSR Trade Group Arrives 112 Hungarian Embassy Hosts Film Show ill Chinese Buddhists Delegation...of ground, sea and air forces, special units which use "nuclear backpacks " along with numerous units and personnel specializing in nuclear warfare...considered encouraging to all Asian nations, particularly since the Chinese sports champions and officials are presently participating in the Seoul Asiad in

Effects of radio transmitters on the behavior of Red-headed Woodpeckers.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Vukovich, Mark; Kilgo, John, C.

2009-05-01

ABSTRACT. Previous studies have revealed that radio-transmitters may affect bird behaviors, including feeding rates, foraging behavior, vigilance, and preening behavior. In addition, depending on the method of attachment, transmitters can potentially affect the ability of cavity-nesting birds to use cavities. Our objective was to evaluate effects of transmitters on the behavior of and use of cavities byRed-headedWoodpeckers (Melanerpes erythrocephalus). Using backpack harnesses, we attached 2.1-g transmitter packages that averaged 3.1% of body weight (range = 2.5–3.6%) to Red-headed Woodpeckers. We observed both radio-tagged (N = 23) and nonradio-tagged (N = 28) woodpeckers and determined the percentage of time spent engagedmore » in each of five behaviors: flight, foraging, perching, preening, and territorial behavior. We found no difference between the two groups in the percentage of time engaged in each behavior. In addition, we found that transmitters had no apparent effect on use of cavities for roosting by radio-tagged woodpeckers (N = 25).We conclude that backpack transmitters weighing less than 3.6% of body weight had no impact on either their behavior or their ability to use cavities.« less

Epidemiology of Imported Cutaneous Leishmaniasis at the Hospital for Tropical Diseases, London, United Kingdom: Use of Polymerase Chain Reaction to Identify the Species

PubMed Central

Wall, Emma C.; Watson, Julie; Armstrong, Margaret; Chiodini, Peter L.; Lockwood, Diana N.

2012-01-01

This study reviewed all patients diagnosed with imported cutaneous leishmaniasis (CL) at the Hospital for Tropical Diseases in London, United Kingdom, over an 11-year period. Diagnostic and epidemiologic information was collected prospectively for all patients with imported CL to this hospital during 1998–2009. A total of 223 patients were given a diagnosis of CL. Ninety patients were diagnosed with Old World CL, which was caused most commonly by Leishmania donovani complex (n = 20). A total of 71% were tourists to the Mediterranean region, 36% were migrants or visiting friends and relatives, and 17% were soldiers. One hundred thirty-three patients were given a diagnosis of New World CL. The Leishmania subgenus Viannia caused 97 of these cases; 44% of these were in backpackers and 29% were in soldiers. Polymerase chain reaction was more sensitive and faster for detecting Leishmania DNA (86% for Old World CL and 96% for New World CL) than culture. This is the largest study of imported leishmaniasis, and demonstrates that tourists to the Mediterranean and backpackers in Central and South America are at risk for this disease. PMID:22232460

A semi-implantable multichannel telemetry system for continuous electrical, mechanical and hemodynamical recordings in animal cardiac research.

PubMed

Kong, Wei; Huang, Jian; Rollins, Dennis L; Ideker, Raymond E; Smith, William M

2007-03-01

We have developed an eight-channel telemetry system for studying experimental models of chronic cardiovascular disease. The system is an extension of a previous device that has been miniaturized, reduced in power consumption and provided with increased functionality. We added sensors for ventricular dimension, and coronary artery blood flow and arterial blood pressure that are suitable for use with the system. The telemetry system consists of a front end, a backpack and a host PC. The front end is a watertight stainless steel case with all sensor electronics sealed inside; it acquires dimension, flow, pressure and five cardiac electrograms from selected locations on the heart. The backpack includes a control unit, Bluetooth radio, and batteries. The control unit digitizes eight channels of data from the front end and forwards them to the host PC via Bluetooth link. The host PC has a receiving Bluetooth radio and Labview programs to store and display data. The whole system was successfully tested on the bench and in an animal model. This telemetry system will greatly enhance the ability to study events leading to spontaneous sudden cardiac arrest.

A portable telemetry system for brain stimulation and neuronal activity recording in freely behaving small animals.

PubMed

Ye, Xuesong; Wang, Peng; Liu, Jun; Zhang, Shaomin; Jiang, Jun; Wang, Qingbo; Chen, Weidong; Zheng, Xiaoxiang

2008-09-30

A portable multi-channel telemetry system which can be used for brain stimulation and neuronal activity recording in freely behaving small animals is described here. This system consists of three major components of headstage, backpack and portable Personal Digital Assistant (PDA). The headstage contains high precision instrument amplifiers with high input impedance. The backpack is comprised of two parts: (1) a main board (size: 36 mm x 22 mm x 3.5 mm and weight: 40 g with batteries, 20 g without), with current/voltage stimulator and special circuit suitable for neuronal activity recording and (2) and a bluetooth transceiver, with a high data transmission rate up to 70 kb/s, suitable for downloading stimulation commands and uploading acquired data. We recorded neuronal activities of the primary motor area of a freely behaving rat with 12-bit resolution at 12 k samples/s. The recorded data and analysis results showed that the system was successful by comparing with the commercial equipment Cerebus 128-Channel Data Acquisition System (Cyberkinetics Inc.). Using the PDA, we can control stimulation and recording. It provides a flexible method to do some research work in the circumstances where other approaches would be difficult or impossible.

Effects of radio transmitters on the behavior of Red-headed Woodpeckers.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Vukovich, Mark; Kilgo, John, C.

ABSTRACT. Previous studies have revealed that radio-transmitters may affect bird behaviors, including feeding rates, foraging behavior, vigilance, and preening behavior. In addition, depending on the method of attachment, transmitters can potentially affect the ability of cavity-nesting birds to use cavities. Our objective was to evaluate effects of transmitters on the behavior of and use of cavities byRed-headedWoodpeckers (Melanerpes erythrocephalus). Using backpack harnesses, we attached 2.1-g transmitter packages that averaged 3.1% of body weight (range = 2.5–3.6%) to Red-headed Woodpeckers. We observed both radio-tagged (N = 23) and nonradio-tagged (N = 28) woodpeckers and determined the percentage of time spent engagedmore » in each of five behaviors: flight, foraging, perching, preening, and territorial behavior. We found no difference between the two groups in the percentage of time engaged in each behavior. In addition, we found that transmitters had no apparent effect on use of cavities for roosting by radio-tagged woodpeckers (N = 25).We conclude that backpack transmitters weighing less than 3.6% of body weight had no impact on either their behavior or their ability to use cavities.« less

Design and Diagnosis Problem Solving with Multifunctional Technical Knowledge Bases

DTIC Science & Technology

1992-09-29

STRUCTURE METHODOLOGY Design problem solving is a complex activity involving a number of subtasks. and a number of alternative methods potentially available...Conference on Artificial Intelligence. London: The British Computer Society, pp. 621-633. Friedland, P. (1979). Knowledge-based experimental design ...Computing Milieuxl: Management of Computing and Information Systems- -ty,*m man- agement General Terms: Design . Methodology Additional Key Words and Phrases

Case-Based Capture and Reuse of Aerospace Design Rationale

NASA Technical Reports Server (NTRS)

Leake, David B.

2001-01-01

The goal of this project was to apply artificial intelligence techniques to facilitate capture and reuse of aerospace design rationale. The project combined case-based reasoning (CBR) and concept maps (CMaps) to develop methods for capturing, organizing, and interactively accessing records of experiences encapsulating the methods and rationale underlying expert aerospace design, in order to bring the captured knowledge to bear to support future reasoning. The project's results contribute both principles and methods for effective design-aiding systems that aid capture and access of useful design knowledge. The project has been guided by the tenets that design-aiding systems must: (1) Leverage a designer's knowledge, rather than attempting to replace it; (2) Be able to reflect different designers' differing conceptualizations of the design task, and to clarify those conceptualizations to others; (3) Include capabilities to capture information both by interactive knowledge modeling and during normal use; and (4) Integrate into normal designer tasks as naturally and unobtrusive as possible.

An advanced artificial intelligence tool for menu design.

PubMed

Khan, Abdus Salam; Hoffmann, Achim

2003-01-01

The computer-assisted menu design still remains a difficult task. Usually knowledge that aids in menu design by a computer is hard-coded and because of that a computerised menu planner cannot handle the menu design problem for an unanticipated client. To address this problem we developed a menu design tool, MIKAS (menu construction using incremental knowledge acquisition system), an artificial intelligence system that allows the incremental development of a knowledge-base for menu design. We allow an incremental knowledge acquisition process in which the expert is only required to provide hints to the system in the context of actual problem instances during menu design using menus stored in a so-called Case Base. Our system incorporates Case-Based Reasoning (CBR), an Artificial Intelligence (AI) technique developed to mimic human problem solving behaviour. Ripple Down Rules (RDR) are a proven technique for the acquisition of classification knowledge from expert directly while they are using the system, which complement CBR in a very fruitful way. This combination allows the incremental improvement of the menu design system while it is already in routine use. We believe MIKAS allows better dietary practice by leveraging a dietitian's skills and expertise. As such MIKAS has the potential to be helpful for any institution where dietary advice is practised.

Distributed Knowledge Base Systems for Diagnosis and Information Retrieval.

DTIC Science & Technology

1984-08-01

include Al. Some research has been done by our group and others on intelligent graphical aids, and in knowledgeable data -bases14 ’ 15, 1.3. Problem... data -base possibly mediated by an intelligent data -base assistant1 5’ 21. We will first describe the 1design agents , and then the phases of their...collection of design specialists will not be sufficient for the design task, and will, at least, need an intelligent data -base to keep track of the ongoing

Innovation and design of a web-based pain education interprofessional resource

PubMed Central

Lax, Leila; Watt-Watson, Judy; Lui, Michelle; Dubrowski, Adam; McGillion, Michael; Hunter, Judith; MacLennan, Cameron; Knickle, Kerry; Robb, Anja; Lapeyre, Jaime

2011-01-01

INTRODUCTION: The present article describes educational innovation processes and design of a web-based pain interprofessional resource for prelicensure health science students in universities across Canada. Operationalization of educational theory in design coupled with formative evaluation of design are discussed, along with strategies that support collaborative innovation. METHODS: Educational design was driven by content, theory and evaluation. Pain misbeliefs and teaching points along the continuum from acute to persistent pain were identified. Knowledge-building theory, situated learning, reflection and novel designs for cognitive scaffolding were then employed. Design research principles were incorporated to inform iterative and ongoing design. RESULTS: An authentic patient case was constructed, situated in inter-professional complex care to highlight learning objectives related to pre-operative, postoperative and treatment up to one year, for a surgical cancer patient. Pain mechanisms, assessment and management framed content creation. Knowledge building scaffolds were used, which included video simulations, embedded resources, concurrent feedback, practice-based reflective exercises and commentaries. Scaffolds were refined to specifically support knowledge translation. Illustrative commentaries were designed to explicate pain misbeliefs and best practices. Architecture of the resource was mapped; a multimedia, interactive prototype was created. This pain education resource was developed primarily for individual use, with extensions for interprofessional collective discourse. DISCUSSION: Translation of curricular content scripts into representation maps supported the collaborative design process by establishing a common visual language. The web-based prototype will be formatively and summatively evaluated to assess pedagogic design, knowledge-translation scaffolds, pain knowledge gains, relevance, feasibility and fidelity of this educational innovation. PMID:22184552

A Knowledge Conversion Model Based on the Cognitive Load Theory for Architectural Design Education

ERIC Educational Resources Information Center

Wu, Yun-Wu; Liao, Shin; Wen, Ming-Hui; Weng, Kuo-Hua

2017-01-01

The education of architectural design requires balanced curricular arrangements of respectively theoretical knowledge and practical skills to really help students build their knowledge structures, particularly helping them in solving the problems of cognitive load. The purpose of this study is to establish an architectural design knowledge…

Participatory approach to the development of a knowledge base for problem-solving in diabetes self-management.

PubMed

Cole-Lewis, Heather J; Smaldone, Arlene M; Davidson, Patricia R; Kukafka, Rita; Tobin, Jonathan N; Cassells, Andrea; Mynatt, Elizabeth D; Hripcsak, George; Mamykina, Lena

2016-01-01

To develop an expandable knowledge base of reusable knowledge related to self-management of diabetes that can be used as a foundation for patient-centric decision support tools. The structure and components of the knowledge base were created in participatory design with academic diabetes educators using knowledge acquisition methods. The knowledge base was validated using scenario-based approach with practicing diabetes educators and individuals with diabetes recruited from Community Health Centers (CHCs) serving economically disadvantaged communities and ethnic minorities in New York. The knowledge base includes eight glycemic control problems, over 150 behaviors known to contribute to these problems coupled with contextual explanations, and over 200 specific action-oriented self-management goals for correcting problematic behaviors, with corresponding motivational messages. The validation of the knowledge base suggested high level of completeness and accuracy, and identified improvements in cultural appropriateness. These were addressed in new iterations of the knowledge base. The resulting knowledge base is theoretically grounded, incorporates practical and evidence-based knowledge used by diabetes educators in practice settings, and allows for personally meaningful choices by individuals with diabetes. Participatory design approach helped researchers to capture implicit knowledge of practicing diabetes educators and make it explicit and reusable. The knowledge base proposed here is an important step towards development of new generation patient-centric decision support tools for facilitating chronic disease self-management. While this knowledge base specifically targets diabetes, its overall structure and composition can be generalized to other chronic conditions. Copyright © 2015 Elsevier Ireland Ltd. All rights reserved.

Participatory approach to the development of a knowledge base for problem-solving in diabetes self-management

PubMed Central

Cole-Lewis, Heather J.; Smaldone, Arlene M.; Davidson, Patricia R.; Kukafka, Rita; Tobin, Jonathan N.; Cassells, Andrea; Mynatt, Elizabeth D.; Hripcsak, George; Mamykina, Lena

2015-01-01

Objective To develop an expandable knowledge base of reusable knowledge related to self-management of diabetes that can be used as a foundation for patient-centric decision support tools. Materials and methods The structure and components of the knowledge base were created in participatory design with academic diabetes educators using knowledge acquisition methods. The knowledge base was validated using scenario-based approach with practicing diabetes educators and individuals with diabetes recruited from Community Health Centers (CHCs) serving economically disadvantaged communities and ethnic minorities in New York. Results The knowledge base includes eight glycemic control problems, over 150 behaviors known to contribute to these problems coupled with contextual explanations, and over 200 specific action-oriented self-management goals for correcting problematic behaviors, with corresponding motivational messages. The validation of the knowledge base suggested high level of completeness and accuracy, and identified improvements in cultural appropriateness. These were addressed in new iterations of the knowledge base. Discussion The resulting knowledge base is theoretically grounded, incorporates practical and evidence-based knowledge used by diabetes educators in practice settings, and allows for personally meaningful choices by individuals with diabetes. Participatory design approach helped researchers to capture implicit knowledge of practicing diabetes educators and make it explicit and reusable. Conclusion The knowledge base proposed here is an important step towards development of new generation patient-centric decision support tools for facilitating chronic disease self-management. While this knowledge base specifically targets diabetes, its overall structure and composition can be generalized to other chronic conditions. PMID:26547253

Designing Collaborative E-Learning Environments Based upon Semantic Wiki: From Design Models to Application Scenarios

ERIC Educational Resources Information Center

Li, Yanyan; Dong, Mingkai; Huang, Ronghuai

2011-01-01

The knowledge society requires life-long learning and flexible learning environment that enables fast, just-in-time and relevant learning, aiding the development of communities of knowledge, linking learners and practitioners with experts. Based upon semantic wiki, a combination of wiki and Semantic Web technology, this paper designs and develops…

A data structure and algorithm for fault diagnosis

NASA Technical Reports Server (NTRS)

Bosworth, Edward L., Jr.

1987-01-01

Results of preliminary research on the design of a knowledge based fault diagnosis system for use with on-orbit spacecraft such as the Hubble Space Telescope are presented. A candidate data structure and associated search algorithm from which the knowledge based system can evolve is discussed. This algorithmic approach will then be examined in view of its inability to diagnose certain common faults. From that critique, a design for the corresponding knowledge based system will be given.

Towards Methodologies for Building Knowledge-Based Instructional Systems.

ERIC Educational Resources Information Center

Duchastel, Philippe

1992-01-01

Examines the processes involved in building instructional systems that are based on artificial intelligence and hypermedia technologies. Traditional instructional systems design methodology is discussed; design issues including system architecture and learning strategies are addressed; and a new methodology for building knowledge-based…

Advanced software development workstation. Knowledge base design: Design of knowledge base for flight planning application

NASA Technical Reports Server (NTRS)

Izygon, Michel E.

1992-01-01

The development process of the knowledge base for the generation of Test Libraries for Mission Operations Computer (MOC) Command Support focused on a series of information gathering interviews. These knowledge capture sessions are supporting the development of a prototype for evaluating the capabilities of INTUIT on such an application. the prototype includes functions related to POCC (Payload Operation Control Center) processing. It prompts the end-users for input through a series of panels and then generates the Meds associated with the initialization and the update of hazardous command tables for a POCC Processing TLIB.

Design and Implementation of an Interface Editor for the Amadeus Multi- Relational Database Front-end System

DTIC Science & Technology

1993-03-25

application of Object-Oriented Programming (OOP) and Human-Computer Interface (HCI) design principles. Knowledge gained from each topic has been incorporated...through the ap- plication of Object-Oriented Programming (OOP) and Human-Computer Interface (HCI) design principles. Knowledge gained from each topic has...programming and Human-Computer Interface (HCI) design. Knowledge gained from each is applied to the design of a Form-based interface for database data

A low-cost multichannel wireless neural stimulation system for freely roaming animals.

PubMed

Alam, Monzurul; Chen, Xi; Fernandez, Eduardo

2013-12-01

Electrical stimulation of nerve tissue and recording of neural activity are the basis of many therapies and neural prostheses. Conventional stimulation systems have a number of practical limitations, especially in experiments involving freely roaming subjects. Our main objective was to develop a modular, versatile and inexpensive multichannel wireless system able to overcome some of these constraints. We have designed and implemented a new multichannel wireless neural stimulator based on commercial components. The system is small (2 cm × 4 cm × 0.5 cm) and light in weight (9 g) which allows it to be easily carried in a small backpack. To test and validate the performance and reliability of the whole system we conducted several bench tests and in vivo experiments. The performance and accuracy of the stimulator were comparable to commercial threaded systems. Stimulation sequences can be constructed on-the-fly with 251 selectable current levels (from 0 to 250 µA) with 1 µA step resolution. The pulse widths and intervals can be as long as 65 ms in 2 µs time resolution. The system covers approximately 10 m of transmission range in a regular laboratory environment and 100 m in free space (line of sight). Furthermore it provides great flexibility for experiments since it allows full control of the stimulator and the stimulation parameters in real time. When there is no stimulation, the device automatically goes into low-power sleep mode to preserve battery power. We introduce the design of a powerful multichannel wireless stimulator assembled from commercial components. Key features of the system are their reliability, robustness and small size. The system has a flexible design that can be modified straightforwardly to tailor it to any specific experimental need. Furthermore it can be effortlessly adapted for use with any kind of multielectrode arrays.

Operator assistant systems - An experimental approach using a telerobotics application

NASA Technical Reports Server (NTRS)

Boy, Guy A.; Mathe, Nathalie

1993-01-01

This article presents a knowledge-based system methodology for developing operator assistant (OA) systems in dynamic and interactive environments. This is a problem both of training and design, which is the subject of this article. Design includes both design of the system to be controlled and design of procedures for operating this system. A specific knowledge representation is proposed for representing the corresponding system and operational knowledge. This representation is based on the situation recognition and analytical reasoning paradigm. It tries to make explicit common factors involved in both human and machine intelligence, including perception and reasoning. An OA system based on this representation has been developed for space telerobotics. Simulations have been carried out with astronauts and the resulting protocols have been analyzed. Results show the relevance of the approach and have been used for improving the knowledge representation and the OA architecture.

Dutch Research on Knowledge-Based Instructional Systems: Introduction to the Special Issue.

ERIC Educational Resources Information Center

van Merrienboer, Jeroen J. G.

1994-01-01

Provides an overview of this issue that reviews Dutch research concerning knowledge-based instructional systems. Topics discussed include experimental research, conceptual models, design considerations, and guidelines; the design of student diagnostic modules, instructional modules, and interface modules; second-language teaching; intelligent…

Theory and ontology for sharing temporal knowledge

NASA Technical Reports Server (NTRS)

Loganantharaj, Rasiah

1996-01-01

Using current technology, the sharing or re-using of knowledge-bases is very difficult, if not impossible. ARPA has correctly recognized the problem and funded a knowledge sharing initiative. One of the outcomes of this project is a formal language called Knowledge Interchange Format (KIF) for representing knowledge that could be translated into other languages. Capturing and representing design knowledge and reasoning with them have become very important for NASA who is a pioneer of innovative design of unique products. For upgrading an existing design for changing technology, needs, or requirements, it is essential to understand the design rationale, design choices, options and other relevant information associated with the design. Capturing such information and presenting them in the appropriate form are part of the ongoing Design Knowledge Capture project of NASA. The behavior of an object and various other aspects related to time are captured by the appropriate temporal knowledge. The captured design knowledge will be represented in such a way that various groups of NASA who are interested in various aspects of the design cycle should be able to access and use the design knowledge effectively. To facilitate knowledge sharing among these groups, one has to develop a very well defined ontology. Ontology is a specification of conceptualization. In the literature several specific domains were studied and some well defined ontologies were developed for such domains. However, very little, or no work has been done in the area of representing temporal knowledge to facilitate sharing. During the ASEE summer program, I have investigated several temporal models and have proposed a theory for time that is flexible to accommodate the time elements, such as, points and intervals, and is capable of handling the qualitative and quantitative temporal constraints. I have also proposed a primitive temporal ontology using which other relevant temporal ontologies can be built. I have investigated various issues of sharing knowledge and have proposed a formal framework for modeling the concept of knowledge sharing. This work may be implemented and tested in the software environment supplied by Knowledge Based System, Inc.

Knowledge-based machine indexing from natural language text: Knowledge base design, development, and maintenance

NASA Technical Reports Server (NTRS)

Genuardi, Michael T.

1993-01-01

One strategy for machine-aided indexing (MAI) is to provide a concept-level analysis of the textual elements of documents or document abstracts. In such systems, natural-language phrases are analyzed in order to identify and classify concepts related to a particular subject domain. The overall performance of these MAI systems is largely dependent on the quality and comprehensiveness of their knowledge bases. These knowledge bases function to (1) define the relations between a controlled indexing vocabulary and natural language expressions; (2) provide a simple mechanism for disambiguation and the determination of relevancy; and (3) allow the extension of concept-hierarchical structure to all elements of the knowledge file. After a brief description of the NASA Machine-Aided Indexing system, concerns related to the development and maintenance of MAI knowledge bases are discussed. Particular emphasis is given to statistically-based text analysis tools designed to aid the knowledge base developer. One such tool, the Knowledge Base Building (KBB) program, presents the domain expert with a well-filtered list of synonyms and conceptually-related phrases for each thesaurus concept. Another tool, the Knowledge Base Maintenance (KBM) program, functions to identify areas of the knowledge base affected by changes in the conceptual domain (for example, the addition of a new thesaurus term). An alternate use of the KBM as an aid in thesaurus construction is also discussed.

Knowledge-Based Instructional Gaming: GEO.

ERIC Educational Resources Information Center

Duchastel, Philip

1989-01-01

Describes the design and development of an instructional game, GEO, in which the user learns elements of Canadian geography. The use of knowledge-based artificial intelligence techniques is discussed, the use of HyperCard in the design of GEO is explained, and future directions are suggested. (15 references) (Author/LRW)

Effects of Gender, Load, and Backpack on Easy Standing and Vertical Jump Performance. Volume 2

DTIC Science & Technology

1982-03-01

D BY RICHARD C. NELSON AND PHILIP E. MARTIN BIOMECHANICS LABORATORY THE PENNSYLVANIA STATE UNIVERSITY UNIVERSITY PARK, PENNSYLVANIA MARCH...PERFORMING ORGANIZATION NAME AND ADDRESS Biomechanics Laboratory The Pennsylvania State University University Park. Pennsylvania 16802 10. PROGRAM...REFERENCES APPENDICES A. Clothing and Equipment Used in This Study B. ANOVA Summary Tables for Easy Standing C. ANOVA Summary Tables for

Putting an End to the Battle over Homework.

ERIC Educational Resources Information Center

Lacina-Gifford, Lorna J.; Gifford, Russell B.

2004-01-01

You would think that the sound of school bells ringing out in dismissal would be a happy one to the ears of students anxious to go home after a long day in classes, but many are finding the work is just beginning after the final bell. Homework may be nothing new, but lately the vast amounts coming home in the book bags and backpacks of students of…

Textbooks of the Future: It's Time the Textbook Industry Redefined What They Do and How They Do It

ERIC Educational Resources Information Center

Warlick, David

2004-01-01

That students will eventually use computers in place of traditional textbooks is almost certain. Just watch the eight-year-old children at your local elementary school pulling their backpacks (now on wheels). Will the digital textbook become more than a CD-ROM of the print version? First, like most other education technologies, it will be an…

Ambulant Measurements of Physiological Status and Cognitive Performance during Sustained Operations

DTIC Science & Technology

2009-10-01

the target, reaction time, illegal responses, and missed responses were recorded. 2.4 Physiological measurements 2.4.1 Anthropometry ...system (SPi-Elite, GPsports Australia ) was mounted on the soldiers’ backpack. The system measured continuously during the training weeks. Walking or...the percentage missed stimuli were even more alike. 3.3 Physiological measurements 3.3.1 Anthropometry The soldiers who completed the training

GEMINI-TITAN (GT)-9 - MOCKUP - ADAPTER EQUIPMENT SECTION - FUEL CELL - MSC

NASA Image and Video Library

1966-03-01

S66-22686 (March 1966) --- Mock-up of the adapter equipment section to be used on the Gemini-9 spaceflight. This section provides volume and attach points for several system modules, including Orbit Attitude Maneuver System, Environmental Control System primary oxygen supply, batteries, coolant, and electrical and electric components. This section will also hold the Astronaut Maneuvering Unit (AMU) backpack (center). Photo credit: NASA

Expert knowledge maps for knowledge management: a case study in Traditional Chinese Medicine research.

PubMed

Cui, Meng; Yang, Shuo; Yu, Tong; Yang, Ce; Gao, Yonghong; Zhu, Haiyan

2013-10-01

To design a model to capture information on the state and trends of knowledge creation, at both an individual and an organizational level, in order to enhance knowledge management. We designed a graph-theoretic knowledge model, the expert knowledge map (EKM), based on literature-based annotation. A case study in the domain of Traditional Chinese Medicine research was used to illustrate the usefulness of the model. The EKM successfully captured various aspects of knowledge and enhanced knowledge management within the case-study organization through the provision of knowledge graphs, expert graphs, and expert-knowledge biography. Our model could help to reveal the hot topics, trends, and products of the research done by an organization. It can potentially be used to facilitate knowledge learning, sharing and decision-making among researchers, academicians, students, and administrators of organizations.

[Effects of physical factors on neck or shoulder pain and low back pain of adolescents].

PubMed

Deng, Guoying; Zhang, Yongxing; Cai, Haifeng; Gu, Wentao; Cai, Yun; Xie, Lei; Liu, Bo; Li, Jipeng; Li, Siyu; Cheng, Dantong; Zhao, Qinghua

2014-11-25

To explore the incidence of self-reported neck or shoulder pain (NSP) and lower back pain (LBP) among Chinese adolescents in Shanghai and identify the influencing factors for the incidences of NSP and LBP. A total of 3 600 students were selected from 30 high schools randomly chosen from 237 regular full-time high schools registered in Shanghai. From each school, 40 students were selected from each of the tenth, eleventh and twelfth grades for a total of 120 students per school. The questionnaire involved questions pertaining to demographic profiles, learning environment and exercise habits of each student. And it also contained questions regarding the amount of weight carried by each student while commuting to and from school, and it was also used to collect specific information related to the occurrence of NSP and LBP. Logistic regression was performed to analyze the potential risk factors for NSP and LBP. Among 3 600 questionnaires, a total of 2 842 valid ones were returned. The results revealed that the incidence of NSP and LBP in the Chinese adolescent population was 41.1% and 32.8% respectively. Both NSP and LBP were more common in girls than in boys, and 6.3% students reported at least one NSP- or LBP-induced absence from school. A relatively large portion of Chinese adolescents reported experiencing problems such as sedentary behavior (26.7% of the students continued to sit for more than 3 hours after school), a lack of exercise (29.3% exercised less than once each week and 38.2% of students reported that their exercise duration was less than half an hour each time) and overweight backpacks (53.0% complained that their backpack was too heavy). Multivariate logistic regression analysis revealed that gender, grade, physical activity and learning environment were all significantly correlated with the occurrences of NSP and LBP. The incidences of NSP and LBP are relatively high among adolescents in Shanghai. And several factors, including sedentary behavior, personal exercise habits and backpack weight, influence the occurrences of NSP and LBP in adolesents.

A knowledge-based approach to automated flow-field zoning for computational fluid dynamics

NASA Technical Reports Server (NTRS)

Vogel, Alison Andrews

1989-01-01

An automated three-dimensional zonal grid generation capability for computational fluid dynamics is shown through the development of a demonstration computer program capable of automatically zoning the flow field of representative two-dimensional (2-D) aerodynamic configurations. The applicability of a knowledge-based programming approach to the domain of flow-field zoning is examined. Several aspects of flow-field zoning make the application of knowledge-based techniques challenging: the need for perceptual information, the role of individual bias in the design and evaluation of zonings, and the fact that the zoning process is modeled as a constructive, design-type task (for which there are relatively few examples of successful knowledge-based systems in any domain). Engineering solutions to the problems arising from these aspects are developed, and a demonstration system is implemented which can design, generate, and output flow-field zonings for representative 2-D aerodynamic configurations.

Evaluation in the Design of Complex Systems

ERIC Educational Resources Information Center

Ho, Li-An; Schwen, Thomas M.

2006-01-01

We identify literature that argues the process of creating knowledge-based system is often imbalanced. In most knowledge-based systems, development is often technology-driven instead of requirement-driven. Therefore, we argue designers must recognize that evaluation is a critical link in the application of requirement-driven development models…

Perspectives on knowledge in engineering design

NASA Technical Reports Server (NTRS)

Rasdorf, W. J.

1985-01-01

Various perspectives are given of the knowledge currently used in engineering design, specifically dealing with knowledge-based expert systems (KBES). Constructing an expert system often reveals inconsistencies in domain knowledge while formalizing it. The types of domain knowledge (facts, procedures, judgments, and control) differ from the classes of that knowledge (creative, innovative, and routine). The feasible tasks for expert systems can be determined based on these types and classes of knowledge. Interpretive tasks require reasoning about a task in light of the knowledge available, where generative tasks create potential solutions to be tested against constraints. Only after classifying the domain by type and level can the engineer select a knowledge-engineering tool for the domain being considered. The critical features to be weighed after classification are knowledge representation techniques, control strategies, interface requirements, compatibility with traditional systems, and economic considerations.

The Sydney West Knowledge Portal: Evaluating the Growth of a Knowledge Portal to Support Translational Research.

PubMed

Janssen, Anna; Robinson, Tracy Elizabeth; Provan, Pamela; Shaw, Tim

2016-06-29

The Sydney West Translational Cancer Research Centre is an organization funded to build capacity for translational research in cancer. Translational research is essential for ensuring the integration of best available evidence into practice and for improving patient outcomes. However, there is a low level of awareness regarding what it is and how to conduct it optimally. One solution to addressing this gap is the design and deployment of web-based knowledge portals to disseminate new knowledge and engage with and connect dispersed networks of researchers. A knowledge portal is an web-based platform for increasing knowledge dissemination and management in a specialized area. To measure the design and growth of an web-based knowledge portal for increasing individual awareness of translational research and to build organizational capacity for the delivery of translational research projects in cancer. An adaptive methodology was used to capture the design and growth of an web-based knowledge portal in cancer. This involved stakeholder consultations to inform initial design of the portal. Once the portal was live, site analytics were reviewed to evaluate member usage of the portal and to measure growth in membership. Knowledge portal membership grew consistently for the first 18 months after deployment, before leveling out. Analysis of site metrics revealed members were most likely to visit portal pages with community-generated content, particularly pages with a focus on translational research. This was closely followed by pages that disseminated educational material about translational research. Preliminary data from this study suggest that knowledge portals may be beneficial tools for translating new evidence and fostering an environment of communication and collaboration.

The Sydney West Knowledge Portal: Evaluating the Growth of a Knowledge Portal to Support Translational Research

PubMed Central

2016-01-01

Background The Sydney West Translational Cancer Research Centre is an organization funded to build capacity for translational research in cancer. Translational research is essential for ensuring the integration of best available evidence into practice and for improving patient outcomes. However, there is a low level of awareness regarding what it is and how to conduct it optimally. One solution to addressing this gap is the design and deployment of web-based knowledge portals to disseminate new knowledge and engage with and connect dispersed networks of researchers. A knowledge portal is an web-based platform for increasing knowledge dissemination and management in a specialized area. Objective To measure the design and growth of an web-based knowledge portal for increasing individual awareness of translational research and to build organizational capacity for the delivery of translational research projects in cancer. Methods An adaptive methodology was used to capture the design and growth of an web-based knowledge portal in cancer. This involved stakeholder consultations to inform initial design of the portal. Once the portal was live, site analytics were reviewed to evaluate member usage of the portal and to measure growth in membership. Results Knowledge portal membership grew consistently for the first 18 months after deployment, before leveling out. Analysis of site metrics revealed members were most likely to visit portal pages with community-generated content, particularly pages with a focus on translational research. This was closely followed by pages that disseminated educational material about translational research. Conclusions Preliminary data from this study suggest that knowledge portals may be beneficial tools for translating new evidence and fostering an environment of communication and collaboration. PMID:27357641

The structural approach to shared knowledge: an application to engineering design teams.

PubMed

Avnet, Mark S; Weigel, Annalisa L

2013-06-01

We propose a methodology for analyzing shared knowledge in engineering design teams. Whereas prior work has focused on shared knowledge in small teams at a specific point in time, the model presented here is both scalable and dynamic. By quantifying team members' common views of design drivers, we build a network of shared mental models to reveal the structure of shared knowledge at a snapshot in time. Based on a structural comparison of networks at different points in time, a metric of change in shared knowledge is computed. Analysis of survey data from 12 conceptual space mission design sessions reveals a correlation between change in shared knowledge and each of several system attributes, including system development time, system mass, and technological maturity. From these results, we conclude that an early period of learning and consensus building could be beneficial to the design of engineered systems. Although we do not examine team performance directly, we demonstrate that shared knowledge is related to the technical design and thus provide a foundation for improving design products by incorporating the knowledge and thoughts of the engineering design team into the process.

Automating the design of scientific computing software

NASA Technical Reports Server (NTRS)

Kant, Elaine

1992-01-01

SINAPSE is a domain-specific software design system that generates code from specifications of equations and algorithm methods. This paper describes the system's design techniques (planning in a space of knowledge-based refinement and optimization rules), user interaction style (user has option to control decision making), and representation of knowledge (rules and objects). It also summarizes how the system knowledge has evolved over time and suggests some issues in building software design systems to facilitate reuse.

A Comparison of Books and Hypermedia for Knowledge-based Sports Coaching.

ERIC Educational Resources Information Center

Vickers, Joan N.; Gaines, Brian R.

1988-01-01

Summarizes and illustrates the knowledge-based approach to instructional material design. A series of sports coaching handbooks and hypermedia presentations of the same material are described and the different instantiations of the knowledge and training structures are compared. Figures show knowledge structures for badminton and the architecture…

Using Teachers' Inquiry-Oriented Curriculum Materials as a Means to Examine Their Pedagogical Design Capacity and Pedagogical Content Knowledge for Inquiry-Based Learning

ERIC Educational Resources Information Center

Papaevripidou, Marios; Irakleous, Maria; Zacharia, Zacharias C.

2017-01-01

The study aimed at examining preservice elementary teachers' inquiry-oriented curriculum materials in an attempt to unravel their pedagogical design capacity (PDC) and pedagogical content knowledge (PCK) for inquiry-based learning (IBL), after attending a professional development program (PDP) centered around inquiry-based teaching and learning.…

Design and Analysis Techniques for Concurrent Blackboard Systems. Ph.D. Thesis

NASA Technical Reports Server (NTRS)

Mcmanus, John William

1992-01-01

Blackboard systems are a natural progression of knowledge-based systems into a more powerful problem solving technique. They provide a way for several highly specialized knowledge sources to cooperate to solve large, complex problems. Blackboard systems incorporate the concepts developed by rule-based and expert systems programmers and include the ability to add conventionally coded knowledge sources. The small and specialized knowledge sources are easier to develop and test, and can be hosted on hardware specifically suited to the task that they are solving. The Formal Model for Blackboard Systems was developed to provide a consistent method for describing a blackboard system. A set of blackboard system design tools has been developed and validated for implementing systems that are expressed using the Formal Model. The tools are used to test and refine a proposed blackboard system design before the design is implemented. My research has shown that the level of independence and specialization of the knowledge sources directly affects the performance of blackboard systems. Using the design, simulation, and analysis tools, I developed a concurrent object-oriented blackboard system that is faster, more efficient, and more powerful than existing systems. The use of the design and analysis tools provided the highly specialized and independent knowledge sources required for my concurrent blackboard system to achieve its design goals.

PDA: A coupling of knowledge and memory for case-based reasoning

NASA Technical Reports Server (NTRS)

Bharwani, S.; Walls, J.; Blevins, E.

1988-01-01

Problem solving in most domains requires reference to past knowledge and experience whether such knowledge is represented as rules, decision trees, networks or any variant of attributed graphs. Regardless of the representational form employed, designers of expert systems rarely make a distinction between the static and dynamic aspects of the system's knowledge base. The current paper clearly distinguishes between knowledge-based and memory-based reasoning where the former in its most pure sense is characterized by a static knowledge based resulting in a relatively brittle expert system while the latter is dynamic and analogous to the functions of human memory which learns from experience. The paper discusses the design of an advisory system which combines a knowledge base consisting of domain vocabulary and default dependencies between concepts with a dynamic conceptual memory which stores experimental knowledge in the form of cases. The case memory organizes past experience in the form of MOPs (memory organization packets) and sub-MOPs. Each MOP consists of a context frame and a set of indices. The context frame contains information about the features (norms) common to all the events and sub-MOPs indexed under it.

Communicating Leave No Trace ethics and practices: Efficacy of two-day trainer courses

USGS Publications Warehouse

Daniels, M.L.; Marion, J.L.

2005-01-01

Heavy recreational visitation within protected natural areas has resulted in many ecological impacts. Many of these impacts may be avoided or minimized through adoption of low-impact hiking and camping practices. Although ?No Trace? messages have been promoted in public lands since the 1970s, few studies have documented the reception and effectiveness of these messages. The U.S. Leave No Trace Center for Outdoor Ethics develops and promotes two-day Trainer courses that teach Leave No Trace (LNT) skills and ethics to outdoor professionals, groups, and interested individuals. This study examined the change in knowledge, ethics, and behavior of LNT Trainer course participants. The respondents were a convenience sample of participants in Trainer courses offered from April through August 2003. Trainer course instructors administered pre-course and post-course questionnaires to their participants, and we contacted participants individually with a followup questionnaire 4 months after completion of their course. Scores for each of the sections increased immediately following the course, and decreased slightly over the 4 months following the course. Overall, more than half of the knowledge and behavior items, and half of the ethics items, showed significant improvement from pre-course measures to the follow-up. Age, reported LNT experience, and backpacking experience affected the participants? pre-course knowledge and behavior scores. Younger, less experienced respondents also showed a greater improvement in behavior following the course. Trainer course participants also shared their LNT skills and ethics with others both formally and informally. In summary, the LNT Trainer course was successful in increasing participants? knowledge, ethics, and behavior, which they then shared with others. Since many low impact skills taught in the LNT curriculum are supported by scientific research, LNT educational programs have the potential to effectively minimize the environmental impacts caused by outdoor recreationists. Research implications for improving LNT training and instruction are described.

Knowledge Interaction Design for Creative Knowledge Work

NASA Astrophysics Data System (ADS)

Nakakoji, Kumiyo; Yamamoto, Yasuhiro

This paper describes our approach for the development of application systems for creative knowledge work, particularly for early stages of information design tasks. Being a cognitive tool serving as a means of externalization, an application system affects how the user is engaged in the creative process through its visual interaction design. Knowledge interaction design described in this paper is a framework where a set of application systems for different information design domains are developed based on an interaction model, which is designed for a particular model of a thinking process. We have developed two sets of application systems using the knowledge interaction design framework: one includes systems for linear information design, such as writing, movie-editing, and video-analysis; the other includes systems for network information design, such as file-system navigation and hypertext authoring. Our experience shows that the resulting systems encourage users to follow a certain cognitive path through graceful user experience.

KBGIS-2: A knowledge-based geographic information system

NASA Technical Reports Server (NTRS)

Smith, T.; Peuquet, D.; Menon, S.; Agarwal, P.

1986-01-01

The architecture and working of a recently implemented knowledge-based geographic information system (KBGIS-2) that was designed to satisfy several general criteria for the geographic information system are described. The system has four major functions that include query-answering, learning, and editing. The main query finds constrained locations for spatial objects that are describable in a predicate-calculus based spatial objects language. The main search procedures include a family of constraint-satisfaction procedures that use a spatial object knowledge base to search efficiently for complex spatial objects in large, multilayered spatial data bases. These data bases are represented in quadtree form. The search strategy is designed to reduce the computational cost of search in the average case. The learning capabilities of the system include the addition of new locations of complex spatial objects to the knowledge base as queries are answered, and the ability to learn inductively definitions of new spatial objects from examples. The new definitions are added to the knowledge base by the system. The system is currently performing all its designated tasks successfully, although currently implemented on inadequate hardware. Future reports will detail the performance characteristics of the system, and various new extensions are planned in order to enhance the power of KBGIS-2.

Technological Pedagogical Content Knowledge Development: Integrating Technology with a Research Teaching Perspective

ERIC Educational Resources Information Center

Guerra, Cecilia; Moreira, Antonio; Vieira, Rui

2017-01-01

Technological Pedagogical Content Knowledge (TPCK) represents the teachers' professional knowledge needed to integrate technology in education. Following a design-based approach this study describes the strategies for designing and assessing an in-service science teacher education course. Data was obtained through interviews, questionnaires, using…

Automated knowledge generation

NASA Technical Reports Server (NTRS)

Myler, Harley R.; Gonzalez, Avelino J.

1988-01-01

The general objectives of the NASA/UCF Automated Knowledge Generation Project were the development of an intelligent software system that could access CAD design data bases, interpret them, and generate a diagnostic knowledge base in the form of a system model. The initial area of concentration is in the diagnosis of the process control system using the Knowledge-based Autonomous Test Engineer (KATE) diagnostic system. A secondary objective was the study of general problems of automated knowledge generation. A prototype was developed, based on object-oriented language (Flavors).

The Hopper: A Wearable Robotic Device Testbed for Micro-Gravity Bone-Loading Proof-of-Concept

NASA Technical Reports Server (NTRS)

Beck, C. E.; Rovekamp, R. N.; Neuhaus, P. D.

2015-01-01

Wearable robotic systems are showing increased potential for addressing crew countermeasures needs. Wearable robots offer a compactness, programmability, and eccentric loading capability not present in more conventional exercise equipment. Correspondingly, advancements in the man to machine interface has progressed, allowing for higher loads to be applied directly to the person in new and novel ways. Recently, the X1 exoskeleton, a lower extremity wearable robot originally designed for mobility assistance and rehabilitation, underwent human subject testing to assess its potential as a knee dynamometer. This was of interest to NASA physiologists because currently strength is not assessed in flight due to hardware limitations, and thus there is a poor understanding of the time course of in-flight changes to muscle strength. The study concluded that the X1 compared well with the Biodex, the "gold standard" in terrestrial dynamometry, with coefficients of variation less than 6.0%. In a following study, the X1 powered ankle was evaluated for its efficacy in exercising calf muscles. Current on-orbit countermeasures equipment does not adequately protect the calf from atrophy. The results of this study were also positive (targeted muscle activity demonstrated via comparing pre- and post-exercise magnetic resonance imaging T2 measurements), again showing the efficacy of wearable robotic devices for addressing the countermeasure needs of our astronauts. Based on these successes and lessons learned, the Grasshopper was co-developed between IHMC (Florida Institute for Human and Machine Cognition) and NASA. The Grasshopper, or the Hopper for short, is a wearable robotic device designed to address muscle and bone density loss for astronauts spending extended periods of time in micro-gravity. The Grasshopper connects to the user's torso like a hiking backpack, over the shoulders and around the waist. At the feet are footplates that strap to the user. There are two actuators, one at each "knee" joint, which are capable of high fidelity torque control. Because the Hopper uses motors instead of gravity to create the load on the user, the device is suited for use on space missions. Exercise in zero-gravity conditions is critical to maintain muscle strength and bone mass. In operation, the actuators try to fold up, or collapse, the device, putting a compressive load between the user's feet and torso. This force is similar to carrying a heavy backpack. The user then bends and extends his or her knees, replicating a weightlifting squat exercise. The applied load is precisely controlled by a computer, and can be programmed to simulate gravitation loads or any desired load prescription, such as free-weight squat exercise. It is even possible to perform eccentric exercises, or negatives, without the need for a spotter. Because the hip joints, as well as the spine and long leg bones, are in the applied load path, there is the potential to stimulate bone growth, countering the typical bone loss when astronauts return from extended duration space travel.

A concept ideation framework for medical device design.

PubMed

Hagedorn, Thomas J; Grosse, Ian R; Krishnamurty, Sundar

2015-06-01

Medical device design is a challenging process, often requiring collaboration between medical and engineering domain experts. This collaboration can be best institutionalized through systematic knowledge transfer between the two domains coupled with effective knowledge management throughout the design innovation process. Toward this goal, we present the development of a semantic framework for medical device design that unifies a large medical ontology with detailed engineering functional models along with the repository of design innovation information contained in the US Patent Database. As part of our development, existing medical, engineering, and patent document ontologies were modified and interlinked to create a comprehensive medical device innovation and design tool with appropriate properties and semantic relations to facilitate knowledge capture, enrich existing knowledge, and enable effective knowledge reuse for different scenarios. The result is a Concept Ideation Framework for Medical Device Design (CIFMeDD). Key features of the resulting framework include function-based searching and automated inter-domain reasoning to uniquely enable identification of functionally similar procedures, tools, and inventions from multiple domains based on simple semantic searches. The significance and usefulness of the resulting framework for aiding in conceptual design and innovation in the medical realm are explored via two case studies examining medical device design problems. Copyright © 2015 Elsevier Inc. All rights reserved.

Bridging Professional Teacher Knowledge for Science and Literary Integration via Design-Based Research

ERIC Educational Resources Information Center

Fazio, Xavier; Gallagher, Tiffany L.

2018-01-01

We offer insights for using design-based research (DBR) as a model for constructing professional development that supports curriculum and instructional knowledge regarding science and literacy integration. We spotlight experiences in the DBR process from data collected from a sample of four elementary teachers. Findings from interviews, focus…

STRUTEX: A prototype knowledge-based system for initially configuring a structure to support point loads in two dimensions

NASA Technical Reports Server (NTRS)

Rogers, James L.; Feyock, Stefan; Sobieszczanski-Sobieski, Jaroslaw

1988-01-01

The purpose of this research effort is to investigate the benefits that might be derived from applying artificial intelligence tools in the area of conceptual design. Therefore, the emphasis is on the artificial intelligence aspects of conceptual design rather than structural and optimization aspects. A prototype knowledge-based system, called STRUTEX, was developed to initially configure a structure to support point loads in two dimensions. This system combines numerical and symbolic processing by the computer with interactive problem solving aided by the vision of the user by integrating a knowledge base interface and inference engine, a data base interface, and graphics while keeping the knowledge base and data base files separate. The system writes a file which can be input into a structural synthesis system, which combines structural analysis and optimization.

Aerospace Power Journal. Volume 15, Number 4, Winter 2001

DTIC Science & Technology

2001-01-01

other hand, a flood or hurricane may cause few surgical casualties but increase demand for emergency-room and public- health services as well as...the Defense Department. Overseas, these types of requests would come through the State Department, as they did after Hurricane Mitch struck...transportable hospital when a five-person, backpack-portable surgical team can provide the needed care. After hurricanes or floods, for example, one may have a

Effects of Gender, Frame Length, and Participation Time on Load Carrying Behavior

DTIC Science & Technology

1982-08-01

MARTIN RICHARD C. NELSON AND IN-SIK SHIN DHTI C BIOMECHANICS LABORATORY FLECTEMk THE PENNSYLVANIA STATE UNIVERSITY DEC 2 2 1982 ! W UNIVERSITY...ADDRESS Biomechanics Laboratory The Pennsylvania State University University Park, Pennsylvania 10. PROGRAM ELEMENT, PROJECT, TASK AREA & WORK...trousers, combat boots, a PASGT helmet, the ALICE fighting gear, and an ALICE backpack containing 20 lb of military clothing and equipment. The length of

Portable Dental System

NASA Technical Reports Server (NTRS)

1980-01-01

Portable dental system provides dental care in isolated communities. System includes a patient's chair and a dentist's stool, an X-ray machine and a power unit, all of which fold into compact packages. A large yellow "pumpkin" is a collapsible compressed air tank. Portable system has been used successfully in South America in out of the way communities with this back-packable system, and in American nursing homes. This product is no longer manufactured.

Sample Return Robot Centennial Challenge

NASA Image and Video Library

2012-06-16

"Harry" a Goldendoodle is seen wearing a NASA backpack during the Worcester Polytechnic Institute (WPI) "TouchTomorrow" education and outreach event that was held in tandem with the NASA-WPI Sample Return Robot Centennial Challenge on Saturday, June 16, 2012 in Worcester, Mass. The challenge tasked robotic teams to build autonomous robots that can identify, collect and return samples. NASA needs autonomous robotic capability for future planetary exploration. Photo Credit: (NASA/Bill Ingalls)

Lessons Learned From The EMU Fire and How It Impacts CxP Suit Element Development and Testing

NASA Technical Reports Server (NTRS)

Metts, Jonathan; Hill, Terry

2008-01-01

During testing a Space Shuttle Extravehicular Mobility Unit (EMU) pressure garment and life-support backpack was destroyed in a flash fire in the Johnson Space Center's Crew systems laboratory. This slide presentation reviews the accident, probable causes, the lessons learned and the effect this has on the testing and the environment for testing of the Space Suit for the Constellation Program.

Physiological Strain During Load Carrying: Effects of Mass and Type of Backpack

DTIC Science & Technology

2001-05-01

load did not significantly increase the EMG signal of the trapezius shoulder muscle (pars descenders). While walking, load carrying significantly...descending part of the right trapezius muscle was measured with two surface silver-silver chloride electrodes (PPG, Hellige), positioned on the distal...values using a previously determined RMS versus force relationship. This calibration curve between RMS of the EMG of the trapezius muscle and the force

Object Detection using the Kinect

DTIC Science & Technology

2012-03-01

Kinect camera and point cloud data from the Kinect’s structured light stereo system (figure 1). We obtain reasonable results using a single prototype...same manner we present in this report. For example, at Willow Garage , Steder uses a 3-D feature he developed to classify objects directly from point...detecting backpacks using the data available from the Kinect sensor. 4 3.1 Point Cloud Filtering Dense point clouds derived from stereo are notoriously

Loads Carried by Soldiers: Historical, Physiological, Biomechanical and Medical Aspects

DTIC Science & Technology

1989-06-01

EMG and cinematographic data in the study of load carriage. They showed that EMG activity of the trapezius, rectus femorls, gastrocnemus and erector... abdominal muscles. Backpack loads of 18 to 27 kg did not change the magnitude of this pressure while walking (45). MEDICAL ASPECTS RUCKSACK PARALYSIS...symptoms included minor pain , paresthesias, numbness and paralysis of the upper extremities. The shoulder girdle and elbow flexor muscle groups were usually

Increase in Leg Stiffness Reduces Joint Work During Backpack Carriage Running at Slow Velocities.

PubMed

Liew, Bernard; Netto, Kevin; Morris, Susan

2017-10-01

Optimal tuning of leg stiffness has been associated with better running economy. Running with a load is energetically expensive, which could have a significant impact on athletic performance where backpack carriage is involved. The purpose of this study was to investigate the impact of load magnitude and velocity on leg stiffness. We also explored the relationship between leg stiffness and running joint work. Thirty-one healthy participants ran overground at 3 velocities (3.0, 4.0, 5.0 m·s -1 ), whilst carrying 3 load magnitudes (0%, 10%, 20% weight). Leg stiffness was derived using the direct kinetic-kinematic method. Joint work data was previously reported in a separate study. Linear models were used to establish relationships between leg stiffness and load magnitude, velocity, and joint work. Our results found that leg stiffness did not increase with load magnitude. Increased leg stiffness was associated with reduced total joint work at 3.0 m·s -1 , but not at faster velocities. The association between leg stiffness and joint work at slower velocities could be due to an optimal covariation between skeletal and muscular components of leg stiffness, and limb attack angle. When running at a relatively comfortable velocity, greater leg stiffness may reflect a more energy efficient running pattern.

Knowledge representation to support reasoning based on multiple models

NASA Technical Reports Server (NTRS)

Gillam, April; Seidel, Jorge P.; Parker, Alice C.

1990-01-01

Model Based Reasoning is a powerful tool used to design and analyze systems, which are often composed of numerous interactive, interrelated subsystems. Models of the subsystems are written independently and may be used together while they are still under development. Thus the models are not static. They evolve as information becomes obsolete, as improved artifact descriptions are developed, and as system capabilities change. Researchers are using three methods to support knowledge/data base growth, to track the model evolution, and to handle knowledge from diverse domains. First, the representation methodology is based on having pools, or types, of knowledge from which each model is constructed. In addition information is explicit. This includes the interactions between components, the description of the artifact structure, and the constraints and limitations of the models. The third principle we have followed is the separation of the data and knowledge from the inferencing and equation solving mechanisms. This methodology is used in two distinct knowledge-based systems: one for the design of space systems and another for the synthesis of VLSI circuits. It has facilitated the growth and evolution of our models, made accountability of results explicit, and provided credibility for the user community. These capabilities have been implemented and are being used in actual design projects.

Improvement of sand filter and constructed wetland design using an environmental decision support system.

PubMed

Turon, Clàudia; Comas, Joaquim; Torrens, Antonina; Molle, Pascal; Poch, Manel

2008-01-01

With the aim of improving effluent quality of waste stabilization ponds, different designs of vertical flow constructed wetlands and intermittent sand filters were tested on an experimental full-scale plant within the framework of a European project. The information extracted from this study was completed and updated with heuristic and bibliographic knowledge. The data and knowledge acquired were difficult to integrate into mathematical models because they involve qualitative information and expert reasoning. Therefore, it was decided to develop an environmental decision support system (EDSS-Filter-Design) as a tool to integrate mathematical models and knowledge-based techniques. This paper describes the development of this support tool, emphasizing the collection of data and knowledge and representation of this information by means of mathematical equations and a rule-based system. The developed support tool provides the main design characteristics of filters: (i) required surface, (ii) media type, and (iii) media depth. These design recommendations are based on wastewater characteristics, applied load, and required treatment level data provided by the user. The results of the EDSS-Filter-Design provide appropriate and useful information and guidelines on how to design filters, according to the expert criteria. The encapsulation of the information into a decision support system reduces the design period and provides a feasible, reasoned, and positively evaluated proposal.

Knowledge Sharing in an American Multinational Company Based in Malaysia

ERIC Educational Resources Information Center

Ling, Chen Wai; Sandhu, Manjit S.; Jain, Kamal Kishore

2009-01-01

Purpose: This paper seeks to examine the views of executives working in an American based multinational company (MNC) about knowledge sharing, barriers to knowledge sharing, and strategies to promote knowledge sharing. Design/methodology/approach: This study was carried out in phases. In the first phase, a topology of organizational mechanisms for…

Fluid Dynamics of Small, Rugged Vacuum Pumps of Viscous-Drag Type

NASA Technical Reports Server (NTRS)

Russell, John M.

2002-01-01

The need to identify spikes in the concentration of hazardous gases during countdowns to space shuttle launches has led Kennedy Space Center to acquire considerable expertise in the design, construction, and operation of special-purpose gas analyzers of mass-spectrometer type. If such devices could be miniaturized so as to fit in a small airborne package or backpack them their potential applications would include integrated vehicle health monitoring in later-generation space shuttles and in hazardous material detection in airports, to name two examples. The bulkiest components of such devices are vacuum pumps, particularly those that function in the low vacuum range. Now some pumps that operate in the high vacuum range (e.g. molecular-drag and turbomolecular pumps) are already small and rugged. The present work aims to determine whether, on physical grounds, one may or may not adopt the molecular-drag principle to the low-vacuum range (in which case viscous-drag principle is the appropriate term). The deliverable of the present effort is the derivation and justification of some key formulas and calculation methods for the preliminary design of a single-spool, spiral-channel viscous-drag pump.

Instructional Design as Knowledge Management: A Knowledge-in-Practice Approach to Choosing Instructional Methods

ERIC Educational Resources Information Center

McIver, Derrick; Fitzsimmons, Stacey; Flanagan, David

2016-01-01

Decisions about instructional methods are becoming more complex, with options ranging from problem sets to experiential service-learning projects. However, instructors not trained in instructional design may make these important decisions based on convenience, comfort, or trends. Instead, this article draws on the knowledge management literature…

Assessment of Teachers' Reactions to a Knowledge- and Skills-Based Pay Structure at an International School

ERIC Educational Resources Information Center

Lowe, Joel Courtney

2013-01-01

This study explores teachers' reactions to a knowledge- and skills-based pay (KSBP) system implemented in a large international school. Such systems are designed to set teacher compensation based on demonstrated professional knowledge and skills as opposed to the traditional scale based on years of experience and degrees attained. This study fills…

A knowledge-based design for assemble system for vehicle seat

NASA Astrophysics Data System (ADS)

Wahidin, L. S.; Tan, CheeFai; Khalil, S. N.; Juffrizal, K.; Nidzamuddin, M. Y.

2015-05-01

Companies worldwide are striving to reduce the costs of their products to impact their bottom line profitability. When it comes to improving profits, there are in two choices: sell more or cut the cost of what is currently being sold. Given the depressed economy of the last several years, the "sell more" option, in many cases, has been taken off the table. As a result, cost cutting is often the most effective path. One of the industrial challenges is to search for the shorten product development and lower manufacturing cost especially in the early stage of designing the product. Knowledge-based system is used to assist the industry when the expert is not available and to keep the expertise within the company. The application of knowledge-based system will enable the standardization and accuracy of the assembly process. For this purpose, a knowledge-based design for assemble system is developed to assist the industry to plan the assembly process of the vehicle seat.

A Technological Pedagogical Content Knowledge Based Instructional Design Model: A Third Version Implementation Study in a Technology Integration Course

ERIC Educational Resources Information Center

Lee, Chia-Jung; Kim, ChanMin

2017-01-01

This paper presents the third version of a technological pedagogical content knowledge (TPACK) based instructional design model that incorporates the distinctive, transformative, and integrative views of TPACK into a comprehensive actionable framework. Strategies of relating TPACK domains to real-life learning experiences, role-playing, and…

Developing a Framework for Social Technologies in Learning via Design-Based Research

ERIC Educational Resources Information Center

Parmaxi, Antigoni; Zaphiris, Panayiotis

2015-01-01

This paper reports on the use of design-based research (DBR) for the development of a framework that grounds the use of social technologies in learning. The paper focuses on three studies which step on the learning theory of constructionism. Constructionism assumes that knowledge is better gained when students find this knowledge for themselves…

The Impact of New Learning Environments in an Engineering Design Course

ERIC Educational Resources Information Center

Dinsmore, Daniel L.; Alexander, Patricia A.; Loughlin, Sandra M.

2008-01-01

In this study, we investigated the effects of students' participation in a collaborative, project-based engineering design course on their domain knowledge, interests, and strategic processing. Participants were 70 college seniors working in teams on a design project of their choosing. Their declarative, procedural, and principled knowledge, along…

The Visual Representation and Acquisition of Driving Knowledge for Autonomous Vehicle

NASA Astrophysics Data System (ADS)

Zhang, Zhaoxia; Jiang, Qing; Li, Ping; Song, LiangTu; Wang, Rujing; Yu, Biao; Mei, Tao

2017-09-01

In this paper, the driving knowledge base of autonomous vehicle is designed. Based on the driving knowledge modeling system, the driving knowledge of autonomous vehicle is visually acquired, managed, stored, and maintenanced, which has vital significance for creating the development platform of intelligent decision-making systems of automatic driving expert systems for autonomous vehicle.

Analysis of a Knowledge-Management-Based Process of Transferring Project Management Skills

ERIC Educational Resources Information Center

Ioi, Toshihiro; Ono, Masakazu; Ishii, Kota; Kato, Kazuhiko

2012-01-01

Purpose: The purpose of this paper is to propose a method for the transfer of knowledge and skills in project management (PM) based on techniques in knowledge management (KM). Design/methodology/approach: The literature contains studies on methods to extract experiential knowledge in PM, but few studies exist that focus on methods to convert…

Injuries in women associated with a periodized strength training and running program.

PubMed

Reynolds, K L; Harman, E A; Worsham, R E; Sykes, M B; Frykman, P N; Backus, V L

2001-02-01

Forty-five women participated in a 24-week physical training program designed to improve lifting, load carriage, and running performance. Activities included weightlifting, running, backpacking, lift and carry drills, and sprint running. Physicians documented by passive surveillance all training-related injuries. Thirty-two women successfully completed training program. Twenty-two women (48.9%) suffered least 1 injury during training, but only 2 women had to drop out of the study because of injuries. The rate of injury associated with lost training time was 2.8 injuries per 1,000 training hours of exposure. Total clinic visits and days lost from training were 89 and 69, respectively. Most injuries were the overuse type involving the lower back, knees, and feet. Weightlifting accounted for a majority of the lost training days. A combined strength training and running program resulted in significant performance gains in women. Only 2 out of 45 participants left the training program cause of injuries.

Creative design inspired by biological knowledge: Technologies and methods

NASA Astrophysics Data System (ADS)

Tan, Runhua; Liu, Wei; Cao, Guozhong; Shi, Yuan

2018-05-01

Biological knowledge is becoming an important source of inspiration for developing creative solutions to engineering design problems and even has a huge potential in formulating ideas that can help firms compete successfully in a dynamic market. To identify the technologies and methods that can facilitate the development of biologically inspired creative designs, this research briefly reviews the existing biological-knowledge-based theories and methods and examines the application of biological-knowledge-inspired designs in various fields. Afterward, this research thoroughly examines the four dimensions of key technologies that underlie the biologically inspired design (BID) process. This research then discusses the future development trends of the BID process before presenting the conclusions.

On Intelligent Design and Planning Method of Process Route Based on Gun Breech Machining Process

NASA Astrophysics Data System (ADS)

Hongzhi, Zhao; Jian, Zhang

2018-03-01

The paper states an approach of intelligent design and planning of process route based on gun breech machining process, against several problems, such as complex machining process of gun breech, tedious route design and long period of its traditional unmanageable process route. Based on gun breech machining process, intelligent design and planning system of process route are developed by virtue of DEST and VC++. The system includes two functional modules--process route intelligent design and its planning. The process route intelligent design module, through the analysis of gun breech machining process, summarizes breech process knowledge so as to complete the design of knowledge base and inference engine. And then gun breech process route intelligently output. On the basis of intelligent route design module, the final process route is made, edited and managed in the process route planning module.

Knowledge acquisition and learning process description in context of e-learning

NASA Astrophysics Data System (ADS)

Kiselev, B. G.; Yakutenko, V. A.; Yuriev, M. A.

2017-01-01

This paper investigates the problem of design of e-learning and MOOC systems. It describes instructional design-based approaches to e-learning systems design: IMS Learning Design, MISA and TELOS. To solve this problem we present Knowledge Field of Educational Environment with Competence boundary conditions - instructional engineering method for self-learning systems design. It is based on the simplified TELOS approach and enables a user to create their individual learning path by choosing prerequisite and target competencies. The paper provides the ontology model for the described instructional engineering method, real life use cases and the classification of the presented model. Ontology model consists of 13 classes and 15 properties. Some of them are inherited from Knowledge Field of Educational Environment and some are new and describe competence boundary conditions and knowledge validation objects. Ontology model uses logical constraints and is described using OWL 2 standard. To give TELOS users better understanding of our approach we list mapping between TELOS and KFEEC.

Telemetry methods for monitoring physiological parameters

NASA Technical Reports Server (NTRS)

Fryer, T. B.; Sandler, H.

1982-01-01

The use of telemetry to monitor various physiological functions is discussed. The advantages of the technique and the parameters that it can monitor are assessed, and the main telemetry systems, including pressure telemetry, flow telemetry, and multichannel telemetry, are detailed. Human applications of implanted flow transducers, total implant versus backpack telemetry, the use of power sources and integrated circuits in telemetry, and the future prospects of the technique in hypertension treatment and research are discussed.

Systematic analysis of signaling pathways using an integrative environment.

PubMed

Visvanathan, Mahesh; Breit, Marc; Pfeifer, Bernhard; Baumgartner, Christian; Modre-Osprian, Robert; Tilg, Bernhard

2007-01-01

Understanding the biological processes of signaling pathways as a whole system requires an integrative software environment that has comprehensive capabilities. The environment should include tools for pathway design, visualization, simulation and a knowledge base concerning signaling pathways as one. In this paper we introduce a new integrative environment for the systematic analysis of signaling pathways. This system includes environments for pathway design, visualization, simulation and a knowledge base that combines biological and modeling information concerning signaling pathways that provides the basic understanding of the biological system, its structure and functioning. The system is designed with a client-server architecture. It contains a pathway designing environment and a simulation environment as upper layers with a relational knowledge base as the underlying layer. The TNFa-mediated NF-kB signal trans-duction pathway model was designed and tested using our integrative framework. It was also useful to define the structure of the knowledge base. Sensitivity analysis of this specific pathway was performed providing simulation data. Then the model was extended showing promising initial results. The proposed system offers a holistic view of pathways containing biological and modeling data. It will help us to perform biological interpretation of the simulation results and thus contribute to a better understanding of the biological system for drug identification.

A knowledge based search tool for performance measures in health care systems.

PubMed

Beyan, Oya D; Baykal, Nazife

2012-02-01

Performance measurement is vital for improving the health care systems. However, we are still far from having accepted performance measurement models. Researchers and developers are seeking comparable performance indicators. We developed an intelligent search tool to identify appropriate measures for specific requirements by matching diverse care settings. We reviewed the literature and analyzed 229 performance measurement studies published after 2000. These studies are evaluated with an original theoretical framework and stored in the database. A semantic network is designed for representing domain knowledge and supporting reasoning. We have applied knowledge based decision support techniques to cope with uncertainty problems. As a result we designed a tool which simplifies the performance indicator search process and provides most relevant indicators by employing knowledge based systems.

Design Specifications for the Advanced Instructional Design Advisor (AIDA). Volume 1

DTIC Science & Technology

1992-01-01

research; (3) Describe the knowledge base sufficient to support the varieties of knowledge to be represented in the AIDA model ; (4) Document the...feasibility of continuing the development of the AIDA model . 2.3 Background In Phase I of the AIDA project (Task 0006), (1) the AIDA concept was defined...the AIDA Model A paper-based demonstration of the AIDA instructional design model was performed by using the model to develop a minimal application

Enroute flight-path planning - Cooperative performance of flight crews and knowledge-based systems

NASA Technical Reports Server (NTRS)

Smith, Philip J.; Mccoy, Elaine; Layton, Chuck; Galdes, Deb

1989-01-01

Interface design issues associated with the introduction of knowledge-based systems into the cockpit are discussed. Such issues include not only questions about display and control design, they also include deeper system design issues such as questions about the alternative roles and responsibilities of the flight crew and the computer system. In addition, the feasibility of using enroute flight path planning as a context for exploring such research questions is considered. In particular, the development of a prototyping shell that allows rapid design and study of alternative interfaces and system designs is discussed.

A Knowledge-Base for a Personalized Infectious Disease Risk Prediction System.

PubMed

Vinarti, Retno; Hederman, Lucy

2018-01-01

We present a knowledge-base to represent collated infectious disease risk (IDR) knowledge. The knowledge is about personal and contextual risk of contracting an infectious disease obtained from declarative sources (e.g. Atlas of Human Infectious Diseases). Automated prediction requires encoding this knowledge in a form that can produce risk probabilities (e.g. Bayesian Network - BN). The knowledge-base presented in this paper feeds an algorithm that can auto-generate the BN. The knowledge from 234 infectious diseases was compiled. From this compilation, we designed an ontology and five rule types for modelling IDR knowledge in general. The evaluation aims to assess whether the knowledge-base structure, and its application to three disease-country contexts, meets the needs of personalized IDR prediction system. From the evaluation results, the knowledge-base conforms to the system's purpose: personalization of infectious disease risk.

A Holistic School-Based Nutrition Program Fails to Improve Teachers' Nutrition-Related Knowledge, Attitudes and Behaviour in Rural China

ERIC Educational Resources Information Center

Wang, Dongxu; Stewart, Donald; Chang, Chun

2016-01-01

Purpose: The purpose of this paper is to examine the effectiveness of a holistic school-based nutrition programme using the health-promoting school (HPS) approach, on teachers' knowledge, attitudes and behaviour in relation to nutrition in rural China. Design/methodology/approach: A cluster-randomised intervention trial design was employed. Two…

Online Case-Based Learning Design for Facilitating Classroom Teachers' Development of Technological, Pedagogical, and Content Knowledge

ERIC Educational Resources Information Center

Saltan, Fatih

2017-01-01

The aim of this study is to investigate whether, and if so how, online case-based learning influence pre-service classroom teachers' self-confidence on technological pedagogical content knowledge (TPACK). To achieve the goal, a control group pretest-posttest quasi experimental design was used. Participants of the study consisted of 160 pre-service…

Construction of dynamic stochastic simulation models using knowledge-based techniques

NASA Technical Reports Server (NTRS)

Williams, M. Douglas; Shiva, Sajjan G.

1990-01-01

Over the past three decades, computer-based simulation models have proven themselves to be cost-effective alternatives to the more structured deterministic methods of systems analysis. During this time, many techniques, tools and languages for constructing computer-based simulation models have been developed. More recently, advances in knowledge-based system technology have led many researchers to note the similarities between knowledge-based programming and simulation technologies and to investigate the potential application of knowledge-based programming techniques to simulation modeling. The integration of conventional simulation techniques with knowledge-based programming techniques is discussed to provide a development environment for constructing knowledge-based simulation models. A comparison of the techniques used in the construction of dynamic stochastic simulation models and those used in the construction of knowledge-based systems provides the requirements for the environment. This leads to the design and implementation of a knowledge-based simulation development environment. These techniques were used in the construction of several knowledge-based simulation models including the Advanced Launch System Model (ALSYM).

SSME fault monitoring and diagnosis expert system

NASA Technical Reports Server (NTRS)

Ali, Moonis; Norman, Arnold M.; Gupta, U. K.

1989-01-01

An expert system, called LEADER, has been designed and implemented for automatic learning, detection, identification, verification, and correction of anomalous propulsion system operations in real time. LEADER employs a set of sensors to monitor engine component performance and to detect, identify, and validate abnormalities with respect to varying engine dynamics and behavior. Two diagnostic approaches are adopted in the architecture of LEADER. In the first approach fault diagnosis is performed through learning and identifying engine behavior patterns. LEADER, utilizing this approach, generates few hypotheses about the possible abnormalities. These hypotheses are then validated based on the SSME design and functional knowledge. The second approach directs the processing of engine sensory data and performs reasoning based on the SSME design, functional knowledge, and the deep-level knowledge, i.e., the first principles (physics and mechanics) of SSME subsystems and components. This paper describes LEADER's architecture which integrates a design based reasoning approach with neural network-based fault pattern matching techniques. The fault diagnosis results obtained through the analyses of SSME ground test data are presented and discussed.

Professional Development for Mathematics Teachers: Using Task Design and Analysis

ERIC Educational Resources Information Center

Lee, Hea-Jin; Özgün-Koca, S. Asli

2016-01-01

This study is based on a Task Design and Analysis activity from a year-long professional development program. The activity was designed to increase teacher growth in several areas, including knowledge of mathematics, understanding of students' cognitive activity, knowledge of good questions, and ability to develop and improve high quality tasks.…

Spatial modeling of the geographic distribution of wildlife populations: A case study in the lower Mississippi River region

USGS Publications Warehouse

Ji, W.; Jeske, C.

2000-01-01

A geographic information system (GIS)-based spatial modeling approach was developed to study environmental and land use impacts on the geographic distribution of wintering northern pintails (Arias acuta) in the Lower Mississippi River region. Pintails were fitted with backpack radio transmitter packages at Catahoula Lake, LA, in October 1992-1994 and located weekly through the following March. Pintail survey data were converted into a digital database in ARC/INFO GIS format and integrated with environmental GIS data through a customized modeling interface. The study verified the relationship between pintail distributions and major environmental factors and developed a conceptual relation model. Visualization-based spatial simulations were used to display the movement patterns of specific population groups under spatial and temporal constraints. The spatial modeling helped understand the seasonal movement patterns of pintails in relation to their habitat usage in Arkansas and southwestern Louisiana for wintering and interchange situations among population groups wintering in Texas and southeastern Louisiana. (C) 2000 Elsevier Science B.V.

CATAVIÑA: new infrared camera for OAN-SPM

NASA Astrophysics Data System (ADS)

Iriarte, Arturo; Cruz-González, Irene; Martínez, Luis A.; Tinoco, Silvio; Lara, Gerardo; Ruiz, Elfego; Sohn, Erika; Bernal, Abel; Angeles, Fernando; Moreno, Arturo; Murillo, Francisco; Langarica, Rosalía; Luna, Esteban; Salas, Luis; Cajero, Vicente

2006-06-01

CATAVIÑA is a near-infrared camera system to be operated in conjunction with the existing multi-purpose nearinfrared optical bench "CAMALEON" in OAN-SPM. Observing modes include direct imaging, spectroscopy, Fabry- Perot interferometry and polarimetry. This contribution focuses on the optomechanics and detector controller description of CATAVIÑA, which is planned to start operating later in 2006. The camera consists of an 8 inch LN2 dewar containing a 10 filter carousel, a radiation baffle and the detector circuit board mount. The system is based on a Rockwell 1024x1024 HgCdTe (HAWAII-I) FPA, operating in the 1 to 2.5 micron window. The detector controller/readout system was designed and developed at UNAM Instituto de Astronomia. It is based on five Texas Instruments DSK digital signal processor (DSP) modules. One module generates the detector and ADC-system control, while the remaining four are in charge of the acquisition of each of the detector's quadrants. Each DSP has a built-in expanded memory module in order to store more than one image. The detector read-out and signal driver subsystems are mounted onto the dewar in a "back-pack" fashion, each containing four independent pre-amplifiers, converters and signal drivers, that communicate through fiber optics with their respective DSPs. This system has the possibility of programming the offset input voltage and converter gain. The controller software architecture is based on a client/server model. The client sends commands through the TCP/IP protocol and acquires the image. The server consists of a microcomputer with an embedded Linux operating system, which runs the main program that receives the user commands and interacts with the timing and acquisition DSPs. The observer's interface allows for several readout and image processing modes.

Knowledge Representation and Ontologies

NASA Astrophysics Data System (ADS)

Grimm, Stephan

Knowledge representation and reasoning aims at designing computer systems that reason about a machine-interpretable representation of the world. Knowledge-based systems have a computational model of some domain of interest in which symbols serve as surrogates for real world domain artefacts, such as physical objects, events, relationships, etc. [1]. The domain of interest can cover any part of the real world or any hypothetical system about which one desires to represent knowledge for com-putational purposes. A knowledge-based system maintains a knowledge base, which stores the symbols of the computational model in the form of statements about the domain, and it performs reasoning by manipulating these symbols. Applications can base their decisions on answers to domain-relevant questions posed to a knowledge base.

Building distributed rule-based systems using the AI Bus

NASA Technical Reports Server (NTRS)

Schultz, Roger D.; Stobie, Iain C.

1990-01-01

The AI Bus software architecture was designed to support the construction of large-scale, production-quality applications in areas of high technology flux, running heterogeneous distributed environments, utilizing a mix of knowledge-based and conventional components. These goals led to its current development as a layered, object-oriented library for cooperative systems. This paper describes the concepts and design of the AI Bus and its implementation status as a library of reusable and customizable objects, structured by layers from operating system interfaces up to high-level knowledge-based agents. Each agent is a semi-autonomous process with specialized expertise, and consists of a number of knowledge sources (a knowledge base and inference engine). Inter-agent communication mechanisms are based on blackboards and Actors-style acquaintances. As a conservative first implementation, we used C++ on top of Unix, and wrapped an embedded Clips with methods for the knowledge source class. This involved designing standard protocols for communication and functions which use these protocols in rules. Embedding several CLIPS objects within a single process was an unexpected problem because of global variables, whose solution involved constructing and recompiling a C++ version of CLIPS. We are currently working on a more radical approach to incorporating CLIPS, by separating out its pattern matcher, rule and fact representations and other components as true object oriented modules.

XML-Based SHINE Knowledge Base Interchange Language

NASA Technical Reports Server (NTRS)

James, Mark; Mackey, Ryan; Tikidjian, Raffi

2008-01-01

The SHINE Knowledge Base Interchange Language software has been designed to more efficiently send new knowledge bases to spacecraft that have been embedded with the Spacecraft Health Inference Engine (SHINE) tool. The intention of the behavioral model is to capture most of the information generally associated with a spacecraft functional model, while specifically addressing the needs of execution within SHINE and Livingstone. As such, it has some constructs that are based on one or the other.

Evaluation of resting traps to examine the behaviour and ecology of mosquito vectors in an area of rapidly changing land use in Sabah, Malaysian Borneo.

PubMed

Brown, Rebecca; Hing, Chua Tock; Fornace, Kimberly; Ferguson, Heather M

2018-06-14

Widespread deforestation occurring in the tropics is hypothesized to impact the transmission of vector-borne diseases (VBD). Predicting how environmental changes will impact VBD transmission is dependent on understanding the ecology and behaviour of potential vector species outside of domestic settings. However there are few reliable sampling tools for measuring the habitat preference and host choice of mosquito vectors; with almost none suitable for sampling recently blood-fed, resting mosquitoes. This study evaluated the use of two mosquito traps: the resting bucket (RB) and sticky resting bucket (SRB) traps relative to CDC backpack aspiration (CDC) for sampling mosquitoes resting in a range of habitats representing a gradient of deforestation. Eight habitats were selected for sampling around two villages in Kudat District, Malaysian Borneo, to reflect the range of habitats available to mosquitoes in and around human dwellings, and nearby forest habitats where reservoir hosts are present: secondary forest (edge, interior and canopy); plantations (palm and rubber); and human settlements (inside, under and around houses). Over 31 days, 2243 mosquitoes were collected in 5748 discrete collections. Nine mosquito genera were sampled with Aedes and Culex species being present in all habitats and most abundant. RB and CDC backpack aspiration were most efficient for sampling Culex whereas CDC backpack aspiration and SRB were most efficient for Aedes. Most Aedes identified to species level were Ae. albopictus (91%), with their abundance being highest in forest edge habitats. In contrast, Culex were most abundant under houses. Most blood-fed mosquitoes (76%) were found in human settlements; with humans and chickens being the only blood source. RB and SRB traps proved capable of sampling mosquitoes resting in all sampled habitats. However, sampling efficiency was generally low (c.0.1 per trap per day), necessitating traps to be deployed in high numbers for mosquito detection. None of the traps were effective for sampling zoonotic malaria vectors; however, SRB collected relatively higher numbers of the dengue vector Ae. albopictus. The higher abundance of mosquitoes in forest edge habitats indicates the potential value of these traps for investigating sylvatic dengue transmission. This study has demonstrated the merits in application of simple resting traps for characterising mosquito vector resting behaviour outside of the home.

A knowledge-based flight status monitor for real-time application in digital avionics systems

NASA Technical Reports Server (NTRS)

Duke, E. L.; Disbrow, J. D.; Butler, G. F.

1989-01-01

The Dryden Flight Research Facility of the National Aeronautics and Space Administration (NASA) Ames Research Center (Ames-Dryden) is the principal NASA facility for the flight testing and evaluation of new and complex avionics systems. To aid in the interpretation of system health and status data, a knowledge-based flight status monitor was designed. The monitor was designed to use fault indicators from the onboard system which are telemetered to the ground and processed by a rule-based model of the aircraft failure management system to give timely advice and recommendations in the mission control room. One of the important constraints on the flight status monitor is the need to operate in real time, and to pursue this aspect, a joint research activity between NASA Ames-Dryden and the Royal Aerospace Establishment (RAE) on real-time knowledge-based systems was established. Under this agreement, the original LISP knowledge base for the flight status monitor was reimplemented using the intelligent knowledge-based system toolkit, MUSE, which was developed under RAE sponsorship. Details of the flight status monitor and the MUSE implementation are presented.

STRUTEX: A prototype knowledge-based system for initially configuring a structure to support point loads in two dimensions

NASA Technical Reports Server (NTRS)

Robers, James L.; Sobieszczanski-Sobieski, Jaroslaw

1989-01-01

Only recently have engineers begun making use of Artificial Intelligence (AI) tools in the area of conceptual design. To continue filling this void in the design process, a prototype knowledge-based system, called STRUTEX has been developed to initially configure a structure to support point loads in two dimensions. This prototype was developed for testing the application of AI tools to conceptual design as opposed to being a testbed for new methods for improving structural analysis and optimization. This system combines numerical and symbolic processing by the computer with interactive problem solving aided by the vision of the user. How the system is constructed to interact with the user is described. Of special interest is the information flow between the knowledge base and the data base under control of the algorithmic main program. Examples of computed and refined structures are presented during the explanation of the system.

Defense Acquisitions: Assessments of Selected Weapon Programs

DTIC Science & Technology

2012-03-01

knowledge-based practices. As a result , most of these programs will carry technology, design, and production risks into subsequent phases of the...acquisition process that could result in cost growth or schedule delays. GAO also assessed the implementation of selected acquisition reforms and found...knowledge-based practices. As a result , most of these programs will carry technology, design, and production risks into subsequent phases of the

Advanced piloted aircraft flight control system design methodology. Volume 1: Knowledge base

NASA Technical Reports Server (NTRS)

Mcruer, Duane T.; Myers, Thomas T.

1988-01-01

The development of a comprehensive and electric methodology for conceptual and preliminary design of flight control systems is presented and illustrated. The methodology is focused on the design stages starting with the layout of system requirements and ending when some viable competing system architectures (feedback control structures) are defined. The approach is centered on the human pilot and the aircraft as both the sources of, and the keys to the solution of, many flight control problems. The methodology relies heavily on computational procedures which are highly interactive with the design engineer. To maximize effectiveness, these techniques, as selected and modified to be used together in the methodology, form a cadre of computational tools specifically tailored for integrated flight control system preliminary design purposes. While theory and associated computational means are an important aspect of the design methodology, the lore, knowledge and experience elements, which guide and govern applications are critical features. This material is presented as summary tables, outlines, recipes, empirical data, lists, etc., which encapsulate a great deal of expert knowledge. Much of this is presented in topical knowledge summaries which are attached as Supplements. The composite of the supplements and the main body elements constitutes a first cut at a a Mark 1 Knowledge Base for manned-aircraft flight control.

Restoring Consistency In Subjective Information For Groundwater Driven Health Risk Assessment

NASA Astrophysics Data System (ADS)

Ozbek, M. M.; Pinder, G. F.

2004-12-01

In an earlier work (Ozbek and Pinder, 2003), we constructed a fuzzy rule-based knowledge base that uses subjective expert opinion to calculate risk-based design constraints (i.e., dose and pattern of exposure) to sustain the groundwater-driven individual health risk at a desired level. Ideally, our system must be capable to produce for any individual a meaningful risk result or for any given risk a meaningful design constraint, in the sense that the result is neither the empty set nor the whole domain of the variable of interest. Otherwise we consider our system as inconsistent. We present a method based on fuzzy similarity relations to restore consistency in our implicative fuzzy rule based system used for the risk-based groundwater remediation design problem. Both a global and a local approach are considered. Even though straightforward and computationally less demanding, the global approach can affect pieces of knowledge negatively by inducing unwarranted imprecision into the knowledge base. On the other hand, the local approach, given a family of parameterized similarity relations, determines a parameter for each inference such that consistent results are computed which may not be feasible in real time applications of our knowledge base. Several scenarios are considered for comparing the two approaches that suggest that for specific applications one or several approaches ranging from a completely global to a completely local one will be more suitable than others while calculating the design constraints.

The smooth (tractor) operator: insights of knowledge engineering.

PubMed

Cullen, Ralph H; Smarr, Cory-Ann; Serrano-Baquero, Daniel; McBride, Sara E; Beer, Jenay M; Rogers, Wendy A

2012-11-01

The design of and training for complex systems requires in-depth understanding of task demands imposed on users. In this project, we used the knowledge engineering approach (Bowles et al., 2004) to assess the task of mowing in a citrus grove. Knowledge engineering is divided into four phases: (1) Establish goals. We defined specific goals based on the stakeholders involved. The main goal was to identify operator demands to support improvement of the system. (2) Create a working model of the system. We reviewed product literature, analyzed the system, and conducted expert interviews. (3) Extract knowledge. We interviewed tractor operators to understand their knowledge base. (4) Structure knowledge. We analyzed and organized operator knowledge to inform project goals. We categorized the information and developed diagrams to display the knowledge effectively. This project illustrates the benefits of knowledge engineering as a qualitative research method to inform technology design and training. Copyright © 2012 Elsevier Ltd and The Ergonomics Society. All rights reserved.

Employee knowledge of value-based insurance design benefits.

PubMed

Henrikson, Nora B; Anderson, Melissa L; Hubbard, Rebecca A; Fishman, Paul; Grossman, David C

2014-08-01

Value-based insurance designs (VBD) incorporate evidence-based medicine into health benefit design. Consumer knowledge of new VBD benefits is important to assessing their impact on health care use. To assess knowledge of features of a VBD. The eligible study population was employees receiving healthcare benefits in an integrated care system in the U.S. Pacific Northwest. In 2010, participants completed a web-based survey 2 months after rollout of the plan, including three true/false questions about benefit design features including copays for preventive care visits and chronic disease medications and premium costs. Analysis was completed in 2012. Knowledgeable was defined as correct response to all three questions; self-reported knowledge was also assessed. A total of 3,463 people completed the survey (response rate=71.7%). The majority of respondents were female (80.1%) Caucasians (79.6%) aged 35-64 years (79.0%), reflecting the overall employee population. A total of 45.7% had at least a 4-year college education, and 69.1% were married. About three quarters of respondents correctly answered each individual question; half (52.1%) of respondents answered all three questions correctly. On multivariate analysis, knowledge was independently associated with female gender (OR=1.80, 95% CI=1.40, 2.31); Caucasian race (OR=1.72, 95% CI=1.28, 2.32); increasing household income (OR for ≥$100,000=1.86, 95% CI=1.29, 2.68); nonunion job status (OR compared to union status=1.63, 95% CI=1.17, 2.26); and high satisfaction with the health plan (OR compared to low satisfaction=1.26; 95% CI=1.00, 1.57). Incomplete knowledge of benefits is prevalent in an employee population soon after VBD rollout. Copyright © 2014 American Journal of Preventive Medicine. Published by Elsevier Inc. All rights reserved.

A Proposal to Develop Interactive Classification Technology

NASA Technical Reports Server (NTRS)

deBessonet, Cary

1998-01-01

Research for the first year was oriented towards: 1) the design of an interactive classification tool (ICT); and 2) the development of an appropriate theory of inference for use in ICT technology. The general objective was to develop a theory of classification that could accommodate a diverse array of objects, including events and their constituent objects. Throughout this report, the term "object" is to be interpreted in a broad sense to cover any kind of object, including living beings, non-living physical things, events, even ideas and concepts. The idea was to produce a theory that could serve as the uniting fabric of a base technology capable of being implemented in a variety of automated systems. The decision was made to employ two technologies under development by the principal investigator, namely, SMS (Symbolic Manipulation System) and SL (Symbolic Language) [see debessonet, 1991, for detailed descriptions of SMS and SL]. The plan was to enhance and modify these technologies for use in an ICT environment. As a means of giving focus and direction to the proposed research, the investigators decided to design an interactive, classificatory tool for use in building accessible knowledge bases for selected domains. Accordingly, the proposed research was divisible into tasks that included: 1) the design of technology for classifying domain objects and for building knowledge bases from the results automatically; 2) the development of a scheme of inference capable of drawing upon previously processed classificatory schemes and knowledge bases; and 3) the design of a query/ search module for accessing the knowledge bases built by the inclusive system. The interactive tool for classifying domain objects was to be designed initially for textual corpora with a view to having the technology eventually be used in robots to build sentential knowledge bases that would be supported by inference engines specially designed for the natural or man-made environments in which the robots would be called upon to operate.

An application of object-oriented knowledge representation to engineering expert systems

NASA Technical Reports Server (NTRS)

Logie, D. S.; Kamil, H.; Umaretiya, J. R.

1990-01-01

The paper describes an object-oriented knowledge representation and its application to engineering expert systems. The object-oriented approach promotes efficient handling of the problem data by allowing knowledge to be encapsulated in objects and organized by defining relationships between the objects. An Object Representation Language (ORL) was implemented as a tool for building and manipulating the object base. Rule-based knowledge representation is then used to simulate engineering design reasoning. Using a common object base, very large expert systems can be developed, comprised of small, individually processed, rule sets. The integration of these two schemes makes it easier to develop practical engineering expert systems. The general approach to applying this technology to the domain of the finite element analysis, design, and optimization of aerospace structures is discussed.

Report of the Presidential Commission on the Space Shuttle Challenger Accident. Volume 1

DTIC Science & Technology

1986-06-06

of February 3 , 1986, the undersigned present the report of the Presidential Commission on the Space Shuttle Challenger Accident. Chairman, Maryland...spacecraft had flown twice. Failure of a fuel cell shortened the flight by about three days. ■ STS- 3 , March 22-30, 1982, Orbiter Colum- bia, was the...Flight 10 (41-B), February 3 -11, 1984, Or- biter Challenger, was highlighted by the in- troduction of the Manned Maneuvering Unit, a backpack

A Mathematical Model of the Inertial Properties of a Carrier-Backpack System. Volume IV

DTIC Science & Technology

1982-05-01

B.S., and Richard C. Nelson, Ph.D. 9. PERFORMING OR3ANIZATION NAME AND ADDRESS 10. PROGRAM ELEMENT, PROJECT, TASK BIomechanics Labo-atory AREA 6 WORK...Recommendations for rarther Study 30 Cited References 31 Appendices A. Clothing and Equipment Used in This Study 33 B. IMSL Policy Statement 49 C. The Biomechanica... biomechanics , researchers use a variety of research techn iques to evaluate various aspects of physical performance. Mathematical modeling is one

The Effects of a Lower Body Exoskeleton Load Carriage Assistive Device on Oxygen Consumption and Kinematics During Walking with Loads

DTIC Science & Technology

2006-11-01

analyze the associated gait biomechanics . Ten Army enlisted men participated in the study. Oxygen consumption (VO2) and gait biomechanics were...measured while Soldiers walked at 4.83 km/h and 0% grade under three realistic load weight configurations that were comprised of Army clothing and...increases users’ metabolic cost while carrying various loads and alters their gait biomechanics compared to conventional load carriage using a backpack

Air Force Project Competition

DTIC Science & Technology

2014-10-22

FA9550-11-1-0235 final report The Johns Hopkins University Dr Nathan Scott 7 Team BRX 2012-13: Will Crawford, Ben Wasser , Renata Smith, Danny Fisher...custom sock and braced with guy ropes. See Fig. 8. Fig. 8 Ben Wasser and Will Crawford testing the bridge in April 2013. FA9550-11-1-0235 final report...The Johns Hopkins University Dr Nathan Scott 8 Fig. 9 Ben Wasser carrying the folded, stowed bridge in its backpack. The pack weighed about 45lb

Air Force Project Competition

DTIC Science & Technology

2014-10-17

FA9550-11-1-0235 final report The Johns Hopkins University Dr Nathan Scott 7 Team BRX 2012-13: Will Crawford, Ben Wasser , Renata Smith, Danny Fisher...custom sock and braced with guy ropes. See Fig. 8. Fig. 8 Ben Wasser and Will Crawford testing the bridge in April 2013. FA9550-11-1-0235 final report...The Johns Hopkins University Dr Nathan Scott 8 Fig. 9 Ben Wasser carrying the folded, stowed bridge in its backpack. The pack weighed about 45lb

Man-Portable Vector EMI Sensor for Full UXO Characterization

DTIC Science & Technology

2012-03-01

receivers (for survey in forest and/or in steep terrain). Left inset shows data acquisition (DAQ) and power unit mounted on a backpack frame. Right panel...survey list was created such as to minimize the overall travel distance to visit every anomaly. After the daily IVS survey field operators walked to...the red star at coordinates (0, 0), is generally offset from the signal peak. This observation motivated use of a conservative 3x3-point-grid survey

Jemaah Islamiyah: Reevaluating the Most Dangerous Terrorist Threat in Southeast Asia

DTIC Science & Technology

2010-12-01

why some terrorist groups last longer than others, namely “ideological motivation , economic conditions, regime type, the size of groups, and/or the...States Air Force, RAND Corporation and Project Air Force (U.S.), The Dynamic Terrorist Threat: An Assessment of Group Motivations and Capabilities in a...in 2003 and 2004, then shifted tactics from car bombs to backpack bombs for their 2005 and 2009 attacks.58 Their operatives received safe haven and

Fast, Automated, Scalable Generation of Textured 3D Models of Indoor Environments

DTIC Science & Technology

2014-12-18

expensive travel and on-site visits. Different applications require models of different complexities, both with and without furniture geometry. The...environment and to localize the system in the environment over time. The datasets shown in this paper were generated by a backpack -mounted system that uses 2D...voxel is found to intersect the line segment from a scanner to a corresponding scan point. If a laser passes through a voxel, that voxel is considered

Deep-Diving California Sea Lions: Are they Pushing their Physiological Limit

DTIC Science & Technology

2013-09-30

backpack digital recorders to measure blood oxygen depletion, heart rate, and flipper stroke rate in dives of California sea lions during maternal...relationship between changes in heart rate to blood O2 profiles, and 3) documentation of flipper stroke rate profiles during shallow and deep dives, and...assessment of the relationship of stroke rate to both changes in heart rate and changes in blood O2 profiles. APPROACH Objective 1: In order to

Systematic Calibration for a Backpacked Spherical Photogrammetry Imaging System

NASA Astrophysics Data System (ADS)

Rau, J. Y.; Su, B. W.; Hsiao, K. W.; Jhan, J. P.

2016-06-01

A spherical camera can observe the environment for almost 720 degrees' field of view in one shoot, which is useful for augmented reality, environment documentation, or mobile mapping applications. This paper aims to develop a spherical photogrammetry imaging system for the purpose of 3D measurement through a backpacked mobile mapping system (MMS). The used equipment contains a Ladybug-5 spherical camera, a tactical grade positioning and orientation system (POS), i.e. SPAN-CPT, and an odometer, etc. This research aims to directly apply photogrammetric space intersection technique for 3D mapping from a spherical image stereo-pair. For this purpose, several systematic calibration procedures are required, including lens distortion calibration, relative orientation calibration, boresight calibration for direct georeferencing, and spherical image calibration. The lens distortion is serious on the ladybug-5 camera's original 6 images. Meanwhile, for spherical image mosaicking from these original 6 images, we propose the use of their relative orientation and correct their lens distortion at the same time. However, the constructed spherical image still contains systematic error, which will reduce the 3D measurement accuracy. Later for direct georeferencing purpose, we need to establish a ground control field for boresight/lever-arm calibration. Then, we can apply the calibrated parameters to obtain the exterior orientation parameters (EOPs) of all spherical images. In the end, the 3D positioning accuracy after space intersection will be evaluated, including EOPs obtained by structure from motion method.

Multiplatform Mobile Laser Scanning: Usability and Performance

PubMed Central

Kukko, Antero; Kaartinen, Harri; Hyyppä, Juha; Chen, Yuwei

2012-01-01

Mobile laser scanning is an emerging technology capable of capturing three-dimensional data from surrounding objects. With state-of-the-art sensors, the achieved point clouds capture object details with good accuracy and precision. Many of the applications involve civil engineering in urban areas, as well as traffic and other urban planning, all of which serve to make 3D city modeling probably the fastest growing market segment in this field. This article outlines multiplatform mobile laser scanning solutions such as vehicle- and trolley-operated urban area data acquisition, and boat-mounted equipment for fluvial environments. Moreover, we introduce a novel backpack version of mobile laser scanning equipment for surveying applications in the field of natural sciences where the requirements include precision and mobility in variable terrain conditions. In addition to presenting a technical description of the systems, we discuss the performance of the solutions in the light of various applications in the fields of urban mapping and modeling, fluvial geomorphology, snow-cover characterization, precision agriculture, and in monitoring the effects of climate change on permafrost landforms. The data performance of the mobile laser scanning approach is described by the results of an evaluation of the ROAMER on a permanent MLS test field. Furthermore, an in situ accuracy assessment using a field of spherical 3D targets for the newly-introduced Akhka backpack system is conducted and reported on.

Comparison of hiking stick use on lateral stability while balancing with and without a load.

PubMed

Jacobson, B H; Caldwell, B; Kulling, F A

1997-08-01

To compare hiking stick use on lateral stability while balancing with or without a load (15-kg internal frame backpack) under conditions of no stick, 1 stick, and 2 sticks for six trials 15 volunteers ages 19 to 23 years (M = 21.7 yr.) were tested six separate times on a stability platform. During randomly ordered, 1-min. trials, the length of time (sec.) the subject maintained balance (+/-10 degrees of horizontal) and the number of deviations beyond 10 degrees were recorded simultaneously. Backpack and hiking sticks were individually adjusted for each subject. A 2 x 3 repeated factor analysis of variance indicated that subjects balanced significantly longer both with and without a load while using 2 hiking sticks than 1 or 0 sticks. Significantly fewer deviations beyond 10 degrees were found when subjects were without a load and using 1 or 2 sticks versus when they used none, and no significant difference in the number of deviations were found between 1 and 2 hiking sticks. When subjects were equipped with a load, significantly improved balance was found only between the 2 sticks and no sticks. Balance was significantly enhanced by using hiking sticks, and two sticks were more effective than one while carrying a load. An increase in maintenance of static balance may reduce the possibility of falling and injury while standing on loose alpine terrain.

Comparison of work rates, energy expenditure, and perceived exertion during a 1-h vacuuming task with a backpack vacuum cleaner and an upright vacuum cleaner.

PubMed

Mengelkoch, Larry J; Clark, Kirby

2006-03-01

The purpose of this study was to evaluate two types of industrial vacuum cleaners, in terms of cleaning rates, energy expenditure, and perceived exertion. Twelve industrial cleaners (six males and six females, age 28-39 yr) performed two 1-h vacuuming tasks with an upright vacuum cleaner (UVC) and a backpack vacuum cleaner (BPVC). Measures for oxygen uptake (VO2) and ratings of perceived exertion (RPE) were collected continuously during the 1-h vacuuming tasks. Cleaning rates for the UVC and BPVC were 7.23 and 14.98 m2min(-1), respectively. On a separate day subjects performed a maximal treadmill exercise test to determine their maximal aerobic capacity (peak VO2). Average absolute energy costs (in Metabolic equivalents), relative energy costs of the vacuum task compared to the subjects' maximal aerobic capacity (% peak VO2), and RPE responses for the 1-h vacuuming tasks were similar between vacuum cleaners, but % peak VO2 and RPE values differed between genders. These results indicate that the BPVC was more efficient than the UVC. With the BPVC, experienced workers vacuumed at a cleaning rate 2.07 times greater than the UVC and had similar levels of energy expenditure and perceived effort, compared to the slower cleaning rate with the UVC.

Design of secondary and subdivision roads in Virginia based on thickness equivalency values.

DOT National Transportation Integrated Search

1971-01-01

The design of secondary and subdivision roads in Virginia is based on the design charts recommended by the Highway Department. In view of recently gained knowledge of materials and design techniques, the Pavement Research Advisory Committee requested...

When Mind, Heart, and Hands Meet: Communication Design and Designers

ERIC Educational Resources Information Center

Cheung, Ming

2012-01-01

Hong Kong's transformation from a manufacturing to a knowledge-based economy has prompted the local government to promote the city as a regional design center. The 2008 Policy Address delivered by Hong Kong's Chief Executive calls for the creation of a large pool of creative and knowledgeable talent. The government recognizes that, in addition to…

Defense Acquisitions: Assessments of Selected Weapon Programs

DTIC Science & Technology

2015-03-01

offices on technology, design , and manufacturing knowledge; the use of knowledge- based acquisition practices; and the implementation of acquisition...and production maturity using two data-collection instruments, including a questionnaire on issues such as systems engineering reviews, design ...Demonstrating technology maturity is a prerequisite for moving forward into system development, during which the focus should be on design and

Designer: A Knowledge-Based Graphic Design Assistant.

ERIC Educational Resources Information Center

Weitzman, Louis

This report describes Designer, an interactive tool for assisting with the design of two-dimensional graphic interfaces for instructional systems. The system, which consists of a color graphics interface to a mathematical simulation, provides enhancements to the Graphics Editor component of Steamer (a computer-based training system designed to aid…

Knowledge synthesis with maps of neural connectivity.

PubMed

Tallis, Marcelo; Thompson, Richard; Russ, Thomas A; Burns, Gully A P C

2011-01-01

This paper describes software for neuroanatomical knowledge synthesis based on neural connectivity data. This software supports a mature methodology developed since the early 1990s. Over this time, the Swanson laboratory at USC has generated an account of the neural connectivity of the sub-structures of the hypothalamus, amygdala, septum, hippocampus, and bed nucleus of the stria terminalis. This is based on neuroanatomical data maps drawn into a standard brain atlas by experts. In earlier work, we presented an application for visualizing and comparing anatomical macro connections using the Swanson third edition atlas as a framework for accurate registration. Here we describe major improvements to the NeuARt application based on the incorporation of a knowledge representation of experimental design. We also present improvements in the interface and features of the data mapping components within a unified web-application. As a step toward developing an accurate sub-regional account of neural connectivity, we provide navigational access between the data maps and a semantic representation of area-to-area connections that they support. We do so based on an approach called "Knowledge Engineering from Experimental Design" (KEfED) model that is based on experimental variables. We have extended the underlying KEfED representation of tract-tracing experiments by incorporating the definition of a neuronanatomical data map as a measurement variable in the study design. This paper describes the software design of a web-application that allows anatomical data sets to be described within a standard experimental context and thus indexed by non-spatial experimental design features.

Considerations for a design and operations knowledge support system for Space Station Freedom

NASA Technical Reports Server (NTRS)

Erickson, Jon D.; Crouse, Kenneth H.; Wechsler, Donald B.; Flaherty, Douglas R.

1989-01-01

Engineering and operations of modern engineered systems depend critically upon detailed design and operations knowledge that is accurate and authoritative. A design and operations knowledge support system (DOKSS) is a modern computer-based information system providing knowledge about the creation, evolution, and growth of an engineered system. The purpose of a DOKSS is to provide convenient and effective access to this multifaceted information. The complexity of Space Station Freedom's (SSF's) systems, elements, interfaces, and organizations makes convenient access to design knowledge especially important, when compared to simpler systems. The life cycle length, being 30 or more years, adds a new dimension to space operations, maintenance, and evolution. Provided here is a review and discussion of design knowledge support systems to be delivered and operated as a critical part of the engineered system. A concept of a DOKSS for Space Station Freedom (SSF) is presented. This is followed by a detailed discussion of a DOKSS for the Lyndon B. Johnson Space Center and Work Package-2 portions of SSF.

Developing Evidence for Public Health Policy and Practice: The Implementation of a Knowledge Translation Approach in a Staged, Multi-Methods Study in England, 2007-09

ERIC Educational Resources Information Center

South, Jane; Cattan, Mima

2014-01-01

Effective knowledge translation processes are critical for the development of evidence-based public health policy and practice. This paper reports on the design and implementation of an innovative approach to knowledge translation within a mixed methods study on lay involvement in public health programme delivery. The study design drew on…

Message Design Guidelines For Screen-Based Programs.

ERIC Educational Resources Information Center

Rimar, G. I.

1996-01-01

Effective message design for screen-based computer or video instructional programs requires knowledge from many disciplines. Evaluates current conventions and suggests a new set of guidelines for screen-based designers. Discusses screen layout, highlighting and cueing, text font and style, text positioning, color, and graphical user interfaces for…

A knowledge-based design framework for airplane conceptual and preliminary design

NASA Astrophysics Data System (ADS)

Anemaat, Wilhelmus A. J.

The goal of work described herein is to develop the second generation of Advanced Aircraft Analysis (AAA) into an object-oriented structure which can be used in different environments. One such environment is the third generation of AAA with its own user interface, the other environment with the same AAA methods (i.e. the knowledge) is the AAA-AML program. AAA-AML automates the initial airplane design process using current AAA methods in combination with AMRaven methodologies for dependency tracking and knowledge management, using the TechnoSoft Adaptive Modeling Language (AML). This will lead to the following benefits: (1) Reduced design time: computer aided design methods can reduce design and development time and replace tedious hand calculations. (2) Better product through improved design: more alternative designs can be evaluated in the same time span, which can lead to improved quality. (3) Reduced design cost: due to less training and less calculation errors substantial savings in design time and related cost can be obtained. (4) Improved Efficiency: the design engineer can avoid technically correct but irrelevant calculations on incomplete or out of sync information, particularly if the process enables robust geometry earlier. Although numerous advancements in knowledge based design have been developed for detailed design, currently no such integrated knowledge based conceptual and preliminary airplane design system exists. The third generation AAA methods are tested over a ten year period on many different airplane designs. Using AAA methods will demonstrate significant time savings. The AAA-AML system will be exercised and tested using 27 existing airplanes ranging from single engine propeller, business jets, airliners, UAV's to fighters. Data for the varied sizing methods will be compared with AAA results, to validate these methods. One new design, a Light Sport Aircraft (LSA), will be developed as an exercise to use the tool for designing a new airplane. Using these tools will show an improvement in efficiency over using separate programs due to the automatic recalculation with any change of input data. The direct visual feedback of 3D geometry in the AAA-AML, will lead to quicker resolving of problems as opposed to conventional methods.

A knowledge-based system design/information tool

NASA Technical Reports Server (NTRS)

Allen, James G.; Sikora, Scott E.

1990-01-01

The objective of this effort was to develop a Knowledge Capture System (KCS) for the Integrated Test Facility (ITF) at the Dryden Flight Research Facility (DFRF). The DFRF is a NASA Ames Research Center (ARC) facility. This system was used to capture the design and implementation information for NASA's high angle-of-attack research vehicle (HARV), a modified F/A-18A. In particular, the KCS was used to capture specific characteristics of the design of the HARV fly-by-wire (FBW) flight control system (FCS). The KCS utilizes artificial intelligence (AI) knowledge-based system (KBS) technology. The KCS enables the user to capture the following characteristics of automated systems: the system design; the hardware (H/W) design and implementation; the software (S/W) design and implementation; and the utilities (electrical and hydraulic) design and implementation. A generic version of the KCS was developed which can be used to capture the design information for any automated system. The deliverable items for this project consist of the prototype generic KCS and an application, which captures selected design characteristics of the HARV FCS.

Knowledge discovery from data and Monte-Carlo DEA to evaluate technical efficiency of mental health care in small health areas

PubMed Central

García-Alonso, Carlos; Pérez-Naranjo, Leonor

2009-01-01

Introduction Knowledge management, based on information transfer between experts and analysts, is crucial for the validity and usability of data envelopment analysis (DEA). Aim To design and develop a methodology: i) to assess technical efficiency of small health areas (SHA) in an uncertainty environment, and ii) to transfer information between experts and operational models, in both directions, for improving expert’s knowledge. Method A procedure derived from knowledge discovery from data (KDD) is used to select, interpret and weigh DEA inputs and outputs. Based on KDD results, an expert-driven Monte-Carlo DEA model has been designed to assess the technical efficiency of SHA in Andalusia. Results In terms of probability, SHA 29 is the most efficient being, on the contrary, SHA 22 very inefficient. 73% of analysed SHA have a probability of being efficient (Pe) >0.9 and 18% <0.5. Conclusions Expert knowledge is necessary to design and validate any operational model. KDD techniques make the transfer of information from experts to any operational model easy and results obtained from the latter improve expert’s knowledge.

The Second Prototype of the Development of a Technological Pedagogical Content Knowledge Based Instructional Design Model: An Implementation Study in a Technology Integration Course

ERIC Educational Resources Information Center

Lee, Chia-Jung; Kim, ChanMin

2014-01-01

This study presents a refined technological pedagogical content knowledge (also known as TPACK) based instructional design model, which was revised using findings from the implementation study of a prior model. The refined model was applied in a technology integration course with 38 preservice teachers. A case study approach was used in this…

Flipped Instruction in English Language Teacher Education: A Design-­Based Study in a Complex, Open-­Ended Learning Environment

ERIC Educational Resources Information Center

Egbert, Joy; Herman, David; Lee, HyunGyung

2015-01-01

Reports of flipped classrooms across areas in the field of ESL are rare, and those that address the complexities of ESL teacher education, particularly the methods course in which procedural knowledge is privileged over declarative knowledge, are even rarer. This paper uses a design-­-based research (DBR) approach to explore the flip of an ESL…

Machine intelligence and autonomy for aerospace systems

NASA Technical Reports Server (NTRS)

Heer, Ewald (Editor); Lum, Henry (Editor)

1988-01-01

The present volume discusses progress toward intelligent robot systems in aerospace applications, NASA Space Program automation and robotics efforts, the supervisory control of telerobotics in space, machine intelligence and crew/vehicle interfaces, expert-system terms and building tools, and knowledge-acquisition for autonomous systems. Also discussed are methods for validation of knowledge-based systems, a design methodology for knowledge-based management systems, knowledge-based simulation for aerospace systems, knowledge-based diagnosis, planning and scheduling methods in AI, the treatment of uncertainty in AI, vision-sensing techniques in aerospace applications, image-understanding techniques, tactile sensing for robots, distributed sensor integration, and the control of articulated and deformable space structures.

Multi-Level Assessment of Scientific Content Knowledge Gains Associated with Socioscientific Issues-Based Instruction

ERIC Educational Resources Information Center

Klosterman, Michelle L.; Sadler, Troy D.

2010-01-01

This study explored the impact of using a socioscientific issue (SSI) based curriculum on developing science content knowledge. Using a multi-level assessment design, student content knowledge gains were measured before and after implementation of a three-week unit on global warming (a prominent SSI) that explored both the relevant science content…

Usability Design Strategies for Children: Developing Children's Learning and Knowledge in Decreasing Their Dental Anxiety

ERIC Educational Resources Information Center

Yahaya, Wan Ahmad Jaafar Wan; Salam, Sobihatun Nur Abdul

2010-01-01

This paper presents an example of how usability design strategies for children can be designed into educational material using CD-ROM based multimedia application for assisting parents and teachers to develop children's learning and knowledge in decreasing as well as motivate children aged 7-9 years old to reduce their anxious feelings towards…

Epistemological Beliefs and Knowledge Sharing in Work Teams: A New Model and Research Questions

ERIC Educational Resources Information Center

Weinberg, Frankie J.

2015-01-01

Purpose: The purpose of this paper is to present a knowledge-sharing model that explains individual members' motivation to share knowledge (knowledge donation and knowledge collection). Design/methodology/approach: The model is based on social-constructivist theories of epistemological beliefs, learning and distributed cognition, and is organized…

Bone Quest - A Space-Based Science and Health Education Unit

NASA Technical Reports Server (NTRS)

Smith, Scott M.; David-Street, Janis E.; Abrams, Steve A.

2000-01-01

This proposal addresses the need for effective and innovative science and health education materials that focus on space bone biology and its implications for bone health on Earth. The focus of these materials, bone biology and health, will increase science knowledge as well as health awareness. Current investigations of the bone loss observed after long-duration space missions provide a link between studies of bone health in space, and studies of osteoporosis, a disease characterized by bone loss and progressive skeletal weakness. The overall goal of this project is to design and develop web-based and print-based materials for high school science students, that will address the following: a) knowledge of normal bone biology and bone biology in a microgravity environment; b) knowledge of osteoporosis; c) knowledge of treatment modalities for space- and Earth-based bone loss; and d} bone-related nutrition knowledge and behavior. To this end, we propose to design and develop a Bone Biology Tutorial which will instruct students about normal bone biology, bone biology in a microgravity environment, osteoporosis - its definition, detection, risk factors, and prevention, treatment modalities for space- and Earth-based bone loss, and the importance of nutrition in bone health. Particular emphasis will be placed on current trends in . adolescent nutrition, and their relationships to bone health. Additionally, we propose to design and develop two interactive nutrition/health ' education activities that will allow students to apply the information provided in the Bone Biology Tutorial. In the first, students will apply constructs provided in the Bone Biology Tutorial to design "Bone Health Plans" for space travelers.

Designing Web-Based Educative Curriculum Materials for the Social Studies

ERIC Educational Resources Information Center

Callahan, Cory; Saye, John; Brush, Thomas

2013-01-01

This paper reports on a design experiment of web-based curriculum materials explicitly created to help social studies teachers develop their professional teaching knowledge. Web-based social studies curriculum reform efforts, human-centered interface design, and investigations into educative curriculum materials are reviewed, as well as…

Design of customer knowledge management system for Aglaonema Nursery in South Tangerang, Indonesia

NASA Astrophysics Data System (ADS)

Sugiarto, D.; Mardianto, I.; Dewayana, TS; Khadafi, M.

2017-12-01

The purpose of this paper is to describe the design of customer knowledge management system to support customer relationship management activities for an aglaonema nursery in South Tangerang, Indonesia. System. The steps were knowledge identification (knowledge about customer, knowledge from customer, knowledge for customer), knowledge capture, codification, analysis of system requirement and create use case and activity diagram. The result showed that some key knowledge were about supporting customer in plant care (know how) and types of aglaonema including with the prices (know what). That knowledge for customer then codified and shared in knowledge portal website integrated with social media. Knowledge about customer were about customers and their behaviour in purchasing aglaonema. Knowledge from customer were about feedback, favorite and customer experience. Codified knowledge were placed and shared using content management system based on wordpress.

Targeted drug delivery using genetically engineered diatom biosilica.

PubMed

Delalat, Bahman; Sheppard, Vonda C; Rasi Ghaemi, Soraya; Rao, Shasha; Prestidge, Clive A; McPhee, Gordon; Rogers, Mary-Louise; Donoghue, Jacqueline F; Pillay, Vinochani; Johns, Terrance G; Kröger, Nils; Voelcker, Nicolas H

2015-11-10

The ability to selectively kill cancerous cell populations while leaving healthy cells unaffected is a key goal in anticancer therapeutics. The use of nanoporous silica-based materials as drug-delivery vehicles has recently proven successful, yet production of these materials requires costly and toxic chemicals. Here we use diatom microalgae-derived nanoporous biosilica to deliver chemotherapeutic drugs to cancer cells. The diatom Thalassiosira pseudonana is genetically engineered to display an IgG-binding domain of protein G on the biosilica surface, enabling attachment of cell-targeting antibodies. Neuroblastoma and B-lymphoma cells are selectively targeted and killed by biosilica displaying specific antibodies sorbed with drug-loaded nanoparticles. Treatment with the same biosilica leads to tumour growth regression in a subcutaneous mouse xenograft model of neuroblastoma. These data indicate that genetically engineered biosilica frustules may be used as versatile 'backpacks' for the targeted delivery of poorly water-soluble anticancer drugs to tumour sites.

Evaluation of the efficacy of lambda-cyhalothrin applied as ultra-low volume and thermal fog for emergency control of Aedes aegypti in Honduras.

PubMed

Perich, M J; Sherman, C; Burge, R; Gill, E; Quintana, M; Wirtz, R A

2001-12-01

An extended-duration formulation of lambda-cyhalothrin (Demand CS) applied as either an ultra-low volume (ULV) or thermal fog spray from a new handheld sprayer (Terrier) against Aedes aegypti was evaluated in Honduras. Spray applications were made at the front door for 1 min or to each room for 15 sec, both for the ULV and thermal fog applications to houses in separate blocks for each treatment. The efficacy and duration of effectiveness of the spray was determined from sentinel caged mosquito mortality and collection of mosquitoes within houses with a backpack power aspirator. Sentinel caged mosquito mortality in both open and sequestered locations was 97-100% for all spray treatments, with control mortality less than 2%. Both ULV applications (front door and each room) provided 4 wk of significant control (P < 0.01) based on adult Ae. aegypti house collections.

An expert system for choosing the best combination of options in a general purpose program for automated design synthesis

NASA Technical Reports Server (NTRS)

Rogers, J. L.; Barthelemy, J.-F. M.

1986-01-01

An expert system called EXADS has been developed to aid users of the Automated Design Synthesis (ADS) general purpose optimization program. ADS has approximately 100 combinations of strategy, optimizer, and one-dimensional search options from which to choose. It is difficult for a nonexpert to make this choice. This expert system aids the user in choosing the best combination of options based on the users knowledge of the problem and the expert knowledge stored in the knowledge base. The knowledge base is divided into three categories; constrained problems, unconstrained problems, and constrained problems being treated as unconstrained problems. The inference engine and rules are written in LISP, contains about 200 rules, and executes on DEC-VAX (with Franz-LISP) and IBM PC (with IQ-LISP) computers.

Research and application of knowledge resources network for product innovation.

PubMed

Li, Chuan; Li, Wen-qiang; Li, Yan; Na, Hui-zhen; Shi, Qian

2015-01-01

In order to enhance the capabilities of knowledge service in product innovation design service platform, a method of acquiring knowledge resources supporting for product innovation from the Internet and providing knowledge active push is proposed. Through knowledge modeling for product innovation based on ontology, the integrated architecture of knowledge resources network is put forward. The technology for the acquisition of network knowledge resources based on focused crawler and web services is studied. Knowledge active push is provided for users by user behavior analysis and knowledge evaluation in order to improve users' enthusiasm for participation in platform. Finally, an application example is illustrated to prove the effectiveness of the method.

A flexible telerobotic system for space operations

NASA Technical Reports Server (NTRS)

Sliwa, N. O.; Will, R. W.

1987-01-01

The objective and design of a proposed goal-oriented knowledge-based telerobotic system for space operations is described. This design effort encompasses the elements of the system executive and user interface and the distribution and general structure of the knowledge base, the displays, and the task sequencing. The objective of the design effort is to provide an expandable structure for a telerobotic system that provides cooperative interaction between the human operator and computer control. The initial phase of the implementation provides a rule-based, goal-oriented script generator to interface to the existing control modes of a telerobotic research system, in the Intelligent Systems Research Lab at NASA Research Center.

The Study on Collaborative Manufacturing Platform Based on Agent

NASA Astrophysics Data System (ADS)

Zhang, Xiao-yan; Qu, Zheng-geng

To fulfill the trends of knowledge-intensive in collaborative manufacturing development, we have described multi agent architecture supporting knowledge-based platform of collaborative manufacturing development platform. In virtue of wrapper service and communication capacity agents provided, the proposed architecture facilitates organization and collaboration of multi-disciplinary individuals and tools. By effectively supporting the formal representation, capture, retrieval and reuse of manufacturing knowledge, the generalized knowledge repository based on ontology library enable engineers to meaningfully exchange information and pass knowledge across boundaries. Intelligent agent technology increases traditional KBE systems efficiency and interoperability and provides comprehensive design environments for engineers.

A knowledge based system for scientific data visualization

NASA Technical Reports Server (NTRS)

Senay, Hikmet; Ignatius, Eve

1992-01-01

A knowledge-based system, called visualization tool assistant (VISTA), which was developed to assist scientists in the design of scientific data visualization techniques, is described. The system derives its knowledge from several sources which provide information about data characteristics, visualization primitives, and effective visual perception. The design methodology employed by the system is based on a sequence of transformations which decomposes a data set into a set of data partitions, maps this set of partitions to visualization primitives, and combines these primitives into a composite visualization technique design. Although the primary function of the system is to generate an effective visualization technique design for a given data set by using principles of visual perception the system also allows users to interactively modify the design, and renders the resulting image using a variety of rendering algorithms. The current version of the system primarily supports visualization techniques having applicability in earth and space sciences, although it may easily be extended to include other techniques useful in other disciplines such as computational fluid dynamics, finite-element analysis and medical imaging.

How Knowledge Organizations Work: The Case of Detectives

ERIC Educational Resources Information Center

Gottschalk, Petter; Holgersson, Stefan; Karlsen, Jan Terje

2009-01-01

Purpose: The purpose of this paper is to conceptualize detectives in police investigations as knowledge workers. Design/methodology/approach: The paper is based on a literature review covering knowledge organizations, police organizations, police investigations, and detectives as knowledge workers. Findings: The paper finds that the changing role…

Project-Based Learning and Student Knowledge Construction during Asynchronous Online Discussion

ERIC Educational Resources Information Center

Koh, Joyce Hwee Ling; Herring, Susan C.; Hew, Khe Foon

2010-01-01

Project-based learning engages students in problem solving through artefact design. However, previous studies of online project-based learning have focused primarily on the dynamics of online collaboration; students' knowledge construction throughout this process has not been examined thoroughly. This case study analyzed the relationship between…

From science to action: Principles for undertaking environmental research that enables knowledge exchange and evidence-based decision-making.

PubMed

Cvitanovic, C; McDonald, J; Hobday, A J

2016-12-01

Effective conservation requires knowledge exchange among scientists and decision-makers to enable learning and support evidence-based decision-making. Efforts to improve knowledge exchange have been hindered by a paucity of empirically-grounded guidance to help scientists and practitioners design and implement research programs that actively facilitate knowledge exchange. To address this, we evaluated the Ningaloo Research Program (NRP), which was designed to generate new scientific knowledge to support evidence-based decisions about the management of the Ningaloo Marine Park in north-western Australia. Specifically, we evaluated (1) outcomes of the NRP, including the extent to which new knowledge informed management decisions; (2) the barriers that prevented knowledge exchange among scientists and managers; (3) the key requirements for improving knowledge exchange processes in the future; and (4) the core capacities that are required to support knowledge exchange processes. While the NRP generated expansive and multidisciplinary science outputs directly relevant to the management of the Ningaloo Marine Park, decision-makers are largely unaware of this knowledge and little has been integrated into decision-making processes. A range of barriers prevented efficient and effective knowledge exchange among scientists and decision-makers including cultural differences among the groups, institutional barriers within decision-making agencies, scientific outputs that were not translated for decision-makers and poor alignment between research design and actual knowledge needs. We identify a set of principles to be implemented routinely as part of any applied research program, including; (i) stakeholder mapping prior to the commencement of research programs to identify all stakeholders, (ii) research questions to be co-developed with stakeholders, (iii) implementation of participatory research approaches, (iv) use of a knowledge broker, and (v) tailored knowledge management systems. Finally, we articulate the individual, institutional and financial capacities that must be developed to underpin successful knowledge exchange strategies. Copyright © 2016 The Authors. Published by Elsevier Ltd.. All rights reserved.

Online epistemic communities: theoretical and methodological directions for understanding knowledge co-elaboration in new digital spaces.

PubMed

Détienne, Françoise; Barcellini, Flore; Baker, Michael; Burkhardt, Jean-Marie; Fréard, Dominique

2012-01-01

This paper presents, illustrates and discusses a generic framework for studying knowledge co-elaboration in online epistemic communities ("OECs"). Our approach is characterised by: considering knowledge co-elaboration as a design activity; distinguishing discussion and production spaces in OECs; characterising participation via the notion of role; fine-grained analyses of meaning, content and communicative functions in interactions. On this basis, three key issues for ergonomics research on OECs are discussed and illustrated by results from our previous studies on OSS and Wikipedia. One issue concerns the interrelation between design (task) and regulation. Whereas design task-oriented activity is distributed among participants, we illustrate that OCEs function with specialised emerging roles of group regulation. However, the task-oriented activity also functions at an interpersonal level, as an interplay of knowledge-based discussion with negotiation of competencies. Another issue concerns the foci of activity on the (designed) knowledge object. Based on a generic task model, we illustrate asymmetry and distinctiveness in tasks' foci of participants. The last issue concerns how design-use mediation is ensured by specific forms of mediation roles in OECs. Finally we discuss the degree of generality of our framework and draw some perspectives for extending our framework to other OECs.

Effects of Gender, Load, and Backpack on the Temporal and Kinematic Characteristics of Walking Gait. Volume 3

DTIC Science & Technology

1982-04-01

TEeHNICAt LIBRARY U.S. ARMY NATICK R & Q LABORAIOltlfJ NATICK, MA 01760 BY PWLIP E. MARTIN AND RICHARD C. NELSON BIOMECHANICS LABORATORY THE...ELEMENT, PROJECT, TASK AREA & WORK UNIT NUMBERS Biomechanics Laboratory 62, 9p05 The Pennsylvania State University 6.2 University Park, Pennsylvania 16802...SUMMARY AND RECOMMENDATIONS 37 3 TABLE OF CONTENTS (continued) Page REFERENCES 39 APPENDICES A. Clothing and Equipment Used in This Study 41 B. ANOVA

Visible-Near Infrared (VNIR) and Shortwave Infrared (SWIR) Spectral Variability of Urban Materials

DTIC Science & Technology

2013-03-01

extension). FieldSpec 4 spectrometer unit is contained in the backpack. The fiber optic cable and power cable for the contact probe are seen...spectroradiometer foreoptic (lens) is typically between 1 degree and 25 degrees when using natural lighting (or artificially lit in lab) but a bare fiber ... fiber optic cable and power cable for the contact probe are seen. In operation, the spectrometer is allowed to warm up prior to use for at least 30

A low-cost multichannel wireless neural stimulation system for freely roaming animals

NASA Astrophysics Data System (ADS)

Alam, Monzurul; Chen, Xi; Fernandez, Eduardo

2013-12-01

Objectives. Electrical stimulation of nerve tissue and recording of neural activity are the basis of many therapies and neural prostheses. Conventional stimulation systems have a number of practical limitations, especially in experiments involving freely roaming subjects. Our main objective was to develop a modular, versatile and inexpensive multichannel wireless system able to overcome some of these constraints. Approach. We have designed and implemented a new multichannel wireless neural stimulator based on commercial components. The system is small (2 cm × 4 cm × 0.5 cm) and light in weight (9 g) which allows it to be easily carried in a small backpack. To test and validate the performance and reliability of the whole system we conducted several bench tests and in vivo experiments. Main results. The performance and accuracy of the stimulator were comparable to commercial threaded systems. Stimulation sequences can be constructed on-the-fly with 251 selectable current levels (from 0 to 250 µA) with 1 µA step resolution. The pulse widths and intervals can be as long as 65 ms in 2 µs time resolution. The system covers approximately 10 m of transmission range in a regular laboratory environment and 100 m in free space (line of sight). Furthermore it provides great flexibility for experiments since it allows full control of the stimulator and the stimulation parameters in real time. When there is no stimulation, the device automatically goes into low-power sleep mode to preserve battery power. Significance. We introduce the design of a powerful multichannel wireless stimulator assembled from commercial components. Key features of the system are their reliability, robustness and small size. The system has a flexible design that can be modified straightforwardly to tailor it to any specific experimental need. Furthermore it can be effortlessly adapted for use with any kind of multielectrode arrays.

Artificial Intelligence Techniques: Applications for Courseware Development.

ERIC Educational Resources Information Center

Dear, Brian L.

1986-01-01

Introduces some general concepts and techniques of artificial intelligence (natural language interfaces, expert systems, knowledge bases and knowledge representation, heuristics, user-interface metaphors, and object-based environments) and investigates ways these techniques might be applied to analysis, design, development, implementation, and…

Awareness and Need for Knowledge of Health and Safety among Dairy Farmers Interviewed in Uganda.

PubMed

Lunner-Kolstrup, Christina; Ssali, Tonny Kiggundu

2016-01-01

Safe working conditions are essential for healthy living and for ensuring food security among farmers and farm communities in developing countries. There is limited research on this topic, and documentation is essential to understand and change patterns of human health and safety. In May 2014, six male and female farmers on four dairy farms in Uganda and a female veterinarian were interviewed about their awareness and attitudes to agricultural risk factors, health, and safety. In addition, transect walks were conducted on the four dairy farms. The dairy farmers reported health and safety concerns, e.g., diarrhea, coughs, fever, cuts while using machetes in plantations, bruises when handling animals, and dizziness and poisoning symptoms from using different agrochemicals, and considered these an occupational hazard. The most important topic mentioned was the use of agrochemicals and drugs on livestock. The farmers spray their animals with insecticides to prevent ticks, lice, tsetse flies, and other biting nuisance flies, using a backpack or hand sprayer. Spraying is conducted without personal protection equipment, which is considered too expensive and difficult to obtain. The farmers reported that they usually feel dizzy, vomit, and have pain and a burning feeling in their face and eyes after spraying. The symptoms are sometimes so severe that they require treatment. In such cases, the farmers buy medication without a prescription at the local drugstore, where the storekeeper often has limited or no knowledge of agrochemicals or drugs except for dosage. Agricultural health and safety training in the region is non-existent, and the farmers expressed a need and desire for improvements in this area. The level of knowledge and awareness of agricultural health and safety risks, disease, and injury prevention among the Ugandan dairy farmers interviewed was low. The farmers mentioned few agriculture-related complaints, injuries, or diseases except poisoning from using agrochemicals. Training on health and safety in Ugandan agriculture is urgently needed.

Model-based software design

NASA Technical Reports Server (NTRS)

Iscoe, Neil; Liu, Zheng-Yang; Feng, Guohui; Yenne, Britt; Vansickle, Larry; Ballantyne, Michael

1992-01-01

Domain-specific knowledge is required to create specifications, generate code, and understand existing systems. Our approach to automating software design is based on instantiating an application domain model with industry-specific knowledge and then using that model to achieve the operational goals of specification elicitation and verification, reverse engineering, and code generation. Although many different specification models can be created from any particular domain model, each specification model is consistent and correct with respect to the domain model.

Subjective knowledge and fear appeal effectiveness: implications for message design.

PubMed

Nabi, Robin L; Roskos-Ewoldsen, David; Carpentier, Francesca Dillman

2008-01-01

This research investigates the role of perceived health knowledge on the effectiveness of fear-based persuasive appeals. Undergraduates (N = 263) read a strong fear, weak fear, or efficacy-only message encouraging breast or testicular self-examination. As expected, results indicated that men high in subjective knowledge were less reactant and more persuaded by the efficacy-only message whereas those low in subjective knowledge did not evidence this pattern. Contrary to expectation, women high in subjective knowledge had comparable reactions to each of the 3 messages. Implications for fear appeal theory and message design are discussed.

Schools as Knowledge-Building Organizations: Thirty Years of Design Research

ERIC Educational Resources Information Center

Chen, Bodong; Hong, Huang-Yao

2016-01-01

In this article we review the Knowledge-Building literature, unpacking its conceptual framework, principle-based pedagogy, distinctive features, and issues regarding scalability and sustainability. The Knowledge-Building goal is to reframe education as a knowledge-creating enterprise, engaging students from the earliest years of schooling. Despite…

SHRIF, a General-Purpose System for Heuristic Retrieval of Information and Facts, Applied to Medical Knowledge Processing.

ERIC Educational Resources Information Center

Findler, Nicholas V.; And Others

1992-01-01

Describes SHRIF, a System for Heuristic Retrieval of Information and Facts, and the medical knowledge base that was used in its development. Highlights include design decisions; the user-machine interface, including the language processor; and the organization of the knowledge base in an artificial intelligence (AI) project like this one. (57…

Evidence-Based Administration for Decision Making in the Framework of Knowledge Strategic Management

ERIC Educational Resources Information Center

Del Junco, Julio Garcia; Zaballa, Rafael De Reyna; de Perea, Juan Garcia Alvarez

2010-01-01

Purpose: This paper seeks to present a model based on evidence-based administration (EBA), which aims to facilitate the creation, transformation and diffusion of knowledge in learning organizations. Design/methodology/approach: A theoretical framework is proposed based on EBA and the case method. Accordingly, an empirical study was carried out in…

Evaluating an education/training module to foster knowledge of cockpit weather technology.

PubMed

Cobbett, Erin A; Blickensderfer, Elizabeth L; Lanicci, John

2014-10-01

Previous research has indicated that general aviation (GA) pilots may use the sophisticated meteorological information available to them via a variety of Next-Generation Weather Radar (NEXRAD) based weather products in a manner that actually decreases flight safety. The current study examined an education/training method designed to enable GA pilots to use NEXRAD-based products effectively in convective weather situations. The training method was lecture combined with paper-based scenario exercises. A multivariate analysis of variance revealed that subjects in the training condition performed significantly better than did subjects in the control condition on several knowledge and attitude measures. Subjects in the training condition improved from a mean score of 66% to 80% on the radar-knowledge test and from 62% to 75% on the scenario-knowledge test. Although additional research is needed, these results demonstrated that pilots can benefit from a well-designed education/training program involving specific areas of aviation weather-related knowledge.

Knowledge acquisition in the fuzzy knowledge representation framework of a medical consultation system.

PubMed

Boegl, Karl; Adlassnig, Klaus-Peter; Hayashi, Yoichi; Rothenfluh, Thomas E; Leitich, Harald

2004-01-01

This paper describes the fuzzy knowledge representation framework of the medical computer consultation system MedFrame/CADIAG-IV as well as the specific knowledge acquisition techniques that have been developed to support the definition of knowledge concepts and inference rules. As in its predecessor system CADIAG-II, fuzzy medical knowledge bases are used to model the uncertainty and the vagueness of medical concepts and fuzzy logic reasoning mechanisms provide the basic inference processes. The elicitation and acquisition of medical knowledge from domain experts has often been described as the most difficult and time-consuming task in knowledge-based system development in medicine. It comes as no surprise that this is even more so when unfamiliar representations like fuzzy membership functions are to be acquired. From previous projects we have learned that a user-centered approach is mandatory in complex and ill-defined knowledge domains such as internal medicine. This paper describes the knowledge acquisition framework that has been developed in order to make easier and more accessible the three main tasks of: (a) defining medical concepts; (b) providing appropriate interpretations for patient data; and (c) constructing inferential knowledge in a fuzzy knowledge representation framework. Special emphasis is laid on the motivations for some system design and data modeling decisions. The theoretical framework has been implemented in a software package, the Knowledge Base Builder Toolkit. The conception and the design of this system reflect the need for a user-centered, intuitive, and easy-to-handle tool. First results gained from pilot studies have shown that our approach can be successfully implemented in the context of a complex fuzzy theoretical framework. As a result, this critical aspect of knowledge-based system development can be accomplished more easily.

The application of SSADM to modelling the logical structure of proteins.

PubMed

Saldanha, J; Eccles, J

1991-10-01

A logical design that describes the overall structure of proteins, together with a more detailed design describing secondary and some supersecondary structures, has been constructed using the computer-aided software engineering (CASE) tool, Auto-mate. Auto-mate embodies the philosophy of the Structured Systems Analysis and Design Method (SSADM) which enables the logical design of computer systems. Our design will facilitate the building of large information systems, such as databases and knowledgebases in the field of protein structure, by the derivation of system requirements from our logical model prior to producing the final physical system. In addition, the study has highlighted the ease of employing SSADM as a formalism in which to conduct the transferral of concepts from an expert into a design for a knowledge-based system that can be implemented on a computer (the knowledge-engineering exercise). It has been demonstrated how SSADM techniques may be extended for the purpose of modelling the constituent Prolog rules. This facilitates the integration of the logical system design model with the derived knowledge-based system.

Knowledge-based support for the participatory design and implementation of shift systems.

PubMed

Gissel, A; Knauth, P

1998-01-01

This study developed a knowledge-based software system to support the participatory design and implementation of shift systems as a joint planning process including shift workers, the workers' committee, and management. The system was developed using a model-based approach. During the 1st phase, group discussions were repeatedly conducted with 2 experts. Thereafter a structure model of the process was generated and subsequently refined by the experts in additional semistructured interviews. Next, a factual knowledge base of 1713 relevant studies was collected on the effects of shift work. Finally, a prototype of the knowledge-based system was tested on 12 case studies. During the first 2 phases of the system, important basic information about the tasks to be carried out is provided for the user. During the 3rd phase this approach uses the problem-solving method of case-based reasoning to determine a shift rota which has already proved successful in other applications. It can then be modified in the 4th phase according to the shift workers' preferences. The last 2 phases support the final testing and evaluation of the system. The application of this system has shown that it is possible to obtain shift rotas suitable to actual problems and representative of good ergonomic solutions. A knowledge-based approach seems to provide valuable support for the complex task of designing and implementing a new shift system. The separation of the task into several phases, the provision of information at all stages, and the integration of all parties concerned seem to be essential factors for the success of the application.

Evaluation Criteria for Competency-Based Syllabi: A Chilean Case Study Applying Mixed Methods

ERIC Educational Resources Information Center

Jerez, Oscar; Valenzuela, Leslier; Pizarro, Veronica; Hasbun, Beatriz; Valenzuela, Gabriela; Orsini, Cesar

2016-01-01

In recent decades, higher education institutions worldwide have been moving from knowledge-based to competence-based curricula. One of the greatest challenges in this transition is the difficulty in changing the knowledge-oriented practices of teachers. This study evaluates the consistency between syllabus design and the requirements imposed by a…

Research and Application of Knowledge Resources Network for Product Innovation

PubMed Central

Li, Chuan; Li, Wen-qiang; Li, Yan; Na, Hui-zhen; Shi, Qian

2015-01-01

In order to enhance the capabilities of knowledge service in product innovation design service platform, a method of acquiring knowledge resources supporting for product innovation from the Internet and providing knowledge active push is proposed. Through knowledge modeling for product innovation based on ontology, the integrated architecture of knowledge resources network is put forward. The technology for the acquisition of network knowledge resources based on focused crawler and web services is studied. Knowledge active push is provided for users by user behavior analysis and knowledge evaluation in order to improve users' enthusiasm for participation in platform. Finally, an application example is illustrated to prove the effectiveness of the method. PMID:25884031

Field-based education and indigenous knowledge: Essential components of geoscience education for native American communities

NASA Astrophysics Data System (ADS)

Riggs, Eric M.

2005-03-01

The purpose of this study is to propose a framework drawing on theoretical and empirical science education research that explains the common prominent field-based components of the handful of persistent and successful Earth science education programs designed for indigenous communities in North America. These programs are primarily designed for adult learners, either in a postsecondary or in a technical education setting and all include active collaboration between local indigenous communities and geoscientists from nearby universities. Successful Earth science curricula for indigenous learners share in common an explicit emphasis on outdoor education, a place and problem-based structure, and the explicit inclusion of traditional indigenous knowledge in the instruction. Programs sharing this basic design have proven successful and popular for a wide range of indigenous cultures across North America. We present an analysis of common field-based elements to yield insight into indigenous Earth science education. We provide an explanation for the success of this design based in research on field-based learning, Native American learning styles research, and theoretical and empirical research into the nature and structure of indigenous knowledge. We also provide future research directions that can test and further refine our understanding of best practices in indigenous Earth science education.

Development of a Design Supporting System for Nano-Materials based on a Framework for Integrated Knowledge of Functioning-Manufacturing Process

NASA Astrophysics Data System (ADS)

Tarumi, Shinya; Kozaki, Kouji; Kitamura, Yoshinobu; Mizoguchi, Riichiro

In the recent materials research, much work aims at realization of ``functional materials'' by changing structure and/or manufacturing process with nanotechnology. However, knowledge about the relationship among function, structure and manufacturing process is not well organized. So, material designers have to consider a lot of things at the same time. It would be very helpful for them to support their design process by a computer system. In this article, we discuss a conceptual design supporting system for nano-materials. Firstly, we consider a framework for representing functional structures and manufacturing processes of nano-materials with relationships among them. We expand our former framework for representing functional knowledge based on our investigation through discussion with experts of nano-materials. The extended framework has two features: 1) it represents functional structures and manufacturing processes comprehensively, 2) it expresses parameters of function and ways with their dependencies because they are important for material design. Next, we describe a conceptual design support system we developed based on the framework with its functionalities. Lastly, we evaluate the utility of our system in terms of functionality for design supports. For this purpose, we tried to represent two real examples of material design. And then we did an evaluation experiment on conceptual design of material using our system with the collaboration of domain experts.

Designing Social Media for Informal Learning and Knowledge Maturing in the Digital Workplace

ERIC Educational Resources Information Center

Ravenscroft, A.; Schmidt, A.; Cook, J.; Bradley, C.

2012-01-01

This paper presents an original approach to designing social media that support informal learning in the digital workplace. It adapts design-based research to take into account the embeddedness of interactions within digitally mediated work-based contexts. The approach is demonstrated through the design, implementation, and evaluation of software…

The Progress of Theory in Knowledge Organization.

ERIC Educational Resources Information Center

Smiraglia, Richard P.

2002-01-01

Presents a background on theory in knowledge organization, which has moved from an epistemic stance of pragmatism and rationalism (based on observation of the construction of retrieval tools), to empiricism (based on the results of empirical research). Discusses historicism, external validity, classification, user-interface design, and…

The use of engineering design scenarios to assess student knowledge of global, societal, economic, and environmental contexts

NASA Astrophysics Data System (ADS)

McKenna, Ann F.; Hynes, Morgan M.; Johnson, Amy M.; Carberry, Adam R.

2016-07-01

Product archaeology as an educational approach asks engineering students to consider and explore the broader societal and global impacts of a product's manufacturing, distribution, use, and disposal on people, economics, and the environment. This study examined the impact of product archaeology in a project-based engineering design course on student attitudes and perceptions about engineering and abilities to extend and refine knowledge about broader contexts. Two design scenarios were created: one related to dental hygiene and one related to vaccination delivery. Design scenarios were used to (1) assess knowledge of broader contexts, and (2) test variability of student responses across different contextual situations. Results from pre- to post-surveying revealed improved student perceptions of knowledge of broader contexts. Significant differences were observed between the two design scenarios. The findings support the assumption that different design scenarios elicit consideration of different contexts and design scenarios can be constructed to target specific contextual considerations.

An Interactive Medical Knowledge Assistant

NASA Astrophysics Data System (ADS)

Czejdo, Bogdan D.; Baszun, Mikolaj

This paper describes an interactive medical knowledge assistant that can help a doctor or a patient in making important health related decisions. The system is Web based and consists of several modules, including a medical knowledge base, a doctor interface module, patient interface module and a the main module of the medical knowledge assistant. The medical assistant is designed to help interpret the fuzzy data using rough sets approach. The patient interface includes sub-system for real time monitoring of patients' health parameters and sending them to the main module of the medical knowledge assistant.

Design of a diagnostic encyclopaedia using AIDA.

PubMed

van Ginneken, A M; Smeulders, A W; Jansen, W

1987-01-01

Diagnostic Encyclopaedia Workstation (DEW) is the name of a digital encyclopaedia constructed to contain reference knowledge with respect to the pathology of the ovary. Comparing DEW with the common sources of reference knowledge (i.e. books) leads to the following advantages of DEW: it contains more verbal knowledge, pictures and case histories, and it offers information adjusted to the needs of the user. Based on an analysis of the structure of this reference knowledge we have chosen AIDA to develop a relational database and we use a video-disc player to contain the pictorial part of the database. The system consists of a database input version and a read-only run version. The design of the database input version is discussed. Reference knowledge for ovary pathology requires 1-3 Mbytes of memory. At present 15% of this amount is available. The design of the run version is based on an analysis of which information must necessarily be specified to the system by the user to access a desired item of information. Finally, the use of AIDA in constructing DEW is evaluated.

Benefit from NASA

NASA Image and Video Library

2004-04-15

Firefighters are like astronauts. They both face dangerous, even hostile environments such as a building full of fire and the vacuum of space. They are both get breathing air from tanks on their backs. Early in the 1970's, NASA began working to improve firefighter breathing systems, which had hardly changed since the 1940s. NASA's Johnson Space Center conducted a 4-year program that applied technology from the portable life support systems used by Apollo astronauts on the moon. The new breathing system is made up of an air bottle, a frame and harness, a face mask, and a warning device. The new system weighs less than 20 pounds, one-third less than the old gear. The new air bottle provides 30 minutes of breathing air, as much as the old system. Like a good hiker's backpack, the new system puts the weight on the firefighter's hips rather than the shoulders. The face mask provides better visibility and the warning device lets the firefighter know when air in the bottle is low. Though they have made many design modifications and refinements, manufacturers of breathing apparatus still incorporate the original NASA technology.

Lithium-Ion Battery Demonstrated for NASA Desert Research and Technology Studies

NASA Technical Reports Server (NTRS)

Bennett, William R.; Baldwin, Richard S.

2008-01-01

Lithium-ion batteries have attractive performance characteristics that are well suited to a number of NASA applications. These rechargeable batteries produce compact, lightweight energy-storage systems with excellent cycle life, high charge/discharge efficiency, and low self-discharge rate. NASA Glenn Research Center's Electrochemistry Branch designed and produced five lithium-ion battery packs configured to power the liquid-air backpack (LAB) on spacesuit simulators. The demonstration batteries incorporated advanced, NASA-developed electrolytes with enhanced low-temperature performance characteristics. The objectives of this effort were to (1) demonstrate practical battery performance under field-test conditions and (2) supply laboratory performance data under controlled laboratory conditions. Advanced electrolyte development is being conducted under the Exploration Technology Development Program by the NASA Jet Propulsion Laboratory. Three field trials were successfully completed at Cinder Lake from September 10 to 12, 2007. Extravehicular activities of up to 1 hr and 50 min were supported, with residual battery capacity sufficient for 30 min of additional run time. Additional laboratory testing of batteries and cells is underway at Glenn s Electrochemical Branch.

Research-design model for professional development of teachers: Designing lessons with physics education research

NASA Astrophysics Data System (ADS)

Eylon, Bat-Sheva; Bagno, Esther

2006-12-01

How can one increase the awareness of teachers to the existence and importance of knowledge gained through physics education research (PER) and provide them with capabilities to use it? How can one enrich teachers’ physics knowledge and the related pedagogical content knowledge of topics singled out by PER? In this paper we describe a professional development model that attempts to respond to these needs. We report on a study of the model’s implementation in a program for 22 high-school experienced physics teachers. In this program teachers (in teams of 5-6) developed during a year and a half (about 330h ), several lessons (minimodules) dealing with a topic identified as problematic by PER. The teachers employed a systematic research-based approach and used PER findings. The program consisted of three stages, each culminating with a miniconference: 1. Defining teaching and/or learning goals based on content analysis and diagnosis of students’ prior knowledge. 2. Designing the lessons using PER-based instructional strategies. 3. Performing a small-scale research study that accompanies the development process and publishing the results. We describe a case study of one of the groups and bring evidence that demonstrates how the workshop advanced: (a) Teachers’ awareness of deficiencies in their own knowledge of physics and pedagogy, and their perceptions about their students’ knowledge; (b) teachers’ knowledge of physics and physics pedagogy; (c) a systematic research-based approach to the design of lessons; (d) the formation of a community of practice; and (e) acquaintance with central findings of PER. There was a clear effect on teachers’ practice in the context of the study as indicated by the materials brought to the workshop. The teachers also reported that they continued to use the insights gained, mainly in the topics that were investigated by themselves and by their peers.

Sports and Recreation

NASA Technical Reports Server (NTRS)

1977-01-01

Among a number of solar energy tests being jointly conducted by NASA's Lewis Research Center and the Energy Research and Development Administration are a sun-powered refrigerator and a back-pack mounted power supply for radios. Both use solar cells, spacecraft power sources which convert sun energy into electricity. The refrigerator, which has potential utility for outdoor campers, is in operation at a trail construction camp in Isle Royale National Park, a remote wilderness in Michigan's Lake Superior where electricity is available only at park headquarters. Trail maintenance crews working in the back country get food supplies only once weekly; with refrigeration they can enjoy a more varied and nutritious diet. Solar cells provide power to run the refrigerator and to charge its batteries for an alternate power supply when sun is not available. At the request of Znyo National Forest personnel NASA-Lewis also developed a back-pack system. The lightweight solar cell pack (on the pack strap in photo) charges batteries for portable two-way radios used by trailguards, who are on patrol for as much as two weeks at a time. Guards want continuous communication with the District Station, but battery capacity precludes such operation. With the solar cell power supply, guards can use their radios 24 hours a day.A lightweight, higher-capacity oxygen bottle-derived from rocket propellant tank technology-proved an important aid in the 1976 ascent to the summit of Mt. Everest by members of the. American Bicentennial Everest Expedition.

Incidence and risk factors for backpack palsy in young Korean soldiers.

PubMed

Kim, Kyoung-Eun; Kim, E-J

2016-02-01

Backpack palsy (BPP) is a common aetiology of brachial plexopathy in military hospitals. We aimed to determine the incidence and risk factors of BPP in young Korean soldiers. We identified enlisted patients who were diagnosed with BPP from a review of the medical records of all the Korean military hospitals in 2011 and 2012 and investigated their clinical findings and medical study results. To identify risk factors of BPP, we also surveyed, by questionnaire, healthy recruits of a company in a training centre who had just finished night marches. We divided them according to whether they had paresthaesia and/or weakness in their arm(s) during marching and compared their characteristics. The incidence of BPP in Korean soldiers was 29.7 per 100,000 person-years (95% CI 17.2 to 24.3). Body mass index (BMI) was significantly lower in patients with BPP than it was in healthy recruits. Among healthy recruits, those who had experienced paresthaesia and/or weakness during marching had a significantly lower BMI than did those who had not. We report the incidence of BPP in young Korean soldiers. A low BMI was a risk factor for BPP. These results may be helpful in establishing a strategy for the prevention of BPP in the setting of military training. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/

Advanced worker protection system. Topical report, Phase I

DOE Office of Scientific and Technical Information (OSTI.GOV)

Myers, J.

1995-07-01

The Department of Energy (DOE) is in the process of defining the magnitude and diversity of Decontamination and Decommissioning (D&D) obligations at its numerous sites. The DOE believes that existing technologies are inadequate to solve many challenging problems such as how to decontaminate structures and equipment cost effectively, what to do with materials and wastes generated, and how to adequately protect workers and the environment. Preliminary estimates show a tremendous need for effective use of resources over a relatively long period (over 30 years). Several technologies are being investigated which can potentially reduce D&D costs while providing appropriate protection tomore » DOE workers. The DOE recognizes that traditional methods used by the EPA in hazardous waste site clean up activities are insufficient to provide the needed protection and worker productivity demanded by DOE D&D programs. As a consequence, new clothing and equipment which can adequately protect workers while providing increases in worker productivity are being sought for implementation at DOE sites. This project will result in the development of an Advanced Worker Protection System (AWPS). The AWPS will be built around a life support backpack that uses liquid air to provide cooling as well as breathing gas to the worker. The backpack will be combined with advanced protective garments, advanced liquid cooling garment, respirator, communications, and support equipment to provide improved worker protection, simplified system, maintenance, and dramatically improve worker productivity through longer duration work cycles.« less

Knowledge-based reasoning in the Paladin tactical decision generation system

NASA Technical Reports Server (NTRS)

Chappell, Alan R.

1993-01-01

A real-time tactical decision generation system for air combat engagements, Paladin, has been developed. A pilot's job in air combat includes tasks that are largely symbolic. These symbolic tasks are generally performed through the application of experience and training (i.e. knowledge) gathered over years of flying a fighter aircraft. Two such tasks, situation assessment and throttle control, are identified and broken out in Paladin to be handled by specialized knowledge based systems. Knowledge pertaining to these tasks is encoded into rule-bases to provide the foundation for decisions. Paladin uses a custom built inference engine and a partitioned rule-base structure to give these symbolic results in real-time. This paper provides an overview of knowledge-based reasoning systems as a subset of rule-based systems. The knowledge used by Paladin in generating results as well as the system design for real-time execution is discussed.

Knowledge, Attitudes, Practices and Biomonitoring of Farmers and Residents Exposed to Pesticides in Brazil

PubMed Central

Oliveira Pasiani, Juliana; Torres, Priscila; Roniery Silva, Juciê; Zago Diniz, Bruno; Dutra Caldas, Eloisa

2012-01-01

In this study, the knowledge, attitudes and practices regarding pesticide use and the levels of exposure of farmers and residents to organophosphorous and/or carbamates pesticides were evaluated in two rural settings in Brazil. A questionnaire was completed by 112 farm workers aged ≥18 years. Almost all farmers acknowledged that pesticides were potentially harmful to their health (87.5%); however, over half rarely (48.2%) or never (7.2%) used personal protective devices (PPDs). An association was found (p = 0.001) between the work regimen and the use of PPDs, with more frequent equipment use among hired laborers than those involved in family agriculture. A significant correlation (p = 0.027) was found between the reporting of adverse symptoms and the use of backpack sprayers. Mean AChE activities of farmers (n = 64) and residents (n = 18) during the exposure and non-exposure periods were significantly lower than their control groups. Mean BChE activities of farmers and residents were significantly lower than their controls during the exposure period. Among the 60 farmers that had blood samples collected in both the exposure and non-exposure (baseline) periods, 10 (16.7%) had AChE depletion of over 30% during the exposure period compared with the baseline level. Six residents living on the same farms also presented this depletion. AChE was over 30% higher than the baseline level for 19 farmers (31.7%), indicating a reboot effect. Special education programs are needed in these regions to promote the safe use of pesticides in the field to decrease the risks from exposure to pesticides for farmers, and from secondary exposure to these compounds for their families. PMID:23202670

Development of Learning Resources to Promote Knowledge Sharing in Problem Based Learning

ERIC Educational Resources Information Center

Uden, Lorna; Page, Tom

2008-01-01

Problem Based Learning offers many benefits to students' learning, however, the design and implementation of effective problem based learning (PBL) is not trivial. Central to effective implementation of PBL are the problem design and group working of the students. Design of good problems requires that the learning outcomes of the subject are…

Designing Tools for Reflection on Problem-Based Instruction and Problem-Based Instructional Design

ERIC Educational Resources Information Center

Keefer, Matthew W.; Hui, Diane; RuffusDoerr, Amy Marie

2009-01-01

The objective of this research project into teacher education was to document the collaborative development and refection on teachers' tools in a problem-based learning (PBL) program. These results were then used to design materials and formats for the transmission of this teaching knowledge to less-experienced PBL teachers. The tools were…

Designing a Knowledge Mobilization Strategy: Leading through Influence

ERIC Educational Resources Information Center

Reid, Steven

2015-01-01

As district leaders consider professional learning opportunities for educators, mobilizing new thought and actions across an entire system is a vexing challenge. Classroom-based learning may unfortunately be viewed as juxtaposed to district-based learning. It becomes essential for district leaders to develop knowledge mobilization strategies which…

The Direction of Web-based Training: A Practitioner's View.

ERIC Educational Resources Information Center

Kilby, Tim

2001-01-01

Web-based training has had achievements and disappointments as online learning has matured. Best practices include user-centered design, knowledge object structures, usability engineering, and formal evaluation. Knowledge management, peer-to-peer learning, and personal learning appliances will continue to alter the online learning landscape. (SK)

Using Knowledge-Based Systems to Support Learning of Organizational Knowledge: A Case Study

NASA Technical Reports Server (NTRS)

Cooper, Lynne P.; Nash, Rebecca L.; Phan, Tu-Anh T.; Bailey, Teresa R.

2003-01-01

This paper describes the deployment of a knowledge system to support learning of organizational knowledge at the Jet Propulsion Laboratory (JPL), a US national research laboratory whose mission is planetary exploration and to 'do what no one has done before.' Data collected over 19 weeks of operation were used to assess system performance with respect to design considerations, participation, effectiveness of communication mechanisms, and individual-based learning. These results are discussed in the context of organizational learning research and implications for practice.

A knowledge-based system for patient image pre-fetching in heterogeneous database environments--modeling, design, and evaluation.

PubMed

Wei, C P; Hu, P J; Sheng, O R

2001-03-01

When performing primary reading on a newly taken radiological examination, a radiologist often needs to reference relevant prior images of the same patient for confirmation or comparison purposes. Support of such image references is of clinical importance and may have significant effects on radiologists' examination reading efficiency, service quality, and work satisfaction. To effectively support such image reference needs, we proposed and developed a knowledge-based patient image pre-fetching system, addressing several challenging requirements of the application that include representation and learning of image reference heuristics and management of data-intensive knowledge inferencing. Moreover, the system demands an extensible and maintainable architecture design capable of effectively adapting to a dynamic environment characterized by heterogeneous and autonomous data source systems. In this paper, we developed a synthesized object-oriented entity- relationship model, a conceptual model appropriate for representing radiologists' prior image reference heuristics that are heuristic oriented and data intensive. We detailed the system architecture and design of the knowledge-based patient image pre-fetching system. Our architecture design is based on a client-mediator-server framework, capable of coping with a dynamic environment characterized by distributed, heterogeneous, and highly autonomous data source systems. To adapt to changes in radiologists' patient prior image reference heuristics, ID3-based multidecision-tree induction and CN2-based multidecision induction learning techniques were developed and evaluated. Experimentally, we examined effects of the pre-fetching system we created on radiologists' examination readings. Preliminary results show that the knowledge-based patient image pre-fetching system more accurately supports radiologists' patient prior image reference needs than the current practice adopted at the study site and that radiologists may become more efficient, consultatively effective, and better satisfied when supported by the pre-fetching system than when relying on the study site's pre-fetching practice.

Ambulatory Morning Report: A Case-Based Method of Teaching EBM Through Experiential Learning.

PubMed

Luciano, Gina L; Visintainer, Paul F; Kleppel, Reva; Rothberg, Michael B

2016-02-01

Evidence-based medicine (EBM) skills are important to daily practice, but residents generally feel unskilled incorporating EBM into practice. The Kolb experiential learning theory, as applied to curricular planning, offers a unique methodology to help learners build an EBM skill set based on clinical experiences. We sought to blend the learner-centered, case-based merits of the morning report with an experientially based EBM curriculum. We describe and evaluate a patient-centered ambulatory morning report combining the User's Guides to the Medical Literature approach to EBM and experiential learning theory in the internal medicine department at Baystate Medical Center. The Kolb experiential learning theory postulates that experience transforms knowledge; within that premise we designed a curriculum to build EBM skills incorporating residents' patient encounters. By developing structured clinical questions based on recent clinical problems, residents activate prior knowledge. Residents acquire new knowledge through selection and evaluation of an article that addresses the structured clinical questions. Residents then apply and use new knowledge in future patient encounters. To assess the curriculum, we designed an 18-question EBM test, which addressed applied knowledge and EBM skills based on the User's Guides approach. Of the 66 residents who could participate in the curriculum, 61 (92%) completed the test. There was a modest improvement in EBM knowledge, primarily during the first year of training. Our experiential curriculum teaches EBM skills essential to clinical practice. The curriculum differs from traditional EBM curricula in that ours blends experiential learning with an EBM skill set; learners use new knowledge in real time.

Development of hybrid lifecycle cost estimating tool (HLCET) for manufacturing influenced design tradeoff

NASA Astrophysics Data System (ADS)

Sirirojvisuth, Apinut

In complex aerospace system design, making an effective design decision requires multidisciplinary knowledge from both product and process perspectives. Integrating manufacturing considerations into the design process is most valuable during the early design stages since designers have more freedom to integrate new ideas when changes are relatively inexpensive in terms of time and effort. Several metrics related to manufacturability are cost, time, and manufacturing readiness level (MRL). Yet, there is a lack of structured methodology that quantifies how changes in the design decisions impact these metrics. As a result, a new set of integrated cost analysis tools are proposed in this study to quantify the impacts. Equally important is the capability to integrate this new cost tool into the existing design methodologies without sacrificing agility and flexibility required during the early design phases. To demonstrate the applicability of this concept, a ModelCenter environment is used to develop software architecture that represents Integrated Product and Process Development (IPPD) methodology used in several aerospace systems designs. The environment seamlessly integrates product and process analysis tools and makes effective transition from one design phase to the other while retaining knowledge gained a priori. Then, an advanced cost estimating tool called Hybrid Lifecycle Cost Estimating Tool (HLCET), a hybrid combination of weight-, process-, and activity-based estimating techniques, is integrated with the design framework. A new weight-based lifecycle cost model is created based on Tailored Cost Model (TCM) equations [3]. This lifecycle cost tool estimates the program cost based on vehicle component weights and programmatic assumptions. Additional high fidelity cost tools like process-based and activity-based cost analysis methods can be used to modify the baseline TCM result as more knowledge is accumulated over design iterations. Therefore, with this concept, the additional manufacturing knowledge can be used to identify a more accurate lifecycle cost and facilitate higher fidelity tradeoffs during conceptual and preliminary design. Advanced Composite Cost Estimating Model (ACCEM) is employed as a process-based cost component to replace the original TCM result of the composite part production cost. The reason for the replacement is that TCM estimates production costs from part weights as a result of subtractive manufacturing of metallic origin such as casting, forging, and machining processes. A complexity factor can sometimes be adjusted to reflect different types of metal and machine settings. The TCM assumption, however, gives erroneous results when applied to additive processes like those of composite manufacturing. Another innovative aspect of this research is the introduction of a work measurement technique called Maynard Operation Sequence Technique (MOST) to be used, similarly to Activity-Based Costing (ABC) approach, to estimate manufacturing time of a part by virtue of breaking down the operations occurred during its production. ABC allows a realistic determination of cost incurred in each activity, as opposed to using a traditional method of time estimation by analogy or using response surface equations from historical process data. The MOST concept provides a tailored study of an individual process typically required for a new, innovative design. Nevertheless, the MOST idea has some challenges, one of which is its requirement to build a new process from ground up. The process development requires a Subject Matter Expertise (SME) in manufacturing method of the particular design. The SME must have also a comprehensive understanding of the MOST system so that the correct parameters are chosen. In practice, these knowledge requirements may demand people from outside of the design discipline and a priori training of MOST. To relieve the constraint, this study includes an entirely new sub-system architecture that comprises 1) a knowledge-based system to provide the required knowledge during the process selection; and 2) a new user-interface to guide the parameter selection when building the process using MOST. Also included in this study is the demonstration of how the HLCET and its constituents can be integrated with a Georgia Tech' Integrated Product and Process Development (IPPD) methodology. The applicability of this work will be shown through a complex aerospace design example to gain insights into how manufacturing knowledge helps make better design decisions during the early stages. The setup process is explained with an example of its utility demonstrated in a hypothetical fighter aircraft wing redesign. The evaluation of the system effectiveness against existing methodologies is illustrated to conclude the thesis.

Knowledge Assisted Integrated Design of a Component and Its Manufacturing Process

NASA Astrophysics Data System (ADS)

Gautham, B. P.; Kulkarni, Nagesh; Khan, Danish; Zagade, Pramod; Reddy, Sreedhar; Uppaluri, Rohith

Integrated design of a product and its manufacturing processes would significantly reduce the total cost of the products as well as the cost of its development. However this would only be possible if we have a platform that allows us to link together simulations tools used for product design, performance evaluation and its manufacturing processes in a closed loop. In addition to that having a comprehensive knowledgebase that provides systematic knowledge guided assistance to product or process designers who may not possess in-depth design knowledge or in-depth knowledge of the simulation tools, would significantly speed up the end-to-end design process. In this paper, we propose a process and illustrate a case for achieving an integrated product and manufacturing process design assisted by knowledge support for the user to make decisions at various stages. We take transmission component design as an example. The example illustrates the design of a gear for its geometry, material selection and its manufacturing processes, particularly, carburizing-quenching and tempering, and feeding the material properties predicted during heat treatment into performance estimation in a closed loop. It also identifies and illustrates various decision stages in the integrated life cycle and discusses the use of knowledge engineering tools such as rule-based guidance, to assist the designer make informed decisions. Simulation tools developed on various commercial, open-source platforms as well as in-house tools along with knowledge engineering tools are linked to build a framework with appropriate navigation through user-friendly interfaces. This is illustrated through examples in this paper.

Enhancing Learning Outcomes with an Interactive Knowledge-Based Learning Environment Providing Narrative Feedback

ERIC Educational Resources Information Center

Stranieri, Andrew; Yearwood, John

2008-01-01

This paper describes a narrative-based interactive learning environment which aims to elucidate reasoning using interactive scenarios that may be used in training novices in decision-making. Its design is based on an approach to generating narrative from knowledge that has been modelled in specific decision/reasoning domains. The approach uses a…

Characterizing Teaching Assistants' Knowledge and Beliefs Following Professional Development Activities within an Inquiry-Based General Chemistry Context

ERIC Educational Resources Information Center

Wheeler, Lindsay B.; Maeng, Jennifer L.; Whitworth, Brooke A.

2017-01-01

The purpose of this investigation was to explore changes in undergraduate and graduate teaching assistants' (TAs') content knowledge and beliefs about teaching within the context of an inquiry-based laboratory course. TAs received professional development (PD), which was informed by the TA training literature base and was designed for TAs…

PCK: How Teachers Transform Subject Matter Knowledge.

ERIC Educational Resources Information Center

Veal, William R.; van Driel, Jan; Hulshof, Hans

2001-01-01

Review of book on the concept of pedagogical content knowledge (PCK), including chapters reviewing an extensive body of research on the knowledge base for teaching, especially science, and the application of PCK to the design of elementary and secondary school science teacher-education programs. (PKP)

Knowledge-based nursing diagnosis

NASA Astrophysics Data System (ADS)

Roy, Claudette; Hay, D. Robert

1991-03-01

Nursing diagnosis is an integral part of the nursing process and determines the interventions leading to outcomes for which the nurse is accountable. Diagnoses under the time constraints of modern nursing can benefit from a computer assist. A knowledge-based engineering approach was developed to address these problems. A number of problems were addressed during system design to make the system practical extended beyond capture of knowledge. The issues involved in implementing a professional knowledge base in a clinical setting are discussed. System functions, structure, interfaces, health care environment, and terminology and taxonomy are discussed. An integrated system concept from assessment through intervention and evaluation is outlined.